Diagnostic radiology 1987

International Nuclear Information System (INIS)

Margulis, A.R.; Gooding, C.A.

1987-01-01

This is the latest version of the continuing education course on diagnostic radiology given yearly by the Department of Radiology at the University of California, San Francisco. The lectures are grouped into sections on gastrointestinal radiology, mammography, uroradiology, magnetic resonance, hepatobiliary radiology, pediatric radiology, ultrasound, interventional radiology, chest radiology, nuclear medicine, cardiovascular radiology, and skeletal radiology. Each section contains four to eight topics. Each of these consists of text that represents highlights in narrative form, selected illustrations, and a short bibliography. The presentation gives a general idea of what points were made in the lecture

A review of scientific topics and literature in abdominal radiology in Germany. Pt. 1. Gastrointestinal tract; Aktuelle Schwerpunkte und Literatur der Abdominalradiologie im deutschsprachigen Raum. T. 1. Gastrointestinaltrakt

Energy Technology Data Exchange (ETDEWEB)

Schreyer, A.G. [University Hospital Regensburg (Germany). Dept. of Radiology; Wessling, J. [Clemens Hospital, Muenster (Germany). Clinic for Radiology; Kinner, S.; Lauenstein, T.C. [University Hospital Essen (Germany). Dept. of Radiology; Juchems, M.S. [Konstanz Hospital (Germany). Dept. of Diagnostic and Interventional Radiology; Holzapfel, K. [Technical University Munich (Germany). Inst. of Radiology; Konietzke, P. [University Hospital Heidelberg (Germany). Dept. of Diagnostic and Interventional Radiology; Grenacher, L. [Diagnostic Muenchen - Diagnostic Imaging Center, Munich (Germany)

2016-02-15

The working group for abdominal and gastrointestinal diagnosis is a group of the German Radiological Society (DRG) focusing clinically and scientifically on the diagnosis and treatment of the gastrointestinal tract with all parenchymatous abdominal organs. In addition to the clinical and scientific further development of abdominal radiology, the education of radiologists within this core discipline of radiology is one of the major aims. In this article we give an up-to-date literature review of scientific radiological topics especially covered by German radiologists. This manuscript focuses on the most recent literature on the diagnosis of the stomach, small bowel, colon and rectum. The review with a focus on the most recent studies published by German radiologists concludes with a synopsis of mesenterial bleeding and ischemia followed by a critical appraisal of the current literature on conventional abdominal radiography.

Radiological Atlas of Gastrointestinal Disease

International Nuclear Information System (INIS)

Nolan, D.J.

1983-01-01

This book is a reference to gastrointestinal disease and radiographic methods. It provides complete information for diagnosis and management and includes coverage of plain radiography, barium studies, water-soluble contrast studies, and more

Radiologic findings of submucosal tumors of gastrointestinal tract

Energy Technology Data Exchange (ETDEWEB)

Lee, Eun Ja; Ahn, In Oak; You, Jin Jong [College of Medicine, Gyeongsang National University, Chinju (Korea, Republic of)

2000-05-01

Gastrointestinal submucosal tumors originate from submucosal histologic structures such as muscles, lymph nodes, nerves, fibers and vessels. Most patients are asymptomatic. Lesions that are large or ulcerated may cause abdominal pain or upper gastrointestinal bleeding, and those that grow intraluminally sometimes become pedunculated and occasionally prolapse to cause intussusception. Adenocarcinoma is the most common primary gastrointestinal tumor, accounting for approximately 90-95% of such lesions, while submucosal tumors account for approximately 2-6% of all gastrointestinal tumors. Because their overlying mucosa appears normal, submucosal tumors age after difficult to visualize endoscopically, and for this reason, barium studies or CT scans are helpful for diagnosis. In this paper, variable CT and barium study findings of the different types of gastrointestinal submucosal tumor are demonstrated, and a brief discussion of the respective disease entities is included. (author)

Radiologic findings of submucosal tumors of gastrointestinal tract

International Nuclear Information System (INIS)

Lee, Eun Ja; Ahn, In Oak; You, Jin Jong

2000-01-01

Gastrointestinal submucosal tumors originate from submucosal histologic structures such as muscles, lymph nodes, nerves, fibers and vessels. Most patients are asymptomatic. Lesions that are large or ulcerated may cause abdominal pain or upper gastrointestinal bleeding, and those that grow intraluminally sometimes become pedunculated and occasionally prolapse to cause intussusception. Adenocarcinoma is the most common primary gastrointestinal tumor, accounting for approximately 90-95% of such lesions, while submucosal tumors account for approximately 2-6% of all gastrointestinal tumors. Because their overlying mucosa appears normal, submucosal tumors age after difficult to visualize endoscopically, and for this reason, barium studies or CT scans are helpful for diagnosis. In this paper, variable CT and barium study findings of the different types of gastrointestinal submucosal tumor are demonstrated, and a brief discussion of the respective disease entities is included. (author)

Complications of nonbiliary laparoscopic gastrointestinal surgery : Radiologic findings and clinical courses

Energy Technology Data Exchange (ETDEWEB)

Jung, Seon Ah; Lee, Sang Hoon; Won, Yong Sung; Park, Young Ha; Kim, Jun Gi [St. Vincent' s Hospital, College of Medicine, The Catholic University, Suwon (Korea, Republic of); Kim, Hyun [St. Mary' s Hospital, College of Medicine, The Catholic University, Taejon (Korea, Republic of)

2000-05-01

To evaluate the radiological findings and clinical course of the complications arising after nonbiliay laparoscopic gastrointestinal surgery (NLGS). We retrospectively reviewed the clinical records of 131 patients who underwent NLGS (83 cases involving colorectal surgery, 18 splenectomies, 14 appendectomies, ten adrenalectomies, three lumbar sympathectomies, two Duhamel's operation, and one peptic ulcer perforation repair) over a four-year period. Among these 131 patients, the findings of fifteen in whom postoperative complications were confirmed were analysed. The radiologic examinations these patients underwent included CT (n=3D8), barium enema and fistulography (n=3D4), ultrasonography (n=3D3), ascending venography of the lower legs (n=3D2), and penile Doppler sonography (n=3D1). We evaluated the radiologic findings and clinical courses of early (within 2 weeks) and late (after 2 weeks) postoperative complications. Sixteen cases of postoperative complications developed in fifteen patients ; in 14 (17%) after colorectal surgery and in one (6%) after splenectomy. Eleven of the sixteen cases (69%) involved early complications, consisting of an abscess in three, ischemic colitis in two, hemoperitoneum in one, perforation of the colon in one, pancreatitis in one, recto-vaginal fistula in one, deep vein thrombosis after colorectal surgery in one, and abscess after splenectomy in one. The remaining five cases (31%) involved late complications which developed after colorectal surgery, comprising anastomosic site stricture in two, abdominal wall (trocar site) metastasis in one, colo-cutaneous fistula in one, and impotence in one. Among the 16 cases involving postoperative complications, recto-vaginal fistula, colon perforation, and abdominal wall metastasis were treated by surgery, while the other thirteen cases were treated conservatively. Various postoperative complications develop after NLGS, with a higher rate of these being noted in cases involving colorectal

Complications of nonbiliary laparoscopic gastrointestinal surgery : Radiologic findings and clinical courses

International Nuclear Information System (INIS)

Jung, Seon Ah; Lee, Sang Hoon; Won, Yong Sung; Park, Young Ha; Kim, Jun Gi; Kim, Hyun

2000-01-01

To evaluate the radiological findings and clinical course of the complications arising after nonbiliay laparoscopic gastrointestinal surgery (NLGS). We retrospectively reviewed the clinical records of 131 patients who underwent NLGS (83 cases involving colorectal surgery, 18 splenectomies, 14 appendectomies, ten adrenalectomies, three lumbar sympathectomies, two Duhamel's operation, and one peptic ulcer perforation repair) over a four-year period. Among these 131 patients, the findings of fifteen in whom postoperative complications were confirmed were analysed. The radiologic examinations these patients underwent included CT (n=3D8), barium enema and fistulography (n=3D4), ultrasonography (n=3D3), ascending venography of the lower legs (n=3D2), and penile Doppler sonography (n=3D1). We evaluated the radiologic findings and clinical courses of early (within 2 weeks) and late (after 2 weeks) postoperative complications. Sixteen cases of postoperative complications developed in fifteen patients ; in 14 (17%) after colorectal surgery and in one (6%) after splenectomy. Eleven of the sixteen cases (69%) involved early complications, consisting of an abscess in three, ischemic colitis in two, hemoperitoneum in one, perforation of the colon in one, pancreatitis in one, recto-vaginal fistula in one, deep vein thrombosis after colorectal surgery in one, and abscess after splenectomy in one. The remaining five cases (31%) involved late complications which developed after colorectal surgery, comprising anastomosic site stricture in two, abdominal wall (trocar site) metastasis in one, colo-cutaneous fistula in one, and impotence in one. Among the 16 cases involving postoperative complications, recto-vaginal fistula, colon perforation, and abdominal wall metastasis were treated by surgery, while the other thirteen cases were treated conservatively. Various postoperative complications develop after NLGS, with a higher rate of these being noted in cases involving colorectal

Retrospective analysis and think of original papers of gastrointestinal imageology for 46 years in chinese journal of radiology

International Nuclear Information System (INIS)

Cheng Yingsheng; Shang Kezhong

2001-01-01

Objective: To retrospectively analyze and think the original papers of gastrointestinal (GI) imageology for 46 years in Chinese Journal of Radiology (CJR), meeting a huge challenge of Chinese GI imageology in alternation of generations. Methods: From October 1953 to October 1999, a review of original articles of GI imageology in CJR was conducted. Results: Within 46 years of GI imageology evolution, 211 published original articles of CJR included 79 original papers of radiography and single contrast radiography, 73 original papers of double contrast radiography, 21 original paper of interventional radiology, 15 original papers of CT and MR and CR (computed radiography), 9 original papers of experiment study, and 4 original papers of comprehensive imaging applications. There were different dominant imaging applications at different times, radiography and single contrast radiography in fifties and sixties, double contrast radiography and CT diagnosis in seventies and eighties, and comprehensive applications of CT and MR and CR and interventional radiology in nineties. Conclusion: In GI imageology for 46 years, double contrast radiography in X-ray diagnosis was the main method of imaging diagnosis, CT and MR and CR diagnosis were important means of recruit; interventional radiology was an important section of GI imageology in nineties

Recurrent APC gene mutations in Polish FAP families

Directory of Open Access Journals (Sweden)

Pławski Andrzej

2007-12-01

Full Text Available Abstract The molecular diagnostics of genetically conditioned disorders is based on the identification of the mutations in the predisposing genes. Hereditary cancer disorders of the gastrointestinal tracts are caused by mutations of the tumour suppressor genes or the DNA repair genes. Occurrence of recurrent mutation allows improvement of molecular diagnostics. The mutation spectrum in the genes causing hereditary forms of colorectal cancers in the Polish population was previously described. In the present work an estimation of the frequency of the recurrent mutations of the APC gene was performed. Eight types of mutations occurred in 19.4% of our FAP families and these constitute 43% of all Polish diagnosed families.

MEMO radiology

International Nuclear Information System (INIS)

Wagner-Manslau, C.

1989-01-01

This radiology volume is a concise handbook of imaging techniques, nuclear medicine, and radiation therapy, albeit that the main emphasis is on classic radiology. It offers, for instance, a survey of radiological findings for the most frequent pathological conditions, many overviews of differential diagnosis, a glossary of the technical bases of radiology and so forth. The contents are divided into the following chapters: Physical and biological bases; skeleton; thorax with the subdivisions lungs, heart, mediastinum, and pleura; gastrointestinal tract with the subsections esophagus, small and large intestine; liver; biliary tract; pancreas; retroperitoneal space; kidney; suprarenal glands; bladder; blood vessels, lymph nodes, spleen; mammary glands; female genitals; prostate and scrotum, epididymis and seminal vesicle. (orig./MG) With 23 figs [de

Radiological manifestations of intestinal tuberculosis

International Nuclear Information System (INIS)

Im, Jae Hoon

1974-01-01

Radiological findings of 87 cases of intestinal tuberculosis are analyzed and presented. The diagnosis was based on histopathology in 29 cases, and on clinical ground and radiological findings in 58 cases. The radio of male and female patients was 4:6, and peak incidence is between 10 and 30. Abdominal pain, diarrhea, weight loss, fever and general weakness are frequent symptoms, and tenderness of abdomen, ascites with abdominal distension, malnutrition and emaciation are frequent signs of the patients. Laboratory investigation reveal anemia, raised ESR, hypoalbuminaemia and positive occult blood reaction in the stool in most of the patients. Chest film show activity pulmonary tuberculosis in only 1/3 patients. There is no pathognomonic radiological findings in intestinal tuberculosis and their manifestations are protean, and differentiation from other inflammatory diseases and malignant tumors in gastrointestinal tract is very difficult on radiological ground alone. However, in patients with complaining vague abdominal symptoms and signs, the radiological diagnosis is most certain means in the decision of existence of organic lesion and suggestion of tuberculosis in the gastrointestinal tract and its extent as yet. Multiplicity of the lesion, involvement of adjacent organ such as peritoneum or mesenteric lymph nodes, typical nodularity or irregularity of mesenteric border and existence of active pulmonary tuberculosis are the suggestive findings of intestinal tuberculosis. In the diagnosis of inflammatory disease or malignant tumor of gastrointestinal tract, the possibility of tuberculosis should be borne in mind, and vice versa

Radiological manifestations of intestinal tuberculosis

Energy Technology Data Exchange (ETDEWEB)

Im, Jae Hoon [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1974-10-15

Radiological findings of 87 cases of intestinal tuberculosis are analyzed and presented. The diagnosis was based on histopathology in 29 cases, and on clinical ground and radiological findings in 58 cases. The radio of male and female patients was 4:6, and peak incidence is between 10 and 30. Abdominal pain, diarrhea, weight loss, fever and general weakness are frequent symptoms, and tenderness of abdomen, ascites with abdominal distension, malnutrition and emaciation are frequent signs of the patients. Laboratory investigation reveal anemia, raised ESR, hypoalbuminaemia and positive occult blood reaction in the stool in most of the patients. Chest film show activity pulmonary tuberculosis in only 1/3 patients. There is no pathognomonic radiological findings in intestinal tuberculosis and their manifestations are protean, and differentiation from other inflammatory diseases and malignant tumors in gastrointestinal tract is very difficult on radiological ground alone. However, in patients with complaining vague abdominal symptoms and signs, the radiological diagnosis is most certain means in the decision of existence of organic lesion and suggestion of tuberculosis in the gastrointestinal tract and its extent as yet. Multiplicity of the lesion, involvement of adjacent organ such as peritoneum or mesenteric lymph nodes, typical nodularity or irregularity of mesenteric border and existence of active pulmonary tuberculosis are the suggestive findings of intestinal tuberculosis. In the diagnosis of inflammatory disease or malignant tumor of gastrointestinal tract, the possibility of tuberculosis should be borne in mind, and vice versa.

Imaging of gastrointestinal stromal tumour (GIST)

International Nuclear Information System (INIS)

Lau, S.; Tam, K.F.; Kam, C.K.; Lui, C.Y.; Siu, C.W.; Lam, H.S.; Mak, K.L.

2004-01-01

Gastrointestinal stromal tumour (GIST) represents the most common kind of mesenchymal tumour that arises from the alimentary tract. GIST is currently defined as a gastrointestinal tract mesenchymal tumour containing spindle cells (or less commonly epithelioid cells or rarely both) and showing CD117 (c-kit protein) positivity. Targeted molecular therapy of non-resectable GIST using imatinib, a specific tyrosine kinase receptor inhibitor, represents a real milestone in the management of solid malignancy. Imaging studies, both anatomical and functional, are playing an increasingly important role in management of patients with GIST. This review illustrates the radiological appearance of GISTs and the site-specific roles of each imaging tool. Clinical features and radiological differential diagnosis of GIST are also discussed

Management and follow-up of gallbladder polyps : Joint guidelines between the European Society of Gastrointestinal and Abdominal Radiology (ESGAR), European Association for Endoscopic Surgery and other Interventional Techniques (EAES), International Society of Digestive Surgery - European Federation (EFISDS) and European Society of Gastrointestinal Endoscopy (ESGE).

Science.gov (United States)

Wiles, Rebecca; Thoeni, Ruedi F; Barbu, Sorin Traian; Vashist, Yogesh K; Rafaelsen, Søren Rafael; Dewhurst, Catherine; Arvanitakis, Marianna; Lahaye, Max; Soltes, Marek; Perinel, Julie; Roberts, Stuart Ashley

2017-09-01

The management of incidentally detected gallbladder polyps on radiological examinations is contentious. The incidental radiological finding of a gallbladder polyp can therefore be problematic for the radiologist and the clinician who referred the patient for the radiological examination. To address this a joint guideline was created by the European Society of Gastrointestinal and Abdominal Radiology (ESGAR), European Association for Endoscopic Surgery and other Interventional Techniques (EAES), International Society of Digestive Surgery - European Federation (EFISDS) and European Society of Gastrointestinal Endoscopy (ESGE). A targeted literature search was performed and consensus guidelines were created using a series of Delphi questionnaires and a seven-point Likert scale. A total of three Delphi rounds were performed. Consensus regarding which patients should have cholecystectomy, which patients should have ultrasound follow-up and the nature and duration of that follow-up was established. The full recommendations as well as a summary algorithm are provided. These expert consensus recommendations can be used as guidance when a gallbladder polyp is encountered in clinical practice. • Management of gallbladder polyps is contentious • Cholecystectomy is recommended for gallbladder polyps >10 mm • Management of polyps <10 mm depends on patient and polyp characteristics • Further research is required to determine optimal management of gallbladder polyps.

Digital imaging in diagnostic radiology

International Nuclear Information System (INIS)

Newell, J.D. Jr.; Kelsey, C.A.

1990-01-01

This monograph on digital imaging provides a basic overview of this field at the present time. This paper covers clinical application, including subtraction angiography; chest radiology; genitourinary, gastrointestinal, and breast radiology; and teleradiology. The chest section also includes an explanation of multiple beam equalization radiography. The remaining chapters discuss some of the technical aspects of digital radiology. It includes the basic technology of digital radiography, image compression, and reconstruction information on the economics of digital radiography

Acute radiologic intervention in gastrointestinal bleeding

Energy Technology Data Exchange (ETDEWEB)

Lesak, F.

1986-01-01

A case of embolization of the gastroduodenal artery in a 38-year old man with chronic pancreatitis and uncontrollable bleeding is presented. The advantage of this interventional radiologic procedure is discussed and in selective cases it seems to be the choice of treatment.

Acute radiologic intervention in gastrointestinal bleeding

International Nuclear Information System (INIS)

Lesak, F.

1986-01-01

A case of embolization of the gastroduodenal artery in a 38-year old man with chronic pancreatitis and uncontrollable bleeding is presented. The advantage of this interventional radiologic procedure is discussed and in selective cases it seems to be the choice of treatment. (orig.) [de

An upper gastrointestinal ulcer still bleeding after endoscopy : what comes next?

NARCIS (Netherlands)

Craenen, E. M. E.; Hofker, Hendrik; Peters, Frans; Kater, G. M.; Glatman, K. R.; Zijlstra, J. G.

Introduction: Recurrent bleeding from an upper gastrointestinal ulcer when endoscopy fails is a reason for radiological or surgical treatment, both of which have their advantages and disadvantages. Case: Based on a patient with recurrent gastrointestinal bleeding, we reviewed the available evidence

Complementary roles of interventional radiology and therapeutic endoscopy in gastroenterology

DEFF Research Database (Denmark)

Ray, David M; Srinivasan, Indu; Tang, Shou-Jiang

2017-01-01

radiology have resulted in the paradigm shift in the management of these conditions. In this paper, we discuss the patient's work up, indications, and complementary roles of endoscopic and angiographic management in the settings of gastrointestinal bleeding, enteral feeding, cecostomy tube placement...... and luminal strictures. These conditions often require multidisciplinary approaches involving a team of interventional radiologists, gastroenterologists and surgeons. Further, the authors also aim to describe how the fields of interventional radiology and gastrointestinal endoscopy are overlapping...

Narcotic smuggling and radiography of the gastrointestinal tract

International Nuclear Information System (INIS)

Pamilo, M.; Suoranta, H.; Suramo, I.

1986-01-01

The gastrointestinal tract is being used to an increasing extent as a route for smuggling narcotics. Small, swallowed packages overwrapped with condoms or other materials are usually not detected by the customs authorities. Conventional abdominal radiography may indicate foreign bodies surrounded by a characteristic thin layer of gas and located in the gastrointestinal tract. Some short case histories, and the radiologic findings in four heroin 'body packers' are presented. (orig.)

Behcet's syndrome involving the gastrointestinal tract - a diagnostic dilemma in childhood

International Nuclear Information System (INIS)

Stringer, D.A.; Daneman, A.; Cleghorn, G.J.; Durie, P.R.; Hamilton, J.R.

1986-01-01

Behcet's syndrome is very rare in children, especially those under 10 years of age. Clinical and radiological features are described in 4 children, including 2 under the age of 5 years, with the syndrome. As in other pediatric cases reported, the incomplete form of Behcet's syndrome was present in each case. All 4 patients had oral and genital mucosal effects, arthritis and gastrointestinal and dermatological manifestations. Ophthalmological symptoms occurred in only 1 patient. Radiologically, the 4 cases demonstrated the spectrum of gastrointestinal involvement, from minimal irregularity and thickening of the terminal ileum to gross irregularity and deformity of the terminal ileum and cecum. Because of the difficulty in differentiating Behcet's syndrome from other forms of inflammatory bowel disease it is suggested that in children with gastrointestinal involvement, 3 major criteria be present before the diagnosis of Behcet's syndrome is made. (orig.)

Interdisciplinary Canadian guidelines on the use of metal stents in the gastrointestinal tract for oncological indications

International Nuclear Information System (INIS)

Baerlocher, M.O.; Asch, M.R.; Dixon, P.; Kortan, P.; Myers, A.; Law, C.

2008-01-01

To provide evidence-based guidelines regarding the appropriate use of gastrointestinal stents for oncologic indications. This document describes the use of gastrointestinal stents by appropriately trained physicians. This document is based on a review of the published evidence and supplemented by consensus expert opinion. Gastrointestinal stenting has been evaluated in terms of technical success, complications, patient satisfaction, clinical outcome, and cost-benefit analysis. This document was approved by the Canadian Interventional Radiology Association; approval from the other relevant Canadian societies is pending. Gastrointestinal stenting has a valuable role in the management of the gastrointestinal malignancy. The decision to use such devices should be taken after comprehensive multidisciplinary clinical, endoscopic, and radiologic evaluation. This interdisciplinary Canadian guideline on the use of metal stents in the gastrointestinal tract for ontological indications is based on a scientific literature review and relevant clinical experience. This guideline attempts to define principles of practice for most circumstances, though adherence to this guideline will not, of course, produce successful outcomes in every case. (author)

Interdisciplinary Canadian guidelines on the use of metal stents in the gastrointestinal tract for oncological indications

Energy Technology Data Exchange (ETDEWEB)

Baerlocher, M.O. [Dept. of Radiology, Univ. of Toronto, Toronto, Ontario (Canada)], E-mail: mark.baerlocher@utoronto.ca; Asch, M.R. [Dept. of Diagnostic Imaging, Lakeridge Health Corp., Oshawa, Ontario (Canada); Dixon, P. [Dept. of Radiation Oncology, Durham Regional Cancer Centre, Oshawa, Ontario (Canada); Dept. of Oncology, Queen' s Univ., Kingston, Ontario (Canada); Kortan, P. [Div. of Gastroenterology, Dept. of Medicine, St. Michael' s Hospital, Toronto, Ontario (Canada); Myers, A. [Dept. of Diagnostic Imaging, Lakeridge Health Corp., Oshawa, Ontario (Canada); Law, C. [Dept. of Surgical Oncology, Div. of General Surgery, Sunnybrook HSC, Toronto, Ontario (Canada)

2008-06-15

To provide evidence-based guidelines regarding the appropriate use of gastrointestinal stents for oncologic indications. This document describes the use of gastrointestinal stents by appropriately trained physicians. This document is based on a review of the published evidence and supplemented by consensus expert opinion. Gastrointestinal stenting has been evaluated in terms of technical success, complications, patient satisfaction, clinical outcome, and cost-benefit analysis. This document was approved by the Canadian Interventional Radiology Association; approval from the other relevant Canadian societies is pending. Gastrointestinal stenting has a valuable role in the management of the gastrointestinal malignancy. The decision to use such devices should be taken after comprehensive multidisciplinary clinical, endoscopic, and radiologic evaluation. This interdisciplinary Canadian guideline on the use of metal stents in the gastrointestinal tract for ontological indications is based on a scientific literature review and relevant clinical experience. This guideline attempts to define principles of practice for most circumstances, though adherence to this guideline will not, of course, produce successful outcomes in every case. (author)

Radiology trainer. Torso, internal organs and vessels. 2. ed.

International Nuclear Information System (INIS)

Staebler, Axel; Erlt-Wagner, Birgit

2013-01-01

The radiology training textbook is based on case studies of the clinical experience, including radiological imaging and differential diagnostic discussion. The scope of this volume covers the torso, internal organs and vessels. The following issues are discussed: lungs, pleura, mediastinum; heart and vascular system; upper abdomen organs; gastrointestinal tract; urogenital system.

2. All-Polish Seminar: Monitoring of Radioactive Environment Contamination Using ASS-500 and PMS Stations

International Nuclear Information System (INIS)

1998-01-01

During last 10 years the modern system of radiological pollution monitoring has been developed in Poland. At the beginning it was composed of ASS-500 stations. At the end of 1995 five automatic PMS stations have been installed as the result of the collaboration between Polish and Danish governments. Several stations of both types were include later. The system is coordinated by Central Laboratory for Radiological Protection. The report reviews the meeting dedicated to problems and future developments of the system

Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

Directory of Open Access Journals (Sweden)

Violetta Koseska-Toszewa

2015-11-01

Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

Transcatheter arterial embolisation in upper gastrointestinal bleeding in a sample of 29 patients in a gastrointestinal referral center in Germany.

Science.gov (United States)

Heining-Kruz, S; Finkenzeller, T; Schreyer, A; Dietl, K H; Kullmann, F; Paetzel, C; Schedel, J

2015-09-01

This is a retrospective analysis of interventional embolisation performed with catheter angiography in 29 patients with upper gastrointestinal bleeding in the setting of a secondary care hospital. From April 2007 to February 2013, 29 patients with upper gastrointestinal bleeding underwent endovascular diagnostics and treatment. The diagnosis was established by endoscopy, computed tomography or clinically based on a significant decrease in hemoglobin. Transcatheter arterial embolisation was performed with coils, liquid embolic agents, and particles. The technical and clinical outcomes were assessed by postinterventional endoscopy, hemoglobin concentrations, number of necessary transfusions, or surgical interventions, as well as by post-interventional mortality within 28 days after the procedure. Selective angiographic embolisation in upper gastrointestinal bleeding was primarily successful technically and clinically in 22 of 29 patients. In 4/29 cases an angiographic reintervention was performed, which was successful in 3 cases. In 3 cases of primarily technically unsuccessful procedures reintervention was not attempted. No catheterisation-related complications were recorded. Peri-interventional mortality was 31%, but only 2 of these patients died due to uncontrolled massive bleeding, whereas the lethal outcome in the other 7 patients was due to their underlying diseases. Transcatheter arterial embolisation is an effective and rapid method in the management of upper gastrointestinal bleeding. Radiological endovascular interventions may considerably contribute to reduced mortality in GI bleeding by avoiding a potential surgical procedure following unsuccessful endoscopic treatment. The study underlines the importance of the combination of interventional endoscopy with interventional radiology in secondary care hospitals for patient outcome in complex and complicated upper gastrointestinal bleeding situations. © Georg Thieme Verlag KG Stuttgart · New York.

Gastrointestinal Stromal Tumor: Diagnosis and Prognosis; Tumor estromal gastrointestinal: diagnostico y pronostico

Energy Technology Data Exchange (ETDEWEB)

Martin, M. T.; Olmedilla, P.; Gonzalez, S.; Oliver, J. M. [Fundacion Hospital de Alcorcon. Madrid (Spain)

2003-07-01

Gastrointestinal stromal tumors (GIST) are mesenquimal tumors derived from cell precursors. They have the capacity for myogenic and neurogenic differentiation and are characterized by expression of KIT protein (tyrosine kinase growth factor). Clinically, they exhibit various biological behaviors. We present 8 cases of GIST, describing both their radiological manifestation through computerized tomography (CT) and most accepted criteria for benignity and malignancy. We also describe the response of one meta statically diagnosed tumor to tyrosine kinase inhibitor. (Author) 9 refs.

Malignant tumors of gastrointestinal tract

International Nuclear Information System (INIS)

Anon.

1989-01-01

International histological classification and classification according to TNM systems, domestic clinical classification according to stages of carcinoma of stomach, large intestine and rectum are presented. Diagnosis of tumoral processes of the given localizations should be based on complex application of diagnostic methods: clinical, ultrasonic, radiological and others. Surgical method and variants of surgical method with preoperative radiotherapy play a leading role in treatment of mentioned tumors. Combined method of treatment-surgical intervention with postoperation intravenous injection of colloid 198 Au - is applied for preventing propagation of stomach cancer metastases. Advisability of combining operations with radiological and antitumoral medicamentous therapy is shown. Reliable results of treatment of malignant tumors of gastrointestinal tract are presented

Gastrointestinal bleeding secondary to ulcer in duodenal diverticulosis

International Nuclear Information System (INIS)

Ramon Banos Madrid; Fernando Alberca de las Parras; Angel Vargas Acosta and others

2006-01-01

The reasons more frequent of high gastrointestinal bleeding are the peptic gastric and duodenal, followed by acute erosions and the varicose veins in oesophagus and stomach. The diverticulosis of the small bowel is a very rare reason of gastrointestinal bleeding, must considerate in patients with bleeding without evident reason in oesophagus and stomach, the habitual is to diagnose this entity of accidental form in the course of endoscopic procedures, radiological or surgical. The complications associated with the diverticulosis duodenal are rare; it justifies supporting a not surgical attitude at first

Gastrointestinal bleeding secondary to ulcer in duodenal diverticulosis

International Nuclear Information System (INIS)

Banos Madrid, Ramon; Alberca de las Parras, Fernando; Vargas Acosta, Angel and others

2006-01-01

The reasons more frequent of high gastrointestinal bleeding are the peptic gastric and duodenal, followed by acute erosion and the varicose veins in oesophagus and stomachs. The diverticulosis of the small bowel is a very rare reason of gastrointestinal bleeding, must considerate in patients with bleeding without evident reason in oesophagus and stomach the habitual is to diagnose this entity of occidental form in the course of endoscopic procedures, radiological of surgical. The complications associated with the diverticulosis duodenal are rare; it justifies supporting a not surgical attitude at first

Differential diagnosis in the pediatric radiology

International Nuclear Information System (INIS)

Rijn, Rick R. van; Blickmann, Johan G.

2012-01-01

The book on differential diagnosis in the pediatric radiology covers the following issues: (1) Thorax, mediastinum, heart ad large blood vessels. (2) Abdomen and gastrointestinal tract. (3) Urogenital tract. (4) Skull, intracranial space and spinal cord. (5) Skeleton, bone joints and soft tissue. (6) Normative values.

Magnetic resonance imaging biomarkers of gastrointestinal motor function and fluid distribution

Institute of Scientific and Technical Information of China (English)

Asseel; Khalaf; Caroline; L; Hoad; Robin; C; Spiller; Penny; A; Gowland; Gordon; W; Moran; Luca; Marciani

2015-01-01

Magnetic resonance imaging(MRI) is a well established technique that has revolutionized diagnostic radiology. Until recently, the impact that MRI has had in the assessment of gastrointestinal motor function and bowel fluid distribution in health and in disease has been more limited, despite the novel insights that MRI can provide along the entire gastrointestinal tract. MRI biomarkers include intestinal motility indices, small bowel water content and whole gut transit time. The present review discusses new developments and applications of MRI in the upper gastrointestinal tract, the small bowel and the colon reported in the literature in the last 5 years.

Pediatric radiology

International Nuclear Information System (INIS)

Silverman, F.N.

1982-01-01

A literature review with 186 references of diagnostic pediatric radiology, a speciality restricted to an age group rather than to an organ system or technique of examination, is presented. In the present chapter topics follow the basic organ system divisions with discussions of special techniques within these divisions. The diagnosis of congenital malformations, infectious diseases and neoplasms are a few of the topics discussed for the head and neck region, the vertebrae, the cardiovascular system, the respiratory system, the gastrointestinal tract, the urinary tract, and the skeleton

Detection of Giardia intestinalis infections in Polish soldiers deployed to Afghanistan.

Science.gov (United States)

Korzeniewski, Krzysztof; Konior, Monika; Augustynowicz, Alina; Lass, Anna; Kowalska, Ewa

2016-01-01

Members of the Polish Military Contingent (PMC) have been stationed in Afghanistan since 2002. They typically serve in areas characterised by low standards of sanitation which often leads to the development of food- and waterborne diseases. The aim of the study was to evaluate the prevalence of Giardia intestinalis infections among Polish soldiers deployed to Afghanistan. The research study was conducted as part of a programme for prevention of parasitic diseases of the gastrointestinal tract run by the Polish Armed Forces. The study was carried out in August 2011; it involved 630 asymptomatic Polish soldiers serving in the Forward Operational Base (FOB) Ghazni in eastern Afghanistan. Stool specimens obtained from members of the PMC were first tested in FOB Ghazni (detection of Giardia intestinalis by Rida Quick Giardia immunochromatographic tests and Ridascreen Giardia immunoenzymatic tests - single samples). Next, the same biological material and two other faecal specimens fixed in 10% formalin were transported to the Military Institute of Medicine in Poland, where they were tested for Giardia intestinalis under light microscopy (direct smear, decantation in distilled water). Parasitological tests performed under light microscopy showed that 2.7% (17/630) of the study group were infected with Giardia intestinalis. Some of these results were confirmed by immunochromatographic tests (6/630). In contrast, immunoenzymatic tests (ELISA) demonstrated a significantly higher detection rate reaching 18.1% (114/630). Immunoenzymatic tests confirmed all the positive results given by light microscopy and by immunochromatographic tests. The prevalence rate of Giardia intestinalis infections in Polish soldiers deployed to Afghanistan was found to be high. Microscopic methods exhibit low sensitivity and therefore may result in the underestimation of the true parasite prevalence. Immunoenzymatic tests (ELISA) showing a much higher sensitivity in comparison to light microscopy

Syllabus. 5. Halley radiological refresher course. Chest, musculoskeleton, G. I. and abdomen, urinary tract

International Nuclear Information System (INIS)

Dalla Palma, L.

1996-01-01

This volume brings together the papers which 33 radiologists, chosen among the leading European experts, presented at the Halley Project 1996 Refresher Course. The project started out under the aegis of the European Association of Radiology in 1992 with the aim of fostering the advancement of radiolgy in various countries of Eastern Europe: Bulgaria, the Czech Republic, Slovakia, Hungary, Poland and Romania. It was possible to set up, in 1992, 1993, 1994 and 1995, four faculties of experts in uroradiology, gastrointestinal and abdominal radiology, chest radiology and skeletal radiology. These four faculties then gave a refresher course on the four radiological subspecialities in the six nations mentioned above. This year, the fifth in the activities, the event was celebrated by inviting all the 33 speakers who took part in the four previous refresher courses to participate in a single refresher course which would review the four subspecialities in such a way as to update progress in each branch to 1996. This volume gathers together all the 33 lectures presented at this 5th Halley Refresher Course. They focus on the most up-to-date issues in radiology of the chest, gastrointestinal tract, skeleton and urinary tract. (orig./VHE)

Adverse effects and complications related to the use of barium sulphate contrast media for radiological examinations of the gastrointestinal tract - a literature review

International Nuclear Information System (INIS)

Periard, M.A.

2003-01-01

Barium sulphate is considered a safe and efficacious contrast medium that is routinely used for radiologic examinations of the gastrointestinal tract. Although the examinations rarely result in complications, the technique is moderately invasive and not entirely innocuous. Complications resulting from the procedures, and adverse reactions from the barium itself, have ranged from mild to severe and in rare instances have led to patient death. This paper reviews the clinical application, biological requirements and clinical properties of barium sulphate contrast media used in diagnostic x-ray imaging. It also outlines the risk factors and associated adverse reactions and complications involved with the use of barium sulphate, and presents documented cases where iatrogenic injuries have resulted. (author)

Comparison of radiologic and pathologic findings of gastric MALToma

Energy Technology Data Exchange (ETDEWEB)

Lee, Dong Ho; Lee, Ju Hie; Ko, Young Tae [Kyunghee Univ. Hospital, Seoul (Korea, Republic of)

1997-02-01

To evaluate the radiologic findings of gastric MALToma, and to correlate these with its pathologic findings. We retrospectively reviewed the pathologic slides of gastrectomy and gastroscopic biopsy specimens obtained between 1982 and 1996, and collected nine cases of gastric MALToma. Eight of these had been surgically confirmed, and one had been diagnosed by gastroscopic biopsy. A gastrointestinal series comprised eight cases; five involved sonography and five, CT. The lesions were located at the body in five cases, at the antrum in one, and at the body and antrum in three cases. Pathologic diagnosis was low grade MALToma in four cases, and mixed high and low grade MALToma in five cases. Initial radiologic diagnosis was gastric lymphoma in four cases, early gastric carcinoma in three, and advanced gastric carcinoma in two cases. On retrospective analysis, radiologic diagnosis was changed to lymphoma in both cases initially diagnosed as advanced gastric carcinomas. One case showed marked thickening of the gastric wall, with poor enhancement on CT, and the other case showed a very small and shallow ulcer in comparison to diffuse infiltration of tumor in the upper gastrointestinal series. The final radiologic diagnosis was gastric lymphoma in six cases, and early carcinoma in three. Radiologic findings of gastric MALToma were EGC II c-like lesion in three cases, marked gastric wall thickening in two, multiple discrete lesions in two, hyperugosity of gastric folds with discrete lesions in one, and diffuse infiltrative lesion with small ulcer in one case. The pathologic diagnosis of gastric MALToma was made by the presence of lymphoepithelial lesions, centrocyte-like cells, reactive follicles, plasma cell infiltration, and follicular colonization. There were no significant correlations between radiologic findings and pathologic results such as depth of tumor invasion, low grade MALToma or mixed high and low grade MALToma. There are no specific radiologic characteristics

Cancer morbidity among polishers.

Science.gov (United States)

Järvholm, B; Thiringer, G; Axelson, O

1982-01-01

The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

Radiological Findings in Two Patients with Cow's Milk Allergic Enterocolitis

Directory of Open Access Journals (Sweden)

Kouji Masumoto

2004-07-01

Full Text Available Cow's milk allergic enterocolitis is a common paediatric gastrointestinal disease. However, radiological findings from contrast studies have rarely been reported. We report two Japanese neonate patients with cow's milk allergic enterocolitis with vomiting, bloody stool and unique findings on upper gastrointestinal contrast study. Upper gastrointestinal contrast study showed folds of the small intestine to be thickened, such as in spasm, or ribbonlike cords in both cases. There was also poor passage from the duodenum to the jejunum in one case. In addition, there were spastic findings on lower gastrointestinal contrast study in part of the large colon in one case. Clinicians, including paediatric surgeons, treating neonates with bloody stool and/or vomiting should thus be aware that unique findings on upper and lower gastrointestinal contrast studies may be useful in suspecting cases with cow's milk allergic enterocolitis.

Polishing large NaCl windows on a continuous polisher

International Nuclear Information System (INIS)

Williamson, R.

1979-01-01

The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

Gastrointestinal Stromal Tumor: Diagnosis and Prognosis

International Nuclear Information System (INIS)

Martin, M. T.; Olmedilla, P.; Gonzalez, S.; Oliver, J. M.

2003-01-01

Gastrointestinal stromal tumors (GIST) are mesenquimal tumors derived from cell precursors. They have the capacity for myogenic and neurogenic differentiation and are characterized by expression of KIT protein /tyrosine kinase growth factor). Clinically, they exhibit various biological behaviors. We present 8 cases of GIST, describing both their radiological manifestation through computerized tomography (CT) and most accepted criteria for benignity and malignancy. We also describe the response of one meta statically diagnosed tumor to tyrosine kinase inhibitor. (Author) 9 refs

Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

Science.gov (United States)

Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

2014-01-01

Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

Functional Median Polish

KAUST Repository

Sun, Ying

2012-08-03

This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

Relevant radiological anatomy of the pig as a training model in interventional radiology

International Nuclear Information System (INIS)

Dondelinger, R.F.; Ghysels, M.P.; Brisbois, D.; Donkers, E.; Snaps, F.R.; Saunders, J.; Deviere, J.

1998-01-01

The use of swine for teaching purposes in medicine and surgery has largely increased in recent years. Detailed knowledge of the porcine anatomy and physiology is a prerequisite for proper use of pigs as a teaching or an experimental model in interventional radiology. A systematic study of the radiological anatomy was undertaken in more than 100 female pigs aged 6-8 weeks. All studies were performed under general anesthesia in a single session. Animals were sacrificed at the end of the study. Selective angiographies were systematically obtained in all anatomical territories. In other animals CT and MRI examinations were performed and were correlated to anatomical sections and acrylic casts of the vascular structures. Endoscopical examinations of the upper gastrointestinal tract, including retrograde opacification of the biliary and pancreatic ducts, were added in selected animals. The main angiographic aspects of the brain, head and neck, thorax, abdomen, and pelvis were recorded. Similarities and differences in comparison with human anatomy are stressed. Potential applications in interventional radiology are indicated. (orig.)

Functional Median Polish

KAUST Repository

Sun, Ying; Genton, Marc G.

2012-01-01

polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

Imaging of systemic lupus erythematosus. Part II: Gastrointestinal, renal, and musculoskeletal manifestations

International Nuclear Information System (INIS)

Goh, Y.P.; Naidoo, P.; Ngian, G.-S.

2013-01-01

Systemic lupus erythematosus (SLE) is a chronic, multisystem autoimmune disease that has a relapsing and remitting course. It has a wide range of presentations with various organ manifestations. In this review, we have compiled the radiological findings of gastrointestinal, renal, and musculoskeletal manifestations of SLE.

'Horses for courses' in the upper gastrointestinal tract: a rational approach to diagnosis

International Nuclear Information System (INIS)

Mendelson, R.M.

1989-01-01

In Australia, the number of barium studies performed in teaching hospitals has fallen markedly while in the community at large a 113% increase occurred in the number of upper gastrointestinal endoscopic procedures performed between 1980 and 1986. Protagonists of primary endoscopy cite studies that report on the superiority of oesophagogastroduodenoscopy in patients with dyspepsia and related symptoms but several studies have shown that upper gastrointestinal barium studies miss very few important lesions. Fibreoptic endoscopy and radiology each have strengths and weaknesses which determine their respective places in the investigation of the different symptom complexes that are referable to the upper gastrointestinal tract. Double-contrast barium-meal examination is the suggested imaging modality for simple dyspepsia, for the oesophagitis-reflux-hiatus hernia complex and for dysphagia; while oesophagogastroduodenoscopy is the method of choice for the investigation of complicated dyspepsia, haematemesis and melaena. In patients who have previously undergone gastric surgery, endoscopy and radiology are complementary procedures - the former more accurate in the diagnosis of recurrent disease like ulceration, and the later useful for the delineation of anatomical changes. The time for the across-the-board replacement of barium studies by primary endoscopy has not yet arrived. 57 refs

Radiology trainer. Torso, internal organs and vessels. 2. ed.; Radiologie-Trainer. Koerperstamm, innere Organe und Gefaesse

Energy Technology Data Exchange (ETDEWEB)

Staebler, Axel [Orthopaedische Klinik Harlaching, Muenchen (Germany). Radiologische Praxis; Erlt-Wagner, Birgit (eds.) [Klinikum der Universitaet Muenchen (Germany). Inst. fuer Klinische Radiologie

2013-11-01

The radiology training textbook is based on case studies of the clinical experience, including radiological imaging and differential diagnostic discussion. The scope of this volume covers the torso, internal organs and vessels. The following issues are discussed: lungs, pleura, mediastinum; heart and vascular system; upper abdomen organs; gastrointestinal tract; urogenital system.

