WorldWideScience

Sample records for polish minister irks

  1. Polish and German Press Reports on Cooperation between the Foreign Ministers of Both Countries in Resolving the Conflict in Ukraine (February–June 2014

    Directory of Open Access Journals (Sweden)

    Patecka-Frauenfelder Anna

    2016-12-01

    Full Text Available Polish-German relations in the first half of 2014 were dominated by the Ukraine crisis. This study is an attempt to answer the question of how Polish and German press assessed the cooperation of both countries in resolving the conflict in Ukraine; to what extent the most widely read magazines associated themselves with the decisions of their politicians and the feelings of their own societies and how much understanding they showed for the arguments of their EU partner. The analysis focuses on the unprecedented mission of the Weimar Triangle foreign ministers to Ukraine in February 2014, which led to an agreement between the Ukrainian opposition and President Viktor Yanukovych. A turning point was the visit paid by Radoslaw Sikorski and Frank-Walter Steinmeier to St. Petersburg in June 2014. The next meetings agreed on by EU partners were held without inviting the Polish partner. In view of the speed of events in the selected time interval, the articles subjected to analysis were taken from the most widely read online editions of national daily newspapers in Poland and Germany.

  2. Three European ministers visit CERN

    CERN Multimedia

    2007-01-01

    There have been three ministerial visits to CERN this month. Gediminas Kirkilas, Prime Minister of Lithuania, and Robert Aymar, CERN’s Director-General.On 2 July, the Prime Minister of Lithuania, Gediminas Kirkilas, was welcomed by CERN’s Director-General, Robert Aymar, before being taken on a visit of the ATLAS cavern at Point 2 and the LHC tunnel. Michal Sewerynski, Poland’s Minister for Science and Higher Education, and Robert Aymar, CERN’s Director-General.Ten days later, Poland’s Minister for Science and Higher Education, Michal Sewerynski, visited the CMS cavern and assembly hall and the LHC tunnel. He was also given a tour of the LHC Computer Centre and the CERN Control Centre. His visit was rounded off with a presentation of Polish companies involved in CERN’s activities, followed by a meeting with Polish personnel working at CERN. J�...

  3. The Minister Council decree about conditions for to bring into the Polish customs area, to take away from the Polish customs area, and to transit through this area nuclear materials, radioactive sources and device including such sources

    International Nuclear Information System (INIS)

    Miller, L.

    2002-01-01

    The decree refers to conditions for to bring into the Polish customs area, to take away from the Polish customs area, and to transit through this area nuclear materials, radioactive sources and devices containing such sources

  4. Polish visit

    CERN Document Server

    2003-01-01

    On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

  5. Characterization of the chicken inward rectifier K+ channel IRK1/Kir2.1 gene

    Directory of Open Access Journals (Sweden)

    Locke Emily

    2004-11-01

    Full Text Available Abstract Background Inward rectifier potassium channels (IRK contribute to the normal function of skeletal and cardiac muscle cells. The chick inward rectifier K+ channel cIRK1/Kir2.1 is expressed in skeletal muscle, heart, brain, but not in liver; a distribution similar but not identical to that of mouse Kir2.1. We set out to explore regulatory domains of the cIRK1 promoter that enhance or inhibit expression of the gene in different cell types. Results We cloned and characterized the 5'-flanking region of cIRK1. cIRK1 contains two exons with splice sites in the 5'-untranslated region, a structure similar to mouse and human orthologs. cIRK1 has multiple transcription initiation sites, a feature also seen in mouse. However, while the chicken and mouse promoter regions share many regulatory motifs, cIRK1 possesses a GC-richer promoter and a putative TATA box, which appears to positively regulate gene expression. We report here the identification of several candidate cell/tissue specific cIRK1 regulatory domains by comparing promoter activities in expressing (Qm7 and non-expressing (DF1 cells using in vitro transcription assays. Conclusion While multiple transcription initiation sites and the combinatorial function of several domains in activating cIRK1 expression are similar to those seen in mKir2.1, the cIRK1 promoter differs by the presence of a putative TATA box. In addition, several domains that regulate the gene's expression differentially in muscle (Qm7 and fibroblast cells (DF1 were identified. These results provide fundamental data to analyze cIRK1 transcriptional mechanisms. The control elements identified here may provide clues to the tissue-specific expression of this K+ channel.

  6. Visit by two Ministers

    CERN Multimedia

    2008-01-01

    Last December CERN received visits from two Ministers. Bulgaria’s Deputy Prime Minister and Minister of Science and Education, Daniel Vylchev, visited the CMS experiment in the company of the CMS Spokesman, T. Virdee, and several Bulgarian physicists. From left to right: J. Stamenov, M. Mateev, S. Stavrev, T. Virdee, V. Genchev, the Minister Daniel Vylchev, A. Hristova Vutsova, L. Litov and G. Soultanov. CERN Director-General, Robert Aymar, and Montenegro’s Minister of Education and Science, Slobodan Backović. On 18 December, Robert Aymar welcomed Bulgaria’s Deputy Prime Minister and Minister of Science and Education, Daniel Vylchev. A particular highlight of his visit was a tour of the CMS site, during which he met the many Bulgarian physicists working on the experiment. He also attended a presentation of the LHC Computing Grid and visited the Computer Centre. Bulgaria has been a CERN ...

  7. Steered Molecular Dynamics for Investigating the Interactions Between Insulin Receptor Tyrosine Kinase (IRK) and Variants of Protein Tyrosine Phosphatase 1B (PTP1B).

    Science.gov (United States)

    Nguyen, Hung; Do, Nhat; Phan, Tuyn; Pham, Tri

    2018-02-01

    The aim of this study is to use steered molecular dynamics to investigate the dissociation process between IRK and PTP1Bs for wild type and five mutants (consisting of p.D181E, p.D181A, p.Q262A, p.D181A-Y46F, and p.D181A-Q262A). The gained results are observed not only the unbinding mechanism of IRK-PTP1B complexes came from pulling force profile, number of hydrogen bonds, and interaction energy between IRK and PTP1Bs but also described PTP1B's point mutations could variably change its binding affinity towards IRK. Additionally, the binding free energy calculated by Molecular Mechanics/Poisson-Boltzmann Surface Area (MM-PBSA) is also revealed that electrostatic energy and polar solvation energy mainly made up the binding free energy of PTP1B-IRK complexes.

  8. Italy's Prime Minister visits CERN

    CERN Multimedia

    Stefania Pandolfi

    2015-01-01

    On Tuesday, 7 July 2015, the Prime Minister of the Italian Republic, Matteo Renzi, visited CERN. He was accompanied by a delegation that included Italy's Minister for Education, University and Research, Stefania Giannini.   From left to right: Fernando Ferroni, President of the Istituto Nazionale di Fisica Nucleare (INFN); Sergio Bertolucci, CERN Director for Research and Scientific Computing; Stefania Giannini, Italy's Minister of Education, University and Research; Matteo Renzi, Prime Minister of the Italian Republic; Fabiola Gianotti, CERN Director-General Designate; Rolf Heuer, CERN Director-General.   The Prime Minister was welcomed by members of the CERN Management together with former CERN Director-General and Senator for Life of the Italian Republic, Carlo Rubbia. After a brief general introduction to CERN’s activities by Rolf Heuer, the Italian delegation visited LHC Point 1. After a tour of the ATLAS control room, they donned helmets to visit th...

  9. Russia's science minister keeps cabinet post

    CERN Multimedia

    1999-01-01

    Mikhail Kirpichnikov, minister for science and technology has kept his post in the cabinet of the new prime minister Sergei Stepashin. Yevgeniy Adamov also remains as minister of atomic energy (2 paragraphs).

  10. Swedish Government Minister at CERN

    CERN Document Server

    2008-01-01

    The Swedish Minister for Higher Education and Research recently visited CERN. The Swedish Minister was greeted by Swedish scientists working at CERN. Signing of the Swedish Computing Memorandum of Understanding. Pär Omling, Director-General of the Swedish Research Council (left), and Jos Engelen, CERN’s Chief Scientific Officer. Lars Leijonborg, the Swedish Minister for Higher Education and Research, was welcomed to CERN by Director-General Robert Aymar on 10 March. After an introduction to the Laboratory’s activities, the Minister was given guided tours of the control room, the ATLAS surface hall and experiment cavern and the adjoining LHC tunnel. Mr Leijonborg was then greeted by Swedish scientists and given an overview of the Swedish research programme at CERN. Five Swedish university groups are taking part in LHC research. Swedish universities are notably involved in the manufacture of parts for the sub-detectors of AT...

  11. French Prime Minister tours CERN

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    On 30 July, Jean-Marc Ayrault, the Prime Minister of the French Republic, and Geneviève Fioraso, the Minister of Higher Education and Research, visited the Laboratory.   After being met by the Director-General at LHC Point 5, they visited the CMS control centre and experiment cavern, and got a glimpse of the LHC tunnel at Point 5. The visit ended with a round-table discussion with French and other international members of CERN’s scientific community. During the discussion, the Prime Minister reaffirmed that “support for fundamental research has to be maintained, and France must continue to invest in education, research and innovation.” He also paid tribute to CERN's role in international cooperation, which he qualified as “a fine example of science without borders.”

  12. What does the Minister do?

    DEFF Research Database (Denmark)

    Holm Pedersen, Lene; Bhatti, Yosef; Hjelmar, Ulf

    If management matters to performance, then it is also likely to be of importance how managers spend their time. Hence, ‘what does the manager do’ has been a classical research question, which this paper applies to leaders at the ultimate top asking, what does the minister do? The research is based...

  13. What does the minister do?

    DEFF Research Database (Denmark)

    Pedersen, Lene Holm; Hjelmar, Ulf; Bhatti, Yosef

    2018-01-01

    This article contributes insight into the working conditions of political leaders based on rarely accessible high‐quality data that include unique surveys of Danish ministers, mayors, and permanent secretaries supplemented by in‐depth interviews. The results show that the classical metaphor...... conditions are likely to affect the way our democracies work....

  14. Swedish minister rebuilds scientists' trust

    CERN Multimedia

    Sylwan, P

    1999-01-01

    Thomas Ostros, Sweden's new science minister is aiming to improve links with the science community, severely strained during the tenure of Carl Tham. Significantly, he confirmed that he will not be making any further changes to the managment of the Swedish Foundation for Strategic Research. He also announced a 5 per cent increase in government funding for science which will be used to strengthen basic research and education (1 page).

  15. The IRK time-of-flight facility for measurements of double-differential neutron emission cross sections

    International Nuclear Information System (INIS)

    Pavlik, A.; Priller, A.; Steier, P.; Vonach, H.; Winkler, G.

    1994-01-01

    In order to improve the present experimental data base of energy- and angle-differential neutron emission cross sections at 14 MeV incident-neutron energy, a new time-of-flight (TOF) facility was installed at the Institut fuer Radiumforschung und Kernphysik (IRK), Vienna. The set-up was particularly designed to more precisely measure the high-energy part of the secondary neutron spectra and consists of three main components: (1) a pulsed neutron generator of Cockcroft-Walton type producing primary neutrons via the T(d,n)-reaction, (2) a tube system which can be evacuated containing the neutron flight path, the sample, collimators and the sample positioning system, and (3) the neutron detectors with the data acquisition equipment. Removing the air along the neutron flight path results in a drastic suppression of background due to air-scattered neutrons in the spectrum of the secondary neutrons. For every secondary neutron detected in the main detector, the time-of-flight, the pulse-shape information and the recoil energy are recorded in list-mode via a CAMAC system connected to a PDP 11/34 on-line computer. Using a Micro VAX, the multiparameter data are sorted and reduced to double-differential cross sections

  16. An Algerian Minister visits CERN

    CERN Multimedia

    2006-01-01

    The Algerian Minister of Higher Education and Scientific Research, Rachid Haraoubia, visited CERN on 14 November. His party included the Rector of the University of Blida and the Director of the Algerian Ecole Nationale Polytechnique. Welcomed by CERN's Director-General, Robert Aymar, and Secretary-General, Maximilien Metzger, he signed the VIP Visitors' Book before going on to visit the ATLAS experiment and the LHC tunnel. He then had the opportunity to meet Algerian scientists working at CERN. Some fifteen Algerian physicists attached to European and US institutes are participating in the LHC experiments, in particular ATLAS. A formal collaboration agreement between Algeria and CERN is expected to be drawn up in the near future.

  17. Prime Minister of Pakistan visits CERN

    CERN Multimedia

    Anaïs Schaeffer

    2016-01-01

    On Saturday, 23 January 2016, CERN welcomed Mr Muhammad Nawaz Sharif, Prime Minister of Pakistan.   From left to right: Minister of Finance Mr Mohammad Ishaq Dar, Prime Minister of the Islamic Republic of Pakistan, Muhammad Nawaz Sharif, CERN Director-General Fabiola Gianotti and CMS national contact physicist Hafeez Hoorani. Mr Muhammad Nawaz Sharif arrived at Point 5 in Cessy, where he was welcomed onto French soil by the sous-préfet of Cessy, Stéphane Donnot, and, representing CERN, Director-General Fabiola Gianotti, Directors Eckhard Elsen and Charlotte Warakaulle, and Rüdiger Voss, the adviser for relations with Pakistan. It was the first visit by a head of government of Pakistan since the country became CERN's latest Associate Member State in July 2015. The Prime Minister then had the opportunity to visit the CMS underground experimental area accompanied by the CMS Spokesperson, Tiziano Camporesi, and the CMS collaboration’...

  18. Functional Median Polish

    KAUST Repository

    Sun, Ying; Genton, Marc G.

    2012-01-01

    polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

  19. Cancer morbidity among polishers.

    Science.gov (United States)

    Järvholm, B; Thiringer, G; Axelson, O

    1982-01-01

    The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

  20. Burnout and engagement of reformed church ministers

    Directory of Open Access Journals (Sweden)

    Chenelle Buys

    2010-06-01

    Research purpose: The objective of this study was to investigate the effects of job-demands and job-resources on ministers’ burnout and engagement. Congregational commitment and health were included as possible consequences of burnout and engagement. Motivation for the study: Ministers’ well-being has become an important topic for both researchers and practitioners. Research design, approach and method: A survey design with a non-probability, purposive voluntary sample of 115 ministers was used. The Job-Demands–Resources Questionnaire, Maslach Burnout Inventory, Work Engagement Scale, General Health Questionnaire, and Congregational Commitment Scale were administered. Main findings: Regression analysis indicated that the pace, amount of work and emotional demands were indicators of burnout while growth opportunities, social support and job significance were indicators of engagement. Furthermore, it was found that exhaustion predicted somatic symptoms and depression, while mental distance predicted depression. Engagement predicted social functioning and affective commitment. Practical implications: Interventions should be implemented to help ministers deal more effectively with any burnout symptoms experienced in order to prevent ministers who are already showing signs of burnout from getting sick to increase their engagement and to rehabilitate individuals who are ill as a result of the work place. Contribution: The study contributes to knowledge regarding the effects of job-demands and resources on the well-being of ministers.

  1. Bevoegdheid minister om OMG te verbieden

    NARCIS (Netherlands)

    Koornstra, J.; Roorda, B.; Vols, M.; Brouwer, J.G.

    2018-01-01

    On Tuesday the 6th of March 2018, a legislative proposal has been submitted for public consultation. The drafters propose to give the Minister for Legal Protection the power to order the ban and dissolution of legal persons that pose a threat to the public order. Drafters believe that the current

  2. Nanoparticle Delivered Human Biliverdin Reductase-Based Peptide Increases Glucose Uptake by Activating IRK/Akt/GSK3 Axis: The Peptide Is Effective in the Cell and Wild-Type and Diabetic Ob/Ob Mice

    Directory of Open Access Journals (Sweden)

    Peter E. M. Gibbs

    2016-01-01

    Full Text Available Insulin’s stimulation of glucose uptake by binding to the IRK extracellular domain is compromised in diabetes. We have recently described an unprecedented approach to stimulating glucose uptake. KYCCSRK (P2 peptide, corresponding to the C-terminal segment of hBVR, was effective in binding to and inducing conformational change in the IRK intracellular kinase domain. Although myristoylated P2, made of L-amino acids, was effective in cell culture, its use for animal studies was unsuitable. We developed a peptidase-resistant formulation of the peptide that was efficient in both mice and cell culture systems. The peptide was constructed of D-amino acids, in reverse order, and blocked at both termini. Delivery of the encapsulated peptide to HepG2 and HSKM cells was confirmed by its prolonged effect on stimulation of glucose uptake (>6 h. The peptide improved glucose clearance in both wild-type and Ob/Ob mice; it lowered blood glucose levels and suppressed glucose-stimulated insulin secretion. IRK activity was stimulated in the liver of treated mice and in cultured cells. The peptide potentiated function of IRK’s downstream effector, Akt-GSK3-(α,β axis. Thus, P2-based approach can be used for improving glucose uptake by cells. Also, it allows for screening peptides in vitro and in animal models for treatment of diabetes.

  3. Prime-Minister of Malta visits CERN

    CERN Multimedia

    2008-01-01

    The Prime-Minister of Malta, Dr Lawrence Gonzi, visited CERN and met Director-General, Robert Aymar, on 10 January. The Prime-Minister of Malta, Dr Lawrence Gonzi, and CERN Director-General, Robert Aymar, signed a cooperation agreement. Dr Gonzi was given guided tours of the CMS experiment at Point 5 in Cessy and of the LHC magnet test facility, in which his country was involved. One of the high points of the day was the signing of a cooperation agreement between CERN and the Government of the Republic of Malta, aimed at the development of scientific and technical collaboration. "I’m really enthusiastic about this agreement, which constitutes a first step towards real collaboration between the Maltese government and CERN," said Nicholas Sammut, a Maltese engineer at CERN who was present throughout the visit (on the right). See also the video.

  4. The French Research Minister visits CERN

    CERN Multimedia

    2008-01-01

    On Friday, 6 June, the French Minister for Higher Education and Research, Valérie Pécresse, was welcomed by CERN Director-General, Robert Aymar. Robert Aymar accompanies Valérie Pécresse and Bernard Accoyer on a visit to CMS. A dozen physicists took part in the round-table discussion, including the Director-General, project leaders, deputy spokesmen, members of the experiments, CERN personnel and users.At first, the Minister was given a tour of the CMS experiment and the LHC tunnel, accompanied by the President of the French National Assembly, Bernard Accoyer. The delegation then took part in a round-table discussion. The main objective of the Minister’s visit was to obtain input on the organisation of large research infrastructures, based on information concerning CERN’s administrative and scientific configuration and the experiment collaborations. As J.-J. Blaising, Head of the PH Depa...

  5. UK Minister enthusiastic after visit to CERN

    CERN Multimedia

    2008-01-01

    ON Tuesday 5 August the UK Secretary of State for Innovation, Universities and Skills, John Denham, came to CERN. The UK continues its strong links with CERN.The Minister was welcomed on arrival at CERN by Robert Aymar, the Director-General, and senior British scientists. Following a short presentation, he began a comprehensive tour of the Laboratory with a visit to both the LHC at point 5 and the CMS experiment. After lunch the Minister’s busy schedule continued, completing his overview of the main areas of UK participation at CERN. As soon as he had signed the guest book, he was whisked off to visit the LHCb experiment, the LHC computing grid project (LCG) and the ATLAS control room. However, the last item on his itinerary was perhaps the most illuminating. Meeting a diverse group of British scientists, from technical and summer students to staff members with more than 30 years of experience, the Minister had the opportunity...

  6. Health Information in Polish (polski)

    Science.gov (United States)

    ... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

  7. Polish Cartographical Review

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2017-07-01

    Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

  8. As prime minister during the Fukushima crisis

    International Nuclear Information System (INIS)

    Kan, Naoto

    2015-01-01

    Naoto Kan was the acting Japanese Prime Minister during the Tohoku earthquake and the resulting Fukushima reactor accident. After demission in September 2011 he decided to document the facts according to his knowledge and the memorized thoughts during the course of the accident, his decision making and his own emotions. The first chapter covers the daily documentation until March 19th, the second chapter deals with nuclear power phaseout and Kan's demission, the third chapter covers the issues nuclear power phaseout - politics - citizens.

  9. Visit of the Austrian Minister of Health and Women's Issues

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Mrs Maria Rauch-Kallat, Minister of Health and Women's Issues, Austria, came to CERN on 19 May. The theme of her visit was technology transfer. Photo 01: Dr Hans F. Hoffmann, CERN Director for Technology Transfer and Scientific Computing with Mrs Maria Rauch-Kallat, Minister of Health and Women's Issues, Austria, signing the VIP visitors' book. Photo 02: Mrs Maria Rauch-Kallat, Minister of Health and Women's Issues, Austria, signing the VIP visitors' book.

  10. Polish polar research (outline

    Directory of Open Access Journals (Sweden)

    Krzysztof Ludwik Birkenmajer

    2017-12-01

    Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

  11. A new strategy for the restructuring of Polish energy sector

    International Nuclear Information System (INIS)

    Kozlowski, R.H.; Tallat, J.

    2006-01-01

    In accordance with strategic planning in the military, the leader (in this case the Minister of Economy) is responsible for setting goals, finding the right people to accomplish these goals (those working in the energy sector), analysing the current situation (state of the energy sector) and evaluating available resources (conventional and renewable energy resources). In terms of economic planning (this term is proper for an economy that sets numerous laws and quotas), the goal is to get the Polish economy out of economic slump, which is the result of seventeen years of improper government practices, into a state of prosperity corresponding to no less than the European average. The only way of accomplishing this goal of high economic growth and catching up with highly-developed countries is to develop local inexpensive energy resources. This study focuses on the potential to develop abundant Polish geothermal resources as well as natural gas based co-generation. (author)

  12. Functional Median Polish

    KAUST Repository

    Sun, Ying

    2012-08-03

    This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

  13. Ministers from Belgium and the Netherlands visit CERN

    CERN Multimedia

    2005-01-01

    The Belgian Minister of Economy, Energy, Foreign Trade and Science Policy, Marc Verwilghen, with CERN's Director-General, Robert Aymar.From left to right, Frank Linde, Director of the Netherlands National Institute for Nuclear Physics and High Energy Physics (NIKHEF), Jos Engelen, CERN's Chief Scientific Officer, Maria van der Hoeven, Netherlands Minister for Education, Culture and Science, and Herman Ten Kate, Head of the ATLAS magnet project, visiting the ATLAS assembly hall. Marc Verwilghen, Belgian Minister of Economy, Energy, Foreign Trade and Science Policy, came to CERN on 8 April 2005, where he visited the CMS assembly hall and underground cavern, as well as the hall where the LHC superconducting magnets are being tested. A few days later, on 21 April, the Netherlands Minister for Education, Culture and Science, Mrs Maria van der Hoeven, was welcomed to CERN by the Director-General, Robert Aymar, and the Chief Scientific Officer, Jos Engelen. Minister van der Hoeven visited the ATLAS installations, t...

  14. Swiss and German Ministers make a joint visit to CERN

    CERN Multimedia

    2008-01-01

    On Friday, 23 May the German Federal Minister of Education and Research, Annette Schavan, and the Head of the Swiss Federal Department of Foreign Affairs, Micheline Calmy-Rey, paid a joint visit to CERN. German Federal Minister of Education and Research, Annette Schavan and the Head of the Swiss Federal Department of Foreign Affairs, Micheline Calmy-Rey, with Robert Aymar, Rolf-Dieter Heuer and Jos Engelen. The Swiss and German ministers in front of the ATLAS experiment, accompanied by Robert Aymar, Rolf-Dieter Heuer, Jos Engelen and Peter Jenni. Director-General Robert Aymar gave the ministers a short introduction to CERN, which was followed by the signing of the Guest Book. Both ministers took the opportunity to go to Point 1 to visit the ATLAS experiment, guided by the ATLAS spokesperson Peter Jenni, and also the LHC tunnel.

  15. Polish Higher Education: Intersectoral Distinctiveness

    Science.gov (United States)

    Musial, Joanna

    2014-01-01

    This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

  16. Spanish Minister of Science and Technology visits ATLAS

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, came to CERN in November. He is seen here visiting the ATLAS assembly hall. Photo 01: The Minister (left) is greeted by Peter Jenni, spokesperson for the ATLAS collaboration. In the centre is Matteo Cavalli-Sforza, Spanish scientist at CERN. Photo 02: The Minister (left) in discussion with Peter Jenni. Photo 03: Peter Jenni shows the visitors one of eight vacuum vessels being built by Spanish company Felguera Construcciones Mecanicas SA for the superconducting coils of the air-core ATLAS barrel toroid magnet system: (left to right) Matteo Cavalli-Sforza of CERN; the Minister; M. Aguilar-Benitez, Spanish delegate to CERN Council; G. Léon; and Peter Jenni.

  17. Minister Bibeau announces appointments of IDRC's President and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2018-05-04

    May 4, 2018 ... Today the Honourable Marie-Claude Bibeau, Minister of International ... Jean Lebel will strengthen the Centre's position as a global leader on research for ... Shainoor is the founder and managing director of Better Business ...

  18. Minister Pratt welcomes new Canada Research Chair at Carleton University

    CERN Multimedia

    2004-01-01

    "The Honourable David Pratt, Minister of National Defence, and Member of Parliament for Nepean-Carleton, today congratulated Carleton University on receiving $638,405 in funding to support a new Canada Research Chair" (1 page)

  19. Spanish Minister of Science and Technology visits ATLAS

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, pictured in front of a barrel toroid cryostat vessel in the ATLAS assembly hall. The air-core ATLAS barrel toroid magnet system will consist of eight large superconducting coils, each in its own vacuum vessel, built by Spanish company Felguera Construcciones Mecanicas SA under the responsibility of IFAE (Institute for High Energy Physics), Barcelona. Photo 01: The Minister in front of the cryostat vessel. Photo 02: The Minister (right) with H.E. Mr Joaquin Pérez-Villanueva y Tovar, Spanish Ambassador to the United Nations in Geneva. Photo 03: (left to right) Manuel Delfino, leader of the Information Technology division at CERN; Matteo Cavalli-Sforza of CERN; Juan Antonio Rubio, leader of the Education and Technology Transfer division at CERN; The Minister; and Peter Jenni, ATLAS spokesperson.

  20. Controversial Swedish science minister loses seat in reshuffle

    CERN Multimedia

    Sylawan, P

    1998-01-01

    Carl Tham, who introduced sweeping changes to higher education and research, has lost his seat in a cabinet reshuffle. As science minister for 4 years he redirected funding to applied science and established new regional universities (1 page).

  1. Bavarian Prime Minister to Visit la Silla

    Science.gov (United States)

    1997-03-01

    The Bavarian Prime Minister, Dr. Edmund Stoiber , is currently visiting a number of countries in South America. He is accompanied by a high-ranking delegation of representatives of Bavarian politics and industry. During this trip, the Bavarian delegation will visit the Republic of Chile, arriving in Santiago de Chile on Sunday, March 9, 1997. On the same day, Dr. Stoiber and most other members of the delegation, on the invitation of the Director General of ESO, Professor Riccardo Giacconi, will visit the ESO La Silla Observatory , located in an isolated area in the Atacama desert some 600 km north of the Chilean capital. ESO, the European Organisation for Astronomy, with Headquarters in Garching near Munich in Bavaria, welcomes this opportunity to present its high-tech research facilities to Dr. Stoiber and leaders of the Bavarian industry. During the visit, the delegation will learn about the various front-line research projects, now being carried out by astronomers from Germany and other ESO member countries with the large telescopes at La Silla. There will also be a presentation of the ESO VLT project , which will become the world's largest optical astronomical telescope, when it is ready a few years from now. The delegation will be met by the Director of the La Silla Observatory, Dr. Jorge Melnick and his scientific-technical staff which includes several members of German nationality. Also present will be ESO's Head of Administration, Dr. Norbert König (Garching) and the General Manager of ESO in Chile, Mr. Daniel Hofstadt. More information about this visit and the ESO facilities is available from the ESO Education and Public Relations Department (Tel.: +49-89-32006-276; Fax.: +49-89-3202362; email: ips@eso.org; Web: http://www.eso.org../../../epr/ ). Diese Pressemitteilung ist auch in einer Deutschen Fassung vorhanden. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../). ESO Press

  2. Polish Semantic Parser

    Directory of Open Access Journals (Sweden)

    Agnieszka Grudzinska

    2000-01-01

    Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

  3. The well-being of ministers in South Africa / Chenell Buys

    OpenAIRE

    Buys, Chenell

    2008-01-01

    The objectives of this research were to investigate ministers' job demands and job resources, to study the relationship between the different job demands and job resources that ministers experience, to investigate the effects of job demands and job resources on minister's burnout and engagement, to investigate the factors impacting on the health and congregational commitment of ministers, to analyse the effects of job demands and job resources on ministers' psychological conditions of meaning...

  4. British Minister over the moon after visit to CERN

    CERN Document Server

    2008-01-01

    The UK Minister for Science and Innovation, Ian Pearson MP, recently visited CERN. Ian Pearson, UK Minister for Science and Innovation (back row, third left), in the LHC tunnel with Peter Jenni, ATLAS Spokesperson (back row, centre), John Ellis (back row, third right), Simon Featherstone, UK Ambassador to Switzerland (back row, far left), Keith Mason, Chief Executive of STFC (the UK funding agency) (back row, second from right), and British scientists working at ATLAS.On the 15 April UK Minister for Science and Innovation, Ian Pearson, made his first trip to CERN. The UK is one of the founding Member States of CERN, and the British contingent is one of the largest of any country with around 650 British scientists and a further 250 staff members working here. After an introduction to the facilities by Director-General Robert Aymar, who expressed CERN’s gratitude for UK government support through its Science and Technology Facilitie...

  5. [Lysenkoism in Polish botany].

    Science.gov (United States)

    Köhler, Piotr

    2008-01-01

    Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

  6. Polish Americans. Second, Revised Edition.

    Science.gov (United States)

    Lopata, Helen Znaniecka

    This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

  7. Prime Minister of Japan speaks at Kurchatov Institute

    International Nuclear Information System (INIS)

    2003-01-01

    During his official visit to the Russian Federation, Mr. J. Koizumi, Prime Minister of Japan, was invited to speak on 11 January 2003 to the participants in the International Scientists Conference to commemorate the 100th birthday of Academician I.V. Kurchatov. When asked from people in the audience at the Kurchatov Institute, Prime Minister Koizumi confirmed that during his recent meeting with the President of the Russian Federation, Vladimir Putin, at the Kremlin, they have discussed the construction of a fusion installation, which is the ITER Project

  8. The Music Repertoire of the Society of Jesus in the Polish-Lithuanian Commonwealth (1565–1773

    Directory of Open Access Journals (Sweden)

    Jeż Tomasz

    2016-12-01

    Full Text Available The paper presents the research project coordinated by the University of Warsaw and financed by the Minister of Science and Higher Education as part of the “Tradition 1a” module of the National Programme for the Development of Humanities. The main task of this research project is the documentation of the Jesuit music repertory produced and disseminated on the territory of the Polish-Lithuanian Commonwealth.

  9. Despite reprimand, minister pardons police chief / Ksenia Repson

    Index Scriptorium Estoniae

    Repson, Ksenia

    2005-01-01

    Siseminister Kalle Laanet möönis, et Politseiameti peadirektor Robert Antropov ei ole oma vanemaid politseisõidukiga Saaremaale toimetades reegleid rikkunud ning jättis tema lahkumispalve rahuldamata. Siiski karistas minister politseijuhti pooleaastase lisatasu kaotuse ja puhkuse tühistamisega

  10. Aligning climate policy with finance ministers' G20 agenda

    Science.gov (United States)

    Edenhofer, Ottmar; Knopf, Brigitte; Bak, Céline; Bhattacharya, Amar

    2017-07-01

    There is no longer a choice between climate policy and no climate policy. G20 finance ministers have to play a key role in implementing smart climate policies like carbon pricing. Yet they remain reluctant to take advantage of the merits of carbon pricing for sound fiscal policy.

  11. Polishing large NaCl windows on a continuous polisher

    International Nuclear Information System (INIS)

    Williamson, R.

    1979-01-01

    The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

  12. 20 CFR 404.1023 - Ministers of churches and members of religious orders.

    Science.gov (United States)

    2010-04-01

    ... and application as is given to the term for income tax purposes under the Code. (iii) If a minister is... minister, is engaged by N University to teach history and mathematics. M does no other work for N although...

  13. Detection of paint polishing defects

    Science.gov (United States)

    Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

    2018-06-01

    Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

  14. Tooth polishing: The current status

    Directory of Open Access Journals (Sweden)

    Madhuri Alankar Sawai

    2015-01-01

    Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  15. Lysenko affair and Polish botany.

    Science.gov (United States)

    Köhler, Piotr

    2011-01-01

    This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

  16. Elastic emission polishing

    Energy Technology Data Exchange (ETDEWEB)

    Loewenthal, M.; Loseke, K.; Dow, T.A.; Scattergood, R.O.

    1988-12-01

    Elastic emission polishing, also called elastic emission machining (EEM), is a process where a stream of abrasive slurry is used to remove material from a substrate and produce damage free surfaces with controlled surface form. It is a noncontacting method utilizing a thick elasto-hydrodynamic film formed between a soft rotating ball and the workpiece to control the flow of the abrasive. An apparatus was built in the Center, which consists of a stationary spindle, a two-axis table for the workpiece, and a pump to circulate the working fluid. The process is controlled by a programmable computer numerical controller (CNC), which presently can operate the spindle speed and movement of the workpiece in one axis only. This apparatus has been used to determine material removal rates on different material samples as a function of time, utilizing zirconium oxide (ZrO{sub 2}) particles suspended in distilled water as the working fluid. By continuing a study of removal rates the process should become predictable, and thus create a new, effective, yet simple tool for ultra-precision mechanical machining of surfaces.

  17. 32 CFR 1645.2 - The claim for minister of religion classification.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false The claim for minister of religion classification. 1645.2 Section 1645.2 National Defense Other Regulations Relating to National Defense SELECTIVE SERVICE SYSTEM CLASSIFICATION OF MINISTERS OF RELIGION § 1645.2 The claim for minister of religion...

  18. 32 CFR 1630.43 - Class 4-D: Minister of religion.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Class 4-D: Minister of religion. 1630.43 Section... CLASSIFICATION RULES § 1630.43 Class 4-D: Minister of religion. In accord with part 1645 of this chapter any registrant shall be placed in Class 4-D who is a: (a) Duly ordained minister of religion; or (b) Regular...

  19. Economic Conditions affect Support for Prime Minister Parties in Scandinavia

    DEFF Research Database (Denmark)

    Larsen, Martin Vinæs

    2016-01-01

    between unemployment, economic growth and support for prime minister parties is re-examined in two datasets. The first is a dataset of Scandinavian elections, and the second is a yearly Danish vote function, which was constructed using election polls. Across both datasets, it is found that if one simply......Previous research has not been able to identify a relationship between objective economic indicators and support for governing parties in the Scandinavian countries. This is potentially problematic, as it suggests that political leaders are not held electorally accountable for the economic...... correlates support for the prime minister's party with economic conditions, there is no relationship; however, if one specifies a statistical model, which takes the Scandinavian context into account, it is possible to identify a statistically significant effect of economic conditions on electoral support...

  20. Visit of the Spanish Minister for Science and Technology

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr. Josep Piqué i Camps, Minister of Science and Technology, Spain, visited CERN in November. On his itinerary was a tour of the test facility for LHC magnets in building SM18. Photo 01: H.E. Mr Joaquin Pérez-Villanueva y Tovar, Ambassador and Permanent Representative of Spain to the United Nations Office in Geneva (right), with Juan Antonio Rubio, leader of Education and Technology Transfer division in building SM18.

  1. Visit by the Prime Minister of the Slovak Republic

    CERN Multimedia

    CERN Bulletin

    2012-01-01

    The Prime Minister of the Slovak Republic, Iveta Radicova, visited CERN on 28 February, meeting with CERN Director-General Rolf Heuer and going down to the ALICE cavern.   Upon arrival, Prime Minister Radicova spent about half an hour discussing the Slovak Republic’s involvement in CERN with the DG, and was very interested in the physics results that the Organization is currently working on. After signing the official guest book in Building 500, the Prime Minister crossed the border into France to visit the ALICE experiment. Donning a helmet, she descended into the ALICE cavern to take a first-hand look at one of the two CERN experiments to which her country has contributed (ATLAS being the second). “We also showed her the read-out chambers for the Time Projection Chamber (TPC) and the electronics for the pixel detector that are on display in the ALICE exhibition area, as they were produced in the Slovak Republic,” says Karel Safarik, the Slovakian ALICE physicist w...

  2. A fragilidade do Ministério da Defesa brasileiro

    Directory of Open Access Journals (Sweden)

    Jorge Zaverucha

    2005-11-01

    Full Text Available O presente artigo apresenta os diversos momentos por que passou o Ministério da Defesa, desde sua criação no segundo mandato presidencial de Fernando Henrique Cardoso (1999-2002 até o atual governo de Luís Inácio Lula da Silva (2003-2006, com os respectivos ministros da Defesa. Visto como uma etapa importante na reconstitucionalização do país, na medida em que prevê a submissão dos comandantes das Forças Armadas a um ministro civil, e embora alguns analistas considerem que essa submissão de fato ocorre, procuramos indicar as resistências e as insubordinações militares ao poder civil, provenientes de um legado autoritário. Na medida em que o Ministério da Defesa não consegue implementar uma política própria, em que os militares seguiriam as orientações dos civis, o artigo conclui considerando a fragilidade política e institucional do Ministro da Defesa, civil, ante o os comandos militares, que conservam alto grau de autonomia decisória em relação à estrutura do Ministério.

  3. Polish Toxic Currency Options

    Directory of Open Access Journals (Sweden)

    Waldemar Gontarski

    2009-06-01

    Full Text Available Toxic currency options are defined on the basis of the opposition to the nature (essence of an option contract, which is justified in terms of norms founded on the general law clause of characteristics (nature of a relation (which represents an independent premise for imposing restrictions on the freedom of contracts. So-understood toxic currency options are unlawful. Indeed they contravene iuris cogentis regulations. These include for instance option contracts, which are concluded with a bank, if the bank has not informed about option risk before concluding the contract; or the barrier options, which focus only on the protection of bank’s interests. Therefore, such options may appear to be invalid. Therefore, performing contracts for toxic currency options may be qualified as a criminal mismanagement. For the sake of security, the manager should then take into consideration filing a claim for stating invalidity (which can be made in a court verdict. At the same time, if the supervisory board member in a commercial company, who can also be a subject to mismanagement offences, commits an omission involving lack of reaction (for example, if he/she fails to notify of the suspected offence committed by the management board members acting to the company’s detriment when the management board makes the company conclude option contracts which are charged with absolute invalidity the supervisory board member so acting may be considered to act to the company’s detriment. In the most recent Polish jurisprudence and judicature the standard of a “good host” is treated to be the last resort for determining whether the manager’s powers resulting from criminal regulations were performed. The manager of the exporter should not, as a rule, issue any options. Issuing options always means assuming an obligation. In the case of currency put options it is an absolute obligation to purchase a given amount in euro at exchange rate set in advance. On the

  4. Decree No 82-686 of 3 August 1982 concerning the duties of the Minister delegate to the Minister of State, Minister for Research and Industry, responsable for energy

    International Nuclear Information System (INIS)

    1982-01-01

    This Decree further determines the competence of the Minister delegate for energy questions and provides that he will discharge the duties in that field given previously to the then Minister of Industry by Decree No 81-730 of 30 July 1981. (NEA) [fr

  5. Polish-German bilingualism at school. A Polish perspective

    Directory of Open Access Journals (Sweden)

    Pulaczewska, Hanna

    2014-03-01

    Full Text Available This article presents the institutional frames for the acquisition of Polish literacy skills in Germany and the maintenance of Polish-German bilingualism after the repatriation of bilingual children to Poland. These processes are examined in the context of recent developments in the European domestic job market. While the European Union has placed proficiency in several languages among its educational objectives, and foreign languages have been made obligatory school subjects in all member countries, the potential advantages of internal European migrations for producing high-proficiency bilinguals are being ignored. Bilingualism resulting from migration and biculturalism enjoys little social prestige in the host countries. In Germany, there is significant regional variation in how school authorities react to challenges posed by the presence of minority languages. In many cases, the linguistic potential of many second-generation migrants and re-emigrants gets largely wasted because of lacking interest and incentives from German and Polish institutions alike.

