WorldWideScience

Sample records for plastic squeeze bottle

  1. Rapid Drinking Devices Constructed from I.V. Bags and Plastic Squeeze Bottles,

    Science.gov (United States)

    1985-04-01

    i D-153 652 RAPID DRINKING DEVICES CONSTRUCTED FROM IY BAS AND 1/1 I PLASTIC SQUEEZE BOTTLES (U) A MY RESEARCH INST OF I ENVIRONMENTAL MEDICINE...TITLE (and Subtitle) S. TYPE OF REPORT & PERIOD COVEREDLf Rapid Drinking Devices Constructed Fram I.V. ( Bags and Plastic Squeeze Bottles 6...running. The primary problem with using a plastic water bottle during a race is that it ~ must be held upright and squeezed tightly while the runner

  2. Comparison of detection threshold values determined using glass sniff bottles and plastic squeeze bottles.

    Science.gov (United States)

    Wudarski, Thomas J; Doty, Richard L

    2004-02-01

    Olfactory threshold measures are influenced by such factors as odorant species, diluent type, psychophysical paradigm, and stimulus-presentation procedure. In this study, we compared phenyl ethyl alcohol odor-detection thresholds obtained using 120-ml glass sniff bottles to those obtained using 120-ml plastic squeeze bottles. Although these presentation media are commonly employed in published studies, there has never been a formal comparison of values obtained using them. 10 male and 10 female subjects were tested on two threshold test sessions, one for each type of bottle. Order of sessions was systematically counterbalanced and completed on the same day for a given subject, with a minimum of 30 min. elapsing between sessions. A seven-reversal, single-staircase threshold procedure was employed. Although the threshold values were similar for the two procedures, slightly lower thresholds were obtained using the glass sniff bottles [respective M (SEM) log vol/vol values = -6.61 (.20) and -6.13 (.24)]. These data suggest that, while threshold values using these two presentation procedures can be roughly compared across studies, accurate comparisons may require a slight mathematical adjustment.

  3. A Plastic Bottle in Rectosigmoid

    Directory of Open Access Journals (Sweden)

    A. Derakhshanfar

    2007-07-01

    Full Text Available Introduction: Evaluation and treatment of foreign bodies in rectum involves careful history and physical examination. The cases of forced introduction of the objects most commonly are , sexual assault , self – introduced for anal eroticism and accidental insertion.Case Report: We describe a case of a patient with rectal impaction following self administration of a plastic bottle for anal sexual gratification. A 49 years old man was admitted in the emergency department with the history of self introduced a bottle into his rectum physical examination and abdominal X-Ray diagnosed the case as impacted foreign body in rectosigmoid. An attempt was made to deliver the bottle through the rectum but because of high lying big bottle in the sigmoid laporotomy was performed and the bottle was removed though a longitudinal incision on sigmoid colon.Conclusion: Retained rectosigmoid foreign bodies have been encountered more frequently and present a dilemma for management and rarely laporotomy for extraction of foreign bodies was performed.

  4. Gas Experiments with Plastic Soda Bottles.

    Science.gov (United States)

    Kavanah, Patrick; Zipp, Arden P.

    1998-01-01

    Describes the use of an inexpensive device consisting of a plastic soda bottle and a modified plastic cap in a range of demonstrations and experimental activities having to do with the behavior of gases. (Author/WRM)

  5. Gas Property Demonstrations Using Plastic Water Bottles

    Science.gov (United States)

    Campbell, Dean J.; Bannon, Stephen J.; Gunter, Molly M.

    2011-01-01

    Plastic water bottles are convenient containers for demonstrations of gas properties illustrating Boyle's law, Charles's law, and Avogadro's law. The contents of iron-based disposable hand warmer packets can be used to remove oxygen gas from the air within an unfilled plastic water bottle.

  6. Migration of bisphenol A from plastic baby bottles, baby bottle liners and reusable polycarbonate drinking bottles.

    Science.gov (United States)

    Kubwabo, C; Kosarac, I; Stewart, B; Gauthier, B R; Lalonde, K; Lalonde, P J

    2009-06-01

    Human exposure to bisphenol A (BPA) has recently received special attention. It has been shown that exposure to BPA may occur through the consumption of beverages or foods that have been in contact with polycarbonate (PC) plastic containers or epoxy resins in food packaging. A BPA migration study was conducted using a variety of plastic containers, including polycarbonate baby bottles, non-PC baby bottles, baby bottle liners, and reusable PC drinking bottles. Water was used to simulate migration into aqueous and acidic foods; 10% ethanol solution to simulate migration to low- and high-alcoholic foods; and 50% ethanol solution to simulate migration to fatty foods. By combining solid-phase extraction, BPA derivatization and analysis by GC-EI/MS/MS, a very low detection limit at the ng l(-1) level was obtained. Migration of BPA at 40 degrees C ranged from 0.11 microg l(-1) in water incubated for 8 h to 2.39 microg l(-1) in 50% ethanol incubated for 240 h. Residual BPA leaching from PC bottles increased with temperature and incubation time. In comparison with the migration observed from PC bottles, non-PC baby bottles and baby bottle liners showed only trace levels of BPA. Tests for leachable lead and cadmium were also conducted on glass baby bottles since these represent a potential alternative to plastic bottles. No detectable lead or cadmium was found to leach from the glass. This study indicated that non-PC plastic baby bottles, baby bottle liners and glass baby bottles might be good alternatives for polycarbonate bottles.

  7. UTILIZATION OF WASTE PLASTIC BOTTLES IN ASPHALT MIXTURE

    Directory of Open Access Journals (Sweden)

    TAHER BAGHAEE MOGHADDAM

    2013-06-01

    Full Text Available Nowadays, large amounts of waste materials are being produced in the world. One of the waste materials is plastic bottle. Generating disposable plastic bottles is becoming a major problem in many countries. Using waste plastic as a secondary material in construction projects would be a solution to overcome the crisis of producing large amount of waste plastics in one hand and improving the structure’s characteristics such as resistance against cracking on the other hand. This study aimed to investigate the effects of adding plastic bottles in road pavement. Marshall properties as well as specific gravity of asphalt mixture containing different percentages of plastic bottles were evaluated. Besides, Optimum Asphalt Content (OAC was calculated for each percentages of plastic bottles used in the mix. The stiffness and fatigue characteristics of mixture were assessed at OAC value. Results showed that the stability and flow values of asphalt mixture increased by adding waste crushed plastic bottle into the asphalt mixture. Further, it was shown that the bulk specific gravity and stiffness of mixtures increased by adding lower amount of plastic bottles; however, adding higher amounts of plastic resulted in lower specific gravity and mix stiffness. In addition, it was concluded that the mixtures containing waste plastic bottles have lower OAC values compared to the conventional mixture, and this may reduce the amount of asphalt binder can be used in road construction projects. Besides, the mixtures containing waste plastic showed significantly greater fatigue resistance than the conventional mixture.

  8. Innovative Design of Plastic Bottle Recycling Box Based on ARM

    Directory of Open Access Journals (Sweden)

    Yuedong Xiong

    2014-04-01

    Full Text Available Aiming at the problems of on-site plastic bottles recycling and the reuse of waste, the automatic recycling system was developed on the basis of ARM. As the main controller, ARM not only controls the mechanical system of the collector to recover and break plastic bottles, but also communicates with and rewards the user by the automatic reward system through the wireless network. The experimental prototype test results show: post treated fragments of plastic bottles are small, which are convenient to transport and take advantage of; the operation of recovery is easy, and the interface of man-machine interaction is friendly which is easy to expand functions.

  9. Effect of bottling and storage on the migration of plastic constituents in Spanish bottled waters.

    Science.gov (United States)

    Guart, Albert; Bono-Blay, Francisco; Borrell, Antonio; Lacorte, Silvia

    2014-08-01

    Bottled water is packaged in either glass or, to a large extent, in plastic bottles with metallic or plastic caps of different material, shape and colour. Plastic materials are made of one or more monomers and several additives that can eventually migrate into water, either during bottle manufacturing, water filling or storage. The main objective of the present study was to carry out a comprehensive assessment of the quality of the Spanish bottled water market in terms of (i) migration of plastic components or additives during bottling and during storage and (ii) evaluation of the effect of the packaging material and bottle format on the migration potential. The compounds investigated were 5 phthalates, diethylhexyl adipate, alkylphenols and bisphenol A. A set of 362 bottled water samples corresponding to 131 natural mineral waters and spring waters sources and 3 treated waters of several commercial brands were analysed immediately after bottling and after one-year storage (a total of 724 samples). Target compounds were detected in 5.6% of the data values, with diethyl hexyl phthalate and bisphenol A being the most ubiquitous compounds detected. The total daily intake was estimated and a comparison with reference values was indicated.

  10. Study on the Plastic Bottle Recycling Based on Evolution Tree for Technical System

    OpenAIRE

    Yuedong Xiong; Huadong Huang

    2014-01-01

    Technical system theory of evolution tree was used in the study of the plastic bottle recycling, and established the evolutionary line of plastic bottle recycling on the basis of the analysis of plastic bottle recycling recovery evolution tree, and summed up a new smart plastic bottle recycling program. The new recovery recovers and smashes the plastic bottles through technical system, and communicates with users through automatically reward system and rewards the latter. The experimental pro...

  11. Raman and AFM study of gamma irradiated plastic bottle sheets

    Science.gov (United States)

    Ali, Yasir; Kumar, Vijay; Sonkawade, R. G.; Dhaliwal, A. S.

    2013-02-01

    In this investigation, the effects of gamma irradiation on the structural properties of plastic bottle sheet are studied. The Plastic sheets were exposed with 1.25MeV 60Co gamma rays source at various dose levels within the range from 0-670 kGy. The induced modifications were followed by micro-Raman and atomic force microscopy (AFM). The Raman spectrum shows the decrease in Raman intensity and formation of unsaturated bonds with an increase in the gamma dose. AFM image displays rough surface morphology after irradiation. The detailed Raman analysis of plastic bottle sheets is presented here, and the results are correlated with the AFM observations.

  12. The Use of Plastic Lemonade Bottles as Fermenter Reaction Vessels.

    Science.gov (United States)

    Walker, David; Howard, Barry

    1988-01-01

    Describes the construction and uses of a low cost fermenter reaction vessel which is suitable for laboratory growth of microorganisms by continuous and batch cultures from plastic soft drink bottles. Lists materials, discusses modifications that can be made and gives examples of use. (CW)

  13. Comparative recovery of microorganisms from BacT/ALERT plastic and glass FA and FN blood culture bottles.

    Science.gov (United States)

    Riley, J A; Heiter, B J; Bourbeau, P P

    2005-07-01

    bioMerieux, Inc., has recently introduced plastic bottles to replace glass bottles for use in the BacT/ALERT blood culture system. We compared the performance of the plastic to the glass bottles in a large clinical evaluation. Two blood cultures were collected from each patient, one using glass FA (aerobic) and FN (anaerobic) bottles and one using plastic FA and FN bottles. Of the 4,040 sets of four bottles collected, 3,110 contained the recommended 8 to 12 ml of blood, yielding 524 microorganisms with 359 judged to be clinically significant. Of the 359 significant organisms, 255 were recovered in either one or two bottles from both pairs of bottles in a set while 56 organisms were recovered only from the glass bottles and 48 were recovered only from the plastic bottles (P, not significant [NS]). Of the 286 significant organisms recovered only in the FA bottles (glass and plastic), 180 were recovered in both bottles, 57 in the plastic bottles only, and 49 in the glass bottles only (P, NS). Of the 303 significant organisms recovered in the FN bottles only (glass and plastic), 212 were recovered in both bottles, 46 in the plastic bottles only, and 45 in the glass bottles only (P, NS). For individual organisms, the only significant difference in recovery was obtained for Escherichia coli, with more isolates recovered in the FN plastic than in the FN glass bottles (P = 0.02). These data suggest that recovery of microorganisms with plastic FA/FN bottles is at least equal to that with glass FA/FN bottles while offering greater safety for users.

  14. Exploring the Gas Chemistry of Old Submarine Technologies Using Plastic Bottles as Reaction Vessels and Models

    Science.gov (United States)

    Horikoshi, Ryo; Takeiri, Fumitaka; Kobayashi, Yoji; Kageyama, Hiroshi

    2016-01-01

    We describe an activity that is suitable for high school students and makes use of plastic bottles. This activity allows students to familiarize themselves with gas chemistry by introducing technologies that were applied in old submarine systems. Plastic bottles, which are representative of submarines, are used as reaction vessels. Three simple…

  15. Consumer exposure to Bisphenol A from plastic bottles

    Science.gov (United States)

    Bidabadi, Fatemeh

    Bisphenol A (BPA) is a plastic monomer and plasticizer and is a chemical that has one of the highest volume production worldwide, with more than six billion pounds each year. Its' primary use is the production of polycarbonate plastics, epoxy resins used to line metal cans in a host of plastic consumer products such as toys, water pipes, drinking containers, eyeglass lenses, sports safety equipment as well as consumer electronics. Studies have shown that BPA is leached from lacquer coated cans and baby feeding bottles due to hydrolysis of the Polymer during thermal treatment. Studies have also shown that even under normal use BPA may leach from food and beverage containers. For many years Bisphenol A was treated as neutral to human health. The detection of BPA in drinking water and food products has raised the interest of many researches since 1990. Thousands of studies have examined the impact of BPA to determine its effects in laboratory animals. Numerous toxicological and biochemical studies have supported that BPA has estrogenic properties. The effects of exposure to BPA can be harmful to fetus, infants and young children. BPA is used in products where traces of it can be found in every human at higher levels of concentration than that which causes problems in animals. The National Institute for Environmental Health Sciences (NIEHS) has defined "low dose" of endocrine disrupting chemicals as doses below no observable adverse effect (NOAE) for specific chemicals. In BPA, this dose is 50 mg/kg of body weight per day. Today there are more than 150 published results describing how low doses of BPA effects animals. A recent study reported that adult female mice, monkeys, and humans metabolized BPA at almost identical rates. Since the level of BPA and other endocrine chemicals appears to be increasing throughout the World, especially where plastics are prevalent, it is extremely important to study the effects of this chemical on man and wildlife. This research effort

  16. Comparative Recovery of Microorganisms from BacT/ALERT Plastic and Glass FA and FN Blood Culture Bottles

    OpenAIRE

    Riley, J. A.; Heiter, B J; Bourbeau, P P

    2005-01-01

    bioMerieux, Inc., has recently introduced plastic bottles to replace glass bottles for use in the BacT/ALERT blood culture system. We compared the performance of the plastic to the glass bottles in a large clinical evaluation. Two blood cultures were collected from each patient, one using glass FA (aerobic) and FN (anaerobic) bottles and one using plastic FA and FN bottles. Of the 4,040 sets of four bottles collected, 3,110 contained the recommended 8 to 12 ml of blood, yielding 524 microorga...

  17. Validation of Performance of Plastic versus Glass Bottles for Culturing Anaerobes from Blood in BacT/ALERT SN Medium

    OpenAIRE

    Mirrett, Stanley; Joyce, Maria J.; Reller, L. Barth

    2005-01-01

    To validate performance, we compared the new plastic BacT/ALERT (bioMérieux, Durham, NC) SN bottle to the current glass SN bottle with samples of blood obtained for culture from adults and found them comparable for both recovery and speed of detection of microorganisms. We conclude that the safety advantage of plastic bottles can be achieved without compromising performance.

  18. Validation of performance of plastic versus glass bottles for culturing anaerobes from blood in BacT/ALERT SN medium.

    Science.gov (United States)

    Mirrett, Stanley; Joyce, Maria J; Reller, L Barth

    2005-12-01

    To validate performance, we compared the new plastic BacT/ALERT (bioMérieux, Durham, NC) SN bottle to the current glass SN bottle with samples of blood obtained for culture from adults and found them comparable for both recovery and speed of detection of microorganisms. We conclude that the safety advantage of plastic bottles can be achieved without compromising performance.

  19. Community challenges when using large plastic bottles for Solar Energy Disinfection of Water (SODIS)

    National Research Council Canada - National Science Library

    Borde, Preeti; Elmusharaf, Khalifa; McGuigan, Kevin G; Keogh, Michael B

    2016-01-01

    .... The exposure to sunlight is typically carried out in small volume plastic beverage bottles (up to 2 l). Given the water requirements of consumption and basic personal hygiene, this may not always meet the needs of communities...

  20. Migration of bisphenol A and nonylphenol from mineral water bottles and disposable plastic containers into water at different temperatures

    National Research Council Canada - National Science Library

    Ali Kazemi; Habibollah Younesi; Nader Bahramifar

    2013-01-01

    Background and Objectives: bisphenol A and nonylphenol are xenoestrogen materials used as a monomer of plastics in widely volume in the production of plastic materials especially mineral water bottles and disposable plastic containers...

  1. Performance of Hot Asphalt Mixtures Containing Plastic Bottles as Additive

    Directory of Open Access Journals (Sweden)

    Jan Hakeem

    2017-01-01

    Full Text Available This study focuses on evaluating the resistance of polymer modified asphalt mixes and the role played by asphalt in the realm of construction is undeniably important. Addition of polymers(PB as additives to asphalt helps to improve the strength and water repellent property of the mix and as well as helps environment in various ways and at the same time, analyzing its lower maintenance activities and service life is most important. The use of inexpensive polymers, in this case, waste polymers has without any doubt proven to be the most convenient way of reducing the cost of construction and at the same time maintaining quality. The main resolve for this research was to establish the effects of the use of plastic bottles on hot asphalt and its mixtures. In order to put this into perspective, varying percentages of asphalt mixtures were calculated and subjected to laboratory tests. The two-factor variance analysis (ANOVA was conducted to determine the significance at various confidence limits. The results indicate that the inclusion of Polyethylene Terephthalate (PET had a particularly substantial effect on the properties of asphalt. Consequently, it can encourage the re-utilization of waste in the manufacturing industry in an ecologically friendly and cost-effective way.

  2. Controlled clinical comparison of plastic versus glass bottles of BacT/ALERT PF medium for culturing blood from children.

    Science.gov (United States)

    Petti, Cathy A; Mirrett, Stanley; Woods, Christopher W; Reller, L Barth

    2005-01-01

    The plastic pediatric BacT/ALERT (bioMérieux, Durham, N.C.) PF (PPF) is a new nonvented aerobic culture medium in a clear plastic bottle designed to prevent breakage. We compared the performance of the new PPF bottle to that of the present glass BacT/ALERT PF bottle for the recovery of microorganisms as well as for the time to detection of growth in samples of blood obtained for culture from children. We found that the PPF and PF bottles were comparable for recovery of microorganisms and that the safety advantage of plastic bottles can be achieved without compromising performance.

  3. Heat Transfer in Glass, Aluminum, and Plastic Beverage Bottles

    Science.gov (United States)

    Clark, William M.; Shevlin, Ryan C.; Soffen, Tanya S.

    2010-01-01

    This paper addresses a controversy regarding the effect of bottle material on the thermal performance of beverage bottles. Experiments and calculations that verify or refute advertising claims and represent an interesting way to teach heat transfer fundamentals are described. Heat transfer coefficients and the resistance to heat transfer offered…

  4. Heat Transfer in Glass, Aluminum, and Plastic Beverage Bottles

    Science.gov (United States)

    Clark, William M.; Shevlin, Ryan C.; Soffen, Tanya S.

    2010-01-01

    This paper addresses a controversy regarding the effect of bottle material on the thermal performance of beverage bottles. Experiments and calculations that verify or refute advertising claims and represent an interesting way to teach heat transfer fundamentals are described. Heat transfer coefficients and the resistance to heat transfer offered…

  5. Application of automated image analysis to the identification and extraction of recyclable plastic bottles

    Institute of Scientific and Technical Information of China (English)

    Edgar SCAVINO; Dzuraidah Abdul WAHAB; Aini HUSSAIN; Hassan BASRI; Mohd Marzuki MUSTAFA

    2009-01-01

    An experimental machine vision apparatus was used to identify and extract recyclable plastic bottles out of a conveyor belt. Color images were taken with a commercially available Webcam, and the recognition was performed by our homemade software, based on the shape and dimensions of object images. The software was able to manage multiple bottles in a single image and was additionally extended to cases involving touching bottles. The identification was fulfilled by comparing the set of measured features with an existing database and meanwhile integrating various recognition techniques such as minimum distance in the feature space, self-organized maps, and neural networks. The recognition system was tested on a set of 50 different bottles and provided so far an accuracy of about 97% on bottle identification. The extraction of the bottles was performed by means of a pneumatic arm, which was activated according to the plastic type; polyethylene-terephthalate (PET) bottles were left on the conveyor belt, while non-PET boules were extracted. The software was designed to provide the best compromise between reliability and speed for real-time applications in view of the commercialization of the system at existing recycling plants.

  6. Consumer Exposure to Bisphenol A from Plastic Bottles

    Science.gov (United States)

    Bidabadi, Fatemeh

    2013-01-01

    Bisphenol A (BPA) is a plastic monomer and plasticizer and is a chemical that has one of the highest volume production worldwide, with more than six billion pounds each year. Its primary use is the production of polycarbonate plastics, epoxy resins used to line metal cans in a host of plastic consumer products such as toys, water pipes, drinking…

  7. Trash + Creativity = Problem Solved: Award Winners Give Plastic Bottles Second Life

    Science.gov (United States)

    Tech Directions, 2007

    2007-01-01

    Judge Harry T. Roman, an electrical engineer and inventor, has selected the best of the crop in the 2006/2007 Tech Directions Inventors Award Competition. The challenge this year called on students to slow the filling of landfills by devising uses for discarded plastic water, juice, soda, and sports-drink bottles. Judge Roman noted "many common…

  8. Spark Ignition of Combustible Vapor in a Plastic Bottle as a Demonstration of Rocket Propulsion

    Science.gov (United States)

    Mattox, J. R.

    2017-01-01

    I report an innovation that provides a compelling demonstration of rocket propulsion, appropriate for students of physics and other physical sciences. An electrical spark is initiated from a distance to cause the deflagration of a combustible vapor mixed with air in a lightweight plastic bottle that is consequently propelled as a rocket by the…

  9. How consumers of plastic water bottles are responding to environmental policies?

    Science.gov (United States)

    Orset, Caroline; Barret, Nicolas; Lemaire, Aurélien

    2017-03-01

    Although plastic induces environmental damages, almost all water bottles are made from plastic and the consumption never stops increasing. This study evaluates the consumers' willingness to pay (WTP) for different plastics used for water packaging. Successive messages emphasizing the characteristics of plastic are delivered to consumers allowing explaining the influence of information on the consumers' WTP. We find that information has a manifest effect on the WTP. We show there is a significant premium associated with recycled plastic packaging and biodegradable bioplastic packaging. As there is no consensus on the plastic which is the most or the least dangerous for the environment, we propose different policies for protecting the environment. We discuss about the impact of these policies on consumer's purchasing decisions: switching one plastic packaging for another, or leaving water plastic bottles market. We present the environmental policies that are effective according to the point of view adopted. Choosing between these policies then depends on the priorities of the regulator and pressure of lobbies.

  10. Spark Ignition of Combustible Vapor in a Plastic Bottle as a Demonstration of Rocket Propulsion

    Science.gov (United States)

    Mattox, J. R.

    2017-01-01

    I report an innovation that provides a compelling demonstration of rocket propulsion, appropriate for students of physics and other physical sciences. An electrical spark is initiated from a distance to cause the deflagration of a combustible vapor mixed with air in a lightweight plastic bottle that is consequently propelled as a rocket by the release of combustion products, i.e., a "whoosh rocket." My recommendation is that the standard fuel for pedagogical whoosh demonstrations be isopropanol, and the recommended vessel is the 3.8-L high-density polyethylene (HDPE) bottle.

  11. Histogram of Intensity Feature Extraction for Automatic Plastic Bottle Recycling System Using Machine Vision

    Directory of Open Access Journals (Sweden)

    Suzaimah Ramli

    2008-01-01

    Full Text Available Currently, many recycling activities adopt manual sorting for plastic recycling that relies on plant personnel who visually identify and pick plastic bottles as they travel along the conveyor belt. These bottles are then sorted into the respective containers. Manual sorting may not be a suitable option for recycling facilities of high throughput. It has also been noted that the high turnover among sorting line workers had caused difficulties in achieving consistency in the plastic separation process. As a result, an intelligent system for automated sorting is greatly needed to replace manual sorting system. The core components of machine vision for this intelligent sorting system is the image recognition and classification. In this research, the overall plastic bottle sorting system is described. Additionally, the feature extraction algorithm used is discussed in detail since it is the core component of the overall system that determines the success rate. The performance of the proposed feature extractions were evaluated in terms of classification accuracy and result obtained showed an accuracy of more than 80%.

  12. Characteristics of bacterial and fungal growth in plastic bottled beverages under a consuming condition model.

    Science.gov (United States)

    Watanabe, Maiko; Ohnishi, Takahiro; Araki, Emiko; Kanda, Takashi; Tomita, Atsuko; Ozawa, Kazuhiro; Goto, Keiichi; Sugiyama, Kanji; Konuma, Hirotaka; Hara-Kudo, Yukiko

    2014-01-01

    Microbial contamination in unfinished beverages can occur when drinking directly from the bottle. Various microorganisms, including foodborne pathogens, are able to grow in these beverages at room temperature or in a refrigerator. In this study, we elucidated the characteristics of microorganism growth in bottled beverages under consuming condition models. Furthermore, we provide insight into the safety of partially consumed bottled beverages with respect to food hygiene. We inoculated microorganisms, including foodborne pathogens, into various plastic bottled beverages and analysed the dynamic growth of microorganisms as well as bacterial toxin production in the beverages. Eight bottled beverage types were tested in this study, namely green tea, apple juice drink, tomato juice, carbonated drink, sport drink, coffee with milk, isotonic water and mineral water, and in these beverages several microorganism types were used: nine bacteria including three toxin producers, three yeasts, and five moulds. Following inoculation, the bottles were incubated at 35°C for 48 h for bacteria, 25°C for 48 h for yeasts, and 25°C for 28 days for moulds. During the incubation period, the number of bacteria and yeasts and visible changes in mould-growth were determined over time. Our results indicated that combinations of the beverage types and microorganism species correlated with the degree of growth. Regarding factors that affect the growth and toxin-productivity of microorganisms in beverages, it is speculated that the pH, static/shaking culture, temperature, additives, or ingredients, such as carbon dioxide or organic matter (especially of plant origin), may be important for microorganism growth in beverages. Our results suggest that various types of unfinished beverages have microorganism growth and can include food borne pathogens and bacterial toxins. Therefore, our results indicate that in terms of food hygiene it is necessary to consume beverages immediately after opening

  13. Controlled clinical comparison of plastic and glass bottles of BacT/ALERT FA medium for culturing organisms from blood of adult patients.

    Science.gov (United States)

    Petti, Cathy A; Mirrett, Stanley; Woods, Christopher W; Reller, L Barth

    2005-04-01

    A new, clear-plastic nonvented aerobic FA bottle, designed to prevent breakage, has been developed for the BacT/ALERT blood culture system. We assessed the new plastic FA bottle by comparing its performance with that of the current glass FA bottle for recovery of microorganisms and time to detection of growth in blood samples obtained for culture from adult patients with suspected bloodstream infections. We conclude that the BacT/ALERT plastic and glass FA bottles are comparable for recovery of microorganisms and that the safety advantage of plastic bottles can be achieved without compromising performance.

  14. Simultaneous Sterilization With Surface Modification Of Plastic Bottle By Plasma-Based Ion Implantation

    Science.gov (United States)

    Sakudo, N.; Ikenaga, N.; Ikeda, F.; Nakayama, Y.; Kishi, Y.; Yajima, Z.

    2011-01-01

    Dry sterilization of polymeric material is developed. The technique utilizes the plasma-based ion implantation which is same as for surface modification of polymers. Experimental data for sterilization are obtained by using spores of Bacillus subtilis as samples. On the other hand we previously showed that the surface modification enhanced the gas barrier characteristics of plastic bottles. Comparing the implantation conditions for the sterilization experiment with those for the surface modification, we find that both sterilization and surface modification are simultaneously performed in a certain range of implantation conditions. This implies that the present bottling system for plastic vessels will be simplified and streamlined by excluding the toxic peroxide water that has been used in the traditional sterilization processes.

  15. Plastic Bottle Cutter:能瞬间将塑料瓶变成塑料绳

    Institute of Scientific and Technical Information of China (English)

    2016-01-01

    近日法国两名设计者开发了一款Plastic BottleCutter塑料瓶切割器,能瞬间将各种塑料瓶变成可再利用的塑料绳。这款切割器的设计十分简单,由一根木棍及一个可替换的刀片组成。Plastic BottleCutter能将塑料瓶转换成各种宽度的塑料绳,在回收后能重新被用于制造出各种物品,包括扫帚、篮子、门帘等等日常用品。这些塑料绳甚至能被当成汽车拉绳使用。

  16. Plastic bottle oscillator as an on-off-type oscillator: Experiments, modeling, and stability analyses of single and coupled systems

    Science.gov (United States)

    Kohira, Masahiro I.; Kitahata, Hiroyuki; Magome, Nobuyuki; Yoshikawa, Kenichi

    2012-02-01

    An oscillatory system called a plastic bottle oscillator is studied, in which the downflow of water and upflow of air alternate periodically in an upside-down plastic bottle containing water. It is demonstrated that a coupled two-bottle system exhibits in- and antiphase synchronization according to the nature of coupling. A simple ordinary differential equation is deduced to interpret the characteristics of a single oscillator. This model is also extended to coupled oscillators, and the model reproduces the essential features of the experimental observations.

  17. New absorbent acoustic materials from plastic bottle remnants

    Directory of Open Access Journals (Sweden)

    del Rey, R.

    2011-12-01

    Full Text Available In the building acoustics field usually fibrous materials are used as sound absorbing materials. Nowadays polyester fiber is one of the most used but the pure chip of polyester has a problem. Polyester is obtained of petroleum and its price was increasing last years. This paper, presents an alternative polyester wool which obtained by PET treatment (recycle of plastic bottle’s. Absorption coefficient values at normal incidence measured in reverberation chamber were compared (new wool obtained by PET method and materials obtained from pure chip of polyester.Furthermore, this paper propound a empiric model that describe the acoustic performance of this new wool. The results have been good. The pure fiber has been replaced by recycle fiber in its manufacture process.

    En el ámbito de acústica de la edificación es común el uso de materiales fibrosos como materiales absorbentes acústicos. Uno de estos materiales cada vez más utilizado es la lana de poliéster. Un problema que presenta el chip virgen de poliéster es que se obtiene del petróleo, cuyo precio no hace más que incrementarse en los últimos años. En este trabajo se presenta una lana de poliéster alternativa, obtenida mediante el tratamiento del PET, a través del conveniente ciclo de reciclado de botellas de plástico. Se comparan valores del coeficiente de absorción; en incidencia normal y en cámara reverberante de los materiales elaborados a partir de chip virgen y de las nuevas lanas obtenidas del PET. Además, se propone un modelo empírico de comportamiento acústico de estas nuevas lanas. Los resultados obtenidos han sido favorables, la fibra virgen ya ha sido sustituida por fibra reciclada en su proceso de fabricación.

  18. A complete life cycle assessment of high density polyethylene plastic bottle

    Science.gov (United States)

    Treenate, P.; Limphitakphong, N.; Chavalparit, O.

    2017-07-01

    This study was aimed to determine environmental performances of a lubricant oil bottle made from high density polyethylene and to develop potential measures for reducing its impacts. A complete life cycle assessment was carried out to understand a whole effect on the environment from acquiring, processing, using, and disposing the product. Two scenarios of disposal phase; recycle and incineration: were examined to quantify a lesser degree on environmental impact. The results illustrated that major impacts of the two scenarios were at the same categories with the highest contributor of raw material acquisition and pre-processing. However, all impacts in case of recycling provided a lower point than that in case of incineration, except mineral extraction. Finally, feasible measures for reducing the environmental impact of high density polyethylene plastic bottle were proposed in accordance with 3Rs concept.

  19. Controlled Clinical Comparison of Plastic and Glass Bottles of BacT/ALERT FA Medium for Culturing Organisms from Blood of Adult Patients

    OpenAIRE

    Petti, Cathy A.; Mirrett, Stanley; Woods, Christopher W.; Reller, L. Barth

    2005-01-01

    A new, clear-plastic nonvented aerobic FA bottle, designed to prevent breakage, has been developed for the BacT/ALERT blood culture system. We assessed the new plastic FA bottle by comparing its performance with that of the current glass FA bottle for recovery of microorganisms and time to detection of growth in blood samples obtained for culture from adult patients with suspected bloodstream infections. We conclude that the BacT/ALERT plastic and glass FA bottles are comparable for recovery ...

  20. Solar detoxification plant for a hazardous plastic bottle recycling plant in El Ejido: feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Blanco, J.; Malato, S. [CIEMAT, Plataforma Solar de Almeria (PSA), Tabernas (Spain); Richter, C. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V., Koeln (Germany)

    1997-12-31

    The removal of persistent organic chemicals from water is a pressing ecological problem. Persistent contaminants, such as pesticides, solvents, detergents and a variety of industrial chemicals, are capable of deep penetration into the soil and reach groundwater due to combination of chemical stability, resistance to biodegradation and sufficient water solubility. The Spanish province of Almeria has experienced an important economical growth during the last 20 years due to the installation of a large number of greenhouses, which benefit from the extremely sunny climate for production of vegetables and fruits. Unfortunately, this development is accompanied by an intensive use of a wide variety of pesticides with the subsequent problem of empty plastic bottles. Unitl now these plaguicide containers have usually been burnt or buried. Since the problem has been growing in the last years, a parallel environmental consciousness has been rising in the region concerning the recycling of these pesticide bottles; this process includes washing of the shredded plastic containers, which gives rise to relatively small quantities of water contaminated with toxic and persistent compounds at a concentration level of some hundred mg/l of total organic carbon content. This appears to be a very promising application for TiO{sub 2} - Solar Photocatalytic Detoxification, which provides an adequate solution as there is no clear alternative way to solve the problem. (orig.)

  1. Effect of reduced pressure, vibration and orientation to simulate high altitude testing of liquid pharmaceutical glass and plastic bottles

    NARCIS (Netherlands)

    Singh, S. Paul; Burgess, Gary; Kremer, Matt; Lockhart, Hugh

    2007-01-01

    This paper discusses the impact of high-altitude shipments of glass and plastic bottles on package integrity. High altitudes are encountered when trucks travel over mountain passes and when cargo and feeder aircraft transport packages in non-pressurized or partially pressurized cargo holds. This is

  2. Effect of gamma irradiation on the properties of plastic bottle sheet

    Science.gov (United States)

    Kumar, Vijay; Ali, Yasir; Sonkawade, R. G.; Dhaliwal, A. S.

    2012-09-01

    In this article, the effects of gamma irradiation on the optical and structural properties of plastic bottle sheets have been studied. Bottle sheets were exposed with 1.25 MeV 60Co γ-ray's source at various dose levels within the range from 0 to 670 kGy. The changes so induced were analyzed by using UV-Vis and X-ray diffraction spectroscopy. UV-Vis spectra show the peaks, their shifting and broadening as a result of gamma irradiation. With increasing γ-dose, the values of the direct and indirect band gap are found to be decreased. These results are in good agreement with the corresponding results published previously for polyethylene terephthalate polymer. We also calculated numbers of carbon atoms per conjugation length. The X-ray diffraction spectra exhibited an increase in peak intensity after gamma irradiation. Furthermore, the percentage crystallinity and crystallite size for pristine and irradiated sample have been calculated. It has been found that both crystallinity and crystallite size increase due to irradiation. In addition, interchain distances, micro strain, inter planar distance, dislocation density and distortion parameters were calculated. The analysis revealed there is the significant decrease in micro strain, dislocation density and distortion parameters with an increase of gamma dose, which is in line with the crystallinity calculation. Moreover, Interchain and Interplanar distances were marginally changed. These results demonstrated the applicability of sheets as a cost-effective dosimeter.

  3. Recycling of polyethylene terephthalate (PET plastic bottle wastes in bituminous asphaltic concrete

    Directory of Open Access Journals (Sweden)

    Adebayo Olatunbosun Sojobi

    2016-12-01

    Full Text Available This research sheds light on the concept of eco-friendly road construction which comprises eco-design, eco-extraction, eco-manufacturing, eco-construction, eco-rehabilitation, eco-maintenance, eco-demolition, and socioeconomic empowerment. It also revealed the challenges being faced in its adoption and the benefits derivable from its application. Furthermore, the effects of recycling PET plastic bottle wastes produced in North Central Nigeria in bituminous asphaltic concrete (BAC used in flexible pavement construction were also evaluated. The mix design consists of 60/70 penetration-grade asphaltic concrete (5%, 68% coarse aggregate, 6% fine aggregate, and 21% filler using the dry process at 170°C. The optimum bitumen content (OBC for conventional BAC was obtained as 4% by weight of total aggregates and filler. Polymer-coated aggregate (PCA-modified BAC seems preferable because it has the potential to utilize more plastic wastes with a higher optimum plastic content (OPC of 16.7% by weight of total aggregates and filler compared to that of 9% by weight of OBC achieved by PMB-BAC. For both PMB- and PCA-modified BAC, an increase in air void, void in mineral aggregate, and Marshall stability were observed. Eco-friendly road construction which recycles PET wastes should be encouraged by government considering its potential environmental and economic benefits.

  4. Microbiological Investigations of ReNu Plastic Bottles and the 2004 to 2006 ReNu With MoistureLoc-Related Worldwide Fusarium Keratitis Event.

    Science.gov (United States)

    Bullock, John D; Warwar, Ronald E; Elder, B Laurel; Khamis, Harry J

    2016-05-01

    The purposes of this study were to determine whether the contact lens solution RevitaLens Ocutec (containing the antimicrobial agents alexidine and polyquaternium-1) would inhibit Fusarium organisms when heated in ReNu plastic bottles; whether alexidine would inhibit Fusarium organisms when heated in non-ReNu plastic bottles; and whether an alexidine-neutralizing compound leaches from heated ReNu bottles. RevitaLens and an alexidine solution (0.00045%), previously stored in ReNu bottles at room temperature (RT) and 56°C, were incubated with 7 different Fusarium organisms. The alexidine solution was similarly stored in seven non-ReNu plastic bottles and incubated with these same organisms. To determine if an alexidine-neutralizing compound might be leaching from heated ReNu bottles, phosphate-buffered saline (PBS) was incubated at RT and 56°C in ReNu bottles, combined with alexidine, and then tested for anti-Fusarium capability. After being heated in ReNu bottles, RevitaLens retained its anti-Fusarium capability, whereas the alexidine solution did not. The alexidine solution heated in seven non-ReNu plastic bottles retained its anti-Fusarium capability. The alexidine solution retained its anti-Fusarium capability when incubated with a PBS solution that had been heated in ReNu bottles, indicating, microbiologically, that an alexidine-neutralizing compound did not leach from the heated ReNu bottle. Alexidine uniquely fails to inhibit Fusarium organisms when heated in a plastic ReNu bottle, but not in seven other plastic bottles, whereas the anti-Fusarium capability of RevitaLens (containing the antimicrobial agents alexidine and polyquaternium-1) is unaffected by heating in a ReNu bottle. There does not seem to be an alexidine-neutralizing compound leaching from heated ReNu bottles. An interaction between alexidine and its heated ReNu bottle may have been a critical factor in the worldwide ReNu with MoistureLoc-related Fusarium keratitis event of 2004 to 2006.

  5. Microbes on a Bottle: Substrate, Season and Geography Influence Community Composition of Microbes Colonizing Marine Plastic Debris.

    Science.gov (United States)

    Oberbeckmann, Sonja; Osborn, A Mark; Duhaime, Melissa B

    2016-01-01

    Plastic debris pervades in our oceans and freshwater systems and the potential ecosystem-level impacts of this anthropogenic litter require urgent evaluation. Microbes readily colonize aquatic plastic debris and members of these biofilm communities are speculated to include pathogenic, toxic, invasive or plastic degrading-species. The influence of plastic-colonizing microorganisms on the fate of plastic debris is largely unknown, as is the role of plastic in selecting for unique microbial communities. This work aimed to characterize microbial biofilm communities colonizing single-use poly(ethylene terephthalate) (PET) drinking bottles, determine their plastic-specificity in contrast with seawater and glass-colonizing communities, and identify seasonal and geographical influences on the communities. A substrate recruitment experiment was established in which PET bottles were deployed for 5-6 weeks at three stations in the North Sea in three different seasons. The structure and composition of the PET-colonizing bacterial/archaeal and eukaryotic communities varied with season and station. Abundant PET-colonizing taxa belonged to the phylum Bacteroidetes (e.g. Flavobacteriaceae, Cryomorphaceae, Saprospiraceae-all known to degrade complex carbon substrates) and diatoms (e.g. Coscinodiscophytina, Bacillariophytina). The PET-colonizing microbial communities differed significantly from free-living communities, but from particle-associated (>3 μm) communities or those inhabiting glass substrates. These data suggest that microbial community assembly on plastics is driven by conventional marine biofilm processes, with the plastic surface serving as raft for attachment, rather than selecting for recruitment of plastic-specific microbial colonizers. A small proportion of taxa, notably, members of the Cryomorphaceae and Alcanivoraceae, were significantly discriminant of PET but not glass surfaces, conjuring the possibility that these groups may directly interact with the PET

  6. Identification and quantification of the migration of chemicals from plastic baby bottles used as substitutes for polycarbonate.

    Science.gov (United States)

    Simoneau, C; Van den Eede, L; Valzacchi, S

    2012-01-01

    The results of a study on the analytical identification and quantification of migration of chemicals from plastics baby bottles found in the European Union market made of materials that are now present as substitutes for polycarbonate (PC) are reported. A total of 449 baby bottles with a focus on first age or sets of bottles were purchased from 26 European Union countries, Canada, Switzerland and the USA. From this collection, which contained several duplicates, a total of 277 baby bottles were analysed. The materials included different types of plastic such as PC, polyamide (PA), polyethersulphone (PES), polypropylene (PP), but also silicone, and from the United States a co-polyester marketed under the trade name Tritan™. The bottles were subjected to the conventional migration test for hot fill conditions, i.e. 2 h at 70°C. The simulant used was that specified in European Union legislation (2007/19/EC) for milk, i.e. 50% ethanol. In a first phase 1, migration was conducted since the scope of this investigation was a screening rather than a true compliance testing check. Second and third migrations were performed on selected articles when migrated substances exceeded limits specified in the legislation. In order to verify some materials, a portion of the bottle was cut to run an FT-IR fingerprint to confirm the nature of the polymer. The migration solutions in general showed a low release of substances. Results showed that bottles made of PP and silicones showed a greater number of substances in the migration solutions and in greater quantity. Chemicals from PP included alkanes, which could be found in >65% of the bottles at levels up to 3500 µg kg⁻¹; and benzene derivatives in 17% of the baby bottles and found at levels up to 113 µg kg⁻¹. Some substances were found on a regular basis such as plasticisers, esters and antioxidants (e.g. tris(2,4-di-tert-butylphenyl)phosphate, known as Irgafos 168. Some substances found were not included in the

  7. Glass vs. Plastic: Life Cycle Assessment of Extra-Virgin Olive Oil Bottles across Global Supply Chains

    Directory of Open Access Journals (Sweden)

    Riccardo Accorsi

    2015-03-01

    Full Text Available The environmental impacts of global food supply chains are growing with the need for their measurement and management. This paper explores the operations of a global supply chain for extra-virgin olive oil (EVOO according to a life cycle assessment (LCA methodology. The LCA assessment methodology is applied to determine the environmental impact categories associated with the bottled EVOO life cycle, focusing on packaging decisions. The proposed analysis identifies the greatest environmental stressors of the EVOO supply chain, thereby supporting strategic and operative decisions toward more efficient and environmentally-friendly operations management and packaging choices. This paper quantifies the environmental categories of the impacts of global warming potential, ozone layer depletion, non-renewable energy use, acidification, eutrophication and photochemical smog, for the observed EVOO supply chain, given alternative packaging configurations, i.e., a glass bottle vs. a plastic bottle. The observed system includes the supply of EVOO, the EVOO processing and bottling, the supply of packaging, the distribution of final products to customers, the end-of-life (EOL treatments regarding the management, recycling and the disposal of waste across a global supply chain. The findings from the LCA highlight the potential of PET bottles in reducing the environmental impact of EVOO supply chains and identifies hotspots of discussion for policy-makers, EVOO producers and consumers.

  8. Chemical contamination of soft drinks in sealed plastic bottles by environmental stress cracking.

    Science.gov (United States)

    Muller, Dan; Israelsohn-Azulay, Osnat

    2009-01-01

    A contamination of soft drinks in sealed bottles by organic solvents is reported: closed bottles full of soft drinks were accidentally placed on a cardboard soaked with thinner and the organic fluid subsequently fissured the bottom of the bottles and penetrated into the soft drinks without any apparent leakage of the soft drinks. Experiments were carried out to simulate the process: the penetration of different organic solvents into soft drinks through the bottom of closed bottles was tested. The penetration occurred only when the closed bottles contained carbonated soft drinks (CSD), indicating that inner pressure is a necessary condition for the fissuring of the bottles. This paper discusses environmental stress cracking of polyethylene terephthalate (PET) bottles by organic solvents and migration of chemicals to CSD. Experiments were conducted to determine the conditions in which PET can be permeable to poisoning organic products.

  9. Constructing a Plastic Bottle Wind Turbine as a Practical Aid for Learning about Using Wind Energy to Generate Electricity

    Science.gov (United States)

    Appleyard, S. J.

    2009-01-01

    A simple horizontal axis wind turbine can be easily constructed using a 1.5 l PET plastic bottle, a compact disc and a small dynamo. The turbine operates effectively at low wind speeds and has a rotational speed of 500 rpm at a wind speed of about 14 km h[superscript -1]. The wind turbine can be used to demonstrate the relationship between open…

  10. [Simultaneous determination of 11 bisphenols in plastic bottled drinking water by ultra performance liquid chromatography-tandem mass spectrometry].

    Science.gov (United States)

    Gou, Xinlei; Gao, Xia; Hu, Guanghui; Chi, Haitao; Le, Shengfeng; Wang, Wei; Liu, Weili

    2014-09-01

    A sensitive method was developed for the simultaneous determination of 11 bisphenols in plastic bottled drinking water by ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The samples were freeze-dried under vacuum and then dissolved with methanol. The separation was performed on a UPLC BEH C18 column (100 mm x 2.1 mm, 1.7 μm) by using 0.1% (v/v) NH3 · H2O and methanol as mobile phases with gradient elution at a flow rate of 0.2 mL/min. The electrospray ionization (ESI) source in negative ion mode was used for the analysis of the 11 bisphenols in the multiple reaction monitoring (MRM) mode. The results verified that the standard curves for the 11 bisphenols were obtained with good correlation coefficients (R2) > 0.997 in their concentration ranges. The limits of detection (LOD, S/N = 3) for the 11 bisphenols were in the range of 0.01-1.00 μg/L. The mean recoveries for the 11 bisphenols at three spiked levels (low, middle, high) were 75.3%-102.1% with the relative standard deviations of 1.5%-8.9%. Seven plastic bottled drinking water samples were tested, and no bisphenol was found. The method is accurate, simple, rapid and feasible for the simultaneous determination of bisphenols in plastic bottled drinking water.

  11. Chemical Recycling of Pop Bottles: The Synthesis of Dibenzyl Terephthalate from the Plastic Polyethylene Terephthalate

    Science.gov (United States)

    Donahue, Craig J.; Exline, Jennifer A.; Warner, Cynthia

    2003-01-01

    A laboratory procedure involving the chemical recycling of the plastic polyethylene terephthalate (PET or PETE) from 2-L pop bottles is described. A transesterification reaction is employed to depolymerize PET. At atmospheric pressure in refluxing benzyl alcohol in the presence of a catalyst, PET is converted to dibenzyl terephthalate in moderate yields. This procedure models an industrial process that involves the transesterification reaction of PET with methanol at high temperature and pressure, conditions not normally accessible in an undergraduate laboratory, to yield dimethyl terephthalate and ethylene glycol. A second method of preparing dibenzyl terephthalate starting with terephthaloyl chloride is also described. The diester from these two approaches is characterized using melting points, TLC, and IR and NMR spectroscopy. This experiment has been used in a general chemistry sequence that has sections on organic chemistry and polymer chemistry, but is also well suited for an introductory organic chemistry laboratory course or a polymer chemistry laboratory course. This lab experiment is part of a larger effort to develop a general chemistry sequence for engineering students using the theme of chemistry and the automobile. Student results are presented.

  12. Screening adulteration of polypropylene bottles with postconsumer recycled plastics for oral drug package by near-infrared spectroscopy.

    Science.gov (United States)

    Xie, Lan-Gui; Sun, Hui-Min; Jin, Shao-Hong

    2011-11-14

    Adulteration of pharmaceutical packaging containers with postconsumer recycled plastic materials was considerably difficult to identify due to the similar chemical compositions of virgin and recycled plastics. In the present study, near-infrared (NIR) spectroscopy coupled with conformity test was proposed to screen the adulteration of pharmaceutical packaging containers. Two kinds of representative screening models were investigated on polypropylene (PP) bottles for oral drug package. The reliability of the screening models was validated through studying the identification reliability, specificity, and robustness of the methods. The minimum spiking level of two modeled adulterants at the proportion of 20% could be detected, and the unqualified sample from a domestic manufacturer was rejected by this developed method. This strategy represents a rapid and promising analytical method for screening the adulteration of pharmaceutical plastic packaging containers with postconsumer recycled plastics.

  13. 塑料啤酒瓶的制造方案%Manufacturing Scheme of Plastic Beer Bottles

    Institute of Scientific and Technical Information of China (English)

    方圣行; 胡莹梅

    2001-01-01

    The status and prospect of the material and processing forplastic beer bottle at home and abroad are introduced.The new fruits as well as PACVD techniqne and nano-polymer to improve the barrier property are described.It will be a great foreground that the plastic beer bottle is domestically developed.%介绍了国内外制造塑料啤酒瓶的材料及其加工工艺的现状和发展前景,提出了用PACVD(等离子辅助化学气相沉积)技术与纳米聚合物提高啤酒瓶阻隔性的新成果,指出在国内发展塑料啤酒瓶包装的伟大前景。

  14. Field comparison of solar water disinfection (SODIS) efficacy between glass and polyethylene terephalate (PET) plastic bottles under sub-Saharan weather conditions.

    Science.gov (United States)

    Asiimwe, J K; Quilty, B; Muyanja, C K; McGuigan, K G

    2013-12-01

    Concerns about photodegradation products leaching from plastic bottle material into water during solar water disinfection (SODIS) are a major psychological barrier to increased uptake of SODIS. In this study, a comparison of SODIS efficacy using glass and plastic polyethylene terephalate (PET) bottles was carried out under strong real sunlight and overcast weather conditions at Makerere University in central Uganda. Both clear and turbid natural water samples from shallow wells and open dug wells, respectively, were used. Efficacy was determined from the inactivation of a wild strain of Escherichia coli in solar-exposed contaminated water in both glass and PET bottles. The studies reveal no significant difference in SODIS inactivation between glass and PET bottles (95% CI, p > 0.05), for all water samples under the different weather conditions except for clear water under overcast conditions where there was a small but significant difference (95% CI, p = 0.047) with less viable bacterial counts in PET bottles at two intermediate time points but not at the end of the exposure. The results demonstrate that SODIS efficacy in glass under tropical field conditions is comparable to PET plastic. SODIS users in these regions can choose either of reactors depending on availability and preference of the user.

  15. Research progress on squeeze casting in China

    Institute of Scientific and Technical Information of China (English)

    Li Yuanyuan; Zhang Weiwen; Zhao Haidong; You Dongdong; Zhang Datong; Shao Ming; Zhang Wen

    2014-01-01

    Squeeze casting is a technology with short route, high efficiency and precise forming, possessing features of casting and plastic processing. It is widely used to produce high performance metallic structural parts. As energy conservation and environmental protection concerns have risen, lightweight and high performance metal parts are urgently needed, which accelerated the development of squeeze casting technology over the past two decades in China. In this paper, research progress on squeeze casting aloys, typical parts manufacturing and development of squeeze casting equipment in China are introduced. The future trend and development priorities of squeeze casting are discussed.

  16. Development and application of a non-targeted extraction method for the analysis of migrating compounds from plastic baby bottles by GC-MS.

    Science.gov (United States)

    Onghena, Matthias; van Hoeck, Els; Vervliet, Philippe; Scippo, Marie Louise; Simon, Coraline; van Loco, Joris; Covaci, Adrian

    2014-01-01

    In 2011, the European Union prohibited the production of polycarbonate (PC) baby bottles due to the toxic effects of the PC monomer bisphenol-A. Therefore, baby bottles made of alternative materials, e.g. polypropylene (PP) or polyethersulphone (PES), are currently marketed. The principal aim of the study was the identification of major compounds migrating from baby bottles using a liquid-liquid extraction followed by GC/MS analysis. A 50% EtOH in water solution was selected as a simulant for milk. After sterilisation of the bottle, three migration experiments were performed during 2 h at 70°C. A non-targeted liquid-liquid extraction with ethyl acetate-n-hexane (1:1) was performed on the simulant samples. Identification of migrants from 24 baby bottles was done using commercially available WILEY and NIST mass spectra libraries. Differences in the migrating compounds and their intensities were observed between the different types of plastics, but also between the same polymer from a different producer. Differences in the migration patterns were perceived as well between the sterilisation and the migrations and within the different migrations. Silicone, Tritan™ and PP exhibited a wide variety of migrating compounds, whereas PES and polyamide (PA) showed a lower amount of migrants, though sometimes in relatively large concentrations (azacyclotridecan-2-one up to 250 µg kg⁻¹). Alkanes (especially in PP bottles), phthalates (dibutylphthalate in one PP bottle (±40 µg kg⁻¹) and one silicone bottle (±25 µg kg⁻¹); diisobutylphthalate in one PP (±10 µg kg⁻¹), silicone (up to ±80 µg kg⁻¹); and Tritan™ bottle (±30 µg kg⁻¹)), antioxidants (Irgafos 168, degradation products of Irganox 1010 and Irganox 1076), etc. were detected for PP, silicone and Tritan™ bottles. Although the concentrations were relatively low, some compounds not authorised by European Union Regulation No. 10/2011, such as 2,4-di-tert-butylphenol (10-100 µg kg⁻¹) or 2

  17. Novel spectrophotometric method for the determination of aluminum in soda drinks packed in cans and plastic bottles

    Energy Technology Data Exchange (ETDEWEB)

    Francisco, Barbara Bruna A.; Caldas, Luiz Fernando S.; Brum, Daniel M. [Departamento de Quimica Analitica, Universidade Federal Fluminense, Outeiro de Sao Joao Batista s/n, Centro, Niteroi/RJ 24020-141 (Brazil); Cassella, Ricardo J., E-mail: cassella@vm.uff.br [Departamento de Quimica Analitica, Universidade Federal Fluminense, Outeiro de Sao Joao Batista s/n, Centro, Niteroi/RJ 24020-141 (Brazil)

    2010-09-15

    In the present work, a new spectrophotometric method was developed for the determination of aluminum in soda drinks packed in different materials. Reaction among Al(III), phenylfluorone (PF) and cetylpyridinium chloride (CPC) in slightly alkaline medium was explored for this purpose. The method was optimized regarding to its chemical parameters in order to establish better conditions in terms of sensitivity and selectivity. The results obtained showed that the concentration of CPC presented remarkable influence on the sensitivity and acted as a sensitizer for the studied system. The possible interferences of some metallic cations were evaluated and the cations Cu(II), Mn(II), and Zn(II) presented noticed interference on the Al(III) signal. So, their interference was eliminated by using EDTA with minimum loss of sensitivity. The results obtained in the determination of total aluminum in soda drinks by the developed methodology were not statistically different from those obtained by electrothermal atomic absorption spectrometry. In the optimized conditions the method presented a linear range of 5-100 {mu}g L{sup -1}. The limits of detection and quantification were 0.81 and 2.7 {mu}g L{sup -1}, respectively. The methodology was successfully applied in the determination of aluminum in 10 samples of soda drinks packed in cans and plastic bottles.