Twentieth congress of the European Society of Pediatric Radiology

International Nuclear Information System (INIS)

Anon.

1983-01-01

91 Abstracts of lectures are presented given at the 20th Congress of the European Society of Pediatric Radiology. The topics of the different sessions were as follows: Urinary tract, musculo-skeletal system, respiratory tract, gastrointestinal tract, skull and neuroradiology, genital tract, new modality imaging and cardiovascular system. (MG)

Gastrointestinal transit after transverse colostomy: study of solid radiopaque markers progression and others clinical and radiological events - analysis of 20 cases; Transito gastrintestinal apos fechamento de transversostomia: estudo atraves da progressao de marcadores solidos radiopacos e de outros eventos clinicos e radiologicos - analise de 20 casos

Energy Technology Data Exchange (ETDEWEB)

Deutsch, Claudio Roberto

1988-07-01

The gastrointestinal transit was studied in 20 patients with loop transverse colostomies and previously normal colons. This analysis was performed through radiological observation of progression of 20 radiopaque pellets and measurements of its transit time in the various segments of the digestive tract. An evaluation of other related clinical and radiological events was carried out sentimentality's. In order to better understand the influence of the surgical procedure, the study was performed under similar dietary and supportive care conditions and standard radiological studies before and after the re-establishment of transit, thus enabling a comparison with the same individual. (author)

Computed tomography of the gastrointestinal tract

International Nuclear Information System (INIS)

Megibow, A.J.; Balthazar, E.J.

1986-01-01

New generation CT scans combined with high-detail barium studies have now allowed radiologists to see and gain a more complete understanding of the wall and surrounding structures of the gastrointestinal tract. The editors state that their intent is to ''present in a comprehensive volume an up-to-date evaluation o the role, significance, indications, and limitations of computed tomography of the gastrointestinal tract.'' There is an initial chapter on CT scanning techniques and the use of oral contrast agents. Chapters follow on Ct of the esophagus, stomach, duodenum, small bowel, and colon. The chapters start with a description of the anatomic structures and then cover in detail common pathologic conditions that affect the organ. Indications for examinations are also included in many chapters. There are final chapters on percutaneous drainage of abscesses and fluid collections and on radiologic-patholoic correlation of some of the more common entities

Health Information in Polish (polski)

Science.gov (United States)

... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

Imaging in hematology. Part 1: Ultrasonography and conventional radiology

International Nuclear Information System (INIS)

Zhechev, Y.

2003-01-01

Applications of conventional ultrasonography techniques (B-mode or real time) in oncohematology are presented. The newer adaptations (in particular colour Doppler) provide incremental advantages that support their inclusion in the imaging techniques available to modern hematology. Conventional radiologic studies include chest and bone X-ray, gastrointestinal contrast examination and bipedal lymphangiography

Polish Cartographical Review

Directory of Open Access Journals (Sweden)

Nedjeljko Frančula

2017-07-01

Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

Polish-German bilingualism at school. A Polish perspective

Directory of Open Access Journals (Sweden)

Pulaczewska, Hanna

2014-03-01

Full Text Available This article presents the institutional frames for the acquisition of Polish literacy skills in Germany and the maintenance of Polish-German bilingualism after the repatriation of bilingual children to Poland. These processes are examined in the context of recent developments in the European domestic job market. While the European Union has placed proficiency in several languages among its educational objectives, and foreign languages have been made obligatory school subjects in all member countries, the potential advantages of internal European migrations for producing high-proficiency bilinguals are being ignored. Bilingualism resulting from migration and biculturalism enjoys little social prestige in the host countries. In Germany, there is significant regional variation in how school authorities react to challenges posed by the presence of minority languages. In many cases, the linguistic potential of many second-generation migrants and re-emigrants gets largely wasted because of lacking interest and incentives from German and Polish institutions alike.

Radiological diagnosis of Meckel's diverticulum

International Nuclear Information System (INIS)

Florio, F.; Palladino, M.; Stella, P.

1988-01-01

Seven patients with clinically suspected Meckel's diverticulum were examined. The symptoms of Meckel's diverticulum are variable, ranging from mild recurrent or severe acute gastrointestinal bleeding to intestinal obstruction and acute peritonitis. The authors evaluate the diagnostic results and suggest guidelines to choose the most appropriate radiological procedures, according to the clinical pattern: barium meal, enteroclysis and scintigraphy ( 99m TC) in patients with mild bleeding; mesenteric angiography in case of severe bleeding. The possibility of false negatives and positives is then discussed

Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

Directory of Open Access Journals (Sweden)

Piotr Žmigrodzki

2014-12-01

Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

Polish Higher Education: Intersectoral Distinctiveness

Science.gov (United States)

Musial, Joanna

2014-01-01

This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

Radiology illustrated. Pediatric radiology

Energy Technology Data Exchange (ETDEWEB)

Kim, In-One (ed.) [Seoul National Univ. College of Medicine (Korea, Republic of). Dept. of Radiology

2014-11-01

Depicts characteristic imaging findings of common and uncommon diseases in the pediatric age group. Will serve as an ideal diagnostic reference in daily practice. Offers an excellent teaching aid, with numerous high-quality illustrations. This case-based atlas presents images depicting the findings typically observed when imaging a variety of common and uncommon diseases in the pediatric age group. The cases are organized according to anatomic region, covering disorders of the brain, spinal cord, head and neck, chest, cardiovascular system, gastrointestinal system, genitourinary system, and musculoskeletal system. Cases are presented in a form resembling teaching files, and the images are accompanied by concise informative text. The goal is to provide a diagnostic reference suitable for use in daily routine by both practicing radiologists and radiology residents or fellows. The atlas will also serve as a teaching aide and a study resource, and will offer pediatricians and surgeons guidance on the clinical applications of pediatric imaging.

Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

Science.gov (United States)

Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

2015-01-01

This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

Polish visit

CERN Document Server

2003-01-01

On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

Czech Academy of Sciences Publication Activity Database

Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

2016-01-01

Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

Polish media and public opinion on NPP Mochovce commissioning

International Nuclear Information System (INIS)

Latek, Stanislaw

1999-01-01

The so called 'Mochovce Problem' was one of the major topics in Polish media in the period from May to July 1998. The nuclear power plant commissioning caused an unexpectedly strong reaction, especially in the newspapers, slightly less so in electronic media. Faced with clearly hostile media reaction to Mochovce NPP, the National Atomic Energy Agency representatives, together with atomic and nuclear experts, undertook to change these attitudes. In numerous interviews, letters to the editors and talks with journalists, they attempted to correct the mistakes, explain the true safety situation in the nuclear power plant, by whom it was constructed, who supervised and tested the systems and so on. The completion of Mochovce NPP construction improved significantly the electricity balance in Slovakia, thus decreasing the pressure for continuing the operation of older Bohunice V1 units beyond their design lifetime. For this reason, as well as in view of striving for improvement in environmental factors beyond Polish southern border, especially after Kyoto/97 decisions on greenhouse gases emissions, the public opinion in Poland should support the Mochovce NPP construction. In 1996 Poland has signed with Slovakia a bilateral inter-governmental agreement on the prompt notification on nuclear accidents and on the cooperation in the nuclear safety and radiological protection matters. On the basis of this agreement the experts from Polish National Atomic Energy Agency are in perpetual contact with Slovakian Nuclear Regulatory Body and in each and every moment can obtain full and comprehensive information on the plant parameters iportant for nuclear safety. The experts explanations, together with the NAEA top management visit to the plant itself, brought some results. The media became less aggressive, and Polish public and authorities - contrary to the Austrians - do not protest loudly against the commissioning of this newest European NPP. Now, in December 1998, the tune of

Radiological findings in Wolfram syndrome

International Nuclear Information System (INIS)

Hadidy, Azmy M.; Jarrah, Nadim S.; Al-Till, Maha I.; Ajlouni, Kamal M.; El-Shanti, Haten E.

2004-01-01

To determine the precise radiologic findings in Wolfram syndrome (WFS) patients using objective techniques in order to better define the reference population for the clinicl evaluation. 16 patients (6 males, 10 female) with WFS found in 4 families were included in this study.14 patients with WFS-2 came from 3 families while 2 patients with EFS-1 came from one family. All patients were studied at Jordan University Hospital, Amman,Jordan from January 2001 to January 2003 by definite radiologic techniques as part of a thorough clinical comprehesive assesment. These incclude intravenous urography, abdominal and pelvic ultrasonography, barium meal, upper gastrointestinal endoscopy and magnetic resonance imaging with and without contrasts to the brain and the pituitary glands.5 of the female ptients had a small uterus. Spina bifida was found in 7, hydronephrosis in 9 and hydroureter in 5 patiets. Peptic ulcer was detected in 10 out of 14 available patients and helicobacter pylori in 7 out of 16 patients. Atrophy was detected was detected in all brains, 9 brain stems, 12 cerebellums and 14 optic tracts of all patients. The size of pituitary glands was variable. The particular radiological assesment of the patients with WFS proved that, urinary tract dialtation was detected in WFS-1and WFS-2 patients though all WFS-2 patients.No significant radiologic difference was between patients with WFS-1 and WFS-2. (author)

Embolization for gastrointestinal hemorrhages

International Nuclear Information System (INIS)

Kraemer, S.C.; Goerich, J.; Rilinger, N.; Aschoff, A.J.; Vogel, J.; Brambs, H.J.; Siech, M.

2000-01-01

Retrospective evaluation of interventional embolization therapy in the treatment of gastrointestinal hemorrhage over a long-term observation period from 1989 to 1997. Included in the study were 35 patients (age range 18-89 years) with gastrointestinal bleeding (GI) referred for radiological intervention either primarily or following unsuccessful endoscopy or surgery. Sources of GI bleeding included gastric and duodenal ulcers (n = 7), diverticula (n = 3), erosion of the intestinal wall secondary to malignancy (n = 6), vascular malformations (n = 4), and hemorrhoids (n = 2), as well as from postoperative (n = 6), posttraumatic (n = 2), postinflammatory (n = 4) or unknown (n = 1) causes. Ethibloc (12 cases) or metal coils (14 cases) were predominantly used as embolisates. In addition, combinations of tissue adhesive and gelfoam particles and of coils and Ethibloc were used (six cases). Finally, polyvinyl alcohol particles, a coated stent, and an arterial wire dissection were utilized in one case each. Bleeding was stopped completely in 29 of 35 cases (83 %). In one case (3 %) the source of bleeding was recognized but the corresponding vessel could not be catheterized. In five other cases (14 %) there was partial success with reduced, though still persistent, bleeding. The rate of complications was 14 %, including four instances of intestinal ischemia with fatal outcome in the first years, and, later, one partial infarction of the spleen without serious consequences. Gastrointestinal hemorrhage can be controlled in a high percentage of patients, including the seriously ill and those who had previously undergone surgery, with the use of minimally invasive interventional techniques. The availability of minicoils instead of fluid embolization agents has reduced the risk of serious complications. (orig.)

Embolization for gastrointestinal hemorrhages

Energy Technology Data Exchange (ETDEWEB)

Kraemer, S.C.; Goerich, J.; Rilinger, N.; Aschoff, A.J.; Vogel, J.; Brambs, H.J. [Dept. of Diagnostic Radiology, University of Ulm (Germany); Siech, M. [Dept. of Abdominal Surgery, University of Ulm (Germany)

2000-05-01

Retrospective evaluation of interventional embolization therapy in the treatment of gastrointestinal hemorrhage over a long-term observation period from 1989 to 1997. Included in the study were 35 patients (age range 18-89 years) with gastrointestinal bleeding (GI) referred for radiological intervention either primarily or following unsuccessful endoscopy or surgery. Sources of GI bleeding included gastric and duodenal ulcers (n = 7), diverticula (n = 3), erosion of the intestinal wall secondary to malignancy (n = 6), vascular malformations (n = 4), and hemorrhoids (n = 2), as well as from postoperative (n = 6), posttraumatic (n = 2), postinflammatory (n = 4) or unknown (n = 1) causes. Ethibloc (12 cases) or metal coils (14 cases) were predominantly used as embolisates. In addition, combinations of tissue adhesive and gelfoam particles and of coils and Ethibloc were used (six cases). Finally, polyvinyl alcohol particles, a coated stent, and an arterial wire dissection were utilized in one case each. Bleeding was stopped completely in 29 of 35 cases (83 %). In one case (3 %) the source of bleeding was recognized but the corresponding vessel could not be catheterized. In five other cases (14 %) there was partial success with reduced, though still persistent, bleeding. The rate of complications was 14 %, including four instances of intestinal ischemia with fatal outcome in the first years, and, later, one partial infarction of the spleen without serious consequences. Gastrointestinal hemorrhage can be controlled in a high percentage of patients, including the seriously ill and those who had previously undergone surgery, with the use of minimally invasive interventional techniques. The availability of minicoils instead of fluid embolization agents has reduced the risk of serious complications. (orig.)

Magnetic resonance imaging for the clinical management of rectal cancer patients: recommendations from the 2012 European Society of Gastrointestinal and Abdominal Radiology (ESGAR) consensus meeting

Energy Technology Data Exchange (ETDEWEB)

Beets-Tan, Regina G.H. [Maastricht University Medical Centre+, Maastricht (Netherlands); Maastricht University Medical Centre+, Department of Radiology, P.O. Box 5800, AZ, Maastricht (Netherlands); Lambregts, Doenja M.J.; Maas, Monique [Maastricht University Medical Centre+, Maastricht (Netherlands); Bipat, Shandra; Stoker, Jaap [Academic Medical Centre, Amsterdam (Netherlands); Barbaro, Brunella [Catholic University School of Medicine, Rome (Italy); Caseiro-Alves, Filipe; Curvo-Semedo, Luis [Coimbra University Hospitals, Coimbra (Portugal); Fenlon, Helen M. [Mater Misericordiae University Hospital, Dublin (Ireland); Gollub, Marc J. [Memorial Sloan-Kettering Cancer Center, New York (United States); Gourtsoyianni, Sofia [University Hospital of Heraklion, Crete (Greece); Guy' s and St. Thomas' NHS FT, London (United Kingdom); Halligan, Steve; Taylor, Stuart A. [University College London, Centre for Medical Imaging, London (United Kingdom); Hoeffel, Christine [Reims University Hospital, Reims (France); Kim, Seung Ho [Inje University Haeundae Paik Hospital, Busan (Korea, Republic of); Laghi, Andrea [Sapienza - University of Rome, Rome (Italy); Maier, Andrea [Medical University of Vienna, Vienna (Austria); Rafaelsen, Soeren R. [Vejle Hospital, Vejle (Denmark); Torkzad, Michael R. [Uppsala University, Uppsala (Sweden); Blomqvist, Lennart [Karolinska University Hospital and Karolinska Institutet, Stockholm (Sweden)

2013-09-15

To develop guidelines describing a standardised approach regarding the acquisition, interpretation and reporting of magnetic resonance imaging (MRI) for clinical staging and restaging of rectal cancer. A consensus meeting of 14 abdominal imaging experts from the European Society of Gastrointestinal and Abdominal Radiology (ESGAR) was conducted following the RAND-UCLA Appropriateness Method. Two independent (non-voting) chairs facilitated the meeting. Two hundred and thirty-six items were scored by participants for appropriateness and classified subsequently as appropriate or inappropriate (defined by {>=} 80 % consensus) or uncertain (defined by < 80 % consensus). Items not reaching 80 % consensus were noted. Consensus was reached for 88 % of items: recommendations regarding hardware, patient preparation, imaging sequences, angulation, criteria for MRI assessment and MRI reporting were constructed from these. These expert consensus recommendations can be used as clinical guidelines for primary staging and restaging of rectal cancer using MRI. (orig.)

Indoor "2"2"2Rn concentration in the exhibition and storage rooms of Polish geological museums

International Nuclear Information System (INIS)

Długosz-Lisiecka, Magdalena; Krystek, Marcin; Raczyński, Paweł; Głuszek, Ewa; Kietlińska-Michalik, Barbara; Niechwedowicz, Mariusz

2017-01-01

The radon exhaled from radioactive mineral collections exhibited in five Polish geological museums may influence its total indoor concentration. Radon concentrations measured in the exhibition halls do not pose a risk for visitors or museum staff. However, air exceeding the action limit for workers (equal to 300 Bq/m"3) was noted in the storage rooms of two museums. Significant"2"2"2Rn activity concentrations equal to more than ~300 kBq/m"3were measured inside lead containers where radioactive minerals were stored. - Highlights: • In this "2"2"2Rn radionuclide measurements in 5 Polish geological museums have been done. • The review of "2"2"2Rn activity in the air in areas containing radioactive geological collections is not a routine protocol, and is not included in the national radon monitoring program. • Therefore the radiological exposure for museum staff resulting from inhalation of gaseous radon and its products has been including.

Wrong decisions in radiology. Analysis of causes and strategies for error prevention

International Nuclear Information System (INIS)

Lackner, Klaus-Juergen; Krug, Kathrin Barbara

2009-01-01

The book covers observations on errors concerning radiological decisions within a ten-year period. The compiled information is supposed to prevent similar errors in the future. The case studies cover the following issues: cranium, thorax, mamma, abdomen (liver, pancreas, colon), (gastrointestinal tract, urogenital tract), spinal cord, skeleton and blood vessels.

Radiological imaging of the upper gastrointestinal tract. Pt. 1. The esophagus

International Nuclear Information System (INIS)

Hansmann, J.; Grenacher, L.

2006-01-01

In the diagnosis of diseases of the esophagus, conventional x-ray evaluation still plays a more important role than endoscopy in the visualization of stenoses. CT plays a major role in the staging of malignancies of the esophagus, while MRI plays does not play a major part in the diagnostic evaluation of the upper GI-tract but is equal to CT for the staging and evaluation of the extent of local infiltration. The main indication for the radiological examination of the esophagus by barium studies is dysphagia. The use of barium allows a functional examination of esophageal motility. Swallow motility disorders can be diagnosed by videofluorography using high frame rate imaging. Zenker's diverticulum and other pulsion diverticula should also be investigated by functional esophageal imaging. Candida esophagitis can be identified by its characteristic ulcerations using barium swallow. The extension of gastroesophageal hernias are more accurately evaluated with barium studies than with endoscopy. The diagnosis of gastroesophageal reflux disease should be made by barium studies, but discrete inflammation as well as epithelial dysplasia are best investigated by classic endoscopy and modern endoscopic techniques. In cases of esophageal carcinoma, radiology adds to the findings of endoscopy and endosonography. (orig.) [de

Transcatheter arterial embolization for acute nonvariceal upper gastrointestinal bleeding: Indications, techniques and outcomes.

Science.gov (United States)

Loffroy, R; Favelier, S; Pottecher, P; Estivalet, L; Genson, P Y; Gehin, S; Cercueil, J P; Krausé, D

2015-01-01

Over the past three decades, transcatheter arterial embolization has become the first-line therapy for the management of acute nonvariceal upper gastrointestinal bleeding that is refractory to endoscopic hemostasis. Advances in catheter-based techniques and newer embolic agents, as well as recognition of the effectiveness of minimally invasive treatment options, have expanded the role of interventional radiology in the treatment of bleeding for a variety of indications. Transcatheter arterial embolization is a fast, safe, and effective minimally invasive alternative to surgery, when endoscopic treatment fails to control acute bleeding from the upper gastrointestinal tract. This article describes the role of arterial embolization in the management of acute nonvariceal upper gastrointestinal bleeding and summarizes the literature evidence on the outcomes of endovascular therapy in such a setting. Copyright © 2015 Éditions françaises de radiologie. Published by Elsevier Masson SAS. All rights reserved.

A review of scientific topics and literature in abdominal radiology in Germany. Pt. 2. Abdominal parenchymal organs

Energy Technology Data Exchange (ETDEWEB)

Grenacher, L. [Diagnostik Muenchen-Diagnostic Imaging Centre (Germany); Juchems, M.S. [Konstanz Hospital (Germany). Diagnostic and Interventional Radiology; Holzapfel, K. [Technische Univ. Muenchen (Germany). Dept. of Radiology; Kinner, S.; Lauenstein, T.C. [University Hospital Essen (Germany). Dept. of Radiology; Wessling, J. [Clemens Hospital Muenchen (Germany). Dept. of Radiology; Schreyer, A.G. [University Hospital Regenburg (Germany). Dept. of Radiology

2016-03-15

The working group for abdominal and gastrointestinal diagnosis is a group of the German Radiological Society (DRG) focusing clinically and scientifically on the diagnosis and treatment of the gastrointestinal tract as well as the parenchymal abdominal organs. In this article we give an up-to-date literature review of scientific radiological topics especially covered by German radiologists. The working group experts cover the most recent relevant studies concerning liver-specific contrast media with an emphasis on a new classification system for liver adenomas. Additionally studies regarding selective internal radiotherapy (SIRT) are reviewed. For the pancreas the most important tumors are described followed by an introduction to the most recently introduced functional imaging techniques. The manuscript concludes with some remarks on recent studies and concerning chronic pancreatitis as well as autoimmune pancreatitis.

The tourism attractiveness of Polish libraries

OpenAIRE

Miedzińska, Magdalena; Tanaś, Sławoj

2009-01-01

The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

Detection of paint polishing defects

Science.gov (United States)

Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

2018-06-01

Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Polish Industry and Art at CERN

CERN Multimedia

2000-01-01

On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

Radiological features of Meckel's diverticulum and its complications

International Nuclear Information System (INIS)

Thurley, P.D.; Halliday, K.E.; Somers, J.M.; Al-Daraji, W.I.; Ilyas, M.; Broderick, N.J.

2009-01-01

Meckel's diverticulum is the most common congenital abnormality of the small bowel. The majority of patients with this anomaly will remain asymptomatic; however, several complications may occur, including obstruction, intussusception, perforation, diverticulitis, and gastrointestinal haemorrhage. These complications may produce a variety of different clinical features and radiological appearances. The purpose of this article is to review the potential imaging manifestations of Meckel's diverticulum and its complications and discuss the advantages and disadvantages of the imaging techniques available

Radiological features of Meckel's diverticulum and its complications

Energy Technology Data Exchange (ETDEWEB)

Thurley, P.D. [Departments of Radiology Queens Medical Centre, Nottingham University Hospitals, Nottingham (United Kingdom)], E-mail: pthurley@doctors.org.uk; Halliday, K E; Somers, J M [Departments of Radiology Queens Medical Centre, Nottingham University Hospitals, Nottingham (United Kingdom); Al-Daraji, W I; Ilyas, M [Histopathology, Queens Medical Centre, Nottingham University Hospitals, Nottingham (United Kingdom); Broderick, N J [Departments of Radiology Queens Medical Centre, Nottingham University Hospitals, Nottingham (United Kingdom)

2009-02-15

Meckel's diverticulum is the most common congenital abnormality of the small bowel. The majority of patients with this anomaly will remain asymptomatic; however, several complications may occur, including obstruction, intussusception, perforation, diverticulitis, and gastrointestinal haemorrhage. These complications may produce a variety of different clinical features and radiological appearances. The purpose of this article is to review the potential imaging manifestations of Meckel's diverticulum and its complications and discuss the advantages and disadvantages of the imaging techniques available.

Polish polar research (outline

Directory of Open Access Journals (Sweden)

Krzysztof Ludwik Birkenmajer

2017-12-01

Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

Conformal polishing approach: Tool footprint analysis

Directory of Open Access Journals (Sweden)

José A Dieste

2016-02-01

Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

Zerodur polishing process for high surface quality and high efficiency

International Nuclear Information System (INIS)

Tesar, A.; Fuchs, B.

1992-08-01

Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

Lysenko affair and Polish botany.

Science.gov (United States)

Köhler, Piotr

2011-01-01

This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

Radiology of renal failure

International Nuclear Information System (INIS)

Griffiths, H.J.

1990-01-01

This book covers most aspects of imaging studies in patients with renal failure. The initial chapter provides basic information on contrast agents, intravenous urography, and imaging findings in the urinary tract disorders responsible for renal failure and in patients who have undergone transplantation. It illustrates common gastro-intestinal abnormalities seen on barium studies in patients with renal failure. It illustrates the cardiopulmonary complications of renal failure and offers advice for radiologic differentiation. It details different aspects of skeletal changes in renal failure, including a basic description of the pathophysiology of the changes; many excellent illustrations of classic bone changes, arthritis, avascular necrosis, and soft-tissue calcifications; and details of bone mineral analysis

Morbidity Profile of Child Labor at Gem Polishing Units of Jaipur, India

Directory of Open Access Journals (Sweden)

RR Tiwari

2014-07-01

Full Text Available Background: There are millions of working children worldwide. Several causes are suggested for this social evil of which poverty plays a significant role in whether a child will work. Objective: To determine the morbidity profile in the working children of gem polishing units of Jaipur, India and assess some of its associated socio-economic factors. Methods: The present cross-sectional study included 586 gem polishing working children. Using interview, the demographic characteristics, occupational and clinical history of participants were recorded. The reason for taking up the job, income from the job and their desire to attend the school were also asked to assess the social causes of child labor in this region. Results: The mean±SD age of the working children was 11.3±5.3 years. In most of the instances, parents compelled the child to take up the job. Supposed to increase the family income substantially, the child labor activity failed to do so. On the other hand, the children suffered from several occupational health problems like eyestrain, headache, gastrointestinal complaints (eg, abdominal pain, nausea, vomiting, and diarrhea, musculoskeletal symptoms (eg, back pain, pain in limbs, neck pain, and joint pains and skin diseases (eg, scabies, dermatitis. Conclusion: It seems that the social factors forcing the children to work in the studied region, result in deterioration of their health and affect their growth.

The Development of Radiology among Slovenes

Directory of Open Access Journals (Sweden)

Zvonka Zupanič Slavec

2016-10-01

Full Text Available Few discoveries in the history of science brought such significant progress as did the discovery of X-rays by the German physicist Wilhelm Conrad Röntgen in 1895. The finding did not only bring a revolution to the field of medicine but also to many other technical branches. With technological progress in the 20th century, medical roentgenology swiftly developed. The first significant step forward was the introduction of contrast media followed by others including computerised image data management and digital techniques. Medical diagnostics embraced other imaging methods based on other types of energy such as ultrasound and magnetic resonance imaging. The beginnings of roentgenology in the Slovene Lands go back to the year 1900. Bone fractures were the first to be imaged, followed by thoracic imaging and contrast imaging of the gastrointestinal tract. The use of roentgenology spread significantly after World War I, with the implementation in the following years of X-ray machines in all Slovenian hospitals, some spas and sanatoria. Gradually the need for an independent scientific institution emerged, which led to the establishment of the Roentgenological Institute for Slovenia and Istria in Ljubljana in 1923. At the same time radiology was developing also by other Slovenian hospitals.In the 1950s, Slovenian roentgenology increasingly stayed in touch with contemporary international development, updated its equipment and introduced new methods. The modern concept of centralised radiological management, comparable with that of modern European institutions, was realised in Ljubljana in 1973 after the relocation of the Radiological Institute to the new facilities at the Ljubljana University Medical Centre. The first computer tomography machine was installed in 1980, the first ultrasound machine was acquired in 1981, the first digital subtraction angiography (DSA machine was introduced in 1986 and the first magnetic resonance machine was installed in

Chemical polishing of partially oxidized T-111 alloy

International Nuclear Information System (INIS)

Teaney, P.E.

1974-01-01

The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

Gastrointestinal involvement secondary to non-Hodgkins lymphoma in HIV+patients

International Nuclear Information System (INIS)

Bueno, P.; Hernandez. L.; Ruiz, P.; Fernandez, C.; Porto, C.

1996-01-01

We present the clinical and radiological findings in 12 HIV-positive patients with gastrointestinal involvement secondary to non-Hodgkin's lymphoma, focusing on the value of the different diagnostic techniques employed (barium studies, ultrasonography and CT) and the differential diagnosis in view of our findings in these patients. We have reviewed the case histories of 58 HIV-positive patients diagnosed as having non-Hodgkin's lymphoma focusing on the results of barium studies, ultrasonography and CT scanning. According to barium studies, ultrasonography and CT, 12 patients (21%) presented gastrointestinal involvement, located in stomach (n=3D5), duodenum (n=3D2), small bowel (n=3D4), mesentery (n=3D1) and perianal region ( n=3D1). Enlarged abdominal lymph nodes were detected in 10 patients (83%). Six patients (50%) presented extraintestinal lymphomatous involvement and four (30%) had extraabdominal involment. Barium studies and CT were useful in the detection of the lesions of all the patients in whom these techniques were performed. CT also allowed the assessment of extraintestinal involvement. Ultrasonography showed poor sensitivity in the study of gastrointestinal involvement, but was effective in the detection of adenophathy. (Author) 27 refs

Graphite Composite Panel Polishing Fixture

Science.gov (United States)

Hagopian, John; Strojny, Carl; Budinoff, Jason

2011-01-01

The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

63rd German radiological congress

International Nuclear Information System (INIS)

1982-01-01

The book of abstracts contains abstracts of 171 papers read at the German Radiological Congress in Berlin as well as abstracts of two papers not read for lack of time. Further, there are 31 brief descriptions of the scientific exhibition. Subjects: Diagnosis of gall bladder diseases and inflammatory diseases of the large intestine; hyperthermia and irradiation in tumour therapy; nuclear methods in the diagnosis of growing and displacing processes, skeletal diseases, thromboses, embolisms, gastrointestinal and liver affections; new techniques and methods, diagnostics of the spinal tract; radiooncology; carcinoma of the ovaries; diagnostics and therapy of tumours of the lungs; computerized tomography; angiography; ultrasonic diagnosis. (MG) [de

APS 3D: a new benchmark in aspherical polishing

Science.gov (United States)

Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

2017-10-01

The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

Polish Americans. Second, Revised Edition.

Science.gov (United States)

Lopata, Helen Znaniecka

This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

Directory of Open Access Journals (Sweden)

Danuta Roszko

2015-06-01

Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

Specific Radiological Findings of Traumatic Gastrointestinal Tract Injuries in Patients With Blunt Chest and Abdominal Trauma.

Science.gov (United States)

Kokabi, Nima; Harmouche, Elie; Xing, Minzhi; Shuaib, Waqas; Mittal, Pardeep K; Wilson, Kenneth; Johnson, Jamlik-Omari; Nicolaou, Savvas; Khosa, Faisal

2015-05-01

Gastrointestinal hollow viscus injury after blunt chest and abdominal trauma is uncommon and complicates 0.6%-1.2% of all cases of trauma. Early recognition of such injuries significantly decreases morbidity and mortality. Since physical examination is not accurate in detecting such injuries, contrast-enhanced computed tomography has been the mainstay for diagnosis in many emergency departments. This pictorial essay aims to review the incidence, mechanisms, and signs of gastrointestinal hollow viscus injuries in the setting of blunt chest and abdominal trauma. Copyright © 2015 Canadian Association of Radiologists. Published by Elsevier Inc. All rights reserved.

Gut transit is associated with gastrointestinal symptoms and gut hormone profile in patients with cirrhosis

DEFF Research Database (Denmark)

Kalaitzakis, Evangelos; Sadik, Riadh; Holst, Jens Juul

2008-01-01

BACKGROUND & AIMS: Liver cirrhosis is associated with increased prevalence of gastrointestinal symptoms, insulin resistance, and altered gut transit. We aimed to assess the prevalence of gut transit abnormalities in patients with cirrhosis, compared with healthy controls, and to evaluate the rela......BACKGROUND & AIMS: Liver cirrhosis is associated with increased prevalence of gastrointestinal symptoms, insulin resistance, and altered gut transit. We aimed to assess the prevalence of gut transit abnormalities in patients with cirrhosis, compared with healthy controls, and to evaluate...... the relation of gut transit with gastrointestinal symptoms and postprandial glucose and hormone profiles. METHODS: Half gastric emptying, small bowel residence, and colonic filling times were measured with a validated radiologic procedure in 42 consecutive patients with cirrhosis. In a subgroup of 25 patients......, gastrointestinal symptoms were evaluated by using a validated questionnaire and a caloric satiation test. Postprandial glucose, insulin, leptin, ghrelin, glucagon-like peptide 1, and PYY responses were also studied. Eighty-three healthy subjects served as controls for the transit studies and 10 for the hormone...

Assessing operability of a novel polisher arrangement using MMS

International Nuclear Information System (INIS)

Shor, S.W.W.

1987-01-01

A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

Laser polishing of additive manufactured Ti alloys

Science.gov (United States)

Ma, C. P.; Guan, Y. C.; Zhou, W.

2017-06-01

Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

Scintigraphic determination of gastrointestinal transit times. A comparison with breath hydrogen and radiologic methods

DEFF Research Database (Denmark)

Madsen, J L; Larsen, N E; Hilsted, J

1991-01-01

A scintigraphic method for determination of gastrointestinal transit times was compared with the breath hydrogen test and a multiple-bolus, single-radiograph technique. A close temporal association was found between the caecal appearance of radioactivity and the onset of breath hydrogen excretion...... the breath hydrogen concentration profiles....

Severe Gastrointestinal Haemorrhage: Summary of a National Quality of Care Study with Focus on Radiological Services

Energy Technology Data Exchange (ETDEWEB)

McPherson, Simon J., E-mail: simon.mcpherson@nhs.net, E-mail: smcpherson@ncepod.org.uk [Leeds Teaching Hospitals Trust, Department of Radiology (United Kingdom); Sinclair, Martin T.; Smith, Neil C. E. [NCEPOD (National Confidential Enquiry into Patient Outcome and Death) (United Kingdom)

2017-02-15

Purpose of StudyTo identify the remediable factors in the quality of care provided to patients with severe gastrointestinal (GI) bleeding.MethodAll hospital admissions in the first four months of 2013 with ICD10 coding for GI bleeding who received a transfusion of 4 units or more of blood. Up to five cases/hospital randomly selected for structured case note peer review. National availability of GI bleeding services data derived from organisational questionnaire completed by all hospitals.Results4563/29,796 (15.3%) of GI bleeds received 4 or more units of blood with a mortality rate of 20.2% compared to 7.3% without blood transfusion. 30.8% of GI bleeds received a blood transfusion. 32% (60/185) of hospitals admitting acute GI bleeds lacked 24/7 endoscopy. 26% (48/185) had on-site embolisation 24/7 with a further 34% (64/185) accessing embolisation by transfer within a validated formal network. Blood product use was inappropriate in 20% (84/426). Improved management, principally earlier senior gastroenterologist review and/or endoscopy, would have reduced blood product use in 25% (113/457). 14.5% (90/618) had a CT scan which identified the site of bleeding in 32% (29/90). 7.8% (36/459) underwent an Interventional Radiology (IR) procedure but a further 6.3% (21/33) should have had IR. 6% (36/586) underwent surgery with 21/36 for uncontrolled bleeding. In 20/35 IR was not considered despite the majority being suitable for IR. Overall 44% (210/476) received an acceptable standard of care according to peer review.Conclusions26 recommendations were made to improve the quality of care in GI bleeding, with six principle recommendations.

Severe Gastrointestinal Haemorrhage: Summary of a National Quality of Care Study with Focus on Radiological Services

International Nuclear Information System (INIS)

McPherson, Simon J.; Sinclair, Martin T.; Smith, Neil C. E.

2017-01-01

Purpose of StudyTo identify the remediable factors in the quality of care provided to patients with severe gastrointestinal (GI) bleeding.MethodAll hospital admissions in the first four months of 2013 with ICD10 coding for GI bleeding who received a transfusion of 4 units or more of blood. Up to five cases/hospital randomly selected for structured case note peer review. National availability of GI bleeding services data derived from organisational questionnaire completed by all hospitals.Results4563/29,796 (15.3%) of GI bleeds received 4 or more units of blood with a mortality rate of 20.2% compared to 7.3% without blood transfusion. 30.8% of GI bleeds received a blood transfusion. 32% (60/185) of hospitals admitting acute GI bleeds lacked 24/7 endoscopy. 26% (48/185) had on-site embolisation 24/7 with a further 34% (64/185) accessing embolisation by transfer within a validated formal network. Blood product use was inappropriate in 20% (84/426). Improved management, principally earlier senior gastroenterologist review and/or endoscopy, would have reduced blood product use in 25% (113/457). 14.5% (90/618) had a CT scan which identified the site of bleeding in 32% (29/90). 7.8% (36/459) underwent an Interventional Radiology (IR) procedure but a further 6.3% (21/33) should have had IR. 6% (36/586) underwent surgery with 21/36 for uncontrolled bleeding. In 20/35 IR was not considered despite the majority being suitable for IR. Overall 44% (210/476) received an acceptable standard of care according to peer review.Conclusions26 recommendations were made to improve the quality of care in GI bleeding, with six principle recommendations.

Radiographic findings of gastrointestinal anisakiasis: clinical and pathologic correlation

International Nuclear Information System (INIS)

Chung, Tae Woong; Kang, Heoung Keun; Jeong, Yong Yeon; And Others

2000-01-01

To evaluate the radiographic findings of gastrointestinal anisakiasis with clinical and pathologic correlation. In ten patients, findings were retrospectively analysed. There were two cases of the gastric variety of gastrointestinal anisakiasis and eight of the intestinal, and they were diagnosed during gastroscopy, by resection during surgery, and on the basis of typical clinical findings. All ten patients underwent both plain radiography and CT scanning of the abdomen. US was performed in five patients and an upper gastrointestinal series in one. Clinical data were evaluated with regard to a history of raw fish ingestion, time from ingestion of raw fish to onset of symptoms, location of abdominal pain, and laboratory data. Radiologic findings were analysed in terms of wall thickening and appearance, mesenteric infiltration, bowel dilatation proximal to lesion, and ascites. All patients had a history of recent ingestion of raw fish and complained of severe abdominal pain that occurred approximately 7-48 hours later. Pain occurred in the lower abdomen in five patients, the epigastrium in four, and the right lower abdomen in two. Laboratory test disclosed the leukocytosis in eight patients and eosinophilia in three. In all cases of intestinal anisakiasis, ileus was demonstrated on plain radiographs of the abdomen, while the upper gastrointestinal series showed mucosal thickening and multiple filling defects. US findings were bowel thickening and dilation, and on CT images, wall thickening revealed a target sign. Mesenteric infiltration and ascites were seen in seven patients. In four who underwent surgery, a cross-section through the lesion revealed submucosal eosinophilic granuloma with anisakis larva. Although the CT findings are non-specific, taken in conjunction with characteristic clinical findings, they may be helpful in the diagnosis of gastrointestinal anisakiasis. (author)

Radiographic findings of gastrointestinal anisakiasis: clinical and pathologic correlation

Energy Technology Data Exchange (ETDEWEB)

Chung, Tae Woong; Kang, Heoung Keun; Jeong, Yong Yeon [Medical School, Chonnam University, Kwangju (Korea, Republic of); And Others

2000-08-01

To evaluate the radiographic findings of gastrointestinal anisakiasis with clinical and pathologic correlation. In ten patients, findings were retrospectively analysed. There were two cases of the gastric variety of gastrointestinal anisakiasis and eight of the intestinal, and they were diagnosed during gastroscopy, by resection during surgery, and on the basis of typical clinical findings. All ten patients underwent both plain radiography and CT scanning of the abdomen. US was performed in five patients and an upper gastrointestinal series in one. Clinical data were evaluated with regard to a history of raw fish ingestion, time from ingestion of raw fish to onset of symptoms, location of abdominal pain, and laboratory data. Radiologic findings were analysed in terms of wall thickening and appearance, mesenteric infiltration, bowel dilatation proximal to lesion, and ascites. All patients had a history of recent ingestion of raw fish and complained of severe abdominal pain that occurred approximately 7-48 hours later. Pain occurred in the lower abdomen in five patients, the epigastrium in four, and the right lower abdomen in two. Laboratory test disclosed the leukocytosis in eight patients and eosinophilia in three. In all cases of intestinal anisakiasis, ileus was demonstrated on plain radiographs of the abdomen, while the upper gastrointestinal series showed mucosal thickening and multiple filling defects. US findings were bowel thickening and dilation, and on CT images, wall thickening revealed a target sign. Mesenteric infiltration and ascites were seen in seven patients. In four who underwent surgery, a cross-section through the lesion revealed submucosal eosinophilic granuloma with anisakis larva. Although the CT findings are non-specific, taken in conjunction with characteristic clinical findings, they may be helpful in the diagnosis of gastrointestinal anisakiasis. (author)

Production of rare earth polishing powders in Russia

International Nuclear Information System (INIS)

Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

1998-01-01

Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

Polishing of silicon based advanced ceramics

Science.gov (United States)

Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

2009-05-01

Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

Radiological effects

International Nuclear Information System (INIS)

Anon.

1978-01-01

Environmental monitoring in the vicinity of the Calvert Cliffs Nuclear Power Plant has been shown the radiation dose to the public from plant operation to be quite small. Calculations from the reported release rates yield 0.2 mrem whole body dose and 0.6 mrem skin dose for the calendar quarter of maximum release. Radioactivity discharges to the Chesapeake Bay have resulted in detectable concentrations of /sup 110m/Ag, 58 Co, and 60 Co in sediments and shellfish. The area yielding samples with detectable concentrations of plant effluents extends for roughly six miles up and down the western shore, with maximum values found at the plant discharge area. The radiation dose to an individual eating 29 doz oysters and 15 doz crabs (5 kg of each) taken from the plant discharge area would be about 4/1000 mrem whole body dose and 0.2 mrem gastrointestinal tract dose (about 0.007% and 0.5% of the applicable guidelines, respectively.) Comparison of these power plant-induced doses with the fluctuations in natural radiation dose already experienced by the public indicates that the power plant effects are insignificant. The natural variations are tens of times greater than the maximum doses resulting from Calvert Cliffs Power Plant. Although operations to date provide an insufficient basis to predict radiological impact of the Calvert Cliffs Plant over its operational lifetime, available data indicate that the plant should continue to operate with insignificant radiological impact, well within all applicable guidelines

Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

Science.gov (United States)

Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

2017-09-01

Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

Directory of Open Access Journals (Sweden)

François GOOSSENS

2015-05-01

Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

Upper gastrointestinal ectopic variceal bleeding treated with various endoscopic modalities: Case reports and literature review.

Science.gov (United States)

Park, Sang Woo; Cho, Eunae; Jun, Chung Hwan; Choi, Sung Kyu; Kim, Hyun Soo; Park, Chang Hwan; Rew, Jong Sun; Cho, Sung Bum; Kim, Hee Joon; Han, Mingui; Cho, Kyu Man

2017-01-01

Ectopic variceal bleeding is a rare (2-5%) but fatal gastrointestinal bleed in patients with portal hypertension. Patients with ectopic variceal bleeding manifest melena, hematochezia, or hematemesis, which require urgent managements. Definitive therapeutic modalities of ectopic varices are not yet standardized because of low incidence. Various therapeutic modalities have been applied on the basis of the experiences of experts or availability of facilities, with varying results. We have encountered eight cases of gastrointestinal ectopic variceal bleeding in five patients in the last five years. All patients were diagnosed with liver cirrhosis presenting melena or hematemesis. All patients were treated with various endoscopic modalities (endoscopic variceal obturation [EVO] with cyanoacrylate in five cases, endoscopic variceal band ligation (EVL) in two cases, hemoclipping in one case). Satisfactory hemostasis was achieved without radiologic interventions in all cases. EVO and EVL each caused one case of portal biliopathy, and EVL induced ulcer bleeding in one case. EVO generally accomplished better results of variceal obturations than EVL or hemoclipping, without serious adverse events. EVO may be an effective modality for control of ectopic variceal bleeding without radiologic intervention or surgery.

Technological Advances of Robot Assisted Polishing

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

Abdominal Hernias, Giant Colon Diverticulum, GIST, Intestinal Pneumatosis, Colon Ischemia, Cold Intussusception, Gallstone Ileus, and Foreign Bodies: Our Experience and Literature Review of Incidental Gastrointestinal MDCT Findings

OpenAIRE

Di Grezia, G.; Gatta, G.; Rella, R.; Donatello, D.; Falco, G.; Grassi, R.; Grassi, R.

2017-01-01

Incidental gastrointestinal findings are commonly detected on MDCT exams performed for various medical indications. This review describes the radiological MDCT spectrum of appearances already present in the past literature and in today’s experience of several gastrointestinal acute conditions such as abdominal hernia, giant colon diverticulum, GIST, intestinal pneumatosis, colon ischemia, cold intussusception, gallstone ileus, and foreign bodies which can require medical and surgical interven...

