WorldWideScience

Sample records for polish coal industry

  1. Separation of mercury in industrial processes of Polish hard steam coals cleaning

    Directory of Open Access Journals (Sweden)

    Wierzchowski Krzysztof

    2016-01-01

    Full Text Available Coal use is regarded as one of main sources of anthropogenic propagation of mercury in the environment. The coal cleaning is listed among methods of the mercury emission reduction. The article concerns the statistical assessment of mercury separation between coal cleaning products. Two industrial processes employed in the Polish coal preparation plants are analysed: coal cleaning in heavy media vessels and coal cleaning in jigs. It was found that the arithmetic mean mercury content in coarse and medium coal size fractions for clean coal from heavy media vessels, amounts 68.9 μg/kg, and most of the results lay below the mean value, while for rejects it amounts 95.5 μg/kg. It means that it is for around 25 μg/kg greater than in the clean coal. The arithmetic mean mercury content in raw coal smalls amounts around 118 mg/kg. The cleaning of smalls in jigs results in clean coal and steam coal blends characterized by mean mercury content 96.8 μg/kg and rejects with mean mercury content 184.5 μg/kg.

  2. Germanium content in Polish hard coals

    Directory of Open Access Journals (Sweden)

    Makowska Dorota

    2016-01-01

    Full Text Available Due to the policy of the European Union, it is necessary to search for new sources of scarce raw materials. One of these materials is germanium, listed as a critical element. This semi-metal is widely used in the electronics industry, for example in the production of semiconductors, fibre optics and solar cells. Coal and fly ash from its combustion and gasification for a long time have been considered as a potential source of many critical elements, particularly germanium. The paper presents the results of germanium content determination in the Polish hard coal. 23 coal samples of various coal ranks were analysed. The samples were collected from 15 mines of the Upper Silesian Coal Basin and from one mine of the Lublin Coal Basin. The determination of germanium content was performed with the use of Atomic Absorption Spectrometry with Electrothermal Atomization (GFAAS. The investigation showed that germanium content in the analysed samples was at least twice lower than the average content of this element in the hard coals analysed so far and was in the range of 0.08 ÷ 1.28 mg/kg. Moreover, the content of Ge in the ashes from the studied coals does not exceed 15 mg/kg, which is lower than the average value of Ge content in the coal ashes. The highest content of this element characterizes coals of the Lublin Coal Basin and young coals type 31 from the Vistula region. The results indicate a low utility of the analysed coal ashes as a source of the recovery of germanium. On the basis of the analyses, the lack of the relationship between the content of the element and the ash content in the tested coals was noted. For coals of the Upper Silesian Coal Basin, the relationship between the content of germanium in the ashes and the depth of the seam was observed.

  3. Coal industry annual 1997

    International Nuclear Information System (INIS)

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs

  4. Coal industry annual 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  5. Coal Industry Annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  6. Coal industry annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  7. Coal Industry Annual 1995

    International Nuclear Information System (INIS)

    1996-10-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995

  8. Coal industry annual 1996

    International Nuclear Information System (INIS)

    1997-11-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs

  9. Coal industry annual 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-06

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

  10. Coal industry annual 1993

    International Nuclear Information System (INIS)

    1994-01-01

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993

  11. Industrial coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

  12. The Indonesian coal industry

    International Nuclear Information System (INIS)

    Cook, A.; Daulay, B.

    2000-01-01

    In this comprehensive article the authors describe the origins and progress of the Indonesian coal industry and the role it plays, and will play, in the domestic energy scene and world coal trade. In the '80s, the Indonesian coal industry laid the basis for major expansion such that coal production rose from under a million tonnes in 1983 to 10.6 million tonnes in 1990, 50.9 million tonnes by 1996 and 61.2 million tonnes in 1992. At the same time, exports have increased from 0.4 million tonnes to 44.8 million tonnes. Current export levels are higher than originally expected, due in part to a slow down in the construction of electric power stations and a partial switch to natural gas. This has slowed the rate at which domestic coal demand has built up. The majority of coals currently exported are low rank steam coals, but some of the higher rank and very low ash coals are used for blast furnace injection, and a very small proportion may even be used within coking blends, even though they have poor coking properties. The Indonesian coal industry has developed very rapidly over the last six years to become a significant exporter, especially within the ASEAN context. The resources base appears to be large enough to support further increases in production above those already planned. It is probable that resources and reserves can be increased above the current levels. It is likely that some reserves of high value coals can be found, but it is also probable that the majority of additions to reserves will be lower in rank (and therefore quality) compared with the average of coals currently being mined. Reserves of qualities suitable for export will support that industry for a considerable period of time. However, in the longer term, the emphasis of production will increasingly swing to the domestic market

  13. Cost comparison of selected US and Polish coal mines, August 1993

    International Nuclear Information System (INIS)

    1993-08-01

    This report on the Polish coal industry is the fifth in a series of studies on coal exporting countries requested by the House Appropriations Committee. The committee requested that the basic differences in mining costs for U.S. and foreign mines be identified, especially those costs incurred in complying with health, safety, and environmental regulations. Basic costs in extracting raw coal are analyzed in this report for underground longwall mining operations, the only mining method employed in Poland for hard coal. In this report there is also a limited analysis of the relative market competitiveness of selected Polish and U.S. steam and metallurgical coal mines in the European electric utility and metallurgical coal markets

  14. Polish Industry and Art at CERN

    CERN Multimedia

    2000-01-01

    On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

  15. Discussion on Wastewater Treatment Process of Coal Chemical Industry

    Science.gov (United States)

    Zhao, Dongyan; Lun, Weijie; Wei, Junjie

    2017-12-01

    Coal chemical wastewater has such characteristics as high concentration of oil, ammonia nitrogen and COD. In this paper, treatment process of coal chemical industry is described mainly, such as pretreatment process, biochemical treatment process and polishing process. Through the recovery of phenol and ammonia and the treatment of wastewater from abroad, the new technology of wastewater treatment in coal chemical industry was expounded. Finally, The development of coal chemical wastewater treatment technology is prospected, and the pretreatment technology is emphasized. According to the diversification and utilization of water, zero discharge of coal chemical wastewater will be fulfilled.

  16. Database for content of mercury in Polish brown coal

    Science.gov (United States)

    Jastrząb, Krzysztof

    2018-01-01

    Poland is rated among the countries with largest level of mercury emission in Europe. According to information provided by the National Centre for Balancing and Management of Emissions (KOBiZE) more than 10.5 tons of mercury and its compounds were emitted into the atmosphere in 2015 from the area of Poland. Within the scope of the BazaHg project lasting from 2014 to 2015 and co-financed from the National Centre of Research and Development (NCBiR) a database was set up with specification of mercury content in Polish hard steam coal, coking coal and brown coal (lignite) grades. With regard to domestic brown coal the database comprises information on coal grades from Brown Coal Mines of `Bełchatów', `Adamów', `Turów' and `Sieniawa'. Currently the database contains 130 records with parameters of brown coal, where each record stands for technical analysis (content of moisture, ash and volatile particles), elemental analysis (CHNS), content of chlorine and mercury as well as net calorific value and combustion heat. Content of mercury in samples of brown coal grades under test ranged from 44 to 985 μg of Hg/kg with the average level of 345 μg of Hg/kg. The established database makes up a reliable and trustworthy source of information about content of mercury in Polish fossils. The foregoing details completed with information about consumption of coal by individual electric power stations and multiplied by appropriate emission coefficients may serve as the background to establish loads of mercury emitted into atmosphere from individual stations and by the entire sector of power engineering in total. It will also enable Polish central organizations and individual business entities to implement reasonable policy with respect of mercury emission into atmosphere.

  17. Indian coal industry: Growth perspective

    International Nuclear Information System (INIS)

    Sachdev, R.K.

    1993-01-01

    Growth perspective of Indian coal industry and their environmental aspects, are discussed. The complete coal chain comprises of mining including preparation and processing, transport, usage and disposal of solid, liquid and gaseous wastes. Proper environmental protection measures are therefore, required to be integrated at every stage. At mining stage, land reclamation, restoration of surface damaged by subsidence and proper treatment of effluents are the minimum requirement for effective environmental protection. Since coal will continue to be the major source of commercial energy in coming decades initiative will have to be taken in making coal a clean fuel from the point of view of its usage in different industries. Washing of high ash coals for reducing the ash content will go a long way in reducing the atmospheric pollution through better plant performance and reduced environmental pollution at the power plants. (author)

  18. Australia's coal industry bottoms out

    International Nuclear Information System (INIS)

    Edwards, G.E.

    2000-01-01

    The last decade has been a tough period for the Australian coal industry, despite increases in production, productivity and exports. Profitability has fallen, mines have closed and ownerships have changed hands. The start of the new millennium seems to be heralding in a welcome change of fortune for the Australian coal industry, with signs that a recovery is finally arriving. Coal provides around 26% of global primary energy needs (compared with oil at 40%, gas at 24%, nuclear at 7% and renewables at 3%) and generates about 37% of the world's electricity (compared with renewables at 21%, nuclear at 17%, gas at 16% and oil at 9%). This is in spite of the adverse publicity that coal has been receiving regarding its contribution to the Greenhouse Effect, even relative to other fossil fuels, principally natural gas

  19. Australian coal industry continues expansion

    International Nuclear Information System (INIS)

    Edwards, G.E.

    1991-01-01

    Recent saleable Australian black coal production figures are given along with trends in development of new operations and new technology aiming to provide a sound basis for the continuing expansion of the Australian coal industry. Export prices from 1982 to 1991 to Japan (Australia's major export market) are provided, together with Australian dollar return to exporters at the exchange rate prevailing at the start of each contract year. An increased demand for steaming coal is expected, thus maintaining Australia's position as the world's larger exporter. 4 tabs

  20. Unattached fraction of radon progeny in Polish coal mines

    International Nuclear Information System (INIS)

    Skubacz, K.; Michalik, B.

    2002-01-01

    The system of the monitoring of the radiation hazard in Polish coal mines is based on the monitoring of the workplaces. This system works since 1989 in all coal mines. It gives a very good basis for further epidemiological investigation and assessment of the health detriment within the population of the mines as a result of the exposure for natural radiation. It is very important problem, due to the fact of the presence in the mines another factors, which probably have a synergetic effects on the respiratory tracts. As the routine instrument, a device called ALFA-31 sampling probe was developed in our laboratory. This device was accomplished to regular dust sampler and simultaneous measurements of dust content and potential alpha energy concentration of radon progeny are obligatory in all underground mines in Poland. But the microcyclone used a separator of the respirable fraction which causes the cut-off of unattached fraction of radon progeny, On the other hand measurements of the unattached fraction of short lived radon progeny play a very important role in the investigations of the adequate dose from this source of radiation hazard. During field experiments the use of the alpha spectroscopy system is necessary, while measurements are done not in the vacuum chambers but under normal pressure. It leads to situation, when particular peaks in alpha spectrum are very wide and interfere with other peaks of another alpha-emitting radionuclides. Such instrumentation was designed and completed, and a survey in several underground mines was performed. The analysis of the obtained results must be done very carefully; in other case it may cause a very big uncertainty of the result. In this paper a new approach to the analysis of the alpha spectra has been described. This approach can be used also in other applications of alpha spectroscopy, in which the analysis of energy of alpha peaks in spectrum is needed. The method of the analysis is based on a non-linear regression

  1. Polish food industry 2008-2013

    OpenAIRE

    Mroczek, Robert; Drożdż, Jadwiga; Tereszczuk, Mirosława; Urban, Roman

    2014-01-01

    The aim of the study is to evaluate the functioning of the food industry and its various sectors in 2008-2013. Meat and poultry industry. Dairy industry. Fishing industry. Milling industry. Sugar industry. Oil-mill industry. Processing of fruit, vegetables and potatoes. Bakery industry. Confectionery industry. Feed industry. Production of other food products. Production of alcoholic beverages.Tobacco industry. Food industry.

  2. The role of Polish coal in the EU economy; Die Bedeutung der polnischen Steinkohle fuer die Wirtschaft der Europaeischen Union

    Energy Technology Data Exchange (ETDEWEB)

    Czaja, P. [AGH Univ. fuer Wissenschaft und Technologie, Krakau (Poland)

    2006-06-15

    The contribution attempts a comparative assessment of coal mining in Poland and other EU member states. The importance of Polish coal is reflected in the share of Polish coal in EU imports, its contribution to the EU internal market and the total coal consumption within the EU. The role of coal in Poland will be maintained for the next 30 years or so, although the share of other energy sources should increase in the long run. (orig.)

  3. Industry at odds over export coal prices

    International Nuclear Information System (INIS)

    Yarwood, Ken.

    1993-01-01

    The United Mine Workers' Union claims that Australia is not getting enough for its coal. Moreover, coal company executives argue that the open market policy was failing the industry and that the export customers were manipulating Australian producers. Consequently, the unions are calling for Federal Government intervention and support the establishment of a national coal authority to co-ordinate the marketing of coal and investment in the industry. ills

  4. The Environmental Impacts Of The Coal Industry

    Science.gov (United States)

    Burtsev, Sergey; Efimov, Viktor; Korchagina, Tatyana

    2017-11-01

    The article analyzes the main indicators of the Russian coal industry's impact on the environment: the atmosphere, hydrosphere and lithosphere for the year 2016 compared with 2015. It also identifies actual values of the environmental safety targets of the coal industry and the main investments in the nature protection. For prevention, restriction and minimization the negative impact on the environment, the coal industry has proposed the packages of managerial and technical measures.

  5. The coal industry and its greenhouse challenge

    International Nuclear Information System (INIS)

    Armstrong, A.

    1998-01-01

    The Australian coal industry is actively involved in greenhouse gas emission management and abatement issues. An Australian Coal Association (ACA) position paper on greenhouse in November 1989, recommended a number of strategies to minimise the greenhouse effect, including the enhancement of energy utilisation efficiency, improved energy conversion efficiency at coal-fired power stations, expanded use of solar heating, and improved recycling. All of the strategies have been implemented to various degrees. The management and abatement of greenhouse gas emissions within the coal industry has been approached from an individual operational level, and a 'higher' industry level

  6. Coal industry defies recession with record exports

    International Nuclear Information System (INIS)

    Casey, Denis.

    1994-01-01

    Despite the worldwide recession which has adversely affected many commodities, the New South Wales coal industry achieved record production and exports during 1992-93. Although saleable coal production increased by only a modest 0.7%, experts rose by an impressive 7.1% to 57.4 million tonnes. Coking coal jumped by 14.6% to 23.6 million tonnes while thermal coal increased by 2.7% to 33.8 million tonnes. The value of coal experts amounted at $3.1 million. 1 tab

  7. Industrial environmental practices in Polish Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    , and environment. The five case firms all had a Communist past. The firms represent three different industrial sectors; i.e. textile, energy, and publishing and printing industries. Furthermore, the firms are both private and state owned as well as in the process of privatisation.......The study investigates how discursive developments in Poland interact with industrial environmental practices in five production firms. The analysis of the discursive development covers the period from the end of World War I to the turn of the century. The areas in focus are identity, industry...

  8. The prospects for hard coal as a fuel for the Polish power sector

    International Nuclear Information System (INIS)

    Kaminski, Jacek; KudeLko, Mariusz

    2010-01-01

    This paper presents the prospects for the development of the Polish hard coal sector from the perspective of the power sector. The most important issues determining the mid- and long-term future for domestic coal production are: (1) the development of the economy, hence the demand for electricity, (2) regulations (mostly environmental) affecting the power sector, (3) the competitiveness of coal-based technologies, and (4) the costs of domestic coal production. Since the range of issues and relations being considered is very broad, a specific method needs to be employed for the quantitative analysis. The tool applied in this study is the partial equilibrium model POWER-POL, in which both the coal and the power sectors are incorporated. The model focuses on energy-economy-environmental issues without capturing detailed macroeconomic links. The model was run under six scenario assumptions. The results show that the domestic coal sector should maintain its position as a key supplier of primary energy for the Polish power sector. However, the environmental regulations to which the domestic power sector has to conform will decrease the share of coal in the fuel-mix. Since the investment processes in this sector are usually long-term, the effects of changes will be noticeable from 2015 onwards. - Research highlights: →Application of the partial equilibrium model POWER-POL for a quantitative analysis. →Coal will maintain its dominant position in the Polish heat and electricity production fuel-mix at least up to 2020. →Attractiveness of domestic hard coal supplies will depend on the environmental regulations (mostly on the EU level) and development in the world coal market. →The first nuclear power plant will be put into operation in 2020.

  9. The role of coal consumption in the economic growth of the Polish economy in transition

    International Nuclear Information System (INIS)

    Gurgul, Henryk; Lach, Lukasz

    2011-01-01

    The main goal of this paper is an analysis of the causal links between quarterly coal consumption in the Polish economy and GDP. For the sake of accurate computation an additional variable - employment - was also taken into account. Computations conducted for the period Q1 2000 to Q4 2009 by means of recent causality techniques confirmed the neutrality of hard coal usage with respect to economic growth. On the other hand, calculations for the pairs lignite-GDP and total coal consumption-GDP showed the existence of a significant nonlinear causality from coal usage to economic growth. This is clear evidence for claiming that lignite plays an important role in the economic growth of the Polish economy. Furthermore, each coal-related variable was found to have a nonlinear causal impact on employment. Because of the relatively short length of available time series we additionally applied bootstrap critical values. The empirical results computed by both methods did not exhibit significant differences. These results have important policy implications. In general, our findings support the hypothesis that closing hard coal mines in Poland should have no significant repercussions on economic growth. However, this does not seem to be true for lignite mines. - Research highlights: → The reduction of hard coal consumption should not hamper economic growth in Poland. → Lignite consumption is an important factor determining economic growth in Poland. → The usage of lignite and hard coal has a causal impact on employment in Poland.

  10. The potential risk of environmental contamination by mercury contained in Polish coal mining waste

    Directory of Open Access Journals (Sweden)

    Tomasz Antoszczyszyn

    2016-01-01

    Full Text Available The paper contains reference literature analysis concerning mercury content in Polish bituminous coal and post-mining waste as well as the impact of mercury content on the environment. The aim of the paper was to determine the occurrence of the risk of contamination of the environment with mercury compounds found in demolition bituminous coal landfills. Mercury, due to its toxic properties has been classified among the most dangerous substances to human health. There are three groups of sources of mercury release into the environment: natural, anthropogenic and remission. Coal mining, its processing and use in the energy sector has the greatest relevance regarding the pollution of the environment with mercury compounds in Poland. A review of reference literature shows that the average content of mercury in Polish bituminous coal varies within a wide range of 41–399 ppb, which is conditional on the origin, age and type of coal. The production of coal has led to a number of facilities in the form of structurally and age-varied landfills, heaps and mining waste dumps. The content of mercury in post-mining waste is in the range from approximately 55 to 380 ppb. The problem of environmental contamination with mercury has attracted considerable interest due to the effects that its concentration have in the biosphere. On the basis of the existing data it has been found that the content of mercury in soils in areas degraded by mining and processing of coal is even 10–16 times higher, compared to the geochemical background. It is necessary to conduct research in this area due to the limited results of research on mercury content in deposited waste from the preparation and flotation of Polish bituminous coals and the potential harmful effect of mercury on the environment. The paper is dedicated to the mercury content in waste from the extraction and processing of bituminous coal.

  11. The New South Wales coal industry

    International Nuclear Information System (INIS)

    Anon.

    1997-01-01

    The New South Wales coal industry contributes about $3.3 billion, or 43%, to Australia's coal export income. It is stated that the industry has made many changes in its 200 years history and prepares to adjust to new circumstances and practices. Among the changes outlined has been the move from hand mining to advanced technology and in the new approach to minesite rehabilitation

  12. Analysis of operational risk in a Polish coal preparation plant

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, W.; Sablik, J.; Martyniak, J.; Wycisk, H. [Central Mining Institute, Katowice (Poland)

    2001-07-01

    The article presents methodology and results of studies, which allow one to characterise a coal preparation plant by means of operational risk analysis and to draw conclusions which could be used for making production management and investment decisions. 6 refs., 6 figs., 2 tabs.

  13. The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Marcin Puziak

    2017-06-01

    Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

  14. Contamination of settling ponds and rivers as a result of discharge of radium-bearing waters from Polish coal mines.

    Science.gov (United States)

    Chalupnik, S; Michalik, B; Wysocka, M; Skubacz, K; Mielnikow, A

    2001-01-01

    Saline waters from underground coal mines in Poland often contain natural radioactive isotopes, mainly 226Ra from the uranium decay series and 228Ra from the thorium series. Approximately 40% of the total amount of radium remains underground as radioactive deposits, but 225 MBq of 226Ra and 400 MBq of 228Ra are released daily into the rivers along with the other mine effluents from all Polish coal mines. Technical measures such as inducing the precipitation of radium in gobs, decreasing the amount of meteoric inflow water into underground workings, etc. have been undertaken in several coal mines, and as a result of these measures, the total amount of radium released to the surface waters has diminished by about 60% during the last 5-6 years. Mine water can have a severe impact on the natural environment, mainly due to its salinity. However, associated high levels of radium concentration in river waters, bottom sediments and vegetation have also been observed. Sometimes radium concentrations in rivers exceed 0.7 kBq/m3, which is the permitted level for waste waters under Polish law. The extensive investigations described here were carried out for all coal mines and on this basis the total radium balance in the effluents has been calculated. Measurements in the vicinity of mine settling ponds and in rivers have given us an opportunity to study radium behaviour in river waters and to assess the degree of contamination. Solid waste materials with enhanced natural radioactivity have been produced in huge amounts in the power and coal industries in Poland. As a result of the combustion of coal in power plants, low-radioactive waste materials are produced, with 226Ra concentration seldom exceeding a few hundreds of Bq/kg. A different situation is observed in coal mines, where, as a result of precipitation of radium from radium-bearing waters, highly radioactive deposits are formed. Sometimes the radioactivity of such materials is extremely high; precipitates from coal

  15. The restructuring of the international coal industry

    International Nuclear Information System (INIS)

    Humphreys, D.; Welham, K.

    2000-01-01

    The international coal industry is now becoming a global industry emerging from a history of production for national purposes and isolated regional markets. The participants in the market are also changing; the oil companies have come and gone and production is now in the hands of specialist mining companies. This has implications for the way the industry is organized. Deregulation in the electricity market means that coal mining companies face the challenge of entering into the new millennium in a more competitive market but companies may also have the opportunity to differentiate their product through risk management. (orig.)

  16. Impact of petroleum industry horizontal divestiture on the coal market

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, D.L.; Dymond, L.H.; Marris, R.L.

    1979-06-22

    Volume 2 contains appendices as follows: coal supply curves, coal supply model modifications, coal mine financing data, legislative proposals for horizontal divestiture, overview of oil companies in coal industry (including their coal reserves) and the major sources of data and bibliography. (LTN)

  17. Australia's export coal industry: a project of the Coal Australia Promotion Program. 2. ed.

    International Nuclear Information System (INIS)

    1995-01-01

    This booklet presents an overview of the Australian coal industry, emphasises the advantages of using Australian coal and outlines government policies, both Commonwealth and State, which impact on coal mine development, mine ownership and coal exports. It also provides information on the operations and products of each producer supplying coal and coke to export markets and gives contact details for each. The emphasis is on black coal, but information on coal briquettes and coke is also provided. Basic information on the rail networks used for the haulage of export coal and on each of the bulk coal loading terminals is also included.(Author). 3 figs., photos

  18. Characterizing thermogenic coalbed gas from Polish coals of different ranks by hydrous pyrolysis

    Science.gov (United States)

    Kotarba, M.J.; Lewan, M.D.

    2004-01-01

    To provide a better characterization of origin and volume of thermogenic gas generation from coals, hydrous pyrolysis experiments were conducted at 360??C for 72 h on Polish coals ranging in rank from lignite (0.3% R r) to semi-anthracite (2.0% Rr). Under these conditions, the lignites attained a medium-volatile bituminous rank (1.5% Rr), high-volatile bituminous coals attained a low-volatile bituminous rank (1.7% Rr), and the semi-anthracite obtained an anthracite rank (4.0% R r). Hydrous pyrolysis of a coal, irrespective of rank, provides a diagnostic ??13C value for its thermogenic hydrocarbon gases. This value can be used quantitatively to interpret mixing of indigenous thermogenic gas with microbial methane or exogenous thermogenic gas from other sources. Thermogenic methane quantities range from 20 dm3/kg of lignite (0.3% Rr) to 0.35 dm3/kg of semi-anthracite (2.0% Rr). At a vitrinite reflectance of 1.7% Rr, approximately 75% of the maximum potential for a coal to generate thermogenic methane has been expended. At a vitrinite reflectance of 1.7% Rr, more than 90% of the maximum potential for a coal to generate CO2 has been expended. Assuming that these quantities of generated CO2 remain associated with a sourcing coal bed as uplift or erosion provide conditions conducive for microbial methanogenesis, the resulting quantities of microbial methane generated by complete CO2 reduction can exceed the quantities of thermogenic methane generated from the same coal bed by a factor of 2-5. ?? 2004 Elsevier Ltd. All rights reserved.

  19. Fuel Cells in the Coal Energy Industry

    Directory of Open Access Journals (Sweden)

    Kolat Peter

    1998-09-01

    Full Text Available In march 1998 at the conference „Coal Utilization & Fuel Systems“ in Clearwater, USA representatives of U.S. Department of Energy presented the vision 21 focused on the electricity generation from coal for 21st century. The goal is a powerplant with the ability to produce the electricity from coal with the efficiency approaching 60% (higher heating value and emission levels of one-tenth of today´s technologies, The CO2 capture and permanent sequestration at the cost of $15/ton of CO2, and a cost of electricity of 3 cents per kilowatt-hour. The goal is believed to be achievable by the first quarter of the next century. The vision 21 is presented with several possible concepts. One of them is based on coal gasification with following hydrogen separation. The obtained hydrogen is used as a fuel for the cogeneration unit with fuel cells. The remaining gas can be liquefied and utilised as a fuel in the automotive industry or further chemically processed. The concept has several important features. Firstly, a very clean low cost electricity production. Secondly, it is comprised of fuel processing section and power processing section. The two sections need not to be co-located. In the world of the deregulated electricity generation this offers a major advantage. The technologies of fuel processing section – coal gasification and hydrogen separation have been successfully developed in the last two decades. A specificity of the fuel processing section of this concept is to obtain hydrogen rich gas with very low concentrations of substances, as CO, which cause a poisoning of electrodes of fuel cells leading to the decreasing fuel cells efficiency. Fuel cells, specially highly efficient coal-gas SOFC and MCFC, are expected to be commercially available by 2020. The natural-gas MCFC and SOFC plants should enter the commercial marketplace by the year 2002.

  20. Lab-Scale Investigations During Combustion of Agricultural Residues and Selected Polish Coals

    Directory of Open Access Journals (Sweden)

    Kordylewski Włodzimierz K.

    2014-06-01

    Full Text Available Preliminary lab-scale investigations were conducted on slagging abatement in biomass-firing by fuel mixing. Three agriculture biomass fuels and olive cake were used in the experiments. Polish lignites and bituminous coals were examined as anti-sintering additives. The effects of chlorine release, potassium retention and ash sintering were examined by heating samples of biomass fuels and additives in the muffle oven and, next, firing them in the laboratory down-fired furnace at the temperature in the range of 800-1150ºC. The obtained slag samples were analysed on: chlorine and potassium content, sintering tendency and crystalline components. Among the examined coals lignite from Turów mine and bituminous coal from Bolesław Śmiały mine appeared to be the most effective in potassium retention in aluminosilicate and chlorine release from slag. Possibly the major factor of these coals which reduced ash sintering was relatively high content of kaolinite

  1. Abstracts Book of Jubilee Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    2000-01-01

    Scientific Assemblies of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry are most important chemical discussion forum organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as sections and symposia topics: organic chemistry, physical chemistry (chemical kinetics, catalysis, thermodynamics), membranes and membrane processes, biological chemistry, biotechnology, metalorganic compounds and complexes, polymer chemistry, crystallochemical study, spectroscopy in nowadays chemistry, supramolecular chemistry, chemistry and technology of coal, high-energetic materials, environment protection, didactics in chemistry, radiation chemistry, photochemistry, electrochemistry, chemistry and technology of carbohydrates, theoretical and computer chemistry, young scientists forum, history of chemistry

  2. Abstracts Book of 41. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1998-01-01

    Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important scientific forum of Polish Chemists. The state of the art in many basic, fundamental and applied investigations has been presented and discussed. The following scientific sessions and microsymposia have been proposed: theoretical chemistry; molecular interactions; metal compounds - chemical, physical, electronic and biological aspects; catalysis and surface physico-chemistry; polymers - radiochemistry, modifications, physics and analytical methods; organic and bioorganic chemistry; physico-chemistry of condensed matter; chemical metallurgy; environmental protection; inorganic technology; chemistry and technology of coal; radiation chemistry; analytical chemistry; chemical engineering; young scientists forum; chemical didactics; petrochemistry; energetic materials; membranes and membrane processes; medical chemistry

  3. Residual coal exploitation and its impact on sustainable development of the coal industry in China

    International Nuclear Information System (INIS)

    Zhang, Yujiang; Feng, Guorui; Zhang, Min; Ren, Hongrui; Bai, Jinwen; Guo, Yuxia; Jiang, Haina; Kang, Lixun

    2016-01-01

    Although China owns large coal reserves, it now faces the problem of depletion of its coal resources in advance. The coal-based energy mix in China will not change in the short term, and a means of delaying the coal resources depletion is therefore urgently required. The residual coal was exploited first with a lower recovery percentage and was evaluated as commercially valuable damaged coal. This approach is in comparison to past evaluations when the residual coal was allocated as exploitation losses. Coal recovery rates, the calculation method of residual coal reserves and statistics of its mines in China were given. On this basis, a discussion concerning the impacts on the delay of China's coal depletion, development of coal exploitation and sustainable developments, as well as technologies and relevant policies, were presented. It is considered that the exploitation of residual coal can effectively delay China's coal depletion, inhibit the construction of new mines, redress the imbalance between supply and demand of coal in eastern China, improve the mining area environment and guarantee social stability. The Chinese government supports the exploitation technologies of residual coal. Hence, exploiting residual coal is of considerable importance in sustainable development of the coal industry in China. - Highlights: •Pay attention to residual coal under changing energy-mix environment in China. •Estimate residual coal reserves and investigate its exploitation mines. •Discuss impacts of residual coal exploitation on delay of coal depletion in China. •Discuss impacts on coal mining industry and residual coal exploitation technology. •Give corresponding policy prescriptions.

  4. Measurement of the Industrial Collaboration of the Diversified Coal Industry: China Coal Energy Company as an Example

    Directory of Open Access Journals (Sweden)

    Chong-Mao Li

    2017-01-01

    Full Text Available With the diversified development of coal enterprises in China, the industries related to coal, including coal chemical, electric power, transportation, and building materials, have witnessed rapid development. There is a collaboration relation between the coal industries and most of the aforementioned industries. Based on the synergy theory and the theory of industrial cooperation, the collaboration among coal industries is assessed in this research. Examining China Coal Energy Company as an example, this research divides the compound enterprise system into subsystems such as coal-electric, coal-chemical, and coal-equipment. Next, collaboration indices, including market, scale, and management, are created for each subsystem. Then, the overall collaboration degree of the China Coal Energy Company since it was listed was calculated by standardizing data and estimating the order degree of order parameters and subsystems. Thus, a model measuring the industrial collaboration degree of coal enterprises was established to quantitatively reflect the collaboration degree between various industries. At the same time, the factors influencing the collaboration effect between various industries were analyzed so as to improve this effect, which then can provide a decision basis for enterprises.

  5. China’s Strategic Choice of the Coal Industry

    DEFF Research Database (Denmark)

    Guo, Zhengquan; Niu, Dongxiao; Wang, Daojuan

    2012-01-01

    Coal mining industry is one of the most influential industries on environment pollution. In recent years, most studies have shown that green and circular economy is the way to solve the deteriorative environment issue. After introducing green economy theory, including background, concept...... of circular economy model, promoting coal industrial technological progress, improving management and security technological innovation....

  6. E-commerce and the coal industry

    International Nuclear Information System (INIS)

    Bolza, D.

    2000-01-01

    Industry observers currently peg the share of 'spot' contracts in Australia's black coal export market (valued at $9 billion a year) at 15%, compared with only 5% of market share four years ago. This quantum shift in purchasing habits is being driven largely by abundant coal supplies, a multi-source availability of coal, and falling prices - a scenario that is expected to remain unchanged for at least the next three to five years. Contracts are not only becoming shorter, they are also dealing with lower tonnages. And, unlike under older long term contracts, where prices are reset every one to two years, under the modern versions prices are being reset every three to six months. As buyers push to achieve more competitive pricing outcomes and maximise the supply of competitively priced fuel, this forces everyone associated with operating power plants to look for ways to reduce costs and implement higher levels of efficiency, by saving time and paperwork. Net-based trading in coal is happening. The major buyers and sellers operate most of the existing sites. Buyers see the Net as a means of reducing the cost of their fuel; sellers see it as a means of better displaying the product they offer. The use of the Net is seen as providing improved market intelligence, greater transparency, better marketing and service levels and enhanced efficiencies. The one-to-one approach remains a fixture and its future is assured. However, whether the Net will ultimately support independent trading sites similar to those whose income will come from brokering deals is hard to judge. Copyright (2000) CSIRO Energy Technology and Exploration and Mining

  7. One coal miner's perspective on the present United States coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Murray, R.E. [Murray Energy Corp., Pepper Pike, OH (United States)

    2002-07-01

    The President and CEO of the Murray Energy Corporation presented his observations on and concerns about the coal and energy industries in the USA, as a coal miner and an energy trader. He outlines the coal mining operations of the Murray Energy Corporation. He offers critical comments about, for example, some unscrupulous energy trading activities, the future of Powder River Basin coal (which he believes may be curtailed by the introduction of clean coal technologies), the lack of expertise in coal mining, the need to revise the law concerning coal company bankruptcies, the need for the government to provide a means to secure bonds, the need to liberalize black lung disease benefits, and the factors deterring improvement of the performance of the eastern coal industry. He criticises current policy and puts forward some recommendations.

  8. Technical note: Guide to groundwater monitoring for the coal industry

    African Journals Online (AJOL)

    It is well established in literature that the environmental impacts associated with the coal industry are numerous. In respect of South Africa's groundwater resources the major impact of the coal industry is a reduction in groundwater quantity and quality. There is therefore a need to proactively prevent or minimise these ...

  9. An imbalanced development of coal and electricity industries in China

    International Nuclear Information System (INIS)

    Wang, Bing

    2007-01-01

    China's coal and electricity industries have a strong reliance on each other, however, because of excessive invasion of government, it is difficult for these two industries to form a stable, reasonable, and transaction cost-saving relationships, but long-run disputes and quarrels. This paper discusses the pricing policies and transaction relationship between these two industries from the historical perspective. It begins with the discussion of coal. Coal market has become competitive since 1980 due to the system of dual track approach, but coal sold to electricity was still tightly controlled by government-guided pricing. Then the paper examines electricity investment and tariff reform. Unlike coal, entry to electricity generation sector was gradually relaxed but generation and retailing tariffs are still strictly regulated. As energy demand and prices soared after 2002, coal and electricity enterprises are all unsatisfied with the rule of price setting of coal sold to electricity industry. This paper concludes that the deliberate low coal price policy does protect electricity industry from fuel cost fluctuation but harm coal industry. Allocative and productive efficiency are difficult to achieve in the long run

  10. NSW coal industry overview and outlook

    International Nuclear Information System (INIS)

    Hughes, W.

    2003-01-01

    Australia is the fourth-largest coal producer in the world, after China, the USA and India. In 2001, Australia produced some 257 Million tonnes (Mt) of hard coal, with almost 45% of this coming from NSW. Australia is the world's largest exporter of hard coal. In 2001, Australia exported some 193 Mt of hard coal, well ahead of its nearest rival, China, at 91 Mt and South Africa and Indonesia at 69 and 66 Mt respectively. Of the total coal exports from Australia in 2001, nearly 40% came from NSW. Trade in coal is forecast to continue its growth, particularly for thermal coal. Substantial growth in Asian demand for thermal coal is forecast over the next decade. Asian demand is expected to increase from 193 Mt in 2000 to 333 Mt in 2020. By 2020, Asian demand is expected to make up 62% of world seaborne thermal coal trade

  11. BIOMASS UTILIZATION AS A RENEVABLE ENERGY SOURCE IN POLISH POWER INDUSTRY – CURRENT STATUS AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Beata Gołuchowska

    2015-06-01

    Full Text Available The depletion of the conventional energy sources, as well as the degradation and pollution of the environment by the exploitation of fossil fuels caused the development of renewable energy sources (RES, including biomass. In Poland, biomass is the most popular renewable energy source, which is closely related to the obligations associated with the membership in the EU. Biomass is the oldest renewable energy source, and its potential, diversity and polymorphism place it over other sources. Besides, the improvement in its parameters, including an increase in its calorific value, resulted in increasing use of biomass as energy source. In the electric power industry biomass is applied in the process of co-combustion with coal. This process may contribute, inter alia, to the reduction in the emissions of carbon, nitrogen and sulfur oxides. The article presents the characteristics of the biomass burned in power boilers of one of the largest Polish power plants, located in Opole Province (Southern Poland. Besides, the impact of biomass on the installation of co-combustion, as well as the advantages and disadvantages of the co-combustion process not only in technological, but also environmental, economic and social aspects were described.

  12. Coal

    International Nuclear Information System (INIS)

    Muir, D.A.

    1991-01-01

    The international coal market trends are outlined and the place of Australian coal industry is discussed. It is shown that while the world supply and demand for coal has begun to tighten, the demand for coal is expected to remain strong in both Asia and Europe. Consequently, in 1991-1992 Australian black coal production and export returns are forecast to rise by 4% and 7% respectively. 1 fig

  13. Promoting coal industry in China through innovative financing

    International Nuclear Information System (INIS)

    Rong Geng

    1997-01-01

    Since energy has constituted itself a bottleneck in the economic development in China, the development of energy has long become an important element of the country's policies on the industry. Policies and credit operations of the state development bank in support of coal development in China are discussed. To support the coal industrial growth of the country, the State Development Bank has been engaging itself in the coal credit operations. At present in China, 90 % of the funds for the large and medium-sized coal projects are loans from the state banks with the rest 10 % being foreign investment. Actions to attract more foreign investment for China are discussed. (R.P.)

  14. The Philippine coal industry its challenges and opportunities

    International Nuclear Information System (INIS)

    Aragon, Francisco B.

    1997-01-01

    The demand for energy has been increasing over the years especially with the country's accelerated economic growth as we move closer its vision of industrialization by the turn of the century. Pursuant to this, the Department of Energy (DOE) was mandated to ensure the country's energy supply availability at affordable costs with due consideration to environmental concerns. Likewise, our organization, the Philippine Chamber of Coal Mines, Inc. (PHILCOAL), an association of local coal producers has taken the role of continuing its task of promoting the development and growth of the coal industry and to cooperate with the governmental agencies in their program of accelerating the development; growth and stability of the energy's coal sector. This paper will present a brief overview of the current situation of the coal industry, citing among others the country's coal reserves, quality, the industry's performance and the coal supply and demand projected for a five-year period. This paper shall also briefly discuss the government's plan to intensify coal exploration efforts so as to ensure the expansion of the country's production capabilities, the establishment of more terminals and infrastructures and accelerate the implementation of mine-mouth power generation and co-regeneration projects in potential coal areas. The implementation of the government's plan for the coal sector will require substantial capital and this paper will cite the principal areas where local and foreign project can come in. Finally this paper conclusively state that the country will remain a net importer of coal on account of the inability of local coal producers to meet increasing rate and coal demand. (author)

  15. Application of stable environmental isotopes in mine hydrogeology taking Polish coal basins as an example

    International Nuclear Information System (INIS)

    Rozkowski, A.; Przewlocki, K.

    1974-01-01

    Preliminary results of the stable isotope investigations carried out in Polish coal basins are presented. In the case of the Lublin Coal Basin, the extreme values of δ 18 O lie between -10.05 and -4.95 per mille, and of δD from -71. 99 to -41.40 per mille. The tested waters may be divided into two groups regarding the relative isotope content. The first group includes waters with overall mineralization lying between 0.4 and 2.5 g/litre. All the waters from the overburden may be placed in this group, and also most of those from the productive Carboniferous. The low content of heavy isotopes allows this group to be classified as infiltration waters. Hence it must be expected that water inflows to the mines will come from both static and dynamic sources. Waters from the Carboniferous with mineralization higher than 10 g/litre are grouped separately. On the precipitation line these points are shifted to the SMOW values. These waters represent a mixture of relict and infiltration waters. If mining is taken to a depth greater than 1000 m, only a minimal proportion of waters from the dynamic sources in mine inflows need be expected. In the case of the Upper Silesian Coal Basin, extreme values of δ 18 O vary from -11.57 to +0.34 per mille, and δD from -72.9 to -1.2 per mille. From analysis of the diagram showing the relation between δ 18 O and δD contents the deep infiltration of contemporary atmospheric waters in the productive Carboniferous of the northern, hydrogeologically non-isolated sector of the Coal Basin is evident. In the southern isolated sector of the basin no recent freshening of the waters under Tertiary overburden is observed. In the formations of varied geological age occurring below 600 m, relict waters appear. It may therefore be predicted that inflow to new mines scheduled for construction will be from static resources only. (author)

  16. Wear surface studies on coal water slurry nozzles in industrial boilers

    Energy Technology Data Exchange (ETDEWEB)

    Ding Zeliang [Hunan Engineering Technology Key Laboratory of Inorganic and Nonmetal Materials, Hunan University of Technology, Zhuzhou 412008, Hunan Province (China)]. E-mail: dingzl@263.net; Deng Jianxin [Department of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province (China)]. E-mail: jxdeng@sdu.edu.cn; Li Jianfeng [Department of Mechanical Engineering, Shandong University, Jinan 250061, Shandong Province (China)]. E-mail: ljf@sdu.edu.cn

    2007-07-01

    In this study, Al{sub 2}O{sub 3}/(W,Ti)C ceramic, WC/Co cemented carbide, and 1Cr18Ni9Ti stainless steel were produced to be used as nozzle materials in coal water slurry (CWS) industry boilers. Coal water slurry burning tests with these nozzles were carried out. The wear surface features of the nozzles made from these materials were examined. The results showed that the wear mechanisms of nozzles varied from entry to exit. The material removal of Al{sub 2}O{sub 3}/(W,Ti)C ceramic nozzle in CWS atomizing and burning is attributed to a mixed mode damage by brittle fracture, polishing, thermal cracking and chipping. The nozzle entry section appears to be entirely brittle in nature with evidence of large scale-chipping. The centre bore area showed a polishing effect with a very smooth surface. While the exit section exhibits cracking owing to the large thermal shock. Examination of the eroded bore surface of the WC/Co cemented carbide nozzles demonstrated that the wear occurred through preferential removal of the metal binder (Co) followed by pluck-out of the exposed WC grains at the entry zone, while the center and the exit zone showed polishing action. The primary wear mechanisms of 1Cr18Ni9Ti stainless steel nozzle exhibited plastic deformation at the entry zone, and plowing and micro-cutting at the other zones by the eroded particles.

  17. Generic types of competitive strategies in the polish retail industry

    OpenAIRE

    Pilarczyk, B.; Stefanska, М.

    2013-01-01

    The aim of the paper is to indicate the evolution of competitive strategies implemented by retail chains (particularly foreign ones) on the Polish market. The basic incentive to choose them is aiming at achieving competitive advantage on international and global scale. Generic strategies defined by M. Porter – strategies of cost leadership, product differentiation and focus constitute the theoretical background for the discussion. Work is funded by the NCN grant based on the decision number D...

  18. Papers of All-Polish Conference on Nuclear Techniques in Industry, Medicine, Agriculture and Environmental Protection

    International Nuclear Information System (INIS)

    2002-01-01

    These proceedings comprise papers presented at All-Polish Conference on nuclear techniques in industry, medicine, agriculture and environmental protection. Most of the papers are in the field of uses of radiation sources and particle beams in industry, radiation chemistry, nuclear medicine and dosimetry, environmental sciences

  19. DEVELOPMENT OF INTRA-INDUSTRY TRADE AS A MEASURE OF COMPETITIVENESS OF THE POLISH FOOD SECTOR

    OpenAIRE

    Iwona Szczepaniak

    2013-01-01

    This article aims at analysing the significance of the intra-industry trade in the Polish foreign trade in agri-food products and assessment of the competitiveness of the Polish food sector on this basis. The analysis uses, first of all, the index introduced by Grubel and Lloyd (hereinafter referred to as GL index), which is a commonly used indicator of intra-industry trade intensity and one of the measures of international competitiveness. The analysis showed that in the period of Poland’s m...

  20. Coal chemical industry and its sustainable development in China

    International Nuclear Information System (INIS)

    Xie, Kechang; Li, Wenying; Zhao, Wei

    2010-01-01

    China is rich in coal resource, which is vital for energy security in this country. In early 21st century, the coal chemical industry in China will be oriented to the development of high efficiency, safety, cleanliness, and optimum utilization. In this review, the authors present an introduction to the utilization status of primary energy production and consumption in China. Since 2005, fundamental research studies, supported by the Ministry of Science and Technology of Chinese National Basic Research Program, have been carried out at Taiyuan University of Technology. The Ministry stresses that the new coal chemical industry should be developed in a sustainable manner to realize effective utilization of energy. Moreover, upgrading the high technology to improve actively the recycling processes of coal chemical engineering is of strategic importance to realize the modern coal chemical engineering.

  1. Application of multiple sorption model to estimation of CO2 sequestration capacity or CH4 recovery in polish hard coals

    Directory of Open Access Journals (Sweden)

    Jodłowski Grzegorz

    2017-01-01

    Full Text Available The aim of the study is to estimate the theoretical capacity of coal deposits in terms of carbon dioxide storage and methane recovery estimate during the injection of carbon dioxide. The Multiple Sorption Model was used for this purpose. The range of sorption measurement data on which the simulations were based does not exceed the critical point for both methane and carbon dioxide. The model allows to calculate absorption, adsorption, expansion and total theoretical sorption. For further consideration absorption was used as the process of the percolation of the gas in the bulk of the coal matter as well as the total theoretical sorption, the occurrence of which is possible due to the presence of fractures in the coal seam. Calculated levels of absorption and the total theoretical adsorption were applied to estimate the possible storage capacity of carbon dioxide based on the data associated with the content of coal in the mining fields of individual Polish coal mines. Moreover, MSM development for the gas mixture sorption can be used to roughly assess the recovery of methane naturally occurring in coal deposits during such a process.

  2. Comparison of Methane Control Methods in Polish and Vietnamese Coal Mines

    OpenAIRE

    Borowski Marek; Kuczera Zbigniew

    2018-01-01

    Methane hazard often occurs in hard coal mines and causes very serious accidents and can be the reason of methane or methane and coal dust explosions. History of coal mining shows that methane released from the rock mass to the longwall area was responsible for numerous mining disasters. The main source of methane are coal deposits because it is autochthonous gas and is closely related with carbonification and forming of coal deposits. Degree of methane saturation in coal deposits depends on ...

  3. Clean coal technologies in Japan: technological innovation in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-12-15

    This brochure reviews the history clean coal technologies (CCT) in Japan and systematically describes the present state of CCT insofar. The brochure contains three parts. Part 1. CCT classifications; Part 2. CCT overview; and Part 3. Future outlook for CCT. The main section is part 2 which includes 1) technologies for coal resources development; 2) coal-fired power generation technologies - combustion technologies and gasification technologies; 3) iron making and general industry technologies; 4) multi-purpose coal utilization technologies - liquefaction technologies, pyrolysis technologies, powdering, fluidization, and co-utilisation technologies, and de-ashing and reforming technologies; 5) Environmental protection technologies - CO{sub 2} recovery technologies; flue gas treatment and gas cleaning technologies, and technologies to effectively use coal has; 6) basic technologies for advanced coal utilization; and 7) co-production systems.

  4. A newer concept of setting up coal refineries in coal utilising industries through environmentally sound clean coal technology of organosuper refining of coals

    International Nuclear Information System (INIS)

    Sharma, D.K.

    1994-01-01

    In order to reduce the losses of premium organic matter of coal and its immense potential energy which is present in the form of stronger interatomic and intramolecular bonding energies, a newer and convenient technique of recovering the premium organic matter from low grade coals by organosuper-refining technique which operates under ambient pressure conditions has been developed. The residual coal obtained can be used as environmentally clean fuel or as a feedstock for the industries based on carbonization and gasification. It is suggested that a beginning be made by setting up coal refineries in coal utilizing industries on the basis of the presently developed new technology of organosuper-refining of coals to recover premium grade organic chemical feed stocks from coals before utilizing coal by techniques such as bubble bed or recirculatory fluidized bed or pulverized coal combustion in thermal power stations, carbonization in steel plants or other carbonization units, gasification in fertilizer industries or in integrated coal gasification combined cycle power generation. Thus, coal refineries may produce value added aromatic chemical feed stocks, formed coke or coke manufacturing; and carbon fillers for polymers. (author). 100 refs., 1 fig

  5. Chances of coal in European power industry

    Science.gov (United States)

    Łukaszczyk, Zygmunt; Badura, Henryk

    2017-11-01

    Poland's accession to the European Union has reduced the remnants of import barriers. Moreover, the consolidation and commercialization of the energy sector, the implementation of climate package elements and a whole host of other determinants have caused hard coal mining to begin functioning in a highly competitive market, and its negotiating position, as well as the possibility of survival, depends not only on the level of coal prices in international markets, but also on internal competition. This paper discusses the position of power coal on international markets and presents some current problems concerning the functioning of particular segments of the hard coal market in the European Union and Poland in terms of opportunities and threats that are a result of climate and energy policy.

  6. Crowding-out effect of coal industry investment in coal mining area: taking Shanxi province in China as a case.

    Science.gov (United States)

    Li, Li; Lei, Yalin; Xu, Qun; Wu, Sanmang; Yan, Dan; Chen, Jiabin

    2017-10-01

    The rapid development of coal industry in Shanxi province in China has important effects on its economic development. A large amount of money has been invested into the coal industry and other related industries during the recent years. However, research on the investment effect of Shanxi's coal industry was rare. In order to analyze the investment effect of coal industry, based on the crowding-out effect model, cointegration test, and the data available in Shanxi Statistical Yearbooks, this paper calculates the effect between coal industry investment and other 17 industry investment. The results show that the investment of coal industry produces crowding-out effect on food industry, building materials industry, and machinery industry. Increasing 1% of the coal industry investment can reduce 0.25% of the food industry investment, or 0.6% of building materials industry investment, or 0.52% of the machinery industry investment, which implies that Shanxi province should adjust coal industrial structure, promote the balance development of coal industry and other industries, so as to promote its economic growth.

  7. Indian coal industry for a quantum jump ahead

    Energy Technology Data Exchange (ETDEWEB)

    Chowdhary, S.K. (Coal India Ltd., Calcutta (India))

    1992-12-01

    A broad overview is presented by India's coal industry with special reference to Coal India Ltd. (CIL) which contributes about 90% of total coal production. Coal is by far the most abundant energy source in India. Figures show the increase in production from opencast and underground mining (roughly in the ratio 2:1) since 1980, and projections for continued production in 2001-02. Technologies needed to realize the projected growth are discussed. Improved equipment, haulage facilities and communications systems should continue to contribute to the production capacity of large opencast mines. Mechanisation of the bord and pillar system is envisaged as the key to rapid growth in underground production. A vast potential has been identified in the beneficiation of non-coking coal to meet demands for use of power coal power generation. Several new technologies are being tried at CIL to aid exploration, and computerization is being applied in several areas within the industry. A COALNET Plan is being implemented to establish an integrated information management system covering operations throughout the company. Improvements are being made in the rail transport, distribution and quality control of coal. Attention is being paid to the environmental impacts of coal mining. 5 tabs., 3 photos.

  8. Preliminary assessment of coal-based industrial energy systems

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    This report presents the results of a study, performed by Mittelhauser Corp. and Resource Engineering, Inc. to identify the potential economic, environmental, and energy impacts of possible New Source Performance Standards for industrial steam generators on the use of coal and coal-derived fuels. A systems-level approach was used to take mine-mouth coal and produce a given quantity of heat input to a new boiler at an existing Chicago industrial-plant site. The technologies studied included post-combustion clean-up, atmospheric fluidized-bed combustion, solvent-refined coal liquids, substitute natural gas, and low-Btu gas. Capital and operating costs were prepared on a mid-1985 basis from a consistent set of economic guidelines. The cases studied were evaluated using three levels of air emission controls, two coals, two boiler sizes, and two operating factors. Only those combinations considered likely to make a significant impact on the 1985 boiler population were considered. The conclusions drawn in the report are that the most attractive applications of coal technology are atmospheric fluidized-bed combustion and post-combustion clean-up. Solvent-refined coal and probably substitute natural gas become competitive for the smaller boiler applications. Coal-derived low-Btu gas was found not to be a competitive boiler fuel at the sizes studied. It is recommended that more cases be studied to broaden the applicability of these results.

  9. Coal

    International Nuclear Information System (INIS)

    Teissie, J.; Bourgogne, D. de; Bautin, F.

    2001-12-01

    Coal world production represents 3.5 billions of tons, plus 900 millions of tons of lignite. 50% of coal is used for power generation, 16% by steel making industry, 5% by cement plants, and 29% for space heating and by other industries like carbo-chemistry. Coal reserves are enormous, about 1000 billions of tons (i.e. 250 years of consumption with the present day rate) but their exploitation will be in competition with less costly and less polluting energy sources. This documents treats of all aspects of coal: origin, composition, calorific value, classification, resources, reserves, production, international trade, sectoral consumption, cost, retail price, safety aspects of coal mining, environmental impacts (solid and gaseous effluents), different technologies of coal-fired power plants and their relative efficiency, alternative solutions for the recovery of coal energy (fuel cells, liquefaction). (J.S.)