  18. Research on the Squeezing and Plastic Deformed Model of Single Workplace and Multiple Force Point of Tube%管壳体单工多力点挤压塑变模型研究

    Institute of Scientific and Technical Information of China (English)

    李红军; 严龙; 闫久江; 陈伟; 李燕

    2014-01-01

    Under existing squeezing machine of the tube, the quality of clasp mark of the tube is unstable,the movable squee-zing plate is important components to ensure stability of clasp mark of the tube, if transforming the location of force of cylinder on the movable squeezing plate, different quality of clasp mark of the tube is got, using the diverse forcing way which is single workplace and multiple force point to structure the squeezing and plastic deformed model of the tube, and use the professional analysis software Inventor to carry out analysis of stress,displacement,deformation for the movable squeezing plate, and the squeezing and plastic deformed model of single workplace and multiple force point of tube is built, a big difference is made on improving the traditional squeezing way of tube, at the same time greatly improving stability of clasp mark of the tube.%在现有的管壳体挤压机中,管壳体卡痕质量不稳定,挤压活动板是管壳体挤压机中保证卡痕稳定性的重要构件,如果改变向上推力在挤压活动板上的作用点位置,可能获取不同的管壳体卡痕质量,笔者采用单工位多平均施力点的发散施力方式构建管壳体挤压塑变模型,并运用专业分析软件Inventor对挤压活动板进行内应力、位移、形变、管壳塑变等分析,建立了管壳体单工位多力点挤压塑变模型,对于改善传统管壳体挤压方式产生了较大的影响,同时极大的提高了管壳卡痕稳定性。

  19. Dispersive solid-phase extraction based on magnetic dummy molecularly imprinted microspheres for selective screening of phthalates in plastic bottled beverages.

    Science.gov (United States)

    Qiao, Jindong; Wang, Mingyu; Yan, Hongyuan; Yang, Gengliang

    2014-04-02

    A new magnetic dummy molecularly imprinted dispersive solid-phase extraction (MAG-MIM-dSPE) coupled with gas chromatography-FID was developed for selective determination of phthalates in plastic bottled beverages. The new magnetic dummy molecularly imprinted microspheres (MAG-MIM) using diisononyl phthalate as a template mimic were synthesized by coprecipitation coupled with aqueous suspension polymerization and were successfully applied as the adsorbents for MAG-MIM-dSPE to extract and isolate five phthalates from plastic bottled beverages. Validation experiments showed that the MAG-MIM-dSPE method had good linearity at 0.0040-0.40 μg/mL (0.9991-0.9998), good precision (3.1-6.9%), and high recovery (89.5-101.3%), and limits of detection were obtained in a range of 0.53-1.2 μg/L. The presented MAG-MIM-dSPE method combines the quick separation of magnetic particles, special selectivity of MIM, and high extraction efficiency of dSPE, which could potentially be applied to selective screening of phthalates in beverage products.

  20. Stability of Vancomycin 25 mg/mL in Ora-Sweet and Water in Unit-Dose Cups and Plastic Bottles at 4°C and 25°C.

    Science.gov (United States)

    Ensom, Mary H H; Decarie, Diane; Lakhani, Anisha

    2010-09-01

    Solutions of vancomycin for oral administration are not available commercially in Canada or the United States but are needed for patients who cannot swallow capsules. To evaluate the stability of vancomycin solutions stored in unit-dose cups and plastic bottles under refrigeration (4°C) and at room temperature (25°C) for up to 75 days. Vancomycin 25 mg/mL in Ora-Sweet vehicle and water (1:1 ratio by volume) was dispensed into opaque blue polyethylene unit-dose cups with aluminum seal (14 replicates) or amber plastic prescription bottles (6 replicates). Seven cups and 3 bottles were refrigerated (4°C), and the remainder of the containers were stored at room temperature (25°C). At the time of preparation and at 15, 30, 40, 50, 63, and 75 days, 3 aliquots were collected from one of the cups and from every bottle and were stored frozen (-85°C) until the time of analysis. Physical characteristics were evaluated at each time point, including measurement of pH and visual assessment of colour and precipitation. After thawing, the samples were analyzed in triplicate by a validated stability-indicating high-performance liquid chromatography method. A solution was considered stable if 90% of the initial concentration of vancomycin was maintained. No notable changes in colour, taste, or pH were observed in vancomycin solutions stored in the unit-dose cups at 4°C or 25°C or in the plastic bottles stored at 4°C over the 75-day study period. Starting on day 63, a white precipitate was observed in the solutions stored in plastic bottles at 25°C, but there were no notable changes in taste or pH during the 75-day period. The 95% confidence interval of the slope of the curve relating concentration to time, determined by linear regression, indicated that vancomycin solutions stored in cups or bottles at 4°C would maintain at least 93.6% of the initial vancomycin concentration for 75 days and that solutions stored at 25°C would maintain at least 90.0% of the initial

  1. Energy implications of bottled water

    Science.gov (United States)

    Gleick, P. H.; Cooley, H. S.

    2009-01-01

    As bottled water use continues to expand around the world, there is growing interest in the environmental, economical, and social implications of that use, including concerns about waste generation, proper use of groundwater, hydrologic effects on local surface and groundwater, economic costs, and more. A key concern is how much energy is required to produce and use bottled water. This paper estimates the energy footprint required for various phases of bottled water production, transportation, and use. We do not develop a single comprehensive life-cycle energy estimate because of differences among water sources, bottling processes, transportation costs, and other factors, but we quantify key energy inputs necessary for site-specific assessments. We also apply these inputs to three site-specific examples of the energy required from production to the point of use: local bottled water produced and used in Los Angeles, water bottled in the South Pacific and shipped by cargo ship to Los Angeles, and water bottled in France and shipped in various ways to Los Angeles. For water transported short distances, the energy requirements of bottled water are dominated by the energy used to produce the plastic bottles. Long-distance transport, however, can lead to energy costs comparable to, or even larger than, those of producing the bottle. All other energy costs—for processing, bottling, sealing, labeling, and refrigeration—are far smaller than those for the production of the bottle and transportation. These data can be used to generate specific estimates for different sources, treatments, and delivery options.

  2. MEASUREMENT OF PHTHALATE LEVELS IN HUMAN MILK: CONTRIBUTION FROM PLASTICS IN BREAST PUMPS, STORAGE BOTTLES AND BAGS

    Science.gov (United States)

    Phthalates are plasticizers used to impart flexibility in products widely used by the general population, including polyvinyl chloride, plastic toys, and medical devices. Some phthalates act as anti-androgens, and prenatal or perinatal exposure to phthalates in laboratory animals...

  3. An evaluation of the migration of antimony from polyethylene terephthalate (PET) plastic used for bottled drinking water

    Energy Technology Data Exchange (ETDEWEB)

    Chapa-Martínez, C.A.; Hinojosa-Reyes, L.; Hernández-Ramírez, A.; Ruiz-Ruiz, E.; Maya-Treviño, L.; Guzmán-Mar, J.L., E-mail: jorge.guzmanmr@uanl.edu.mx

    2016-09-15

    The leaching of antimony (Sb) from polyethylene terephthalate (PET) bottling material was assessed in twelve brands of bottled water purchased in Mexican supermarkets by atomic fluorescence spectrometry with a hydride generation system (HG-AFS). Dowex® 1X8-100 ion-exchange resin was used to preconcentrate trace amounts of Sb in water samples. Migration experiments from the PET bottle material were performed in water according to the following storage conditions: 1) temperature (25 and 75 °C), 2) pH (3 and 7) and 3) exposure time (5 and 15 days), using ultrapure water as a simulant for liquid foods. The test conditions were studied by a 2{sup 3} factorial experimental design. The Sb concentration measured in the PET packaging materials varied between 73.0 and 111.3 mg/kg. The Sb concentration (0.28–2.30 μg/L) in all of the PET bottled drinking water samples examined at the initial stage of the study was below the maximum contaminant level of 5 μg/L prescribed by European Union (EU) regulations. The parameters studied (pH, temperature, and storage time) significantly affected the release of Sb, with temperature having the highest positive significant effect within the studied experimental domain. The highest Sb concentration leached from PET containers was in water samples at pH 7 stored at 75 °C for a period of 5 days. The extent of Sb leaching from the PET ingredients for different brands of drinking water can differ by as much as one order of magnitude in experiments conducted under the worst-case conditions. The chronic daily intake (CDI) caused by the release of Sb in one brand exceeded the Environmental Protection Agency (USEPA) regulated CDI value of 400 ng/kg/day, with values of 514.3 and 566.2 ng/kg/day for adults and children. Thus, the appropriate selection of the polymer used for the production of PET bottles seems to ensure low Sb levels in water samples. - Highlights: • The PET safety due to the release of Sb was evaluated in Mexican water PET

  4. 储存条件对塑料瓶装大豆油中塑化剂含量影响的研究%Influence of storage condition on the contents of plasticizers in soybean oil packaged in plastic bottle

    Institute of Scientific and Technical Information of China (English)

    刘玉兰; 张明明; 朱远坤; 杨书平

    2015-01-01

    The fresh soybean oils were stored respectively in PET plastic bottle and PE plastic bottle, and the influences of storage temperature, storage time and light on the contents of plasticizers in the soybean oil were investigated. The results showed that the contents of DBP and DEHP in soybean oils packaged in PE plastic bottle were obviously higher than those in PET plastic bottle when the storage temperature was above 27℃ and storage time was 20 d. The contents of DPP in soybean oils had no change when the tem-perature didn’t exceed 50℃, while it rose significantly when the temperature was above 50℃. Further-more, when stored at 65℃ for 90 d, the contents of DPP in the soybean oils packaged in PET and PE plastic bottles were up to 1 559. 3 μg/kg and 2 756. 8 μg/kg, respectively. In addition, when stored at 65℃ for 50 d, DMP could be detected in soybean oil packaged in PE plastic bottle, and its contents were 43. 7(50 d),128. 7(70 d),114. 3 μg/kg(90 d). When stored at 50℃ for 90 d, the content of DBP in soybean oil packaged in PE plastic bottle reached 452. 0μg/kg, 1. 5 times as high as the national standard limit for DBP. Compared with the lucifuge storage, light had no influence on DPP and small im-pacts on DBP and DEHP for a short time. Under the same storage temperature and light condition, as storage time prolonging, the content of DBP in soybean oils packaged in PET and PE plastic bottles were on a rise, and the content of DEHP presented a fluctuation trend.%以新鲜大豆油为原料,将其分别盛装于PET材质塑料瓶和PE材质塑料瓶中,研究不同储存温度、储存时间以及光照对大豆油中邻苯二甲酸酯类塑化剂含量变化的影响。结果表明:储存20 d且储存温度高于27℃时PE瓶装大豆油中DBP和DEHP含量明显高于PET瓶装大豆油的;大豆油中DPP含量在储存温度不超过50℃时基本无变化,但储存温度高于50℃时,其含量明显增加。65℃储存90 d后,PET、PE瓶

  5. Adsorbability Study of Plastic Transfusion Bottle and Infusion Set to Diazepam%塑料输液瓶和输液器对地西泮的吸附性考察

    Institute of Scientific and Technical Information of China (English)

    夏清荣; 梁俊; 曹银

    2015-01-01

    OBJECTIVE:To study the adsorbability of plastic transfusion bottle and infusion set to diazepam. METHODS:With the reference of plastic-bottled 5% glucose injection,HPLC was used to determine the changes of mass concentration of diazepam adding into plastic-bottled 5% glucose injection at different time;disposable plastic infusion set was connected to simulate intrave-nous infusion and determine the changes of mass concentration of diazepam in the liquid effluent at different time. RESULTS:The mass concentration of diazepam in glass infusion bottles group was higher than in plastic transfusion bottles group. The adsorbabili-ties of solutions showed the strongest at the time of 15-20 min. The mass concentration of the effluent liquid from the glass bottle group was about 80% of the original concentration and plastic bottle group was about 67%. As the time went on,the adsorbability was gradually saturated at 60 min and the concentration rose again;the mass concentration of the effluent liquid from the glass bot-tle group returned to 95%of the original concentration at 80 min and the plastic bottle group was about 75%of the original concen-tration. CONCLUSIONS:Both plastic infusion bottle and infusion set have strong adsorbability to diazepam. It is suggested that the dosage of diazepam should be increased by 25% to 33% while plastic-bottled 5% glucose injection is used as solvent for intrave-nous drip.%目的:考察塑料输液瓶和输液器对地西泮的吸附性。方法:以玻璃瓶装的5%葡萄糖注射液为对照,采用高效液相色谱(HPLC)法测定地西泮加入塑料瓶装的5%葡萄糖注射液后放置不同时间的质量浓度变化;并连接一次性塑料输液器模拟静滴状态,于不同时间收集流出液体测定其中地西泮的质量浓度变化。结果:玻璃瓶组地西泮质量浓度高于塑料瓶组,两组溶液经过输液器15~20 min时吸附性最强,玻璃瓶组流出液体质

  6. An evaluation of the migration of antimony from polyethylene terephthalate (PET) plastic used for bottled drinking water.

    Science.gov (United States)

    Chapa-Martínez, C A; Hinojosa-Reyes, L; Hernández-Ramírez, A; Ruiz-Ruiz, E; Maya-Treviño, L; Guzmán-Mar, J L

    2016-09-15

    The leaching of antimony (Sb) from polyethylene terephthalate (PET) bottling material was assessed in twelve brands of bottled water purchased in Mexican supermarkets by atomic fluorescence spectrometry with a hydride generation system (HG-AFS). Dowex® 1X8-100 ion-exchange resin was used to preconcentrate trace amounts of Sb in water samples. Migration experiments from the PET bottle material were performed in water according to the following storage conditions: 1) temperature (25 and 75°C), 2) pH (3 and 7) and 3) exposure time (5 and 15days), using ultrapure water as a simulant for liquid foods. The test conditions were studied by a 2(3) factorial experimental design. The Sb concentration measured in the PET packaging materials varied between 73.0 and 111.3mg/kg. The Sb concentration (0.28-2.30μg/L) in all of the PET bottled drinking water samples examined at the initial stage of the study was below the maximum contaminant level of 5μg/L prescribed by European Union (EU) regulations. The parameters studied (pH, temperature, and storage time) significantly affected the release of Sb, with temperature having the highest positive significant effect within the studied experimental domain. The highest Sb concentration leached from PET containers was in water samples at pH7 stored at 75°C for a period of 5days. The extent of Sb leaching from the PET ingredients for different brands of drinking water can differ by as much as one order of magnitude in experiments conducted under the worst-case conditions. The chronic daily intake (CDI) caused by the release of Sb in one brand exceeded the Environmental Protection Agency (USEPA) regulated CDI value of 400ng/kg/day, with values of 514.3 and 566.2ng/kg/day for adults and children. Thus, the appropriate selection of the polymer used for the production of PET bottles seems to ensure low Sb levels in water samples.

  7. The Technical Study of Electromagnetic Forming Sealing for the Plastic Bottle%塑料瓶的电磁成形封口研究

    Institute of Scientific and Technical Information of China (English)

    邱春城; 李洪涛

    2000-01-01

    对塑料瓶的电磁成形封接工艺进行研究,通过对放电电压、电容、线圈位置等参数进行调节,得出了优化的封口工艺。试验结果表明:线圈位置,电压对封口效果影响较大。%This paper introduces the research of electromagnetic forming sealing for the plastic bottle. The sealing technology is opimized by adjusting discharge voltage,capacitance、 coil position. The experiments show that coil position and voltage have larger influence to the sealing effect.

  8. Electrochemical determination of bisphenol A in plastic bottled drinking water and canned beverages using a molecularly imprinted chitosan-graphene composite film modified electrode.

    Science.gov (United States)

    Deng, Peihong; Xu, Zhifeng; Kuang, Yunfei

    2014-08-15

    Herein, a novel electrochemical sensor based on an acetylene black paste electrode modified with molecularly imprinted chitosan-graphene composite film for sensitive and selective detection of bisphenol A (BPA) has been developed. Several important parameters controlling the performance of the sensor were investigated and optimised. The imprinted sensor offers a fast response and sensitive BPA quantification. Under the optimal conditions, a linear range from 8.0 nM to 1.0 μM and 1.0 to 20 μM for the detection of BPA was observed with the detection limit of 6.0 nM (S/N=3). Meanwhile, the fabricated sensor showed excellent specific recognition to template molecule among the structural similarities and coexistence substances. Furthermore, this imprinted electrochemical sensor was successfully employed to detect BPA in plastic bottled drinking water and canned beverages.

  9. Green Fiber Bottle

    DEFF Research Database (Denmark)

    Didone, Mattia; Tosello, Guido

    their impact on the environment, especially the oceans. For example, the life span of a plastic bottle in the ocean is 500 years, and during its degradation, the plastic is reduced to micro pieces, which causes the starvation of several marine animals. The new bottle is completely made from molded paper pulp...... technologies, the manufacturing technology for the production of the bottle has to offer the possibility of significant energy savings. Molded pulp products are made from wood fibers dispersed in water, and then they are formed, drained and dried. A relatively large quantity of resources (i.e. energy and time......) is consumed during the drying process. It is in this process stage that an innovative way of drying the products can be exploited by using the concept of impulse drying. Impulse drying is an advance drying technique in which water is removed from a wet paper pulp by the combination of mechanical pressure...

  10. Snuff Bottle

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Chinese snuff bottles are artistic curiosities enjoyed by connoisseurs and collectors alike. In the 17th century, artisans of the Chinese imperial court made several different kinds of snuff bottles with a superior aesthetic. Nowadays, China still

  11. USE OF SINGLE-MINUTE EXCHANGE OF DIE – SMED – AS A STRATEGY TO INCREASE PRODUCTIVITY IN A PLASTIC BOTTLE LABELER

    Directory of Open Access Journals (Sweden)

    Teonas Bartz

    2012-12-01

    Full Text Available The increase in the production and sale of food products stored in plastic containers, which serve different markets, caused the company researched departed in search of new concepts to increase the productivity of production equipment. With the increase of productivity, there is greater flexibility in planning and scheduling of production and exchange of tools. The implementation of the methodology of Single-Minute Exchange of Die – SMED reduces the setup time of equipment, maximizing the period of machine operation. With this the company more flexible production process and can reduce production batches, increasing operating rates, productivity and competitiveness of organizations. In this paper, we present the steps necessary for the implementation of the SMED in a labeling machine for plastic bottles. To this end, there were activities analysis, suggestions for improvements in machinery and procedures, timing of the steps before and after the improvements implemented and analyzes of the times obtained. After that, we obtained a significant reduction in setup time machine studied.

  12. Evaluating localism in the management of post-consumer plastic bottles in Honolulu, Hawai'i: perspectives from industrial ecology and political ecology.

    Science.gov (United States)

    Park, Joo Young; Gupta, Clare

    2015-05-01

    Localism or regionalization has become a popular topic in urban design, but recent critics raise the question of whether the local or regional scale is most desirable for industrial ecosystems. As a way to explore the claim that localized metabolism is more sustainable, this study examines the costs and benefits of two differentially scaled strategies for the management of post-consumer polyethylene terephthalate (PET) bottles originating in the city of Honolulu, Hawai'i: local incineration and trans-continental recycling. We first estimate total environmental impacts of two options using life cycle assessment, and then disaggregate them into local versus non-local impacts to examine the spatial distribution of costs and benefits. We further assess the environmental justification for localized waste management in relation to the broader socio-economic motivations that underlie the way that plastics are managed in Honolulu. In doing so we assess the scale at which waste management is optimized from an environmental standpoint as well as the non-environmental considerations such as security and safety that influence the politics of scale involved in urban metabolic design. By illustrating the trade-offs between a local versus global metabolic pathway for plastic waste, the results from our Honolulu case study are globally relevant for communities interested in sustainable urban design and in particular urban waste management.

  13. Squeezing Properties of the Generalized Multimode Squeezed States

    Institute of Scientific and Technical Information of China (English)

    SONGTong-Qiang

    2001-01-01

    By means of the invariance of Weyl ordering under similar transformations we derive the explicit form of the generalized multimode squeezed states.Moreover,the completeness relation and the squeezing properties of the generalized multimode squeezed states are discussed.

  14. Squeezing Properties of the Generalized Multimode Squeezed States

    Institute of Scientific and Technical Information of China (English)

    SONG Tong-Qiang

    2001-01-01

    By means of the invariance of Weyl ordering under similar transformations we derive the explicit form of the generalized multimode squeezed states. Moreover, the completeness relation and the squeezing properties of the generalized multimode squeezed states are discussed.

  15. Evaluation of a sticky trap (AedesTraP, made from disposable plastic bottles, as a monitoring tool for Aedes aegypti populations

    Directory of Open Access Journals (Sweden)

    de Santos Eloína Maria

    2012-09-01

    Full Text Available Abstract Background Dengue virus, which is transmitted by Aedes aegypti mosquitoes is the most important emerging viral disease, infecting more than 50 million people annually. Currently used sticky traps are useful tools for monitoring and control of A. aegypti, despite differences in efficiency, labor requirements and cost. In the present work, a field assay was carried out to evaluate the performance of a sticky trap (AedesTrap, produced using disposable material, in capturing gravid Aedes spp. females. Additionally, conditions necessary for the improved performance of the device, such as number of traps per site and location (indoors or outdoors were evaluated. Methods During a one year period, traps were placed in a dengue endemic area in 28 day cycles. The trap, named AedesTrap, consisted of a disposable plastic soda bottle coated inside with colophony resin, which served as a sticky substrate. Disposable bottles were donated by restaurants, and traps were made by laboratory staff, reducing the cost of the sticky trap (less than U$3. Mosquito capture in indoor and outdoor areas was compared by placing the traps in laundry room, kitchen or bedroom (indoors and front or back yard (outdoors. The relationship between the number of AedesTraps and quantity of captured mosquitoes was investigated by utilizing one or three traps/site. Results During a 28 day cycle, a single AedesTrap was capable of capturing up to 15 A. aegypti in a house, with a mean capture of 0.5 to 2.63 females per premise. The AedesTrap collected three times more outdoors versus indoors. Similarly, the capability of detecting Aedes spp. infestation, and of capturing females, was three times higher when using three AedesTraps per house, compared with one trap per house. Conclusions AedesTrap was shown to be capable of capturing A. aegypti and other culicidae, providing information on the adult mosquito population, and allowing the identification of areas critically

  16. BOOK REVIEW: Quantum Squeezing

    Science.gov (United States)

    Zubairy, Suhail

    2005-05-01

    Quantum squeezed states are a consequence of uncertainty relations; a state is squeezed when the noise in one variable is reduced below the symmetric limit at the expense of the increased noise in the conjugate variable such that the Heisenberg uncertainty relation is not violated. Such states have been known since the earliest days of quantum mechanics. The realization in the early 80's that quantum squeezed states of the radiation field can have important applications in high precision Michelson interferometry for detecting gravitational waves led to a tremendous amount of activity, both in theoretical and experimental quantum optics. The present volume, edited by two eminent scientists, is a collection of papers by leading experts in the field of squeezed states on different aspects of the field as it stands today. The book is divided into three parts. In the first part, there are three articles that review the fundamentals. The first paper by Knight and Buzek presents an introductory account of squeezed states and their properties. The chapter, which opens with the quantization of the radiation field, goes on to discuss the quantum optical properties of single mode and multimode squeezed states. The second article by Hillery provides a detailed description of field quantization in the presence of a nonlinear dielectric medium, thus providing a rigorous treatment of squeezing in nonlinear media. The third article by Yurke presents a comprehensive discussion of the input-output theory of the squeezed radiation at the dielectric boundaries. The second part of the book, comprising of three articles, deals with the generation of squeezed states. In the first article, Drummond reviews the squeezing properties of light in nonlinear systems such as parametric oscillators. He also discusses squeezed light propagation through waveguides and optical fibers. In the second article, Ralph concentrates on active laser sources of squeezing and presents an analysis based on the

  17. New squeezed landau states

    Science.gov (United States)

    Aragone, C.

    1993-01-01

    We introduce a new set of squeezed states through the coupled two-mode squeezed operator. It is shown that their behavior is simpler than the correlated coherent states introduced by Dodonov, Kurmyshev, and Man'ko in order to quantum mechanically describe the Landau system, i.e., a planar charged particle in a uniform magnetic field. We compare results for both sets of squeezed states.

  18. Influence of storage temperature and time on the physicochemical and bioactive properties of roselle-fruit juice blends in plastic bottle.

    Science.gov (United States)

    Mgaya-Kilima, Beatrice; Remberg, Siv Fagertun; Chove, Bernard Elias; Wicklund, Trude

    2014-03-01

    Roselle-fruit juice blends were made from roselle extract and mango, papaya, and guava juices at the ratio of 80:20, 60:40, 40:60, and 20:80, % roselle: fruit juice, respectively. The blends were pasteurized at 82.5°C for 20 min and stored in 100 mL plastic bottles at 28 and 4°C for 6 months. The effects of storage time and temperature on physicochemical and bioactive properties were evaluated. Total soluble solids, pH, and reducing sugars increased significantly (P fruit blends (40% roselle) decreased significantly (P fruit blends (40% roselle) decreased from 58-55% to 43-42% when stored at 28 and 4°C, respectively. TMA losses were 86-65% at 28°C and 75-53% at 4°C while TPC losses were 66-58% at 28°C and 51-22% at 4°C. Loss of antioxidant capacity (FRAP) was 18-46% at 28°C and 17-35% at 4°C. A principal component analysis (PCA) differentiated roselle-juice fruit blends into two clusters with two principle components PC1 and PC2, which explained 97 and 3% (blends stored at ambient temperature) and 96 and 4% (blends stored at refrigerated temperature) of the variation, respectively. PC1 differentiated roselle-guava juice blends which were characterized by vitamin C, TPC, FRAP, and pH, while PC2 from another cluster of roselle-mango and roselle-papaya juice blends and was characterized by TSS, RS, and color parameters (L* a* b*). However, TMA was the main variable with the highest effect on all roselle-fruit juice blends regardless of the storage time and temperature.

  19. Analysis of Phthalic Acid Esters in Plastic Bottled Beverages%塑料瓶装饮料中邻苯二甲酸醋的含量分析

    Institute of Scientific and Technical Information of China (English)

    李荔群; 陈蓉芳; 高强; 厉曙光

    2011-01-01

    [ Objective ] To determine the concentrations of di-ethyl phthalate (DEP), di-n-butyl phthalate (DBP) and di(2-ethylhexyl) phthalate (DEHP) in beverages bottled in plastic containers and to analyze the effect of some factors on the concentration of phthalates. [ Methods ] Forty-nine different brands of beverage were selected from the market and gas chromatography was applied to determine the level of phthalates in the beverage. The differences between three sorts of beverages (tea, juice, and dairy drinks) were tested by ANOVA and the effects of storage time and pH value on the concentration of phthalates in beverage were analyzed using Linear Regression Model. [ Results ] DEP wasn't found while the detection rates of DBP and DEHP in samples were 98.0% and 100% respectively with the average concentrations of 0.038 mg/L and 0.071 mg/L respectively. The detection range of DBP and DEHP in tea drinks were 0-0.047 mg/L and 0.045-0.146 mg/L respectively. The highest detection level of DBP in juice drinks was 0.127mg/L, and DEHP was found in the range from 0.060mg/L to 0.371 mg/L. The maximum concentrations of DBP and DEHP in dairy drinks were 0.081 mg/L and 0.089 mg/L respectively, and the minimum concentrations were 0.032 mg/L and 0.033 mg/L respectively. The levels of DBP in juice and dairy drinks were significantly higher than those in tea drinks (p=0.003 and P=0.002). The levels of DEHP in juice drinks were higher than those in tea and dairy drinks (P=0.00l and P=0.002). The fixed multivariate linear model showed that, the logarithms of DBP concentrations of juice and dairy drinks were 0.36 and 0.50 units higher than that of tea drinks, the logarithm of DEHP concentration of juice drinks was 0.47 units higher than that of tea drinks, and the logarithm of DEHP concentration of acid drinks was 0.30 units higher than that of weak acid drinks.[ Conclusion ] It can be concluded that the detection rates of DBP and DEHP in plastic bottled beverages were fairly high and

  20. Bottled Water and Fluoride

    Science.gov (United States)

    ... bottled water and fluoride. Does bottled water contain fluoride? Bottled water products may contain fluoride, depending on ... How can I find out the level of fluoride in bottled water? The FDA does not require ...

  1. 塑料瓶中双酚A的电化学测定方法研究%Study on Electrochemical Determination of Biphenonl A in Plastic Bottle

    Institute of Scientific and Technical Information of China (English)

    余辉; 何凤云; 卞育蓉

    2012-01-01

    The electrochemical behavior of bisphenol A(BPA) at a carbon paste electrode(CPE) modified with a multi-wall carbon nanotubes(MWCNTs) film was studied with cyclic voltammetry(CV). Results showed that the MWCNTs-CPE had a strong electrocatalytic effect on BPA. In phospate buffer solution(PBS) of pH 7.0, BPA exhibited a significant oxidation peak at 0.504 V. Based on this, a sensitive electrochemical method was developed for the determination of BPA in plastic bottle. The experimental parameters, such as the pH of the supporting electrolyte, scan rate and accumulation time were optimized. The defferential pulse current of BPA was linear with its concentration in the range of 5.0 × 10-7-2.0 × 10-5 mol / L ( r=0.995 45 ). The detection limit was 1.0 × 10-7 mol/L at the signal-to-noise of 3. The established methods was applied to determine bisphenol A in plastic cup sample with recovery of 104.4%, and the RSD was 3.9%(n=6).%制备了多壁碳纳米管修饰碳糊电极( MWCNTs/CPE),用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了环境激素双酚A在多壁碳纳米管修饰电极上的电化学行为.结果表明,多壁碳纳米管修饰碳糊电极对双酚A有明显的电催化作用,在pH 7.0的磷酸盐缓冲溶液(PBS)中,双酚A在0.504 V处有1个明显的氧化峰.实验考察了底液的pH值、扫描速度、富集时间等因素的影响.在优化的条件下,双酚A的示差脉冲峰电流与其浓度在5.0×10-7~2.0×10-5范围内呈良好的线性关系(r=0.995 45),检出限为1.0×10-7 mol/L(S/N=3).该法用于实际样品中双酚A含量的测定,回收率为104.4%,测定结果的相对标准偏差为3.9%(n=6).

  2. 聚丙烯塑料输液瓶拉环盖内面无菌可靠性调查%The asepsis security of the interior covers of polypropylene plastic dropping bottle

    Institute of Scientific and Technical Information of China (English)

    徐雪芬

    2008-01-01

    目的 探讨聚丙烯甥料输液瓶拉环盖内面的无菌可靠性.方法 将聚丙烯塑料输液瓶随机分为2组:对照组42瓶用生理盐水棉签直接采集开启后的聚丙烯塑料输液瓶拉环盖内面样本,实验组42瓶分别用0.5%碘伏、75%乙醇棉签常规消毒开启后的聚丙烯甥料输液瓶拉环盖内面,待干燥后用生理盐水棉签采集样本.所取样本均由主管检验师接种于无菌普通琼脂营养平板.置于37℃恒温培养箱内培养,以观察细菌生长情况.结果 2组细菌生长差异有统计学意义,X2=46.791,P<0.01.结论 聚丙烯塑料输液瓶拉环盖内面必须严格执行常规消毒后方能应用于临床.%Objective To study the asepsis security of the interior cover of polypropylene plastic dropping bottle.Methods The whole samples were divided randomly into two groups,each group included 42 polypropylene plastic dropping bottles,Samples of the control group were collected from the interior covers of dropping bottles wiping with sterile normal saline cotton swabs.Samples of the experimental group were also collected from the interior covers wiping with sterile normal saline cotton swabs aher disinfected by 0.5%iodophors and 75%alcohol respectively.All samples were inoculated on the aseptic plain agar nutrition flat plate.then incubated in 37℃ incubaton to observe the growth of bacteria.Results There Was statistical significance between the two groups in the growth of bacteria,χ2=46.791,P<0.01.Conclusions The interior covers of polypropylene plastic dropping bottle should be disinfected strictly before they are used in clinic.

  3. Bottled Water Mania: Americas Misguided Infatuation with Bottled Water over Tap Water

    Science.gov (United States)

    2010-05-01

    to remove pathogens. There are no requirements for filtration of bottled water. Tap water must be tested for cryptosporidium, giardia, and viruses ...Plastic bottles in landfills can take hundreds of years to decompose, causing a profound environmental impact. The oceans are another victim of

  4. Performance of funnel-shaped plastic bottle for water saving cultivation in extreme arid region%极端干旱区漏斗状塑料瓶的节水栽培性能

    Institute of Scientific and Technical Information of China (English)

    曹林涛; 高斌; 王前道; 曹亦斌

    2012-01-01

    为解决缺水高渗透地区新栽植物难以存活问题,该文通过室内实验与现场试验研究了塑料瓶的节水栽培性能.室内模拟不同的水分散失条件,连续多U定时测试塑料瓶内砂土的含水量,回归分析剩余含水量随时问的变化函数.结果表明:温度越高,水分散失速度越大;由饱和含水量至萎蔫含水量,在室温(22±1)℃下可以间隔9d浇水1次;漏斗状比直筒状瓶有利于延迟水分渗透;砂粒与有机肥比黏粒有利于锁住水分,可用以调节水分散失速度.现场栽植试验(有瓶与无瓶)比较亦证实该方法的有效性.由于漏斗状塑料瓶具有留存水流与延迟渗透的节水功效,有利于缺水或高渗透地区草、灌木植物的栽培.%In order to resolve the plants survival difficulty in high permeability or water-shortage area, the water-saving cultivation by funnel-shaped plastic bottle was studied through laboratory and field tests. Different water losing conditions were simulated in the laboratory to continuously test water content of sandy soil in the plastic bottle every day. Then, the regressive function was built to describe the relationship between remaining water content in sandy soil and time. Testing Results showed that the higher the environment temperature was, the greater the rate of water loss. From the saturated water content to the wilting water content, an interval of watering could be 9 days at room temperature((22±l)°C).The funnel-shaped bottles could delay water loss compared to straight cylinder-shaped bottles. Sand particles combined with organic fertilizers were more facilitated to conserve water than clay soil, and they could be used to adjust the rate of water loss. Field planting tests (with bottles and without bottles) confirmed its water-saving effectiveness. Due to high efficiency of water accumulation and saving, funnel-shaped bottles can benefit plants cultivation in high permeability or water-shortage area.

  5. Snuff bottles

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Snuff bottles first appeared in China in the Ming dynasty(1368-1644) and, as their name suggests, were originally indeed used as a container for snuff tobacco, first of all by the Manchu, Mongols and Tibetans. The reason for their popularity at that time is to be found in the customs of those ethnic minorities: because those ethnic groups mainly led a nomadic life that entailed frequent use of hay or firewood.

  6. Stopping the Bottle

    Science.gov (United States)

    ... more difficult it can be to break the bottle habit. Longer bottle use may lead to cavities or ... is coming later. The next week, eliminate another bottle feeding and provide milk in a cup instead. Try ...

  7. New alternatives in construction: earth filled pet bottles

    OpenAIRE

    Ruiz Valencia, Daniel; Pontificia Universidad Javeriana; López Pérez, Cecilia;; Cortes, Eliana; Pontificia Universidad Javeriana; Froese, Andreas; Pontificia Universidad Javeriana

    2014-01-01

    ABSTRACTTwo of the main problems of mankind are the lack of housing and the accumulation of solid waste and garbage thatultimately brings environmental problems. Within this solid waste are plastics such as the PET bottles (for examplesoda bottles). In order to try to solve both problems, since 2001 Eco-Tec Soluciones has pioneered in the constructionof houses and water storage structures with PET bottles filled with rammed earth. Groups GRIME and Estructuras yConstrucción of the Pontificia U...

  8. A Plastic Menagerie

    Science.gov (United States)

    Hadley, Mary Jane

    2010-01-01

    Bobble heads had become quite popular, depicting all sorts of sports figures, animals, and even presidents. In this article, the author describes how her fourth graders made bobble head sculptures out of empty plastic drink bottles. (Contains 1 online resource.)

  9. Spin squeezing and quantum correlations

    Indian Academy of Sciences (India)

    K S Mallesh; Swarnamala Sirsi; Mahmoud A A Sbaih; P N Deepak; G Ramachandran

    2002-08-01

    We discuss the notion of spin squeezing considering two mutually exclusive classes of spin- states, namely, oriented and non-oriented states. Our analysis shows that the oriented states are not squeezed while non-oriented states exhibit squeezing. We also present a new scheme for construction of spin- states using 2 spinors oriented along different axes. Taking the case of = 1, we show that the `non-oriented’ nature and hence squeezing arise from the intrinsic quantum correlations that exist among the spinors in the coupled state.

  10. Pulsed squeezed light: simultaneous squeezing of multiple modes

    CERN Document Server

    Wasilewski, W; Banaszek, K; Radzewicz, C; Wasilewski, Wojciech; Banaszek, Konrad; Radzewicz, Czeslaw

    2005-01-01

    We analyze the spectral properties of squeezed light produced by means of pulsed, single-pass degenerate parametric down-conversion. The multimode output of this process can be decomposed into characteristic modes undergoing independent squeezing evolution akin to the Schmidt decomposition of the biphoton spectrum. The main features of this decomposition can be understood using a simple analytical model developed in the perturbative regime. In the strong pumping regime, for which the perturbative approach is not valid, we present a numerical analysis, specializing to the case of one-dimensional propagation in a beta-barium borate waveguide. Characterization of the squeezing modes provides us with an insight necessary for optimizing homodyne detection of squeezing. For a weak parametric process, efficient squeezing is found in a broad range of local oscillator modes, whereas the intense generation regime places much more stringent conditions on the local oscillator. We point out that without meeting these cond...

  11. High-rate squeezing process of bulk metallic glasses

    Science.gov (United States)

    Fan, Jitang

    2017-03-01

    High-rate squeezing process of bulk metallic glasses from a cylinder into an intact sheet achieved by impact loading is investigated. Such a large deformation is caused by plastic flow, accompanied with geometrical confinement, shear banding/slipping, thermo softening, melting and joining. Temperature rise during the high-rate squeezing process makes a main effect. The inherent mechanisms are illustrated. Like high-pressure torsion (HPT), equal channel angular pressing (ECAP) and surface mechanical attrition treatments (SMAT) for refining grain of metals, High-Rate Squeezing (HRS), as a multiple-functions technique, not only creates a new road of processing metallic glasses and other metallic alloys for developing advanced materials, but also directs a novel technology of processing, grain refining, coating, welding and so on for treating materials.

  12. Correlation measurement of squeezed light

    DEFF Research Database (Denmark)

    Krivitsky, Leonid; Andersen, Ulrik Lund; Dong, R.;

    2009-01-01

    We study the implementation of a correlation measurement technique for the characterization of squeezed light which is nearly free of electronic noise. With two different sources of squeezed light, we show that the sign of the covariance coefficient, revealed from the time-resolved correlation data...

  13. Plastic fish

    CERN Multimedia

    Antonella Del Rosso

    2015-01-01

    In terms of weight, the plastic pollution in the world’s oceans is estimated to be around 300,000 tonnes. This plastic comes from both land-based and ocean-based sources. A lecture at CERN by chemist Wolfgang Trettnak addressed this issue and highlighted the role of art in raising people’s awareness.   Artwork by Wolfgang Trettnak. Packaging materials, consumer goods (shoes, kids’ toys, etc.), leftovers from fishing and aquaculture activities… our oceans and beaches are full of plastic litter. Most of the debris from beaches is plastic bottles. “PET bottles have high durability and stability,” explains Wolfgang Trettnak, a chemist by education and artist from Austria, who gave a lecture on this topic organised by the Staff Association at CERN on 26 May. “PET degrades very slowly and the estimated lifetime of a bottle is 450 years.” In addition to the beach litter accumulated from human use, rivers bring several ki...

  14. Stopping the Bottle

    Science.gov (United States)

    ... is coming later. The next week, eliminate another bottle feeding and provide milk in a cup instead. Try to do this when your baby is sitting at the table in a high chair. Generally, the last bottle to stop should be the nighttime bottle. That ...

  15. Squeezed light in semiconductors

    CERN Document Server

    Ward, M B

    2001-01-01

    Experimental evidence is presented for the generation of photon-number squeezed states of light as a result of multi-photon absorption. Photon-number squeezing as a result of non-linear absorption has long been predicted and results have been obtained utilising two very different material systems: (i) an AIGaAs waveguide in which high optical intensities can be maintained over a relatively long interaction length of 2 mm; (ii) the organic polymer p-toluene sulphonate polydiacetylene that is essentially a one-dimensional semiconductor possessing a highly nonlinear optical susceptibility. The resulting nonlinear absorption is shown to leave the transmitted light in a state that is clearly nonclassical, exhibiting photon-number fluctuations below the shot-noise limit. Tuning the laser wavelength across the half-bandgap energy has enabled a comparison between two- and three-photon processes in the semiconductor waveguide. The correlations created between different spectral components of a pulsed beam of light as ...

  16. Characterization of aqueous alcohol solutions in bottles with THz reflection spectroscopy

    DEFF Research Database (Denmark)

    Jepsen, Peter Uhd; Jensen, Jens K.; Møller, Uffe

    2008-01-01

    be classified as either harmless or inflammable. The method operates in reflection mode with the result that liquids opaque to THz radiation can be characterized with little influence of the bottle shape. The method works with plastic bottles as well as glass bottles, with absorption of THz radiation...... by the plastic or the glass being the limiting factor. The reflection mode allows for automatic control of the validity of the measurement. The method will be useful in liquid scanning systems at security checkpoints....

  17. Non-invasive determination of ethanol, propylene glycol and water in a multi-component pharmaceutical oral liquid by direct measurement through amber plastic bottles using Fourier transform near-infrared spectroscopy.

    Science.gov (United States)

    Broad, N W; Jee, R D; Moffat, A C; Eaves, M J; Mann, W C; Dziki, W

    2000-11-01

    Fourier transform near-infrared (FT-NIR) spectroscopy was used to quantify rapidly the ethanol (34-49% v/v), propylene glycol (20-35% v/v) and water (11-20% m/m) contents within a multi-component pharmaceutical oral liquid by measurement directly through the amber plastic bottle packaging. Spectra were collected in the range 7302-12,000 cm-1 and calibration models set-up using partial least-squares regression (PLSR) and multiple linear regression. Reference values for the three components were measured using capillary gas chromatography (ethanol and propylene glycol) and Karl Fischer (water) assay procedures. The calibration and test sets consisted of production as well as laboratory batches that were made to extend the concentration ranges beyond the natural production variation. The PLSR models developed gave standard errors of prediction (SEP) of 1.1% v/v for ethanol, 0.9% v/v for propylene glycol and 0.3% m/m for water. For each component the calibration model was validated in terms of: linearity, repeatability, intermediate precision and robustness. All the methods produced statistically favourable outcomes. Ten production batches independent of the calibration and test sets were also challenged against the PLSR models, giving SEP values of 1.3% v/v (ethanol), 1.0% v/v (propylene glycol) and 0.2% m/m (water). NIR transmission spectroscopy allowed all three liquid constituents to be non-invasively measured in under 1 min.

  18. The Dynamic Density Bottle: A Make-and-Take, Guided Inquiry Activity on Density

    Science.gov (United States)

    Kuntzleman, Thomas S.

    2015-01-01

    An activity is described wherein students observe dynamic floating and sinking behavior of plastic pieces in various liquids. The liquids and solids are all contained within a plastic bottle; the entire assembly is called a "density bottle". After completing a series of experiments that guides students to think about the relative…

  19. The Dynamic Density Bottle: A Make-and-Take, Guided Inquiry Activity on Density

    Science.gov (United States)

    Kuntzleman, Thomas S.

    2015-01-01

    An activity is described wherein students observe dynamic floating and sinking behavior of plastic pieces in various liquids. The liquids and solids are all contained within a plastic bottle; the entire assembly is called a "density bottle". After completing a series of experiments that guides students to think about the relative…

  20. Temperature and Thermal Stress Distribution for Metal Mold in Squeeze Casting Process

    Institute of Scientific and Technical Information of China (English)

    K.H.Chang; G.C.Jang; C.H.Lee; S.H.Lee

    2008-01-01

    In the squeeze casting process, loaded high pressure (over approximately 100 MPa) and high temperature influence the thermo-mechanical behavior and performance of the used metal mold. Therefore, to safely maintain the metal molds, the thermo-mechanical characteristics (temperature and thermal stress) of metal mold in the squeeze casting must be investigated. In this paper, temperature and thermal stress distribution of steel mold in squeeze casting process were investigated by using a three-dimensional non-steady heat conduction analysis and a three-dimensional thermal elastic-plastic analysis considering temperature-dependent thermo- physical and mechanical properties of the steel mold.

  1. Quantum cryptography with squeezed states

    CERN Document Server

    Hillery, M

    1999-01-01

    A quantum key distribution scheme based on the use of displaced squeezed vacuum states is presented. The states are squeezed in one of two field quadrature components, and the value of the squeezed component is used to encode a character from an alphabet. The uncertainty relation between quadrature components prevents an eavesdropper from determining both with enough precision to determine the character being sent. Losses degrade the performance of this scheme, but it is possible to use phase-sensitive amplifiers to boost the signal and partially compensate for their effect.

  2. Health beliefs about bottled water: a qualitative study

    Directory of Open Access Journals (Sweden)

    Wernham Aaron GH

    2009-06-01

    Full Text Available Abstract Background There has been a consistent rise in bottled water consumption over the last decade. Little is known about the health beliefs held by the general public about bottled water as this issue is not addressed by the existing quantitative literature. The purpose of this study was to improve understanding of the public's health beliefs concerning bottled mineral water, and the extent to which these beliefs and other views they hold, influence drinking habits. Methods A qualitative study using semi-structured interviews, with 23 users of the Munrow Sports Centre on the University of Birmingham campus. Results Health beliefs about bottled water could be classified as general or specific beliefs. Most participants believed that bottled water conferred general health benefits but were unsure as to the nature of these. In terms of specific health beliefs, the idea that the minerals in bottled water conferred a health benefit was the most commonly cited. There were concerns over links between the plastic bottle itself and cancer. Participants believed that bottled water has a detrimental effect on the environment. Convenience, cost and taste were influential factors when making decisions as to whether to buy bottled water; health beliefs were unimportant motivating factors. Conclusion The majority of participants believed that bottled water has some health benefits. However, these beliefs played a minor role in determining bottled water consumption and are unlikely to be helpful in explaining recent trends in bottled water consumption if generalised to the UK population. The health beliefs elicited were supported by scientific evidence to varying extents. Most participants did not feel that bottled water conferred significant, if any, health benefits over tap water.

  3. Soft particles feel the squeeze

    NARCIS (Netherlands)

    Frenkel, D.

    2009-01-01

    It's hard to fit in when you're different — especially if you're a large particle trying to squeeze into an array of smaller ones. But some soft, polymeric particles simply shrink to fit the space available.

  4. Processamento e avaliação de estabilidade de bebida isotônica em garrafa plástica Processing and stability evaluation of isotonic drink in plastic bottle

    Directory of Open Access Journals (Sweden)

    Rodrigo Rodrigues Petrus

    2005-09-01

    Full Text Available Processou-se uma mistura isotônica com pH 3,4; objetivando-se a produção de uma bebida microbiologicamente estável, prescindindo de refrigeração. A bebida isotônica foi pasteurizada a 85°C/5s em trocador de calor a placas e acondicionada em garrafas de polietileno tereftalato (PET sanificadas por aspersão com solução de ácido peracético 0,3% durante 5s, a 30°C. Foram processados 1 lote com 50mg/L de sorbato de potássio, 1 lote com 100mg/L e 1 lote sem sorbato. Os 3 lotes foram mantidos a 25°C durante 26 semanas, sendo realizadas determinações de pH, sólidos solúveis, acidez total titulável, ácido ascórbico, testes de aceitação sensorial e contagens de microrganismos mesófilos aeróbios totais, bolores e leveduras durante a estocagem. Verificou-se diferença significativa (pThe objective of this work was to obtain an isotonic drink by using pasteurization and packing into aseptic bottles, stable at room temperature, without the addition of chemical preservatives. For the sanitation of the plastic bottles some sanitizers were tested, based on their efficiency to destroy microorganism, maintaining minimum residual hydrogen peroxide, and keeping the drink sensory quality. The isotonic drink (pH 3,40 was thermaly processed in a plate pasteurizer at 85ºC/5s and packed into PET bottles sanitized by spraying peracetic acid at 0.3%/5s at 30ºC. The processed drink contained three different concentrations of potassium sorbate (control, 50 and 100mg/L. The stability of the products were evaluated at 25ºC for 26 weeks by measuring the pH, soluble solids, titrable acidity, ascorbic acid, microbial count, and sensory tests. The sensory evaluation and the count of the total mesophilic aerobic bacteria, moulds and yeast were measured during storage. There was no difference (p<0,05 for the pH, soluble solids and acidity of the processed drinks during the storage period except for the ascorbic acid which reduced to about 30% of the

  5. Plastic compression technology and mold design of HDPE closures for beverage bottles%低磨损HDPE饮料瓶盖压塑成型模具设计

    Institute of Scientific and Technical Information of China (English)

    罗达; 梁文杰

    2013-01-01

    针对传统饮料瓶盖压塑成型模具中存在的内衬套与螺纹型芯采用滑动摩擦结构,摩擦表面容易拉毛、卡死,模具容易磨损等问题,将磨损小、运动阻力小的滚动摩擦技术应用到压塑成型模具中,开展了能否在内衬套与螺纹型芯之间加入一个滚动部件代替原来滑动摩擦的分析,建立了滑动摩擦、滚动摩擦与磨损速度之间的关系,提出了在内衬套与螺纹型芯之间加入一个钢球保持圈,将原来的滑动摩擦改为滚动摩擦的方法,以达到减少磨损、提高模具寿命的目的.在提高模具寿命、瓶盖质量上,对模具的结构、制造技术、经济效益等方面进行了评价.开展了新结构压塑成型模具的设计、制造工作,并在原制盖机上进行了长期试验.研究结果表明,该模具磨损非常小,瓶盖质量比以前更好;且与传统的压塑成型模具相比寿命可提高1倍以上.%Aiming that the sliding friction structure in the inner lining sleeve and the screw thread core of the traditional beverage bottle cap pressing forming mould caused the friction surfaces to nap,blocking,easy wear etc., the rolling friction technology with wear small, small movement resistance was applied to the compression molding mould. Whether a rolling member was inserted between the inner bushing and the screw thread core in place of the original sliding friction was discussed.The relationship between the sliding friction, rolling friction and the wear speed was established, a ball retainer ring was added between the inner bushing and the screw thread core. The original sliding friction was changed into the rolling friction, thereby reducing wear and improving the life of the mould. The mould structure, manufacturing technology, economic benefits etc. were evaluated on the mould life and the cap quality. New structure of compression molding mold was designed and manufactured, and the long term test was developed on the original

  6. The LHC, de-squeezed

    CERN Multimedia

    CERN Bulletin

    2012-01-01

    Rare processes like the Higgs production require maximizing the number of proton collisions. This is done by squeezing the beams to very small sizes. However, interesting physics processes also happen when beams are not squeezed at interaction points. Last week, a dedicated run showed that the LHC is a record-breaking machine also with de-squeezed beams.   This figure shows an online hit map of one of the ATLAS/ALFA detectors. The narrow elliptical shape is the typical signal produced by elastically scattered protons. The removal of the background (central bulge) is a challenge for both experiments. The beam squeezing parameter is known by experts as beta-star (ß*): the smaller the ß*, the stronger the squeezing. To obtain as many collisions as possible in the heart of the experiments, the ß* at full energy is 0.60 m – that is, beams are squeezed to very small beam sizes. This maximizes the rate of proton collisions as required for rare process...

  7. Bottle characteristics of topical international glaucoma medications versus local brands in Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Nasser Al-Jumaian

    2016-01-01

    Full Text Available What Is Known and Objective: Physical bottle characteristics differ of brand name topical glaucoma medications and local generic equivalents. This study compares the bottle characteristics of international topical glaucoma brands versus local brands from the Kingdom of Saudi Arabia. Methods: Data were collected on bottle drum volume, drop volume, bottle "squeezability," bottle tip diameter, labels and instructions, cap color coding, and clarity of the drug label. Density-based calculations of drops in bottle volume were assessed using an analytic balance. Bottle tip diameter was measured using 0.05 mm Vernier calipers. A Likert scale-based questionnaire was used to evaluate the subjective opinions of patients on bottle squeezability, clarity of usage and storage instructions, and the consistency of the cap color coding. Results: The volumes of international brands were statistically significantly higher than the local brands (P < 0.001. A number of drops per bottle and tip diameter were comparable between the international local brands. Cap color coding was inconsistent for international and local brands. Patients were dissatisfied with the label font size. Patients reported that the international and local brands were similar in terms of the ease of opening the bottle, instilling a drop, and the clarity of the instructions; but the local brands were subjectively easier to squeeze than international brands. What Is New and Conclusions: This is the first study to compare bottle characteristics of local Saudi Arabia brands with international brands. The bottle characteristics and patient feedback were similar between the local and international topical glaucoma medications. However, there were differences between the local and international brands in drug volume, bottle squeezability. Hence, patient compliance and drop dosage may differ based on the origin of manufacture.