The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

Directory of Open Access Journals (Sweden)

Agnieszka Imbierowicz

2012-06-01

Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis.

Science.gov (United States)

Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu

2016-12-01

Polishing procedures might alter monolithic zirconia (MZ) surface resulting in phase changes that can be deleterious for clinical performance and antagonist tooth wear. This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​ MZ specimens (Katana Zirconia HT, Kuraray-Noritake) (12×12×1.8 mm(3)) were grinded and polished using one of the five systems assessed: BG: Silicone carbide polishers (Brownie, Greenie, Super Greenie); CG: Diamond impregnated ceramic polisher kit (Ceragloss); EV: Synthetically bonded grinder interspersed with diamond (EVE Kit); SL: Urethane coated paper with aluminium oxide grits (Soflex Finishing and Polishing System Kit) and DB: Diamond bur (8 µm). Polished specimens were initially roughened with 220 µm diamond burs (Grinding Bur-GB) (10 s, 160.000160,000 rpm) and considered for baseline measurements. Polishing regimens were performed for 10 s using a slow-speed hand piece under water-cooling except for SL, in a custom made device (750 g; 5000 and 75,000 rpm). Surface roughnesses, phase changes (XRD) were assessed, surface characterization was performed (SEM, EDS). The highest roughness was obtained with the EV system (1.11 µm) compared to those of other systems (0.13-0.4 µm) (pθ and minor peak at 34.94°2θ. While GB, CG, EV, SL and DB exhibited a peak shift to the left, BG demonstrated a right peak shift on the 2θ scale. Monoclinic phase change was not noted in any of the groups. All polishing methods, except BG, exhibited a peak shift towards the lower angles of the 2-theta scale. Since the peak shifts were in the order of fractions of an angle they are attributed to stress formation rather than a phase change in the material. Thus, all polishing systems tested may not be detrimental for the phase transformation of MZ. EV system resulted in the highest roughness and none of the polishing regimens restored the polishability to the

Comparative study about doses and radiological protection in gastrointestinal fluoroscopy

International Nuclear Information System (INIS)

Caneravo, L.V.; Borges, J.C.; Carlos, M.T.; Koch, H.A.

1996-01-01

The Radiation Protection and Dosimetry Institute of the National Nuclear Energy Commission (IRD/CNEN) and the Radiodiagnostic Service of the Rio de Janeiro Federal University Hospital, have been engaged in the development of quality control programs applied to radiodiagnostics, one of them concerning gastrointestinal fluoroscopy. Since fluoroscopy examinations normally deal with high doses, they represent an important fraction of public exposure. They deserve special attention and the risks to patients should be considered individually, not only as a population statistics. Another target should be the search for procedures that reduce doses to patients and, therefore, reduce dose to medical staff involved. This work describes steps followed and results obtained in the estimation of doses for patients and physicians. Investigated examinations were esophagography, gastroduodenal seriographic and colon with double contrast media, using conventional equipment with fluorescent screens, carried on by physicians engaged in the first year of medical residence. (authors). 9 refs., 1 fig., 2 tabs

Chemical Mechanical Polishing Optimization for 4H-SiC

National Research Council Canada - National Science Library

Neslen, Craig

2000-01-01

.... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

Laser polishing of 3D printed mesoscale components

International Nuclear Information System (INIS)

Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

2017-01-01

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

Laser polishing of 3D printed mesoscale components

Energy Technology Data Exchange (ETDEWEB)

Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

2017-05-31

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz

2005-01-01

The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

Sensing roughness and polish direction

DEFF Research Database (Denmark)

Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

2016-01-01

As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

Diagnostic evaluatuin of gastrointestinal tumors

International Nuclear Information System (INIS)

Linke, R.; Tatsch, K.

1998-01-01

Prior to surgery of gastrointestinal tumors exact information about tumor localization, extent and possible infiltration in adjacent structures are important. The task for radiological and scintigraphic methods is predominantly the preoperative tumor staging. The upper (esophagus, stomach, duodenum) and the lower (colon, rectum) gastrointestinal tract should be routinely investigated by endoscopy and endosonography. CT or MRI imaging may add information about tumor extent, infiltration in adjacent structures and pathologically enlarged lymph nodes. The latter may be detected with similar or higher sensitivity by PET as well. Furthermore, with PET it is possible to differentiate a tumor recurrence from postoperative scar tissue earlier than with conventional morphological imaging techniques, for example in colorectal cancer. Liver tumors should primarily be inspected sonographically followed by an MRI scan if dignity is uncertain. The receptor scintigraphy with radioactive ligands allows to further characterize a detected tumor. Benigne liver lesions can be distinguished from malignant tumors (metastasis, hepatocellular carcinoma [HCC]) by the neogalactoalbumin-(NGA-)scintigraphy, because NGA binds exclusively to the liver galactose receptors of normally functioning hepatocytes. For the differentiation between liver metastasis and HCC insulin scintigraphy can be used, since insulin binds significantly in HCC due to an overexpression of insulin receptors in these tumors. If a malignant process is suspected, additionally CT-arterioportography may be recommended, because this newer radiological technique is capable to visualize lesions smaller than 1 cm. In such cases PET is sensitive as well and due to increased glucose metabolism even small foci can be detected with comparably high sepcificity. The method of choice for the detection of a pancreatic tumor is endoscopic sonography. In most cases the dignity of the tumor can be verified by ERCP, but sometimes it is very

Effects of polishing procedures on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2009-04-01

Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

Polish Semantic Parser

Directory of Open Access Journals (Sweden)

Agnieszka Grudzinska

2000-01-01

Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

Microbiological flora and nail polish: a brief report.

Science.gov (United States)

Rayan, G M; Flournoy, D J; Schlageter, P

1994-11-01

Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

Smoking characteristics of Polish immigrants in Dublin.

LENUS (Irish Health Repository)

Kabir, Zubair

2008-01-01

BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

Reel-to-reel substrate tape polishing system

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

2005-06-21

Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

The radiological and endoscopie appearances of Crohn's disease of the upper gastro-intenstinal tract

International Nuclear Information System (INIS)

Kurtz, B.; Steinhardt, H.J.; Malchow, H.; Tuebingen Univ.

1982-01-01

Involvement of the upper gastrointestinal tract (oesophagus, stomach, duodenum, jejunum) accounted for 13% of endoscopically proven Crohn's disease in patients at the University Clinic, Tuebingen between 1973 and 1980. The basis for the diagnosis was the presence of epitheloid granulomas. The diagnosis was suspected in 26% of patients in endoscopic appearances alone. In these two groups, the appearances were similar, consisting of atypical or linear ulcers, cobble-stone lesions, chronic erosions, aphthous ulcers, stenoses, coarsening of the mucosa and areas of engorgement and granularity. Most patients were also examined radiologically. The radiological findings correspond with the endoscopic observations. Using a double contrast technique, mucosal changes could be demonstrated which, up to now, were only seen by endoscopy. If these findings are observed either radiologically or endoscopically, it is essential to examine the distal portions of the gut. (orig.) [de

Gastric schwannomas: radiological features with endoscopic and pathological correlation

Energy Technology Data Exchange (ETDEWEB)

Hong, H.S. [Department of Radiology, Severance Hospital, Yonsei University College of Medicine, Seodaemoon-gu, Seoul (Korea, Republic of); Ha, H.K. [Department of Radiology, University of Ulsan College of Medicine, Songpa-gu, Seoul (Korea, Republic of)], E-mail: hkha@amc.seoul.kr; Won, H.J.; Byun, J.H.; Shin, Y.M.; Kim, A.Y.; Kim, P.N.; Lee, M.-G. [Department of Radiology, University of Ulsan College of Medicine, Songpa-gu, Seoul (Korea, Republic of); Lee, G.H. [Internal Medicine, University of Ulsan College of Medicine, Songpa-gu, Seoul (Korea, Republic of); Kim, M.J. [Pathology, Asan Medical Center, University of Ulsan College of Medicine, Songpa-gu, Seoul (Korea, Republic of)

2008-05-15

Aim: To describe the radiological, endoscopic, and pathological findings of gastric schwannomas in 16 patients. Materials and methods: The radiological, endoscopic, and pathological findings of 16 surgically proven cases of gastric schwannoma were retrospectively reviewed. All patients underwent computed tomography (CT) and four patients were evaluated with upper gastrointestinal series. Two radiologists reviewed the CT and upper gastrointestinal series images by consensus with regard to tumour size, contour, margin, and growth pattern, the presence or absence of ulcer, cystic change, and the CT enhancement pattern. Endoscopy was performed in eight of these 16 patients. Six patients underwent endoscopic ultrasonography. Pathological specimens were obtained from and reviewed in all 16 patients. Immunohistochemistry was performed for c-kit, CD34, smooth muscle actin, and S-100 protein. Results: On radiographic examination, gastric schwannomas appeared as submucosal tumours with the CT features of well-demarcated, homogeneous, and uncommonly ulcerated masses. Endoscopy with endoscopic ultrasonography demonstrated homogeneous, submucosal masses contiguous with the muscularis propria in all six examined cases. On pathological examination, gastric schwannomas appeared as well-circumscribed and homogeneous tumours in the muscularis propria and consisted microscopically of interlacing bundles of spindle cells. Strong positivity for S-100 protein was demonstrated in all 16 cases on immunohistochemistry. Conclusion: Gastric schwannomas appear as submucosal tumours of the stomach and have well-demarcated and homogeneous features on CT, endoscopic ultrasonography, and gross pathology. Immunohistochemistry consistently reveals positivity for S-100 protein in the tumours.

Gastric schwannomas: radiological features with endoscopic and pathological correlation

International Nuclear Information System (INIS)

Hong, H.S.; Ha, H.K.; Won, H.J.; Byun, J.H.; Shin, Y.M.; Kim, A.Y.; Kim, P.N.; Lee, M.-G.; Lee, G.H.; Kim, M.J.

2008-01-01

Aim: To describe the radiological, endoscopic, and pathological findings of gastric schwannomas in 16 patients. Materials and methods: The radiological, endoscopic, and pathological findings of 16 surgically proven cases of gastric schwannoma were retrospectively reviewed. All patients underwent computed tomography (CT) and four patients were evaluated with upper gastrointestinal series. Two radiologists reviewed the CT and upper gastrointestinal series images by consensus with regard to tumour size, contour, margin, and growth pattern, the presence or absence of ulcer, cystic change, and the CT enhancement pattern. Endoscopy was performed in eight of these 16 patients. Six patients underwent endoscopic ultrasonography. Pathological specimens were obtained from and reviewed in all 16 patients. Immunohistochemistry was performed for c-kit, CD34, smooth muscle actin, and S-100 protein. Results: On radiographic examination, gastric schwannomas appeared as submucosal tumours with the CT features of well-demarcated, homogeneous, and uncommonly ulcerated masses. Endoscopy with endoscopic ultrasonography demonstrated homogeneous, submucosal masses contiguous with the muscularis propria in all six examined cases. On pathological examination, gastric schwannomas appeared as well-circumscribed and homogeneous tumours in the muscularis propria and consisted microscopically of interlacing bundles of spindle cells. Strong positivity for S-100 protein was demonstrated in all 16 cases on immunohistochemistry. Conclusion: Gastric schwannomas appear as submucosal tumours of the stomach and have well-demarcated and homogeneous features on CT, endoscopic ultrasonography, and gross pathology. Immunohistochemistry consistently reveals positivity for S-100 protein in the tumours

Fecal pancreatic elastase-1 levels in older individuals without known gastrointestinal diseases or diabetes mellitus

Directory of Open Access Journals (Sweden)

Idziak Joanna

2011-01-01

Full Text Available Abstract Background Structural changes occur in the pancreas as a part of the natural aging process. With aging, also the incidence of maldigestive symptoms and malnutrition increases, raising the possibility that these might be caused at least in part by inadequate pancreatic enzyme secretion due to degenerative processes and damage of the gland. Fecal elastase-1 is a good marker of pancreatic exocrine secretion. The aim of this study was to investigate the fecal elastase-1 levels among over 60 years old Finnish and Polish healthy individuals without any special diet, known gastrointestinal disease, surgery or diabetes mellitus. Methods A total of 159 patients participated in this cross-sectional study. 106 older individuals (aged 60-92 years were recruited from outpatient clinics and elderly homes. They were divided to three age groups: 60-69 years old (n = 31; 70-79 years old (n = 38 and over 80 years old (n = 37. 53 young subjects (20-28 years old were investigated as controls. Inclusion criteria were age over 60 years, normal status and competence. Exclusion criteria were any special diet, diabetes mellitus, any known gastrointestinal disease or prior gastrointestinal surgery. Fecal elastase-1 concentration was measured from stool samples with an ELISA that uses two monoclonal antibodies against different epitopes of human elastase-1. Results Fecal elastase-1 concentrations correlated negatively with age (Pearson r = -0,3531, P P Conclusion In our study one fifth of healthy older individuals without any gastrointestinal disorder, surgery or diabetes mellitus suffer from pancreatic exocrine insufficiency and might benefit from enzyme supplementation therapy.

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

2005-01-01

Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

19th Polish Control Conference

CERN Document Server

Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

2017-01-01

This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

International Nuclear Information System (INIS)

Chomicki, O. A.

2008-01-01

Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

Cannabinoids cases in polish athletes

OpenAIRE

A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

2009-01-01

The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

The social shaping of innovation in polish companies

DEFF Research Database (Denmark)

Lorentzen, Anne

2003-01-01

The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

Semi-strong informational efficiency in the Polish foreign exchange market

OpenAIRE

Luksz Goczek

2015-01-01

During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

Symmetry or asymmetry? Cross-border openness of service providers in Polish-Czech and Polish-German border towns

Directory of Open Access Journals (Sweden)

Dołzbłasz Sylwia

2015-03-01

Full Text Available The symmetry and/or asymmetry in terms of cross-border openness of service providers is examined in this article, for the cases of two border twin towns: Cieszyn/Český Těšín at the Polish-Czech border, and Gubin/Guben at the Polish-German border. To assess the level of openness of firms towards clients from the other side of the border, four trans-border categories were examined: neighbour’s language visible at store location; business offers in the language of the neighbour; the possibilities of payment in the neighbour’s currency; and the staff’s knowledge of the language. This enabled a comparison of both parts of the particular twin towns in relation to the character of cross-border openness, as well as an assessment of their symmetry/asymmetry. Comparisons of Gubin/Guben and Cieszyn/Český Těšín with respect to the analysed features were also carried out. The analysis shows significant variation in the level of cross-border openness towards clients from neighbouring countries. Whereas in the Polish-Czech town a relative symmetry was observed, in the Polish-German case, significant asymmetry was noted.

Transformation of the Polish Banking Sector

Directory of Open Access Journals (Sweden)

Marek Stefański

2009-07-01

Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single

Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

Science.gov (United States)

Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

2016-01-01

This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

Directory of Open Access Journals (Sweden)

Weingaertner, W. L.

2010-10-01

Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

Cannabinoids cases in polish athletes

Directory of Open Access Journals (Sweden)

A Pokrywka

2009-07-01

Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

Composite adaptive control of belt polishing force for aero-engine blade

Science.gov (United States)

Zhsao, Pengbing; Shi, Yaoyao

2013-09-01

The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and

Monitoring of Robot Assisted Polishing through parameters of acoustic emission

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Bilberg, Arne

The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

Non-traumatic abdominal emergencies: imaging and intervention in gastrointestinal hemorrhage and ischemia

Energy Technology Data Exchange (ETDEWEB)

Bilbao, J.I.; Torres, E.; Martinez-Cuesta, A. [Department of Radiology, Clinica Universitaria de Navarra, Avda Pio XII, s/n, Apt. 192, 31080 Pamplona (Spain)

2002-09-01

Radiologist and radiological techniques play a crucial role in imaging and interventional procedures in gastrointestinal hemorrhage and ischemia. They are involved in emergency situations that may lead to the death of the patient. Therefore correct diagnosis and treatment are absolutely decisive. We have a great potential in tools of diagnosis, with angiography serving not only as the gold standard for diagnosis even offering a potentially effective treatment for various pathologies. Nevertheless, other techniques have developed greatly during the past decade, including in standard protocols for the management of vascular pathologies such as those discussed here. Ultrasound, computed tomography, and magnetic resonance imaging and their applications in the vascular field such as in as Doppler ultrasound, computed tomography angiography, and magnetic resonance angiography provide sensitivity as high as that of angiography for detecting vascular-dependent lesions and for evaluating and excluding other causes of acute or chronic abdomen disorders. This contribution evaluates clinical aspects, various imaging techniques, and interventional effectiveness related to gastrointestinal hemorrhage and ischemia. (orig.)

Non-traumatic abdominal emergencies: imaging and intervention in gastrointestinal hemorrhage and ischemia

International Nuclear Information System (INIS)

Bilbao, J.I.; Torres, E.; Martinez-Cuesta, A.

2002-01-01

Radiologist and radiological techniques play a crucial role in imaging and interventional procedures in gastrointestinal hemorrhage and ischemia. They are involved in emergency situations that may lead to the death of the patient. Therefore correct diagnosis and treatment are absolutely decisive. We have a great potential in tools of diagnosis, with angiography serving not only as the gold standard for diagnosis even offering a potentially effective treatment for various pathologies. Nevertheless, other techniques have developed greatly during the past decade, including in standard protocols for the management of vascular pathologies such as those discussed here. Ultrasound, computed tomography, and magnetic resonance imaging and their applications in the vascular field such as in as Doppler ultrasound, computed tomography angiography, and magnetic resonance angiography provide sensitivity as high as that of angiography for detecting vascular-dependent lesions and for evaluating and excluding other causes of acute or chronic abdomen disorders. This contribution evaluates clinical aspects, various imaging techniques, and interventional effectiveness related to gastrointestinal hemorrhage and ischemia. (orig.)

Neuroendocrine tumors of the gastrointestinal tract; Multimodale Bildgebung neuroendokriner Tumoren des Gastrointestinaltrakts

Energy Technology Data Exchange (ETDEWEB)

Holzapfel, Konstantin; Eiber, Matthias; Rummeny, Ernst J. [Klinikum rechts der Isar der Technischen Univ. Muenchen (Germany). Inst. fuer Radiologie; Gaertner, Florian C. [Bonn Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

2014-03-15

Neuroendocrine tumors (neuroendokrine Tumoren) are rare entities. They can be found in all organs and show substantial biologic heterogeneity depending on involved organ, clinical symptoms and histopathologic morphology. Involvement of organs like larynx, cervix uteri, ovary, gallbladder, liver or kidney is extensively rare. The majority of neuroendokrine Tumoren are found in gastrointestinal tract and lung and are classified as neuroendokrine Tumoren of foregut (stomach, duodenum, pancreas, lung), midgut (jejunum, ileum, appendix, right side of the colon) and hindgut (left side of the colon, rectum). The role of imaging is to localize and delineate the primary tumor and to detect metastases. In the diagnosis of neuroendokrine Tumoren radiologic techniques like computed tomography (CT) and magnetic resonance imaging (MRI) are applied. In certain cases nuclear medicine techniques like somatostatin receptor scintigraphy (SRS) and positron emission tomography (PET) using radioactively labelled somatostatin analogues are used. The present article reviews characteristic imaging findings of neuroendokrine Tumoren of the gastrointestinal tract. (orig.)

Trace element analysis of nail polishes

International Nuclear Information System (INIS)

Misra, G.; Mittal, V.K.; Sahota, H.S.

1999-01-01

Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

Educational treasures in Radiology: The Radiology Olympics - striving for gold in Radiology education

OpenAIRE

Talanow, Roland

2010-01-01

This article focuses on Radiology Olympics (www.RadiologyOlympics.com) - a collaboration with the international Radiology community for Radiology education, Radiolopolis (www.Radiolopolis.com). The Radiology Olympics honour the movers and shakers in Radiology education and offer an easy to use platform for educating medical professionals based on Radiology cases.

Factors influencing the surface quality of polished tool steels

International Nuclear Information System (INIS)

Rebeggiani, S; Rosén, B-G

2014-01-01

Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

New perspectives in hydrodynamic radial polishing techniques for optical surfaces

Science.gov (United States)

Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

2004-09-01

In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

New techniques in the tissue diagnosis of gastrointestinal neuromuscular diseases

Institute of Scientific and Technical Information of China (English)

Charles H Knowles; Joanne E Martin

2009-01-01

Gastrointestinal neuromuscular diseases are a clinically heterogeneous group of disorders of children and adults in which symptoms are presumed or proven to arise as a result of neuromuscular (including interstitial cell of Cajal) dysfunction. Common to most of these diseases are symptoms of impaired motor activity which manifest as slowed or obstructed transit with or without evidence of transient or persistent radiological visceral dilatation. A variety of histopathological techniques and allied investigations are being increasingly applied to tissue biopsies from such patients. This review outlines some of the more recent advances in this field, particularly in the most contentious area of small bowel disease manifesting as intestinal pseudo-obstruction.

Gastrointestinal leiomyosarcoma - unusual sites: Esophagus, colon and porta hepatis

International Nuclear Information System (INIS)

Balthazar, E.J.

1981-01-01

This paper is based on a retrospective analysis of the radiologic findings of 6 newly proven cases of primary gastrointestinal leiomyosarcomas located in unusual sites. The radiographic and angiographic features of esophageal, colonic, and porta hepatis leiomyosarcomas are described and illustrated. General background information together with a brief review of the literature regarding these lesions are provided. The difficulties encountered in the preoperative diagnosis are explained by the protean and nonspecific clinical and radiographic features of many of these tumors. In addition, although myomatous tumors of the liver and porta hepatis are angiogaphically hypervascular, similar tumors of the colon are slight to moderately vascular, and tumors of the esophagus are avascular. (orig.)

Damage-free polishing of monocrystalline silicon wafers without chemical additives

International Nuclear Information System (INIS)

Biddut, A.Q.; Zhang, L.C.; Ali, Y.M.; Liu, Z.

2008-01-01

This investigation explores the possibility and identifies the mechanism of damage-free polishing of monocrystalline silicon without chemical additives. Using high resolution electron microscopy and contact mechanics, the study concludes that a damage-free polishing process without chemicals is feasible. All forms of damages, such as amorphous Si, dislocations and plane shifting, can be eliminated by avoiding the initiation of the β-tin phase of silicon during polishing. When using 50 nm abrasives, the nominal pressure to achieve damage-free polishing is 20 kPa

Radiologic evaluation of intestinal obstruction in the neonates

Energy Technology Data Exchange (ETDEWEB)

Kim, Jin Hee; Kim, Dong Woo; Lee, Eun Suk; Kwon, Sun Young [Eul Ji General Hospital, Daejeon (Korea, Republic of); Lee, Sang Young [Chonbuk National University College of Medicine, Jeonju (Korea, Republic of); Kang, Hye Jeong [Eul Ji General Hospital, Seoul (Korea, Republic of)

1995-10-15

The purpose of this study is to evaluate the radiologic findings of the intestinal obstruction in the neonate according to the causes and to determine the findings useful for the differential diagnosis. The materials consisted of 29 neonates with surgically proven gastrointestinal tract obstruction. We analyzed simple abdominal radiography and barium study comparing with the operative findings. The causes of intestinal obstruction were gastric atresia in 1 case, duodenal atresia in 3 cases, small bowel atresia in 11 cases (jejunal; 3 cases, ileal; 8 cases), colonic atresia in 2 cases, Hirschsprung's disease in 9 cases, ano-rectal anomaly in 6 cases, midgut volvulus in 2 cases, and Meckel's diverticulum in 1 case. Vomiting was noted in the all cases. The abdominal distension was not noted in the cases of gastric atresia, duodenal atresia, and proximal jejunal atresia. The meconium passage was noted in 2 cases of ileal atresia and 3 cases of Hirschsprung's disease. On barium study, site of obstruction was predicted accurately in gastric atresia, duodenal atresia, proximal jejunal atresia, and colonic atresia but it was not possible in distal jejunal atresia and ileal atresia. The microcolon was noted in 2 cases of jejunal atresia, 4 cases of ileal atresia, and 2 cases of colonic atresia. Out of 9 Hirschsprung's disease transition zones were seen on rectum or rectosigmoid junction in 7 cases and barium study was normal in 2 cases. In the diagnosis of neonatal intestinal obstruction, the basic radiologic studies such as simple abdominal radiography and gastrointestinal contrast study was useful for the differential diagnosis of the proximal bowel loop atresia colonic atresia, and midgut volvulus.

Radiologic evaluation of intestinal obstruction in the neonates

International Nuclear Information System (INIS)

Kim, Jin Hee; Kim, Dong Woo; Lee, Eun Suk; Kwon, Sun Young; Lee, Sang Young; Kang, Hye Jeong

1995-01-01

The purpose of this study is to evaluate the radiologic findings of the intestinal obstruction in the neonate according to the causes and to determine the findings useful for the differential diagnosis. The materials consisted of 29 neonates with surgically proven gastrointestinal tract obstruction. We analyzed simple abdominal radiography and barium study comparing with the operative findings. The causes of intestinal obstruction were gastric atresia in 1 case, duodenal atresia in 3 cases, small bowel atresia in 11 cases (jejunal; 3 cases, ileal; 8 cases), colonic atresia in 2 cases, Hirschsprung's disease in 9 cases, ano-rectal anomaly in 6 cases, midgut volvulus in 2 cases, and Meckel's diverticulum in 1 case. Vomiting was noted in the all cases. The abdominal distension was not noted in the cases of gastric atresia, duodenal atresia, and proximal jejunal atresia. The meconium passage was noted in 2 cases of ileal atresia and 3 cases of Hirschsprung's disease. On barium study, site of obstruction was predicted accurately in gastric atresia, duodenal atresia, proximal jejunal atresia, and colonic atresia but it was not possible in distal jejunal atresia and ileal atresia. The microcolon was noted in 2 cases of jejunal atresia, 4 cases of ileal atresia, and 2 cases of colonic atresia. Out of 9 Hirschsprung's disease transition zones were seen on rectum or rectosigmoid junction in 7 cases and barium study was normal in 2 cases. In the diagnosis of neonatal intestinal obstruction, the basic radiologic studies such as simple abdominal radiography and gastrointestinal contrast study was useful for the differential diagnosis of the proximal bowel loop atresia colonic atresia, and midgut volvulus

Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

Science.gov (United States)

Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

A web-based test of residents' skills in diagnostic radiology

International Nuclear Information System (INIS)

Finlay, K.; Norman, G.R.; Keane, D.R.; Stolberg, H.

2006-01-01

To develop an objective, Web-based tool for evaluating residents' knowledge of diagnostic radiology. We developed and tested a Web-based evaluation tool (the Diagnostic Radiology Skills Test) that consists of 3 tests, one in each of 3 domains of diagnostic radiology: chest, gastrointestinal, and musculoskeletal imaging. Each test comprises 30 cases representing a range of difficulty in the domain, including normal states, normal variants, typical cases of common diagnoses, and cases with more subtle findings. Cases are presented with a long menu of domain-specific possible diagnoses (response options), each coded for diagnostic appropriateness. Our subjects were 21 residents in postgraduate year (PGY) 2 to 5 and 11 experts in diagnostic radiology. Subjects accessed the tool via a Web site on our Web server. Residents test results were compared for reliability and validity across domain, case, and training level. In addition, results were correlated with commonly used established and objective evaluation tools. The tool demonstrated consistent monotonic improvement in performance with training level. It showed acceptable reliability in discriminating between residents at different performance levels, both within and across training levels (r = 0.53 within level and 0.69 across levels). Test results also had concurrent validity against the American College of Radiology In-Training Examination, a widely accepted objective assessment tool (r = 0.65, P < 0.01), and 2 Objective Structured Clinical Examinations (OSCEs) focusing on diagnostic skills (r = 0.78 and r 0.69, P < 0.01, respectively). Our study demonstrates the feasibility of a Web-based, standardized, objective assessment method for evaluating residents' performance. (author)

Strain-free polished channel-cut crystal monochromators: a new approach and results

Science.gov (United States)

Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

2017-08-01

The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

Can Reduced-Step Polishers Be as Effective as Multiple-Step Polishers in Enhancing Surface Smoothness?

Science.gov (United States)

Kemaloglu, Hande; Karacolak, Gamze; Turkun, L Sebnem

2017-02-01

The aim of this study was to evaluate the effects of various finishing and polishing systems on the final surface roughness of a resin composite. Hypotheses tested were: (1) reduced-step polishing systems are as effective as multiple-step systems on reducing the surface roughness of a resin composite and (2) the number of application steps in an F/P system has no effect on reducing surface roughness. Ninety discs of a nano-hybrid resin composite were fabricated and divided into nine groups (n = 10). Except the control, all of the specimens were roughened prior to be polished by: Enamel Plus Shiny, Venus Supra, One-gloss, Sof-Lex Wheels, Super-Snap, Enhance/PoGo, Clearfil Twist Dia, and rubber cups. The surface roughness was measured and the surfaces were examined under scanning electron microscope. Results were analyzed with analysis of variance and Holm-Sidak's multiple comparisons test (p One-gloss, Enamel Plus Shiny, and Venus Supra groups. (1) The number of application steps has no effect on the performance of F/P systems. (2) Reduced-step polishers used after a finisher can be preferable to multiple-step systems when used on nanohybrid resin composites. (3) The effect of F/P systems on surface roughness seems to be material-dependent rather than instrument- or system-dependent. Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017). © 2016 Wiley Periodicals, Inc.

Surface geometry of three packable and one hybrid composite after polishing.

Science.gov (United States)

Jung, Martin; Bruegger, Hilka; Klimek, Joachim

2003-01-01

This study evaluated the surface quality of four composite materials after polishing with six different polishing techniques. Eighty specimens were made using three packable composites (Definite/Degussa, SureFil/ Dentsply and Solitaire/Heraeus-Kulzer) and one hybrid composite (Herculite XRV/Kerr). Five specimens of each material were polished using flexible Sof-Lex discs. The remaining 75 specimens of each composite were prepared using three finishing protocols: a single 30 microm diamond (n = 25), two finishing diamonds (30/20 microm; n = 25) and a 30 microm diamond followed by a tungsten carbide finishing bur (n = 25). Final polishing of each of the three finishing groups was accomplished with SuperBuff, Diafix-oral, OneGloss, Astropol and HaWe Composite Polishers (n = 5, each). Surface roughness was evaluated quantitatively by laser-stylus profilometry. Average roughness (R(a)) was calculated; statistical analysis of the data was performed with two-way ANOVA and Scheffé post-hoc tests. The polished surfaces were examined qualitatively by SEM. The results showed significant effects on surface roughness from the different composites (p = 0.011) and polishing systems (p < 0.001). After polishing, the Solitaire surfaces (R(a) = 0.72 microm) were smoother than Definite (R(a) = 0.87 microm) and SureFil (R(a) = 0.89 microm) and significantly smoother than Herculite (R(a) = 0.92 microm; p = 0.011). Three of the polishing methods (SuperBuff, Diafix-oral and Astropol) achieved lower R(a)-values than Sof-Lex discs. The polishing quality of the one-step systems SuperBuff and Diafix-oral was strongly affected by the initial finishing protocol.

Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

Science.gov (United States)

Kumaran, S. Chidambara; Shunmugam, M. S.

2017-10-01

Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

Development of hybrid fluid jet/float polishing process

Science.gov (United States)

Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

2013-09-01

On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

Sensory factors affecting female consumers' acceptability of nail polish.

Science.gov (United States)

Sun, C; Koppel, K; Adhikari, K

2015-12-01

The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

Note on the polishing of small spheres of ferrimagnetic materials

Energy Technology Data Exchange (ETDEWEB)

Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

1961-07-01

This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

Polish energy-system modernisation

International Nuclear Information System (INIS)

Drozdz, M.

2003-01-01

The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

Initial polishing time affects gloss retention in resin composites.

Science.gov (United States)

Waheeb, Nehal; Silikas, Nick; Watts, David

2012-10-01

To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

Sexual Health of Polish Athletes with Disabilities

Directory of Open Access Journals (Sweden)

Ryszard Plinta

2015-06-01

Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

Novel cavitation fluid jet polishing process based on negative pressure effects.

Science.gov (United States)

Chen, Fengjun; Wang, Hui; Tang, Yu; Yin, Shaohui; Huang, Shuai; Zhang, Guanghua

2018-04-01

Traditional abrasive fluid jet polishing (FJP) is limited by its high-pressure equipment, unstable material removal rate, and applicability to ultra-smooth surfaces because of the evident air turbulence, fluid expansion, and a large polishing spot in high-pressure FJP. This paper presents a novel cavitation fluid jet polishing (CFJP) method and process based on FJP technology. It can implement high-efficiency polishing on small-scale surfaces in a low-pressure environment. CFJP uses the purposely designed polishing equipment with a sealed chamber, which can generate a cavitation effect in negative pressure environment. Moreover, the collapse of cavitation bubbles can spray out a high-energy microjet and shock wave to enhance the material removal. Its feasibility is verified through researching the flow behavior and the cavitation results of the negative pressure cavitation machining of pure water in reversing suction flow. The mechanism is analyzed through a computational fluid dynamics simulation. Thus, its cavitation and surface removal mechanisms in the vertical CFJP and inclined CFJP are studied. A series of polishing experiments on different materials and polishing parameters are conducted to validate its polishing performance compared with FJP. The maximum removal depth increases, and surface roughness gradually decreases with increasing negative outlet pressures. The surface becomes smooth with the increase of polishing time. The experimental results confirm that the CFJP process can realize a high material removal rate and smooth surface with low energy consumption in the low-pressure environment, together with compatible surface roughness to FJP. Copyright © 2017 Elsevier B.V. All rights reserved.

Presentation of the verbs in Bulgarian-Polish electronic dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2014-09-01

Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

"Agricultural budget" and the competitiveness of the Polish agriculture

OpenAIRE

Lenkiewicz, Stanisław; Rokicki, Bartłomiej

2014-01-01

The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

Nonvariceal upper gastrointestinal bleeding

International Nuclear Information System (INIS)

Burke, Stephen J.; Weldon, Derik; Sun, Shiliang; Golzarian, Jafar

2007-01-01

Nonvariceal upper gastrointestinal bleeding (NUGB) remains a major medical problem even after advances in medical therapy with gastric acid suppression and cyclooxygenase (COX-2) inhibitors. Although the incidence of upper gastrointestinal bleeding presenting to the emergency room has slightly decreased, similar decreases in overall mortality and rebleeding rate have not been experienced over the last few decades. Many causes of upper gastrointestinal bleeding have been identified and will be reviewed. Endoscopic, radiographic and angiographic modalities continue to form the basis of the diagnosis of upper gastrointestinal bleeding with new research in the field of CT angiography to diagnose gastrointestinal bleeding. Endoscopic and angiographic treatment modalities will be highlighted, emphasizing a multi-modality treatment plan for upper gastrointestinal bleeding. (orig.)

Nonvariceal upper gastrointestinal bleeding

Energy Technology Data Exchange (ETDEWEB)

Burke, Stephen J.; Weldon, Derik; Sun, Shiliang [University of Iowa, Department of Radiology, Iowa, IA (United States); Golzarian, Jafar [University of Iowa, Department of Radiology, Iowa, IA (United States); University of Iowa, Department of Radiology, Carver College of Medicine, Iowa, IA (United States)

2007-07-15

Nonvariceal upper gastrointestinal bleeding (NUGB) remains a major medical problem even after advances in medical therapy with gastric acid suppression and cyclooxygenase (COX-2) inhibitors. Although the incidence of upper gastrointestinal bleeding presenting to the emergency room has slightly decreased, similar decreases in overall mortality and rebleeding rate have not been experienced over the last few decades. Many causes of upper gastrointestinal bleeding have been identified and will be reviewed. Endoscopic, radiographic and angiographic modalities continue to form the basis of the diagnosis of upper gastrointestinal bleeding with new research in the field of CT angiography to diagnose gastrointestinal bleeding. Endoscopic and angiographic treatment modalities will be highlighted, emphasizing a multi-modality treatment plan for upper gastrointestinal bleeding. (orig.)

Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

Science.gov (United States)

Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography.

Science.gov (United States)

Fischer, N G; Tsujimoto, A; Baruth, A G

2018-03-16

Limited information is available on how to polish and finish zirconia surfaces following computer-aided design/computer-aided manufacturing (CAD/CAM), specifically, how differing application forces and reuse of zirconia polishing systems affect zirconia topography. To determine the effect of differing, clinically relevant, polishing application forces and multiple usages of polishing burs on the surface topography of CAD/CAM zirconia. One hundred twenty 220-grit carbide finished zirconia disks were sintered according to manufacturer's directions and divided into two groups for the study of two coarse polishing bur types. Each group was divided into subgroups for polishing (15,000 rpm) at 15 seconds for 1.0 N, 4.5 N, or 11 N of force using a purpose-built fixture. Subgroups were further divided to study the effects of polishing for the first, fifth, 15th, and 30th bur use, simulating clinical procedures. Unpolished surfaces served as a control group. Surfaces were imaged with noncontact optical profilometry (OP) and atomic force microscopy (AFM) to measure average roughness values (Ra). Polishing burs were optically examined for wear. Scanning electron microscopy (SEM) was performed on burs and zirconia surfaces. One-way ANOVA with post hoc Tukey HSD (honest significant difference) tests (α=0.05) were used for statistical analyses. AFM and OP Ra values of all polished surfaces were significantly lower than those of the unpolished control. Different polishing forces and bur reuse showed no significant differences in AFM Ra. However, significant differences in OP Ra were found due to differing application forces and bur reuse between the first and subsequent uses. SEM and optical micrographs revealed notable bur wear, increasing with increasing reuse. SEM and AFM micrographs clearly showed polished, periodic zirconia surfaces. Nanoscale topography, as analyzed with kurtosis and average groove depth, was found dependent on the specific polishing bur type. These in

The Czechoslovak-Polish Club in Brno (1925–1939)

Czech Academy of Sciences Publication Activity Database

Baron, Roman

2011-01-01

Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

Radiation dose measurement in gastrointestinal studies

International Nuclear Information System (INIS)

Sulieman, A.; Elzaki, M.; Kappas, C.; Theodorou, K.

2011-01-01

Barium studies investigations (barium swallow, barium meal and barium enema) are the basic routine radiological examination, where barium sulphate suspension is introduced to enhance image contrast of gastrointestinal tracts. The aim of this study was to quantify the patients' radiation doses during barium studies and to estimate the organ equivalent dose and effective dose with those procedures. A total of 33 investigations of barium studies were measured by using thermoluminescence dosemeters. The result showed that the patient entrance surface doses were 12.6±10, 44.5±49 and 35.7±50 mGy for barium swallow, barium meal, follow through and enema, respectively. Effective doses were 0.2, 0.35 and 1.4 mSv per procedure for barium swallow, meal and enema respectively. Radiation doses were comparable with the previous studies. A written protocol for each procedure will reduce the inter-operator variations and will help to reduce unnecessary exposure. (authors)

Performance test of condensate polishing system for Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

You Zhaojin; Qian Shijun; Lu Ruiting

1995-11-01

The flow chart, resin performance and water quality specifications of the condensate polishing system for Qinshan Nuclear Power Plant (QNPP) are briefly described. The initial regeneration process and the following service of the condensate polishing system are introduced. And the ability to remove corrosion products and ionic impurities of the condensate polishing system are verified during start-up, normal power operation and condenser leakage of the plant. The result shows that the performance of condensate polishing system in QNPP can completely meet the design requirements. Especially during the start-up of the unit or the leakage of the condenser, despite the inlet water quality of the polishers is far worse than the specified standard, the outlet water quality is still controlled within the indexes. Finally, several existing problems, such as 'volume ratio between resins is not optimum' and 'the inert resin and anion resin can not be stratified completely', in the condensate polishing system are also discussed. (4 refs., 1 fig., 8 tabs.)

Influence of polishing on surface roughness following toothbrushing wear of composite resins.

Science.gov (United States)

Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

2017-01-01

This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

Surface analysis of polished fused-silica laser lenses by ion-scattering spectrometry

International Nuclear Information System (INIS)

Orvek, K.; Steward, S.A.

1982-01-01

New advances in high-powered glass lasers, particularly the NOVA system, have resulted in a need for lenses having higher damage threshold values than those now available. It is currently thought that surface contaminants on the lenses are responsible for initiating part of the damage. These contaminants are apparently introduced during the final polishing stages. In this study, we used ion-scattering spectrometry (ISS) to identify contaminants arising through the use of different polishing techniques. Five lenses were studied, each having undergone different polishing procedures. The first lens was not polished after receiving it from the manfacturer (No. 381). Ion microprobe data were available for this lens, and they were compared to ISS results. The second lens had been polished with rouge, a polishing compound no longer in use (No. 796). This sample served as a further check on the ISS results. The third lens was studied as received from the manufacturer - with no handling or cleaning (No. 802). The final two lenses had both been polished using high-purity ceria, cerium oxide (No. 800 and No. 801). The difference between these two was that No. 800 was polished using a nylon lap, and No. 801 was polished using pitch as a lap. The 800-series lenses were all made from the same batch, and constituted the major part of the investigation

1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

International Nuclear Information System (INIS)

Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

1975-01-01

Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Science.gov (United States)

Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

2017-09-01

Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

Electrolytic polishing system for space age materials

International Nuclear Information System (INIS)

Coons, W.C.; Iosty, L.R.

1976-01-01

A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

Effects of different polishing techniques on the surface roughness of dental porcelains

Directory of Open Access Journals (Sweden)

Işil Sarikaya

2010-02-01

Full Text Available OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm were prepared for each feldspathic (Vita VMK 95, Ceramco III and low-fusing dental porcelain (Matchmaker. Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II, (12x14x18 mm were cut into 2-mm-thick slices (12x14 mm with low speed saw. The prepared specimens were divided into 11 groups (n=5 representing different polishing techniques including control ((C no surface treatment, glaze (G and other 9 groups that were finished and polished with polishing discs (Sof-Lex (Sl, two porcelain polishing kits (NTI (Pk, Dialite II (Di, a diamond polishing paste (Sparkle (Sp, a zirconium silicate based cleaning and polishing prophy paste (Zircate (Zr, an aluminum oxide polishing paste (Prisma Gloss (Pg, and combinations of them. The surface roughness of all groups was measured with a profilometer. The data were analyzed with a 2-way analysis of variance, and the mean values were compared by the Tukey Honestly Significant Difference test (a=0.05. RESULTS: For all porcelain material groups, the lowest Ra values were observed in Group Gl, Group Sl, Group Pk, and Group Di, which were not significantly different from each other (p>0.05.When comparing the 4 different porcelain materials, the machinable feldspathic porcelain block group (Mark II demonstrated statistically significantly less Ra values than the other porcelain materials tested (p<0.05. No significant difference was observed between the VMK 95 and Ceramco III porcelain groups (p=0.919, also these groups demonstrated the highest Ra values. CONCLUSION: Subjected to surface roughness, the surfaces obtained with polishing and/or cleaning-prophy paste materials used alone were rougher compared to the surfaces finished using Sof-lex, Dialite, and NTI polishing kit

Gastrointestinal tuberculosis.

Science.gov (United States)

Galloway, D J; Scott, R N

1986-10-01

In the developed countries gastrointestinal tuberculosis is no longer common in clinical practice. In this setting the importance of the condition lies in the vagaries of its presentation and the fact that it is eminently treatable, usually by a combination of chemotherapy and surgery. The clinical features and complications of gastrointestinal tuberculosis are highlighted by the seven cases which we report. Diagnosis and treatment of this condition is discussed and attention is drawn to the importance of case notification. Clinicians should bear in mind the diagnosis of gastrointestinal tuberculosis when dealing with any patient with non-specific abdominal symptoms.

Zinc and gastrointestinal disease

Institute of Scientific and Technical Information of China (English)

Sonja; Skrovanek; Katherine; DiGuilio; Robert; Bailey; William; Huntington; Ryan; Urbas; Barani; Mayilvaganan; Giancarlo; Mercogliano; James; M; Mullin

2014-01-01

This review is a current summary of the role that both zinc deficiency and zinc supplementation can play in the etiology and therapy of a wide range of gastrointestinal diseases. The recent literature describing zinc action on gastrointestinal epithelial tight junctions and epithelial barrier function is described. Zinc enhancement of gastrointestinal epithelial barrier function may figure prominently in its potential therapeutic action in several gastrointestinal diseases.

