WorldWideScience

Sample records for preliminary eia estimates

  1. EIA completes corrections to drilling estimates series

    Energy Technology Data Exchange (ETDEWEB)

    Trapmann, W.; Shambaugh, P. [Energy Information Administration, Washington, DC (United States)

    1998-11-23

    The Energy Information Administration (EIA) has published monthly and annual estimates of US oil and gas drilling activity since 1978. These data are key information for many industry analysts, serving as a leading indicator of trends in the industry and a barometer of general industry status. They are assessed directly for trends, as well as in combination with other measures to assess the productivity and profitability of upstream industry operations. They are major reference points for federal and state policymakers. EIA does not itself collect drilling activity data. Instead, it relies on an external source for data on oil, bas, and dry well completions. These data are provided to EIA monthly on an as reported basis. During a recent effort to enhance EIA`s well completion data system, the detection of unusual patterns in the well completion data as received led to an expanded examination of these data. Substantial discrepancies between the data as received by EIA and correct record counts since 1987 were identified. For total wells by year, the errors ranged up to more than 2,300 wells, 11% of the 1995 total, and the impact of these errors extended backward in time to at least the early 1980s. When the magnitude and extent of the as reported well completion data problem were confirmed, EIA suspended its publication and distribution of updated drilling data. EIA staff proceeded to acquire replacement files with the as reported records and then revise the statistical portion of its drilling data system to reflect the new information. The replacement files unfortunately also included erroneous data based on the improper allocation of wells between exploration and development. EIA has now resolved the two data problems and generated revised time series estimates for well completions and footage drilled. The paper describes the problems in the data, differences between the series, and maintaining future data quality.

  2. Simplified Method for Preliminary EIA of WE Installations based on Newtechnology Classification

    DEFF Research Database (Denmark)

    Margheritini, Lucia

    2010-01-01

    The Environmental Impact Assessment (EIA) is an environmental management instrument implemented worldwide. Full scale WECs are expected to be subjects to EIA. The consents application process can be a very demanding for Wave Energy Converters (WECs) developers. The process is possibly aggravated ...

  3. End-use taxes: Current EIA practices

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-17

    There are inconsistencies in the EIA published end-use price data with respect to Federal, state, and local government sales and excise taxes; some publications include end-use taxes and others do not. The reason for including these taxes in end-use energy prices is to provide consistent and accurate information on the total cost of energy purchased by the final consumer. Preliminary estimates are made of the effect on prices (bias) reported in SEPER (State Energy Price and Expenditure Report) resulting from the inconsistent treatment of taxes. EIA has undertaken several actions to enhance the reporting of end-use energy prices.

  4. EIA screening in Denmark

    DEFF Research Database (Denmark)

    Nielsen, Eskild Holm; Christensen, Per; Kørnøv, Lone

    2005-01-01

    The article points out that EIA screening is effectively a regulatory instrument and it can be a cost-effective instrument with environmental benefits.......The article points out that EIA screening is effectively a regulatory instrument and it can be a cost-effective instrument with environmental benefits....

  5. [Equine Infectious Anemia (EIA)].

    Science.gov (United States)

    Kaiser, A; Meier, H P; Straub, R; Gerber, V

    2009-04-01

    Equine Infectious Anemia (EIA) is a reportable, eradicable epizootic disease caused by the equine lentivirus of the retrovirus family which affects equids only and occurs worldwide. The virus is transmitted by blood, mainly by sanguivorous insects. The main symptoms of the disease are pyrexia, apathy, loss of body condition and weight, anemia, edema and petechia. However, infected horses can also be inapparent carriers without any overt signs. The disease is diagnosed by serological tests like the Coggins test and ELISA tests. Presently, Switzerland is offi cially free from EIA. However, Switzerland is permanently at risk of introducing the virus as cases of EIA have recently been reported in different European countries.

  6. EIA publications directory 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-20

    Enacted in 1977, the Department of Energy (DOE) Organization Act established the Energy Information Administration (EIA) as the Department`s independent statistical and analytical agency, with a mandate to collect and publish data and prepare analyses on energy production, consumption, prices, resources, and projections of energy supply and demand. This edition of the EIA Publications Directory contains titles and abstracts of periodicals and one-time reports produced by EIA from January through December 1994. The body of the Directory contains citations and abstracts arranged by broad subject categories: metadata, coal, oil and gas, nuclear, electricity, renewable energy/alternative fuels, multifuel, end-use consumption, models, and forecasts.

  7. EIA publications directory 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    This edition of the EIA Publications Directory contains titles and abstracts of periodicals and one-time reports produced by the Energy Information Administration (EIA) from January through December 1996. The body of the Directory contains citations and abstracts arranged by broad subject categories; metadata, coal, oil and gas, nuclear, electricity, renewable and energy/alternative fuels, multifuel, end-use consumption, models, and forecasts.

  8. EIA publications directory 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This edition of the EIA Publications Directory contains 68 titles and abstracts of periodicals and one time reports produced by EIA from January through December 1997. The body of the Directory contains citations and abstracts arranged by broad subject categories; (1) MetaData, (2) Coal, (3) Oil (4) Natural gas, (5) Nuclear, (6) Electricity, (7) Renewable energy and Alternative fuels, (8) Multifuel, (9) End use consumption, (10) Models, and (11) Forecasts.

  9. EIA Publications Directory 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This directory contains abstracts and ordering information for individual issues of semiannual, annual, biennial, and triennial Energy Information Administration (EIA) periodicals, analysis reports, Service Reports, and model documentations. This edition covers periodicals and one-time reports produced by EIA from January through December 1995. The citations and abstracts are arranged by broad subject categories: metadata, coal, oil/gas, nuclear, electricity, renewable energy/alternative fuels, multifuel, end-use consumption, models, and forecasts. Indexes are provided.

  10. EIA publications directory, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-06-24

    This directory contains abstracts and ordering information for EIA publications. The abstracts are arranged by broad subject category such as coal, petroleum, natural gas, and electric power. A comprehensive subject index, a title index, and a report number index are included. Each entry gives the title, report number, publication frequency, date, number of pages, and ordering information. Publication began with the 1979 edition.

  11. EIA new releases, November--December 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-09

    Thus publication contains information compiled by the Energy information administration (EIA) on the following topics: heating fuel supplies; alternative fuel vehicles; natural gas production; clean air laws and coal transportation; EIA`s world Wide Web Site; EIA`s CD-ROM; Press Releases; Microfiched products; electronic publishing; new reports; machine-readable files; how to order EIA publications; and Energy Data Information Contracts.

  12. An analytical history of EIA

    Energy Technology Data Exchange (ETDEWEB)

    Kent, C.A. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    This article traces the development of the Energy Information Administration (EIA) from 1974, the inception of its precursor, an office within the Federal Energy Administration, to its current form as an independent agency within the US Department of Energy (DOE). EIA amalgamated the energy-related activities of over 50 separate agencies, when it was chartered in DOE in 1977, [open quotes]to collect, evaluate, assemble, and analyze energy information...[close quotes] Six tensions have characterized the agency during its history: data quality, the role of modeling, confidentiality of data, resources and requirements, the independence of EIA, and timeliness vs. accuracy. 95 refs.

  13. Critical factors for EIA implementation

    DEFF Research Database (Denmark)

    Zhang, Jasmine; Kørnøv, Lone; Christensen, Per

    2013-01-01

    between different critical factors and how they relate to different stages in the EIA and thus influence the decision making process. After reviewing 33 refereed journal articles published between 1999 and 2011, we identified 203 notions of critical factors. Of these, 102 related to different stages...

  14. EIA new releases, July--August, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-02

    This publication identifies energy related publications of the Energy Information Administration of the US Department of Energy. The topics and articles in this issue include data on residential energy use available on diskettes and Internet, natural gas price predictions, coal deliveries to electric utilities, growth in the US uranium industry, microfiche products, features and press releases, EIA`s electronic publishing system, new reports, machine-readable files, how to order EIA publications and energy data information contacts.

  15. Dutch Energy Investment Allowance (EIA). Energy List for 2013; Energie-investeringsaftrek (EIA). Energielijst 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-01-15

    The Energy Investment Allowance (EIA) is a tax system by means of which the Dutch government supports companies with investments in energy-saving equipment and renewable energy. This brochure explains the assets eligible for EIA and how the scheme works [Dutch] De Energie-investeringsaftrek (EIA) is een fiscale regeling waarmee de overheid ondersteuning biedt voor bedrijven bij investeringen in energiebesparende bedrijfsmiddelen en duurzame energie. In deze brochure wordt uitgelegd welke bedrijfsmiddelen in aanmerking komen voor EIA en hoe de regeling werkt.

  16. Preliminary evaluation of vector flow and spectral velocity estimation

    DEFF Research Database (Denmark)

    Pedersen, Mads Møller; Pihl, Michael Johannes; Haugaard, Per

    Spectral estimation is considered as the golden standard in ultrasound velocity estimation. For spectral velocity estimation the blood flow angle is set by the ultrasound operator. Vector flow provides temporal and spatial estimates of the blood flow angle and velocity. A comparison of vector flow...... agrees with the spectral flow angle. The vector velocity estimates agrees with the spectral estimates at PS and ED. From preliminary data it is concluded that vector flow angle estimation can replace the operator-dependent angle correction used for spectral velocity estimation....... estimation and spectral estimates is presented. The variation of the blood flow angle and the effect on the velocity estimate is investigated. The right common carotid arteries of three healthy volunteers were scanned. Real-time spectral and vector flow data were obtained simultaneously from one range gate...

  17. EIA modelling for CZM applications. Part 1

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Babu, M.T.

    stream_size 12 stream_content_type text/plain stream_name Summer_Sch_EIA_Manage_Coast_Zone_2001_84.pdf.txt stream_source_info Summer_Sch_EIA_Manage_Coast_Zone_2001_84.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

  18. EIA of anthropogenic activities on marine macrobenthos

    Digital Repository Service at National Institute of Oceanography (India)

    Govindan, K.

    stream_size 12 stream_content_type text/plain stream_name Summer_Sch_EIA_Mgmt_Coastal_Zone_Trg_Manual_158.pdf.txt stream_source_info Summer_Sch_EIA_Mgmt_Coastal_Zone_Trg_Manual_158.pdf.txt Content-Encoding ISO-8859-1 Content...-Type text/plain; charset=ISO-8859-1 ...

  19. EIA model documentation: Electricity market module - electricity fuel dispatch

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    This report documents the National Energy Modeling System Electricity Fuel Dispatch Submodule (EFD), a submodule of the Electricity Market Module (EMM) as it was used for EIA`s Annual Energy Outlook 1997. It replaces previous documentation dated March 1994 and subsequent yearly update revisions. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, model source code, and forecast results generated through the synthesis and scenario development based on these components. This document serves four purposes. First, it is a reference document providing a detailed description of the model for reviewers and potential users of the EFD including energy experts at the Energy Information Administration (EIA), other Federal agencies, state energy agencies, private firms such as utilities and consulting firms, and non-profit groups such as consumer and environmental groups. Second, this report meets the legal requirement of the Energy Information Administration (EIA) to provide adequate documentation in support of its statistical and forecast reports. Third, it facilitates continuity in model development by providing documentation which details model enhancements that were undertaken for AE097 and since the previous documentation. Last, because the major use of the EFD is to develop forecasts, this documentation explains the calculations, major inputs and assumptions which were used to generate the AE097.

  20. A review of EIAs on trade policy in China: Exploring the way for economic policy EIAs

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Xianqiang, E-mail: maoxq@bnu.edu.cn [Center for Global Environmental Policy, School of Environment, Beijing Normal University, Beijing 100875 (China); Song, Peng, E-mail: songpeng_ee@163.com [Center for Global Environmental Policy, School of Environment, Beijing Normal University, Beijing 100875 (China); Kørnøv, Lone, E-mail: lonek@plan.aau.dk [The Danish Centre for Environmental Assessment, Department of Planning, Aalborg University, Skibbrogade 5, B1-04, 9000 Aalborg (Denmark); Corsetti, Gabriel, E-mail: gabriel.corsetti@gmail.com [Center for Global Environmental Policy, School of Environment, Beijing Normal University, Beijing 100875 (China)

    2015-01-15

    During the discussion on the “Environmental Protection Law Amendment (draft)” in 2011, it was decided to drop the proposed clauses related to environmental impact assessments (EIAs) on policy, which means that there remained no provisions for policy EIAs, and China's strategic environmental assessment system stayed limited to the planning level. However, considering that economic policy making is causing significant direct and indirect environmental problems and that almost every aspect of governmental policy has an economic aspect, EIAs on economic policies are of the utmost urgency. The purpose of this study is to review the EIA work that has been carried out on trade policy in China through four case studies, and illustrate how trade policy EIAs can be helpful in achieving better environmental outcomes in the area of trade. Through the trade policy EIA case studies we try to argue for the feasibility of conducting EIAs on economic policies in China. We also discuss the implications of the case studies from the point of view of how to proceed with EIAs on economic policy and how to promote their practice. - Highlights: • SEA system is incomplete and stays limited to the plan EIA level in China. • EIA on economic policy is of utmost importance for all the developing countries. • Four case studies of trade policy EIA in China are reviewed for policy implications. • Departmental competition for political power impedes economic policy EIAs in China. • Legislative regulation on policy EIA is the first thing needed to overcome barrier.

  1. He'eia Stream Contaminants Study

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Potential risk to ecological receptors in He’eia Stream and Wetland was characterized through the use of a food-web model to predict effects to the Hawaiian stilt,...

  2. Climate change in EIA - Inspiration from practice

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2013-01-01

    Environmental Assessments of plans and programmes (SEA). However, EIAs and SEAs are already being made, which integrate climate change, and for some aspects this practice has evolved over a long period. This paper seeks to explore this practice and find inspiration from the work with climate change already...... taking place. For exploring the praxis of integrating climate change in practice a document study of 100 Danish EIA reports is carried out. From these reports, statistics and examples are drawn. The study shows an emphasis on integration of climate change mitigation, using various quantitative tools......Climate change integration has been a topic of much interest in the field of impact assessment for a period, and thus far quite some emphasis has been put on discussions of purpose, relevance and overall approaches in both Environmental Impact Assessment of projects (EIA) and Strategic...

  3. Climate change in EIA - Inspiration from practice

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen

    2013-01-01

    taking place. For exploring the praxis of integrating climate change in practice a document study of 100 Danish EIA reports is carried out. From these reports, statistics and examples are drawn. The study shows an emphasis on integration of climate change mitigation, using various quantitative tools......Climate change integration has been a topic of much interest in the field of impact assessment for a period, and thus far quite some emphasis has been put on discussions of purpose, relevance and overall approaches in both Environmental Impact Assessment of projects (EIA) and Strategic...... Environmental Assessments of plans and programmes (SEA). However, EIAs and SEAs are already being made, which integrate climate change, and for some aspects this practice has evolved over a long period. This paper seeks to explore this practice and find inspiration from the work with climate change already...

  4. Danish experiences on EIA of livestock projects

    DEFF Research Database (Denmark)

    Christensen, Per

    2006-01-01

    Since its introduction into Danish planning in 1989, Environmental Impact Assessment (EIA) has been widely discussed. At the centre of the debate has been the question of whether EIA actually offered anything new and there has been a great deal of scepticism about the efficacy of the instrument...... sustainable development. Although the provisions laid down are the same the praxis related to the field has developed at a considerable speed. In order to understand this development we have closely examined how the decisions made by the Nature Protection Board of Appeal (NPBA) have been changed and conclude...

  5. EIA new releases: January--February 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-01

    Major stories in this issue are: Major energy companies` strategies shift from growth to consolidation; Report assesses the oil and gas resources of Fergana Basin, Former Soviet Union; Natural gas wellhead prices expected to remain low in first half 1995; Reliability and the changing electric power industry; EIA updates reference on US coal; Decommissioning of US uranium production facilities examined by EIA; and Improved technology leads to lower energy price projections. The remaining part of the bulletin lists recent publications, including machine readable files, and contacts for energy data information.

  6. Preliminary Cost Estimates of Pollution Control Technologies for Geothermal Developments

    Energy Technology Data Exchange (ETDEWEB)

    Sung, R.; Houser, G.; Richard, G.; Cotter, J.; Weller, P.; Pulaski, E.

    1979-10-01

    This is the first report from the EPA estimating the cost of technology for mitigating pollution that might arise from geothermal power systems. The Environmental Protection Agency (EPA) has taken an initial step towards the establishment of regulatory standards for the geothermal industry by preparing a document entitled Pollution Control Guidance for Geothermal Energy Development. This report supports that document by providing pollution control cost information. The objective of this report is to provide preliminary cost estimates for air and water pollution treatment and disposal technologies applicable for geothermal energy conversion systems. Cost estimates include both annualized capital investment and operation and maintenance (O&M) costs for various levels of environmental requirements. [DJE-2005

  7. EIA screening and nature protection in Denmark

    DEFF Research Database (Denmark)

    Christensen, Per; Kørnøv, Lone

    2011-01-01

    , and that the main cause for this is not EIA regulations as such, but the positive role which the implementation of the Natura 2000 objectives has played in this development. However, it was also found that the formulation of demands varies greatly between the counties, thus often resulting in ambiguity and leaving...

  8. Dutch Energy Investment Allowance (EIA). Annual report 2012; Energie-Investeringsaftrek (EIA). Jaarverslag 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-07-15

    By means of the Energy Investment Allowance (EIA) the Ministry of Economic Affairs supports investments of businesses, industrial associations and other parties in accelerating innovative, energy saving sustainable initiatives and technologies. In this report the results for 2012 are presented [Dutch] Met de EIA ondersteunt het Ministerie van Economische Zaken bedrijven bij het investeren in innovatieve, energiebesparende en duurzame technieken. In dit verslag over 2012 worden resultaten weergegeven.

  9. Energy Information Administration (EIA) new releases, January--February 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    This report is the Jan-Feb 1994 issue of the Energy Information Administration (EIA) New Releases publication. Highlighted articles include: efficiency gains slow growth in U.S. energy demand, dependency on oil imports continues to climb; new EIA report details status of U.S. coal industry; EIA assesses residential vehicle fuel consumption in the U.S.; EIA plans new survey on alternative-fuel vehicles.

  10. Is EIA part of the wind power planning problem?

    Energy Technology Data Exchange (ETDEWEB)

    Smart, Duncan Ewan; Stojanovic, Timothy A., E-mail: tas21@st-andrews.ac.uk; Warren, Charles R.

    2014-11-15

    This research evaluates the importance and effectiveness of Environmental Impact Assessment (EIA) within wind farm planning debates, drawing on insights from case studies in Scotland. Despite general public support for renewable energy on the grounds that it is needed to tackle climate change and implement sustainable development, many proposed wind farms encounter significant resistance. The importance of planning issues and (EIA) processes has arguably been overlooked within recent wind farm social acceptability discourse. Through semi-structured interviews with key stakeholders and textual analysis of EIA documents, the characteristics of EIA are assessed in terms of its perceived purpose and performance. The data show that whilst respondents perceive EIA to be important, they express concerns about bias and about the inability of EIA to address climate change and wind farm decommissioning issues adequately. Furthermore, the research identifies key issues which impede the effectiveness of EIA, and reveals differences between theoretical and practical framings of EIA. The paper questions the assumption that EIA is a universally applicable tool, and argues that its effectiveness should be analysed in the context of specific development sectors. The article concludes by reviewing whether the recently amended EIA Directive (2014/52/EU) could resolve identified problems within national EIA practice. - Highlights: • Evaluation of EIA for onshore wind farm planning in Scotland. • EIA is important for multiple aspects of onshore wind farm planning. • Multiple substantive deficiencies of relevance to wind farm planning exist in EIA. • Further research into EIA effectiveness for specific development types is required. • Directive 2014/52/EU may improve EIA effectiveness within wind farm planning.

  11. A multicenter evaluation of the Biotest legionella urinary antigen EIA

    DEFF Research Database (Denmark)

    Harrison, Timothy; Uldum, Søren; Alexiou-Daniel, Stella;

    1998-01-01

    OBJECTIVES: To undertake a multicenter study to evaluate the Biotest legionella urinary antigen enzyme immunoassay (EIA) performance against those EIAs already in use in 14 European laboratories. METHODS: Each laboratory examined urine specimens from appropriate patients using both their current...... in the laboratories' current EIAs, and in 94.6% of those specimens which were positive for Legionella pneumophila serogroup 1. CONCLUSION: The Biotest EIA is simple to use and specific and the results obtained in different laboratories show excellent agreement. The assay compares well existing EIAs, at least for L...

  12. Preliminary Test Estimators and Phi-divergence Measures in Pooling Binomial Data

    Directory of Open Access Journals (Sweden)

    N. Martin

    2012-07-01

    Full Text Available Two independent random samples are drawn from two Binomial populations with parameters theta1 and  theta2 respectively. Ahmed (1991 considered a preliminary test estimator based on maximum likelihood estimator for estimating theta1 when it is suspected that theta1=theta2.  In this paper we combine minimum phi-divergence estimators as well as phi-divergence test statistics in order to define a preliminary phi-divergence test estimators. These new estimators are compared with the classical estimator as well as the pooled estimator.

  13. An assessment of the quality of selected EIA data series: Coal data, 1983--1988

    Energy Technology Data Exchange (ETDEWEB)

    1991-11-25

    The purpose of this report is to present information on the quality of some of the Energy Information Administration`s (EIA) coal data. This report contains discussions of data on production, direct labor hours, recoverable reserves, and prices from 1983 through 1988. Chapter 2 of this report presents a summary of the EIA coal data collection and identifies other sources providing similar data. Chapters 3 and 4 focus on data on coal production and direct labor hours, respectively. Detailed comparisons with data from the Mine Safety and Health Administration (MSHA) and State mining agencies are presented. Chapter 5 examines recoverable reserves. Included are internal comparisons as well as comparisons with other published reserve-related data, namely those of BXG, Inc. Chapter 6 describes how EIA obtains estimates of coal prices and discusses the variability in the prices caused by factors such as mine type, coal rank, and region. 5 figs., 5 tabs.

  14. Analysis of environmental impact assessment (EIA) system in Turkey.

    Science.gov (United States)

    Coşkun, Aynur Aydın; Turker, Ozhan

    2011-04-01

    The Environmental Impact Assessment (EIA) System, which embodies the "prevention principle" of the environmental law, is an important tool for environmental protection. This tool has a private importance for Turkey since it is a developing country, and it entered the Turkish law in 1983 with the Environmental Law. Besides, the EIA Regulation, which shows the application principles, became effective in 1993. Because Turkey is a candidate for European Union (EU), the EIA Regulation has been changed due to the EU compliance procedure, and its latest version became valid in 2008. This study aims to emphasize The EIA system in Turkey to supervise the efficiency of this procedure and point the success level. In the introduction part, general EIA concept, its importance, and some notations are mentioned. Following that, the legislation, which builds the EIA system, has been analyzed starting from the 1982 Turkish Constitution. Then, the legislation rules are explained due to the basic steps of the EIA procedure. In order to shed light upon the application, the EIA final decisions given until today, the results, and their distributions to the industries are assessed. In the final part of the study, a SWOT analysis is made to mention the weaknesses, strengths, opportunities, and threats of the EIA system in Turkey.

  15. Annual report of the origin of natural gas liquids production form EIA-64A

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The collection of basic, verifiable information on the Nation`s reserves and production of natural gas liquids (NGL) is mandated by the Federal Energy Administration Act of 1974 (FEAA) (Public Law 93-275) and the Department of Energy Organization Act of 1977 (Public Law 95-91). Gas shrinkage volumes reported on Form EIA-64A by natural gas processing plant operators are used with natural gas data collected on a {open_quotes}wet after lease separation{close_quotes} basis on Form EIA-23, Annual Survey of Domestic Oil and Gas Reserves, to estimate {open_quotes}dry{close_quotes} natural gas reserves and production volumes regionally and nationally. The shrinkage data are also used, along with the plant liquids production data reported on Form EIA-64A, and lease condensate data reported on Form EIA-23, to estimate regional and national gas liquids reserves and production volumes. This information is the only comprehensive source of credible natural gas liquids data, and is required by DOE to assist in the formulation of national energy policies.

  16. EIA modelling for coastal zone management. Part 2

    Digital Repository Service at National Institute of Oceanography (India)

    Babu, M.T.; Vethamony, P.

    stream_size 15 stream_content_type text/plain stream_name Summer_Sch_EIA_Manage_Coast_Zone_2001_95.pdf.txt stream_source_info Summer_Sch_EIA_Manage_Coast_Zone_2001_95.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

  17. Preliminary estimate of natural resource damage : Rocky Mountain Arsenal Superfund Site

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a preliminary estimate of natural resource damages associated with uncontrolled release of hazardous materials at the Rocky Mountain Arsenal Superfund Site...

  18. EIA directory of electronic products. Third quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    The Energy Information Administration (EIA) makes available for public use a series of machine-readable data files and computer models. The data files and models are made available to the public on magnetic tapes. In addition, selected data files/models are available on diskette for IBM-compatible personal computers. EIA, as the independent statistical and analytical branch of the Department of Energy, provides assistance to the general public through the National Energy Information Center (NEIC). Inquirers may telephone NEIC`s information specialists at (202) 586-8800 with any data questions relating to the content of EIA Directory of Electronic Products.

  19. Observation of EIA in closed and open caesium atomic system

    Institute of Scientific and Technical Information of China (English)

    Zhao Jian-Ming; Zhao Yan-Ting; Huang Tao; Xiao Lian-Tuan; Jia Suo-Tang

    2005-01-01

    We present an experimental study on electromagnetically induced absorption (EIA) in the closed transition of a degenerate two-level Cs atomic system. The coupling and probe lasers coupled with the transition 6S1/2F=4 →6P3/2F'=5 of caesium atom. The signal of EIA was obtained and the frequency detuning and intensity effect of the pumping laser were experimentally investigated. The EIA signal in 6S1/2 F=4 → 6P3/2 F'=4 and 6S1/2 F=4 → 6P3/2F'=3 open transitions was also obtained. As the repumping laser couples with the transition of 6S1/2 F=3 → 6P3/2F'=4, the EIA signal is increased due to the hyperfine optical pumping.

  20. Environmental Impact Assessment (Eia) On Project Design: An ...

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-09-01

    Sep 1, 2013 ... 2Information Management Technology, Federal University Of Technology Owerri, Imo ... The phases in project design were analyzed as to the impacts of EIA exercise on their ...... proper execution of developmental projects.

  1. EIA publication manual: Fourth edition. [Energy information manuals

    Energy Technology Data Exchange (ETDEWEB)

    Neef, C.A.

    1988-01-01

    This is the fourth edition of the Publications Manual. It was written to help the staff of the Energy Information Administration (EIA) who are involved in the production process to create and format uniform publications that not only provide information, but readily identify the agency. The manual reflects the substantial changes that have taken place to streamline methods of producing EIA publications over the past few years. Whereas the first edition, in 1979, was written for writers and typists which struggled with producing reports on manual typewriters, this report now reflects the increased use of automation in preparing most EIA publications. EIA has a fully automated photocomposition publishing system. Many of the style features discussed in this manual are automatically produced using EPIC/ICEF2. The need for format sheets and illustrations produced by graphic artists has been significantly reduced. However, the basic style has changed very little. EIA style continues to be based on the Government Printing Office Style Manual with some deviations tailored specifically for EIA.

  2. Preliminary results on uncertainties in rainfall interception estimation

    Energy Technology Data Exchange (ETDEWEB)

    Muzylo, A.; Llorens, P.; Domingo, F.; Valente, Fe.; Beven, K.; Gallart, F.

    2009-07-01

    This work deals with some aspects of rainfall interception estimation uncertainty in a deciduous forest. The importance of interception loss measurement error is stressed. Confidence limits of Rutter original and sparse interception model parameters obtained from regressions for leafed and leafless period are presented, as well as free throughfall coefficient variability with event weather conditions. (Author) 8 refs.

  3. 43 CFR 11.38 - Assessment Plan-preliminary estimate of damages.

    Science.gov (United States)

    2010-10-01

    ... damages. 11.38 Section 11.38 Public Lands: Interior Office of the Secretary of the Interior NATURAL RESOURCE DAMAGE ASSESSMENTS Assessment Plan Phase § 11.38 Assessment Plan—preliminary estimate of damages... resources, if the authorized official intends to include compensable value in the damage claim....

  4. Appraising the value of independent EIA follow-up verifiers

    Energy Technology Data Exchange (ETDEWEB)

    Wessels, Jan-Albert, E-mail: janalbert.wessels@nwu.ac.za [School of Geo and Spatial Sciences, Department of Geography and Environmental Management, North-West University, C/O Hoffman and Borcherd Street, Potchefstroom, 2520 (South Africa); Retief, Francois, E-mail: francois.retief@nwu.ac.za [School of Geo and Spatial Sciences, Department of Geography and Environmental Management, North-West University, C/O Hoffman and Borcherd Street, Potchefstroom, 2520 (South Africa); Morrison-Saunders, Angus, E-mail: A.Morrison-Saunders@murdoch.edu.au [School of Geo and Spatial Sciences, Department of Geography and Environmental Management, North-West University, C/O Hoffman and Borcherd Street, Potchefstroom, 2520 (South Africa); Environmental Assessment, School of Environmental Science, Murdoch University, Australia. (Australia)

    2015-01-15

    Independent Environmental Impact Assessment (EIA) follow-up verifiers such as monitoring agencies, checkers, supervisors and control officers are active on various construction sites across the world. There are, however, differing views on the value that these verifiers add and very limited learning in EIA has been drawn from independent verifiers. This paper aims to appraise how and to what extent independent EIA follow-up verifiers add value in major construction projects in the developing country context of South Africa. A framework for appraising the role of independent verifiers was established and four South African case studies were examined through a mixture of site visits, project document analysis, and interviews. Appraisal results were documented in the performance areas of: planning, doing, checking, acting, public participating and integration with other programs. The results indicate that independent verifiers add most value to major construction projects when involved with screening EIA requirements of new projects, allocation of financial and human resources, checking legal compliance, influencing implementation, reporting conformance results, community and stakeholder engagement, integration with self-responsibility programs such as environmental management systems (EMS), and controlling records. It was apparent that verifiers could be more creatively utilized in pre-construction preparation, providing feedback of knowledge into assessment of new projects, giving input to the planning and design phase of projects, and performance evaluation. The study confirms the benefits of proponent and regulator follow-up, specifically in having independent verifiers that disclose information, facilitate discussion among stakeholders, are adaptable and proactive, aid in the integration of EIA with other programs, and instill trust in EIA enforcement by conformance evaluation. Overall, the study provides insight on how to harness the learning opportunities

  5. EIA directory of electronic products, first quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    The Energy Information Administration (EIA) makes available for public use a series of machine-readable data files and computer models. The data files and models are made available to the public on magnetic tapes. In addition, selected data files/models are available on diskette for IBM-compatible personal computers. EIA, as the independent statistical and analytical branch of the Department of Energy, provides assistance to the general public through the National Energy Information Center (NEIC). For each product listed in this directory, a detailed abstract is provided which describes the data published. Specific technical questions may be referred to the appropriate contact person.

  6. EIA directory of electronic products. First quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The Energy Information Administration (EIA) makes available for public use a series of machine-readable data files and computer models. The data files and models are made available to the public on magnetic tapes. In addition, selected data files/models are available on diskette for IBM-compatible personal computers.

  7. EIA directory of electronic products. Fourth quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The Energy Information Administration (EIA) makes available for public use a series of machine-readable data files and computer models. The data files and models are made available to the public on magnetic tapes. In addition, selected data files/models are available on diskette for IBM-compatible personal computers.

  8. EIA directory of electronic products, Third quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    EIA makes available for public use a series of machine-readable data files and computer models on magnetic tapes. Selected data files/models are also available on diskette for IBM-compatible personal computers. For each product listed in this directory, a detailed abstract is provided which describes the data published. Ordering information is given in the preface. Indexes are included.

  9. 31 CFR 26.3 - Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental...

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Availability of Environmental Impact Assessment Summaries (EIA Summaries) and Environmental Impact Assessments (EIAs). 26.3 Section 26.3 Money and... DEVELOPMENT BANDS (MDBs) § 26.3 Availability of Environmental Impact Assessment Summaries (EIA Summaries) and...

  10. EIA directory of electronic products fourth quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-23

    The Energy Information Administration (EIA) makes available for public use a series of machine-readable data files and computer models. The data files and models are made available to the public on magnetic tapes. In addition, selected data files/models are available on diskette for IBM-compatible personal computers. For each product listed in this directory, a detailed abstract is provided which describes the data published.

  11. Editing of EIA coded, numerically controlled, machine tool tapes

    Science.gov (United States)

    Weiner, J. M.

    1975-01-01

    Editing of numerically controlled (N/C) machine tool tapes (8-level paper tape) using an interactive graphic display processor is described. A rapid technique required for correcting production errors in N/C tapes was developed using the interactive text editor on the IMLAC PDS-ID graphic display system and two special programs resident on disk. The correction technique and special programs for processing N/C tapes coded to EIA specifications are discussed.

  12. Preliminary age, growth and maturity estimates of spotted ratfish (Hydrolagus colliei) in British Columbia

    Science.gov (United States)

    King, J. R.; McPhie, R. P.

    2015-05-01

    The spotted ratfish (Hydrolagus colliei) is a chimaeroid ranging from southeast Alaska to Baja California and found at depths of up to 1029 m. Despite being widespread and ubiquitous, few biological parameter estimates exist for spotted ratfish due to a lack of suitable ageing structures to estimate age and growth. We present preliminary results of age, growth and maturity estimates based on a new method in which tritor ridges are counted on the vomerine tooth plate. We also provide a method for estimating the number of worn tritor ridges based on tooth plate diameter measurements for the spotted ratfish. The tritor ridges are distinct bumps that are easy to identify and precision estimates between readers suggests that this method is transferable. Tritor ridges are a potential structure for estimating age in H. colliei and we provide recommendations for future research to improve the method. We sampled 269 spotted ratfish captured in trawl surveys off the coast British Columbia ranging in size from 74 to 495 mm in precaudal length (PCL). The estimated ages ranged from 2 to 16 years for males and from 2 to 21 years for females. The von Bertalanffy, von Bertalanffy with known size at birth, Gompertz and logistic growth models were fitted to the data. Based on Akaike information criterion corrected for sample size and number of parameters estimated, the logistic growth curve was selected as most suitable. The logistic growth model yielded the following parameter estimates: Linf=407.22 mm (PCL), k=0.23 year-1, t0=-7.06 years for males; L∞=494.52 mm (PCL), k=0.26 year-1, t0=-8.35 years for females. Estimated ages at 50% maturity were 12 and 14 years for males and females, respectively. Correspondingly, the size at 50% maturity estimates was smaller for males (302 mm, PCL) than females (393 mm, PCL). Both estimates are larger than those made for spotted ratfish off of California indicating regional differences in life history traits for this species. Our preliminary

  13. Experiments, conceptual design, preliminary cost estimates and schedules for an underground research facility

    Energy Technology Data Exchange (ETDEWEB)

    Korbin, G.; Wollenberg, H.; Wilson, C.; Strisower, B.; Chan, T.; Wedge, D.

    1981-09-01

    Plans for an underground research facility are presented, incorporating techniques to assess the hydrological and thermomechanical response of a rock mass to the introduction and long-term isolation of radioactive waste, and to assess the effects of excavation on the hydrologic integrity of a repository and its subsequent backfill, plugging, and sealing. The project is designed to utilize existing mine or civil works for access to experimental areas and is estimated to last 8 years at a total cost for contruction and operation of $39.0 million (1981 dollars). Performing the same experiments in an existing underground research facility would reduce the duration to 7-1/2 years and cost $27.7 million as a lower-bound estimate. These preliminary plans and estimates should be revised after specific sites are identified which would accommodate the facility.

  14. Preliminary comparison between real-time in-vivo spectral and transverse oscillation velocity estimates

    DEFF Research Database (Denmark)

    Pedersen, Mads Møller; Pihl, Michael Johannes; Haugaard, Per

    2011-01-01

    angles and std were calculated { 52±18 ; 55±23 ; 60±16 }°. Spectral angles { 52 ; 56 ; 52 }° were obtained from the B-mode images. Obtained values are: PSTO { 76±15 ; 89±28 ; 77±7 } cm/s, spectral PS { 77 ; 110 ; 76 } cm/s, EDTO { 10±3 ; 14±8 ; 15±3 } cm/s, spectral ED { 18 ; 13 ; 20 } cm/s, RITO { 0.......87±0.05 ; 0.79±0.21 ; 0.79±0.06 }, and spectral RI { 0.77 ; 0.88 ; 0.73 }. Vector angles are within ±two std of the spectral angle. TO velocity estimates are within ±three std of the spectral estimates. RITO are within ±two std of the spectral estimates. Preliminary data indicates that the TO and spectral...

  15. Preliminary comparison between real-time in-vivo spectral and transverse oscillation velocity estimates

    Science.gov (United States)

    Pedersen, Mads Møller; Pihl, Michael Johannes; Haugaard, Per; Hansen, Jens Munk; Lindskov Hansen, Kristoffer; Bachmann Nielsen, Michael; Jensen, Jørgen Arendt

    2011-03-01

    Spectral velocity estimation is considered the gold standard in medical ultrasound. Peak systole (PS), end diastole (ED), and resistive index (RI) are used clinically. Angle correction is performed using a flow angle set manually. With Transverse Oscillation (TO) velocity estimates the flow angle, peak systole (PSTO), end diastole (EDTO), and resistive index (RITO) are estimated. This study investigates if these clinical parameters are estimated equally good using spectral and TO data. The right common carotid arteries of three healthy volunteers were scanned longitudinally. Average TO flow angles and std were calculated { 52+/-18 ; 55+/-23 ; 60+/-16 }°. Spectral angles { 52 ; 56 ; 52 }° were obtained from the B-mode images. Obtained values are: PSTO { 76+/-15 ; 89+/-28 ; 77+/-7 } cm/s, spectral PS { 77 ; 110 ; 76 } cm/s, EDTO { 10+/-3 ; 14+/-8 ; 15+/-3 } cm/s, spectral ED { 18 ; 13 ; 20 } cm/s, RITO { 0.87+/-0.05 ; 0.79+/-0.21 ; 0.79+/-0.06 }, and spectral RI { 0.77 ; 0.88 ; 0.73 }. Vector angles are within +/-two std of the spectral angle. TO velocity estimates are within +/-three std of the spectral estimates. RITO are within +/-two std of the spectral estimates. Preliminary data indicates that the TO and spectral velocity estimates are equally good. With TO there is no manual angle setting and no flow angle limitation. TO velocity estimation can also automatically handle situations where the angle varies over the cardiac cycle. More detailed temporal and spatial vector estimates with diagnostic potential are available with the TO velocity estimation.

  16. EIA model documentation: Petroleum market model of the national energy modeling system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-28

    The purpose of this report is to define the objectives of the Petroleum Market Model (PMM), describe its basic approach, and provide detail on how it works. This report is intended as a reference document for model analysts, users, and the public. Documentation of the model is in accordance with EIA`s legal obligation to provide adequate documentation in support of its models. The PMM models petroleum refining activities, the marketing of petroleum products to consumption regions, the production of natural gas liquids in gas processing plants, and domestic methanol production. The PMM projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil, both domestic and imported; other inputs including alcohols and ethers; natural gas plant liquids production; petroleum product imports; and refinery processing gain. In addition, the PMM estimates domestic refinery capacity expansion and fuel consumption. Product prices are estimated at the Census division level and much of the refining activity information is at the Petroleum Administration for Defense (PAD) District level.

  17. State energy data report 1994: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This document provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), operated by EIA. SEDS provides State energy consumption estimates to members of Congress, Federal and State agencies, and the general public, and provides the historical series needed for EIA`s energy models. Division is made for each energy type and end use sector. Nuclear electric power is included.

  18. Users guide to simulation with 9DGEM on the EIA/EDS computer. Volume IV. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Dorosh, P.A.; Hudson, E.A.; Parrish, J.E.

    1981-03-01

    DGEM has been assembled on the EIA/EDS system with ease of use a primary consideration. A JCL command procedure for running DGEM simulations is provided to the user. User input requirements are limited to a reasonably simple set of instructions which are handled completely by the command procedure provided. In addition, instructions for compiling and linking the Fortran codes are provided should the user desire to alter DGEM. Each of these procedures, user input requirements, and examples are given. The first section describes the simulation requirements for DGEM. The second section includes an example of the input runstream, the execute instructions, and a sample output. The third section specifies the use of the new technology sectors of the model. The fourth and fifth sections cover the use of the energy investment option and some applications of the investment linkages. The sixth section explains the way in which the program is altered and a new executable module is created. Finally, the last section describes certain deviations from the original DGEM documentation which have facilitated the use of DGEM on the EIA EDS system.

  19. Application of Boosting Regression Trees to Preliminary Cost Estimation in Building Construction Projects.

    Science.gov (United States)

    Shin, Yoonseok

    2015-01-01

    Among the recent data mining techniques available, the boosting approach has attracted a great deal of attention because of its effective learning algorithm and strong boundaries in terms of its generalization performance. However, the boosting approach has yet to be used in regression problems within the construction domain, including cost estimations, but has been actively utilized in other domains. Therefore, a boosting regression tree (BRT) is applied to cost estimations at the early stage of a construction project to examine the applicability of the boosting approach to a regression problem within the construction domain. To evaluate the performance of the BRT model, its performance was compared with that of a neural network (NN) model, which has been proven to have a high performance in cost estimation domains. The BRT model has shown results similar to those of NN model using 234 actual cost datasets of a building construction project. In addition, the BRT model can provide additional information such as the importance plot and structure model, which can support estimators in comprehending the decision making process. Consequently, the boosting approach has potential applicability in preliminary cost estimations in a building construction project.

  20. Application of Boosting Regression Trees to Preliminary Cost Estimation in Building Construction Projects

    Directory of Open Access Journals (Sweden)

    Yoonseok Shin

    2015-01-01

    Full Text Available Among the recent data mining techniques available, the boosting approach has attracted a great deal of attention because of its effective learning algorithm and strong boundaries in terms of its generalization performance. However, the boosting approach has yet to be used in regression problems within the construction domain, including cost estimations, but has been actively utilized in other domains. Therefore, a boosting regression tree (BRT is applied to cost estimations at the early stage of a construction project to examine the applicability of the boosting approach to a regression problem within the construction domain. To evaluate the performance of the BRT model, its performance was compared with that of a neural network (NN model, which has been proven to have a high performance in cost estimation domains. The BRT model has shown results similar to those of NN model using 234 actual cost datasets of a building construction project. In addition, the BRT model can provide additional information such as the importance plot and structure model, which can support estimators in comprehending the decision making process. Consequently, the boosting approach has potential applicability in preliminary cost estimations in a building construction project.

  1. Report on an analysis of selected EIA publications

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    Results of a critical analysis of the EIA publication Electric Power Monthly (EPM) are presented. A general review of the publication, a review of the tables, and a review of the graphs are given. Each of these is divided into two areas: substantive review, which concentrates on the organization and comparability of the data; and the cosmetic review, which focuses on the graphic presentations of the data. Recommendations, the rationale behind each recommendation, and examples of improvements that can be made to the various parts of the publication are discussed. (MCW)

  2. Conflicts and social impacts: EIA of renewable energy

    DEFF Research Database (Denmark)

    Larsen, Sanne Vammen; Hansen, Anne Merrild; Nielsen, Helle

    2017-01-01

    The transition to renewable energy is currently in many places challenged by conflicts over specific projects. For example siting of onshore wind turbines often causes conflicts with local communities, sometimes leading to abandonment of the project or plan. This paper presents an analysis...... of such conflicts, and the role social impacts play. The paper analyses in depth four cases of renewable energy projects, utilizing a conceptualization of conflict constituted by three elements: Attitude, behavior and contradictions. Through analysis of EIA reports and hearing responses as well as interviews...

  3. EIA Directory of Electronic Products, Second quarter 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-26

    EIA makes available for public use a series of machine-readable data files and computer models, on magnetic tapes; selected data files/models are also available on PC diskettes. The data files include: petroleum, natural gas, electricity, coal, integrated statistics, and consumption. Models include: petroleum, natural gas, electricity, coal, nuclear, and multifuel. On-line files and compact discs include: electronic publishing system, federal bulletin board, economic bulletin board, national trade data bank, national economic/social/environmental data bank, and FedWorld Gateway. For each product listed in this directory, an abstract describes the data published. Contact persons are provided, as are indexes.

  4. Development of EIA Issues in Canada and Practices in China

    Institute of Scientific and Technical Information of China (English)

    Dr. Robert C. Lao

    2004-01-01

    @@ 1 Introduction The requirement for conducting environmental impact assessment (EIA) for all economic and construction development projects and activities in Canada is based on the law. The federal government of Canada, and all provincial and territorial governments have developed relevant processes and procedures to meet this legal obligation. As early as in 1973, the federal Environmental Assessment and Review Process (EARP) was established, and in 1984 the Guidelines Order issued was by the federal cabinet which clarified roles and responsibilities of various parties and stakeholders for participating and/or implementing EARP.

  5. Road-corridor planning in the EIA procedure in Spain. A review of case studies

    Energy Technology Data Exchange (ETDEWEB)

    Loro, Manuel, E-mail: manuel.loro@upm.es [Department of Urban and Regional Planning and Environment, Civil Engineering School, Universidad Politécnica de Madrid, Prof. Aranguren s/n, 28040 Madrid (Spain); Transport Research Centre (TRANSyT-UPM) Universidad Politécnica de Madrid, ETSI Caminos, Canales y Puertos, Prof. Aranguren s/n, 28040 Madrid (Spain); Centro de investigación del transporte, TRANSyT-UPM, ETSI Caminos, Canales y Puertos, Universidad Politécnica de Madrid, Prof. Aranguren s/n, 28040 Madrid (Spain); Arce, Rosa M., E-mail: rosa.arce.ruiz@upm.es [Department of Urban and Regional Planning and Environment, Civil Engineering School, Universidad Politécnica de Madrid, Prof. Aranguren s/n, 28040 Madrid (Spain); Transport Research Centre (TRANSyT-UPM) Universidad Politécnica de Madrid, ETSI Caminos, Canales y Puertos, Prof. Aranguren s/n, 28040 Madrid (Spain); Centro de investigación del transporte, TRANSyT-UPM, ETSI Caminos, Canales y Puertos, Universidad Politécnica de Madrid, Prof. Aranguren s/n, 28040 Madrid (Spain); Ortega, Emilio, E-mail: e.ortega@upm.es [Transport Research Centre (TRANSyT-UPM) Universidad Politécnica de Madrid, ETSI Caminos, Canales y Puertos, Prof. Aranguren s/n, 28040 Madrid (Spain); Centro de investigación del transporte, TRANSyT-UPM, ETSI Caminos, Canales y Puertos, Universidad Politécnica de Madrid, Prof. Aranguren s/n, 28040 Madrid (Spain); Department of Construction and Rural Roads, Forestry Engineering School, Universidad Politécnica de Madrid, Ciudad Universitaria s/n, 28040 Madrid (Spain); and others

    2014-01-15

    The assessment of different alternatives in road-corridor planning must be based on a number of well-defined territorial variables that serve as decision making criteria, and this requires a high-quality preliminary environmental assessment study. In Spain the formal specifications for the technical requirements stipulate the constraints that must be considered in the early stages of defining road corridors, but not how they should be analyzed and ranked. As part of the feasibility study of a new road definition, the most common methodology is to establish different levels of Territorial Carrying Capacity (TCC) in the study area in order to summarize the territorial variables on thematic maps and to ease the tracing process of road-corridor layout alternatives. This paper explores the variables used in 22 road-construction projects conducted by the Ministry of Public Works that were subject to the Spanish EIA regulation and published between 2006 and 2008. The aim was to evaluate the quality of the methods applied and the homogeneity and suitability of the variables used for defining the TCC. The variables were clustered into physical, environmental, land-use and cultural constraints for the purpose of comparing the TCC values assigned in the studies reviewed. We found the average quality of the studies to be generally acceptable in terms of the justification of the methodology, the weighting and classification of the variables, and the creation of a synthesis map. Nevertheless, the methods for assessing the TCC are not sufficiently standardized; there is a lack of uniformity in the cartographic information sources and methodologies for the TCC valuation. -- Highlights: • We explore 22 road-corridor planning studies subjected to the Spanish EIA regulation. • We analyze the variables selected for defining territorial carrying capacity. • The quality of the studies is acceptable (methodology, variable weighting, mapping). • There is heterogeneity in the

  6. Factors for implementation of development projects with an emphasis on preliminary estimates project (Case Study flagship project of Ilam

    Directory of Open Access Journals (Sweden)

    Abdollahian Vahed

    2016-12-01

    Full Text Available Without a doubt optimum performance is possible in the context of a planned development project organized failure to comply with a standard patterndoes not guarantee when a project based on financial forecasts and with the required quality. in this study, based on the standards of project management enumerating the factors for implementation of a project the study is the flagship project of Ilam and finally the implementation of the project as stated in the standard are investigated. in this research project emphasizing the preliminary estimates (estimates and time and workload has been considered and compared to the existing. according to the research findings in 83 percent of projects, project was not according to preliminary financial estimates. 100% of projects have been wrong to predict the time and projects have progressed according to preliminary forecast and in 66 percent of projects supporting private sector investment and hinder the progress of the project is appropriate and the project framework was unchanged.

  7. PRELIMINARY RESULTS OF ESTIMATING SOIL MOISTURE OVER BARE SOIL USING FULL-POLARIMETRIC ALOS-2 DATA

    Directory of Open Access Journals (Sweden)

    A. Sekertekin

    2016-10-01

    Full Text Available Synthetic Aperture Radar (SAR imaging system is one of the most effective way for Earth observation. The aim of this study is to present the preliminary results about estimating soil moisture using L-band Synthetic Aperture Radar (SAR data. Full-polarimetric (HH, HV, VV, VH ALOS-2 data, acquired on 22.04.2016 with the incidence angle of 30.4o, were used in the study. Simultaneously with the SAR acquisition, in-situ soil moisture samples over bare agricultural lands were collected and evaluated using gravimetric method. Backscattering coefficients for all polarizations were obtained and linear regression analysis was carried out with in situ moisture measurements. The best correlation coefficient was observed with VV polarization. Cross-polarized backscattering coefficients were not so sensitive to soil moisture content. In the study, it was observed that soil moisture maps can be retrieved with the accuracy about 14% (RMSE.

  8. Developing guidelines for economic evaluation of environmental impacts in EIAs. Part I

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    Is the time right to introduce environmental evaluation into the Environmental Impact Assessment (EIA) system for large construction projects in China? The report analyses gaps to introducing environmental evaluation into EIAs and recommend how to bridge the gaps. The report also provides suggestions to the State Environmental Protection Administration on core elements of a guideline for environmental evaluation to include in the existing EIA guidelines. The report draws on international and Chinese research and best practice and conducts four case studies of environmental evaluation based on EIAs of investment projects e.g. a power plant, a waste water treatment plant, regional waste water irrigation, and a road construction project.

  9. FN-curves: preliminary estimation of severe accident risks after Fukushima

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Vanderley de; Soares, Wellington Antonio; Costa, Antonio Carlos Lopes da, E-mail: vasconv@cdtn.br, E-mail: soaresw@cdtn.br, E-mail: aclc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    Doubts of whether the risks related to severe accidents in nuclear reactors are indeed very low were raised after the nuclear accident at Fukushima Daiichi in 2011. Risk estimations of severe accidents in nuclear power plants involve both probability and consequence assessment of such events. Among the ways to display risks, risk curves are tools that express the frequency of exceeding a certain magnitude of consequence. Societal risk is often represented graphically in a FN-curve, a type of risk curve, which displays the probability of having N or more fatalities per year, as a function of N, on a double logarithmic scale. The FN-curve, originally introduced for the assessment of the risks in the nuclear industry through the U.S.NRC Reactor Safety Study WASH-1400 (1975), is used in various countries to express and limit risks of hazardous activities. This first study estimated an expected rate of core damage equal to 5x10{sup -5} by reactor-year and suggested an upper bound of 3x10{sup -4} by reactor-year. A more recent report issued by Electric Power Research Institute - EPRI (2008) estimates a figure of the order of 2x10{sup -5} by reactor-year. The Fukushima nuclear accident apparently implies that the observed core damage frequency is higher than that predicted by these probabilistic safety assessments. Therefore, this paper presents a preliminary analyses of the FN-curves related to severe nuclear reactor accidents, taking into account a combination of available data of past accidents, probability modelling to estimate frequencies, and expert judgments. (author)

  10. EIA's approach to information quality

    Energy Technology Data Exchange (ETDEWEB)

    Freedman, S.R. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    EIA has evolved a unique approach to improving information quality in a decentralized statistical agency. The idea is to give the program offices full line responsibility for the quality of their products, but to rely on a quality assurance group to oversee their efforts. The quality assurance group assures that these efforts are effective through a systematic process of data and model evaluation, applied research to address technical problems, and administrative procedures and standards to promote improved practice. Together the program offices and the quality assurance group keep the agency's leadership fully appriased of quality concerns and actively involved in solving quality problems. After reviewing the overall approach, this article describes the kinds of evaluations that are done and the mix of administrative procedures and standards used to accomplish changes. The article concludes with a discussion of the kinds of problems that are amenable to this approach.

  11. EIA directory of electronic products. Second quarter 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-04

    The Energy Information Administration (EIA) makes available for public use a series of machine-readable data files and computer models. They are available to the public on magnetic tapes; selected data files/models are available on diskette for IBM-compatible personal computers. This directory first presents the on-line files and compact discs. This is followed by descriptions and technical contacts and ordering and other information on the data files and models. An index by energy source is included. Additional ordering information is in the preface. The data files cover petroleum, natural gas, electricity, coal, integrated statistics, and consumption; the models cover petroleum, natural gas, electricity, coal, nuclear, and multifuel.

  12. Estimation of desmosponge (Porifera, Demospongiae) larval settlement rates from short-term recruitment rates: Preliminary experiments

    Science.gov (United States)

    Zea, Sven

    1992-09-01

    During a study of the spatial and temporal patterns of desmosponge (Porifera, Demospongiae) recruitment on rocky and coral reef habitats of Santa Marta, Colombian Caribbean Sea, preliminary attempts were made to estimate actual settlement rates from short-term (1 to a few days) recruitment censuses. Short-term recruitment rates on black, acrylic plastic plates attached to open, non-cryptic substratum by anchor screws were low and variable (0 5 recruits/plate in 1 2 days, sets of n=5 10 plates), but reflected the depth and seasonal trends found using mid-term (1 to a few months) censusing intervals. Moreover, mortality of recruits during 1 2 day intervals was low (0 12%). Thus, short-term censusing intervals can be used to estimate actual settlement rates. To be able to make statistical comparisons, however, it is necessary to increase the number of recruits per census by pooling data of n plates per set, and to have more than one set per site or treatment.

  13. Preliminary investigation of an ultrasound method for estimating pressure changes in deep-positioned vessels

    Science.gov (United States)

    Olesen, Jacob Bjerring; Villagomez-Hoyos, Carlos Armando; Traberg, Marie Sand; Chee, Adrian J. Y.; Yiu, Billy Y. S.; Ho, Chung Kit; Yu, Alfred C. H.; Jensen, Jørgen Arendt

    2016-04-01

    This paper presents a method for measuring pressure changes in deep-tissue vessels using vector velocity ultrasound data. The large penetration depth is ensured by acquiring data using a low frequency phased array transducer. Vascular pressure changes are then calculated from 2-D angle-independent vector velocity fields using a model based on the Navier-Stokes equations. Experimental scans are performed on a fabricated flow phantom having a constriction of 36% at a depth of 100 mm. Scans are carried out using a phased array transducer connected to the experimental scanner, SARUS. 2-D fields of angle-independent vector velocities are acquired using directional synthetic aperture vector flow imaging. The obtained results are evaluated by comparison to a 3-D numerical simulation model with equivalent geometry as the designed phantom. The study showed pressure drops across the constricted phantom varying from -40 Pa to 15 Pa with a standard deviation of 32%, and a bias of 25% found relative to the peak simulated pressure drop. This preliminary study shows that pressure can be estimated non-invasively to a depth that enables cardiac scans, and thereby, the possibility of detecting the pressure drops across the mitral valve.