  6. Sensing roughness and polish direction

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

    2016-01-01

    As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

  7. Cannabinoids cases in polish athletes

    OpenAIRE

    A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

    2009-01-01

    The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

  8. Graphite Composite Panel Polishing Fixture

    Science.gov (United States)

    Hagopian, John; Strojny, Carl; Budinoff, Jason

    2011-01-01

    The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

  9. Response to the Federal Finance Minister's invitation for industry consultation

    International Nuclear Information System (INIS)

    1986-01-01

    In March 1985, the Canadian Nuclear Association (CNA) presented an extensive brief to the Minister of Finance, Michael Wilson, in response to the challenge issued to Canadians in the Minister's document 'A New Direction for Canada'. This further brief has been prepared in the spirit of the Minister's letter to the CNA dated May 23rd, 1985 in which Mr. Wilson indicated his desire for continued participation of groups such as the CNA in the consultative process. Appended to this brief is a reference sheet entitled 'What Nuclear Energy Means to Canada'. The facts in this sheet are extracted from the 1985 brief and updated with the latest information. Since the major emphasis in energy related discussions is usually on supply and demand of hydrocarbons such as oil and gas, it may come as a suprise to most Canadians that Canada's uranium production contained twice the energy in Canada's crude oil production and exceeded the total energy in all of the country's crude and natural gas production in 1984. Another little known fact is that nuclear power will soon produce more electricity world-wide than all the world's hydro- electric plants. The CNA intends to more widely disseminate this knowledge to the Canadian public. As part of that process it is hoped that the importance of uranium both for domestic use and exports, and Canada's success in harnessing nuclear power for peaceful and beneficial applications, will be fully reflected in decisions and statements related to the development of government fiscal and energy policies. The industry wishes to maintain an ongoing dialogue with government in the following matters: substitution of non-renewable by renewable energy; assurance that electricity sales will not be taxed; maintenance of an open market for uranium with the U.S.A.; continued support in research and development; approval of the Point Lepreau proposal and federal government support for sale of a reactor to Turkey

  10. Dutch Minister of Science Visits ESO Facilities in Chile

    Science.gov (United States)

    2005-05-01

    Mrs. Maria van der Hoeven, the Dutch Minister of Education, Culture and Science, who travelled to the Republic of Chile, arrived at the ESO Paranal Observatory on Friday afternoon, May 13, 2005. The Minister was accompanied, among others, by the Dutch Ambassador to Chile, Mr. Hinkinus Nijenhuis, and Mr. Cornelis van Bochove, the Dutch Director of Science. The distinguished visitors were able to acquaint themselves with one of the foremost European research facilities, the ESO Very Large Telescope (VLT), during an overnight stay at this remote site, and later, with the next major world facility in sub-millimetre and millimetre astronomy, the Atacama Large Millimeter Array (ALMA). At Paranal, the guests were welcomed by the ESO Director General, Dr. Catherine Cesarsky; the ESO Council President, Prof. Piet van der Kruit; the ESO Representative in Chile, Prof. Felix Mirabel; the Director of the La Silla Paranal Observatory, Dr. Jason Spyromilio; by one of the Dutch members of the ESO Council, Prof. Tim de Zeeuw; by the renowned astrophysicist from Leiden, Prof. Ewine van Dishoek, as well as by ESO staff members. The visitors were shown the various high-tech installations at the observatory, including many of the large, front-line VLT astronomical instruments that have been built in collaboration between ESO and European research institutes. Explanations were given by ESO astronomers and engineers and the Minister gained a good impression of the wide range of exciting research programmes that are carried out with the VLT. Having enjoyed the spectacular sunset over the Pacific Ocean from the Paranal deck, the Minister visited the VLT Control Room from where the four 8.2-m Unit Telescopes and the VLT Interferometer (VLTI) are operated. Here, the Minister was invited to follow an observing sequence at the console of the Kueyen (UT2) and Melipal (UT3) telescopes. "I was very impressed, not just by the technology and the science, but most of all by all the people involved

  11. Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

    Directory of Open Access Journals (Sweden)

    Violetta Koseska-Toszewa

    2015-11-01

    Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

  12. Cannabinoids cases in polish athletes

    Directory of Open Access Journals (Sweden)

    A Pokrywka

    2009-07-01

    Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

  13. India Prime Minister urges more awareness to control HIV.

    Science.gov (United States)

    1999-01-04

    With an estimated 3-4 million people infected with HIV, of whom half are aged 18-40 years, India should consider its HIV/AIDS epidemic as a national problem and address it accordingly. The disease also needs to be treated as a societal issue which affects the productivity of both economic and social sectors. The control of HIV and AIDS figures prominently in a new health policy currently being developed. At a seminar on AIDS, Prime Minister of India Atal Behari Vajpayee asked industry to supplement the government's efforts to spread awareness about AIDS. He stressed that business and industry need to seriously acknowledge the reality of HIV/AIDS and act to increase awareness about AIDS by spreading the message about prevention. Awareness is the key to prevention. Millions of HIV-positive people in India are afraid to seek medical care because of undue guilt and stigmatization. Also, young people should be taught about healthy sexual behavior and its implications. Vajpayee urged the minister of health to explore the possibilities of urgently developing an indigenous vaccine for AIDS in the most cost-effective manner.

  14. Ministers of Health: short-term tenure for long-term goals?

    Science.gov (United States)

    Ferraz, Marcos Bosi; Azevedo, Rafael Teixeira

    2011-03-01

    Healthcare investments should consider short and long-term demands. The objectives here were to compare the average tenures of ministers of health in Brazil and in another 22 countries and to evaluate the relationship between ministers' tenures and a number of indicators. Descriptive study conducted at Centro Paulista de Economia da Saúde (CPES). Twenty-two countries with the highest Human Development Indices (HDIs) and Brazil were included. The number of ministers over the past 20 years was investigated through each country's Ministry of Health website. Pearson's correlation coefficient was used to compare the number of ministers in each country with that country's indicators. The Mann-Whitney test was used to compare ministers' tenures in Brazil and other countries. The mean tenure (standard deviation, SD) of Brazilian ministers of health was 15 (12) months, a period that is statistically significantly shorter than the mean tenure of 33 (18) months in the other 22 countries (P < 0.05). There was a moderate and statistically significant positive correlation between the number of ministers and mortality rates for several conditions. The number of ministers also presented moderate and statistically significant negative correlations with per capita total healthcare expenditure (r = -0.567) and with per capita government healthcare expenditure (r = -0.530). On average, ministers of health have extremely short tenures. There is an urgent need to think and plan healthcare systems from a long-term perspective.

  15. Ministers on the Lecture Circuit: Education, Entertainment and Religion in Early 20th Century America

    Directory of Open Access Journals (Sweden)

    Lisa Gonzalez

    2013-12-01

    Full Text Available In the early 20th century, some American ministers were eager participants in the Chautauqua and Lyceum lecture circuits that flourished across the Midwest and beyond. Ministers expressed their vocation in the public arena, and the Redpath Chautauqua collection shows how part of this public life was conducted. In their role as lecturers in multiple educational and civic venues, ministers functioned as experts on the Bible, as well as supporting American ideals that were loosely connected to Protestant Christianity. The essay explores how a substantial archival collection reveals a particular public role ministers played in a popular culture venue in early 20th century America.

  16. Polish energy-system modernisation

    International Nuclear Information System (INIS)

    Drozdz, M.

    2003-01-01

    The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

  17. Energy savings in Polish buildings

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L.C.; Gula, A.; Reeves, G.

    1995-12-31

    A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

  18. SAFETY PLATFORM OF POLISH TRANSPORT

    Directory of Open Access Journals (Sweden)

    Katarzyna CHRUZIK

    2016-03-01

    Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

  19. Polishing compound for plastic surfaces

    Science.gov (United States)

    Stowell, M.S.

    1991-01-01

    This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

  20. Careers of young Polish chemists

    OpenAIRE

    Kosmulski, Marek

    2014-01-01

    Typical young Polish scientist is an alumnus of doctoral studies at the same university and department where he/she completed his/her Master degree. The career is continued by receiving a habilitation at the same university and department. Then a holder of habilitation is promoted to a tenured position at the same university and department. Detailed analysis of scientific careers of 154 recent Ph.D. recipients and of 16 habilitation candidates in chemistry from University of Warsaw is present...

  1. Outsider Presidents and Neophyte Ministers: Evidence from the Fujimori Example

    Directory of Open Access Journals (Sweden)

    Miguel CARRERAS

    2013-07-01

    Full Text Available The critics of presidentialism point out that the arrival to power of outsiders is one of the perils of presidentialism. This contributes to this literature by analyzing the impact of outsider presidents on cabinet composition. The central argument is that outsider presidents tend to appoint technocratic and independent ministers. Outsiders do not have the willingness or the capacity to negotiate with other political forces because they lack a political socialization. Moreover, a strategy of confrontation with established parties is politically and electorally more advantageous for outsider presidents. In this article, I provide empirical evidence based on an in-depth analysis of the Peruvian cabinets in the period 1980-1995. This work compares the cabinets of two presidents that were traditional party leaders (Belaúnde and García with the cabinets of an outsider (Fujimori. I also analyze the consequences of having a cabinet made of political neophytes for the functioning of the cabinet.

  2. Ministers at IAEA Conference Call for Stronger Nuclear Security

    International Nuclear Information System (INIS)

    2013-01-01

    Full text: Despite substantial progress in strengthening nuclear security in recent years, more needs to be done worldwide to defend against the threat of nuclear terrorism and other malicious acts involving nuclear or radiological material, a Ministerial Declaration at the IAEA's International Conference on Nuclear Security: Enhancing Global Efforts stated today. More than 1 300 participants at the Conference, which is open to all 159 IAEA Member States, will analyse past and current efforts and consider how future challenges can best be met to ensure effective and sustainable nuclear security worldwide. The Conference, which started in Vienna today and ends on Friday, includes representatives from 123 countries and 21 governmental and non-governmental organizations. The Ministerial Declaration, adopted at a plenary session attended by 34 government ministers and other Heads of Delegation including the Conference President, Hungarian Foreign Affairs Minister Janos Martonyi, says they ''remain concerned about the threat of nuclear and radiological terrorism and of other malicious acts or sabotage related to facilities and activities involving nuclear and other radioactive material.'' The Declaration - the first of its kind for nuclear security - notes that all States are responsible for their own nuclear security, but that international cooperation is important in supporting States' efforts to fulfil their responsibilities. It affirms the central role of the IAEA in strengthening nuclear security globally, and leading coordination of international activities in this field. ''We encourage all States to maintain highly effective nuclear security, including physical protection, for all nuclear and other radioactive material, their transport, use and storage and their associated facilities, as well as protecting sensitive information and maintaining the necessary nuclear security systems and measures to assess and manage their nuclear security effectively,'' the

  3. 19th Polish Control Conference

    CERN Document Server

    Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

    2017-01-01

    This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

  4. Gevallen op het Binnenhof. Afgetreden ministers en staatssecretarissen 1918-1966

    NARCIS (Netherlands)

    Brand, C.J.M.

    2016-01-01

    The purpose of this book is to gain a better insight into the process concerning the resignation of individual ministers and secretaries of state during the period 1918-1966. This specifically concerns ministers and secretaries of state who were forced - or felt forced - to leave national politics

  5. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photos 01, 02: Felix Rodriguez Mateos (right) explains some of a cryomagnet's myriad connections to the Minister.

  6. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister of Science and Technology, Spain, visited CERN in November. Here Felix Rodriguez Mateos (right) explains aspects of the test facility to the Minister (left). Between them are M. Aguilar Benitez, Spanish delegate to CERN Council (left), and Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee.

  7. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photo 01: The Minister (left) with M. Cerrada and G. Babé.

  8. Mr Nissim Dahan, MK, Minister of Health, Israel, at the ATLAS exhibition

    CERN Multimedia

    Laurent Guiraud

    2001-01-01

    Photo 01: L. to r.:Dr Jim Allaby, Dr Peter Jenni, Prof. Bracha Regev, Chief Scientist, Ministry of Health, Mr Nissim Dahan, MK, Minister of Health, Dr Boaz Lev, Director General, Ministry of Health, Dr Hans F. Hoffmann and Dr Georges Mikenberg. Photo 02: Mr Nissim Dahan, MK, Minister of Health, Israel, signing the Guest Book.

  9. NATO Foreign Ministers December 2017 Meeting : What will emerge from NATO’s December meeting?

    NARCIS (Netherlands)

    Haar, Roberta

    2017-01-01

    What are the prospects of anything concrete emerging from the recent Foreign Ministers meeting at NATO Headquarters in Brussels? Should we anticipate that ministers attending the meeting will be able to build broad international support for any policies that might advance the alliance’s interests in

  10. The tourism attractiveness of Polish libraries

    OpenAIRE

    Miedzińska, Magdalena; Tanaś, Sławoj

    2009-01-01

    The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

  11. 8 December 2011 - Kingdom of Lesotho Deputy Prime Minister and Minister of Home Affairs and Public Safety, and of Parliamentary Affairs A. Lesao Lehohla signing the guest book with Adviser R. Voss and in the ATLAS visitor centre.

    CERN Multimedia

    VMO Team

    2011-01-01

    8 December 2011 - Kingdom of Lesotho Deputy Prime Minister and Minister of Home Affairs and Public Safety, and of Parliamentary Affairs A. Lesao Lehohla signing the guest book with Adviser R. Voss and in the ATLAS visitor centre.

  12. Corporate Politics on Polish Millennials

    OpenAIRE

    Natalia Roślik

    2017-01-01

    In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinat...

  13. Polish Foundation for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Polish Foundation for Energy Efficiency (FEWE) was established in Poland at the end of 1990. FEWE, as an independent and non-profit organization, has the following objectives: to strive towards an energy efficient national economy, and to show the way and methods by use of which energy efficiency can be increased. The activity of the Foundation covers the entire territory of Poland through three regional centers: in Warsaw, Katowice and Cracow. FEWE employs well-known and experienced specialists within thermal and power engineering, civil engineering, economy and applied sciences. The organizer of the Foundation has been Battelle Memorial Institute - Pacific Northwest Laboratories from the USA.

  14. Decree no. 81-730 of 30 July 1981 concerning the responsibilities of the Minister of Industry

    International Nuclear Information System (INIS)

    1981-01-01

    This Decree, which determines the competence of the Minister of Industry, provides that he shall discharge the duties previously given to the Minister of Industry by Decree No. 78-593 of 16 May 1978, with the exception of the responsibilities transferred to the Minister for Research and Technology by Decree No. 81-723 of 28 July 1981. He determines, proposes and implements, in liaison with the Ministers concerned, the Government's policy in industrial development, energy and source materials. (NEA) [fr

  15. The great pipeline debate : the Minister of everything

    International Nuclear Information System (INIS)

    Anon.

    2008-01-01

    This article described the challenges facing Trans-Canada Pipelines (TCPL) in the 1950s regarding the construction of a pipeline to deliver gas to central Canadian markets. Alberta had been granted gas export permits, and the proposed pipeline was financed primarily by American interests. In addition, TCPL had difficulties with several competing proposals to move gas east from Alberta. There was also opposition to TCPL's original route which was through American territory. When the pipeline was rerouted through rugged Precambrian Shield, private-sector financiers balked at the additional costs. During the Great Pipeline debate in 1956, federal Minister C.D. Howe encouraged TCPL and its competitors to merge and put a bill before Parliament to create a Crown corporation to build and own the Canadian Shield portion of the line, leasing it back to TCPL. The first president of TCPL was Eldon Tanner, member of Alberta's Legislative Assembly. He remained at the helm until the pipeline was completed. Industrialist Frank McMahon who participated in drilling activities in British Columbia and at Turner Valley, Alberta, also promoted a plan to complete the construction of the Westcoast Transmission pipeline from the Peace River, Canada's first large natural-gas pipeline. 4 figs

  16. Clean air strategy for Alberta: Report to the ministers

    International Nuclear Information System (INIS)

    1991-11-01

    As a response to continuing discussions on the impact of fossil fuels on global warming, acid deposition, and smog, a clean air strategy consultation program was announced by Alberta's Ministers of Energy and Environment to encourage public discussion on air emissions resulting from the production and use of energy. The consultation program had three objectives: to help identify and clarify the most important issues associated with energy production and use which need to be addressed in developing a clean air strategy; to outline practical and achievable actions which can be taken to reduce emissions; and to develop program and policy recommendations to the provincial government. The consultation program included workshops and regional sessions, as well as background research. The discussions, findings, and conclusions from the program are summarized. Several air quality management challenges were identified, including the need for a more comprehensive system for managing air quality; the priority of local air quality issues and problems; the need to address cumulative regional emissions and impacts; and scientific and economic uncertainties. A number of goals have been developed to address these challenges, such as implementation of a comprehensive air quality management system, identification of cost-effective energy conservation and efficiency opportunities, development of innovative and targeted solutions to manage cumulative emissions, and improvement of the gathering and application of scientific and technical knowledge regarding atmospheric processes and effects. A glossary of terms is included. 12 figs., 17 tabs

  17. BUDGET IN DANGER : OUR LETTER TO THE MINISTERS

    CERN Multimedia

    STAFF ASSOCIATION

    2010-01-01

    In edition no. 104 of Echo we told you about the Finance Committee meeting which took place on Wednesday 16 June and the tense atmosphere that reigned during this meeting. Echoing the alarming news from most of our countries (budget cuts, restrictions, reforms), CERN’s global budget is indeed under pressure. This is extremely serious. How can we carry out our mission if our Member States do not give us the means? Basic research cannot progress with budget cuts. The Management tried to make this understood at the meeting, however, most delegations could not or would not see reason. Refusing to sit idly by, the Staff Association decided to act immediately. It sent a letter to all ministers in the twenty Member States concerned by CERN and its financing. A copy was also sent to all Finance Committee and Council delegates. We thus hope to help convince all our Member States that it is essential that they continue to invest in basic research, a breeding ground for new ideas and at the roo...

  18. Sexual activity of Polish adults

    Directory of Open Access Journals (Sweden)

    Beata Pastwa-Wojciechowska

    2014-03-01

    Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  19. Buffered Electrochemical Polishing of Niobium

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-03-01

    The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

  20. H.E. Mr. Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 01: Signature of the joint statement by H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (centre) with CERN Director-General, L. Maiani (right) and C. Melo. Photo 02: Signature of the joint statement by H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (left) and CERN Director-General, L. Maiani. Photo 03: H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil and CERN Director-General, L. Maiani.

  1. "Be the love of god rather than talk about it": ministers study psychology.

    Science.gov (United States)

    Muravchik, Stephanie

    2012-05-01

    After World War II, American ministers successfully drew on training in psychology to nurture their spiritual and vocational development. Contrary to what critics of a therapeutic ethos in American culture have asserted, this social history of ministers shows that their adoption of psychological modes of thinking was neither atomizing nor secularizing. Rather, it helped them become better people and better ministers. It nurtured their faith as well as their social connections. Thus, I argue against critics who have feared the civically enervating effects of psychological outlooks in American society.

  2. [Medical doctors as the state presidents and prime ministers--a biographical analysis].

    Science.gov (United States)

    Lass, Piotr; Szarszewski, Adam; Gaworska-Krzemińska, Aleksandra; Sławek, Jarosław

    2012-01-01

    The authors overviewed the biographies of 29 medical doctors who became the heads of the state or the prime ministers of their countries. Most of them ruled in a countries of fresh or unstable democracies, most often in Asia, Africa and Latin America, three of them were bloody dictators. With the exemptions of Georges Clemenceau and Sun-Yat-Sen they were not famous as historical figures, although some were good administrators like the prime minister of Norway, Gro Harlem Brundtland, Malayan prime minister Mahatir bin Mohamad, Brasilian and Chilean presidents, Juscelino Kubitschek and Veronica Bachelet. Regarding specialisation was mostly general medics or they specialised in public health.

  3. Polish Industry and Art at CERN

    CERN Multimedia

    2000-01-01

    On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

  4. Corporate Politics on Polish Millennials

    Directory of Open Access Journals (Sweden)

    Natalia Roślik

    2017-12-01

    Full Text Available In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinational companies are paying special attention to Millennials and trying to hire them before competitors will do so. As a part of this paper, an author will describe corporate politics and practices on Thomson Reuters and BNY Mellon examples. Within this work, an author is also discussing key features and differences between this generation and Millennials parent’s generation. Additionally, there is a reference to corporate social responsibility concept and work-life balance issues.

  5. Determinants of Polish public debt

    Directory of Open Access Journals (Sweden)

    Tomasz Stryjewski

    2011-12-01

    Full Text Available The crisis, which had its beginning in 2007, turned into the debt crisis of the countries. The examples of Greece, Ireland, Iceland or Spain showed the category of public debt in a new light. Poland, at the turn of 2010/2011 also achieved the upper level of public debt acceptable by the law. In the present situation of the European Union countries being in debt, and even insolvent, the situation in Poland becomes riskier. This article attempts at an empirical verification of the determinants of Polish public debt within 95 months (the data link with the period of time from January 2003 to November 2010. The verification of the main factors which cause the formation of public debt takes place by means of an appropriately verified econometric model.

  6. Zerodur polishing process for high surface quality and high efficiency

    International Nuclear Information System (INIS)

    Tesar, A.; Fuchs, B.

    1992-08-01

    Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

  7. 27 October 2014 - L. Pistelli Vice Minister at Foreign Affairs and International Cooperation, Italian Republic

    CERN Multimedia

    Guillaume, Jeanneret

    2014-01-01

    Mr Lapo Pistelli Vice Minister at Foreign Affairs and International Cooperation, Member of the Italian Parliament (Chamber of Deputies), Italian Republic, signing the Guest Book with CERN Director-General R. Heuer ; Physics Department Head L. Mapelli also present

  8. Visit to CERN by the Israeli Minister of Science, Culture and Sport

    CERN Multimedia

    2007-01-01

    Galeb Majadle, the Israeli Minister of Science, Culture and Sport, and Robert Aymar, CERN’s Director-General. Israeli Minister, Galeb Majadle was invited to install the final thin gap muon chambers for the big muon wheels of ATLAS.On 26 July, Galeb Majadle, the Israeli Minister of Science, Culture and Sport, who is the first Arab member of an Israeli government, paid a visit to CERN. After being shown round the Laboratory, the Minister went to the ATLAS muon chamber assembly hall, where he was invited to install the final thin gap muon chambers for the big muon wheels of ATLAS. Israeli institutes are heavily involved in manufacturing these detectors. They have long-standing expertise in the field, as it was Israeli groups who developed the thin gap chambers (TGC) for the OPAL experiment. Since then, this technology has been optimized for ATLAS. Construction of the TGC wheels has been entrust...

  9. H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (second from right) with R. Salmeron, C. Melo, A. Dos Anjos and H. Pessoa Lima Junior

  10. Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

    Science.gov (United States)

    Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

    2014-01-01

    Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

  11. Port's new fees, behavior irk operators

    Index Scriptorium Estoniae

    2004-01-01

    Tallinna Sadama otsus tõsta sadamatasusid on kutsunud esile teiste sadamaoperaatorite ja laevakompaniide pahameele. Kommentaarid Tallinna Sadama juhatuse esimehelt Eero Tohverilt, Tallink Group'i finantsdirektorilt Andres Hundilt ja sadamaoperaatorite liidu tegevdirektorilt Ago Tiimanilt

  12. Mr. Matan Vilnai, Israeli Minister of Science, Culture and Sport visited CERN on 20 March

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    No 17: Mr. Yuval Ne\\'eman, director of the centre for advanced studies at Tel-Aviv University, explains the standard model of physics to the Minister. No 20 : left to right, H.E. Mr. David Peleg, Ambassador and Permanent Representative of Israel to the UN, Minister Vilnai, Professor Hagit Meser Yaron, Chief Scientist at the Ministry of Science, Culture and Sport, and Mr. Nachman Shai, Director General of the Ministry with Giora Mikenberg, ATLAS and OPAL physicist

  13. Who is populist in Central and Eastern Europe? A comparative analysis of prime ministers' populist discourse

    OpenAIRE

    Kocijan, Bojana

    2015-01-01

    This article measures populist discourse among prime ministers in new Central and Eastern European democracies using holistic grading as a specific type of textual analysis. The article first offers a definition of populism and then measures political discourse by grading political speeches of contemporary prime ministers in Central and Eastern Europe. Next, it presents descriptive data about prime ministers’ political discourse and discusses positive cases of populism in re...

  14. H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 01: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (centre) with C. Melo (left) and P. Jenni Photo 02: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (centre) with C. Melo (left) and P. Jenni. Photo 03: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (second from right) with R. Salmeron, C. Melo, A. Dos Anjos and H. Pessoa Lima Junior. Photo 05: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (second from left) with, from left to right C. Melo, R. Salmeron, P. Jenni. Photo 06: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (left) with C. Melo. Behind, J. Ellis and J.A. Rubiol. Photo 07: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science,...

  15. Technological Advances of Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

    The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

  16. 'Fannibals' ministéricos: el poder del 'Fandom'

    Directory of Open Access Journals (Sweden)

    Raquel Crisóstomo

    2016-05-01

    Full Text Available El fandom ha adquirido en los últimos años un protagonismo esencial. Si bien no se trata de algo nuevo ni perteneciente en exclusiva al campo de la serialidad, como muy bien ya explicó Henry Jenkins en Fans, Bloggers, and Gamers: Exploring Participatory Culture (2006, sí que es cierto que ha evolucionado hasta convertirse en uno de los elementos clave de la cadena alimenticia serial. Sus aportaciones –y sobre todo su implicación– han decidido en distintas ocasiones la continuidad de una serie o la defenestración de un personaje, y quizás lo más importante, han dado lugar a la generación de universos narrativos circundantes y alternativos. Esta comunicación se propone ahondar en el comportamiento del fandom y sus consecuencias a través del estudio de las distintas muestras y ejemplos de acciones llevadas a cabo (transmediáticas o no en relación a distintas series producidas sobre todo en Estados Unidos durante los últimos 15 años. Y aunque se aludirá por lo tanto a diversos fandom seriales, en especial se centrará en dos casos recientes bastante distintos: los fannibals (fandom de la serie Hannibal [NBC, 2012-2015] y los ministéricos (de la serie El ministerio del tiempo [La 1, 2015-], por tratarse de dos series muy distintas y por lo tanto, de dos comunidades también muy diferentes. La primera, una serie estadounidense de tres temporadas cuya cancelación ha aumentado si cabe su cohorte de seguidores; y la segunda una serie española de la que en principio estaba prevista una temporada y de la que ya se ha anunciado la segunda para el 2016. El objetivo principal será concluir la alta capacidad de influencia de estos colectivos en las series de la tercera edad de oro televisiva, ya sea en referencia a los elementos constructivos de las series, en cuanto a sus personajes o por lo que respecta al ámbito de la transmedia, donde quizás se ha notado más la evolución de la huella de este colectivo en el mundo de la ficci

  17. Jewish problem in the Polish Communist Party

    Directory of Open Access Journals (Sweden)

    Cimek Henryk

    2016-12-01

    Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

  18. Electrolytic polishing system for space age materials

    International Nuclear Information System (INIS)

    Coons, W.C.; Iosty, L.R.

    1976-01-01

    A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

  19. Trace element analysis of nail polishes

    International Nuclear Information System (INIS)

    Misra, G.; Mittal, V.K.; Sahota, H.S.

    1999-01-01

    Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

  20. Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

    Directory of Open Access Journals (Sweden)

    Danuta Roszko

    2015-06-01

    Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

  1. The Kaliningrad Region in Exposé of Ministers of Foreign Affairs of Poland in 2005-2016

    Directory of Open Access Journals (Sweden)

    Yana A. Vorozheina

    2017-03-01

    Full Text Available Geographical and geopolitical proximity of the exclave Kaliningrad region and the Republic of Poland can be an essential basis for the formation of “Kaliningrad vector” of Warsaw’s foreign policy (which might be a course separate from the general Poland’s foreign policy towards Russian Federation. In this regard, the welltimed assessment of the features of the Poland’s conceptual vision of neighborhood with exclave territory of Russia, as well as the nature and level of official Warsaw’s interest in development of cooperation with the Kaliningrad region is extremely important. The evaluation of the impact of implementation of the Agreement between the Government of the Republic of Poland and the Government of the Russian Federation on the Rules of Local Border Traffic on significance of “Kaliningrad’s focus” in the foreign policy strategy of the official Warsaw is also extremely important. In this context, it should be understood that thanks to this agreement, the Kaliningrad region has acquired an additional specificity in the context of Russian-Polish relations. This article is the attempt to determine the today’s place and role of the Kaliningrad region in Poland’s foreign policy strategy after joining the EU. The author reveals the period of updating theme of Poland’s cooperation with the Kaliningrad region, as well as shows its nature and origins by analyzing the annual keynote addresses of the foreign ministers of Poland, which are concentrated on the basic provisions of the official foreign policy strategy of Warsaw.

  2. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  3. Conformal polishing approach: Tool footprint analysis

    Directory of Open Access Journals (Sweden)

    José A Dieste

    2016-02-01

    Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

  4. Polishing of silicon based advanced ceramics

    Science.gov (United States)

    Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

    2009-05-01

    Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

  5. Interculutral Polish-Chinese QQing

    Directory of Open Access Journals (Sweden)

    Elżbieta Gajek

    2012-12-01

    Full Text Available Working in tandem with the use of information and communication technologies is well-known and frequently used as a method of supporting learning of foreign languages in authentic communication. It is based on a constructivist approach to teaching. In the reported case study Polish and Chinese students discussed in English preprepared topics. The work shows the potential of e-learning at the micro level, as the language and intercultural task is implemented into an academic course without modification of the objectives and learning outcomes of the course. Evaluation carried out at the end of the project indicates that both groups perceived the task as a significant linguistic, cultural and personal experience. They stressed the importance of sharing “culture for culture” as the partner culture was new for most of them. The ability to talk and respond to information which was often strange, from the point of view of their own culture, allowed for learning intercultural competence ̔in action’.

  6. [Professor Adam Nowosławski (1925-2012)--founder of the Polish School of Immunopathology].

    Science.gov (United States)

    Madaliński, Kazimierz

    2012-01-01

    Professor dr med. Adam Nowosławski, has died at age of 87, on February 3, 2012, the founder of the Polish school of immunopathology, member of Polish Academy of Sciences and of Polish Academy of Art and Sciences. Professor was born on April 30, 1925 in Rzeszów (SE Poland). During the Second World War he took part in the anti-nazi resistance movement; he was the soldier of the 'Baszta' regiment of the Home Army. Subsequently, he was imprisoned in the Pawiak and concentration camps: Majdanek and Buchenwald. The medical studies he has completed at Warsaw Medical Academy between 1946-1951. The degree of doctor of medicine Prof. Adam Nowosławski has obtained in 1963, habilitation degree in the field of immunopathology--in 1966; the title of Professor he has obtained in 1980. His scientific achievements consist of 170 publications, including 101 original papers. His publications were quoted in several American books for students and physicians. Topics of his early papers concerned the immunopatogenesis ofPneumocystis carinii--induced pneumonia in premature babies, immunopatogenesis of rheumatoid arthritis, and the origin of rheumatoid factor. The enormous role in the field of hepatology played research on the virus of hepatitis B. These studies dealt with the discovery of HB core antigen which had the cellular localization different from HB surface antigen and with the parameters of the immune response to infection. Papers published on this topic were the mostly quoted in the literature and earned him national awards. The activity of Prof. Adam Nowosławski in the field of HIV/AIDS prevention was honored by the special prize of the Minister of Health. Professor was the honorary member of the two Societies: Polish Society of Pathologists and Polish Society of Hepatology. He was also the member of International Association for the Study of the Liver and International Academy of Pathology. Prof. Adam Nowosławski received the national medals: Polonia Restituta Crosses

  7. Smoking characteristics of Polish immigrants in Dublin.

    LENUS (Irish Health Repository)

    Kabir, Zubair

    2008-01-01

    BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

  8. H.E. Mr Josep Piqué i Camps, Minister of Science and Technology, Spain

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    Photo 01: H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain (right foreground) visiting SM 18 with (from left to right) F. Rodriguez Mateos, G. Babé, C. Dopazo in front of H.E. Mr J. Pérez-Villanueva y Tovar, Ambassador. Photo 05: The delegation, accompanied by Spanish scientists at CERN, also visited the LHC superconducting magnet test hall. From l. to r.: Matteo Cavalli-Sforza of CERN, Josep Piqué i Camps, Spanish Minister of Science and Technology, César Dopazo, Director-General of CIEMAT (Spanish Research Centre for Energy, Environment and Technology), Juan Antonio Rubio, ETT Division Leader at CERN, Manuel Aguilar-Benitez, Spanish Delegate to Council, Gonzalo León, Secretary-General of Scientific Policy to the Minister, and Manuel Delfino, IT Division Leader at CERN.

  9. Maria van der Hoeven, the Netherlands minister for education, culture and science, visited CERN

    CERN Multimedia

    maximilien Brice

    2005-01-01

    On 21 April, the Netherlands Minister for Education, Culture and Science, Mrs Maria van der Hoeven, was welcomed to CERN by the Director-General, Robert Aymar, and the Chief Scientific Officer, Jos Engelen. Minister van der Hoeven visited the ATLAS installations, the LHC tunnel and the magnet assembly and test hall before meeting a group of young scientists from the Netherlands. Picture 05 : from left to right, Frank Linde, Director of the Netherlands National Institute for Nuclear Physics and High Energy Physics (NIKHEF), Jos Engelen, CERN's Chief Scientific Officer, Maria van der Hoeven, Netherlands Minister for Education, Culture and Science, and Herman Ten Kate, Head of the ATLAS magnet project, visiting the ATLAS assembly hall.Picture 09 ; Here she talks with, from left to right, Jos Engelen, CERN's chief scientific officer, Peter Jenni, the ATLAS spokesman, Herman Ten Kate, head of the ATLAS magnet project, and Frank Linde, director of the Netherlands National Institute for Nuclear Physics and High Ener...

  10. APS 3D: a new benchmark in aspherical polishing

    Science.gov (United States)

    Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

    2017-10-01

    The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

  11. Visit of Japanese Minister for Education, Science and Culture, Kaoru Yosano

    CERN Multimedia

    Laurent Guiraud

    1995-01-01

    Hubert Curien (in the middle) with the Japanese Minister for Education, Science and Culture, Kaoru Yosano, and CERN's Director-General, Christopher Llewellyn Smith, at the ceremony marking the start of collaboration between CERN and Japan in 1995. At this ceremony to mark the start of collaboration between CERN and Japan, Minister Yosano presented Professor Llewellyn Smith with a wooden Daruma doll. In line with Japanese tradition, the doll was painted with one eye to mark the start of the LHC project and the second eye will be added upon the project's completion.

  12. Memoranda by A.P. Uspensky to the Council of Ministers of the Provisional Siberian government

    Directory of Open Access Journals (Sweden)

    Sukhanov Aleksandr

    2015-06-01

    Full Text Available This publication offers a previously unknown memoranda by representative of the diocesan assembly of deputies of the clergy and laity of the Tomsk diocese A. P. Uspensky, addressed to the Council of Ministers of the Provisional Siberian government in July 1918. A.P. Uspensky solicited for formation of the Ministry of confessions in the Provisional Siberian government. Memoranda are initiative documents to the Statute on the Chief Administration of religious denominations adopted by the Council of Ministers of the Russian government on December 27, 1918.

  13. 3rd May 2009 - Japanese Minister of State for Science and Technology Policy, Food Safety, Minister of Consumer Affairs, Minister of Space Policy S. Noda, visiting ATLAS experimental area, LHC tunnel and CERN Control Centre with CERN Director-General R. Heuer, Collaboration Spokesperson F. Gianotti and Beams Department Head P. Collier.

    CERN Document Server

    Maximilien Brice

    2009-01-01

    090506101-08: signature of the guest book and exchange of gifts; 090506109 + 46-64: Japanese Ambassador to the United Nations Office S. Kitajima, Japanese Minister of State for Science and Technology Policy, Food Safety, Minister of Consumer Affairs, Minister of Space Policy S. Noda, CERN Director-General R. Heuer, Non Member-State relations Adviser J. Ellis and ATLAS Collaboration Spokesperson F. Gianotti visiting the LHC tunnel at Point 1; 090506110-11 + 28-45: Japanese Minister of State for Science and Technology Policy, Food Safety, Minister of Consumer Affairs, Minister of Space Policy S. Noda and his delegation visiting ATLAS experimental area with CERN Japanese users and Management; 090506112 + 86-94: Japanese Minister of State for Science and Technology Policy, Food Safety, Minister of Consumer Affairs, Minister of Space Policy S. Noda, CERN Director-General R. Heuer and Japanese users in front of an LHC superconducting magnet; sLHC Project Leader also present. 090506113-19: Arrival of Japanese Min...

  14. Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

    Directory of Open Access Journals (Sweden)

    Piotr Žmigrodzki

    2014-12-01

    Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

  15. Resolutions and Recommendations on Sport Adopted by the Committee of Ministers, 1967-86.

    Science.gov (United States)

    Council of Europe, Strasbourg (France). Committee for the Development of Sport.

    This document contains resolutions on sport recommended by the Committee for the Development of Sport (CDDS) and adopted by the Committee of Ministers for the Development of Sport of the Council of Europe. The adopted resolutions cover the following topics: (1) doping of athletes; (2) the medical aspects of sport; (3) hygiene of sport…

  16. Collecte de connaissances féministes en vue d'exercer une ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Collecte de connaissances féministes en vue d'exercer une influence sur les politiques publiques. Financée par le Programme des Nations Unies pour le développement (PNUD), l'initiative Casablanca rassemble des militantes et des universitaires du Sud, afin d'intégrer les connaissances des femmes à la question de la ...

  17. Press conferences with Federal Minister for Research and Technology Dr. A. v. Buelow

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    Within the framework of the 'International Breeder Report' the German Minister for Research and Technology Dr. A. v. Buelow had agreed to answer questions of numerous domestic and foreign journalists. An except of the vivid discussion is given. (orig./UA) [de

  18. Prof. Dr. Slobodan Backović, Minister of Education and Science of Montenegro visits CERN

    CERN Multimedia

    Claudia Marcelloni

    2007-01-01

    Signature of a Co-operation agreement between The European Organisation for Nuclear Research (CERN) represented by the Director-General and The Government of Montenegro, represented by the Minister of Education and Science, concerning Scientific and Technical Co-operation in High-Energy Physics

  19. A critical analysis of the majority judgment in F v Minister of Safety ...

    African Journals Online (AJOL)

    The majority judgment of Mogoeng CJ in F v Minister of Safety and Security 2012 1 ... norms now play an important role in deciding questions of vicarious liability. ... the conduct of the employee wrongdoer and the business of his employer as ...

  20. IN F V MINISTER OF SAFETY AND SECURITY 2012 1 SA

    African Journals Online (AJOL)

    10332324

    between the employee's delictual conduct and the business of his employer. ... K v Minister of Safety and Security 2005 6 SA 419 (CC) (hereafter K). 3 ..... safety of the public and accountability of employers and the state for the risks and harms ...

  1. Kanada minister Van Loan on hobieestlane / Peter Van Loan ; interv. Marje Aksli

    Index Scriptorium Estoniae

    Van Loan, Peter

    2007-01-01

    Kanada konservatiivse valitsuse parlamendiasjade juht ja demokraatliku reformi minister vastab küsimustele, mis puudutavad eestlaste hulka tema valimisringkonnas, kohtumist president Toomas Hendrik Ilvesega, viisavabaduse andmist Eestile, samuti pronkssõdurit ja vene poliitikute väidet, et Eestis tõstab pead natsism

  2. Dr Jung Hyun KIM Vice Minister for Education, Science and Technology MEST Republic of Korea

    CERN Multimedia

    Jean-Claude Gadmer

    2010-01-01

    He learnt about CERN's LHC computing grid project from Frédéric Hemmer, head of the information technology department. In addition, the vice-minister toured the ATLAS visitor centre, the CMS control centre, the ALICE experiment's exhibition and control room, and he met Korean scientists at CERN.