Polish Phoneme Statistics Obtained On Large Set Of Written Texts

Directory of Open Access Journals (Sweden)

Bartosz Ziółko

2009-01-01

Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

Polishing compound for plastic surfaces

Science.gov (United States)

Stowell, M.S.

1991-01-01

This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

A roentgenologic study of diverticular throughout the entire gastrointestinal tract

International Nuclear Information System (INIS)

Sohn, Myung Hee; Song, Ho Young; Lim, Kyu Yeob

1983-01-01

Diverticulum is considered as a common lesion involving any gastrointestinal tract from the pharynx to the rectum. We reviewed 5,806 cases of upper G-I series and 801 cases of double contrast barium enema during the period from Jan.1978 to Dec. 1981 in the Department of Radiology, School of Medicine, Jeonbug National University Hospital to analyze diverticula of the entire gastrointestinal tract. The results were as follows: 1. Roentgen examination of 5,806 esophagus, stomachs, duodenums and small bowels, and 801 colons during the past four years: diverticula of the esophagus, 60 cases (1.0%); diverticula of the stomach, 42 cases (0.7%); diverticula of the duodenum, 358 cases (6.2%); diverticula of the small bowel, 20 cases (0.3%); diverticula of the colon, 26 cases (3.2%). The location of diverticula in order of frequency was duodenum, colon, esophagus, stomach and small bowel. 2. The most common site of diverticula of each gastrointestinal tract was as follows: diverticula of the esophagus, middle portion (84.7%); diverticula of the stomach, the cardia (59.5%); diverticula of the duodenum, the second portion (81.3%); diverticula of the small bowel, the jejunum (96.4%)-especially the larger percentage were observed at the upper jejunum near the ligament of Treitz; diverticula of the colon, the right sided colon (80.8%)-the cecum and ascending colon (57.1%). 3. Diverticula may occur at any age. The majority of diverticula of the entire gastrointestinal tract were observed over 40 years of age. Especially in diverticula of the duodenum and colon, their frequency increase with age. 4. Duodenal diverticula were observed more frequently in woman than in man but in diverticula of the esophagus, stomach, small bowel and colon, male was more frequently affected. 5. The size of diverticula of the entire gastrointestinal tract was variable. The majority of diverticula of the esophagus, stomach, duodenum and small bowel were intermediate in size (10-49 mm). Diverticula of

Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

Science.gov (United States)

Dunn, Christina R; Walker, David D

2008-11-10

In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

Phonematic translation of Polish texts by the neural network

International Nuclear Information System (INIS)

Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

1996-01-01

Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

Radiologic features of injuries from the Boston Marathon bombing at three hospitals.

Science.gov (United States)

Singh, Ajay K; Goralnick, Eric; Velmahos, George; Biddinger, Paul D; Gates, Jonathan; Sodickson, Aaron

2014-08-01

The aim of this study is to describe the radiologic imaging findings of primary, secondary, tertiary, and quaternary blast injuries in patients injured in the Boston Marathon bombing on April 15, 2013. A total of 43 patients presenting to three acute care hospitals and undergoing radiologic investigation within 7 hours of the time of the bombing on April 15, 2013, were included in this study. The radiographic and CT features of these patients were evaluated for imaging findings consistent with primary, secondary, tertiary, and quaternary blast injury. There were no pulmonary or gastrointestinal manifestations of the primary blast wave on imaging. Secondary blast injuries identified on imaging included a total of 189 shrapnel fragments identified in 32 of the 43 patients. The shrapnel was identified most often in the soft tissues of the leg (36.5%), thigh (31.2%), and pelvis (13.2%). Imaging identified 125 ball bearings, 10 nails, one screw, 44 metal fragments, and nine other (gravel, glass, etc.) foreign bodies. Injuries from the Boston Marathon bombing were predominantly from the secondary blast wave and resulted in traumatic injuries predominantly of the lower extremities. The most common shrapnel found on radiologic evaluation was the ball bearing.

Tribological approach to study polishing of road surface under traffic

OpenAIRE

KANE, Malal; DO, Minh Tan

2007-01-01

The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

The place of polish in the multilingual space of the European Union

Directory of Open Access Journals (Sweden)

T. I. Neprytska

2015-03-01

Full Text Available The article studies the position of the Polish language in the multilingual space of the European Union and determines the key factors which facilitate its gaining popularity and spreading in Europe. A large territory and population determine the significant presence of Polish in the European Union. Intense economic development facilitates popularization of learning and using Polish in the business medium, however, English was and still remains the dominating language of business. Active work of the state on improving the reputation of the country abroad, civilizational (value­based unity with other nations of the EU, favorable geographical position, common Indo­European roots of Germanic, Romanic and Slavonic  languages as well as usage of the Latin type create favorable conditions for the development and popularization of Polish on the territory of the EU. The article also mentions a number of concerns, which are rooted in the historical past of a dependent or semi­dependent existence of the Polish people, namely, the existence of the Polish and culture in the shade of German and Russian culture space, the negative international image of modern Poland, which was formed at the beginning of the 1990­s, the low level of Europeans’ familiarization with the Polish culture, absence of popularity and economic necessity of learning Polish abroad.

Barium sulphate preparations for use in double contrast examination of the upper gastrointestinal tract

International Nuclear Information System (INIS)

Anderson, W.; Harthill, J.E.; James, W.B.; Montgomery, D.

1980-01-01

Physical properties relevant to upper gastrointestinal radiology have been compared for five barium sulphate preparations and related to radiographic results. Evaluation of particles (size and stability) and whole suspension (dispersibility and fluidity) resulted in ranking of the preparations generally in accord with that based on radiological experience in double contrast examinations of the stomach. Experiments with extirpated pig stomach revealed a tendency for large particles in a low viscosity barium sulphate suspension to settle in mucosal grooves. This is believed to contribute to good radiographic definition of both the areae gastricae and small lesions. Particle size is therefore important and susceptibility to flocculation, a possible cause of random change in size during use, was assessed by measuring particle electrophoretic mobility under varying conditions; quantitative differences in suspension flow and dispersibility were also demonstrated. Fluidity and dispersibility together with rapid sedimentation of suitably sized particles resistant to flocculation underlie the successful use of low viscosity high density barium sulphate suspensions. (U.K.)

Research on high-efficiency polishing technology of photomask substrate

Science.gov (United States)

Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

2018-03-01

A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

Forming a health culture of future teachers in Polish educational establishments

Directory of Open Access Journals (Sweden)

T.S. IERMAKOVA

2014-10-01

Full Text Available Aim: to study the experience of the structure and system of training of future teachers in Polish schools. Material: content analysis of domestic and foreign authors. Used data from the survey of students of Polish universities. Also were used survey results through polish service ANKIETKA. For comparison, a questionnaire survey 35 students of the Faculty of Physical Education (future teachers of physical training and 30 students - the future teachers of elementary school of Ukrainian university. Results: the study of Polish teachers consider health culture of a person as the ability to assess individual and community health needs using in everyday life hygiene and health regulations. There have been some differences among Ukrainian and Polish students in their health and health culture. Among the respondents, Polish students - the future teachers of physical culture, is dominated motives such as the improvement of the physical condition, strengthen self-esteem, as well as improved health. Polish students from other disciplines believe that the most important motive for the adoption of physical activity is a concern for the physical well-being and mental health. The majority of Ukrainian students (future teachers of physical culture believe an important part of building health culture of their direct participation in various sports clubs, as well as the ability to organize physical culture, sports and educational work with students outside the classroom. Ukrainian students (other specialty noted the need to improve health, enhance knowledge in specific subjects humanities and promoting healthy lifestyles. Conclusions: It is recommended to use the experience of preparing students of Polish schools in modern Ukrainian higher education.

Confocal Raman spectrocopy for the analysis of nail polish evidence.

Science.gov (United States)

López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

2015-06-01

Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

Novel ceria-polymer microcomposites for chemical mechanical polishing

International Nuclear Information System (INIS)

Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

2008-01-01

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

Novel ceria-polymer microcomposites for chemical mechanical polishing

Energy Technology Data Exchange (ETDEWEB)

Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

2008-12-30

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

Jewish problem in the Polish Communist Party

Directory of Open Access Journals (Sweden)

Cimek Henryk

2016-12-01

Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

Borel hierarchies in infinite products of Polish spaces

Indian Academy of Sciences (India)

with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

Directory of Open Access Journals (Sweden)

X. Wei

2012-01-01

Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

Angiography and the gastrointestinal bleeder

International Nuclear Information System (INIS)

Baum, S.

1982-01-01

The role of angiography in the diagnosis and treatment of gastrointestinal hemorrhage is discussed. Three categories of gastrointestinal bleeding are considered: upper gastrointestinal bleeding due to gastroesophageal varices, upper gastrointestinal bleeding of arterial or capillary origin, and lower gastrointestinal bleeding. The advantages and disadvantages of angiography are compared with those of radionuclide scanning and endoscopy or colonoscopy. It is anticipated that, as radionuclide scans are more widely employed, angiography will eventually be performed only in those patients with positive scans

Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

Directory of Open Access Journals (Sweden)

Cynthia Sumali

2013-07-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

Angiographic diagnosis and treatment of gastrointestinal bleeding

International Nuclear Information System (INIS)

Park, Jae Hyung; Sung, Kyu Bo; Koo, Kyung Hoi; Bae, Tae Young; Chung, Eun Chul; Han, Man Chung

1986-01-01

Diagnostic angiographic evaluations were done in 33 patients with gastrointestinal bleeding for recent 5 years at Department of Radiology, Seoul National University Hospital. On 11 patients of them, therapeutic interventional procedures were made and the results were analysed. 1. In a total of 33 cases, there were 18 cases of upper GI bleeding and 15 cases of lower GI bleeding. The most frequent causes were peptic ulcer in the former and intestinal typhoid fever in the latter. 2. Bleeding sites were localized angiographically in 28 cases, so the detection rate was 85%. Four of the five angiographically negative cases were lower GI bleeding cases. 3. The most frequent bleeding site was left gastric artery (7/33). The next was ileocecal branch of superior mesenteric artery (6/33). 4. Among the 11 interventional procedures, Gelfoam embolization was done in 7 cases and Vasopressin infusion was tried in 4 cases. They were successful in 4 and 3 cases, suggesting 57% and 47% success rates respectively.

Angiographic diagnosis and treatment of gastrointestinal bleeding

Energy Technology Data Exchange (ETDEWEB)

Park, Jae Hyung; Sung, Kyu Bo; Koo, Kyung Hoi; Bae, Tae Young; Chung, Eun Chul; Han, Man Chung [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1986-02-15

Diagnostic angiographic evaluations were done in 33 patients with gastrointestinal bleeding for recent 5 years at Department of Radiology, Seoul National University Hospital. On 11 patients of them, therapeutic interventional procedures were made and the results were analysed. 1. In a total of 33 cases, there were 18 cases of upper GI bleeding and 15 cases of lower GI bleeding. The most frequent causes were peptic ulcer in the former and intestinal typhoid fever in the latter. 2. Bleeding sites were localized angiographically in 28 cases, so the detection rate was 85%. Four of the five angiographically negative cases were lower GI bleeding cases. 3. The most frequent bleeding site was left gastric artery (7/33). The next was ileocecal branch of superior mesenteric artery (6/33). 4. Among the 11 interventional procedures, Gelfoam embolization was done in 7 cases and Vasopressin infusion was tried in 4 cases. They were successful in 4 and 3 cases, suggesting 57% and 47% success rates respectively.

Upper Gastrointestinal Complications and Cardiovascular/Gastrointestinal Risk Calculator in Patients with Myocardial Infarction Treated with Aspirin.

Science.gov (United States)

Wen, Lei

2017-08-20

Aspirin is widely used for the prevention of cardiovascular and cerebrovascular diseases for the past few years. However, much attention has been paid to the adverse effects associated with aspirin such as gastrointestinal bleeding. How to weigh the benefits and hazards? The current study aimed to assess the feasibility of a cardiovascular/gastrointestinal risk calculator, AsaRiskCalculator, in predicting gastrointestinal events in Chinese patients with myocardial infarction (MI), determining unique risk factor(s) for gastrointestinal events to be considered in the calculator. The MI patients who visited Shapingba District People's Hospital between January 2012 and January 2016 were retrospectively reviewed. Based on gastroscopic data, the patients were divided into two groups: gastrointestinal and nongastrointestinal groups. Demographic and clinical data of the patients were then retrieved for statistical analysis. Univariate and multiple logistic regression analyses were used to identify independent risk factors for gastrointestinal events. The receiver operating characteristic (ROC) curves were used to assess the predictive value of AsaRiskCalculator for gastrointestinal events. A total of 400 MI patients meeting the eligibility criteria were analyzed, including 94 and 306 in the gastrointestinal and nongastrointestinal groups, respectively. The data showed that age, male gender, predicted gastrointestinal events, and Helicobacter pylori (HP) infection were positively correlated with gastrointestinal events. In multiple logistic regression analysis, predicted gastrointestinal events and HP infection were identified as risk factors for actual gastrointestinal events. HP infection was highly predictive in Chinese patients; the ROC curve indicated an area under the curve of 0.822 (95% confidence interval: 0.774-0.870). The best diagnostic cutoff point of predicted gastrointestinal events was 68.0‰, yielding sensitivity and specificity of 60.6% and 93

The current status of interventional radiology in Canada: results of a survey by the Canadian Interventional Radiology Association

Energy Technology Data Exchange (ETDEWEB)

Millward, S.F.; Holley, M.L. [Univ. of Western Ontario, London Health Sciences Centre, Dept. of Radiology, London, Ontario (Canada)

2001-04-01

To evaluate the current status of interventional radiology in Canada. A questionnaire was sent to 28 Canadian interventional radiologists (defined as a physician who performs any type of interventional procedure, including biopsies, but excluding interventional neuroradiology) practising in both tertiary and community hospitals in the major centres in all provinces except Prince Edward Island. Twenty-two (79%) of 28 surveys were completed and returned, providing data about 86 interventional radiologists (IRs). IRs were performing almost all of the following procedures at their institutions: inferior vena cava filter placement, venous angioplasty, dialysis fistula angioplasty, diagnostic and therapeutic pulmonary and bronchial artery procedures, diagnostic and therapeutic procedures of the lower extremity and renal arteries, percutaneous abscess and biliary drainage procedures, percutaneous nephrostomy, and fibroid embolization. A second group of procedures, performed by both IRs and non-radiologists in most institutions, included: all types of central venous catheter placements, pleural drainage, and gastrostomy tube placement. Procedures not being performed by anyone in a number of institutions included: dialysis graft thrombolysis, varicocele embolization, transjugular intrahepatic portosystemic shunts, palliative stenting of the gastrointestinal tract, fallopian tube recannalization, and liver and prostate tumour treatments. The factors most often limiting the respondents' ability to provide a comprehensive interventional service were the interventional radiology inventory budget and the availability of interventional radiology rooms; 50% of respondents indicated the number of available nurses, technologists and IRs was also an important limiting factor. IRs in Canada still play a major role in many of the most commonly performed procedures. However, limited availability of resources and personnel in many institutions may be hampering the ability of IRs to

The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

OpenAIRE

Bubnys, Arūnas

2006-01-01

The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

Costs of Medically Attended Acute Gastrointestinal Infections: The Polish Prospective Healthcare Utilization Survey.

Science.gov (United States)

Czech, Marcin; Rosinska, Magdalena; Rogalska, Justyna; Staszewska, Ewa; Stefanoff, Pawel

The burden of acute gastrointestinal infections (AGIs) on the society has not been well studied in Central European countries, which prevents the implementation of effective, targeted public health interventions. We investigated patients of 11 randomly selected general practices and 8 hospital units. Each patient meeting the international AGI case definition criteria was interviewed on costs incurred related to the use of health care resources. Follow-up interview with consenting patients was conducted 2 to 4 weeks after the general practitioner (GP) visit or discharge from hospital, collecting information on self-medication costs and indirect costs. Costs were recalculated to US dollars by using the purchasing power parity exchange rate for Poland. Weighting the inpatient costs by age-specific probability of hospital referral by GPs, the societal cost of a medically attended AGI case was estimated to be US $168. The main cost drivers of direct medical costs were cost of hospital bed days (US $28), cost of outpatient pharmacotherapy (US $20), and cost of GP consultation (US $10). Patients covered only the cost of outpatient pharmacotherapy. Considering the AGI population GP consultation rate, the age-adjusted societal cost of medically attended AGI episodes was estimated at US $2222 million, of which 53% was attributable to indirect costs. Even though AGIs generate a low cost for individuals, they place a high burden on the society, attributed mostly to indirect costs. Higher resources could be allocated to the prevention and control of AGIs. Copyright © 2013, International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc.

Experimental Study on Layered Ice Bonded Abrasive Polishing of Glass-ceramics

Directory of Open Access Journals (Sweden)

Yuli SUN

2014-12-01

Full Text Available Layered ice bonded abrasive tools (LIBAT is a new kind of one which not only has the ability of lapping and polishing but also has the effect of self-dressing. In this paper, two kinds of layered ice bonded abrasive tools were designed and manufactured. Experimental studies on layered ice bonded abrasive (LIBA polishing of glass-ceramics were conducted. The results show that the surface topography of glass-ceramics polished by micro α-Al2O3-nano α-Al2O3 LIBAT is better than that of polished by micro α-Al2O3-nano SiO2 LIBAT. The surface roughness Sa of glass-ceramics polished by the two kinds of LIBAT is at the nanometer scale. The reasons of this phenomenon were analyzed. The experimental results illustrate that the LIBAT shows good effect and can be used in production practice. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6149

Energy savings in Polish buildings

Energy Technology Data Exchange (ETDEWEB)

Markel, L.C.; Gula, A.; Reeves, G.

1995-12-31

A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

Pediatric radiology for medical-technical radiology assistants/radiologists

International Nuclear Information System (INIS)

Oppelt, Birgit

2010-01-01

The book on pediatric radiology includes the following chapter: differences between adults and children; psycho-social aspects concerning the patient child in radiology; relevant radiation doses in radiology; help for self-help: simple phantoms for image quality estimation in pediatric radiology; general information; immobilization of the patient; pediatric features for radiological settings; traumatology; contrast agents; biomedical radiography; computerized tomography; NMR imaging; diagnostic ultrasonography; handling of stress practical recommendations; medical displays.

Nd:YOV4 laser polishing on WC-Co HVOF coating

Science.gov (United States)

Giorleo, L.; Ceretti, E.; Montesano, L.; La Vecchia, G. M.

2017-10-01

WC/Co coatings are widely applied to different types of components due to their extraordinary performance properties including high hardness and wear properties. In industrial applications High Velocity Oxy-Fuel (HVOF) technique is extensively used to deposit hard metal coatings. The main advantage of HVOF compared to other thermal spray techniques is the ability to accelerate the melted powder particles of the feedstock material at a relatively high velocity, leading to obtain good adhesion and low porosity level. However, despite the mentioned benefits, the surface finish quality of WC-Co HVOF coatings results to be poor (Ra higher than 5 µm) thus a mechanical polishing process is often needed. The main problem is that the high hardness of coating leads the polishing process expensive in terms of time and tool wear; moreover polishing becomes difficult and not always possible in case of limited accessibility of a part, micro dimensions or undercuts. Nowadays a different technique available to improve surface roughness is the laser polishing process. The polishing principle is based on focused radiation of a laser beam that melts a microscopic layer of surface material. Compared to conventional polishing process (as grinding) it ensures the possibility of avoiding tool wear, less pollution (no abrasive or liquids), no debris, less machining time and coupled with a galvo system it results to be more suitable in case of 3D complex workpieces. In this paper laser polishing process executed with a Nd:YOV4 Laser was investigated: the effect of different process parameters as initial coating morphology, laser scan speed and loop cycles were tested. Results were compared by a statistical approach in terms of average roughness along with a morphological analysis carried out by Scanning Electron Microscope (SEM) investigation coupled with EDS spectra.

Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

International Nuclear Information System (INIS)

Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

2014-01-01

In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

Calculation and simulation on mid-spatial frequency error in continuous polishing

International Nuclear Information System (INIS)

Xie Lei; Zhang Yunfan; You Yunfeng; Ma Ping; Liu Yibin; Yan Dingyao

2013-01-01

Based on theoretical model of continuous polishing, the influence of processing parameters on the polishing result was discussed. Possible causes of mid-spatial frequency error in the process were analyzed. The simulation results demonstrated that the low spatial frequency error was mainly caused by large rotating ratio. The mid-spatial frequency error would decrease as the low spatial frequency error became lower. The regular groove shape was the primary reason of the mid-spatial frequency error. When irregular and fitful grooves were adopted, the mid-spatial frequency error could be lessened. Moreover, the workpiece swing could make the polishing process more uniform and reduce the mid-spatial frequency error caused by the fix-eccentric plane polishing. (authors)

Surface morphology changes of acrylic resins during finishing and polishing phases

Directory of Open Access Journals (Sweden)

Glaucio Serra

2013-12-01

Full Text Available INTRODUCTION: The finishing and polishing phases are essential to improve smoothness and shining on the surface of acrylic resins used to make removable orthodontic appliances. A good surface finishing reduces roughness, which facilitates hygiene, prevents staining and provides greater comfort to the patients. OBJECTIVE: The aim of this paper was to analyze the changes on surface morphology of acrylic resins during finishing and polishing phases. METHODS: Thirty discs (10 mm in diameter and 5 mm in length were made with acrylic resin and randomly divided into ten groups. The control group did not receive any treatment while the other groups received gradual finishing and polishing. The last group received the entire finishing and polishing procedures. Surface morphology was qualitatively analyzed through scanning electron microscopy and quantitatively analyzed through a laser profilometer test. RESULTS: The acrylic resin surfaces without treatment showed bubbles which were not observed in the subsequent phases. Wearing out with multilaminated burs, finishing with wood sandpaper and finishing with water sandpaper resulted in surfaces with decreasing irregularities. The surfaces that were polished with pumice and with low abrasive liquids showed high superficial smoothness. CONCLUSION: Highly smooth acrylic resin surfaces can be obtained after mechanical finishing and polishing performed with multilaminated burs, wood sandpaper, water sandpaper, pumice and low abrasive liquids.

Implementation of the Bulgarian-Polish online dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

Lay beliefs on Polish oncology in the evaluation of healthy individuals.

Science.gov (United States)

Synowiec-Piłat, Małgorzata

2017-12-23

Poland is among the countries which reported the highest rates of mortality from cancer. The health behaviours of people are influenced, among other things, by their beliefs about cancer, but their evaluation of oncological institutions and specialists seems also to be of great importance. Objectives. 1. How the respondents evaluate Polish oncology: a) the conditions of treatment in oncology hospitals, b) access to oncological medical services, c) the competence of oncologists. 2. What are the socio-cultural factors of the assessment of Polish oncology? 3. What is the influence of the grade level of the assessment of Polish oncology on the degree of fear and the knowledge about cancer? The study was carried out with a sample of 910 adult residents of Wroclaw in south-west Poland. Quota sampling was used. An interview questionnaire was used as the method. Analysis of the data showed a negative image of Polish oncology, according to the study participants: dissatisfaction with both treatment conditions and with access to medical services. Assessment of Polish oncology depends primarily on education, age and economic situation, as well as 'family history of cancer', and attitude towards doctors. The lower the rating of Polish oncology, the lower the medical knowledge, and the higher the level of fear of cancer. Negative assessment of Polish oncology perpetuates the fear of cancer in society. There is a need for constant improvement of the quality of medical oncology services, for building public trust in physicians, to fight inequalities in health, and to take into account the lay perspectives in developing strategies to combat cancer.

Evaluation of scoring models for identifying the need for therapeutic intervention of upper gastrointestinal bleeding: A new prediction score model for Japanese patients.

Science.gov (United States)

Iino, Chikara; Mikami, Tatsuya; Igarashi, Takasato; Aihara, Tomoyuki; Ishii, Kentaro; Sakamoto, Jyuichi; Tono, Hiroshi; Fukuda, Shinsaku

2016-11-01

Multiple scoring systems have been developed to predict outcomes in patients with upper gastrointestinal bleeding. We determined how well these and a newly established scoring model predict the need for therapeutic intervention, excluding transfusion, in Japanese patients with upper gastrointestinal bleeding. We reviewed data from 212 consecutive patients with upper gastrointestinal bleeding. Patients requiring endoscopic intervention, operation, or interventional radiology were allocated to the therapeutic intervention group. Firstly, we compared areas under the curve for the Glasgow-Blatchford, Clinical Rockall, and AIMS65 scores. Secondly, the scores and factors likely associated with upper gastrointestinal bleeding were analyzed with a logistic regression analysis to form a new scoring model. Thirdly, the new model and the existing model were investigated to evaluate their usefulness. Therapeutic intervention was required in 109 patients (51.4%). The Glasgow-Blatchford score was superior to both the Clinical Rockall and AIMS65 scores for predicting therapeutic intervention need (area under the curve, 0.75 [95% confidence interval, 0.69-0.81] vs 0.53 [0.46-0.61] and 0.52 [0.44-0.60], respectively). Multivariate logistic regression analysis retained seven significant predictors in the model: systolic blood pressure upper gastrointestinal bleeding. © 2016 Japan Gastroenterological Endoscopy Society.

The Profile of a Polish Mutual Fund Manager

Directory of Open Access Journals (Sweden)

Dariusz Filip

2018-05-01

Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

[Lysenkoism in Polish botany].

Science.gov (United States)

Köhler, Piotr

2008-01-01

Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

Condensate polishing guidelines for PWR and BWR plants

International Nuclear Information System (INIS)

Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

1993-03-01

Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

Science.gov (United States)

Stein, David

This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

Science.gov (United States)

Peethala, Brown Cornelius

Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

Radiological Worker Training: Radiological Worker 2 study guides

International Nuclear Information System (INIS)

1992-10-01

Upon completion of this training course, the participant will have the knowledge to work safely in areas controlled for radiological purposes using proper radiological practices. Radiological Worker H Training, for the worker whose job assignment involves entry into Radiological Buffer Areas and all types of Radiation Contamination and Airborne Radioactivity Areas. This course is designed to prepare the worker to work safely in and around radiological areas and present methods to use to ensure individual radiation exposure is maintained As Low As Reasonably Achievable

Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

Science.gov (United States)

Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

2016-01-01

This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

Microscopic machining mechanism of polishing based on vibrations of liquid

International Nuclear Information System (INIS)

Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

2007-01-01

A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

Radiological clerkships as a critical curriculum component in radiology education

International Nuclear Information System (INIS)

Kourdioukova, Elena V.; Verstraete, Koenraad L.; Valcke, Martin

2011-01-01

Objective: The aim of this research was to explore the perceived value of clinical clerkships in the radiology curriculum as well as the impact of radiology clerkship on students' beliefs about the profession of radiology as a whole and as a career. Methods: This study is a sequel to a previous survey in which student perceptions about radiology curriculum components were investigated. The present study focuses on a further analysis of a subsection in this study, based on 14 statements about radiology clerkship and two statements about radiology as a career. Results: Perceived usefulness of the aspects of radiology clerkship as 'radiology examination', 'skills development' and 'diagnosis focus' were awarded the highest scores. The predict value of the subscale 'radiology examination' on the level of performance was very high (adjusted R 2 = 0.19, p < .001). Conclusion: Students expressed highly favorable evaluation of clerkship as a learning environment to learn to order and to interpret imaging studies as well as an unique possibility to attend various radiological examinations and to access to specific radiology software systems, as well as to get a better view on radiology and to improve image interpretation skills. This positive attitude towards clerkship is closely tied to students' beliefs about the profession of radiology as a whole. These aspects of dedicated radiology clerkship are crucial for effective and high-quality education as well as for the choice of radiology as a career.

Models of nanoparticles movement, collision, and friction in chemical mechanical polishing (CMP)

Energy Technology Data Exchange (ETDEWEB)

Ilie, Filip, E-mail: filip@meca.omtr.pub.ro [Polytechnic University of Bucharest, Department of Machine Elements and Tribology (Romania)

2012-03-15

Nanoparticles have been widely used in polishing slurry such as chemical mechanical polishing (CMP) process. The movement of nanoparticles in polishing slurry and the interaction between nanoparticles and solid surface are very important to obtain an atomic smooth surface in CMP process. Polishing slurry contains abrasive nanoparticles (with the size range of about 10-100 nm) and chemical reagents. Abrasive nanoparticles and hydrodynamic pressure are considered to cause the polishing effect. Nanoparticles behavior in the slurry with power-law viscosity shows great effect on the wafer surface in polishing process. CMP is now a standard process of integrated circuit manufacturing at nanoscale. Various models can dynamically predict the evolution of surface topography for any time point during CMP. To research, using a combination of individual nanoscale friction measurements for CMP of SiO{sub 2}, in an analytical model, to sum these effects, and the results scale CMP experiments, can guide the research and validate the model. CMP endpoint measurements, such as those from motor current traces, enable verification of model predictions, relating to friction and wear in CMP and surface topography evolution for different types of CMP processes and patterned chips. In this article, we explore models of the microscopic frictional force based on the surface topography and present both experimental and theoretical studies on the movement of nanoparticles in polishing slurry and collision between nanoparticles, as well as between the particles and solid surfaces in time of process CMP. Experimental results have proved that the nanoparticle size and slurry properties have great effects on the polishing results. The effects of the nanoparticle size and the slurry film thickness are also discussed.

Toxocariasis masquerading as liver and lung metastatic nodules in patents with gastrointestinal cancer: clinicopathologic study of five cases.

Science.gov (United States)

Park, Sanghui; Kim, Yun Soo; Kim, Yu Jin; Kyung, Sun Young; Park, Jeong-Woong; Jeong, Sung Hwan; Lee, Sang Pyo

2012-01-01

There are sporadic reports in the literature in which radiologic liver and lung lesions found incidentally during follow-up metastatic surveillance were shown to be caused by toxocariasis. The objective of the work discussed in this report was to identify common clinical and histopathological features of toxocariasis resembling metastatic nodules in five patients with gastrointestinal cancer. We retrospectively analyzed clinical features of five gastrointestinal cancer patients with liver or lung nodules mimicking metastasis. Serologic tests for parasitic infestations and pathologic examinations were performed. All five patients were males and three patients had gastric cancer and two had colorectal cancer. All the cases of toxocariasis were confirmed serologically. On follow-up imaging, the lesions improved or resolved, suggestive of the phenomenon of visceral larva migrans. In two patients, liver biopsy was performed and showed eosinophilic abscess. Serologic tests and liver or lung biopsy should be performed aggressively to exclude toxocariasis when patients with underlying gastrointestinal cancer present with hepatic or pulmonary nodules associated with eosinophilia, particularly if the patients have a clinical history of raw animal liver ingestion. Curative surgical intervention should not be excluded just because of multiple nodules in the liver or the lungs.

Antioxidant supplements for preventing gastrointestinal cancers

DEFF Research Database (Denmark)

Bjelakovic, G; Nikolova, D; Simonetti, R G

2004-01-01

Oxidative stress may cause gastrointestinal cancers. The evidence on whether antioxidant supplements are effective in preventing gastrointestinal cancers is contradictory.......Oxidative stress may cause gastrointestinal cancers. The evidence on whether antioxidant supplements are effective in preventing gastrointestinal cancers is contradictory....

Effects of air-polishing powders on color stability of composite resins.

Science.gov (United States)

Güler, Ahmet Umut; Duran, Ibrahim; Yücel, Ali Çağin; Ozkan, Pelin

2011-10-01

The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing

Effects of air-polishing powders on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2011-10-01

Full Text Available OBJECTIVES: The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS: Thirty cylindrical specimens (15×2 mm were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex. The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder. A standard air-polishing unit (ProSmile Handly was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300. Color differences (∆E* between the 2 color measurements (baseline and after 24 h storage were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05 and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. CONCLUSION: Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7. Air-polishing applications increased the color change for all composite resin restorative materials

Material removal mechanisms in electrochemical-mechanical polishing of tantalum

International Nuclear Information System (INIS)

Gao, F.; Liang, H.

2009-01-01

Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

[Polish medical ethics in the period 1945-1980].

Science.gov (United States)

Wichrowski, Marek

2003-01-01

The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

Scintigraphic evaluation of gastrointestinal motility disorders

Energy Technology Data Exchange (ETDEWEB)

Choe, Jae Gol [College of Medicine, Korea Univ., Seoul (Korea, Republic of)

2001-02-01

Current scintigraphic tests of gastrointestinal motor function provides relevant pathophysiologic information, but their clinical utility is controversial. Many scintigraphic methods are developed to investigate gastrointestinal motility from oral cavity to colon. These are esophageal transit scintigraphy, oropharyngeal transit study, gastric emptying test, small bowel transit time measurement, colon transit study and gastroesopahgeal reflux scintigraphy. Scintigraphy of gastrointestinal tract is the most physiologic and noninvasive method to evaluate gastrointestinal motility disorders. Stomach emptying test is regarded as a gold standard in motility study. Gastrointestinal transit scintigraphy also has a certain role in assessment of drug effect to GI motility and changes after theraphy of motility disorders. Scintigraphy provides noninvasive and quantitative assessment of physiological transit throughout the gastrointestinal tract, and it is extremely useful for diagnosing gastrointestinal motor dysfunction. This article reviews the current procedures, indications, significance and guidelines for gastrointestinal motility measurements by scintigraphy.

Scintigraphic evaluation of gastrointestinal motility disorders

International Nuclear Information System (INIS)

Choe, Jae Gol

2001-01-01

Current scintigraphic tests of gastrointestinal motor function provides relevant pathophysiologic information, but their clinical utility is controversial. Many scintigraphic methods are developed to investigate gastrointestinal motility from oral cavity to colon. These are esophageal transit scintigraphy, oropharyngeal transit study, gastric emptying test, small bowel transit time measurement, colon transit study and gastroesopahgeal reflux scintigraphy. Scintigraphy of gastrointestinal tract is the most physiologic and noninvasive method to evaluate gastrointestinal motility disorders. Stomach emptying test is regarded as a gold standard in motility study. Gastrointestinal transit scintigraphy also has a certain role in assessment of drug effect to GI motility and changes after theraphy of motility disorders. Scintigraphy provides noninvasive and quantitative assessment of physiological transit throughout the gastrointestinal tract, and it is extremely useful for diagnosing gastrointestinal motor dysfunction. This article reviews the current procedures, indications, significance and guidelines for gastrointestinal motility measurements by scintigraphy

[Massive hemorrhage of upper gastrointestinal tract caused by gastrointestinal stromal tumor of the stomach--case report].

Science.gov (United States)

Lalović, Nenad; Dukić Vladicić, Nikolina; Marić, Radmil; Cuk, Mirjana; Simatović, Milan; Jokanović, Dragana

2012-01-01

Acute bleeding from the upper gastrointestinal system is a medical emergency which is followed by high mortality rate, ranging from 6 to 15% in spite of modern diagnostic methods and treatment. Bleeding from the upper gastrointestinal system may be caused by gastrointestinal stromal tumors of the stomach, which are mainly characterized by occult bleeding, while profuse bleeding rarely occurs accompanied by hemorrhagic shock. Gastrointestinal stromal tumors of stomach are the most common mesenchimal tumors of the gastrointestinal tract. In our study we showed a 60-year-old female patient with profuse bleeding from the stomach and the clinical picture of severe hemorrhagic shock, caused by gastrointestinal stromal tumor. An ovoid junction, raised towards the lumen, covered with ulcerated mucosa in several places and followed by massive arterial bleeding was found intraoperatively, after the performed gastrotomy. Histopathological examination with immunohistochemical analysis confirmed that this was a gastrointestinal stromal tumor of the stomach. Acute bleeding from the digestive system is a sudden and serious condition of the body. Urgent esophagogastroduodenoscopy is a sensitive and specific diagnostic and therapeutic method of choice. Massive bleeding from the upper gastrointestinal tract is very rarely caused by gastrointestinal stromal tumors, whose clinical picture is very heterogeneous and depends on tumor size and location. Abundant bleeding from the tumor is an indication for urgent surgical intervention. According to the literature massive hemorrhage of the upper digestive system can rarely be caused by gastrointestinal stromal tumor of the stomach. It is shown that abundant hemorrhage of the upper digestive tract can be caused with gastric gastrointestinal stromal tumor. Surgical resection is the main form of treatment of gastrointestinal stromal tumors of the digestive system and bleeding from these tumors caused by failure of endoscopic hemostasis.

Polish adaptation of scoliosis research society-22 questionnaire.

Science.gov (United States)

Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

2009-05-01

Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

SAFETY PLATFORM OF POLISH TRANSPORT

Directory of Open Access Journals (Sweden)

Katarzyna CHRUZIK

2016-03-01

Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

Science.gov (United States)

Boaventura, Juliana Maria Capelozza; Nishida, Rodrigo; Elossais, André Afif; Lima, Darlon Martins; Reis, José Mauricio Santos Nunes; Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

2013-01-01

To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) RESULTS: All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic.

The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics

Science.gov (United States)

Demirci, Tevfik; Demirci, Gamze; Sagsoz, Nurdan Polat; Yildiz, Mehmet

2016-01-01

PURPOSE The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples (8 × 8 × 1 mm) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (α=.05). RESULTS The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (PCeramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics. PMID:28018558

High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes

Science.gov (United States)

Hernandez-Garcia, C.; Bullard, D.; Hannon, F.; Wang, Y.; Poelker, M.

2017-09-01

The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (˜11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

Studies on optimization of radiation protection for patients in diagnostic radiology

International Nuclear Information System (INIS)

Wei, Z.; Zhang, Q.; Li, W.; Li, K.; Wei, L.; Zong, X.; Qiang, Z.; Wu, Y.

1994-01-01

For the exposure of patients in diagnostic radiology, individual dose limit does not apply, but optimization of radiological protection may play a major role. This project has been carried out with the purpose of improving the protection of patients in medical diagnostic radiology in China utilizing the principles of optimization. Taking Sichuan, Shandong and Beijing as surveyed areas, we investigated the present situation of the protection of patients. In the survey, the patient doses were classified into practical dose, justified dose and optimized dose to evaluate the influences of managerial and equipment factors separately. The results show that there are some urgent protection problems in X-ray protection to be solved in the surveyed regions. This paper, however, points out that the prospects of reducing patient doses are encouraging provided that appropriate measures are adopted. For instance, taking proper managerial measures without radical change of existing equipments may reduce patient doses in chest fluoroscopy and radiography by 40% and 18% respectively; refitting some equipment may reduce the doses by 82.4% in chest fluoroscopy, 66% in chest radiography, and 80% in barium meal examination of the gastrointestinal (GI) tract. Using chest radiography instead of fluoroscopy supplemented by other protection measures may reduce the doses by 91.7%. Optimization analysis shows that adoption of the above measures conforms to the principle of optimization of radiation protection. (authors). 5 refs., 7 tabs

Polishing and toothbrushing alters the surface roughness and gloss of composite resins.

Science.gov (United States)

Kamonkhantikul, Krid; Arksornnukit, Mansuang; Takahashi, Hidekazu; Kanehira, Masafumi; Finger, Werner J

2014-01-01

This study aimed to investigate the surface roughness and gloss of composite resins after using two polishing systems and toothbrushing. Six composite resins (Durafill VS, Filtek Z250, Filtek Z350 XT, Kalore, Venus Diamond, and Venus Pearl) were evaluated after polishing with two polishing systems (Sof-Lex, Venus Supra) and after toothbrushing up to 40,000 cycles. Surface roughness (Ra) and gloss were determined for each composite resin group (n=6) after silicon carbide paper grinding, polishing, and toothbrushing. Two-way ANOVA indicated significant differences in both Ra and gloss between measuring stages for the composite resins tested, except Venus Pearl, which showed significant differences only in gloss. After polishing, the Filtek Z350 XT, Kalore, and Venus Diamond showed significant increases in Ra, while all composite resin groups except the Filtek Z350 XT and Durafill VS with Sof-Lex showed increases in gloss. After toothbrushing, all composite resin demonstrated increases in Ra and decreases in gloss.

Polish students at the Académie Julian until 1919

Directory of Open Access Journals (Sweden)

Zgórniak, Marek

2012-08-01

Full Text Available The subject of the article is the presence of Polish students in the most important private artistic school in Paris in the second half of the 19thcentury. The extant records regarding the atelier for male students made it possible to compile a list of about 165 Polish painters and sculptors studying there in the period from 1880 to 1919. The text presents the criteria used when preparing the list and the diagrams show the fluctuations in registration and the number of Polish artists in particular ateliers in successive years. The observations contained in the article have a summary nature and are illustrated only with selected examples.

Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary The paper discusses the presentation of neologisms in the recent version of the Bulgarian-Polish digital dictionary. We also continue the discussion of important problems related to the classifiers of the verbs as headwords of the digital dictionary entries. We analyze some examples from ongoing experimental version of the Bulgarian-Polish digital dictionary.

Gastrointestinal Headache; a Narrative Review

Directory of Open Access Journals (Sweden)

Majid T Noghani

2016-08-01

Full Text Available There are studies reporting primary headaches to be associated with gastrointestinal disorders, and some report resolution of headache following the treatment of the associated gastrointestinal disorder. Headache disorders are classified by The International Headache Society as primary or secondary; however, among the secondary headaches, those attributed to gastrointestinal disorders are not appreciated. Therefore, we aimed to review the literature to provide evidence for headaches, which originate from the gastrointestinal system. Gastrointestinal disorders that are reported to be associated with primary headaches include dyspepsia, gastro esophageal reflux disease (GERD, constipation, functional abdominal pain, inflammatory bowel syndrome (IBS, inflammatory bowel disorders (IBD, celiac disease, and helicobacter pylori (H. Pylori infection. Some studies have demonstrated remission or improvement of headache following the treatment of the accompanying gastrointestinal disorders. Hypotheses explaining this association are considered to be central sensitization and parasympathetic referred pain, serotonin pathways, autonomic nervous system dysfunction, systemic vasculopathy, and food allergy. Traditional Persian physicians, namely Ebn-e-Sina (Avicenna and Râzi (Rhazes believed in a type of headache originating from disorders of the stomach and named it as an individual entity, the "Participatory Headache of Gastric Origin". We suggest providing a unique diagnostic entity for headaches coexisting with any gastrointestinal abnormality that are improved or cured along with the treatment of the gastrointestinal disorder.

Current concepts in non-gastrointestinal stromal tumor soft tissue sarcomas: A primer for radiologists

Energy Technology Data Exchange (ETDEWEB)

Baheti, Akahay D. [Dept. of Radiology, Tata Memorial Centre, Mumbai (India); Tirumani, Harika [Dept. of Radiology, University of Arkansas for Medical Sciences, Little Rock (United States); O' Neill, Alibhe; Jagannathan, Jyothi P. [Dept. of Imaging, Dana-Farber Cancer Institute, Boston (United States)

2017-01-15

Non-gastrointestinal stromal tumor (GIST) soft tissue sarcomas (STSs) are a heterogeneous group of neoplasms whose classification and management continues to evolve with better understanding of their biologic behavior. The 2013 World Health Organization (WHO) has revised their classification based on new immunohistochemical and cytogenetic data. In this article, we will provide a brief overview of the revised WHO classification of soft tissue tumors, discuss in detail the radiology and management of the two most common adult non-GIST STS, namely liposarcoma and leiomyosarcoma, and review some of the emerging histology-driven targeted therapies in non-GIST STS, focusing on the role of the radiologist.

Current concepts in non-gastrointestinal stromal tumor soft tissue sarcomas: A primer for radiologists

International Nuclear Information System (INIS)

Baheti, Akahay D.; Tirumani, Harika; O'Neill, Alibhe; Jagannathan, Jyothi P.

2017-01-01

Non-gastrointestinal stromal tumor (GIST) soft tissue sarcomas (STSs) are a heterogeneous group of neoplasms whose classification and management continues to evolve with better understanding of their biologic behavior. The 2013 World Health Organization (WHO) has revised their classification based on new immunohistochemical and cytogenetic data. In this article, we will provide a brief overview of the revised WHO classification of soft tissue tumors, discuss in detail the radiology and management of the two most common adult non-GIST STS, namely liposarcoma and leiomyosarcoma, and review some of the emerging histology-driven targeted therapies in non-GIST STS, focusing on the role of the radiologist

Radiology fundamentals

CERN Document Server

Singh, Harjit

2011-01-01

""Radiology Fundamentals"" is a concise introduction to the dynamic field of radiology for medical students, non-radiology house staff, physician assistants, nurse practitioners, radiology assistants, and other allied health professionals. The goal of the book is to provide readers with general examples and brief discussions of basic radiographic principles and to serve as a curriculum guide, supplementing a radiology education and providing a solid foundation for further learning. Introductory chapters provide readers with the fundamental scientific concepts underlying the medical use of imag

Radiological signs of extra nodal abdominal involvements in lymphoma

International Nuclear Information System (INIS)

Carro, A.I.; Alegre, N.; Cervera, J.L.; Montero, A.I.

