Silver nanoparticle release from commercially available plastic food containers into food simulants

DEFF Research Database (Denmark)

Mackevica, Aiga; Olsson, Mikael Emil; Hansen, Steffen Foss

2016-01-01

. In the current study, we investigated four brands of commercially available plastic food storage containers and measured the total amount of silver, particle size and number concentration, and the migration rates into three different food simulants (Milli-Q grade water, 10 % ethanol, and 3 % acetic acid) for 10...... days at 40 °C. The experimental setup was made according to the European Commission Directive (EU 10/2011) for articles intended to be in contact with food. The total amount of silver in plastic containers and migration solutions was quantified by ICP-MS analysis, and the size of the migrated particles...... was investigated by single particle ICP-MS and TEM-EDS. The total mass and median size of released particulate Ag were generally highest in 3 % acetic acid for three out of four food container brands. The total content of silver in the containers varied from 13 to 42 µg/g. The highest migration was observed...

Stability of color in Spanish-style green table olives pasteurized and stored in plastic containers.

Science.gov (United States)

Sánchez, Antonio Higinio; López-López, Antonio; Beato, Víctor Manuel; de Castro, Antonio; Montaño, Alfredo

2017-08-01

There is an increasing interest in the use of pasteurizable plastic packaging by the olive industry. In order to investigate the change from traditional glass or varnished can containers to plastic packaging, the proper plastic material that is compatible with fermented olives while maintaining color quality during pasteurization treatment and storage must be selected. This work is focused on color stability in two distinct pasteurizable plastic containers with different oxygen permeability. In PET + MDPE/EVOH (polyethylene terephthalate + medium-density polyethylene/ethylene vinyl alcohol) pouches, pasteurization provoked severe browning which drastically decreased their color shelf life ( 6.5 months). The plastic material had a significant effect on the retention of color of the pasteurized product. The use of AlOx-coated PET + MDPE pouches could be an alternative to traditional packaging for the pasteurization and storage of Spanish-style green olives from a color quality standpoint. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Experimental investigation on the properties of concrete containing post-consumer plastic waste as coarse aggregate replacement

Directory of Open Access Journals (Sweden)

Zasiah TAFHEEM

2018-03-01

Full Text Available The consumption of various forms of plastic has been increased in recent days due to the boost in industrialization and other human activities. Most of the plastic wastes are abandoned and require large landfill area for storage. More importantly, the low biodegradability of plastic poses a serious threat to environment protection issue. Various methods have been followed for the disposal of plastic in an attempt to reduce the negative impact of the plastic on the environment. Recently, various types of plastic have been incorporated in concrete to minimize the exposure of plastic to the environment. The aim of this study is to investigate the properties of concrete containing polyethylene terephthalate (PET, and high density polyethylene (HDPE plastic that were used as partial replacement of coarse aggregate (CA. In this study, four compositions of stone aggregate(S: plastic waste ratios have been used by volume basis: 100% S: 0% Plastic (control concrete, 90% S: 10% PET, 90% S: 10% HDPE, and 90% S: 5% PET+5% HDPE. The effects of waste plastic addition on the mechanical properties of concrete are presented in this paper. Test results reveal that minimum reduction in compressive strength has been found 35% in case of 10% PET plastic replaced concrete whereas splitting tensile strength for 10% PET replaced concrete has been increased by 21% while compared to control concrete. In addition, fresh unit weight of concrete containing plastic waste has been decreased by 4% in comparison to control concrete.

Improving Public Health and Environment through Plastic Waste Management in Mumbai Metropolitan Region

Directory of Open Access Journals (Sweden)

Sanjay RODE

2015-12-01

Full Text Available The Mumbai Metropolitan Region is growing in terms of population, industry, educational and commercial units. The daily requirements of commodities and services by all units have increased fast. Plastic is used extensively for packing, protection and service of various commodities. The use of plastic is much higher by industry and households in region. In Brihan Mumbai Municipal Corporation, the density of population is higher. The concentration of small and large industries is more. Therefore the plastic use is much higher for different purposes. It leads to more waste of plastic. In Ulhasnagar Municipal Corporation, the population and industrial units are less. Therefore plastic waste is less generated. Theaters are generating less plastic waste in metropolitan region. The Brihan Mumbai Municipal Corporation (BMC and municipal corporations in Thane district will continuously generate more plastic waste in future. The Tobit regression model shows that plastic waste is positively co-related and statistically significant with pollution and industry in region. Therefore the comprehensive policies are required to reduce plastic waste. This is because plastic waste is affecting on the health of human being. It also affects negatively on soil, air and water. The entire food supply chain gets affected due to plastic waste. The water logging is common due to plastic waste in region. It chock ups the drainage system and it becomes the ground for mosquitoes. It further leads to dengue, malaria and other diseases in region. Municipal corporations must collect plastic in separate bins and process it. The plastic and e-waste can be utilized for road construction in region. All the policies will certainly help to reduce the plastic waste and maintain the clean environment in region.

Bottles to trees: Plastic beverage bottles as an alternative nursery growing container for reforestation in developing countries

Science.gov (United States)

Khurram, Safiullah; Burney, Owen T.; Morrissey, Robert C.

2017-01-01

Reforestation is needed globally to help restore degraded sites, combat desertification, protect watersheds, and provide forest products. This involves planting forest tree seedlings grown in local nurseries, but technologies to produce quality seedlings are lacking in developing countries. Modern nursery containers used to propagate seedlings have internal-surface barriers (ribs or ridges) or side-slits to prevent root spiraling. These are cost prohibitive or unavailable in developing countries and so polybags (plastic bags) are more commonly used, despite their tendency to produce seedlings with deformed root systems that have less potential to establish on field sites. Discarded plastic bottles, which are readily available worldwide, may be a feasible alternative for seedling propagation. We conducted two experiments to assess the potential of repurposed plastic beverage bottles to grow quality trees: 1) Container Comparison–to evaluate Arizona walnut (Juglans major [Toor.] Heller) and Afghan pine (Pinus eldarica Medw.) seedling root and shoot development in two plastic bottle types compared to modern nursery containers and polybags, and 2) Bottle Modification–to examine the effects of root spiraling prevention techniques (side-slits, internal-ridges, and control) and container opacity (green, black, and clear) on Afghan pine seedling morphological attributes. Nursery growth and first-year seedling field performance were evaluated for both experiments. In experiment one, seedlings of both species had fewer spiraled roots in bottle containers compared to polybags. Arizona walnut had more fibrous root systems in polybags, while Afghan pine root system fibrosity was greatest in bottle containers. First-year field performance of both species was not affected by container type. In experiment two, less spiraled roots occurred in containers with air-slits and interior-ridges compared to the control. The effects of container opacity on seedling morphology were

Kinetic Modeling of the Release of Ethylene Oxide from Sterilized Plastic Containers and its Interaction with Monoclonal Antibodies.

Science.gov (United States)

Yu, Bryan Lei; Han, Jun; Hammond, Matthew; Wang, Xuemei; Zhang, Qingchun; Clausen, Andrew; Forster, Ronald; Eu, Mingda

Ethylene oxide (ETO) is commonly used to sterilize plastic containers, but the effects of residual amounts left after sterilization on protein therapeutics are still not well understood. Here we focus primarily on the factors that influence concentrations of ETO migrating from ETO-treated plastic containers into aqueous solution. A study was designed to investigate the kinetics of this process at various temperatures, and the kinetic data could be fit with a model based on a combination of Fickean diffusion and first-order chemical reaction (to account for observed hydrolysis of ETO). The diffusion and reaction rate constants thus obtained obey Arrhenius-like temperature dependence. These results indicate that for analytical methods involving extraction into water, measurements of residual ETO in a container must account for the effects of ETO hydrolysis. Further, the effects of salt concentration and pH of the fluid in the container on accumulated ETO levels were explored. Finally, interactions of ETO with anti-streptavidin (AntiSA) Immunoglobulin G1 (IgG1) and IgG2 antibodies were studied, with ETO adducts found on all methionine residues when incubated in solutions spiked with ETO at concentrations that could be reached (based on the kinetic studies) in ETO-treated plastic vials. Overall, the likelihood of observable ETO-protein modifications upon storage in ETO-sterilized containers will depend on a complex interplay of protein properties, formulation details, storage conditions, and amount of residual ETO initially in the container. Ethylene oxide (ETO) is commonly used to sterilize plastic containers, but the effects of residual amounts left after sterilization on protein therapeutics are still not well understood. Here we describe experiments exploring the factors that influence concentrations of ETO migrating from ETO-treated plastic containers into aqueous solution over time. Additionally, interactions of ETO with model antibodies were studied, with ETO

The Russia Corporate Governance Manual : Part I. Corporate Governance Introduced

OpenAIRE

International Finance Corporation; U.S. Department of Commerce

2004-01-01

The Russia corporate governance manual has been divided into and is published in six parts: (i) corporate governance introduced; (ii) good board practices; (iii) shareholder rights; (iv) information disclosure and transparency; (v) special focus section; and (vi) annexes model corporate governance documents. The first four parts contain chapters that focus on core corporate governance issu...

SYNTHESIS AND CHARACTERIZATION OF HDPE PLASTIC FILM FOR HERBICIDE CONTAINER USING FLY ASH CLASS F AS FILLER

Directory of Open Access Journals (Sweden)

Yatim Lailun Ni’mah

2010-06-01

Full Text Available High Density Polyethylene (HDPE plastic plays an important role in various applications, for example, it can be used as a container (bottle. Petrokimia Kayaku Company, a branch of Petrokimia Company of Gresik, produces herbicides using HDPE plastic bottles as their container. Those plastic bottles undergo degradation (kempot for certain period of time. The aim of this research is to characterize and to synthesize the HDPE plastic film with class F fly ash as filler. The results expected from this research are producing the plastic with a better properties and durability. This research was initiated by taking the sample of HDPE plastic bottle and herbicides (containing Gramakuat, on active material parakuat dichloride at Petrokimia Kayaku Company. Both the initial HDPE and the degraded bottles was analyzed their tensile strength and Fourier Transform-Infra Red (FTIR spectral. The next step was to synthesize the HDPE plastic film using class F fly ash as filler and a coupling agent. The filler concentrations were 0%, 5%, 10%, 15%, and 20wt %. The best result was 5% filler concentration with tensile strength of 27.7 lbs. This HDPE film was then subjected to degradation test using pyridine solution with various concentrations (1%, 3% and 5% for two weeks, thermal degradation at 100 °C for two weeks and chemical resistance by xylene with soak time variation of 24 h, 98 h and 168 h. The result of degradations test show that the value of tensile strength was decreased with the increase of filler consentration. The chemical resistance, however, was increased.   Keywords: degradation, filler, fly ash, HDPE, Herbicide

Reduction of non-specific adsorption of drugs to plastic containers used in bioassays or analyses.

Science.gov (United States)

Fukazawa, Tominaga; Yamazaki, Yuri; Miyamoto, Yohei

2010-01-01

Non-specific adsorption (NSA) of drugs to plastic or glass containers used in clinical use is well known, but methods for reducing NSA have been rarely reported. We assessed the NSA to various containers and then investigated methods to reduce NSA. Probe drugs (methotrexate, warfarin, chloroquine, propranolol, verapamil, digoxin and paclitaxel) dissolved in water were incubated in conventional or low-adsorption containers for 4h at 4 degrees C and the NSA was determined by HPLC. They were also dissolved in aqueous methanol or acetonitrile and the NSA to a conventional polypropylene microplate was determined. Finally, tissue culture microplates were coated with silane coupling agents and the effects of the coatings were evaluated. Hydrophobic drugs (paclitaxel, verapamil and digoxin) were highly adsorbed to conventional plastic microplates, but in addition to hydrophobic drugs, positively charged drugs were well adsorbed to the tissue culture microplate. Low-adsorption microplates could reduce NSA below 15%, but positively charged or neutral hydrophobic drugs showed relatively higher adsorption. Acetonitrile showed stronger NSA inhibition than that of methanol, but the peak shapes of methotrexate and chloroquine were broadened and split. Among the silane coupling agents, GPTMS suppressed the NSA below 10%. Also, AATMS resembled the NSA pattern of GPTMS, but it increased the adsorption of methotrexate to 29%. On conventional plastic microplates, NSA is mainly driven by hydrophobic interactions, but on tissue culture microplates and low-adsorption microplates, in addition to hydrophobic interactions, ionic interactions play a role in the NSA. Therefore, to reduce the NSA to plastic containers, both hydrophobic and ionic interactions should be reduced using amphiphilic organic solvents or neutral and hydrophilic coatings. 2010 Elsevier Inc. All rights reserved.

Silver nanoparticle release from commercially available plastic food containers into food simulants

International Nuclear Information System (INIS)

Mackevica, Aiga; Olsson, Mikael Emil; Hansen, Steffen Foss

2016-01-01

Silver nanoparticles (AgNPs) are currently being used in many different kinds of consumer products in order to take advantage of their antimicrobial properties. However, the potential migration of silver nanoparticles into food and subsequent consumer exposure has hardly been addressed. In the current study, we investigated four brands of commercially available plastic food storage containers and measured the total amount of silver, particle size and number concentration, and the migration rates into three different food simulants (Milli-Q grade water, 10 % ethanol, and 3 % acetic acid) for 10 days at 40 °C. The experimental setup was made according to the European Commission Directive (EU 10/2011) for articles intended to be in contact with food. The total amount of silver in plastic containers and migration solutions was quantified by ICP-MS analysis, and the size of the migrated particles was investigated by single particle ICP-MS and TEM-EDS. The total mass and median size of released particulate Ag were generally highest in 3 % acetic acid for three out of four food container brands. The total content of silver in the containers varied from 13 to 42 µg/g. The highest migration was observed in the 3 % acetic acid food simulant for all four brands of containers, with total silver release up to 3.1 ng/cm 2 after 10 days. In conclusion, the experimental results show that silver has the potential of migrating into food, especially when in contact with more acidic substances

Silver nanoparticle release from commercially available plastic food containers into food simulants

Energy Technology Data Exchange (ETDEWEB)

Mackevica, Aiga, E-mail: aima@env.dtu.dk; Olsson, Mikael Emil; Hansen, Steffen Foss [Technical University of Denmark, Department of Environmental Engineering (Denmark)

2016-01-15

Silver nanoparticles (AgNPs) are currently being used in many different kinds of consumer products in order to take advantage of their antimicrobial properties. However, the potential migration of silver nanoparticles into food and subsequent consumer exposure has hardly been addressed. In the current study, we investigated four brands of commercially available plastic food storage containers and measured the total amount of silver, particle size and number concentration, and the migration rates into three different food simulants (Milli-Q grade water, 10 % ethanol, and 3 % acetic acid) for 10 days at 40 °C. The experimental setup was made according to the European Commission Directive (EU 10/2011) for articles intended to be in contact with food. The total amount of silver in plastic containers and migration solutions was quantified by ICP-MS analysis, and the size of the migrated particles was investigated by single particle ICP-MS and TEM-EDS. The total mass and median size of released particulate Ag were generally highest in 3 % acetic acid for three out of four food container brands. The total content of silver in the containers varied from 13 to 42 µg/g. The highest migration was observed in the 3 % acetic acid food simulant for all four brands of containers, with total silver release up to 3.1 ng/cm{sup 2} after 10 days. In conclusion, the experimental results show that silver has the potential of migrating into food, especially when in contact with more acidic substances.

Preparation and use of polymeric materials containing hydrophobic anions and plasticizers for separation of cesium and strontium

International Nuclear Information System (INIS)

Abney, K.D.; Kinkead, S.A.; Mason, C.F.V.; Rais, J.

1997-01-01

Preparation and use is described for polymeric materials containing hydrophobic anions and plasticizers for extraction of cesium and strontium. The use of polymeric materials containing plasticizers which are solvents for hydrophobic anions such as derivatives of cobalt dicarbollide or tetraphenylborate which are capable of extracting cesium and strontium ions from aqueous solutions in contact with the polymeric materials, is described. The polymeric material may also include a synergistic agent for a given ion like polyethylene glycol or a crown ether, for removal of radioactive isotopes of cesium and strontium from solutions of diverse composition and, in particular, for solutions containing large excess of sodium nitrate

Incidence of hypertriglyceridemia in critically ill neonates receiving lipid injectable emulsions in glass versus plastic containers: a retrospective analysis.

Science.gov (United States)

Martin, Camilia R; Dumas, Gregory J; Shoaie, Claire; Zheng, Zheng; Mackinnon, Brenda; Al-Aweel, Issa; Bistrian, Bruce R; Pursley, DeWayne M; Driscoll, David F

2008-02-01

To evaluate plasma clearance of lipid injectable emulsions packaged in either glass or plastic containers in neonates from 2 7-month periods, 1 year apart. Clinical records from June 1 to December 31, 2003 (glass [G] period) and the same months in 2004 (plastic [P] period) were assessed. Neonates who received lipid injectable emulsions were studied. Lipid container (glass vs plastic) was the independent variable. Of the 197 patients studied, 122 (G, 50/81; P, 72/116) had evaluable triglyceride (TG) levels, for an overall rate of 62%. Only birth weight (G, 1.09 +/- 0.32 kg vs P, 1.23 +/- .45 kg) and birth length (G, 36.4 +/- 3.5 cm vs P, 37.9 +/- 3.5 cm) were significantly different between the 2 groups (P = .047 and .028, respectively). There were no differences in the day of life on which lipid injection was started, the lipid dose, or the timing of TG measurements. The incidence of hypertriglyceridemia was significantly higher in the P period (G, 3/50 vs P, 19/72; P = .004). Administration of the same lipid formulation in plastic bags compared with glass containers is associated with higher rates of hypertriglyceridemia. The poorer clearance of lipids could be due to a higher proportion of large-diameter fat globules in plastic bags compared with those in glass containers.

Capturing Plastic Surgery on Film—Making Reconstruction Visible

Science.gov (United States)

Ismail, Tarek; Sarraf, Namita; Epple, Christian; Schaefer, Kristin Marit; Schaefer, Dirk J.

2017-01-01

Summary: The Swiss Plastic Surgery Association (https://plasticsurgery.ch/en/) decided to produce a corporate video to illustrate the concept of "plastic surgery of confidence" to the public. We show the diversity of specializations and the vast range of tasks that surgeons passionately handle day in and day out. We wanted to convey 2 main messages: first, that plastic surgery is more than just cosmetic surgery, and second, that plastic surgery in Switzerland is synonymous with quality and confidence. We selected 17 topics that we felt had good filmic potential and would best explain to the public what plastic surgery is about. This included the selection of appropriate patients, experts, and locations from all over the country. We thought it crucial to show the initial preoperative situation, as only in this case would the achievement of reconstruction be evident and comprehensive to the layman audience. The actual production was filmed in 5 different locations and took 5 days of shooting. We recorded 17 surgeons, 9 patients, and about 30 voluntary background actors. From 23 hours of footage, we created a 7 minute, 22 second corporate video, recorded in 3 of the Swiss national languages. The video was presented to the public online in June 2016, on the same day as the National Open Day of Plastic Surgery in Switzerland. The video is available online. We evaluated the impact of the video using a questionnaire for lay people and observed that it could substantially improve the perception of our specialty, especially regarding the reconstructive aspect. We feel that a freely available corporate video is a very useful means to promote plastic surgery and help patients better understand what it is all about. PMID:29062635

Capturing Plastic Surgery on Film—Making Reconstruction Visible

Directory of Open Access Journals (Sweden)

Alexander Lunger, MD

2017-09-01

Full Text Available Summary:. The Swiss Plastic Surgery Association (https://plasticsurgery.ch/en/ decided to produce a corporate video to illustrate the concept of "plastic surgery of confidence" to the public. We show the diversity of specializations and the vast range of tasks that surgeons passionately handle day in and day out. We wanted to convey 2 main messages: first, that plastic surgery is more than just cosmetic surgery, and second, that plastic surgery in Switzerland is synonymous with quality and confidence. We selected 17 topics that we felt had good filmic potential and would best explain to the public what plastic surgery is about. This included the selection of appropriate patients, experts, and locations from all over the country. We thought it crucial to show the initial preoperative situation, as only in this case would the achievement of reconstruction be evident and comprehensive to the layman audience. The actual production was filmed in 5 different locations and took 5 days of shooting. We recorded 17 surgeons, 9 patients, and about 30 voluntary background actors. From 23 hours of footage, we created a 7 minute, 22 second corporate video, recorded in 3 of the Swiss national languages. The video was presented to the public online in June 2016, on the same day as the National Open Day of Plastic Surgery in Switzerland. The video is available online. We evaluated the impact of the video using a questionnaire for lay people and observed that it could substantially improve the perception of our specialty, especially regarding the reconstructive aspect. We feel that a freely available corporate video is a very useful means to promote plastic surgery and help patients better understand what it is all about.

Capturing Plastic Surgery on Film-Making Reconstruction Visible.

Science.gov (United States)

Lunger, Alexander; Ismail, Tarek; Sarraf, Namita; Epple, Christian; Schaefer, Kristin Marit; Schaefer, Dirk J

2017-09-01

The Swiss Plastic Surgery Association (https://plasticsurgery.ch/en/) decided to produce a corporate video to illustrate the concept of "plastic surgery of confidence" to the public. We show the diversity of specializations and the vast range of tasks that surgeons passionately handle day in and day out. We wanted to convey 2 main messages: first, that plastic surgery is more than just cosmetic surgery, and second, that plastic surgery in Switzerland is synonymous with quality and confidence. We selected 17 topics that we felt had good filmic potential and would best explain to the public what plastic surgery is about. This included the selection of appropriate patients, experts, and locations from all over the country. We thought it crucial to show the initial preoperative situation, as only in this case would the achievement of reconstruction be evident and comprehensive to the layman audience. The actual production was filmed in 5 different locations and took 5 days of shooting. We recorded 17 surgeons, 9 patients, and about 30 voluntary background actors. From 23 hours of footage, we created a 7 minute, 22 second corporate video, recorded in 3 of the Swiss national languages. The video was presented to the public online in June 2016, on the same day as the National Open Day of Plastic Surgery in Switzerland. The video is available online. We evaluated the impact of the video using a questionnaire for lay people and observed that it could substantially improve the perception of our specialty, especially regarding the reconstructive aspect. We feel that a freely available corporate video is a very useful means to promote plastic surgery and help patients better understand what it is all about.

