WorldWideScience

Sample records for possessed additional cas30

  1. The protection of possession

    Directory of Open Access Journals (Sweden)

    Popov Danica

    2011-01-01

    Full Text Available Protection in disputes for the protection of possession can be attained through the following actions a for dispossession (interdictum recuperande possessionis and b with an action for the disturbance of possession (interdictum retinendae possessionis. The general feature of these disputes is that there is only discussion on the facts and not a legal matters. Subject matter jurisdiction for the resolution of such disputes belongs to the court of general jurisdiction, while the dispute itself is a litigation. The special rule of proceedings of action for disturbance are: provisionality of the protection of possession; urgency in proceedings; initiation of the proceedings; limiting of objection; prescribing temporary measures; rendering a ruling in the form of order; appeals which may be filed within a short deadline and which does not have suspensive effect (do not delay the execution of the order; revision is not allowed etc.

  2. Individual ball possession in soccer.

    Directory of Open Access Journals (Sweden)

    Daniel Link

    Full Text Available This paper describes models for detecting individual and team ball possession in soccer based on position data. The types of ball possession are classified as Individual Ball Possession (IBC, Individual Ball Action (IBA, Individual Ball Control (IBC, Team Ball Possession (TBP, Team Ball Control (TBC und Team Playmaking (TPM according to different starting points and endpoints and the type of ball control involved. The machine learning approach used is able to determine how long the ball spends in the sphere of influence of a player based on the distance between the players and the ball together with their direction of motion, speed and the acceleration of the ball. The degree of ball control exhibited during this phase is classified based on the spatio-temporal configuration of the player controlling the ball, the ball itself and opposing players using a Bayesian network. The evaluation and application of this approach uses data from 60 matches in the German Bundesliga season of 2013/14, including 69,667 IBA intervals. The identification rate was F = .88 for IBA and F = .83 for IBP, and the classification rate for IBC was κ = .67. Match analysis showed the following mean values per match: TBP 56:04 ± 5:12 min, TPM 50:01 ± 7:05 min and TBC 17:49 ± 8:13 min. There were 836 ± 424 IBC intervals per match and their number was significantly reduced by -5.1% from the 1st to 2nd half. The analysis of ball possession at the player level indicates shortest accumulated IBC times for the central forwards (0:49 ± 0:43 min and the longest for goalkeepers (1:38 ± 0:58 min, central defenders (1:38 ± 1:09 min and central midfielders (1:27 ± 1:08 min. The results could improve performance analysis in soccer, help to detect match events automatically, and allow discernment of higher value tactical structures, which is based on individual ball possession.

  3. An additional trigeminal system in certain snakes possessing infrared receptors

    NARCIS (Netherlands)

    Molenaar, Gerard J.

    1974-01-01

    This communication describes a nucleus and tract of the trigeminal system whose existence is not mentioned in any account of brain stem architecture known to the present author. The structures were first recognised in the brain stem of a giant snake (Python reticulatus) and later were also found

  4. The qualified possession turn into ownership

    Directory of Open Access Journals (Sweden)

    Popov Danica

    2011-01-01

    Full Text Available Possession is prima facie evidence of ownership. Possession is ninetents of the law, means that possession is good against all other, except the true owner. The possession ripens into ownership if it is qualified and by effluxion of time. In Serbian law there are two kinds of adverse possession ripens into ownership. The first one is named ordinary and second one extraordinary adverse possession. Ordinary possession need to be legal, conscientious and genuine. Extraordinary possession is only conscientious, but in a wide sense. Adverse possession destroys the title of the owner and vests it in possessor. An occupation of land inconsistent with the right of the true owner: the possession of those against whom a right action has accured to the true owner. It is actual possession in the absence of possession by the rightful owner and without lawful title. If the adverse possession continues, the effect at the expiration of the prescribed period is that not only the remedy but the title of former owner is extinguished. The person in adverse possession gains a new possessory title which cannot, normally exceed in extent of duration the interest of the former owner.

  5. 50 CFR 648.164 - Possession restrictions.

    Science.gov (United States)

    2010-10-01

    ... Atlantic Bluefish Fishery § 648.164 Possession restrictions. (a) No person shall possess more than 15 bluefish in, or harvested from, the EEZ unless that person is the owner or operator of a fishing vessel issued a bluefish commercial permit or is issued a bluefish dealer permit. Persons aboard a vessel that...

  6. POSSESSION, REVIEW FROM CULTURAL AND PSYCHIATRY

    Directory of Open Access Journals (Sweden)

    Ni Ketut Sri Diniari

    2013-03-01

    Full Text Available Possession is a culture related syndrome, commonly found in Indonesia including Bali. We can see this event in religion and cultural ceremony and at other times at school, home, and in society. This syndrome consist of temporary loss of self identification and environment awareness; in several events a person acts as if he/she was controlled by other being, magic force, spirit or ‘other forces’. There are still several different opinions about trance-possession, whether it is related to certain culture or is a part of mental disorder. DSM-IV-TR and PPDGJ-III defined trance-possession as mental disorder (dissociative for involuntary possession, if it is not a common activity, and if it is not a part of religion or cultural event. (MEDICINA 2012;43:37-40.

  7. Subself theory and reincarnation/possession.

    Science.gov (United States)

    Lester, David

    2004-12-01

    A subself model of the mind is used to account for multiple personality, possession, the spirit controls of mediums, reincarnation, and the auditory hallucinations of schizophrenics, with suggestions for empirical research.

  8. The Impact of Banning Juvenile Gun Possession.

    OpenAIRE

    Marvell, Thomas B

    2001-01-01

    A 1994 federal law bans possession of handguns by persons under 18 years of age. Also in 1994, 11 states passed their own juvenile gun possession bans. Eighteen states had previously passed bans, 15 of them between 1975 and 1993. These laws were intended to reduce homicides, but arguments can be made that they have no effect on or that they even increase the homicide rate. This paper estimates the laws' impacts on various crime measures, primarily juvenile gun homicide victimizations and suic...

  9. Possession divestment by sales in later life.

    Science.gov (United States)

    Ekerdt, David J; Addington, Aislinn

    2015-08-01

    Residential relocation in later life is almost always a downsizing, with many possessions to be divested in a short period of time. This article examines older movers' capacities for selling things, and ways that selling attenuates people's ties to those things, thus accomplishing the human dis-possession of the material convoy. In qualitative interviews in 79 households in the Midwestern United States, older adults reported their experience with possession sales associated with residential relocation. Among this group, three-quarters of the households downsized by selling some belongings. Informal sales seemed the least fraught of all strategies, estate sales had mixed reviews, and garage sales were recalled as laborious. Sellers' efforts were eased by social relations and social networks as helpers and buyers came forward. As selling proceeded, sentiment about possessions waned as their materiality and economic value came to the fore, easing their detachment from the household. Possession selling is challenging because older adults are limited in the knowledge, skills, and efforts that they can apply to the recommodification of their belongings. Selling can nonetheless be encouraged as a divestment strategy as long as the frustrations and drawbacks are transparent, and the goal of ridding is kept in view. Copyright © 2015 Elsevier Inc. All rights reserved.

  10. The Failed Image and the Possessed

    DEFF Research Database (Denmark)

    Suhr, Christian

    2015-01-01

    This article asks if the recurrent queries regarding the value of images in visual anthropology could find new answers by exploring responses to visual media in neo-orthodox Islam. It proposes that the visual display of the photographic image shares a curious resemblance to the bodies of people...... possessed by invisible spirits called jinn. The image as a failed example or model of reality works like the possessed body as an amplifier of invisibility pointing towards that which cannot be seen, depicted visually, or represented in writing. This suggests a negative epistemology in which images obtain...

  11. Digital possessions after a romantic break up

    NARCIS (Netherlands)

    Herron, Daniel; Moncur, Wendy; van den Hoven, Elise

    2016-01-01

    With technology becoming more pervasive in everyday life, it is common for individuals to use digital media to support the enactment and maintenance of romantic relationships. Partners in a relationship may create digital possessions frequently. However, after a relationship ends, individuals

  12. POSSESSION VERSUS POSITION: STRATEGIC EVALUATION IN AFL

    Directory of Open Access Journals (Sweden)

    Darren M. O'Shaughnessy

    2006-12-01

    Full Text Available In sports like Australian Rules football and soccer, teams must battle to achieve possession of the ball in sufficient space to make optimal use of it. Ultimately the teams need to score, and to do that the ball must be brought into the area in front of goal - the place where the defence usually concentrates on shutting down space and opportunity time. Coaches would like to quantify the trade-offs between contested play in good positions and uncontested play in less promising positions, in order to inform their decision-making about where to put their players, and when to gamble on sending the ball to a contest rather than simply maintain possession. To evaluate football strategies, Champion Data has collected the on-ground locations of all 350,000 possessions and stoppages in the past two seasons of AFL (2004, 2005. By following each chain of play through to the next score, we can now reliably estimate the scoreboard "equity" of possessing the ball at any location, and measure the effect of having sufficient time to dispose of it effectively. As expected, winning the ball under physical pressure (through a "hard ball get" is far more difficult to convert into a score than winning it via a mark. We also analyse some equity gradients to show how getting the ball 20 metres closer to goal is much more important in certain areas of the ground than in others. We conclude by looking at the choices faced by players in possession wanting to maximise their likelihood of success

  13. Taking Possession: Rituals, Space and Authority

    Directory of Open Access Journals (Sweden)

    Jennifer Mara DeSilva

    2016-12-01

    Full Text Available In early modern Europe authority over communities, both people and spaces, was visualized through ritual gestures and processions. Communities gathered to witness ceremonial entries that drew on accepted forms of gestures and speech identifying individuals and articulating their place in the urban power relationship. Ceremonial entries by rulers, ambassadors, bishops, and other office-holders drew on ritual acts projecting messages of possession in order to establish reputations of prestige and authority. This introductory essay draws on cultural anthropology and recent historiography to build a framework for understanding rituals of possession that went beyond the tradition triumphal entry to incorporate substitutes, new modes of prestigious display, and attend to conflicts. By “taking possession” of communities, offices, and spaces using accepted ritual forms, early moderns initiated conversations about authority and power that were far more flexible in their scope, practice, and participants than expected.

  14. Study on analysis of waste edible oil with deterioration and removal of acid value, carbonyl value, and free fatty acid by a food additive (calcium silicate).

    Science.gov (United States)

    Ogata, Fumihiko; Tanaka, Yuko; Tominaga, Hisato; Kangawa, Moe; Inoue, Kenji; Ueda, Ayaka; Iwata, Yuka; Kawasaki, Naohito

    2013-01-01

    This study investigated the regeneration of waste edible oil using a food additive (calcium silicate, CAS). Waste edible oil was prepared by combined heat and aeration treatment. Moreover, the deterioration of edible oil by combined heat and aeration treatment was greater than that by heat treatment alone. The acid value (AV) and carbonyl value (CV) increased with increasing deterioration; conversely, the tocopherol concentration decreased with increasing deterioration. The specific surface area, pore volume, and mean pore diameter of the 3 CAS formulations used (CAS30, CAS60, and CAS90) were evaluated, and scanning electron microscopic images were taken. The specific surface area increased in the order of CAS30 (115.54 m(2)/g) edible oil was possible with CAS treatment. The AV reduced by 15.2%, 10.8%, and 23.1% by CAS30, CAS60, and CAS90 treatment, respectively, and the CV was reduced by 35.6%, 29.8%, and 31.3% by these 3 treatments, respectively. Moreover, the concentrations of tocopherol and free fatty acids did not change with CAS treatment. The characteristics of CAS were not related to the degree of change of AV and CV. However, the adsorption mechanism of polar and non-polar compounds generated in waste edible oil by CAS was related with the presence of silica gel molecules in CAS. The findings indicated that CAS was useful for the regeneration of waste edible oil.

  15. Male homosexuality and spirit possession in Brazil.

    Science.gov (United States)

    Fry, P

    1985-01-01

    This paper examines the relationship between male homosexuality and the Afro-Brazilian possession cults in Belém do Parà. After a discussion of the literature follows a description of the cults' beliefs, rites and social organization. Male sex roles are then discussed and the two categories, bicha and man, analyzed. It is noted that there is no term which is equivalent to the western category of "homosexual" in this taxonomic system. After putting forward folk explanations for the presence of many bichas in the cults, an analysis is put forward of the social rewards available to bichas within these cults, and the structural relationship between homosexuality and these regions in terms of their congruent marginality vis-à-vis "normal society."

  16. Predicative possession in Medieval Slavic Bible translations Predicative Possession in Early Biblical Slavic

    Directory of Open Access Journals (Sweden)

    Julia McAnallen

    2011-08-01

    Full Text Available Late Proto-Slavic (LPS had an inventory of three constructions for expressing predicative possession. Using the earliest Slavic Bible translations from Old Church Slavic (OCS, and to a lesser degree Old Czech, a number of conclusions can be drawn about the status of predicative possession for LPS. The verb iměti ‘have’ was the most frequent and least syntactically and semantically restricted predicative possessive construction (PPC. Existential PPCs with a dative possessor appear primarily with kinship relations, abstract possessums, and in a number of other fixed construction types; existential PPCs with the possessor in an u + genitive prepositional phrase primarily appear with concrete and countable possessums. Both existential PPCs call for an animate, most often pronominal, possessor. The u + genitive was the rarest type of PPC in LPS, though it had undoubtedly grammaticalized as a PPC.

  17. 50 CFR 20.38 - Possession of live birds.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Possession of live birds. 20.38 Section 20... WILDLIFE AND PLANTS (CONTINUED) MIGRATORY BIRD HUNTING Possession § 20.38 Possession of live birds. Every migratory game bird wounded by hunting and reduced to possession by the hunter shall be immediately killed...

  18. 22 CFR 72.14 - Nominal possession; property not normally taken into physical possession.

    Science.gov (United States)

    2010-04-01

    ... possession. (a) When a consular officer take articles of a decedent's personal property from a foreign... Department discharging the consular officer of any responsibility for the articles transferred. (b) A... effects; (2) Motor vehicles, airplanes or watercraft; (3) Toiletries, such as toothpaste or razors; (4...

  19. Possession States: Approaches to Clinical Evaluation and Classification

    Directory of Open Access Journals (Sweden)

    S. McCormick

    1992-01-01

    Full Text Available The fields of anthropology and sociology have produced a large quantity of literature on possession states, physicians however rarely report on such phenomena. As a result clinical description of possession states has suffered, even though these states may be more common and less deviant than supposed. Both ICD-10 and DSM-IV may include specific criteria for possession disorders. The authors briefly review Western notions about possession and kindred states and present guidelines for evaluation and classification.

  20. Adducin family proteins possess different nuclear export potentials.

    Science.gov (United States)

    Liu, Chia-Mei; Hsu, Wen-Hsin; Lin, Wan-Yi; Chen, Hong-Chen

    2017-05-10

    The adducin (ADD) family proteins, namely ADD1, ADD2, and ADD3, are actin-binding proteins that play important roles in the stabilization of membrane cytoskeleton and cell-cell junctions. All the ADD proteins contain a highly conserved bipartite nuclear localization signal (NLS) at the carboxyl termini, but only ADD1 can localize to the nucleus. The reason for this discrepancy is not clear. To avoid the potential effect of cell-cell junctions on the distribution of ADD proteins, HA epitope-tagged ADD proteins and mutants were transiently expressed in NIH3T3 fibroblasts and their distribution in the cytoplasm and nucleus was examined by immunofluorescence staining. Several nuclear proteins were identified to interact with ADD1 by mass spectrometry, which were further verified by co-immunoprecipitation. In this study, we found that ADD1 was detectable both in the cytoplasm and nucleus, whereas ADD2 and ADD3 were detected only in the cytoplasm. However, ADD2 and ADD3 were partially (~40%) sequestered in the nucleus by leptomycin B, a CRM1/exportin1 inhibitor. Upon the removal of leptomycin B, ADD2 and ADD3 re-distributed to the cytoplasm. These results indicate that ADD2 and ADD3 possess functional NLS and are quickly transported to the cytoplasm upon entering the nucleus. Indeed, we found that ADD2 and ADD3 possess much higher potential to counteract the activity of the NLS derived from Simian virus 40 large T-antigen than ADD1. All the ADD proteins appear to contain multiple nuclear export signals mainly in their head and neck domains. However, except for the leucine-rich motif ( 377 FEALMRMLDWLGYRT 391 ) in the neck domain of ADD1, no other classic nuclear export signal was identified in the ADD proteins. In addition, the nuclear retention of ADD1 facilitates its interaction with RNA polymerase II and zinc-finger protein 331. Our results suggest that ADD2 and ADD3 possess functional NLS and shuttle between the cytoplasm and nucleus. The discrepancy in the

  1. Possession experiences in dissociative identity disorder: a preliminary study.

    Science.gov (United States)

    Ross, Colin A

    2011-01-01

    Dissociative trance disorder, which includes possession experiences, was introduced as a provisional diagnosis requiring further study in the Diagnostic and Statistical Manual of Mental Disorders (4th ed.). Consideration is now being given to including possession experiences within dissociative identity disorder (DID) in the Diagnostic and Statistical Manual of Mental Disorders (5th ed.), which is due to be published in 2013. In order to provide empirical data relevant to the relationship between DID and possession states, I analyzed data on the prevalence of trance, possession states, sleepwalking, and paranormal experiences in 3 large samples: patients with DID from North America; psychiatric outpatients from Shanghai, China; and a general population sample from Winnipeg, Canada. Trance, sleepwalking, paranormal, and possession experiences were much more common in the DID patients than in the 2 comparison samples. The study is preliminary and exploratory in nature because the samples were not matched in any way.

  2. Feature interpretability and the positions of 2nd person possessives in Brazilian Portuguese

    Directory of Open Access Journals (Sweden)

    Bruna Karla Pereira

    2016-12-01

    Full Text Available Interpretability and valuation of φ-features (Chomsky, 2001; Pesetsky and Torrego, 2007 have played a central role in the investigation of language universals. With regard to that, in standard Brazilian Portuguese (BP, as well as in other Romance languages, possessives have uninterpretable number features, which are valued via nominal agreement. However, dialects of BP, especially the one spoken in Minas Gerais, have shown that 2nd person possessives, in postnominal position, do not have number agreement with the noun. In order to account for these facts, I will argue that, in this grammar, number features on 2nd person possessives are reanalyzed as being: (i associated with the person (rather than the noun and (ii interpretable. From the first postulation, ‘seu’ is expected to be the possessive for 2nd person singular, and ‘seus’ for 2nd person plural. From the second postulation, no number concord is expected to be triggered on the possessive. In addition, based on Danon (2011 and Norris (2014, I will argue that cardinals divide BP DPs into two domains in that phrases located above NumP are marked with the plural morpheme, while phrases below it are unmarked. In this sense, because prenominal possessives precede cardinals (NumP, they must be marked with the plural morpheme for nominal agreement; whereas postnominal possessives, which follow NumP, must be unmarked. Free from the plural marking associated with nominal agreement, postnominal 2nd person possessives favor the reanalysis of the morpheme ‘-s’ as indicating the number associated with person features.

  3. 20 CFR 404.1093 - Possession of the United States.

    Science.gov (United States)

    2010-04-01

    ... DISABILITY INSURANCE (1950- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment... figuring your net earnings from self-employment, the term possession of the United States shall be deemed...

  4. Mental illness complicated by the santeria belief in spirit possession.

    Science.gov (United States)

    Alonso, L; Jeffrey, W D

    1988-11-01

    Santeria, a religious system that blends African and Catholic beliefs, is practiced by many Cuban Americans. One aspect of this system is the belief in spirit possession. Basic santeria beliefs and rituals, including the fiesta santera (a gathering at which some participants may become possessed), are briefly described, and four cases in which the patients' belief in possession played a role in their mental illness are presented. The belief in possession can complicate the diagnosis and treatment of mental illness, but it should not be considered a culture-bound syndrome. Rather, it may be a nonspecific symptom of a variety of mental illnesses and should be evaluated in the context of the patient's overall belief system and ability to carry out usual activities.

  5. Constitutional Law: Right of Privacy--Possession of Marijuana

    Science.gov (United States)

    Rohrer, David E.

    1976-01-01

    The Alaska Supreme Court in Ravin v. State accepted the defendant's contention that the prohibition of possession of marihuana infringed on his constitutional right to privacy. The significance of the case is discussed. (LBH)

  6. The epistemological significance of possession entering the DSM.

    Science.gov (United States)

    Stephenson, Craig

    2015-09-01

    The discourse of the American Psychiatric Association's DSM reflects the inherently dialogic or contradictory nature of its stated mandate to demonstrate both 'nosological completeness' and cultural 'inclusiveness'. Psychiatry employs the dialogic discourse of the DSM in a one-sided, positivistic manner by identifying what it considers universal mental disease entities stripped of their cultural context. In 1992 the editors of the Diagnostic and Statistical Manual of Mental Disorders proposed to introduce possession into their revisions. A survey of the discussions about introducing 'possession' as a dissociative disorder to be listed in the DSM-IV indicates a missed epistemological break. Subsequently the editors of the DSM-5 politically 'recuperated' possession into its official discourse, without acknowledging the anarchic challenges that possession presents to psychiatry as a cultural practice. © The Author(s) 2015.

  7. Criminalization of 'Possession of Unexplained Property' and the ...

    African Journals Online (AJOL)

    Worku_Y

    government operating costs, increases government spending for wages and ... revenues by plundering revenue generating agencies such as tax collection, ..... a) the assets under the ownership or possession of himself and his family; and.

  8. Gun possession among American youth: a discovery-based approach to understand gun violence.

    Science.gov (United States)

    Ruggles, Kelly V; Rajan, Sonali

    2014-01-01

    To apply discovery-based computational methods to nationally representative data from the Centers for Disease Control and Preventions' Youth Risk Behavior Surveillance System to better understand and visualize the behavioral factors associated with gun possession among adolescent youth. Our study uncovered the multidimensional nature of gun possession across nearly five million unique data points over a ten year period (2001-2011). Specifically, we automated odds ratio calculations for 55 risk behaviors to assemble a comprehensive table of associations for every behavior combination. Downstream analyses included the hierarchical clustering of risk behaviors based on their association "fingerprint" to 1) visualize and assess which behaviors frequently co-occur and 2) evaluate which risk behaviors are consistently found to be associated with gun possession. From these analyses, we identified more than 40 behavioral factors, including heroin use, using snuff on school property, having been injured in a fight, and having been a victim of sexual violence, that have and continue to be strongly associated with gun possession. Additionally, we identified six behavioral clusters based on association similarities: 1) physical activity and nutrition; 2) disordered eating, suicide and sexual violence; 3) weapon carrying and physical safety; 4) alcohol, marijuana and cigarette use; 5) drug use on school property and 6) overall drug use. Use of computational methodologies identified multiple risk behaviors, beyond more commonly discussed indicators of poor mental health, that are associated with gun possession among youth. Implications for prevention efforts and future interdisciplinary work applying computational methods to behavioral science data are described.

  9. Possessive Pronouns in European Portuguese and Old French

    Directory of Open Access Journals (Sweden)

    Matilde Miguel

    2002-12-01

    Full Text Available The aim of this paper is to bring European Portuguese (EP data into light, showing that, in spite of the lack of morphological evidence, the syntactic behaviour of possessives, across EP dialects, shows evidences for a tripartite possessive system (Cardinaletti, 1998; Cardinaletti & Starke, 1999. It will be argued that the syntactic position of possessives parallels the positions assumed for EP sentential subjects in non interrogative contexts: [Spec, AgrsP], [Spec, TP] and [Spec, VP]. As a matter of fact, depending on their syntactic properties and assuming, as null hypothesis, that the nominal head moves to Numb'º', possessives may occur in [Spec, AgrsNP], [Spec, NumbP] and [Spec, NP]. Furthermore, would it be so, this dialectal variation would be useful in order to understand the changes that have occurred in other romance languages in previous stages. It might be the case that the loss of weak possessive forms (“mien” in French parallels, among other things, the lack of sentential subjects in [Spec, TP].

  10. The goalkeeper influence on ball possession effectiveness in futsal

    Directory of Open Access Journals (Sweden)

    Vicente-Vila Pedro

    2016-06-01

    Full Text Available The aim of this study was to identify which variables were the best predictors of success in futsal ball possession when controlling for space and task related indicators, situational variables and the participation of the goalkeeper as a regular field player or not (5 vs. 4 or 4 vs. 4. The sample consisted of 326 situations of ball possession corresponding to 31 matches played by a team from the Spanish Futsal League during the 2010–2011, 2011–2012 and 2012–2013 seasons. Multidimensional qualitative data obtained from 10 ordered categorical variables were used. Data were analysed using chi-square analysis and multiple logistic regression analysis. Overall, the highest ball possession effectiveness was achieved when the goalkeeper participated as a regular field player (p<0.01, the duration of the ball possession was less than 10 s (p<0.01, the ball possession ended in the penalty area (p<0.01 and the defensive pressure was low (p<0.01. The information obtained on the relative effectiveness of offensive playing tactics can be used to improve team’s goal-scoring and goal preventing abilities.

  11. Themes in Spirit Possession in Ugandan Christianity | James ...

    African Journals Online (AJOL)

    . This paper discerns a number of common themes that run through many of these experiences. In particular, sex as a motif for deviance and evil is noted as a common feature of many of the possession stories and all contact with spirits is seen ...

  12. Gun Possession among Massachusetts Batterer Intervention Program Enrollees

    Science.gov (United States)

    Rothman, Emily F.; Johnson, Renee M.; Hemenway, David

    2006-01-01

    Batterers with access to firearms present a serious lethal threat to their partners. The purpose of this exploratory study is to estimate the prevalence of and risk markers for gun possession among Massachusetts men enrolled in batterer intervention programs. The authors found that 1.8% of the men reported having a gun in or around their home.…

  13. Licenses for possessing and applying radioactive sources, materials, etc

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Commercial and governmental institutions have been licensed by Dutch authorities to possess and apply radioactive sources, materials, etc. A summary is given and the list is subdivided into a number of sections such as radioactive sources, radioactive materials, X-ray equipment and technetium-generators

  14. 46 CFR 308.504 - Definition of territories and possessions.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Definition of territories and possessions. 308.504 Section 308.504 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance I-Introduction § 308.504 Definition of territories and...

  15. Dynamics of the spirit possession phenomenon in Eastern Tanzania

    Directory of Open Access Journals (Sweden)

    Marja-Liisa Swantz

    1976-01-01

    Full Text Available The discussion on the spirit possession phenomenon is related in this study to the more general question of the role of religious institutions as part in the development process of a people living in a limited geographical area of a wider national society. It is assumed that religion, like culture in general, has its specific institutional forms as result of the historical development of a society, but at the same time religion is a force shaping that history. People's cultural resources influence their social and economic development and form a potential creative element in it'. Some of the questions to be asked are: "How are specific religious practices related to the dynamics of change in the societies in question? What is the social and religious context in which the spirit possession phenomenon occurs in them? What social and economic relations get their expression in them? To what extent is spirit possession in this case a means of exerting values and creatively overcoming a crisis or conflict which the changing social and economic relations impose on the people? The established spirit possession cults are here seen as the institutional forms of religious experience. At the same time it becomes evident that there is institutionalization in process as well as deinstitutionalization of spirit possession where it occurs outside established institutional forms. Institution is taken as a socially shared form of behaviour the significance of which is commonly recognized by those who share it. By the term spirit possession cult is meant a ritual form of spirit possession of a group which is loosely organized and without strict membership. The context of the study is four ethnic groups in Eastern Tanzania, near the coast of the Indian Ocean. The general theme of the project is The Role of Culture in the Restructuring of Tanzanian Rural Areas. The restructuring refers to a villagisation programme carried out in the whole country. People are being

  16. Descending with Angels: Jinn Possession, Islamic Exorcism, and Psychiatry

    DEFF Research Database (Denmark)

    Suhr, Christian

    What is it like to be a Muslim possessed by a jinn spirit? How do you find refuge from madness and evil in a place like Denmark? In this book I explore some of the ways in which Muslims in the West have sought to protect themselves. Over several years I followed Muslim patients being treated.......” In the book I analyze how these broader social and political issues are paralleled in the invisible dynamics of jinn possession and psychosis, proposing new theoretical perspectives on religious and psychiatric healing as ritual practices for dealing with the invisible in human life....... hypervisible in public discourse through intensive state monitoring, surveillance, and media coverage. Yet their religion of Islam remains poorly understood and is frequently identified by politicians, commentators, and even healthcare specialists as the underlying invisible cause of “integration problems...

  17. The Regulation of the Possession of Weapons at Gatherings

    Directory of Open Access Journals (Sweden)

    Pieter du Toit

    2013-12-01

    Full Text Available The Dangerous Weapons Act 15 of 2013 provides for certain prohibitions and restrictions in respect of the possession of a dangerous weapon and it repeals the Dangerous Weapons Act 71 of 1968 as well as the different Dangerous Weapons Acts in operation in the erstwhile TBVC States. The Act also amends the Regulation of Gatherings Act 205 of 1993 to prohibit the possession of any dangerous weapon at a gathering or demonstration. The Dangerous Weapons Act provides for a uniform system of law governing the use of dangerous weapons for the whole of South Africa and it furthermore no longer places the onus on the individual charged with the offence of the possession of a dangerous weapon to show that he or she did not have any intention of using the firearm for an unlawful purpose. The Act also defines the meaning of a dangerous weapon. According to our court’s interpretation of the Dangerous Weapons Act 71 of 1968 a dangerous weapon was regarded as an object used or intended to be used as a weapon even if it had not been designed for use as a weapon. The Act, however, requires the object to be capable of causing death or inflicting serious bodily harm if it were used for an unlawful purpose. The possession of a dangerous weapon, in circumstances which may raise a reasonable suspicion that the person intends to use it for an unlawful purpose, attracts criminal liability. The Act also provides a useful set of guidelines to assist courts to determine if a person charged with the offence of the possession of a dangerous weapon had indeed intended to use the weapon for an unlawful purpose. It seems, however, that the Act prohibits the possession of a dangerous weapon at gatherings, even if the person carrying the weapon does not intend to use it for an unlawful purpose. The state will, however, have to prove that the accused had the necessary control over the object and the intention to exercise such control, as well as that the object is capable of

  18. Emotional regulation, attachment to possessions and hoarding symptoms.

    Science.gov (United States)

    Phung, Philip J; Moulding, Richard; Taylor, Jasmine K; Nedeljkovic, Maja

    2015-10-01

    This study aimed to test which particular facets of emotion regulation (ER) are most linked to symptoms of hoarding disorder, and whether beliefs about emotional attachment to possessions (EA) mediate this relationship. A non-clinical sample of 150 participants (108 females) completed questionnaires of emotional tolerance (distress tolerance, anxiety sensitivity, negative urgency - impulsivity when experiencing negative emotions), depressed mood, hoarding, and beliefs about emotional attachment to possessions. While all emotional tolerance measures related to hoarding, when considered together and controlling for depression and age, anxiety sensitivity and urgency were the significant predictors. Anxiety sensitivity was fully mediated, and urgency partially mediated, via beliefs regarding emotional attachment to possessions. These findings provide further support for (1) the importance of anxiety sensitivity and negative urgency for hoarding symptoms, and (2) the view that individuals with HD symptoms may rely on items for emotion regulation, leading to stronger beliefs that items are integral to emotional wellbeing. © 2015 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

  19. Gun possession among American youth: a discovery-based approach to understand gun violence.

    Directory of Open Access Journals (Sweden)

    Kelly V Ruggles

    Full Text Available OBJECTIVE: To apply discovery-based computational methods to nationally representative data from the Centers for Disease Control and Preventions' Youth Risk Behavior Surveillance System to better understand and visualize the behavioral factors associated with gun possession among adolescent youth. RESULTS: Our study uncovered the multidimensional nature of gun possession across nearly five million unique data points over a ten year period (2001-2011. Specifically, we automated odds ratio calculations for 55 risk behaviors to assemble a comprehensive table of associations for every behavior combination. Downstream analyses included the hierarchical clustering of risk behaviors based on their association "fingerprint" to 1 visualize and assess which behaviors frequently co-occur and 2 evaluate which risk behaviors are consistently found to be associated with gun possession. From these analyses, we identified more than 40 behavioral factors, including heroin use, using snuff on school property, having been injured in a fight, and having been a victim of sexual violence, that have and continue to be strongly associated with gun possession. Additionally, we identified six behavioral clusters based on association similarities: 1 physical activity and nutrition; 2 disordered eating, suicide and sexual violence; 3 weapon carrying and physical safety; 4 alcohol, marijuana and cigarette use; 5 drug use on school property and 6 overall drug use. CONCLUSIONS: Use of computational methodologies identified multiple risk behaviors, beyond more commonly discussed indicators of poor mental health, that are associated with gun possession among youth. Implications for prevention efforts and future interdisciplinary work applying computational methods to behavioral science data are described.

  20. CHRISTIAN SYMBOLISM IN FYODOR DOSTOEVSKY'S NOVEL "THE POSSESSED" ("DEMONS"

    Directory of Open Access Journals (Sweden)

    Sergei Leonidovich Sharakov

    2013-11-01

    Full Text Available The article raises a question of Christian symbolism in Fyodor Dostoevsky’s novel The Possessed (Demons. The introductory part identifies the purpose of a symbol in Christian poetics through the parallel with ancient symbolism. The author makes a conclusion that the functional role of a symbol in the ancient world and Christian tradition is different. Therefore, the ancient symbol involves a number of interrelated categories, such as fate, intuition or conjecture, inspiration, and predictions. Christian symbolism is based on the idea of redemption and moral innocence. Methodologically, the article is based on a cultural and historical approach, as well as on the comparative academic tradition. The overview of Dostoyevsky’s pre-materials for The Possessed (Demons enables us to suggest the use of Christian symbolism in this novel. Hence, the objective of the study is to investigate a composition of images and symbols in this piece of writing, with a special focus on the image of a chronicler since the storyline of the novel is developed through his perception. We make a supposition that there are several levels of Gospel perception in the artistic vision or consciousness of the chronicler, that form the basis of the symbolical composition of the novel. The article sequentially examines the examples of Christian symbolism, including the connection of ideas, characters and storylines of the novel with the Gospel. Then it gives evidence and reasons for the thesis that the Gospel gives the characters of the novel the grounds for shaping their destiny.

  1. Radiation curable Michael addition compounds

    International Nuclear Information System (INIS)

    Gruber, G.W.; Friedlander, C.B.; McDonald, W.H.; Dowbenko, R.

    1979-01-01

    Radiation polymerizable acrylyloxy-containing reaction products are provided from Michael addition reaction of an amide containing at least two acrylate groups with a primary or secondary amine. The resulting amine adducts of the amide, which contain at least one acrylate group per molecule, possesses high cure rates in air and are useful in compositions for forming coatings. (author)

  2. Immobilized cells of Candida rugosa possessing fumarase activity

    Energy Technology Data Exchange (ETDEWEB)

    Yang, L.; Zhone, L.

    1980-01-01

    Immobilized cells of C. rugosa that possessed fumarase activity were prepared by different methods; the most active immobilized cells were entrapped in polyacrylamide gels. The effects of pH temperature, and divalent cations on the fumarase activity of both immobilized and native cells were the same. Mn/sup 2 +/, Mg/sup 2 +/, Ca/sup 2 +/, and Fe/sup 2 +/ did not protect the immobilized enzyme against thermal inactivation. The activity of immobilized fumarase remained constant during 91 days of storage of 4-6 degrees. The immobilized cell column was used for the continuous production of L-malic acid from 1M fumarate at 30 degrees and pH 8.5. The immobilized column operated steadily for 2 months. Half life of the immobilized fumarase at 30 degrees was 95 days.

  3. Social forces for team coordination in ball possession game

    Science.gov (United States)

    Yokoyama, Keiko; Shima, Hiroyuki; Fujii, Keisuke; Tabuchi, Noriyuki; Yamamoto, Yuji

    2018-02-01

    Team coordination is a basic human behavioral trait observed in many real-life communities. To promote teamwork, it is important to cultivate social skills that elicit team coordination. In the present work, we consider which social skills are indispensable for individuals performing a ball possession game in soccer. We develop a simple social force model that describes the synchronized motion of offensive players. Comparing the simulation results with experimental observations, we uncovered that the cooperative social force, a measure of perception skill, has the most important role in reproducing the harmonized collective motion of experienced players in the task. We further developed an experimental tool that facilitates real players' perceptions of interpersonal distance, revealing that the tool improves novice players' motions as if the cooperative social force were imposed.

  4. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  5. Food additives

    Science.gov (United States)

    ... GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Food additives URL of this page: //medlineplus.gov/ency/article/ ...

  6. Radiation protective agents possessing anti-oxidative properties

    Energy Technology Data Exchange (ETDEWEB)

    Anzai, Kazunori; Ueno, Emi; Yoshida, Akira; Furuse, Masako; Ikota, Nobuo [National Inst. of Radiological Sciences, Research Center for Radiation Safety, Chiba, Chiba (Japan)

    2005-11-15

    The purpose of studies is to see mechanisms of radiation protection of agents possessing anti-oxidative properties because the initial step resulting in radiation hazard is the formation of radicals by water radiolysis. Agents were commercially available or synthesized proxyl derivatives (spin prove agents), commercially available spin-trapping agents, edaravone and TMG (a tocopherol glycoside). Mice and cultured cells were X-irradiated by Shimadzu Pantak HF-320 or 320S. Survivals of cells were determined by colony assay and of mice, to which the agents were given intraperitoneally before or after X-irradiation, within 30 days post irradiation. Plasma and marrow concentrations of proxyls were estimated by electron spin resonance (ESR) spectrometry. Mechanisms of their radiation protective effects were shown different from agent to agent. TMG was found effective even post irradiation, which suggests a possibility for a new drug development. Some (spin trapping agents and TMG), virtually ineffective at the cell level, were found effective in the whole body, suggesting the necessity of studies on their disposition and metabolism. (S.I.)

  7. Radiation protective agents possessing anti-oxidative properties

    International Nuclear Information System (INIS)

    Anzai, Kazunori; Ueno, Emi; Yoshida, Akira; Furuse, Masako; Ikota, Nobuo

    2005-01-01

    The purpose of studies is to see mechanisms of radiation protection of agents possessing anti-oxidative properties because the initial step resulting in radiation hazard is the formation of radicals by water radiolysis. Agents were commercially available or synthesized proxyl derivatives (spin prove agents), commercially available spin-trapping agents, edaravone and TMG (a tocopherol glycoside). Mice and cultured cells were X-irradiated by Shimadzu Pantak HF-320 or 320S. Survivals of cells were determined by colony assay and of mice, to which the agents were given intraperitoneally before or after X-irradiation, within 30 days post irradiation. Plasma and marrow concentrations of proxyls were estimated by electron spin resonance (ESR) spectrometry. Mechanisms of their radiation protective effects were shown different from agent to agent. TMG was found effective even post irradiation, which suggests a possibility for a new drug development. Some (spin trapping agents and TMG), virtually ineffective at the cell level, were found effective in the whole body, suggesting the necessity of studies on their disposition and metabolism. (S.I.)

  8. The possession law suit, caused by forbidden immissions

    Directory of Open Access Journals (Sweden)

    Popov Danica D.

    2015-01-01

    Full Text Available In the Serbian Law and in most of jurisdictions, there are limits on exercising the right of property. The real estate owner must refrain from activities by which the use of other real estate is being impoded through the immission of execive gasses, vapors, smoke, heat noise, tremors etc. The property ownership whose is affected by immission exceeding the set limits, has the right to request a stop of immisions which exceeded the allowed volume of immissions. In article author describes various kinds of immissions. The general feature of this law suit is that there is only discussion on the facts and not for a legal matters. Subject matter jurisdiction for the resolution of such disputes belongs to the court of general jurisdiction, while the disputes itself is a litigation. The special rule of proceedings of action of disturbance are: provisionality of the protection of possession; urgency in proceedings; initiation of proceedings; limiting of objection; prescribing temporary measures; rendering a ruling in the form of order; appeals which may be filed within a short deadline and which does not have suspensive effect (do not delay the execution of the order; revision is not allowed etc.

  9. Novel β-amyloid aggregation inhibitors possessing a turn mimic.

    Science.gov (United States)

    Hamada, Yoshio; Miyamoto, Naoko; Kiso, Yoshiaki

    2015-04-01

    Amyloid β peptide, the main component of senile plaques found in the brain of Alzheimer disease (AD) patients, is a molecular target for AD therapeutic intervention. A number of potential AD therapeutics have been reported, including inhibitors of β-secretase, γ-secretase, and Aβ aggregation, and anti-amyloid agents, such as neprilysin, insulin degrading enzyme (IDE), and Aβ antibodies. Recently, we reported potent small-sized β-secretase (BACE1) inhibitors, which could serve as anti-AD drugs. However AD is a progressive disorder, where dementia symptoms gradually worsen over several decades, and therefore may require many years to get cured. One possible way to achieve a greater therapeutic effect is through simultaneous administration of multiple drugs, similar to those used in Highly Active Anti-Retroviral Therapy (HAART) used to treat AIDS. In order to overcome AD, we took a drug discovery approach to evaluate, novel β-amyloid aggregation inhibitors. Previously, we reported that a tong-type compound possessing a turn mimic as the inhibitor of HIV-1 protease dimerization. Oligomerized amyloid β peptides contain a turn structure within the molecule. Here, we designed and synthesized novel β-amyloid aggregation inhibitors with a turn-mimic template, based on the turn conformer of the oligomerized amyloid β peptides. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Medication possession ratio predicts antiretroviral regimens persistence in Peru.

    Science.gov (United States)

    Salinas, Jorge L; Alave, Jorge L; Westfall, Andrew O; Paz, Jorge; Moran, Fiorella; Carbajal-Gonzalez, Danny; Callacondo, David; Avalos, Odalie; Rodriguez, Martin; Gotuzzo, Eduardo; Echevarria, Juan; Willig, James H

    2013-01-01

    In developing nations, the use of operational parameters (OPs) in the prediction of clinical care represents a missed opportunity to enhance the care process. We modeled the impact of multiple measurements of antiretroviral treatment (ART) adherence on antiretroviral treatment outcomes in Peru. Retrospective cohort study including ART naïve, non-pregnant, adults initiating therapy at Hospital Nacional Cayetano Heredia, Lima-Peru (2006-2010). Three OPs were defined: 1) Medication possession ratio (MPR): days with antiretrovirals dispensed/days on first-line therapy; 2) Laboratory monitory constancy (LMC): proportion of 6 months intervals with ≥1 viral load or CD4 reported; 3) Clinic visit constancy (CVC): proportion of 6 months intervals with ≥1 clinic visit. Three multi-variable Cox proportional hazard (PH) models (one per OP) were fit for (1) time of first-line ART persistence and (2) time to second-line virologic failure. All models were adjusted for socio-demographic, clinical and laboratory variables. 856 patients were included in first-line persistence analyses, median age was 35.6 years [29.4-42.9] and most were male (624; 73%). In multivariable PH models, MPR (per 10% increase HR=0.66; 95%CI=0.61-0.71) and LMC (per 10% increase 0.83; 0.71-0.96) were associated with prolonged time on first-line therapies. Among 79 individuals included in time to second-line virologic failure analyses, MPR was the only OP independently associated with prolonged time to second-line virologic failure (per 10% increase 0.88; 0.77-0.99). The capture and utilization of program level parameters such as MPR can provide valuable insight into patient-level treatment outcomes.

  11. An upper and lower bound of the Medication Possession Ratio

    Directory of Open Access Journals (Sweden)

    Sperber CM

    2017-08-01

    Full Text Available Christian M Sperber, Suren R Samarasinghe, Grace P Lomax Patient Connect Limited, Guildford, UK Background: The Medication Possession Ratio (MPR is a ubiquitous and central measurement for adherence in the health care industry. However, attempts to standardize its calculation have failed, possibly due to the opacity of a single, static MPR, incapability of directly lending itself to a variety of studies, and challenges of comparing the value across studies. This work shows that the MPR strictly depends on the length of the time interval over which it is measured as well as on the dominant dispense quantity for short time intervals. Furthermore, removing a proportion of the patient cohort based on the number of acquisitions may also have a severe impact on the MPR. Therefore, it is suggested that the MPR is represented as a trend over a range of time intervals. To this end, an upper and lower bound of the MPR trend is developed with an upper bound acknowledging patients who change their treatment and the lower bound acknowledging patients who discontinue their treatment.Purpose: Introducing a representation of the MPR value as a trend rather than a static number by developing a quantitative description of an upper and lower bound of the MPR trend, while shedding light on the impacts on prefiltering the patient cohort.Patients and methods: Anonymized patient-level data was utilized as an example for a suggested calculation of an upper and lower bound of the MPR.Results: Representation of the MPR for a predefined time interval precludes a reliable MPR assessment. A quantitative approach is suggested to generate an upper and lower trend of the MPR while emphasizing the impact on removing patients with a limited number of acquisitions.Conclusion: An upper and lower trend makes the MPR more transparent and allows a better comparison across different studies. Removing patients with a limited number of acquisitions should be avoided. Keywords: MPR

  12. Are symptoms of spirit possessed patients covered by the DSM-IV or DSM-5 criteria for possession trance disorder? A mixed-method explorative study in Uganda

    NARCIS (Netherlands)

    van Duijl, M.; Kleyn, W.; de Jong, J.

    2013-01-01

    Introduction and aims As in many cultures, spirit possession is a common idiom of distress in Uganda. The DSM-IV contains experimental research criteria for dissociative and possession trance disorder (DTD and PTD), which are under review for the DSM-5. In the current proposed categories of the

  13. The Secret Prover : Proving Possession of Arbitrary Files While not Giving Them Away

    NARCIS (Netherlands)

    Teepe, Wouter

    2005-01-01

    The Secret Prover is a Java application which allows a user (A) to prove to another user (B), that A possesses a file. If B also possesses this file B will get convinced, and if B does not possess this file B will gain no information on (the contents of) this file. This is the first implementation

  14. LEGAL SIGNIFICANCE AND PROTECTION OF POSSESSION IN THE REPUBLIC OF MACEDONIA

    Directory of Open Access Journals (Sweden)

    Vojo Belovski

    2015-04-01

    Full Text Available In this paper it will be discussed the legal significance and protection of possession in the Republic of Macedonia. Below it will be listed the kinds of possession, and finally the rules for possession termination will be explained. The possession is an indicator that the person who rules one item is also a right holder of that item. The possession itself occurs in two types specially authorized by a law and pure factual power behind which stands no right. The possession enjoys legal protection. Below in the paper it is processed the judicial protection of the possession which is given based on complaint for disturbance of possession and action to recover the possession. The important thing at the judicial protection is that the rulers’ protection is given to the last actual possession of the item, but it is not disputed the right of possession. Further in this paper it is included the protection of indirect possession where a complaint can be made by the indirect holder of the item, the judicial protection of possessory, possession protection of the heirs and permitted self – help for unauthorized harassment and revoking of the possession. With respect to the termination of the actual power of the item, listed and processed are the ways when the item failed, when the item was lost, when it is obvious that it won’t be returned, when the ruler had freely left it and when the item is not taken from him and the ruler hasn’t realized the right to possession.

  15. From distress to disease: a critique of the medicalisation of possession in DSM-5.

    Science.gov (United States)

    Padmanabhan, Divya

    2017-12-01

    This paper critiques the category of possession-form dissociative identity disorder as defined in the Diagnostic and Statistical Manual of Mental Disorders 5 (DSM-5) published in 2013 by the American Psychiatric Association (APA). The DSM as an index of psychiatry pathologises possession by categorising it as a form of dissociative identity disorder. Drawing upon ethnographic fieldwork, this paper argues that such a pathologisation medicalises possession, which is understood as a non-pathological condition in other contexts such as by those individuals who manifest possession at a temple in Kerala, South India. Through medicalising and further by creating distinctions between acceptable and pathological possession, the DSM converts a form of distress into a disease. This has both conceptual and pragmatic implications. The temple therefore becomes reduced to a culturally acceptable site for the manifestation of a mental illness in a form that is culturally available and possession is explained solely through a biomedical framework, denying alternative conceptualisations and theories which inform possession. By focussing on the DSM-5 classification of possession and the limitations of such a classification, this paper seeks to posit an alternative conceptualisation of possession by engaging with three primary areas which are significant in the DSM categorisation of possession: the DSM's conceptualisation of self in the singular, the distinction between pathological and non-pathological forms of possession, and the limitations of the DSM's equation of the condition of possession with the manifestation of possession. Finally, the paper briefly highlights alternative conceptualisations of possession, which emerged from the perspective of those seeking to heal possession at the Chottanikkara temple.

  16. The Mirrored Hand Illusion: I Control, So I Possess?

    Science.gov (United States)

    Zhou, Aibao; Zhang, Yanchi; Yin, Yulong; Yang, Yang

    2015-01-01

    Certain situations may not only cause people to misjudge external information but also distort people's perception of themselves. The present study is the first to report the mirrored hand illusion which could be generated when the experimenter imitated the fist-clenching movements of the subject synchronously. The subjects formed the illusion that the experimenter's hand was "something I can control" when being imitated synchronously. In addition, a sense of ownership over the alien hand was established by integrating multisensory signals and comparing these signals with preexisting body presentations. This method might represent a new avenue for research on the formation of self-consciousness. © The Author(s) 2015.

  17. A novel thiourea type organocatalyst possessing a single NH functionality.

    Science.gov (United States)

    Jovanovic, Predrag; Petkovic, Milos; Simic, Milena; Ivkovic, Branka; Savic, Vladimir

    2016-07-12

    A novel thiourea organocatalyst was rationally designed by altering a typical H-bonding pattern of thiourea derivatives and utilising the potential of the 3,5-bis(trifluoromethyl)phenyl motif to participate in the H-bond formation. This unique catalyst afforded the products of the α-amination and Michael reaction in excellent yields and with a high level of stereoselectivity. Although additional studies are necessary to establish the full potential of the catalyst and to broaden its application further, the presented results may indicate alternative routes for further exploration of the thiourea class of organocatalysts.

  18. Does fermented milk possess antihypertensive effect in humans?

    DEFF Research Database (Denmark)

    Usinger, Lotte; Ibsen, Hans; Jensen, Lars T

    2009-01-01

    The putative antihypertensive effect of milk after fermentation by lactic bacteria has attracted attention over the past 20 years. Research on fermented milk and hypertension has mainly focused on the content of peptides with in-vitro angiotensin converting enzyme-inhibitor effect. However......, fermented milk products contain several proteins, peptides and minerals, all with possible different antihypertensive modes of actions. The burden of cardiovascular events in industrialized countries caused by hypertension is considerable. Diet modifications are one way to lower blood pressure......, and fermented milk could be a feasible way. In this review, interventional human studies of the possible antihypertensive effect of fermented milk are evaluated. The results are diverging, and the antihypertensive effect is still debatable. Additionally, present knowledge of bioavailability and in-vivo actions...

  19. Effect of playing tactics on achieving score-box possessions in a random series of team possessions from Norwegian professional soccer matches.

    Science.gov (United States)

    Tenga, Albin; Holme, Ingar; Ronglan, Lars Tore; Bahr, Roald

    2010-02-01

    Methods of analysis that include an assessment of opponent interactions are thought to provide a more valid means of team match performance. The purpose of this study was to examine the effect of playing tactics on achieving score-box possession by assessing opponent interactions in Norwegian elite soccer matches. We analysed a random series of 1703 team possessions from 163 of 182 (90%) matches played in the professional men's league during the 2004 season. Multidimensional qualitative data obtained from ten ordered categorical variables were used. Offensive tactics were more effective in producing score-box possessions when playing against an imbalanced defence (28.5%) than against a balanced defence (6.5%) (P tactics on producing score-box possessions, and improves the validity of team match-performance analysis in soccer.

  20. Traumatic Experience and Somatoform Dissociation Among Spirit Possession Practitioners in the Dominican Republic.

    Science.gov (United States)

    Schaffler, Yvonne; Cardeña, Etzel; Reijman, Sophie; Haluza, Daniela

    2016-03-01

    Recent studies in African contexts have revealed a strong association between spirit possession and severe trauma, with inclusion into a possession cult serving at times a therapeutic function. Research on spirit possession in the Dominican Republic has so far not included quantitative studies of trauma and dissociation. This study evaluated demographic variables, somatoform dissociative symptoms, and potentially traumatizing events in the Dominican Republic with a group of Vodou practitioners that either do or do not experience spirit possession. Inter-group comparisons revealed that in contrast to non-possessed participants (n = 38), those experiencing spirit possession (n = 47) reported greater somatoform dissociation, more problems with sleep, and previous exposure to mortal danger such as assaults, accidents, or diseases. The two groups did not differ significantly in other types of trauma. The best predictor variable for group classification was somatoform dissociation, although those items could also reflect the experience of followers during a possession episode. A factor analysis across variables resulted in three factors: having to take responsibility early on in life and taking on a professional spiritual role; traumatic events and pain; and distress/dissociation. In comparison with the non-possessed individuals, the possessed ones did not seem to overall have a remarkably more severe story of trauma and seemed to derive economic gains from possession practice.

  1. Subsurface Endospore-Forming Bacteria Possess Bio-Sealant Properties.

    Science.gov (United States)

    Basha, Sreenivasulu; Lingamgunta, Lakshman Kumar; Kannali, Jayakumar; Gajula, Swarna Kumari; Bandikari, Ramesh; Dasari, Sreenivasulu; Dalavai, Veena; Chinthala, Paramageetham; Gundala, Prasada Babu; Kutagolla, Peera; Balaji, Vinodh Kumar

    2018-04-24

    Concrete is a strong and fairly inexpensive building substance, but has several disadvantages like cracking that allows corrosion, thus reducing its lifespan. To mitigate these complications, long-lasting microbial self-healing cement is an alternative that is eco-friendly and also actively repairs cracks. The present paper describes the detailed experimental investigation on compressive strength of cement mortars, mixed with six alkaliphilic bacteria, isolated from subsurface mica mines of high alkalinity. The experiments showed that the addition of alkaliphilic isolates at different cell concentrations (10 4 and 10 6 cells/ml) enhanced the compressive strength of cement mortar, because the rapid growth of bacteria at high alkalinity precipitates calcite crystals that lead to filling of pores and densifying the concrete mix. Thus, Bacillus subtilis (SVUNM4) showed the highest compressive strength (28.61%) of cement mortar at 10 4 cells/ml compared to those of other five alkaliphilic isolates (Brevibacillus sp., SVUNM15-22.1%; P. dendritiformis, SVUNM11-19.9%; B. methylotrophicus, SVUNM9-16%; B. licheniformis, SVUNM14-12.7% and S. maltophilia, SVUNM13-9.6%) and controlled cement mortar as well. This method resulted in the filling of cracks in concrete with calcite (CaCO 3 ), which was observed by scanning electron microscopy (SEM). Our results showed that the alkaliphilic bacterial isolates used in the study are effective in self-healing and repair of concrete cracks.

  2. New families of conservative systems on $S^2$ possessing an integral of fourth degree in momenta

    OpenAIRE

    Selivanova, Elena N.

    1997-01-01

    There is a well-known example of integrable conservative system on $S^2$, the case of Kovalevskaya in the dynamics of a rigid body, possessing an integral of fourth degree in momenta. Goryachev proposed a one-parameter family of examples of conservative systems on $S^2$ possessing an integral of fourth degree in momenta which includes the case of Kovalevskaya. In this paper we proposed new examples of conservative systems on $S^2$ possessing an integral of fourth degree in momenta.

  3. Possession Zone as a Performance Indicator in Football. The Game of the Best Teams

    Directory of Open Access Journals (Sweden)

    Claudio A. Casal

    2017-07-01

    Full Text Available Possession time in football has been widely discussed in research but few studies have analyzed the importance of the field area in which possession occurs. The objective of this study was to identify the existence of significant differences in the field zone of ball possession between successful and unsuccessful teams and to acknowledge if the match status modulates the possession model. To this end, 2,284 attacks were analyzed corresponding to the matches in the final phase of the UEFA Euro 2016 France, recording possession time and field zone in which possession occurred. Video recordings of matches were analyzed and coded post-event using notational analysis. We have found that successful offensive game patterns are different from unsuccessful ones. Specifically, field zone in which major possession occurs changes significantly between successful and unsuccessful teams (x2 = 15.72, p < 0.05 and through Welch’s T significant differences were detected in possession time between successful and unsuccessful teams (H = 24.289, p < 0.001. The former are characterized by longer possession times, preferably in the middle offensive zone, on the other hand, unsuccessful teams have shorter possession times and preferably on the middle defensive zone. Logistic regression also allowed us to identify that greater possession in the middle offensive zone is a good indicator of success in the offensive game, allowing us to predict a greater chance of victory in the match. Specifically, every time the teams achieve possession in the middle offensive zone, the chance of winning the match will increase 1.72 times and, the probability of winning the match making longer possessions in the middle offensive zone is 44.25%. Applying the Kruskal–Wallis test we have also been able to verify how match status modulates the teams possession time, specifically, when teams are winning they have longer possessions x2 = 92.628, p = 0.011. Results obtained are expected to

  4. 19 CFR 7.2 - Insular possessions of the United States other than Puerto Rico.

    Science.gov (United States)

    2010-04-01

    ... than Puerto Rico. 7.2 Section 7.2 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF... NAVAL STATION § 7.2 Insular possessions of the United States other than Puerto Rico. (a) Insular possessions of the United States other than Puerto Rico are also American territory but, because those insular...

  5. 50 CFR 92.6 - Use and possession of migratory birds.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Use and possession of migratory birds. 92... INTERIOR (CONTINUED) MISCELLANEOUS PROVISIONS MIGRATORY BIRD SUBSISTENCE HARVEST IN ALASKA General Provisions § 92.6 Use and possession of migratory birds. You may not sell, offer for sale, purchase, or offer...

  6. 50 CFR 600.1204 - Shark finning; possession at sea and landing of shark fins.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Shark finning; possession at sea and landing of shark fins. 600.1204 Section 600.1204 Wildlife and Fisheries FISHERY CONSERVATION AND... PROVISIONS Shark Finning § 600.1204 Shark finning; possession at sea and landing of shark fins. (a)(1) No...

  7. 10 CFR 70.20a - General license to possess special nuclear material for transport.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false General license to possess special nuclear material for transport. 70.20a Section 70.20a Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DOMESTIC LICENSING OF... transport. (a) A general license is issued to any person to possess formula quantities of strategic special...