  8. Serious eye injuries caused by bottles containing carbonated drinks

    Science.gov (United States)

    Kuhn, F; Mester, V; Morris, R; Dalma, J

    2004-01-01

    Aim: To analyse serious eye injuries caused by bottles containing pressurised drinks. Methods: Retrospective review of the databases of US, Hungarian, and Mexican eye injury registries. Results: In the combined database (12 889 injuries), 90 cases (0.7%) were caused by bottle tops or glass splinters. The incidence varied widely: 0.3% (United States), 3.1% (Hungary), and 0.9% (Mexico), as did the agent. Champagne bottle corks were responsible in 20% (United States), 71% (Hungary; p<0.0001), and 0% (Mexico). Most eyes improved, but 26% remained legally blind. Conclusions: The presence of warning labels on champagne bottles appears to reduce cork related eye injuries, as does using plastic bottles and caps. PMID:14693777

  9. Study on the squeezing effect of open-ended pipe piles

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    During the installation of a pipe pile,the soil around the pile will be squeezed out. This paper deals with this squeezing effect of open-ended pipe piles using the cylindrical cavity expansion theory. The characteristics of soil with different tension and compression moduli and dilation are involved by applying the elastic theory with different moduli and logarithmic strain. The closed-form solutions of the radius of the plastic region,the displacement of the boundary between the plastic region and the ela...

  10. Optimization of Squeeze Parameters and Modification of AlSi7Mg Alloy

    Directory of Open Access Journals (Sweden)

    A. Zyska

    2013-04-01

    Full Text Available The paper present the examination results concerning mechanical properties of castings made of AlSi7MG alloy in correlation both with the most significant squeeze casting parameters and with the modification treatment. Experiments were planned and held according to the 23 factorial design. The regression equations describing the influence of the squeeze pressure, the mould temperature, and the quantity of strontium modifier on the strength and elongation of the examined alloy were obtained. It was found that the main factor controlling the strength increase is the squeeze pressure, while the plasticity (A5 of the alloy is affected most advantageously by modification. The application of modification treatment in squeeze casting technology enables for production of the slab-type castings made of AlSi7Mg alloy exhibiting strength at the level of 230 MPa and elongation exceeding 14%.

  11. Squeezed light in optomechanical systems

    DEFF Research Database (Denmark)

    Harris, G. I.; Taylor, M. A.; Hoff, Ulrich Busk

    2012-01-01

    Squeezed light enhanced optomechanical measurements are demonstrated in both intra-cavity and biological contexts, with respective enhancements of 1.0 and 2.7 dB. Quantum enhanced microrheology of the cytoplasm of a yeast cell is thereby realized.......Squeezed light enhanced optomechanical measurements are demonstrated in both intra-cavity and biological contexts, with respective enhancements of 1.0 and 2.7 dB. Quantum enhanced microrheology of the cytoplasm of a yeast cell is thereby realized....

  12. Squeeze casting of aluminum alloy A380: Microstructure and tensile behavior

    Directory of Open Access Journals (Sweden)

    Li Fang

    2015-09-01

    Full Text Available A380 alloy with a relatively thick cross-section of 25 mm was squeeze cast using a hydraulic press with an applied pressure of 90 MPa. Microstructure and tensile properties of the squeeze cast A380 were characterized and evaluated in comparison with the die cast counterpart. Results show that the squeeze cast A380 possesses a porosity level much lower than the die cast alloy, which is disclosed by both optical microscopy and the density measurement technique. The results of tensile testing indicate the improved tensile properties, specifically ultimate tensile strength (UTS: 215.9 MPa and elongation (Ef: 5.4%, for the squeeze cast samples over those of the conventional high-pressure die cast part (UTS: 173.7 MPa, Ef: 1.0%. The analysis of tensile behavior shows that the squeeze cast A380 exhibits a high tensile toughness (8.5 MJ·m-3 and resilience (179.3 kJ·m-3 compared with the die cast alloy (toughness: 1.4 MJ·m-3, resilience: 140.6 kJ·m-3, despite that, during the onset of plastic deformation, the strain-hardening rate of the die cast specimen is higher than that of the squeeze cast specimens. The microstructure analyzed by the scanning electron microscopy (SEM shows that both the squeeze and die cast specimens contain the primary α-Al, Al2Cu, Al5FeSi phase and the eutectic Si phase. But, the Al2Cu phase present in the squeeze cast alloy is relatively large in size and quantity. The SEM fractography evidently reveals the ductile fracture features of the squeeze cast A380 alloy.

  13. Quantum Dynamical Theory for Squeezed Atom Laser

    Institute of Scientific and Technical Information of China (English)

    JING Hui; HAN Yi-Ang; CHEN Jing-Ling; MIAO Yuan-Xiu

    2000-01-01

    A model for the squeezed output coupler of the trapped Bose-Einstein condensed atoms is established with a simple many-boson system of two states with linear coupling, by preparing an initially squeezed light field. In the Bogoliubov approximation, its solutions show that the quadrature squeezing effect mutually oscillates between the coupling light field and the output atomic field. This manifests that the initially squeezed light will transform into a coherent state after some period of coupling interaction while the output atomic field is in a squeezed state.

  14. Squeezed States and Helmholtz Spectra

    CERN Document Server

    Francisco Delgado, C; Reyes, M A; Mielnik, Bogdan; Reyes, Marco A

    1997-01-01

    The 'classical interpretation' of the wave function psi(x) reveals an interesting operational aspect of the Helmholtz spectra. It is shown that the traditional Sturm-Liouville problem contains the simplest key to predict the squeezing effect for charged particle states.

  15. How to Measure Squeeze Out

    CERN Document Server

    Longacre, R S

    2016-01-01

    Squeeze out happen when the expanding central fireball flows around a large surface flux tube in a central Au-Au collision at RHIC. We model such an effect in a flux tube model. Two particle correlations with respect to the $v_2$ axis formed by the soft fireball particles flowing around this large flux tube is a way of measuring the effect.

  16. Chemical migration in drinking water stored in polyethylene terephthalate (PET) bottles: a source of controversy

    OpenAIRE

    Bach, Cristina; Dauchy, Xavier; Chagnon, Marie-Christine; Etienne, Serge

    2012-01-01

    International audience; Due to its chemical inertness and physical properties PET is particularly suitable for food packaging applications, especially for drinking water. More bottled water is consumed than other bottled beverages. This article is a survey and toxicological investigation of chemical compounds, which are able to diffuse from PET bottles to water. The exact detailed chemical composition of plastic materials is known only from information provided by manufacturers. A declaration...

  17. The Effect of two kinds of replacement transfusion bottle method for neonatal transfusion residual%两种更换输液瓶法对新生儿输液残留量的影响

    Institute of Scientific and Technical Information of China (English)

    陈继梅

    2012-01-01

    目的:控制新生儿静脉输液过程中输液瓶药液残留量,最大限度地保证药物剂量准确.方法:将需要输注的54瓶,容量为100 ml,装有50 ml 10%葡萄糖塑料材质输液瓶,随机分为对照组和观察组,每组27瓶,对照组在更换输液瓶时,待输液瓶内液体滴至瓶颈处,莫菲氏滴管上段输液器内有空气时,即更换输液瓶.观察组在更换输液瓶时,待输液瓶内液体滴至瓶颈处,莫菲氏滴管上段输液器内有空气时,操作者左手拇指与示指捏住输液瓶颈,右手将输液器排气管反折,置于左手中指与无名指之间,右手拇指与示指将输液器轻轻拔出瓶口约0.5 cm,然后挤压莫菲氏滴管,使输液瓶颈部残存的液体流入输液器内,再更换输液瓶.比较两种更换输液瓶法液体残留量.结果:观察组输液瓶残留液体量低于对照组(P<0.01).结论:管理者必须关注新生儿输液的每一个环节,控制各环节的药液丢失量,确保新生儿用药量的准确性.%Objective:To control neonatal venous infusion bottles of liquid medicine residue, the maximum guarantee drug dosage is accurate. Methods:The required transfusion of 54 bottles, of capacity 100 ml, but with 50ml 10% GS plastic infusion bottle, were randomly divided into two groups: observation group and control group, each group have 27 bottles, The control group in the transfusion bottle was replaced, the infusion bottle drops of the liquid to the bottleneck, the murphy dropper infusion in upper air,replacement transfusion bottle. The observation group in the transfusion bottle is replaced, the infusion bottle drops of the liquid to the bottleneck, the murphy dropper infusion in upper air, the left thumb and index finger to pinch the infusion bottleneck, right hand infusion exhaust pipe reflexed , placed in the left hand middle finger and ring finger, right hand thumb and index finger will infusion bottle mouth gently pulled out by approx 0.5 cm, then squeeze the

  18. Variations on the "Whoosh" Bottle Alcohol Explosion Demonstration Including Safety Notes

    Science.gov (United States)

    Fortman, John J.; Rush, Andrea C.; Stamper, Jennifer E.

    1999-08-01

    The explosion or burning of methanol, ethanol, n-propanol, and isopropanol in large small-necked bottles when ignited with a match has been studied with respect to the nature of the alcohol, temperature, concentration dilutions with water, oxygen concentration, plastic versus glass bottles, and salts added for color. The various effects are explained in terms of vapor pressures. Safety guidelines are emphasized.

  19. Coordinate-Dependent One- and Two-Mode Squeezing Transformation and the Corresponding Squeezed States

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    We introduce the coordinate-dependent one- and two-mode squeezing transformations and discuss the properties of the corresponding one-and two-mode squeezed states. We show that the coordinate-dependent one-and two-mode squeezing transformations can be constructed by the combination of two transformations, a coordinate-dependent displacement followed by the standard squeezed transformation. Such a decomposition turns a nonlinear problem into a linear one because all the calculations involving the nonlinear one- and two-mode squeezed transformation have been shown to be able to reduce to those only concerning the standard one- and two-mode squeezed states.

  20. A New Bottle Design Decreases Hypoxemic Episodes during Feeding in Preterm Infants

    Directory of Open Access Journals (Sweden)

    Alejandro Jenik

    2012-01-01

    Full Text Available Oxygen saturation is lower during bottle feeding than during breastfeeding in preterm infants. Our objective was to compare two different bottle systems in healthy preterm infants before discharge in terms of SpO2 and oral feeding efficiency (rate of milk intake. Infants without supplement oxygen needs were evaluated twice on the same day during two consecutive feeds, by the same nurse. Infants served as their own controls for comparison of two systems of bottles, the order of which was randomized. The new bottle's nipple design mimics mom's breast in shape and feel, and the bottle vents to air when the child sucks on the nipple. The other system was the hospital's standard plastic bottle with silicone nipple. The rate of milk intake was calculated as the total volume transferred minus volume lost divided by time of feeding, mL/min. Thirty-four infants (BW: 1,163±479.1 g were studied at 35.4±1.3 weeks after-conception. SpO2 was significantly higher in infants fed with the new bottle design. Milk intake rate was significantly higher with the new bottle than with the standard bottle design. The new bottle design improves oral feeding performance in preterm infants near to discharge when compared to that of a standard bottle.

  1. A New Bottle Design Decreases Hypoxemic Episodes during Feeding in Preterm Infants.

    Science.gov (United States)

    Jenik, Alejandro; Fustiñana, Carlos; Marquez, Maritza; Mage, David; Fernandez, Gloria; Mariani, Gonzalo

    2012-01-01

    Oxygen saturation is lower during bottle feeding than during breastfeeding in preterm infants. Our objective was to compare two different bottle systems in healthy preterm infants before discharge in terms of SpO(2) and oral feeding efficiency (rate of milk intake). Infants without supplement oxygen needs were evaluated twice on the same day during two consecutive feeds, by the same nurse. Infants served as their own controls for comparison of two systems of bottles, the order of which was randomized. The new bottle's nipple design mimics mom's breast in shape and feel, and the bottle vents to air when the child sucks on the nipple. The other system was the hospital's standard plastic bottle with silicone nipple. The rate of milk intake was calculated as the total volume transferred minus volume lost divided by time of feeding, mL/min. Thirty-four infants (BW: 1, 163 ± 479.1 g) were studied at 35.4 ± 1.3 weeks after-conception. SpO(2) was significantly higher in infants fed with the new bottle design. Milk intake rate was significantly higher with the new bottle than with the standard bottle design. The new bottle design improves oral feeding performance in preterm infants near to discharge when compared to that of a standard bottle.

  2. Migration of 2-butoxyethyl acetate from polycarbonate infant feeding bottles

    DEFF Research Database (Denmark)

    Petersen, Jens Højslev; Lund, K.H.

    2003-01-01

    An enforcement campaign was carried out to assess the migration of 2-butoxyethyl acetate (2-BEA) from polycarbonate infant feeding bottles intended for repeated use. Migration was measured by three successive migration tests into two of the European Union official food simulants: distilled water...... and 3% acetic acid testing at 40degrees C for 10 days. The Danish Veterinary and Food Administration (DVFA) has assessed that a migration above 0.33 mg for 2-BEA and a group of eight related substances kg(-1) foodstuff from plastics articles used exclusively for infants is unacceptable. Migration of 2......-BEA was found from eight of 12 bottles. However, migration above the target value of 0.33 mg kg(-1) was not observed in the third decisive test from any of the 12 different brands of polycarbonate feeding bottles. A migration of between 0.05 and 0.26 mg kg(-1) from seven of 12 bottles was measured...

  3. How to Measure Squeeze Out

    Energy Technology Data Exchange (ETDEWEB)

    Longacre, R. S. [Brookhaven National Lab. (BNL), Upton, NY (United States). Physics Dept.

    2016-09-01

    Squeeze out happen when the expanding central fireball flows around a large surface flux tube in a central Au-Au collision at RHIC. We model such an effect in a flux tube model. Two particle correlations with respect to the v2 axis formed by the soft fireball particles flowing around this large flux tube is a way of measuring the effect.

  4. Squeezing wetting and nonwetting liquids.

    Science.gov (United States)

    Samoilov, V N; Persson, B N J

    2004-01-22

    We present molecular-dynamics results for the squeezing of octane (C8H18) between two approaching solid elastic walls with different wetting properties. The interaction energy between the octane bead units and the solid walls is varied from a very small value (1 meV), corresponding to a nonwetting surface with a very large contact angle (nearly 180 degrees), to a high value (18.6 meV) corresponding to complete wetting. When at least one of the solid walls is wetted by octane we observe well defined molecular layers develop in the lubricant film when the thickness of the film is of the order of a few atomic diameters. An external squeezing-pressure induces discontinuous, thermally activated changes in the number n of lubricant layers (n-->n-1 layering transitions). With increasing interaction energy between the octane bead units and the solid walls, the transitions from n to n-1 layers occur at higher average pressure. This results from the increasing activation barrier to nucleate the squeeze-out with increasing lubricant-wall binding energy (per unit surface area) in the contact zone. Thus, strongly wetting lubricant fluids are better boundary lubricants than the less wetting ones, and this should result in less wear. We analyze in detail the effect of capillary bridge formation (in the wetting case) and droplets formation (in the nonwetting case) on the forces exerted by the lubricant on the walls. For the latter case small liquid droplets may be trapped at the interface, resulting in a repulsive force between the walls during squeezing, until the solid walls come into direct contact, where the wall-wall interaction may be initially attractive. This effect is made use of in some practical applications, and we give one illustration involving conditioners for hair care application.

  5. BOTTLE MATERIAL AND CLEANSING PROCEDURES OF INFANT FEEDING BOTTLES.

    Science.gov (United States)

    Kuan, Wen-Hui; Chen, Yi-Lang

    2016-01-01

    The cleanliness of feeding bottles is vital for child health. Although machine cleansing of bottles in the food industry has been established, mechanical and manual cleansing methods are highly variable. This study was undertaken to determine the differences in the cleanliness of bottles that were cleaned using various combinations of bottle materials [glass and polypropylene (PP)], rinsing water volumes (1/3, 1/2, and 2/3 capacity of a bottle), and sustained shaking times (5 seconds and 20 seconds). Total organic carbon (TOC) and conductivity measurements were respectively used to evaluate the rinsed quantities of organic and inorganic formula residue from feeding bottles. The results indicated that glass bottles filled with rinsing water to 2/3 of their capacity showed the most efficient cleansing performance. However, the PP bottles exhibited a relatively poor cleansing result, particularly for organic cleanliness. The organic residue tends to accumulate on the PP bottle interior because of the aggregation of compounds with similar properties. The shaking time hardly influenced the cleanliness. The glass bottle was superior to the PP bottle in both organic and inorganic cleanliness, and organic constituents were more difficult to rinse from the bottle than the inorganic constituents were.

  6. Polarization squeezing with photonic crystal fibers

    DEFF Research Database (Denmark)

    Milanovic, J.; Huck, Alexander; Heersink, J.

    2007-01-01

    We report on the generation of polarization squeezing by employing intense, ultrashort light pulses in a single pass method in photonic crystal fibers. We investigated the squeezing behavior near the zero-dispersion wavelength and in the anomalous dispersion regime by using two distinct fibers. We...... observed a maximal squeezing at 810 nm of -3.3 +/- 0.3 dB with an excess noise of +16.8 +/- 0.3 dB in the anomalous regime. Correcting for linear and interference losses between the polarization modes, this corresponds to -6 +/- 1 dB. The ratio of squeezing to excess noise indicates the creation of a much...

  7. Spin squeezing in nonlinear spin coherent states

    OpenAIRE

    Wang, Xiaoguang

    2001-01-01

    We introduce the nonlinear spin coherent state via its ladder operator formalism and propose a type of nonlinear spin coherent state by the nonlinear time evolution of spin coherent states. By a new version of spectroscopic squeezing criteria we study the spin squeezing in both the spin coherent state and nonlinear spin coherent state. The results show that the spin coherent state is not squeezed in the x, y, and z directions, and the nonlinear spin coherent state may be squeezed in the x and...

  8. Study on the squeezing effect of open-ended pipe piles

    Institute of Scientific and Technical Information of China (English)

    Yan-er Lu; Jun-jie Zheng; Jian-hua Yin

    2009-01-01

    During the installation of a pipe pile, the soil around the pile will be squeezed out. This paper deals with this squeezing effect of open-ended pipe piles using the cylindrical cavity expansion theory. The characteristics of soil with different tension and compression modnli and dilation are involved by applying the elastic theory with different moduli and logarithmic strain. The closed-form solutions of the radius of the plastic region, the displacement of the boundary between the plastic region and the elastic region and the expansion pressure on the external surface of the pipe piles are obtained. When obtaining these solutions, the soil ping in the open-ended pipe pile is considered by employing an incremental filling ratio to quantify the degree of soil plugging. Moreover, the effects of the ratio of tension and compression moduli, angle of dilation and incremental filling ratio on the radius of the plastic region and the expansion pressure on the external surface of the pipe pile are investigated. The parametric analyses show that it is necessary and important to consider the difference between the tension modulus and compression modulus, dilation angle and incremental filling ratio for studying the squeezing effect of open-ended pipe pile installation. It is concluded that the analytical solutions presented in this paper are suitable for studying the squeezing effect of open-ended pipe piles.

  9. Co-leaching of brominated compounds and antimony from bottled water.

    Science.gov (United States)

    Andra, Syam S; Makris, Konstantinos C; Shine, James P; Lu, Chensheng

    2012-01-01

    A fast-growing bottled water market is occasionally challenged by reports calling for contaminant leaching from water-contact materials (plastics). Our focus was on leaching of antimony (Sb) and brominated compounds expressed by total soluble bromine (Br) measurements, including those of polybrominated diphenyl ethers (PBDE). Studies are lacking on concomitant leaching of two or more inorganic plastic constituents from the same bottle. A market-representative basket survey of bottled water was initiated in Boston, USA supermarkets. Bottled water classes sampled were: i) non-carbonated (NCR), ii) carbonated (CR), and iii) non-carbonated and enriched (NCRE). Plastic bottle materials sampled were: polyethylene terephthalate (PET), high-density polyethylene (HDPE), polystyrene (PS), and polycarbonate (PC). Storage conditions for the 31 bottled water samples were: 23°C temperature, no-shaking and 12h/12h light/dark for 60days of equilibration. Average Br and Sb concentrations after 60-days of storage followed the order of NCRPET. Upon quantitative validation of PBDE leaching from certain plastic bottles into water, a revisit to existing PBDE exposure assessment reports will be deemed necessary. Copyright © 2011 Elsevier Ltd. All rights reserved.

  10. Simultaneous polarization squeezing in polarized N photon state and diminution on a squeezing operation

    CERN Document Server

    Shukla, Namrata

    2016-01-01

    We study polarization squeezing of a pure photon number state which is obviously polarized but the mere change in the basis of polarization leads to simultaneous polarization squeezing in all the components of Stokes operator vector except those falling along or perpendicular to the direction of polarization state, is observed. We use the most general definition of polarization squeezing and discuss the experimental feasibility of the result. We also observe that a squeezing operation like non-degenerate parametric amplification of the state does not reveal simultaneous squeezing in all Stokes operator vectors and decreases in this sense.

  11. The dependence of fidelity on the squeezing parameter in teleportation of the squeezed coherent states

    Institute of Scientific and Technical Information of China (English)

    Zhang Jing-Tao; He Guang-Qiang; Ren Li-Jie; Zeng Gui-Hua

    2011-01-01

    This paper investigates an analytical expression of teleportation fidelity in the teleportation scheme of a single mode of electromagnetic field. The fidelity between the original squeezed coherent state and the teleported one is expressed in terms of the squeezing parameter r and the quantum channel parameter (two-mode squeezed state) p. The results of analysis show that the fidelity increases with the increase of the quantum channel parameter p, while the fidelity decreases with the increase of the squeezing parameter r of the squeezed state. Thus the coherent state (r = 0)is the best quantum signal for continuous variable quantum teleportation once the quantum channel is built.

  12. Teleportation of Squeezed Entangled State

    Institute of Scientific and Technical Information of China (English)

    HU Li-Yun; ZHOU Nan-Run

    2007-01-01

    Based on the coherent entangled state |α, x> we introduce the squeezed entangled state (SES). Then we propose a teleportation protocol for the SES by using Einstein-Podolsky-Rosen entangled state |η>as a quantum channel.The calculation is greatly simplified by virtue of the Schmidt decompositions of both |α, x>and |η>. Any bipartite states that can be expanded in terms of |α, x>may be teleported in this way due to the completeness of |α, x>.

  13. Parsing polarization squeezing into Fock layers

    DEFF Research Database (Denmark)

    Mueller, Christian R.; Madsen, Lars Skovgaard; Klimov, Andrei B.

    2016-01-01

    We investigate polarization squeezing in squeezed coherent states with varying coherent amplitudes. In contrast to the traditional characterization based on the full Stokes parameters, we experimentally determine the Stokes vector of each excitation subspace separately. Only for states with a fix...

  14. 30 years of squeezed light generation

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund; Gehring, Tobias; Marquardt, Christoph;

    2016-01-01

    Squeezed light generation has come of age. Significant advances on squeezed light generation have been made over the last 30 years—from the initial, conceptual experiment in 1985 till today’s top-tuned, application-oriented setups. Here we review the main experimental platforms for generating qua...

  15. Nuclear spin squeezing via electric quadrupole interaction

    Science.gov (United States)

    Aksu Korkmaz, Yaǧmur; Bulutay, Ceyhun

    2016-01-01

    Control over nuclear-spin fluctuations is essential for processes that rely on preserving the quantum state of an embedded system. For this purpose, squeezing is a viable alternative, so far that has not been properly exploited for the nuclear spins. Of particular relevance in solids is the electric quadrupole interaction (QI), which operates on nuclei having spin higher than 1/2. In its general form, QI involves an electric-field gradient (EFG) biaxiality term. Here, we show that as this EFG biaxiality increases, it enables continuous tuning of single-particle squeezing from the one-axis twisting to the two-axis countertwisting limits. A detailed analysis of QI squeezing is provided, exhibiting the intricate consequences of EFG biaxiality. The initial states over the Bloch sphere are mapped out to identify those favorable for fast initial squeezing, or for prolonged squeezings. Furthermore, the evolution of squeezing in the presence of a phase-damping channel and an external magnetic field are investigated. We observe that dephasing drives toward an antisqueezed terminal state, the degree of which increases with the spin angular momentum. Finally, QI squeezing in the limiting case of a two-dimensional EFG with a perpendicular magnetic field is discussed, which is of importance for two-dimensional materials, and the associated beat patterns in squeezing are revealed.

  16. Quantum Averaging of Squeezed States of Light

    DEFF Research Database (Denmark)

    Squeezing has been recognized as the main resource for quantum information processing and an important resource for beating classical detection strategies. It is therefore of high importance to reliably generate stable squeezing over longer periods of time. The averaging procedure for a single qu...

  17. Spin squeezing an ultracold molecule

    CERN Document Server

    Bhattacharya, M

    2015-01-01

    Most research on spin squeezing thus far has focused on realizations involving either atomic or nuclear degrees of freedom. In this article we discuss a concrete proposal for spin squeezing the ultracold ground state polar paramagnetic molecule OH, a system currently under fine control in the laboratory. Starting from an experimentally relevant effective Hamiltonian, we identify a parameter regime where different combinations of static electric and magnetic fields can be used to realize the single-axis twisting Hamiltonian of Kitagawa and Ueda [M. Kitagawa and M. Ueda, Phys. Rev. A 47, 5138 (1993)], the uniform field Hamiltonian proposed by Law et al. [C. K. Law, H. T Ng and P. T. Leung, Phys. Rev. A 63, 055601 (2001)], and a model of field propagation in a Kerr medium considered by Agarwal and Puri [G. S. Agarwal and R. R. Puri, Phys. Rev. A 39, 2969 (1989)]. To support our conclusions, we provide analytical expressions as well as numerical calculations, including optimization of field strengths and accounti...

  18. Displacement of Propagating Squeezed Microwave States

    Science.gov (United States)

    Fedorov, Kirill G.; Zhong, L.; Pogorzalek, S.; Eder, P.; Fischer, M.; Goetz, J.; Xie, E.; Wulschner, F.; Inomata, K.; Yamamoto, T.; Nakamura, Y.; Di Candia, R.; Las Heras, U.; Sanz, M.; Solano, E.; Menzel, E. P.; Deppe, F.; Marx, A.; Gross, R.

    2016-07-01

    Displacement of propagating quantum states of light is a fundamental operation for quantum communication. It enables fundamental studies on macroscopic quantum coherence and plays an important role in quantum teleportation protocols with continuous variables. In our experiments, we have successfully implemented this operation for propagating squeezed microwave states. We demonstrate that, even for strong displacement amplitudes, there is no degradation of the squeezing level in the reconstructed quantum states. Furthermore, we confirm that path entanglement generated by using displaced squeezed states remains constant over a wide range of the displacement power.

  19. Integrated source of broadband quadrature squeezed light

    DEFF Research Database (Denmark)

    Hoff, Ulrich Busk; Nielsen, Bo Melholt; Andersen, Ulrik Lund

    2015-01-01

    An integrated silicon nitride resonator is proposed as an ultracompact source of bright single-mode quadrature squeezed light at 850 nm. Optical properties of the device are investigated and tailored through numerical simulations, with particular attention paid to loss associated with interfacing...... squeezing spectrum for intra-cavity pump self-phase modulation. Subject to standard material loss and detection efficiencies, we find that the device holds promises for generating substantial quantum noise squeezing over a bandwidth exceeding 1 GHz. In the low-propagation loss regime, approximately -6 d...

  20. Squeeze Film Damping for Aircraft Gas Turbines

    Directory of Open Access Journals (Sweden)

    R. W. Shende

    1988-10-01

    Full Text Available Modern aircraft gas turbine engines depend heavily on squeeze film damper supports at the bearings for abatement of vibrations caused by a number of probable excitation sources. This design ultimately results in light-weight construction together with higher efficiency and reliability of engines. Many investigations have been reported during past two decades concerning the functioning of the squeeze film damper, which is simple in construction yet complex in behaviour with its non-linearity and multiplicity of variables. These are reviewed in this article to throw light on the considerations involved in the design of rotor-bearing-casing systems incorporating squeeze film dampers.

  1. Model on surface borehole squeezing deformation fracture*

    Institute of Scientific and Technical Information of China (English)

    SUN Hai-tao; HU Qian-ting; HUANG Sheng-shu

    2009-01-01

    As a good method to solve the problem of high methane on the workface and in the goaf, drawing coal strata methane through a surface borehole is used. However, the excavation affected the overlying rock strata greatly. When the excavation face passed through the surface borehole position, the surface borehole fractures fast. This problem was seriously related to the unformed squeeze effect. Therefore, a squeezing deformation fracture model based on the rock strata squeezing effect was set up. At the same time, a 3DEC simulation model is presented to confirm the theory. The result shows that the mod-el is reliable and has a good engineering application value.

  2. Parity Breaking Medium and Squeeze Operators

    CERN Document Server

    Andrianov, A A; Soldati, R

    2016-01-01

    The transition between a Minkowski space region and a parity breaking medium domain is thoroughly discussed. The requirement of continuity of the field operator content across the separating boundary of the two domains leads to Bogolyubov transformations, squeezed pairs states and squeeze operators that turn out to generate a functional SU(2) algebra. According to this algebraic approach, the reflection and transmission probability amplitude across the separating boundary are computed. The suitable generalization of the well known Sauter-Schwinger-Nikishov formula to the emission or absorption of squeezed pairs out of the vacuum is obtained.

  3. Coherent and squeezed states for the 3D harmonic oscillator

    Science.gov (United States)

    Mazouz, Amel; Bentaiba, Mustapha; Mahieddine, Ali

    2017-01-01

    A three-dimensional harmonic oscillator is studied in the context of generalized coherent states. We construct its squeezed states as eigenstates of linear contribution of ladder operators which are associated to the generalized Heisenberg algebra. We study the probability density to show the compression effect on the squeezed states. Our analysis reveals that squeezed states give us some freedom on the precise knowledge of position of the particle while maintaining the Heisenberg uncertainty relation minimum, squeezed states remains squeezed states over time.

  4. Squeezing through: capsule or bubble?

    CERN Document Server

    Dawson, Geoffrey

    2013-01-01

    In this fluid dynamics video, we compare the deformation of two flexible particles as they propagate through a sudden constriction of a liquid filled channel under constant-flux flow: a gas bubble, and a capsule formed by encapsulating a liquid droplet in a cross-linked polymeric membrane. Both bubble and capsule adopt highly contorted configurations as they squeeze through the constriction, exhibit broadly similar features over a wide range of flow rates, and rupture for sufficiently high flow rates. However, at flow rates prior to rupture, certain features of the deformation allow bubble and capsule to be distinguished: bubbles exhibit a tip-streaming singularity associated with critical thinning of the rear of the bubble, while the capsule membrane wrinkles under large compressive stresses induced by the constriction.

  5. Flexural Toughness of Ring-Shaped Waste Bottle Fiber Concrete

    Directory of Open Access Journals (Sweden)

    Faisal S. K.

    2016-01-01

    Full Text Available Polyethylene terephthalate (PET bottles are plastic containers that are typically discarded, and thus, cause environmental pollution. To solve this problem, PET bottles are recycled incorporating with concrete. A ring-shaped PET (RPET fiber are introduced in this study and designed with a special shape to mobilize fiber yielding rather than fiber pullout. Therefore, aim of this paper is to investigate the influence of RPET bottles fibre in terms of toughness strength. The width of RPET fibers is fixed at 5 and 10 mm and the loads were applied to the third points of the specimen. The experiment indicates that RPET-5 and RPET-10 FC presented an increase in the toughness index of I20 on averages of 23.1% and 39.9% respectively, compared to normal specimens. It can conclude that incorporating RPET fiber in concrete presents significant improved of concrete properties.

  6. Thermodynamics of squeezed states in mesoscopic circuits

    Institute of Scientific and Technical Information of China (English)

    Ji Ying-Hua; Luo Hai-Mei; Liu Qing; Lei Min-Sheng

    2005-01-01

    Based on the information theory, we present a density matrix to discuss coherent and squeezed states in a mesoscopic LC circuit with time-dependent frequency. With the relevant operators included in the density matrix, a connection between the appearance of coherent and squeezed states is established, i.e., the quantum state evolution of the system is closely related to the initial state. Generally speaking, due to the effect of environment temperature, the mesoscopic LC circuit will evolve to a squeezed state when it initially lies in an excited state. In particular, at a low temperature, step changes of circuit parameters will result in a squeezed minimum uncertainty state if the resonance frequency remains the same after the change.

  7. Performance of quantum Otto refrigerators with squeezing.

    Science.gov (United States)

    Long, Rui; Liu, Wei

    2015-06-01

    The performance of a quantum Otto refrigerator coupled to a squeezed cold reservoir has been evaluated using the χ figure of merit. We have shown that squeezing can enhance the coefficient of performance (COP) dramatically, surpassing the Carnot COP defined by the initial temperatures of the heat baths. Furthermore, when the squeezing parameter approaches its maximum value, the work input vanishes while the cooling rate remains finite, in apparent contravention of the second law of thermodynamics. To explain this phenomenon, we have shown that squeezing renders the thermal bath into a nonequilibrium state and the temperature of the bath becomes frequency dependent. Thereby, a correlation to the Carnot COP has been deduced. The results reveal that the COP under the maximum χ figure of merit is of the Curzon-Ahlborn style that cannot surpass the actual Carnot COP, and is thus consistent with the second law of thermodynamics.

  8. Displacement of squeezed propagating microwave states

    Science.gov (United States)

    Fedorov, Kirill G.; Zhong, Ling; Pogorzalek, Stefan; Eder, Peter; Fischer, Michael; Goetz, Jan; Wulschner, Friedrich; Xie, Edwar; Menzel, Edwin; Deppe, Frank; Marx, Achim; Gross, Rudolf

    Displacement of propagating squeezed states is a fundamental operation for quantum communications. It can be applied to fundamental studies of macroscopic quantum coherence and has an important role in quantum teleportation protocols with propagating microwaves. We generate propagating squeezed states using a Josephson parametric amplifier and implement displacement using a cryogenic directional coupler. We study single- and two-mode displacement regimes. For the single-mode displacement we find that the squeezing level of the displaced squeezed state does not depend on the displacement amplitude. Also, we observe that quantum entanglement between two spatially separated channels stays constant across 4 orders of displacement power. We acknowledge support by the German Research Foundation through SFB 631 and FE 1564/1-1, the EU project PROMISCE, and Elite Network of Bavaria through the program ExQM.

  9. Performance of quantum Otto refrigerators with squeezing

    Science.gov (United States)

    Long, Rui; Liu, Wei

    2015-06-01

    The performance of a quantum Otto refrigerator coupled to a squeezed cold reservoir has been evaluated using the χ figure of merit. We have shown that squeezing can enhance the coefficient of performance (COP) dramatically, surpassing the Carnot COP defined by the initial temperatures of the heat baths. Furthermore, when the squeezing parameter approaches its maximum value, the work input vanishes while the cooling rate remains finite, in apparent contravention of the second law of thermodynamics. To explain this phenomenon, we have shown that squeezing renders the thermal bath into a nonequilibrium state and the temperature of the bath becomes frequency dependent. Thereby, a correlation to the Carnot COP has been deduced. The results reveal that the COP under the maximum χ figure of merit is of the Curzon-Ahlborn style that cannot surpass the actual Carnot COP, and is thus consistent with the second law of thermodynamics.

  10. Pulsed squeezed vacuum characterization without homodyning

    CERN Document Server

    Wenger, J; Tualle-Brouri, R; Cerf, N J; Grangier, P; Grangier, Ph.

    2004-01-01

    Direct photon detection is experimentally implemented to measure the squeezing and purity of a single-mode squeezed vacuum state without an interferometric homodyne detection. Following a recent theoretical proposal [arXiv quant-ph/0311119], the setup only requires a tunable beamsplitter and a single-photon detector to fully characterize the generated Gaussian states. The experimental implementation of this procedure is discussed and compared with other reference methods.

  11. Squeezing States of Magnons in a Ferromagnet

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    In this paper, we conduct an investigation into magnon self-squeezing states in a ferromagnet. In these states, the quantum fluctuations of the spin components can be lower than the zero-point quantum fluctuations of the coherent states. Through calculating the expectation values of spin fluctuations we gain the condition of achieving magnon self-squeezing. We introduce the mean-field theory for dealing with the nonlinear interaction term of Hamiltonian of magnon system.

  12. Dynamics of squeezing from generalized coherent states

    CERN Document Server

    De Martino, S; Illuminati, F; De Martino, Salvatore; De Siena, Silvio; Illuminati, Fabrizio

    1995-01-01

    We extend the definition of generalized coherent states to include the case of time-dependent dispersion. We introduce a suitable operator providing displacement and dynamical rescaling from an arbitrary ground state. As a consequence, squeezing is naturally embedded in this framework, and its dynamics is ruled by the evolution equation for the dispersion. Our construction provides a displacement-operator method to obtain the squeezed states of arbitrary systems.

  13. Concentrations of selected trace elements in mineral and spring bottled waters on the Serbian market.

    Science.gov (United States)

    Ristić, M; Popović, I; Pocajt, V; Antanasijević, D; Perić-Grujić, A

    2011-01-01

    Eight selected trace elements, which are generally included in regulations, were analyzed in 23 types of bottled waters. Ten mineral and seven spring bottled waters were from the Serbian market and six mineral bottled waters were obtained in different EU countries. For the purpose of comparison, selected tap waters were also analyzed. Inductively coupled plasma mass spectrometry (ICP-MS) was used for the analysis of trace elements (arsenic, cadmium, copper, manganese, nickel, lead and antimony). Results were compared with the Serbian regulations for bottled water, EU regulations and guideline values set by the World Health Organization for drinking water. With few exceptions, the trace element levels of most bottled waters were below the guideline values. However, a higher content of antimony was observed in waters from polyethylene terephthalate (PET) containers, indicating a potential leaching of this element from the plastic packaging.

  14. Ocular injuries from exploding glass-bottled Coca-Cola® drinks in Port Harcourt, Nigeria

    Directory of Open Access Journals (Sweden)

    Pedro-Egbe CN

    2011-05-01

    Full Text Available Chinyere Nnenne Pedro-Egbe, Chibuike Sydney Ejimadu, Henrietta NwachukwuDepartment of Ophthalmology, University of Port Harcourt Teaching Hospital, Port Harcourt, NigeriaBackground: Eye injuries and subsequent loss of vision from the glass and caps of exploding pressurized bottled drinks have been well reported, and as a result most developed countries now use mainly plastic bottles. In Nigeria, however, most drinks are still sold in glass bottles and ocular injuries from this source are therefore not uncommon.Aim: To retrospectively analyze ocular injuries resulting from exploding glass-bottled Coca-Cola® and propose ways of eliminating such injuries in future.Setting: Eye Clinic, University of Port Harcourt Teaching Hospital, Port Harcourt, Nigeria.Materials and methods: The medical records of all cases of ocular injury that presented at the Eye Clinic of the University of Port Harcourt Teaching Hospital over a 5-year period (January 2006 to December 2010 were retrieved and relevant data including age, sex, occupation, events surrounding bottle explosion, and type of ocular injury sustained were extracted.Results: A total of 426 cases of ocular injuries was seen during the period under review. There were 335 (78.6% males and 91 (21.4% females. Six patients had ocular injury from exploding glass-bottled Coca-Cola®, giving an incidence of 1.4%. The presenting visual acuities (VA were light perception (2 cases, counting fingers (2 cases, and 1 VA of 6/24 and 1 VA of 6/12. There were 4 (66.7% cases of corneoscleral laceration with uveal prolapse and 1 case of total hyphema.Conclusion: Because pressurized glass-bottles can explode with normal handling, legislation to ban the use of glass containers for bottling carbonated drinks will go a long way to reducing ocular morbidity from this source. Plastic bottles should be introduced as an alternative.Keywords: ocular injuries, exploding glass-bottled drink

  15. The Second International Workshop on Squeezed States and Uncertainty Relations

    Science.gov (United States)

    Han, D. (Editor); Kim, Y. S.; Manko, V. I.

    1993-01-01

    This conference publication contains the proceedings of the Second International Workshop on Squeezed States and Uncertainty Relations held in Moscow, Russia, on 25-29 May 1992. The purpose of this workshop was to study possible applications of squeezed states of light. The Workshop brought together many active researchers in squeezed states of light and those who may find the concept of squeezed states useful in their research, particularly in understanding the uncertainty relations. It was found at this workshop that the squeezed state has a much broader implication than the two-photon coherent states in quantum optics, since the squeeze transformation is one of the most fundamental transformations in physics.

  16. Complex Squeezing and Force Measurement Beyond the Standard Quantum Limit

    CERN Document Server

    Buchmann, L F; Kohler, J; Spethmann, N; Stamper-Kurn, D M

    2016-01-01

    A continuous quantum field, such as a propagating beam of light, may be characterized by a squeezing spectrum that is inhomogeneous in frequency. We point out that homodyne detectors, which are commonly employed to detect quantum squeezing, are blind to squeezing spectra in which the correlation between amplitude and phase fluctuations is complex. We find theoretically that such complex squeezing is a component of ponderomotive squeezing of light through cavity optomechanics. We propose a detection scheme, called synodyne detection, which reveals complex squeezing and allows its use to improve force detection beyond the standard quantum limit.

  17. Quantum-squeezing effects of strained multilayer graphene NEMS

    Directory of Open Access Journals (Sweden)

    Wang Yuelin

    2011-01-01

    Full Text Available Abstract Quantum squeezing can improve the ultimate measurement precision by squeezing one desired fluctuation of the two physical quantities in Heisenberg relation. We propose a scheme to obtain squeezed states through graphene nanoelectromechanical system (NEMS taking advantage of their thin thickness in principle. Two key criteria of achieving squeezing states, zero-point displacement uncertainty and squeezing factor of strained multilayer graphene NEMS, are studied. Our research promotes the measured precision limit of graphene-based nano-transducers by reducing quantum noises through squeezed states.

  18. Atomic Tunnelling Dynamics of Two Squeezed Bose-Einstein Condensates

    Institute of Scientific and Technical Information of China (English)

    LI Jin-Hui; KUANG Le-Man

    2003-01-01

    In this paper, tunnelling dynamics of squeezed Bose-Einstein condensates (BEC's) in the presence of the nonlinear self-interaction of each species, the interspecies nonlinear interaction, and the Josephson-like tunnelling interaction is investigated by using the second quantization approach. The influence of BEC squeezing on macroscopic quantum self-trapping (MQST) and quantum coherent atomic tunnelling is analyzed in detail. It is shown that the MQST and coherent atomic tunnelling between two squeezed BEC's can be manipulated through changing squeezing amplitude and squeezing phase of BEC squeezed states.

  19. Squeezed quadrature fluctuations in a gravitational wave detector using squeezed light.

    Science.gov (United States)

    Dwyer, S; Barsotti, L; Chua, S S Y; Evans, M; Factourovich, M; Gustafson, D; Isogai, T; Kawabe, K; Khalaidovski, A; Lam, P K; Landry, M; Mavalvala, N; McClelland, D E; Meadors, G D; Mow-Lowry, C M; Schnabel, R; Schofield, R M S; Smith-Lefebvre, N; Stefszky, M; Vorvick, C; Sigg, D

    2013-08-12

    Squeezed states of light are an important tool for optical measurements below the shot noise limit and for optical realizations of quantum information systems. Recently, squeezed vacuum states were deployed to enhance the shot noise limited performance of gravitational wave detectors. In most practical implementations of squeezing enhancement, relative fluctuations between the squeezed quadrature angle and the measured quadrature (sometimes called squeezing angle jitter or phase noise) are one limit to the noise reduction that can be achieved. We present calculations of several effects that lead to quadrature fluctuations, and use these estimates to account for the observed quadrature fluctuations in a LIGO gravitational wave detector. We discuss the implications of this work for quantum enhanced advanced detectors and even more sensitive third generation detectors.

  20. Design of process parameters for direct squeeze casting

    Institute of Scientific and Technical Information of China (English)

    Milan Zhang; Shuming Xing Liming Xiao; Peiwei Bao; Wen Liu; Qiao Xin

    2008-01-01

    On the basis of the analysis of solidification interval and temperature distribution of components manufactured by the squeeze casting method, formulas for calculating the solidification interval and compaction pressure were deduced according to the principal request that the compaction pressure should be equal to or greater than the plastic deformation resistance of the forming component when solidification ended. The solidification interval was proven to be associated with many factors, such as weight of the component, specific heat of the alloy, latent heat, pouring temperature, component temperature at the end of solidification and heat-transfer coefficients. The compaction pressure was related to the strain rate, deformation temperature, and dimension of the de-forming component. The solidification interval and compaction pressure calculated by the formulas deduced in this article were adopted in the production of 45 steel bidirectional chapiter valves, and components with excellent performance were manufactured.

  1. Porous squeeze-film flow

    KAUST Repository

    Knox, D. J.

    2013-11-14

    © 2013 © The authors 2013. Published by Oxford University Press on behalf of the Institute of Mathematics and its Applications. All rights reserved. The squeeze-film flow of a thin layer of Newtonian fluid filling the gap between a flat impermeable surface moving under a prescribed constant load and a flat thin porous bed coating a stationary flat impermeable surface is considered. Unlike in the classical case of an impermeable bed, in which an infinite time is required for the two surfaces to touch, for a porous bed contact occurs in a finite contact time. Using a lubrication approximation, an implicit expression for the fluid layer thickness and an explicit expression for the contact time are obtained and analysed. In addition, the fluid particle paths are calculated, and the penetration depths of fluid particles into the porous bed are determined. In particular, the behaviour in the asymptotic limit of small permeability, in which the contact time is large but finite, is investigated. Finally, the results are interpreted in the context of lubrication in the human knee joint, and some conclusions are drawn about the contact time of the cartilage-coated femoral condyles and tibial plateau and the penetration of nutrients into the cartilage.

  2. LHC Report: Freshly squeezed beams!

    CERN Multimedia

    Mike Lamont for the LHC Team

    2011-01-01

    After careful validation of  new machine settings, the LHC was ready for higher luminosity operation. New luminosity records have been set, but the operations team continues to wrestle with machine availability issues.   The commissioning of the squeeze to a ß* of 1 m in ATLAS and CMS described in the last Bulletin took until Wednesday, 7 September to complete. In order to validate the new set-up, beam losses were provoked in a controlled way with low intensity beams. The distribution of beam loss around the machine in these tests is known as a loss map. The loss maps showed that the collimation system is catching the large majority of beam losses as it should, and that the machine was ready for us to ramp the number of bunches back up and go to physics production. The ramp-up of the number of bunches went smoothly with fills at 264, 480, and 912 bunches on the way back to the machine’s previous record of 1380 bunches (first fill on Friday, 9 Se...

  3. 27 CFR 19.382 - Bottling tanks.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling tanks. 19.382... Manufacture of Articles Bottling, Packaging, and Removal of Products § 19.382 Bottling tanks. All spirits shall be bottled from tanks listed and certified as accurately calibrated in the notice of...

  4. LHC Report: Preparing for a tighter squeeze

    CERN Multimedia

    Jan Uythoven for the LHC Team

    2011-01-01

    The LHC is resuming operation after a planned period of machine development followed by a technical stop. The beams returned last Friday, in the evening of 2 September, and preparations are now being made to squeeze the beams further at the collision points, aiming for new luminosity records.   To obtain as many collisions as possible in the heart of the experiments, the beams are squeezed to very small beam sizes. The beam squeezing parameter is known by experts as beta-star: the smaller the ß*, the stronger the squeezing. During the machine development period that started on 24 August, tests were made for the high-luminosity experiments ATLAS and CMS with ß* values of 1 m instead of the 1.5 m used previously. Unfortunately these tests were only partially successful, as some of the beam was lost during the squeezing process. It is thought that the beam losses were caused by the collimators, which were moved closer to the beam, and by the reduced crossing angle of the beams at ...

  5. Relationship between squeezing and entangled state transformations

    CERN Document Server

    Fan Hong Yi

    2003-01-01

    We show that c-number dilation transform in the Einstein-Podolsky-Rosen (EPR) entangled state, i.e. vertical bar eta sub 1 , eta sub 2) -> vertical bar eta sub 1 , eta sub 2 /mu) (or vertical bar eta sub 1 , eta sub 2) -> vertical bar eta sub 1 /mu, eta sub 2)), maps onto a kind of one-sided two-mode squeezing operator exp left brace i lambda/2(P sub 1 + P sub 2)(Q sub 1 + Q sub 2) - lambda/2 right brace, (or exp left brace i lambda/2(P sub 1 - P sub 2)(Q sub 1 - Q sub 2) - lambda/2 right brace). Using the IWOP technique, we derive their normally ordered form and construct the corresponding squeezed states. In doing so, some new relationship between squeezing and entangled state transformation is revealed. The dynamic Hamiltonian for such a kind of squeezing evolution is derived. The properties and application of the one-sided squeezed state are briefly discussed. These states can also be obtained with the use of a beam splitter.

  6. Continuous squeeze casting process by mass production

    Institute of Scientific and Technical Information of China (English)

    Yun Xia; Rich Jacques

    2006-01-01

    Squeeze casting has become the most competitive casting process in the automotive industry because of its many advantages over high pressure die casting (HPDC). Many squeeze casting R & D and small amount volume making have been implemented around the world, but the mass production control still exists problem. SPX Contech squeeze casting process P2000 successfully achieved the goal of mass production; it includes lower metal turbulence, less gas entrapment, minimum volumetric shrinkage, and thus less porosity. Like other casting processes, however, the quality of squeeze castings is still sensitive to process control and gate and runner design. Casting defects can form in both die-filling and metal solidification phases. The occurrence of casting defects is directly attributed to improper adjustment or lack of control of process parameters including metal filling velocity, temperature, dwell time, cooling pattern, casting design, and etc. This paper presents examples using P2000 techniques to improve part quality in the following areas: runner & gate design, casting & runner layout in the die, squeeze pin application, high thermal conductivityinserts, cooling/heating systems, spray & lubricant techniques,and part stress calculation from shrinkage or displacement prediction after stress relief.

  7. Squeezing in the Real and Imaginary Spin Coherent States

    Institute of Scientific and Technical Information of China (English)

    YAN Dong; WANG Xiao-Guang; WU Ling-An

    2005-01-01

    @@ We study spin squeezing properties in the real and imaginary spin coherent states. We obtain analytical expressions of two spin squeezing parameters via a novel ladder operator formalism of the spin coherent state and the generation function method.

  8. Minimum uncertainty and squeezing in diffusion processes and stochastic quantization

    Science.gov (United States)

    Demartino, S.; Desiena, S.; Illuminati, Fabrizo; Vitiello, Giuseppe

    1994-01-01

    We show that uncertainty relations, as well as minimum uncertainty coherent and squeezed states, are structural properties for diffusion processes. Through Nelson stochastic quantization we derive the stochastic image of the quantum mechanical coherent and squeezed states.

  9. Spin Squeezing of One-Axis Twisting Model

    Science.gov (United States)

    Li, Song-Song

    2017-09-01

    We investigate spin squeezing of the one-axis twisting model. By using short-time approximation solutions of the angular momentum operators, we analytically and numerically calculate the spin squeezing parameter. It is shown that smaller linear interaction can produce a stronger spin squeezing and maintain a longer time interval. It is also shown that the stronger spin squeezing can be achieved by increasing the number of particles.

  10. Entropy Squeezing in the Quantum Heisenberg XY Spin Chains

    Institute of Scientific and Technical Information of China (English)

    CHANG Ping; SHAO Bin; ZOU Jian

    2009-01-01

    The time evolution of entropy squeezing for the two-qubit XYZ Heisenberg model in an external uniform magnetic field is investigated in the language of quantum information.The effect of different parameters such as magnetic field and anisotropy parameter on the properties of entropy squeezing and variance squeezing are discussed.It is shown that magnetic field and anisotropy parameter can enhance the entropy squeezing.

  11. Leggett-Garg Inequalities for Squeezed States

    CERN Document Server

    Martin, Jerome

    2016-01-01

    Temporal Bell inequalities, or Leggett-Garg Inequalities (LGI), are studied for continuous-variable systems placed in a squeezed state. The importance of those systems lies in their broad applicability which allows the description of many different physical settings in various branches of physics, ranging from cosmology to condensed matter physics and from optics to quantum information theory. LGI violations are explored and systematically mapped in squeezing parameter space. Configurations for which LGI violation occurs are found but it is shown that no violation can be obtained if all squeezing angles vanish, contrary to what happens for the spatial Bell inequalities. We also assess the effect of decoherence on the detectability of such violations. Our study opens up the possibility of new experimental designs for the observation of LGI violation.

  12. On the Squeezed Number States and their Phase Space Representations

    CERN Document Server

    Albano, L; Stephany, J

    2002-01-01

    We compute the photon number distribution, the Q distribution function and the wave functions in the momentum and position representation for a single mode squeezed number state. We discuss the oscillations which appear in the photon number distribution of squeezed number states for high values of the squeezing parameter. We compare our results with the formalism based on the interference in phase space.

  13. Coordinate-Dependent N-Mode Squeezing Transformations

    Institute of Scientific and Technical Information of China (English)

    ZHANG Wei; REN Gang; CHEN Xiang-Rong; SONG Tong-Qiang; CAI Ling-Cang; GOU Qing-Quan

    2008-01-01

    We introduce the coordinate-dependent N-mode squeezing transformation and show that it can be con-structed by the combination of two unitary transformations, a coordinate-dependent displacement followed by the stan-dard squeezed transformation. The properties of the corresponding N-mode squeezed states are also discussed.

  14. Generation and detection of squeezed state

    Institute of Scientific and Technical Information of China (English)

    SHANG Xu-dong; YU Li; FENG Xue-dong; YANG Bo-jun

    2008-01-01

    Soliton amplitude squeezed state is obtained and dctected by using asymmetric Sagnac interferometer and balanced homodyne detecting system.An improved photo detector circuit for quantum state detection is introduced.The circuit has a bandwidth of 10MHz and the saturation power is about 19 mW.A maximum photocurrent noise reduction of 1.1 dB below the shot noise is achieved.Taking the detection efficiency into account,the squeezing will be about 1.5 dB.