  14. Environmental impact assessment (EIA): an overlooked instrument for sustainable development in Pakistan.

    Science.gov (United States)

    Saeed, Rashid; Sattar, Ayesha; Iqbal, Zafar; Imran, Muhammad; Nadeem, Raziya

    2012-04-01

    Environmental impact assessment (EIA) is a policy tool used for evaluating a project proposal from physical and socioeconomic environmental perspectives. Its aim is to reduce the impact of development on environment, hence, ensuring environmental sustainability. It is mandatory to submit an Environmental Impact Statement before starting a mega project as required by Environmental Protection Act of 1997 and Environmental Policy of Pakistan. Public consultation plays a key role in an EIA system, identifying the likely aspects and impacts of a development activity. This aspect has been ignored in effective enactment of environmental legislation in Pakistan. Sufficient legislative instruments are there to support EIA system in the country but the agencies responsible for the enforcement of environmental regulations have failed to do so. The current research gives an insight into the actual status of EIA system in Pakistan along with the feedback of EIA specialists and university teachers of the concerned departments. A new index has been devised on the basis of questionnaire response to work out the overall performance of EIA system in Pakistan or any other country. The weaknesses and deficiencies of each EIA stage have been worked out for Pakistan and elaborated with the help of the controversial Zero point Interchange Project in the capital city of Pakistan.

  15. The influence of actor capacities on EIA system performance in low and middle income countries -Cases from Georgia and Ghana

    NARCIS (Netherlands)

    Kolhoff, Arend J.; Runhaar, Hens A C|info:eu-repo/dai/nl/141942673; Gugushvili, Tamar; Sonderegger, Gabi; Van der Leest, Bart; Driessen, Peter|info:eu-repo/dai/nl/069081417

    2016-01-01

    In this paper, we aim to better understand the factors that contribute to the substantive performance of EIA systems in low and middle income countries. Substantive performance is defined as the extent to which the EIA process contributes to the EIA objectives for the long term, namely environmental

  16. Estimating landslide losses - preliminary results of a seven-State pilot project

    Science.gov (United States)

    Highland, Lynn M.

    2006-01-01

    reliable information on economic losses associated with landslides. Each State survey examined the availability, distribution, and inherent uncertainties of economic loss data in their study areas. Their results provide the basis for identifying the most fruitful methods of collecting landslide loss data nationally, using methods that are consistent and provide common goals. These results can enhance and establish the future directions of scientific investigation priorities by convincingly documenting landslide risks and consequences that are universal throughout the 50 States. This report is organized as follows: A general summary of the pilot project history, goals, and preliminary conclusions from the Lincoln, Neb. workshop are presented first. Internet links are then provided for each State report, which appear on the internet in PDF format and which have been placed at the end of this open-file report. A reference section follows the reports, and, lastly, an Appendix of categories of landslide loss and sources of loss information is included for the reader's information. Please note: The Oregon Geological Survey has also submitted a preliminary report on indirect loss estimation methodology, which is also linked with the others. Each State report is unique and presented in the form in which it was submitted, having been independently peer reviewed by each respective State survey. As such, no universal 'style' or format has been adopted as there have been no decisions on which inventory methods will be recommended to the 50 states, as of this writing. The reports are presented here as information for decision makers, and for the record; although several reports provide recommendations on inventory methods that could be adopted nationwide, currently no decisions have been made on adopting a uniform methodology for the States.

  17. Application of EIA/SEA system in land use planning: Experience from Serbia

    Directory of Open Access Journals (Sweden)

    Stojanović Božidar

    2005-01-01

    Full Text Available This paper discusses the experience and current status of EIA/SEA procedures and assessment methodologies in Serbia, aiming to propose strategies that can lead to effective integration of the SEA in spatial planning. Institutional and practical problems with regard to the regulations of EIA/SEA were considered. Experience from the past decade shows that implementation of EIA system in Serbia has not been effective as expected. New legislation on EIA and SEA is harmonized with corresponding EU Directives. First steps in the application of the SEA show that the main issues are screening, scooping and decision making. According to the research results, it is suggested that extra evaluation processes should be incorporated into current assessment procedures to improve their scientific validity and integrity.

  18. Temporal change of EIA asymmetry revealed by a beacon receiver network in Southeast Asia

    Science.gov (United States)

    Watthanasangmechai, Kornyanat; Yamamoto, Mamoru; Saito, Akinori; Maruyama, Takashi; Yokoyama, Tatsuhiro; Nishioka, Michi; Ishii, Mamoru

    2015-05-01

    To reveal the temporal change of the equatorial ionization anomaly (EIA) asymmetry, a multipoint satellite-ground beacon experiment was conducted along the meridional plane of the Thailand-Indonesia sector. The observation includes one station near the magnetic equator and four stations at off-equator latitudes. This is the first EIA asymmetry study with high spatial resolution using GNU Radio Beacon Receiver (GRBR) observations in Southeast Asia. GRBR-total electron contents (TECs) from 97 polar-orbit satellite passes in March 2012 were analyzed in this study. Successive passes captured rapid evolution of EIA asymmetry, especially during geomagnetic disturbances. The penetrating electric fields that occur during geomagnetic disturbed days are not the cause of the asymmetry. Instead, high background TEC associated with an intense electric field empowers the neutral wind to produce severe asymmetry of the EIA. Such rapid evolution of EIA asymmetry was not seen during nighttime, when meridional wind mainly controlled the asymmetric structures. Additional data are necessary to identify the source of the variations, i.e., atmospheric waves. Precisely capturing the locations of the crests and the evolution of the asymmetry enhances understanding of the temporal change of EIA asymmetry at the local scale and leads to a future local modeling for TEC prediction in Southeast Asia.

  19. Enhanced Mean Dynamic Topography And Ocean Circulation Estimation Using Goce Preliminary Mode

    DEFF Research Database (Denmark)

    Knudsen, Per; Bingham, Rory; Andersen, Ole Baltazar;

    2011-01-01

    The Gravity and Ocean Circulation Experiment - GOCE satellite mission measure the Earth gravity field with unprecedented accuracy leading to substantial improvements in the modelling of the ocean circulation and transport. In this study of the performance of GOCE, the new preliminary gravity mode...

  20. Development, evaluation, and laboratory validation of immunoassays for the diagnosis of equine infectious anemia (EIA) using recombinant protein produced from a synthetic p26 gene of EIA virus.

    Science.gov (United States)

    Singha, Harisankar; Goyal, Sachin K; Malik, Praveen; Khurana, Sandip K; Singh, Raj K

    2013-12-01

    Equine infectious anemia (EIA)-a retroviral disease caused by equine infectious anemia virus (EIAV)-is a chronic, debilitating disease of horses, mules, and donkeys. EIAV infection has been reported worldwide and is recognized as pathogen of significant economic importance to the horse industry. This disease falls under regulatory control program in many countries including India. Control of EIA is based on identification of inapparent carriers by detection of antibodies to EIAV in serologic tests and "Stamping Out" policy. The current internationally accepted test for diagnosis of EIA is the agar gel immune-diffusion test (AGID), which detects antibodies to the major gag gene (p26) product. The objective of this study was to develop recombinant p26 based in-house immunoassays [enzyme linked immunosorbent assays (ELISA), and AGID] for EIA diagnosis. The synthetic p26 gene of EIAV was expressed in Escherichia coli and diagnostic potential of recombinant p26 protein were evaluated in ELISA and AGID on 7,150 and 1,200 equine serum samples, respectively, and compared with commercial standard AGID kit. The relative sensitivity and specificity of the newly developed ELISA were 100 and 98.6 %, respectively. Whereas, relative sensitivity and specificity of the newly developed AGID were in complete agreement in respect to commercial AGID kit. Here, we have reported the validation of an ELISA and AGID on large number of equine serum samples using recombinant p26 protein produced from synthetic gene which does not require handling of pathogenic EIAV. Since the indigenously developed reagents would be economical than commercial diagnostic kit, the rp26 based-immunoassays could be adopted for the sero-diagnosis and control of EIA in India.

  1. Preliminary experiments to estimate the PE.MA.M (PElagic MArine Mesocosm) offshore behaviour

    Science.gov (United States)

    Albani, Marta; Piermattei, Viviana; Stefanì, Chiara; Marcelli, Marco

    2016-04-01

    The phytoplankton community is controlled not only by local environmental conditions but also by physical processes occurring on different temporal and spatial scales. Hydrodynamic local conditions play an important role in marine ecosystems. Several studies have shown that hydrodynamic conditions can influence the phytoplankton settling velocity, vertical and horizontal distribution and formation of cyanobacterial blooms. Mesocosms are useful structures to simulate marine environment at mesoscale resolution; allowing to closely approximate biotic or abiotic parameters of interest directly in nature. In this work an innovative structure named PE.MA.M (PElagic MArine Mesocosm) is presented and tested. Laboratory experiments have been conducted in order to observe seasonal variations of biomass behaviour in two different hydrodynamic conditions: outside as well as whithin the PE.MA.M. We have evaluated whether it is possible to isolate a natural system from external water mass hydrodynamic exchanges and to assume that phytoplankton cells' transition is limited at the net and sea interface. Preliminary experiments test the isolating capacity of the net, to determine the currents' attenuation rate and to estimate the possible PE.MA.M. offshore behaviour. In the first investigation, we monitored the diffusion of phytoplankton cells. The PE.MA.M. exterior and interior were simulated using a plexiglass tank divided into two half-tanks (Aout-Bin) by a septum consisting of a net like a PE.MA.M. The tank was filled up with 10 L of water and only the half-tank Aout was filled up with 10 ml of phytoplankton culture (Clorella sp.). We monitored the chlorophyll concentrations for 24 hours. The two tanks had similar concentrations after 4 hours (2.70322 mg/m³ Aout and 2.37245 mg/m3 Bin) and this constant relationship was maintened until the end of the test. In the second investigation we used clod cards to measure water motions.We conducted two experiments within tank, the first

  2. State energy data report 1993: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public; and (2) to provide the historical series necessary for EIA`s energy models.

  3. State Energy Data Report, 1991: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sector. The estimates are developed in the State Energy Data System (SEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining SEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. SEDS exists for two principal reasons: (1) to provide State energy consumption estimates to the Government, policy makers, and the public; and (2) to provide the historical series necessary for EIA`s energy models.

  4. Recalibration of the limiting antigen avidity EIA to determine mean duration of recent infection in divergent HIV-1 subtypes.

    Directory of Open Access Journals (Sweden)

    Yen T Duong

    Full Text Available Mean duration of recent infection (MDRI and misclassification of long-term HIV-1 infections, as proportion false recent (PFR, are critical parameters for laboratory-based assays for estimating HIV-1 incidence. Recent review of the data by us and others indicated that MDRI of LAg-Avidity EIA estimated previously required recalibration. We present here results of recalibration efforts using >250 seroconversion panels and multiple statistical methods to ensure accuracy and consensus.A total of 2737 longitudinal specimens collected from 259 seroconverting individuals infected with diverse HIV-1 subtypes were tested with the LAg-Avidity EIA as previously described. Data were analyzed for determination of MDRI at ODn cutoffs of 1.0 to 2.0 using 7 statistical approaches and sub-analyzed by HIV-1 subtypes. In addition, 3740 specimens from individuals with infection >1 year, including 488 from patients with AIDS, were tested for PFR at varying cutoffs.Using different statistical methods, MDRI values ranged from 88-94 days at cutoff ODn = 1.0 to 177-183 days at ODn = 2.0. The MDRI values were similar by different methods suggesting coherence of different approaches. Testing for misclassification among long-term infections indicated that overall PFRs were 0.6% to 2.5% at increasing cutoffs of 1.0 to 2.0, respectively. Balancing the need for a longer MDRI and smaller PFR (<2.0% suggests that a cutoff ODn = 1.5, corresponding to an MDRI of 130 days should be used for cross-sectional application. The MDRI varied among subtypes from 109 days (subtype A&D to 152 days (subtype C.Based on the new data and revised analysis, we recommend an ODn cutoff = 1.5 to classify recent and long-term infections, corresponding to an MDRI of 130 days (118-142. Determination of revised parameters for estimation of HIV-1 incidence should facilitate application of the LAg-Avidity EIA for worldwide use.

  5. Effective use of environmental impact assessments (EIAs) for geothermal development projects

    Energy Technology Data Exchange (ETDEWEB)

    Goff, S.J.

    2000-05-28

    Both the developed and developing nations of the world would like to move toward a position of sustainable development while paying attention to the restoration of natural resources, improving the environment, and improving the quality of life. The impacts of geothermal development projects are generally positive. It is important, however, that the environmental issues associated with development be addressed in a systematic fashion. Drafted early in the project planning stage, a well-prepared Environmental Impact Assessment (EIA) can significantly add to the quality of the overall project. An EIA customarily ends with the decision to proceed with the project. The environmental analysis process could be more effective if regular monitoring, detailed in the EIA, continues during project implementation. Geothermal development EIAs should be analytic rather than encyclopedic, emphasizing the impacts most closely associated with energy sector development. Air quality, water resources and quality, geologic factors, and socioeconomic issues will invariably be the most important factors. The purpose of an EIA should not be to generate paperwork, but to enable superb response. The EIA should be intended to help public officials make decisions that are based on an understanding of environmental consequences and take proper actions. The EIA process has been defined in different ways throughout the world. In fact, it appears that no two countries have defined it in exactly the same way. Going hand in hand with the different approaches to the process is the wide variety of formats available. It is recommended that the world geothermal community work towards the adoption of a standard. The Latin American Energy Organization (OLADE) and the Inter-American Development Bank (IDB)(OLADE, 1993) prepared a guide that presents a comprehensive discussion of the environmental impacts and suggested mitigation alternatives associated with geothermal development projects. The OLADE guide

  6. Bidimensional Data Allow for Better Age Estimation on Immature Specimens than Unidimensional Data: A Preliminary Study on the Ilium.

    Science.gov (United States)

    Daumas, Mathilde; Chaumoître, Kathia; Adalian, Pascal; Marchal, François

    2016-03-01

    Most biometric age estimation methods used in anthropological and forensic science for juveniles are based on unidimensional measurements (length or width). Here, a new method using bidimensional data was tested. A 3D morphometric analysis was performed on 108 CT scans of ilium bone of juveniles (from 20 gestational weeks to 12 years old). The sample was divided into training and validation groups. Best predictors were determined by comparing the efficiency of each variable (length, width, area, and module: a product of length and width). We established linear and polynomial regressions for each parameter for both sides. Applying the equations to the validation sample showed no significant difference between real and predicted ages. For age estimation, the area and module parameters yielded better results than unidimensional measurements. The results from this preliminary study were highly conclusive, and it would be interesting to extend the work, covering larger samples, and other bones.

  7. The scientific activities of CERN and budget estimates for the years 2003-2010 - Preliminary orientations

    CERN Document Server

    2002-01-01

    This paper presents preliminary orientations for the Long-Term Plan 2003-2010. It focuses on choices in the scientific programme, savings, organisational measures and financial scenarios to deal with the cost increase of the LHC project. The paper is presented for discussion. The outcome of this discussion, as well as the observations and recommendations of the External Review Committee, which started its work while this paper was in preparation, will be taken into account for the plan which the Management is preparing for June 2002.

  8. The scientific activities of CERN and budget estimates for the years 2003-2010 - preliminary orientations

    CERN Document Server

    2002-01-01

    This paper presents preliminary orientations for the Long-Term Plan 2003-2010. It focuses on choices in the scientific programme, savings, organisational measures and financial scenarios to deal with the cost increase of the LHC project. The paper is presented for discussion. The outcome of this discussion, as well as the observations and recommendations of the External Review Committee, which started its work while this paper was in preparation, will be taken into account for the plan which the Management is preparing for June 2002.

  9. Estimation on the First Cycle of the Annual Forest Inventory System: Methods, Preliminary Results, and Observations

    Science.gov (United States)

    Mark H. Hansen; Gary J. Brand; Daniel G. Wendt; Ronald E. McRoberts

    2001-01-01

    The first year of annual FIA data collection in the North Central region was completed for 1999 in Indiana, Iowa, Minnesota, and Missouri. Estimates of timberland area, total growing-stock volume and growing-stock volume per acre are presented. These estimates are based on data from 1 year, collected at the base Federal inventory intensity, a lower intensity sample...

  10. The evolution of EIA from projects to policy to sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Sigal, L.L.

    1993-05-01

    This paper explores the relationship of the environmental impact assessment (EIA) process and its potential for evaluating the impacts of proposed actions on environmental sustainability. Sustainable development was described by the World Commission on Environment and Development (1987) as `` . . . development that meets the needs of the present generation without compromising the ability of future generations to meet their own needs.`` It is broadly defined as an approach to development that integrates social and economic goals and values with sound ecological management. I believe, along with many others (Jacobs and Sadler 1990), that the EIA process provides a vehicle for understanding and achieving environmental sustainability through enlightened decisionmaking.

  11. Quality of Cultural Heritage in EIA; twenty years of experience in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Lindblom, Inge, E-mail: inge.lindblom@niku.no

    2012-04-15

    The aim of this paper is to clarify and discuss how quality, relevance, attitudes, beliefs and transfer value act as underlying driving forces in the development of the Cultural Heritage theme in EIAs. One purpose is to identify and discuss some conditions that can better environmental assessment in order to increase the significance of EIA in decision-making with regard to Cultural Heritage. The main tools used are different research methods designed for analyses of quality and quality changes, primarily based on the relevant opinions of 160 people occupied with Cultural Heritage in EIA in Norway. The study is based on a review of 40 types of EIAs from 1991 to 2000, an online questionnaire to 319 (160 responded) individuals from 14 different backgrounds, and interviews with three institutions in Sweden and Denmark. The study confirms a steadily increasing quality on EIRs over time, parallel with an improvement of the way in which Cultural Heritage is treated in EIA. This is supported by both the interviews and the qualitative comments regarding the survey. Potential for improvements is shown to be a need for more detailed background material as well as more use of adequate methods. The survey shows the existence of a wide variety of negative views, attitudes and beliefs, but the consequences of this are difficult to evaluate. However, most certainly, negative attitudes and beliefs have not been powerful enough to be detrimental to the quality of Cultural Heritage component, as nothing in the study indicates that negative attitudes and myths are undermining the system of EIA. The study shows the importance of having on-going discussions on quality and quality change over time by people involved in EIA, and how this is a necessary condition for successful implementation and acceptance. Beliefs and negative attitudes can also be a catalyst for developing better practice and advancing new methodology. In addition, new EIA countries must be prepared for several years

  12. Subject-specific estimation of central aortic blood pressure via system identification: preliminary in-human experimental study.

    Science.gov (United States)

    Fazeli, Nima; Kim, Chang-Sei; Rashedi, Mohammad; Chappell, Alyssa; Wang, Shaohua; MacArthur, Roderick; McMurtry, M Sean; Finegan, Barry; Hahn, Jin-Oh

    2014-10-01

    This paper demonstrates preliminary in-human validity of a novel subject-specific approach to estimation of central aortic blood pressure (CABP) from peripheral circulatory waveforms. In this "Individualized Transfer Function" (ITF) approach, CABP is estimated in two steps. First, the circulatory dynamics of the cardiovascular system are determined via model-based system identification, in which an arterial tree model is characterized based on the circulatory waveform signals measured at the body's extremity locations. Second, CABP waveform is estimated by de-convolving peripheral circulatory waveforms from the arterial tree model. The validity of the ITF approach was demonstrated using experimental data collected from 13 cardiac surgery patients. Compared with the invasive peripheral blood pressure (BP) measurements, the ITF approach yielded significant reduction in errors associated with the estimation of CABP, including 1.9-2.6 mmHg (34-42 %) reduction in BP waveform errors (p < 0.05) as well as 5.8-9.1 mmHg (67-76 %) and 6.0-9.7 mmHg (78-85 %) reductions in systolic and pulse pressure (SP and PP) errors (p < 0.05). It also showed modest but significant improvement over the generalized transfer function approach, including 0.1 mmHg (2.6 %) reduction in BP waveform errors as well as 0.7 (20 %) and 5.0 mmHg (75 %) reductions in SP and PP errors (p < 0.05).

  13. Application of Boosting Regression Trees to Preliminary Cost Estimation in Building Construction Projects

    OpenAIRE

    Yoonseok Shin

    2015-01-01

    Among the recent data mining techniques available, the boosting approach has attracted a great deal of attention because of its effective learning algorithm and strong boundaries in terms of its generalization performance. However, the boosting approach has yet to be used in regression problems within the construction domain, including cost estimations, but has been actively utilized in other domains. Therefore, a boosting regression tree (BRT) is applied to cost estimations at the early stag...

  14. Enhanced Mean Dynamic Topography And Ocean Circulation Estimation Using Goce Preliminary Mode

    DEFF Research Database (Denmark)

    Knudsen, Per; Bingham, Rory; Andersen, Ole Baltazar

    2011-01-01

    The Gravity and Ocean Circulation Experiment - GOCE satellite mission measure the Earth gravity field with unprecedented accuracy leading to substantial improvements in the modelling of the ocean circulation and transport. In this study of the performance of GOCE, the new preliminary gravity models...... have been combined with the recent DNSC08MSS mean sea surface model to construct a global GOCE satellite-only mean dynamic topography model. At a first glance, the GOCE MDT display the well known features related to the major ocean current systems. A closer look, however, reveals that the improved...... gravity provided by the GOCE mission has enhanced the resolution and sharpened the boundary of those features. A computation of MDT slopes clearly displays the improvements in the description of the current systems. In the North Atlantic Ocean, the Gulf Stream is very well defined and the Labrador...

  15. Consideration of climate change impacts and adaptation in EIA practice — Perspectives of actors in Austria and Germany

    Energy Technology Data Exchange (ETDEWEB)

    Jiricka, Alexandra, E-mail: alexandra.jiricka@boku.ac.at [University of Natural Resources and Applied Life Sciences, Vienna (Austria); Department of Landscape, Spatial and Infrastructure Sciences, Institute for Landscape Development, Recreation and Conservation Planning, Peter-Jordan-Straße 82, 1190 Vienna (Austria); Formayer, Herbert; Schmidt, Anna [University of Natural Resources and Applied Life Sciences, Vienna (Austria); Department of Landscape, Spatial and Infrastructure Sciences, Institute for Landscape Development, Recreation and Conservation Planning, Peter-Jordan-Straße 82, 1190 Vienna (Austria); Völler, Sonja; Leitner, Markus [Environment Agency Austria, Environmental Impact Assessment and Climate Change, Spittelauer Lände 5, 1090 Wien (Austria); Fischer, Thomas B. [Environmental Assessment and Management, School of Environmental Sciences, University of Liverpool, 74 Bedford Street South, Liverpool L69 7ZQ (United Kingdom); Wachter, Thomas F. [Büro für Umweltplanung Dr. Wachter, Wiesnerring 2c, Hamburg (Germany)

    2016-02-15

    Current political discussions and developments indicate the importance and urgency of incorporating climate change considerations into EIA processes. The recent revision of the EU Directive 2014/52/EU on Environmental Impact Assessment (EIA) requires changes in the EIA practice of the EU member states. This paper investigates the extent to which the Environmental Impact Assessment (EIA) can contribute to an early consideration of climate change consequences in planning processes. In particular the roles of different actors in order to incorporate climate change impacts and adaptation into project planning subject to EIA at the appropriate levels are a core topic. Semi-structured expert interviews were carried out with representatives of the main infrastructure companies and institutions responsible in these sectors in Austria, which have to carry out EIA regularly. In a second step expert interviews were conducted with EIA assessors and EIA authorities in Austria and Germany, in order to examine the extent to which climate-based changes are already considered in EIA processes. This paper aims to discuss the different perspectives in the current EIA practice with regard to integrating climate change impacts as well as barriers and solutions identified by the groups of actors involved, namely project developers, environmental competent authorities and consultants (EIA assessors/practitioners). The interviews show that different groups of actors consider the topic to different degrees. Downscaling of climate change scenarios is in this context both, a critical issue with regards to availability of data and costs. Furthermore, assistance for the interpretation of relevant impacts, to be deducted from climate change scenarios, on the specific environmental issues in the area is needed. The main barriers identified by the EIA experts therefore include a lack of data as well as general uncertainty as to how far climate change should be considered in the process without

  16. Preliminary estimate of the manufacturing cost for lithium/metal sulfide cells for stationary and mobile applications

    Energy Technology Data Exchange (ETDEWEB)

    Chilenskas, A. A.; Schaefer, J. C.; Towle, W. L.; Barney, D. L.

    1980-01-01

    A preliminary estimate has been made of the manufacturing cost for lithium/iron sulfide cells for stationary energy-storage and electric-vehicle applications. This preliminary cost analysis indicated that the manufacturing cost (in 1979 dollars) is $24 to 41/kW-h for stationary energy-storage cells and $31 to 55/kW-h for electric-vehicle cells. The materials cost was found to contribute between 52 and 65% of this manufacturing cost. The most expensive materials and components were lithium (metal and compounds), $4.61 to $14.26/kW-h; BN felt, $4.00 to 8.50/kW-h; feed-through components, $2.40/kW-h; positive current collectors, $1.48 to 2.20/kW-h; and aluminum, $1.43 to 1.66/kW-h. The projected lithium requirements were determined for use in lithium/iron sulfide batteries and conventional uses to the year 2006. The results showed that the lithium requirements were about 275,000 short tons by 2006, which is equivalent to about 51% of presently known US resources. Of this amount, about 33% would be used in battery production and 67% consumed in conventional uses. It is expected that the lithium used in battery production would be recycled.

  17. Tailoring of EIA-649-1: Definition of Major (Class I) Engineering Change Proposal

    Science.gov (United States)

    2015-05-15

    MISSILE SYSTEMS CENTER TAILORING TAILORING OF EIA-649-1: DEFINITION OF MAJOR (CLASS I) ENGINEERING CHANGE PROPOSAL APPROVED FOR...specified and approved requirements including safety, reliability supportability and quantitative requirements that result in product attributes that...delivered products (e.g., by product recall, modification kit installation, attrition, replacement during maintenance using modified spares ). 7

  18. 75 FR 43823 - Safety Zone; He'eia Kea Small Boat Harbor, Kaneohe Bay, Oahu, HI

    Science.gov (United States)

    2010-07-27

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 RIN 1625-AA00 Safety Zone; He'eia Kea Small Boat Harbor, Kaneohe Bay, Oahu, HI AGENCY: Coast Guard, DHS. ACTION: Temporary Final Rule. SUMMARY: The Coast Guard...

  19. An experiential approach to improving the integration of knowledge during EIA in transport planning

    Energy Technology Data Exchange (ETDEWEB)

    Soria-Lara, Julio A., E-mail: julio.soria-lara@ouce.ox.ac.uk [Transport Research Unit, School of Geography and the Environment, University of Oxford, South Parks Road, Oxford OX1 3QY (United Kingdom); Bertolini, Luca, E-mail: l.bertolini@uva.nl [Centre for Urban Studies, University of Amsterdam, Nieuwe Achtergracht 166 1018 WV Amsterdam (Netherlands); Brömmelstroet, Marco te, E-mail: M.C.G.teBrommelstroet@uva.nl [Centre for Urban Studies, University of Amsterdam, Nieuwe Achtergracht 166 1018 WV Amsterdam (Netherlands)

    2016-01-15

    The integration of knowledge from stakeholders and the public at large is seen as one of the biggest process-related barriers during the scoping phase of EIA application in transport planning. While the academic literature offers abundant analyses, discussions and suggestions how to overcome this problem, the proposed solutions are yet to be adequately tested in practice. In order to address this gap, we test the effectiveness of a set of interventions and trigger mechanisms for improving different aspects of knowledge integration. The interventions are tested in an experiential study with two sequential cases, representing “close-to-real-life” conditions, in the context of two cities in Andalusia, Spain. In general terms, the participants perceived that the integration of knowledge improved during the simulation of the EIA scoping phase. Certain shortcomings were also discussed, fundamentally related to how the time spent during the scoping phase was crucial to lead an effective learning process between the involved people. The study concludes with a reflection on the effectiveness of the tested interventions according to similarities and differences obtained from the two experiential case studies, as well as with a discussion of the potential to generate new knowledge through the use of experiential studies in EIA practice. - Highlights: • It tests a set of interventions and mechanisms to improve the integration of knowledge. • The scoping phase of EIA is simulated to assess the effectiveness of interventions. • Two sequential case studies are used.

  20. Screening for EIA in India: enhancing effectiveness through ecological carrying capacity approach.

    Science.gov (United States)

    Rajaram, T; Das, Ashutosh

    2011-01-01

    Developing countries across the world have embraced the policy of high economic growth as a means to reduce poverty. This economic growth largely based on industrial output is fast degrading the ecosystems, jeopardizing their long term sustainability. Environmental Impact Assessment (EIA) has long been recognized as a tool which can help in protecting the ecosystems and aid sustainable development. The Screening guidelines for EIA reflect the level of commitment the nation displays towards tightening its environmental protection system. The paper analyses the screening process for EIA in India and dissects the rationale behind the exclusions and thresholds set in the screening process. The screening process in India is compared with that of the European Union with the aim of understanding the extent of deviations from a screening approach in the context of better economic development. It is found that the Indian system excludes many activities from the purview of screening itself when compared to the EU. The constraints responsible for these exclusions are discussed and the shortcomings of the current command and control system of environmental management in India are also explained. It is suggested that an ecosystem carrying capacity based management system can provide significant inputs to enhance the effectiveness of EIA process from screening to monitoring.

  1. Preliminary Phytochemical screening of the Ethanolic extract of Dioscorea villosa Tubers and Estimation of Diosgenin by HPTLC Technique.

    Directory of Open Access Journals (Sweden)

    Anitha Roy

    2013-09-01

    Full Text Available In the present study, simple phytochemical screening procedures were carried out to find the various constituents present in the ethanolic extract of Dioscorea villosa tubers. Further,estimation of Diosgenin in Dioscorea villosa tubers, was carried out by HPTLC technique. The preliminary screening showed presence of proteins, flavonoids tannins, alkaloids, phenolic compounds saponins and glycosides. The extract was chromatographed on silica gel GF254 plates with Toluene: Ethyl Acetate: Acetic Acid: Formic Acid (4: 3: 1:1 as mobile phase. Detection and quantification were performed by densitrometric scanning, at 366 nm. The average recovery of diosgenin was found to be 0.48 %. The HPTLC technique has provided a good resolution of diosgenin from other constituents present in the ethanolic extract.

  2. Preliminary investigation of an ultrasound method for estimating pressure changes in deep-positioned vessels

    DEFF Research Database (Denmark)

    Olesen, Jacob Bjerring; Villagómez Hoyos, Carlos Armando; Traberg, Marie Sand

    2016-01-01

    varying from -40 Pa to 15 Pa with a standard deviation of 32%, and a bias of 25% found relative to the peak simulated pressure drop. This preliminary study shows that pressure can be estimated non-invasively to a depth that enables cardiac scans, and thereby, the possibility of detecting the pressure......This paper presents a method for measuring pressure changes in deep-tissue vessels using vector velocity ultrasound data. The large penetration depth is ensured by acquiring data using a low frequency phased array transducer. Vascular pressure changes are then calculated from 2-D angle...... of angle-independent vector velocities are acquired using directional synthetic aperture vector flow imaging. The obtained results are evaluated by comparison to a 3-D numerical simulation model with equivalent geometry as the designed phantom. The study showed pressure drops across the constricted phantom...

  3. Preliminary verification of instantaneous air temperature estimation for clear sky conditions based on SEBAL

    Science.gov (United States)

    Zhu, Shanyou; Zhou, Chuxuan; Zhang, Guixin; Zhang, Hailong; Hua, Junwei

    2017-02-01

    Spatially distributed near surface air temperature at the height of 2 m is an important input parameter for the land surface models. It is of great significance in both theoretical research and practical applications to retrieve instantaneous air temperature data from remote sensing observations. An approach based on Surface Energy Balance Algorithm for Land (SEBAL) to retrieve air temperature under clear sky conditions is presented. Taking the meteorological measurement data at one station as the reference and remotely sensed data as the model input, the research estimates the air temperature by using an iterative computation. The method was applied to the area of Jiangsu province for nine scenes by using MODIS data products, as well as part of Fujian province, China based on four scenes of Landsat 8 imagery. Comparing the air temperature estimated from the proposed method with that of the meteorological station measurement, results show that the root mean square error is 1.7 and 2.6 °C at 1000 and 30 m spatial resolution respectively. Sensitivity analysis of influencing factors reveals that land surface temperature is the most sensitive to the estimation precision. Research results indicate that the method has great potentiality to be used to estimate instantaneous air temperature distribution under clear sky conditions.

  4. Preconception care: preliminary estimates of costs and effects of smoking cessation and folic acid supplementation.

    NARCIS (Netherlands)

    Weerd, S. de; Polder, J.J.; Cohen-Overbeek, T.E.; Zimmermann, L.J.; Steegers, E.A.P.

    2004-01-01

    OBJECTIVE: To assess costs and effectiveness of preconception counseling for all women planning pregnancy in The Netherlands with regard to folic acid supplementation and smoking cessation counseling. STUDY DESIGN: Costs and effects were estimated based on 200,000 women approached yearly and uptake

  5. A preliminary estimate of geoid-induced variations in repeat orbit satellite altimeter observations

    Science.gov (United States)

    Brenner, Anita C.; Beckley, B. D.; Koblinsky, C. J.

    1990-01-01

    Altimeter satellites are often maintained in a repeating orbit to facilitate the separation of sea-height variations from the geoid. However, atmospheric drag and solar radiation pressure cause a satellite orbit to drift. For Geosat this drift causes the ground track to vary by + or - 1 km about the nominal repeat path. This misalignment leads to an error in the estimates of sea surface height variations because of the local slope in the geoid. This error has been estimated globally for the Geosat Exact Repeat Mission using a mean sea surface constructed from Geos 3 and Seasat altimeter data. Over most of the ocean the geoid gradient is small, and the repeat-track misalignment leads to errors of only 1 to 2 cm. However, in the vicinity of trenches, continental shelves, islands, and seamounts, errors can exceed 20 cm. The estimated error is compared with direct estimates from Geosat altimetry, and a strong correlation is found in the vicinity of the Tonga and Aleutian trenches. This correlation increases as the orbit error is reduced because of the increased signal-to-noise ratio.

  6. A preliminary estimate of geoid-induced variations in repeat orbit satellite altimeter observations

    Science.gov (United States)

    Brenner, Anita C.; Beckley, B. D.; Koblinsky, C. J.

    1990-01-01

    Altimeter satellites are often maintained in a repeating orbit to facilitate the separation of sea-height variations from the geoid. However, atmospheric drag and solar radiation pressure cause a satellite orbit to drift. For Geosat this drift causes the ground track to vary by + or - 1 km about the nominal repeat path. This misalignment leads to an error in the estimates of sea surface height variations because of the local slope in the geoid. This error has been estimated globally for the Geosat Exact Repeat Mission using a mean sea surface constructed from Geos 3 and Seasat altimeter data. Over most of the ocean the geoid gradient is small, and the repeat-track misalignment leads to errors of only 1 to 2 cm. However, in the vicinity of trenches, continental shelves, islands, and seamounts, errors can exceed 20 cm. The estimated error is compared with direct estimates from Geosat altimetry, and a strong correlation is found in the vicinity of the Tonga and Aleutian trenches. This correlation increases as the orbit error is reduced because of the increased signal-to-noise ratio.

  7. An elasto-plastic approach to estimate lifetime of notched components under variable amplitude fatigue loading: a preliminary investigation

    Directory of Open Access Journals (Sweden)

    N. Zuhair Faruq

    2016-07-01

    Full Text Available The present paper is concerned with the formulation of an elasto-plastic strain based approach suitable for assessing fatigue strength of notched components subjected to in-service variable amplitude cyclic loading. The hypothesis is formed that the crack initiation plane is closely aligned with the plane of maximum shear strain amplitude, its orientation and the associated stress/strain quantities being determined using the Maximum Variance Method. Fatigue damage is estimated by applying the Modified Manson-Coffin Curve Method (MMCCM along with the Point Method (PM. In the proposed approach, the required critical distance is treated as a material property whose value is not affected either by the sharpness of the notch being assessed or by the profile of the load spectrum being applied. The detrimental effect of non-zero mean stresses and degree of multiaxiality of the local stress/strain histories is also considered. The accuracy and reliability of the proposed design methodology was checked against several experimental data taken from the literature and generated under different uniaxial variable amplitude load histories. In order to determine the required local stress/strain states, refined elasto-plastic finite element models were solved using commercial software ANSYS®. This preliminary validation exercise allowed us to prove that the proposed approach is capable of estimates laying within an error factor of about 2. These preliminary results are certainly promising, strongly supporting the idea that the proposed design strategy can successfully be used to assess the fatigue lifetime of notched metallic components subjected to in-service multiaxial variable amplitude loading sequences.

  8. An empirical model of ionospheric total electron content (TEC near the crest of the equatorial ionization anomaly (EIA

    Directory of Open Access Journals (Sweden)

    Hajra Rajkumar

    2016-01-01

    Full Text Available We present a geomagnetic quiet time (Dst > −50 nT empirical model of ionospheric total electron content (TEC for the northern equatorial ionization anomaly (EIA crest over Calcutta, India. The model is based on the 1980–1990 TEC measurements from the geostationary Engineering Test Satellite-2 (ETS-2 at the Haringhata (University of Calcutta, India: 22.58° N, 88.38° E geographic; 12.09° N, 160.46° E geomagnetic ionospheric field station using the technique of Faraday rotation of plane polarized VHF (136.11 MHz signals. The ground station is situated virtually underneath the northern EIA crest. The monthly mean TEC increases linearly with F10.7 solar ionizing flux, with a significantly high correlation coefficient (r = 0.89–0.99 between the two. For the same solar flux level, the TEC values are found to be significantly different between the descending and ascending phases of the solar cycle. This ionospheric hysteresis effect depends on the local time as well as on the solar flux level. On an annual scale, TEC exhibits semiannual variations with maximum TEC values occurring during the two equinoxes and minimum at summer solstice. The semiannual variation is strongest during local noon with a summer-to-equinox variability of ~50–100 TEC units. The diurnal pattern of TEC is characterized by a pre-sunrise (0400–0500 LT minimum and near-noon (1300–1400 LT maximum. Equatorial electrodynamics is dominated by the equatorial electrojet which in turn controls the daytime TEC variation and its maximum. We combine these long-term analyses to develop an empirical model of monthly mean TEC. The model is validated using both ETS-2 measurements and recent GNSS measurements. It is found that the present model efficiently estimates the TEC values within a 1-σ range from the observed mean values.

  9. An empirical model of ionospheric total electron content (TEC) near the crest of the equatorial ionization anomaly (EIA)

    Science.gov (United States)

    Hajra, Rajkumar; Chakraborty, Shyamal Kumar; Tsurutani, Bruce T.; DasGupta, Ashish; Echer, Ezequiel; Brum, Christiano G. M.; Gonzalez, Walter D.; Sobral, José Humberto Andrade

    2016-07-01

    We present a geomagnetic quiet time (Dst > -50 nT) empirical model of ionospheric total electron content (TEC) for the northern equatorial ionization anomaly (EIA) crest over Calcutta, India. The model is based on the 1980-1990 TEC measurements from the geostationary Engineering Test Satellite-2 (ETS-2) at the Haringhata (University of Calcutta, India: 22.58° N, 88.38° E geographic; 12.09° N, 160.46° E geomagnetic) ionospheric field station using the technique of Faraday rotation of plane polarized VHF (136.11 MHz) signals. The ground station is situated virtually underneath the northern EIA crest. The monthly mean TEC increases linearly with F10.7 solar ionizing flux, with a significantly high correlation coefficient (r = 0.89-0.99) between the two. For the same solar flux level, the TEC values are found to be significantly different between the descending and ascending phases of the solar cycle. This ionospheric hysteresis effect depends on the local time as well as on the solar flux level. On an annual scale, TEC exhibits semiannual variations with maximum TEC values occurring during the two equinoxes and minimum at summer solstice. The semiannual variation is strongest during local noon with a summer-to-equinox variability of ~50-100 TEC units. The diurnal pattern of TEC is characterized by a pre-sunrise (0400-0500 LT) minimum and near-noon (1300-1400 LT) maximum. Equatorial electrodynamics is dominated by the equatorial electrojet which in turn controls the daytime TEC variation and its maximum. We combine these long-term analyses to develop an empirical model of monthly mean TEC. The model is validated using both ETS-2 measurements and recent GNSS measurements. It is found that the present model efficiently estimates the TEC values within a 1-σ range from the observed mean values.

  10. Preliminary estimation of Lake El'gygytgyn water balance and sediment income

    Directory of Open Access Journals (Sweden)

    G. Fedorov

    2013-07-01

    Full Text Available Modern process studies of the hydrologic balance of Lake El'gygytgyn, central Chukotka, and the sediment income from the catchment were carried out during a field campaign in spring and summer 2003. Despite high uncertainties due to the limited data, the results provide important first estimates for better understanding the modern and past sedimentation processes in this basin. Formed ca. 3.6 million years ago as a result of a meteorite impact, the basin contains one of the longest paleoclimate records in the terrestrial Arctic. Fluvial activity is concentrated over the short snowmelt period (about 20 days in second part of June. Underground outflow plays a very important role in the water balance and predominates over surface outflow. The residence time of the lake water is estimated to be about 100 yr.

  11. Age and growth of round gobies in Lake Michigan, with preliminary mortality estimation

    Science.gov (United States)

    Huo, Bin; Madenjian, Charles P.; Xie, Cong X.; Zhao, Yingming; O'Brien, Timothy P.; Czesny, Sergiusz J.

    2015-01-01

    The round goby (Neogobius melanostomus) is a prevalent invasive species throughout Lake Michigan, as well as other Laurentian Great Lakes, yet little information is available on spatial variation in round goby growth within one body of water. Age and growth of round goby at three areas of Lake Michigan were studied by otolith analysis from a sample of 659 specimens collected from 2008 to 2012. Total length (TL) ranged from 48 to 131 mm for Sturgeon Bay, from 50 to 125 mm for Waukegan, and from 54 to 129 mm for Sleeping Bear Dunes. Ages ranged from 2 to 7 years for Sturgeon Bay, from 2 to 5 years for Waukegan, and from 2 to 6 years for Sleeping Bear Dunes. Area-specific and sex-specific body–otolith relationships were used to back-calculate estimates of total length at age, which were fitted to von Bertalanffy models to estimate growth rates. For both sexes, round gobies at Sleeping Bear Dunes and Waukegan grew significantly faster than those at Sturgeon Bay. However, round goby growth did not significantly differ between Sleeping Bear Dunes and Waukegan for either sex. At all three areas of Lake Michigan, males grew significantly faster than females. Based on catch curve analysis, estimates of annual mortality rates ranged from 0.79 to 0.84. These relatively high mortality rates suggested that round gobies may be under predatory control in Lake Michigan.

  12. Hip fracture risk estimation based on principal component analysis of QCT atlas: a preliminary study

    Science.gov (United States)

    Li, Wenjun; Kornak, John; Harris, Tamara; Lu, Ying; Cheng, Xiaoguang; Lang, Thomas

    2009-02-01

    We aim to capture and apply 3-dimensional bone fragility features for fracture risk estimation. Using inter-subject image registration, we constructed a hip QCT atlas comprising 37 patients with hip fractures and 38 age-matched controls. In the hip atlas space, we performed principal component analysis to identify the principal components (eigen images) that showed association with hip fracture. To develop and test a hip fracture risk model based on the principal components, we randomly divided the 75 QCT scans into two groups, one serving as the training set and the other as the test set. We applied this model to estimate a fracture risk index for each test subject, and used the fracture risk indices to discriminate the fracture patients and controls. To evaluate the fracture discrimination efficacy, we performed ROC analysis and calculated the AUC (area under curve). When using the first group as the training group and the second as the test group, the AUC was 0.880, compared to conventional fracture risk estimation methods based on bone densitometry, which had AUC values ranging between 0.782 and 0.871. When using the second group as the training group, the AUC was 0.839, compared to densitometric methods with AUC values ranging between 0.767 and 0.807. Our results demonstrate that principal components derived from hip QCT atlas are associated with hip fracture. Use of such features may provide new quantitative measures of interest to osteoporosis.

  13. Practical models to estimate horizontal irradiance in clear sky conditions: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, German A.; Hernandez, Alejandro L.; Saravia, Luis R. [Department of Physics, School of Exact Sciences, National University of Salta, Bolivia Avenue 5150, 4400 Salta Capital (Argentina); INENCO (Institute of Non Conventional Energy Research), Bolivia Avenue 5150, 4400 Salta Capital (Argentina)

    2010-11-15

    The Argentinean Northwest (ANW) is a high altitude region located alongside Los Andes Mountains. The ANW is also one of the most insolated regions in the world due to its altitude and particular climate. However, the characterization of the solar resource in the region is incomplete as there are no stations to measure solar radiation continuously and methodically. With irradiance data recently having been measured at three sites in the Salta Province, a study was carried out that resulted in a practical model to quickly and efficiently estimate the horizontal irradiance in high altitude sites in clear sky conditions. This model uses the altitude above sea level (A) as a variable and generates a representative clearness index as a result (k{sub t-R}) that is calculated for each site studied. This index k{sub t-R} is then used with the relative optical air mass and the extraterrestrial irradiance to estimate the instantaneous clearness index (k{sub t}). Subsequently, the index k{sub t-R} is corrected by introducing the atmospheric pressure in the definition of relative optical air mass proposed by Kasten. The results are satisfactory as errors in the irradiance estimations with respect to measured values do not exceed 5% for pressure corrected air masses AM{sub c} < 2. This model will be used in a feasibility study to locate sites for the installation of solar thermal power plants in the ANW. A prototype of a CLFR solar power plant is being built in the INENCO Campus, at the National University of Salta. (author)

  14. Preliminary Evaluation of Intelligent Intention Estimation Algorithms for an Actuated Lower-Limb Exoskeleton

    Directory of Open Access Journals (Sweden)

    Mervin Chandrapal

    2013-02-01

    Full Text Available This paper describes the experimental testing of an actuated lower-limb exoskeleton. The exoskeleton is designed to alleviate the loading at the knee joint by supplying assistive torque. It is hypothesized that the support provided will reduce the muscular effort required to perform activities of daily living and thus facilitate the execution of these movements by those who previously had limited mobility. The exoskeleton is actuated by four pneumatic artificial muscles, each providing 150N of pulling force to assist in the flexion and extension of the knee joint. The exoskeleton system estimates the user's intended motion using muscle activity information recorded from five thigh muscles, together with the knee angle. To experimentally evaluate the performance of the device, the exoskeleton was worn by an able-bodied user, whilst performing the sit-to-stand-to-sit movement. In addition, the three intention estimation algorithms were also tested to determine the influence of the various algorithms on the support provided. The results show a significant reduction in the user's muscle activity (≈ 20% when assisted by the exoskeleton in a predictable manner.

  15. Preliminary Evaluation of Intelligent Intention Estimation Algorithms for an Actuated Lower-Limb Exoskeleton

    Directory of Open Access Journals (Sweden)

    Mervin Chandrapal

    2013-02-01

    Full Text Available This paper describes the experimental testing of an actuated lower-limb exoskeleton. The exoskeleton is designed to alleviate the loading at the knee joint by supplying assistive torque. It is hypothesized that the support provided will reduce the muscular effort required to perform activities of daily living and thus facilitate the execution of these movements by those who previously had limited mobility. The exoskeleton is actuated by four pneumatic artificial muscles, each providing 150N of pulling force to assist in the flexion and extension of the knee joint. The exoskeleton system estimates the user’s intended motion using muscle activity information recorded from five thigh muscles, together with the knee angle. To experimentally evaluate the performance of the device, the exoskeleton was worn by an able-bodied user, whilst performing the sit-to-stand-to-sit movement. In addition, the three intention estimation algorithms were also tested to determine the influence of the various algorithms on the support provided. The results show a significant reduction in the user’s muscle activity (≈ 20% when assisted by the exoskeleton in a predictable manner.

  16. A preliminary estimate of the economic impact of the energy amplifier

    CERN Document Server

    Fernández, R; Rubbia, Carlo; Rubio, Juan Antonio

    1996-01-01

    The basic concept and the applicability of the Energy Amplifier (EA) have been exhaustively described elsewhere (Refs. [1] to [4]). The EA is essentially a source of high quality heat, produced by the nuclear cascades induced by a high intensity proton beam inside an appropriate ³beam dump² arrangement. A fraction of such ³heat² has to be transformed into electricity to run the accelerator, the rest being available for a number of different industrial applications, and in particular commercial electricity production. In this paper the economic aspects are further explored and we attempt a first order estimate of the cost of such an energy source, comparing it critically with more conventional sources. In this task we have been greatly helped by a number of people2) who have specific competence in the industrial aspects of the application. We conclude that in agreement to our previous estimates, the practical cost of high quality heat is about US /GJ, namely and times lower than the one of Coal and Natural...

  17. Forensic age estimation from the clavicle using 1.0 T MRI—Preliminary results

    DEFF Research Database (Denmark)

    Larsen, Sara Tangmose; Jensen, Karl Erik; Villa, Chiara;

    2014-01-01

    : Motion artefacts reduced image resolution in living subjects. However, mean age at stage 4 was significantly different from mean age at stage 2 and 3. The minimum age at stage 4 was 19.8 years. Inter-observer agreement was moderate for autopsy cases and slight for living subjects. By contrasting subjects......OBJECTIVES: As forensic age estimations in the living are performed without medical indication, there is a need for the development of non-ionizing methods. This study investigates the use of 1.0T MRI to visualize the ossification status of the medial end of the clavicle. MATERIAL AND METHODS: T2...... of "incomplete fusion" (≤ stage 3 on both sides) against "fused" (at least one stage 4), agreement rate rose to moderate (K=0.414) for living subjects. Despite the low agreement rate, no subject younger than 18 years was assessed as having "fused" clavicles. CONCLUSION: At lower image resolution, a 2-stage...

  18. Preliminary Estimation of Radioactive Cesium Concentration due to Hypothetical Accident in East Sea

    Energy Technology Data Exchange (ETDEWEB)

    Min, Byung-Il; Kim, Sora; Park, Kihyun; Suh, Kyung-suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The sea has no large islands, bays or capes. Its water balance is mostly determined by the inflow (Korea Strait) and outflow (Tsugaru Strait and Soya Strait) through the straits connecting it to the neighboring seas and Pacific Ocean. All of the Korean nuclear power plants are located in the coastal area, 3 sites in the east coast and 1 site in the west coast. So the Korean nuclear power plants there may be possibility that such dangerous substances spread out of the East Sea. The East Sea is a fertile fishing ground for surrounding counties. The environmental radionuclides concentration estimation is important for fish and sea plants may be contaminated by those radioactive materials. In order to simplify the problem, the experiment has been considered the many simplifying assumptions. The bed sediments are uniform over all the model domain, using the monthly mean ocean current data set and ignored effect of the facilities for damage preventions.

  19. Preliminary Modeling of Permanent Magnet Probe Flowmeter for Voltage Signal Estimation

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Uiju; Kim, Sung Joong [Hanyang Univ., Seoul (Korea, Republic of); Jeong, Ji Young; Kim, Tae Joon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-10-15

    An experimental study on performance analysis of the flowmeter has been performed. The study shows that sodium flow rate is linearly proportional to the induced voltage signal from the flowmeter under the turbulent flow condition. The experimental results support its availability in the PDRC system. But, the flowmeter should be able to measure sodium flow at low Reynolds number as well. That is because the PDRC system uses sodium natural convection for its operation. Thus, calibration of the flowmeter should be done at very low sodium flow rates. However, Von Weissenfluh et al. showed that the relationship between flow rate and measured voltage signal from the flowmeter may become non-linear at very low flow rates. The nonlinearity restricts the utilization of level sensor which provide reference flow rate in the calibration experiment. The primary objective of this study is to predict the sodium flow rate range where the induced voltage signals are linearly proportional to flow rates by estimating the induced voltage signals against sodium flow rates for a wide range of flows numerically. A commercial code FLUENT is adopted for the analysis of flow field. And MAXWELL which is an electromagnetic analysis software using a finite volume method has been used to analyze the magnetic field generated by permanent magnet of the flowmeter. The induced voltage signals have been estimated by coupling the sodium flow field and the magnetic field using FLUENT MHD module. It is expected that the PMPF voltage signals are linearly proportional to flow rates range of 0.0059 to 1.96 lps. This suggests that simple calibration technique using the linearity between flow rate and the voltage signal can be adopted in calibration of the PMPF.

  20. Preliminary estimates of Gulf Stream characteristics from TOPEX data and a precise gravimetric geoid

    Science.gov (United States)

    Rapp, Richard H.; Smith, Dru A.

    1994-01-01

    TOPEX sea surface height data has been used, with a gravimetric geoid, to calculate sea surface topography across the Gulf Stream. This topography was initially computed for nine tracks on cycles 21 to 29. Due to inaccurate geoid undulations on one track, results for eight tracks are reported. The sea surface topography estimates were used to calculate parameters that describe Gulf Stream characteristics from two models of the Gulf Stream. One model was based on a Gaussian representation of the velocity while the other was a hyperbolic representation of velocity or the sea surface topography. The parameters of the Gaussian velocity model fit were a width parameter, a maximum velocity value, and the location of the maximum velocity. The parameters of the hyperbolic sea surface topography model were the width, the height jump, position, and sea surface topography at the center of the stream. Both models were used for the eight tracks and nine cycles studied. Comparisons were made between the width parameters, the maximum velocities, and the height jumps. Some of the parameter estimates were found to be highly (0.9) correlated when the hyperbolic sea surface topography fit was carried out, but such correlations were reduced for either the Gaussian velocity fits or the hyperbolic velocity model fit. A comparison of the parameters derived from 1-year TOPEX data showed good agreement with values derived by Kelly (1991) using 2.5 years of Geosat data near 38 deg N, 66 deg W longitude. Accuracy of the geoid undulations used in the calculations was of order of +/- 16 cm with the accuracy of a geoid undulation difference equal to +/- 15 cm over a 100-km line in areas with good terrestrial data coverage. This paper demonstrates that our knowledge or geoid undulations and undulation differences, in a portion of the Gulf Stream region, is sufficiently accurate to determine characteristics of the jet when used with TOPEX altimeter data. The method used here has not been shown to

  1. Preliminary estimates of Gulf Stream characteristics from TOPEX data and a precise gravimetric geoid

    Science.gov (United States)

    Rapp, Richard H.; Smith, Dru A.

    1994-01-01

    TOPEX sea surface height data has been used, with a gravimetric geoid, to calculate sea surface topography across the Gulf Stream. This topography was initially computed for nine tracks on cycles 21 to 29. Due to inaccurate geoid undulations on one track, results for eight tracks are reported. The sea surface topography estimates were used to calculate parameters that describe Gulf Stream characteristics from two models of the Gulf Stream. One model was based on a Gaussian representation of the velocity while the other was a hyperbolic representation of velocity or the sea surface topography. The parameters of the Gaussian velocity model fit were a width parameter, a maximum velocity value, and the location of the maximum velocity. The parameters of the hyperbolic sea surface topography model were the width, the height jump, position, and sea surface topography at the center of the stream. Both models were used for the eight tracks and nine cycles studied. Comparisons were made between the width parameters, the maximum velocities, and the height jumps. Some of the parameter estimates were found to be highly (0.9) correlated when the hyperbolic sea surface topography fit was carried out, but such correlations were reduced for either the Gaussian velocity fits or the hyperbolic velocity model fit. A comparison of the parameters derived from 1-year TOPEX data showed good agreement with values derived by Kelly (1991) using 2.5 years of Geosat data near 38 deg N, 66 deg W longitude. Accuracy of the geoid undulations used in the calculations was of order of +/- 16 cm with the accuracy of a geoid undulation difference equal to +/- 15 cm over a 100-km line in areas with good terrestrial data coverage. This paper demonstrates that our knowledge or geoid undulations and undulation differences, in a portion of the Gulf Stream region, is sufficiently accurate to determine characteristics of the jet when used with TOPEX altimeter data. The method used here has not been shown to

  2. Preliminary investigation to estimate soil NAPL retention using parametric pedotransfer functions

    Science.gov (United States)

    Hernádi, Hilda; Makó, András

    2014-10-01

    Organic liquid retention of soils is a primary input variable for modelling the nonaqueous phase liquid transport and behaviour in the subsurface. In environmental and soil physical practice, it is mainly determined by scaling based on the water retention of soils or with charts of average empirical values of organic liquid retention or the fitting parameters of hydraulic functions. Predicting the fitting parameters of organic liquid retention curves with pedotransfer functions might be a promising alternative method, but this topic has only been researched to a limited extent. Thus we investigated the applicability of different hydraulic functions (3- and 4- parameter form of the van Genuchten equation and Brutsaert equation) for fitting organic liquid retention characteristics. Multivariate linear regression was used to build and develop pedotransfer functions, modelling relations between original and transformed values of basic soil properties and organic liquid retention. We attempted to generate parametric pedotransfer functions. According to our results, the applicability of hydraulic functions for fitting nonaqueous phase liquid retention curves to the experimental data was proven. The investigations gave promising results for the possibility to estimate soil nonaqueous phase liquid retention with parametric pedotransfer functions.