Hazardous and other element characterization of new and used domestic plastic food containers using INAA and AAS

International Nuclear Information System (INIS)

Waheed, S.; Rahman, S.; Husnain, S.M.; Siddique, N.

2012-01-01

Instrumental neutron activation analysis (INAA) and flame atomic absorption spectroscopy (FAAS) methodology was developed to characterize the inorganic trace element constituents in new and used domestic plastic food containers. INAA was employed through the variation of irradiation, cooling and counting protocols for the determination of Al, Ba, Br, Co, Cr, Eu, Fe, Hg, K, Mn, Na, Nd, Sb, Sc, Th, Ti, V and Zn while FAAS was used to quantify toxic inorganic elements such as Cd, Pb and Cu. These elements are thought to originate from the polymer manufacturing processes. It was found that there was gradual increase in the concentration of most of these elements from new to used plastic samples. Moreover it was also observed that these inorganic elements are present in higher concentrations in the lower grade containers as compared to the high quality containers. It was also observed that the good quality containers even with the long usage do not degrade to such an extent as the low quality containers. (Orig./A.B.)

Migration of Phthalates from Plastic Containers into Soft Drinks and Mineral Water

Directory of Open Access Journals (Sweden)

Jasna Bošnir

2007-01-01

Full Text Available The aim of this study was to determine the level of phthalate migration from plastic containers to soft drinks and mineral water and to identify a possible relationship between the amount and type of phthalate migration, type of preservative used, and the pH of the sample. The analysis included 45 samples of products packed in containers made from polyethylene terephthalate. The samples were divided into 5 groups: group 1 (N=9, soft drinks preserved with orthophosphoric acid; group 2 (N=14, soft drinks preserved with Na-benzoate; group 3 (N=5, soft drinks preserved with K-sorbate; group 4 (N=8, soft drinks preserved with a combination of Na-benzoate and K-sorbate; and group 5 (N=9, mineral water without preservatives. The samples were analyzed by the method of gas chromatography, with a detection limit of 0.005 μg/L. The mean pool phthalate level and mean pH value were 91.67 μg/L and 2.82±0.30 in group 1; 116.93 μg/L and 2.75±0.32 in group 2; 819.40 μg/L and 2.88±0.15 in group 3; 542.63 μg/L and 2.82±0.54 in group 4; and 20.22 μg/L and 5.82±1.26 in group 5, respectively. The highest rate of migration to soft drinks was recorded for dimethyl phthalate, ranging from 53.51 to 92.73 %, whereas dibutyl phthalate and diethylhexyl phthalate showed highest rate of migration to the mineral water (56.04 and 43.42 %, respectively. The highest level of phthalate migration from plastic containers to soft drinks was found in the products preserved with K-sorbate. The rate of phthalate migration appears to be influenced also by the drink pH, i.e. the lower the pH value, the greater the phthalate migration. Dimethyl phthalate showed highest migration to preserved drinks as an acidic medium, which might stimulate modification in the composition of plastic containers according to the type and composition of the product. Additional studies in a greater number of samples are needed. Although the phthalate levels measured in these samples pose no risk for

Plastic dosimeter

International Nuclear Information System (INIS)

Nagai, Shiro; Matsuda, Kohji.

1988-01-01

The report outlines major features and applications of plastic dosimeters. Some plastic dosimeters, including the CTA and PVC types, detect the response of the plastic material itself to radiations while others, such as pigment-added plastic dosimeters, contain additives as radiation detecting material. Most of these dosimeters make use of color centers produced in the dosimeter by radiations. The PMMA dosimeter is widely used in the field of radiation sterilization of food, feed and medical apparatus. The blue cellophane dosimeter is easy to handle if calibrated appropriately. The rad-color dosimeter serves to determine whether products have been irradiated appropriately. The CTA dosimeter has better damp proofing properties than the blue cellophane type. The pigment-added plastic dosimeter consists of a resin such as nylon, CTA or PVC that contains a dye. Some other plastic dosimeters are also described briefly. Though having many advantages, these plastic dosimeter have disadvantages as well. Some of their major disadvantages, including fading as well as large dependence on dose, temperature, humidity and anviroment, are discussed. (Nogami, K.)

Recycling of Plastic

DEFF Research Database (Denmark)

Christensen, Thomas Højlund; Fruergaard, Thilde

2011-01-01

Plastic is produced from fossil oil. Plastic is used for many different products. Some plastic products like, for example, wrapping foil, bags and disposable containers for food and beverage have very short lifetimes and thus constitute a major fraction of most waste. Other plastic products like...

Formosa Plastics Corporation: Plant-Wide Assessment of Texas Plant Identifies Opportunities for Improving Process Efficiency and Reducing Energy Costs

Energy Technology Data Exchange (ETDEWEB)

None

2005-01-01

At Formosa Plastics Corporation's plant in Point Comfort, Texas, a plant-wide assessment team analyzed process energy requirements, reviewed new technologies for applicability, and found ways to improve the plant's energy efficiency. The assessment team identified the energy requirements of each process and compared actual energy consumption with theoretical process requirements. The team estimated that total annual energy savings would be about 115,000 MBtu for natural gas and nearly 14 million kWh for electricity if the plant makes several improvements, which include upgrading the gas compressor impeller, improving the vent blower system, and recovering steam condensate for reuse. Total annual cost savings could be $1.5 million. The U.S. Department of Energy's Industrial Technologies Program cosponsored this assessment.

Do single-use medical devices containing biopolymers reduce the environmental impacts of surgical procedures compared with their plastic equivalents?

Science.gov (United States)

Unger, Scott R; Hottle, Troy A; Hobbs, Shakira R; Thiel, Cassandra L; Campion, Nicole; Bilec, Melissa M; Landis, Amy E

2017-01-01

Background While petroleum-based plastics are extensively used in health care, recent developments in biopolymer manufacturing have created new opportunities for increased integration of biopolymers into medical products, devices and services. This study compared the environmental impacts of single-use disposable devices with increased biopolymer content versus typically manufactured devices in hysterectomy. Methods A comparative life cycle assessment of single-use disposable medical products containing plastic(s) versus the same single-use medical devices with biopolymers substituted for plastic(s) at Magee-Women's Hospital (Magee) in Pittsburgh, PA and the products used in four types of hysterectomies that contained plastics potentially suitable for biopolymer substitution. Magee is a 360-bed teaching hospital, which performs approximately 1400 hysterectomies annually. Results There are life cycle environmental impact tradeoffs when substituting biopolymers for petroplastics in procedures such as hysterectomies. The substitution of biopolymers for petroleum-based plastics increased smog-related impacts by approximately 900% for laparoscopic and robotic hysterectomies, and increased ozone depletion-related impacts by approximately 125% for laparoscopic and robotic hysterectomies. Conversely, biopolymers reduced life cycle human health impacts, acidification and cumulative energy demand for the four hysterectomy procedures. The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects. However, the significant agricultural inputs associated with manufacturing biopolymers exacerbate environmental impacts of products and devices made using biopolymers. Conclusions The integration of biopolymers into medical products is correlated with reductions in carcinogenic impacts, non-carcinogenic impacts and respiratory effects; however, the significant agricultural inputs associated

Hazardous and other element characterization of new and used domestic plastic food containers using INAA and AAS

International Nuclear Information System (INIS)

Waheed, S.; Rahman, S.; Husnain, S.M.; Siddique, N.

2012-01-01

Instrumental Neutron Activation Analysis (INAA) and Atomic Absorption Spectroscopy methodology was developed to characterize the hazardous and other inorganic trace element constituents in new and used domestic plastic food containers. INAA due to its non destructive, highly sensitive, multielement and low detection limits characteristics was found to be a good technique for the characterization of polymeric products. Through the variation of irradiation, cooling and counting protocols Al, Ba, Br, Co, Cr, Eu, Fe, Hg, K, Mn, Na, Nd, Sb, Sc, Th, Ti, V and Zn were determined, while Atomic Absorption Spectroscopy was used as complementary technique to quantify toxic inorganic elements such as Cd, Pb and Cu. These elements are thought to originate from the polymer manufacturing processes. It was found that there was gradual increase in the concentration of most of these elements from new to used plastic samples. Moreover it was also observed that these inorganic elements are present in higher concentrations in the lower grade containers as compared to the high quality containers. It was also observed that the good quality containers even with the long usage do not degrade to such an extent as the low quality containers. (author)

An Analysis of the Advantages of Reusable Plastic Containers in Strawberry Logistics : A Case Study of the Japan Agricultural Cooperative YOICHI

OpenAIRE

尾碕, 亨; 樋元, 淳一

2014-01-01

This article undertook a comparative analysis of cardboard boxes and reusable plastic containers and their impact on production logistics costs and the receipt prices of producers. The results showed that reusable plastic containers shortened logistical working hours, reduced production logistics costs and increased the receipt prices of the producer. However, exchange-value cannot realized if the quality of the farm product is not maintained, even if it is transported in superior packing con...

Assessment of stress-strain data suitable for finite-element elastic--plastic analysis of shipping containers

International Nuclear Information System (INIS)

Rack, H.J.; Knorovsky, G.A.

1978-09-01

Stress-strain data which describes the influence of strain rate and temperature on the mechanical response of materials presently being used for light water reactor fuel shipping containers have been assembled. Selection of data has been limited to that which is suitable for use in finite-element elastic--plastic analysis of shipping containers (e.g., they must include complete material history profiles). Based on this information, recommendations have been made for further work which is required to complete the necessary data base

Experimental analysis of plastic materials containing radionuclides for decontamination viability

International Nuclear Information System (INIS)

Tazaki, Kazue; Nakano, Mikio; Takehara, Teruaki; Ishigaki, Yasuhito; Nakagawa, Hideaki

2015-01-01

After the Fukushima Daiichi Nuclear Power Plant (FDNPP) accident on 11 March, 2011, the high radioactive dosage was found in polluted water for agriculture use at Baba, Haramachi, Minami-Soma, Fukushima Prefecture, Japan. Field experiment for decontamination of water had been studied by using commercial plastic materials. The agricultural water comes from Tetsuzan dam is full of radioactive-contaminated water. Experimental analysis showed that the plastic materials can take up radioactive elements for several months soaked in the polluted agricultural water. The quantitative analyses using X-ray fluorescence analysis, Ge semiconductor and scanning electron microscopy equipped with energy dispersive X-ray spectrometer (SEM-EDS), revealed the detection of the radionuclides on the plastic materials with diatom and clays. The results suggest the adsorption of radionuclides on the surface of plastic materials due to FDNPP accident. The plastic materials associated with clays and diatoms could be stronger carriers of radionuclides in the polluted water. Adherence of diatoms to the plastic fiber in the water for 7 months suggested that some plastic materials were taking up heavy metals (Zn, Ba, Pb, Sb) with radioactive elements (Cs etc.). Mechanisms by which radioactive pollutants and microorganisms are adsorbed onto and desorbed from clays at aqueous interface can be understood by combining chemical analysis with electron microscopy observation. (author)

Liquid, urea group-containing polyisocyanate mixtures and plastics derived therefrom

Energy Technology Data Exchange (ETDEWEB)

Buethe, I.; Marx, M.; Schoenleben, W.

1988-04-05

The invention relates to urea group-containing polyisocyanate mixtures which are liquid at room temperature and have an isocyanate group content of from 15 to 30 weight percent and a diphenylmethane diisocyanate content of from 55 to 90 weight percent. These mixtures are obtained through the reaction of polyoxyalkylene polyamines having a functionality of from 2 to 5 and an amine number from 20 to 250 with a polyisocyanate selected from the group consisting of: a mixture of diphenylmethane diisocyanates and polyphenyl polymethylene polysocyanates having a diphenylmethane diisocyanate content of from 55 to 90 wt%, or at least one diphenylmethane diisocyanate isomer. The polyisocyanate mixtures claimed in the invention are used to prepare dense or cellular polyurethane and/or polyisocyanurate plastics, in particular, flexible polyurethane foams.

Mechanical Properties of High Performance Concrete Containing Waste Plastic as Aggregate

Directory of Open Access Journals (Sweden)

Abdulkader Ismail Al-Hadithi

2015-08-01

Full Text Available The world's population growth and the increasing demand for new infrastructure facilities and buildings , present us with the vision of a higher resources consumption, specially in the form of more durable concrete such as High Performance Concrete (HPC . Moreover , the growth of the world pollution by plastic waste has been tremendous. The aim of this research is to investigate the change in mechanical properties of HPC with added waste plastics in concrete. For this purpose 2.5%, 5% and 7.5% in volume of natural fine aggregate in the HPC mixes were replaced by an equal volume of Polyethylene Terephthalate (PET waste , got by shredded PET bottles. The mechanical properties (compressive, splitting tensile, and flexural strength evaluated at the ages of (7 ,28, 56 and 91 days while the static modulus of elasticity tested at (28 and 91 days . The results indicated that HPC containing PET-aggregate presented lower compressive strength and static elasticity . The splitting strength displayed an arising trend at the initial stages, however, they have a tendency to decrease after a while. On the other hand, flexural strength results gave better modulus of rapture at all ages of curing , as compared with reference concrete specimens.

The pharmacopeial evolution of intralipid injectable emulsion in plastic containers: from a coarse to a fine dispersion.

Science.gov (United States)

Driscoll, David F

2009-02-23

On December 1, 2007, the United States Pharmacopeia (USP) adopted Chapter 729 entitled Globule Size Distribution in Lipid Injectable Emulsions that contains two globule sizing methods and criteria to measure the mean droplet diameter (MDD) and the large-diameter tail of the globule size distribution to meet pharmacopeial specifications. The first of these measures, as the intensity-weighted MDD expressed in nanometers, must be less than 500 nm. The second measure, as the volume-weighted percentage of fat greater than 5 microm or PFAT(5), must be less than 0.05%. These limits were first suggested in 2001 based on an analysis of 16 lipid injectable emulsions available worldwide. In 2004, the packaging of the innovator lipid emulsion product Intralipid was changed from conventional glass bottles to plastic containers in the U.S. A subsequent analysis of the emulsion in its new container showed it to be more coarse than its previous glass counterpart and now failed the PFAT(5) limit. In 2007, it was announced that Intralipid in plastic containers was reformulated to meet the pharmacopeial limits. To track the time course of its transition from a coarse to a fine dispersion, 31 lots of Intralipid with expiration dates spanning five years were investigated.

Use of recycled plastics in concrete: A critical review.

Science.gov (United States)

Gu, Lei; Ozbakkaloglu, Togay

2016-05-01

Plastics have become an essential part of our modern lifestyle, and the global plastic production has increased immensely during the past 50years. This has contributed greatly to the production of plastic-related waste. Reuse of waste and recycled plastic materials in concrete mix as an environmental friendly construction material has drawn attention of researchers in recent times, and a large number of studies reporting the behavior of concrete containing waste and recycled plastic materials have been published. This paper summarizes the current published literature until 2015, discussing the material properties and recycling methods of plastic and the influence of plastic materials on the properties of concrete. To provide a comprehensive review, a total of 84 studies were considered, and they were classified into sub categories based on whether they dealt with concrete containing plastic aggregates or plastic fibers. Furthermore, the morphology of concrete containing plastic materials is described in this paper to explain the influence of plastic aggregates and plastic fibers on the properties of concrete. The properties of concretes containing virgin plastic materials were also reviewed to establish their similarities and differences with concrete containing recycled plastics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Plastic value chains

DEFF Research Database (Denmark)

Baxter, John; Wahlstrom, Margareta; Zu Castell-Rüdenhausen, Malin

2014-01-01

Optimizing plastic value chains is regarded as an important measure in order to increase recycling of plastics in an efficient way. This can also lead to improved awareness of the hazardous substances contained in plastic waste, and how to avoid that these substances are recycled. As an example......, plastics from WEEE is chosen as a Nordic case study. The project aims to propose a number of improvements for this value chain together with representatives from Nordic stakeholders. Based on the experiences made, a guide for other plastic value chains shall be developed....

Strength analyses of containment steel liner at the plasticity instability

International Nuclear Information System (INIS)

Klyashchitskij, V.I.; Golyakov, V.I.; Kostylev, V.I.; Margolin, B.Z.

2003-01-01

The steel liner of NPP containment plays the important role of a leak-tight contour preventing the possible releases of radioactive substances beyond the boundaries of the reactor building. However, so far in many cases an assessment of strain-stress state of the liner having initial imperfections of the shape was made with approximate methods. A new methodology for the analysis of the liner at the plasticity instability was developed at Atomenergoproekt institute in cooperation with specialists from other agencies. The methodology is based on code 'Termit'. Assessment of the critical strain was made taking into account possible presence of one or two defects: construction undercut or crack-like defect in a weld. On the base of the real structure analyses under any combinations of quasi-static loads the algorithm was developed for the computation of the liner. (author)

Plastic food packaging and health

Directory of Open Access Journals (Sweden)

Raika Durusoy

2011-02-01

Full Text Available Plastics have a wide usage in our daily lives. One of their uses is for food packaging and food containers. The aim of this review is to introduce different types of chemicals that can leach from food packaging plastics into foods and cause human exposure and to mention their effects on health. The types of plastics were reviewed under the 13 headings in Turkish Codex Alimentarius and plastics recycling symbols were provided to enable the recognition of the type of plastic when applicable. Chemicals used during the production and that can cause health risks are investigated under the heading of the relevant type of plastic. The most important chemicals from plastic food packaging that can cause toxicity are styrene, 1,3-butadiene, melamine, formaldehyde, acrylamide, di-2-ethylhexyl phthalate, di-2-ethylhexyl adipate, vinyl chloride and bisphenol A. These chemicals have endocrine disrupting, carcinogenic and/or development disrupting effects. These chemicals may leach into foods depending on the chemical properties of the plastic or food, temperature during packaging, processing and storage, exposure to UV and duration of storage. Contact with fatty/oily or acidic foods, heating of the food inside the container, or drinking hot drinks from plastic cups, use of old and scratched plastics and some detergents increase the risk of leaching. The use of plastic containers and packaging for food and beveradges should be avoided whenever possible and when necessary, less harmful types of plastic should be preferred. [TAF Prev Med Bull 2011; 10(1.000: 87-96

Data on thermal conductivity, water vapour permeability and water absorption of a cementitious mortar containing end-of-waste plastic aggregates

OpenAIRE

Di Maio, Luciano; Coppola, Bartolomeo; Courard, Luc; Michel, Frédéric; Incarnato, Loredana; Scarfato, Paola

2018-01-01

The data presented in this article are related to the research article entitled “Hygro-thermal and durability properties of a lightweight mortar made with foamed plastic waste aggregates ” (Coppola et al., 2018). This article focuses the attention on thermal conductivity, water vapour permeability and water absorption of a lightweight cementitious mortar containing foamed end-of-waste plastic aggregates, produced via foam extrusion process. Thermal conductivity, water vapour permeability ...

Recycling of plastic waste: Presence of phthalates in plastics from households and industry

DEFF Research Database (Denmark)

Pivnenko, Kostyantyn; Eriksen, Marie Kampmann; Martín-Fernández, J. A.

2016-01-01

Plastics recycling has the potential to substitute virgin plastics partially as a source of raw materials in plastic product manufacturing. Plastic as a material may contain a variety of chemicals, some potentially hazardous. Phthalates, for instance, are a group of chemicals produced in large...... recognised, the influence of plastic recycling on phthalate content has been hypothesised but not well documented. In the present work we analysed selected phthalates (DMP, DEP, DPP, DiBP, DBP, BBzP, DEHP, DCHP and DnOP) in samples of waste plastics as well as recycled and virgin plastics. DBP, DiBP and DEHP...

Corporate plan 1989

International Nuclear Information System (INIS)

1988-12-01

The paper presents the United Kingdom Science and Engineering Research Council's second Corporate Plan 1989. The Corporate Plan comprises statements of the current objectives of the Astronomy and Planetary Science Board, the Engineering Board, the Nuclear Physics Board, the Atmospheric Sciences and Computing Centre, along with a discussion of the mechanisms for their attainment. The Annex contains a description of some scientific highlights between 1985-1989, as well as a review of progress between 1984-5 to 1987-8. (U.K.)

Thermoelastic/plastic analysis of waste-container sleeve. II. Influence of large displacements on sleeve loading. Technical memorandum report RSI-0017

International Nuclear Information System (INIS)

Pariseau, W.G.

1975-01-01

Modification of the thermoelastic/plastic finite element program to account for large displacements possibly associated with the development of an extensive plastic zone about a radioactive waste container emplaced in a typical repository room (SALT-4/T model) has been completed. Comparisons of radial stresses acting on the waste container and borehole wall displacements computed by the modified and conventional analyses techniques reveal little difference between the two sets of results over a 10 year heating period for salt strengths 25 percent of original values. Because no significant differences in results arise even under these exaggerated conditions, the more costly large displacement option need be used only sparingly as an occasional control check on the conventional procedure. As a consequence, economy of computer run time can be maintained without sacrifice of accuracy

[Development of injection containers for patient and medical staff].

Science.gov (United States)

Kawasaki, Yoichi; Sendo, Toshiaki

2015-01-01

Recently, there has been a transition from glass to plastic injection containers in Japan. In our previous study, we suggested that plastic containers had less impurity contamination than glass containers. However, the use of some plasticizers has been limited because of their endocrine disrupting effects. Therefore, contamination has been a concern due to chemicals in injection solution packed with plastic containers. Indeed, in our recent study, photoinitiators were detected in an injection solution coming from plastic containers. Photoinitiators mainly exist in ink. We therefore speculated that ink originating from a photoinitiator directly printing on plastic containers had migrated into the injection solutions. In a clinical setting, plastic containers are very tractable because they are lightweight and less breakable. On the other hand, from a safety view point, these containers may be hazardous because of permeation by steam, ambient air or photoinitiators. In the present symposium, we will discuss the risk of photoinitiators leaking into injection solution packed with plastic containers, and countermeasures to avoid this risk.

Alternative plasticizer, 4-cyclohexene-1,2-dicarboxylic acid dinonyl ester, for blood containers with protective effects on red blood cells and improved cold resistance.