  10. Digging Deeper: Crisis Management in the Coal Industry

    Science.gov (United States)

    Miller, Barbara M.; Horsley, J. Suzanne

    2009-01-01

    This study explores crisis management/communication practices within the coal industry through the lens of high reliability organization (HRO) concepts and sensemaking theory. In-depth interviews with industry executives and an analysis of an emergency procedures manual were used to provide an exploratory examination of the status of crisis…

  11. Use of alternative fuels in the Polish cement industry

    Energy Technology Data Exchange (ETDEWEB)

    Mokrzycki, Eugeniusz; Uliasz-Bochenczyk, Alicja [Polish Academy of Sciences, Mineral and Energy Economy Research Inst., Krakow (Poland); Sarna, Mieczyslaw [Lafarge Cement Polska S.A., Malogoszcz (Poland)

    2003-02-01

    Alternative fuels are made up of mixtures of different wastes, such as industrial, municipal and hazardous wastes. These fuels need to have an appropriate chemical energy content which depends on the type of components and their organic content. An industry that is particularly well suited to the employment of alternative fuels is the cement industry. There are a number of factors that promote the use of alternative fuels in cement kilns. Of these factors, the most notable are: the high temperatures developed, the appropriate kiln length, the long period of time the fuel stays inside the kiln and the alkaline environment inside the kiln. There are a number of countries that use their own alternative fuels in cement plants. These fuels have different trade names and they differ in the amounts and the quality of the selected municipal and industrial waste fractions used. The fuels used should fall within the extreme values of parameters such as: minimum heating value, maximum humidity content, and maximum content of heavy and toxic metals. Cement plants in Poland also use alternative fuels. Within the Lafarge Group, the cement plants owned by Lafarge Poland Ltd. have initiated activities directed at promoting the wider use of alternative fuels. There are a number of wastes that can be incinerated as fuel in cement plants. Some that can be mentioned are: selected combustible fractions of municipal wastes, liquid crude-oil derived wastes, car tyres, waste products derived from paint and varnish production, expired medicines from the pharmaceutical industry and others. The experience gained by the cement plants of Lafarge Cement Poland Ltd confirms that such activities are economically and ecologically beneficial. The incineration of alternative fuels in cement plants is a safe method for the utilisation of waste that is ecologically friendly and profitable for the industrial plants and society alike. (Author)

  12. Planning for reliable coal quality delivery considering geological variability : A case study in polish lignite mining

    NARCIS (Netherlands)

    Naworyta, W.; Sypniowski, S.; Benndorf, J.

    2015-01-01

    The aim of coal quality control in coal mines is to supply power plants daily with extracted raw material within certain coal quality constraints. On the example of a selected part of a lignite deposit, the problem of quality control for the runof-mine lignite stream is discussed. The main goal is

  13. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    2005-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 6 problem sessions as follow: Environmental protection, earth sciences, protection of cultural objects; Industrial applications; applications in medicine, medical apparatus; measurement methods, simulations, experiment planning; radiation techniques; laboratories, metrology

  14. International competitiveness of the Polish wood industry from the mesoeconomic perspective

    OpenAIRE

    Wanat, Leszek; Wojciech, Lis

    2012-01-01

    The competitiveness of the Polish forest and wood industry, in particular the wood market itself, is determined by many factors which are shaping – to a various extent – its basic measure, i.e. a share of the industry or each of its sectors in the open international market. Due to a significant share of the wood industry in the generation of Poland's GDP, constant measurement and verification of this sector's competitiveness, both ex-ante and ex-post, seem to be of extreme importance. Next to...

  15. Particulate pollution levels in Katowice, a highly industrialized polish city

    Science.gov (United States)

    Pastuszka, Jozef; Hlawiczka, Stanislaw; Willeke, Klaus

    Particulate measurements made in Katowice, Poland, in 1989 (prior to political changes in Eastern Europe and the resulting decrease in industrial production) indicate total suspended particulate levels that are 3-10 times higher than in other European cities. The concentrations of cadmium, nickel and manganese were also significantly higher than in other places in Europe. However, lead concentrations were comparable to European cities with high automobile traffice. The modes and concentration levels of the Katowice aerosol were highly direction dependent, which indicates that most of the sampled particles were locally or regionally emitted into the atmosphere.

  16. Coordinate transformation of an industrial robot and its application in deterministic optical polishing

    Science.gov (United States)

    Wang, Wei; Yu, Guoyu; Xu, Min; Walker, David

    2014-05-01

    An IRB6620 industrial robot from ABB Co. Ltd. (Zurich, Switzerland) is used as a processing platform for optical processing, and computer-controlled optical surfacing is applied as a key technology. The function of each coordinate system of the robot in processing is reviewed, as well as the relationship of each coordinate system and coordinate transformation. An algorithm governing coordinate transformations is provided. In order to assess the functionality of the robot as a polishing instrument, experiments have been designed so that the removal rate and surface form error correction of the robot facility have been compared with those from established computer numerical control polishing. The importance for the application of industrial robot in optical processing is also presented.

  17. Managing Scarce Water Resources in China's Coal Power Industry

    Science.gov (United States)

    Zhang, Chao; Zhong, Lijin; Fu, Xiaotian; Zhao, Zhongnan

    2016-06-01

    Coal power generation capacity is expanding rapidly in the arid northwest regions in China. Its impact on water resources is attracting growing concerns from policy-makers, researchers, as well as mass media. This paper briefly describes the situation of electricity-water conflict in China and provides a comprehensive review on a variety of water resources management policies in China's coal power industry. These policies range from mandatory regulations to incentive-based instruments, covering water withdrawal standards, technological requirements on water saving, unconventional water resources utilization (such as reclaimed municipal wastewater, seawater, and mine water), water resources fee, and water permit transfer. Implementing these policies jointly is of crucial importance for alleviating the water stress from the expanding coal power industry in China.

  18. The South African coal industry - a millennium review

    Energy Technology Data Exchange (ETDEWEB)

    Lind, G.H.; Phillips, H.R. [University of Witwatersrand, Johannesburg (South Africa)

    2001-06-01

    South Africa is a significant contributor to southern Africa and Europe's coal needs and is expected to remain in this important position for the foreseeable future. This review paper of the South African coal mining industry highlights that, although abundant, the easily mineable reserves will become depleted within the next quarter century. Socio-economic issues of unique, local importance such as the HIV/AIDS pandemic as well as policies propagated by South Africa's post-apartheid government are detailed, as are programmes in research and development that will ensure that South Africa's long term coal industry is, at the every least, maintained. 11 refs., 9 figs., 7 tabs.

  19. Polish origins of the Faculty of Mathematical and Natural Sciences of the University of Fribourg and the Polish contribution to the Fribourg industrial revolution (in Polish

    Directory of Open Access Journals (Sweden)

    Wojciech KOCUREK

    2015-12-01

    Full Text Available The article is dedicated to high-tech companies founded by Poles at the end of the 19th century in the rural canton of Fribourg in Switzerland. The text is divided into two parts. In the first part, the author attempts to present the economic, social and political reality of Fribourg in a period of intense industrialization in the world and the formation of the liberal free market system. In this rapidly changing reality, the new Catholic-conservative authorities of the canton tried to lead to establishing of a comprehensive, but also different system of a “Christian republic”, whose aim was to achieve social justice consistent with the teachings of the Gospel. In order to complete the project, the cantonal government did not shy away from using the possibilities and measures offered by the contemporary world. Decision-makers, led by Georges Python, needed support from the society, who was aware of the changes. Due to this fact, it became necessary to establish a university capable of shaping new attitudes and views. However, the costs significantly exceeded the financial capabilities of the agricultural and relatively poor canton of Fribourg. In these less favourable circumstances, a conscious policy of industrialization was the way out of the deadlock. Newly created industrial institutions were to contribute to an increase of cash inflows to the canton and thus allow for the financing of the university, which would also become an intellectual foundation for the emerging industry. The activity of Polish scientists, which is the subject of the second part of the article, matched this philosophy perfectly. The Poles invited to cooperate with Python, i.e. Józef Wierusz-Kowalski, Ignacy Mościcki and Jan Modzelewski, created the foundations of the Faculty of Mathematical and Natural Sciences at the University of Fribourg. As members of the faculty, in addition to teaching, they conducted research into, among other things, nitric acid

  20. Comparison of Methane Control Methods in Polish and Vietnamese Coal Mines

    Directory of Open Access Journals (Sweden)

    Borowski Marek

    2018-01-01

    Full Text Available Methane hazard often occurs in hard coal mines and causes very serious accidents and can be the reason of methane or methane and coal dust explosions. History of coal mining shows that methane released from the rock mass to the longwall area was responsible for numerous mining disasters. The main source of methane are coal deposits because it is autochthonous gas and is closely related with carbonification and forming of coal deposits. Degree of methane saturation in coal deposits depends on numerous factors; mainly on presence or lack of insulating layers in cover deposit that allow or do not on degasification and easily methane outflow into surroundings. Hence in coal mining there are coal deposits that contain only low degree of methane saturation in places where is lack of insulating layers till high in methane coal deposits occurring in insulating claystones or in shales. Conducting mining works in coal deposits of high methane hazard without using of special measures to combat (ventilation, methane drainage could be impossible. Control of methane hazard depends also on other co-occuring natural dangers for which used preventive actions eliminate methane hazard. Safety in mines excavating coal deposits saturated with methane depends on the correct estimation of methane hazard, drawn up forecasts, conducted observations, hazard control as well as undertaken prevention measures. Methane risk prevention includes identification and control methods of methane hazards as well as means of combating the explosive accumulation of methane in longwall workings. The main preventive actions in underground coal mines are: effective ventilation that prevents forming of methane fuses or placed methane accumulation in headings ventilated by airflow created by main fans and in headings with auxiliary ventilation, methane drainage using drain holes that are drilled from underground headings or from the surface, methanometry control of methane concentration in

  1. Comparison of Methane Control Methods in Polish and Vietnamese Coal Mines

    Science.gov (United States)

    Borowski, Marek; Kuczera, Zbigniew

    2018-03-01

    Methane hazard often occurs in hard coal mines and causes very serious accidents and can be the reason of methane or methane and coal dust explosions. History of coal mining shows that methane released from the rock mass to the longwall area was responsible for numerous mining disasters. The main source of methane are coal deposits because it is autochthonous gas and is closely related with carbonification and forming of coal deposits. Degree of methane saturation in coal deposits depends on numerous factors; mainly on presence or lack of insulating layers in cover deposit that allow or do not on degasification and easily methane outflow into surroundings. Hence in coal mining there are coal deposits that contain only low degree of methane saturation in places where is lack of insulating layers till high in methane coal deposits occurring in insulating claystones or in shales. Conducting mining works in coal deposits of high methane hazard without using of special measures to combat (ventilation, methane drainage) could be impossible. Control of methane hazard depends also on other co-occuring natural dangers for which used preventive actions eliminate methane hazard. Safety in mines excavating coal deposits saturated with methane depends on the correct estimation of methane hazard, drawn up forecasts, conducted observations, hazard control as well as undertaken prevention measures. Methane risk prevention includes identification and control methods of methane hazards as well as means of combating the explosive accumulation of methane in longwall workings. The main preventive actions in underground coal mines are: effective ventilation that prevents forming of methane fuses or placed methane accumulation in headings ventilated by airflow created by main fans and in headings with auxiliary ventilation, methane drainage using drain holes that are drilled from underground headings or from the surface, methanometry control of methane concentration in the air; location

  2. Electronic commerce: wiring the coal industry for new data technology

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.A.

    1998-07-01

    Industry pundits predict that coal by wire may some day replace much of the industry`s long-distance shipping requirements and their attendant costs, but data by wire, also known as electronic commerce (EC) can today offer coal producers and customers the means to gather and send large volumes of data cheaply and quickly. EC`s major components - electronic data interchange (EDI), bar-coding, smart codes, radio frequency `D`, and the internet - can reduce costs in equipment-intensive industries such as mining. The US National Mining Association sponsored a forum to discuss these alternatives at its 1998 Electronic Commerce Summit held in Tuscon, Arizona, 18-20 May. A report is given of discussions at the forum and contacts are given for sources of EDI information.

  3. World coal trade 2006 - another successful year for the industry

    Energy Technology Data Exchange (ETDEWEB)

    Jones, T. [e-coal.com (United Kingdom)

    2007-02-15

    The international coal industry enjoyed another successful year in 2006, with new records set and firm prices remaining after the previous strong years for the producers. This was of course not without the various problems and changes that occur each year. This article reviews the main issues and trends that came to light in 2006. 13 figs., 5 tabs., 3 photos.

  4. Occupational exposure to selected isocyanates in Polish industry

    Directory of Open Access Journals (Sweden)

    Sławomir Brzeźnicki

    2015-06-01

    Full Text Available Background: Isocyanates constitute a group of highly reactive, low molecular weight chemicals used worldwide for polyurethane manufacturing. The occupational exposure to these compounds is a major cause of occupational asthma, thus it is very important to monitor their concentration in the workplace atmosphere. The aim of the study was to measure the concentration of 4,4’-methylenediphenyl diisocyanate (MDI; CAS 101-68-8, toluene-2,4-di-isocyanate (2,4-TDI; CAS 584-84-9, toluene-2,6-di-isocyanate (2,6-TDI; CAS 91-08-7 and hexamethylene di-isocyanate (HDI; CAS 822-06-0 in the work environment for evaluation of the occupational exposure to these compounds. Material and Methods: Determination of concentrations of selected isocyanates was carried out in 21 manufacturing plants, during different industrial processes. The collected air samples (personal samples were analyzed by means of the high-performance liquid chromatography (HPLC. Results: The presented results represent the 1st data on the occupational exposure to isocyanates in Poland. This set of data is generally indicative of concentrations of analyzed isocyanates that are low and do not exceed the maximum admissible concentration (MAC values in Poland. Elevated concentrations (above the MAC value were found only for the TDI in the course of manufacturing of polyurethane foam blocks. Conclusions: Results of many studies show that low concentrations of isocyanates (particularly of low volatility like for example MDI in the air cannot exclude the possibility of additional absorption of these compounds through skin. Taking into consideration all the uncertainties associated with the evaluation of the risk of exposure to isocyanates based solely on measurement of their levels in the air, it would seem that the simultaneous application of environmental and biological monitoring would only facilitate a reliable assessment of the occupational exposure risk. Med Pr 2015;66(3:291–301

  5. Rapid development of China's coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Han, H.

    1978-11-01

    Since China relies mainly on coal for fuel, the development of the industry has a direct bearing on the national economic growth. The aim is to double the present output after ten years of hard work, produce as much again as in 1987 by the end of this century and mechanize the mines as soon as possible. In the next ten years China is planning to build, step by step, a number of large coal mining bases mainly in east, central--south and northeast China, and at the same time expand the Kailan, Tatung, and several other big coal centers. The aim is to achieve regional selfsufficiency. The key to speedy development of the coal industry lies in mechanization. Many mines have, in the last few years, geared their efforts to this requirement. Although productivity and some major economic and technical standards in China's coal industry today compare unfavorably with the world's advanced levels, Chinese miners and management alike are determined to catch up with and surpass world standards in the shortest possible time. The target is to achieve full mechanization within the next ten years. The biggest mines will be equipped with coal cutters and tunnelling machines, continuous transport facilities, automatic winders, preparation plants, and computerized communications and dispatching systems. China must rely on its own abilities to achieve this aim but at the same time will not hesitate to import some of the world's most advanced techniques and equipment. Measures will have to be taken to raise the scientific and technical level of the workforce to meet the needs of mechanization.

  6. Freeform surface grinding and polishing by CCOS based on industrial robot

    Science.gov (United States)

    Liu, HaiTao; Wan, YongJian; Zeng, ZhiGe; Xu, LiChao; Zhao, HongShen; Fang, Kai

    2016-10-01

    The grinding and polishing of freeform surface by using Computer Controlled Optical Surfacing (CCOS) technology are discussed. Instead of using Computer Numeric Control (CNC) machine, a 6-axises industrial robot TX200 from Stäubli Co. Ltd. is used as the motion platform. In order to perform the movement that CCOS technology needs, the coordinate system of the robot in processing is reviewed and the offline programming method for robot is presented. The material removal experiments during grinding and polishing process on the robotic CCOS platform are been carried out. A rectangular toroid surface workpiece and a circular off-axis parabolic surface workpiece are being fabricated on the robotic CCOS platform, and the latest results will be discussed here.

  7. Development trends in the Lusatian brown coal mining industry

    International Nuclear Information System (INIS)

    Schwirten, D.

    1994-01-01

    Lusatia has lived on and with brown coal for over 200 years. Brown coal changed what was once a region in which forestry and agriculture predominated into an industrial region. Thanks to its good combustion properties and high energy yield brown coal very soon became known and popular. It was always the driving force for a rapid development which resulted in an economically sound and technically up-to-date industry in Lusatia. This powerful status of brown coal was however soon exploited for aims which were bound to lead to the downfall of two social structures (during the years from 1933 to 1990) by reason of a regime of unconditional autarchy. The economic and technical development thus initiated certainly brought many advantages, but it also had serious diadvantages. Constant increases in production, as a result of which planned rated outputs were intentionally disregarded, were the rule because production targets had to be met or exceeded. Economic inefficiency led to a scarcity of labour and a shortage of finances. Environmental aims had no priority since production was the absolute, primary objective. Consequently, this regime of economic autarchy ended in an one-way street as far as industry was concerned, a situation which was accompanied by an unexampled destruction of the natural basic living conditions and direct, threatening health hazards to man and nature. The year 1990 saw the beginning of the transition from planned controlled economy to free market economy. The reorganization of the former large combines as corporations was not however merely a formal change, but internally also represented a transformation. The brown coal mining industry manifested its new intention and determination to be economically competitive and unsubsidized in future, to operate in such a way as to be compatible with the environment and to exploit reserves carefully, as well as to render its activities socially compatible. (orig.) [de

  8. Development program to support industrial coal gasification. Quarterly report 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-15

    The Development Program to Support Industrial Coal Gasification is on schedule. The efforts have centered on collecting background information and data, planning, and getting the experimental program underway. The three principal objectives in Task I-A were accomplished. The technical literature was reviewed, the coals and binders to be employed were selected, and tests and testing equipment to be used in evaluating agglomerates were developed. The entire Erie Mining facility design was reviewed and a large portion of the fluidized-bed coal gasification plant design was completed. Much of the work in Task I will be experimental. Wafer-briquette and roll-briquette screening tests will be performed. In Task II, work on the fluidized-bed gasification plant design will be completed and work on a plant design involving entrained-flow gasifiers will be initiated.

  9. Survey of industrial coal conversion equipment capabilities: rotating components

    Energy Technology Data Exchange (ETDEWEB)

    Williams, W. R.; Horton, J. R.; Boudreau, W. F.; Siman-Tov, M.

    1978-04-01

    At the request of the Major Facilities Project Management Division of the Energy Research and Development Administration, Fossil Energy Division, a study was undertaken to determine the capabilities of U.S. industry to supply the rotating equipment needed for future coal conversion facilities. Furthermore, problem areas were to be identified and research and development needs determined for producing advanced designs of the required equipment: Pumps, compressors, hydraulic turbines, and gas expanders. It has been concluded that equipment for essentially all clean-stream applications likely to be encountered in coal conversion facilities is generally available except high-pressure oxygen compressors. These oxygen compressors as well as slurry pumps need to be developed or significantly upgraded. Also, fans and blower for dirty-gas streams need developmental work, as do expanders for high-temperature service. Hydraulic turbines, which were not specified but which might be used for slurry applications in future coal conversion plants, are not available.

  10. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    1998-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised

  11. The impact of the structural features of the rock mass on seismicity in Polish coal mines

    Science.gov (United States)

    Patyńska, Renata

    2017-11-01

    The article presents seismic activity induced in the coal mines of the Upper Silesian Coal Basin (GZW) in relation to the locations of the occurrence of rockbursts. The comparison of these measurements with the structural features of the rock mass of coal mines indicates the possibility of estimating the so-called Unitary Energy Expenditure (UEE) in a specific time. The obtained values of UEE were compared with the distribution of seismic activity in GZW mines. The level of seismic activity in the analysed period changed and depended on the intensity of mining works and diverse mining and geological conditions. Five regions, where tremors occurred (Bytom Trough, Main Saddle, Main Trough, Kazimierz Trough, and Jejkowice and Chwałowice Trough) which belong to various structural units of the Upper Silesia were analyzed. It was found out that rock bursts were recorded only in three regions: Main Saddle, Bytom Trough, and Jejkowice and Chwałowice Trough.

  12. A supply chain based assessment of water issues in the coal industry in China

    International Nuclear Information System (INIS)

    Pan Lingying; Liu Pei; Ma Linwei; Li Zheng

    2012-01-01

    Shortages of water and geographically uneven distribution of coal and water pose great challenges to sustainable development of the coal industry in China. In this paper, we illustrate the major challenges existing in the coal industry from a supply chain viewpoint, and propose technical and policy suggestions to address them. First, we provide quantitative information about water withdrawal, consumption, waste water recycling and treatment and pollution from coal mining, preparation, to final conversion for China's power generation and coal-to-chemical industry. We then analyze scenarios of water use in China's coal industry between 2020 and 2030. Our results show that water issues are becoming increasingly severe constraints for coal development in China, especially in North and West China, where water is more scarce and ecological systems are more vulnerable than other regions. Without implementing effective water-saving measures or regulations the water demand in the coal industry could dramatically increase and probably exceed China's water supply capacity in the near-term future, bringing substantial uncertainty to sustainable development of China's energy economy. We also illustrate that coal-fired power generation, with appropriate technical improvement and proper policy supports, has the greatest potential for water savings in the coal industry. Our conclusions also underscore the importance of expanding energy efficiency and renewable energy in China so as to limit the country's dependence on coal. - Highlights: ► We provide information of water supply and use in the coal industry in China. ► We analyze scenarios of water use in China's coal industry between 2020 and 2030. ► Water issues are becoming severe constrains for the coal industry in China. ► The water demand in the coal industry could exceed China's water supply capacity. ► Coal-fired power generation has great potential for water savings.

  13. Survey of industrial coal conversion equipment capabilities: valves

    Energy Technology Data Exchange (ETDEWEB)

    Bush, W. A.; Slade, E. C.

    1978-06-01

    A survey of the industrial capabilities of the valve and valve-actuator industry to supply large, high-pressure stop valves for the future coal conversion industry is presented in this report. Also discussed are development and testing capabilities of valve and valve-actuator manufacturers and anticipated lead times required to manufacture advanced design valves for the most stringent service applications. Results indicate that the valve and valve-actuator industry is capable of manufacturing in quantity equipment of the size and for the pressure and temperature ranges which would be required in the coal conversion industry. Valve manufacturers do not, however, have sufficient product application experience to predict the continuing functional ability of valves used for lock-hopper feeders, slurry feeders, and slag-char letdown service. Developmental and testing efforts to modify existing valve designs or to develop new valve concepts for these applications were estimated to range from 1 to 6 years. A testing facility to simulate actuation of critical valves under service conditions would be beneficial.

  14. Multi - party Game Analysis of Coal Industry and Industry Regulation Policy Optimization

    Science.gov (United States)

    Jiang, Tianqi

    2018-01-01

    In the face of the frequent occurrence of coal mine safety accidents, this paper analyses the relationship between central and local governments, coal mining enterprises and miners from the perspective of multi - group game. In the actual production, the decision of one of the three groups can affect the game strategy of the other of the three, so we should assume the corresponding game order. In this order, the game analysis of the income and decision of the three is carried out, and the game decision of the government, the enterprise and the workers is obtained through the establishment of the benefit matrix and so on. And then on the existing system to optimize the coal industry regulation proposed practical recommendations to reduce the frequency of industry safety accidents, optimize the industry production environment.

  15. CO2-ECBM and CO2 Sequestration in Polish Coal Seam – Experimental Study

    Directory of Open Access Journals (Sweden)

    Paweł Baran

    2014-01-01

    Originality/value: The results indicate successful sorption of carbon dioxide in each experiment. This provides the rationale to study the application of the coal tested to obtain methane genetic origin genetic methane with the use of the CO2 injection.

  16. The Case of Coal Water Slurry Fuel for Industrial Use in Pakistan

    OpenAIRE

    Muhammad Irfan; Mohammad A. Irfan; Afzal Khan; Irfan Ullah; Noman Wazir

    2015-01-01

    This research presents the case for design and development of Coal Water Slurry (CWS) Plant for industrial use in Pakistan. After exclusive comparison between coal quality quantification for CWS it was found that Darra mines at Pakistan provide best coal for CWS. Highly volatile, A and B Bituminous coal and Sub-Bituminous coal is selected for making CWS because of its low Sulfur contents, Ash contents and high heating value through experimentation. The purpose of this research was to present ...

  17. The pilot survey of the industry 4.0 principles penetration in the selected Czech and Polish companies

    Directory of Open Access Journals (Sweden)

    Josef Basl

    2016-10-01

    Full Text Available The article deals with the aspects of the ICT innovation based on the development of the internet of things in industrial branches. This trend is known as the Industry 4.0, e.g. the forth industrial revolution. The article presents main results of the pilot survey done in selected Czech and Polish companies. They show the current status of the Industry 4.0 understanding and penetration in companies, incl. expected benefits and known obstacles of this trend.

  18. Pyrolisator Coal to be Cokes (Coal Cokes Casting Metal Industry Standard

    Directory of Open Access Journals (Sweden)

    Sukamto

    2016-01-01

    Full Text Available Pyrolisis of coal is partial combustion to reduce total moisture, volatile matter and sulfur contens and increase the calorific value of coal. The results of pyrolysis of coal is coke. At the laboratory level studies, pyrolisis done in batch using different calorie, namely 5800, 6000, 6300 kcal/kg and a time of 15-60 minutes and the temperature 400-800°C. Maximum results obtained total moisture (0.44%, fixed carbon (89%, volatile matter (2.4%, sulfur content (undetected and ash (7.2%. Then applied to the scale miniplant with continuous processes using multitube pyrolisator which are designed to operate in the temperature range 400-800°C and a flow rate of 240-730 kg/h, obtained coal cokes that meets industry quality standards, namely TM (0.42%, FC (90.40%, VM (2.16%, S (not detected, Ash (6.8% incalori 6300 kcal/h, a flow rate of 240 kg / h and temperatures between 600-700°C

  19. Economics of the coal industry east of the Mississippi, 1973-1982

    Science.gov (United States)

    Bhagwat, S.B.

    1987-01-01

    Government regulations on health, safety and environment have been poppular blamed for the declining productivity in U.S. coal mines since 1970. The stagnation in the coal industry east of the Mississippi is alleged to have been caused by this declining productivity and by the growth of cheaper and cleaner coal production west of the Mississippi. Economic evidence suggests, however, that productivity declines were more due to a relative lowering of labor costs in comparison with coal prices and due to work stoppages. The development of western coals fields was spurred by growth in local demand and had only a relatively small impact on coal production east of the Mississippi. Problems of the eastern coal industry are rooted mainly in slow economic growth in eastern U.S. which must be addressed in the long-term interests of the eastern coal industry. ?? 1987.

  20. Coal, the metamorphoses of an industry. The new geopolitics of the 21. century

    International Nuclear Information System (INIS)

    Martin-Amouroux, J.M.

    2008-01-01

    Coal consumption is growing up so fast and coal reserves are so abundant that coal might overtake petroleum in the future. The worldwide environment will not gain anything in this evolution except if 'clean coal' technologies make a significant jump. What is the driving force of this coal development? The pitfall encountered by nuclear energy and the rise of natural gas prices have been favorable conditions for the development of coal but they cannot hide the worldwide metamorphosis of coal industry. From China, undisputed world leader, to the USA, without omitting India, Russia and the big exporting countries (Australia, Indonesia, South Africa, Colombia), a new map is drawing up. In all these countries, coal companies are concentrating and internationalizing, open new strip mines and new commercial paths. The understanding of this metamorphosis has become one of the keys of the energy prospective and geopolitics of the 21. century. Content: 1 - entering the 21. century with the energy source of the 19. century?; 2 - consumption growth: new trends; 3 - the USA: the Saudi Arabia of coal; 4 - the unexpected rebirth of coal in Russia; 5 - China, world leader of coal industry; 6 - India and south-east Asia are entering the race; 7 - the rise of exporting industries; 8 - international markets and competitive dynamics of industries; 9 - advantage and drawbacks of coal during the coming decades; 10 - will clean coal technologies be ready on time?; 11 - technical appendix. (J.S.)

  1. Preliminary results of measurements of unattached fraction of radon progeny in Polish coal mines

    International Nuclear Information System (INIS)

    Skubacz, K.; Lebecka, J.; Michalik, B.; Reineking, A.

    1996-01-01

    The aim of this work was better recognizing and understanding of the radiation exposure of miners in underground coal mines. Within the project supported by EC we have built an equipment for measurements of unattached fraction of radon daughters. We performed measurements of unattached fraction of radon daughters in two chosen mines using the built equipment. Preliminary results of measurements performed in 14 place in two mines show that in some places the unattached fraction of radon progeny is higher than 5% known from literature. These results also indicate, that it seems to be a relation between the concentration of unattached fraction and between the humidity of air and respirable dust concentration. (author)

  2. Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

    Science.gov (United States)

    Phuong, Vu Hung

    2018-03-01

    This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

  3. Microfine coal firing results from a retrofit gas/oil-designed industrial boiler

    Energy Technology Data Exchange (ETDEWEB)

    Patel, R.; Borio, R.W.; Liljedahl, G. [Combustion Engineering, Inc., Windsor, CT (United States)] [and others

    1995-11-01

    Under US Department of Energy, Pittsburgh Energy Technology Center (PETC) support, the development of a High Efficiency Advanced Coal Combustor (HEACC) has been in progress since 1987 at the ABB Power Plant Laboratories. The initial work on this concept produced an advanced coal firing system that was capable of firing both water-based and dry pulverized coal in an industrial boiler environment.

  4. Teaching History, Teaching Nationalism: A Qualitative Study of History Teachers in a Polish Post-Industrial Town

    Science.gov (United States)

    Jaskulowski, Krzysztof; Surmiak, Adrianna

    2017-01-01

    This paper aims to analyse Polish history teachers' perceptions of the role of historical education in the context of nationalism, class and locality. Drawing on the results of qualitative research conducted in the post-industrial and post-German city of Walbrzych in Poland, we argue that teachers are not fully aware of the role of nationalist…

  5. The impact of resource tax reform on China's coal industry

    International Nuclear Information System (INIS)

    Liu, Huihui; Chen, ZhanMing; Wang, Jianliang; Fan, Jihong

    2017-01-01

    Contributing to approximately two-thirds of primary energy consumption, coal usage is the focus of China's energy policies. To regulate the resource taxation system and reduce the burden of coal enterprises, the Chinese government launched a reform of its resource tax system in 2014 for coal, introducing the ad valorem system to replace the volume-based system that had been in place for the preceding thirty years. To assess the impact of the tax reform, this paper constructs two-stage dynamic game models by taking the coal and coal-fired power industries as the players. The market situations of shortage and oversupply are investigated separately. Empirical data are collected to estimate the model parameters for numerical simulations. The model results suggest that the tax reform will reduce both coal prices and the coal industry profitability if the tax levied on each ton of coal is maintained at the same level as before the reform, regardless of whether the market is in a shortage or an oversupply situation. However, the increased buyer's power will amplify the effect of the tax reform. The numerical simulations also provide an estimation of the tax rate of the ad valorem system that maintains the profit of the coal industry. Considering the demand and supply situations in China's coal market, policy recommendations are provided to guide further reform of China's resource tax system. - Highlights: • The paper examines the influence of resource tax reform on China's coal industry. • We construct two-stage game models between coal and coal-fired power industries. • Market situations of shortage and oversupply are studied in two taxation systems. • Coal price will decrease if maintaining the tax levied on each ton of coal the same. • To achieve the reform objective, the ad valorem tax rate should not be set too high.

  6. Summaries of the 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1997-01-01

    Annual 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry has been held in Gdansk on 22-26 September 1997. The most valuable scientific results obtained in Polish Laboratories have been presented in 22 main sections and 7 symposia directed especially at following subjects: analytical chemistry, biochemistry, solid state chemistry and material science, physical chemistry, heteroorganic and coordination chemistry, medical and pharmaceutical chemistry, metalorganic chemistry, inorganic and organic chemistry, polymers chemistry, chemistry and environment protection, theoretical chemistry, chemical didactics, photochemistry, radiation chemistry and chemical kinetics, chemical engineering, catalysis, crystallochemistry, chemical technology, electrochemistry, and instrumental methods

  7. The US coal industry, 1970--1990: Two decades of change

    International Nuclear Information System (INIS)

    1992-01-01

    The purpose of this report, is to provide a comprehensive overview of the US coal industry over the past two decades, with emphasis on the major changes that occurred, their causes, and their effects. The report presents and analyzes data compiled by the Energy Information Administration (EIA) on the US coal industry, as well as EIA data on other energy sources and information from non-EIA sources where relevant. These data are used to reveal trends in coal production, consumption, distribution, and prices. Trends in coal mining productivity and employment are also examined, and the profitability of major energy companies' coal operations is tracked over the 1977 through 1990 period. Analysis of the data indicates the impacts on the coal industry of major events such as the oil embargo, technological breakthroughs, and Federal and State laws and regulations affecting the industry

  8. Coal in Europe: what future?: prospects of the coal industry and impacts study of the Kyoto Protocol

    International Nuclear Information System (INIS)

    Rudianto, E.

    2006-12-01

    From the industrial revolution to the 1960's, coal was massively consumed in Europe and its utilization was constantly raised. In the aftermath of World War II, coal had also an important part in reconstruction of Western Europe's economy. However, since the late 1960's, its demand has been declining. There is a (mis)conception from a number of policy makers that saying coal mining and utilizations in Europe is unnecessary. Therefore in the European Union (EU) Green Paper 2000, coal is described as an 'undesirable' fuel and the production of coal on the basis of economic criteria has no prospect. Furthermore, the commitment to the Kyoto Protocol in reducing greenhouse gases emission has aggravated this view. Faced with this situation, the quest for the future of coal industry (mining and utilization) in the lines of an energy policy is unavoidable. This dissertation did a profound inquiry trying to seek answers for several questions: Does the European Union still need coal? If coal is going to play a part in the EU, where should the EU get the coal from? What should be done to diminish negative environmental impacts of coal mining and utilization? and finally in regard to the CO 2 emission concerns, what will the state of the coal industry in the future in the EU? To enhance the analysis, a system dynamic model, called the Dynamics Coal for Europe (the DCE) was developed. The DCE is an Energy-Economy-Environment model. It synthesizes the perspectives of several disciplines, including geology, technology, economy and environment. It integrates several modules including exploration, production, pricing, demand, import and emission. Finally, the model emphasizes the impact of delays and feed-back in both the physical processes and the information and decision-making processes of the system. The calibration process for the DCE shows that the model reproduces past numbers on the scale well for several variables. Based on the results of this calibration process, it can

  9. Conceptual approaches to forming a strategy of innovation-based development of the coal industry

    OpenAIRE

    DRACHUK YU. Z.; RASSUZHDAY L.M.; TRUSHKINA N.V.

    2014-01-01

    The paper substantiates conceptual approaches to forming a strategy of innovation-based development of the national coal industry, which consist in defining the basis for using a portfolio approach to the management of innovation projects at the enterprise; consideration of uncertainty and risk factors when evaluating innovation projects; government regulation of market mechanisms in the implementation of innovation-based development of the coal industry; prove of coal-mining enterprises’ cap...

  10. Energy survey of the coal based sponge iron industry

    Directory of Open Access Journals (Sweden)

    Nishant R. Dey

    2015-09-01

    Full Text Available A survey is made on a typical coal based Indian sponge iron plant of capacity 500 t/d in order to identify the largest energy losses and find ways to increase the efficiency. The required data are obtained by measurements or taken from production industries. The process efficiency is about 51.31%. The energy balances of the process show that the gap between theoretical and actual energy consumption is 45.2% and the exhausts make up the largest loss of 43.5%. A huge amount of waste gas is generated during operation and substantial part of it associated with the waste gas, remains unutilized. The energy content in the exhaust gases which is found at useful temperature can be used in three different ways: by internal use; by external energy supply; or by power generation. The four possible potential areas are identified where energy is being lost and untapped. The largest improvements would be made by design modifications adopting a novel energy conservation scenario by process integration and thereby decreasing the coal and water consumption and by decreasing the cold fresh air.

  11. Computer application in coal preparation industry in China

    Energy Technology Data Exchange (ETDEWEB)

    Lu, M.; Wu, L.; Ni, Q. (China Univ. of Mining and Technology, Xuzhou (China))

    1990-01-01

    This paper describes several packages of microcomputer programs developed for designing and managing the coal preparation plants. Three parts are included: Coal Cleaning Package (CCP), Coal Preparation Optimization Program (CPO) and Coal Preparation Computer Aided Design System (CPCAD). The function of CCP is: evaluating and predicting coal cleaning result. Coal presentation process modelling and optimization; coal preparation flowsheet design and optimization. The CPO is a nonlinear optimization program. It can simulate and optimize the profit for different flowsheet to get the best combination of the final products. The CPCAD was developed based upon AutoCAD and makes full use of AutoLISP, digitizer menus and AutoCAD commands, combining the functions provided by AutoCAD and the principle used in conventional coal preparation plant design, forming a designer-oriented CPCAD system. These packages have proved to be reliable, flexible and easy to learn and use. They are a powerful tool for coal preparation plant design and management. (orig.).

  12. The effect of China's globalisation on the South African coal mining equipment (OEM) industry / Ramona Naidoo

    OpenAIRE

    Naidoo, Ramona

    2007-01-01

    The study looks at the mining equipment industry as coal mining equipment is a subsector within this industry. This study seeks to create an understanding of how the coal mining equipment industry in South Africa is affected by the emergence of China as a mining equipment supplier. China's globalisation is set to continue and will impact all industries. China's African Policy will also impact the African continent, as China will continue to invest and use Africa's mineral resources. Sourcing ...

  13. Research on the competitiveness and development strategy of china's modern coal chemical industry

    Science.gov (United States)

    Wang, Q.; Han, Y. J.; Yu, Z. F.

    2016-08-01

    China's modern coal chemical industry has grown into a certain scale after over a decade of development, and remarkable progress has been made in key technologies. But as oil price collapsed since 2015, the economic benefit of the industry also slumped, with loud controversies in China over the necessity of modern coal chemical industry. The research believes that the modern coal chemical industry plays a positive role in the clean and sustainable exploitation of coal in China. It makes profit when oil price is no lower than 60/bbl, and outperforms petrochemical in terms of cost effectiveness when the price is between 60/bbl and 80/bbl. Given the low oil price and challenges posed by environmental protection and water restraints, we suggest that the state announce a guideline quickly, with adjusted tax policies and an encouragement to technological innovation, so that the modern coal chemical industry in China can grow sound and stable.

  14. The contemporary coal industry: dancing to faster music

    Energy Technology Data Exchange (ETDEWEB)

    Knapp, R. [World Coal Institute, London (United Kingdom)

    1997-09-01

    Within a framework that supports sustainable development, the issues of changing coal markets, environmental policy and climate change, and the positive marketing of coal as a solution to energy demand are discussed. Changes affect both domestic and international markets, and each subset of the market is different. In Europe, coal consumption is declining in contrast with expanding Asian energy markets. Clean coal technologies improve efficiency and make coal more acceptable. The greatest reductions in carbon dioxide emissions can be realized within the least efficient areas of coal consumption, in particular the domestic markets in Asia, eastern Europe, and Africa.

  15. Bio-coal briquettes made from South Sumatera low rank coal and palm shell charcoal for using in small industries

    Directory of Open Access Journals (Sweden)

    Sipahutar Riman

    2017-01-01

    Full Text Available The objective of this study is to blend the South Sumatera low rank coal and palm shell charcoal for producing bio-coal briquettes which have better fuel properties. The experimental study for making bio-coal briquettes was carried out to examine the effect of raw material composition and binder type on the quality of the briquettes produced. A screw conveyor machine equipped with a three blade stirred and designed with the length of 40 cm, mixing process diameter of 10 cm and the capacity of 2 kg bio-coal briquettes per hour was used to produce bio-coal briquettes ready to use in small industries. Proxymate analyses of the South Sumatera low rank coal, palm shell charcoals and bio-coal briquettes were conducted in accordance with the American Society of Testings and Materials (ASTM standards and the calorific value was determined by using a Bomb calorimeter. The experimental results showed that the calorific value of bio-coal briquette was greatly influenced by the raw material composition and the binder type. The highest calorific value was 6438 (cal/g at the sampel of SSC65-PSC20-B15(2.

  16. Statistical Analysis of Sino-U.S. Coal Mining Industry Accidents

    OpenAIRE

    Guiling Wei

    2011-01-01

    Both China and the United States are large countries in coal production and consumption, however, the safety conditions of coal mining production in China are much worse than that of the U.S.. Although the Chinese Administration of Coal Mine Safety improved safety measures to tighten control on coal mining industry, the number of accidents, death toll and fatality rate per million tons were much higher than those of the U.S. in recent years. Based on the statistical analysis of Sino-U.S. coal...

  17. Question marks of the Czech coal mining industry

    International Nuclear Information System (INIS)

    Dopita, M.; Pesek, J.

    1995-01-01

    An overview of brown and black coal mining in the Czech Republic is presented, and problems of the extent of coal reserves and of the profitability of deep black coal mining are discussed. Costs of coal mining in foreign countries are given. Coal mining in the Czech Republic can be expected to be loss-making unless coal prices are increased. Since coal resources in the Czech Republic are limited, additional nuclear power plants will have to be constructed or else coal for power generation will have to be imported. The environmental aspects of coal mining and burning are discussed. Medium-term and long-term solutions to reduce the environmental burden include thermal power plant desulfurization, application of the fluidized-bed combustion regime to coals with large ash and/or sulfur contents, and introduction of gas in towns and power plants. In the short run, large-scale consumers in towns and coal basins should be obliged to accumulate reserves of low-sulfur coal for later use. (J.B.). 2 tabs., 3 figs., 8 refs

  18. W(h)ither the coal industry? The long-term view

    International Nuclear Information System (INIS)

    Schobert, H.H.; Rusinko, F. Jr.; Mathews, J.P.

    1998-01-01

    Global warming--real or imaginary, friend or foe, carbon dioxide emissions a threat to the planet, benign, or good for agriculture--while the debate rages on, the debaters occasionally seem to pause long enough to agree on one point: coal is the bad guy. There is little doubt that coal combustion must continue as a major contributor to the energy economy for the near to mid-term future. It is likely, though, those environmental pressures on conventional processes for coal utilization will only intensify. This factor alone makes questionable the long-term future. Environmental issues also severely impact the metallurgical coke industry. The traditional coal industry and coal markets of the 20th century are under increasingly intense assault. But why waste coal by burning it? Steady progress is being made in two directions for using coal as a valuable hydrocarbon resource. On the one hand, continuous improvements in computer-based structural modeling, which now include the ability to calculate not only a molecular structure that is consistent with chemical facts, but also some of the physical properties and even the incorporation of water. The increasing reasonableness of such structures places one on the verge of being able to do rational organic chemistry on coals, that is, deliberately to select coals as starting materials for certain desired chemical transformations that will produce high-value chemical products in good yields. This opens a route to chemicals from coal that does not rely on by-product coal tars as the feedstock. On the other hand, excellent opportunities also exist for coals as precursors to high-value carbon materials. Anthracites in particular represent an under-exploited, and as yet poorly explored, opportunity for conversion to graphitic materials. Taking coal in both directions high-value chemicals and premium carbon products represent profitable opportunities for innovation, leadership, and new directions for the coal industry in the 21st

  19. The nexus of the coal industry and the state in Australia: Historical dimensions and contemporary challenges

    International Nuclear Information System (INIS)

    Baer, Hans A.

    2016-01-01

    This article presents a historical account of the close relationship between the coal mining industry and the federal and various state governments, thus over time building a state/coal industry nexus in Australia. It examines (1) an early colonial stage extending from the late 18th century to around the time of Federation in 1902 when the nexus emerged; (2) an intermediate stage from the early 20th century to the late 1970s when the nexus became solidified; and (3) a late stage from the early 1980s to the present day when the corporate sector came to dominate the nexus. Both Coalition and Australian Labor Party governments have consistently supported the exploitation of Australia's coal and natural gas, including recently coal seam gas, and supported the expansion of coal ports. An opposition movement has called for leaving coal and coal seam gas in the ground and shifting Australia’s energy production to renewable sources, particularly solar and wind energy. The article highlights how the nexus between coal mining and the state inhibits action on climate change. It argues this can be transcended by energy policy directed at socializing coal mining, wedded to a program of transitioning it to renewable energy production. - Highlights: • A close nexus exists between the coal industry and the state in Australia. • An anti-coal movement has developed in recent years in Australia. • Breaking the coal industry/state nexus requires socialization of energy production. • This would enable a shift from reliance on coal to renewable energy sources.

  20. Waste pyritic coal as a raw material for energetic industry

    Energy Technology Data Exchange (ETDEWEB)

    Gasiorek, J. [Institute of Inorganic Chemistry, Poznan (Poland). Dept. of Research and Technology

    1997-11-01

    Results are presented of large laboratory studies on coal desulphurisation with foam flotation method improved by application of bioadsorption of Thiobacillus ferrooxidans bacteria to the modification of superficial properties of pyrite particulates from hydrophobic to hydrophillic ones. Results of coal desulfurization with and without bioadsorption have been compared. Bioadsorption improved pyritic sulfur removal by 30% (for coal from `Sierza mine`, coal size 0.3 to 0.102 mm, S pyritic content 1.69%) after 6-week adaptation of bacteria and 30 min of bioadsorption. Bacteria concentration in 5% water suspension of coal reached 22 {mu}g of biomass cm{sup -3}. 12 refs., 4 figs., 1 tab.

  1. Neo-industrialization of Kuzbass economy in innovative development of coal industry and machinery

    Directory of Open Access Journals (Sweden)

    Balabanova Anna

    2017-01-01

    Full Text Available As part of rental-resource model and access restrictions to capital and new technologies, the attempts to encourage import substitution made by the government do not generate innovative type of economic development and reconstruction of economy’s manufacturing industry competitive on the domestic market. In conditions of searching for a new model of Russian economy development the analysis of a number of problems such as industry degradation, reducing the competitiveness of Russian producers, the growth of structural imbalances and overcoming the negative macroeconomic trends becomes strategically important. This raises the value of neo-industrialization as the integrator of resource security, scientific and industrial potential of Russian economy and high capacity of the domestic market in the innovative development system. A special role neo-industrialization plays for the economic development of old industrial regions, which include Kuzbass (Western Siberia, Russia. Neo-industrial development of Kuzbass economy should be initiated by the technological modernization of mining machinery and innovative development of coal industry.

  2. Materials of 44. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    2001-01-01

    Scientific assemblies of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: solid state chemistry; didactics of chemistry; electrochemistry; biologically active compounds; geochemistry; organic chemistry; physical chemistry; environment quality and protection; coordination chemistry; chemical technology; polymers; explosive materials; analytical chemistry; theoretical chemistry

  3. Assessment of industrial energy options based on coal and nuclear systems

    International Nuclear Information System (INIS)

    Anderson, T.D.; Bowers, H.I.; Bryan, R.H.; Delene, J.G.; Hise, E.C.; Jones, J.E. Jr.; Klepper, O.H.; Reed, S.A.; Spiewak, I.

    1975-07-01

    Industry consumes about 40 percent of the total primary energy used in the United States. Natural gas and oil, the major industrial fuels, are becoming scarce and expensive; therefore, there is a critical national need to develop alternative sources of industrial energy based on the more plentiful domestic fuels--coal and nuclear. This report gives the results of a comparative assessment of nuclear- and coal-based industrial energy systems which includes technical, environmental, economic, and resource aspects of industrial energy supply. The nuclear options examined were large commercial nuclear power plants (light-water reactors or high-temperature gas-cooled reactors) and a small [approximately 300-MW(t)] special-purpose pressurized-water reactor for industrial applications. Coal-based systems selected for study were those that appear capable of meeting environmental standards, especially with respect to sulfur dioxide; these are (1) conventional firing using either low- or high-sulfur coal with stack-gas scrubbing equipment, (2) fluidized-bed combustion using high-sulfur coal, (3) low- and intermediate-Btu gas, (4) high-Btu pipeline-quality gas, (5) solvent-refined coal, (6) liquid boiler fuels, and (7) methanol from coal. Results of the study indicated that both nuclear and coal fuel can alleviate the industrial energy deficit resulting from the decline in availability of natural gas and oil. However, because of its broader range of application and relative ease of implementation, coal is expected to be the more important substitute industrial fuel over the next 15 years. In the longer term, nuclear fuels could assume a major role for supplying industrial steam. (U.S.)

  4. New coal-fired generation: a summary of developments and impacts to the US coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Morey, M. [RDI Consulting, Boulder, CO (United States)

    2001-07-01

    20 overheads/slides summarise the coverage of this presentation. RDI has identified close to 34000 NW of proposed new coal-fired generating capacity in the USA. The talk reviewed where new plants may be built, the coal combustion technologies they will employ, sources of coal supply and transport, and plant retirements and offsets. Government policy today favours construction of large plants to ensure security of supply in regions where new base loaded capacity is needed. Costs of producing power from coal and natural gas are compared. Impacts of new plants to coal suppliers and coal transporters are considered. RDI will publish a study on winners and losers in the race for new coal-fired generation in July 2001.

  5. GAS AND COAL EXTRACTIVE INDUSTRY DURING THE SOCIALIST INDUSTRIALIZATION PERIOD (1948-1989

    Directory of Open Access Journals (Sweden)

    MARIUS BULEARCA

    2015-12-01

    Full Text Available This article shows that since 1949 the extractive industry has undergone a strong process of restructuring when enterprises were nationalized and a strict control over all components of the economy was established. The new leadership of the country had the intention of developing the industrial sector as well, basically laying the foundations of the new Romanian economy where the industrial sector economy would bring considerable income. This program will lead to the development of the energy sector in Romania also, thus contributing to a great extent to the development and consolidation of coal and gas extraction. Despite of all the economic and social development achieved during the period 1950-1989, at the end of it, Romania ranked a marginal position in the European countries hierarchy since between its level of development and the market economy developed countries large gaps in respect to the main economic and social indicators occurred.

  6. E-commerce finally finds the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Hudson, M.

    2000-12-01

    In the last few months, new web sites have come online which are not only showcase for coal mining products and equipment but also act as sales platforms. A large set of sites deal with the purchase of coal and other raw materials. Most of them offer 24-hour news updates, a coal library and a reference section to help with financing, insurance and transportation of purchased coal. Another group focuses on the sale of equipment. Short writeups are given of 18 web sites. 1 photo.

  7. Market Structure Differences Impacting Australian Iron Ore and Metallurgical Coal Industries

    Directory of Open Access Journals (Sweden)

    Kurt Lawrence

    2015-07-01

    Full Text Available Steelmaking relies on iron ore and metallurgical coal as main ingredients, the trade of which is hypothesized to theoretically change in tandem. However, strong correlation is not evident in historical trade prices of steelmaking inputs. To determine causes to this occurrence, the market factors that influence the Australian iron ore and metallurgical coal industries were studied. Data was collected over the past decade for worldwide resource production and trade quantities of crude steel, iron ore, and metallurgical coal. The data was analysed to reveal trends, allowing examination of the macroeconomic trade of metallurgical coal and iron ore with relation to worldwide and country specific steel production. It was determined that the influential growth of China’s steel production has spurred the growth of worldwide iron ore demand, which was met with increased production and supply, from Australia. The increased metallurgical coal demand has been met with increased production within China locally. Measures of supply elasticity were created for worldwide iron ore and metallurgical coal trade, where comparisons between Australia’s industries to the relevant greatest competitor were examined. The results, along with respective resource production data, highlighted the elevated competitive position that Australian iron ore producers enjoy compared to metallurgical coal producers. Trade characteristics revealed the different market structures that iron ore and metallurgical coal industries operate in, prompting a discussion of the effects these markets have on the two Australian industries.

  8. Coal and its perspectives in Poland

    International Nuclear Information System (INIS)

    Locatelli, C.

    1993-01-01

    The seminar held in Warsaw by the CIFOPE from 23 to 25 november 1992 was centered around the restructuring of the coal industry and its implications for the Polish economy in the context of the current deep-running economic reforms. Partly based on French experience, this seminar shed some light on long-term problems for Poland like the kind of industrial policy that will be needed to avoid desertification problems, the need for price reform in the pursuit of profitability, and the networks and financial aids needed to restructure on such a large scale, considering that coal is a key sector in the Polish economy

  9. Nuclear techniques in the coal industry. Proceedings of a final research co-ordination meeting

    International Nuclear Information System (INIS)

    1995-11-01

    With the aim of promoting advanced research and facilitating a more extensive application of nuclear techniques for environmental protection in the exploration and exploitation of coal, the IAEA established the present co-ordinated research programme (CRP) in 1989. This report includes an assessment of the current status and trends in nuclear techniques in the coal industry and the results obtained by the participants at the CRP. Proceedings of the final CRP on ''Nuclear Techniques in Exploration and Exploitation of Coal: On-line and Bulk Analysis and Evaluation of Potential Environmental Pollutants in Coal and Coke'', was held in Krakow, Poland, from 9 to 12 May 1994. Refs, figs, tabs

  10. The Kyoto Protocol and the coal industry in Colombia

    International Nuclear Information System (INIS)

    Viana Rubio, Edgar

    1998-02-01

    In this article is studied the possible incidence of the commitments reached in the Kyoto Protocol on the coal market, making emphasis in the Colombian case. Projections, made in a study of Hill y Associates, points out that in a scenario of greenhouse gases emissions reduction, the market of the thermal coal will be seriously affected by the incidence on their demand

  11. Central Appalachia in advanced capitalism: its coal industry structure and coal operator associations

    Energy Technology Data Exchange (ETDEWEB)

    Walls, D.S.

    1978-01-01

    This study traces the origins of the notion that Appalachia constitutes a unique social-problem region, examines the models of Appalachian problems popularized during the 1960s, proposes an alternative framework for situating the Central Appalachian coalfields, and examines aspects of the coal industry's structure in the Central Appalachian region. The idea of Appalachia as a distinctive social problem region was created between 1890 and 1930 by a social movement affiliated with various Protestant church home mission boards and organizationally focused in the Conference of Southern Mountain Workers and Berea College. The movement stressed an environmental explanation of regional problems. During the 1960s, three explanatory models of Appalachian poverty and underdevelopment achieved prominence: the subculture of poverty model, the regional development model, and the internal colonialism model. Each contributed to a regionalized conception of Appalachian problems. Empirical studies show the subculture of poverty model to fail as an explanation of regional underdevelopment. In the absence of a critique of domination and a redistribution of power and wealth, the regional development model serves as a rationalization of existing structures of privilege. The internal colonialism model provides a critique of domination, but not the most appropriate one. This study argues that the above models should not be viewed as mutually exclusive formulations, and that they may be reconstructed to represent different dimensions of social existence.