  3. Capacity estimation and preliminary strategy for reducing the release of dioxins in China

    Institute of Scientific and Technical Information of China (English)

    YU Gang; ZHANG Qing; HUANG Jun; CAI Zhenxiao; SUI Qian

    2007-01-01

    As a party of the Stockholm Convention on Persistent Organic Pollutants,China must submit its national implementation plan(NIP)for this convention.The strategy and action plan for reducing the release of dioxins in China are the most important components of the NIP.Three problems are key points for developing such strategy and action plan-what are the key sources for applying the best available technology/best environmental practice(BAT/BEP)to reduce the release of dioxins?How about the capacity for reducing the dioxins release from the key sources?Where are the areas of priority for applying BAT/BEP?This paper shows the efforts towards the solution of these problems.The list of key sources covering about half of the total dioxins release was determined considering four criteria.The capacity of key sources were estimated based on the difference between the emission factor corresponding to the actual situation in 2004 and that corresponding to the scenario that all key sources have been applied BAT/BEP to reduce the dioxins release.The priority analysis using the geographical information system(GIS)tool has revealed that eastern provinces should be of high priority in the future reduction activities of dioxins release in China.

  4. Beyond Public Particpation: The disjuncture between South Africa's Environmental Impact Assessment (EIA Law and Sustainable Development

    Directory of Open Access Journals (Sweden)

    T Murombo

    2008-10-01

    Full Text Available One of the key strategies for achieving sustainable development is the use of the process of evaluating the potential environmental impacts of development activities. The procedure of environmental impact assessment (EIA implements the principle of integration which lies at the core of the concept of sustainable development by providing a process through which potential social, economic and environmental impacts of activities are scrutinised and planned for. Sustainable development may not be achieved without sustained and legally mandated efforts to ensure that development planning is participatory. The processes of public participation play a crucial role in ensuring the integration of the socio-economic impacts of a project into the environmental decision-making processes. Public participation is not the only process, nor does the process always ensure the achievement of sustainable development. Nevertheless, decisions that engage the public have the propensity to lead to sustainable development. The public participation provisions in South Africa’s EIA regulations promulgated under the National Environmental Management Act 107 of 1998 show a disjuncture between the idea of public participation and the notion of sustainable development. The provisions do not create a framework for informed participation and leave a wide discretion to environmental assessment practitioners (EAPs regarding the form which participation should assume. In order for environmental law, specifically EIA laws, to be effective as tools to promote sustainable development the laws must, among other things, provide for effective public participation. The judiciary must also aid in the process by giving content to the legal provisions on public participation in the EIA process.

  5. An Investigation of the Factors Affecting Performance of Environmental Impact Assessment Practices (EIA in Pakistan

    Directory of Open Access Journals (Sweden)

    Shahbaz Hussain

    2015-01-01

    Full Text Available Environmental Impact Assessment is used to detect changes that a proposed project may have on environment. The intent of present study is to investigate impact of institutional capacity and legal framework on performance of Environmental Impact Assessment practices in Pakistan such as screening, scoping and mitigation, environmental management plan and reporting. Sample of 200 EIA professionals have been selected by using random sampling approach from all provinces of Pakistan. Data has been collected through structured questionnaire and analysed by using AMOS 19 (Analysis of Moment Structures software. Results of path analysis indicated that institutional capacity and legal framework have significant direct impact on performance of all EIA practices in Pakistan. Model fit statistics such as GFI, RMR, NFI, IFI, TLI, RFI, CFI indicate the fitness of research model in this context. It has been suggested that there must be relevant and sufficient human resources that can uplift institutional capacity and legal framework must be well implemented because it will lead to enhanced performance of EIA practices in Pakistan.

  6. Joint U.S./Russian Study on the Development of a Preliminary Cost Estimate of the SAFSTOR Decommissioning Alternative for the Leningrad Nuclear Power Plant Unit #1

    Energy Technology Data Exchange (ETDEWEB)

    SM Garrett

    1998-09-28

    The objectives of the two joint Russian/U.S. Leningrad Nuclear Power Plant (NPP) Unit #1 studies were the development of a safe, technically feasible, economically acceptable decom missioning strategy, and the preliminary cost evaluation of the developed strategy. The first study, resulting in the decommissioning strategy, was performed in 1996 and 1997. The preliminary cost estimation study, described in this report, was performed in 1997 and 1998. The decommissioning strategy study included the analyses of three basic RBM.K decommission- ing alternatives, refined for the Leningrad NPP Unit #1. The analyses included analysis of the requirements for the planning and preparation as well as the decommissioning phases.

  7. Quantitative assessment of the microbial risk of leafy greens from farm to consumption: preliminary framework, data, and risk estimates.

    Science.gov (United States)

    Danyluk, Michelle D; Schaffner, Donald W

    2011-05-01

    This project was undertaken to relate what is known about the behavior of Escherichia coli O157:H7 under laboratory conditions and integrate this information to what is known regarding the 2006 E. coli O157:H7 spinach outbreak in the context of a quantitative microbial risk assessment. The risk model explicitly assumes that all contamination arises from exposure in the field. Extracted data, models, and user inputs were entered into an Excel spreadsheet, and the modeling software @RISK was used to perform Monte Carlo simulations. The model predicts that cut leafy greens that are temperature abused will support the growth of E. coli O157:H7, and populations of the organism may increase by as much a 1 log CFU/day under optimal temperature conditions. When the risk model used a starting level of -1 log CFU/g, with 0.1% of incoming servings contaminated, the predicted numbers of cells per serving were within the range of best available estimates of pathogen levels during the outbreak. The model predicts that levels in the field of -1 log CFU/g and 0.1% prevalence could have resulted in an outbreak approximately the size of the 2006 E. coli O157:H7 outbreak. This quantitative microbial risk assessment model represents a preliminary framework that identifies available data and provides initial risk estimates for pathogenic E. coli in leafy greens. Data gaps include retail storage times, correlations between storage time and temperature, determining the importance of E. coli O157:H7 in leafy greens lag time models, and validation of the importance of cross-contamination during the washing process.

  8. Environmental impact assessment (EIA) in development cooperation. A presentation of development challenges and research issues in developing countries and donor agencies

    Energy Technology Data Exchange (ETDEWEB)

    Kristoffersen, Harald

    1997-12-31

    This document discusses some development challenges and research needs related to environmental impact assessment (EIA) in development cooperation. After a general introduction to basic principles of EIA, the document deals with some general conditions for EIA in developing countries and in donor agencies. Through a presentation of experiences with EIA from selected donor agencies (with emphasis on NORAD) the report ends up with focusing on some research issues that may come up with recommendations for improving EIA practices in developing countries and donor agencies. 37 refs., 6 figs., 3 refs.

  9. Environmental Impact Assessment (EIA of Gas Pipeline Transmission (Case Study: Duzduzan – Ahar

    Directory of Open Access Journals (Sweden)

    Saeed Karimi

    2014-12-01

    Full Text Available The national gas transmission Ahar – Duzduzan, transmit fresh gas in the West north of Iran. According to Iran’s environmental regulation, construction and operation of pipelines is required EIA studies. Due to this linear project it is required to develop a particular EIA methodology on this kind of projects. Therefore at first we attempted to get a real knowledge about environmental endnotes of project with library and field studies. Along with reviewing the technical resources of the project, attempted to identify all of the construction and operation activities. Finally two methods of explanatory checklist and simplified matrix selected for EIA. In The construction phase 19 micro activities have evaluated in front of about 12 environmental factors (in the various environments. In the construction phase, activities such as; excavation, embankment and excavation show the greatest negative impact on the whole environment of area. And the most important activity with positive effects on the aforementioned factors is manpower recruitment. Also In the operation phase 15 micro activities have evaluated in front of about 15 environmental factors (in the various environments. In the Operation phase activities such as; grazing, vehicle traffic and wastewater production can have negative effects. Most positive impacts on environmental factors are revenue and welfare, employment levels, commerce and manning activities, immigration control and air quality. Most of the Operation phase effects are positive which involve; exploitation of gas or natural gas transportation and gas pipeline monitoring. According to the developed methodology it is necessary to use RS and GIS tools in the study current environment situation, routing environmental alternatives and make land use maps of transmission path. With regard to all issues presented in explanatory checklist of this project and also previous clauses from the standpoint of environmental compliance

  10. The Inception and Evolution of EIA and Environmental Clearance Process – Laying Emphasis on Sustainable Development and Construction

    Directory of Open Access Journals (Sweden)

    Devarshi Tathagat

    2015-03-01

    Full Text Available EIA which stands for environmental impact assessment is a domain which encompasses almost all areas of environmental engineering. EIA and environmental clearance (EC are two things which MoEF, Govt. Of India has mandated for many categories of project before their commissioning. Buildings with built up area of more than 20000 metre square and townships with area more than 50 Ha or 150000 square metre of built up area comes under it. A thorough report is made for the possible outcomes of the project (i.e..it‟s impact on surrounding environment. If the impact is within the limits as specified by MoEF and SEAC, it is sent for approval otherwise client is suggested to take corrective steps. Scope of the topic trespasses the boundaries of green house gas emissions and global warming, water and energy crises, carbon emission and sequestration, environmental pollution of various kind. It was EIA that brought in an element on environment in all projects. It lead to eco friendly and sustainable construction techniques which paved way for the concept of green building. Today EIA and environmental clearance are the only protectors of environment from the greeds of corporate sector across globe. If applied with stringency it will usher us to an era where any advancement will be apsolutely in tune with nature.This technical paper deals with the birth and growth of EIA in the world and in India. It deals with the processes that are involved in carrying out EIA for a project and subsequently providing it with environmental clearance. Also it emphasizes on how EIA led to a general awareness and paved way for the concept of sustainable construction.

  11. Estimation of tumour dose enhancement due to gold nanoparticles during typical radiation treatments: a preliminary Monte Carlo study

    Energy Technology Data Exchange (ETDEWEB)

    Cho, S H [Department of Radiation Physics, University of Texas M D Anderson Cancer Center, 1515 Holcombe Blvd, Unit 94, Houston, TX 77030 (United States)

    2005-08-07

    A recent mice study demonstrated that gold nanoparticles could be safely administered and used to enhance the tumour dose during radiation therapy. The use of gold nanoparticles seems more promising than earlier methods because of the high atomic number of gold and because nanoparticles can more easily penetrate the tumour vasculature. However, to date, possible dose enhancement due to the use of gold nanoparticles has not been well quantified, especially for common radiation treatment situations. Therefore, the current preliminary study estimated this dose enhancement by Monte Carlo calculations for several phantom test cases representing radiation treatments with the following modalities: 140 kVp x-rays, 4 and 6 MV photon beams, and {sup 192}Ir gamma rays. The current study considered three levels of gold concentration within the tumour, two of which are based on the aforementioned mice study, and assumed either no gold or a single gold concentration level outside the tumour. The dose enhancement over the tumour volume considered for the 140 kVp x-ray case can be at least a factor of 2 at an achievable gold concentration of 7 mg Au/g tumour assuming no gold outside the tumour. The tumour dose enhancement for the cases involving the 4 and 6 MV photon beams based on the same assumption ranged from about 1% to 7%, depending on the amount of gold within the tumour and photon beam qualities. For the {sup 192}Ir cases, the dose enhancement within the tumour region ranged from 5% to 31%, depending on radial distance and gold concentration level within the tumour. For the 7 mg Au/g tumour cases, the loading of gold into surrounding normal tissue at 2 mg Au/g resulted in an increase in the normal tissue dose, up to 30%, negligible, and about 2% for the 140 kVp x-rays, 6 MV photon beam, and {sup 192}Ir gamma rays, respectively, while the magnitude of dose enhancement within the tumour was essentially unchanged. (note)

  12. Estimation of tumour dose enhancement due to gold nanoparticles during typical radiation treatments: a preliminary Monte Carlo study.

    Science.gov (United States)

    Cho, Sang Hyun

    2005-08-07

    A recent mice study demonstrated that gold nanoparticles could be safely administered and used to enhance the tumour dose during radiation therapy. The use of gold nanoparticles seems more promising than earlier methods because of the high atomic number of gold and because nanoparticles can more easily penetrate the tumour vasculature. However, to date, possible dose enhancement due to the use of gold nanoparticles has not been well quantified, especially for common radiation treatment situations. Therefore, the current preliminary study estimated this dose enhancement by Monte Carlo calculations for several phantom test cases representing radiation treatments with the following modalities: 140 kVp x-rays, 4 and 6 MV photon beams, and 192Ir gamma rays. The current study considered three levels of gold concentration within the tumour, two of which are based on the aforementioned mice study, and assumed either no gold or a single gold concentration level outside the tumour. The dose enhancement over the tumour volume considered for the 140 kVp x-ray case can be at least a factor of 2 at an achievable gold concentration of 7 mg Au/g tumour assuming no gold outside the tumour. The tumour dose enhancement for the cases involving the 4 and 6 MV photon beams based on the same assumption ranged from about 1% to 7%, depending on the amount of gold within the tumour and photon beam qualities. For the 192Ir cases, the dose enhancement within the tumour region ranged from 5% to 31%, depending on radial distance and gold concentration level within the tumour. For the 7 mg Au/g tumour cases, the loading of gold into surrounding normal tissue at 2 mg Au/g resulted in an increase in the normal tissue dose, up to 30%, negligible, and about 2% for the 140 kVp x-rays, 6 MV photon beam, and 192Ir gamma rays, respectively, while the magnitude of dose enhancement within the tumour was essentially unchanged.

  13. UK and Italian EIA systems: A comparative study on management practice and performance in the construction industry

    Energy Technology Data Exchange (ETDEWEB)

    Bassi, Andrea, E-mail: ab395@bath.co.uk [University of Bath, Faculty of Engineering and Design, Claverton Down, Bath BA2 7AY (United Kingdom); Howard, Robert, E-mail: robhoward@constcom.demon.co.uk [Construction Communications, 8 Cotton& #x27; s Field, Dry Drayton, Cambridge CB23 8DG (United Kingdom); Geneletti, Davide, E-mail: davide.geneletti@ing.unitn.it [Sustainability Science Program, Harvard University, 79 JFK Street, Cambridge, MA 02138 (United States); Dept. of Civil and Environmental Engineering, University of Trento, Via Mesiano, 77 38123 Trento (Italy); Ferrari, Simone, E-mail: simone.ferrari@polimi.it [Dept. BEST, Building Environment Science and Technology, Politecnico di Milano, Via Bonardi, 3 20133 Milano (Italy)

    2012-04-15

    This study evaluates and contrasts the management practice and the performance that characterise Environmental Impact Assessments (EIA) in Italy and in the UK. The methodology relies on the investigation of six carefully selected case studies, critically reviewed by referring to EIA and project design information, as well as collecting the opinion of key project participants. The study focuses on the construction industry and on specific key sectors like infrastructure for transport and renewable energy and commercial and tourism development. A main term of reference for the analyses has been established by critically reviewing international literature so as to outline common good practice, requirements for the enhancement of sustainability principles and typically incurred drawbacks. The proposed approach enhances transfer of knowledge and of experiences between the analyzed contexts and allows the provision of guidelines for practitioners. Distinctive differences between the UK and the Italian EIA systems have been detected for pivotal phases and elements of EIA, like screening, scoping, analysis of alternatives and of potential impacts, definition of mitigation strategies, review, decision making, public participation and follow up. - Highlights: Black-Right-Pointing-Pointer The Italian and the UK Environmental Impact Assessment systems are compared. Black-Right-Pointing-Pointer The research is centred on the construction industry. Black-Right-Pointing-Pointer Issues and shortcomings are analysed by investigating six case studies. Black-Right-Pointing-Pointer Integration of EIA with sustainability principles is appraised. Black-Right-Pointing-Pointer General guidelines are provided to assist practitioners in the two national contexts.

  14. The influence of actor capacities on EIA system performance in low and middle income countries —Cases from Georgia and Ghana

    Energy Technology Data Exchange (ETDEWEB)

    Kolhoff, Arend J., E-mail: akolhoff@eia.nl [Netherlands Commission for Environmental Assessment, P.O. Box 2345, 3500 GH Utrecht (Netherlands); Runhaar, Hens A.C., E-mail: H.A.C.Runhaar@uu.nl [Environmental Studies and Policy, Copernicus Institute of Sustainable Development, Utrecht University, Utrecht (Netherlands); Forest and Nature Conservation Policy Group, Wageningen University and Research Centre, Wageningen (Netherlands); Gugushvili, Tamar, E-mail: gugushvili.tamuna@gmail.com [Netherlands Commission for Environmental Assessment, P.O. Box 2345, 3500 GH Utrecht (Netherlands); Sonderegger, Gabi, E-mail: gabi.sonderegger@gmail.com [Netherlands Commission for Environmental Assessment, P.O. Box 2345, 3500 GH Utrecht (Netherlands); Van der Leest, Bart, E-mail: bartvanderleest@hotmail.com [Netherlands Commission for Environmental Assessment, P.O. Box 2345, 3500 GH Utrecht (Netherlands); Driessen, Peter P.J., E-mail: p.driessen@uu.nl [Innovation and Environmental Sciences, Copernicus Institute of Sustainable Development, Utrecht University, Utrecht (Netherlands)

    2016-02-15

    In this paper, we aim to better understand the factors that contribute to the substantive performance of EIA systems in low and middle income countries. Substantive performance is defined as the extent to which the EIA process contributes to the EIA objectives for the long term, namely environmental protection or, even more ambitious, sustainable development. We have therefore developed a conceptual model in which we focus on the key actors in the EIA system, the proponent and the EIA authority and their level of ownership as a key capacity to measure their performance, and we distinguish procedural performance and some contextual factors. This conceptual model is then verified and refined for the EIA phase and the EIA follow-up phase (permitting, monitoring and enforcement) by means of 12 case studies from Ghana (four cases) and Georgia (eight cases), both lower–middle income countries. We observe that in most cases the level of substantive performance increases during the EIA phase but drops during the EIA follow-up phase, and as a result only five out of 12 operational cases are in compliance with permit conditions or national environmental standards. We conclude, firstly that ownership of the proponent is the most important factor explaining the level of substantive performance; the higher the proponent's level of ownership the higher the level of substantive performance. The influence of the EIA authority on substantive performance is limited. Secondly, the influence of procedural performance on substantive performance seems less important than expected in the EIA phase but more important during the EIA follow-up phase. In order to improve substantive performance we learned two lessons. Firstly, increasing the proponent's level of ownership seems obvious, but direct change is probably difficult. However, where international finance institutes are involved they can increase ownership. Despite the limited influence of the EIA authority, a proactive

  15. Comparison between the Chinese EIA Guidelines for Air Dispersion Modelling and the Advanced Air Dispersion Model ADMS

    Institute of Scientific and Technical Information of China (English)

    David Carruthers; Sheng Xiangyu; Christine McHugh

    2005-01-01

    This paper makes comparisons between Chinese Environmental Impact Assessment (EIA)Guidelines for Air dispersion modelling and the advanced air dispersion model ADMS. Since 2001 the ADMS model has been the first and only foreign model that has been approved by the Appraisal Center for Environment and Engineering (ACEE) to be used in EIA projects in China (http://www. china-eia.com/inden_content/rjrz/rjrz_ADMS/htm). In the paper the following sections provide brief descriptions of the main features of the Chinese Guidelines for Air Dispersion (Section 2) and ADMS (Section 3);Section 4 provides a comparison of the two modelling methods for some simple cases and conclusions and discussion are given in Section 5.

  16. Preliminary Estimates of Loss of Juvenile Anadromous Salmonids to Predators in John Day Reservoir and Development of a Predation Model : Interim Report, 1986.

    Energy Technology Data Exchange (ETDEWEB)

    Rieman, Bruce E.

    1986-03-01

    We made preliminary estimates of the loss of juvenile salmonids to predation by walleye, Stizostedion v. vitreum, and northern squawfish, Ptychocheilus oregonensis, in John Day Reservoir in 1984 and 1985 using estimates of predator abundance and daily prey consumption rates. Preliminary estimates may be biased and may be adjusted as much as 30%, but indications are that predation could account for the majority of unexplained loss of juvenile salmonids in John Day Reservoir. Total loss was estimated at 4.1 million in 1984 and 3.3 million in 1985. Northern squawfish consumed 76% and 92% of these totals, respectively. The majority of loss occurred in mid reservoir areas, but loss in a small area, the boat-restricted zone immediately below McNary Dam, was disproportionately large. Peaks in loss in May and July corresponded with peaks in availability of salmonids. Estimated mortality from predation for April through June in 1984 and 1985 was 9% and 7% respectively, for chinook salmon, Oncorhynchus tshawytscha, and 10% and 15% for steelhead, Salmogairdneri. Mortality was variable with time but tended to increase over the period of migration. Mortality of chinook was estimated at 26% to 55% during July and August. A model of predation in John Day Reservoir is outlined. The model includes a predation submodel that can calculate loss from predator number and consumption rate; a population submodel that can relate predator abundance and population structure to recruitment, exploitation, natural mortality and growth; and a distribution submodel that can apportion predators among areas of the reservoir over time. Applications of the model are discussed for projecting expected changes in predation over time and identifying management alternatives that might limit the impact of predation.

  17. State energy data report 1996: Consumption estimates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The State Energy Data Report (SEDR) provides annual time series estimates of State-level energy consumption by major economic sectors. The estimates are developed in the Combined State Energy Data System (CSEDS), which is maintained and operated by the Energy Information Administration (EIA). The goal in maintaining CSEDS is to create historical time series of energy consumption by State that are defined as consistently as possible over time and across sectors. CSEDS exists for two principal reasons: (1) to provide State energy consumption estimates to Members of Congress, Federal and State agencies, and the general public and (2) to provide the historical series necessary for EIA`s energy models. To the degree possible, energy consumption has been assigned to five sectors: residential, commercial, industrial, transportation, and electric utility sectors. Fuels covered are coal, natural gas, petroleum, nuclear electric power, hydroelectric power, biomass, and other, defined as electric power generated from geothermal, wind, photovoltaic, and solar thermal energy. 322 tabs.

  18. Nord Stream’s Extension to the Kurgalsky Peninsula: Implications for an EIA

    Directory of Open Access Journals (Sweden)

    Lott, Alexander

    2016-10-01

    Full Text Available Nord Stream is planning to lay two submarine pipelines in the Baltic Sea in addition to the ones which already enable the export of natural gas from the Russian Arctic to Germany and the European Union (EU. The main difference between the initial Nord Stream project and the extension project is that the Russian landfall is now planned to be located on the southern coast instead of the northern coast of the Gulf of Finland. The location of the Russian landfall is not yet finally determined. According to Nord Stream the landfall will either be stationed in the Kurgalsky Peninsula or in the Soikinsky Peninsula. Unlike the Soikinsky Peninsula, the Kurgalsky Peninsula is a Ramsar wetland of international importance, a coastal and marine Baltic Sea protected area as well as a candidate Emerald site. Its environment is thus protected currently under both the Ramsar and Helsinki conventions. International environmental organisations deem the project as a danger to the protected area. Nonetheless, due to feasibility reasons Nord Stream has considered the Kurgalsky Peninsula advantageous in comparison with the Soikinsky Peninsula as it would significantly reduce onshore and offshore pipeline route length. The aim of this paper is to establish whether Nord Stream and Russia are obligated to applyan EIA procedure in respect of the potential construction activities in and near the Kurgalsky Peninsula under international law and, if so, under which legal instruments it should be done. In particular, the paper aims at mapping some of the interconnections between the environmental impact assessment (EIA procedure and the relevant international conventions in the fields of marine environmental protection, protection of migratory birds and biological diversity.

  19. An analysis framework for characterizing and explaining development of EIA legislation in developing countries-Illustrated for Georgia, Ghana and Yemen

    Energy Technology Data Exchange (ETDEWEB)

    Kolhoff, Arend J., E-mail: akolhoff@eia.nl [Netherlands Commission for Environmental Assessment, P.O. Box 2345, 3500 GH Utrecht (Netherlands); Driessen, Peter P.J., E-mail: p.driessen@uu.nl [Copernicus Institute of Sustainable Development, Utrecht University, P.O. Box 80115, 3508 TC (Netherlands); Runhaar, Hens A.C., E-mail: h.a.c.runhaar@uu.nl [Copernicus Institute of Sustainable Development, Utrecht University, P.O. Box 80115, 3508 TC (Netherlands)

    2013-01-15

    Actors in the field of international development co-operation supporting the development of EIA legislation in developing countries often do not achieve the results envisaged. The performance of EIA in these countries often remains weak. One reason, we assume, is that often those actors support the establishment of overly ambitious EIA legislation that cannot achieve its objectives in the light of constraining contexts. To provide more effective support we need to better understand the enabling and constraining contextual factors that influence the development of EIA legislation and to which support actors should align itself. In this article a new analysis framework for classifying, characterizing and explaining the development of EIA legislation is described, measured in terms of ambition levels. Ambitions are defined as intentions the EIA authorities aim to fulfill, expressed in formal EIA legislation. Three country cases, Yemen, Georgia and Ghana are used to illustrate the usefulness of our framework and as a first test to refine the framework. We have formulated the following five hypotheses that complement and refine our analysis framework. One, EIA legislation may develop multilinearly in terms of ambition levels. Two, ambitions in EIA legislation seem to be influenced to a great extent by the power and capacity of, on the one hand, the environmental authorities supporting EIA and, on the other hand, the sector authorities hindering the development of EIA. Three, the political system is the most important context factor influencing the rules of policy-making and the power of the different actors involved. Four, the importance of context factors on the development of ambitions is dependent on the phase of EIA system development. Five, some ambitions seem to be influenced by particular factors; for instance the ambitions for the object of study seem to be influenced by the level of environmental awareness of the sector ministries and parliament. The analysis

  20. Immune status of health care workers to measles virus: evaluation of protective titers in four measles IgG EIAs

    NARCIS (Netherlands)

    Dorigo-Zetsma, J.W.; Hall, M.A.; Vreeswijk, J.; Vries, J.J. de; Vossen, A.C.; Hulscher, H.I. Ten; Kerkhof, J.; Smits, G.P.; Ruijs, W.L.M.; Koopmans, M.P.; Binnendijk, R.S. van

    2015-01-01

    BACKGROUND: Following the recognition of a measles case in a hospital in The Netherlands, health care workers (HCW) from the premises were screened by a commercial enzyme immunoassay (EIA) for measles IgG to identify persons at risk for measles. At least 10% of the HCW were tested measles

  1. 30 CFR 250.261 - What environmental impact analysis (EIA) information must accompany the DPP or DOCD?

    Science.gov (United States)

    2010-07-01

    ... production activities; (2) Be project specific; and (3) Be as detailed as necessary to assist the Regional... resources, conditions, and activities identified by the Regional Supervisor. (c) Environmental impacts. Your EIA must: (1) Analyze the potential direct and indirect impacts (including those from accidents...

  2. Immune status of health care workers to measles virus: evaluation of protective titers in four measles IgG EIAs

    NARCIS (Netherlands)

    Dorigo-Zetsma, J.W.; Hall, M.A.; Vreeswijk, J.; Vries, J.J. de; Vossen, A.C.; Hulscher, H.I. Ten; Kerkhof, J.; Smits, G.P.; Ruijs, W.L.M.; Koopmans, M.P.; Binnendijk, R.S. van

    2015-01-01

    BACKGROUND: Following the recognition of a measles case in a hospital in The Netherlands, health care workers (HCW) from the premises were screened by a commercial enzyme immunoassay (EIA) for measles IgG to identify persons at risk for measles. At least 10% of the HCW were tested measles IgG-negati

  3. Preliminary Approach on the Estimation of Ponto-Sarmatic Habitats’ Preservation in NE Romania via Herpetological Indicators

    Directory of Open Access Journals (Sweden)

    Dan Laurentiu STOICA

    2013-02-01

    Full Text Available The present scientific approach proposes a preliminary study on habitat suitability and factors’ influence using the herpetological indicator Vipera ursinii moldavica and is intended to depict well adapted preservation measures for the Ponto-Sarmatic ecosystems in the context of increased human pressure. The primary goal is to establish an impact hierarchy for the controlling factors. The study incorporates various natural and human related factors via correspondence analysis in order to mark out for the most influential ones. The goal is to enhance understanding of variables’ contribution to the process and find appropriate intervention measures as far as the Natura 2000 Management Plans are concerned

  4. Preliminary study on proportional and simultaneous estimation of hand posture using surface EMG based on synergy concept.

    Science.gov (United States)

    Li, Shunchong; Chen, Xingyu; Sheng, Xinjun; Zhu, Xiangyang

    2013-01-01

    Most of current myoelectric prostheses are using sequential and on-off control strategy within pattern classification framework, which is of robustness. But it is not a natural neuromuscular control scheme. On the other hand, there are two difficulties to control the prosthesis proportionally and simultaneously. First, human hand is high dimensional with more than 20 degrees-of-freedom (DOFs); Second, extracting such control information from EMG is hard due to signal crosstalk and noises. This paper is aimed at proposing a new method for proportional and simultaneous myoelectric control, taking advantage of synergy concept. The hand motion and corresponding forearm EMG signals were collected simultaneously. Principal component analysis (PCA) is used to reduce hand motion dimension. And support vector regression (SVR) is adopted to build the connection between hand posture and EMG. Offline analysis validated the effectiveness of this method, and preliminary and positive results have been obtained.

  5. Detecting Adreno-Cortical Activity in Gorillas: A Comparison of Faecal Glucocorticoid Measures Using RIA Versus EIA

    Directory of Open Access Journals (Sweden)

    J.B. Nizeyi

    2011-04-01

    Full Text Available The conservation community is concerned that the remnants of highly endangered Mountain gorilla are being exposed to enormous stressors in their habitat but no assay has been validated to monitor stress markers in their fecal medium. Non specific ICN Corticosterone RIA and Munro Cortisol EIA were validated for measurement of free-ranging Mountain gorilla Faecal Glucocorticoids Metabolites (FGM to non-invasively detect effect of environmental stressors on the adrenocortical activity in gorillas. Parallelism and quantitative recovery of FGM showed that the RIA and EIA can reliably measure corticoid metabolites in this medium. High Performance Liquid Chromatography confirmed presence of FGM in faecal extracts. Peak immunoreactive metabolites constituting 35.43% of FGM measured by the RIA co-eluted with maximum corticosterone radioactivity, the EIA measured multiple immunoreactive peak metabolites which were less polar than the cortisol, corticosterone and DOC standard hormones. For Lowland gorilla, peak FGM eluted at fractions 27 and 53 under the 100% Isocratic gradient (San Diago protocol, and 20-80% Methanol gradient (National Zoo protocol respectively; while peak FGM eluted at fraction 8 and 47 in Mountain gorilla under 100% Isocratic and 20-80% Methanol gradients respectively. After injection of Lowland gorilla with long acting Adrenal Cortico-trophic Hormone (ACTH gel (150U Acthar Gel, urinary cortisol increased by 5-fold (p<0.05 within the first 6 h and then decreased to original values by 24 h. FGM were significantly elevated (p<0.05 between 72 and 96 h (RIA and between 48 and 120 h (EIA and there after decreased towards the pre-ACTH levels. Both assays detected a 2-fold increase in FGM 48 h post ACTH. Mean pre-ACTH and post- ACTH FGM amounts measured by RIA were 36 times (p<0.05 more than those measured by the EIA. For field application FGM were measure from three free-ranging Mountain gorilla individuals before and after chasing the

  6. Heavy oil recovery process: Conceptual engineering of a downhole methanator and preliminary estimate of facilities cost for application to North Slope Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Gondouin, M.

    1991-10-31

    The West Sak (Upper Cretaceous) sands, overlaying the Kuparuk field, would rank among the largest known oil fields in the US, but technical difficulties have so far prevented its commercial exploitation. Steam injection is the most successful and the most commonly-used method of heavy oil recovery, but its application to the West Sak presents major problems. Such difficulties may be overcome by using a novel approach, in which steam is generated downhole in a catalytic Methanator, from Syngas made at the surface from endothermic reactions (Table 1). The Methanator effluent, containing steam and soluble gases resulting from exothermic reactions (Table 1), is cyclically injected into the reservoir by means of a horizontal drainhole while hot produced fluids flow form a second drainhole into a central production tubing. The downhole reactor feed and BFW flow downward to two concentric tubings. The large-diameter casing required to house the downhole reactor assembly is filled above it with Arctic Pack mud, or crude oil, to further reduce heat leaks. A quantitative analysis of this production scheme for the West Sak required a preliminary engineering of the downhole and surface facilities and a tentative forecast of well production rates. The results, based on published information on the West Sak, have been used to estimate the cost of these facilities, per daily barrel of oil produced. A preliminary economic analysis and conclusions are presented together with an outline of future work. Economic and regulatory conditions which would make this approach viable are discussed. 28 figs.

  7. EIA's role in the analysis of the Clean Air Act Amendments of 1990 and the development of the National Allowance Database

    Energy Technology Data Exchange (ETDEWEB)

    Beamon, J.A.; Linders, M.J. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    Throughout 1990 the Energy Information Administration (EIA) provided continuous data and analytic support to Congress during its deliberations on Title IV of the Clean Air Act Amendments of 1990 (CAA). Congress requested the Energy Information Administration (EIA) to review and analyze the sections that would affect electric utilities, specifically those relating to acid deposition (Title IV). By providing knowledgeable and impartial analysis, EIA clarified the likely effects of the various legislative proposals and helped Congress finalize the amendments. Even though the CAA is now law, EIA's efforts have not ended. During the analysis of the various proposals, EIA and EPA created a National Allowance Database (NAD). Now, under an agreement with the Environmental Protection Agency (EPA), a new version of the NAD is being developed to facilitate the implementation of the acid deposition provisions of the CAA. This article describes the analyses undertaken, points out where EIA's efforts led to improved understanding of the likely impacts of the CAA, and outlines EIA's continued efforts to assist EPA in the implementation of the amendments. 6 tabs.

  8. Preliminary results of the ice_sheet_CCI round robin activity on the estimation of surface elevation changes

    DEFF Research Database (Denmark)

    Ticconi, F.; Fredenslund Levinsen, Joanna; Khvorostovsky, K.

    2013-01-01

    This work presents the first results of a research activity aiming to compare estimates of Surface Elevation Changes (SEC) over the Jakobshavn Isbræ basin (Greenland) using different repeat altimetry techniques and different sensors (laser vs. radar altimetry). The goal of this comparison is the ...

  9. Preliminary Findings of Serum Creatinine and Estimated Glomerular Filtration Rate (eGFR) in Adolescents with Intellectual Disabilities

    Science.gov (United States)

    Lin, Jin-Ding; Lin, Lan-Ping; Hsieh, Molly; Lin, Pei-Ying

    2010-01-01

    The present study aimed to describe the kidney function profile--serum creatinine and estimated glomerular filtration rate (eGFR), and to examine the relationships of predisposing factors to abnormal serum creatinine in people with intellectual disabilities (ID). Data were collected by a cross-sectional study of 827 aged 15-18 years adolescents…

  10. A quantitative real time polymerase chain reaction approach for estimating processed animal proteins in feed: preliminary data

    Directory of Open Access Journals (Sweden)

    Maria Cesarina Abete

    2013-04-01

    Full Text Available Lifting of the ban on the use of processed animal proteins (PAPs from non-ruminants in non-ruminant feed is in the wind, avoiding intraspecies recycling. Discrimination of species will be performed through polymerase chain reaction (PCR, which is at a moment a merely qualitative method. Nevertheless, quantification of PAPs in feed is needed. The aim of this study was to approach the quantitative determination of PAPs in feed through Real Time (RT-PCR technique; three different protocols picked up from the literature were tested. Three different kind of matrices were examined: pure animal meals (bovine, chicken and pork; one feed sample certified by the European reference laboratory on animal proteins (EURL AP in feed spiked with 0.1% bovine meal; and genomic DNAs from bovine, chicken and pork muscles. The limit of detection (LOD of the three protocols was set up. All the results obtained from the three protocols considered failed in the quantification process, most likely due to the uncertain copy numbers of the analytical targets chosen. This preliminary study will allow us to address further investigations, with the purpose of developing a RT-PCR quantitative method.

  11. Preliminary estimates of residence times and apparent ages of ground water in the Chesapeake Bay watershed, and water-quality data from a survey of springs

    Science.gov (United States)

    Focazio, Michael J.; Plummer, L. Neil; Bohlke, John K.; Busenberg, Eurybiades; Bachman, L. Joseph; Powars, David S.

    1998-01-01

    Knowledge of the residence times of the ground-water systems in Chesapeake Bay watershed helps resource managers anticipate potential delays between implementation of land-management practices and any improve-ments in river and estuary water quality. This report presents preliminary estimates of ground-water residence times and apparent ages of water in the shallow aquifers of the Chesapeake Bay watershed. A simple reservoir model, published data, and analyses of spring water were used to estimate residence times and apparent ages of ground-water discharge. Ranges of aquifer hydraulic characteristics throughout the Bay watershed were derived from published literature and were used to estimate ground-water residence times on the basis of a simple reservoir model. Simple combinations of rock type and physiographic province were used to delineate hydrogeomorphic regions (HGMR?s) for the study area. The HGMR?s are used to facilitate organization and display of the data and analyses. Illustrations depicting the relation of aquifer characteristics and associated residence times as a continuum for each HGMR were developed. In this way, the natural variation of aquifer characteristics can be seen graphically by use of data from selected representative studies. Water samples collected in September and November 1996, from 46 springs throughout the watershed were analyzed for chlorofluorocarbons (CFC?s) to estimate the apparent age of ground water. For comparison purposes, apparent ages of water from springs were calculated assuming piston flow. Additi-onal data are given to estimate apparent ages assuming an exponential distribution of ages in spring discharge. Additionally, results from previous studies of CFC-dating of ground water from other springs and wells in the watershed were compiled. The CFC data, and the data on major ions, nutrients, and nitrogen isotopes in the water collected from the 46 springs are included in this report. The apparent ages of water

  12. Preliminary estimates of dose and residual activation of selected components in ring collimation straight of the SNS

    Energy Technology Data Exchange (ETDEWEB)

    Ludewig, H.; Catalan-Lasheras, N.; Simos, N.; Walker, J.; Mallen, A.; Wei, J.; Todosow, M.

    2000-06-30

    The highest doses to components in the SNS ring are expected to be to those located in the collimation straight section. In this paper the authors present estimated doses to magnets and cable located between collimators. In addition the buildup of relatively long half-life radioactive isotopes is estimated, following machine operation and shutdown. Finally, the potential dose to operators approaching the machine following operation and shutdown for four hours is made. The results indicate that selected components might require replacement after several years of full power operation. In addition, the reflection of gamma-rays from the tunnel walls contribute a non-negligible amount to the dose of an operator in the tunnel following machine shutdown.

  13. Empirical Analysis of the Typical Breeding Pattern of Clam in Hongdao Town and the Preliminary Estimates of Costs and Benefits

    Institute of Scientific and Technical Information of China (English)

    Xijuan; YANG; Shijun; ZHANG

    2014-01-01

    Based on the survey data about clam breeding farmers in Hongdao Town in August 2011,this paper analyzes the production and operation of typical clam breeding pattern,and estimates the costs and benefits. Through the analysis of operation conditions and economic conditions of Hongdao clam breeding,this paper aims to explore a more reasonable and effective breeding pattern so as to reduce breeding costs and market risks,and increase breeding farmers’ income.

  14. Motor unit loss estimation by the multipoint incremental MUNE method in children with spinal muscular atrophy--a preliminary study.

    Science.gov (United States)

    Gawel, Malgorzata; Kostera-Pruszczyk, Anna; Lusakowska, Anna; Jedrzejowska, Maria; Ryniewicz, Barbara; Lipowska, Marta; Gawel, Damian; Kaminska, Anna

    2015-03-01

    Quantitative EMG reflects denervation of muscles after lower motor neuron degeneration in spinal muscular atrophy (SMA) but does not reflect actual motor unit loss. The aim of our study was to assess the value of the multipoint incremental motor unit number estimation (MUNE) method in the modification by Shefner in estimating motor unit loss in SMA. The number of motor units, the mean amplitude of an average surface-detected single motor unit potential (SMUP), and the amplitude of compound motor action potentials (CMAP) were estimated in 14 children with SMA in the abductor pollicis brevis (ABP). Significant differences in MUNE values and SMUP and CMAP amplitude were found between the SMA and control groups (P < 0.0001). MUNE values correlated with Hammersmith Functional Motor Scale (HFMS) scores (P < 0.05). Increased SMUP amplitude values correlated with decreased HFMS scores (P < 0.05). The study confirms that MUNE method in the modification by Shefner is a useful tool reflecting motor unit loss in SMA, and it is easy to perform and well tolerated. MUNE and SMUP amplitude seemed to be sensitive parameters reflecting motor dysfunction in SMA but a longitudinal study in a larger number of subjects is needed.

  15. Age estimation by pulp-to-tooth area ratio using cone-beam computed tomography: A preliminary analysis

    Science.gov (United States)

    Rai, Arpita; Acharya, Ashith B.; Naikmasur, Venkatesh G.

    2016-01-01

    Background: Age estimation of living or deceased individuals is an important aspect of forensic sciences. Conventionally, pulp-to-tooth area ratio (PTR) measured from periapical radiographs have been utilized as a nondestructive method of age estimation. Cone-beam computed tomography (CBCT) is a new method to acquire three-dimensional images of the teeth in living individuals. Aims: The present study investigated age estimation based on PTR of the maxillary canines measured in three planes obtained from CBCT image data. Settings and Design: Sixty subjects aged 20–85 years were included in the study. Materials and Methods: For each tooth, mid-sagittal, mid-coronal, and three axial sections—cementoenamel junction (CEJ), one-fourth root level from CEJ, and mid-root—were assessed. PTR was calculated using AutoCAD software after outlining the pulp and tooth. Statistical Analysis Used: All statistical analyses were performed using an SPSS 17.0 software program. Results and Conclusions: Linear regression analysis showed that only PTR in axial plane at CEJ had significant age correlation (r = 0.32; P < 0.05). This is probably because of clearer demarcation of pulp and tooth outline at this level. PMID:28123269

  16. Preliminary estimate of the amplification of possible earthquake ground motion at a site in Charleston County, South Carolina

    Science.gov (United States)

    Wheeler, Russell L.; Cramer, Chris H.

    2000-01-01

    We estimate site amplification at the location of a proposed bridge near Charleston, South Carolina. Model calculations indicate that amplification at periods of 1 s and longer is likely to be strongly influenced by the effects of a large contrast in shear-wave velocity at a depth of approximately 1 km (3,000 ft). On-site borehole data, regional geological and geophysical information, and data from a geologically similar setting near Memphis, Tennessee allowed us to estimate profiles of shear-wave velocity, shear-wave attenuation, and density from ground level down to metamorphic and igneous rocks that are approximately 3 km (9,500 ft) beneath the site. We modeled amplifications that would be produced at the surface and at the top and bottom of the Cooper Marl. Amplification estimates that are based only on the shallow shear-wave structure, for example in the upper 100 m (300 ft), can severely underestimate long-period amplification at the site. Additional modeling could help determine whether new data should be collected, to resolve remaining uncertainties about likely amplification.

  17. [Serological and clinical proof of freedom from Equine Infectious Anemia (EIA) in imported and domestic horses in Switzerland].

    Science.gov (United States)

    Kaiser, A; Meier, H P; Doherr, M G; Perler, L; Zanoni, R; Gerber, V

    2009-04-01

    Since 1991, no cases of Equine Infectious Anemia (EIA) have been reported in Switzerland. Risk factors for introduction of the virus into Switzerland are still present or have even increased as frequent inapparent infections, large numbers of imported horses, (since 2003) absence of compulsory testing prior to importation, EIA cases in surrounding Europe, possible illegal importation of horses, frequent short-term stays, poor knowledge of the disease among horse owners and even veterinarians. The aim of this study was to provide evidence of freedom from EIA in imported and domestic horses in Switzerland. The serum samples from 434 horses imported since 2003 as well as from 232 domestic horses fifteen years of age or older (since older horses have naturally had a longer time of being exposed to the risk of infection) were analysed using a commercially available ELISA test. All samples were seronegative, indicating that the maximum possible prevalence that could have been missed with this sample was 0.5% (95% confidence).

  18. El papel del geógrafo en los Estudios de Impacto Ambiental (EIA

    Directory of Open Access Journals (Sweden)

    Freddy A. Aponte P.

    2005-01-01

    Full Text Available La geografía es la ciencia que trata de describir, relacionar y explicar aquellas cosas, tanto naturales como culturales, que diferencian los lugares sobre la superficie terrestre (Boadas, 1970. El objeto de estudio de esta ciencia lo constituye el espacio organizado o estructurado por los grupos humanos. Entre el medio y el hombre se establece toda una serie de relaciones que se manifiestan en una síntesis: el espacio geográfico, el cual estará orientado por el hombre y en función del hombre, es decir, la mayoría de las actividades que se dan en ese espacio son de la competencia de los geógrafos. Los estudios de impacto ambiental están orientados a predecir y evaluar los efectos del desarrollo de una actividad sobre los componentes del ambiente natural y social y proponer las correspondientes medidas preventivas, mitigantes y correctivas, a los fines de verificar el cumplimiento de las disposiciones ambientales contenidas en la normativa legal vigente en el país y a determinar los parámetros ambientales que conforme a la misma deban establecerse para cada proyecto con incidencia sobre los elementos del espacio (MARN, 1997. Por la estructura presentada en los manuales para elaboración de los de EIA, la participación de los geógrafos está por el orden del 50%, es decir, se integra desde el mismo inicio del estudio, seleccionando la cartografía base, escala, área de influencia directa e indirecta del proyecto, determinación de poligonales, evaluando los aspectos físicos naturales y socioeconómicos.

  19. Preliminary estimation of infantile exposure to BPA based on the standard quality of baby bottles distributed in Isfahan urban society

    Directory of Open Access Journals (Sweden)

    Zohreh Abdi Moghadam

    2013-01-01

    Full Text Available Aims: This study was aimed to estimate the bisphenol A (BPA intake from baby bottles, considering the diversity and the standard quality of the baby bottles distributed in an Isfahan urban society. Materials and Methods: A cross-sectional study was performed in Isfahan in 2011. Baby shops ( n = 33 and drug stores ( n = 7 in four district areas were included in the study. The distribution of baby bottles was investigated regarding their brand, origin, and being labeled "BPA free." Estimation of exposure to BPA from baby bottles was made based on the national and international representative data. Results: The products marked as "BPA free" were found among the western products and limited to two of the selected areas. No "BPA free" marked baby bottle was distinguished among the Iranian made products. Of the 8% exclusively formula-fed infants, 90% may be the high consumers of BPA from polycarbonate baby bottles, with an intake of 1.5-2 μg/kg b.w./day for the moderate and 7.5-10 μg/kg b.w./day in case of worse condition. Conclusion: Considering the current globally accepted threshold daily intake (TDI for BPA, primary exposure estimation is that feeding using non-BPA-free baby bottles is not a serious health concern in Iran. Thought that threshold level of TDI is discussed to be reduced in future, improvement and revision of the national standards can be effective in reducing the exposure to BPA in Iranian infants so as to provide large margin of safety for them.

  20. UWM-HBUT at TREC 2014 Microblog Track: Using Query Expansion (QE) and Event Identification Algorithm (EIA) to Improve Microblog Retrieval Effectiveness

    Science.gov (United States)

    2014-11-01

    Algorithm (EIA). In addition, we also evaluate the Query Expansion (QE) approach using Google as an external data corpus. There are 55 search topics and...messages, QE is used to enrich a user query. This *Wei Huang is the corresponding author and also a visiting scholar of University of Wisconsin...stamp is to the event using Event Identification Algorithm (EIA). In addition, we also evaluate the Query Expansion (QE) approach using Google as an

  1. The Spacecraft Materials Selector: An Artificial Intelligence System for Preliminary Design Trade Studies, Materials Assessments, and Estimates of Environments Present

    Science.gov (United States)

    Pippin, H. G.; Woll, S. L. B.

    2000-01-01

    Institutions need ways to retain valuable information even as experienced individuals leave an organization. Modern electronic systems have enough capacity to retain large quantities of information that can mitigate the loss of experience. Performance information for long-term space applications is relatively scarce and specific information (typically held by a few individuals within a single project) is often rather narrowly distributed. Spacecraft operate under severe conditions and the consequences of hardware and/or system failures, in terms of cost, loss of information, and time required to replace the loss, are extreme. These risk factors place a premium on appropriate choice of materials and components for space applications. An expert system is a very cost-effective method for sharing valuable and scarce information about spacecraft performance. Boeing has an artificial intelligence software package, called the Boeing Expert System Tool (BEST), to construct and operate knowledge bases to selectively recall and distribute information about specific subjects. A specific knowledge base to evaluate the on-orbit performance of selected materials on spacecraft has been developed under contract to the NASA SEE program. The performance capabilities of the Spacecraft Materials Selector (SMS) knowledge base are described. The knowledge base is a backward-chaining, rule-based system. The user answers a sequence of questions, and the expert system provides estimates of optical and mechanical performance of selected materials under specific environmental conditions. The initial operating capability of the system will include data for Kapton, silverized Teflon, selected paints, silicone-based materials, and certain metals. For situations where a mission profile (launch date, orbital parameters, mission duration, spacecraft orientation) is not precisely defined, the knowledge base still attempts to provide qualitative observations about materials performance and likely

  2. Relationship between ionospheric F2-layer critical frequency, F10.7, and F10.7P around African EIA trough

    Science.gov (United States)

    Ikubanni, S. O.; Adeniyi, J. O.

    2017-02-01

    Improved ionospheric modeling requires a better understanding of the relationship between ionospheric parameters and their influencing solar and geomagnetic sources. Published reports of the validation of the International Reference Ionosphere (IRI) for quiet-time revealed either underestimation or overestimation at a greater magnitude during high solar fluxes, especially at low latitude. With daily foF2 data from Ouagadougou (geor. 12.4°N, 1.5°W) covering a solar cycle, we have presented preliminary results from the analysis of solar dependence of six different classifications of the data: (i) daily values, (ii) monthly mean, (iii) daily quiet values (with Ap ⩽ 20), (iv) monthly-quiet-mean values, (v) monthly median, and (vi) monthly-quiet-median values. All six classifications show good nonlinear relationship with both F10.7 and F10.7P, however, the differences between the dependence of classes (i) and (iii) of foF2 on the two solar indices is more substantial than those of classes (ii), (iv), (v), and (vi). Of all the six classes, the monthly averages are best related to both solar activity indices. Further analysis shows that magnetic disturbances are non-influential in the variations of the monthly mean of both solar activity indices; this makes both good indices for quiet-time modeling. Likewise, F10.7 and F10.7P are indistinguishable for long-term modeling around the African EIA trough region. While monthly median values may be best for mid-latitude region, either the mean/median values could be used for low-latitude region. However, it could be worthwhile to examine the distribution of the data from the station under consideration.

  3. Some preliminary results of a worldwide seismicity estimation: a case study of seismic hazard evaluation in South America

    Directory of Open Access Journals (Sweden)

    C. V. Christova

    2000-06-01

    Full Text Available Global data have been widely used for seismicity and seismic hazard assessment by seismologists. In the present study we evaluate worldwide seismicity in terms of maps of maximum observed magnitude (Mmax, seismic moment (M 0 and seismic moment rate (M 0S. The data set used consists of a complete and homogeneous global catalogue of shallow (h £ 60 km earthquakes of magnitude MS ³ 5.5 for the time period 1894-1992. In order to construct maps of seismicity and seismic hazard the parameters a and b derived from the magnitude-frequency relationship were estimated by both: a the least squares, and b the maximum likelihood, methods. The values of a and b were determined considering circles centered at each grid point 1° (of a mesh 1° ´1° and of varying radius, which starts from 30 km and moves with a step of 10 km. Only a and b values which fulfill some predefined conditions were considered in the further procedure for evaluating the seismic hazard maps. The obtained worldwide M max distribution in general delineates the contours of the plate boundaries. The highest values of M max observed are along the circum-Pacific belt and in the Himalayan area. The subduction plate boundaries are characterized by the largest amount of M 0 , while areas of continental collision are next. The highest values of seismic moment rate (per 1 year and per equal area of 10 000 km 2 are found in the Southern Himalayas. The western coasts of U.S.A., Northwestern Canada and Alaska, the Indian Ocean and the eastern rift of Africa are characterized by high values of M 0 , while most of the Pacific subduction zones have lower values of seismic moment rate. Finally we analyzed the seismic hazard in South America comparing the predicted by the NUVEL1 model convergence slip rate between Nazca and South America plates with the average slip rate due to earthquakes. This consideration allows for distinguishing between zones of high and low coupling along the studied convergence

  4. PRELIMINARY METHODOLOGICAL PROPOSAL FOR ESTIMATING ENVIRONMENTAL FLOWS IN PROJECTS APPROVED BY THE MINISTRY OF ENVIRONMENT AND SUSTAINABLE DEVELOPMENT (MADS, COLOMBIA

    Directory of Open Access Journals (Sweden)

    Gabriel A. Pinilla Agudelo

    2013-09-01

    Full Text Available ABSTRACT A methodological proposal for estimating environmental flows in large projects approved by Agencia Nacional de Licencias Ambientales (ANLA in Colombian rivers was developed. The project is the result of an agreement between the MADS and the Universidad Nacional de Colombia, Bogotá (UNC. The proposed method begins with an evaluation of hydrological criteria,continues with a hydraulic and water quality validation, and follows with the determination of habitat integrity. This is an iterative process that compares conditions before and after the project construction and allows to obtain the magnitude of a monthly flow that, besides preserving the ecological functions of the river, guarantees the water uses downstream. Regarding to the biotic component, the proposal includes the establishment and monitoring of biotic integrity indices for four aquatic communities (periphyton, macroinvertebrates, riparian vegetation, and fish. The effects that flow reduction may produce in the medium and long term can be assessed by these indices. We present the results of applying the methodology to several projects licensed by the MADS. RESUMEN Se presenta una propuesta metodológica para estimar los caudales ambientales en grandes proyectos licenciados por la Agencia Nacional de Licencias Ambientales (ANLA de Colombia, resultado de un convenio interadministrativo suscrito entre el ahora Ministerio de Ambiente y Desarrollo Sostenible (MADS de Colombia y la Universidad Nacional de Colombia, Bogotá (UNC. El método propuesto parte de garantizar criterios hidrológicos, continúa con una validación hidráulica y de calidad del agua, sigue con la determinación de la integridad del hábitat, en un proceso iterativo que requiere evaluación para las condiciones antes y después de la construcción del proyecto y que permite establecer un caudal que, además de conservar las funciones ecológicas del río, garantiza los usos del recurso aguas abajo. Espec

  5. Preliminary estimates of the quantities of rare-earth elements contained in selected products and in imports of semimanufactured products to the United States, 2010

    Science.gov (United States)

    Bleiwas, Donald I.; Gambogi, Joseph

    2013-01-01

    Rare-earth elements (REEs) are contained in a wide range of products of economic and strategic importance to the Nation. The REEs may or may not represent a significant component of that product by mass, value, or volume; however, in many cases, the embedded REEs are critical for the device’s function. Domestic sources of primary supply and the manufacturing facilities to produce products are inadequate to meet U.S. requirements; therefore, a significant percentage of the supply of REEs and the products that contain them are imported to the United States. In 2011, mines in China produced roughly 97 percent of the world’s supply of REEs, and the country’s production of these elements will likely dominate global supply until at least 2020. Preliminary estimates of the types and amount of rare-earth elements, reported as oxides, in semimanufactured form and the amounts used for electric vehicle batteries, catalytic converters, computers, and other applications were developed to provide a perspective on the Nation’s use of these elements. The amount of rare-earth metals recovered from recycling, remanufacturing, and reuse is negligible when the tonnage of products that contain REEs deposited in landfills and retained in storage is considered. Under favorable market conditions, the recovery of REEs from obsolete products could potentially displace a portion of the supply from primary sources.

  6. PRELIMINARY ESTIMATE OF CO2 STORAGE CAPACITY BY PETROPHYSICAL MODELLING IN UPPER MIOCENE POLJANA SANDSTONES IN THE WESTERN PART OF THE SAVA DEPRESSION

    Directory of Open Access Journals (Sweden)

    Marija Podbojec

    2016-02-01

    Full Text Available A preliminary assessment of the capacity of regional geological storage in the western part of the Sava Depression was based on data obtained from several deep exploration wells. The Poljana Sandstones represent a regional deep sandstone body, in most parts saturated with water, with promising underground facilities for the storage of CO₂ in the study area. Poljana Sandstones (member of Kloštar-Ivanić Formation bounded between E-log markers Rνand Z' have favourable petrophysical properties and are situated at reasonable depths. According to previous investigations, at depths greater than 800 meters supercritical conditions of temperature and pressure CO₂ are achieved, which ensures easy and safe injection into storage underground facilities. For the creation of a model in Petrel software, various data was used, including the distribution of CO₂ density, porosity, effective thickness and the relative depth of sandstone. Spatial distribution of porosity was made regarding neutron porosity logs. The most important parameter in the estimate of storage capacity is effective thickness, defined by the interval between E–log markers Rν and Z’. Hence, the effective thickness was used for top and bottom surface of sandstones. Density of CO₂ was created according to their spatial distribution regarding the depth and the temperature. The capacity of CO2 storage was calculated by the volumetric method. The use of a calculated Petrel model can subsequently determine the amount of CO₂ storage in the underground facilities of the study area.