Science.gov (United States)

Morishita, Yuki; Nomura, Yusuke; Fukui, Chie; Fujisawa, Ayano; Watanabe, Kayo; Fujimaki, Hideo; Kumada, Hidefumi; Inoue, Kaoru; Morikawa, Tomomi; Takahashi, Miwa; Kawakami, Tsuyoshi; Sakoda, Hideyuki; Mukai, Tomokazu; Yuba, Toshiyasu; Inamura, Ken-Ichi; Tanoue, Akito; Miyazaki, Ken-Ichi; Chung, Ung-Il; Ogawa, Kumiko; Yoshida, Midori; Haishima, Yuji

2018-04-01

Di (2-ethylhexyl) phthalate (DEHP), a typical plasticizer used for polyvinyl chloride (PVC), is eluted from PVC-made blood containers and protects against red blood cell (RBC) hemolysis. However, concerns have arisen regarding the reproductive and developmental risks of DEHP in humans, and the use of alternative plasticizers for medical devices has been recommended worldwide. In this study, we propose that the use of a novel plasticizer, 4-cyclohexene-1,2-dicarboxylic acid dinonyl ester (DL9TH), could help produce more useful and safe blood containers. PVC sheet containing DL9TH and di (2-ethylhexyl) 4-cyclohexene-1,2-dicarboxylate (DOTH) provides comparable or superior protective effects to RBCs relative to PVC sheet containing DEHP or di-isononyl-cyclohexane-1,2-dicarboxylate (DINCH ® , an alternative plasticizer that has been used in PVC sheets for blood containers). The total amount of plasticizer eluted from DOTH/DL9TH-PVC sheets is nearly the same as that eluted from DEHP-PVC sheets. In addition, DOTH/DL9TH-PVC has better cold resistance than DEHP- and DINCH ® -PVC sheets. In vitro and in vivo tests for biological safety based on International Organization for Standardization guidelines (10993 series) suggest that the DOTH/DL9TH-PVC sheet can be used safely. Subchronic toxicity testing of DL9TH in male rats in accordance with the principles of Organisation for Economic Co-operation and Development Test Guideline 408 showed that DL9TH did not induce adverse effects up to the highest dose level tested (717 mg/kg body weight/day). There were no effects on testicular histopathology and sperm counts, and no indications of endocrine effects: testosterone, thyroid-stimulating hormone, follicle-stimulating hormone, and 17β-estradiol were unchanged by the treatment, compared with the control group. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1052-1063, 2018. © 2017 Wiley Periodicals, Inc.

Life Cycle Assessment of Lubricant Oil Plastic Containers in Brazil

Directory of Open Access Journals (Sweden)

Maria Clara Oliveira

2017-04-01

Full Text Available Brazil, like many emerging countries, has experienced a fast growth in the demand for automobiles in recent decades. This has produced a significant increase in the amount of hazardous waste to be disposed of, including used lubricant oil. Restrictive regulations are being used by many nations to deal with this problem, focusing on treatments, such as recycling, to avoid resource depletion. Specific rules for disposal of used lubricant oil already exist in various countries, including Brazil, but not for its containers. Using the life cycle assessment methodology, this article evaluates different management options for the destination of Lubricant Oil Plastic Containers (LOPCs, comparing recycling and incineration to disposal in an industrial landfill. Results show that reducing the proportion of LOPCs destined to the landfill has positive impacts in lowering the burdens caused in the life cycle of LOPCs. Incineration, which is not a technology used for destination of LOPCs in Brazil, proved to be a promising option when combined with recycling for treatment of this kind of waste. Combining different destinations is also a good option as long as economic, logistics and the environment are taken into consideration. The present paper concludes that emerging countries are able to manage hazardous waste provided that there is adequate legislation and political will along with cooperation from the private sector. This study can be helpful to the decision-making processes concerning hazardous waste, especially for industrial strategies and policy makers.

Energy Information Data Base: corporate author entries

International Nuclear Information System (INIS)

1980-03-01

One of the controls for information entered into the data bases created and maintained by the DOE Technical Information Center is the standardized name for the corporate entity or the corporate author. The purpose of Energy Information Data Base: Corporate Author Entries (TID-4585-R1) and this supplemental list of authorized or standardized corporate entries is to provide a means for the consistent citing of the names of organizations in bibliographic records. In general, an entry in Corporate Author Entries consists of the seven-digit code number assigned to the particular corporate entity, the two-letter country code, the largest element of the corporate name, the location of the corporate entity, and the smallest element of the corporate name (if provided). This supplement [DOE/TIC-4585-R1(Suppl.5)] contains additions to the base document (TID-4585-R1) and is intended to be used with that publication

Thermal-Hydraulic Analysis of the Nuclear Power Engineering Corporation Containment Experiments with GOTHIC

International Nuclear Information System (INIS)

Wiles, Lawrence E.; George, Thomas L.

2003-01-01

GOTHIC version 7.0 was used to model five tests that were conducted in the Nuclear Power Engineering Corporation facility in Japan. The tests involved steam and helium injection into a preheated, spray-moderated, 1/4-scale model of a pressurized water reactor dry containment. Comparison of GOTHIC predictions to measured data for pressure, vapor temperatures, structure surface temperatures, and helium concentrations provided the opportunity to evaluate methods for modeling gas dispersion, drop heat and mass transfer, and surface heat transfer.The test facility includes three floors. The lower two floors are partitioned into a variety of rooms that simulate the lower regions of the modeled containment. On the upper floor, rooms that simulate the steam generator enclosures and the pressurizer enclosure extend into the dome, which represents about two-thirds of the total volume of the containment.The GOTHIC model was defined with 30 control volumes using a mix of lumped parameter volumes and subdivided volumes that employ a three-dimensional mesh. Each volume included several thermal conductors to model the various structures. More than 100 flow paths were used to model the hydraulic connections.Comparison of predictions to data showed that enhanced grid resolution in the vicinity of the steam-helium release point served to limit dispersion of the steam-helium plume. The data comparisons also suggested that spray effectiveness was reduced by drop impact with the containment wall and by the high drop concentration. The data comparisons further suggested that the presence of condensation, sprays, splashing, and other wetting mechanisms should be considered to obtain a reasonable estimate of the effect of liquid films on the structure surfaces

Corporate Branding and Corporate Reputation

DEFF Research Database (Denmark)

Karmark, Esben

2013-01-01

Corporate branding has been seen as developing in “waves”. This chapter explores the links between corporate branding and corporate reputation as they emerge in the context of three waves of corporate branding. It highlights the way in which the two constructs have related to each other through o...... for corporate brands and corporate communication.......Corporate branding has been seen as developing in “waves”. This chapter explores the links between corporate branding and corporate reputation as they emerge in the context of three waves of corporate branding. It highlights the way in which the two constructs have related to each other through...... organizational culture and identity, and how, although characterized by parallel developments, new ideas and models from a “third” wave of corporate branding challenge prevailing assumptions of corporate reputation particularly in terms of the assumptions that reputations emerge from authentic and transparent...

[Ontario Hydro]. Corporate performance report, 1993

International Nuclear Information System (INIS)

1994-01-01

Summarizes Ontario Hydro's corporate performance for the year, with actual results being compared against planned values established in the approved corporate financial plan and work program budget. Also includes additional indicators that illustrate noteworthy trends in corporate performance. Corporate results are reported under the new organizational structure implemented in mid-1993, beginning with overall results in such areas as customer satisfaction, electricity sales, human resources, and environmental protection. This is followed by reports from the Electricity Group (supply, generation, transmission), the Energy Services and Environment Group (load saved and shifted, non-utility generation, retail distribution), and Ontario Hydro enterprises (Ontario Hydro Technologies, Ontario Hydro International). The appendix contains summary financial statements

Storage of Buffy-coat-derived platelets in additive solutions: in vitro effects on platelets prepared by the novel TACSI system and stored in plastic containers with different gas permeability.

Science.gov (United States)

Sandgren, P; Hild, M; Sjödin, A; Gulliksson, H

2010-11-01

The novel TACSI system is designed for automated preparation of platelets (PLTs) from pooled buffy coats (BCs). One TACSI device will handle 6 units at the same time. The aim of our in vitro study is to investigate the effects of using this automated equipment with subsequent storage in two different plastic containers and to compare these results with PLTs prepared by the OrbiSac system. Buffy-coat-derived PLTs (n=8) were prepared by using the TACSI system, including storage in polyvinyl chloride (PVC)-based plastic containers with di, n-decyl phthalate (DnDP) (TACSI R) and BTHC (TACSI T)-based plasticizers. As a reference, the OrbiSac System was used to prepare PLTs (n=8) with subsequent storage in a PVC plastic container with a citrate-based plasticizer (BTHC). In total, 16 TACSI and eight reference units, supplied by approximately 30% plasma and 70% SSP+, were analysed for various in vitro variables during the 7-day storage period. No significant difference in PLT counts, LDH, mean platelet volume (MPV) and adenosine triphosphate between the groups was detected. Glucose was lower (P6·8 (day 7) and swirling remained at the highest level (score=2) for all units throughout storage. Platelets prepared by the TACSI system with subsequent storage in two different PVC-based plastic containers were equivalent to reference PLTs with regard to in vitro characteristics during 7 days of storage. © 2010 The Author(s). Vox Sanguinis © 2010 International Society of Blood Transfusion.

Improving Public Health and Environment through Plastic Waste Management in Mumbai Metropolitan Region

OpenAIRE

Sanjay RODE

2015-01-01

The Mumbai Metropolitan Region is growing in terms of population, industry, educational and commercial units. The daily requirements of commodities and services by all units have increased fast. Plastic is used extensively for packing, protection and service of various commodities. The use of plastic is much higher by industry and households in region. In Brihan Mumbai Municipal Corporation, the density of population is higher. The concentration of small and large industries is more. Therefor...

BC-454 boron-loaded plastic scintillator

International Nuclear Information System (INIS)

Bellian, J.G.

1984-01-01

Prototype samples of plastic scintillators containing up to 10% by weight of natural boron have been produced. The maximum size scintillators made to date are 28 mm dia. x 100 mm long. Rods containing up to 2% boron are now made routinely and work is progressing on higher concentrations. The plastics are clear and emit the same blue fluorescence as other common plastic scintillators. It is expected that rods up to 3'' dia. containing 5% boron will be produced during the next few months. BC-454 is particularly useful in neutron research, materials studies, some types of neutron dosimetry, and monitoring of medium to high energy neutrons in the presence of other types radiation. It combines attractive features that enhance its usefulness to the physics community

UTILIZATION OF WASTE PLASTIC BOTTLES IN ASPHALT MIXTURE

Directory of Open Access Journals (Sweden)

TAHER BAGHAEE MOGHADDAM

2013-06-01

Full Text Available Nowadays, large amounts of waste materials are being produced in the world. One of the waste materials is plastic bottle. Generating disposable plastic bottles is becoming a major problem in many countries. Using waste plastic as a secondary material in construction projects would be a solution to overcome the crisis of producing large amount of waste plastics in one hand and improving the structure’s characteristics such as resistance against cracking on the other hand. This study aimed to investigate the effects of adding plastic bottles in road pavement. Marshall properties as well as specific gravity of asphalt mixture containing different percentages of plastic bottles were evaluated. Besides, Optimum Asphalt Content (OAC was calculated for each percentages of plastic bottles used in the mix. The stiffness and fatigue characteristics of mixture were assessed at OAC value. Results showed that the stability and flow values of asphalt mixture increased by adding waste crushed plastic bottle into the asphalt mixture. Further, it was shown that the bulk specific gravity and stiffness of mixtures increased by adding lower amount of plastic bottles; however, adding higher amounts of plastic resulted in lower specific gravity and mix stiffness. In addition, it was concluded that the mixtures containing waste plastic bottles have lower OAC values compared to the conventional mixture, and this may reduce the amount of asphalt binder can be used in road construction projects. Besides, the mixtures containing waste plastic showed significantly greater fatigue resistance than the conventional mixture.

Pyrolysis of polyethylene terephthalate containing real waste plastics using Ni loaded zeolite catalysts

Science.gov (United States)

Al-asadi, M.; Miskolczi, N.

2018-05-01

In this work the pyrolysis of polyethylene terephthalate (PET) containing real waste plastic was investigated using different Ni loaded catalysts: Ni/ZSM-5, Ni/y-zeolite, Ni/β-zeolite and Ni/natural zeolite (clinoptilolite). Raw materials were pyrolyzed in a horizontal tubular reactor between 600 and 900°C using 10% of catalysts. It was found, that both temperature increasing and catalysts presence can increase the gas yields, however owing to gasification reactions, the pyrolysis oil yield decreased with increasing temperature. Ni/y-zeolite catalyst had the most benefit in gas yield increasing at low temperature; however Ni/ZSM-5 showed advanced property in gas yield increasing at high temperature. Gases contained hydrogen, carbon oxides and hydrocarbons, which composition was significantly affected by catalysts. Ni loaded zeolites favoured to the formation of hydrogen and branched hydrocarbons; furthermore the concentrations of both CO and CO2 were also increased as function of elevated temperature. That phenomenon was attributed to the further decomposition of PET, especially to the side chain scission reactions. Owing to the Boudouard reaction, the ratio of CO2/CO can increased with temperature. Pyrolysis oils were the mixtures of n-saturated, n-unsaturated, branched, oxygen free aromatics and oxygenated hydrocarbons. Temperature increasing has a significant effect to the aromatization and isomerization reactions, while the catalysts can efficiently decreased the concentration of oxygen containing compounds.

Development of the SEA Corporation Powergrid{trademark} photovoltaic concentrator

Energy Technology Data Exchange (ETDEWEB)

Kaminar, N.; Curchod, D.; Daroczi, S.; Walpert, M.; Sahagian, J.; Pepper, J. [Photovoltaics International, LLC, Sunnyvale, CA (United States)

1998-03-01

This report covers the three phase effort to bring the SEA Corporation`s Powergrid{trademark} from the concept stage to pilot production. The three phases of this contract covered component development, prototype module development, and pilot line production. The Powergrid is a photovoltaic concentrator that generates direct current electricity directly from sunlight using a linear Fresnel lens. Analysis has shown that the Powergrid has the potential to be very low cost in volume production. Before the start of the project, only proof of concept demonstrations of the components had been completed. During the project, SEA Corporation developed a low cost extruded Fresnel lens, a low cost receiver assembly using one sun type cells, a low cost plastic module housing, a single axis tracking system and frame structure, and pilot production equipment and techniques. In addition, an 800 kW/yr pilot production rate was demonstrated and two 40 kW systems were manufactured and installed.

A Study of Transparent Plastics for use on Aircraft. Supplement

Science.gov (United States)

Axilrod, Benjamin M.; Kline, Gordon M.

1937-01-01

This supplement to a NACA study issued in May 1937 entitled "A Study of Transparent Plastics for Use on Aircraft", contains two tables. These tables contain data on bursting strengths of plastics, particularly at low temperatures. Table 1 contains the values reported in a table of the original memorandum, and additional values obtained at approximately 25 C, for three samples of Acrylate resin. The second table contains data obtained for the bursting strength when one surface of the plastic was cooled to approximately -35 C.

Standard practice for acoustic emission examination of pressurized containers made of fiberglass reinforced plastic with balsa wood cores

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals. 1.2 This practice is limited to cylindrical shape containers, 0.5 m [20 in.] to 3 m [120 in.] in diameter, of sandwich construction with balsa wood core and over 30 % glass (by weight) FRP skins. Reinforcing material may be mat, roving, cloth, unidirectional layers, or a combination thereof. There is no restriction with regard to fabrication technique or method of design. 1.3 This practice is limited to containers that are designed for less than 0.520 MPa [75.4 psi] (gage) above static pressure head due to contents. 1.4 This practice does not specify a time interval between examinations for re-qualification of a pressure container. 1.5 This practice is used to determine if a container is suitable for service or if follow-up NDT is needed before that...

Application of IAEA TECDOC 717 to the assessment of brittle fracture in transport containers with plastic flow shock absorbers

International Nuclear Information System (INIS)

Gray, I.L.S.; Sievwright, R.W.T.; Cardwell, S.; Donelan, P.

1995-01-01

UK Nirex is developing re-usable shielded transport containers (RSTCs) in a range of shielding thicknesses (from 70 mm to 285 mm) to transport immobilised intermediate level radioactive waste (ILW) to a deep repository. The RSTCs are being designed to meet the requirements of the IAEA Transport Regulations for Type B packages, including the requirement to maintain shielding and containment following a drop of 9 m onto an unyielding surface. The RSTCs are essentially monolithic in construction and the heaviest version weighs up to 65 tonnes when loaded with contents. They rely principally on plastic flow of the material of construction to absorb the high energies involved in impact events. Specific features of the designs, such as the solid metal corner shock absorbers and side ribs have been optimised for this purpose. Nirex has investigated the feasibility of manufacturing the RSTCs from ductile cast iron (DCI) or cast steel instead of from forgings, since this would bring advantages of reduced manufacturing time and costs. In this paper the methodology set out in IAEA-TECDOC-717 is applied to the Nirex RSTC, including the application of elastic plastic fracture mechanics methods. (author)

Hubungan Corporate Governance, Corporate Social Responsibilities dan Corporate Financial Performance Dalam Satu Continuum

Directory of Open Access Journals (Sweden)

Etty Murwaningsari

2009-01-01

Full Text Available This research aims to identify the influence of Good Corporate Governance, represented by institutional ownership and managerial ownership, on Corporate Social Responsibility and Corporate Financial Performance, and also to observe the possible influence of Corporate Social Responsibility on Corporate Financial Performance. This research examines 126 manufacturing companies which are listed in Indonesian Stock Exchange (ISX and have issued an audited financial statement for 2006. The statistical method used to test the hypothesis is Path Analysis. The result suggests that Good Corporate Governance influences both the disclosure of Corporate Social Responsibility and Corporate Financial Performance and that Corporate Social Responsibility significantly influences Corporate Financial Performance. The result also suggests that CEO Tenure, the controlling variable, holds a significant influence on the disclosure of Corporate Social Responsibility. Yet, there is no strong evidence to support the type of industries as an influencing factor of Corporate Social Responsibility. Furthermore, we found that the latter condition would also apply when we analyze the influence of Corporate Secretary and Nomination and Remuneration Committee on Corporate Financial Performance. Abstract in Bahasa Indonesia: Penelitian ini bertujuan untuk mengidentifikasi pengaruh antara struktur Coorporate Governance yang diproksikan sebagai kepemilikan institusional, kepemilikan manajerial terhadap corporate social responsibility dan corporate social responsibility terhadap corporate financial performance. Penelitian menggunakan data sekunder dari laporan tahunan 2006 perusahaan publik yang terdapat di Pusat Referensi Pasar Modal (PRPM Bursa Efek Indonesia (BEI. Sampel dalam penelitian ini sebanyak 126 perusahaan. Melalui pendekatan analisa jalur (path analysis menunjukkan Good Corporate Governance yaitu kepemilikan managerial dan institusional mempunyai pengaruh terhadap

Corporate Law and Corporate Governance

OpenAIRE

Roberta Romano

1998-01-01

We have seen a revival in interest in corporate law and corporate governance since the 1980s, as researchers applied the tools of the new institutional economics and modern corporate finance to analyze the new transactions emerging in the 1980s takeover wave. This article focuses on three mechanisms of corporate governance to illustrate the analytical usefulness of transaction cost economics for corporate law. They are the board of directors; relational investing, a form of block ownership in...

Modeling of the solution interaction properties of plastic materials used in pharmaceutical product container systems.

Science.gov (United States)

Jenke, Dennis; Couch, Tom; Gillum, Amy; Sadain, Salma

2009-01-01

Material/water equilibrium binding constants (Eb) were determined for 14 organic solutes and 17 plastic raw materials that could be used in pharmaceutical product container systems. Correlations between the measured binding constants and the organic solute's octanol/water and hexane/water partition coefficients were obtained. In general, while the materials examined exhibited a wide range of binding characteristics, the tested materials by and large fell within two broad classes: (1) those that were octanol-like in their binding characteristics, and (2) those that were hexane-like. Materials of the same class (e.g., polypropylenes) generally had binding models that were very similar. Rank ordering of the materials in terms of their magnitude of drug binding (least binding to most binding) was as follows: polypropylene < polyethylene < polyamide < styrene-ethylene-butylene-styrene < copolyester ether elastomer approximately equal to amine-terminated poly fatty acid amide polymer. The utilization of the developed models to estimate drug loss via sorption by the container is discussed.

Managing Corporate Reputation Through Corporate Branding

DEFF Research Database (Denmark)

Schultz, Majken; Hatch, Mary Jo; Adams, Nick

2012-01-01

This article, which concentrates on symbolic management by explaining the role of corporate branding in managing corporate reputation, using Novo Nordisk as a case study, presents three perspectives on corporate branding: the marketing perspective, the organisational perspective and the co...... is a way to influence corporate reputation. The Novo Nordisk management believes the data indicate that corporate branding influenced reputation more than the other way around. Formal brand management practices may work considerably better when they complement rather than try to control existing forces......-creation perspective. The three perspectives reviewed show the possibility of developing a multidisciplinary conceptualisation of corporate branding. They all offer insights important to managing organisations as corporate brands in a multi-stakeholder context and thus to the likelihood that corporate branding...

Development of a composite polyethylene--fiberglass-reinforced-plastic high-integrity container for disposal of low-level radioactive waste

International Nuclear Information System (INIS)

Lowenberg, H.; Shaw, M.D.

1989-01-01

This paper reports on a program to develop a high-integrity container (HIC) for handling, transportation, and disposal of low-level radioactive wastes. The HIC, made of a composite material, consists of an inner layer of polyethylene bonded to an outer casing of fiberglass-reinforced plastic. Preliminary handmade prototype units containing about 0.22 m 3 , called HIC-7, have been fabricated and exposed to some of the U.S. Nuclear Regulatory Commission (NRC) and state tests. The HICs withstood over twice the external pressure from maximum burial conditions and twice the Type A package internal pressure requirements. In addition, freedrops on compacted soil and an unyielding surface showed no deleterious effects

Recycling of plastic waste: Presence of phthalates in plastics from households and industry.