  12. The South African coal mining industry: A need for a more efficient and collaborative supply chain

    Directory of Open Access Journals (Sweden)

    David Pooe

    2011-11-01

    Full Text Available It is estimated that about two-thirds of global coal is used for power generation and that, in the next 20 years, over 70% of the demand for coal will come from China and India. Coal accounts for approximately 41% of the world's electricity generation. Demand for thermal coal is influenced by factors that include availability, prices of competing products such as oil, gas and nuclear power, and the demand for electricity. The aim of this article is to provide an exposition of supply chain dynamics within the South African coal mining industry and to argue for a more efficient and collaborative supply chain. The authors attempt to investigate at local and global level, the current trends pertaining to the level of reserves, production and consumption of coal. The article further demonstrates the shortcomings of current logistics in meeting the demand for coal in both domestic and export markets. The article draws from secondary data sourced from academic papers, government and agency documents in the exposition of the coal mining supply chain. The paper concludes by recommending the need for a scientific study on supply chain constraints facing the coal mining industry in South Africa.

  13. Secondary Industrial Minerals from Coal Fly Ash and Aluminium Anodising Waste Solutions

    NARCIS (Netherlands)

    Nugteren, H.W.

    2010-01-01

    Minerals that are extracted from the earth’s crust to be directly used for their properties are called industrial minerals. This research shows that such minerals can also be produced from industrial residues, hence the name secondary industrial minerals. In this thesis coal fly ash is chosen as one

  14. Reserve reporting in the United States coal industry

    International Nuclear Information System (INIS)

    Grubert, Emily

    2012-01-01

    United States energy policymaking can be better supported with accurate and consistent data on coal reserves, both in the public and private sectors. In particular, reserve data for coal and other energy resources should be directly comparable so that decision-makers can easily understand the relationship among available resources. Long-term policy and investment choices regarding energy security, the environment, and resource allocation depend on accurate information, but existing and easily available data on the magnitude of geologically, environmentally, economically, socially, and legally accessible coal reserves are of insufficient quality to guide such decisions. Even still, these data are often presented for use in policy and energy analysis. Currently, coal reserves are overstated relative to competitor energy resource reserves, in part because coal reporting standards have historically been more liberal and vague than standards for resources like natural gas. Overstating the marketable coal resource could lead to inefficient allocation of limited capital investment that can be difficult to reverse. US government bodies like the Energy Information Administration, United States Geological Survey, Securities and Exchange Commission, and Bureau of Land Management can help correct deficiencies by clarifying standards and collecting data that are relevant for decision-makers, such as energy-based reserve information. - Highlights: ► US Coal reserves are important to public and private policy and investment decisions. ► Poor quality data and coal reserve overreporting misrepresent reality. ► Choices made based on bad information can lead to long-term capital misallocation. ► Numerous government agencies are tasked with providing public data on coal reserves. ► Clearer, more restrictive reserves reporting standards can aid decision-makers.

  15. An example of change - the end of apartheid in the South African coal industry

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This publication reports on a visit by four British MPs to the South African Coal Industry (SACI), made under the auspices of the SACI Committee which represents all the major coal exporting companies of South Africa. It is a private industry which operates independently of both the Government and the Chamber of Mines and does not benefit from any Government Subsidies. The aim of the visit was to investigate the SACI against a background of international pressure against an industry which appears to be a major example of change in South Africa. The visit programme included presentations on the South African coal industry in general, industrial relations and safety and research in the mining industry. Visits were made to both an underground mine and an opencast mine, a collieries training college, hospital, school, mine village and a coal terminal. At the end of the visit the delegation drew the conclusions that the South African coal industry is now organised on a totally non-discriminatory basis, offering employment and promotion opportunities to all workers regardless of their race and that there is therefore no justification for singling out this industry as a victim of sanctions policy.

  16. Advanced coal-fueled industrial cogeneration gas turbine system

    Energy Technology Data Exchange (ETDEWEB)

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1991-07-01

    Advances in coal-fueled gas turbine technology over the past few years, together with recent DOE-METC sponsored studies, have served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine can ultimately be the preferred system in appropriate market application sectors. The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. The five-year program consists of three phases, namely: (1) system description; (2) component development; (3) prototype system verification. A successful conclusion to the program will initiate a continuation of the commercialization plan through extended field demonstration runs.

  17. Brown coal - on the way to industrial-scale upgrading

    International Nuclear Information System (INIS)

    Speich, P.

    1981-01-01

    The main fields of development of Rheinische Braunkohlenwerke AG (Rheinbraun) in the field of brown coal upgrading are reported, i.e. production of synthesis gas, SNG, and liquid products. The Rheinbraun research programme involves the processes of high-temperature-Winkler gasification, hydrogasification, hydroliquefaction, tube stills, and methanation plants. In the long run, nuclear power will be indispensable for base load power supply so that brown coal can be upgraded instead of being used directly for electric power generation. (HS) [de

  18. Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

    Science.gov (United States)

    Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

    2016-01-01

    This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

  19. Estimates and Predictions of Coal Workers’ Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study

    Science.gov (United States)

    Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

    2016-01-01

    This research was aimed at estimating possible Coal workers’ pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males’ life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China. PMID:26845337

  20. The polished stone industry from şoimuş - La avicola (ferma 2), Hunedoara County

    NARCIS (Netherlands)

    Ştefan, Cristian Eduard; Dimache, Mǎdǎlina; Petcu, Rǎzvan; Palcu, Dan

    2017-01-01

    In this contribution the polished stone artefacts from the Neolithic settlement at Şoimuş - La Avicola (Ferma 2), Hunedoara County are analysed. These items belong to Turdaş facies and were discovered during rescue excavations on the A1 Motorway route in 2011. The items are analysed from the point

  1. Birth and first steps of mineral coal industry in the USA

    International Nuclear Information System (INIS)

    Martin-Amouroux, Jean-Marie

    2015-10-01

    The author proposes a brief history of the emergence of a mineral coal industry in the USA. He notices that wood has been the first source of energy used by settlers for housing heating, and then in industry and transports for heat and steam production. As demand and supply conditions were bad, coal production, although mining sites had been quickly identified and used, only emerged from the 1840's. Different kinds of coal (anthracite, bitumen) have been extracted depending on the region. Then, urbanisation and industrialisation created new opportunities for coal, and the share of coal regularly increased. The author describes how the coal industry was organised: seven regions, central position of Pittsburgh. He outlines the tremendous growth of coal production between 1840 and 1913; comments the distribution of this production among the different states. He describes and comments how this production has been industrialised. This industrialisation resulted in a dramatic increase of productivity between 1890 and 1910. He finally evokes the rather late creation of federal bodies

  2. Coal, the metamorphoses of an industry. The new geopolitics of the 21. century; Charbon, les metamorphoses d'une industrie. La nouvelle geopolitique du 21. siecle

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Amouroux, J.M

    2008-07-01

    Coal consumption is growing up so fast and coal reserves are so abundant that coal might overtake petroleum in the future. The worldwide environment will not gain anything in this evolution except if 'clean coal' technologies make a significant jump. What is the driving force of this coal development? The pitfall encountered by nuclear energy and the rise of natural gas prices have been favorable conditions for the development of coal but they cannot hide the worldwide metamorphosis of coal industry. From China, undisputed world leader, to the USA, without omitting India, Russia and the big exporting countries (Australia, Indonesia, South Africa, Colombia), a new map is drawing up. In all these countries, coal companies are concentrating and internationalizing, open new strip mines and new commercial paths. The understanding of this metamorphosis has become one of the keys of the energy prospective and geopolitics of the 21. century. Content: 1 - entering the 21. century with the energy source of the 19. century?; 2 - consumption growth: new trends; 3 - the USA: the Saudi Arabia of coal; 4 - the unexpected rebirth of coal in Russia; 5 - China, world leader of coal industry; 6 - India and south-east Asia are entering the race; 7 - the rise of exporting industries; 8 - international markets and competitive dynamics of industries; 9 - advantage and drawbacks of coal during the coming decades; 10 - will clean coal technologies be ready on time?; 11 - technical appendix. (J.S.)

  3. Analysis of the causes and consequences of falls from scaffolding using the Polish construction industry as an example

    Science.gov (United States)

    Hoła, A.; Hoła, B.; Szóstak, M.

    2017-10-01

    The results of research published in many publications indicate that the scale of the problem of accidents at work in the construction industry is significant. Fatal and serious accidents, which in the construction industry are often a result of a fall from a height and associated with working on scaffolding, have a particularly strong impact on society. Systematic controls carried out on Polish construction sites indicate irregularities in the area of ensuring safety on scaffolding. As a result of conducted own studies, dozens of accidents caused by falls from scaffolding were selected from the total number of accidents at work in the construction industry and then analysed. The aim of the research was to identify the causes of these accidents and their consequences. The results of studies conducted in this area will be the content of the article.

  4. Proceedings of the symposium on assessing the industrial hygiene monitoring needs for the coal conversion and oil shale industries

    Energy Technology Data Exchange (ETDEWEB)

    White, O. Jr. (ed.)

    1979-03-01

    This work was supported by the United States Department of Energy, Division of Biomedical and Environmental Research, Analysis and Assessment Program, through the Safety and Environmental Protection Division at Brookhaven National Laboratory. The symposium program included presentations centering around the themes: Recognition of Occupational Health Monitoring Requirements for the Coal Conversion and Oil Shale Industries and Status of Dosimetry Technology for Occupational Health Monitoring for the Coal Conversion and Oil Shale Industries. Sixteen papers have been entered individually into EDB and ERA; six had been entered previously from other sources. (LTN)

  5. Gamma, X-ray and neutron techniques for the coal industry

    International Nuclear Information System (INIS)

    1986-01-01

    Nuclear techniques play a prominent role in all aspects of the coal industry, from exploration through mine development to testing of coal quality during production. The advent of on-line nuclear techniques allows continuous, near real time appraisal of coal quality free from the errors inherent in conventional techniques based on discrete samples. The Advisory Group Meeting reviews the latest developments in this area and makes recommendations on the most promising areas and priorities for future research and development activities. This report records the proceedings of the Advisory Group Meeting. Separate abstracts were prepared for each of the 13 papers in this report

  6. Ways of conserving fuel-energy resources in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Voloshchenko, N.I.; Nabokov, E.P.

    1981-01-01

    A discussion is made of the work undertaken by enterprises and organizations of the coal industry to conserve fuel-energy resources in the tenth Five-Year Plan. An examination is made of the basic organizational-technical measures that have been implemented in this sector for conserving thermal and electrical energy. A presentation is made of the results obtained from the introduction of advanced technological processes and equipment aimed at increasing productivity and reducing operational losses of coal.

  7. Guide to groundwater monitoring for the coal industry

    African Journals Online (AJOL)

    2012-09-27

    Sep 27, 2012 ... have an effective and economical groundwater monitoring system. This paper provides a comprehensive ... try's primary energy requirements, as well as bringing foreign investment into the country. Coal ... tinual population growth, is resulting in a ever-growing demand and impact on South Africa's scarce ...

  8. The Safety Attitudes of Senior Managers in the Chinese Coal Industry

    Science.gov (United States)

    Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

    2016-01-01

    Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

  9. The Safety Attitudes of Senior Managers in the Chinese Coal Industry

    Directory of Open Access Journals (Sweden)

    Jiangshi Zhang

    2016-11-01

    Full Text Available Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5, and six were at a relatively high level (4.5 > mean > 4.0. Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

  10. The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

    Science.gov (United States)

    Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

    2016-11-17

    Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

  11. Coking coal outlook from a coal producer's perspective

    International Nuclear Information System (INIS)

    Thrasher, E.

    2008-01-01

    Australian mine production is recovering from massive flooding while Canadian coal shipments are limited by mine and rail capacity. Polish, Czech, and Russian coking coal shipments have been reduced and United States coking coal shipments are reaching their maximum capacity. On the demand side, the Chinese government has increased export taxes on metallurgical coal, coking coal, and thermal coal. Customers seem to be purchasing in waves and steel prices are declining. This presentation addressed the global outlook for coal as well as the challenges ahead in terms of supply and demand. Supply challenges include regulatory uncertainty; environmental permitting; labor; and geology of remaining reserves. Demand challenges include global economic uncertainty; foreign exchange values; the effect of customers making direct investments in mining operations; and freight rates. Consolidation of the coal industry continued and several examples were provided. The presentation also discussed other topics such as coking coal production issues; delayed mining permits and environmental issues; coking coal contract negotiations; and stock values of coking coal producers in the United States. It was concluded that consolidation will continue throughout the natural resource sector. tabs., figs

  12. Coal geopolitics

    International Nuclear Information System (INIS)

    Giraud, P.N.; Suissa, A.; Coiffard, J.; Cretin, D.

    1991-01-01

    This book divided into seven chapters, describes coal economic cycle. Chapter one: coals definition; the principle characteristics and properties (origin, calorific power, international classification...) Chapter two: the international coal cycle: coal mining, exploration, coal reserves estimation, coal handling coal industry and environmental impacts. Chapter three: the world coal reserves. Chapter four: the consumptions, productions and trade. Chapter five: the international coal market (exporting mining companies; importing companies; distributors and spot market operators) chapter six: the international coal trade chapter seven: the coal price formation. 234 refs.; 94 figs. and tabs [fr

  13. Financial Incentives to Restructure Coal Mining Industry. Comparative Case Study Romania and State of Michigan, U.S.

    Directory of Open Access Journals (Sweden)

    Roger HAMLIN

    2006-10-01

    Full Text Available Former coal mining sites have always raised environmental and economic challenges for the areas where they were located, especially for those communities that were highly dependent on the coal mining industry. The present paper will explore the factors leading to the decline of coal mining industry in Romania and State of Michigan, U.S., the social, economic and environmental impact that occurred after closing coal extractions and the approaches that the two states took to reconstruct the economy of the former mining areas. The paper attempts to make recommendations of financial incentives that can be used to foster the economic redevelopment of former coal mining sites in Romania.

  14. A NEW CHALLENGE FOR THE ROMANIAN COAL INDUSTRY: ELIMINATION OF THE STATE AID

    Directory of Open Access Journals (Sweden)

    Gruian Claudiu-Marian

    2010-12-01

    Full Text Available According to the European Commission decision N 239/2007 the Romanian coal industry will receive state aid by the end of 2010. After this period public companies in this sector will finance the costs of current production and investment entirely by their revenue. This article presents a short literature review regarding the subsidization of coal industry, shows the evolution of the mining industry in Romania so far, and identifies opportunities for continuing coal production after December 31, 2010 without state aid. The paper concludes that the abolition of subsides in is a positive measure but it must be taken gradually and responsibly, in order to ameliorate the negative effects on social end natural environment.

  15. Training of Engineering Personnel for the Innovative Coal Industry: Problems and Ways of Solution

    Science.gov (United States)

    Zaruba, Natalya; Fraltsova, Tamara; Snegireva, Tatyana

    2017-11-01

    The article is written based on some results of the long-term scientific research of the problem related to the urgent need to find the ways of training personnel for the innovative coal industry in the higher education system. This is due to the fundamental changes in the Russian social and economic conditions: the change in the social system and the owner of the coal industry, the emergence of new technologies in the field of coal mining and processing, and in the management of these processes. At the same time, the system of training specialists for the coal industry in the higher education institutions has largely remained unchanged: technologies and principles of training, scientific approaches and concepts take little account of the changed situation, traditional views of specialists work-ing in the university continue to dominate innovative ideas. Many innovations, especially related to technology and the principles of education, struggle to make their way into the higher education system. The article substantiates the urgency of the problem of training personnel for the innovative coal industry in the higher education system, as well as the importance of scientific analysis of the problem in order to find the ways to solve it.

  16. ECONOMIC AND THEORETICAL ASPECTS OF PLANNING EFFECTIVE ACTIVITY OF ENTERPRISES IN THE COAL INDUSTRIES

    Directory of Open Access Journals (Sweden)

    Zh. K. Galiev

    2018-03-01

    Full Text Available Relevance and purpose of the study. Under modern conditions, the share of loss-making enterprises of the coal industry is still high. This brings the solution of the problem of improving the efficiency of their activities up to date. It also determines the purpose of this research. Research methods: scientific generalization, system and factor analysis, and statistical modeling are used in the present work. Results. The article discusses the economic and theoretical aspects of planning the effective activities in the coal industry. The paper analyzes the elasticity of the unit cost price in terms of its labor productivity. It also deals with the elasticity of the volume of output in terms of labor productivity. This indicates that the existing coal mining technologies have, to some extent, exhausted their advantages in the coal industry. They require a change on the achieved level of the capital-labor ratio. It is recommended to strive to ensure advanced ratio of growth of labor productivity of workers compared to the growth rate of unit costs. This should be done at the introduction of a new technology at the enterprises of the coal industry. The advanced ratio of growth in output compared to the growth rate of labor productivity of workers should also be guaranteed. The early growth rate of revenue from sales compared to the growth rate in total costs of production should be provided. The advanced ratio of profit growth compared to the growth rate of revenue from sales has to be provided as well. It is proven that for coal industry enterprises the type of competitive advantages called “the lowest costs” can be the only acceptable one in comparison with other types. We have considered the requirements to the new developed technologies for coal mining. They are as follows: the value of marginal profit in the planned period should be more than the fixed costs of the enterprise; the value of marginal profit in the planned period should be more

  17. Restructuring and privatising the coal industries in Central and Eastern Europe and the CIS

    International Nuclear Information System (INIS)

    Brendow, K.

    1999-01-01

    This paper reviews coal industry reforms in central and Eastern Europe (CEE), including the former GDR and Estonia (oil shale), and the Commonwealth of Independent States (CIS). It describes achievements and failures during the last ten years on the road to an efficient, viable and environmentally acceptable coal industry playing the various roles assigned to it by governments as part of their energy policies. Obeying to conflicting objectives, coal-restructuring policies can best be described as stop-go policies. As a result, between 1990 and 1998, production declined by 41%, the number of pits by 26% and the number of employees by 45%. Productivity rose by only 8% in the region as a whole. At present, 80 to 90% of coal production is actually or virtually profitable under local or national circumstances. Turning virtual into actual profitability depends as much on continued reforms (unbundling of profitable from unprofitable mines, customerization of mines, equity privatisation) as on a fresh assessment, by investors, of two major opportunities: mine-utility partnerships and untapped productivity gains. These opportunities are growingly recognised by the business community: by 1998, 20% of coal production in the region are owned by equity investors, domestic and foreign. With, these opportunities in mind and assuming economic recovery, WEC, IIASA, IEA, DOE* (*World Energy Council, International Institute for Applied Systems Analysis, International Energy Agency, US Department of Energy) and national governments project a medium-term (2010,2020) increase of coal production against 1998 of about 20%, mostly in the CIS. (author)

  18. Principles of assessment and management approaches to innovation potential of coal industry enterprises

    Directory of Open Access Journals (Sweden)

    А. В. Козлов

    2017-03-01

    Full Text Available This paper examines problems related to forming a complex of indicators to assess innovation potential of an industrial enterprise, on the example of coal industry enterprises, and an integral indicator of innovation potential, used for comparative analysis of the state of affairs in the industry. Analysis of different approaches to defining the term «innovation potential» for industrial enterprises has been carried out; resource-based, resultative, integrative and capacitive approaches have been highlighted, the latter one based on assessment of enterprise capacities. A conclusion has been made regarding advantages of integrative approach.Research has been made on the role of industry in the fuel and power sector of China and dynamics of industry and enterprise development in Shanxi province. Basing on suggested approach a system of assessment principles has been formulated, taking into account specific features of coal industry enterprises. Complex of indicators to assess innovation potential has been developed using expert evaluation method. An expertise procedure is proposed to assess competence of experts; results obtained from the expertise are presented. Proposed complex of indicators includes 23 parameters combined into three groups.Testing of proposed complex of indicators has been carried out on the example of coal industry in Shanxi province (China. Application of all stated principles has been proved in the process of indicator selection, assessment and formulation of recommendations for subsequent innovation potential management of coal industry enterprises. Proposed approach to forming a complex of indicators of innovation potential for industry enterprises permits to link together the logic of innovation potential definition, formation of the system of its principles, selection of the indicators complex for assessment and subsequent innovation potential management of the enterprise.

  19. Application of a Backfilling Method in Coal Mining to Realise an Ecologically Sensitive “Black Gold” Industry

    OpenAIRE

    Xiaowei Feng; Nong Zhang; Lianyuan Gong; Fei Xue; Xigui Zheng

    2015-01-01

    China, as the largest coal-producing and -consuming country in the world, is highly dependent on its coal industry, or “Black Gold” industry, for the national energy and economy. The consequent environmental crises, however, have persisted for decades, and the most serious effect is surface subsidence induced by underground mining. Underground coal excavation in China has ignored this problem for thousands of years, even though it causes conspicuous damage to the surface ecosystem and constru...

  20. Abandoned coal mining sites: using ecotoxicological tests to support an industrial organic sludge amendment.

    Science.gov (United States)

    Chiochetta, Claudete G; Radetski, Marilice R; Corrêa, Albertina X R; Tischer, Vinícius; Tiepo, Erasmo N; Radetski, Claudemir M

    2013-11-01

    The different stages involved in coal mining-related activities result in a degraded landscape and sites associated with large amounts of dumped waste material. Remediation of these contaminated soils can be carried out by application of industrial organic sludge if the concerns regarding the potential negative environmental impacts of this experimental practice are properly addressed. In this context, the objective of this study was to use ecotoxicological tests to determine the quantity of organic industrial sludge that is required as a soil amendment to restore soil production while avoiding environmental impact. Chemical analysis of the solids (industrial sludge and soil) and their leachates was carried out as well as a battery of ecotoxicity tests on enzymes (hydrolytic activity), bacteria, algae, daphnids, earthworms, and higher plants, according to standardized methodologies. Solid and leachate samples of coal-contaminated soil were more toxic than those of industrial sludge towards enzyme activity, bacteria, algae, daphnids, and earthworms. In the case of the higher plants (lettuce, corn, wild cabbage, and Surinam cherry) the industrial sludge was more toxic than the coal-contaminated soil, and a soil/sludge mixture (66:34% dry weight basis) had a stimulatory effect on the Surinam cherry biomass. The ecotoxicological assessment of the coal-contaminated soil remediation using sludge as an amendment is very important to determine application rates that could promote a stimulatory effect on agronomic species without negatively affecting the environment.

  1. Environmental benefits and drawbacks of composite fuels based on industrial wastes and different ranks of coal.

    Science.gov (United States)

    Nyashina, G S; Vershinina, K Yu; Dmitrienko, M A; Strizhak, P A

    2018-04-05

    A promising solution to many problems that thermal power industry is facing today would be switching from conventional coal dust combustion to coal-water slurries containing petrochemicals (CWSP). Here, we perform an experimental study of the most hazardous anthropogenic emissions (sulfur and nitrogen oxides) from the combustion of high-potential CWSP. We identify the main benefits and potential drawbacks of using CWSP in thermal power industry. A set of components and additives to CWSP are explored that significantly affect the environmental and energy performance of fuels. The anthropogenic emissions from the combustion of CWSP made of widespread coal and oil processing wastes are no higher than those from coal dust combustion. Using specialized additives to CWSP, we can change the concentrations of NO x and SO x several times. The most appealing additives to CWSP are sawdust, straw, charcoal, limestone, and glycerol. They provide better environmental, economic, and energy performance and improve the rheological properties of CWSP. Waste oils and oil sludge added to CWSP may impair the environmental performance but boost the cost and energy efficiency. Using coal-water slurries containing petrochemicals as a fuel at thermal power plants is an environmentally friendly as well as cost- and energy-efficient way to recover industrial wastes. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Black economic empowerment in the South African coal industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    South Africa has experienced great change and progress in the ten years since the end of apartheid and the inauguration of its first democratic government. Back in 1994, many were concerned about whether such a young and fragile democracy could survive. The new government needed to unify the country, while bringing about the significant change necessary to address the massive racial inequality at the heart of the apartheid system. The article explains actions and initiatives taken under the Black Economic Empowerment (BEE) programme, one of which is the establishment of Eyesizwe Coal. 2 figs., 1 photo.

  3. The changing structure of the US coal industry: An update, July 1993

    International Nuclear Information System (INIS)

    1993-01-01

    Section 205(a)(2) of the Department of Energy Organization Act of 1977 requires the Administrator of the Energy Information Administration (EIA) to carry out a central, comprehensive, and unified energy data and information program that will collect, evaluate, assemble, analyze, and disseminate data and information relevant to energy resources, reserves, production, demand, technology, and related economic and statistical information. The purpose of this report is to provide a comprehensive overview of changes in the structure of the US coal industry between 1976 and 1991. The structural elements examined include the number of mines, average mine size, the size distribution of mines, and the size distribution of coal firms. The report measures changes in the market shares of the largest coal producers at the national level and in various regions. The Central Appalachian low-sulfur coal market is given special attention, and the market for coal reserves is examined. A history of mergers in the coal industry is presented, and changes in the proportions of US coal output that are produced by various types of companies, including foreign-controlled firms, are described. Finally, the impact of post-1991 mergers on the structure of the industry is estimated. The legislation that created the EIA vested the organization with an element of statutory independence. The EIA does not take positions on policy questions. The EIA's responsibility is to provide timely, high-quality information and to perform objective, credible analyses in support of deliberations by both public and private decisionmakers. Accordingly, this report does not purport to represent the policy positions of the US Department of Energy or the Administration

  4. Future industrial and municipal waste management in poland the polish challenge

    International Nuclear Information System (INIS)

    Nowakowskl, J.; Sorum, L.; Hustad, J.E.

    1996-01-01

    Poland now face a very interesting discussion on modern waste treatment methods, although the waste problems are very oil. This paper presents a total waste management view from the formation process to recycling, utilisation and land filling. The average municipal solid waste (MSW) annual per capita generation in poland is 250 kg per person, which is half of the waste amount generated in norway and one third of the amount in Usa. The present low per capita generation, large variations in MSW properties and an expected growth in the standard of living make the decisions regarding future polish waste management systems very important. Waste management must be handled carefully to prevent a rapid growth of waste generation - this is the p olish challenge , both mow and for the future. Three different possibilities for future waste management systems for rural areas, small cities and larger cities are discussed in the paper. 4 figs., 1 tab

  5. The Impact of Opportunity Management on the Relationship Business Model (A Study in the Polish Housing Industry

    Directory of Open Access Journals (Sweden)

    Bartosz Deszczyński

    2016-12-01

    Full Text Available This paper illustrates the level of proficiency of multistage and multi-channel dialogue between the customers and the companies on the example of opportunity management conducted primarily in the Polish housing industry. Opportunity management (also called lead management is an initial customer relationship management (CRM process that connects the sales persons and the customers ready to make a purchase. Unlike the other processes its close link to transaction makes it ideal to achieve quick-wins making CRM business case cogent. However the research shows that the companies have severe problems in sustaining coherent dialogue with their prospective buyers what possibly reflects their relationship management immaturity. The aim of this article is to explain the nature of this phenomenon and its impact on the relationship business model.

  6. From Mining to Post-Mining: The Sustainable Development Strategy of the German Hard Coal Mining Industry

    Science.gov (United States)

    Kretschmann, J.; Efremenkov, A. B.; Khoreshok, A. A.

    2017-01-01

    By the end of the 1950s, the German coal mining industry produced 150 million tons of hard coal per year in 170 collieries with 600,000 employees. At that time, 70% of the primary energy demand of the Federal Republic of Germany was covered by domestic coal. Since the advance of oil, later of natural gas, in the world energy market and with the growth of world coal trade, domestic coal stood under a long-term restructuring pressure. This decision required a new strategy for the coal mining industry. Now German coal mining will be strictly finalized and will be prepared for the post-mining era. Within a sustainability strategy the long-term impacts of mining activities before and after the mine closures concerning the environmental, economic and social dimensions will be analyzed systematically and forward-looking.

  7. Modeling for comparison of leukemia incidence risk between nuclear and coal power industries

    International Nuclear Information System (INIS)

    Prybutok, V.R.; Gold, L.M.

    1987-01-01

    The leukemia incidence risk for a single coal plant, a single nuclear plant, and a single nuclear accident is used to compute the total industry leukemia incidence risk. In the absence of a nuclear power plant accident, the leukemia incidence risk is normally lower for a nuclear industry than for a coal industry of equivalent size. The nuclear industry risk with accidents was compared to the coal industry risk for six proposed dose response curves. Simplifying assumptions about the negligible effect of the cell-killing term and the linear nature of the linear quadratic curve allowed derivation of risk models for the assumption of both linear and quadratic dose response. These derived models, representing leukemia incidence risk bounds, are used to estimate the total industry risk comparison. Evaluation of an accident's impact on the leukemia incidence risk comparison is done with the risk bounds and compared to the risk evaluations calculated during all six dose response curves. The overlapping plot of the number of nuclear accidents required for equivalent industry environment risks versus the accident fraction allows the conservative function to be defined

  8. Historical exposure levels of inhalable dust in the Polish rubber industry compared to levels in Western Europe

    Science.gov (United States)

    de Vocht, F.; Kromhout, H.; Sobala, W.; Peplonska, B.

    2009-02-01

    Although studies have been carried out to assess inhalable dust exposure levels in the rubber manufacturing industry, the levels of exposure in factories in Eastern Europe are less well documented. Routine stationary sampling for compliance testing of inhalable aerosols has however been conducted in a large factory producing tires and tubes in Poland between 1981 and 1996 (N=6,152). This study was conducted to assess historical inhalable aerosol levels in different departments in this rubber plant and to compare the results with estimates based on European data from the UK, Sweden, the Netherlands and Germany, and also Poland (EXASRUB project). Geometric mean (GM) concentrations in the factory ranged from 2.41 mg/m3 to 5.82 mg/m3 and were to a large extent associated to the actual production capacity of the plant and flow of the production process. Whereas 3-4 fold differences between departments existed prior to about 1985, stronger reduction of exposure in the raw materials and finishing departments (-12%/year) compared to other departments (range -5%/yr to -3%/yr), resulted in comparable levels in the 1990s. However, in the pre-treating departments, average concentrations were still about a factor 2-3 higher than in other departments, which could presumably be attributed to the use of anti-tacking agents. GM concentrations have been modelled using (1) stationary measurements collected in the Polish factory only, or (2) all European data collected in the EXASRUB project. Comparison of the estimates showed that these were fairly similar for both datasets. This analysis showed that the levels of inhalable aerosols in the Polish rubber industry have been at least a factor three to four higher than in Western European countries in the 1980s and 1990s, depending on the department, but that these differences were getting smaller in the 1990s. Furthermore, the estimates based on all European data from EXASRUB provides valid estimates compared to factory-specific data.

  9. Managerial Accounting Principles and Cost Calculation Used by Economic Entities in the Coal Mining Industry

    OpenAIRE

    Boca (Rakos) Ileana – Sorina; Vatasoiu Cristian Ionel

    2011-01-01

    Considering the specialized work in managerial accounting, this paper aims to show which cost calculation principles are actually applied in the coal mining industry today. The methodology used in this scientific approach is of qualitative nature, using the following methods: direct observation and interview.

  10. Ways to control quality of electric equipment in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Shipilov, A.D.; Nabokov, E.P.

    1982-01-01

    A structure is proposed for organization in the coal industry of a permanent service for controlling quality of electrical engineering equipment. A form was developed for introduction of recommendations to improve quality. Methods are suggested for evaluating the quality level as applied to specific tasks of controlling quality of the electrical equipment used in mining.

  11. Analysis of the holistic impact of the Hydrogen Economy on the coal industry

    Science.gov (United States)

    Lusk, Shannon Perry

    As gas prices soar and energy demand continues to grow amidst increasingly stringent environmental regulations and an assortment of global pressures, implementing alternative energy sources while considering their linked economic, environmental and societal impacts becomes a more pressing matter. The Hydrogen Economy has been proposed as an answer to meeting the increasing energy demand for electric power generation and transportation in an environmentally benign way. Based on current hydrogen technology development, the most practical feedstock to fuel the Hydrogen Economy may prove to be coal via hydrogen production at FutureGen plants. The planned growth of the currently conceived Hydrogen Economy will cause dramatic impacts, some good and some bad, on the economy, the environment, and society, which are interlinked. The goal of this research is to provide tools to inform public policy makers in sorting out policy options related to coal and the Hydrogen Economy. This study examines the impact of a transition to a Hydrogen Economy on the coal industry by creating FutureGen penetration models, forecasting coal MFA's which clearly provide the impact on coal production and associated environmental impacts, and finally formulating a goal programming model that seeks the maximum benefit to society while analyzing the trade-offs between environmental, social, and economical concerns related to coal and the Hydrogen Economy.

  12. Coal

    International Nuclear Information System (INIS)

    Muir, D.A.

    1991-01-01

    It is estimated that World coal trade remained strong during the second quarter of 1991, with contributing factors including unseasonally large shipments to Japan for power generation, sustained Japanese steel production at around 112 Mt and some buildup in stocks in that country. Purchases by North Asian and European consumers also remained high. At the same time Soviet output and exports declined because of strikes and political unrest. In addition, exportable supplies in Poland fell. As a result the demand for Indonesian coal increased, and Australia exported larger than previously expected quantities of coal. ills

  13. R&D status and the performance of domestic firms in China's coal mining industry

    International Nuclear Information System (INIS)

    Sun, Sizhong; Anwar, Sajid

    2015-01-01

    Coal use accounts for a very large proportion of electricity production in China. Using a recently developed coarsened exact matching (CEM) technique, this paper examines the impact of research and development (R&D) activities on the performance of firms in China's coal mining industry. Our empirical results reveal that firms in China's coal industry that conduct R&D are more productive and their sales are higher. However, as far as the firm profitability and market shares are concerned, whether or not a firm in China's coal industry conducts R&D makes no difference. We find that foreign direct investment in China's coal mining industry leads to a significant decrease in the market share of domestic firms and its impact on productivity, sales and profitability of domestic firms is insignificant. The empirical results presented in this paper suggest that policies that encourage domestic firms in China's coal mining industries to conduct R&D can increase domestic production thereby reducing reliance on imports. Furthermore, productivity gains arising from R&D activities can also help Chinese mining firms to improve their competitive position in the international market. However, there is a need for restricting foreign direct investment in China's coal mining industry. - Highlights: • R&D status affects firm performance in China's coal mining industry. • Coal mining firms that conduct R&D are, on average, 0.2717% more productive. • Coal mining firms that conduct R&D experience an increase in sales. • Increase in foreign investment decreases the market share of coal mining firms

  14. Thermophysical properties of composite fuel based on T grade coal (Alardinskoe deposit) and timber industry wastes

    Science.gov (United States)

    Yankovsky, S. A.; Tolokolnikov, A. A.; Gubin, V. E.; Slyusarskiy, K. V.; Zenkov, A. V.

    2017-09-01

    Results of experimental studies of composite fuel thermal decomposition processes based on T grade coal (Alardinskoe deposit) and timber industry wastes (fine wood) are presented. C, H, N, S weight percentage of each component of composite fuel was determined experimentally. It has been established that with an increase in wood concentration up to 50% in composite fuel, its energy characteristics decrease by less than 3.6%, while the yield of fly ash is 39.7%. An effective composite fuel composition has been defined as 50%/50%. Results of performed experimental studies suggest that it is possible to use composite fuels based on coal and wood at thermal power plants.

  15. Improving Occupational and Industrial Safety Management System at Coal Mining Enterprises

    Science.gov (United States)

    Smagina, Svetlana; Kadnikova, Oksana; Demidenko, Ksenia; Chistyakova, Galina; Rolgayzer, Anastasia

    2017-11-01

    The article highlights the problem of mine workers occupational safety. The foreign and domestic experience of the field is analyzed. Some areas, activities and methods that meet modern requirements for ensuring occupational safety and production development, which are aimed at improving the quality of occupational safety management system, are described. The possibilities of their use in industrial safety of Kuzbass coal mining enterprises are considered. The proposed methods were implemented by JSC "Shakhta Yuzhnaya", "Kiselevsky Razrez" Ltd., the coal mining enterprises of the Kemerovo region.

  16. Influence of Coal Industry Enterprises on Biodiversity (on the Example of Formicidae)

    Science.gov (United States)

    Blinova, Svetlana; Dobrydina, Tatiana

    2017-11-01

    The fauna, the population density and the types of ants' nests on the territory affected by the coal industry have been studied. It has been found that the level of environmental contamination influences all the indicators: the minimum indices of density, 1-2 species of ants and only underground nests near the pollution sources. On the contrary, in the areas with a weak influence of coal enterprises, 9 species with a maximum density of up to 15.2 nests / m2 have been observed with predominance of nests in the form of earthen mounds. Lasius niger are the most resistant to pollution, while the Myrmica do not stand such an impact.

  17. Quartz exposure levels in the underground and surface coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Ainsworth, S.M.; Gero, A.J.; Parobeck, P.S; Tomb, T.F. [US Mine Safety and Health Administration, Pittsburgh, PA (United States)

    1995-10-01

    Occupational quartz exposure data gathered from the Mine Safety and Health Adminsitration`s respirable dust enforcement program and a program to monitor quartz exposure in several mining occupations were compiled and analyzed to assess the status of quartz exposures in the coal mining industry. The analysis showed that, in underground mines, a substantial number of samples contained greater than 5% quartz. Occupations that showed a high frequency of excessive quartz exposure included the roof bolter, continuous miner operator, and continuous miner operator helper. In surface coal mines the highwall drill operator and helper, bulldozer operator, scraper operator, and truck driver were frequently exposed to high quartz concentrations.

  18. Capitalist collective action: competition, cooperation and conflict in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    John R. Bowman [City University of New York, New York, NY (USA). Queens College

    2006-11-15

    This volume presents a theory of capitalist collective action and a case study of the pre-World War II American coal industry to which the theory is applied. The author examines the irony of capitalist firms that do not want to compete with each other, but often cannot avoid doing so. He then explains under what conditions businesses would be able to organize their competition and identifies the economic and political factors that facilitate or inhibit this organization. The case study not only illustrates the theory, but demonstrates how the competitive relations of capitalist firms are critically important determinants of their political behavior. The author argues that the traditional Marxist concern with conflict between workers and capitalists should be supplemented with a concern for the competitive conflicts among capitalists. Contents are: 1: 1. Economic competition and market organization: the logic of capitalist collective action; 2. Forms of capitalist collective action; Part II: 3. Price and wage games in the bituminous coal industry; 4. Workers organize capitalists: collective bargaining and market organization, 1880-1914; 5. The coal industry on the defensive, 1916-1922; 6. Labor-capital conflict and the disorganization of the coal market, 1921-1928; 7. From free competition to state intervention; Part III: 8. Capitalists, workers, and the state; Bibliography; Indexes. This text was originally published in 1989 in hardback (ISBN 0-521-36265-2).

  19. Word-Of-Mouth in Social Media. The Case of Polish Tourist Industry

    OpenAIRE

    Deszczyński Bartosz

    2017-01-01

    The core objective of this paper is to determine the level of online dialogue in social media between the tourist industry leaders and their customers. This study applies sequential explanatory industry-representative comparison with statistical and qualitative analysis of online word-of-mouth communication. Its main finding is that even if online marketing is a hot topic, online channels seem to be neglected by the companies failing to provide real-time dialogue services. This results in the...

  20. Facilitating Growth of Two Industrial Clusters in the Polish Podlaskie Region

    DEFF Research Database (Denmark)

    Decker, Arnim; Rollnik-Sadowska, Ewa

    2014-01-01

    The objective of this contribution is to discuss clustering policy in Podlaskie province (Poland) from the angle of knowledge creation. The region is both challenged by being located in a peripheral region as well as being part of a transition economy. Two industrial clusters were chosen for this......The objective of this contribution is to discuss clustering policy in Podlaskie province (Poland) from the angle of knowledge creation. The region is both challenged by being located in a peripheral region as well as being part of a transition economy. Two industrial clusters were chosen...

  1. Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

    Directory of Open Access Journals (Sweden)

    Bing Han

    Full Text Available This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

  2. Viral Management as a New Type of Enterprise Management in Coal Industry

    Science.gov (United States)

    Garafonova, Olga; Grigashkina, Svetlana; Zhosan, Anna

    2017-11-01

    The article considers the evolution of the concept of "management". The Internet analysis of the concept of "viral management" was conducted, the results of which testify to the positive trend, the growing interest in scientific circles, the relevance of the chosen direction for further research and the increasing popularity of the viral management among business leaders. The indices of coal and brown coal extraction in Ukraine and Russia for 2010-2016 are analyzed. Among the problems that exist in the coal industry are the following: mine assets have a high degree of deterioration; the equipment is rather obsolete and does not correspond to the world level; among the existing face equipment, the specific weight of longwall mining equipment, road headers, loading machines, and belt conveyors of the new generation is only several percent. Five steps of introduction of the virus management at the enterprise are identified: opening, development, participation, diffusion, sustainability. The principles of introduction of the viral management in the enterprises of the coal industry are offered. It is established that the main idea of the viral management is to "infect" the organization and, mainly, employees with one or another "virus" in the form of a common idea or goal. It is indicated that the viral management assumes a certain automaticity of changes, internal "obsession" with this or other innovation, involvement of an informal personal factor.

  3. Viral Management as a New Type of Enterprise Management in Coal Industry

    Directory of Open Access Journals (Sweden)

    Garafonova Olga

    2017-01-01

    Full Text Available The article considers the evolution of the concept of “management”. The Internet analysis of the concept of “viral management” was conducted, the results of which testify to the positive trend, the growing interest in scientific circles, the relevance of the chosen direction for further research and the increasing popularity of the viral management among business leaders. The indices of coal and brown coal extraction in Ukraine and Russia for 2010-2016 are analyzed. Among the problems that exist in the coal industry are the following: mine assets have a high degree of deterioration; the equipment is rather obsolete and does not correspond to the world level; among the existing face equipment, the specific weight of longwall mining equipment, road headers, loading machines, and belt conveyors of the new generation is only several percent. Five steps of introduction of the virus management at the enterprise are identified: opening, development, participation, diffusion, sustainability. The principles of introduction of the viral management in the enterprises of the coal industry are offered. It is established that the main idea of the viral management is to “infect” the organization and, mainly, employees with one or another “virus” in the form of a common idea or goal. It is indicated that the viral management assumes a certain automaticity of changes, internal “obsession” with this or other innovation, involvement of an informal personal factor.

  4. Restructuring of the coal industry and thermal power sector in the Commonwealth of Independent States

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-07-30

    The paper summarizes the most recent developments in the transformation of the coal and thermal power sector in Kazakhstan, Russian Federation and Ukraine to market economy conditions. It also provides statistical data concerning the dynamics of the major indicators of restructuring, such as the allocation of state subsidies, productivity growth, employment and investment. Over the last three years, the restructuring of the coal and thermal power sectors has progressed differently in the above three countries. Both sectors and especially the coal industry sector have been forced to restructure with extreme rapidity under unstable conditions, such as economic decline, absence of stable economic and fiscal laws, hyperinflation, loss of purchasing power, collapse of payment system. The transformation has been management restructuring rather than technical or reinvestment. The programmes of restructuring were mor ambitious than their realistic implementation as the lack of financial resources had, in many cases, delayed or even postponed the deadlines and objectives. The first stage has been completed in the Russian Federation, but has not yet started in Ukraine. In Kazakhstan, the coal industry has been fully privatized, mainly by foreign companies, power generation is now following along the same lines. Both sectors adapt their structure to new market requirements.

  5. [Emission characteristics of PM10 from coal-fired industrial boiler].

    Science.gov (United States)

    Li, Chao; Li, Xing-Hua; Duan, Lei; Zhao, Meng; Duan, Jing-Chun; Hao, Ji-Ming

    2009-03-15

    Through ELPI (electrical low-pressure impactor) based dilution sampling system, the emission characteristics of PM10 and PM2.5 was studied experimentally at the inlet and outlet of dust catchers at eight different coal-fired industrial boilers. Results showed that a peak existed at around 0.12-0.20 microm of particle size for both number size distribution and mass size distribution of PM10 emitted from most of the boilers. Chemical composition analysis indicated that PM2.5 was largely composed of organic carbon, elementary carbon, and sulfate, with mass fraction of 3.7%-21.4%, 4.2%-24.6%, and 1.5%-55.2% respectively. Emission factors of PM10 and PM2.5 measured were 0.13-0.65 kg x t(-1) and 0.08-0.49 kg x t(-1) respectively for grate boiler using raw coal, and 0.24 kg x t(-1) and 0.22 kg x t(-1) for chain-grate boiler using briquette. In comparison, the PM2.5 emission factor of fluidized bed boiler is 1.14 kg x t(-1), much her than that of grate boiler. Due to high coal consumption and low efficiency of dust separator, coal-fired industrial boiler may become the most important source of PM10, and should be preferentially controlled in China.

  6. Analysis of industrial markets for low and medium Btu coal gasification. [Forecasting

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-30

    Low- and medium-Btu gases (LBG and MBG) can be produced from coal with a variety of 13 existing and 25 emerging processes. Historical experience and previous studies indicate a large potential market for LBG and MBG coal gasification in the manufacturing industries for fuel and feedstocks. However, present use in the US is limited, and industry has not been making substantial moves to invest in the technology. Near-term (1979-1985) market activity for LBG and MBG is highly uncertain and is complicated by a myriad of pressures on industry for energy-related investments. To assist in planning its program to accelerate the commercialization of LBG and MBG, the Department of Energy (DOE) contracted with Booz, Allen and Hamilton to characterize and forecast the 1985 industrial market for LBG and MBG coal gasification. The study draws five major conclusions: (1) There is a large technically feasible market potential in industry for commercially available equipment - exceeding 3 quadrillion Btu per year. (2) Early adopters will be principally steel, chemical, and brick companies in described areas. (3) With no additional Federal initiatives, industry commitments to LBG and MBG will increase only moderately. (4) The major barriers to further market penetration are lack of economic advantage, absence of significant operating experience in the US, uncertainty on government environmental policy, and limited credible engineering data for retrofitting industrial plants. (5) Within the context of generally accepted energy supply and price forecasts, selected government action can be a principal factor in accelerating market penetration. Each major conclusion is discussed briefly and key implications for DOE planning are identified.

  7. Word-Of-Mouth in Social Media. The Case of Polish Tourist Industry

    Directory of Open Access Journals (Sweden)

    Deszczyński Bartosz

    2017-12-01

    Full Text Available The core objective of this paper is to determine the level of online dialogue in social media between the tourist industry leaders and their customers. This study applies sequential explanatory industry-representative comparison with statistical and qualitative analysis of online word-of-mouth communication. Its main finding is that even if online marketing is a hot topic, online channels seem to be neglected by the companies failing to provide real-time dialogue services. This results in the loss of customer attention and engagement and can be linked with overall corporate relationship management immaturity. In addition, the article offers vital insight into customer value creation chain of hotel and tour operators.

  8. Mineralogical and geochemical composition of particulate matter (PM10) in coal and non-coal industrial cities of Henan Province, North China

    Science.gov (United States)

    Song, Xiaoyan; Shao, Longyi; Zheng, Qiming; Yang, Shushen

    2014-06-01

    A total of 19 24-h PM10 samples, the 11 for a typical coal industrial city and 8 for a non-coal industrial city, were collected by a TSP-PM10 sampler during a serious and continuous haze event in Henan Province, North China. An X-ray diffractometer (XRD) was used to determine the mineralogy and a scanning electron microscope equipped with an energy-dispersive X-ray spectrometer (SEM-EDS) was used to determine the morphology and chemical composition of the PM10 samples. The crystalline phases that were identified by XRD mainly include sulfate (dominated by koktaite, boussingaultite, gypsum, etc.) and silicate (quartz and kaolinite) as well as small amount of chloride (sal-ammoniac). Silicate particles mainly originate from crust as well as waste dumps for coal industrial cities, and usually have an irregular shape, while sulfate particles occur as individual sheets or needles, and have an anthropogenic origin, which are the products of chemical reaction of preexisting carbonate with SO2 emitted by coal combustion. Nitrogen, S and Cl occurring in particulate matter are considered to have an anthropogenic origin due to their high enrichment factors, and their abundance in particulate matter is associated with coal industrial activities. Nitrogen mainly occurs as NH4+ in sulfate, as well as in small amount of organic matter. Sulfur mainly occurs as SO42 - in sulfate. Chlorine mainly occurs in chloride.

  9. Coal mining in the power industry of the Federal Republic of Germany in 1993

    International Nuclear Information System (INIS)

    1994-11-01

    After an introductory text divided into the sections energy and coal market, Coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. (orig.) [de

  10. The South Manchurian Railway Company and the Mining Industry: The Case of the Fushun Coal Mine

    Directory of Open Access Journals (Sweden)

    Tsu-yu Chen

    2015-09-01

    Full Text Available Following the Japanese victory over Czarist Russia in the Russo-Japanese War and the signing of the Treaty of Portsmouth in 1905, the southernmost section of the southern branch of the China Far East Railway (Changchun–Port Arthur was transferred to Japanese control. A new, semi-privately held company, the South Manchuria Railway Company (SMR, Mantetsu, was established with 85.6 percent capitalization by the Japanese government and foreign bonds to operate the railroad and to develop settlements (including highways, public health facilities, educational institutions, and industries (coal mines, harbor facilities, electrical power plants, shale oil plants, chemical plants, and restaurants along its route. SMR nonetheless emphasized railway and mining investment. The centerpiece of its mining interests was the Fushun Coal Mine. Starting in 1917, SMR began to prosper, with most profits coming from its coal mines, and it soon spun off subsidiary companies. In this sense, although the factors that influenced development of the Fushun Coal Mine in each period were different, this development still shows continuity of the business management.

  11. Coal utilization in industrial boilers in China - a prospect for mitigating CO2 emissions

    International Nuclear Information System (INIS)

    Fang, J.; Zeng, T.; Yang, L.I.S.; Oye, K.A.; Sarofim, A.F.; Beer, J.M.

    1999-01-01

    It is estimated from GEF statistical data for 1991 that more than 500,000 industrial boilers (mostly stoker-fired) in China consume over 400 million tons of coal per year. Each year, because of low boiler efficiency, 75 million tons of coal is wasted and 130 million tons of excess CO 2 are emitted. An analysis of 250 boiler thermal-balance test certificates and 6 field visits in three provinces have shown that: (1) boilers with efficiencies of less than 70% account for 75% of the total boiler-population; (2) the main causes of the low efficiencies are high excess air and unburned carbon in the slag and fly ash. The effect of unburned carbon on CO 2 emission is a balance of positive and negative contributions: while the unburned carbon does not produce CO 2 emissions, its replacement carbon, burned at a low efficiency, contributes to a net increase in CO 2 emissions. It seems from the analysis that the average boiler efficiency can be raised to 73% by relatively simple means, such as the size grading of the coal, improved boiler operating practice and some inexpensive equipment modifications. This could then result in savings each year of 34 million tons of coal and a reduction in CO 2 emissions of 63 million tons at an estimated cost of $10 per ton of CO 2 . (Copyright (c) 1999 Elsevier Science B.V., Amsterdam. All rights reserved.)

  12. Current and advanced NO/sub x/-control technology for coal-fired industrial boilers

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-01

    A NOx-control-technology assessment study of coal-fired industrial boilers was conducted to examine the effectiveness of combustion-modification methods, including low excess air, staged combustion, and burner modifications. Boiler types considered included overfed and underfed stokers, spreader stokers, pulverized-coal and coal-fired cyclone units. Significant variations in NOx emissions occur with boiler type, firing method, and coal type; a relative comparison of emission-control performance, cost, and operational considerations is presented for each method. Baseline (as-found) emissions from grate-fired stokers were shown to be in the range of 200 to 300 ppM. Similarly, as-found emissions from suspension-fired units were quite low (350 to 600 ppM) as compared to comparably designed utility-sized units. Low excess air was shown to be the most effective method on existing units, reducing emissions by approximately 10%. Evaluation of staged combustion and burner modification, however, were limited due to current boiler designs. Major hardware modification/design and implementation are necessary before the potential of these techniques can be fully evaluated. The study emphasized the numerous operational factors that are of major importance to the user in selecting and implementing a combustion-modification program, including energy considerations, incremental capital and operating costs, corrosion, secondary pollutants, and retrofit potential.

  13. Corporate social responsibility in coal industry (practices of russian and european companies

    Directory of Open Access Journals (Sweden)

    Т. В. Пономаренко

    2016-12-01

    Full Text Available Corporate social responsibility (CSR is built on interaction between companies and the society which is especially important for major companies that exploit natural resources and play the role of city-forming socially significant entities. Various interpretations of the notion of social responsibility define the varying levels of influence companies have on the society, different levels of contribution of companies in the said process and the degree and level of implementation of CSR. The relations between social responsibility and economic results and the effects of implementing CSR policies are often not obvious.This study offers an assessment of present-day state of corporate social responsibility policies in coal companies of Russia and Poland and formulates proposals on implementing social responsibility projects with consideration of state-of-the-art CSR concepts.The results of the study are as follows: the achieved level of social responsibility in coal companies of Russia and Poland has been assessed; it is proven that most companies in the coal industry are at the level of fragmentary application of CSR concepts; an analysis has been carried out of tools available in the area of social responsibility of coal companies.

  14. Utilizing Philippine Calatrava coal-diesel oil mixture (CDOM) as alternative fuel for industrial steam generator

    Energy Technology Data Exchange (ETDEWEB)

    Archie B. Maglaya [De La Salle University, Manila (Philippines). Department of Mechanical Engineering

    2005-01-01

    The fast depletion of fuel oil and the continuous increase in the demand for power is a global issue. In the Philippines, the demand for diesel oil is expected to increase significantly in a 20-year period as projected by the Department of Energy. In line with the Philippine Government's thrust to lessen the dependence on imported energy, the agenda for the search for alternative fuel is highly prioritized. Thus, this paper presents the results of the study on performance analysis and efficiency test of a diesel oil fired industrial steam generator using Philippine Calatrava coal-diesel oil mixture (CDOM) as alternative fuel. A computer program was developed in HyperText Markup Language (HTML{copyright}) and JavaScript{copyright} to aid the computation of the adiabatic flame temperature from the governing system of equations based on the heat interaction between CDOM fuel, combustion air and products of combustion to determine the most desirable alternative fuel. Actual experimentation for the determination of CDOM fuel properties was also conducted to verify the alternative fuel selected through theoretical calculations. Results showed that the CDOM fuel with a particle size passing 75 {mu}m (-200 mesh) sieve having a proportion of 5% pulverized coal-95% diesel oil and 10% pulverized coal-90% diesel oil could be handled throughout the test with no degradation of the industrial steam generator. The steam generator efficiency using diesel oil is close to the steam generator efficiency using both CDOM fuels. 20 refs., 5 figs., 4 tabs.