  8. Stability properties of solutions to nonlinear models possessing a sign-undefined metric

    International Nuclear Information System (INIS)

    Barashenkov, I.V.

    1983-01-01

    Multicomponent field systems possessing a sign-undefined internal space metric, in particular models with a noncompact global invariance group are investigated. It is shown that the energy cannot have even a conditional relative minimum. It is demonstrated, nevertheless, that the corresponding nonlinear equations of motion are permitted to possess stable particle-like solutions

  9. Stability properties of solutions to nonlinear models possessing a sign-undefined metric

    International Nuclear Information System (INIS)

    Barashenkov, I.V.

    1983-01-01

    Multicomponent field systems possessing a sign-undefined internal space metric, in particular models with a noncompact global invariance group, are investigated. It is shown that the energy cannot have even a conditional relative minimum. It is demonstrated, nevertheless, that the corresponding nonlinear equations of motion are permitted to possess stable particle-like solutions. (Auth.)

  10. The Regulation of the Possession of Weapons at Gatherings | du Toit

    African Journals Online (AJOL)

    The Act also amends the Regulation of Gatherings Act 205 of 1993 to prohibit the possession of any dangerous weapon at a gathering or demonstration. ... (b) possession of dangerous weapons during the participation in any religious or cultural activities or lawful sport, recreation or entertainment or (c) legitimate collection, ...

  11. The expected value of possession in professional rugby league match-play.

    Science.gov (United States)

    Kempton, Thomas; Kennedy, Nicholas; Coutts, Aaron J

    2016-01-01

    This study estimated the expected point value for starting possessions in different field locations during rugby league match-play and calculated the mean expected points for each subsequent play during the possession. It also examined the origin of tries scored according to the method of gaining possession. Play-by-play data were taken from all 768 regular-season National Rugby League (NRL) matches during 2010-2013. A probabilistic model estimated the expected point outcome based on the net difference in points scored by a team in possession in a given situation. An iterative method was used to approximate the value of each situation based on actual scoring outcomes. Possessions commencing close to the opposition's goal-line had the highest expected point equity, which decreased as the location of the possession moved towards the team's own goal-line. Possessions following an opposition error, penalty or goal-line dropout had the highest likelihood of a try being scored on the set subsequent to their occurrence. In contrast, possessions that follow an opposition completed set or a restart were least likely to result in a try. The expected point values framework from our model has applications for informing playing strategy and assessing individual and team performance in professional rugby league.

  12. Are symptoms of spirit possessed patients covered by the DSM-IV or DSM-5 criteria for possession trance disorder? A mixed-method explorative study in Uganda.

    Science.gov (United States)

    van Duijl, Marjolein; Kleijn, Wim; de Jong, Joop

    2013-09-01

    As in many cultures, spirit possession is a common idiom of distress in Uganda. The DSM-IV contains experimental research criteria for dissociative and possession trance disorder (DTD and PTD), which are under review for the DSM-5. In the current proposed categories of the DSM-5, PTD is subsumed under dissociative identity disorder (DID) and DTD under dissociative disorders not elsewhere classified. Evaluation of these criteria is currently urgently required. This study explores the match between local symptoms of spirit possession in Uganda and experimental research criteria for PTD in the DSM-IV and proposed criteria for DID in the DSM-5. A mixed-method approach was used combining qualitative and quantitative research methods. Local symptoms were explored of 119 spirit possessed patients, using illness narratives and a cultural dissociative symptoms' checklist. Possible meaningful clusters of symptoms were inventoried through multiple correspondence analysis. Finally, local symptoms were compared with experimental criteria for PTD in the DSM-IV and proposed criteria for DID in the DSM-5. Illness narratives revealed different phases of spirit possession, with passive-influence experiences preceding the actual possession states. Multiple correspondence analysis of symptoms revealed two dimensions: 'passive' and 'active' symptoms. Local symptoms, such as changes in consciousness, shaking movements, and talking in a voice attributed to spirits, match with DSM-IV-PTD and DSM-5-DID criteria. Passive-influence experiences, such as feeling influenced or held by powers from outside, strange dreams, and hearing voices, deserve to be more explicitly described in the proposed criteria for DID in the DSM-5. The suggested incorporation of PTD in DID in the DSM-5 and the envisioned separation of DTD and PTD in two distinctive categories have disputable aspects.

  13. "Satan has afflicted me!" Jinn-possession and mental illness in the Qur'an.

    Science.gov (United States)

    Islam, F; Campbell, R A

    2014-02-01

    Mental health stigma in Muslim communities may be partly due to a commonly held belief among some Muslims about the supernatural causes of mental illness (i.e. jinn-possession brought on by one's sinful life). A thematic analysis was carried out on four English translations and the Arabic text of the Qur'an to explore whether the connection between jinn-possession and insanity exists within the Muslim holy book. No connection between spirit-possession and madness or mental illness was found. Pagans taunted and labelled people as jinn-possessed only to ostracize and scapegoat. Linking the labelling of people as jinn-possession to a pagan practice may be used to educate Muslims, so they can reassess their community's stigma towards the mentally ill.

  14. Haunted by ghosts: prevalence, predictors and outcomes of spirit possession experiences among former child soldiers and war-affected civilians in Northern Uganda.

    Science.gov (United States)

    Neuner, Frank; Pfeiffer, Anett; Schauer-Kaiser, Elisabeth; Odenwald, Michael; Elbert, Thomas; Ertl, Verena

    2012-08-01

    Phenomena of spirit possession have been documented in many cultures. Some authors have argued that spirit possession is a type of psychopathology, and should be included as a category in diagnostic manuals of mental disorders. However, there are hardly any quantitative studies that report the prevalence of spirit possession on a population level and that provide evidence for its validity as a psychopathological entity. In an epidemiological study that was carried out in 2007 and 2008 with N = 1113 youths and young adults aged between 12 and 25 years in war-affected regions of Northern Uganda we examined the prevalence, predictors and outcomes of cen, a local variant of spirit possession. Randomly selected participants were interviewed using a scale of cen, measures of psychopathology (PTSD and depression) as well as indicators of functional outcome on different levels, including suicide risk, daily activities, perceived discrimination, physical complaints and aggression. We found that cen was more common among former child soldiers then among subjects without a history of abduction. Cen was related to extreme levels of traumatic events and uniquely predicted functional outcome even when the effects of PTSD and depression were controlled for. Our findings show that a long-lasting war that is accompanied by the proliferation of spiritual and magical beliefs and propaganda can lead to high levels of harmful spirit possession. In addition, we provide evidence for the incremental validity of spirit possession as a trauma-related psychological disorder in this context. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Unravelling the spirits’ message: a study of help-seeking steps and explanatory models among patients suffering from spirit possession in Uganda

    Science.gov (United States)

    2014-01-01

    As in many cultures, also in Uganda spirit possession is a common idiom of distress associated with traumatic experiences. In the DSM-IV and -5, possession trance disorders can be classified as dissociative disorders. Dissociation in Western countries is associated with complicated, time-consuming and costly therapies. Patients with spirit possession in SW Uganda, however, often report partial or full recovery after treatment by traditional healers. The aim of this study is to explore how the development of symptoms concomitant help-seeking steps, and explanatory models (EM) eventually contributed to healing of patients with spirit possession in SW Uganda. Illness narratives of 119 patients with spirit possession referred by traditional healers were analysed using a mixed-method approach. Treatments of two-thirds of the patients were unsuccessful when first seeking help in the medical sector. Their initially physical symptoms subsequently developed into dissociative possession symptoms. After an average of two help-seeking steps, patients reached a healing place where 99% of them found satisfactory EM and effective healing. During healing sessions, possessing agents were summoned to identify themselves and underlying problems were addressed. Often-mentioned explanations were the following: neglect of rituals and of responsibilities towards relatives and inheritance, the call to become a healer, witchcraft, grief, and land conflicts. The results demonstrate that traditional healing processes of spirit possession can play a role in restoring connections with the supra-, inter-, intra-, and extra-human worlds. It does not always seem necessary to address individual traumatic experiences per se, which is in line with other research in this field. The study leads to additional perspectives on treatment of trauma-related dissociation in Western countries and on developing effective mental health services in low -and middle-income countries. PMID:24940355

  16. Unravelling the spirits' message: a study of help-seeking steps and explanatory models among patients suffering from spirit possession in Uganda.

    Science.gov (United States)

    van Duijl, Marjolein; Kleijn, Wim; de Jong, Joop

    2014-01-01

    As in many cultures, also in Uganda spirit possession is a common idiom of distress associated with traumatic experiences. In the DSM-IV and -5, possession trance disorders can be classified as dissociative disorders. Dissociation in Western countries is associated with complicated, time-consuming and costly therapies. Patients with spirit possession in SW Uganda, however, often report partial or full recovery after treatment by traditional healers. The aim of this study is to explore how the development of symptoms concomitant help-seeking steps, and explanatory models (EM) eventually contributed to healing of patients with spirit possession in SW Uganda. Illness narratives of 119 patients with spirit possession referred by traditional healers were analysed using a mixed-method approach. Treatments of two-thirds of the patients were unsuccessful when first seeking help in the medical sector. Their initially physical symptoms subsequently developed into dissociative possession symptoms. After an average of two help-seeking steps, patients reached a healing place where 99% of them found satisfactory EM and effective healing. During healing sessions, possessing agents were summoned to identify themselves and underlying problems were addressed. Often-mentioned explanations were the following: neglect of rituals and of responsibilities towards relatives and inheritance, the call to become a healer, witchcraft, grief, and land conflicts. The results demonstrate that traditional healing processes of spirit possession can play a role in restoring connections with the supra-, inter-, intra-, and extra-human worlds. It does not always seem necessary to address individual traumatic experiences per se, which is in line with other research in this field. The study leads to additional perspectives on treatment of trauma-related dissociation in Western countries and on developing effective mental health services in low -and middle-income countries.

  17. Pathological spirit possession as a cultural interpretation of trauma-related symptoms.

    Science.gov (United States)

    Hecker, Tobias; Barnewitz, Eva; Stenmark, Hakon; Iversen, Valentina

    2016-07-01

    Spirit possession is a phenomenon frequently occurring in war-torn countries. It has been shown to be an idiom of distress entailing dissociative symptoms. However, its association with trauma exposure and trauma-related disorders remains unclear. This study aimed to explore subjective disease models and the relationship between pathological spirit possession and trauma-related disorders in the Eastern Democratic Republic of the Congo. Seventy-three (formerly) possessed persons (74% female, mean age = 34 years), referred by traditional and spiritual healers, were interviewed about their experiences of pathological spirit possession, trauma exposure, posttraumatic stress disorder (PTSD) symptoms, depressive symptoms, shame and guilt, psychotic symptoms, somatic complaints, and the impairment of psychosocial functioning. The most common disease model for pathological spirit possession was another person having sent the spirit, mostly a family member or a neighbor, out of jealousy or conflict over resources. Significant correlations were found between spirit possession over lifetime and PTSD symptom severity, feelings of shame and guilt, depressive symptoms, somatic complaints, and psychotic symptoms. Spirit possession during the preceding 4 weeks was associated with PTSD symptom severity, impairment of psychosocial functioning, and psychotic symptom severity. The results of this study indicate that pathological spirit possession is a broad explanatory framework for various subjectively unexplainable mental and physical health problems, including but not limited to trauma-related disorders. Understanding pathological spirit possession as a subjective disease model for various mental and physical health problems may help researchers and clinicians to develop culturally sensitive treatment approaches for affected individuals. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  18. Mycobacterium avium Possesses Extracellular DNA that Contributes to Biofilm Formation, Structural Integrity, and Tolerance to Antibiotics.

    Directory of Open Access Journals (Sweden)

    Sasha J Rose

    Full Text Available Mycobacterium avium subsp. hominissuis is an opportunistic pathogen that is associated with biofilm-related infections of the respiratory tract and is difficult to treat. In recent years, extracellular DNA (eDNA has been found to be a major component of bacterial biofilms, including many pathogens involved in biofilm-associated infections. To date, eDNA has not been described as a component of mycobacterial biofilms. In this study, we identified and characterized eDNA in a high biofilm-producing strain of Mycobacterium avium subsp. hominissuis (MAH. In addition, we surveyed for presence of eDNA in various MAH strains and other nontuberculous mycobacteria. Biofilms of MAH A5 (high biofilm-producing strain and MAH 104 (reference strain were established at 22°C and 37°C on abiotic surfaces. Acellular biofilm matrix and supernatant from MAH A5 7 day-old biofilms both possess abundant eDNA, however very little eDNA was found in MAH 104 biofilms. A survey of MAH clinical isolates and other clinically relevant nontuberculous mycobacterial species revealed many species and strains that also produce eDNA. RAPD analysis demonstrated that eDNA resembles genomic DNA. Treatment with DNase I reduced the biomass of MAH A5 biofilms when added upon biofilm formation or to an already established biofilm both on abiotic surfaces and on top of human pharyngeal epithelial cells. Furthermore, co-treatment of an established biofilm with DNase 1 and either moxifloxacin or clarithromycin significantly increased the susceptibility of the bacteria within the biofilm to these clinically used antimicrobials. Collectively, our results describe an additional matrix component of mycobacterial biofilms and a potential new target to help treat biofilm-associated nontuberculous mycobacterial infections.

  19. 48 CFR 52.236-11 - Use and Possession Prior to Completion.

    Science.gov (United States)

    2010-10-01

    ... possession or use shall not be deemed an acceptance of any work under the contract. (b) While the Government... adjustment shall be made in the contract price or the time of completion, and the contract shall be modified...

  20. Schizophrenia-The spirit possessed 23 year old male from rural ...

    African Journals Online (AJOL)

    A case of a twenty-three year old rural Ghanaian male suffering from schizophrenia and presenting as “possessed by spirits” is reported. Treatment, and outcome by physical means with chlorpromazine; and implications for further research are discussed.

  1. 32 CFR 552.122 - Personnel not authorized to possess or retain personal weapons.

    Science.gov (United States)

    2010-07-01

    ... THE ARMY MILITARY RESERVATIONS AND NATIONAL CEMETERIES REGULATIONS AFFECTING MILITARY RESERVATIONS... person who has been convicted in any court of the possession, use, or sale of marijuana, dangerous or...

  2. Additive Manufacturing in the Marine Corps

    Science.gov (United States)

    2015-06-01

    TERMS additive manufacturing, 3D printing, improving logistics 15. NUMBER OF PAGES 123 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT...One such method is ultrasonic agglomeration. The process produces compact snack items that are nutrient-dense and shelf-stable. Currently Army...possess outdated technology. Additionally, prices for the printers are dropping significantly.202 Therefore, the Marine Corps will not only have outdated

  3. O olhar dos psiquiatras brasileiros sobre os fenômenos de transe e possessão Brazilian psychiatrists’ approaches on trance and possession phenomena

    Directory of Open Access Journals (Sweden)

    Angélica A. Silva de Almeida

    2007-01-01

    Full Text Available CONTEXTO: Os fenômenos de transe e possessão despertaram o interesse da comunidade psiquiátrica brasileira, gerando posturas diversificadas. OBJETIVOS: Descrever e analisar como os fenômenos de transe e possessão foram tratados pelos psiquiatras brasileiros: seu impacto na teoria, na pesquisa e na prática clínica entre 1900 e 1950. MÉTODO: Análise de artigos científicos e leigos, teses e livros sobre transes e possessões produzidos pelos psiquiatras brasileiros entre 1900 e 1950. RESULTADOS: Identificam-se duas correntes de pensamento entre os psiquiatras. A primeira, vinculada às Faculdades de Medicina do Rio de Janeiro e São Paulo, sob forte influência de autores franceses, deteve-se mais na periculosidade do espiritismo para a saúde mental. Defendia a adoção de medidas repressivas com o poder público. O segundo grupo de psiquiatras, ligado às Faculdades de Medicina da Bahia e Pernambuco, embora não desconsiderasse o caráter patológico ou "primitivo" dos fenômenos de transe e possessão, apresentou uma visão mais antropológica e culturalista. Considerando tais fenômenos como manifestações étnicas ou culturais, alguns defenderam o controle médico e a educação do povo para o abandono dessas práticas "primitivas". Outros não consideravam os fenômenos mediúnicos como desencadeadores da loucura, mas manifestações não-patológicas de um universo cultural, além de não vinculá-los ao atraso cultural da população. CONCLUSÕES: As religiões mediúnicas foram objeto de estudo por longo período, resultando hipóteses e práticas diferenciadas por parte da comunidade psiquiátrica brasileira, constituindo-se oportunidade privilegiada para o estudo do impacto dos fatores socioculturais na atividade psiquiátrica.BACKGROUND: Trance and possession experiences have raised interest among Brazilian psychiatrists resulting in a variety of approaches. OBJECTIVES: To describe and analyze how Brazilian psychiatrists

  4. Co-possession of phosphodiesterase type-5 inhibitors (PDE5-I) with nitrates.

    Science.gov (United States)

    Chang, Li-Ling; Ma, Mark; Allmen, Heather von; Henderson, Scott C; Harper, Kristine; Hornbuckle, Kenneth

    2010-06-01

    Estimate the proportion of phosphodiesterase type-5 inhibitor (PDE5-I) patients who co-possess nitrates and compare the proportion of tadalafil patients dispensed nitrates to a matched control group. Secondarily, examine the percentage of co-possession of PDE5-Is and nitrates where the products were dispensed on the same day or written by the same prescriber. Male patients aged 18+ years filling PDE5-I prescriptions between December 2003 and March 2006 were identified using a U.S. longitudinal prescription database (IMS Health LRx). Similar patients not dispensed a PDE5-I during this period were matched to the tadalafil-dispensed cohort using a propensity score approach. Co-possession, as a proxy for concurrent use, was defined as an overlap in time on therapy for a PDE5-I and nitrate and was compared for the three PDE5-Is and for tadalafil to the matched control group. Among 601,063 tadalafil patients, 3.31% were dispensed a nitrate during the study period, compared to 6.18% in control patients (n = 601,063). When co-possessed prescriptions were defined by overlapping exposure periods, the proportion of PDE5-I patients with co-possessed nitrates ranged from 1.44% (tadalafil) to 1.72% (vardenafil) and 2.13% (sildenafil). Co-possession percentages of PDE5-I prescriptions were 0.83% for tadalafil and 1.07% for sildenafil and vardenafil. The majority (54.29%) of co-possessed PDE5-I and nitrate prescriptions had the nitrate dispensed prior to the PDE5-I prescription identified in the study cohort. Keeping in mind the limitations of observational studies, these results suggest that co-dispensing of nitrates and PDE5-Is is low. Compared to control patients, the proportion of nitrate co-possession was lowest for patients filling tadalafil. Tadalafil patients also had the lowest co-possessed proportion among the three PDE5-I cohorts. While the majority of co-possessed drug pairs were prescribed by different providers, the highest percentage of co-prescribing from the same

  5. Cytotoxic protein from the mushroom Coprinus comatus possesses a unique mode for glycan binding and specificity

    Science.gov (United States)

    Zhang, Peilan; Yang, Guang; Xia, Changqing; Polston, Jane E.; Li, Gengnan; Li, Shiwu; Lin, Zhao; Yang, Li-jun; Bruner, Steven D.

    2017-01-01

    Glycans possess significant chemical diversity; glycan binding proteins (GBPs) recognize specific glycans to translate their structures to functions in various physiological and pathological processes. Therefore, the discovery and characterization of novel GBPs and characterization of glycan–GBP interactions are significant to provide potential targets for therapeutic intervention of many diseases. Here, we report the biochemical, functional, and structural characterization of a 130-amino-acid protein, Y3, from the mushroom Coprinus comatus. Biochemical studies of recombinant Y3 from a yeast expression system demonstrated the protein is a unique GBP. Additionally, we show that Y3 exhibits selective and potent cytotoxicity toward human T-cell leukemia Jurkat cells compared with a panel of cancer cell lines via inducing caspase-dependent apoptosis. Screening of a glycan array demonstrated GalNAcβ1–4(Fucα1–3)GlcNAc (LDNF) as a specific Y3-binding ligand. To provide a structural basis for function, the crystal structure was solved to a resolution of 1.2 Å, revealing a single-domain αβα-sandwich motif. Two monomers were dimerized to form a large 10-stranded, antiparallel β-sheet flanked by α-helices on each side, representing a unique oligomerization mode among GBPs. A large glycan binding pocket extends into the dimeric interface, and docking of LDNF identified key residues for glycan interactions. Disruption of residues predicted to be involved in LDNF/Y3 interactions resulted in the significant loss of binding to Jurkat T-cells and severely impaired their cytotoxicity. Collectively, these results demonstrate Y3 to be a GBP with selective cytotoxicity toward human T-cell leukemia cells and indicate its potential use in cancer diagnosis and treatment. PMID:28784797

  6. Cytotoxic protein from the mushroom Coprinus comatus possesses a unique mode for glycan binding and specificity.

    Science.gov (United States)

    Zhang, Peilan; Li, Kunhua; Yang, Guang; Xia, Changqing; Polston, Jane E; Li, Gengnan; Li, Shiwu; Lin, Zhao; Yang, Li-Jun; Bruner, Steven D; Ding, Yousong

    2017-08-22

    Glycans possess significant chemical diversity; glycan binding proteins (GBPs) recognize specific glycans to translate their structures to functions in various physiological and pathological processes. Therefore, the discovery and characterization of novel GBPs and characterization of glycan-GBP interactions are significant to provide potential targets for therapeutic intervention of many diseases. Here, we report the biochemical, functional, and structural characterization of a 130-amino-acid protein, Y3, from the mushroom Coprinus comatus Biochemical studies of recombinant Y3 from a yeast expression system demonstrated the protein is a unique GBP. Additionally, we show that Y3 exhibits selective and potent cytotoxicity toward human T-cell leukemia Jurkat cells compared with a panel of cancer cell lines via inducing caspase-dependent apoptosis. Screening of a glycan array demonstrated GalNAcβ1-4(Fucα1-3)GlcNAc (LDNF) as a specific Y3-binding ligand. To provide a structural basis for function, the crystal structure was solved to a resolution of 1.2 Å, revealing a single-domain αβα-sandwich motif. Two monomers were dimerized to form a large 10-stranded, antiparallel β-sheet flanked by α-helices on each side, representing a unique oligomerization mode among GBPs. A large glycan binding pocket extends into the dimeric interface, and docking of LDNF identified key residues for glycan interactions. Disruption of residues predicted to be involved in LDNF/Y3 interactions resulted in the significant loss of binding to Jurkat T-cells and severely impaired their cytotoxicity. Collectively, these results demonstrate Y3 to be a GBP with selective cytotoxicity toward human T-cell leukemia cells and indicate its potential use in cancer diagnosis and treatment.

  7. Investigating the Impact of Possession-Way of a Smartphone on Action Recognition

    Directory of Open Access Journals (Sweden)

    Zae Myung Kim

    2016-06-01

    Full Text Available For the past few decades, action recognition has been attracting many researchers due to its wide use in a variety of applications. Especially with the increasing number of smartphone users, many studies have been conducted using sensors within a smartphone. However, a lot of these studies assume that the users carry the device in specific ways such as by hand, in a pocket, in a bag, etc. This paper investigates the impact of providing an action recognition system with the information of the possession-way of a smartphone, and vice versa. The experimental dataset consists of five possession-ways (hand, backpack, upper-pocket, lower-pocket, and shoulder-bag and two actions (walking and running gathered by seven users separately. Various machine learning models including recurrent neural network architectures are employed to explore the relationship between the action recognition and the possession-way recognition. The experimental results show that the assumption of possession-ways of smartphones do affect the performance of action recognition, and vice versa. The results also reveal that a good performance is achieved when both actions and possession-ways are recognized simultaneously.

  8. Demonic possessions and mental illness: discussion of selected cases in late medieval hagiographical literature.

    Science.gov (United States)

    Espí Forcén, Carlos; Espí Forcén, Fernando

    2014-01-01

    During the Middle Ages, demonic possession constituted an explanation for an erratic behavior in society. Exorcism was the treatment generally applied to demoniacs and seems to have caused some alleviation in the suffering of mentally distressed people. We have selected and analyzed some cases of demonic possession from thirteenth-century hagiographical literature. In the description of demoniacs we have been able to find traits of psychotic, mood, neurotic, personality disorders and epilepsy. The exorcisms analyzed in our article are the result of literary invention more than the description of a contemporary event. Nevertheless, the writers were witnesses of their time, transferred their knowledge about exorcism and possession in their narrative and presumably incorporated their actual experience with demoniacs.

  9. Prepositions in Use: Prepositions of Standard, Prepositions of Possession and Prepositions of Accompaniment

    Directory of Open Access Journals (Sweden)

    Naji Masned AlQbailat

    2016-08-01

    Full Text Available The current research paper attempted at investigating the use of prepositions of standard, prepositions of possession and prepositions of accompaniment by some Jordanian learners of English. A total of 53 Jordanian English Majors participated in the study from the department of English language at Princess Alia University College. In collecting the needed data for the purpose of the study, the researchers employed fifteen items of a multiple choice test. The results of the study showed that Jordanian learners of English encountered moderate difficulty in learning the three aforesaid usages of prepositions. This difficulty is ascribed mainly to first language interference more than intralingual interference. It was also found that prepositions of standard are the most difficult to learn by the participants, followed by prepositions of accompaniment and prepositions of possession respectively.       Keywords: First language Interference, Intralingual Interference, Prepositions of Standard, Prepositions of Accompaniment, Prepositions of Possession

  10. Does possession of assets increase women's participation in reproductive decision-making? Perceptions of Nigerian women.

    Science.gov (United States)

    Omeje, Joachim C; Oshi, Sarah N; Oshi, Daniel C

    2011-01-01

    This study is based on a population-based, descriptive questionnaire survey, the objective of which was to elicit the perceptions of women in south-eastern Nigeria on whether possession of economic/household assets by women enhanced their capacity to negotiate reproductive issues with their husbands. The findings show that the respondents believed that possession of economic/household assets by women in their communities might not necessarily increase their negotiation power in their reproductive decision-making. Other factors tend to attenuate the effects of women's possession of economic/household assets on their reproductive bargaining power. Notable among these may be social norms that implicitly arrogate control of the assets owned by the conjugal couple to the man, even when they are bought by the women. Planners of reproductive health intervention projects, policy-makers and researchers need to be aware of such sociocultural specific phenomena, which do not fit with widely held international beliefs.

  11. 27 CFR 19.343 - Addition of oak chips to spirits and addition of caramel to brandy and rum.

    Science.gov (United States)

    2010-04-01

    ... spirits and addition of caramel to brandy and rum. 19.343 Section 19.343 Alcohol, Tobacco Products and... PLANTS Storage § 19.343 Addition of oak chips to spirits and addition of caramel to brandy and rum. Oak... records. Caramel possessing no material sweetening properties may be added to rum or brandy in packages or...

  12. 27 CFR 19.318 - Addition of caramel to rum or brandy and addition of oak chips to spirits.

    Science.gov (United States)

    2010-04-01

    ... or brandy and addition of oak chips to spirits. 19.318 Section 19.318 Alcohol, Tobacco Products and... PLANTS Production § 19.318 Addition of caramel to rum or brandy and addition of oak chips to spirits. Caramel possessing no material sweetening properties may be added to rum or brandy on bonded premises...

  13. Rulings in Argentinean and Colombian courts decriminalize possession of small amounts of narcotics.

    Science.gov (United States)

    Cozac, David

    2009-12-01

    Two recent court decisions in South America have reflected a growing backlash in the region against the so-called, U.S.-led "war on drugs". In Argentina, the Supreme Court of Justice ruled unanimously on 25 August 2009 that the second paragraph of Article 14 of the country's drug control legislation, which punishes the possession of drugs for personal consumption, was unconstitutional. In Colombia, the Supreme Court of Justice ruled on 8 July 2009 that the possession of illegal drugs for personal use was not a criminal offence.

  14. An extreme-halophile archaebacterium possesses the interlock type of prephenate dehydratase characteristic of the Gram-positive eubacteria

    Science.gov (United States)

    Jensen, R. A.; d'Amato, T. A.; Hochstein, L. I.

    1988-01-01

    The focal point of phenylalanine biosynthesis is a dehydratase reaction which in different organisms may be prephenate dehydratase, arogenate dehydratase, or cyclohexadienyl dehydratase. Gram-positive, Gram-negative, and cyanobacterial divisions of the eubacterial kingdom exhibit different dehydratase patterns. A new extreme-halophile isolate, which grows on defined medium and is tentatively designated as Halobacterium vallismortis CH-1, possesses the interlock type of prephenate dehydratase present in Gram-positive bacteria. In addition to the conventional sensitivity to feedback inhibition by L-phenylalanine, the phenomenon of metabolic interlock was exemplified by the sensitivity of prephenate dehydratase to allosteric effects produced by extra-pathway (remote) effectors. Thus, L-tryptophan inhibited activity while L-tyrosine, L-methionine, L-leucine and L-isoleucine activated the enzyme. L-Isoleucine and L-phenylalanine were effective at micromolar levels; other effectors operated at mM levels. A regulatory mutant selected for resistance to growth inhibition caused by beta-2-thienylalanine possessed an altered prephenate dehydratase in which a phenomenon of disproportionately low activity at low enzyme concentration was abolished. Inhibition by L-tryptophan was also lost, and activation by allosteric activators was diminished. Not only was sensitivity to feedback inhibition by L-phenylalanine lost, but the mutant enzyme was now activated by this amino acid (a mutation type previously observed in Bacillus subtilis). It remains to be seen whether this type of prephenate dehydratase will prove to be characteristic of all archaebacteria or of some archaebacterial subgroup cluster.

  15. Effects of Offense, Defense, and Ball Possession on Mobility Performance in Wheelchair Basketball

    NARCIS (Netherlands)

    de Witte, Annemarie M. H.; Berger, Monique A. M.; Hoozemans, Marco J. M.; Veeger, Dirkjan H. E. J.; van der Woude, Lucas H. V.

    2017-01-01

    The aim of this study was to determine to what extent mobility performance is influenced by offensive or defensive situations and ball possession and to what extent these actions are different for the field positions. From video analysis, the relative duration of the various wheelchair movements

  16. What does it mean to be possessed by a spirit or demon? Some ...

    African Journals Online (AJOL)

    2015-07-08

    Jul 8, 2015 ... Commons Attribution. License. .... Klass (2003:3) I therefore want to ask the question: 'What is actually .... help to categorise possession in terms of possible causal ... control of life. .... a social structure, the complex formed by all his [her] social ... a way to cope with stressful experiences and, together with.

  17. Competences possessed and required by European graduates. REFLEX Report to HEFCE No 4

    OpenAIRE

    Little, Brenda; Braun, Edith; Tang, Win-Yee

    2008-01-01

    The report is based on the results of a major international study of graduate employment some five years after graduation. It presents an analysis of graduates' perceptions of what competences they need to do their current jobs and whether they possess these competences.

  18. 31 CFR 601.5 - Penalty for unauthorized control or possession.

    Science.gov (United States)

    2010-07-01

    ... CURRENCY AND OTHER SECURITIES § 601.5 Penalty for unauthorized control or possession. The Secretary of the... heretofore adopted for the printing of paper currency or other obligations or securities of the United States, is and will be subject to the provisions of 18 U.S.C. 474A which provides, in part, that it is...

  19. 7 CFR 330.300 - Soil from foreign countries or Territories or possessions. 1

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Soil from foreign countries or Territories or possessions. 1 330.300 Section 330.300 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE FEDERAL PLANT PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY...

  20. What does it mean to be possessed by a spirit or demon? Some ...

    African Journals Online (AJOL)

    The visible growth in possession and exorcism in Southern Africa can, amongst others, be attributed to the general impression in Christianity that, since Jesus was a successful exorcist, his followers should follow his example. Historical Jesus research generally endorses a view of Jesus as exorcist, which probably also ...

  1. 50 CFR 648.322 - Skate allocation, possession, and landing provisions.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Skate allocation, possession, and landing provisions. 648.322 Section 648.322 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE FISHERIES OF THE NORTHEASTERN UNITED STATES Management Measures for the NE Skate...

  2. 27 CFR 479.105 - Transfer and possession of machine guns.

    Science.gov (United States)

    2010-04-01

    ... a department, agency, or political subdivision thereof; or any lawful transfer or lawful possession... distribution to any department or agency of the United States or any State or political subdivision thereof, or... entities expressing a need for a particular model or interest in seeing a demonstration of a particular...

  3. Logarithmic residues of analytic Banach algebra valued functions possessing a simply meromorphic inverse

    NARCIS (Netherlands)

    H. Bart (Harm); T. Ehrhardt; B. Silbermann

    2001-01-01

    textabstractA logarithmic residue is a contour integral of a logarithmic derivative (left or right) of an analytic Banach algebra valued function. For functions possessing a meromorphic inverse with simple poles only, the logarithmic residues are identified as the sums of idempotents. With the help

  4. Possession, Transportation, and Use of Firearms by Older Youth in 4-H Shooting Sports Programs

    Science.gov (United States)

    White, David J.; Williver, S. Todd

    2014-01-01

    Thirty years ago we would think nothing of driving to school with a jackknife in our pocket or rifle in the gun rack. Since then, the practices of possessing, transporting, and using firearms have been limited by laws, rules, and public perception. Despite restrictions on youth, the Youth Handgun Safety Act does afford 4-H shooting sports members…

  5. THE RELATIONSHIP BETWEEN RESEARCH AND TEACHING: THE CHART OF POSSESSIVE PRONOUNS IN PORTUGUESE

    Directory of Open Access Journals (Sweden)

    Leonardo Lennertz Marcotulio

    2016-01-01

    Full Text Available The aim of this article is to investigate the relationship between research and teaching, concerning the rearrangements operated in the chart of possessive pronouns,  observing in which way sociolinguistic studies have been applied to the teaching of Portuguese through the didactic material prepared for High School and the courses of Portuguese as a Foreign Language.

  6. Effects of offense, defense, and ball possession on mobility performance in wheelchair basketball

    NARCIS (Netherlands)

    De Witte, Annemarie M.H.; Berger, Monique A.M.; Hoozemans, Marco J.M.; Veeger, H.E.J.; van der Woude, Lucas H.V.

    2017-01-01

    The aim of this study was to determine to what extent mobility performance is influenced by offensive or defensive situations and ball possession and to what extent these actions are different for the field positions. From video analysis, the relative duration of the various wheelchair movements

  7. How Risky Is Marijuana Possession? Considering the Role of Age, Race, and Gender

    Science.gov (United States)

    Nguyen, Holly; Reuter, Peter

    2012-01-01

    Arrest rates per capita for possession of marijuana have increased threefold over the last 20 years and now constitute the largest single arrest offense category. Despite the increase in arrest numbers, rates of use have remained stable during much of the same period. This article presents the first estimates of the arrest probabilities for…

  8. 27 CFR 478.40 - Manufacture, transfer, and possession of semiautomatic assault weapons.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Manufacture, transfer, and... COMMERCE IN FIREARMS AND AMMUNITION Administrative and Miscellaneous Provisions § 478.40 Manufacture, transfer, and possession of semiautomatic assault weapons. (a) Prohibition. No person shall manufacture...

  9. SfDredd, a Novel Initiator Caspase Possessing Activity on Effector Caspase Substrates in Spodoptera frugiperda.

    Science.gov (United States)

    Yang, Zhouning; Zhou, Ke; Liu, Hao; Wu, Andong; Mei, Long; Liu, Qingzhen

    2016-01-01

    Sf9, a cell line derived from Spodoptera frugiperda, is an ideal model organism for studying insect apoptosis. The first notable study that attempted to identify the apoptotic pathway in Sf9 was performed in 1997 and included the discovery of Sf-caspase-1, an effector caspase of Sf9. However, it was not until 2013 that the first initiator caspase in Sf9, SfDronc, was discovered, and the apoptotic pathway in Sf9 became clearer. In this study, we report another caspase of Sf9, SfDredd. SfDredd is highly similar to insect initiator caspase Dredd homologs. Experimentally, recombinant SfDredd underwent autocleavage and exhibited different efficiencies in cleavage of synthetic caspase substrates. This was attributed to its caspase activity for the predicted active site mutation blocked the above autocleavage and synthetic caspase substrates cleavage activity. SfDredd was capable of not only cleaving Sf-caspase-1 in vitro but also cleaving Sf-caspase-1 and inducing apoptosis when it was co-expressed with Sf-caspase-1 in Sf9 cells. The protein level of SfDredd was increased when Sf9 cells were treated by Actinomycin D, whereas silencing of SfDredd reduced apoptosis and Sf-caspase-1 cleavage induced by Actinomycin D treatment. These results clearly indicate that SfDredd functioned as an apoptotic initiator caspase. Apoptosis induced in Sf9 cells by overexpression of SfDredd alone was not as obvious as that induced by SfDronc alone, and the cleavage sites of Sf-caspase-1 for SfDredd and SfDronc are different. In addition, despite sharing a sequence homology with initiator caspases and possessing weak activity on initiator caspase substrates, SfDredd showed strong activity on effector caspase substrates, making it the only insect caspase reported so far functioning similar to human caspase-2 in this aspect. We believe that the discovery of SfDredd, and its different properties from SfDronc, will improve the understanding of apoptosis pathway in Sf9 cells.

  10. Whose name is it anyway? Varying patterns of possessive usage in eponymous neurodegenerative diseases

    Directory of Open Access Journals (Sweden)

    Michael R. MacAskill

    2013-04-01

    Full Text Available There has been long-standing debate over whether use of the possessive form of the names of eponymous neurological disorders should be abandoned. Which view has actually predominated in practice? We empirically assessed current and historical usage in the scientific literature. The PubMed database was queried for the percentage of titles published each year from 1960–2012 which contained the possessive form of Parkinson’s (PD, Alzheimer’s (AD, Huntington’s (HD, Wilson’s (WD, and Gaucher’s (GD diseases (e.g. Huntington’s disease or chorea vs Huntington disease or chorea. Down syndrome (DS, well known for its changes in terminology, was used as a reference. The possessive form was nearly universal in all conditions from 1960 until the early 1970s. In both DS and GD it then declined at an approximately constant rate of 2 percentage points per year to drop below 15%. The possessive forms of both PD and AD began to decline at the same time but stabilised and have since remained above 80%, with a similar but more volatile pattern in HD. WD, meanwhile, is intermediate between the DS/GD and PD/AD/HD patterns, with a slower decline to its current value of approximately 60%. Declining possessive form usage in GD and DS papers has been remarkably uniform over time and has nearly reached completion. PD and AD appear stable in remaining predominantly possessive. The larger volume of papers published in those fields and their possibly greater public recognition and involvement may make that unlikely to change in the short-term. In a secondary analysis restricted to PD, we found that practices have switched dramatically several times in each of three US-published general neurology journals. Meanwhile, in two UK-published journals, and in the specialist title “Movement Disorders”, the possessive form has been maintained consistently. The use of eponyms in neurology shows systematic variation across time, disorders, and journals.

  11. Relationship between length of A-bomb survivor's health handbook possession and mortality risk

    International Nuclear Information System (INIS)

    Otani, Keiko; Ohtaki, Megu; Satoh, Kenichi; Tonda, Tetsuji

    2012-01-01

    The title handbook was first issued to support the health of A-bomb survivors by Japan MHLW in 1957, and about 220 thousands possess it in 2010. Its major supports contain free medicare, 2 periodic and 2 optional medical examinations/year and other various benefits. This study was performed to elucidate the relationship in the title for evaluation of its life prolonging effect on Hiroshima survivors. The length of handbook possession was defined the period from acquiring it to death. The cohort was 17,335 (7,607 men) registered survivors who had had the handbook for 1 year or more, and before Nov. 1965 or later, until Dec. 2010. Causes of death event were classified to be the cerebrovascular, cardiac and cancerous disease, and others were censored. The objective variable was mortality risk, and predictors were the exposed dose, age at the exposure, chronological age and length of handbook possession. Risk of cerebrovascular or cardiac death was estimated by the model of exponential function, and of cancer death, of power function based on multi-stage theory of carcinogenesis. Results revealed that the cerebrovascular mortality of women and men was 8.1 and 7.2%, respectively; cardiac, 8.7 and 7.2%; and cancerous, 10.1 and 14.9%. Significant reduction of relative risk of cerebrovascular death, about 4% per 1 year handbook possession, was observed in men alone; negative correlations of period effect were seen in cerebrovascular and cardiac death of women; and positive correlation between cancer death and exposed dose was observed. The prophylaxis and continuous treatment of cerebrovascular disease due to the handbook possession were thought effective in men. (T.T.)

  12. The effect of playing tactics and situational variables on achieving score-box possessions in a professional soccer team.

    Science.gov (United States)

    Lago-Ballesteros, Joaquin; Lago-Peñas, Carlos; Rey, Ezequiel

    2012-01-01

    The aim of this study was to analyse the influence of playing tactics, opponent interaction and situational variables on achieving score-box possessions in professional soccer. The sample was constituted by 908 possessions obtained by a team from the Spanish soccer league in 12 matches played during the 2009-2010 season. Multidimensional qualitative data obtained from 12 ordered categorical variables were used. Sampled matches were registered by the AMISCO PRO system. Data were analysed using chi-square analysis and multiple logistic regression analysis. Of 908 possessions, 303 (33.4%) produced score-box possessions, 477 (52.5%) achieved progression and 128 (14.1%) failed to reach any sort of progression. Multiple logistic regression showed that, for the main variable "team possession type", direct attacks and counterattacks were three times more effective than elaborate attacks for producing a score-box possession (P tactics on producing score-box possessions.

  13. [A nosology for supernatural phenomena and the construction of the 'possessed' brain in the nineteenth century].

    Science.gov (United States)

    Goncalves, Valeria Portugal; Ortega, Francisco

    2013-06-01

    At the end of the twentieth century, supernatural phenomena such as so called trances and possession by spirits received a scientific classification, which includes the numerous diagnoses of the dominant psychiatry. At the end of the nineteenth century we can observe a process of scientific categorization of phenomena considered to have originated in superstition or popular imagination. In this work we show how trances and spiritual possession were studied by Franz Anton Mesmer and his followers when developing the concept of magnetism; by James Braid during the creation of his theory of hypnosis; and by Jean Martin Charcot, which marked the entry of hysteria into nosological classification. Despite the differences between these schools, we identify the use of the brain and cerebral metaphors as the foundation of theories of the mind.

  14. Tourette's syndrome: from demonic possession and psychoanalysis to the discovery of gene

    Directory of Open Access Journals (Sweden)

    Francisco M.B. Germiniani

    2012-07-01

    Full Text Available In this paper we make a brief historical review of the hypothesis concerning the etiology of Tourette's syndrome (TS, focusing on varying trends over time: at first, its presumed relation to witchcraft and demonic possessions, followed by the psychoanalytical theory, which attributed TS to a masturbatory equivalent. Then, progressing to modern time, to the immunological theory and finally the advent of genetics and their role in the etiology of TS.

  15. Logarithmic residues of analytic Banach algebra valued functions possessing a simply meromorphic inverse

    OpenAIRE

    Bart, Harm; Ehrhardt, T.; Silbermann, B.

    2001-01-01

    textabstractA logarithmic residue is a contour integral of a logarithmic derivative (left or right) of an analytic Banach algebra valued function. For functions possessing a meromorphic inverse with simple poles only, the logarithmic residues are identified as the sums of idempotents. With the help of this observation, the issue of left versus right logarithmic residues is investigated, both for connected and nonconnected underlying Cauchy domains. Examples are given to elucidate the subject ...

  16. A mosaic adenovirus possessing serotype Ad5 and serotype Ad3 knobs exhibits expanded tropism

    International Nuclear Information System (INIS)

    Takayama, Koichi; Reynolds, Paul N.; Short, Joshua J.; Kawakami, Yosuke; Adachi, Yasuo; Glasgow, Joel N.; Rots, Marianne G.; Krasnykh, Victor; Douglas, Joanne T.; Curiel, David T.

    2003-01-01

    The efficiency of cancer gene therapy with recombinant adenoviruses based on serotype 5 (Ad5) has been limited partly because of variable, and often low, expression by human primary cancer cells of the primary cellular-receptor which recognizes the knob domain of the fiber protein, the coxsackie and adenovirus receptor (CAR). As a means of circumventing CAR deficiency, Ad vectors have been retargeted by utilizing chimeric fibers possessing knob domains of alternate Ad serotypes. We have reported that ovarian cancer cells possess a primary receptor for Ad3 to which the Ad3 knob binds independently of the CAR-Ad5 knob interaction. Furthermore, an Ad5-based chimeric vector, designated Ad5/3, containing a chimeric fiber proteins possessing the Ad3 knob, demonstrates CAR-independent tropism by virtue of targeting the Ad3 receptor. Based on these findings, we hypothesized that a mosaic virus possessing both the Ad5 knob and the Ad3 knob on the same virion could utilize either primary receptor, resulting in expanded tropism. In this study, we generated a dual-knob mosaic virus by coinfection of 293 cells with Ad5-based and Ad5/3-based vectors. Characterization of the resultant virions confirmed the incorporation of both Ad5 and Ad3 knobs in the same particle. Furthermore, this mosaic virus was able to utilize either receptor, CAR and the Ad3 receptor, for virus attachment to cells. Enhanced Ad infectivity with the mosaic virus was shown in a panel of cell lines, with receptor profiles ranging from CAR-dominant to Ad3 receptor-dominant. Thus, this mosaic virus strategy may offer the potential to improve Ad-based gene therapy approaches by infectivity enhancement and tropism expansion

  17. Provable Data Possession of Resource-constrained Mobile Devices in Cloud Computing

    OpenAIRE

    Jian Yang; Haihang Wang; Jian Wang; Chengxiang Tan; Dingguo Yu

    2011-01-01

    Benefited from cloud storage services, users can save their cost of buying expensive storage and application servers, as well as deploying and maintaining applications. Meanwhile they lost the physical control of their data. So effective methods are needed to verify the correctness of the data stored at cloud servers, which are the research issues the Provable Data Possession (PDP) faced. The most important features in PDP are: 1) supporting for public, unlimited numbers of times of verificat...

  18. Prepositions in Use: Prepositions of Standard, Prepositions of Possession and Prepositions of Accompaniment

    OpenAIRE

    Naji Masned AlQbailat; Islam M. Al-Momani; Yazan Shaker Almahameed

    2016-01-01

    The current research paper attempted at investigating the use of prepositions of standard, prepositions of possession and prepositions of accompaniment by some Jordanian learners of English. A total of 53 Jordanian English Majors participated in the study from the department of English language at Princess Alia University College. In collecting the needed data for the purpose of the study, the researchers employed fifteen items of a multiple choice test. The results of the study showed that J...

  19. The investigation of crimes refering to forgery of documents and possession of forged documents

    OpenAIRE

    Kotovienė, Danutė

    2011-01-01

    THE INVESTIGATION OF CRIMES REFERING TO FORGERY OF DOCUMENTS AND POSSESSION OF FORGED DOCUMENTS Constantly improving informational technologies more and more get into our daily routine: nowadays it is widely spread internet payments, purchases, signing on-line agreements using electronic signatures. However, paper documents or other made of appropriate materials, which have material evidence, still have a very significant impact on our life. Its convey different aspects of states’ public work...

  20. Mechanics of additively manufactured biomaterials.

    Science.gov (United States)

    Zadpoor, Amir A

    2017-06-01

    Additive manufacturing (3D printing) has found many applications in healthcare including fabrication of biomaterials as well as bioprinting of tissues and organs. Additively manufactured (AM) biomaterials may possess arbitrarily complex micro-architectures that give rise to novel mechanical, physical, and biological properties. The mechanical behavior of such porous biomaterials including their quasi-static mechanical properties and fatigue resistance is not yet well understood. It is particularly important to understand the relationship between the designed micro-architecture (topology) and the resulting mechanical properties. The current special issue is dedicated to understanding the mechanical behavior of AM biomaterials. Although various types of AM biomaterials are represented in the special issue, the primary focus is on AM porous metallic biomaterials. As a prelude to this special issue, this editorial reviews some of the latest findings in the mechanical behavior of AM porous metallic biomaterials so as to describe the current state-of-the-art and set the stage for the other studies appearing in the issue. Some areas that are important for future research are also briefly mentioned. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. The Humanitarian Bailment of Foreign Possessed Territories: A Proactive Method of Legal Analysis

    Science.gov (United States)

    1996-04-01

    entrusts an employee with the employer’s lawn mower to mow the employer’s lawn .220 This is analogous to the permissive entry situation where a host...accompanying text. 82 If an employee feloniously takes the lawn mower from the employer’s place of business to the employee’s house the servant has...committed larceny because the employee never had 230possession of the mower, only custody. If the employee picked up the lawn mower from the repair

  2. Optimal Scheduling of Railway Track Possessions in Large-Scale Projects with Multiple Construction Works

    DEFF Research Database (Denmark)

    Li, Rui; Roberti, Roberto

    2017-01-01

    satisfying different operational constraints and minimizing the total construction cost. To find an optimal solution of the RTPSP, this paper proposes an approach that, first, transfers the nominal market prices into track-possession-based real prices, and then generates a schedule of the construction works...... by solving a mixed-integer linear-programming model for the given track blocking proposal. The proposed approach is tested on a real-life case study from the Danish railway infrastructure manager. The results show that, in 2 h of computing time, the approach is able to provide solutions that are within 0...

  3. Power, slavery, and spirit possession in East Africa: A few reflections

    Directory of Open Access Journals (Sweden)

    Beatrice Nicolini

    2014-02-01

    Full Text Available Spirit possession and its relationship with power aims to offer here a better understanding not only of East African societies, but, most of all, of their historical role in numerous political and military conflicts and also within peace-building processes that represent a continuation of a topic of longstanding concern in East African history. The relationships between religions, local cultures and institutional powers throughout contemporary East African history will be re-read through regional and transnational, as well as international dynamics.

  4. The Lived Space: Possession, Ownership, and Land Sales on the Chilean Frontier (Valdivia, 1790-1830

    Directory of Open Access Journals (Sweden)

    Manuel Bastias Saavedra

    2018-01-01

    Full Text Available By looking into sales of indigenous land in the territory of Valdivia between 1790 and 1830, this article discusses how legal interactions were tied to the local spaces of rural habitation. Since ownership was linked with possession and use in Spanish colonial law, local social relations and shared local knowledge were crucial for determining legal ownership and ensuring the validity of land transfers. This article provides insights into how law operated in newly integrated colonial spaces, and reveals that land transfers did not yet constitute purely contractual relations but were instead socially negotiated transactions involving different levels of authority and dependency.

  5. Assessment of Management Competencies Possessed by Postgraduate University Business Education Students to Handle Entrepreneurship Business Challenges in Nigeria

    Science.gov (United States)

    Okoro, James

    2015-01-01

    University Business Education graduates, by the nature of their programme, ought to possess relevant management competencies for successful entrepreneurship but casual observation and empirical reports indicate that they are not doing well in this aspect. Therefore, this study assessed the management competencies possessed by the university…

  6. 75 FR 58993 - Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for Certain Migratory Game Birds

    Science.gov (United States)

    2010-09-24

    ... Part V Department of the Interior Fish and Wildlife Service 50 CFR Part 20 Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for Certain Migratory Game Birds; Final Rule #0;#0;Federal...-1231-9BPP-L2] RIN 1018-AX06 Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for...

  7. 26 CFR 1.937-3 - Income effectively connected with the conduct of a trade or business in a possession.

    Science.gov (United States)

    2010-04-01

    ... operates an active financing business from offices in, Possession I. Interests in G are owned by D, a bona... of a trade or business in a possession. 1.937-3 Section 1.937-3 Internal Revenue INTERNAL REVENUE... United States § 1.937-3 Income effectively connected with the conduct of a trade or business in a...

  8. Assessment of Accounting Competencies Possessed by Postgraduate University Business Education Students to Handle Entrepreneurship Business Challenges in Nigeria

    Science.gov (United States)

    Okoro, James

    2014-01-01

    University Business Education graduates, by the nature of their programme, ought to possess relevant accounting competencies for successful entrepreneurship but casual observation and empirical reports indicate that they are not doing well in this aspect. Therefore, this study assessed the accounting competencies possessed by university…

  9. Hierarchical remote data possession checking method based on massive cloud files

    Directory of Open Access Journals (Sweden)

    Ma Haifeng

    2017-06-01

    Full Text Available Cloud storage service enables users to migrate their data and applications to the cloud, which saves the local data maintenance and brings great convenience to the users. But in cloud storage, the storage servers may not be fully trustworthy. How to verify the integrity of cloud data with lower overhead for users has become an increasingly concerned problem. Many remote data integrity protection methods have been proposed, but these methods authenticated cloud files one by one when verifying multiple files. Therefore, the computation and communication overhead are still high. Aiming at this problem, a hierarchical remote data possession checking (hierarchical-remote data possession checking (H-RDPC method is proposed, which can provide efficient and secure remote data integrity protection and can support dynamic data operations. This paper gives the algorithm descriptions, security, and false negative rate analysis of H-RDPC. The security analysis and experimental performance evaluation results show that the proposed H-RDPC is efficient and reliable in verifying massive cloud files, and it has 32–81% improvement in performance compared with RDPC.

  10. Resolution No. 96/03 About possession of ionic smoke detectors

    International Nuclear Information System (INIS)

    2004-01-01

    The resolution states that: first: all the entities of the country having Ionic smoke detectors in use are to be communicated to the National Center for Nuclear safety in correspondence with the format that is shown in the annex to the present. This formation must be updated every three years. Second: Entities possessing Ionic smoke detectors in use, must be corresponding management as radioactive waste of such detectors in the term of one year from the entry into force of this resolution with the center of protection and of radiation hygiene purposes ensure safe and proper management as radioactive material into disuse. Third: Importing entities, distributors, and that made the Assembly of ionic smoke detectors, continue to be governed by the provisions of the resolution No.. 25/98 of this Ministry, R ules for the authorization of practices associated the employment of las radiation ionizing . Fourth: Entities in which ionic smoke detectors are installed must complete information according to the annex to the present format and send it to the National Center for Nuclear safety within a period of 30 days from the installation of such detectors. Fifth: Entities that possess Ionic smoke detectors and decide to continue using them should not be the evacuation of the same with the center of protection and hygiene of radiation, for the purpose of ensuring a safe and proper management as radioactive material in disuse, notifying this Act to the National Center for Nuclear safety.

  11. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  12. [Food additives and healthiness].

    Science.gov (United States)

    Heinonen, Marina

    2014-01-01

    Additives are used for improving food structure or preventing its spoilage, for example. Many substances used as additives are also naturally present in food. The safety of additives is evaluated according to commonly agreed principles. If high concentrations of an additive cause adverse health effects for humans, a limit of acceptable daily intake (ADI) is set for it. An additive is a risk only when ADI is exceeded. The healthiness of food is measured on the basis of nutrient density and scientifically proven effects.

  13. Photonic crystals possessing multiple Weyl points and the experimental observation of robust surface states

    Science.gov (United States)

    Chen, Wen-Jie; Xiao, Meng; Chan, C. T.

    2016-01-01

    Weyl points, as monopoles of Berry curvature in momentum space, have captured much attention recently in various branches of physics. Realizing topological materials that exhibit such nodal points is challenging and indeed, Weyl points have been found experimentally in transition metal arsenide and phosphide and gyroid photonic crystal whose structure is complex. If realizing even the simplest type of single Weyl nodes with a topological charge of 1 is difficult, then making a real crystal carrying higher topological charges may seem more challenging. Here we design, and fabricate using planar fabrication technology, a photonic crystal possessing single Weyl points (including type-II nodes) and multiple Weyl points with topological charges of 2 and 3. We characterize this photonic crystal and find nontrivial 2D bulk band gaps for a fixed kz and the associated surface modes. The robustness of these surface states against kz-preserving scattering is experimentally observed for the first time. PMID:27703140

  14. Novel Imidazopyridine Derivatives Possess Anti-Tumor Effect on Human Castration-Resistant Prostate Cancer Cells.

    Directory of Open Access Journals (Sweden)

    Matthew A Ingersoll

    Full Text Available Prostate cancer (PCa is the second leading cause of cancer-related death afflicting United States males. Most treatments to-date for metastatic PCa include androgen-deprivation therapy and second-generation anti-androgens such as abiraterone acetate and enzalutamide. However, a majority of patients eventually develop resistance to these therapies and relapse into the lethal, castration-resistant form of PCa to which no adequate treatment option remains. Hence, there is an immediate need to develop effective therapeutic agents toward this patient population. Imidazopyridines have recently been shown to possess Akt kinase inhibitory activity; thus in this study, we investigated the inhibitory effect of novel imidazopyridine derivatives HIMP, M-MeI, OMP, and EtOP on different human castration-resistant PCa cells. Among these compounds, HIMP and M-MeI were found to possess selective dose- and time-dependent growth inhibition: they reduced castration-resistant PCa cell proliferation and spared benign prostate epithelial cells. Using LNCaP C-81 cells as the model system, these compounds also reduced colony formation as well as cell adhesion and migration, and M-MeI was the most potent in all studies. Further investigation revealed that while HIMP primarily inhibits PCa cell growth via suppression of PI3K/Akt signaling pathway, M-MeI can inhibit both PI3K/Akt and androgen receptor pathways and arrest cell growth in the G2 phase. Thus, our results indicate the novel compound M-MeI to be a promising candidate for castration-resistant PCa therapy, and future studies investigating the mechanism of imidazopyridine inhibition may aid to the development of effective anti-PCa agents.

  15. Novel Imidazopyridine Derivatives Possess Anti-Tumor Effect on Human Castration-Resistant Prostate Cancer Cells.

    Science.gov (United States)

    Ingersoll, Matthew A; Lyons, Anastesia S; Muniyan, Sakthivel; D'Cunha, Napoleon; Robinson, Tashika; Hoelting, Kyle; Dwyer, Jennifer G; Bu, Xiu R; Batra, Surinder K; Lin, Ming-Fong

    2015-01-01

    Prostate cancer (PCa) is the second leading cause of cancer-related death afflicting United States males. Most treatments to-date for metastatic PCa include androgen-deprivation therapy and second-generation anti-androgens such as abiraterone acetate and enzalutamide. However, a majority of patients eventually develop resistance to these therapies and relapse into the lethal, castration-resistant form of PCa to which no adequate treatment option remains. Hence, there is an immediate need to develop effective therapeutic agents toward this patient population. Imidazopyridines have recently been shown to possess Akt kinase inhibitory activity; thus in this study, we investigated the inhibitory effect of novel imidazopyridine derivatives HIMP, M-MeI, OMP, and EtOP on different human castration-resistant PCa cells. Among these compounds, HIMP and M-MeI were found to possess selective dose- and time-dependent growth inhibition: they reduced castration-resistant PCa cell proliferation and spared benign prostate epithelial cells. Using LNCaP C-81 cells as the model system, these compounds also reduced colony formation as well as cell adhesion and migration, and M-MeI was the most potent in all studies. Further investigation revealed that while HIMP primarily inhibits PCa cell growth via suppression of PI3K/Akt signaling pathway, M-MeI can inhibit both PI3K/Akt and androgen receptor pathways and arrest cell growth in the G2 phase. Thus, our results indicate the novel compound M-MeI to be a promising candidate for castration-resistant PCa therapy, and future studies investigating the mechanism of imidazopyridine inhibition may aid to the development of effective anti-PCa agents.