Science.gov (United States)

Pivnenko, K; Eriksen, M K; Martín-Fernández, J A; Eriksson, E; Astrup, T F

2016-08-01

Plastics recycling has the potential to substitute virgin plastics partially as a source of raw materials in plastic product manufacturing. Plastic as a material may contain a variety of chemicals, some potentially hazardous. Phthalates, for instance, are a group of chemicals produced in large volumes and are commonly used as plasticisers in plastics manufacturing. Potential impacts on human health require restricted use in selected applications and a need for the closer monitoring of potential sources of human exposure. Although the presence of phthalates in a variety of plastics has been recognised, the influence of plastic recycling on phthalate content has been hypothesised but not well documented. In the present work we analysed selected phthalates (DMP, DEP, DPP, DiBP, DBP, BBzP, DEHP, DCHP and DnOP) in samples of waste plastics as well as recycled and virgin plastics. DBP, DiBP and DEHP had the highest frequency of detection in the samples analysed, with 360μg/g, 460μg/g and 2700μg/g as the maximum measured concentrations, respectively. Among other, statistical analysis of the analytical results suggested that phthalates were potentially added in the later stages of plastic product manufacturing (labelling, gluing, etc.) and were not removed following recycling of household waste plastics. Furthermore, DEHP was identified as a potential indicator for phthalate contamination of plastics. Close monitoring of plastics intended for phthalates-sensitive applications is recommended if recycled plastics are to be used as raw material in production. Copyright © 2016 Elsevier Ltd. All rights reserved.

Size effects in crystal plasticity

DEFF Research Database (Denmark)

Borg, Ulrik

2007-01-01

Numerical analyses of plasticity size effects have been carried out for different problems using a developed strain gradient crystal plasticiy theory. The theory employs higher order stresses as work conjugates to slip gradients and uses higher order boundary conditions. Problems on localization...... of plastic flow in a single crystal, grain boundary effects in a bicrystal, and grain size effects in a polycrystal are studied. Single crystals containing micro-scale voids have also been analyzed at different loading conditions with focus on the stress and deformation fields around the voids, on void...... growth and interaction between neighboring voids, and on a comparison between the developed strain gradient crystal plasticity theory and a discrete dislocation plasticity theory. Furthermore, voids and rigid inclusions in isotropic materials have been studied using a strain gradient plasticity theory...

Corporate Characteristics, Political Embeddedness and Environmental Pollution by Large U.S. Corporations

Science.gov (United States)

Prechel, Harland; Zheng, Lu

2012-01-01

Organizational and environmental sociology contain surprisingly few studies of the corporation as one of the sources of environmental pollution. To fill this gap, we focus on the parent company as the unit of analysis and elaborate environmental theories that focus on the organizational and political-legal causes of pollution. Using a compiled…

Recycling of plastics

Energy Technology Data Exchange (ETDEWEB)

Kaminsky, W; Menzel, J; Sinn, H

1976-01-01

Considering the shortage of raw materials and environmental pollution, the recycling of plastic waste is a very important topic. Pilot plants for research in Funabashi Japan, Franklin (Ohio) U.S.A., and the R 80-process of Krauss Maffei, W. Germany, have demonstrated the possibility of reclaiming plastics from refuse. Old tires and waste from the plastic producing and manufacturing industries are readily available. The pyrolysis of plastic yields gaseous and liquid products, and the exploitation of this cracking reaction has been demonstrated by pilot plants in Japan and Great Britain. Further laboratory scale experiments are taking place in W. Germany. In continuous fluidized beds and in molten salts, polyethylene, polypropylene, polyvinylchloride, polystyrene and rubber are pyrolysed and better than 98 percent conversion is obtained. Up to 40 percent of the feed can be obtained as aromatic compounds, and a pilot plant is under construction. As a first step PVC-containing material can be almost quantitatively dehydrochlorinated.

Experimental investigation on the properties of concrete containing post-consumer plastic waste as coarse aggregate replacement

OpenAIRE

Zasiah TAFHEEM; Rakibul Islam RAKIB; MD. ESHARUHULLAH; S.M. REDUANUL ALAM; Md. MASHFIQUL ISLAM

2018-01-01

The consumption of various forms of plastic has been increased in recent days due to the boost in industrialization and other human activities. Most of the plastic wastes are abandoned and require large landfill area for storage. More importantly, the low biodegradability of plastic poses a serious threat to environment protection issue. Various methods have been followed for the disposal of plastic in an attempt to reduce the negative impact of the plastic on the environment. Recently, vario...

Corporate against corporate management

OpenAIRE

Runcev, Nikolce; Krstev, Boris; Golomeova, Mirjana

2010-01-01

In contemporary economic performance, corporate governance is considered an essential prerequisite in building a successful system for creating an attractive investment climate, which is characterized by competing companies oriented and efficient financial markets. Good corporate governance is based on principles of transparency, bias, efficiency, timeliness, completeness and accuracy of information at all levels of management. Companies with good corporate governance and afford easier acc...

27 CFR 555.180 - Prohibitions relating to unmarked plastic explosives.

Science.gov (United States)

2010-04-01

... unmarked plastic explosives. 555.180 Section 555.180 Alcohol, Tobacco Products, and Firearms BUREAU OF... Marking of Plastic Explosives § 555.180 Prohibitions relating to unmarked plastic explosives. (a) No person shall manufacture any plastic explosive that does not contain a detection agent. (b) No person...

Plastic, Fantastic? What We Make. Science and Technology Education in Philippine Society.

Science.gov (United States)

Philippines Univ., Quezon City. Inst. for Science and Mathematics Education Development.

This module provides information about plastics, focusing on the uses of plastic bags in particular. Topic areas considered include: (1) making plastic bags; (2) transparency of plastic bags; (3) plastic bags and food odors; (4) food containers (before and since plastics); and (5) disposing of plastic bags and other plastic products. The text is…

Plastic pollutants in water environment

Directory of Open Access Journals (Sweden)

Mrowiec Bożena

2017-12-01

Full Text Available Nowadays, wide applications of plastics result in plastic waste being present in the water environment in a wide variety of sizes. Plastic wastes are in water mainly as microplastics (the size range of 1 nm to < 5 mm. Microplastics have been recognized as an emerging threat, as well as ecotoxicological and ecological risk for water ecosystems. In this review are presented some of the physicochemical properties of plastic materials that determine their toxic effect on the aquatic environment. Wastewater treatment plants (WWTPs are mentioned as one of main sources of microplastics introduced into fresh water, and rivers are the pathways for the transportation of the pollutants to seas and oceans. But, effluents from tertiary wastewater treatment facilities can contain only minimally microplastic loads. The issue of discharge reduction of plastic pollutants into water environment needs activities in the scope of efficient wastewater treatment, waste disposal, recycling of plastic materials, education and public involvement.

Is the holy grail plastic? Radiation identification from plastic scintillators

International Nuclear Information System (INIS)

Butchins, L. J. C.; Gosling, J. M.; Hogbin, M. R. W.; Jones, D. C.; Lacey, R. J.; Stearn, J. G.

2009-01-01

Thousands of shipping containers containing Naturally Occurring Radioactive Materials (NORM) made from ceramics, stoneware and other natural products are transported worldwide on a daily basis. Some of these NORM loads are sufficiently radioactive to trigger alarms from plastic scintillator detectors which have limited ability to also identify the radionuclides present thus necessitating secondary inspection which increases the operational overhead. Previous studies have been carried out to ascertain if radionuclide discrimination using plastic scintillators is possible with a variety of approaches including deconvolution and computer learning. In this paper, a two stage algorithm is described. An example implementation of the algorithm is presented, applied to operational data, and has been installed in real time operation on a polyvinyl-toluene (PVT) detector. The approach requires the collection of a large library of spectra using examples of the detectors to be deployed. In this study, data from both actual freight loads passing through a port and predefined freight containing various radionuclides were collected. The library represents freight loads that may contain industrial, medical, nuclear, and NORM radionuclides. The radionuclides in the predefined freight were placed in various orientations and in various amounts of shielding to mimic many different scenarios. Preliminary results on an initial subset of data containing industrial and NORM sources show the number of mis-classifications to be less than 1% of the total test data. Good initial results were obtained even for low energy radionuclides such as 241 Am. Where discrimination is not possible, and principle components overlap, this region or 'cloud' of the n-dimensional plot can be put aside. Those spectra that fall in the 'cloud' can be regarded as suspect and in these cases, some secondary screening will still be necessary. It is predicted that the algorithm will enable recognition of NORM loads

A Plastic Menagerie

Science.gov (United States)

Hadley, Mary Jane

2010-01-01

Bobble heads had become quite popular, depicting all sorts of sports figures, animals, and even presidents. In this article, the author describes how her fourth graders made bobble head sculptures out of empty plastic drink bottles. (Contains 1 online resource.)

Mixed gas plasticization phenomena in asymmetric membranes

NARCIS (Netherlands)

Visser, Tymen

2006-01-01

This thesis describes the thorough investigation of mixed gas transport behavior of asymmetric membranes in the separation of feed streams containing plasticizing gases in order to gain more insights into the complicated behavior of plasticization. To successfully employ gas separation membranes in

40 CFR 156.140 - Identification of container types.

Science.gov (United States)

2010-07-01

....” (ii) “Once cleaned, some agricultural plastic pesticide containers can be taken to a container... example, this statement could be “Once cleaned, some agricultural plastic pesticide containers can be...) Pet collars or animal ear tags, such as cattle ear tags. (ix) One-time use semiochemical dispersion...

Hubungan Corporate Governance, Corporate Social Responsibilities dan Corporate Financial Performance Dalam Satu Continuum

OpenAIRE

Etty Murwaningsari

2009-01-01

This research aims to identify the influence of Good Corporate Governance, represented by institutional ownership and managerial ownership, on Corporate Social Responsibility and Corporate Financial Performance, and also to observe the possible influence of Corporate Social Responsibility on Corporate Financial Performance. This research examines 126 manufacturing companies which are listed in Indonesian Stock Exchange (ISX) and have issued an audited financial statement for 2006. The statist...

Corporate Responsibility

DEFF Research Database (Denmark)

Waddock, Sandra; Rasche, Andreas

2015-01-01

We define and discuss the concept of corporate responsibility. We suggest that corporate responsibility has some unique characteristics, which makes it different from earlier conceptions of corporate social responsibility. Our discussion further shows commonalities and differences between corporate...... responsibility and related concepts, such as corporate citizenship and business ethics. We also outline some ways in which corporations have implemented corporate responsibility in practice....

12 CFR 5.42 - Corporate title.

Science.gov (United States)

2010-01-01

... 18 U.S.C. 709, regarding false advertising and the misuse of names to indicate a Federal agency, and... the appropriate district office if it changes its corporate title. The notice must contain the old and...

Nonlinear analysis of pre-stressed concrete containment vessel (PCCV) using the damage plasticity model

Energy Technology Data Exchange (ETDEWEB)

Shokoohfar, Ahmad; Rahai, Alireza, E-mail: rahai@aut.ac.ir

2016-03-15

Highlights: • This paper describes nonlinear analyses of a 1:4 scale model of a (PCCV). • Coupled temp-disp. analysis and concrete damage plasticity are considered. • Temperature has limited effects on correct failure mode estimation. • Higher pre-stressing forces have limited effects on ultimate radial displacements. • Anchorage details of liner plates leads to prediction of correct failure mode. - Abstract: This paper describes the nonlinear analyses of a 1:4 scale model of a pre-stressed concrete containment vessel (PCCV). The analyses are performed under pressure and high temperature effects with considering anchorage details of liner plate. The temperature-time history of the model test is considered as an input boundary condition in the coupled temp-displacement analysis. The constitutive model developed by Chang and Mander (1994) is adopted in the model as the basis for the concrete stress–strain relation. To trace the crack pattern of the PCCV concrete faces, the concrete damage plasticity model is applied. This study includes the results of the thermal and mechanical behaviors of the PCCV subject to temperature loading and internal pressure at the same time. The test results are compared with the analysis results. The analysis results show that the temperature has little impact on the ultimate pressure capacity of the PCCV. To simulate the exact failure mode of the PCCV, the anchorage details of the liner plates around openings should be maintained in the analytical models. Also the failure mode of the PCCV structure hasn’t influenced by hoop tendons pre-stressing force variations.

25 CFR 226.8 - Corporation and corporate information.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Corporation and corporate information. 226.8 Section 226... RESERVATION LANDS FOR OIL AND GAS MINING Leasing Procedure, Rental and Royalty § 226.8 Corporation and corporate information. (a) If the applicant for a lease is a corporation, it shall file evidence of...

Biodegradability of Plastics: Challenges and Misconceptions.

Science.gov (United States)

Kubowicz, Stephan; Booth, Andy M

2017-11-07

Plastics are one of the most widely used materials and, in most cases, they are designed to have long life times. Thus, plastics contain a complex blend of stabilizers that prevent them from degrading too quickly. Unfortunately, many of the most advantageous properties of plastics such as their chemical, physical and biological inertness and durability present challenges when plastic is released into the environment. Common plastics such as polyethylene (PE), polypropylene (PP), polystyrene (PS), and polyethylene terephthalate (PET) are extremely persistent in the environment, where they undergo very slow fragmentation (projected to take centuries) into small particles through photo-, physical, and biological degradation processes 1 . The fragmentation of the material into increasingly smaller pieces is an unavoidable stage of the degradation process. Ultimately, plastic materials degrade to micron-sized particles (microplastics), which are persistent in the environment and present a potential source of harm for organisms.

Corporate governance and international business: Essays on multinational enterprises, ownership, finance and institutions

OpenAIRE

Rygh, Asmund

2016-01-01

This is an article based doctoral dissertation. Due to copyright matters, the attached pdf file only contains the mantel. This Thesis contributes to the literature on corporate governance in international business, with a focus on corporate ownership, corporate finance and institutions. It consists of five theoretical and empirical studies. Three studies focus on corporate ownership and consider, respectively, whether state ownership shields multinational enterprises (MNEs) from host-c...

Ingestion of plastic debris by Laysan albatrosses and wedge-tailed shearwaters in the Hawaiian Islands

Science.gov (United States)

Fry, D.M.; Fefer, S.I.; Sileo, L.

1987-01-01

Surveys of Laysan Albatross and Wedge-tailed Shearwaters on Midway and Oahu Island, Hawaii, identified a high proportion of birds with plastic in the upper gastrointestinal tract, representing hazards to the health of adult birds and their chicks. Fifty Laysan Albatross chicks were examined for plastic items lodged within the upper digestive tract. Forty-five (90%) contained plastic, including 3 chicks having proventricular impactions or ulcerative lesions. Plastic items in 21 live albatross chicks weighed a mean of 35.7 g chicka??1 (range 1a??175 g). Four dead birds contained 14a??175 g (mean 76.7 g). Two of four adult albatross examined contained plastic in the gut. Laysan albatross chicks have the highest reported incidence and amount of ingested plastic of any seabird species. Twelve of 20 adult Wedge-tailed Shearwaters (60%) contained plastic particles 2a??4 mm in diameter. Impaction did not appear to be a significant hazard for adult shearwaters. Shearwater chicks were not examined. Chemical toxicity of plastic polymers, plasticizers and antioxidant additives is low, although many pigments are toxic and plastics may serve as vehicles for the adsorption of organochlorine pollutants from sea water, and the toxicity of plastics is unlikely to pose significant hazard compared to obstruction and impaction of the gut.

Study of the performances of acoustic emission testing for glass fibre reinforced plastic pipes containing defects

International Nuclear Information System (INIS)

Villard, D.; Vidal, M.C.

1995-08-01

Glass fibre reinforced plastic pipes are more and more often used, in nuclear power plants, for building or replacement of water pipings classified 'nuclear safety'. Tests have been performed to evaluate the performances of acoustic emission testing for in service inspection of these components. The tests were focused on glass fibre reinforced polyester and vinyl-ester pipes, in as received conditions or containing impacts, and intentionally introduced defects. They have been carried out by CETIM, following the ASTM Standard E 1118 (code CARP), to a maximum pressure lever of 25 Bar The results show that the CARP procedure can be used for detection of defects and evaluation of their noxiousness towards internal pressure: most of the tubes containing low energy impacts could not be distinguished from tubes without defect; on the other hand the important noxiousness of lacks of impregnation of roving layer appeared clearly. Complementary tests have been performed on some tubes at a more important pressure lever, for which the damage of the tubes in enough to deteriorate there elastic properties. The results showed that CARP procedure give valuable informations on damage level. It would be interesting to evaluate acoustic emission on tubes containing realistic in-service degradations. (author). 11 refs., 15 figs., 6 tabs., 2 appends

Plastic debris in great skua (Stercorarius skua) pellets corresponds to seabird prey species.

Science.gov (United States)

Hammer, S; Nager, R G; Johnson, P C D; Furness, R W; Provencher, J F

2016-02-15

Plastic is a common item in marine environments. Studies assessing seabird ingestion of plastics have focused on species that ingest plastics mistaken for prey items. Few studies have examined a scavenger and predatory species that are likely to ingest plastics indirectly through their prey items, such as the great skua (Stercorarius skua). We examined 1034 regurgitated pellets from a great skua colony in the Faroe Islands for plastics and found approximately 6% contained plastics. Pellets containing remains of Northern fulmars (Fulmarus glacialis) had the highest prevalence of plastic. Our findings support previous work showing that Northern fulmars have higher loads of plastics than other sympatric species. This study demonstrates that marine plastic debris is transferred from surface feeding seabird species to predatory great skuas. Examination of plastic ingestion in species that do not ingest plastics directly can provide insights into how plastic particles transfer vertically within the food web. Copyright © 2015 Elsevier Ltd. All rights reserved.

AUDIT REPORTING AND CORPORATE GOVERNANCE: LINKS AND IMPLICATIONS

Directory of Open Access Journals (Sweden)

George Silviu CORDOȘ

2014-04-01

Full Text Available Financial scandals of the last decade have had a negative effect upon the trust and perception of investors regarding auditor responsibility and their part in fraud and error detection. As a result of legal conditions and regulations, audit firms in some jurisdictions have recently started to compile transparency reports, which contain information regarding corporate governance compliance of audit firms. This study aims to investigate if corporate governance has a significant effect on audit reporting and audit quality. Thus, our starting point is the definition of corporate governance, with an emphasis on the transparency principle for efficient corporate governance. We aim to analyse how this principle influences the quality level of the audit report, through a qualitative study. Keeping in mind that corporate governance in audit firms is considered to have a noteworthy effect on audit quality, we expect to find that regulatory bodies expect more transparency from these firms, therefore increasing competitiveness among audit firms concerning audit quality.

Plasticity of pressure-sensitive materials

CERN Document Server

Ochsner, Andreas

2014-01-01

Classical plasticity theory of metals is independent of the hydrostatic pressure. However, if the metal contains voids or pores or if the structure is composed of cells, this classical assumption is no more valid and the influence of the hydrostatic pressure must be incorporated in the constitutive description. Looking at the microlevel, metal plasticity is connected with the uniform planes of atoms organized with long-range order. Planes may slip past each other along their close-packed directions. The result is a permanent change of shape within the crystal and plastic deformation. The presence of dislocations increases the likelihood of planes slipping. Nowadays, the theory of pressure sensitive plasticity is successfully applied to many other important classes of materials (polymers, concrete, bones etc.) even if the phenomena on the micro-level are different to classical plasticity of metals. The theoretical background of this phenomenological approach based on observations on the macro-level is describe...

Strain gradient crystal plasticity analysis of a single crystal containing a cylindrical void

DEFF Research Database (Denmark)

Borg, Ulrik; Kysar, J.W.

2007-01-01

to one another. Finite element simulations are performed using a strain gradient crystal plasticity formulation with an intrinsic length scale parameter in a non-local strain gradient constitutive framework. For a vanishing length scale parameter the non-local formulation reduces to a local crystal...... plasticity formulation. The stress and deformation fields obtained with a local non-hardening constitutive formulation are compared to those obtained from a local hardening formulation and to those from a non-local formulation. Compared to the case of the non-hardening local constitutive formulation......, it is shown that a local theory with hardening has only minor effects on the deformation field around the void, whereas a significant difference is obtained with the non-local constitutive relation. Finally, it is shown that the applied stress state required to activate plastic deformation at the void is up...

The language of corporate annual reports

DEFF Research Database (Denmark)

van Leeuwen, Theo

2013-01-01

Corporate reports contain four distinct discourses: accounting ,finance, public relations and legal. Each recontextualizes the company's activities in distinct ways which select what actions will be represented, transform actions through the way they are worded, and add motives to actions...

Thermoelastic/plastic analysis of waste-container sleeve: IV. Air gap influence on hole closure. Technical memorandum report (RSI-0019)

International Nuclear Information System (INIS)

Pariseau, W.G.

1975-01-01

A thermoelastic/plastic finite element analysis of the influence of an air-gap on hole closure about a waste-container/sleeve assembly emplaced in a typical repository room (SALT/4T Model) indicates that hole closure would be of the order of hundredths of an inch. Acceptable air-gap width is thus governed by the hole size required for emplacement efficiency. A refined mesh analysis and laboratory testing is suggested in order to further explore the possibility of eliminating the engineering necessity of the sleeve

Plastic pollution in the marine environment. (Latest citations from Oceanic Abstracts). Published Search

International Nuclear Information System (INIS)

1993-02-01

The bibliography contains citations concerning the adverse effects of synthetic polymers on oceans and beaches. The citations examine the impact of discarded plastics upon fish, seabirds, and other aquatic animals. The sources of plastic litter and the efforts of coastal communities to manage plastics pollution are referenced. International agreements designed to protect the marine environment by banning ocean dumping of plastics are discussed. (Contains a minimum of 145 citations and includes a subject term index and title list.)

AUDIT REPORTING AND CORPORATE GOVERNANCE: LINKS AND IMPLICATIONS

OpenAIRE

George Silviu CORDOȘ; Melinda Times FÜLÖP

2014-01-01

Financial scandals of the last decade have had a negative effect upon the trust and perception of investors regarding auditor responsibility and their part in fraud and error detection. As a result of legal conditions and regulations, audit firms in some jurisdictions have recently started to compile transparency reports, which contain information regarding corporate governance compliance of audit firms. This study aims to investigate if corporate governance has a significant effect on audit ...

Transparent plastic scintillators for neutron detection based on lithium salicylate

International Nuclear Information System (INIS)

Mabe, Andrew N.; Glenn, Andrew M.; Carman, M. Leslie; Zaitseva, Natalia P.; Payne, Stephen A.

2016-01-01

Transparent plastic scintillators with pulse shape discrimination containing "6Li salicylate have been synthesized by bulk polymerization with a maximum "6Li loading of 0.40 wt%. Photoluminescence and scintillation responses to gamma-rays and neutrons are reported herein. Plastics containing "6Li salicylate exhibit higher light yields and permit a higher loading of "6Li as compared to previously reported plastics based on lithium 3-phenylsalicylate. However, pulse shape discrimination performance is reduced in lithium salicylate plastics due to the requirement of adding more nonaromatic monomers to the polymer matrix as compared to those based on lithium 3-phenylsalicylate. Reduction in light yield and pulse shape discrimination performance in lithium-loaded plastics as compared to pulse shape discrimination plastics without lithium is interpreted in terms of energy transfer interference by the aromatic lithium salts. - Highlights: • Plastic scintillator with 0.4% "6Li loading is reported using lithium salicylate. • Influence of lithium salts on the scintillation mechanism is explored. • New lithium-loaded scintillator provides improved light yield and reduced cost.