  15. Industrial Internet of Things: (IIoT) applications in underground coal mines.

    Science.gov (United States)

    Zhou, C; Damiano, N; Whisner, B; Reyes, M

    2017-12-01

    The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure.

  16. Conceptual design study of a coal gasification combined-cycle powerplant for industrial cogeneration

    Science.gov (United States)

    Bloomfield, H. S.; Nelson, S. G.; Straight, H. F.; Subramaniam, T. K.; Winklepleck, R. G.

    1981-01-01

    A conceptual design study was conducted to assess technical feasibility, environmental characteristics, and economics of coal gasification. The feasibility of a coal gasification combined cycle cogeneration powerplant was examined in response to energy needs and to national policy aimed at decreasing dependence on oil and natural gas. The powerplant provides the steam heating and baseload electrical requirements while serving as a prototype for industrial cogeneration and a modular building block for utility applications. The following topics are discussed: (1) screening of candidate gasification, sulfur removal and power conversion components; (2) definition of a reference system; (3) quantification of plant emissions and waste streams; (4) estimates of capital and operating costs; and (5) a procurement and construction schedule. It is concluded that the proposed powerplant is technically feasible and environmentally superior.

  17. South Africa, a new perspective: How the coal industry of RSA looks to an observer from the USA

    International Nuclear Information System (INIS)

    Arthur, S.P.

    1994-01-01

    A microcosm of what was, what is, and hopefully what will be, is embodied in South Africa's coal industry-the sixth largest in the world, the third largest in coal exports behind the United States and Australia, and the second largest in the world's steam coal trade behind Australia. Mining is the international, economic life blood of South Africa. In total, the country exports 60 minerals to 80 countries, providing on a raw basis for 43% of the nation's international trade, and as much as 60% when beneficiated products are included. The nation's coal fields lie in the northeastern section of the country, running south from the Botswana-Zimbabwe-Mozambique borders, principally in the Transvaal, Natal, and Orange Free State provinces. The coal seams run in thickness from 2.5 to 8 m, with an average overburden thickness of 80 m. The coal industry provides 83% of the country's commercial energy and 52% of all the electric power consumed on the entire continent. Seen from the air, the veld around Johannesburg is dotted with power plants-virtually all coal-fired. There is only one nuclear plant and two hydroelectric produced in South Africa comes from Eskom, the state-owned utility, and 90% total comes from coal-fired units

  18. Temporal trends and spatial variation characteristics of primary air pollutants emissions from coal-fired industrial boilers in Beijing, China.

    Science.gov (United States)

    Xue, Yifeng; Tian, Hezhong; Yan, Jing; Zhou, Zhen; Wang, Junling; Nie, Lei; Pan, Tao; Zhou, Junrui; Hua, Shenbing; Wang, Yong; Wu, Xiaoqing

    2016-06-01

    Coal-fired combustion is recognized as a significant anthropogenic source of atmospheric compounds in Beijing, causing heavy air pollution events and associated deterioration in visibility. Obtaining an accurate understanding of the temporal trends and spatial variation characteristics of emissions from coal-fired industrial combustion is essential for predicting air quality changes and evaluating the effectiveness of current control measures. In this study, an integrated emission inventory of primary air pollutants emitted from coal-fired industrial boilers in Beijing is developed for the period of 2007-2013 using a technology-based approach. Future emission trends are projected through 2030 based on current energy-related and emission control policies. Our analysis shows that there is a general downward trend in primary air pollutants emissions because of the implementation of stricter local emission standards and the promotion by the Beijing municipal government of converting from coal-fired industrial boilers to gas-fired boilers. However, the ratio of coal consumed by industrial boilers to total coal consumption has been increasing, raising concerns about the further improvement of air quality in Beijing. Our estimates indicate that the total emissions of PM10, PM2.5, SO2, NOx, CO and VOCs from coal-fired industrial boilers in Beijing in 2013 are approximately 19,242 t, 13,345 t, 26,615 t, 22,965 t, 63,779 t and 1406 t, respectively. Under the current environmental policies and relevant energy savings and emission control plans, it may be possible to reduce NOx and other air pollutant emissions by 94% and 90% by 2030, respectively, if advanced flue gas purification technologies are implemented and coal is replaced with natural gas in the majority of existing boilers. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Managing produced water from coal seam gas projects: implications for an emerging industry in Australia.

    Science.gov (United States)

    Davies, Peter J; Gore, Damian B; Khan, Stuart J

    2015-07-01

    This paper reviews the environmental problems, impacts and risks associated with the generation and disposal of produced water by the emerging coal seam gas (CSG) industry and how it may be relevant to Australia and similar physical settings. With only limited independent research on the potential environmental impacts of produced water, is it necessary for industry and government policy makers and regulators to draw upon the experiences of related endeavours such as mining and groundwater extraction accepting that the conclusions may not always be directly transferrable. CSG is widely touted in Australia as having the potential to provide significant economic and energy security benefits, yet the environmental and health policies and the planning and regulatory setting are yet to mature and are continuing to evolve amidst ongoing social and environmental concerns and political indecision. In this review, produced water has been defined as water that is brought to the land surface during the process of recovering methane gas from coal seams and includes water sourced from CSG wells as well as flowback water associated with drilling, hydraulic fracturing and gas extraction. A brief overview of produced water generation, its characteristics and environmental issues is provided. A review of past lessons and identification of potential risks, including disposal options, is included to assist in planning and management of this industry.

  20. A World-Ecological Perspective on Socio-Ecological Transformation in the Appalachian Coal Industry

    Directory of Open Access Journals (Sweden)

    Ben Marley

    2015-08-01

    Full Text Available This article discusses the exhaustion of socio-ecological relations in the coalfields of West Virginia. We use the term socio-ecological to signify "the interwoven character and the indispensable unity of social and natural life" (Araghi 2009: 115. In particular we use classic literatures on labor history in the coalfields of central Appalachia and contemporary studies of mountaintop removal to think about phases of socio-ecological relations of the coal industry. We argue for the interrelationality of the social and the ecological in place of conventional eco-M arxist approaches which treat these as relatively independent units. This enables us to situate nature as an active component of capitalist developmental processes. We argue that the exhaustion of socio-ecological relations in the coalfields of West Virginia is an outcome of material practices within the phase of extraction using mountaintop removal, historical changes in the conditions of production in the coalfields, and of new forms of competition from other regions and energy sources. We find that the relative exhaustion of central Appalachian coal is tempered by favorable international markets and a specialization in metallurgical coal.

  1. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

    1974-01-01

    The author has identified the following significant results. The mine refuse inventory maps were prepared in response to a need by both the State and the coal industry. The lack of information on the scope of the problem handicapped all people concerned in drafting realistic legislation for a severance tax on coal production to raise funds for restoration of refuse sites. The inventory was conducted rapidly and economically, and demonstrated the benefits which can be derived through remote sensing methods.

  2. Coal-92

    International Nuclear Information System (INIS)

    Hillring, B.; Sparre, C.

    1992-11-01

    Swedish consumption of coal and coke during 1991 and trends in technology, environment and market aspects of coal use are reported. Steam coal use in the heating sector was unchanged from 1991, 1.2 Mtons. Reduced consumption in smaller district heating units (due to conversion to biofuels and gas) was compensated by increased use for power generation in cogeneration plants. Coal consumption in industry fell 0.10 Mton to 0.84 Mton due to lower production in one industry branch. Import of steam coal was 1.1 Mton (down 0.5 Mton from 1990) since new rules for strategic reserves allowed a reduction of stocks. During the last five years stocks have been reduced by 2 Mtons. Import of metallurgical coal was 1.6 Mton, unchanged from 1990. The report also gives statistics for the coal using plants in Sweden, on coal R and D, and on emission laws for coal firing. (9 tabs., 2 figs.)

  3. Review of China's Low-Carbon City Initiative and Developments in the Coal Industry

    Energy Technology Data Exchange (ETDEWEB)

    Fridley, David [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Khanna, Nina Zheng [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hong, Lixuan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2012-09-01

    As China continues its double-digit economic growth, coal remains the principal fuel for the country’s primary energy consumption and electricity generation. China’s dependence on coal in coming years makes its carbon emission intensity reduction targets more difficult to achieve, particularly given rising electricity demand from a growing number of Chinese cities. This paradox has led the government to pursue cleaner and more efficient development of the coal industry on the supply side and “low carbon” development of cities on the demand side. To understand and assess how China may be able to meet its energy and carbon intensity reduction targets, this report looks at the recent development of low carbon cities as well as new developments and trends in the coal industry. Specifically, we review low-carbon city and related eco-city development in China before delving into a comparison of eight pilot lowcarbon city plans to highlight their strengths and weaknesses in helping achieve national energy and carbon targets. We then provide insights into the future outlook for China’s coal industry by evaluating new and emerging trends in coal production, consumption, transport, trade and economic performance.

  4. Study of otoacoustic emissions in workers of various professional groups of the coal industry

    Directory of Open Access Journals (Sweden)

    Shydlovska T.A.

    2015-09-01

    Full Text Available Noise influence takes one of the leading roles in the development of sensorineural hearing loss (SHL. At the same time professional deafness steadily occupies the 5th place in the structure of occupational diseases in Ukraine over the past few years. Of special importance is the problem of pre-clinical and early diagnosis of occupational hearing deterioration, in sense of timely prophylactic and rehabilitation measures in “risk group” workers. The objective research methods play an important role in the diagnosis of auditory analyzer state. Many scientific studies have shown the diagnostic effectiveness of method of otoacoustic emissions recording in the early diagnosis of lesions of receptor part of auditory analyzer. It is known that SHL of noise genesis largely affects the receptor part of the auditory analyzer, for which the OAE method has great practical diagnostic significance. Objective: to study informativity indicators of otoacoustic emission for the diagnosis of sensorineural hearing loss in various occupational groups of coal workers in Ukrainian mines. Materials and Methods: Auditory function of 87 workers of the coal industry (drifters, miners and longwall miners with different levels of industrial noise and hygienic conditions in their workplaces was: 28 studied drifters (group 1, 25 miners (group 2 and 34 longwall miners (group 3. Work experience in noise in these groups was 17,9±1,0; 23,1±1,0 and 22,2±2,0 accordingly. Noise ratio in drifters was 93,6±4,9 dBA, in miners – 92,9±5,5 dBA and in longwall miners – 86,5±6,04 dBA accordingly, while the maximum permitted level is 80 dBA. The research was conducted on the analyzing system "Eclipse" "Interacoustics" (Denmark. All patients underwent registratiov of the caused OAE at frequency distortion product (DPOAE at frequencies 1-6 kHz. The results were rated using variation statistics Student's test. Results: The most prominent violation of the receptor part of the

  5. Turning Rough Dreams into a Polished Reality? Investigating the Formation of Human Capital in Botswana’s Diamond Cutting and Polishing Industry

    OpenAIRE

    Mbayi, Letsema

    2013-01-01

    This thesis investigates Botswana’s vision to become a downstream player in the global diamond industry by creating downstream capabilities that can continue to benefit the country when diamond mining is no longer profitable. Botswana is the largest producer of diamonds, accounting for a quarter of the world’s diamond production by value. The government has used diamond revenues to foster economic growth. The diamond-led growth has however resulted in a largely undiversified economy with limi...

  6. Integrated process control for recirculating cooling water treatment in the coal chemical industry.

    Science.gov (United States)

    Pei, Y S; Guo, W; Yang, Z F

    2011-01-01

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target limits for different water sources. Makeup water was mixed with water produced from reverse osmosis (RO) in the proportion of 6:4, which notably reduced salts discharge. Side infiltration, which settled down suspended solids, can reduce energy consumption by over 40%. An automated on-line monitoring organic phosphorus inhibitor feed maintains the RCW system stability in comparison to the manual feed. Two-step electrosorb technology (EST) instead of an acid feed can lead cycle of concentration of water to reach 7.0. The wastewater from RO, EST and filter was transferred into a concentration treatment system where metallic ions were adsorbed by permanent magnetic materials. Separation of water and salts was completed by using a magnetic disc separator. Applying the integrated process in a coal chemical industry, a benefit of 1.60 million Yuan annually in 2 years was gained and approximate zero emission was achieved. Moreover, both technical and economic feasibility were demonstrated in detail.

  7. Soft capitalism and a hard industry: virtualism, the 'transition industry' and the restructuring of the Ukrainian coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Adam Swain [University of Nottingham (United Kingdom). School of Geography

    2006-06-15

    This paper examines the geographical transfer of economic knowledge and practices from centres of neoliberalism in North America and Western Europe to post-soviet Ukraine. The paper argues that a 'transition industry' emerged in the wake of the disintegration of the soviet system whose purpose was to realize economic transition in central and eastern Europe. The paper discusses the emergence of a community of academic and professional economists affiliated to international financial institutions and academic and professional economic research organizations in Kyiv engaged in promoting the Washington consensus. This community identified the coal industry, located in the Ukrainian Donbas, as a barrier to structural economic reform and the political re-alignment of the country. The paper then examines the way the World Bank unsuccessfully attempted to force the coal industry to conform to its own policy prescriptions. The example points to the articulation not only of extra-local and internal processes of neoliberalization, but also with indigenous informal marketization. In this instance the World Bank's vision failed to materialize because state power could not be allied to its neoliberal project.

  8. Coal mining in the power industry of the Federal Republic of Germany in 2015

    International Nuclear Information System (INIS)

    2016-11-01

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2015. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  9. Coal mining in the power industry of the Federal Republic of Germany in 2016

    International Nuclear Information System (INIS)

    2017-11-01

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2016. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  10. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 2

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce; Winton, Shea

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to

  11. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 5

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce; Shea, Winton

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or {approx}28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In

  12. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 3

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce; Shea, Winton

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to

  13. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 4

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce; Shea, Winton

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or {approx}28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In

  14. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce; Winton, Shea

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to

  15. Discovery and ramifications of incidental Magnéli phase generation and release from industrial coal-burning.

    Science.gov (United States)

    Yang, Yi; Chen, Bo; Hower, James; Schindler, Michael; Winkler, Christopher; Brandt, Jessica; Di Giulio, Richard; Ge, Jianping; Liu, Min; Fu, Yuhao; Zhang, Lijun; Chen, Yuru; Priya, Shashank; Hochella, Michael F

    2017-08-08

    Coal, as one of the most economic and abundant energy sources, remains the leading fuel for producing electricity worldwide. Yet, burning coal produces more global warming CO 2 relative to all other fossil fuels, and it is a major contributor to atmospheric particulate matter known to have a deleterious respiratory and cardiovascular impact in humans, especially in China and India. Here we have discovered that burning coal also produces large quantities of otherwise rare Magnéli phases (Ti x O 2x-1 with 4 ≤ x ≤ 9) from TiO 2 minerals naturally present in coal. This provides a new tracer for tracking solid-state emissions worldwide from industrial coal-burning. In its first toxicity testing, we have also shown that nanoscale Magnéli phases have potential toxicity pathways that are not photoactive like TiO 2 phases, but instead seem to be biologically active without photostimulation. In the future, these phases should be thoroughly tested for their toxicity in the human lung.Solid-state emissions from coal burning remain an environmental concern. Here, the authors have found that TiO2 minerals present in coal are converted into titanium suboxides during burning, and initial biotoxicity screening suggests that further testing is needed to look into human lung consequences.

  16. Elaboration of a quantitative job-exposure matrix for historical exposure to airborne exposures in the Polish rubber industry.

    Science.gov (United States)

    de Vocht, F; Sobala, W; Peplonska, B; Wilczynska, U; Gromiec, J; Szeszenia-Dabrowska, N; Kromhout, H

    2008-11-01

    A job-exposure matrix (JEM) for inhalable aerosols, aromatic amines, and cyclohexane soluble matter (CSM) was elaborated based on measurements collected routinely between 1981 and 1996. The data were grouped based on similarities in exposure levels and time trends in different departments, and were analyzed using smoothing splines and mixed effects models. Although higher than in western European countries, inhalable aerosol exposure decreased after changes in production volume and implementation of exposure reduction measures in mid-1980s. Aromatic amines concentrations first increased following the factory's production volume, but subsequently decreased in more recent years. CSM concentrations were uniformly distributed between departments. This JEM provides an overview of historical exposure levels in a large Polish rubber factory and will enable estimation of lifetime exposure for individual workers in a Polish rubber workers cohort and further investigation of the associations between specific exposures and cancer risk. Copyright 2008 Wiley-Liss, Inc.

  17. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    International Nuclear Information System (INIS)

    Shah, S.F.A.; Aftab, A.; Soomro, N.; Nawaz, M.S.; Vafai, K.

    2015-01-01

    The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO), granulated activated carbon (GAC) bed, etc. The treatment efficiency was improved by coupling coagulants with fly ash adsorbent bed. The ash was collected from coal fired boilers of power plant at Lakhra Power Generation Company, Jamshoro, Pakistan. The use of this ash resolved the disposal and environmental issues by treating wastewater of chemical, dyes and pigment industry. The treatment bed comprised of briquettes of coal fly ash coupled with commercial coagulant ferrous sulfate-lime reduced COD, color, turbidity and TSS of effluent remarkably. An adsorption capacity and chemical behavior of fly ash bed was also studied. In coagulation treatment, coagulant FeSO/sun 4/-lime influenced reduction of COD, color, turbidity and TSS by 32 percentage, 48 percentage, 50 percentage and 51 percentage, respectively. The CFAB coupled with coagulant, resulted an excessive removal of color, TSS, COD, and turbidity by 88 percentage, 92 percentage, 67 percentage and 89 percentage, respectively. (author)

  18. Waste Water Treatment-Bed of Coal Fly Ash for Dyes and Pigments Industry

    Directory of Open Access Journals (Sweden)

    Syed Farman Ali Shah

    2015-12-01

    Full Text Available The highly porous power plant waste ashes have been utilized to treat toxic effluent of a dyes manufacturing plant. An attempt has been made for the first time in Pakistan, to generate an effective and economically sound treatment facility for the toxic effluent of a dyes manufacturing plant. This is an indigenous bed which could replace expensive treatment facilities, such as reverse osmosis (RO, granulated activated carbon (GAC bed, etc. The treatment efficiency was improved by coupling coagulants with fly ash adsorbent bed. The ash was collected from coal fired boilers of power plant at Lakhra Power Generation Company, Jamshoro, Pakistan. The use of this ash resolved the disposal and environmental issues by treating wastewater of chemical, dyes and pigment industry. The treatment bed comprised of briquettes of coal fly ash coupled with commercial coagulant ferrous sulfate-lime reduced COD, color, turbidity and TSS of effluent remarkably. An adsorption capacity and chemical behavior of fly ash bed was also studied. In coagulation treatment, coagulant FeSO4-lime influenced reduction of COD, color, turbidity and TSS by 32%, 48%, 50% and 51%, respectively. The CFAB coupled with coagulant, resulted an excessive removal of color, TSS, COD, and turbidity by 88%, 92%, 67% and89%, respectively.

  19. Risk evaluation of lost-time injuries in the coal mining industry of Pakistan

    International Nuclear Information System (INIS)

    Jadoon, K.G.; Edwards, J.S.

    1999-01-01

    Lost-time accidents frequently occur in underground coal mining, which result in a substantial amount of lost workdays. In order to evaluate injury risks for the underground mining industry in Pakistan, two years record of lost time accidents were collected and analysed. Risk indices were computed for different variables, such as cause of accidents; age and job of the injured person; place of accidents; and part of the body injured. These indices incorporate information that has not been used in traditional accident analysis. Fall of ground type accidents were the major cause followed by haulage and transport. More than 50 % of accidents occurred at or Near the working faces and coal cutters/ face workers were found to be at a higher risk as compared to all other job categories. Injuries to hand and foot for all group of workers were comparatively higher than those to all other parts of the body; Workers in the age group of (21-30) years were involved in the majority of the lost time accidents. Regular and systematic analysis of lost time accidents should be made which may be helpful in reducing the frequency and severity of these accidents. (author)

  20. Assessment of an atmospheric fluidized-bed coal-combustion gas-turbine cogeneration system for industrial application

    Energy Technology Data Exchange (ETDEWEB)

    Graves, R. L.; Holcomb, R. S.; Tallackson, J. R.

    1979-10-01

    This study was initiated to provide information on the future potential industrial market for a cogeneration system consisting of a fluidized-bed coal combustor coupled to a gas-turbine (Brayton cycle) power system that uses air as the working fluid. In assessing the potential applications for the system, the process heat energy consumption by industry is identified, with special detail included on the six most energy-intensive industries. The potential impact on the nation's oil and natural gas consumption that would result from wide-spread utilization of coal for process heat is also estimated. The fraction of industrial process heat that the system could feasibly satisfy from a thermodynamic viewpoint is estimated, and the performance (potential fuel efficiency and heat/power ratio) of the atmospheric fluidized-bed gas-turbine system is calculated. Also treated are several specific case studies of industries in which the system could be incorporated. Major parameters are specified, and flow sheets are derived for systems that would satisfy the heat and power requirements of the process or industry. The overall fuel utilization efficiency, thermal power rating, and potential number of installations are specified for these case studies. The findings of the study indicate that there is a sizable potential market for the system, with over 1000 possible installations disclosed after reviewing only 8 specific industries from 6 major Standard Industrial Classification (SIC) groups. The potential displacement of oil and gas by coal in process heating is shown to be about 1.60 m/sup 3//sec (870,000 bbl/d) of oil and 4590 m/sup 3//sec (14.0 billion ft/sup 3//d) of natural gas for all industries combined. Continued development of the fluidized-bed coal combustor and power system is recommended so that this potential may be at least partially realized.

  1. Globalisation, transition and development in China. The case of the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Huaichuan Rui

    2004-07-01

    The author aims to explain China's development strategy and its underlying forces, and the success of this strategy. It examines China's gradualist approach which emphasises development first and regards transition and globalisation as secondary, enacting liberalisation of domestic markets and integration into the world economy in a paced way, avoiding dramatic changes which might impede or even reverse development. The author argues that this approach is broadly correct. She considers China's failures, including the failure to build large globally competitive corporations despite the intention to do this, and shows how China's economic strategy has been implemented in detail with a case study of the coal industry.

  2. Dynamic analysis on market structure of China's coal industry

    International Nuclear Information System (INIS)

    Yang, Qing; Zhang, Lei; Wang, Xin

    2017-01-01

    According to industrial organization theory, market structure is a crucial factor to market performance. Based on the VAR model and the data from 1994 to 2014, we revealed the dynamic response route of the market structure to these factors and the change process of contribution rate of these factors to the market structure. It shows that market structure is inertial adjustment; technology advance and industry policy have continuous effects on improvement of market concentration ratio; market size and production scale have sustained negative effects on market concentration ratio; fixed capital has barrier effect, which is mainly the entry barrier effect at the beginning, and then the exit barrier effect continues to play a leading role. Therefore, the government has no need to introduce special policies to encourage merger or expansion on the capacity as enterprises would do it spontaneously; it is necessary to make market access system stricter, to improve exit compensation mechanism and to promote technological innovation; all these policies need dynamic adjustment based on the stages of economic cycle. - Highlights: • The adjustment mechanism of China's coal market structure is revealed. • Technology and industry policy are significant factors to optimize the market structure. • The government need not introduce special policy to encourage merger. • The market access system should be stricter. • Policies strength should be dynamically adjusted based on the economic cycle.

  3. Energy price slump and policy response in the coal-chemical industry district: A case study of Ordos with a system dynamics model

    International Nuclear Information System (INIS)

    Wang, Delu; Ma, Gang; Song, Xuefeng; Liu, Yun

    2017-01-01

    We employ system dynamics method towards a coal-chemical industry district economy evolution model, using coal industry, the coal-chemical industry, their downstream industries, and the manufacture-related service industry. Moreover, we construct energy price and policy response scenarios based on Ordos’ management experience. The results show that the energy price slump had a negative impact on the overall economic development of the coal-chemical industry district, despite promoting non-resource industries. Furthermore, policies had different effects on the industry's output value and profit. In the long-term, developing alternative industries (AI) helps increase the industrial output value and profit. Decreasing value added tax (VAT) has immediate results and a distinctive effect on industrial short-term production value and profit, its long-term effect being limited. The effect of production limit (PL) on industrial profit is stronger than output value, and financial support (FS) is more conducive to improve the latter. However, coal mining and coal-chemical loan increases decrease the gross industrial profit level. Technology innovation (TI) has the best individual policy overall effect on production value and profits. Furthermore, the simultaneous implementation of PL, TI and AI can generate the synergy effect for each of them. And the simultaneous implementation of VAT and one or couple of other policies will generate the crowding-out effect both for VAT and other policies. - Highlights: • A system dynamics model of the coal-chemical industry district economy evolution in Ordos is constructed. • The impact of coal and oil prices slump on the output value and profit of each industry is revealed. • The differences in the effects especially cumulative effects of different response policies are clarified. • The crowding-out and synergy effects of policy implementation are analyzed.

  4. Opportunities in low-rank coal applications for synfuels and power industries in Mexico

    International Nuclear Information System (INIS)

    Winch, R.A.; Alejandro, I.; Hernandez, G.

    1992-01-01

    The utilization of domestic coal is an important ingredient in the generation strategy of electricity in Mexico. The relative ranking of the MICARE and Sabinas coals, compared to other coals tested at the Energy and Environmental Research Center (EERC) pilot test facility at Grand Forks is an important factor for future economic fuel studies. A test comparison between US and Mexican coals was made and observations are listed

  5. The Late Paleozoic relative gas fields of coal measure in China and their significances on the natural gas industry

    Directory of Open Access Journals (Sweden)

    Chenchen Fang

    2016-12-01

    Full Text Available The coal measure gas sources of coal-derived gas fields in the Late Paleozoic China are the Lower Carboniferous Dishuiquan Formation, the Upper Carboniferous Batamayineishan Formation and Benxi Formation, the Lower Permian Taiyuan Formation and Shanxi Formation, and the Upper Permian Longtan Formation. The coal-derived gas accumulates in Ordovician, Carboniferous, Permian, and Paleocene reservoirs and are distributed in Ordos Basin, Bohai Bay Basin, Junggar Basin, and Sichuan Basin. There are 16 gas fields and 12 of them are large gas fields such as the Sulige large gas field which is China's largest reserve with the highest annual output. According to component and alkane carbon isotope data of 99 gas samples, they are distinguished to be coal-derived gas from coal-derived gas with δ13C2 > −28.5‰ and δ13C1 -δ13C2 -δ13C3 identification chart. The Late Paleozoic relative gas fields of coal measure are significant for the Chinese natural gas industry: proven natural gas geological reserves and annual output of them account for 1/3 in China, and the gas source of three significant large gas fields is coal-derived, which of five significant large gas fields supporting China to be a great gas producing country. The average reserves of the gas fields and the large gas fields formed from the late Paleozoic coal measure are 5.3 and 1.7 times that of the gas fields and the large gas fields in China.

  6. Development and Testing of Industrial Scale Coal Fired Combustion System, Phase 3

    Energy Technology Data Exchange (ETDEWEB)

    Bert Zauderer

    1998-09-30

    Coal Tech Corp's mission is to develop, license & sell innovative, lowest cost, solid fuel fired power systems & total emission control processes using proprietary and patented technology for domestic and international markets. The present project 'DEVELOPMENT & TESTING OF INDUSTRIAL SCALE, COAL FIRED COMBUSTION SYSTEM, PHASE 3' on DOE Contract DE-AC22-91PC91162 was a key element in achieving this objective. The project consisted of five tasks that were divided into three phases. The first phase, 'Optimization of First Generation 20 MMBtu/hr Air-Cooled Slagging Coal Tech Combustor', consisted of three tasks, which are detailed in Appendix 'A' of this report. They were implemented in 1992 and 1993 at the first generation, 20 MMBtu/hour, combustor-boiler test site in Williamsport, PA. It consisted of substantial combustor modifications and coal-fired tests designed to improve the combustor's wall cooling, slag and ash management, automating of its operation, and correcting severe deficiencies in the coal feeding to the combustor. The need for these changes was indicated during the prior 900-hour test effort on this combustor that was conducted as part of the DOE Clean Coal Program. A combination of combustor changes, auxiliary equipment changes, sophisticated multi-dimensional combustion analysis, computer controlled automation, and series of single and double day shift tests totaling about 300 hours, either resolved these operational issues or indicated that further corrective changes were needed in the combustor design. The key result from both analyses and tests was that the combustor must be substantially lengthened to maximize combustion efficiency and sharply increase slag retention in the combustor. A measure of the success of these modifications was realized in the third phase of this project, consisting of task 5 entitled: 'Site Demonstration with the Second Generation 20 MMBtu/hr Air-Cooled Slagging Coal Tech

  7. Polish visit

    CERN Document Server

    2003-01-01

    On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

  8. Raw-materials mixtures from waste of the coal industry for production of ceramic materials

    Energy Technology Data Exchange (ETDEWEB)

    Galpern, E.I. [Scientific-Manufacturing Enterprise ``Ceramics``, Donetsk (Ukraine); Pashchenko, L.V. [Inst. of Physical, Organic and Coal Chemistry of NASU, Donetsk (Ukraine)

    1998-09-01

    The liquidation of waste dumps on the surface of mining enterprises and realization of measures by environment protection of air and aquatic basins are connected to the complex processing of mining mass. The main directions of utilization of mining rocks and coal wastes realized in Ukraine industry are: - filling of mines worked-out area by grouting solutions; - ceramic brick, porous filling materials and binding materials production; - road-making, construction of hydrostructures and industrial objects; - output of concrete items predominantly for using in mining conditions. The peculiarity of wastes using in above-mentioned fields is the possibility of their mass application in quantities commensurable with valumes of their yields. The experience of enterprises work which process mining rocks into building materials by burning method (ceramic brick, porous aggregates of concretes as aggloporite, expanded clay aggregate) has shown that unconstant and, as the rule, exceeding norms content of carbon and sulphur in the rock results to deterioration of products quality and technological factors of production. Unstability of carbon content in raw material makes the burning process hardly operated. Obtained products having residual carbon in the view of coke residue are often characterized by lower physical-mechanical characteristics. (orig./SR)

  9. THE ROMANIAN COAL INDUSTRY IN THE CONTEXT OF ECONOMIC GLOBAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    DINA IONELA-CLAUDIA

    2010-12-01

    Full Text Available In the last century, the world has seen an acceleration of technological development in almost all the fields related to human life, leading to rapid improvement of living standards in most countries. Electricity industry is a basic economic branch, and is also a branch with high importance to the economy and social life of any country. This branch, which currently is the base of industrial, agricultural, transportation and telecommunications activities, and which characterizes the entire modern world civilization, began to develop only towards the late of the XXth century. Electricity is an energy form easily usable in production, household consumption, transport, telecommunications etc. It was the one that revolutionized manufacturing resources and equipment used in all fields. Electricity production worldwide has increased about 30 times since 1938. Coal maintained a vital role in the total energy sources, especially by ensuring price stability which is a major and indispensable factor for stability and further economic growth, and also by its distribution around the globe.

  10. Supply constraints : Australia and Canada coal industry face logistics and capacity challenges

    International Nuclear Information System (INIS)

    Borsato, J.

    2010-01-01

    Australia and Canada are benefiting from a global increase in coal consumption, but face challenges regarding coal and coal export capacity. Coal is Australia's biggest export commodity, accounting for over 50 percent of world coking coal exports, with almost 75 percent of those exports destined for Asian markets, primarily Japan. However, the number of ships delayed at Australian ports hit a record of 223 bulk carriers in early 2010. Compared to Canada, Australia faces greater logistical issues getting coal into port and onto ships at its 9 loading terminals. Two of Canada's 3 major shipping terminals, Westshore and Neptune, have some additional capacity. Its third terminal, Ridley Island, has considerable potential to carry more coal. With 98 percent of all coal moved by rail in Australia, rail issues also hinder growth. A national approach to planning freight transport on both roads and rail is being developed. While infrastructure issues remain the single greatest barrier to export growth for Australia's coal sector, Canada's most immediate issues pertain to mine permitting and mine-site expansion. In 2009, Canada exported 28 million tonnes of coal, 90 percent of it metallurgical. With approximately 70 million tonnes of annual production, mostly in British Columbia and Alberta, coal remains the number one commodity in Canada carried by rails and shipped from ports. 1 fig.

  11. Unexpected Dominance of Elusive Acidobacteria in Early Industrial Soft Coal Slags

    Directory of Open Access Journals (Sweden)

    Carl-Eric Wegner

    2017-06-01

    Full Text Available Acid mine drainage (AMD and mine tailing environments are well-characterized ecosystems known to be dominated by organisms involved in iron- and sulfur-cycling. Here we examined the microbiology of industrial soft coal slags that originate from alum leaching, an ecosystem distantly related to AMD environments. Our study involved geochemical analyses, bacterial community profiling, and shotgun metagenomics. The slags still contained high amounts of alum constituents (aluminum, sulfur, which mediated direct and indirect effects on bacterial community structure. Bacterial groups typically found in AMD systems and mine tailings were not present. Instead, the soft coal slags were dominated by uncharacterized groups of Acidobacteria (DA052 [subdivision 2], KF-JG30-18 [subdivision 13], Actinobacteria (TM214, Alphaproteobacteria (DA111, and Chloroflexi (JG37-AG-4, which have previously been detected primarily in peatlands and uranium waste piles. Shotgun metagenomics allowed us to reconstruct 13 high-quality Acidobacteria draft genomes, of which two genomes could be directly linked to dominating groups (DA052, KF-JG30-18 by recovered 16S rRNA gene sequences. Comparative genomics revealed broad carbon utilization capabilities for these two groups of elusive Acidobacteria, including polysaccharide breakdown (cellulose, xylan and the competence to metabolize C1 compounds (ribulose monophosphate pathway and lignin derivatives (dye-decolorizing peroxidases. Equipped with a broad range of efflux systems for metal cations and xenobiotics, DA052 and KF-JG30-18 may have a competitive advantage over other bacterial groups in this unique habitat.

  12. Influence of Environmentally Friendly and High-Efficiency Composite Additives on Pulverized Coal Combustion in Cement Industry

    Directory of Open Access Journals (Sweden)

    Zhiyong Wang

    2016-01-01

    Full Text Available 4 kinds of chemical reagents and 3 kinds of industrial wastes were selected as burning additives for 2 kinds of coals in cement industry. The work focused on the replacement of partial chemical reagents by industrial wastes, which not only reduced the cost and took full advantage of industrial wastes, but also guaranteed the high combustion efficiency and removed the NOX and SO2 simultaneously. The experiments were carried out in DTF. The combustion residues were analyzed by SEM and XRD. The results showed that the burnout rate was increased after adding the additives; meanwhile, the NOX and SO2 release concentration were reduced, but the degree of action varied for different additives and coals. The substitute of chemical reagents by industrial wastes was very effective; overall, the cold-rolled iron oxide worked better than others; the particles surface was tougher and the peaks of crystalline phase were lower than raw coal, which indicated that the additives played good roles in combustion process.

  13. Compare pilot-scale and industry-scale models of pulverized coal combustion in an ironmaking blast furnace

    Science.gov (United States)

    Shen, Yansong; Yu, Aibing; Zulli, Paul

    2013-07-01

    In order to understand the complex phenomena of pulverized coal injection (PCI) process in blast furnace (BF), mathematical models have been developed at different scales: pilot-scale model of coal combustion and industry-scale model (in-furnace model) of coal/coke combustion in a real BF respectively. This paper compares these PCI models in aspects of model developments and model capability. The model development is discussed in terms of model formulation, their new features and geometry/regions considered. The model capability is then discussed in terms of main findings followed by the model evaluation on their advantages and limitations. It is indicated that these PCI models are all able to describe PCI operation qualitatively. The in-furnace model is more reliable for simulating in-furnace phenomena of PCI operation qualitatively and quantitatively. These models are useful for understanding the flow-thermo-chemical behaviors and then optimizing the PCI operation in practice.

  14. Rent-seeking mechanism for safety supervision in the Chinese coal industry based on a tripartite game model

    International Nuclear Information System (INIS)

    Chen, Hong; Feng, Qun; Cao, Jing

    2014-01-01

    There are extensive governmental rent-seeking activities in safety supervision of the Chinese coal industry. The rents come from industry safety barriers, low resource taxes, and privilege policies for coalmining enterprises. The rent-seeking mechanism was analyzed using a model comprising dynamic games with incomplete information. The equilibrium results indicate that the probability of national supervision is influenced by penalties and bribery: there is negative correlation with penalties and positive correlation with bribery. The rent-seeking probability of a governmental safety supervision department is influenced by several factors, and positively correlates with the cost of national supervision. The probability of bribery of coalmining enterprises is influenced by several factors, and positively correlates with wages of governmental departments and a reasonable rent-seeking range. Reversed rent-seeking reduces the probability of bribery, but it's not worth recommending. Some recommendations are proposed. - Highlights: • We analyze rent-seeking mechanism for safety supervision in the coal industry. • A dynamic game with incomplete information for Chinese coal industry is built. • Reversed rent-seeking is proposed as a new rent-seeking form. • We analyze the selection probability of the three participants. • We give some policies about how to enhance safety supervision

  15. Szczyrk Conference Papers -- Part II. Coal: Issues for the Eighties

    OpenAIRE

    Vorontsov, N.V.

    1980-01-01

    This volume is the second of two Collaborative Papers which contain the technical papers presented at an IIASA Seminar under the generic title 'Coal: Issues for the Eighties' which was held in Szczyrk, Poland in November 1979. The seminar was jointly organized by IIASA and the Polish institutes collaborating in this study. The papers are here reproduced for the convenience of those attending the seminar and for reference by those involved in this continuing industry study. The first volume co...

  16. Protocol in NORM industries. Central thermal coal production; Protocolo de actuacion en industrial NORM. Centrales de produccion termica de carbon

    Energy Technology Data Exchange (ETDEWEB)

    Robles, B.; Mora, J. C.; Corbacho, J. A.; Baeza, A.; Cancio, D.

    2011-07-01

    This protocol arises from the execution of R and D project Study of the radiological impact of coal power plants on their environment, funded by the Nuclear Safety Council. Its main objective was to assess the radiological impact exerted on workers and their environments, the four coal-fired power more currently in Spain: As Pontes (A Coruna), Compostilla II (Leon ),Litoral (Almeria) and Andorra (Teruel). (Author)

  17. Risk management of energy efficiency projects in the industry - sample plant for injecting pulverized coal into the blast furnaces

    OpenAIRE

    Jovanović Filip P.; Berić Ivana M.; Jovanović Petar M.; Jovanović Aca D.

    2016-01-01

    This paper analyses the applicability of well-known risk management methodologies in energy efficiency projects in the industry. The possibilities of application of the selected risk management methodology are demonstrated within the project of the plants for injecting pulverized coal into blast furnaces nos. 1 and 2, implemented by the company US STEEL SERBIA d.o.o. in Smederevo. The aim of the project was to increase energy efficiency through the reductio...

  18. Coal and the competition

    Energy Technology Data Exchange (ETDEWEB)

    Morey, M. [RDI Consulting, Arlington, VA (United States). FT Energy

    2000-07-01

    24 overheads/viewgraphs outline a presentation on competition in the US coal industry. It discussed four main subjects: key factors driving coal demand (environmental regulations, electric utility deregulation; competition with natural gas, inter-regional coal competition, supply availability and pricing; and the export market and competition from off-shore coal sources); coal's ability to boost market share; shifts in coal distribution and the risk of more branded coal; and attempts to keep more regional sources of coal in business. State tax incentives for coal use in Arizona, Ohio, Oklahoma, Virginia and Alabama were discussed.

  19. The economic case for industrial application of low-rank coal technology

    International Nuclear Information System (INIS)

    Irwin, W.

    1991-01-01

    The World Coal Institute estimates coal should overtake oil as the world's largest source of primary energy by the turn of the century. Current world coal production of 3.6 billion tons in 1990 is predicted to rise to 4 billion tons by the year 2000. It is conceded that a major environmental problem with burning coal is the so-called greenhouse effect. The question is how do you use the new technologies that have been developed which now allow coal to be burned with minimum damage to the environment. Despite their technical merits, acceptance of these new technologies is slow because they appear uncompetitive when compared with historic energy costs. Unless economic comparisons include some form of environmental evaluation, this issue will continue to be a barrier to progress. To avoid stagnation and provide the necessary incentive for implementing badly needed change, structural changes in energy economics need to be made which take into account the environmental cost element of these emerging new technologies. The paper discusses coal trade and quality and then describes the three main areas of development of clean coal technologies: coal preparation, combustion, and flue gas treatment

  20. Energy efficiency and steam coal transport over long distances

    Directory of Open Access Journals (Sweden)

    Stala-Szlugaj Katarzyna

    2016-01-01

    Full Text Available Coal is one of the most important energy sources in the world. Its main consumers are the energy sector (with a 37-46% share in the years 1990-2014; 1.12-2.34 billion toe and industry (24-27%; 0.78-1.38 billion toe. Diversified distribution of coal deposits in the world in relation to its consumers means that it has to be transported over often very long distances. The global coal trade is dominated by maritime transport (90-94% in the years 2004-2014, and the share of transport by land is relatively smaller. The aim of the article was to calculate the index describing what part of the energy contained in the coal transported on a particular route is consumed by the train carrying it. Due to the dominant position of the Russian Federation in imports of coal to Poland, it was assumed that coal will be imported by rail from Kuzbass (Russia's largest coal basin. As a result of the calculation, it was found that the rate of energy consumption for transport of imported coal will be somewhere in the range of 9.22-15.26%. In the case of deliveries of hard coal from Polish producers to the power plants the calculated rate changes within the range of 0.55-0.58%.

  1. Systems analysis on the humanization of industrial life in the coal mining industry. Pt. 2. Results. Systemanalyse zur Humanisierung des Arbeitslebens im Steinkohlenbergbau. T. 2. Ergebnisse

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Volume No. 8 of the series of papers quantifies the system of aims, i.e. it defines synthetic data of laws and regulations of mining of DIN standards, and VDI guidelines, of generally accepted rules of engineering as well as of certified findings of industrial science as minimum requirements. This definition is followed by the examination of the type of medium-term development to be expected in the bituminous coal mining industry of the Ruhrkohle AG up to the year 1985. Then the general aims 1 and 2 given in volume No. 7 are described in detail. These descriptions constitute an excellent summary of the present state of knowledge concerning the improvement of working conditions in the bituminous coal mining industry. Finally, a study on the transferability of research findings is given. One statement is of special importance, i.e., that transferability is not characterized by technological feasibility alone which depends to a high degree on marginal, organizational conditions within the company, e.g., on the information system, on its hierarchical structure, on the company's policy, and on departamental policy. In this study, only the technological transferability is examined. To enable us to assess it, appropriate statements are made in a brief description of the research project carried out since 1974, which was sponsored within the action programme ''Humanization of Industrial Life''.

  2. Advanced coal-fueled industrial cogeneration gas turbine system. Annual report, June 1990--June 1991

    Energy Technology Data Exchange (ETDEWEB)

    LeCren, R.T.; Cowell, L.H.; Galica, M.A.; Stephenson, M.D.; Wen, C.S.

    1991-07-01

    Advances in coal-fueled gas turbine technology over the past few years, together with recent DOE-METC sponsored studies, have served to provide new optimism that the problems demonstrated in the past can be economically resolved and that the coal-fueled gas turbine can ultimately be the preferred system in appropriate market application sectors. The objective of the Solar/METC program is to prove the technical, economic, and environmental feasibility of a coal-fired gas turbine for cogeneration applications through tests of a Centaur Type H engine system operated on coal fuel throughout the engine design operating range. The five-year program consists of three phases, namely: (1) system description; (2) component development; (3) prototype system verification. A successful conclusion to the program will initiate a continuation of the commercialization plan through extended field demonstration runs.

  3. Update on the modernization of 200 MW hard coal power plants in Poland

    International Nuclear Information System (INIS)

    Szabo, T.E.; Kopec, M.

    1993-01-01

    In June 1990, the Coalition of 200 MW, Hard Coal, Polish Power Plants representing an installed base of 10,240 MW, including 45 units of 200 MW, signed an agreement with the Westinghouse Electric Corporation, Power Generation Business Unit, based in Orlando, Florida, to cooperate on developing a modernization program for the 200 MW units. Program funding was obtained with The United States Trade Development Program (TDP) providing approximately 2/3 of the cost, and the balance provided by Westinghouse. On March 5, 1992, the Polish-American (51% Westinghouse, 49% Seven (7) Hard Coal Power Plants), Joint Venture Company, MODELPOL, Ltd. (Polish acronym for 'MODernizacja ELektrowni POLskich' or Modernization of Polish Power Plants) was established with the goal to implement not only technically but financially the recommendations of the Modernization Study. The mission given MODELPOL, Ltd. by their Polish-American Shareholders was to: develop the specific modernization programs for each hard coal power plant; assist in identifying and obtaining the financial resources required for implementation; and provide technological preventative maintenance services to improve unit availability. Within these aims was the target to reduce SO 2 , and particulate emissions. The first program is taking place at the Laziska Power Plant, followed by Rybnik. Further projects are in the planning stages. Finance is a constant problem, this should be eased by the restructuring of the power industry. Future programmes include connection to the European Community Power Grid. 5 figs

  4. The modernization potential of gas turbines in the coal-fired power industry thermal and economic effectiveness

    CERN Document Server

    Bartnik, Ryszard

    2013-01-01

    The opportunity of repowering the existing condensing power stations by means of  gas turbogenerators offers an important opportunity to considerably improvement of their energy efficiency. The Modernization Potential of Gas turbines in the Coal-Fired Power Industry presents the methodology, calculation procedures and tools used to support enterprise planning for adapting power stations to dual-fuel gas-steam combined-cycle technologies. Both the conceptual and practical aspects of the conversion of existing coal-fired power plants is covered. Discussions of the feasibility, advantages and disadvantages and possible methods are supported by chapters presenting equations of energy efficiency for the conditions of repowering a power unit by installing a gas turbogenerator in a parallel system and the results of technical calculations involving the selection heating structures of heat recovery steam generators. A methodology for analyzing thermodynamic and economic effectiveness for the selection of a structure...

  5. Quantitative applications of gamma densitometry in the coal industry: a critique

    International Nuclear Information System (INIS)

    Shea, P.; Sher, R.; Gozani, T.

    1982-01-01

    This paper discusses the use of gamma densitometry to quantitatively assay bulk samples of coal on a continuous basis. Devices using these principles to determine mass flows are on the market, and work is progressing in several countries on instruments to determine ash content. The theoretical limits of applicability and inherent assumptions of these techniques are discussed, primarily as applied to dry bulk coal, but with some discussion of the more complicated problems of slurried coal. Gamma rays are generated by sources, usually a single radioactive element. These have several advantages over XRF, the main one being that no power is required to generate gammas. However, there are a limited number of gamma sources with useful energies, long enough half-lives to be economically useful, and clean spectra (that is, relatively few energies emitted by the source in question). Gamma densitometry measurements by single and multiple-energy transmission and backscatter measurements are discussed. A general formalism for analyzing multiple-energy systems is presented. While multi-energy systems can, in principle, pick out as many groups of elements as energies used, the matrices involved are ill-conditioned and thus require accurate measures of count rate (i.e., long counting times or high source intensities) to achieve acceptable errors. Changes in coal composition and profile of coal on a belt were also seen to be important sources of error. Transmission measurements are more amenable to analysis than backscatter, which are essentially transmission measurements made on a distributed source. In addition, transmission measurements are not restricted to low energy gamma sources, and can survey the entire bulk of coal rather than just the upper portion. The special problems of slurried coal measurements are briefly discussed

  6. The prospects of hard and brown coal in Poland and in the European Union

    Energy Technology Data Exchange (ETDEWEB)

    Gawlik, Lidia; Majchrzak, Henryk; Mokrzycki, Eugeniusz; Uliasz-Bochenczyk, Alicja

    2010-09-15

    Poland possess significant reserves of hard and brown coal and is an important producer of these fuels, for that reason coal has a dominant position in Polish energy balance. The government document describing energy policy of Poland up to the year 2030 treats Polish coal as an stabilizer of national energy safety. The progress in clean coal technologies development is a key element to determine the role of Polish coal both in Polish and EU economy. The possibilities of prospective use of coal pointing at the main direction of clean technology development has also been discussed in the paper.

  7. CHANGES IN THE STRUCTURE OF COAL AND STEEL INDUSTRIES UNDER THE ECSC (1952-1967: WAS WEST GERMANY KEPT “SMALL”?

    Directory of Open Access Journals (Sweden)

    Eline Poelmans

    2012-01-01

    Full Text Available In 1951, six European countries founded the European Coal and Steel Community (ECSC, which they hoped would be a first step towards more European integration and which they hoped would provide a common legal framework for their coal and steel industries. The main aim of the ECSC was to make sure that the German coal and steel industries would never again reach their prewar capacities, which according to many had played a part in the coming of World War II. Another important aim was to forestall any attempt of the USSR to conquer West Germany. This article constitutes a case study of the regional concentration of the coal and steel industries in the six ECSC countries, and it investigates whether the importance of certain coal and steel producing regions within the ECSC changed between 1952 and 1967. Furthermore, an analysis is conducted of how the concentration ratios of the ECSC's industries differed among the six countries, whether these differences changed over time, how this influenced the size and number of coal and steel firms and whether the ECSC succeeded in its initial aim of keeping West Germany small.

  8. Portable rapid gas content measurement - an opportunity for a step change in the coal industry?

    International Nuclear Information System (INIS)

    Beamish, Basil; Kizil, Mehmet; Gu, Ming

    2013-01-01

    The last major advance in gas content measurement for coal seams was the introduction of the quick crush technique in the early 1990s. This is a laboratory test method that has proven very reliable over the years. Recent laboratory testing using a portable quick crushing device, known as the portable gas content analyser, has produced consistent gas content results for a set of core samples obtained from a single borehole that intersected four coal seams. The retained gas content values obtained for the seams show the same increasing gas content pattern and gas composition change with depth as the standard quick crush technique. Use of the portable gas content analyser provides the opportunity to produce rapid, reliable gas content measurement of coal that could be developed for assessing gas compliance cores and outburst-prone conditions at a mine site.

  9. REKUL'TIVATSIYA NARUSHENNYKH ZEMEL' V UGOL'NOY PROMYSHLENNOSTI [RECLAMATION OF DISTURBED LANDS IN THE COAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Harionovskij A.A.

    2017-09-01

    Full Text Available The urgency of the issue of reclamation of disturbed lands is due to the fact that coal mining by both open and underground methods is inevitably accompanied by exclusion from economic circulation and violation of lands for various purposes, by changing the terrain and forming an industrial landscape. The article contains information on the volumes of disturbance and reclamation of lands in the coal industry In the article the directions of reclamation and applied technologies, domestic developments and foreign experience are considered. It was noted that the priority areas for reclamation of disturbed lands in the coal industry are: agricultural, forestry and sanitary-hygienic. It is noted that the quality of the recultivated areas is not always at the proper level, which creates dif culties in their subsequent use. The main reasons for the low quality of reclamation are the lack of the necessary amount of initial data on the composition and properties of soil and rock mass of the dumps at the development stage of the reclamation projects, the lack of special technical means for performing remediation works at a high level, the lack of a landscape approach to the restoration of disturbed areas. Measures to prevent spontaneous combustion of rock dumps are laid in projects and are not implemented in practice in full, which leads to the occurrence of res. Two new developments in the eld of reclamation are presented: the microbiological method developed by MNIIECO TEK JSC, and the method for restoring the biological productivity of disturbed lands, proposed by the Scienti c Research Institute of Agricultural Problems of Khakassia SB RAAS. Identi ed problem issues in the eld of reclamation and a list of measures to improve the state of protection of land resources. In the article it is shown that in order to improve the state in the sphere of land resources protection in the coal industry, it is necessary to improve the applied mining technologies

  10. Environmental impact of coal industry and thermal power plants in India.

    Science.gov (United States)

    Mishra, U C

    2004-01-01

    Coal is the only natural resource and fossil fuel available in abundance in India. Consequently, it is used widely as a thermal energy source and also as fuel for thermal power plants producing electricity. India has about 90,000 MW installed capacity for electricity generation, of which more than 70% is produced by coal-based thermal power plants. Hydro-electricity contributes about 25%, and the remaining is mostly from nuclear power plants (NPPs). The problems associated with the use of coal are low calorific value and very high ash content. The ash content is as high as 55-60%, with an average value of about 35-40%. Further, most of the coal is located in the eastern parts of the country and requires transportation over long distances, mostly by trains, which run on diesel. About 70% oil is imported and is a big drain on India's hard currency. In the foreseeable future, there is no other option likely to be available, as the nuclear power programme envisages installing 20,000 MWe by the year 2020, when it will still be around 5% of the installed capacity. Hence, attempts are being made to reduce the adverse environmental and ecological impact of coal-fired power plants. The installed electricity generating capacity has to increase very rapidly (at present around 8-10% per annum), as India has one of the lowest per capita electricity consumptions. Therefore, the problems for the future are formidable from ecological, radio-ecological and pollution viewpoints. A similar situation exists in many developing countries of the region, including the People's Republic of China, where coal is used extensively. The paper highlights some of these problems with the data generated in the author's laboratory and gives a brief description of the solutions being attempted. The extent of global warming in this century will be determined by how developing countries like India manage their energy generation plans. Some of the recommendations have been implemented for new plants

  11. Primary Rock Temperature Fields in Czech and Polish Part of the Upper of the Upper Silesian Coal Basin / Pole temperatury pierwotnej skał w czeskiej i polskiej części górnośląskiego okręgu węglowego

    Science.gov (United States)

    Doležal, Libor; Knechtel, Józef; Taufer, Antonín; Trávníček, Ludvík

    2013-03-01

    Knowledge of the temperature of rock mass is no doubt of substantial meaning, both for the solution of economicaly demanding protection of mine workers in difficult microclimatic environment and for perspective usage of geothermal energy from the depth of the earth. International cooperation of our and Polish specialists is in this sense more than welcome, also because the exploitation of coal seams takes place in the same Upper Silesia rock coal basin. This profesional article is concentrated on complex analysis of temperature fields of the Ostrava- Karviná district, mainly from results of thermologging measurements in geological survey boreholes both on surface and underground, and also from the actual temperature measurements in the coal mines. One chapter of this article describes the original approach to the survey of temperature field and its prognosis in the Polish part of the Upper Silesia coal basin by a researcher from GIG Katowice. The most suitable method of analysis of primary temperature field seemed the preparation of isocurves of temperature(isothermal lines) for the existing mine working areas, even if the method of obtaining them was different. The Czech method is based on determination of the quantitative dependence of temperature on the rock mass depth from the abovementioned measurement results, calculation of geothermal gradients and the following recalculation of real temperature values for various depth levels. Then isothermal lines for these depth levels are created together with colour distingushing of their value limits. The Polish method is sufficiently described in a dedicated chapter. The conclusion of the article underlines the decisive role of the structuraly tectonic composition of the rock mass on the temperature field in the long term thermic evolution of the Earth.