  16. Association between socio-economic status and childhood undernutrition in Bangladesh; a comparison of possession score and poverty index.

    Science.gov (United States)

    Mohsena, Masuda; Mascie-Taylor, C G Nicholas; Goto, Rie

    2010-10-01

    To determine how much of the variation in nutritional status of Bangladeshi children under 5 years old can be attributed to the socio-economic status of the family. Nutritional status used reference Z-scores of weight-for-age (WAZ), height-for-age (HAZ) and weight-for-height (WHZ). A 'possession score' was generated based on ownership of a radio, television, bicycle, motorcycle and telephone, and the availability of electricity, with categories of 0 to 4+ possessions. A five-point (quintile) 'poverty index' was created using principal component analysis. The Bangladesh Demographic and Health Survey 2004 was the source of data. A sample of 4891 children aged <5 years was obtained. Some 57.8 % of the sample was either stunted, wasted or underweight (7.7 % were stunted, wasted and underweight). Of those stunted (48.4 %), 25.7 % were also underweight. Underweight and wasting prevalences were 40.7 % and 14.3 %, respectively. Mean WAZ, HAZ and WHZ did not differ by sex. Children of mothers with no education or no possessions were, on average, about 1 sd more underweight and stunted than those with higher educated mothers or with 4+ possessions. The possession score provided much greater discrimination of undernutrition than the poverty index. Nearly 50 % of children from households with no possessions were stunted, wasted or underweight (only 27 % in the poorest quintile), compared with only 3-6 % of children from households with 4+ possessions (over 13 % in the richest quintile). Maternal education and possession score were the main predictors of a child's nutritional status. Possession score was a much better indicator of undernutrition than the poverty index.

  17. Additives in yoghurt production

    Directory of Open Access Journals (Sweden)

    Milna Tudor

    2008-02-01

    Full Text Available In yoghurt production, mainly because of sensory characteristics, different types of additives are used. Each group, and also each substance from the same group has different characteristics and properties. For that reason, for improvement of yoghurt sensory characteristics apart from addition selection, the quantity of the additive is very important. The same substance added in optimal amount improves yoghurt sensory attributes, but too small or too big addition can reduce yoghurt sensory attributes. In this paper, characteristics and properties of mostly used additives in yoghurt production are described; skimmed milk powder, whey powder, concentrated whey powder, sugars and artificial sweeteners, fruits, stabilizers, casein powder, inulin and vitamins. Also the impact of each additive on sensory and physical properties of yoghurt, syneresis and viscosity, are described, depending on used amount added in yoghurt production.

  18. Review: Lisa Mackenrodt, Swahili Spirit Possession and Islamic Healing in Contemporary Tanzania: The Jinn Fly on Friday (2011 Buchbesprechung: Lisa Mackenrodt, Swahili Spirit Possession and Islamic Healing in Contemporary Tanzania: The Jinn Fly on Friday (2011

    Directory of Open Access Journals (Sweden)

    Jigal Beez

    2013-01-01

    Full Text Available Review of the monograph:Lisa Mackenrodt, Swahili Spirit Possession and Islamic Healing in Contemporary Tanzania: The Jinn Fly on Friday, Hamburg: Verlag Dr. Kovač, 2011, ISBN 978-3-8300-5806-9, 216 pagesBesprechung der Monographie:Lisa Mackenrodt, Swahili Spirit Possession and Islamic Healing in Contemporary Tanzania: The Jinn Fly on Friday, Hamburg: Verlag Dr. Kovač, 2011, ISBN 978-3-8300-5806-9, 216 Seiten

  19. Polylactides in additive biomanufacturing.

    Science.gov (United States)

    Poh, Patrina S P; Chhaya, Mohit P; Wunner, Felix M; De-Juan-Pardo, Elena M; Schilling, Arndt F; Schantz, Jan-Thorsten; van Griensven, Martijn; Hutmacher, Dietmar W

    2016-12-15

    New advanced manufacturing technologies under the alias of additive biomanufacturing allow the design and fabrication of a range of products from pre-operative models, cutting guides and medical devices to scaffolds. The process of printing in 3 dimensions of cells, extracellular matrix (ECM) and biomaterials (bioinks, powders, etc.) to generate in vitro and/or in vivo tissue analogue structures has been termed bioprinting. To further advance in additive biomanufacturing, there are many aspects that we can learn from the wider additive manufacturing (AM) industry, which have progressed tremendously since its introduction into the manufacturing sector. First, this review gives an overview of additive manufacturing and both industry and academia efforts in addressing specific challenges in the AM technologies to drive toward AM-enabled industrial revolution. After which, considerations of poly(lactides) as a biomaterial in additive biomanufacturing are discussed. Challenges in wider additive biomanufacturing field are discussed in terms of (a) biomaterials; (b) computer-aided design, engineering and manufacturing; (c) AM and additive biomanufacturing printers hardware; and (d) system integration. Finally, the outlook for additive biomanufacturing was discussed. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Dissociative trance disorder: clinical and Rorschach findings in ten persons reporting demon possession and treated by exorcism.

    Science.gov (United States)

    Ferracuti, S; Sacco, R; Lazzari, R

    1996-06-01

    Although dissociative trance disorders, especially possession disorder, are probably more common than is usually though, precise clinical data are lacking. Ten persons undergoing exorcisms for devil trance possession state were studied with the Dissociative Disorders Diagnostic Schedule and the Rorschach test. These persons had many traits in common with dissociative identity disorder patients. They were overwhelmed by paranormal experiences. Despite claiming possession by a demon, most of them managed to maintain normal social functioning. Rorschach findings showed that these persons had a complex personality organization: Some of them displayed a tendency to oversimplify stimulus perception whereas others seemed more committed to psychological complexity. Most had severe impairment of reality testing, and 6 of the participants had an extratensive coping stile. In this group of persons reporting demon possession, dissociative trance disorder seems to be a distinct clinical manifestation of a dissociative continuum, sharing some features with dissociative identity disorder.

  1. Global mental health and trauma exposure: the current evidence for the relationship between traumatic experiences and spirit possession.

    Science.gov (United States)

    Hecker, Tobias; Braitmayer, Lars; van Duijl, Marjolein

    2015-01-01

    We present a literature review on trauma exposure and spirit possession in low- and middle-income countries (LMICs). Despite the World Health Organization's objective of culturally appropriate mental health care in the Mental Health Action Plan 2013-2020, and the recommendations of the Inter-Agency Standing Committee to consider local idioms of distress and to collaborate with local resources, this topic still receives very little attention. Pathological spirit possession is commonly defined as involuntary, uncontrollable, and occurring outside of ritual settings. It is often associated with stigmatization, suffering, and dysfunctional behavior. While spirit possession has been discussed as an idiom of distress in anthropological literature, recent quantitative studies have presented support for a strong relationship between traumatic experiences and pathological possession states. The aim of this review was to investigate this relationship systematically in LMICs, in view of the debate on how to address the mental health gap in LMICs. Twenty-one articles, published in peer-reviewed English-language journals between 1994 and 2013, were identified and analyzed with regard to prevalence of possessive trance disorders, patients' sociodemographic characteristics, and its relation to traumatic experiences. The review and analysis of 917 patients with symptoms of possessive trance disorders from 14 LMICs indicated that it is a phenomenon occurring worldwide and with global relevance. This literature review suggests a strong relationship between trauma exposure and spirit possession with high prevalence rates found especially in postwar areas in African countries. More attention for possessive trance disorders in mental health and psychosocial intervention programs in humanitarian emergency settings as well as in societies in transition in LMICs is needed and justified by the results of this systematic literature review.

  2. Global mental health and trauma exposure: the current evidence for the relationship between traumatic experiences and spirit possession

    Science.gov (United States)

    Hecker, Tobias; Braitmayer, Lars; van Duijl, Marjolein

    2015-01-01

    Background We present a literature review on trauma exposure and spirit possession in low- and middle-income countries (LMICs). Despite the World Health Organization's objective of culturally appropriate mental health care in the Mental Health Action Plan 2013–2020, and the recommendations of the Inter-Agency Standing Committee to consider local idioms of distress and to collaborate with local resources, this topic still receives very little attention. Pathological spirit possession is commonly defined as involuntary, uncontrollable, and occurring outside of ritual settings. It is often associated with stigmatization, suffering, and dysfunctional behavior. While spirit possession has been discussed as an idiom of distress in anthropological literature, recent quantitative studies have presented support for a strong relationship between traumatic experiences and pathological possession states. Objective The aim of this review was to investigate this relationship systematically in LMICs, in view of the debate on how to address the mental health gap in LMICs. Methods Twenty-one articles, published in peer-reviewed English-language journals between 1994 and 2013, were identified and analyzed with regard to prevalence of possessive trance disorders, patients’ sociodemographic characteristics, and its relation to traumatic experiences. Results The review and analysis of 917 patients with symptoms of possessive trance disorders from 14 LMICs indicated that it is a phenomenon occurring worldwide and with global relevance. This literature review suggests a strong relationship between trauma exposure and spirit possession with high prevalence rates found especially in postwar areas in African countries. Conclusions More attention for possessive trance disorders in mental health and psychosocial intervention programs in humanitarian emergency settings as well as in societies in transition in LMICs is needed and justified by the results of this systematic literature review

  3. Global mental health and trauma exposure: the current evidence for the relationship between traumatic experiences and spirit possession

    Directory of Open Access Journals (Sweden)

    Tobias Hecker

    2015-11-01

    Full Text Available Background: We present a literature review on trauma exposure and spirit possession in low- and middle-income countries (LMICs. Despite the World Health Organization's objective of culturally appropriate mental health care in the Mental Health Action Plan 2013–2020, and the recommendations of the Inter-Agency Standing Committee to consider local idioms of distress and to collaborate with local resources, this topic still receives very little attention. Pathological spirit possession is commonly defined as involuntary, uncontrollable, and occurring outside of ritual settings. It is often associated with stigmatization, suffering, and dysfunctional behavior. While spirit possession has been discussed as an idiom of distress in anthropological literature, recent quantitative studies have presented support for a strong relationship between traumatic experiences and pathological possession states. Objective: The aim of this review was to investigate this relationship systematically in LMICs, in view of the debate on how to address the mental health gap in LMICs. Methods: Twenty-one articles, published in peer-reviewed English-language journals between 1994 and 2013, were identified and analyzed with regard to prevalence of possessive trance disorders, patients’ sociodemographic characteristics, and its relation to traumatic experiences. Results: The review and analysis of 917 patients with symptoms of possessive trance disorders from 14 LMICs indicated that it is a phenomenon occurring worldwide and with global relevance. This literature review suggests a strong relationship between trauma exposure and spirit possession with high prevalence rates found especially in postwar areas in African countries. Conclusions: More attention for possessive trance disorders in mental health and psychosocial intervention programs in humanitarian emergency settings as well as in societies in transition in LMICs is needed and justified by the results of this

  4. Silver Nanoparticles Complexed with Bovine Submaxillary Mucin Possess Strong Antibacterial Activity and Protect against Seedling Infection.

    Science.gov (United States)

    Makarovsky, Daria; Fadeev, Ludmila; Salam, Bolaji Babajide; Zelinger, Einat; Matan, Ofra; Inbar, Jacob; Jurkevitch, Edouard; Gozin, Michael; Burdman, Saul

    2018-02-15

    A simple method for the synthesis of nanoparticles (NPs) of silver (Ag) in a matrix of bovine submaxillary mucin (BSM) was reported previously by some of the authors of this study. Based on mucin characteristics such as long-lasting stability, water solubility, and surfactant and adhesive characteristics, we hypothesized that these compounds, named BSM-Ag NPs, may possess favorable properties as potent antimicrobial agents. The goal of this study was to assess whether BSM-Ag NPs possess antibacterial activity, focusing on important plant-pathogenic bacterial strains representing both Gram-negative ( Acidovorax and Xanthomonas ) and Gram-positive ( Clavibacter ) genera. Growth inhibition and bactericidal assays, as well as electron microscopic observations, demonstrate that BSM-Ag NPs, at relatively low concentrations of silver, exert strong antimicrobial effects. Moreover, we show that treatment of melon seeds with BSM-Ag NPs effectively prevents seed-to-seedling transmission of Acidovorax citrulli , one of the most threatening pathogens of cucurbit production worldwide. Overall, our findings demonstrate strong antimicrobial activity of BSM-Ag NPs and their potential application for reducing the spread and establishment of devastating bacterial plant diseases in agriculture. IMPORTANCE Bacterial plant diseases challenge agricultural production, and the means available to manage them are limited. Importantly, many plant-pathogenic bacteria have the ability to colonize seeds, and seed-to-seedling transmission is a critical route by which bacterial plant diseases spread to new regions and countries. The significance of our study resides in the following aspects: (i) the simplicity of the method of BSM-Ag NP synthesis, (ii) the advantageous chemical properties of BSM-Ag NPs, (iii) the strong antibacterial activity of BSM-Ag NPs at relatively low concentrations of silver, and (iv) the fact that, in contrast to most studies on the effects of metal NPs on plant pathogens

  5. Additive and polynomial representations

    CERN Document Server

    Krantz, David H; Suppes, Patrick

    1971-01-01

    Additive and Polynomial Representations deals with major representation theorems in which the qualitative structure is reflected as some polynomial function of one or more numerical functions defined on the basic entities. Examples are additive expressions of a single measure (such as the probability of disjoint events being the sum of their probabilities), and additive expressions of two measures (such as the logarithm of momentum being the sum of log mass and log velocity terms). The book describes the three basic procedures of fundamental measurement as the mathematical pivot, as the utiliz

  6. The possession game? A comparative analysis of ball retention and team success in European and international football, 2007-2010.

    Science.gov (United States)

    Collet, Christian

    2013-01-01

    Possession is thought of as central to success in modern football, but questions remain about its impact on positive team outcomes (Bate, 1988; Hughes & Franks, 2005; Pollard & Reep, 1997; Stanhope, 2001). Recent studies (e.g. Bloomfield, Polman, & O'Donoghue, 2005; Carling, Williams, & Reilly, 2005; James, Mellallieu, & Holley, 2002; Jones, James, & Mellalieu, 2004; Lago, 2009; Lago & Martin, 2007; Lago-Peñas & Dellal, 2010; Lago-Peñas, Lago-Ballesteros, Dellal, & Gómez, 2010; Taylor, Mellalieu, & James, 2005; Tucker, Mellalieu, James, & Taylor, 2005) that have examined these questions have often been constrained by an exclusive focus on English or Spanish domestic play. Using data from five European leagues, UEFA and FIFA tournaments, the study found that while possession time and passing predicted aggregated team success in domestic league play, both variables were poor predictors at the individual match level once team quality and home advantage were accounted for. In league play, the effect of greater possession was consistently negative; in the Champions League, it had virtually no impact. In national team tournaments, possession failed to reach significance when offensive factors were accounted for. Much of the success behind the 'possession game' was thus a function of elite teams confined in geographic and competitive space. That ball hegemony was not consistently tied to success suggests that a nuanced approach to possession is needed to account for variant strategic environments (e.g. James et al., 2002) and compels match analysts to re-examine the metric's overall value.

  7. Food Additives and Hyperkinesis

    Science.gov (United States)

    Wender, Ester H.

    1977-01-01

    The hypothesis that food additives are causally associated with hyperkinesis and learning disabilities in children is reviewed, and available data are summarized. Available from: American Medical Association 535 North Dearborn Street Chicago, Illinois 60610. (JG)

  8. Groups – Additive Notation

    Directory of Open Access Journals (Sweden)

    Coghetto Roland

    2015-06-01

    Full Text Available We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

  9. Groups – Additive Notation

    OpenAIRE

    Coghetto Roland

    2015-01-01

    We translate the articles covering group theory already available in the Mizar Mathematical Library from multiplicative into additive notation. We adapt the works of Wojciech A. Trybulec [41, 42, 43] and Artur Korniłowicz [25].

  10. Does the copolymer poly(vinylidene cyanide-tricyanoethylene) possess piezoelectricity?

    Science.gov (United States)

    Wang, Zhi-Yin; Su, Ke-He; Xu, Qiong

    2012-10-01

    The geometry, energy, internal rotation barrier, dipole moment, and molecular polarizability of the α- and β-chain models of poly(vinylidene cyanide-tricyanoethylene) [P(VDCN-TrCN)] were studied with density functional theory at the B3PW91/6-31G(d) level. The effects of the chain length and the TrCN content on the copolymer chain stability, the chain conformation, and the electrical properties of P(VDCN-TrCN) were examined and compared with those of poly(vinylidene fluoride-trifluoroethylene) and PVDCN to gauge whether P(VDCN-TrCN) would be expected to possess substantial piezoelectricity. The results of this study showed that the stability of the β conformation increases and the energy difference per monomer unit between the β- and α-chains decreases with increasing TrCN. However, introducing TrCN into VDCN will not significantly enhance the radius of curvature of the P(VDCN-TrCN) chains. The average dipole moment per monomer unit in the β-chain is affected by the chain curvature and the TrCN content. The amount of piezoelectricity present in P(VDCN-TrCN) is slightly smaller than that in PVDCN, and is less than that in poly(vinylidene fluoride-trifluoroethylene).

  11. Steady nanofluid flow with variable fluid possessions over a linearly extending surface: A Lie group exploration

    Directory of Open Access Journals (Sweden)

    Kalidas Das

    2018-03-01

    Full Text Available The temperament of stream characteristic, heat and mass transfer of MHD forced convective flow over a linearly expanding porous medium has been scrutinized in the progress exploration. The germane possessions of the liquid like viscosity along with thermal conductivity are believed to be variable in nature, directly influenced by the temperature of flow. As soon as gaining the system of leading equations of the stream, Lie symmetric group transformations have been employed to come across the fitting parallel conversions to alter the central PDEs into a suit of ODEs. The renovated system of ODE with appropriate boundary conditions is numerically solved with the assistance of illustrative software MAPLE 17. The consequences of the relevant factors of the system have been exemplified through charts and graphs. An analogous qualified survey has been prepared among present inquiry and subsisting reads and achieved an admirable accord between them. The variable viscosity parameter has more significant effect on nanofluid velocity than regular fluid and temporal profile as well as nanoparticle concentration is also influenced with variable viscosity. Keywords: Nanofluid, Stretching sheet, Variable viscosity, Variable thermal conductivity, Lie symmetry group

  12. Facile approach to the fabrication of a micropattern possessing nanoscale substructure.

    Science.gov (United States)

    Ji, Qiang; Jiang, Xuesong; Yin, Jie

    2007-12-04

    On the basis of the combined technologies of photolithography and reaction-induced phase separation (RIPS), a facile approach has been successfully developed for the fabrication of a micropattern possessing nanoscale substructure on the thin film surface. This approach involves three steps. In the first step, a thin film was prepared by spin coating from a solution of a commercial random copolymer, polystyrene-r-poly(methyl methacrylate) (PS-r-PMMA) and a commercial crosslinker, trimethylolpropane triacrylate (TMPTA). In the second step, photolithograph was performed with the thin film using a 250 W high-pressure mercury lamp to produce the micropattern. Finally, the resulting micropattern was annealed at 200 degrees C for a certain time, and reaction-induced phase separation occurred. After soaking in chloroform for 4 h, nanoscale substructure was obtained. The whole processes were traced by atomic force microscopy (AFM), X-ray photoelectron spectrometry (XPS), and Fourier transform infrared (FTIR) spectroscopy, and the results supported the proposed structure.

  13. Highly tilted liquid crystalline materials possessing a direct phase transition from antiferroelectric to isotropic phase

    Energy Technology Data Exchange (ETDEWEB)

    Milewska, K.; Drzewiński, W. [Institute of Chemistry, Military University of Technology, 00-908 Warsaw (Poland); Czerwiński, M., E-mail: mczerwinski@wat.edu.pl [Institute of Chemistry, Military University of Technology, 00-908 Warsaw (Poland); Dąbrowski, R. [Institute of Chemistry, Military University of Technology, 00-908 Warsaw (Poland); Piecek, W. [Institute of Applied Physics, Military University of Technology, 00-908 Warsaw (Poland)

    2016-03-01

    Pure compounds and multicomponent mixtures with a broad temperature range of high tilted liquid crystalline antiferroelectric phase and a direct phase transition from antiferroelectric to isotropic phase, were obtained. X-ray diffraction analysis confirms these kinds of materials form a high tilted anticlinic phase, with a fixed layer spacing and very weak dependency upon temperature, after the transition from the isotropic phase. Due to this, not only pure orthoconic antiferroelectric liquid crystals but also those with a moderate tilt should generate a good dark state. Furthermore, due to the increased potential for forming anticlinic forces, such materials could minimize a commonly observed asymmetry of a rise and fall switching times at a surface stabilized geometry. - Highlights: • The new class of liquid crystalline materials with the direct SmC{sub A}*. • Iso phase transition were obtained. • Materials possess the layer spacing fixed and very weak dependent upon temperature. • Smectic layers without shrinkage are observed. • A good dark state can be generate in SSAFLC.

  14. Skeletal muscle myoblasts possess a stretch-responsive local angiotensin signalling system.

    Science.gov (United States)

    Johnston, Adam P W; Baker, Jeff; De Lisio, Michael; Parise, Gianni

    2011-06-01

    A paucity of information exists regarding the presence of local renin-angiotensin systems (RASs) in skeletal muscle and associated muscle stem cells. Skeletal muscle and muscle stem cells were isolated from C57BL/6 mice and examined for the presence of a local RAS using quantitative reverse transcriptase polymerase chain reaction (qRT-PCR), immunohistochemistry (IHC), Western blotting and liquid chromatography-mass spectrometry (LC-MS). Furthermore, the effect of mechanical stimulation on RAS member gene expression was analysed. Whole skeletal muscle, primary myoblasts and C2C12 derived myoblasts and myotubes differentially expressed members of the RAS including angiotensinogen, angiotensin-converting enzyme (ACE), angiotensin II (Ang II) type 1 (AT(1)) and type 2 (AT(2)). Renin transcripts were never detected, however, mRNA for the 'renin-like' enzyme cathepsin D was observed and Ang I and Ang II were identified in cell culture supernatants from proliferating myoblasts. AT(1) appeared to co-localise with polymerised actin filaments in proliferating myoblasts and was primarily found in the nucleus of terminally differentiated myotubes. Furthermore, mechanical stretch of proliferating and differentiating C2C12 cells differentially induced mRNA expression of angiotensinogen, AT(1) and AT(2). Proliferating and differentiated muscle stem cells possess a local stress-responsive RAS in vitro. The precise function of a local RAS in myoblasts remains unknown. However, evidence presented here suggests that Ang II may be a regulator of skeletal muscle myoblasts.

  15. Criminal history and future offending of juveniles convicted of the possession of child pornography.

    Science.gov (United States)

    Aebi, Marcel; Plattner, Belinda; Ernest, Melanie; Kaszynski, Katie; Bessler, Cornelia

    2014-08-01

    Most child pornography is distributed online. It is estimated that 3% to 15% of child pornography consumers are juveniles. The present study analyzed a consecutive sample of 54 male juveniles convicted of the possession of child pornography. Demographic characteristics, criminal history, and subsequent offending were assessed from criminal files and official reports. Juvenile possessors of child pornography were compared to three different groups of juveniles: Juvenile possessors of other illegal pornography (n = 42), juveniles who committed a sexual contact offense against a child (n = 64), and juveniles who committed a sexual contact offense against a peer or adult (n = 104). Juvenile possessors of child pornography were found to have downloaded the illegal material more frequently and over a longer time period than juvenile possessors of other illegal pornography. Furthermore, juvenile possessors of child pornography differed from juveniles who had committed a sexual contact offense in terms of demographics and showed fewer previous and subsequent offending than juveniles who sexually offended against a peer or adult. We conclude that juvenile possessors of child pornography need a specific target intervention focusing on dysfunctional Internet use and sexually deviant arousal. © The Author(s) 2013.

  16. Tribological and corrosion behaviour of electroless Ni-B coating possessing a blackberry like structure

    Science.gov (United States)

    Bülbül, Ferhat; Altun, Hikmet; Küçük, Özkan; Ezirmik, Vefa

    2012-08-01

    This study aims to evaluate the tribological and corrosion properties of the electroless Ni-B coating deposited on AISI 304 stainless steels. The microstructure of the coating was characterized using x-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectrometry (SEM-EDS). XRD analysis revealed that the prepared coating possessed an amorphous character. SEM-EDS investigation also indicated that a non-stoichiometric Ni-B coating was deposited with a columnar growth mechanism on the stainless steel substrate and the morphology of the growth surface was blackberry-like. The hardness and tribological properties were characterized by microhardness and a pin-on-disc wear test. The electroless Ni-B coated sample had a higher degree of hardness, a lower friction coefficient and a lower wear rate than the uncoated substrate. The electrochemical potentiodynamic polarization method was used to evaluate the corrosion resistance of the coating. The electroless Ni-B coating offered cathodic protection on the substrate by acting as a sacrificial anode although it was electrochemically more reactive than the stainless steel substrate.

  17. Stereotypes possess heterogeneous directionality: a theoretical and empirical exploration of stereotype structure and content.

    Science.gov (United States)

    Cox, William T L; Devine, Patricia G

    2015-01-01

    We advance a theory-driven approach to stereotype structure, informed by connectionist theories of cognition. Whereas traditional models define or tacitly assume that stereotypes possess inherently Group → Attribute activation directionality (e.g., Black activates criminal), our model predicts heterogeneous stereotype directionality. Alongside the classically studied Group → Attribute stereotypes, some stereotypes should be bidirectional (i.e., Group ⇄ Attribute) and others should have Attribute → Group unidirectionality (e.g., fashionable activates gay). We tested this prediction in several large-scale studies with human participants (NCombined = 4,817), assessing stereotypic inferences among various groups and attributes. Supporting predictions, we found heterogeneous directionality both among the stereotype links related to a given social group and also between the links of different social groups. These efforts yield rich datasets that map the networks of stereotype links related to several social groups. We make these datasets publicly available, enabling other researchers to explore a number of questions related to stereotypes and stereotyping. Stereotype directionality is an understudied feature of stereotypes and stereotyping with widespread implications for the development, measurement, maintenance, expression, and change of stereotypes, stereotyping, prejudice, and discrimination.

  18. A novel dioxygenation product of arachidonic acid possesses potent chemotactic activity for human polymorphonuclear leukocytes.

    Science.gov (United States)

    Shak, S; Perez, H D; Goldstein, I M

    1983-12-25

    We have found that a novel dioxygenation product of arachidonic acid, 8(S),15(S)-dihydroxy-5,11-cis-9,13-trans-eicosatetraenoic acid (8,15-diHETE), possesses chemotactic activity for human polymorphonuclear leukocytes comparable to that of leukotriene B4. Authentic 8,15-diHETE, identified by gas chromatography-mass spectrometry, was prepared by treating arachidonic acid with soybean lipoxygenase and was purified by reverse-phase high performance liquid chromatography. Using a "leading front" assay, 8,15-diHETE exhibited significant chemotactic activity at a concentration of 5.0 ng/ml. Maximum chemotactic activity was observed at a concentration of 30 ng/ml. The 8,15-diHETE generated by mixed human leukocytes after stimulation with arachidonic acid and the calcium ionophore, A23187, exhibited quantitatively similar chemotactic activity. Two synthetic all-trans conjugated isomers of 8,15-diHETE, however, were not chemotactic at concentrations up to 500 ng/ml. In contrast to its potent chemotactic activity, 8,15-diHETE (at concentrations up to 10 micrograms/ml) was relatively inactive with respect to its ability to provoke either degranulation or generation of superoxide anion radicals by cytochalasin B-treated leukocytes. Both leukotriene B4 and 8,15-diHETE may be important mediators of inflammation.

  19. Experiences of possession and paranormal phenomena among women in the general population: are they related to traumatic stress and dissociation?

    Science.gov (United States)

    Sar, Vedat; Alioğlu, Firdevs; Akyüz, Gamze

    2014-01-01

    This study sought to determine the prevalence of experiences of possession and paranormal phenomena (PNP) in the general population and their possible relations to each other and to traumatic stress and dissociation. The study was conducted on a representative female sample recruited from a town in central eastern Turkey. The Dissociative Disorders Interview Schedule, the posttraumatic stress disorder (PTSD) and borderline personality disorder sections of the Structured Clinical Interviews for DSM-IV Axis-I and Personality Disorders, and the Childhood Abuse and Neglect Questionnaire were administered to 628 women. Of these, 127 (20.2%) women reported at least 1 type of PNP and 13 (2.1%) women reported possession. Women with a dissociative disorder reported all types of possession and PNP (except telepathy) more frequently than those without. Whereas women with a trauma history in childhood and adulthood or PTSD reported possession more frequently than those without, PNP were associated with childhood trauma only. Factor analysis yielded 4 dimensions: possession by and/or contact with nonhuman entities, extrasensory communications, possession by a human entity, and precognition. These factors correlated with number of secondary features of dissociative identity disorder and Schneiderian symptoms. Latent class analysis identified 3 groups. The most traumatized group, with predominantly dissociative and trauma-related disorders, had the highest scores on all factors. Notwithstanding their presence in healthy individuals, possession and PNP were associated with trauma and dissociation in a subgroup of affected participants. Both types of experience seem to be normal human capacities of experiencing that may be involved in response to traumatic stress. Given the small numbers, this study should be considered preliminary.

  20. Alternative additives; Alternative additiver

    Energy Technology Data Exchange (ETDEWEB)

    2007-08-15

    In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations aiming at reducing corrosion or slagging related problems. The following products have been obtained, characterised and evaluated: 1) Brewery draff 2) Danish de-gassed manure 3) Paper sludge 4) Moulding sand 5) Spent bleaching earth 6) Anorthosite 7) Sand 8) Clay-sludge. Most of the above alternative additive candidates are deemed unsuitable due to insufficient chemical effect and/or expensive requirements for pre-treatment (such as drying and transportation). 3 products were selected for full-scale testing: de-gassed manure, spent bleaching earth and clay slugde. The full scale tests were undertaken at the biomass-fired power stations in Koege, Slagelse and Ensted. Spent bleaching earth (SBE) and clay sludge were the only tested additive candidates that had a proven ability to react with KCl, to thereby reduce Cl-concentrations in deposits, and reduce the deposit flux to superheater tubes. Their performance was shown to nearly as good as commercial additives. De-gassed manure, however, did not evaluate positively due to inhibiting effects of Ca in the manure. Furthermore, de-gassed manure has a high concentration of heavy metals, which imposes a financial burden with regard to proper disposal of the ash by-products. Clay-sludge is a wet clay slurring, and drying and transportation of this product entails substantial costs. Spent bleaching does not require much pre-treatment and is therefore the most promising alternative additive. On the other hand, bleaching earth contains residual plant oil which means that a range of legislation relating to waste combustion comes into play. Not least a waste combustion fee of 330 DKK/tonne. For all alternative (and commercial) additives disposal costs of the increase ash by-products represents a significant cost. This is

  1. Characterizing the Effective Bandwidth of Nonlinear Vibratory Energy Harvesters Possessing Multiple Stable Equilibria

    Science.gov (United States)

    Panyam Mohan Ram, Meghashyam

    In the last few years, advances in micro-fabrication technologies have lead to the development of low-power electronic devices spanning critical fields related to sensing, data transmission, and medical implants. Unfortunately, effective utilization of these devices is currently hindered by their reliance on batteries. In many of these applications, batteries may not be a viable choice as they have a fixed storage capacity and need to be constantly replaced or recharged. In light of such challenges, several novel concepts for micro-power generation have been recently introduced to harness, otherwise, wasted ambient energy from the environment and maintain these low-power devices. Vibratory energy harvesting is one such concept which has received significant attention in recent years. While linear vibratory energy harvesters have been well studied in the literature and their performance metrics have been established, recent research has focused on deliberate introduction of stiffness nonlinearities into the design of these devices. It has been shown that, nonlinear energy harvesters have a wider steady-state frequency bandwidth as compared to their linear counterparts, leading to the premise that they can used to improve performance, and decrease sensitivity to variations in the design and excitation parameters. This dissertation aims to investigate this premise by developing an analytical framework to study the influence of stiffness nonlinearities on the performance and effective bandwidth of nonlinear vibratory energy harvesters. To achieve this goal, the dissertation is divided into three parts. The first part investigates the performance of bi-stable energy harvesters possessing a symmetric quartic potential energy function under harmonic excitations and carries out a detailed analysis to define their effective frequency bandwidth. The second part investigates the relative performance of mono- and bi-stable energy harvesters under optimal electric loading

  2. Novel rod-shaped viruses isolated from garlic, Allium sativum, possessing a unique genome organization.

    Science.gov (United States)

    Sumi, S; Tsuneyoshi, T; Furutani, H

    1993-09-01

    Rod-shaped flexuous viruses were partially purified from garlic plants (Allium sativum) showing typical mosaic symptoms. The genome was shown to be composed of RNA with a poly(A) tail of an estimated size of 10 kb as shown by denaturing agarose gel electrophoresis. We constructed cDNA libraries and screened four independent clones, which were designated GV-A, GV-B, GV-C and GV-D, using Northern and Southern blot hybridization. Nucleotide sequence determination of the cDNAs, two of which correspond to nearly one-third of the virus genomic RNA, shows that all of these viruses possess an identical genomic structure and that also at least four proteins are encoded in the viral cDNA, their M(r)s being estimated to be 15K, 27K, 40K and 11K. The 15K open reading frame (ORF) encodes the core-like sequence of a zinc finger protein preceded by a cluster of basic amino acid residues. The 27K ORF probably encodes the viral coat protein (CP), based on both the existence of some conserved sequences observed in many other rod-shaped or flexuous virus CPs and an overall amino acid sequence similarity to potexvirus and carlavirus CPs. The 11K ORF shows significant amino acid sequence similarities to the corresponding 12K proteins of the potexviruses and carlaviruses. On the other hand, the 40K ORF product does not resemble any other plant virus gene products reported so far. The genomic organization in the 3' region of the garlic viruses resembles, but clearly differs from, that of carlaviruses. Phylogenetic analysis based upon the amino acid sequence of the viral capsid protein also indicates that the garlic viruses have a unique and distinct domain different from those of the potexvirus and carlavirus groups. The results suggest that the garlic viruses described here belong to an unclassified and new virus group closely related to the carlaviruses.

  3. To have and to hold: possessing the sacred in the late renaissance

    Directory of Open Access Journals (Sweden)

    Erin E. Benay

    2015-02-01

    Full Text Available Private devotional art of the early 17th century often found its place in the galleries of noblemen and women whose diverse collections were symbols not only of stylistic taste, but of their owners’ exhaustive curiosity. In these domestic settings, boundaries between sacred and secular were permeable, as the unprecedented physical intimacy portrayed in popular religious subjects such as St Matthew and the Angel, the Stigmatisation of St Francis, or Christ’s Agony in the Garden reveal. Representations of the latter reminded viewers of Christ’s human, corporal suffering and suggested a model of resolve strengthened by prayer. The Agony in the Garden appears on the interior of Jacopo Ligozzi’s virtuosic Portable Altar with Carrying Case (1608, likely a Medici gift presented to the Austrian court in anticipation of the marriage of archduchess Maria Maddalena to soon-to-be grand duke Cosimo II. Adorned with lavish botanical motifs on its exterior, the Altar’s potency as a sacred possession was redoubled by the owner’s tactile revelation of the portrayal of Christ supported by an Angel contained inside the case. Comprised of wood, oil on copper, and pietre dure inlay, it is an object intended to be held, opened, and experienced. This paper suggests that Ligozzi’s selective combination of sumptuous materials and choice of subject matter – botanical illustration and Christological iconography – allowed the object to appeal to the full sensorium, and therefore to function as efficaciously as a devotional aid as it did as a curiosity among other rare collectibles.

  4. Bacillus sp.CDB3 isolated from cattle dip-sites possesses two ars gene clusters

    Institute of Scientific and Technical Information of China (English)

    Somanath Bhat; Xi Luo; Zhiqiang Xu; Lixia Liu; Ren Zhang

    2011-01-01

    Contamination of soil and water by arsenic is a global problem.In Australia, the dipping of cattle in arsenic-containing solution to control cattle ticks in last centenary has left many sites heavily contaminated with arsenic and other toxicants.We had previously isolated five soil bacterial strains (CDB1-5) highly resistant to arsenic.To understand the resistance mechanism, molecular studies have been carried out.Two chromosome-encoded arsenic resistance (ars) gene clusters have been cloned from CDB3 (Bacillus sp.).They both function in Escherichia coli and cluster 1 exerts a much higher resistance to the toxic metalloid.Cluster 2 is smaller possessing four open reading frames (ORFs) arsRorf2BC, similar to that identified in Bacillus subtilis Skin element.Among the eight ORFs in cluster 1 five are analogs of common ars genes found in other bacteria, however, organized in a unique order arsRBCDA instead of arsRDABC.Three other putative genes are located directly downstream and designated as arsTIP based on the homologies of their theoretical translation sequences respectively to thioredoxin reductases, iron-sulphur cluster proteins and protein phosphatases.The latter two are novel of any known ars operons.The arsD gene from Bacillus species was cloned for the first time and the predict protein differs from the well studied E.coli ArsD by lacking two pairs of C-terrninal cysteine residues.Its functional involvement in arsenic resistance has been confirmed by a deletion experiment.There exists also an inverted repeat in the intergenic region between arsC and arsD implying some unknown transcription regulation.

  5. Exosomes carring gag/env of ALV-J possess negative effect on immunocytes.

    Science.gov (United States)

    Wang, Guihua; Wang, Zhenzhen; Zhuang, Pingping; Zhao, Xiaomin; Cheng, Ziqiang

    2017-11-01

    J subgroup avian leukosis virus (ALV-J) is an exogenous retrovirus of avian. A key feature of ALV-J infection is leading to severe immunosuppressive characteristic of diseases. Viral components of retrovirus were reported closely associated with immunosuppression, and several similarities between exosomes and retrovirus preparations have lead to the hypotheses of retrovirus hijacker exosomes pathway. In this study, we purified exosomes from DF-1 cells infected and uninfected by ALV-J. Electron microscopy and mass spectrometry (MS) analysis showed that ALV-J not only increased the production of exosomes from ALV-J infected DF-1 cells (Exo-J) but also stimulated some proteins expression, especially ALV-J components secreted in exosomes. Immunosuppressive domain peptide (ISD) of envelope subunit transmembrane (TM) and gag of ALV-J were secreted in Exo-J. It has been reported that HIV gag was budded from endosome-like domains of the T cell plasma membrane. But env protein was first detected in exosomes from retrovirus infected cells. We found that Exo-J caused negative effects on splenocytes in a dose-dependant manner by flow cytometric analysis. And low dose of Exo-J activated immune activity of splenocytes, while high dose possessed immunosuppressive properties. Interestingly, Exo-J has no significant effects on the immunosuppression induced by ALV-J, and the immunosuppressive effects induced by Exo-J lower than that by ALV-J. Taken together, our data indicated that Exo-J supplied a microenvironment for the replication and transformation of ALV-J. Copyright © 2017. Published by Elsevier Ltd.

  6. Audio-visual interactions uniquely contribute to resolution of visual conflict in people possessing absolute pitch.

    Directory of Open Access Journals (Sweden)

    Sujin Kim

    Full Text Available Individuals possessing absolute pitch (AP are able to identify a given musical tone or to reproduce it without reference to another tone. The present study sought to learn whether this exceptional auditory ability impacts visual perception under stimulus conditions that provoke visual competition in the form of binocular rivalry. Nineteen adult participants with 3-19 years of musical training were divided into two groups according to their performance on a task involving identification of the specific note associated with hearing a given musical pitch. During test trials lasting just over half a minute, participants dichoptically viewed a scrolling musical score presented to one eye and a drifting sinusoidal grating presented to the other eye; throughout the trial they pressed buttons to track the alternations in visual awareness produced by these dissimilar monocular stimuli. On "pitch-congruent" trials, participants heard an auditory melody that was congruent in pitch with the visual score, on "pitch-incongruent" trials they heard a transposed auditory melody that was congruent with the score in melody but not in pitch, and on "melody-incongruent" trials they heard an auditory melody completely different from the visual score. For both groups, the visual musical scores predominated over the gratings when the auditory melody was congruent compared to when it was incongruent. Moreover, the AP participants experienced greater predominance of the visual score when it was accompanied by the pitch-congruent melody compared to the same melody transposed in pitch; for non-AP musicians, pitch-congruent and pitch-incongruent trials yielded equivalent predominance. Analysis of individual durations of dominance revealed differential effects on dominance and suppression durations for AP and non-AP participants. These results reveal that AP is accompanied by a robust form of bisensory interaction between tonal frequencies and musical notation that boosts

  7. Rheum turkestanicum rhizomes possess anti-hypertriglyceridemic, but not hypoglycemic or hepatoprotective effect in experimental diabetes

    Directory of Open Access Journals (Sweden)

    Mousa-Al-Reza Hadjzadeh

    2017-01-01

    Full Text Available Objective: Rheum turkestanicum (R. turkestanicum rhizomes have been used in Iranain traditional medicine as an anti-diabetic agent. The purpose of the present investigation was to evaluate the anti-diabetic and antioxidant activities of R. turkestanicum rhizome extract in streptozotocin-induced diabetic rats.Materials and Methods: Diabetes was induced by a single intraperitoneal injection of 55 mg/kg streptozotocin in male Wistar rats. Diabetic rats received the decoction extract of R. turkestanicum rhizomes at the doses of 200, 400 and 600 mg/kg daily by gavage for 3 weeks. Serum glucose and lipid levels were measured in all groups before diabetes induction and at the end of week 3. Oxidative stress was evaluated in the liver by measurement of malondialdehyde levels and total thiol concentration at the end of the experiment.Results: A significant increase in serum glucose and triglyceride levels was observed in diabetic rats, which was accompanied by increased malondialdehyde levels and decreased total thiol concentration in the liver after 3 weeks. Treatment of diabetic rats with R. turkestanicum rhizome extract at the doses of 200, 400 and 600 mg/kg over a 3-week period did not change serum glucose, hepatic malondialdehyde and total thiol levels in diabetic rats. However, treatment with R. turkestanicum extract significantly decreased serum triglyceride levels in a dose-dependent manner at the end of the experiment.Conclusion: R. turkestanicum rhizome extract possess anti-hypertriglyceridemic, but not hypoglycemic or hepatoprotective effect in diabetic rats. Therefore, R. turkestanicum rhizome should be consumed with more caution by diabetic patients.

  8. Deoxyarbutin Possesses a Potent Skin-Lightening Capacity with No Discernible Cytotoxicity against Melanosomes.

    Directory of Open Access Journals (Sweden)

    Fang Miao

    Full Text Available Safe and effective ingredients capable of removing undesired hyperpigmentation from facial skin are urgently needed for both pharmaceutical and cosmetic purposes. Deoxyarbutin (4-[(tetrahydro-2H-pyran-2-yl oxy] phenol, D-Arb is a glucoside derivative of hydroquinone. Here, we investigated the toxicity and efficacy of D-Arb at the sub-cellular level (directly on melanosomes and skin pigmentation using in vivo and in vitro models to compare with its parent compound hydroquinone (1,4-benzenediol, HQ. At first, we examined the ultrastructural changes of melanosomes in hyperpigmented guinea pig skin induced by 308-nm monochromatic excimer lightand/or treated with HQ and D-Arb using transmission electron microscopy. The results showed that prominent changes in the melanosomal membrane, such as bulb-like structure and even complete rupture of the outer membranes, were found in the skin after topical application of 5% HQ for 10 days. These changes were barely observed in the skin treated with D-Arb. To further clarify whether membrane toxicity of HQ was a direct result of the compound treatment, we also examinedultrastructural changes of individual melanosomes purified from MNT1 human melanoma cells. Similar observations were obtained from the naked melanosome model in vitro. Finally, we determined the effects of melanosomal fractions exposed to HQ or D-Arb on hydroxyl radical generation in the Fenton reaction utilizing an electron spin resonance assay. D-Arb-treated melanosomesexhibit a moderate hydroxyl radical-scavenging activity, whereas HQ-treated melanosomessignificantly generate more hydroxyl free radicals. This study suggests that D-Arb possesses a potent ability in skin lightening and antioxidation with less melanosome cytotoxicity.

  9. Deoxyarbutin Possesses a Potent Skin-Lightening Capacity with No Discernible Cytotoxicity against Melanosomes.

    Science.gov (United States)

    Miao, Fang; Shi, Ying; Fan, Zhi-Feng; Jiang, Shan; Xu, Shi-Zheng; Lei, Tie-Chi

    2016-01-01

    Safe and effective ingredients capable of removing undesired hyperpigmentation from facial skin are urgently needed for both pharmaceutical and cosmetic purposes. Deoxyarbutin (4-[(tetrahydro-2H-pyran-2-yl) oxy] phenol, D-Arb) is a glucoside derivative of hydroquinone. Here, we investigated the toxicity and efficacy of D-Arb at the sub-cellular level (directly on melanosomes) and skin pigmentation using in vivo and in vitro models to compare with its parent compound hydroquinone (1,4-benzenediol, HQ). At first, we examined the ultrastructural changes of melanosomes in hyperpigmented guinea pig skin induced by 308-nm monochromatic excimer lightand/or treated with HQ and D-Arb using transmission electron microscopy. The results showed that prominent changes in the melanosomal membrane, such as bulb-like structure and even complete rupture of the outer membranes, were found in the skin after topical application of 5% HQ for 10 days. These changes were barely observed in the skin treated with D-Arb. To further clarify whether membrane toxicity of HQ was a direct result of the compound treatment, we also examinedultrastructural changes of individual melanosomes purified from MNT1 human melanoma cells. Similar observations were obtained from the naked melanosome model in vitro. Finally, we determined the effects of melanosomal fractions exposed to HQ or D-Arb on hydroxyl radical generation in the Fenton reaction utilizing an electron spin resonance assay. D-Arb-treated melanosomesexhibit a moderate hydroxyl radical-scavenging activity, whereas HQ-treated melanosomessignificantly generate more hydroxyl free radicals. This study suggests that D-Arb possesses a potent ability in skin lightening and antioxidation with less melanosome cytotoxicity.

  10. E2-EPF UCP Possesses E3 Ubiquitin Ligase Activity via Its Cysteine 118 Residue.

    Science.gov (United States)

    Lim, Jung Hwa; Shin, Hee Won; Chung, Kyung-Sook; Kim, Nam-Soon; Kim, Ju Hee; Jung, Hong-Ryul; Im, Dong-Soo; Jung, Cho-Rok

    Here, we show that E2-EPF ubiquitin carrier protein (UCP) elongated E3-independent polyubiquitin chains on the lysine residues of von Hippel-Lindau protein (pVHL) and its own lysine residues both in vitro and in vivo. The initiation of the ubiquitin reaction depended on not only Lys11 linkage but also the Lys6, Lys48 and Lys63 residues of ubiquitin, which were involved in polyubiquitin chain formation on UCP itself. UCP self-association occurred through the UBC domain, which also contributed to the interaction with pVHL. The polyubiquitin chains appeared on the N-terminus of UCP in vivo, which indicated that the N-terminus of UCP contains target lysines for polyubiquitination. The Lys76 residue of UCP was the most critical site for auto-ubiquitination, whereas the polyubiquitin chain formation on pVHL occurred on all three of its lysines (Lys159, Lys171 and Lys196). A UCP mutant in which Cys118 was changed to alanine (UCPC118A) did not form a polyubiquitin chain but did strongly accumulate mono- and di-ubiquitin via auto-ubiquitination. Polyubiquitin chain formation required the coordination of Cys95 and Cys118 between two interacting molecules. The mechanism of the polyubiquitin chain reaction of UCP may involve the transfer of ubiquitin from Cys95 to Cys118 by trans-thiolation, with polyubiquitin chains forming at Cys118 by reversible thioester bonding. The polyubiquitin chains are then moved to the lysine residues of the substrate by irreversible isopeptide bonding. During the elongation of the ubiquitin chain, an active Cys118 residue is required in both parts of UCP, namely, the catalytic enzyme and the substrate. In conclusion, UCP possesses not only E2 ubiquitin conjugating enzyme activity but also E3 ubiquitin ligase activity, and Cys118 is critical for polyubiquitin chain formation.

  11. E2-EPF UCP Possesses E3 Ubiquitin Ligase Activity via Its Cysteine 118 Residue.

    Directory of Open Access Journals (Sweden)

    Jung Hwa Lim

    Full Text Available Here, we show that E2-EPF ubiquitin carrier protein (UCP elongated E3-independent polyubiquitin chains on the lysine residues of von Hippel-Lindau protein (pVHL and its own lysine residues both in vitro and in vivo. The initiation of the ubiquitin reaction depended on not only Lys11 linkage but also the Lys6, Lys48 and Lys63 residues of ubiquitin, which were involved in polyubiquitin chain formation on UCP itself. UCP self-association occurred through the UBC domain, which also contributed to the interaction with pVHL. The polyubiquitin chains appeared on the N-terminus of UCP in vivo, which indicated that the N-terminus of UCP contains target lysines for polyubiquitination. The Lys76 residue of UCP was the most critical site for auto-ubiquitination, whereas the polyubiquitin chain formation on pVHL occurred on all three of its lysines (Lys159, Lys171 and Lys196. A UCP mutant in which Cys118 was changed to alanine (UCPC118A did not form a polyubiquitin chain but did strongly accumulate mono- and di-ubiquitin via auto-ubiquitination. Polyubiquitin chain formation required the coordination of Cys95 and Cys118 between two interacting molecules. The mechanism of the polyubiquitin chain reaction of UCP may involve the transfer of ubiquitin from Cys95 to Cys118 by trans-thiolation, with polyubiquitin chains forming at Cys118 by reversible thioester bonding. The polyubiquitin chains are then moved to the lysine residues of the substrate by irreversible isopeptide bonding. During the elongation of the ubiquitin chain, an active Cys118 residue is required in both parts of UCP, namely, the catalytic enzyme and the substrate. In conclusion, UCP possesses not only E2 ubiquitin conjugating enzyme activity but also E3 ubiquitin ligase activity, and Cys118 is critical for polyubiquitin chain formation.

  12. Crystal structure of a plant albumin from Cicer arietinum (chickpea) possessing hemopexin fold and hemagglutination activity.

    Science.gov (United States)

    Sharma, Urvashi; Katre, Uma V; Suresh, C G

    2015-05-01

    Crystal structure of a reported PA2 albumin from Cicer arietinum shows that it belongs to hemopexin fold family, has four beta-propeller motifs and possesses hemagglutination activity, making it different from known legume lectins. A plant albumin (PA2) from Cicer arietinum, presumably a lectin (CAL) owing to its hemagglutination activity which is inhibited by complex sugars as well as glycoproteins such as fetuin, desialylated fetuin and fibrinogen. The three-dimensional structure of this homodimeric protein has been determined using X-ray crystallography at 2.2 Å in two crystal forms: orthorhombic (P21212) and trigonal (P3). The structure determined using molecular replacement method and refined in orthorhombic crystal form reached R-factors R free 22.6 % and R work 18.2 % and in trigonal form had 22.3 and 17.9 % in the resolution range of 20.0-2.2 and 35.3-2.2 Å, respectively. Interestingly, unlike the known legume lectin fold, the structure of this homodimeric hemagglutinin belonged to hemopexin fold that consisted of four-bladed β-propeller architecture. Each subunit has a central cavity forming a channel, inside of which is lined with hydrophobic residues. The channel also bears binding sites for ligands such as calcium, sodium and chloride ions, iodine atom in the case of iodine derivative and water molecules. However, none of these ligands seem important for the sugar recognition. No monosaccharide sugar specificity could be detected using hemagglutination inhibition. Chemical modification studies identified a potential sugar-binding site per subunit molecule. Comparison of C-alpha atom positions in subunit structures showed that the deviations between the two crystal forms were more with respect to blades I and IV. Differences also existed between subunits in two forms in terms of type and site of ligand binding.

  13. Vector correlation analysis for inelastic and reactive collisions between partners possessing spin and orbital angular momentum.

    Science.gov (United States)

    Balint-Kurti, Gabriel G; Vasyutinskii, Oleg S

    2009-12-31

    A general reactive collision of the type A + B --> C + D is considered where both the collision partners (A and B) or the products (C and D) may possess internal, i.e., spin, orbital or rotational, angular momenta. Compact expressions are derived using a rigorous quantum mechanical analysis for the angular momentum anisotropy of either of the products (C or D) arising from an initially polarized distribution of the reactant angular momentum. The angular momentum distribution of the product is expressed in terms of canonical spherical tensors multiplied by anisotropy-transforming coefficients c(K(i)q(k))(K)(K(r),L). These coefficients act as transformation coefficients between the angular momentum anisotropy of the reactants and that of the product. They are independent of scattering angle but depend on the details of the scattering dynamics. The relationship between the coefficients c(K(i)q(k))(K)(K(r),L) and the body-fixed scattering S matrix is given and the methodology for the quantum mechanical calculation of the anisotropy-transforming coefficients is clearly laid out. The anisotropy-transforming coefficients are amenable to direct experimental measurement in a similar manner to vector correlation and alignment parameters in photodissociation processes. A key aspect of the theory is the use of projections of both reactant and product angular momenta onto the product recoil vector direction. An important new conservation rule is revealed through the analysis, namely that if the state multipole for reactant angular momentum distribution has a projection q(k) onto the product recoil vector the state multipoles for the product angular momentum distribution all have this same projection. Expressions are also presented for the distribution of the product angular momentum when its components are evaluated relative to the space-fixed Z-axis. Notes with detailed derivations of all the formulas are available as Supporting Information.

  14. Model Additional Protocol

    International Nuclear Information System (INIS)

    Rockwood, Laura

    2001-01-01

    Since the end of the cold war a series of events has changed the circumstances and requirements of the safeguards system. The discovery of a clandestine nuclear weapons program in Iraq, the continuing difficulty in verifying the initial report of Democratic People's Republic of Korea upon entry into force of their safeguards agreement, and the decision of the South African Government to give up its nuclear weapons program and join the Treaty on the Non-Proliferation of Nuclear Weapons have all played a role in an ambitious effort by IAEA Member States and the Secretariat to strengthen the safeguards system. A major milestone in this effort was reached in May 1997 when the IAEA Board of Governors approved a Model Protocol Additional to Safeguards Agreements. The Model Additional Protocol was negotiated over a period of less than a year by an open-ended committee of the Board involving some 70 Member States and two regional inspectorates. The IAEA is now in the process of negotiating additional protocols, State by State, and implementing them. These additional protocols will provide the IAEA with rights of access to information about all activities related to the use of nuclear material in States with comprehensive safeguards agreements and greatly expanded physical access for IAEA inspectors to confirm or verify this information. In conjunction with this, the IAEA is working on the integration of these measures with those provided for in comprehensive safeguards agreements, with a view to maximizing the effectiveness and efficiency, within available resources, the implementation of safeguards. Details concerning the Model Additional Protocol are given. (author)

  15. Additive manufacturing of metals

    International Nuclear Information System (INIS)

    Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus

    2016-01-01

    Additive Manufacturing (AM), the layer-by layer build-up of parts, has lately become an option for serial production. Today, several metallic materials including the important engineering materials steel, aluminium and titanium may be processed to full dense parts with outstanding properties. In this context, the present overview article describes the complex relationship between AM processes, microstructure and resulting properties for metals. It explains the fundamentals of Laser Beam Melting, Electron Beam Melting and Laser Metal Deposition, and introduces the commercially available materials for the different processes. Thereafter, typical microstructures for additively manufactured steel, aluminium and titanium are presented. Special attention is paid to AM specific grain structures, resulting from the complex thermal cycle and high cooling rates. The properties evolving as a consequence of the microstructure are elaborated under static and dynamic loading. According to these properties, typical applications are presented for the materials and methods for conclusion.

  16. Additive manufactured serialization

    Science.gov (United States)

    Bobbitt, III, John T.

    2017-04-18

    Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

  17. On the co-variation between form and function of adnominal possessive modifiers in Dutch and English

    DEFF Research Database (Denmark)

    Rijkhoff, Jan

    2009-01-01

    in the noun phrase (section 3); a tentative explanation is given in section 4. The more general point this paper wants to make is that functional modifier categories like CLASSIFYING MODIFIER or QUALIFYING MODIFIER can be characterized in grammatical terms and, furthermore, that important grammatical...... that the remarkable variation in the grammatical properties of this possessive construction directly correlates with the kind of modifier function it has in the noun phrase. It is first shown that lexical possessive modifiers with van ‘of’ (“adnominal possessives” for short) are used to express most of the modifier...... functions recognized in a semantic, five-layered model of the noun phrase (section 2). I will then argue that the values for certain grammatical parameters (here subsumed under the labels MODIFICATION, PREDICATION, REFERENCE) correlate with the kind of modifier function the adnominal possessive has...

  18. The impact of possession on legality of mortgage registered on a building under construction: With case law

    Directory of Open Access Journals (Sweden)

    Vicković Tanja

    2016-01-01

    Full Text Available The expansion of the subject of a mortgage to buildings under construction is a considerable step forward in regulating mortgages. It is not possible to register ownership rights on buildings under construction. A person acquiring ownership does not have the possibility to protect his rights. Acquiring ownership rights to a building under construction is tied to possession. This is detrimental to the principle of publicity which in turn erodes the principle of reliance. Validity of the mortgage is tied to the possession over the mortgaged real estate at the time of its registration. Such position of the courts challenges the very essence of mortgage.

  19. BWR zinc addition Sourcebook

    International Nuclear Information System (INIS)

    Garcia, Susan E.; Giannelli, Joseph F.; Jarvis, Alfred J.