1998-01-01

To assess abdominal CT images in lymphoma patients for the study of extra nodal abdominal involvement. Ninety-two patients diagnosed as having lymphoma were studied retrospectively. All the patients underwent abdominopelvic CT with oral and intravenous contrast (except in one patient who was allergic). In every case, the diagnosis was confirmed by biopsy or radiological follow-up after treatment had been completed. Fifty-two patients (56.5%) presented infiltration of extra nodal organs. The organs most frequently involved were liver and spleen, followed by the gastrointestinal tract, the musculoskeletal system and the genitourinary tract. The findings in this study coincide with those reported elsewhere with the exception of the splenic involvement the incidence of which was lower in the present series. (Author) 17 refs

[A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

Science.gov (United States)

Kakaboura, A; Vougiouklakis, G; Argiri, G

1989-01-01

Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

Adaptation of the ORTHO-15 test to Polish women and men.

Science.gov (United States)

Brytek-Matera, Anna; Krupa, Magdalena; Poggiogalle, Eleonora; Donini, Lorenzo Maria

2014-03-01

There is a lack of Polish tools to measure behaviour related to orthorexia nervosa. The purpose of the present study was to validate the Polish version of the ORTHO-15 test. 341 women and 59 men (N = 400) were recruited, whose age ranged from 18 to 35 years. Mean age was 23.09 years (SD = 3.14) in women and 24.02 years (SD = 3.87) in men. The ORTHO-15 test and the EAT-26 test were used in the present study. Factor analysis (exploratory and confirmatory analysis) was used in the present study. Exploratory factor analysis performed on the initial 15 items from a random split half of the study group suggested a nine-item two-factor structure. Confirmatory factor analysis performed on the second randomly selected half of the study group supported this two-factor structure of the ORTHO-15 test. The Polish version of the ORTHO-15 test demonstrated an internal consistency (Cronbach's alpha) equal to 0.644. The Polish version of the ORTHO-15 test is a reliable and valuable instrument to assess obsessive attitudes related to healthy and proper nutrition in Polish female and male population.

Gloss and surface roughness produced by polishing kits on resin composites.

Science.gov (United States)

Sadidzadeh, Ramtin; Cakir, Deniz; Ramp, Lance C; Burgess, John O

2010-08-01

To compare in vitro the surface roughness (Ra) and gloss (G) produced by three conventional and one experimental polishing kits on four resin composites. 24 discs were prepared (d = 12 mm, t = 4 mm) for each resin composite: Filtek Supreme Plus Body/A2 (FSB), Yellow Translucent (FST), Heliomolar/A2 (HM), and EsthetX/A2 (EX) following the manufacturers' instructions. They were finished with 320 grit silicon carbide paper for 80 seconds each. Polishing systems: Sof-Lex, Enhance-Pogo, Astropol and Experimental Discs/EXL-695, were applied following manufacturers' instructions. Each specimen was ultrasonically cleaned with distilled water and dried. Gloss and Ra were measured with a small area glossmeter (Novo-curve) and non-contact profilometer (Proscan 2000) following ISO 4288, respectively. The results were evaluated by two-way ANOVA followed by separate one-way ANOVA and Tukey/Kramer test (P = 0.05). There was a significant interaction of surface roughness and gloss between the composites and polishing systems (P gloss was obtained for FSB composite polished with the Experimental kit. The experimental polishing system produced smoothest surfaces (P gloss (P < 0.05).

[Adhesion of oral microorganisms on dental porcelain polished and glazed].

Science.gov (United States)

Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

2003-09-01

This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

Electrochemical Polishing Applications and EIS of a Vitamin B4-Based Ionic Liquid

International Nuclear Information System (INIS)

Wixtrom, Alex I.; Buhler, Jessica E.; Reece, Charles E.; Abdel-Fattah, Tarek M.

2013-01-01

Modern particle accelerators require minimal interior surface roughness for Niobium superconducting radio frequency (SRF) cavities. Polishing of the Nb is currently achieved via electrochemical polishing with concentrated mixtures of sulfuric and hydrofluoric acids. This acid-based approach is effective at reducing the surface roughness to acceptable levels for SRF use, but due to acid-related hazards and extra costs (including safe disposal of used polishing solutions), an acid-free method would be preferable. This study focuses on an alternative electrochemical polishing method for Nb, using a novel ionic liquid solution containing choline chloride, also known as Vitamin B 4 (VB 4 ). Potentiostatic electrochemical impedance spectroscopy (EIS) was also performed on the VB4-based system. Nb polished using the VB4-based method was found to have a final surface roughness comparable to that achieved via the acid-based method, as assessed by atomic force microscopy (AFM). These findings indicate that acid-free VB 4 -based electrochemical polishing of Nb represents a promising replacement for acid-based methods of SRF cavity preparation

Time-dependent protection of ground and polished Cu using graphene film

International Nuclear Information System (INIS)

Dong, Yuhua; Liu, Qingqing; Zhou, Qiong

2015-01-01

Highlights: • Graphene was deposited on polished and ground Cu sheets by CVD. • Graphene films provide better protection to polished Cu for short time. • Multilayer graphene films provide better protection for short time. - Abstract: Graphene was deposited on Cu sheets with different morphologies by chemical vapor deposition. Scanning electron microscopy (SEM) analysis indicated that the morphology of the Cu sheet affected the graphene film properties. Electrochemical impedance spectroscopy measurements showed that the graphene film did not effectively protect Cu against corrosion because of prolonged exposure to ionic environments (3.5 wt.% NaCl solution). For short durations, graphene films provided better protection to polished Cu than ground Cu. Prolonged electrolyte immersion of graphene-coated Cu samples showed that the graphene film from the polished Cu surface was detached more easily than that from ground Cu

Effect of polishing time and pressure on quality characteristics of rice grain

International Nuclear Information System (INIS)

Karim, M.A.

2002-01-01

Since totally unpolished rice has poor cooking quality, a certain amount of polishing for the removal of the outermost bran layers is essential. To determine the best combination of polishing time and pressure with respect to obtaining optimum quantity/quality, the brown rice (head grains) of a rice strain 4048 was milled for 10, 20, 30 and 40 seconds against 1,2,3,4 and 5 lbs pressure in a Burrows McGill Polisher No. 3. the quality characteristics studied were: total milling recovery, head rice recovery, whiteness of milled rice, protein content of grain, grain length and bursting upon cooking. Both, total milled rice and head rice reduced while the whiteness of milled rice improved significantly with an increase in polishing time and or pressure. The protein content decreased gradually with an increase in time and pressure of milling but the effect was non significant. The cooked grain length increased with an increase in milling degree up to a stage, beyond which it declined. The increase in bursting of grains on cooking. A combination of 20 seconds polishing time with 2 lbs pressure or 20 seconds polishing time with 3 lbs pressure was found to be the best combination of obtaining the optimum quality as well as the quality of milled rice.(author)

Poul Erik Andersen's radiological work on Osteochondrodysplasias and interventional radiology

DEFF Research Database (Denmark)

Andersen, Poul Erik

2011-01-01

Hospital. His significant experience and extensive scientific work has led to many posts in the Danish Society of Interventional Radiology, the European Society of Radiology and the Cardiovascular and Interventional Radiological Society of Europe, where he is a fellow and has passed the European Board...... of Interventional Radiology - The European qualification in Interventional Radiology....

Sampling on radiological protection training in diagnostic radiology

International Nuclear Information System (INIS)

Gaona, E.

2001-01-01

Radiological security aspects were evaluated in radiology departments from Mexico City. The study was carried out in two stages, the first one evaluated 40 departments just before the implementation of the new Official Mexican Standards related to Radiological Security and Quality Control in Radiology; in the second stage 33 departments were evaluated 2 years after those standards were implanted, showing a favorable impact of the training programs for the type of answers obtained [es

Gastrointestinal Manifestations of Cystic Fibrosis

Science.gov (United States)

2016-01-01

Cystic fibrosis has historically been considered a pulmonary disease, but with the increasing life expectancy of these patients, gastrointestinal manifestations are becoming more important. Furthermore, nutritional status is closely linked to pulmonary function and, thus, overall mortality. This article discusses gastrointestinal manifestations (which involve nutritional, pancreatic, hepatobiliary, and, in particular, gastrointestinal tract issues) of cystic fibrosis as well as management of the disease. In addition, the article discusses studies that have been critical to our understanding of gastrointestinal manifestations of cystic fibrosis. PMID:27330503

How to Investigate Polish Clusters’ Attractiveness for Inward FDI? Addressing Ambiguity Problem

Directory of Open Access Journals (Sweden)

Götz Marta

2014-09-01

Full Text Available The aim of the paper is to assess whether, and in what fashion, managers of Polish cluster organizations perceive the attractiveness of foreign direct investment in Polish clusters This research is exploratory and qualitative in nature. The complex nature of Polish clusters, which can benefit from and be competitively challenged by, FDI are identified and a conceptual framework for assessing that nature is proposed; specifically, research using the grounded theory method (GTM.

Scintigraphic assessment of gastrointestinal motility

DEFF Research Database (Denmark)

Madsen, Jan Lysgård

2014-01-01

intestinal and colonic transit. This article reviews current imaging techniques, methods for data processing and principles for evaluating results when scintigraphy is used to assess gastrointestinal motility. Furthermore, clinical indications for performing scintigraphy are reviewed.......Gastrointestinal transit reflects overall gastrointestinal motor activity and is regulated by a complex interplay between neural and hormonal stimuli. Thus, transit measurements provide a measure of the combined effects of gastrointestinal muscular activity and feedback from the gut and brain....... Dysmotility in the different major segments of the gastrointestinal tract may give rise to similar symptoms; hence, localizing transit abnormalities to a specific segment is a valuable element of diagnostic evaluation. Scintigraphy is an effective noninvasive tool to assess gastric emptying as well as small...

Robotic Automation in Computer Controlled Polishing

Science.gov (United States)

Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

2016-02-01

We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

Energy Technology Data Exchange (ETDEWEB)

Ribeill, G.; Reece, C.

2008-01-01

Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

Gastrointestinal Basidiobolomycosis, a Rare and Under-diagnosed Fungal Infection in Immunocompetent Hosts: A Review Article

Directory of Open Access Journals (Sweden)

Bita Geramizadeh

2015-03-01

Full Text Available Gastrointestinal Basidiobolomycosis (GIB is an unusual, rare, but emerging fungal infection in the stomach, small intestine, colon, and liver. It has been rarely reported in the English literature and most of the reported cases have been from US, Saudi Arabia, Kuwait, and Iran. In the last five years, 17 cases have been reported from one or two provinces in Iran, and it seems that it has been undiagnosed or probably unnoticed in other parts of the country. In this review, we explored the English literature from 1964 through 2013 via PubMed, Google, and Google scholar using the following search keywords: 1 Basidiobolomycosis 2 Basidiobolus ranarum 3 Gastrointestinal Basidiobolomycosis In this review, we attempted to collect all clinical, pathological, and radiological findings of the presenting patients; complemented with previous experiences regarding the treatment and prognosis of the GIB. Since 1964, only 71 cases have been reported, which will be fully described in terms of clinical presentations, methods of diagnosis and treatment as well as prognosis and follow up.

Multi-objective optimization of circular magnetic abrasive polishing of SUS304 and Cu materials

Energy Technology Data Exchange (ETDEWEB)

Nguyen, NhatTan; Yin, ShaoHui; Chen, FengJun; Yin, HanFeng [Hunan University, Changsha (China); Pham, VanThoan [Hanoi University, Hanoi (Viet Nam); Tran, TrongNhan [Industrial University of Ho Chi Minh City, HCM City (Viet Nam)

2016-06-15

In this paper, a Multi-objective particle swarm optimization algorithm (MOPSOA) is applied to optimize surface roughness of workpiece after circular magnetic abrasive polishing. The most important parameters of polishing model, namely current, gap between pole and workpiece, spindle speed and polishing time, were considered in this approach. The objective functions of the MOPSOA depend on the quality of surface roughness of polishing materials with both simultaneous surfaces (Ra1, Ra2), which are determined by means of experimental approach with the aid of circular magnetic field. Finally, the effectiveness of the approach is compared between the optimal results with the experimental data. The results show that the new proposed polishing optimization method is more feasible.

Etymology in the Polish Academy of Sciences Great Dictionary of ...

African Journals Online (AJOL)

The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

Antecedents of Accelerated Internationalisation of Polish and Czech Small and Medium-Sized Enterprises

Directory of Open Access Journals (Sweden)

Izabela Kowalik

2017-09-01

Full Text Available Objective: The study goal was the investigation of relationships between accelerated internationalisation descriptors and antecedent firm- and entrepreneur-related factors in Polish and Czech SMEs. Research Design & Methods: In order to compare Polish and Czech companies, the data collected in two independent studies were used. The study of 233 Polish companies was conducted with the use of CATI method in 2014; 108 Czech companies were surveyed in 2013/2014 with the use of CAWI method. In both samples half of the surveyed SME-exporters were conforming to the accelerated internationalisation criteria. Findings: In both samples the “global vision” elements and company internationalisation scale and speed were interrelated. In the Polish companies this relationship was moderated by company size. There was the lack of strong positive relationships between innovativeness and internationalisation speed and scale in both samples. Implications & Recommendations:The managerial mindset has a decisive role for accelerated internationalisation in both Czech and Polish SMEs. The innovativeness of offering is not indispensable for fast foreign expansion. Larger companies may expand abroad faster if they have internationally oriented managers. Contribution & Value Added:This work addresses a research gap concerning idiosyncrasies of internationalisation antecedents in Polish and Czech enterprises. As the results show, there is no common internationalisation pattern for Polish and Czech SMEs.

Chronicle of pediatric radiology

International Nuclear Information System (INIS)

Benz-Bohm, Gabriele; Richter, Ernst

2012-01-01

The chronicle of pediatric radiology covers the following issues: Development of pediatric radiology in Germany (BRD, DDR, pediatric radiological accommodations); development of pediatric radiology in the Netherlands (chronology and pediatric radiological accommodations); development of pediatric radiology in Austria (chronology and pediatric radiological accommodations); development of pediatric radiology in Switzerland (chronology and pediatric radiological accommodations).

Effect of grinding and polishing on roughness and strength of zirconia.

Science.gov (United States)

Khayat, Waad; Chebib, Najla; Finkelman, Matthew; Khayat, Samer; Ali, Ala

2018-04-01

The clinical applications of high-translucency monolithic zirconia restorations have increased. Chairside and laboratory adjustments of these restorations are inevitable, which may lead to increased roughness and reduced strength. The influence of grinding and polishing on high-translucency zirconia has not been investigated. The purpose of this in vitro study was to compare the roughness averages (Ra) of ground and polished zirconia and investigate whether roughness influenced strength after aging. High-translucency zirconia disks were milled, sintered, and glazed according to the manufacturer's recommendations. Specimens were randomized to 4 equal groups. Group G received only grinding; groups GPB and GPK received grinding and polishing with different polishing systems; and group C was the (unground) control group. All specimens were subjected to hydrothermal aging in an autoclave at 134°C at 200 kPa for 3 hours. Roughness average was measured using a 3-dimensional (3D) optical interferometer at baseline (Ra1), after grinding and polishing (Ra2), and after aging (Ra3). A biaxial flexural strength test was performed at a rate of 0.5 mm/min. Statistical analyses were performed using commercial software (α=.05). Group G showed a significantly higher mean value of Ra3 (1.96 ±0.32 μm) than polished and glazed groups (P.05). Compared with baseline, the roughness of groups G and GPB increased significantly after surface treatments and after aging, whereas aging did not significantly influence the roughness of groups GPK or C. Group G showed the lowest mean value of biaxial flexural strength (879.01 ±157.99 MPa), and the highest value was achieved by group C (962.40 ±113.84 MPa); no statistically significant differences were found among groups (P>.05). Additionally, no significant correlation was detected between the Ra and flexural strength of zirconia. Grinding increased the roughness of zirconia restorations, whereas proper polishing resulted in smoothness

Comparison of risk scoring systems for patients presenting with upper gastrointestinal bleeding

DEFF Research Database (Denmark)

Stanley, Adrian J; Laine, Loren; Dalton, Harry R

2017-01-01

OBJECTIVE: To compare the predictive accuracy and clinical utility of five risk scoring systems in the assessment of patients with upper gastrointestinal bleeding. DESIGN: International multicentre prospective study. SETTING: Six large hospitals in Europe, North America, Asia, and Oceania...... clinical endpoints: a composite endpoint (transfusion, endoscopic treatment, interventional radiology, surgery, or 30 day mortality), endoscopic treatment, 30 day mortality, rebleeding, and length of hospital stay. Optimum score thresholds to identify low risk and high risk patients were determined...... accuracy at predicting need for hospital based intervention or death. Scores of ≤1 appear the optimum threshold for directing patients to outpatient management. AUROCs of scores for the other endpoints are less than 0.80, therefore their clinical utility for these outcomes seems to be limited...

Acoustic Emission Based In-process Monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

The applicability of acoustic emission (AE) measurements for in-process monitoring in the Robot Assisted Polishing (RAP) process was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate removal...... improving the efficiency of the process. It also allows for intelligent process control and generally enhances the robustness and reliability of the automated RAP system in industrial applications....... of the part from the machine tool. In this study, development of surface roughness during polishing rotational symmetric surfaces by the RAP process was inferred from AE measurements. An AE sensor was placed on a polishing tool, and a cylindrical rod of Vanadis 4E steel having an initial turned surface...

Is the renal excretion of orally applied diatrizoate (Gastrografin copyright) a reliable marker of gastrointestinal perforation or dehiscence of a gastrointestinal anastomosis?

International Nuclear Information System (INIS)

Born, M.; Axmann, C.; Kader, R.; Falkenhausen, M. von; Manka, C.; Willinek, W.A.; Schild, H.

2004-01-01

Purpose: Renal excretion of orally or rectally applied Gastrografin is reported to be a reliable indicator of a perforation or a post-operative anastomotic dehiscence of the GI-tract. The study was conducted to determine whether increased attenuation of the urine measured by CT after oral or rectal application of Gastrografin can give reliable evidence of any leakage from the gastrointestinal tract. Materials and Methods: Urine samples of 33 patients, who underwent a Gastrografin-enhanced fluoroscopic examination of the esophagus or the GI-tract for different clinical reasons, were examined by CT. The samples had been taken immediately before and 60 to 90 minutes after application of 100 ml Gastrografin. The results were compared with those of 5 healthy volunteers, who took urine samples before, 30, 60, 90, and 120 minutes after drinking 100 ml of Gastrografin. Results: Maximal attenuation of the volunteers' urine samples was achieved 60 to 90 minutes after Gastrografin application with a mean of 50 Hounsfield units (HU), SD=17 HU. The urine of three patients with radiologically proven fistula or dehiscence of a GI-tract anastomosis had no relevant increase in attenuation. Three other cases without any clinical or radiological evidence of an anastomotic leak had a substantial increase in the attenuation of the urine probes (87, 110, and 290 HU, respectively). Conclusion: The CT-measured urine samples as evidence of renal excretion of orally or rectally applied Gastrografin are not reliable for the detection of leaks from the GI-tract. (orig.)

Surface changes of metal alloys and high-strength ceramics after ultrasonic scaling and intraoral polishing.

Science.gov (United States)

Yoon, Hyung-In; Noh, Hyo-Mi; Park, Eun-Jin

2017-06-01

This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were 3.02±0.34 µm, 2.44±0.72 µm, and 3.49±0.72 µm, respectively. Surface roughness of lithium disilicate increased from 2.35±1.05 µm (pristine) to 28.54±9.64 µm (scaling), and further increased after polishing (56.66±9.12 µm, P scaling (from 1.65±0.42 µm to 101.37±18.75 µm), while its surface roughness decreased after polishing (29.57±18.86 µm, P scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

KIT-negative Gastrointestinal Stromal Tumor in a Child: A Case Report

Energy Technology Data Exchange (ETDEWEB)

Lim, Se Woong; Lee, Young Hwan; Park, Sang Hyeon; Choi, Du young; Choi, Geum Ha [Wonkwang University School of Medicine and Hospital, Iksan (Korea, Republic of)

2011-01-15

We report here on the imaging findings of the case of KIT-negative gastrointestinal stromal tumor (GIST) in the stomach of a 12-year-old girl. Radiologic studies revealed the presence of a huge exophytic growing mass that originated from the gastric wall and this mass consisted of solid and cystic components on USG, CT and MR. The cystic regions were mainly located at the periphery of the mass and they were revealed to be myxoid degeneration and hemorrhage on histopathologic examination. The tumor consisted of epithelioid and typical spindle cells and they showed negative immunoreactivity for KIT. Although KIT-negative GISTs are rare, they can be considered in the differential diagnosis when a large heterogeneous extraluminal mass that contains solid portions and various degrees of peripheral cystic regions is observed

Emissions from the Polish power industry

International Nuclear Information System (INIS)

Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

2007-01-01

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

Social Interest in The Polish Doctrine of Monument Preservation

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

Scope of Nursing Care in Polish Intensive Care Units

Directory of Open Access Journals (Sweden)

Mariusz Wysokiński

2013-01-01

Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

Imaging and radiology

Science.gov (United States)

Interventional radiology; Diagnostic radiology; X-ray imaging ... DIAGNOSTIC RADIOLOGY Diagnostic radiology helps health care professionals see structures inside your body. Doctors that specialize in the interpretation ...

Polish Qualitative Sociology. Insight into the future of postdisciplinary research

OpenAIRE

Konecki, Krzysztof

2014-01-01

The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

A long-Segmental Vascular Malformation in the Small Bowel Presenting With Gastrointestinal Bleeding in a Preschool-Aged Child

International Nuclear Information System (INIS)

Lee, Yeoun Joo; Hwang, Jae-Yeon; Cho, Yong Hoon; Kim, Yong-Woo; Kim, Tae Un; Shin, Dong Hoon

2016-01-01

Gastrointestinal (GI) bleeding in pediatric patients has several causes. Vascular malformation of the small bowel is a rare disease leading to pediatric GI bleeding. To our knowledge, few reports describe ultrasound and computed tomography findings of venous malformations involving the small bowel. We present a case of long-segmental and circumferential vascular malformation that led to GI bleeding in a pre-school aged child, focusing on the radiologic findings. Although vascular malformation including of the GI tract is rare in children, it should be considered when GI bleeding occurs in pediatric patients

Surface roughness of microparticulated and nanoparticulated composites after finishing and polishing procedures

Directory of Open Access Journals (Sweden)

Rosemary Arai Sadami Shinkai

Full Text Available Objective: To evaluated the surface roughness of one microparticulate resin composite Durafill (Heraeus Kulzer Weihrheim, Germany andfour nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein Esthet x (Dentsply, Milford, DE, USA, Point 4 and Supreme (3M-ESPE, Dental Products,St. Paul, MN, USA. Methods: After finishing with a diamond bur point (F, and polishing with silicone points of gray, green and pink color Politipit (Ivoclar Vivadent,Schaan, Liechtenstein, four stages of completion were performed, simulating one of finishing and three of polishing a resin restoration. Ten samples of each composite resin were measured for surface roughness with surface profilometer (Mitutoyo Corporation, Tokyo, Japan after each of finishing and polishing sequence.Results: The results showed that nanoparticulate and microparticulate resins presented a significant difference in the surface roughness values, in all finishing and polishing steps. Conclusion: Of the the nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein, Point 4 (Kerr CO, Orange, CA, USA, and also microparticulate Durafill (Heraeus Kulzer Weihrheim, Germany presented significantly lower surface roughness values after completing all the finishing and polishing stages.

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.; Holdener, F.R.; Heck, J.L. Jr.

1994-04-01

New machining and polishing techniques have been developed for large scintillating crystal arrays such as the Barium Fluoride Electromagnetic Calorimeter for the GEM Detector at SSCL, the Crystal Clear Collaboration's cerium fluoride or lead tungstenate calorimeter at the proposed LHC and CERN, the PHENIX Detector at RHIC (barium fluoride), and the cesium iodide Calorimeter for the BaBar Detector at PEP-2 B Factory at SLAC. The machining and polishing methods to be presented in this paper provide crystalline surfaces without sub-surface damage or deformation as verified by Rutherford Back-scattering (RBS) analysis. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large barium fluoride crystal samples. Mass production techniques have also been developed for machining the proper angled surfaces and polishing up to five 50 cm long crystals at one time. These techniques utilize kinematic mount technology developed at LLNL to allow precision machining and polishing of complex surfaces. They will present this technology along with detailed surface studies of barium fluoride and cerium fluoride crystals polished with this technique

Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

2016-01-01

The applicability of acoustic emission (AE) measurements for in-process monitoring of surface generation in the robot-assisted polishing (RAP) was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate...... automatic detection of optimal process endpoint allow intelligent process control, creating fundamental elements in development of robust fully automated RAP process for its widespread industrial application....... removal of the part from the machine tool. In this study, stabilisation of surface roughness during polishing rotational symmetric surfaces by the RAP process was monitored by AE measurements. An AE sensor was placed on a polishing arm in direct contact with a bonded abrasive polishing tool...

Radiological Control Manual

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

Radiological Control Manual

International Nuclear Information System (INIS)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

Effect of one-step polishing system on the color stability of nanocomposites.

Science.gov (United States)

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Recovery of rare earths from used polishes by chemical vapor transport process

International Nuclear Information System (INIS)

Ozaki, T.; Machida, K.; Adachi, G.

1998-01-01

Full text: Rare earth oxide polishes are widely used in the glass industry because of its mechanical and chemical polishing action. The Japanese glass industry use 2000 tons per year of the polishes, and a large portion of them are thrown away after their polishing lifetime. A dry recovery processes for rare earths from the used polishes have been investigated by using a chemical vapor transport method via the formation of vapor complexes RAl n Cl 3+3n (R = rare earths). A flow type reactor with various temperature gradients was employed for the process. The used polishes were mixed with active carbon, and chlorinated with N 2 + Cl 2 mixture at 1273 K. Aluminium oxide were also chlorinated at lower temperature and the resulting AlCl 3 were introduced to the reactor. The rare earth chlorides and AlCl 3 were converted to the vapor complexes. These were driven along the temperature gradient, decomposed according to the reverse reaction, and regenerated RCl 3 . About 90 % of the used polish were chlorinated after 2 hours. Rare earth chlorides, AlCl 3 , and FeCl 3 were fully transported after 82 hours. The rare earth chlorides were mainly condensed over the temperature range 1263-903 K. On the other hand, AlCl 3 and FeCl 3 were deposited at the temperature range below 413 K. CaCl 2 and SrCl 2 were hardly transported and remained in the residue. When the temperature gradient with the smaller slope was used, mutual separation efficiencies among the rare earths was improved. The highest CeCl 3 purity of 80% was obtained in the process

Radiological English

Energy Technology Data Exchange (ETDEWEB)

Ribes, R. [Hospital Reina Sofia, Cordoba (Spain). Servicio de Radiologia; Ros, P.R. [Harvard Medical School, Boston, MA (United States). Div. of Radiology

2007-07-01

The book is an introductory book to radiological English on the basis that there are a lot of radiologists, radiology residents, radiology nurses, radiology students, and radiographers worldwide whose English level is indeterminate because their reading skills are much higher than their fluency. It is intended to help those health care professionals who need English for their work but do not speak English on a day-to-day basis. (orig.)

Radiological English

International Nuclear Information System (INIS)

Ribes, R.; Ros, P.R.

2007-01-01

The book is an introductory book to radiological English on the basis that there are a lot of radiologists, radiology residents, radiology nurses, radiology students, and radiographers worldwide whose English level is indeterminate because their reading skills are much higher than their fluency. It is intended to help those health care professionals who need English for their work but do not speak English on a day-to-day basis. (orig.)

A clinico-radiological reappraisal of intestinal tuberculosis

International Nuclear Information System (INIS)

Tandon, R.K.; Sarin, S.K.; Bose, S.L.; Berry, M.; Tandon, B.N.

1986-01-01

Intestinal tuberculosis is still common in developing countries. In 186 patients with intestinal tuberculosis, clinical features, radiological findings and complications were carefully recorded and compared with those from earlier studies with a view to study any possible changes after the liberal use of antitubercular drugs. Sixty two percent of the patients in the present series had had prior exposure to antitubercular drugs. The incidence of systemic symptoms like fever and anorexia, alternating diarrhoea and constipation, peritoneal and lymph node involvements and associated pulmonary lesions were less frequently observed. On the other hand, an indolent and complicated course with intestinal obstruction (47 %) and lower gastrointestinal bleeding (5.5 %) and frequent colonic involvement (19 %) often necessitating surgical intervention appeared to have become more frequent than reported in earlier series. Awareness of these changes in the clinical profile of intestinal tuberculosis should be helpful in the diagnosis and management of the condition. (author)

Gastrointestinal Stromal Tumors: A Case Report

OpenAIRE

Sashidharan, Palankezhe; Matele, Apoorva; Matele, Usha; Al Felahi, Nowfel; Kassem, Khalid F.

2014-01-01

Advances in the identification of gastrointestinal stromal tumors, its molecular and immunohiostochemical basis, and its management have been a watershed in the treatment of gastrointestinal tumors. This paradigm shift occurred over the last two decades and gastrointestinal stromal tumors have now come to be understood as rare gastrointestinal tract tumors with predictable behavior and outcome, replacing the older terminologies like leiomyoma, schwannoma or leiomyosarcoma. This report present...

Evaluation of one-step micro polishers for residual resin removal after debonding on fluorosed teeth

Directory of Open Access Journals (Sweden)

Padmalatha Challa

2014-01-01

Full Text Available Aim and objectives: To evaluate the effectiveness of one step micro polishers for residual resin removal on fluorosed teeth using scanning electron microscope (SEM. Methods and Material: 55 teeth with mild to moderate fluorosis were selected with five teeth as control. Metal brackets were bonded onto 50 teeth which were divided into 5 groups. The finishing and polishing methods which were tested include tungsten carbide burs (TCB, multistep finishing system (Sof-Lex, one step polishers (PoGo and combination of TCB with multistep and one step polishing systems. After resin removal, all the samples were examined under SEM for assessment of the enamel surface. Results: The enamel surface was closest to untouched enamel in samples finished with the PoGo one step polishers followed by Sof-Lex multistep finishing system. However, they took the longest time to finish. TCB required the shortest time for residual resin removal. Conclusions: All polishing systems produce a certain degree of damage to the enamel surface with the smoothest surface being produced by one step polishers on fluorosed teeth.

RSVP radiology

International Nuclear Information System (INIS)

Kirks, D.R.; Chaffee, D.J.

1990-01-01

This paper develops a relative scale of value for pediatric radiology (RSVPR). Neither the HCFA/ACA Relative Value Scale nor the Workload Measurement System developed by Health and Welfare Canada specifically addressed pediatric radiologic examinations. Technical and professional charges for examinations at Children's Hospital Medical Center were reviewed and compared with time and cost analysis. A scale was developed with chest radiography (PA and lateral views) assigned a value of 1. After review by pediatric radiologic technologists, radiologic administrators, pediatric radiologists, and chairs of departments of children's hospitals, this proposed scale was modified to reflect more accurately relative value components of pediatric radiologic and imaging examinations

Outcome Following a Negative CT Angiogram for Gastrointestinal Hemorrhage

Energy Technology Data Exchange (ETDEWEB)

Chan, Victoria, E-mail: drvictoriac@gmail.com; Tse, Donald, E-mail: donald.tse@gmail.com; Dixon, Shaheen, E-mail: shaheen7noorani@gmail.com [John Radcliffe Hospital, Department of Radiology, Level 2 (United Kingdom); Shrivastava, Vivek, E-mail: vivshriv@yahoo.com [Hull Royal Infirmary, Department of Radiology (United Kingdom); Bratby, Mark, E-mail: mark.bratby@ouh.nhs.uk; Anthony, Suzie, E-mail: suzie.anthony@ouh.nhs.uk; Patel, Rafiuddin, E-mail: rafiuddin.patel@ouh.nhs.uk; Tapping, Charles, E-mail: charles.tapping@ouh.nhs.uk; Uberoi, Raman, E-mail: raman.uberoi@orh.nhs.uk [John Radcliffe Hospital, Department of Radiology, Level 2 (United Kingdom)

2015-04-15

ObjectiveThis study was designed to evaluate the role of a negative computed tomography angiogram (CTA) in patients who present with gastrointestinal (GI) hemorrhage.MethodsA review of all patients who had CTAs for GI hemorrhage over an 8-year period from January 2005 to December 2012 was performed. Data for patient demographics, location of hemorrhage, hemodynamic stability, and details of angiograms and/or the embolization procedure were obtained from the CRIS/PACS database, interventional radiology database, secure electronic medical records, and patient’s clinical notes.ResultsA total of 180 patients had 202 CTAs during the 8-year period: 87 CTAs were performed for upper GI hemorrhage (18 positive for active bleeding, 69 negative) and 115 for lower GI hemorrhage (37 positive for active bleeding, 78 negative); 58.7 % (37/63) of patients with upper GI bleed and 77.4 % (48/62) of patients with lower GI bleed who had an initial negative CTA did not rebleed without the need for radiological or surgical intervention. This difference was statistically significant (p = 0.04). The relative risk of rebleeding, following a negative CTA, in lower GI bleeding versus upper GI bleeding patients is 0.55 (95 % confidence interval 0.32–0.95).ConclusionsPatients with upper GI bleed who had negative CTAs usually require further intervention to stop the bleeding. In contrast, most patients presenting with lower GI hemorrhage who had a negative first CTA were less likely to rebleed.

Outcome Following a Negative CT Angiogram for Gastrointestinal Hemorrhage

International Nuclear Information System (INIS)

Chan, Victoria; Tse, Donald; Dixon, Shaheen; Shrivastava, Vivek; Bratby, Mark; Anthony, Suzie; Patel, Rafiuddin; Tapping, Charles; Uberoi, Raman

2015-01-01

ObjectiveThis study was designed to evaluate the role of a negative computed tomography angiogram (CTA) in patients who present with gastrointestinal (GI) hemorrhage.MethodsA review of all patients who had CTAs for GI hemorrhage over an 8-year period from January 2005 to December 2012 was performed. Data for patient demographics, location of hemorrhage, hemodynamic stability, and details of angiograms and/or the embolization procedure were obtained from the CRIS/PACS database, interventional radiology database, secure electronic medical records, and patient’s clinical notes.ResultsA total of 180 patients had 202 CTAs during the 8-year period: 87 CTAs were performed for upper GI hemorrhage (18 positive for active bleeding, 69 negative) and 115 for lower GI hemorrhage (37 positive for active bleeding, 78 negative); 58.7 % (37/63) of patients with upper GI bleed and 77.4 % (48/62) of patients with lower GI bleed who had an initial negative CTA did not rebleed without the need for radiological or surgical intervention. This difference was statistically significant (p = 0.04). The relative risk of rebleeding, following a negative CTA, in lower GI bleeding versus upper GI bleeding patients is 0.55 (95 % confidence interval 0.32–0.95).ConclusionsPatients with upper GI bleed who had negative CTAs usually require further intervention to stop the bleeding. In contrast, most patients presenting with lower GI hemorrhage who had a negative first CTA were less likely to rebleed

Chemical-mechanical polishing of metal and dielectric films for microelectronic applications

Science.gov (United States)

Hegde, Sharath

The demand for smaller, faster devices has led the integrated circuit (IC) industry to continually increase the device density on a chip while simultaneously reducing feature dimensions. Copper interconnects and multilevel metallization (MLM) schemes were introduced to meet some of these challenges. With the employment of MLM in the ultra-large-scale-integrated (ULSI) circuit fabrication technology, repeated planarization of different surface layers with tolerance of a few nanometers is required. Presently, chemical-mechanical planarization (CMP) is the only technique that can meet this requirement. Damascene and shallow trench isolation processes are currently used in conjunction with CMP in the fabrication of multilevel copper interconnects and isolation of devices, respectively, for advanced logic and memory devices. These processes, at some stage, require simultaneous polishing of two different materials using a single slurry that offers high polish rates, high polish selectivity to one material over the other and good post-polish surface finish. Slurries containing one kind of abrasive particles do not meet most of these demands due mainly to the unique physical and chemical properties of each abrasive. However, if a composite particle is formed that takes the advantages of different abrasives while mitigating their disadvantages, the CMP performance of resulting abrasives would be compelling. It is demonstrated that electrostatic interactions between ceria and silica particles at pH 4 can be used to produce composite particles with enhanced functionality. Zeta potential measurement and TEM images used for particle characterization show the presence of such composite particles with smaller shell particles attached onto larger core particles. Slurries containing ceria (core)/silica (shell) and silica (core)/ceria (shell) composite particles when used to polish metal and dielectric films, respectively, yield both enhanced metal and dielectric film removal rates

Radiological anatomy - evaluation of integrative education in radiology.

Science.gov (United States)

Dettmer, S; Schmiedl, A; Meyer, S; Giesemann, A; Pabst, R; Weidemann, J; Wacker, F K; Kirchhoff, T

2013-09-01

Evaluation and analysis of the integrative course "Radiological Anatomy" established since 2007 at the Medical School Hannover (MHH) in comparison with conventional education. Anatomy and radiology are usually taught separately with a considerable time lag. Interdisciplinary teaching of these associated subjects seems logical for several reasons. Therefore, the integrative course "Radiological Anatomy" was established in the second year of medical education, combining these two closely related subjects. This interdisciplinary course was retrospectively evaluated by consideration of a student questionnaire and staff observations. The advantages and disadvantages of integrative teaching in medical education are discussed. The course ratings were excellent (median 1; mean 1.3 on a scale of 1 to 6). This is significantly (p radiology increased during the course (88 %). According to the students' suggestions the course was enhanced by a visitation in the Department of Radiology and the additional topic central nervous system. Integrative teaching of anatomy and radiology was well received by the students. Both, anatomical and radiological comprehension and the motivation to learn were improved. However, it should be considered, that the amount of work and time required by the teaching staff is considerably increased compared to traditional teaching. © Georg Thieme Verlag KG Stuttgart · New York.

Analysis of the Radiology Reports from Radiology Clinics

International Nuclear Information System (INIS)

Kim, Eun Jin; Kwack, Kyu Sung; Cho, Jae Hyun; Jang, Eun Ho

2009-01-01

The purpose of this study was to investigate the form and content of the radiology reports from radiology clinics in Korea. One hundred and sixty six radiology reports from 49 radiology clinics were collected, and these reports were referred to the academic tertiary medical center from March 2008 to February 2009. These included reports for CT (n = 18), MRI (n = 146) and examinations not specified (n = 2). Each report was evaluated for the presence of required contents (demographics, technical information, findings, conclusion, the name, license number and signature of the radiologist and the referring facility). These requirements were based on the guideline of the American College of Radiology and the previous research. The name of the patient, the gender, the body part, the type of examination, the time of examination and the conclusion, the name of the radiologist and the name of facility were well recorded in over 90% of the radiology reports. However, the identification number of the patient, the referring facility, the referring physician, the use of contrast material, the clinical information, the time of dictation, the signature of the radiologist and the license number of the radiologist were poorly recorded (less than 50%). The optimal format of a radiology report should be established for reliable and valid communication with clinicians

Mirror surface metrology and polishing for AXAF/TMA

International Nuclear Information System (INIS)

Slomba, A.; Babish, R.; Glenn, P.

1985-01-01

The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

Preparation of cerium oxide for lens polishing powder

International Nuclear Information System (INIS)

Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

2003-10-01

Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

Directory of Open Access Journals (Sweden)

Jędryczka Małgorzata

2014-07-01

Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

Directory of Open Access Journals (Sweden)

Szlanta Piotr

2017-06-01

Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

Efficacy of polishing kits on the surface roughness and color stability ...

African Journals Online (AJOL)

Objective: Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Materials and Methods: Thirty specimens were made for each composite ...

Research status in ultra-precision machining of silicon carbide parts by oxidation-assisted polishing

Directory of Open Access Journals (Sweden)

Xinmin SHEN

2016-10-01

Full Text Available Oxidation-assisted polishing is an important machining method for obtaining SiC parts with high precision. Through plasma oxidation, thermal oxidation, and anodic oxidation, soft oxide can be obtained on the RS-SiC substrate. With the assistance of abrasive polishing to remove the oxide rapidly, the material removal rate can be increased and the surface quality can be improved. The research results indicate that the surface roughness root-mean-square (RMS and roughness-average (Ra can reach 0.626 nm and 0.480 nm by plasma oxidation-assisted polishing; in thermal oxidation-assisted polishing, the RMS and Ra can be 0.920 nm and 0.726 nm; in anodic oxidation, the calculated oxidation rate is 5.3 nm/s based on Deal-Grove model, and the RMS and Ra are 4.428 nm and 3.453 nm respectively in anodic oxidation-assisted polishing. The oxidation-assisted polishing can be propitious to improve the process level in machining RS-SiC, which would promote the application of SiC parts in optics and ceramics fields.

The present conditions of interpretation and findings report in UGI series examination (The Japanese society gastrointestinal imaging report group performed questionary survey)

International Nuclear Information System (INIS)

Sato, Shinsuke; Aoki, Ryosuke; Yoshida, Takashi; Nishikawa, Takashi; Takahashi, Nobuyuki; Ishimoto, Yuji

2008-01-01

The Japanese society gastrointestinal imaging report group performed questionary survey to relate to interpretation of radiogram of radiological technologist and findings report in upper GI series examination for 599 national institutions. Response rate was 27%, and many of answers were the institutions where surgical treatment was possible. Additional radiography examining by radiological technologist depending on the situation and, it was recognized a doctor furthermore, institutions more than 70% made findings report after examination, and, as for the mention methods of findings report, there was difference in mention contents, and character by examination classification. It seemed the mention methods that we unified were difficult nationwide, and, however, as for the making of the findings report which used diagnosis flow chart, it was thought with possibility in future by enlightenment active. (author)

Radiology research in mainland China in the past 10 years: a survey of original articles published in Radiology and European Radiology.

Science.gov (United States)

Zhang, Long Jiang; Wang, Yun Fei; Yang, Zhen Lu; Schoepf, U Joseph; Xu, Jiaqian; Lu, Guang Ming; Li, Enzhong

2017-10-01

To evaluate the features and trends of Radiology research in Mainland China through bibliometric analysis of the original articles published in Radiology and European Radiology (ER) between 2006 and 2015. We reviewed the original articles published in Radiology and ER between 2006 and 2015. The following information was abstracted: imaging subspecialty, imaging technique(s) used, research type, sample size, study design, statistical analysis, study results, funding declarations, international collaborations, number of authors, department and province of the first author. All variables were examined longitudinally over time. Radiology research in Mainland China saw a substantial increase in original research articles published, especially in the last 5 years (P Radiology research, neuroradiology, vascular/interventional Radiology, and abdominal Radiology were the most productive fields; MR imaging was the most used modality, and a distinct geographic provenience was observed for articles published in Radiology and ER. Radiology research in Mainland China has seen substantial growth in the past 5 years with neuroradiology, vascular/interventional Radiology, and abdominal Radiology as the most productive fields. MR imaging is the most used modality. Article provenience shows a distinct geographical pattern. • Radiology research in Mainland China saw a substantial increase. • Neuroradiology, vascular/interventional Radiology, and abdominal Radiology are the most productive fields. • MRI is the most used modality in Mainland China's Radiology research. • Guangdong, Shanghai, and Beijing are the most productive provinces.

Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

International Nuclear Information System (INIS)

Nichols, M A

2001-01-01

The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

New surface modification method of bio-titanium alloy by EB polishing

International Nuclear Information System (INIS)

Okada, Akira; Uno, Yoshiyuki; Iio, Atsuo; Fujiwara, Kunihiko; Doi, Kenji

2008-01-01

A new surface modification for bio-titanium alloy products by electron beam (EB) polishing is proposed. In this EB polishing method, high energy density EB can be irradiated without concentrating the beam. Therefore, large-area EB with a maximum diameter of 60 mm can be used for instantaneously melting or evaporating metal surface. Experimental results made it clear that surface characteristics, such as repellency, corrosion resistance and coefficient of friction could be improved simultaneously with the surface smoothing in a few minutes under a proper condition. Therefore, EB polishing method has a possibility of high efficient surface smoothing and surface modification process for bio-titanium alloy. (author)

Gastrointestinal Stromal Tumors: A Case Report

Directory of Open Access Journals (Sweden)

Palankezhe Sashidharan

2014-03-01

Full Text Available Advances in the identification of gastrointestinal stromal tumors, its molecular and immunohiostochemical basis, and its management have been a watershed in the treatment of gastrointestinal tumors. This paradigm shift occurred over the last two decades and gastrointestinal stromal tumors have now come to be understood as rare gastrointestinal tract tumors with predictable behavior and outcome, replacing the older terminologies like leiomyoma, schwannoma or leiomyosarcoma. This report presents a case of gastric gastrointestinal stromal tumor operated recently in a 47-year-old female patient and the outcome, as well as literature review of the pathological identification, sites of origin, and factors predicting its behavior, prognosis and treatment.

Introduction of radiological protection; Pengenalan kepada perlindungan radiologi

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-31

The chapter briefly discussed the following subjects: basic principles of radiological protection , dose limit which was suggested, stochastic and nonstochastic effects, equivalent dose and alternative of it`s calculation, limit for the publics, ICRP (International Commission for Radiological Protection) recommendations, and the principles of radiological protection. Dangerous radiation sources also briefly summarized i.e. x-ray generators, reactor nucleus.

Family Enterprises in Polish Consumers' Mindset in the Light of International Tendencies

Directory of Open Access Journals (Sweden)

Joanna Bednarz

2017-07-01

Full Text Available Aim/purpose - The main aim of the paper is to fill in the gap in the existing literature as well as to propose a set of specific family enterprises' (FE attributes concerning certain socioeconomic conditions in Poland. The objectives of the article are interrelated with two theses. H1 assumes that in current literature there is a little attention paid to the demand side of the market, particularly to the individual consumers (including young buyers and their attitudes toward FEs. H2 indicates that the perception of Polish FEs changes considerably reflecting the international trends. Design/methodology/approach - The authors studied a consolidated profound review of recent international and Polish publications on FEs. The expert interviews and in-depth individual interviews were conducted. Both empirical studies brought a preliminary insight into overall consumer perception of the FEs in Poland. Findings - For several years Polish buyers have been dynamically changing their mindset, breaking the stereotype of FEs' owners. Nowadays, tradition and quality are two attributes which are associated closely with Polish FEs. Customers indicate that FEs are trustworthy, responsible, solid and dependable. They also highlight the ethnocentric attitude toward these companies - Polishness. All these attributes are evidently appreciated. FEs are correlated with traditional industries and products, especially with groceries, cosmetics, clothes, shoes, jewelry, furniture, windows and doors. Research implications/limitations - The identity of FEs is not always communicated properly. Consumers often cannot ascertain a provenance of their offer as many FEs do not emphasize their family identity. Additionally, on the Polish market, consumers are occasionally misled considering the family ownership of a business. Originality/value/contribution - The studies indicate a set of attributes typical of Polish FEs underpinning their strong identity which should be

Polishers around the globe: an overview on the market of large astronomical mirrors

Science.gov (United States)

Döhring, Thorsten

2014-07-01

Astronomical mirrors are key elements in modern optical telescopes, their dimensions are usually large and their specifications are demanding. Only a limited number of skilled companies respectively institutions around the world are able to master the challenge to polish an individual astronomical mirror, especially in dimensions above one meter. This paper presents an overview on the corresponding market including a listing of polishers around the globe. Therefore valuable information is provided to the astronomical community: Polishers may use the information as a global competitor database, astronomers and project managers may get more transparency on potential suppliers, and suppliers of polishing equipment may learn about unknown potential customers in other parts of the world. An evaluation of the historical market demand on large monolithic astronomical mirrors is presented. It concluded that this is still a niche market with a typical mean rate of 1-2 mirrors per year. Polishing of such mirrors is an enabling technology with impact on the development of technical know-how, public relation, visibility and reputation of the supplier. Within a corresponding technical discussion different polishing technologies are described. In addition it is demonstrated that strategic aspects and political considerations are influencing the selection of the optical finisher.

Gastrointestinal Headache; a Narrative Review

OpenAIRE

Majid T Noghani; Hossein Rezaeizadeh; Sayed Mohammad Baqer Fazljoo; Mahmoud Yousefifard; Mansoor Keshavarz

2016-01-01

There are studies reporting primary headaches to be associated with gastrointestinal disorders, and some report resolution of headache following the treatment of the associated gastrointestinal disorder. Headache disorders are classified by The International Headache Society as primary or secondary; however, among the secondary headaches, those attributed to gastrointestinal disorders are not appreciated. Therefore, we aimed to review the literature to provide evidence for headaches, which or...

Study on combined polishing process of aspherical aluminum mirrors

Science.gov (United States)

Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

2017-10-01

The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

Heavy Metal Contamination of Popular Nail Polishes in Iran

Directory of Open Access Journals (Sweden)

Golnaz Karimi

2015-06-01

Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

Holocaust Education in Polish Public Schools: Between Remembrance and Civic Education

Science.gov (United States)

Milerski, Boguslaw

2010-01-01

This article analyzes the historical and political context of Holocaust education, and its implementation in Polish schools. Perceptions of the Holocaust continue to change, influenced by Poland's social and political situation. The Polish historical context is quite specific; it includes the long history of Poles and Jews as neighbors, with local…

Polish Standard of the Technical Safety of Transmission Gas Pipelines

International Nuclear Information System (INIS)

Tkacz, A.J.

2006-01-01

The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

Radiological bile acid absorption test {sup 75}SeHCAT in patients with diarrhoea of unknown cause

Energy Technology Data Exchange (ETDEWEB)

Rudberg, U. [St. Goeran`s Hospital, Stockholm (Sweden). Dept. of Diagnostic Radiology; Nylander, B. [St. Goeran`s Hospital, Stockholm (Sweden). Dept. of Internal Medicine

1996-09-01

Purpose: The purpose with this study was to investigate the usefulness of the {sup 75}SeHCAT test in patients suffering from `functional` diarrhoea and to disclose earlier radiological investigations performed in the course of disease. Material and Methods: Twenty patients with chronic diarrhoea of unknown cause were investigated with the {sup 75}SeHCAT test. The cholestyramine test and an estimation of oro-caecal transit time (OCTT) were also performed in 13 and 10 patients respectively. Results: Ten patients had low 7-day retention ({<=}15%). Nine of these were tested with cholestyramine and 8 showed complete relief from the diarrhoea. The cholestyramine test had no effect on the 4 patients with normal bile acid retention. No correlation was found between the retention of {sup 75}SeHCAT and OCCT. A total of 80 inconclusive gastrointestinal barium examinations were performed during the course of disease. Conclusion: Pathological bile acid retention, studied with the radiological {sup 75}SeHCAT test, is common in patients with diarrhoea of unknown cause. The test should be performed earlier in the course of disease in order to prevent unnecessary radiological investigations and to reduce patient suffering and distress. (orig.).

Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

OpenAIRE

Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

2016-01-01

Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

OpenAIRE

Cukras-Stelągowska, Joanna

2015-01-01

In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

Radiology

International Nuclear Information System (INIS)

Edholm, P.R.

1990-01-01

This is a report describing diagnostic techniques used in radiology. It describes the equipment necessary for, and the operation of a radiological department. Also is described the standard methods used in radiodiagnosis. (K.A.E.)

Gastrointestinal polyposis in Cowden disease

International Nuclear Information System (INIS)

Kullnig, P.; Steiner, H.; Porsch, G.; Smolle, J.

1987-01-01

A case of Cowden disease (multiple hamartoma syndrome) with marked gastrointestinal polyposis is presented. The differential diagnosis of gastrointestinal polyposis syndromes is discussed. (orig.) [de

Research on Grinding and Polishing Force Control of Compliant Flange

Directory of Open Access Journals (Sweden)

Li Chuang

2015-01-01

Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris.

Science.gov (United States)

Leite, Brisa Dos Santos; Fagundes, Nathalia Carolina Fernandes; Aragón, Mônica Lídia Castro; Dias, Carmen Gilda Barroso Tavares; Normando, David

2016-01-01

Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process. The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing. Frictional force and debris buildup on the surface of 28 premolar brackets were evaluated after orthodontic treatment. In one hemiarch, each bracket was subjected to air-powder polishing (n = 14) for five seconds, while the contralateral hemiarch (n = 14) served as control. Mechanical friction tests were performed and images of the polished bracket surfaces and control surfaces were examined. Wilcoxon test was applied for comparative analysis between hemiarches at p Brackets that had been cleaned with air-powder polishing showed lower friction (median = 1.27 N) when compared to the control surfaces (median = 4.52 N) (p orthodontic brackets with air-powder polishing significantly reduces debris buildup on the bracket surface while decreasing friction levels observed during sliding mechanics.

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

OpenAIRE

Gerda Vaitkūnaitė; Vladislav Markovič; Olegas Černašėjus

2015-01-01

The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS) method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treat...

Polish credit institutions within the European Union: a cross-country survey

Directory of Open Access Journals (Sweden)

Mariusz Dybał

2011-06-01

Full Text Available The paper presents an analysis of the Polish financial system, with regard to both the number of financial institutions and their assets over the last two decades. Data on the structure of household assets are also presented. According to the study, banks are the most important institutions in the Polish financial system. Analyzed in order to compare Polish credit institutions with all other members of the European Union were total assets of credit institutions, assets of the 25 largest banks in the European Union, as well as in Central and East Europe, share of the five largest credit institutions in total assets (CR5, asset share of credit institutions with majority foreign equity ownership, number of credit institutions, number of local units (branches, number of residents per credit institution local unit, number of employees of credit institutions, assets of credit institutions per employee and GDP per capita in PPS. The data demonstrate that over the past decade Polish credit institutions have largely strengthened their position within the European Union.

Radiological sciences in Turkey: its past, present and future

International Nuclear Information System (INIS)

Ozyar, E.

2002-01-01

After the discovery of X-rays in 1895, first X-rays was produced with an X-ray tube one year after in Istanbul and used with diagnostic and therapeutic aims thereafter. Parallel to the technological advances in radiology, radiation oncology and nuclear medicine, all kind of modern tools became available in Turkish Republic. There are two oncology institutes affiliated with major universities in Turkey currently. These institutions are located in Ankara and Istanbul and aimed for the research, education, and the application of the newest technology for the diagnosis and treatment in the field of basic and clinical oncology as well as in cancer epidemiology and prevention. Beside these comprehensive cancer centers there were more than 50 university hospitals with radiology, nuclear medicine and radiation oncology facilities in Turkey. Diagnostic and interventional radiology was widely available in university and governmental hospitals. Currently conventional X-ray techniques, ultrasonography, mammography, computed tomography, magnetic resonance imaging, was available in most of the cities. Interventional procedures are performed in most of the centers. There are more than 20 university hospitals equipped with Cobalt-60 units, linear accelerators, LDR, MDR, HDR brachytherapy, stereotactic radiosurgery, gamma knife, computerized treatment planning systems. All these departments have all facilities for precise in-vivo and in-vitro measurements mandatory for precise radiotherapy. Two comprehensive cancer centers have post graduate programs of radiation physics and treatment planning. The field of .nuclear medicine is rapidly growing in Turkey. Routine diagnostic services are given in almost every city. These diagnostic studies frequently performed include bone, renal, thyroid, lung and myocardial Perfusion, whole body Gallium scans, and other scintigraphic images such as gastrointestinal bleeding, gastroesophageal reflux, I-131-MIBG studies etc. Treatment is also

The Factor Structure of the Polish-Language Version of the Romantic Beliefs Scale

Directory of Open Access Journals (Sweden)

Katarzyna Adamczyk

2014-07-01

Full Text Available The aim of the present study was to investigate the factor structure and psychometric properties of the Polish adaptation of Romantic Beliefs Scale (RBS; Sprecher & Metts, 1989. In a sample of 414 Polish university students aged 19-25 (227 females and 187 males, the factor structure of the original English version was confirmed for the four subscales: Love Finds a Way, One and Only, Idealization, and Love at First Sight. The present study provides evidence that the 15-item version of the Polish adaptation of the (RBS possesses a factor structure and psychometric properties comparable to the English-language version of RBS. It was shown to be a reliable self-report measure for romantic beliefs within a sample of the Polish population. The development of a new Polish measure of romantic beliefs has provided further validation for the RBS, and provided evidence in support of the ideology of romanticism in various populations, and indicated the importance of differentiating between the different types of romantic beliefs.

[Comparison of surface roughness of nanofilled and microhybrid composite resins after curing and polishing].

Science.gov (United States)

Jiang, Hong; Lv, Da; Liu, Kailei; Zhang, Weisheng; Yao, Yao; Liao, Chuhong

2014-05-01

To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. P60 had the lowest Ra (0.125∓0.030 µm) followed by Z250 and Spectrum. The Ra of Z350 (0.205∓0.052 µm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches; the polished faces of Z350 presented with scratches where defects of the filling material could be seen. The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Laser polishing for topography management of accelerator cavity surfaces

Energy Technology Data Exchange (ETDEWEB)

Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2015-07-20

Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

Energy Technology Data Exchange (ETDEWEB)

Ţălu, Ştefan, E-mail: stefan_ta@yahoo.com [Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj (Romania); Stach, Sebastian, E-mail: sebastian.stach@us.edu.pl [University of Silesia, Faculty of Computer Science and Materials Science, Institute of Informatics, Department of Biomedical Computer Systems, Będzińska 39, 41-205 Sosnowiec (Poland); Lainović, Tijana, E-mail: tijana.lainovic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Vilotić, Marko, E-mail: markovil@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia); Blažić, Larisa, E-mail: larisa.blazic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Clinic of Dentistry of Vojvodina, Department of Restorative Dentistry and Endodontics, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Alb, Sandu Florin, E-mail: albflorin@yahoo.com [“Iuliu Haţieganu” University of Medicine and Pharmacy, Faculty of Dentistry, Department of Periodontology, 8 Victor Babeş St., 400012 Cluj-Napoca (Romania); Kakaš, Damir, E-mail: kakasdam@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia)

2015-03-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm{sup 2} scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D{sub q} and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α{sub max} − α{sub min}) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

International Nuclear Information System (INIS)

Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana; Vilotić, Marko; Blažić, Larisa; Alb, Sandu Florin; Kakaš, Damir

2015-01-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm 2 scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α max − α min ) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol created a better

Original article Validation of the Polish version of the Collective Self-Esteem Scale

Directory of Open Access Journals (Sweden)

Róża Bazińska

2015-07-01

Full Text Available Background The aim of this article is to present research on the validity and reliability of the Collective Self-Esteem Scale (CSES for the Polish population. The CSES is a measure of individual differences in collective self-esteem, understood as the global evaluation of one’s own social (collective identity. Participants and procedure Participants from two samples (n = 466 and n = 1,009 completed a paper-pencil set of questionnaires which contained the CSES and the Rosenberg Self-Esteem Scale (RSES, and subsets of participants completed scales related to a sense of belonging, well-being and psychological distress (anxiety and depression. Results Like the original version, the Polish version of the CSES comprises 16 items which form the four dimensions of collective self-esteem: Public collective self-esteem, Private collective self-esteem, Membership esteem and Importance of Identity. The results confirm the four-factor structure of the Polish version of the CSES, support the whole Polish version of the CSES as well as its subscales, which represent satisfactory reliability and stability, and provide initial evidence of construct validity. Conclusions As the results of the study indicate, the Polish version of the CSES is a valid and reliable self-report measure for assessing the global self-esteem derived from membership of a group and has proved to be useful in the Polish context.

Tumor del estroma gastrointestinal Tumor of the gastrointestinal stroma

Directory of Open Access Journals (Sweden)

Jorge Felipe Montero León

2012-03-01

Full Text Available Los tumores del estroma gastrointestinal, conocidos según sus siglas en inglés como GIST (gastrointestinal stromal tumors, son tumores mesenquimales que aparecen en cualquier lugar a lo largo del tracto intestinal. Este trabajo tiene el propósito de presentar una paciente de 60 años de edad que asiste a la consulta de ginecología del Instituto Nacional de Oncología y Radiobiología, por presentar dolor en el epigastrio, que se irradia al flanco derecho, con un aumento de volumen en la fosa iliaca derecha, y por ultrasonografía se plantea un tumor de ovario derecho, que se proyecta hacia el epigastrio y a hipocondrio derecho. Se describe la intervención quirúrgica y los hallazgos encontrados en estudios macro y microscópicos, así como en estudios posteriores por inmunohistoquímica de la lesión. Se concluye con un diagnóstico de tumor del estroma gastrointestinal y los resultados de las intervenciones quirúrgicas y medicamentosas realizadas. Se recomienda valorar la importancia de una estrecha relación entre cirujanos generales y ginecólogos frente a enfermedades inesperadas, por su difícil diagnóstico preoperatorio, que conllevan a un tratamiento quirúrgico adecuado, y que por la complejidad que requieren, necesitan de la competencia de ambas especialidades quirúrgicas.The tumors of the gastrointestinal stroma, known in English language as GIST (gastrointestinal stromal tumors are mesenchymal tumors appearing in any place throughout the intestinal tract. The objective of present paper is to present the case of a female patient aged 60 came to Genecology consultation of the National Institute of Oncology and Radiobiology due pain in epigastrium irradiating to right flank with increase of volume in the right iliac fossa and by ultrasonography it is a tumor of right ovarium projecting to epigastrium and the right hypochondrium. The surgical intervention is described as well as the findings noted in macro- and microscopic studies

Upper gastrointestinal bleeding in patients with CKD.

Science.gov (United States)

Liang, Chih-Chia; Wang, Su-Ming; Kuo, Huey-Liang; Chang, Chiz-Tzung; Liu, Jiung-Hsiun; Lin, Hsin-Hung; Wang, I-Kuan; Yang, Ya-Fei; Lu, Yueh-Ju; Chou, Che-Yi; Huang, Chiu-Ching

2014-08-07

Patients with CKD receiving maintenance dialysis are at risk for upper gastrointestinal bleeding. However, the risk of upper gastrointestinal bleeding in patients with early CKD who are not receiving dialysis is unknown. The hypothesis was that their risk of upper gastrointestinal bleeding is negatively linked to renal function. To test this hypothesis, the association between eGFR and risk of upper gastrointestinal bleeding in patients with stages 3-5 CKD who were not receiving dialysis was analyzed. Patients with stages 3-5 CKD in the CKD program from 2003 to 2009 were enrolled and prospectively followed until December of 2012 to monitor the development of upper gastrointestinal bleeding. The risk of upper gastrointestinal bleeding was analyzed using competing-risks regression with time-varying covariates. In total, 2968 patients with stages 3-5 CKD who were not receiving dialysis were followed for a median of 1.9 years. The incidence of upper gastrointestinal bleeding per 100 patient-years was 3.7 (95% confidence interval, 3.5 to 3.9) in patients with stage 3 CKD, 5.0 (95% confidence interval, 4.8 to 5.3) in patients with stage 4 CKD, and 13.9 (95% confidence interval, 13.1 to 14.8) in patients with stage 5 CKD. Higher eGFR was associated with a lower risk of upper gastrointestinal bleeding (P=0.03), with a subdistribution hazard ratio of 0.93 (95% confidence interval, 0.87 to 0.99) for every 5 ml/min per 1.73 m(2) higher eGFR. A history of upper gastrointestinal bleeding (Pupper gastrointestinal bleeding risk. In patients with CKD who are not receiving dialysis, lower renal function is associated with higher risk for upper gastrointestinal bleeding. The risk is higher in patients with previous upper gastrointestinal bleeding history and low serum albumin. Copyright © 2014 by the American Society of Nephrology.

Radiology research in mainland China in the past 10 years: a survey of original articles published in Radiology and European Radiology

International Nuclear Information System (INIS)

Zhang, Long Jiang; Wang, Yun Fei; Yang, Zhen Lu; Lu, Guang Ming; Schoepf, U.J.; Xu, Jiaqian; Li, Enzhong

2017-01-01

To evaluate the features and trends of Radiology research in Mainland China through bibliometric analysis of the original articles published in Radiology and European Radiology (ER) between 2006 and 2015. We reviewed the original articles published in Radiology and ER between 2006 and 2015. The following information was abstracted: imaging subspecialty, imaging technique(s) used, research type, sample size, study design, statistical analysis, study results, funding declarations, international collaborations, number of authors, department and province of the first author. All variables were examined longitudinally over time. Radiology research in Mainland China saw a substantial increase in original research articles published, especially in the last 5 years (P < 0.001). Within Mainland China's Radiology research, neuroradiology, vascular/interventional Radiology, and abdominal Radiology were the most productive fields; MR imaging was the most used modality, and a distinct geographic provenience was observed for articles published in Radiology and ER. Radiology research in Mainland China has seen substantial growth in the past 5 years with neuroradiology, vascular/interventional Radiology, and abdominal Radiology as the most productive fields. MR imaging is the most used modality. Article provenience shows a distinct geographical pattern. (orig.)

Radiology research in mainland China in the past 10 years: a survey of original articles published in Radiology and European Radiology

Energy Technology Data Exchange (ETDEWEB)

Zhang, Long Jiang; Wang, Yun Fei; Yang, Zhen Lu; Lu, Guang Ming [Medical School of Nanjing University, Department of Medical Imaging, Jinling Hospital, Nanjing, Jiangsu (China); Schoepf, U.J. [Medical School of Nanjing University, Department of Medical Imaging, Jinling Hospital, Nanjing, Jiangsu (China); Medical University of South Carolina, Division of Cardiovascular Imaging, Department of Radiology and Radiological Science, Charleston, SC (United States); Xu, Jiaqian [Medical University of South Carolina, Division of Cardiovascular Imaging, Department of Radiology and Radiological Science, Charleston, SC (United States); Li, Enzhong [National Natural Science Foundation of China, Department of Medical Science, Beijing (China)

2017-10-15

To evaluate the features and trends of Radiology research in Mainland China through bibliometric analysis of the original articles published in Radiology and European Radiology (ER) between 2006 and 2015. We reviewed the original articles published in Radiology and ER between 2006 and 2015. The following information was abstracted: imaging subspecialty, imaging technique(s) used, research type, sample size, study design, statistical analysis, study results, funding declarations, international collaborations, number of authors, department and province of the first author. All variables were examined longitudinally over time. Radiology research in Mainland China saw a substantial increase in original research articles published, especially in the last 5 years (P < 0.001). Within Mainland China's Radiology research, neuroradiology, vascular/interventional Radiology, and abdominal Radiology were the most productive fields; MR imaging was the most used modality, and a distinct geographic provenience was observed for articles published in Radiology and ER. Radiology research in Mainland China has seen substantial growth in the past 5 years with neuroradiology, vascular/interventional Radiology, and abdominal Radiology as the most productive fields. MR imaging is the most used modality. Article provenience shows a distinct geographical pattern. (orig.)

Radiological protection in interventional radiology

International Nuclear Information System (INIS)

Padovani, R.

2001-01-01

Interventional radiology (IR) reduces the need for many traditional interventions, particularly surgery, so reducing the discomfort and risk for patients compared with traditional systems. IR procedures are frequently performed by non-radiologist physicians, often without the proper radiological equipment and sufficient knowledge of radiation protection. Levels of doses to patients and staff in IR vary enormously. A poor correlation exists between patient and staff dose, and large variations of dose are reported for the same procedure. The occurrence of deterministic effects in patients is another peculiar aspect of IR owing to the potentially high skin doses of some procedures. The paper reviews the use of IR and the radiological protection of patients and staff, and examines the need for new standards for IR equipment and the training of personnel. (author)

Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano

2015-01-01

Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

The prevalence of burnout syndrome in Polish anaesthesiologists.

Science.gov (United States)

Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

2014-01-01

Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

Gastrointestinal tract

International Nuclear Information System (INIS)

James, R.D.; Pointon, R.C.S.

1985-01-01

At the time of writing, radiotherapy is of only minor use in the management of adenocarcinoma of the gastrointestinal tract, for a number of reasons. First, an exploratory laparotomy is generally needed for diagnosis, and if possible the tumour is resected or by-passed. Second, radiotherapy planning in the upper abdomen is complicated by the proximity of small bowel, kidneys, and spinal cord. Third, it has been assumed that these tumours cause death largely as a result of distant metastases, so that local radiotherapy, even if effective, would contribute little to survival. The continued interest in radiotherapy for this group of tumours arises out of the poor survival rates following surgery, which have not changed for many years, and the morbidity associated with their resection. It was hoped that the addition of cytotoxic agents to radical surgery would improve survival rates in carcinoma of the stomach and intraperitoneal colon. Despite a large number of well-organised prospective trials, using a variety of cytotoxic drugs, there is so far no evidence that the addition of chemotherapy to radical surgery improves survival for either tumour site. The authors are therefore faced with a group of tumours which are not only common, but commonly fatal and many surgeons would accept that a new approach using modern radiotherapy techniques may well be justified. There is evidence that this movement is already taking place for carcinoma of the rectum, and the indications for radiotherapy in this condition will be dealt with below. Before considering these it is worth dwelling briefly on recent changes in surgical and radiological practices which, if they fulfil expectations, might allow radiotherapy to be used for carcinoma of the colon, stomach, and pancreas as it is now used for rectal cancer

Study of Pneumatic Servo Loading System in Double-Sided Polishing

International Nuclear Information System (INIS)

Qian, N; Ruan, J; Li, W

2006-01-01

The precise double-sided polishing process is one of the main methods to get the ultra-smooth surface of workpiece. In double-sided polishing machine, a loading system is required to be able to precisely control the load superimposed on the workpiece, while the polishing is being carried out. A pneumatic servo loading system is proposed for this purpose. In the pneumatic servo system, the servo valve, which acts both the electrical to mechanical converter and the power amplifier, has a substantial influence on the performance of the loading system. Therefore a specially designed pneumatic digital servo valve is applied in the control system. In this paper, the construction of the pneumatic servo loading system in double-sided polishing machine and control strategy associated with the digital servo valve are first addressed. The mathematical model of the system established and the hardware of the pneumatic servo system is designed. Finally, the experiments are carried out by measuring the practical load on the workpiece and the quality of the surface finish. It is demonstrated that the error rate of load is less than 5% and a super-smooth surface of silicon wafer with roughness Ra 0.401 nm can be obtained

Tribochemical interaction between nanoparticles and surfaces of selective layer during chemical mechanical polishing

International Nuclear Information System (INIS)

Ilie, Filip

2013-01-01

Nanoparticles have been widely used in polish slurries such as those in the chemical mechanical polishing (CMP) process. For understanding the mechanisms of CMP, an atomic force microscope (AFM) is used to characterize polished surfaces of selective layers, after a set of polishing experiments. To optimize the CMP polishing process, one needs to get information on the interaction between the nano-abrasive slurry nanoparticles and the surface of selective layer being polished. The slurry used in CMP process of the solid surfaces is slurry with large nanoparticle size colloidal silica sol nano-abrasives. Silica sol nano-abrasives with large nanoparticle are prepared and characterized by transmission electron microscopy, particles colloidal size, and Zeta potential in this paper. The movement of nanoparticles in liquid and the interaction between nanoparticles and solid surfaces coating with selective layer are very important to obtain an atomic alloy smooth surface in the CMP process. We investigate the nanoparticle adhesion and removal processes during CMP and post-CMP cleaning. The mechanical interaction between nanoparticles and the wafer surface was studied using a microcontact wear model. This model considers the nanoparticle effects between the polishing interfaces during load balancing. Experimental results on polishing and cleaning are compared with numerical analysis. This paper suggests that during post-CMP cleaning, a combined effort in chemical and mechanical interaction (tribochemical interactions) would be effective in removal of small nanoparticles during cleaning. For large nanoparticles, more mechanical forces would be more effective. CMP results show that the removal rate has been improved to 367 nm/min and root mean square (RMS) of roughness has been reduced from 4.4 to 0.80 nm. Also, the results show that the silica sol nano-abrasives about 100 nm are of higher stability (Zeta potential is −65 mV) and narrow distribution of nanoparticle

Barriers and Limitations of Mentoring in Polish Organizations

Directory of Open Access Journals (Sweden)

Joanna Mesjasz

2013-09-01

Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

Process optimization for ultrasonic vibration assisted polishing of micro-structured surfaces on super hard material

Science.gov (United States)

Sun, Zhiyuan; Guo, Bing; Rao, Zhimin; Zhao, Qingliang

2014-08-01

In consideration of the excellent property of SiC, the ground micro-structured surface quality is hard to meet the requirement - consequently the ultrasonic vibration assisted polishing (UVAP) of micro-structures of molds is proposed in this paper. Through the orthogonal experiment, the parameters of UVAP of micro-structures were optimized. The experimental results show that, abrasive polishing process, the effect of the workpiece feed rate on the surface roughness (Ra), groove tip radius (R) and material removal rate (MRR) of micro-structures is significant. While, the UVAP, the most significant effect factor for Ra, R and MRR is the ultrasonic amplitude of the ultrasonic vibration. In addition, within the scope of the polishing process parameters selected by preliminary experiments, ultrasonic amplitude of 2.5μm, polishing force of 0.5N, workpiece feed rate of 5 mm·min-1, polishing wheel rotational speed of 50rpm, polishing time of 35min, abrasive size of 100nm and the polishing liquid concentration of 15% is the best technology of UVAP of micro-structures. Under the optimal parameters, the ground traces on the micro-structured surface were removed efficiently and the integrity of the edges of the micro-structure after grinding was maintained efficiently.

The effect of different polishing systems on surface roughness and gloss of various resin composites.

Science.gov (United States)

Da Costa, Juliana; Ferracane, Jack; Paravina, Rade D; Mazur, Rui Fernando; Roeder, Leslie

2007-01-01

The purpose of this in vitro study was to evaluate the surface finish and gloss of five direct resin composites polished with six polishing systems. One hundred and fifty disk-shaped composite specimens (D=10.0 mm, 2-mm-thick, N=30 per material) were made. One side of each specimen was finished with a 16-fluted carbide finishing bur and then polished. Five specimens of each resin composite were randomly assigned to one of the six polishing systems. The surface roughness and gloss were measured with a surface profilometer and a glossmeter. The results were analyzed by two-way analysis of variance and Tukey's t-test (pgloss values between the composites and the polishing systems (p gloss value was recorded for Supreme + Pogo; the lowest was recorded for Z100 + Jiffy. Pogo showed the highest gloss values for all composites. The nanofill (Supreme) and minifill (Esthet-X) composites presented a surface roughness comparable to a microfill (Durafill), independent of the polishing system used, and a gloss comparable to a microfill, when polished with a one-step system (Pogo). As compared with the multiple-step systems, the smoothest surfaces and the highest gloss values were achieved using the one-step system (Pogo) for all the evaluated composites.

Surface roughness of novel resin composites polished with one-step systems.

Science.gov (United States)

Ergücü, Z; Türkün, L S

2007-01-01

This study: 1) analyzed the surface roughness of five novel resin composites that contain nanoparticles after polishing with three different one-step systems and 2) evaluated the effectiveness of these polishers and their possible surface damage using scanning electron microscope (SEM) analysis. The resin composites evaluated in this study include CeramX, Filtek Supreme XT, Grandio, Premise and Tetric EvoCeram. A total of 100 discs (20/resin composites, 10 x 2 mm) were fabricated. Five specimens/resin composites cured under Mylar strips served as the control. The samples were polished for 30 seconds with PoGo, OptraPol and One Gloss discs at 15,000 rpm using a slow speed handpiece. The surfaces were tested for roughness (Ra) with a surface roughness tester and examined with SEM. One-way ANOVA was used for statistical analysis (p = 0.05). For all the composites tested, differences between the polishing systems were found to be significant (p One Gloss applications. For Grandio, Mylar and PoGo created equally smooth surfaces, while OptraPol and One Gloss produced equally rougher surfaces. Tetric EvoCeram exhibited the roughest surface with OptraPol, while no significant differences were found between Premise and CeramX. According to SEM images, OptraPol and One Gloss scratched and plucked the particles away from the surface, while PoGo created a uniform finish, although the roughness values were not the same for each composite. Effectiveness of the polishers seems to be material dependent.

Exercise and the gastro-intestinal tract

African Journals Online (AJOL)

on perfonnance and me value of cardiovascular training in improving performance in aerobic sports is well recognised. The role of me gastro-intestinal tracr, bom as a limiting and sustaining facror in aerobic exercises, is less well appreciared. Gastro-intestinal symptoms. The spectrum of gastro-intestinal effecrs of exercise ...

Reporting systems in gastrointestinal endoscopy: Requirements and standards facilitating quality improvement: European Society of Gastrointestinal Endoscopy position statement

NARCIS (Netherlands)

Bretthauer, Michael; Aabakken, Lars; Dekker, Evelien; Kaminski, Michal F.; Rösch, Thomas; Hultcrantz, Rolf; Suchanek, Stepan; Jover, Rodrigo; Kuipers, Ernst J.; Bisschops, Raf; Spada, Cristiano; Valori, Roland; Domagk, Dirk; Rees, Colin; Rutter, Matthew D.

2016-01-01

To develop standards for high quality of gastrointestinal endoscopy, the European Society of Gastrointestinal Endoscopy (ESGE) has established the ESGE Quality Improvement Committee. A prerequisite for quality assurance and improvement for all gastrointestinal endoscopy procedures is

Upper gastrointestinal bleeding treatment by methods of interventional radiology; Leczenie krwotokow z gornego odcinka przewodu pokarmowego metodami radiologii zabiegowej

Energy Technology Data Exchange (ETDEWEB)

Jargiello, T.; Szajner, M.; Janczarek, M.; Szczerbo-Trojanowska, M. [Akademia Medyczna, Lublin (Poland)

1994-12-31

The results of arterial vasopressin infusion and transcatheter embolization in 26 patients with upper gastrointestinal bleeding were presented and evaluated. In all 26 patients vasopressin infusion was performed. The procedure was successful in 21 patients. In 5 who did not respond to the therapy hemorrhage was successfully controlled by transcatheter embolization. No complications were observed. (author). 14 refs, 2 figs.

Numerical Simulation Analysis of Five-Step Variable-Diameter Pipe with Solid-Liquid Two-Phase Abrasive Flow Polishing

Science.gov (United States)

Li, Junye; Zhang, Hengfu; Wu, Guiling; Hu, Jinglei; Liu, Yang; Sun, Zhihui

2018-01-01

In many areas of precision machining abrasive flow polishing technology has an important role. In order to study the influence of abrasive flow on the polishing effect of variable diameter parts, the fifth step variable diameter tube was taken as the research object to analyze the dynamic pressure and turbulent kinetic energy distribution of inlet velocity on the fifth-order variable diameter tube influences. Through comparative analysis, the abrasive flow polished variable diameter pipe parts have very effective and significant polishing effect and the higher the inlet speed, the more significant the polishing effect.

Microstructure of pulsed-laser deposited PZT on polished and annealed MGO substrates

NARCIS (Netherlands)

King, S.L.; Coccia, L.G.; Gardeniers, Johannes G.E.; Boyd, I.W.

1996-01-01

Thin films of Lead-Zirconate-Titanate (PZT) have been grown by pulsed-laser-deposition (PLD) onto polished MgO substrates both with and without pre-annealing. The surface morphology of polished MgO substrates, which are widely used for deposition, is examined by AFM. Commercially available,

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

2015-01-01

A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor. The f...

Karol Olszewski’s 100th anniversary of death and his contribution to cryogenics (in Polish

Directory of Open Access Journals (Sweden)

Alicja RAFALSKA‑ŁASOCHA

2015-12-01

Full Text Available The article briefly presents the scientific achievements of Karol Olszewski (1846–1915, who was born when Poland did not exist on the map of Europe and Polish science was developed mainly in Krakow, Lviv and at some European Universities. In 1883 Karol Olszewski and Zygmunt Wróblewski were the first in the world to liquefy oxygen, nitrogen and carbon oxide from the atmosphere in a stable state. In 1884 Olszewski was also the first person who liquefied hydrogen in a dynamic state, achieving a record low temperature of 225 °C (48 K. In 1895 he succeeded in liquefying argon. In January 1896 Olszewski replicated the Roentgen’s set­‑up for obtaining X­‑rays and successfully obtained this newly­‑discovered radiation for the first time in Krakow, initiating the foundation of the university’s department of radiology. Olszewski died on 25 March 1915. In March 2015 the Faculty of Chemistry of the Jagiellonian University organized a special celebration to commemorate the life and achievements of Karol Olszewski.

Polish normalization of the Body Esteem Scale

Directory of Open Access Journals (Sweden)

Małgorzata Lipowska

2014-02-01

Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

[Józef Heller-one of organizers of Polish biochemistry in 1942-1973].

Science.gov (United States)

Zarebska, Zofia

2011-01-01

The article commemorates the activity of Józef Heller starting in 1921 with Jakub Parnas's group in Lvov which investigated the phosphorolysis of glycogen. The unknown events of His biography were disclosed, like military service in the Piłsudski's Legions at the rebirth of the Polish State and, subsequently, during the Nazi occupation of Poland--participation in the clandestine teaching of medical students. In the post-war times Józef Heller undertook teaching of medical students in Wrocław and next in Warsaw. In 1954 He begun to organize the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences--it now continues its activity. Professor Heller initiated the publication in Poland of three major biochemical journals, including Postepy Biochemii (1954). Thanks to His leadership the first Polish Medical Dictionary was published (1981). The article summarizes the pursuit of Józef Heller in various branches of academic life, which were and still are appreciated by subsequent generations of Polish biochemists.

Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.

Science.gov (United States)

Hmaidouch, Rim; Müller, Wolf-Dieter; Lauer, Hans-Christoph; Weigl, Paul

2014-12-01

The aim of this study was to evaluate the effect of controlled intraoral grinding and polishing on the roughness of full-contour zirconia compared to classical veneered zirconia. Thirty bar-shaped zirconia specimens were fabricated and divided into two groups (n=15). Fifteen specimens (group 1) were glazed and 15 specimens (group 2) were veneered with feldspathic ceramic and then glazed. Prior to grinding, maximum roughness depth (Rmax) values were measured using a profilometer, 5 times per specimen. Simulated clinical grinding and polishing were performed on the specimens under water coolant for 15 s and 2 N pressure. For grinding, NTI diamonds burs with grain sizes of 20 µm, 10 µm, and 7.5 µm were used sequentially. The ground surfaces were polished using NTI kits with coarse, medium and fine polishers. After each step, Rmax values were determined. Differences between groups were examined using one-way analysis of variance (ANOVA). The roughness of group 1 was significantly lower than that of group 2. The roughness increased significantly after coarse grinding in both groups. The results after glazing were similar to those obtained after fine grinding for non-veneered zirconia. However, fine-ground veneered zirconia had significantly higher roughness than venerred, glazed zirconia. No significant difference was found between fine-polished and glazed zirconia, but after the fine polishing of veneered zirconia, the roughness was significantly higher than after glazing. It can be concluded that for full-contour zirconia, fewer defects and lower roughness values resulted after grinding and polishing compared to veneered zirconia. After polishing zirconia, lower roughness values were achieved compared to glazing; more interesting was that the grinding of glazed zirconia using the NTI three-step system could deliver smooth surfaces comparable to untreated glazed zirconia surfaces.

Effects of finishing/polishing techniques on microleakage of resin-modified glass ilonomer cement restorations.

Science.gov (United States)

Yap, Adrian U J; Yap, W Y; Yeo, Egwin J C; Tan, Jane W S; Ong, Debbie S B

2003-01-01

This study investigated the effect of finishing/polishing techniques on the microleakage of resin-modified glass ionomer restorations. Class V preparations were made on the buccal and lingual/palatal surfaces of freshly extracted teeth. The cavities on each tooth were restored with Fuji II LC (FT [GC]) and Photac-Fil Quick (PF [3M-ESPE]) according to manufacturers' instructions. Immediately after light-polymerization, gross finishing was done with eight-fluted tungsten carbide burs. The teeth were then randomly divided into four groups and finishing/polishing was done with one of the following systems: (a) Robot Carbides (RC); (b) Super-Snap system (SS); (c) OneGloss (OG) and (d) CompoSite Polishers (CS). The sample size for each material-finishing/polishing system combination was eight. After finishing/polishing, the teeth were stored in distilled water at 37 degrees C for one week. The root apices were then sealed with acrylic and two coats of varnish was applied 1 mm beyond the restoration margins. The teeth were subsequently subjected to dye penetration testing (0.5% basic fuchsin), sectioned and scored. Data was analyzed using Kruskal-Wallis and Mann-Whitney U tests at a significance level of 0.05. Results of statistical analysis were as follows: Enamel margins: PF-OGpolishing technique, leakage at dentin margins was significantly greater than at enamel margins for FT. For PF, no significant difference in leakage scores was observed between dentin and enamel with the exception of finishing/polishing with OG. FT restorations had significantly less enamel and dentin leakage than PF restorations when treated with OG. The effect of finishing/polishing techniques on microleakage was both tissue and material dependent.

A new view on dam lines in Polish Arabian horses based on mtDNA analysis

Directory of Open Access Journals (Sweden)

Sell Jerzy

2007-09-01

Full Text Available Abstract Polish Arabian horses are one of the oldest and the most important Arab populations in the world. The Polish Arabian Stud Book and the Genealogical Charts by Skorkowski are the main sources of information on the ancestors of Polish Arabs. Both publications were viewed as credible sources of information until the 1990s when the data regarding one of the dam lines was questioned. The aim of the current study was to check the accuracy of the pedigree data of Polish dam lines using mtDNA analysis. The analyses of a 458 bp mtDNA D-loop fragment from representatives of 15 Polish Arabian dam lines revealed 14 distinct haplotypes. The results were inconsistent with pedigree data in the case of two lines. A detailed analysis of the historical sources was performed to explain these discrepancies. Our study revealed that representatives of different lines shared the same haplotypes. We also noted a genetic identity between some lines founded by Polish mares of unknown origin and lines established by desert-bred mares.

Iniencephaly: Radiological and pathological features of a series of three cases

Directory of Open Access Journals (Sweden)

Panduranga Chikkannaiah

2014-01-01

Full Text Available Iniencephaly is a rare form of neural tube defect with an incidence of 0.1-10 in 10,000 pregnancies. It is characterized by the presence of occipital bone defects at foramen magnum, fixed retroflexion of head, spinal dysmorphism, and lordosis of cervicothoracic vertebrae. It is usually associated with central nervous system, gastrointestinal, and cardiovascular anomalies. We present radiological and autopsy findings in a series of 3 cases of iniencephaly (gestational ages 29.3, 23, and 24 weeks first fetus in addition showed omphalocele, pulmonary hypoplasia, two lobes in right lung, accessory spleen, atrial septal defect, bilateral clubfoot, ambiguous genitalia, and single umbilical artery. Second fetus was a classical case of iniencephaly apertus with spina bifida. Third fetus had colpocephaly and bifid spine.

European Society of Gastrointestinal Endoscopy - Establishing the key unanswered research questions within gastrointestinal endoscopy

DEFF Research Database (Denmark)

Rees, Colin J; Ngu, Wee Sing; Regula, Jaroslaw

2016-01-01

Background and study aim: Gastrointestinal endoscopy is a rapidly evolving research field. The European Society of Gastrointestinal Endoscopy (ESGE) plays a key role in shaping opinion and endoscopy activity throughout Europe and further afield. Establishing key unanswered questions within the fi...