  12. Coal - 96

    International Nuclear Information System (INIS)

    Sparre, C.

    1996-09-01

    The report deals mainly with coal consumption, but also gives some information about technology, environmental aspects and markets. Data have been collected by questionnaires or via telephone. The use of steam coal for heating was 0.8 Mtons (down 20% from 1994). Cogeneration plants were the main users. Taxes and environmental reasons cause a reduction of the coal use that will probably continue the next years. Use of steam coal in industry has been constant at a level of 0.7 Mtons. The import of metallurgical coal rests constant at a level of 1.6 Mtons. 1.2 Mtons of coke was produced, and 0.3 Mtons imported. The PFBC-plant at Vaertan, Stockholm used 0.13 Mtons of coal, while some coal fired power plants have been converted to peat and wood fuels. The average price of steam coal imported to Sweden in 1995 was 333 SEK/ton, 6% higher than in 1994. The contract prices for delivery 1996 are about the same as at the end of 1995. All cogeneration plants have some sort of SO 2 removal system, mostly wet-dry. The largest plant, at Vaesteraas, has recently invested in a SCR system for NO x removal. Most other plants are using low NO x burners or SNCR systems, based on ammonia or urea, which reduce the emissions 50 - 70%. Some statistic about the world coal market is also given in the report

  13. Industrial monument and symbol of a new beginning. Coal scrubber on mine Zollverein; Industriedenkmal und Symbol eines Neubeginns. Die Kohlenwaesche auf Zeche Zollverein

    Energy Technology Data Exchange (ETDEWEB)

    Seht, Bernd von; Schneider, Helmut; Ferrarini, Dario [Ingenieurbuero Wetzel und von Seht, Hamburg (Germany)

    2008-09-15

    The former coal mine ''Zollverein'' has been accepted in the UNESCO World Heritage List, which proves its status as an outstanding monument of industrial culture in the Ruhr region. Currently, the buildings are being converted into a culture and design forum of international renown. The coal scrubber building of Schacht XII is presented as an example to show how the conflicting goals of conservation and transformation can be integrated in consideration of current standards for supporting structures. (orig.)

  14. The occupational and environmental status of Polish industry: a comparative study of the private and public sectors.

    Science.gov (United States)

    Broszkiewicz, Roman; Brown, Halina Szejnwald; Hibner, Zofia

    2002-01-01

    During the last decade, Poland has made a successful transition toward democracy and market economy. Since the mid-1990s, we have studied the reforms in the environmental and occupational protection system in Poland, focusing on the privately owned firms. We found that considerable progress has taken place, especially in increasing the accountability of private employers and in improved enforcement. The fundamental legitimacy of regulators and the regulatory process, and the capacity for case-specific decision-making, are among the key explanatory factors. The case-specific implementation in Poland is consistent with models advocated by several authors in relation to other industrialized European economies. We attribute these developments in Poland to the continuity of institutions, and the generally good "fit" between the policies and institutions on one hand, and their social context on the other, including a wide sharing of certain values and norms. The outstanding question from our previous work has been the fate of state-owned firms, which may be facing different issues than the privatized ones, both in terms of economics, organizational culture, and relationships with the regulatory authorities. In this article, we report the results of a comparison between the private and state-owned firms, based on the questionnaire surveys of the two sectors. We find a striking similarity in performance of both sectors and in the authorities' attitudes toward both. These findings support our earlier proposition that Poland's success in instituting an effective occupational protection system is deeply embedded in the attitudes toward protecting workers' health and safety and toward balancing competing societal objectives. These attitudes have not changed during the transition to the market economy.

  15. New Environmental Practices in Polish Production Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    2002-01-01

    Based on five case studies in Poland, the paper discusses, how a specific environmental policy influences the firms? industrial environmental practices. The study illustrates, how the Polish environmental policy, dominated by environmental charges on emissions, is extremely effective in improving...

  16. The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

    Directory of Open Access Journals (Sweden)

    Robyn Considine

    Full Text Available Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics.A cross-sectional study was conducted among employees (n = 1457 across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements. Participants completed measures of psychological distress (K10+ and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics.Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems.This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The

  17. The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

    Science.gov (United States)

    Considine, Robyn; Tynan, Ross; James, Carole; Wiggers, John; Lewin, Terry; Inder, Kerry; Perkins, David; Handley, Tonelle; Kelly, Brian

    2017-01-01

    Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining) has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics. A cross-sectional study was conducted among employees (n = 1457) across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements). Participants completed measures of psychological distress (K10+) and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics). Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers) and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems. This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The findings

  18. Feasibility study of environmentally friendly type coal utilization systems. Feasibility study of environmentally friendly type coal utilization systems in sectors except the coal industry in China; Kankyo chowagata sekitan riyo system kanosei chosa. Chugoku no sekitan kogyo igai no bumon ni okeru kankyo chowagata sekitan riyo system kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    For the purpose of working out a comprehensive master plan for application of the coal utilization system, the paper surveyed and studied the coal utilization system in terms of environmental measures and efficiency improvement in the utilization of coal. As a result of the discussion with NEDO and the National Planning Committee of China, Liaoning Province (the whole China) and Shenyang City were selected as a model area and a model city for the survey and study. As energy conservation measures taken in the former, desirable are intensifying/capacity-increase of boilers, kilns, etc. and adoption of new-type/high-efficient equipment. Also expected are reinforcement of combustion control and improvement of efficiency by using coal preparation, industrial use coal briquette, etc. Measures taken in the latter are the same as those taken in the whole China. As SOx reduction measures for Liaoning Province, desirable is installation of dry-type desulfurization equipment and simple desulfurization equipment. As dust prevention measures for it, desirable is installation of electrostatic precipitators or high-functional bag filters. SOx reduction measures for Shenyang City are the same as those taken in the whole China. SOx can be reduced by using coal-prepared low-sulfur coal and industrial use coal briquette added with desulfurizing agent. 88 figs., 163 tabs.

  19. Using MSD prevention for cultural change in mining: Queensland Government/Anglo Coal Industry partnership.

    Science.gov (United States)

    Tilbury, Trudy; Sanderson, Liz

    2012-01-01

    Queensland Mining has a strong focus on safety performance, but risk management of health, including Musculoskeletal Disorders (MSDs) continues to have a lower priority. The reliance on individual screening of workers and lower level approaches such as manual handling training is part of the coal mining 'culture'. Initiatives such as the New South Wales and Queensland Mining joint project to develop good practice guidance for mining has allowed for a more consistent message on participatory ergonomics and prevention of MSD. An evidence based practice approach, including the introduction of participatory ergonomics and safe design principles, was proposed to Anglo American Coal operations in Queensland. The project consisted of a skills analysis of current health personnel, design of a facilitated participatory ergonomics training program, site visits to identify good practice and champions, and a graduated mentoring program for health personnel. Early results demonstrate a number of sites are benefiting from site taskforces with a focus on positive performance outcomes.

  20. Environmental Impact of Restructuring of the Coal Industry in the Rostov Region

    Directory of Open Access Journals (Sweden)

    Irina A. Zhukova

    2016-12-01

    Full Text Available Negative anthropogenesis impact on environment is now felt especially sharply and gains global character. One of the most large-scale subjects of the economic environment doing harm to environment are the enterprises of an coal complex as they in large volumes throw out the polluting substances and in high volumes take natural resources. However the field of activity of such enterprises is a priority for national economy, and difficult interchangeability of energy raw material resources demands from the state and the coal enterprises of development within realization of complete branch ecological-economic policy of the economic mechanism of stimulation of ecologically sustainable development of the coal complex. In the conditions of an economic crisis, threat of world recession and external economic pressure upon the forefront there are two priority economic tasks: maintaining economic and social stability and promote economic growth of the Russian economy and its regions. Along with attempts to stabilize the preserved and newly opened businesses, and really putting their place in the market economy, it is necessary to overcome the whole complex of socio-economic and environmental impacts of restructuring. The neutralization of the negative environmental impact of the closure of coal enterprises, as well as warning of emerging environmental hazards require large material costs. To reduce costs requires a comprehensive, scientifically sound approach to solving this global problem. Significant reserve to reduce the negative impact of ecological consequences of liquidation of mines on the environment is the task of the use of related natural resources, which are currently the sources of pollution of the biosphere.

  1. Industrial and utility applications coal-oil mixture data index. [Oil-fired systems

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-05-01

    The seriousness of the present and projected national energy picture dictated the adoption of several approaches by the Department of Energy (DOE) to develop alternate fuel sources as a means of curtailing our present dependence on imported oil. One approach, which offers near term potential for reducing the domestic consumption rate of natural gas and oil, is the application of coal-oil mixture (COM) combustion technology. The idea of burning coal and oil in the form of a mixture has been around for some time and is not viewed by DOE, in any degree, as the solution to our domestic energy problem. However, it is viewed as a near-term retrofit coal utilization technology with a high degree of application potential to existing oil fired systems. In view of this, DOE has undertaken several demonstration and support-research projects to further define existing COM technical uncertainties. The purpose of this manual is to present a comprehensive technical description and status of each project, both informative and practical with respect to the diverse data requirements.

  2. Modified coal fly ash as low cost adsorbent for removal reactive dyes from batik industry

    Directory of Open Access Journals (Sweden)

    Taufiq Agus

    2018-01-01

    Full Text Available The removal of reactive dyes on modified coal fly ash has been investigated during a series of batch adsorption experiments. Physical characteristics of modified coal fly ash was characterized by Brunauer Emmett Teller (BET surface area analysis, X-ray powder diffraction (XRD, Fourier transform infrared spectrophotometer (FT-IR, and scanning electron microscope (SEM. The effects of operational parameters such as initial dye concentration (50–200 mg/L, solution pH (4–10 and adsorbent dosage (50–200 mg/L were studied. The adsorption experiments indicated that modified coal fly ash was effective in removing of Remazol Blue. The percentage removal of dyes increased while the modified fly ash dosage increased. The percentage removal of dyes increased with decreased initial concentration of the dye and also increased with amount of adsorbent used. The optimum of removal of dyes was found to be 94% at initial dye concentration 50 g/mL, modified fly ash dosage 250 g/mL, and pH of 2.0.

  3. Efficient polishing of aspheric optics

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, J.S.; Piscotty, M.A.; Nguyen, N.Q.; Landram, C.S.; Ng, L.C.

    1997-04-15

    The objectives of this project are to develop, evaluate, and optimize novel designs for a polishing tool intended for ultra-precise figure corrections on aspheric optics with tolerances typical of those required for use in extreme ultraviolet (EUV) projection lithography. This work may lead to an enhanced US industrial capability for producing optics for EUV, x-ray and, other high precision applications. LLNL benefits from developments in computer-controlled polishing and the insertion of fluid mechanics modeling into the precision manufacturing area. Our accomplishments include the numerical estimation of the hydrodynamic shear stress distribution for a new polishing tool that directs and controls the interaction of an abrasive slurry with an optical surface. A key milestone is in establishing a correlation between the shear stress predicted using our fluid mechanics model and the observed removal footprint created by a prototype tool. In addition, we demonstrate the ability to remove 25 nm layers of optical glass in a manner qualitatively similar to macroscopic milling operations using a numerically- controlled machine tool. Other accomplishments include the development of computer control software for directing the polishing tool and the construction of a polishing testbed.

  4. Strategies for sustainable development of the Polish electric power system

    International Nuclear Information System (INIS)

    Janiczek, R.

    1996-01-01

    The key features of sustainable development of the Polish electric power industry are discussed. Priorities and limitations for changes and power demand forecasts are described. Results of least-cost planning for existing power plants' modernization and generation expansion with environmental impacts are presented. The least-cost strategy is given by the optimal upgrades of older plants until year 2002 and by expansion of gas-fired units. The limited availability of gas after 2010 will lead to the construction of new coal-fired plants. For the next planning process, an integrated resource planning methodology is proposed, which includes dynamic optimization of supply and demand side options. Innovative mechanisms are shown to overcome barriers of development like long-terms contracts and decentralization of the power system planning process. (author)

  5. Testing the electrostatic characteristics of polypropylene fabric with metallic yarns, intended for use in coal mines threatened by the explosion hazard. Part 2: Tests in coal mine

    International Nuclear Information System (INIS)

    Talarek, M; Orzech, L

    2011-01-01

    The aim of this paper was to assess the electrostatic safety of polypropylene fabric with metallic yarns intended for use in coal mines. Such fabrics have not been used in the Polish mining industry yet. The tests conducted have been divided into two subgroups: laboratory tests and tests in a coal mine. This paper presents the results of tests in a coal mine, where we have focused on the resistance-to-ground in some specific situations. Bags made of fabric at the roadway face were tested, as well as the roll of fabric during transport and carried by a miner. The results obtained allow the reliable assessment of the risk of using fabrics with metallic yarns in the explosive atmosphere which often occurs in coal mines.

  6. Coal supply/demand, 1980 to 2000. Task 3. Resource applications industrialization system data base. Final review draft. [USA; forecasting 1980 to 2000; sector and regional analysis

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, W.M.; Hasson, V.

    1980-10-10

    This report is a compilation of data and forecasts resulting from an analysis of the coal market and the factors influencing supply and demand. The analyses performed for the forecasts were made on an end-use-sector basis. The sectors analyzed are electric utility, industry demand for steam coal, industry demand for metallurgical coal, residential/commercial, coal demand for synfuel production, and exports. The purpose is to provide coal production and consumption forecasts that can be used to perform detailed, railroad company-specific coal transportation analyses. To make the data applicable for the subsequent transportation analyses, the forecasts have been made for each end-use sector on a regional basis. The supply regions are: Appalachia, East Interior, West Interior and Gulf, Northern Great Plains, and Mountain. The demand regions are the same as the nine Census Bureau regions. Coal production and consumption in the United States are projected to increase dramatically in the next 20 years due to increasing requirements for energy and the unavailability of other sources of energy to supply a substantial portion of this increase. Coal comprises 85 percent of the US recoverable fossil energy reserves and could be mined to supply the increasing energy demands of the US. The NTPSC study found that the additional traffic demands by 1985 may be met by the railways by the way of improved signalization, shorter block sections, centralized traffic control, and other modernization methods without providing for heavy line capacity works. But by 2000 the incremental traffic on some of the major corridors was projected to increase very significantly and is likely to call for special line capacity works involving heavy investment.

  7. Material removal mechanisms in abrasive vibration polishing of complex molds

    Science.gov (United States)

    Brinksmeier, E.; Riemer, O.; Schulte, H.

    2010-10-01

    Optical and medical industries are demanding a large variety of optical elements exhibiting complex geometries and multitude opto-functional areas in the range of a few millimeters [1]. Therefore, mold inserts made of steel or carbides must be finished by polishing for the replication of glass and plastic lenses [2]. For polishing theses complex components in the shape of localized cavities or grooves the application of rotating polishing pads is very limited. Established polishing processes are not applicable, so state of the art is a time consuming and therefore expensive polishing procedures by hand. An automated process with conventional polishing machines is impossible because of the complex mold insert geometry. The authors will present the development of a new abrasive polishing process for finishing these complex mold geometries to optical quality. The necessary relative velocity in the contact area between polishing pad and workpiece surface is exclusively realized by vibration motions which is an advantage over vibration assisted rotating polishing processes. The absence of rotation of the pad opens up the possibility to machine new types of surface geometries. The specific influence factors of vibration polishing were analyzed and will be presented. The determination of material removal behavior and polishing effect on planar steel samples has shown that the conventional abrasive polishing hypothesis of Preston is applicable to the novel vibration polishing process. No overlaid chemical material removal appears.

  8. THE DASHBOARD - STRATEGIC MANAGEMENT TOOL OF ACTIVITIES IN THE COAL MINING INDUSTRY

    Directory of Open Access Journals (Sweden)

    DINA IONELA-CLAUDIA

    2014-02-01

    Full Text Available In order to achieve the objectives at all levels and categories of functions in the unit, use multiple information systems, including the dashboard which is one of the management tools that responds very well to the rationale and supporting data of management decisions complementary to those provided by other media. In this respect, we try to calculate indicators organization currently working compartments of the coal mining units and will propose a series of indicators whose calculation we consider would be necessary for a detailed presentation as activity carried out and the improvement of management.

  9. Metal polish poisoning

    Science.gov (United States)

    Metal polishes are used to clean metals, including brass, copper, or silver. This article discusses the harmful effects from swallowing metal polish. This article is for information only. DO NOT use ...

  10. Williamson Polishing & Plating Site

    Science.gov (United States)

    Williamson Polishing & Plating Co. Inc. was a plating shop located in the Martindale-Brightwood neighborhood of Indianapolis. The facility conducted job shop polishing and electroplating services. The vacant site contains a 14,651-square-foot building.

  11. Coal combustion technology in China

    International Nuclear Information System (INIS)

    Huang, Z.X.

    1994-01-01

    Coal is the most important energy source in China, the environmental pollution problem derived from coal burning is rather serious in China. The present author discusses coal burning technologies both in boilers and industrial furnaces and their relations with environmental protection problems in China. The technological situations of Circulating Fluidized Bed Coal Combustor, Pulverized Coal Combustor with Aerodynamic Flame Holder and Coal Water Slurry Combustion have been discussed here as some of the interesting problems in China only. (author). 3 refs

  12. Coal export facilitation

    International Nuclear Information System (INIS)

    Eeles, L.

    1998-01-01

    There is a wide range of trade barriers, particularly tariffs, in current and potential coal market. Commonwealth departments in Australia play a crucial role in supporting government industry policies. This article summarises some of more recent activities of the Department of Primary Industries and Energy (DPIE) in facilitating the export of Australian Coals. Coal export facilitation activities are designed to assist the Australian coal industry by directing Commonwealth Government resources towards issues which would be inappropriate or difficult for the industry to address itself

  13. The Government’s Policy in the Field of Hard Coal Mining Restructuration as an Element of Poland’s Energy Security

    Directory of Open Access Journals (Sweden)

    Małgorzata Kamola-Cieślik

    2017-12-01

    Full Text Available Coal is the primary energy source affecting Poland’s energy security. It is because deposits of this raw material are available in Poland. Unlike natural gas or oil reserves, which are limited in the country. The high cost of extracting Polish coal in comparison with coal prices on the world market has made it necessary to adopt Polish mining to functioning in market economy conditions. The paper presents the evolution of Polish government policy towards the activity of coal mines in the years 1990–2015. This article aims to present government policy on restructuring coal mining after 2015 and showing its effects. The stages of consolidation of the power industry with the mining industry are shown. The above issues are presented in the context of the European Union’s energy and climate policy, paying particular attention to the share of renewable energy sources in the energy and fuel balance and the reduction of carbon dioxide emissions into the atmosphere.

  14. Undermining capitalism - state ownership and the dialectic of control in the British coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Krieger, J.

    1983-01-01

    The first section of this publication considers state ownership and contradictions of bureaucratic management with regard to the National Coal Board (NCB). Wages policy is discussed in terms of national rationalization, in particular the 1966 National Power Loading Agreement (NPLA). The second section outlines the effects of wage policy and structure upon production and also assesses the effects of work rules which determine organization of labour, division of tasks, norms for co-operation between team and shift groups etc. The third section discusses changes in power and labour relations and demonstrates distinctive regional patterns in the politics of productivity under piece-rate and time-based wage structures. Subsequent sections comprise colliery studies in County Durham and Nottinghamshire. The concluding chapter summarizes the arguments put forward in the preceding sections and discusses the relationship between organizational structure and class power.

  15. REGIONAL DEVELOPMENT WITHIN THE RUHR DISTRICT – FROM THE FORMALLY CENTRE OF THE COAL AND STEAL INDUSTRY TO A CENTRE OF TERTIARY SERVICES

    Directory of Open Access Journals (Sweden)

    Dieter Anhuf

    2008-09-01

    Full Text Available Regional development within the Ruhr district – from the formally centre of the coal and steel industry to a centre of tertiary services. The Ruhrgebiet (Ruhr district is an urban agglomeration in the western part of Germany with a population of approximately 5.3 Million, covering an area of 4.435 km². It’s part of the metropolitan area of Rhine-Ruhr with more than 10 Million inhabitants living in an area of about 10.000 km².The black coal resources, deposited during the carboniferous area form the natural backbone for the development of the largest region of coal, iron, and steel industry in Europe. The economy of the Ruhrgebiet was unidirectional dominated for more than 150 years by four heavy industry sectors, black coal, steel, chemical industry and energy production. But later, when petroleum and natural gas and cheaper imported black coal conquered the German market and, as well, steel could be produced at a reduced rate elsewhere in the world the booming producing industry quasi collapsed. Thus, the Region is characterized by an above average unemployment since the mid 70ies. More than 50% of the 1 Million jobs in the region were lost, while only 300.000 new jobs could be added within the service sector between 1980 and 2002. The economic and social structural change within the Ruhr district is primarily based on the expansion of services like advertisement, science, development, transport logistics, consulting, and design. But also the cultural and tourist branches are characterized by growing figures. The BIP, produced within the Ruhrgebiet, is about 26% of the BIP of North-Rhine-Westphalia or 6% of Germany’s BIP. In comparison, the metropolitan area of São Paulo produces 17% of the national BIP of Brazil.

  16. Sulfidic vapor phase catalysts, especially tungsten sulfide, in industrial coal hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Pier, M.

    1943-01-01

    The historical development of high-pressure processes of the I. G. Farbenindustrie, from ammonia through methanol and gasoline, and the special case of gasoline production with a fixed-bed catalyst (tungsten sulfide) were discussed. The preparation, properties, and uses of this versatile catalyst were discussed, but it was emphasized that with the sotrmy development of the process, a condition which still existed at the time of this report, and with a great number of practical problems to solve, no extensive study of basic facts had ben possible. This tungsten sulfide catalyst was an especially active vapor-phase catalyst which operated at lower temperatures than the molybdenum catalysts formerly used. It also permitted higher thruputs, even with the oils from bituminous coal that were difficult to split. For certain uses, such as the improvement of the antiknock properties or the saving in tungsten, it was strongly diluted. Studies on using up sulfur in the tungsten sulfide catalyst were in progress at this time and showed there was practically no reduction of it under the conditions of hydrogenation under pressure as long as the raw material contained sulfur.

  17. Ventilation air methane destruction - the new challenge to the underground coal mining industry

    International Nuclear Information System (INIS)

    Clarke, Michael; Seddon, Duncan

    2012-01-01

    With the advent of 'Carbon Taxes' the carbon footprint of coal has become an economic as well as an environmental issue and the emission of methane in mine out- bye air as ventilation air methane (VAM) is a pending liability. As well as being economic and environmental concerns, VAM and VAM management have safety, social licence and operational factors that must also be addressed. The need to mitigate (oxidise) methane to produce carbon dioxide and water vapour (VAM destruction) and thus lower the Greenhouse footprint is coming to be seen as a necessary mining activity. However, there are several key issues to be addressed with present technology using high temperature (1000°C) thermal oxidisers. Emerging technology may involve a catalytic approach. This technology aims to lower the oxidation temperature and produce a more efficient combustion process. Several systems (based on both precious metals and transition metals) have been shown to operate below 400°C. An ultimate solution would be oxidation at ambient temperature, which is clearly demonstrated by the enzyme methane mono-oxygenase (MMO) which oxidises methane to methanol. However, the rate of oxidation at ambient temperature is too low and the structure of the bio-reactors required would be very large. The challenge is to marry the natural oxidation with modern catalytic approaches and achieve high rates of methane oxidation, in compact equipment, well below the methane auto-ignition temperature.

  18. STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

    Directory of Open Access Journals (Sweden)

    François GOOSSENS

    2015-05-01

    Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

  19. Technological Advances of Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

    The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components r...

  20. Research of composite fuels thermophysical properties based on low-grade coals with addition of fine sawdust and flour industry wastes

    Directory of Open Access Journals (Sweden)

    Yankovsky Stanislav

    2017-01-01

    Full Text Available Experimental studies have been carried out to determine the energy and technical characteristics of composite fuels from coal grade 3B (Balakhtinskoye deposit, fine waste and flour from the milling industry. An effective concentration of 50% / 50% composite fuel has been established without the addition of a flour component, in which the combustion heat is reduced by less than 8%, with the flour component added up to 15%, the heat of combustion further decreases less than 2% of the heat of combustion of homogeneous coal. At the same time, the ash content is reduced to 11%, the yield of volatile components remains at the concentration level of the composite fuel of coal and wood. It is established that this component composition of three types of fuel is suitable for the formation of fuel briquettes suitable for burning in furnaces of small power boilers.

  1. Coal 95

    International Nuclear Information System (INIS)

    Sparre, C.

    1995-01-01

    The report deals with the use of coal and coke in Sweden during 1994. Some information about technology, environmental questions and markets are also given. Data have been collected by questionnaires to major users and by telephone to minor users. Preliminary statistical data from Statistics Sweden have also been used.The use of steam coal for heating purposes has been unchanged during 1994 at a level of 1 Mtons. The production in the cogeneration plants has been constant, but has increased for electricity production. The minor plants have increased their use of forest fuels. The use of steam coal will probably go down in the next years both for heat and cogeneration plants. During the top year 1987 coal was used in 18 hot water and 11 cogeneration plants. 1994 these figures are 3 and 12. Taxes and environmental reasons explain this trend. The use of steam coal in industry has been constant at the level 0.7 Mtons. The import of metallurgical coal in 1993 was 1.6 Mtons, like 1992. Import of 0.3 Mtons of coke gives the total consumption of coke in industry as 1.5 Mtons. the average price of steam coal imported to Sweden was 317 SEK/ton, 3% higher than 1993. All Swedish plants meet their emission limit of dust, SO 2 and NO x as given by county administrations or concession boards. The cogeneration plants all have some SO 2 removal system. The biggest cogeneration plant (Vaesteraas) has recently invested in a SCR NO x cleaning system. Most other plants use low NO x burners or SNR injection systems based on ammonia or urea. 2 figs, 13 tabs

  2. Utilization of coal rejects and coal washery tailings in Yong Rong Power Plant

    International Nuclear Information System (INIS)

    Tao, T.; Kefa, C.; Mingjiang, N.; Guoguan, H.; Yong, C.; Xiang, Z.

    1991-01-01

    The coal rejects and coal washery tailings discharged by coal washery not only occupies farmland but also causes environmental pollution. With the development of coal industry, the problem becomes more serious. In this paper, the properties of coal rejects and coal washery tailings are analyzed. The technology that burn coal rejects and coal washery tailings in boilers to produce electric power is reported. It has been shown the technology is feasible and successful. It saves energy as well as protects the environment

  3. Polish energy-system modernisation

    International Nuclear Information System (INIS)

    Drozdz, M.

    2003-01-01

    The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

  4. Factors contributing to industrial accidents during coal mining operations. [Bulgaria: 1978 and 1979

    Energy Technology Data Exchange (ETDEWEB)

    Nedyalkova, N.

    1980-01-01

    Four hundred cases of severe industrial traumas from 1978 to 1979 were analyzed on a computer. The information was coded into four groups, characterizing the human undergoing the trauma, the time of the event, the working environment and the equipment involved, the causes of the accident (objective and subjective with respect to the victim). Eighty-six variables (values) of two types were input into the computer: quantitative (age, length of service at that job and in the profession, the month, date, day, hour and shift); categorical (profession- 11 subgroups; place of the event- 12 subgroups; work being done at the time of the event- 12 subgroups; indirect cause of the accident- 10 subgroups; circumstances of the accident- 11 subgroups; objective 15 subgroups and subjective- 7 subgroups of causes with respect to the victim). Ten factors were identified which lead to industrial accidents (By level of importance); poor dicipline, work shift, profession, date of the month, mine transport, poor instruction, unsafe work place, length of service, month of the year, poor organization of the work place. The following conclusions were made on the basis of these results: 1) poor discipline is undoubtably a primary factor in work safety; In a narrow context, it is connected with insufficient knowledge and lack of expertise, inability to work safely, poor control and organization of the work place; 48% of industrial accidents occur among stope miners and timbermen; 27% among transport workers; 2) 50% of the accidents occurred during the first shift, 16% between 11 and 12 o'clock; 3) 39.5% occurred at the end of the month; 4) 39% occurred due to insufficient and poor quality instruction, lack of necessary expertise and the ability to work safely.

  5. Coal information 1996

    International Nuclear Information System (INIS)

    1997-01-01

    Coal Information (1997 edition) is the latest edition of a publication that has been produced annually by the IEA since 1983. The report is intended to provide both Member countries of the OECD and those employed in all sectors of the coal industry with information on current world coal market trends and long-term prospects. It includes information on coal prices, demand, trade, supply, production capacity, transport, environmental issues (including emission standards for coal-fired boilers), coal ports, coal-fired power stations and coal used in non -OECD countries. Part I of the publication contains a wide ranging review of world coal market developments in 1996 and current prospects to 2010. The review is based on historical data of OECD energy supply and demand, data on other world regions, projections of OECD coal supply, demand and trade and information provided by the CIAB. Part II provides, in tabular and graphical form, a more detailed and comprehensive statistical picture of coal developments and future prospects for coal in the OECD, by region and for individual Member countries. Readers interested in projections are strongly advised to read the notes for individual countries in Principles and Definitions in Part II. Coal statistics for non-OECD countries are presented in Part III of the book. Summary data are available on hard coal supply and end-use statistics for about 40 countries and regions world-wide. Data are based on official national submissions to the United Nations in Geneva and New York, national energy publications, information provided to the IEA Secretariat by national statistical offices as well as other unofficial Secretariat sources. Further information on coal used in non-OECD countries is published annually by the IEA in Energy Statistics and Balances of Non-OECD Countries. Also included in Part III are the Survey of Coal Ports world-wide and the Survey of Coal-fired Power Stations in coal-importing countries

  6. Risk management of energy efficiency projects in the industry - sample plant for injecting pulverized coal into the blast furnaces

    Directory of Open Access Journals (Sweden)

    Jovanović Filip P.

    2016-01-01

    Full Text Available This paper analyses the applicability of well-known risk management methodologies in energy efficiency projects in the industry. The possibilities of application of the selected risk management methodology are demonstrated within the project of the plants for injecting pulverized coal into blast furnaces nos. 1 and 2, implemented by the company US STEEL SERBIA d.o.o. in Smederevo. The aim of the project was to increase energy efficiency through the reduction of the quantity of coke, whose production requires large amounts of energy, reduction of harmful exhaust emission and increase productivity of blast furnaces through the reduction of production costs. The project was complex and had high costs, so that it was necessary to predict risk events and plan responses to identified risks at an early stage of implementation, in the course of the project design, in order to minimise losses and implement the project in accordance with the defined time and cost limitations. [Projekat Ministarstva nauke Republike Srbije, br. 179081: Researching contemporary tendencies of strategic management using specialized management disciplines in function of competitiveness of Serbian economy

  7. Baseload, industrial-scale wind power: An alternative to coal in China

    Energy Technology Data Exchange (ETDEWEB)

    Lew, D.J.; Williams, R.H. [Princeton Univ., Princeton, NJ (United States); Xie Shaoxiong; Zhang Shihui [Ministry of Electric Power, Beijing (China)

    1996-12-31

    This report presents a novel strategy for developing wind power on an industrial-scale in China. Oversized wind farms, large-scale electrical storage and long-distance transmission lines are integrated to deliver {open_quotes}baseload wind power{close_quotes} to distant electricity demand centers. The prospective costs for this approach to developing wind power are illustrated by modeling an oversized wind farm at Huitengxile, Inner Mongolia. Although storage adds to the total capital investment, it does not necessarily increase the cost of the delivered electricity. Storage makes it possible to increase the capacity factor of the electric transmission system, so that the unit cost for long-distance transmission is reduced. Moreover, baseload wind power is typically more valuable to the electric utility than intermittent wind power, so that storage can be economically attractive even in instances where the cost per kWh is somewhat higher than without storage. 9 refs., 3 figs., 2 tabs.

  8. Coal -98

    International Nuclear Information System (INIS)

    Sparre, C.

    1998-01-01

    The following report deals with the use of coal and coke during 1997. Some information about technic, environmental questions and markets are also given. Data have been collected by questionnaires to major users and by telephone to minor users. Preliminary statistical data from SCB have also been used. The use of steam coal for heating purposes during 1997 was 730 000 tons and about 500 000 tons lower than in 1996. The extremely high figures of 1996 were due to twice the production of electricity because of lack of hydro power. The co-generation plants were the main users of coal. The minor plants have increased their use of forest fuels. Probably the use of steam coal will go down in the immediate years both in the heat generating and the co-generating plants. Some foreign analysts, however, estimate a doubled use of coal for energy use after 2020 because of the plans to phase out the nuclear power. During the top year 1987 coal was used in 18 hot water plants and 11 co-generation plants. 1997 these figures are 2 and 8. Taxes and environmental reasons explain this trend. The use of steam coal in the industry has been constant at the level 700 000 tons. This level is supposed to be constant or to vary with business cycles. The import of metallurgical coal in 1997 was 1.6 mill tons like the year before. 1.2 mill tons coke were produced. The coke consumption in the industry was 1.5 Mill tons. 0.3 mill tons of coke were imported. Several other plants have plans to replace the coal with forest fuels, waste fuels and NG. Even the biggest plant, Vaesteraas, has plans to build a block for bio fuels. Helsingborg has started to use wood pellets. The pellets replace most of the coal for the heat production in the co-generation plant. Norrkoeping Kraft AB has taken a fluid bed boiler for different fuels in operation, leading to more than half the coal consumption compared with previous years. They have also rebuilt one of their travelling grates for bio fuels. Stockholm

  9. Polish Cartographical Review

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2017-07-01

    Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

  10. Purification of raw anthracene from black coal tar by crystallization with n-methyl-epsilon-caprolactam

    Energy Technology Data Exchange (ETDEWEB)

    Polaczek, J.; Tecza, T.; Szen, A.; Lisicki, Z.

    1988-07-01

    Compares the performance of NMC (n-methyl-epsilon-caprolactam) and NMP (n-methyl pyrrolidone) as solvents for extracting pure anthracene from crude black coal tar anthracene. Industrial crude anthracene contained 40% anthracene, 13% carbazole, 10% phenanthrene, 3% fluorene and other compounds. Results of laboratory solvent extraction experiments with NMC and NMP are provided, showing the efficient performance of NMC. Extracted anthracene by crystallization had 96% purity. Tables and graphs show crystallization yield and chemical composition of purified anthracene. It is therefore proposed to use NMC solvent for anthracene purification on an industrial scale. A patent application has been submitted under Polish patent nr. P-283250 (1986). 13 refs.

  11. Conformal polishing approach: Tool footprint analysis

    Directory of Open Access Journals (Sweden)

    José A Dieste

    2016-02-01

    Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

  12. Computer Aided Design of Advanced Turbine Airfoil Alloys for Industrial Gas Turbines in Coal Fired Environments

    Energy Technology Data Exchange (ETDEWEB)

    G.E. Fuchs

    2007-12-31

    Recent initiatives for fuel flexibility, increased efficiency and decreased emissions in power generating industrial gas turbines (IGT's), have highlighted the need for the development of techniques to produce large single crystal or columnar grained, directionally solidified Ni-base superalloy turbine blades and vanes. In order to address the technical difficulties of producing large single crystal components, a program has been initiated to, using computational materials science, better understand how alloy composition in potential IGT alloys and solidification conditions during processing, effect castability, defect formation and environmental resistance. This program will help to identify potential routes for the development of high strength, corrosion resistant airfoil/vane alloys, which would be a benefit to all IGT's, including small IGT's and even aerospace gas turbines. During the first year, collaboration with Siemens Power Corporation (SPC), Rolls-Royce, Howmet and Solar Turbines has identified and evaluated about 50 alloy compositions that are of interest for this potential application. In addition, alloy modifications to an existing alloy (CMSX-4) were also evaluated. Collaborating with SPC and using computational software at SPC to evaluate about 50 alloy compositions identified 5 candidate alloys for experimental evaluation. The results obtained from the experimentally determined phase transformation temperatures did not compare well to the calculated values in many cases. The effects of small additions of boundary strengtheners (i.e., C, B and N) to CMSX-4 were also examined. The calculated phase transformation temperatures were somewhat closer to the experimentally determined values than for the 5 candidate alloys, discussed above. The calculated partitioning coefficients were similar for all of the CMSX-4 alloys, similar to the experimentally determined segregation behavior. In general, it appears that computational materials

  13. Analysis of thermal coal pricing and the coal price distortion in China from the perspective of market forces

    International Nuclear Information System (INIS)

    Cui, Herui; Wei, Pengbang

    2017-01-01

    The price of thermal coal has always been the focus of the debate between coal mining industry and electric power industry. The thermal coal price is always lower than other same quality coal, and this phenomenon of thermal coal price distortion has been existing in China for a long time. The distortion coal price can not reflect the external cost and the resource scarcity of coal, which could result in environment deteriorating and inefficient resource allocation. This paper studied the phenomenon of thermal coal price distortion through economic theoretical modeling and empirical cointegration analysis from the perspective of market forces. The results show that thermal coal price is determined by electricity price, the prediction elasticity of a electricity enterprise, price elasticity of demand of electricity, the input prediction elasticity of a electricity enterprise and the price elasticity of supply of thermal coal. The main reason of coal price distortion is the unbalance market force of coal industry and thermal coal generation industry. The distortion rate of coal price is positively related to the market force of electric power industry and negatively related to the industrial concentration of coal industry. - Highlights: • This paper studied thermal coal pricing and the coal price distortion in China. • The main reason of coal price distortion is the unbalance market force. • Thermal coal price is also influenced by electricity price and price elasticity of demand of electricity. • The distortion rate of coal price is negatively related to the industrial concentration of coal industry.

  14. Development of a coal-fired combustion system for industrial process heating applications. Phase 3 final report, November 1992--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-26

    A three phase research and development program has resulted in the development and commercialization of a Cyclone Melting System (CMS{trademark}), capable of being fueled by pulverized coal, natural gas, and other solid, gaseous, or liquid fuels, for the vitrification of industrial wastes. The Phase 3 research effort focused on the development of a process heater system to be used for producing value added glass products from the vitrification of boiler/incinerator ashes and industrial wastes. The primary objective of the Phase 3 project was to develop and integrate all the system components, from fuel through total system controls, and then test the complete system in order to evaluate its potential for successful commercialization. The demonstration test consisted of one test run with a duration of 105 hours, approximately one-half (46 hours) performed with coal as the primary fuel source (70% to 100%), the other half with natural gas. Approximately 50 hours of melting operation were performed vitrifying approximately 50,000 lbs of coal-fired utility boiler flyash/dolomite mixture, producing a fully-reacted vitrified product.

  15. Development of a multisensory arm for process monitoring in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

    2015-01-01

    Robot Assisted Polishing (RAP) process is capable of achieving surface roughness down to Sa 10 nm on industrial components. In RAP, a robot arm carries a polishing module with controlled contact force utilizing oscillating or rotating tools. In this work a multisensory polishing arm with integrated...

  16. The quality of Environmental Management Programmes (EMPRs) within the coal mining industry in South Africa / Casper Joubert

    OpenAIRE

    Joubert, Casper

    2015-01-01

    Mining operations negatively impact the environment and, as a result, South African legislation requires that, as part of an Environmental Impact Assessment, an Environmental Management Programme (EMPRs) be developed and implemented to manage all the impacts identified. The Coal Mining Sector was selected for this research because of the important role it plays within the South African economy. In this research, the quality of Environmental Management Programmes within the Coal Mining Sector ...

  17. Coal-water slurry fuel combustion testing in an oil-fired industrial boiler. Semiannual technical progress report, February 15, 1994--August 15, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Scaroni, A.W.

    1994-11-30

    The Pennsylvania State University is conducting a coal-water slurry fuel (CWSF) program for the United States Department of Energy (DOE) and the Commonwealth of Pennsylvania with the objective of determining the viability of firing CWSF in an industrial boiler designed for heavy fuel oil. The project will also provide information to help in the design of new system specifically configured to fire these clean coal-based fuels. The project consists of four phases: (1) design, permitting, and test planning, (2) construction and start up, (3) demonstration and evaluation (1,000-hour demonstration), and (4) expanded demonstration and evaluation (installing a CWSF preparation circuit, conducting an additional 1,000 hours of testing, and installing an advanced flue gas treatment system). The boiler testing and evaluation will determine if the CWSF combustion characteristics, heat release rate, fouling and slagging behavior, corrosion and erosion tendencies, and fuel transport, storage, and handling characteristics can be accommodated in a boiler system designed to fire heavy fuel oil. In addition, the proof-of-concept demonstration will generate data to determine how the properties of a CWSF and its parent coal affect boiler performance. The economic factors associated with retrofitting boilers will also be evaluated. During this reporting period, the construction of the CWSF preparation circuit (as well as a dry, micronized coal circuit) continued. The CWSF preparation circuit will be completed by November 1,1994. Additional activities included receiving a coal-designed burner and installing it on the demonstration boiler, and working with DOE in selecting pollution control systems to install on the boiler.

  18. Coal-water slurry fuel combustion testing in an oil-fired industrial boiler. Semiannual technical progress report, August 15, 1994--February 15, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.

    1995-05-12

    The Pennsylvania State University is conducting a coal-water slurry fuel (CWSF) program for the United States Department of Energy (DOE) and the Commonwealth of Pennsylvania with the objective of determining the viability of firing CWSF in an industrial boiler designed for heavy fuel oil. Penn State and DOE have entered into a cooperative agreement to determine if CWSFs prepared from cleaned coal (containing approximately 3.5 wt.% ash and 0.9 wt.% sulfur) can be burned effectively in a heavy fuel oil-designed industrial boiler without adverse impact on boiler rating, maintainability, reliability, and availability. The project will also provide information to help in the design of new systems specifically configured to fire these clean coal-based fuels. The project consists of four phases: (1) design, permitting, and test planning, (2) construction and start up, (3) demonstration and evaluation (1,000-hour demonstration), and (4) expanded demonstration and evaluation (installing a CWSF preparation circuit, conducting an additional 1,000 hours of testing, and installing an advanced flue gas treatment system). The boiler testing and evaluation will determine if the CWSF combustion characteristics, heat release rate, fouling and stagging behavior, corrosion and erosion tendencies, and fuel transport, storage, and handling characteristics can be accommodated in a boiler system designed to fire heavy fuel oil. In addition, the proof-of-concept demonstration will generate data to determine how the properties of a CWSF and its parent coal affect boiler performance. The economic factors associated with retrofitting boilers will also be evaluated. The first three phases (i.e., the first demonstration) have been completed and the combustion performance of the burner that was provided with the boiler did not meet performance goals. Consequently, the first demonstration has been concluded at 500 hours.

  19. Organization, activities, and issues with particular emphasis on coal

    International Nuclear Information System (INIS)

    Cole, D.R.

    1992-01-01

    The paper discusses Colorado's coal industry; the Colorado Mining Association; lobbying and legislative actions; industry networking, information, and communications; coal issues and activities; and Colorado issues and activities. Some of the latter include: land reclamation of mined lands; oil and gas drilling and coal mine conflicts; wild and scenic river designations; general permitting of coal mining discharges; and coal mine land reclamation awards

  20. The Perception of Job-related Motivators When Choosing a Career in the Tourism and Hospitality Industry – A Comparative Study Between Polish and Spanish Students

    Directory of Open Access Journals (Sweden)

    Grobelna Aleksandra

    2017-06-01

    Full Text Available The recent rapid growth of the tourism and hospitality industries raises a question about the quantity and quality of the workforce needed in these sectors. In the tourism/hospitality industry, where most services are delivered directly by employees, competitive advantage is primarily attained through people (employees, who are perceived as an integral component of tourism experience. This creates challenges for an industry suffering from high rates of staff turnover, especially of young employees who leave their jobs after graduation, choosing other career paths.

  1. The state of documentation of methane resources of coal mines in the Upper Silesian coal basin

    Energy Technology Data Exchange (ETDEWEB)

    Kwarcinski, J. [Polish Geological Institute, Sosnowiec (Poland). Upper Silesian Branch

    1995-08-01

    The Polish Ministers` Council Economic Committee Resolution of 27 July 1962 required that coalbed methane reserves should be treated as a coal associated resource. Thus it is necessary to estimate the reserves of methane occurring within mining properties or coal exploration projects. The methodology for methane resource calculation is described. As of 1 January 1994, 22 coal mines had documented methane reserves as a coal associated resource. However, considerable reserves of coalbed methane in the Upper Silesian Coal Basin are not yet documented according to formal procedures and are not included into the State Resource Balance Sheets. 10 refs., 3 figs., 1 tab.

  2. The position of the French coal industry on the European Commission strategy against acidification; Position de charbonnages de France sur la strategie de lutte contre l`acidification de la commission europeenne

    Energy Technology Data Exchange (ETDEWEB)

    Dejean, M. [CDF Energie, 92 - Rueil-Malmaison (France)

    1997-12-31

    The Charbonnages de France group (French coal industry) presents several objections to the projected European Commission program concerning the reduction of air pollution emission and acidification: reaching so rapidly the projected reduction level means a drastic improvement to the large burning plants, regardless of the low operating duration of the coal plants in France, which are used for electric power production only at peak or semi-base periods or in industries (principally food industry) with low energy duration requirements, and regardless of the important emission reductions already achieved in France. The coal industry proposes to simply apply the present IPPC directive; already, turning to circulating fluidized bed units has allowed important SO{sub 2} and NO{sub x} emission reductions. The evolution of sulfur and nitrogen oxide emissions in France between 1990 and 1995 is detailed

  3. Developing Queensland coal

    Energy Technology Data Exchange (ETDEWEB)

    Philp, A. [Australian QTherm (Australia)

    1998-11-01

    Despite regional economic woes and falling coal prices, there have been exciting developments in Queensland`s coal industry with the announcement of three new coal mines, four mine expansions and two mine feasibility studies being undertaken. The article describes new projects being undertaken in Coppabella, Morahbah North and Hall Creek all in the Northern Bowen Basin, and mine expansions underway at Burton, Enshan, Newlands and Oaky North. Feasibility studies are the progress in the Millmerran and Acland deposits in The Moreton Basin. However, a number of proposed expansions at some major mines, such as Moura, Saraji and Peak Downs, have been postponed due to falling international coal prices. 2 figs., 2 photos.

  4. Industry trends

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This section discusses the US energy supply and demand situation including projections for energy use, the clean coal industry (constraints of regulation on investment in new technologies, technology trends, and current pollution control efficiency), opportunities in clean coal technology (Phase 2 requirements of Title 4 of the Clean Air Act, scrubber demand for lime and limestone, and demand for low sulfur coal), and the international market of clean coal technologies

  5. Feasibility study: comparison of coal- and nuclear-fueled alternatives for process steam and by product electrical power generation for the PPG Industries, Incorporated Plant Site, Lake Charles, Louisiana

    Energy Technology Data Exchange (ETDEWEB)

    1978-07-01

    The purpose of the study was to evaluate the technical and economic feasibility of a small, (365 MWt) nuclear reactor for supplying process steam and electricity as a replacement for energy sources using increasingly scarce natural gas or oil. The PPG Industries, Incorporated Plant Site at Lake Charles, Louisiana, was chosen as representative of industrial installations that require sizeable amounts of process steam and electricity. For comparison purposes conventional coal-fired boilers were also evaluated. It was determined that both nuclear- and coal-based process energy supply systems are technically feasible. For the specific steam/electricity demands at the reference site, the coal-fired plant proved to be economically more attractive than the nuclear units. For an application requiring a base-loaded supply of saturated steam, utilizing full reactor capacity, the nuclear option appears competitive for coal costing $40/ton in 1978 dollars.

  6. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal, Annual Progress Report, October 1, 2005 through September 30, 2006

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce G

    2006-09-29

    Since 1998, The Pennsylvania State University has been successfully managing the Consortium for Premium Carbon Products from Coal (CPCPC), which is a vehicle for industry-driven research on the promotion, development, and transfer of innovative technology on premium carbon produces from coal to the U.S. industry. The CPCPC is an initiative being led by Penn State, its co-charter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provides the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity has continued under the present cooperative agreement, No. DE-FC26-03NT41874, which started October 1, 2003. The objective of the second agreement is to continue the successful operation of the CPCPC. The CPCPC has enjoyed tremendous success with its organizational structure, that includes Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC is its industry-led council that selects proposals submitted by CPCPC members to ensure CPCPC target areas have strong industrial support. Base funding for the selected projects is provided by NETL with matching funds from industry. At the annual funding meeting held in October 2003, ten projects were selected for funding. Subcontracts were let from Penn State to the subcontractors on March 1, 2004. Nine of the ten 2004 projects were completed during the previous annual reporting period and their final reports were submitted with the previous annual report (i.e., 10/01/04-09/30/05). The final report for the remaining project, which was submitted during this reporting

  7. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal, Annual Progress Report, October 1, 2004 through September 30, 2005

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce G

    2006-03-01

    Since 1998, The Pennsylvania State University (PSU) has been successfully operating the Consortium for Premium Carbon Products from Coal (CPCPC), which is a vehicle for industry-driven research on the promotion, development, and transfer of innovative technology on premium carbon produces from coal to the U.S. industry. The CPCPC is an initiative being led by PSU, its co-charter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provides the base funding for the program, with PSU responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity has continued under the present cooperative agreement, No. DE-FC26-03NT41874, which started October 1, 2003. The objective of the second agreement is to continue the successful operation of the CPCPC. The CPCPC has enjoyed tremendous success with its organizational structure, that includes PSU and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC is its industry-led council that selects proposals submitted by CPCPC members to ensure CPCPC target areas have strong industrial support. A second contract was executed with DOE NETL starting in October 2003 to continue the activities of CPCPC. An annual funding meeting was held in October 2003 and the council selected ten projects for funding. Base funding for the projects is provided by NETL with matching funds from industry. Subcontracts were let from Penn State to the subcontractors on March 1, 2004. Nine of the ten projects have been completed and the final reports for these 2004 projects are attached. An annual funding meeting was held in November 2004 and the council

  8. Analysis of hard coal quality for narrow size fraction under 20 mm

    Science.gov (United States)

    Niedoba, Tomasz; Pięta, Paulina

    2018-01-01

    The paper presents the results of an analysis of hard coal quality diversion in narrow size fraction by using taxonomic methods. Raw material samples were collected in selected mines of Upper Silesian Industrial Region and they were classified according to the Polish classification as types 31, 34.2 and 35. Then, each size fraction was characterized in terms of the following properties: density, ash content, calorific content, volatile content, total sulfur content and analytical moisture. As a result of the analysis it can be stated that the best quality in the entire range of the tested size fractions was the 34.2 coking coal type. At the same time, in terms of price parameters, high quality of raw material characterised the following size fractions: 0-6.3 mm of 31 energetic coal type and 0-3.15 mm of 35 coking coal type. The methods of grouping (Ward's method) and agglomeration (k-means method) have shown that the size fraction below 10 mm was characterized by higher quality in all the analyzed hard coal types. However, the selected taxonomic methods do not make it possible to identify individual size fraction or hard coal types based on chosen parameters.

  9. Preliminary draft industrial siting administration permit application: Socioeconomic factors technical report. Final technical report, November 1980-May 1982. [Proposed WyCoalGas project in Converse County, Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    Under the with-project scenario, WyCoalGas is projected to make a difference in the long-range future of Converse County. Because of the size of the proposed construction and operations work forces, the projected changes in employment, income, labor force, and population will alter Converse County's economic role in the region. Specifically, as growth occurs, Converse County will begin to satisfy a larger portion of its own higher-ordered demands, those that are currently being satisfied by the economy of Casper. Business-serving and household-serving activities, currently absent, will find the larger income and population base forecast to occur with the WyCoalGas project desirable. Converse County's economy will begin to mature, moving away from strict dependence on extractive industries to a more sophisticated structure that could eventually appeal to national, and certainly, regional markets. The technical demand of the WyCoalGas plant will mean a significant influx of varying occupations and skills. The creation of basic manufacturing, advanced trade and service sectors, and concomitant finance and transportation firms will make Converse County more economically autonomous. The county will also begin to serve market center functions for the smaller counties of eastern Wyoming that currently rely on Casper, Cheyenne or other distant market centers. The projected conditions expected to exist in the absence of the WyCoalGas project, the socioeconomic conditions that would accompany the project, and the differences between the two scenarios are considered. The analysis is keyed to the linkages between Converse County and Natrona County.

  10. Coal-water slurry fuel combustion testing in an oil-fired industrial boiler. Semiannual technical progress report, August 15, 1993--February 15, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Morrison, J.L.; Poe, R.L.; Scaroni, A.W.

    1994-11-30

    The Pennsylvania State University is conducting a coal-water slurry fuel (CWSF) program with the objective of determining the viability of firing CWSF in an industrial boiler designed for heavy fuel oil. The project will also provide information to help in the design of new systems specifically configured to fire these clean coal-based fuels. The project consists of four phases: (1) design, permitting, and test planning, (2) construction and start up, (3) demonstration and evaluation (1,000-hour demonstration), and (4) expanded demonstration and evaluation (installing a CWSF preparation circuit, conducting an additional 1,000 hours of testing, and installing an advanced flue gas treatment system). The boiler testing and evaluation will determine if the CWSF combustion characteristics, heat release rate, fouling and slagging behavior, corrosion and erosion tendencies, and fuel transport, storage, and handling characteristics can be accommodated in a boiler system designed to fire heavy fuel oil. In addition, the proof-of-concept demonstration will generate data to determine how the properties of a CWSF and its parent coal affect boiler performance. The economic factors associated with retrofitting boilers will also be evaluated. The first demonstrations been completed and the combustion performance of the burner that was provided with the boiler has been determined to be unacceptable. Consequently, the first demonstration has been concluded at 500 hours. The second demonstration will be conducted after a proven CWSF-designed burner is installed on the boiler. During this reporting period, the construction of the fuel preparation facility that will contain the CWSF circuit (as well as a dry, micronized coal circuit) was completed. Proposals from potential suppliers of the flue gas treatment systems were reviewed by Penn State and DOE.

  11. Automation and control in industrial installations. Its application in pressurized fluidized bed plants, coal washeries etc. Automatizacion y control en instalaciones industriales. Su aplicacion en centrales de lecho fluido a presion, lavaderos de carbon etc

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo Tarifa, R. (ENDESA, Madrid (Spain))

    1988-01-01

    This paper presents the automation and electronic control systems, based on the most advanced technologies on the market. The most recent techniques concerning industrial plant supervision and the processing of information obtained from the above mentioned systems are discussed. Intraplant communications between the control systems and the supervision computers as well as communications among cascade computers are described. These studies are applied to specific cases of pressurized fluidized bed plants, coal washing plants, coal yards, etc.