    2014-01-01

    Boiling Water Reactors (BWRs) have been injecting zinc into the primary coolant via the reactor feedwater system for over 25 years for the purpose of controlling primary system radiation fields. The BWR zinc injection process has evolved since the initial application at the Hope Creek Nuclear Station in 1986. Key transitions were from the original natural zinc oxide (NZO) to depleted zinc oxide (DZO), and from active zinc injection of a powdered zinc oxide slurry (pumped systems) to passive injection systems (zinc pellet beds). Zinc addition has continued through various chemistry regimes changes, from normal water chemistry (NWC) to hydrogen water chemistry (HWC) and HWC with noble metals (NobleChem™) for mitigation of intergranular stress corrosion cracking (IGSCC) of reactor internals and primary system piping. While past reports published by the Electric Power Research Institute (EPRI) document specific industry experience related to these topics, the Zinc Sourcebook was prepared to consolidate all of the experience gained over the past 25 years. The Zinc Sourcebook will benefit experienced BWR Chemistry, Operations, Radiation Protection and Engineering personnel as well as new people entering the nuclear power industry. While all North American BWRs implement feedwater zinc injection, a number of other BWRs do not inject zinc. This Sourcebook will also be a valuable resource to plants considering the benefits of zinc addition process implementation, and to gain insights on industry experience related to zinc process control and best practices. This paper presents some of the highlights from the Sourcebook. (author)

  20. Origanum vulgare mediated green synthesis of biocompatible gold nanoparticles simultaneously possessing plasmonic, antioxidant and antimicrobial properties

    Directory of Open Access Journals (Sweden)

    Benedec D

    2018-02-01

    Full Text Available Daniela Benedec,1,* Ilioara Oniga,1,* Flavia Cuibus,1 Bogdan Sevastre,2 Gabriela Stiufiuc,3 Mihaela Duma,4 Daniela Hanganu,1 Cristian Iacovita,1 Rares Stiufiuc,1,5 Constantin Mihai Lucaciu1 1Faculty of Pharmacy, “Iuliu Haţieganu” University of Medicine and Pharmacy, 2Faculty of Veterinary Medicine, University of Agricultural Sciences and Veterinary Medicine, 3Faculty of Physics, “Babeş Bolyai” University, 4State Veterinary Laboratory for Animal Health and Safety, 5Department of Bionanoscopy, MedFuture Research Center for Advance Medicine, “Iuliu Haţieganu” University of Medicine and Pharmacy, Cluj-Napoca, Romania *These authors contributed equally to this work Purpose: The leaves and flowering stem of Origanum vulgare contain essential oils, flavonoids, phenolic acids and anthocyanins. We propose a new, simple, one-pot, O. vulgare extract (OVE mediated green synthesis method of biocompatible gold nanoparticles (AuNPs possessing improved antioxidant, antimicrobial and plasmonic properties.Materials and methods: Different concentrations of OVEs were used to reduce gold ions and to synthetize biocompatible spherical AuNPs. Their morphology and physical properties have been investigated by means of transmission electron microscopy, ultraviolet–visible absorption spectroscopy, photon correlation spectroscopy and Fourier transform infrared spectroscopy, whereas their plasmonic properties have been tested using surface-enhanced Raman spectroscopy (SERS. The antioxidant properties of nanoparticles (NPs have been evaluated by 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay, and the antimicrobial tests were performed using the disk diffusion assay. Their cytotoxicity has been assessed by means of 3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide assay.Results: The experimental results confirmed the successful synthesis of biocompatible, spherical, plasmonic NPs having a mean diameter of ~40 nm and an outstanding aqueous

  1. Teardrop bladder: additional considerations

    International Nuclear Information System (INIS)

    Wechsler, R.J.; Brennan, R.E.

    1982-01-01

    Nine cases of teardrop bladder (TDB) seen at excretory urography are presented. In some of these patients, the iliopsoas muscles were at the upper limit of normal in size, and additional evaluation of the perivesical structures with computed tomography (CT) was necessary. CT demonstrated only hypertrophied muscles with or without perivesical fat. The psoas muscles and pelvic width were measured in 8 patients and compared with the measurements of a control group of males without TDB. Patients with TDB had large iliopsoas muscles and narrow pelves compared with the control group. The psoas muscle width/pelvic width ratio was significantly greater (p < 0.0005) in patients with TDB than in the control group, with values of 1.04 + 0.05 and 0.82 + 0.09, respectively. It is concluded that TDB is not an uncommon normal variant in black males. Both iliopsoas muscle hypertrophy and a narrow pelvis are factors that predispose a patient to TDB

  2. Sewage sludge additive

    Science.gov (United States)

    Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

    1980-01-01

    The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

  3. Isovanillin derived N-(un)substituted hydroxylamines possessing an ortho-allylic group: valuable precursors to bioactive N-heterocycles.

    Science.gov (United States)

    Dulla, Balakrishna; Tangellamudi, Neelima D; Balasubramanian, Sridhar; Yellanki, Swapna; Medishetti, Raghavender; Kumar Banote, Rakesh; Hari Chaudhari, Girish; Kulkarni, Pushkar; Iqbal, Javed; Reiser, Oliver; Pal, Manojit

    2014-04-28

    The intramolecular 1,3-dipolar cycloaddition of isovanillin derived N-aryl hydroxylamines possessing ortho-allylic dipolarophiles affords novel benzo analogues of tricyclic isoxazolidines that can be readily transformed into functionalized lactams, γ-aminoalcohols and oxazepines. The corresponding N-unsubstituted hydroxylamines give rise to tetrahydroisoquinolines. Anxiogenic properties of these compounds are tested in zebra fish.

  4. Love and Art Strike Back: A.S. Byatt’s Possession: A Romance

    DEFF Research Database (Denmark)

    Mogensen, Tine Engel

    2004-01-01

    Possession can be seen as an enactment of the conflicts between a number of powerful - and quite classic - extremes (anatomy-romance, intellectual experience-sensuous experience, theory-art, reason-love, irony-pathos), which, in the aesthetic experience of the reader, it overcomes and transcends....

  5. Children enacting idioms of witchcraft and spirit possession as a response to trauma: therapeutically beneficial, and for whom?

    NARCIS (Netherlands)

    Reis, R.

    2013-01-01

    This article examines children’s enactment of spirit possession idioms and witchcraft in Africa including the meanings such idioms provide and the local healing resources they mobilize. Idioms of haunting spirits in Northern Uganda and witch-children elsewhere in Africa can be interpreted as

  6. Draft Genome Sequence of Methyloferula stellata AR4, an Obligate Methanotroph Possessing Only a Soluble Methane Monooxygenase.

    Science.gov (United States)

    Dedysh, Svetlana N; Naumoff, Daniil G; Vorobev, Alexey V; Kyrpides, Nikos; Woyke, Tanja; Shapiro, Nicole; Crombie, Andrew T; Murrell, J Colin; Kalyuzhnaya, Marina G; Smirnova, Angela V; Dunfield, Peter F

    2015-03-05

    Methyloferula stellata AR4 is an aerobic acidophilic methanotroph, which, in contrast to most known methanotrophs but similar to Methylocella spp., possesses only a soluble methane monooxygenase. However, it differs from Methylocella spp. by its inability to grow on multicarbon substrates. Here, we report the draft genome sequence of this bacterium. Copyright © 2015 Dedysh et al.

  7. Draft Genome Sequence of Methyloferula stellata AR4, an Obligate Methanotroph Possessing Only a Soluble Methane Monooxygenase

    OpenAIRE

    Dedysh, Svetlana N.; Naumoff, Daniil G.; Vorobev, Alexey V.; Kyrpides, Nikos; Woyke, Tanja; Shapiro, Nicole; Crombie, Andrew T.; Murrell, J. Colin; Kalyuzhnaya, Marina G.; Smirnova, Angela V.; Dunfield, Peter F.

    2015-01-01

    Methyloferula stellata AR4 is an aerobic acidophilic methanotroph, which, in contrast to most known methanotrophs but similar to Methylocella spp., possesses only a soluble methane monooxygenase. However, it differs from Methylocella spp. by its inability to grow on multicarbon substrates. Here, we report the draft genome sequence of this bacterium.

  8. Reactive, anxious and possessive forms of jealousy and their relation to relationship quality among heterosexuals and homosexuals

    NARCIS (Netherlands)

    Barelds, Dick P. H.; Dijkstra, Pieternel

    2006-01-01

    The present study examined the relationship between relational quality and three different types of jealousy-reactive, anxious and possessive jealousy. The sample consisted of 76 gay men, 79 lesbians, 70 heterosexual women and 70 heterosexual men. Findings show that different types of jealousy

  9. Assessing the Degree of Possessing Study Skills by the Students of Tafila Technical University from Their Perspectives

    Science.gov (United States)

    Al-Roud, Atallah A.; Thawabiah, Ahmad

    2016-01-01

    The study aimed to identify the degree of possessing study skills (SS) by the students of Tafila Technical (TTU) University from their perspectives. The population of the study consisted of 5015 students in TTU for the second semester of the academic year 2015/2016. The sample of the study was chosen randomly from the population of the study with…

  10. 76 FR 59271 - Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for Certain Migratory Game Birds

    Science.gov (United States)

    2011-09-26

    ...-0014; 91200-1231-9BPP-L2] RIN 1018-AX34 Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for Certain Migratory Game Birds AGENCY: Fish and Wildlife Service, Interior. ACTION: Final rule... of migratory birds is prohibited unless specifically provided for by annual regulations. This rule...

  11. The attributive possessive in Moroccan Arabic spoken by young bilinguals in the Netherlands and their peers in Morocco

    NARCIS (Netherlands)

    Boumans, L.P.C.

    2006-01-01

    Quantitative evidence shows that the use of the SG in MA depends on the lexical item that heads the possessive, while it is more frequent with pronominal dependents. The AG is used more in Tangier than in Casablanca, Rabat or Oujda, and this is true for both pronominal and NP dependents. Immigrants'

  12. 76 FR 54657 - Migratory Bird Hunting; Early Seasons and Bag and Possession Limits for Certain Migratory Game...

    Science.gov (United States)

    2011-09-01

    ... Migratory Game Birds in the Contiguous United States, Alaska, Hawaii, Puerto Rico, and the Virgin Islands... Bag and Possession Limits for Certain Migratory Game Birds in the Contiguous United States, Alaska...; migratory game birds in Alaska, Hawaii, Puerto Rico, and the Virgin Islands; and some extended falconry...

  13. 78 FR 53199 - Migratory Bird Hunting; Early Seasons and Bag and Possession Limits for Certain Migratory Game...

    Science.gov (United States)

    2013-08-28

    ... Migratory Game Birds in the Contiguous United States, Alaska, Hawaii, Puerto Rico, and the Virgin Islands... Seasons and Bag and Possession Limits for Certain Migratory Game Birds in the Contiguous United States... seasons; migratory game birds in Alaska, Hawaii, Puerto Rico, and the Virgin Islands; youth waterfowl day...

  14. 77 FR 53751 - Migratory Bird Hunting; Early Seasons and Bag and Possession Limits for Certain Migratory Game...

    Science.gov (United States)

    2012-08-31

    ... Migratory Game Birds in the Contiguous United States, Alaska, Hawaii, Puerto Rico, and the Virgin Islands... Seasons and Bag and Possession Limits for Certain Migratory Game Birds in the Contiguous United States... seasons; migratory game birds in Alaska, Hawaii, Puerto Rico, and the Virgin Islands; youth waterfowl day...

  15. Wider application of additions in self-compacting concrete

    OpenAIRE

    Liu, M.

    2009-01-01

    Compared to normally vibrated concrete (NVC), self-compacting concrete (SCC) possesses enhanced qualities and improves productivity and working conditions due to the elimination of compaction. SCC generally has a higher powder content than NVC and thus it is necessary to replace some of the cement by additions to achieve an economical and durable concrete. The established benefits of using low volumes of fly ash in SCC, high volumes of fly ash in NVC and the search for uses ...

  16. Additive lattice kirigami.

    Science.gov (United States)

    Castle, Toen; Sussman, Daniel M; Tanis, Michael; Kamien, Randall D

    2016-09-01

    Kirigami uses bending, folding, cutting, and pasting to create complex three-dimensional (3D) structures from a flat sheet. In the case of lattice kirigami, this cutting and rejoining introduces defects into an underlying 2D lattice in the form of points of nonzero Gaussian curvature. A set of simple rules was previously used to generate a wide variety of stepped structures; we now pare back these rules to their minimum. This allows us to describe a set of techniques that unify a wide variety of cut-and-paste actions under the rubric of lattice kirigami, including adding new material and rejoining material across arbitrary cuts in the sheet. We also explore the use of more complex lattices and the different structures that consequently arise. Regardless of the choice of lattice, creating complex structures may require multiple overlapping kirigami cuts, where subsequent cuts are not performed on a locally flat lattice. Our additive kirigami method describes such cuts, providing a simple methodology and a set of techniques to build a huge variety of complex 3D shapes.

  17. Additive Manufactured Superconducting Cavities

    Science.gov (United States)

    Holland, Eric; Rosen, Yaniv; Woolleet, Nathan; Materise, Nicholas; Voisin, Thomas; Wang, Morris; Mireles, Jorge; Carosi, Gianpaolo; Dubois, Jonathan

    Superconducting radio frequency cavities provide an ultra-low dissipative environment, which has enabled fundamental investigations in quantum mechanics, materials properties, and the search for new particles in and beyond the standard model. However, resonator designs are constrained by limitations in conventional machining techniques. For example, current through a seam is a limiting factor in performance for many waveguide cavities. Development of highly reproducible methods for metallic parts through additive manufacturing, referred to colloquially as 3D printing\\x9D, opens the possibility for novel cavity designs which cannot be implemented through conventional methods. We present preliminary investigations of superconducting cavities made through a selective laser melting process, which compacts a granular powder via a high-power laser according to a digitally defined geometry. Initial work suggests that assuming a loss model and numerically optimizing a geometry to minimize dissipation results in modest improvements in device performance. Furthermore, a subset of titanium alloys, particularly, a titanium, aluminum, vanadium alloy (Ti - 6Al - 4V) exhibits properties indicative of a high kinetic inductance material. This work is supported by LDRD 16-SI-004.

  18. Ionic liquids as lubricant additives: A review

    International Nuclear Information System (INIS)

    Zhou, Yan; Qu, Jun

    2016-01-01

    In pursuit of energy efficiency and durability throughout human history, advances in lubricants have always played important roles. Ionic liquids (ILs) are room-temperature molten salts that possess unique physicochemical properties and have shown great potential in many applications with lubrication as one of the latest. While earlier work (2001–2011) primarily explored the feasibility of using ILs as neat or base lubricants, using ILs as lubricant additives has become the new focal research topic since the breakthrough in ILs’ miscibility in nonpolar hydrocarbon oils in early 2012. This work reviews the recent advances in developing ILs as additives for lubrication with an attempt to correlate among the cationic and anionic structures, oil-solubility, and other relevant physicochemical properties, and lubricating behavior. Effects of the concentration of ILs in lubricants and the compatibility between ILs and other additives in the lubricant formulation on the tribological performance are described followed by a discussion of wear protection mechanism based on tribofilm characterization. As a result, future research directions are suggested at the end.

  19. Curcumin Encapsulated in Milk Exosomes Resists Human Digestion and Possesses Enhanced Intestinal Permeability in Vitro.

    Science.gov (United States)

    Vashisht, Monika; Rani, Payal; Onteru, Suneel Kumar; Singh, Dheer

    2017-11-01

    Exosomes, the extracellular secretary nano-vesicles, act as carriers of biomolecules to the target cells. They exhibit several attributes of an efficient drug delivery system. Curcumin, despite having numerous bioactive and therapeutic properties, has limited pharmaceutical use due to its poor water solubility, stability, and low systemic bioavailability. Hence, this study aims to enhance the therapeutic potential of curcumin, a model hydrophobic drug, by its encapsulation into milk exosomes. In the present study, we investigated the stability of free curcumin and exosomal curcumin in PBS and in vitro digestive processes. Additionally, their uptake and trans-epithelial transport were studied on Caco-2 cells. Curcumin in milk exosomes had higher stability in PBS, sustained harsh digestive processes, and crossed the intestinal barrier than free curcumin. In conclusion, the encapsulation of curcumin into the exosomes enhances its stability, solubility, and bioavailability. Therefore, the present study demonstrated that milk exosomes act as stable oral drug delivery vehicles.

  20. Human Innate Lymphoid Cell Subsets Possess Tissue-Type Based Heterogeneity in Phenotype and Frequency

    DEFF Research Database (Denmark)

    Simoni, Yannick; Fehlings, Michael; Kloverpris, Henrik N.

    2017-01-01

    Animal models have highlighted the importance of innate lymphoid cells (ILCs) in multiple immune responses. However, technical limitations have hampered adequate characterization of ILCs in humans. Here, we used mass cytometry including a broad range of surface markers and transcription factors...... to accurately identify and profile ILCs across healthy and inflamed tissue types. High dimensional analysis allowed for clear phenotypic delineation of ILC2 and ILC3 subsets. We were not able to detect ILC1 cells in any of the tissues assessed, however, we identified intra-epithelial (ie)ILC1-like cells...... that represent a broader category of NK cells in mucosal and non-mucosal pathological tissues. In addition, we have revealed the expression of phenotypic molecules that have not been previously described for ILCs. Our analysis shows that human ILCs are highly heterogeneous cell types between individuals...

  1. The AAA protein spastin possesses two levels of basal ATPase activity.

    Science.gov (United States)

    Fan, Xiangyu; Lin, Zhijie; Fan, Guanghui; Lu, Jing; Hou, Yongfei; Habai, Gulijiazi; Sun, Linyue; Yu, Pengpeng; Shen, Yuequan; Wen, Maorong; Wang, Chunguang

    2018-04-30

    The AAA ATPase spastin is a microtubule-severing enzyme that plays important roles in various cellular events including axon regeneration. Herein, we found that the basal ATPase activity of spastin is negatively regulated by spastin concentration. By determining a spastin crystal structure, we demonstrate the necessity of intersubunit interactions between spastin AAA domains. Neutralization of the positive charges in the microtubule-binding domain (MTBD) of spastin dramatically decreases the ATPase activity at low concentration, although the ATP-hydrolyzing potential is not affected. These results demonstrate that, in addition to the AAA domain, the MTBD region of spastin is also involved in regulating ATPase activity, making interactions between spastin protomers more complicated than expected. © 2018 Federation of European Biochemical Societies.

  2. Novel Wolbachia-transinfected Aedes aegypti mosquitoes possess diverse fitness and vector competence phenotypes.

    Directory of Open Access Journals (Sweden)

    Johanna E Fraser

    2017-12-01

    Full Text Available Wolbachia pipientis from Drosophila melanogaster (wMel is an endosymbiotic bacterium that restricts transmission of human pathogenic flaviviruses and alphaviruses, including dengue, Zika, and chikungunya viruses, when introduced into the mosquito vector Aedes aegypti. To date, wMel-infected Ae. aegypti have been released in field trials in 5 countries to evaluate the effectiveness of this strategy for disease control. Despite the success in establishing wMel-infected mosquitoes in wild populations, and the well-characterized antiviral capabilities of wMel, transinfecting different or additional Wolbachia strains into Ae. aegypti may improve disease impact, and perhaps more importantly, could provide a strategy to account for the possible evolution of resistant arboviruses. Here, we report the successful transinfection of Ae. aegypti with the Wolbachia strains wMelCS (D. melanogaster, wRi (D. simulans and wPip (Culex quinquefasciatus and assess the effects on Ae. aegypti fitness, cytoplasmic incompatibility, tissue tropism and pathogen blocking in a laboratory setting. The results demonstrate that wMelCS provides a similar degree of protection against dengue virus as wMel following an infectious blood meal, and significantly reduces viral RNA levels beyond that of wMel following a direct challenge with infectious virus in mosquitoes, with no additional fitness cost to the host. The protection provided by wRi is markedly weaker than that of wMelCS, consistent with previous characterisations of these lines in Drosophila, while wPip was found to substantially reduce the fitness of Ae. aegypti. Thus, we determine wMelCS as a key candidate for further testing in field-relevant fitness tests and viremic blood feeding challenges in a clinical setting to determine if it may represent an alternative Wolbachia strain with more desirable attributes than wMel for future field testing.

  3. Novel Wolbachia-transinfected Aedes aegypti mosquitoes possess diverse fitness and vector competence phenotypes.

    Science.gov (United States)

    Fraser, Johanna E; De Bruyne, Jyotika Taneja; Iturbe-Ormaetxe, Iñaki; Stepnell, Justin; Burns, Rhiannon L; Flores, Heather A; O'Neill, Scott L

    2017-12-01

    Wolbachia pipientis from Drosophila melanogaster (wMel) is an endosymbiotic bacterium that restricts transmission of human pathogenic flaviviruses and alphaviruses, including dengue, Zika, and chikungunya viruses, when introduced into the mosquito vector Aedes aegypti. To date, wMel-infected Ae. aegypti have been released in field trials in 5 countries to evaluate the effectiveness of this strategy for disease control. Despite the success in establishing wMel-infected mosquitoes in wild populations, and the well-characterized antiviral capabilities of wMel, transinfecting different or additional Wolbachia strains into Ae. aegypti may improve disease impact, and perhaps more importantly, could provide a strategy to account for the possible evolution of resistant arboviruses. Here, we report the successful transinfection of Ae. aegypti with the Wolbachia strains wMelCS (D. melanogaster), wRi (D. simulans) and wPip (Culex quinquefasciatus) and assess the effects on Ae. aegypti fitness, cytoplasmic incompatibility, tissue tropism and pathogen blocking in a laboratory setting. The results demonstrate that wMelCS provides a similar degree of protection against dengue virus as wMel following an infectious blood meal, and significantly reduces viral RNA levels beyond that of wMel following a direct challenge with infectious virus in mosquitoes, with no additional fitness cost to the host. The protection provided by wRi is markedly weaker than that of wMelCS, consistent with previous characterisations of these lines in Drosophila, while wPip was found to substantially reduce the fitness of Ae. aegypti. Thus, we determine wMelCS as a key candidate for further testing in field-relevant fitness tests and viremic blood feeding challenges in a clinical setting to determine if it may represent an alternative Wolbachia strain with more desirable attributes than wMel for future field testing.

  4. Estragole and methyl-eugenol-free extract of Artemisia dracunculus possesses immunomodulatory effects

    Directory of Open Access Journals (Sweden)

    Seyyed Meysam Abtahi Froushani

    2016-08-01

    Full Text Available Objective: Some evidence suggests that chronic uptake of estragole and methyl-eugenol, found in the essential oil of Artemisia dracunculus (tarragon, may be associated with an increased risk of hepato-carcinogenicity. The present study was conducted to investigate the immumodulatory and anti-inflammatory potentials of estragole and methyl-eugenol free extract of tarragon. Materials and Methods: Aqueous, hydroalcoholic, methanol and hexane extracts of dried and milled tarragon was prepared and analyzed by GC-MS. The estragole and methyl-eugenol free extract was characterized and used for evaluation of immunity in NMRI mice after challenging with sheep red blood cells. Results: It was shown that the aqueous extract of tarragon was free from potentially harmful estragole or methyl-eugenol. Moreover, the immunomodulatory effect of the aqueous extract of tarragon (100 mg/kg for 21 consecutive days was investigated. The extract significantly increased the level of anti-sheep red blood cells (SRBC (antibody and simultaneously decreased the level of cellular immunity in the treatment group. Moreover, tarragon caused a significant reduction in the production of pro-inflammatory IL-17 and IFN-γ in parallel with a reduction in the ratio of INF-γ to Il-10 or IL-17 to IL-10 in the splenocytes. In addition, the levels of the respiratory burst and nitric oxide production in peritoneal macrophages were significantly decreased. Additionally, the phagocytosis potential of macrophages was significantly increased in treated mice. Conclusion: These data showed that the aqueous extract of tarragon may be used as a natural source to modulate the immune system, because it can inhibit pro-inflammatory cytokines and induce anti-inflammatory macrophages.

  5. 77 FR 58627 - Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for Certain Migratory Game Birds

    Science.gov (United States)

    2012-09-21

    ... Service 50 CFR Part 20 Migratory Bird Hunting; Late Seasons and Bag and Possession Limits for Certain Migratory Game Birds; Final Rule #0;#0;Federal Register / Vol. 77 , No. 184 / Friday, September 21, 2012... Part 20 [Docket No. FWS-R9-MB-2012-0005; FF09M21200-123-FXMB1231099BPP0L2] RIN 1018-AX97 Migratory Bird...

  6. Synthesis of Ethylene or Propylene/1,3-Butadiene Copolymers Possessing Pendant Vinyl Groups with Virtually No Internal Olefins

    OpenAIRE

    Kenji Michiue; Makoto Mitani; Terunori Fujita

    2015-01-01

    In general, ethylene/1,3-butadiene copolymerizations provides copolymers possessing both pendant vinyls and vinylenes as olefinic moieties. We, at MCI, studied the substituent effects of C2-symmetric zirconocene complexes, rac-[Me2Si(Indenyl’)2]ZrCl2 (Indenyl’ = generic substituted indenyl), after activation on the ratio of the pendant vinyls and vinylenes of the resultant copolymers. Complexes examined in this study were rac-dimethylsilylbis (1-indenyl)zirconium dichloride (1), rac-dimethyls...

  7. The law on the streets: Evaluating the impact of Mexico's drug decriminalization reform on drug possession arrests in Tijuana, Mexico.

    Science.gov (United States)

    Arredondo, J; Gaines, T; Manian, S; Vilalta, C; Bañuelos, A; Strathdee, S A; Beletsky, L

    2018-04-01

    In 2009, Mexican Federal Government enacted "narcomenudeo" reforms decriminalizing possession of small amounts of drugs, delegating prosecution of retail drug sales to the state courts, and mandating treatment diversion for habitual drug users. There has been insufficient effort to formally assess the decriminalization policy's population-level impact, despite mounting interest in analagous reforms across the globe. Using a dataset of municipal police incident reports, we examined patterns of drug possession, and violent and non-violent crime arrests between January 2009 and December 2014. A hierarchical panel data analysis with random effects was conducted to assess the impact of narcomenudeo's drug decriminalization provision. The reforms had no significant impact on the number of drug possession or violent crime arrests, after controlling for other variables (e.g. time trends, electoral cycles, and precinct-level socioeconomic factors). Time periods directly preceding local elections were observed to be statistically associated with elevated arrest volume. Analysis of police statistics parallel prior findings that Mexico's reform decriminalizing small amounts of drugs does not appear to have significantly shifted drug law enforcement in Tijuana. More research is required to fully understand the policy transformation process for drug decriminalization and other structural interventions in Mexico and similar regional and international efforts. Observed relationship between policing and political cycles echo associations in other settings whereby law-and-order activities increase during mayoral electoral campaigns. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Possessão e inversão da subalternidade: com a palavra, Pombagira das Rosas

    Directory of Open Access Journals (Sweden)

    Sônia Regina Corrêa Lages

    2012-01-01

    Full Text Available Este artigo é decorrente de uma pesquisa de campo que analisou a possessão na religião afro-brasileira da Umbanda no terreiro de Umbanda Caboclo Pena Branca, na cidade de Juiz de Fora, MG. No presente recorte é apresentada a narrativa da Pombagira das Rosas, com o propósito de observar a relação de alteridade que se estabelece entre a médium e a entidade. A partir de um quadro conceitual definido por Michael De Certeau, as narrativas são analisadas buscando compreender de que forma a possessão se articula com a realidade histórica das mulheres no Brasil e com a trajetória pessoal da mulher médium que incorpora o referido espírito, redefinindo seu cotidiano. A intenção é focalizar na voz subalterna da entidade as dinâmicas individuais e coletivas que, fazendo uso do imaginário nacional sobre a entidade, possibilitam compreender a possessão como significando solidariedade social.

  9. Reaction of Non-Symmetric Schiff Base Metallo-Ligand Complexes Possessing an Oxime Function with Ln Ions

    Directory of Open Access Journals (Sweden)

    Jean-Pierre Costes

    2018-03-01

    Full Text Available The preparation of non-symmetric Schiff base ligands possessing one oxime function that is associated to a second function such as pyrrole or phenol function is first described. These ligands, which possess inner N4 or N3O coordination sites, allow formation of cationic or neutral non-symmetric CuII or NiII metallo-ligand complexes under their mono- or di-deprotonated forms. In presence of Lanthanide ions the neutral complexes do not coordinate to the LnIII ions, the oxygen atom of the oxime function being only hydrogen-bonded to a water molecule that is linked to the LnIII ion. This surprising behavior allows for the isolation of LnIII ions by non-interacting metal complexes. Reaction of cationic NiII complexes possessing a protonated oxime function with LnIII ions leads to the formation of original and dianionic (Gd(NO352− entities that are well separated from each other. This work highlights the preparation of well isolated mononuclear LnIII entities into a matrix of diamagnetic metal complexes. These new complexes complete our previous work dealing with the complexing ability of the oxime function toward Lanthanide ions. It could open the way to the synthesis of new entities with interesting properties, such as single-ion magnets for example.

  10. A Comparison of Self-reported Medication Adherence to Concordance Between Part D Claims and Medication Possession.

    Science.gov (United States)

    Savitz, Samuel T; Stearns, Sally C; Zhou, Lei; Thudium, Emily; Alburikan, Khalid A; Tran, Richard; Rodgers, Jo E

    2017-05-01

    Medicare Part D claims indicate medication purchased, but people who are not fully adherent may extend prescription use beyond the interval prescribed. This study assessed concordance between Part D claims and medication possession at a study visit in relation to self-reported medication adherence. We matched Part D claims for 6 common medications to medications brought to a study visit in 2011-2013 for the Atherosclerosis Risk in Communities study. The combined data consisted of 3027 medication events (claims, medications possessed, or both) for 2099 Atherosclerosis Risk in Communities study participants. Multinomial logistic regression estimated the association of concordance (visit only, Part D only, or both) with self-reported medication adherence while controlling for sociodemographic characteristics, veteran status, and availability under Generic Drug Discount Programs. Relative to participants with high adherence, medication events for participants with low adherence were approximately 25 percentage points less likely to match and more likely to be visit only (PDiscount Programs were 3 percentage points more likely to be visit only. Part D claims were substantially less likely to be concordant with medications possessed at study visit for participants with low self-reported adherence. This result supports the construction of adherence proxies such as proportion days covered using Part D claims.

  11. Mitochondria from rat uterine smooth muscle possess ATP-sensitive potassium channel

    Directory of Open Access Journals (Sweden)

    Olga B. Vadzyuk

    2018-03-01

    Full Text Available The objective of this study was to detect ATP-sensitive K+ uptake in rat uterine smooth muscle mitochondria and to determine possible effects of its activation on mitochondrial physiology. By means of fluorescent technique with usage of K+-sensitive fluorescent probe PBFI (potassium-binding benzofuran isophthalate we showed that accumulation of K ions in isolated mitochondria from rat myometrium is sensitive to effectors of KATP-channel (ATP-sensitive K+-channel – ATP, diazoxide, glibenclamide and 5HD (5-hydroxydecanoate. Our data demonstrates that K+ uptake in isolated myometrium mitochondria results in a slight decrease in membrane potential, enhancement of generation of ROS (reactive oxygen species and mitochondrial swelling. Particularly, the addition of ATP into incubation medium led to a decrease in mitochondrial swelling and ROS production, and an increase in membrane potential. These effects were eliminated by diazoxide. If blockers of KATP-channel were added along with diazoxide, the effects of diazoxide were removed. So, we postulate the existence of KATP-channels in rat uterus mitochondria and assume that their functioning may regulate physiological conditions of mitochondria, such as matrix volume, ROS generation and polarization of mitochondrial membrane. Keywords: ATP-sensitive potassium channel, Diazoxide, 5-hydroxydecanoate, Myometrium, Mitochondria, Mitochondrial swelling, Mitochondrial membrane potential, ROS

  12. Alpha-momorcharin: a ribosome-inactivating protein from Momordica charantia, possessing DNA cleavage properties.

    Science.gov (United States)

    Wang, Shuzhen; Zheng, Yinzhen; Yan, Junjie; Zhu, Zhixuan; Wu, Zhihua; Ding, Yi

    2013-11-01

    Ribosome-inactivating proteins (RIPs) function to inhibit protein synthesis through the removal of specific adenine residues from eukaryotic ribosomal RNA and rending the 60S subunit unable to bind elongation factor 2. They have received much attention in biological and biomedical research due to their unique activities toward tumor cells, as well as the important roles in plant defense. Alpha-momorcharin (α-MC), a member of the type I family of RIPs, is rich in the seeds of Momordica charantia L. Previous studies demonstrated that α-MC is an effective antifungal and antibacterial protein. In this study, a detailed analysis of the DNase-like activity of α-MC was conducted. Results showed that the DNase-like activity toward plasmid DNA was time-dependent, temperature-related, and pH-stable. Moreover, a requirement for divalent metal ions in the catalytic domain of α-MC was confirmed. Additionally, Tyr(93) was found to be a critical residue for the DNase-like activity, while Tyr(134), Glu(183), Arg(186), and Trp(215) were activity-related residues. This study on the chemico-physical properties and mechanism of action of α-MC will improve its utilization in scientific research, as well as its potential industrial uses. These results may also assist in the characterization and elucidation of the DNase-like enzymatic properties of other RIPs.

  13. When Love Meets Money: Priming the Possession of Money Influences Mating Strategies

    Science.gov (United States)

    Li, Yi Ming; Li, Jian; Chan, Darius K.-S.; Zhang, Bo

    2016-01-01

    Money is an important factor that influences the development of romantic relationships. The current paper examines how the feeling of having relatively more or less money influences human mating strategies in long-term and short-term mating contexts under the framework of evolutionary psychology. We recruited mainland Chinese college students involved in steady, heterosexual romantic relationships to participate in two experiments. In each study, we experimentally triggered participants' feelings of having relatively more or less money and then examined their thoughts and behaviors related to mating. Results of Study 1 showed that men who were primed to feel that they had relatively more money were less satisfied with their partners' physical attractiveness than those primed to feel that they had less money, suggesting that the subjective feeling of having more or less money may affect men's preferences regarding the physical appearance of a mate in a long-term relationship. Interestingly, this difference was not significant for women. Results of Study 2 indicated that both men and women who were primed to feel that they had relatively more money exhibited a greater “behavioral approach tendency” toward an attractive member of the opposite sex than those primed to feel that they had less money. This finding suggests that people who feel they have relatively more money may have more interest in an attractive alternative than those who feel they have relatively less money. The differences in mating strategies between and within the genders brought about by money support the evolutionary hypothesis that individuals adopt conditional mating strategies in response to environmental conditions. Additionally, the results of experimental studies provide evidence for the causal effects of money on mating strategies. These findings have both conceptual and practical implications for the psychology of evolution and romantic relationships. PMID:27047415

  14. When Love Meets Money: Priming the Possession of Money Influences Mating Strategies.

    Science.gov (United States)

    Li, Yi Ming; Li, Jian; Chan, Darius K-S; Zhang, Bo

    2016-01-01

    Money is an important factor that influences the development of romantic relationships. The current paper examines how the feeling of having relatively more or less money influences human mating strategies in long-term and short-term mating contexts under the framework of evolutionary psychology. We recruited mainland Chinese college students involved in steady, heterosexual romantic relationships to participate in two experiments. In each study, we experimentally triggered participants' feelings of having relatively more or less money and then examined their thoughts and behaviors related to mating. Results of Study 1 showed that men who were primed to feel that they had relatively more money were less satisfied with their partners' physical attractiveness than those primed to feel that they had less money, suggesting that the subjective feeling of having more or less money may affect men's preferences regarding the physical appearance of a mate in a long-term relationship. Interestingly, this difference was not significant for women. Results of Study 2 indicated that both men and women who were primed to feel that they had relatively more money exhibited a greater "behavioral approach tendency" toward an attractive member of the opposite sex than those primed to feel that they had less money. This finding suggests that people who feel they have relatively more money may have more interest in an attractive alternative than those who feel they have relatively less money. The differences in mating strategies between and within the genders brought about by money support the evolutionary hypothesis that individuals adopt conditional mating strategies in response to environmental conditions. Additionally, the results of experimental studies provide evidence for the causal effects of money on mating strategies. These findings have both conceptual and practical implications for the psychology of evolution and romantic relationships.

  15. Mesobuthus Venom-Derived Antimicrobial Peptides Possess Intrinsic Multifunctionality and Differential Potential as Drugs

    Directory of Open Access Journals (Sweden)

    Bin Gao

    2018-02-01

    Full Text Available Animal venoms are a mixture of peptides and proteins that serve two basic biological functions: predation and defense against both predators and microbes. Antimicrobial peptides (AMPs are a common component extensively present in various scorpion venoms (herein abbreviated as svAMPs. However, their roles in predation and defense against predators and potential as drugs are poorly understood. Here, we report five new venom peptides with antimicrobial activity from two Mesobuthus scorpion species. These α-helical linear peptides displayed highly bactericidal activity toward all the Gram-positive bacteria used here but differential activity against Gram-negative bacteria and fungi. In addition to the antibiotic activity, these AMPs displayed lethality to houseflies and hemotoxin-like toxicity on mice by causing hemolysis, tissue damage and inducing inflammatory pain. Unlike AMPs from other origins, these venom-derived AMPs seem to be unsuitable as anti-infective drugs due to their high hemolysis and low serum stability. However, MeuTXKβ1, a known two-domain Mesobuthus AMP, is an exception since it exhibits high activity toward antibiotic resistant Staphylococci clinical isolates with low hemolysis and high serum stability. The findings that the classical AMPs play predatory and defensive roles indicate that the multifunctionality of scorpion venom components is an intrinsic feature likely evolved by natural selection from microbes, prey and predators of scorpions. This definitely provides an excellent system in which one can study how a protein adaptively evolves novel functions in a new environment. Meantimes, new strategies are needed to remove the toxicity of svAMPs on eukaryotic cells when they are used as leads for anti-infective drugs.

  16. Mycobacterium tuberculosis UvrB Is a Robust DNA-Stimulated ATPase That Also Possesses Structure-Specific ATP-Dependent DNA Helicase Activity.

    Science.gov (United States)

    Thakur, Manoj; Kumar, Mohan B J; Muniyappa, K

    2016-10-18

    Much is known about the Escherichia coli nucleotide excision repair (NER) pathway; however, very little is understood about the proteins involved and the molecular mechanism of NER in mycobacteria. In this study, we show that Mycobacterium tuberculosis UvrB (MtUvrB), which exists in solution as a monomer, binds to DNA in a structure-dependent manner. A systematic examination of MtUvrB substrate specificity reveals that it associates preferentially with single-stranded DNA, duplexes with 3' or 5' overhangs, and linear duplex DNA with splayed arms. Whereas E. coli UvrB (EcUvrB) binds weakly to undamaged DNA and has no ATPase activity, MtUvrB possesses intrinsic ATPase activity that is greatly stimulated by both single- and double-stranded DNA. Strikingly, we found that MtUvrB, but not EcUvrB, possesses the DNA unwinding activity characteristic of an ATP-dependent DNA helicase. The helicase activity of MtUvrB proceeds in the 3' to 5' direction and is strongly modulated by a nontranslocating 5' single-stranded tail, indicating that in addition to the translocating strand it also interacts with the 5' end of the substrate. The fraction of DNA unwound by MtUvrB decreases significantly as the length of the duplex increases: it fails to unwind duplexes longer than 70 bp. These results, on one hand, reveal significant mechanistic differences between MtUvrB and EcUvrB and, on the other, support an alternative role for UvrB in the processing of key DNA replication intermediates. Altogether, our findings provide insights into the catalytic functions of UvrB and lay the foundation for further understanding of the NER pathway in M. tuberculosis.

  17. Paracoccus denitrificans possesses two BioR homologs having a role in regulation of biotin metabolism.

    Science.gov (United States)

    Feng, Youjun; Kumar, Ritesh; Ravcheev, Dmitry A; Zhang, Huimin

    2015-08-01

    Recently, we determined that BioR, the GntR family of transcription factor, acts as a repressor for biotin metabolism exclusively distributed in certain species of α-proteobacteria, including the zoonotic agent Brucella melitensis and the plant pathogen Agrobacterium tumefaciens. However, the scenario is unusual in Paracoccus denitrificans, another closely related member of the same phylum α-proteobacteria featuring with denitrification. Not only does it encode two BioR homologs Pden_1431 and Pden_2922 (designated as BioR1 and BioR2, respectively), but also has six predictive BioR-recognizable sites (the two bioR homolog each has one site, whereas the two bio operons (bioBFDAGC and bioYB) each contains two tandem BioR boxes). It raised the possibility that unexpected complexity is present in BioR-mediated biotin regulation. Here we report that this is the case. The identity of the purified BioR proteins (BioR1 and BioR2) was confirmed with LC-QToF-MS. Phylogenetic analyses combined with GC percentage raised a possibility that the bioR2 gene might be acquired by horizontal gene transfer. Gel shift assays revealed that the predicted BioR-binding sites are functional for the two BioR homologs, in much similarity to the scenario seen with the BioR site of A. tumefaciens bioBFDAZ. Using the A. tumefaciens reporter system carrying a plasmid-borne LacZ fusion, we revealed that the two homologs of P. denitrificans BioR are functional repressors for biotin metabolism. As anticipated, not only does the addition of exogenous biotin stimulate efficiently the expression of bioYB operon encoding biotin transport/uptake system BioY, but also inhibits the transcription of the bioBFDAGC operon resembling the de novo biotin synthetic pathway. EMSA-based screening failed to demonstrate that the biotin-related metabolite is involved in BioR-DNA interplay, which is consistent with our former observation with Brucella BioR. Our finding defined a complex regulatory network for biotin

  18. Slow angled-descent forepaw grasping (SLAG): an innate behavioral task for identification of individual experimental mice possessing functional vision.

    Science.gov (United States)

    Gil-Pagés, Macarena; Stiles, Robert J; Parks, Christopher A; Neier, Steven C; Radulovic, Maja; Oliveros, Alfredo; Ferrer, Alejandro; Reed, Brendan K; Wilton, Katelynn M; Schrum, Adam G

    2013-08-23

    There is significant interest in the generation of improved assays to clearly identify experimental mice possessing functional vision, a property that could qualify mice for inclusion in behavioral and neuroscience studies. Widely employed current methods rely on mouse responses to visual cues in assays of reflexes, depth perception, or cognitive memory. However, commonly assessed mouse reflexes can sometimes be ambiguous in their expression, while depth perception assays are sometimes confounded by variation in anxiety responses and exploratory conduct. Furthermore, in situations where experimental groups vary in their cognitive memory capacity, memory assays may not be ideal for assessing differences in vision. We have optimized a non-invasive behavioral assay that relies on an untrained, innate response to identify individual experimental mice possessing functional vision: slow angled-descent forepaw grasping (SLAG). First, we verified that SLAG performance depends on vision and not olfaction. Next, all members of an age-ranged cohort of 158 C57BL/6 mice (57 wild-type, 101 knockout, age range 44-241 days) were assessed for functional vision using the SLAG test without training or conditioning. Subjecting the population to a second innate behavioral test, Dark Chamber preference, corroborated that the functional vision assessment of SLAG was valid. We propose that the SLAG assay is immediately useful to quickly and clearly identify experimental mice possessing functional vision. SLAG is based on a behavioral readout with a significant innate component with no requirement for training. This will facilitate the selection of mice of known sighted status in vision-dependent experiments that focus on other types of behavior, neuroscience, and/or cognitive memory.

  19. Pseudo-citations : présence/absence de l’hypotexte dans Possession de A.S. Byatt

    Directory of Open Access Journals (Sweden)

    Nathalie MARTINIÈRE

    2004-06-01

    Full Text Available Le roman de A.S. Byatt, Possession, peut être lu comme une variation, un exercice de style et de brio sur la notion de citation, puisqu’une partie essentielle consiste en pastiches de poèmes, lettres, biographie de deux personnages-écrivains de la période victorienne, qui sont censés être lus et cités au cours d’un processus universitaire de découverte et d’identification de leur relation par d’autres personnages contemporains. Mais le statut fictif de Ash et LaMotte est presque brouillé par ...

  20. Se soigner ou soigner les autres  ? Dimensions thérapeutiques d’un culte de possession vietnamien Healing Myself, Healing Others : Therapeutic Skills of a Vietnamese Possession Cult

    Directory of Open Access Journals (Sweden)

    Claire Chauvet

    2012-10-01

    Full Text Available Les médiums des esprits des Quatre Palais, en articulation avec d’autres spécialistes religieux, participent à l’espace thérapeutique vietnamien. Ils contribuent de longue date, et ce malgré les aléas de l’histoire, à prendre en charge les maladies par le biais de la pratique rituelle et, plus généralement, par le biais des interventions des esprits. Si ces dimensions thérapeutiques ne constituent qu’un aspect du culte, à côté des enjeux religieux, politiques et territoriaux, les requêtes de guérison sont parmi les principales requêtes formulées aux esprits. Cet article examine les dimensions thérapeutiques de la pratique du culte qui s’articulent autour de deux pôles : pratiquer la possession pour soigner les autres ou pour se soigner soi-même. C’est, en effet, la santé, avec l’harmonie au sein de la vie familiale, la réussite dans le commerce ou les études, que les disciples viennent chercher auprès des esprits et de leurs intermédiaires. Par ailleurs, comme pour de nombreux cultes de possession, la maladie est très souvent à l’origine du processus qui mène à la pratique médiumnique. Certains médiums, ainsi que quelques esprits, ont à cet effet des pouvoirs spécialisés dans la guérison. Enfin, l’article envisage certaines transformations du rôle social des médiums.Spirits mediums of the Four Palaces have been taking part for a long time, along with other religious specialists, in the Vietnamese therapeutic area. They have helped, and still do despite historical upheavals, taking care of different kind of illnesses through rituals and, more generally, through spirits’ interventions. If healing is only one side of the worship, beside religious, political and territorial issues, it is one of the main issues addressed to the spirits. This paper investigates healing dimensions of the worship which are of two kinds : performing spirit possession in order to cure others or in order to cure

  1. Evolution of the Petasis-Ferrier union/rearrangement tactic: construction of architecturally complex natural products possessing the ubiquitous cis-2,6-substituted tetrahydropyran structural element.

    Science.gov (United States)

    Smith, Amos B; Fox, Richard J; Razler, Thomas M

    2008-05-01

    -substituted tetrahydropyranone product to overcome the inherent chelation bias of an adjacent oxazolidine ring during the Lewis-acid-promoted rearrangement. In addition, we discovered that a more concentrated solution of Cp2TiMe2 (0.7 versus 0.5 M in THF) with the addition of ethyl pivalate dramatically improves the yield in the Petasis-Tebbe olefination. During the (+)-zampanolide and (+)-dactylolide programs, we observed that the addition of trifluoromethanesulfonic acid (TfOH), especially on a preparative scale, was crucial to the efficiency of the initial condensation/union reaction, while our efforts toward (-)-kendomycin led to the improved implementation of a modified Kurihara condensation of the beta-hydroxy acid and aldehyde involving i-PrOTMS and TMSOTf. Finally, the successful deployment of the Petasis-Ferrier tactic in our synthesis of (-)-clavosolide A validated the viability of this tactic with a system possessing the highly acid-labile cyclopropylcarbinyl moiety, while the challenges en route to (-)-okilactomycin demonstrated that a neighboring alkene functionality can participate in an intramolecular Prins cyclization during the TMSOTf-promoted union process, unless suitably protected.

  2. effects of sulphur addition on addition on and mechanical properties

    African Journals Online (AJOL)

    User

    234-8034714355. 8034714355. 1. EFFECTS OF SULPHUR ADDITION ON. ADDITION ON. 2. AND MECHANICAL PROPERTIES O. 3. 4. C. W. Onyia. 5. 1DEPT. OF METALLURGICAL AND MATERIALS. 6. 2, 4DEPT. OF METALLURGICAL ...

  3. 19 CFR 7.3 - Duty-free treatment of goods imported from insular possessions of the United States other than...

    Science.gov (United States)

    2010-04-01

    ... INSULAR POSSESSIONS AND GUANTANAMO BAY NAVAL STATION § 7.3 Duty-free treatment of goods imported from...) The goods became a new and different article of commerce as a result of production or manufacture... possession or the United States results from the original commercial transaction between the importer and the...

  4. Unravelling the spirits' message: a study of help-seeking steps and explanatory models among patients suffering from spirit possession in Uganda

    NARCIS (Netherlands)

    van Duijl, M.; Kleijn, W.; de Jong, J.

    2014-01-01

    As in many cultures, also in Uganda spirit possession is a common idiom of distress associated with traumatic experiences. In the DSM-IV and -5, possession trance disorders can be classified as dissociative disorders. Dissociation in Western countries is associated with complicated, time-consuming

  5. Gabriel's Other Possessions

    Science.gov (United States)

    Royer, Melvin

    2012-01-01

    Gabriel's Horn is a solid of revolution commonly featured in calculus textbooks as a counter-intuitive example of a solid having finite volume but infinite surface area. Other examples of solids with surprising geometrical finitude relationships have also appeared in the literature. This article cites several intriguing examples (some of fractal…

  6. ADDITIVES USED TO OBTAIN FOOD

    Directory of Open Access Journals (Sweden)

    Dorina Ardelean

    2012-01-01

    Full Text Available Use of food additives in food is determined by the growth of contemporary food needs of the world population. Additives used in food, both natural and artificial ones, contribute to: improving the organoleptic characteristics and to preserve the food longer, but we must not forget that all these additives should not be found naturally in food products. Some of these additives are not harmful and human pests in small quantities, but others may have harmful effects on health.

  7. Additional integrals of the motion of classical Hamiltonian wave systems

    International Nuclear Information System (INIS)

    Shul'man, E.I.

    1989-01-01

    It is shown that a classical Hamiltonian wave system that possesses at least one additional integral of the motion with quadratic principal part has an infinite number of such integrals in the cases of both nondegenerate and degenerate dispersion laws. Conditions under which in a space of dimension d ≥ 2 a system with nondegenerate dispersion law is completely integratable and its Hamiltonian can be reduced to normal form are found. In the case of a degenerate dispersion law integrals are not sufficient for complete integrability

  8. Lubricity Additives and Wear with DME in Diesel Injection Pumps

    DEFF Research Database (Denmark)

    Nielsen, Kasper; Sorenson, Spencer C.

    1999-01-01

    In recent years it has been demonstrated that Dimethyl Ether (DME) possess many characteristics that could make it a successful alternative to diesel in the next century. High wear of the fuel injection system has been reported. This is caused by lack of natural protective constituents of Dimethyl...... wear of standard diesel jerk pump plungers elements were made with weight measurements, diameter measurements, 2-D and 3-D surface roughness measurements, and photography by a Michelson interferometer. Several lubricity additives were tested, but none reduced wear levels to those for diesel fuel...

  9. Methyloferula stellata gen. nov., sp. nov., an acidophilic, obligately methanotrophic bacterium that possesses only a soluble methane monooxygenase.

    Science.gov (United States)

    Vorobev, Alexey V; Baani, Mohamed; Doronina, Nina V; Brady, Allyson L; Liesack, Werner; Dunfield, Peter F; Dedysh, Svetlana N

    2011-10-01

    Two strains of aerobic methanotrophic bacteria, AR4(T) and SOP9, were isolated from acidic (pH 3.8-4.0) Sphagnum peat bogs in Russia. Another phenotypically similar isolate, strain LAY, was obtained from an acidic (pH 4.0) forest soil in Germany. Cells of these strains were Gram-negative, non-pigmented, non-motile, thin rods that multiplied by irregular cell division and formed rosettes or amorphous cell conglomerates. Similar to Methylocella species, strains AR4(T), SOP9 and LAY possessed only a soluble form of methane monooxygenase (sMMO) and lacked intracytoplasmic membranes. Growth occurred only on methane and methanol; the latter was the preferred growth substrate. mRNA transcripts of sMMO were detectable in cells when either methane or both methane and methanol were available. Carbon was assimilated via the serine and ribulose-bisphosphate (RuBP) pathways; nitrogen was fixed via an oxygen-sensitive nitrogenase. Strains AR4(T), SOP9 and LAY were moderately acidophilic, mesophilic organisms capable of growth between pH 3.5 and 7.2 (optimum pH 4.8-5.2) and at 4-33 °C (optimum 20-23 °C). The major cellular fatty acid was 18 : 1ω7c and the quinone was Q-10. The DNA G+C content was 55.6-57.5 mol%. The isolates belonged to the family Beijerinckiaceae of the class Alphaproteobacteria and were most closely related to the sMMO-possessing methanotrophs of the genus Methylocella (96.4-97.0 % 16S rRNA gene sequence similarity), particulate MMO (pMMO)-possessing methanotrophs of the genus Methylocapsa (96.1-97.0 %), facultative methylotrophs of the genus Methylovirgula (96.1-96.3 %) and non-methanotrophic organotrophs of the genus Beijerinckia (96.5-97.0 %). Phenotypically, strains AR4(T), SOP9 and LAY were most similar to Methylocella species, but differed from members of this genus by cell morphology, greater tolerance of low pH, detectable activities of RuBP pathway enzymes and inability to grow on multicarbon compounds. Therefore, we propose a novel

  10. A histone-like protein of mycobacteria possesses ferritin superfamily protein-like activity and protects against DNA damage by Fenton reaction.

    Directory of Open Access Journals (Sweden)

    Masaki Takatsuka

    Full Text Available Iron is an essential metal for living organisms but its level must be strictly controlled in cells, because ferrous ion induces toxicity by generating highly active reactive oxygen, hydroxyl radicals, through the Fenton reaction. In addition, ferric ion shows low solubility under physiological conditions. To overcome these obstacles living organisms possess Ferritin superfamily proteins that are distributed in all three domains of life: bacteria, archaea, and eukaryotes. These proteins minimize hydroxyl radical formation by ferroxidase activity that converts Fe(2+ into Fe(3+ and sequesters iron by storing it as a mineral inside a protein cage. In this study, we discovered that mycobacterial DNA-binding protein 1 (MDP1, a histone-like protein, has similar activity to ferritin superfamily proteins. MDP1 prevented the Fenton reaction and protects DNA by the ferroxidase activity. The K(m values of the ferroxidase activity by MDP1 of Mycobacterium bovis bacillus Calmette-Guérin (BCG-3007c, Mycobacterium tuberculosis (Rv2986c, and Mycobacterium leprae (ML1683; ML-LBP were 0.292, 0.252, and 0.129 mM, respectively. Furthermore, one MDP1 molecule directly captured 81.4±19.1 iron atoms, suggesting the role of this protein in iron storage. This study describes for the first time a ferroxidase-iron storage protein outside of the ferritin superfamily proteins and the protective role of this bacterial protein from DNA damage.

  11. Pedagogy of the Possessed: re-thinking the Dancer-Researcher-Performer (BPI method in dance curricula in Brazil

    Directory of Open Access Journals (Sweden)

    Ana Paula Höfling

    2016-05-01

    Full Text Available This paper calls into question the central tenets of the Dancer-Researcher-Performer (BPI method taught at the Universidade Estadual de Campinas (Unicamp in Brazil. The analysis problematizes the underlying assumption that students lack an awareness of their own Brazilianness, which they must find through BPI, and questions a choreographic methodology where students are coached to be possessed by the dance. The paper draws attention to the power imbalances inherent in BPI’s co-habitation experience, where students research marginal others who are understood as the source of authentic Brazilian culture. The paper invites BPI students and teachers to reconsider the ethics of this research methodology, and to consider the possibility of choreographic research that engages both mind and body critically and consciously.

  12. Estimating railway infrastructure project cost from transferring nominal price to real price by considering the working time possessions

    DEFF Research Database (Denmark)

    Li, Rui; Landex, Alex; Salling, Kim Bang

    are varying depending on the working time possessions presented through the closure of the railway line. The effective working hours, type of construction work and construction speed are used as constraints to ensure the track closure plan remains feasible. To demonstrate the approach a Danish railway...... and 2) railway construction work costs are not transparent in the market. This paper suggests separating the costs into 3 sub-categories: materials, labour and machinery. Evidently, the materials are further broke-down into subcomponents which then remains fixed whereas the cost of labour and machinery...... construction project, the new line to the fixed link across Fehmarn Belt, is introduced where it is shown that the non-material cost is about 19% of the total expenditure. By assuming three sets of track blocking scenarios with the same amount of construction works it is proven that given an optimal track...

  13. Reactive, anxious and possessive forms of jealousy and their relation to relationship quality among heterosexuals and homosexuals.

    Science.gov (United States)

    Barelds, Dick P H; Dijkstra, Pieternel

    2006-01-01

    The present study examined the relationship between relational quality and three different types of jealousy-reactive, anxious and possessive jealousy. The sample consisted of 76 gay men, 79 lesbians, 70 heterosexual women and 70 heterosexual men. Findings show that different types of jealousy affect relationship quality differently and do so differently for homosexuals and heterosexuals. Among heterosexuals and especially gay men--but not among lesbians--anxious jealousy was negatively related to relationship quality. In contrast, among heterosexuals--but not among gay men or lesbians--reactive jealousy was positively related to relationship quality. The present study shows that distinguishing between different types of jealousy is necessary to entangle the diverse effects of jealousy on the quality of homosexual and heterosexual relationships.

  14. Assessing the level of elder abuse knowledge preprofessionals possess: implications for the further development of university curriculum.

    Science.gov (United States)

    Policastro, Christina; Payne, Brian K

    2014-01-01

    Elder abuse is a multifaceted problemthat requires interdisciplinary prevention and intervention strategies. An important question that arises is whether professionals are adequately prepared to address elder abuse in this collaborative network. Unfortunately, no studies have been conducted to assess the varying levels of knowledge that preprofessionals enrolled in university courses possess with regard to elder abuse. To fill this void, this study assesses the levels of elder abuse awareness among social work, nursing, health professions, and criminal justice students. Specific attention is given to determining whether there are differences in the amount of exposure to elder abuse literature across the disciplines. The study involves the analysis of survey data collected from 202 students enrolled in health and human sciences classes at a large university. Results show that none of the preprofessional groups, on average, reported knowing enough about elder abuse. Implications for future practice and research are provided.

  15. Can the DSM-5 differentiate between nonpathological possession and dissociative identity disorder? A case study from an Afro-Brazilian religion.