  3. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister of Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. In this series of photos Felix Rodriguez Mateo explains the operation of the test facilty to the ministerial party. Photo 01: (left to right) Felix Rodriguez Mateo; the Minister; Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee; M. Aguilar Benitez, Spanish delegate to the CERN Council; G. Babé and G. Léon. Photo 02: (left to right) Felix Rodriguez Mateos; César Dopazo, Director-General of CIEMAT (Spanish Research Centre for Energy, Environment and Technology); the Minister; G. Babé; M. Aguilar Benitez; and G. Léon. Photo 03: Francisco Giménez-Reyna; Felix Rodriguez Mateos; César Dopazo; the Minister; Juan Antonio Rubio, leader of the Education and Technology Transfer division at CERN; G. Babé behind M. Aguilar Benitez. Photo 04: Francisco Giménez-Reyna, partially hidden behind Felix Rodriguez Mateos; César Dop...

  4. The Honorable Dr Adolfo Urso, Vice Minister for Foreign Trade, "Viceministro delle Attivita' Produttive, Italia"

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    Photo 01: The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy, visiting SM18 with (from l to r): Dr Roberto Saban, Technical Coordination and Planning, LHC machine; Prof. Luciano Maiani, CERN Director-General; Dr Mario Gerbino, Director General of the Ministry and Prof. Lucio Rossi, LHC Main Magnet and Superconductors (MMS) Group Leader. Photo 02: Prof. Luciano Maiani, CERN Director-General and The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy, in front of one of the LHC superconducting magnet in SM18. Photo 03 :In front of one of the LHC superconducting magnets - from left to right Dr Roberto Saban, Technical Coordination and Planning, LHC machine; The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy and Prof. Luciano Maiani, CERN Director-General. Photo 04: In the SM18 hall (from l. to r.) Prof. Luciano Maiani, CERN Director-General, The Honorable Dr Adolfo Urso, Deputy Minister for Productive Activities, Italy and Dr Mario Ge...

  5. Minister wants age balance to play greater role in redundancy selection

    NARCIS (Netherlands)

    Grünell, M.

    2004-01-01

    In May 2004, the Dutch Minister of Social Affairs proposed changes to the statutory rules on selection for redundancy, with less emphasis on the last in, first out seniority-based principle and a greater focus on distributing the redundancies between employees of different ages. The social partners

  6. Realizing the European Higher Education Area: Berlin Conference of European Higher Education Ministers

    Science.gov (United States)

    European Education, 2004

    2004-01-01

    The Bologna Declaration of June 1999 has put in motion a series of reforms needed to make European higher education more compatible and comparable, more competitive and attractive for European citizens and for citizens and scholars from other continents. In Prague, in May 2001, the ministers took note of the progress so far and added three new…

  7. Cort van der Linden (1846-1935) : Minister-president in oorlogstijd : een politieke biografie

    NARCIS (Netherlands)

    Hertog, Johannes Paul den

    2007-01-01

    This political biography analyzes the political influence of, and methods used by, P.W.A. Cort van der Linden (1846-1935), Dutch Prime-Minister from 1913 to 1918. While he was a Professor of Economics he developed a view of liberalism based on German idealism which also included a progressive use

  8. Ülevabariigiline operatsioon "Minister Tuiksoo päästmine" / Kadri Paas

    Index Scriptorium Estoniae

    Paas, Kadri, 1982-

    2005-01-01

    Autori sõnul saatis Põllumajandustootjate Keskliit pärast põllumajandusminister Ester Tuiksoo kihutamist vilkuriga autos laiali tänukirja, et minister nende koosolekule ei hilinenud. Põllumajandusministeeriumi väitel saatis Virumaa Teataja ajakirjanik Imre Termonen ministrile ähvardava ja mõnitava meili

  9. Underneath the culture of consensus: Transparency, credible commitments and voting in the Council of Ministers

    DEFF Research Database (Denmark)

    Finke, Daniel

    2017-01-01

    The Council of Ministers rarely records negative individual votes, much less rejected proposals. The literature explains this high level of support by the Council’s ’culture of consensus’ and the few negative votes are explained as signalling to the domestic audience. We introduce an alternative...

  10. 21 CFR 872.6030 - Oral cavity abrasive polishing agent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

  11. Chemical Mechanical Polishing Optimization for 4H-SiC

    National Research Council Canada - National Science Library

    Neslen, Craig

    2000-01-01

    .... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

  12. Microbiological flora and nail polish: a brief report.

    Science.gov (United States)

    Rayan, G M; Flournoy, D J; Schlageter, P

    1994-11-01

    Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

  13. Monitoring of Robot Assisted Polishing through parameters of acoustic emission

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Bilberg, Arne

    The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

  14. Polish Qualitative Sociology: The General Features and Development

    OpenAIRE

    Konecki, Krzysztof Tomasz

    2005-01-01

    The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

  15. Minister Peng stresses the necessity for improving the working style in family planning implementation.

    Science.gov (United States)

    1993-06-01

    China's State Counselor and Minister of the State Family Planning (FP) Commission is reported to have made suggestions on improving FP effectiveness to officials in Qianshan and Jinzhai counties of Anhui Province, in Hongya and Mingshan counties of Sichuan Province, and in Dezhau Prefecture and Tai'an City of Shandong Province. In Anhui Province, Minister Peng Peiyun emphasized the importance of FP at the grassroots level and the responsibility of providing education, publicity, and contraceptive services to each couple of childbearing age. Publicity is needed to popularize the advantages and necessity of deferred marriage, deferred childbearing, fewer and healthier births, and gender equality. In Sichuan, Minister Peng state that FP is important for economic development. Other benefits are an improved standard of living, an improvement in women's social status, the formation of healthier and happier families, and improvement in the quality of human resources. Minister Peng stressed that social reform could change existing habits and customs. Publicity should be specific to conditions in each province and include information on how to increase family income, scientific production skills, and good child-rearing practices. Contraceptive services should be available in every village, and quality must be improved. This means wider contraceptive choices, more concern for the day-to-day problems of families with one daughter, and improved training of FP technicians to increase safety and reliability. In Shandong Province, Minister Peng urged that quotas be retained, but the pressure should be reduced on subordinating departments. Targets for FP implementation can be attained when major departments cooperate with those on grass roots level. Requirements must be practical. All couples should be permitted to bear a second child after a birth interval of several years. Program quality can be improved by upgrading worker's skills and building a large group of qualified FP

  16. Professional Training of Economists at Polish Universities

    Science.gov (United States)

    Ogienko, Olena

    2016-01-01

    Polish experience in professional training of economists at university has been generalized. Structural, content and procedural peculiarities of the training have been defined. It has been proved that key factors for reforming economic education in Poland are globalization, internationalization, integration, technologization and informatization.…

  17. Knowledge Mobilisation in the Polish Education System

    Science.gov (United States)

    Fazlagic, Jan; Erkol, Arif

    2015-01-01

    Poland has made substantial progress in improving the quality of its education system in recent years. This paper aims to describe the situation of the Polish education system from a knowledge management perspective and, to some extent, through innovation policies in education. The many challenges, this paper argues, can be tackled only through…

  18. Sexual Health of Polish Athletes with Disabilities

    Directory of Open Access Journals (Sweden)

    Ryszard Plinta

    2015-06-01

    Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

  19. Directory of Polish Officials: A Reference Aid

    Science.gov (United States)

    1989-04-01

    Jan 86 Deputy Director Mondalski, Janusz Aug 83 Polish Steamship Company (Polski Zegluga Morska ) (PZM) Director Andruczyk, Mieczyslaw Jan...2<> Polski Kosciol Chrzescijan Baptystow 12° Polski Linie Oceaniczne ’"- Polski Towarzystwo Ekonomiczne ’’° Polski Zegluga Morska 102 Polski

  20. Polish students’ opinion about medicinal cannabis

    Directory of Open Access Journals (Sweden)

    Rafał Mazur

    2017-09-01

    Conclusions: Polish students seem to be ready for introduction into medical marijuana and are aware of its therapeutic potential. The majority is in favor of sales in a controlled manner. The task of researchers should be accurate examination of the effectiveness of specific cannabinoids in the treatment of diseases.

  1. Transformation of the Polish Banking Sector

    Directory of Open Access Journals (Sweden)

    Marek Stefański

    2009-07-01

    Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single

  2. Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

    Science.gov (United States)

    Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

    2015-01-01

    This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

  3. Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

    Czech Academy of Sciences Publication Activity Database

    Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

    2016-01-01

    Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

  4. STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

    Directory of Open Access Journals (Sweden)

    François GOOSSENS

    2015-05-01

    Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

  5. Emissions from the Polish power industry

    International Nuclear Information System (INIS)

    Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

    2007-01-01

    Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

  6. Chemical polishing of epitoxial silicon wafer

    International Nuclear Information System (INIS)

    Osada, Shohei

    1978-01-01

    SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

  7. Dr. Mostafa Moin, Minister of Science, Research and Technology, Islamic Republic of Iran

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    L. to. r.:Dr Henrik Foeth, Team Leader, CMS experiment; Dr Daniel Denegri, Physics Coordinator, CMS experiment; Prof. Tejinder Virdee, Deputy Spokesman, CMS experiment; Prof. Luciano Maiani, CERN Director-General (signing); Mr Jean-Marie Dufour, Head of the Legal Service, Mr Ghodratollah Habibpour Gharakol (back); Dr Abdolali Sharghi, Advisor to the Minister and Director General, Office of International Scientific Cooperation, Ministry of Science, Research and Technology; Dr Mostafa Moin, Minister of Science, Research and Technology, Islamic Republic of Iran (signing); Dr Reza Mansouri, Director, International Scientific Meetings Office, Ministry of Science, Research and Technology; H. E. Dr Ali Khorram, Extraordinary and plenipotentiary Ambassador to the United Nations in Geneva and Dr Hans F. Hoffmann, CERN Director for Technology Transfer & for Scientific Computing. _

  8. Polish normalization of the Body Esteem Scale

    Directory of Open Access Journals (Sweden)

    Małgorzata Lipowska

    2014-02-01

    Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

  9. An assessment of the management skills required of ministers in the Reformed Churches of South Africa

    Directory of Open Access Journals (Sweden)

    A. B. Grobler

    2008-07-01

      The research concludes with a recommendation that considera- tion should be given to include a course on management in the training syllabus of aspiring ministers. Furthermore, it is sugges- ted that this course be developed specifically taking into ac- count the background and circumstances of the Reformed Churches of South Africa, and should not be generic like the course which is included for Baccalaureus Commercii or Mas- ters of Business Administration (MBA students.

  10. Mr. Eduard Zeman, Minister of Education, Youth and Sport, Czech Republic

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    Mr Eduard Zeman (third from left), Minister of Education, Youth and Sport, Czech Republic, visiting CERN's permanent exhibition, Microcosm, with (from left to right) Dr Rupert Leitner, ATLAS Tile Calorimetry Project Leader; Mr P. Cink, Ministry of Education, Youth and Sport; Dr Ivan Lehraus, Committee for Collaboration of the Czech Republic with CERN; and H.E. Mr Milan Hovorka, Ambassador, permanent representative of the Czech Republic to the United Nations in Geneva.

  11. Address by the Baden-Wuerttemberg State Minister of Economics, Mr. Martin Herzog

    International Nuclear Information System (INIS)

    Herzog, M.

    1986-01-01

    In his address to the participants of the 7th Nuclear Inter Jura '85, the Baden-Wuerttemberg State Minister of Economics, Mr. Martin Herzog describes the situation of nuclear power in Baden-Wuerttemberg. He states that nuclear law has become a difficult topic, mainly because of the close connection between law and technology, and the international character of nuclear law. Therefore it is important to improve transparency of nuclear law on a national and an international level. (WG) [de

  12. 11th June 2009-Cyprus-Minister of Education and Culture H. E. Prof. Andreas Demetriou

    CERN Multimedia

    Maximilien Brice

    2009-01-01

    Tirage 1 :CERN Director-General, R. Heuer and Minister of Education and Culture, H. E. Prof. Andreas Demetriou; Tirage 2:Council President,T. Åkesson, Ecole Normale Supérieure,K. Kounnas, Chairman of the Cyprus CERN Committee,C. N. Papanicolas, R. Heuer,A. Demetriou, Permanent Representative of the Republic of Cyprus in Geneva,A. Hadjichrysanthou, Directorate Office,E. Tsesmelis

  13. Memoranda by A.P. Uspensky to the Council of Ministers of the Provisional Siberian government

    OpenAIRE

    Sukhanov Aleksandr

    2015-01-01

    This publication offers a previously unknown memoranda by representative of the diocesan assembly of deputies of the clergy and laity of the Tomsk diocese A. P. Uspensky, addressed to the Council of Ministers of the Provisional Siberian government in July 1918. A.P. Uspensky solicited for formation of the Ministry of confessions in the Provisional Siberian government. Memoranda are initiative documents to the Statute on the Chief Administration of religious denominations adopted by the Council...

  14. Robotic Automation in Computer Controlled Polishing

    Science.gov (United States)

    Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

    2016-02-01

    We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

  15. ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

    Energy Technology Data Exchange (ETDEWEB)

    Ribeill, G.; Reece, C.

    2008-01-01

    Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

  16. Effects of polishing procedures on color stability of composite resins

    Directory of Open Access Journals (Sweden)

    Ahmet Umut Güler

    2009-04-01

    Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

  17. Tribological approach to study polishing of road surface under traffic

    OpenAIRE

    KANE, Malal; DO, Minh Tan

    2007-01-01

    The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

  18. Polish Phoneme Statistics Obtained On Large Set Of Written Texts

    Directory of Open Access Journals (Sweden)

    Bartosz Ziółko

    2009-01-01

    Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

  19. Polish Qualitative Sociology: The General Features and Development

    OpenAIRE

    Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

    2005-01-01

    Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

  20. 23 February 2010 - Polish Under Secretary of State, Ministry of Science and Higher Education, J. Szwed visiting CERN installations with sLHC Project Office T. Kurtyka and Machine Protection and Electrical Integrity Group Leader A. Siemko.

    CERN Multimedia

    Michel Blanc

    2010-01-01

    Tirage 1002023-01: In LHCb experimental area with Machine Protection and Electrical Integrity Group Leader A. Siemko; Mission Counselor M. Cichucka; Counselor to the Minister M. Klimkiewicz, Under Secretary of State J. Szwed; LHCb Collaboration, national group leader, Henryk Niewodniczanski Institut of Nuclear Physics G. Polok, Collaboration Spokesperson A. Golutvin and Delegate to CERN Council A. Zalewska. Tirage 28: Visiting the Computing Centre with IT Department Head F. Hemmer Tirage 49: In CMS Control centre, buiding 354 with Collaboration Spokesperson G. Tonelli and CMS Collaboration, national group leader, University of Warsaw J. Krolikowski. Tirage 62: visiting ALICE exhibition area and counting room with Collaboration Spokesperson J. Schukraft. Tirage 82-99: Under Secretary of State address to the Polish Community Tirage 82: Machine Protection and Electrical Integrity Group Leader A. Siemko Tirage 83: Polish Delegate to CERN Council A. Zalewska. Tirage 85: Directorate Office E. Rondio Tirage 86: ATLA...

  1. Assessing operability of a novel polisher arrangement using MMS

    International Nuclear Information System (INIS)

    Shor, S.W.W.

    1987-01-01

    A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

  2. Slower nicotine metabolism among postmenopausal Polish smokers.

    Science.gov (United States)

    Kosmider, Leon; Delijewski, Marcin; Koszowski, Bartosz; Sobczak, Andrzej; Benowitz, Neal L; Goniewicz, Maciej L

    2018-06-01

    A non-invasive phenotypic indicator of the rate of nicotine metabolism is nicotine metabolite ratio (NMR) defined as a ratio of two major metabolites of nicotine - trans-3'-hydroxycotinine/cotinine. The rate of nicotine metabolism has important clinical implications for the likelihood of successful quitting with nicotine replacement therapy (NRT). We conducted a study to measure NMR among Polish smokers. In a cross-sectional study of 180 daily cigarette smokers (42% men; average age 34.6±13.0), we collected spot urine samples and measured trans-3'-hydroxycotinine (3-HC) and cotinine levels with LC-MS/MS method. We calculated NMR (molar ratio) and analyzed variations in NMR among groups of smokers. In the whole study group, an average NMR was 4.8 (IQR 3.4-7.3). The group of women below 51 years had significantly greater NMR compared to the rest of the population (6.4; IQR 4.1-8.8 vs. 4.3; IQR 2.8-6.4). No differences were found among group ages of male smokers. This is a first study to describe variations in nicotine metabolism among Polish smokers. Our findings indicate that young women metabolize nicotine faster than the rest of population. This finding is consistent with the known effects of estrogen to induce CYP2A6 activity. Young women may require higher doses of NRT or non-nicotine medications for most effective smoking cessation treatment. Copyright © 2017 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  3. Plasma electrolytic polishing of metalized carbon fibers

    Directory of Open Access Journals (Sweden)

    Falko Böttger-Hiller

    2016-02-01

    Full Text Available Efficient lightweight structures require intelligent materials that meet versatile functions. Especially, carbon-fiber-reinforced polymers (CFRPs are gaining relevance. Their increasing use aims at reducing energy consumption in many applications. CFRPs are generally very light in weight, while at the same time being extremely stiff and strong (specific strength: CFRPs: 1.3 Nm kg–1, steel: 0.27 Nm kg–1; specific stiffness: CFRPs: 100 Nm kg–1, steel: 25 Nm kg–1. To increase performance and especially functionality of CFRPs, the integration of microelectronic components into CFRP parts is aspired. The functionalization by sensors, actuators and electronics can enable a high lightweight factor and a new level of failure-safety. The integration of microelectronic components for this purpose requires a working procedure to provide electrical contacts for a reliable connection to energy supply and data interfaces. To overcome this challenge, metalized carbon fibers are used. Metalized fibers are, similar to the usual reinforcing fibers, able to be soldered and therefore easy to incorporate into CFRPs. Unfortunately, metalized fibers have to be pre-treated by flux-agents. Until now, there is no flux which is suitable for mass production without destroying the polymer of the CFRP. The process of plasma electrolytic polishing (PeP could be an option, but is so far not available for copper. Thus, in this study, plasma electrolytic polishing is transferred to copper and its alloys. To achieve this, electrolytic parameters as well as the electrical setup are adapted. It can be observed that the gloss and roughness can be adjusted by means of this procedure. Finally, plasma electrolytic polishing is used to treat thin copper layers on carbon fibers.

  4. An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

    International Nuclear Information System (INIS)

    Chomicki, O. A.

    2008-01-01

    Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

  5. Terminology extraction from medical texts in Polish.

    Science.gov (United States)

    Marciniak, Małgorzata; Mykowiecka, Agnieszka

    2014-01-01

    Hospital documents contain free text describing the most important facts relating to patients and their illnesses. These documents are written in specific language containing medical terminology related to hospital treatment. Their automatic processing can help in verifying the consistency of hospital documentation and obtaining statistical data. To perform this task we need information on the phrases we are looking for. At the moment, clinical Polish resources are sparse. The existing terminologies, such as Polish Medical Subject Headings (MeSH), do not provide sufficient coverage for clinical tasks. It would be helpful therefore if it were possible to automatically prepare, on the basis of a data sample, an initial set of terms which, after manual verification, could be used for the purpose of information extraction. Using a combination of linguistic and statistical methods for processing over 1200 children hospital discharge records, we obtained a list of single and multiword terms used in hospital discharge documents written in Polish. The phrases are ordered according to their presumed importance in domain texts measured by the frequency of use of a phrase and the variety of its contexts. The evaluation showed that the automatically identified phrases cover about 84% of terms in domain texts. At the top of the ranked list, only 4% out of 400 terms were incorrect while out of the final 200, 20% of expressions were either not domain related or syntactically incorrect. We also observed that 70% of the obtained terms are not included in the Polish MeSH. Automatic terminology extraction can give results which are of a quality high enough to be taken as a starting point for building domain related terminological dictionaries or ontologies. This approach can be useful for preparing terminological resources for very specific subdomains for which no relevant terminologies already exist. The evaluation performed showed that none of the tested ranking procedures were

  6. As prime minister during the Fukushima crisis; Als Premierminister waehrend der Fukushima-Krise

    Energy Technology Data Exchange (ETDEWEB)

    Kan, Naoto

    2015-07-01

    Naoto Kan was the acting Japanese Prime Minister during the Tohoku earthquake and the resulting Fukushima reactor accident. After demission in September 2011 he decided to document the facts according to his knowledge and the memorized thoughts during the course of the accident, his decision making and his own emotions. The first chapter covers the daily documentation until March 19th, the second chapter deals with nuclear power phaseout and Kan's demission, the third chapter covers the issues nuclear power phaseout - politics - citizens.

  7. Visit of Lord Sainsbury of Turville, Minister for Science, United Kingdom

    CERN Multimedia

    Laurent Guiraud

    1999-01-01

    Photo 01: Debbie Morgan explains the complexity of the ATLAS semiconductor tracker to Lord Sainsbury; Roger Cashmore (left), Director for Collider Programmes, and Shaun Roe look on. Photo 04: Lord Sainsbury (second from right) hears about preparations for the ATLAS experiment at the LHC from ATLAS spokesman Peter Jenni (right). With the Minister are CERN Director-General Prof. Luciano Maiani (left) and Roger Cashmore. Photo 07: Lord Sainsbury pictured between Prof. Luciano Maiani (left) and Peter Jenni. Photo 08: Lord Sainsbury (right) with Prof. Luciano Maiani.

  8. Declaration from the prime minister, Dominique de Villepin, about the energy policy on May 15, 2006

    International Nuclear Information System (INIS)

    2006-01-01

    While the oil barrel has exceeded the historical price of 70$, the French government has put forward two exigencies: reducing the weight of the oil bill and reinforcing France's energy independence through the development of nuclear and renewable energies and with the implementation of an energy saving policy, and sharing in an equitable way the petroleum 'weight' taking into account the situation of oil-dependent professionals. In this communication, the prime minister develops the different point of this policy, in particular the financial incentives for the development of renewable energy sources, biofuels, and public transportation systems, and the measures allowing to protect the spending power of French people. (J.S.)

  9. Taking care of the energy for tomorrow. Advice to the Minister of Economic Affairs

    International Nuclear Information System (INIS)

    2001-01-01

    The central question of the Dutch Minister of Economic Affairs to the General Energy Council (AER) is to determine the risks for Europe and the Netherlands with regard to the energy supply security in the long term and what national and European policy must be developed and implemented to reduce those risks, focusing on the different market parties and governments (national and European) and the relation between the supply security and the environment. In particular, the AER should address geopolitical aspects, fuel mix and capacity shortage in the production of electricity [nl

  10. Farmers' pensions and the Polish economic crisis.

    Science.gov (United States)

    Simanis, J G

    1983-04-01

    The Polish Government, in 1977, inaugurated a new pension program that made old-age and invalidity benefits available for the first time to most farmers in that country. The evolution and eventual failure of that program were closely intertwined with a growing national economic crisis, manifested in widespread popular unrest and culminating in emergence of the Solidarity movement. The farmers' pension program was originally presented as both a social security measure and a vehicle for improving agricultural efficiency. The economic situation was expected to benefit as farms of older owners were passed to younger, presumably more efficient, successors, with the state sometimes acting as intermediary. A further step to bind the social security concept to agricultural efficiency came through relating the pension amount to the quantity of produce the individual farmer sold to the state over a number of years. The failure of these provisions and other unpopular features of the new program was aggravated by inflation and continuing deterioration of the Polish economy.

  11. The Czechoslovak-Polish Club in Brno (1925–1939)

    Czech Academy of Sciences Publication Activity Database

    Baron, Roman

    2011-01-01

    Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

  12. Phonematic translation of Polish texts by the neural network

    International Nuclear Information System (INIS)

    Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

    1996-01-01

    Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

  13. Etymology in the Polish Academy of Sciences Great Dictionary of ...

    African Journals Online (AJOL)

    The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

  14. Polish Qualitative Sociology. Insight into the future of postdisciplinary research

    OpenAIRE

    Konecki, Krzysztof

    2014-01-01

    The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

  15. Note on the polishing of small spheres of ferrimagnetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

    1961-07-01

    This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

  16. Perspectives féministes en éthique des relations internationales

    Directory of Open Access Journals (Sweden)

    Ryoa Chung

    2008-09-01

    Full Text Available Dans le cadre de cet article, je veux démontrer la nécessité de développer et d’incorporer les perspectives féministes dans le champ de l’éthique des relations internationales à travers l’examen des contributions respectives de J. A. Tickner, C. MacKinnon, S. Ruddick et M. Nussbaum. Mon hypothèse générale consiste à arguer que la force critique des perspectives féministes en théorie politique représente non seulement une ouverture épistémologique incontournable, mais que celles-ci ouvrent la voie à des méthodes d’investigation et de conceptualisation que l’on doit explorer en vue d’enrichir les théories de justice globale d’une portée pratique plus grande. This paper aims to demonstrate the necessity of developing and incorporating feminist perspectives in the field of international ethics, through the examination of important contributions of J. A. Tickner, C. MacKinnon, S. Ruddick and M. Nussbaum. My general hypothesis argues that the critical impact of feminist perspectives in political theory consists not only in the epistemological avenue that they open, but that their methods of investigation and of conceptualization must be thoroughly explored in order to enrich theories of global justice of a greater practical scope.

  17. Autonomia e discricionariedade do Ministério Público no Brasil

    Directory of Open Access Journals (Sweden)

    Fábio Kerche

    2007-01-01

    Full Text Available Dans cet article, on examine l'autonomie, le pouvoir discrétionnaire et le large éventail d'attributions du Ministère Public au Brésil figurant dans la Constitution de 1988, afin de savoir si cet assemblage ne s'oppose pas au principe démocratique selon lequel les institutions d'État, y compris celles qui n'utilisent pas le système d'élections directes pour l'admission de leurs membres, doivent rendre compte de leurs actes devant le peuple souverain. Dans ce but, on part de la littérature néo-institutionnelle concernant la bureaucratie afin d'étudier le Ministère Public au Brésil. En conclusion, on voit que les hommes politiques se servent très peu de l'institution, ce qui est plutôt rare au Brésil ainsi que chez d'autres pays démocratiques.

  18. Spanish Minister of Science and Technology visits the LHC magnet test facility

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photos 01, 02: (left to right) M. Cerrada, CERN; Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee; G. Léon; Juan Antonio Rubio, leader of the Education and Technology Transfer division at CERN; M. Aguilar-Benitez, Spanish delegate to CERN Council; (behind) H.E. Mr Joaquin Pérez-Villanueva y Tovar, Ambassador and Permanent Representative of Spain to the United Nations in Geneva; the Minister; Manuel Delfino, leader of the Information Technology division at CERN; bodyguard; Matteo Cavalli-Sforza, ATLAS national contact physicist for Spain; Felix Rodriguez Mateos, CERN; G. Babé. Visible in the left background is one of the test benches where magnets are prepared for installation in String 2: the full-scale model of an LHC cell of the regular part of the arc. The extremity of String 2, which measures 120 m and runs the ...

  19. Chemical polishing of partially oxidized T-111 alloy

    International Nuclear Information System (INIS)

    Teaney, P.E.

    1974-01-01

    The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

  20. What Makes a Prime Minister Great?: A Leadership Trait Analysis of the effectiveness of British Prime Ministers from 1902 to 2004

    Directory of Open Access Journals (Sweden)

    Samuel R. Rohrer

    2014-10-01

    Full Text Available What role do the Leadership Trait Analysis (LTA criteria projected by a British Prime Minister (PM have on the perceived effectiveness of their time in office? In this paper, the analysis of 20th-century British PMs utilized automated at-a-distance content analysis and the LTA coding system to determine the conceptual complexity, ability to control events, and need for power scores projected by PMs. The impact these traits had on the perceived effectiveness of the totality of the PMs’ tenure in office, as measured by the 2004 MORI/University of Leeds survey, was then examined via one-tailed ordinary least squares regression. This project provides evidence that British PMs who project traits associated with the LTA measure regarding strong power motivation are significantly viewed as more effective while in office. These findings provide more than a novel historical profile of British PMs. The relationship between effective leadership and LTA traits could be utilized by political campaigns, especially given the introduction of prime ministerial debates, to portray a prime ministerial candidate as more politically effective than his/her competition.

  1. Politico-Territorial Projects concerning Bukovina and the Romanian-Polish Border in the Context of Diplomatic Negotiations during and after World War I (1914-1920

    Directory of Open Access Journals (Sweden)

    Cezar Ciorteanu

    2014-07-01

    Full Text Available The paper concisely presents the issue of the recognition of the November 15th/28th, 1918 union of Bukovina with the Romanian Kingdom by the Paris Peace Con­fe­rence (1919-1920. The efforts of the Romanian Kingdom's delegation led by Ion I. C. Bratianu, the president of the Ministers' Council, and subsequently by Alexandru Vaida Voivod were oriented towards the full recognition of Bukovina within its historical borders (reaching Ceremuş, Dniester and Colacin as it has been voted by Bukovina's General Congress that met at Chernivtsi on November 15th/28th, 1918. The achievement of Bukovina's union international recognition was also closely related to the Romanian-Polish efforts to establish a common border, a goal achieved with the support of the Allied and Associated Powers, taking into account: Romania and Poland's interests and historical rights, the geopolitical situation evolution in Eastern Europe, as well as the Great Powers' interests.

  2. Antigenic typing Polish isolates of canine parvovirus

    Energy Technology Data Exchange (ETDEWEB)

    Mizak, B. [National Veterinary Research Institute, Pulawy (Poland); Plucienniczak, A. [Polish Academy ofd Sciences. Microbiology and Virology Center, Lodz (Poland)

    1995-12-31

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs.

  3. Food patterns of Polish older people

    DEFF Research Database (Denmark)

    Wadolowska, L.; Danowska-Oziewicz, M.; Niedzwiedzka, E.

    2006-01-01

    Food patterns of Polish older people were separated and described. The research included 422 people aged 65+ years, living in 5 geographical locations. Participants of the study were selected in quota sampling. Criteria for recruitment included sex, age (65-^74 or 75+ years) and family status...... (living alone or living with other people). Respondents were asked questions about consumption of 55 food products. The factor analysis allowed for separating 21 food patterns. They included from 1 to 3 groups of products, intake of which was mutually dependant. Big number of separated food patterns...... and small number of products fonning joint food patterns speak in advocacy of relatively small reciprocal relationship between different food items consumed by the seniors in Poland....

  4. Attitudes of Polish Consumers Toward Experiential Marketing

    Directory of Open Access Journals (Sweden)

    Monika Skorek

    2017-01-01

    Full Text Available Purpose: The experience economy is a concept that can be defned as a new way of perceiving the market offer of an enterprise, focusing on the customer experience. Enterprises, both in the production and service industries, are becoming similar to one another on a massive scale, which makes it increasingly diffcult to stand out. The response to this can be to offer the consumer an unforgettable experience related to a product or service provided by a company. Methodology: This study analysed the results of qualitative research on the attitudes and opinions of Polish consumers on experience marketing. Results/fndings: The results showed that participants of the study were prepared to transition from the economy based on products or services to an economy based on experiences at a moderate level. They declared a willingness to participate in experiences offered by companies but at the same time focus on the cost and utility of them

  5. Antigenic typing Polish isolates of canine parvovirus

    International Nuclear Information System (INIS)

    Mizak, B.; Plucienniczak, A.

    1995-01-01

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs

  6. Popularity of marijuana among Polish students

    Directory of Open Access Journals (Sweden)

    Michał Pająk

    2017-09-01

    Full Text Available Introduction and the aim: Marijuana is the most commonly used drug in the world (excluding alcohol and tobacco. According to the literature about 16% of Poles at the age of 16 to 64 years old, at least once have used cannabis. The aim of study was to estimate the popularity of marijuana among students of Polish universities. We also asked questions about respondents’ attitude towards marijuana and opinions about its validation. Material and methods: The study was conducted in 2017 on 132 individuals – 60 men and 72 women. The results were analyzed in STATISTICA 10 at p<0.05. Results:Out of interviewees, 63.6% of them, at least once in their lives, have used marijuana. This is a percentage of up to four times greater than that one given in the literature for the general population. Even 80% of men and 50% of women have tried marijuana at least once in their lives. Students of Catholic University of Lublin reach for marijuana significantly more often than students of Medical University of Lublin. The majority of respondents (53% treats marijuana as a "soft" drug, though up 67.4% believe that it has the addictive potential. More than a half of respondents (56.8% stands for liberalization of rules relevant to marijuana in Poland. Vast majority (70% of respondents believes that marijuana is easily available in Poland. Conclusions: Marijuana is a drug popular among students. The criminalization of drug use in Poland is not effective for the prevention of its use, the majority of respondents believes that marijuana is easily available in Poland. Considering the negative health and social consequences of the current state, it is worth wondering about making changes in the education system and Polish drug law.

  7. Droughts in historical times in Polish territory

    Science.gov (United States)

    Limanowka, Danuta; Cebulak, Elzbieta; Pyrc, Robert; Doktor, Radoslaw

    2015-04-01

    Climate change is one of the key environmental, social and economical issues, and it is also followed by political consequences. Impact of climate conditions on countries' economy is increasingly recognized, and a lot of attention is given, both in the global scale and by the individual national governments. In years 2008-2010, at the Poland -Institute of Meteorology and Water Management-National Research Institute was realized the KLIMAT Project on Impact of climate change on environment, economy and society (changes, effects and methods of reducing them, conclusions for science, engineering practice and economic planning) No. POIG01-03-01-14-011/08. The project was financed by the European Union and Polish state budget in frame of Innovative Economy Operational Programme. A very wide range of research was carried out in the different thematic areas. One of them was "Natural disasters and internal safety of the country (civil and economical)." The problem of drought in Poland was developed in terms of meteorology and hydrology. "Proxy" Data Descriptions very often inform about dry years and seasons, hot periods without precipitation. Analysis of historical material allowed to extract the years that have experienced prolonged periods of high temperatures and rainfall shortages. Weather phenomenon defined as drought belongs to extreme events. This information was very helpful in the process of indexing and thus to restore the course and intensity of climatic elements in the past. The analysis covered the period from year 1000 to modern times. Due to the limited information from the period of 1000-1500 the authors focused primarily on the period from 1500 to 2010. Analysis of the collected material has allowed the development of a highly precise temporal structure of the possible occurrence of dry periods to Polish territory.

  8. Gender Biases and Linguistic Sexism in Political Communication: A Comparison of Press News About Men and Women Italian Ministers

    Directory of Open Access Journals (Sweden)

    Gilda Sensales

    2017-12-01

    Full Text Available This research on press communication uses a synchronic perspective concerning eighteen ministers, balanced by gender, in the Renzi government (in 2014, as well as a diachronic perspective concerning women ministers from five governments (from 2006-2014. The governments in 2014 and of 2013 were predominantly center-left, with the participation of center and center-right parties, whereas the previous governments had technical-professional rather than political ministers (in 2011, center-right (in 2008, and center-left (in 2006 ministers. In the synchronic analysis we explored the different ways in which the ministers are named, the relative presence of sexist/non-sexist, agentive/non-agentive, and abstract/concrete language in which they were presented. The first analysis comprised 332 headlines and the second comprised 1,356 headlines; we conducted a numerical and lexicographical analysis on the headlines. The results showed: more coverage for men than for women; gender biases in naming ministers involving a greater number of citations of women with both first and last name, whereas there were a greater number of citations of men with their first name only; the prevalence of sexist language that uses the generic masculine rather than the specific feminine (that is, the grammatical feminization of a typically masculine form in representing women; an increment of the specific feminine in representing women in the last three governments over the previous two; no gender differences in the use of “I” and “We” as markers of agency; more quotations of direct discourse for women than for men; language slightly more abstract than concrete, for both men and women; more positive adjectives for women, and more negative adjectives for men. The results are discussed in relation to the international literature and to the Italian cultural-political context.

  9. New perspectives in hydrodynamic radial polishing techniques for optical surfaces

    Science.gov (United States)

    Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

    2004-09-01

    In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

  10. Pouvoir et sexualité. Le discours féministe sur la prostitution en France (1968-1986.

    Directory of Open Access Journals (Sweden)

    Damien Simonin

    2010-07-01

    Full Text Available Cette recherche porte sur les discours sur la prostitution dans la presse féministe, entre 1968 et 1986 en France. Durant cette période, le mouvement féministe est composé de courants conflictuels (courants réformistes et révolutionnaires, différentialistes et universalistes et il porte des discours hétérogènes (informations sur la prostitution, analyses théoriques et politiques, témoignages de prostituées. Pourtant, ces discours s'accordent sur la revendication d'une libération des rapport...

  11. Reel-to-reel substrate tape polishing system

    Energy Technology Data Exchange (ETDEWEB)

    Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

    2005-06-21

    Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

  12. Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

    Directory of Open Access Journals (Sweden)

    X. Wei

    2012-01-01

    Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

  13. Microscopic machining mechanism of polishing based on vibrations of liquid

    International Nuclear Information System (INIS)

    Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

    2007-01-01

    A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

  14. Presentation of the verbs in Bulgarian-Polish electronic dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2014-09-01

    Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

  15. "Agricultural budget" and the competitiveness of the Polish agriculture

    OpenAIRE

    Lenkiewicz, Stanisław; Rokicki, Bartłomiej

    2014-01-01

    The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

  16. The Bavarian State Minister of Economic Affairs and Transportation: Answers in energy policy

    International Nuclear Information System (INIS)

    For a detailed discussion in parliament of the problems of energy supply in Bavaria, the committees for economic affairs and transportation and for regional development and environmental problems reported on the various aspects of power supply in Bavaria in a hearing at the Bavarian Land parliament on June 20-22, 1977. The answers of the ministers to questions raised in parliament are compiled in this documentation which of course, cannot give a full picture of the very detailed material. Part 1 discusses all major problems of energy policy in Bavaria with sections on energy consumption, economic growth, and energy supply from all available energy sources. (UA) 891 UA/UA 892 MKO [de

  17. Energy and Spatial Planning. Advice to the Minister of Economic Affairs, 29 June 2000

    International Nuclear Information System (INIS)

    2000-08-01

    The Dutch Minister of Economic Affairs requested the General Energy Council (AER, abbreviated in Dutch) to advice on spatial planning aspects of energy in the Netherlands, focusing on (1) the spatial facilities c.q. measures to be taken by the Dutch government to guarantee an adequate energy production and energy distribution in the long term; and (2) how to realize the targets for and stimulate the use of renewable energy within the spatial planning process. The vision of the AER is placed against the background of societal actuality of democratization and support of the Dutch population. For that reason in the appendix an overview is given of causes and possible administrative methods of the so-called NIMBY (Not In My Back Yard) phenomenon. 53 refs

  18. Not a “real” common travel area: Pachero v Minister for Justice and Equality

    DEFF Research Database (Denmark)

    Butler, Graham

    2015-01-01

    of the Immigration Act 2004, which determined their legal status within the State after appearing to innocently fall foul of the archaic and somewhat indistinguishable features of Irish immigration law. This outcome stemmed from the Common Travel Area and the open land borders between the United Kingdom and Ireland....... Secondly, there is the substance of the Common Travel Area that the judge in his judgment provides one of the clearest understandings of the relevant public policy since the decision in Kweder v Minister for Justice. This case note at the outset contextualises the Common Travel Area, setting out how...... it came about, and why it is still in use 90 years after its creation. The facts of Pachero are then discussed, wherein the applicants had apparently misunderstood the Common Travel Area. Next, the judgment of Hogan J. is examined. Finally, some wider analysis and commentary is provided on the current...

  19. Federal cabinet minister from N.B joins opponents to LNG terminals

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.