  7. COMPARATIVE DETECTION OF MEASLES SPECIFIC IGM ANTIBODY IN SERUM AND SALIVA BY AN ANTIBODY-CAPTURE IGM ENZYME IMMUNOASSAY (EIA)

    OpenAIRE

    Talat Mokhtari Azad; Anahid Ehteda; Parvin Yavari; R Hamkar; Zahra Safar Pour; M. Essalat Rakhsheh Nategh

    2003-01-01

    Laboratory diagnosis of acute measles is usually achieved by serology assays for measle-specific IgM antibody. For comparison of measle-specific IgM antibody in saliva and serum, 95 paired blood and saliva samples were collected 1-14 days after the onset of rash. The specimens were tested for specific IgM antibody by an IgM antibody-capture Enzyme Immunoassay (EIA). Measles IgM antibody was detected in 89 (93.7%) of serum samples and in 85(89.5%) of saliva specimens. Of the 6(6.3%) serum samp...

  8. Establishing cytogenetic biodosimetry laboratory in Saudi Arabia and producing preliminary calibration curve of dicentric chromosomes as biomarker for medical dose estimation in response to radiation emergencies.

    Science.gov (United States)

    Al-Hadyan, Khaled; Elewisy, Sara; Moftah, Belal; Shoukri, Mohamed; Alzahrany, Awad; Alsbeih, Ghazi

    2014-12-01

    In cases of public or occupational radiation overexposure and eventual radiological accidents, it is important to provide dose assessment, medical triage, diagnoses and treatment to victims. Cytogenetic bio-dosimetry based on scoring of dicentric chromosomal aberrations assay (DCA) is the "gold standard" biotechnology technique for estimating medically relevant radiation doses. Under the auspices of the National Science, Technology and Innovation Plan in Saudi Arabia, we have set up a biodosimetry laboratory and produced a national standard dose-response calibration curve for DCA, pre-required to estimate the doses received. For this, the basic cytogenetic DCA technique needed to be established. Peripheral blood lymphocytes were collected from four healthy volunteers and irradiated with radiation doses between 0 and 5 Gy of 320 keV X-rays. Then, lymphocytes were PHA stimulated, Colcemid division arrested and stained cytogenetic slides were prepared. The Metafer4 system (MetaSystem) was used for automatic and manually assisted metaphase finding and scoring of dicentric chromosomes. Results were fit to the linear-quadratic dose-effect model according to the IAEA EPR-Biodosimetry-2011 report. The resulting manually assisted dose-response calibration curve (Y = 0.0017 + 0.026 × D + 0.081 × D(2)) was in the range of those described in other populations. Although the automated scoring over-and-under estimates DCA at low (2 Gy) doses, respectively, it showed potential for use in triage mode to segregate between victims with potential risk to develop acute radiotoxicity syndromes. In conclusion, we have successfully established the first biodosimetry laboratory in the region and have produced a preliminary national dose-response calibration curve. The laboratory can now contribute to the national preparedness plan in response to eventual radiation emergencies in addition to providing information for decision makers and public health officials who assess the

  9. Power and polarization dependences of ultra-narrow electromagnetically induced absorption (EIA) spectra of 85 Rb atoms in degenerate two-level system

    Science.gov (United States)

    Qureshi, Muhammad Mohsin; Rehman, Hafeez Ur; Noh, Heung-Ryoul; Kim, Jin-Tae

    2016-05-01

    We have investigated ultra-narrow EIA spectral features with respect to variations of polarizations and powers of pump laser beam in a degenerate two-level system of the transition of 85 Rb D2 transition line. Polarizations of the probe laser beam in two separate experiments were fixed at right circular and horizontal linear polarizations, respectively while the polarizations of the pump lasers were varied from initial polarizations same as the probe laser beams to orthogonal to probe polarizations. One homemade laser combined with AOMs was used to the pump and probe laser beams instead of two different lasers to overcome broad linewidths of the homemade lasers. Theoretically, probe absorption coefficients have been calculated from optical Bloch equations of the degenerate two level system prepared by a pump laser beam. In the case of the circular polarization, EIA signal was obtained as expected theoretically although both pump and probe beams have same polarization. The EIA signal become smaller as power increases and polarizations of the pump and probe beams were same. When the polarization of the pump beam was linear polarization, maximum EIA signal was obtained theoretically and experimentally. Experimental EIA spectral shapes with respect to variations of the pump beam polarization shows similar trends as the theoretical results.

  10. A análise dos impactos socioeconômicos na estruturação do EIA/RIMA: a importância da Abordagem Humanista para a Sustentabilidade The analysis of socio-economic impacts on the structure of EIA / RIMA: the importance of humanist approach to sustainability

    Directory of Open Access Journals (Sweden)

    Leandro Carlos Dias Conde

    2013-03-01

    Full Text Available DOI: 10.5902/198346597686O presente trabalho trata da defesa da abordagem humanista na estruturação da análise de Impacto Ambiental (EIA e do seu Relatório de Impacto Ambiental (RIMA, no que concerne aos impactos socioeconômicos abordados, por compreender que a abordagem convencional não dá conta das demandas sociais, pois somente esta nova abordagem dará, de fato, o caráter sustentável da EIA/RIMA. The present work deals with the defense of the humanistic approach in structuring the analysis of Environmental Impact Assessment (EIA and its Environmental Impact Report (RIMA in relation to socioeconomic impacts addressed to realize that the conventional approach does not account social demands, as only this new approach will in fact the sustainable nature of the EIA / RIMA.

  11. Estimates of US biomass energy consumption 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-06

    This report is the seventh in a series of publications developed by the Energy Information Administration (EIA) to quantify the biomass-derived primary energy used by the US economy. It presents estimates of 1991 and 1992 consumption. The objective of this report is to provide updated estimates of biomass energy consumption for use by Congress, Federal and State agencies, biomass producers and end-use sectors, and the public at large.

  12. Iatrogenic injuries of the common femoral artery (CFA) and external iliac artery (EIA) during endograft placement: an underdiagnosed entity.

    Science.gov (United States)

    Hingorani, Anil P; Ascher, Enrico; Marks, Natalie; Shiferson, Alexander; Patel, Nirav; Gopal, Kapil; Jacob, Theresa

    2009-09-01

    Early limb occlusions following endovascular treatment of aorto-iliac aneurysmal disease is not uncommon (4%-13%). To assess whether the femoral artery entry site could potentially cause this complication, we prospectively evaluated the ipsilateral common femoral artery (CFA) and distal external iliac artery (EIA) with intraoperative duplex scans (IDS). There were 134 patients with infrarenal nonruptured abdominal aorto-iliac aneurysms treated with endografts since 2002 at our institution. Age ranged from 65 to 89 years (mean: 77 +/- 7 years). Aneuryx (n = 41), Zenith (n = 50), and Excluder (n = 43) endografts were used for repair. All procedures were performed via open exposure of the CFA. Introducer diameter varied from 12 mm to 22 mm. All patients underwent IDS of the CFA and distal EIA after repair of the arteriotomies. In 34 patients (25%), we documented intimal dissections causing severe (>70%) stenoses. Of the 271 arteries that were examined, 38 (14%) had abnormal findings that demanded intervention. These were repaired with flap excision, tacking sutures revision, or patch angioplasty (n = 36). Repeat IDS confirmed the adequacy of the repair. No statistical difference was noted if the site of larger introducer sheath and the incidence of flap formation. In addition, 10 small flaps or plaques were visualized but did not create significant stenosis. No differences were noted in the incidence of positive duplex exams between each type graft (P = .4). No early or late iliac limb occlusions were noted. Follow-up of 94% was obtained. Completion arterial duplex scans are helpful in detecting a substantial number of clinically unsuspected technical defects caused by introducer sheaths. Timely diagnosis and repair of these defects may decrease the incidence of early limb occlusion following endograft placement.

  13. Relation of Environmental Impact Assessment (EIA and Strategic Environmental Assessment (SEA and the Importance of Strategic Environmental Assessment in Landscape Planning Process

    Directory of Open Access Journals (Sweden)

    Gizem CENGİZ GÖKÇE

    2015-07-01

    Full Text Available The main goal in the countries which have not completed their development progress is industrialization and development just as soon as possible. Therefore, negative effects of industrialization and development on envi ronment and/or nature cannot be mostly discussed adequately. One of the planning approach instruments that targets sustainability, Environmental Impact Assessment (EIA is used in many countries effectively. But in recent years, that has understood; EIA is an impact assessment instrument that contains defensive preventions only on the basis of projects and this situation has caused some concerns against EIA. In this direction, Strategical Environmental Assessment (SEA exists as the final point of the instruments which are formed to provide sustainable development . In this study; the importance and the requirement of effectively taking a role of landscape architectures that have ecological based job, in the SEA workings which isn’t have got a legal status in Turkey yet, are emphasized by reviewing the relations between EIA and SEA concepts.

  14. The interplay between research, research-based advice and the development of the Greenlandic Governmental environmental legislation and practices in respect to EIA and SEA

    DEFF Research Database (Denmark)

    Mosbech, Anders

    Government decides to grant licensees for oil exploration the operators have to develop specific EIAs for all major activities. The activities shall be based on BEP (Best Environmental Practice) and BAT (Best Environmental Technology) principles, and operators shall conduct supplementary environmental...

  15. CLIA(抗-HCV)联合EIA(HCV-cAg)在HCV感染初筛试验中的意义

    Institute of Scientific and Technical Information of China (English)

    黄建梅

    2016-01-01

    目的 分析CLIA(抗-HCV)联合EIA(HCV-cAg)在HCV感染初筛试验中的意义.方法 选取56例住院患者,检测丙肝抗体和丙肝核心抗原,对HCV感染初筛阳性患者均采取抗-HCV和HCV-cAg检测.结果 CLIA和EIA检测阳性患者ALI水平大于40 U/L,阳性率差异不明显,P>0.05,抗-HCV/CLIA(+)+HCV-cAg(-)阳性率(98.1%)显著高于抗HCV/EIA(+)+HCV-cAg(-)(94.7%),P<0.05,HCV/CLIA(+)+HCV-cAg(+)阳性患者CLIA阳性率(98.6%)显著高于EIA(85.7%),P<0.05.结论 在HCV感染初筛试验中,CLIA(抗-HCV)联合EIA(HCV-cAg)检出率高,阳性符合率更高.

  16. EIA model documentation: Documentation of the Oil and Gas Supply Module (OGSM)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The purpose of this report is to define the objectives of the Oil and Gas Supply Model (OGSM), to describe the model`s basic approach, and to provide detail on how the model works. This report is intended as a reference document for model analysts, users, and the public. Projected production estimates of US crude oil and natural gas are based on supply functions generated endogenously within National Energy Modeling System (NEMS) by the OGSM. OGSM encompasses domestic crude oil and natural gas supply by both conventional and nonconventional recovery techniques. Nonconventional recovery includes enhanced oil recovery (EOR), and unconventional gas recovery (UGR) from tight gas formations, Devonian shale and coalbeds. Crude oil and natural gas projects are further disaggregated by geographic region. OGSM projects US domestic oil and gas supply for six Lower 48 onshore regions, three offshore regions, and Alaska. The general methodology relies on forecasted drilling expenditures and average drilling costs to determine exploratory and developmental drilling levels for each region and fuel type. These projected drilling levels translate into reserve additions, as well as a modification of the production capacity for each region. OGSM also represents foreign trade in natural gas, imports and exports by entry region.

  17. Evaluation of Iranian Leopold Matrix application in the Environmental Impact Assessment (EIA of solid waste management options in Birjand city

    Directory of Open Access Journals (Sweden)

    S Valizadeh

    2015-08-01

    Full Text Available Background and Objective: Significant increase in population and as a result, the production of excessive waste has recently made attention to municipal solid waste management a necessary issue. The objective of this study was to use matrix-based EIA process in order to determine best waste management option in Birjand City and to suggest appropriate solutions to managers and planners of this city. Materials and Methods: Assessing the environmental impacts of waste management options was done using Iranian Leopold Matrix. Through this method, the environmental impacts of waste management options were determined in the Birjand City. The options were Open dumping, Recycling, Composting, and Sanitary damping. Results: The results indicated that Open dumping with a final score of -3.06 had the highest environmental impact and was introduced as the fourth preference. In addition, composting with final score of -2.34 has the lowest environmental impact compared with other options. Conclusion: About 76.95% of the composition of municipal solid waste of Birjand City is household waste; therefore, putrescible organic materials are the predominant waste. Thus, according to the results of the Iranian Leopold matrix method, composting option was introduced as the first priority and the most logical option for waste management in the Birjand City.

  18. Evaluation of the long-term energy analysis program used for the 1978 EIA Administrator's Report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    Peelle, R. W.; Weisbin, C. R.; Alsmiller, Jr., R. G.

    1981-10-01

    An evaluation of the Long-Term Energy Analysis Program (LEAP), a computer model of the energy portion of the US economy that was used for the 1995-2020 projections in its 1978 Annual Report to Congress, is presented. An overview of the 1978 version, LEAP Model 22C, is followed by an analysis of the important results needed by its users. The model is then evaluated on the basis of: (1) the adequacy of its documentation; (2) the local experience in operating the model; (3) the adequacy of the numerical techniques used; (4) the soundness of the economic and technical foundations of the model equations; and (5) the degree to which the computer program has been verified. To show which parameters strongly influence the results and to approach the question of whether the model can project important results with sufficient accuracy to support qualitative conclusions, the numerical sensitivities of some important results to model input parameters are described. The input data are categorized and discussed, and uncertainties are given for some parameters as examples. From this background and from the relation of LEAP to other available approaches for long-term energy modeling, an overall evaluation is given of the model's suitability for use by the EIA.

  19. Final disposal of spent nuclear fuel in Sweden. Some unresolved issues and challenges in the design and implementation of the forthcoming planning and EIA processes

    Energy Technology Data Exchange (ETDEWEB)

    Bjarnadottir, H.; Hilding-Rydevik, T. [Nordregio, Stockholm (Sweden)

    2001-06-01

    The aim of the study is to highlight some unresolved and challenging issues in the forthcoming approximately six year long Environmental Impact Assessment (EIA) and planning process of the long-term disposal of spent nuclear fuel in Sweden. Different international and Nordic experiences of the processes for final disposal as well as from other development of similar scope, where experiences assumed to be of importance for final disposal of nuclear waste, have been described. Furthermore, issues relating to 'good EIA practice' as well as certain aspects of planning theory have also been presented. The current Swedish situation for the planning and EIA process of the final disposal of spent nuclear fuel was also been summarized. These different 'knowledge areas' have been compared and measured against our perception of the expectations towards the forthcoming process, put forward by different Swedish actors in the field. The result is a presentation of a number of questions and identification issues that the authors consider need special attention in the design and conduction of the planning and EIA process. The study has been realized through a literature survey and followed by reading and analysis of the written material. The main focus of the literature search was on material describing planning processes, actor perspectives and EIA. Material and literature on the technical and scientific aspects of spent nuclear fuel disposal was however deliberately avoided. There is a wealth of international and Swedish literature concerning final disposal of spent nuclear fuel - concerning both technical issues and issues concerning for example public participation and risk perception. But material of a more systematic and comparative nature (relating to both empirical and theoretical issues, and to practical experiences) in relation to EIA processes and communicative planning for final disposal of spent nuclear fuel seems to be more sparsely represented

  20. Estimation of the relative severity of floods in small ungauged catchments for preliminary observations on flash flood preparedness: a case study in Korea.

    Science.gov (United States)

    Kim, Eung Seok; Choi, Hyun Il

    2012-04-01

    An increase in the occurrence of sudden local flooding of great volume and short duration has caused significant danger and loss of life and property in Korea as well as many other parts of the World. Since such floods usually accompanied by rapid runoff and debris flow rise quite quickly with little or no advance warning to prevent flood damage, this study presents a new flash flood indexing methodology to promptly provide preliminary observations regarding emergency preparedness and response to flash flood disasters in small ungauged catchments. Flood runoff hydrographs are generated from a rainfall-runoff model for the annual maximum rainfall series of long-term observed data in the two selected small ungauged catchments. The relative flood severity factors quantifying characteristics of flood runoff hydrographs are standardized by the highest recorded maximum value, and then averaged to obtain the flash flood index only for flash flood events in each study catchment. It is expected that the regression equations between the proposed flash flood index and rainfall characteristics can provide the basis database of the preliminary information for forecasting the local flood severity in order to facilitate flash flood preparedness in small ungauged catchments.

  1. Evaluation and Comparison of Enzyme Immunoassay (Eia and Acid Fast Staining with Confirmation by Immunofluorescent Antibody Assay for Detection of Cryptosporidium Species in Infants and Young Children.

    Directory of Open Access Journals (Sweden)

    D Dorostcar Moghaddam

    2005-01-01

    Full Text Available Introduction: Cryptosporidiosis is prevalent world wide, causing a variety of problems ranging from acute, self-limiting diarrhea to fatal cases in immunocompromised persons, particulary those with acquired immunodeficiency (AIDS. Diagnosis of Cryptosporidium is made by identification of oocysts in stool specimens. The detection is most commonly made by the acid-fast staining method followed by microscopic examination which has low specificity and sensitivity. Material and Methods: In the present study, we evaluated diagnostic utility of a commercially available enzyme immunoassay (EIA, which detects Cryptosporidium-Specific antigen (CSA in 204 unprocessed stool specimens obtained from patients less than 3 years of age. Results: When compared with the routine screening procedure applied in this field study (screening by acid-fast staining and microscopy after concentration of positive results by IFA, both sensitivity and specificity were 98%. Of the 139 specimens negative by microscopy, 13 (9.3% were positive by EIA, 11 of which were confirmed by inhibition with antibody to Cryptosporidia-specific antigen. Conclusion: The EIA is an important tool for identifying Cryptosporidium in fecal specimens in field studies since it is sensitive, specific, simple to use and unaffected by the presence of a preservative.

  2. Preliminary analysis of construction investment estimation on petrochemical project%浅析石油化工项目建设投资估算

    Institute of Scientific and Technical Information of China (English)

    陈瑜芳

    2011-01-01

    石油化工项目的建设投资估算是项目前期工作的重要内容之一.在分析石油化工项目的特点、说明投资估算的重要性和范围的基础上,提出投资估算编制应注重资料搜集、制定投资估算原则、编制方法及确定工程量等环节.并分析说明了如何根据项目的具体情况,选取适当的估算方法完成项目投资估算.最终提出了投资估算中应注意的问题.%The construction investment estimation of petrochemical project is one of important work activities in the early stage of project. On the basis of analysis of the characteristics of petroleum refining and petrochemical engineering projects and the importance of investment estimation and its scope, the investment estimate preparation should focus on such steps as data collection, development of investment estimation method and principles and determination of bill of quantities, etc. An example is provided to illustrate how to select a proper estimation method to perform the investment estimate according to specific project conditions. The precautions in capital investment estimation are finally presented.

  3. Water budgets and groundwater volumes for abandoned underground mines in the Western Middle Anthracite Coalfield, Schuylkill, Columbia, and Northumberland Counties, Pennsylvania-Preliminary estimates with identification of data needs

    Science.gov (United States)

    Goode, Daniel J.; Cravotta, Charles A.; Hornberger, Roger J.; Hewitt, Michael A.; Hughes, Robert E.; Koury, Daniel J.; Eicholtz, Lee W.

    2011-01-01

    This report, prepared in cooperation with the Pennsylvania Department of Environmental Protection (PaDEP), the Eastern Pennsylvania Coalition for Abandoned Mine Reclamation, and the Dauphin County Conservation District, provides estimates of water budgets and groundwater volumes stored in abandoned underground mines in the Western Middle Anthracite Coalfield, which encompasses an area of 120 square miles in eastern Pennsylvania. The estimates are based on preliminary simulations using a groundwater-flow model and an associated geographic information system that integrates data on the mining features, hydrogeology, and streamflow in the study area. The Mahanoy and Shamokin Creek Basins were the focus of the study because these basins exhibit extensive hydrologic effects and water-quality degradation from the abandoned mines in their headwaters in the Western Middle Anthracite Coalfield. Proposed groundwater withdrawals from the flooded parts of the mines and stream-channel modifications in selected areas have the potential for altering the distribution of groundwater and the interaction between the groundwater and streams in the area. Preliminary three-dimensional, steady-state simulations of groundwater flow by the use of MODFLOW are presented to summarize information on the exchange of groundwater among adjacent mines and to help guide the management of ongoing data collection, reclamation activities, and water-use planning. The conceptual model includes high-permeability mine voids that are connected vertically and horizontally within multicolliery units (MCUs). MCUs were identified on the basis of mine maps, locations of mine discharges, and groundwater levels in the mines measured by PaDEP. The locations and integrity of mine barriers were determined from mine maps and groundwater levels. The permeability of intact barriers is low, reflecting the hydraulic characteristics of unmined host rock and coal. A steady-state model was calibrated to measured groundwater

  4. Using Compliance Analysis for PPP to bridge the gap between SEA and EIA: Lessons from the Turcot Interchange reconstruction in Montréal, Québec

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Undiné-Celeste, E-mail: undine_t@hotmail.com; Marsan, Jean-François, E-mail: jfmarsan@hotmail.com; Fournier-Peyresblanques, Bastien, E-mail: bastien.fp@gmail.com; Forgues, Chantal, E-mail: chantal_forgues@hotmail.com; Ogaa, Anita, E-mail: aogaa1@gmail.com; Jaeger, Jochen A.G., E-mail: jochen.jaeger@concordia.ca

    2013-09-15

    There is increasing concern about the disjunct between the intent of higher level government goals and actual projects “on the ground” in Canada. Although strategic environmental assessment (SEA) and a wide variety of plans, policies and programmes (PPP) contain and promote goals that envision a movement towards social, economic and environmental sustainability, these goals are not necessarily upheld by large-scale projects and their environmental impact assessments (EIAs). This disconnect is often illustrated through anecdotal observations. However, to be able to overcome this disjunct it is imperative to come to a clearer understanding of the degree of sustainability or unsustainability of large-scale developments and the way in which they “measure up” in terms of the goals when compared to alternative options. This article proposes a Compliance Analysis method for investigating the level of harmonization between SEA, PPP and proposed projects and their possible alternatives (CAPPP). This method is quantified through a Likert scale which allows for comparison of alternatives for decision making and analytical purposes. The 2009 proposal for the Turcot Exchange redevelopment in Montréal, Québec, put forward by the Ministry of Transport of Québec (MTQ), as well as two alternative proposals, were utilized as a case study to clearly demonstrate the CAPPP methodology and its applicability. The approved plan for the Turcot redevelopment proposed by MTQ was found to be in poor compliance with the majority of the 178 goals in the six sectors that were examined (air quality, climate change, health, noise, socioeconomic, transport), while alternative proposals were found to be in greater accordance with the intentions of governmental SEA and PPP. Synthesis and applications: The CAPPP methodology is a versatile “watchdog” tool for the examination of the level of compliance between stated goals for regions, industrial sectors, or governments and the EIAs of

  5. Final disposal of spent nuclear fuel in Sweden. Some unresolved issues and challenges in the design and implementation of the forthcoming planning and EIA processes

    Energy Technology Data Exchange (ETDEWEB)

    Bjarnadottir, H.; Hilding-Rydevik, T. [Nordregio, Stockholm (Sweden)

    2001-06-01

    The aim of the study is to highlight some unresolved and challenging issues in the forthcoming approximately six year long Environmental Impact Assessment (EIA) and planning process of the long-term disposal of spent nuclear fuel in Sweden. Different international and Nordic experiences of the processes for final disposal as well as from other development of similar scope, where experiences assumed to be of importance for final disposal of nuclear waste, have been described. Furthermore, issues relating to 'good EIA practice' as well as certain aspects of planning theory have also been presented. The current Swedish situation for the planning and EIA process of the final disposal of spent nuclear fuel was also been summarized. These different 'knowledge areas' have been compared and measured against our perception of the expectations towards the forthcoming process, put forward by different Swedish actors in the field. The result is a presentation of a number of questions and identification issues that the authors consider need special attention in the design and conduction of the planning and EIA process. The study has been realized through a literature survey and followed by reading and analysis of the written material. The main focus of the literature search was on material describing planning processes, actor perspectives and EIA. Material and literature on the technical and scientific aspects of spent nuclear fuel disposal was however deliberately avoided. There is a wealth of international and Swedish literature concerning final disposal of spent nuclear fuel - concerning both technical issues and issues concerning for example public participation and risk perception. But material of a more systematic and comparative nature (relating to both empirical and theoretical issues, and to practical experiences) in relation to EIA processes and communicative planning for final disposal of spent nuclear fuel seems to be more sparsely represented

  6. EIA new releases

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report was prepared by the Energy Information Administration. It contains news releases on items of interest to the petroleum, coal, nuclear, electric and alternate fuels industries ranging from economic outlooks to environmental concerns. There is also a listing of reports by industry and an energy education resource listing containing sources for free or low-cost energy-related educational materials for educators and primary and secondary students.

  7. A preliminary estimation of the reproduction ratio for new influenza A(H1N1) from the outbreak in Mexico, March-April 2009.

    Science.gov (United States)

    Boëlle, P Y; Bernillon, P; Desenclos, J C

    2009-05-14

    As of 12 May 2009, 5,251 cases of the new influenza A(H1N1) have been officially reported to the World Health Organization (WHO) from 30 countries, with most of the identified cases exported from Mexico where a local epidemic has been going on for the last two months. Sustained human-to-human transmission is necessary to trigger influenza pandemic and estimating the reproduction ratio (average number of secondary cases per primary case) is necessary for forecasting the spread of infection. We use two methods to estimate the reproduction ratio from the epidemic curve in Mexico using three plausible generation intervals (the time between primary and secondary case infection). As expected, the reproduction ratio estimates were highly sensitive to assumptions regarding the generation interval, which remains to be estimated for the current epidemic. Here, we suggest that the reproduction ratio was less than 2.2 - 3.1 in Mexico, depending on the generation interval. Monitoring and updating the reproduction ratio estimate as the epidemic spreads outside Mexico into different settings should remain a priority for assessing the situation and helping to plan public health interventions.

  8. Estimation of past sea-level variations based on ground-penetrating radar mapping of beach-ridges - preliminary results from Feddet, Faxe Bay, eastern Denmark

    DEFF Research Database (Denmark)

    Hede, Mikkel Ulfeldt; Nielsen, Lars; Clemmensen, Lars B

    2011-01-01

    Estimates of past sea-level variations based on different methods and techniques have been presented in a range of studies, including interpretation of beach ridge characteristics. In Denmark, Holocene beach ridge plains have been formed during the last c. 7700 years, a period characterised by both...... (i.e. sea-level) at the time of deposition. Combining the variations in height of the downlaps (in meters above present mean sea-level) with optically stimulated luminescence dating techniques provides estimates of relative sealevel at specific times....... been chosen as a key-locality in this project, as it is located relatively close to the current 0-isobase of isostatic rebound. GPR reflection data have been acquired with shielded 250 MHz Sensors & software antennae along a number of profile lines across beach ridge and swale structures of the Feddet...

  9. A-Train Aerosol Observations Preliminary Comparisons with AeroCom Models and Pathways to Observationally Based All-Sky Estimates

    Science.gov (United States)

    Redemann, J.; Livingston, J.; Shinozuka, Y.; Kacenelenbogen, M.; Russell, P.; LeBlanc, S.; Vaughan, M.; Ferrare, R.; Hostetler, C.; Rogers, R.; hide

    2014-01-01

    We have developed a technique for combining CALIOP aerosol backscatter, MODIS spectral AOD (aerosol optical depth), and OMI AAOD (absorption aerosol optical depth) retrievals for the purpose of estimating full spectral sets of aerosol radiative properties, and ultimately for calculating the 3-D distribution of direct aerosol radiative forcing. We present results using one year of data collected in 2007 and show comparisons of the aerosol radiative property estimates to collocated AERONET retrievals. Use of the recently released MODIS Collection 6 data for aerosol optical depths derived with the dark target and deep blue algorithms has extended the coverage of the multi-sensor estimates towards higher latitudes. We compare the spatio-temporal distribution of our multi-sensor aerosol retrievals and calculations of seasonal clear-sky aerosol radiative forcing based on the aerosol retrievals to values derived from four models that participated in the latest AeroCom model intercomparison initiative. We find significant inter-model differences, in particular for the aerosol single scattering albedo, which can be evaluated using the multi-sensor A-Train retrievals. We discuss the major challenges that exist in extending our clear-sky results to all-sky conditions. On the basis of comparisons to suborbital measurements, we present some of the limitations of the MODIS and CALIOP retrievals in the presence of adjacent or underlying clouds. Strategies for meeting these challenges are discussed.

  10. A CT-ultrasound-coregistered augmented reality enhanced image-guided surgery system and its preliminary study on brain-shift estimation

    Science.gov (United States)

    Huang, C. H.; Hsieh, C. H.; Lee, J. D.; Huang, W. C.; Lee, S. T.; Wu, C. T.; Sun, Y. N.; Wu, Y. T.

    2012-08-01

    With the combined view on the physical space and the medical imaging data, augmented reality (AR) visualization can provide perceptive advantages during image-guided surgery (IGS). However, the imaging data are usually captured before surgery and might be different from the up-to-date one due to natural shift of soft tissues. This study presents an AR-enhanced IGS system which is capable to correct the movement of soft tissues from the pre-operative CT images by using intra-operative ultrasound images. First, with reconstructing 2-D free-hand ultrasound images to 3-D volume data, the system applies a Mutual-Information based registration algorithm to estimate the deformation between pre-operative and intra-operative ultrasound images. The estimated deformation transform describes the movement of soft tissues and is then applied to the pre-operative CT images which provide high-resolution anatomical information. As a result, the system thus displays the fusion of the corrected CT images or the real-time 2-D ultrasound images with the patient in the physical space through a head mounted display device, providing an immersive augmented-reality environment. For the performance validation of the proposed system, a brain phantom was utilized to simulate brain-shift scenario. Experimental results reveal that when the shift of an artificial tumor is from 5mm ~ 12mm, the correction rates can be improved from 32% ~ 45% to 87% ~ 95% by using the proposed system.

  11. Improved methods to estimate the effective impervious area in urban catchments using rainfall-runoff data

    Science.gov (United States)

    Ebrahimian, Ali; Wilson, Bruce N.; Gulliver, John S.

    2016-05-01

    Impervious surfaces are useful indicators of the urbanization impacts on water resources. Effective impervious area (EIA), which is the portion of total impervious area (TIA) that is hydraulically connected to the drainage system, is a better catchment parameter in the determination of actual urban runoff. Development of reliable methods for quantifying EIA rather than TIA is currently one of the knowledge gaps in the rainfall-runoff modeling context. The objective of this study is to improve the rainfall-runoff data analysis method for estimating EIA fraction in urban catchments by eliminating the subjective part of the existing method and by reducing the uncertainty of EIA estimates. First, the theoretical framework is generalized using a general linear least square model and using a general criterion for categorizing runoff events. Issues with the existing method that reduce the precision of the EIA fraction estimates are then identified and discussed. Two improved methods, based on ordinary least square (OLS) and weighted least square (WLS) estimates, are proposed to address these issues. The proposed weighted least squares method is then applied to eleven urban catchments in Europe, Canada, and Australia. The results are compared to map measured directly connected impervious area (DCIA) and are shown to be consistent with DCIA values. In addition, both of the improved methods are applied to nine urban catchments in Minnesota, USA. Both methods were successful in removing the subjective component inherent in the analysis of rainfall-runoff data of the current method. The WLS method is more robust than the OLS method and generates results that are different and more precise than the OLS method in the presence of heteroscedastic residuals in our rainfall-runoff data.

  12. Assessment of the Orion-SLS Interface Management Process in Achieving the EIA 731.1 Systems Engineering Capability Model Generic Practices Level 3 Criteria

    Science.gov (United States)

    Jellicorse, John J.; Rahman, Shamin A.

    2016-01-01

    NASA is currently developing the next generation crewed spacecraft and launch vehicle for exploration beyond earth orbit including returning to the Moon and making the transit to Mars. Managing the design integration of major hardware elements of a space transportation system is critical for overcoming both the technical and programmatic challenges in taking a complex system from concept to space operations. An established method of accomplishing this is formal interface management. In this paper we set forth an argument that the interface management process implemented by NASA between the Orion Multi-Purpose Crew Vehicle (MPCV) and the Space Launch System (SLS) achieves the Level 3 tier of the EIA 731.1 System Engineering Capability Model (SECM) for Generic Practices. We describe the relevant NASA systems and associated organizations, and define the EIA SECM Level 3 Generic Practices. We then provide evidence for our compliance with those practices. This evidence includes discussions of: NASA Systems Engineering Interface (SE) Management standard process and best practices; the tailoring of that process for implementation on the Orion to SLS interface; changes made over time to improve the tailored process, and; the opportunities to take the resulting lessons learned and propose improvements to our institutional processes and best practices. We compare this evidence against the practices to form the rationale for the declared SECM maturity level.

  13. 建设项目环评中的信息公开%Disclosure of Environmental Information in Construction Project EIA

    Institute of Scientific and Technical Information of China (English)

    苗振华

    2009-01-01

    Public participation is an important way to solve environmental problems, and the disclosure of environmental information is the prerequisite for public participation of environmental affairs. In 2007 ,China promulgated "the Regulation on the Disclosure of Government Information" and "the Measures for the Disclosure of Environmental Information (Trial Implementation)",which provided legal framework for the disclosure of environmental information of EIA. However, there are many problems in the enforcement of these rules. Based on "the Arhus Convention", China should reform the disclosure of environmental information in EIA of construction projects in three ways: rule itself, related institutions and social background.%公众参与是解决环境问题的重要途径,而环境信息公开制度是公众参与环境事务的前提.我国2007年颁布的及为环境影响评价中的信息公开提供了法律保障,但其在实施过程中也存在着种种问题.借鉴的经验,我国建设项目环评中的信息公开应当从立法本身、相关制度及其实施的社会背景三个方面进行改善.

  14. Preliminary analysis of modeling of Pars and steam injectors to support long-term operation of LWR passive ECCS using a best estimate thermal-hydraulics code

    Energy Technology Data Exchange (ETDEWEB)

    Morales S, J. B.; Sanchez J, J. [UNAM, Facultad de Ingenieria, Circuito Interior s/n, Ciudad Universitaria, 04510 Mexico D. F. (Mexico); Espinosa P, G., E-mail: jaimebmoraless@gmail.co [Universidad Autonoma Metropolitana, Unidad Iztapalapa, Av. San Rafael Atlixco No. 186, Col. Vicentina, 09340 Mexico D. F. (Mexico)

    2010-10-15

    pools. This work presents Pars and steam injectors models, simulations and results of implementations in a best estimated thermal-hydraulics code, which are to be used for evaluations of these systems as long-term supports to ECCS. Lumped parameter models based on heat and mass balances have also been developed to test required additional best estimated code routines needed for the representation of Pars. (Author)

  15. Listeria spp. in broiler flocks: recovery rates and species distribution investigated by conventional culture and the EiaFoss method

    DEFF Research Database (Denmark)

    Petersen, Line Hedegård; Madsen, Mogens

    2000-01-01

    using CHR.4.17; Fraser and Fraser broths. L. monocytogenes was isolated from two of 71 broiler hocks, yielding an estimated flock prevalence of 3%. The flock prevalence of L. inocua was estimated to 13%, and it was speculated that the potential of this apathogenic bacteria to grow faster than L...

  16. 关于环评工作中的公众参与问题研究%Research on the Problem of the Public Participation in EIA Work

    Institute of Scientific and Technical Information of China (English)

    余祺

    2016-01-01

    我国当前的环境评价公众主要采取公示、问卷调查以及听证会三种方式,但是在具体落实过程存在较多的问题。因此,有必要结合我国当前环评工作中公众参与存在的现实问题提出针对性的解决方案。%The current assessment of public environment in our country mainly take in the three ways that through publicity, questionnaire and hearing, but there are many problems in the specific implementation process� Therefore, it is necessary to put forward specific solutions for the practical existing problems in our current public participation in EIA work.

  17. BASES TEÓRICO-CONCEITUAIS DE MÉTODOS PARA AVALIAÇÃO DE IMPACTOS AMBIENTAIS EM EIA/RIMA

    Directory of Open Access Journals (Sweden)

    Frederico Fonseca Galvão de Oliveira

    2007-01-01

    Full Text Available The serious partner-environmental crisis that the planet crosses takes to the formularization of new methods and instruments that minimize to the maximum the environmental impacts generated by the implantation and operation of potentially polluting enterprises. In this way, this article aims to bring a proposal of methods for environmental impact assessment, stage this, demanded in the elaboration of Evironment Impact Studies and the Environment Impact Report (EIA/RIMA. These studies are legal instruments that if consolidate to leave, of Law 6,938/81 that it makes use on the National Politics of the Environment, and Art. 225, (§ 1º, IV of the Federal Constitution, still with its federal regulation for Resolution 001/86 of the CONAMA. Therefore, it was exposed the environmental impacts, formulating a methodology for its analysis, with a posterior definition of the attributes and parameters to be used from "Matrices of Interaction".

  18. Uncovering the factors that can support and impede post-disaster EIA practice in developing countries: The case of Aceh Province, Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Gore, Tom; Fischer, Thomas B., E-mail: fischer@liverpool.ac.uk

    2014-01-15

    The close relationship between environmental degradation and the occurrence and severity of disaster events has in recent years raised the profile of environmental assessment (EA) in the disaster management field. EA has been identified as a potentially supportive tool in the global effort to reduce disaster risk. As a component of this, attention has been brought specifically to the importance of the application of EA in the aftermath of disaster events in order to help prevent recurrence and promote sustainability. At the same time, however, it has also been recognised that post-disaster environments may be unfavourable to such practices. Looking at the practice of environmental impact assessment (EIA), this paper reports on a study which sought to identify more specifically the factors which can both support and hinder such practice following disaster events in a developing country context. Analysing the situation in Aceh Province, Indonesia, after the impact of two tsunamigenic earthquakes in late 2004 and early 2005, it is concluded that if EIA is to have a central role in the post-disaster period, pre-disaster preparation could be a key. -- Highlights: • Close relationship between environmental degradation and occurrence/severity of disaster events has raised profile of EA. • EA as a potentially supportive tool in the global effort to reduce disaster risk • Application of EA in the aftermath of disaster events to help prevent recurrence and promote sustainability • The paper looks at factors which can both support and hinder EA following disaster events in a developing country context. • We analyse the situation in Aceh Province, Indonesia, after the impact of two tsunamigenic earthquakes in 2004 and 2005.

  19. Public Participation in Environmental Impact Assessment (EIA and Major Sports Events: A Comparative Analysis of the London 2012 Olympic Games and the Rio 2007 Pan American Games

    Directory of Open Access Journals (Sweden)

    Gisele Silva Pereira

    2015-01-01

    Full Text Available This paper explores public participation in environmental impact assessment (EIA and the decision making in the context of major sports events and their associated infrastructure in Brazil and England. The methodology is based on detailed case study analysis involving document analysis and interviews with key stakeholders. The results demonstrated that there is evidence that public participation within the EIA process informed the decision making and planning process for London 2012 and for the Pan American Village of the Rio 2007 Games. Finally, a practical recommendation for the Brazilian context and recommendations for further research are made. Participação pública na Avaliação de Impacto Ambiental (AIA e megaeventos esportivos: uma análise comparativa dos Jogos Olímpicos de Londres 2012 e dos Jogos Pan Americanos do Rio 2007 - Este artigo explora a participação pública na Avaliação de Impacto Ambiental (AIA e a tomada de decisão no contexto de megaeventos esportivos e a infraestrutura associada no Brasil e na Inglaterra. A metodologia baseia-se em estudo de caso envolvendo análise de documentos e entrevistas com atores-chave. Os resultados demonstraram que há evidência de que a participação pública integrante do processo de AIA informou a tomada de decisão e o processo de planejamento para Londres 2012 e para a Vila Pan Americana dos Jogos do Rio 2007. Finalmente, uma recomendação prática para o contexto brasileiro e recomendações para pesquisas futuras são destacadas.

  20. A clinical, epidemological, laboratorial, histological and ultrasonographical evaluation of anti-HCV EIA-2 positive blood donors Avaliação clínica, epidemiológica, laboratorial, histológica e ultrassonográfica de doadores de sangue anti-HCV EIA-2 positivos

    Directory of Open Access Journals (Sweden)

    Fernando L. GONÇALES JR

    2000-06-01

    Full Text Available Between 1992 and 1997, 790 blood donors with anti-HCV EIA-2 strongly reagent (relationship between the sample optical density/cut-off > 3 detected at the blood bank serological screening, were evaluated in ambulatory environment. They were all negative for Chagas disease, syphilis, hepatitis B (HBsAg and AIDS. Blood samples were collected at the first ambulatorial evaluation, for hemogram, biochemical tests and new serological tests for HCV (anti-HCV EIA-2. In blood samples of 226 repeatedly reagent anti-HCV EIA-2 blood donors, supplementary "immunoblot" test for HCV (RIBA-2 was used. In 209 donors, the presence of HCV-RNA was investigated by the PCR test. The abdominal ultrasonography was realized in 366 donors. In 269 patients liver biopsy was performed for the histopathological study. The follow-up of blood donors showed that 95.6% were repeatedly EIA-2 reagent, 94% were symptomless and denied any hepatitis history, with only 2% mentioning previous jaundice. In 47% of this population at least one risk factor has been detected for the HCV transmission, the use of intravenous drugs being the main one (27.8%. Blood transfusion was the second factor for HCV transmission (27.2%. Hepatomegaly was detected in 54% of the cases. Splenomegaly and signs of portal hypertension have seldom been found in the physical examination, indicating a low degree of hepatic compromising in HCV. Abdominal ultrasound showed alterations in 65% of the subjects, being the steatosis the most frequent (50%. In 83.5% of the donors submitted to the liver biopsy, the histopathological exam showed the presence of chronic hepatitis, usually classified as active (89% with mild or moderate grade in most of the cases (99.5%. The histopathological exam of the liver was normal in 1.5% of blood donors. The RIBA-2 test and the HCV-RNA investigation by PCR were positive in respectively 91.6 and 75% of the anti-HCV EIA-2 reagent donors. The HCV-RNA research was positive in 82% of the

  1. Comparasion of polyacrylamide gel electrophoresis (PAGE, immuno-electron microscopy (IEM and enzyme immunoassay (EIA for the rapid diagnosis of rotavirus infection in children

    Directory of Open Access Journals (Sweden)

    H. G. Pereira

    1983-12-01

    Full Text Available Detection of rotavirus RNA by polyacrylamide gel electrophoresis (PAGE proved to be a highly sensitive and rapid diagnostic test. A comparison of this assay with immuno-electron microscopy (IEM and enzyme immunoassay (EIA in 245 faeces from children with gastroenteritis revealed complete agreement between the three assays in 238 (97.14% samples. Among 75 samples positive in at least one of the three assays, negative results were observed in 5 (6.48% by PAGE, in 6 (6.76% by EIA and in none by IEM. Silver staining greatly increased the sensitivity of the PAGE assay. We conclude that although IEM remains the most sensitive and rapid rotavirus diagnostic assay, the PAGE technique has many advantages in its favour, including the non-requirement of expensive equipment, the use of only chemically defined reagents and the capacity to distinguish virus subgroup and variants and to detect non-crossreactive rotaviruses which are missed in serological assays.A evidenciação da presença de ácido ribonucleico (ARN viral por eletroforese em gel de policrilamida (EGPA foi comprovada como um método altamente sensível e rápido para o diagnóstico de infecções por rotavirus. Uma comparação desta prova com a imunomicroscopia eletrônica (IEM e com o ensaio imunoenzimático (EIE no exame de 245 fezes de crianças com gastroenterite revelou completa concordancia entre os três ensaios em 238 (97.14% amostras. Entre 75 amostras positivas pelo menos em um dos três ensaios, resultados negativos foram observados em 5 (6.48% por EGPA, em 6 (6.76% por EIE e em nenhum por IEM. Coloração pela prata aumentou consideravelmente a sensibilidade do ensaio por EGPA. Concluímos que embora a IEM ainda seja a prova mais sensível e rápida para o diagnóstico de infecções por rotavirus, o ensaio por EGPA tem muitas vantagens em seu favor, sendo as principais as de não necessitar equipamentos caros, de empregar exclusivamente reagentes quimicamente definidos, de

  2. The basis for decisions in the nuclear waste issue. Experiences of the legislative basis and the EIA process; Grunden foer beslut i kaernavfallsfraagan. Upplevelser av lagstiftningsgrund och MKB-process

    Energy Technology Data Exchange (ETDEWEB)

    Keskitalo, Carina; Nordlund, Annika; Lindgren, Urban (Umeaa Univ., Umeaa (Sweden))

    2009-03-15

    The purpose of the present study is to analyze the multi-level governance process in conjunction with the siting and design of a final repository for spent nuclear fuel. Since no similar activities have ever been implemented in Sweden, there is no available practice for how different laws should be coordinated and interpreted. The study sheds light on three general questions: 1) What is the formal decision-making mandate and what are the decision-making bodies at different levels (municipal level, regional or county level, and national level) according to the legislation, and what interpretation problems have these actors experienced with regard to the legislation and the EIA process? 2) What 'broader public' and organizations besides groups within the formal decision-making mandate have participated in the consultations, and what viewpoints have they expressed regarding the EIA process and consultations? 3) How have judgements and understanding of, and reactions to, risk related to the final repository been handled in the process? The study is mainly based on two different sources of material. A literature review with a focus on nuclear fuel management has been carried out within the social sciences field. Special interest has been devoted to discussing the content of legislation in relation to the EIA process and licensing, and the background and design of the EIA process. The EIA process is of special interest here, since it brings in both formal decision-making bodies and participation by broader groups. Furthermore, the literature review deals with theoretical perspectives regarding perceptions and communication of risk assessments. Literature reviews have also been conducted on minutes from EIA consultations during the period 2001 to 2007. The main source of the material used in the study is interview studies. The interview subjects represent both government authorities and non governmental organizations at the national, regional and local level

  3. The basis for decisions in the nuclear waste issue. Experiences of the legislative basis and the EIA process; Grunden foer beslut i kaernavfallsfraagan. Upplevelser av lagstiftningsgrund och MKB-process

    Energy Technology Data Exchange (ETDEWEB)

    Keskitalo, Carina; Nordlund, Annika; Lindgren, Urban (Umeaa Univ., Umeaa (Sweden))

    2009-03-15

    The purpose of the present study is to analyze the multi-level governance process in conjunction with the siting and design of a final repository for spent nuclear fuel. Since no similar activities have ever been implemented in Sweden, there is no available practice for how different laws should be coordinated and interpreted. The study sheds light on three general questions: 1) What is the formal decision-making mandate and what are the decision-making bodies at different levels (municipal level, regional or county level, and national level) according to the legislation, and what interpretation problems have these actors experienced with regard to the legislation and the EIA process? 2) What 'broader public' and organizations besides groups within the formal decision-making mandate have participated in the consultations, and what viewpoints have they expressed regarding the EIA process and consultations? 3) How have judgements and understanding of, and reactions to, risk related to the final repository been handled in the process? The study is mainly based on two different sources of material. A literature review with a focus on nuclear fuel management has been carried out within the social sciences field. Special interest has been devoted to discussing the content of legislation in relation to the EIA process and licensing, and the background and design of the EIA process. The EIA process is of special interest here, since it brings in both formal decision-making bodies and participation by broader groups. Furthermore, the literature review deals with theoretical perspectives regarding perceptions and communication of risk assessments. Literature reviews have also been conducted on minutes from EIA consultations during the period 2001 to 2007. The main source of the material used in the study is interview studies. The interview subjects represent both government authorities and non governmental organizations at the national, regional and local level

  4. A Cost Estimation of Biofuels for Naval Aviation: Budgeting for the Great Green Fleet

    Science.gov (United States)

    2011-12-01

    At the same time, increased use of domestic biofuels ( ethanol and biodiesel )…expanded domestic supplies and reduced the need for imports” (EIA, 2011...3. REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE A Cost Estimation of Biofuels for Naval Aviation: Budgeting for the Great...Massachusetts Institute of Technology (MIT) in 2009 titled “Near-Term Feasibility of Alternative Jet Fuels.” Over the past three years, multiple MIT theses

  5. EIA发表《2002年版世界能源展望》%EIA Releases "2002 World Energy Outlook"

    Institute of Scientific and Technical Information of China (English)

    汪璐

    2002-01-01

    @@ 美国能源情报署(EIA)最近发表了,主要内容如下: 1.石油需求.根据基础预测,随着世界经济的增长,世界石油的需求量将从2000年的每天7600万桶增长到2020年的每天1.189亿桶.2020年的需求量将是2000年的1.56倍.这将意味着石油需求年均增长2%,其中居首位的是运输业对石油需求的增加.到2020年,运输业的需求将占总需求量的70%.世界需求的增长趋势将受价格的左右.在低价位情况下,2020年的需求量预计为每天1.15亿~1.25亿桶.

  6. Avian post-construction studies and EIA for planned extension of the Hitra wind-power plant; EIA = environmental impact assessment; Ornitologisk etterundersoekelse og konsekvensutredning i tilknytning til planer for utvidelse av Hitra vindkraftverk

    Energy Technology Data Exchange (ETDEWEB)

    Bevanger, K.; Dahl, E.L.; Gjershaug, J.O.; Halley, D.J.; Hanssen, F.O.; Nygaard, T.; Pearson, M.; Pedersen, H.C.; Reitan, O.

    2010-03-15

    The results indicate that the annual number of dead birds recorded varies, and that an annual average probably is slightly less than two dead white-tailed eagles and four willow ptarmigans as long as 24 turbines are operating in the wind-power plant. The number of dead birds recorded is minimum figures. The total collision rate has not been estimated, however, the terrain where the power plant is located is difficult to search, and thus the habitat bias will be significant. Taking into account removal rate (scavenging bias) and search efficiency of the dog (search bias) it is assumed that the real number of casualties is somewhat higher. Dead birds are particularly found near turbines located at the edge of the power plant. There is insufficient evidence to conclude whether the recorded mortality for the white- tailed eagle is or is not acceptable with regard to short- or long-term population development. As regards the willow ptarmigan population, the data, while not conclusive, in combination with population censuses suggests that the power-plant extension will not be unacceptable for population development. Both for the white-tailed eagle and the willow ptarmigan an increased mortality must be expected when the power plant turbine number is increased.It is important to clarify whether there are established breeding pairs within the planning area, particularly in connection to the planned road access from the south. By building this road a general disturbance increase will take place. Whether the routing of the road will conflict with nest sites of red-listed species like the eagle owl and grey-headed wood- pecker is unknown as the routing not was known when the fieldwork took place during spring/summer 2009. There is, however, more reason to believe that the road might threaten an eagle owl territory than the contrary. The existing data are insufficient to conclude whether the encroachments connected to the road building from the south into the power-plant area

  7. Preliminary Monthly Climatological Summaries

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Preliminary Local Climatological Data, recorded since 1970 on Weather Burean Form 1030 and then National Weather Service Form F-6. The preliminary climate data pages...

  8. Simultaneous observations of electromagnetically induced transparency (EIT) and absorption (EIA) in a multi-level V-type system of 87Rb and theoretical simulation of the observed spectra using a multi-mode approach

    Science.gov (United States)

    Das, Bankim Chandra; Bhattacharyya, Dipankar; Das, Arpita; Chakrabarti, Shrabana; De, Sankar

    2016-12-01

    We report here simultaneous experimental observation of Electromagnetically Induced Transparency (EIT) and Electromagnetically Induced Absorption (EIA) in a multi-level V-type system in D2 transition of 87Rb, i.e., F =2 →F' with a strong pump and a weak probe beam. We studied the probe spectrum by locking the probe beam to the transition F =2 →F'=2 while the pump is scanned from F =2 →F' . EIA is observed for the open transition (F =2 →F'=2 ) whereas EIT is observed in the closed transition (F =2 →F'=3 ). Sub natural line-width is observed for the EIA. To simulate the observed spectra theoretically, Liouville equation for the three-level V-type system is solved analytically with a multi-mode approach for the density matrix elements. We assumed both the pump and the probe beams can couple the excited states. A multi-mode approach for the coherence terms facilitates the study of all the frequency contributions due to the pump and the probe fields. Since the terms contain higher harmonics of the pump and the probe frequencies, we expressed them in Fourier transformed forms. To simulate the probe spectrum, we have solved inhomogeneous difference equations for the coherence terms using the Green's function technique and continued fraction theory. The experimental line-widths of the EIT and the EIA are compared with our theoretical model. Our system can be useful in optical switching applications as it can be precisely tuned to render the medium opaque and transparent simultaneously.

  9. 可持续发展视野下的城市交通规划环评指标体系构建分析%Under sustainable development of urban transport planning EIA Index System Analysis

    Institute of Scientific and Technical Information of China (English)

    熊学锋

    2013-01-01

    城市规划环评中引入可持续发展理念是时代发展的必然要求。文章分析和探讨了可持续发展下的城市交通规划环评指标体系的内容、构建的原则、方法及主要内容,对广大环评工作者在实际操作过程中提供了可以借鉴的理论依据和参考。%urban planning EIA introduced the concept of sustainable development is an inevitable requirement for the development of the times.The article analyzes and discusses the contents of the index system of sustainable development under the Urban Transportation Plan -ning EIA build the principles , methods and main content in the actual operation , the majority of the EIA workers can learn the theoretical basis and reference .

  10. Assessment of pregnancy status of Asian elephants (Elephas maximus) by measurement of progestagen and glucocorticoid and their metabolite concentrations in serum and feces, using enzyme immunoassay (EIA).

    Science.gov (United States)

    Kajaysri, Jatuporn; Nokkaew, Weerapun

    2014-03-01

    The study was to find patterns of progestagen (progesterone and its metabolite) and glucocorticoid and their metabolite concentrations in serum and feces of pregnant Asian elephants (Elephas maximus). The 5 female Asian domestic elephants were naturally mated until pregnancy. After that, blood and feces samples were collected monthly during pregnancy for progestagen, glucocorticoid and their metabolites analysis by enzyme immunoassay (EIA). The results showed the serum progestagen concentration during gestation was 2.11 ± 0.60 to 18.44 ± 2.28 ng/ml. Overall, serum progestagen concentration rose from the 1st month to reach peak in the 11th month, after which it declined to its lowest level in the 22nd month of pregnancy. Fecal progestagen concentration varied from 1.18 ± 0.54 to 3.35 ± 0.45 µg/g during pregnancy. In general, fecal progestagen concentration increased from the 1st month to its highest level in the 12th month. After this, it declined reaching its lowest point in the 22nd month of pregnancy. Glucocorticoid hormones and their metabolite concentrations both in serum and feces fluctuated from low to medium throughout almost the entire pregnancy period and then rapidly increased around the last week before calving. Our study suggests that this profile of progestagen and glucocorticoid hormones and their metabolite concentration levels in serum and feces can be used to assess the pregnancy status of Asian elephants. If serum and fecal progestagen concentrations were found in very low levels and glucocorticoid and their metabolite concentrations were found in very high levels, it was indicated that the cow elephant would calve within 7 days.

  11. Estimating Bottleneck Bandwidth using TCP

    Science.gov (United States)

    Allman, Mark

    1998-01-01

    Various issues associated with estimating bottleneck bandwidth using TCP are presented in viewgraph form. Specific topics include: 1) Why TCP is wanted to estimate the bottleneck bandwidth; 2) Setting ssthresh to an appropriate value to reduce loss; 3) Possible packet-pair solutions; and 4) Preliminary results: ACTS and the Internet.