  15. Breaking beer bottles with cavitation

    Science.gov (United States)

    Jung, Sunny; Fontana, Jake; Palffy-Muhoray, Peter; Shelley, Michael

    2009-03-01

    Hitting the top of a beer bottle, nearly full of water, with an open hand can cause the bottle to break, with the bottom separating from upper section. We have studied this phenomenon using a high-speed camera, and observed the formation, coalescence and collapse of bubbles. The breaking of glass is due to cavitation, typically occurring near the bottom edge. We make numerical estimates of the relevant physical parameters, and compare these with experimental observations.

  16. Squeezing the limit: quantum benchmarks for the teleportation and storage of squeezed states

    Energy Technology Data Exchange (ETDEWEB)

    Owari, M; Plenio, M B [Institute for Mathematical Sciences, 53 Prince' s Gate, Imperial College London, London SW7 2PG (United Kingdom); Polzik, E S; Wolf, M M [Niels Bohr Institute, Copenhagen University, Blegdamsvej 17, DK-2100 Copenhagen Oe (Denmark); Serafini, A [Department of Physics and Astronomy, University College London, Gower Street, London WC1E 6BT (United Kingdom)], E-mail: m.owari@imperial.ac.uk

    2008-11-15

    We derive fidelity benchmarks for the quantum storage and teleportation of squeezed states of continuous variable systems, for input ensembles where the degree of squeezing s is fixed, no information about its orientation in phase space is given, and the distribution of phase-space displacements is a Gaussian. In the limit where the latter becomes flat, we prove analytically that the maximal classical achievable fidelity (which is 1/2 without squeezing, for s=1) is given by {radical}s/(1+s), vanishing when the degree of squeezing diverges. For mixed states, as well as for general distributions of displacements, we reduce the determination of the benchmarks to the solution of a finite-dimensional semidefinite program, which yields accurate, certifiable bounds thanks to a rigorous analysis of the truncation error. This approach may be easily adapted to more general ensembles of input states.

  17. Vacuum squeezing in atomic media with self-rotation

    CERN Document Server

    Matsko, A B; Scully, M O; Welch, G R; Budker, D; Kimball, D F; Rochester, S M; Yashchuk, V V

    2002-01-01

    When linearly polarized light propagates through a medium which causes self-rotation of elliptically polarized light, squeezed vacuum is produced in the orthogonal polarization. A simple relationship between the self-rotation angle for a given ellipticity and the degree of squeezing is developed. Taking into account absorption, we find the optimum condition for squeezing for any medium which causes self-rotation. Next, we analyze squeezing when the medium consists of a vapor of idealized, four-level atoms. Finally, we consider a medium consisting of a gas of multi-level Rb atoms, and analyze squeezing for light tuned near the D-lines under realistic conditions.

  18. Squeezed light for advanced gravitational wave detectors and beyond.

    Science.gov (United States)

    Oelker, E; Barsotti, L; Dwyer, S; Sigg, D; Mavalvala, N

    2014-08-25

    Recent experiments have demonstrated that squeezed vacuum states can be injected into gravitational wave detectors to improve their sensitivity at detection frequencies where they are quantum noise limited. Squeezed states could be employed in the next generation of more sensitive advanced detectors currently under construction, such as Advanced LIGO, to further push the limits of the observable gravitational wave Universe. To maximize the benefit from squeezing, environmentally induced disturbances such as back scattering and angular jitter need to be mitigated. We discuss the limitations of current squeezed vacuum sources in relation to the requirements imposed by future gravitational wave detectors, and show a design for squeezed light injection which overcomes these limitations.

  19. Chemometrics-enhanced fiber optic Raman detection, discrimination and quantification of chemical agents simulants concealed in commercial bottles

    Directory of Open Access Journals (Sweden)

    Nataly J. Galan-Freyle

    2014-11-01

    Full Text Available Chemometric techniques such as partial least squares combined with discriminant analysis (PLS–DA and artificial neural networks (ANN analysis were used to enhance the detection, discrimination and quantification of chemical warfare agents simulants. Triethyl phosphate (TEP mixed with commercial products in their original containers was analyzed through the container walls using fiber-optic-coupled Raman spectroscopy. Experiments were performed by employing a custom built optical fiber probe operating at 488 nm. Detection was accomplished using mixtures of the contents of the commercial bottles and water. The bottle materials included green plastic, green glass, clear plastic, clear glass, amber glass and white plastic. To account for the low scattering-peak intensities of some bottle materials, integration times were increased. Short integration times provided no information for amber glass and white plastic. The limits of detection were on the order of 1–5%, depending on bottle materials and contents. Good discrimination was achieved with PLS–DA when models were generated from a dataset originating from the same type of bottle material. ANN performed better when large sets of data were used, discriminating TEP from bottle materials and contents, as well as accurately classifying over 90% of the data.

  20. Newspaper+Water Bottle=?

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>这是由日本每日新闻社于201 3年为让更多的日本年轻人发现纸质报纸的价值而展开的营销战役。每日新闻社将报纸与瓶装水结合在一起,形成"News Bottle",即将新闻报道作为瓶装水的标签。其目的是为了在纸质报纸销售量逐年递减的今天,让年轻人更多地接触报纸,激发他们对于纸质报纸的阅读兴趣。每日新闻社通过365天持续更新瓶装水的标签,使人们每天都能在瓶装水上读到最新热点和头条新闻,以此来吸引年轻人的注意力,建立起年轻人与《每日新闻》的互动,最终得到年轻人们的自愿持续关注。每日新闻社还利用AR技术,让人们能通过移动

  1. Newspaper+Water Bottle=?

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>这是由日本每日新闻社于2013年为让更多的日本年轻人发现纸质报纸的价值而展开的营销战役。每日新闻社将报纸与瓶装水结合在一起,形成"News Bottle",即将新闻报道作为瓶装水的标签。其目的是为了在纸质报纸销售量逐年递减的今天,让年轻人更多地接触报纸,激发他们对于纸质报纸的阅读兴趣。每日新闻社通过365天持续更新瓶装水的标签,使人们每天都能在瓶装水上读到最新热点和头条新闻,以此来吸引年轻人的注意力,建立起年轻人与《每日新闻》的互

  2. Engineering Matter Interactions Using Squeezed Vacuum

    Directory of Open Access Journals (Sweden)

    Sina Zeytinoğlu

    2017-06-01

    Full Text Available Virtually all interactions that are relevant for atomic and condensed matter physics are mediated by quantum fluctuations of the electromagnetic field vacuum. Consequently, controlling the vacuum fluctuations can be used to engineer the strength and the range of interactions. Recent experiments have used this premise to demonstrate novel quantum phases or entangling gates by embedding electric dipoles in photonic cavities or wave guides, which modify the electromagnetic fluctuations. Here, we show theoretically that the enhanced fluctuations in the antisqueezed quadrature of a squeezed vacuum state allow for engineering interactions between electric dipoles without the need for a photonic structure. Thus, the strength and range of the interactions can be engineered in a time-dependent way by changing the spatial profile of the squeezed vacuum in a traveling-wave geometry, which also allows the implementation of chiral dissipative interactions. Using experimentally realized squeezing parameters and including realistic losses, we predict single-atom cooperativities C of up to 10 for the squeezed-vacuum-enhanced interactions.

  3. Squeeze Casting of Steel Weapon Components

    Science.gov (United States)

    1976-09-01

    equipment. The squeeze casting process also differs from rheo- casting.(10-12) Unlike the former, the rheocasting process (8) "Ferrous Die Casting...various phases of rheocasting . At least so far, the process has not been applied to fabrication of complex steel components of the type that are under

  4. Squeezing of Collective Excitations in Spin Ensembles

    DEFF Research Database (Denmark)

    Kraglund Andersen, Christian; Mølmer, Klaus

    2012-01-01

    We analyse the possibility to create two-mode spin squeezed states of two separate spin ensembles by inverting the spins in one ensemble and allowing spin exchange between the ensembles via a near resonant cavity field. We investigate the dynamics of the system using a combination of numerical an...

  5. Squeezing in a 2-D generalized oscillator

    Science.gov (United States)

    Castanos, Octavio; Lopez-Pena, Ramon; Manko, Vladimir I.

    1994-01-01

    A two-dimensional generalized oscillator with time-dependent parameters is considered to study the two-mode squeezing phenomena. Specific choices of the parameters are used to determine the dispersion matrix and analytic expressions, in terms of standard hermite polynomials, of the wavefunctions and photon distributions.

  6. Hartogs figure and symplectic non-squeezing

    CERN Document Server

    Sukhov, A

    2011-01-01

    We solve a problem on filling by Levi-flat hypersurfaces for a class of totally real 2-tori in a real 4-manifold with an almost complex structure tamed by an exact symplectic form. As an application we obtain a simple proof of Gromov's non-squeezing theorem in dimension 4 and new results on rigidity of symplectic structures.

  7. Integrated source of broadband quadrature squeezed light

    DEFF Research Database (Denmark)

    Hoff, Ulrich Busk; Nielsen, Bo Melholt; Andersen, Ulrik Lund

    2015-01-01

    An integrated silicon nitride resonator is proposed as an ultracompact source of bright single-mode quadrature squeezed light at 850 nm. Optical properties of the device are investigated and tailored through numerical simulations, with particular attention paid to loss associated with interfacing...

  8. Limits of noise squeezing in Kerr effect

    CERN Document Server

    Bajer, J; Tanas, R

    2002-01-01

    It is well known that the optical Kerr effect can be a source of highly squeezed light, however the analytical limit of the noise suppression has not been found yet. The process is reconsidered and an analytical estimation of the optimal quadrature noise level is presented. The validity of the new scaling law is checked numerically and analytically.

  9. Quantum teleportation of entangled squeezed vacuum states

    Institute of Scientific and Technical Information of China (English)

    蔡新华

    2003-01-01

    An optical scheme for probabilistic teleporting entangled squeezed vacuum states (SVS) is proposed. In this scheme,the teleported state is a bipartite entangled SVS,and the quantum channel is a tripartite entangled SVS.The process of the teleportation is achieved by using a 50/50 symmetric beamsplitter and photon detectors with the help of classical information.

  10. Squeezing more from a quantum nondemolition measurement

    DEFF Research Database (Denmark)

    Buchler, B.C.; Lam, P.K.; Bachor, H.A.

    2002-01-01

    We use a stable, 5 dB, amplitude squeezed source for a quantum nondomolition (QND) experiment. The performance of our QND system is enhanced by an electro-optic feedforward loop which improve,, the signal transfer efficiency. At best, we measure a total signal transfer of 1.81 and conditional var...

  11. DISCARD OF THE PLASTIC BOTTLES AND DETERMINATION OF AUTOMOTIVE LUBRICANT OIL RESIDUES IN RIO CLARO-SP = DESCARTE DE EMBALAGENS E QUANTIFICAÇÃO DO VOLUME DE ÓLEO LUBRIFICANTE RESIDUAL NO MUNICÍPIO DE RIO CLARO-SP

    Directory of Open Access Journals (Sweden)

    Edério Dino Bidóia

    2008-01-01

    Full Text Available Concerns about environment conservation have grown in recent years, mainly in industrialized countries, due to growing awareness in these societies regarding the importance of environment quality as the basis for the preservation of future generations. Thus, rather than viewing the environment as a good to be consumed by the productive sector, it is seen as world heritage of humanity. Although lubricant oil represents a small percentage of the waste generated by humans, its impact is very great. One ton of lubricant oil dumped into water systems is equivalent to the pollution caused by 40,000 inhabitants. Thus, only one liter of oil is able to consume the oxygen of a million liters of water, forming, in few days, a fine layer on the surface of 1000 m2 which blocks the passage of air and light for the aquatic organisms. In this context, a study was carried out to collect empty plastic automotive lubricant oil bottles at various gasoline stations in Rio Claro-SP to verify the final destination and determine the volume of lubricant remaining in the bottles. = As preocupações com a conservação do meio ambiente têm crescido nos últimos anos, principalmente em países industrializados, devido à consciência que tem sido construída nessas sociedades sobre a importância da qualidade ambiental como base para a preservação da vida das futuras gerações. A sua carga poluidora é equivalente a 40.000 habitantes por tonelada de óleo despejada em corpos d’água. Apenas um litro de óleo é capaz de esgotar o oxigênio de um milhão de litros de água, formando, em poucos dias, uma fina camada sobre a superfície de 1.000 m2, o que bloqueia a passagem de ar e luz, impedindo a respiração e a fotossíntese. Neste contexto, foi realizada uma pesquisa nos centros de lubrificação e postos de combustíveis do município de Rio Claro-SP para verificar o destino final das embalagens já utilizadas, teoricamente vazias, e também houve coleta destas

  12. Single-mode squeezing in arbitrary spatial modes

    CERN Document Server

    Semmler, Marion; Chille, Vanessa; Gabriel, Christian; Banzer, Peter; Aiello, Andrea; Marquardt, Christoph; Leuchs, Gerd

    2016-01-01

    As the generation of squeezed states of light has become a standard technique in laboratories, attention is increasingly directed towards adapting the optical parameters of squeezed beams to the specific requirements of individual applications. It is known that imaging, metrology, and quantum information may benefit from using squeezed light with a tailored transverse spatial mode. However, experiments have so far been limited to generating only a few squeezed spatial modes within a given setup. Here, we present the generation of single-mode squeezing in Laguerre-Gauss and Bessel-Gauss modes, as well as an arbitrary intensity pattern, all from a single setup using a spatial light modulator (SLM). The degree of squeezing obtained is limited mainly by the initial squeezing and diffractive losses introduced by the SLM, while no excess noise from the SLM is detectable at the measured sideband. The experiment illustrates the single-mode concept in quantum optics and demonstrates the viability of current SLMs as fl...

  13. DETERMINATION OF PHTHALATES FROM BOTTLED WATER BY GC-MS

    Directory of Open Access Journals (Sweden)

    IRINA DUMITRAȘCU

    2012-03-01

    Full Text Available Determination of phthalates from bottled water by GC-MS. Phthalates are ubiquitous pollutants in the environment, due to their widespread use in the last years. These compounds are used principally as plasticizers, to impact flexibility, workability and durability to polymers but they can also be found in products such as paints, adhesives, inks and cosmetics. Phthalates are not chemically bounded to polymers; hence they are easily released and migrate into foods, beverages and drinking water from the packaging or bottling materials or manufacturing processes. This process accelerates as plastic products age and break down. With respect to their endocrine disrupting potential, phthalates such as benzyl butyl phthalate (BBP, di-butyl phthalate (DBP and di-isobutyl phthalate (DIBP have been found to elicit estrogenic responses in in vitro assays. It is possible that phthalates are a contributory factor to endocrine-mediated adverse effects observed in wildlife and humans over the past few decades. In this experiment we have analyzed the phthalates from different bottled waters purchased from the market. Determination by gas chromatography in combination with mass spectrometry detector (GC–MS in electronic ionization mode (EI with selected-ion monitoring (SIM acquisition method (GC–MS (EI–SIM has been carried out. Methods have been developed for both qualitative and quantitative analysis of phthalates. The base peak (m/z = 149 of all the phthalates was selected for the screening studies. The characteristic ions of each compound were chosen for quantitative studies.

  14. High-order squeezing of the quantum electromagnetic field and the generalized uncertainty relations in two-mode squeezed states

    Science.gov (United States)

    Li, Xi-Zeng; Su, Bao-Xia

    1994-01-01

    It is found that two-mode output quantum electromagnetic field in two-mode squeezed states exhibits higher-order squeezing to all even orders. And the generalized uncertainty relations are also presented for the first time. The concept of higher-order squeezing of the single-mode quantum electromagnetic field was first introduced and applied to several processes by Hong and Mandel in 1985. Lately Li Xizeng and Shan Ying have calculated the higher-order squeezing in the process of degenerate four-wave mixing and presented the higher-order uncertainty relations of the fields in single-mode squeezed states. In this paper we generalize the above work to the higher-order squeezing in two-mode squeezed states. The generalized uncertainty relations are also presented for the first time.

  15. The HPLC Detection Method of DNOP and DBP in the Beverage of Plastic Bottle Packing%瓶装饮料中DNOP、DBP类增塑剂的液相色谱检测方法

    Institute of Scientific and Technical Information of China (English)

    王楠; 王伟; 张玉; 葛杭丽; 黎天天

    2012-01-01

    邻苯二甲酸酯类是一类重要的增塑剂,也是环境类激\\素,会影响动物内分泌系统;对人不仅有慢性毒性,致突变、致癌作用,还有生殖、发育毒性.本文研究高效液相色谱检测瓶装饮料中两种邻苯二甲酸酯(DNOP、DBP)的方法.样品经过滤、浓缩后过柱净化、富集,用50℃氮吹仪吹干,甲醇定容后过膜(0.22 μm),在UV 225nm处检测.以ProELUT PLS GLASS 200 mg/6mL小柱作为样品前处理净化柱,结果对DBP的加标回收率在83.4%~93.4%之间,对DBP的加标回收率在80.4%~86.0%之间.本实验条件下DBP和DNOP的仪器检出限均为0.01 μg/mL,说明用液相色谱法检测瓶装饮料中邻苯二甲酸酯类物质含量是可行的.且快速、有效.%Phthalate esters (PAEs) were a class of important plasticizers, and it also were the environmental estrogens, it affects the animal endocrine system. PAEs were not only with chronic toxic, mutagenic, carcinogenic effects to people, but also with reproductive and upgrowth toxicity. This study focused on the method of detection of DNOP and DBP in plastic packing beverage by HPLC. The sample were filtrated and enrichment by clean up column, and nitrogen drying at 50℃, and pass through 0.22 u,m film after fixed volume with methanol, and detected at 225 nm by HPLC. ProELUT PLS G1ASS 200 mg/6 mL as the clean up column, the recovery rate of DBP was 83.4%-93.4%, DNOP was 80.4%~86.0%. The detection limit of instrument was 0.01μg/mL. The results showed that the HPLC method was effective and convenient for the detection of DNOP and DBP in beverage.

  16. Identification of specific microorganisms in fresh squeezed street vended fruit juices

    Directory of Open Access Journals (Sweden)

    K Sahithi Reddy

    2016-01-01

    Full Text Available Introduction: In developing country like India, street foods such as salads and fresh cut fruits are widely consumed. Among all street foods, fruit juices are common beverages, consumed more because of higher consumer preference both in terms of taste and health. Moreover, there is a dearth of Indian studies on contamination of street vended fruit juices. Aim: To determine the pH and specific microorganisms in freshly squeezed street vended fruit juices. Materials and Methods: Four fruit juices i.e., Grapes, Sweet Lime, Pineapple and Sapota were chosen for the study. Juices were collected in summer season in months between April and June 2013. Ten samples of 50 ml each fruit juice was collected in sterile bottles from various street vendors of Dilshuknagar area of Hyderabad city. Transportation of samples to Food Toxicology laboratory, National Institute of Nutrition was done in the ice box and processing was done within 2–4 h. Results: All juices showed bacterial contamination except one sample of grape juice. Pineapple juice samples showed the high bacterial contamination with all samples positive for fecal coliforms and Shigella spp. (100%. Salmonella spp. was detected only in one sample of Sapota juice (10%. Significant difference among fruit juices for prevalence of microorganisms was seen only for Escherichia coli (P = 0.03 with least count in Grape juice (20%. Conclusion: Freshly squeezed street vended fruit juices were contaminated with pathogenic bacteria, which significantly attributed to public health problem.

  17. Radioactivity in French bottled waters

    Energy Technology Data Exchange (ETDEWEB)

    Loyen, J.; Brassac, A.; Augeray, C.; Fayolle, C.; Gleizes, M. [Institut de Radioprotection et de Surete Nucleaire - IRSN (France)

    2014-07-01

    As IRSN is considered as a reference laboratory for radioactivity measurements, French health ministry and French nuclear safety authority asked IRSN to carry out a study in order to get a fresh and complete status of radiological water quality of French bottled waters. The study was carried out during 12 months in 2012. A total of 142 bottled waters samples were analyzed (75 spring waters and 67 natural mineral waters). The laboratories of IRSN were in charge of: - systematic measurement of radioactivity following requirements of the French health ministry (Circulaire du 13/06/2007) regarding the monitoring and management of sanitary risk linked to the presence of radionuclides in drinking waters (natural mineral waters excepted). - systematic uranium mass concentration determination; - a few radon-222 gas measurements for waters in glass bottles. This study is a flash assessment of radiological characteristics of French bottled waters, at the analysis date for the sample received. It was done in informative way and was not done for regulatory control purposes.. This study has shown that: - all bottled waters analyzed have a tritium activity concentration lower than the quality reference value of 100 Bq/l of the French regulation; - More than 105 bottled waters analyzed (80% of the springs waters and 70% of natural mineral waters received) have a gross alpha activity concentration lower than the guideline value of 0,1 Bq/l of the French regulation; - All bottled waters analyzed have a residual gross beta activity concentration lower than the guideline value of 1 Bq/l of the French regulation; - All bottled waters analyzed have a uranium mass concentration lower than the provisory guideline value of 30 μg/l of the WHO for drinking waters; - radon-222 was only significantly measured once upon 6 glass bottled waters with a value far below the reference value of 100 Bq/l of the future European Directive on drinking waters. For 32 bottled waters with gross alpha

  18. Discovery Bottles: A Unique Inexpensive Tool for the K-2 Science Classroom

    Science.gov (United States)

    Watson, Sandy

    2008-01-01

    Discover discovery bottles! These wide-mouth plastic containers of any size filled with objects of different kinds can be terrific tools for science explorations and a great way to cultivate science minds in a K-2 science classroom. In addition, the author has found them to be a useful, inexpensive, and engaging way to help students develop skills…

  19. 21 CFR 165.110 - Bottled water.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Bottled water. 165.110 Section 165.110 Food and... CONSUMPTION BEVERAGES Requirements for Specific Standardized Beverages § 165.110 Bottled water. (a) Identity—(1) Description. Bottled water is water that is intended for human consumption and that is sealed...

  20. 27 CFR 31.232 - Wine bottling.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Wine bottling. 31.232... OF THE TREASURY LIQUORS ALCOHOL BEVERAGE DEALERS Miscellaneous § 31.232 Wine bottling. Each person desiring to bottle, package, or repackage taxpaid wines must, before carrying on those operations,...

  1. Quality comparison of tap water vs. bottled water in the industrial city of Yanbu (Saudi Arabia).

    Science.gov (United States)

    Ahmad, Maqbool; Bajahlan, Ahmad S

    2009-12-01

    This study was conducted to compare the quality of bottled water with potabilized desalinated tap water. Fourteen brands of local and imported bottled water samples were collected from the local market and analyzed for physicochemical parameters in the Royal Commission Environmental Laboratory. Results were compared with 5-year continuous monitoring data of tap water from different locations in Madinat Yanbu Al-Sinaiyah (MYAS) including storage tanks of desalination plant. Results show that there was no significant difference in the quality of tap water and bottled water. Bacteriological test was never found positive in the 5-year data in tap water. Similarly, physicochemical analysis shows the persistent quality of tap water. Based on hardness analysis, bottled and tap water are categorized as soft water. Trihalomethanes (THMs) study also indicates that traces of disinfection by products (DBPs) are present in both tap and bottled water and are much less than the World Health Organization and Environmental Protection Agency maximum permissible limits. It is also important to note that the tap water distribution network in MAYS is a high-pressure recirculation network and there is no chance to grow bacteria in stagnant water in pipe lines or houses. Recently, the Royal Commission has replaced the whole drinking water network, which was made of asbestos-cemented pipes with glass-reinforced plastic (GRP) pipes, to avoid any asbestos contaminations. Based on these results, it is concluded that drinking water distributed in the city is of very good and persistent quality, comparable with bottled water. Continuous monitoring also guarantees the safe drinking water to the community. Hence, it is the responsibility of the Royal Commission to encourage the peoples in the city to drink tap water as it is as good as bottled water even better than some of the brands and is monitored regularly. It is also much cheaper compared to bottled water and is available round the clock

  2. Generating Squeezed States in Solid State Circuits

    Institute of Scientific and Technical Information of China (English)

    REN Xin-An; WEN Yi-Huo; ZHANG Li-You; LONG Gui-Lu

    2008-01-01

    We propose a scheme for generating squeezed states in solid state circuits which consist a superconducting transmission line resonator (STLR), a superconducting Cooper-pair box (CPB) and a nanoelectromechanical resonator (NMR). The nonlinear interaction between the STLR and the CPB can be implemented by setting the external biased flux of the CPB at some certain points. The interaction Hamiltonian between the STLR and the NMR is derived by performing Fr 5hlich transformation on the total Hamiltonian of the combined system. Just by adiabatically keeping the CPB at the ground state, we get the standard parametric down-conversion Hamiltonian, and the squeezed states of the STLR can be easily generated, which is similar to the three-wave mixing in quantum optics.

  3. Squeezing and Entanglement in Continuous Variable Systems

    Institute of Scientific and Technical Information of China (English)

    XIA Yun-Jie; GUO Guang-Can

    2004-01-01

    Based on total variance of a pair of Einstein-Podolsky-Rosen (EPR) type operators, the generalized EPR entangled states in continuous variable systems are defined. We show that such entangled states must correspond to two-mode squeezing states whether these states are Gaussian or not and whether they are pure or not. With help of the relation between the total variance and the entanglement, the degree of such entanglement is also defined. Through analysing some specific cases, we see that this method is very convenient and easy in practical applications. In addition, an entangled state with no squeezing is studied, which reveals that there certainly exists something unknown about entanglement in continuous variable systems.

  4. Limits to squeezing in the degenerate OPO

    CERN Document Server

    Chaturvedi, S; Drummond, P D

    2001-01-01

    We develop a systematic theory of quantum fluctuations in the driven parametric oscillator (OPO), including the region near threshold. This allows us to treat the limits imposed by nonlinearities to quantum squeezing and noise reduction, in this non-equilibrium quantum phase-transition. In particular, we compute the squeezing spectrum near threshold, and calculate the optimum value. We find that the optimal noise reduction occurs at different driving fields, depending on the ratio of damping rates. The largest spectral noise reductions are predicted to occur with a very high-Q second-harmonic cavity. Our analytic results agree well with stochastic numerical simulations. We also compare the results obtained in the positive-P representation, as a fully quantum mechanical calculation, with the truncated Wigner phase space equation, also known as semiclassical theory.

  5. Adaptive phase estimation with squeezed thermal light

    DEFF Research Database (Denmark)

    Berni, A. A.; Madsen, Lars Skovgaard; Lassen, Mikael Østergaard

    2013-01-01

    Summary form only given. The use of quantum states of light in optical interferometry improves the precision in the estimation of a phase shift, paving the way for applications in quantum metrology, computation and cryptography. Sub-shot noise phase sensing can for example be achieved by injecting...... a squeezed vacuum into an interferometer . However, this approach leads to enhanced sensitivity only for small phase shifts. In this work we aim for ab initio sub-shot noise estimation of an unknown phase shift using a pre-determined squeezed probe and an adaptive measurement approach. We experimentally...... with the signal. A second estimation step leads to the final estimation of the phase shift. Thermalization of the probe state prevents the attainability of the quantum Cramér-Rao bound. Nevertheless, we show that the studied adaptive scheme still saturates the classical Cramér-Rao bound, showing sub-shot noise...

  6. Squeeze Casting of Semiolid A356 Alloy

    Directory of Open Access Journals (Sweden)

    Xiang-Jie Yang

    2014-05-01

    Full Text Available The rheo-squeeze casting (rheo-SQC combining the rheocasting and the SQC was developed, in which semisolid slurry was produced by the low superheat pouring with a shearing field (LSPSF process. The three-dimensional morphology of the primary α-Al phase and the rest spacing of slurry prepared by LSPSF process have been reconstructed and visualized, and the microstructures of squeeze cast A356 alloy have been obtained. Based on the three-dimensional microstructure reconstructed, their three-dimensional characterizations such as solid volume fraction and equivalent diameter of the extracted primary α-Al phase of the slurry were measured and calculated. And the microstructures of cross-section of squeeze cast product were investigated. Compared and analyzed the typical microstructure characteristics of parts in different positions produced by SQC and rheo-SQC, the results show that the primary α-Al phase was in the form of enriched dendrites across the whole section of parts produced by SQC. Nevertheless, in the relative case of the rheo-SQC, the whole formations of dendrites have been inhibited effectively, revealing a conspicuous modification in morphology and refinement of the primary α-Al phase. In addition, the solid fraction decreased from the centre to the verge of products along the slurry flow orientation.

  7. Observation of Localized Multi-Spatial-Mode Quadrature Squeezing

    Directory of Open Access Journals (Sweden)

    C. S. Embrey

    2015-07-01

    Full Text Available Quantum states of light can improve imaging whenever the image quality and resolution are limited by the quantum noise of the illumination. In the case of a bright illumination, quantum enhancement is obtained for a light field composed of many squeezed transverse modes. A possible realization of such a multi-spatial-mode squeezed state is a field which contains a transverse plane in which the local electric field displays reduced quantum fluctuations at all locations, on any one quadrature. Using a traveling-wave amplifier, we have generated a multi-spatial-mode squeezed state and showed that it exhibits localized quadrature squeezing at any point of its transverse profile, in regions much smaller than its size. We observe 75 independently squeezed regions. The amplification relies on nondegenerate four-wave mixing in a hot vapor and produces a bichromatic squeezed state. The result confirms the potential of this technique for producing illumination suitable for practical quantum imaging.

  8. Properties of squeezing functions and geometry of bounded domains

    CERN Document Server

    Deng, Fusheng; Zhang, Liyou

    2012-01-01

    In this article we continue the study of properties of squeezing functions and geometry of bounded domains. The limit of squeezing functions of a sequence of bounded domains is studied. We give comparisons of intrinsic positive forms and metrics on bounded domains in terms of squeezing functions. To study the boundary behavior of squeezing functions, we introduce the notions of (intrinsic) ball pinching radius, and give boundary estimate of squeezing functions in terms of these datum. Finally, we use these results to study geometric and analytic properties of some interesting domains, including planar domains, Cartan-Hartogs domains, and a strongly pseudoconvex Reinhardt domain which is not convex. As a corollary, all Cartan-Hartogs domains are homogenous regular, i.e., their squeezing functions admit positive lower bounds.

  9. Complex Squeezing and Force Measurement Beyond the Standard Quantum Limit.

    Science.gov (United States)

    Buchmann, L F; Schreppler, S; Kohler, J; Spethmann, N; Stamper-Kurn, D M

    2016-07-15

    A continuous quantum field, such as a propagating beam of light, may be characterized by a squeezing spectrum that is inhomogeneous in frequency. We point out that homodyne detectors, which are commonly employed to detect quantum squeezing, are blind to squeezing spectra in which the correlation between amplitude and phase fluctuations is complex. We find theoretically that such complex squeezing is a component of ponderomotive squeezing of light through cavity optomechanics. We propose a detection scheme called synodyne detection, which reveals complex squeezing and allows the accounting of measurement backaction. Even with the optomechanical system subject to continuous measurement, such detection allows the measurement of one component of an external force with sensitivity only limited by the mechanical oscillator's thermal occupation.

  10. Squeezing and entanglement in multi-qutrit systems

    Science.gov (United States)

    Naji, Azita; Jafarpour, Mojtaba

    2013-08-01

    We study squeezing and bipartite entanglement in a multi-qutrit system initially in a coherent state, initiated by the two-axis counter-twisting Hamiltonian in the presence and also absence of a magnetic field. We start with an initial coherent state which is neither squeezed nor entangled; however, it gains both properties as it is evolved by the Hamiltonian. Both squeezing and entanglement show an oscillatory behavior in time and stronger Hamiltonians correspond to smaller oscillation periods. Generation of almost continuous squeezing according to Kitagawa criterion seems feasible; however, off and on squeezing death is observed according to that of Wineland. The entanglement is diminished as the size of the system is increased, implying that the generation of strong entanglement in large multi-qutrit systems, instigated by the counter-twisting Hamiltonian, may not be feasible. Application of a magnetic field may have adverse effect on both squeezing and entanglement.

  11. Experimental Realization of a Thermal Squeezed State of Levitated Optomechanics

    Science.gov (United States)

    Rashid, Muddassar; Tufarelli, Tommaso; Bateman, James; Vovrosh, Jamie; Hempston, David; Kim, M. S.; Ulbricht, Hendrik

    2016-12-01

    We experimentally squeeze the thermal motional state of an optically levitated nanosphere by fast switching between two trapping frequencies. The measured phase-space distribution of the center of mass of our particle shows the typical shape of a squeezed thermal state, from which we infer up to 2.7 dB of squeezing along one motional direction. In these experiments the average thermal occupancy is high and, even after squeezing, the motional state remains in the remit of classical statistical mechanics. Nevertheless, we argue that the manipulation scheme described here could be used to achieve squeezing in the quantum regime if preceded by cooling of the levitated mechanical oscillator. Additionally, a higher degree of squeezing could, in principle, be achieved by repeating the frequency-switching protocol multiple times.

  12. Generalised squeezing and information theory approach to quantum entanglement

    Science.gov (United States)

    Vourdas, A.

    1993-01-01

    It is shown that the usual one- and two-mode squeezing are based on reducible representations of the SU(1,1) group. Generalized squeezing is introduced with the use of different SU(1,1) rotations on each irreducible sector. Two-mode squeezing entangles the modes and information theory methods are used to study this entanglement. The entanglement of three modes is also studied with the use of the strong subadditivity property of the entropy.

  13. On the realization of atomic dipole squeezing by remote manipulation

    Institute of Scientific and Technical Information of China (English)

    XIANG Shao-hua; SONG Ke-hui

    2004-01-01

    A scheme for adjusting the dipole squeezing properties of one atom at one place by manipulating and detecting another atom at the remote place is proposed, in which these atoms initially in the spatially separated entangled state act as a quantum channel carrying quantum information. The result shows that the dipole squeezing properties of one atom can be adjusted by rotating and detecting the other, and the maximal atomic squeezing can be obtained under local operation and classical communication.

  14. Quantum electrodynamics in the squeezed vacuum state Electron mass shift

    CERN Document Server

    Putz, V; Putz, Volkmar; Svozil, Karl

    2001-01-01

    Due to the nonvanishing average photon population of the squeezed vacuum state, finite corrections to the scattering matrix are obtained. The lowest order contribution to the electron mass shift for a one mode squeezed vacuum state is given by $\\delta m(\\Omega, s)/m=\\alpha (2/\\pi)(\\Omega /m)^2\\sinh^2(s)$, where $\\Omega$ and $s$ stand for the mode frequency and the squeeze parameter and $\\alpha$ for the fine structure constant, respectively.

  15. Distillation of the two-mode squeezed state.

    Science.gov (United States)

    Kurochkin, Yury; Prasad, Adarsh S; Lvovsky, A I

    2014-02-21

    We experimentally demonstrate entanglement distillation of the two-mode squeezed state obtained by parametric down-conversion. Applying the photon annihilation operator to both modes, we raise the fraction of the photon-pair component in the state, resulting in the increase of both squeezing and entanglement by about 50%. Because of the low amount of initial squeezing, the distilled state does not experience significant loss of Gaussian character.

  16. Simulations and experiments on polarization squeezing in optical fiber

    DEFF Research Database (Denmark)

    Corney, J.F.; Heersink, J.; Dong, R.;

    2008-01-01

    We investigate polarization squeezing of ultrashort pulses in optical fiber, over a wide range of input energies and fiber lengths. Comparisons are made between experimental data and quantum dynamical simulations to find good quantitative agreement. The numerical calculations, performed using both...... effects cause a marked deterioration of squeezing at higher energies and longer fiber lengths. We also calculate the optimum fiber length for maximum squeezing....

  17. Squeezed state generation for interferometric gravitational-wave detection

    Energy Technology Data Exchange (ETDEWEB)

    McKenzie, Kirk; Gray, Malcolm B; Gossler, Stefan; Lam, Ping Koy; McClelland, David E [Center for Gravitational Physics, Department of Physics, Faculty of Science, Australian National University, ACT 0200 (Australia)

    2006-04-21

    In this paper we present results demonstrating the development of a squeezed state at sideband frequencies as low as 100 Hz. The squeezed source was generated in a doubly resonant optical parametric oscillator (OPO) operated below threshold. The OPO resonance condition is achieved using the pump field, allowing the OPO to produce a squeezed vacuum state stably. We describe limitations to the experiment and discuss future work.

  18. On the squeezed number states and their phase space representations

    Energy Technology Data Exchange (ETDEWEB)

    Albano, L [Universidad Simon Bolivar, Departamento de Fisica, Apartado Postal 89000, Caracas 1080-A (Venezuela); Mundarain, D F [Universidad Simon Bolivar, Departamento de Fisica, Apartado Postal 89000, Caracas 1080-A (Venezuela); Stephany, J [Universidad Simon Bolivar, Departamento de Fisica, Apartado Postal 89000, Caracas 1080-A (Venezuela)

    2002-10-01

    We compute the photon-number distribution, the Q({alpha}) distribution function and the wavefunctions in the momentum and position representation for a single mode squeezed number state using generating functions which allow one to obtain any matrix element in the squeezed number state representation from the matrix elements in the squeezed coherent state representation. For highly squeezed number states we discuss the previously unnoted oscillations which appear in the Q({alpha}) function. We also note that these oscillations can be related to the photon-number distribution oscillations and to the momentum representation of the wavefunction.

  19. Study on heat treatment blister of squeeze casting parts

    Institute of Scientific and Technical Information of China (English)

    TONG Wen-jun; QI Lin; QI Pi-xiang

    2007-01-01

    Heat treatment blister is one of the common defects found in squeeze casting parts, which is related to squeeze mode, process and mold. For direct squeeze-casting parts, solution heat treatment can be performed smoothly as long as oil-based paint is not used and air exhaust is well arranged. For indirect squeeze casting parts,solution heat treatment can also be applied when additional factors are taken into consideration, including well designed internal feeding system and strictly controlled liquid metal filling velocity to prevent from inclusions.

  20. Hybrid squeezing of solitonic resonant radiation in photonic crystal fibers

    CERN Document Server

    Tran, Truong X; Soeller, Christoph; Blow, Keith J; Biancalana, Fabio

    2011-01-01

    We report on the existence of a novel kind of squeezing in photonic crystal fibers which is conceptually intermediate between the four-wave mixing induced squeezing, in which all the participant waves are monochromatic waves, and the self-phase modulation induced squeezing for a single pulse in a coherent state. This hybrid squeezing occurs when an arbitrary short soliton emits quasi-monochromatic resonant radiation near a zero group velocity dispersion point of the fiber. Photons around the resonant frequency become strongly correlated due to the presence of the classical soliton, and a reduction of the quantum noise below the shot noise level is predicted.

  1. The properties of squeezed optical states created in lossy cavities

    CERN Document Server

    Seifoory, Hossein; Dignam, Marc M; Sipe, J E

    2016-01-01

    We investigate theoretically the properties of squeezed states generated using degenerate parametric down conversion in lossy cavities. We show that the Lindblad master equation, which governs the evolution of this system, has as its solution a squeezed thermal state with an effective temperature and squeezing parameter that depends on time. We derive analytical solutions for the time-evolution of quadrature noise, thermal photon number, squeezing parameter, and total photon number under different pumping regimes. We also find the steady state limits of the quadrature noises and discuss the $ g^{(2)} $ factor of the generated light inside the cavity in the steady state.

  2. Triple-mode squeezing with dressed six-wave mixing.

    Science.gov (United States)

    Wen, Feng; Li, Zepei; Zhang, Yiqi; Gao, Hong; Che, Junling; Che, Junling; Abdulkhaleq, Hasan; Zhang, Yanpeng; Wang, Hongxing

    2016-05-12

    The theory of proof-of-principle triple-mode squeezing is proposed via spontaneous parametric six-wave mixing process in an atomic-cavity coupled system. Special attention is focused on the role of dressed state and nonlinear gain on triple-mode squeezing process. Using the dressed state theory, we find that optical squeezing and Autler-Towns splitting of cavity mode can be realized with nonlinear gain, while the efficiency and the location of maximum squeezing point can be effectively shaped by dressed state in atomic ensemble. Our proposal can find applications in multi-channel communication and multi-channel quantum imaging.

  3. Plastic Surgery

    Science.gov (United States)

    ... Surgery? A Week of Healthy Breakfasts Shyness Plastic Surgery KidsHealth > For Teens > Plastic Surgery Print A A ... forehead lightened with a laser? What Is Plastic Surgery? Just because the name includes the word "plastic" ...

  4. Effects of Water Bottle Materials and Filtration on Bisphenol A Content in Laboratory Animal Drinking Water.

    Science.gov (United States)

    Honeycutt, Jennifer A; Nguyen, Jenny Q T; Kentner, Amanda C; Brenhouse, Heather C

    2017-05-01

    Bisphenol A (BPA) is widely used in the polycarbonate plastics and epoxy resins that are found in laboratory animal husbandry materials including cages and water bottles. Concerns about BPA exposure in humans has led to investigations that suggest physiologic health risks including disruptions to the endocrine system and CNS. However, the extent of exposure of laboratory animals to BPA in drinking water is unclear. In the first study, we compared the amount of BPA contamination in water stored in plastic bottles used in research settings with that in glass bottles. The amount of BPA that leached into water was measured across several time points ranging from 24 to 96 h by using a BPA ELISA assay. The results showed that considerable amounts of BPA (approximately 0.15 μg/L) leached from polycarbonate bottles within the first 24 h of storage. In the second study, BPA levels were measured directly from water taken from filtered compared with unfiltered taps. We observed significantly higher BPA levels in water from unfiltered taps (approximately 0.40 μg/L) compared with taps with filtration systems (approximately 0.04 μg/L). Taken together, our findings indicate that the use of different types of water bottles and water sources, combined with the use of different laboratory products (food, caging systems) between laboratories, likely contribute to decreased rigor and reproducibility in research. We suggest that researchers consider reporting the types of water bottles used and that animal care facilities educate staff regarding the importance of flushing nonfiltered water taps when filling animal water bottles.

  5. Qualitative Assessment Of Bottled Water In The Middle East

    OpenAIRE

    Ahmad, S.; Saleem, Abdul

    1996-01-01

    Many brands of bottled water are being produced in the Middle East including the Gulf Cooperation Council (GCC) countries. Over fourteen brands of bottled water could be found in the market of Doha. Use of bottled water has kept on increasing in this region. Reasons for the increase in use of bottled water for drinking have been discussed. The raw water source for the bottled water is groundwater. Most of the manufacturers of the bottled water claim bottled water as "Natural Mineral Water...

  6. Migration of plasticizers phthalates, bisphenol A and alkylphenols from plastic containers and evaluation of risk.

    Science.gov (United States)

    Guart, A; Bono-Blay, F; Borrell, A; Lacorte, S

    2011-05-01

    This study investigates the potential migration of plasticisers, plastic components and additives from several plastic water bottles. Compounds studied were phthalates (dimethyl phthalate, di-n-butyl phthalate, benzylbutyl phthalate, bis(2-ethylhexyl) phthalate), bis(2-ethylhexyl) adipate, octylphenol, 4-nonylphenol and bisphenol A. Polycarbonate (PC), high-density polyethylene (HDPE), low-density polyethylene (LDPE), polyethylene terephthalate (PET) and polystyrene (PS) plastics used in the water bottling sector were tested using three kinds of total or specific migration tests: (1) standard method UNE-EN ISO 177; (2) ultrasonic forced extraction; and (3) standard method UNE-EN 13130-1. In addition, bottled waters contained in different plastic materials were analysed to determine the potential migration of target compounds in real conditions. In all cases, samples were solid-phase extracted using Oasis HLB 200 mg cartridges and analysed using GC-MS in scan-acquisition mode. Bisphenol A and 4-nonylphenol were detected in incubated samples, indicating that migration from food plastics can occur at the experimental conditions tested. The total daily intake was calculated according to the levels detected in bottled water and the assessment of the consumers' risk was evaluated taking into consideration toxicological and legislative values.

  7. Application of silicone based elastomers for manufacturing of Green Fiber Bottle

    DEFF Research Database (Denmark)

    Saxena, Prateek; Bissacco, Giuliano

    Due to ever-increasing demand of sustainable products, eco-friendly packaging solutions are finding their importance in the paper packaging industry. Green Fiber Bottle (GFB) is an alternative to plastic, glass and metal based packaging for beverages. The tool concept for manufacturing of paper...... bottle uses a silicone based elastomer as the core. The expansion of core in the tool resists shrinkage of paper during drying as well as helps in obtaining good fiber compaction. The feasibility of the tool concept in the production of GFB is discussed in this work....

  8. Novel Gas Barrier SiOC Coating to PET Bottles through a Hot Wire CVD Method

    Directory of Open Access Journals (Sweden)

    Masaki Nakaya

    2016-01-01

    Full Text Available In an attempt to enhance the gas barrier enhancement of plastic containers such as poly(ethylene terephthalate bottles, a novel method was found using a hot wire CVD technique, where tantalum wire is heated and exposed to a gas flow of vinyl silane. The resultant SiOC thin film was confirmed to characteristically contain Si-Si bonds in its surface and demonstrate a remarkably and highly practical decrease of the permeation of various gas through poly(ethylene terephthalate bottles.

  9. Squeezing-enhanced optomechanical transduction sensitivity

    DEFF Research Database (Denmark)

    Hoff, Ulrich Busk; Harris, Glen I.; Madsen, Lars Skovgaard;

    2013-01-01

    High-sensitivity interferometric detection of mechanical displacements has received much attention over the past decades, due to its vast field of applicability, e.g. in gravitational wave detection, cantilever-based single spin detection, and the quest to reveal quantum effects in mesoscopic...... mechanical systems. Following the proposal of Caves we have experimentally proven the applicability of squeezed light-enhanced interferometric displacement detection in the domain of micromechanical oscillators. The technique has previously been demonstrated for table-top interferometer setups and GW...

  10. MHD squeezing flow between two infinite plates

    Directory of Open Access Journals (Sweden)

    Umar Khan

    2014-03-01

    Full Text Available Magneto hydrodynamic (MHD squeezing flow of a viscous fluid has been discussed. Conservation laws combined with similarity transformations have been used to formulate the flow mathematically that leads to a highly nonlinear ordinary differential equation. Analytical solution to the resulting differential equation is determined by employing Variation of Parameters Method (VPM. Runge–Kutta order-4 method is also used to solve the same problem for the sake of comparison. It is found that solution using VPM reduces the computational work yet maintains a very high level of accuracy. The influence of different parameters is also discussed and demonstrated graphically.

  11. Experimental Demonstration of Squeezed State Quantum Averaging

    CERN Document Server

    Lassen, Mikael; Sabuncu, Metin; Filip, Radim; Andersen, Ulrik L

    2010-01-01

    We propose and experimentally demonstrate a universal quantum averaging process implementing the harmonic mean of quadrature variances. The harmonic mean protocol can be used to efficiently stabilize a set of fragile squeezed light sources with statistically fluctuating noise levels. The averaged variances are prepared probabilistically by means of linear optical interference and measurement induced conditioning. We verify that the implemented harmonic mean outperforms the standard arithmetic mean strategy. The effect of quantum averaging is experimentally tested both for uncorrelated and partially correlated noise sources with sub-Poissonian shot noise or super-Poissonian shot noise characteristics.

  12. Squeezed Wave Packets in Quantum Cosmology

    Science.gov (United States)

    Pedram, Pouria

    2010-11-01

    We use an appropriate initial condition for constructing squeezed wave packets in the context of Wheeler-DeWitt equation with complete classical description. This choice of initial condition does not alter the classical paths and only affect the quantum mechanical picture. To demonstrate the method, we consider an empty 4+1-dimensional Kaluza-Klein quantum cosmology in the presence of a negative cosmological constant. We show that these wave packets do not disperse and sharply peak on the classical trajectories in the whole configuration space. So, the probability of finding the corresponding physical quantities approaches zero everywhere except on the classical paths.

  13. Oscillatory squeeze flow for the study of linear viscoelastic behavior

    DEFF Research Database (Denmark)

    Wingstrand, Sara Lindeblad; Alvarez, Nicolas J.; Hassager, Ole

    2016-01-01

    The squeezing of a sample between parallel plates has been used for many years to characterize the rheological behavior of soft, purely viscous materials, and in recent times, small-amplitude oscillatory squeezing has been proposed as a means to determine the linear viscoelastic properties of mol...

  14. Critical Petermann K factor for intensity noise squeezing

    NARCIS (Netherlands)

    van der Lee, A.M.; van Druten, N.J.; van Exter, M.P.; Woerdman, J.P.; Poizat, J.P.; Grangier, P.

    2000-01-01

    We investigate the impact of the Petermann-excess-noise factor K >= 1 on the possibility of intensity noise squeezing of laser light below the standard quantum limit. Using an N-mode model, we show that squeezing is limited to a floor level of 2(K-1) times the shot noise limit. Thus, even a modest P

  15. Entanglement bounds for squeezed non-symmetric thermal state

    CERN Document Server

    Jiang, L

    2003-01-01

    I study the three parameters bipartite quantum Gaussian state called squeezed asymmetric thermal state, calculate Gaussian entanglement of formation analytically and the up bound of relative entropy of entanglement, compare them with coherent information of the state. Based on the result obtained, it is anticipated that hashing inequality is not violated for squeezed non-symmetric thermal state.

  16. Spin-Squeezing Entanglement of Second-Harmonic Generation

    Science.gov (United States)

    Shu, Jian

    2016-10-01

    An experimentally feasible scheme for generating spin-squeezing entanglement via second-harmonic generation was presented. Its shown that spin-squeezing entanglement can be generated rapidly in the dynamical process by adjusting coupling constant, detuning, the total number of particles and the evolution time.

  17. Physical Activity Benefits Creativity: Squeezing a Ball for Enhancing Creativity

    Science.gov (United States)

    Kim, JongHan

    2015-01-01

    Studies in embodied cognition show that physical sensations, such as touch and movement, influence cognitive processes. Two studies were conducted to test whether squeezing a soft versus a hard ball facilitates different types of creativity. Squeezing a malleable ball would increase divergent creativity by catalyzing multiple or alternative ideas,…

  18. Enforcing Margin Squeeze Ex Post Across Converging Telecommunications Markets

    DEFF Research Database (Denmark)

    Bergqvist, Christian; Townsend, John

    A margin squeeze is an exclusionary abuse which occurs when a vertically Integrated telecoms operator creates a disparity between upstream and downstream prices with the intention of squeezing an access competitor’s profits. The purpose of such pricing is either to increase the latter’s entry cos...

  19. Experimental Realisation of a Thermal Squeezed State of Levitated Optomechanics

    CERN Document Server

    Rashid, Muddassar; Bateman, James; Vovrosh, Jamie; Hempston, David; Kim, M S; Ulbricht, Hendrik

    2016-01-01

    We experimentally squeeze the thermal motional state of an optically levitated nanosphere, by fast switching between two trapping frequencies. The measured phase space distribution of our particle shows the typical shape of a squeezed thermal state, from which we infer up to 2.7dB of squeezing along one motional direction. The experiment features a large number of thermal excitations, therefore remaining in the classical regime. Nevertheless, we argue that the manipulation scheme described here could be used to achieve squeezing below the zero-point level, if preceded by ground state cooling of the levitated mechanical oscillator. Additionally, a higher degree of squeezing could in principle be achieved by repeating the frequency-switching protocol multiple times.

  20. Resonance Fluorescence from an Artificial Atom in Squeezed Vacuum

    Directory of Open Access Journals (Sweden)

    D. M. Toyli

    2016-07-01

    Full Text Available We present an experimental realization of resonance fluorescence in squeezed vacuum. We strongly couple microwave-frequency squeezed light to a superconducting artificial atom and detect the resulting fluorescence with high resolution enabled by a broadband traveling-wave parametric amplifier. We investigate the fluorescence spectra in the weak and strong driving regimes, observing up to 3.1 dB of reduction of the fluorescence linewidth below the ordinary vacuum level and a dramatic dependence of the Mollow triplet spectrum on the relative phase of the driving and squeezed vacuum fields. Our results are in excellent agreement with predictions for spectra produced by a two-level atom in squeezed vacuum [Phys. Rev. Lett. 58, 2539 (1987], demonstrating that resonance fluorescence offers a resource-efficient means to characterize squeezing in cryogenic environments.

  1. Teleporting squeezing: Optimization using non-Gaussian resources

    CERN Document Server

    Dell'Anno, F; Adesso, G; Illuminati, F

    2010-01-01

    We study the continuous-variable quantum teleportation of states, statistical moments of observables, and scale parameters such as squeezing. We investigate the problem both in ideal and imperfect Vaidman-Braunstein-Kimble protocol setups. We show how the teleportation fidelity is maximized and the difference between output and input variances is minimized by using suitably optimized entangled resources. Specifically, we consider the teleportation of coherent squeezed states, exploiting squeezed Bell states as entangled resources. This class of non-Gaussian states includes photon-added and photon-subtracted squeezed states as special cases. At variance with the case of entangled Gaussian resources, the use of entangled non-Gaussian squeezed Bell resources allows for different optimization procedures that lead to inequivalent results. Performing two independent optimization procedures one can either maximize the state teleportation fidelity, or minimize the difference between input and output quadrature varian...

  2. Quantum Harmonic Oscillator State Control in a Squeezed Fock Basis

    Science.gov (United States)

    Kienzler, D.; Lo, H.-Y.; Negnevitsky, V.; Flühmann, C.; Marinelli, M.; Home, J. P.

    2017-07-01

    We demonstrate control of a trapped-ion quantum harmonic oscillator in a squeezed Fock state basis, using engineered Hamiltonians analogous to the Jaynes-Cummings and anti-Jaynes-Cummings forms. We demonstrate that for squeezed Fock states with low n the engineered Hamiltonians reproduce the √{n } scaling of the matrix elements which is typical of Jaynes-Cummings physics, and also examine deviations due to the finite wavelength of our control fields. Starting from a squeezed vacuum state, we apply sequences of alternating transfer pulses which allow us to climb the squeezed Fock state ladder, creating states up to excitations of n =6 with up to 8.7 dB of squeezing, as well as demonstrating superpositions of these states. These techniques offer access to new sets of states of the harmonic oscillator which may be applicable for precision metrology or quantum information science.