Plastic condoms.

Science.gov (United States)

1968-01-01

Only simple equipment, simple technology and low initial capital investment are needed in their manufacture. The condoms can be made by people who were previously unskilled or only semi-skilled workers. Plastic condoms differ from those made of latex rubber in that the nature of the plastic film allows unlimited shelf-life. Also, the plastic has a higher degree of lubricity than latex rubber; if there is a demand for extra lubrication in a particular market, this can be provided. Because the plastic is inert, these condoms need not be packaged in hermetically sealed containers. All these attributes make it possible to put these condoms on the distributors' shelves in developing countries competitively with rubber condoms. The shape of the plastic condom is based on that of the lamb caecum, which has long been used as luxury-type condom. The plastic condom is made from plastic film (ethylene ethyl acrilate) of 0.001 inch (0.0254 mm.) thickness. In addition, a rubber ring is provided and sealed into the base of the condom for retention during coitus. The advantage of the plastic condom design and the equipment on which it is made is that production can be carried out either in labour-intensive economy or with varying degrees of mechanization and automation. The uniform, finished condom if made using previously untrained workers. Training of workers can be done in a matter of hours on the two machines which are needed to produce and test the condoms. The plastic film is provided on a double wound roll, and condom blanks are prepared by means of a heat-sealing die on the stamping machine. The rubber rings are united to the condom blanks on an assembly machine, which consists of a mandrel and heat-sealing equipment to seal the rubber ring to the base of the condom. Built into the assembly machine is a simple air-testing apparatus that can detect the smallest pinhole flaw in a condom. The manufacturing process is completed by unravelling the condom from the assembly

NOVA Corporation of Alberta annual report, 1992

International Nuclear Information System (INIS)

1993-01-01

Nova Corporation and its related businesses are involved in natural gas production, gas pipelines, consulting services, and upgrading of natural gas into chemicals and plastics. Nova owns Alberta Gas Transmission Division, the primary gas transportation system in Alberta, with 11,400 miles of pipeline and total deliveries in 1992 of 3.4 trillion ft 3 . Nova also owns 50% of Foothills Pipe Lines Ltd., one of Canada's largest carriers of exported gas, and 50% of TQM Pipeline Partnership, which transports natural gas in Quebec. Nova conducts its chemicals business through Novacor Chemicals Ltd., which has plants in Alberta, Ontario, Quebec, and the USA. Novacor's major petrochemicals are methanol, ethylene, propylene, and styrene and its major plastics are polystyrene, polypropylene, and polyethylene. Nova's gas-producing branch Novalta Resources produced 26 billion ft 3 of natural gas in 1992 and has proven reserves of 334 billion ft 3 . Nova's net income in 1992 was $164 million, compared to only $46 million in 1991. The company's operations, along with management discussion and analysis, are presented for 1992 and financial statements are included. 20 figs., 43 tabs

Plastic for indicating a radiation dose

International Nuclear Information System (INIS)

Hori, Y.; Yoshikawa, N.; Ohmori, S.

1975-01-01

A plastic film suitable for indicating radiation dose contains a chlorine polymer, at least one acid sensitive coloring agent and a plasticizer. The film undergoes a distinct change of color in response to a given radiation dose, the degree of change proportional to the total change. These films may be stored for a long period without loss of sensitivity, and have good color stability after irradiation. (auth)

Treatment of contaminated waste plastics material

International Nuclear Information System (INIS)

Sims, J.; Hitchcock, J.W.

1984-01-01

Radioactive contaminated plastics material is treated by reducing it to uniform-sized debris and extruding it from a heated extruder into a sealed container in monolithic block form or as an in-fill matrix for other contaminated waste articles to create a substantially void-free sealed mass for disposal. Density adjusting fillers may be included. Extrusion may alternatively take place into a clean sealable plastics tube. (author)

Properties of flat-pressed wood plastic composites containing fire retardants

Science.gov (United States)

Nadir Ayrilmis; Jan. T. Benthien; Heiko Thoemen; Robert H. White

2011-01-01

This study investigated physical, mechanical, and fire properties of the flat-pressed wood plastic composites (WPCs) incorporated with various fire retardants (FRs) [5 or 15% by weight (wt)] at 50 wt % of the wood flour (WF). The WPC panels were made from dry-blended WF, polypropylene (PP) with maleic anhydride grafted PP (2 wt %), and FR powder formulations using a...

Modulation of synaptic plasticity by stress hormone associates with plastic alteration of synaptic NMDA receptor in the adult hippocampus.

Directory of Open Access Journals (Sweden)

Yiu Chung Tse

Full Text Available Stress exerts a profound impact on learning and memory, in part, through the actions of adrenal corticosterone (CORT on synaptic plasticity, a cellular model of learning and memory. Increasing findings suggest that CORT exerts its impact on synaptic plasticity by altering the functional properties of glutamate receptors, which include changes in the motility and function of α-amino-3-hydroxy-5-methylisoxazole-4-propionic acid subtype of glutamate receptor (AMPAR that are responsible for the expression of synaptic plasticity. Here we provide evidence that CORT could also regulate synaptic plasticity by modulating the function of synaptic N-methyl-D-aspartate receptors (NMDARs, which mediate the induction of synaptic plasticity. We found that stress level CORT applied to adult rat hippocampal slices potentiated evoked NMDAR-mediated synaptic responses within 30 min. Surprisingly, following this fast-onset change, we observed a slow-onset (>1 hour after termination of CORT exposure increase in synaptic expression of GluN2A-containing NMDARs. To investigate the consequences of the distinct fast- and slow-onset modulation of NMDARs for synaptic plasticity, we examined the formation of long-term potentiation (LTP and long-term depression (LTD within relevant time windows. Paralleling the increased NMDAR function, both LTP and LTD were facilitated during CORT treatment. However, 1-2 hours after CORT treatment when synaptic expression of GluN2A-containing NMDARs is increased, bidirectional plasticity was no longer facilitated. Our findings reveal the remarkable plasticity of NMDARs in the adult hippocampus in response to CORT. CORT-mediated slow-onset increase in GluN2A in hippocampal synapses could be a homeostatic mechanism to normalize synaptic plasticity following fast-onset stress-induced facilitation.

The Relationship of Corporate Governance, Corporate Social Responsibilities and Corporate Financial Performance in One Continuum

OpenAIRE

Murwaningsari, Etty

2010-01-01

This study aims to identify the impact of Good Corporate Governance, represented by institutional ownership and managerial ownership, on Corporate Social Responsibility and Corporate Financial Performance.It examines 126 manufacturing companies listed at the Indonesian Stock Exchange (IDX) and have issued audited financial statements for 2006. The statistical method used to test the hypothesis is Path Analysis. The main results suggest that Good Corporate Governance has effects on both Corpor...

Compliance and corporate anti-money laundering regulation

Directory of Open Access Journals (Sweden)

Pietro Pavone

2018-04-01

Full Text Available This paper, having traced the evolution of anti-money laundering legislation, defines and frames money laundering and terrorism financing risk inside corporate dynamics. Principles that must inspire corporate actions on the construction of an adequate managing structure to contain risks are set out, considering the fact that there is no risk that this does not have an economical content. This is even truer in the presented case, given that the Italian legislation to counter money laundering is focused on the innovative and modern risk-based approach, which has to guide the organization and functioning of corporations. Possible configuration of corporate anti-money laundering supervisions is therefore analyzed, with the aim of underlining the present connection between anti-money laundering legislation and rules referring to the government and to the internal control system. The present study originates from the interpretation of the new Italian anti-money laundering law. In particular, the first consideration that derives is that the new law does not impose precise obligations in terms of corporate anti-money laundering structure, but a large area of autonomy is left to the will of each company.

Plastic Trash goes Biohybrid"-Rapid and Selective Functionalization of Inert Plastic Surfaces with Biomolecules

DEFF Research Database (Denmark)

Schiller, Stefan M; Kambhampati, Dev; Stengel, Gudrun

2010-01-01

The covalent functionalization of "inert" polymers such as polypropylene with biomolecules for biocompatible or biosensor surfaces is challenging. Here we present a powerful approach to covalently modify "inert" macromolecular surfaces with biomacromolecules reusing old plastic material. A special...... emphasis was placed on easily accessible materials and a process which is easy, fast, efficient, cheap, and reliable. "Plastic trash" (lids from Eppendorf® pipet tip containers) was used as a polymer substrate to demonstrate the use/reuse of commercial packing material to covalently modify this material...

Chemoreception drives plastic consumption in a hard coral.

Science.gov (United States)

Allen, Austin S; Seymour, Alexander C; Rittschof, Daniel

2017-11-15

The drivers behind microplastic (up to 5mm in diameter) consumption by animals are uncertain and impacts on foundational species are poorly understood. We investigated consumption of weathered, unfouled, biofouled, pre-production and microbe-free National Institute of Standards plastic by a scleractinian coral that relies on chemosensory cues for feeding. Experiment one found that corals ingested many plastic types while mostly ignoring organic-free sand, suggesting that plastic contains phagostimulents. Experiment two found that corals ingested more plastic that wasn't covered in a microbial biofilm than plastics that were biofilmed. Additionally, corals retained ~8% of ingested plastic for 24h or more and retained particles appeared stuck in corals, with consequences for energetics, pollutant toxicity and trophic transfer. The potential for chemoreception to drive plastic consumption in marine taxa has implications for conservation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sorption of hydrophobic organic compounds to plastics in marine environments: Equilibrium

NARCIS (Netherlands)

Endo, S.; Koelmans, A.A.

2016-01-01

Marine plastics have shown to contain various environmental chemicals. For evaluating the potential of plastics to influence regional and global dynamics of these chemicals and to serve as a vector to marine biota, understanding of sorption and desorption of chemicals by plastics is important. In

Frequency dependent changes in NMDAR-dependent synaptic plasticity

Directory of Open Access Journals (Sweden)

Arvind eKumar

2011-09-01

Full Text Available The NMDAR-dependent synaptic plasticity is thought to mediate several forms of learning, and can be induced by spike trains containing a small number of spikes occurring with varying rates and timing, as well as with oscillations. We computed the influence of these variables on the plasticity induced at a single NMDAR containing synapse using a reduced model that was analytically tractable, and these findings were confirmed using detailed, multi-compartment model. In addition to explaining diverse experimental results about the rate and timing dependence of synaptic plasticity, the model made several novel and testable predictions. We found that there was a preferred frequency for inducing long-term potentiation (LTP such that higher frequency stimuli induced lesser LTP, decreasing as 1/f when the number of spikes in the stimulus was kept fixed. Among other things, the preferred frequency for inducing LTP varied as a function of the distance of the synapse from the soma. In fact, same stimulation frequencies could induce LTP or LTD depending on the dendritic location of the synapse. Next, we found that rhythmic stimuli induced greater plasticity then irregular stimuli. Furthermore, brief bursts of spikes significantly expanded the timing dependence of plasticity. Finally, we found that in the ~5-15Hz frequency range both rate- and timing-dependent plasticity mechanisms work synergistically to render the synaptic plasticity most sensitive to spike-timing. These findings provide computational evidence that oscillations can have a profound influence on the plasticity of an NMDAR-dependent synapse, and show a novel role for the dendritic morphology in this process.

Micro-structural evolution in plastically deformed crystalline materials

DEFF Research Database (Denmark)

Nellemann, Christopher

predictions for the two models to be obtained. Application of the two models to the pure shear boundary value problem is used to characterize plastic behavior, which also allows for the identification of inherent properties through closed form expressions. Single crystal Monazite containing a void is studied......Two rate-independent strain gradient crystal plasticity models are developed and applied in numerical studies designed to identify the properties inherent to model predictions of plastic deformation. The two models incorporate gradients of slip into the framework of conventional crystal plasticity...... in order to model size-dependent plasticity effects. This gradient dependence is achieved by relating a slip measure which combines both slip and their gradients to a shear hardening curve, as commonly done in conventional plasticity theories. Finite element codes are implemented which allow for numerical...

Corporate Brand Trust as a Mediator in the Relationship between Consumer Perception of CSR, Corporate Hypocrisy, and Corporate Reputation

Directory of Open Access Journals (Sweden)

Hanna Kim

2015-03-01

Full Text Available The aim of this research is to investigate the relationship between consumer perception of Corporate Social Responsibility (CSR, corporate brand trust, corporate hypocrisy, and corporate reputation. Based on the one-to-one interview method using a structured questionnaire of 560 consumers in South Korea, the proposed model was estimated by structural equation modeling analysis. The model suggests that consumer perception of CSR influences consumer attitudes toward a corporation (i.e., perceived corporate hypocrisy and corporate reputation by developing corporate brand trust. This in turn further enhances corporate reputation while decreasing corporate hypocrisy. The findings of our study demonstrate that consumer perception of CSR is an antecedent to corporate brand trust, which fully mediates the relationship between consumer perception of CSR and corporate reputation. In addition, corporate brand trust has the role of partial mediator in the relationship between consumer perception of CSR and corporate hypocrisy. These results imply that to better understand the relationship between consumer perception of CSR and consumer attitudes toward a corporation, it is necessary to consider corporate brand trust as an important mediating variable. The theoretical and practical implications of this study are discussed, together with its limitations and potential for future research.

Corporate finance

OpenAIRE

P. Quiry; Y. Le Fur; A. Salvi; M. Dallocchio; P. Vernimmen

2011-01-01

Corporate Finance: Theory and Practice, 3rd Edition, the website www.vernimmen.com and the Vernimmen.com newsletter are all written and created by an author team who are both investment bankers/corporate financiers and academics. This book covers the theory and practice of Corporate Finance from a truly European perspective. It shows how to use financial theory to solve practical problems and is written for students of corporate finance and financial analysis and practising corporate financie...

Corporate Social Responsibility of Multinational Oil Corporations to ...

African Journals Online (AJOL)

Corporate Social Responsibility of Multinational Oil Corporations to Host ... Exxon Mobil and Elf oil Nigeria Limited within their corporate-community relations strategy in the ... The paper concludes by exploring the implications for partnerships' ...

Fate in humans of the plasticizer, DI (2-ethylhexyl) phthalate, arising from transfusion of platelets stored in vinyl plastic bags. [plasticizer migration into human blood from vinyl plastic bags during transfusion

Science.gov (United States)

Rubin, R. J.; Schiffer, C. A.

1975-01-01

Platelet concentrates were shown to contain 18-38 mg/100 ml of a phthalate plasticizer (DEHP) which arose by migration from the vinyl plastic packs in which the plateletes were prepared and stored. Transfusion of these platelets into 6 adult patients with leukemia resulted in peak blood plasma levels of DEHP ranging from 0.34 - 0.83 mg/100 ml. The blood levels fell mono-exponentially with a mean rate of 2.83 percent per minute and a half-life of 28.0 minutes. Urine was assayed by a method that would measure unchanged DEHP as well as all phthalic acid-containing metabolities. In two patients, at most 60 and 90% of the infused dose, respectively, was excreted in the urine collected for 24 hours post-transfusion. These estimates, however, could be high due to the simultaneous excretion of DEHP remaining from previous transfusions or arising from uncontrolled environmental exposures.

How Corporate Governance Affects Strategy of Corporations : - Lessons from Enron Corporation -

OpenAIRE

Ahmed, Hameed; Najam, Ali

2006-01-01

Corporate governance is a subject of academic and professional debate. It has and it will continue to be a topic under scrutiny for subsequent deliberations since there are many different research dimensions and contexts associated with it. However, it has been observed that the linkage between corporate governance and strategy of a corporation remains as an untapped area with considerable avenues of research. This paper tends to explore this linkage, using Enron scandal as backdrop. In the a...

Review of the partitioning of chemicals into different plastics: Consequences for the risk assessment of marine plastic debris

International Nuclear Information System (INIS)

O'Connor, Isabel A.; Golsteijn, Laura; Hendriks, A. Jan

2016-01-01

Marine plastic debris are found worldwide in oceans and coastal areas. They degrade only slowly and contain chemicals added during manufacture or absorbed from the seawater. Therefore, they can pose a long-lasting contaminant source and potentially transfer chemicals to marine organisms when ingested. In order to assess their risk, the contaminant concentration in the plastics needs to be estimated and differences understood. We collected from literature plastic water partition coefficients of various organic chemicals for seven plastic types: polydimethylsiloxane (PDMS), high-density, low-density and ultra-high molecular weight polyethylene (LDPE, HDPE, UHMWPE), polystyrene (PS), polypropylene (PP), and polyvinyl chloride (PVC). Most data was available for PDMS (1060) and LDPE (220), but much less for the remaining plastics (73). Where possible, regression models were developed and the partitioning was compared between the different plastic types. The partitioning of chemicals follows the order of LDPE ≈ HDPE ≥ PP > PVC ≈ PS. Data describing the impact of weathering are urgently needed. - Highlights: • Comparison of organic chemicals partitioning into seven plastic types • Linear correlation between plastic-water partition coefficient K pw and K ow • More data is needed for polypropylene, polystyrene and polyvinyl chloride. • In all plastic types, most K pw were similar to/smaller than the corresponding K ow .

Plastic

International Nuclear Information System (INIS)

Jeong Gi Hyeon

1987-04-01

This book deals with plastic, which includes introduction for plastic, chemistry of high polymers, polymerization, speciality and structure of a high molecule property of plastic, molding, thermosetting plastic, such as polyethylene, polyether, polyamide and polyvinyl acetyl, thermal plastic like phenolic resins, xylene resins, melamine resin, epoxy resin, alkyd resin and poly urethan resin, new plastic like ionomer and PPS resin, synthetic laminated tape and synthetic wood, mixed materials in plastic, reprocessing of waste plastic, polymer blend, test method for plastic materials and auxiliary materials of plastic.

Corporate identity as a factor of corporate security

OpenAIRE

Perelygina, Elena

2011-01-01

Forming-up of the corporate identity is based on cognitive, affective and conative elements of corporate culture. The group as an entity choosing goals and values ensures a certain response to standards and values of corporate culture within the parameters of its social responsibility. Corporate security as security of community and cooperation acts as a form of organizational and ethical approach to developing socially responsible attitude of government and business.

Degradation of oxo-biodegradable plastic by Pleurotus ostreatus.

Science.gov (United States)

da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Nunes, Mateus Dias; da Silva, Marliane de Cássia Soares; Kasuya, Maria Catarina Megumi

2013-01-01

Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV) or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D2W) plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate.

Degradation of oxo-biodegradable plastic by Pleurotus ostreatus.

Directory of Open Access Journals (Sweden)

José Maria Rodrigues da Luz

Full Text Available Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D2W plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate.

Degradation of Oxo-Biodegradable Plastic by Pleurotus ostreatus

Science.gov (United States)

da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Nunes, Mateus Dias; da Silva, Marliane de Cássia Soares; Kasuya, Maria Catarina Megumi

2013-01-01

Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV) or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D2W) plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate. PMID:23967057

Influence of Shrinkage-Reducing Admixtures on the Development of Plastic Shrinkage Cracks

DEFF Research Database (Denmark)

Lura, Pietro; Pease, Bradley Justin; Mazzotta, Guy

2007-01-01

The term plastic shrinkage cracking is generally used to describe cracks that form between the time when concrete is placed and the time when concrete sets. This paper discusses how the evaporation of water causes concave menisci to form on the surface of fresh concrete. These menisci cause both...... settlement of the concrete and tensile stress development in the surface of the concrete, which increase the potential for development of plastic shrinkage cracks. Specifically, this paper studies the development of plastic shrinkage cracks in mortars containing a commercially available shrinkage-reducing...... admixture (SRA). Mortars containing SRA show fewer and narrower plastic shrinkage cracks than plain mortars when exposed to the same environmental conditions. It is proposed that the lower surface tension of the pore fluid in the mortars containing SRA results in less evaporation, reduced settlement...

Corporate Identity as a Factor of Corporate Security

Directory of Open Access Journals (Sweden)

Elena B. Perelygina

2011-01-01

Full Text Available Forming-upof the corporate identity is based on cognitive, affective and conative elements of corporate culture. The group as an entity choosing goals and values ensures a certain response to standards and values of corporate culture within the parameters of its social responsibility. Corporate security as security of community and cooperation acts as a form of organizational and ethical approach to developing socially responsible attitude of government and business.

GREEN PLASTIC: A NEW PLASTIC FOR PACKAGING

OpenAIRE

Mr. Pankaj Kumar*, Sonia

2016-01-01

This paper gives a brief idea about a new type of plastic called as bio-plastic or green plastic. Plastic is used as a packaging material for various products, but this plastic is made up of non renewable raw materials. There are various disadvantages of using conventional plastic like littering, CO2 production, non-degradable in nature etc. To overcome these problems a new type of plastic is discovered called bio-plastic or green plastic. Bio-plastic is made from renewable resources and also...

Photodegradable plastics useful for global environment conservation. Chikyu ni yasashii hikaribunkaisei plastic

Energy Technology Data Exchange (ETDEWEB)

Iwasa, T. (Harima Kasei K.K., Osaka (Japan))

1991-10-11

Photodegradable plastics and their additives were explained.Two methods are used to manufacture photodegradable plastics.The first method is made by using a copolymer and a monomer containing a functional group and the second method is made by adding a photodegradable agent to an undecomposable plastics.The copolymer based on ethylene and carbon monoxide is included in the first type. The copolymer based on the vinyl ketone to which the carboxyl group is introduced, and ethylene or styrene is also included in this type. A metal dithiocarbamate is included in the second additive type, for which several methods to improve weak points of the pigment compounding system have been proposed later. Benzophenone derivatives, transition metal salts of organic acids and anatase type titanium dioxide are also included in the second type. Any additives are usually supplied as the masterbatch. The performance evaluation and degrading mechanism of ferric tri(2-(methylbenzoyl)benzoate) of adittion type additives were explained. 8 refs., 3 figs., 1 tab.