    2005-08-25

    This article addressed the debate regarding the United States' proposal to construct liquefied natural gas (LNG) facilities on a pristine bay between New Brunswick and Maine. Two LNG projects are currently being promoted for Passamaquoddy Bay, and 2 more proposals are expected to be announced in the near future. However, the proponents have not yet submitted any formal applications to the Canadian government. A federal cabinet minister from New Brunswick has joined the growing opposition to the proposed project, claiming that the location on the Maine side of Passamaquoddy Bay, a large inlet off the Bay of Fundy, poses too many risks to the habitat of several endangered or at-risk species, including the North Atlantic Right Whale. The proposed sites in Maine are directly across a narrow bay where tourism and fishing are prime industries in New Brunswick. The cabinet minister claims that with over 2,000 miles of coastline on the eastern seaboard, another location can be found for the LNG facilities that would not present navigational difficulties. The Canadian federal government has the jurisdiction to stop the project by not allowing the supertankers to cross Canadian waters to enter the Bay. The waters are known for their treacherous navigation. The premier of New Brunswick has also stepped in to ensure that the governor of Maine is made aware of Canada's opposition to the project. Officials with Downeast LNG and Quoddy Bay LLC claim there would not be any safety or environmental risks associated with the LNG project.

  20. Domestic fuel oil spill prevention committee : report to Ministers of Government Services and Lands and Environment

    International Nuclear Information System (INIS)

    2001-07-01

    The number of reported spills from domestic fuel oil systems increased dramatically in Newfoundland, which prompted the Minister of Government Services and Lands to arrange a meeting with representatives from consumers, the fuel service industry and the insurance industry to ensure proper measures were taken for the prevention of domestic fuel spills. A joint committee consisting of industry and government representatives was formed as a result of this meeting, to examine and investigate the situation and report to the Minister of Government Services and Lands. Advice on means to address the problems associated with domestic fuel oil spills was provided, as well as mechanisms to minimize such occurrences in the future. Also included in the review were small commercial storage tanks units of no more than 2500 litres, as small commercial establishments often have heating systems similar in size to residential units. Gradual leaks that go undetected for years often occur, as do the catastrophic rupture of the fuel storage tank itself. Rusting and exterior tubing are some of the causes of spills. The contamination of surrounding soil and/or groundwater can occur as a result of the spills, and fumes can enter residences through foundation walls of the sewer system. Condensation within the tank can lead to corrosion of the fuel tanks. A number of recommendations were made in the report, such as the establishment of regulations pertaining to the construction, installation, servicing and fueling of domestic and small commercial fuel systems, the proper enforcement of the regulations, a public education campaign, an emergency response capability, tax incentives to consumers for expenditures associated with the upgrading or replacement of inadequate systems, support funding, the establishment of an emergency respond fund, and environmental cleanup requirements. figs

  1. Scaling properties of Polish rain series

    Science.gov (United States)

    Licznar, P.

    2009-04-01

    Scaling properties as well as multifractal nature of precipitation time series have not been studied for local Polish conditions until recently due to lack of long series of high-resolution data. The first Polish study of precipitation time series scaling phenomena was made on the base of pluviograph data from the Wroclaw University of Environmental and Life Sciences meteorological station located at the south-western part of the country. The 38 annual rainfall records from years 1962-2004 were converted into digital format and transformed into a standard format of 5-minute time series. The scaling properties and multifractal character of this material were studied by means of several different techniques: power spectral density analysis, functional box-counting, probability distribution/multiple scaling and trace moment methods. The result proved the general scaling character of time series at the range of time scales ranging form 5 minutes up to at least 24 hours. At the same time some characteristic breaks at scaling behavior were recognized. It is believed that the breaks were artificial and arising from the pluviograph rain gauge measuring precision limitations. Especially strong limitations at the precision of low-intensity precipitations recording by pluviograph rain gauge were found to be the main reason for artificial break at energy spectra, as was reported by other authors before. The analysis of co-dimension and moments scaling functions showed the signs of the first-order multifractal phase transition. Such behavior is typical for dressed multifractal processes that are observed by spatial or temporal averaging on scales larger than the inner-scale of those processes. The fractal dimension of rainfall process support derived from codimension and moments scaling functions geometry analysis was found to be 0.45. The same fractal dimension estimated by means of the functional box-counting method was equal to 0.58. At the final part of the study

  2. Polish electoral geography and its methods

    Directory of Open Access Journals (Sweden)

    Zbigniew Rykiel

    2011-01-01

    Full Text Available Differences in the understanding of electoral geography between social sciences are discussed in the article. Main fields and spatial scales of Polish electoral geography are identified. Main methods of multidimensional statistics are discussed. A necessity of a proper choice, based on theories of voting behaviour, of explaning variables to statistical models are emphasised. Regression analysis indicates only a formal usefulness in electoral geography, for quantitative relationships between variables in the model can be evidenced, which may be meaningless not only essentially, but even statistically. The application of canonical analysis in electoral geography brought a methodological turning-point to the statistical approach. This method allowed to combine: (1 the foundation of the selection of input variables on theories of voting behaviour; (2 the analysis of dependence of the electoral results on socio-economic characteristics of areas; (3 an identification of electoral options; (4 a quantification of the role of the historical heritage in the contemporary voting behaviour; and (5 the analysis of the stability of the electoral space. A well grounded opinion was weakened about the general competitiveness of right- and left-wing parties in Poland’s political space. Parties with similar rather than different programmes compete in given areas. It was indicated that elections have only formal influence on the structure of Parliament while the electoral system is decisive. Electoral, including territorial, manipulations also play their part. The empirical analysis indicated that Poland’s political space is polarised between the right-wing-oriented areas of the south-eastern half of the country and the left-wing-oriented areas of the north-western half. The political competition between the left and the right operates merely on the national scale, while it is not reflected territorially.The quantification of the influence of the nineteenth

  3. DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

    Science.gov (United States)

    The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

  4. The resettlement of Polish refugees after the second world war

    Directory of Open Access Journals (Sweden)

    Agata Blaszczyk

    2017-02-01

    Full Text Available The passing of the Polish Resettlement Act and the creation of the different agencies related to it undoubtedly represented an unprecedented response to the challenge of mass migration in the UK.

  5. Comparative study of performance of shoe polishes formulated from ...

    African Journals Online (AJOL)

    GARZALI

    1Department of Pure and Industrial Chemistry, Bayero University, Kano. 2College of Science ... carbon black pigment. Polyethylene polish like the one formulated using carbon black pigment was ... into fine black powder. Purification of Wax.

  6. Polish Defense Policy in the Context of National Security Strategy

    National Research Council Canada - National Science Library

    Bieniek, Piotr S

    2006-01-01

    ...) and the North Atlantic Treaty Organization (NATO). Polish security policy and strategy is shaped by its geographical location, which places Poland in NATO's main strategic area opposite the Russian Federation and Belarus...

  7. Employability management practices in the Polish ICT sector

    NARCIS (Netherlands)

    Marzec, I.; van der Heijden, Beatrice; Scholarios, D.; van der Schoot, E.; Jedrzejowicz, P.; Bozionelos, N.; Epitropaki, O.; Knauth, P.; Mikkelsen, A.; van der Heijde, C.M.

    2009-01-01

    This article examines current career thinking and employability management practices within the Polish Information and Communication Technology (ICT) sector. The aim of this contribution is to identify career management problems and to determine obstacles for implementing employability management

  8. Super Polishing of Aluminum 6061-T6 Mirrors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — An innovative 2D super-polishing process for Aluminum 6061-T6 planar mirrors which removes diamond point turning (DPT) grooves and attains rms surface finishes below...

  9. Production of rare earth polishing powders in Russia

    International Nuclear Information System (INIS)

    Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

    1998-01-01

    Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

  10. Research on high-efficiency polishing technology of photomask substrate

    Science.gov (United States)

    Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

    2018-03-01

    A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

  11. Laser polishing of 3D printed mesoscale components

    International Nuclear Information System (INIS)

    Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

    2017-01-01

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

  12. Laser polishing of 3D printed mesoscale components

    Energy Technology Data Exchange (ETDEWEB)

    Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

    2017-05-31

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

  13. Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

    OpenAIRE

    Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

    2016-01-01

    Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

  14. Borel hierarchies in infinite products of Polish spaces

    Indian Academy of Sciences (India)

    with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

  15. Polish Standard of the Technical Safety of Transmission Gas Pipelines

    International Nuclear Information System (INIS)

    Tkacz, A.J.

    2006-01-01

    The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

  16. IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

    OpenAIRE

    Cukras-Stelągowska, Joanna

    2015-01-01

    In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

  17. Islam Hadhari: An Ideological Discourse Analysis of Selected Speeches by UMNO President and Malaysia Prime Minister Abdullah Ahmad Badawi

    Science.gov (United States)

    Yahaya, Azlan R.

    2012-01-01

    This research study explored the problem the Malay identity and society in the discourse of Malay politics. The purpose of this study was to understand how the discourse of Islam "Hadhari" as spoken by prime minister and UMNO president Abdullah Ahmad Badawi in the years 2004-2008 demonstrated the hegemony of his administration and party.…

  18. Decree No 81-723 of 28 July 1981 concerning the competence of the Minister of Research and Technology

    International Nuclear Information System (INIS)

    1981-01-01

    This Decree, which determines the competence of the Minister of Research and Technology, provides that the latter prepares the Governments' decisions on the distribution of funds for technological R and D for civilian uses. Therefore he is responsible for allocating funds for such activities to the Atomic Energy Commission (CEA). (NEA) [fr

  19. Mosibudi Mangena, South Africa's Minister for Science and Technology, was welcomed by CERN's Chief Scientific Officer, Jos Engelen

    CERN Document Server

    Patrice Loïez

    2005-01-01

    Pictures 5 to 11 : He spent time at the ALICE experiment, in which physicists from the University of Cape Town participate. The ALICE spokesperson, Jürgen Schukraft accompanies the minister and Glaudine Mtshali, ambassador for South Africa to the UN in Geneva.

  20. Ms Naledi G. Pandor Minister of Science and Technology Republic of South Africa Wednesday 22nd June 2011

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    During a visit to CERN on 22 June, Naledi G Pandor, minister of science and technology for the Republic of South Africa, looked round the ATLAS visitor centre with Peter Jenni, former spokesperson for the ATLAS experiment. She also toured the LHC superconducting magnet test hall and the ALICE visitor centre.

  1. The Belgian Minister of Economy, Energy, Foreign Trade and Science Policy, Marc Verwilghen, with CERN's Director-General, Robert Aymar.

    CERN Multimedia

    Michel Blanc

    2005-01-01

    Marc Verwilghen, Belgian Minister of Economy, Energy, Foreign Trade and Science Policy, came to CERN on 8 April 2005, where he visited the CMS assembly hall and underground cavern, as well as the hall where the LHC superconducting magnets are being tested.

  2. Dr Liu Yanhua, Deputy Minister of Science and Technology, Ministry of Science and Technology, People's Republic of China

    CERN Multimedia

    Patrice Loiez

    2004-01-01

    China and CERN renew co-operation agreement for a further five years. During a visit to CERN on 17 February, Liu Yanhua, the vice-minister of science and technology of the People's Republic of China, signed a new co-operation agreement with the laboratory.

  3. H.E. Professor Wang Liheng, Minister of Aviation of the People's Republic of China, President, China Aerospace Science & Technology Corporation

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    H. E. Professor Wang Liheng, Minister of Aviation, and President, China Aerospace Science & Technology Corporation, People's Republic of China (2nd from left) with (from left to right) Professor Hans Hofer, Professor Roger Cashmore, Research Director for Collider Programmes, Professor Samuel C. C. Ting, CERN and Professor Lei Gang, Secretary to the Minister, September 2001.

  4. The Armenian minister for trade and economic development Karen Chshmaritian, visited CERN on 4 July and toured the ATLAS experimental cavern and assembly hall

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Armenian Minister for Trade and Economic Development, K. Chshmaritian third from right with from left to right : Aram Kotzinian, JINR, Dubna; Dr Marzio Nessi, ATLAS, Zohrad Mnatsakanian, Ambassador at the Permanent Mission of the Republic of Armenia in Geneva, Karen Chshmaritian, Armenian Minister for Trade and Economic Development, Alexey Sissakian, Vice-Director of JINR and Peter Jenni, ATLAS Spokesperson.

  5. Factors influencing the surface quality of polished tool steels

    International Nuclear Information System (INIS)

    Rebeggiani, S; Rosén, B-G

    2014-01-01

    Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

  6. Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

    Science.gov (United States)

    Kumaran, S. Chidambara; Shunmugam, M. S.

    2017-10-01

    Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

  7. Polish Adaptation of Wrist Evaluation Questionnaires.

    Science.gov (United States)

    Czarnecki, Piotr; Wawrzyniak-Bielęda, Anna; Romanowski, Leszek

    2015-01-01

    Questionnaires evaluating hand and wrist function are a very useful tool allowing for objective and systematic recording of symptoms reported by the patients. Most questionnaires generally accepted in clinical practice are available in English and need to be appropriately adapted in translation and undergo subsequent validation before they can be used in another culture and language. The process of translation of the questionnaires was based on the generally accepted guidelines of the International Quality of Life Assessment Project (IQOLA). First, the questionnaires were translated from English into Polish by two independent translators. Then, a joint version of the translation was prepared collectively and translated back into English. Each stage was followed by a written report. The translated questionnaires were then evaluated by a group of patients. We selected 31 patients with wrist problems and asked them to complete the PRWE, Mayo, Michigan and DASH questionnaires twice at intervals of 3-10 days. The results were submitted for statistical analysis. We found a statistically significant (pquestionnaires. A comparison of the PRWE and Mayo questionnaires with the DASH questionnaire also showed a statistically significant correlation (pquestionnaires was successful and that the questionnaires may be used in clinical practice.

  8. Automated visual inspection for polished stone manufacture

    Science.gov (United States)

    Smith, Melvyn L.; Smith, Lyndon N.

    2003-05-01

    Increased globalisation of the ornamental stone market has lead to increased competition and more rigorous product quality requirements. As such, there are strong motivators to introduce new, more effective, inspection technologies that will help enable stone processors to reduce costs, improve quality and improve productivity. Natural stone surfaces may contain a mixture of complex two-dimensional (2D) patterns and three-dimensional (3D) features. The challenge in terms of automated inspection is to develop systems able to reliably identify 3D topographic defects, either naturally occurring or resulting from polishing, in the presence of concomitant complex 2D stochastic colour patterns. The resulting real-time analysis of the defects may be used in adaptive process control, in order to avoid the wasteful production of defective product. An innovative approach, using structured light and based upon an adaptation of the photometric stereo method, has been pioneered and developed at UWE to isolate and characterize mixed 2D and 3D surface features. The method is able to undertake tasks considered beyond the capabilities of existing surface inspection techniques. The approach has been successfully applied to real stone samples, and a selection of experimental results is presented.

  9. Personality of Polish gay men and women

    Directory of Open Access Journals (Sweden)

    Marcin Kwiatkowski

    2015-12-01

    Full Text Available Background Sexuality is a part of one’s identity and personality that is shaped under the influence of biological and environmental factors and interactions with society. The results of research conducted so far and concerning the personality traits of gay men and women are not consistent, and only a small number of them concern the Polish population. Hence the objective of the present research was to provide personality profiles of men and women with different sexual orientations. Participants and procedure The participants (N = 346 included 84 gay women, 82 gay men, 95 heterosexual women and 85 heterosexual men. The following measures were used: a survey developed by the author, the Kinsey Scale, the EPQ-R (Eysenck Personality Questionnaire Revised adapted by Brzozowski and Drwal (1995, and the Sixteen-factor Personality Questionnaire of Cattell adapted by Nowakowska (1970. Results The results support the hypothesis that gay women and heterosexual men share similar personality traits, while gay men have more diverse traits, similar to the traits typical for heterosexual women and men. In particular, personalities of gay men are described by such traits as progressive attitude, independence, or willingness to take risks, which means traits linked to factor Q1. The highest values of that factor are observable in the case of gay men, as compared to gay women, and also in comparison with heterosexual men and women. Conclusions Sexual orientation is responsible for differences in personality traits of the studied group to a greater extent than their biological sex.

  10. Thermodynamical motivation of the Polish energy policy

    Directory of Open Access Journals (Sweden)

    Ziębik Andrzej

    2013-02-01

    Full Text Available Basing on the first and second law of thermodynamics the fundamental trends in the Polish energy policy are analysed, including the aspects of environmental protection. The thermodynamical improvement of real processes (reduction of exergy losses is the main way leading to an improvement of the effectivity of energy consumption. If the exergy loss is economically not justified, we have to do with an error from the viewpoint of the second law analysis. The paper contains a thermodynamical analysis of the ratio of final and primary energy, as well as the analysis of the thermo-ecological cost and index of sustainable development concerning primary energy. Analyses of thermo-ecological costs concerning electricity and centralized heat production have been also carried out. The effect of increasing the share of high-efficiency cogeneration has been analyzed, too. Attention has been paid to an improved efficiency of the transmission and distribution of electricity, which is of special importance from the viewpoint of the second law analysis. The improvement of the energy effectivity in industry was analyzed on the example of physical recuperation, being of special importance from the point of view of exergy analysis.

  11. Polish university as an (unattractive potential employer

    Directory of Open Access Journals (Sweden)

    Baruk, Agnieszka Izabela

    2017-12-01

    Full Text Available The article presents issues associated with the reasons for the fact that young potential employees are not interested in starting work at Polish universities. The article is theoretical-empirical in character. The theoretical part highlights the importance of a situation in which an entity is regarded as an attractive employer, which allows attracting the best employees. Particular attention is paid to the fact that a university needs to build its image as an employer, which results from its characteristics. The article strives to achieve three research goals, among others, identifying the reasons why respondents are not interested in starting work at a university and arranging these reasons hierarchically. Two research hypotheses were subject to preliminary verification: H1 – the main reason for the unwillingness to start work at a university are financial aspects; H2 – the main reason for the unwillingness to start work at a university are the aspects of prestige. The data collected in course of primary research were subject to quantitative analysis based on the method of average assessment analysis and the method of factor analysis. Their results show that the respondents were not interested in work at a university mainly because they wanted to test the knowledge and skills acquired during studies in other branches. At the same time, the aspects of finances and prestige didn’t play a major role. Thus, in case of the surveyed sample of respondents both research hypotheses have to be recognized as untrue.

  12. Mercury emissions from polish pulverized coalfired boiler

    Directory of Open Access Journals (Sweden)

    Wichliński Michał

    2017-01-01

    Full Text Available The current paper presents the research results carried out at one of Polish power plants at a pulverized hard coal-fired 225 MW unit. The research was carried out at full load of the boiler (100% MCR and focused on analysis of mercury content in the input fuel and limestone sorbent for wet flue gas desulfurization (FGD system, as well as investigation of mercury content in the combustion products, i.e. fly ash, slag, FGD product (gypsum and FGD effluents (waste. Within the framework of the present study the concentration of mercury vapor in the exhaust gas was also investigated. The analysis was performed using Lumex RA-915+ spectrometer with an attachment (RP-91C. The measurements were carried out at three locations, i.e. before the electrostatic precipitator (ESP, downstream the ESP, and downstream the wet FGD plant. Design of the measurement system allowed to determine both forms of mercury in the flue gas (Hg0 and Hg2+ at all measurement locations.Based on the measurement results the balance of mercury for a pulverized coal (PC boiler was calculated and the amount of mercury was assessed both in the input solids (fuel and sorbent, as well as the gaseous and solids products (flue gas, slag, ash, gypsum and FGD waste.

  13. Marketing Globalisation – Polish Market Experience

    Directory of Open Access Journals (Sweden)

    Robert Nowacki

    2007-09-01

    Full Text Available The beginning of the 21st century has been yielded with an acceleration of transformations occurring in economies of the whole world. These changes relate to all the areas of economic life functioning. The most important manifestation thereof is a reinforcement of competitive phenomena. Among the most important reasons for such a state of affairs, there is mentioned globalisation. The course of its processes forces the organisation operating in the market to undertake adaptive actions. One of them is reorientation of marketing activities. The need to modify the previous marketing concepts results, first of all, from far reaching alterations in the sphere of consumption, just triggered by globalisationís impact. These trends are noticed in all the markets, also in the Polish one. The foreign enterprises operating in it more and more often use the concept of global marketing. This makes us to have reflection on what is the real effectiveness of such actions and what are the possibilities to form oneís competitive position owing to that. The article constitutes an attempt to provide answers to these questions.

  14. Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

    Science.gov (United States)

    Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

    2017-09-01

    Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

    Directory of Open Access Journals (Sweden)

    Agnieszka Imbierowicz

    2012-06-01

    Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

  16. Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

    Science.gov (United States)

    Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

    2010-01-01

    The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

  17. Germanium content in Polish hard coals

    Directory of Open Access Journals (Sweden)

    Makowska Dorota

    2016-01-01

    Full Text Available Due to the policy of the European Union, it is necessary to search for new sources of scarce raw materials. One of these materials is germanium, listed as a critical element. This semi-metal is widely used in the electronics industry, for example in the production of semiconductors, fibre optics and solar cells. Coal and fly ash from its combustion and gasification for a long time have been considered as a potential source of many critical elements, particularly germanium. The paper presents the results of germanium content determination in the Polish hard coal. 23 coal samples of various coal ranks were analysed. The samples were collected from 15 mines of the Upper Silesian Coal Basin and from one mine of the Lublin Coal Basin. The determination of germanium content was performed with the use of Atomic Absorption Spectrometry with Electrothermal Atomization (GFAAS. The investigation showed that germanium content in the analysed samples was at least twice lower than the average content of this element in the hard coals analysed so far and was in the range of 0.08 ÷ 1.28 mg/kg. Moreover, the content of Ge in the ashes from the studied coals does not exceed 15 mg/kg, which is lower than the average value of Ge content in the coal ashes. The highest content of this element characterizes coals of the Lublin Coal Basin and young coals type 31 from the Vistula region. The results indicate a low utility of the analysed coal ashes as a source of the recovery of germanium. On the basis of the analyses, the lack of the relationship between the content of the element and the ash content in the tested coals was noted. For coals of the Upper Silesian Coal Basin, the relationship between the content of germanium in the ashes and the depth of the seam was observed.

  18. The study of optimization on process parameters of high-accuracy computerized numerical control polishing

    Science.gov (United States)

    Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

    2017-09-01

    Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

  19. 2004 federal budget : pre-budget submission to the Minister of Finance

    International Nuclear Information System (INIS)

    2003-09-01

    The Canadian Electricity Association represents 95 per cent of all generation, transmission, distribution and retail services provided to customers across Canada. For the past 6 years, it has provided technical analysis to the federal government on how tax changes could improve the environmental performance and competitiveness of an industry that has undergone massive restructuring, including unbundling and increased competition. The massive power outage in August 2003 heightened industry concerns over aging infrastructures and the need for major investment. This pre-budget submission to the Minister of Finance recommends improvements to the capital cost allowance (CCA) tax rates and increasing the CCA rate for used equipment. The Canadian Electricity Association argues that these improvements are fundamental to the ability of the industry to enhance its environmental performance and reduce greenhouse gas emissions. It was also suggested that new investment in supply, transmission and distribution should be encouraged to avoid potential shortfalls in supply, future peaking shortages and price spikes due to system constraints. The proposed changes would align CCA rates with the electricity assets while encouraging investment in the electricity sector. It was emphasized that tax changes are the pivotal signal to encourage investment in upgrading electricity assets. 3 tabs

  20. The Prime Minister and the platypus: A paradox goes to war.

    Science.gov (United States)

    Lawrence, Natalie

    2012-03-01

    In February 1943, in the midst of the Second World War, Prime Minister Winston Churchill demanded that a live duck-billed platypus be sent from Australia to Britain. A vigorous male was shipped off but died shortly before arrival in Britain. This request can only be understood if placed in the context of Churchill's passion for exotic pets as well as the rich history of aristocratic menageries and live diplomatic gifts. Obtaining an animal hitherto unseen alive in Europe would have been a great zoological achievement for London Zoo and secured British authority in heated historical taxonomical debates. This zoological triumph, coupled with accomplishing an extravagant enterprise in the middle of war-time austerity would have boosted public morale. Most importantly, despite its death, the platypus, served as a token for mediating the soured relations between Australia and Britain. Churchill's platypus provides a unique case of animal collecting that incorporates effects on international diplomacy and public relations along with a great private eccentricity and passion. Copyright © 2011 Elsevier Ltd. All rights reserved.

  1. Response to the Federal Finance Minister's 'A new direction for Canada'

    International Nuclear Information System (INIS)

    1985-03-01

    This brief was presented by the Canadian Nuclear Association in response to the Canadian Federal Finance Minister's request for consultation with the business community particularly in view of his document, 'A New Direction for Canada'. The Canadian Nuclear Association feels that the nuclear industry can make a substantial contribution to the economic renewal of Canada by exploiting Canada's proven technologies, natural resources, human resources and marketing skills. The brief identifies strategic opportunities facing the nuclear industry at home and abroad and makes recommendations as to how they can be achieved. The main recommendations are that public support of nuclear research and development be maintained, that federal initiatives be used to facilitate nuclear exports of all types and to encourage foreign investment, that policies promoting increased use of electricity-based technology in industry be adopted, that the construction of a second nuclear reactor in New Brunswick be supported, that the CANDU option be maintained, and that the federal government continue to press other nuclear supplier nations to establish a common set of rules for international trade in nuclear materials and technology

  2. Camille Delaville (1838-1888, une journaliste féministe ?

    Directory of Open Access Journals (Sweden)

    Nelly Sanchez

    2011-01-01

    Full Text Available Cet article s’intéresse à l’existence, à la carrière littéraire et journalistique de cette femme de lettres aujourd’hui oubliée. Loin d’être purement biographique, cet article présente également sa conception de « la Femme ». Sans vraiment se prétendre féministe, Camille Delaville ne partagea pas moins les idées de ce mouvement. Elle consacra nombre d’articles à définir la nouvelle place de la Femme, instruite, indépendante…This article deals with the life and the career of this woman of letters today forgotten. This paper isn’t only a biography, her “Female notion” is also set out. Without claiming she was a Feminist, she was agree with all their views, she tried to define a new Woman position in a modern society.

  3. The safety of Ontario's nuclear power reactor. A scientific and technical review. Report to the Minister

    International Nuclear Information System (INIS)

    Hare, F.K.

    1988-01-01

    In December 1986 a study of the safety of the design, operating procedures and emergency plans associated with Ontario Hydro's nuclear generating plants was commissioned by the government of the province of Ontario. After receiving briefs from many interested groups and individuals, visiting the power plants, and consulting with nuclear industry and regulatory representatives in Canada and other countries, the commissioner presented this report to the Minister of Energy for Ontario. His major conclusion is that Ontario Hydro reactors are being operated safely and at high standards of technical performance. No significant adverse impact has been detected in either the work force or the public. The risk of accidents serious enough to affect the public adversely can never be zero, but is very remote. Major recommendations are that: Ontario Hydro re-examine its operational organization closely and commission a study of factors affecting human performance; and, that priority be given to finding a solution to pressure tube performance problems and to improving in-reactor monitoring. Sixteen other recommendations are presented relating to research and development, information exchange with other organizations, reactor performance, training, severe accident analysis, the provincial nuclear emergency plan, epidemiological studies, the Atomic Energy Control Board, public hearings, and women in the nuclear industry

  4. Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

    Directory of Open Access Journals (Sweden)

    Jędryczka Małgorzata

    2014-07-01

    Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

  5. Sensory factors affecting female consumers' acceptability of nail polish.

    Science.gov (United States)

    Sun, C; Koppel, K; Adhikari, K

    2015-12-01

    The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

  6. Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

    International Nuclear Information System (INIS)

    Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

    2014-01-01

    In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

  7. The social shaping of innovation in polish companies

    DEFF Research Database (Denmark)

    Lorentzen, Anne

    2003-01-01

    The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

  8. [Adhesion of oral microorganisms on dental porcelain polished and glazed].

    Science.gov (United States)

    Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

    2003-09-01

    This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

  9. Initial polishing time affects gloss retention in resin composites.

    Science.gov (United States)

    Waheeb, Nehal; Silikas, Nick; Watts, David

    2012-10-01

    To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

  10. Estonian Railway irked with lack of state cooperation

    Index Scriptorium Estoniae

    2005-01-01

    Eesti Raudtee soovib tõsta veotasu, samas kui Raudteeinspektsioon soovitas tasusid vähendada. Ettevõtte nõukogu esimehe Edward Burkhardti sõnul tekitaksid madalad tariifid kompaniile 800 miljoni krooni suuruse puudujäägi

  11. Example of teaching practice for the comedy the Cabinet Minister's Wife by Branislav Nušić

    Directory of Open Access Journals (Sweden)

    Stanisavljević Nevena B.

    2017-01-01

    Full Text Available Awareness of the need for innovation and enrichment curriculum with comedies by Branislav Nušić inspired us to offer a creative methodological model processing for comedy Gospođa ministarka (The Cabinet Minister's Wife, in order to point out the possibility of it's involvement in the educational process and the positive effects that such action had. The reason for selecting just this comedy lies in the fact that, despite the fact that it's title well understood, it's ideological layer, referring to criticism of the government and power, can positively influence the development of student's personality traits. Our proposal is to analyze comedy Gospođa ministarka (The Cabinet Minister's Wife in the sixth grade, however, such an approach does not cease the possibility of interpretation of a play in teaching practices, but use the offered model as the starting point of any new readings and interpretation in the educational practice.

  12. Material removal mechanisms in electrochemical-mechanical polishing of tantalum

    International Nuclear Information System (INIS)

    Gao, F.; Liang, H.

    2009-01-01

    Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

  13. Research on Grinding and Polishing Force Control of Compliant Flange

    Directory of Open Access Journals (Sweden)

    Li Chuang

    2015-01-01

    Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

  14. [Polish medical ethics in the period 1945-1980].

    Science.gov (United States)

    Wichrowski, Marek

    2003-01-01

    The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

  15. Condensate polishing guidelines for PWR and BWR plants

    International Nuclear Information System (INIS)

    Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

    1993-03-01

    Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

  16. Development of clean chemical mechanical polishing systems; Clean CMP system

    Energy Technology Data Exchange (ETDEWEB)

    Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

    1998-10-20

    Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

  17. Kütusefirmade huvid sundisid pöörama keskkonnale selja. Minister Tamkivi kiire meelemuutus / Väinu Rozental

    Index Scriptorium Estoniae

    Rozental, Väinu, 1957-

    2011-01-01

    Keskkonnaminister Jaanus Tamkivi muutis kardinaalselt määrust, millele ta oli alla kirjutanud kaks nädalat tagasi. Muudatuse kohaselt lubatakse osas sõidukites kasutada suurema väävlisisaldusega keskkonnale kahjulikumat kütust. Autori sõnul tekitab see küsimuse, kelle huvides minister tegutses. MTÜ Eesti Õliühing tegevdirektori Toomas Saksa arvamusi ja hinnanguid

  18. Development of hybrid fluid jet/float polishing process

    Science.gov (United States)

    Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

    2013-09-01

    On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

  19. Barriers and Limitations of Mentoring in Polish Organizations

    Directory of Open Access Journals (Sweden)

    Joanna Mesjasz

    2013-09-01

    Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

  20. Recurrent APC gene mutations in Polish FAP families

    Directory of Open Access Journals (Sweden)

    Pławski Andrzej

    2007-12-01

    Full Text Available Abstract The molecular diagnostics of genetically conditioned disorders is based on the identification of the mutations in the predisposing genes. Hereditary cancer disorders of the gastrointestinal tracts are caused by mutations of the tumour suppressor genes or the DNA repair genes. Occurrence of recurrent mutation allows improvement of molecular diagnostics. The mutation spectrum in the genes causing hereditary forms of colorectal cancers in the Polish population was previously described. In the present work an estimation of the frequency of the recurrent mutations of the APC gene was performed. Eight types of mutations occurred in 19.4% of our FAP families and these constitute 43% of all Polish diagnosed families.

  1. Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

    Science.gov (United States)

    Stein, David

    This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

  2. Implementation of the Bulgarian-Polish online dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2015-11-01

    Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

  3. Laser polishing for topography management of accelerator cavity surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2015-07-20

    Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

  4. Confocal Raman spectrocopy for the analysis of nail polish evidence.

    Science.gov (United States)

    López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

    2015-06-01

    Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

  5. The Honourable Lawrence Gonzi Prime Minister of Malta visiting CMS experiment on 10 January 2008, from left to right Ministry of Finance Permanent Secretary A. Camilleri, Ambassador V. Camilleri, Maltese Representative at CERN N. Sammut, Prime Minister L. Gonzi, CMS Collaboration Spokesperson T. Virdee, CERN Director-General R. Aymar, University of Malta Rector J. Camilleri, Adviser to Director-General E. Tsesmelis.

    CERN Multimedia

    Maximilien Brice

    2008-01-01

    The Honourable Lawrence Gonzi Prime Minister of Malta visiting CMS experiment on 10 January 2008, from left to right Ministry of Finance Permanent Secretary A. Camilleri, Ambassador V. Camilleri, Maltese Representative at CERN N. Sammut, Prime Minister L. Gonzi, CMS Collaboration Spokesperson T. Virdee, CERN Director-General R. Aymar, University of Malta Rector J. Camilleri, Adviser to Director-General E. Tsesmelis.

  6. An ageing anachronism: D.F. Malan as prime minister, 1948-1954

    Directory of Open Access Journals (Sweden)

    Lindie Koorts

    2010-11-01

    Full Text Available This article tells the behind-the-scenes tale of the first apartheid Cabinet under Dr D.F. Malan. Based on the utilisation of prominent Nationalists' private documents, it traces an ageing Malan's response to a changing international context, the challenge to his leadership by a younger generation of Afrikaner nationalists and the early, haphazard implementation of the apartheid policy. In order to safeguard South Africa against sanctions by an increasingly hostile United Nations, Malan sought America's friendship by participating in the Korean War and British protection in the Security Council by maintaining South Africa's Commonwealth membership. In the face of decolonisation, Malan sought to uphold the Commonwealth as the preserve of white-ruled states. This not only caused an outcry in Britain, but it also brought about a backlash within his own party. The National Party's republican wing, led by J.G. Strijdom, was adamant that South Africa should be a republic outside the Commonwealth. This led to numerous clashes in the Cabinet and parliamentary caucus. Malan and his Cabinet's energies were consumed by these internecine battles. The systematisation of the apartheid policy and the coordination of its implementation received little attention. Malan's disengaged leadership style implies that he knew little of the inner workings of the various government departments for which he, as Prime Minister, was ultimately responsible. The Cabinet's internal disputes about South Africa's constitutional status and the removal of the Coloured franchise ultimately served as lightning conductors for a larger issue: the battle for the party's leadership, which came to a head in 1954. Malan sought to secure the succession for his favourite, N.C. Havenga. However, he was outmanoeuvred by J.G. Strijdom and his allies. Malan's retirement marked the end of an era, while Strijdom's victory heralded a regional and generational shift in power.

  7. Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

    Science.gov (United States)

    Peethala, Brown Cornelius

    Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

  8. Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

    Directory of Open Access Journals (Sweden)

    Weingaertner, W. L.

    2010-10-01

    Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

    El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

  9. 14 May 2014 - Jamaican Minister of Science, Technology, Energy and Mining P. Paulwell signs the Guest book with CERN Head of International Relations R. Voss.

    CERN Multimedia

    Gadmer, Jean-Claude

    2014-01-01

    The Honourable Phillip Paulwell Minister of Science, Technology, Energy and Mining Leader of Government Business in the House of Representatives and Member of Parliament for the constituency of Kingston East and Port Royal Jamaica

  10. 26 CFR 31.3121(b)(8)-1 - Services performed by a minister of a church or a member of a religious order.

    Science.gov (United States)

    2010-04-01

    ... and application as is given to the term for income tax purposes. (3) (i) If a minister is performing..., is engaged by N University to teach history and mathematics. He performs no other service for N...

  11. 26 CFR 31.3401(a)(9)-1 - Remuneration for services performed by a minister of a church or a member of a religious order.

    Science.gov (United States)

    2010-04-01

    ... term “religious organization” has the same meaning and application as is given to the term for income... minister, is engaged by N University to teach history and mathematics. He performs no other service for N...

  12. The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

    OpenAIRE

    Bubnys, Arūnas

    2006-01-01

    The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

  13. Semi-strong informational efficiency in the Polish foreign exchange market

    OpenAIRE

    Luksz Goczek

    2015-01-01

    During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

  14. How can research be carried on without money. An interview with Andreas von Buelow, Minister of Research of Federal Republic of Germany

    Energy Technology Data Exchange (ETDEWEB)

    von Buelow, A

    1981-06-01

    When the treasury are not as full as they were, the question automatically arises as to public support for large-scale research facilities and basic research. The new Minister for Research in the Federal Republic of Germany clearly discloses what is possible at present and what is not in the way of State support for research. Therefore the Minister demands that industry should share in basic research and in the large-scale technological facilities required for research.

  15. Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    Science.gov (United States)

    Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

    2016-01-01

    This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

  16. Study on combined polishing process of aspherical aluminum mirrors

    Science.gov (United States)

    Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

    2017-10-01

    The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

  17. Using Nail Polish to Teach about Gender and Homophobia

    Science.gov (United States)

    Edwards, Nelta M.

    2010-01-01

    How might teachers help students investigate the relationship between gender and homophobia? This article describes an exercise that uses fingernail polish to do just that. The authors uses anecdotal evidence to describe the exercise in which students pair with someone of the opposite gender and paint each other's fingernails. Additionally, the…

  18. In-situ photopatterning of hydrogel microarrays in polished microchips

    NARCIS (Netherlands)

    Gümüscü, B.; van den Berg, Albert; Eijkel, Jan C.T.

    2015-01-01

    We present a fabrication method which enables simple and eproducible photopatterning of micron- sized hydrogel arrays inside closed microchips. To achieve this, the glass cover of the microchip is thinned by mechanical grinding and polishing. This procedure reduces the spacing between the photomask

  19. Bioethanol productions from rice polish by optimization of dilute acid ...

    African Journals Online (AJOL)

    Lignocellulose materials are abundant renewable resource for the production of biofuel from fermentative organism (Sacchromyces cervesiae). Rice polish is cheapest and abundant lignocelluloses resource and has potential to produce bioethanol. The main steps for the conversion of biomass into glucose required dilute ...

  20. An operational map of the Polish Coastal Front 1970

    DEFF Research Database (Denmark)

    Nielsen, Thomas Theis; Svenningsen, Stig Roar; Tinning, Morten

    2016-01-01

    The map of the Operational Plan for the Coastal Front, from Poland 1970 forms the basis for this paper. The map portraits the blueprint of the combined operational war plans for the Polish military in the late 1960’s and 70’s. It details the offensive against NATO countries and their forces...

  1. Social Interest in The Polish Doctrine of Monument Preservation

    Science.gov (United States)

    Antoszczyszyn, Marek

    2017-10-01

    The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

  2. Financial repression, money growth, and seignorage: The Polish experience

    NARCIS (Netherlands)

    Aarle, B. van; Budina, N.

    1997-01-01

    Financial Repression, Money Growth and Seignorage: The Polish Experience. — A small analytical framework is developed to analyze the relation between reserve requirements, base money growth and seignorage revenues. From the analysis, the authors can derive of steady-state seignorage revenues as a

  3. Detection of Polish clinical Aspergillus fumigatus isolates resistant to triazoles

    DEFF Research Database (Denmark)

    Nawrot, Urszula; Kurzyk, Ewelina; Arendrup, Maiken Cavling

    2018-01-01

    We studied the presence of triazole resistance of 121 Aspergillus fumigatus clinical isolates collected in two Polish cities, Warsaw and Wrocław, to determine if resistance is emerging in our country. We identified five itraconazole resistant isolates (4.13%) carrying the TR34/L98H alteration...