  3. Nth-powered amplitude squeezing in fan-states

    CERN Document Server

    Duc, T M

    2002-01-01

    Squeezing properties of the Hillery-type N-powered amplitude are investigated in the fan-state vertical bar xi; 2k, f> sub F which is linearly superposed by 2k 2k-quantum nonlinear coherent states in the phase-locked manner. The general expression of squeezing is derived analytically for arbitrary xi, k, N and f showing a multi-directional character of squeezing. For a given k, squeezing may appear to the even power N=2k if f ident to 1 and N>=2k if f not =1 and the number of directions along with the Nth-powered amplitude is squeezed is exactly equal to N, for both f ident to 1 (the light field) and f not =1 (the vibrational motion of the trapped ion). Discussions are also given elucidating the qualitative difference between the cases of f ident to 1 and f not =1.

  4. Magnetorheological Damper Working in Squeeze Mode

    Directory of Open Access Journals (Sweden)

    Xinglong Gong

    2014-05-01

    Full Text Available This research is focused on evaluation of the magnetorheological fluids (MRFs based damper which works in squeeze mode. The operation direction of this damper is parallel to the direction of the external magnetic field. Before testing, commercial software ANSYS was used to analyze the magnetic field distribution inside the damper generated by charging current in the coil. The performance of the damper was tested by using the MTS809 (produced by MTS Systems Corporation, USA. For simulation of this damper, a mathematical model was set up. Experimental results showed that the small squeezed MR damper could produce large damping force; for example, the maximum damping force is nearly 6 kN, while the amplitude is 1.2 mm, the frequency is 1.0 Hz, and the current is 2.0 A, and the damping force was controllable by changing the current in the coil. The damping force versus displacement curves are complex. We divide them into four regions for simulation. The maximum damper force increased quickly with the increasing of the current in coil. This kind of damper can be used in vibration isolation for precise equipment.

  5. Controllable hybrid shape of correlation and squeezing

    Science.gov (United States)

    Abdisa, Garuma; Ahmed, Irfan; Wang, Xiuxiu; Liu, Zongchen; Wang, Hongxing; Zhang, Yanpeng

    2016-08-01

    Two- and three-mode correlation and squeezing of spontaneous parametric four-wave mixing (SPFWM) and fourth-order fluorescence (FL) composite signals are investigated theoretically and experimentally in both homonuclear (two-level) and heteronuclearlike (V-type level) molecular systems of P r3 + :YSO. By selecting different time positions, changing the power, and changing the frequency detuning of the laser field, the competition between the composite signals is demonstrated. It is found that as the laser parameters change, the signal evolves from a nonlinear χ(4 ) process resulting in a FL signal to a SPFWM signal (χ(3 ) process). In addition, the competition effect between the signals determines the evolution of the shape of the correlation from a pure sharp to a two-stage (mixed) shape and finally to a pure broad peak amplitude. Furthermore, the signal evolution determines the magnitude of squeezing, which can control the noise level. Such progress may find potential applications in optical hybrid communication and information processing.

  6. Partial squeeze film levitation modulates fingertip friction.

    Science.gov (United States)

    Wiertlewski, Michaël; Fenton Friesen, Rebecca; Colgate, J Edward

    2016-08-16

    When touched, a glass plate excited with ultrasonic transverse waves feels notably more slippery than it does at rest. To study this phenomenon, we use frustrated total internal reflection to image the asperities of the skin that are in intimate contact with a glass plate. We observed that the load at the interface is shared between the elastic compression of the asperities of the skin and a squeeze film of air. Stroboscopic investigation reveals that the time evolution of the interfacial gap is partially out of phase with the plate vibration. Taken together, these results suggest that the skin bounces against the vibrating plate but that the bounces are cushioned by a squeeze film of air that does not have time to escape the interfacial separation. This behavior results in dynamic levitation, in which the average number of asperities in intimate contact is reduced, thereby reducing friction. This improved understanding of the physics of friction reduction provides key guidelines for designing interfaces that can dynamically modulate friction with soft materials and biological tissues, such as human fingertips.

  7. Feeding Bottles Usage and the Prevalence of Childhood Allergy and Asthma

    DEFF Research Database (Denmark)

    Hsu, Nai-Yun; Wu, Pei-Chih; Bornehag, Carl-Gustaf

    2012-01-01

    infant formula or complementary foods, family history, parental educational levels, and smoking status, as well as the problem of indoor water damage. This study was the first to reveal the potential risk of using plastic consumer products such as feeding bottles on the reported health status......This study aimed to examine the association between the length of use of feeding bottles or pacifiers during childhood and the prevalence of respiratory and allergic morbidities. A large-scale questionnaire survey was performed in day care centers and kindergartens (with children's ages ranging...... from 2 to 7 years) in southern Taiwan, and a total of 14,862 questionnaires completed by parents were finally recruited for data analysis. Effects of using feeding bottles on children's wheezing/asthma (adjusted OR: 1.05, 95% CI 1.00-1.09), allergic rhinitis (adjusted OR: 1.04, 95% CI 1...

  8. Production of Squeezed State of Single Mode Cavity Field by the Coupling of Squeezed Vacunm Field Reservoir in Nonautonomous Case

    Institute of Scientific and Technical Information of China (English)

    安钧鸿; 王顺金; 罗洪刚; 贾成龙

    2004-01-01

    The dissipative and decoherence properties as well as the asymptotic behaviour of the single mode electromagnetic field interacting with the time-dependent squeezed vacuum field reservoir are investigated in detail by using the algebraic dynamical method. With the help of the left and right representations of the relevant hw( 4) algebra, the dynamical symmetry of the nonautonomous master equation of the system is found to be su(1, 1). The unique equilibrium steady solution is found to be the squeezed state and any initial state of the system is proven to approach the unique squeezed state asymptotically. Thus the squeezed vacuum field reservoir is found to play the role of a squeezing mold of the cavity field.

  9. Chemistry with Inexpensive Materials: Spray Bottles and Plastic Bags.

    Science.gov (United States)

    Zoltewicz, Susan

    1993-01-01

    Presents eight chemistry activities that are interesting and involve simple, easily available materials. Topics include mystery writing, valentine hearts, flame tests, evaporation race, buoyancy versus mass, determination of relative masses of gases, mole sample container, and cold and hot packs. (DDR)

  10. Critical petermann K factor for intensity noise squeezing

    Science.gov (United States)

    van Der Lee AM; van Druten NJ; van Exter MP; Woerdman; Poizat; Grangier

    2000-11-27

    We investigate the impact of the Petermann-excess-noise factor K>/=1 on the possibility of intensity noise squeezing of laser light below the standard quantum limit. Using an N-mode model, we show that squeezing is limited to a floor level of 2(K-1) times the shot noise limit. Thus, even a modest Petermann factor significantly impedes squeezing, which becomes impossible when K>/=1.5. This appears as a serious limitation for obtaining sub-shot-noise light from practical semiconductor lasers. We present experimental evidence for our theory.

  11. Direct Measurement of Squeezing in the Motion of Trapped Ions

    Institute of Scientific and Technical Information of China (English)

    ZENG Hao-Sheng; HU Ai-Qin; LIU Qiong; KUANG Le-Man

    2005-01-01

    @@ We present a simple method that can be used to directly measure the squeezing of the quantum motional states of a trapped ion.Through the use of the interaction between the trapped ion and classical lasers, one can design a required coupling between the internal electronic and external vibrational degrees of freedom of the ion and can transfer information of the expectation value of a vibrational operator to the atomic internal populations.Thus measurement of squeezing on the quantum motional state can directly be realized.By adjusting the phases of the interacting lasers, one can measure the squeezing of both position and momentum quadratures.

  12. Studying fluid squeeze characteristics for aerostatic journal bearing

    Energy Technology Data Exchange (ETDEWEB)

    Abdel-Rahman, Gamal M. [Department of Mathematics, Faculty of Science, Benha University, Benha 13518 (Egypt)], E-mail: gamalm60@yahoo.com

    2008-07-01

    The Reynolds equation for studying fluid squeeze of aerostatic journal bearing is solved numerically by considering the quasi-steady behavior of the air film. The radial displacement can influence the air film thickness modifying the pressure distribution in the journal-bearing gap. Also, the variations in the seal characteristics with eccentricity, time, squeeze number, length-to-diameter and supply pressure are presented. The numerical results for the squeeze load-carrying capacity are given in a non-dimensional for000.

  13. Bell operator and Gaussian squeezed states in noncommutative quantum mechanics

    CERN Document Server

    Bastos, Catarina; Bertolami, Orfeu; Dias, Nuno Costa; Prata, João Nuno

    2015-01-01

    One examines putative corrections to the Bell operator due to the noncommutativity in the phase-space. Starting from a Gaussian squeezed envelop whose time evolution is driven by commutative (standard quantum mechanics) and noncommutative dynamics respectively, one concludes that, although the time evolving covariance matrix in the noncommutative case is different from the standard case, the squeezing parameter dominates and there are no noticeable noncommutative corrections to the Bell operator. This indicates that, at least for squeezed states, the privileged states to test Bell correlations, noncommutativity versions of quantum mechnics remains as non-local as quantum mechanics itself.

  14. Bell operator and Gaussian squeezed states in noncommutative quantum mechanics

    Science.gov (United States)

    Bastos, Catarina; Bernardini, Alex E.; Bertolami, Orfeu; Dias, Nuno Costa; Prata, João Nuno

    2016-05-01

    We examine putative corrections to the Bell operator due to the noncommutativity in the phase space. Starting from a Gaussian squeezed envelope whose time evolution is driven by commutative (standard quantum mechanics) and noncommutative dynamics, respectively, we conclude that although the time-evolving covariance matrix in the noncommutative case is different from the standard case, the squeezing parameter dominates and there are no noticeable noncommutative corrections to the Bell operator. This indicates that, at least for squeezed states, the privileged states to test Bell correlations, noncommutativity versions of quantum mechanics remain as nonlocal as quantum mechanics itself.

  15. Preparation of entangled squeezed states and quantification of their entanglement

    Institute of Scientific and Technical Information of China (English)

    蔡新华; 匡乐满

    2002-01-01

    We propose a scheme for generating bipartite and multipartite entangled squeezed states via the Jaynes-Cummingsmodel with large detuning. Bipartite entanglement of these entangled states is quantified by the concurrence. We alsouse the N-tangle to compute multipartite entanglement of these multipartite entangled squeezed states. Finally wediscuss two limiting cases which arise from r → oo and r → 0, in which the multipartite entangled squeezed statereduces correspondingly into an N-qubit Greenberger-Horne-Zeilinger state and an N-qubit W state.

  16. The Achromatic Telescopic Squeezing (ATS) MD part III

    CERN Document Server

    Fartoukh, S; Goddard, B; Hofle, W; Jacquet, D; Kruk, G; Lamont, M; de Maria, R; Miyamoto, R; Mueller, G; Pojer, M; Ponce, L; Redaelli, S; Ryckx, N; Steinhagen, R; Strzelczyk, M; Vanbavinckhove, G; Wenninger, J

    2011-01-01

    This note highlights the results obtained during the third so-called ATS MD which took place in 2011. The goal of this MD was extremely challenging, targeting a pre-squeezed beta* of 40 cm in ATLAS and CMS, followed by a telescopic squeeze of these two insertions to finally reach a beta* of 10 cm both at IP1 and IP5. Due to the rather poor machine availability during the MD period, the time initially allocated to the ATS studies was hardly cut by a factor of 2, and "only" the achromatic pre-squeeze down to beta*=40 cm was demonstrated with beam.

  17. EXAMINATION OF BOTTLED WATER FOR NONTUBERCULOUS MYCOBACTERIA

    Science.gov (United States)

    The objective of this study was to examine bottled water for the presence of nontuberculous mycobacteria as a potential source of infection in AIDS patients. Twenty brands of bottled water commonly used in the Los Angeles area were tested for the presence of nontuberculous mycoba...

  18. Ponderomotive light squeezing with atomic cavity optomechanics

    CERN Document Server

    Brooks, Daniel W C; Brahms, Nathan; Purdy, Thomas P; Schreppler, Sydney; Stamper-Kurn, Dan M

    2011-01-01

    Accessing distinctly quantum aspects of the interaction between light and the position of a mechanical object has been an outstanding challenge to cavity-optomechanical systems. Only cold-atom implementations of cavity optomechanics have indicated effects of the quantum fluctuations in the optical radiation pressure force. Here we use such a system, in which quantum photon-number fluctuations significantly drive the center of mass of an atomic ensemble inside a Fabry-Perot cavity. We show that the optomechanical response both amplifies and ponderomotively squeezes the quantum light field. We also demonstrate that classical optical fluctuations can be attenuated by 26 dB or amplified by 20 dB with a weak input pump power of < 40 pW, and characterize the optomechanical amplifier's frequency-dependent gain and phase response in both the amplitude and phase-modulation quadratures.

  19. Experimental generation of amplitude squeezed vector beams

    CERN Document Server

    Chille, Vanessa; Semmler, Marion; Banzer, Peter; Aiello, Andrea; Leuchs, Gerd; Marquardt, Christoph

    2016-01-01

    We present an experimental method for the generation of amplitude squeezed high-order vector beams. The light is modified twice by a spatial light modulator such that the vector beam is created by means of a collinear interferometric technique. A major advantage of this approach is that it avoids systematic losses, which are detrimental as they cause decoherence in continuous-variable quantum systems. The utilisation of a spatial light modulator (SLM) gives the flexibility to switch between arbitrary mode orders. The conversion efficiency with our setup is only limited by the efficiency of the SLM. We show the experimental generation of Laguerre-Gauss (LG) modes with radial indices up to 1 and azimuthal indices up to 3 with complex polarization structures and a quantum noise reduction up to -0.9dB$\\pm$0.1dB. The corresponding polarization structures are studied in detail by measuring the spatial distribution of the Stokes parameters.

  20. Science, society, and the coastal groundwater squeeze

    Science.gov (United States)

    Michael, Holly A.; Post, Vincent E. A.; Wilson, Alicia M.; Werner, Adrian D.

    2017-04-01

    Coastal zones encompass the complex interface between land and sea. Understanding how water and solutes move within and across this interface is essential for managing resources for society. The increasingly dense human occupation of coastal zones disrupts natural groundwater flow patterns and degrades freshwater resources by both overuse and pollution. This pressure results in a "coastal groundwater squeeze," where the thin veneers of potable freshwater are threatened by contaminant sources at the land surface and saline groundwater at depth. Scientific advances in the field of coastal hydrogeology have enabled responsible management of water resources and protection of important ecosystems. To address the problems of the future, we must continue to make scientific advances, and groundwater hydrology needs to be firmly embedded in integrated coastal zone management. This will require interdisciplinary scientific collaboration, open communication between scientists and the public, and strong partnerships with policymakers.

  1. A pilot study comparing opaque, weighted bottles with conventional, clear bottles for infant feeding.

    Science.gov (United States)

    Ventura, Alison K; Pollack Golen, Rebecca

    2015-02-01

    It is hypothesized that the visual and weight cues afforded by bottle-feeding may lead mothers to overfeed in response to the amount of liquid in the bottle. The aim of the present pilot study was to test this hypothesis by comparing mothers' sensitivity and responsiveness to infant cues and infants' intakes when mothers use opaque, weighted bottles (that remove visual and weight cues) compared to conventional, clear bottles to feed their infants. We also tested the hypothesis that mothers' pressuring feeding style would moderate the effect of bottle type. Formula-feeding dyads (N = 25) visited our laboratory on two separate days. Mothers fed their infants from a clear bottle one day and an opaque, weighted bottle on the other; bottle-order was counterbalanced across the two days. Infant intake was assessed by weighing each bottle before and after the feeding. Maternal sensitivity and responsiveness to infant cues was objectively assessed using the Nursing Child Assessment Feeding Scale. Mothers were significantly more responsive to infant cues when they used opaque compared to clear bottles (p = .04). There was also a trend for infants to consume significantly less formula when fed from opaque compared to clear bottles (p = .08). Mothers' pressuring feeding style moderated the effect of bottle type on maternal responsiveness to infant cues (p = .02) and infant intake (p = .03). Specifically, mothers who reported higher levels of pressuring feeding were significantly more responsive to their infants' cues (p = .02) and fed their infants significantly less formula when using opaque versus clear bottles (p = .01); no differences were seen for mothers who reported lower levels of pressuring feeding. This study highlights a simple, yet effective intervention for improving the bottle-feeding practices of mothers who have pressuring feeding styles.

  2. EDITORIAL: Squeeze transformation and optics after Einstein

    Science.gov (United States)

    Kim, Young S.; Man'ko, Margarita A.; Planat, Michel

    2005-12-01

    With this special issue, Journal of Optics B: Quantum and Semiclassical Optics contributes to the celebration of the World Year of Physics held in recognition of five brilliant papers written by Albert Einstein in 1905. There is no need to explain to the readers of this journal the content and importance of these papers, which are cornerstones of modern physics. The 51 contributions in this special issue represent current trends in quantum optics —100 years after the concept of light quanta was introduced. At first glance, in his famous papers of 1905, Einstein treated quite independent subjects—special relativity, the nature and statistical properties of light, electrodynamics of moving bodies and Brownian motion. We now know that all these phenomena are deeply related, and these relations are clearly shown in many papers in this issue. Most of the papers are based on the talks and poster contributions from participants of the 9th International Conference on Squeezed States and Uncertainty Relations (ICSSUR'05), which took place in Besançon, France, 2-6 May, 2005. This was the continuation of a series of meetings, originating with the first workshops organized by Professor Y S Kim at the University of Maryland, College Park, USA, in 1991 and by Professor V I Man'ko at the Lebedev Physical Institute, Moscow in 1992. One of the main topics of ICSSUR'05 and this special issue is the theory and applications of squeezed states and their generalizations. At first glance, one could think that this subject has no relation to Einstein's papers. However, this is not true: the theory of squeezed states is deeply related to special relativity, as far as it is based on the representations of the Lorentz group (see the paper by Kim Y S and Noz M E, S458-S467), which also links the current concepts of entanglement and decoherence with Lorentz-covariance. Besides, studies of the different quantum states of light imply, after all, the study of photon (or photo

  3. Revisiting the fog bottle experiment

    Science.gov (United States)

    Kamcharean, C.; Khanchong, C.; Wattanakasiwich, P.

    2016-11-01

    In this article we propose an irreversible adiabatic expansion model, modified from previous work, to explain the fog bottle experiment. Our model divides the phenomenon into five thermodynamic states, and we include in our calculation irreversible work pushing a stopper out of the bottle and heat gain from the condensation of saturated vapour. In the experiment, thermodynamic variables including pressure and temperature as functions of time were measured. The work done in pushing the stopper out was measured and the condensation heat was determined using the Clausius-Clapeyron equation to determine saturated vapour pressure. As a result, fog formation was explained through a phase diagram of water showing the saturated vapour pressure during irreversible adiabatic expansion. Also, state variables (P, V and T) and the entropy change of the real process were compared with the reversible and irreversible adiabatic expansion and our modified process. Using a P-T diagram, we show that the amount of reversible work is always higher than the amount of irreversible work, due to dissipative work. According to our modified model, the dissipative work and the heat transferred from condensation cause irreversibility or {{Δ }}{S}{{t}{{o}}{{t}}{{a}}{{l}}}\\gt 0.

  4. Quality and safety aspects of reusable plastic food packaging materials: influence of reuse on intrinsic properties.

    Science.gov (United States)

    Jetten, J; de, Kruijf N

    2002-01-01

    The aim of the project was to develop a comprehensive package of quality assurance criteria for use by the industry and by regulatory authorities to ensure the quality and safety-in-use (sensory, microbiological and chemical safety) of reused plastics for food packaging. The paper describes the investigations into potential adulteration effects by reuse on the intrinsic properties of plastics in more detail. The plastic articles investigated were bottles of polyethylene terephthalate (PET) or polycarbonate (PC) and vending cups of polypropylene (PP). The influence of repeated use on the migration of plastic constituents, degradation products of plastic additives, barrier properties and surface characteristics were investigated. The overall conclusion was that the investigated intrinsic properties of the refillable articles were not significantly influenced by repeated use. Only the hydrophobicity of the refillable PC and PP articles seemed to be influenced by repeated washing. PC bottles washed 15 times were significantly less hydrophobic than unwashed bottles.

  5. Two-dimensional atom localization induced by a squeezed vacuum

    Science.gov (United States)

    Wang, Fei; Xu, Jun

    2016-10-01

    A scheme of two-dimensional (2D) atom localization induced by a squeezed vacuum is proposed, in which the three-level V-type atoms interact with two classical standing-wave fields. It is found that when the environment is changed from an ordinary vacuum to a squeezed vacuum, the 2D atom localization is realized by detecting the position-dependent resonance fluorescence spectrum. For comparison, we demonstrate that the atom localization originating from the quantum interference effect is distinct from that induced by a squeezed vacuum. Furthermore, the combined effects of the squeezed vacuum and quantum interference are also discussed under appropriate conditions. The internal physical mechanism is analyzed in terms of dressed-state representation. Project supported by the National Natural Science Foundation of China (Grant Nos. 11574179 and 11204099) and the Natural Science Foundation of Hubei Province, China (Grant No. 2014CFC1148).

  6. MRE properties under shear and squeeze modes and applications

    Energy Technology Data Exchange (ETDEWEB)

    Popp, K M [TU Bergakademie Freiberg, Institute of Machine Elements, Design and Production, Agricolastrasse 1, 09599 Freiberg (Germany); Zhang, X Z; Li, W H; Kosasih, P B [University of Wollongong, School of Mechanical, Materials and Mechatronic Engineering, NSW 2522 (Australia)], E-mail: Kristin.Popp@imkf.tu-freiberg.de, E-mail: weihuali@uow.edu.au

    2009-02-01

    Magnetorheological elastomers (MREs) belong to the group of so called smart materials. Due to an applied magnetic field the MREs change their material properties like the stiffness. This feature has resulted in a number of novel applications, such as adaptive tuned dynamic vibration absorbers (ATDVA) for suppressing unwanted vibrations over a wide frequency range. MRE based devices operate in different modes, such as shear mode and squeeze mode but the study of mechanical performances of MREs under squeeze mode is very rare. This paper aims to investigate MRE performances under both shear and squeeze modes. Both experimental and simulation studies were conducted to analyze the MR effect in both modes. These studies indicate that MRE working in squeeze mode would result in higher MR effects. As a case study, a MRE based ATDVA was analyzed, which demonstrated good capabilities in reducing vibrations.

  7. Squeezed Phonons: Modulating Quantum Fluctuations of Atomic Displacements.

    Science.gov (United States)

    Hu, Xuedong; Nori, Franco

    1997-03-01

    We have studied phonon squeezed states and also put forward several proposals for their generation(On phonon parametric process, X. Hu and F. Nori, Phys. Rev. Lett. 76), 2294 (1996); on polariton mechanism, X. Hu and F. Nori, Phys. Rev. B 53, 2419 (1996); on second-order Raman scattering, X. Hu and F. Nori, preprint.. Here, we compare the relative merits and limitations of these approaches, including several factors that will limit the amount of phonon squeezing. In particular, we investigate the effect of the initial thermal states on the phonon modes. Using a model for the phonon density matrix, we also study the mixing of the phonon squeezed states with thermal states, which describes the decay of the phonon coherence. Finally, we calculate the maximum possible squeezing from a phonon parametric process limited by phonon decay.

  8. An integrated source of broadband quadrature squeezed light

    CERN Document Server

    Hoff, Ulrich B; Andersen, Ulrik L

    2015-01-01

    An integrated silicon nitride resonator is proposed as an ultra-compact source of bright single-mode quadrature squeezed light at 850 nm. Optical properties of the device are investigated and tailored through numerical simulations, with particular attention paid to loss associated with interfacing the device. An asymmetric double layer stack waveguide geometry with inverse vertical tapers is proposed for efficient and robust fibre-chip coupling, yielding a simulated total loss of -0.75 dB/facet. We assess the feasibility of the device through a full quantum noise analysis and derive the output squeezing spectrum for intra-cavity pump self-phase modulation. Subject to standard material loss and detection efficiencies, we find that the device holds promises for generating substantial quantum noise squeezing over a bandwidth exceeding 1 GHz. In the low-propagation loss regime, approximately -7 dB squeezing is predicted for a pump power of only 50 mW.

  9. Squeezed light from second-harmonic generation: experiment versus theory.

    Science.gov (United States)

    Ralph, T C; Taubman, M S; White, A G; McClelland, D E; Bachor, H A

    1995-06-01

    We report excellent quantitative agreement between theoretical predictions and experimental observation of squeezing from a singly resonant second-harmonic-generating crystal. Limitations in the noise suppression imposed by the pump laser are explicitly modeled and confirmed by our measurements.

  10. Resonance Fluorescence from an Artificial Atom in Squeezed Vacuum

    National Research Council Canada - National Science Library

    Toyli, D. M; Eddins, A. W; Boutin, S; Puri, S; Hover, D; Bolkhovsky, V; Oliver, W. D; Blais, A; Siddiqi, I

    2016-01-01

    .... We strongly couple microwave-frequency squeezed light to a superconducting artificial atom and detect the resulting fluorescence with high resolution enabled by a broadband traveling-wave parametric amplifier...

  11. Plasticity theory

    CERN Document Server

    Lubliner, Jacob

    2008-01-01

    The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and

  12. Fifth International Conference on Squeezed States and Uncertainty Relations

    Science.gov (United States)

    Han, D. (Editor); Janszky, J. (Editor); Kim, Y. S. (Editor); Man'ko, V. I. (Editor)

    1998-01-01

    The Fifth International Conference on Squeezed States and Uncertainty Relations was held at Balatonfured, Hungary, on 27-31 May 1997. This series was initiated in 1991 at the College Park Campus of the University of Maryland as the Workshop on Squeezed States and Uncertainty Relations. The scientific purpose of this series was to discuss squeezed states of light, but in recent years the scope is becoming broad enough to include studies of uncertainty relations and squeeze transformations in all branches of physics including quantum optics and foundations of quantum mechanics. Quantum optics will continue playing the pivotal role in the future, but the future meetings will include all branches of physics where squeeze transformations are basic. As the meeting attracted more participants and started covering more diversified subjects, the fourth meeting was called an international conference. The Fourth International Conference on Squeezed States and Uncertainty Relations was held in 1995 was hosted by Shanxi University in Taiyuan, China. The fifth meeting of this series, which was held at Balatonfured, Hungary, was also supported by the IUPAP. In 1999, the Sixth International Conference will be hosted by the University of Naples in 1999. The meeting will take place in Ravello near Naples.

  13. Application Of CFD To Modeling Of Squeeze Mode Magnetorheological Dampers

    Directory of Open Access Journals (Sweden)

    Gołdasz Janusz

    2015-09-01

    Full Text Available The so-called squeeze flow involves a magnetorheological (MR fluid sandwiched between two planar surfaces setting up a flow channel. The height of the channel varies according to a prescribed displacement or force profile. When exposed to a magnetic field of sufficient strength MR fluids develop a yield stress. In squeeze-mode devices the yield stress varies with both the magnetic field magnitude and the channel height. In this paper an unsteady flow model of an MR fluid in squeeze mode is proposed. The model is developed in Ansys Fluent R16. The MR material flow model is based on the apparent viscosity approach. In order to investigate the material's behaviour the authors prepared a model of an idealized squeeze-mode damper in which the fluid flow is enforced by varying the height of the channel. Using mesh animation, the model plate is excited, and as the mesh moves, the fluid is squeezed out of the gap. In the simulations the model is subjected to a range of displacement inputs of frequencies from 10 to 20 Hz, and local yield stress levels up to 30 kPa. The results are presented in the form of time histories of the normal force on the squeezing plate and loops of force vs. displacement (velocity.

  14. Teleportation of squeezing: Optimization using non-Gaussian resources

    Science.gov (United States)

    Dell'Anno, Fabio; de Siena, Silvio; Adesso, Gerardo; Illuminati, Fabrizio

    2010-12-01

    We study the continuous-variable quantum teleportation of states, statistical moments of observables, and scale parameters such as squeezing. We investigate the problem both in ideal and imperfect Vaidman-Braunstein-Kimble protocol setups. We show how the teleportation fidelity is maximized and the difference between output and input variances is minimized by using suitably optimized entangled resources. Specifically, we consider the teleportation of coherent squeezed states, exploiting squeezed Bell states as entangled resources. This class of non-Gaussian states, introduced by Illuminati and co-workers [F. Dell’Anno, S. De Siena, L. Albano, and F. Illuminati, Phys. Rev. APLRAAN1050-294710.1103/PhysRevA.76.022301 76, 022301 (2007); F. Dell’Anno, S. De Siena, and F. Illuminati, Phys. Rev. APLRAAN1050-294710.1103/PhysRevA.81.012333 81, 012333 (2010)], includes photon-added and photon-subtracted squeezed states as special cases. At variance with the case of entangled Gaussian resources, the use of entangled non-Gaussian squeezed Bell resources allows one to choose different optimization procedures that lead to inequivalent results. Performing two independent optimization procedures, one can either maximize the state teleportation fidelity, or minimize the difference between input and output quadrature variances. The two different procedures are compared depending on the degrees of displacement and squeezing of the input states and on the working conditions in ideal and nonideal setups.

  15. Squeezing-out dynamics in free-standing smectic films

    Energy Technology Data Exchange (ETDEWEB)

    S̀liwa, Izabela, E-mail: izasliwa@ifmpan.poznan.pl [Institute of Molecular Physics, Polish Academy of Sciences, Smoluchowskiego 17, 60-179 Poznaǹ (Poland); Vakulenko, A.A. [Saint Petersburg Institute for Machine Sciences, The Russian Academy of Sciences, Saint Petersburg 199178 (Russian Federation); Zakharov, A.V., E-mail: alexandre.zakharov@yahoo.ca [Saint Petersburg Institute for Machine Sciences, The Russian Academy of Sciences, Saint Petersburg 199178 (Russian Federation)

    2016-05-06

    Highlights: • We model the dynamics of layer transitions. • We model the thermally activated nucleation of a small hole. • We model the dynamics of squeezing-out one layer. - Abstract: We have carried out a theoretical study of the dynamics of the squeezing-out of one layer from the N-layer free-standing smectic film (FSSF) coupled with a meniscus, during the layer-thinning process. Squeezing-out is initiated by a thermally activated nucleation process in which a density fluctuation forms a small void in the center of the circular FSSF. The pressure gradient develops between the squeezed-out and nonsqueezed-out areas and is responsible for the driving out of one or several layer(s) from the N-layer smectic film. The dynamics of the boundary between these areas in the FSSF is studied by the use of the conservation laws for mass and linear momentum with accounting for the coupling between the meniscus and the smectic film. This coupling has a strong effect on the dynamics of the squeezing-out process and may significantly change the time which is needed to completely squeezed-out one or several layer(s) from the N-layer smectic film.

  16. 27 CFR 24.308 - Bottled or packed wine record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled or packed wine... BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Records and Reports § 24.308 Bottled or packed wine record. A proprietor who bottles, packs, or receives bottled or packed beverage wine in bond shall...

  17. Comparative life cycle assessment and life cycle costing of four disposal scenarios for used polyethylene terephthalate bottles in Mauritius.

    Science.gov (United States)

    Foolmaun, Rajendra Kumar; Ramjeeawon, Toolseeram

    2012-09-01

    The annual rise in population growth coupled with the flourishing tourism industry in Mauritius has lead to a considerable increase in the amount of solid waste generated. In parallel, the disposal of non-biodegradable wastes, especially plastic packaging and plastic bottles, has also shown a steady rise. Improper disposal of used polyethylene terephthalate (PET) bottles constitutes an eyesore to the environmental landscape and is a threat to the flourishing tourism industry. It is of utmost importance, therefore, to determine a suitable disposal method for used PET bottles which is not only environmentally efficient but is also cost effective. This study investigated the environmental impacts and the cost effectiveness of four selected disposal alternatives for used PET bottles in Mauritius. The four disposal routes investigated were: 100% landfilling; 75% incineration with energy recovery and 25% landfilling; 40% flake production (partial recycling) and 60% landfilling; and 75% flake production and 25% landfilling. Environmental impacts of the disposal alternatives were determined using ISO standardized life cycle assessment (LCA) and with the support of SimaPro 7.1 software. Cost effectiveness was determined using life cycle costing (LCC). Collected data were entered into a constructed Excel-based model to calculate the different cost categories, Net present values, damage costs and payback periods. LCA and LCC results indicated that 75% flake production and 25% landfilling was the most environmentally efficient and cost-effective disposal route for used PET bottles in Mauritius.

  18. Abnormal Failure Analysis of H13 Punches in Steel Squeeze Casting Process

    Institute of Scientific and Technical Information of China (English)

    ZHANG Mi-lan; XING Shu-ming; XIN Qiao; XIAO Li-ming; GOU Jun-nian; WU Xia-ling

    2008-01-01

    In steel squeeze casting process, the working condition of a punch was very rigorous. The abnormal failure models of an H13 punch, such as plastic rubbed damnification, could not be avoided easily. Based on the analysis of the flow stress and the friction-shearing stress of an H13 punch in steel squeeze casting process, the following results were obtained: if the flow stress of an H13 punch was smaller than its friction-shearing stress, these abnormal failures could not be avoided; and if there were some protection measures that enable the flow stress to have a greater value than its friction-shearing one, the abnormal failures would not occur. In the production of 45# steel valves and eatenary system components, the flow stress of a lateral H13 punch without any protection measure was about 29 MPa and its friction-shearing stress.was about 51 MPa, then, the abnormal failures occurred: however, when the protection measures of the punch enabled its working temperature to have a value below 682 "C, its flow stress was greater than its friction-shearing stress, and the abnormal failures were avoided.

  19. Two-Variable Hermite Polynomial Excitation of Two-Mode Squeezed Vacuum State as Squeezed Two-Mode Number State

    Institute of Scientific and Technical Information of China (English)

    HU Li-Yun; FAN Hong-Yi

    2008-01-01

    We find that the squeezed two-mode number state is just a two-variable Hermite polynomial excitation of the two-mode squeezed vacuum state (THPES). We find that the Wigner function of THPES and its marginal distributions are just related to two-variable Hermite polynomials (or Laguerre polynomials) and that the tomogram of THPES can be expressed by one-mode Hermite polynomial.

  20. Resonance in Bottles with Different Shapes

    Directory of Open Access Journals (Sweden)

    Amy Elliott

    2012-01-01

    Full Text Available The Helmholtz Resonance equation derived in the 1800’s describes the nature of resonance in narrow-necked vessels, known as Helmholtz Resonators. It is commonly accepted that when air is blown across the opening of a bottle, the resonance can be modeled by the Helmholtz equation. Resonance was studied in two differently shaped bottles as the volume of the air cavity was varied. It was found that resonance in one of the bottles was accurately modeled by the Helmholtz equation but not in the other.

  1. Helmholtz Resonance in a Water Bottle

    Directory of Open Access Journals (Sweden)

    Annirudh Balachandran

    2011-01-01

    Full Text Available The resonance that occurs when blowing across the top of a water bottle filled with different volumes of water was studied. It was shown that, contrary to popular belief, a water bottle is not an ideal Helmholtz resonator. Resonance in a water bottle with an extendable neck was then studied to determine how the length of the neck affects the resonance. The results showed that ideal Helmholtz resonance occurs when the neck length was in a middle range, while for no neck a standing wave resonance occurs. For a very long neck the results were inconclusive.

  2. Silicon oxide permeation barrier coating of PET bottles and foils

    Science.gov (United States)

    Steves, Simon; Deilmann, Michael; Awakowicz, Peter

    2009-10-01

    Modern packaging materials such as polyethylene terephthalate (PET) have displaced established materials in many areas of food and beverage packaging. Plastic packing materials offer are various advantages concerning production and handling. PET bottles for instance are non-breakable and lightweight compared to glass and metal containers. However, PET offers poor barrier properties against gas permeation. Therefore, the shelf live of packaged food is reduced. Permeation of gases can be reduced by depositing transparent plasma polymerized silicon oxide (SiOx) barrier coatings. A microwave (2.45 GHz) driven low pressure plasma reactor is developed based on a modified Plasmaline antenna to treat PET foils or bottles. To increase the barrier properties of the coatings furthermore a RF substrate bias (13.56 MHz) is applied. The composition of the coatings is analyzed by means of Fourier transform infrared (FTIR) spectroscopy regarding carbon and hydrogen content. Influence of gas phase composition and substrate bias on chemical composition of the coatings is discussed. A strong relation between barrier properties and film composition is found: good oxygen barriers are observed as carbon content is reduced and films become quartz-like. Regarding oxygen permeation a barrier improvement factor (BIF) of 70 is achieved.

  3. EDITORIAL: Squeezed states and uncertainty relations

    Science.gov (United States)

    Jauregue-Renaud, Rocio; Kim, Young S.; Man'ko, Margarita A.; Moya-Cessa, Hector

    2004-06-01

    This special issue of Journal of Optics B: Quantum and Semiclassical Optics is composed mainly of extended versions of talks and papers presented at the Eighth International Conference on Squeezed States and Uncertainty Relations held in Puebla, Mexico on 9-13 June 2003. The Conference was hosted by Instituto de Astrofísica, Óptica y Electrónica, and the Universidad Nacional Autónoma de México. This series of meetings began at the University of Maryland, College Park, USA, in March 1991. The second and third workshops were organized by the Lebedev Physical Institute in Moscow, Russia, in 1992 and by the University of Maryland Baltimore County, USA, in 1993, respectively. Afterwards, it was decided that the workshop series should be held every two years. Thus the fourth meeting took place at the University of Shanxi in China and was supported by the International Union of Pure and Applied Physics (IUPAP). The next three meetings in 1997, 1999 and 2001 were held in Lake Balatonfüred, Hungary, in Naples, Italy, and in Boston, USA, respectively. All of them were sponsored by IUPAP. The ninth workshop will take place in Besançon, France, in 2005. The conference has now become one of the major international meetings on quantum optics and the foundations of quantum mechanics, where most of the active research groups throughout the world present their new results. Accordingly this conference has been able to align itself to the current trend in quantum optics and quantum mechanics. The Puebla meeting covered most extensively the following areas: quantum measurements, quantum computing and information theory, trapped atoms and degenerate gases, and the generation and characterization of quantum states of light. The meeting also covered squeeze-like transformations in areas other than quantum optics, such as atomic physics, nuclear physics, statistical physics and relativity, as well as optical devices. There were many new participants at this meeting, particularly

  4. GLOBEC NEP Rosette Bottle Data (2002)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GLOBEC (GLOBal Ocean ECosystems Dynamics) NEP (Northeast Pacific) Rosette Bottle Data from New Horizon Cruise (NH0207: 1-19 August 2002). Notes: Physical data...

  5. Mechanical Micronization of Lipoaspirates: Squeeze and Emulsification Techniques.

    Science.gov (United States)

    Mashiko, Takanobu; Wu, Szu-Hsien; Feng, Jingwei; Kanayama, Koji; Kinoshita, Kaori; Sunaga, Ataru; Narushima, Mitsunaga; Yoshimura, Kotaro

    2017-01-01

    Condensation of grafted fat has been considered a key for achieving better outcomes after fat grafting. The authors investigated the therapeutic potential of two mechanical tissue micronizing procedures: squeeze and emulsification. Human aspirated fat was centrifuged (centrifuged fat) and fragmented with an automated slicer (squeezed fat). Alternatively, centrifuged fat was emulsified by repeated transfer between two syringes through a small-hole connecter and then separated by mesh filtration into two portions: residual tissue of emulsified fat and filtrated fluid of emulsified fat. The four products were examined for cellular components. Histologic and electron microscopic analyses revealed that squeezed fat and residual tissue of emulsified fat contained broken adipocytes and fragmented capillaries. Compared with centrifuged fat, the squeezed fat and residual fat products exhibited increased specific gravity and increased numbers of adipose-derived stem/stromal cells and endothelial cells per volume, suggesting successful cell/tissue condensation in both squeezed fat and residual tissue of emulsified fat. Although cell number and viability in the stromal vascular fraction were well maintained in both squeezed fat and residual fat, stromal vascular fraction culture assay showed that adipose-derived stromal cells were relatively damaged in residual tissue of emulsified fat but not in squeezed fat. By contrast, no adipose-derived stromal cells were cultured from filtrated fluid of emulsified fat. The authors' results demonstrated that mechanical micronization is easily conducted as a minimal manipulation procedure, which can condense the tissue by selectively removing adipocytes without damaging key components, such as adipose-derived stromal cells and endothelial cells. Depending on the extent of adipocyte removal, the product may be a useful therapeutic tool for efficient tissue volumization or therapeutic revitalization/fertilization. Therapeutic, V.

  6. Plastic Jellyfish.

    Science.gov (United States)

    Moseley, Christine

    2000-01-01

    Presents an environmental science activity designed to enhance students' awareness of the hazards of plastic waste for wildlife in aquatic environments. Discusses how students can take steps to reduce the effects of plastic waste. (WRM)

  7. Bottled vs. Canned Beer: Do They Really Taste Different?

    Directory of Open Access Journals (Sweden)

    Andrew Barnett

    2016-09-01

    Full Text Available People often say that beer tastes better from a bottle than from a can. However, one can ask how reliable this perceived difference is across consumers. And, if reliable, one can further ask whether it is a purely psychological phenomenon (associated with the influence of packaging on taste perception, or whether instead it reflects some more mundane physico-chemical interaction between the packaging material (or packing procedure/process and the contents. Two experiments were conducted in order to address these questions. In the main experiment, 151 participants at the 2016 Edinburgh Science Festival were served a special ‘craft beer’ in a plastic cup. The beer was either poured from a bottle or can (a between-participants experimental design was used. The participants were encouraged to pick up the packaging in order to inspect the label before tasting the beer. The participants rated the perceived taste, quality, and freshness of the beer, as well as their likelihood of purchase, and estimated the price. All of the beer came from the same batch (specifically a Session IPA from Barney’s Brewery in Edinburgh. None of the participants were familiar with this particular craft brew. Nevertheless, those who evaluated the beer from the bottle rated it as tasting better than those who rated the beer served from the can. Having demonstrated such a perceptual difference (in terms of taste, we then went on to investigate whether people would prefer one packaging format over the other when the beer from bottle and can was served blind to a new group of participants (i.e., when the participants did not know the packaging material. The participants in this control study (n = 29 were asked which beer they preferred. Alternatively, they could state that the two samples tasted the same. No sign of a consistent preference was obtained under such blind tasting conditions. Explanations for the psychological impact of the packaging format, in terms of

  8. The research of clean bottle and bottle embryo recycle in the PP bottle infusion production%洁净瓶胚料在塑瓶大输液生产中回收利用的研究

    Institute of Scientific and Technical Information of China (English)

    崔良峰; 黄桂华

    2015-01-01

    Objective Crush the clean plastic bottles and bottle embryos into a certain size of particles,add new pp ag-gregate mixed according to certain proportion,blow them into PP bottles again,the pp bottles will be used in the production of pp bottle infusions. Through the identification of the risk and influence factor during the recycle of the pp materials,take corresponding control measures to ensure the quality of the final products not be affected. Methods ①Identify the risk,re-search in the risk control and production process according the risk point. ②Select pp aggregate from 3 different manufactur-ers,research the different proportions of making pp bottles. ③Use the pp bottles in the production of 0. 9% sodium chloride injection and 5% glucose injection,test,research the accelerated stability study and the package material compatibili-ty. Make sure if there is quality difference between the new products which uses mixing aggregate and original products. Re-sults and Conclusion Recycle the homogeneous clean plastic bottles and bottle embryos with a certain propor-tion. Research the accelerated stability study and the package material compatibility,and compared with normal production, there is no obvious difference in the data,and the biological experiments meet the requirement at the same time. This method can ensure the product safety and stability.%目的:将塑瓶大输液生产中灌装药液前产生的洁净瓶、胚,重新粉碎成一定粒径的颗粒后,与新 PP 粒料按一定比例混合后,重新吹制成 PP 输液瓶,用于 PP 塑瓶大输液产品的生产。通过对回收利用过程中的各种风险和影响因素进行识别,采取针对性的控制措施,确保最终产品质量不受影响。方法①进行风险识别,确定风险点并据此进行风险控制与工艺研究;②选取3个不同厂家的 PP 粒料,进行不同混合比例的制瓶研究;③将不同混合比例的 PP 瓶分别用于0.9%

  9. A novel one-step synthesis for carbon-based nanomaterials from polyethylene terephthalate (PET) bottles waste.

    Science.gov (United States)

    El Essawy, Noha A; Konsowa, Abdelaziz H; Elnouby, Mohamed; Farag, Hassan A

    2017-03-01

    Nowadays our planet suffers from an accumulation of plastic products that have the potential to cause great harm to the environment in the form of air, water, and land pollution. Plastic water bottles have become a great problem in the environment because of the large numbers consumed throughout the world. Certain types of plastic bottles can be recycled but most of them are not. This paper describes an economical solvent-free process that converts polyethylene terephthalate (PET) bottles waste into carbon nanostructure materials via thermal dissociation in a closed system under autogenic pressure together with additives and/or catalyst, which can act as cluster nuclei for carbon nanostructure materials such as fullerenes and carbon nanotubes. This research succeeded in producing and controlling the microstructure of various forms of carbon nanoparticles from the PET waste by optimizing the preparation parameters in terms of time, additives, and amounts of catalyst. Plastic water bottles are becoming a growing segment of the municipal solid waste stream in the world; some are recycled but many are left in landfill sites. Recycling PET bottles waste can positively impact the environment in several ways: for instance, reduced waste, resource conservation, energy conservation, reduced greenhouse gas emissions, and decreasing the amount of pollution in air and water sources. The main novelty of the present work is based on the acquisition of high-value carbon-based nanomaterials from PET waste by a simple solvent-free chemical technique. Thus, the prepared materials are considered to be promising, cheap, eco-friendly materials that may find use in different applications.

  10. Impact of plastics on fate and transport of organic contaminants in landfills.

    Science.gov (United States)

    Saquing, Jovita M; Saquing, Carl D; Knappe, Detlef R U; Barlaz, Morton A

    2010-08-15

    Factors controlling organic contaminant sorption to common plastics in municipal solid waste were identified. Consumer plastics [drinking water container, prescription drug bottle, soda bottle, disposable cold cup, computer casing, furniture foam, carpet, vinyl flooring, formica sheet] and model polymers [high-density polyethylene (HDPE), medium-density polyethylene, low-density polyethylene, poly(vinyl chloride) (PVC)] were characterized by X-ray diffractometry, differential scanning calorimetry, and elemental analysis. The material characterization was used to interpret batch isotherm and kinetic data. K(p) values describing toluene sorption to rubbery or "soft" polymers could be normalized by the amorphous polymer fraction (f(amorphous)) but not by the organic carbon fraction (f(oc)). Diffusion coefficients (D) describing the uptake rate of toluene by rubbery plastics (HDPE, drinking water container, prescription drug bottle) were similar (D approximately 10(-10) cm(2)/s), indicating that pure HDPE can be used as a model for rubbery plastics. Toluene diffusivity was similar among glassy or "hard" plastics (PVC, soda bottle, computer casing, disposable cold cup; D approximately 10(-12) cm(2)/s) but lower than for rubbery plastics. Plastics in landfills are potential sinks of hydrophobic organic contaminants (HOCs) because of their higher affinity for HOCs compared to lignocellulosic materials and the slow desorption of HOCs from glassy plastics.

  11. Catalytic thermal cracking of post-consumer waste plastics to fuels: Part 1 - Kinetics and optimization

    Science.gov (United States)

    Thermogravimetric analysis (TGA) was used to investigate thermal and catalytic pyrolysis of waste plastics such as prescription bottles (polypropylene/PP), high density polyethylene, landfill liners (polyethylene/PE), packing materials (polystyrene/PS), and foams (polyurethane/PU) into crude plastic...

  12. Challenges and Alternatives to Plastics Recycling in the Automotive Sector

    OpenAIRE

    Lindsay Miller; Katie Soulliere; Susan Sawyer-Beaulieu; Simon Tseng; Edwin Tam

    2014-01-01

    Plastics are increasingly a preferred material choice in designing and developing complex, consumer products, such as automobiles, because they are mouldable, lightweight, and are often perceived to be highly recyclable materials. However, actually recycling the heterogeneous plastics used in such durable items is challenging, and presents very different scenarios to how simple products, such as water bottles, are recovered via curbside or container recycling initiatives. While the technolog...

  13. Fourth International Conference on Squeezed States and Uncertainty Relations

    Science.gov (United States)

    Han, D. (Editor); Peng, Kunchi (Editor); Kim, Y. S. (Editor); Manko, V. I. (Editor)

    1996-01-01

    The fourth International Conference on Squeezed States and Uncertainty Relations was held at Shanxi University, Taiyuan, Shanxi, China, on June 5 - 9, 1995. This conference was jointly organized by Shanxi University, the University of Maryland (U.S.A.), and the Lebedev Physical Institute (Russia). The first meeting of this series was called the Workshop on Squeezed States and Uncertainty Relations, and was held in 1991 at College Park, Maryland. The second and third meetings in this series were hosted in 1992 by the Lebedev Institute in Moscow, and in 1993 by the University of Maryland Baltimore County, respectively. The scientific purpose of this series was initially to discuss squeezed states of light, but in recent years, the scope is becoming broad enough to include studies of uncertainty relations and squeeze transformations in all branches of physics, including, of course, quantum optics and foundations of quantum mechanics. Quantum optics will continue playing the pivotal role in the future, but the future meetings will include all branches of physics where squeeze transformations are basic transformation. This transition took place at the fourth meeting of this series held at Shanxi University in 1995. The fifth meeting in this series will be held in Budapest (Hungary) in 1997, and the principal organizer will be Jozsef Janszky of the Laboratory of Crystal Physics, P.O. Box 132, H-1052. Budapest, Hungary.

  14. Influence of bottle-feeding on serum bisphenol a levels in infants.

    Science.gov (United States)

    Rhie, Young-Jun; Nam, Hyo-Kyoung; Oh, Yeon Joung; Kim, Ho-Seong; Lee, Kee-Hyoung

    2014-02-01

    Exposure to endocrine disrupting chemicals (EDCs), particularly during developmental periods, gives rise to a variety of adverse health outcomes. Bisphenol A (BPA) is a well-known EDC commonly found in plastic products including food and water containers, baby bottles, and metal can linings. This study investigates infant exposure to BPA and the effect of bottle-feeding on serum BPA levels in infants. Serum BPA levels in normal healthy infants 6 to 15 months of age (n=60) were evaluated by a competitive ELISA. BPA was detected in every study sample. Serum BPA levels of bottle-fed infants (n=30) were significantly higher than those of breast-fed infants (n=30) (96.58±102.36 vs 45.53±34.05 pg/mL, P=0.014). There were no significant differences in serum BPA levels between boys (n=31) and girls (n=29). No significant correlations were found between serum BPA levels and age, body weight, birth weight, and gestational age. Bottle-feeding seems to increase the risk of infant exposure to BPA. Establishment of health policies to reduce or prevent BPA exposure in infants is necessary.

  15. Minimum Uncertainty, Coherence and Squeezing in Diffusion Processes, and Stochastic Quantization

    CERN Document Server

    De Martino, S; Illuminati, F; Vitiello, G; Martino, Salvatore De; Siena, Silvio De; Illuminati, Fabrizio; Vitiello, Giuseppe

    1993-01-01

    We show that uncertainty relations, as well as minimum uncertainty coherent and squeezed states, are structural properties for diffusion processes. Through Nelson stochastic quantization we derive the stochastic image of the quantum mechanical coherent and squeezed states.

  16. Entropy Squeezing in Coupled Field-Superconducting Charge Qubit with Intrinsic Decoherence

    Institute of Scientific and Technical Information of China (English)

    YAN Xue-Qun; SHAO Bin; ZOU Jian

    2007-01-01

    We investigate the entropy squeezing in the system of a superconducting charge qubit coupled to a single mode field. We find an exact solution of the Milburn equation for the system and discuss the influence of intrinsic decoherence on entropy squeezing. As a comparison, we also consider the variance squeezing. Our results show that in the absence of the intrinsic decoherence both entropy and variance squeezings have the same periodic properties of time,and occur at the same range of time. However, when the intrinsic decoherence is considered, we find that as the time going on the entropy squeezing disappears fast than the variance squeezing, there exists a range of time where entropy squeezing can occur but variance squeezing cannot.

  17. Information Entropy. and Squeezing of Quantum Fluctuations in a Two-Level Atom

    Institute of Scientific and Technical Information of China (English)

    FANG Mao-Fa; ZHOU Peng; S. Swain

    2000-01-01

    We study the atomic squeezing in the language of the quantum information theory. A rigorous entropy uncertainty relation which suits for characterizing the squeezing of a two-level atoms is obtained, and a general definition of information entropy squeezing in the two-level atoms is given. The information entropy squeezing of two-level atoms interacting with a single-mode quantum field is examined. Our results show that the information entropy is a superior measure of the quantum uncertainty of atomic observable, also is a remarkable good precision measure of atomic squeezing. When the population difference of two-level atom is zero, the definition of atomic squeezing based on the Heisenberg uncertainty relation is trivial, while the definition of information entropy squeezing of the atom based on the entropy uncertainty relation is valid and can provide full information on the atomic squeezing in any cases.

  18. Entanglement and extreme spin squeezing of unpolarized states

    Science.gov (United States)

    Vitagliano, Giuseppe; Apellaniz, Iagoba; Kleinmann, Matthias; Lücke, Bernd; Klempt, Carsten; Tóth, Géza

    2017-01-01

    We present criteria to detect the depth of entanglement in macroscopic ensembles of spin-j particles using the variance and second moments of the collective spin components. The class of states detected goes beyond traditional spin-squeezed states by including Dicke states and other unpolarized states. The criteria derived are easy to evaluate numerically even for systems of very many particles and outperform past approaches, especially in practical situations where noise is present. We also derive analytic lower bounds based on the linearization of our criteria, which make it possible to define spin-squeezing parameters for Dicke states. In addition, we obtain spin squeezing parameters also from the condition derived in (Sørensen and Mølmer 2001 Phys. Rev. Lett. 86 4431). We also extend our results to systems with fluctuating number of particles.

  19. Squeezing of X waves with orbital angular momentum

    CERN Document Server

    Ornigotti, Marco; Szameit, Alexander; Conti, Claudio

    2016-01-01

    Multi-level quantum protocols may potentially supersede standard quantum optical polarization-encoded protocols in terms of amount of information transmission and security. However, for free space telecomunications, we do not have tools for limiting loss due to diffraction and perturbations, as for example turbulence in air. Here we study propagation invariant quantum X-waves with angular momentum; this representation expresses the electromagnetic field as a quantum gas of weakly interacting bosons. The resulting spatio-temporal quantized light pulses are not subject to diffraction and dispersion, and are intrinsically resilient to disturbances in propagation. We show that spontaneous down-conversion generates squeezed X-waves useful for quantum protocols. Surprisingly the orbital angural momentum affects the squeezing angle, and we predict the existence of a characteristic axicon aperture for maximal squeezing. There results may boost the applications in free space of quantum optical transmission and multi-l...