  12. Latitudinal GRBR-TEC estimation in Southeast Asia region based on the two-station method

    Science.gov (United States)

    Watthanasangmechai, Kornyanat; Yamamoto, Mamoru; Saito, Akinori; Tsugawa, Takuya; Yokoyama, Tatsuhiro; Supnithi, Pornchai; Yatini, Clara Yono

    2014-10-01

    Total electron content (TEC) is an important parameter for revealing latitudinal ionospheric structures, such as the equatorial ionization anomaly (EIA) in Southeast Asia. Understanding the EIA is beneficial for studying equatorial spread F. To reveal the structures, the absolute TEC as a function of latitude must be accurately determined. In early 2012, we expanded a GNU Radio Beacon Receiver (GRBR) network to provide latitudinal coverage in the Thailand-Indonesia sector. We employed the GRBR network to receive VHF and UHF signals from polar low-Earth-orbit satellites. The TEC offset is an unknown parameter in the absolute TEC estimation process. We propose a new technique based on the two-station method to estimate the offset for the latitudinal TEC estimation, and it works better than the original method for a sparse network. The TEC estimation system requires two iterations to minimize the root-mean-square error (RMSE). Once the RMSE reaches the global minimum, the absolute TECs are estimated simultaneously over five GRBR stations. GPS-TECs from local stations are used as the initial guess of the offset estimation. The height of the ionospheric pierce point is determined from the ionosonde hmF2. As a result, the latitudinal GRBR-TEC was successfully estimated from the polar orbit satellites. The two EIA humps were clearly captured by the GRBR-TEC. The result was well verified with the TEC reconstructed from the C/NOFS density data and the ionosonde bottomside data. This is a significant step showing that the GRBR is a useful tool for the study of low-latitude ionospheric features.

  13. Capital and operating cost estimates. Volume I. Preliminary design and assessment of a 12,500 BPD coal-to-methanol-to-gasoline plant. [Grace C-M-G Plant, Henderson County, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    1982-08-01

    This Deliverable No. 18b - Capital and Operating Cost Estimates includes a detailed presentation of the 12,500 BPD coal-to-methanol-to-gasoline plant from the standpoint of capital, preoperations, start-up and operations cost estimation. The base capital cost estimate in June 1982 dollars was prepared by the Ralph M. Parsons Company under the direction of Grace. The escalated capital cost estimate as well as separate estimates for preoperations, startup and operations activities were developed by Grace. The deliverable consists of four volumes. Volume I contains details of methodology used in developing the capital cost estimate, summary information on a base June 1982 capital cost, details of the escalated capital cost estimate and separate sections devoted to preoperations, start-up, and operations cost. The base estimate is supported by detailed information in Volumes II, III and IV. The degree of detail for some units was constrained due to proprietary data. Attempts have been made to exhibit the estimating methodology by including data on individual equipment pricing. Proprietary details are available for inspection upon execution of nondisclosure and/or secrecy agreements with the licensors to whom the data is proprietary. Details of factoring certain pieces of equipment and/or entire modules or units from the 50,000 BPD capital estimate are also included. In the case of the escalated capital estimate, Grace has chosen to include a sensitivity analysis which allows for ready assessment of impacts of escalation rates (inflation), contingency allowances and the construction interest financing rates on the escalated capital cost. Each of the estimates associated with bringing the plant to commercial production rates has as a basis the schedule and engineering documentation found in Deliverable No. 14b - Process Engineering and Mechanical Design Report, No. 28b - Staffing Plans, No. 31b - Construction Plan, and No. 33b - Startup and Operation Plan.

  14. Environmental impact assessment modern dressed? To the amendment of the EIA act and other acts and regulations; Umweltvertraeglichkeitspruefung im modernen Gewand? Zur Aenderung des UVP-Gesetzes und zahlreicher weiterer Gesetze und Verordnungen

    Energy Technology Data Exchange (ETDEWEB)

    Feldmann, Ulrike

    2017-03-15

    On 22 December 2016, the Federal Ministry for the Environment (BMUB) presented the ''Draft Act for the Modernization of the Act on the Environmental Impact Assessment'' within the framework of the association consultation, as well as the ''Draft first Ordinance Amending the Ordinance on the Approval Procedure - 9. BImSchV''. The EIA Modernization Act as well as the Atomic Act Procedure Regulation and the Federal Mining Act should be revised by terms of an omnibus act. The association consultation was held on 18 January 2017.

  15. Preliminary Estimation of Black Carbon Deposition from Nepal Climate Observatory-Pyramid Data and Its Possible Impact on Snow Albedo Changes Over Himalayan Glaciers During the Pre-Monsoon Season

    Science.gov (United States)

    Yasunari, T. J.; Bonasoni, P.; Laj, P.; Fujita, K.; Vuillermoz, E.; Marinoni, A.; Cristofanelli, P.; Duchi, R.; Tartari, G.; Lau, K.-M.

    2010-01-01

    The possible minimal range of reduction in snow surface albedo due to dry deposition of black carbon (BC) in the pre-monsoon period (March-May) was estimated as a lower bound together with the estimation of its accuracy, based on atmospheric observations at the Nepal Climate Observatory-Pyramid (NCO-P) sited at 5079 m a.s.l. in the Himalayan region. We estimated a total BC deposition rate of 2.89 g m-2 day-1 providing a total deposition of 266 micrograms/ square m for March-May at the site, based on a calculation with a minimal deposition velocity of 1.0 10(exp -4) m/s with atmospheric data of equivalent BC concentration. Main BC size at NCO-P site was determined as 103.1-669.8 nm by correlation analysis between equivalent BC concentration and particulate size distribution in the atmosphere. We also estimated BC deposition from the size distribution data and found that 8.7% of the estimated dry deposition corresponds to the estimated BC deposition from equivalent BC concentration data. If all the BC is deposited uniformly on the top 2-cm pure snow, the corresponding BC concentration is 26.0-68.2 microgram/kg assuming snow density variations of 195-512 kg/ cubic m of Yala Glacier close to NCO-P site. Such a concentration of BC in snow could result in 2.0-5.2% albedo reductions. From a simple numerical calculations and if assuming these albedo reductions continue throughout the year, this would lead to a runoff increases of 70-204 mm of water drainage equivalent of 11.6-33.9% of the annual discharge of a typical Tibetan glacier. Our estimates of BC concentration in snow surface for pre-monsoon season can be considered comparable to those at similar altitude in the Himalayan region, where glaciers and perpetual snow region starts in the vicinity of NCO-P. Our estimates from only BC are likely to represent a lower bound for snow albedo reductions, since a fixed slower deposition velocity was used and atmospheric wind and turbulence effects, snow aging, dust deposition

  16. Preliminary risk assessment for nuclear waste disposal in space, volume 1

    Science.gov (United States)

    Rice, E. E.; Denning, R. S.; Friedlander, A. L.

    1982-01-01

    The feasibility, desirability and preferred approaches for disposal of selected high-level nuclear wastes in space were analyzed. Preliminary space disposal risk estimates and estimates of risk uncertainty are provided.

  17. 2016 TRI Preliminary Dataset

    Science.gov (United States)

    The TRI preliminary dataset includes the most current TRI data available and reflects toxic chemical releases and pollution prevention activities that occurred at TRI facilities during the 2016 calendar year.

  18. Modeling the Capacity and Emissions Impacts of Reduced Electricity Demand. Part 1. Methodology and Preliminary Results

    Energy Technology Data Exchange (ETDEWEB)

    Coughlin, Katie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Shen, Hongxia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Chan, Peter [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; McDevitt, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division; Sturges, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Environmental Energy Technologies Division

    2013-02-07

    Policies aimed at energy conservation and efficiency have broad environmental and economic impacts. Even if these impacts are relatively small, they may be significant compared to the cost of implementing the policy. Methodologies that quantify the marginal impacts of reduced demand for energy have an important role to play in developing accurate measures of both the benefits and costs of a given policy choice. This report presents a methodology for estimating the impacts of reduced demand for electricity on the electric power sector as a whole. The approach uses the National Energy Modeling System (NEMS), a mid-range energy forecast model developed and maintained by the U.S. Department of Energy, Energy Information Administration (EIA)(DOE EIA 2013). The report is organized as follows: In the rest of this section the traditional NEMS-BT approach is reviewed and an outline of the new reduced form NEMS methodology is presented. Section 2 provides an overview of how the NEMS model works, and describes the set of NEMS-BT runs that are used as input to the reduced form approach. Section 3 presents our NEMS-BT simulation results and post-processing methods. In Section 4 we show how the NEMS-BT output can be generalized to apply to a broader set of end-uses. In Section 5 we disuss the application of this approach to policy analysis, and summarize some of the issues that will be further investigated in Part 2 of this study.

  19. Preliminary Investigation of a Paraglider

    Science.gov (United States)

    Rogallo, Francis M.; Lowry, John G.; Croom, Delwin R.; Taylor, Robert T.

    1960-01-01

    A preliminary investigation of the aerodynamic and control characteristics of a flexible glider similar to a parachute in construction has been made at the Langley Research Center to evaluate its capabilities as a reentry glider. Preliminary weight estimates of the proposed vehicle indicate that such a structure can be made with extremely low wing loading. Maximum temperatures during the reentry maneuver might be held as low as about 1,500 F. The results of wind-tunnel and free-glide tests show that the glider when constructed of nonporous material performed extremely well at subsonic speeds and could be flown at angles of attack from about 200 to 900. At supersonic speeds the wing showed none of the unfavorable tendencies exhibited by conventional parachutes at these speeds, such as squidding and breathing. Several methods of packing and deploying the glider have been successfully demonstrated. The results of this study indicate that this flexible-lifting-surface concept may provide a lightweight controllable paraglider for manned space vehicles.

  20. A Paisagem na Área de Influência da Usina Hidrelétrica do FUNIL (UHE-FUNIL, Percebida Através do EIA-RIMA

    Directory of Open Access Journals (Sweden)

    Silvério José Coelho

    2010-12-01

    Full Text Available A construção de uma hidrelétrica provoca grandes transformações na paisagem regional, provocando rápida degradação ambiental, contrária ao processo milenar de sua formação. A implantação de hidrelétricas é definida por pré-requisitos, como a disponibilidade de água, topografia e geologia adequadas e, assim, o estudo integral da paisagem – sistema em constante transformação, não faz parte do processo. A Usina Hidrelétrica do Funil, UHEFunil, foi construída no alto do rio Grande, próximo à cidade de Lavras – MG. Os primeiros estudos são da década de 1960; os estudos e relatórios de impacto ambiental – EIA-RIMA de 1991/1992 e, em 2003, iniciou-se a operação comercial. Objetivou-se, nesta pesquisa, analisar toda a documentação referente ao EIA-RIMA, para perceber como a paisagem na área de influência da usina foi considerada antes, durante e após sua construção; objetivouse também verificar se os estudos apontaram alternativas para o aproveitamento ou a preservação dos recursos naturais, questionando-se sobre a relação entre os benefícios da geração de energia elétrica e os conseqüentes danos ambientais. Os resultados conduziram a uma análise temporal com três estágios de transformação da paisagem: dos primórdios da ocupação antrópica até a época do EIA-RIMA; modificações durante a construção e enchimento da barragem e o surgimento de novas paisagens após a construção da usina.

  1. 基于电子监测系统的我国产品伤害估计初探%Preliminary Study on the Product Injury Estimation Based on the Electronic Monitoring System in China

    Institute of Scientific and Technical Information of China (English)

    郑立伟; 唐宽昊; 王晨铖; 王慧萍

    2015-01-01

    Starting from the definition of product injury monitoring, this article builds the estimation model of product injury in China based on the experience of foreign product injury monitoring system. To facilitate the comparison of different countries, we establishes two indexes named product injury rate and product injury per unit GDP based on the estimation model. This article further explores the social investigation method and injury cost model of product injury to estimate the economic loss caused by product injury. At last, in consideration of the problems and shortcomings of the current product injury monitoring system, the corresponding policy recommendations are put forward to form the whole frame and thinking for product injury monitoring in China.%本文从产品伤害的定义出发,在借鉴国外产品伤害监测及估计方法的基础上,构建了我国产品伤害的估计模型,并利用模型的计算结果建立了产品伤害率与单位GDP产品伤害数指标,对各国多年度数据进行比较。文章进一步探索了对产品伤害经济损失进行估计的社会调查方法以及产品伤害损失模型,针对我国当前产品伤害监测系统存在的问题与不足,提出相应的政策建议,形成我国产品伤害监测工作的整体思路与框架。

  2. Preliminary rock mechanics laboratory: Investigation plan

    Energy Technology Data Exchange (ETDEWEB)

    Oschman, K.P.; Hummeldorf, R.G.; Hume, H.R.; Karakouzian, M.; Vakili, J.E.

    1987-01-01

    This document presents the rationale for rock mechanics laboratory testing (including the supporting analysis and numerical modeling) planned for the site characterization of a nuclear waste repository in salt. This plan first identifies what information is required for regulatory and design purposes, and then presents the rationale for the testing that satisfies the required information needs. A preliminary estimate of the minimum sampling requirements for rock laboratory testing during site characterization is also presented. Periodic revision of this document is planned.

  3. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  4. 中国氢氟碳化物、全氟化碳和六氟化硫排放源初步估算%Preliminary Estimation of Emission of HFCs, PFCs and SF6 from China in 1995

    Institute of Scientific and Technical Information of China (English)

    张仁健; 王明星; 杨昕; 王跃思

    2000-01-01

    通过调研大量资料和统计分析,初步估算出1995年中国氢氟碳化物(HFCs)、全氟化碳(PFCs)和六氟化硫(SF6)这6种温室气体的排放量,分别为2244、2581.2和215 t,分别占当年全球排放总量的0.9%、6.45%和3.7%。%The emission of hydrofluorocarbons (HFCs), perfluorocarbon (PFCs) and sulfur hexafluoride (SF6) from China in 1995 are estimated primarily as 2 244 t, 2 581.2 t and 215 t, which account for 0.9%, 6.45% and 3.7% of the world total emission, respectively.

  5. Federal Air Pollutant Emission Regulations and Preliminary Estimates of Potential-to-Emit from Biorefineries, Pathway #2: Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels: Fast Pyrolysis and Hydrotreating Bio-oil Pathway

    Energy Technology Data Exchange (ETDEWEB)

    Bhatt, Arpit [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center. Technology Systems and Sustainability Analysis Group; Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center. Technology Systems and Sustainability Analysis Group; Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center. Technology Systems and Sustainability Analysis Group; Thomas, Mae [Eastern Research Group, Research Triangle Park, NC (United States); Renzaglia, Jason [Eastern Research Group, Research Triangle Park, NC (United States)

    2017-01-01

    Biorefineries are subject to environmental laws, including complex air quality regulations that aim to protect and improve the quality of the air. These regulations govern the amount of certain types of air pollutants that can be emitted from different types of emission sources. To determine which federal air emission regulations potentially apply to the fast pyrolysis biorefinery, we first identified the types of regulated air pollutants emitted to the ambient environment by the biorefinery or from specific equipment. Once the regulated air pollutants are identified, we review the applicability criteria of each federal air regulation to determine whether the fast pyrolysis biorefinery or specific equipment is subject to it. We then estimate the potential-to-emit of pollutants likely to be emitted from the fast pyrolysis biorefinery to understand the air permitting requirements.

  6. Federal Air Pollutant Emission Regulations and Preliminary Estimates of Potential-to-Emit from Biorefineries. Pathway #1: Dilute-Acid and Enzymatic Deconstruction of Biomass-to-Sugars and Biological Conversion of Sugars-to-Hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bhatt, Arpit [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thomas, Mae [Eastern Research Group, Lexington, MA (United States); Renzaglia, Jason [Eastern Research Group, Lexington, MA (United States)

    2016-02-01

    Biorefineries are subject to environmental laws, including complex air quality regulations that aim to protect and improve the quality of the air. These regulations govern the amount of certain types of air pollutants that can be emitted from different types of emission sources. To determine which federal air emission regulations potentially apply to the sugars-to-hydrocarbon (HC) biorefinery, we first identified the types of regulated air pollutants emitted to the ambient environment by the biorefinery or from specific equipment. Once the regulated air pollutants are identified, we review the applicability criteria of each federal air regulation to determine whether the sugars-to-HC biorefinery or specific equipment is subject to it. We then estimate the potential-to-emit of pollutants likely to be emitted from the sugars-to-HC biorefinery to understand the air permitting requirements.

  7. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  8. Short-term energy outlook, January 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    The Energy Information Administration (EIA) prepares the Short-Term Energy Outlook (energy supply, demand, and price projections) monthly. The forecast period for this issue of the Outlook extends from January 1999 through December 2000. Data values for the fourth quarter 1998, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the January 1999 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. Macroeconomic estimates are produced by DRI/McGraw-Hill but are adjusted by EIA to reflect EIA assumptions about the world price of crude oil, energy product prices, and other assumptions which may affect the macroeconomic outlook. By varying the assumptions, alternative cases are produced by using the STIFS model. 28 figs., 19 tabs.

  9. Architects and Design-Phase Cost Estimates: Design Professionals Should Reconsider the Value of Third-Party Estimates

    Science.gov (United States)

    Coakley, John

    2010-01-01

    Professional cost estimators are widely used by architects during the design phases of a project to provide preliminary cost estimates. These estimates may begin at the conceptual design phase and are prepared at regular intervals through the construction document phase. Estimating professionals are frequently tasked with "selling" the importance…

  10. 桂林旅游业碳排放的初步估算及脱钩关系分析%Preliminary estimation of carbon emission and analysis of decoupling relationship in Guilin tourism

    Institute of Scientific and Technical Information of China (English)

    杨莎莎; 邱雪晨; 张晓君

    2014-01-01

    旅游业碳排放研究是旅游业健康持续发展的保障。通过建立旅游业碳排放量估算模型,对桂林旅游业碳排放量进行初步估算,并对桂林旅游碳排放与旅游经济的脱钩关系进行了分析。研究发现:2000—2012年,桂林旅游业碳排放量呈上升趋势,人均旅游碳排放量变化趋势不同于旅游业碳排放总量变化趋势,旅游业碳排放与旅游经济以弱脱钩关系为主。据此提出应通过改变能源使用及消费结构,加强旅游碳排放管理,促进低碳技术发展等手段,实现桂林旅游业碳排放与旅游经济的强脱钩状态。%The study of tourism carbon emissions is important in healthy and sustainable development of tourism.By building tourism carbon emission estimation model,Guilin tourism carbon emission is evalualed, and the decoupling relationship between tourism carbon emission and tourism economy analyzed.It is found that from 2000 to 2012,Guilin tourism carbon emissions is on the rise,the tourism per capita carbon emission trend is different from the tourism carbon emissions trend.The decoupling relationship between carbon emissions in tourism sector and tourism economy is mainly a weak decoupling.Accordingly,some effective policies are put forward for a strong decoupling relationshi pbetween carbon emissions in tourism sector and tourism economy, by changing the energy consumption structure,strengthening the tourism carbon emission management,and en-forcing low-carbon technologies.

  11. Preliminary Estimation of Carbon Dioxide Storage Capacity in the Oil Reservoirs in Subei Basin%苏北盆地油田封存二氧化碳潜力初探

    Institute of Scientific and Technical Information of China (English)

    汪传胜; 田蓉; 季峻峰; 孙蓓; 张婷; 胡高明

    2012-01-01

    The CO2 storage in oil reservoirs is one of the most effective ways of reducing the greenhouse gas emission, which is based on the mechanisms of structural and stratigraphic trapping, residual gas trapping, dissolution trapping and mineral trapping. The universal pyramid method is introduced to assess the CO2 storage capacity for the oil reservoirs. Subei basin has many oil reservoirs with low permeability and water content. Dongtai sag is belter than Yancheng-Funing sag on the CO2 storage potential. Gaoyou depression and Jinhu depression have the greatest potential of CO2 storage among the secondary geological units. A series of the small tectonic units in this area are more suitable for CO2 storage, and beneficial to the preservation of late stage. Subei basin has obviously vertical dichotomy on the sealing ability of CO2 storage. The lower cap rocks of upper Cretaceous system and Paleocene series have better sealing capabily than the upper cap rocks of the Eocene epoch. Based on analyzing the mechanism of CO2 storage in oil reservoirs and combining with geological and structural conditions of Subei basin, we estimated that the theoretical storage capacities of CO, is 1.5054 × 108 1 and the effective storage capacities of CO2 is 0.0828 × 108t ~ 0.4421 × 108 t, which shows the great potential of CO2 storage in Subei basin, Jiangsu Province.%油田二氧化碳封存是减少温室气体排放量最有效的途径之一,油藏中封存CO2主要有构造地层储存、束缚气储存、溶解储存和矿化储存等四种方式,CO2在油藏中的地质储存容量采用国际上通用的资源储量金字塔理论来进行潜力评价.本文通过分析油田CO2封存机理,结合江苏省苏北盆地的地质和构造条件,对苏北盆地油田进行CO2封存潜力研究.苏北盆地油田多为低渗透和含水油藏,在储存CO2的潜力上,东台坳陷优于盐阜坳陷,次级单元中又以高邮凹陷、金湖凹陷封存CO2潜力最大,一系列小型

  12. Parameter Estimation

    DEFF Research Database (Denmark)

    2011-01-01

    of optimisation techniques coupled with dynamic solution of the underlying model. Linear and nonlinear approaches to parameter estimation are investigated. There is also the application of maximum likelihood principles in the estimation of parameters, as well as the use of orthogonal collocation to generate a set......In this chapter the importance of parameter estimation in model development is illustrated through various applications related to reaction systems. In particular, rate constants in a reaction system are obtained through parameter estimation methods. These approaches often require the application...... of algebraic equations as the basis for parameter estimation.These approaches are illustrated using estimations of kinetic constants from reaction system models....

  13. On Preliminary Breakdown

    Science.gov (United States)

    Beasley, W. H.; Petersen, D.

    2013-12-01

    The preliminary breakdown phase of a negative cloud-to-ground lightning flash was observed in detail. Observations were made with a Photron SA1.1 high-speed video camera operating at 9,000 frames per second, fast optical sensors, a flat-plate electric field antenna covering the SLF to MF band, and VHF and UHF radio receivers with bandwidths of 20 MHz. Bright stepwise extensions of a negative leader were observed at an altitude of 8 km during the first few milliseconds of the flash, and were coincident with bipolar electric field pulses called 'characteristic pulses'. The 2-D step lengths of the preliminary processes were in excess of 100 meters, with some 2-D step lengths in excess of 200 meters. Smaller and shorter unipolar electric field pulses were superposed onto the bipolar electric field pulses, and were coincident with VHF and UHF radio pulses. After a few milliseconds, the emerging negative stepped leader system showed a marked decrease in luminosity, step length, and propagation velocity. Details of these events will be discussed, including the possibility that the preliminary breakdown phase consists not of a single developing lightning leader system, but of multiple smaller lightning leader systems that eventually join together into a single system.

  14. Preliminary results of ground-motion characteristics

    Directory of Open Access Journals (Sweden)

    Francesca Bozzoni

    2012-10-01

    Full Text Available The preliminary results are presented herein for the engineering applications of the characteristics of the ground motion induced by the May 20, 2012, Emilia earthquake. Shake maps are computed to provide estimates of the spatial distribution of the induced ground motion. The signals recorded at the Mirandola (MRN station, the closest to the epicenter, have been processed to obtain acceleration, velocity and displacement response spectra. Ground-motion parameters from the MRN recordings are compared with the corresponding estimates from recent ground-motion prediction equations, and with the spectra prescribed by the current Italian Building Code for different return periods. The records from the MRN station are used to plot the particle orbit (hodogram described by the waveform. The availability of results from geotechnical field tests that were performed at a few sites in the Municipality of Mirandola prior to this earthquake of May 2012 has allowed preliminary assessment of the ground response. The amplification effects at Mirandola are estimated using fully stochastic site-response analyses. The seismic input comprises seven actual records that are compatible with the Italian code-based spectrum that refers to a 475-year return period. The computed acceleration response spectrum and the associated dispersion are compared to the spectra calculated from the recordings of the MRN station. Good agreement is obtained for periods up to 1 s, especially for the peak ground acceleration. For the other periods, the spectral acceleration of the MRN recordings exceeds that of the computed spectra.

  15. Environmental Survey preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  16. Ruiz Volcano: Preliminary report

    Science.gov (United States)

    Ruiz Volcano, Colombia (4.88°N, 75.32°W). All times are local (= GMT -5 hours).An explosive eruption on November 13, 1985, melted ice and snow in the summit area, generating lahars that flowed tens of kilometers down flank river valleys, killing more than 20,000 people. This is history's fourth largest single-eruption death toll, behind only Tambora in 1815 (92,000), Krakatau in 1883 (36,000), and Mount Pelée in May 1902 (28,000). The following briefly summarizes the very preliminary and inevitably conflicting information that had been received by press time.

  17. PRELIMINARY PROGRAMMED WHOLE—BODY COUNTER

    Institute of Scientific and Technical Information of China (English)

    张少东; 郑文忠; 等

    1995-01-01

    It is capable of giving the initial intakes of radionuclides and the assessment quantitites used in radiation protection according to its measured results of radionuclides in vivo.It is accomplished by providing the software of controlling,interface and internal dose estimation programs to the original iron cabin shielding whole-body counter.The preliminary application shows that its data processing is rapid and correct,and can meet the requirement of rapid internal radioactive contamination monitoring and diagnosing in case of lots of internal contamination subjects happened in nuclear accident.

  18. Underwater Munitions Expert System: Preliminary Design Report

    Science.gov (United States)

    2015-08-21

    coral   reefs ,  can  be  added  to  future  versions  of  UnMES.     For  this  preliminary  UnMES...administer  areas   polluted  by  discarded  munitions.    Towards  this  end,  SERDP  is   sponsoring   the   development...estimating   seawater   pollution   from   dissolved   chemical   components  of  munitions.    

  19. 12 CFR 611.1250 - Preliminary exit fee estimate.

    Science.gov (United States)

    2010-01-01

    ...) You have taken any other actions unrelated to your core business that have the effect of changing the... services, studies, auditing, business planning, equity holder meetings, and application fees for the..., studies, auditing, business planning, equity holder meetings, and application fees for the termination and...

  20. Preliminary Scaling Estimate for Select Small Scale Mixing Demonstration Tests

    Energy Technology Data Exchange (ETDEWEB)

    Wells, Beric E.; Fort, James A.; Gauglitz, Phillip A.; Rector, David R.; Schonewill, Philip P.

    2013-09-12

    The Hanford Site double-shell tank (DST) system provides the staging location for waste that will be transferred to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Specific WTP acceptance criteria for waste feed delivery describe the physical and chemical characteristics of the waste that must be met before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST because the waste contains solid particles that settle and their concentration and relative proportion can change during the transfer of the waste in individual batches. A key uncertainty in the waste feed delivery system is the potential variation in UDS transferred in individual batches in comparison to an initial sample used for evaluating the acceptance criteria. To address this uncertainty, a number of small-scale mixing tests have been conducted as part of Washington River Protection Solutions’ Small Scale Mixing Demonstration (SSMD) project to determine the performance of the DST mixing and sampling systems.

  1. Metabolic syndrome among patients receiving clozapine: A preliminary estimate

    Directory of Open Access Journals (Sweden)

    Sandeep Grover

    2011-01-01

    Full Text Available Objective : To study the prevalence of metabolic syndrome in patients receiving clozapine. Materials and Methods : For this study, 100 patients attending the psychiatry outpatient clinic of a tertiary care hospital who were receiving clozapine for more than three months were evaluated for the presence of metabolic syndrome using the International Diabetes Federation (IDF and modified National Cholesterol Education Program Adult Treatment Panel III (NCEP ATP-III criteria. Results : Forty-six patients fulfilled IDF criteria and 47 met modified NCEP ATP-III criteria of metabolic syndrome. There was significant correlation between these two sets of criteria used to define the metabolic syndrome (Kappa value -0.821, P < 0.001. Among the individual parameters studied, increased waist circumference was the most common abnormality, followed by abnormal blood glucose levels and elevated triglyceride levels. All these abnormalities were seen in more than half (52-61% of the patients. When the sample was divided into two groups, i.e., those with and without metabolic syndrome, patients with metabolic syndrome had significantly higher body mass index and had spent more time in school. Logistic regression analysis revealed that these two variables together explained about 19% of the variance in metabolic syndrome (adjusted r 2 = 0193; F = 12.8; P < 0.001. Conclusion : The findings of the present study suggest that metabolic syndrome is highly prevalent in subjects receiving clozapine.

  2. Battery energy storage: A preliminary assessment of national benefits (the Gateway Benefits Study)

    Energy Technology Data Exchange (ETDEWEB)

    Akhil, A. [Sandia National Labs., Albuquerque, NM (United States); Zaininger, H. [Zaininger Engineering Co., San Jose, CA (United States); Hurwitch, J.; Badin, J. [Energetics, Inc., Columbia, MD (United States)

    1993-12-01

    Preliminary estimates of national benefits from electric utility applications of battery energy storage through the year 2010 are presented along with a discussion of the particular applications studied. The estimates in this report were based on planning information reported to DOE by electric utilities across the United States. Future studies are planned to refine these estimates as more application-specific information becomes available.

  3. Analysis of Empirical Software Effort Estimation Models

    CERN Document Server

    Basha, Saleem

    2010-01-01

    Reliable effort estimation remains an ongoing challenge to software engineers. Accurate effort estimation is the state of art of software engineering, effort estimation of software is the preliminary phase between the client and the business enterprise. The relationship between the client and the business enterprise begins with the estimation of the software. The credibility of the client to the business enterprise increases with the accurate estimation. Effort estimation often requires generalizing from a small number of historical projects. Generalization from such limited experience is an inherently under constrained problem. Accurate estimation is a complex process because it can be visualized as software effort prediction, as the term indicates prediction never becomes an actual. This work follows the basics of the empirical software effort estimation models. The goal of this paper is to study the empirical software effort estimation. The primary conclusion is that no single technique is best for all sit...

  4. Parameter Estimation

    DEFF Research Database (Denmark)

    Sales-Cruz, Mauricio; Heitzig, Martina; Cameron, Ian;

    2011-01-01

    of optimisation techniques coupled with dynamic solution of the underlying model. Linear and nonlinear approaches to parameter estimation are investigated. There is also the application of maximum likelihood principles in the estimation of parameters, as well as the use of orthogonal collocation to generate a set...

  5. A Preliminary Jupiter Model

    CERN Document Server

    Hubbard, W B

    2016-01-01

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen-helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses, and a hydrogen-helium-rich envelope with...

  6. A Preliminary Jupiter Model

    Science.gov (United States)

    Hubbard, W. B.; Militzer, B.

    2016-03-01

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen-helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen-helium-rich envelope with approximately three times solar metallicity.

  7. A preliminary bending fatigue spectrum for steel monostrand cables

    DEFF Research Database (Denmark)

    Winkler, Jan; Fischer, Gregor; Georgakis, Christos T.;

    2011-01-01

    This paper presents the results of the experimental study on the bending fatigue resistance of high-strength steel monostrand cables. From the conducted fatigue tests in the high-stress, low-cycle region, a preliminary bending fatigue spectrum is derived for the estimation of monostrand cable...... service life expectancy. The presented preliminary bending fatigue spectrum of high-strength monostrands is currently unavailable in the published literature. The presented results provide relevant information on the bending mechanism and fatigue characteristics of monostrand steel cables in tension...

  8. Thermal energy storage in aquifiers: preliminary information

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.

    1979-12-01

    Topics discussed include: conceptual designs; numerical modelling; field experiments; relevant technical information; feasibility studies; preliminary aquifer selection considerations; and preliminary design and operating considerations. (TFD)

  9. Short-term energy outlook, quarterly projections, first quarter 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The forecast period for this issue of the Outlook extends from the first quarter of 1998 through the fourth quarter of 1999. Values for the fourth quarter of 1997, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the first quarter 1998 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. Macroeconomic estimates are adjusted by EIA to reflect EIA assumptions which may affect the macroeconomic outlook. By varying the assumptions, alternative cases are produced by using the STIFS model. 24 figs., 19 tabs.

  10. Short-term energy outlook, April 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The forecast period for this issue of the Outlook extends from April 1999 through December 2000. Data values for the first quarter 1999, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the April 1999 version of the Short-Term Integrated forecasting system (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. Macroeconomic estimates are produced by DRI/McGraw-Hill but are adjusted by EIA to reflect EIA assumptions about the world price of crude oil, energy product prices, and other assumptions which may affect the macroeconomic outlook. By varying the assumptions, alternative cases are produced by using the STIFS model. 25 figs., 19 tabs.

  11. Estimating Principal Effectiveness. Working Paper 32

    Science.gov (United States)

    Branch, Gregory; Hanushek, Eric; Rivkin, Steven

    2009-01-01

    Much has been written about the importance of school leadership, but there is surprisingly little systematic evidence on this topic. This paper presents preliminary estimates of key elements of the market for school principals, employing rich panel data on principals from Texas State. The consideration of teacher movements across schools suggests…

  12. The Preliminaries of a Reference

    DEFF Research Database (Denmark)

    Butler, Graham; Sadl, Urska

    2017-01-01

    by the reasons why the Court after an oral hearing held in the presence of the parties and eight intervening Member States, and after hearing the Advocate General did not deliver one. The comment examines the legal framework, as well as the detailed procedural rules and guidelines that govern the cooperation...... of national courts in the preliminary reference procedure. It highlights the fact that preliminary references can only work when the preliminaries of a reference – the culture of sincere cooperation and litigation, efficient communication and flexible procedural rules – are in place....

  13. Airborne Crowd Density Estimation

    Science.gov (United States)

    Meynberg, O.; Kuschk, G.

    2013-10-01

    This paper proposes a new method for estimating human crowd densities from aerial imagery. Applications benefiting from an accurate crowd monitoring system are mainly found in the security sector. Normally crowd density estimation is done through in-situ camera systems mounted on high locations although this is not appropriate in case of very large crowds with thousands of people. Using airborne camera systems in these scenarios is a new research topic. Our method uses a preliminary filtering of the whole image space by suitable and fast interest point detection resulting in a number of image regions, possibly containing human crowds. Validation of these candidates is done by transforming the corresponding image patches into a low-dimensional and discriminative feature space and classifying the results using a support vector machine (SVM). The feature space is spanned by texture features computed by applying a Gabor filter bank with varying scale and orientation to the image patches. For evaluation, we use 5 different image datasets acquired by the 3K+ aerial camera system of the German Aerospace Center during real mass events like concerts or football games. To evaluate the robustness and generality of our method, these datasets are taken from different flight heights between 800 m and 1500 m above ground (keeping a fixed focal length) and varying daylight and shadow conditions. The results of our crowd density estimation are evaluated against a reference data set obtained by manually labeling tens of thousands individual persons in the corresponding datasets and show that our method is able to estimate human crowd densities in challenging realistic scenarios.

  14. Traditional Ecological Knowledge in Arctic EIA's

    DEFF Research Database (Denmark)

    Egede, Parnuna Petrina; Hansen, Anne Merrild

    2017-01-01

    The search for new oil and mineral reserves in the Arctic is increasing. This has called for both local and international concerns and opposition to the activities based on environmental apprehensions. Environmental Impact Assessments (EIA’s) have been implemented in legislations by the Arctic...

  15. Transboundary EIA in the Barents Region

    Directory of Open Access Journals (Sweden)

    Koivurova, Timo

    2014-12-01

    Full Text Available The article examines how transboundary environmental impact assessment (TEIA is organised in an area where international borders are close to each other, that is, in North Calotte/Kola Peninsula. It shows that a dense set of international legal obligations requires the region’s states to undertake TEIA. The paper examines the important question how TEIA can be done in an ideal manner in the region via the available best practise documents, such as the Guidelines for Environmental Impact Assessment in the Arctic document adopted by the predecessor of the Arctic Council, the Arctic Environmental Protection Strategy. Our argument is that best practises can be used in evaluating how individual cases are undertaken, such as the TEIA over the so-called Kaunisvaara project located in Pajala municipality (northern Sweden, close to the Finnish border (chapter 4. Our conclusion is that TEIA should be undertaken by the region’s nation-states by applying the main international TEIA convention, the so-called Espoo Convention, but also by adhering to the best practise documents that give guidance how to perform a TEIA in Arctic conditions.

  16. A PRELIMINARY JUPITER MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, W. B. [Lunar and Planetary Laboratory, The University of Arizona, Tucson, AZ 85721 (United States); Militzer, B. [Department of Earth and Planetary Science, Department of Astronomy, University of California, Berkeley, CA 94720 (United States)

    2016-03-20

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen–helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen–helium-rich envelope with approximately three times solar metallicity.

  17. Preliminary reference Earth model

    Science.gov (United States)

    Dziewonski, Adam M.; Anderson, Don L.

    1981-06-01

    A large data set consisting of about 1000 normal mode periods, 500 summary travel time observations, 100 normal mode Q values, mass and moment of inertia have been inverted to obtain the radial distribution of elastic properties, Q values and density in the Earth's interior. The data set was supplemented with a special study of 12 years of ISC phase data which yielded an additional 1.75 × 10 6 travel time observations for P and S waves. In order to obtain satisfactory agreement with the entire data set we were required to take into account anelastic dispersion. The introduction of transverse isotropy into the outer 220 km of the mantle was required in order to satisfy the shorter period fundamental toroidal and spheroidal modes. This anisotropy also improved the fit of the larger data set. The horizontal and vertical velocities in the upper mantle differ by 2-4%, both for P and S waves. The mantle below 220 km is not required to be anisotropic. Mantle Rayleigh waves are surprisingly sensitive to compressional velocity in the upper mantle. High S n velocities, low P n velocities and a pronounced low-velocity zone are features of most global inversion models that are suppressed when anisotropy is allowed for in the inversion. The Preliminary Reference Earth Model, PREM, and auxiliary tables showing fits to the data are presented.

  18. Arapahoe NWR diversion reconstruction : Preliminary

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a preliminary plan for a diversion reconstruction for Hubbard #2. Oklahoma #1, Dryer, Hill and Crowder sites on the Arapahoe National Wildlife Refuge.

  19. Short-term energy outlook: Quarterly projections, fourth quarter 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-14

    The Energy Information Administration (EIA) prepares quarterly short-term energy supply, demand, and price projections for printed publication in January, April, July, and October in the Short-Term Energy Outlook. The details of these projections, as well as monthly updates on or about the 6th of each interim month, are available on the internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. The forecast period for this issue of the Outlook extends from the fourth quarter of 1997 through the fourth quarter of 1998. Values for the fourth quarter of 1997, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the fourth quarter 1997 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. The STIFS model is driven principally by three sets of assumptions or inputs: estimates of key macroeconomic variables, world oil price assumptions, and assumptions about the severity of weather. 19 tabs.

  20. Estimating Utility

    DEFF Research Database (Denmark)

    Arndt, Channing; Simler, Kenneth R.

    2010-01-01

    an information-theoretic approach to estimating cost-of-basic-needs (CBN) poverty lines that are utility consistent. Applications to date illustrate that utility-consistent poverty measurements derived from the proposed approach and those derived from current CBN best practices often differ substantially......, with the current approach tending to systematically overestimate (underestimate) poverty in urban (rural) zones....

  1. 非球面人工晶状体度数计算的最优化%Preliminary evaluation of an algorithm to minimize the power error selection of an aspheric intraocular lens by optimizing the estimation of the corneal power and the effective lens position

    Institute of Scientific and Technical Information of China (English)

    DavidP Piero; VicenteJ Camps; MaraL Ramn; VernicaMateo; Roberto Soto-Negro

    2016-01-01

    目的::通过评价非球面人工晶状体( intraocular lens, IOL)屈光度的可预测性,初步开发一种计算屈光度( PIOL )的优化算法。方法:本研究纳入植入非球面 IOL ( LENTIS L-313, Oculentis GmbH)65眼,并分为2组:A组8例12眼,PIOL≥23.0D;B组35例53眼,PIOL<23.0D。术后3mo进行屈光度可预测性评价。参考角膜屈光力估计所致的可变性屈光指数计算出校正的IOL度数( PIOLadj )及屈光结果,根据年龄和解剖学因素得出校正的有效晶状体位置( adjusted effective lens position, ELPadj )。结果:术后A、B两组等效球镜度数分别为-0.75~+0.75 D、-1.38~+0.75D。 A、B两组的PIOLadj和实际晶状体屈光度(PIOLReal)之间无统计学差异(P=0.64、0.82)。 Bland-Altman分析显示A、B两组PIOLadj和PIOLReal之间的一致性区间分别为+1.11~-0.96 D和+1.14~-1.18 D。 Hoffer Q公式和Holladay I公式计算PIOLadj和PIOL之间存在临床和统计学上的显著差异(P<0.01)。结论:植入非球面IOL白内障手术的屈光可预测性可通过平行轴光学联合线性法则使角膜屈光力及晶状体位置相关误差最小化。%•AIM: To evaluate the refractive predictability achieved with an aspheric intraocular lens ( IOL ) and to develop a preliminary optimized algorithm for the calculation of its power ( PIOL ) .•METHODS:This study included 65 eyes implanted with the aspheric IOL LENTIS L-313 ( Oculentis GmbH ) that were divided into 2 groups:12 eyes (8 patients) with PIOL≥23. 0 D (group A), and 53 eyes (35 patients) with PIOL<23. 0 D ( group B ). The refractive predictability was evaluated at 3mo postoperatively. An adjusted IOL power ( PIOLadj ) was calculated considering a variable refractive index for corneal power estimation, the refractive outcome obtained, and an adjusted effective lens position ( ELPadj ) according to age and anatomical factors.•RESULTS: Postoperative spherical equivalent ranged from -0. 75 to +0. 75 D and from -1

  2. Ship design methodologies of preliminary design

    CERN Document Server

    Papanikolaou, Apostolos

    2014-01-01

    This book deals with ship design and in particular with methodologies of the preliminary design of ships. The book is complemented by a basic bibliography and five appendices with useful updated charts for the selection of the main dimensions and other basic characteristics of different types of ships (Appendix A), the determination of hull form  from the data of systematic hull form series (Appendix B), the detailed description of the relational method for the preliminary estimation of ship weights (Appendix C), a brief review of the historical evolution of shipbuilding science and technology from the prehistoric era to date (Appendix D) and finally a historical review of regulatory developments of ship's damage stability to date (Appendix E).  The book can be used as textbook for ship design courses or as additional reading for university or college students of naval architecture courses and related disciplines; it may also serve as a reference book for naval architects, practicing engineers of rel...

  3. Summary of Atlantic Coast Piping Plover Population Estimates, 1986 to 2001 and Preliminary 2002 Estimate

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The recovery plan for Piping Plover on Rhode Island discusses the current status of the species, habitat requirements and limiting factors, recovery objectives and...

  4. Standardized cost estimation for new technology (SCENT) - methodology and tool

    NARCIS (Netherlands)

    Ereev, S.Y.; Patel, M.K.

    2012-01-01

    This paper presents the development of a methodology and tool (called SCENT) to prepare preliminary economic estimates of the total production costs related to manufacturing in the process industries. The methodology uses the factorial approach – cost objects are estimated using factors and

  5. Title I preliminary engineering for: A. S. E. F. solid waste to methane gas

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-01-01

    An assignment to provide preliminary engineering of an Advanced System Experimental Facility for production of methane gas from urban solid waste by anaerobic digestion is documented. The experimental facility will be constructed on a now-existing solid waste shredding and landfill facility in Pompano Beach, Florida. Information is included on: general description of the project; justification of basic need; process design; preliminary drawings; outline specifications; preliminary estimate of cost; and time schedules for design and construction of accomplishment of design and construction. The preliminary cost estimate for the design and construction phases of the experimental program is $2,960,000, based on Dec. 1975 and Jan. 1976 costs. A time schedule of eight months to complete the Detailed Design, Equipment Procurement and the Award of Subcontracts is given.

  6. A Parametrical Transport Aircraft Fuselage Model for Preliminary Sizing and Beyond

    OpenAIRE

    Schwinn, Dominik; Kohlgrüber, Dieter; Scherer, Julian; Siemann, Martin

    2015-01-01

    Aircraft design generally comprises three consecutive phases: Conceptual, preliminary and detailed design phase. The preliminary design phase is of particular interest as the basic layout of the primary structure is defined. Up to date, semi-analytical methods are widely used in this design stage to estimate the structural mass. Although these methods lead to adequate results for the major aircraft components of standard configurations, the evaluation of new configurations (e.g. box wing, ble...

  7. Current Mooring Design in Partner WECs and Candidates for Preliminary Analysis

    DEFF Research Database (Denmark)

    Thomsen, Jonas Bjerg; Ferri, Francesco; Kofoed, Jens Peter

    This report is the combined report of Commercial Milestone "CM1: Design and Cost of Current Mooring Solutions of Partner WECs" and Milestone "M3: Mooring Solutions for Preliminary Analysis" of the EUDP project "Mooring Solutions for Large Wave Energy Converters". The report covers a description...... of the current mooring design of the partner Wave Energy Converter (WEC) developers in the project, together with a preliminary cost estimate of the systems....

  8. Short-term energy outlook, July 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The Energy Information Administration (EIA) prepares The Short-Term Energy Outlook (energy supply, demand, and price projections) monthly for distribution on the internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. In addition, printed versions of the report are available to subscribers in January, April, July and October. The forecast period for this issue of the Outlook extends from July 1998 through December 1999. Values for second quarter of 1998 data, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the July 1998 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. 28 figs., 19 tabs.

  9. Short-term energy outlook, July 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-01

    The Energy Information Administration (EIA) prepares The Short-Term Energy Outlook (energy supply, demand, and price projections) monthly for distribution on the internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. In addition, printed versions of the report are available to subscribers in January, April, July and October. The forecast period for this issue of the Outlook extends from July 1998 through December 1999. Values for second quarter of 1998 data, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the July 1998 version of the Short-Term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding. 28 figs., 19 tabs.

  10. Short-term energy outlook, October 1998. Quarterly projections, 1998 4. quarter

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Energy Information Administration (EIA) prepares The Short-Term Energy Outlook (energy supply, demand, and price projections) monthly for distribution on the Internet at: www.eia.doe.gov/emeu/steo/pub/contents.html. In addition, printed versions of the report are available to subscribers in January, April, July and October. The forecast period for this issue of the Outlook extends from October 1998 through December 1999. Values for third quarter of 1998 data, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in EIA`s Weekly Petroleum Status Report) or are calculated from model simulations that use the latest exogenous information available (for example, electricity sales and generation are simulated by using actual weather data). The historical energy data, compiled in the October 1998 version of the Short-term Integrated Forecasting System (STIFS) database, are mostly EIA data regularly published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications. Minor discrepancies between the data in these publications and the historical data in this Outlook are due to independent rounding.

  11. Fault Estimation

    DEFF Research Database (Denmark)

    Stoustrup, Jakob; Niemann, H.

    2002-01-01

    This paper presents a range of optimization based approaches to fault diagnosis. A variety of fault diagnosis prob-lems are reformulated in the so-called standard problem setup introduced in the literature on robust control. Once the standard problem formulations are given, the fault diagnosis pr...... problems can be solved by standard optimization tech-niques. The proposed methods include: (1) fault diagnosis (fault estimation, (FE)) for systems with model uncertainties; (2) FE for systems with parametric faults, and (3) FE for a class of nonlinear systems.......This paper presents a range of optimization based approaches to fault diagnosis. A variety of fault diagnosis prob-lems are reformulated in the so-called standard problem setup introduced in the literature on robust control. Once the standard problem formulations are given, the fault diagnosis...

  12. THE EFFECTS OF PRELIMINARY RULINGS

    Directory of Open Access Journals (Sweden)

    Iuliana-Mădălina LARION

    2015-07-01

    Full Text Available The study analyses the effects of the preliminary rulings rendered by the Court of Justice for the judicial body that made the reference and for other bodies dealing with similar cases, for the member states, for the European Union’ s institutions and for EU legal order. Starting from the binding effect of the preliminary judgment for national judicial bodies, which requires them to follow the ruling or make a new reference, to the lack of precedent doctrine in EU law, continuing with the possibility to indirectly verify the compatibility of national law of the member states with EU law and ending with the administrative or legislative measures that can or must be taken by the member states, the study intends to highlight the limits, nuances and consequences of the binding effect. It mentions the contribution of the national courts and of the Court of Justice of the European Union to the development of EU law, such as clarifying autonomous notions and it emphasizes the preliminary procedure's attributes of being a form of judicial protection of individual rights, as well as a means to review the legality of acts of EU institutions. The paper is meant to be a useful instrument for practitioners. Therefor, it also deals with the possibility and limits of asking new questions, in order to obtain reconsideration or a refinement of the legal issue and with the problem of judicial control over the interpretation and application of the preliminary ruling by the lower court.

  13. 45 CFR 150.217 - Preliminary determination.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Preliminary determination. 150.217 Section 150.217... Are Failing To Substantially Enforce HIPAA Requirements § 150.217 Preliminary determination. If, at... designees). (b) Notifies the State of CMS's preliminary determination that the State has failed to...

  14. Another look at the Grubbs estimators

    KAUST Repository

    Lombard, F.

    2012-01-01

    We consider estimation of the precision of a measuring instrument without the benefit of replicate observations on heterogeneous sampling units. Grubbs (1948) proposed an estimator which involves the use of a second measuring instrument, resulting in a pair of observations on each sampling unit. Since the precisions of the two measuring instruments are generally different, these observations cannot be treated as replicates. Very large sample sizes are often required if the standard error of the estimate is to be within reasonable bounds and if negative precision estimates are to be avoided. We show that the two instrument Grubbs estimator can be improved considerably if fairly reliable preliminary information regarding the ratio of sampling unit variance to instrument variance is available. Our results are presented in the context of the evaluation of on-line analyzers. A data set from an analyzer evaluation is used to illustrate the methodology. © 2011 Elsevier B.V.

  15. Preliminary experiments on quantification of skin condition

    Science.gov (United States)

    Kitajima, Kenzo; Iyatomi, Hitoshi

    2014-03-01

    In this study, we investigated a preliminary assessment method for skin conditions such as a moisturizing property and its fineness of the skin with an image analysis only. We captured a facial images from volunteer subjects aged between 30s and 60s by Pocket Micro (R) device (Scalar Co., Japan). This device has two image capturing modes; the normal mode and the non-reflection mode with the aid of the equipped polarization filter. We captured skin images from a total of 68 spots from subjects' face using both modes (i.e. total of 136 skin images). The moisture-retaining property of the skin and subjective evaluation score of the skin fineness in 5-point scale for each case were also obtained in advance as a gold standard (their mean and SD were 35.15 +/- 3.22 (μS) and 3.45 +/- 1.17, respectively). We extracted a total of 107 image features from each image and built linear regression models for estimating abovementioned criteria with a stepwise feature selection. The developed model for estimating the skin moisture achieved the MSE of 1.92 (μS) with 6 selected parameters, while the model for skin fineness achieved that of 0.51 scales with 7 parameters under the leave-one-out cross validation. We confirmed the developed models predicted the moisture-retaining property and fineness of the skin appropriately with only captured image.

  16. Cost and size estimates for an electrochemical bulk energy storage concept

    Science.gov (United States)

    Warshay, M.; Wright, L. O.

    1975-01-01

    Preliminary capital cost and size estimates were made for an electrochemical bulk energy storage concept for a redox-flow-cell system. Preliminary calculations showed that the redox-flow-cell system has great promise as a bulk energy storage system for power load leveling. The size of the system was estimated to be less than 2 percent of the size of a comparable pumped hydroelectric storage plant.

  17. Unbiased risk estimation method for covariance estimation

    CERN Document Server

    Lescornel, Hélène; Chabriac, Claudie

    2011-01-01

    We consider a model selection estimator of the covariance of a random process. Using the Unbiased Risk Estimation (URE) method, we build an estimator of the risk which allows to select an estimator in a collection of model. Then, we present an oracle inequality which ensures that the risk of the selected estimator is close to the risk of the oracle. Simulations show the efficiency of this methodology.

  18. Preliminaries

    Directory of Open Access Journals (Sweden)

    Desde el jardín de Freud

    2014-10-01

    Full Text Available Desde el Jardín de Freud se encuentra indexada en el IBN-Publindex (Colciencias, en categoría C, y en Latindex. También se encuentra en las siguientes bases de datos y catálogos: ebsco, Dialnet, Rebiun, Doaj y e-Revistas.

  19. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  20. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  1. Preliminary considerations concerning actinide solubilities

    Energy Technology Data Exchange (ETDEWEB)

    Newton, T.W.; Bayhurst, B.P.; Daniels, W.R.; Erdal, B.R.; Ogard, A.E.

    1980-01-01

    Work at the Los Alamos Scientific Laboratory on the fundamental solution chemistry of the actinides has thus far been confined to preliminary considerations of the problems involved in developing an understanding of the precipitation and dissolution behavior of actinide compounds under environmental conditions. Attempts have been made to calculate solubility as a function of Eh and pH using the appropriate thermodynamic data; results have been presented in terms of contour maps showing lines of constant solubility as a function of Eh and pH. Possible methods of control of the redox potential of rock-groundwater systems by the use of Eh buffers (redox couples) is presented.

  2. Preliminary pharmacognostic screening of Achyranthes coynei stem

    Directory of Open Access Journals (Sweden)

    Vinayak Upadhya

    2015-01-01

    Full Text Available Achyranthes coynei is a rare, endemic perennial shrub reported from Karnataka and Maharashtra states of India. The plant is used to treat various disorders by folk healers and was proven to have antimicrobial and antioxidant properties. The present study was undertaken to evaluate microscopic and macroscopic characters of A. coynei stem, along with its physicochemical parameters. ProgRes ® CapturePro and Microsoft Excel were used for statistical analysis. Perennial, shrubby nature and woody stem were the distinguishing morphological characters observed. Transverse section (TS illustrated quadrangular outline of the stem and showed the presence of two types of trichomes on the thick-walled epidermis. TS also showed number of rosette calcium oxalates crystals; prismatic and microsphenoid crystals; conjoint, collateral open secondary vascular bundles; and two amphixylic medullary bundles in the pith. Ash and extractive values, micro and macro elements and nutritive factors were estimated in the present study. The presence of alkaloids, saponins and triterpenoids were observed in preliminary phytochemical screening. High-performance thin layer chromatographic analysis yielded different bands and also indicated the presence of oleanolic acid. The studied parameters for A. coynei stem will be useful for identification and authentication of the plant material.

  3. MOLECULAR IDENTIFICATION AND GENOTYPING OF CIAUSCOLO AUTOCHTHONOUS MICROFLORA: PRELIMINARY STUDY

    Directory of Open Access Journals (Sweden)

    A. Petruzzelli

    2011-01-01

    Full Text Available The present study reports the results of a preliminary characterization of the bacterial population of Ciauscolo, a typical Italian fermented sausage, traditionally manufactured in Marche region. The bacterial community involved in Ciauscolo fermentation was investigated using both molecular and culturebased methods. The estimation of genotypic intra-species variation of the autochthonous bacteria isolated was also evaluated by using randomly amplified polymorphic DNA (RAPD analysis and unweighted pairgroup method with arithmetic averages (UPGMA cluster analysis. Our findings revealed an high diversity of the autochthonous bacterial population investigated, both at species and strain level.

  4. Preliminary assessment of fleets covered by the Energy Policy Act

    Energy Technology Data Exchange (ETDEWEB)

    Hu, P.S.; Davis, S.C.; Wang, M.Q. [and others

    1994-12-31

    To facilitate the goal of decreasing oil imports by 10 percent by the year 2000 and 30 percent by 2010, two sections of the Energy Policy Act encourage and mandate alternative fuel vehicles in the acquisition of fleet vehicles. The first step in estimating the contribution of these mandates toward meeting the aforementioned goal entails identifying affected fleets. This paper presents a preliminary assessment of potential vehicle fleet coverage. Only a limited number of companies in the methanol, ethanol, and hydrogen industries are likely to quality for this mandate. Whereas, many of the oil producers, petroleum refiners, and electricity companies are likely to be regulated.

  5. Preliminary Validation of a New Clinical Tool for Identifying Problem Video Game Playing

    Science.gov (United States)

    King, Daniel Luke; Delfabbro, Paul H.; Zajac, Ian T.

    2011-01-01

    Research has estimated that between 6 to 13% of individuals who play video games do so excessively. However, the methods and definitions used to identify "problem" video game players often vary considerably. This research presents preliminary validation data for a new measure of problematic video game play called the Problem Video Game Playing…

  6. Preliminary analysis of species partitioning in the DWPF melter. Sludge batch 7A

    Energy Technology Data Exchange (ETDEWEB)

    Choi, A. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Smith III, F. G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-01-01

    The work described in this report is preliminary in nature since its goal was to demonstrate the feasibility of estimating the off-gas carryover from the Defense Waste Processing Facility (DWPF) melter based on a simple mass balance using measured feed and glass pour stream (PS) compositions and time-averaged melter operating data over the duration of one canister-filling cycle.

  7. Preliminary design report for the K basins integrated water treatment system

    Energy Technology Data Exchange (ETDEWEB)

    Pauly, T.R., Westinghouse Hanford

    1996-08-12

    This Preliminary Design Report (PDR) provides a revised concept for the K Basins Integrated Water Treatment Systems (IWTS). This PDR incorporates the 11 recommendations made in a May 1996 Value Engineering session into the Conceptual Design, and provides new flow diagrams, hazard category assessment, cost estimate, and schedule for the IWTS Subproject.