  4. Values Education--A Reality or Myth in Polish Schools

    Science.gov (United States)

    Switala, Eugeniusz

    2015-01-01

    The United Nations Decade of Education for Sustainable Development (DESD), which is coming to an end, will offer all kinds of summaries and reflections on this issue. The aim of this paper, strictly related with the goals of the DESD, is to answer the following questions: (1) "Is the Polish school ready to provide values education?"; (2)…

  5. Violation of interest-rate parity: a Polish example

    Science.gov (United States)

    Przystawa, Jerzy; Wolf, Marek

    2000-09-01

    The mechanism of the so-called “Bagsik Oscillator” is presented and discussed. In essence, it is a repeated exploitation of arbitrage opportunities that resulted from a marked departure from the interest-rate parity relationship between the local Polish currency and the western currencies.

  6. Novel ceria-polymer microcomposites for chemical mechanical polishing

    International Nuclear Information System (INIS)

    Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

    2008-01-01

    Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

  7. Novel ceria-polymer microcomposites for chemical mechanical polishing

    Energy Technology Data Exchange (ETDEWEB)

    Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

    2008-12-30

    Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

  8. Empirical relations of sediment transport prediction in Polish multibanks shore

    International Nuclear Information System (INIS)

    Pruszak, Z.

    1995-01-01

    Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author)

  9. Diamond turning and polishing tests on new RSP aluminium alloys

    NARCIS (Netherlands)

    Horst, R. ter; Haan, M. de; Gubbels, G.P.H.; Senden, R.; Venrooy, B.W.H. van; Hoogstrate, A.M.

    2012-01-01

    For years now conventional aluminium 6061 T6 has widely been used for mirrors in astronomical instruments, being diamond turned or since a few years also being optically polished. This allows the development of optical systems that can be tested and operated at any temperature, without being

  10. The Profile of a Polish Mutual Fund Manager

    Directory of Open Access Journals (Sweden)

    Dariusz Filip

    2018-05-01

    Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

  11. Polish scientists in fish immunology: a short history : review

    NARCIS (Netherlands)

    Muiswinkel, van W.B.; Pilarczyk, A.

    2015-01-01

    This review describes the role played by Polish scientists in the field of fish immunology and vaccination starting around 1900. In the early days, most publications were dealing with a description of relevant cells and organs in fish. Functional studies (phagocytosis, antibody response) came later

  12. Clear and compelling evidence: the Polish tribunal on abortion rights.

    Science.gov (United States)

    Girard, Françoise; Nowicka, Wanda

    2002-05-01

    On 25 July 2001 the Polish Federation for Women and Family Planning organised a Tribunal on Abortion Rights in Warsaw, to publicize the negative consequences of the criminalization of abortion in Poland. A panel of Polish and foreign experts heard the testimonials of seven Polish women's experiences under the 1993 "Anti-Abortion Act". Only two of the seven women were able to tell their stories in person. One died in 2001, at the age of 21, of an unsafe abortion. One is legally blind after having carried her last pregnancy to term. One is in prison for infanticide, which in all likelihood was committed by her boyfriend. National and foreign journalists were in attendance, as well as observers from all walks of life--writers, students, mothers, activists, feminists, husbands. The evidence was clear and compelling. Restrictive abortion laws make abortion unsafe by pushing it underground, endanger women's health, create a climate where even those services that are allowed by law-become unavailable, and contravene standards set by international human rights law. The restrictive abortion law in Poland has not increased the number of births; it has only caused women and their families suffering. The Tribunal brought the issue of abortion into the media prior to an election campaign and galvanised Polish and other Eastern European women's groups to become more active in defence of abortion rights.

  13. Heavy Metal Contamination of Popular Nail Polishes in Iran

    Directory of Open Access Journals (Sweden)

    Golnaz Karimi

    2015-06-01

    Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

  14. Polish adaptation of scoliosis research society-22 questionnaire.

    Science.gov (United States)

    Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

    2009-05-01

    Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

  15. Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

    International Nuclear Information System (INIS)

    Nichols, M A

    2001-01-01

    The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

  16. Scope of Nursing Care in Polish Intensive Care Units

    Directory of Open Access Journals (Sweden)

    Mariusz Wysokiński

    2013-01-01

    Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

  17. Great Britain and German-Polish Relations, 1929–1931

    Directory of Open Access Journals (Sweden)

    Zotova Ekaterina

    2014-12-01

    Full Text Available The article deals with the study of British-German relations during the period of exacerbation of territorial disputes between Germany and Poland in 1929-1931. Germany was making plans for revising the eastern borders. It sought to enlist the support of the new Labour government. Britain didn’t only approve of Germany's intention to carry out revision of the Treaty of Versailles (reparation issue, the evacuation of the Rhineland and the change in the German-Polish border, but also supported the strengthening of the political and economic situation in Germany as a whole. Assistance to Germany was advantageous for Britain. Firstly, the British support helped to improve the capacity of the purchasing power of the German market as one of the traditional markets of the English sale. Secondly, the strengthening of the position of the German cabinet meant failure of the French policy in Europe at this stage. The defeat of France in a dispute on the issue of early evacuation of the Rhineland would seriously devalue the foreign policy initiatives of Paris. Thirdly, the British government hoped that Germany will go into orbit of British political influence. The identity of the positions of the German and the British cabinets were considered as the components of British policy success not only in relations with France and Italy, but also with Czechoslovakia and Poland. Since the formation of the MacDonald’s cabinet, anti-Polish moods increased in the British course for the settlement of German-Polish relations. However, the threat of an attack on Poland by Germany was regarded by the government of Britain as unacceptable way of resolving the German-Polish conflict. Britain tried to follow the traditional foreign policy concept of “balance of power”, but the inefficiency of British policy “mediation” in European affairs was clearly shown in times of growing financial and economic crisis. The issue of the German-Polish border remained unsolved.

  18. IAEA Delivers Report on Nuclear Power Development to Belarus Deputy Prime Minister

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: The International Atomic Energy Agency today delivered the final report from an IAEA Integrated Nuclear Infrastructure Review (INIR) mission to Belarus. The report concludes that Belarus has made important progress in its development of nuclear infrastructure for a nuclear power programme and that Belarus is on its way to being well-prepared with its infrastructure to support the construction of a nuclear power plant. The report makes 16 recommendations and 22 specific recommendations to assist the national authorities in preparing the infrastructure necessary for the project. ''Belarus has already implemented some of the recommendations that we shared with them in June, and the Government plans to implement all the remaining ones,'' IAEA Deputy Director General Alexander Bychkov said after delivering the document to Belarusian Deputy Prime Minister Anatoly Tozik. ''This shows that the country is taking the report seriously.'' The main recommendations in the report include to revise Belarusian nuclear legislation to adequately address issues such as radioactive waste and spent fuel management, review the enforcement process, and norms relevant to civil liability for nuclear damage; to strengthen the regulatory body and the regulatory framework for licensing; and to develop comprehensive management systems for the nuclear project. Additionally, specific suggestions were made about its infrastructure development activities based on guidance contained in the publication Milestones in the Development of a National Infrastructure for Nuclear Power. ''The report acknowledges Belarus' strong expertise in radiation protection and environmental monitoring and recognizes that good coordination in the development of Belarus' nuclear power programme is beneficial,'' Bychkov said. Belarus began considering nuclear power in the 1980s and recently renewed its efforts. The Concept of Energy Security of the Republic of Belarus, promulgated in September 2007, called for

  19. Ministering effectively in the context of Pentecostalism in Africa: A reformed missional reflection

    Directory of Open Access Journals (Sweden)

    T. Derrick Mashau

    2013-03-01

    Full Text Available Pentecostalism is a global phenomenon with a large following in North America, Latin America, Asia, Africa and other parts of the world. The rise, growth and influence of Pentecostalism in Africa are enormous and have, without fear of contradiction, become one of the dominant expressions of Christianity on the continent. A contextual analysis of Christianity in Africa showed that the African soil is more fertile for this movement. Its manifestation ranges from classical Pentecostalism (first wave, to the charismatic movement (second wave and the charismatic renewal movements (third wave. Its growth in Africa came with a fair number of missiological challenges to evangelical reformed churches, and therefore this article sought to sketch this movement by providing a historical perspective on Pentecostalism, a contextual analysis of Pentecostalism in Africa, issues and challenges in Pentecostalism, and concludes by looking closely at a reformed missional reflection, thereby providing some nuances as to how best one can minister effectively in the context of Pentecostalism. This article called for evangelical reformed churches to exercise the spirit of discernment whilst dealing with the influence of Pentecostalism, but at the same time to learn from this movement the zeal for mission and the role of the Holy Spirit in mission. Reformatoriese missionale nadenke oor effektiewe bediening in the konteks van Afrika Pentekostalisme. Pentekostalisme is 'n globale fenomeen met ‘n groot aanhang in Noord-Amerika, Latyns Amerika, Asië, Afrika en ander wêrelddele. Die opkoms, groei en invloed van Pentekostalisme in Afrika was geweldig en het een van die dominante gedaantes van Christenskap op die kontinent geword. ‘n Kontekstuele analise van Christenskap in Afrika wys dat Afrika meer vatbaar was vir hierdie tendens. Die manifestasie daarvan reik van klassieke Pentekostalisme (eerste golf, tot die charismatiese beweging (tweede golf en die charismatiese

  20. Statement by Minister Peng Peiyun at the International Conference on Population and Development.

    Science.gov (United States)

    Peng, P

    1994-10-01

    The speech of Madam Peng Peiyun, state counselor and minister of the State Family Planning Commission in China, before the International Conference on Population and Development in Cairo in 1994, emphasized 6 basic points about fertility decline. 1) Population as an issue is about development. The only solution is to work toward sustained development of productivity while promoting social and economic development in environmentally protected ways. 2) Governments should provide "acceptable, obtainable, and affordable" quality family planning services. Governments should help couples and individuals freely and responsibly decide on childbearing without coercion. 3) There is no one recommended model for reducing rapid population growth and enhancing development. Countries have different cultures, levels of economic development, population conditions, and historical traditions. 4) Women's status should be improved through expansion of opportunities for education, involvement in politics and economic development, legal protection of women's rights and interests, and "realization of gender equality." Women need more information, education, and counseling on reproductive health and family planning. Males need to take more responsibility for family planning. 5) International cooperation and government responsibility are required for stabilization of population growth and attainment of sustainable development. Developing countries need improved economic conditions, increased investment in population and development programs, and transfers of technology from developed countries. The principles of mutual respect and mutual benefit according to the spirit of the UN Charter should prevail. UN organizational support should function according to the principles of universality and neutrality. 6) China's goal is to achieve sustained economic growth and development, to meet the material and cultural needs of the Chinese people, and to improve the quality of Chinese life. Without

  1. Symmetry or asymmetry? Cross-border openness of service providers in Polish-Czech and Polish-German border towns

    Directory of Open Access Journals (Sweden)

    Dołzbłasz Sylwia

    2015-03-01

    Full Text Available The symmetry and/or asymmetry in terms of cross-border openness of service providers is examined in this article, for the cases of two border twin towns: Cieszyn/Český Těšín at the Polish-Czech border, and Gubin/Guben at the Polish-German border. To assess the level of openness of firms towards clients from the other side of the border, four trans-border categories were examined: neighbour’s language visible at store location; business offers in the language of the neighbour; the possibilities of payment in the neighbour’s currency; and the staff’s knowledge of the language. This enabled a comparison of both parts of the particular twin towns in relation to the character of cross-border openness, as well as an assessment of their symmetry/asymmetry. Comparisons of Gubin/Guben and Cieszyn/Český Těšín with respect to the analysed features were also carried out. The analysis shows significant variation in the level of cross-border openness towards clients from neighbouring countries. Whereas in the Polish-Czech town a relative symmetry was observed, in the Polish-German case, significant asymmetry was noted.

  2. Interview about nuclear regulatory supervision with Stefan Mappus, Baden-Wuerttemberg State Minister for the Environment and for Transport; Interview zur Kernenergieaufsicht mit Stefan Mappus, Minister fuer Umwelt und Verkehr des Landes Baden-Wuerttemberg

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2005-02-01

    Stefan Mappus, member of the Baden-Wuerttemberg State Parliament, has been State Minister for the Environment since July 14, 2004. He has criticized deficiencies in nuclear power plants, but also has expressed himself in favor of continuing to use nuclear power. This interview covers the safety of nuclear power plants in Baden-Wuerttemberg; the fines to be imposed within the framework of nuclear regulatory supervision; and ''new accents'' in supervision, among others. Mr. Mappus also comments on the activities of his Ministry in connection with events at the Philippsburg nuclear power station and the consequences drawn by the regulatory authority. (orig.)

  3. Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

    Science.gov (United States)

    Dunn, Christina R; Walker, David D

    2008-11-10

    In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

  4. Dealing with bioethical dilemmas: A survey and analysis of responses from ministers in the Reformed Churches in South Africa

    Directory of Open Access Journals (Sweden)

    Magdalena (Leentie C. de Lange

    2012-02-01

    Full Text Available Recent technological advancements in Bioethics have been rapid and incremental, leaving little time for Christian ethicists to reflect or develop a coherent methodological approach. To assess the situation in the Reformed Churches in South Africa (RCSA, a bioethical questionnaire was developed and administered during the synod in 2009. Three practical questions served as point of departure, viz. which bioethical issues confronted ministers in their work environment, which value judgement trends are evident when counselling members of their congregations and what theoretical frameworks or resources do they call upon when reflecting on these difficult situations? The survey consisted of 19 questions with several subquestions that sought demographic information to determine the population and information about bioethical issues confronting them, methodological strategies they apply and how they think they can contribute to the resolution of any such bioethical dilemmas. The results were tabulated and it was concluded that recent advancements in biotechnology cannot be ignored or dealt with in a piecemeal fashion any longer, either by the RCSA or its ministers. The need for clarity and analysis of the principles underlying those theories that guide or should guide their decision-making and pastoral care in dealing with bioethical dilemmas was emphasised. The findings highlighted the need for appropriate courses in Bioethics to be taught during initial theological training, as well as the need to keep the debate alive by offering workshops, seminars and short courses for practicing ministers to enhance awareness and allay fears and uncertainties in this very dynamic and morally challenging field of human and scientific endeavour.

  5. Strain-free polished channel-cut crystal monochromators: a new approach and results

    Science.gov (United States)

    Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

    2017-08-01

    The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

  6. Influence of polishing on surface roughness following toothbrushing wear of composite resins.

    Science.gov (United States)

    Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

    2017-01-01

    This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

  7. Legal status of minister's notices and technology standards of 'Korea institute of nuclear safety'(KINS) to regulate nuclear safety

    International Nuclear Information System (INIS)

    Jung, S. K.; Jung, M. M.; Kim, S. W.; Jang, K. H.; Oh, B. J.

    2003-01-01

    Concerning nuclear safety or technology standards, each of 'notices' issued by minister of science and technology(MOST) empowered by law of its regulation is obviously forceful as a law, if not all. But the standards made by the chief of Korea institute of nuclear safety(KINS) to meet the tasks entrusted to KINS by MOST is only conditionally forceful as a law, that is, on the condition that law or regulation empowered the chief of KINS to make nuclear safety and/or technology standards

  8. The future investment programme - the BMU (Federal Minister of the Environment) presents its new research goals. Conference proceedings

    International Nuclear Information System (INIS)

    Zimmermann, G.

    2002-01-01

    There is much to indicate that the fossil and nuclear age will be followed by a second solar age. This will be a high-technology era, for which the Federal Minister attempts to set the stage with the new investment programme. From 2001 through 2003, a total of 30 million EUR will be allotted as funds for promoting solar thermal power plants, geothermal power, and ecological research parallel to projects in offshore wind power, biomass utilisation and fuel cells. About 50 projects were accepted so far. (orig.)

  9. Does Female Leadership Matter? An Analysis of Swedish Foreign Ministers and their Parliamentary Speeches, 1955–2016

    OpenAIRE

    Bäck, Hanna; Björkdahl, Annika

    2017-01-01

    The current Swedish Foreign Minister, Margot Wallström, has in her foreign policy statement claimed that a feminist foreign policy will be an integral part of activities throughout the Swedish Foreign Service. Even though an explicit ‘feminist foreign policy’ is a rather recent and ‘Swedish’ phenomenon, foreign policies in line with such a general ‘feminist’ agenda may have been implemented throughout history, by various foreign policy leaders. The question is, does the gender of leaders matt...

  10. Polish media and public opinion on NPP Mochovce commissioning

    International Nuclear Information System (INIS)

    Latek, Stanislaw

    1999-01-01

    The so called 'Mochovce Problem' was one of the major topics in Polish media in the period from May to July 1998. The nuclear power plant commissioning caused an unexpectedly strong reaction, especially in the newspapers, slightly less so in electronic media. Faced with clearly hostile media reaction to Mochovce NPP, the National Atomic Energy Agency representatives, together with atomic and nuclear experts, undertook to change these attitudes. In numerous interviews, letters to the editors and talks with journalists, they attempted to correct the mistakes, explain the true safety situation in the nuclear power plant, by whom it was constructed, who supervised and tested the systems and so on. The completion of Mochovce NPP construction improved significantly the electricity balance in Slovakia, thus decreasing the pressure for continuing the operation of older Bohunice V1 units beyond their design lifetime. For this reason, as well as in view of striving for improvement in environmental factors beyond Polish southern border, especially after Kyoto/97 decisions on greenhouse gases emissions, the public opinion in Poland should support the Mochovce NPP construction. In 1996 Poland has signed with Slovakia a bilateral inter-governmental agreement on the prompt notification on nuclear accidents and on the cooperation in the nuclear safety and radiological protection matters. On the basis of this agreement the experts from Polish National Atomic Energy Agency are in perpetual contact with Slovakian Nuclear Regulatory Body and in each and every moment can obtain full and comprehensive information on the plant parameters iportant for nuclear safety. The experts explanations, together with the NAEA top management visit to the plant itself, brought some results. The media became less aggressive, and Polish public and authorities - contrary to the Austrians - do not protest loudly against the commissioning of this newest European NPP. Now, in December 1998, the tune of

  11. Natural immunity factors in Polish mixed breed rabbits.

    Science.gov (United States)

    Tokarz-Deptuła, B; Niedźwiedzka-Rystwej, P; Adamiak, M; Hukowska-Szematowicz, B; Trzeciak-Ryczek, A; Deptuła, W

    2015-01-01

    Mixed-breed rabbits in Poland are widely used for diagnostic and scientific research and as utility animals, therefore there is a need to know their immunological status, as well as their haematological status. In this study natural immunity factors were analyzed in Polish mixed-breed rabbits and Polish mixed-breed rabbits with addition of blood of meet-breed, considering the impact of sex and season of the year (spring, summer, autumn, winter) using measurement of non-specific cellular and humoral immunity parameters in peripheral blood. The study has revealed that there is a variety between the two commonly used mixed-breed types of rabbits, especially when sex and season is concerned, which is crucial for using these animals in experiments.

  12. Impact of polishing on the light scattering at aerogel surface

    International Nuclear Information System (INIS)

    Barnyakov, A.Yu.; Barnyakov, M.Yu.; Bobrovnikov, V.S.; Buzykaev, A.R.; Danilyuk, A.F.; Katcin, A.A.; Kononov, S.A.; Kirilenko, P.S.; Kravchenko, E.A.; Kuyanov, I.A.; Onuchin, A.P.; Ovtin, I.V.; Predein, A.Yu.; Protsenko, R.S.

    2016-01-01

    Particle identification power of modern aerogel RICH detectors strongly depends on optical quality of radiators. It was shown that wavelength dependence of aerogel tile transparency after polishing cannot be described by the standard Hunt formula. The Hunt formula has been modified to describe scattering in a thin layer of silica dust on the surface of aerogel tile. Several procedures of polishing of aerogel tile have been tested. The best result has been achieved while using natural silk tissue. The resulting block has optical smooth surfaces. The measured decrease of aerogel transparency due to surface scattering is about few percent. This result could be used for production of radiators for the Focusing Aerogel RICH detectors.

  13. Problems in laser repair welding of polished surfaces

    Directory of Open Access Journals (Sweden)

    A. Skumavc

    2014-10-01

    Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

  14. E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

    Directory of Open Access Journals (Sweden)

    Joanna Papińska-Kacperek

    2013-07-01

    Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

  15. Legal aspects of Polish Tax and Social Security in Agriculture

    Directory of Open Access Journals (Sweden)

    Agnieszka Parlińska

    2008-12-01

    Full Text Available In the paper are describing legal aspects of treatment of farming sector in the tax and social security system in Poland. Tax System in Polish Agriculture is an integral part of Polish Tax System. Most taxes paid by farmers are property taxes, which supplied the budget of main local authority in Poland (municipality. In some cases farmers pay also personal income tax and value added tax like those, who run specific agricultural production as well individual farmers who operate through a limited liability company are subject to corporate income tax. The social security fund for farmers (known as KRUS was speared in 1990 from the social security system (ZUS. Farmers receive similar benefits with regard to health care, education, and social welfare although the contributions into the farmers system are lower then under the ZUS system.

  16. Edge effect modeling of small tool polishing in planetary movement

    Science.gov (United States)

    Li, Qi-xin; Ma, Zhen; Jiang, Bo; Yao, Yong-sheng

    2018-03-01

    As one of the most challenging problems in Computer Controlled Optical Surfacing (CCOS), the edge effect greatly affects the polishing accuracy and efficiency. CCOS rely on stable tool influence function (TIF), however, at the edge of the mirror surface,with the grinding head out of the mirror ,the contact area and pressure distribution changes, which resulting in a non-linear change of TIF, and leads to tilting or sagging at the edge of the mirror. In order reduce the adverse effects and improve the polishing accuracy and efficiency. In this paper, we used the finite element simulation to analyze the pressure distribution at the mirror edge and combined with the improved traditional method to establish a new model. The new method fully considered the non-uniformity of pressure distribution. After modeling the TIFs in different locations, the description and prediction of the edge effects are realized, which has a positive significance on the control and suppression of edge effects

  17. Africa and Its People in the Polish Media

    Directory of Open Access Journals (Sweden)

    Średziński Paweł

    2017-06-01

    Full Text Available The African continent is treated by the Polish media marginally and usually seen through the lens of four domains of stereotypical perceptions that are associated with difficult life conditions, threats and dangers, beautiful and wild nature, as well as original and diverse cultures. Monitoring of the Polish media has become very important in this situation. That is why the results of first media monitoring report were published in 2011 by ‘Africa Another Way’ Foundation. Five years later the monitoring was repeated. It is hard to resist the impression that Africa is still viewed as this poor, underdeveloped and dangerous continent. And the way it is presented translates into the way individuals of African descent are perceived.

  18. Restaurants and hotels expenditure in Polish households of the elderly

    Directory of Open Access Journals (Sweden)

    Piekut Marlena

    2016-03-01

    Full Text Available The age of household members is an important factor for expenditures. The aim of the study is to investigate the level of expenditure on restaurants and hotels incurred in Polish households of the elderly in 2004-2013 and to identify the factors affecting such expenditures. The source of information used in the study was the household budget survey of the Central Statistical Office of Poland. The main methods used in this study were variance analysis and regression analysis. Restaurants and hotels expenditure increases every year together with their share in total household expenditure. The most important factors affecting the restaurants and hotels spending in Polish households of the elderly are: income per capita and the level of education of the head of the family. The study on consumption determinants at different groups leads to better understanding of consumer behavior circumstances and thereby ensuring a good quality of life for the people of the elderly.

  19. Macroeconomic Reasons of Debts in Polish Health Service

    Directory of Open Access Journals (Sweden)

    Kamila Szymańska

    2008-04-01

    Full Text Available The article deals with the problem of debts in polish health service. Author analyzes the macroeconomic reasons of this situation. As a main reasons are indicated: a specificity of the health service market, which leads to a inefficient allocation of health services, lack of reliable data on health care system, too low level of public expenditure on a health care, inappropriate allocation of public capital and a monopolistic position of the payer.

  20. Ion beam polishing for three-dimensional electron backscattered diffraction

    DEFF Research Database (Denmark)

    Saowadee, Nath; Agersted, Karsten; Ubhi, H.S.

    2013-01-01

    averaging and/or poor 3D-EBSD data quality. In this work a low kV focused ion beam was successfully implemented to automatically polish surfaces during 3D-EBSD of La- and Nb-doped strontium titanate of volume 12.6 × 12.6 × 3.0 μm. The key to achieving this technique is the combination of a defocused low k...

  1. Polish epistolography in Ukrainian polemic of the 17th century

    Directory of Open Access Journals (Sweden)

    Sukhareva Svitlana Volodymyrivna

    2013-06-01

    Full Text Available The block of Polish epistolary in the system of polemical prose of the 17th century is analyzed in the article. It's indicated in its genre features, holistic character, publicistic and artistic level. Special attention is paid to the epistolary style of Hypatij Potij, Andrew Muzhylovski and Klyryk from Ostrog. Innovative and classical elements of epistolary heritage of the Baroque epoch are identified.

  2. Sports metaphors in Polish written commentaries on politics

    OpenAIRE

    Jarosław Wiliński

    2015-01-01

    This paper seeks to investigate what sports metaphors are used in Polish written commentaries on politics and what special purpose they serve. In particular, the paper examines structural metaphors that come from the lexicon of popular sports, such as boxing, racing, track and field athletics, sailing, etc. The language data, derived from English Internet websites, has been grouped and discussed according to source domains. Applying George Lakoff and Mark Johnson’s approach to metaphor, the p...

  3. [Polish forensic entomology--the past, present and future perspectives].

    Science.gov (United States)

    Skowronek, Rafał; Chowaniec, Czesław

    2010-01-01

    Forensic medicine increasingly more often benefits from the achievements of other biological sciences, which may be used in post mortem investigation. One of them is forensic entomology--the science based on the knowledge about biology of insects preying on cadavers. The objective of this article is to present the history of Polish forensic entomology, its present state and possibilities and directions of further development.

  4. Mutual Fund Performances of Polish Domestic Equity Fund Managers

    OpenAIRE

    Tan, Ömer Faruk; Ünal, Gözde

    2015-01-01

    Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE), thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Pol...

  5. Consolidation Processes: Raiders & Targets in Polish Financial Institutions

    OpenAIRE

    Poteraj, Jarosław

    2004-01-01

    The work consists of five chapters, an annex and an appendix. In the first chapter the author describes the point of consolidation processes, presents: the meaning of consolidation processes, active and institutional aspects of merger execution, gives a classification of the consolidation processes and considers conditions of execution of consolidations processes in the Polish law, The next chapter concerns reasons of consolidation processes. The author describes there in turn: motives of the...

  6. Mutual Fund Performances of Polish Domestic Equity Fund Managers

    Directory of Open Access Journals (Sweden)

    ömer faruk tan

    2015-10-01

    Full Text Available Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE, thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Poland made an incredible progress, whether fund managers show better or worse performance than the market. Methodology/Methods: In order to evaluate fund manager performances, Jensen alpha (1968 is computed, which depicts selectivity skills of fund managers. For determining market timing ability of fund managers, Treynor & Mazuy (1966 regression analysis and Henriksson & Merton (1981 regression analysis are applied. Fund performances are evaluated using Warsaw Stock Exchange Index as the benchmark index. Scientific aim: In this study, we have tried to evaluate selectivity skills and market timing ability of Polish fund managers. A total of 14 equity fund managers’ performances are analysed. The study can be guiding especially for investors who are interested in Polish equity fund performances in a period where emerging stock markets outperformed with quantitative easing. Findings: Jensen (1968 alphas indicate that over this period fund managers did not have selective ability, as none of the 14 funds had statistically significant positive alphas. Furthermore, Treynor & Mazuy (1966 and Henriksson & Merton (1981 regression analysis indicate that over the same period fund managers did not also have market timing ability, as again none of the 14 funds had statistically significant positive coefficients. Conclusions: In this work, we can detect that in the era of quantitative easing, although the financial market in Poland made an incredible progress, the fund returns were

  7. Fracking in the Polish press: Geopolitics and national identity

    International Nuclear Information System (INIS)

    Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

    2014-01-01

    In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

  8. Cogeneration – development and prospect in Polish energy sector

    Directory of Open Access Journals (Sweden)

    Matuszewska Dominika

    2017-01-01

    Full Text Available Next 10-15 years are crucial for condition of Polish energy sector in light of challenges arising mainly from increasing demand for electric energy, need of reducing greenhouse gases emissions and shutdowns of old units. In this situation cogeneration can be one of the most rational way to meet those circumstances. This paper analyzes present development of cogeneration in Poland and its prospect for future.

  9. Chemical etching and polishing of InP

    International Nuclear Information System (INIS)

    Kurth, E.; Reif, A.; Gottschalch, V.; Finster, J.; Butter, E.

    1988-01-01

    This paper describes possibilities of several chemical preparations for the selective cleaning of InP surfaces. The investigations of the surface states after the chemical treatment were carried out by means of XPS measurements. A pre-etching with (NH 4 ) 2 S 2 O 8 :H 2 SO 4 :H 2 O and a polishing with 1% bromine in methanol produce optically smooth (100)-and (111) P surfaces free of oxides. (author)

  10. Between Positivism, Narrativism and Idealisation in Polish Methodology of History

    OpenAIRE

    Brzechczyn, Krzysztof

    2014-01-01

    This paper has two main purposes. Its primary purpose is to present the reception of the discussion between positivism and narrativism in Polish methodology of history. A secondary one is to paraphrase, using the notion apparatus of the idealisational theory of science, the issue of the accuracy of explanation. The paper consists of six parts. In the first, Hempel’s deductive-nomological (or covering law) model of explanation is presented. In the second part, the main tenets and assumptions o...

  11. Government Crisis Assessment and Reputation Management. A Case Study of the Vietnam Health Minister's Crises in 2013-2014

    Directory of Open Access Journals (Sweden)

    Tuong-Minh Ly-Le

    2015-06-01

    Full Text Available In Vietnam, many government announcements have gathered negative receptions from the public. Among them, Ms. Nguyen Thi Kim Tien, Vietnam Minister of Health, has received more of it. Through the case study of Ms. Kim Tien’s many scandals during the 2013-2014 period, this study is interested to see if the health scandals eventually elevated into a government crisis, how they affected the minister’s reputation, and what she could have done to better respond to the public. This study examined news articles on such health scandals to confirm whether the health scandals indeed escalated to be a government crisis. It also identified the advantages and disadvantages of Ms. Kim Tien’s responses in restoring her reputation to the public to understand what factors contributed to public dissatisfaction toward the minister. This study concluded that poorly-managed health scandals eventually elevated into a government crisis and greatly affected the minister’s reputation. It is suggested that PR is what the government needs to deal with such situations. The research also leaves room for a quantitative approach to the case to increase the result’s validity and representativeness. Until now, as the health issues and the resignation appeals are still needed, the crisis management effort should get more attention from the government, and such study is needed to better understand the situation.

  12. Fontes para a história dos 50 anos do Ministério da Saúde

    Directory of Open Access Journals (Sweden)

    Lima Ana Luce Girão Soares de

    2003-01-01

    Full Text Available Este trabalho e um levantamento das fontes sobre a história do Ministério da Saúde existentes no acervo da Casa de Oswaldo Cruz/Fiocruz. Utilizamos como marcos cronológicos os cinqüenta anos anteriores à lei 1.920, de 25 de julho de 1953, que separou a saúde e a educação em pastas autônomas. Nesse período foram lançadas as bases que fundamentariam as políticas públicas de saúde e informariam a estrutura do futuro ministério. Privilegiou-se aqui também a ação dos sanitaristas e intelectuais que figuraram como atores importantes no processo de construção ideológica não só das estruturas de Estado, como também das próprias políticas.

  13. The Energy Commission's notice to the Minister of Natural Resources regarding the place of wind energy in Quebec's energy portfolio

    International Nuclear Information System (INIS)

    Dumais, A.; Frayne, A.; Tanguay, F.

    1998-01-01

    In December 1997 Quebec's Minister of Natural Resources requested that the Energy Commission advise him on the quota given to wind energy in the future energy development plans of Hydro-Quebec. The Commission's report to the Minister includes 18 recommendations. Among these is a recommendation that an assessment of wind resources be conducted as soon as possible to identify suitable sites for the installation of wind turbines. A provincial program for the development of wind energy is also recommended, to be initiated by the year 2002, and that it should proceed over the next nine years to reach a target production capacity of 450 MW by the year 2011. This production would come from the yearly installation of 60 to 70 wind turbines of 750 kV. The Commission also recommended that in the initial years costs for this wind energy not exceed that of the Le Nordais project, i.e. 5.8 cents per kWh. Any additional costs incurred in the generation of wind electricity over conventional hydro power should be assumed by the Quebec Government. Conversely, in instances where the wind power is sold to consumers outside of the province, Hydro-Quebec should pay for the full cost of this power. 8 tabs., 1 appendix

  14. Efficiency as a parameter for assessing the Polish healthcare system

    Directory of Open Access Journals (Sweden)

    Magdalena Bogdan

    2018-04-01

    Full Text Available Introduction. Efficacy is defined as one of the most valid parameters of health system evaluation. It should be said that there is no consistent definition of the concept of effectiveness in health care, which would allow for the evaluation and comparison of health systems in the world. One can not point to the best or even near ideal of the health system. However, you can rank individual health systems with respect to the evaluation of individual parameters or groups of parameters. One of the possibilities is to evaluate the effectiveness of the system. Aim of the study. The aim of the article is to define and analyze particular types of system effectiveness in the context of the Polish health system. Description of knowledge. The literature on the subject is divided into operational and dynamic efficiency. Dynamic efficiency is divided into adaptive and innovative. The Polish health system is characterized by high operational efficiency. Operational efficiency determines the intensity of the system. The key factor for improving the health of the Polish society, as a factor of socio-economic development of the country is to improve the dynamic efficiency of the system. Conclusions. Health care in Poland has high operational efficiency while low dynamic efficiency, both adaptive and innovative, which clearly demonstrates the existence of a paradox of the overall effectiveness of the health care system in Poland.

  15. The attractiveness of family medicine among Polish medical students.

    Science.gov (United States)

    Gowin, Ewelina; Horst-Sikorska, Wanda; Michalak, Michał; Avonts, Dirk; Buczkowski, Krzysztof; Lukas, Witold; Korman, Tomasz; Litwiejko, Alicja; Chlabicz, Sławomir

    2014-06-01

    In many developed countries tuning supply and demand of medical doctors is a continuous challenge to meet the ever changing needs of community and individual patients. The long study period for medical doctors creates the opportunity to observe the current career preferences of medical students and evolution in time. To investigate the career choices of Polish students in different stages of their medical education. Medical students at five Polish medical universities were questioned about their career aspirations in the first, third and sixth year. A total of 2020 students were recruited for the survey. Among first year students 17% preferred family medicine as final career option, compared to 20% in the third year, and 30% in the sixth year (significant trend, P family medicine: 71% women versus 62% women in the group with a preference for a non-family medicine orientation (P = 0.008). Medical students rejecting a career as a family doctor stated that the impossibility to work in a hospital environment was the determining factor. The opportunity for professional development seems to be an important determining factor in the choice of a medical specialty in Poland. The proportion of Polish students choosing family medicine increases during their progress in medical education, with one third of students interested in a career in family medicine by year six.

  16. Cleaning, abrasion, and polishing effect of novel perlite toothpaste abrasive.

    Science.gov (United States)

    Wang, Bo

    2013-01-01

    This study was intended to optimize perlite particle size and morphology for better tooth cleaning and lower tooth abrasion, and to evaluate the performance of a whitening toothpaste containing the optimized perlite abrasive for tooth cleaning, abrasion, and polishing. Perlite toothpaste abrasive samples were prepared by air classifying a commercial expanded perlite product. The tooth cleaning and abrasion properties for these classified perlite samples were reported via the pellicle cleaning ratio (PCR) and relative dentin abrasion (RDA). Performance of the whitening toothpaste containing the optimized perlite abrasive in tooth cleaning, polishing, and abrasion was evaluated against a widely used synthetic high-cleaning silica. Air classification removes large perlite particles and also physically changes perlite particle morphology from mostly three dimensional and angular particles to mainly two dimensional and platy particles. All the classified samples show good tooth cleaning effect, but tooth abrasion decreases significantly with decreasing particle size. Compared to high-cleaning silica whitening toothpaste, the whitening toothpaste containing the optimized perlite abrasive (PerlClean) is slightly better at tooth cleaning, lower in tooth abrasion, and significantly better at tooth polishing. Fine platy perlite particles are effective in tooth cleaning with low tooth abrasion. The enhanced performance of optimized perlite toothpaste abrasive compared to high-cleaning silica in a whitening toothpaste is attributed to the optimized particle size distribution and the unique platy particle geometry.

  17. Mirror surface metrology and polishing for AXAF/TMA

    International Nuclear Information System (INIS)

    Slomba, A.; Babish, R.; Glenn, P.

    1985-01-01

    The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

  18. The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Marcin Puziak

    2017-06-01

    Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

  19. The prevalence of burnout syndrome in Polish anaesthesiologists.

    Science.gov (United States)

    Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

    2014-01-01

    Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

  20. A Comparative Analysis of Polish and Czech International New Ventures

    Directory of Open Access Journals (Sweden)

    Lidia Danik

    2016-06-01

    Full Text Available The goal of this paper is to compare the characteristics of Polish and Czech companies which follow the Born Global internationalization model. More concretely, the analysis aims to discover the differences or similarities in terms of the internationalization paths of Polish and Czech SMEs in the characteristics of their managers in terms of the so-called “international vision” and in their innovativeness level. The introductory part of article provides a description of this internationalization model and the International New Ventures traits (INV and summarizes the recent studies on this topic conducted in Poland and Czech Republic. In the empirical part, the International New Ventures from the two countries are compared. The Polish sample includes 105 companies which were surveyed with use of computer assisted telephone interviews in autumn 2014. For the Czech Republic, the sample consists of 54 small and medium-sized companies, which were surveyed using the computer assisted web interviews from November 2013 till January 2014. The surveyed companies in both countries fulfilled the definition of Born Globals. Descriptive statistics, cross-tabulation analysis and non-parametric tests are applied to accomplish the goals of the paper.

  1. Fungal Biomass Protein Production from Trichoderma harzianum Using Rice Polishing.

    Science.gov (United States)

    Ahmed, Sibtain; Mustafa, Ghulam; Arshad, Muhammad; Rajoka, Muhammad Ibrahim

    2017-01-01

    Industrially important enzymes and microbial biomass proteins have been produced from fungi for more than 50 years. High levels of crude protein as much as 45% are present in fungal biomass with balanced essential amino acids. The aim of this study was to access the potential of Trichoderma harzianum to produce fungal biomass protein from rice polishings. Maximum biomass yield was obtained at 5% (w/v) rice polishings after 72 h of incubation at 28°C at pH 4. Carbon and nitrogen ratio of 20 : 1 gave significantly higher production of fungal biomass protein. The FBP in the 75 L fermenter contained 49.50% crude protein, 32.00% true protein, 19.45% crude fiber, 9.62% ash, 11.5% cellulose content, and 0.325% RNA content. The profile of amino acids of final FBP exhibited that all essential amino acids were present in great quantities. The FBP produced by this fungus has been shown to be of good nutritional value for supplementation to poultry. The results presented in this study have practical implications in that the fungus T. harzianum could be used successfully to produce fungal biomass protein using rice polishings.

  2. Antimicrobial susceptibility of Brachyspira hyodysenteriae isolated from 21 Polish farms.

    Science.gov (United States)

    Zmudzki, J; Szczotka, A; Nowak, A; Strzelecka, H; Grzesiak, A; Pejsak, Z

    2012-01-01

    Swine dysentery (SD) is a common disease among pigs worldwide, which contributes to major production losses. Antimicrobial susceptibility testing of B. hyodysenteriae, the etiological agent of SD, is mainly performed by the agar dilution method. This method has certain limitations due to difficulties in interpretation of results. The aim of this study was the analysis of antimicrobial susceptibility of Brachyspira hyodysenteriae (B. hyodysenteriae) Polish field isolates by broth microdilution procedure. The study was performed on 21 isolates of B. hyodysenteriae, collected between January 2006 to December 2010 from cases of swine dysentery. VetMIC Brachyspira panels with antimicrobial agents (tiamulin, valnemulin, doxycycline, lincomycin, tylosin and ampicillin) were used for susceptibility testing of B. hyodysenteriae. The minimal inhibitory concentration (MIC) was determined by the broth dilution procedure. The lowest antimicrobial activity was demonstrated for tylosin and lincomycin, with inhibition of bacterial growth using concentrations > 128 microg/ml and 32 microg/ml, respectively. In the case of doxycycline, the MIC values were < or = 2.0 microg/ml. No decreased susceptibility to tiamulin was found among the Polish isolates and MIC values for this antibiotic did not exceed 1.0 microg/ml. The results of the present study confirmed that Polish B. hyodysenteriae isolates were susceptible to the main antibiotics (tiamulin and valnemulin) used in treatment of swine dysentery. Further studies are necessary to evaluate a possible slow decrease in susceptibility to tiamulin and valnemulin of B. hyodysenteriae strains in Poland.