Great Britain and German-Polish Relations, 1929–1931

Directory of Open Access Journals (Sweden)

Zotova Ekaterina

2014-12-01

Full Text Available The article deals with the study of British-German relations during the period of exacerbation of territorial disputes between Germany and Poland in 1929-1931. Germany was making plans for revising the eastern borders. It sought to enlist the support of the new Labour government. Britain didn’t only approve of Germany's intention to carry out revision of the Treaty of Versailles (reparation issue, the evacuation of the Rhineland and the change in the German-Polish border, but also supported the strengthening of the political and economic situation in Germany as a whole. Assistance to Germany was advantageous for Britain. Firstly, the British support helped to improve the capacity of the purchasing power of the German market as one of the traditional markets of the English sale. Secondly, the strengthening of the position of the German cabinet meant failure of the French policy in Europe at this stage. The defeat of France in a dispute on the issue of early evacuation of the Rhineland would seriously devalue the foreign policy initiatives of Paris. Thirdly, the British government hoped that Germany will go into orbit of British political influence. The identity of the positions of the German and the British cabinets were considered as the components of British policy success not only in relations with France and Italy, but also with Czechoslovakia and Poland. Since the formation of the MacDonald’s cabinet, anti-Polish moods increased in the British course for the settlement of German-Polish relations. However, the threat of an attack on Poland by Germany was regarded by the government of Britain as unacceptable way of resolving the German-Polish conflict. Britain tried to follow the traditional foreign policy concept of “balance of power”, but the inefficiency of British policy “mediation” in European affairs was clearly shown in times of growing financial and economic crisis. The issue of the German-Polish border remained unsolved.

E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

Directory of Open Access Journals (Sweden)

Joanna Papińska-Kacperek

2013-07-01

Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

Chemical polishing of epitoxial silicon wafer

International Nuclear Information System (INIS)

Osada, Shohei

1978-01-01

SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

General Employee Radiological Training and Radiological Worker Training: Program management manual

International Nuclear Information System (INIS)

1992-10-01

This manual defines and describes the DOE General Employee Radiological Training (GERT) and Radiological Worker I and II (RW I and II) Training programs. It includes material development requirements, standards and policies, and program administration. This manual applies to General Employee Radiological Training and Radiological Worker Training at all DOE contractor sites. The training materials of both GERT and RW I and II training reflect the requirements identified in the DOE Radiological Control Manual and DOE Order 5480.11. The training programs represent the minimum requirement for the standardized core materials. Each contractor shall implement the program in its entirety and may augment the standardized core materials to increase the general employee and radiological worker level of competency

Guidelines for the diagnosis and treatment of acute non-variceal upper gastrointestinal bleeding (2015, Nanchang, China).

Science.gov (United States)

Bai, Yu; Li, Zhao Shen

2016-02-01

Acute non-variceal upper gastrointestinal bleeding (ANVUGIB) is one of the most common medical emergencies in China and worldwide. In 2009, we published the "Guidelines for the diagnosis and treatment of acute non-variceal upper gastrointestinal bleeding" for the patients in China; however, during the past years numerous studies on the diagnosis and treatment of ANVUGIB have been conducted, and the management of ANVUGIB needs to be updated. The guidelines were updated after the databases including PubMed, Embase and CNKI were searched to retrieve the clinical trials on the management of ANVUGIB. The clinical trials were evaluated for high-quality evidence, and the advances in definitions, diagnosis, etiology, severity evaluation, treatment and prognosis of ANVUGIB were carefully reviewed, the recommendations were then proposed. After several rounds of discussions and revisions among the national experts of digestive endoscopy, gastroenterology, radiology and intensive care, the 2015 version of "Guidelines for the diagnosis and treatment of acute non-variceal upper gastrointestinal bleeding" was successfully developed by the Chinese Journal of Internal Medicine, National Medical Journal of China, Chinese Journal of Digestion and Chinese Journal of Digestive Endoscopy. It shall be noted that although much progress has been made, the clinical management of ANVUGIB still needs further improvement and refinement, and high-quality randomized trials are required in the future. © 2016 Chinese Medical Association Shanghai Branch, Chinese Society of Gastroenterology, Renji Hospital Affiliated to Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.

Strategy of the Polish policy in the final phase of the Second world war

Directory of Open Access Journals (Sweden)

L. P. Shvab

2014-09-01

Full Text Available The problems of strategy formation of the Polish government, which was in emigration, during the Second World War in the period of the eastern front approaching to the Polish borders, are found out in the article. The author confirms that the success of the Red Army made London government to rise a question about the Polish eastern border and legitimacy of London government on the liberated territories. Both questions did not have the solution in the way of traditional Polish policy. Joseph Stalin expected concession in the issue of the eastern border instead of loyalty to the London government. But Polish government did not accept accomplished facts. The ambassadors Stanislav Kot, later Tadeush Romer negotiated and insisted on returning of the western Ukrainian and Byelorussian lands. They proposed military cooperation with the Polish Home Army, which supposed to be strong enough for diversionary acts. After the battle of Stalingrad victory and that resonance, which it had made in the world, Stalin refused from such cooperation, he thought that Poland was too weak partner. Stalin continued the escalation of the relations, he consciously stopped all diplomatic relations, flatly refused to continue discussion about borders and changed the way of discussion about the legitimacy of the authentic authority in Poland.

Effect of prophylactic polishing protocols on the surface roughness of esthetic restorative materials.

Science.gov (United States)

Neme, A L; Frazier, K B; Roeder, L B; Debner, T L

2002-01-01

Many polishing protocols have been evaluated in vitro for their effect on the surface roughness of restorative materials. These results have been useful in establishing protocols for in vivo application. However, limited research has focused on the subsequent care and maintenance of esthetic restorations following their placement. This investigation evaluated the effect of five polishing protocols that could be implemented at recall on the surface roughness of five direct esthetic restorative materials. Specimens (n=25) measuring 8 mm diameter x 3 mm thick were fabricated in an acrylic mold using five light-cured resin-based materials (hybrid composite, microfilled composite, packable composite, compomer and resin-modified glass ionomer). After photopolymerization, all specimens were polished with Sof-Lex Disks to produce an initial (baseline) surface finish. All specimens were then polished with one of five prophylactic protocols (Butler medium paste, Butler coarse paste, OneGloss, SuperBuff or OneGloss & SuperBuff). The average surface roughness of each treated specimen was determined from three measurements with a profilometer (Surface 1). Next, all specimens were brushed 60,000 times at 1.5 Hz using a brush-head force of 2 N on a Manly V-8 cross-brushing machine in a 50:50 (w/w) slurry of toothpaste and water. The surface roughness of each specimen was measured after brushing (Surface 2) followed by re-polishing with one of five protocols, then final surface roughness values were determined (Surface 3). The data were analyzed using repeated measures ANOVA. Significant differences (p=0.05) in surface roughness were observed among restorative materials and polishing protocols. The microfilled and hybrid resin composite yielded significantly rougher surfaces than the other three materials following tooth brushing. Prophylactic polishing protocols can be used to restore a smooth surface on resin-based esthetic restorative materials following simulated tooth

Electroluminescence Analysis by Tilt Polish Technique of InP-Based Semiconductor Lasers

Science.gov (United States)

Ichikawa, Hiroyuki; Sasaki, Kouichi; Hamada, Kotaro; Yamaguchi, Akira

2010-03-01

We developed an effective electroluminescence (EL) analysis method to specify the degraded region of InP-based semiconductor lasers. The EL analysis method is one of the most important methods for failure analysis. However, EL observation was difficult because opaque electrodes surround an active layer. A portion of each electrode had to be left intact for wiring to inject the current. Thus, we developed a partial polish technique for the bottom electrode. Tilt polish equipment with a rotating table was introduced; a flat polished surface and a sufficiently wide remaining portion of the bottom electrode were obtained. As a result, clear EL from the back surface of the laser was observed.

Sword of Christ. Christian inspirations of Polish socialism before the January Uprising

Directory of Open Access Journals (Sweden)

Piotr Kuligowski

2012-06-01

Full Text Available The article presents the history of the Christian fraction of Polish socialism against the background of the era, from the very beginning until its end after the January Uprising. On the basis of the texts from the era the understanding of socialism, the principles of the program of Clusters of the Polish People and the anatomy of Fr. Piotr Ściegienny’s conspiracy have been reconstructed. The text reproduces the utopian ideas of social reconstruction by Zenon Świętosławski and Ludwik Królikowski and based on these the text also shows the place of Christian socialism in the Polish socialist thought.

Relationship Between Competitive Strategies and the Success Perception of Polish Born Globals

Directory of Open Access Journals (Sweden)

Baranowska-Prokop Ewa

2014-09-01

Full Text Available The key objective of this paper is to describe and evaluate the competitive strategies applied by Polish born global enterprises. To reveal these strategies, two competitive models developed by M.E. Porter are applied to an original data set obtained from 256 small and medium Polish enterprises through a survey employing the CATI technique. The outcomes of these strategies, as perceived by the companies applying them, are also evaluated against two hypotheses. We conclude that Polish firms apply both basic strategies of competition, i.e. cost leadership strategies and differentiation strategies and that a substantial majority of companies perceive themselves to have succeeded on the market.

Gastric Mucosal Erosions - Radiologic evaluation -

International Nuclear Information System (INIS)

Kim, Seung Hyup

1985-01-01

70 cases of gastric mucosal erosions were diagnosed by double contrast upper gastrointestinal examinations and endoscopic findings. Analyzing the radiologic findings of these 70 cases of gastric mucosal erosions, the following results were obtained. 1. Among the total 70 cases, 65 cases were typical varioliform erosions showing central depressions and surrounding mucosal elevations. Remaining 5 cases were erosions of acute phase having multiple irregular depressions without surrounding elevations. 2. The gastric antrum was involved alone or in part in all cases. Duodenal bulb was involved with gastric antrum in 4 cases. 3. The majority of the cases had multiple erosions. There were only 2 cases of single erosion. 4. In 65 cases of varioliform erosions; 1) The diameter of the surrounding elevations varied from 3 to 20 mm with the majority (47 cases) between 6 and 10 mm. 2) In general, the surrounding elevations with sharp margin on double contrast films were also clearly demonstrated on compression films but those with faint margin were not. 3) The size of the central barium collections varied from pinpoint to 10 mm with the majority under 5 mm. The shape of the central barium collections in majority of the cases were round with a few cases of linear, triangular or star-shape. 5. In 5 cases of acute phase erosions; 1) All the 5 cases were females. 2) On double contrast radiography, all the cases showed multiple irregular depressed lesions without surrounding elevations. 3) 1 case had the history of hematemesis. 4) In 1 case, there was marked radiological improvement on follow-up study of 2 months interval. 6. In 23 cases, there were coexistent diseases with gastric mucosal erosions. These were 13 cases of duodenal bulb ulcers,7 cases of benign gastric ulcers and 3 others

Polish students’ opinion about medicinal cannabis

Directory of Open Access Journals (Sweden)

Rafał Mazur

2017-09-01

Conclusions: Polish students seem to be ready for introduction into medical marijuana and are aware of its therapeutic potential. The majority is in favor of sales in a controlled manner. The task of researchers should be accurate examination of the effectiveness of specific cannabinoids in the treatment of diseases.

Stress 'deafness' in a language with fixed word stress: an ERP study on Polish

Directory of Open Access Journals (Sweden)

Ulrike eDomahs

2012-11-01

Full Text Available The aim of the present contribution was to examine the factors influencing the prosodic processing in a language with predictable word stress. For Polish, a language with fixed penultimate stress but several well-defined exceptions, difficulties in the processing and representation of prosodic information have been reported (e.g., Peperkamp & Dupoux, 2002. The present study utilized event-related potentials (ERPs to investigate the factors influencing prosodic processing in Polish. These factors are i the predictability of stress and ii the prosodic structure in terms of metrical feet. Polish native speakers were presented with correctly and incorrectly stressed Polish words and instructed to judge the correctness of the perceived stress patterns. For each stress violation an early negativity was found which was interpreted as reflection of an error-detection mechanism, and in addition exceptional stress patterns (= antepenultimate stress and post-lexical (= initial stress evoked a task-related positivity effect (P300 whose amplitude and latency is correlated with the degree of anomaly and deviation from an expectation. Violations involving the default (= penultimate stress in contrast did not produce such an effect. This asymmetrical result is interpreted to reflect that Polish native speakers are less sensitive to the default pattern than to the exceptional or post-lexical patterns. Behavioral results are orthogonal to the electrophysiological results showing that Polish speakers had difficulties to reject any kind of stress violation. Thus, on a meta-linguistic level Polish speakers appeared to be stress-‘deaf’ for any kind of stress manipulation, whereas the neural reactions differentiate between the default and lexicalized patterns.

Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits

Directory of Open Access Journals (Sweden)

DOMINIKA GUZEK

2016-06-01

Full Text Available Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits.

Science.gov (United States)

Guzek, Dominika; Głąbska, Dominika; Głąbski, Krzysztof; Wierzbicka, Agnieszka

2016-05-31

Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

Directory of Open Access Journals (Sweden)

Gerda Vaitkūnaitė

2015-03-01

Full Text Available The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treated and untreated areas of the material has been made.

[Fifty years of the Polish School of Medicine at the University of Edinburgh (1941-1991)].

Science.gov (United States)

Tomaszewski, W

1994-01-01

The Polish School of Medicine at the University of Edinburgh started in 1941 on the initiative of the University. It was destined for soldier-students in the Polish Forces in Great Britain. This academic institution, unique in the history of universities, was a joint Scottish-Polish enterprise. An Agreement was concluded between the Polish Government in London and the University of Edinburgh. The School was an independent Polish academic institution and, at the same time, an integral part of the University of Edinburgh. The students matriculated at the University. The University provided all the laboratory and clinical facilities necessary for teaching. Due to a lack of Polish professors for some chairs a few of them were held by Scottish professors. Attached to them were Polish lecturers but the examinations were then held in English. The diploma, originally valid only in Poland, became recognised in Great Britain following an Act of Parliament in 1947. There were 337 students, a number of them women. 227 obtained the degree M.B., Ch.B. The war ended in 1945. The School continued up till 1949. Poland was not free. The Nazi occupation of Poland was replaced by Soviet domination which was to last for over 40 years. Only 22 of the graduates returned home, about 100 settled in G. Britain, another 100 dispersed world wide. The "magnanimous gesture" of the University of Edinburgh was thereafter remembered with gratitude by the members of the Polish School. In 1961, on the occasion of the 20th anniversary of the School, the first reunion of the graduates was organised in Birmingham for those settled in Gr. Britain. The success of the reunion prompted decision on organising annual "English" gatherings of the Polish graduates in Gr. Britain. The first world reunion of the graduates took place in Edinburgh in 1966, attracting a large number of participants on this occasion of the 25th anniversary of the School. That immensely successful anniversary of the Polish School

Radiology responsibilities post NPSA guidelines for nasogastric tube insertion: A single centre review

International Nuclear Information System (INIS)

Snaith, Beverly; Flintham, Kevin

2015-01-01

Background: There are well-recognised complications associated with malposition of nasogastric (NG) tubes. In 2011 the UK National Patient Safety Agency (NPSA) published an alert regarding their insertion and position confirmation. This alert also identified the expected radiology standards for both image acquisition and reporting. Method: This was a retrospective review of referrals over a six-month period within a multi-site NHS Trust. A consecutive sampling approach was used and radiology reports where the text included the terms “NG tube”, “nasogastric” or “feeding” were included. Data were collected from the radiology information system and NG tube visibility and image quality were confirmed by two independent reviewers. Results: 1137 examinations demonstrated an NG tube, of which 68.3% were performed to check tube position. There was statistically significant correlation between lower radiation exposure and non-visualisation (Fishers exact test, p < 0.001). The number of examinations with higher exposure index (EI) in the NG check cohort suggests that the radiographer increased the exposure to improve visualization (x 2  = 2.846; 95% CI; p = 0.046), although the utility of this is unproven. Malplaced tubes were demonstrated either in the respiratory tract (1.8%) or proximal gastrointestinal tract (8.6%) as a result of insufficient length introduced. Conclusion: The prompt acquisition and reporting of radiographs is essential to reduce the risk of NG tube complications. Respiratory tract misplacement rates were in line with the published literature, but this study does raise concern regarding the number of tubes located in the proximal GI tract. Radiology's responsibility in accurate and effective reporting of medical interventions is significant

Clear and compelling evidence: the Polish tribunal on abortion rights.

Science.gov (United States)

Girard, Françoise; Nowicka, Wanda

2002-05-01

On 25 July 2001 the Polish Federation for Women and Family Planning organised a Tribunal on Abortion Rights in Warsaw, to publicize the negative consequences of the criminalization of abortion in Poland. A panel of Polish and foreign experts heard the testimonials of seven Polish women's experiences under the 1993 "Anti-Abortion Act". Only two of the seven women were able to tell their stories in person. One died in 2001, at the age of 21, of an unsafe abortion. One is legally blind after having carried her last pregnancy to term. One is in prison for infanticide, which in all likelihood was committed by her boyfriend. National and foreign journalists were in attendance, as well as observers from all walks of life--writers, students, mothers, activists, feminists, husbands. The evidence was clear and compelling. Restrictive abortion laws make abortion unsafe by pushing it underground, endanger women's health, create a climate where even those services that are allowed by law-become unavailable, and contravene standards set by international human rights law. The restrictive abortion law in Poland has not increased the number of births; it has only caused women and their families suffering. The Tribunal brought the issue of abortion into the media prior to an election campaign and galvanised Polish and other Eastern European women's groups to become more active in defence of abortion rights.

Fracking in the Polish press: Geopolitics and national identity

International Nuclear Information System (INIS)

Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

2014-01-01

In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

Foreign bodies in gastrointestinal tract

Directory of Open Access Journals (Sweden)

Ayşe Kefeli

2014-03-01

Full Text Available Objective: Ingested foreign bodies in gastrointestinal tract are a common event which can cause serious morbidity and mortality in the children and adult population. For this reason, early diagnosis and treatment are crucial for preventing these life threatening complications. In this study, we aimed to analyze the characteristics of the patients with upper gastrointestinal foreign bodies that were treated in our department. Methods: Patients diagnosed with upper gastrointestinal foreign bodies who were admitted to our hospital between February 2010 and August2013 were evaluated retrospectively. The data regarding their age, gender, clinical profile, type and localization of the esophageal foreign body, performed endoscopic procedure and initial symptoms of the patients were noted and analyzed statistically. Results: Thirty-eight patients with a diagnosis of gastrointestinal foreign body were included in this study. Of these patients, 21 were male and 17 were female. The youngest patient was 17 years old and the oldest patient was 79 years old. Most of the foreign bodies (%55.3 detected in the stomach. Food waste and metallic objects in 21 and 16 patients respectively. The most common complaint was dysphagia (%50. After endoscopic intervention three of the patients were directed to surgery. Conclusion: Early recognition and treatment of gastrointestinal foreign bodies is important as their complications are life threatening. The best method of removal of foreign bodies is controversial. Early management with upper gastrointestinal endoscopy is the most efficient and safe treatment method in current conditions.

Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites.

Science.gov (United States)

Paravina, Rade D; Roeder, Leslie; Lu, Huan; Vogel, Karin; Powers, John M

2004-08-01

To evaluate the effects of different finishing and polishing procedures on surface roughness, gloss and color of five resin composites: two experimental microhybrid composites - FZ-Dentin (FZD) and FZ-Enamel (FZE), one commercial microhybrid composite - Esthet-X (EX), and two microfilled composites - Heliomolar (HM) and Renamel Microfill (RM). Surface roughness, gloss and color of the disc-shaped specimens (10 mm in diameter and 2-mm thick) were measured as Mylar (baseline), 16-fluted carbide bur and polishing were completed. Sixteen specimens of each composite were randomized to four groups of four. After finishing with a 16-fluted finishing bur, each group was polished by a different system: 1. Astropol (A), 2. Sof-lex disc (S), 3. Po-Go (P), 4. Enhance (E). Average surface roughness (Ra) was measured with a profilometer. Gloss measurements were performed using small-area glossmeter, while color coordinate values were recorded using a spectrophotometer. A deltaE*abgloss ranked according to polishing system (for all five composites together) was: P > E > A > S. The order of gloss values for the polished composites (for each of four polishing systems) was: RM > FZD > FZE > HM > EX. Fisher's PLSD intervals at the 0.05 level of significance for comparisons of means of surface roughness among five composites and four polishing systems were 0.01 and 0.01 microm, respectively. Fisher's PLSD intervals at the 0.05 level of significance for comparisons of means of gloss among five composites and four polishing systems were 6 and 5 GU, respectively. Color differences (deltaE*ab) among five composites and four polishing methods were found to range from 0.2 to 1.1.

Word Boundaries in L2 Speech: Evidence from Polish Learners of English

Science.gov (United States)

Schwartz, Geoffrey

2016-01-01

Acoustic and perceptual studies investgate B2-level Polish learners' acquisition of second language (L2) English word-boundaries involving word-initial vowels. In production, participants were less likely to produce glottalization of phrase-medial initial vowels in L2 English than in first language (L1) Polish. Perception studies employing word…

Sleep Dysfunction and Gastrointestinal Diseases.

Science.gov (United States)

Khanijow, Vikesh; Prakash, Pia; Emsellem, Helene A; Borum, Marie L; Doman, David B

2015-12-01

Sleep deprivation and impaired sleep quality have been associated with poor health outcomes. Many patients experience sleep disturbances, which can increase the risk of medical conditions such as hypertension, obesity, stroke, and heart disease as well as increase overall mortality. Recent studies have suggested that there is a strong association between sleep disturbances and gastrointestinal diseases. Proinflammatory cytokines, such as tumor necrosis factor, interleukin-1, and interleukin-6, have been associated with sleep dysfunction. Alterations in these cytokines have been seen in certain gastrointestinal diseases, such as gastroesophageal reflux disease, inflammatory bowel disease, liver disorders, and colorectal cancer. It is important for gastroenterologists to be aware of the relationship between sleep disorders and gastrointestinal illnesses to ensure good care for patients. This article reviews the current research on the interplay between sleep disorders, immune function, and gastrointestinal diseases.

Scintigraphic evaluation of gastrointestinal bleeding

International Nuclear Information System (INIS)

Park, Yong Tai; Lee, Choon Keun; Lee, Sun Wha; Choi, Woo Suk; Yoon, Yup; Lim, Jae Hoon

1988-01-01

Gastrointestinal bleeding remains a major diagnostic problem. Although advances have been made in the medical and surgical methods of managing gastrointestinal bleeding, the commonly employed techniques of barium radiography, endoscopy, and angiography may not successfully localize the site and define the cause of gastrointestinal bleeding. Two widely available technetium-99m-labeled radiopharmaceuticals, sulfur colloid and red blood cells are currently used in the evaluation of patients who are bleeding from the gastrointestinal tract. Surgically confirmed 19 patients with use of 99m Tc-sulfur colloid (7 cases) and 99m Tc-RBC (12 cases) were retrospectively evaluated. The overall sensitivity of scintigraphy in detection of bleeding and localization of bleeding site was 68% and 84%, respectively. The authors conclude that bleeding scintigraphy is a safe, sensitive, and non-invasive method as an effective screening test before performing angiography or surgery.

Optimized pre-thinning procedures of ion-beam thinning for TEM sample preparation by magnetorheological polishing.

Science.gov (United States)

Luo, Hu; Yin, Shaohui; Zhang, Guanhua; Liu, Chunhui; Tang, Qingchun; Guo, Meijian

2017-10-01

Ion-beam-thinning is a well-established sample preparation technique for transmission electron microscopy (TEM), but tedious procedures and labor consuming pre-thinning could seriously reduce its efficiency. In this work, we present a simple pre-thinning technique by using magnetorheological (MR) polishing to replace manual lapping and dimpling, and demonstrate the successful preparation of electron-transparent single crystal silicon samples after MR polishing and single-sided ion milling. Dimples pre-thinned to less than 30 microns and with little mechanical surface damage were repeatedly produced under optimized MR polishing conditions. Samples pre-thinned by both MR polishing and traditional technique were ion-beam thinned from the rear side until perforation, and then observed by optical microscopy and TEM. The results show that the specimen pre-thinned by MR technique was free from dimpling related defects, which were still residual in sample pre-thinned by conventional technique. Nice high-resolution TEM images could be acquired after MR polishing and one side ion-thinning. MR polishing promises to be an adaptable and efficient method for pre-thinning in preparation of TEM specimens, especially for brittle ceramics. Copyright © 2017 Elsevier B.V. All rights reserved.

The role of endoscopy in pediatric gastrointestinal bleeding

Science.gov (United States)

Franke, Markus; Geiß, Andrea; Greiner, Peter; Wellner, Ulrich; Richter-Schrag, Hans-Jürgen; Bausch, Dirk; Fischer, Andreas

2016-01-01

Background and study aims: Gastrointestinal bleeding in children and adolescents accounts for up to 20 % of referrals to gastroenterologists. Detailed management guidelines exist for gastrointestinal bleeding in adults, but they do not encompass children and adolescents. The aim of this study was to assess gastrointestinal bleeding in pediatric patients and to determine an investigative management algorithm accounting for the specifics of children and adolescents. Patients and methods: Pediatric patients with gastrointestinal bleeding admitted to our endoscopy unit from 2001 to 2009 (n = 154) were identified. Retrospective statistical and neural network analysis was used to assess outcome and to determine an investigative management algorithm. Results: The source of bleeding could be identified in 81 % (n = 124/154). Gastrointestinal bleeding was predominantly lower gastrointestinal bleeding (66 %, n = 101); upper gastrointestinal bleeding was much less common (14 %, n = 21). Hematochezia was observed in 94 % of the patients with lower gastrointestinal bleeding (n = 95 of 101). Hematemesis (67 %, n = 14 of 21) and melena (48 %, n = 10 of 21) were associated with upper gastrointestinal bleeding. The sensitivity and specificity of a neural network to predict lower gastrointestinal bleeding were 98 % and 63.6 %, respectively and to predict upper gastrointestinal bleeding were 75 % and 96 % respectively. The sensitivity and specifity of hematochezia alone to predict lower gastrointestinal bleeding were 94.2 % and 85.7 %, respectively. The sensitivity and specificity for hematemesis and melena to predict upper gastrointestinal bleeding were 82.6 % and 94 %, respectively. We then developed an investigative management algorithm based on the presence of hematochezia and hematemesis or melena. Conclusions: Hematochezia should prompt colonoscopy and hematemesis or melena should prompt esophagogastroduodenoscopy. If no

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.

1993-05-01

New machining and polishing techniques have been developed for large barium fluoride scintillating crystals that provide crystalline surfaces without sub-surface damage or deformation as verified by Atomic Force Microscopy (AFM) and Rutherford Back-scattering (RBS) analyses. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large crystal samples. Mass production techniques have also been developed for machining and polishing up to five 50 cm long crystals at one time. We present this technology along with surface studies of barium fluoride crystals polished with this technique. This technology is applicable for a number of new crystal detectors proposed at Colliders including the Barium Fluoride Electromagnetic Calorimeter at SSC, the Crystal Clear Collaboration's cerium fluoride calorimeter at LHC, and the KTeV and PHENIX scintillating hodoscopes at Fermilab, and RHIC, respectively. Lawrence Livermore National Laboratory (LLNL) has an active program of study on barium fluoride scintillating crystals for the Barium Fluoride Electromagnetic Calorimeter Collaboration and cerium fluoride and lead fluoride for the Crystal Clear Collaboration. This program has resulted in a number of significant improvements in the mechanical processing, polishing and coating of fluoride crystals. Techniques have been developed using diamond-loaded pitch lapping that can produce 15 angstrom RMS surface finishes over large areas. Also, special polishing fixtures have been designed based on mounting technology developed for the 1.1 m diameter optics used in LLNL's Nova Laser. These fixtures allow as many as five 25--50 cm long crystals to be polished and lapped at the same time with tolerances satisfying the stringent requirements of crystal calorimeters. We also discuss results on coating barium fluoride with UV reflective layers of magnesium fluoride and aluminum

OSSM2008 Polish Moessbauer Community Meeting: Program, Abstracts and List of Participants

International Nuclear Information System (INIS)

2008-01-01

The Polish Moessbauer Community Meeting - OSSM2008 has been organized by Polish scientists using the Moessbauer spectroscopy in their research. Main subjects of the meeting are investigations of modern materials electronic structure by means of Moessbauer effect (ME), using ME in biological test of tissue diseases and ME investigation of physical properties of different steels

Mechanical polishing as an improved surface treatment for platinum screen-printed electrodes

Directory of Open Access Journals (Sweden)

Junqiao Lee

2016-07-01

Full Text Available The viability of mechanical polishing as a surface pre-treatment method for commercially available platinum screen-printed electrodes (SPEs was investigated and compared to a range of other pre-treatment methods (UV-Ozone treatment, soaking in N,N-dimethylformamide, soaking and anodizing in aqueous NaOH solution, and ultrasonication in tetrahydrofuran. Conventional electrochemical activation of platinum SPEs in 0.5 M H2SO4 solution was ineffective for the removal of contaminants found to be passivating the screen-printed surfaces. However, mechanical polishing showed a significant improvement in hydrogen adsorption and in electrochemically active surface areas (probed by two different redox couples due to the effective removal of surface contaminants. Results are also presented that suggest that SPEs are highly susceptible to degradation by strong acidic or caustic solutions, and could potentially lead to instability in long-term applications due to continual etching of the binding materials. The ability of SPEs to be polished effectively extends the reusability of these traditionally “single-use” devices. Keywords: Screen-printed electrodes, Polishing, Platinum, Activation, Pre-treatment, Cyclic voltammetry

ECONOMIC CRISES – GLOBAL AND LOCAL – IN REFLECTION OF POLISH PRESS

Directory of Open Access Journals (Sweden)

Krzysztof Gibek

2010-01-01

Full Text Available One of the sociological features of the current economic crises had been its beginning as a media fact rather than economic reality for ordinary people in Poland. Until the very end of 2008 the offi cial strategy of Polish government was denying of present of any economic crises in Poland: “The Polish economy as well as Polish banking system are used to be healthy and in good conditions and we will be suffer a little slow done because we are not an island”. Unfortunately it occurs not to be true.Based on discourse analysis of two major Polish daily and two weekly we would like to show the evolution of narrative describing crises in global terms and particularly at the domestic market. What was the picture of global crises at the beginning of this discussion, how it supposed to affect Poland, who serve as experts and opinion givers and finally how through the language we can observe the change from ‘slow down’ to ‘crises’? This are basic questions we would like to answer in our text.

Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

Science.gov (United States)

Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

2013-07-01

To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

Development of clean chemical mechanical polishing systems; Clean CMP system

Energy Technology Data Exchange (ETDEWEB)

Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

1998-10-20

Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications.

Science.gov (United States)

Brunot-Gohin, C; Duval, J-L; Azogui, E-E; Jannetta, R; Pezron, I; Laurent-Maquin, D; Gangloff, S C; Egles, C

2013-09-01

Ceramics are widely used materials for prosthesis, especially in dental fields. Despite multiple biomedical applications, little is known about ceramic surface modifications and the resulting cell behavior at its contact. The aim of this study is to evaluate the biological response of polished versus glazed surface treatments on lithium disilicate dental ceramic. We studied a lithium disilicate ceramic (IPS e.max(®) Press, Ivoclar Vivadent) with 3 different surface treatments: raw surface treatment, hand polished surface treatment, and glazed surface treatment (control samples are Thermanox(®), Nunc). In order to evaluate the possible modulation of cell response at the surface of ceramic, we compared polished versus glazed ceramics using an organotypic culture model of chicken epithelium. Our results show that the surface roughness is not modified as demonstrated by equivalent Ra measurements. On the contrary, the contact angle θ in water is very different between polished (84°) and glazed (33°) samples. The culture of epithelial tissues allowed a very precise assessment of histocompatibility of these interfaces and showed that polished samples increased cell adhesion and proliferation as compared to glazed samples. Lithium disilicate polished ceramic provided better adhesion and proliferation than lithium disilicate glazed ceramic. Taken together, our results demonstrate for the first time, how it is possible to use simple surface modifications to finely modulate the adhesion of tissues. Our results will help dental surgeons to choose the most appropriate surface treatment for a specific clinical application, in particular for the ceramic implant collar. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Radiology and fine art.

Science.gov (United States)

Marinković, Slobodan; Stošić-Opinćal, Tatjana; Tomić, Oliver

2012-07-01

The radiologic aesthetics of some body parts and internal organs have inspired certain artists to create specific works of art. Our aim was to describe the link between radiology and fine art. We explored 13,625 artworks in the literature produced by 2049 artists and found several thousand photographs in an online image search. The examination revealed 271 radiologic artworks (1.99%) created by 59 artists (2.88%) who mainly applied radiography, sonography, CT, and MRI. Some authors produced radiologic artistic photographs, and others used radiologic images to create artful compositions, specific sculptures, or digital works. Many radiologic artworks have symbolic, metaphoric, or conceptual connotations. Radiology is clearly becoming an original and important field of modern art.

Is hypochondriasis a significant problem among polish adolescents? An attempt of assessment of severe form of health anxiety in polish population

Directory of Open Access Journals (Sweden)

Janusz Kocjan

2017-08-01

[Conclusions] The study provides evidence about moderate intensification of health anxiety among polish adolescent. Health anxiety level was significantly higher among medical students versus non-medical students group.

Radiological protection of patients in diagnostic and interventional radiology, nuclear medicine and radiotherapy. Contributed papers

International Nuclear Information System (INIS)

2001-01-01

An International Conference on the Radiological Protection of Patients in Diagnostic and Interventional Radiology, Nuclear Medicine and Radiotherapy organized by the International Atomic Energy Agency and co-sponsored by the European Commission, the Pan American Health Organization and the World Health Organization was held in Malaga, Spain, from 26 to 30 March 2001. The Government of Spain hosted this Conference through the Ministerio de Sanidad y Consumo, the Consejo de Seguridad Nuclear, the Junta de Andalucia, the Universidad de Malaga and the Grupo de Investigacion en Proteccion Radiologica de la Universidad de Malaga (PRUMA). The Conference was organized in co-operation with the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), the International Commission on Radiological Protection (ICRP) and the following professional societies: International Organization of Medical Physicists (IOMP), International Radiation Protection Association (IRPA), International Society of Radiation Oncology (ISRO), International Society of Radiology (ISR), International Society of Radiographers and Radiological Technologists (ISRRT) and World Federation of Nuclear Medicine and Biology (WFNMB). This publication contains contributed papers submitted to the Conference Programme Committee. The papers are in one of the two working languages of this Conference, English and Spanish. The topics covered by the Conference are as follows: Radiological protection of patients in general diagnostic radiology (radiography), Radiological protection of patients in general diagnostic radiology (fluoroscopy), Radiological protection issues in specific uses of diagnostic radiology, such as mammography and computed tomography (with special consideration of the impact of digital techniques), Radiological protection in interventional radiology, including fluoroscopy not carried out by radiologists, Radiological protection of patients in nuclear medicine, Developing and

Radiological protection of patients in diagnostic and interventional radiology, nuclear medicine and radiotherapy. Contributed papers

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

An International Conference on the Radiological Protection of Patients in Diagnostic and Interventional Radiology, Nuclear Medicine and Radiotherapy organized by the International Atomic Energy Agency and co-sponsored by the European Commission, the Pan American Health Organization and the World Health Organization was held in Malaga, Spain, from 26 to 30 March 2001. The Government of Spain hosted this Conference through the Ministerio de Sanidad y Consumo, the Consejo de Seguridad Nuclear, the Junta de Andalucia, the Universidad de Malaga and the Grupo de Investigacion en Proteccion Radiologica de la Universidad de Malaga (PRUMA). The Conference was organized in co-operation with the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), the International Commission on Radiological Protection (ICRP) and the following professional societies: International Organization of Medical Physicists (IOMP), International Radiation Protection Association (IRPA), International Society of Radiation Oncology (ISRO), International Society of Radiology (ISR), International Society of Radiographers and Radiological Technologists (ISRRT) and World Federation of Nuclear Medicine and Biology (WFNMB). This publication contains contributed papers submitted to the Conference Programme Committee. The papers are in one of the two working languages of this Conference, English and Spanish. The topics covered by the Conference are as follows: Radiological protection of patients in general diagnostic radiology (radiography), Radiological protection of patients in general diagnostic radiology (fluoroscopy), Radiological protection issues in specific uses of diagnostic radiology, such as mammography and computed tomography (with special consideration of the impact of digital techniques), Radiological protection in interventional radiology, including fluoroscopy not carried out by radiologists, Radiological protection of patients in nuclear medicine, Developing and

A Study of Polishing Feature of Ultrasonic-Assisted Vibration Method in Bamboo Charcoal

Directory of Open Access Journals (Sweden)

Hsin-Min Lee

2017-01-01

Full Text Available Focusing on the feature of porosity in bamboo charcoal, this study applies the ultrasonic-assisted vibration method to perform surface polishing of the silicon wafer workpiece. The self-developed bamboo charcoal polishing spindle and ultrasonic- assisted vibration mechanism are attached to a single lapping machine. In the machining process, ultrasonic vibration enables the diamond slurry to smoothly pass through the microscopic holes of bamboo charcoal; the end of the bamboo charcoalis able to continue machining on the surface of the workpiece through the grasping force which exists in the microscopic holes. Under the polishing and machining parameters of ultrasonic-assisted vibration, with a diamond slurry concentration of 0.3%, the experimental results show a polishing time of 20 min, a loading of 25 N on the workpiece surface, a spindle speed of 1200 rpm, a vibration frequency of 30 kHz and the original surface roughness value of Ra 0.252 μm equals that of a mirror-like surface at Ra 0.017 μm. These research results prove that by using bamboo charcoal and ultrasonic-assisted vibration for polishing, a very good improvement can be achieved on the workpiece surface.

Globes and Teaching Aids Manufactured by Jan Felkl Company for the Polish Market

Directory of Open Access Journals (Sweden)

Malgorzata Taborska

2016-05-01

Full Text Available Jan Felkl company from Roztoky (Roztok near Prague manufactured globes in seventeen language versions, since 1861 also in Polish language. The company was active until 1952, but it ceased to manufacture Polish-language globes as early as in 1914. In the aftermath of the First World War, and with the development of printing business, the demand for Czech globes shrank. It is difficult to estimate the overall output of Polish- language globes manufactured by Felkl’s company throughout the 53 years it operated. From catalogues and the surviving globes we know that terrestrial globes in six sizes, folding globes in two sizes, celestial globes (probably in four sizes, as well as telluria, lunaria and planetaria were manufactured for the Polish market. It is difficult to decide how many editions of individual types of globes were issued. Polish names were compiled by Franciszek Waligórski (one globe and Mirosław Suchecki. Only 28 globes have survived to this day, including one celestial globe. Most of them are globes of an 8-inch diameter, approved by the Austrian ministries as teaching aids for schools. Nearly half of the surviving globes date from the years 1894–1914. Only ten items are in museums.

Are Polish Primary School Pupils in Favor of Wearing Uniforms? Snapshot Comment

Science.gov (United States)

Asotska, Julia; Butler, Norman L.; Davidson, Barry S.; Griffith, Kimberly Grantham; Brown, Veda E.; Kritsonis, Wiilliam Allan

2007-01-01

The purpose of this article is to discuss whether Polish primary school pupils want to wear uniforms, and it is motivated by the Polish government's recently proposed policy: Zero Tolerance for Violence at School. Seventy one pupils, who attend Podstawowka Nr30 school in Cracow, were surveyed, and the authors found that most pupils are not in…

Radiology and the mobile device: Radiology in motion

Directory of Open Access Journals (Sweden)

Sridhar G Panughpath

2012-01-01

Full Text Available The use of mobile devices is revolutionizing the way we communicate, interact, are entertained, and organize our lives. With healthcare in general and radiology in particular becoming increasingly digital, the use of such devices in radiologic practice is inevitable. This article reviews the current status of the use of mobile devices in the clinical practice of radiology, namely in emergency teleradiology. Technical parameters such as luminance and resolution are discussed. The article also discusses the benefits of such mobility vis-à-vis the current limitations of the technologies available.

Radiology and the mobile device: Radiology in motion

International Nuclear Information System (INIS)

Panughpath, Sridhar G; Kalyanpur, Arjun

2012-01-01

The use of mobile devices is revolutionizing the way we communicate, interact, are entertained, and organize our lives. With healthcare in general and radiology in particular becoming increasingly digital, the use of such devices in radiologic practice is inevitable. This article reviews the current status of the use of mobile devices in the clinical practice of radiology, namely in emergency teleradiology. Technical parameters such as luminance and resolution are discussed. The article also discusses the benefits of such mobility vis-à-vis the current limitations of the technologies available

Bacteriological Monitoring of Radiology Room Apparatus in the Department of Radiological Technology and Contamination on Hands of Radiological Technologists

International Nuclear Information System (INIS)

Kim, Seon Chil

2008-01-01

Distribution of microorganisms were examined for the bucky tables in the radiology rooms of the department of radiological technology, the aprons, handles of various apparatus, handles of mobile radiological apparatus, and hands of the radiological technologists. As a result, relatively larger amounts of bacteria were found on the handles of the mobile radiological apparatus and the aprons. Among the isolated bacteria, Acinetobacter baumanni (7.3%), Klebsiella pneumoniae (6.7%), Staphylococcus aureus (3.9%), Serratia liquefaciens (1.7%), Enterobacter cloaceae (0.6%), Providenica rettgeri (0.6%) are known as the cause of nosocomial infection (hospital acquired infection). In addition, similar colonies were also found on the hands of the radiological technologists such as microorganisms of Klebsiella pneumoniae (8.4%), Staphylococcus aureus (6.6%), Yersinia enterocolotica (5.4%), Acinetobacter baumanni (4.2%), Enterobacter cloaceae (2.4%), Serratia liquefaciens (1.8%), Yersinia pseuotuberculosis (18%), Enterobacter sakazakii (1.2%), and Escherichia coli (0.6%). In particular, this result indicates clinical significance since Staphylococcus aureus and Escherichia coli show strong pathogenicity. Therefore, a continuous education is essential for the radiological technologists to prevent the nosocomial infection.

Bacteriological Monitoring of Radiology Room Apparatus in the Department of Radiological Technology and Contamination on Hands of Radiological Technologists

Energy Technology Data Exchange (ETDEWEB)

Kim, Seon Chil [Dept. of Radiologic Technology, Daegu Health College, Daegu (Korea, Republic of)

2008-12-15

Distribution of microorganisms were examined for the bucky tables in the radiology rooms of the department of radiological technology, the aprons, handles of various apparatus, handles of mobile radiological apparatus, and hands of the radiological technologists. As a result, relatively larger amounts of bacteria were found on the handles of the mobile radiological apparatus and the aprons. Among the isolated bacteria, Acinetobacter baumanni (7.3%), Klebsiella pneumoniae (6.7%), Staphylococcus aureus (3.9%), Serratia liquefaciens (1.7%), Enterobacter cloaceae (0.6%), Providenica rettgeri (0.6%) are known as the cause of nosocomial infection (hospital acquired infection). In addition, similar colonies were also found on the hands of the radiological technologists such as microorganisms of Klebsiella pneumoniae (8.4%), Staphylococcus aureus (6.6%), Yersinia enterocolotica (5.4%), Acinetobacter baumanni (4.2%), Enterobacter cloaceae (2.4%), Serratia liquefaciens (1.8%), Yersinia pseuotuberculosis (18%), Enterobacter sakazakii (1.2%), and Escherichia coli (0.6%). In particular, this result indicates clinical significance since Staphylococcus aureus and Escherichia coli show strong pathogenicity. Therefore, a continuous education is essential for the radiological technologists to prevent the nosocomial infection.

Splenic infarct as a diagnostic pitfall in radiology

Directory of Open Access Journals (Sweden)

Joshi Sanjeev

2008-01-01

Full Text Available Follow-up of colorectal carcinoma after therapy is based on symptoms, tumor markers, and imaging studies. Clinicians sometimes face diagnostic dilemmas because of unusual presentations on the imaging modalities coupled with rising serum markers. We report a case of colorectal carcinoma that presented with gastrointestinal symptoms 14 months after completion of treatment. Investigations showed rise in carcinoembryonic antigen (CEA. Suspecting disease recurrence, complete radioimaging workup was performed; the only abnormality detected was a smooth, hypodense area in the posterior third of the spleen on contrast-enhanced computed tomography abdomen. In view of the previous diagnosis of carcinoma colon, the symptoms reported by the patient, the elevated CEA, and the atypical CECT appearance, a diagnosis of splenic metastasis was made. The patient was subjected to splenectomy as a curative treatment. However, the histopathological report revealed it to be a splenic infarct. The present case reemphasizes the limitations of radiological studies in the follow-up of carcinoma colon.