  12. Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Survey by region/industry in India; Kankyo chowagata sekitan riyo system kanosei chosa. Indo ni okeru sekitan riyo gaikyo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    A survey was made in India which is a coal producing/consuming country following China in Asia and where coal is used for about 60% of the primary commercial energy. The survey was conducted on coal production/distribution/utilization and environmental issues, aiming at studying feasibility of introducing the environmentally friendly coal utilization system into every industry including the residential/commercial one, and at implementing a comprehensive master plan including Japan`s international cooperation. Total power source facilities in fiscal 1995 are 83.3 million kW, 64% of which are coal thermal power facilities and generated 260 TWh, 69% of the total output energy. Main commercial energy sources are coal, oil and natural gas, and oil is self-sufficient. The survey this time did not examine very well the actual state of the environmental pollution problem caused by the coal utilization. Indian coal is high in ash content but low in sulfur content, and therefore, SOx polluting air has not been a very important problem so far, but soot/smoke is almost the problem. Further, ash treatment after combustion at boilers, etc. is expected to be a big problem in the future. 49 figs., 88 tabs.

  13. Coal: the dinosaur wakes up

    International Nuclear Information System (INIS)

    Rousseau, Y.; Cosnard, D.

    2005-01-01

    In western countries, coal is considered as an industry of the past, but at the Earth's scale the situation is radically the opposite. Since three years, coal is the faster developing energy source, in particular thanks to China expansion and to the oil crisis which makes coal more competitive. This short paper presents the situation of coal mining in China: projects, working conditions and environmental impact. (J.S.)

  14. Functional Median Polish

    KAUST Repository

    Sun, Ying

    2012-08-03

    This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

  15. Coal, culture and community

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    16 papers are presented with the following titles: the miners; municipalisation and the millenium - Bolton-upon-Dearne Urban District Council 1899-1914; the traditional working class community revisited; the cultural capital of coal mining communities; activities, strike-breakers and coal communities; the limits of protest - media coverage of the Orgreave picket during the miners` strike; in defence of home and hearth? Families, friendships and feminism in mining communities; young people`s attitudes to the police in mining communities; the determinants of productivity growth in the British coal mining industry, 1976-1989; strategic responses to flexibility - a case study in coal; no coal turned in Yorkshire?; the North-South divide in the Central Coalfields; the psychological effects of redundancy and worklessness - a case study from the coalfields; the Dearne Valley initiative; the future under labour: and coal, culture and the community.

  16. Development and testing of a high efficiency advanced coal combustor: Phase 3 industrial boiler retrofit. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Patel, R.L.; Thornock, D.E.; Miller, B.G.; Scaroni, A.W.; McGowan, J.G.

    1998-03-01

    Economics and/or political intervention may one day dictate the conversion from oil or natural gas to coal in boilers that were originally designed to burn oil or gas. In recognition of this future possibility the US Department of Energy, Federal Energy Technical Center (DOE-FETC) supported a program led by ABB Power Plant Laboratories with support from the Energy and Fuels Research Center of Penn State University with the goal of demonstrating the technical and economic feasibility of retrofitting a gas/oil designed boiler to burn micronized coal. In support of the overall goal the following specific objectives were targeted: develop a coal handling/preparation system that can meet the technical and operational requirements for retrofitting microfine coal on a boiler designed for burning oil or natural gas; maintain boiler thermal performance in accordance with specifications when burning oil or natural gas; maintain NOx emissions at or below 0.6 lb NO{sub 2} per million Btu; achieve combustion efficiencies of 98% or higher; and determine economic payback periods as a function of key variables.

  17. Clean coal technologies: A business report

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The book contains four sections as follows: (1) Industry trends: US energy supply and demand; The clean coal industry; Opportunities in clean coal technologies; International market for clean coal technologies; and Clean Coal Technology Program, US Energy Department; (2) Environmental policy: Clean Air Act; Midwestern states' coal policy; European Community policy; and R ampersand D in the United Kingdom; (3) Clean coal technologies: Pre-combustion technologies; Combustion technologies; and Post-combustion technologies; (4) Clean coal companies. Separate abstracts have been prepared for several sections or subsections for inclusion on the data base

  18. The role of multiple regression and exploratory data analysis in the development of leukemia incidence risk models for comparison of radionuclide air stack emissions from nuclear and coal power industries

    International Nuclear Information System (INIS)

    Prybutok, V.R.

    1995-01-01

    Risk associated with power generation must be identified to make intelligent choices between alternate power technologies. Radionuclide air stack emissions for a single coal plant and a single nuclear plant are used to compute the single plant leukemia incidence risk and total industry leukemia incidence risk. Leukemia incidence is the response variable as a function of radionuclide bone dose for the six proposed dose response curves considered. During normal operation a coal plant has higher radionuclide emissions than a nuclear plant and the coal industry has a higher leukaemia incidence risk than the nuclear industry, unless a nuclear accident occurs. Variation of nuclear accident size allows quantification of the impact of accidents on the total industry leukemia incidence risk comparison. The leukemia incidence risk is quantified as the number of accidents of a given size for the nuclear industry leukemia incidence risk to equal the coal industry leukemia incidence risk. The general linear model is used to develop equations that relate the accident frequency required for equal industry risks to the magnitude of the nuclear emission. Exploratory data analysis revealed that the relationship between the natural log of accident number versus the natural log of accident size is linear. (Author)

  19. Technological changes illustrated by the coal tar and tar dye industry; Die Wandlung der Technik am Beispiel der Steinkohlenteer- und Teerfarben-Chemie

    Energy Technology Data Exchange (ETDEWEB)

    Collin, G. [Deutsche Gesellschaft fuer Chemisches Apparatewesen, Chemische Technik und Biotechnologie e.V. (DECHEMA), Frankfurt am Main (Germany)

    2001-05-01

    Coal tar was detected in the 17th century in laboratory experiments based on empirical knowledge. In the 18th century industrial revolution, coal tar was an undesired by-product of iron production and coking plants. It was first used in the 19th century for impregnating railway sleepers. Later developments in atomic theory, new chemical symbols and organic element analysis provided the basis for discovering and chemical characterisation of coal tar constituents. Laboratory experiments with these tar constituents resulted in the first synthetic dyes, the postulation of tetravalent carbon and the resulting structural theory in organic chemistry for systematic synthesis of many tar dyes to substitute natural dyes in the textile industry. The technical application of these syntheses was part 2 of the industrial revolution and the foundation of the chemical industry in Germany, which developed rapidly in the 2nd half of the 19th century. Tar dye chemistry has made a significant contribution to Germany's economic growth and the change from an agricultural to an industrialized country. [German] Die Entdeckung des Steinkohlenteers im 17. Jahrhundert basiert auf durch Erfahrungswissen gepraegten Laboratoriumsexperimenten. Im Verlauf der 'Industriellen Revolution' des 18. Jahrhunderts ist der Steinkohlenteer zunaechst ein laestiges Abfallprodukt der Eisengewinnung im Kokshochofen und der Leuchtgasherstellung durch Kohlenverkokung. Erste technische Applikation finden Steinkohlenteeroele im 19. Jahrhundert durch den Eisenbahnbau zur Langzeit-Konservierung der dafuer benoetigten Holzschwellen. Die wissenschaftlichen Erfkenntnisse zur Atomtheorie, eine neue chemische Zeichensprache und die organische Elementaranalyse werden Voraussetzungen zur Entdeckung und chemischen Charakterisierung der Hauptinhaltsstoffe des Steinkohlenteers. Laboratoriumsexperimente mit den entdeckten Teerinhaltsstoffen fuehren zur Erfindung der ersten synthetischen Farbstoffe, die

  20. Coal: Less than lackluster

    International Nuclear Information System (INIS)

    Doerell, P.

    1994-01-01

    Not many in the world coal industry will remember 1993 as a good year. The reasons for the poor state of affairs were first the weak economic climate, and second, the energy glut. For the first time after expanding steadily since the 70s, seaborne trade in hard coal fell by about 4% to 350M mt. Steam coal accounted for a good half of this volume. While demand continued to rise in the newly industrialized countries of the Pacific area, imports into Europe of both coking coal and steam coal fell sharply. The United States, CIS, and Canada had to accept substantial losses of export volume. Australia, as well as South Africa, Colombia, and Indonesia consolidated their market positions and Poland, too, recorded high volumes available for export. The positive news came from Australia, where in mid-December the New South Wales coal industry reported an increase in the net profit after tax from $A83M (about $55M) to $A98M (about $126M) in 1992/1993. This success was however ascribed less to an improvement in the fundamental mining indicators than to the fall in the Australian dollar and the lowering of corporate tax. The reduction in capital investment by 26% down to $A330M (after the previous year when it had also been cut by 25%) is seen by the chairman of the NSW Coal Assoc. as not auguring well for the industry's ability to meet the forecast growth in demand to the year 2000

  1. Methodology of Estimation of Methane Emissions from Coal Mines in Poland

    Science.gov (United States)

    Patyńska, Renata

    2014-03-01

    Based on a literature review concerning methane emissions in Poland, it was stated in 2009 that the National Greenhouse Inventory 2007 [13] was published. It was prepared firstly to meet Poland's obligations resulting from point 3.1 Decision no. 280/2004/WE of the European Parliament and of the Council of 11 February 2004, concerning a mechanism for monitoring community greenhouse gas emissions and for implementing the Kyoto Protocol and secondly, for the United Nations Framework Convention on Climate Change (UNFCCC) and Kyoto Protocol. The National Greenhouse Inventory states that there are no detailed data concerning methane emissions in collieries in the Polish mining industry. That is why the methane emission in the methane coal mines of Górnośląskie Zagłębie Węglowe - GZW (Upper Silesian Coal Basin - USCB) in Poland was meticulously studied and evaluated. The applied methodology for estimating methane emission from the GZW coal mining system was used for the four basic sources of its emission. Methane emission during the mining and post-mining process. Such an approach resulted from the IPCC guidelines of 2006 [10]. Updating the proposed methods (IPCC2006) of estimating the methane emissions of hard coal mines (active and abandoned ones) in Poland, assumes that the methane emission factor (EF) is calculated based on methane coal mine output and actual values of absolute methane content. The result of verifying the method of estimating methane emission during the mining process for Polish coal mines is the equation of methane emission factor EF.

  2. Is there a risk to safety when working in the New South Wales underground coal-mining industry while having binaural noise-induced hearing loss?

    Science.gov (United States)

    Viljoen, D A; Nie, V; Guest, M

    2006-03-01

    Underground coal-mine workers suffer noise-induced hearing loss and continue working in the industry while having varying degrees of deafness. Few studies have researched the risk to safety arising from the loss of hearing. This study is designed to investigate the possible association between hearing loss and accidents in the New South Wales underground coal-mining industry. A study was conducted, gathering data over a 10-year period from 1994 to 2003, which identified 97 cases that have had accidents and 983 controls that have had no accidents. Hearing loss levels were noted and compared in the cases and controls. Multiple logistic regression was used to determine whether the variables were significant risk factors in the occurrence of accidents. Hearing loss levels in the total cohort varied from 0 to 54%. The proportion of cases with hearing loss appeared to be significantly higher in the young age group of <29 years than in the controls, but was not significantly different in the older age groups. This study indicates that workers who have lost up to 54% binaural high tone hearing and are older than 29 years do not appear to have an increased risk to safety when compared with workers who do not have hearing loss. However, workers in the young age group of <29 years who have high tone hearing loss may be at an increased risk of accident.

  3. Partial Oxidation Gas Turbine for Power and Hydrogen Co-Production from Coal-Derived Fuel in Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Rabovitser

    2009-06-30

    , pressures, and volumetric flows practically identical. In POGT mode, the turbine specific power (turbine net power per lb mass flow from expander exhaust) is twice the value of the onventional turbine. POGT based IGCC plant conceptual design was developed and major components have been identified. Fuel flexible fluid bed gasifier, and novel POGT unit are the key components of the 100 MW IGCC plant for co producing electricity, hydrogen and/or yngas. Plant performances were calculated for bituminous coal and oxygen blown versions. Various POGT based, natural gas fueled systems for production of electricity only, coproduction of electricity and hydrogen, and co production of electricity and syngas for gas to liquid and hemical processes were developed and evaluated. Performance calculations for several versions of these systems were conducted. 64.6 % LHV efficiency for fuel to electricity in combined cycle was achieved. Such a high efficiency arise from using of syngas from POGT exhaust s a fuel that can provide required temperature level for superheated steam generation in HRSG, as well as combustion air preheating. Studies of POGT materials and combustion instabilities in POR were conducted and results reported. Preliminary market assessment was performed, and recommendations for POGT systems applications in oil industry were defined. POGT technology is ready to proceed to the engineering prototype stage, which is recommended.

  4. Energy-saving belt conveyors installed in Polish collieries

    Directory of Open Access Journals (Sweden)

    Jerzy ANTONIAK

    2010-01-01

    Full Text Available An important problem of reducing energy consumption and dioxide emissions in the stage of construction and operation of mine belt conveyors is connected with their broad use in the industry. However, this notion is related to a reduction of electric energy consumption for conveyor drive and for production of conveyor components and assemblies (belts, rollers, load-bearing structure etc.. An essential role is played by an increased life of belt conveyors assemblies and components, principally belts. A reduced electric energy consumption results in a decreased CO2 emissions, e.g. hard coal – fired power station issues 0.28 kg CO2 per production of 1 kWh, in to answer production of 1 t steel accounts for 3.2 t CO2 emissions. The subject-matter presented in the paper concerning energy-saving in the horizontally and inclined mine belt conveyors installed in a Polish colliery – Anna, Jankowice and Marcel, has a big economic significance and it is important from the point of view of environmental protection.

  5. Industry and improvement: state and class formations in Nova Scotia`s coal-mining countryside, 1790-1864

    Energy Technology Data Exchange (ETDEWEB)

    Samson, D.J.

    1997-12-31

    The role of state and class formation in Nova Scotia before Confederation is discussed. The farming and coal mining districts of northern Nova Scotia are described as opposing segments that together were central to the development of liberal capitalist government forms in the province. A range of economic circumstances is considered: squatters, estates, mixed farming, coal mining, trading, quarrying, and fraternal societies. The role of enterprises such as the General Mining Association, a British venture, in colonization and in constraint of local initiative and accumulation is considered. Rural liberals created a positive place in self-government, while colonial liberals constructed a liberalism that was centred around the state and economic progress. The poor and those without property were allotted marginal public roles.

  6. Application of ERTS-1 imagery to fracture related mine safety hazards in the coal mining industry. [Indiana

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

    1974-01-01

    The author has identified the following significant results. New fracture detail of Indiana has been observed and mapped from ERTS-1 imagery. Studies so far indicate a close relationship between the directions of fracture traces mapped from the imagery, fractures measured on bedrock outcrops, and fractures measured in the underground mines. First hand observations and discussions with underground mine operators indicate good correlation of mine hazard maps prepared from ERTS-1/aircraft imagery and actual roof falls. The inventory of refuse piles/slurry ponds of the coal field of Indiana has identified over 225 such sites from past mining operations. These data will serve the State Legislature in making tax decisions on coal mining which take on increased importance because of the energy crisis.

  7. Coal -94

    International Nuclear Information System (INIS)

    Sparre, C.

    1994-05-01

    This report deals with use of coal and coke during 1993; information about techniques, environmental questions and markets are also given. Use of steamcoal for heating purposes has been reduced about 3 % during 1993 to 1,0 mill tons. This is the case especially for the heat generating boilers. Production in co-generation plants has been constant and has increased for electricity production. Minor plants have increased their use of forest fuels, LPG and NG. Use of steamcoal will probably go down in the immediate years both in heat generating and co-generating plants. Coal-based electricity has been imported from Denmark during 1993 corresponding to about 400 000 tons of coal, when several of our nuclear plants were stopped. Use of steamcoal in the industry has been constant at 700 000 tons. This level is supposed to be constant or to vary with business cycles. The import of metallurgical coal in 1993 was 1,6 mill tons like the year before. 1,2 mill tons coke were produced. Coke consumption in industry was 1,4 mill tons. 0,2 mill tons of coke were imported. Average price of steamcoal imported to Sweden in 1993 was 308 SEK/ton or 13 % higher than in 1992; this can be explained by the dollar price level increasing 34% in 1993. For the world, the average import price was 50,0 USD/ton, a decrease of 6 %. The coal market during 1993 was affected by less consumption in Europe, shut downs of European mines and decreasing prices. High freight price raises in Russia has affected the Russian export and the market in northern Europe. The prices have been stabilized recently. All Swedish plants meet emission limits of dust, SO 2 and NO x . Co-generation plants all have some sort of SO 2 -removal system; the wet-dry method is mostly used. A positive effect of the recently introduced NO x -duties is a 40% reduction

  8. Coal-water slurry fuel combustion testing in an oil-fired industrial boiler. Semi-annual technical progress report, 15 August 1995--15 February 1996

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Scaroni, A.W.

    1997-06-03

    The Pennsylvania State University is conducting a coal-water slurry fuel (CWSF) program with the US Department of Energy (DOE) and the Commonwealth of Pennsylvania to determine the viability of firing CWSF in an industrial boiler designed for heavy fuel oil. Penn State and DOE have entered into a cooperative agreement to determine if CWSFs prepared from cleaned coal (containing approximately 3.5 wt.% ash and 0.9 wt.% sulfur) can be burned effectively in a heavy fuel oil-designed industrial boiler without adverse impact on boiler rating, maintainability, reliability, and availability. Information will also be generated to help in the design of new systems specifically configured to fire these clean coal-based fuels. The project consists of four phases: (1) design, permitting, and test planning, (2) construction and start up, (3) demonstration and evaluation (1,000-hour demonstration), and (4) expanded demonstration and evaluation (installing a CWSF preparation circuit, performing baseline tests firing No. 6 fuel oil, and conducting additional CWSF testing). The first three phases (i.e., the first 1,000-hour demonstration) have been completed and the combustion performance of the burner that was provided with the boiler did not meet performance goals. A maximum coal combustion efficiency of 95% (compared to a target of 98%) was achieved and natural gas cofiring (15% of the total thermal input) was necessary to maintain a stable flame. Consequently, the first demonstration was terminated after 500 hours. The second CWSF demonstration (Phase 4) will be conducted with a proven CWSF-designed burner. Prior to starting the second demonstration, a CWSF preparation circuit was constructed to provide flexibility in CWSF production. The circuit initially installed involved single-stage grinding. A regrid circuit was recently installed and will be evaluated. A burner was installed from ABB Combustion Engineering (ABB/CE) and will be used to generate baseline data firing No. 6

  9. Coal mining in the power industry of the Federal Republic of Germany in 2015; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2015

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2016-11-15

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2015. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  10. Coal mining in the power industry of the Federal Republic of Germany in 2016; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2016

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-11-15

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2016. Statistical data are presented for the power market and coal market, hard coal mining as well as the brown coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  11. Coal mining in the power industry of the Federal Republic of Germany in 2000; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    After an introductory text divided into the sections energy and coal market, coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. [German] Nach einem einfuehrenden Text, der in die Abschnitte Energie- und Kohlenmarkt, Steinkohlenbergbau und Braunkohlenbergbau gegliedert ist, wird ein umfangreiches Tabellenmaterial vorgelegt, das die wichtigsten Kennzahlen des deutschen Kohlenbergbaus enthaelt.

  12. Coal mining in the power industry of the Federal Republic of Germany in 2010; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-11-15

    The contribution under consideration reports on the coal mining in the Federal Republic of Germany in the year 2010. Statistical data are presented for the power market and coal market, brown coal mining as well as the hard coal mining. These data consider the energy consumption in Germany, power production, iron and steel production, utilization, re-cultivation and employees.

  13. Coal mining in the power industry of the Federal Republic of Germany in 1998; Der Kohlenbergbau in der Energiewirtschaft der Bundesrepublik Deutschland im Jahre 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    After an introductory text divided into the sections energy and coal market, coal mining and brown coal mining, extensive tables containing the most important characteristic figures of German coal mining are shown. (orig.) [German] Nach einem einfuehrenden Text, der in die Abschnitte Energie- und Kohlenmarkt, Steinkohlenbergbau und Braunkohlenbergbau gegliedert ist, wird ein umfangreiches Tabellenmaterial vorgelegt, das die wichtigsten Kennzahlen des deutschen Kohlenbergbaus enthaelt. (orig.)

  14. The environment, public relations and coal

    Energy Technology Data Exchange (ETDEWEB)

    Wood, W.J. (Coal Association of Canada, Calgary, AB (Canada))

    1990-09-01

    Information is presented in note format. The presentation covers world environmental issues such as the greenhouse effect, an overview of the coal industry's role in atmospheric emissions of CO{sub 2}, and finally, the need for the coal industry to make the public aware of coal's current and future role in our economic and energy future.

  15. Mercury emissions from coal combustion in Silesia, analysis using geostatistics

    Science.gov (United States)

    Zasina, Damian; Zawadzki, Jaroslaw

    2015-04-01

    Data provided by the UNEP's report on mercury [1] shows that solid fuel combustion in significant source of mercury emission to air. Silesia, located in southwestern Poland, is notably affected by mercury emission due to being one of the most industrialized Polish regions: the place of coal mining, production of metals, stone mining, mineral quarrying and chemical industry. Moreover, Silesia is the region with high population density. People are exposed to severe risk of mercury emitted from both: industrial and domestic sources (i.e. small household furnaces). Small sources have significant contribution to total emission of mercury. Official and statistical analysis, including prepared for international purposes [2] did not provide data about spatial distribution of the mercury emitted to air, however number of analysis on Polish public power and energy sector had been prepared so far [3; 4]. The distribution of locations exposed for mercury emission from small domestic sources is interesting matter merging information from various sources: statistical, economical and environmental. This paper presents geostatistical approach to distibution of mercury emission from coal combustion. Analysed data organized in 2 independent levels: individual, bottom-up approach derived from national emission reporting system [5; 6] and top down - regional data calculated basing on official statistics [7]. Analysis, that will be presented, will include comparison of spatial distributions of mercury emission using data derived from sources mentioned above. Investigation will include three voivodeships of Poland: Lower Silesian, Opole (voivodeship) and Silesian using selected geostatistical methodologies including ordinary kriging [8]. References [1] UNEP. Global Mercury Assessment 2013: Sources, Emissions, Releases and Environmental Transport. UNEP Chemicals Branch, Geneva, Switzerland, 2013. [2] NCEM. Poland's Informative Inventory Report 2014. NCEM at the IEP-NRI, 2014. http

  16. Coal distribution, January--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-17

    The Coal Distribution report provides information on coal production, distribution, and stocks in the United States to a wide audience including Congress, federal and state agencies, the coal industry, and the general public. This issue presents information for January through June 1990. Coal distribution data are shown (in tables 1--34) by coal-producing state of origin, consumer use, method of transportation, and state of destination. 6 figs., 34 tabs.

  17. Identification of hazards for water environment in the Upper Silesian Coal Basin caused by the discharge of salt mine water containing particularly harmful substances and radionuclides

    Directory of Open Access Journals (Sweden)

    Jan Bondaruk

    2015-01-01

    Full Text Available The Upper Silesian urban-industrial agglomeration is one of the most industrialized areas in Europe. The intense industrialization should be attributed mostly to the presence of coal and other minerals deposits and its extraction. Mining areas of hard coal mines comprise approximately 25% of the total catchment area of watercourses in the area of Upper Silesian Coal Basin, including the river basin of the Upper Oder River and the Little Vistula River. The mining, its scope and depth, duration of mining works, extraction systems being used and the total volume of the drainage fundamentally affect the conditions of groundwater and surface water in the studied area. In this paper, an overall characteristics of the coal mining industry in the area of USCB was made, including the issues of its influence on water environment in the light of the requirements of the Water Framework Directive (WFD and its guidelines transposed into Polish law. An analysis of the collected data, obtained from collieries, relating to the quantity and quality of water flowing into the workings and discharged to surface watercourses, was performed. An approach to the requirements for wastewater discharge into the environment by these enterprises was presented regarding the physicochemical parameters, possible harmful substances and radionuclides measured in mine waters. The main goal of the paper is to recognize the condition of surface water bodies in the area of Upper Silesian Coal Basin and to make the assessment of the biological condition using Ecological Risk Assessment and bioindication methods.

  18. Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

    1973-01-01

    The author has identified the following significant results. The 70mm black and white infrared photography acquired in March 1973 at an approximate scale of 1:115,000 permits the identification of areas of mine subsidence not readily evident on other films. This is largely due to the high contrast rendition of water and land by this film and the excessive surface moisture conditions prevalent in the area at the time of photography. Subsided areas consist of shallow depressions which have impounded water. Patterns with a regularity indicative of the room and pillar configuration used in subsurface coal mining are evident.

  19. Rehabilitation of residual pits in post-mining area: a goal of Czech brown coal opencast mining industry

    International Nuclear Information System (INIS)

    Svoboda, I.

    1997-01-01

    The closure of surface brown coal mines is a complex process with many specific considerations. In the Czech Republic a special project was proposed to analyze the types of environmental disturbance generated by surface mining operations and suggest procedures for the affected areas. It also aims to propose rehabilitation techniques for residual pits, considering their future use for recreational or development purposes. A Chabarovice mine case study demonstrates how to solve the problem of water flooding and utilization of the future residual lake. 2 figs

  20. Coal sector model: Source data on coal for the energy and power evaluation program (ENPEP)

    International Nuclear Information System (INIS)

    Suwala, W.

    1997-01-01

    Coal is the major primary energy source in Poland and this circumstances requires that the data on coal supply for use in energy planning models should be prepared properly. Economic sectors' development depends on many factors which are usually considered in energy planning models. Thus, data on the development of such sectors as coal mining should be consistent with the economic assumptions made in the energy planning model. Otherwise, coal data could bias the results of the energy planning model. The coal mining and coal distribution models which have been developed at the Polish Academy of Sciences could provide proper coal data of use in ENPEP and other energy planning models. The coal mining model optimizes the most important decisions related to coal productions, such as coal mines development, retirement of non-profitable mines, and construction of new mines. The model uses basic data forecasts of coal mine costs and coal production. Other factors such as demand for coal, world coal prices, etc., are parameters which constitute constraints and requirements for the coal mining development. The output of the model is the amount of coal produced and supply curves for different coal types. Such data are necessary for the coal distribution model and could also be used by ENPEP. This paper describes the model, its structure and how the results of the model could serve as coal-related data for ENPEP. Improvement of some input data forms of the BALANCE module of ENPEP are also suggested in order to facilitate data preparation. (author). 7 figs

  1. 78 FR 60866 - National Coal Council Meeting

    Science.gov (United States)

    2013-10-02

    ...: Washington Court Hotel, 525 New Jersey Avenue NW., Washington, DC 20001-1527. FOR FURTHER INFORMATION CONTACT... general policy matters relating to coal and the coal industry Purpose of Meeting: The November 2013...

  2. Coal blending preparation for non-carbonized coal briquettes

    Science.gov (United States)

    Widodo; Fatimah, D.; Estiaty, L. M.

    2018-02-01

    Referring to the national energy policy targets for the years 2025, the government has launched the use of coal briquettes as an alternative energy replacement for kerosene and firewood. Non-carbonized briquettes in the form of coal briquettes as well as bio-coal briquettes are used in many small-medium industries and households, and are rarely used by large industries. The standard quality of coal briquettes used as raw material for non-carbonized briquettes is a minimum calorific value of 4,400 kcal/kg (adb); total sulfur at a maximum of 1% (adb), and water content at <12% (adb). The formation of coal deposits depends on the origin of the coal-forming materials (plants), the environment of deposition, and the geological conditions of the surrounding area, so that the coal deposits in each region will be different as well as the amount and also the quality. Therefore, the quantity and the quality of coal in each area are different to be eligible in the making of briquettes to do blending. In addition to the coal blending, it is also necessary to select the right materials in the making of coal briquettes and bio-coal briquettes. The formulation of the right mixture of material in the making of briquettes, can be produced of good quality and environmental friendly.

  3. The Safety Journey: Using a Safety Maturity Model for Safety Planning and Assurance in the UK Coal Mining Industry

    Directory of Open Access Journals (Sweden)

    Patrick Foster

    2013-02-01

    Full Text Available A Safety Maturity Model was developed for use in UK coal mining operations in order to assess the level of compliance and effectiveness with a recently introduced standards based safety management system. The developed model allowed for a “self-assessment” of the maturity to be undertaken by teams from the individual sites. Assessments were undertaken at all sites (surface and underground and in some cases within each site (e.g., underground operations, surface coal preparation plant. Once the level of maturity was established, improvement plans were developed to improve the maturity of individual standards that were weaker than the average and/or improve the maturity as a whole. The model was likened to a journey as there was a strong focus on continual improvement and effectiveness of the standards, rather than pure compliance. The model has been found to be a practical and useful tool by sites as a means of identifying strengths and weaknesses within their systems, and as a means of assurance with the safety management system standards.

  4. Nitrogen removal and microbial community shift in an aerobic denitrification reactor bioaugmented with a Pseudomonas strain for coal-based ethylene glycol industry wastewater treatment.

    Science.gov (United States)

    Du, Cong; Cui, Chong-Wei; Qiu, Shan; Shi, Sheng-Nan; Li, Ang; Ma, Fang

    2017-04-01

    An aerobic denitrification system, initially bioaugmented with Pseudomonas strain T13, was established to treat coal-based ethylene glycol industry wastewater, which contained 3219 ± 86 mg/L total nitrogen (TN) and 1978 ± 14 mg/L NO 3 - -N. In the current study, a stable denitrification efficiency of 53.7 ± 4.7% and nitrite removal efficiency of 40.1 ± 2.7% were achieved at different diluted influent concentrations. Toxicity evaluation showed that a lower toxicity of effluent was achieved when industry wastewater was treated by stuffing biofilm communities compared to suspended communities. Relatively high TN removal (~50%) and chemical oxygen demand removal percentages (>65%) were obtained when the influent concentration was controlled at below 50% of the raw industry wastewater. However, a further increased concentration led to a 20-30% decrease in nitrate and nitrite removal. Microbial network evaluation showed that a reduction in Pseudomonas abundance was induced during the succession of the microbial community. The napA gene analysis indicated that the decrease in nitrate and nitrite removal happened when abundance of Pseudomonas was reduced to less than 10% of the overall stuffing biofilm communities. Meanwhile, other denitrifying bacteria, such as Paracoccus, Brevundimonas, and Brucella, were subsequently enriched through symbiosis in the whole microbial network.

  5. Polish Semantic Parser

    Directory of Open Access Journals (Sweden)

    Agnieszka Grudzinska

    2000-01-01

    Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

  6. Coals of Hungary

    Energy Technology Data Exchange (ETDEWEB)

    Landis, E.R.; Rohrbacher, T.J.; Gluskoter, H.; Fodor, B.; Gombar, G.; Sebestyen, I.

    1999-07-01

    As part of the activities conducted under the U.S. Hungarian Science and Technology Fund, a total of 39 samples from five coal mines in Hungary were selected for standard coal analyses and major, minor and trace elements analysis. The mine areas sampled were selected to provide a spectrum of coal quality information for comparison with other coal areas in central Europe and worldwide. All of the areas are of major importance in the energy budget of Hungary. The five sample sites contain coal in rocks of Jurassic, Cretaceous, Eocene, Miocene, and Pliocene age. The coals, from four underground and one surface mine, range in rank from high volatile bituminous to lignite B. Most of the coal produced from the mines sampled is used to generate electricity. Some of the power plants that utilize the coals also provide heat for domestic and process usage. The standard coal analysis program is based on tests performed in accordance with standards of the American Society for Testing and Materials (ASTM). Proximate and ultimate analyses were supplemented by determinations of the heating value, equilibrium moisture, forms of sulfur, free-swelling index, ash fusion temperatures (both reducing and oxidizing), apparent specific gravity and Hardgrove Grindability index. The major, minor and trace element analyses were performed in accordance with standardized procedures of the U.S. Geological Survey. The analytical results will be available in the International Coal Quality Data Base of the USGS. The results of the program provide data for comparison with test data from Europe and information of value to potential investors or cooperators in the coal industry of Hungary and Central Europe.

  7. Output and utilization of hard coal in Poland

    International Nuclear Information System (INIS)

    Ciszak, E.; Skrzypek, Z.

    1994-01-01

    The forecast of fuel energy consumption structure in Poland and the world until 1999, 2000 and 2001 is presented. Considerable proportion of coal in energy balance of Polish economy will be kept in the nearest future, but it claims to enter the new enterprises, which improves the quality of coals and promote the new pro-ecological technology of coal utilization. 7 refs, 3 figs, 9 tabs

  8. Microbial desulfurization of coal

    International Nuclear Information System (INIS)

    Bos, P.; Boogerd, F.C.; Kuenen, J.G.

    1992-01-01

    In recent years, studies have been initiated to explore the possibilities of the use of biological systems in coal technology. This chapter discusses the principles behind the bioprocessing of coal, the advantages and disadvantages, and the economic feasibility of the process. For large-scale, coal-using, energy-producing plants, stack gas cleaning should be the treatment of choice. Biodesulfurization is preferable with industrial, small-scale, energy-producing plants. Treatment of the stack gases of these plants is not advisable because of high investment costs. Finally, it should be realized that biodesulfurization produces a waste stream that needs further treatment. 91 refs

  9. Electricity production and SO{sub 2} emissions in Poland`s power industry

    Energy Technology Data Exchange (ETDEWEB)

    Salay, J.

    1996-09-01

    The report analyzes how the Polish power industry`s electricity production and SO{sub 2} emissions have changed between 1988 and 1994. It examines to what extent the Polish government`s reform of air pollution control and its reorganization of the power industry affected power plant`s SO{sub 2} emissions in the same period. SO{sub 2} emissions from Polish power plants fell by 37% in 1988-1994. The drop in emissions was partly a result of the fall in economic activity and electricity production in the early 1990s. The main reasons for the emission reduction were the introduction of hard budget constraints, increased coal prices, and stricter enforcement of air pollution control. These reforms created strong incentives for power plants to switch to high-quality coal with lower sulfur content and higher heating value. Improved efficiency of electricity generation also contributed to the fall in SO{sub 2} emissions. 32 refs, 15 figs, 1 tab

  10. Review of a Proposed Quarterly Coal Publication

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This Review of a Proposed Quartery Coal Publication contains findings and recommendations regarding the content of a new summary Energy Information Administration (EIA) coal and coke publication entitled The Quarterly Coal Review (QCR). It is divided into five sections: results of interviews with selected EIA data users; identification of major functions of the coal and coke industries; analysis of coal and coke data collection activities; evaluation of issues conerning data presentation including recommendations for the content of the proposed QCR; and comparison of the proposed QCR with other EIA publications. Major findings and recommendations are as follows: (1) User interviews indicate a definite need for a compehensive publication that would support analyses and examine economic, supply and demand trends in the coal industry; (2) the organization of the publication should reflect the natural order of activities of the coal and coke industries. Based on an analysis of the industries, these functions are: production, stocks, imports, exports, distribution, and consumption; (3) current EIA coal and coke surveys collect sufficient data to provide a summary of the coal and coke industries on a quarterly basis; (4) coal and coke data should be presented separately. Coke data could be presented as an appendix; (5) three geographic aggregations are recommended in the QCR. These are: US total, coal producing districts, and state; (6) coal consumption data should be consolidated into four major consumer categories: electric utilities, coke plants, other industrial, and residential commercial; (7) several EIA publications could be eliminated by the proposed QCR.

  11. Stratified Sampling to Define Levels of Petrographic Variation in Coal Beds: Examples from Indonesia and New Zealand

    Directory of Open Access Journals (Sweden)

    Tim A. Moore

    2016-01-01

    Full Text Available DOI: 10.17014/ijog.3.1.29-51Stratified sampling of coal seams for petrographic analysis using block samples is a viable alternative to standard methods of channel sampling and particulate pellet mounts. Although petrographic analysis of particulate pellets is employed widely, it is both time consuming and does not allow variation within sampling units to be assessed - an important measure in any study whether it be for paleoenvironmental reconstruction or in obtaining estimates of industrial attributes. Also, samples taken as intact blocks provide additional information, such as texture and botanical affinity that cannot be gained using particulate pellets. Stratified sampling can be employed both on ‘fine’ and ‘coarse’ grained coal units. Fine-grained coals are defined as those coal intervals that do not contain vitrain bands greater than approximately 1 mm in thickness (as measured perpendicular to bedding. In fine-grained coal seams, a reasonable sized block sample (with a polished surface area of ~3 cm2 can be taken that encapsulates the macroscopic variability. However, for coarse-grained coals (vitrain bands >1 mm a different system has to be employed in order to accurately account for the larger particles. Macroscopic point counting of vitrain bands can accurately account for those particles>1 mm within a coal interval. This point counting method is conducted using something as simple as string on a coal face with marked intervals greater than the largest particle expected to be encountered (although new technologies are being developed to capture this type of information digitally. Comparative analyses of particulate pellets and blocks on the same interval show less than 6% variation between the two sample types when blocks are recalculated to include macroscopic counts of vitrain. Therefore even in coarse-grained coals, stratified sampling can be used effectively and representatively.

  12. Advanced method for the characterization of polishing suspensions

    Science.gov (United States)

    Trum, Christian J.; Sitzberger, Sebastian; Rascher, Rolf

    2017-06-01

    The industrial production of components for applications in the area of precision optics has a long-standing tradition in Germany. As in almost all branches of industry, the external circumstances, processes and products have changed over time. Large lots are becoming less frequent and the demand for special components is growing. In order to meet these requirements, it is necessary to adapt the production processes quickly and flexibly. In the field of chemo-mechanical polishing (CMP), this means that in addition to the process parameters such as speed, pressure and feed, the task-specific adaptation of suspension and polishing pad carriers gain in importance. Along with these changes, it is becoming increasingly important to compare and evaluate the properties of the various polishing suspensions. The procedures according to DIN 58750-3 and DIN 58750-4 are suitable for this purpose. Due to the clearly defined procedures and the constant boundary conditions, different suspensions can be compared and evaluated. The study presented here shows that this method can also lead to misinterpretations. Known relationships, such as the influence of the polishing pad, the concentration of the suspension and the influence of the processed materials play an important role. An extension of the procedure of DIN 58750-3 for the test of a polishing agent can help in a task-specific characterization of polishing slurries.

  13. Bright outlook for coal

    International Nuclear Information System (INIS)

    Anon

    2001-01-01

    After enduring contract price cuts over the past two years of almost 17% for thermal coal and 23% for hard coking coal, the New South Wales coal industry is looking forward to a reversal of fortune for 2001. Increased export demand, improved prices, significant improvements in mine site productivity, a weak Australian dollar and the probability of a number of new projects or extensions progressing to development are likely to result in an increase in NSW saleable production to around 110 million tonnes (Mt) in 2000-01. Sharply weaker coal prices over the past two years, intensified international competition and the Asian economic downturn had a negative impact on profitability, investment, exports and employment in the NSW coal industry. As a result, the industry has undergone substantial restructuring. The restructuring process has led to a consolidation in ownership, reduced production costs and improved operational efficiency. The outcome is an industry well positioned to take advantage of the positive market conditions and one likely to experience levels of profitability not achieved over the past few years

  14. Coal mining situation in the Federal Republic of Germany. Year 2015

    International Nuclear Information System (INIS)

    2016-01-01

    The paper reports on the coal mining in the Federal Republic of Germany in the year 2015. Statistical data are presented for coal market, brown coal mining as well as the hard coal mining. These data consider the supply and demand of coal in Germany, and employees of the German coal industry.

  15. Coal mining situation in the Federal Republic of Germany. Year 2016

    International Nuclear Information System (INIS)

    2017-01-01

    The paper reports on the coal mining in the Federal Republic of Germany in the year 2016. Statistical data are presented for coal market, brown coal mining as well as the hard coal mining. These data consider the supply and demand of coal in Germany, and employees of the German coal industry.

  16. Situation of coal mining in the Federal Republic of Germany. Year 2014

    International Nuclear Information System (INIS)

    2015-01-01

    The paper reports on the coal mining in the Federal Republic of Germany in the year 2014. Statistical data are presented for coal market, brown coal mining as well as the hard coal mining. These data consider the supply and demand of coal in Germany, and employees of the German coal industry.

  17. Bio-coal briquettes using low-grade coal

    Science.gov (United States)

    Estiaty, L. M.; Fatimah, D.; Widodo

    2018-02-01

    The technology in using briquettes for fuel has been widely used in many countries for both domestic and industrial purposes. Common types of briquette used are coal, peat, charcoal, and biomass. Several researches have been carried out in regards to the production and the use of briquettes. Recently, researches show that mixing coal and biomass will result in an environmentally friendly briquette with better combustion and physical characteristics. This type of briquette is known as bio-coal briquettes. Bio-coal briquettes are made from agriculture waste and coal, which are readily available, cheap and affordable. Researchers make these bio-coal briquettes with different aims and objectives, depending on the issues to address, e.g. utilizing agricultural waste as an alternative energy to replace fossil fuels that are depleting its reserves, adding coal to biomass in order to add calorific value to bio-coal briquette, and adding biomass to coal to improve its chemical and physical properties. In our research, biocoal briquettes are made to utilize low grade coal. The biomass we use, however, is different from the ones used in past researches because it has undergone fermentation. The benefits of using such biomass are 1. Fermentation turns the hemi cellulose into a simpler form, so that the burning activation energy decreases while the calorific value increases. 2. Enzym produced will bind to heavy metals from coal as co-factors, forming metals that are environmentally friendly.

  18. Utilisation of chemically treated coal

    Directory of Open Access Journals (Sweden)

    Bežovská Mária

    2002-03-01

    Full Text Available The numerous application of coal with high content of humic substances are known. They are used in many branches of industry. The complex study of the composition of coal from upper Nitra mines has directed research to its application in the field of ecology and agriculture. The effective sorption layers of this coal and their humic acids can to trap a broad spectrum of toxic harmful substances present in industrial wastes, particularly heavy metals. A major source of humic acids is coal - the most abundant and predominant product of plant residue coalification. All ranks of coal containt humic acids but lignite from Nováky deposit represents the most easily available and concentrated form of humic acids. Deep oxidation of coal by HNO3 oxidation - degradation has been performed to produce water-soluble-organic acids. The possibilities of utilisation of oxidised coal and humic acids to remove heavy metals from waste waters was studied. The residual concentrations of the investigated metals in the aqueous phase were determined by AAs. From the results follows that the samples of oxidised coal and theirs humic acids can be used for the heavy metal removal from metal solutions and the real acid mine water.Oxidised coal with a high content of humic acids and nitrogen is used in agriculture a fertilizer. Humic acids are active component in coal and help to utilize almost quantitatively nitrogen in soil. The humic substances block and stabiliz toxic metal residues already present in soil.

  19. 100 years of the main mine rescue service. A contribution to the protection against disasters in the coal mining industry; 100 Jahre Hauptstelle fuer das Grubenrettungswesen. Ein Beitrag zum Katastrophenschutz im Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Hermuelheim, Walter [RAG Aktiengesellschaft, Herne (Germany). Zentralbereich Arbeits-, Gesundheits- und Umweltschutz

    2011-06-15

    A review of 100 years of protection against disasters in the coal mining industry impressively shows the way from an era of major accidents to a modern branch of industry, which justifiably and with good prospects of success can pursue the aim of ''No accidents - no damage to health - no damage to the environment''. However, the development of the mine rescue service over more than 100 years - represented in the Ruhr by the Main Mine Rescue Service established in 1910 in Essen - would be incomplete without consideration of the allied technical fields underground fire protection and explosion protection. Cooperation between institutions such as the Tremonia test mine and the BVG has produced a safety level in all three fields, which is regarded as exemplary worldwide, and in addition to the latest mining technology is a good advertisement for the German coal mining industry. (orig.)

  20. Application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. The most important result to date is the demonstration of the special value of repetitive ERTS-1 multiband coverage for detecting previously unknown fracture lineaments despite the presence of a deep glacial overburden. The Illinois Basin is largely covered with glacial drift and few rock outcrops are present. A contribution to the geological understanding of Illinois and Indiana has been made. Analysis of ERTS-1 imagery has provided useful information to the State of Indiana concerning the surface mined lands. The contrast between healthy vegetation and bare ground as imaged by Band 7 is sharp and substantial detail can be obtained concerning the extent of disturbed lands, associated water bodies, large haul roads, and extent of mined lands revegetation. Preliminary results of analysis suggest a reasonable correlation between image-detected fractures and mine roof fall accidents for a few areas investigated. ERTS-1 applications to surface mining operations appear probable, but further investigations are required. The likelihood of applying ERTS-1 derived fracture data to improve coal mine safety in the entire Illinois Basin is suggested from studies conducted in Indiana.

  1. Geochemical Characteristics of the Bismuth and Antimony Occurrence in Some Coal Seams in the Lublin Coal Basin (LCB)

    Science.gov (United States)

    Parzentny, Henryk R.; Róg, Leokadia

    2017-06-01

    The study included 24 samples of coal with 7 cores, boreholes (7 coal seams), made by the Polish Geological Institute in Warsaw at the site of a Chelm field and 6 coal samples taken from 2 decks in the Lublin Coal mine "Bogdanka" S.A. in LCB. Based on performed tests found generally low levels of Sb and Bi in coal. In the vertical profile of the LCB contents of Bi and Sb in coal generally increases from coal seams younger to older age. Content of Bi in coal from roof part coal seams is usually higher, and ash content in the coal content of Sb are generally lower than in the carbon of the middle part decks. The content of Bi in the lateral coal deposits is unlikely to vary, and the gap in the coal content of Bi between the sampling regions coal do not exceed 1.7 g / Mg. In contrast gap Sb content in coal on the extent LCB is from 1.7 g / Mg of 5.8 g / Mg. The biggest influence on the content of Bi and Sb in coal from the LCB is probably organic matter in which these elements are scattered and do not form their own minerals.

  2. China's coal export and inspection

    International Nuclear Information System (INIS)

    Xiaodong Li

    1993-01-01

    With the development of world's business and trade, coal has become a large part of the import and export goods in the international market. The total amount of coal trade has risen a lot. China is rich in coal resources. According to the estimate made by some experts, the reserve which has been explored recently could be exploited hundreds of years. China's output of raw coal has risen a lot during the past forty years. China coal industry has developed rapidly since the 1980s. It is possible for China to become a big coal export country since it has rich resources and increasing output. The paper suggests four steps which must be taken to expand coal exports in China: improve the level of management and administration of coal mines so as to raise the economic benefit; the follow-up production capacity of the present mines must be enhanced rapidly; step up construction of new large-scale mines; and China's coal washing capacity must be improved speedily since the low capacity has seriously influenced the improvement of coal quality. The paper describes the inspection bureaus and companies that have developed to perform inspection of exports in order to guarantee the quality of export coal

  3. National Coal Quality Inventory (NACQI)

    Energy Technology Data Exchange (ETDEWEB)

    Robert Finkelman

    2005-09-30

    The U.S. Geological Survey (USGS) conducted the National Coal Quality Inventory (NaCQI) between 1999 and 2005 to address a need for quality information on coals that will be mined during the next 20-30 years. Collaboration between the USGS, State geological surveys, universities, coal burning utilities, and the coal mining industry plus funding support from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) permitted collection and submittal of coal samples for analysis. The chemical data (proximate and ultimate analyses; major, minor and trace element concentrations) for 729 samples of raw or prepared coal, coal associated shale, and coal combustion products (fly ash, hopper ash, bottom ash and gypsum) from nine coal producing States are included. In addition, the project identified a new coal reference analytical standard, to be designated CWE-1 (West Elk Mine, Gunnison County, Colorado) that is a high-volatile-B or high-volatile-A bituminous coal with low contents of ash yield and sulfur, and very low, but detectable contents of chlorine, mercury and other trace elements.

  4. Coal-to-liquids: Potential impact on U.S. coal reserves

    Science.gov (United States)

    Milici, R.C.

    2009-01-01

    The production of liquid fuels from coal will very likely become an important part of the hydrocarbon energy mix of the future, provided that technical and environmental obstacles are overcome economically. The coal industry should be able to handle a coal-to-liquids (CTL) industry of modest size, using 60-70 million short tons or 54-64 million metric tonnes of coal per annum, without premature depletion of the country's coal reserves. However, attempts to use CTL technology to replace all petroleum imports would deplete the nation's coal reserves by the end of the century. ?? 2009 U.S. Government.

  5. The revolutionary importance of coal

    OpenAIRE

    Macfarlane, Alan

    2004-01-01

    Alan Macfarlane discusses the coal revolution, the change from energy harvested from the sun through plants and animals, to the stored carbon energy of millions of years of sunlight. Filmed on a coal heap in Coalbrookdale, where the industrial revolution in England began.

  6. [Lysenkoism in Polish botany].

    Science.gov (United States)

    Köhler, Piotr

    2008-01-01

    Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

  7. Quarterly coal report

    Energy Technology Data Exchange (ETDEWEB)

    Young, P.

    1996-05-01

    The Quarterly Coal Report (QCR) provides comprehensive information about U.S. coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. The data presented in the QCR are collected and published by the Energy Information Administration (EIA) to fulfill data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275), as amended. This report presents detailed quarterly data for October through December 1995 and aggregated quarterly historical data for 1987 through the third quarter of 1995. Appendix A displays, from 1987 on, detailed quarterly historical coal imports data, as specified in Section 202 of the Energy Policy and Conservation Amendments Act of 1985 (Public Law 99-58). Appendix B gives selected quarterly tables converted to metric tons.

  8. The production of high load coal-water mixtures on the base of Kansk-Achinsk Coal Basin

    Energy Technology Data Exchange (ETDEWEB)

    Demidov, Y.; Bruer, G.; Kolesnikova, S. [Research and Design Institute for Problems of Development of Kansk-Achinsk Coal Basin (KATEKNilugol), Krasnoyarsk (Russian Federation)

    1995-12-01

    The results of the {open_quotes}KATEKNIIugol{close_quotes} work on the problems of high load coal-water mixtures are given in this article. General principles of the mixture production, short characteristics of Kansk-Achinsk coals, the experimental results of the coal mixture production on a test-industrial scale, the suspension preparation on the base of coal mixtures, technical-economical indexes of tested coal pipeline variants based on Kansk-Achinsk coals are described.

  9. Connect the Spheres with the Coal Cycle

    Science.gov (United States)

    Clary, Renee; Wandersee, James

    2010-01-01

    Coal fueled the Industrial Revolution and, as a result, changed the course of human history. However, the geologic history of coal is much, much longer than that which is recorded by humans. In your classroom, the coal cycle can be used to trace the formation of this important economic resource from its plant origins, through its lithification, or…

  10. Method selection for mercury removal from hard coal

    Directory of Open Access Journals (Sweden)

    Dziok Tadeusz

    2017-01-01

    Full Text Available Mercury is commonly found in coal and the coal utilization processes constitute one of the main sources of mercury emission to the environment. This issue is particularly important for Poland, because the Polish energy production sector is based on brown and hard coal. The forecasts show that this trend in energy production will continue in the coming years. At the time of the emission limits introduction, methods of reducing the mercury emission will have to be implemented in Poland. Mercury emission can be reduced as a result of using coal with a relatively low mercury content. In the case of the absence of such coals, the methods of mercury removal from coal can be implemented. The currently used and developing methods include the coal cleaning process (both the coal washing and the dry deshaling as well as the thermal pretreatment of coal (mild pyrolysis. The effectiveness of these methods various for different coals, which is caused by the diversity of coal origin, various characteristics of coal and, especially, by the various modes of mercury occurrence in coal. It should be mentioned that the coal cleaning process allows for the removal of mercury occurring in mineral matter, mainly in pyrite. The thermal pretreatment of coal allows for the removal of mercury occurring in organic matter as well as in the inorganic constituents characterized by a low temperature of mercury release. In this paper, the guidelines for the selection of mercury removal method from hard coal were presented. The guidelines were developed taking into consideration: the effectiveness of mercury removal from coal in the process of coal cleaning and thermal pretreatment, the synergy effect resulting from the combination of these processes, the direction of coal utilization as well as the influence of these processes on coal properties.

  11. The Global Value of Coal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Coal plays an essential role in our global energy mix, particularly for power generation; and through that to the alleviation of energy poverty. The use of coal continues to grow rapidly and will continue, together with other fuels, to support world economic and social development particularly in rapidly developing world economies such as China and India. The purpose of this paper is to highlight for policy makers the value of coal to world economic and social development and so encourage development of a policy environment that will allow the coal and electricity industries to make the necessary investments in production capacity and CO2 emissions reduction technologies.

  12. Subjective Quality of Life of Polish, Polish-Immigrant, and Polish-American Elderly.

    Science.gov (United States)

    Berdes, Celia; Zych, Adam A.

    2000-01-01

    Compares subjective quality of life of elderly Poles living in Poland, and Polish immigrants and Polish-American ethnics living in Chicago as part of a secondary data analysis of a study initially conducted in Poland. Conclusions lend support to the idea that U.S.-born elderly people and elderly immigrants to the United States have a significantly…

  13. Buckets of money for coal

    International Nuclear Information System (INIS)

    Anon

    2001-01-01

    The revival of coal prices is providing record profits for Australian coal producers. As the world's largest coal exporter, any move in coal prices has significant ramifications for the Australian economy. The coal boom of the mid-1980s resulted in a massive increase in mine capacity and subsequently excess supply. This resulted in the decade between 1990 and 2000 seeing benchmark prices for coking coal in Japan plummeting to $US 39 a tonne (down from around the $US 52 mark) and a price of $US 28 for a tonne of steaming coal. Asia's financial problems, late in the decade coupled with a rapid fall in Asian steel making, also added to our coal export woes. As a result for most of the 1990s, Australia's coal sector delivered inadequate returns, was seen as over-capitalised and suffered from a profound investor indifference. But the sector is now seeing a definite turnaround in fortunes. Prices for thermal coal are on the rise and the benchmark coking coal prices to Asia have also jumped. Market analysts reported the price for contract deliveries of thermal coal in April this year were $US 34.50 ($AUD 69.35) up by $US 5.75 from the same time last year. The increased production is expected on the back of a continued rise in export demand, further improvement in prices, significant improvements in mine productivity, a weak Australian dollar and the probability of new projects and mine extensions going into operation. The improved returns have also flowed into rising valuations for listed coal miners. Over the last year, coal miners such as MIM and Gympie Gold, have delighted in share price gains of 12 per cent and 55 per cent respectively. These sort of performances are being repeated across the Australian industry

  14. U.S. coal outlook in Asia

    International Nuclear Information System (INIS)

    Johnson, C.J.