    Science.gov (United States)

    Delmonte, Romara; Lucchetti, Giancarlo; Moreira-Almeida, Alexander; Farias, Miguel

    2016-01-01

    The aim of this article is to examine whether the diagnostic criteria of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5), are able to differentiate between nonpathological religious possession and dissociative identity disorder (DID). We use the case study of an individual who leads an Afro-Brazilian religious group (Umbanda), focusing on her personal development and possession experiences from early childhood to the present, spanning a period of more than 40 years, and examine these data following DSM-5 criteria for DID (300.14). Her experiences of possession can be broken into 2 distinct stages. In the 1st stage (childhood and early adulthood), she displayed intrusive thoughts and a lack of control over possession states, which were associated with a heightened state of anxiety, loneliness, amnesia, and family conflict (meeting all 5 criteria for DID). In the 2nd stage (late 20s up to the present), she regularly experienced possession states but felt in control of their onset and found them religiously meaningful. In this 2nd stage, she only fulfilled 3 criteria for DID. We question the accuracy of diagnosing this individual with DID in her earlier life and suggest that the DSM-5 criteria fail to address the ambiguity of affect surrounding possession experiences (positive at the individual level, negative at the interpersonal level) and lack a clearer acknowledgment of the prevalence of possession and other unusual experiences in general populations.

  16. Synthesis of Ethylene or Propylene/1,3-Butadiene Copolymers Possessing Pendant Vinyl Groups with Virtually No Internal Olefins

    Directory of Open Access Journals (Sweden)

    Kenji Michiue

    2015-11-01

    Full Text Available In general, ethylene/1,3-butadiene copolymerizations provides copolymers possessing both pendant vinyls and vinylenes as olefinic moieties. We, at MCI, studied the substituent effects of C2-symmetric zirconocene complexes, rac-[Me2Si(Indenyl’2]ZrCl2 (Indenyl’ = generic substituted indenyl, after activation on the ratio of the pendant vinyls and vinylenes of the resultant copolymers. Complexes examined in this study were rac-dimethylsilylbis (1-indenylzirconium dichloride (1, rac-dimethylsilyl-bis[1-(2-methyl-4,5-benzoindenyl] zirconium dichloride (2, rac-dimethylsilyl-bis[l-(2-methyl -4-phenylindenyl]zirconium dichloride (3, rac-dimethy1si1y1- bis(2-ethyl-4-phenylindenyl zirconium dichloride (4, rac-dimethylsilyl-bis[l-(2-n-propyl -4-(1-naphthylindenyl]zirconium dichloride (5, rac-dimethylsilyl-[1-(2-ethyl-4-(5-(2,2-dimethyl-2,3-dihydro-1H-cyclopenta [a]naphthalenylindenyl][1-(2-n-propyl-4-(5-(2,2-dimethyl-2,3-dihydro-1H-cyclopenta[a] naphthalenylindenyl]zirconium dichloride (6, rac-dimethylsilyl-bis[1-(2-ethyl-4-(9-phenanthrylindenyl]zirconium dichloride (7, and rac-dimethylsilyl-bis[l-(2-n-propyl-4-(9-phenanthrylindenyl]zirconium dichloride (8. We found that the ratio of the pendant vinyls and vinylenes is strongly affected by the bulkiness of the substituent on the complexes examined. The vinyl content increased linearly in the following order, 8 > 7 > 6 > 5 > 4 > 3 > 2 > 1. Notably, complex 8/DMAO formed ethylene/1,3-butadiene copolymers possessing predominant vinyl groups, which can be crucial precursors for functionalized polyolefins. Likewise, complex 8/DMAO afforded propylene/1,3-butadiene copolymers with predominant vinyl groups.

  17. Ultra-thin films of polysilsesquioxanes possessing 3-methacryloxypropyl groups as gate insulator for organic field-effect transistors

    International Nuclear Information System (INIS)

    Nakahara, Yoshio; Kawa, Haruna; Yoshiki, Jun; Kumei, Maki; Yamamoto, Hiroyuki; Oi, Fumio; Yamakado, Hideo; Fukuda, Hisashi; Kimura, Keiichi

    2012-01-01

    Polysilsesquioxanes (PSQs) possessing 3-methacryloxypropyl groups as an organic moiety of the side chain were synthesized by sol–gel condensation copolymerization of the corresponding trialkoxysilanes. The ultra-thin PSQ film with a radical initiator and a cross-linking agent was prepared by a spin-coating method, and the film was cured integrally at low temperatures of less than 120 °C through two different kinds of polymeric reactions, which were radical polymerization of vinyl groups and sol–gel condensation polymerization of terminated silanol and alkoxy groups. The obtained PSQ film showed the almost perfect solubilization resistance to acetone, which is a good solvent of PSQ before polymerization. It became clear by atomic force microscopy observation that the surface of the PSQ film was very smooth at a nano-meter level. Furthermore, pentacene-based organic field-effect transistor (OFET) with the PSQ film as a gate insulator showed typical p-channel enhancement mode operation characteristics and therefore the ultra-thin PSQ film has the potential to be applicable for solution-processed OFET systems. - Highlights: ► Polysilsesquioxanes (PSQs) possessing 3-methacryloxypropyl groups were synthesized. ► The ultra-thin PSQ film could be cured at low temperatures of less than 120 °C. ► The PSQ film showed the almost perfect solubilization resistance to organic solvent. ► The surface of the PSQ film was very smooth at a nano-meter level. ► Pentacene-based organic field-effect transistor with the PSQ film was fabricated.

  18. Ultra-thin films of polysilsesquioxanes possessing 3-methacryloxypropyl groups as gate insulator for organic field-effect transistors

    Energy Technology Data Exchange (ETDEWEB)

    Nakahara, Yoshio; Kawa, Haruna [Department of Applied Chemistry, Faculty of Systems Engineering, Wakayama University, 930 Sakae-dani, Wakayama 640-8510 (Japan); Yoshiki, Jun [Division of Information and Electronic Engineering, Faculty of Engineering, Muroran Institute of Technology, 27-1 Mizumoto-cho, Muroran 050-8585 (Japan); Kumei, Maki; Yamamoto, Hiroyuki; Oi, Fumio [Konishi Chemical IND. Co., LTD., 3-4-77 Kozaika, Wakayama 641-0007 (Japan); Yamakado, Hideo [Department of Applied Chemistry, Faculty of Systems Engineering, Wakayama University, 930 Sakae-dani, Wakayama 640-8510 (Japan); Fukuda, Hisashi [Division of Engineering for Composite Functions, Faculty of Engineering, Muroran Institute of Technology, 27-1 Mizumoto-cho, Muroran 050-8585 (Japan); Kimura, Keiichi, E-mail: kkimura@center.wakayama-u.ac.jp [Department of Applied Chemistry, Faculty of Systems Engineering, Wakayama University, 930 Sakae-dani, Wakayama 640-8510 (Japan)

    2012-10-01

    Polysilsesquioxanes (PSQs) possessing 3-methacryloxypropyl groups as an organic moiety of the side chain were synthesized by sol-gel condensation copolymerization of the corresponding trialkoxysilanes. The ultra-thin PSQ film with a radical initiator and a cross-linking agent was prepared by a spin-coating method, and the film was cured integrally at low temperatures of less than 120 Degree-Sign C through two different kinds of polymeric reactions, which were radical polymerization of vinyl groups and sol-gel condensation polymerization of terminated silanol and alkoxy groups. The obtained PSQ film showed the almost perfect solubilization resistance to acetone, which is a good solvent of PSQ before polymerization. It became clear by atomic force microscopy observation that the surface of the PSQ film was very smooth at a nano-meter level. Furthermore, pentacene-based organic field-effect transistor (OFET) with the PSQ film as a gate insulator showed typical p-channel enhancement mode operation characteristics and therefore the ultra-thin PSQ film has the potential to be applicable for solution-processed OFET systems. - Highlights: Black-Right-Pointing-Pointer Polysilsesquioxanes (PSQs) possessing 3-methacryloxypropyl groups were synthesized. Black-Right-Pointing-Pointer The ultra-thin PSQ film could be cured at low temperatures of less than 120 Degree-Sign C. Black-Right-Pointing-Pointer The PSQ film showed the almost perfect solubilization resistance to organic solvent. Black-Right-Pointing-Pointer The surface of the PSQ film was very smooth at a nano-meter level. Black-Right-Pointing-Pointer Pentacene-based organic field-effect transistor with the PSQ film was fabricated.

  19. Color Addition and Subtraction Apps

    Science.gov (United States)

    Ruiz, Frances; Ruiz, Michael J.

    2015-01-01

    Color addition and subtraction apps in HTML5 have been developed for students as an online hands-on experience so that they can more easily master principles introduced through traditional classroom demonstrations. The evolution of the additive RGB color model is traced through the early IBM color adapters so that students can proceed step by step…

  20. How Safe Are Color Additives?

    Science.gov (United States)

    ... Linkedin Pin it Email Print Subscribe: FDA Consumer Health Information Color additives give the red tint to your fruit punch ... in Foods, Drugs, Cosmetics, and Medical Devices Color Additives: FDA's Regulatory Process and Historical Perspectives ... Health Cosmetics Dietary Supplements Drugs Food Medical Devices Nutrition ...

  1. Density measures and additive property

    OpenAIRE

    Kunisada, Ryoichi

    2015-01-01

    We deal with finitely additive measures defined on all subsets of natural numbers which extend the asymptotic density (density measures). We consider a class of density measures which are constructed from free ultrafilters on natural numbers and study a certain additivity property of such density measures.

  2. Resveratrol, a red wine antioxidant, possesses an insulin-like effect in streptozotocin-induced diabetic rats.

    Science.gov (United States)

    Su, Hui-Chen; Hung, Li-Man; Chen, Jan-Kan

    2006-06-01

    Aberrant energy metabolism is one characteristic of diabetes mellitus (DM). Two types of DM have been identified, type 1 and type 2. Most of type 2 DM patients eventually become insulin dependent because insulin secretion by the islets of Langerhans becomes exhausted. In the present study, we show that resveratrol (3,5,4'-trihydroxylstilbene) possesses hypoglycemic and hypolipidemic effects in streptozotocin-induced DM (STZ-DM) rats. In resveratrol-treated STZ-DM rats, the plasma glucose concentration on day 14 was reduced by 25.3 +/- 4.2%, and the triglyceride concentration was reduced by 50.2 +/- 3.2% compared with the vehicle-treated rats. In STZ-nicotinamide DM rats, the plasma glucose concentration on day 14 was reduced by 20.3 +/- 4.2%, and the triglyceride concentration was reduced by 33.3 +/- 2.2% compared with the vehicle-treated rats. Resveratrol administration ameliorates common DM symptoms, such as body weight loss, polyphagia, and polydipsia. In STZ-nicotinamide DM rats, resveratrol administration significantly decreased insulin secretion and delayed the onset of insulin resistance. Further studies showed that glucose uptake by hepatocytes, adipocytes, and skeletal muscle and hepatic glycogen synthesis were all stimulated by resveratrol treatment. Because the stimulation of glucose uptake was not attenuated in the presence of an optimal amount of insulin in insulin-responsive cells, the antihyperglycemic effect of resveratrol appeared to act through a mechanism(s) different from that of insulin.

  3. Curcumin and its demethoxy derivatives possess p300 HAT inhibitory activity and suppress hypertrophic responses in cardiomyocytes

    Directory of Open Access Journals (Sweden)

    Yoichi Sunagawa

    2018-04-01

    Full Text Available The natural compound, curcumin (CUR, possesses several pharmacological properties, including p300-specific histone acetyltransferase (HAT inhibitory activity. In our previous study, we demonstrated that CUR could prevent the development of cardiac hypertrophy by inhibiting p300-HAT activity. Other major curcuminoids isolated from Curcuma longa including demethoxycurcumin (DMC and bisdemethoxycurcumin (BDMC are structural analogs of CUR. In present study, we first confirmed the effect of these three curcuminoid analogs on p300-HAT activity and cardiomyocyte hypertrophy.Our results showed that DMC and BDMC inhibited p300-HAT activity and cardiomyocyte hypertrophy to almost the same extent as CUR. As the three compounds have structural differences in methoxy groups at the 3-position of their phenol rings, our results suggest that these methoxy groups are not involved in the inhibitory effects on p300-HAT activity and cardiac hypertrophy. These findings provide useful insights into the structure–activity relationship and biological activity of curcuminoids for p300-HAT activity and cardiomyocyte hypertrophy. Keywords: Curcumin, Demethoxycurcumin, Bisdemethoxycurcumin, p300, Cardiomyocyte hypertrophy

  4. Children enacting idioms of witchcraft and spirit possession as a response to trauma: therapeutically beneficial, and for whom?

    Science.gov (United States)

    Reis, Ria

    2013-10-01

    This article examines children's enactment of spirit possession idioms and witchcraft in Africa including the meanings such idioms provide and the local healing resources they mobilize. Idioms of haunting spirits in Northern Uganda and witch-children elsewhere in Africa can be interpreted as manifestations of social crises and mass traumatic stress. On the other hand, such idioms also allow children to articulate, reflect upon, and communicate the complex feelings resulting from their precarious positions within families and communities under duress. With the help of Dow's transactional model of symbolic healing, this article explores obstacles to the effectivity of the rich variety of symbolic healing available for haunting spirits in Uganda and points to the generational gap between children and their families and communities. Elsewhere, witchcraft idioms may act as a healing resource at the group level, but at the expense of the accused child. The idioms of evil spirits and witchcraft speak of these children's navigation of the moral universe of their postconflict communities. Given that children's appraisal of their experiences through these notions may also exacerbate their anxiety, interdisciplinary research examining the microprocesses that lead to children being haunted or accused, including emotional and physiological levels effects, is urgently needed.

  5. Non-coding genomic regions possessing enhancer and silencer potential are associated with healthy aging and exceptional survival.

    Science.gov (United States)

    Kim, Sangkyu; Welsh, David A; Myers, Leann; Cherry, Katie E; Wyckoff, Jennifer; Jazwinski, S Michal

    2015-02-28

    We have completed a genome-wide linkage scan for healthy aging using data collected from a family study, followed by fine-mapping by association in a separate population, the first such attempt reported. The family cohort consisted of parents of age 90 or above and their children ranging in age from 50 to 80. As a quantitative measure of healthy aging, we used a frailty index, called FI34, based on 34 health and function variables. The linkage scan found a single significant linkage peak on chromosome 12. Using an independent cohort of unrelated nonagenarians, we carried out a fine-scale association mapping of the region suggestive of linkage and identified three sites associated with healthy aging. These healthy-aging sites (HASs) are located in intergenic regions at 12q13-14. HAS-1 has been previously associated with multiple diseases, and an enhancer was recently mapped and experimentally validated within the site. HAS-2 is a previously uncharacterized site possessing genomic features suggestive of enhancer activity. HAS-3 contains features associated with Polycomb repression. The HASs also contain variants associated with exceptional longevity, based on a separate analysis. Our results provide insight into functional genomic networks involving non-coding regulatory elements that are involved in healthy aging and longevity.

  6. [On the notes of the Xinkan Huangdimingtangjiujing (see text for symbol) in the possession of the National Diet Library].

    Science.gov (United States)

    Amano, Yosuke

    2014-12-01

    This paper analyzes the notes of Xinkan huangdimingtangjiujing which are in the possession of the National Diet Library, particularly referring to those notes which include "master said", or "master's theory". Some of those are found in the answers from Manase Dosan (see text for symbol) to Hata Soha (see text for symbol) collected in the Kotei meido kyukyo hushin shosho (see text for symbol) which is the record of the question and answer letters between Manase Dosan and Hata Soha. This research indicates that this volume has a close relation to the acupuncture research of Dosan's or Soha's school. And it indicates that the "master" in the Notes of Xinkan huangdimingtangjiujing refers to Dosan. Acupuncture research has been flourishing since the Edo era and has compiled a lot of volumes on acupuncture. This volume contains some pioneering pieces of this research done in the Azuchi Momoyama era by Dosan and Soha, and is a precious material, showing that some of the state of affairs of the research done in that age still remains today.

  7. A pilot study of faith healers' views on evil eye, jinn possession, and magic in the kingdom of saudi arabia.

    Science.gov (United States)

    Al-Habeeb, Tariq A

    2003-09-01

    Faith healers usually offer unorthodox therapies to their clients who present with an array of physical and psychological symptoms suggestive of the evil eye, jinn possession, and magic. This exploratory pilot study aims to analyse the pattern of narrated symptoms and treatments given by faith healers practising in the Al-Qassim region, Saudi Arabia. Forty five faith healers who consented to this study were given a predesigned, self-administered, semistructured questionnaire to collect the relevant data. Notably, most faith healers have a poor repertoire of psychiatric symptoms, which could not specifically differentiate the three spiritual disorders. They tend to recommend an array of therapies rooted in religious concepts for the treatment of their clients who, they claim, show substantial improvement in their mental suffering. The revealed symptomatology of each disorder alone may not be specific but it certainly helps them not only to identify these disorders but also to prescribe unconventional therapies. Future research should look systematically into the diagnostic and treatment methods for these disorders.

  8. A PILOT STUDY OF FAITH HEALERS’ VIEWS ON EVIL EYE, JINN POSSESSION, AND MAGIC IN THE KINGDOM OF SAUDI ARABIA

    Science.gov (United States)

    Al-Habeeb, Tariq A.

    2003-01-01

    Background: Faith healers usually offer unorthodox therapies to their clients who present with an array of physical and psychological symptoms suggestive of the evil eye, jinn possession, and magic. Objective: This exploratory pilot study aims to analyse the pattern of narrated symptoms and treatments given by faith healers practising in the Al-Qassim region, Saudi Arabia. Method: Forty five faith healers who consented to this study were given a predesigned, self-administered, semistructured questionnaire to collect the relevant data. Results: Notably, most faith healers have a poor repertoire of psychiatric symptoms, which could not specifically differentiate the three spiritual disorders. They tend to recommend an array of therapies rooted in religious concepts for the treatment of their clients who, they claim, show substantial improvement in their mental suffering. Conclusion: The revealed symptomatology of each disorder alone may not be specific but it certainly helps them not only to identify these disorders but also to prescribe unconventional therapies. Future research should look systematically into the diagnostic and treatment methods for these disorders. PMID:23012035

  9. The Acetone Extract of Sclerocarya birrea (Anacardiaceae) Possesses Antiproliferative and Apoptotic Potential against Human Breast Cancer Cell Lines (MCF-7)

    Science.gov (United States)

    Tanih, Nicoline Fri; Ndip, Roland Ndip

    2013-01-01

    Interesting antimicrobial data from the stem bark of Sclerocarya birrea, which support its use in traditional medicine for the treatment of many diseases, have been delineated. The current study was aimed to further study some pharmacological and toxicological properties of the plant to scientifically justify its use. Anticancer activity of water and acetone extracts of S. birrea was evaluated on three different cell lines, HT-29, HeLa, and MCF-7 using the cell titre blue viability assay in 96-well plates. Apoptosis was evaluated using the acridine orange and propidium iodide staining method, while morphological structure of treated cells was examined using SEM. The acetone extract exhibited remarkable antiproliferative activities on MCF-7 cell lines at dose- and time-dependent manners (24 h and 48 h of incubation). The extract also exerted apoptotic programmed cell death in MCF-7 cells with significant effect on the DNA. Morphological examination also displayed apoptotic characteristics in the treated cells, including clumping, condensation, and culminating to budding of the cells to produce membrane-bound fragmentation, as well as formation of apoptotic bodies. The acetone extract of S. birrea possesses antiproliferative and apoptotic potential against MCF-7-treated cells and could be further exploited as a potential lead in anticancer therapy. PMID:23576913

  10. The N-terminal of a heparin-binding sperm membrane mitogen possess lectin-like sequence

    International Nuclear Information System (INIS)

    Mor, Visesato; Chatterjee, Tapati

    2007-01-01

    Glycosaminoglycans like heparin and heparin sulfate in follicular fluid induce changes in the intracellular environment during the spermatozoal functional maturation. We previously reported the isolation, purification and partial characterization of a heparin binding sperm membrane protein (HBSM). In the present study, the amino acids analysis provided evidence of a single sequence, which suggest the homogeneity of the purified HBSM. Fourteen amino acids- 1 A D T I V A V E L D T Y P N 14 -correspond to the amino terminal sequence of Concanavalin A (Con A) and contain 45.2% carbohydrate by weight. HBSM possess mitogenic property on lymphocytes with comparable magnitude to the well-known mitogen; Con A, inducing 83% radiolabel thymidine incorporation in growing lymphocytes. Unlike Con A, there was no agglutination of cell by HBSM upto 5 ng/ml concentration. Interestingly, we found that heparin and chondroitin sulfate-conjugated HBSM inhibit the proliferative activity. Similar effect was also found with an in-house isolate sulfated glycans; G-I (28% sulfate). In contrast, there was no inhibition by the desulfated form; G-ID. Altogether, our data suggest that the mechanism of cell proliferative pathway may be different for HBSM and Con A

  11. African Woman Rises from the Ashes: Alice Walker’s Mimicry of Classic Ethnography in Possessing the Secret of Joy

    Directory of Open Access Journals (Sweden)

    Zohreh Ramin

    2017-07-01

    Full Text Available Before the advent of deconstructive schools of thought in the second half of the twentieth century, anthropology and ethnography were hailed as scientific disciplines whose major consideration was to provide an objective analysis of other cultures. However, the launch of such critical approaches as postcolonialism, feminism, and postmodernism has nullified the two disciplines’ claim to scientificity and objectivity by laying bare their sexist, racist backdrop. In the postist zeitgeist, new ethnographies have been promoted in an attempt to disrupt the hierarchical relationship between the researcher and the studied subject of classic ethnography through including first-hand marginalized voices. Moreover, they blur the long-held generic boundaries between science and fiction via establishing the “ethnographic novel” as a medium that committedly voices the subalterns. Alice Walker’s Possessing the Secret of Joy (1992 is one of these new ethnographic novels which has as its protagonist an oppressed African woman. What makes Walker’s work distinct and notable is that the feminist writer subversively employs the conventional mode of ethnographic writing to stand up to African patriarchy and its horrific ritual of female circumcision.

  12. Prevalence of Food Additive Intolerance

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard

    1994-01-01

    The prevalence estimates vary with a factor 100. As the results vary so do the study populations. 6 If the different study populations are accounted for, a common conclusion can be drawn: Food additive intolerance is found in adults with atopic symptoms from the respiratory tract and skin. The prevalence......1 The existing prevalence estimates of food additive intolerance(1-4) are being reviewed. 2 In the EEC report the estimated frequency of food additive intolerance is 0.03% to 0.15% based on data from patient groups. 3 The British population study results in a prevalence estimate of 0.......026%. The challenged population is 81 children and adults with a history of reproducible clinical symptoms after ingestion of food additives. 4 In the Danish population study a prevalence of 1-2% is found in children age 5-16. In this study a total of 606 children mainly with atopic disease have been challenged. 5...

  13. Topology Optimization for Additive Manufacturing

    DEFF Research Database (Denmark)

    Clausen, Anders

    This PhD thesis deals with the combination of topology optimization and additive man-ufacturing (AM, also known as 3D-printing). In addition to my own works, the thesis contains a broader review and assessment of the literature within the field. The thesis first presents a classification...... of the various AM technologies, a review of relevant manufacturing materials, the properties of these materials in the additively manufactured part, as well as manufacturing constraints with a potential for design optimization. Subsequently, specific topology optimization formulations relevant for the most im...... for scalable manufacturing. In relation to interface problems it is shown how a flexible void area may be included into a standard minimum compliance problem by employing an additional design variable field and a sensitivity filter. Furthermore, it is shown how the design of coated structures may be modeled...

  14. (ICSID) ADDITIONAL FACILITY IN INTERNA

    African Journals Online (AJOL)

    Fr. Ikenga

    ... which is adopted by Article 5 of the Additional Facility Rules to guide the ... B, Barrister at Law, e-mail: kcezeibe@yahoo.com; Phone 08033950631 and .... revision and annulment which are internally available under the Washington ...

  15. Food additives: an ethical evaluation.

    Science.gov (United States)

    Mepham, Ben

    2011-01-01

    Food additives are an integral part of the modern food system, but opinion polls showing most Europeans have worries about them imply an urgent need for ethical analysis of their use. The existing literature on food ethics, safety assessment and animal testing. Food additives provide certain advantages in terms of many people's lifestyles. There are disagreements about the appropriate application of the precautionary principle and of the value and ethical validity of animal tests in assessing human safety. Most consumers have a poor understanding of the relative benefits and risks of additives, but concerns over food safety and animal testing remain high. Examining the impacts of food additives on consumer sovereignty, consumer health and on animals used in safety testing should allow a more informed debate about their appropriate uses.

  16. Wide and High Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-03-01

    The goal of this project is to develop and demonstrate the enabling technologies for Wide and High Additive Manufacturing (WHAM). WHAM will open up new areas of U.S. manufacturing for very large tooling in support of the transportation and energy industries, significantly reducing cost and lead time. As with Big Area Additive Manufacturing (BAAM), the initial focus is on the deposition of composite materials.

  17. Food additives and preschool children.

    Science.gov (United States)

    Martyn, Danika M; McNulty, Breige A; Nugent, Anne P; Gibney, Michael J

    2013-02-01

    Food additives have been used throughout history to perform specific functions in foods. A comprehensive framework of legislation is in place within Europe to control the use of additives in the food supply and ensure they pose no risk to human health. Further to this, exposure assessments are regularly carried out to monitor population intakes and verify that intakes are not above acceptable levels (acceptable daily intakes). Young children may have a higher dietary exposure to chemicals than adults due to a combination of rapid growth rates and distinct food intake patterns. For this reason, exposure assessments are particularly important in this age group. The paper will review the use of additives and exposure assessment methods and examine factors that affect dietary exposure by young children. One of the most widely investigated unfavourable health effects associated with food additive intake in preschool-aged children are suggested adverse behavioural effects. Research that has examined this relationship has reported a variety of responses, with many noting an increase in hyperactivity as reported by parents but not when assessed using objective examiners. This review has examined the experimental approaches used in such studies and suggests that efforts are needed to standardise objective methods of measuring behaviour in preschool children. Further to this, a more holistic approach to examining food additive intakes by preschool children is advisable, where overall exposure is considered rather than focusing solely on behavioural effects and possibly examining intakes of food additives other than food colours.

  18. effects of sulphur addition on addition on and mechanical properties

    African Journals Online (AJOL)

    User

    on the microstructure and mechanical properties of sand cast been investigated ... owed that the addition of sulphur to Al-12wt%Si alloy. 12wt%Si alloy .... 28 materials. 29. Element. Aluminum. Silicon. Al. Si. Ca. Fe. Cu. Zn. Mn. Mg. Cr. B. 99.71.

  19. pirABvp-Bearing Vibrio parahaemolyticus and Vibrio campbellii Pathogens Isolated from the Same AHPND-Affected Pond Possess Highly Similar Pathogenic Plasmids

    Directory of Open Access Journals (Sweden)

    Xuan Dong

    2017-10-01

    Full Text Available Acute hepatopancreatic necrosis disease (AHPND is a severe shrimp disease originally shown to be caused by virulent strains of Vibrio parahaemolyticus (VPAHPND. Rare cases of AHPND caused by Vibrio species other than V. parahaemolyticus were reported. We compared an AHPND-causing V. campbellii (VCAHPND and a VPAHPND isolate from the same AHPND-affected pond. Both strains are positive for the virulence genes pirABvp. Immersion challenge test with Litopenaeus vannamei indicated the two strains possessed similar pathogenicity. Complete genome comparison showed that the pirABvp-bearing plasmids in the two strains were highly homologous, and they both shared high homologies with plasmid pVA1, the reported pirABvp-bearing plasmid. Conjugation and DNA-uptake genes were found on the pVA1-type plasmids and the host chromosomes, respectively, which may facilitate the dissemination of pirABvp. Novel variations likely driven by ISVal1 in the genetic contexts of the pirABvp genes were found in the two strains. Moreover, the VCAHPND isolate additionally contains multiple antibiotic resistance genes, which may bring difficulties to control its future outbreak. The dissemination of the pirABvp in non-parahaemolyticus Vibrio also rises the concern of missing detection in industrial settings since the isolation method currently used mainly targeting V. parahaemolyticus. This study provides timely information for better understanding of the causes of AHPND and molecular epidemiology of pirABvp and also appeals for precautions to encounter the dissemination of the hazardous genes.

  20. Evaluation of certain food additives.

    Science.gov (United States)

    2017-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee’s evaluations of technical, toxicological and dietary exposure data for 10 food additives (Allura Red AC; carob bean gum; lutein esters from Tagetes erecta; octenyl succinic acid (OSA)– modified gum arabic; pectin; Quinoline Yellow; rosemary extract; steviol glycosides; tartrazine; and xanthan gum) and five groups of flavouring agents (alicyclic, alicyclic-fused and aromatic-fused ring lactones; aliphatic and aromatic amines and amides; aliphatic secondary alcohols, ketones and related esters; cinnamyl alcohol and related substances; and tetrahydrofuran and furanone derivatives). Specifications for the following food additives were revised: aspartame; cassia gum; citric and fatty acid esters of glycerol (CITREM); modified starches; octanoic acid; starch sodium octenyl succinate; and total colouring matters. Annexed to the report are tables summarizing the Committee’s recommendations for dietary exposures to and toxicological evaluations of all of the food additives, including flavouring agents, considered at this meeting.

  1. Additive manufacturing of tunable lenses

    Science.gov (United States)

    Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

    2017-02-01

    Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

  2. Calcium addition in straw gasification

    DEFF Research Database (Denmark)

    Risnes, H.; Fjellerup, Jan Søren; Henriksen, Ulrik Birk

    2003-01-01

    The present work focuses on the influence of calcium addition in gasification. The inorganic¿organic element interaction as well as the detailed inorganic¿inorganic elements interaction has been studied. The effect of calcium addition as calcium sugar/molasses solutions to straw significantly...... affected the ash chemistry and the ash sintering tendency but much less the char reactivity. Thermo balance test are made and high-temperature X-ray diffraction measurements are performed, the experimental results indicate that with calcium addition major inorganic¿inorganic reactions take place very late...... in the char conversion process. Comprehensive global equilibrium calculations predicted important characteristics of the inorganic ash residue. Equilibrium calculations predict the formation of liquid salt if sufficient amounts of Ca are added and according to experiments as well as calculations calcium binds...

  3. Additive interaction in survival analysis

    DEFF Research Database (Denmark)

    Rod, Naja Hulvej; Lange, Theis; Andersen, Ingelise

    2012-01-01

    It is a widely held belief in public health and clinical decision-making that interventions or preventive strategies should be aimed at patients or population subgroups where most cases could potentially be prevented. To identify such subgroups, deviation from additivity of absolute effects...... an empirical example of interaction between education and smoking on risk of lung cancer. We argue that deviations from additivity of effects are important for public health interventions and clinical decision-making, and such estimations should be encouraged in prospective studies on health. A detailed...... is the relevant measure of interest. Multiplicative survival models, such as the Cox proportional hazards model, are often used to estimate the association between exposure and risk of disease in prospective studies. In Cox models, deviations from additivity have usually been assessed by surrogate measures...

  4. Additional disulfide bonds in insulin

    DEFF Research Database (Denmark)

    Vinther, Tine N; Pettersson, Ingrid; Huus, Kasper

    2015-01-01

    The structure of insulin, a glucose homeostasis-controlling hormone, is highly conserved in all vertebrates and stabilized by three disulfide bonds. Recently, we designed a novel insulin analogue containing a fourth disulfide bond located between positions A10-B4. The N-terminus of insulin's B......-chain is flexible and can adapt multiple conformations. We examined how well disulfide bond predictions algorithms could identify disulfide bonds in this region of insulin. In order to identify stable insulin analogues with additional disulfide bonds, which could be expressed, the Cβ cut-off distance had...... in comparison to analogues with additional disulfide bonds that were more difficult to predict. In contrast, addition of the fourth disulfide bond rendered all analogues resistant to fibrillation under stress conditions and all stable analogues bound to the insulin receptor with picomolar affinities. Thus...

  5. Aminodisulfides as additives to lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Balin, A.I.; Tarasevich, V.B.; Veretenova, T.N.

    1980-01-01

    A study was carried out and tehcnology developed for producing sulfur-nitrogen containing additives of the type of aminodisulfide by interaction of beta, beta-dichlordialkyl (aryl) disulfides with diethanolamine in a medium of sulfur-diethanolamine. The 2,2'-bis-(diethanol)-dialkyl(aryl) disulfides obtained do not hydrolyze in aqueous soltuions of alkalis, exhibit rather high antiscoring properties and are recommended for tests as active additives of high pressure to SOZH and technological lubricants of the oil and emulsion types.

  6. Possession of ATM Sequence Variants as Predictor for Late Normal Tissue Responses in Breast Cancer Patients Treated With Radiotherapy

    International Nuclear Information System (INIS)

    Ho, Alice Y.; Fan, Grace; Atencio, David P.; Green, Sheryl; Formenti, Silvia C.; Haffty, Bruce G.; Iyengar, Preetha B.A.; Bernstein, Jonine L.; Stock, Richard G.; Cesaretti, Jamie A.; Rosenstein, Barry S.

    2007-01-01

    Purpose: The ATM gene product is a central component of cell cycle regulation and genomic surveillance. We hypothesized that DNA sequence alterations in ATM predict for adverse effects after external beam radiotherapy for early breast cancer. Methods and Materials: A total of 131 patients with a minimum of 2 years follow-up who had undergone breast-conserving surgery and adjuvant radiotherapy were screened for sequence alterations in ATM using DNA from blood lymphocytes. Genetic variants were identified using denaturing high performance liquid chromatography. The Radiation Therapy Oncology Group late morbidity scoring schemes for skin and subcutaneous tissues were applied to quantify the radiation-induced effects. Results: Of the 131 patients, 51 possessed ATM sequence alterations located within exons or in short intron regions flanking each exon that encompass putative splice site regions. Of these 51 patients, 21 (41%) exhibited a minimum of a Grade 2 late radiation response. In contrast, of the 80 patients without an ATM sequence variation, only 18 (23%) had radiation-induced adverse responses, for an odds ratio of 2.4 (95% confidence interval, 1.1-5.2). Fifteen patients were heterozygous for the G→A polymorphism at nucleotide 5557, which causes substitution of asparagine for aspartic acid at position 1853 of the ATM protein. Of these 15 patients, 8 (53%) exhibited a Grade 2-4 late response compared with 31 (27%) of the 116 patients without this alteration, for an odds ratio of 3.1 (95% confidence interval, 1.1-9.4). Conclusion: Sequence variants located in the ATM gene, in particular the 5557 G→A polymorphism, may predict for late adverse radiation responses in breast cancer patients

  7. La dépossession. Réformes, enseignement supérieur et pouvoirs au Maghreb

    Directory of Open Access Journals (Sweden)

    Ahmed Ghouati

    2012-07-01

    Full Text Available Inséré dans la stratégie économique de Lisbonne le processus de Bologne a été d’emblée pris en charge par la Commission européenne et confié ensuite aux États de l’Union européenne (UE via des experts. Il a permis à la Commission de prendre un certain pouvoir sur les États nationaux notamment en matière de réforme éducative. Or ce mode institutionnel de pilotage a également été reproduit lors de l’élargissement du processus de Bologne à trois pays du Maghreb : Algérie, Maroc et Tunisie. Officiellement, le processus est jugé positivement par les responsables européens et maghrébins. Cependant ni les étudiants ni les enseignants ne semblent partager les objectifs institutionnels. Après une description du mode d’appropriation du processus, nous exposons dans cet article une partie des résultats d’une enquête de terrain menée par questionnaires de novembre 2007 à mai 2008 au Maghreb auprès d’enseignants et d’enseignants-chercheurs (N=125. Notre hypothèse est que le processus de Bologne s'inscrit certes dans une logique économique (globale, mais il est décliné aussi par les pouvoirs locaux dans le cadre d'un procès de domination et/ou de dépossession des sociétés locales.

  8. Incidence, Antimicrobial Susceptibility, and Toxin Genes Possession Screening of Staphylococcus aureus in Retail Chicken Livers and Gizzards

    Directory of Open Access Journals (Sweden)

    Lubna S. Abdalrahman

    2015-04-01

    Full Text Available Few recent outbreaks in Europe and the US involving Campylobacter and Salmonella were linked to the consumption of chicken livers. Studies investigating Staphylococcus aureus in chicken livers and gizzards are very limited. The objectives of this study were to determine the prevalence, antimicrobial resistance, and virulence of S. aureus and MRSA (Methicillin-Resistant Staphylococcus aureus in retail chicken livers and gizzards in Tulsa, Oklahoma. In this study, 156 chicken livers and 39 chicken gizzards samples of two brands were collected. While one of the brands showed very low prevalence of 1% (1/100 for S. aureus in chicken livers and gizzards, the second brand showed prevalence of 37% (31/95. No MRSA was detected since none harbored the mecA or mecC gene. Eighty seven S. aureus isolates from livers and 28 from gizzards were screened for antimicrobial resistance to 16 antimicrobials and the possession of 18 toxin genes. Resistance to most of the antimicrobials screened including cefoxitin and oxacillin was higher in the chicken gizzards isolates. While the prevalence of enterotoxin genes seg and sei was higher in the gizzards isolates, the prevalence of hemolysin genes hla, hlb, and hld was higher in the livers ones. The lucocidin genes lukE-lukD was equally prevalent in chicken livers and gizzards isolates. Using spa typing, a subset of the recovered isolates showed that they are not known to be livestock associated and, hence, may be of a human origin. In conclusion, this study stresses the importance of thorough cooking of chicken livers and gizzards since it might contain multidrug resistant enterotoxigenic S. aureus. To our knowledge this is the first study to specifically investigate the prevalence of S. aureus in chicken livers and gizzards in the US.

  9. The Principle of Symmetry from the Respondents' Perspective: Possessions, Apparitions and Mental Illnesses in Research Interviews with Clerics

    Directory of Open Access Journals (Sweden)

    Zdeněk Konopásek

    2010-11-01

    Full Text Available In our current research project, we study how experiences such as hearing the voice of the Lord or having a vision of Virgin Mary are dealt with in psychiatry and Catholic pastoral practice. How is the status of these phenomena negotiated by the participants? Under what conditions do they become instances of legitimate religious experience or, alternatively, symptoms of mental illness? We approach the study of these issues "symmetrically"—we do not prefer a priori medical or spiritual explanations. Some time ago, we demonstrated and explained such an approach (which is common, e.g., in contemporary sociology of science, and its relevance for our research, in an analytic paper on the movie "The Exorcism of Emily Rose" (released in 2005. The paper discusses a highly ambiguous relationship, pictured in the film, between medical and spiritual interpretation of the story of a young girl who was considered possessed by demons and who died after unsuccessful exorcism (KONOPÁSEK & PALEČEK, 2006. The question that has inspired this paper is: can such a symmetrical approach be of any relevance also for people we are studying? In an attempt to get an answer, we have interviewed four Catholic priests on this particular issue. The priests had been asked to watch the movie on Emily Rose and read our paper on it in preparation for the interview. Based on the subsequent discussions (and also on some other empirical data of our current research, we wanted to shed some light on whether and in what ways our specific epistemic perspective coheres with the views and positions of our respondents. It turned out that this reflexive research experiment not only helped to clarify points of mis/understanding between us and our respondents, but also contributed to our own appreciation of the role of symmetry in our current research project as well as in the studied social practice. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1101129

  10. A 'new lease of life': FnCpf1 possesses DNA cleavage activity for genome editing in human cells.

    Science.gov (United States)

    Tu, Mengjun; Lin, Li; Cheng, Yilu; He, Xiubin; Sun, Huihui; Xie, Haihua; Fu, Junhao; Liu, Changbao; Li, Jin; Chen, Ding; Xi, Haitao; Xue, Dongyu; Liu, Qi; Zhao, Junzhao; Gao, Caixia; Song, Zongming; Qu, Jia; Gu, Feng

    2017-11-02

    Cpf1 nucleases were recently reported to be highly specific and programmable nucleases with efficiencies comparable to those of SpCas9. AsCpf1 and LbCpf1 require a single crRNA and recognize a 5'-TTTN-3' protospacer adjacent motif (PAM) at the 5' end of the protospacer for genome editing. For widespread application in precision site-specific human genome editing, the range of sequences that AsCpf1 and LbCpf1 can recognize is limited due to the size of this PAM. To address this limitation, we sought to identify a novel Cpf1 nuclease with simpler PAM requirements. Specifically, here we sought to test and engineer FnCpf1, one reported Cpf1 nuclease (FnCpf1) only requires 5'-TTN-3' as a PAM but does not exhibit detectable levels of nuclease-induced indels at certain locus in human cells. Surprisingly, we found that FnCpf1 possesses DNA cleavage activity in human cells at multiple loci. We also comprehensively and quantitatively examined various FnCpf1 parameters in human cells, including spacer sequence, direct repeat sequence and the PAM sequence. Our study identifies FnCpf1 as a new member of the Cpf1 family for human genome editing with distinctive characteristics, which shows promise as a genome editing tool with the potential for both research and therapeutic applications. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

  11. A critical analysis of debtor’s right to reinstate a credit agreement & resume possession of property

    Directory of Open Access Journals (Sweden)

    Hlako Choma

    2018-03-01

    Full Text Available In terms of section 129(3(a of the South African National Credit Act 34 of 2005 a consumer may reinstate a credit agreement that is in default by paying all the money that is overdue together with default charges incurred by the credit provider and also the costs of enforcing the agreement until the agreement is reinstated. A consumer should pay costs of reinstating agreement if the credit provider has not yet cancelled the agreement. A consumer who paid the required costs will also resume possession of goods that were repossessed by the credit provider pursuant to attachment order. However a consumer is prohibited from reinstating a credit agreement after the property is sold pursuant to attachment order or surrender of property in terms of section 127 (section 129(4. A consumer is also prohibited from reinstating a credit agreement after the execution of court order enforcing that agreement or after termination of agreement in terms of the NCA (section 129(4. Therefore a question arise as to whether a consumer who fell in arrears can reinstate a credit agreement by paying the arrears and preclude a credit provider from proceeding to sell the property. In other words whether a consumer who paid arrears on credit agreement can reinstate such credit agreement and disentitling the credit provider from selling the property. This was the crisp question put to the court in the recent decision in Nkata v Firstrand Bank Limited and Others (CCT73/15 [2016] ZACC 12; 2016 (6 BCLR 794 (CC; 2016 (4 SA 257 (CC (21 April 2016. The purpose this article is to critically analyse the decision in Nkata v Firstrand Bank Limited and Others (CCT73/15 [2016] ZACC 12; 2016 (6 BCLR 794 (CC; 2016 (4 SA 257 (CC (21 April 2016 in view of the application and interpretation of section 129(3 and (4 of the NCA.

  12. PURIFICATION AND FRACTIONAL ANALYSIS OF METHANOLIC EXTRACT OF WEDELIA TRILOBATA POSSESSING APOPTOTIC AND ANTI-LEUKEMIC ACTIVITY

    Science.gov (United States)

    Venkatesh, Uday; Javarasetty, Chethan; Murari, Satish Kumar

    2017-01-01

    Background: Wedelia trilobata (L.) Hitch (WT), commonly known as yellow dots or creeping daisy, is a shrub possessing potent biological activities, and is traditionally used a medicinal plant in Ayurveda, Siddha and Unani systems of medicines, and it has also been tried against leukemia cell line MEG- 01. In the present study, purification and screening of the plant was done for bioactive compounds in methanolic extract of WT for apoptotic and anti-leukemia activity. Materials and methods: The methanolic extract of WT was initially purified through thin layer chromatography (TLC) and screened for the apoptotic and anti-leukemia activities. The positive band of TLC was subjected to silica gel column chromatography for further purification and the fractions obtained from it were screened again for anti-leukemia activity through thymidine uptake assay and apoptotic activity by DNA fragmentation, nuclear staining and flow cytometry assays. The fraction with positive result was subjected to HPLC for analysis of bioactive components. Results: Out of many combinations of solvents, the methanol and dichloromethane combination in the ratio 6:4 has revealed two bands in TLC, among which the second band showed positive results for apoptotic and anti-leukemic activities. Further purification of second band through silica gel chromatography gave five fractions in which the 3rd fraction gave positive results and it shows single peak during compositional analysis through HPLC. Conclusion: The single peak revealed through HPLC indicates the presence of pure compound with apoptotic and anti-leukemia activities encouraging for further structural analysis. PMID:28480428

  13. Additive to clay drilling muds

    Energy Technology Data Exchange (ETDEWEB)

    Voytenko, V.S.; Nekrasova, V.B.; Nikitinskiy, E.L.; Ponomarev, V.N.

    1984-01-01

    The purpose of the invention is to improve the lubricating and strengthening properties of clay drilling muds. This goal is achieved because the lubricating and strengthening additive used is waste from the pulp and paper industry at the stage of reprocessing crude sulfate soap into phytosterol.

  14. The selective addition of water

    NARCIS (Netherlands)

    Resch, V.; Hanefeld, U.

    2014-01-01

    Water is omnipresent and essential. Yet at the same time it is a rather unreactive molecule. The direct addition of water to C[double bond, length as m-dash]C double bonds is therefore a challenge not answered convincingly. In this perspective we critically evaluate the selectivity and the

  15. Additive manufacturing in maxillofacial reconstruction

    Directory of Open Access Journals (Sweden)

    Dincă Luciana Laura

    2017-01-01

    Full Text Available In this paper the benefits of using additive manufacturing technologies in maxillofacial reconstruction are highlighted. Based on a real clinical case, the paper describes the manufacture of an implant prototype replacing the right zygomatic bone and a part of maxilla using additive manufacturing technologies. The face is the most expressive part of the human body that makes us unique. It was shown that the maxillofacial prostheses help to improve the psychological state of patients affected by, because low self esteem feeling appears commonly to this patients with the facial defects. The aim of this paper is to show how using additive manufacturing technologies methods within this research, the producing a surgical model will help surgeon to improve the pre-operative planning. For this we used additive manufacturing technologies such as Stereolitography to achieve the biomodel and FDM-fused deposition modelling to obtain a prototype model because these technologies make it possible to obtain prosthesis according to the physical and mechanical requirements of the region of implantation.

  16. Additively manufactured porous tantalum implants

    NARCIS (Netherlands)

    Wauthle, Ruben; Van Der Stok, Johan; Yavari, Saber Amin; Van Humbeeck, Jan; Kruth, Jean Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-01-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of

  17. Evaluation of certain food additives.

    Science.gov (United States)

    2012-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives, including flavouring agents. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for five food additives (magnesium dihydrogen diphosphate; mineral oil (medium and low viscosity) classes II and III; 3-phytase from Aspergillus niger expressed in Aspergillus niger; serine protease (chymotrypsin) from Nocardiopsis prasina expressed in Bacillus licheniformis; and serine protease (trypsin) from Fusarium oxysporum expressed in Fusarium venenatum) and 16 groups of flavouring agents (aliphatic and aromatic amines and amides; aliphatic and aromatic ethers; aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers containing furan substitution; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; amino acids and related substances; epoxides; furfuryl alcohol and related substances; linear and branched-chain aliphatic, unsaturated, unconjugated alcohols, aldehydes, acids and related esters; miscellaneous nitrogen-containing substances; phenol and phenol derivatives; pyrazine derivatives; pyridine, pyrrole and quinoline derivatives; saturated aliphatic acyclic branched-chain primary alcohols, aldehydes and acids; simple aliphatic and aromatic sulfides and thiols; sulfur-containing heterocyclic compounds; and sulfur-substituted furan derivatives). Specifications for the following food additives were revised: ethyl cellulose, mineral oil (medium viscosity), modified starches and titanium

  18. Racial and Ethnic Differences in Advance Directive Possession: Role of Demographic Factors, Religious Affiliation, and Personal Health Values in a National Survey of Older Adults.

    Science.gov (United States)

    Huang, Ivy A; Neuhaus, John M; Chiong, Winston

    2016-02-01

    Black and Hispanic older Americans are less likely than white older Americans to possess advance directives. Understanding the reasons for this racial and ethnic difference is necessary to identify targets for future interventions to improve advance care planning in these populations. The aim of the study was to evaluate whether racial and ethnic differences in advance directive possession are explained by other demographic factors, religious characteristics, and personal health values. A general population survey was conducted in a nationally representative sample using a web-enabled survey panel of American adults aged 50 and older (n = 2154). In a sample of older Americans, white participants are significantly more likely to possess advance directives (44.0%) than black older Americans (24.0%, p personal health values. These findings support targeted efforts to mitigate racial disparities in access to advance care planning.

  19. Protocol for ADDITION-PRO

    DEFF Research Database (Denmark)

    Johansen, Nanna Borup; Hansen, Anne-Louise Smidt; Jensen, Troels M

    2012-01-01

    disease and microvascular diabetic complications. We also require a better understanding of the mechanisms that underlie and drive early changes in cardiometabolic physiology. The ADDITION-PRO study was designed to address these issues among individuals at different levels of diabetes risk recruited from...... Danish primary care. METHODS/DESIGN: ADDITION-PRO is a population-based, longitudinal cohort study of individuals at high risk for diabetes. 16,136 eligible individuals were identified at high risk following participation in a stepwise screening programme in Danish general practice between 2001 and 2006....... All individuals with impaired glucose regulation at screening, those who developed diabetes following screening, and a random sub-sample of those at lower levels of diabetes risk were invited to attend a follow-up health assessment in 2009-2011 (n=4,188), of whom 2,082 (50%) attended. The health...

  20. Additive theory of prime numbers

    CERN Document Server

    Hua, L K

    2009-01-01

    Loo-Keng Hua was a master mathematician, best known for his work using analytic methods in number theory. In particular, Hua is remembered for his contributions to Waring's Problem and his estimates of trigonometric sums. Additive Theory of Prime Numbers is an exposition of the classic methods as well as Hua's own techniques, many of which have now also become classic. An essential starting point is Vinogradov's mean-value theorem for trigonometric sums, which Hua usefully rephrases and improves. Hua states a generalized version of the Waring-Goldbach problem and gives asymptotic formulas for the number of solutions in Waring's Problem when the monomial x^k is replaced by an arbitrary polynomial of degree k. The book is an excellent entry point for readers interested in additive number theory. It will also be of value to those interested in the development of the now classic methods of the subject.

  1. Dolomitic lime containing hydraulic additive

    International Nuclear Information System (INIS)

    Lagzdina, S.; Sedmalis, U.; Bidermanis, L.; Liepins, J.; Grosvalds, I.

    1997-01-01

    To obtain qualitative dolomitic lime the optimum calcination temperature of dolomite containing about 9 % of clayey substances is 900 deg C. The mechanical strength of dolomitic lime containing 30 % of brick waste additive after 6-9 months of hardening is 1.4-1.5 times higher than that of samples without hydraulic additive, for calcium lime - 2.2-2.6 times higher. Generally the mechanical strength of dolomitic lime is higher than that one of calcium lime. It can be explained by the active role of MgO in the hydration and hardening processes of dolomitic lime. Xray diffraction phase analysis was performed by X-ray diffractometer DPON-3M with Cu-K α emission filter

  2. Decontamination formulation with sorbent additive

    Science.gov (United States)

    Tucker; Mark D. , Comstock; Robert H.

    2007-10-16

    A decontamination formulation and method of making that neutralizes the adverse health effects of both chemical and biological compounds, especially chemical warfare (CW) and biological warfare (BW) agents, and toxic industrial chemicals. The formulation provides solubilizing compounds that serve to effectively render the chemical and biological compounds, particularly CW and BW compounds, susceptible to attack, and at least one reactive compound that serves to attack (and detoxify or kill) the compound. The formulation includes at least one solubilizing agent, a reactive compound, a bleaching activator, a sorbent additive, and water. The highly adsorbent, water-soluble sorbent additive (e.g., sorbitol or mannitol) is used to "dry out" one or more liquid ingredients, such as the liquid bleaching activator (e.g., propylene glycol diacetate or glycerol diacetate) and convert the activator into a dry, free-flowing powder that has an extended shelf life, and is more convenient to handle and mix in the field.

  3. The Frontiers of Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  4. Additional remarks on Dolichoprosopis maculatus, Rits

    NARCIS (Netherlands)

    Neervoort van de Poll, J.R.H.

    1889-01-01

    The description of the above named Longicorn has been drawn up from a unique, rather old ♀ specimen in the collection of the Leyden Museum, originating from Halmaheira. I possessed already for some time a fine ♀ example from the same locality, which agrees exactly with the type specimen, however,

  5. Minimum Additive Waste Stabilization (MAWS)

    International Nuclear Information System (INIS)

    1994-02-01

    In the Minimum Additive Waste Stabilization(MAWS) concept, actual waste streams are utilized as additive resources for vitrification, which may contain the basic components (glass formers and fluxes) for making a suitable glass or glassy slag. If too much glass former is present, then the melt viscosity or temperature will be too high for processing; while if there is too much flux, then the durability may suffer. Therefore, there are optimum combinations of these two important classes of constituents depending on the criteria required. The challenge is to combine these resources in such a way that minimizes the use of non-waste additives yet yields a processable and durable final waste form for disposal. The benefit to this approach is that the volume of the final waste form is minimized (waste loading maximized) since little or no additives are used and vitrification itself results in volume reduction through evaporation of water, combustion of organics, and compaction of the solids into a non-porous glass. This implies a significant reduction in disposal costs due to volume reduction alone, and minimizes future risks/costs due to the long term durability and leach resistance of glass. This is accomplished by using integrated systems that are both cost-effective and produce an environmentally sound waste form for disposal. individual component technologies may include: vitrification; thermal destruction; soil washing; gas scrubbing/filtration; and, ion-exchange wastewater treatment. The particular combination of technologies will depend on the waste streams to be treated. At the heart of MAWS is vitrification technology, which incorporates all primary and secondary waste streams into a final, long-term, stabilized glass wasteform. The integrated technology approach, and view of waste streams as resources, is innovative yet practical to cost effectively treat a broad range of DOE mixed and low-level wastes

  6. Trust Trust Me (The Additivity)

    OpenAIRE

    Mano , Ken; Sakurada , Hideki; Tsukada , Yasuyuki

    2017-01-01

    Part 4: Trust Metrics; International audience; We present a mathematical formulation of a trust metric using a quality and quantity pair. Under a certain assumption, we regard trust as an additive value and define the soundness of a trust computation as not to exceed the total sum. Moreover, we point out the importance of not only soundness of each computed trust but also the stability of the trust computation procedure against changes in trust value assignment. In this setting, we define tru...

  7. A manual on using additives

    International Nuclear Information System (INIS)

    Lee, Bong Hoon

    1991-10-01

    This book consists of five chapters, which describe plasticizer ; summary, synthesis of plasticizer, basic notion, analysis and test on plasticizer, stabilizer ; stabilizer for plastic, an antioxidant, phosphorous acid estelle, ultraviolet ray absorbent, performance of stabilizer, influence on another additives, mix case of PVC production and analysis method for stabilizer, ultraviolet ray absorbent ; basic property and ultraviolet ray absorbent maker, anti-static agent ; basics, anti-static agent of a high molecule and analysis of anti-static agent, flame retardant of plastic.

  8. Dendritic silica nanomaterials (KCC-1) with fibrous pore structure possess high DNA adsorption capacity and effectively deliver genes in vitro.

    Science.gov (United States)

    Huang, Xiaoxi; Tao, Zhimin; Praskavich, John C; Goswami, Anandarup; Al-Sharab, Jafar F; Minko, Tamara; Polshettiwar, Vivek; Asefa, Tewodros

    2014-09-16

    The pore size and pore structure of nanoporous materials can affect the materials' physical properties, as well as potential applications in different areas, including catalysis, drug delivery, and biomolecular therapeutics. KCC-1, one of the newest members of silica nanomaterials, possesses fibrous, large pore, dendritic pore networks with wide pore entrances, large pore size distribution, spacious pore volume and large surface area--structural features that are conducive for adsorption and release of large guest molecules and biomacromolecules (e.g., proteins and DNAs). Here, we report the results of our comparative studies of adsorption of salmon DNA in a series of KCC-1-based nanomaterials that are functionalized with different organoamine groups on different parts of their surfaces (channel walls, external surfaces or both). For comparison the results of our studies of adsorption of salmon DNA in similarly functionalized, MCM-41 mesoporous silica nanomaterials with cylindrical pores, some of the most studied silica nanomaterials for drug/gene delivery, are also included. Our results indicate that, despite their relatively lower specific surface area, the KCC-1-based nanomaterials show high adsorption capacity for DNA than the corresponding MCM-41-based nanomaterials, most likely because of KCC-1's large pores, wide pore mouths, fibrous pore network, and thereby more accessible and amenable structure for DNA molecules to diffuse through. Conversely, the MCM-41-based nanomaterials adsorb much less DNA, presumably because their outer surfaces/cylindrical channel pore entrances can get blocked by the DNA molecules, making the inner parts of the materials inaccessible. Moreover, experiments involving fluorescent dye-tagged DNAs suggest that the amine-grafted KCC-1 materials are better suited for delivering the DNAs adsorbed on their surfaces into cellular environments than their MCM-41 counterparts. Finally, cellular toxicity tests show that the KCC-1-based

  9. Additive property of separative power

    International Nuclear Information System (INIS)

    Yamamoto, Ichiro; Kanagawa, Akira

    1980-01-01

    A separative power of a separating element, whose heads and tails separation factors are α and β, is expressed by phi sub(b)(α, β) = [α(β - 1)1n α - (α - 1)1n β]/(αβ - 1) for the unit flow of the desired material and phi sub(a)(α, β) (= phi sub(b)(β, α)) for that of undesired material. The additive properties of the functions phi sub(b) and phi sub(a) were demonstrated by calculations of various types of ideal cascades, but the origin of the property is not obvious. The present study has furnished the mathematical basis of the additivity based on the special functional equation. First, for symmetric processes (α = β), the functional equation which describes the function representing the quality of separation f(α, α) concerning the desired material was obtained and solved to give the functional form of f(α, α). The result was extented to the function f(α, β) representing the quality of asymmetric separation (α not equal β). The derived function f(α, β) was demonstrated to be equal to phi sub(b)(α, β), and it was verified that functions phi sub(b)(α, β) and phi sub(a)(α, β) have the additive property in themselves. (author)

  10. Evaluation of certain food additives.

    Science.gov (United States)

    2009-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives, including flavouring agents, with a view to recommending acceptable daily intakes (ADIs) and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation and assessment of intake of food additives (in particular, flavouring agents). A summary follows of the Committee's evaluations of technical, toxicological and intake data for certain food additives (asparaginase from Aspergillus niger expressed in A. niger, calcium lignosulfonate (40-65), ethyl lauroyl arginate, paprika extract, phospholipase C expressed in Pichia pastoris, phytosterols, phytostanols and their esters, polydimethylsiloxane, steviol glycosides and sulfites [assessment of dietary exposure]) and 10 groups of related flavouring agents (aliphatic branched-chain saturated and unsaturated alcohols, aldehydes, acids and related esters; aliphatic linear alpha,beta-unsaturated aldehydes, acids and related alcohols, acetals and esters; aliphatic secondary alcohols, ketones and related esters; alkoxy-substituted allylbenzenes present in foods and essential oils and used as flavouring agents; esters of aliphatic acyclic primary alcohols with aliphatic linear saturated carboxylic acids; furan-substituted aliphatic hydrocarbons, alcohols, aldehydes, ketones, carboxylic acids and related esters, sulfides, disulfides and ethers; miscellaneous nitrogen-containing substances; monocyclic and bicyclic secondary alcohols, ketones and related esters; hydroxy- and alkoxy-substituted benzyl derivatives; and substances structurally related to menthol). Specifications for the following food additives were revised: canthaxanthin; carob bean gum and carob bean gum (clarified); chlorophyllin copper complexes, sodium and potassium salts; Fast Green FCF; guar gum and guar gum (clarified

  11. Additive Manufacturing of Porous Metal

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kirka, Michael M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-06-01

    Currently, helium is obtained through separation from natural gas. The current industrial process incurs significant costs and requires large energy resources to successfully achieve separation. Through utilizing Additive Manufacturing (AM) technologies it is possible to reduce both of these burdens when refining helium gas. The ability to engineer porosity levels within Inconel 718 discs for controlled separation of helium from natural gas was investigated. Arrays of samples fabricated using the electron beam melting process were analyzed for their relative porosity density. Based upon the measurements, full scale discs were fabricated, and subsequently tested to determine their effectiveness in separating helium from liquefied natural gas.