  3. Surface qualities after chemical-mechanical polishing on thin films

    International Nuclear Information System (INIS)

    Fu, Wei-En; Lin, Tzeng-Yow; Chen, Meng-Ke; Chen, Chao-Chang A.

    2009-01-01

    Demands for substrate and film surface planarizations significantly increase as the feature sizes of Integrated Circuit (IC) components continue to shrink. Chemical Mechanical Polishing (CMP), incorporating chemical and mechanical interactions to planarize chemically modified surface layers, has been one of the major manufacturing processes to provide global and local surface planarizations in IC fabrications. Not only is the material removal rate a concern, the qualities of the CMP produced surface are critical as well, such as surface finish, defects and surface stresses. This paper is to examine the CMP produced surface roughness on tungsten or W thin films based on the CMP process conditions. The W thin films with thickness below 1000 nm on silicon wafer were chemical-mechanical polished at different down pressures and platen speeds to produce different surface roughness. The surface roughness measurements were performed by an atomic force microscope (DI D3100). Results show that the quality of surface finish (R a value) is determined by the combined effects of down pressures and platen speeds. An optimal polishing condition is, then, possible for selecting the down pressures and platen speeds.

  4. Preparation of cerium oxide for lens polishing powder

    International Nuclear Information System (INIS)

    Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

    2003-10-01

    Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

  5. Knowledge of chronic total occlusion among Polish interventional cardiologists.

    Science.gov (United States)

    Bryniarski, Krzysztof L; Zabojszcz, Michał; Dębski, Grzegorz; Marchewka, Jakub; Legutko, Jacek; Surowiec, Sławomir; Siudak, Zbigniew; Żmudka, Krzysztof; Dudek, Dariusz; Bryniarski, Leszek

    2015-01-01

    Chronic total occlusion (CTO) recanalization is indicated in patients with symptoms and evidence of ischemia, but in most cases those types of lesions are still treated medically. In the last few years CTO angioplasty technique has changed dramatically due to considerable advances in techniques and dedicated equipment. An attempt to assess the state of knowledge of technical aspects of CTO angioplasty of coronary arteries among Polish interventional cardiologists. Questionnaire survey performed during two major Polish invasive cardiology workshops. In the study there participated 113 physicians with an average length of work experience of 13 years, most of them cardiologists certified as independent primary operators. The majority of respondents recognized the need of prevention of thrombotic complications through control of activated coagulation time during the CTO procedures. Prevention of renal complications and X-ray protection are also recognized as a significant part of the procedures. The benefits from the use of over-the-wire microcatheters and balloons, the proper choice of dedicated guidewires, contralateral injections and retrograde technique are underestimated. Despite satisfactory knowledge about indications and qualification for the CTO procedure, the awareness of procedural aspects (particularly the retrograde technique) as well as the dedicated CTO equipment among Polish interventional cardiologists is still insufficient.

  6. The ministers of the Concertación de Partidos por la Democracia in Chile. An analysis of their political, social and cultural capital

    Directory of Open Access Journals (Sweden)

    Hernán CUEVAS

    2015-12-01

    Full Text Available In this article we analyze the political trajectories of 106 former ministers (of a total of 143 who held office during the governments of the Concertación de Partidos por la Democracia between 1990 and 2010. Based on a survey applied to this total, we first measured the political, social and cultural capital of each individual, then calculated each capital’s effect on the probability of individuals becoming a minister of a political, a social or an economic Ministry. Different from other recent studies of the Chilean elite that emphasize its socialization and sociological features, here we constructed separate indices of political capital, social capital and cultural capital to measure and explain how «ministrable» politicians become ministers. Each index has been standardized for the sake of cross-comparison. We conclude that despite the relevance given to technical expertise over politics, political capital is the factor that has the most influence on the probability of individuals becoming ministers of political, social or economic Ministries. Through a logistic regression model and a survival analysis model, we demonstrated that, although academic formation and social background seem relevant, these aspects are less determinant than the political trajectories of individuals, which demonstrated the most robust predictor of becoming a minister.

  7. Factors Which Influenced the Success of the Implementation of the Regulation of the Minister of Home Affairs Number 59 of 2007 in North Sumatera Provincial Government

    Directory of Open Access Journals (Sweden)

    Amar Rinanda Lubis

    2016-06-01

    Full Text Available This study aimed to test empirically and analyze the influence of regulation, commitment, human resources and supporting devices to the successful implementation of the Regulation of the Minister of Home Affairs No.59 Year 2007. Population in this study is SKPD Officer of North Sumatra Province (108 people which was sampled for 93 people. Simultaneous F test and partial t test were used to studies effects of regulation, commitment, human resources and supporting facilities to the successful implementation of the Regulation of the Minister of Home Affairs No. 59, year 2007. These results prove that the regulation, commitment, human resources and supporting devices simultaneously influenced the successful implementation of the Regulation of the Minister of Home Affairs No. 59 Year 2007. In partial, regulation, commitment and human resources affected successful implementation of the Regulation of the Minister of Home Affairs No. 59 Year 2007, while the supporting facilities did not have an effect. These results showed that 48% variations of successful implementation of the Regulation of the Minister of Home Affairs No.59 Year 2007, depended on variable of regulation, commitment, human resources and supporting facilities and the remaining 52% depended on other uninvestigated variables.

  8. Can Reduced-Step Polishers Be as Effective as Multiple-Step Polishers in Enhancing Surface Smoothness?

    Science.gov (United States)

    Kemaloglu, Hande; Karacolak, Gamze; Turkun, L Sebnem

    2017-02-01

    The aim of this study was to evaluate the effects of various finishing and polishing systems on the final surface roughness of a resin composite. Hypotheses tested were: (1) reduced-step polishing systems are as effective as multiple-step systems on reducing the surface roughness of a resin composite and (2) the number of application steps in an F/P system has no effect on reducing surface roughness. Ninety discs of a nano-hybrid resin composite were fabricated and divided into nine groups (n = 10). Except the control, all of the specimens were roughened prior to be polished by: Enamel Plus Shiny, Venus Supra, One-gloss, Sof-Lex Wheels, Super-Snap, Enhance/PoGo, Clearfil Twist Dia, and rubber cups. The surface roughness was measured and the surfaces were examined under scanning electron microscope. Results were analyzed with analysis of variance and Holm-Sidak's multiple comparisons test (p One-gloss, Enamel Plus Shiny, and Venus Supra groups. (1) The number of application steps has no effect on the performance of F/P systems. (2) Reduced-step polishers used after a finisher can be preferable to multiple-step systems when used on nanohybrid resin composites. (3) The effect of F/P systems on surface roughness seems to be material-dependent rather than instrument- or system-dependent. Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017). © 2016 Wiley Periodicals, Inc.

  9. Política e burocracia no presidencialismo brasileiro: o papel do Ministério da Fazenda no primeiro governo Fernando Henrique Cardoso

    Directory of Open Access Journals (Sweden)

    Loureiro Maria Rita

    1999-01-01

    Full Text Available Enfatizando as relações entre política e burocracia na recente experiência democrática no Brasil, o artigo analisa os critérios de escolha dos ministros e da alta burocracia do Ministério da Fazenda no primeiro governo de Fernando Henrique Cardoso. A escolha desse ministério justifica-se não só por sua posição de relevo no interior do governo, nesta era de estabilização monetária e ajuste fiscal, mas igualmente porque ele sempre foi visto como um ministério mais técnico e imune às pressões do restante do sistema político.

  10. “‘Need a Minister? How About Your Brother?’: The Universal Life Church between Religion and Non-Religion”

    Directory of Open Access Journals (Sweden)

    Dusty Hoesly

    2015-10-01

    Full Text Available National media outlets have observed that weddings in the United States, especially for young educated people, are increasingly performed by ministers who are friends or relatives of the couple and who become ordained online just for that purpose. The primary organization licensing these ministers, and thus authorizing these weddings as legally valid, is the Universal Life Church (ULC, which has ordained over 20 million people since 1962. To date, there has been no focused study of the ULC or lifecycle rituals conducted under its auspices. According to my original survey, interview, and participant observation data, both ULC ministers and the couples who engage them typically self-describe as non-religious, usually as spiritual, seekers, humanist, or generically “not religious.” Similarly, they describe their weddings in “non-religious” terms, emphasizing the personalization of the ceremony to match their particular beliefs and tastes as well as the conscious exclusion of most “religious” language. These “secular” or “spiritual” wedding ceremonies reveal non-religious couples’ desires for an alternative apart from bureaucratic civil ceremonies or traditional religious rites. This article explains why “secular” people select ULC ministers for their weddings, how ULC ministers see themselves as “non-religious” while being members of a legally-recognized religion, and how ULC ministers and couples married by them label and valuate their “non-religious,” personalized wedding ceremonies. My examination of ULC membership and weddings reveals not only the diversity of non-theistic self-identification and lifecycle ritualization, but also how constructs such as “religious” and “secular” can be co-constitutive rather than purely oppositional.

  11. Health-resort fee and a stay in a health-resort hospital – comments based on the general interpretation of the Minister of Finance

    Directory of Open Access Journals (Sweden)

    Jacek Wantoch-Rekowski

    2016-03-01

    Full Text Available The publication presents the argumentation of the Minister of Finance included in the general interpretation of 3 October 2014 concerning the interpretation of Article 17 paragraph 2 clause 2 of the Act on Local Taxes and Fees. It was explained what was understood by the term “hospital” before 3 October 2014 and what changed in this subject after the general interpretation of the Minister of Finance was issued. It was emphasized that now the health-resort fee should not be charged from legal persons staying in health resort hospitals.

  12. Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2015-11-01

    Full Text Available Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary The paper discusses the presentation of neologisms in the recent version of the Bulgarian-Polish digital dictionary. We also continue the discussion of important problems related to the classifiers of the verbs as headwords of the digital dictionary entries. We analyze some examples from ongoing experimental version of the Bulgarian-Polish digital dictionary.

  13. Poland, a workforce in transition: Exploring leadership styles and effectiveness of Polish vs. Western expatriate managers

    OpenAIRE

    Eisenberg, Jacob; Pieczonka, Artur; Eisenring, Martin; Mironski, Jacek

    2015-01-01

    Given the cultural differences between Western Europe and Poland, differences are expected in leadership styles and behaviours between Polish and Western managers. Our study explored Polish employees’ perceptions and attitudes toward expatriate Western versus local managers. The main method was surveying Polish employees working under Western managers in three mid-size companies. We supplemented the survey with in-depth interviews with five West European middle managers working in Poland. We ...

  14. An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

    OpenAIRE

    Sun, Chen; Adhikari, Koushik; Koppel, Kadri

    2015-01-01

    The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA) question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, incl...

  15. Composite adaptive control of belt polishing force for aero-engine blade

    Science.gov (United States)

    Zhsao, Pengbing; Shi, Yaoyao

    2013-09-01

    The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and

  16. How to Investigate Polish Clusters’ Attractiveness for Inward FDI? Addressing Ambiguity Problem

    Directory of Open Access Journals (Sweden)

    Götz Marta

    2014-09-01

    Full Text Available The aim of the paper is to assess whether, and in what fashion, managers of Polish cluster organizations perceive the attractiveness of foreign direct investment in Polish clusters This research is exploratory and qualitative in nature. The complex nature of Polish clusters, which can benefit from and be competitively challenged by, FDI are identified and a conceptual framework for assessing that nature is proposed; specifically, research using the grounded theory method (GTM.

  17. Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

    OpenAIRE

    Gerda Vaitkūnaitė; Vladislav Markovič; Olegas Černašėjus

    2015-01-01

    The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS) method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treat...

  18. Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Bissacco, Giuliano

    2015-01-01

    Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

  19. Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography.

    Science.gov (United States)

    Fischer, N G; Tsujimoto, A; Baruth, A G

    2018-03-16

    Limited information is available on how to polish and finish zirconia surfaces following computer-aided design/computer-aided manufacturing (CAD/CAM), specifically, how differing application forces and reuse of zirconia polishing systems affect zirconia topography. To determine the effect of differing, clinically relevant, polishing application forces and multiple usages of polishing burs on the surface topography of CAD/CAM zirconia. One hundred twenty 220-grit carbide finished zirconia disks were sintered according to manufacturer's directions and divided into two groups for the study of two coarse polishing bur types. Each group was divided into subgroups for polishing (15,000 rpm) at 15 seconds for 1.0 N, 4.5 N, or 11 N of force using a purpose-built fixture. Subgroups were further divided to study the effects of polishing for the first, fifth, 15th, and 30th bur use, simulating clinical procedures. Unpolished surfaces served as a control group. Surfaces were imaged with noncontact optical profilometry (OP) and atomic force microscopy (AFM) to measure average roughness values (Ra). Polishing burs were optically examined for wear. Scanning electron microscopy (SEM) was performed on burs and zirconia surfaces. One-way ANOVA with post hoc Tukey HSD (honest significant difference) tests (α=0.05) were used for statistical analyses. AFM and OP Ra values of all polished surfaces were significantly lower than those of the unpolished control. Different polishing forces and bur reuse showed no significant differences in AFM Ra. However, significant differences in OP Ra were found due to differing application forces and bur reuse between the first and subsequent uses. SEM and optical micrographs revealed notable bur wear, increasing with increasing reuse. SEM and AFM micrographs clearly showed polished, periodic zirconia surfaces. Nanoscale topography, as analyzed with kurtosis and average groove depth, was found dependent on the specific polishing bur type. These in

  20. Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

    2016-01-01

    The applicability of acoustic emission (AE) measurements for in-process monitoring of surface generation in the robot-assisted polishing (RAP) was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate...... automatic detection of optimal process endpoint allow intelligent process control, creating fundamental elements in development of robust fully automated RAP process for its widespread industrial application....... removal of the part from the machine tool. In this study, stabilisation of surface roughness during polishing rotational symmetric surfaces by the RAP process was monitored by AE measurements. An AE sensor was placed on a polishing arm in direct contact with a bonded abrasive polishing tool...

  1. Surface analysis of polished fused-silica laser lenses by ion-scattering spectrometry

    International Nuclear Information System (INIS)

    Orvek, K.; Steward, S.A.

    1982-01-01

    New advances in high-powered glass lasers, particularly the NOVA system, have resulted in a need for lenses having higher damage threshold values than those now available. It is currently thought that surface contaminants on the lenses are responsible for initiating part of the damage. These contaminants are apparently introduced during the final polishing stages. In this study, we used ion-scattering spectrometry (ISS) to identify contaminants arising through the use of different polishing techniques. Five lenses were studied, each having undergone different polishing procedures. The first lens was not polished after receiving it from the manfacturer (No. 381). Ion microprobe data were available for this lens, and they were compared to ISS results. The second lens had been polished with rouge, a polishing compound no longer in use (No. 796). This sample served as a further check on the ISS results. The third lens was studied as received from the manufacturer - with no handling or cleaning (No. 802). The final two lenses had both been polished using high-purity ceria, cerium oxide (No. 800 and No. 801). The difference between these two was that No. 800 was polished using a nylon lap, and No. 801 was polished using pitch as a lap. The 800-series lenses were all made from the same batch, and constituted the major part of the investigation

  2. Damage-free polishing of monocrystalline silicon wafers without chemical additives

    International Nuclear Information System (INIS)

    Biddut, A.Q.; Zhang, L.C.; Ali, Y.M.; Liu, Z.

    2008-01-01

    This investigation explores the possibility and identifies the mechanism of damage-free polishing of monocrystalline silicon without chemical additives. Using high resolution electron microscopy and contact mechanics, the study concludes that a damage-free polishing process without chemicals is feasible. All forms of damages, such as amorphous Si, dislocations and plane shifting, can be eliminated by avoiding the initiation of the β-tin phase of silicon during polishing. When using 50 nm abrasives, the nominal pressure to achieve damage-free polishing is 20 kPa

  3. Macroeconomic, legal, administrative and cultural factors of technological innovations1 in Polish industrial enterprises

    Directory of Open Access Journals (Sweden)

    Stanisław Sudoł

    2016-12-01

    The vast majority of experts participating in the study positively assessed the cultural conditions of technological innovativeness in Polish enterprises. Experts also provided negative cultural characteristics of Poles.

  4. Reseau Environnement's brief on the project regarding atmospheric regulations : submitted to the Minister of Sustainable Development, Environment and Parks

    International Nuclear Information System (INIS)

    2006-01-01

    Reseau Environnement is a Montreal-based organization that promotes the protection of ecosystems and human health. Their mandate is to extend the existing standards for reducing pollutants and to tap the full potential of Quebec expertise in addressing pollution sources. Reseau Environnement recently appealed to the Quebec Minister of Sustainable Development, Environment and Parks to develop clear, flexible and modern regulations for Quebec, similar to those found in Europe and the United States, to efficiently control atmospheric emissions in an effort to counteract the negative effects they impart on ecosystems and human health. Among the requests was the revision of certain pollution regulation clauses to regulate odor emissions; identify preferred measuring methods for pollutants; apply ambient air quality standards to existing installations; apply standards for particulates; impose requirements for the frequency of pollution sampling and make changes to some components of Montreal's Regulation 90 regarding air pollution from industrial activities. 13 refs

  5. 'Nice girls don't carry knives': constructions of ambition in media coverage of Australia's first female prime minister.

    Science.gov (United States)

    Hall, Lauren J; Donaghue, Ngaire

    2013-12-01

    Julia Gillard became the first female prime minister of Australia in 2010. This paper examines the various ways in which her success was constructed in the Australian print media in the days immediately following her elevation. In particular, we focus on how an issue that has long beset women aspiring to power and leadership - the so-called 'double bind' in which aspiring women leaders must display high competence and ambition in traditionally masculine domains while maintaining sufficient femininity so as not to be disliked - was constructed in this high-profile instance. We discuss the coverage in terms of its implications for the need to create an androgynized presentation of ambition, the continuing relevance of gender stereotypes, and the mixture of threat and opportunity provided to women taking positions on 'the glass cliff'. These issues remain crucially important for women aspiring to power and leadership in contemporary western societies. © 2012 The British Psychological Society.

  6. "Never mind the logic, give me the numbers": former Australian health ministers' perspectives on the social determinants of health.

    Science.gov (United States)

    Baum, Frances E; Laris, Paul; Fisher, Matthew; Newman, Lareen; Macdougall, Colin

    2013-06-01

    The articulation of strong evidence and moral arguments about the importance of social determinants of health (SDH) and health equity has not led to commensurate action to address them. Policy windows open when, simultaneously, an issue is recognised as a problem, policy formulation and refinement happens and the political will for action is present. We report on qualitative interviews with 20 former Australian Federal, State or Territory health ministers conducted between September 2011 and January 2012 concerning their views about how and why the windows of policy opportunity on the SDH did or did not open during their tenure. Almost all ex-health ministers were aware of the existence of health inequalities and SDH but their complexity meant that this awareness rarely crystalised into a clear problem other than as a focus on high needs groups, especially Aboriginal people. Formulation of policies about SDH was assisted by cross-portfolio structures, policy entrepreneurs, and evidence from reviews and reports. It was hindered by the complexity of SDH policy, the dominance of medical power and paradigms and the weakness of the policy community advocating for SDH. The political stream was enabling when the general ideological climate was supportive of redistributive policies, the health care sector was not perceived to be in crisis, there was support for action from the head of government and cabinet colleagues, and no opposition from powerful lobby groups. There have been instances of Australian health policy which addressed the SDH over the past twenty five years but they are rare and the windows of opportunity that made them possible did not stay open for long. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. International Trade and Economic Growth in the Polish Economy

    Directory of Open Access Journals (Sweden)

    Henryk Gurgul

    2010-01-01

    Full Text Available The paper presents the results of examinations of linear and nonlinear causalities performed for international trade involving the Polish economy and its economic growth. In order to infer the impact of the world crisis on the Polish economy, two samples have been studied (containing quarterly data – a full sample (Q1 1996–Q3 2009 and pre-crisis sample (Q1 1996–Q3 2008. The results of linear causality tests support the existence of feedback between the growth rate of exports and growth in gross domestic product (GDP irrespectively of the time period chosen. For both the samples examined, no direct causal links between the growth rates of GDP and imports were detected. One can only suppose the existence of indirect links before the crisis. Bidirectional causality was found for growth rates of exports and imports only for the pre-crisis sample. Some weak evidence of a causal link running from the growth rate of imports to the growth rate of exports was also found for the period that covers the crisis, which may be interpreted as a confirmation of the fact that growth in imports also precedes growth in exports in bullish periods. It results from our computations that, at the time of the financial crisis of 2008, the main factor that caused Polish GDP growth to remain positive was domestic demand. The results of nonlinear causality analysis provided only weak evidence for causality running from GDP to exports, from GDP to imports and from imports to exports. (original abstract

  8. Analysis of the Motor Activities of Professional Polish Soccer Players

    Directory of Open Access Journals (Sweden)

    Andrzejewski Marcin

    2016-12-01

    Full Text Available Introduction. The aims of the present study were to determine the activity profiles of a large sample of Polish Premier League soccer players during elite-standard soccer matches depending on their position on the pitch and the intensity range of physical activity. Material and methods. The study sample comprised 1,178 players in 5 outfield positions: external defenders (ED, n = 289, central defenders (CD, n = 307, central midfield players (CM, n = 327, external midfield players (EM, n = 152, and forwards (F, n = 103. Altogether, 81 Polish League games held during four domestic seasons (2010-2011, 2011-2012, 2012-2013, and 2013-2014 were used in the analysis. A semi-automatic computerised player tracking system (Amisco Pro®, version 1.0.2, Nice, France was applied to create the match activity profiles of the teams. Results. The results of statistical analysis revealed that the average total distance covered by all the players (n = 1,178 was 11,313 ± 852 m. With respect to the players’ position on the pitch, the central midfielders travelled the longest average distance (11,894 ± 765 m during the game. The longest distance was covered in the V1 intensity range (62%, followed by V2 (15%, V3 (10%, V4 (8%, V5 (3%, and V6 (2%. Conclusions. The objective of this study was to verify the differences among playing positions and to quantify the demands placed on elite Polish soccer players in each individual position during match play. While analysing elite-level match play in terms of the overall distance covered in different categories of intensity, we found a number of statistically significant differences between different playing positions. The data presented in this study can be regarded as norms for elite soccer players, serve for present and future comparison, and represent the scientific basis for developing position-specific conditioning/training protocols in soccer.

  9. Polish Code of Ethics of a Medical Laboratory Specialist.

    Science.gov (United States)

    Elżbieta, Puacz; Waldemar, Glusiec; Barbara, Madej-Czerwonka

    2014-09-01

    Along with the development of medicine, increasingly significant role has been played by the laboratory diagnostics. For over ten years the profession of the medical laboratory specialist has been regarded in Poland as the autonomous medical profession and has enjoyed a status of one of public trust. The process of education of medical laboratory specialists consists of a five-year degree in laboratory medicine, offered at Medical Universities, and of a five-year Vocational Specialization in one of the fields of laboratory medicine such as clinical biochemistry, medical microbiology, medical laboratory toxicology, medical laboratory cytomorphology and medical laboratory transfusiology. An important component of medical laboratory specialists' identity is awareness of inherited ethos obtained from bygone generations of workers in this particular profession and the need to continue its further development. An expression of this awareness is among others Polish Code of Ethics of a Medical Laboratory Specialist (CEMLS) containing a set of values and a moral standpoint characteristic of this type of professional environment. Presenting the ethos of the medical laboratory specialist is a purpose of this article. Authors focus on the role CEMLS plays in areas of professional ethics and law. Next, they reconstruct the Polish model of ethos of medical diagnostic laboratory personnel. An overall picture consists of a presentation of the general moral principles concerning execution of this profession and rules of conduct in relations with the patient, own professional environment and the rest of the society. Polish model of ethical conduct, which is rooted in Hippocratic medical tradition, harmonizes with the ethos of medical laboratory specialists of other European countries and the world.

  10. Congress of the Polish Chamber of Tourism - Egypt 2017

    Directory of Open Access Journals (Sweden)

    Marek Napierała

    2017-12-01

    Full Text Available The aim of the article is to assess the effectiveness of the Congress of the Polish Chamber of Tourism 2017 in the elaboration of joint applications regarding the provision of substantive and logistical support to entrepreneurs as well as the pursuit of comprehensive regulation of tourism law; adaptation of Polish law to European standards. Research problems: What is the legal status in the field of tourism law regarding outgoing tourism, incoming tourism and MICE, children and youth tourism, domestic tourism and accommodation facilities, travel agents and air transport? What are the main problems of the industries and what are their solutions proposed? What is the position and conclusions of the Congress? Research methods: study of documents, source materials, study of Congress materials, interviews with participants of the Congress, personal participation in the Congress. The PIT Congress took place on 25.11. - 2.12.2017 in Egypt (Marsa Alam: "Groundbreaking changes in tourism law: challenges and problems". The aim of the Congress was to develop a common position in the field of tourism law on outgoing tourism, incoming tourism and MICE, children and youth tourism, domestic tourism and accommodation facilities, travel agents and air transport. PIT is the largest nationwide organization of the economic self-government of the tourism industry. Polish Chamber of Tourism, which is a full member of the European Union of Travel Agencies of the European Union (ECTAA. From the beginning of its existence (25 years of activity, it has been successfully applying for a new shape of tourist business in Poland. Conclusions: - trainings should be carried out using the latest laws, - substantive and logistical support should be provided to entrepreneurs, - strive for comprehensive regulation of tourism law, - tourism needs a host so that it can be prioritized as an important branch of the economy.

  11. THE EFFECTIVENESS OF INNOVATION PROJECTS IN POLISH INDUSTRY

    Directory of Open Access Journals (Sweden)

    Jan Zwolak

    2016-03-01

    Full Text Available The objective of the study was to determine the dependency of the net income from the sales of new and significantly modernised products on the expenditure on (1 marketing and staff training as well as on the expenditure on (2 land, buildings and structures; machinery, technical equipment and tools; and means of transportation within the scope of product and process innovations in Polish industry in 2010. Furthermore the study was intended to determine the effectiveness of the abovementioned expenditure aggregated to descriptive variables (1 and 2. In the study, the correlation and regression methods as well as the least squares method was applied.The estimation resulted in the determination of functional dependency of net sales income on the expenditure on marketing and staff training (0.5040 as well as on the expenditure on land, buildings and structures; machinery, technical equipment and tools; and means of transportation (0.8064 in the field of innovative processes in industry. The net sales income increased more than proportionally relative to the combined effect of the aforementioned expenditure (1.3104. The total increase in the aforementioned expenditure by 10% resulted in the increase in net sales income by 13.1%. The determined power regression model may have practical implications for the economic evaluation of expenditure in innovative processes in Polish industry in the future, as well as for the forecast (prediction.The expenditure application in innovative processes may also have social implications connected to the increase in the value-in-use of products and with the increase in the social efficiency of work in Polish industry.

  12. Database for content of mercury in Polish brown coal

    Science.gov (United States)

    Jastrząb, Krzysztof

    2018-01-01

    Poland is rated among the countries with largest level of mercury emission in Europe. According to information provided by the National Centre for Balancing and Management of Emissions (KOBiZE) more than 10.5 tons of mercury and its compounds were emitted into the atmosphere in 2015 from the area of Poland. Within the scope of the BazaHg project lasting from 2014 to 2015 and co-financed from the National Centre of Research and Development (NCBiR) a database was set up with specification of mercury content in Polish hard steam coal, coking coal and brown coal (lignite) grades. With regard to domestic brown coal the database comprises information on coal grades from Brown Coal Mines of `Bełchatów', `Adamów', `Turów' and `Sieniawa'. Currently the database contains 130 records with parameters of brown coal, where each record stands for technical analysis (content of moisture, ash and volatile particles), elemental analysis (CHNS), content of chlorine and mercury as well as net calorific value and combustion heat. Content of mercury in samples of brown coal grades under test ranged from 44 to 985 μg of Hg/kg with the average level of 345 μg of Hg/kg. The established database makes up a reliable and trustworthy source of information about content of mercury in Polish fossils. The foregoing details completed with information about consumption of coal by individual electric power stations and multiplied by appropriate emission coefficients may serve as the background to establish loads of mercury emitted into atmosphere from individual stations and by the entire sector of power engineering in total. It will also enable Polish central organizations and individual business entities to implement reasonable policy with respect of mercury emission into atmosphere.

  13. Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis.

    Science.gov (United States)

    Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu

    2016-12-01

    Polishing procedures might alter monolithic zirconia (MZ) surface resulting in phase changes that can be deleterious for clinical performance and antagonist tooth wear. This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​ MZ specimens (Katana Zirconia HT, Kuraray-Noritake) (12×12×1.8 mm(3)) were grinded and polished using one of the five systems assessed: BG: Silicone carbide polishers (Brownie, Greenie, Super Greenie); CG: Diamond impregnated ceramic polisher kit (Ceragloss); EV: Synthetically bonded grinder interspersed with diamond (EVE Kit); SL: Urethane coated paper with aluminium oxide grits (Soflex Finishing and Polishing System Kit) and DB: Diamond bur (8 µm). Polished specimens were initially roughened with 220 µm diamond burs (Grinding Bur-GB) (10 s, 160.000160,000 rpm) and considered for baseline measurements. Polishing regimens were performed for 10 s using a slow-speed hand piece under water-cooling except for SL, in a custom made device (750 g; 5000 and 75,000 rpm). Surface roughnesses, phase changes (XRD) were assessed, surface characterization was performed (SEM, EDS). The highest roughness was obtained with the EV system (1.11 µm) compared to those of other systems (0.13-0.4 µm) (pθ and minor peak at 34.94°2θ. While GB, CG, EV, SL and DB exhibited a peak shift to the left, BG demonstrated a right peak shift on the 2θ scale. Monoclinic phase change was not noted in any of the groups. All polishing methods, except BG, exhibited a peak shift towards the lower angles of the 2-theta scale. Since the peak shifts were in the order of fractions of an angle they are attributed to stress formation rather than a phase change in the material. Thus, all polishing systems tested may not be detrimental for the phase transformation of MZ. EV system resulted in the highest roughness and none of the polishing regimens restored the polishability to the

  14. Rights and obligations of communal enterprises under Polish administrative law

    International Nuclear Information System (INIS)

    Filipek, J.

    1992-01-01

    The paper elucidates the legal environment in which Polish power producing and distributing enterprises operate. In particular, the different forms of communal enterprises are described: public owned companies; public owned companies serving ''higher purposes''; communal enterprises operating on the strength of special laws; forms of organization subject to private law. Over the long term the rules in the sphere of the communal economy can be simplified. As the administrative judiciary develops, comprehensive administrative surveillance will become superfluous. The communal enterprises render their services to the citizen. The legal remedies at the citizen's disposal are the administrative complaint and the appeal to the administrative courts. (orig./HSCH) [de

  15. RISK IDENTIFICATION TOOLS – POLISH MSMES COMPANIES PRACTICES

    Directory of Open Access Journals (Sweden)

    Iwona Gorzeń-Mitka

    2013-07-01

    Full Text Available The purpose of this study is to present risk identification tools in Polish micro, small and medium-sized enterprises (MSMEs. Risk identification is a key element of the risk management process in companies. Correctly fitting risk identification tools affect the accuracy of management decisions. The result of research is to identify the leading risk identification tools used by MSMEs. The study was conducted in 2010-2012 using a mixed survey-monographic method and questionnaires. The qualitative data were obtained during the study.

  16. Discriminant analysis in Polish manufacturing sector performance assessment

    Directory of Open Access Journals (Sweden)

    Józef Dziechciarz

    2004-01-01

    Full Text Available This is a presentation of the preliminary results of a larger project on the determination of the attractiveness of manufacturing branches. Results of the performance assessment of Polish manufacturing branches in 2000 (section D „Manufacturing” – based on NACE – Nomenclatures des Activites de Communite Europeene are shown. In the research, the classical (Fisher’s linear discriminant analysis technique was used for the analysis of the profit generation ability by the firms belonging to a certain production branch. For estimation, the data describing group level was used – for cross-validation, the classes data.

  17. Theorizing Polish migration across Europe: perspectives, concepts, and methodologies

    Directory of Open Access Journals (Sweden)

    Elżbieta M. Goździak

    2016-08-01

    Full Text Available Theorizing Polish migration across Europe: perspectives, concepts, and methodologies With the focus on the post-2004 mobility of Polish citizens, in this article we discuss two interrelated questions; namely, what are the most productive ways to theorize contemporary Polish migration, and what are the most fruitful methodologies aimed at understanding Polish migration and Poles on the move? In the first part of this article we unpack three interrelated theoretical frameworks: ‘liquid migration’, ‘regimes of mobility,’ and ‘transnationalism’. The methodological discussion in the second part of the article focuses mainly on outlining and contextualizing the most common approaches to migration phenomena. By critically introducing quantitative and qualitative methodologies, we explore and indicate the advantages of the ethnographic perspective and the merits and predicaments of research engagement in multiple sites.   Polskie migracje w Europie: perspektywy, koncepcje, metodologie Z naciskiem na mobilność obywateli polskich po przyłączeniu Polski do Unii Europejskiej w 2004 roku, w niniejszym artykule staramy się odpowiedzieć na dwa powiązane ze sobą pytania: jakie są najbardziej wydajne sposoby teoretyzowania współczesnej migracji polskiej oraz jakie są najbardziej owocne metody badawcze mające na celu zrozumienie polskiej migracji po akcesji do UE? W pierwszej części artykułu przedstawiamy więc trzy powiązane ze sobą koncepcje teoretyczne: „płynna migracja”, „reżimy mobilności” oraz transnarodowość. Dyskusja metodologiczna w drugiej części artykułu skupia się natomiast głównie na przedstawieniu najczęściej stosowanej metodyki i metodologii w badaniach zjawisk migracyjnych. Wprowadzając krytyczną perspektywę na temat ilościowych i jakościowych metod badawczych, staramy się wskazać wartość poznawczą perspektywy etnograficznej oraz wady i zalety etnograficznego zaangażowania badawczego w

  18. Circular motion and Polish Doughnuts in NUT spacetime

    Science.gov (United States)

    Jefremov, Paul I.

    The astrophysical relevance of the NUT spacetime(s) is a matter of debate due to pathological properties exhibited by this solution. However, if it is realised in nature, then we should look for the characteristic imprints of it on possible observations. One of the major sources of data on black hole astrophysics is the accretion process. Using a simple but fully analytical ``Polish Doughnuts'' model of accretion disk one gets both qualitative and quantitative differences from the Kerr spacetime produced by the presence of the gravitomagnetic charge. The present paper is based on our work Jefremov & Perlick (2016).

  19. Advanced ion exchange resins for PWR condensate polishing

    International Nuclear Information System (INIS)

    Hoffman, B.; Tsuzuki, S.

    2002-01-01

    The severe chemical and mechanical requirements of a pressurized water reactor (PWR) condensate polishing plant (CPP) present a major challenge to the design of ion exchange resins. This paper describes the development and initial operating experience of improved cation and anion exchange resins that were specifically designed to meet PWR CPP needs. Although this paper focuses specifically on the ion exchange resins and their role in plant performance, it is also recognized and acknowledged that excellent mechanical design and operation of the CPP system are equally essential to obtaining good results. (authors)

  20. Specificity of Geotechnical Measurements and Practice of Polish Offshore Operations

    Directory of Open Access Journals (Sweden)

    Bogumil Laczynski

    2015-12-01

    Full Text Available As offshore market in Europe grows faster and faster, new sea areas are being managed and new ideas on how to use the sea potential are being developed. In North Sea, where offshore industry conducts intensive expansion since late 1960s, numerous wind farms, oil and gas platforms and pipelines have been put into operation following extensive research, including geotechnical measurement. Recently, a great number of similar projects is under development in Baltic Sea, inter alia in Polish EEZ, natural conditions of which vary from the North Sea significantly. In this paper, those differences are described together with some solutions to problems thereby arising.

  1. Polish Decadence: Leopold Staff's Igrzysko in the European Context

    Directory of Open Access Journals (Sweden)

    Julia Przybos

    2012-03-01

    expression. It is my hypothesis that taken out of its secular context, religious revisionism of the kind practiced by French decadents may be seen as shocking transgression in a fiercely catholic country like Poland. In the country that lost its independence in 1794 and was ever since seeking to regain it, Catholic Church was perceived as an essential ally in the struggle against main occupying powers: Orthodox Russia, and Protestant Prussia. In the course of the 19th century Catholicism and patriotism had been effectively fused in Polish national conscience. In this charged political context a Polish author revisiting Church dogma or tradition was at risk of being perceived not only as a religious outcast but also as a traitor to the cause of Polish independence. To test my hypothesis I propose to examine Igrzysko (Game, a forgotten play by Leopold Staff. Admired today chiefly as a poet, the young Staff wrote Igrzysko in Poland after a long sojourn in Paris where he had lived among the international crowd of fin de siècle writers and artists. The play was first produced in Lemberg in 1909 and after a few performances vanished forever from Polish theatrical repertoire. Leopold Staff's play is set in ancient Rome and depicts tribulations of an actor who, while impersonating a Christian awaiting crucifixion, converts to Christianity. In his play, Staff revives the legend of Saint Genesius, an actor in Arles who died a martyr's death in 286 under Diocletian. In Spain, Saint Genesius's legend inspired Lope de Vega who wrote Acting is Believing (Lo fingido verdadero, 1607. In France, it was the source for Jean Rotrou's Saint Genest (1646. All told, the legend of Genesius is a popular theme for artists who wish to explore the distinction between art and life. An important addition to this old tradition, Staff's play contains, however, a decadent and potentially scandalous twist. Unlike in Acting is Believing and Saint Genest, the protagonist's conversion is very short

  2. Condensate polisher application for PWR steam generator corrosion control

    International Nuclear Information System (INIS)

    Sawochka, S.G.; Leibovitz, J.; Siegwarth, D.P.; Pearl, W.L.

    1981-01-01

    The evolution of corrosion attack modes particularly in recirculating U-tube PWR steam generators has dictated a thorough review of the advantages and disadvantages of condensate polishing. Analytical modeling techniques to qualitatively predict crevice chemistry variations resulting from steam generator bulk water variations have allowed valuable insights to be developed. Modeling results complemented by steam generator and laboratory corrosion data will be employed to set condensate demineralizer effluent specifications consistent with control of steam generator corrosion. Laboratory and plant studies are being performed to demonstrate achievability of necessary effluent specifications. (author)

  3. Between positivism and narrativism in Polish methodology of history

    OpenAIRE

    Brzechczyn, Krzysztof

    2013-01-01

    This paper has two main purposes. Its primary purpose is to present the reception of the discussion between positivism and narrativism in the Polish methodology of history. A secondary one is to paraphrase, using the notion apparatus of the idealisational theory of science, the issue of the accuracy of explanation. The article consists of six parts. In the first part, Hempel’s deductive-nomological (or covering-law) model of explanation is presented. In the second part, the main tenets and as...

  4. 9 June 2016 - British Foreign and Commonwealth Office, Minister of State H. Swire MP signing the guest book with CERN Director-General F. Gianotti.

    CERN Multimedia

    Bennett, Sophia Elizabeth

    2016-01-01

    The Rt Hon Hugo Swire MP Minister of State Foreign and Commonwealth Office United Kingdom of Great Britain and Northern Ireland; in the LHC superconducting magnet test hall with Beams Department Head P. Collier and in ATLAS Visitor Centre with ATLAS Collaboration Spokesperson D. Charlton.