    1997-02-01

    Coal exports from the US to Asia are declining over time as a result of (1) increased competition from coal suppliers within the Asia-Pacific region, (2) changing steel making technologies, (3) decreased emphasis on security of coal supplies, and (4) deregulation of the energy industry--particularly electric utilities. There are no major changes on the horizon that are likely to alter the role of the US as a modest coal supplier to the Asia-Pacific region. The downward trend in US coal exports to Asia is expected to continue over the 1997--2010 period. But economic and policy changes underway in Asia are likely to result in periodic coal shortages, lasting a few months to a year, and short term increased export opportunities for US coal. US coal exports to Asia are projected to fluctuate within the following ranges over the 2000--2010 period: 10--17 million tons in total exports, 6--12 million tons in thermal coal exports, and 4--9 million tons in coking coal exports. The most important role for US coal, from the perspective of Asian coal importing countries, is to ensure a major alternative source of coal supplies that can be turned to in the event of unforeseen disruptions in coal supplies from the Asia-Pacific region or South Africa. However, the willingness of consumers to pay a premium to ensure US export capacity is declining, with increased emphasis on obtaining the lowest cost coal supplies

  15. The Chemicals, Coal and Petroleum Products, and Rubber Industries in Italy's Regions, 1861-1913: Time-Series Estimates

    OpenAIRE

    Ciccarelli Carlo; Fenoaltea Stefano

    2008-01-01

    Questo saggio presenta stime annuali della produzione delle industrie chimiche e affini nell'Italia post-unitaria, disaggregate per regione e per industria. Nel lungo periodo la produzione si concentra, e si sposta verso nord. La crescita più rapida si registra dai primi anni settanta ai primi anni novanta in Piemonte e in Lombardia, e poi, fino al 1913, in Liguria, in Toscana, e (grazie alla sua elettrochimica) in Umbria. Le regioni meridionali erano dominanti all'Unità; registrarono poi una...

  16. Removing heavy metals from wastewaters with use of shales accompanying the coal beds.

    Science.gov (United States)

    Jabłońska, Beata; Siedlecka, Ewa

    2015-05-15

    A possibility of using clay waste rocks (shales) from coal mines in the removal of heavy metals from industrial wastewaters is considered in this paper. Raw and calcined (600 °C) shales accompanying the coal beds in two Polish coal mines were examined with respect to their adsorptive capabilities for Pb, Ni and Cu ions. The mineralogical composition of the shales was determined and the TG/DTG analysis was carried out. The granulometric compositions of raw and calcined shales were compared. Tests of adsorption for various Pb(II), Ni(II) and Cu(II) concentrations were conducted and the pH before and after adsorption was analyzed. The results indicate that the shales from both coal mines differ in adsorptive capabilities for particular metal ions. The calcination improved the adsorptive capabilities for lead, but worsened them for nickel. The examined shales have good adsorptive capabilities, and could be used as inexpensive adsorbents of heavy metal ions, especially in the regions where resources of shale are easy accessible in the form of spoil tips. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Coal-Based Oxy-Fuel System Evaluation and Combustor Development; Oxy-Fuel Turbomachinery Development for Energy Intensive Industrial Applications

    Energy Technology Data Exchange (ETDEWEB)

    Hollis, Rebecca

    2013-03-31

    Clean Energy Systems, Inc. (CES) partnered with the U.S. Department of Energy’s National Energy Technology Laboratory in 2005 to study and develop a competing technology for use in future fossil-fueled power generation facilities that could operate with near zero emissions. CES’s background in oxy-fuel (O-F) rocket technology lead to the award of Cooperative Agreement DE-FC26-05NT42645, “Coal-Based Oxy-Fuel System Evaluation and Combustor Development,” where CES was to first evaluate the potential of these O-F power cycles, then develop the detailed design of a commercial-scale O-F combustor for use in these clean burning fossil-fueled plants. Throughout the studies, CES found that in order to operate at competitive cycle efficiencies a high-temperature intermediate pressure turbine was required. This led to an extension of the Agreement for, “Oxy-Fuel Turbomachinery Development for Energy Intensive Industrial Applications” where CES was to also develop an intermediate-pressure O-F turbine (OFT) that could be deployed in O-F industrial plants that capture and sequester >99% of produced CO2, at competitive cycle efficiencies using diverse fuels. The following report details CES’ activities from October 2005 through March 2013, to evaluate O-F power cycles, develop and validate detailed designs of O-F combustors (main and reheat), and to design, manufacture, and test a commercial-scale OFT, under the three-phase Cooperative Agreement.

  18. The Impact of Variability of Selected Geological and Mining Parameters on the Value and Risks of Projects in the Hard Coal Mining Industry

    Science.gov (United States)

    Kopacz, Michał

    2017-09-01

    The paper attempts to assess the impact of variability of selected geological (deposit) parameters on the value and risks of projects in the hard coal mining industry. The study was based on simulated discounted cash flow analysis, while the results were verified for three existing bituminous coal seams. The Monte Carlo simulation was based on nonparametric bootstrap method, while correlations between individual deposit parameters were replicated with use of an empirical copula. The calculations take into account the uncertainty towards the parameters of empirical distributions of the deposit variables. The Net Present Value (NPV) and the Internal Rate of Return (IRR) were selected as the main measures of value and risk, respectively. The impact of volatility and correlation of deposit parameters were analyzed in two aspects, by identifying the overall effect of the correlated variability of the parameters and the indywidual impact of the correlation on the NPV and IRR. For this purpose, a differential approach, allowing determining the value of the possible errors in calculation of these measures in numerical terms, has been used. Based on the study it can be concluded that the mean value of the overall effect of the variability does not exceed 11.8% of NPV and 2.4 percentage points of IRR. Neglecting the correlations results in overestimating the NPV and the IRR by up to 4.4%, and 0.4 percentage point respectively. It should be noted, however, that the differences in NPV and IRR values can vary significantly, while their interpretation depends on the likelihood of implementation. Generalizing the obtained results, based on the average values, the maximum value of the risk premium in the given calculation conditions of the "X" deposit, and the correspondingly large datasets (greater than 2500), should not be higher than 2.4 percentage points. The impact of the analyzed geological parameters on the NPV and IRR depends primarily on their co-existence, which can be

  19. Mineral potential of Malawai. 3. Mineral deposits associated with sedimentary and volcanic cover rocks: Karoo and post-Karoo (coal, uranium, industrial minerals and gemstone)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This report was produced for the Ministry of Energy and Mines of Malawi. It gives information and maps of uranium deposits, coal deposits, coal-bed methane, natural gas and helium potential, limestone deposits and gemstones (blue agate, chalcedony and kimerlites, the primary source of diamonds). 2 figs., 2 tabs., 4 maps, 5 photos.

  20. Industrialization

    African Journals Online (AJOL)

    Lucy

    importantly exploiting cheap labour for industrial purposes from the native population. 13 . During the colonial era manufacturing in the continent was generally at the handicraft and small scale levels. In some colonies this was supplemented by some relatively complex industries producing mainly for export, but also ...

  1. Tooth polishing: The current status

    Directory of Open Access Journals (Sweden)

    Madhuri Alankar Sawai

    2015-01-01

    Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  2. Lysenko affair and Polish botany.

    Science.gov (United States)

    Köhler, Piotr

    2011-01-01

    This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

  3. Effect of alkalinity on nitrite accumulation in treatment of coal chemical industry wastewater using moving bed biofilm reactor.

    Science.gov (United States)

    Hou, Baolin; Han, Hongjun; Jia, Shengyong; Zhuang, Haifeng; Zhao, Qian; Xu, Peng

    2014-05-01

    Nitrogen removal via nitrite (the nitrite pathway) is more suitable for carbon-limited industrial wastewater. Partial nitrification to nitrite is the primary step to achieve nitrogen removal via nitrite. The effect of alkalinity on nitrite accumulation in a continuous process was investigated by progressively increasing the alkalinity dosage ratio (amount of alkalinity to ammonia ratio, mol/mol). There is a close relationship among alkalinity, pH and the state of matter present in aqueous solution. When alkalinity was insufficient (compared to the theoretical alkalinity amount), ammonia removal efficiency increased first and then decreased at each alkalinity dosage ratio, with an abrupt removal efficiency peak. Generally, ammonia removal efficiency rose with increasing alkalinity dosage ratio. Ammonia removal efficiency reached to 88% from 23% when alkalinity addition was sufficient. Nitrite accumulation could be achieved by inhibiting nitrite oxidizing bacteria (NOB) by free ammonia (FA) in the early period and free nitrous acid in the later period of nitrification when alkalinity was not adequate. Only FA worked to inhibit the activity of NOB when alkalinity addition was sufficient. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  4. Behaviour of radium isotopes released with brines and sediments from coal mines in Poland

    International Nuclear Information System (INIS)

    Wysocka, M.; Chalupnik, S.; Mielnikow, A.; Lebecka, J.; Skubacz, K.

    1998-01-01

    Saline waters occurring in underground coal mines in Poland often contain natural radioactive isotopes, mainly 226 Ra from uranium series and 228 Ra from thorium series. Approximately 40% of total amount of radium remains underground in a form of radioactive deposits, but 225 MBq of 226 Ra and 380 MBq of 228 Ra are released daily to the rivers with mine effluents. Technical measures as spontaneous precipitation of radium in gobs, decreasing of amounts of water inflowing into underground working etc. have been undertaken in several coal mines and in the result total amount of radium released to the surface waters diminished by about 60% during last 5-6 years. Mine waters can cause a severe impact on the natural environment. The enhancement of radium concentration in river waters, bottom sediments and vegetation is observed. Sometimes radium concentration in rivers exceeds 0.7 kBq/m 3 , which is due to Polish law a permissible level for liquid radioactive waste. It was necessary to undertake investigations for development the methods of the purification of mine waters from radium. The radium balance in effluents has been calculated and a map of radioactive contamination of river waters have been prepared. Solid wastes with enhanced natural radioactivity have been produced in huge amounts in energy and coal industries in Poland. There are two main sources of these waste products. As a result of combustion of coal in power plants low radioactive waste materials are produced, with 226 Ra concentration seldom exceeding few hundreds of Bq/kg. Different situation is be observed in coal mines, where as a result of precipitation of radium from radium-bearing waters radioactive deposits are formed. Sometimes natural radioactivity of such materials is very high, in case of scaling from coal mines radium concentration may reach 4x10 5 Bq/kg - similar activity as for 3% uranium ore. Therefore maintenance of solid waste with technologically enhanced natural radioactivity (TENR

  5. British coal-down to the line

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The long-running saga of British Coal's decline is in its final stages with virtually no change from last October when the British government announced plants to close 31 of the 50 remaining mines. That announcement produced a political outcry but having privatized the electricity industry in 1990 the government had effectively left itself up the creek without a paddle. It had no powers to force the generators to buy more coal. The status of the British coal industry is discussed

  6. Geomorphology of coal seam fires

    Science.gov (United States)

    Kuenzer, Claudia; Stracher, Glenn B.

    2012-02-01

    Coal fires occur in underground natural coal seams, in exposed surface seams, and in coal storage or waste piles. The fires ignite through spontaneous combustion or natural or anthropogenic causes. They are reported from China, India, USA, South Africa, Australia, and Russia, as well as many other countries. Coal fires lead to loss of a valuable resource (coal), the emission of greenhouse-relevant and toxic gases, and vegetation deterioration. A dangerous aspect of the fires is the threat to local mines, industries, and settlements through the volume loss underground. Surface collapse in coal fire areas is common. Thus, coal fires are significantly affecting the evolution of the landscape. Based on more than a decade of experience with in situ mapping of coal fire areas worldwide, a general classification system for coal fires is presented. Furthermore, coal seam fire geomorphology is explained in detail. The major landforms associated with, and induced by, these fires are presented. The landforms include manifestations resulting from bedrock surface fracturing, such as fissures, cracks, funnels, vents, and sponges. Further manifestations resulting from surface bedrock subsidence include sinkholes, trenches, depressions, partial surface subsidence, large surface subsidence, and slides. Additional geomorphologic coal fire manifestations include exposed ash layers, pyrometamorphic rocks, and fumarolic minerals. The origin, evolution, and possible future development of these features are explained, and examples from in situ surveys, as well as from high-resolution satellite data analyses, are presented. The geomorphology of coal fires has not been presented in a systematic manner. Knowledge of coal fire geomorphology enables the detection of underground coal fires based on distinct surface manifestations. Furthermore, it allows judgments about the safety of coal fire-affected terrain. Additionally, geomorphologic features are indicators of the burning stage of fires

  7. Elastic emission polishing

    Energy Technology Data Exchange (ETDEWEB)

    Loewenthal, M.; Loseke, K.; Dow, T.A.; Scattergood, R.O.

    1988-12-01

    Elastic emission polishing, also called elastic emission machining (EEM), is a process where a stream of abrasive slurry is used to remove material from a substrate and produce damage free surfaces with controlled surface form. It is a noncontacting method utilizing a thick elasto-hydrodynamic film formed between a soft rotating ball and the workpiece to control the flow of the abrasive. An apparatus was built in the Center, which consists of a stationary spindle, a two-axis table for the workpiece, and a pump to circulate the working fluid. The process is controlled by a programmable computer numerical controller (CNC), which presently can operate the spindle speed and movement of the workpiece in one axis only. This apparatus has been used to determine material removal rates on different material samples as a function of time, utilizing zirconium oxide (ZrO{sub 2}) particles suspended in distilled water as the working fluid. By continuing a study of removal rates the process should become predictable, and thus create a new, effective, yet simple tool for ultra-precision mechanical machining of surfaces.

  8. THE POLISH RECIPE

    Directory of Open Access Journals (Sweden)

    D.F. Spinu

    2017-06-01

    Full Text Available Twenty-six years ago the international community witnessed one of the most dramatic changes in economic systems. Naturally, the fall of communism in Eastern Europe and its consequences were events difficult to judge and anticipate in their immediate aftermath. Today, we have gained a much more coherent perspective on their meaning. The political liberalization of Poland in 1989 and its transition to the market economy was generally perceived as the most successful of all post-communist countries. From 1990 to 2013, Poland experienced the most outstanding economic growth within the former communist bloc. It doubled its GDP in real terms and became the only country to experience economic growth during the financial crisis of 2008-09. However, the polish secret recipe lies in the "shock therapy" adopted at the beginning of the 90's. The aim of this paper is to examine the importance of the Balcerowicz's program in creating the basis for economic stability and growth through privatization, liberalization of foreign trade, monetary reform and an open economy. We will also review the impact of this unprecedented transformation in shaping a strong, market-oriented economy.

  9. The future of coal trading. Part 1: obstacles to coal trading

    International Nuclear Information System (INIS)

    Schafer, W.; Vaninetti, J.

    1998-01-01

    'Trading' as used in this article means routine buying and selling of futures contracts or options and other derivatives of future contracts. The variable nature of coal, lack of liquidity, and the coal industry's understanding and acceptance of commodity trading concepts are identified as three major barriers to successful trading of a coal futures contract. The article discusses these obstacles

  10. Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

    Directory of Open Access Journals (Sweden)

    Weingaertner, W. L.

    2010-10-01

    Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

    El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

  11. Constructive explosion protection in the energy industry. Example explosion suppression at a coal grinding plant of RWE AG; Konstruktiver Explosionsschutz in der Energiebranche. Beispiel Explosionsunterdrueckung bei einer Kohlemahlanlage der RWE AG

    Energy Technology Data Exchange (ETDEWEB)

    Welsch, Matthias [Fike Deutschland, Mannheim (Germany)

    2011-09-15

    In the energy sector and especially in the power generation, excess pressure control as well as explosion protection are a historically grown theme in the range of process safty. Beginning with the industrial use of the steam engine, it has come to events again and again that are associated with explosions and associated with damages to property and persons. In the Westphalian Ibbenbueren (Federal Republic of Germany), RWE Power AG (Essen, Federal Republic of Germany) operates a hard-coal fired power plant at which power is generated primarily from the anthracite coal from the mine Ibbenbueren. Within an optimization process it was decided to mix brown coal as an additive to anthracite coal in order to improve the ignition properties. The principle of action in the suppression of explosions is subject to three parallel acting mechanisms: (a) The inert dust absorbs thermal energy; (b) Effect of inertisation; (c) Anticatalytic effect. The author of the contribution under consideration reports on a HRD-extinguishing agent containers from Fike Germany (Mannheim, Federal Republic of Germany). The benefits of this explosion protection system are: (a) The maintenance personnel only may enter the grinding plants when the extinguishing agent containers were locked manually; (b) Lower maintenance costs in comparison to other explosion protection systems; (c) Favourable and quick repair; (c) Very fast transport of the extinguishing powder to the site of explosion.

  12. Industrialization

    African Journals Online (AJOL)

    Lucy

    . African states as ... regarded as the most important ingredients that went to add value to land and labour in order for countries ... B. Sutcliffe Industry and Underdevelopment (Massachusetts Addison – Wesley Publishing Company. 1971), pp.

  13. Industrialization

    OpenAIRE

    Blundel, Richard

    2016-01-01

    Industrialization, the historical development that saw cheesemaking transformed from a largely craft-based or artisanal activity, often located on a dairy farm, to a production process that, for the most part, takes place in large ‘cheese factories’ or creameries [See ARTISANAL]. The principal features of modern industrialized cheesemaking, which set it apart from traditional approaches include: high production volumes; sourcing of milk from multiple dairy herds; pasteurization and re-balanci...

  14. Chemical analyses of coal, coal-associated rocks and coal combustion products collected for the National Coal Quality Inventory

    Science.gov (United States)

    Hatch, Joseph R.; Bullock, John H.; Finkelman, Robert B.

    2006-01-01

    In 1999, the USGS initiated the National Coal Quality Inventory (NaCQI) project to address a need for quality information on coals that will be mined during the next 20-30 years. At the time this project was initiated, the publicly available USGS coal quality data was based on samples primarily collected and analyzed between 1973 and 1985. The primary objective of NaCQI was to create a database containing comprehensive, accurate and accessible chemical information on the quality of mined and prepared United States coals and their combustion byproducts. This objective was to be accomplished through maintaining the existing publicly available coal quality database, expanding the database through the acquisition of new samples from priority areas, and analysis of the samples using updated coal analytical chemistry procedures. Priorities for sampling include those areas where future sources of compliance coal are federally owned. This project was a cooperative effort between the U.S. Geological Survey (USGS), State geological surveys, universities, coal burning utilities, and the coal mining industry. Funding support came from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE).

  15. Coal, energy and environment: Proceedings

    International Nuclear Information System (INIS)

    Mead, J.S.; Hawse, M.L.

    1994-01-01

    This international conference held in Czechoslovakia was a bold attempt to establish working relationships among scientists and engineers from three world areas: Taiwan, the United States of America, and Czechoslovakia. The magic words unifying this gathering were ''clean coal utilization.'' For the ten nationalities represented, the common elements were the clean use of coal as a domestic fuel and as a source of carbon, the efficient and clean use of coal in power generation, and other uses of coal in environmentally acceptable processes. These three world areas have serious environmental problems, differing in extent and nature, but sufficiently close to create a working community for discussions. Beyond this, Czechoslovakia is emerging from the isolation imposed by control from Moscow. The need for each of these nations to meet and know one another was imperative. The environmental problems in Czechoslovakia are extensive and deep-seated. These proceedings contain 63 papers grouped into the following sections: The research university and its relationship with accrediting associations, government and private industry; Recent advances in coal utilization research; New methods of mining and reclamation; Coal-derived waste disposal and utilization; New applications of coal and environmental technologies; Mineral and trace elements in coal; Human and environmental impacts of coal production and utilization in the Silesian/Moravian region; and The interrelationships between fossil energy use and environmental objectives. Most papers have been processed separately for inclusion on the data base

  16. Polish Geophysical Solid Earth Infrastructure Contributing to EPOS

    Science.gov (United States)

    Debski, W.; Mutke, G.; Suchcicki, J.; Jozwiak, W.; Wiejacz, P.; Trojanowski, J.

    2012-04-01

    In this poster we present the current state of the main polish solid-earth-orientated infrastructures and shortly described history of their development, current state, and some plans for their future development. The presen- tation concentrates only on the classical infrastructure leaving aside for the while the the geodetic-orientated infrastructure, like GPS network and the GPS processing data centers, gravimetric infrastructure and others of this type. Polish broadband seismic infrastructure consists of 7 permanent broadband stations incorporated into the VEBSN initiative running at the polish territory and one operated in collaboration with NORSAR is settled at the Hornsund (Svalbard) polish polar station. All stations are equipped with STS-2 seismometers and polish MK-6 seismic stations providing 120 dB dynamics 100Hz sampling and data transmission in a real time to processing center. Besides this permanent broadband seismic network (PLSN) the Central Institute of Mining is running the permanent regional, short period network at the Upper Silesia area dedicated to the detailed monitoring of seismicity induced by the black coal mining activity in this area. The network consists of As the mining activity is the main source of seismicity in Poland also all mines are running underground short period networks, like for example Rudna-Polkowice copper mine seismic network consisting of 64 underground located short period seimometers. In that area, especially around the Zelazny Most: the huge post-floating artificial lake the, IGF PAS is running the local seismic array consisting of 4 short period seismometers. Besides these permanent network IGF PAN is running the portable seismic network for detailed mapping a possible natural seismic activity in selected regions of Poland. Important contribution to classical geophysical observation in the electro-magnetic field are provided by three permanent geomagnetic observatories (one at Hornsund) and supporting set of 10

  17. Pelletization of fine coals. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, K.V.S.

    1995-12-31

    Coal is one of the most abundant energy resources in the US with nearly 800 million tons of it being mined annually. Process and environmental demands for low-ash, low-sulfur coals and economic constraints for high productivity are leading the coal industry to use such modern mining methods as longwall mining and such newer coal processing techniques as froth flotation, oil agglomeration, chemical cleaning and synthetic fuel production. All these processes are faced with one common problem area--fine coals. Dealing effectively with these fine coals during handling, storage, transportation, and/or processing continues to be a challenge facing the industry. Agglomeration by the unit operation of pelletization consists of tumbling moist fines in drums or discs. Past experimental work and limited commercial practice have shown that pelletization can alleviate the problems associated with fine coals. However, it was recognized that there exists a serious need for delineating the fundamental principles of fine coal pelletization. Accordingly, a research program has been carried involving four specific topics: (i) experimental investigation of coal pelletization kinetics, (ii) understanding the surface principles of coal pelletization, (iii) modeling of coal pelletization processes, and (iv) simulation of fine coal pelletization circuits. This report summarizes the major findings and provides relevant details of the research effort.

  18. Use of phytoproductivity data in the choice of native plant species to restore a degraded coal mining site amended with a stabilized industrial organic sludge.

    Science.gov (United States)

    Chiochetta, Claudete G; Toumi, Hela; Böhm, Renata F S; Engel, Fernanda; Poyer-Radetski, Gabriel; Rörig, Leonardo R; Adani, Fabrizio; Radetski, Claudemir M

    2017-11-01

    Coal mining-related activities result in a degraded landscape and sites associated with large amounts of dumped waste material. The arid soil resulting from acid mine drainage affects terrestrial and aquatic ecosystems, and thus, site remediation programs must be implemented to mitigate this sequential deleterious processes. A low-cost alternative material to counterbalance the affected physico-chemical-microbiological aspects of the degraded soil is the amendment with low contaminated and stabilized industrial organic sludge. The content of nutrients P and N, together with stabilized organic matter, makes this material an excellent fertilizer and soil conditioner, fostering biota colonization and succession in the degraded site. However, choice of native plant species to restore a degraded site must be guided by some minimal criteria, such as plant survival/adaptation and plant biomass productivity. Thus, in this 3-month study under environmental conditions, phytoproductivity tests with five native plant species (Surinam cherry Eugenia uniflora L., C. myrianthum-Citharexylum myrianthum, Inga-Inga spp., Brazilian peppertree Schinus terebinthifolius, and Sour cherry Prunus cerasus) were performed to assess these criteria, and additional biochemical parameters were measured in plant tissues (i.e., protein content and peroxidase activity) exposed to different soil/sludge mixture proportions. The results show that three native plants were more adequate to restore vegetation on degraded sites: Surinam cherry, C. myrianthum, and Brazilian peppertree. Thus, this study demonstrates that phytoproductivity tests associated with biochemical endpoint measurements can help in the choice of native plant species, as well as aiding in the choice of the most appropriate soil/stabilized sludge proportion in order to optimize biomass production.

  19. Impacts of Coal Seam Gas (Coal Bed Methane) and Coal Mining on Water Resources in Australia

    Science.gov (United States)

    Post, D. A.

    2013-12-01

    Mining of coal bed methane deposits (termed ';coal seam gas' in Australia) is a rapidly growing source of natural gas in Australia. Indeed, expansion of the industry is occurring so quickly that in some cases, legislation is struggling to keep up with this expansion. Perhaps because of this, community concern about the impacts of coal seam gas development is very strong. Responding to these concerns, the Australian Government has recently established an Independent Expert Scientific Committee (IESC) to provide advice to the Commonwealth and state regulators on potential water-related impacts of coal seam gas and large coal mining developments. In order to provide the underlying science to the IESC, a program of ';bioregional assessments' has been implemented. One aim of these bioregional assessments is to improve our understanding of the connectivity between the impacts of coal seam gas extraction and groundwater aquifers, as well as their connection to surface water. A bioregional assessment can be defined as a scientific analysis of the ecology, hydrology, geology and hydrogeology of a bioregion, with explicit assessment of the potential direct, indirect and cumulative impacts of coal seam gas and large coal mining development on water resources. These bioregional assessments are now being carried out across large portions of eastern Australia which are underlain by coal reserves. This presentation will provide an overview of the issues related to the impacts of coal seam gas and coal mining on water resources in Australia. The methodology of undertaking bioregional assessments will be described, and the application of this methodology to six priority bioregions in eastern Australia will be detailed. Preliminary results of the program of research to date will be assessed in light of the requirements of the IESC to provide independent advice to the Commonwealth and State governments. Finally, parallels between the expansion of the industry in Australia with that

  20. Polish Toxic Currency Options

    Directory of Open Access Journals (Sweden)

    Waldemar Gontarski

    2009-04-01

    Full Text Available Toxic currency options are defined on the basis of the opposition to the nature (essence of an option contract, which is justified in terms of norms founded on the general law clause of characteristics (nature of a relation (which represents an independent premise for imposing restrictions on the freedom of contracts. So-understood toxic currency options are unlawful. Indeed they contravene iuris cogentis regulations. These include for instance option contracts, which are concluded with a bank, if the bank has not informed about option risk before concluding the contract; or the barrier options, which focus only on the protection of banks interests. Therefore, such options may appear to be invalid. Therefore, performing contracts for toxic currency options may be qualified as a criminal mismanagement. For the sake of security, the manager should then take into consideration filing a claim for stating invalidity (which can be made in a court verdict. At the same time, if the supervisory board member in a commercial company, who can also be a subject to mismanagement offences, commits an omission involving lack of reaction (for example, if he/she fails to notify of the suspected offence committed by the management board members acting to the companys detriment when the management board makes the company conclude option contracts which are charged with absolute invalidity the supervisory board member so acting may be considered to act to the companys detriment. In the most recent Polish jurisprudence and judicature the standard of a good host is treated to be the last resort for determining whether the managers powers resulting from criminal regulations were performed. The manager of the exporter should not, as a rule, issue any options. Issuing options always means assuming an obligation. In the case of currency put options it is an absolute obligation to purchase a given amount in euro at exchange rate set in advance. On the other hand issuing

  1. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  2. Drivers for the renaissance of coal

    Science.gov (United States)

    Steckel, Jan Christoph; Edenhofer, Ottmar; Jakob, Michael

    2015-01-01

    Coal was central to the industrial revolution, but in the 20th century it increasingly was superseded by oil and gas. However, in recent years coal again has become the predominant source of global carbon emissions. We show that this trend of rapidly increasing coal-based emissions is not restricted to a few individual countries such as China. Rather, we are witnessing a global renaissance of coal majorly driven by poor, fast-growing countries that increasingly rely on coal to satisfy their growing energy demand. The low price of coal relative to gas and oil has played an important role in accelerating coal consumption since the end of the 1990s. In this article, we show that in the increasingly integrated global coal market the availability of a domestic coal resource does not have a statistically significant impact on the use of coal and related emissions. These findings have important implications for climate change mitigation: If future economic growth of poor countries is fueled mainly by coal, ambitious mitigation targets very likely will become infeasible. Building new coal power plant capacities will lead to lock-in effects for the next few decades. If that lock-in is to be avoided, international climate policy must find ways to offer viable alternatives to coal for developing countries. PMID:26150491

  3. Drivers for the renaissance of coal.

    Science.gov (United States)

    Steckel, Jan Christoph; Edenhofer, Ottmar; Jakob, Michael

    2015-07-21

    Coal was central to the industrial revolution, but in the 20th century it increasingly was superseded by oil and gas. However, in recent years coal again has become the predominant source of global carbon emissions. We show that this trend of rapidly increasing coal-based emissions is not restricted to a few individual countries such as China. Rather, we are witnessing a global renaissance of coal majorly driven by poor, fast-growing countries that increasingly rely on coal to satisfy their growing energy demand. The low price of coal relative to gas and oil has played an important role in accelerating coal consumption since the end of the 1990s. In this article, we show that in the increasingly integrated global coal market the availability of a domestic coal resource does not have a statistically significant impact on the use of coal and related emissions. These findings have important implications for climate change mitigation: If future economic growth of poor countries is fueled mainly by coal, ambitious mitigation targets very likely will become infeasible. Building new coal power plant capacities will lead to lock-in effects for the next few decades. If that lock-in is to be avoided, international climate policy must find ways to offer viable alternatives to coal for developing countries.

  4. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry. [Indiana

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T.

    1973-01-01

    The author has identified the following significant results. The Mined Land Inventory map of Pike, Gibson, and Warrick Counties, Indiana, prepared from ERTS-1 imagery, was included in the 1973 Annual Report of the President's Council on Environmental Quality as an example of ERTS applications to mined lands. Increasing numbers of inquiries have been received from coal producing states and coal companies interested in the Indiana Program.

  5. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2018-01-01

    This article offers a history of landscaping at Søby brown coal beds – a former mining site in western Denmark. Exploring this industrial landscape through a series of projects that have made different natural resources appear, we argue that what is even recognized as resources shifts over time...... has been seen interchangeably to rest with brown coal business, inexpensive estates for do-it-yourself people, pasture for grazing, and recreational forest, among other things. We discuss these rifts in landscaping, motivated by what we refer to as industriousness, to show that in an industrial site...

  6. Quarterly coal report, October--December 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for October through December 1996 and aggregated quarterly historical data for 1990 through the third quarter of 1996. Appendix A displays, from 1988 on, detailed quarterly historical coal imports data. To provide a complete picture of coal supply and demand in the US, historical information has been integrated in this report. 8 figs., 72 tabs.

  7. Industry

    OpenAIRE

    Schmidt-Belz, B.; Mohamad, Y.; Velasco, C.A.

    2009-01-01

    Industry plays a key role in the path towards eInclusion. While corporate social responsibility statements of leading companies confirm this, surveys show that there is still a long way to go. Among various reasons for the reluctant take-up of Design for All (DfA) by industry providing Information and Communication Technology (ICT), the lack of relevant knowledge and skills obviously plays a crucial role. Therefore, the DfA@eInclusion project has undertaken to develop curriculum guidelines an...

  8. Surfactant-Assisted Coal Liquefaction

    Science.gov (United States)

    Hickey, Gregory S.; Sharma, Pramod K.

    1993-01-01

    Obtaining liquid fuels from coal which are economically competitive with those obtained from petroleum based sources is a significant challenge for the researcher as well as the chemical industry. Presently, the economics of coal liquefaction are not favorable because of relatively intense processing conditions (temperatures of 430 degrees C and pressures of 2200 psig), use of a costly catalyst, and a low quality product slate of relatively high boiling fractions. The economics could be made more favorable by achieving adequate coal conversions at less intense processing conditions and improving the product slate. A study has been carried out to examine the effect of a surfactant in reducing particle agglomeration and improving hydrodynamics in the coal liquefaction reactor to increase coal conversions...

  9. Coal: a South African success story

    Energy Technology Data Exchange (ETDEWEB)

    Boers, R.

    1990-01-01

    Describes the South African coal mining industry, including exports domestic use of coal, coal geology and mining methods, employment, labour relations, benefits and social amenities provided for workers, safety and environmental aspects including land reclamation. Also discusses the implications of sanctions on coal and the mining industry, and argues that sanctions have not achieved and cannot achieve the stated objective of the social and political emancipation of black South Africa. Concludes that in order to defeat apartheid, South Africa, needs economic growth and encouragement for those attempting reform.

  10. Queensland coal sets new records in 2001

    International Nuclear Information System (INIS)

    Smith, R.; Coffey, D.; Abbott, E.

    2002-01-01

    In 2001 the Queensland coal industry consolidated on record expansion in the export market over the past two years and again, increased its sales to overseas customers. New sales records were set in both the export and domestic markets. Unprecedented international demand for Queensland metallurgical coals coupled with improved prices and a favourable A$-US$ exchange rate created strong market conditions for the Queensland coal export industry, boosting confidence for further expansion and new developments. Australian coal exports in 2001 amounted to 194 Mt and are forecast to reach 275 million tonnes per annum (Mtpa) in 2020. The Queensland coal industry is poised to capture a significant share of this market growth. Queensland's large inventory of identified coal, currently estimated at more than 37 billion tonnes (raw coal m situ), is adequate to sustain the industry for many years and allow new opencut and underground mines to develop according to future market demand. Recent coal exploration successes are expected to add significant tonnage to the inventory (Coxhead, Smith and Coffey, 2002). Most of the coal exported from Queensland is mined in the Bowen Basin of central Queensland and additional tonnage of Walloon coal is exported by mines in the Moreton Basin and Surat Basin in south-east Queensland. The Walloon Coal Measures and its equivalents contain large resources of undeveloped opencut, high volatile, clean-burning thermal coal. The environmental advantages in the utilisation of these coals are now recognised and strong growth in production is expected in the near future for supply to both the domestic and export markets. Establishment of new rail transport and civil infrastructure will however, be required to support the development of large scale mining operations in this region

  11. Cannabinoids cases in polish athletes

    OpenAIRE

    A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

    2009-01-01

    The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

  12. Black coal. Annual report 1997

    International Nuclear Information System (INIS)

    1997-01-01

    An overview is given of the situation of the world energy industry with regard to all energy carriers. Then energy-political conclusions are drawn for German black coal and the resulting prospects are detailed. Finally, some socio-political aspects are considered with regard to German black-coal mining: Workforce policy, tariff policy, social security and social safeguards for the adaptation process. (orig.) [de

  13. Nuclear energy, coal, and environment

    International Nuclear Information System (INIS)

    Yang Yin; Pan Ziqiang.

    1989-01-01

    From the view point of environmental protection, nuclear plants are superior to coal-fired ones. Coal-fired plants and other uses of burning create serious environmental problems, whereas no noticeable impacts are identified for nuclear plants. Even with respect to radiation risk, with equal energy output, a coal-fired plant is one order of magnitude higher than a nuclear station. Energy is a prerequisite for the development of a national economy and the improvement of living standards. Economic growth must be coordinated with the exploitation of energy resources. The worsening shortage of energy has made it imperative that China step up its energy development and pay full attention to the development of nuclear energy. Among direct energy sources, about 70% came from coal in the past. The public has been greatly concerned over the pollution caused by coal-fired power stations and/or other industrial and domestic use of coal burning. With increasing mining of coal, the issues related to pollution from the use of coal will become more serious and prominent. 17 refs., 3 tabs

  14. CSR, environment-friendly investments and innovations - the three elements necessary to build a modern and strong coal mining company?

    Directory of Open Access Journals (Sweden)

    Hałasik Katarzyna

    2016-01-01

    Full Text Available Currently, strongly increasing globalization forces companies around the world to search new ways to build competitive advantage and achieving goals. Society having wider access to information and products, began to pay attention not only to the attractiveness of the goods, but also to the credibility of the environmental and social of functioning companies. This makes, that the concept of corporate social responsibility and the green revolution, which are strongly associated with innovations, in last years become widely discussed in the literature, as well as popular in the activities of enterprises. This article is an attempt to answer the question, whether the combination of these three elements is a guarantee for the creations of a positive image, and thus the value of a modern and strong company. The research literature aims to identify the current approach to these three factors and their characteristics. In contrast, the analysis of Polish hard coal mining sector indicates the role of innovation, environmental protection and CSR in the industry - whether the actions in this area are present and to what extent. In addition, it will be presented to outline the current state of Polish hard coal mining sector

  15. Quality aspects of thermal coal marketing

    International Nuclear Information System (INIS)

    Dunstone, D.

    1998-01-01

    Australia's thermal coal industry is under increasing competition. A successful marketing strategy must distinguish the product from that of Australian competitors, leaving the buyer in no doubt as to its value. The marketing of thermal coal is a very different experience and encompasses an interesting commercial and technical mix. The technical merits of a coal may be effectively used to prepare the way for a sale. However, once the technical hurdle is passed (i.e. the coal is classified as acceptable), the three factors which influence the sale are price, price and price. The other aspect of marketing is that marketing, especially technical market support, must realize that the buyer often has no experience in using the coals purchased. This is particularly true with thermal coals. Virtually no thought is given as to how the coal performs or how much is used. Consequently, it is not uncommon for cheap, low quality coals to be purchased, even though it is not the choice that will result in the lowest power generation cost when all other factors are taken into consideration. The author has developed a model which allows to differentiate between coals for a range of properties relative to the use of the coal, so that a coal company can calculate the break-even price in term of cost per kWh of electricity generated and enable a more valid cost comparison between coals to be made

  16. Analysis of coal streams with californium-252

    International Nuclear Information System (INIS)

    Worster, B.W.

    1976-01-01

    The sulfur, ash, water, and energy content of coal are increasingly important parameters to various coal users because of their relationship to air pollution, energy conservation, and to the proper operation of coal-burning plants. For example, ash accumulation is critical in electric power plants and suppliers of coal operate under contracts specifying maximum ash and sulfur content of their product. Conventional analysis of streams of coal on the order of 100 to 2000 tons/hour have relief on elaborate mechanical sampling mechanisms to take primary, secondary, and tertiary cuts from the coal stream with pulverizing stages between cuts to reduce it down to a fine powder which is analyzed off-line with wet chemical methods. (X-ray backscatter techniques have been applied to small coal streams for ash analysis.) This technique is too slow for process control in coal cleaning and blending operations, and is unreliable because of the highly heterogeneous nature of coal as it comes from the mine. Analysis of the entire stream of coal for the parameters of interest appears to be feasible only by analyzing the prompt gamma rays produced by capture of thermal neutrons diffusing through the coal. At FMC Corporation, we are performing extensive tests of the analysis of coal on-line for its important parameters using a californium-252 neutron source. In this paper we report the progress of our tests and the outlook for commercial industrial application of the method

  17. Coal competitiveness?

    International Nuclear Information System (INIS)

    Rogeaux, B.

    2006-01-01

    Will coal electrical plants be more competitive in the coming years? Answering this one cannot be limited to merely comparing estimates based on reference electricity production costs. The competitiveness of coal will indeed depend on the final product marketed, as the MWhs are not equal: is the purpose to produce base, half-base MWh? Does the electrical equipment structure require flexible MWh (for instance in the event of significant intermittent renewable energy amounts), and therefore plants able to adjust their power rapidly? But the competitiveness of coal will also depend on many factors that will correct reference cost estimates: uncertainties, risks, externalities. These factors will need to be appreciated on a case by case basis. We introduce some of the reasoning used to better appreciate the future competitiveness of coal, and the main factors conditioning it in three contrasting regions of the world: Europe, USA, china. (author)

  18. Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

    Directory of Open Access Journals (Sweden)

    Violetta Koseska-Toszewa

    2015-11-01

    Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

  19. Know-how management ''Rock mechanics and support methods for the gate roads in the German coal mining industry''; Wissensmanagement ''Gebirgsmechanik und Ausbautechnik fuer Floezstrecken im deutschen Steinkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Junker, M. [Deutsche Steinkohle AG, Herne (Germany). Servicebereich Technik und Logistik; Schmidt, R.

    2006-03-23

    The R+D-project for establishment of a database with the entire know-how of the last 30 years from the ''Rock mechanics and support methods for gate roads in the German coal mining industry'' has so far been carried out as planned. After adaptation to the project the selected computer system was introduced. A planning module with recorded operational cases and a structured literature database is thus available to the Competence Centre for Road Supports in the Mining Technology Department of the Technology and Logistics Service Division of DSK. (Orig.)

  20. World coal outlook to the year 2000

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    The 1983 edition of the World Coal Outlook to the Year 2000 examines the worldwide impact of lower oil prices and lower economic activity on the demand, production, and international trade in coal. The report includes detailed regional forecasts of coal demand by end-use application. Regions include the US, Canada, Western Europe, Japan, Other Asia, Latin America, Africa, Australia/New Zealand, Communist Europe, and Communist Asia. In addition, regional coal production forecasts are provided with a detailed analysis of regional coal trade patterns. In all instances, the changes relative to Chase's previous forecasts are shown. Because of the current situation in the oil market, the report includes an analysis of the competitive position of coal relative to oil in the generation of electricity, and in industrial steam applications. The report concludes with an examination of the impact of an oil price collapse on the international markets for coal.

  1. Cannabinoids cases in polish athletes

    Directory of Open Access Journals (Sweden)

    A Pokrywka

    2009-07-01

    Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

  2. Sensing roughness and polish direction

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

    2016-01-01

    needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...... structures and light scattered from scratches....

  3. Coal-fired boiler houses in Cracow present state and possibilities to improve their efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Cyklis, P. [Institute of Industrial Equipment and Power Engineering, Cracow (Poland); Butcher, T.A. [Brookhaven National Lab., Upton, NY (United States)

    1995-12-31

    A significant amount of heat energy both for heating and process purposes is generated in Cracow, Poland in small-and medium size local boiler houses. The operating procedure of these boiler houses is most often economically and ecologically ineffective because of the bad condition of boilers and lack of funds to install automation, control and measurement equipment. Within the Polish-American Program of Elimination of Low Emission Sources financed by the US Department of Energy, the ENERGOEKSPERT Co., Ltd. investigated chosen boiler houses in Cracow, commissioned by the Cracow Development Office. The results of these investigations were subject of engineering analysis carried out at the Institute of Industrial Equipment and Power Engineering, Technical University, Cracow. The analysis proved that the low-cost improvement of economic efficiency and reduction of air pollutant emission is feasible for combustion of coal fuels.

  4. Attitudes of Polish Consumers Toward Experiential Marketing

    Directory of Open Access Journals (Sweden)

    Monika Skorek

    2017-01-01

    Full Text Available Purpose: The experience economy is a concept that can be defned as a new way of perceiving the market offer of an enterprise, focusing on the customer experience. Enterprises, both in the production and service industries, are becoming similar to one another on a massive scale, which makes it increasingly diffcult to stand out. The response to this can be to offer the consumer an unforgettable experience related to a product or service provided by a company. Methodology: This study analysed the results of qualitative research on the attitudes and opinions of Polish consumers on experience marketing. Results/fndings: The results showed that participants of the study were prepared to transition from the economy based on products or services to an economy based on experiences at a moderate level. They declared a willingness to participate in experiences offered by companies but at the same time focus on the cost and utility of them

  5. Quarterly coal report, July--September 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for July through September 1998 and aggregated quarterly historical data for 1992 through the second quarter of 1998. 58 tabs.

  6. Coal's sleeping market: non-utility generators

    International Nuclear Information System (INIS)

    McMahan, R.L.; Knutson, K.S.

    1992-01-01

    The article briefly profiles the coal market for non-utility generation (NUG). Coal consumption by NUGs, currently estimated at around 6.1 million tons, is projected to reach nearly 13.6 million tons by 1995 and 21.2 million tons by 2000. If the projected growth is achieved the NUG market may become one of the strongest market segments for the coal industry into the next century. 3 figs., 2 tabs

  7. Mine Water Treatment in Hongai Coal Mines

    OpenAIRE

    Dang Phuong Thao; Dang Vu Chi

    2018-01-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine ...

  8. Evaluation of ecological consequences of coal mine closure in Kuzbass coal region

    International Nuclear Information System (INIS)

    Schastlivcev, E.L.; Barannic, L.P.; Ovdenko, B.I.; Bykov, A.A.

    2000-01-01

    Kemerovo region (otherwise called Kuzbass) is the most industrially developed and urbanized region of Siberia, Russia. The main industrial branch of Kuzbass is coal output. Open pits and underground mines of Kuzbass produce about 40% of total amount of coal in Russia and more than 70% of coking coal. In the current process of the coal industry's restructuring, the closing of many unprofitable coal enterprises is associated with radical changes in their influence on the environment. The task to provide a probable forecast of ecological consequence of mine closure is both practically significant and complicated. In order to find some scientific approach to solve named problem the authors made in the paper the first attempts to analyze of accessible closed mines data in Kuzbass, to classify coal mines (working and closed) with respect to there negative influence on soil, water and atmosphere and to obtain some numerical estimates of possible bounds of this influence. 7 refs

  9. Organic petrography:An approach for identification of maceral groups in Gheshlagh coal area, Eastern Alborz

    Directory of Open Access Journals (Sweden)

    Tahereh Rabani

    2016-07-01

    Full Text Available Introduction Maceral is a term to introduce organic components visible under a microscope (Stopes, 1935. The physical and chemical characteristics of macerals such as elemental composition, moisture content, hardness, density and petrographic characteristics differ. The differences in the physical and chemical characteristics of macerals are reflected in their industrial behavior.(Parkash, 1985. Petrographic analysis provides information on the various physical components of coals (Suwarna and Hemanto, 2007 and determination of quality of coal, coalification rate, composition and characteristics of coke and paleoenvironmental deposition (Taylor et al., 1998. Sampling and methodology Coal samples were collected from freshly mined coal from 11 coal seams of 4 active coal mines (Cheshlagh, Zemestan Yourt, Narges Chal and Cheshmehsaran for organic petrography in the Gheshlagh coal deposits. All samples were collected and stored in plastic bags to prevent contamination and weathering. Samples were prepared for microscopic analysis by reflected light following ASTM Standard procedure D2797-04. For microscopic study, coal samples were crushed to1-mm size fraction (18 mesh size, mounted in epoxy resin and polished. Three polished samples were prepared for each coal seam. The petrographic composition was obtained by maceral analyses under standard conditions (ISO 7404/3, 2009, for maceral analysis. Maceral point counting (based on 400 points analyses were performed using an Olympus BX51 reflected light microscope. The terminology used to identify and describe the organic matter particles is the one proposed by the International Committee for Coal and Organic Petrology (ICCP, 1998; ICCP, 2001; Scott and Glasspool, 2007; Taylor et al., 1998; Stach et al., 1982; Hower et al., 2009; Hower and Wagner, 2012. Organic petrography of theGheshlagh coal seams The vitrinite maceral group is dominant in all coal seams (66.2 to 87.2 vol.% and includes collodetrinite

  10. Coal mining situation in the Federal Republic of Germany. Year 2016; Zur Lage des Kohlenbergbaus in der Bundesrepublik Deutschland. Jahr 2016

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-03-03

    The paper reports on the coal mining in the Federal Republic of Germany in the year 2016. Statistical data are presented for coal market, brown coal mining as well as the hard coal mining. These data consider the supply and demand of coal in Germany, and employees of the German coal industry.

  11. Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

    Science.gov (United States)

    Stein, David

    This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

  12. Effects of modified coal-winning methods on structures in the coal mining industry. Learning from a case of damage; Auswirkungen veraenderter Abbauverfahren auf Bauwerke des Steinkohlenbergbaus. Lehren aus einem Schadensfall

    Energy Technology Data Exchange (ETDEWEB)

    Fastabend, M.; Schaefers, T.; Reissmann, F. [Ingenieurbuero IDN, Duisburg (Germany); Fischer, P.; Kaehler, A. [Deutsche Steinkohle AG (DSK), Herne (Germany)

    2006-11-07

    The collapse of a side wall of a raw feed coal bunker after 30 years in operation at a DSK colliery gave rise to the checking of structures of the same type of the basis of the causes of damage. Due to highly mechanised working methods in the colliery the soil mechanical boundary conditions of the filling material have changed. Meanwhile a deeper knowledge of the ground pressure theory to be assumed, which always necessitates consideration of at least a proportion of the earth static pressure in the case of rigid structures of this type, is also available. (orig.)

  13. Clean coal combustion in domestic sector

    Energy Technology Data Exchange (ETDEWEB)

    Dreszer, K.; Kubica, K.; Sciazko, M. [Institute for Chemical Processing of Coal, Zabrze (Poland)

    1998-12-31

    Combustion of raw coal in existing domestic furnaces with a low efficiency (usually below 50%) is a source of pollutants generation like dust, SO{sub 2} and PAH including cancerogenic BAP, resulting in serious environmental problems. Emission of pollutants depends on solid fuels quality and fuel combustion parameters. Pollutants emission can be decreased by the use of upgraded coal derived solid fuels or replacement of old heating appliances with new ones with high thermal efficiency and ecological affectivity. Several ecological fuels manufacturing methods have been elaborated in the Institute for Chemical Processing of Coal. Thermal and emission tests of heating devices and solid fuels were performed with the use of IChPW experimental plant. Results were confirmed in heating devices in real heating objects. Taking results into account proposal of legal regulation for Polish domestic sector was elaborated. 4 figs., 2 tabs.

  14. Clean coal combustion in domestic sector

    Energy Technology Data Exchange (ETDEWEB)

    Dreszer, K.; Kubica, K.; Sciazko, M. (Institute for Chemical Processing of Coal, Zabrze (Poland))

    1998-01-01

    Combustion of raw coal in existing domestic furnaces with a low efficiency (usually below 50%) is a source of pollutants generation like dust, SO[sub 2] and PAH including cancerogenic BAP, resulting in serious environmental problems. Emission of pollutants depends on solid fuels quality and fuel combustion parameters. Pollutants emission can be decreased by the use of upgraded coal derived solid fuels or replacement of old heating appliances with new ones with high thermal efficiency and ecological affectivity. Several ecological fuels manufacturing methods have been elaborated in the Institute for Chemical Processing of Coal. Thermal and emission tests of heating devices and solid fuels were performed with the use of IChPW experimental plant. Results were confirmed in heating devices in real heating objects. Taking results into account proposal of legal regulation for Polish domestic sector was elaborated. 4 figs., 2 tabs.

  15. Characterization and supply of coal based fuels

    Energy Technology Data Exchange (ETDEWEB)

    1992-06-01

    Studies and data applicable for fuel markets and coal resource assessments were reviewed and evaluated to provide both guidelines and specifications for premium quality coal-based fuels. The fuels supplied under this contract were provided for testing of advanced combustors being developed under Pittsburgh Energy Technology Center (PETC) sponsorship for use in the residential, commercial and light industrial (RCLI) market sectors. The requirements of the combustor development contractors were surveyed and periodically updated to satisfy the evolving needs based on design and test experience. Available coals were screened and candidate coals were selected for further detailed characterization and preparation for delivery. A team of participants was assembled to provide fuels in both coal-water fuel (CWF) and dry ultrafine coal (DUC) forms. Information about major US coal fields was correlated with market needs analysis. Coal fields with major reserves of low sulfur coal that could be potentially amenable to premium coal-based fuels specifications were identified. The fuels requirements were focused in terms of market, equipment and resource constraints. With this basis, the coals selected for developmental testing satisfy the most stringent fuel requirements and utilize available current deep-cleaning capabilities.

  16. Appalachian clean coal technology consortium

    Energy Technology Data Exchange (ETDEWEB)

    Kutz, K.; Yoon, Roe-Hoan [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)

    1995-11-01

    The Appalachian Clean Coal Technology Consortium (ACCTC) has been established to help U.S. coal producers, particularly those in the Appalachian region, increase the production of lower-sulfur coal. The cooperative research conducted as part of the consortium activities will help utilities meet the emissions standards established by the 1990 Clean Air Act Amendments, enhance the competitiveness of U.S. coals in the world market, create jobs in economically-depressed coal producing regions, and reduce U.S. dependence on foreign energy supplies. The research activities will be conducted in cooperation with coal companies, equipment manufacturers, and A&E firms working in the Appalachian coal fields. This approach is consistent with President Clinton`s initiative in establishing Regional Technology Alliances to meet regional needs through technology development in cooperation with industry. The consortium activities are complementary to the High-Efficiency Preparation program of the Pittsburgh Energy Technology Center, but are broader in scope as they are inclusive of technology developments for both near-term and long-term applications, technology transfer, and training a highly-skilled work force.

  17. Clean Coal Initiatives in India

    Directory of Open Access Journals (Sweden)

    Sribas Goswami

    2014-08-01

    Full Text Available Availability of, and access to, coal is a crucial element of modern economies and it helps pave the way for human development. Accordingly, the thermal power sector and steel industries have been given a high priority in the national planning processes in India and a concerted focus on enhancing these sectors have resulted in significant gain in generation and availability of electricity and steel in the years since independence. To meet the need of huge demand of power coal is excavated. The process of excavation to the use of coal is potential enough to degrade the environment. Coal Mining is a development activity, which is bound to damage the natural ecosystem by all its activities directly and ancillary, starting from land acquisition to coal beneficiation and use of the products. Huge areas in the Raniganj and Jharia coal field in India have become derelict due to abandoned and active opencast and underground mines. The study is pursued to illustrate the facts which show the urgent need to clean coal mining in India.

  18. Trends in coal use - global, EU and Poland

    Science.gov (United States)

    Suwała, Wojciech; Wyrwa, Artur; Olkuski, Tadeusz

    2017-11-01

    That aim of this paper is to compare trends in global, European use of coal with tendencies in Poland, one of heavy coal dependent countries. Polish power generation is unique among OECD countries, the share of both hard coal and lignite in power generation reaches 81% [1]. Climate policy of European Union is to phase out intensive greenhouse gases sectors, thus to transform Polish power generation into less carbon intensive. Although such policy is generally accepted in Poland, the paste and practically proposed regulation that excludes coal generation from capacity mechanisms, is considered as threat to energy security. Coal is the base for generation for one simple reason, abundant in European scale hard coal reserves and significant capacities in lignite. Natural gas reserves allow to supply about 1/3 of consumption, but prices and supplies dependent hitherto on contracts with GAZPROM did not allow to develop significant generation capacities. Renewable resources are limited, there is not much possibilities for hydro, wind and solar. Poland is also one of the countries of poor air quality, traditional coal based space heating systems plus obsolete car fleet generate vast emissions, especially during the winter. Only recently this became top priority of environmental authorities. This situation is subject to transformation, government, managers are aware that the role of coal needs to be decreased, but there are two main questions, the paste of transformation and the future energy mix. The paper attempts to answer the question whether the expected changes in Polish energy mix are comparable or differ from the global and European tendencies.