Rand Corporation

Science.gov (United States)

... Jobs at RAND Media Resources Congressional Resources Doing Business with RAND Supporting RAND Educational Opportunities Alumni Association Follow RAND Corporation on Facebook RAND Corporation on Twitter RAND Corporation on LinkedIn ...

History of plastic surgery: Art, philosophy, and rhinoplasty.

Science.gov (United States)

Macionis, Valdas

2018-03-23

The 200th anniversary of K. F. Graefe's "Rhinoplasty," E. Zeis' naming of the specialty of plastic surgery in 1838, and the continuing discussion on what is plastic surgery have prompted this historical-conceptual review with a semantic insight into the meaning of the word "plastic." A literature search has revealed that this term contains dual aspects: artistic and philosophical. The progressive development of these two connotations can be traced from their origin in the ceramics and the myths of ancient Greeks to their metamorphoses in fine arts, science, and philosophy of plasticity of the modern day. Although the names of plastic procedures and the title of the specialty carry both the artistic and philosophical features, the philosophical notion is less evident. This article underlines the importance of etymology in the interpretation of the concept of plastic surgery. Copyright © 2018 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Corporate Sustainable Development Assessment Base on the Corporate Social Responsibility

OpenAIRE

Sun Mei; Nagata Katsuya; Onoda Hiroshi

2011-01-01

With the resource exhaustion, bad affections of human activities and the awakening of the human rights, the corporate social responsibility became popular corporate strategy achieving sustainable development of both corporation and society. The issue of Guideline of Chinese Corporate Social Responsibility Report promotes greatly corporation to take social responsibility. This paper built the index system according to this guideline and takes the textile industry as an exa...

78 FR 51053 - Airworthiness Directives; Beechcraft Corporation and Hawker Beechcraft Corporation

Science.gov (United States)

2013-08-20

... Airworthiness Directives; Beechcraft Corporation and Hawker Beechcraft Corporation AGENCY: Federal Aviation... certain Beechcraft Corporation (type certificate previously held by Hawker Beechcraft Corporation) Models 58, 95-C55, E55, and 56TC airplanes; and Hawker Beechcraft Corporation Models 58P and 58TC airplanes...

Storing plastics in the Cold – more harm than good?

DEFF Research Database (Denmark)

Shashoua, Yvonne

2005-01-01

from ambient. Methylene blue powder was used to indicate the formation of condensation. Dimensional changes were determined on cooling. Thinwalled plastics may be safely placed in freezers protected only by a closed polyethylene bag. The same approach cannot be applied to thick-walled plastics......Storage of plastics at low temperatures has been proposed as a low-cost, lowmaintenance technique. The research described here concerned the results of cooling thin- and thick-walled (greater than 10 mm) plastics materials. Tinytalk loggers were used to record temperature profiles during cooling......, particularly those containing plasticized PVC because of large dimensional changes and formation of condensation....

Recycling of plastic waste: Screening for brominated flame retardants (BFRs)

DEFF Research Database (Denmark)

Pivnenko, Kostyantyn; Granby, Kit; Eriksson, Eva

2017-01-01

,4,6-TBP)), hexabromocyclododecane stereoisomers (α-, β-, and γ-HBCD), as well as selected polybrominated diphenyl ethers (PBDEs) in samples of household waste plastics, virgin and recycled plastics. A considerable number of samples contained BFRs, with highest concentrations associated with acrylonitrile...

Produce of seedlings of cedar in function of types of container and fertilization sources

Directory of Open Access Journals (Sweden)

Osmar Henrique de Castro Pias

2015-06-01

Full Text Available The aim of this study was to evaluate the production of cedar seedlings according to the size of containers and nutrient sources. It was tested three types of containers (Root trainers, plastic bag and plastic vase, three sources of fertilization (Conventional, Kimcoat® and Osmocote® in seven evaluations. The cedar seedlings in root trainers, fertilized with source Osmocote® presented the greatest increments in height and stem diameter when compared to another sources of fertilization. The plastic bag and plastic vase containers promoted similar seedlings height growth. However the seedlings grown in plastic vase presented greatest growth in stem diameter when compared with the ones in plastic bag.

78 FR 52982 - Experian, Experian US Headquarters: Corporate Departments (Finance, HRMD, Contracts, Corporate...

Science.gov (United States)

2013-08-27

...,506R] Experian, Experian US Headquarters: Corporate Departments (Finance, HRMD, Contracts, Corporate... Headquarters: Corporate Departments (finance, HRMD, Contracts, Corporate Marketing, Global Corporate Systems... (finance, HRMD, Contracts, Corporate Marketing, Global Corporate Systems, Legal & Regulatory, Risk...

Fluidized-Bed Gasification of Plastic Waste, Wood, and Their Blends with Coal

Directory of Open Access Journals (Sweden)

Lucio Zaccariello

2015-08-01

Full Text Available The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV progressively increased from 5.1 to 7.9 MJ/Nm3 when the plastic waste fraction was moved from 0% to 100%. Higher carbonaceous fines production was associated with the fuel containing a large fraction of coal (60%, producing 87.5 g/kgFuel compared to only 1.0 g/kgFuel obtained during the gasification test with just plastic waste. Conversely, plastic waste gasification produced the highest tar yield, 161.9 g/kgFuel, while woody biomass generated only 13.4 g/kgFuel. Wood gasification showed a carbon conversion efficiency (CCE of 0.93, while the tests with two fuels containing coal showed lowest CCE values (0.78 and 0.70, respectively. Plastic waste and wood gasification presented similar cold gas efficiency (CGE values (0.75 and 0.76, respectively, while that obtained during the co-gasification tests varied from 0.53 to 0.73.

Corporate Taxation and Corporate Governance

DEFF Research Database (Denmark)

Köthenbürger, Marko; Stimmelmayr, Michael

2009-01-01

if the corporate tax system exempts the normal return on investment from taxation. The optimal system may well use the full return on investment as a tax base. Hence, tax systems such as an Allowance for Corporate Equity (ACE) or a Cash-flow tax do not have the familiar efficiency-enhancing effects in the presence...

Migration of DEHP from plastic to food simulants under microwave heating

Science.gov (United States)

Zhu, X.; Li, F.; Qiu, Z. Z.; Huang, J. W.

2017-05-01

The migration of plasticizer DEHP from the plastic products (4 kinds of commonly used plastic food containers under microwave heating: plastic wrap, food bags, ordinary plastic boxes, microwave special plastic boxes) through food contact materials to food simulants (isooctane, 10% ethanol-water solution (v/v), 3% acetic acid-water solution (w/w) and distilled water) was studied under microwave heating (power levels of 400 W). The results shows that the DEHP mobility increases with the increase of microwave heating time, DEHP mobility in isooctane and 3% acetic acid-water solution (w/w) is significantly greater than in 10% ethanol-water solution (v/v) and distilled water; the order of DEHP mobility in isooctane is plastic wrap>food bag>common plastic box>microwave-safe plastic box, while in 3% acetic acid (w/w), the order is food bag>common plastic box>microwave-safe plastic box>plastic wrap.

Determining the bio-based content of bio-plastics used in Thailand by radiocarbon analysis

Science.gov (United States)

Ploykrathok, T.; Chanyotha, S.

2017-06-01

Presently, there is an increased interest in the development of bio-plastic products from agricultural materials which are biodegradable in order to reduce the problem of waste disposal. Since the amount of modern carbon in bio-plastics can indicate how much the amount of agricultural materials are contained in the bio-plastic products, this research aims to determine the modern carbon in bio-plastic using the carbon dioxide absorption method. The radioactivity of carbon-14 contained in the sample is measured by liquid scintillation counter (Tri-carb 3110 TR, PerkinElmer). The percentages of bio-based content in the samples were determined by comparing the observed modern carbon content with the values contained in agricultural raw materials. The experimental results show that only poly(lactic acid) samples have the modern carbon content of 97.4%, which is close to the agricultural materials while other bio-plastics types are found to have less than 50% of the modern carbon content. In other words, most of these bio-plastic samples were mixed with other materials which are not agriculturally originated.

Determining the bio-based content of bio-plastics used in Thailand by radiocarbon analysis

International Nuclear Information System (INIS)

Ploykrathok, T; Chanyotha, S

2017-01-01

Presently, there is an increased interest in the development of bio-plastic products from agricultural materials which are biodegradable in order to reduce the problem of waste disposal. Since the amount of modern carbon in bio-plastics can indicate how much the amount of agricultural materials are contained in the bio-plastic products, this research aims to determine the modern carbon in bio-plastic using the carbon dioxide absorption method. The radioactivity of carbon-14 contained in the sample is measured by liquid scintillation counter (Tri-carb 3110 TR, PerkinElmer). The percentages of bio-based content in the samples were determined by comparing the observed modern carbon content with the values contained in agricultural raw materials. The experimental results show that only poly(lactic acid) samples have the modern carbon content of 97.4%, which is close to the agricultural materials while other bio-plastics types are found to have less than 50% of the modern carbon content. In other words, most of these bio-plastic samples were mixed with other materials which are not agriculturally originated. (paper)

Compact assembly generates plastic foam, inflates flotation bag

Science.gov (United States)

1965-01-01

Device for generating plastic foam consists of an elastomeric bag and two containers with liquid resin and a liquid catalyst. When the walls of the containers are ruptured the liquids come into contact producing foam which inflates the elastomeric bag.

Split ring containment attachment device

International Nuclear Information System (INIS)

Sammel, A.G.

1996-01-01

A containment attachment device is described for operatively connecting a glovebag to plastic sheeting covering hazardous material. The device includes an inner split ring member connected on one end to a middle ring member wherein the free end of the split ring member is inserted through a slit in the plastic sheeting to captively engage a generally circular portion of the plastic sheeting. A collar potion having an outer ring portion is provided with fastening means for securing the device together wherein the glovebag is operatively connected to the collar portion. 5 figs

Corporate Social Responsibility and Corporate Financial Performance: Evidence from Korea

OpenAIRE

Choi, Jong-Seo; Kwak, Young-Min; Choe, Chongwoo

2010-01-01

This paper studies the empirical relation between corporate social responsibility (CSR) and corporate financial performance in Korea using a sample of 1122 firm-years during 2002-2008. We measure corporate social responsibility by both an equal-weighted CSR index and a stakeholder-weighted CSR index suggested by Akpinar et al. (2008). Corporate financial performance is measured by ROE, ROA and Tobin’s Q. We find a positive and significant relation between corporate financial performance and t...

Corporate Foundations

DEFF Research Database (Denmark)

Herlin, Heidi; Thusgaard Pedersen, Janni

2013-01-01

action between business and NGOs through convening, translation, collaboration, and mediation. Our study provides valuable insights into the tri-part relationship of company foundation NGO by discussing the implications of corporate foundations taking an active role in the realm of corporate social...... responsibility (CSR). The paper hence illuminates the fascinating and overlooked role of corporate foundations as potential bridges between business and civil society. It also informs theory on boundary organizations by clarifying challenges and limits of such institutions.......This paper aims to explore the potential of Danish corporate foundations as boundary organizations facilitating relationships between their founding companies and non-governmental organizations (NGOs). Hitherto, research has been silent about the role of corporate foundations in relation to cross...

Evaluation Of Gas Diffusion Through Plastic Materials Used In Experimental And Sampling Equipment

DEFF Research Database (Denmark)

Kjeldsen, Peter

1993-01-01

. Calculations show that diffusion of oxygen through plastic tubing and reactors into anoxic water can be a serious problem for a series of plastic materials. Comparison of the method for turbulent and laminar flow in tubings shows that the difference is insignificant for most cases. Calculations show also......Plastic materials are often used in experimental and sampling equipment. Plastics are not gas tight, since gases are able to diffuse through the walls of tubing and containers made of plastic. Methods for calculating the significance of gas diffusion through the walls of containers and the walls...... of tubings for both turbulent and laminar flow conditions is presented. A more complex model for diffusion under laminar flow conditions is developed. A comprehensive review on gas diffusion coefficients for the main gases (O2, N2, CO2, CH4 etc.) and for a long range of plastic materials is also presented...

Stability of tranexamic acid in 0.9% sodium chloride, stored in type 1 glass vials and ethylene/propylene copolymer plastic containers.

Science.gov (United States)

McCluskey, Susan V; Sztajnkrycer, Matthew D; Jenkins, Donald A; Zietlow, Scott P; Berns, Kathleen S; Park, Myung S

2014-01-01

Tranexamic acid has recently been demonstrated to decrease all-cause mortality and deaths due to hemorrhage in trauma patients. The optimal administration of tranexamic acid is within one hour of injury, but not more than three hours from the time of injury. To aid with timely administration, a premixed solution of 1 gram tranexamic acid and 0.9% sodium chloride was proposed to be stocked as a medication in both the aeromedical transport helicopters and Emergency Department at Mayo Clinic Hospital--Rochester Saint Marys Campus. Since no published stability data exists for tranexamic acid diluted with 0.9% sodium chloride, this study was undertaken to determine the stability of tranexamic acid diluted with 0.9% sodium chloride while being stored in two types of containers. Stability was determined through the use of a stability-indicating high-performance liquid reverse phase chromatography assay, pH, and visual tests. Tranexamic acid solutions of 1 gram in 0.9% sodium chloride 65 mL were studied at predetermined intervals for 90 days in ethylene/propylene copolymer plastic containers, protected from light, and at both controlled room and refrigerated temperatures. Tranexamic acid solutions of 1 gram in 0.9% sodium chloride 50 mL were studied at predetermined intervals for 180 days in clear Type 1 borosilicate glass vials sealed with intact elastomeric, Flourotec-coated stoppers, stored protected from light at controlled room temperature. Solutions stored in the ethylene/propylene copolymer plastic containers at both storage temperatures maintained at least 98% of initial potency throughout the 90-day study period. Solutions stored in glass vials at controlled room temperature maintained at least 92% of initial potency throughout the 180-day study period. Visual and pH tests revealed stable, clear, colorless, and particulate-free solutions throughout the respective study periods.

Energy recycling of plastic and rubber wastes

International Nuclear Information System (INIS)

Hussain, R.

2003-01-01

Major areas for applications of plastics and rubbers are building and construction, packaging, transportation, automobiles, furniture, house wares, appliances, electrical and electronics. Approximately 20% of all the plastics produced are utilized by the building and construction industry/sup (1-3)/. Categories of polymers mostly used in the above industries include poly (vinyl chloride), polypropylene, polyethylene, polystyrene phenolics, acrylics and urethanes. Tyres and tubes are almost exclusively made up of rubbers. One third of total consumption of plastics finds applications, like films, bottles and packaging, in food-products that have a maximum life-span of two years, after which these find way to waste dumps. As the polymer industry in Pakistan is set to grow very rapidly in the near future the increase in utilization of plastic products in synchronous with the advent of computers and information technology. About 0.60 Kg per capita of waste generated daily in Lahore /(7.14)/ contains considerable quantity of plastics. (AB)

Recycling of plastic waste: Screening for brominated flame retardants (BFRs).

Science.gov (United States)

Pivnenko, K; Granby, K; Eriksson, E; Astrup, T F

2017-11-01

Flame retardants are chemicals vital for reducing risks of fire and preventing human casualties and property losses. Due to the abundance, low cost and high performance of bromine, brominated flame retardants (BFRs) have had a significant share of the market for years. Physical stability on the other hand, has resulted in dispersion and accumulation of selected BFRs in the environment and receiving biota. A wide range of plastic products may contain BFRs. This affects the quality of waste plastics as secondary resource: material recycling may potentially reintroduce the BFRs into new plastic product cycles and lead to increased exposure levels, e.g. through use of plastic packaging materials. To provide quantitative and qualitative data on presence of BFRs in plastics, we analysed bromophenols (tetrabromobisphenol A (TBBPA), dibromophenols (2,4- and 2,6-DBP) and 2,4,6-tribromophenol (2,4,6-TBP)), hexabromocyclododecane stereoisomers (α-, β-, and γ-HBCD), as well as selected polybrominated diphenyl ethers (PBDEs) in samples of household waste plastics, virgin and recycled plastics. A considerable number of samples contained BFRs, with highest concentrations associated with acrylonitrile butadiene styrene (ABS, up to 26,000,000ngTBBPA/g) and polystyrene (PS, up to 330,000ng∑HBCD/g). Abundancy in low concentrations of some BFRs in plastic samples suggested either unintended addition in plastic products or degradation of higher molecular weight BFRs. The presence of currently restricted flame retardants (PBDEs and HBCD) identified in the plastic samples illustrates that circular material flows may be contaminated for extended periods. The screening clearly showed a need for improved documentation and monitoring of the presence of BFRs in plastic waste routed to recycling. Copyright © 2017 Elsevier Ltd. All rights reserved.

Plastic solidification of radioactive wastes

International Nuclear Information System (INIS)

Moriyama, Noboru

1981-01-01

Over 20 years have elapsed after the start of nuclear power development, and the nuclear power generation in Japan now exceeds the level of 10,000 MW. In order to meet the energy demands, the problem of the treatment and disposal of radioactive wastes produced in nuclear power stations must be solved. The purpose of the plastic solidification of such wastes is to immobilize the contained radionuclides, same as other solidification methods, to provide the first barrier against their move into the environment. The following matters are described: the nuclear power generation in Japan, the radioactive wastes from LWR plants, the position of plastic solidification, the status of plastic solidification in overseas countries and in Japan, the solidification process for radioactive wastes with polyethylene, and the properties of solidified products, and the leachability of radionuclides in asphalt solids. (J.P.N.)

Pengungkapan Corporate Social Responsibility, Struktur Corporate Governance dan Nilai Perusahaan

Directory of Open Access Journals (Sweden)

Salmah Pattisahusiwa

2017-06-01

Full Text Available The concept of the corporate social responsibility has a significant interest in Indonesia because believed to increase corporate’s value for shareholders. This study aims to find the effect of corporate social responsibility disclosure and corporate governance structure on corporate value. The data were taken from annual report of mining companies listed in Indonesian Stock Exchange for period of 2014-2015. The sample collection has been done by using purposive sampling with the certain criteria so that 18 companies which meet criteria have been obtained as samples. Multiple Regression analysis was employed to analyze data. The result of this research show that corporate social responsibility disclosure and corporate governance structure have significant effect to thecorporate value.

White-faced storm-petrels Pelagodroma marina predated by gulls as biological monitors of plastic pollution in the pelagic subtropical Northeast Atlantic

International Nuclear Information System (INIS)

Furtado, Ricardo; Menezes, Dilia; Santos, Carolina Jardim; Catry, Paulo

2016-01-01

Marine plastic pollution is rapidly growing and is a source of major concern. Seabirds often ingest plastic debris and are increasingly used as biological monitors of plastic pollution. However, virtually no studies have assessed plastics in seabirds in the deep subtropical North Atlantic. We investigated whether remains of white-faced storm-petrels (WFSP) present in gull pellets could be used for biomonitoring. We analysed 263 pellets and 79.0% of these contained plastic debris originating in the digestive tract of WFSP. Pellets with no bird prey did not contain plastics. Most debris were fragments (83.6%) with fewer plastic pellets (8.2%). Light-coloured plastics predominated (71.0%) and the most frequent polymer was HDPE (73.0%). Stable isotopes in toe-nails of WFSP containing many versus no plastics did not differ, indicating no individual specialisation leading to differential plastic ingestion. We suggest WFSP in pellets are highly suitable to monitor the little known pelagic subtropical Northeast Atlantic. - Highlights: • Plastics in gull pellets reflect contamination of their avian prey. • 79% of white-faced storm petrels in the Northeast Atlantic contain plastics. • Gull pellets are suitable to monitor the little known subtropical NE Atlantic.

Corporate Entrepreneurship

DEFF Research Database (Denmark)

Lassen, Astrid Heidemann

Corporate entrepreneurship is often highlighted as being more relevant than ever, as a viable means for existing organizations to pursue creative new solutions to the complex challenges facing firms today. This includes continuously exploring and exploiting previously unexploited opportunities......, and thereby moving the organization to a new state of being. In spite of a general consensus on a strong interlinkage between the concepts of innovation and corporate entrepreneurship, the nature of this linkage is rarely addressed directly. This has made further research in the two areas problematic, mainly...... nature of corporate entrepreneurship and innovation by exploring the role played by innovation in corporate entrepreneurship. - Develop a framework of corporate entrepreneurial innovation which facilitates an understanding of challenges related hereto and practices applied to overcome these challenges...

Containers and Packaging: Product-Specific Data

Science.gov (United States)

This web page provide numbers on the different containers and packaging products in our municipal solid waste. These include containers of all types, such as glass, steel, plastic, aluminum, wood, and other types of packaging

Outsourcing of Corporate Information Services: Implications for Redesigning Corporate Library Services.

Science.gov (United States)

Agada, John

1996-01-01

Examines the trend in outsourcing information services and suggests it threatens the survival of corporate libraries. Topics include changes in the competitive corporate environment; characteristics of outsourceable services; managing change; redesigning the corporate librarian's role; and implications for redesigning corporate information…

Optical Communication over Plastic Optical Fibers Integrated Optical Receiver Technology

CERN Document Server

Atef, Mohamed

2013-01-01

This book presents high-performance data transmission over plastic optical fibers (POF) using integrated optical receivers having good properties with multilevel modulation, i.e. a higher sensitivity and higher data rate transmission over a longer plastic optical fiber length. Integrated optical receivers and transmitters with high linearity are introduced for multilevel communication. For binary high-data rate transmission over plastic optical fibers, an innovative receiver containing an equalizer is described leading also to a high performance of a plastic optical fiber link. The cheap standard PMMA SI-POF (step-index plastic optical fiber) has the lowest bandwidth and the highest attenuation among multimode fibers. This small bandwidth limits the maximum data rate which can be transmitted through plastic optical fibers. To overcome the problem of the plastic optical fibers high transmission loss, very sensitive receivers must be used to increase the transmitted length over POF. The plastic optical fiber li...

Corporate branding with the help of corporate real estate

NARCIS (Netherlands)

Appel - Meulenbroek, H.A.J.A.; Havermans, D.W.Q.; Kempen, van A.J.M.; Lundstrom, S.

2009-01-01

Nowadays, many companies try to attract customers by bundling all marketing efforts under a common corpo-rate brand to reflect the organization’s identity. The principle of corporate branding suggests that the corporate brand ought to be thoroughly embedded throughout the entire company in order to

[The behavior of fiber-reinforced plastics during laser cutting].