  8. Preliminary Validation of a New Clinical Tool for Identifying Problem Video Game Playing

    Science.gov (United States)

    King, Daniel Luke; Delfabbro, Paul H.; Zajac, Ian T.

    2011-01-01

    Research has estimated that between 6 to 13% of individuals who play video games do so excessively. However, the methods and definitions used to identify "problem" video game players often vary considerably. This research presents preliminary validation data for a new measure of problematic video game play called the Problem Video Game…

  9. A LEVEL-VALUE ESTIMATION METHOD FOR SOLVING GLOBAL OPTIMIZATION

    Institute of Scientific and Technical Information of China (English)

    WU Dong-hua; YU Wu-yang; TIAN Wei-wen; ZHANG Lian-sheng

    2006-01-01

    A level-value estimation method was illustrated for solving the constrained global optimization problem. The equivalence between the root of a modified variance equation and the optimal value of the original optimization problem is shown. An alternate algorithm based on the Newton's method is presented and the convergence of its implementable approach is proved. Preliminary numerical results indicate that the method is effective.

  10. Topaz II preliminary safety assessment

    Science.gov (United States)

    Marshall, Albert C.; Standley, Vaughn; Voss, Susan S.; Haskin, Eric

    1993-01-01

    The Strategic Defense Initiative Organization (SDIO) decided to investigate the possibility of launching a Russian Topaz II space nuclear power system. A preliminary safety assessment was conducted to determine whether or not a space mission could be conducted safely and within budget constraints. As part of this assessment, a safety policy and safety functional requirements were developed to guide both the safety assessment and future Topaz II activities. A review of the Russian flight safety program was conducted and documented. Our preliminary safety assessment included a top level event tree, neutronic analysis of normal and accident configurations, an evaluation of temperature coefficients of reactivity, a reentry and disposal analysis, and analysis of postulated launch abort impact accidents, and an analysis of postulated propellant fire and explosion accidents. Based on the assessment, it appears that it will be possible to safely launch the Topaz II system in the U.S. with some possible system modifications. The principal system modifications will probably include design changes to preclude water flooded criticality and to assure intact reentry.

  11. Stability of EIA kits for determination of pertussis antigens and their application in the production process of pertussis vaccine%检测百日咳抗原的系列酶免疫测定试剂盒的稳定性及其在百日咳疫苗生产中的应用

    Institute of Scientific and Technical Information of China (English)

    潘殊男; 张霖阳; 王玲; 夏德菊; 王宇星; 肖詹蓉

    2014-01-01

    目的 评估检测百日咳毒素(pertussis toxin,PT)、丝状血凝素(filamentous haemagglutinin,FHA)和黏着素(pertactin,Prn)的3种酶免疫测定试剂盒的稳定性及其在无细胞百日咳疫苗(acellular pertussis vaccine,aPV)生产质量控制中的应用.方法 对3种酶免疫测定试剂盒进行热加速试验(37℃放置3 d)和长期稳定性试验(4℃放置6月),根据试剂盒的标准曲线相关系数、最高浓度标准品与阴性对照的吸光度值之比(P/N)值、质控品回收率评估试剂盒的稳定性.将3种试剂盒用于aPV生产的发酵、纯化、吸附阶段的PT、FHA、Prn定量检测,以确定3种试剂盒对aPV生产质量控制的可行性.结果 3种酶免疫测定试剂盒的37℃热加速试验和4℃长期稳定性试验的各项质量参数均符合相关要求.采用试剂盒定量各生产阶段的百日咳抗原含量显示:百日咳杆菌的发酵终点在第42~46 h;各3批PT、FHA和Prn组分液的纯化回收率分别为49.24%、56.12%和63.65%,68.75%、55.60%和49.76%、75.73%、60.63%和50.10%.采用单独吸附的铝佐剂抗原吸附率高于采用混合吸附,但单独和混合吸附方式制备的疫苗的效力无差异.结论 检测PT、FHA和Prn的3种酶免疫测定试剂盒具有良好的稳定性,可用于aPV生产的质量控制.%Objective To evaluate the stability of 3 kinds of EIA kits for detecting pertussis toxin (PT),filamentous haemagglutinin (FHA) and pertactin (Prn) and their application in the quality control of acellular pertussis vaccine (aPV) production.Methods The stability of EIA kits were evaluated by heat accelerated test (37 ℃ for 3 days) and long-term stability test (4 ℃ for 6 months),using the correlation coefficient of standard curve,the P/N value and the recovery of the quality control material.The contents of PT,FHA and Prn in the fermentation,purification and adsorption stages during the production process of aPV were detected by these 3 kinds

  12. Preliminary Design Report for the Yakima/Klickitat Production Project.

    Energy Technology Data Exchange (ETDEWEB)

    US Bonneville Power Administration

    1990-04-01

    A master plan for the Yakima/Klickitat Production Project (YKPP) was developed by the Northwest Power Planning Council (Council) on October 15, 1987, as a reasonable basis upon which the Bonneville Power Administration (BPA) could proceed to fund predesign work on the project. The Council approved the predesign work on the condition that eight preliminary tasks were completed. These tasks are: Task 1. Agreement on a refined statement of project goals. Task 2. Completion of a technical analysis of water supplies. Task 3. Completion of an experimental design plan. Task 4. Development of a harvest management plan. Task 5. Assessment of potential genetic risks. Task 6. Project coordination with all other affected parties. Task 7. Submission of a preliminary design report to the Council. Task 8. Develop a project management structure. The preliminary design report summarizes the work completed on these tasks. It provides a description of the preliminary design, engineering, and construction phases of project development, and gives an estimate of project costs. Also included is a description of other studies that were conducted to support YKPP planning. The results of studies conducted during the last 30 months indicate that hatchery facilities can be built in the Yakima and Klickitat subbasins to provide harvest benefits and to supplement natural production. Planning for the Yakima subbasin is at a more advanced stage of development than for the Klickitat subbasin because of greater availability of basic resource information. The information needed to proceed with final design and construction for the Klickitat subbasin will be available by 1992, as ongoing predesign work continues. This schedule is consistent with the anticipated phased completion of the YKPP by 1997.

  13. Liu Estimator Based on An M Estimator

    Directory of Open Access Journals (Sweden)

    Hatice ŞAMKAR

    2010-01-01

    Full Text Available Objective: In multiple linear regression analysis, multicollinearity and outliers are two main problems. In the presence of multicollinearity, biased estimation methods like ridge regression, Stein estimator, principal component regression and Liu estimator are used. On the other hand, when outliers exist in the data, the use of robust estimators reducing the effect of outliers is prefered. Material and Methods: In this study, to cope with this combined problem of multicollinearity and outliers, it is studied Liu estimator based on M estimator (Liu M estimator. In addition, mean square error (MSE criterion has been used to compare Liu M estimator with Liu estimator based on ordinary least squares (OLS estimator. Results: OLS, Huber M, Liu and Liu M estimates and MSEs of these estimates have been calculated for a data set which has been taken form a study of determinants of physical fitness. Liu M estimator has given the best performance in the data set. It is found as both MSE (?LM = 0.0078< MSE (?M = 0.0508 and MSE (?LM = 0.0078< MSE (?L= 0.0085. Conclusion: When there is both outliers and multicollinearity in a dataset, while using of robust estimators reduces the effect of outliers, it could not solve problem of multicollinearity. On the other hand, using of biased methods could solve the problem of multicollinearity, but there is still the effect of outliers on the estimates. In the occurence of both multicollinearity and outliers in a dataset, it has been shown that combining of the methods designed to deal with this problems is better than using them individually.

  14. 23 CFR 645.109 - Preliminary engineering.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Preliminary engineering. 645.109 Section 645.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS UTILITIES Utility Relocations, Adjustments, and Reimbursement § 645.109 Preliminary engineering. (a) As...

  15. 33 CFR 116.10 - Preliminary review.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Preliminary review. 116.10... ALTERATION OF UNREASONABLY OBSTRUCTIVE BRIDGES § 116.10 Preliminary review. (a) Upon receipt of a written complaint, the District Commander will review the complaint to determine if, in the District...

  16. Plutonium Immobilization Can Loading Preliminary Specifications

    Energy Technology Data Exchange (ETDEWEB)

    Kriikku, E.

    1998-11-25

    This report discusses the Plutonium Immobilization can loading preliminary equipment specifications and includes a process block diagram, process description, equipment list, preliminary equipment specifications, plan and elevation sketches, and some commercial catalogs. This report identifies loading pucks into cans and backfilling cans with helium as the top priority can loading development areas.

  17. 18 CFR 1b.6 - Preliminary investigations.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Preliminary investigations. 1b.6 Section 1b.6 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES RULES RELATING TO INVESTIGATIONS § 1b.6 Preliminary investigations....

  18. Preliminary deformation model for National Seismic Hazard map of Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Meilano, Irwan; Gunawan, Endra; Sarsito, Dina; Prijatna, Kosasih; Abidin, Hasanuddin Z. [Geodesy Research Division, Faculty of Earth Science and Technology, Institute of Technology Bandung (Indonesia); Susilo,; Efendi, Joni [Agency for Geospatial Information (BIG) (Indonesia)

    2015-04-24

    Preliminary deformation model for the Indonesia’s National Seismic Hazard (NSH) map is constructed as the block rotation and strain accumulation function at the elastic half-space. Deformation due to rigid body motion is estimated by rotating six tectonic blocks in Indonesia. The interseismic deformation due to subduction is estimated by assuming coupling on subduction interface while deformation at active fault is calculated by assuming each of the fault‘s segment slips beneath a locking depth or in combination with creeping in a shallower part. This research shows that rigid body motion dominates the deformation pattern with magnitude more than 15 mm/year, except in the narrow area near subduction zones and active faults where significant deformation reach to 25 mm/year.

  19. Preliminary Investigation of Sulfur Loading in Hanford LAW Glass

    Energy Technology Data Exchange (ETDEWEB)

    Vienna, John D.; Hrma, Pavel R.; Buchmiller, William C.; Ricklefs, Joel S.

    2004-04-01

    A preliminary estimate was developed for loading limits for high-sulfur low-activity waste (LAW) feeds that will be vitrified into borosilicate glass at the Hanford Site in the waste-cleanup effort. Previous studies reported in the literature were consulted to provide a basis for the estimate. The examination of previous studies led to questions about sulfur loading in Hanford LAW glass, and scoping tests were performed to help answer these questions. These results of these tests indicated that a formulation approach developed by Vienna and colleagues shows promise for maximizing LAW loading in glass. However, there is a clear need for follow-on work. The potential for significantly lowering the amount of LAW glass produced at Hanford (after the initial phase of processing) because of higher sulfur tolerances may outweigh the cost and effort required to perform the necessary testing.

  20. KALIMER preliminary conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kim, Y. J.; Kim, Y. G. and others

    2000-08-01

    This report, which summarizes the result of preliminary conceptual design activities during Phase 1, follows the format of safety analysis report. The purpose of publishing this report is to gather all of the design information developed so far in a systematic way so that KALIMER designers have a common source of the consistent design information necessary for their future design activities. This report will be revised and updated as design changes occur and more detailed design specification is developed during Phase 2. Chapter 1 describes the KALIMER Project. Chapter 2 includes the top level design requirements of KALIMER and general plant description. Chapter 3 summarizes the design of structures, components, equipment and systems. Specific systems and safety analysis results are described in the remaining chapters. Appendix on the HCDA evaluation is attached at the end of this report.

  1. Preliminary hazards analysis -- vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

  2. Preliminary risk benefit assessment for nuclear waste disposal in space

    Science.gov (United States)

    Rice, E. E.; Denning, R. S.; Friedlander, A. L.; Priest, C. C.

    1982-01-01

    This paper describes the recent work of the authors on the evaluation of health risk benefits of space disposal of nuclear waste. The paper describes a risk model approach that has been developed to estimate the non-recoverable, cumulative, expected radionuclide release to the earth's biosphere for different options of nuclear waste disposal in space. Risk estimates for the disposal of nuclear waste in a mined geologic repository and the short- and long-term risk estimates for space disposal were developed. The results showed that the preliminary estimates of space disposal risks are low, even with the estimated uncertainty bounds. If calculated release risks for mined geologic repositories remain as low as given by the U.S. DOE, and U.S. EPA requirements continue to be met, then no additional space disposal study effort in the U.S. is warranted at this time. If risks perceived by the public are significant in the acceptance of mined geologic repositories, then consideration of space disposal as a complement to the mined geologic repository is warranted.

  3. Estimating tail probabilities

    Energy Technology Data Exchange (ETDEWEB)

    Carr, D.B.; Tolley, H.D.

    1982-12-01

    This paper investigates procedures for univariate nonparametric estimation of tail probabilities. Extrapolated values for tail probabilities beyond the data are also obtained based on the shape of the density in the tail. Several estimators which use exponential weighting are described. These are compared in a Monte Carlo study to nonweighted estimators, to the empirical cdf, to an integrated kernel, to a Fourier series estimate, to a penalized likelihood estimate and a maximum likelihood estimate. Selected weighted estimators are shown to compare favorably to many of these standard estimators for the sampling distributions investigated.

  4. Preliminary Report: Analysis of the baseline study on the prevalence of Salmonella in laying hen flocks of Gallus gallus

    DEFF Research Database (Denmark)

    Hald, Tine

    This is a preliminary report on the analysis of the Community-wide baseline study to estimate the prevalence of Salmonella in laying hen flocks. It is being published pending the full analysis of the entire dataset from the baseline study. The report contains the elements necessary for the establ......This is a preliminary report on the analysis of the Community-wide baseline study to estimate the prevalence of Salmonella in laying hen flocks. It is being published pending the full analysis of the entire dataset from the baseline study. The report contains the elements necessary...

  5. Births: preliminary data for 2012.

    Science.gov (United States)

    Hamilton, Brady E; Martin, Joyce A; Ventura, Stephanie J

    2013-09-01

    Objectives-This report presents preliminary data for 2012 on births in the United States. U.S. data on births are shown by age, live-birth order, race, and Hispanic origin of mother. Data on marital status, cesarean delivery, preterm births, and low birthweight are also presented. Methods-Data in this report are based on 99.96% of 2012 births.Records for the few states with less than 100% of records received are weighted to independent control counts of all births received in state vital statistics offices in 2012. Comparisons are made with final 2011 data. Results-The preliminary number of births for the United States in 2012 was 3,952,937, essentially unchanged (not statistically significant) from 2011; the general fertility rate was 63.0 births per 1,000 women aged 15-44, down only slightly from 2011, after declining nearly 3% a year from 2007 through 2010. The number of births and fertility rate either declined or were unchanged for most race and Hispanic origin groups from 2011 to 2012; however, both the number of births and the fertility rate for Asian or Pacific Islander women rose in 2012 (7% and 4%, respectively). The birth rate for teenagers aged 15-19 was down 6% in 2012 (29.4 births per 1,000 teenagers aged 15-19), yet another historic low for the United States, with rates declining for younger and older teenagers and for nearly all race and Hispanic origin groups. The birth rate for women in their early 20s also declined in 2012, to a new record low of 83.1 births per 1,000 women. Birth rates for women in their 30s rose in 2012, as did the birth rate for women in their early 40s. The birth rate for women in their late 40s was unchanged. The nonmarital birth rate declined in 2012 (to 45.3 birth per 1,000 unmarried women aged 15-44), whereas the number of births to unmarried women rose 1% and the percentage of births to unmarried women was unchanged (at 40.7%). The cesarean delivery rate for the United States was unchanged in 2012 at 32.8%. The preterm

  6. Youth Voter Turnout 1992 to 2004: Estimates from Exit Polls. CIRCLE Fact Sheet.

    Science.gov (United States)

    Center for Information and Research on Civic Learning and Engagement, 2005

    2005-01-01

    CIRCLE has issued two releases estimating youth turnout in the 2004 presidential election. The first release was issued on November 3rd and provided the earliest turnout estimates based on National Election Pool (NEP) state and national exit polls and a preliminary vote count. The second was a Fact Sheet released on November 8th which provided…

  7. A Preliminary View on the Estimation of Land Surface Temperature Under Cloud Cover from Thermal Remote Sensing Data%热红外遥感图像中云覆盖像元地表温度估算初论

    Institute of Scientific and Technical Information of China (English)

    周义; 覃志豪; 包刚

    2013-01-01

    Land surface temperature (LST) is a very important parameter controlling the energy and water balance between atmosphere and land surface. Since it is difficult to obtain such information from ground-based measurements, it appears to be very attractive by using satellite thermal infrared measurements to estimate LST since it can be used for estimating surface temperature at global or local scale. Moreover, the estimation of LST by using satellite remote sensing data is feasible. Cloud cover is a major obstacle to thermal infrared remote sensing applications and remote sensing quantitative retrieval of land surface temperature. Furthermore, cloud frequently exists in most time and covers roughly half the surface of the Earth even if the sky is clear. This is the case especially in some regions of high latitudes in the north hemisphere, e.g. the tropics are covered by cloud for about 60% of the time. Therefore, the influence of clouds on LST deserves more discussion and how to estimate LST of pixels covered by cloud on thermal remotely sensed imagery is one of the cutting-edge research problems. In this article, based on the theory of surface energy balance (SEB), three methods, which are spatial interpretation adjustment method, the adjustment method by correlations between LST and Vegetation Indices (VIs) and improved surface energy balance method, have been put forward for the estimation of LST when the sky is cloudy. Moreover, the lowland effect of LST spatial distribution under cloud cover and the method for the calculation of its intensity (denoted as SE) were also discussed. Generally speaking, when SE equals to 1, it means that SE reaches its maximum due to thick cloud cover .While SE equals to 0, it means that there is no lowland effect in clear sky. SE is strongly affected by the cloud and surface conditions. That is to say, SE is influenced greatly by cloud properties such as the time it appears and lasts, its shape, thickness and height and surface

  8. Preliminary evaluation capability for some two-dimensional groundwater contamination problems

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, R.W.; Schur, J.A.

    1978-06-01

    There are a variety of two-dimensional groundwater pollution problems where a preliminary evaluation of containment tansport is needed. A common difficulty in making this first assessment is the meager field data usually available. A preliminary evaluation capability has been developed for two-dimensional contamination problems that is consistent with the limited data initially available. Idealizations and simplifications have been introduced with special care so that worst-case final estimates will be provided. The preliminary evaluation results are produced using interactive computer programs that utilize self-help or coaching features for the user's convenience. The self-help programs aid the user by asking for the necessary input parameters and by guiding the user, in selecting the options needed to obtain the required results.

  9. Preliminary Iron Distribution on Vesta

    Science.gov (United States)

    Mittlefehldt, David W.; Mittlefehldt, David W.

    2013-01-01

    The distribution of iron on the surface of the asteroid Vesta was investigated using Dawn's Gamma Ray and Neutron Detector (GRaND) [1,2]. Iron varies predictably with rock type for the howardite, eucrite, and diogenite (HED) meteorites, thought to be representative of Vesta. The abundance of Fe in howardites ranges from about 12 to 15 wt.%. Basaltic eucrites have the highest abundance, whereas, lower crustal and upper mantle materials (cumulate eucrites and diogenites) have the lowest, and howardites are intermediate [3]. We have completed a mapping study of 7.6 MeV gamma rays produced by neutron capture by Fe as measured by the bismuth germanate (BGO) detector of GRaND [1]. The procedures to determine Fe counting rates are presented in detail here, along with a preliminary distribution map, constituting the necessary initial step to quantification of Fe abundances. We find that the global distribution of Fe counting rates is generally consistent with independent mineralogical and compositional inferences obtained by other instruments on Dawn such as measurements of pyroxene absorption bands by the Visual and Infrared Spectrometer (VIR) [4] and Framing Camera (FC) [5] and neutron absorption measurements by GRaND [6].

  10. EUPORIAS: plans and preliminary results

    Science.gov (United States)

    Buontempo, C.

    2013-12-01

    Recent advances in our understanding and ability to forecast climate variability have meant that skilful predictions are beginning to be routinely made on seasonal to decadal (s2d) timescales. Such forecasts have the potential to be of great value to a wide range of decision-making, where outcomes are strongly influenced by variations in the climate. In 2012 the European Commission funded EUPORIAS, a four year long project to develop prototype end-to-end climate impact prediction services operating on a seasonal to decadal timescale, and assess their value in informing decision-making. EUPORIAS commenced on 1 November 2012, coordinated by the UK Met Office leading a consortium of 24 organisations representing world-class European climate research and climate service centres, expertise in impacts assessments and seasonal predictions, two United Nations agencies, specialists in new media, and commercial companies in climate-vulnerable sectors such as energy, water and tourism. The poster describes the setup of the project, its main outcome and some of the very preliminary results.

  11. Preliminary results of ANAIS-25

    CERN Document Server

    Amaré, J; Cuesta, C; García, E; Ginestra, C; Martínez, M; Oliván, M A; Ortigoza, Y; de Solórzano, A Ortiz; Pobes, C; Puimedón, J; Sarsa, M L; Villar, P; Villar, J A

    2013-01-01

    The ANAIS (Annual Modulation with NaI(Tl) Scintillators) experiment aims at the confirmation of the DAMA/LIBRA signal using the same target and technique at the Canfranc Underground Laboratory. 250 kg of ultrapure NaI(Tl) crystals will be used as a target, divided into 20 modules, each coupled to two photomultipliers. Two NaI(Tl) crystals of 12.5 kg each, grown by Alpha Spectra from a powder having a potassium level under the limit of our analytical techniques, form the ANAIS-25 set-up. The background contributions are being carefully studied and preliminary results are presented: their natural potassium content in the bulk has been quantified, as well as the uranium and thorium radioactive chains presence in the bulk through the discrimination of the corresponding alpha events by PSA, and due to the fast commissioning, the contribution from cosmogenic activated isotopes is clearly identified and their decay observed along the first months of data taking. Following the procedures established with ANAIS-0 and ...

  12. Stardust Interstellar Preliminary Examination (ISPE)

    Science.gov (United States)

    Westphal, A. J.; Allen, C.; Bajt, S.; Basset, R.; Bastien, R.; Bechtel, H.; Bleuet, P.; Borg, J.; Brenker F.; Bridges, J.

    2009-01-01

    In January 2006 the Stardust sample return capsule returned to Earth bearing the first solid samples from a primitive solar system body, C omet 81P/Wild2, and a collector dedicated to the capture and return o f contemporary interstellar dust. Both collectors were approximately 0.1m(exp 2) in area and were composed of aerogel tiles (85% of the co llecting area) and aluminum foils. The Stardust Interstellar Dust Col lector (SIDC) was exposed to the interstellar dust stream for a total exposure factor of 20 m(exp 2-) day during two periods before the co metary encounter. The Stardust Interstellar Preliminary Examination ( ISPE) is a three-year effort to characterize the collection using no ndestructive techniques. The ISPE consists of six interdependent proj ects: (1) Candidate identification through automated digital microsco py and a massively distributed, calibrated search (2) Candidate extr action and photodocumentation (3) Characterization of candidates thro ugh synchrotronbased FourierTranform Infrared Spectroscopy (FTIR), S canning XRay Fluoresence Microscopy (SXRF), and Scanning Transmission Xray Microscopy (STXM) (4) Search for and analysis of craters in f oils through FESEM scanning, Auger Spectroscopy and synchrotronbased Photoemission Electron Microscopy (PEEM) (5) Modeling of interstell ar dust transport in the solar system (6) Laboratory simulations of h ypervelocity dust impacts into the collecting media

  13. Preliminary Earthquake Hazard Map of Afghanistan

    Science.gov (United States)

    Boyd, Oliver S.; Mueller, Charles S.; Rukstales, Kenneth S.

    2007-01-01

    . Deformation here is expressed as a belt of major, north-northeast-trending, left-lateral strike-slip faults and abundant seismicity. The seismicity intensifies farther to the northeast and includes a prominent zone of deep earthquakes associated with northward subduction of the Indian plate beneath Eurasia that extends beneath the Hindu Kush and Pamirs Mountains. Production of the seismic hazard maps is challenging because the geological and seismological data required to produce a seismic hazard model are limited. The data that are available for this project include historical seismicity and poorly constrained slip rates on only a few of the many active faults in the country. Much of the hazard is derived from a new catalog of historical earthquakes: from 1964 to the present, with magnitude equal to or greater than about 4.5, and with depth between 0 and 250 kilometers. We also include four specific faults in the model: the Chaman fault with an assigned slip rate of 10 mm/yr, the Central Badakhshan fault with an assigned slip rate of 12 mm/yr, the Darvaz fault with an assigned slip rate of 7 mm/yr, and the Hari Rud fault with an assigned slip rate of 2 mm/yr. For these faults and for shallow seismicity less than 50 km deep, we incorporate published ground-motion estimates from tectonically active regions of western North America, Europe, and the Middle East. Ground-motion estimates for deeper seismicity are derived from data in subduction environments. We apply estimates derived for tectonic regions where subduction is the main tectonic process for intermediate-depth seismicity between 50- and 250-km depth. Within the framework of these limitations, we have developed a preliminary probabilistic seismic-hazard assessment of Afghanistan, the type of analysis that underpins the seismic components of modern building codes in the United States. The assessment includes maps of estimated peak ground-acceleration (PGA), 0.2-second spectral acceleration (SA), and 1.0-secon

  14. Temporal evolution of risk estimates for presumed human teratogens.

    Science.gov (United States)

    Koebert, M K; Haun, J M; Pauli, R M

    1993-01-01

    We present preliminary data assessing a previously untried method of deriving estimates of risk from case reports on presumed human teratogens. We postulated that we could take advantage of biases inherent to case reports in order to generate one or more families of temporal curves that could be used to estimate the "true" risk of teratogenic exposure. Using this method (which we refer to as the "case-cumulative method") we found that two agents (parvovirus B19 and isotretinoin) demonstrated a logarithmic decrease in the estimated risk over time, as intuitively expected, while trimethadione and the coumarin derivatives showed a more complex pattern over time. Analysis of estimated risks quoted by reviews and large studies for these four agents showed large variability from estimate to estimate and no discernible temporal pattern. With further analysis of other agents, the case-cumulative method might eventually prove to be useful in teratogen counseling.

  15. Preliminary investigation into the possible endocrine disrupting ...

    African Journals Online (AJOL)

    JTEkanem

    In this study, we quantified the effect of Bonny- light crude oil contaminated diet ... This preliminary result suggest that Bonny-Light crude oil may have the potential .... different components. Its exploration ... organisms found in crude oil polluted.

  16. 42 CFR 457.925 - Preliminary investigation.

    Science.gov (United States)

    2010-10-01

    ... (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Program Integrity § 457.925 Preliminary investigation. If the State agency receives a complaint of fraud or abuse...

  17. Preliminary design data package. Appendix C

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-25

    The design requirements, design philosophy, method and assumptions, and preliminary computer-aided design of the Near-Term Hybrid Vehicle including its electric and heat power units, control equipment, transmission system, body, and overall vehicle characteristics are presented. (LCL)

  18. Preliminary project proposal : Missouri chutes, NE & IA

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This proposal is for the Missouri Chutes National Wildlife Refuge that would be in Nebraska and Iowa on the Missouri River. This preliminary project proposal focuses...

  19. Preliminary Survey of Ectoparasites Infesting Chickens (Gallus ...

    African Journals Online (AJOL)

    Preliminary Survey of Ectoparasites Infesting Chickens (Gallus domesticus) in. Four Areas of ... were identified with the following prevalences: the shaft louse, Menopon gallinae (8.1%), the chicken ..... Canis lupus familiaris in Mueang district ...

  20. Renewable Energy Park - Preliminary Feasibility & Engineering Report

    Energy Technology Data Exchange (ETDEWEB)

    Ariwite, Roderick [Fallon Paiute Shoshone Tribe, NV (United States)

    2015-07-31

    This "Renewable Energy Park - Preliminary Feasibility & Engineering Report" seeks to provide an overall assessment and review of renewable energy development opportunities on the Fallon Indian Reservation and Colony Lands.

  1. Preliminary Determination of Epicenters (PDE) Bulletin

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The NEIC global earthquake bulletin is called the Preliminary Determination of Epicenters or PDE, and is one of many discrete products in the ANSS Comprehensive...

  2. Alaska gold rush trails study: Preliminary draft

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Preliminary study draft, with maps, of seven gold rush trails in Alaska, to determine suitability for inclusion in the National Scenic Trails system and their...

  3. Variation of TEC and related parameters over the Indian EIA region from ground and space based GPS observations during the low solar activity period of May 2007-April 2008

    Science.gov (United States)

    Chakravarty, S. C.; Nagaraja, Kamsali; Jakowski, N.

    2017-03-01

    The annual variations of ionospheric Total Electron Content (TEC), F-region peak ionisation (NmF2) and the ionospheric slab thickness (τ) over the Indian region during the low solar activity period of May 2007-April 2008 have been studied. For this purpose the ground based TEC data obtained from GAGAN measurements and the space based data from GPS radio occultation technique using CHAMP have been utilised. The results of these independent measurements are combined to derive additional parameters such as the equivalent slab thickness of the total and the bottom-side ionospheric regions (τT and τB). The one year hourly average values of all these parameters over the ionospheric anomaly latitude region (10-26°N) are presented here along with the statistical error estimates. It is expected that these results are potentially suited to be used as base level values during geomagnetically quiet and undisturbed solar conditions.

  4. Preliminary organizational culture scale focused on artifacts.

    Science.gov (United States)

    Bonavia, Tomas

    2006-12-01

    In this preliminary study, an Organizational Culture Scale was developed to assess cultural artifacts according to Schein's typology (1985). It includes a set of cultural artifacts to measure the extent to which an organization is more or less traditional. A total of 249 managers from a range of different companies responded to the items. Preliminary analysis yielded a one-dimensional scale with 14 items with high internal consistency and homogeneity.

  5. Preliminary organizational culture scale focused on artifacts

    OpenAIRE

    Bonavia, Tomas

    2006-01-01

    In this preliminary study, an organizational culture scale was developed to assess cultural artifacts according to Schein´s typology (1985). It includes a set of cultural artifacts to measure the extent to which an organization is more or less traditional. A total of 249 managers from a range of different companies responded to the items. Preliminary analysis yielded a one-dimensional scale with 14 items with high internal consistency and homogeneity.

  6. A Survey of Cost Estimating Methodologies for Distributed Spacecraft Missions

    Science.gov (United States)

    Foreman, Veronica L.; Le Moigne, Jacqueline; de Weck, Oliver L.

    2016-01-01

    Satellite constellations and Distributed Spacecraft Mission (DSM) architectures offer unique benefits to Earth observation scientists and unique challenges to cost estimators. The Cost and Risk (CR) module of the Tradespace Analysis Tool for Constellations (TAT-C) being developed by NASA Goddard seeks to address some of these challenges by providing a new approach to cost modeling, which aggregates existing Cost Estimating Relationships (CER) from respected sources, cost estimating best practices, and data from existing and proposed satellite designs. Cost estimation through this tool is approached from two perspectives: parametric cost estimating relationships and analogous cost estimation techniques. The dual approach utilized within the TAT-C CR module is intended to address prevailing concerns regarding early design stage cost estimates, and offer increased transparency and fidelity by offering two preliminary perspectives on mission cost. This work outlines the existing cost model, details assumptions built into the model, and explains what measures have been taken to address the particular challenges of constellation cost estimating. The risk estimation portion of the TAT-C CR module is still in development and will be presented in future work. The cost estimate produced by the CR module is not intended to be an exact mission valuation, but rather a comparative tool to assist in the exploration of the constellation design tradespace. Previous work has noted that estimating the cost of satellite constellations is difficult given that no comprehensive model for constellation cost estimation has yet been developed, and as such, quantitative assessment of multiple spacecraft missions has many remaining areas of uncertainty. By incorporating well-established CERs with preliminary approaches to approaching these uncertainties, the CR module offers more complete approach to constellation costing than has previously been available to mission architects or Earth

  7. LISA parameter estimation using numerical merger waveforms

    Energy Technology Data Exchange (ETDEWEB)

    Thorpe, J I; McWilliams, S T; Kelly, B J; Fahey, R P; Arnaud, K; Baker, J G, E-mail: James.I.Thorpe@nasa.go [NASA Goddard Space Flight Center, 8800 Greenbelt Rd, Greenbelt, MD 20771 (United States)

    2009-05-07

    Recent advances in numerical relativity provide a detailed description of the waveforms of coalescing massive black hole binaries (MBHBs), expected to be the strongest detectable LISA sources. We present a preliminary study of LISA's sensitivity to MBHB parameters using a hybrid numerical/analytic waveform for equal-mass, non-spinning holes. The Synthetic LISA software package is used to simulate the instrument response, and the Fisher information matrix method is used to estimate errors in the parameters. Initial results indicate that inclusion of the merger signal can significantly improve the precision of some parameter estimates. For example, the median parameter errors for an ensemble of systems with total redshifted mass of 10{sup 6} M{sub o-dot} at a redshift of z approx 1 were found to decrease by a factor of slightly more than two for signals with merger as compared to signals truncated at the Schwarzchild ISCO.

  8. LISA parameter estimation using numerical merger waveforms

    CERN Document Server

    Thorpe, J I; Kelly, B J; Fahey, R P; Arnaud, K; Baker, J G

    2008-01-01

    Recent advances in numerical relativity provide a detailed description of the waveforms of coalescing massive black hole binaries (MBHBs), expected to be the strongest detectable LISA sources. We present a preliminary study of LISA's sensitivity to MBHB parameters using a hybrid numerical/analytic waveform for equal-mass, non-spinning holes. The Synthetic LISA software package is used to simulate the instrument response and the Fisher information matrix method is used to estimate errors in the parameters. Initial results indicate that inclusion of the merger signal can significantly improve the precision of some parameter estimates. For example, the median parameter errors for an ensemble of systems with total redshifted mass of one million Solar masses at a redshift of one were found to decrease by a factor of slightly more than two for signals with merger as compared to signals truncated at the Schwarzchild ISCO.

  9. Estimations of Coherent Instabilities for JLEIC

    Energy Technology Data Exchange (ETDEWEB)

    Li, Rui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2017-05-01

    JLEIC is the medium energy electron-ion collider currently under active design at Jefferson Lab*. The design goals of JLEIC are both high luminosity (1033-1034 cm-2ses-1) and high polarization (>70%) for the electron and light ion beams, for a wide range of electron and ion beam energies and for a wide spectrum of ion species. The unprecedented luminosity goal for this electron-ion collider sets strong requirements for the understanding and management of potential collective effects in JLEIC. In this paper, we present preliminary estimations of single and coupled bunch coherent instabilities for the electron and proton beams at collision energies for the JLEIC design. Further improvement of the estimations and mitigation methods are discussed.

  10. Bootstrap Estimation for Nonparametric Efficiency Estimates

    OpenAIRE

    1995-01-01

    This paper develops a consistent bootstrap estimation procedure to obtain confidence intervals for nonparametric measures of productive efficiency. Although the methodology is illustrated in terms of technical efficiency measured by output distance functions, the technique can be easily extended to other consistent nonparametric frontier models. Variation in estimated efficiency scores is assumed to result from variation in empirical approximations to the true boundary of the production set. ...

  11. PRELIMINARY ACCOUNTING WORKS FOR THE ESTABLISHMENT OF FINANCIAL STATEMENTS

    Directory of Open Access Journals (Sweden)

    HOLT GHEORGHE

    2017-02-01

    Full Text Available The preparation of financial statements is a complex process of aggregation of data and accounting information in the perspective of establishing economic and financial indicators. The adoption of a uniform set of preliminary accounting work for the closure of the current financial exercises is the only way for romanian companies to ensure that their financial situations are reliable, and on this basis, the users can make the best decisions. According to IASB Framework, the objective of financial statements is to provide information about the financial position, performance and changes in financial position of an enterprise that is useful to a wide range of users in making economic decisions: managers, shareholders, prospective investors, financial institutions, suppliers, customers, employees, competitors, general public, governments. The complexity of the accounting works preceding the financial statement preparation is determined by the large volume of theoretical and practical knowledge that can be influenced by the following factors: different accounting policies, accounting estimates, professional judgment, verifiability, measurability, fraud and error. The main objective of this scientific paper is to highlight the importance of preliminary accounting works for the annual financial statements establisment, focusing on the presentation of their chronological evidence.

  12. Preliminary Economics for Hydrocarbon Fuel Production from Cellulosic Sugars

    Energy Technology Data Exchange (ETDEWEB)

    Collett, James R.; Meyer, Pimphan A.; Jones, Susanne B.

    2014-05-18

    Biorefinery process and economic models built in CHEMCAD and a preliminary, genome-scale metabolic model for the oleaginous yeast Lipomyces starkeyi were used to simulate the bioconversion of corn stover to lipids, and the upgrading of these hydrocarbon precursors to diesel and jet fuel. The metabolic model was based on the recently released genome sequence for L. starkeyi and on metabolic pathway information from the literature. The process model was based on bioconversion, lipid extraction, and lipid oil upgrading data found in literature, on new laboratory experimental data, and on yield predictions from the preliminary L. starkeyi metabolic model. The current plant gate production cost for a distillate-range hydrocarbon fuel was estimated by the process model Base Case to be $9.5/gallon ($9.0 /gallon of gasoline equivalent) with assumptions of 2011$, 10% internal return on investment, and 2205 ton/day dry feed rate. Opportunities for reducing the cost to below $5.0/gallon, such as improving bioconversion lipid yield and hydrogenation catalyst selectivity, are presented in a Target Case. The process and economic models developed for this work will be updated in 2014 with new experimental data and predictions from a refined metabolic network model for L. starkeyi. Attaining a production cost of $3.0/gallon will require finding higher value uses for lignin other than power generation, such as conversion to additional fuel or to a co-product.

  13. 煤炭矿区总体规划环境影响评价指标体系构建研究--以榆林市古城矿区为例%Study of Establishing Evaluation Index System of EIA in Coal Mining Areas-A Case Study of Gucheng Coal mining Areas in Yulin City

    Institute of Scientific and Technical Information of China (English)

    石缎花

    2013-01-01

      以古城矿区总体规划环评为例,分析了矿区所在地的生态环境特点,对古城矿区开发进行了环境影响识别,进而确定了矿区开发的主要资源环境限制因子,从自然环境、社会环境和经济环境三方面构建了古城矿区总体规划环评的指标体系。%Taking the directional rules of environmental evaluation for planning of the coal mining areas and relevant law s and regulations as the criteria ,this article analyzes the features of ecological environment of the coal mining areas and conducts the assessment of the influences of development of Gucheng coal mining area on the environment ,thereby confirming the limited environmental factors for the development of this area . And then the article establishes the index system of environmental impact assessment (EIA) of overall plan-ning of Gucheng coal mining area from three aspects of natural ,social and economic environment .

  14. Software Cost Estimation Review

    OpenAIRE

    Ongere, Alphonce

    2013-01-01

    Software cost estimation is the process of predicting the effort, the time and the cost re-quired to complete software project successfully. It involves size measurement of the soft-ware project to be produced, estimating and allocating the effort, drawing the project schedules, and finally, estimating overall cost of the project. Accurate estimation of software project cost is an important factor for business and the welfare of software organization in general. If cost and effort estimat...

  15. Making Connections with Estimation.

    Science.gov (United States)

    Lobato, Joanne E.

    1993-01-01

    Describes four methods to structure estimation activities that enable students to make connections between their understanding of numbers and extensions of those concepts to estimating. Presents activities that connect estimation with other curricular areas, other mathematical topics, and real-world applications. (MDH)

  16. Estimation of genome length

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The genome length is a fundamental feature of a species. This note outlined the general concept and estimation method of the physical and genetic length. Some formulae for estimating the genetic length were derived in detail. As examples, the genome genetic length of Pinus pinaster Ait. and the genetic length of chromosome Ⅵ of Oryza sativa L. were estimated from partial linkage data.

  17. ERIS: preliminary design phase overview

    Science.gov (United States)

    Kuntschner, Harald; Jochum, Lieselotte; Amico, Paola; Dekker, Johannes K.; Kerber, Florian; Marchetti, Enrico; Accardo, Matteo; Brast, Roland; Brinkmann, Martin; Conzelmann, Ralf D.; Delabre, Bernard A.; Duchateau, Michel; Fedrigo, Enrico; Finger, Gert; Frank, Christoph; Rodriguez, Fernando G.; Klein, Barbara; Knudstrup, Jens; Le Louarn, Miska; Lundin, Lars; Modigliani, Andrea; Müller, Michael; Neeser, Mark; Tordo, Sebastien; Valenti, Elena; Eisenhauer, Frank; Sturm, Eckhard; Feuchtgruber, Helmut; George, Elisabeth M.; Hartl, Michael; Hofmann, Reiner; Huber, Heinrich; Plattner, Markus P.; Schubert, Josef; Tarantik, Karl; Wiezorrek, Erich; Meyer, Michael R.; Quanz, Sascha P.; Glauser, Adrian M.; Weisz, Harald; Esposito, Simone; Xompero, Marco; Agapito, Guido; Antichi, Jacopo; Biliotti, Valdemaro; Bonaglia, Marco; Briguglio, Runa; Carbonaro, Luca; Cresci, Giovanni; Fini, Luca; Pinna, Enrico; Puglisi, Alfio T.; Quirós-Pacheco, Fernando; Riccardi, Armando; Di Rico, Gianluca; Arcidiacono, Carmelo; Dolci, Mauro

    2014-07-01

    The Enhanced Resolution Imager and Spectrograph (ERIS) is the next-generation adaptive optics near-IR imager and spectrograph for the Cassegrain focus of the Very Large Telescope (VLT) Unit Telescope 4, which will soon make full use of the Adaptive Optics Facility (AOF). It is a high-Strehl AO-assisted instrument that will use the Deformable Secondary Mirror (DSM) and the new Laser Guide Star Facility (4LGSF). The project has been approved for construction and has entered its preliminary design phase. ERIS will be constructed in a collaboration including the Max- Planck Institut für Extraterrestrische Physik, the Eidgenössische Technische Hochschule Zürich and the Osservatorio Astrofisico di Arcetri and will offer 1 - 5 μm imaging and 1 - 2.5 μm integral field spectroscopic capabilities with a high Strehl performance. Wavefront sensing can be carried out with an optical high-order NGS Pyramid wavefront sensor, or with a single laser in either an optical low-order NGS mode, or with a near-IR low-order mode sensor. Due to its highly sensitive visible wavefront sensor, and separate near-IR low-order mode, ERIS provides a large sky coverage with its 1' patrol field radius that can even include AO stars embedded in dust-enshrouded environments. As such it will replace, with a much improved single conjugated AO correction, the most scientifically important imaging modes offered by NACO (diffraction limited imaging in the J to M bands, Sparse Aperture Masking and Apodizing Phase Plate (APP) coronagraphy) and the integral field spectroscopy modes of SINFONI, whose instrumental module, SPIFFI, will be upgraded and re-used in ERIS. As part of the SPIFFI upgrade a new higher resolution grating and a science detector replacement are envisaged, as well as PLC driven motors. To accommodate ERIS at the Cassegrain focus, an extension of the telescope back focal length is required, with modifications of the guider arm assembly. In this paper we report on the status of the

  18. Tellurium in active volcanic environments: Preliminary results

    Science.gov (United States)

    Milazzo, Silvia; Calabrese, Sergio; D'Alessandro, Walter; Brusca, Lorenzo; Bellomo, Sergio; Parello, Francesco

    2014-05-01

    Tellurium is a toxic metalloid and, according to the Goldschmidt classification, a chalcophile element. In the last years its commercial importance has considerably increased because of its wide use in solar cells, thermoelectric and electronic devices of the last generation. Despite such large use, scientific knowledge about volcanogenic tellurium is very poor. Few previous authors report result of tellurium concentrations in volcanic plume, among with other trace metals. They recognize this element as volatile, concluding that volcanic gases and sulfur deposits are usually enriched with tellurium. Here, we present some results on tellurium concentrations in volcanic emissions (plume, fumaroles, ash leachates) and in environmental matrices (soils and plants) affected by volcanic emissions and/or deposition. Samples were collected at Etna and Vulcano (Italy), Turrialba (Costa Rica), Miyakejima, Aso, Asama (Japan), Mutnovsky (Kamchatka) at the crater rims by using common filtration techniques for aerosols (polytetrafluoroethylene filters). Filters were both eluted with Millipore water and acid microwave digested, and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). Volcanic ashes emitted during explosive events on Etna and Copahue (Argentina) were analyzed for tellurium bulk composition and after leaching experiments to evaluate the soluble fraction of tellurium. Soils and leaves of vegetation were also sampled close to active volcanic vents (Etna, Vulcano, Nisyros, Nyiragongo, Turrialba, Gorely and Masaya) and investigated for tellurium contents. Preliminary results showed very high enrichments of tellurium in volcanic emissions comparing with other volatile elements like mercury, arsenic, thallium and bismuth. This suggests a primary transport in the volatile phase, probably in gaseous form (as also suggested by recent studies) and/or as soluble salts (halides and/or sulfates) adsorbed on the surface of particulate particles and ashes. First

  19. PRELIMINARY STUDY OF EXTRACTABLE PROTEIN BINDING USING MALEIC ANHYDRIDE COPOLYMER

    Institute of Scientific and Technical Information of China (English)

    Thirawan Nipithakul; Ladawan Watthanachote; Nanticha Kalapat

    2012-01-01

    A preliminary study of using maleic anhydride copolymer for protein binding has been carried out.The polymeric films were prepared by compression of the purified resin and annealing the film to induce efficient back formation of the anhydride groups.The properties of the film surface were analyzed by attenuated total reflection Fourier transforms infrared spectroscopy and water contact angle measurements.The protein content was determined by Bradford assay.To obtain optimum conditions,immersion time for protein binding was examined.Results revealed that proteins can be successfully immobilized onto the film surface via covalent linkage.The efficiency of the covalent binding of the extractable protein to maleic anhydride-polyethylene film was estimated at 69.87 μtg/cm2,although the film had low anhydride content (3%) on the surface.

  20. Aconcagua peak geodynamics from GPS observations, Mendoza, Argentina: preliminary results

    Directory of Open Access Journals (Sweden)

    M. L. Mateo

    2009-12-01

    Full Text Available In 2005, the SIGMA Program (Mount Aconcagua GNSS Research System was implemented to investigate the geodynamics of the Aconcagua mountain region in the Central Andes. For this purpose, a continuously recording GPS station, ACON, was installed on the summit of Mount Aconcagua at 6.292 m a.s.l. The installation required special technology to support the equipment under extreme climatic conditions. The power supply system was optimized in 2008, so that a greater quantity of data could be recorded. This, in turn, will lead to more accurate estimates of displacement of the Aconcagua peak. Preliminary results from the ACON station indicate an average horizontal velocity of 0.023±0.0001 m/yr toward NE in 2 time windows between 2006 and 2008.

  1. Preliminary background prediction for the INTEGRAL x-ray monitor

    DEFF Research Database (Denmark)

    Feroci, M.; Costa, E.; Budtz-Joergensen, C.

    1996-01-01

    The JEM-X (joint European x-ray monitor) experiment will be flown onboard the ESA's INTEGRAL satellite. The instrumental background level of the two JEM-X twin detectors will depend on several parameters, among which the satellite orbit and mass distribution, and the detectors materials play...... rays with the spacecraft structures. This calculation has been carried out by means of a Monte Carlo simulation using the code MCNP. The background due to on- orbit material activation and to the primary cosmic rays direct interactions with the detecting medium has not been considered. The INTEGRAL...... satellite structure is only now being completely defined and the details of the instrument design are still under evolution. The present background estimation can therefore be only preliminary and based on some reasonable approximations on the radiation environment in which the INTEGRAL experiments...

  2. Neoplastic potential of gastric irradiation. IV. Risk estimates

    Energy Technology Data Exchange (ETDEWEB)

    Griem, M.L.; Justman, J.; Weiss, L.

    1984-12-01

    No significant tumor increase was found in the initial analysis of patients irradiated for peptic ulcer and followed through 1962. A preliminary study was undertaken 22 years later to estimate the risk of cancer due to gastric irradiation for peptic ulcer disease. A population of 2,049 irradiated patients and 763 medically managed patients has been identified. A relative risk of 3.7 was found for stomach cancer and an initial risk estimate of 5.5 x 10(-6) excess stomach cancers per person rad was calculated. A more complete follow-up is in progress to further elucidate this observation and decrease the ascertainment bias; however, preliminary data are in agreement with the Japanese atomic bomb reports.

  3. A neural flow estimator

    DEFF Research Database (Denmark)

    Jørgensen, Ivan Harald Holger; Bogason, Gudmundur; Bruun, Erik

    1995-01-01

    This paper proposes a new way to estimate the flow in a micromechanical flow channel. A neural network is used to estimate the delay of random temperature fluctuations induced in a fluid. The design and implementation of a hardware efficient neural flow estimator is described. The system...... is implemented using switched-current technique and is capable of estimating flow in the μl/s range. The neural estimator is built around a multiplierless neural network, containing 96 synaptic weights which are updated using the LMS1-algorithm. An experimental chip has been designed that operates at 5 V...

  4. Optomechanical parameter estimation

    CERN Document Server

    Ang, Shan Zheng; Bowen, Warwick P; Tsang, Mankei

    2013-01-01

    We propose a statistical framework for the problem of parameter estimation from a noisy optomechanical system. The Cram\\'er-Rao lower bound on the estimation errors in the long-time limit is derived and compared with the errors of radiometer and expectation-maximization (EM) algorithms in the estimation of the force noise power. When applied to experimental data, the EM estimator is found to have the lowest error and follow the Cram\\'er-Rao bound most closely. With its ability to estimate most of the system parameters, the EM algorithm is envisioned to be useful for optomechanical sensing, atomic magnetometry, and classical or quantum system identification applications in general.

  5. Hardware Accelerated Power Estimation

    CERN Document Server

    Coburn, Joel; Raghunathan, Anand

    2011-01-01

    In this paper, we present power emulation, a novel design paradigm that utilizes hardware acceleration for the purpose of fast power estimation. Power emulation is based on the observation that the functions necessary for power estimation (power model evaluation, aggregation, etc.) can be implemented as hardware circuits. Therefore, we can enhance any given design with "power estimation hardware", map it to a prototyping platform, and exercise it with any given test stimuli to obtain power consumption estimates. Our empirical studies with industrial designs reveal that power emulation can achieve significant speedups (10X to 500X) over state-of-the-art commercial register-transfer level (RTL) power estimation tools.

  6. 对"降低中国化石燃料燃烧和水泥生产过程碳排放估算"一文主要结论的初步分析%Preliminary Comment on "Reduced carbon emission estimates from fossil fuel combustion and cement production in China"

    Institute of Scientific and Technical Information of China (English)

    于胜民; 马翠梅; 王田; 李湘

    2015-01-01

    2015年8月20日,由中国科学院上海高等研究院联合哈佛大学、英国东英吉利大学等24所国内外科研机构组成的团队在《自然》杂志第524卷第7565期研究快讯上发表了题为"Reduced Carbon Emission Estimates from Fossil Fuel Combustion and Cement Production in China(降低中国化石燃料燃烧和水泥生产过程碳排放估算)"的文章(以下简称《自然》一文),提出了中国煤炭实测排放因子比IPCC缺省值低40%、中国2005年国家温室气体清单中碳排放数据高估了12%等结论,引起了国内外高度关注.本文分析了《自然》一文在排放源覆盖范围的完整性、方法学的科学性、数据的准确性、样本选取的代表性等方面存在的问题,指出其估算结果与国家清单数据不具有可比性,《自然》一文中的其他结论也值得商榷.

  7. Assessing internet addiction using the parsimonious internet addiction components model—A preliminary study.

    OpenAIRE

    Kuss, D.J.; Shorter, G. W.; Rooij, A.J. van; Griffiths, M.D.; Schoenmakers, T.M.

    2014-01-01

    Internet usage has grown exponentially over the last decade. Research indicates that excessive Internet use can lead to symptoms associated with addiction. To date, assessment of potential Internet addiction has varied regarding populations studied and instruments used, making reliable prevalence estimations difficult. To overcome the present problems a preliminary study was conducted testing a parsimonious Internet addiction components model based on Griffiths’ addiction components (Journal ...

  8. Assessing Internet addiction using the parsimonious Internet addiction components model - a preliminary study [forthcoming

    OpenAIRE

    Kuss, DJ; Shorter, GW; Van Rooij, AJ; Griffiths, MD; Schoenmakers, T.

    2014-01-01

    Internet usage has grown exponentially over the last decade. Research indicates that excessive Internet use can lead to symptoms associated with addiction. To date, assessment of potential Internet addiction has varied regarding populations studied and instruments used, making reliable prevalence estimations difficult. To overcome the present problems a preliminary study was conducted testing a parsimonious Internet addiction components model based on Griffiths’ addiction components (2005), i...

  9. Waste Feed Delivery System Phase 1 Preliminary Reliability and Availability and Maintainability Analysis [SEC 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    CARLSON, A.B.

    1999-11-11

    The document presents updated results of the preliminary reliability, availability, maintainability analysis performed for delivery of waste feed from tanks 241-AZ-101 and 241-AN-105 to British Nuclear Fuels Limited, inc. under the Tank Waste Remediation System Privatization Contract. The operational schedule delay risk is estimated and contributing factors are discussed.

  10. A Robbins-Monro procedure for estimation in semiparametric regression models

    CERN Document Server

    Bercu, Bernard

    2011-01-01

    This paper is devoted to the parametric estimation of a shift together with the nonparametric estimation of a regression function in a semiparametric regression model. We implement a Robbins-Monro procedure very efficient and easy to handle. On the one hand, we propose a stochastic algorithm similar to that of Robbins-Monro in order to estimate the shift parameter. A preliminary evaluation of the regression function is not necessary for estimating the shift parameter. On the other hand, we make use of a recursive Nadaraya-Watson estimator for the estimation of the regression function. This kernel estimator takes in account the previous estimation of the shift parameter. We establish the almost sure convergence for both Robbins-Monro and Nadaraya-Watson estimators. The asymptotic normality of our estimates is also provided.

  11. Estimating Cosmological Parameter Covariance

    CERN Document Server

    Taylor, Andy

    2014-01-01

    We investigate the bias and error in estimates of the cosmological parameter covariance matrix, due to sampling or modelling the data covariance matrix, for likelihood width and peak scatter estimators. We show that these estimators do not coincide unless the data covariance is exactly known. For sampled data covariances, with Gaussian distributed data and parameters, the parameter covariance matrix estimated from the width of the likelihood has a Wishart distribution, from which we derive the mean and covariance. This mean is biased and we propose an unbiased estimator of the parameter covariance matrix. Comparing our analytic results to a numerical Wishart sampler of the data covariance matrix we find excellent agreement. An accurate ansatz for the mean parameter covariance for the peak scatter estimator is found, and we fit its covariance to our numerical analysis. The mean is again biased and we propose an unbiased estimator for the peak parameter covariance. For sampled data covariances the width estimat...

  12. A practical method for suction estimation in unsaturated soil testing

    OpenAIRE

    Amaral, M.F.; Viana da Fonseca, A.; Romero Morales, Enrique Edgar; Arroyo Alvarez de Toledo, Marcos

    2013-01-01

    This research presents an alternative methodology to estimate suction in triaxial tests carried out under constant water content. A preliminary determination of the retention curve is proposed using two complementary techniques, namely psychrometer measurements and mercury intrusion porosimetry results. Starting with the definition of a set of retention curves at different void ratios, an attempt is made for establishing a correspondence of the measured retention curves with the results of a ...

  13. The cost of child health inequalities in Aotearoa New Zealand: a preliminary scoping study

    Directory of Open Access Journals (Sweden)

    Mills Clair

    2012-05-01

    Full Text Available Abstract Background Health inequalities have been extensively documented, internationally and in New Zealand. The cost of reducing health inequities is often perceived as high; however, recent international studies suggest the cost of “doing nothing” is itself significant. This study aimed to develop a preliminary estimate of the economic cost of health inequities between Māori (indigenous and non-Māori children in New Zealand. Methods Standard quantitative epidemiological methods and “cost of illness” methodology were employed, within a Kaupapa Māori theoretical framework. Data were obtained from national data collections held by the New Zealand Health Information Service and other health sector agencies. Results Preliminary estimates suggest child health inequities between Māori and non-Māori in New Zealand are cost-saving to the health sector. However the societal costs are significant. A conservative “base case” scenario estimate is over $NZ62 million per year, while alternative costing methods yield larger costs of nearly $NZ200 million per annum. The total cost estimate is highly sensitive to the costing method used and Value of Statistical Life applied, as the cost of potentially avoidable deaths of Māori children is the major contributor to this estimate. Conclusions This preliminary study suggests that health sector spending is skewed towards non-Māori children despite evidence of greater Māori need. Persistent child health inequities result in significant societal economic costs. Eliminating child health inequities, particularly in primary care access, could result in significant economic benefits for New Zealand. However, there are conceptual, ethical and methodological challenges in estimating the economic cost of child health inequities. Re-thinking of traditional economic frameworks and development of more appropriate methodologies is required.