  19. Coal as a Substitute for Carbon Black

    Science.gov (United States)

    Kushida, R. O.

    1982-01-01

    New proposal shows sprayed coal powder formed by extrusion of coal heated to plastic state may be inexpensive substitute for carbon black. Carbon black is used extensively in rubber industry as reinforcing agent in such articles as tires and hoses. It is made from natural gas and petroleum, both of which are in short supply.

  20. Dewatering pump control in underground coal mines

    International Nuclear Information System (INIS)

    Anthony, Kim M.

    2012-01-01

    An underground coal mine roadway dewatering network is a highly variable, constantly changing system. Pumps used in this environment need to achieve a wide range of duties that may change regularly. This article discusses the use of and preferred methods in the context of an Australian underground coal mine with conditions particular to this industry.

  1. Atmospheric emission of mercury due to combustion of steam coal and domestic coal in China

    Science.gov (United States)

    Wang, Shaobin; Luo, Kunli

    2017-08-01

    To study the mercury emission due to the combustion of steam coal and domestic coal in China, we analyzed the mercury contents of coal, fly ash, bottom ash and sluicing water in thermal power plants, steam boilers as well as domestic coal-stoves, in Shaanxi, Shanxi, Shandong and Yunnan Provinces. This study conduct an estimate of the Hg emission rates from steam coal and domestic coal combustion based on the method of mass distribution ratio of fly ash and bottom ash. The results show that the Hg emission rate of coal combustion in thermal power plants is about 50.21% (electrostatic precipitators + wet flue gas desulfurization), and that in heating boilers is about 67.23%, and 92.28% in industrial boilers without flue gas desulphurisation equipment. Furthermore, Hg emission rate is 83.61% due to domestic coal combustion in coal-stoves. The Hg emission amount into the atmosphere from power and heat generation, industrial boilers, domestic coal-stoves and spontaneous combustion of coal gangue is roughly estimated to be 133 ± 4, 100 ± 17, 11 ± 0.1 and 47 ± 26 tons in China in 2014, respectively, and the total Hg emission amount from this paper is estimated at 292 tons. The trends of Hg emission in China from 1991 to 2014 show an accelerating growth after 2002. The proportion of mercury emission due to thermal power, heating generation and industrial energy utilization continuously increased. The atmospheric emission of mercury due to combustion of steam coal, domestic coal and coal gangue accounts nearly 50% in total anthropogenic Hg emissions in China, indicating one of the largest sources of Hg emission in China which should draw more public and scientific attention in the future.

  2. Clean Coal Diesel Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Robert Wilson

    2006-10-31

    A Clean Coal Diesel project was undertaken to demonstrate a new Clean Coal Technology that offers technical, economic and environmental advantages over conventional power generating methods. This innovative technology (developed to the prototype stage in an earlier DOE project completed in 1992) enables utilization of pre-processed clean coal fuel in large-bore, medium-speed, diesel engines. The diesel engines are conventional modern engines in many respects, except they are specially fitted with hardened parts to be compatible with the traces of abrasive ash in the coal-slurry fuel. Industrial and Municipal power generating applications in the 10 to 100 megawatt size range are the target applications. There are hundreds of such reciprocating engine power-plants operating throughout the world today on natural gas and/or heavy fuel oil.

  3. Identification of plant megafossils in Pennsylvanian-age coal

    Science.gov (United States)

    Winston, R.B.

    1989-01-01

    Criteria are provided for identification of certain Pennsylvanian-age plant megafossils directly from coal based on their characteristic anatomical structures as documented from etched polished coal surfaces in comparison with other modes of preservation. Lepidophloios hallii periderm, Diaphorodendron periderm, an Alethopteris pinnule, and a Cordaites leaf were studied in material in continuity with adjacent permineralized peat (carbonate coal-ballas). Calamites wood in attachment to a pitch cast and a Psaronius stem in coal in attachment to a fusinitized Psaronius inner root mantle were studied. Sigillaria was identified in coal by comparison to its structure in permineralized peat. Other plant tissues with characteristic structures were found but could not be attributed to specific plants. ?? 1989.

  4. State of the industry

    International Nuclear Information System (INIS)

    Lilly, P.; Ogden, S.O.; Sell, D.P.; Garges, T.W.

    1991-01-01

    This panel discussion on the state of the US coal industry presented three points of view. The issue is one of perspective, for the coal miner current conditions are not particularly encouraging given the economic climate, environmental issues, and the ambiguity of the proposed National Energy Strategy. To make matters worse, much of the public views the production and utilization of coal as an environmental risk. It is easy to overlook the fact that the US coal industry is poised for tremendous growth and opportunity. Demand for energy and electricity worldwide is projected to increase significantly and coal is expected to play a major role. New technologies such as clean coal combustion and coal gasification will be required to meet growing human and environmental requirements. The coal industry must educate the public on the capabilities of coal, advance new technologies for deployment and commercial development, demonstrate prudent mining and safety records and develop human talent and skills necessary to advance US coal in the 21st century

  5. Coal catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Kroenig, W.

    1944-02-11

    Some considerations in the selection of a catalyst for the liquid phase of coal hydrogenation are discussed. Some of the previous history of such selections is mentioned. At one stage of the development, the principal catalyst had been iron sulfate (FeSO/sub 4/.7H/sub 2/O). Later, for reasons of cost and availability of large supplies, selections had turned to mixtures of iron sulfate and one or another of some iron oxide- and aluminum oxide-containing byproducts of aluminum manufacture, namely Bayermasse, Luxamsse, or Lautamasse. Much of the discussion centered on optimal proportions for such mixtures, particularly as related to pH values of resulting coal pastes. Upper Silesian coal was more alkaline than Ruhr coal, and Bayermasse, etc., were quite alkaline. Thus, since the iron sulfate served as a partial neutralizer for the coal as well as a catalyst, it seemed necessary to increase the proportions of iron sulfate in the catalyst mixture when processing coal of greater alkalinity. A further reason for a greater proportion of iron sulfate seemed to be that most of the catalytic activity of the iron came from the ferrous iron of iron sulfate rather than from the ferric iron of the other materials. Ferrous-ferric ratios also seemed to indicate that Luxmasse or Lautamasse might be better catalyst components than Bayermasse but their water content sometimes caused handling problems, so Bayermasse had been more widely used. Formation of deposits in the preheater was more likely due to the Bayermasse than to the iron sulfate; sodium sulfide could help to prevent them.

  6. FINANCIAL SECURITY OF POLISH HOUSEHOLDS

    Directory of Open Access Journals (Sweden)

    Agnieszka Kozera

    2016-09-01

    Full Text Available  A household’s fi nancial security is essential for the satisfaction of the needs and wants of its members, both communal and individual. It constitutes a kind of foundation for all of a household’s fi nancial decisions that impact its standard of living. The article aims to assess the level of fi nancial security of Polish households in 2005–2013. The research draws on data from Genworth Index, HBS conducted by the Central Statistical Offi ce (GUS and Social Diagnosis (Diagnoza społeczna overseen by the Social Monitoring Council. The study shows that Poland is characterized by a low level of fi nancial security relative to other European countries, especially Western and Scandinavian. More than three-quarters of Polish households experience fi nancial problems and exhibit both a low propensity to save, and low savings rates.

  7. Energy savings in Polish buildings

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L.C.; Gula, A.; Reeves, G.

    1995-12-31

    A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

  8. Preliminary experimental studies of waste coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Su, S.; Jin, Y.G.; Yu, X.X.; Worrall, R. [CSIRO, Brisbane, QLD (Australia). Advanced Coal Technology

    2013-07-01

    Coal mining is one of Australia's most important industries. It was estimated that coal washery rejects from black coal mining was approximately 1.82 billion tonnes from 1960 to 2009 in Australia, and is projected to produce another one billion tonnes by 2018 at the current production rate. To ensure sustainability of the Australian coal industry, we have explored a new potential pathway to create value from the coal waste through production of liquid fuels or power generation using produced syngas from waste coal gasification. Consequently, environmental and community impacts of the solid waste could be minimized. However, the development of an effective waste coal gasification process is a key to the new pathway. An Australian mine site with a large reserve of waste coal was selected for the study, where raw waste coal samples including coarse rejects and tailings were collected. After investigating the initial raw waste coal samples, float/sink testing was conducted to achieve a desired ash target for laboratory-scale steam gasification testing and performance evaluation. The preliminary gasification test results show that carbon conversions of waste coal gradually increase as the reaction proceeds, which indicates that waste coal can be gasified by a steam gasification process. However, the carbon conversion rates are relatively low, only reaching to 20-30%. Furthermore, the reactivity of waste coal samples with a variety of ash contents under N{sub 2}/air atmosphere have been studied by a home-made thermogravimetric analysis (TGA) apparatus that can make the sample reach the reaction temperature instantly.

  9. Earnings Management in Polish Companies

    OpenAIRE

    Brzeszczyński, Janusz; Gajdka, Jerzy; Schabek, Tomasz

    2012-01-01

    This paper presents results of the investigation of a phenomenon known as "earnings management'' (EM) among the companies listed on the Polish stock market. The distribution of earnings per share (EPS) for the stocks around the threshold value of "zero" and the threshold of "recent performance" was analyzed in the period of years 1997-2010. Moreover, the changes of earnings for the stocks, which are suspected to manipulate their earnings, were also investigated. The results, which indicate as...

  10. LOVE in English and Polish

    Directory of Open Access Journals (Sweden)

    Małgorzata Brożyna Reczko

    2017-12-01

    Full Text Available LOVE in English and Polish The paper presents a sample contrastive analysis of the linguistic picture of love in English and Polish. The material used in the survey is drawn from lexicographic data, including the British National Corpus and Narodowy Korpus Języka Polskiego [National Corpus of Polish]. The paper focuses on the similarities and differences in conceptualizing the abstract concept of love in the English and Polish languages. An analytical method, developed by Bartmiński and associates, serves as the theoretical basis for the reconstruction of the linguistic picture of the world.   MIŁOŚĆ w języku angielskim i polskim Niniejszy artykuł to próba kontrastywnego porównania językowego obrazu świata MIŁOŚCI w języku angielskim i polskim. Materiał badawczy pochodzi głównie ze źródeł leksykograficznych: słowników oraz korpusów (Narodowego Korpusu Języka Polskiego oraz z korpusu języka angielskiego British National Corpus. Celem badania było poszukiwanie podobieństw i różnic w konceptualizacji MIŁOŚCI w tych dwóch językach. Metoda badawcza została zaczerpnięta z prac J. Bartmińskiego i dotyczy rekonstrukcji językowego obrazu świata różnych pojęć.

  11. Development of a self-consistent thermodynamic- and transport-property correlation framework for the coal conversion industry. Phase I. Semiannual report, September 1, 1980-February 28, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Starling, K.E.; Lee, L.L.; Kumar, K.H.

    1981-01-01

    During the first half year of this research program the following elements of research have been performed: (1) the development of an improved pure component data bank, including collection and processing of data which is 70% complete as to substance, (2) calculation of distillable coal fluid thermodynamic properties using a multiparameter corresponding states correlation, (3) application of the most general density-cubic equation of pure fluids and (4) initiation of research to extend the corresponding states correlation framework to polar fluids. Primary conclusions of the first phase of this research program are that the three parameter corresponding states correlation predicts lighter coal fluid properties to a reasonable level of accuracy, and that a cubic equation can predict pure fluid thermodynamic properties on par with non-cubic equations of state.

  12. 19th Polish Control Conference

    CERN Document Server

    Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

    2017-01-01

    This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

  13. Directly polished lightweight aluminum mirror

    Science.gov (United States)

    ter Horst, Rik; Tromp, Niels; de Haan, Menno; Navarro, Ramon; Venema, Lars; Pragt, Johan

    2017-11-01

    During the last ten years, Astron has been a major contractor for the design and manufacturing of astronomical instruments for Space- and Earth based observatories, such as VISIR, MIDI, SPIFFI, X-Shooter and MIRI. Driven by the need to reduce the weight of optically ultra-stiff structures, two promising techniques have been developed in the last years: ASTRON Extreme Lightweighting [1][2] for mechanical structures and an improved Polishing Technique for Aluminum Mirrors. Using one single material for both optical components and mechanical structure simplifies the design of a cryogenic instrument significantly, it is very beneficial during instrument test and verification, and makes the instrument insensitive to temperature changes. Aluminum has been the main material used for cryogenic optical instruments, and optical aluminum mirrors are generally diamond turned. The application of a polishable hard top coating like nickel removes excess stray light caused by the groove pattern, but limits the degree of lightweighting of the mirrors due to the bi-metal effect. By directly polishing the aluminum mirror surface, the recent developments at Astron allow for using a non-exotic material for light weighted yet accurate optical mirrors, with a lower surface roughness ( 1nm RMS), higher surface accuracy and reduced light scattering. This paper presents the techniques, obtained results and a global comparison with alternative lightweight mirror solutions. Recent discussions indicate possible extensions of the extreme light weight technology to alternative materials such as Zerodur or Silicon Carbide.

  14. Quarterly coal report, October--December 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for October through December 1998 and aggregated quarterly historical data for 1992 through the third quarter of 1998. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. 58 tabs.

  15. Quarterly coal report, April--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-02

    The Quarterly Coal Report provides comprehensive information about US coal production, exports, imports, receipts, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. This issue presents detailed quarterly data for April 1990 through June 1990, aggregated quarterly historical data for 1982 through the second quarter of 1990, and aggregated annual historical data for 1960 through 1989 and projected data for selected years from 1995 through 2010. To provide a complete picture of coal supply and demand in the United States, historical information and forecasts have been integrated in this report. 7 figs., 37 tabs.

  16. Underground Coal Preparation System and Applications

    Science.gov (United States)

    Wei, Cao; DeYong, Shang; BaoNing, Zhang

    2018-03-01

    The underground coal preparation is a cutting-edge technology of the coal industry worldwide. This paper introduced the meaning of implementing the underground coal preparation, and the practical applications of underground mechanical moving screen jig, underground heavy medium shallow slot and underground air jigger. Through analyzing the main separation equipment and the advantages and disadvantages of three primary processes from aspects of process complexity, slime water treatment, raw coal preparation, etc., the difference among technology investment, construction scale, production cost and economic benefit is concluded.

  17. Quarterly coal report, April--June, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-11-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for April through June 1998 and aggregated quarterly historical data for 1992 through the first quarter of 1998. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. 58 tabs.

  18. Mine Water Treatment in Hongai Coal Mines

    Science.gov (United States)

    Dang, Phuong Thao; Dang, Vu Chi

    2018-03-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  19. Mine Water Treatment in Hongai Coal Mines

    Directory of Open Access Journals (Sweden)

    Dang Phuong Thao

    2018-01-01

    Full Text Available Acid mine drainage (AMD is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  20. The two faces of coal : uncertainty the common prospect for metallurgical and thermal coal

    International Nuclear Information System (INIS)

    Zlotnikov, D.

    2010-01-01

    Although the methods of producing thermal and metallurgical coal are the same, metallurgical coal is destined to cross the world for steel manufacturing and thermal coal is destined for power plants close to where it was mined. This article discussed the factors influencing the price of these 2 coals. The production of thermal coal can remain steady during an economic crisis because coal-fired power plants generally provide low-cost-base-load electricity that remains stable during economic cycles. However, the demand for metallurgical coal is more volatile during an economic crisis because it is directly related to the demand for steel products in the construction and automotive industry, which are very sensitive to the state of the economy. There have been recent indications that Canada's export market for thermal coal is on the rise. In 2008, China became a net importer of coking coal. China's need for more coal to fuel its growing economy despite the global economic slowdown has meant that producers are diverting excess supply from European markets to China. Higher-end thermal coal offers low sulphur content and higher energy content, both desirable traits for power utilities facing strict emissions control. In addition to having huge reserves of very high-quality coal that is becoming increasingly important to China, Canada has the advantage of having the available transportation capacity in its west coast terminals and on its rail network. 3 figs.

  1. The European Coal Market: Will Coal Survive the EC's Energy and Climate Policies?

    International Nuclear Information System (INIS)

    Cornot-Gandolphe, Sylvie

    2012-01-01

    The European coal industry is at a crossroads. The European Commission (EC) Energy Policy by 2020, the 20/20/20 targets, is not favourable to coal: a 20% decrease in CO 2 emissions does not favour coal compared with natural gas, its main competitor in electricity generation; a 20% increase in energy efficiency will lead to a decrease in energy/coal consumption; a 20% increase in renewables will displace other energy sources, including coal. The recent EC Energy road-map to 2050 targets a cut in GHG emissions by 80-95%. Under such a tough emissions reduction target, the future use of coal is tied with CCS technologies for which public acceptance and an adequate CO 2 price are crucial. The Large Combustion Plants Directive has already had a huge impact on EU coal-fired electricity generation. In UK, a third of coal-fired power capacity will be closed by the end of 2015 at the latest. Phase III of the EU Emissions Trading Scheme requires CO 2 allowances to be auctioned from January 2013, adding a new burden on fossil fuel power plants. The end of state aid to European hard coal production by 2018, in line with EC Council Decision 2010/787/EU, means that domestic production is going to decrease. Does this mean the end of coal in Europe? Maybe not, and certainly not by 2020, although its future after that date is quite uncertain. Coal provides 17% of the EU s primary energy supply, and represents 25% of electricity generation. With the phasing out of nuclear energy in some countries (mainly Germany), coal has gained a period of grace before the transition to a less-carbonised economy. Its consumption by European power utilities increased by 7% in the first half of 2012, boosted by low CO 2 prices and relatively high gas prices. European production still accounts for 60% of the total coal supply in the EU. Coal therefore gives the EU a certain degree of independence and contributes to its security of supply. Hard coal and lignite represent approximately 80% of EU

  2. Chemical mechanical polishing (CMP) of sapphire

    Science.gov (United States)

    Zhu, Honglin

    The concept of chemical mechanical polishing (CMP) was examined for finishing sapphire. In this study sapphire was used as a model system for oxide ceramics. The removal rates were determined by weight loss. Surface quality and structure were characterized with surface probe microscopy (SPM). Polishing experiments were designed to test the chemically modified surface layer. A series of abrasives with various hardnesses including mono-crystalline and polycrystalline diamond, alpha and gamma alumina, zirconia, ceria and silica were used. Diaspore was also evaluated. The results indicated that, with similar particle size and shape, harder abrasives do not necessarily cause faster material removal and better surface finish, and abrasives with hardness equal to or less than sapphire such as alpha alumina and gamma alumina achieved the best surface finish and efficient material removal. A hypothesis was proposed that the sapphire surface was modified by water to form a thin hydration laver with structure and hardness close to diaspore. Abrasives with a hardness between diaspore and sapphire polished the c-plane of sapphire with good surface finish and efficient removal. SPM indicated the hydration layer on the c-plane surface was about 1 nm thick. Removal rate and surface finish as a function of pH were also examined on c-plane sapphire with nano-alumina abrasives. The removal rate as a function of pH was compared to the solubility behavior of alumina. The results showed the deviation of pH from the lowest solubility pH for alumina (pH = 5) was a driving force for the surface reaction to form a hydration layer. The anisotropy of sapphire strongly affects removal rate and surface quality in CMP. The relationships among orientation. pH and abrasive were studied for sapphire with c (0001), a (11-20), and m (10-10) planes. Based on the results, the CMP process for sapphire includes chemical reaction of the surface to form a thin reaction layer that is softer than sapphire

  3. Bulk analysis of coal

    International Nuclear Information System (INIS)

    Sowerby, B.D.

    1982-01-01

    Nuclear techniques used in the coal industry to determine specific energy, ash and moisture are outlined. Ash analysis by radioisotope X-ray techniques include a single X-ray measurement using a transmission or backscatter geometry and techniques with compensation for iron variations. Neutron techniques can be used to measure the concentration of some specific elements in coal. The measurement of specific energy, ash and moisture then depends on the correlation of the particular parameter with the measured elemental composition. Carbon can be determined by a combination of a measurement of 4.43 MeV 12 C gamma-rays from neutron inelastic scattering with a separate 60 Co gamma-ray scattering measurement. Sulphur meters are based on the measurement of 5.42 MeV neutron capture of gamma rays

  4. Disposal of coal combustion wastes in the hydraulic backfill process

    Science.gov (United States)

    Pierzyna, Piotr

    2017-11-01

    This article presents the results of studies regarding the physical properties of selected combustion by-products (CCPs) currently produced in the energy production industry. These properties have been compared with the requirements of the technologies applied in the Polish underground mines. The article gives special consideration to the application of the products in the hydraulic backfill technology. The possibility of using bottom-ashes and slags was considered. The amount of CCPs disposed in Polish hard coal mines is approximately 1.1 million Mg and the tendency is decreasing. In the past two years, approximately 100-150 thousand Mg of CCPs was used in the hydraulic backfill technology. The percentage of the fraction smaller than 0.1 mm is determining for the possibility of using a given type of CCPs in the backfill material. This practically excludes the possibility of using any fly ashes in that technology. In slags from conventional boilers and bottom ashes from fluidized bed boilers the fraction below 0.1 mm constitutes 25% of the total at maximum, which allows for their use in the materials used in hydraulic backfill as a component comprising from 30% to 60%, respectively. Slags (10 01 01) are characterized by the lack of bonding properties, which, in case of open backfill systems that are exposed to atmospheric conditions, constitutes an advantage in comparison to bottom ashes (10 01 24), which in turn definitely exhibit bonding properties. The solution of the problem of using bottom ashes is their supply and application on a current basis.

  5. Coal mining in Bangladesh: Options to mitigate environmental impacts

    OpenAIRE

    Angen, Meara Rose

    2008-01-01

    This study examines methods of mitigating the environmental impacts of coal mining in Bangladesh. Coal is expected to aid in providing energy security for the country in the short-term. The coal mining industry is currently in its infancy, and no policy exists. This study examines the government policies of three diverse countries and discovers that there are several instruments commonly used to reduce the environmental impacts of coal mining. These instruments include regulations that set st...

  6. Coal: the dinosaur wakes up; Charbon: le dinosaure se reveille

    Energy Technology Data Exchange (ETDEWEB)

    Rousseau, Y.; Cosnard, D

    2005-10-01

    In western countries, coal is considered as an industry of the past, but at the Earth's scale the situation is radically the opposite. Since three years, coal is the faster developing energy source, in particular thanks to China expansion and to the oil crisis which makes coal more competitive. This short paper presents the situation of coal mining in China: projects, working conditions and environmental impact. (J.S.)

  7. Coal distribution, January--June 1991

    International Nuclear Information System (INIS)

    1991-01-01

    The Coal Distribution report provides information on coal production, distribution, and stocks in the United States to a wide audience including Congress, Federal and State agencies, the coal industry, and the general public. The data in this report are collected and published by the Energy Information Administration (EIA) to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275, Sections 5 and 13, as amended). This issue presents information for January through June 1991. Coal distribution data are shown (in Tables 1--34) by coal-producing Sate of origin, consumer use, method of transportation, and State of destination. All data in this report were collected by the EIA on Form EIA-6, ''Coal Distribution Report.'' A copy of the form and the instructions for filing appear in Appendix B. All data in this report for 1991 are preliminary. Data for previous years are final. 6 figs., 34 tabs

  8. Coal at the crossroads

    International Nuclear Information System (INIS)

    Scaroni, A.W.; Davis, A.; Schobert, H.; Gordon, R.L.; Ramani, R.V.; Frantz, R.L.

    1992-01-01

    Worldwide coal reserves are very large but coal suffers from an image of being an environmentally unfriendly and inconvenient fuel. Aspects discussed in the article include: coal's poor image; techniques for coal analysis, in particular instrumented techniques; developments in clean coal technology e.g. coal liquefaction, fluidized bed combustion, co-generation and fuel slurries; the environmental impact of mining and land reclamation; and health aspects. It is considered that coal's future depends on overcoming its poor image. 6 photos

  9. An Overview of Polish Martial Arts

    Directory of Open Access Journals (Sweden)

    Wojciech J. Cynarski

    2012-07-01

    Full Text Available The purpose of this study is to explain the revival of Polish martial arts from the perspectives of cultural sociology, the sciences of physical culture, and the humanistic theory of martial arts. The Polish Martial Arts (Polskie Sztuki Walki are a subject still requiring serious scientific examination, even in Poland. There are few works concerning the history of Polish weapons, and most only describe techniques for wielding specific types of edged weapons. Nevertheless, there is a large group of enthusiasts trying to restore and cultivate the old Polish tradition, a tradition with heavy emphasis on the art of fencing. The author knows many of the people and facts presented here, from personal observation and from direct participation in these arts. As a disciple of the late Master Yoshio Sugino (10th-dan Kobudo Katori Shinto-ryu, he fought against the Polish saber champion, and he has taken part in joint exhibitions of Polish and Japanese fencing.

  10. Environmental impact of coal mining on the natural environment in Poland

    International Nuclear Information System (INIS)

    Wysocka, M.; Chalupnik, S.; Michalik, B.; Skowronek, J.; Skubacz, K.

    2002-01-01

    Saline waters occurring in underground coal mines in Poland often contain natural radioactive isotopes, mainly 226 Ra from uranium series and 228 Ra from thorium series. Approximately 40% of total amount of radium remains underground in a form of radioactive deposits, but 225 MBq of 226 Ra and 400 MBq of 228 Ra are released daily to the rivers with mine effluents. Technical measures as spontaneous precipitation of radium in gobs, decreasing of amounts of water inflows into underground working etc. have been undertaken in several coal mines and as the result total amount of radium released to the surface waters diminished of about 60% during last 5-6 years. Mine waters can cause a severe impact on the natural environment, mainly due to its salinity. But also the enhancement of radium concentration in river waters, bottom sediments and vegetation is observed. Sometimes radium concentration in rivers exceeds 0.7 kBq/m 3 , which is due to Polish law a permissible level for waste waters. The extended investigations were performed in all coal mines and on this basis the radium balance in effluents has been calculated. Measurements done in the vicinity of mine water's settling ponds and in rivers gave us an opportunity to survey radium behaviour in river waters and the range of contamination. Solid waste materials with enhanced natural radioactivity have been produced in huge amounts in power and coal industries in Poland. There are two main sources of these waste products. As a result of combustion of coal in power plants low radioactive waste materials are produced, with 226 Ra concentration seldom exceeding few hundreds of Bq/kg. Different situation is observed in coal mines, where as a result of precipitation of radium from radium-bearing waters radioactive deposits are formed. Sometimes natural radioactivity of such materials is very high, in case of scaling from coal mines radium concentration may reach 400 000 Bq/kg - similar activity as for 3% uranium ore

  11. Water pollution profile of coal washeries

    International Nuclear Information System (INIS)

    Gupta, R.K.; Singh, Gurdeep

    1995-01-01

    Environmental problems in coal mining industry is increased with the demand of good quality of coal through coal washing/beneficiation activities. The coal washeries in general have been identified as one of the serious sources of water pollution particularly of Damodar river. Coal washeries though are designed on close water circuit, most of these however, fail to operate on close water circuit thus resulting in enormous quantity of effluents containing coal fines as well. This apart from posing serious water pollution problem also results into economic losses. The present study attempts to provide an insight into water pollution profile from coal washeries in Jharia coalfield. Various process parameters/unit operations in coal washing are also described. Effluents from various selected coal washeries of Jharia coalfield are sampled and analysed over a period of six months during 1993. Suspended solids, oil and grease and COD in the washery effluents are identified as the three major water quality parameters causing lots of concern for Damodar river pollution. Reasons for unavoidable discharge of effluents containing coal fines are also described. (author). 14 refs., 4 tabs., 2 figs

  12. Coal resources of Indiana

    Science.gov (United States)

    Spencer, Frank Darwyn

    1953-01-01

    The Indiana coal field forms the eastern edge of the eastern interior coal basin, which is near some of the most densely populated and highly productive manufacturing areas of the United States. (See fig. 1. ) For this reason Indiana coal reserves are an important State and National asset. In dollar value the coal mining industry is the largest of Indiana's natural-resource-producing industries. The total value of coil production for the year 1950 was more than 100 million dollars, or more than that of all other natural-resource industries in the State combined. As estimated herein, the original coal reserves of Indiana total 37,293 million tons, of which 27,320 million tons is contained in beds more than 42 inches thick; 7,632 million tons in beds 28 to 49. inches thick; and 2,341 million tons in beds 14 to 28 inches thick. The remaining reserves as of January 1951, total 35,806 million tons, of which 18,779 million tons is believed to be recoverable. The distribution of the reserves in these several categories is summarized by counties in table 1. Of the total original reserves of 37,293 million tons, 6,355 million tons can be classified as measured; 8,657 million tons as indicated; and 22,281 million tons as inferred. Strippable reserves constitute 3,524 million tons, or 9.5 percent of the total original reserves. The distribution of the strippable and nonstrippable original reserves is summarized in tables 2 and 3 by counties and by several categories, according to the thickness of the beds and the relative abundance and reliability of the information available for preparing the estimates. The distribution of the estimated 18,779 million tons of recoverable strippable and nonstrippable reserves in Indiana is further summarized by counties in table 4, and the information is presented graphically in figures 2 and 3. The tables i to 4 and figures 2 and 3 include beds in the 14- to 28-inch category, because thin beds have been mined in many places. However, many

  13. The tourism attractiveness of Polish libraries

    OpenAIRE

    Miedzińska, Magdalena; Tanaś, Sławoj

    2009-01-01

    The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

  14. Coal derived-briquetted solid fuels

    International Nuclear Information System (INIS)

    Sciazko, M.

    1993-01-01

    Despite considerable progress, there are some regions in Central and Eastern Europe where residential heating is dominated by direct burning of bituminous or brown coal with all environmental consequences. In Poland, the residential heating consumes more than 25 mln tons of coal annually. It is estimated that during the heating season coal-fired individual home ovens and local heating stations in some Polish heavily populated areas contribute up to 22% in total emission of dust, 86% of SO 2 , and 56% of tar species. It has been proposed to replace some of the fuel, i.e. directly burnt coal by more ecological solid fuels in a form of briquettes. Considering the emissive characteristics, solid ecological fuels can be divided into two groups. The first one manufactured on the basis of high rank coals, and a cold briquetting with some additives capturing harmful combustion products. Production of these fuels is reasonably cheap and simple and the result of their use is a noticeable decrease in dust, sulfur oxides and soot emissions. The second one is ecologically clean fuel, i.e. smokeless fuel, produced on the basis of deeply degasified coals and a hot briquetting with the addition of either binder or caking coals and other compounds aimed at capturing harmful combustion products. The technology of production of the smokeless fuels is much more complicated and expensive, but as a result of their use a significant decrease in atmospheric emission is achieved. The best results are observed in decreasing the emission of tars and aromatic hydrocarbons. Technologies of production of ecological fuels are non-waste and non-emissive. The paper deals with the economical and technological side of briquetted solid fuels of both types. Emission factors of chosen components for ecological fuels with reference to primary coal are also discussed

  15. Application of coal combustion residues to the stabilization/solidification of industrial wastes (IRIS); Desarrollo de un Proceso, a Escala Piloto de Inertizacion de Residuos Industriales con Cenizas Volantes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    Stabilization/solidification (S/S) processes, also called inertization processes, are a group of techniques which employ additives to reduce the mobility of the hazardous components from the waste and make possible for the residue to be accepted for its disposal in a safe way. These processes, mainly applied to wastes that contain heavy metals (such as lead, zinc, cadminum, mercury, copper, nickel, titanium, chromium-III, chromium-VI, arsenic,....) change the waste into a solid-like material in which the metals are trapped (nets and matrix) by physical or chemical links. The IRIS Project, carried out by AICIA through the ECSC Coal Programme with the participation of two industrial partners (Sevillana de Electricidad and EGMASA, a public-owned company for waste treatment), has developed, at pilot scale, a new S/S process for inorganic industrial wastes that uses great quantities of fly ash in the place of other more commonly used and expansive reagents. A pilot plant for 200 kg/h has been designed, built and operated. This facility has allowed to add improvements and scientific foundations to existing S/S technology. It has also allowed to obtain industrial scale parameters for fixed and portable plants. Experiencie have been mainly carried out using fly ash from high quality coals, but types of ash have been tested coming from coals with a greater calcium content, from fluidised bed combustion boilers and from desulphurisation processes, giving very suitable characteristics for their application to S/S processes. The addition of fly ash (up to 30%) in the IRIS process improves the results in comparison with the S/S processes that use only cement, because the final pH obtained (8-11) does not allow amphoteric metallic ions to escape in the leachate. The same as other S/S processes, IRIS can be applied also to wastes that contain certain metals (chromium-VI, arsenic, for example) with specific pre-treatments (redox, for example). The efficiency of the IRIS treatment

  16. FT-IR and XRD analysis of coal from Makum coalfield of Assam

    Indian Academy of Sciences (India)

    iliary fuels, such as natural gas or imported coals to satisfy the coal quality requirement for ther- mal power generation, particularly from the emis- sion point of view. Since mineral matter affects almost all aspects of coal utilization, the accep- tance of coal for industrial application depends critically on both organic and ...

  17. The Effect of Pore Volume of Hard Coals on Their Susceptibility to Spontaneous Combustion

    Directory of Open Access Journals (Sweden)

    Agnieszka Dudzińska

    2014-01-01

    Full Text Available In this paper the results of the experimental studies on a relationship between pore volume of hard coals and their tendency to spontaneous combustion are presented. Pore volumes were determined by the gas adsorption method and spontaneous combustion tendencies of coals were evaluated by determination of the spontaneous combustion indexes Sza and Sza′ on the basis of the current Polish standards. An increase in the spontaneous combustion susceptibility of coal occurs in the case of the rise both in micropore volumes and in macropore surfaces. Porosity of coal strongly affects the possibility of oxygen diffusion into the micropores of coal located inside its porous structure. The volume of coal micropores determined on the basis of the carbon dioxide adsorption isotherms can serve as an indicator of a susceptibility of coal to spontaneous combustion.

  18. Using Mathematica software for coal gasification simulations – Selected kinetic model application

    Directory of Open Access Journals (Sweden)

    Sebastian Iwaszenko

    2015-01-01

    Full Text Available Coal gasification is recognized as a one of promising Clean Coal Technologies. As the process itself is complicated and technologically demanding, it is subject of many research. In the paper a problem of using volumetric, non-reactive core and Johnson model for coal gasification and underground coal gasification is considered. The usage of Mathematica software for models' equations solving and analysis is presented. Coal parameters were estimated for five Polish mines: Piast, Ziemowit, Janina, Szczygłowice and Bobrek. For each coal the models' parameters were determined. The determination of parameters was based on reactivity assessment for 50% char conversion. The calculations show relatively small differences between conversion predicted by volumetric and non reactive core model. More significant differences were observed for Johnson model, but they do not exceeded 10% for final char conversion. The conceptual model for underground coal gasification was presented.

  19. Coal-water slurry fuel combustion testing in an oil-fired industrial boiler. Semiannual technical progress report, February 15--August 15, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Scaroni, A.W.

    1997-06-03

    The project consists of four phases: (1) design, permitting, and test planning, (2) construction and start up, (3) demonstration and evaluation (1,000-hour demonstration), and (4) expanded demonstration and evaluation (installing a CWSF preparation circuit, performing baseline tests firing No. 6 fuel oil, and conducting additional CWSF testing). The boiler testing and evaluation will determine if the CWSF combustion characteristics, heat release rate, fouling and slagging behavior, corrosion and erosion tendencies, and fuel transport, storage, and handling characteristics can be accommodated in a boiler system designed to fire heavy fuel oil. In addition, the proof-of-concept demonstration will generate data to determine how the properties of a CWSF and its parent coal affect boiler performance. The economic factors associated with retrofitting boilers is also evaluated. The first three phases have been completed and the combustion performance of the burner that was provided with the boiler did not meet performance goals. A maximum coal combustion efficiency of 95% (compared to a target of 98%) was achieved and natural gas cofiring (15% of the total thermal input) was necessary to maintain a stable flame. Consequently, the first demonstration was terminated after 500 hours. The second CWSF demonstration (Phase 4) was conducted with a proven coal-designed burner. Prior to starting the second demonstration, a CWSF preparation circuit was constructed to provide flexibility in CWSF production. The circuit initially installed involved single-stage grinding. A regrind circuit was recently installed and was evaluated. A burner was installed from ABB Combustion Engineering (ABB/CE) and was used to generate baseline data firing No. 6 fuel oil and fire CWSF. A temporary storage system for No. 6 fuel oil was installed and modifications to the existing CWSF handling and preheating system were made to accommodate No. 6 oil.

  20. Geology in coal resource utilization

    International Nuclear Information System (INIS)

    Peters, D.C.

    1991-01-01

    The 37 papers in this book were compiled with an overriding theme in mind: to provide the coal industry with a comprehensive source of information on how geology and geologic concepts can be applied to the many facets of coal resource location, extraction, and utilization. The chapters have been arranged to address the major coal geology subfields of Exploration and Reserve Definition, Reserve Estimation, Coalbed Methane, Underground Coal Gasification, Mining, Coal Quality Concerns, and Environmental Impacts, with papers distributed on the basis of their primary emphasis. To help guide one through the collection, the author has included prefaces at the beginning of each chapter. They are intended as a brief lead-in to the subject of the chapter and an acknowledgement of the papers' connections to the subject and contributions to the chapter. In addition, a brief cross-reference section has been included in each preface to help one find papers of interest in other chapters. The subfields of coal geology are intimately intertwined, and investigations in one area may impact problems in another area. Some subfields tend to blur at their edges, such as with reserve definition and reserve estimation. Papers have been processed separately for inclusion on the data base

  1. Physical and chemical coal cleaning

    Science.gov (United States)

    Wheelock, T. D.; Markuszewski, R.

    1981-02-01

    Coal is cleaned industrially by freeing the occluded mineral impurities and physically separating the coal and refuse particles on the basis of differences in density, settling characteristics, or surface properties. While physical methods are very effective and low in cost when applied to the separation of coarse particles, they are much less effective when applied to the separation of fine particles. Also they can not be used to remove impurities which are bound chemically to the coal. These deficiencies may be overcome in the future by chemical cleaning. Most of the chemical cleaning methods under development are designed primarily to remove sulfur from coal, but several methods also remove various trace elements and ash-forming minerals. Generally these methods will remove most of the sulfur associated with inorganic minerals, but only a few of the methods seem to remove organically bound sulfur. A number of the methods employ oxidizing agents as air, oxygen, chlorine, nitrogen dioxide, or a ferric salt to oxidize the sulfur compounds to soluble sulfates which are then extracted with water. The sulfur in coal may also be solubilized by treatment with caustic. Also sulfur can be removed by reaction with hydrogen at high temperature. Furthermore, it is possible to transform the sulfur bearing minerals in coal to materials which are easily removed by magnetic separation.

  2. China's Coal: Demand, Constraints, and Externalities

    Energy Technology Data Exchange (ETDEWEB)

    Aden, Nathaniel; Fridley, David; Zheng, Nina

    2009-07-01

    This study analyzes China's coal industry by focusing on four related areas. First, data are reviewed to identify the major drivers of historical and future coal demand. Second, resource constraints and transport bottlenecks are analyzed to evaluate demand and growth scenarios. The third area assesses the physical requirements of substituting coal demand growth with other primary energy forms. Finally, the study examines the carbon- and environmental implications of China's past and future coal consumption. There are three sections that address these areas by identifying particular characteristics of China's coal industry, quantifying factors driving demand, and analyzing supply scenarios: (1) reviews the range of Chinese and international estimates of remaining coal reserves and resources as well as key characteristics of China's coal industry including historical production, resource requirements, and prices; (2) quantifies the largest drivers of coal usage to produce a bottom-up reference projection of 2025 coal demand; and (3) analyzes coal supply constraints, substitution options, and environmental externalities. Finally, the last section presents conclusions on the role of coal in China's ongoing energy and economic development. China has been, is, and will continue to be a coal-powered economy. In 2007 Chinese coal production contained more energy than total Middle Eastern oil production. The rapid growth of coal demand after 2001 created supply strains and bottlenecks that raise questions about sustainability. Urbanization, heavy industrial growth, and increasing per-capita income are the primary interrelated drivers of rising coal usage. In 2007, the power sector, iron and steel, and cement production accounted for 66% of coal consumption. Power generation is becoming more efficient, but even extensive roll-out of the highest efficiency units would save only 14% of projected 2025 coal demand for the power sector. A new wedge of

  3. Perceptions of and Attitudes towards Regional Varieties of Polish: Views from Two Polish Provinces

    Science.gov (United States)

    Milobog, Magdalena; Garrett, Peter

    2011-01-01

    This paper reports a study of perceptions and attitudes relating to regional varieties of Polish. The methodology followed folk linguistic approaches to attitudes research. Respondents in two Polish provinces were asked to draw on a map of Poland where they thought the main regional varieties of Polish were spoken, and then to name and…

  4. History of Polish gastrointestinal radiology.

    Science.gov (United States)

    Urbanik, A

    2003-12-01

    As early as several days after the publication of the information concerning Roentgen's discovery the first radiological examinations were performed in Poland. The new method was immediately introduced into medical practice, including gastroenterology. In that pioneer period the most important works were those by Walery Jaworski who was the first man in the world to perform an X-ray of gall stones as well as the stomach with the use of a contrast medium. In its more-than-a-hundred-year history Polish gastrointestinal radiology has attempted not only to catch up with the world science, but it also has made a considerable contribution to its development.

  5. Corporate Politics on Polish Millennials

    OpenAIRE

    Natalia Roślik

    2017-01-01

    In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinat...

  6. Polish Foundation for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Polish Foundation for Energy Efficiency (FEWE) was established in Poland at the end of 1990. FEWE, as an independent and non-profit organization, has the following objectives: to strive towards an energy efficient national economy, and to show the way and methods by use of which energy efficiency can be increased. The activity of the Foundation covers the entire territory of Poland through three regional centers: in Warsaw, Katowice and Cracow. FEWE employs well-known and experienced specialists within thermal and power engineering, civil engineering, economy and applied sciences. The organizer of the Foundation has been Battelle Memorial Institute - Pacific Northwest Laboratories from the USA.

  7. Beneficiation of power grade coals: its relevance to future coal use in India

    International Nuclear Information System (INIS)

    Sachdev, R.K.

    1992-01-01

    With consumption increasing from the current level of 220 mt. to over 600 mt. by the year 2010 A.D., coal will continue to enjoy a prime position in the overall energy scene in India. India being endowed with coal resources of high ash content, the major coal consuming industries have, by and large, adjusted the combustion techniques to suit the quality of coal available. However, wide fluctuations in the quality of coal supplies adversely affect their plant performance. With the coal deposits being localised in the eastern and central parts of peninsular India, the load on railway network in carrying coal to other parts of the country will continue to increase and this will emerge as a major constraint in managing the coal supply to the consuming centres located away from the coal fields. It is in this context, the author has discussed the need of setting up of coal cleaning facilities at the pit heads. The extent to which the transport network will be relieved of carrying avoidable muck in coal has been quantified along with the benefits that will accrue in the form of extra transport capacity, better power plant performance and reduced air pollution and solid waste at consumer end. (author). 5 refs., 6 tabs., 8 figs

  8. Energy Policies of IEA Countries: Poland [Polish version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Poland has made commendable efforts to develop a solid energy policy framework over the last years. As energy security is a high policy priority, the country is enhancing gas supply security by building an LNG terminal, expanding underground storage capacity and increasing domestic gas production. Polish plans for developing electricity and gas cross-border links will also contribute to regional security of supply. In addition, the government has announced an ambitious nuclear programme by 2030, envisaging the first unit to enter operation by 2022. Other achievements include energy intensity improvements, an increased share of renewables and a stronger focus on energy research and development (R&D). Despite these positive developments, there is room for improving Poland’s energy strategy. First, a more integrated energy and climate policy is needed to put Poland firmly on a low-carbon path while enhancing energy security. Second, energy policy could put more emphasis on promoting competition to make the energy markets more efficient. Decarbonising Poland’s power sector will be a particularly significant challenge requiring huge investments. Coal accounts for 55% of Polish primary energy supply and 92% of electricity generation, raising significant climate change and environmental challenges. To this end, Poland’s efforts to improve energy efficiency and to diversify the country’s energy mix are praiseworthy and should be pursued. The government’s attention to R&D on clean coal technologies, including carbon capture and storage (CCS) is also encouraging. The government could put more focus on the positive role that gas can play in decarbonising the electricity mix, especially if Poland’s potential resources of unconventional gas are confirmed. To tap these resources, it will be vital to put the necessary legal and regulatory framework in place. This in-depth review analyses the energy challenges facing Poland and provides sectoral critiques and

  9. Evaluation of Rock Bolt Support for Polish Hard Rock Mines

    Science.gov (United States)

    Skrzypkowski, Krzysztof

    2018-03-01

    The article presents different types of rock bolt support used in Polish ore mining. Individual point resin and expansion rock bolt support were characterized. The roof classes for zinc and lead and copper ore mines were presented. Furthermore, in the article laboratory tests of point resin rock bolt support in a geometric scale of 1:1 with minimal fixing length of 0.6 m were made. Static testing of point resin rock bolt support were carried out on a laboratory test facility of Department of Underground Mining which simulate mine conditions for Polish ore and hard coal mining. Laboratory tests of point resin bolts were carried out, especially for the ZGH Bolesław, zinc and lead "Olkusz - Pomorzany" mine. The primary aim of the research was to check whether at the anchoring point length of 0.6 m by means of one and a half resin cartridge, the type bolt "Olkusz - 20A" is able to overcome the load.The second purpose of the study was to obtain load - displacement characteristic with determination of the elastic and plastic range of the bolt. For the best simulation of mine conditions the station steel cylinders with an external diameter of 0.1 m and a length of 0.6 m with a core of rock from the roof of the underground excavations were used.

  10. Selective bibliography of surface coal mining and reclamation literature. Volume 2. Interior Coal Province

    Energy Technology Data Exchange (ETDEWEB)

    Patricoski, M. L.; Daniels, L. K.; Sobek, A. A.

    1979-08-01

    This bibliography has been compiled for use by researchers, students, and other groups who need a reference source of published literature related to surface coal mining and reclamation in the Interior Coal Province. This bibliography contains more than 1300 references, including government reports, journal articles, symposium proceedings, industrial reports, workshop proceedings, theses, and bibliographies. A simple format was used to categorize citations.

  11. Effect of addition of sewage sludge and coal sludge on bioavailability of selected metals in the waste from the zinc and lead industry.

    Science.gov (United States)

    Sobik-Szołtysek, Jolanta; Wystalska, Katarzyna; Grobelak, Anna

    2017-07-01

    This study evaluated the content of bioavailable forms of selected heavy metals present in the waste from Zn and Pb processing that can potentially have an effect on the observed difficulties in reclamation of landfills with this waste. The particular focus of the study was on iron because its potential excess or deficiency may be one of the causes of the failure in biological reclamation. The study confirmed that despite high content of total iron in waste (mean value of 200.975gkg -1 ), this metal is present in the forms not available to plants (mean: 0.00009gkg -1 ). The study attempted to increase its potential bioavailability through preparation of the mixtures of this waste with additions in the form of sewage sludge and coal sludge in different proportions. Combination of waste with 10% of coal sludge and sewage sludge using the contents of 10%, 20% and 30% increased the amounts of bioavailable iron forms to the level defined as sufficient for adequate plant growth. The Lepidum sativum test was used to evaluate phytotoxicity of waste and the mixtures prepared based on this waste. The results did not show unambiguously that the presence of heavy metals in the waste had a negative effect on the growth of test plant roots. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Optimal use of coal for power generation in India

    International Nuclear Information System (INIS)

    Mathur, Ritu; Chand, Sharat; Tezuka, Tetsuo

    2003-01-01

    There is growing consensus among energy planners that electricity requirements in India would increase rapidly in the next couple of decades, and that coal would continue to dominate the generating capacity mix. Comparatively high levels of ash in Indian coal causes concern both in terms of the high costs of coal movement and the associated environmental impacts. As per the notification of September 1997, all power plants located in sensitive areas, metropolitan cities and in areas distant from the coalfields, must use coal with <34% ash. However, little progress has been made towards coal beneficiation and some consumers have already started to import non-coking coal for blending in order to comply with environmental requirements. The importance of planning for optimal utilization and transportation of thermal coal cannot be underestimated, especially at a juncture where the Indian coal industry is already facing competition from rising imports of non-coking coal. This paper assesses the optimality of the current patterns of coal movement and examines the economics of beneficiating thermal coals. A linear programming model has been developed based on the framework of the general transportation problem. The authors conclude that the washery is not economically attractive given the current costs, beneficiation technique and quality of Indian non-coking coal. Model simulations have been attempted to assess the possibility of coal beneficiation based on techno-economic considerations rather than political or other considerations. The paper also stresses the possibility of overall gains to the economy by modifying the current patterns of coal movement

  13. Energy strategy would slow coal's growth, says DOE

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    The National Energy Strategy (NES) recently announced by the Bush Administration would slow the growth in use of coal by hundreds of millions of tons of coal by hundreds of millions of tons after 2000, according to the Department of Energy's (DOE) own figures. If today's policies are continued, coal consumption will nearly triple by 2030. Current annual consumption of more than 900 million tons (19 quadrillion Btus) would rise to 1,550 million tons in 2010 and to nearly 2,600 million tons by 2030. Coal's share of electricity generation, now about 55%, would grow to 75% by 2030 under the current policy base assumptions of the DOE. The NES, however, projects that surge of nuclear power plant construction will stem the growth of coal use. The strategy would still increase coal use, from 19 quadrillion Btus today to about 28 quads in 2010, but to only 32 quads by 2030. By 2030, coal would account for less than 50% of electricity generation under the NES. Total clean coal technologies capacity is substantially lower under the NES scenario case than under the clean coal actions alone. The strategy also contains good news for the coal industry in the short run. It holds out two main goals for coal policy: maintaining coal's competitiveness while meeting environmental, health and safety requirements; and creating a favorable export climate for US coal and coal technology

  14. Analysis of coal mining mechanization results

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young-Shik; Lee, Kyung-Woon; Kim, Oak-Hwan; Kim, Dae-Kyung [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

    1997-12-01

    The reducing coal market has been enforcing the coal industry to make exceptional rationalization and restructuring efforts since the end of the eighties. To the competition from crude oil and natural gas has been added the growing pressure from rising wages and rising production cost as the workings get deeper. To improve the competitive position of the remaining 11 coal mines after the rationalization of the industry, studies to improve mining system have been carried out. The statistics of coal industry are as follows. - The production of 1996 was dropped to 4,952 thousand tonne from 5,719 thousand tonne of 1995. - The overall O.M.S was increased to 1.81 ton per man{center_dot}shift from 1.68 ton of 1995. (author). 10 tabs., 12 figs.

  15. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2018-01-01

    This article offers a history of landscaping at Søby brown coal beds – a former mining site in western Denmark. Exploring this industrial landscape through a series of projects that have made different natural resources appear, we argue that what is even recognized as resources shifts over time...... has been seen interchangeably to rest with brown coal business, inexpensive estates for do-it-yourself people, pasture for grazing, and recreational forest, among other things. We discuss these rifts in landscaping, motivated by what we refer to as industriousness, to show that in an industrial site...... analysis of shifting landscape projects and has an essential methodological corollary, namely that fieldwork must be improvisational, situated, and humble. Rather than finding the ‘right’ field materials for a canonical landscape history of Søby, we develop a method of ‘dustballing’ – being blown here...

  16. Sexual activity of Polish adults.

    Science.gov (United States)

    Pastwa-Wojciechowska, Beata; Izdebski, Zbigniew

    2014-01-01

    The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. The research was conducted on a representative group of 3,200 Poles aged between 15-49, with the support of a well-known Polish research company - TNS OBOP. Face-to-face and Pencil and Paper (PAPI) interviews were carried out. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15), and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction). There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage) promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  17. Sexual activity of Polish adults

    Directory of Open Access Journals (Sweden)

    Beata Pastwa-Wojciechowska

    2014-03-01

    Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  18. Buffered Electrochemical Polishing of Niobium

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-03-01

    The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

  19. Method of polishing nickel-base alloys and stainless steels

    Science.gov (United States)

    Steeves, Arthur F.; Buono, Donald P.

    1981-01-01

    A chemical attack polish and polishing procedure for use on metal surfaces such as nickel base alloys and stainless steels. The chemical attack polish comprises Fe(NO.sub.3).sub.3, concentrated CH.sub.3 COOH, concentrated H.sub.2 SO.sub.4 and H.sub.2 O. The polishing procedure includes saturating a polishing cloth with the chemical attack polish and submicron abrasive particles and buffing the metal surface.

  20. Coal Bed Methane Primer

    Energy Technology Data Exchange (ETDEWEB)

    Dan Arthur; Bruce Langhus; Jon Seekins

    2005-05-25

    During the second half of the 1990's Coal Bed Methane (CBM) production increased dramatically nationwide to represent a significant new source of income and natural gas for many independent and established producers. Matching these soaring production rates during this period was a heightened public awareness of environmental concerns. These concerns left unexplained and under-addressed have created a significant growth in public involvement generating literally thousands of unfocused project comments for various regional NEPA efforts resulting in the delayed development of public and fee lands. The accelerating interest in CBM development coupled to the growth in public involvement has prompted the conceptualization of this project for the development of a CBM Primer. The Primer is designed to serve as a summary document, which introduces and encapsulates information pertinent to the development of Coal Bed Methane (CBM), including focused discussions of coal deposits, methane as a natural formed gas, split mineral estates, development techniques, operational issues, producing methods, applicable regulatory frameworks, land and resource management, mitigation measures, preparation of project plans, data availability, Indian Trust issues and relevant environmental technologies. An important aspect of gaining access to federal, state, tribal, or fee lands involves education of a broad array of stakeholders, including land and mineral owners, regulators, conservationists, tribal governments, special interest groups, and numerous others that could be impacted by the development of coal bed methane. Perhaps the most crucial aspect of successfully developing CBM resources is stakeholder education. Currently, an inconsistent picture of CBM exists. There is a significant lack of understanding on the parts of nearly all stakeholders, including industry, government, special interest groups, and land owners. It is envisioned the Primer would being used by a variety of