  20. Squeezing of light via reflection from a silicon micromechanical resonator

    CERN Document Server

    Safavi-Naeini, Amir H; Hill, Jeff T; Chan, Jasper; Aspelmeyer, Markus; Painter, Oskar

    2013-01-01

    We present the measurement of squeezed light generation using an engineered optomechanical system fabricated from a silicon microchip and composed of a micromechanical resonator coupled to a nanophotonic cavity. Laser light is used to measure the fluctuations in the position of the mechanical resonator at a measurement rate comparable to the free dynamics of the mechanical resonator, and greater than its thermal decoherence rate. By approaching the strong continuous measurement regime we observe, through homodyne detection, non-trivial modifications of the reflected light's vacuum fluctuation spectrum. In spite of the mechanical resonator's highly excited thermal state ($10,000$ phonons), we observe squeezing at the level of $4.5 \\pm 0.5%$ below that of shot-noise over a few MHz bandwidth around the mechanical resonance frequency of 28 MHz. This squeezing is interpreted as an unambiguous quantum signature of radiation pressure shot-noise.

  1. Effects of reservoir squeezing on quantum systems and work extraction

    Science.gov (United States)

    Huang, X. L.; Wang, Tao; Yi, X. X.

    2012-11-01

    We establish a quantum Otto engine cycle in which the working substance contacts with squeezed reservoirs during the two quantum isochoric processes. We consider two working substances: (1) a qubit and (2) two coupled qubits. Due to the effects of squeezing, the working substance can be heated to a higher effective temperature, which leads to many interesting features different from the ordinary ones, such as (1) for the qubit as working substance, if we choose the squeezed parameters properly, the positive work can be exported even when TH

  2. ARRAYS OF BOTTLES OF PLUTONIUM NITRATE SOLUTION

    Energy Technology Data Exchange (ETDEWEB)

    Margaret A. Marshall

    2012-09-01

    In October and November of 1981 thirteen approaches-to-critical were performed on a remote split table machine (RSTM) in the Critical Mass Laboratory of Pacific Northwest Laboratory (PNL) in Richland, Washington using planar arrays of polyethylene bottles filled with plutonium (Pu) nitrate solution. Arrays of up to sixteen bottles were used to measure the critical number of bottles and critical array spacing with a tight fitting Plexiglas® reflector on all sides of the arrays except the top. Some experiments used Plexiglas shells fitted around each bottles to determine the effect of moderation on criticality. Each bottle contained approximately 2.4 L of Pu(NO3)4 solution with a Pu content of 105 g Pu/L and a free acid molarity H+ of 5.1. The plutonium was of low 240Pu (2.9 wt.%) content. These experiments were sponsored by Rockwell Hanford Operations because of the lack of experimental data on the criticality of arrays of bottles of Pu solution such as might be found in storage and handling at the Purex Facility at Hanford. The results of these experiments were used “to provide benchmark data to validate calculational codes used in criticality safety assessments of [the] plant configurations” (Ref. 1). Data for this evaluation were collected from the published report (Ref. 1), the approach to critical logbook, the experimenter’s logbook, and communication with the primary experimenter, B. Michael Durst. Of the 13 experiments preformed 10 were evaluated. One of the experiments was not evaluated because it had been thrown out by the experimenter, one was not evaluated because it was a repeat of another experiment and the third was not evaluated because it reported the critical number of bottles as being greater than 25. Seven of the thirteen evaluated experiments were determined to be acceptable benchmark experiments. A similar experiment using uranyl nitrate was benchmarked as U233-SOL-THERM-014.

  3. Effect of squeeze on electrostatic Trivelpiece-Gould wave damping

    Energy Technology Data Exchange (ETDEWEB)

    Ashourvan, Arash; Dubin, Daniel H. E. [Department of Physics, University of California at San Diego, La Jolla, California 92093 (United States)

    2014-05-15

    We present a theory for increased damping of Trivelpiece-Gouid plasma modes on a nonneutral plasma column, due to application of a Debye shielded cylindrically symmetric squeeze potential φ{sub 1}. We present two models of the effect this has on the plasma modes: a 1D model with only axial dependence, and a 2D model that also keeps radial dependence in the squeezed equilibrium and the mode. We study the models using both analytical and numerical methods. For our analytical studies, we assume that φ{sub 1}/T≪1, and we treat the Debye shielded squeeze potential as a perturbation in the equilibrium Hamiltonian. Our numerical simulations solve the 1D Vlasov-Poisson system and obtain the frequency and damping rate for a self-consistent plasma mode, making no assumptions as to the size of the squeeze. In both the 1D and 2D models, damping of the mode is caused by Landau resonances at energies E{sub n} for which the particle bounce frequency ω{sub b}(E{sub n}) and the wave frequency ω satisfy ω=nω{sub b}(E{sub n}). Particles experience a non-sinusoidal wave potential along their bounce orbits due to the squeeze potential. As a result, the squeeze induces bounce harmonics with n > 1 in the perturbed distribution. The harmonics allow resonances at energies E{sub n}≤T that cause substantial damping, even when wave phase velocities are much larger than the thermal velocity. In the regime ω/k≫√(T/m) (k is the wave number) and T≫φ{sub 1}, the resonance damping rate has a |φ{sub 1}|{sup 2} dependence. This dependence agrees with the simulations and experimental results.

  4. Which Q-analogue of the squeezed oscillator?

    Science.gov (United States)

    Solomon, Allan I.

    1993-01-01

    The noise (variance squared) of a component of the electromagnetic field - considered as a quantum oscillator - in the vacuum is equal to one half, in appropriate units (taking Planck's constant and the mass and frequency of the oscillator all equal to 1). A practical definition of a squeezed state is one for which the noise is less than the vacuum value - and the amount of squeezing is determined by the appropriate ratio. Thus the usual coherent (Glauber) states are not squeezed, as they produce the same variance as the vacuum. However, it is not difficult to define states analogous to coherent states which do have this noise-reducing effect. In fact, they are coherent states in the more general group sense but with respect to groups other than the Heisenberg-Weyl Group which defines the Glauber states. The original, conventional squeezed state in quantum optics is that associated with the group SU(1,1). Just as the annihilation operator a of a single photon mode (and its hermitian conjugate a, the creation operator) generates the Heisenberg Weyl algebra, so the pair-photon operator a(sup 2) and its conjugate generates the algebra of the group SU(1,1). Another viewpoint, more productive from the calculational stance, is to note that the automorphism group of the Heisenberg-Weyl algebra is SU(1,1). Needless to say, each of these viewpoints generalizes differently to the quantum group context. Both are discussed. The following topics are addressed: conventional coherent and squeezed states; eigenstate definitions; exponential definitions; algebra (group) definitions; automorphism group definition; example: signal-to-noise ratio; q-coherent and q-squeezed states; M and P q-bosons; eigenstate definitions; exponential definitions; algebra (q-group) definitions; and automorphism q-group definition.

  5. A faster urethral pressure reflectometry technique for evaluating the squeezing function

    DEFF Research Database (Denmark)

    Klarskov, Niels; Saaby, Marie-Louise; Lose, Gunnar

    2013-01-01

    Abstract Objective. Urethral pressure reflectometry (UPR) has shown to be superior in evaluating the squeeze function compared to urethral pressure profilometry. The conventional UPR measurement (step method) required up to 15 squeezes to provide one measure of the squeezing opening pressure and ...

  6. An investigation of doubly-resonant optical parametric oscillators and nonlinear crystals for squeezing

    NARCIS (Netherlands)

    Stefszky, Michael; Mow-Lowry, Conor M.; McKenzie, Kirk; Chua, Sheon; Buchler, Ben C.; Symul, Thomas; McClelland, David E.; Lam, Ping Koy

    2011-01-01

    A squeezed light source requires properties such as high squeezing amplitude, high bandwidth and stability over time, ideally using as few resources, such as laser power, as possible. We compare three nonlinear materials, two of which have not been well characterized for squeezed state production,

  7. An investigation of doubly-resonant optical parametric oscillators and nonlinear crystals for squeezing

    NARCIS (Netherlands)

    Stefszky, Michael; Mow-Lowry, Conor M.; McKenzie, Kirk; Chua, Sheon; Buchler, Ben C.; Symul, Thomas; McClelland, David E.; Lam, Ping Koy

    2011-01-01

    A squeezed light source requires properties such as high squeezing amplitude, high bandwidth and stability over time, ideally using as few resources, such as laser power, as possible. We compare three nonlinear materials, two of which have not been well characterized for squeezed state production, a

  8. Metal-matrix interpenetrating phasecomposites produced by squeeze casting

    Institute of Scientific and Technical Information of China (English)

    沈彬; 胡文彬; 刘磊; 周伟; 张荻

    2002-01-01

    On the basis of the proposition and manufacture of a new type of metal-matrix interpenetrating phase composites (MMIPCs) by vacuum high-pressure infiltration, squeeze casting method was chosen for further study on this new type of MMIPCs. By employing the highly porous ceramic perform made from SHS reaction of Al-TiO2-C system, squeeze casting process was studied in detail. By means of OM, SEM and TEM, the obtained highly porous SHS reaction products and the resulting MMIPCs for further understanding were closely examined and analyzed.

  9. Squeeze-Out of Branched Alkanes on Graphite

    Science.gov (United States)

    Gosvami, N. N.; Sinha, S. K.; O'Shea, S. J.

    2008-02-01

    We study squalane and heptamethylnonane (HMN) confined between a conducting atomic force microscope tip and a graphite surface. Solvation layering occurs for both liquids but marked differences in the squeeze out mechanics are observed for ordered or disordered monolayers. The squalane monolayer at 25°C is an ordered solid, as verified by direct imaging, and the squeeze out can be modeled using elastic continuum mechanics. HMN is in a disordered state at 25°C and cannot be modeled as a single elastic asperity even in solid-solid contact because HMN liquid is trapped in the contact zone.

  10. Coupling Measurements and Corrections for the Combined Ramp and Squeeze

    CERN Document Server

    Persson, Tobias Hakan Bjorn; Langner, Andy Sven; Malina, Lukas; Maclean, Ewen Hamish; Coello De Portugal - Martinez Vazquez, Jaime Maria; Redaelli, Stefano; Salvachua Ferrando, Belen Maria; Schaumann, Michaela; Solfaroli Camillocci, Matteo; Skowronski, Piotr Krzysztof; Tomas Garcia, Rogelio; Garcia-Tabares Valdivieso, Ana; Wenninger, Jorg; CERN. Geneva. ATS Department

    2016-01-01

    In operation of the LHC the ramp and the squeeze process have been independent beam processes up to now. Making them into a combined process would save time to reach the point where the beams are brought to collision. This would increase the integrated luminosity provided by the LHC. One possible source of problems could be deviation from the ideal optics and in particular the control of the transverse coupling. In this report we focus on the coupling measurements that were taken during the Combined Ramp and Squeeze (CRS) MD.

  11. Improvement of an Atomic Clock using Squeezed Vacuum

    DEFF Research Database (Denmark)

    Kruse, I.; Lange, K; Peise, Jan

    2016-01-01

    Since the pioneering work of Ramsey, atom interferometers are employed for precision metrology, in particular to measure time and to realize the second. In a classical interferometer, an ensemble of atoms is prepared in one of the two input states, whereas the second one is left empty. In this case......, the vacuum noise restricts the precision of the interferometer to the standard quantum limit (SQL). Here, we propose and experimentally demonstrate a novel clock configuration that surpasses the SQL by squeezing the vacuum in the empty input state. We create a squeezed vacuum state containing an average of 0...

  12. Non-gaussian statistics from individual pulses of squeezed light

    CERN Document Server

    Wenger, J; Grangier, P

    2004-01-01

    We describe the observation of a degaussification protocol that maps individual pulses of squeezed light onto non-Gaussian states. This effect is obtained by sending a small fraction of the squeezed vacuum beam onto an avalanche photodiode, and by conditioning the single-shot homodyne detection of the remaining state upon the photon-counting events. The experimental data provides a clear evidence of phase-dependent non-Gaussian statistics. This protocol is closely related to the first step of an entanglement distillation procedure for continuous variables.

  13. Non-Gaussian statistics from individual pulses of squeezed light.

    Science.gov (United States)

    Wenger, Jérôme; Tualle-Brouri, Rosa; Grangier, Philippe

    2004-04-16

    We describe the observation of a "degaussification" protocol that maps individual pulses of squeezed light onto non-Gaussian states. This effect is obtained by sending a small fraction of the squeezed vacuum beam onto an avalanche photodiode, and by conditioning the single-shot homodyne detection of the remaining state upon the photon-counting events. The experimental data provide clear evidence of phase-dependent non-Gaussian statistics. This protocol is closely related to the first step of an entanglement distillation procedure for continuous variables.

  14. Vibratile Coherence and Squeezing in Two Trapped Ions

    Institute of Scientific and Technical Information of China (English)

    ZENG HaoSheng; KUANG LeMan; ZHU XiWen; GAO KeLin

    2002-01-01

    It is shown that two trapped ions interacting with laser beams resonant to the first red side-band of center-of-mass mode, in Lamb Dicke regime and under rotating wave approximation, is described by a Jaynes-Cummingsmodel. For the initial condition that the motional state of center-of-mass mode is in vacuum state and the internal stateis prepared in a coherent superposition of states, coherence and squeezing for the vibratile motion of center-of-mass modeare discussed, particularly, a "weak" coherent state and a "weak" squeezed vacuum state are obtained. Collapse andrevival are also observed in this type of initial condition.

  15. Classical Simulation of Squeezed Vacuum in Optical Waveguide Arrays

    CERN Document Server

    Sukhorukov, Andrey A; Sipe, John

    2013-01-01

    We reveal that classical light diffraction in arrays of specially modulated coupled optical waveguides can simulate the quantum process of two-mode squeezing in nonlinear media, with the waveguide mode amplitudes corresponding the signal and idler photon numbers. The whole Fock space is mapped by a set of arrays, where each array represents the states with a fixed difference between the signal and idler photon numbers. We demonstrate a critical transition from photon number growth to Bloch oscillations with periodical revivals of an arbitrary input state, associated with an increase of the effective phase mismatch between the pump and the squeezed photons.

  16. Broadband detection of squeezed vacuum A spectrum of quantum states

    CERN Document Server

    Breitenbach, G; Schiller, S; Mlynek, J; Breitenbach, Gerd; Illuminati, Fabrizio; Schiller, Stephan; Mlynek, Jurgen

    1998-01-01

    We demonstrate the simultaneous quantum state reconstruction of the spectral modes of the light field emitted by a continuous wave degenerate optical parametric amplifier. The scheme is based on broadband measurement of the quantum fluctuations of the electric field quadratures and subsequent Fourier decomposition into spectral intervals. Applying the standard reconstruction algorithms to each bandwidth-limited quantum trajectory, a "spectrum" of density matrices and Wigner functions is obtained. The recorded states show a smooth transition from the squeezed vacuum to a vacuum state. In the time domain we evaluated the first order correlation function of the squeezed output field, showing good agreement with the theory.

  17. Enforcing Margin Squeeze Ex Post Across Converging Telecommunications Markets

    DEFF Research Database (Denmark)

    Bergqvist, Christian; Townsend, John

    A margin squeeze is an exclusionary abuse which occurs when a vertically Integrated telecoms operator creates a disparity between upstream and downstream prices with the intention of squeezing an access competitor’s profits. The purpose of such pricing is either to increase the latter’s entry costs...... and innovation present both theoretical and practical difficulties for assessing “muddled margins” on telecoms markets. New and different enforcement approaches to exclusion will have to be formulated within the Article 102 framework and tested in the Courts. This may even require abstaining from applying...

  18. Displacement of microwave squeezed states with Josephson parametric amplifiers

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Ling; Baust, Alexander; Xie, Edwar; Schwarz, Manuel; Gross, Rudolf [Walther-Meissner-Institut, Bayerische Akademie der Wissenschaften, Garching (Germany); Physik-Department, TU Muenchen, Garching (Germany); Nanosystems Initiative Munich (NIM), Muenchen (Germany); Fedorov, Kirill; Menzel, Edwin; Marx, Achim [Walther-Meissner-Institut, Bayerische Akademie der Wissenschaften, Garching (Germany); Betzenbichler, Martin; Pogorzalek, Stefan; Haeberlein, Max; Eder, Peter; Goetz, Jan; Wulschner, Karl Friedrich; Huebl, Hans; Deppe, Frank [Walther-Meissner-Institut, Bayerische Akademie der Wissenschaften, Garching (Germany); Physik-Department, TU Muenchen, Garching (Germany)

    2015-07-01

    Propagating quantum microwaves are promising building blocks for quantum communication. Interestingly, such itinerant quantum microwaves can be generated in the form of squeezed photon states by Josephson parametric amplifiers (JPA). We employ a specific ''dual-path'' setup for both state reconstruction and JPA characterization. Displacement operations are performed by using a directional coupler after the squeezing. We compare our results with theory predictions. In particular, we discuss our experiments in the context of remote state preparation and quantum teleportation with propagating microwaves.

  19. Chemical compounds and toxicological assessments of drinking water stored in polyethylene terephthalate (PET) bottles: A source of controversy reviewed.

    Science.gov (United States)

    Bach, Cristina; Dauchy, Xavier; Chagnon, Marie-Christine; Etienne, Serge

    2012-03-01

    A declaration of conformity according to European regulation No. 10/2011 is required to ensure the safety of plastic materials in contact with foodstuffs. This regulation established a positive list of substances that are authorized for use in plastic materials. Some compounds are subject to restrictions and/or specifications according to their toxicological data. Despite this, the analysis of PET reveals some non-intentionally added substances (NIAS) produced by authorized initial reactants and additives. Genotoxic and estrogenic activities in PET-bottled water have been reported. Chemical mixtures in bottled water have been suggested as the source of these toxicological effects. Furthermore, sample preparation techniques, such as solid-phase extraction (SPE), to extract estrogen-like compounds in bottled water are controversial. It has been suggested that inappropriate extraction methods and sample treatment may result in false-negative or positive responses when testing water extracts in bioassays. There is therefore a need to combine chemical analysis with bioassays to carry out hazard assessments. Formaldehyde, acetaldehyde and antimony are clearly related to migration from PET into water. However, several studies have shown other theoretically unexpected substances in bottled water. The origin of these compounds has not been clearly established (PET container, cap-sealing resins, background contamination, water processing steps, NIAS, recycled PET, etc.). Here, we surveyed toxicological studies on PET-bottled water and chemical compounds that may be present therein. Our literature review shows that contradictory results for PET-bottled water have been reported, and differences can be explained by the wide variety of analytical methods, bioassays and exposure conditions employed.

  20. Parents and nursing-bottle caries.

    Science.gov (United States)

    van Everdingen, T; Eijkman, M A; Hoogstraten, J

    1996-01-01

    In this study, the role of the parent in the phenomenon of nursing bottle caries is investigated. The main goal is to try to assess whether differences exist between parents and their children who suffer from nursing bottle caries and parents and children who are not affected by this form of dental decay. To this purpose, a questionnaire was constructed. Results showed that, in contrast to parents of non-caries children, more parents of caries children give a bottle straight from birth. These bottles more often contain sugared drinks and are given during daytime as well as at night. Children with caries and non-caries children differ in two respects: caries children on the whole are older and they have been sick more often than non-caries children. Finally, habit seems to be the major factor contributing to the use of a bottle to a relatively high age. Discussion focuses on the characterization of "typical" caries parents and their children and the implication for educational programs such a characterization could have.

  1. Ergonomics Designs of Aluminum Beverage Cans & Bottles

    Science.gov (United States)

    Han, Jing; Itoh, Ryouiti; Yamazaki, Koetsu; Nishiyama, Sadao; Shinguryo, Takuro

    2005-08-01

    This paper introduced the finite element analyses into the ergonomics designs to evaluate the human feelings numerically and objectively. Two design examples in developing aluminum beverage cans & bottles are presented. The first example describes a design of the tab of the can with better finger access. A simulation of finger pulling up the tab of the can has been performed and a pain in the finger has been evaluated by using the maximum value of the contact stress of a finger model. The finger access comparison of three kinds of tab ring shape designs showed that the finger access of the tab that may have a larger contact area with finger is better. The second example describes a design of rib-shape embossed bottles for hot vending. Analyses of tactile sensation of heat have been performed and the amount of heat transmitted from hot bottles to finger was used to present the hot touch feeling. Comparison results showed that the hot touch feeling of rib-shape embossed bottles is better than that of cylindrical bottles, and that the shape of the rib also influenced the hot touch feeling.

  2. Buying and Caring for Baby Bottles and Nipples

    Science.gov (United States)

    ... and nipples. References American Academy of Pediatrics. Practical Bottle Feeding Tips. Available at: www.healthychildren.org/English/ages-stages/baby/feeding-nutrition/Pages/Practical-Bottle-Feeding-Tips.aspx. Accessed April 7, 2015. Stettler N, ...

  3. Quantum Nondemolition Measurement of a Quantum Squeezed State Beyond the 3 dB Limit

    Science.gov (United States)

    Lei, C. U.; Weinstein, A. J.; Suh, J.; Wollman, E. E.; Kronwald, A.; Marquardt, F.; Clerk, A. A.; Schwab, K. C.

    2016-09-01

    We use a reservoir engineering technique based on two-tone driving to generate and stabilize a quantum squeezed state of a micron-scale mechanical oscillator in a microwave optomechanical system. Using an independent backaction-evading measurement to directly quantify the squeezing, we observe 4.7 ±0.9 dB of squeezing below the zero-point level surpassing the 3 dB limit of standard parametric squeezing techniques. Our measurements also reveal evidence for an additional mechanical parametric effect. The interplay between this effect and the optomechanical interaction enhances the amount of squeezing obtained in the experiment.

  4. Determinants of using pacifier and bottle feeding.

    Science.gov (United States)

    Buccini, Gabriela dos Santos; Benício, Maria Helena D'Aquino; Venancio, Sonia Isoyama

    2014-08-01

    To analyze the factors associated with the use of pacifiers and/or bottle feeding in infants aged under one year. This is a cross-sectional study with 34,366 children and using data from the database of the 2nd Nationwide Survey of Breastfeeding Prevalence performed in the Brazilian capitals and Federal District in 2008. Cluster sampling was used. The questionnaire included questions about the use of artificial nipples in the last 24 hours. The analysis considered three outcomes: exclusive use of pacifier, exclusive use of bottle feeding, and use of artificial nipples (pacifier and bottle feeding). Prevalence ratios were obtained using Poisson regression with robust variance following a hierarchical model. The following factors were associated with exclusive use of the pacifier: mother working outside the home, primiparity, child was not breastfed within the first hour, and child had consumed tea on the first day at home. The following factors were associated with exclusive use of bottle feeding: mother working outside the home, primiparity, low birth weight, child not breastfed within the first hour, and child had consumed milk formula and tea on the first day at home. The following factors were associated with use of artificial nipples (pacifier and bottle feeding): mother working outside the home, primiparity, cesarean delivery, the male gender, low birth weight, born in a hospital not accredited as "baby friendly", required health baby monitoring in the Primary Health Care Unit (PR = 0.91), and child had consumed milk formula, water, or tea on the first day at home. This study identified profiles of exclusive users of pacifiers, bottle feeding, and both. The provided information can guide preventive practices for child health.

  5. Determinants of using pacifier and bottle feeding

    Directory of Open Access Journals (Sweden)

    Gabriela dos Santos Buccini

    2014-08-01

    Full Text Available OBJECTIVE To analyze the factors associated with the use of pacifiers and/or bottle feeding in infants aged under one year. METHODS This is a cross-sectional study with 34,366 children and using data from the database of the 2nd Nationwide Survey of Breastfeeding Prevalence performed in the Brazilian capitals and Federal District in 2008. Cluster sampling was used. The questionnaire included questions about the use of artificial nipples in the last 24 hours. The analysis considered three outcomes: exclusive use of pacifier, exclusive use of bottle feeding, and use of artificial nipples (pacifier and bottle feeding. Prevalence ratios were obtained using Poisson regression with robust variance following a hierarchical model. RESULTS The following factors were associated with exclusive use of the pacifier: mother working outside the home, primiparity, child was not breastfed within the first hour, and child had consumed tea on the first day at home. The following factors were associated with exclusive use of bottle feeding: mother working outside the home, primiparity, low birth weight, child not breastfed within the first hour, and child had consumed milk formula and tea on the first day at home. The following factors were associated with use of artificial nipples (pacifier and bottle feeding: mother working outside the home, primiparity, cesarean delivery, the male gender, low birth weight, born in a hospital not accredited as “baby friendly”, required health baby monitoring in the Primary Health Care Unit (PR = 0.91, and child had consumed milk formula, water, or tea on the first day at home. CONCLUSIONS This study identified profiles of exclusive users of pacifiers, bottle feeding, and both. The provided information can guide preventive practices for child health.

  6. Scoping study on coastal squeeze in the Ayeyarwady Delta

    NARCIS (Netherlands)

    Kroon, M.E.N.; Rutten, M.M.; Stive, M.J.F.; Wunna, S.

    2015-01-01

    Coastal squeeze is the reduction in the space of coastal habitats to operate (Phan et al, 2014) and an important cause for coastline retreat, increase in flood risk, salinity intrusion etc. Land use changes, such as deforestation and urbanization, reduce the space of natural habitats, such as mangro

  7. Why the Marriage Squeeze Cannot Cause Dowry Inflation

    NARCIS (Netherlands)

    Anderson, K.S.

    2000-01-01

    It has been argued that rising dowry payments are caused by population growth.According to that explanation, termed the `marriage squeeze', a population increase leads to an excess supply of brides since men marry younger women.As a result, dowry payments rise in order to clear the marriage market.T

  8. Spin squeezing and light entanglement in Coherent Population Trapping

    DEFF Research Database (Denmark)

    Dantan, Aurelien Romain; Cviklinski, Jean; Giacobino, Elisabeth;

    2006-01-01

    We show that strong squeezing and entanglement can be generated at the output of a cavity containing atoms interacting with two fields in a coherent population trapping situation, on account of a nonlinear Faraday effect experienced by the fields close to a dark-state resonance in a cavity...

  9. Squeezed State Effects on Continuous Variable Quantum Erasing

    Science.gov (United States)

    Bonanno, Peter; Kasisomayajula, Vijay; Russo, Onofrio

    2008-03-01

    Experimental verification of complementarity using quantum erasing for the continuous variable (CV) infinite dimensional Hilbert space has been considered. [1] The complemetary pair is that of the canonically conjugate amplitude and phase quadratures of light. The amplitude quadrature is labeled to a squeezed meter signal by quantum nondemolition (QND) [2] entanglement coupling. [3] Knowledge of which eigenstate (WE) can be obtained by measuring this amplitude in the meter state, and can thereafter be `lost' by measuring the quadrature phase of the meter, thus restoring the quadrature phase of the signal beam in a process known as quantum erasure. [4] The coupling, i.e. the labeling of the signal state to the meter state, is implemented with a beam splitter coupled to the squeezed light meter beam. [4] We investigate the effects of using the unitary squeeze operator S(z)=exp.5ex1 -.1em/ -.15em.25ex2 (z*a^2 - za^+2) where z = re^i(squeezing angle) on selected coherent states under certain conditions. [5,6] [1] U. L. Anderson et al., Phys. Rev. Lett. 93, 100403 (2004). [2] V. B. Braginsky et al., Science 209, 547 (1980). [3] R. Bruckmeimer et al., Phys. Rev. Lett. 79, 43 (1997). [4] P. Grangier et al., Nature 396, 537 (1998). [5] C. M. Caves, Phys. Rev. D 23, 1693 (1981). [6] D. Stoler, Phys. Rev. D. 1, 3217 (1970), D. Stoler, Phys. Rev. D. 4, 1925 (1971). .

  10. Squeezing and entangling nuclear spins in helium 3

    DEFF Research Database (Denmark)

    Reinaudi, Gael; Sinatra, Alice; Dantan, Aurelien Romain

    2007-01-01

    We present a realistic model for transferring the squeezing or the entanglement of optical field modes to the collective ground state nuclear spin of 3He using metastability exchange collisions. We discuss in detail the requirements for obtaining good quantum state transfer efficiency and study t...

  11. Scoping study on coastal squeeze in the Ayeyarwady Delta

    NARCIS (Netherlands)

    Kroon, M.E.N.; Rutten, M.M.; Stive, M.J.F.; Wunna, S.

    2015-01-01

    Coastal squeeze is the reduction in the space of coastal habitats to operate (Phan et al, 2014) and an important cause for coastline retreat, increase in flood risk, salinity intrusion etc. Land use changes, such as deforestation and urbanization, reduce the space of natural habitats, such as mangro

  12. Wormholes and negative energy from the gravitationally squeezed vacuum

    Science.gov (United States)

    Hochberg, David

    1992-01-01

    Minkowski-signature wormhole solutions of the Einstein field equations require the existence of negative energy density in the vicinity of their throats. We point out that the gravitational interaction automatically generates squeezed vacuum states of matter, which by their nature, entail negative energy and, thus, provide a natural source for maintaining this class of wormholes.

  13. Lorentz Harmonics, Squeeze Harmonics and Their Physical Applications

    Directory of Open Access Journals (Sweden)

    Marilyn E. Noz

    2011-02-01

    Full Text Available Among the symmetries in physics, the rotation symmetry is most familiar to us. It is known that the spherical harmonics serve useful purposes when the world is rotated. Squeeze transformations are also becoming more prominent in physics, particularly in optical sciences and in high-energy physics. As can be seen from Dirac’s light-cone coordinate system, Lorentz boosts are squeeze transformations. Thus the squeeze transformation is one of the fundamental transformations in Einstein’s Lorentz-covariant world. It is possible to define a complete set of orthonormal functions defined for one Lorentz frame. It is shown that the same set can be used for other Lorentz frames. Transformation properties are discussed. Physical applications are discussed in both optics and high-energy physics. It is shown that the Lorentz harmonics provide the mathematical basis for squeezed states of light. It is shown also that the same set of harmonics can be used for understanding Lorentz-boosted hadrons in high-energy physics. It is thus possible to transmit physics from one branch of physics to the other branch using the mathematical basis common to them.

  14. Four modes of optical parametric operation for squeezed state generation

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund; Buchler, B.C.; Lam, P.K.;

    2003-01-01

    of this light, including a full quantum state tomography. In addition we demonstrate the direct detection of the squeezed state statistics without the aid of a spectrum analyser. This technique makes the nonclassical properties directly visible and allows complete measurement of the statistical moments...

  15. Gaussian private quantum channel with squeezed coherent states

    Science.gov (United States)

    Jeong, Kabgyun; Kim, Jaewan; Lee, Su-Yong

    2015-01-01

    While the objective of conventional quantum key distribution (QKD) is to secretly generate and share the classical bits concealed in the form of maximally mixed quantum states, that of private quantum channel (PQC) is to secretly transmit individual quantum states concealed in the form of maximally mixed states using shared one-time pad and it is called Gaussian private quantum channel (GPQC) when the scheme is in the regime of continuous variables. We propose a GPQC enhanced with squeezed coherent states (GPQCwSC), which is a generalization of GPQC with coherent states only (GPQCo) [Phys. Rev. A 72, 042313 (2005)]. We show that GPQCwSC beats the GPQCo for the upper bound on accessible information. As a subsidiary example, it is shown that the squeezed states take an advantage over the coherent states against a beam splitting attack in a continuous variable QKD. It is also shown that a squeezing operation can be approximated as a superposition of two different displacement operations in the small squeezing regime. PMID:26364893

  16. Quantum reconstruction of an intense polarization squeezed optical state

    DEFF Research Database (Denmark)

    Marquardt, Ch.; Heersink, J.; Dong, R.

    2007-01-01

    We perform a reconstruction of the polarization sector of the density matrix of an intense polarization squeezed beam starting from a complete set of Stokes measurements. By using an appropriate quasidistribution, we map this onto the Poincare space, providing a full quantum mechanical...... characterization of the measured polarization state....

  17. Instantaneous, non-squeezed, noise-based logic

    CERN Document Server

    Peper, Ferdinand

    2010-01-01

    Noise-based logic, by utilizing its multidimensional logic hyperspace, has significant potential for low-power parallel operations in beyond-Moore-chips. However universal gates for Boolean logic thus far had to rely on either time averaging to distinguish signals from each other or, alternatively, on squeezed logic signals, where the logic-high was represented by a random process and the logic-low was a zero signal. A major setback is that squeezed logic variables are unable to work in the hyperspace, because the logic-low zero value sets the hyperspace product vector to zero. This paper proposes Boolean universal logic gates that alleviate such shortcomings. They are able to work with non-squeezed logic values where both the high and low values are encoded into nonzero, bipolar, independent random telegraph waves. Non-squeezed universal Boolean logic gates for spike-based brain logic are also shown. The advantages vs. disadvantages of the two logic types are compared.

  18. Squeezing-enhanced measurement sensitivity in a cavity optomechanical system

    DEFF Research Database (Denmark)

    Kerdoncuff, Hugo; Hoff, Ulrich Busk; Harris, Glen I.;

    2015-01-01

    We determine the theoretical limits to squeezing-enhanced measurement sensitivity of mechanical motion in a cavity optomechanical system. The motion of a mechanical resonator is transduced onto quadrature fluctuations of a cavity optical field and a measurement is performed on the optical field e...

  19. Dynamical squeezing enhancement in the off-resonant Dicke model

    Energy Technology Data Exchange (ETDEWEB)

    Shindo, D; Chavez, A; Chumakov, S M; Klimov, A B [Departamento de FIsica, Universidad de Guadalajara, Revolucion 1500, 44420, Guadalajara, Jalisco (Mexico)

    2004-01-01

    We show that the maximum atomic squeezing that can be achieved in the vacuum off-resonant Dicke model (governed by the effective Hamiltonian {approx} S{sub z}{sup 2}) can be essentially enhanced by applying a sequence of {pi}/2 pulses at certain time moments. The major effect is obtained after the first pulse.

  20. Holographic Description of Negative Null Energy in Squeezed Vacuum States

    CERN Document Server

    Lee, Da-Shin

    2016-01-01

    Using the AdS/CFT duality, we study the expectation value of stress tensor in squeezed vacuum states of $2+1$-dimensional quantum critical theories with a general dynamical scaling $z$. The holographic dual theory is the theory of gravity in 3+1-dimensional Lifshitz backgrounds. We then adopt a consistent approach to obtain the boundary stress tensor from bulk construction, which satisfies the trace Ward identity associated with Lifshitz scaling symmetry. The scheme for holographic dual of squeezed vacuum states is found to be the gravity theory in the geometry perturbed by gravitational wave. For small squeezing parameters, the expectation value of stress tensor in squeezed vacuum states is obtained for both strongly coupled quantum critical fields and free relativistic fields. We find that, in both cases with $z=1$, the stress tensor satisfies the averaged null energy condition and is consistent with the quantum interest conjecture. In particular, the negative lower bound on null-contracted stress tensor, w...

  1. Globalisation squeezes the public sector - is it so obvious?

    DEFF Research Database (Denmark)

    Andersen, Torben M.; Sørensen, Allan

    It is widely perceived that globalization squeezes public sector activities by making taxation more costly. This is attributed to increased factor mobility and to a more elastic labour demand due to improved scope for relocation of production and thus employment across countries. We argue...

  2. Quantum correlations induced by multiple scattering of quadrature squeezed light

    DEFF Research Database (Denmark)

    Lodahl, Peter

    2006-01-01

    Propagating quadrature squeezed light through a multiple scattering random medium is found to induce pronounced spatial quantum correlations that have no classical analogue. The correlations are revealed in the number of photons transported through the sample that can be measured from the intensity...

  3. Polarization squeezing and entanglement produced by a frequency doubler

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund; Buchhave, Preben

    2003-01-01

    The quantum mechanical polarization properties of a nondegenerate second harmonic generator, where a nonlinear type II crystal is placed inside a cavity, are investigated theoretically. We demonstrate the possibility of strong squeezing of the continuous Stokes parameters as well as strong entang...... entanglement between them....

  4. Squeezing of thermal and quantum fluctuations: Universal features

    DEFF Research Database (Denmark)

    Svensmark, Henrik; Flensberg, Karsten

    1993-01-01

    We study the classical and quantum fluctuations of a general damped forced oscillator close to a bifurcation instability. Near the instability point, the fluctuations are strongly phase correlated and are squeezed. In the limit of low damping, it is shown that the system has universal features wh...

  5. Demonstration of deterministic and high fidelity squeezing of quantum information

    DEFF Research Database (Denmark)

    Yoshikawa, J-I.; Hayashi, T-; Akiyama, T.

    2007-01-01

    By employing a recent proposal [R. Filip, P. Marek, and U.L. Andersen, Phys. Rev. A 71, 042308 (2005)] we experimentally demonstrate a universal, deterministic, and high-fidelity squeezing transformation of an optical field. It relies only on linear optics, homodyne detection, feedforward, and an...

  6. Formation of Small Bottle Light Beams

    Institute of Scientific and Technical Information of China (English)

    RAO Lian-zhou; PU Ji-Xiong

    2007-01-01

    A method for obtaining small bottle light beams,e.g.0.92λ×0.4λ,in a high numerical-aperture lens system is proposed and numerically demonstrated.This can be achieved by changing the radius of each zone of the binary element and polarization rotation angle of the cylindrically polarized vectorial vortex beam.It is found that the transversal and axial sizes of this bottle bearn are equal to about 0.92λ and 0.4λ,respectively.In addition,the connection between angular momentum and topological Pancharatnam charge is also shown.

  7. 27 CFR 24.255 - Bottling or packing wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling or packing wine..., DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine Bottling, Packing, and Labeling of Wine § 24.255 Bottling or packing wine. (a) General. Proprietors of a bonded wine premises and...

  8. 27 CFR 19.749 - Bottling and packaging record.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottling and packaging record. 19.749 Section 19.749 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Account § 19.749 Bottling and packaging record. The bottling and packaging record shall be prepared...

  9. Bottle-feeding and the Risk of Pyloric Stenosis

    DEFF Research Database (Denmark)

    Krogh, Camilla; Biggar, Robert J; Fischer, Thea Kølsen

    2012-01-01

    Bottle-feeding has been suggested to increase the risk of pyloric stenosis (PS). However, large population-based studies are needed. We examined the effect of bottle-feeding during the first 4 months after birth, by using detailed data about the timing of first exposure to bottle...

  10. 27 CFR 28.102 - Bottles to have closures affixed.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottles to have closures... Transportation to a Manufacturing Bonded Warehouse § 28.102 Bottles to have closures affixed. Every bottle containing distilled spirits to be withdrawn under the provisions of this subpart shall have a closure...

  11. Information Entropy Squeezing for a Atom in Mode-Mode Competition System

    Institute of Scientific and Technical Information of China (English)

    WU Qin; FANG Mao-Fa; LI Shao-Xin; LI Ying; HU Yao-Hua

    2008-01-01

    The entropy squeezing properties for a two-level atom interacting with a two-mode field via two different competing transitions are investigated from a quantum information point of view. The influences of the initial state of the system and the relative coupling strength between the atom and the field on the atomic information entropy squeezing are discussed. Our results show that the squeezed direction and the frequency of the information entropy squeezing can be controlled by choosing the phase of the atom dipole and the relative competing strength of atom-field, respectively. We find that, under the same condition, no atomic variance squeezing is predicted from the HUR while optimal entropy squeezing is obtained from the EUR, so the quantum information entropy is a remarkable precision measure for the atomic squeezing in the considered system.

  12. Generation of continuous-wave and pulsed squeezed light with $^{87}$Rb vapor

    CERN Document Server

    Agha, Imad H; Grangier, Philippe

    2009-01-01

    We present experimental studies on the generation of squeezed vacuum via nonlinear ellipse rotation in a $^{87}$Rb vapor. Squeezing is observed for a wide range of input powers and pump detunings on the D1 line, while only excess noise is present on the D2 line. The maximum squeezing observed is -1.4 $\\pm$0.1 dB (-2.0 dB corrected for loss). We measure -1.1 dB squeezing at the resonance frequency of the $^{85}$Rb $F=2 \\to F'=3$ transition, which may allow the storage of squeezed light generated by $^{87}$Rb in a $^{85}$Rb quantum memory. We also demonstrate a proof of principle pulsed squeezed light experiment, with -1 dB of squeezing for 200 ns pulse width.

  13. Generation of pulsed and continuous-wave squeezed light with 87Rb vapor.

    Science.gov (United States)

    Agha, Imad H; Messin, Gaétan; Grangier, Philippe

    2010-03-01

    We present experimental studies on the generation of pulsed and continuous-wave squeezed vacuum via nonlinear rotation of the polarization ellipse in a (87)Rb vapor. Squeezing is observed for a wide range of input powers and pump detunings on the D1 line, while only excess noise is present on the D2 line. The maximum continuous-wave squeezing observed is -1.4 +/- 0.1 dB (-2.0 dB corrected for losses). We measure -1.1 dB squeezing at the resonance frequency of the (85)Rb F = 3 --> F' transition, which may allow the storage of squeezed light generated by (87)Rb in a (85)Rb quantum memory. Using a pulsed pump, pulsed squeezed light with -1 dB of squeezing for 200 ns pulse widths is observed at 1 MHz repetition rate.

  14. Entropy squeezing for a two—level atom in the Jaynes—Cummings model with an intensity—depend coupling

    Institute of Scientific and Technical Information of China (English)

    李春先; 方卯发; 等

    2003-01-01

    We study the squeezing for a two-level atom in the Jaynes-Cumings model with intensity-dependent coupling using quantum information entropy,and examine the influences of the initial state of the system on the squeezed component number and direction of the information entropy squeezing.Our results show that,the squeezed component number depends on the atomic initial distribution angle,while the squeezed direction is determined by both the phases of the atom and the field for the information entropy squeezing.Quantum information entropy is shown to be a remarkable precision measure for atomic squeezing.

  15. Entropy squeezing for a two-level atom in the Jaynes-Cummings model with an intensity-depend coupling

    Institute of Scientific and Technical Information of China (English)

    李春先; 方卯发

    2003-01-01

    We study the squeezing for a two-level atom in the Jaynes-Cummings model with intensity-dependent coupling using quantum information entropy, and examine the influences of the initial state of the system on the squeezed component number and direction of the information entropy squeezing. Our results show that, the squeezed component number depends on the atomic initial distribution angle, while the squeezed direction is determined by both the phases of the atom and the field for the information entropy squeezing. Quantum information entropy is shown to be a remarkable precision measure for atomic squeezing.

  16. Plastics Technology.

    Science.gov (United States)

    Barker, Tommy G.

    This curriculum guide is designed to assist junior high schools industrial arts teachers in planning new courses and revising existing courses in plastics technology. Addressed in the individual units of the guide are the following topics: introduction to production technology; history and development of plastics; safety; youth leadership,…

  17. Squeezing Alters Frequency Tuning of WGM Optical Resonator

    Science.gov (United States)

    Mohageg, Makan; Maleki, Lute

    2010-01-01

    Mechanical squeezing has been found to alter the frequency tuning of a whispering-gallery-mode (WGM) optical resonator that has an elliptical shape and is made of lithium niobate. It may be possible to exploit this effect to design reconfigurable optical filters for optical communications and for scientific experiments involving quantum electrodynamics. Some background information is prerequisite to a meaningful description of the squeezing-induced alteration of frequency tuning: The spectrum of a WGM resonator is represented by a comblike plot of intensity versus frequency. Each peak of the comblike plot corresponds to an electromagnetic mode represented by an integer mode number, and the modes are grouped into sets represented by integer mode indices. Because lithium niobate is an electro-optically active material, the WGM resonator can be tuned (that is, the resonance frequencies can be shifted) by applying a suitable bias potential. The frequency shift of each mode is quantified by a tuning rate defined as the ratio between the frequency shift and the applied potential. In the absence of squeezing, all modes exhibit the same tuning rate. This concludes the background information. It has been demonstrated experimentally that when the resonator is squeezed along part of either of its two principal axes, tuning rates differ among the groups of modes represented by different indices (see figure). The differences in tuning rates could be utilized to configure the resonance spectrum to obtain a desired effect; for example, through a combination of squeezing and electrical biasing, two resonances represented by different mode indices could be set at a specified frequency difference something that could not be done through electrical biasing alone.

  18. 洗发水瓶揭盖式瓶盖注塑模设计%Design of Injection Mould for Shampoo Bottle Uncovery Type Bottle Cap

    Institute of Scientific and Technical Information of China (English)

    何亮; 喻慧文; 曾雪东

    2015-01-01

    洗发水瓶揭盖式瓶盖的结构比较复杂,应用Pro/E软件的塑料顾问模块对塑料件进行分析,确定合适的点浇口位置,并着重阐述了滑块斜顶抽芯机构、顶管二次脱模的设计要点和模具工作原理。应用结果表明,该模具结构动作准确、可靠,成型的塑料件质量较好,具有良好的经济效益。%The structure of shampoo bottle uncovery type bottle cap is complex. The pin gate position was determined by using the plastic advisor of Pro/E software. The design points of lifter slider core pulling mechanism and ejector sleeve using to secondary stripping were mainly described,in addition the mould working principle were too discussed. Production practice prove that the design of the mould structure is reasonable and reliable,the plastic parts have good quality,and it has the good economic efficiency.

  19. Legionella pneumophila in commercial bottled mineral water.

    NARCIS (Netherlands)

    Klont, R.R.; Rijs, A.J.M.M.; Warris, A.; Sturm, P.D.J.; Melchers, W.J.G.; Verweij, P.E.

    2006-01-01

    Sixty-eight commercial bottled mineral waters (64 brands, 68 different 'best-before dates') were tested for the presence of bacteria and fungi. Six samples were Legionella antigen positive and six were Legionella pneumophila PCR positive. Two samples were both Legionella antigen and L. pneumophila P

  20. IS BOTTLE GOURD A NATURAL GUARD??

    Directory of Open Access Journals (Sweden)

    Kaur Satbir

    2011-06-01

    Full Text Available Bottle gourd is one of the excellent fruits gifted by nature to human beings having composition of all the essential constituents that are required for good health and quality human life. Lagenaria siceraria (Cucurbitaceae, popularly known as bottle gourd, lauki or ghiya, is a climbing plant, which bears hard-shelled and bottle-shaped gourds as fruits. It forms an excellent diet being rich in vitamins, iron and minerals. The fruit is reported to contain the triterepenoide cucurbitacins B, D, G, H, two sterols viz., fucosterol and campesterol, aerpene byonolic acid (an allergic compound, flavone-C glycosides (a ribosome inactivating protein and lagenin. Extract of the ghiya seeds show antibiotic activity. The fruit juice is helpful in constipation, premature graying hair, urinary disorders and insomnia. Lauki has the highest content of choline among all the vegetables known to man till date, which serves as the precursor of neurotransmitter acetylcholine, which in turn is crucial for retaining and enhancing memory. Furthermore, Lagenaria siceraria is a vegetable useful in the management of many diseases like cardiac disorders, hepatic diseases and ulcer. Bottle gourd juice helps to regulate blood pressure of hypertensive patients, because of its high potassium content. It helps in losing weight quickly, because of its high dietary fiber and low fat and cholesterol content. In the light of above facts, the authors have made a humble attempt to compile an up-to-date review article on Lagenaria siceraria covering its phytochemistry, pharmacological actions and folk medicinal uses.

  1. Leaching of the plasticizer di(2-ethylhexyl)phthalate (DEHP) from plastic containers and the question of human exposure.

    Science.gov (United States)

    Erythropel, Hanno C; Maric, Milan; Nicell, Jim A; Leask, Richard L; Yargeau, Viviane

    2014-12-01

    Di(2-ethylhexyl)phthalate (DEHP) is a widely used plasticizer to render poly(vinyl chloride) (PVC) soft and malleable. Plasticized PVC is used in hospital equipment, food wrapping, and numerous other commercial and industrial products. Unfortunately, plasticizers can migrate within the material and leach out of it over time, ending up in the environment and, frequently, the human body. DEHP has come under increased scrutiny as its breakdown products are believed to be endocrine disruptors and more toxic than DEHP itself. DEHP and its breakdown products have been identified as ubiquitous environmental contaminants, and daily human exposure is estimated to be in the microgram per kilogram level. The objective of this review is to summarize and comment on published sources of DEHP exposure and to give an overview of its environmental fate. Exposure through bottled water was examined specifically, as this concern is raised frequently, yet only little exposure to DEHP occurs through bottled water, and DEHP exposure is unlikely to stem from the packaging material itself. Packaged food was also examined and showed higher levels of DEHP contamination compared to bottled water. Exposure to DEHP also occurs in hospital environments, where DEHP leaches directly into liquids that passed through PVC/DEHP tubing and equipment. The latter exposure is at considerably higher levels compared to food and bottled water, specifically putting patients with chronic illnesses at risk. Overall, levels of DEHP in food and bottled water were below current tolerable daily intake (TDI) values. However, our understanding of the risks of DEHP exposure is still evolving. Given the prevalence of DEHP in our atmosphere and environment, and the uncertainty revolving around it, the precautionary principle would suggest its phaseout and replacement. Increased efforts to develop viable replacement compounds, which necessarily includes rigorous leaching, toxicity, and impact assessment studies, are

  2. Optimization of Squeeze Casting for Aluminum Alloy Parts

    Energy Technology Data Exchange (ETDEWEB)

    David Schwam; John F. Wallace; Qingming Chang; Yulong Zhu

    2002-07-30

    This study was initiated with the installation of a new production size UBE 350 Ton VSC Squeeze Casting system in the Metal Casting Laboratory at Case Western University. A Lindberg 75k W electrical melting furnace was installed alongside. The challenge of installation and operation of such industrial-size equipment in an academic environment was met successfully. Subsequently, a Sterling oil die heater and a Visi-Track shot monitoring system were added. A significant number of inserts were designed and fabricated over the span of the project, primarily for squeeze casting different configurations of test bars and plates. A spiral ''ribbon insert'' for evaluation of molten metal fluidity was also fabricated. These inserts were used to generate a broad range of processing conditions and determine their effect on the quality of the squeeze cast parts. This investigation has studied the influence of the various casting variables on the quality of indirect squeeze castings primarily of aluminum alloys. The variables studied include gating design, fill time and fill patter, metal pressure and die temperature variations. The quality of the die casting was assessed by an analysis of both their surface condition and internal soundness. The primary metal tested was an aluminum 356 alloy. In addition to determining the effect of these casting variables on casting quality as measured by a flat plate die of various thickness, a number of test bar inserts with different gating designs have been inserted in the squeeze casting machine. The mechanical properties of these test bars produced under different squeeze casting conditions were measured and reported. The investigation of the resulting properties also included an analysis of the microstructure of the squeeze castings and the effect of the various structural constituents on the resulting properties. The main conclusions from this investigation are as follows: The ingate size and shape are very important

  3. The significance of late-stage processes in lava flow emplacement: squeeze-ups in the 2001 Etna flow field

    Science.gov (United States)

    Applegarth, L. J.; Pinkerton, H.; James, M. R.

    2009-04-01

    The general processes associated with the formation and activity of ephemeral boccas in lava flow fields are well documented (e.g. Pinkerton & Sparks 1976; Polacci & Papale 1997). The importance of studying such behaviour is illustrated by observations of the emplacement of a basaltic andesite flow at Parícutin during the 1940s. Following a pause in advance of one month, this 8 km long flow was reactivated by the resumption of supply from the vent, which forced the rapid drainage of stagnant material in the flow front region. The material extruded during drainage was in a highly plastic state (Krauskopf 1948), and its displacement allowed hot fluid lava from the vent to be transported in a tube to the original flow front, from where it covered an area of 350,000 m2 in one night (Luhr & Simkin 1993). Determining when a flow has stopped advancing, and cannot be drained in such a manner, is therefore highly important in hazard assessment and flow modelling, and our ability to do this may be improved through the examination of relatively small-scale secondary extrusions and boccas. The 2001 flank eruption of Mt. Etna, Sicily, resulted in the emplacement of a 7 km long compound `a`ā flow field over a period of 23 days. During emplacement, many ephemeral boccas were observed in the flow field, which were active for between two and at least nine days. The longer-lived examples initially fed well-established flows that channelled fresh material from the main vent. With time, as activity waned, the nature of the extruded material changed. The latest stages of development of all boccas involved the very slow extrusion of material that was either draining from higher parts of the flow or being forced out of the flow interior as changing local flow conditions pressurised parts of the flow that had been stagnant for some time. Here we describe this late-stage activity of the ephemeral boccas, which resulted in the formation of ‘squeeze-ups' of lava with a markedly different

  4. Plastic bronchitis

    National Research Council Canada - National Science Library

    Singhi, Anil Kumar; Vinoth, Bharathi; Kuruvilla, Sarah; Sivakumar, Kothandam

    2015-01-01

    Plastic bronchitis, a rare but serious clinical condition, commonly seen after Fontan surgeries in children, may be a manifestation of suboptimal adaptation to the cavopulmonary circulation with unfavorable hemodynamics...

  5. Plastic Fishes

    CERN Multimedia

    Trettnak, Wolfgang

    2015-01-01

    In terms of weight, the plastic pollution in the world’s oceans is estimated to be around 300,000 tonnes. This plastic comes from both land-based and ocean-based sources. A lecture at CERN by chemist Wolfgang Trettnak addressed this issue and highlighted the role of art in raising people’s awareness. The slideshow below gives you a taste of the artworks by Wolfgang Trettnak and Margarita Cimadevila.

  6. Plastic Bridge

    Institute of Scientific and Technical Information of China (English)

    履之

    1994-01-01

    Already ubiquitous in homes and cars, plastic is now appearing inbridges. An academic-industrial consortium based at the University ofCalifornia in San Diego is launching a three-year research program aimed atdeveloping the world’s first plastic highway bridge, a 450-foot span madeentirely from glass-,carbon,and polymer-fiber-reinforced composite mate-rials, the stuff of military aircraft. It will cross Interstate 5 to connect thetwo sides of the school’s campus.