  5. Directive of the Minister of Public Health and Environmental Protection of 14 October 1975, Stcrt. 203 in implementation of Section 28 of the Nuclear Energy Act (Devices) Decree

    International Nuclear Information System (INIS)

    1975-01-01

    This Directive lays down the procedure for applications for licences under the Devices Decree. The competent authority in this respect is the Minister of Public Health and Environmental Protection, formerly the State Secretary for Social Affairs and Public Health. (NEA) [fr

  6. 607. Order of 7 December 1989 of the Federal Minister for the Environment, Youth and Family concerning the definition of hazardous wastes

    International Nuclear Information System (INIS)

    1989-01-01

    This Order of the Federal Minister for the Environment, Youth and the Family concerning the definition of hazardous wastes came into effect on 1 January 1990. That definition includes radioactive waste, in terms of the Radiation Protection Act in a list of substances to which the Act of 1989 on the disposal of wastes applies. (NEA)

  7. Communication received from the Federal Minister for European and International Affairs of Austria with regard to the Austrian proposal on the multilateralization of the nuclear fuel cycle

    International Nuclear Information System (INIS)

    2007-01-01

    The Agency has received a communication dated 10 May 2007 from the Federal Minister for European and International Affairs of the Republic of Austria, attaching a paper on the Multilateralization of the Nuclear Fuel Cycle. As requested in that communication, the paper is herewith circulated for the information of Member States

  8. Resolution of the Conference of Ministers of Economics of the German Laender, relating to the act obliging electric utilities to purchase electricity generated from renewable energy sources (Stromeinspeisungsgesetz)

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    The Conference of Ministers welcomes the minimum payment for electricity generated from renewable energy sources as defined in the planned act as a suitable incentive to exploit renewable energy sources, but at the same time regrets that the Federal Government still does not give appropriate support in general to enhanced use of these energy sources. The resolution comprises seven statements. (orig./CB) [de

  9. Patient monitoring in Polish assisted reproductive technology centres

    Directory of Open Access Journals (Sweden)

    Anna Krawczak

    2016-12-01

    Full Text Available In 2014, the Polish non-governmental patient association ‘Our Stork’ (Nasz Bocian introduced the ‘Patient monitoring in ART centres’ research project to gather previously unrecorded information on the situation of infertile people and the provision of assisted reproductive treatment in Poland. When the research project began, assisted reproductive treatment centres were unregulated by the state, a situation that had existed for more than 28 years following the birth of the first Polish test-tube baby in 1987. Patients signed civil contracts, remaining unprotected in terms of safety of treatment and recognition of their rights, and their presumed social position was described by doctors as ‘disciplined patients’ – a reflection of what Michele Foucault described as biopolitics. The research project comprised patient questionnaires (responses from 722 patients provided the basis for the document ‘Patient Recommendations in Infertility Treatment’, analysis of civil contracts and their accuracy in the context of patients’ legal rights in Poland, and in-depth interviews with assisted reproductive treatment centres’ owners, doctors, midwives, and patients to explore patient care. The data reveal that there is a lack of patient-centred care among doctors and medical staff in Poland and that following the passing into law of the 2015 Infertility Act, which introduced state regulation of assisted reproductive treatment centres, the situation for patients worsened.

  10. [The Polish adaptation of the public speaking anxiety questionnaire].

    Science.gov (United States)

    Chodkiewicz, Jan; Miniszewska, Joanna

    2015-01-01

    The aim of the study was the Polish adaptation of the shortened Public Speaking Anxiety Questionnaire GFER by Spitznagel and co-workers. GFER is a self-assessment method which consists of 16 statements and is designed to assess emotions, physiological reactions, and thoughts that appear in a situation of public speaking. GFER was used to examine 320 students from Lodz's universities. The State/Trait Anxiety Inventory - STAI by Spielberger, The Hospital Anxiety and Depression Scale by Zigmunt and Snaith and TCI by Cloninger were also used. The Polish version of GFER is a reliable and valid tool. The factor structure is similar to the original structure. As a result of the conducted analyses, there was obtained the 9-item version of the tool, which has a 2-factor structure - factor I: emotional and physiological reactions, factor II: worrying. The results obtained with GFER present a statistically significant correlation with other measures of anxiety and with the dimension of temperament: harm avoidance. The obtained results indicate that GFER may be used in both scientific research and therapeutic practice.

  11. THE LOW PRICE EFFECT ON THE POLISH MARKET

    Directory of Open Access Journals (Sweden)

    Adam Zaremba

    2014-06-01

    Full Text Available In this paper we investigate the characteristics of the low price anomaly, which implies higher returns to stocks with a low nominal price. The research aims to broaden academic knowledge in a few ways. Firstly, we deliver some fresh evidence on the low price effect from the Polish market. Secondly, we analyze the interdependence between the low price effect and other return factors: value, size and liquidity. Thirdly, we investigate whether the low price effect is present after accounting for liquidity. Fourthly, we check to see whether the low price effect is robust to transaction costs. The paper is composed of three main sections. In the beginning, we review the existing literature. Next, we present the data sources and research methods employed. Finally, we discuss our research findings. Our computations are based on all the stocks listed on the Warsaw Stock Exchange (WSE in the years 2003-2013. We have concluded that the low price effect is present on the Polish market, although the statistical significance is very weak and it disappears entirely after accounting for transaction costs and liquidity.

  12. Professional activity of Polish peri- and postmenopausal women.

    Science.gov (United States)

    Żołnierczuk-Kieliszek, Dorota; Janiszewska, Mariola; Mielniczuk, Agata; Dziedzic, Małgorzata A; Firlej, Ewelina

    2016-11-01

    The menopausal transition as one of the stages in women's life can bring many ailments which complicate the accomplishment of professional duties. The situation of women on the Polish job market is determined by many barriers and stereotypes which impede women's access to jobs and professional promotions. The aim of the study was to estimate the professional status and job satisfaction of women aged 40-65. The research was carried out by a survey method, a poll technique in the period from January to March 2016. An original questionnaire consisting of 35 questions was used as a research tool. The analysis of obtained results shows that the arithmetic mean of the age of women in full-time employment was 51.84 years whereas the arithmetic mean of the age of women in part-time or seasonal employment was 52.64. Women aged 45-60 were characterised by a significantly lower job satisfaction than women over 60 years of age. The highest percentage of women in full-time employment lived in large cities. The financial situation of working women determined their job satisfaction. Well-off respondents were more pleased with their jobs than women in a worse financial situation. There is a strong need of education about counteraction of gender and age discrimination on the Polish labour market. The struggle against discrimination requires support on each level of the state administration through the implementation of numerous regulations facilitating the final period and resumption of women's professional activity.

  13. Influence of Polish Arms, Armour and Militaria on Western Europe

    Directory of Open Access Journals (Sweden)

    Lenkiewicz, Z. S.

    1980-12-01

    Full Text Available Up to approximately the 15th century the arms and the armament of a Polish knight were very similar in style to those used in the west: heavy Armour, heavy sword, and heavy horse. However, in the face of the continuous attacks by Tartars, and later on Turks, on Polish territories, the enemy consisting of very light cavalry, on small but very quick and manageable horses, the heavy knights were of little use. Long before the 15th century the armament and the tactics had to be slowly modified and adapted to the enemy's armament and stratagems.

    Hasta antes del siglo XV, las armas y armamento de los caballeros polacos eran muy similares en estilo a los utilizados en Occidente: una pesada armadura, una pesada espada, un pesado caballo. Sin embargo, frente a los contínuos ataques al territorio polaco, primero de los tártaros y posteriormente de los turcos, utilizando una caballería muy ligera montando caballos de pequeño tamaño pero muy rápidos y manejables, los caballeros tan pesadamente armados eran de poca utilidad. Tácticas y armamento hubieron de adaptarse a las del enemigo. [traducido por la redacción

  14. FOOD SAFETY SYSTEMS’ FUNCTIONING IN POLISH NETWORKS OF GROCERY STORES

    Directory of Open Access Journals (Sweden)

    Paweł NOWICKI

    2013-04-01

    Full Text Available This article shows the way how the food safety systems are functioning in Polish networks of grocery stores. The study was conducted in the fourth quarter of 2012 in the south‐eastern Poland. There were chosen three organizations that meet certain conditions: medium size Polish grocery network without participation of foreign capital and up to 30 retail locations within the group. Studies based on a case study model. The research found that regular and unannounced inspections carried out to each store's, impact on increasing safety of food offered and the verification of GHP requirements on the headquarters level has a significant impact on the safety of food offered as well as on the knowledge and behavior of employees. In addition it was found that the verification and analysis of food safety management system is an effective tool for improving food safety. It was also shown that in most cases there is no formal crisis management system for the food protection in the surveyed companies and employees are only informed of what to do in case of an emergency.

  15. Calibration of a Credit Rating Scale for Polish Companies

    Directory of Open Access Journals (Sweden)

    Aleksandra Wójcicka

    2012-01-01

    Full Text Available Increasing number of bankruptcy announcements means that even greater attention is being paid to the correct evaluation of the probability of default (PD and decisions made on the basis of it. Reliable estimation of the likelihood of a company's bankruptcy reduces risk, not only for the company itself but also for all co-operating companies and financial institutions. The financial crisis has led to a tightening up of the conditions for gaining finance from banks. However, it is not only the evaluation of PD itself that is so important but also the correct classification of companies according to their PD level ("good" or "bad" companies. There is very little consideration about possible adjustments of the credit risk scale, as usually the American scale is adopted with no changes which seems incorrect.This paper stresses the importance of correct calibration of the credit rating scale. It should not be assumed (as it was in the past that once a scale is defined it remains fixed and independent of the country. Therefore, the research carried out on Polish companies shows that the credit rating scale should be changed and the default point (i.e. "cut-off" point should be higher than in the past. The author uses a modified classification matrix based on the probability of default. The paper compares the classification of quoted Polish companies according to their credit risk level (PD with the actual occurrence of default when various default "cut-off" points are used. (original abstract

  16. Endogenous or exogenous origin of vaginal candidiasis in Polish women?

    Science.gov (United States)

    Mnichowska-Polanowskai, Magdalena; Wojciechowska-Koszko, Iwona; Klimowicz, Bogumia; Szymaniak, Ludmia; Krasnodebska-Szponder, Barbara; Szych, Zbigniew; Giedrys-Kalemba, Stefania

    2013-01-01

    Vaginal candidiasis is a common problem of clinical practice. Many studies have been conducted to explain its origin but only a few have included Polish women. The aim of the study was to determine the prevalence and similarity of oral, anal and vaginal Candida albicans strains isolated from Polish women with vaginal candidiasis. The study involved 20 from 37 recruited women. Swab samples were collected from their vagina, anus, and oral cavity at two-month intervals. All the women were treated with nystatin. Yeast were recovered and identified by the germ-tube test, API /Vitek system, typed by API ZYM and RAPD-PCR. Chi-square test was used to analyze the data. A total of 170 Candida albicans isolates were recovered from 180 samples collected 3 times from 3 sites of 20 women. Positive yeast vaginal cultures were found in all patients before administration of nystatin. Vaginal yeast recovery rate was decreased statistically significant in both follow-up visits (p= 0.001; p= 0.003). The same and different genotypes/biotypes were found concomitantly in a few body sites and/ or repeatedly at time interval from the same body site. The results support the concept of dynamic exchange of yeast within one woman and endogenous or exogenous origin of vaginal candidiasis.

  17. WHAT MOTIVATES POLISH COMMUNITY PHARMACISTS TO PURSUIT OF POSTGRADUATE EDUCATION?.

    Science.gov (United States)

    Jasinska-Stroschein, Magdalena; Kurczewska, Urszula; Orszulak-Michalak, Daria

    2017-03-01

    Due to increasing importance of the advisory role for physicians and patients played by the pharmacist over the last decade, it seems appropriate to evaluate if and why pharmacists are interested in postgraduate medical education. The purpose of the study was to develop and validate an instrument to assess such motives, with special interest to Polish community pharmacists. A self-administered questionnaire was completed by a sample of participants of community pharmacist specialization programs and it was analyzed in relation to participants of other postgraduate courses. They were asked to rank their motives on a Likert-like scale and the underlying dimensions for study motives were identified using exploratory and confirmatory techniques. The reasons for taking specialization for community pharmacists were similar as compared to participants of other postgraduate studies. However, the autotelic factor was not so strong and the crucial reason was that such postgraduate training was required to be promoted in work. Basing on Polish results, we propose the division of motives into three groups - autotelic, instrumental and coincidental. The validated self-administered questionnaire based on this division displayed acceptable construct validity and internal consistency, and therefore can be proposed as an example tool to assess the particular motives and expectations of potential postgraduate students and employees in the pharmaceutical job market. The promotion of postgraduate education among pharmacists can improve the quality of pharmaceutical service.

  18. Evaluation of Rock Bolt Support for Polish Hard Rock Mines

    Science.gov (United States)

    Skrzypkowski, Krzysztof

    2018-03-01

    The article presents different types of rock bolt support used in Polish ore mining. Individual point resin and expansion rock bolt support were characterized. The roof classes for zinc and lead and copper ore mines were presented. Furthermore, in the article laboratory tests of point resin rock bolt support in a geometric scale of 1:1 with minimal fixing length of 0.6 m were made. Static testing of point resin rock bolt support were carried out on a laboratory test facility of Department of Underground Mining which simulate mine conditions for Polish ore and hard coal mining. Laboratory tests of point resin bolts were carried out, especially for the ZGH Bolesław, zinc and lead "Olkusz - Pomorzany" mine. The primary aim of the research was to check whether at the anchoring point length of 0.6 m by means of one and a half resin cartridge, the type bolt "Olkusz - 20A" is able to overcome the load.The second purpose of the study was to obtain load - displacement characteristic with determination of the elastic and plastic range of the bolt. For the best simulation of mine conditions the station steel cylinders with an external diameter of 0.1 m and a length of 0.6 m with a core of rock from the roof of the underground excavations were used.

  19. Historical Roots of Generalized Trust in Polish Society

    Directory of Open Access Journals (Sweden)

    Borowiecki Łukasz

    2014-11-01

    Full Text Available The article analyses how historical events shape generalized trust in contemporary Polish society. The analysis consists of a set of logistic regression models. The impact of historical variables is controlled for age, sex, education and the size of the municipality. This is the first quantitative study on Poland that links historical events with the current levels of trust among Polish citizens. The common knowledge is that the Partitions of Poland had negative impact on trust. Literature on the topic hints that historical demo? graphics should play a role too. The findings suggest that Partitions had little impact with only Greater Poland and Pomerania having lower levels of generalized trust. Historical literacy rate and the presence of Ukrainian or Belarusian population are negatively associated with generalized trust while the abrupt migrations after the World War I are positively associated. The rapid character of migration is supposed to positively impact generalized trust by forcing individuals to cooperate and rely on people with whom they have no personal ties.

  20. Evaluation of landslide monitoring in the Polish Carpathians

    Science.gov (United States)

    Collins, Brian D.; Baum, Rex L.; Mrozek, Teresa; Nescieruk, Piotr; Perski, Zbigniew; Raczkowski, Wojciech; Graniczny, Marek

    2011-01-01

    In response to the June 15, 2010 request from the Polish Geological Institute (PGI) to the U.S. Geological Survey (USGS) for assistance and advice regarding real-time landslide monitoring, landslide specialists from the USGS Landslide Hazard Program visited PGI headquarters and field sites in September 2010. During our visit we became familiar with characteristics of landslides in the Polish Carpathians, reviewed PGI monitoring techniques, and assessed needs for monitoring at recently activated landslides. Visits to several landslides that are monitored by PGI (the Just, Hańczowa, Szymbark, Siercza and Łasńica landslides) revealed that current data collection (monthly GPS and inclinometer surveys, hourly piezometers readings) is generally sufficient for collecting basic information about landslide displacement, depth, and groundwater conditions. Large landslides are typically hydrologically complex, and we would expect such complexity in Carpathian landslides, given the alternating shale and sandstone stratigraphy and complex geologic structures of the flysch bedrock. Consequently groundwater observations could be improved by installing several piezometers that sample the basal shear zone of each landslide being monitored by PGI. These could be supplemented by additional piezometers at shallower depths to help clarify general flow directions and hydraulic gradients. Remedial works at Hańczowa

  1. Pertussis outbreak in Polish shooters with adverse event analysis

    Directory of Open Access Journals (Sweden)

    Monika Skrzypiec-Spring

    2017-04-01

    Full Text Available In addition to different injuries, infections are the most common reason for giving up training altogether or reducing its volume and intensity, as well as a lack of opportunities to participate in sports competitions. Nowadays, a slow but constant re‑emergence of pertussis, especially among teenagers and young adults, including athletes, can be observed. This paper describes an outbreak of pertussis among professional Polish shooters, focusing on the transmission of Bordetella pertussis infection between members of the national team, its influence on performance capacity and adverse event analysis. From 9 June, 2015 to 31 July, 2015, a total of 4 confirmed and suspected cases of pertussis were reported among members of the Polish Sport Shooting National Team, their relatives and acquaintances. Pertussis significantly decreased exercise performance of the first athlete, a 35-year-old woman, interrupted her training, and finally resulted in failure to win a medal or quota place. Pertussis also significantly decreased performance of the second athlete, a 25-year-old shooter. The other cases emerged in their families. Whooping cough is a real threat to athletes and should be prevented. Preventive measures include appropriate immunization, constant medical supervision, as well as early isolation, diagnostic tests and treatment of all infected sport team members. Regular administration of booster doses of the acellular pertussis vaccine (Tdpa every 5 years seems reasonable.

  2. Five Martyr Brothers. First Polish hermits and their worship

    Directory of Open Access Journals (Sweden)

    Kinga Blaschke

    2016-12-01

    Full Text Available Brothers Benedict and John, students of Romuald, came to Poland at the invitation of Otto III to convert pagans. Soon the Italian hermits were joined by Polish brothers Isaac and Matthew, who helped them in learning the Slavic language. The hermits, as well as Christinus, well killed in 1003 by thugs who wanted to steal money given by Duke Boleslav to an expedition to Rome, which was aimed at obtaining papal consent for conducting missionary work. Although the hermits died as victims of a robbery, killed by fellow Christians, the pope canonized them as martyrs. Their lives are relatively well-documented: the earliest and the most credible story of the five brothers by Bruno of Querfurt was written as early as five years after their death, although remained unknown until 1883. Another early account is the life of St. Romuald by Piotr Damiani of 1041. The martyrs have been also associated with yet another mysterious work – a gravestone unearthed in 1959 at the external wall of the north Roman apse of the Gniezno Cathedral, considered by most researchers the oldest epigraphic item on the Polish soil. However, the identification of the warriors mentioned in the inscription with 11th century martyrs raises many doubts. The article discusses the above matters, as well as the subject of the development of the worship of the martyr brothers.

  3. Is hypochondriasis a significant problem among polish adolescents? An attempt of assessment of severe form of health anxiety in polish population

    Directory of Open Access Journals (Sweden)

    Janusz Kocjan

    2017-08-01

    [Conclusions] The study provides evidence about moderate intensification of health anxiety among polish adolescent. Health anxiety level was significantly higher among medical students versus non-medical students group.

  4. A novel vibration assisted polishing device based on the flexural mechanism driven by the piezoelectric actuators

    Directory of Open Access Journals (Sweden)

    Guilian Wang

    2018-01-01

    Full Text Available The vibration assisted polishing has widely application fields because of higher machining frequency and better polishing quality, especially the polishing with the non-resonant mode that is regarded as a kind of promising polishing method. This paper reports a novel vibration assisted polishing device, consisting of the flexible hinge mechanism driven by the piezoelectric actuators, which is suitable for polishing planes or curve surfaces with slow curvature. Firstly, the generation methods of vibration trajectory are investigated for the same frequency and different frequency signals’ inputs, respectively, and then the types of elliptic and Lissajous’s vibration trajectories are generated respectively. Secondly, a flexural mechanism consisting of the right circular flexible hinges and the leaf springs is developed to produce two-dimensional vibration trajectory. Statics and dynamics investigating of this flexible mechanism are finished in detail. The analytical models about input and output compliances of the flexural mechanism are established according to the matrix-based compliance modeling, and the dynamic model of the flexural mechanism based on the Euler-Lagrange equation is also presented. The finite element model of the flexural mechanism was established to carry out the numerical simulation in order to testify the rationality of device design. Finally, the polishing experiment is carried out to prove the effectiveness of the vibration device. The experimental results show that this novel vibration assisted polishing device developed in this study can remove more effectively the cutting marks left by last process and obviously reduce the workpiece surface roughness.

  5. The beginnings of the reception of Ludwik Fleck’s ideas in Polish (1936-1989

    Directory of Open Access Journals (Sweden)

    Paweł Jarnicki

    2016-12-01

    Full Text Available The article discusses the beginnings of the reception of Ludwik Fleck’s theory of thought styles and thought collectives in Polish, from his first polemics with Izydora Dąmbska in 1936 to the first edition of the Polish translation of Entstehung und Entwicklung

  6. Are Polish Primary School Pupils in Favor of Wearing Uniforms? Snapshot Comment

    Science.gov (United States)

    Asotska, Julia; Butler, Norman L.; Davidson, Barry S.; Griffith, Kimberly Grantham; Brown, Veda E.; Kritsonis, Wiilliam Allan

    2007-01-01

    The purpose of this article is to discuss whether Polish primary school pupils want to wear uniforms, and it is motivated by the Polish government's recently proposed policy: Zero Tolerance for Violence at School. Seventy one pupils, who attend Podstawowka Nr30 school in Cracow, were surveyed, and the authors found that most pupils are not in…

  7. The place of polish in the multilingual space of the European Union

    Directory of Open Access Journals (Sweden)

    T. I. Neprytska

    2015-03-01

    Full Text Available The article studies the position of the Polish language in the multilingual space of the European Union and determines the key factors which facilitate its gaining popularity and spreading in Europe. A large territory and population determine the significant presence of Polish in the European Union. Intense economic development facilitates popularization of learning and using Polish in the business medium, however, English was and still remains the dominating language of business. Active work of the state on improving the reputation of the country abroad, civilizational (value­based unity with other nations of the EU, favorable geographical position, common Indo­European roots of Germanic, Romanic and Slavonic  languages as well as usage of the Latin type create favorable conditions for the development and popularization of Polish on the territory of the EU. The article also mentions a number of concerns, which are rooted in the historical past of a dependent or semi­dependent existence of the Polish people, namely, the existence of the Polish and culture in the shade of German and Russian culture space, the negative international image of modern Poland, which was formed at the beginning of the 1990­s, the low level of Europeans’ familiarization with the Polish culture, absence of popularity and economic necessity of learning Polish abroad.

  8. Mathematical modelling of a self-polishing antifouling paint exposed to seawater: A parameter study

    DEFF Research Database (Denmark)

    Kiil, Søren; Pedersen, M. S.; Dam-Johansen, Kim

    2002-01-01

    , and to suggest ways of controlling biocide release rates. A case study with an antifouling paint based on the well-known tributyltin self-polishing copolymer system showed that the rate of paint polishing was influenced, to various degrees, by the following parameters: seawater pH and concentration of Na...

  9. The effect of European integration on exchange rate dependence: the Polish accession to the EU

    NARCIS (Netherlands)

    Thiel, J.H.; van Giersbergen, N.P.A.

    2010-01-01

    This paper investigates the effect of the Polish accession to the European Union (EU) on the dependence between the euro-US dollar and Polish zloty-US dollar exchange rate. The dependence is estimated by means of copulas as suggested by Patton (2006). This approach allows to first specify and

  10. Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

    Directory of Open Access Journals (Sweden)

    Cynthia Sumali

    2013-07-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

  11. Microstructure of pulsed-laser deposited PZT on polished and annealed MGO substrates

    NARCIS (Netherlands)

    King, S.L.; Coccia, L.G.; Gardeniers, Johannes G.E.; Boyd, I.W.

    1996-01-01

    Thin films of Lead-Zirconate-Titanate (PZT) have been grown by pulsed-laser-deposition (PLD) onto polished MgO substrates both with and without pre-annealing. The surface morphology of polished MgO substrates, which are widely used for deposition, is examined by AFM. Commercially available,

  12. Word Boundaries in L2 Speech: Evidence from Polish Learners of English

    Science.gov (United States)

    Schwartz, Geoffrey

    2016-01-01

    Acoustic and perceptual studies investgate B2-level Polish learners' acquisition of second language (L2) English word-boundaries involving word-initial vowels. In production, participants were less likely to produce glottalization of phrase-medial initial vowels in L2 English than in first language (L1) Polish. Perception studies employing word…

  13. 'Polished' cinema : Over de receptie van het werk van Andrzej Kondratiuk in Polen en het groteske

    NARCIS (Netherlands)

    Gusc, I.

    2012-01-01

    Despite being brutally slated at times, Andrzej Kondratiuk’s films were also often admired and praised by Polish film critics. Their inability to uniformly categorise and value Kondratiuk’s highly unconventional work has led to him being set aside, and labelled as, a ‘separate’ filmmaker in Polish

  14. Development of a multisensory arm for process monitoring in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

    2015-01-01

    A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor. The f...

  15. OSSM2008 Polish Moessbauer Community Meeting: Program, Abstracts and List of Participants

    International Nuclear Information System (INIS)

    2008-01-01

    The Polish Moessbauer Community Meeting - OSSM2008 has been organized by Polish scientists using the Moessbauer spectroscopy in their research. Main subjects of the meeting are investigations of modern materials electronic structure by means of Moessbauer effect (ME), using ME in biological test of tissue diseases and ME investigation of physical properties of different steels

  16. Holocaust Education in Polish Public Schools: Between Remembrance and Civic Education

    Science.gov (United States)

    Milerski, Boguslaw

    2010-01-01

    This article analyzes the historical and political context of Holocaust education, and its implementation in Polish schools. Perceptions of the Holocaust continue to change, influenced by Poland's social and political situation. The Polish historical context is quite specific; it includes the long history of Poles and Jews as neighbors, with local…

  17. Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

    Science.gov (United States)

    Boaventura, Juliana Maria Capelozza; Nishida, Rodrigo; Elossais, André Afif; Lima, Darlon Martins; Reis, José Mauricio Santos Nunes; Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

    2013-01-01

    To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) RESULTS: All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic.

  18. Polish Foreign Trade: The Quality Catch-up and the Influence of Foreign Direct Investments

    DEFF Research Database (Denmark)

    Nielsen, Jørgen Ulff-Møller

    2000-01-01

    This paper investigates how the Polish transition process has expressed itself in export and inward foreign direct investments (FDI), and the relations between export and FDI. Since 1988, the number of Polish products able to compee in export markets has steadily increased. The quality level...

  19. Efficacy of polishing kits on the surface roughness and color stability ...

    African Journals Online (AJOL)

    Objective: Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Materials and Methods: Thirty specimens were made for each composite ...

  20. Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

    Science.gov (United States)

    Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

    2016-01-01

    This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

  1. Fighting alcoholism among railway workers in the light of early 20th Century Polish-language temperance publications

    Directory of Open Access Journals (Sweden)

    Izabela Krasińska

    2016-12-01

    Discussion and conclusions: The Polish-language temperance periodicals provide, among other things, valuable information referring to as yet unknown though essential problem of fighting alcoholism among railway workers in Europe, USA and the Polish territories of the Three Partitions.

  2. Multi-objective optimization of circular magnetic abrasive polishing of SUS304 and Cu materials

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, NhatTan; Yin, ShaoHui; Chen, FengJun; Yin, HanFeng [Hunan University, Changsha (China); Pham, VanThoan [Hanoi University, Hanoi (Viet Nam); Tran, TrongNhan [Industrial University of Ho Chi Minh City, HCM City (Viet Nam)

    2016-06-15

    In this paper, a Multi-objective particle swarm optimization algorithm (MOPSOA) is applied to optimize surface roughness of workpiece after circular magnetic abrasive polishing. The most important parameters of polishing model, namely current, gap between pole and workpiece, spindle speed and polishing time, were considered in this approach. The objective functions of the MOPSOA depend on the quality of surface roughness of polishing materials with both simultaneous surfaces (Ra1, Ra2), which are determined by means of experimental approach with the aid of circular magnetic field. Finally, the effectiveness of the approach is compared between the optimal results with the experimental data. The results show that the new proposed polishing optimization method is more feasible.

  3. Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

    Directory of Open Access Journals (Sweden)

    Szlanta Piotr

    2017-06-01

    Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

  4. Polishing and toothbrushing alters the surface roughness and gloss of composite resins.

    Science.gov (United States)

    Kamonkhantikul, Krid; Arksornnukit, Mansuang; Takahashi, Hidekazu; Kanehira, Masafumi; Finger, Werner J

    2014-01-01

    This study aimed to investigate the surface roughness and gloss of composite resins after using two polishing systems and toothbrushing. Six composite resins (Durafill VS, Filtek Z250, Filtek Z350 XT, Kalore, Venus Diamond, and Venus Pearl) were evaluated after polishing with two polishing systems (Sof-Lex, Venus Supra) and after toothbrushing up to 40,000 cycles. Surface roughness (Ra) and gloss were determined for each composite resin group (n=6) after silicon carbide paper grinding, polishing, and toothbrushing. Two-way ANOVA indicated significant differences in both Ra and gloss between measuring stages for the composite resins tested, except Venus Pearl, which showed significant differences only in gloss. After polishing, the Filtek Z350 XT, Kalore, and Venus Diamond showed significant increases in Ra, while all composite resin groups except the Filtek Z350 XT and Durafill VS with Sof-Lex showed increases in gloss. After toothbrushing, all composite resin demonstrated increases in Ra and decreases in gloss.

  5. Polish Adult Reading Test (PART) - construction of Polish test for estimating the level of premorbid intelligence in schizophrenia.

    Science.gov (United States)

    Karakuła-Juchnowicz, Hanna; Stecka, Mariola

    2017-08-29

    In view of unavailability in Poland of the standardized methods to measure PIQ, the aim of the work was to develop a Polish test to assess the premorbid level of intelligence - PART(Polish AdultReading Test) and to measureits psychometric properties, such as validity, reliability as well as standardization in the group of schizophrenia patients. The principles of PART construction were based on the idea of popular worldwide National Adult Reading Test by Hazel Nelson. The research comprised a group of 122 subjects (65 schizophrenia patients and 57 healthy people), aged 18-60 years, matched for age and gender. PART appears to be a method with high internal consistency and reliability measured by test-retest, inter-rater reliability, and the method with acceptable diagnostic and prognostic validity. The standardized procedures of PART have been investigated and described. Considering the psychometric values of PART and a short time of its performance, the test may be a useful diagnostic instrument in the assessment of premorbid level of intelligence in a group of schizophrenic patients.

  6. POLYMORPHISM OF PROLACTIN RECEPTOR GENE (PRLR IN THE POLISH LANDRACE AND POLISH LARGE WHITE SWINE POPULATION AND REPRODUCTIVE TRAITS

    Directory of Open Access Journals (Sweden)

    AGATA ZIÓŁKOWSKA

    2011-01-01

    Full Text Available Prolactin receptor gene was found in pig chromosome 16, and it is one of the genes with a significant effect on reproduction traits in sows. The objective of the research was to determine polymorphism of the prolactin receptor gene in pigs of two maternal breeds: Polish Landrace and Polish Large White, as well as analyse relations between particular allelomorphic variants, and reproduction traits of examined sows. Two PRLR gene alleles, A and B, were isolated, they were obtained after AluI restriction gene digestion of the PCR product with the length of 163 bp; furthermore, three genotypes were identified: PRLRAA – 85, 59, 19 bp; PRLRAB – 104, 85, 59, 19 bp; PRLRBB – 104, 59 bp. We assessed 122 sows, in terms of their age at the first farrowing, as well as the sizes of the two subsequent litters. No statistically significant differences were found in the examined reproduction traits in sows with different allelomorphic relations, both within each breed and between breeds. Obtained results indicate that it is necessary to conduct further research on a larger animal group.

  7. A Critical Analysis Of The Majority Judgment In F V Minister Of Safety And Security 2012 1 Sa 536 (Cc

    Directory of Open Access Journals (Sweden)

    James Linscott

    2014-12-01

    Full Text Available The majority judgment of Mogoeng CJ in F v Minister of Safety and Security 2012 1 SA 536 (CC purports to be a straightforward application of the reasoning of the Constitutional Court in K v Minister of Safety and Security 2005 6 SA 419 (CC, in which the court updated and constitutionalised the "standard test" for vicarious liability in deviation cases originally set out in Minister of Police v Rabie 1986 1 SA 117 (A by holding that constitutional and other policy norms now play an important role in deciding questions of vicarious liability. However, it is respectfully submitted that a close reading of the majority judgment in F reveals that the judge misconstrues several key concepts related to the doctrine of vicarious liability. In particular, the judge seems to suggest that there are separate and different tests for vicarious liability in instances where an employee has plainly committed a delict in the course and scope of his employment, and where he has to some extent deviated from his employment duties. In fact, there is a single overarching test for vicarious liability - the course and scope rule - but various subsidiary tests are used by the courts to address difficult or borderline cases. It is also questionable whether F truly is a "typical deviation case", as the judge asserts. The judge then applies the constitutionalised test for vicarious liability originally set out in K in a manner which is subtly, but significantly, different from how it was deployed in that case. In particular, Mogoeng CJ's implication that it is not necessary for a court to consider the second leg of the Rabie test in circumstances where the employee wrongdoer has clearly subjectively intended to further the interests of his employer is undesirable and should not be supported. Furthermore, the judge identifies the question of whether or not there is an "intimate link" between the conduct of the employee wrongdoer and the business of his employer as one of the

  8. Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

    Science.gov (United States)

    Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

    2010-01-01

    We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

  9. Surface changes of metal alloys and high-strength ceramics after ultrasonic scaling and intraoral polishing.

    Science.gov (United States)

    Yoon, Hyung-In; Noh, Hyo-Mi; Park, Eun-Jin

    2017-06-01

    This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were 3.02±0.34 µm, 2.44±0.72 µm, and 3.49±0.72 µm, respectively. Surface roughness of lithium disilicate increased from 2.35±1.05 µm (pristine) to 28.54±9.64 µm (scaling), and further increased after polishing (56.66±9.12 µm, P scaling (from 1.65±0.42 µm to 101.37±18.75 µm), while its surface roughness decreased after polishing (29.57±18.86 µm, P scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

  10. Surface geometry of three packable and one hybrid composite after polishing.

    Science.gov (United States)

    Jung, Martin; Bruegger, Hilka; Klimek, Joachim

    2003-01-01

    This study evaluated the surface quality of four composite materials after polishing with six different polishing techniques. Eighty specimens were made using three packable composites (Definite/Degussa, SureFil/ Dentsply and Solitaire/Heraeus-Kulzer) and one hybrid composite (Herculite XRV/Kerr). Five specimens of each material were polished using flexible Sof-Lex discs. The remaining 75 specimens of each composite were prepared using three finishing protocols: a single 30 microm diamond (n = 25), two finishing diamonds (30/20 microm; n = 25) and a 30 microm diamond followed by a tungsten carbide finishing bur (n = 25). Final polishing of each of the three finishing groups was accomplished with SuperBuff, Diafix-oral, OneGloss, Astropol and HaWe Composite Polishers (n = 5, each). Surface roughness was evaluated quantitatively by laser-stylus profilometry. Average roughness (R(a)) was calculated; statistical analysis of the data was performed with two-way ANOVA and Scheffé post-hoc tests. The polished surfaces were examined qualitatively by SEM. The results showed significant effects on surface roughness from the different composites (p = 0.011) and polishing systems (p < 0.001). After polishing, the Solitaire surfaces (R(a) = 0.72 microm) were smoother than Definite (R(a) = 0.87 microm) and SureFil (R(a) = 0.89 microm) and significantly smoother than Herculite (R(a) = 0.92 microm; p = 0.011). Three of the polishing methods (SuperBuff, Diafix-oral and Astropol) achieved lower R(a)-values than Sof-Lex discs. The polishing quality of the one-step systems SuperBuff and Diafix-oral was strongly affected by the initial finishing protocol.

  11. [A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

    Science.gov (United States)

    Kakaboura, A; Vougiouklakis, G; Argiri, G

    1989-01-01

    Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

  12. Work Engagement – A Systematic Review of Polish Research

    Directory of Open Access Journals (Sweden)

    Pollak Anita

    2017-06-01

    Full Text Available Over the past decade work engagement has gained both business and academia attention. With growing number of studies and meta-analyses the concept of work engagement is one of the pillars of positive work and organizational psychology. This systematic review presents the current state of research on work engagement in Poland. Results confirmed that work-engagement studies have not yet reached the threshold to conduct meta-analysis. The review of measurement methods and synthesis of findings allows to identify strengths and gaps in Polish studies. Discussion of limitations and biases in current research is accompanied with urge to overcome them and develop thriving stream of research on work engagement.

  13. Constraints on Negative Prefixation in Polish Sign Language.

    Science.gov (United States)

    Tomaszewski, Piotr

    2015-01-01

    The aim of this article is to describe a negative prefix, NEG-, in Polish Sign Language (PJM) which appears to be indigenous to the language. This is of interest given the relative rarity of prefixes in sign languages. Prefixed PJM signs were analyzed on the basis of both a corpus of texts signed by 15 deaf PJM users who are either native or near-native signers, and material including a specified range of prefixed signs as demonstrated by native signers in dictionary form (i.e. signs produced in isolation, not as part of phrases or sentences). In order to define the morphological rules behind prefixation on both the phonological and morphological levels, native PJM users were consulted for their expertise. The research results can enrich models for describing processes of grammaticalization in the context of the visual-gestural modality that forms the basis for sign language structure.

  14. Four Riders of the Apocalypse of the Polish Bureaucracy

    Directory of Open Access Journals (Sweden)

    Kieżun Witold

    2018-03-01

    Full Text Available This article was originally published in Polish as: Witold Kieżun, Czterej jeźdźcy apokalipsy polskiej biurokracji, Kultura, No. 3/630, Paris 2000. The Literary Institute (publisher of the “Kultura” monthly expressed its interest in and consent to the publication of an English-language version of this article. Professor Witold Kieżun also gave his consent to the translation of his text and its posting in the pages of the journal Foundations of Management. The text was written in 1999 and introduced subsequent to January 1 of that year, regarding the reform of the administrative division of Poland, which involved, among other things, three-stage structure of territorial division and the introduction of counties as administrative units (editorial note.

  15. Polish Accession to the European Union: Participating Institutions

    Directory of Open Access Journals (Sweden)

    Tomaszewski Waldemar

    2015-06-01

    Full Text Available In May 2014 it was aready ten years since Poland’s accession to the European Union. The accession was preceded by a long period of political action and negotiations between the Polish and the EU institutions. The process of integration was extremely complex. It covered almost all areas of economic, legal and civil aspects of the aspiring country’s economy, in which all necessary requirements had to be met. The aim of the article was to present the institutional framework created for efficient implementation of the process of accession. The considerations involved especially an institutional method. The research resulted in poining out both the actually efficient and less efficient bodies participating in the process of integration.

  16. 16th French-German-Polish Conference on Optimization

    CERN Document Server

    Korytowski, Adam; Maurer, Helmut; Szymkat, Maciej

    2016-01-01

    This book contains extended, in-depth presentations of the plenary talks from the 16th French-German-Polish Conference on Optimization, held in Kraków, Poland in 2013. Each chapter in this book exhibits a comprehensive look at new theoretical and/or application-oriented results in mathematical modeling, optimization, and optimal control. Students and researchers involved in image processing, partial differential inclusions, shape optimization, or optimal control theory and its applications to medical and rehabilitation technology, will find this book valuable. The first chapter by Martin Burger provides an overview of recent developments related to Bregman distances, which is an important tool in inverse problems and image processing. The chapter by Piotr Kalita studies the operator version of a first order in time partial differential inclusion and its time discretization. In the chapter by Günter Leugering, Jan Sokołowski and Antoni Żochowski, nonsmooth shape optimization problems for variational inequa...

  17. Uranium in the Bunter sediments of the Polish area

    International Nuclear Information System (INIS)

    Saldan, M.; Strzelecki, R.