Combined Ultrasonic Elliptical Vibration and Chemical Mechanical Polishing of Monocrystalline Silicon

Directory of Open Access Journals (Sweden)

Liu Defu

2016-01-01

Full Text Available An ultrasonic elliptical vibration assisted chemical mechanical polishing(UEV-CMP is employed to achieve high material removal rate and high surface quality in the finishing of hard and brittle materials such as monocrystalline silicon, which combines the functions of conventional CMP and ultrasonic machining. In theultrasonic elliptical vibration aided chemical mechanical polishingexperimental setup developed by ourselves, the workpiece attached at the end of horn can vibrate simultaneously in both horizontal and vertical directions. Polishing experiments are carried out involving monocrystalline silicon to confirm the performance of the proposed UEV-CMP. The experimental results reveal that the ultrasonic elliptical vibration can increase significantly the material removal rate and reduce dramatically the surface roughness of monocrystalline silicon. It is found that the removal rate of monocrystalline silicon polished by UEV-CMP is increased by approximately 110% relative to that of conventional CMP because a passive layer on the monocrystalline silicon surface, formed by the chemical action of the polishing slurry, will be removed not only by the mechanical action of CMP but also by ultrasonic vibration action. It indicates that the high efficiency and high quality CMP of monocrystalline silicon can be performed with the proposed UEV-CMP technique.

Problems in laser repair welding of polished surfaces

Directory of Open Access Journals (Sweden)

A. Skumavc

2014-10-01

Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

Natural immunity factors in Polish mixed breed rabbits.

Science.gov (United States)

Tokarz-Deptuła, B; Niedźwiedzka-Rystwej, P; Adamiak, M; Hukowska-Szematowicz, B; Trzeciak-Ryczek, A; Deptuła, W

2015-01-01

Mixed-breed rabbits in Poland are widely used for diagnostic and scientific research and as utility animals, therefore there is a need to know their immunological status, as well as their haematological status. In this study natural immunity factors were analyzed in Polish mixed-breed rabbits and Polish mixed-breed rabbits with addition of blood of meet-breed, considering the impact of sex and season of the year (spring, summer, autumn, winter) using measurement of non-specific cellular and humoral immunity parameters in peripheral blood. The study has revealed that there is a variety between the two commonly used mixed-breed types of rabbits, especially when sex and season is concerned, which is crucial for using these animals in experiments.

Africa and Its People in the Polish Media

Directory of Open Access Journals (Sweden)

Średziński Paweł

2017-06-01

Full Text Available The African continent is treated by the Polish media marginally and usually seen through the lens of four domains of stereotypical perceptions that are associated with difficult life conditions, threats and dangers, beautiful and wild nature, as well as original and diverse cultures. Monitoring of the Polish media has become very important in this situation. That is why the results of first media monitoring report were published in 2011 by ‘Africa Another Way’ Foundation. Five years later the monitoring was repeated. It is hard to resist the impression that Africa is still viewed as this poor, underdeveloped and dangerous continent. And the way it is presented translates into the way individuals of African descent are perceived.

The effect of polishing technique on 3-D surface roughness and gloss of dental restorative resin composites.

Science.gov (United States)

Ereifej, N S; Oweis, Y G; Eliades, G

2013-01-01

The aim of this study was to compare surface roughness and gloss of resin composites polished using different polishing systems. Five resin composites were investigated: Filtek Silorane (FS), IPS Empress Direct (IP), Clearfil Majesty Posterior (CM), Premise (PM), and Estelite Sigma (ES). Twenty-five disk specimens were prepared from each material, divided into five groups, each polished with one of the following methods: Opti1Step (OS), OptiDisc (OD), Kenda CGI (KD), Pogo (PG), or metallurgical polishing (ML). Gloss and roughness parameters (Sa, Sz, Sq, and St) were evaluated by 60°-angle glossimetry and white-light interferometric profilometry. Two-way analysis of variance was used to detect differences in different materials and polishing techniques. Regression and correlation analyses were performed to examine correlations between roughness and gloss. Significant differences in roughness parameters and gloss were found according to the material, type of polishing, and material/polishing technique (pgloss was recorded for PM/ML (88.4 [2.3]) and lowest for FS/KD (30.3 [5.7]). All roughness parameters were significantly correlated with gloss (r= 0.871, 0.846, 0.713, and 0.707 for Sa, Sq, Sz, St, and gloss, respectively). It was concluded that the polishing procedure and the type of composite can have significant impacts on surface roughness and gloss of resin composites.

A novel vibration assisted polishing device based on the flexural mechanism driven by the piezoelectric actuators

Directory of Open Access Journals (Sweden)

Guilian Wang

2018-01-01

Full Text Available The vibration assisted polishing has widely application fields because of higher machining frequency and better polishing quality, especially the polishing with the non-resonant mode that is regarded as a kind of promising polishing method. This paper reports a novel vibration assisted polishing device, consisting of the flexible hinge mechanism driven by the piezoelectric actuators, which is suitable for polishing planes or curve surfaces with slow curvature. Firstly, the generation methods of vibration trajectory are investigated for the same frequency and different frequency signals’ inputs, respectively, and then the types of elliptic and Lissajous’s vibration trajectories are generated respectively. Secondly, a flexural mechanism consisting of the right circular flexible hinges and the leaf springs is developed to produce two-dimensional vibration trajectory. Statics and dynamics investigating of this flexible mechanism are finished in detail. The analytical models about input and output compliances of the flexural mechanism are established according to the matrix-based compliance modeling, and the dynamic model of the flexural mechanism based on the Euler-Lagrange equation is also presented. The finite element model of the flexural mechanism was established to carry out the numerical simulation in order to testify the rationality of device design. Finally, the polishing experiment is carried out to prove the effectiveness of the vibration device. The experimental results show that this novel vibration assisted polishing device developed in this study can remove more effectively the cutting marks left by last process and obviously reduce the workpiece surface roughness.

Portrayal of radiology in a major medical television series: How does it influence the perception of radiology among patients and radiology professionals?

International Nuclear Information System (INIS)

Heye, T.; Merkle, E.M.; Boll, D.T.; Leyendecker, J.R.; Gupta, R.T.

2016-01-01

To assess how the portrayal of Radiology on medical TV shows is perceived by patients and radiology professionals. In this IRB-approved study with patient consent waived, surveys were conducted among adult patients scheduled for radiological examinations and radiology professionals. The questionnaire investigated medical TV watching habits including interest in medical TV shows, appearance of radiological examination/staff, radiology's role in diagnosis-making, and rating of the shows' accuracy in portraying radiology relative to reality. One hundred and twenty-six patients and 240 professionals (133 technologists, 107 radiologists) participated. 63.5 % patients and 63.2 % technologists rated interest in medical TV shows ≥5 (scale 1-10) versus 38.3 % of radiologists. All groups noted regular (every 2nd/3rd show) to >1/show appearance of radiological examinations in 58.5-88.2 % compared to 21.0-46.2 % for radiological staff appearance. Radiology played a role in diagnosis-making regularly to >1/show in 45.3-52.6 %. There is a positive correlation for interest in medical TV and the perception that radiology is accurately portrayed for patients (r = 0.49; P = 0.001) and technologists (r = 0.38; P = 0.001) but not for radiologists (r = 0.01). The majority of patients perceive the portrayed content as accurate. Radiologists should be aware of this cultivation effect to understand their patients' behaviour which may create false expectations towards radiological examinations and potential safety hazards. (orig.)

The Polish family under Stalinist subjugation [Rodzina w sytuacji stalinowskiego zniewolenia

Directory of Open Access Journals (Sweden)

Elwira JOLANTA KRYŃSKA

2016-06-01

Full Text Available The situation of Polish families during Stalinist subjugation was particularly arduous. The family was treated as an important part of the political system’s socialization which was not rooted at all in the sphere of traditional values and norms developed in the process of historical progress of the Polish statehood. Due to the foundations of Latin civilization based on personalization that were cherished by Polish families, cynical endeavors to take away freedom, legal capacity and personal property – the objectives which Stalinism aimed at both indirectly and directly – failed, which destroyed the communists’ plans. The family did not cease to be the most important centre of human life and development. Theoreticians of a „new deal” did not manage to limit the family to the role of a „basic social unit” of „socialist morality”.

Terminology extraction from medical texts in Polish.

Science.gov (United States)

Marciniak, Małgorzata; Mykowiecka, Agnieszka

2014-01-01

Hospital documents contain free text describing the most important facts relating to patients and their illnesses. These documents are written in specific language containing medical terminology related to hospital treatment. Their automatic processing can help in verifying the consistency of hospital documentation and obtaining statistical data. To perform this task we need information on the phrases we are looking for. At the moment, clinical Polish resources are sparse. The existing terminologies, such as Polish Medical Subject Headings (MeSH), do not provide sufficient coverage for clinical tasks. It would be helpful therefore if it were possible to automatically prepare, on the basis of a data sample, an initial set of terms which, after manual verification, could be used for the purpose of information extraction. Using a combination of linguistic and statistical methods for processing over 1200 children hospital discharge records, we obtained a list of single and multiword terms used in hospital discharge documents written in Polish. The phrases are ordered according to their presumed importance in domain texts measured by the frequency of use of a phrase and the variety of its contexts. The evaluation showed that the automatically identified phrases cover about 84% of terms in domain texts. At the top of the ranked list, only 4% out of 400 terms were incorrect while out of the final 200, 20% of expressions were either not domain related or syntactically incorrect. We also observed that 70% of the obtained terms are not included in the Polish MeSH. Automatic terminology extraction can give results which are of a quality high enough to be taken as a starting point for building domain related terminological dictionaries or ontologies. This approach can be useful for preparing terminological resources for very specific subdomains for which no relevant terminologies already exist. The evaluation performed showed that none of the tested ranking procedures were

Directory of Polish Officials: A Reference Aid

Science.gov (United States)

1989-04-01

Jan 86 Deputy Director Mondalski, Janusz Aug 83 Polish Steamship Company (Polski Zegluga Morska ) (PZM) Director Andruczyk, Mieczyslaw Jan...2<> Polski Kosciol Chrzescijan Baptystow 12° Polski Linie Oceaniczne ’"- Polski Towarzystwo Ekonomiczne ’’° Polski Zegluga Morska 102 Polski

Surface qualities after chemical-mechanical polishing on thin films

International Nuclear Information System (INIS)

Fu, Wei-En; Lin, Tzeng-Yow; Chen, Meng-Ke; Chen, Chao-Chang A.

2009-01-01

Demands for substrate and film surface planarizations significantly increase as the feature sizes of Integrated Circuit (IC) components continue to shrink. Chemical Mechanical Polishing (CMP), incorporating chemical and mechanical interactions to planarize chemically modified surface layers, has been one of the major manufacturing processes to provide global and local surface planarizations in IC fabrications. Not only is the material removal rate a concern, the qualities of the CMP produced surface are critical as well, such as surface finish, defects and surface stresses. This paper is to examine the CMP produced surface roughness on tungsten or W thin films based on the CMP process conditions. The W thin films with thickness below 1000 nm on silicon wafer were chemical-mechanical polished at different down pressures and platen speeds to produce different surface roughness. The surface roughness measurements were performed by an atomic force microscope (DI D3100). Results show that the quality of surface finish (R a value) is determined by the combined effects of down pressures and platen speeds. An optimal polishing condition is, then, possible for selecting the down pressures and platen speeds.

Current radiology. Volume 5

International Nuclear Information System (INIS)

Wilson, G.H.; Hanafee, W.N.

1984-01-01

This book contains 10 selections. They are: Nuclear Magnetic Resonance Imaging, Interventional Vascular Radiology, Genitourinary Radiology, Skeletal Radiology, Digital Subtraction Angiography, Neuroradiology, Computed Tomographic Evaluation of Degenerative Diseases of the Lumbar Spine, The Lung, Otolaringology and Opthalmology, and Pediatric Radiology: Cranial, Facial, Cervical, Vertebral, and Appendicular

Medical Ethics in Radiology

International Nuclear Information System (INIS)

Kim, Kyung Won; Park, Jae Hyung; Yoon, Soon Ho

2010-01-01

According to the recent developments in radiological techniques, the role of radiology in the clinical management of patients is ever increasing and in turn, so is the importance of radiology in patient management. Thus far, there have been few open discussions about medical ethics related to radiology in Korea. Hence, concern about medical ethics as an essential field of radiology should be part of an improved resident training program and patient management. The categories of medical ethics related with radiology are ethics in the radiological management of patient, the relationship of radiologists with other medical professionals or companies, the hazard level of radiation for patients and radiologists, quality assurance of image products and modalities, research ethics, and other ethics issues related to teleradiology and fusion imaging. In order to achieve the goal of respectful progress in radiology as well as minimizing any adverse reaction from other medical professions or society, we should establish a strong basis of medical ethics through the continuous concern and self education

Analysis of papers in radiological journals in recent years: a comparison of journal of Korean radiologic society and radiology

International Nuclear Information System (INIS)

Kim, Jin Suh; Kim, Jae Kyun; Han, Dong Bok; Lim, Tae Hwan

1997-01-01

The purpose of this study was to determine current trends and the mode of future development in the field of medical radiology and to promote research among the nation's radiologists by analyzing the contents of the Journal of the Korean Radiologic Society(JKRS) and Radiology. The number of articles published in JKRS each year between 1990 and 1994 was counted. The research articles in JKRS(n=740) and in Radiology(n=1748) between 1992 and 1994 were categorized according to the objective, type, topic, materials, and radiologic techniques of their contents on the basis of predetermined criteria. Domestic Masters theses(n=126) and doctoral dissertations(n=75) accepted between 1990 and 1994, and domestic materials published in international journals (n=416) between 1986 and 1994 were also categorized using the same criteria. The greatest increase in the number of articles published in JKRS was seen during 1994. The majority of these aimed to retrospectively analyse the findings of diseases while the majority of articles published in Radiology dealt prospectively with the development and/or evaluation of diagnostic methods. More variety of topics and issues was seen in Radiology than in JKRS. The number of articles of domestic materials published in international journals increased from 1986 to 1994, while the number of articles of foreign materials published in Korea was relatively stationary : A significant number of theses and dissertations dealt, mostly prospectively, with studies of pathophysiologic and/or pharmacologic mechanisms using animal models. In order to understand both current trends and the direction and mode of future developments in the field of radiology, and to be able to actively deal with challenges at the forefront of radiologic development, it is essential to review research articles published in radiology-related journals

Effects of delayed finishing/polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials.

Science.gov (United States)

Yazici, A Ruya; Tuncer, Duygu; Antonson, Sibel; Onen, Alev; Kilinc, Evren

2010-01-01

The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P gloss values were recorded under Mylar strip for all materials. While delayed finishing/polishing resulted in a significantly higher gloss compared to immediate finishing/polishing in Venus samples (P .05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent.

Buffered Electrochemical Polishing of Niobium

Energy Technology Data Exchange (ETDEWEB)

Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

2011-03-01

The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

Gastrointestinal Carcinoid Tumors—Health Professional Version

Science.gov (United States)

Gastrointestinal carcinoid tumors are rare, slow-growing tumors that originate in the neuroendocrine cells in the GI tract. Find evidence-based information on gastrointestinal carcinoid tumors treatment and research.

Slower nicotine metabolism among postmenopausal Polish smokers.

Science.gov (United States)

Kosmider, Leon; Delijewski, Marcin; Koszowski, Bartosz; Sobczak, Andrzej; Benowitz, Neal L; Goniewicz, Maciej L

2018-06-01

A non-invasive phenotypic indicator of the rate of nicotine metabolism is nicotine metabolite ratio (NMR) defined as a ratio of two major metabolites of nicotine - trans-3'-hydroxycotinine/cotinine. The rate of nicotine metabolism has important clinical implications for the likelihood of successful quitting with nicotine replacement therapy (NRT). We conducted a study to measure NMR among Polish smokers. In a cross-sectional study of 180 daily cigarette smokers (42% men; average age 34.6±13.0), we collected spot urine samples and measured trans-3'-hydroxycotinine (3-HC) and cotinine levels with LC-MS/MS method. We calculated NMR (molar ratio) and analyzed variations in NMR among groups of smokers. In the whole study group, an average NMR was 4.8 (IQR 3.4-7.3). The group of women below 51 years had significantly greater NMR compared to the rest of the population (6.4; IQR 4.1-8.8 vs. 4.3; IQR 2.8-6.4). No differences were found among group ages of male smokers. This is a first study to describe variations in nicotine metabolism among Polish smokers. Our findings indicate that young women metabolize nicotine faster than the rest of population. This finding is consistent with the known effects of estrogen to induce CYP2A6 activity. Young women may require higher doses of NRT or non-nicotine medications for most effective smoking cessation treatment. Copyright © 2017 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier B.V. All rights reserved.

A rare cause of recurrent gastrointestinal bleeding: mesenteric hemangioma

Directory of Open Access Journals (Sweden)

Zeytunlu Murat

2009-01-01

Full Text Available Abstract Lower gastrointestinal hemorrhage accounts for approximately 20% of gastrointestinal hemorrhage. The most common causes of lower gastrointestinal hemorrhage in adults are diverticular disease, inflammatory bowel disease, benign anorectal diseases, intestinal neoplasias, coagulopathies and arterio-venous malformations. Hemangiomas of gastrointestinal tract are rare. Mesenteric hemangiomas are also extremely rare. We present a 25-year-old female who was admitted to the emergency room with recurrent lower gastrointestinal bleeding. An intraluminal bleeding mass inside the small intestinal segment was detected during explorative laparotomy as the cause of the recurrent lower gastrointestinal bleeding. After partial resection of small bowel segment, the histopathologic examination revealed a cavernous hemagioma of mesenteric origin. Although rare, gastrointestinal hemangioma should be thought in differential diagnosis as a cause of recurrent lower gastrointestinal bleeding.

Machine Learning and Radiology

Science.gov (United States)

Wang, Shijun; Summers, Ronald M.

2012-01-01

In this paper, we give a short introduction to machine learning and survey its applications in radiology. We focused on six categories of applications in radiology: medical image segmentation, registration, computer aided detection and diagnosis, brain function or activity analysis and neurological disease diagnosis from fMR images, content-based image retrieval systems for CT or MRI images, and text analysis of radiology reports using natural language processing (NLP) and natural language understanding (NLU). This survey shows that machine learning plays a key role in many radiology applications. Machine learning identifies complex patterns automatically and helps radiologists make intelligent decisions on radiology data such as conventional radiographs, CT, MRI, and PET images and radiology reports. In many applications, the performance of machine learning-based automatic detection and diagnosis systems has shown to be comparable to that of a well-trained and experienced radiologist. Technology development in machine learning and radiology will benefit from each other in the long run. Key contributions and common characteristics of machine learning techniques in radiology are discussed. We also discuss the problem of translating machine learning applications to the radiology clinical setting, including advantages and potential barriers. PMID:22465077

Upgrade of pipelines operated in a Polish conditions in accordance with European Standards

International Nuclear Information System (INIS)

Witek, M.

2007-01-01

This paper presents some aspects of changing polish technical requirements concerning high pressure gas pipelines in accordance with European Norm 1594 '' Gas supply system. Pipelines with maximum operating pressure over 16 bar. Functional requirements ''. An additional class location of the steel pipelines was analyzed and supported by the results on numerous pipeline cases in Poland. Minimum distances between pipelines and buildings are given as a proposal to upgrading polish technical law in the area of the gas grid. Special attention in analysis was given to the polish existing high pressure gas network and calculation examples of existing types of steel used in pipeline construction in the past. (author)

Apparatus and method for deterministic control of surface figure during full aperture polishing

Science.gov (United States)

Suratwala, Tayyab Ishaq; Feit, Michael Dennis; Steele, William Augustus

2013-11-19

A polishing system configured to polish a lap includes a lap configured to contact a workpiece for polishing the workpiece; and a septum configured to contact the lap. The septum has an aperture formed therein. The radius of the aperture and radius the workpiece are substantially the same. The aperture and the workpiece have centers disposed at substantially the same radial distance from a center of the lap. The aperture is disposed along a first radial direction from the center of the lap, and the workpiece is disposed along a second radial direction from the center of the lap. The first and second radial directions may be opposite directions.

Polish Literature of the Holocaust. The First Instalment: 1939-1968

Directory of Open Access Journals (Sweden)

Katarzyna Kuczyńska-Koschany

2015-01-01

Full Text Available The text is a critical attempt discussing the compendium Literatura polska wobec Zagłady, (“Polish Literature in the Face of the Holocaust” edited and published by three prominent scholarly experts on the subject: Sławomir Buryła, Dorota Krawczyńska and Jacek Leociak. This is the first of the three volumes of the series Reprezentacje Zagłady w kulturze polskiej (“Representations of the Holocaust in Polish Culture” – an endeavour which is imposing already in its first instalment concerning the years 1939-1968. The time frame of the abovementioned volume is marked by the date of the beginning of World War II (1939, resulting in the Holocaust of the Jews of Europe, and a “dry pogrom”, that is was the anti-Semitic campaign in Poland in 1968 (the campaign itself and its writings shall be examined in the following volume. A comprehensive and very carefully prepared monograph has been divided into two fundamental parts: concerning the literature reacting to the Holocaust conducted by Nazi Germany during the war (1939-1945 and discussing the literary echoes of that genocide in the years 1945-1968. The study and invaluable interpretational effort have been focused on personal document literature (Marta Janczewska, Jacek Leociak, the prose (Sławomir Buryła, Dorota Krawczyńska, the poetry (Piotr Matywiecki and the press (Ewa Koźmińska-Frejlak. A separate chapter has been devoted to a the “global text”, i.e., Archiwum Ringelbluma (“Ringelblum’s Archives”. Highly appreciating the entire volume as well as its individual fragments, recalling fundamental considerations and the ones concerning details, finally, proposing small corrections and pointing to minor shortcomings, the author of the critical review suggests the use of the formula “Polish literature of the Holocaust” (analogous to the formula coined by Grzegorz Niziołek “Polish theatre of the Holocaust” as the one principally necessary to be contrasted with the

Professional Training of Economists at Polish Universities

Science.gov (United States)

Ogienko, Olena

2016-01-01

Polish experience in professional training of economists at university has been generalized. Structural, content and procedural peculiarities of the training have been defined. It has been proved that key factors for reforming economic education in Poland are globalization, internationalization, integration, technologization and informatization.…

Gastrointestinal bleeding

Science.gov (United States)

... Sigmoidoscopy Alternative Names Lower GI bleeding; GI bleeding; Upper GI bleeding; Hematochezia Images GI bleeding - series Fecal occult blood test References Kovacs TO, Jensen DM. Gastrointestinal hemorrhage. In: Goldman L, Schafer AI, eds. Goldman- ...

Surface texture of resin-modified glass ionomer cements: effects of finishing/polishing time.

Science.gov (United States)

Yap, A U J; Ong, S B; Yap, W Y; Tan, W S; Yeo, J C

2002-01-01

This study compared the surface texture of resin-modified glass ionomer cements after immediate and delayed finishing with different finishing/polishing systems. Class V preparations were made on the buccal and lingual/palatal surfaces of 64 freshly extracted teeth. The cavities on each tooth were restored with Fuji II LC (GC) and Photac-Fil Quick (3M-ESPE) according to manufacturers' instructions. Immediately after light-polymerization, gross finishing was done with 8-fluted tungsten carbide burs. The teeth were then randomly divided into four groups of 16 teeth. Half of the teeth in each group were finished immediately, while the remaining half were finished after one-week storage in distilled water at 37 degrees C. The following finishing/polishing systems were employed: (a) Robot Carbides; (b) Super-Snap system; (c) OneGloss and (d) CompoSite Polishers. The mean surface roughness (microm; n=8) in vertical (RaV) and horizontal (RaH) axis was measured using a profilometer. Data was subjected to ANOVA/Scheffe's tests and Independent Samples t-test at significance level 0.05. Ra values were generally lower in both vertical and horizontal axis with delayed finishing/polishing. Although significant differences in RaV and RaH values were observed among several systems with immediate finishing/polishing, only one (Fuji II LC: RaH - Super-Snap < Robot Carbides) was observed with delayed finishing.

Pediatric radiology malpractice claims - characteristics and comparison to adult radiology claims

Energy Technology Data Exchange (ETDEWEB)

Breen, Micheal A.; Taylor, George A. [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States); Dwyer, Kathy; Yu-Moe, Winnie [CRICO Risk Management Foundation, Boston, MA (United States)

2017-06-15

Medical malpractice is the primary method by which people who believe they have suffered an injury in the course of medical care seek compensation in the United States and Canada. An increasing body of research demonstrates that failure to correctly diagnose is the most common allegation made in malpractice claims against radiologists. Since the 1994 survey by the Society of Chairmen of Radiology in Children's Hospitals (SCORCH), no other published studies have specifically examined the frequency or clinical context of malpractice claims against pediatric radiologists or arising from pediatric imaging interpretation. We hypothesize that the frequency, character and outcome of malpractice claims made against pediatric radiologists differ from those seen in general radiology practice. We searched the Controlled Risk Insurance Co. (CRICO) Strategies' Comparative Benchmarking System (CBS), a private repository of approximately 350,000 open and closed medical malpractice claims in the United States, for claims related to pediatric radiology. We further queried these cases for the major allegation, the clinical environment in which the claim arose, the clinical severity of the alleged injury, indemnity paid (if payment was made), primary imaging modality involved (if applicable) and primary International Classification of Diseases, 9th revision (ICD-9) diagnosis underlying the claim. There were a total of 27,056 fully coded claims of medical malpractice in the CBS database in the 5-year period between Jan. 1, 2010, and Dec. 31, 2014. Of these, 1,472 cases (5.4%) involved patients younger than 18 years. Radiology was the primary service responsible for 71/1,472 (4.8%) pediatric cases. There were statistically significant differences in average payout for pediatric radiology claims ($314,671) compared to adult radiology claims ($174,033). The allegations were primarily diagnosis-related in 70% of pediatric radiology claims. The most common imaging modality

Pediatric radiology malpractice claims - characteristics and comparison to adult radiology claims

International Nuclear Information System (INIS)

Breen, Micheal A.; Taylor, George A.; Dwyer, Kathy; Yu-Moe, Winnie

2017-01-01

Medical malpractice is the primary method by which people who believe they have suffered an injury in the course of medical care seek compensation in the United States and Canada. An increasing body of research demonstrates that failure to correctly diagnose is the most common allegation made in malpractice claims against radiologists. Since the 1994 survey by the Society of Chairmen of Radiology in Children's Hospitals (SCORCH), no other published studies have specifically examined the frequency or clinical context of malpractice claims against pediatric radiologists or arising from pediatric imaging interpretation. We hypothesize that the frequency, character and outcome of malpractice claims made against pediatric radiologists differ from those seen in general radiology practice. We searched the Controlled Risk Insurance Co. (CRICO) Strategies' Comparative Benchmarking System (CBS), a private repository of approximately 350,000 open and closed medical malpractice claims in the United States, for claims related to pediatric radiology. We further queried these cases for the major allegation, the clinical environment in which the claim arose, the clinical severity of the alleged injury, indemnity paid (if payment was made), primary imaging modality involved (if applicable) and primary International Classification of Diseases, 9th revision (ICD-9) diagnosis underlying the claim. There were a total of 27,056 fully coded claims of medical malpractice in the CBS database in the 5-year period between Jan. 1, 2010, and Dec. 31, 2014. Of these, 1,472 cases (5.4%) involved patients younger than 18 years. Radiology was the primary service responsible for 71/1,472 (4.8%) pediatric cases. There were statistically significant differences in average payout for pediatric radiology claims ($314,671) compared to adult radiology claims ($174,033). The allegations were primarily diagnosis-related in 70% of pediatric radiology claims. The most common imaging modality implicated in

Pediatric radiology malpractice claims - characteristics and comparison to adult radiology claims.

Science.gov (United States)

Breen, Micheál A; Dwyer, Kathy; Yu-Moe, Winnie; Taylor, George A

2017-06-01

Medical malpractice is the primary method by which people who believe they have suffered an injury in the course of medical care seek compensation in the United States and Canada. An increasing body of research demonstrates that failure to correctly diagnose is the most common allegation made in malpractice claims against radiologists. Since the 1994 survey by the Society of Chairmen of Radiology in Children's Hospitals (SCORCH), no other published studies have specifically examined the frequency or clinical context of malpractice claims against pediatric radiologists or arising from pediatric imaging interpretation. We hypothesize that the frequency, character and outcome of malpractice claims made against pediatric radiologists differ from those seen in general radiology practice. We searched the Controlled Risk Insurance Co. (CRICO) Strategies' Comparative Benchmarking System (CBS), a private repository of approximately 350,000 open and closed medical malpractice claims in the United States, for claims related to pediatric radiology. We further queried these cases for the major allegation, the clinical environment in which the claim arose, the clinical severity of the alleged injury, indemnity paid (if payment was made), primary imaging modality involved (if applicable) and primary International Classification of Diseases, 9th revision (ICD-9) diagnosis underlying the claim. There were a total of 27,056 fully coded claims of medical malpractice in the CBS database in the 5-year period between Jan. 1, 2010, and Dec. 31, 2014. Of these, 1,472 cases (5.4%) involved patients younger than 18 years. Radiology was the primary service responsible for 71/1,472 (4.8%) pediatric cases. There were statistically significant differences in average payout for pediatric radiology claims ($314,671) compared to adult radiology claims ($174,033). The allegations were primarily diagnosis-related in 70% of pediatric radiology claims. The most common imaging modality implicated in

On the generation of surface depressions in polishing polycrystalline diamond compacts

International Nuclear Information System (INIS)

Tang, Fengzai; Chen, Yiqing; Zhang, Liangchi

2014-01-01

This paper investigates the surface depressions generated during the polishing of the (1 1 1) surfaces of polycrystalline diamond (PCD) compacts when using the dynamic friction polishing (DFP) method. It was found that surface depressions of six-sided faces along octahedral planes were the typical features created by the DFP. Although the size of the well-developed depressions can vary significantly, the rectilinear edges are always aligned with the directions. Pronounced {1 1 1} planar defects (i.e., twins) were revealed underneath a depression apex. The interception of the defect plane with the polished surface accounts for the generation of the aligned depressions and for the discernible asymmetry of the pyramidal faces with respect to the (1 1 1) plane. It was revealed that the attached debris layer on the PCD surfaces contained sp 2 -bounded amorphous carbon and nano-sized crystals. (paper)

Radiological protection and quality control for diagnostic radiology in China

International Nuclear Information System (INIS)

Baorong, Yue

2008-01-01

Full text: There are 43,000 diagnostic departments, nearly 70,000 X-ray diagnostic facilities, 7,000 CT, 250 million for the annual total numbers of X-ray examinations, 120,000 occupationally exposed workers in diagnostic radiology. 'Basic standards for protection against ionizing radiation and for the safety of radiation sources' is promulgated on October, 2002. This basic standard follows the BSS. 'Rule on the administration of radio-diagnosis and radiotherapy', as a order of the Ministry of Health No. 46, is promulgated by Minister of Health on January 24, 2006. It includes general provisions, requirements and practice, establishment and approval of radio-diagnosis and radiotherapy services, safeguards and quality assurance, and so on. There are a series of radiological protection standards and quality control standards in diagnostic radiology, including 'radiological protection standard for the examination in X-ray diagnosis', 'radiological health protection standards for X-ray examination of child-bearing age women and pregnant women', 'radiological protection standards for the children in X-ray diagnosis', 'standards for radiological protection in medical X-ray diagnosis', 'specification for radiological protection monitoring in medical X-ray diagnosis', 'guide for reasonable application of medical X-ray diagnosis', 'general aspects for quality assurance in medical X-ray image of diagnosis', 'specification of image quality control test for the medical X-ray diagnostic equipment', 'specification of image quality assurance test for X-ray equipment for computed tomography', 'specification for testing of quality control in computed radiography (CR)' and 'specification for testing of quality control in X-ray mammography'. With the X-ray diagnostic equipment, there are acceptant tests, status tests and routing tests in large hospitals. It is poor for routing test in middle and smaller hospitals. CT is used widely in diagnostic radiology, however most workers in CT

Gastrointestinal Bleeding in Cirrhotic Patients with Portal Hypertension

Science.gov (United States)

Biecker, Erwin

2013-01-01

Gastrointestinal bleeding related to portal hypertension is a serious complication in patients with liver cirrhosis. Most patients bleed from esophageal or gastric varices, but bleeding from ectopic varices or portal hypertensive gastropathy is also possible. The management of acute bleeding has changed over the last years. Patients are managed with a combination of endoscopic and pharmacologic treatment. The endoscopic treatment of choice for esophageal variceal bleeding is variceal band ligation. Bleeding from gastric varices is treated by injection with cyanoacrylate. Treatment with vasoactive drugs as well as antibiotic treatment is started before or at the time point of endoscopy. The first-line treatment for primary prophylaxis of esophageal variceal bleeding is nonselective beta blockers. Pharmacologic therapy is recommended for most patients; band ligation is an alternative in patients with contraindications for or intolerability of beta blockers. Treatment options for secondary prophylaxis include variceal band ligation, beta blockers, a combination of nitrates and beta blockers, and combination of band ligation and pharmacologic treatment. A clear superiority of one treatment over the other has not been shown. Bleeding from portal hypertensive gastropathy or ectopic varices is less common. Treatment options include beta blocker therapy, injection therapy, and interventional radiology. PMID:27335828

Bioremediation of Petroleum and Radiological Contaminated Soils at the Savannah River Site: Laboratory to Field Scale Applications

Energy Technology Data Exchange (ETDEWEB)

BRIGMON, ROBINL.

2004-06-07

In the process of Savannah River Site (SRS) operations limited amounts of waste are generated containing petroleum, and radiological contaminated soils. Currently, this combination of radiological and petroleum contaminated waste does not have an immediate disposal route and is being stored in low activity vaults. SRS developed and implemented a successful plan for clean up of the petroleum portion of the soils in situ using simple, inexpensive, bioreactor technology. Treatment in a bioreactor removes the petroleum contamination from the soil without spreading radiological contamination to the environment. This bioreactor uses the bioventing process and bioaugmentation or the addition of the select hydrocarbon degrading bacteria. Oxygen is usually the initial rate-limiting factor in the biodegradation of petroleum hydrocarbons. Using the bioventing process allowed control of the supply of nutrients and moisture based on petroleum contamination concentrations and soil type. The results of this work have proven to be a safe and cost-effective means of cleaning up low level radiological and petroleum-contaminated soil. Many of the other elements of the bioreactor design were developed or enhanced during the demonstration of a ''biopile'' to treat the soils beneath a Polish oil refinery's waste disposal lagoons. Aerobic microorganisms were isolated from the aged refinery's acidic sludge contaminated with polycyclic aromatic hydrocarbons (PAHs). Twelve hydrocarbon-degrading bacteria were isolated from the sludge. The predominant PAH degraders were tentatively identified as Achromobacter, Pseudomonas Burkholderia, and Sphingomonas spp. Several Ralstonia spp were also isolated that produce biosurfactants. Biosurfactants can enhance bioremediation by increasing the bioavailability of hydrophobic contaminants including hydrocarbons. The results indicated that the diversity of acid-tolerant PAH-degrading microorganisms in acidic oil wastes may

[Health literacy as an element of the Polish occupational health system].

Science.gov (United States)

Dobras, Maciej

Nowadays it is believed that a comprehensive approach towards one's health requires the development and subsequent mastering of health literacy. Although this term has no Polish equivalent, it applies to the ability of individuals to access, analyze and understand information necessary to make informed health decisions. In this publication it is suggested that 'biegłość zdrowotna' can be used as a corresponding Polish term. This publication is based on the review of the available literature (in Polish and in English) on health literacy. To illustrate the hypothetical level of health literacy among Polish employers and employees reports of the Chief Labour Inspectorate and individual items from the Second European Survey of Enterprises on New and Emerging Risks (ESENER-2) were used. The analysis proves that health literacy is a multidimensional concept which has been studied and investigated so far only in relation to chosen nosological units, but practically it does not appear in relation to occupational health. There are reasons to believe that in Poland the low level of health literacy among both employers and employees, lies at the forefront of a passive approach towards the safeguarding of workers health. The concept of health literacy needs further dissemination in Poland, whereas the main area of future research should be the design of the Polish tool for assessing health literacy. The national system of occupational health seems to offer a possible ground for implementing such a concept, especially bearing in mind that within the current system there are several entities and services, which have the legal mandate to undertake informative and advisory duties - exactly those, which help build and master health literacy skills. Med Pr 2016;67(5):681-689. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Friction Properties of Polished Cvd Diamond Films Sliding against Different Metals

Science.gov (United States)

Lin, Zichao; Sun, Fanghong; Shen, Bin

2016-11-01

Owing to their excellent mechanical and tribological properties, like the well-known extreme hardness, low coefficient of friction and high chemical inertness, chemical vapor deposition (CVD) diamond films have found applications as a hard coating for drawing dies. The surface roughness of the diamond films is one of the most important attributes to the drawing dies. In this paper, the effects of different surface roughnesses on the friction properties of diamond films have been experimentally studied. Diamond films were fabricated using hot filament CVD. The WC-Co (Co 6wt.%) drawing dies were used as substrates. A gas mixture of acetone and hydrogen gas was used as the feedstock gas. The CVD diamond films were polished using mechanical polishing. Polished diamond films with three different surface roughnesses, as well as the unpolished diamond film, were fabricated in order to study the tribological performance between the CVD diamond films and different metals with oil lubrication. The unpolished and polished CVD diamond films are characterized with scanning electron microscope (SEM), atomic force microscope (AFM), surface profilometer, Raman spectrum and X-ray diffraction (XRD). The friction examinations were carried out by using a ball-on-plate type reciprocating friction tester. Low carbide steel, stainless steel, copper and aluminum materials were used as counterpart balls. Based on this study, the results presented the friction coefficients between the polished CVD films and different metals. The friction tests demonstrate that the smooth surface finish of CVD diamond films is beneficial for reducing their friction coefficients. The diamond films exhibit low friction coefficients when slid against the stainless steel balls and low carbide steel ball, lower than that slid against copper ball and aluminum ball, attributed to the higher ductility of copper and aluminum causing larger amount of wear debris adhering to the sliding interface and higher adhesive

Evaluation of the Appearance of Nail Polish Following Daily Treatment of Ex Vivo Human Fingernails With Topical Solutions of Tavaborole or Efinaconazole.

Science.gov (United States)

Vlahovic, Tracey C; Coronado, Dina; Chanda, Sanjay; Merchant, Tejal; Zane, Lee T

2016-01-01

Patients with onychomycosis may mask infected nails with polish. Tavaborole topical solution, 5% is a boron-based, small-molecule pharmaceutical approved for the treatment of toenail onychomycosis caused by Trichophyton rubrum and Trichophyton mentagrophytes; efinaconazole topical solution, 10% is approved for the same indication. Nail polish appearance after application of tavaborole (dropper) or efinaconazole (brush); respective applicator appearance; presence of color transfer from respective applicators; and color transfer to remaining solutions after dosing of polished nails were evaluated. Twelve ex vivo human cadaver fingernails were cleaned, polished with two coats of L'Oréal® Nail Color, Devil Wears Red #420, and mounted on floral foam. Nails were treated with tavaborole or efinaconazole solutions once daily for 7 days. Dropper and brush applicators were applied to white watercolor paper immediately after dosing to evaluate color transfer from polished nails. On day 7, remaining solutions were transferred to clear glass vials to evaluate color transfer from applicators to solutions. Nails, applicators, and papers were photographed daily following application; remaining solutions were photographed after 7 days of dosing. Tavaborole-treated polished nails showed no polish discoloration, and tavaborole applicators did not change in appearance during treatment. No color transfer from polished nails was evident to applicator, paper, or remaining solution. Efinaconazole-treated polished nails showed substantial polish changes after the first day of treatment, with polish appearance and discoloration progressively worsening over 7 days of treatment. Color transfer from nails was evident to applicator, paper, and remaining solution. Daily dropper application of tavaborole to ex vivo polished nails did not alter polish appearance. Brush application of efinaconazole produced visible changes in polish appearance and color transfer to applicators, paper, and

Machine learning and radiology.

Science.gov (United States)

Wang, Shijun; Summers, Ronald M

2012-07-01

In this paper, we give a short introduction to machine learning and survey its applications in radiology. We focused on six categories of applications in radiology: medical image segmentation, registration, computer aided detection and diagnosis, brain function or activity analysis and neurological disease diagnosis from fMR images, content-based image retrieval systems for CT or MRI images, and text analysis of radiology reports using natural language processing (NLP) and natural language understanding (NLU). This survey shows that machine learning plays a key role in many radiology applications. Machine learning identifies complex patterns automatically and helps radiologists make intelligent decisions on radiology data such as conventional radiographs, CT, MRI, and PET images and radiology reports. In many applications, the performance of machine learning-based automatic detection and diagnosis systems has shown to be comparable to that of a well-trained and experienced radiologist. Technology development in machine learning and radiology will benefit from each other in the long run. Key contributions and common characteristics of machine learning techniques in radiology are discussed. We also discuss the problem of translating machine learning applications to the radiology clinical setting, including advantages and potential barriers. Copyright © 2012. Published by Elsevier B.V.

Radiology in Medical Education: A Pediatric Radiology Elective as a Template for Other Radiology Courses.

Science.gov (United States)

Hilmes, Melissa A; Hyatt, Eddie; Penrod, Cody H; Fleming, Amy E; Singh, Sudha P

2016-03-01

Traditionally, the pediatric radiology elective for medical students and pediatric residents constituted a morning teaching session focused mainly on radiography and fluoroscopy. A more structured elective was desired to broaden the exposure to more imaging modalities, create a more uniform educational experience, and include assessment tools. In 2012, an introductory e-mail and formal syllabus, including required reading assignments, were sent to participants before the start date. A rotating weekly schedule was expanded to include cross-sectional imaging (ultrasound, CT, MR) and nuclear medicine. The schedule could accommodate specific goals of the pediatric resident or medical student, as requested. Starting in 2013, an online pre-test and post-test were developed, as well as an online end-of-rotation survey specific to the pediatric radiology elective. Taking the Image Gently pledge was required. A scavenger hunt tool, cue cards, and electronic modules were added. Pre-test and post-test scores, averaged over 2 years, showed improvement in radiology knowledge, with scores increasing by 27% for medical students and 21% for pediatric residents. Surveys at the end of the elective were overwhelmingly positive, with constructive criticism and complimentary comments. We have successfully created an elective experience in radiology that dedicates time to education while preserving the workflow of radiologists. We have developed tools to provide a customized experience with many self-directed learning opportunities. Our tools and techniques are easily translatable to a general or adult radiology elective. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Patient health communication mediating effects between gastrointestinal symptoms and gastrointestinal worry in pediatric inflammatory bowel disease

Science.gov (United States)

To investigate the effects of patient health communication regarding their inflammatory bowel disease (IBD) to their health care providers and significant others in their daily life as a mediator in the relationship between gastrointestinal symptoms and gastrointestinal worry in pediatric patients. ...

The corpus-driven revolution in Polish Sign Language: the interview with Dr. Paweł Rutkowski

Directory of Open Access Journals (Sweden)

Iztok Kosem

2018-02-01

Full Text Available Dr. Paweł Rutkowski is head of the Section for Sign Linguistics at the University of Warsaw. He is a general linguist and a specialist in the field of syntax of natural languages, carrying out research on Polish Sign Language (polski język migowy — PJM. He has been awarded a number of prizes, grants and scholarships by such institutions as the Foundation for Polish Science, Polish Ministry of Science and Higher Education, National Science Centre, Poland, Polish–U.S. Fulbright Commission, Kosciuszko Foundation and DAAD. Dr. Rutkowski leads the team developing the Corpus of Polish Sign Language and the Corpus-based Dictionary of Polish Sign Language, the first dictionary of this language prepared in compliance with modern lexicographical standards. The dictionary is an open-access publication, available freely at the following address: http://www.slownikpjm.uw.edu.pl/en/. This interview took place at eLex 2017, a biennial conference on electronic lexicography, where Dr. Rutkowski was awarded the Adam Kilgarriff Prize and gave a keynote address entitled Sign language as a challenge to electronic lexicography: The Corpus-based Dictionary of Polish Sign Language and beyond. The interview was conducted by Dr. Victoria Nyst from Leiden University, Faculty of Humanities, and Dr. Iztok Kosem from the University of Ljubljana, Faculty of Arts.

Audit Committee Practice in the Polish Listed Stock Companies. Present Situation and Development Perspectives

Directory of Open Access Journals (Sweden)