  7. A new classification scheme of plastic wastes based upon recycling labels

    Energy Technology Data Exchange (ETDEWEB)

    Özkan, Kemal, E-mail: kozkan@ogu.edu.tr [Computer Engineering Dept., Eskişehir Osmangazi University, 26480 Eskişehir (Turkey); Ergin, Semih, E-mail: sergin@ogu.edu.tr [Electrical Electronics Engineering Dept., Eskişehir Osmangazi University, 26480 Eskişehir (Turkey); Işık, Şahin, E-mail: sahini@ogu.edu.tr [Computer Engineering Dept., Eskişehir Osmangazi University, 26480 Eskişehir (Turkey); Işıklı, İdil, E-mail: idil.isikli@bilecik.edu.tr [Electrical Electronics Engineering Dept., Bilecik University, 11210 Bilecik (Turkey)

    2015-01-15

    Highlights: • PET, HPDE or PP types of plastics are considered. • An automated classification of plastic bottles based on the feature extraction and classification methods is performed. • The decision mechanism consists of PCA, Kernel PCA, FLDA, SVD and Laplacian Eigenmaps methods. • SVM is selected to achieve the classification task and majority voting technique is used. - Abstract: Since recycling of materials is widely assumed to be environmentally and economically beneficial, reliable sorting and processing of waste packaging materials such as plastics is very important for recycling with high efficiency. An automated system that can quickly categorize these materials is certainly needed for obtaining maximum classification while maintaining high throughput. In this paper, first of all, the photographs of the plastic bottles have been taken and several preprocessing steps were carried out. The first preprocessing step is to extract the plastic area of a bottle from the background. Then, the morphological image operations are implemented. These operations are edge detection, noise removal, hole removing, image enhancement, and image segmentation. These morphological operations can be generally defined in terms of the combinations of erosion and dilation. The effect of bottle color as well as label are eliminated using these operations. Secondly, the pixel-wise intensity values of the plastic bottle images have been used together with the most popular subspace and statistical feature extraction methods to construct the feature vectors in this study. Only three types of plastics are considered due to higher existence ratio of them than the other plastic types in the world. The decision mechanism consists of five different feature extraction methods including as Principal Component Analysis (PCA), Kernel PCA (KPCA), Fisher’s Linear Discriminant Analysis (FLDA), Singular Value Decomposition (SVD) and Laplacian Eigenmaps (LEMAP) and uses a simple

  8. Leaching of styrene and other aromatic compounds in drinking water from PS bottles

    Institute of Scientific and Technical Information of China (English)

    Maqbool Ahmad; Ahmad S.Bajahlan

    2007-01-01

    Bottled water may not be safer, or healthier, than tap water. The present studies have proved that styrene and some other aromatic compounds leach continuously from polystyrene (PS) bottles used locally for packaging. Water sapmles in contact with PS were extracted by a preconcentration technique called as "purge and trap" and analysed by gas chromatograph-mass spectrometer (GC/MS). Eleven aromatic compounds were identified in these studies. Maximum concentration of styrene in PS bottles was 29.5 μg/L. Apart from styrene, ethyl benzene, toluene and benzene were also quantified but their concentrations were much less than WHO guide line values. All other compounds were in traces. Quality of plastic and storage time were the major factor in leaching of styrene. Concentration of styrene was increased to 69.53 μg/L after one-year storage time. In Styrofoam and PS cups studies, hot water was found to be contaminated with styrene and other aromatic compounds. It was observed that temperature played a major role in the leaching of styrene monomer from Styrofoam cups. Paper cups were found to be safe for hot drinks.

  9. Feeding Bottles Usage and the Prevalence of Childhood Allergy and Asthma

    Directory of Open Access Journals (Sweden)

    Nai-Yun Hsu

    2012-01-01

    Full Text Available This study aimed to examine the association between the length of use of feeding bottles or pacifiers during childhood and the prevalence of respiratory and allergic morbidities. A large-scale questionnaire survey was performed in day care centers and kindergartens (with children’s ages ranging from 2 to 7 years in southern Taiwan, and a total of 14,862 questionnaires completed by parents were finally recruited for data analysis. Effects of using feeding bottles on children’s wheezing/asthma (adjusted OR: 1.05, 95% CI 1.00–1.09, allergic rhinitis (adjusted OR: 1.04, 95% CI 1.00–1.08, and eczema (adjusted OR: 1.07, 95% CI 1.01–1.2 were found. Moreover, significant dose-dependent relationships were further established after an adjustment for confounders was performed that included children’s ages, gender, gestational age, birth weight, length of breastfeeding, the age when first given infant formula or complementary foods, family history, parental educational levels, and smoking status, as well as the problem of indoor water damage. This study was the first to reveal the potential risk of using plastic consumer products such as feeding bottles on the reported health status of preschool children in Asian countries.

  10. Feeding bottles usage and the prevalence of childhood allergy and asthma.

    Science.gov (United States)

    Hsu, Nai-Yun; Wu, Pei-Chih; Bornehag, Carl-Gustaf; Sundell, Jan; Su, Huey-Jen

    2012-01-01

    This study aimed to examine the association between the length of use of feeding bottles or pacifiers during childhood and the prevalence of respiratory and allergic morbidities. A large-scale questionnaire survey was performed in day care centers and kindergartens (with children's ages ranging from 2 to 7 years) in southern Taiwan, and a total of 14,862 questionnaires completed by parents were finally recruited for data analysis. Effects of using feeding bottles on children's wheezing/asthma (adjusted OR: 1.05, 95% CI 1.00-1.09), allergic rhinitis (adjusted OR: 1.04, 95% CI 1.00-1.08), and eczema (adjusted OR: 1.07, 95% CI 1.01-1.2) were found. Moreover, significant dose-dependent relationships were further established after an adjustment for confounders was performed that included children's ages, gender, gestational age, birth weight, length of breastfeeding, the age when first given infant formula or complementary foods, family history, parental educational levels, and smoking status, as well as the problem of indoor water damage. This study was the first to reveal the potential risk of using plastic consumer products such as feeding bottles on the reported health status of preschool children in Asian countries.

  11. Entanglement entropy of squeezed vacua on a lattice

    CERN Document Server

    Bianchi, Eugenio; Yokomizo, Nelson

    2015-01-01

    We derive a formula for the entanglement entropy of squeezed states on a lattice in terms of the complex structure J. The analysis involves the identification of squeezed states with group-theoretical coherent states of the symplectic group and the relation between the coset Sp(2N,R)/Isot(J_0) and the space of complex structures. We present two applications of the new formula: (i) we derive the area law for the ground state of a scalar field on a generic lattice in the limit of small speed of sound, (ii) we compute the rate of growth of the entanglement entropy in the presence of an instability and show that it is bounded from above by the Kolmogorov-Sinai rate.

  12. The Achromatic Telescopic Squeezing (ATS) MD part II

    CERN Document Server

    Fartoukh, S; De Maria, R; Miyamoto, R; Mueller, G; Ponce, L; Redaelli, S; Strzelczyk, M; Tomas, R; Vanbavinckhove, G; Wenninger, J; Albert, M; Giachino, R; Giovannozzi, M; Goddard, B; Hagen, P; Hofle, W; Kain, V; Macpherson, A; Normann, L; Papotti, G; Steinhagen, R; Valuch, D; wollman, D

    2011-01-01

    This note describes the results obtained during the second so-called ATS MD where the record of Beta* was reached at IP1 and IP5 with a “pre-squeezed” Beta* of 1.2 m, while perfectly controlling the chromatic aberrations induced (non-linear chromaticity, off-momentum Beta-beating). Then, the ATLAS insertion was squeezed further down to the target of the former LHC Upgrade Project (Phase I), that is to Beta* = 30 cm, using the Achromatic Telescopic Squeezing techniques. In view of this major achievement, the bar is fixed even higher for the next ATS MD’s, with an ultimate Beta* targeted to 10 cm for the two high-luminosity insertions ATLAS and CMS.

  13. Coherent quantum squeezing due to the phase space noncommutativity

    CERN Document Server

    Bernardini, Alex E

    2015-01-01

    The effect of phase space general noncommutativity on producing deformed coherent squeezed states is examined. A two-dimensional noncommutative quantum system supported by a deformed mathematical structure similar to that of Hadamard billiards is obtained and their components behavior are monitored in time. It is assumed that the independent degrees of freedom are two \\emph{free} 1D harmonic oscillators (HO's), so the system Hamiltonian does not contain interaction terms. Through the noncommutative deformation parameterized by a Seiberg-Witten transform on the original canonical variables, one gets the standard commutation relations for the new ones, such that the obtained Hamiltonian represents then two \\emph{interacting} 1D HO's. By assuming that one HO is inverted relatively to the other, we show that their effective interaction induces a squeezing dynamics for initial coherent states imaged in the phase space. A suitable pattern of logarithmic spirals is obtained and some relevant properties are discussed...

  14. Improvement of an Atomic Clock using Squeezed Vacuum

    DEFF Research Database (Denmark)

    Kruse, I.; Lange, K; Peise, Jan;

    2016-01-01

    , the vacuum noise restricts the precision of the interferometer to the standard quantum limit (SQL). Here, we propose and experimentally demonstrate a novel clock configuration that surpasses the SQL by squeezing the vacuum in the empty input state. We create a squeezed vacuum state containing an average of 0.......75 atoms to improve the clock sensitivity of 10000 atoms by 2.05+0.34−0.37  dB. The SQL poses a significant limitation for today’s microwave fountain clocks, which serve as the main time reference. We evaluate the major technical limitations and challenges for devising a next generation of fountain clocks......Since the pioneering work of Ramsey, atom interferometers are employed for precision metrology, in particular to measure time and to realize the second. In a classical interferometer, an ensemble of atoms is prepared in one of the two input states, whereas the second one is left empty. In this case...

  15. Vibratile Coherence and Squeezing in Two Trapped Ions

    Institute of Scientific and Technical Information of China (English)

    ZENGHao-Sheng; KUANGLe-Man; 等

    2002-01-01

    It is shown that two trapped ions interacting with laser beams resonant to the first red side-band of center-of-mass mode,in Lamb-Dicke regime and under rotating wave approximation,is described by a Jaynes-Cummings model.For the initial condition that the motional state of center-of-mass mode is in vacuum state and the internal state is prepared in a coherent superposition of states,coherence and squeezing for the vibratile motion of center-of-mass mode are discussed,particularly,a“weak” coherent state and a “weak” squeezed vacuum state are obtained.Collapse and revival are also observed in this type of initial condition.

  16. Squeezing-enhanced feedback cooling of a microresonator

    DEFF Research Database (Denmark)

    Kerdoncuff, Hugo

    Since its inception, quantum mechanics have not ceased to fascinate the scientific world, and especially the fundamental question about the famous Schrödinger's cat being alive or dead, or both, is still far from being answered. Although superposition states have been achieved with small particle...... microtoroids. Secondly we model the dielectric gradient force actuation scheme and investigate its capabilities in controlling the vibrations of a microtoroid acoustic mode....... such oscillators into their quantum ground state. In the present work we investigate a cold damping scheme relying on the ultra-sensitive measurement of mechanical displacements, provided by a cavity-enhanced optomechanical interaction with quadrature squeezed states of light, to control strong dielectric gradient...... forces actuating the motion of a toroidal microresonator within a feedback loop. We first determine theoretically the conditions and limits to squeezing-enhanced measurement sensitivity of mechanical motion in a cavity optomechanical system, and perform experimentally a proof-of-principle on our...

  17. Deterministic Squeezed States with Joint Measurements and Feedback

    Science.gov (United States)

    Greve, Graham P.; Cox, Kevin C.; Wu, Baochen; Thompson, James K.

    2016-05-01

    Joint measurement of many qubits or atoms is a powerful way to create entanglement for precision measurement and quantum information science. However, the random quantum collapse resulting from the joint measurement also leads to randomness in which entangled state is created. We present an experiment in which we apply real-time feedback to eliminate the randomness generated during the joint measurement of 5 ×104 laser-cooled Rb atoms. The feedback effectively steers the quantum state to a desired squeezed state. After feedback, the final state achieves a directly observed phase resolution variance up to 7.4(6) dB below the standard quantum limit for unentangled atoms. The entanglement and improved measurement capability of these states can be realized without retaining knowledge of the joint measurement's outcome, possibly opening new applications for spin squeezed states generated via joint measurement.

  18. Quadrature-dependent Bogoliubov transformations and multiphoton squeezed states

    CERN Document Server

    De Siena, S; Illuminati, F; Siena, Silvio De; Lisi, Antonio Di; Illuminati, Fabrizio

    2001-01-01

    We introduce a linear, canonical transformation of the fundamental single--mode field operators $a$ and $a^{\\dagger}$ that generalizes the linear Bogoliubov transformation familiar in the construction of the harmonic oscillator squeezed states. This generalization is obtained by adding to the linear transformation a nonlinear function of any of the fundamental quadrature operators $X_{1}$ and $X_{2}$, making the original Bogoliubov transformation quadrature--dependent. Remarkably, the conditions of canonicity do not impose any constraint on the form of the nonlinear function, and lead to a set of nontrivial algebraic relations between the $c$--number coefficients of the transformation. We examine in detail the structure and the properties of the new quantum states defined as eigenvectors of the transformed annihilation operator $b$. These eigenvectors define a class of multiphoton squeezed states. The structure of the uncertainty products and of the quasiprobability distributions in phase space shows that bes...

  19. The Bose-Hubbard model with squeezed dissipation

    Science.gov (United States)

    Quijandría, Fernando; Naether, Uta; Porras, Diego; José García-Ripoll, Juan; Zueco, David

    2015-03-01

    The stationary properties of the Bose-Hubbard model under squeezed dissipation are investigated. The dissipative model does not possess a U(1) symmetry but conserves parity. We find that =0 always holds, so no symmetry breaking occurs. Without the onsite repulsion, the linear case is known to be critical. At the critical point the system freezes to an EPR state with infinite two mode entanglement. We show here that the correlations are rapidly destroyed whenever the repulsion is switched on. As we increase the latter, the system approaches a thermal state with an effective temperature defined in terms of the squeezing parameter in the dissipators. We characterize this transition by means of a Gutzwiller ansatz and the Gaussian Hartree-Fock-Bogoliubov approximation.

  20. Squeeze behaviors of magnetic powders between two parallel plates

    Science.gov (United States)

    Chen, Kaikai; Tian, Yu; Shan, Lei; Zhang, Xiangjun; Meng, Yonggang

    2014-10-01

    The dynamic compressive and static normal stresses of magnetic powders (MPs) with the constant volume squeezed between two parallel plates were experimentally studied. The compressive stress increased in a power law as the gap distance decreased, with an exponent range of -0.73 (0.04 T) to -2.63 (0.77 T). The values of the scale factor to normalize the compressive curves were mainly dominated by the applied magnetic field. The compressive behavior of the MPs showed a less significant velocity effect and initial gap distance effect than those of the magnetorheological (MR) and electrorheological (ER) fluids because of the absence of a host liquid. The compressive stress was generated by the serious particle aggregation, which was induced by a magnetic field and friction during compression. This study is designed to further the understanding of the behavior of smart ER/MR materials and the application of MP actuators in squeeze mode.

  1. The POLIS interferometer for ponderomotive squeezed light generation

    Science.gov (United States)

    Calloni, Enrico; Conte, Andrea; De Laurentis, Martina; Naticchioni, Luca; Puppo, Paola; Ricci, Fulvio

    2016-07-01

    POLIS (POnderomotive LIght Squeezer) is a suspended interferometer, presently under construction, devoted to the generation of ponderomotive squeezed light and to the study of the interaction of non classical quantum states of light and macroscopic objects. The interferometer is a Michelson whose half-meter long arms are constituted by high-finesse cavities, suspended to a seismic isolation chain similar to the Virgo SuperAttenuator. The mass of the suspended cavity mirrors are chosen to be tens of grams: this value is sufficiently high to permit the use of the well-tested Virgo suspension techniques but also sufficiently small to generate the coupling among the two phase quadratures with a limited amount of light in the cavity, of the order of few tens of kW. In this short paper the main features of the interferometer are shown, together with the expected sensitivity and squeezing factor.

  2. QUANTUM MECHANICS. Quantum squeezing of motion in a mechanical resonator.

    Science.gov (United States)

    Wollman, E E; Lei, C U; Weinstein, A J; Suh, J; Kronwald, A; Marquardt, F; Clerk, A A; Schwab, K C

    2015-08-28

    According to quantum mechanics, a harmonic oscillator can never be completely at rest. Even in the ground state, its position will always have fluctuations, called the zero-point motion. Although the zero-point fluctuations are unavoidable, they can be manipulated. Using microwave frequency radiation pressure, we have manipulated the thermal fluctuations of a micrometer-scale mechanical resonator to produce a stationary quadrature-squeezed state with a minimum variance of 0.80 times that of the ground state. We also performed phase-sensitive, back-action evading measurements of a thermal state squeezed to 1.09 times the zero-point level. Our results are relevant to the quantum engineering of states of matter at large length scales, the study of decoherence of large quantum systems, and for the realization of ultrasensitive sensing of force and motion.

  3. The POLIS interferometer for ponderomotive squeezed light generation

    Energy Technology Data Exchange (ETDEWEB)

    Calloni, Enrico [Dipartimento di Fisica, Università degli Studi di Napoli “Federico II”, Napoli (Italy); INFN, Sezione di Napoli (Italy); Conte, Andrea [Dipartimento di Fisica, Università di Roma “Sapienza”, Roma (Italy); INFN, Sezione di Roma1 (Italy); De Laurentis, Martina, E-mail: martina.delaurentis@na.infn.it [Dipartimento di Fisica, Università degli Studi di Napoli “Federico II”, Napoli (Italy); INFN, Sezione di Napoli (Italy); Naticchioni, Luca [Dipartimento di Fisica, Università di Roma “Sapienza”, Roma (Italy); INFN, Sezione di Roma1 (Italy); Puppo, Paola [INFN, Sezione di Roma1 (Italy); Ricci, Fulvio [Dipartimento di Fisica, Università di Roma “Sapienza”, Roma (Italy); INFN, Sezione di Roma1 (Italy)

    2016-07-11

    POLIS (POnderomotive LIght Squeezer) is a suspended interferometer, presently under construction, devoted to the generation of ponderomotive squeezed light and to the study of the interaction of non classical quantum states of light and macroscopic objects. The interferometer is a Michelson whose half-meter long arms are constituted by high-finesse cavities, suspended to a seismic isolation chain similar to the Virgo SuperAttenuator. The mass of the suspended cavity mirrors are chosen to be tens of grams: this value is sufficiently high to permit the use of the well-tested Virgo suspension techniques but also sufficiently small to generate the coupling among the two phase quadratures with a limited amount of light in the cavity, of the order of few tens of kW. In this short paper the main features of the interferometer are shown, together with the expected sensitivity and squeezing factor.

  4. Entanglement dynamics of bipartite system in squeezed vacuum reservoirs

    CERN Document Server

    Bougouffa, Smail

    2010-01-01

    Entanglement plays a crucial role in quantum information protocols, thus the dynamical behavior of entangled states is of a great importance. In this paper we suggest a useful scheme that permits a direct measure of entanglement in a two-qubit cavity system. It is realized in the cavity-QED technology utilizing atoms as fying qubits. To quantify entanglement we use the concurrence. We derive the conditions, which assure that the state remains entangled in spite of the interaction with the reservoir. The phenomenon of sudden death entanglement (ESD) in a bipartite system subjected to squeezed vacuum reservoir is examined. We show that the sudden death time of the entangled states depends on the initial preparation of the entangled state and the parameters of the squeezed vacuum reservoir.

  5. Entanglement dynamics of a bipartite system in squeezed vacuum reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Bougouffa, Smail [Department of Physics, Faculty of Science, Taibah University, PO Box 30002, Madinah (Saudi Arabia); Hindi, Awatif, E-mail: sbougouffa@taibahu.edu.sa, E-mail: sbougouffa@hotmail.com [Physics Department, College of Science, PO Box 22452, King Saud University, Riyadh 11495 (Saudi Arabia)

    2011-02-15

    Entanglement plays a crucial role in quantum information protocols; thus the dynamical behavior of entangled states is of great importance. In this paper, we suggest a useful scheme that permits a direct measure of entanglement in a two-qubit cavity system. It is realized through cavity-QED technology utilizing atoms as flying qubits. To quantify entanglement we use the concurrence. We derive the conditions that ensure that the state remains entangled in spite of the interaction with the reservoir. The phenomenon of entanglement sudden death in a bipartite system subjected to a squeezed vacuum reservoir is examined. We show that the sudden death time of the entangled states depends on the initial preparation of the entangled state and the parameters of the squeezed vacuum reservoir.

  6. Quantum memory for entangled two-mode squeezed states

    CERN Document Server

    Jensen, K; Krauter, H; Fernholz, T; Nielsen, B M; Serafini, A; Owari, M; Plenio, M B; Wolf, M M; Polzik, E S

    2010-01-01

    A quantum memory for light is a key element for the realization of future quantum information networks. Requirements for a good quantum memory are (i) versatility (allowing a wide range of inputs) and (ii) true quantum coherence (preserving quantum information). Here we demonstrate such a quantum memory for states possessing Einstein-Podolsky-Rosen (EPR) entanglement. These multi-photon states are two-mode squeezed by 6.0 dB with a variable orientation of squeezing and displaced by a few vacuum units. This range encompasses typical input alphabets for a continuous variable quantum information protocol. The memory consists of two cells, one for each mode, filled with cesium atoms at room temperature with a memory time of about 1msec. The preservation of quantum coherence is rigorously proven by showing that the experimental memory fidelity 0.52(2) significantly exceeds the benchmark of 0.45 for the best possible classical memory for a range of displacements.

  7. GREEN PLASTIC: A NEW PLASTIC FOR PACKAGING

    OpenAIRE

    Mr. Pankaj Kumar*, Sonia

    2016-01-01

    This paper gives a brief idea about a new type of plastic called as bio-plastic or green plastic. Plastic is used as a packaging material for various products, but this plastic is made up of non renewable raw materials. There are various disadvantages of using conventional plastic like littering, CO2 production, non-degradable in nature etc. To overcome these problems a new type of plastic is discovered called bio-plastic or green plastic. Bio-plastic is made from renewable resources and also...

  8. Coherent states and squeezed states, supercoherent states and supersqueezed states

    CERN Document Server

    Nieto, Michael Martin

    1992-01-01

    This article reports on a program to obtain and understand coherent states for general systems. Most recently this has included supersymmetric systems. A byproduct of this work has been studies of squeezed and supersqueezed states. To obtain a physical understanding of these systems has always been a primary goal. In particular, in the work on supersymmetry an attempt to understand the role of Grassmann numbers in quantum mechanics has been initiated.

  9. Third International Workshop on Squeezed States and Uncertainty Relations

    Science.gov (United States)

    Han, D. (Editor); Kim, Y. S. (Editor); Rubin, Morton H. (Editor); Shih, Yan-Hua (Editor); Zachary, Woodford W. (Editor)

    1994-01-01

    The purpose of these workshops is to bring together an international selection of scientists to discuss the latest developments in Squeezed States in various branches of physics, and in the understanding of the foundations of quantum mechanics. At the third workshop, special attention was given to the influence that quantum optics is having on our understanding of quantum measurement theory. The fourth meeting in this series will be held in the People's Republic of China.

  10. Sixth International Conference on Squeezed States and Uncertainty Relations

    Science.gov (United States)

    Han, D. (Editor); Kim, Y. S. (Editor); Solimento, S. (Editor)

    2000-01-01

    These proceedings contain contributions from about 200 participants to the 6th International Conference on Squeezed States and Uncertainty Relations (ICSSUR'99) held in Naples May 24-29, 1999, and organized jointly by the University of Naples "Federico II," the University of Maryland at College Park, and the Lebedev Institute, Moscow. This was the sixth of a series of very successful meetings started in 1990 at the College Park Campus of the University of Maryland. The other meetings in the series were held in Moscow (1992), Baltimore (1993), Taiyuan P.R.C. (1995) and Balatonfuered, Hungary (1997). The present one was held at the campus Monte Sant'Angelo of the University "Federico II" of Naples. The meeting sought to provide a forum for updating and reviewing a wide range of quantum optics disciplines, including device developments and applications, and related areas of quantum measurements and quantum noise. Over the years, the ICSSUR Conference evolved from a meeting on quantum measurement sector of quantum optics, to a wide range of quantum optics themes, including multifacet aspects of generation, measurement, and applications of nonclassical light (squeezed and Schrodinger cat radiation fields, etc.), and encompassing several related areas, ranging from quantum measurement to quantum noise. ICSSUR'99 brought together about 250 people active in the field of quantum optics, with special emphasis on nonclassical light sources and related areas. The Conference was organized in 8 Sections: Squeezed states and uncertainty relations; Harmonic oscillators and squeeze transformations; Methods of quantum interference and correlations; Quantum measurements; Generation and characterisation of non-classical light; Quantum noise; Quantum communication and information; and Quantum-like systems.

  11. An Experimental Study on Steel and Teflon Squeeze Film Dampers

    Directory of Open Access Journals (Sweden)

    Asad A. Khalid

    2006-01-01

    Full Text Available In this paper, the vibration analysis on Teflon and steel squeeze film dampers has been carried out. At different frequency ranges, vibration amplitude and the resonance frequency are measured. The eccentricity ratio at resonance speed has been determined. Results show that the vibration amplitude of the steel damper is 10% less at resonance compared with the Teflon damper. On the other hand, saving weight of 36% has been achieved by using the Teflon damper.

  12. Unconditional two-mode squeezing of separated atomic ensembles

    CERN Document Server

    Parkins, A S; Solano, E

    2005-01-01

    We propose schemes for the unconditional preparation of a two-mode squeezed state of effective bosonic modes realized in a pair of atomic ensembles interacting collectively with optical cavity and laser fields. The scheme uses Raman transitions between stable atomic ground states and under ideal conditions produces pure entangled states in the steady state. The scheme works both for ensembles confined within a single cavity and for ensembles confined in separate, cascaded cavities.

  13. Roughness effect on squeeze film pressure

    Indian Academy of Sciences (India)

    Manju Shukla

    2002-10-01

    The Stokes equations for the axial symmetric slow motion generated by a plane, approaching towards a solid surface allowing slippage, have been solved in this paper by using finite Hankel transform. The squeeze film pressure between the two rigid faces is then obtained. It is found that the roughness parameter $\\beta \\sim d/4$, where is the separation between the two surfaces, causes an extremely high pressure on the surface.

  14. beta* leveling with telescopic ATS squeeze (MD 2410)

    CERN Document Server

    Wenninger, Jorg; Hostettler, Michi; Pojer, Mirko; Ponce, Laurette; Tydecks, Tobias; CERN. Geneva. ATS Department

    2017-01-01

    Luminosity leveling by beta* is the baseline operational scenario of HL-LHC, and this leveling technique may be used in 2018 or during run~3 depending on the beam parameters and beta* range. During this MD beta*leveling was commissioned successfully for the first time with the telescopic squeeze over the beta* range of 40 cm to 30 cm. A novel beta* leveling controls technique based on a modification of the LSA trim was also tested during the MD.

  15. Experimental demonstration of coherent feedback control on optical field squeezing

    CERN Document Server

    Iida, Sanae; Yonezawa, Hidehiro; Yamamoto, Naoki; Furusawa, Akira

    2011-01-01

    Coherent feedback is a non-measurement based, hence a back-action free, method of control for quantum systems. A typical application of this control scheme is squeezing enhancement, a purely non-classical effect in quantum optics. In this paper we report its first experimental demonstration that well agrees with the theory taking into account time delays and losses in the coherent feedback loop. The results clarify both the benefit and the limitation of coherent feedback control in a practical situation.

  16. Noncritical quadrature squeezing through spontaneous polarization symmetry breaking

    CERN Document Server

    Garcia-Ferrer, Ferran V; de Valcárcel, Germán J; Roldán, Eugenio

    2010-01-01

    We discuss the possibility of generating noncritical quadrature squeezing by spontaneous polarization symmetry breaking. We consider first type-II frequency-degenerate optical parametric oscillators, but discard them for a number of reasons. Then we propose a four-wave mixing cavity in which the polarization of the output mode is always linear but has an arbitrary orientation. We show that in such a cavity complete noise suppression in a quadrature of the output field occurs, irrespective of the parameter values.

  17. China's marriage squeeze: A decomposition into age and sex structure.

    Science.gov (United States)

    Jiang, Quanbao; Li, Xiaomin; Li, Shuzhuo; Feldman, Marcus W

    2016-06-01

    Most recent studies of marriage patterns in China have emphasized the male-biased sex ratio but have largely neglected age structure as a factor in China's male marriage squeeze. In this paper we develop an index we call "spousal sex ratio" (SSR) to measure the marriage squeeze, and a method of decomposing the proportion of male surplus into age and sex structure effects within a small spousal age difference interval. We project that China's marriage market will be confronted with a relatively severe male squeeze. For the decomposition of the cohort aged 30, from 2010 to 2020 age structure will be dominant, while from 2020 through 2034 the contribution of age structure will gradually decrease and that of sex structure will increase. From then on, sex structure will be dominant. The index and decomposition, concentrated on a specific female birth cohort, can distinguish spousal competition for single cohorts which may be covered by a summary index for the whole marriage market; these can also be used for consecutive cohorts to reflect the situation of the whole marriage market.

  18. Analytical solutions for squeeze flow with partial wall slip

    DEFF Research Database (Denmark)

    Laun, HM; Rady, M; Hassager, Ole

    1999-01-01

    Squeeze flow between parallel plates of a purely viscous material is considered for small gaps both for a Newtonian and power law fluid with partial wall slip. The results for the squeeze force as a function of the squeezing speed reduce to the Stefan and Scott equations in the no slip limit......, respectively. The slip velocity at the plate increases linearly with the radius up to the rim slip velocity upsilon(s). For small Saps H, the resulting apparent Newtonian rim shear rate-measured for a constant rim shear stress, i.e. an imposed force increasing proportional to 1/H-yields a straight line...... if plotted versus 1/H. The slope of the straight line is equal to 6 upsilon(s) whereas the intersect with the ordinate yields the effective Newtonian rim shear rate to be converted into the true rim shear rate by means of the power law exponent. The advantage of the new technique is the separation of bulk...

  19. Two-axis-twisting spin squeezing by multipass quantum erasure

    Science.gov (United States)

    Wang, Mingfeng; Qu, Weizhi; Li, Pengxiong; Bao, Han; Vuletić, Vladan; Xiao, Yanhong

    2017-07-01

    Many-body entangled states are key elements in quantum information science and quantum metrology. One important problem in establishing a high degree of many-body entanglement using optical techniques is the leakage of the system information via the light that creates such entanglement. We propose an all-optical interference-based approach to erase this information. Unwanted atom-light entanglement can be removed by destructive interference of three or more successive atom-light interactions, leaving behind only atom-atom entanglement. This quantum erasure protocol allows implementation of spin squeezing with Heisenberg scaling using coherent light and a cold or warm atomic ensemble. Calculations show that a significant improvement in the squeezing exceeding 10 dB is obtained compared to previous methods, and substantial spin squeezing is attainable even under moderate experimental conditions. Our method enables the efficient creation of many-body entangled states with simple setups and, thus, is promising for advancing technologies in quantum metrology and quantum information processing.

  20. Squeezing of X waves with orbital angular momentum

    Science.gov (United States)

    Ornigotti, Marco; Villari, Leone Di Mauro; Szameit, Alexander; Conti, Claudio

    2017-01-01

    Multilevel quantum protocols may potentially supersede standard quantum optical polarization-encoded protocols in terms of amount of information transmission and security. However, for free-space telecommunications, we do not have tools for limiting loss due to diffraction and perturbations, as, for example, turbulence in air. Here we study propagation invariant quantum X waves with angular momentum; this representation expresses the electromagnetic field as a quantum gas of weakly interacting bosons. The resulting spatiotemporal quantized light pulses are not subject to diffraction and dispersion, and are intrinsically resilient to disturbances in propagation. We show that spontaneous down-conversion generates squeezed X waves useful for quantum protocols. Surprisingly, the orbital angular momentum affects the squeezing angle, and we predict the existence of a characteristic axicon aperture for maximal squeezing. These results may boost the applications in free space of quantum optical transmission and multilevel quantum protocols, and may also be relevant for novel kinds of interferometers, such as satellite-based gravitational wave detectors.

  1. Single qubit operations with base squeezed coherent states

    Science.gov (United States)

    Podoshvedov, Sergey A.

    2013-03-01

    In quantum computing with base either coherent or squeezed coherent states, information is encoded into coherent states with opposite amplitudes. To exploit the base states in quantum computation, we need arbitrary qubit rotations plus a two-qubit gate such as controlled-Z gate to simulate any multiqubit unitary transformations. We develop an approach to realize single qubit operations with the base squeezed coherent states. The optical setup requires a resource of the base squeezed coherent states, unbalanced beam splitter whose transmittance tends to unity and photon counters in auxiliary modes. A successful two-photon subtraction from transmitted beam is heralded by two-photon click in auxiliary modes where tiny part of the initial beam is detected. The thrust of the method is that it achieves a high fidelity without photodetectors with a high efficiency or a single-photon resolution. We observe that there is wide diapason of values of the parameters that provide performance of single qubit operations with the base states. The problem is resolved in Wigner representation to take into account imperfections of the optical devices.

  2. A squeezed light source operated under high vacuum

    Science.gov (United States)

    Wade, Andrew R.; Mansell, Georgia L.; Chua, Sheon S. Y.; Ward, Robert L.; Slagmolen, Bram J. J.; Shaddock, Daniel A.; McClelland, David E.

    2015-01-01

    Non-classical squeezed states of light are becoming increasingly important to a range of metrology and other quantum optics applications in cryptography, quantum computation and biophysics. Applications such as improving the sensitivity of advanced gravitational wave detectors and the development of space-based metrology and quantum networks will require robust deployable vacuum-compatible sources. To date non-linear photonics devices operated under high vacuum have been simple single pass systems, testing harmonic generation and the production of classically correlated photon pairs for space-based applications. Here we demonstrate the production under high-vacuum conditions of non-classical squeezed light with an observed 8.6 dB of quantum noise reduction down to 10 Hz. Demonstration of a resonant non-linear optical device, for the generation of squeezed light under vacuum, paves the way to fully exploit the advantages of in-vacuum operations, adapting this technology for deployment into new extreme environments. PMID:26657616

  3. Multipass configuration for improved squeezed vacuum generation in hot Rb vapor

    Science.gov (United States)

    Zhang, Mi; Guidry, Melissa A.; Lanning, R. Nicholas; Xiao, Zhihao; Dowling, Jonathan P.; Novikova, Irina; Mikhailov, Eugeniy E.

    2017-07-01

    We study a squeezed vacuum field generated in hot Rb vapor via the polarization self-rotation effect. Our previous experiments showed that the amount of observed squeezing may be limited by the contamination of the squeezed vacuum output with higher-order spatial modes, also generated inside the cell. Here, we demonstrate that the squeezing can be improved by making the light interact several times with a less dense atomic ensemble. With optimization of some parameters we can achieve up to -2.6 dB of squeezing in the multipass case, which is a 0.6 dB improvement compared to the single-pass experimental configuration. Our results show that, other than the optical depth of the medium, the spatial mode structure and the cell configuration also affect the squeezing level.

  4. Effect of Squeezing on the Atomic and the Entanglement Dynamics in the Jaynes-Cummings Model

    CERN Document Server

    Subeesh, T; Ahmed, A B M; Satyanarayana, M Venkata

    2012-01-01

    The dynamics of the Jaynes-Cummings interaction of a two-level atom interacting with a single mode of the radiation field is investigated, as the state of the field is gradually changed from a coherent state to a squeezed coherent state. The effect of mild squeezing on the coherent light is shown to be striking: the photon number distribution gets localized and it peaks maximally for a particular value of squeezing. The atomic inversion retains its structure for a longer time. The mean linear entropy shows that the atom has a tendency to get disentangled from field within the collapse region and also in the revival region, for mild squeezing. These properties are absent for the case of a coherent state or for an excessively squeezed coherent state. We also elucidate a connection between these properties and the photon statistics of the mildly squeezed coherent state; these states have the minimum variance and are also maximally sub-Poissonian.

  5. Information Entropy Squeezing of a Two-Level Atom Interacting with Two-Mode Coherent Fields

    Institute of Scientific and Technical Information of China (English)

    LIU Xiao-Juan; FANG Mao-Fa

    2004-01-01

    From a quantum information point of view we investigate the entropy squeezing properties for a two-level atom interacting with the two-mode coherent fields via the two-photon transition. We discuss the influences of the initial state of the system on the atomic information entropy squeezing. Our results show that the squeezed component number,squeezed direction, and time of the information entropy squeezing can be controlled by choosing atomic distribution angle,the relative phase between the atom and the two-mode field, and the difference of the average photon number of the two field modes, respectively. Quantum information entropy is a remarkable precision measure for the atomic squeezing.

  6. Continuous-wave non-classical light with GHz squeezing bandwidth

    CERN Document Server

    Ast, Stefan; Mehmet, Moritz; Steinlechner, Sebastian; Eberle, Tobias; Schnabel, Roman

    2012-01-01

    Squeezed states can be employed for entanglement-based continuous-variable quantum key distribution, where the secure key rate is proportional to the bandwidth of the squeezing. We produced a non-classical continuous-wave laser field at the telecommunication wavelength of 1550 nm, which showed squeezing over a bandwidth of more than 2 GHz. The experimental setup used parametric down-conversion via a periodically poled potassium titanyl phosphate crystal (PPKTP). We did not use any resonant enhancement for the funda- mental wavelength, which should in principle allow a production of squeezed light over the full phase-matching bandwidth of several nanometers. We measured the squeezing to be up to 0.3 dB below the vacuum noise from 50 MHz to 2 GHz limited by the measuring bandwidth of the homodyne detector. The squeezing strength was possibly limited by thermal lensing inside the non-linear crystal.

  7. Spin Squeezing of Atomic Ensembles via Nuclear-Electronic Spin Entanglement

    DEFF Research Database (Denmark)

    Fernholz, Thomas; Krauter, Hanna; Jensen, K.

    2008-01-01

    We demonstrate spin squeezing in a room temperature ensemble of ≈1012 cesium atoms using their internal structure, where the necessary entanglement is created between nuclear and electronic spins of each individual atom. This state provides improvement in measurement sensitivity beyond the standard...... quantum limit for quantum memory experiments and applications in quantum metrology and is thus a complementary alternative to spin squeezing obtained via interatom entanglement. Squeezing of the collective spin is verified by quantum state tomography....

  8. Spin Squeezing and Entanglement of Many-Particle Spin-Half States

    Institute of Scientific and Technical Information of China (English)

    YAN Dong; WANG Xiao-Guang; WU Ling-An

    2005-01-01

    @@ In many-particle spin-half systems with exchange symmetry, we find that the spin squeezing is related to two types of entanglement, the bipartite and the pairwise entanglement. A quantitative relationship is revealed for the spin squeezing parameter, the tangle, and the concurrence. We find that a class of states is spin squeezed if the pairwise entanglement is stronger than the bipartite entanglement.

  9. Entanglement dynamics of non-interacting two-qubit system under a squeezed vacuum environment

    Institute of Scientific and Technical Information of China (English)

    Jun Qian; Xunli Feng; Shangqing Gong

    2007-01-01

    Entanglement dynamics of two non-interacting atoms in a squeezed vacuum reservoir is studied. Several examples with different initial entangled states are investigated, and it is found that entangled atoms become disentangled faster in squeezed vacuum than in ordinary vacuum, and larger squeezing results in faster entanglement decay. The time evolution of the concurrence and the separability "distance" A can be used to explain this novel entanglement sudden death phenomenon.

  10. Preparation of Motional Mesoscopic Superpositions of Squeezed Coherent States of N Trapped Ions

    Institute of Scientific and Technical Information of China (English)

    YANG Wen-Xing; XIE Xiao-Tao; LI Jia-Hua; CHEN Chang-Yong

    2005-01-01

    A scheme is proposed to generate arbitrary, discrete superpostions of squeezed coherent states of the squeezed center of mass of N trapped ions along a straight line in phase space. The scheme is based on a resonant bichromatic excitation of each trapped ion that generates displacement and squeezing in the vibrational motion conditioned to each internal state. In this paper, we also show that such a method can be used for the engineering of motional quantum states.

  11. Spin Squeezing of Atomic Ensembles via Nuclear-Electronic Spin Entanglement

    DEFF Research Database (Denmark)

    Fernholz, Thomas; Krauter, Hanna; Jensen, K.;

    2008-01-01

    We demonstrate spin squeezing in a room temperature ensemble of ≈1012 cesium atoms using their internal structure, where the necessary entanglement is created between nuclear and electronic spins of each individual atom. This state provides improvement in measurement sensitivity beyond the standard...... quantum limit for quantum memory experiments and applications in quantum metrology and is thus a complementary alternative to spin squeezing obtained via interatom entanglement. Squeezing of the collective spin is verified by quantum state tomography....

  12. Symplectic Group Representation of the Two-Mode Squeezing Operator in the Coherent State Basis

    Institute of Scientific and Technical Information of China (English)

    FAN Hong-Yi; CHEN Jun-Hua

    2003-01-01

    We find that the coherent state projection operator representation of the two-mode squeezing operator constitutes a loyal group representation of symplectic group, which is a remarkable property of the coherent state. As a consequence, the resultant effect of successively applying two-mode squeezing operators are equivalent to a single squeezing in the two-mode Fock space. Generalization of this property to the 2n-mode case is also discussed.

  13. Security of quantum key distribution using two-mode squeezed states against optimal beam splitter attack

    Institute of Scientific and Technical Information of China (English)

    He Guang-Qiang; Zhu Si-Wei; Guo Hong-Bin; Zeng Gui-Hua

    2008-01-01

    For the beam splitter attack strategy against quantum key distribution using two-mode squeezed states, the analytical expression of the optimal beam splitter parameter is provided in this paper by applying the Shannon information theory. The theoretical secret information rate after error correction and privacy amplification is given in terms of the squeezed parameter and channel parameters. The results show that the two-mode squeezed state quantum key distribution is secure against an optimal beam splitter attack.

  14. Black holes with bottle-shaped horizons

    CERN Document Server

    Chen, Yu

    2016-01-01

    We present a new class of four-dimensional AdS black holes with non-compact event horizons of finite area. The event horizons are topologically spheres with one puncture, with the puncture pushed to infinity in the form of a cusp. Because of the shape of their event horizons, we call such black holes "black bottles". The solution was obtained as a special case of the Plebanski-Demianski solution, and may describe either static or rotating black bottles. For certain ranges of parameters, an acceleration horizon may also appear in the space-time. We study the full parameter space of the solution, and the various limiting cases that arise. In particular, we show how the rotating black hole recently discovered by Klemm arises as a special limit.

  15. Isolation of Leptospira from blood culture bottles.

    Science.gov (United States)

    Girault, Dominique; Soupé-Gilbert, Marie-Estelle; Geroult, Sophie; Colot, Julien; Goarant, Cyrille

    2017-01-31

    With the increasing use of real-time PCR techniques, Leptospira isolation has mostly been abandoned for the diagnosis of human leptospirosis. However, there is a great value of collecting Leptospira isolates to better understand the epidemiology of this complex zoonosis and to provide the researchers with different isolates. In this study, we have successfully isolated different Leptospira strains from BacT/Alert aerobic blood culture bottles and suggest that this privileged biological material offers an opportunity to isolate leptospires.

  16. Recall campaign for gas bottles and banks

    CERN Multimedia

    2015-01-01

    The previous contract with gas supplier Carbagas ended on 31 March 2015. Gas bottles and banks are not a property of CERN. According to the contract terms, they can remain on CERN sites without any extra costs until 30 September 2015.    If you are using Carbagas containers (bottles and/or banks) for gas purchased between 1 April 2010 and 31 March 2015, multiple options exist: Return them to the closest gas point. Purchase them on the following basis:     Rent them on the following basis: 12 CHF/month for bottles, 144 CHF/month for banks. The recall campaign has been going on for several months already: we would like to thank everyone who has already replied to it. If you haven’t answered yet, there is still time. If you know of unused or abandoned Carbagas containers, please don’t hesitate to contact us. Thank you i...

  17. Bell's Inequalities for Continuous-Variable Systems in Generic Squeezed States

    CERN Document Server

    Martin, Jerome

    2016-01-01

    Bell's inequality for continuous-variable bipartite systems is studied. The inequality is expressed in terms of pseudo-spin operators and quantum expectation values are calculated for generic two-mode squeezed states characterized by a squeezing parameter $r$ and a squeezing angle $\\varphi$. Allowing for generic values of the squeezing angle is especially relevant when $\\varphi$ is not under experimental control, such as in cosmic inflation, where small quantum fluctuations in the early Universe are responsible for structures formation. Compared to previous studies restricted to $\\varphi=0$ and to a fixed orientation of the pseudo-spin operators, allowing for $\\varphi\

  18. Optimization of Squeeze Casting Parameters for 2017 A Wrought Al Alloy Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Najib Souissi

    2014-04-01

    Full Text Available This study applies the Taguchi method to investigate the relationship between the ultimate tensile strength, hardness and process variables in a squeeze casting 2017 A wrought aluminium alloy. The effects of various casting parameters including squeeze pressure, melt temperature and die temperature were studied. Therefore, the objectives of the Taguchi method for the squeeze casting process are to establish the optimal combination of process parameters and to reduce the variation in quality between only a few experiments. The experimental results show that the squeeze pressure significantly affects the microstructure and the mechanical properties of 2017 A Al alloy.

  19. Hamiltonian models of multiphoton processes and four--photon squeezed states via nonlinear canonical transformations

    CERN Document Server

    De Siena, S; Illuminati, F; Siena, Silvio De; Lisi, Antonio Di; Illuminati, Fabrizio

    2002-01-01

    We introduce nonlinear canonical transformations that yield effective Hamiltonians of multiphoton down conversion processes, and we define the associated non-Gaussian multiphoton squeezed states as the coherent states of the multiphoton Hamiltonians. We study in detail the four-photon processes and the associated non-Gaussian four-photon squeezed states. The realization of squeezing, the behavior of the field statistics, and the structure of the phase space distributions show that these states realize a natural four-photon generalization of the two-photon squeezed states.

  20. Manipulation of Squeezed Two-Phonon Bound States using Femtosecond Laser Pulses

    Directory of Open Access Journals (Sweden)

    Nakamura Kazutaka G.

    2013-03-01

    Full Text Available Two-phonon bound states have been excited exclusively in ZnTe(110 via impulsive stimulated second-order Raman scattering, essentially being squeezed states due to phase coherent excitation of two identical components anticorrelated in the wave vector. By using coherent control technique with a pair of femtosecond laser pulses, the manipulation of squeezed states has been demonstrated in which both the amplitude and lifetime of coherent oscillations of squeezed states are modulated, indicating the feasibility to control the quantum noise and the quantum nature of phonon squeezed states, respectively.

  1. A gravitational wave detector operating beyond the quantum shot-noise limit: Squeezed light in application

    Directory of Open Access Journals (Sweden)

    Schnabel Roman

    2013-08-01

    Full Text Available This contribution reviews our recent progress on the generation of squeezed light [1], and also the recent squeezed-light enhancement of the gravitational wave detector GEO 600 [2]. GEO 600 is currently the only GW observatory operated by the LIGO Scientific Collaboration in its search for gravitational waves. With the help of squeezed states of light it now operates with its best ever sensitivity, which not only proves the qualification of squeezed light as a key technology for future gravitational wave astronomy but also the usefulness of quantum entanglement.

  2. Property Characteristics of a TiB2P/AI Composite Fabricated by Squeeze Casting Technology

    Institute of Scientific and Technical Information of China (English)

    Min ZHAO; Gaohui WU; Zuoyong DOU; Longtao JIANG

    2006-01-01

    TiB2P/Al composite was successfully fabricated by squeeze casting technology. Its mechanical and tribological properties were evaluated. The elimination of Ti-Al intermetallic compound was confirmed by X-ray diffraction (XRD) studies. At 45% volume fraction, the bending strength at ambient temperature was 934 MPa. And the fracture modes included ductile failure of Al matrix and brittle fracture of TiB2 particles. In dry sliding wear mode, severe plastic deformation and adhesive wear were found on the worn surfaces of the SiCP/Alcomposite. But no obvious characteristics of adhesion or abrasion wear were observed on that of the TiB2P/Al composites. At the steady stage, the friction coefficient of the SiCP/Al composite was about 0.6. While that of TiB2P/Al composite was only about 0.16~0.17.

  3. Plastic condoms.

    Science.gov (United States)

    1968-01-01

    Only simple equipment, simple technology and low initial capital investment are needed in their manufacture. The condoms can be made by people who were previously unskilled or only semi-skilled workers. Plastic condoms differ from those made of latex rubber in that the nature of the plastic film allows unlimited shelf-life. Also, the plastic has a higher degree of lubricity than latex rubber; if there is a demand for extra lubrication in a particular market, this can be provided. Because the plastic is inert, these condoms need not be packaged in hermetically sealed containers. All these attributes make it possible to put these condoms on the distributors' shelves in developing countries competitively with rubber condoms. The shape of the plastic condom is based on that of the lamb caecum, which has long been used as luxury-type condom. The plastic condom is made from plastic film (ethylene ethyl acrilate) of 0.001 inch (0.0254 mm.) thickness. In addition, a rubber ring is provided and sealed into the base of the condom for retention during coitus. The advantage of the plastic condom design and the equipment on which it is made is that production can be carried out either in labour-intensive economy or with varying degrees of mechanization and automation. The uniform, finished condom if made using previously untrained workers. Training of workers can be done in a matter of hours on the two machines which are needed to produce and test the condoms. The plastic film is provided on a double wound roll, and condom blanks are prepared by means of a heat-sealing die on the stamping machine. The rubber rings are united to the condom blanks on an assembly machine, which consists of a mandrel and heat-sealing equipment to seal the rubber ring to the base of the condom. Built into the assembly machine is a simple air-testing apparatus that can detect the smallest pinhole flaw in a condom. The manufacturing process is completed by unravelling the condom from the assembly

  4. ZL105合金挤压铸造工艺研究%Mechanical Properties of Squeezing Casting ZL105 Alloy

    Institute of Scientific and Technical Information of China (English)

    张会

    2012-01-01

    ZL105 alloy was prepared with ZL102 alloy, pure aluminum, copper plate and Mg ingot. Effects of processing parameters on the mechanical properties and microstructure of squeezing castings were investigated by orthogonal testing. The results show that the influencing factors on strength of the squeezing castings are as follows: pouring temperature, holding time, pressure, and dominant factors on plasticity is pouring temperature. The dominant factor influencing mechanical properties and microstructure of the squeezing castings is pouring temperature. Tensile strength of the permanent mold castings after heat treatment reaches 225. 0 MPa, while tensile strength of squeezing casting after heat treatment reaches 249. 8 MPa, improved by 11. 0%.%以ZL102、纯铝、铜板、镁块为原材料熔配成ZL105合金.采用正交试验方法研究ZL105合金挤压铸造工艺参数对成型件力学性能和显微组织的影响.结果表明,挤压铸造工艺参数对合金强度影响的程度大小依次为:合金浇注温度、保压时间、比压;对塑性影响最大的是合金浇注温度.合金浇注温度是对铸件的性能和显微组织影响最为显著的因素.金属型铸件热处理后的抗拉强度为225.0 MPa,挤压铸件热处理后的抗拉强度平均达到249.8 MPa,抗拉强度较金属型增加了11.0%.

  5. Plastic Bronchitis.

    Science.gov (United States)

    Rubin, Bruce K

    2016-09-01

    Plastic bronchitis is an uncommon and probably underrecognized disorder, diagnosed by the expectoration or bronchoscopic removal of firm, cohesive, branching casts. It should not be confused with purulent mucous plugging of the airway as seen in patients with cystic fibrosis or bronchiectasis. Few medications have been shown to be effective and some are now recognized as potentially harmful. Current research directions in plastic bronchitis research include understanding the genetics of lymphatic development and maldevelopment, determining how abnormal lymphatic malformations contribute to cast formation, and developing new treatments. Copyright © 2016 Elsevier Inc. All rights reserved.

  6. The degradation potential of PET bottles in the marine environment: An ATR-FTIR based approach.

    Science.gov (United States)

    Ioakeimidis, C; Fotopoulou, K N; Karapanagioti, H K; Geraga, M; Zeri, C; Papathanassiou, E; Galgani, F; Papatheodorou, G

    2016-03-22

    The dominance and persistence of plastic debris in the marine environment are well documented. No information exists in respect to their lifespan in the marine environment. Nevertheless, the degradation potential of plastic litter items remains a critical issue for marine litter research. In the present study, polyethylene terephthalate bottles (PETs) collected from the submarine environment were characterized using ATR-FTIR in respect to their degradation potential attributed to environmental conditions. A temporal indication was used as indicative to the years of presence of the PETs in the environment as debris. PETs seem to remain robust for approximately fifteen years. Afterwards, a significant decrease of the native functional groups was recorded; some even disappear; or new-not typical for PETs-are created. At a later stage, using the PET time series collected from the Saronikos Gulf (Aegean Sea-E. Mediterranean), it was possible to date bottles that were collected from the bottom of the Ionian Sea (W. Greece). It is the first time that such a study has been conducted with samples that were actually degraded in the marine environment.

  7. The degradation potential of PET bottles in the marine environment: An ATR-FTIR based approach

    Science.gov (United States)

    Ioakeimidis, C.; Fotopoulou, K. N.; Karapanagioti, H. K.; Geraga, M.; Zeri, C.; Papathanassiou, E.; Galgani, F.; Papatheodorou, G.

    2016-03-01

    The dominance and persistence of plastic debris in the marine environment are well documented. No information exists in respect to their lifespan in the marine environment. Nevertheless, the degradation potential of plastic litter items remains a critical issue for marine litter research. In the present study, polyethylene terephthalate bottles (PETs) collected from the submarine environment were characterized using ATR-FTIR in respect to their degradation potential attributed to environmental conditions. A temporal indication was used as indicative to the years of presence of the PETs in the environment as debris. PETs seem to remain robust for approximately fifteen years. Afterwards, a significant decrease of the native functional groups was recorded; some even disappear; or new-not typical for PETs-are created. At a later stage, using the PET time series collected from the Saronikos Gulf (Aegean Sea–E. Mediterranean), it was possible to date bottles that were collected from the bottom of the Ionian Sea (W. Greece). It is the first time that such a study has been conducted with samples that were actually degraded in the marine environment.

  8. 21 CFR 880.6085 - Hot/cold water bottle.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Hot/cold water bottle. 880.6085 Section 880.6085... Devices § 880.6085 Hot/cold water bottle. (a) Identification. A hot/cold water bottle is a device intended for medical purposes that is in the form of a container intended to be filled with hot or cold...