Science.gov (United States)

Emmrich, M; Levsen, K; Trasser, F J

1992-06-01

The pattern of the organic emissions, which are produced by processing of fibre reinforced plastics (epoxy resins reinforced by aramid and glass fibres and phenol resins reinforced by aramid fibre) with laser beam was studied and the concentrations of the main components determined. Despite the application of plastic materials with different chemical structures, the observed patterns are very similar. Mainly aromatic hydrocarbons are emitted, especially benzene and toluene, as well as some heteroatom-containing aromatic hydrocarbons (e.g. phenol). By use of oxygen as process gas the emissions during cutting of glass fibre reinforced plastics can be reduced, while they will be constantly high with aramid fibre reinforced plastics.

Corporate environmental responsibility – a key determinant of corporate reputation

Directory of Open Access Journals (Sweden)

Cristina GĂNESCU

2014-06-01

Full Text Available This paper aims to determine the trend of the relationship between corporate environmental responsibility and corporate reputation by focusing on a study of the European automotive sector. The starting point of our research is content analysis of the sustainability or social responsibility reports published in 2010, 2011, and 2012 by 13 businesses operating in the European automotive industry. Content analysis was carried out in order to identify the indicators used to assess corporate environmental responsibility. The methodology aimed to produce an evaluation model for corporate environmental responsibility based on the following variables reported by companies: carbon dioxide emissions, water consumption, energy consumption, and amount of waste. Corporate reputation of sampled organizations was assessed based on content analysis of the 2010, 2011, and 2012 reports of the Reputation Institute. We applied the correlation of panel data and emphasised the fact that high levels of corporate environmental responsibility sustain high levels of corporate reputation. The study highlights the theoretical considerations that support this relationship. As companies become increasingly accountable, the methodology described in our study can be developed in further research by using other variables to measure corporate environmental responsibility.

GluN2B-containing NMDA receptors blockade rescues bidirectional synaptic plasticity in the bed nucleus of the stria terminalis of cocaine self-administering rats.

Science.gov (United States)

deBacker, Julian; Hawken, Emily R; Normandeau, Catherine P; Jones, Andrea A; Di Prospero, Cynthia; Mechefske, Elysia; Gardner Gregory, James; Hayton, Scott J; Dumont, Éric C

2015-01-01

Drugs of abuse have detrimental effects on homeostatic synaptic plasticity in the motivational brain network. Bidirectional plasticity at excitatory synapses helps keep neural circuits within a functional range to allow for behavioral flexibility. Therefore, impaired bidirectional plasticity of excitatory synapses may contribute to the behavioral hallmarks of addiction, yet this relationship remains unclear. Here we tracked excitatory synaptic strength in the oval bed nucleus of the stria terminalis (ovBNST) using whole-cell voltage-clamp recordings in brain slices from rats self-administering sucrose or cocaine. In the cocaine group, we measured both a persistent increase in AMPA to NMDA ratio (A:N) and slow decay time of NMDA currents throughout the self-administration period and after withdrawal from cocaine. In contrast, the sucrose group exhibited an early increase in A:N ratios (acquisition) that returned toward baseline values with continued self-administration (maintenance) and after withdrawal. The sucrose rats also displayed a decrease in NMDA current decay time with continued self-administration (maintenance), which normalized after withdrawal. Cocaine self-administering rats exhibited impairment in NMDA-dependent long-term depression (LTD) that could be rescued by GluN2B-containing NMDA receptor blockade. Sucrose self-administering rats demonstrated no impairment in NMDA-dependent LTD. During the maintenance period of self-administration, in vivo (daily intraperitoneally for 5 days) pharmacologic blockade of GluN2B-containing NMDA receptors did not reduce lever pressing for cocaine. However, in vivo GluN2B blockade did normalize A:N ratios in cocaine self-administrating rats, and dissociated the magnitude of ovBNST A:N ratios from drug-seeking behavior after protracted withdrawal. Altogether, our data demonstrate when and how bidirectional plasticity at ovBNST excitatory synapses becomes dysfunctional with cocaine self-administration and that NMDA

Corporate social responsibility, corporate reputation and employee engagement

OpenAIRE

Ali, Imran; Ali, Jawaria Fatima

2011-01-01

Corporate social responsibility (CSR) has been outlined as voluntarily additional legal duties of organization to serve environment and community. This voluntarily actions of corporate help them to develop reputation which can shape favorable attitude of employees towards work. Employee engagement is an attitude of commitment and involvement of employee towards their work and organization. Researchers have proved that engaged employees are more productive, more likely to achieve corporate go...

Using corporate stories to build the corporate brand:an impression management perspective

OpenAIRE

Spear, Sara; Roper, Stuart

2013-01-01

Purpose – A recent area of academic interest within corporate branding and reputation is the use of storytelling in order to differentiate the corporate brand, however there is little empirical research exploring the contents of corporate stories, and how they are used by organisations to build the corporate brand. This paper aims to utilise impression management theory to bring insight into the potential role of corporate stories in shaping the corporate brand. Design/methodology/approach – ...

Corporate governance, corporate finance and stock markets in emerging countries

OpenAIRE

Singh, Ajit

2003-01-01

This paper focuses on the inter-relationship between corporate governance, financing of corporate growth and stock market development in emerging countries. It explores both theoretically and empirically the nature of the inter-relationships between these phenomena, as well their implications for economic policy. It concentrates on how corporate growth is financed, an area where the literature has identified important anomalies in relation to corporate behaviour and governance. The paper prov...

U.S. Navy Shipboard-Generated Plastic Waste Pilot Recycling Program

Science.gov (United States)

1991-03-01

ship’s stores or vending machines often makes it way into "plastics only" containers located in work and berthing spaces. During the Escambia MRFsort...from Ships, or MARPOL). This legislation, which bans the disposal of plastics into the ocean, resulted from international and national pressures to halt...plastic by weight from a mixed, municipal waste stream produces a good product using the Er-1 extrusion technology. The Er-1 machine is a batch

78 FR 22923 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Notice of Filing of Amended...

Science.gov (United States)

2013-04-17

..., Senior Associate Counsel and Corporate Secretary, FICC, to Joseph P. Kamnik, Assistant Director, Division... regarding the structure and operations of FICC have been largely derived from information contained in FICC... thereafter.\\8\\ On October 16, 1987, the Government Securities Clearing Corporation (``GSCC''), filed with the...

76 FR 37793 - Viking Range Corporation, Provisional Acceptance of a Settlement Agreement and Order

Science.gov (United States)

2011-06-28

... Corporation, containing a civil penalty of $450,000.00. DATES: Any interested person may ask the Commission... existing under the laws of the State of Mississippi, with its principal corporate office located at 111 W... a substantial product hazard, or created an unreasonable risk of serious injury or death, Viking...

Abiotic and Biotic Degradation of Oxo-Biodegradable Plastic Bags by Pleurotus ostreatus

OpenAIRE

da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Bazzolli, Denise Mara Soares; Tótola, Marcos Rogério; Demuner, Antônio Jacinto; Kasuya, Maria Catarina Megumi

2014-01-01

In this study, we evaluated the growth of Pleurotus ostreatus PLO6 using oxo-biodegradable plastics as a carbon and energy source. Oxo-biodegradable polymers contain pro-oxidants that accelerate their physical and biological degradation. These polymers were developed to decrease the accumulation of plastic waste in landfills. To study the degradation of the plastic polymers, oxo-biodegradable plastic bags were exposed to sunlight for up to 120 days, and fragments of these bags were used as su...

Do Better Institutions Mitigate Agency Problems? Evidence from Corporate Finance Choices

OpenAIRE

Mariassunta Giannetti

2000-01-01

This paper examines how firm characteristics, the legal system and financial development affect corporate finance decisions using a novel and unexplored data set containing balance sheet information for listed and unlisted companies. Contrary to the previous literature, by using data on unlisted companies of small dimension, the paper shows that institutions play an important role in determining the extent of agency problems in corporate finance decisions. In particular, it emerges that in co...

Corporate Governance as a Crucial Factor in Achieving Sustainable Corporate Performance

Directory of Open Access Journals (Sweden)

Julija Bistrova

2014-06-01

Full Text Available In the developed stock markets the corporate governance aspect is crucial in the stock portfolio selection process for investor seeking to achieve shareholder value sustainability. In the emerging markets the importance of the corporate governance role just starts to be realized by the investors and by the corporate managers. The present research, looking at the stock performance leaders and laggards, analyzes whether the corporate governance system matters to achieve long-term shareholder value within the Central and Eastern European stock markets universe. Corporate governance quality was assessed and compared among the out- and underperformers. The financial results plausibility and the ownership structure were considered as well. Additionally, the authors analyzed whether the quality of corporate governance influences the economic performance of the company. The obtained results provide the proof that the corporate governance does matter as the market outperformers have above average corporate governance quality and provide trustworthy financial results more often than the underperforming companies. Besides, well-governed companies are also able to deliver more attractive financial results.

Low cost plastic scintillator by using commercial polystyrene

International Nuclear Information System (INIS)

Oktar, O.; Ari, G.; Guenduez, O.; Demirel, H.; Demirbas, A.

2009-01-01

Plastic scintillation detectors have been used in nuclear and high energy physics for many decades. Among their benefits are fast response, ease of manufacture and versatility. Their main drawbacks are radiation resistance and cost. Plastic Scintillators can be described as solid materials which contain organic fluorescent compounds dissolved within a polymer matri10. Transparent plastics commonly used for light scintillation are Polystyrene (or PS, poly-vinyl-benzene) and polyvinyl-toluene (or PVT, poly-methyl-styron). In this activity, preliminary studies for low cost plastic scintillator production by using commercial polystyrene pellets and extrusion method were aimed. For this purpose, PS blocks consist of commercial fluorescent dopant were prepared by an extruder in SANAEM. Molds suitable for extruder were designed and manufactured and optimum production parameters such as extrusion temperature profile, extrusion rate and pressure were obtained. Plastic blocks prepared were optically and mechanically tested and its response against various radioactive sources was measured.This study has shown that plastic scintillators imported can be produced in SANAEM domestically and be used for detection of radioactive materials within the country or border gates.

White-faced storm-petrels Pelagodroma marina predated by gulls as biological monitors of plastic pollution in the pelagic subtropical Northeast Atlantic.

Science.gov (United States)

Furtado, Ricardo; Menezes, Dilia; Santos, Carolina Jardim; Catry, Paulo

2016-11-15

Marine plastic pollution is rapidly growing and is a source of major concern. Seabirds often ingest plastic debris and are increasingly used as biological monitors of plastic pollution. However, virtually no studies have assessed plastics in seabirds in the deep subtropical North Atlantic. We investigated whether remains of white-faced storm-petrels (WFSP) present in gull pellets could be used for biomonitoring. We analysed 263 pellets and 79.0% of these contained plastic debris originating in the digestive tract of WFSP. Pellets with no bird prey did not contain plastics. Most debris were fragments (83.6%) with fewer plastic pellets (8.2%). Light-coloured plastics predominated (71.0%) and the most frequent polymer was HDPE (73.0%). Stable isotopes in toe-nails of WFSP containing many versus no plastics did not differ, indicating no individual specialisation leading to differential plastic ingestion. We suggest WFSP in pellets are highly suitable to monitor the little known pelagic subtropical Northeast Atlantic. Copyright © 2016 Elsevier Ltd. All rights reserved.

Measuring Corporate Sustainability and Environmental, Social, and Corporate Governance Value Added

Directory of Open Access Journals (Sweden)

Alena Kocmanová

2016-09-01

Full Text Available The aim of the paper is to propose a model for measuring sustainable value which would complexly assess environmental, social, and corporate governance contribution to value creation. In the paper the concept of the Sustainable Environmental, Social and Corporate Governance Value Added is presented. The Sustainable Environmental, Social and Corporate Governance Value Added is based on the Sustainable Value Added model and combines weighted environmental, social, and corporate governance indicators with their benchmarks determined by Data Envelopment Analysis. Benchmark values of indicators were set for each company separately and determine the optimal combination of environmental, social, and corporate governance inputs to economic outcomes. The Sustainable Environmental, Social and Corporate Governance Value Added methodology is applied on real-life corporate data and presented through a case study. The value added of most of the selected companies was negative, even though economic indicators of all of them are positive. The Sustainable Environmental, Social and Corporate Governance Value Added is intended to help owners, investors, and other stakeholders in their decision-making and sustainability assessment. The use of environmental, social, and corporate governance factors helps identify the company’s strengths and weaknesses, and provides a more sophisticated insight into it than the one-dimensional methods based on economic performance alone.

The integration of corporate governance in corporate social responsibility disclosures

NARCIS (Netherlands)

Kolk, A.; Pinkse, J.

2010-01-01

In recent years, not only has attention to corporate governance increased but also the notion has broadened considerably, and started to cover some aspects traditionally seen as being part of corporate social responsibility (CSR). CSR, corporate governance and their interlink seem particularly

Corporate political activities, religiosity and corporate decision making

OpenAIRE

Low, Yik Pui

2017-01-01

Motivated by the recent increase in corporate political spending and the Supreme Court’s decision in allowing firms to freely use their treasury funds for political purposes (Citizens United v Federal Election Commission, 2010), this study examines the impact of corporate political activity (CPA) on its decision making. CPA is defined as the firm’s total annual lobbying expenses arising from the engagement of internal and external lobbyists while corporate decision making is measured in terms...

Corporate Bonds in Denmark

DEFF Research Database (Denmark)

Tell, Michael

2015-01-01

Corporate financing is the choice between capital generated by the corporation and capital from external investors. However, since the financial crisis shook the markets in 2007–2008, financing opportunities through the classical means of financing have decreased. As a result, corporations have...... to think in alternative ways such as issuing corporate bonds. A market for corporate bonds exists in countries such as Norway, Germany, France, the United Kingdom and the United States, while Denmark is still behind in this trend. Some large Danish corporations have instead used foreign corporate bonds...... markets. However, NASDAQ OMX has introduced the First North Bond Market in December 2012 and new regulatory framework came into place in 2014, which may contribute to a Danish based corporate bond market. The purpose of this article is to present the regulatory changes in Denmark in relation to corporate...

Corporate sustainability: environmental, social, economic and corporate performance

Directory of Open Access Journals (Sweden)

Alena Kocmanová

2011-01-01

Full Text Available The article deals with corporate sustainability and environmental and social issues of the integration of corporate performance measurement that may lead to sustainable economic success. Sustainability is a strategy of the process of sustainable development. Sustainability of businesses and sustainable performance can be defined as an integration of environmental, social and economic performance. First and foremost, businesses will want to know what indicators can be used to measure environmental, social and economic performance. What is the mutual relationship between environmental, social and economic performance? How can firms arrive at a comprehensive assessment of their performance in relation to sustainability? The aim of this paper is to analyze corporate environmental, social and economic performance and to analyze their mutual relationships. The final part of the article is an assessment of the contemporary situation and draft Key Performance Indicators (KPI for assessment of corporate sustainability that will be the subject of further research in a selected NACE-CZ sector and in accordance with Corporate Sustainability Reporting. KPI provide businesses with a means of measuring progress toward achieving objectives.

Lead contamination of inexpensive plastic jewelry

Energy Technology Data Exchange (ETDEWEB)

Yost, Jamie L. [Department of Chemistry, Ashland University, Ashland, Ohio (United States); Weidenhamer, Jeffrey D. [Department of Chemistry, Ashland University, Ashland, Ohio (United States)], E-mail: jweiden@ashland.edu

2008-04-15

The neurological hazards of lead to children are well-known. As a result of recent documented cases of lead poisoning, regulatory attention in the United States has focused on the lead content of children's metal jewelry. By contrast, little is known about the possible hazards of plastic jewelry items. The objective of this study was to determine whether inexpensive plastic jewelry is a possible source of toxic lead for children. Samples of more than 100 inexpensive plastic jewelry items were analyzed for lead content. Beads were screened by soaking in 1 M nitric acid. Nine items found to release more than 30 {mu}g of lead per bead were further tested for accessible lead, and scrapings of the bead coatings were analyzed for total lead content. The maximum accessible lead found was 49 {mu}g per bead, which is below the current US Consumer Product Safety Commission limit of 175 {mu}g. However, when the number of beads in each item was taken into account, six of the nine leaded samples contained more than 175 {mu}g accessible lead per item. The lead in these items appears to be associated with lead-based paints used to produce glossy coatings on imitation pearls and similar items. Coatings obtained by scraping individual beads contained 3.5-23% lead, which far exceeds the US regulatory limit of 0.06% lead in paints on items intended for children. Our results demonstrate that plastic jewelry items merit the attention of public health and consumer protection agencies seeking to limit the exposure of children to lead.

Lead contamination of inexpensive plastic jewelry

International Nuclear Information System (INIS)

Yost, Jamie L.; Weidenhamer, Jeffrey D.

2008-01-01

The neurological hazards of lead to children are well-known. As a result of recent documented cases of lead poisoning, regulatory attention in the United States has focused on the lead content of children's metal jewelry. By contrast, little is known about the possible hazards of plastic jewelry items. The objective of this study was to determine whether inexpensive plastic jewelry is a possible source of toxic lead for children. Samples of more than 100 inexpensive plastic jewelry items were analyzed for lead content. Beads were screened by soaking in 1 M nitric acid. Nine items found to release more than 30 μg of lead per bead were further tested for accessible lead, and scrapings of the bead coatings were analyzed for total lead content. The maximum accessible lead found was 49 μg per bead, which is below the current US Consumer Product Safety Commission limit of 175 μg. However, when the number of beads in each item was taken into account, six of the nine leaded samples contained more than 175 μg accessible lead per item. The lead in these items appears to be associated with lead-based paints used to produce glossy coatings on imitation pearls and similar items. Coatings obtained by scraping individual beads contained 3.5-23% lead, which far exceeds the US regulatory limit of 0.06% lead in paints on items intended for children. Our results demonstrate that plastic jewelry items merit the attention of public health and consumer protection agencies seeking to limit the exposure of children to lead

Adsorption of Cationic Peptides to Solid Surfaces of Glass and Plastic

DEFF Research Database (Denmark)

Kristensen, Kasper; Henriksen, Jonas Rosager; Andresen, Thomas Lars

2015-01-01

, that the peptides adsorb to solid surfaces of glass and plastic. Specifically, we use analytical HPLC to systematically quantify the adsorption of the three cationic membraneactive peptides mastoparan X, melittin, and magainin 2 to the walls of commonly used glass and plastic sample containers. Our results show...

Plastic solidification method for radioactive waste

International Nuclear Information System (INIS)

Tomita, Toshihide; Inakuma, Masahiko.

1992-01-01

Condensed liquid wastes in radioactive wastes are formed by mixing and condensing several kinds of liquid wastes such as liquid wastes upon regeneration of ion exchange resins, floor draining liquid wastes and equipment draining liquid wastes. Accordingly, various materials are contained, and it is found that polymerization reaction of plastics is inhibited especially when reductive material, such as sodium nitrite is present. Then, in the present invention, upon mixing thermosetting resins to radioactive wastes containing reducing materials, an alkaline material is admixed to an unstaturated polyester resin. This can inactivate the terminal groups of unsaturated polyester chain, to prevent the dissociation of the reducing agent such as sodium nitrite. Further, if an unsaturated polyester resin of low acid value and a polymerization initiator for high temperature are used in addition to the alkaline material, the effect is further enhanced, thereby enabling to obtain a strong plastic solidification products. (T.M.)

Disclosure of Financial Conflicts of Interest in Plastic and Reconstructive Surgery.

Science.gov (United States)

Luce, Edward A; Jackman, Carye A

2017-09-01

Recent articles in the scientific literature have expressed concerns about financial conflicts of interest in the profession of medicine in general and the specialty of plastic surgery in particular. Disclosure of financial ties to industry has been regarded as an address of a possible bias. The policies of medical journals places responsibility on authors for self-reporting of financial conflicts of interest, yet underreporting of conflicts of interest has occurred. The investigative hypothesis was that authors in the plastic surgery literature, in particular, Plastic and Reconstructive Surgery, underreported financial conflicts of interest. A review of articles published in Plastic and Reconstructive Surgery from July of 2015 through April of 2016 for author disclosures was accomplished. The disclosure statements were compared to the information available in the Open Payments database for 2015. The lack of disclosure on the part of an author, when present, was individually examined for relevance of the corporate conflicts of interest to the subject matter of the involved article. A total of 302 articles authored by 1262 individuals were reviewed. One hundred thirty-nine (45.5 percent) had neither a disclosed nor an actual conflict of interest. In 61 articles (20.2 percent), one or more authors disclosed; 105 articles (34.8 percent) did not provide disclosure of a financial conflict of interest. In assessment of relevance, 10 undisclosed conflicts of interest (9.5 percent) were determined relevant, and one-third of that total were non-plastic surgeons. Nondisclosure of financial conflicts of interest is common, but only a small minority pose a potential for harm from bias.

Corporate Awakening

DEFF Research Database (Denmark)

LaFrance, Julie; Lehmann, Martin

2005-01-01

Predominantly since the 1992 Rio Summit, corporations have been increasingly pursuing partnerships with public institutions including governments, international organisations and NGOs that aim to contribute to sustainable development activities. Partnerships have become more common as corporation...... public-private partnerships. These theoretical perspectives are used to gain a deeper understanding of the corporate drivers that motivated TOTAL S.A. to approach UNESCO for cooperation on community development programs in Myanmar....

Elastic-plastic analysis of fracture mechanics test specimens. Part 2

International Nuclear Information System (INIS)

Talja, H.; Wallin, K.

1984-12-01

This is second part of the report of the research program 'Comparisons between computational and experimental elastic-plastic results' started at the Technical Research Centre of Finland in 1981. The first part of the research program was reported earlier and contained a two dimensional linear elastic finite element analysis of four specimen geometries (CT, RCT, ASTM-3P and Charpy-V) and testing and elastic-plastic analysis of the specimen (EGF71; 1TCT, material A 542). In this report the second part of the program containing the testing and 2-D elastic-plastic analyses of five specimens is described. The four specimen geometries mentioned above and two different materials (stainless steel AISI 304 and ferrite pressure vessel steel A533B) are considered. The following comparisons are presented in the report: load vs. load displacement curves, J-integral, crack opening displacement (COD), J vs. COD and the size of the plastic zone. The agreement between the computational and experimental results is quite good. Complete agreement can be achieved only with 3-dimensional calculation models. (author)

Exploring corporate eco-modernism: Challenging corporate rhetoric and scientific discourses

DEFF Research Database (Denmark)

Ulhøi, John Parm; Welford, Richard

2000-01-01

in shaping a new corporate environmentalism and, ten years on, we argue that it is time to step back and critically assess the nature and scope of corporate actions and scientific research within the field of corporate environmental management. This paper starts from the assertions that: (i) disturbing...