  12. Titanium oxide nanoparticles as additives in engine oil

    Directory of Open Access Journals (Sweden)

    Meena Laad

    2018-04-01

    Full Text Available This research study investigates the tribological behaviour of titanium oxide (TiO2 nanoparticles as additives in mineral based multi-grade engine oil. All tests were performed under variable load and varying concentrations of nanoparticles in lubricating oil. The friction and wear experiments were performed using pin-on-disc tribotester. This study shows that mixing of TiO2 nanoparticles in engine oil significantly reduces the friction and wear rate and hence improves the lubricating properties of engine oil. The dispersion analysis of TiO2 nanoparticles in lubricating oil using UV spectrometer confirms that TiO2 nanoparticles possess good stability and solubility in the lubricant and improve the lubricating properties of the engine oil. Keywords: Titanium oxide, Nanoparticles, UV spectrometer, Tribotester, Engine oil

  13. Additive manufacturing of RF absorbers

    Science.gov (United States)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  14. Land tenure regimes in Brazil and the social and environmental purpose of rural land possession: land tenure regularization of riverside communities in the Amazon floodplain

    Directory of Open Access Journals (Sweden)

    Karla Rosane Aguiar Oliveira

    2015-06-01

    on the Concessão de Direito Real de Uso (“Concession of Real Right of Use” as one of the instruments that allows the State to ensure the social function of public properties and guarantee legal certainty for rural land possession by Amazon floodplain populations.

  15. Decree of 4 November 1982 on conditions for notification of possession of special fissile materials and source materials and for keeping accounts thereof

    International Nuclear Information System (INIS)

    1982-01-01

    This Decree lays down a detailed procedure for notification of the possession and accounting of special fissile materials and source materials. The Decree was made in pursuance of Decree No. 185 of 13 February 1964 of the President of the Republic concerning radiation protection and licensing procedures. (NEA) [fr

  16. An integrated palaeoenvironmental investigation of a 6200 year old peat sequence from Ile de la Possession, Iles Crozet, sub-Antarctica

    NARCIS (Netherlands)

    Van der Putten, N.; Hébrard, J. P.; Verbruggen, C.; Van de Vijver, B.; Disnar, J. R.; Spassov, S.; de Beaulieu, J. L.; De Dapper, M.; Keravis, D.; Hus, J.; Thouveny, N.; Frenot, Y.

    2008-01-01

    A 6200 year old peat sequence, cored in a volcanic crater on the sub-Antarctic Ile de la Possession (Iles Crozet), has been investigated, based on a multi-proxy approach. The methods applied are macrobotanical (mosses, seeds and fruits) and diatom analyses, complemented by geochemical (Rock-Eval6)

  17. Source(s) of Syntactic Cross-Linguistic Influence (CLI): The Case of L3 Acquisition of English Possessives by Mazandarani-Persian Bilinguals

    Science.gov (United States)

    Fallah, Nader; Jabbari, Ali Akbar; Fazilatfar, Ali Mohammad

    2016-01-01

    This study investigates the role of previously acquired linguistic systems, Mazandarani and Persian, in the acquisition of third language (L3) English at the initial stages. The data have been obtained from 31 students (age 13-14 years), testing the placement of attributive possessives in a grammaticality judgment task, an element rearrangement…

  18. Additive versus multiplicative muon conservation

    International Nuclear Information System (INIS)

    Nemethy, P.

    1981-01-01

    Experimental elucidation of the question of muon conservation is reviewed. It is shown that neutral-current experiments have not yet yielded information about muonium-antimuonium conversion at the weak-interaction level and that all the charged-current experiments agree that there is no evidence for a multiplicative law. The best limits, from the muon-decay neutrino experiment at LAMPF and from the inverse muon-decay experiment in the CERN neutrino beam, definitely exclude multiplicative law schemes with a branching ratio R approximately 1/2. It is concluded that unless the dynamics conspire to make a multiplicative law with very small R it would appear that muon conservation obeys conserved additive lepton flavor law. (U.K.)

  19. An Additive Manufacturing Test Artifact

    Science.gov (United States)

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  20. Business models for additive manufacturing

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne; Bogers, Marcel

    2015-01-01

    Digital fabrication — including additive manufacturing (AM), rapid prototyping and 3D printing — has the potential to revolutionize the way in which products are produced and delivered to the customer. Therefore, it challenges companies to reinvent their business model — describing the logic...... of creating and capturing value. In this paper, we explore the implications that AM technologies have for manufacturing systems in the new business models that they enable. In particular, we consider how a consumer goods manufacturer can organize the operations of a more open business model when moving from...... a manufacturer-centric to a consumer-centric value logic. A major shift includes a move from centralized to decentralized supply chains, where consumer goods manufacturers can implement a “hybrid” approach with a focus on localization and accessibility or develop a fully personalized model where the consumer...

  1. Additive manufacturing with polypropylene microfibers.

    Science.gov (United States)

    Haigh, Jodie N; Dargaville, Tim R; Dalton, Paul D

    2017-08-01

    The additive manufacturing of small diameter polypropylene microfibers is described, achieved using a technique termed melt electrospinning writing. Sequential fiber layering, which is important for accurate three-dimensional fabrication, was achieved with the smallest fiber diameter of 16.4±0.2μm obtained. The collector speed, temperature and melt flow rate to the nozzle were optimized for quality and minimal fiber pulsing. Of particular importance to the success of this method is appropriate heating of the collector plate, so that the electrostatically drawn filament adheres during the direct-writing process. By demonstrating the direct-writing of polypropylene, new applications exploiting the favorable mechanical, stability and biocompatible properties of this polymer are envisaged. Copyright © 2017. Published by Elsevier B.V.

  2. Additivity of entropic uncertainty relations

    Directory of Open Access Journals (Sweden)

    René Schwonnek

    2018-03-01

    Full Text Available We consider the uncertainty between two pairs of local projective measurements performed on a multipartite system. We show that the optimal bound in any linear uncertainty relation, formulated in terms of the Shannon entropy, is additive. This directly implies, against naive intuition, that the minimal entropic uncertainty can always be realized by fully separable states. Hence, in contradiction to proposals by other authors, no entanglement witness can be constructed solely by comparing the attainable uncertainties of entangled and separable states. However, our result gives rise to a huge simplification for computing global uncertainty bounds as they now can be deduced from local ones. Furthermore, we provide the natural generalization of the Maassen and Uffink inequality for linear uncertainty relations with arbitrary positive coefficients.

  3. Additional Equipment for Soil Biodegradation

    Science.gov (United States)

    Vondráčková, Terezie; Kraus, Michal; Šál, Jiří

    2017-12-01

    Intensification of industrial production, increasing citizens’ living standards, expanding the consumer assortment mean in the production - consumption cycle a constantly increasing occurrence of waste material, which by its very nature must be considered as a source of useful raw materials in all branches of human activity. In addition to strict legislative requirements, a number of circumstances characterize waste management. It is mainly extensive transport associated with the handling and storage of large volumes of substances with a large assortment of materials (substances of all possible physical and chemical properties) and high demands on reliability and time coordination of follow-up processes. Considerable differences in transport distances, a large number of sources, processors and customers, and not least seasonal fluctuations in waste and strong price pressures cannot be overlooked. This highlights the importance of logistics in waste management. Soils that are contaminated with oil and petroleum products are hazardous industrial waste. Methods of industrial waste disposal are landfilling, biological processes, thermal processes and physical and chemical methods. The paper focuses on the possibilities of degradation of oil pollution, in particular biodegradation by bacteria, which is relatively low-cost among technologies. It is necessary to win the fight with time so that no ground water is contaminated. We have developed two additional devices to help reduce oil accident of smaller ranges. In the case of such an oil accident, it is necessary to carry out the permeability test of contaminated soil in time and, on this basis, to choose the technology appropriate to the accident - either in-sit biodegradation - at the site of the accident, or on-sit - to remove the soil and biodegrade it on the designated deposits. A special injection drill was developed for in-sit biodegradation, tossing and aeration equipment of the extracted soil was developed for

  4. Implementasi Perbandingan Metode Simple Additive Weighting Dengan Weighted Sum Model Dalam Pemilihan Siswa Berprestasi

    OpenAIRE

    Siregar, M. Fajrul Falah

    2015-01-01

    Good Performance Student Selection Program of MIN Tanjung Sari aims to increase students interest in learning. The selection is based on determined criterion. To assist the selection process, then a decision support system is needed. The method used is Simple Additive Weighting and Weighted Sum Model. In this research the results of both methods performed will be tested with the three periods of good performance students data possessed by MIN Tanjung Sari Medan Selayang. This s...

  5. Incommensurate crystallography without additional dimensions.

    Science.gov (United States)

    Kocian, Philippe

    2013-07-01

    It is shown that the Euclidean group of translations, when treated as a Lie group, generates translations not only in Euclidean space but on any space, curved or not. Translations are then not necessarily vectors (straight lines); they can be any curve compatible with the parameterization of the considered space. In particular, attention is drawn to the fact that one and only one finite and free module of the Lie algebra of the group of translations can generate both modulated and non-modulated lattices, the modulated character being given only by the parameterization of the space in which the lattice is generated. Moreover, it is shown that the diffraction pattern of a structure is directly linked to the action of that free and finite module. In the Fourier transform of a whole structure, the Fourier transform of the electron density of one unit cell (i.e. the structure factor) appears concretely, whether the structure is modulated or not. Thus, there exists a neat separation: the geometrical aspect on the one hand and the action of the group on the other, without requiring additional dimensions.

  6. Sustainability Characterization for Additive Manufacturing.

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  7. Dynamics of ultrasonic additive manufacturing.

    Science.gov (United States)

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Dimensionless numbers in additive manufacturing

    Science.gov (United States)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  9. Fundamental Aspects of Selective Melting Additive Manufacturing Processes

    Energy Technology Data Exchange (ETDEWEB)

    van Swol, Frank B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Miller, James E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-12-01

    Certain details of the additive manufacturing process known as selective laser melting (SLM) affect the performance of the final metal part. To unleash the full potential of SLM it is crucial that the process engineer in the field receives guidance about how to select values for a multitude of process variables employed in the building process. These include, for example, the type of powder (e.g., size distribution, shape, type of alloy), orientation of the build axis, the beam scan rate, the beam power density, the scan pattern and scan rate. The science-based selection of these settings con- stitutes an intrinsically challenging multi-physics problem involving heating and melting a metal alloy, reactive, dynamic wetting followed by re-solidification. In addition, inherent to the process is its considerable variability that stems from the powder packing. Each time a limited number of powder particles are placed, the stacking is intrinsically different from the previous, possessing a different geometry, and having a different set of contact areas with the surrounding particles. As a result, even if all other process parameters (scan rate, etc) are exactly the same, the shape and contact geometry and area of the final melt pool will be unique to that particular configuration. This report identifies the most important issues facing SLM, discusses the fundamental physics associated with it and points out how modeling can support the additive manufacturing efforts.

  10. Prospective study on human fecal carriage of Enterobacteriaceae possessing mcr-1 and mcr-2 genes in a regional hospital in Hong Kong.

    Science.gov (United States)

    Chan, Wai-Sing; Au, Chun-Hang; Ho, Dona N; Chan, Tsun-Leung; Ma, Edmond Shiu-Kwan; Tang, Bone Siu-Fai

    2018-02-13

    Human fecal carriage of Enterobacteriaceae possessing mobilized colistin resistance genes (mcr-1 and mcr-2) remains obscure in Hong Kong. As part of routine surveillance on emerging antibiotic resistance, we conducted a prospective study on this topic in a regional hospital in Hong Kong. From October 31 to November 25, 2016, all fecal specimens submitted for routine analysis were included in this surveillance study. These comprised 672 consecutive routine fecal specimens collected from 616 individuals. Fecal specimens were screened for colistin-resistant Enterobacteriaceae by culture-based method, and the presence of mcr-1 and mcr-2 genes in resistant isolates was identified by polymerase chain reaction and Sanger sequencing. Whole genome sequencing (WGS) of mcr-1-possessing Escherichia coli strains was facilitated using Illumina® MiSeq® followed by sequence analysis with appropriate bioinformatics tools. Fourteen mcr-1-positive E. coli strains were isolated from 14 separate individuals (2.08% of total fecal specimens), with 9 of them being asymptomatic, healthy clients coming for health assessment. No mcr-2-possessing Enterobacteriaceae was identified. Colistin minimum inhibitory concentrations of these mcr-1-positive isolates ranged from 2 to 4 μg/mL. All these isolates were susceptible to carbapenems with 2 being extended spectrum β-lactamase producers. WGS data revealed that these isolates belonged to at least 12 different sequence types (STs) and possessed diversified plasmid replicons, virulence and acquired antibiotic resistance genes. Further study on an E. coli ST201 strain (Pasteur scheme) revealed coexistence of 47,818-bp IncP-1 and 33,309-bp IncX4 types of mcr-1 plasmids, which was a combination of stability and high transmissibility. To the best of our knowledge, this is the first study on human fecal carriage of Enterobacteriaceae possessing mcr-1 and mcr-2 genes in Hong Kong. Our data further revealed asymptomatic carriage of mcr-1-possessing

  11. Additive Manufacturing of Fuel Injectors

    Energy Technology Data Exchange (ETDEWEB)

    Sadek Tadros, Dr. Alber Alphonse [Edison Welding Institute, Inc., Columbus, OH (United States); Ritter, Dr. George W. [Edison Welding Institute, Inc., Columbus, OH (United States); Drews, Charles Donald [Edison Welding Institute, Inc., Columbus, OH (United States); Ryan, Daniel [Solar Turbines Inc., San Diego, CA (United States)

    2017-10-24

    Additive manufacturing (AM), also known as 3D-printing, has been shifting from a novelty prototyping paradigm to a legitimate manufacturing tool capable of creating components for highly complex engineered products. An emerging AM technology for producing metal parts is the laser powder bed fusion (L-PBF) process; however, industry manufacturing specifications and component design practices for L-PBF have not yet been established. Solar Turbines Incorporated (Solar), an industrial gas turbine manufacturer, has been evaluating AM technology for development and production applications with the desire to enable accelerated product development cycle times, overall turbine efficiency improvements, and supply chain flexibility relative to conventional manufacturing processes (casting, brazing, welding). Accordingly, Solar teamed with EWI on a joint two-and-a-half-year project with the goal of developing a production L-PBF AM process capable of consistently producing high-nickel alloy material suitable for high temperature gas turbine engine fuel injector components. The project plan tasks were designed to understand the interaction of the process variables and their combined impact on the resultant AM material quality. The composition of the high-nickel alloy powders selected for this program met the conventional cast Hastelloy X compositional limits and were commercially available in different particle size distributions (PSD) from two suppliers. Solar produced all the test articles and both EWI and Solar shared responsibility for analyzing them. The effects of powder metal input stock, laser parameters, heat treatments, and post-finishing methods were evaluated. This process knowledge was then used to generate tensile, fatigue, and creep material properties data curves suitable for component design activities. The key process controls for ensuring consistent material properties were documented in AM powder and process specifications. The basic components of the project

  12. Zār Spirit Possession in Iran and African Countries: Group Distress, Culture-Bound Syndrome or Cultural Concept of Distress?

    Directory of Open Access Journals (Sweden)

    Fahimeh Mianji

    2015-12-01

    Full Text Available Zār is the term used to describe a form of spirit possession common in northern African, eastern African, and some Middle-Eastern societies. Although these regions share some cultural similarities arising from their history of slavery, in these places, zār varies in prevalence, clinical characteristics, and social context. Based on a selective review of the literature, this paper looks at the place of zār spirit possession in both DSM-IV and DSM-V; it also examines how zār is manifested in Iran and in African countries including Sudan, Ethiopia, and Egypt; and it aims to provide practical information to mental health clinicians so that they can better understand how this cultural concept is practiced by Iranians and Middle Eastern and African immigrants living near the Persian Gulf coast.

  13. Process of determining the value of belief about jinn possession and whether or not they are a result of mental illness.

    Science.gov (United States)

    Guthrie, Elspeth; Abraham, Seri; Nawaz, Shahzada

    2016-02-02

    We present the case of a 28-year-old Afghan woman who presented perinatally with concerns of being possessed by jinns. She was noted to have third person auditory hallucinations, delusions of control and somatic passivity. She was diagnosed with schizophrenia and was treated with antipsychotic medications with a positive outcome. Her husband also believed that his wife was possessed and believed that her jinns talked through his wife on occasions. He did not experience any psychotic symptoms himself. In the Muslim faith, beliefs about jinns are widely held by people with and without any signs of mental illness. We feel that the patient's interpretation of her symptoms was influenced by her and her husband's religious and cultural beliefs, leading to a delay in receiving appropriate treatment. Awareness among mental health professionals about widely held religious and cultural beliefs will enhance the assessment, diagnosis and treatment of similar presentations. 2016 BMJ Publishing Group Ltd.

  14. Spent yeast as natural source of functional food additives

    Science.gov (United States)

    Rakowska, Rita; Sadowska, Anna; Dybkowska, Ewa; Świderski, Franciszek

    Spent yeasts are by-products arising from beer and wine production which over many years have been chiefly used as feed additives for livestock. They contain many valuable and bioactive substances which has thereby generated much interest in their exploitation. Up till now, the main products obtained from beer-brewing yeasts are β-glucans and yeast extracts. Other like foodstuffs include dried brewer’s yeast, where this is dried and the bitterness removed to be fit for human consumption as well as mannan-oligosaccharides hitherto used in the feed industry. β-glucans constitute the building blocks of yeast cell walls and can thus be used in human nutrition as dietary supplements or serving as food additives in functional foods. β-glucans products obtained via post-fermentation of beer also exhibit a high and multi-faceted biological activity where they improve the blood’s lipid profile, enhance immunological status and have both prebiotic and anti-oxidant properties. Yeast extracts are currently being used more and more to enhance flavour in foodstuffs, particularly for meat and its products. Depending on how autolysis is carried out, it is possible to design extracts of various meat flavours characteristic of specific meats. Many different flavour profiles can be created which may be additionally increased in combination with vegetable extracts. Within the food market, yeast extracts can appear in various guises such as liquids, pastes or powders. They all contain significant amounts of glutamic acid, 5’-GMP and 5’-IMP nucleotides together with various amino acids and peptides that act synergistically for enhancing the flavour of foodstuff products. Recent studies have demonstrated additional benefits of yeast extracts as valuable sources of amino acids and peptides which can be used in functional foods and dietary supplements. These products possess GRAS status (Generally Recognised As Safe) which thereby also adds further as to why they should be used

  15. How do user experiences with different transport modes affect the risk of traffic accidents? From the viewpoint of licence possession status.

    Science.gov (United States)

    Nakai, Hiroshi; Usui, Shinnosuke

    2017-02-01

    Road accidents between different modes of transport-such as between automobiles and pedestrians, automobiles and bicycles, or automobiles and motorcycles-are frequent. In such cases, it is important to consider the other side's perspective. This involves the ability to correctly judge, for every given situation, how other people on the road perceive their surroundings and what they intend to do next. In this paper, we conduct two types of studies assuming that this kind of ability to consider perspectives is higher when the person is licenced to drive the mode of transport used by the other party. For Study 1, we analysed accidents involving senior citizens between the ages of 65 and 74 years, who collided with automobiles as pedestrians or cyclists (1656 and 3192 cases respectively), in terms of the accident category and type of road at the accident spot. The results indicate that possession or non-possession of a licence was irrelevant for accidents involving cyclists, but for accidents with pedestrians, senior citizens who did not possess a licence are likely to be involved in a greater number of accidents in places that require interaction with automobiles, such as while crossing at crosswalks or at intersections. For Study 2, we reviewed 875 ordinary first-class licence practical test examinees, categorised them according to their licence possession status (motorcycle licence, moped licence, or no licence), and made a category-wise comparison of the test instructor's assessment of their ability to make a left turn. The results showed that those who had a motorcycle or moped licence tended to make a left turn more safely. Thus, the results indicate that experience with different modes of transport is likely to reduce the risk of accidents. These findings may be used to popularise educational interventions encouraging users of various transport modes to consider the perspective of others (i.e. via perspective-taking). Copyright © 2016 Elsevier Ltd. All rights

  16. Affinity crosslinking of /sup 125/I-human beta-endorphin to cell lines possessing either mu or delta type opioid binding sites

    Energy Technology Data Exchange (ETDEWEB)

    Keren, O.; Gioannini, T.L.; Hiller, J.M.; Simon, E.J.

    1986-01-01

    Affinity crosslinking of human /sup 125/I-beta-Endorphin to cell lines possessing either mu or delta binding sites was carried out. Autoradiography of SDS-PAGE gels from these crosslinked cell lines revealed that these two sites contain major peptide subunits that differ in molecular size. This confirms our earlier finding in mammalian brain which demonstrated separate and distinct subunits for mu and delta opioid receptors.

  17. The problem of intermixing of metals possessing no mutual solubility upon explosion welding (Cu–Ta, Fe–Ag, Al–Ta)

    International Nuclear Information System (INIS)

    Greenberg, B.A.; Ivanov, M.A.; Rybin, V.V.; Elkina, O.A.; Antonova, O.V.; Patselov, A.M.; Inozemtsev, A.V.; Plotnikov, A.V.; Volkova, A.Yu.; Besshaposhnikov, Yu.P.

    2013-01-01

    On the basis of the results obtained for joints of dissimilar metals such as copper–tantalum and iron–silver, the reason of immiscible suspensions mixing upon explosion welding has been cleared out. It has been found that the interface (plain or wavy) is not smooth and contains inhomogeneities, namely, cusps and local melting zones. The role of granulating fragmentation providing partitioning of initial materials as a main channel of input energy dissipation has been revealed. It has been shown that in joints of metals possessing normal solubility the local melting zones are true solutions, but if metals possess no mutual solubility the local melting zones are colloidal solutions. Realization of either emulsion or suspension variant takes place. The results can be used in the development of new joints of metals possessing no mutual solubility. - Highlights: ► Immiscible pairs Ta/Cu and Fe/Ag are welded successfully by explosive welding. ► Fragmentation provides for partitioning as the main energy dissipation channel. ► Immiscible metals form colloidal solid solutions during solidification. ► Melting and boiling temperatures ratio determines the colloidal solution type. ► Local melting zones being in suspension form enhance welds hardening.

  18. The problem of intermixing of metals possessing no mutual solubility upon explosion welding (Cu-Ta, Fe-Ag, Al-Ta)

    Energy Technology Data Exchange (ETDEWEB)

    Greenberg, B.A., E-mail: bella@imp.uran.ru [Institute of Metal Physics, Ural Branch, Russian Academy of Sciences, S. Kovalevskoi str. 18, Ekaterinburg, 620990 (Russian Federation); Ivanov, M.A. [Kurdyumov Institute of Metal Physics, National Academy of Sciences of Ukraine, Vernadskogo blvd. 36, Kiev, 03680 (Ukraine); Rybin, V.V. [State Polytechnical University, Politekhnicheskaya str. 29, St. Petersburg, 195251 (Russian Federation); Elkina, O.A.; Antonova, O.V.; Patselov, A.M.; Inozemtsev, A.V.; Plotnikov, A.V.; Volkova, A.Yu. [Institute of Metal Physics, Ural Branch, Russian Academy of Sciences, S. Kovalevskoi str. 18, Ekaterinburg, 620990 (Russian Federation); Besshaposhnikov, Yu.P. [OJSC Ural Chemical Machine Building Plant, Khibinogorskii Lane 33, Ekaterinburg, 620010 (Russian Federation)

    2013-01-15

    On the basis of the results obtained for joints of dissimilar metals such as copper-tantalum and iron-silver, the reason of immiscible suspensions mixing upon explosion welding has been cleared out. It has been found that the interface (plain or wavy) is not smooth and contains inhomogeneities, namely, cusps and local melting zones. The role of granulating fragmentation providing partitioning of initial materials as a main channel of input energy dissipation has been revealed. It has been shown that in joints of metals possessing normal solubility the local melting zones are true solutions, but if metals possess no mutual solubility the local melting zones are colloidal solutions. Realization of either emulsion or suspension variant takes place. The results can be used in the development of new joints of metals possessing no mutual solubility. - Highlights: Black-Right-Pointing-Pointer Immiscible pairs Ta/Cu and Fe/Ag are welded successfully by explosive welding. Black-Right-Pointing-Pointer Fragmentation provides for partitioning as the main energy dissipation channel. Black-Right-Pointing-Pointer Immiscible metals form colloidal solid solutions during solidification. Black-Right-Pointing-Pointer Melting and boiling temperatures ratio determines the colloidal solution type. Black-Right-Pointing-Pointer Local melting zones being in suspension form enhance welds hardening.

  19. Streptomyces sp. TEM 33 possesses high lipolytic activity in solid-state fermentation in comparison with submerged fermentation.

    Science.gov (United States)

    Cadirci, Bilge Hilal; Yasa, Ihsan; Kocyigit, Ali

    2016-01-01

    Solid-state fermentation (SSF) is a bioprocess that doesn't need an excess of free water, and it offers potential benefits for microbial cultivation for bioprocesses and product development. In comparing the antibiotic production, few detailed reports could be found with lipolytic enzyme production by Streptomycetes in SSF. Taking this knowledge into consideration, we prefer to purify Actinomycetes species as a new source for lipase production. The lipase-producing strain Streptomyces sp. TEM 33 was isolated from soil and lipase production was managed by solid-state fermentation (SSF) in comparison with submerged fermentation (SmF). Bioprocess-affecting factors like initial moisture content, incubation time, and various carbon and nitrogen additives and the other enzymes secreted into the media were optimized. Lipase activity was measured as 1.74 ± 0.0005 U/g dry substrate (gds) by the p-nitrophenylpalmitate (pNPP) method on day 6 of fermentation with 71.43% final substrate moisture content. In order to understand the metabolic priority in SSF, cellulase and xylanase activity of Streptomyces sp. TEM33 was also measured. The microorganism degrades the wheat bran to its usable form by excreting cellulases and xylanases; then it secretes the lipase that is necessary for degrading the oil in the medium.

  20. Bioactives in cactus (Opuntia ficus-indica) stems possess potent antioxidant and pro-apoptotic activities through COX-2 involvement.

    Science.gov (United States)

    Kim, Jinhee; Soh, Soon Yil; Shin, Juha; Cho, Chi-Woung; Choi, Young Hee; Nam, Sang-Yong

    2015-10-01

    Bioactives extracted from cactus (Opuntia ficus-indica) stems were investigated for their chemopreventive activities using human cancer cells in vitro. The bioactives present in crude extracts were detected and quantified using high-performance liquid chromatography. Among all the extracts, such as hexane, ethyl acetate (EtOAc), acetone, methanol (MeOH), and MeOH:water (80:20), the MeOH extract had the highest amount of polyphenolic compounds and the acetone extract exhibited the most potent effect at scavenging the 2,2,-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-di-(3-ethylbenzothiazoline)-6-sulfonic acid (ABTS(•+) ) radical. In addition, most of the extracts, with the exception of hexane, exhibited significant cytotoxicity in human SW480 colon and MCF7 breast cancer cells. Overall, the SW480 cells were more sensitive than the MCF7 cells to the cytotoxic effect of the O. ficus-indica extracts (OFEs). Cell death by OFE treatment caused significant inhibition of cyclooxygenase-2 and increased the Bax/Bcl2 ratio in both SW480 and MCF7 cell lines. However, degradation of poly (ADP-ribose) polymerase was significantly increased by OFE only in the MCF7 cells, thereby inducing apoptosis. These findings demonstrate the health-benefit roles, including anti-oxidative and anti-proliferative activities as well as pro-apoptotic effects, of bioactive compounds in OFEs, suggesting a chemopreventive role in human cancer cells. © 2014 Society of Chemical Industry.

  1. Actinobacteria possessing antimicrobial and antioxidant activities isolated from the pollen of scots pine (Pinus sylvestris) grown on the Baikal shore.

    Science.gov (United States)

    Axenov-Gribanov, Denis V; Voytsekhovskaya, Irina V; Rebets, Yuriy V; Tokovenko, Bogdan T; Penzina, Tatyana A; Gornostay, Tatyana G; Adelshin, Renat V; Protasov, Eugenii S; Luzhetskyy, Andriy N; Timofeyev, Maxim A

    2016-10-01

    Isolated ecosystems existing under specific environmental conditions have been shown to be promising sources of new strains of actinobacteria. The taiga forest of Baikal Siberia has not been well studied, and its actinobacterial population remains uncharacterized. The proximity between the huge water mass of Lake Baikal and high mountain ranges influences the structure and diversity of the plant world in Siberia. Here, we report the isolation of eighteen actinobacterial strains from male cones of Scots pine trees (Pinus sylvestris) growing on the shore of the ancient Lake Baikal in Siberia. In addition to more common representative strains of Streptomyces, several species belonging to the genera Rhodococcus, Amycolatopsis, and Micromonospora were isolated. All isolated strains exhibited antibacterial and antifungal activities. We identified several strains that inhibited the growth of the pathogen Candida albicans but did not hinder the growth of Saccharomyces cerevisiae. Several isolates were active against Gram-positive and Gram-negative bacteria. The high proportion of biologically active strains producing antibacterial and specific antifungal compounds may reflect their role in protecting pollen against phytopathogens.

  2. Use of Fillers, Pigments and Additives in Fouling-Release Coatings: a Literature Review

    DEFF Research Database (Denmark)

    Tamaev, Nail; Kiil, Søren; Noguer, Albert Camós

    elastomers. As an additional option, pretreatment operations for silica can be considered as they ensure necessary hydrophilic/phobic properties alongside with easy dispersion in the PDMS matrix and lower moisture content. However, in this case, impaired reinforcement is observed [2]. One of the challenges......, pigments also influence mechanical (tensile strength, abrasion resistance, elastic modulus, tear energy) and adhesion properties in condensation-cured PDMS-based coatings [2]. In addition to this, pigments can enhance biofouling resistance. For instance, titanium dioxide possesses a capability of switching...

  3. Impressic acid from Acanthopanax koreanum, possesses matrix metalloproteinase-13 down-regulating capacity and protects cartilage destruction.

    Science.gov (United States)

    Lim, Hyun; Min, Dong Suk; Yun, Han Eul; Kim, Kil Tae; Sun, Ya Nan; Dat, Le Duc; Kim, Young Ho; Kim, Hyun Pyo

    2017-09-14

    Acanthopanax koreanum (Araliaceae) has been used in traditional medicine for enhancing vitality, rheumatism, and bone-related pains. But its activity on cartilage protection has not been known yet. Matrix metalloproteinase (MMP)-13 has an important role in degrading cartilage materials under pathologic conditions such as arthritis. The present study was designed to find the inhibitory activity of impressic acid on MMP-13 expression and cartilage protective action. 70% ethanol extract of Acanthopanax koreanum leaves and impressic acid, a major constituent isolated from the same plant materials, were examined on MMP-13 down-regulating capacity in IL-1β-treated human chondrocyte cell line (SW1353) and rabbit cartilage explants. In IL-1β-treated SW1353 cells, impressic acid significantly and concentration-dependently inhibited MMP-13 expression at 0.5-10μM. Impressic acid was found to be able to inhibit MMP-13 expression by blocking the phosphorylation of signal transducer and activator of transcription-1/-2 (STAT-1/-2) and activation of c-Jun and c-Fos among the cellular signaling pathways involved. Further, impressic acid was found to inhibit the expression of MMP-13 mRNA (47.7% inhibition at 10μM), glycosaminoglycan release (42.2% reduction at 10μM) and proteoglycan loss in IL-1-treated rabbit cartilage explants culture. In addition, a total of 21 lupane-type triterpenoids structurally-related to impressic acid were isolated from the same plant materials and their suppressive activities against MMP-13 expression were also examined. Among these derivatives, compounds 2, 3, 16, and 18 clearly down-regulated MMP-13 expression. However, impressic acid was more potent than these derivatives in down-regulating MMP-13 expression. Impressic acid, its related triterpenoids, and A. koreanum extract have potential as therapeutic agents to prevent cartilage degradation by inhibiting matrix protein degradation. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

  4. Development of a conjugated gadolinium and cisplatin-gelatin possessing properties as an intravascular contrast agent for MR imaging

    International Nuclear Information System (INIS)

    Sonoda, Akinaga; Nitta, Norihisa; Ohta, Shinichi; Seko, Ayumi; Jo, Jun-ichiro; Morikawa, Shigehiro; Tabata, Yasuhiko; Takahashi, Masashi; Murata, Kiyoshi

    2009-01-01

    Purpose: The purpose of this study is to create a Gd-DTPA-Gel-Cis compound, which made from gadolinum (Gd), diethylenetriaminepentaacetic acid (DTPA)-dianhydride, cis-diamminedichloroplatinum (Cis) and bovine gelatin (Gel), that makes it possible to visualize Cis as intravascular agent under magnetic resonance imaging (MRI). Materials and methods: The amount of DTPA, Gd, and Cis were titrated to determine the new compound's conjugation ratio with gelatin. Considering these functions, Gd-DTPA-Gel-Cis was synthesized, and its stability in bovine serum was evaluated. In addition, the signal intensity of the diluted sample was measured under 1.5 Tesla MRI. Results: The synthesized 10 mg/ml of Gd-DTPA-Gel-Cis contained 42.84 μg/ml of Gd and 1.53 μg/ml of platinum. Gd-DTPA-Gel-Cis (100 mg/10 ml) enclosed into the cellulose dialysis tubing was placed in 90 ml of bovine serum and shaken reciprocally at 72 stroke/min at 37 deg. C. Partial release of free Pt was shown at 6 and 24 h, but no release of Gd occurred for a 24-h period. And high stability of Gd conjugated to DTPA-Gel-Cis. This result suggests possible anti-tumor effectiveness and high stability of Gd conjugated to DTPA-Gel-Cis. The diluted sample presented high signal intensity under 1.5 Tesla MRI. Conclusion: Gd-DTPA-Gel-Cis has been developed successfully and we have proven its stability and contrast ability in MRI.

  5. Selected essential oils inhibit key physiological enzymes and possess intracellular and extracellular antimelanogenic properties in vitro

    Directory of Open Access Journals (Sweden)

    Zaahira Aumeeruddy-Elalfi

    2018-01-01

    Full Text Available Essential oils (EOs extracted from six medicinal herbs and food plants [Cinnamomum zeylanicum (CZ, Psiadia arguta (PA, Psiadia terebinthina (PT, Citrus grandis (CGp, Citrus hystrix (CH, and Citrus reticulata (CR] were studied for any inhibitory potential against key physiological enzymes involved in diabetes (α-glucosidase, skin aging (collagenase and elastase, and neurodegenerative disorders (acetylcholinesterase. Kinetic studies of the active EOs on the aforementioned enzymes were determined using Lineweaver–Burk plots. The intracellular and extracellular antimelanogenic potential of the EOs were evaluated on B16F10 mouse melanocytes. CH and CR were found to significantly inhibit (2.476 ± 0.13 μg/mL and 3.636 ± 0.10 μg/mL, respectively acetylcholinesterase, compared with galantamine (3.989 ± 0.16 μg/mL. CH inhibited collagenase (50% inhibitory concentration 28.71 ± 0.16 μg/mL compared with the control (24.45 ± 0.19 μg/mL. The percentage inhibition in the elastase assay of CH was 63.21% compared to the positive control (75.09%. In addition, CH, CR, CGp, CZ, and PT were found to significantly inhibit α-glucosidase (276.70 ± 0.73 μg/mL, 169.90 ± 0.58 μg/mL, 240.60 ± 6.50 μg/mL, 64.52 ± 0.69 μg/mL, and 313.0 ± 5.0 μg/mL, respectively, compared to acarbose (448.80 ± 0.81 μg/mL. Active EOs showed both uncompetitive and competitive types of inhibition. The EOs also inhibited intracellular (50% inhibitory concentration 15.92 ± 1.06 μg/mL, 23.75 ± 4.47 μg/mL, and 28.99 ± 5.70 μg/mL for CH, CR, and CGp, respectively and extracellular (< 15.625 μg/mL for CH, CR, CGp, and PT melanin production when tested against B16F10 mouse melanocytes. Results from the present study tend to show that EOs extracted from these medicinal plants can inhibit key enzymes and may be potential candidates for cosmetic and pharmaceutical industries.

  6. Radioactive Sources in Medicine: Impact of Additional Security Measures

    International Nuclear Information System (INIS)

    Classic, K. L.; Vetter, R. J.; Nelson, K. L.

    2004-01-01

    For many years, medical centers and hospitals have utilized appropriate security measures to prevent theft or unauthorized use of radioactive materials. Recent anxiety about orphan sources and terrorism has heightened concern about diversion of radioactive sources for purposes of constructing a radiological dispersion device. Some medical centers and hospitals may have responded by conducting threat assessments and incorporating additional measures into their security plans, but uniform recommendations or regulations have not been promulgated by regulatory agencies. The International Atomic Energy Agency drafted interim guidance for the purpose of assisting member states in deciding what security measures should be taken for various radioactive sources. The recommendations are aimed at regulators, but suppliers and users also may find the recommendations to be helpful. The purpose of this paper is to describe threat assessments and additional security actions that were taken by one large and one medium-sized medical center and the impact these measures had on operations. Both medical centers possess blood bank irradiators, low-dose-rate therapy sources, and Mo-99/Tc-99m generators that are common to many health care organizations. Other medical devices that were evaluated include high-dose-rate after loaders, intravascular brachytherapy sources, a Co-60 stereotactic surgery unit, and self-shielded irradiators used in biomedical research. This paper will discuss the impact additional security has had on practices that utilize these sources, cost of various security alternatives, and the importance of a security culture in assuring the integrity of security measures without negatively impacting beneficial use of these sources. (Author) 10 refs

  7. A broken self-possession

    DEFF Research Database (Denmark)

    Ingerslev, Line Ryberg

    2017-01-01

    even non-rational acts like habits, obsessive behaviour, and psychopathological symptoms to be personal in a strong sense. The paper dwells on the structure of self-experience in habits to reveal how temporal displacements, disintegration and self-alienation are at the root of human self......A rational agent is someone who knows what she is doing and why; and we hold her responsible for her actions. However, in our everyday lives we often act automatically and even involuntarily, against our own will, as it were. This paper presents a view on human agency that allows us to consider......-experience. As a result, we must reconsider the idea of rational agency such that we can conceive of basic forms of the unconscious, the involuntary and the unreflective as being part of human responsive agency. This allows us to acknowledge that a large part of our actions and decisions are less rational and deliberate...

  8. Lignin conversion to high-octane fuel additives

    Energy Technology Data Exchange (ETDEWEB)

    Shabtai, J.; Zmierczak, W.; Kadangode, S. [University of Utah, Salt Lake City (United States); Chornet, E.; Johnson, D.K. [National Renewable Energy Laboratory, Golden, CO (United States)

    1999-07-01

    Continuing previous studies on the conversion of lignin to reformulated gasoline compositions, new lignin upgrading processes were developed that allow preferential production of specific high-octane fuel additives of two distinct types: (1) C{sub 7}-C{sub 10} alkylbenzenes; and (2) aryl methyl ethers, where aryl mostly = phenyl, 2-methylphenyl, 4-methylphenyl, and dimethylphenyl. Process (1) comprises base-catalyzed depolymerization (BCD) and simultaneous partial ({approx} 50%) deoxygenation of lignin at 270 - 290{sup o}C, in the presence of supercritical methanol as reaction medium, followed by exhaustive hydrodeoxygenation and attendant mild hydrocracking of the BCD product with sulfided catalysts to yield C{sub 8}-C{sub 10} alkylbenzenes as main products. Process (2) involves mild BCD at 250 - 270{sup o}C with preservation of the lignin oxygen, followed by selective C-C hydrocracking with solid superacid catalysts. This method preferentially yields a mixture of alkylated phenols, which upon acid-catalyzed etherification with methanol are converted into corresponding aryl methyl ethers (see above) possessing blending octane numbers in the range of 142-166. In a recent extension of this work, a greatly advantageous procedure for performing the BCD stage of processes (1) and (2) in water as reaction medium was developed. (author)

  9. Septic tank additive impacts on microbial populations.

    Science.gov (United States)

    Pradhan, S; Hoover, M T; Clark, G H; Gumpertz, M; Wollum, A G; Cobb, C; Strock, J

    2008-01-01

    Environmental health specialists, other onsite wastewater professionals, scientists, and homeowners have questioned the effectiveness of septic tank additives. This paper describes an independent, third-party, field scale, research study of the effects of three liquid bacterial septic tank additives and a control (no additive) on septic tank microbial populations. Microbial populations were measured quarterly in a field study for 12 months in 48 full-size, functioning septic tanks. Bacterial populations in the 48 septic tanks were statistically analyzed with a mixed linear model. Additive effects were assessed for three septic tank maintenance levels (low, intermediate, and high). Dunnett's t-test for tank bacteria (alpha = .05) indicated that none of the treatments were significantly different, overall, from the control at the statistical level tested. In addition, the additives had no significant effects on septic tank bacterial populations at any of the septic tank maintenance levels. Additional controlled, field-based research iswarranted, however, to address additional additives and experimental conditions.

  10. Additive conjoint measurement for multiattribute utility

    NARCIS (Netherlands)

    Maas, A.; Wakker, P.P.

    1994-01-01

    This paper shows that multiattribute utility can be simplified by methods from additive conjoint measurement. Given additive conjoint measurability under certainty, axiomatizations can be simplified, and implementation and reliability of elicitation can be improved. This also contributes to the

  11. Additive Manufacturing of Aerospace Propulsion Components

    Science.gov (United States)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  12. The Philosophical Consideration about Food Additives

    OpenAIRE

    Baoyu Ma

    2015-01-01

    This study mainly analyzes the essential features of food additives technology from the angle of philosophy, explaining the essential characteristics of food additives technology. As for the attitude towards the application of food additives, it is influenced by the public's gender, age, educational level, occupation and monthly expenditure for buying non-staple food and other variables, thus, the attitude towards food additives and green food, as well as the attitude towards using artificial...

  13. The dilemma of allergy to food additives.

    Science.gov (United States)

    Bahna, Sami L; Burkhardt, Joshua G

    2018-01-01

    To provide a brief summary on food additives and to outline a practical approach for evaluating subjects suspected of having reactions to food additives. Information was derived from selected reviews and original articles published in peer-reviewed journals, supplemented by the clinical experience of the authors. Priority was given to studies that used blinded, placebo controlled, oral challenges to confirm adverse reactions to food additives. In addition, selected, appropriately evaluated case reports were included. A large number of food additives are widely used in the food industry. Allergic reactions to additives seem to be rare but are very likely underdiagnosed, primarily due to a low index of suspicion. A wide variety of symptoms to food additives have been reported, but a cause-and-effect relationship has not been well documented in the majority of cases. Reactions to food additives should be suspected in patients who report symptoms related to multiple foods or to a certain food when commercially prepared but not when home made. It is also prudent to investigate food additives in subjects considered to have "idiopathic" reactions. Except for a limited number of natural additives, there is a small role for skin tests or in vitro testing. Oral challenge, in stages, with commonly used additives is the definitive procedure for detecting the offending agent. Once the specific additive is identified, management is strict avoidance, which can be difficult.

  14. Enabling Technologies for Medium Additive Manufacturing (MAAM)

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, Bradley S. [ORNL; Love, Lonnie J. [ORNL; Chesser, Phillip C. [ORNL; Miller, Jason [Cosine Additive, Inc.; McCalip, Andrew [Cosine Additive, Inc.

    2018-02-01

    ORNL has worked with Cosine Additive, Inc. on the design of MAAM extrusion components. The objective is to improve the print speed and part quality. A pellet extruder has been procured and integrated into the MAAM printer. Print speed has been greatly enhanced. In addition, ORNL and Cosine Additive have worked on alternative designs for a pellet drying and feed system.

  15. Nonlinear stochastic heat equations with cubic nonlinearities and additive Q-regular noise in R^1

    Directory of Open Access Journals (Sweden)

    Henri Schurz

    2010-09-01

    Full Text Available Semilinear stochastic heat equations perturbed by cubic-type nonlinearities and additive space-time noise with homogeneous boundary conditions are discussed in R^1. The space-time noise is supposed to be Gaussian in time and possesses a Fourier expansion in space along the eigenfunctions of underlying Lapace operators. We follow the concept of approximate strong (classical Fourier solutions. The existence of unique continuous L^2-bounded solutions is proved. Furthermore, we present a procedure for its numerical approximation based on nonstandard methods (linear-implicit and justify their stability and consistency. The behavior of related total energy functional turns out to be crucial in the presented analysis.

  16. Addition of selenium nanoparticles to electrospun silk scaffolds improves mammalian cell activity while reducing bacterial growth

    Directory of Open Access Journals (Sweden)

    Stanley Chung

    2016-07-01

    Full Text Available Silk possesses many beneficial wound healing properties, and electrospun scaffolds are especially applicable for skin applications, due to their smaller interstices and higher surface areas compared to non-electrospun equivalents. However, purified silk promotes microbial growth. In contrast, selenium nanoparticles have excellent antibacterial properties and are a novel antimicrobial chemistry. Here, electrospun silk scaffolds were doped with selenium nanoparticles to impart antibacterial properties to the silk scaffolds. Results showed significantly improved bacterial inhibition and improvement in human dermal fibroblast metabolic activity. These results suggest that the addition of selenium nanoparticles to electrospun silk is a promising approach to improve wound healing with reduced infection, without relying on antibiotics.

  17. Kanono refrakcija Antonios Susanos Byatt romane Apsėdimas | Refraction of the Canon in Antonia Susan Byatt’s Novel Possession

    Directory of Open Access Journals (Sweden)

    Regina Rudaitytė

    2005-01-01

    Full Text Available The article focuses on the revision and transformation of the genre of romance, particularly in its 19th century poetical form, actualized in A. S. Byatt’s novel Possession through an enormous intertextual web of references. The major intertext in the novel is Victorian literature and culture on which Byatt concentrates, covering the whole romance canon through intertextual references to Romantic poetry and to the tradition of medieval romances in their Victorian rewritings.The play with the conventions of the genre of romance and its transformations, the pastiches of the Victorian poetry are the main narrative strategies for Byatt to achieve the refraction of the canon – a re-evaluation of the Victorian poetic tradition from the contemporary feminist and poststructuralist perspective.

  18. Inspection report of unauthorized possession and use of unsealed americium-241 and subsequent confiscation, J.C. Haynes Company, Newark, Ohio

    International Nuclear Information System (INIS)

    1985-11-01

    This US Nuclear Regulatory Commission report documents the circumstances surrounding the March 26, 1985, confiscation and subsequent decontamination activities related to the use of unauthorized quantities of americium-241 at the John C. Haynes Company (licensee) of Newark, Ohio. It focuses on the period from early February to July 26, 1985. The incident started when NRC Region III recieved information that John C. Haynes possessed unauthorized quantities of americium-241 and was conducting unauthorized activities (diamond irradiation). By July 26, 1985, the decontamination activities at the licensee's laboratory were concluded. The licensee's actions with diamond irradiation resulted in contamination in restricted and unrestricted areas of the facility. The confiscation and decontamination activities required the combined efforts of NRC, Federal Bureau of Investigation, US Department of Energy, Oak Ridge Associated Universities, the State of Ohio, and the US Environmental Protection Agency. The report describes the factual information and significant findings associated with the confiscation and decontamination activities

  19. Novel powder/solid composites possessing low Young’s modulus and tunable energy absorption capacity, fabricated by electron beam melting, for biomedical applications

    International Nuclear Information System (INIS)

    Ikeo, Naoko; Ishimoto, Takuya; Nakano, Takayoshi

    2015-01-01

    Highlights: • We fabricated novel porous composites by electron beam melting. • The composites consist of necked powder and melted solid framework. • Unmelted powder that is usually discarded was mechanically functionalized by necking. • The composites possess controllably low Young’s modulus and excellent toughness. • The composites would be promising for utilization in biomedical applications. - Abstract: A novel, hierarchical, porous composite from a single material composed of necked powder and melted solid, with tunable mechanical properties, is fabricated by electron beam melting and subsequent heat treatment. The composite demonstrates low Young’s modulus (⩽31 GPa) and excellent energy absorption capacity, both of which are necessary for use in orthopedic applications. To the best of our knowledge, this is the first report on the synthesis of a material combining controllably low Young’s modulus and excellent toughness

  20. Draft genome sequence of marine alphaproteobacterial strain HIMB11, the first cultivated representative of a unique lineage within the Roseobacter clade possessing an unusually small genome.

    Science.gov (United States)

    Durham, Bryndan P; Grote, Jana; Whittaker, Kerry A; Bender, Sara J; Luo, Haiwei; Grim, Sharon L; Brown, Julia M; Casey, John R; Dron, Antony; Florez-Leiva, Lennin; Krupke, Andreas; Luria, Catherine M; Mine, Aric H; Nigro, Olivia D; Pather, Santhiska; Talarmin, Agathe; Wear, Emma K; Weber, Thomas S; Wilson, Jesse M; Church, Matthew J; DeLong, Edward F; Karl, David M; Steward, Grieg F; Eppley, John M; Kyrpides, Nikos C; Schuster, Stephan; Rappé, Michael S

    2014-06-15

    Strain HIMB11 is a planktonic marine bacterium isolated from coastal seawater in Kaneohe Bay, Oahu, Hawaii belonging to the ubiquitous and versatile Roseobacter clade of the alphaproteobacterial family Rhodobacteraceae. Here we describe the preliminary characteristics of strain HIMB11, including annotation of the draft genome sequence and comparative genomic analysis with other members of the Roseobacter lineage. The 3,098,747 bp draft genome is arranged in 34 contigs and contains 3,183 protein-coding genes and 54 RNA genes. Phylogenomic and 16S rRNA gene analyses indicate that HIMB11 represents a unique sublineage within the Roseobacter clade. Comparison with other publicly available genome sequences from members of the Roseobacter lineage reveals that strain HIMB11 has the genomic potential to utilize a wide variety of energy sources (e.g. organic matter, reduced inorganic sulfur, light, carbon monoxide), while possessing a reduced number of substrate transporters.

  1. Cation Dependence of the Dimerization Enthalpy for A2 [tetracyanoethylene]2 (A=NMe4 , Mepy, NEt4 ) Possessing a Long, Multicenter Bond.

    Science.gov (United States)

    Graham, Adora G; Fedin, Matvey V; Miller, Joel S

    2017-09-12

    [TCNE] .- (TCNE=tetracyanoethylene) has been isolated as D 2h π-[TCNE] 2 2- possessing a long, 2.9 Å multicenter 2-electron-4-center (2e - /4c) C-C bond, and as C 2 π-[TCNE] 2 2- possessing a longer, 3.04 Å multicenter 2e - /6c (4 C+2 N atoms) bond. Temperature-dependent UV/Vis spectroscopic measurements in 2-methyltetrahydrofuran (MeTHF) has led to the determination of the dimerization, 2[TCNE] .- ⇌π-[TCNE] 2 2- , equilibrium constants, K eq (T), [[TCNE] 2 2- ]/[[TCNE] .- ] 2 , enthalpy, ΔH, and entropy, ΔS, of dimerization for [Mepy] 2 [TCNE] 2 (Mepy=N-methylpyridinium, H 3 CNC 5 H 5 + ) possessing D 2h π-[TCNE] 2 2- and [NMe 4 ] 2 [TCNE] 2 possessing C 2 π-[TCNE] 2 2- conformations in the solid state; however, both form D 2h π-[TCNE] 2 2- in MeTHF solution. Based on ΔH=-3.6±0.1 kcal mol -1 (-15.2 kJ mol -1 ), and ΔS=-11±1 eu (-47 J mol -1  K -1 ) and ΔH=-2.4±0.2 kcal mol -1 (-10.2 kJ mol -1 ), and ΔS=-8±1 eu (-32 J mol -1  K -1 ) in MeTHF for [NMe 4 ] 2 [TCNE] 2 and [Mepy] 2 [TCNE] 2 , respectively, the calculated K eq (298 K) are 1.6 and 1.3 m -1 , respectively. The observed K eq (145 K) are 3 and 2 orders of magnitude greater for [NMe 4 ] 2 [TCNE] 2 and [Mepy] 2 [TCNE] 2 , respectively. The K eq (130 K) is 4470, 257, ≈0.8, and ≪0.1 m -1 for [NMe 4 ] 2 [TCNE] 2 , [Mepy] 2 [TCNE] 2 , [NEt 4 ] 2 [TCNE] 2 , and [N(nBu) 4 ] 2 [TCNE] 2 , respectively, decreasing with increasing cation size. At standard conditions and below ambient temperature the equilibrium favors the dimer for the NMe 4 + and Mepy + cations. From the decreasing enthalpy, NMe 4 + >Mepy + , along with the decrease in dimer formation K eq (T) as NMe 4 + >Mepy + >NEt 4 + >N(nBu) 4 + , the dimer bond energy decreases with increasing cation size in MeTHF. This is attributed to a decrease in the [A] + ⋅⋅⋅[TCNE] - attractive interactions with increasing cation size. Solid state UV/Vis spectroscopic determinations of [NMe 4 ] 2

  2. Electrospun meshes possessing region-wise differences in fiber orientation, diameter, chemistry and mechanical properties for engineering bone-ligament-bone tissues.

    Science.gov (United States)

    Samavedi, Satyavrata; Vaidya, Prasad; Gaddam, Prudhvidhar; Whittington, Abby R; Goldstein, Aaron S

    2014-12-01

    Although bone-patellar tendon-bone (B-PT-B) autografts are the gold standard for repair of anterior cruciate ligament ruptures, they suffer from drawbacks such as donor site morbidity and limited supply. Engineered tissues modeled after B-PT-B autografts are promising alternatives because they have the potential to regenerate connective tissue and facilitate osseointegration. Towards the long-term goal of regenerating ligaments and their bony insertions, the objective of this study was to construct 2D meshes and 3D cylindrical composite scaffolds - possessing simultaneous region-wise differences in fiber orientation, diameter, chemistry and mechanical properties - by electrospinning two different polymers from off-set spinnerets. Using a dual drum collector, 2D meshes consisting of an aligned polycaprolactone (PCL) fiber region, randomly oriented poly(lactide-co-glycolide) (PLGA) fiber region and a transition region (comprised of both PCL and PLGA fibers) were prepared, and region-wise differences were confirmed by microscopy and tensile testing. Bone marrow stromal cells (BMSCs) cultured on these meshes exhibited random orientations and low aspect ratios on the random PLGA regions, and high aspect ratios and alignment on the aligned PCL regions. Next, meshes containing an aligned PCL region flanked by two transition regions and two randomly oriented PLGA regions were prepared and processed into 3D cylindrical composite scaffolds using an interpenetrating photo-crosslinkable polyethylene glycol diacrylate hydrogel to recapitulate the shape of B-PT-B autografts. Tensile testing indicated that cylindrical composites were mechanically robust, and eventually failed due to stress concentration in the aligned PCL region. In summary, this study demonstrates a process to fabricate electrospun meshes possessing region-wise differences in properties that can elicit region-dependent cell responses, and be readily processed into scaffolds with the shape of B-PT-B autografts.

  3. [Effects of menthol as an additive in tobacco products and the need for regulation].

    Science.gov (United States)

    Kahnert, S; Nair, U; Mons, U; Pötschke-Langer, M

    2012-03-01

    Menthol is the most widely used and the most prominent tobacco additive in tobacco products advertised and marketed by the tobacco industry. Besides its characteristic flavor, it possesses a variety of pharmacological properties facilitating tobacco smoke inhalation and potentiating dependence. These properties of menthol not only favor tobacco initiation and consumption but can also prevent smoking cessation. This article summarizes the effect of menthol as an additive in tobacco products and its effect on tobacco consumption that causes a number of chronic diseases and premature death and, therefore, counteracts tobacco control measures. Currently, there is no legislative regulation in Germany that considers the health hazard, addiction-enhancing and attractiveness-increasing properties of additives permitted in tobacco products. Effective regulation or even a ban could contribute to a reduction of tobacco consumption and, hence, save many people from a long-lasting tobacco dependence.