  9. Tiny Gems of Chinese Handicraft:Snuff Bottles

    Institute of Scientific and Technical Information of China (English)

    JENNIFER; LIM

    1998-01-01

    THE snuff bottle, a kind of handicraft introduced to China from abroad along with the habit of sniffing powdered tobacco, has a history of more than 200 years. Despite the fact that the practice of taking snuff has long since disappeared, Chinese snuff bottles have become precious collector’s items because of their exquisite artistry. The snuff bottle was especially popular in the reign of Emperor Yongzheng (1723-1735) during the Qing

  10. Mixed plastics recycling technology

    CERN Document Server

    Hegberg, Bruce

    1995-01-01

    Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.

  11. Microstructural Evolution in Cold-Rolled Squeeze-Cast SiCw/Al Composites during Annealing

    Institute of Scientific and Technical Information of China (English)

    Wenlong ZHANG; Dezun WANG; Zhongkai YAO; Mingyuan GU

    2004-01-01

    A 15 vol. Pct SiCw/Al composite was fabricated by a squeeze cast route followed by hot extrusion in the extrusion ratio of 18:1 and cold rolling to 50%. Microstructural evolution in the cold rolled composite during annealing was studied using macrohardness measurement and transmission electron microscopy (TEM). It was found that, during cold rolling the plastic flow of the matrix was restricted by the whiskers around them along the rolling direction, which resulted in different microstructure from near whiskers to far away. The cold rolled composite exhibited different microstructural development on 1 h annealing at different temperatures. Under annealing at about 100℃, recovery reaction occurred obviously and the introduction of SiC whiskers resulted in enhanced recovery reaction. Under annealing above about 200℃, recrystallization (growth of nuclei by high-angle grain boundary migration) and extended recovery took place simultaneously. When annealing temperature was increased up to 500℃, recrystallization fully took place in the cold rolled microstructure. The starting temperature of recrystallization was about 200℃. Whiskers played a role in stimulating the nucleation of recrystallization.

  12. MAT 300  Assignment 1: Bottling Company Case Study

    OpenAIRE

    Laynebaril

    2017-01-01

     MAT 300  Assignment 1: Bottling Company Case Study Click Link Below To Buy: http://hwcampus.com/shop/mat-300-assignment-1-bottling-company-case-study/   Due Week 10 and worth 140 points Imagine you are a manager at a major bottling company. Customers have begun to complain that the bottles of the brand of soda produced in your company contain less than the advertised sixteen (16) ounces of product. Your boss wants to solve the problem at hand and has asked you to investig...

  13. Plastic zonnecellen

    NARCIS (Netherlands)

    Roggen, Marjolein

    1998-01-01

    De zonnecel van de toekomst is in de maak. Onderzoekers van uiteenlopend pluimage werken eendrachtig aan een plastic zonnecel. De basis is technisch gelegd met een optimale, door invallend licht veroorzaakte, vorming van ladingdragers binnen een composiet van polymeren en buckyballs. Nu is het zaak

  14. Chronic alcohol alters rewarded behaviors and striatal plasticity

    OpenAIRE

    DePoy, Lauren; Daut, Rachel; Wright, Tara; Camp, Marguerite; Crowley, Nicole; Noronha, Bianca; Lovinger, David; Holmes, Andrew

    2014-01-01

    Chronic intermittent ethanol (CIE) alters neural functions and behaviors mediated by the dorsolateral striatum (DLS) and prefrontal cortex. Here, we examined the effects of prolonged (16-bout) CIE on DLS plasticity and DLS-mediated behaviors. Ex vivo electrophysiological recordings revealed loss in efficacy of DLS synaptically induced activation and absent long-term depression after CIE. CIE increased two-bottle choice drinking and impaired Pavlovian-to-instrumental transfer but not discrimin...

  15. 77 FR 25721 - Small Entity Compliance Guide: Bottled Water: Quality Standard: Establishing an Allowable Level...

    Science.gov (United States)

    2012-05-01

    ... HUMAN SERVICES Food and Drug Administration Small Entity Compliance Guide: Bottled Water: Quality... availability of a guidance for industry entitled ``Bottled Water: Quality Standard: Establishing an Allowable... its bottled water standard of quality regulations by establishing an allowable level for...

  16. Bottled water: United States consumers and their perceptions of water quality

    National Research Council Canada - National Science Library

    Hu, Zhihua; Morton, Lois Wright; Mahler, Robert L

    2011-01-01

    Consumption of bottled water is increasing worldwide. Prior research shows many consumers believe bottled water is convenient and has better taste than tap water, despite reports of a number of water quality incidents with bottled water...

  17. Quantitative Analysis of Bisphenol A Leached from Household Plastics by Solid-Phase Microextraction and Gas Chromatography-Mass Spectrometry (SPME-GC-MS)

    Science.gov (United States)

    Johnson, Bettie Obi; Burke, Fernanda M.; Harrison, Rebecca; Burdette, Samantha

    2012-01-01

    The measurement of trace levels of bisphenol A (BPA) leached out of household plastics using solid-phase microextraction (SPME) with gas chromatography-mass spectrometry (GC-MS) is reported here. BPA is an endocrine-disrupting compound used in the industrial manufacture of polycarbonate plastic bottles and epoxy resin can liners. This experiment…

  18. Quantitative Analysis of Bisphenol A Leached from Household Plastics by Solid-Phase Microextraction and Gas Chromatography-Mass Spectrometry (SPME-GC-MS)

    Science.gov (United States)

    Johnson, Bettie Obi; Burke, Fernanda M.; Harrison, Rebecca; Burdette, Samantha

    2012-01-01

    The measurement of trace levels of bisphenol A (BPA) leached out of household plastics using solid-phase microextraction (SPME) with gas chromatography-mass spectrometry (GC-MS) is reported here. BPA is an endocrine-disrupting compound used in the industrial manufacture of polycarbonate plastic bottles and epoxy resin can liners. This experiment…

  19. Plastic Surgery Statistics

    Science.gov (United States)

    ... PSN PSEN GRAFT Contact Us News Plastic Surgery Statistics Plastic surgery procedural statistics from the American Society of Plastic Surgeons. Statistics by Year Print 2016 Plastic Surgery Statistics 2015 ...

  20. Bottle filling machine bottle holder stainless steel prop Process Analysis%灌瓶机不锈钢托瓶支架加工工艺分析

    Institute of Scientific and Technical Information of China (English)

    易忠奇; 陈平华

    2013-01-01

    针对ASY1/20塑料安瓿制瓶、灌装、封口一体机不锈钢托瓶支架零件机械加工工艺方案的确定方法、理论依据及对各加工工序所需的工装夹具设计进行了详细的阐述。同时,在机械加工中不锈钢材质零件属难加工材料,就如何确保零件的加工质量和提高加工效率,对切削用的刀具材料、参数选择及加工工艺进行探讨,并在实际生产中得到了应用,有效的提高产品质量和经济效益。%For ASY1/20 plastic ampoule bottle, filling and sealing machine stainless steel prop bottle holder parts ma-chining process plan determination methods, theoretical basis and the various processing steps required for fixture design was elaborated. Meanwhile, in machining stainless steel parts are difficult to machine materials, on how to ensure part quality and improve processing efficiency, cutting tool material selection and processing parameters are discussed, and in the actual production has been applied, effectively improve the product quality and economic efficiency.

  1. Towards a sensory congruent beer bottle: Consumer associations between beer brands, flavours, and bottle designs

    NARCIS (Netherlands)

    Fenko, Anna; Heiltjes, Sanne; van den Berg-Weitzel, Lianne; Lloyd, Peter; Bohemia, Erik

    2016-01-01

    Sensory packaging design congruent with product and brand characteristics may be used as an innovative tool to communicate product and brand values to consumers and to enhance taste experience. This study investigated whether consumers associate sensory properties of beer bottles with certain brand

  2. Effects of Number and Location of Bins on Plastic Recycling at a University

    Science.gov (United States)

    O'Connor, Ryan T.; Lerman, Dorothea C.; Fritz, Jennifer N.; Hodde, Henry B.

    2010-01-01

    The proportion of plastic bottles that consumers placed in appropriate recycling receptacles rather than trash bins was examined across 3 buildings on a university campus. We extended previous research on interventions to increase recycling by controlling the number of recycling receptacles across conditions and by examining receptacle location…

  3. Variance squeezing and entanglement of the XX central spin model

    Energy Technology Data Exchange (ETDEWEB)

    El-Orany, Faisal A A [Department of Mathematics and Computer Science, Faculty of Science, Suez Canal University, Ismailia (Egypt); Abdalla, M Sebawe, E-mail: m.sebaweh@physics.org [Mathematics Department, College of Science, King Saud University PO Box 2455, Riyadh 11451 (Saudi Arabia)

    2011-01-21

    In this paper, we study the quantum properties for a system that consists of a central atom interacting with surrounding spins through the Heisenberg XX couplings of equal strength. Employing the Heisenberg equations of motion we manage to derive an exact solution for the dynamical operators. We consider that the central atom and its surroundings are initially prepared in the excited state and in the coherent spin state, respectively. For this system, we investigate the evolution of variance squeezing and entanglement. The nonclassical effects have been remarked in the behavior of all components of the system. The atomic variance can exhibit revival-collapse phenomenon based on the value of the detuning parameter.

  4. Deterministic Quantum Key Distribution Using Gaussian-Modulated Squeezed States

    Institute of Scientific and Technical Information of China (English)

    何广强; 朱俊; 曾贵华

    2011-01-01

    A continuous variable ping-pong scheme, which is utilized to generate deterministic private key, is proposed. The proposed scheme is implemented physically by using Ganssian-modulated squeezed states. The deterministic char- acteristic, i.e., no basis reconciliation between two parties, leads a nearly two-time efficiency comparing to the standard quantum key distribution schemes. Especially, the separate control mode does not need in the proposed scheme so that it is simpler and more available than previous ping-pong schemes. The attacker may be detected easily through the fidelity of the transmitted signal, and may not be successful in the beam splitter attack strategy.

  5. Squeezing molecularly thin alkane lubrication films: Layering transistions and wear

    DEFF Research Database (Denmark)

    Sivebæk, Ion Marius; Samoilov, V. N.; Persson, B. N. J.

    2004-01-01

    The properties of alkane lubricants confined between two approaching solids are investigated by a model that accounts for the curvature and the elastic properties of the solid surfaces. We consider linear alkane molecules of different chain lengths, C(3)H(8); C(4)H(10); C(8)H(18); C(9)H(20); C(10)H......(22); C(12)H(26), and C(14)H(30) confined between smooth gold surfaces. We observe well-defined molecular layers develop in the lubricant film when the width of the film is of the order of a few atomic diameters. An external squeezing-pressure induces discontinuous changes in the number n of lubricant...

  6. Baryon Acoustic Peak and the Squeezed Limit Bispectrum

    CERN Document Server

    Mirbabayi, Mehrdad; Zaldarriaga, Matias

    2014-01-01

    In the non-relativistic regime, pertinent to the large scale structure of the Universe, the leading effect of a long-wavelength perturbation $\\delta(\\lambda_L)$ on short distance physics is a uniform acceleration $\\propto \\lambda_L \\delta(\\lambda_L)$. Typically, this has no effect on statistical averages at equal time since a uniform acceleration results in a uniform translation -- a reasoning that has been formalized as a "consistency condition" on the cosmological correlation functions. This naive expectation fails in the presence of the baryon acoustic feature provided $\\lambda_L < \\ell_{\\rm BAO}$. We derive the squeezed limit of correlation functions in this regime.

  7. Theoretical Analysis of Magnetorheological Damper Characteristics in Squeeze Mode

    Directory of Open Access Journals (Sweden)

    Sapiński Bogdan

    2015-06-01

    Full Text Available The paper summarises the theoretical study of a magnetorheological (MR damper operated in squeeze mode, intended to be used as an actuator in a semi-active mount system in a car motor. The structural design and operating principle of the damper are described and a simplified model of the MR fluid flow in the gap is presented. The plots of the damper force generated by the MR damper are obtained for monoharmonic piston motion with respect to the centre point of the gap height and in the conditions of the control coil being supplied with direct current.

  8. Squeezing of higher order Hermite-Gauss modes

    DEFF Research Database (Denmark)

    Lassen, Mikael Østergaard

    2008-01-01

    The present paper gives an overview of the experimental generation of squeezing in higher order Hermite-Gaussian modes with an optical parametric ampli¯er (OPA). This work was awarded with The European Optical Society (EOS) price 2007. The purpose of the prize is to encourage a European dimension...... in research in pure and applied optics. The EOS prize is awarded based on the selection criteria of high professionalism, academic and technical quality. Following the EOS Prize rules, the conditions for eligibility are that the work was performed in Europe and that it is published under the auspices...

  9. Euro Area——Fiscal Squeeze,Export Boost

    Institute of Scientific and Technical Information of China (English)

    Samra Al Harthy; Sarah Hewin

    2010-01-01

    @@ Europe's fiscat squeeze: how damaging? Tight fiscal versus loose monetary conditions The euro-area economy faces countervailing forces,and growth over the next two years is likely to be characterised by diverging trends among its member states.This divergence has been evident in the staggered return to growth within the region,with Germany and France back in positive territory by Q2-2009,while Spain pulled out of recession in Q1-2010.Business confidence surveys and purchasing managers indices point to buoyant growth for the region in Q2-2010,and strong orders should sustain the momentum in Q3.

  10. Lipid corralling and poloxamer squeeze-out in membranes

    DEFF Research Database (Denmark)

    Wu, G.H.; Majewski, J.; Ege, C.;

    2004-01-01

    Using x-ray scattering measurements we have quantitatively determined the effect of poloxamer 188 (P188), a polymer known to seal damaged membranes, on the structure of lipid monolayers. P188 selectively inserts into low lipid-density regions of the membrane and "corrals" lipid molecules to pack...... tightly, leading to unexpected Bragg peaks at low nominal lipid density and inducing lipid/poloxamer phase separation. At tighter lipid packing, the once inserted P188 is squeezed out, allowing the poloxamer to gracefully exit when the membrane integrity is restored....

  11. Entropy production and thermodynamic power of the squeezed thermal reservoir

    Science.gov (United States)

    Manzano, Gonzalo; Galve, Fernando; Zambrini, Roberta; Parrondo, Juan M. R.

    2016-05-01

    We analyze the entropy production and the maximal extractable work from a squeezed thermal reservoir. The nonequilibrium quantum nature of the reservoir induces an entropy transfer with a coherent contribution while modifying its thermal part, allowing work extraction from a single reservoir, as well as great improvements in power and efficiency for quantum heat engines. Introducing a modified quantum Otto cycle, our approach fully characterizes operational regimes forbidden in the standard case, such as refrigeration and work extraction at the same time, accompanied by efficiencies equal to unity.

  12. From fractional Fourier transformation to quantum mechanical fractional squeezing transformation

    Institute of Scientific and Technical Information of China (English)

    吕翠红; 范洪义; 李东韡

    2015-01-01

    By converting the triangular functions in the integration kernel of the fractional Fourier transformation to the hy-perbolic function, i.e., tanα→tanhα, sinα→sinhα, we find quantum mechanical fractional squeezing transformation (FrST) which satisfies additivity. By virtue of the integration technique within ordered product of operators (IWOP) wederive the unitary operator responsible for the FrST, which is composite and is made of eiπa†a/2 and exp[ iα2 (a2+a†2)]. The FrST may be implemented in combinations of quadratic nonlinear crystals with different phase mismatches.

  13. Multiscale Modeling of Red Blood Cells Squeezing through Submicron Slits

    Science.gov (United States)

    Peng, Zhangli; Lu, Huijie

    2016-11-01

    A multiscale model is applied to study the dynamics of healthy red blood cells (RBCs), RBCs in hereditary spherocytosis, and sickle cell disease squeezing through submicron slits. This study is motivated by the mechanical filtration of RBCs by inter-endothelial slits in the spleen. First, the model is validated by comparing the simulation results with experiments. Secondly, the deformation of the cytoskeleton in healthy RBCs is investigated. Thirdly, the mechanisms of damage in hereditary spherocytosis are investigated. Finally, the effects of cytoplasm and membrane viscosities, especially in sickle cell disease, are examined. The simulations results provided guidance for future experiments to explore the dynamics of RBCs under extreme deformation.

  14. Effective thermodynamics of isolated entangled squeezed and coherent states

    CERN Document Server

    Seroje, King Karl R; Paraan, Francis N C

    2015-01-01

    The R\\'enyi entanglement entropy is calculated exactly for mode-partitioned isolated systems such as the two-mode squeezed state and the multi-mode Silbey-Harris polaron ansatz state. Effective thermodynamic descriptions of the correlated partitions are constructed to present quantum information theory concepts in the language of thermodynamics. Boltzmann weights are obtained from the entanglement spectrum by deriving the exact relationship between an effective temperature and the physical entanglement parameters. The partition function of the resulting effective thermal theory can be obtained directly from the single-copy entanglement.

  15. Experimental evidence for Raman-induced limits to efficient squeezing in optical fibers

    DEFF Research Database (Denmark)

    Dong, R.; Heersink, J.; Corney, J.

    2008-01-01

    We report new experiments on polarization squeezing using ultrashort photonic pulses in a single pass of a birefringent fiber. We measure what is to our knowledge a record squeezing of -6.8 +/- 0.3 dB in optical fibers which when corrected for linear losses is -10.4 +/- 0.8 dB. The measured...

  16. Enhancement of Squeezing in Two-Photon Jaynes-Cummings Model with Atomic Measurement

    Institute of Scientific and Technical Information of China (English)

    YE Sai-Yun

    2006-01-01

    We investigate the squeezing properties of the cavity field in the degenerate two-photon Jaynes-Cummings model. Compared with the one-photon Jaynes-Cummings model, the squeezing is more pronounced in the case of two-photon Jaynes-Cummings model under certain conditions.

  17. Teleportation of a two-particle four-component squeezed vacuum state by linear optical elements

    Institute of Scientific and Technical Information of China (English)

    Huina Chen; Jinming Liu

    2009-01-01

    We present a linear optical scheme for achieving a unity fidelity teleportation of a two-particle four component squeezed vacuum state using two entangled squeezed vacuum states as quantum channel.The devices used are beam splitters and ideal photon detectors capable of distinguishing between odd and even photon numbers.Moreover,we also obtain the success probability of the teleportation scheme.

  18. Transforming squeezed light into large-amplitude coherent-state superposition

    DEFF Research Database (Denmark)

    Nielsen, Anne Ersbak Bang; Mølmer, Klaus

    2007-01-01

    A quantum superposition of two coherent states of light with small amplitude can be obtained by subtracting a photon from a squeezed vacuum state. In experiments this preparation can be made conditioned on the detection of a photon in the field from a squeezed light source. We propose and analyze...

  19. Measurement Induced Enhancement of Squeezing in Nondegenerate Two-Photon Jaynes-Cummings Model

    Institute of Scientific and Technical Information of China (English)

    YE Sai-Yun

    2006-01-01

    Squeezing properties in the nondegenerate two-photon Jaynes-Cummings model are investigated. The effects of direct selective atomic measurement and the application of the classical field followed by atomic measurement are analyzed. Different values of the parameters of the classical field are taken into account. It is found that the field squeezing can be enhanced by measurement.

  20. Analytical Study of Two-Mode Thermal Squeezed States and Black Holes

    Science.gov (United States)

    Venkataratnam, K. K.

    2017-02-01

    We study the two-mode thermal squeezed states formalism to examine the particle creation by black holes.We also study the entropy generation and derive an equation for Hawking temperature in terms of squeezed parameter and an associated temperature dependent parameters.

  1. Maximal entanglement of squeezed vacuum states via swapping with number-phase measurement

    CERN Document Server

    Kitagawa, A; Kitagawa, Akira; Yamamoto, Katsuji

    2002-01-01

    We propose a method to realize entanglement via swapping from a pair of squeezed vacuum states by performing number sum and phase difference measurements. The resultant states are maximally entangled by adjusting the two squeezing parameters to the same value. We then describe a teleportation protocol by using the entangled states prepared in this way.

  2. Bounds for entanglement of formation of two mode squeezed thermal states

    CERN Document Server

    Chen, X Y; Chen, Xiao-Yu; Qiu, Pei-liang

    2003-01-01

    The upper and lower bounds of entanglement of formation are given for two mode squeezed thermal state. The bounds are compared with other entanglement measure or bounds. The entanglement distillation and the relative entropy of entanglement of infinitive squeezed state are obtained at the postulation of hashing inequality.

  3. SQUEEZING PROPERTIES OF A TRAPPED ION IN THE STANDING-WAVE LASER

    Institute of Scientific and Technical Information of China (English)

    FANG MAO-FA; LIU XIANG

    2001-01-01

    We investigate the squeezing properties of a trapped ion in a standing-wave laser. Our results show that the squeezing of a trapped ion in the standing-wave laser is dependent on its position in the latter, the detuning parameter and the initial average phonon number.

  4. Comparison of acetate tape impression with squeezing versus skin scraping for the diagnosis of canine demodicosis.

    Science.gov (United States)

    Pereira, A V; Pereira, S A; Gremião, I D F; Campos, M P; Ferreira, A M R

    2012-11-01

    This study compared the sensitivity of acetate tape impression and skin squeezing with that of deep skin scraping for the diagnosis of demodicosis in dogs. Demodex canis was detected in 100% of acetate tape impressions obtained after skin squeezing and in 90% of deep skin scrapings. There was a significant difference (P scraping and is an alternative diagnostic method for canine demodicosis.

  5. First long-term application of squeezed states of light in a gravitational-wave observatory.

    Science.gov (United States)

    Grote, H; Danzmann, K; Dooley, K L; Schnabel, R; Slutsky, J; Vahlbruch, H

    2013-05-03

    We report on the first long-term application of squeezed vacuum states of light to improve the shot-noise-limited sensitivity of a gravitational-wave observatory. In particular, squeezed vacuum was applied to the German-British detector GEO 600 during a period of three months from June to August 2011, when GEO 600 was performing an observational run together with the French-Italian Virgo detector. In a second period, the squeezing application continued for about 11 months from November 2011 to October 2012. During this time, squeezed vacuum was applied for 90.2% (205.2 days total) of the time that science-quality data were acquired with GEO 600. A sensitivity increase from squeezed vacuum application was observed broadband above 400 Hz. The time average of gain in sensitivity was 26% (2.0 dB), determined in the frequency band from 3.7 to 4.0 kHz. This corresponds to a factor of 2 increase in the observed volume of the Universe for sources in the kHz region (e.g., supernovae, magnetars). We introduce three new techniques to enable the long-term application of squeezed light, and show that the glitch rate of the detector did not increase from squeezing application. Squeezed vacuum states of light have arrived as a permanent application, capable of increasing the astrophysical reach of gravitational-wave detectors.

  6. THE HISTORY OF BORSEC MINERAL WATER BOTTLING

    Directory of Open Access Journals (Sweden)

    G. B. TOFAN

    2014-06-01

    Full Text Available The History of Borsec Mineral Water Bottling. The mineral water springs of Borsec have been known to exist since ancient times. It started as a legend, presented by Orbán Balász, who mentions an author named Salzer. In his „Voyage Diaries in Transylvania”, Salzer recounts the discovery of healing springs in the area, and attributes it, like many other authors, to a Romanian shepherd called Gheorghe, who, suffering from ulcer, returning home one day, drank from one of the Borsec springs. Drinking the sour water, he felt better. Consequently, he remained there for a couple of days, drinking water from the same spot and curing his ailment. Written documents date back from the 16th century, when Bethlen Farkas, in the historical novel „Historia”, recounts that, in 1594, Sigismund Bathory, who resided in Alba Iulia, suffered from nervous exhaustion. His Italian doctor, Bucello, who knew about the curing effects of the Borsec mineral waters, prescribed a treatment using the water from the „Lobogó” spring. The water, transported to the princely estate in large covered barrels, eventually healed Sigismund Bathory. It is easy to see why, at the end of the 16th century, the mineral water of Borsec, with its miracle properties, was well known in Transylvania and at the imperial court of Vienna. The above mentioned spring, used from the 19th century onwards, for spas and for bottling, earned great renown, especially due to the high concentration of CO2 (over 2.5 g/l. The bottled sparkling water, due to its pleasant taste and its chemical stability, is the most sought after table water. This explains why, in most cases, the notion of mineral water is associated with „Borsec”.

  7. Little bottles and the promise of probiotics.

    Science.gov (United States)

    Burges Watson, Duika; Moreira, Tiago; Murtagh, Madeleine

    2009-03-01

    In this article we explore; regimes of hope' in contemporary bioscience as articulated in spaces of health consumption. We use the case study of probiotic little bottles, highlighting their promissory branding as consumer products, to consider how hope and truth play out across different spaces of health care - the supermarket, media and laboratory. Drawing on work within both sociological and geographic literatures to think about hope, truth and probiotics, this article explores their ambiguous promise through an analysis of their biomedical and popular representation. The seemingly incommensurate promise of probiotics between popular and medical spheres provides the point of departure for an examination of the geographies of hope, truth and selfhood.

  8. Nonzero Temperature Squeezing of the Time-Dependent Harmonic Oscillator and the Applications to the Capacitive Coupled Electric Circuit

    Institute of Scientific and Technical Information of China (English)

    LIANG Mai-Lin; YUAN Bing

    2002-01-01

    A new way to calculate the nonzero temperature quantum fluctuations of the time-dependent harmonicoscillator is proposed and the properties of squeezing are exactly given. The method is applied to the capacitive coupledelectric circuit. It is explicitly shown that squeezing can appear and the squeezing parameters are related to the physicalquantities of the coupled circuit.

  9. Plastic bronchitis

    Directory of Open Access Journals (Sweden)

    Anil Kumar Singhi

    2015-01-01

    Full Text Available Plastic bronchitis, a rare but serious clinical condition, commonly seen after Fontan surgeries in children, may be a manifestation of suboptimal adaptation to the cavopulmonary circulation with unfavorable hemodynamics. They are ominous with poor prognosis. Sometimes, infection or airway reactivity may provoke cast bronchitis as a two-step insult on a vulnerable vascular bed. In such instances, aggressive management leads to longer survival. This report of cast bronchitis discusses its current understanding.

  10. Influence of Section Thickness on Microstructure and Mechanical Properties of Squeeze Cast Magnesium Alloy AM60

    Science.gov (United States)

    Zhang, Xuezhi; Wang, Meng; Sun, Zhizhong; Hu, Henry

    Squeeze cast light alloys has been approved for advanced engineering design of light integrity automotive applications. An understanding of the effect of section thicknesses on mechanical properties of squeeze cast magnesium alloys is essential for proper design of different applications. The present work studied the microstructure and tensile properties of magnesium alloy AM60 with different section thickness of 6, 10 and 20mm squeeze cast under an applied pressure of 30MPa. The results of tensile testing indicate that the yield strength (YS), ultimate tensile strength (UTS) and elongation (Ef) increase with a decreasing in section thicknesses of squeeze cast AM60. The microstructure analysis shows that the improvement in the tensile properties of squeeze cast AM60 is mainly attributed to the low level of gas porosity and the high content of eutectic phases and fine grain structure which resulted from high solidification rates taking place in the thin section.

  11. The Effect of Incoherent Population Pumping on Squeezing in Resonance Fluorescence

    Institute of Scientific and Technical Information of China (English)

    CHEN Zhaoyang; ZHANG Jingtao; XU Zhizhan

    2000-01-01

    The effect of incoherent population pumping on the steady-state population inversion and the quadrature squeezing spectra produced in the resonance fluorescence of a two-level atom is investigated. In the presence of incoherent population pumping, the steady-state population inversion is increased for small frequency detuning but is not changed for large frequency detuning. For resonant excitation at low intensities, the weak incoherent pumping degrades the degree of the squeezing and shifts the position of the maximum squeezing; for off-resonant excitation at strong intensities, the weak incoherent pumping hardly changes the squeezing spectra. But when the incoherent pumping is strong the squeezing may be completely destroyed for both cases.

  12. First beam test of a combined ramp and squeeze at LHC

    CERN Document Server

    Wenninger, Jorg; Coello De Portugal - Martinez Vazquez, Jaime Maria; Gorzawski, Arkadiusz; Redaelli, Stefano; Schaumann, Michaela; Solfaroli Camillocci, Matteo; CERN. Geneva. ATS Department

    2015-01-01

    With increasing maturity of LHC operation it is possible to envisage more complex beam manipulations. At the same time operational efficiency receives increasing attention. So far ramping the beams to their target energy and squeezing the beams to smaller or higher beta are decoupled at the LHC. (De-)squeezing is always performed at the target energy, currently 6.5 TeV. Studies to combine the ramp and squeeze processes have been made for the LHC since 2011, but so far no experimental test with beam had ever performed. This note describes the first machine experiment with beam aiming at validating the combination of ramp and squeeze, the so-called combined ramp and squeeze (CRS).

  13. Couple Stress Squeeze Films with VPD in a Curved Circular Geometry

    Directory of Open Access Journals (Sweden)

    Vimala Ponnuswamy

    2015-01-01

    Full Text Available The problem of couple stress squeeze films considering viscosity pressure dependence (VPD has been analysed in a curved circular geometry. Using Stokes microcontinuum theory and the Barus formula, the Reynolds type equation has been derived. The approximate analytical expressions for the squeeze film pressure and load carrying capacity are obtained using a perturbation technique. The numerical solutions for the squeeze film pressure and load carrying capacity are presented for the sinusoidal motion of the upper curved disk, assuming an exponential form for the curvature. The effects of curvature, the non-Newtonian couple stresses, and VPD and their combined effects are investigated through the squeeze film pressure and the load carrying capacity of the squeeze film.

  14. Dynamical Relation between Quantum Squeezing and Entanglement in Coupled Harmonic Oscillator System

    Directory of Open Access Journals (Sweden)

    Lock Yue Chew

    2014-04-01

    Full Text Available In this paper, we investigate into the numerical and analytical relationship between the dynamically generated quadrature squeezing and entanglement within a coupled harmonic oscillator system. The dynamical relation between these two quantum features is observed to vary monotically, such that an enhancement in entanglement is attained at a fixed squeezing for a larger coupling constant. Surprisingly, the maximum attainable values of these two quantum entities are found to consistently equal to the squeezing and entanglement of the system ground state. In addition, we demonstrate that the inclusion of a small anharmonic perturbation has the effect of modifying the squeezing versus entanglement relation into a nonunique form and also extending the maximum squeezing to a value beyond the system ground state.

  15. Influence of the virtual photon field on the squeezing properties of an atom laser

    Institute of Scientific and Technical Information of China (English)

    Zhao Jian-Gang; Sun Chang-Yong; Wen Ling-Hua; Liang Bao-Long

    2009-01-01

    This paper investigates the squeezing properties of an atom laser without rotating-wave approximation in the system of a binomial states field interacting with a two-level atomic Bose-Einstein condensate. It discusses the influences of atomic eigenfrequency, the interaction intensity between the optical field and atoms, parameter of the binomial states field and virtual photon field on the squeezing properties. The results show that two quadrature components of an atom laser can be squeezed periodically. The duration and the degree of squeezing an atom laser have something to do with the atomic eigenfrequency and the parameter of the binomial states field, respectively. The collapse and revival frequency of atom laser fluctuation depends on the interaction intensity between the optical field and atoms. The effect of the virtual photon field deepens the depth of squeezing an atom laser.

  16. Squeezing red blood cells on an optical waveguide to monitor cell deformability during blood storage.

    Science.gov (United States)

    Ahluwalia, Balpreet Singh; McCourt, Peter; Oteiza, Ana; Wilkinson, James S; Huser, Thomas R; Hellesø, Olav Gaute

    2015-01-07

    Red blood cells squeeze through micro-capillaries as part of blood circulation in the body. The deformability of red blood cells is thus critical for blood circulation. In this work, we report a method to optically squeeze red blood cells using the evanescent field present on top of a planar waveguide chip. The optical forces from a narrow waveguide are used to squeeze red blood cells to a size comparable to the waveguide width. Optical forces and pressure distributions on the cells are numerically computed to explain the squeezing process. The proposed technique is used to quantify the loss of blood deformability that occurs during blood storage lesion. Squeezing red blood cells using waveguides is a sensitive technique and works simultaneously on several cells, making the method suitable for monitoring stored blood.

  17. 27 CFR 19.394 - Bottled-in-bond spirits.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottled-in-bond spirits. 19.394 Section 19.394 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU... which are labeled as bottled-in-bond for domestic consumption shall meet the requirements in 27 CFR...

  18. 27 CFR 27.206 - Bottles not constituting approved containers.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Bottles not constituting approved containers. 27.206 Section 27.206 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX... officer that such bottle is not an approved container for distilled spirits for consumption in the...

  19. Filling or draining a water bottle with two holes

    Science.gov (United States)

    Cross, Rod

    2016-07-01

    Three simple experiments are described using a small water bottle with two holes in the side of the bottle. The main challenge is to predict and then explain the observations, but the arrangements can also be used for quantitative measurements concerning hydrostatic pressure, Bernoulli’s equation, surface tension and bubble formation.

  20. Rework and postponement: a comparison of bottling strategies

    NARCIS (Netherlands)

    R.H. Teunter (Ruud); S.D.P. Flapper

    2003-01-01

    textabstractThis paper presents the results of a case study in a batch production facility for biological vaccines. The problem considered is that of finding the best bottling strategy for produced batches. A batch can be bottled directly after production, after positive intermediate test results, o

  1. Engineering Study of 500 ML Sample Bottle Transportation Methods

    Energy Technology Data Exchange (ETDEWEB)

    BOGER, R.M.

    1999-08-25

    This engineering study reviews and evaluates all available methods for transportation of 500-mL grab sample bottles, reviews and evaluates transportation requirements and schedules and analyzes and recommends the most cost-effective method for transporting 500-mL grab sample bottles.

  2. 27 CFR 25.158 - Tax computation for bottled beer.

    Science.gov (United States)

    2010-04-01

    ... bottled beer. 25.158 Section 25.158 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Determination of Tax § 25.158 Tax computation for bottled beer. Barrel equivalents for various case sizes are as follows: (a) For U.S....

  3. What about the Bottle? Answers to Common Questions.

    Science.gov (United States)

    Laird, Valerie

    2001-01-01

    Acknowledges the large amount of confusing information about bottle feeding in areas including nutrition, sanitation, dental health, psychology, and child development. Answers specific questions pertaining to choice of formula and formula preparation, supporting breastfeeding, bottle choice, solid food introduction, feeding position, spitting up,…

  4. Stress-strain response of plastic waste mixed soil.

    Science.gov (United States)

    Babu, G L Sivakumar; Chouksey, Sandeep Kumar

    2011-03-01

    Recycling plastic waste from water bottles has become one of the major challenges worldwide. The present study provides an approach for the use plastic waste as reinforcement material in soil. The experimental results in the form of stress-strain-pore water pressure response are presented. Based on experimental test results, it is observed that the strength of soil is improved and compressibility reduced significantly with addition of a small percentage of plastic waste to the soil. The use of the improvement in strength and compressibility response due to inclusion of plastic waste can be advantageously used in bearing capacity improvement and settlement reduction in the design of shallow foundations. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. A novel vision-based PET bottle recycling facility

    Science.gov (United States)

    He, Xiangyu; He, Zaixing; Zhang, Shuyou; Zhao, Xinyue

    2017-02-01

    Post-consumer PET bottle recycling is attracting increasing attention due to its value as an energy conservation and environmental protection measure. Sorting by color is a common method in bottle recycling; however, manual operations are unstable and time consuming. In this paper, we design a vision-based facility to perform high-speed bottle sorting. The proposed facility consists mainly of electric and mechanical hardware and image processing software. To solve the recognition problem of isolated and overlapped bottles, we propose a new shape descriptor and utilize the support vector data description classifier. We use color names to represent the colors in the real world in order to avoid problems introduced by colors that are similar. The facility is evaluated by the target error, outlier error and total error. The experimental results demonstrate that the facility we developed is capable of recycling various PET bottles.

  6. Sideband cooling beyond the quantum backaction limit with squeezed light

    Science.gov (United States)

    Clark, Jeremy B.; Lecocq, Florent; Simmonds, Raymond W.; Aumentado, José; Teufel, John D.

    2017-01-01

    Quantum fluctuations of the electromagnetic vacuum produce measurable physical effects such as Casimir forces and the Lamb shift. They also impose an observable limit—known as the quantum backaction limit—on the lowest temperatures that can be reached using conventional laser cooling techniques. As laser cooling experiments continue to bring massive mechanical systems to unprecedentedly low temperatures, this seemingly fundamental limit is increasingly important in the laboratory. Fortunately, vacuum fluctuations are not immutable and can be ‘squeezed’, reducing amplitude fluctuations at the expense of phase fluctuations. Here we propose and experimentally demonstrate that squeezed light can be used to cool the motion of a macroscopic mechanical object below the quantum backaction limit. We first cool a microwave cavity optomechanical system using a coherent state of light to within 15 per cent of this limit. We then cool the system to more than two decibels below the quantum backaction limit using a squeezed microwave field generated by a Josephson parametric amplifier. From heterodyne spectroscopy of the mechanical sidebands, we measure a minimum thermal occupancy of 0.19 ± 0.01 phonons. With our technique, even low-frequency mechanical oscillators can in principle be cooled arbitrarily close to the motional ground state, enabling the exploration of quantum physics in larger, more massive systems.

  7. Squeezed light from a diamond-turned monolithic cavity

    CERN Document Server

    Brieussel, A; Campbell, G; Guccione, G; Janousek, J; Hage, B; Buchler, B C; Treps, N; Fabre, C; Fang, F Z; Li, X Y; Symul, T; Lam, P K

    2016-01-01

    For some crystalline materials, a regime can be found where continuous ductile cutting is feasible. Using precision diamond turning, such materials can be cut into complex optical components with high surface quality and form accuracy. In this work we use diamond-turning to machine a monolithic, square-shaped, doubly-resonant $LiNbO_3$ cavity with two flat and two convex facets. When additional mild polishing is implemented, the Q-factor of the resonator is found to be limited only by the material absorption loss. We show how our monolithic square resonator may be operated as an optical parametric oscillator that is evanescently coupled to free-space beams via birefringent prisms. The prism arrangement allows for independent and large tuning of the fundamental and second harmonic coupling rates. We measure $2.6\\pm0.5$ dB of vacuum squeezing at 1064 nm using our system. Potential improvements to obtain higher degrees of squeezing are discussed.

  8. Coherent quantum squeezing due to the phase space noncommutativity

    Science.gov (United States)

    Bernardini, Alex E.; Mizrahi, Salomon S.

    2015-06-01

    The effects of general noncommutativity of operators on producing deformed coherent squeezed states is examined in phase space. A two-dimensional noncommutative (NC) quantum system supported by a deformed mathematical structure, similar to that of Hadamard billiard, is obtained and the components behaviour is monitored in time. It is assumed that the independent degrees of freedom are two free 1D harmonic oscillators (HOs), so the system Hamiltonian does not contain interaction terms. Through the NC deformation parameterized by a Seiberg-Witten transform on the original canonical variables, one gets the standard commutation relations for the new ones, such that the obtained, new, Hamiltonian represents two interacting 1D HOs. By admitting that one HO is inverted relatively to the other, we show that their effective interaction induces a squeezing dynamics for initial coherent states imaged in the phase space. A suitable pattern of logarithmic spirals is obtained and some relevant properties are discussed in terms of Wigner functions, which are essential to put in evidence the effects of the noncommutativity.

  9. Nonclassical properties and decoherence of fields in photon-added squeezing-enhanced thermal states

    Science.gov (United States)

    Wang, Zhen; Meng, Xiang-Guo; Li, Heng-Mei; Yuan, Hong-Chun

    2014-04-01

    We put forward the photon-added squeezing-enhanced thermal states (PASETS) theoretically by adding photon to the squeezed enhancing thermal states (SETS) repeatedly. Based on the normally ordered density operator of PASETS, we investigate the nonclassical behavior of the PASETS by evaluating, both analytically and numerically, Mandel's Q-parameter, photon-number distribution (PND), and Wigner function (WF). It is found that smaller squeezing parameter r and thermal photon number nc can lead to more chance of the appearance of sub-Poissonian statistics. And it is shown that the PND of PASETS exhibit more remarkable oscillations than that of SETS in stronger squeezing case. The WF exhibit partial negativity in phase space and the squeezing parameter r can result in both squeezing and rotating effect. By investigating the fidelity between PASETS and SETS shows that the fidelity tender to steady values in the high value of squeezing parameter or thermal photon number. In addition, the decoherence effect on the PASETS is examined by the time-evolution of the analytical WF in thermal channel. The results show that the PASETS shall lose nonclassicality and non-Gaussianity and reduce to classical states with Gaussian distribution after sufficient time interaction with the thermal noise. And larger photon-added number or thermal photon number shall render shorter decoherence time.

  10. Quantum control of spin-nematic squeezing in a dipolar spin-1 condensate

    Science.gov (United States)

    Huang, Yixiao; Xiong, Heng-Na; Yang, Yang; Hu, Zheng-Da; Xi, Zhengjun

    2017-01-01

    Versatile controllability of interactions and magnetic field in ultracold atomic gases ha now reached an era where spin mixing dynamics and spin-nematic squeezing can be studied. Recent experiments have realized spin-nematic squeezed vacuum and dynamic stabilization following a quench through a quantum phase transition. Here we propose a scheme for storage of maximal spin-nematic squeezing, with its squeezing angle maintained in a fixed direction, in a dipolar spin-1 condensate by applying a microwave pulse at a time that maximal squeezing occurs. The dynamic stabilization of the system is achieved by manipulating the external periodic microwave pulses. The stability diagram for the range of pulse periods and phase shifts that stabilize the dynamics is numerical simulated and agrees with a stability analysis. Moreover, the stability range coincides well with the spin-nematic vacuum squeezed region which indicates that the spin-nematic squeezed vacuum will never disappear as long as the spin dynamics are stabilized. PMID:28233786

  11. Atom-assisted quadrature squeezing of a mechanical oscillator inside a dispersive cavity

    Science.gov (United States)

    Biswas, Asoka; Chauhan, Anil Kumar

    2016-05-01

    Measurement of position of a mesoscopic harmonic oscillator below standard quantum limit in cavity optomechanics has seen a growing interest in recent times. If the oscillator is suspended inside the cavity (with both the mirrors fixed) at a position where the cavity frequency becomes extremum (a membrane-in-the-middle setup), large squeezing can be achieved by conditional measurement of thermal photons; however the cavity decay degrades such squeezing. Here we propose an atom-cavity-oscillator hybrid scheme, in which the effect of cavity decay is eliminated via dispersive coupling of the cavity mode. The atom in Λ configuration is considered to be trapped on either side of the membrane inside the cavity. We show that a considerable amount of squeezing (far beyond the 3 dB limit) can be achieved that is not affected by spontaneous emission of the atom. The squeezing depends upon the initial preparation of the atomic states. Further, the external classical fields, that drive the atomic transition and the cavity mode, control the degree of squeezing and can also lead to a strong effective atom-oscillator coupling. Effect of thermal phonon bath on squeezing is studied in terms of the squeezing spectrum. The results are supported by the detailed analytical calculations.

  12. An investigation of doubly-resonant optical parametric oscillators and nonlinear crystals for squeezing

    Energy Technology Data Exchange (ETDEWEB)

    Stefszky, Michael; Buchler, Ben C; Symul, Thomas; Lam, Ping Koy [Quantum Optics Group, Department of Quantum Science, The Australian National University, ACT 0200 (Australia); Mow-Lowry, Conor M; McKenzie, Kirk; Chua, Sheon; McClelland, David E, E-mail: michael.stefszky@anu.edu.au [Centre for Gravitational Physics, Department of Quantum Science, The Australian National University, ACT 0200 (Australia)

    2011-01-14

    A squeezed light source requires properties such as high squeezing amplitude, high bandwidth and stability over time, ideally using as few resources, such as laser power, as possible. We compare three nonlinear materials, two of which have not been well characterized for squeezed state production, and also investigate the viability of doubly-resonant optical parametric oscillator cavities in achieving these requirements. A model is produced that provides a new way of looking at the construction of an optical parametric oscillator/optical parametric amplifier setup where second harmonic power is treated as a limited resource. The well-characterized periodically poled potassium titanyl phosphate (PPKTP) is compared in an essentially identical setup to two relatively new materials, periodically poled stoichiometric lithium tantalate (PPSLT) and 1.7% magnesium oxide doped periodically poled stoichiometric lithium niobate (PPSLN). Although from the literature PPSLT and PPSLN present advantages such as a higher damage threshold and a higher nonlinearity, respectively, PPKTP was still found to have the most desirable properties. With PPKTP, 5.8 dB of squeezing below the shot noise limit was achieved. With PPSLT, 5.0 dB of squeezing was observed but the power required to see this squeezing was much higher than expected. A technical problem with the PPSLN limited the observed squeezing to around 1.0 dB. This problem is discussed.

  13. A new classification scheme of plastic wastes based upon recycling labels.

    Science.gov (United States)

    Özkan, Kemal; Ergin, Semih; Işık, Şahin; Işıklı, Idil

    2015-01-01

    Since recycling of materials is widely assumed to be environmentally and economically beneficial, reliable sorting and processing of waste packaging materials such as plastics is very important for recycling with high efficiency. An automated system that can quickly categorize these materials is certainly needed for obtaining maximum classification while maintaining high throughput. In this paper, first of all, the photographs of the plastic bottles have been taken and several preprocessing steps were carried out. The first preprocessing step is to extract the plastic area of a bottle from the background. Then, the morphological image operations are implemented. These operations are edge detection, noise removal, hole removing, image enhancement, and image segmentation. These morphological operations can be generally defined in terms of the combinations of erosion and dilation. The effect of bottle color as well as label are eliminated using these operations. Secondly, the pixel-wise intensity values of the plastic bottle images have been used together with the most popular subspace and statistical feature extraction methods to construct the feature vectors in this study. Only three types of plastics are considered due to higher existence ratio of them than the other plastic types in the world. The decision mechanism consists of five different feature extraction methods including as Principal Component Analysis (PCA), Kernel PCA (KPCA), Fisher's Linear Discriminant Analysis (FLDA), Singular Value Decomposition (SVD) and Laplacian Eigenmaps (LEMAP) and uses a simple experimental setup with a camera and homogenous backlighting. Due to the giving global solution for a classification problem, Support Vector Machine (SVM) is selected to achieve the classification task and majority voting technique is used as the decision mechanism. This technique equally weights each classification result and assigns the given plastic object to the class that the most classification

  14. Safety of Bottled Water Beverages Including Flavored Water and Nutrient-Added Water Beverages

    Science.gov (United States)

    ... Association, bottled water was the second most popular beverage in the U.S. in 2005, with Americans consuming more than 7.5 million gallons of bottled water - an average of 26 gallons per person. Today, only carbonated soft drinks out-sell bottled water. Defining "Bottled ...

  15. Indications and complications of tube thoracostomy with improvised underwater seal bottles

    Directory of Open Access Journals (Sweden)

    Sunday A Edaigbini

    2014-01-01

    Full Text Available Background: Tube thoracostomy is a lifesaving and frequently performed procedure in hospitals where the expertise and necessary tools are available. Where the ideal drainage receptacle is unavailable, the underwater seal device can be improvised with bottled water plastic can especially in emergency situations. Aims and Objectives: To determine the frequencies of the various indications and complications of tube thoracostomy with improvised underwater seal. Materials and Methods: A cross-sectional study with a structured proforma was used for assessment over a 3-year period (May 2010-April 2013. The proforma was filled at the time of the procedure by the performing surgeon and patients were followed up with serial chest X-rays until certified cured. A 1.5 L bottled water container was used as the underwater seal receptacle. The data was analysed with SPSS 15 software program. Results: A total of 167 patients were managed. There were 106 (63.5% males and 61 (36.5% females. The mean age was 34.85 ± 16.72 with a range of 1-80 years. The most frequent indication was for malignant/paramalignant effusion, 46 (27.5%. Others were trauma, 44 (26.3%, Parapneumonic effusion, 20 (12%, postthoracotomy 14 (8.4%, empyema thoracis 12 (7.2%, heart disease and tuberculous effusion 11 (6.6% each, pneumothorax 8 (4.8% and misdiagnosis 1 (0.6%. A hundred and one (60.5% of the procedures were performed by registrars, 41 (24.6% by consultants, house officers 15 (9% and senior registrars 10 (6%. The overall complication rate was 16.8% with the more frequent complications been empyema (5.6% and pneumothorax (3.6%. The average duration of tube placement was 13.02 ± 12.362 days and range of 1-110 days. Conclusion : Tube thoracostomy can be a relatively safe procedure with acceptable complication rates even with improvised underwater seal drainage bottles.

  16. Indications and Complications of Tube Thoracostomy with Improvised Underwater Seal Bottles

    Science.gov (United States)

    Edaigbini, Sunday A; Delia, Ibrahim Z; Aminu, Muhammad B; Orogade, Abosede A; Anumenechi, Ndubuisi; Aliyu, Ibrahim D

    2014-01-01

    Background: Tube thoracostomy is a lifesaving and frequently performed procedure in hospitals where the expertise and necessary tools are available. Where the ideal drainage receptacle is unavailable, the underwater seal device can be improvised with bottled water plastic can especially in emergency situations. Aims and Objectives: To determine the frequencies of the various indications and complications of tube thoracostomy with improvised underwater seal. Materials and Methods: A cross-sectional study with a structured proforma was used for assessment over a 3-year period (May 2010-April 2013). The proforma was filled at the time of the procedure by the performing surgeon and patients were followed up with serial chest X-rays until certified cured. A 1.5 L bottled water container was used as the underwater seal receptacle. The data was analysed with SPSS 15 software program. Results: A total of 167 patients were managed. There were 106 (63.5%) males and 61 (36.5%) females. The mean age was 34.85 ± 16.72 with a range of 1-80 years. The most frequent indication was for malignant/paramalignant effusion, 46 (27.5%). Others were trauma, 44 (26.3%), Parapneumonic effusion, 20 (12%), postthoracotomy 14 (8.4%), empyema thoracis 12 (7.2%), heart disease and tuberculous effusion 11 (6.6%) each, pneumothorax 8 (4.8%) and misdiagnosis 1 (0.6%). A hundred and one (60.5%) of the procedures were performed by registrars, 41 (24.6%) by consultants, house officers 15 (9%) and senior registrars 10 (6%). The overall complication rate was 16.8% with the more frequent complications been empyema (5.6%) and pneumothorax (3.6%). The average duration of tube placement was 13.02 ± 12.362 days and range of 1-110 days. Conclusion: Tube thoracostomy can be a relatively safe procedure with acceptable complication rates even with improvised underwater seal drainage bottles. PMID:25191098

  17. Sustainable Recycling of PET Bottles in Rio de Janeiro Title: Reciclaje Sostenible de Botellas de PET en Rio de Janeiro

    OpenAIRE

    Luiz Edmundo Costa Leite; José Henrique Penido Monteiro

    2003-01-01

    This work presents a case study on solid waste management in the city of Rio de Janeiro. This privately-owned initiative involves the application of market instruments to boost the recycling of used plastic bottles.Abstract: Este trabajo presenta un estudio de caso exitoso implementado en la ciudad de Rio de Janeiro, Brasil, evidenciando la utilización de un instrumento basado en el mercado con el propósito de perfeccionar la calidad de los servicios de aseo urbano de la ciudad. En esto estud...

  18. Migration of antimony from PET bottles into beverages: determination of the activation energy of diffusion and migration modelling compared with literature data.

    Science.gov (United States)

    Welle, F; Franz, R

    2011-01-01

    Plastics bottles made from polyethylene terephthalate (PET) are increasingly used for soft drinks, mineral water, juices and beer. In this study a literature review is presented concerning antimony levels found both in PET materials as well as in foods and food simulants. On the other hand, 67 PET samples from the European bottle market were investigated for their residual antimony concentrations. A mean value of 224 ± 32 mg kg(-1) was found, the median was 220 mg kg(-1). Diffusion coefficients for antimony in PET bottle materials were experimentally determined at different temperature between 105 and 150°C. From these data, the activation energy of diffusion for antimony species from the PET bottle wall into beverages and food simulants was calculated. The obtained value of 189 kJ mol(-1) was found to be in good agreement with published data on PET microwave trays (184 kJ mol(-1)). Based on these results, the migration of antimony into beverages was predicted by mathematical migration modelling for different surface/volume ratios and antimony bottle wall concentrations. The results were compared with literature data as well as international legal limits and guidelines values for drinking water and the migration limit set from food packaging legislation. It was concluded that antimony levels in beverages due to migration from PET bottles manufactured according to the state of the art can never reach or exceed the European-specific migration limit of 40 microg kg(-1). Maximum migration levels caused by room-temperature storage even after 3 years will never be essentially higher than 2.5 microg kg(-1) and in any case will be below the European limit of 5 microg kg(-1) for drinking water. The results of this study confirm that the exposure of the consumer by antimony migration from PET bottles into beverages and even into edible oils reaches approximately 1% of the current tolerable daily intake (TDI) established by World Health Organisation (WHO). Having

  19. Effects of Velocity-Slip and Viscosity Variation in Squeeze Film Lubrication of Two Circular Plates

    Directory of Open Access Journals (Sweden)

    R.R. Rao

    2013-03-01

    Full Text Available A generalized form of Reynolds equation for two symmetrical surfaces is taken by considering velocity-slip at the bearing surfaces. This equation is applied to study the effects of velocity-slip and viscosity variation for the lubrication of squeeze films between two circular plates. Expressions for the load capacity and squeezing time obtained are also studied theoretically for various parameters. The load capacity and squeezing time decreases due to slip. They increase due to the presence of high viscous layer near the surface and decrease due to low viscous layer.

  20. Decoherence of two-qubit system in a non-Markovian squeezed reservoir

    Institute of Scientific and Technical Information of China (English)

    Wang Fa-Qiang; Zhang Zhi-Ming; Liang Rui-Sheng

    2009-01-01

    The decoherence of two initially entangled qubits coupled with a squeezed vacuum cavity separately is investigated exactly. The results show that, first, in principle, the disentanglement time decreases with the increase of squeeze parameter r, due to the augmenting of average photon number of every mode in the squeezed vacuum cavity. Second, there appear entanglement revivals after the complete disentanglement for the case of even parity initial Bell state, while there occur the entanglement decrcase and the entanglement revival before the complete disentanglement for the case of odd parity initial Bell state. The results are quite different from those for the case of qubits in a vacuum cavity.