  14. Hydrothermal Liquefaction Treatment Preliminary Hazard Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Lowry, Peter P.; Wagner, Katie A.

    2015-08-31

    A preliminary hazard assessment was completed during February 2015 to evaluate the conceptual design of the modular hydrothermal liquefaction treatment system. The hazard assessment was performed in 2 stages. An initial assessment utilizing Hazard Identification and Preliminary Hazards Analysis (PHA) techniques identified areas with significant or unique hazards (process safety-related hazards) that fall outside of the normal operating envelope of PNNL and warranted additional analysis. The subsequent assessment was based on a qualitative What-If analysis. This analysis was augmented, as necessary, by additional quantitative analysis for scenarios involving a release of hazardous material or energy with the potential for affecting the public.

  15. Fiscal year 1981 US corn and soybeans pilot preliminary experiment plan, phase 1

    Science.gov (United States)

    Livingston, G. P.; Nedelman, K. S.; Norwood, D. F.; Smith, J. H. (Principal Investigator)

    1981-01-01

    A draft of the preliminary experiment plan for the foreign commodity production forecasting project fiscal year 1981 is presented. This draft plan includes: definition of the phase 1 and 2 U.S. pilot objectives; the proposed experiment design to evaluate crop calendar, area estimation, and area aggregation components for corn and soybean technologies using 1978/1979 crop-year data; a description of individual sensitivity evaluations of the baseline corn and soybean segment classification procedure; and technology and data assessment in support of the corn and soybean estimation technology for use in the U.S. central corn belt.

  16. Causal Effect Estimation Methods

    OpenAIRE

    2014-01-01

    Relationship between two popular modeling frameworks of causal inference from observational data, namely, causal graphical model and potential outcome causal model is discussed. How some popular causal effect estimators found in applications of the potential outcome causal model, such as inverse probability of treatment weighted estimator and doubly robust estimator can be obtained by using the causal graphical model is shown. We confine to the simple case of binary outcome and treatment vari...

  17. Continuous Time Model Estimation

    OpenAIRE

    Carl Chiarella; Shenhuai Gao

    2004-01-01

    This paper introduces an easy to follow method for continuous time model estimation. It serves as an introduction on how to convert a state space model from continuous time to discrete time, how to decompose a hybrid stochastic model into a trend model plus a noise model, how to estimate the trend model by simulation, and how to calculate standard errors from estimation of the noise model. It also discusses the numerical difficulties involved in discrete time models that bring about the unit ...

  18. Electrical estimating methods

    CERN Document Server

    Del Pico, Wayne J

    2014-01-01

    Simplify the estimating process with the latest data, materials, and practices Electrical Estimating Methods, Fourth Edition is a comprehensive guide to estimating electrical costs, with data provided by leading construction database RS Means. The book covers the materials and processes encountered by the modern contractor, and provides all the information professionals need to make the most precise estimate. The fourth edition has been updated to reflect the changing materials, techniques, and practices in the field, and provides the most recent Means cost data available. The complexity of el

  19. Fractional cointegration rank estimation

    DEFF Research Database (Denmark)

    Lasak, Katarzyna; Velasco, Carlos

    We consider cointegration rank estimation for a p-dimensional Fractional Vector Error Correction Model. We propose a new two-step procedure which allows testing for further long-run equilibrium relations with possibly different persistence levels. The fi…rst step consists in estimating......-likelihood ratio test of no-cointegration on the estimated p - r common trends that are not cointegrated under the null. The cointegration degree is re-estimated in the second step to allow for new cointegration relationships with different memory. We augment the error correction model in the second step...

  20. Generalized Agile Estimation Method

    Directory of Open Access Journals (Sweden)

    Shilpa Bahlerao

    2011-01-01

    Full Text Available Agile cost estimation process always possesses research prospects due to lack of algorithmic approaches for estimating cost, size and duration. Existing algorithmic approach i.e. Constructive Agile Estimation Algorithm (CAEA is an iterative estimation method that incorporates various vital factors affecting the estimates of the project. This method has lots of advantages but at the same time has some limitations also. These limitations may due to some factors such as number of vital factors and uncertainty involved in agile projects etc. However, a generalized agile estimation may generate realistic estimates and eliminates the need of experts. In this paper, we have proposed iterative Generalized Estimation Method (GEM and presented algorithm based on it for agile with case studies. GEM  based algorithm various project domain classes and vital factors with prioritization level. Further, it incorporates uncertainty factor to quantify the risk of project for estimating cost, size and duration. It also provides flexibility to project managers for deciding on number of vital factors, uncertainty level and project domains thereby maintaining the agility.

  1. Short-Term Energy Outlook: Quarterly projections. Fourth quarter 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-05

    The Energy Information Administration (EIA) prepares quarterly, short-term energy supply, demand, and price projections for publication in February, May, August, and November in the Short-Term Energy Outlook (Outlook). An annual supplement analyzes the performance of previous forecasts, compares recent cases with those of other forecasting services, and discusses current topics related to the short-term energy markets. (See Short-Term Energy Outlook Annual Supplement, DOE/EIA-0202.) The forecast period for this issue of the Outlook extends from the fourth quarter of 1993 through the fourth quarter of 1994. Values for the third quarter of 1993, however, are preliminary EIA estimates (for example, some monthly values for petroleum supply and disposition are derived in part from weekly data reported in the Weekly Petroleum Status Report) or are calculated from model simulations using the latest exogenous information available (for example, electricity sales and generation are simulated using actual weather data). The historical energy data are EIA data published in the Monthly Energy Review, Petroleum Supply Monthly, and other EIA publications.

  2. Capital requirements for the transportation of energy materials: 1979 ARC estimates. Draft final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-13

    This report contains TERA's estimates of capital requirements to transport natural gas, crude oil, petroleum products, and coal in the United States by 1990. The low, medium, and high world-oil-price scenarios from the EIA's Mid-range Energy Forecasting System (MEFS), as used in the 1979 Annual Report to Congress (ARC), were provided as a basis for the analysis and represent three alternative futures. TERA's approach varies by energy commodity to make best use of the information and analytical tools available. Summaries of transportation investment requirements through 1990 are given. Total investment requirements for three modes (pipelines, rails, waterways and the three energy commodities can accumulate to a $49.9 to $50.9 billion range depending on the scenario. The scenarios are distinguished primarily by the world price of oil which, given deregulation of domestic oil prices, affects US oil prices even more profoundly than in the past. The high price of oil, following the evidence of the last year, is projected to hold demand for oil below the recent past.

  3. Preliminary designs: passive solar manufactured housing. Technical status report

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-12

    The criteria established to guide the development of the preliminary designs are listed. Three preliminary designs incorporating direct gain and/or sunspace are presented. Costs, drawings, and supporting calculations are included. (MHR)

  4. Preliminary design package for Sunair SEC-601 solar collector

    Science.gov (United States)

    1978-01-01

    The preliminary design of the Owens-Illinois model Sunair SEC-601 tubular air solar collector is presented. Information in this package includes the subsystem design and development approaches, hazard analysis, and detailed drawings available as the preliminary design review.

  5. Estimating the magnitude of food waste generated in South Africa.

    Science.gov (United States)

    Oelofse, Suzan Hh; Nahman, Anton

    2013-01-01

    Throughout the developed world, food is treated as a disposable commodity. Between a third and half of all food produced for human consumption globally is estimated to be wasted. However, attempts to quantify the actual magnitude of food wasted globally are constrained by limited data, particularly from developing countries. This article attempts to quantify total food waste generation (including both pre-consumer food losses, as well as post-consumer food waste) in South Africa. The estimates are based on available food supply data for South Africa and on estimates of average food waste generation at each step of the food supply chain for sub-Saharan Africa. The preliminary estimate of the magnitude of food waste generation in South Africa is in the order of 9.04 million tonnes per annum. On a per capita basis, overall food waste in South Africa in 2007 is estimated at 177 kg/capita/annum and consumption waste at 7 kg/capita/annum. However, these preliminary figures should be used with caution and are subject to verification through ongoing research.

  6. 19 CFR 4.8 - Preliminary entry.

    Science.gov (United States)

    2010-04-01

    ... electronic equivalent of a complete Customs Form 1302 (Cargo Declaration), in the manner provided in § 4.7(b... 19 Customs Duties 1 2010-04-01 2010-04-01 false Preliminary entry. 4.8 Section 4.8 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE...

  7. 40 CFR 1042.210 - Preliminary approval.

    Science.gov (United States)

    2010-07-01

    ... specific provisions that apply for deterioration factors. Decisions made under this section are considered... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Preliminary approval. 1042.210 Section 1042.210 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION...

  8. Preliminary aerothermodynamic design method for hypersonic vehicles

    Science.gov (United States)

    Harloff, G. J.; Petrie, S. L.

    1987-01-01

    Preliminary design methods are presented for vehicle aerothermodynamics. Predictions are made for Shuttle orbiter, a Mach 6 transport vehicle and a high-speed missile configuration. Rapid and accurate methods are discussed for obtaining aerodynamic coefficients and heat transfer rates for laminar and turbulent flows for vehicles at high angles of attack and hypersonic Mach numbers.

  9. 25 CFR 11.1005 - Preliminary inquiry.

    Science.gov (United States)

    2010-04-01

    ... ORDER CODE Juvenile Offender Procedure § 11.1005 Preliminary inquiry. (a) If a minor is placed in... purpose of determining: (1) Whether probable cause exist to believe the minor committed the alleged.... (b) If a minor has been released to the parents, guardian or custodian, the children's court shall...

  10. Preliminary aspects of a qualitative research projection

    Directory of Open Access Journals (Sweden)

    Simona Haidau

    2012-12-01

    Full Text Available In this paper are presented preliminary aspects on the design of of qualitative research achieved by nongovernmental organizations in the North-East of Romȃnia. The research aims to identify attitudes, opinions and behaviors to nongovernmental organizations to implement public relations programs and campaigns.

  11. 15 CFR 270.101 - Preliminary reconnaissance.

    Science.gov (United States)

    2010-01-01

    ... establishment of a Team, the leader of the initial assessment will report his/her findings to the Director in a... the extent the Director deems it appropriate, the Director may conduct a preliminary reconnaissance at the site of a building failure. The Director may establish and deploy a Team to conduct the...

  12. Preliminary investigations of piezoelectric based LED luminary

    DEFF Research Database (Denmark)

    Nielsen, Dennis; Andersen, Michael A. E.; Meyer, Kaspar Sinding

    2011-01-01

    This paper presents a preliminary study of PT (Piezoelectric Transformer) based SMPS’s (Switch Mode Power Supplies) for LED luminary. The unique properties of PTs (efficiency, power density and EMI) make them highly suitable for this application. Power stage topologies, rectifiers circuits, modul...

  13. Preliminary Results on Charmed Meson Spectroscopy

    CERN Document Server

    Sarwar, S; Paolone, V S; Reyes, M; Anjos, J C; Yager, P M; Bediaga, I; Göbel, C; Magnin, J; De Miranda, J M; Pepe, I M; Dos Reis, A C; Simão, F R A; Carrillo, S; Casimiro, E; Méndez, H; Sánchez-Hernández, A; Uribe, C; Vásquez, F; Cinquini, L; Cumalat, J P; Ramírez, J E; O'Reilly, B; Vaandering, E W; Butler, J N; Cheung, H W K; Gaines, I; Garbincius, P H; Garren, L A; Gottschalk, E E; Gourlay, S A; Kasper, P H; Kreymer, A E; Kutschke, R; Bianco, S; Fabbri, Franco Luigi; Sarwar, S; Cawlfield, C; Kim, D Y; Park, K S; Rahimi, A; Gardner, R; Chung, Y S; Kang, J S; Ko, B R; Kwak, J W; Lee, K B; Myung, S S; Alimonti, G; Boschini, M; Brambilla, D; Caccianiga, B; Calandrino, A; D'Angelo, P; Di Corato, M; Dini, P; Giammarchi, M G; Inzani, P; Leveraro, F; Malvezzi, S; Menasce, D; Mezzadri, M; Milazzo, L; Moroni, L; Pedrini, D; Prelz, F; Rovere, M; Sala, A; Sala, S; Arena, V; Boca, G; Bonomi, G; Gianini, G; Liguori, G; Merlo, M; Pantea, D; Ratti, S P; Riccardi, C; Torre, P; Viola, L; Vitulo, P; Hernández, Pilar; López, A M; Méndez, L; Mirles, M A; Montiel, E; Olaya, D; Quinones, J; Rivera, C; Zhang-Mayaguez, Y; Copty, N K; Purohit, M; Cho, K; Handler, T; Engh, D; Johns, W E; Hosack, M; Nehring, M S; Sales, M; Sheldon, P D; Stenson, K; Webster, M S; Sheaff, M; Kwon, Y; Sarwar, Shahzad

    2001-01-01

    We report the preliminary measurement by the FOCUS Collaboration (E831 at Fermilab) of masses and widths of the L=1 charm mesons $D_2^{*0}$ and $D_2^{*+}$. The fit of the invariant mass distribution requires an additional term to account for a broad structure over background.

  14. Preliminary Study on Airlift Membran—Bioreactor

    Institute of Scientific and Technical Information of China (English)

    XUNong; XINGWeihong; 等

    2002-01-01

    A new type of membrane bioreactor named “airlift membrane-bioreactor”is discussed.For municipal wastewater reclamation,the preliminary study on airlift membrane-bioreactor shows its good performance such as high flux and lower energy consumption.The airlift membrane-bioreactor is potentially applicable in bioengineering and environmental protection fields.

  15. A DESCRIPTIVE INDONESIAN GRAMMAR--PRELIMINARY EDITION.

    Science.gov (United States)

    DYEN, ISIDORE

    THIS PRELIMINARY EDITION COMPRISES A DESCRIPTIVE GRAMMAR OF INDONESIAN (BAHASA INDONESIA), THE OFFICIAL LANGUAGE OF THE REPUBLIC OF INDONESIA. THE THREE SECTIONS--PHONOLOGY, SYNTAX, AND MORPHOLOGY--PRESENT A COMPREHENSIVE LINGUISTIC ANALYSIS OF INDONESIAN, WITH OCCASIONAL CONTRASTIVE REFERENCE TO MALAY, JAVANESE, SUNDANESE, AND SUMATRAN. THIS…

  16. The Adaptation Gap Report - a Preliminary Assessment

    DEFF Research Database (Denmark)

    Alverson, Keith; Olhoff, Anne; Noble, Ian;

    This first Adaptation Gap report provides an equally sobering assessment of the gap between adaptation needs and reality, based on preliminary thinking on how baselines, future goals or targets, and gaps between them might be defined for climate change adaptation. The report focuses on gaps in de...... in developing countries in three important areas: finance, technology and knowledge....

  17. Significance of CLIA combined with EIA method in detecting anti-HCV and HCV-cAg for HCV primary screening%CLIA法测抗-HCV联合EIA法检测HCV-cAg在HCV感染初筛试验中的意义

    Institute of Scientific and Technical Information of China (English)

    周珍娟; 刘程

    2016-01-01

    目的 探讨自动化学发光免疫分析法(CLIA)测抗-丙型肝炎病毒(抗-HCV)联合酶联免疫法(EIA)测HCV核心抗原(HCV-cAg)在HCV感染初筛试验中的应用价值.方法 采用CLIA法、EIA法检测所有临床标本中抗-HCV和HCV-cAg,比较抗-HCV初筛阳性样本与丙型病毒性肝炎病毒核糖核酸(HCV-RNA)检测结果.结果 本组698例标本中,24例呈阳性,其中23例抗-HCV阳性,9例HCV-cAg阳性,抗-HCV和HCV-cAg检测结果同时阳性者8例.有1例抗-HCV检测阴性,而HCV-cAg检测为阳性,后经HCV-RNA检测证实为HCV感染.24例阳性标本经HCV-RNA检测后,共检出阳性标本17例,其中经HCV-cAg检测为阳性的9例患者均经HCV-RNA检测证实;抗-HCV检测的23例阳性标本中16例经HCV-RNA检测证实为阳性.结论 抗-HCV联合HCV-cAg检测进行HCV感染初筛试验,可降低假阳性率,提高阳性检出率,与HCV-RNA的检测结果符合率高,有利于早期诊断.

  18. Maximum likely scale estimation

    DEFF Research Database (Denmark)

    Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo

    2005-01-01

    A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and/or ...

  19. Estimator for Random Fields

    Directory of Open Access Journals (Sweden)

    Sidi Ali Ould Abdi

    2011-01-01

    Full Text Available Given a stationary multidimensional spatial process (i=(i,i∈ℝ×ℝ,i∈ℤ, we investigate a kernel estimate of the spatial conditional quantile function of the response variable i given the explicative variable i. Asymptotic normality of the kernel estimate is obtained when the sample considered is an -mixing sequence.

  20. Estimating Health Services Requirements

    Science.gov (United States)

    Alexander, H. M.

    1985-01-01

    In computer program NOROCA populations statistics from National Center for Health Statistics used with computational procedure to estimate health service utilization rates, physician demands (by specialty) and hospital bed demands (by type of service). Computational procedure applicable to health service area of any size and even used to estimate statewide demands for health services.

  1. Estimation of Jump Tails

    DEFF Research Database (Denmark)

    Bollerslev, Tim; Todorov, Victor

    We propose a new and flexible non-parametric framework for estimating the jump tails of Itô semimartingale processes. The approach is based on a relatively simple-to-implement set of estimating equations associated with the compensator for the jump measure, or its "intensity", that only utilizes ...

  2. Software cost estimation

    NARCIS (Netherlands)

    Heemstra, F.J.

    1992-01-01

    The paper gives an overview of the state of the art of software cost estimation (SCE). The main questions to be answered in the paper are: (1) What are the reasons for overruns of budgets and planned durations? (2) What are the prerequisites for estimating? (3) How can software development effort be

  3. Large Deviations of Estimators

    NARCIS (Netherlands)

    Kester, A.D.M.; Kallenberg, W.C.M.

    1986-01-01

    The performance of a sequence of estimators $\\{T_n\\}$ of $g(\\theta)$ can be measured by its inaccuracy rate $-\\lim \\inf_{n\\rightarrow\\infty} n^{-1} \\log \\mathbb{P}_\\theta(\\|T_n - g(\\theta)\\| > \\varepsilon)$. For fixed $\\varepsilon > 0$ optimality of consistent estimators $\\operatorname{wrt}$ the ina

  4. Impacts of Hydraulic Residence Time Prediction and Diurnal Loading Pattern on the Estimation of Drug Abuse in Urban Areas

    DEFF Research Database (Denmark)

    Ramin, Pedram; Polesel, Fabio; Andresson, Guðmundur

    The measurement of illicit drugs and their human urinary metabolites in influents of municipal wastewater treatment plants (WWTPs) has been recently used to estimate prohibited drug consumption in catchment communities. In this study, a preliminary estimation of the consumption of cocaine (COC...

  5. Application of CERREX software for KRR-1 Decommissioning Cost Estimation

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Yunjeong; Park, Seungkook [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Main objectives of cost estimation is to indicate the costs required to complete the decommissioning project and to optimize the dismantling sequence and timing and then minimize the decommissioning total costs. There are three types of cost estimate; (i) Order of magnitude estimate, (ii) Budgetary estimate, (iii) Definitive estimate. Second of the theses types is applied to cost calculation in this paper. This was also applied to cost estimate part of preliminary decommissioning plan for Kijang construction approval. In this paper, the methodology and procedure for decommissioning costing using CERREX software were presented and cost estimation was performed and compared with actual decommissioning cost for KRR- 1(Korea Reactor Research, Unit 1). Cost estimation for KRR-1 was carried out applying to CERREX software. Table 1 shows the result values of the calculation. The currency was calculated as USD. Calculated cost is within the limit of 'Budgetary estimate' and the values is approximately $7,800,000. Labor costs are calculated based on manpower components per involved professions and hour rates per typical professions.

  6. Estimating Resilience Across Landscapes

    Directory of Open Access Journals (Sweden)

    Garry D. Peterson

    2002-06-01

    Full Text Available Although ecological managers typically focus on managing local or regional landscapes, they often have little ability to control or predict many of the large-scale, long-term processes that drive changes within these landscapes. This lack of control has led some ecologists to argue that ecological management should aim to produce ecosystems that are resilient to change and surprise. Unfortunately, ecological resilience is difficult to measure or estimate in the landscapes people manage. In this paper, I extend system dynamics approaches to resilience and estimate resilience using complex landscape simulation models. I use this approach to evaluate cross-scale edge, a novel empirical method for estimating resilience based on landscape pattern. Cross-scale edge provides relatively robust estimates of resilience, suggesting that, with some further development, it could be used as a management tool to provide rough and rapid estimates of areas of resilience and vulnerability within a landscape.

  7. Sensitivity to Estimation Errors in Mean-variance Models

    Institute of Scientific and Technical Information of China (English)

    Zhi-ping Chen; Cai-e Zhao

    2003-01-01

    In order to give a complete and accurate description about the sensitivity of efficient portfolios to changes in assets' expected returns, variances and covariances, the joint effect of estimation errors in means, variances and covariances on the efficient portfolio's weights is investigated in this paper. It is proved that the efficient portfolio's composition is a Lipschitz continuous, differentiable mapping of these parameters under suitable conditions. The change rate of the efficient portfolio's weights with respect to variations about riskreturn estimations is derived by estimating the Lipschitz constant. Our general quantitative results show thatthe efficient portfolio's weights are normally not so sensitive to estimation errors about means and variances .Moreover, we point out those extreme cases which might cause stability problems and how to avoid them in practice. Preliminary numerical results are also provided as an illustration to our theoretical results.

  8. A Computationally Efficient Method for Polyphonic Pitch Estimation

    Science.gov (United States)

    Zhou, Ruohua; Reiss, Joshua D.; Mattavelli, Marco; Zoia, Giorgio

    2009-12-01

    This paper presents a computationally efficient method for polyphonic pitch estimation. The method employs the Fast Resonator Time-Frequency Image (RTFI) as the basic time-frequency analysis tool. The approach is composed of two main stages. First, a preliminary pitch estimation is obtained by means of a simple peak-picking procedure in the pitch energy spectrum. Such spectrum is calculated from the original RTFI energy spectrum according to harmonic grouping principles. Then the incorrect estimations are removed according to spectral irregularity and knowledge of the harmonic structures of the music notes played on commonly used music instruments. The new approach is compared with a variety of other frame-based polyphonic pitch estimation methods, and results demonstrate the high performance and computational efficiency of the approach.

  9. 32 CFR 644.30 - Preliminary real estate work.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Preliminary real estate work. 644.30 Section 644... PROPERTY REAL ESTATE HANDBOOK Project Planning Military (army and Air Force) and Other Federal Agencies § 644.30 Preliminary real estate work. (a) Preliminary real estate work is defined as that action taken...

  10. 29 CFR 1601.23 - Preliminary or temporary relief.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Preliminary or temporary relief. 1601.23 Section 1601.23... Employment Practices § 1601.23 Preliminary or temporary relief. (a) In the interest of the expeditious... subdivision, any recommendation for preliminary or temporary relief shall be transmitted directly to the...

  11. A novel nonpharmacological intervention - breathing-controlled electrical stimulation for neuropathic pain management after spinal cord injury - a preliminary study.

    Science.gov (United States)

    Li, Shengai; Davis, Matthew; Frontera, Joel E; Li, Sheng

    2016-01-01

    The objective of this study was to examine the effectiveness of a novel nonpharmacological intervention - breathing-controlled electrical stimulation (BreEStim) - for neuropathic pain management in spinal cord injury (SCI) patients. There were two experiments: 1) to compare the effectiveness between BreEStim and conventional electrical stimulation (EStim) in Experiment (Exp) 1 and 2) to examine the dose-response effect of BreEStim in Exp 2. In Exp 1, 13 SCI subjects (6 males and 7 females, history of SCI: 58.2 months, from 7 to 150 months, impairments ranging from C4 AIS B to L1 AIS B) received both BreEStim and EStim in a randomized order with at least 3 days apart. A total of 120 electrical stimuli to the median nerve transcutaneously were triggered by voluntary inhalation during BreEStim or were randomly delivered during EStim. In Exp 2, a subset of 7 subjects received BreEStim120 and 240 stimuli randomly on two different days with 7 days apart (BreEStim120 vs BreEStim240). The primary outcome variable was the visual analog scale (VAS) score. In Exp 1, both BreEStim and EStim showed significant analgesic effects. Reduction in VAS score was significantly greater after BreEStim (2.6±0.3) than after EStim (0.8±0.3) (P<0.001). The duration of analgesic effect was significantly longer after BreEStim (14.2±6 hours) than after EStim (1.9±1 hours) (P=0.04). In Exp 2, BreEStim120 and BreEStim240 had similar degree and duration of analgesic effects. The findings from this preliminary study suggest that BreEStim is an effective alternative nonpharmacological treatment for chronic neuropathic pain in patients suffering from SCI.

  12. Preliminary Analysis of Species Partitioning in the DWPF Melter

    Energy Technology Data Exchange (ETDEWEB)

    Choi, A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Kesterson, M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Johnson, F. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-15

    The work described in this report is preliminary in nature since its goal was to demonstrate the feasibility of estimating the off-gas entrainment rates from the Defense Waste Processing Facility (DWPF) melter based on a simple mass balance using measured feed and glass pour stream compositions and timeaveraged melter operating data over the duration of one canister-filling cycle. The only case considered in this study involved the SB6 pour stream sample taken while Canister #3472 was being filled over a 20-hour period on 12/20/2010, approximately three months after the bubblers were installed. The analytical results for that pour stream sample provided the necessary glass composition data for the mass balance calculations. To estimate the “matching” feed composition, which is not necessarily the same as that of the Melter Feed Tank (MFT) batch being fed at the time of pour stream sampling, a mixing model was developed involving three preceding MFT batches as well as the one being fed at that time based on the assumption of perfect mixing in the glass pool but with an induction period to account for the process delays involved in the calcination/fusion step in the cold cap and the melter turnover.

  13. Methods for age estimation

    Directory of Open Access Journals (Sweden)

    D. Sümeyra Demirkıran

    2014-03-01

    Full Text Available Concept of age estimation plays an important role on both civil law and regulation of criminal behaviors. In forensic medicine, age estimation is practiced for individual requests as well for request of the court. In this study it is aimed to compile the methods of age estimation and to make recommendations for the solution of the problems encountered. In radiological method the epiphyseal lines of the bones and views of the teeth are used. In order to estimate the age by comparing bone radiographs; Greulich-Pyle Atlas (GPA, Tanner-Whitehouse Atlas (TWA and “Adli Tıpta Yaş Tayini (ATYT” books are used. Bone age is found to be 2 years older averagely than chronologic age, especially in puberty, according to the forensic age estimations described in the ATYT book. For the age estimation with teeth, Demirjian method is used. In time different methods are developed by modifying Demirjian method. However no accurate method was found. Histopathological studies are done on bone marrow cellularity and dermis cells. No correlation was found between histopathoogical findings and choronologic age. Important ethical and legal issues are brought with current age estimation methods especially in teenage period. Therefore it is required to prepare atlases of bone age compatible with our society by collecting the findings of the studies in Turkey. Another recommendation could be to pay attention to the courts of age raising trials of teenage women and give special emphasis on birth and population records

  14. Estimation of peak discharges of historical floods

    Directory of Open Access Journals (Sweden)

    J. Herget

    2014-05-01

    Full Text Available There is no doubt, that the hazard assessment of future floods especially under consideration of the recent environmental change can be significantly improved by the consideration of historic flood events. While flood frequency inventories on local, regional and even European scale are already developed and published, the estimation of their magnitudes indicated by discharges is still challenging. Such data are required due to significant human impact on river channels and floodplains though historic flood levels cannot be related to recent ones or recent discharges. Based on own experiences from single local key studies the general outline of an approach to estimate the discharge of the previous flood based on handed down flood level and topographic data is presented. The model for one-dimensional steady flow is based on the empirical Manning equation for the mean flow velocity. Background and potential sources of information, acceptable simplifications and data transformation for each element of the model-equation are explained and discussed. Preliminary experiences on the accuracy of ±10% are documented and potential approaches for the validation of individual estimations given. A brief discussion on benefits and limitations including a generalized statement on alternative approaches closes the review presentation of the approach.

  15. A Method for EIA Scoping of Wave Energy Converters

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Hansen, Anne Merrild; Frigaard, Peter

    2012-01-01

    During the first decade of the 21st Century the World faces spread concern for global warming caused by rise of green house gasses produced mainly by combustion of fossil fuels. Under this latest spin all renewable energies run parallel in order to achieve sustainable development. Among them wave...... energy has an unequivocal potential and technology is ready to enter the market and contribute to the renewable energy sector. Yet, frameworks and regulations for wave energy development are not fully ready, experiencing a setback caused by lack of understanding of the interaction of the technologies....... This paper presents the development of a classification of wave energy converters that is based on the different impact the technologies are expected to have on the environment. This innovative classification can be used in order to simplify the scoping process for developers and authorities....

  16. Validation of EIA sampling methods - bacterial and biochemical analysis

    Digital Repository Service at National Institute of Oceanography (India)

    Sheelu, G.; LokaBharathi, P.A.; Nair, S.; Raghukumar, C.; Mohandass, C.

    Deep sea sediments from Central Indian Ocean Basin (CIOB) were sampled from 10 degrees .00'-10 degrees .10'S latitude and 75 degrees .55'-76 degrees .05'E longitude for assessing the potential environmental impact of polymetallic nodule mining under...

  17. Multidimensional kernel estimation

    CERN Document Server

    Milosevic, Vukasin

    2015-01-01

    Kernel estimation is one of the non-parametric methods used for estimation of probability density function. Its first ROOT implementation, as part of RooFit package, has one major issue, its evaluation time is extremely slow making in almost unusable. The goal of this project was to create a new class (TKNDTree) which will follow the original idea of kernel estimation, greatly improve the evaluation time (using the TKTree class for storing the data and creating different user-controlled modes of evaluation) and add the interpolation option, for 2D case, with the help of the new Delaunnay2D class.

  18. Multi-pitch estimation

    CERN Document Server

    Christensen, Mads

    2009-01-01

    Periodic signals can be decomposed into sets of sinusoids having frequencies that are integer multiples of a fundamental frequency. The problem of finding such fundamental frequencies from noisy observations is important in many speech and audio applications, where it is commonly referred to as pitch estimation. These applications include analysis, compression, separation, enhancement, automatic transcription and many more. In this book, an introduction to pitch estimation is given and a number of statistical methods for pitch estimation are presented. The basic signal models and associated es

  19. Power system state estimation

    CERN Document Server

    Ahmad, Mukhtar

    2012-01-01

    State estimation is one of the most important functions in power system operation and control. This area is concerned with the overall monitoring, control, and contingency evaluation of power systems. It is mainly aimed at providing a reliable estimate of system voltages. State estimator information flows to control centers, where critical decisions are made concerning power system design and operations. This valuable resource provides thorough coverage of this area, helping professionals overcome challenges involving system quality, reliability, security, stability, and economy.Engineers are

  20. Robust global motion estimation

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A global motion estimation method based on robust statistics is presented in this paper. By using tracked feature points instead of whole image pixels to estimate parameters the process speeds up. To further speed up the process and avoid numerical instability, an alterative description of the problem is given, and three types of solution to the problem are compared. By using a two step process, the robustness of the estimator is also improved. Automatic initial value selection is an advantage of this method. The proposed approach is illustrated by a set of examples, which shows good results with high speed.

  1. Ecological research on offshore wind energy development in the North and Baltic sea. Part: Environmental planning instruments: Environmental Impacts Assessment (EIA), Habitats Assessment and Strategic Environmetnal Assessment (SEA). Volumes 1-4 and final report; Oekologische Begleitforschung zur Windenergienutzung im Offshore-Bereich der Nord- und Ostsee. Teilbereich 'Instrumente des Umwelt- und Naturschutzes: Strategische Umweltpruefung, Umweltvertraeglichkeitspruefung und Flora-Fauna-Habitat-Vertraeglichkeitspruefung'. Band 1-4 und Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Koeppel, J.; Langenheld, A.; Peters, W.; Wende, W.; Sommer, S.; Finger, A.; Koeller, J.; Kraetzschmer, D.; Kerber, N.; Mahlburg, S.; Mueller, C.

    2003-07-01

    Within the licensing procedure of offshore wind farms several environmental planning instruments have to be taken into account to assess the probable effects of turbines on the marine environment. So far only little experiences were available on how to fulfil legal and methodical demands with regard to these environmental planning instruments offshore. Hence it was the principle task of this project to analyse how instruments like the environmental impacts assessment (EIA), the habitats assessment and the strategic environmental assessment (SEA) can be adapted to the special conditions of the marine environment and the legal requirements of the licensing procedure in the German EEZ according to the offshore installations ordinance. Since according to the offshore installations ordinance the construction and operation of offshore wind farms can only be refused for environmental reasons when the marine environment is endangered, the project first investigated for different aspects of the marine environment (e.g. marine mammals, birds, benthos, visual landscape) which kind of conflicts can possibly be caused by the construction and operation of turbines and of which legal significance they are with regard to the licensing procedure. Referring to those environmental impacts which have been considered as relevant for the licensing procedure the state of knowledge has been investigated by means of expert interviews and literature research. Practicable starting points for the impact assessment were suggested. With regard to the required environmental assessment within the licensing procedure one result of the project is a structured documentation of the standard of knowledge (volume I). Further on the project developed proposals for the application of the planning instruments EIA, habitats assessment and SEA offshore based on legal regulations. The result is a catalogue of requirements regarding the content and proceedings of the instruments implementation in connection

  2. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    Yi DAI; Zhao-jun WANG; Chang-liang ZOU

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method.Sullivan and woodall pointed out the test statistic lrt (n1, n2) is approximately distributed as x2 (2) as the sample size n, n1 and n2 are very large, and the value of n1 = 2, 3,..., n- 2 and that of n2 = n- n1.So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained.In addition, the properties of the standardized likelihood ratio statistic slr(n1,n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i ≠ n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both.Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  3. CUSUM control charts based on likelihood ratio for preliminary analysis

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    To detect and estimate a shift in either the mean and the deviation or both for the preliminary analysis, the statistical process control (SPC) tool, the control chart based on the likelihood ratio test (LRT), is the most popular method. Sullivan and woodall pointed out the test statistic lrt(n1, n2) is approximately distributed as x2(2) as the sample size n,n1 and n2 are very large, and the value of n1 = 2,3,..., n - 2 and that of n2 = n - n1. So it is inevitable that n1 or n2 is not large. In this paper the limit distribution of lrt(n1, n2) for fixed n1 or n2 is figured out, and the exactly analytic formulae for evaluating the expectation and the variance of the limit distribution are also obtained. In addition, the properties of the standardized likelihood ratio statistic slr(n1, n) are discussed in this paper. Although slr(n1, n) contains the most important information, slr(i, n)(i≠n1) also contains lots of information. The cumulative sum (CUSUM) control chart can obtain more information in this condition. So we propose two CUSUM control charts based on the likelihood ratio statistics for the preliminary analysis on the individual observations. One focuses on detecting the shifts in location in the historical data and the other is more general in detecting a shift in either the location and the scale or both. Moreover, the simulated results show that the proposed two control charts are, respectively, superior to their competitors not only in the detection of the sustained shifts but also in the detection of some other out-of-control situations considered in this paper.

  4. Cost function estimation

    DEFF Research Database (Denmark)

    Andersen, C K; Andersen, K; Kragh-Sørensen, P

    2000-01-01

    on these criteria, a two-part model was chosen. In this model, the probability of incurring any costs was estimated using a logistic regression, while the level of the costs was estimated in the second part of the model. The choice of model had a substantial impact on the predicted health care costs, e......Statistical analysis of cost data is often difficult because of highly skewed data resulting from a few patients who incur high costs relative to the majority of patients. When the objective is to predict the cost for an individual patient, the literature suggests that one should choose...... a regression model based on the quality of its predictions. In exploring the econometric issues, the objective of this study was to estimate a cost function in order to estimate the annual health care cost of dementia. Using different models, health care costs were regressed on the degree of dementia, sex, age...

  5. Estimation of food consumption

    Energy Technology Data Exchange (ETDEWEB)

    Callaway, J.M. Jr.

    1992-04-01

    The research reported in this document was conducted as a part of the Hanford Environmental Dose Reconstruction (HEDR) Project. The objective of the HEDR Project is to estimate the radiation doses that people could have received from operations at the Hanford Site. Information required to estimate these doses includes estimates of the amounts of potentially contaminated foods that individuals in the region consumed during the study period. In that general framework, the objective of the Food Consumption Task was to develop a capability to provide information about the parameters of the distribution(s) of daily food consumption for representative groups in the population for selected years during the study period. This report describes the methods and data used to estimate food consumption and presents the results developed for Phase I of the HEDR Project.

  6. Bridged Race Population Estimates

    Data.gov (United States)

    U.S. Department of Health & Human Services — Population estimates from "bridging" the 31 race categories used in Census 2000, as specified in the 1997 Office of Management and Budget (OMB) race and ethnicity...

  7. Single snapshot DOA estimation

    OpenAIRE

    Häcker, P.; Yang, B.

    2010-01-01

    In array signal processing, direction of arrival (DOA) estimation has been studied for decades. Many algorithms have been proposed and their performance has been studied thoroughly. Yet, most of these works are focused on the asymptotic case of a large number of snapshots. In automotive radar applications like driver assistance systems, however, only a small number of snapshots of the radar sensor array or, in the worst case, a single snapshot is available for DOA estimation...

  8. A Preliminary Study on Estimate of Economic Cost of Radiation Detriment

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    7APreliminaryStudyonEstimateofEconomicCostofRadiationDetrimentXiaYihua;ThangLiDong;LiucanGanLin;LiangShiqiangThebasicassumpti...

  9. A global mean dynamic topography and ocean circulation estimation using a preliminary GOCE gravity model

    DEFF Research Database (Denmark)

    Knudsen, Per; Bingham, R.; Andersen, Ole Baltazar

    2011-01-01

    The Gravity and steady-state Ocean Circulation Explorer (GOCE) satellite mission measures Earth’s gravity field with an unprecedented accuracy at short spatial scales. In doing so, it promises to significantly advance our ability to determine the ocean’s general circulation. In this study......, an initial gravity model from GOCE, based on just 2 months of data, is combined with the recent DTU10MSS mean sea surface to construct a global mean dynamic topography (MDT) model. The GOCE MDT clearly displays the gross features of the ocean’s steady-state circulation. More significantly, the improved...... gravity model provided by the GOCE mission has enhanced the resolution and sharpened the boundaries of those features compared with earlier satellite only solutions. Calculation of the geostrophic surface currents from the MDT reveals improvements for all of the ocean’s major current systems. In the North...

  10. A preliminary study on estimating extra-cellular nitrate reductase activities in estuarine systems

    Directory of Open Access Journals (Sweden)

    Pant H. K.

    2009-07-01

    Full Text Available Enzymes catalyzing ammonium (NH4+/nitrate (NO3– into nitrous oxide (N2O/molecular nitrogen (N2, play critical roles in water quality management. The objective of this paper was to investigate the role of extra-cellular enzymes in cycling of nitrogen (N in aquatic systems. It appears that N in estuaries, salt marshes, etc., does not stay long enough to be available for uptake, thus, creating N limited conditions. This study showed that indigenous extra-cellular nitrate reductase along with others involved in N transformations in the waters/sediments of estuarine systems can cause complete removal of NH4+ and NO3– from the waters and available NH4+ and NO3– from the sediments. These results indicate that due to high extra-cellular nitrate reductase and other enzymes associated with N transformations in sediments/waters, substantial amounts of NH4+ and NO3– can be quickly lost from the systems as N2O and/or nitric oxide (NO, in turn, creating N limited conditions in estuarine systems. Such high activities of indigenous nitrate reductase and others are useful in removing readily bioavailable N from the systems, thereby avoidance of eutrophic conditions. However, they might contribute in increasing the N2O, a potent greenhouse gas with global warming potential (GWP of 296, in the atmosphere.

  11. Preliminary investigation on reliability of genomic estimated breeding values in the Danish and Swedish Holstein Population

    DEFF Research Database (Denmark)

    Su, G; Guldbrandtsen, B; Gregersen, V R

    2010-01-01

    were available. In the analysis, all SNP were fitted simultaneously as random effects in a Bayesian variable selection model, which allows heterogeneous variances for different SNP markers. The response variables were the official EBV. Direct GEBV were calculated as the sum of individual SNP effects...... for all 18 index traits. Reliability of GEBV was assessed by squared correlation between GEBV and conventional EBV (r2GEBV, EBV), and expected reliability was obtained from prediction error variance using a 5-fold cross validation. Squared correlations between GEBV and published EBV (without any...... that genomic selection can greatly improve the accuracy of preselection for young bulls compared with traditional selection based on parent average information....

  12. Post Detection Target State Estimation Using Heuristic Information Processing - A Preliminary Investigation

    Science.gov (United States)

    1977-09-01

    8217~’ 󈧐 46 1F’.)l’TR Ff1’.1)uUTO 112 I-AtR b os ’ri i Cf^.U-~~ GLP1 , ],CU I) 0IS2. =ý E 14 5...CALLt G"r1P(1.2,O *C ILL ,I OENT(IP 01N 0LT)R-ýQ.C 0Ul. V...joy stick. The light pen Is one of the most commonly used devices. It consists of a hand-held fiber -optic tube that can be "pointed" at a light source

  13. Preliminary Estimate for Injury Criterion to Immediate Incapacitation by Projectile Penetration

    Science.gov (United States)

    2012-01-01

    F ble. The gen g (LN), liver structure and puterMan . Co uation of reta , and are ual to 0.5 cm is the mass o sionless shap re exerted b...leng Typi for d occu resu and and 11. tissu Ratio of e immediate , equivalent tive backward equivalent mu al cord of 0 m act of the pr puterMan ...following E (MS). following d ness is calc alculation ba s is calculated efore assume the spinal c e calculations puterMan t m and 7.62 f diameter 5 nd

  14. EXPERIMENTAL METHODOLOGIES AND PRELIMINARY TRANSFER FACTOR DATA FOR ESTIMATION OF DERMAL EXPOSURES TO PARTICLES

    Science.gov (United States)

    Developmental efforts and experimental data are described that focused on quantifying the transfer of particles on a mass basis from indoor surfaces to human skin. Methods were developed that utilized a common fluorescein-tagged Arizona Test Dust (ATD) as a possible surrogate ...

  15. Preliminary Weight Savings Estimate for a Commercial Transport Wing Using Rod-Stiffened Stitched Composite Technology

    Science.gov (United States)

    Lovejoy, Andrew E.

    2015-01-01

    A structural concept called pultruded rod stitched efficient unitized structure (PRSEUS) was developed by the Boeing Company to address the complex structural design aspects associated with a pressurized hybrid wing body (HWB) aircraft configuration. While PRSEUS was an enabling technology for the pressurized HWB structure, limited investigation of PRSEUS for other aircraft structures, such as circular fuselages and wings, has been done. Therefore, a study was undertaken to investigate the potential weight savings afforded by using the PRSEUS concept for a commercial transport wing. The study applied PRSEUS to the Advanced Subsonic Technology (AST) Program composite semi-span test article, which was sized using three load cases. The initial PRSEUS design was developed by matching cross-sectional stiffnesses for each stringer/skin combination within the wing covers, then the design was modified to ensure that the PRSEUS design satisfied the design criteria. It was found that the PRSEUS wing design exhibited weight savings over the blade-stiffened composite AST Program wing of nearly 9%, and a weight savings of 49% and 29% for the lower and upper covers, respectively, compared to an equivalent metallic wing.

  16. Preliminary results in surgery of Parkinson's disease.

    Science.gov (United States)

    Nasser, J A; Confort, C I; Ferraz, A; Bouza, A A

    1998-09-01

    The authors present the preliminary results of 20 patients selected to be operated on between January 1996 and April 1997. These patients presented one of the present indications for stereotactic posteroventral pallidotomy (PVP), such as: rigidity, akinesia/bradykinesia, gait dysfunction, drug induced dyskinesias and tremor. Every patient of this protocol was evaluated by: UPDRS score, Schwab and England scale, Hoehn and Yahr Staging Scale before and after surgery. The results in 3 months showed a remarkable improvement after PVP (P < 0.01) in all functional assessments, except for facial expression, speech and posture. The morbidity was 5%. 5 patients (25%) who were in Hoehn and Yahr 5 underwent a bilateral simultaneous PVP. In 5 patients (25%), who had tremor, during the PVP, VIM thalamotomy was added. These preliminary results, suggest that PVP is highly effective for PD symptoms.

  17. Nevada potential repository preliminary transportation strategy: Study 1

    Energy Technology Data Exchange (ETDEWEB)

    None,

    1995-04-01

    Limited feasible options exist when considering the shipment of spent nuclear fuel and high-level radioactive waste. These options are rail or truck; because of the weight associated with transportation casks (68.0 to 113.4 tonnes/75 to 125 tons), heavy-haul trucks are also considered. Yucca Mountain currently lacks rail service or an existing right-of-way for rail; it also lacks a dedicated highway suitable for heavy-haul trucks. Approximately 11,230 shipments by rail are planned from waste producer sites to Nevada, with an additional 1,041 shipments by legal-weight truck from four reactor sites not capable of upgrading for rail shipment. This study identifies the reasonable alternatives for waste transport to the potential repository site, describes the evaluation process performed to identify those alternatives, and discusses the reasons for elimination of transportation routes deemed to be not reasonable. The study concluded that heavy haul truck transportation is feasible-cost is very favorable when compared to rail-but route restrictions must be further evaluated. In addition to restrictions due to seasonal weather conditions, specific routes have additional restrictions, including no travel on holidays or weekends, and travel during daylight hours only. Further restrictions will be imposed by the U.S. Department of Transportation based on routing of radioactive materials by highway. Operation and maintenance costs for heavy-haul over a 24-year period, based on preliminary information, were calculated on an estimated operational cost of $15,000 per trip, with an estimated 468 trips per year average (11,230 total trips), for an estimated cost of $171 million to $173 million, depending on the route used. Because the initial costs and the total system life cycle costs of heavy-haul are approximately 50 percent lower than the lowest rail cost, this option will continue to be evaluated.

  18. Breast ultrasound tomography with two parallel transducer arrays: preliminary clinical results

    Science.gov (United States)

    Huang, Lianjie; Shin, Junseob; Chen, Ting; Lin, Youzuo; Intrator, Miranda; Hanson, Kenneth; Epstein, Katherine; Sandoval, Daniel; Williamson, Michael

    2015-03-01

    Ultrasound tomography has great potential to provide quantitative estimations of physical properties of breast tumors for accurate characterization of breast cancer. We design and manufacture a new synthetic-aperture breast ultrasound tomography system with two parallel transducer arrays. The distance of these two transducer arrays is adjustable for scanning breasts with different sizes. The ultrasound transducer arrays are translated vertically to scan the entire breast slice by slice and acquires ultrasound transmission and reflection data for whole-breast ultrasound imaging and tomographic reconstructions. We use the system to acquire patient data at the University of New Mexico Hospital for clinical studies. We present some preliminary imaging results of in vivo patient ultrasound data. Our preliminary clinical imaging results show promising of our breast ultrasound tomography system with two parallel transducer arrays for breast cancer imaging and characterization.

  19. Preliminary result of a three dimensional numerical simulation of cloud formation over a cooling pond

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, T.

    1978-01-01

    Cooling ponds receive large amounts of waste heat from industrial sources and release the heat to the atmosphere. These large area sources of warm and moist air may have significant inadvertent effects. This paper is a preliminary step in the development of a method for estimating the perturbations in the atmosphere produced by a cooling pond. A three-dimensional numerical model based on turbulence second-moment closure equations and Gaussian cloud relations has been developed. A simplified version of the model, in which only turbulent energy and length-scale equations are solved prognostically, is used. Numerical simulations are conducted using as boundary conditions the data from a cooling pond study conducted in northern Illinois during the winter of 1976-1977. Preliminary analyses of these simulations indicate that formation of clouds over a cooling pond is sensitive to the moisture content in the ambient atmosphere.

  20. Preliminary results of an extensive study of fragmentation measurements for medical and space applications

    CERN Document Server

    Agodi, C; Calabretta, L; Cirrone, G A P C; Cuttone, G; De Napoli, M; Fiorini, F; Giacoppo, F; Mairani, A; Morone, M C; Patera, V; Raciti, G; Rapisarda, E; Ricciardi, V; Romano, F; Sala, P; Sciubba, A

    2010-01-01

    Here we report on preliminary results of an extensive study of fragmentation cross sections measurements useful for medical and space applications. In particular, we looked at the hadrontherapy and space radiation research. Indeed, the measure of fragmentation cross sections is an important information to estimate how this process modifies dose distributions and biological effectiveness, both inside human body and spacecraft. In this picture we started to measure the fragmentation of 12C beam accelerated by the Superconducting Cyclotron at 32 AMeV, 62 AMeV on 12C, 207Pb and 197Au at the INFN Laboratory Nazionali del Sud in Catania (Italy). Preliminary comparison between absolute cross-sections measured for the systems: 12C+207Pb at 32AMeV and for 12C+197Au at 62AMeV is performed.

  1. Oxygen Consumption of Tilapia and Preliminary Mass Flows through a Prototype Closed Aquaculture System

    Science.gov (United States)

    Muller, Matthew S.; Bauer, Clarence F.

    1994-01-01

    Performance of NASA's prototype CELSS Breadboard Project Closed Aquaculture System was evaluated by estimating gas exchange quantification and preliminary carbon and nitrogen balances. The total system oxygen consumption rate was 535 mg/hr kg/fish (cv = 30%) when stocked with Tilapia aurea populations (fresh weights of 97 +/- 19 to 147 +/- 36 g/fish for various trials). Oxygen consumption by T. aurea (260 mg/hr kg/fish) contributed to approximately one-half of total system demand. Continuous carbon dioxide quantification methods were analyzed using the,relation of carbon dioxide to oxygen consumption. Overall food conversion rates averaged 18.2 +/- 3.2%. Major pathways for nitrogen and carbon in the system were described with preliminary mass closure of 60-80% and 60% for nitrogen and carbon.

  2. Fukushima. A preliminary assessment in July 2011; Fukushima. Eine vorlaeufige Bilanz im Juli 2011

    Energy Technology Data Exchange (ETDEWEB)

    Michel, Rolf

    2011-07-01

    Four months after the reactor accidents in Fukushima Daiichi a preliminary assessment of the accident sequence vents is performed based on the available incomplete information. The following topics are discussed: initiating events and accident sequences, radioactive materials release and dispersion, fundamentals on radiation exposure following the accident in the nuclear power plant Fukushima Daiichi, contamination of food stuff, fission product release into the Pacific Ocean, source tern and external radiation exposure in the first year, preliminary radiological assessment, radiological situation throughout the different accident phases (radioactive cloud and fallout, late phase), estimation of radiation exposure in the first year due to decay of short-lived radionuclides based on the state end of July 2011, comparison of the reactor accidents in Chernobyl and Fukushima Daiichi.

  3. Solar Central Receiver Prototype Heliostat. Volume II. Phase II planning (preliminary)

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    A currently planned DOE program will develop and construct a 10 MW/sub e/ Pilot Plant to demonstrate the feasibility and operational characteristics of Solar Central Receiver Power Generation. The field of heliostats is a major element of the Solar Central Receiver Power Generation system. The primary objective of the program described is to establish and verify the manufacturability, performance, durability, and maintenance requirements of the commercial plant heliostat design. End products of the 16 month effort include: (1) design, fabrication, and test of heliostats; (2) preliminary designs of manufacturing, assembly, installation, and maintenance processes for quantity production; (3) detailed design of critical tooling or other special equipment for such processes; (4) refined cost estimates for heliostats and maintenance; and (5) an updated commercial plant heliostat preliminary design. The program management and control system is discussed. (WHK)

  4. Rare earth optogalvanic spectroscopy: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Destro, Marcelo G.; Neri, Jose W.; Rodrigues, Nicolau A.S.; Silveira, Carlos A.B.; Riva, Rudimar [Instituto de Estudos Avancados (IEAv/EFO), Sao Jose dos Campos, SP (Brazil). Div. de Fotonica]. E-mail: destro@ieav.cta.br; Victor, Alessandro R. [Instituto Tecnologico de Aeronautica (ITA), Sao Jose dos Campos, SP (Brazil)

    2008-07-01

    The IEAv has special interest in the studies of rare earth isotope applications in laser medium and integrated optics as well as aerospace research. We are starting to work with Ytterbium, Erbium, Dysprosium and Neodymium laser selective photoionization research. This paper describes the preliminary results of emission and optogalvanic spectroscopy obtained from a Neodymium hollow cathode lamps. Furthermore these results were used to setup our laser systems to work to leads a Nd isotopes selective laser photoionization. (author)

  5. Institutional Repositories in India: A preliminary study

    OpenAIRE

    2011-01-01

    This preliminary study investigates various aspects of institutional repositories (IR’s) developed in India. The present study has identified the existence of 16 functional IRs some of which were not registered in any of the directories such as ROAR, Open DOAR. The study explores the timeline involved in planning, pilot testing, to system implementation of IR, exploratory activities conducted before implementing IR, its anticipated benefits.

  6. A Toolbox for Rotorcraft Preliminary Design

    OpenAIRE

    Lier, Max; Krenik, Alex; Kunze, Philipp; Kohlgrüber, Dieter; Schwinn, Dominik; Lützenberger, Marius

    2015-01-01

    The German Aerospace Center (DLR) developed a toolbox, which is able to reflect the conceptual and preliminary design process of rotorcraft configuration. Such a toolbox is a valuable aid for the design engineer and can be used for the assessment of new technologies with regard to the overall configuration. This toolbox is currently extended to model novel rotorcraft configurations. Automated optimization procedures will be added in the future as well. This paper describes the too...

  7. Preliminary safety analysis methodology for the SMART

    Energy Technology Data Exchange (ETDEWEB)

    Bae, Kyoo Hwan; Chung, Y. J.; Kim, H. C.; Sim, S. K.; Lee, W. J.; Chung, B. D.; Song, J. H. [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2000-03-01

    This technical report was prepared for a preliminary safety analysis methodology of the 330MWt SMART (System-integrated Modular Advanced ReacTor) which has been developed by Korea Atomic Energy Research Institute (KAERI) and funded by the Ministry of Science and Technology (MOST) since July 1996. This preliminary safety analysis methodology has been used to identify an envelope for the safety of the SMART conceptual design. As the SMART design evolves, further validated final safety analysis methodology will be developed. Current licensing safety analysis methodology of the Westinghouse and KSNPP PWRs operating and under development in Korea as well as the Russian licensing safety analysis methodology for the integral reactors have been reviewed and compared to develop the preliminary SMART safety analysis methodology. SMART design characteristics and safety systems have been reviewed against licensing practices of the PWRs operating or KNGR (Korean Next Generation Reactor) under construction in Korea. Detailed safety analysis methodology has been developed for the potential SMART limiting events of main steam line break, main feedwater pipe break, loss of reactor coolant flow, CEA withdrawal, primary to secondary pipe break and the small break loss of coolant accident. SMART preliminary safety analysis methodology will be further developed and validated in parallel with the safety analysis codes as the SMART design further evolves. Validated safety analysis methodology will be submitted to MOST as a Topical Report for a review of the SMART licensing safety analysis methodology. Thus, it is recommended for the nuclear regulatory authority to establish regulatory guides and criteria for the integral reactor. 22 refs., 18 figs., 16 tabs. (Author)

  8. PLANT COMMUNITIES OF ALBANIA - A PRELIMINARY OVERVIEW

    Directory of Open Access Journals (Sweden)

    J. DRING

    2002-04-01

    Full Text Available The phytosociological analysis of Albania was initiated by F. Markgraf in the 30ies, but still remains incomplete. This is a preliminary list of the plant communities resulting from the literature and from field research carried out during the last years and may represent a first contribution for further research. Many communities are described only by dominant species, other are quoted as nomina nuda. Some further syntaxa. probably present in the study area, are added.

  9. PLANT COMMUNITIES OF ALBANIA - A PRELIMINARY OVERVIEW

    Directory of Open Access Journals (Sweden)

    J, RODWELL

    2002-01-01

    Full Text Available The phytosociological analysis of Albania was initiated by F. Markgraf in the 30ies, but still remains incomplete. This is a preliminary list of the plant communities resulting from the literature and from field research carried out during the last years and may represent a first contribution for further research. Many communities are described only by dominant species, other are quoted as nomina nuda. Some further syntaxa. probably present in the study area, are added.