  4. Additive operator-difference schemes splitting schemes

    CERN Document Server

    Vabishchevich, Petr N

    2013-01-01

    Applied mathematical modeling isconcerned with solving unsteady problems. This bookshows how toconstruct additive difference schemes to solve approximately unsteady multi-dimensional problems for PDEs. Two classes of schemes are highlighted: methods of splitting with respect to spatial variables (alternating direction methods) and schemes of splitting into physical processes. Also regionally additive schemes (domain decomposition methods)and unconditionally stable additive schemes of multi-component splitting are considered for evolutionary equations of first and second order as well as for sy

  5. Biocompatibility of photopolymers for additive manufacturing

    OpenAIRE

    Leonhardt Stefan; Klare Martin; Scheer Maurice; Fischer Theresa; Cordes Burghard; Eblenkamp Markus

    2016-01-01

    To establish photopolymers for the production of class II or class III medical products by additive manufacturing it is essential to know which components of photopolymeric systems, consisting of monomers, photoinitiators and additives, are the determining factors on their biocompatible properties. In this study the leachable substances of a cured photopolymeric system were eluted and identified by HPLC-MS detection. In addition the cured photopolymer was testes for cytotoxicity and genotoxic...

  6. Harnessing the Potential of Additive Manufacturing

    Science.gov (United States)

    2016-12-01

    31 Defense AT&L: November-December 2016 Harnessing the Potential of Additive Manufacturing Bill Decker Decker is director of Technology...achieve its goal of competition throughout the acquisition life cycle. When we look at additive manufacturing , we have a much different environment. To...Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion. This specification covers additively manufactured titanium-6 aluminum-4 vanadium (Ti-6Al-4V

  7. Additives in food and their properties

    OpenAIRE

    TYLOVÁ, Kristýna

    2013-01-01

    The aim of this work is to deepen the knowledge about additives in foods, the importance of technological additives in foods, their properties and effects on human health. The aim of this work is a study of technical and scientific literature on the topic: "additives in foods and their properties" and review of the literature. Also in the practical part, implementation and evaluation of a questionnaire survey of the experimental group related to the topic: "Validation and comparison of knowle...

  8. Merits and Demerits of Food Additives

    OpenAIRE

    YANG, Xuening; ZHAN, Yong

    2014-01-01

    Food additive is a double-edged sword. It has merits and demerits. Food additives have such merits as improving sensory properties of foods, preventing deterioration and extending the shelf life, increasing varieties of foods, enhancing convenience of foods, facilitating food processing, and satisfying other demands. However, excessive and illegal use of food additives will exert adverse influence on food security. Therefore, it is required to take proper measures to bring merits of food addi...

  9. Merits and Demerits of Food Additives

    Institute of Scientific and Technical Information of China (English)

    Xuening; YANG; Yong; ZHAN

    2014-01-01

    Food additive is a double-edged sword. It has merits and demerits. Food additives have such merits as improving sensory properties of foods,preventing deterioration and extending the shelf life,increasing varieties of foods,enhancing convenience of foods,facilitating food processing,and satisfying other demands. However,excessive and illegal use of food additives will exert adverse influence on food security.Therefore,it is required to take proper measures to bring merits of food additives into full play,and get rid of their demerits.

  10. Allergic and immunologic reactions to food additives.

    Science.gov (United States)

    Gultekin, Fatih; Doguc, Duygu Kumbul

    2013-08-01

    For centuries, food additives have been used for flavouring, colouring and extension of the useful shelf life of food, as well as the promotion of food safety. During the last 20 years, the studies implicating the additives contained in foods and medicine as a causative factor of allergic reactions have been proliferated considerably. In this review, we aimed to overview all of the food additives which were approved to consume in EU and find out how common and serious allergic reactions come into existence following the consuming of food additives.

  11. Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review

    Science.gov (United States)

    Kumbhar, N. N.; Mulay, A. V.

    2016-08-01

    The Additive Manufacturing (AM) processes open the possibility to go directly from Computer-Aided Design (CAD) to a physical prototype. These prototypes are used as test models before it is finalized as well as sometimes as a final product. Additive Manufacturing has many advantages over the traditional process used to develop a product such as allowing early customer involvement in product development, complex shape generation and also save time as well as money. Additive manufacturing also possess some special challenges that are usually worth overcoming such as Poor Surface quality, Physical Properties and use of specific raw material for manufacturing. To improve the surface quality several attempts had been made by controlling various process parameters of Additive manufacturing and also applying different post processing techniques on components manufactured by Additive manufacturing. The main objective of this work is to document an extensive literature review in the general area of post processing techniques which are used in Additive manufacturing.

  12. 78 FR 34351 - Procurement List; Additions

    Science.gov (United States)

    2013-06-07

    .... ADDRESSES: Committee for Purchase from People Who are Blind or Severely Disabled, 1401 S. Clark Street... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions AGENCY: Committee for Purchase from People Who are Blind or Severely Disabled. ACTION: Additions to the...

  13. Additive Manufacturing for Low Volume Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Tate, John G. [Schaeffler Group USA, Spartanburg, SC (United States); Richardson, Bradley S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    ORNL worked with the Schaeffler Group USA to explore additive manufacturing techniques that might be appropriate for prototyping of bearing cages. Multiple additive manufacturing techniques were investigated, including e-beam, binder jet and multiple laser based processes. The binder jet process worked best for the thin, detailed cages printed.

  14. 48 CFR 1603.7002 - Additional guidelines.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Additional guidelines. 1603.7002 Section 1603.7002 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL... OF INTEREST Misleading, Deceptive, or Unfair Advertising 1603.7002 Additional guidelines. Any...

  15. 18 CFR 33.10 - Additional information.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Additional information. 33.10 Section 33.10 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION... § 33.10 Additional information. The Director of the Office of Energy Market Regulation, or his designee...

  16. Additives In Meat and Poultry Products

    Science.gov (United States)

    ... Fact Sheets / Additives in Meat and Poultry Products / Additives in Meat and Poultry Products Z7_0Q0619C0JGR010IFST1G5B10H3 ... Affairs Recalls and Public Health Alerts Regulatory Compliance Regulations, Directives and Notices Rulemaking ...

  17. Feed Additives for Aquaculture and Aquarium Culture

    OpenAIRE

    Barata, Eduardo N.; Velez, Zélia

    2011-01-01

    The presente invention refers of feed additives for aquaculture and aquarium culture. These additives comprise the amino acid, 1-methyl-L-tryptophane, or its isomers with the objective of improving the attractiveness of feeds used in aquaculture and aquaria for fish, as well as other aquatic organisms, under culture conditions. Therefore, this invention has applications in the agriculture-food industry.

  18. 77 FR 41899 - Indirect Food Additives: Polymers

    Science.gov (United States)

    2012-07-17

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 177 [Docket No. FDA-2012-F-0031] Indirect Food Additives: Polymers AGENCY: Food and Drug Administration, HHS. ACTION... CFR part 177 is amended as follows: PART 177--INDIRECT FOOD ADDITIVES: POLYMERS 0 1. The authority...

  19. Photoactive devices including porphyrinoids with coordinating additives

    Science.gov (United States)

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  20. Implementation of the Additional Protocol in Japan

    International Nuclear Information System (INIS)

    Ogawa, T.

    2001-01-01

    The Additional Protocol between Japan and the IAEA entered into force in December 1999. To come into force a series of implementation trials of Additional Protocol was carried out at two Japanese representative nuclear research centers, i.e. Tokai Research Establishment of Japan Atomic Energy Research Institute (JAERI) and Oarai Engineering Center of Japan Nuclear Fuel Cycle Development Institute (JNC). These trials were proposed by Japan and were conducted in cooperation with the IAEA Secretariat. In addition, Japan amended 'the Law for the Regulation of Reactors etc.', to collect adequate information to submit to the IAEA, to arrange the surrounding for the complementary access, etc. In addition, Japan Submitted the Initial Declaration of the Additional Protocol within 180 days of the entry into force of the Protocol, in the middle of June, 2000

  1. Nanofunctionalized zirconia and barium sulfate particles as bone cement additives

    Directory of Open Access Journals (Sweden)

    Riaz Gillani

    2009-12-01

    Full Text Available Riaz Gillani1, Batur Ercan1, Alex Qiao3, Thomas J Webster1,21Division of Engineering, 2Department of Orthopaedics, Brown University, Providence, RI, USA; 3G3 Technology Innovations, LLC, Pittsford, NY, USAAbstract: Zirconia (ZrO2 and barium sulfate (BaSO4 particles were introduced into a methyl methacrylate monomer (MMA solution with polymethyl methacrylate (PMMA beads during polymerization to develop the following novel bone cements: bone cements with unfunctionalized ZrO2 micron particles, bone cements with unfunctionalized ZrO2 nanoparticles, bone cements with ZrO2 nanoparticles functionalized with 3-(trimethoxysilylpropyl methacrylate (TMS, bone cements with unfunctionalized BaSO4 micron particles, bone cements with unfunctionalized BaSO4 nanoparticles, and bone cements with BaSO4 nanoparticles functionalized with TMS. Results demonstrated that in vitro osteoblast (bone-forming cell densities were greater on bone cements containing BaSO4 ceramic particles after four hours compared to control unmodified bone cements. Osteoblast densities were also greater on bone cements containing all of the ceramic particles after 24 hours compared to unmodified bone cements, particularly those bone cements containing nanofunctionalized ceramic particles. Bone cements containing ceramic particles demonstrated significantly altered mechanical properties; specifically, under tensile loading, plain bone cements and bone cements containing unfunctionalized ceramic particles exhibited brittle failure modes whereas bone cements containing nanofunctionalized ceramic particles exhibited plastic failure modes. Finally, all bone cements containing ceramic particles possessed greater radio-opacity than unmodified bone cements. In summary, the results of this study demonstrated a positive impact on the properties of traditional bone cements for orthopedic applications with the addition of unfunctionalized and TMS functionalized ceramic nanoparticles

  2. Advanced Methods for Direct Ink Write Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Compel, W. S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lewicki, J. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2018-01-24

    Lawrence Livermore National Laboratory is one of the world’s premier labs for research and development of additive manufacturing processes. Out of these many processes, direct ink write (DIW) is arguably one of the most relevant for the manufacture of architected polymeric materials, components and hardware. However, a bottleneck in this pipeline that has largely been ignored to date is the lack of advanced software implementation with respect to toolpath execution. There remains to be a convenient, automated method to design and produce complex parts that is user-friendly and enabling for the realization of next generation designs and structures. For a material to be suitable as a DIW ink it must possess the appropriate rheological properties for this process. Most importantly, the material must exhibit shear-thinning in order to extrude through a print head and have a rapid recovery of its static shear modulus. This makes it possible for the extrudate to be self-supporting upon exiting the print head. While this and other prerequisites narrow the scope of ‘offthe- shelf’ printable materials directly amenable to DIW, the process still tolerates a wide range of potential feedstock materials. These include metallic alloys, inorganic solvent borne dispersions, polymeric melts, filler stabilized monomer compositions, pre-elastomeric feedstocks and thermoset resins each of which requires custom print conditions tailored to the individual ink. As such, an ink perfectly suited for DIW may be prematurely determined to be undesirable for the process if printed under the wrong conditions. Defining appropriate print conditions such as extrusion rate, layer height, and maximum bridge length is a vital first step in validating an ink’s DIW capability.

  3. ORNL-GM: Development of Ionic Liquid-Additized, GF-5/6 Compatible Low-Viscosity Oils for Automotive Engine and Rear Axle Lubrication for 4% Improved Fuel Economy

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Jun [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Zhou, Yan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Luo, Huimin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Toops, Todd J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Brookshear, Daniel W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stump, Benjamin C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Viola, Michael B. [General Motors (GM) Technical Center, Pontiac, MI (United States); Zreik, Khaled [General Motors (GM) Technical Center, Pontiac, MI (United States); Ahmed, Tasfia [General Motors (GM) Technical Center, Pontiac, MI (United States)

    2017-01-01

    The overall objective of this project are as follows: Further develop ionic liquid (IL)-additized lowviscosity engine oils meeting the GF-5/6 specifications and possessing superior lubricating characteristics; Expand the IL additive technology to rear axle lubricants; and Seek a combined improvement in the vehicle fuel economy

  4. [Effect of biochar addition on soil evaporation.

    Science.gov (United States)

    Xu, Jian; Niu, Wen Quan; Zhang, Ming Zhi; Li, Yuan; Lyu, Wang; Li, Kang-Yong; Zou, Xiao-Yang; Liang, Bo-Hui

    2016-11-18

    In order to determine the rational amount of biochar application and its effect on soil hydrological processes in arid area, soil column experiments were conducted in the laboratory using three biochar additions (5%, 10% and 15%) and four different biochar types (devaporation. The results showed that the addition of biochar could change the phreatic water recharge, soil water-holding capacity, capillary water upward movement and soil evaporation obviously. But the effects were different depending on the type of biochar raw material and the size of particle. The phreatic water recharge increased with the increasing amount of biochar addition. The addition of biochar could obviously enlarge the soil water-holding capacity and promote the capillary water upward movement rate. This effect was greater when using the material of bamboo charcoal compared with using wood charcoal, while biochar with small particle size had greater impact than that with big particle size. The biochar could effectively restrain the soil evaporation at a low addition amount (5%). But it definitely promoted the soil evaporation if the addition amount was very high. In arid area, biochar addition in appropriate amount could improve soil water retention capacity.

  5. Graphite and Hybrid Nanomaterials as Lubricant Additives

    Directory of Open Access Journals (Sweden)

    Zhenyu J. Zhang

    2014-04-01

    Full Text Available Lubricant additives, based on inorganic nanoparticles coated with organic outer layer, can reduce wear and increase load-carrying capacity of base oil remarkably, indicating the great potential of hybrid nanoparticles as anti-wear and extreme-pressure additives with excellent levels of performance. The organic part in the hybrid materials improves their flexibility and stability, while the inorganic part is responsible for hardness. The relationship between the design parameters of the organic coatings, such as molecular architecture and the lubrication performance, however, remains to be fully elucidated. A survey of current understanding of hybrid nanoparticles as lubricant additives is presented in this review.

  6. Additional symmetries of supersymmetric KP hierarchies

    International Nuclear Information System (INIS)

    Stanciu, S.

    1993-09-01

    We investigate the additional symmetries of several supersymmetric KP hierarchies: The SKP hierarchy of Manin and Radul, the SKP 2 hierarchy, and the Jacobian SKP hierarchy. The main technical tool is the supersymmetric generalisation of a map originally due to Radul between the Lie algebra of superdifferential operators and the Lie algebra of vector fields on the space of supersymmetric Lax operators. In the case of the Manin-Radul SKP hierarchy we identify additional symmetries which form an algebra isomorphic to a subalgebra of superdifferential operators; whereas in the case of the Jacobian SKP, the (additional) symmetries are identified with the algebra itself. (orig.)

  7. Effects of the nonsugar fraction of brown sugar on chronic ultraviolet B irradiation-induced photoaging in melanin-possessing hairless mice.

    Science.gov (United States)

    Sumiyoshi, Maho; Hayashi, Teruaki; Kimura, Yoshiyuki

    2009-04-01

    Brown sugar has been used traditionally for the treatment of skin trouble as a component of soaps or lotions. Symptoms of aging including wrinkles and pigmentation develop earlier in sun-exposed skin than unexposed skin, a phenomenon referred to as photoaging. Ultraviolet B (UVB) radiation is one of the most important environmental factors influencing photoaging. The aim of this study was to clarify whether the nonsugar fraction of brown sugar prevents chronic UVB-induced aging of the skin using melanin-possessing hairless mice. The nonsugar fraction (1% or 3% solution, 50 mul/mouse) was applied topically to the dorsal region every day for 19 weeks. Both solutions prevented an increase in skin thickness and reduction in skin elasticity caused by the UVB. The 3% solution also prevented wrinkles and melanin pigmentation as well as increases in the diameter and length of skin blood vessels. Increases in the expression of matrix metalloproteinase-2 (MMP-2) and vascular endothelial growth factor (VEGF) in UVB-irradiated skin was inhibited by the nonsugar fraction. Prevention of UVB-induced aging of the skin by topical application of the nonsugar fraction of brown sugar may be due to inhibition of increases in MMP-2 and VEGF expression.

  8. 2-O-α-D-glucosylglycerol phosphorylase from Bacillus selenitireducens MLS10 possessing hydrolytic activity on β-D-glucose 1-phosphate.

    Directory of Open Access Journals (Sweden)

    Takanori Nihira

    Full Text Available The glycoside hydrolase family (GH 65 is a family of inverting phosphorylases that act on α-glucosides. A GH65 protein (Bsel_2816 from Bacillus selenitireducens MLS10 exhibited inorganic phosphate (Pi-dependent hydrolysis of kojibiose at the rate of 0.43 s(-1. No carbohydrate acted as acceptor for the reverse phosphorolysis using β-D-glucose 1-phosphate (βGlc1P as donor. During the search for a suitable acceptor, we found that Bsel_2816 possessed hydrolytic activity on βGlc1P with a k cat of 2.8 s(-1; moreover, such significant hydrolytic activity on sugar 1-phosphate had not been reported for any inverting phosphorylase. The H2 (18O incorporation experiment and the anomeric analysis during the hydrolysis of βGlc1P revealed that the hydrolysis was due to the glucosyl-transferring reaction to a water molecule and not a phosphatase-type reaction. Glycerol was found to be the best acceptor to generate 2-O-α-D-glucosylglycerol (GG at the rate of 180 s(-1. Bsel_2816 phosphorolyzed GG through sequential Bi-Bi mechanism with a k cat of 95 s(-1. We propose 2-O-α-D-glucopyranosylglycerol: phosphate β-D-glucosyltransferase as the systematic name and 2-O-α-D-glucosylglycerol phosphorylase as the short name for Bsel_2816. This is the first report describing a phosphorylase that utilizes polyols, and not carbohydrates, as suitable acceptor substrates.

  9. Effects of a turmeric extract (Curcuma longa) on chronic ultraviolet B irradiation-induced skin damage in melanin-possessing hairless mice.

    Science.gov (United States)

    Sumiyoshi, Maho; Kimura, Yoshiyuki

    2009-12-01

    Turmeric (the rhizomes of Curcuma longa L., Zingiberacease) is widely used as a dietary pigment and spice, and has been traditionally used for the treatment of inflammation, skin wounds and hepatic disorders in Ayurvedic, Unani and Chinese medicine. Although the topical application or oral administration of turmeric is used to improve skin trouble, there is no evidence to support this effect. The aim of this study was to clarify whether turmeric prevents chronic ultraviolet B (UVB)-irradiated skin damage. We examined the effects of a turmeric extract on skin damage including changes in skin thickness and elasticity, pigmentation and wrinkling caused by long-term, low-dose ultraviolet B irradiation in melanin-possessing hairless mice. The extract (at 300 or 1000 mg/kg, twice daily) prevented an increase in skin thickness and a reduction in skin elasticity induced by chronic UVB exposure. It also prevented the formation of wrinkles and melanin (at 1000 mg/kg, twice daily) as well as increases in the diameter and length of skin blood vessels and in the expression of matrix metalloproteinase-2 (MMP-2). Prevention of UVB-induced skin aging by turmeric may be due to the inhibition of increases in MMP-2 expression caused by chronic irradiation.

  10. Discovery of Nanomolar Desmuramylpeptide Agonists of the Innate Immune Receptor Nucleotide-Binding Oligomerization Domain-Containing Protein 2 (NOD2) Possessing Immunostimulatory Properties.

    Science.gov (United States)

    Gobec, Martina; Tomašič, Tihomir; Štimac, Adela; Frkanec, Ruža; Trontelj, Jurij; Anderluh, Marko; Mlinarič-Raščan, Irena; Jakopin, Žiga

    2018-04-12

    Muramyl dipeptide (MDP), a fragment of bacterial peptidoglycan, has long been known as the smallest fragment possessing adjuvant activity, on the basis of its agonistic action on the nucleotide-binding oligomerization domain-containing protein 2 (NOD2). There is a pressing need for novel adjuvants, and NOD2 agonists provide an untapped source of potential candidates. Here, we report the design, synthesis, and characterization of a series of novel acyl tripeptides. A pivotal structural element for molecular recognition by NOD2 has been identified, culminating in the discovery of compound 9, the most potent desmuramylpeptide NOD2 agonist to date. Compound 9 augmented pro-inflammatory cytokine release from human peripheral blood mononuclear cells in synergy with lipopolysaccharide. Furthermore, it was able to induce ovalbumin-specific IgG titers in a mouse model of adjuvancy. These findings provide deeper insights into the structural requirements of desmuramylpeptides for NOD2-activation and highlight the potential use of NOD2 agonists as adjuvants for vaccines.

  11. Equatorenes: synthesis and properties of chiral naphthalene, phenanthrene, chrysene, and pyrene possessing bis(1-adamantyl) groups at the peri-position.

    Science.gov (United States)

    Yamamoto, Koji; Oyamada, Naohiro; Xia, Sheng; Kobayashi, Yuta; Yamaguchi, Masahiko; Maeda, Hiroaki; Nishihara, Hiroshi; Uchimaru, Tadafumi; Kwon, Eunsang

    2013-11-06

    Chiral polycyclic aromatic hydrocarbons containing bis(1-adamantyl) groups at the peri-positions, named equatorenes, were synthesized in optically pure form starting from optically pure 4,5-bis(1-adamantyl)-8-methoxy-1-naphthol. A sequential Diels-Alder reaction of furan and arynes generated from 1,2-bromotriflates provided tricyclic and tetracyclic epoxides, and acid-catalyzed aromatization gave phenanthrol and chrysenol. Deoxygenation reactions involving the hydrogenolysis of triflates gave 1,8-bis(1-adamantyl)naphthalene, 1,10-bis(1-adamantyl)phenanthrene, and 1,12-bis(1-adamantyl)chrysene. 3,4-Bis(1-adamantyl)pyrene was synthesized from phenanthrol by Sonogashira coupling and Pt-catalyzed cyclization. Essentially no racemization occurred during the synthesis. X-ray analysis indicated the distorted naphthalene moiety possessing the peri-diadamantyl groups and the flat structure of the other benzene rings. UV-vis analysis of the equatorenes showed considerable redshifts compared with that of the corresponding achiral arenes. Electrochemical analysis of the naphthalene and pyrene indicated that the distortion decreased the highest occupied molecular orbital stability with no marked effect on the lowest unoccupied molecular orbital energy level, and the origin was discussed on the basis of calculation results.

  12. Piper betel Linn (betel vine), the maligned Southeast Asian medicinal plant possesses cancer preventive effects: time to reconsider the wronged opinion.

    Science.gov (United States)

    Rai, Manoj P; Thilakchand, Karadka Ramdas; Palatty, Princy L; Rao, Prathima; Rao, Suresh; Bhat, Harshith P; Baliga, Manjeshwar Shrinath

    2011-01-01

    Since antiquity, Piper betel Linn (betel vine; family Piperaceae) has been an important medicinal agent in the various traditional and folk systems of medicine in Southeast Asia countries. The leaves are the most valued plant part and in the past were routinely used as a chewing agent to prevent halitosis. The leaves are also supposed to harden the gum, conserve the teeth and to prevent indigestion, bronchitis, constipation, congestion, coughs and asthma. Innumerable scientific studies have validated the ethnomedicinal claims. Betel leaves are an integral component of the betel quid that consists of areca nut (Areca catechu Linn.), tobacco (Nicotiana tabacum L) and slaked lime; a highly abused agent with carcinogenic properties. Regular chewing of betel quid is associated mainly with oral cancer and detail studies with individual constituents of the quid have shown that both tobacco and areca nut are carcinogenic, while slaked lime is shown to promote the process of carcinogenesis. However unlike other constituents of the betel quid, the betel leaves devoid carcinogenic effects and on the contrary possesses cancer preventive effects including against the carcinogens present in tobacco. This review for the first time provides information on cancer preventive effects and also addresses the various mechanisms which might be involved.

  13. Multiple viral/self immunological cross-reactivity in liver kidney microsomal antibody positive hepatitis C virus infected patients is associated with the possession of HLA B51.

    Science.gov (United States)

    Bogdanos, D-P; Lenzi, M; Okamoto, M; Rigopoulou, E I; Muratori, P; Ma, Y; Muratori, L; Tsantoulas, D; Mieli- Vergani, G; Bianchi, F B; Vergani, D

    2004-01-01

    Liver Kidney Microsomal autoantibody type 1(LKM1) directed to cytochrome P4502D6 (CYP2D6) characterises autoimmune hepatitis type-2 (AIH-2), but is also found in a proportion of chronic hepatitis C virus (HCV) infected patients, CYP2D6252-271 being a major B- cell autoepitope. Molecular mimicry and immunological cross-reactivity between CYP2D6252-271, HCV polyprotein and the infected cell protein 4 (ICP4) of herpes simplex virus type 1 (HSV-1) have been suggested as triggers for the induction of LKM1, but reactivity and cross-reactivity to the relevant sequences have not been investigated experimentally. CYP2D6252-271 and its viral homologues were constructed and tested by ELISA in the sera of 46 chronically infected HCV patients, 23 of whom were LKM1 positive. Reactivity to the E1 HCV and ICP4 HSV1 mimics was frequently found in HCV infected patients irrespectively of their LKM1 status; viral/self cross-reactivity (as indicated by inhibition studies), however, was present in the only 2 of the 23 LKM1 seropositive HCV patients, who possessed the HLA allotype B51. Our results indicate that in HCV infected patients virus/self cross-reactivity is dependent on a specific immunogenetic background, a finding awaiting confirmation by studies in larger series of patients.

  14. A ‘new lease of life’: FnCpf1 possesses DNA cleavage activity for genome editing in human cells

    Science.gov (United States)

    Tu, Mengjun; Lin, Li; Cheng, Yilu; He, Xiubin; Sun, Huihui; Xie, Haihua; Fu, Junhao; Liu, Changbao; Li, Jin; Chen, Ding; Xi, Haitao; Xue, Dongyu; Liu, Qi; Zhao, Junzhao; Gao, Caixia; Song, Zongming; Qu, Jia

    2017-01-01

    Abstract Cpf1 nucleases were recently reported to be highly specific and programmable nucleases with efficiencies comparable to those of SpCas9. AsCpf1 and LbCpf1 require a single crRNA and recognize a 5′-TTTN-3′ protospacer adjacent motif (PAM) at the 5′ end of the protospacer for genome editing. For widespread application in precision site-specific human genome editing, the range of sequences that AsCpf1 and LbCpf1 can recognize is limited due to the size of this PAM. To address this limitation, we sought to identify a novel Cpf1 nuclease with simpler PAM requirements. Specifically, here we sought to test and engineer FnCpf1, one reported Cpf1 nuclease (FnCpf1) only requires 5′-TTN-3′ as a PAM but does not exhibit detectable levels of nuclease-induced indels at certain locus in human cells. Surprisingly, we found that FnCpf1 possesses DNA cleavage activity in human cells at multiple loci. We also comprehensively and quantitatively examined various FnCpf1 parameters in human cells, including spacer sequence, direct repeat sequence and the PAM sequence. Our study identifies FnCpf1 as a new member of the Cpf1 family for human genome editing with distinctive characteristics, which shows promise as a genome editing tool with the potential for both research and therapeutic applications. PMID:28977650

  15. 78 FR 38953 - Procurement List Additions

    Science.gov (United States)

    2013-06-28

    ... Blind or Severely Disabled published notices of proposed additions to the Procurement List. After... Punch, Paper, Desktop, 3-Hole, Adjustable, 11 sheet capacity, Metallic Base, Black Grip. Coverage: A...

  16. 78 FR 12295 - Procurement List; Additions

    Science.gov (United States)

    2013-02-22

    ... published notices of proposed additions to the Procurement List. After consideration of the material..., 508 Compliant, 12 Digit, Portable, Desktop, Battery Operated NPA: MidWest Enterprises for the Blind...

  17. Laser-based additive manufacturing of metals

    CSIR Research Space (South Africa)

    Kumar, S

    2010-11-01

    Full Text Available For making metallic products through Additive Manufacturing (AM) processes, laser-based systems play very significant roles. Laser-based processes such as Selective Laser Melting (SLM) and Laser Engineered Net Shaping (LENS) are dominating processes...

  18. Additively Manufactured Ceramic Rocket Engine Components

    Data.gov (United States)

    National Aeronautics and Space Administration — HRL Laboratories, LLC, with Vector Space Systems (VSS) as subcontractor, has a 24-month effort to develop additive manufacturing technology for reinforced ceramic...

  19. 7 CFR 955.91 - Additional parties.

    Science.gov (United States)

    2010-01-01

    ... Marketing Agreement § 955.91 Additional parties. After the effective date thereof, any handler may become a... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... then be effective as to such new contracting party. ...

  20. Non-additive measure and integral

    CERN Document Server

    Denneberg, Dieter

    1994-01-01

    Non-Additive Measure and Integral is the first systematic approach to the subject. Much of the additive theory (convergence theorems, Lebesgue spaces, representation theorems) is generalized, at least for submodular measures which are characterized by having a subadditive integral. The theory is of interest for applications to economic decision theory (decisions under risk and uncertainty), to statistics (including belief functions, fuzzy measures) to cooperative game theory, artificial intelligence, insurance, etc. Non-Additive Measure and Integral collects the results of scattered and often isolated approaches to non-additive measures and their integrals which originate in pure mathematics, potential theory, statistics, game theory, economic decision theory and other fields of application. It unifies, simplifies and generalizes known results and supplements the theory with new results, thus providing a sound basis for applications and further research in this growing field of increasing interest. It also co...

  1. Nonparametric additive regression for repeatedly measured data

    KAUST Repository

    Carroll, R. J.; Maity, A.; Mammen, E.; Yu, K.

    2009-01-01

    We develop an easily computed smooth backfitting algorithm for additive model fitting in repeated measures problems. Our methodology easily copes with various settings, such as when some covariates are the same over repeated response measurements

  2. Caustic addition system operability test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Parazin, R.E.

    1994-11-01

    This test procedure provides instructions for performing operational testing of the major components of the 241-AN-107 Caustic Addition System by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E).

  3. Caustic addition system operability test procedure

    International Nuclear Information System (INIS)

    Parazin, R.E.

    1994-11-01

    This test procedure provides instructions for performing operational testing of the major components of the 241-AN-107 Caustic Addition System by WHC and Kaiser personnel at the Rotating Equipment Shop run-in pit (Bldg. 272E)

  4. 78 FR 40727 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-07-08

    ... for addition to the Procurement List for production by the nonprofit agencies listed: Products Towel.... 12/BX Cleaner, Brake Parts NSN: 6850-01-167-0678--17 oz. NPA: The Lighthouse for the Blind, St. Louis...

  5. 78 FR 35874 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-06-14

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products... Cleaner NPA: Winston-Salem Industries for the Blind, Inc., Winston-Salem, NC Contracting Activity: Defense...

  6. Characterizing Polymer Powders used in Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Bajric, Sendin [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-16

    These are a set of slides that give the personal background of the author, information about his LANL organization, and information about his internship project at LANL about additive manufacturing and selective laser sintering (SLS).

  7. Additive Manufacturing of Magnesium (Mg) Alloys

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed work is to investigate additive manufacturing techniques for Mg alloys.  It will leverage off research being conducted at University of Florida and...

  8. 78 FR 9386 - Procurement List; Addition

    Science.gov (United States)

    2013-02-08

    ... Purchase From People Who Are Blind or Severely Disabled published notice of proposed addition to the...: Enterprise Professional Services, Inc., Austin, TX Contracting Activity: Dept of the Army, W40M USA MEDCOM...

  9. 77 FR 55195 - Procurement List; Additions

    Science.gov (United States)

    2012-09-07

    ... Purchase From People Who Are Blind or Severely Disabled published notice of proposed additions to the... Harmon Avenue, Fort Stewart, GA. NPA: Professional Contract Services, Inc., Austin, TX. Contracting...

  10. Additional symmetries of supersymmetric KP hierarchies

    International Nuclear Information System (INIS)

    Stanciu, S.

    1994-01-01

    We investigate the additional symmetries of several supersymmetric KP hierarchies: the SKP hierarchy of Manin and Radul, the SKP 2 hierarchy, and the Jacobian SKP hierarchy. In all three cases we find that the algebra of symmetries is isomorphic to the algebra of superdifferential operators, or equivalently SW 1+∞ . These results seem to suggest that despite their realization depending on the dynamics, the additional symmetries are kinematical in nature. (orig.)

  11. Finding phosphorus containing additives in manufactured foods

    OpenAIRE

    Lloyd, Lyn; Gillanders, Lyn

    2012-01-01

    Dietary phosphorous (P) intake is associated with an increased serum phosphate level which is a risk factor for cardiovascular disease and increased mortality for people with chronic kidney disease. Dietary restriction of P is an important nutrition intervention as about 50% of daily intake of P is from P–containing food additives. Educating patients on P additives can effectively reduce serum P values over standard care. Avoidance can be achieved by reading the ingredient list to check for o...

  12. Challenges in Additive Manufacturing of Alumina

    OpenAIRE

    Gonzalez, Hugo

    2016-01-01

    Additive manufacturing is seen by many as the holy grail of manufacturing, the ability to produce parts nearly autonomously. Adding material rather than removing it would eliminate the need for expensive resources and machining. The recent expiration of key 3D printing patents has led to many advances in the field and has dramatically lowered the prices of 3D printers, making them accessible to the average individual. The one area where additive manufacturing is still in its infancy is in cer...

  13. Design and additive manufacture for flow chemistry.

    Science.gov (United States)

    Capel, Andrew J; Edmondson, Steve; Christie, Steven D R; Goodridge, Ruth D; Bibb, Richard J; Thurstans, Matthew

    2013-12-07

    We review the use of additive manufacturing (AM) as a novel manufacturing technique for the production of milli-scale reactor systems. Five well-developed additive manufacturing techniques: stereolithography (SL), multi-jet modelling (MJM), selective laser melting (SLM), laser sintering (LS) and fused deposition modelling (FDM) were used to manufacture a number of miniaturised reactors which were tested using a range of organic and inorganic reactions.

  14. Material Database for Additive Manufacturing Techniques

    Science.gov (United States)

    2017-12-01

    components in the field. II. BACKGROUND Additive manufacturing is a rapidly maturing process by which digital 3-D design data are used to build up...improves readiness by offering on-demand low-rate production [8, 9]. 3-D printing also enables rapid design iterations and complexity, which improve...abundant in additive manufacturing , allowing design freedom that is only limited by the material strength requirements. A set of eight conductive

  15. Graphene with outstanding anti-irradiation capacity as multialkylated cyclopentanes additive toward space application

    Science.gov (United States)

    Fan, Xiaoqiang; Wang, Liping

    2015-07-01

    Multialkylated cyclopentanes (MACs), a class of synthetic hydrocarbon fluid have attracted intensive interest as possible space lubricants due to a series of unique physical and chemical properties. Here, we used graphene with high mechanical strength and chemical inertness as lubricant additive to explore its potential for space application. The effects of space irradiation on graphene and the tribological properties of graphene as lubricant additive were firstly investigated in detail under simulated space environment composed of high vacuum, high/low temperature and irradiation. Results demonstrate that graphene not only possesses outstanding anti-irradiation capacity but also significantly improves the space performance and tribological properties of MACs, which depends on the excellent physicochemical properties and high load-carrying ability of graphene as well as more effective separation of the sliding surfaces.

  16. Structure and mechanical properties of TiZr binary alloy after Al addition

    International Nuclear Information System (INIS)

    Jiang, X.J.; Jing, R.; Liu, C.Y.; Ma, M.Z.; Liu, R.P.

    2013-01-01

    Microstructure and mechanical properties of hot-rolled TiZrAl alloys were studied. The results showed that the microstructure of all alloys mainly consisted of lamellar α phase. The thickness of the lamellar α phase gradually increased with increasing aluminum content. Moreover, large numbers of stacking faults was observed in Ti–25Zr–15Al (at%) alloy. The aluminum addition strongly affected the mechanical properties of the TiZrAl alloys. With increased aluminum contents, the strength increased evidently, whereas, the elongation decreased. Ti–25Zr–15Al (at%) with the highest aluminum contents in all alloys, possessed the highest tensile strength (σ b =1319 MPa), i.e. strengthened by 41% compared with Ti–25Zr (at%) alloy, and still retained the elongation of 5.5%. According to the classical size and/or modulus misfits model, the effect of aluminum addition was significant in TiZr alloys because of the considerable misfits between aluminum and zirconium

  17. Evaluation of certain food additives and contaminants.

    Science.gov (United States)

    2013-01-01

    This report represents the conclusions of a Joint FAO/WHO Expert Committee convened to evaluate the safety of various food additives and a food contaminant with a view to concluding as to safety concerns and to preparing specifications for identity and purity. The first part of the report contains a general discussion of the principles governing the toxicological evaluation of and assessment of dietary exposure to food additives. A summary follows of the Committee's evaluations of technical, toxicological and dietary exposure data for seven food additives (advantame; glucoamylase from Trichoderma reesei expressed in Trichoderma reesei; glycerol ester of gum rosin; glycerol ester of tall oil rosin; glycerol ester of wood rosin; nisin; and octenyl succinic acid modified gum arabic) and an assessment of dietary exposure to cadmium from cocoa and cocoa products. Specifications for the following food additives were revised: annatto extracts (solvent-extracted bixin and solvent-extracted norbixin); Benzoe tonkinensis; food additives containing aluminium and/or silicon; mineral oil (medium viscosity); modified starches; paprika extract; phosphates (analytical methods for the determination of phosphorus and revision of specifications); 3-phytase from Aspergillus niger expressed in Aspergillus niger; potassium aluminium silicate; and potassium aluminium silicate-based pearlescent pigments. Annexed to the report are tables summarizing the Committee's recommendations for dietary exposures to and toxicological evaluations of the food additives and contaminant considered.

  18. The Development of Korea Additional Protocol System

    International Nuclear Information System (INIS)

    Shim, Hye Won; Yeo, Jin Kyun

    2008-01-01

    The Agreement between the Republic of Korea (ROK) and the IAEA for the Application of Safeguards in Connection with the Treaty on the Non-Proliferation of Nuclear Weapons (the Safeguards Agreement) entered into force on 14 November 1975. The Additional Protocol to the Safeguards Agreement (the Additional Protocol) was signed on 21 June 1999 and entered into force on 19 February 2004. ROK has been submitting annual updated reports of initial declaration on every May 15th since August 2004. Additional protocol reports were submitted through Protocol Reporter provided by IAEA. Annual declarations were simply uploaded and stored in the Accounting Information Treatment System of KINAC, which did not provide data analysis and management function. There have been demands for improvement to handle ever-increasing information. KAPS (Korea Additional Protocol System) has been developed to assist and administrate the additional protocol related works effectively. The new system enables integrated management including composition of additional protocol report and version control, periodical update of related information, results of IAEA complementary access to each facility

  19. Additive effects in radiation grafting and curing

    International Nuclear Information System (INIS)

    Viengkhou, V.; Ng, L.

    1996-01-01

    Full text: Detailed studies on the accelerative effect of novel additives in radiation grafting and curing using acrylated monomer/oligomer systems have been performed in the presence of ionising radiation and UV as sources. Methyl methacrylate (MMA) is used as typical monomer for these grafting studies in the presence of the additives with model backbone polymers, cellulose and propropylene. Additives which have been found to accelerate these grafting processes are: mineral acid, occlusion compounds like urea, thermal initiators and photoinitiators as well as multifunctional monomers such as multifunctional acrylates. The results from irradiation with gamma rays have also been compared with irradiation from a 90W UV lamp. The role of the above additives in accelerating the analogous process of radiation curing has been investigated. Acrylated urethanes, epoxies and polyesters are used as oligomers together with acrylated monomers in this work with uv lamps of 300 watts/inch as radiation source. In the UV curing process bonding between film and substrate is usually due to physical forces. In the present work the presence of additives are shown to influence the occurrence of concurrent grafting during cure thus affecting the nature of the bonding of the cured film. The conditions under which concurrent grafting with UV can occur will be examined. A mechanism for accelerative effect of these additives in both grafting and curing processes has been proposed involving radiation effects and partitioning phenomena

  20. BFR Electrolyte Additive Safety and Flammability Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Allcorn, Eric [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-13

    Lithium-ion battery safety is a critical issue in the adoption of the chemistry to larger scale applications such as transportation and stationary storage. One of the critical components impacting the safety of lithium-ion batteries is their use of highly flammable organic electrolytes. In this work, brominated flame retardants (BFR’s) – an existing class of flame retardant materials – are incorporated as additives to lithium-ion battery electrolytes with the intention to reduce the electrolyte flammability and thereby improve safety. There are a few critical needs for a successful electrolyte additive: solubility in the electrolyte, electrochemical stability over the range of battery operation, and minimal detrimental effects on battery performance. Those detrimental effects can take the form of electrolyte specific impacts, such as a reduction in conductivity, or electrode impacts, such as SEI-layer modification or chemical instability to the active material. In addition to these needs, the electrolyte additive also needs to achieve its intended purpose, which in this case is to reduce the flammability of the electrolyte. For the work conducted as part of this SPP agreement three separate BFR materials were provided by Albemarle to be tested by Sandia as additives in a traditional lithium-ion battery electrolyte. The provided BFR materials were tribromo-neopentyl alcohol, tetrabromo bisphenol A, and tribromoethylene. These materials were incorporated as separate 4 wt.% additives into a traditional lithium-ion battery electrolyte and compared to said traditional electrolyte, designated Gen2.

  1. Immature osteoblastic MG63 cells possess two calcitonin gene-related peptide receptor subtypes that respond differently to [Cys(Acm)(2,7)] calcitonin gene-related peptide and CGRP(8-37).

    Science.gov (United States)

    Kawase, Tomoyuki; Okuda, Kazuhiro; Burns, Douglas M

    2005-10-01

    Calcitonin gene-related peptide (CGRP) is clearly an anabolic factor in skeletal tissue, but the distribution of CGRP receptor (CGRPR) subtypes in osteoblastic cells is poorly understood. We previously demonstrated that the CGRPR expressed in osteoblastic MG63 cells does not match exactly the known characteristics of the classic subtype 1 receptor (CGRPR1). The aim of the present study was to further characterize the MG63 CGRPR using a selective agonist of the putative CGRPR2, [Cys(Acm)(2,7)]CGRP, and a relatively specific antagonist of CGRPR1, CGRP(8-37). [Cys(Acm)(2,7)]CGRP acted as a significant agonist only upon ERK dephosphorylation, whereas this analog effectively antagonized CGRP-induced cAMP production and phosphorylation of cAMP response element-binding protein (CREB) and p38 MAPK. Although it had no agonistic action when used alone, CGRP(8-37) potently blocked CGRP actions on cAMP, CREB, and p38 MAPK but had less of an effect on ERK. Schild plot analysis of the latter data revealed that the apparent pA2 value for ERK is clearly distinguishable from those of the other three plots as judged using the 95% confidence intervals. Additional assays using 3-isobutyl-1-methylxanthine or the PKA inhibitor N-(2-[p-bromocinnamylamino]ethyl)-5-isoquinolinesulfonamide hydrochloride (H-89) indicated that the cAMP-dependent pathway was predominantly responsible for CREB phosphorylation, partially involved in ERK dephosphorylation, and not involved in p38 MAPK phosphorylation. Considering previous data from Scatchard analysis of [125I]CGRP binding in connection with these results, these findings suggest that MG63 cells possess two functionally distinct CGRPR subtypes that show almost identical affinity for CGRP but different sensitivity to CGRP analogs: one is best characterized as a variation of CGRPR1, and the second may be a novel variant of CGRPR2.

  2. Comprehensive behavioral analysis of mice deficient in Rapgef2 and Rapgef6, a subfamily of guanine nucleotide exchange factors for Rap small GTPases possessing the Ras/Rap-associating domain.

    Science.gov (United States)

    Maeta, Kazuhiro; Hattori, Satoko; Ikutomo, Junji; Edamatsu, Hironori; Bilasy, Shymaa E; Miyakawa, Tsuyoshi; Kataoka, Tohru

    2018-05-10

    Rapgef2 and Rapgef6 define a subfamily of guanine nucleotide exchange factors for Rap small GTPases, characterized by the possession of the Ras/Rap-associating domain. Previous genomic analyses suggested their possible involvement in the etiology of schizophrenia. We recently demonstrated the development of an ectopic cortical mass (ECM), which resembles the human subcortical band heterotopia, in the dorsal telencephalon-specific Rapgef2 conditional knockout (Rapgef2-cKO) brains. Additional knockout of Rapgef6 in Rapgef2-cKO mice resulted in gross enlargement of the ECM whereas knockout of Rapgef6 alone (Rapgef6-KO) had no discernible effect on the brain morphology. Here, we performed a battery of behavioral tests to examine the effects of Rapgef2 or Rapgef6 deficiency on higher brain functions. Rapgef2-cKO mice exhibited hyperlocomotion phenotypes. They showed decreased anxiety-like behavior in the elevated plus maze and the open-field tests as well as increased depression-like behavior in the Porsolt forced swim and tail suspension tests. They also exhibited increased sociability especially in novel environments. They showed defects in cognitive function as evidenced by reduced learning ability in the Barnes circular maze test and by impaired working memory in the T maze tests. In contrast, although Rapgef6 and Rapgef2 share similarities in biochemical roles, Rapgef6-KO mice exhibited mild behavioral abnormalities detected with a number of behavioral tests, such as hyperlocomotion phenotype in the open-field test and the social interaction test with a novel environment and working-memory defects in the T-maze test. In conclusion, although there were differences in their brain morphology and the magnitude of the behavioral abnormalities, Rapgef2-cKO mice and Rapgef6-KO mice exhibited hyperlocomotion phenotype and working-memory defect, both of which could be recognized as schizophrenia-like behavior.

  3. 2',4-Dihydroxy-3',4',6'-trimethoxychalcone from Chromolaena odorata possesses anti-inflammatory effects via inhibition of NF-κB and p38 MAPK in lipopolysaccharide-activated RAW 264.7 macrophages.

    Science.gov (United States)

    Dhar, Rana; Kimseng, Rungruedee; Chokchaisiri, Ratchanaporn; Hiransai, Poonsit; Utaipan, Tanyarath; Suksamrarn, Apichart; Chunglok, Warangkana

    2018-02-01

    Immune dysregulation has been implicated in the pathogenesis of many diseases. Macrophages play a crucial role contributing to the onset, progression, and resolution of inflammation. Macrophage inflammatory mediators are of considerable interest as potential targets to treat inflammatory diseases. The present study was conducted to elucidate the anti-inflammatory mechanism of 2',4-dihydroxy-3',4',6'-trimethoxychalcone (1), the major chalcone isolated from Chromolaena odorata (L.) R.M.King & H.Rob, against lipopolysaccharide (LPS)-induced inflammation in RAW 264.7 macrophages. Cell viability, nitric oxide (NO), and proinflammatory cytokines of LPS-activated RAW 264.7 cells were measured by MTT, Griess, and ELISA assays, respectively. Cell lysates were subjected to Western blotting for investigation of protein expression. Treatment with the major chalcone 1 significantly attenuated the production of NO and proinflammatory cytokines, tumor necrosis factor-α, interleukin-1β, and interleukin-6 in a dose-dependent manner. The chalcone suppressed nuclear factor-κB (NF-κB) stimulation by preventing activation of inhibitor κB kinase (IKK) α/β, degradation of inhibitor κB (IκB) α, and translocation of p65 NF-κB into the nucleus. Additionally, the chalcone markedly repressed the phosphorylation of p38 mitogen-activated protein kinase (MAPK), but no further inhibition was detected for c-Jun N-terminal activated kinases or extracellular regulated kinases. Thus, suppression of NF-κB and p38 MAPK activation may be the core mechanism underlying the anti-inflammatory activity of 2',4-dihydroxy-3',4',6'-trimethoxychalcone (1). These findings provide evidence that 2',4-dihydroxy-3',4',6'-trimethoxychalcone (1) possesses anti-inflammatory activity via targeting proinflammatory macrophages. This anti-inflammatory chalcone is a promising compound for reducing inflammation.

  4. Additive manufacturing in production: challenges and opportunities

    Science.gov (United States)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  5. Study of zirconium-addition binary systems

    International Nuclear Information System (INIS)

    Wozniakova, B.; Kuchar, L.

    1975-01-01

    The curves are given of the solid and the liquid of binary zirconium-addition systems. Most additions reduce the melting temperature of zirconium. The only known additions to increase the melting temperature are nitrogen, oxygen and hafnium. Also given are the transformation curves of the systems and the elements are given which reduce or raise the temperature of α-β transformation. From the Mendeleev table into which are plotted the curves of the solid and the liquid of binary systems it is possible to predict the properties of unknown binary systems. For the calculations of the curves of the solid and the liquid, 1860 degC was taken as the temperature of zirconium melting. For the calculations of transformation curves, 865 degC was taken as the temperature of α-β transformation. The equations are given of the curves of the solid and the liquid and of the transformation curves of some Zr-addition systems. Also given are the calculated equilibrium distribution coefficients and the equilibrium distribution coefficients of the transformation of additions in Zr and their limit values for temperatures approximating the melting point or the temperature of the transformation of pure Zr, and the values pertaining to eutectic and peritectic or eutectoid and peritectoid temperatures. (J.B.)

  6. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  7. Terminal addition in a cellular world.

    Science.gov (United States)

    Torday, J S; Miller, William B

    2018-07-01

    Recent advances in our understanding of evolutionary development permit a reframed appraisal of Terminal Addition as a continuous historical process of cellular-environmental complementarity. Within this frame of reference, evolutionary terminal additions can be identified as environmental induction of episodic adjustments to cell-cell signaling patterns that yield the cellular-molecular pathways that lead to differing developmental forms. Phenotypes derive, thereby, through cellular mutualistic/competitive niche constructions in reciprocating responsiveness to environmental stresses and epigenetic impacts. In such terms, Terminal Addition flows according to a logic of cellular needs confronting environmental challenges over space-time. A reconciliation of evolutionary development and Terminal Addition can be achieved through a combined focus on cell-cell signaling, molecular phylogenies and a broader understanding of epigenetic phenomena among eukaryotic organisms. When understood in this manner, Terminal Addition has an important role in evolutionary development, and chronic disease might be considered as a form of 'reverse evolution' of the self-same processes. Copyright © 2017. Published by Elsevier Ltd.

  8. Non-additive Effects in Genomic Selection

    Directory of Open Access Journals (Sweden)

    Luis Varona

    2018-03-01

    Full Text Available In the last decade, genomic selection has become a standard in the genetic evaluation of livestock populations. However, most procedures for the implementation of genomic selection only consider the additive effects associated with SNP (Single Nucleotide Polymorphism markers used to calculate the prediction of the breeding values of candidates for selection. Nevertheless, the availability of estimates of non-additive effects is of interest because: (i they contribute to an increase in the accuracy of the prediction of breeding values and the genetic response; (ii they allow the definition of mate allocation procedures between candidates for selection; and (iii they can be used to enhance non-additive genetic variation through the definition of appropriate crossbreeding or purebred breeding schemes. This study presents a review of methods for the incorporation of non-additive genetic effects into genomic selection procedures and their potential applications in the prediction of future performance, mate allocation, crossbreeding, and purebred selection. The work concludes with a brief outline of some ideas for future lines of that may help the standard inclusion of non-additive effects in genomic selection.

  9. Additive Manufacturing of Metastable Beta Titanium Alloys

    Science.gov (United States)

    Yannetta, Christopher J.

    Additive manufacturing processes of many alloys are known to develop texture during the deposition process due to the rapid reheating and the directionality of the dissipation of heat. Titanium alloys and with respect to this study beta titanium alloys are especially susceptible to these effects. This work examines Ti-20wt%V and Ti-12wt%Mo deposited under normal additive manufacturing process parameters to examine the texture of these beta-stabilized alloys. Both microstructures contained columnar prior beta grains 1-2 mm in length beginning at the substrate with no visible equiaxed grains. This microstructure remained constant in the vanadium system throughout the build. The microstructure of the alloy containing molybdenum changed from a columnar to an equiaxed structure as the build height increased. Eighteen additional samples of the Ti-Mo system were created under different processing parameters to identify what role laser power and travel speed have on the microstructure. There appears to be a correlation in alpha lath size and power density. The two binary alloys were again deposited under the same conditions with the addition of 0.5wt% boron to investigate the effects an insoluble interstitial alloying element would have on the microstructure. The size of the prior beta grains in these two alloys were reduced with the addition of boron by approximately 50 (V) and 100 (Mo) times.

  10. Fuel and Additive Characterization for HCCI Combustion

    International Nuclear Information System (INIS)

    Aceves, S M; Flowers, D; Martinez-Frias, J; Espinosa-Loza, F; Pitz, W J; Dibble, R

    2003-01-01

    This paper shows a numerical evaluation of fuels and additives for HCCl combustion. First, a long list of candidate HCCl fuels is selected. For all the fuels in the list, operating conditions (compression ratio, equivalence ratio and intake temperature) are determined that result in optimum performance under typical operation for a heavy-duty engine. Fuels are also characterized by presenting Log(p)-Log(T) maps for multiple fuels under HCCl conditions. Log(p)-Log(T) maps illustrate important processes during HCCl engine operation, including compression, low temperature heat release and ignition. Log(p)-Log(T) diagrams can be used for visualizing these processes and can be used as a tool for detailed analysis of HCCl combustion. The paper also includes a ranking of many potential additives. Experiments and analyses have indicated that small amounts (a few parts per million) of secondary fuels (additives) may considerably affect HCCl combustion and may play a significant role in controlling HCCl combustion. Additives are ranked according to their capability to advance HCCl ignition. The best additives are listed and an explanation of their effect on HCCl combustion is included

  11. Excessive Additive Effect On Engine Oil Viscosity

    Directory of Open Access Journals (Sweden)

    Vojtěch Kumbár

    2014-01-01

    Full Text Available The main goal of this paper is excessive additive (for oil filling effect on engine oil dynamic viscosity. Research is focused to commercially distribute automotive engine oil with viscosity class 15W–40 designed for vans. There were prepared blends of new and used engine oil without and with oil additive in specific ratio according manufacturer’s recommendations. Dynamic viscosity of blends with additive was compared with pure new and pure used engine oil. The temperature dependence dynamic viscosity of samples was evaluated by using rotary viscometer with standard spindle. Concern was that the oil additive can moves engine oil of several viscosity grades up. It is able to lead to failure in the engine. Mathematical models were used for fitting experimental values of dynamic viscosity. Exponential fit function was selected, which was very accurate because the coefficient of determination R2 achieved high values (0.98–0.99. These models are able to predict viscosity behaviour blends of engine oil and additive.

  12. Chimeric NDP-MSH and MTII melanocortin peptides with agouti-related protein (AGRP) Arg-Phe-Phe amino acids possess agonist melanocortin receptor activity.

    Science.gov (United States)

    Joseph, Christine G; Wilczynski, Andrzej; Holder, Jerry R; Xiang, Zhimin; Bauzo, Rayna M; Scott, Joseph W; Haskell-Luevano, Carrie

    2003-12-01

    Agouti-related protein (AGRP) is one of only two known endogenous antagonists of G-protein coupled receptors (GPCRs). Specifically, AGRP antagonizes the brain melanocortin-3 and -4 receptors involved in energy homeostasis, regulation of feeding behavior, and obesity. Alpha-melanocyte stimulating hormone (alpha-MSH) is one of the known endogenous agonists for these receptors. It has been hypothesized that the Arg-Phe-Phe (111-113) human AGRP amino acids may be mimicking the melanocortin agonist Phe-Arg-Trp (7-9) residue interactions with the melanocortin receptors that are important for both receptor molecular recognition and stimulation. To test this hypothesis, we generated thirteen chimeric peptide ligands based upon the melanocortin agonist peptides NDP-MSH (Ac-Ser-Tyr-Ser-Nle4-Glu-His-DPhe-Arg-Trp-Gly-Lys-Pro-Val-NH2) and MTII (Ac-Nle-c[Asp-His-DPhe-Arg-Trp-Lys]-NH2). In these chimeric ligands, the agonist DPhe-Arg-Trp amino acids were replaced by the AGRP Arg-Phe-Phe residues, and resulted in agonist activity at the mouse melanocortin receptors (mMC1R and mMC3-5Rs), supporting the hypothesis that the AGRP antagonist ligand Arg-Phe-Phe residues mimic the agonist Phe-Arg-Trp amino acids. Interestingly, the Ac-Ser-Tyr-Ser-Nle4-Glu-His-Arg-DPhe-Phe-Gly-Lys-Pro-Val-NH2 peptide possessed 7 nM mMC1R agonist potency, and is 850-fold selective for the mMC1R versus the mMC3R, 2300-fold selective for the mMC1R versus the mMC4R, and 60-fold selective for the MC1R versus the mMC5R, resulting in the discovery of a new peptide template for the design of melanocortin receptor selective ligands.

  13. Atypical Thioredoxins in Poplar: The Glutathione-Dependent Thioredoxin-Like 2.1 Supports the Activity of Target Enzymes Possessing a Single Redox Active Cysteine1[W

    Science.gov (United States)

    Chibani, Kamel; Tarrago, Lionel; Gualberto, José Manuel; Wingsle, Gunnar; Rey, Pascal; Jacquot, Jean-Pierre; Rouhier, Nicolas

    2012-01-01

    Plant thioredoxins (Trxs) constitute a complex family of thiol oxidoreductases generally sharing a WCGPC active site sequence. Some recently identified plant Trxs (Clot, Trx-like1 and -2, Trx-lilium1, -2, and -3) display atypical active site sequences with altered residues between the two conserved cysteines. The transcript expression patterns, subcellular localizations, and biochemical properties of some representative poplar (Populus spp.) isoforms were investigated. Measurements of transcript levels for the 10 members in poplar organs indicate that most genes are constitutively expressed. Using transient expression of green fluorescent protein fusions, Clot and Trx-like1 were found to be mainly cytosolic, whereas Trx-like2.1 was located in plastids. All soluble recombinant proteins, except Clot, exhibited insulin reductase activity, although with variable efficiencies. Whereas Trx-like2.1 and Trx-lilium2.2 were efficiently regenerated both by NADPH-Trx reductase and glutathione, none of the proteins were reduced by the ferredoxin-Trx reductase. Only Trx-like2.1 supports the activity of plastidial thiol peroxidases and methionine sulfoxide reductases employing a single cysteine residue for catalysis and using a glutathione recycling system. The second active site cysteine of Trx-like2.1 is dispensable for this reaction, indicating that the protein possesses a glutaredoxin-like activity. Interestingly, the Trx-like2.1 active site replacement, from WCRKC to WCGPC, suppresses its capacity to use glutathione as a reductant but is sufficient to allow the regeneration of target proteins employing two cysteines for catalysis, indicating that the nature of the residues composing the active site sequence is crucial for substrate selectivity/recognition. This study provides another example of the cross talk existing between the glutathione/glutaredoxin and Trx-dependent pathways. PMID:22523226

  14. Urochordate ascidians possess a single isoform of Aurora kinase that localizes to the midbody via TPX2 in eggs and cleavage stage embryos.