    1980-01-01

    Uranium mineralization occurring in the Triassic sediments in the Polish area is discussed. Systematic work conducted for over ten years revealed the presence of uranium mineralization in the following geological units: Peribaltic syneclize, Fore-Sudetic monocline, Zary pericline and Pomerania trough. Out of three uranium-bearing horizons which can be correlated with each other two (the lower and the middle) are connected with the Middle Bunter, while the upper horizon is related to the Upper Bunter. Mineralization was found in sandstones, conglomerates, mudstones and claystones and, in the Fore-Sudetic monocline, also in carbonates. Among uranium minerals uranium black and coffinite were identified. In addition to uranium, increased vanadium, selenium and molybdenum contents were found in the sandstones. Some of the uranium-bearing horizons are of economic value. (author)

  18. Polish model of electric energy market-bulk energy tariff

    International Nuclear Information System (INIS)

    Malysa, H.

    1994-01-01

    The key problem of electric energy supply industry reform is gradually launching a competitive wholesale generation market since 1994. In process of this transformation the important role plays bulk energy supply tariff in electricity transactions between Polish Power Grid Company and distribution and retail supply companies (distributors). Premises, factors and constrains having influence on shaping of the bulk energy supply tariff are presented. A brief outline of economic foundation for calculation of demand charges and energy rate is given. Particular attention has been paid to description of bulk energy supply tariff structure. The scope and manner of adjustment of this tariff to circumstances and constrains in the initial stage of the wholesale electric energy market have been described as well. (author). 8 refs

  19. Old age in Polish and American tv series

    Directory of Open Access Journals (Sweden)

    JOANNA ANIOŁ

    2013-12-01

    Full Text Available The educational and socialization role of the media is not the latest novelty, however there are niches that have not been developed yet. Realizing the opinion-forming role of the mass media, which may be reflected in social behaviours, the authors of this article will analyse the content of chosen media products. The image of elderly people presented by the most popular Polish and American series will be examined. The research aims to find whether Desperate Housewives and Colours of happiness (original title: Barwy szczęścia adjust the image of old age to the social-demographic situation, which is constantly changing in the majority of countries. Does the colossus – television promote stereotypes which make age discrimination morally approved – or just the opposite – a well thought out image, shaping the recognition and respect for people in their “third age”?

  20. RESEARCH OF REFRIGERATION SYSTEMS FAILURES IN POLISH FISHING VESSELS

    Directory of Open Access Journals (Sweden)

    Waldemar KOSTRZEWA

    2013-07-01

    Full Text Available Temperature is a basic climatic parameter deciding about the quality change of fishing products. Time, after which qualitative changes of caught fish don’t exceed established, acceptable range, is above all the temperature function. Temperature reduction by refrigeration system of the cargo hold is a basic technical method, which allows extend transport time. Failures of refrigeration systems in fishing vessels have a negative impact on the environment in relation to harmful refrigerants emission. The paper presents the statistical analysis of failures occurred in the refrigeration systems of Polish fishing vessels in 2007‐2011 years. Analysis results described in the paper can be a base to draw up guidelines, both for designers as well as operators of the marine refrigeration systems.

  1. Acidizing of Zechstein Main Dolomite in the Polish lowlands

    Energy Technology Data Exchange (ETDEWEB)

    Bierdzychi, W

    1966-07-01

    The first acidizing of Zechstein Dolomite in the Polish Lowlands was carried out in 1961. In the initial stage, a tendency existed toward multistage acidizing, and preheated acidizing fluid was used. In a preliminary operation, an acid having the concentration 12-36% was used for washing out the borehole. No additives were utilized except formalin for corrosion inhibition. In order to increase the absorption capacity, hydraulic perforations were used. The composition of acidizing fluid was determined in a preliminary study for any individual reservoir. From laboratory study, it was concluded also that the required time of 3-4 hr was sufficient for the exhaustion of acid. The pre-heating of the acid at the bottom of the hole by exothermic reaction with metallic magnesium was abandoned in the later stage of operations.

  2. Strategies for sustainable development of the Polish electric power system

    International Nuclear Information System (INIS)

    Janiczek, R.

    1996-01-01

    The key features of sustainable development of the Polish electric power industry are discussed. Priorities and limitations for changes and power demand forecasts are described. Results of least-cost planning for existing power plants' modernization and generation expansion with environmental impacts are presented. The least-cost strategy is given by the optimal upgrades of older plants until year 2002 and by expansion of gas-fired units. The limited availability of gas after 2010 will lead to the construction of new coal-fired plants. For the next planning process, an integrated resource planning methodology is proposed, which includes dynamic optimization of supply and demand side options. Innovative mechanisms are shown to overcome barriers of development like long-terms contracts and decentralization of the power system planning process. (author)

  3. The first Polish conference: Special glasses and amorphous materials. Introduction

    International Nuclear Information System (INIS)

    1993-01-01

    The present issue brings a collection of papers submitted to the 1. Polish Conference on special glasses and amorphous materials, held on June 1993 at the University of Mining and Metallurgy in Cracow. It was a survey of the research topics and attainments of the research teams working in this referring to the nature of the glassy state of the matter and the relation between glasses and other amorphous materials, properties of these materials as well as modern methods of their synthesis both at low and high temperatures. Some of the results presented at the Conference have already found application in industry. Here belong, among others, the works on optic fibres. Several new materials which have been recently elaborated may also find interesting and new practical application. (author)

  4. Grinding and polishing of conformal windows and domes

    Science.gov (United States)

    Fess, Edward; Ross, James; Matthews, Greg

    2017-05-01

    Conformal optics require special manufacturing techniques to produce them to optical tolerances. In many cases the materials used are very hard optical ceramics that present additional manufacturing challenges due to their hardness and grain structure. OptiPro has developed grinding technologies such as OptiSonic grinding, as well as sub-aperture polishing technologies like UltraForm Finishing (UFF) to manufacture these challenging components. We have also developed a custom computer aided manufacturing (CAM) software package, ProSurf, to generate the complex tool paths for both grinding and polishing processes. One of the main advantages of ProSurf over traditional CAM software packages is that it uses metrology feedback for deterministic corrections. The metrology input can be obtained from OptiPro's 5-axis UltraSurf metrology system, which is capable of measuring these complex shapes to sub-micron accuracies. Through the development of these technologies much work has been performed in creating, measuring and analyzing the alignment fiducials or datum's used to qualify the location of the optical surfaces. Understanding the sensitivity of the optical surface to any datum misalignment is critical to knowing not only where the part is in space, but how good the optical surfaces are to each other. Working with the optical designer to properly tolerance surfaces to these datums is crucial. This paper will present the technologies developed by OptiPro to manufacture conformal windows as well as information related to the optical surfaces sensitivity to datums and how accurately those datums can be measured.

  5. Book-tax conformity in Polish private companies

    Directory of Open Access Journals (Sweden)

    Anna Białek-Jaworska

    2016-12-01

    Full Text Available The purpose of this paper is to identify whether financial income differs significantly from the tax base in Poland and what determines these differences between accounting and taxable results in Polish private entities that are not listed on the stock exchange. In this paper, besides examining the level of book-tax conformity in Poland, we investigate the determinants of book-tax differences in the one-book and twobook accounting systems, with deferred income tax. We use the single factor ANOVA variance analysis, robust fixed effects estimator and the fixed effects linear model with an AR(1 disturbance estimator for panel data of 26,657 private limited liability and non-public joint-stock companies for the period of 2003–2014 (177,667 firm-year observations. The originality of this paper results from the deep quantita-tive analysis of the determinants of book-tax conformity on a novel dataset of Polish private firms. We confirm a strong significant influence of tax law on the shape of the one-book accounting system in Poland. Larger enterprises show fewer book-tax differences. Book-tax conformity is lower in private companies that incur financial losses and in private companies conducting the one-book accounting system. Family-owned companies have higher mean and median book-tax conformity than businessgroups members, due to higher demand for information from their accounts to support stewardship func-tions and to monitor the activities of the management board in the business groups.

  6. Energy Policies of IEA Countries: Poland [Polish version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Poland has made commendable efforts to develop a solid energy policy framework over the last years. As energy security is a high policy priority, the country is enhancing gas supply security by building an LNG terminal, expanding underground storage capacity and increasing domestic gas production. Polish plans for developing electricity and gas cross-border links will also contribute to regional security of supply. In addition, the government has announced an ambitious nuclear programme by 2030, envisaging the first unit to enter operation by 2022. Other achievements include energy intensity improvements, an increased share of renewables and a stronger focus on energy research and development (R&D). Despite these positive developments, there is room for improving Poland’s energy strategy. First, a more integrated energy and climate policy is needed to put Poland firmly on a low-carbon path while enhancing energy security. Second, energy policy could put more emphasis on promoting competition to make the energy markets more efficient. Decarbonising Poland’s power sector will be a particularly significant challenge requiring huge investments. Coal accounts for 55% of Polish primary energy supply and 92% of electricity generation, raising significant climate change and environmental challenges. To this end, Poland’s efforts to improve energy efficiency and to diversify the country’s energy mix are praiseworthy and should be pursued. The government’s attention to R&D on clean coal technologies, including carbon capture and storage (CCS) is also encouraging. The government could put more focus on the positive role that gas can play in decarbonising the electricity mix, especially if Poland’s potential resources of unconventional gas are confirmed. To tap these resources, it will be vital to put the necessary legal and regulatory framework in place. This in-depth review analyses the energy challenges facing Poland and provides sectoral critiques and

  7. Settlement Networks in Polish Spatial Development Regional Plans

    Science.gov (United States)

    Sołtys, Jacek

    2017-10-01

    In 1999, ten years after the great political changes in Poland, 16 self-governed regions (in Polish: voivodeship) were created. According to Polish law, voivodeship spatial development plans, or regional plans in short, determine basic elements of the settlement network. No detailed regulations indicate the specific elements of the settlement network or what features of these elements should be determined. For this reason, centres as elements of the settlement network are variously named in different regions and take the form of various models. The purposes of the research described in this article are: (1) recognition and systematization of settlement network models determined in regional plans; and (2) assessment of the readability of determination in planning and its usefulness in the practice of regional policy. Six models of settlement networks in regional plans have been identified and classified into types and sub-types. Names of specific levels of centres indicate that they were classified according to two criteria: (1) level of services, which concerns only 5 voivodships; and (2) importance in development, which concerns the 11 other voivodships. The hierarchical model referring to the importance of development is less understandable than the one related to services. In the text of most plans, centres of services and centres of development are treated independently from their names. In some plans the functional types of towns and cities are indicated. In some voivodships, specifications in the plan text are too general and seem to be rather useless in the practice of regional policy. The author suggests that regional plans should determine two kinds of centres: hierarchical service centres and non-hierarchical centres of development. These centres should be further distinguished according to: (1) their role in the activation of surroundings; (2) their level of development and the necessity of action for their development; and (3) the types of actions

  8. Professional activity of Polish peri- and postmenopausal women

    Directory of Open Access Journals (Sweden)

    Dorota Żołnierczuk-Kieliszek

    2016-09-01

    Full Text Available Introduction: The menopausal transition as one of the stages in women’s life can bring many ailments which complicate the accomplishment of professional duties. The situation of women on the Polish job market is determined by many barriers and stereotypes which impede women’s access to jobs and professional promotions. Material and methods : The aim of the study was to estimate the professional status and job satisfaction of women aged 40-65. The research was carried out by a survey method, a poll technique in the period from January to March 2016. An original questionnaire consisting of 35 questions was used as a research tool. Results: The analysis of obtained results shows that the arithmetic mean of the age of women in full-time employment was 51.84 years whereas the arithmetic mean of the age of women in part-time or seasonal employment was 52.64. Women aged 45-60 were characterised by a significantly lower job satisfaction than women over 60 years of age. The highest percentage of women in full-time employment lived in large cities. The financial situation of working women determined their job satisfaction. Well-off respondents were more pleased with their jobs than women in a worse financial situation. Conclusions : There is a strong need of education about counteraction of gender and age discrimination on the Polish labour market. The struggle against discrimination requires support on each level of the state administration through the implementation of numerous regulations facilitating the final period and resumption of women’s professional activity.

  9. Sexual development and behaviour issues in Polish teenage magazines.

    Science.gov (United States)

    Kopacz, Marek S

    2006-12-01

    Adolescents often look to mass media for information regarding issues of sexuality. As one form of media, teenage magazines have long constituted a pervasive and effective element of adolescent media exposure. Teenage magazines discuss a number of aspects concerning adolescent sexuality. Considering their potential impact on health related behaviors, the information they provide and the message(s) they send warrant attention. The aim of this study is to perform a content analysis of sexual development and behavior information presented in Polish teenage magazines. Social Cognitive Theory was used as a theoretical basis for this analysis. The media chosen for this study were general-themed publications targeting an adolescent female audience: Bravo Girl!, Filipinka and Dziewczyna. Each entry was analyzed using a structured key. The specific categories of behavior and development used for this study are: biological information, pedagogic instruction, topics of moral-ethical concern, results of sexual activity, and interpersonal relationships. Each category was then subdivided into separate units. The findings indicate that Polish teenage magazines predominantly focus on relationships, contraception and sex education. Relationships were most often of a romantic nature and discussed sexual activity or the potential of sexual activity. Non-prescription contraceptive methods were most often discussed, with attention given to pregnancy prevention. Sex education offered detailed information on sexual practices and behaviors with much discussion on losing one's virginity. The general approach of the analyzed magazines is that adolescents currently are, or soon will be, sexually active. As a result, certain sexual behavior and development issues are discussed in great detail, while other topics are somewhat neglected. Accepting information-seeking during adolescence as commonplace, these findings suggest that teenage magazines hold the potential for influencing adolescent

  10. Dissolved air flotation of polishing wastewater from semiconductor manufacturer.

    Science.gov (United States)

    Liu, J C; Lien, C Y

    2006-01-01

    The feasibility of the dissolved air flotation (DAF) process in treating chemical mechanical polishing (CMP) wastewater was evaluated in this study. Wastewater from a local semiconductor manufacturer was sampled and characterised. Nano-sized silica (77.6 nm) with turbidity of 130 +/- 3 NTU was found in the slightly alkaline wastewater with traces of other pollutants. Experimental results indicated removal efficiency of particles, measured as suspended particle or turbidity, increased with increasing concentration of cationic collector cetyltrimethyl ammonium bromide (CTAB). When CTAB concentration was 30 mg/L, pH of 6.5 +/- 0.1 and recycle ratio of 30%, very effective removal of particles (> 98%) was observed in saturation pressure range of 4 to 6 kg/cm2, and the reaction proceeded faster under higher pressure. Similarly, the reaction was faster under the higher recycle ratio, while final removal efficiency improved slightly as the recycle ratio increased from 20 to 40%. An insignificant effect of pH on treatment efficiency was found as pH varied from 4.5 to 8.5. The presence of activator, Al3+ and Fe3+, enhanced the system performance. It is proposed that CTAB adsorbs on silica particles in polishing wastewater through electrostatic interaction and makes particles more hydrophobic. The increase in hydrophobicity results in more effective bubble-particle collisions. In addition, flocculation of silica particles through bridging effect of collector was found; it is believed that flocculation of particles also contributed to flotation. Better attachment between gas bubble and solid, higher buoyancy and higher air to solid ratio all lead to effective flotation.

  11. Adaptation and Validation of the ADOS-2, Polish Version

    Directory of Open Access Journals (Sweden)

    Izabela Chojnicka

    2017-11-01

    Full Text Available Autism Diagnostic Observation Schedule (ADOS is one of the most popular instruments used world-widely in the diagnosis of autism spectrum disorders (ASD. Unfortunately, there are only a few studies of the psychometric properties of non-English language versions of this instrument and none of the adaptation of its second edition (ADOS-2. The objective of this study was to verify the psychometric properties of the Polish version of the Autism Diagnostic Observation Schedule, Second Edition (ADOS-2-PL. The authors recruited 401 participants: 193 with ASDs (ASD group and 78 with non-spectrum disorders, plus 130 typically developing participants (control group. ADOS-2-PL was found to have high interrater reliability, internal consistency and test–retest reliability. Confirmatory factor analysis confirmed a good fit of the Polish data to the two-factor model of ADOS-2. As no significant differences were found between participants with childhood autism and other ASDs, only one cut-off was established for Modules 1–4. The sensitivity, specificity and positive predictive value of ADOS-2-PL are high: sensitivity was over 90% (only for the “Older with some words” algorithm in the Toddler Module the sensitivity was 71% and “Aged 5 years or older” algorithm in Module 2 sensitivity was 84%, specificity was above 80% (with the exception of the Module 4 and Module 2 “Aged 5 years or older” algorithm where it was above 70%. The results support the use of ADOS-2-PL in clinical practice and scientific research. To the best of our knowledge, there have been no reports to date about adaptations of ADOS-2 and the psychometric properties of non-English language versions. As such, this constitutes the first attempt at adapting ADOS-2, and its results could be of interest for researchers outside of Poland.

  12. Evaluating Empowered to Council of Ministers by Article 73/4 of the Constitution in Terms of Legality Principle of Taxation

    Directory of Open Access Journals (Sweden)

    Adnan GERÇEK

    2017-07-01

    Full Text Available In accordance with the principle of “no taxation without representation”, the “legality principle of taxation” is included in the constitutions of all countries. The authority to amend related to certain elements in taxation and within the minimum and maximum limits prescribed by law has been granted to the Council of Ministers by the special provision in Article 73/4 of the Turkey’s Constitution. The reasons of this provision are “to prevent the fall of tax burden due to the effect of inflation on exemptions and exceptions” and "bringing flexibility and promptness for intervention in the economy to be effective and quick”. The number of regulations regarding empowered of the Council of Ministers in Turkish tax laws is increasing day by day. The Council has been granted the authority to amend at 107 different articles of 25 tax laws in recent legislation. However, the granted authority in 25 of these provisions has never been used. During the period 1971-2017, the Council of Ministers used this authority by 735 Decisions. The authority to make amendments to the Council of Ministers; were used 10 times in the “exemption”, 22 times in the “exception”, 36 times in the “discount”, 438 times in the “rate”, 195 times in the “fixed amount” and 48 times in the “other” elements of tax respectively. It is expected that there will be a decrease in the number of new regulations of the Council of Ministers with the fall of inflation after 2003 in Turkey, but in practice The Council has been granted the authority to amend at new 32 different articles. However, in a country that has embraced democracy and the rule of law, no provision which may cause deviations from “legality principle of taxation” can be accepted. For this reason, provision of empowering to the Council of Ministers should be abolish from the Constitution, which damages to rule of law and legality principle of taxation.

  13. Progress report projects in the field of nuclear safety sponsered by the Federal Minister for Research and Technology

    International Nuclear Information System (INIS)

    1980-03-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS-Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear energy plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS-F-Fortschrittsberichte (GRS-F-Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work at the GRS, within the framework of general information of the progress in reactor safety research. The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC and the OECD. (orig./HP) [de

  14. Reports on the research projects in the field of nuclear safety sponsored by the Federal Minister for Research and Technology

    International Nuclear Information System (INIS)

    1979-12-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS - Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The CRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS - F - Fortschrittsberichte (GRS - F - Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work. The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT in the near future. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC Communities and the OECD.(orig./HP) [de

  15. Remarks of Honorable Eleanor Norrie, Minister of the Nova Scotia Department of Natural Resources at the 1996 CORE conference

    Energy Technology Data Exchange (ETDEWEB)

    Norrie, E.

    1996-10-01

    Speaking notes used by the Nova Scotia Minister of Natural Resources at the 1996 CORE Conference were provided. The presentation focused on the new Sable Offshore Energy Project, an important new offshore gas field being developed by Mobil Oil. The project represents a total investment of $3 billion, the biggest capital project ever undertaken in Nova Scotia, and is completely funded by the private sector. Nearly 4,000 jobs will be created during the offshore and onshore construction phase, as well as future tax revenues for the province, new business opportunities, infrastructure for future projects, and an estimated 11,000 `spin-off` jobs. To expedite the development process, the Government of Nova Scotia has recently established the Nova Scotia Offshore Energy Office to work exclusively on the Sable gas and pipeline project. Future plans include a gas processing plant for Guysborough County. The gas will be transported by pipeline across New Brunswick to the New England market. A proposal by Gaz Metropolitain is also expected which would have some of the gas transported to Quebec.

  16. The 59. conference of Canada's energy and mines ministers : A submission by the Coal Association of Canada

    International Nuclear Information System (INIS)

    2002-01-01

    The most abundant fossil fuel in Canada is coal, and almost 20 per cent of all electricity generated in Canada uses coal as its energy source. About 75 per cent of all electricity generated in Alberta and 67 per cent of that generated in Saskatchewan is derived from domestic coal resources. Coal plays an important role in regional economies. This paper was prepared with the intent of providing a status report on the coal industry to the Energy and Mines Ministers while also identifying the challenges facing the industry. Productivity has been increased and emissions have been reduced, but the industry is facing risks. Cooperation between industry players and governments is required to ensure the long-term viability of the coal industry in Canada. Some recommendations were made by the Coal Association of Canada (CAC) as follows: (1) that the 21 per cent tax-rate to the mining sector be extended by the federal government, while continuing deductibility of the existing resource allowance, (2) that the Corporate Capital Tax be eliminated entirely by the federal government, or that at least for all assets located in rural areas, and (3) the CAC believes better solutions than the Kyoto Protocol exist (CAC does not support Kyoto). The CAC is of the opinion that continental approach should be favored for the reduction of greenhouse gas emissions. The CAC also believes that financial and technical resources should be allocated for the improvement of existing infrastructure and the development of new technologies in terms of reductions of emissions. refs

  17. Reports on research projects in the field of reactor safety sponsored by the Federal Minister for Research and Technology

    International Nuclear Information System (INIS)

    1978-09-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS - Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), der Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS - F Fortschrittsberichte (GRS - F - Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work. The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC Communities and the OECD. (orig./HP) 891 HP [de

  18. Reports on research projects sponsored by the Federal Minister for Research and Technology in the field of reactor safety

    International Nuclear Information System (INIS)

    1979-03-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS - Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS - F - Fortschrittsberichte (GRS - F - Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work. The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC European Communities and the OECD. (orig./HP) [de

  19. Remarks of Honorable Eleanor Norrie, Minister of the Nova Scotia Department of Natural Resources at the 1996 CORE conference

    International Nuclear Information System (INIS)

    Norrie, E.

    1996-10-01

    Speaking notes used by the Nova Scotia Minister of Natural Resources at the 1996 CORE Conference were provided. The presentation focused on the new Sable Offshore Energy Project, an important new offshore gas field being developed by Mobil Oil. The project represents a total investment of $3 billion, the biggest capital project ever undertaken in Nova Scotia, and is completely funded by the private sector. Nearly 4,000 jobs will be created during the offshore and onshore construction phase, as well as future tax revenues for the province, new business opportunities, infrastructure for future projects, and an estimated 11,000 'spin-off' jobs. To expedite the development process, the Government of Nova Scotia has recently established the Nova Scotia Offshore Energy Office to work exclusively on the Sable gas and pipeline project. Future plans include a gas processing plant for Guysborough County. The gas will be transported by pipeline across New Brunswick to the New England market. A proposal by Gaz Metropolitain is also expected which would have some of the gas transported to Quebec

  20. According to German Finance Minister Dr. Theodor Karl Helfferich “The Causes of of The First World War”

    Directory of Open Access Journals (Sweden)

    Mustafa ÇOLAK

    2015-12-01

    Full Text Available In history mankind has experienced the most devastating experience during the years of the First World War. This pre-war and war in the later stages of a decision taken individually, even thousands, even millions of lives have been directly or indirectly affected. Experiencing the process and outcome of the war rather than the causes of human history has so much more busy. Therefore, the cause of the war which works popularity continues even today. Concerning the reasons for the war period, written by the German Finance Minister Dr. Helfferich especially in England, including working with its allies in the war of public opinion in the state has led to many discussions concerning the reasons. Dr. Helfferich’s “The Beginning of Great War”; “German’s Case in The Supreme Court of Civilization”; was published under the title of The New York Times by the Fatherland company in 1915. Dr. Karl Helfferich’s study has been translated in different languages in following period. Keywords: Dr. Theodor Karl Helfferich, The First World War, Reşid Safvet Atabinen, Ottoman Empire, Germany.

  1. Report on the research projects in the field of reactor safety sponsored by the Federal Minister for Research and Technology

    International Nuclear Information System (INIS)

    1978-09-01

    Investigations on the safety of Light Water Reactors (LWR) being performed in the framework of the Research Program Reactor Safety (RS - Projects) are sponsored by the BMFT (Federal Minister for Research and Technology), Bundesminister fuer Forschung und Technologie. Objective of this program is to investigate in greater detail the safety margins of nuclear power plants and their systems and the further development of safety technology. Besides the investigations of LWR tasks first projects on the safety of FBR type reactors are sponsored by the BMFT. The GRS (Reactor Safety Association), Gesellschaft fuer Reaktorsicherheit mbH, by order of the BMFT, informs continuously of the status of such investigations by means of quarterly and annually publication of progress reports within the series GRS - F -Fortschrittsberichte (GRS - F - Progress Reports). Each progress report represents a compilation of individual reports about objectives, the work performed, the results, the next steps of the work etc. The individual reports are prepared in a standard form by the contractors themselves as a documentation of their progress in work, The individual reports are arranged according to the amended LWR Safety Research Program of the BMFT. Another table contents uses the same classification system as applied in the Nuclear Safety Index of the CEC Communities and the OECD. (orig./HP) 891 HP [de

  2. Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits

    Directory of Open Access Journals (Sweden)

    DOMINIKA GUZEK

    2016-06-01

    Full Text Available Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

  3. Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits.

    Science.gov (United States)

    Guzek, Dominika; Głąbska, Dominika; Głąbski, Krzysztof; Wierzbicka, Agnieszka

    2016-05-31

    Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

  4. Process optimization for ultrasonic vibration assisted polishing of micro-structured surfaces on super hard material

    Science.gov (United States)

    Sun, Zhiyuan; Guo, Bing; Rao, Zhimin; Zhao, Qingliang

    2014-08-01

    In consideration of the excellent property of SiC, the ground micro-structured surface quality is hard to meet the requirement - consequently the ultrasonic vibration assisted polishing (UVAP) of micro-structures of molds is proposed in this paper. Through the orthogonal experiment, the parameters of UVAP of micro-structures were optimized. The experimental results show that, abrasive polishing process, the effect of the workpiece feed rate on the surface roughness (Ra), groove tip radius (R) and material removal rate (MRR) of micro-structures is significant. While, the UVAP, the most significant effect factor for Ra, R and MRR is the ultrasonic amplitude of the ultrasonic vibration. In addition, within the scope of the polishing process parameters selected by preliminary experiments, ultrasonic amplitude of 2.5μm, polishing force of 0.5N, workpiece feed rate of 5 mm·min-1, polishing wheel rotational speed of 50rpm, polishing time of 35min, abrasive size of 100nm and the polishing liquid concentration of 15% is the best technology of UVAP of micro-structures. Under the optimal parameters, the ground traces on the micro-structured surface were removed efficiently and the integrity of the edges of the micro-structure after grinding was maintained efficiently.

  5. Antecedents of Accelerated Internationalisation of Polish and Czech Small and Medium-Sized Enterprises

    Directory of Open Access Journals (Sweden)

    Izabela Kowalik

    2017-09-01

    Full Text Available Objective: The study goal was the investigation of relationships between accelerated internationalisation descriptors and antecedent firm- and entrepreneur-related factors in Polish and Czech SMEs. Research Design & Methods: In order to compare Polish and Czech companies, the data collected in two independent studies were used. The study of 233 Polish companies was conducted with the use of CATI method in 2014; 108 Czech companies were surveyed in 2013/2014 with the use of CAWI method. In both samples half of the surveyed SME-exporters were conforming to the accelerated internationalisation criteria. Findings: In both samples the “global vision” elements and company internationalisation scale and speed were interrelated. In the Polish companies this relationship was moderated by company size. There was the lack of strong positive relationships between innovativeness and internationalisation speed and scale in both samples. Implications & Recommendations:The managerial mindset has a decisive role for accelerated internationalisation in both Czech and Polish SMEs. The innovativeness of offering is not indispensable for fast foreign expansion. Larger companies may expand abroad faster if they have internationally oriented managers. Contribution & Value Added:This work addresses a research gap concerning idiosyncrasies of internationalisation antecedents in Polish and Czech enterprises. As the results show, there is no common internationalisation pattern for Polish and Czech SMEs.

  6. The effect of different polishing systems on surface roughness and gloss of various resin composites.

    Science.gov (United States)

    Da Costa, Juliana; Ferracane, Jack; Paravina, Rade D; Mazur, Rui Fernando; Roeder, Leslie

    2007-01-01

    The purpose of this in vitro study was to evaluate the surface finish and gloss of five direct resin composites polished with six polishing systems. One hundred and fifty disk-shaped composite specimens (D=10.0 mm, 2-mm-thick, N=30 per material) were made. One side of each specimen was finished with a 16-fluted carbide finishing bur and then polished. Five specimens of each resin composite were randomly assigned to one of the six polishing systems. The surface roughness and gloss were measured with a surface profilometer and a glossmeter. The results were analyzed by two-way analysis of variance and Tukey's t-test (pgloss values between the composites and the polishing systems (p gloss value was recorded for Supreme + Pogo; the lowest was recorded for Z100 + Jiffy. Pogo showed the highest gloss values for all composites. The nanofill (Supreme) and minifill (Esthet-X) composites presented a surface roughness comparable to a microfill (Durafill), independent of the polishing system used, and a gloss comparable to a microfill, when polished with a one-step system (Pogo). As compared with the multiple-step systems, the smoothest surfaces and the highest gloss values were achieved using the one-step system (Pogo) for all the evaluated composites.

  7. Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

    Science.gov (United States)

    Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

    2013-07-01

    To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

  8. High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes

    Science.gov (United States)

    Hernandez-Garcia, C.; Bullard, D.; Hannon, F.; Wang, Y.; Poelker, M.

    2017-09-01

    The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (˜11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

  9. Evaluation of one-step micro polishers for residual resin removal after debonding on fluorosed teeth

    Directory of Open Access Journals (Sweden)

    Padmalatha Challa

    2014-01-01

    Full Text Available Aim and objectives: To evaluate the effectiveness of one step micro polishers for residual resin removal on fluorosed teeth using scanning electron microscope (SEM. Methods and Material: 55 teeth with mild to moderate fluorosis were selected with five teeth as control. Metal brackets were bonded onto 50 teeth which were divided into 5 groups. The finishing and polishing methods which were tested include tungsten carbide burs (TCB, multistep finishing system (Sof-Lex, one step polishers (PoGo and combination of TCB with multistep and one step polishing systems. After resin removal, all the samples were examined under SEM for assessment of the enamel surface. Results: The enamel surface was closest to untouched enamel in samples finished with the PoGo one step polishers followed by Sof-Lex multistep finishing system. However, they took the longest time to finish. TCB required the shortest time for residual resin removal. Conclusions: All polishing systems produce a certain degree of damage to the enamel surface with the smoothest surface being produced by one step polishers on fluorosed teeth.

  10. Novel cavitation fluid jet polishing process based on negative pressure effects.

    Science.gov (United States)

    Chen, Fengjun; Wang, Hui; Tang, Yu; Yin, Shaohui; Huang, Shuai; Zhang, Guanghua

    2018-04-01

    Traditional abrasive fluid jet polishing (FJP) is limited by its high-pressure equipment, unstable material removal rate, and applicability to ultra-smooth surfaces because of the evident air turbulence, fluid expansion, and a large polishing spot in high-pressure FJP. This paper presents a novel cavitation fluid jet polishing (CFJP) method and process based on FJP technology. It can implement high-efficiency polishing on small-scale surfaces in a low-pressure environment. CFJP uses the purposely designed polishing equipment with a sealed chamber, which can generate a cavitation effect in negative pressure environment. Moreover, the collapse of cavitation bubbles can spray out a high-energy microjet and shock wave to enhance the material removal. Its feasibility is verified through researching the flow behavior and the cavitation results of the negative pressure cavitation machining of pure water in reversing suction flow. The mechanism is analyzed through a computational fluid dynamics simulation. Thus, its cavitation and surface removal mechanisms in the vertical CFJP and inclined CFJP are studied. A series of polishing experiments on different materials and polishing parameters are conducted to validate its polishing performance compared with FJP. The maximum removal depth increases, and surface roughness gradually decreases with increasing negative outlet pressures. The surface becomes smooth with the increase of polishing time. The experimental results confirm that the CFJP process can realize a high material removal rate and smooth surface with low energy consumption in the low-pressure environment, together with compatible surface roughness to FJP. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Upgrade of pipelines operated in a Polish conditions in accordance with European Standards

    International Nuclear Information System (INIS)

    Witek, M.

    2007-01-01

    This paper presents some aspects of changing polish technical requirements concerning high pressure gas pipelines in accordance with European Norm 1594 '' Gas supply system. Pipelines with maximum operating pressure over 16 bar. Functional requirements ''. An additional class location of the steel pipelines was analyzed and supported by the results on numerous pipeline cases in Poland. Minimum distances between pipelines and buildings are given as a proposal to upgrading polish technical law in the area of the gas grid. Special attention in analysis was given to the polish existing high pressure gas network and calculation examples of existing types of steel used in pipeline construction in the past. (author)

  12. New surface modification method of bio-titanium alloy by EB polishing

    International Nuclear Information System (INIS)

    Okada, Akira; Uno, Yoshiyuki; Iio, Atsuo; Fujiwara, Kunihiko; Doi, Kenji

    2008-01-01

    A new surface modification for bio-titanium alloy products by electron beam (EB) polishing is proposed. In this EB polishing method, high energy density EB can be irradiated without concentrating the beam. Therefore, large-area EB with a maximum diameter of 60 mm can be used for instantaneously melting or evaporating metal surface. Experimental results made it clear that surface characteristics, such as repellency, corrosion resistance and coefficient of friction could be improved simultaneously with the surface smoothing in a few minutes under a proper condition. Therefore, EB polishing method has a possibility of high efficient surface smoothing and surface modification process for bio-titanium alloy. (author)

  13. Polish students at the Académie Julian until 1919

    Directory of Open Access Journals (Sweden)

    Zgórniak, Marek

    2012-08-01

    Full Text Available The subject of the article is the presence of Polish students in the most important private artistic school in Paris in the second half of the 19thcentury. The extant records regarding the atelier for male students made it possible to compile a list of about 165 Polish painters and sculptors studying there in the period from 1880 to 1919. The text presents the criteria used when preparing the list and the diagrams show the fluctuations in registration and the number of Polish artists in particular ateliers in successive years. The observations contained in the article have a summary nature and are illustrated only with selected examples.

  14. Effects of different polishing techniques on the surface roughness of dental porcelains

    Directory of Open Access Journals (Sweden)

    Işil Sarikaya

    2010-02-01

    Full Text Available OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm were prepared for each feldspathic (Vita VMK 95, Ceramco III and low-fusing dental porcelain (Matchmaker. Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II, (12x14x18 mm were cut into 2-mm-thick slices (12x14 mm with low speed saw. The prepared specimens were divided into 11 groups (n=5 representing different polishing techniques including control ((C no surface treatment, glaze (G and other 9 groups that were finished and polished with polishing discs (Sof-Lex (Sl, two porcelain polishing kits (NTI (Pk, Dialite II (Di, a diamond polishing paste (Sparkle (Sp, a zirconium silicate based cleaning and polishing prophy paste (Zircate (Zr, an aluminum oxide polishing paste (Prisma Gloss (Pg, and combinations of them. The surface roughness of all groups was measured with a profilometer. The data were analyzed with a 2-way analysis of variance, and the mean values were compared by the Tukey Honestly Significant Difference test (a=0.05. RESULTS: For all porcelain material groups, the lowest Ra values were observed in Group Gl, Group Sl, Group Pk, and Group Di, which were not significantly different from each other (p>0.05.When comparing the 4 different porcelain materials, the machinable feldspathic porcelain block group (Mark II demonstrated statistically significantly less Ra values than the other porcelain materials tested (p<0.05. No significant difference was observed between the VMK 95 and Ceramco III porcelain groups (p=0.919, also these groups demonstrated the highest Ra values. CONCLUSION: Subjected to surface roughness, the surfaces obtained with polishing and/or cleaning-prophy paste materials used alone were rougher compared to the surfaces finished using Sof-lex, Dialite, and NTI polishing kit

  15. Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

    Directory of Open Access Journals (Sweden)

    Gerda Vaitkūnaitė

    2015-03-01

    Full Text Available The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treated and untreated areas of the material has been made.

  16. Interpretation of Ukrainian and Polish Adverbial Word Equivalents Form and Meaning Interaction in National Explanatory Lexicography

    Directory of Open Access Journals (Sweden)

    Alla Luchyk

    2015-06-01

    Full Text Available Interpretation of Ukrainian and Polish Adverbial Word Equivalents Form and Meaning Interaction in National Explanatory Lexicography The article proves the necessity and possibility of compiling dictionaries with intermediate existence status glossary units, to which the word equivalents belong. In order to form the Ukrainian-Polish dictionary glossary of this type the form and meaning analysis of Ukrainian and Polish word equivalents is done, the common and distinctive features of these language system elements are described, the compiling principles of such dictionary are clarified.

  17. Sword of Christ. Christian inspirations of Polish socialism before the January Uprising

    Directory of Open Access Journals (Sweden)

    Piotr Kuligowski

    2012-06-01

    Full Text Available The article presents the history of the Christian fraction of Polish socialism against the background of the era, from the very beginning until its end after the January Uprising. On the basis of the texts from the era the understanding of socialism, the principles of the program of Clusters of the Polish People and the anatomy of Fr. Piotr Ściegienny’s conspiracy have been reconstructed. The text reproduces the utopian ideas of social reconstruction by Zenon Świętosławski and Ludwik Królikowski and based on these the text also shows the place of Christian socialism in the Polish socialist thought.

  18. Apparatus and method for deterministic control of surface figure during full aperture polishing

    Science.gov (United States)

    Suratwala, Tayyab Ishaq; Feit, Michael Dennis; Steele, William Augustus

    2013-11-19

    A polishing system configured to polish a lap includes a lap configured to contact a workpiece for polishing the workpiece; and a septum configured to contact the lap. The septum has an aperture formed therein. The radius of the aperture and radius the workpiece are substantially the same. The aperture and the workpiece have centers disposed at substantially the same radial distance from a center of the lap. The aperture is disposed along a first radial direction from the center of the lap, and the workpiece is disposed along a second radial direction from the center of the lap. The first and second radial directions may be opposite directions.

  19. Apparatus and method for deterministic control of surface figure during full aperture pad polishing

    Science.gov (United States)

    Suratwala, Tayyab Ishaq; Feit, Michael Douglas; Steele, William Augustus

    2017-10-10

    A polishing system configured to polish a lap includes a lap configured to contact a workpiece for polishing the workpiece; and a septum configured to contact the lap. The septum has an aperture formed therein. The radius of the aperture and radius the workpiece are substantially the same. The aperture and the workpiece have centers disposed at substantially the same radial distance from a center of the lap. The aperture is disposed along a first radial direction from the center of the lap, and the workpiece is disposed along a second radial direction from the center of the lap. The first and second radial directions may be opposite directions.

  20. Electroluminescence Analysis by Tilt Polish Technique of InP-Based Semiconductor Lasers

    Science.gov (United States)

    Ichikawa, Hiroyuki; Sasaki, Kouichi; Hamada, Kotaro; Yamaguchi, Akira

    2010-03-01

    We developed an effective electroluminescence (EL) analysis method to specify the degraded region of InP-based semiconductor lasers. The EL analysis method is one of the most important methods for failure analysis. However, EL observation was difficult because opaque electrodes surround an active layer. A portion of each electrode had to be left intact for wiring to inject the current. Thus, we developed a partial polish technique for the bottom electrode. Tilt polish equipment with a rotating table was introduced; a flat polished surface and a sufficiently wide remaining portion of the bottom electrode were obtained. As a result, clear EL from the back surface of the laser was observed.