  10. [Tonsillectomy with a laser dissector. Preliminary report].

    Science.gov (United States)

    Lenz, H

    1984-11-01

    A so called laser-dissector with a flexible beam guide system for tonsillectomy is described. With this instrument the tissue is irradiated for a very short time resulting in a coagulation of the peritonsillar tissue with closure of the small vessels even before mechanical dissection is performed. A preliminary report of 10 patients is given. The main advantage is that the procedure could be performed without or with much less bleeding as in tonsillectomy without using vasoconstrictors.

  11. Preliminary Analysis of Google+'s Privacy

    OpenAIRE

    2011-01-01

    In this paper we provide a preliminary analysis of Google+ privacy. We identified that Google+ shares photo metadata with users who can access the photograph and discuss its potential impact on privacy. We also identified that Google+ encourages the provision of other names including maiden name, which may help criminals performing identity theft. We show that Facebook lists are a superset of Google+ circles, both functionally and logically, even though Google+ provides a better user interfac...

  12. Concordance of interim and final estimates of influenza vaccine effectiveness: a systematic review.

    Science.gov (United States)

    Leung, Vivian K; Cowling, Benjamin J; Feng, Shuo; Sullivan, Sheena G

    2016-04-21

    The World Health Organization's Global Influenza Surveillance and Response System meets twice a year to generate a recommendation for the composition of the seasonal influenza vaccine. Interim vaccine effectiveness (VE) estimates provide a preliminary indication of influenza vaccine performance during the season and may be useful for decision making. We reviewed 17 pairs of studies reporting 33 pairs of interim and final estimates using the test-negative design to evaluate whether interim estimates can reliably predict final estimates. We examined features of the study design that may be correlated with interim estimates being substantially different from their final estimates and identified differences related to change in study period and concomitant changes in sample size, proportion vaccinated and proportion of cases. An absolute difference of no more than 10% between interim and final estimates was found for 18 of 33 reported pairs of estimates, including six of 12 pairs reporting VE against any influenza, six of 10 for influenza A(H1N1)pdm09, four of seven for influenza A(H3N2) and two of four for influenza B. While we identified inconsistencies in the methods, the similarities between interim and final estimates support the utility of generating and disseminating preliminary estimates of VE while virus circulation is ongoing.

  13. Estimating the vertical structure of intense Mediterranean precipitation using two X-band weather radar systems

    NARCIS (Netherlands)

    Berne, A.D.; Delrieu, G.; Andrieu, H.

    2005-01-01

    The present study aims at a preliminary approach of multiradar compositing applied to the estimation of the vertical structure of precipitation¿an important issue for radar rainfall measurement and prediction. During the HYDROMET Integrated Radar Experiment (HIRE¿98), the vertical profile of

  14. Estimation of regional intensity-duration-frequency curves for extreme precipitation

    DEFF Research Database (Denmark)

    Madsen, Henrik; Mikkelsen, Peter Steen; Rosbjerg, Dan;

    1998-01-01

    Regional estimation of extreme precipitation from a high resolution rain gauge network in Denmark is considered. The applied extreme value model is based on the partial duration series (PDS) approach in which all events above a certain threshold level are modelled. For a preliminary assessment...

  15. Loss of life estimation in flood risk assessment; theory and applications

    NARCIS (Netherlands)

    Jonkman, S.N.

    2007-01-01

    The flooding of New Orleans due to hurricane Katrina in the year 2005 showed the world the catastrophic consequences of large-scale floods. This dissertation presents a method for the estimation of loss of life caused by the flooding of low-lying delta areas. It also includes a preliminary analysis

  16. Maximum-likelihood Estimation of 3D Event Position in Monolithic Scintillation Crystals: Experimental Results

    OpenAIRE

    Moore, S K; Hunter, W C J; Furenlid, L.R.; Barrett, H. H.

    2007-01-01

    We present a simple 3D event position-estimation method using raw list-mode acquisition and maximum-likelihood estimation in a modular gamma camera with a thick (25mm) monolithic scintillation crystal. This method involves measuring 2D calibration scans with a well-collimated 511 keV source and fitting each point to a simple depth-dependent light distribution model. Preliminary results show that angled collimated beams appear properly reconstructed.

  17. A method to estimate weight and dimensions of large and small gas turbine engines

    Science.gov (United States)

    Onat, E.; Klees, G. W.

    1979-01-01

    A computerized method was developed to estimate weight and envelope dimensions of large and small gas turbine engines within + or - 5% to 10%. The method is based on correlations of component weight and design features of 29 data base engines. Rotating components were estimated by a preliminary design procedure which is sensitive to blade geometry, operating conditions, material properties, shaft speed, hub tip ratio, etc. The development and justification of the method selected, and the various methods of analysis are discussed.

  18. Single snapshot DOA estimation

    Science.gov (United States)

    Häcker, P.; Yang, B.

    2010-10-01

    In array signal processing, direction of arrival (DOA) estimation has been studied for decades. Many algorithms have been proposed and their performance has been studied thoroughly. Yet, most of these works are focused on the asymptotic case of a large number of snapshots. In automotive radar applications like driver assistance systems, however, only a small number of snapshots of the radar sensor array or, in the worst case, a single snapshot is available for DOA estimation. In this paper, we investigate and compare different DOA estimators with respect to their single snapshot performance. The main focus is on the estimation accuracy and the angular resolution in multi-target scenarios including difficult situations like correlated targets and large target power differences. We will show that some algorithms lose their ability to resolve targets or do not work properly at all. Other sophisticated algorithms do not show a superior performance as expected. It turns out that the deterministic maximum likelihood estimator is a good choice under these hard conditions.

  19. Contingent kernel density estimation.

    Directory of Open Access Journals (Sweden)

    Scott Fortmann-Roe

    Full Text Available Kernel density estimation is a widely used method for estimating a distribution based on a sample of points drawn from that distribution. Generally, in practice some form of error contaminates the sample of observed points. Such error can be the result of imprecise measurements or observation bias. Often this error is negligible and may be disregarded in analysis. In cases where the error is non-negligible, estimation methods should be adjusted to reduce resulting bias. Several modifications of kernel density estimation have been developed to address specific forms of errors. One form of error that has not yet been addressed is the case where observations are nominally placed at the centers of areas from which the points are assumed to have been drawn, where these areas are of varying sizes. In this scenario, the bias arises because the size of the error can vary among points and some subset of points can be known to have smaller error than another subset or the form of the error may change among points. This paper proposes a "contingent kernel density estimation" technique to address this form of error. This new technique adjusts the standard kernel on a point-by-point basis in an adaptive response to changing structure and magnitude of error. In this paper, equations for our contingent kernel technique are derived, the technique is validated using numerical simulations, and an example using the geographic locations of social networking users is worked to demonstrate the utility of the method.

  20. Preliminary benefit-cost analysis of the Fast Flux Test Facility (FFTF) power addition

    Energy Technology Data Exchange (ETDEWEB)

    Callaway, J.M.; Lezberg, A.J.; Scott, M.J.; Tawil, J.J.

    1984-07-01

    The primary objective of this report is to conduct a preliminary benefit-cost study for the proposed power addition to FFTF to determine whether the project is cost-effective. If the project is authorized, construction will begin in 1986 and end in 1991. Full power operation is scheduled to begin in 1991 and a project life of 20 years is assumed. The undiscounted cost during the construction period of the FFTF power addition is estimated to be approximately $117 million over the construction period (1984 dollars). An additional $3 million is estimated as the opportunity cost - or value of these resources in their most favorable alternative use - of surplus FFTF equipment and unused CRBR equipment, including materials for steam generator fabrication. The annual operating and maintenance cost of the project is estimated to be about $2.1 million in 1984 dollars. 20 references.

  1. Numerical Estimation of the Spent Fuel Ratio

    Energy Technology Data Exchange (ETDEWEB)

    Lindgren, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Durbin, Samuel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wilke, Jason [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Margraf, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dunn, T. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-01-01

    Sabotage of spent nuclear fuel casks remains a concern nearly forty years after attacks against shipment casks were first analyzed and has a renewed relevance in the post-9/11 environment. A limited number of full-scale tests and supporting efforts using surrogate materials, typically depleted uranium dioxide (DUO 2 ), have been conducted in the interim to more definitively determine the source term from these postulated events. However, the validity of these large- scale results remain in question due to the lack of a defensible spent fuel ratio (SFR), defined as the amount of respirable aerosol generated by an attack on a mass of spent fuel compared to that of an otherwise identical surrogate. Previous attempts to define the SFR in the 1980's have resulted in estimates ranging from 0.42 to 12 and include suboptimal experimental techniques and data comparisons. Because of the large uncertainty surrounding the SFR, estimates of releases from security-related events may be unnecessarily conservative. Credible arguments exist that the SFR does not exceed a value of unity. A defensible determination of the SFR in this lower range would greatly reduce the calculated risk associated with the transport and storage of spent nuclear fuel in dry cask systems. In the present work, the shock physics codes CTH and ALE3D were used to simulate spent nuclear fuel (SNF) and DUO 2 targets impacted by a high-velocity jet at an ambient temperature condition. These preliminary results are used to illustrate an approach to estimate the respirable release fraction for each type of material and ultimately, an estimate of the SFR. This page intentionally blank

  2. Estimating the Upcrossings Index

    CERN Document Server

    Sebastião, João Renato; Ferreira, Helena; Pereira, Luísa

    2012-01-01

    For stationary sequences, under general local and asymptotic dependence restrictions, any limiting point process for time normalized upcrossings of high levels is a compound Poisson process, i.e., there is a clustering of high upcrossings, where the underlying Poisson points represent cluster positions, and the multiplicities correspond to cluster sizes. For such classes of stationary sequences there exists the upcrossings index $\\eta,$ $0\\leq \\eta\\leq 1,$ which is directly related to the extremal index $\\theta,$ $0\\leq \\theta\\leq 1,$ for suitable high levels. In this paper we consider the problem of estimating the upcrossings index $\\eta$ for a class of stationary sequences satisfying a mild oscillation restriction. For the proposed estimator, properties such as consistency and asymptotic normality are studied. Finally, the performance of the estimator is assessed through simulation studies for autoregressive processes and case studies in the fields of environment and finance.

  3. Risk estimates for bone

    Energy Technology Data Exchange (ETDEWEB)

    Schlenker, R.A.

    1981-01-01

    The primary sources of information on the skeletal effects of internal emitters in humans are the US radium cases with occupational and medical exposures to /sup 226/ /sup 228/Ra and the German patients injected with /sup 224/Ra primarily for treatment of ankylosing spondylitis and tuberculosis. During the past decade, dose-response data from both study populations have been used by committees, e.g., the BEIR committees, to estimate risks at low dose levels. NCRP Committee 57 and its task groups are now engaged in making risk estimates for internal emitters. This paper presents brief discussions of the radium data, the results of some new analyses and suggestions for expressing risk estimates in a form appropriate to radiation protection.

  4. Estimating the Counterfactual

    Directory of Open Access Journals (Sweden)

    Linda J. Blumberg PhD

    2016-04-01

    Full Text Available Time lags in receiving data from long-standing, large federal surveys complicate real-time estimation of the coverage effects of full Affordable Care Act (ACA implementation. Fast-turnaround household surveys fill some of the void in data on recent changes to insurance coverage, but they lack the historical data that allow analysts to account for trends that predate the ACA, economic fluctuations, and earlier public program expansions when predicting how many people would be uninsured without comprehensive health care reform. Using data from the Current Population Survey (CPS from 2000 to 2012 and the Health Reform Monitoring Survey (HRMS data for 2013 and 2015, this article develops an approach to estimate the number of people who would be uninsured in the absence of the ACA and isolates the change in coverage as of March 2015 that can be attributed to the ACA. We produce counterfactual forecasts of the number of uninsured absent the ACA for 9 age-income groups and compare these estimates with 2015 estimates based on HRMS relative coverage changes applied to CPS-based population estimates. As of March 2015, we find the ACA has reduced the number of uninsured adults by 18.1 million compared with the number who would have been uninsured at that time had the law not been implemented. That decline represents a 46% reduction in the number of nonelderly adults without insurance. The approach developed here can be applied to other federal data and timely surveys to provide a range of estimates of the overall effects of reform.

  5. Distribution load estimation - DLE

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A. [VTT Energy, Espoo (Finland)

    1996-12-31

    The load research project has produced statistical information in the form of load models to convert the figures of annual energy consumption to hourly load values. The reliability of load models is limited to a certain network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to make improvements in the load models. Distribution load estimation (DLE) is the method developed here to improve load estimates from the load models. The method is also quite cheap to apply as it utilises information that is already available in SCADA systems

  6. Generalized estimating equations

    CERN Document Server

    Hardin, James W

    2002-01-01

    Although powerful and flexible, the method of generalized linear models (GLM) is limited in its ability to accurately deal with longitudinal and clustered data. Developed specifically to accommodate these data types, the method of Generalized Estimating Equations (GEE) extends the GLM algorithm to accommodate the correlated data encountered in health research, social science, biology, and other related fields.Generalized Estimating Equations provides the first complete treatment of GEE methodology in all of its variations. After introducing the subject and reviewing GLM, the authors examine th

  7. Maximum likely scale estimation

    DEFF Research Database (Denmark)

    Loog, Marco; Pedersen, Kim Steenstrup; Markussen, Bo

    2005-01-01

    A maximum likelihood local scale estimation principle is presented. An actual implementation of the estimation principle uses second order moments of multiple measurements at a fixed location in the image. These measurements consist of Gaussian derivatives possibly taken at several scales and....../or having different derivative orders. Although the principle is applicable to a wide variety of image models, the main focus here is on the Brownian model and its use for scale selection in natural images. Furthermore, in the examples provided, the simplifying assumption is made that the behavior...... of the measurements is completely characterized by all moments up to second order....

  8. Estimating the plastic strain with the use of acoustic anisotropy

    Science.gov (United States)

    Belyaev, A. K.; Lobachev, A. M.; Modestov, V. S.; Pivkov, A. V.; Polyanskii, V. A.; Semenov, A. S.; Tret'yakov, D. A.; Shtukin, L. V.

    2016-09-01

    Experimental verification is used to show that reference specimens and structure unloading do not permit obtaining an adequate estimate of plastic strain by measuring the acoustic anisotropy. Analytic estimates of the speed of propagation of a plane acoustic wave of various polarizations in an elastoplastic material in the direction orthogonal to the action of preliminary uniaxial stress are obtained. An analysis of the obtained relations reveala an advantage of using absolute values of the velocity of longitudinal and transverse waves for the plastic strain identification. In contrast to acoustic anisotropy, the velocities vary monotonically in a wider range of plastic strains. At the same time, the elastic strain does not affect the longitude wave velocity, which allows one to use the measurement results to estimate the character of strains.

  9. Ability Estimation for Conventional Tests.

    Science.gov (United States)

    Kim, Jwa K.; Nicewander, W. Alan

    1993-01-01

    Bias, standard error, and reliability of five ability estimators were evaluated using Monte Carlo estimates of the unknown conditional means and variances of the estimators. Results indicate that estimates based on Bayesian modal, expected a posteriori, and weighted likelihood estimators were reasonably unbiased with relatively small standard…

  10. Toward a universal equation to estimate postmortem interval.

    Science.gov (United States)

    Maile, Amy E; Inoue, Christopher G; Barksdale, Larry E; Carter, David O

    2017-03-01

    Estimating postmortem interval is an important goal in medicolegal death investigations. Although several methods have been developed to achieve this goal, many of these require significant time and advanced expertise to generate a reliable estimate. Unfortunately these techniques do not provide much insight during the early stages of an investigation when critical decisions must be made regarding the allocation of investigative resources. An equation was recently developed to address this problem: provide a preliminary estimate of postmortem interval to initiate an investigation while more advanced techniques are conducted. To evaluate this equation, we used it to estimate postmortem interval at multiple indoor death scenes with known PMI in Nebraska and Hawai'i. This equation allowed us to accurately estimate PMI at 15 of 19 (79%) indoor death scenes. In Nebraska, this equation was accurate at 100% of the scenes. In Hawai'i, this equation was accurate at 60% of the scenes. All inaccurate estimates of postmortem interval were associated with at least 20% mass loss and a postmortem interval of ≥4 days. Although this equation was accurate at the majority of the death scenes attended, we conclude that more research is warranted, particularly the effect of climate on decomposition and the investigators' ability to accurately estimate soft tissue mass loss.

  11. Maximum-likelihood estimation of circle parameters via convolution.

    Science.gov (United States)

    Zelniker, Emanuel E; Clarkson, I Vaughan L

    2006-04-01

    The accurate fitting of a circle to noisy measurements of circumferential points is a much studied problem in the literature. In this paper, we present an interpretation of the maximum-likelihood estimator (MLE) and the Delogne-Kåsa estimator (DKE) for circle-center and radius estimation in terms of convolution on an image which is ideal in a certain sense. We use our convolution-based MLE approach to find good estimates for the parameters of a circle in digital images. In digital images, it is then possible to treat these estimates as preliminary estimates into various other numerical techniques which further refine them to achieve subpixel accuracy. We also investigate the relationship between the convolution of an ideal image with a "phase-coded kernel" (PCK) and the MLE. This is related to the "phase-coded annulus" which was introduced by Atherton and Kerbyson who proposed it as one of a number of new convolution kernels for estimating circle center and radius. We show that the PCK is an approximate MLE (AMLE). We compare our AMLE method to the MLE and the DKE as well as the Cramér-Rao Lower Bound in ideal images and in both real and synthetic digital images.

  12. Dose estimation software for radiation biodosimetry.

    Science.gov (United States)

    Ainsbury, Elizabeth A; Lloyd, David C

    2010-02-01

    Cytogenetic analysis of chromosome damage in blood lymphocytes is widely used for radiation biodosimetry. Mathematical and statistical analysis is extremely important for accurate assessment of the data and results, and there are a number of classical statistical methods which are routinely employed. However, the large number of different mathematical techniques, the dependence of the models on certain statistical principles, and the complexity of some of the methods can lead to errors in data analysis and thus misinterpretation of results. Cytogenetic dose estimation software has been developed to address these problems by simplifying mathematical and statistical analysis of the cytogenetic data. "Dose Estimate" is a collection of mathematical and statistical methods based on the cytogenetic methods that are used for biodosimetry at the Health Protection Agency and elsewhere in the radiation cytogenetics community. Details of the biological and mathematical tools incorporated into the software are presented. Preliminary testing has been carried out, and the results demonstrate the accuracy and usefulness of the software in its current form. Proposals for improving the software through implementation of recently published Bayesian analysis techniques for cytogenetics are also outlined. An evaluation copy of the software is available on request from the authors.

  13. Estimates of Savings Achievable from Irrigation Controller

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Alison; Fuchs, Heidi; Whitehead, Camilla Dunham

    2014-03-28

    This paper performs a literature review and meta-analysis of water savings from several types of advanced irrigation controllers: rain sensors (RS), weather-based irrigation controllers (WBIC), and soil moisture sensors (SMS).The purpose of this work is to derive average water savings per controller type, based to the extent possible on all available data. After a preliminary data scrubbing, we utilized a series of analytical filters to develop our best estimate of average savings. We applied filters to remove data that might bias the sample such as data self-reported by manufacturers, data resulting from studies focusing on high-water users, or data presented in a non-comparable format such as based on total household water use instead of outdoor water use. Because the resulting number of studies was too small to be statistically significant when broken down by controller type, this paper represents a survey and synthesis of available data rather than a definitive statement regarding whether the estimated water savings are representative.

  14. Star Tracker Performance Estimate with IMU

    Science.gov (United States)

    Aretskin-Hariton, Eliot D.; Swank, Aaron J.

    2015-01-01

    A software tool for estimating cross-boresight error of a star tracker combined with an inertial measurement unit (IMU) was developed to support trade studies for the Integrated Radio and Optical Communication project (iROC) at the National Aeronautics and Space Administration Glenn Research Center. Typical laser communication systems, such as the Lunar Laser Communication Demonstration (LLCD) and the Laser Communication Relay Demonstration (LCRD), use a beacon to locate ground stations. iROC is investigating the use of beaconless precision laser pointing to enable laser communication at Mars orbits and beyond. Precision attitude knowledge is essential to the iROC mission to enable high-speed steering of the optical link. The preliminary concept to achieve this precision attitude knowledge is to use star trackers combined with an IMU. The Star Tracker Accuracy (STAcc) software was developed to rapidly assess the capabilities of star tracker and IMU configurations. STAcc determines the overall cross-boresight error of a star tracker with an IMU given the characteristic parameters: quantum efficiency, aperture, apparent star magnitude, exposure time, field of view, photon spread, detector pixels, spacecraft slew rate, maximum stars used for quaternion estimation, and IMU angular random walk. This paper discusses the supporting theory used to construct STAcc, verification of the program and sample results.

  15. Estimation of vector velocity

    DEFF Research Database (Denmark)

    2000-01-01

    Using a pulsed ultrasound field, the two-dimensional velocity vector can be determined with the invention. The method uses a transversally modulated ultrasound field for probing the moving medium under investigation. A modified autocorrelation approach is used in the velocity estimation. The new...

  16. Estimating Gender Wage Gaps

    Science.gov (United States)

    McDonald, Judith A.; Thornton, Robert J.

    2011-01-01

    Course research projects that use easy-to-access real-world data and that generate findings with which undergraduate students can readily identify are hard to find. The authors describe a project that requires students to estimate the current female-male earnings gap for new college graduates. The project also enables students to see to what…

  17. Estimating Large Numbers

    Science.gov (United States)

    Landy, David; Silbert, Noah; Goldin, Aleah

    2013-01-01

    Despite their importance in public discourse, numbers in the range of 1 million to 1 trillion are notoriously difficult to understand. We examine magnitude estimation by adult Americans when placing large numbers on a number line and when qualitatively evaluating descriptions of imaginary geopolitical scenarios. Prior theoretical conceptions…

  18. Organizational flexibility estimation

    OpenAIRE

    Komarynets, Sofia

    2013-01-01

    By the help of parametric estimation the evaluation scale of organizational flexibility and its parameters was formed. Definite degrees of organizational flexibility and its parameters for the Lviv region enterprises were determined. Grouping of the enterprises under the existing scale was carried out. Special recommendations to correct the enterprises behaviour were given.

  19. Estimating nonlinear models

    Science.gov (United States)

    Billings, S. A.

    1988-03-01

    Time and frequency domain identification methods for nonlinear systems are reviewed. Parametric methods, prediction error methods, structure detection, model validation, and experiment design are discussed. Identification of a liquid level system, a heat exchanger, and a turbocharge automotive diesel engine are illustrated. Rational models are introduced. Spectral analysis for nonlinear systems is treated. Recursive estimation is mentioned.

  20. Numerical Estimation in Preschoolers

    Science.gov (United States)

    Berteletti, Ilaria; Lucangeli, Daniela; Piazza, Manuela; Dehaene, Stanislas; Zorzi, Marco

    2010-01-01

    Children's sense of numbers before formal education is thought to rely on an approximate number system based on logarithmically compressed analog magnitudes that increases in resolution throughout childhood. School-age children performing a numerical estimation task have been shown to increasingly rely on a formally appropriate, linear…

  1. Estimation of vector velocity

    DEFF Research Database (Denmark)

    2000-01-01

    Using a pulsed ultrasound field, the two-dimensional velocity vector can be determined with the invention. The method uses a transversally modulated ultrasound field for probing the moving medium under investigation. A modified autocorrelation approach is used in the velocity estimation. The new...

  2. Preliminary design of a coffee harvester

    Directory of Open Access Journals (Sweden)

    Raphael Magalhães Gomes Moreira

    2016-10-01

    Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

  3. Evaluation of the false recent classification rates of multiassay algorithms in estimating HIV type 1 subtype C incidence.

    Science.gov (United States)

    Moyo, Sikhulile; LeCuyer, Tessa; Wang, Rui; Gaseitsiwe, Simani; Weng, Jia; Musonda, Rosemary; Bussmann, Hermann; Mine, Madisa; Engelbrecht, Susan; Makhema, Joseph; Marlink, Richard; Baum, Marianna K; Novitsky, Vladimir; Essex, M

    2014-01-01

    Laboratory cross-sectional assays are useful for the estimation of HIV incidence, but are known to misclassify individuals with long-standing infection as recently infected. The false recent rate (FRR) varies widely across geographic areas; therefore, accurate estimates of HIV incidence require a locally defined FRR. We determined FRR for Botswana, where HIV-1 subtype C infection is predominant, using the BED capture enzyme immunoassay (BED), a Bio-Rad Avidity Index (BAI) assay (a modification of the Bio-Rad HIV1/2+O EIA), and two multiassay algorithms (MAA) that included clinical data. To estimate FRR, stored blood samples from 512 antiretroviral (ARV)-naive HIV-1 subtype C-infected individuals from a prospective cohort in Botswana were tested at 18-24 months postenrollment. The following FRR mean (95% CI) values were obtained: BED 6.05% (4.15-8.48), BAI 5.57% (3.70-8.0), BED-BAI 2.25% (1.13-4.0), and a combination of BED-BAI with CD4 (>200) and viral load (>400) threshold 1.43% (0.58-2.93). The interassay agreement between BED and BAI was 92.8% (95% CI, 90.1-94.5) for recent/long-term classification. Misclassification was associated with viral suppression for BED [adjusted OR (aOR) 10.31; p=0.008], BAI [aOR 9.72; p=0.019], and MAA1 [aOR 16.6; p=0.006]. Employing MAA can reduce FRR to <2%. A local FRR can improve cross-sectional HIV incidence estimates.

  4. Outlier Detection in Regression Using an Iterated One-Step Approximation to the Huber-Skip Estimator

    DEFF Research Database (Denmark)

    Johansen, Søren; Nielsen, Bent

    2013-01-01

    In regression we can delete outliers based upon a preliminary estimator and reestimate the parameters by least squares based upon the retained observations. We study the properties of an iteratively defined sequence of estimators based on this idea. We relate the sequence to the Huber......-skip estimator. We provide a stochastic recursion equation for the estimation error in terms of a kernel, the previous estimation error and a uniformly small error term. The main contribution is the analysis of the solution of the stochastic recursion equation as a fixed point, and the results...

  5. Preliminary investigations of piezoelectric based LED luminary

    DEFF Research Database (Denmark)

    Nielsen, Dennis; Andersen, Michael A. E.; Meyer, Kaspar Sinding

    2011-01-01

    This paper presents a preliminary study of PT (Piezoelectric Transformer) based SMPS’s (Switch Mode Power Supplies) for LED luminary. The unique properties of PTs (efficiency, power density and EMI) make them highly suitable for this application. Power stage topologies, rectifiers circuits......, modulation schemes, LEDs and LED driving conditions are analyzed. A prototype radial mode PT optimized for ZVS (Zero Voltage Switching) is designed. FEM (Final Element Method) and measurements validates the PT design. A prototype PT based AC/DC converter operating from european mains is proposed...

  6. Preliminary results from a new spin spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, J.G.; Bedrossian, P.J. [Lawrence Livermore National Lab., CA (United States); Cummins, T.R. [Univ. of Missouri, Rolla, MO (United States). Dept. of Physics] [and others

    1998-12-31

    The first preliminary results from a novel spectrometer for elementally-specific measurements of magnetic surfaces and ultrathin films are presented here. The key measurements are based upon spin-resolving and photon-dichroic photoelectron spectroscopy. True spin-resolution is achieved by the use of a Mini-Mott detection scheme. The photon-dichroic measurements include the variant magnetic x-ray linear dichroism (MXLD). Both a multi-channel, energy dispersive collection scheme as well as the spin-detecting Mini-Mott apparatus are used in data collection. The Spin Spectrometer is based at the Spectromicroscopy Facility (Beamline 7) at the Advanced Light Source.

  7. preliminary study of American legal culture

    Institute of Scientific and Technical Information of China (English)

    周杨

    2016-01-01

    This thesis is a preliminary study of American legal culture. Nowadays more and more scholars see the importance of legal culture and do studies on it. The author selects a number of American legal TV plays and movies; analyzes their topics, main characters, and plots; then finds out why United States adopt the legal system; what kind of legal culture it has; and how the legal culture is reflected in those movies and TV plays. The author hopes this thesis can work not only as an insight into the American legal culture, but also a source of reference for china to improve its legal system.

  8. Ecological economics - a special perspective? Preliminary reflections

    DEFF Research Database (Denmark)

    Røpke, Inge

    2002-01-01

    This paper reports on some preliminary reflections from a research project concerning ecological economics as a special perspective. As Clive Spash noted in a presentation at the ESEE conference in Cambridge, July 2001, ecological economics has reached the age of puberty, looks into the glass...... and searches its own identity. The identity seeking processes are visible in the large number of publications discussing the characteristics of ecological economics as well as the similarities to and differences from environmental economics. The present paper is a part of this stream. The paper is work...

  9. Preliminary results on nonparametric facial occlusion detection

    Directory of Open Access Journals (Sweden)

    Daniel LÓPEZ SÁNCHEZ

    2016-10-01

    Full Text Available The problem of face recognition has been extensively studied in the available literature, however, some aspects of this field require further research. The design and implementation of face recognition systems that can efficiently handle unconstrained conditions (e.g. pose variations, illumination, partial occlusion... is still an area under active research. This work focuses on the design of a new nonparametric occlusion detection technique. In addition, we present some preliminary results that indicate that the proposed technique might be useful to face recognition systems, allowing them to dynamically discard occluded face parts.

  10. Ozone Therapy on Cerebral Blood Flow: A Preliminary Report

    Directory of Open Access Journals (Sweden)

    Bernardino Clavo

    2004-01-01

    Full Text Available Ozone therapy is currently being used in the treatment of ischemic disorders, but the underlying mechanisms that result in successful treatment are not well known. This study assesses the effect of ozone therapy on the blood flow in the middle cerebral and common carotid arteries. Seven subjects were recruited for the therapy that was performed by transfusing ozone-enriched autologous blood on 3 alternate days over 1 week. Blood flow quantification in the common carotid artery (n = 14 was performed using color Doppler. Systolic and diastolic velocities in the middle cerebral artery (n = 14 were estimated using transcranial Doppler. Ultrasound assessments were conducted at the following three time points: 1 basal (before ozone therapy, 2 after session #3 and 3 1 week after session #3. The common carotid blood flow had increased by 75% in relation to the baseline after session #3 (P < 0.001 and by 29% 1 week later (P = 0.039. In the middle cerebral artery, the systolic velocity had increased by 22% after session #3 (P = 0.001 and by 15% 1 week later (P = 0.035, whereas the diastolic velocity had increased by 33% after session #3 (P < 0.001 and by 18% 1 week later (P = 0.023. This preliminary Doppler study supports the clinical experience of achieving improvement by using ozone therapy in peripheral ischemic syndromes. Its potential use as a complementary treatment in cerebral low perfusion syndromes merits further clinical evaluation.

  11. Preliminary Design Study of the Hollow Electron Lens for LHC

    CERN Document Server

    Perini, Diego; CERN. Geneva. ATS Department

    2017-01-01

    A Hollow Electron Lens (HEL) has been proposed in order to improve performance of halo control and collimation in the Large Hadron Collider in view of its High Luminosity upgrade (HL-LHC). The concept is based on a beam of electrons that travels around the protons for a few meters. The electron beam is produced by a cathode and then guided by a strong magnetic field generated by a set of superconducting solenoids. The first step of the design is the definition of the magnetic fields that drive the electron trajectories. The estimation of such trajectories by means of a dedicated MATLAB® tool is presented. The influence of the main geometrical and electrical parameters are analysed and discussed. Then, the main mechanical design choices for the solenoids, cryostats gun and collector are described. The aim of this paper is to provide an overview of the preliminary design of the Electron Lens for LHC. The methods used in this study also serve as examples for future mechanical and integration designs of similar ...

  12. Preliminary assessment of sponge biodiversity on Saba Bank, Netherlands Antilles.

    Directory of Open Access Journals (Sweden)

    Robert W Thacker

    Full Text Available BACKGROUND: Saba Bank Atoll, Netherlands Antilles, is one of the three largest atolls on Earth and provides habitat for an extensive coral reef community. To improve our knowledge of this vast marine resource, a survey of biodiversity at Saba Bank included a multi-disciplinary team that sampled fishes, mollusks, crustaceans, macroalgae, and sponges. METHODOLOGY/PRINCIPAL FINDINGS: A single member of the dive team conducted surveys of sponge biodiversity during eight dives at six locations, at depths ranging from 15 to 30 m. This preliminary assessment documented the presence of 45 species pooled across multiple locations. Rarefaction analysis estimated that only 48 to 84% of species diversity was sampled by this limited effort, clearly indicating a need for additional surveys. An analysis of historical collections from Saba and Saba Bank revealed an additional 36 species, yielding a total of 81 sponge species recorded from this area. CONCLUSIONS/SIGNIFICANCE: This observed species composition is similar to that found on widespread Caribbean reefs, indicating that the sponge fauna of Saba Bank is broadly representative of the Caribbean as a whole. A robust population of the giant barrel sponge, Xestospongia muta, appeared healthy with none of the signs of disease or bleaching reported from other Caribbean reefs; however, more recent reports of anchor chain damage to these sponges suggests that human activities can have dramatic impacts on these communities. Opportunities to protect this extremely large habitat should be pursued, as Saba Bank may serve as a significant reservoir of sponge species diversity.

  13. A preliminary report on the Great Wenchuan Earthquake

    Science.gov (United States)

    Wang, Zifa

    2008-06-01

    The May 12, 2008 Great Wenchuan Earthquake has resulted in more than 68,858 deaths and losses in the hundreds of billions RMB as of May 30, 2008, and these numbers will undoubtedly increase as more information becomes available on the extent of the event. Immediately after the earthquake, the China Earthquake Administration (CEA) responded quickly by sending teams of experts to the affected region, eventually including over 60 staff members from the Institute of Engineering Mechanics (IEM). This paper reports preliminary information that has been gathered in the first 18 days after the event, covering seismicity, search and rescue efforts, observed ground motions, and damage and loss estimates. The extensive field investigation has revealed a number of valuable findings that could be useful in improving research in earthquake engineering in the future. Once again, this earthquake has shown that the vertical component of ground motion is as significant as horizontal ground motions in the near-source area. Finally, note that as more information is gathered, the numbers reported in this paper will need to be adjusted accordingly.

  14. Preliminary study of a dispersed fringe type sensing system

    Institute of Scientific and Technical Information of China (English)

    Yong Zhang; Gen-Rong Liu; Yue-Fei Wang; Ye-Ping Li; Ya-Jun Zhang; Liang Zhang

    2009-01-01

    Telescopes with large aspherical primary mirrors collect more light and are therefore sought after by astronomers. Instead of using a single large one-piece mirror, smaller segments can be assembled into a useable telescopic primary. Because the seg-ments must fit together to create the effect of a single mirror, segmented optics present unique challenges to the fabrication and testing that are absent in monolithic optics. A dispersed fringe sensor (DFS) using a broadband point source is an efficient method for cophasing and is also highly automated and robust. Unlike the widely adopted Shack-Hartmann Wavefront sensor and curvature wavefront sensor with edge sensors for cali-bration of relative pistons, DFS can estimate the piston between segments by only using the spectrum formed by the transmissive grating's dispersion, and therefore can replace the edge sensors, which are difficult to calibrate. We introduce the theory of the DFS and Dispersed Hartmann Sensor (DHS) for further utilization of the coarse phasing method of DFS. According to the theory, we bring out the preliminary system design of the cophas-ing experimental system based on DFS and DHS which is now established in our institute. Finally, a summary is reached.

  15. Preliminary study on mechanics-based rainfall kinetic energy

    Directory of Open Access Journals (Sweden)

    Yuan Jiuqin Ms.

    2014-09-01

    Full Text Available A raindrop impact power observation system was employed to observe the real-time raindrop impact power during a rainfall event and to analyze the corresponding rainfall characteristics. The experiments were conducted at different simulated rainfall intensities. As rainfall intensity increased, the observed impact power increased linearly indicating the power observation system would be satisfactory for characterizing rainfall erosivity. Momentum is the product of mass and velocity (Momentum=MV, which is related to the observed impact power value. Since there is no significant difference between momentum and impact power, observed impact power can represent momentum for different rainfall intensities. The relationship between momentum and the observed impact power provides a convenient way to calculate rainfall kinetic energy. The value of rainfall kinetic energy based on the observed impact power was higher than the classic rainfall kinetic energy. The rainfall impact power based kinetic energy and the classic rainfall kinetic energy showed linear correlation, which indicates that the raindrop impact power observation system can characterize rainfall kinetic energy. The article establishes a preliminary way to calculate rainfall kinetic energy by using the real-time observed momentum, providing a foundation for replacing the traditional methods for estimating kinetic energy of rainstorms.

  16. Wind power in Eritrea, Africa: A preliminary resource assessment

    Energy Technology Data Exchange (ETDEWEB)

    Garbesi, K.; Rosen, K. [San Jose State Univ., CA (United States); Van Buskirk, R. [Dept. of Energy, Eritrea (Ethiopia)

    1997-12-31

    The authors preliminary assessment of Eritrean wind energy potential identified two promising regions: (1) the southeastern Red Sea coast and (2) the mountain passes that channel winds between the coastal lowlands and the interior highlands. The coastal site, near the port city of Aseb, has an exceptionally good resource, with estimated average annual wind speeds at 10-m height above 9 m/s at the airport and 7 m/s in the port. Furthermore, the southern 200 km of coastline has offshore WS{sub aa} > 6 m/s. This area has strong potential for development, having a local 20 MW grid and unmet demand for the fishing industry and development. Although the highland sites contain only marginal wind resources ({approximately} 5 m/s), they warrant further investigation because of their proximity to the capital city, Asmera, which has the largest unmet demand and a larger power grid (40 MW with an additional 80 MW planned) to absorb an intermittent source without storage.

  17. Credit cues and impression management: a preliminary attempt to explain the credit card effect.

    Science.gov (United States)

    McCall, Michael; Trombetta, Jessica; Gipe, Aimee

    2004-08-01

    Prior research had suggested that individuals would estimate higher product values and even tip more in the presence of credit cues. In the absence of a clear theoretical interpretation of this credit card effect we propose that this tendency is an impression management strategy such that credit cue exposure influences perceptions of the self and focuses attention on individual wealth. Thus, in the presence of others, credit cues serve to enhance images of the self. Preliminary data in support of this alternative theoretical perspective are presented.

  18. Stock assessment of Haliporoides triarthrus (Fam. Solenoceridae) off Mozambique: a preliminary analysis

    OpenAIRE

    Torstensen, E.; Pacule, H.

    1992-01-01

    The pink shrimp, Haliporoides triarthrus, is an important species in the deep-water shrimp fishery in Mozambique. Total catches are in the range of 1,500 to 2,700 tons, with the pink shrimp accounting for 70-90%. Estimates of growth parameters and of natural mortality are used for a preliminary assessment of the fishery, based on length-structured virtual population analysis and yield-per-recruit analyses. With an arbitrarily chosen terminal fishing mortality F, the results indicate a situati...

  19. Preliminary results of mental workload and task engagement assessment using electroencephalogram in a space suit.

    Science.gov (United States)

    Rabbi, Ahmed F; Zony, Abongwa N; de Leon, Pablo; Fazel-Rezai, Reza

    2012-01-01

    In this paper, we present preliminary results of subject's mental workload and task engagement assessment in an experimental space suit. We have quantified the mental workload and task engagement based on changes in electroencephalogram (EEG). EEG signals were collected from subjects scalp using a commercial wireless EEG device in two experimental conditions - when subjects did not wear space suit (control condition) and when subjects wore space suit. Brain state changes were estimated and compared with the direct responses for different tasks and different conditions. We found that the spacesuit experiment introduced a greater mental workload where subject's stress levels were higher than control experiment.

  20. Ocean thermal energy conversion (OTEC). Power system development. Preliminary design report, final

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    The preliminary design of the 10 MWe OTEC power module and the 200 kWe test articles is given in detail. System operation and performance; power system cost estimates; 10 MWe heat exchangers; 200 kWe heat exchanger articles; biofouling control;ammonia leak detection, and leak repair; rotating machinery; support subsystem; instrumentation and control; electrical subsystem; installation approach; net energy and resource analysis; and operability, maintainability, and safety are discussed. The conceptual design of the 40 MWe electrical power system includes four or five 10 MWe modules as designed for the 10 MWe pilot plant. (WHK)

  1. 33 CFR 127.315 - Preliminary transfer inspection.

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) WATERFRONT FACILITIES WATERFRONT FACILITIES HANDLING LIQUEFIED NATURAL GAS AND LIQUEFIED HAZARDOUS GAS Waterfront Facilities Handling Liquefied Natural Gas Operations § 127.315 Preliminary...

  2. Assessing antiquity and turnover of terrestrial ecosystems in eastern North America using fossil pollen data: A preliminary study

    Energy Technology Data Exchange (ETDEWEB)

    Liu Yao; Jackson, Stephen T [Department of Botany and Program in Ecology, University of Wyoming (United States); Brewer, Simon [Department of Botany, University of Wyoming (United States); Williams, John W, E-mail: yliu11@uwyo.ed [Department of Geography and Center for Climatic Research, University of Wisconsin (United States)

    2010-03-15

    We explored formal approaches to identifying and interpreting the antiquity and turnover of terrestrial ecosystems in eastern North America using pollen records. Preliminary results of cluster analyses, receiver-operating characteristic (ROC) analyses, and likelihood estimation of ecosystem analog in a simple Bayesian model allow assessment of modern ecosystem antiquities and past ecosystem turnovers. Approaches discussed in this study thus provide a vehicle for further studies.

  3. Repeat testing is essential when estimating chronic kidney disease prevalence and associated cardiovascular risk.

    Science.gov (United States)

    Brook, M O; Bottomley, M J; Mevada, C; Svistunova, A; Bielinska, A-M; James, T; Kalachik, A; Harden, P N

    2012-03-01

    Investigations into chronic kidney disease (CKD) and cardiovascular disease in the CKD population may be misleading as they are often based on a single test of kidney function. To determine whether repeat testing at 3 months to confirm a diagnosis of CKD impacts on the estimated prevalence of CKD and the estimated 10-year general cardiovascular risk of the CKD population. Blood and urine samples from presumed healthy volunteers were analysed for evidence of CKD on recruitment and again 3 months later. Estimated 10-year cardiovascular risk was calculated using criteria determined by the Framingham study. Preliminary study: 512 volunteers were screened for CKD. Of the initial results, 206 indicated CKD or eGFR within one standard deviation of abnormal, and 142 (69%) of these were retested. Validation study: 528 volunteers were recruited and invited to return for repeat testing. A total of 214 (40.5%) participants provided repeat samples. A single test indicating CKD had a positive predictive value of 0.5 (preliminary) and 0.39 (validation) for repeat abnormalities 3 months later. Participants with CKD confirmed on repeat testing had a significant increase in estimated 10-year cardiovascular risk over the population as a whole (preliminary: 16.5 vs. 11.9%, P risk. Repeat testing for CKD after 3 months significantly reduces the estimated prevalence of disease and identifies a population with true CKD and a cardiovascular risk significantly in excess of the general population.

  4. Impaired motor unit control in paretic muscle post stroke assessed using surface electromyography: a preliminary report.

    Science.gov (United States)

    Hu, Xiaogang; Suresh, Aneesha K; Li, Xiaoyan; Rymer, William Zev; Suresh, Nina L

    2012-01-01

    The objective of this preliminary study was to examine the possible contribution of disordered control of motor unit (MU) recruitment and firing patterns in muscle weakness post-stroke. A novel surface EMG (sEMG) recording and decomposition system was used to record sEMG signals and extract single MU activities from the first dorsal interosseous muscle (FDI) of two hemiparetic stroke survivors. To characterize MU reorganization, an estimate of the motor unit action potential (MUAP) amplitude was derived using spike triggered averaging of the sEMG signal. The MUs suitable for further analysis were selected using a set of statistical tests that assessed the variability of the morphological characteristics of the MUAPs. Our preliminary results suggest a disrupted orderly recruitment based on MUAP size, a compressed recruitment range, and reduced firing rates evident in the paretic muscle compared with the contralateral muscle of one subject with moderate impairment. In contrast, the MU organization was largely similar bilaterally for the subject with minor impairment. The preliminary results suggest that MU organizational changes with respect to recruitment and rate modulation can contribute to muscle weakness post-stroke. The contrasting results of the two subjects indicate that the degree of MU reorganization may be associated with the degree of the functional impairment, which reveals the differential diagnostic capability of the sEMG decomposition system.

  5. Automatic trend estimation

    CERN Document Server

    Vamos¸, C˘alin

    2013-01-01

    Our book introduces a method to evaluate the accuracy of trend estimation algorithms under conditions similar to those encountered in real time series processing. This method is based on Monte Carlo experiments with artificial time series numerically generated by an original algorithm. The second part of the book contains several automatic algorithms for trend estimation and time series partitioning. The source codes of the computer programs implementing these original automatic algorithms are given in the appendix and will be freely available on the web. The book contains clear statement of the conditions and the approximations under which the algorithms work, as well as the proper interpretation of their results. We illustrate the functioning of the analyzed algorithms by processing time series from astrophysics, finance, biophysics, and paleoclimatology. The numerical experiment method extensively used in our book is already in common use in computational and statistical physics.

  6. Estimating distances from parallaxes

    Science.gov (United States)

    Astraatmadja, Tri L.; Bailer-Jones, Coryn

    2017-01-01

    In astrometric surveys such as Gaia and LSST, parallaxes will be measured for about a billion stars, but zero distances will be measured. Distances must be inferred from the parallaxes, and the common inference practice is by inverting the parallax. This, however, is only appropriate when there is no noise present. As noise will always be present and most stars in future surveys will have non-negligible fractional parallax uncertainties, we must treat distance estimation as an inference problem. The usage of prior assumptions become unavoidable. In this talk I will present a method on how to infer distances using Bayesian inference. Three minimalists, isotropic priors are used, as well an anisotropic prior derived from the observability of stars in a Milky Way model. The performance of these priors are investigated using a simulated Gaia-like catalogue. Recent results of distance estimation using the parallaxes of 2 million Gaia DR1 stars will also be discussed.

  7. Cost function estimation

    DEFF Research Database (Denmark)

    Andersen, C K; Andersen, K; Kragh-Sørensen, P

    2000-01-01

    Statistical analysis of cost data is often difficult because of highly skewed data resulting from a few patients who incur high costs relative to the majority of patients. When the objective is to predict the cost for an individual patient, the literature suggests that one should choose...... a regression model based on the quality of its predictions. In exploring the econometric issues, the objective of this study was to estimate a cost function in order to estimate the annual health care cost of dementia. Using different models, health care costs were regressed on the degree of dementia, sex, age......, marital status and presence of any co-morbidity other than dementia. Models with a log-transformed dependent variable, where predicted health care costs were re-transformed to the unlogged original scale by multiplying the exponential of the expected response on the log-scale with the average...

  8. Distribution load estimation (DLE)

    Energy Technology Data Exchange (ETDEWEB)

    Seppaelae, A.; Lehtonen, M. [VTT Energy, Espoo (Finland)

    1998-08-01

    The load research has produced customer class load models to convert the customers` annual energy consumption to hourly load values. The reliability of load models applied from a nation-wide sample is limited in any specific network because many local circumstances are different from utility to utility and time to time. Therefore there is a need to find improvements to the load models or, in general, improvements to the load estimates. In Distribution Load Estimation (DLE) the measurements from the network are utilized to improve the customer class load models. The results of DLE will be new load models that better correspond to the loading of the distribution network but are still close to the original load models obtained by load research. The principal data flow of DLE is presented

  9. Robust Wave Resource Estimation

    DEFF Research Database (Denmark)

    Lavelle, John; Kofoed, Jens Peter

    2013-01-01

    An assessment of the wave energy resource at the location of the Danish Wave Energy test Centre (DanWEC) is presented in this paper. The Wave Energy Converter (WEC) test centre is located at Hanstholm in the of North West Denmark. Information about the long term wave statistics of the resource...... is necessary for WEC developers, both to optimise the WEC for the site, and to estimate its average yearly power production using a power matrix. The wave height and wave period sea states parameters are commonly characterized with a bivariate histogram. This paper presents bivariate histograms and kernel...... density estimates of the PDF as a function both of Hm0 and Tp, and Hm0 and T0;2, together with the mean wave power per unit crest length, Pw, as a function of Hm0 and T0;2. The wave elevation parameters, from which the wave parameters are calculated, are filtered to correct or remove spurious data...

  10. Estimation and inferential statistics

    CERN Document Server

    Sahu, Pradip Kumar; Das, Ajit Kumar

    2015-01-01

    This book focuses on the meaning of statistical inference and estimation. Statistical inference is concerned with the problems of estimation of population parameters and testing hypotheses. Primarily aimed at undergraduate and postgraduate students of statistics, the book is also useful to professionals and researchers in statistical, medical, social and other disciplines. It discusses current methodological techniques used in statistics and related interdisciplinary areas. Every concept is supported with relevant research examples to help readers to find the most suitable application. Statistical tools have been presented by using real-life examples, removing the “fear factor” usually associated with this complex subject. The book will help readers to discover diverse perspectives of statistical theory followed by relevant worked-out examples. Keeping in mind the needs of readers, as well as constantly changing scenarios, the material is presented in an easy-to-understand form.

  11. Estimation of radon concentration in dwellings in and around Guwahati

    Science.gov (United States)

    Dey, Gautam Kumar; Das, Projit Kumar

    2012-02-01

    It has been established that radon and its airborne decay products can present serious radiation hazards. A long term exposure to high concentration of radon causes lung cancer. Besides, it is also known that out of the total radiation dose received from natural and man-made sources, 60% of the dose is due to radon and its progeny. Taking this into account, an attempt has been made to estimate radon concentration in dwellings in and around Guwahati using aluminium dosimeter cups with CR-39 plastic detectors. Results of preliminary investigation presented in this paper show that the mean concentration is 21.31 Bq m - 3.

  12. Estimation of radon concentration in dwellings in and around Guwahati

    Indian Academy of Sciences (India)

    Gautam Kumar Dey; Projit Kumar Das

    2012-02-01

    It has been established that radon and its airborne decay products can present serious radiation hazards. A long term exposure to high concentration of radon causes lung cancer. Besides, it is also known that out of the total radiation dose received from natural and man-made sources, 60% of the dose is due to radon and its progeny. Taking this into account, an attempt has been made to estimate radon concentration in dwellings in and around Guwahati using aluminium dosimeter cups with CR-39 plastic detectors. Results of preliminary investigation presented in this paper show that the mean concentration is 21.31 Bq m−3.

  13. A method for density estimation based on expectation identities

    Science.gov (United States)

    Peralta, Joaquín; Loyola, Claudia; Loguercio, Humberto; Davis, Sergio

    2017-06-01

    We present a simple and direct method for non-parametric estimation of a one-dimensional probability density, based on the application of the recent conjugate variables theorem. The method expands the logarithm of the probability density ln P(x|I) in terms of a complete basis and numerically solves for the coefficients of the expansion using a linear system of equations. No Monte Carlo sampling is needed. We present preliminary results that show the practical usefulness of the method for modeling statistical data.

  14. Optimal Centroid Position Estimation

    Energy Technology Data Exchange (ETDEWEB)

    Candy, J V; McClay, W A; Awwal, A S; Ferguson, S W

    2004-07-23

    The alignment of high energy laser beams for potential fusion experiments demand high precision and accuracy by the underlying positioning algorithms. This paper discusses the feasibility of employing online optimal position estimators in the form of model-based processors to achieve the desired results. Here we discuss the modeling, development, implementation and processing of model-based processors applied to both simulated and actual beam line data.

  15. Estimating Risk Parameters

    OpenAIRE

    Aswath Damodaran

    1999-01-01

    Over the last three decades, the capital asset pricing model has occupied a central and often controversial place in most corporate finance analysts’ tool chests. The model requires three inputs to compute expected returns – a riskfree rate, a beta for an asset and an expected risk premium for the market portfolio (over and above the riskfree rate). Betas are estimated, by most practitioners, by regressing returns on an asset against a stock index, with the slope of the regression being the b...

  16. Estimating Corporate Yield Curves

    OpenAIRE

    Antionio Diaz; Frank Skinner

    2001-01-01

    This paper represents the first study of retail deposit spreads of UK financial institutions using stochastic interest rate modelling and the market comparable approach. By replicating quoted fixed deposit rates using the Black Derman and Toy (1990) stochastic interest rate model, we find that the spread between fixed and variable rates of interest can be modeled (and priced) using an interest rate swap analogy. We also find that we can estimate an individual bank deposit yield curve as a spr...

  17. Qualitative Robustness in Estimation

    Directory of Open Access Journals (Sweden)

    Mohammed Nasser

    2012-07-01

    Full Text Available Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Times New Roman","serif";} Qualitative robustness, influence function, and breakdown point are three main concepts to judge an estimator from the viewpoint of robust estimation. It is important as well as interesting to study relation among them. This article attempts to present the concept of qualitative robustness as forwarded by first proponents and its later development. It illustrates intricacies of qualitative robustness and its relation with consistency, and also tries to remove commonly believed misunderstandings about relation between influence function and qualitative robustness citing some examples from literature and providing a new counter-example. At the end it places a useful finite and a simulated version of   qualitative robustness index (QRI. In order to assess the performance of the proposed measures, we have compared fifteen estimators of correlation coefficient using simulated as well as real data sets.

  18. Estimating distances from parallaxes

    CERN Document Server

    Bailer-Jones, C A L

    2015-01-01

    Astrometric surveys such as Gaia and LSST will measure parallaxes for hundreds of millions of stars. Yet they will not measure a single distance. Rather, a distance must be estimated from a parallax. In this didactic article, I show that doing this is not trivial once the fractional parallax error is larger than about 20%, which will be the case for about 80% of stars in the Gaia catalogue. Estimating distances is an inference problem in which the use of prior assumptions is unavoidable. I investigate the properties and performance of various priors and examine their implications. A supposed uninformative uniform prior in distance is shown to give very poor distance estimates (large bias and variance). Any prior with a sharp cut-off at some distance has similar problems. The choice of prior depends on the information one has available - and is willing to use - concerning, for example, the survey and the Galaxy. I demonstrate that a simple prior which decreases asymptotically to zero at infinite distance has g...

  19. Preliminary Results of Field Emission Cathode Tests

    Science.gov (United States)

    Sovey, James S.; Kovaleski, Scott D.

    2001-01-01

    Preliminary screening tests of field emission cathodes such as chemical vapor deposited (CVD) diamond, textured pyrolytic graphite, and textured copper were conducted at background pressures typical of electric thruster test facilities to assess cathode performance and stability. Very low power electric thrusters which provide tens to hundreds micronewtons of thrust may need field emission neutralizers that have a capability of tens to hundreds of microamperes. From current voltage characteristics, it was found that the CVD diamond and textured metals cathodes clearly satisfied the Fowler-Nordheim emission relation. The CVD diamond and a textured copper cathode had average current densities of 270 and 380 mA/sq cm, respectively, at the beginning-of-life. After a few hours of operation the cathode emission currents degraded by 40 to 75% at background pressures in the 10(exp -5) Pa to 10(exp -4) Pa range. The textured pyrolytic graphite had a modest current density at beginning-of-life of 84 mA/sq cm, but this cathode was the most stable of all. Extended testing of the most promising cathodes is warranted to determine if current degradation is a burn-in effect or whether it is a long-term degradation process. Preliminary experiments with ferroelectric emission cathodes, which are ceramics with spontaneous electric polarization, were conducted. Peak current densities of 30 to 120 mA/sq cm were obtained for pulse durations of about 500 ns in the 10(exp -4) Pa pressure range.

  20. Defining resilience: A preliminary integrative literature review

    Science.gov (United States)

    Wilt, Bonnie; Long, Suzanna K.; Shoberg, Thomas G.

    2016-01-01

    The term “resilience” is ubiquitous in technical literature; it appears in numerous forms, such as resilience, resiliency, or resilient, and each use may have a different definition depending on the interpretation of the writer. This creates difficulties in understanding what is meant by ‘resilience’ in any given use case, especially in discussions of interdisciplinary research. To better understand this problem, this research constructs a preliminary integrative literature review to map different definitions, applications and calculation methods of resilience invoked within critical infrastructure applications. The preliminary review uses a State-of-the-Art Matrix (SAM) analysis to characterize differences in definition across disciplines and between regions. Qualifying the various usages of resilience will produce a greater precision in the literature and a deeper insight into types of data required for its evaluation, particularly with respect to critical infrastructure calculations and how such data may be analyzed. Results from this SAM analysis will create a framework of key concepts as part of the most common applications for “resilient critical infrastructure” modeling.