    Directory of Open Access Journals (Sweden)

    Celine Hebras

    Full Text Available Aurora kinases are key proteins found throughout the eukaryotes that control mitotic progression. Vertebrate Aurora-A and B kinases are thought to have evolved from a single Aurora-kinase isoform closest to that found in present day urochordates. In urochordate ascidians Aurora binds both TPX2 (a vertebrate AURKA partner and INCENP (a vertebrate AURKB partner and localizes to centrosomes and spindle microtubules as well as chromosomes and midbody during both meiosis and mitosis. Ascidian Aurora also displays this localization pattern during mitosis in echinoderms, strengthening the idea that non-vertebrate deuterostomes such as the urochordates and echinoderms possess a single form of Aurora kinase that has properties of vertebrate Aurora-kinase A and B. In the ascidian, TPX2 localizes to the centrosome and the spindle poles also as in vertebrates. However, we were surprised to find that TPX2 also localized strongly to the midbody in ascidian eggs and embryos. We thus examined more closely Aurora localization to the midbody by creating two separate point mutations of ascidian Aurora predicted to perturb binding to TPX2. Both forms of mutated Aurora behaved as predicted: neither localized to spindle poles where TPX2 is enriched. Interestingly, neither form of mutated Aurora localized to the midbody where TPX2 is also enriched, suggesting that ascidian Aurora midbody localization required TPX2 binding in ascidians. Functional analysis revealed that inhibition of Aurora kinase with a pharmacological inhibitor or with a dominant negative kinase dead form of Aurora caused cytokinesis failure and perturbed midbody formation during polar body extrusion. Our data support the view that vertebrate Aurora-A and B kinases evolved from a single non-vertebrate deuterostome ancestor. Moreover, since TPX2 localizes to the midbody in ascidian eggs and cleavage stage embryos it may be worthwhile re-assessing whether Aurora A kinase or TPX2 localize to the midbody

  15. Who possesses drug resistance genes in the aquatic environment?: sulfamethoxazole (SMX) resistance genes among the bacterial community in water environment of Metro-Manila, Philippines.

    Science.gov (United States)

    Suzuki, Satoru; Ogo, Mitsuko; Miller, Todd W; Shimizu, Akiko; Takada, Hideshige; Siringan, Maria Auxilia T

    2013-01-01

    Recent evidence has shown that antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) are ubiquitous in natural environments, including sites considered pristine. To understand the origin of ARGs and their dynamics, we must first define their actual presence in the natural bacterial assemblage. Here we found varying distribution profiles of sul genes in "colony forming bacterial assemblages" and "natural bacterial assemblages." Our monitoring for antibiotic contamination revealed that sulfamethoxazole (SMX) is a major contaminant in aquatic environments of Metro-Manila, which would have been derived from human and animal use, and subsequently decreased through the process of outflow from source to the sea. The SMX-resistant bacterial rate evaluated by the colony forming unit showed 10 to 86% of the total colony numbers showed higher rates from freshwater sites compared to marine sites. When sul genes were quantified by qPCR, colony-forming bacteria conveyed sul1 and sul2 genes in freshwater and seawater (10(-5)-10(-2) copy/16S) but not sul3. Among the natural bacterial assemblage, all sul1, sul2, and sul3 were detected (10(-5)-10(-3) copy/16S), whereas all sul genes were at an almost non-detectable level in the freshwater assemblage. This study suggests that sul1 and sul2 are main sul genes in culturable bacteria, whereas sul3 is conveyed by non-culturable bacteria in the sea. As a result marine bacteria possess sul1, sul2 and sul3 genes in the marine environment.

  16. Who Possesses Drug Resistance Genes in the Aquatic Environment? : Sulfamethoxazole (SMX Resistance Genes among the Bacterial Community in Water Environment of Metro-Manila, Philippines

    Directory of Open Access Journals (Sweden)

    Satoru eSuzuki

    2013-04-01

    Full Text Available Recent evidence has shown that antibiotic resistant bacteria (ARB and antibiotic resistance genes (ARG are ubiquitous in natural environments, including sites considered pristine. To understand the origin of ARGs and their dynamics, we must first define their actual presence in the natural bacterial assemblage. Here we found varying distribution profiles of sul genes in colony forming bacterial assemblages and natural bacterial assemblages. Our monitoring for antibiotic contamination revealed that sulfamethoxazole (SMX is a major contaminant in aquatic environments of Metro-Manila, which would have been derived from human and animal use, and subsequently decreased through the process of outflow from source to the sea. The SMX-resistant bacterial rate evaluated by the colony forming unit showed 10 to 86 % of the total colony numbers showed higher rates from freshwater sites compared to marine sites. When sul genes were quantified by qPCR, colony-forming bacteria conveyed sul1 and sul2 genes in freshwater and seawater (10-5-10-2 copy/16S but not sul3. Among the natural bacterial assemblage, all sul1, sul2 and sul3 were detected (10-5-10-3 copy/16S, whereas all sul genes were at an almost non-detectable level in the freshwater assemblage. This study suggests that sul1 and sul2 are main sul genes in culturable bacteria, whereas sul3 is conveyed by non-culturable bacteria in the sea. As a result marine bacteria possess sul1, sul2 and sul3 genes in the marine environment.

  17. The Novel N-Substituted Benztropine Analog GA2-50 Possesses Pharmacokinetic and Pharmacodynamic Profiles Favorable for a Candidate Substitute Medication for Cocaine Abuse

    Science.gov (United States)

    OTHMAN, AHMED A.; NEWMAN, AMY H.; EDDINGTON, NATALIE D.

    2009-01-01

    GA2-50 is a novel N-substituted benztropine analog with improved potency and selectivity for the dopamine transporter. The pharmacokinetic and pharmacodynamic properties of GA2-50 were characterized as a part of its preclinical evaluation as a substitute medication for cocaine abuse. In vitro transport and metabolism studies as well as pharmacokinetic studies in rats were conducted. Effect of GA2-50 on the extracelluar nucleus accumbens (NAc) dopamine levels and on cocaine’s induced dopamine elevation was evaluated using intracerebral microdialysis. GA2-50 showed high transcellular permeability despite being a P-glycoprotein substrate. GA2-50 was a substrate of human CYP2D6, CYP2C19, CYP2E1, rat CYP2C11, CYP2D1, CYP3A1, and CYP1A2; with low intrinsic clearance values. In vivo, GA2-50 showed high brain uptake (Ri ~ 10), large volume of distribution (Vss =37 L/kg), and long elimination half-life (t½ =19 h). GA2-50 resulted in 1.6- and 2.7-fold dopamine elevation at the 5 and 10 mg/kg i.v. doses. Dopamine elevation induced by GA2-50 was significantly reduced, slower and longer lasting than previously observed for cocaine. GA2-50 had no significant effect on cocaine’s induced dopamine elevation upon simultaneous administration. Results from the present study indicate that GA2-50 possesses several attributes sought after for a substitute medication for cocaine abuse. PMID:18425847

  18. Biocompatibility of photopolymers for additive manufacturing

    Directory of Open Access Journals (Sweden)

    Leonhardt Stefan

    2016-09-01

    Full Text Available To establish photopolymers for the production of class II or class III medical products by additive manufacturing it is essential to know which components of photopolymeric systems, consisting of monomers, photoinitiators and additives, are the determining factors on their biocompatible properties. In this study the leachable substances of a cured photopolymeric system were eluted and identified by HPLC-MS detection. In addition the cured photopolymer was testes for cytotoxicity and genotoxicity according to DIN EN ISO 10993 for long time applications. The results showed that uncured residual monomers are the determining factor on the biocompatible properties of the photopolymeric system. Strategies to reduce these residual monomers in the cured photopolymer are presented.

  19. Non-additive measures theory and applications

    CERN Document Server

    Narukawa, Yasuo; Sugeno, Michio; 9th International Conference on Modeling Decisions for Artificial Intelligence (MDAI 2012)

    2014-01-01

    This book provides a comprehensive and timely report in the area of non-additive measures and integrals. It is based on a panel session on fuzzy measures, fuzzy integrals and aggregation operators held during the 9th International Conference on Modeling Decisions for Artificial Intelligence (MDAI 2012) in Girona, Spain, November 21-23, 2012. The book complements the MDAI 2012 proceedings book, published in Lecture Notes in Computer Science (LNCS) in 2012. The individual chapters, written by key researchers in the field, cover fundamental concepts and important definitions (e.g. the Sugeno integral, definition of entropy for non-additive measures) as well some important applications (e.g. to economics and game theory) of non-additive measures and integrals. The book addresses students, researchers and practitioners working at the forefront of their field.  

  20. Additive Manufacturing of Shape Memory Alloys

    Science.gov (United States)

    Van Humbeeck, Jan

    2018-04-01

    Selective Laser Melting (SLM) is an additive manufacturing production process, also called 3D printing, in which functional, complex parts are produced by selectively melting patterns in consecutive layers of powder with a laser beam. The pattern the laser beam is following is controlled by software that calculates the pattern by slicing a 3D CAD model of the part to be constructed. Apart from SLM, also other additive manufacturing techniques such as EBM (Electron Beam Melting), FDM (Fused Deposition Modelling), WAAM (Wire Arc Additive Manufacturing), LENS (Laser Engineered Net Shaping such as Laser Cladding) and binder jetting allow to construct complete parts layer upon layer. But since more experience of AM of shape memory alloys is collected by SLM, this paper will overview the potentials, limits and problems of producing NiTi parts by SLM.

  1. Effects from additives on deacetylation of chitin

    International Nuclear Information System (INIS)

    Campana Filho, Sergio P.; Signini, Roberta

    2001-01-01

    Deacetylation reactions of commercial chitin were carried out in aqueous sodium hydroxide solution at 115 deg C for 6 hours. The effect from additives (sodium borohydride or anthraquinone) and of bubbling inert gas (nitrogen or argon) on the characteristics of deacetylated samples were evaluated. Average degrees of acetylation and intrinsic viscosity were determined by 1 H NMR spectroscopy and capillary viscometry, respectively. X-ray diffraction was employed to evaluate changes in crystallinity and infrared spectroscopy was used to monitor structural changes due to deacetylation. The bubbling of inert gas during the deacetylation reaction resulted in more crystalline samples of chitosan. Deacetylation carried out without any additive produced slightly more deacetylated chitosan but they were severely depolymerized. The depolymerization process was much less important when sodium borohydride was added to the reaction medium but the addition of anthraquinone and the bubbling of nitrogen, or argon, did not have any effect, this suggests that oxygen is not required for depolymerization. (author)

  2. Additive Construction with Mobile Emplacement (ACME)

    Science.gov (United States)

    Vickers, John

    2015-01-01

    The Additive Construction with Mobile Emplacement (ACME) project is developing technology to build structures on planetary surfaces using in-situ resources. The project focuses on the construction of both 2D (landing pads, roads, and structure foundations) and 3D (habitats, garages, radiation shelters, and other structures) infrastructure needs for planetary surface missions. The ACME project seeks to raise the Technology Readiness Level (TRL) of two components needed for planetary surface habitation and exploration: 3D additive construction (e.g., contour crafting), and excavation and handling technologies (to effectively and continuously produce in-situ feedstock). Additionally, the ACME project supports the research and development of new materials for planetary surface construction, with the goal of reducing the amount of material to be launched from Earth.

  3. Evaluation of Advanced Polymers for Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Rios, Orlando [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Carter, William G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kutchko, Cindy [PPG Industries, Pittsburgh, PA (United States); Fenn, David [PPG Industries, Pittsburgh, PA (United States); Olson, Kurt [PPG Industries, Pittsburgh, PA (United States)

    2017-09-08

    The goal of this Manufacturing Demonstration Facility (MDF) technical collaboration project between Oak Ridge National Laboratory (ORNL) and PPG Industries, Inc. (PPG) was to evaluate the feasibility of using conventional coatings chemistry and technology to build up material layer-by-layer. The PPG-ORNL study successfully demonstrated that polymeric coatings formulations may overcome many limitations of common thermoplastics used in additive manufacturing (AM), allow lightweight nozzle design for material deposition, and increase build rate. The materials effort focused on layer-by-layer deposition of coatings with each layer fusing together. The combination of materials and deposition results in an additively manufactured build that has sufficient mechanical properties to bear the load of additional layers, yet is capable of bonding across the z-layers to improve build direction strength. The formulation properties were tuned to enable a novel, high-throughput deposition method that is highly scalable, compatible with high loading of reinforcing fillers, and inherently low-cost.

  4. Transfer of Training in Simple Addition.

    Science.gov (United States)

    Chen, Yalin; Campbell, Jamie I D

    2017-04-18

    In recent years several researchers have proposed that skilled adults may solve single-digit addition problems (e.g. 3 + 1 = 4, 4 + 3 = 7) using a fast counting procedure. Practicing a procedure, often leads to transfer of learning and faster performance of unpracticed items. Such transfer has been demonstrated using a counting-based alphabet arithmetic task (e.g., B + 4 = C D E F) that indicated robust generalization of practice (i.e., RT gains) when untrained transfer problems at test had been implicitly practiced (e.g., practice B + 3, test B + 2 or B + 1). Here we constructed analogous simple addition problems (practice 4 + 3, test 4 + 2 or 4 + 1). In each of three experiments (total n = 108) participants received six practice blocks followed by two test blocks of new problems to examine generalization effects. Practice of addition identity-rule problems (i.e., 0 + N = N) showed complete transfer of RT gains made during practice to unpracticed items at test. In contrast, the addition ties (2 + 2, 3 + 3, etc.) presented large RT costs for unpracticed problems at test, but sped up substantially in the second test block. This pattern is consistent with item-specific strengthening of associative memory. The critical items were small non-tie additions (sum ≤ 10) for which the test problems would be implicitly practiced if counting was employed during practice. In all three experiments (and collectively) there was no evidence of generalization for these items in the first test block, but there was robust speed up when the items were repeated in the second test block. Thus, there was no evidence of the generalization of practice that would be expected if counting procedures mediated our participants' performance on small non-tie addition problems.

  5. Studies of alumina additions in zirconia - magnesia

    International Nuclear Information System (INIS)

    Muccillo, R.

    1987-01-01

    Ionic conductivity measurements have been carried out in the 500 0 C - 1000 0 C temperature range in Mg - PSZ (Partially Stabilized Zirconia) with 0.5 to 10 mol % alumina additions. All specimens were prepared by pressing followed by pre - and sintering at 1000 0 C/2h and1450 0 C/4h, respectively. Thermal histerysis of the ionic conductivity have been detected, probably due to phase changes in the Mg-PSZ samples. The results show that alumina additions up to 2.1% enhances densification with no major variations in electrical resistivity values. (Author) [pt

  6. Effusion plate using additive manufacturing methods

    Science.gov (United States)

    Johnson, Thomas Edward; Keener, Christopher Paul; Ostebee, Heath Michael; Wegerif, Daniel Gerritt

    2016-04-12

    Additive manufacturing techniques may be utilized to construct effusion plates. Such additive manufacturing techniques may include defining a configuration for an effusion plate having one or more internal cooling channels. The manufacturing techniques may further include depositing a powder into a chamber, applying an energy source to the deposited powder, and consolidating the powder into a cross-sectional shape corresponding to the defined configuration. Such methods may be implemented to construct an effusion plate having one or more channels with a curved cross-sectional geometry.

  7. Photogrammetry for Repositioning in Additive Manufacturing

    DEFF Research Database (Denmark)

    Jensen, Janus Nørtoft; Lyngby, Rasmus Ahrenkiel; Aanæs, Henrik

    2017-01-01

    In this preliminary work, we present our current status on how to use single camera photogrammetry to determine the orientation of an additively manufactured partly finished object that has been repositioned in the printing chamber, from a single image taken with a calibrated camera, and comparing...... this to the CAD model of the object. We describe how this knowledge can be used to update the machine code of the printer such that printing of the object can be resumed in the new location. This opens possibilities for embedding and assembling foreign parts into the additive manufacturing pipeline, adding...

  8. The structure of additive conservation laws

    International Nuclear Information System (INIS)

    Helmut Reen

    1979-01-01

    All additive conserved quantities are listed for a system with short range central force interaction between the particles: a special case shows up in Boltzmann H-theorem and his derivation of the Maxwell velocity distribution. It is concluded that in classical mechanics of mass points there are no other additive conservation laws besides of energy, momentum, angular momentum and center of mass motion. A generator is considered of a symmetry transformation defined as integral over a conserved local current density where the latter, in general, needs not be covariant under translations

  9. 77 FR 13009 - Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel...

    Science.gov (United States)

    2012-03-05

    ... Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel Pathways Under the Renewable Fuel Standard Program AGENCY: Environmental Protection Agency (EPA). ACTION: Withdrawal... Renewable Fuel Standard program regulations. Because EPA received adverse comment, we are withdrawing the...

  10. 42 CFR 86.20 - Additional conditions.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Additional conditions. 86.20 Section 86.20 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES GRANTS FOR EDUCATION PROGRAMS IN OCCUPATIONAL SAFETY AND HEALTH Occupational Safety and Health Training Grants § 86.2...

  11. 17 CFR 37.7 - Additional requirements.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Additional requirements. 37.7 Section 37.7 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION DERIVATIVES... of section 5c(c) of the Act and § 40.2 of this chapter, derivatives transaction execution facilities...

  12. Additional reactor protection system of RBMK-1500

    International Nuclear Information System (INIS)

    1999-01-01

    Analysis of anticipated transients without scram of RBMK-1500 reactor showed that additional reactor protection system is required. Data of accident analysis in the case of loose of external electric power and loose of vacuum in condensers of turbines are provided

  13. Neue Werkstoffe über additive Fertigung

    OpenAIRE

    Günther, Johannes; Niendorf, Thomas

    2016-01-01

    Über die additive Fertigung, oftmals bezeichnet als 3D-Druck, lassen sich Bauteile nahezu beliebiger geometrischer Komplexität herstellen. Gleichzeitig lassen die Prozessrandbedingungen die direkte Einstellung der Mikrostruktur in den verwendeten metallischen Werkstoffen zu. Hieraus ergeben sich weitreichende Möglichkeiten bezüglich der Eigenschaftsoptimierung aktueller Hochleistungswerkstoffe.

  14. Additive Manufacturing of Biomaterials, Tissues, and Organs

    NARCIS (Netherlands)

    Zadpoor, Amir A; Malda, Jos

    2017-01-01

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further

  15. Additive Manufacturing of Biomaterials, Tissues, and Organs

    NARCIS (Netherlands)

    Zadpoor, Amir A; Malda, Jos|info:eu-repo/dai/nl/412461099

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further

  16. Probabilistic fuzzy systems as additive fuzzy systems

    NARCIS (Netherlands)

    Almeida, R.J.; Verbeek, N.; Kaymak, U.; Costa Sousa, da J.M.; Laurent, A.; Strauss, O.; Bouchon-Meunier, B.; Yager, R.

    2014-01-01

    Probabilistic fuzzy systems combine a linguistic description of the system behaviour with statistical properties of data. It was originally derived based on Zadeh’s concept of probability of a fuzzy event. Two possible and equivalent additive reasoning schemes were proposed, that lead to the

  17. Leaching of Plastic Additives to Marine Organisms

    NARCIS (Netherlands)

    Koelmans, A.A.; Besseling, E.; Foekema, E.M.

    2014-01-01

    It is often assumed that ingestion of microplastics by aquatic species leads to increased exposure to plastic additives. However, experimental data or model based evidence is lacking. Here we assess the potential of leaching of nonylphenol (NP) and bisphenol A (BPA) in the intestinal tracts of

  18. Overview of Food Ingredients, Additives and Colors

    Science.gov (United States)

    ... In addition to maintaining the quality of the food, they help control contamination that can cause foodborne illness, including life-threatening ... still be considered safe. Regulations known as Good Manufacturing ... limit the amount of food ingredients used in foods to the amount necessary ...

  19. Polymeric additive performance in closed whitewater systems

    Science.gov (United States)

    T. H. Wegner

    1984-01-01

    “With more stringent requirements on discharge water quality and with escalating water treatment costs, water recycling within the paper mill is of growing importance. A serious problem resulting from more white-water recycling is reduced drainage and fiber or fines retention because of diminished polymeric additive performance. To provide better insight for overcoming...

  20. 76 FR 80345 - Procurement List; Additions

    Science.gov (United States)

    2011-12-23

    ... ARMY, W6QL ECC MIAMI DIV, MIAMI, FL. Service Type/Location: Industrial Laundry Service, Bureau of... Procurement List. SUMMARY: This action adds services to the Procurement List that will be provided by... concerning capability of qualified nonprofit agencies to provide the services and impact of the additions on...

  1. 78 FR 48656 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-08-09

    ... Oceanic and Atmospheric Administration, Boulder, CO. Service Type/Location: Laundry Service, US Coast... Additions to the Procurement List. SUMMARY: The Committee is proposing to add products and services to the... required to procure the products and services listed below from nonprofit agencies employing persons who...

  2. 77 FR 27736 - Procurement List Additions

    Science.gov (United States)

    2012-05-11

    ... Research Laboratory, Washington, DC. Service Type/Location: Laundry, Refurbishment, and Warehouse Services... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be... products and services and impact of the additions on the current or most recent contractors, the Committee...

  3. 77 FR 29596 - Procurement List Proposed Additions

    Science.gov (United States)

    2012-05-18

    .../Location: Laundry Service, Veterans Administration Medical Center (VAMC), (offsite: 1809 W 2nd Avenue... Additions to the Procurement List. SUMMARY: The Committee is proposing to add products and services to the... identified in this notice will be required to procure the products and services listed below from nonprofit...

  4. 75 FR 14576 - Procurement List Additions

    Science.gov (United States)

    2010-03-26

    ... Inspection Service, Minneapolis, MN. M.R. Laundry Products NSN: MR 1103--Heavy Duty Laundry Bag. NSN: MR 1104... procurement list. SUMMARY: This action adds to the Procurement List products and services to be furnished by... products and services and impact of the additions on the current or most recent contractors, the Committee...

  5. Powder Characterization and Optimization for Additive Manufacturing

    NARCIS (Netherlands)

    Cordova, Laura; Campos, Mónica; Tinga, Tiedo

    2017-01-01

    Achieving the optimal quality for Additive Manufactured (AM) parts does not only depend on setting the right process parameters. Material feedstock also plays an important role when aiming for high performance products. The metal AM processes that are most applicable to industry, Powder Bed Fusion

  6. Augmented Reality Interfaces for Additive Manufacturing

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Frisvad, Jeppe Revall

    2017-01-01

    This paper explores potential use cases for using augmented reality (AR) as a tool to operate industrial machines. As a baseline we use an additive manufacturing system, more commonly known as a 3D printer. We implement novel augmented interfaces and controls using readily available open source...

  7. Designing for Color in Additive Manufacturing

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Luongo, Andrea; Frisvad, Jeppe Revall

    2016-01-01

    In this paper we present a color design pipeline for 3D printed or additively manufactured parts. We demonstrate how to characterize and calibrate a commercial printer and how to obtain its forward and backward color transformation models. We present results from our assistive color design tool...

  8. Additive Manufacturing: From Rapid Prototyping to Flight

    Science.gov (United States)

    Prater, Tracie

    2015-01-01

    Additive manufacturing (AM) offers tremendous promise for the rocket propulsion community. Foundational work must be performed to ensure the safe performance of AM parts. Government, industry, and academia must collaborate in the characterization, design, modeling, and process control to accelerate the certification of AM parts for human-rated flight.

  9. Predicting Color Output of Additive Manufactured Parts

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Aanæs, Henrik

    2015-01-01

    In this paper we address the colorimetric performance of a multicolor additive manufacturing process. A method on how to measure and characterize color performance of said process is presented. Furthermore, a method on predicting the color output is demonstrated, allowing for previsualization...

  10. 78 FR 53734 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-08-30

    ...: Committee for Purchase From People Who Are Blind or Severely Disabled, 1401 S Clark Street, Suite 10800... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  11. 78 FR 77105 - Procurement List; Proposed Addition

    Science.gov (United States)

    2013-12-20

    ... People Who Are Blind or Severely Disabled, 1401 S. Clark Street, Suite 10800, Arlington, Virginia, 22202... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Addition AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  12. 78 FR 50040 - Procurement List, Proposed Additions

    Science.gov (United States)

    2013-08-16

    ... People Who Are Blind or Severely Disabled, 1401 S Clark Street, Suite 10800, Arlington, Virginia, 22202... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List, Proposed Additions AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  13. 78 FR 19248 - Procurement List; Proposed Addition

    Science.gov (United States)

    2013-03-29

    ... Purchase From People Who Are Blind or Severely Disabled, 1401 S. Clark Street, Suite 10800, Arlington... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Proposed Addition AGENCY: Committee for Purchase From People Who Are Blind or Severely Disabled. ACTION: Proposed...

  14. Power transformer additional load losses separation procedure

    Directory of Open Access Journals (Sweden)

    Kostić Miloje M.

    2011-01-01

    Full Text Available The proposed procedure is based on the fact that total transformer losses (PLL1,n, determined by short circuit test, can be separated into two components: the eddy current losses in the windings (PEC1,n and stray flux losses (PSL1,n in iron parts of construction as well as in the transformer tank walls. The total additional load losses, PLLd1 and PLLdh, are determined by short circuit test results, conducted at rated frequency (f1 and at increased harmonic frequency (fh=h*f1. Using so obtained total additional load losses, PLLd1 and PLLdh, which can be expressed in the form PLLdh=PEC1,n*h2 + PSL1,n*h, the corresponding rate additional load losses values PEC1,n and PSL1,n are derived. At the end, for given load with predefined high harmonics content, (Ih/I1n, relative to rated current, the total additional load losses value ΣPLLdh > PLLd1, is found. In such a way all harmonics up to hmax are taken into account.

  15. 19 CFR 191.103 - Additional requirements.

    Science.gov (United States)

    2010-04-01

    ... which the alcohol was withdrawn; (iv) Date of withdrawal; (v) Serial number of the tax-paid stamp or... 19 Customs Duties 2 2010-04-01 2010-04-01 false Additional requirements. 191.103 Section 191.103 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE...

  16. Acid Rain Analysis by Standard Addition Titration.

    Science.gov (United States)

    Ophardt, Charles E.

    1985-01-01

    The standard addition titration is a precise and rapid method for the determination of the acidity in rain or snow samples. The method requires use of a standard buret, a pH meter, and Gran's plot to determine the equivalence point. Experimental procedures used and typical results obtained are presented. (JN)

  17. Additivity properties of a Gaussian channel

    International Nuclear Information System (INIS)

    Giovannetti, Vittorio; Lloyd, Seth

    2004-01-01

    The Amosov-Holevo-Werner conjecture implies the additivity of the minimum Renyi entropies at the output of a channel. The conjecture is proven true for all Renyi entropies of integer order greater than two in a class of Gaussian bosonic channel where the input signal is randomly displaced or where it is coupled linearly to an external environment

  18. Finding phosphorus containing additives in manufactured foods

    Directory of Open Access Journals (Sweden)

    Lyn Lloyd

    2012-06-01

    This reflects manufactured foods in NZ and it is likely that these results could be generalized to countries with similar food patterns and supplies. Quantitative data in manufactured foods is unlikely to be available to guide patient choice so qualitative information of where to find P additives can be helpful.

  19. ADHD Diet: Do Food Additives Cause Hyperactivity?

    Science.gov (United States)

    ... 3 fatty acids found in certain types of fish, flaxseed and other foods. With David C. Agerter, M.D Food colours and hyperactivity. NHS Choices. http://www.nhs.uk/conditions/food-additive-intolerance/Pages/Introduction.aspx. Accessed Sept. 18, 2017. ...

  20. Additivity of quark masses in gauge theories

    International Nuclear Information System (INIS)

    Scadron, M.D.

    1987-01-01

    It is shown that, in spite of the confinement of quarks in (color-singlet) hadrons, effective quark masses of all types (dynamically generated, constituent and current masses), naturally form hadron masses in an additivity fashion. For the purposes of brevity, the discussion is limited primarily to the nonstrange flavor sector

  1. 76 FR 57719 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-09-16

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products NSN: 7930-00-NIB-0583--Refills, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0584--Starter Kit, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0585...

  2. 78 FR 12296 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-02-22

    ... services are proposed for addition to the Procurement List for production by the nonprofit agencies listed... and Trailer Wash, 55 GL NSN: 7930-00-NIB-0649--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 5 GL NSN: 7930-00-NIB-0650--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 55 GL...

  3. Additive manufacturing: From implants to organs

    African Journals Online (AJOL)

    Additive manufacturing (AM) constructs 3D objects layer by layer under computer control from 3D models. 3D printing is one ... anatomical models for surgery planning, and design and construction ... production of implants, particularly to replace bony structures, is ... Manufactured organs are, however, an elusive goal.

  4. Application of Natural Mineral Additives in Construction

    Science.gov (United States)

    Linek, Malgorzata; Nita, Piotr; Wolka, Paweł; Zebrowski, Wojciech

    2017-12-01

    The article concerns the idea of using selected mineral additives in the pavement quality concrete composition. The basis of the research paper was the modification of cement concrete intended for airfield pavements. The application of the additives: metakaolonite and natural zeolite was suggested. Analyses included the assessment of basic physical properties of modifiers. Screening analysis, assessment of micro structure and chemical microanalysis were conducted in case of these materials. The influence of the applied additives on the change of concrete mix parameters was also presented. The impact of zeolite and metakaolinite on the mix density, oxygen content and consistency class was analysed. The influence of modifiers on physical and mechanical changes of the hardened cement concrete was discussed (concrete density, compressive strength and bending strength during fracturing) in diversified research periods. The impact of the applied additives on the changes of internal structure of cement concrete was discussed. Observation of concrete micro structure was conducted using the scanning electron microscope. According to the obtained lab test results, parameters of the applied modifiers and their influence on changes of internal structure of cement concrete are reflected in the increase of mechanical properties of pavement quality concrete. The increase of compressive and bending strength in case of all analysed research periods was proved.

  5. 76 FR 43988 - Procurement List; Additions

    Science.gov (United States)

    2011-07-22

    ... this work, based on applicable experience. Finally, the purpose of the JWOD Act and the responsibility... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be...

  6. 7 CFR 1735.18 - Additional equity.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE GENERAL POLICIES, TYPES OF LOANS, LOAN REQUIREMENTS-TELECOMMUNICATIONS PROGRAM Loan Purposes and Basic Policies § 1735.18 Additional equity. If determined by the Administrator to be necessary for loan security, a borrower applying for an initial loan shall increase its net worth as a percentage of assets to...

  7. Sintering of magnesia: effect of additives

    Indian Academy of Sciences (India)

    Effect of different additives, namely Cr2O3, Fe2O3 and TiO2, up to 2 wt% was studied on the sinter- ing and .... mental distribution of the components is shown in figure 7. It shows ... Chiang Y M, Birniand D and Kingery W 1996 Physical ceram-.

  8. 77 FR 34026 - Procurement List; Proposed Additions

    Science.gov (United States)

    2012-06-08

    ... provide interested persons an opportunity to submit comments on the proposed actions. Additions If the..., Department of Homeland Security (DHS), Immigration and Customs Enforcement (ICE), Office of Chief Counsel... Institute, Inc., San Antonio, TX. Contracting Activity: Department of Homeland Security, U.S. Immigration...

  9. (ajst) additive main effects and multiplicative

    African Journals Online (AJOL)

    2013-08-02

    Aug 2, 2013 ... genotypes assessed by biplot analysis showed that the most stable ... biplot is a useful tool for the analysis of multi-environment trial (MET) data. ... multiplicative components, extracting first the additive ... The AMMI analysis of variance of cassava harvest index of the 8 .... wheat mega-environments in Iran.

  10. Stability issues in reconstitution by weapon addition

    Energy Technology Data Exchange (ETDEWEB)

    Canavan, G.H.

    1997-08-01

    Reconstitution of strategic forces by the unilateral uploading of additional weapons from initially symmetric modest force levels reduces first strike stability. These changes are quantified and traced to changes in first and second strike costs in a model of missile exchanges in which both strikes are optimized analytically.

  11. 76 FR 26279 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-05-06

    ...-service area; clean and sanitize food service equipment, utensil cleaning, and dishwashing; clean pots... additions to the Procurement List. SUMMARY: The Committee is proposing to add services to the Procurement... in this notice will be required to procure the services listed below from nonprofit agencies...

  12. 77 FR 60969 - Procurement List; Additions

    Science.gov (United States)

    2012-10-05

    ... Are Blind or Severely Disabled published a notice for additions to the Procurement List with the... Committee for Purchase From People Who Are Blind or Severely Disabled published notices of proposed..., Phoenix, AZ. Service Type/Location: Custodial and Grounds Maintenance Services, Austin Courthouse, 501...

  13. 27 CFR 5.33 - Additional requirements.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Additional requirements. 5.33 Section 5.33 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Labeling Requirements for...

  14. 76 FR 41687 - Food Additives Permitted for Direct Addition to Food for Human Consumption; Hydroxypropyl Cellulose

    Science.gov (United States)

    2011-07-15

    ... Organization and the World Health Organization (FAO/WHO) Expert Committee for Food Additives (JECFA) has... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 172 [Docket No. FDA-2010-F-0103] Food Additives Permitted for Direct Addition to Food for Human Consumption...

  15. Additional Samples: Where They Should Be Located

    International Nuclear Information System (INIS)

    Pilger, G. G.; Costa, J. F. C. L.; Koppe, J. C.

    2001-01-01

    Information for mine planning requires to be close spaced, if compared to the grid used for exploration and resource assessment. The additional samples collected during quasimining usually are located in the same pattern of the original diamond drillholes net but closer spaced. This procedure is not the best in mathematical sense for selecting a location. The impact of an additional information to reduce the uncertainty about the parameter been modeled is not the same everywhere within the deposit. Some locations are more sensitive in reducing the local and global uncertainty than others. This study introduces a methodology to select additional sample locations based on stochastic simulation. The procedure takes into account data variability and their spatial location. Multiple equally probable models representing a geological attribute are generated via geostatistical simulation. These models share basically the same histogram and the same variogram obtained from the original data set. At each block belonging to the model a value is obtained from the n simulations and their combination allows one to access local variability. Variability is measured using an uncertainty index proposed. This index was used to map zones of high variability. A value extracted from a given simulation is added to the original data set from a zone identified as erratic in the previous maps. The process of adding samples and simulation is repeated and the benefit of the additional sample is evaluated. The benefit in terms of uncertainty reduction is measure locally and globally. The procedure showed to be robust and theoretically sound, mapping zones where the additional information is most beneficial. A case study in a coal mine using coal seam thickness illustrates the method

  16. A Comprehensive Review of Effect of Biodiesel Additives on Properties, Performance, and Emission

    Science.gov (United States)

    Madiwale, S.; Karthikeyan, A.; Bhojwani, V.

    2017-05-01

    Objectives:- To presents the literature review on effect of biodiesel additives on properties, performance and on emission. Method:-In the current paper reviews are taken from previous years paper which necessitates the need of addition of additives in the blends of biodiesel and studied the its effect on properties, performance and emissions. Emissions from the diesel powered vehicles mostly damaged the earth’s environment and also increased the overall earth’s temperature. This attracts the need of alternative fuels in the field of transportation sector. Past inventions and research showed that Biodiesel can be used as an alternative fuel for the diesel engine. Biodiesel have good combustion characteristics because of their long chain hydrocarbon structure. However biodiesel possesses few disadvantages such as lower heating value, higher flow ability, much high density and not able to flow at low temperature. Higher rate of fuel consumption is identified and higher level of NOx emissions when biodiesel used in an engine as an alternative fuels. Findings:-Different additives such as antioxidants, improvers for cetane number, cold flow properties improver, etc were investigated by the many researcher and scientists and added in the different feedstock of biodiesel or blends of biodiesel with diesel in different proportions. Directly or indirectly fuel additives can improve the reduction in the emissions, improve the fuel economy, and reduce the dependency of the one’s nation on other. Performances of biodiesel vehicles were drastically improved because of additioninthe blends of biodiesel with diesel fuel in specific percentages to meet the international emission standards. Addition of additives in the biodiesel or in the blends of biodiesel basically changes the high temperature and low temperature flow properties of blends of biodiesel. Current paper finds and compares properties of different additives and its effect on blends of biodiesel properties

  17. Additive to regulate the perovskite crystal film growth in planar heterojunction solar cells

    International Nuclear Information System (INIS)

    Song, Xin; Sun, Po; Chen, Zhi-Kuan; Wang, Weiwei; Ma, Wanli

    2015-01-01

    We reported a planar heterojunction perovskite solar cell fabricated from MAPbI 3−x Cl x perovskite precursor solution containing 1-chloronaphthalene (CN) additive. The MAPbI 3−x Cl x perovskite films have been characterized by UV-vis, SEM, XRD, and steady-state photoluminescence (PL). UV-vis absorption spectra measurement shows that the absorbance of the film with CN additive is significantly higher than the pristine film and the absorption peak is red shift by 30 nm, indicating the perovskite film with additive possessing better crystal structures. In-situ XRD study of the perovskite films with additive demonstrated intense diffraction peaks from MAPbI 3−x Cl x perovskite crystal planes of (110), (220), and (330). SEM images of the films with additive indicated the films were more smooth and homogenous with fewer pin-holes and voids and better surface coverage than the pristine films. These results implied that the additive CN is beneficial to regulate the crystallization transformation kinetics of perovskite to form high quality crystal films. The steady-state PL measurement suggested that the films with additive contained less charge traps and defects. The planar heterojunction perovskite solar cells fabricated from perovskite precursor solution containing CN additive demonstrated 30% enhancement in performance compared to the devices with pristine films. The improvement in device efficiency is mainly attributed to the good crystal structures, more homogenous film morphology, and also fewer trap centers and defects in the films with the additive

  18. The water extract of Liuwei dihuang possesses multi-protective properties on neurons and muscle tissue against deficiency of survival motor neuron protein.

    Science.gov (United States)

    Tseng, Yu-Ting; Jong, Yuh-Jyh; Liang, Wei-Fang; Chang, Fang-Rong; Lo, Yi-Ching

    2017-10-15

    Deficiency of survival motor neuron (SMN) protein, which is encoded by the SMN1 and SMN2 genes, induces widespread splicing defects mainly in spinal motor neurons, and leads to spinal muscular atrophy (SMA). Currently, there is no effective treatment for SMA. Liuwei dihuang (LWDH), a traditional Chinese herbal formula, possesses multiple therapeutic benefits against various diseases via modulation of the nervous, immune and endocrine systems. Previously, we demonstrated water extract of LWDH (LWDH-WE) protects dopaminergic neurons and improves motor activity in models of Parkinson's disease. This study aimed to investigate the potential protection of LWDH-WE on SMN deficiency-induced neurodegeneration and muscle weakness. The effects of LWDH-WE on SMN deficiency-induced neurotoxicity and muscle atrophy were examined by using SMN-deficient NSC34 motor neuron-like cells and SMA-like mice, respectively. Inducible SMN-knockdown NSC34 motor neuron-like cells were used to mimic SMN-deficient condition. Doxycycline (1 µg/ml) was used to induce SMN deficiency in stable NSC34 cell line carrying SMN-specific shRNA. SMAΔ7 mice were used as a severe type of SMA mouse model. Cell viability was measured by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) and lactate dehydrogenase (LDH) assays. Apoptotic cells and neurite length were observed by inverted microscope. Protein expressions were examined by western blots. Muscle strength of animals was evaluated by hind-limb suspension test. LWDH-WE significantly increased SMN protein level, mitochondrial membrane potential and cell viability of SMN-deficient NSC34 cells. LWDH-WE attenuated SMN deficiency-induced down-regulation of B-cell lymphoma-2 (Bcl-2) and up-regulation of cytosolic cytochrome c and cleaved caspase-3. Moreover, LWDH-WE prevented SMN deficiency-induced inhibition of neurite outgrowth and activation of Ras homolog gene family, member A (RhoA)/ Rho-associated protein kinase (ROCK2)/ phospho

  19. Household possession, use and non-use of treated or untreated mosquito nets in two ecologically diverse regions of Nigeria – Niger Delta and Sahel Savannah

    Directory of Open Access Journals (Sweden)

    Otsemobor Peju

    2009-02-01

    Full Text Available Abstract Background Current use of treated mosquito nets for the prevention of malaria falls short of what is expected in sub-Saharan Africa (SSA, though research within the continent has indicated that the use of these commodities can reduce malaria morbidity by 50% and malaria mortality by 20%. Governments in sub-Sahara Africa are investing substantially in scaling-up treated mosquito net coverage for impact. However, certain significant factors still prevent the use of the treated mosquito nets, even among those who possess them. This survey examines household ownership as well as use and non-use of treated mosquito nets in Sahel Savannah and Niger Delta regions of Nigeria. Methodology This survey employed cross-sectional survey to collect data from households on coverage and use of mosquito nets, whether treated or not. Fever episodes in previous two weeks among children under the age of five were also recorded. The study took place in August 1 – 14 2007, just five months after the March distribution of treated mosquito nets, coinciding with the second raining period of the year and a time of high malaria transmission during the wet season. EPI INFO version 2003 was used in data analysis. Results The survey covered 439 households with 2,521 persons including 739 under-fives, 585 women in reproductive age and 78 pregnant women in Niger Delta Region and Sahel Savannah Region. Of the 439 HHs, 232 had any mosquito nets. Significantly higher proportion of households in the Niger Delta Region had any treated or untreated mosquito nets than those in the Sahel Savannah Region. In the Niger Delta Region, the proportion of under-fives that had slept under treated nets the night before the survey exceeded those that slept under treated nets in the Sahel Savannah Region. Children under the age of five years in the Niger Delta Region were four times more likely to sleep under treated nets than those in the Sahel Savannah Region. Conclusion This study

  20. Machinability of structural steels with calcium addition

    International Nuclear Information System (INIS)

    Pytel, S.; Zadecki, M.

    2003-01-01

    The machinability of the plain carbon and low alloy structural steels with carbon content of 0.1-0.6% is briefly discussed in the first part of the paper. In the experimental part a dependence between the addition of calcium and some changes in sulphide and oxide inclusions morphology is presented. The Volvo test for measurement of machinability index B i has been applied. Using the multiple regression methods two relationships between machinability index B i and stereological parameters of non-metallic inclusions as well as hardness of the steels have been calculated. The authors have reached the conclusion that owing to the changes in inclusion chemical composition and geometry as result of calcium addition the machinability index of the steel can be higher. (author)

  1. [Total analysis of organic rubber additives].

    Science.gov (United States)

    He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

    2010-03-01

    In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

  2. Microbial biosurfactants as additives for food industries.

    Science.gov (United States)

    Campos, Jenyffer Medeiros; Stamford, Tânia Lúcia Montenegro; Sarubbo, Leonie Asfora; de Luna, Juliana Moura; Rufino, Raquel Diniz; Banat, Ibrahim M

    2013-01-01

    Microbial biosurfactants with high ability to reduce surface and interfacial surface tension and conferring important properties such as emulsification, detergency, solubilization, lubrication and phase dispersion have a wide range of potential applications in many industries. Significant interest in these compounds has been demonstrated by environmental, bioremediation, oil, petroleum, food, beverage, cosmetic and pharmaceutical industries attracted by their low toxicity, biodegradability and sustainable production technologies. Despite having significant potentials associated with emulsion formation, stabilization, antiadhesive and antimicrobial activities, significantly less output and applications have been reported in food industry. This has been exacerbated by uneconomical or uncompetitive costing issues for their production when compared to plant or chemical counterparts. In this review, biosurfactants properties, present uses and potential future applications as food additives acting as thickening, emulsifying, dispersing or stabilising agents in addition to the use of sustainable economic processes utilising agro-industrial wastes as alternative substrates for their production are discussed. © 2013 American Institute of Chemical Engineers.

  3. The teratology testing of food additives.

    Science.gov (United States)

    Barrow, Paul C; Spézia, François

    2013-01-01

    The developmental and reproductive toxicity testing (including teratogenicity) of new foods and food additives is performed worldwide according to the guidelines given in the FDA Redbook. These studies are not required for substances that are generally recognized as safe, according to the FDA inventory. The anticipated cumulated human exposure level above which developmental or reproduction studies are required depends on the structure-alert category. For food additives of concern, both developmental (prenatal) and reproduction (multigeneration) studies are required. The developmental studies are performed in two species, usually the rat and the rabbit. The reproduction study is generally performed in the rat. The two rat studies are preferably combined into a single experimental design, if possible. The test methods described in the FDA Redbook are similar to those specified by the OECD for the reproductive toxicity testing of chemicals.

  4. [Trends in the utilization of food additives].

    Science.gov (United States)

    Szűcs, Viktória; Bánáti, Diána

    2013-11-17

    The frequent media reports on food additives weakened consumers' trust in food producers and food control authorities as well. Furthermore, consumers' uncertainty is also raised by the fact that they obtain their information from inadequate, mistrustful sources and, therefore, consumers might avoid the consumption of certain foodstuffs. While food producers may react by replacing artificial components by natural ones, they try to emphasize the favourable characteristics of their products. The authors describe the main trends and efforts related to food additives. On the basis of the overview it can be concluded that - besides taking into consideration consumers' needs - product development and research directions are promising. Food producers' efforts may help to restore consumer confidence and trust and they may help them to have informed choice.

  5. Utilization of curve offsets in additive manufacturing

    Science.gov (United States)

    Haseltalab, Vahid; Yaman, Ulas; Dolen, Melik

    2018-05-01

    Curve offsets are utilized in different fields of engineering and science. Additive manufacturing, which lately becomes an explicit requirement in manufacturing industry, utilizes curve offsets widely. One of the necessities of offsetting is for scaling which is required if there is shrinkage after the fabrication or if the surface quality of the resulting part is unacceptable. Therefore, some post-processing is indispensable. But the major application of curve offsets in additive manufacturing processes is for generating head trajectories. In a point-wise AM process, a correct tool-path in each layer can reduce lots of costs and increase the surface quality of the fabricated parts. In this study, different curve offset generation algorithms are analyzed to show their capabilities and disadvantages through some test cases and improvements on their drawbacks are suggested.

  6. Evolution of solidification texture during additive manufacturing

    Science.gov (United States)

    Wei, H. L.; Mazumder, J.; DebRoy, T.

    2015-01-01

    Striking differences in the solidification textures of a nickel based alloy owing to changes in laser scanning pattern during additive manufacturing are examined based on theory and experimental data. Understanding and controlling texture are important because it affects mechanical and chemical properties. Solidification texture depends on the local heat flow directions and competitive grain growth in one of the six preferred growth directions in face centered cubic alloys. Therefore, the heat flow directions are examined for various laser beam scanning patterns based on numerical modeling of heat transfer and fluid flow in three dimensions. Here we show that numerical modeling can not only provide a deeper understanding of the solidification growth patterns during the additive manufacturing, it also serves as a basis for customizing solidification textures which are important for properties and performance of components. PMID:26553246

  7. Additional gleaning of fusion energy development

    International Nuclear Information System (INIS)

    Yamamoto, Kenzo; Koizumi, Koichi

    2002-09-01

    This report summarizes the major topics in the history of fusion energy development in Japan from its dawn to the tokamak fusion experimental reactor, ITER. The domestic circumstances and situation in foreign countries in those days, and the details of each decision and discussion, are described. Since my previous writing, 'Forty years for Nuclear Fusion Energy Development - Big Science in Japan (1997, ERC Press. Co. Ltd.)', was a book which briefly summarize a large quantity of documents on the history, there are many points, which require additional detail explanation. This time, I selected and extracted major topics in the fusion research history, and added additional descriptions and my comments so as to supplement my previous writing. (author)

  8. Additive manufacturing technology in reconstructive surgery.

    Science.gov (United States)

    Fuller, Scott C; Moore, Michael G

    2016-10-01

    Technological advances have been part and parcel of modern reconstructive surgery, in that practitioners of this discipline are continually looking for innovative ways to perfect their craft and improve patient outcomes. We are currently in a technological climate wherein advances in computers, imaging, and science have coalesced with resulting innovative breakthroughs that are not merely limited to improved outcomes and enhanced patient care, but may provide novel approaches to training the next generation of reconstructive surgeons. New developments in software and modeling platforms, imaging modalities, tissue engineering, additive manufacturing, and customization of implants are poised to revolutionize the field of reconstructive surgery. The interface between technological advances and reconstructive surgery continues to expand. Additive manufacturing techniques continue to evolve in an effort to improve patient outcomes, decrease operative time, and serve as instructional tools for the training of reconstructive surgeons.

  9. Additive manufacturing of polymer-derived ceramics

    Science.gov (United States)

    Eckel, Zak C.; Zhou, Chaoyin; Martin, John H.; Jacobsen, Alan J.; Carter, William B.; Schaedler, Tobias A.

    2016-01-01

    The extremely high melting point of many ceramics adds challenges to additive manufacturing as compared with metals and polymers. Because ceramics cannot be cast or machined easily, three-dimensional (3D) printing enables a big leap in geometrical flexibility. We report preceramic monomers that are cured with ultraviolet light in a stereolithography 3D printer or through a patterned mask, forming 3D polymer structures that can have complex shape and cellular architecture. These polymer structures can be pyrolyzed to a ceramic with uniform shrinkage and virtually no porosity. Silicon oxycarbide microlattice and honeycomb cellular materials fabricated with this approach exhibit higher strength than ceramic foams of similar density. Additive manufacturing of such materials is of interest for propulsion components, thermal protection systems, porous burners, microelectromechanical systems, and electronic device packaging.

  10. Effects of additives on PVG dosifilm

    Energy Technology Data Exchange (ETDEWEB)

    Wenxiu, Chen; Liu, Aiguo [Beijing Normal Univ., BJ (China). Dept. of Chemistry

    1995-03-01

    Dosifilm PVG is a new radiochromic film dosimeter composed of matrix material polyvinyl butyral (PVB), leuco malachite green (LMG) and additive halogenated organic compound (RX), etc. The control of the dose range on PVG dosifilm was examined. The addition of halogenated compounds played an important role in the radiation reaction of LMG beyond the concentration of LMG. Bromide is more effective than chloride in this system, the oxidative species are X {center_dot} and X{sub 2} {center_dot} {sup -}. PVB with N-bromosuccinimide (NBS) can induce the oxidation of LMG before irradiation. The reaction mechanism of PVG was discussed. Different linear ranges of radiation response on PVG dosifilm could be controlled by alternating the relative concentrations of halogenated compounds and LMG. (author).

  11. Laser-Based Additive Manufacturing of Zirconium

    Directory of Open Access Journals (Sweden)

    Himanshu Sahasrabudhe

    2018-03-01

    Full Text Available Additive manufacturing of zirconium is attempted using commercial Laser Engineered Net Shaping (LENSTM technique. A LENSTM-based approach towards processing coatings and bulk parts of zirconium, a reactive metal, aims to minimize the inconvenience of traditional metallurgical practices of handling and processing zirconium-based parts that are particularly suited to small volumes and one-of-a-kind parts. This is a single-step manufacturing approach for obtaining near net shape fabrication of components. In the current research, Zr metal powder was processed in the form of coating on Ti6Al4V alloy substrate. Scanning electron microscopy (SEM and energy dispersive spectroscopy (EDS as well as phase analysis via X-ray diffraction (XRD were studied on these coatings. In addition to coatings, bulk parts were also fabricated using LENS™ from Zr metal powders, and measured part accuracy.

  12. Additive derivations on algebras of measurable operators

    International Nuclear Information System (INIS)

    Ayupov, Sh.A.; Kudaybergenov, K.K.

    2009-08-01

    Given a von Neumann algebra M we introduce the so-called central extension mix(M) of M. We show that mix(M) is a *-subalgebra in the algebra LS(M) of all locally measurable operators with respect to M, and this algebra coincides with LS(M) if and only if M does not admit type II direct summands. We prove that if M is a properly infinite von Neumann algebra then every additive derivation on the algebra mix(M) is inner. This implies that on the algebra LS(M), where M is a type I ∞ or a type III von Neumann algebra, all additive derivations are inner derivations. (author)

  13. Effects of additives on PVG dosifilm

    International Nuclear Information System (INIS)

    Chen Wenxiu; Liu, Aiguo

    1995-01-01

    Dosifilm PVG is a new radiochromic film dosimeter composed of matrix material polyvinyl butyral (PVB), leuco malachite green (LMG) and additive halogenated organic compound (RX), etc. The control of the dose range on PVG dosifilm was examined. The addition of halogenated compounds played an important role in the radiation reaction of LMG beyond the concentration of LMG. Bromide is more effective than chloride in this system, the oxidative species are X · and X 2 · - . PVB with N-bromosuccinimide (NBS) can induce the oxidation of LMG before irradiation. The reaction mechanism of PVG was discussed. Different linear ranges of radiation response on PVG dosifilm could be controlled by alternating the relative concentrations of halogenated compounds and LMG. (author)

  14. The addition of disilanes to cumulenes

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yiyuan [Iowa State Univ., Ames, IA (United States)

    1997-10-08

    The syntheses of silicon-containing compounds and the studies of their rearrangements have been active research areas in the Barton research group. Previously, the addition of disilanes to acetylenes was studied in the group and an intramolecular 2S + 2A mechanism has been proposed. In this thesis, the work is focused on the addition of disilanes to cumulenes. The syntheses of the precursors are discussed and the possible mechanisms for their thermal, photochemical and catalytic rearrangements are proposed. Conjugated organic polymers have been studied in the group since 1985 because of their potential for exhibiting high electroconductivity, photoconductivity, strong non-linear optical response and intense fluorescence. In the second section of this dissertation, the synthesis and property studies of poly(phenylene vinylene) analogues are discussed.

  15. Electrolyte Additives for Phosphoric Acid Fuel Cells

    DEFF Research Database (Denmark)

    Gang, Xiao; Hjuler, H.A.; Olsen, C.A.

    1993-01-01

    , as a fuel-cell performance with the modified electrolytes. Specific conductivity measurements of some of the modified phosphoric acid electrolytes are reported. At a given temperature, the conductivity of the C4F9SO3K-modified electrolyte decreases with an increasing amount of the additive; the conductivity...... of the remains at the same value as the conductivity of the pure phosphoric acid. At a given composition, the conductivity of any modified electrolyte increases with temperature. We conclude that the improved cell performance for modified electrolytes is not due to any increase in conductivity.......Electrochemical characteristics of a series of modified phosphoric acid electrolytes containing fluorinated car on compounds and silicone fluids as additives are presented. When used in phosphoric acid fuel cells, the modified electrolytes improve the performance due to the enhanced oxygen...

  16. Femtosecond laser additive manufacturing of YSZ

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jian; Bai, Shuang [PolarOnyx, Inc., San Jose, CA (United States)

    2017-04-15

    Laser additive manufacturing (LAM) of Yttria-Stabilized Zirconia (YSZ) is investigated using femtosecond (fs) fiber lasers. Various processing conditions are studied, which leads to desired characteristics in terms of morphology, porosity, hardness, microstructural and mechanical properties of the processed components. High-density (>99%) YSZ part with refined grain and increased hardness was obtained. Microstructure features of fabricated specimens were studied with SEM, EDX, the measured micro hardness is achieved as high as 18.84 GPa. (orig.)

  17. Selection of Additive Manufacturing (AM) Equipment

    Science.gov (United States)

    2017-04-01

    FOLLOW THE PROCEDURES IN DoD 5200.22-M, INDUSTRIAL SECURITY MANUAL, SECTION II-19 OR DoD 5200.1-R, INFORMATION SECURITY PROGRAM REGULATION...axis subtractive machining center. The hybrid approach is gaining interest in the traditionally subtractive machine tool industry as the additive...systems typically consists of a build vat, feedstock hoppers , a material spreading device, and an energy source. The material spreading device

  18. Addition of malodorants to lighter gas

    DEFF Research Database (Denmark)

    Neela, Vasu; von Solms, Nicolas

    2014-01-01

    Relevant thermodynamic and phase behavior of mixtures created by adding malodorants to lighter gas to discourage its abuse have been studied. The influence of physical factors such as temperature, pressure and concentration of the selected substances with lighter gas is studied. This work represe......-Plus-Association (CPA) - an equation of state - to model the fluid phase and solubility behavior of the mixtures formed by the various additives with butane....

  19. Object attributes combine additively in visual search

    OpenAIRE

    Pramod, R. T.; Arun, S. P.

    2016-01-01

    We perceive objects as containing a variety of attributes: local features, relations between features, internal details, and global properties. But we know little about how they combine. Here, we report a remarkably simple additive rule that governs how these diverse object attributes combine in vision. The perceived dissimilarity between two objects was accurately explained as a sum of (a) spatially tuned local contour-matching processes modulated by part decomposition; (b) differences in in...

  20. Additive Manufacturing for Affordable Rocket Engines

    Science.gov (United States)

    West, Brian; Robertson, Elizabeth; Osborne, Robin; Calvert, Marty

    2016-01-01

    Additive manufacturing (also known as 3D printing) technology has the potential to drastically reduce costs and lead times associated with the development of complex liquid rocket engine systems. NASA is using 3D printing to manufacture rocket engine components including augmented spark igniters, injectors, turbopumps, and valves. NASA is advancing the process to certify these components for flight. Success Story: MSFC has been developing rocket 3D-printing technology using the Selective Laser Melting (SLM) process. Over the last several years, NASA has built and tested several injectors and combustion chambers. Recently, MSFC has 3D printed an augmented spark igniter for potential use the RS-25 engines that will be used on the Space Launch System. The new design is expected to reduce the cost of the igniter by a factor of four. MSFC has also 3D printed and tested a liquid hydrogen turbopump for potential use on an Upper Stage Engine. Additive manufacturing of the turbopump resulted in a 45% part count reduction. To understanding how the 3D printed parts perform and to certify them for flight, MSFC built a breadboard liquid rocket engine using additive manufactured components including injectors, turbomachinery, and valves. The liquid rocket engine was tested seven times in 2016 using liquid oxygen and liquid hydrogen. In addition to exposing the hardware to harsh environments, engineers learned to design for the new manufacturing technique, taking advantage of its capabilities and gaining awareness of its limitations. Benefit: The 3D-printing technology promises reduced cost and schedule for rocket engines. Cost is a function of complexity, and the most complicated features provide the largest opportunities for cost reductions. This is especially true where brazes or welds can be eliminated. The drastic reduction in part count achievable with 3D printing creates a waterfall effect that reduces the number of processes and drawings, decreases the amount of touch