Evolution of Corporate Essence

DEFF Research Database (Denmark)

Fomcenco, Alex

2016-01-01

that applies to a traditional limited liability company. Its main distinctive attributes are corporate purpose, accountability of its management, and transparency requirements. Although, a Public Benefit Corporation does not impose any revolutionary amendments to the way the traditional corporations are......, it offers a legal framework where public benefit is more important than profits. As a corporate entity, Public Benefit Corporation already exists in numerous jurisdictions and those jurisdictions that do not yet facilitate creation of this corporate form should most definitely consider it....

LPG based all plastic pressure sensor

DEFF Research Database (Denmark)

Bundalo, Ivan-Lazar; Lwin, R.; Leon-Saval, S.

2015-01-01

A prototype all-plastic pressure sensor is presented and characterized for potential use as an endoscope. The sensor is based on Long Period Gratings (LPG) inscribed with a CO2 laser in 6-ring microstructured PMMA fiber. Through a latex coated, plastic 3D-printed transducer pod, external pressure...... is converted to longitudinal elongation of the pod and therefore of the fiber containing the LPG. The sensor has been characterised for pressures of up to 160 mBar in an in-house built pressure chamber. Furthermore, the influence of the fiber prestrain, fiber thickness and the effect of different glues...

7 CFR 1434.8 - Containers and drums.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Containers and drums. 1434.8 Section 1434.8... REGULATIONS FOR HONEY § 1434.8 Containers and drums. (a)(1) To be eligible for assistance under this part, honey must be packed in: (i) CCC-approved, 5-gallon plastic containers; (ii) 5-gallon metal containers...

Structural Plasticity Denoises Responses and Improves Learning Speed

Directory of Open Access Journals (Sweden)

Robin Spiess

2016-09-01

Full Text Available Despite an abundance of computational models for learning of synaptic weights, there has been relatively little research on structural plasticity, i.e. the creation and elimination of synapses. Especially, it is not clear how structural plasticity works in concert with spike-timing-dependent plasticity (STDP and what advantages their combination offers.Here we present a fairly large-scale functional model that uses leaky integrate-and-fire neurons, STDP, homeostasis, recurrent connections, and structural plasticity to learn the input encoding, the relation between inputs, and to infer missing inputs. Using this model, we compare the error and the amount of noise in the network's responses with and without structural plasticity and the influence of structural plasticity on the learning speed of the network.Using structural plasticity during learning shows good results for learning the representation of input values, i.e. structural plasticity strongly reduces the noise of the response by preventing spikes with a high error.For inferring missing inputs we see similar results, with responses having less noise if the network was trained using structural plasticity.Additionally, using structural plasticity with pruning significantly decreased the time to learn weights suitable for inference.Presumably, this is due to the clearer signal containing less spikes that misrepresent the desired value. Therefore, this work shows that structural plasticity is not only able to improve upon the performance using STDP without structural plasticity but also speeds up learning.Additionally, it addresses the practical problem of limited resources for connectivity that is not only apparent in the mammalian neocortex but also in computer hardware or neuromorphic (brain-inspired hardware by efficiently pruning synapses without losing performance.

Radiation resistance of plastic solid

International Nuclear Information System (INIS)

Moriyama, Noboru; Dojiri, Shigeru; Wadachi, Yoshiki

1985-01-01

The radiation from nucleides contained in solidified wates have some effects on the degradation of the solidification materials. This report deals with effects of such radiation on the mechanical strength of waste-plastics composites and on the generation of gasses. It is shown that the mechanical strength of polyethylene and polyester solids will not decrease at a total absorbed dose of 10 6 rad, a dose which a low-level waste composite is expected to receive during an infinite period of time. Rather, it increases in the case of polyethylene. The amount of gas generated from degraded polyethylene is about three times as large as that from polyester, namely, about 6 l per 200 l drum can at 10 6 rad. Hydrogen accounts for about 80 % of the total gas generated from polyethylene. On the other hand, the gas from polyester solid mainly contains hydrogen, carbon dioxide, carbon monoxide and methane, with a composition greatly dependent on the type of the waste contained. It is concluded from these results that plastic materials can serve satisfactorily as for as the effects of radiation on their mechanical strength and gas generation are concerned. A more important problem still remaining to be solved is the effects of radiation on the leaching of radioactive nuclides. (Nogami, K.)

Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture

Directory of Open Access Journals (Sweden)

Abdullah Mohd Ezree

2017-01-01

Full Text Available The objectives of this study are to investigate the engineering properties of the asphalt mixtures containing waste plastic at different percentages i.e. 4%, 6%, 8%, and 10% by weight of bitumen. The experimental tests performed in the study were stability, tensile strength, resilient modulus and dynamic creep test. Results showed that the mixture with 4% plastic has the highest stability (184kN. However, the stability slightly decreases with the increase of plastic additive. On the other hand, the highest tensile strength among the modified asphaltic concrete is 1049kPa (8% plastic added. The modified asphalt mixture with 8% plastic has the highest resilient modulus, which is 3422 MPa (25°C and 494Mpa (40°C. Where the highest creep modulus recorded is 73.30Mpa at 8% plastic added. It can be concluded that the addition of 8% plastic gave the highest value properties of asphalt mixture. Finally, it can be said that 8% plastic is the optimum value adding.

The role of chlorine and additives of PVC-plastic in combustion

International Nuclear Information System (INIS)

Mattila, H.

1991-01-01

The PVC differs from other common plastics due to the chlorine content. As the PVC is combusted, the chlorine is released mainly as hydrogen chloride. The content of chlorinated hydrocarbons is small, but these can also contain polychlorinated dibenzofuranes and dibenzodioxines, which are extremely poisonous. The aim of this study was to find out, what is the portion of PVC combustion in total emission of chlorinated hydrocarbons. Additionally, the amounts chlorine coming into combustion process with ordinary fuels have been estimated, and they are compared with the amounts of PVC. The chloride content of municipal wastes vary in between 0.4-0.9 %. The portion of plastics is about 30 % of the total, and the rest being from paper, food , wood and garden wastes an textiles. Both organic and inorganic chlorine form gaseous hydrogen chlorid in combustion processes. HCl can then react with oxygen and produce caseous chlorine. This can react with unreacted carbon of the smoke and produce different kinds of chlorinated hydrocarbons. The portion of PVC of the chlorine going into combustion in Finland has been estimated to be about 1-2 %. Combustion tests were made using coal and bark and plastic waste as additional fuel. It was noticed that addition of plastic decreased the amount of polyaromatic hydrocarbons in the smoke. Chlorinated dioxins and furans occurred a little less in the gases of combustion of plastic mixtures not containing PVC than in reference tests, but they increased when PVC containing plastic mixture was combusted, but more chlorinated dioxins and furans were absorbed into fly ash, so the emissions remained almost the same

Plastic ingestion by fulmars and shearwaters at Sable Island, Nova Scotia, Canada.

Science.gov (United States)

Bond, Alexander L; Provencher, Jennifer F; Daoust, Pierre-Yves; Lucas, Zoe N

2014-10-15

Plastic pollution is widespread in the marine environment, and plastic ingestion by seabirds is now widely reported for dozens of species. Beached Northern Fulmars, Great Shearwaters, Sooty Shearwaters and Cory's Shearwaters are found on Sable Island, Nova Scotia, Canada regularly, and they can be used to assess plastic pollution. All species except Cory's Shearwaters contained plastic debris in their gastrointestinal tracts. Northern Fulmars, Sooty Shearwaters and Great Shearwaters all showed high prevalence of plastic ingestion (>72%), with Northern Fulmars having the highest number and mass of plastics among the species examined. There was no difference in plastic ingestion between sexes or age classes. In all species user plastics made up the majority of the pieces found, with industrial pellets representing only a small proportion in the samples. Sable Island could be an important monitoring site for plastic pollution in Atlantic Canada. Copyright © 2014 Elsevier Ltd. All rights reserved.

Determinants of recycling common types of plastic product waste in environmental horticulture industry: The case of Georgia.

Science.gov (United States)

Meng, Ting; Klepacka, Anna M; Florkowski, Wojciech J; Braman, Kristine

2016-02-01

Environmental horticulture firms provide a variety of commercial/residential landscape products and services encompassing ornamental plant production, design, installation, and maintenance. The companies generate tons of waste including plastic containers, trays, and greenhouse/field covers, creating the need to reduce and utilize plastic waste. Based on survey data collected in Georgia in 2013, this paper investigates determinants of the environmental horticulture firms' recycling decision (plastic containers, flats, and greenhouse poly). Our findings indicate that the decision to discard vs. recycle plastic containers, flats, and greenhouse poly is significantly influenced by firm scope, size, location, and partnership with recycling providers, as well as whether recycling providers offer additional waste pickup services. Insights from this study are of use to local governments and environmental organizations interested in increasing horticultural firm participation in recycling programs and lowering the volume of plastic destined for landfills. Copyright © 2015 Elsevier Ltd. All rights reserved.

Creating corporate advantage.

Science.gov (United States)

Collis, D J; Montgomery, C A

1998-01-01

What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.

Corporate Language Policies

DEFF Research Database (Denmark)

Sanden, Guro Refsum

This paper offers a review of literature dealing with language policies in general and corporate language policies in particular. Based on a discussion of various definitions of these concepts within two research traditions, i.e. sociolinguistics and international management, a three......-level definition of corporate language policies is presented, emphasising that a corporate language policy is a context-specific policy about language use. The three-level definition is based on the argument that in order to acquire a complete understanding of what corporate language policies involve, one needs...... to consider three progressive questions; 1) what is a policy? 2) what is a language policy?, and ultimately, 3) what is a corporate language policy?...

Corporate Language Policies

DEFF Research Database (Denmark)

Sanden, Guro Refsum

2015-01-01

This paper offers a review of literature dealing with language policies in general and corporate language policies in particular. Based on a discussion of various definitions of these concepts within two research traditions, i.e. sociolinguistics and international management, a three......-level definition of corporate language policies is presented, emphasising that a corporate language policy is a context-specific policy about language use. The three-level definition is based on the argument that in order to acquire a complete understanding of what corporate language policies involve, one needs...... to consider three progressive questions; 1) what is a policy? 2) what is a language policy?, and ultimately, 3) what is a corporate language policy?...

COST EVALUATION OF AUTOMATED AND MANUAL POST- CONSUMER PLASTIC BOTTLE SORTING SYSTEMS

Science.gov (United States)

This project evaluates, on the basis of performance and cost, two Automated BottleSort® sorting systems for post-consumer commingled plastic containers developed by Magnetic Separation Systems. This study compares the costs to sort mixed bales of post-consumer plastic at these t...

Degradation of brominated flame retardant in computer housing plastic by supercritical fluids.

Science.gov (United States)

Wang, Yanmin; Zhang, Fu-Shen

2012-02-29

The degradation process of brominated flame retardant (BFR) and BFR-containing waste computer housing plastic in various supercritical fluids (water, methanol, isopropanol and acetone) was investigated. The results showed that the debromination and degradation efficiencies, final products were greatly affected by the solvent type. Among the four tested solvents, isopropanol was the most suitable solvent for the recovery of oil from BFR-containing plastic for its (1) excellent debromination effectiveness (debromination efficiency 95.7%), (2) high oil production (60.0%) and (3) mild temperature and pressure requirements. However, in this case, the removed bromine mostly existed in the oil. Introduction of KOH into the sc-isopropanol could capture almost all the inorganic bromine from the oil thus bromine-free oil could be obtained. Furthermore, KOH could enhance the depolymerization of the plastic. The obtained oil mainly consisted of single- and duplicate-ringed aromatic compounds in a carbon range of C9-C17, which had alkyl substituents or aliphatic bridges, such as butyl-benzene, (3-methylbutyl)-benzene, 1,1'-(1,3-propanediyl)bis benzene. Phenol, alkyl phenols and esters were the major oxygen-containing compounds in the oil. This study provides an efficient approach for debromination and simultaneous recovering valuable chemicals from BFR-containing plastic in e-waste. Copyright © 2011 Elsevier B.V. All rights reserved.

Plasticity theory

CERN Document Server

Lubliner, Jacob

2008-01-01

The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and

Fouling assemblage of benthic plastic debris collected from Mersin Bay, NE Levantine coast of Turkey.

Science.gov (United States)

Gündoğdu, Sedat; Çevik, Cem; Karaca, Serkan

2017-11-15

The Mediterranean is an ecosystem that faces more and more microplastic pollution every day. This causes the whole of the Mediterranean to face the negative effects of plastic pollution. This study examines the state of plastic debris and fouling organisms found on it in one of the areas most affected by plastic pollution, Mersin Bay. As a result, a total of 3.88kg plastic (mean=0,97kg; n=120; 2670item/km 2 ; 86,3kg/km 2 ) was collected and based on the ATR-FTIR analysis, it was determined that this total contained 9 types of plastics. 17 different fouling species belonging to 6 phylum (Annelida, Arthropoda, Bryozoa, Chordata, Cnidaria, Mollusca) 7 class and 11 order were discovered on plastics. Spirobranchus triqueter, Hydroides sp. and Neopycnodonte cochlear were the most abundant species. In the end, the example of Mersin Bay shows that plastic debris as a substrate can contain a very high diversity of life just like natural substrates. Copyright © 2017 Elsevier Ltd. All rights reserved.

Review of the partitioning of chemicals into different plastics: Consequences for the risk assessment of marine plastic debris

NARCIS (Netherlands)

O'Connor, I.A.; Golsteijn, L.; Hendriks, A.J.

2016-01-01

Marine plastic debris are found worldwide in oceans and coastal areas. They degrade only slowly and contain chemicals added during manufacture or absorbed from the seawater. Therefore, they can pose a long-lasting contaminant source and potentially transfer chemicals to marine organisms when

Removal of brominated flame retardant from electrical and electronic waste plastic by solvothermal technique

International Nuclear Information System (INIS)

Zhang, Cong-Cong; Zhang, Fu-Shen

2012-01-01

Highlights: ► A process for brominated flame retardants (BFRs) removal in plastic was established. ► The plastic became bromine-free with the structure maintained after this treatment. ► BFRs transferred into alcohol solvent were easily debrominated by metallic copper. - Abstract: Brominated flame retardants (BFRs) in electrical and electronic (E and E) waste plastic are toxic, bioaccumulative and recalcitrant. In the present study, tetrabromobisphenol A (TBBPA) contained in this type of plastic was tentatively subjected to solvothermal treatment so as to obtain bromine-free plastic. Methanol, ethanol and isopropanol were examined as solvents for solvothermal treatment and it was found that methanol was the optimal solvent for TBBPA removal. The optimum temperature, time and liquid to solid ratio for solvothermal treatment to remove TBBPA were 90 °C, 2 h and 15:1, respectively. After the treatment with various alcohol solvents, it was found that TBBPA was finally transferred into the solvents and bromine in the extract was debrominated catalyzed by metallic copper. Bisphenol A and cuprous bromide were the main products after debromination. The morphology and FTIR properties of the plastic were generally unchanged after the solvothermal treatment indicating that the structure of the plastic maintained after the process. This work provides a clean and applicable process for BFRs-containing plastic disposal.

Corporate culture: It's impact on corporate life and business ...

African Journals Online (AJOL)

Corporate culture: It's impact on corporate life and business practices in Nigeria. ... on the work behaviour of management strategists and business policy makers. ... culture include, multinational organizations as well as mergers/acquisitions.

Еnterprise’s corporate management improvement on the base of corporate culture development

Directory of Open Access Journals (Sweden)

T.O. Biliak

2016-12-01

Full Text Available The author reveals extremely important role of corporate culture and uniqueness of the corporate culture system. It is established that the corporate management is characterized above all, by the economic activity and corporate culture practice. The securement of the balance in the process of interaction between organization and its environment plays one of the key roles in any management system. The author determines the influence of corporate culture on the business activity of the enterprise, when personnel predicts the situation development according to which they build models and evaluate their behavior. While realizing them in their activity employees strengthen certain trends and create in such a way appropriate situations. The search of ways of development and changing corporate culture as the base of corporate management improvement is conducted with the use of the strategic approach. The creation of a corporate culture that supports the development strategy of the enterprise, is an essential component of effective business and management, because the culture shapes a socio-psychological climate and corporate spirit which contributes to the operational execution of tasks and achievement of certain goals. Accordingly to the mentioned above, the set of measures of enterprise’s corporate culture development securement is proposed.

Gelatin films plasticized with a simulated biodiesel coproduct stream

Directory of Open Access Journals (Sweden)

2009-04-01

Full Text Available In order to explore the possibility of substituting an unrefined biodiesel coproduct stream (BCS for refined glycerol as a polymer plasticizer we have prepared cast gelatin films plasticized with a simulated BCS, i.e., mixtures of glycerol and some of the typical components found in BCS (methyl linoleate, methyl oleate, linoleic acid, and oleic acid. We measured the tensile properties as a function of plasticizer composition, and analyzed the specific effect of each individual component on tensile properties. We found that it is the unrecovered alkyl esters that largely determine the tensile properties, and that BCS can be successfully used to plasticize cast gelatin films as long as the BCS contains 11 parts by weight, or less, of unrecovered alkyl esters per 100 parts glycerol.

Corporate Business Diplomacy

DEFF Research Database (Denmark)

Søndergaard, Mikael

2014-01-01

This article illustrates the interdisciplinary nature of the field of corporate business diplomacy using examples from academic disciplines, such as economics and political science, which can contribute to the understanding of corporate business diplomacy. Examples also show that corporate business...... diplomacy can complement business theories such as stakeholder theory and agency theory. Examples from practice show that in a broad sense, corporate business diplomacy is concerned with managing external stakeholders, while in a narrow sense, it is concerned with managing internal stakeholders....... The usefulness of an analytical research triangulation is illustrated....

Presence of plastic particles in waterbirds faeces collected in Spanish lakes.

Science.gov (United States)

Gil-Delgado, J A; Guijarro, D; Gosálvez, R U; López-Iborra, G M; Ponz, A; Velasco, A

2017-01-01

Plastic intake by marine vertebrates has been widely reported, but information about its presence in continental waterfowl is scarce. Here we analyzed faeces of waterbirds species (European coot, Fulica atra, mallard, Anas platyrhynchos and shelduck, Tadorna tadorna) for plastic debris in five wetlands in Central Spain. We collected 89 faeces of shelduck distributed in four lakes, 43.8% of them presented plastic remnants. Sixty percent of 10 faeces of European coot and 45% of 40 faeces of mallard contained plastic debris. Plastic debris found was of two types, threads and fragments, and were identified as remnants of plastic objects used in agricultural fields surrounding the lakes. Differences in prevalence of plastic in faeces, number of plastic pieces per excrement and size of the plastic pieces were not statistically significant between waterfowl species. Thus, our results suggest that plastic may also be frequently ingested by waterfowl in continental waters, at least in our study area. Future studies should address this potential problem for waterbird conservation in other wetlands to evaluate the real impact of this pollutant on waterbirds living in inland water. Copyright © 2016 Elsevier Ltd. All rights reserved.

Corporate boards and ownership structure as antecedents of corporate governance disclosure in Saudi Arabian publicly listed corporations

OpenAIRE

Al-Bassam, Waleed M.; Ntim, Collins G.; Opong, Kwaku K.; Downs, Yvonne

2015-01-01

This study investigate whether and to what extent publicly listed corporations voluntarily comply with and disclose recommended good corporate governance (CG) practices, and distinctively examine whether the observed cross-sectional differences in such CG disclosures can be explained by ownership and board mechanisms with specific focus on Saudi Arabia. Our results suggest that corporations with larger boards, a big-four auditor, higher government ownership, a CG committee and higher institut...

Plastic collapse behavior for thin tube with two parallel cracks

International Nuclear Information System (INIS)

Moon, Seong In; Chang, Yoon Suk; Kim, Young Jin; Lee, Jin Ho; Song, Myung Ho; Choi, Young Hwan; Kim, Joung Soo

2004-01-01

The current plugging criterion is known to be too conservative for some locations and types of defects. Many defects detected during in-service inspection take on the form of multiple cracks at the top of tube sheet but there is no reliable plugging criterion for the steam generator tubes with multiple cracks. Most of the previous studies on multiple cracks are confined to elastic analyses and only few studies have been done on the steam generator tubes failed by plastic collapse. Therefore, it is necessary to develop models which can be used to estimate the failure behavior of steam generator tubes with multiple cracks. The objective of this study is to verify the applicability of the optimum local failure prediction models proposed in the previous study. For this, plastic collapse tests are performed with the tube specimens containing two parallel through-wall cracks. The plastic collapse load of the steam generator tubes containing two parallel through-wall cracks are also estimated by using the proposed optimum global failure model and the applicability is investigated by comparing the estimated results with the experimental results. Also, the interaction effect between two cracks was evaluated to explain the plastic collapse behavior

Bio-based and biodegradable plastics for use in crop production.

Science.gov (United States)

Riggi, Ezio; Santagata, Gabriella; Malinconico, Mario

2011-01-01

The production and management of crops uses plastics for many applications (e.g., low tunnels, high tunnels, greenhouses, mulching, silage bags, hay bales, pheromone traps, coatings of fertilizers or pesticides or hormones or seeds, and nursery pots and containers for growing transplants). All these applications have led some authors to adopt the term "plasticulture" when discussing the use of plastic materials in agriculture and related industries. Unfortunately, the sustainability of this use of plastics is low, and renewability and degradability have become key words in the debate over sustainable production and utilization of plastic. Recently, researchers and the plastics industry have made strong efforts (i) to identify new biopolymers and natural additives from renewable sources that can be used in plastics production and (ii) to enhance the degradability (biological or physical) of the new ecologically sustainable materials. In the present review, we describe the main research results, current applications, patents that have been applied for in the last two decades, and future perspectives on sustainable use of plastics to support crop production. The article presents some promising patents on bio-based and biodegradable plastics for use in crop production.

Plutonium solution storage in plastic bottles: Operational experience and safety issues

International Nuclear Information System (INIS)

Conner, W.V.

1995-01-01

Computer spread sheet models were developed to gain a better understanding of the factors that lead to pressurization and failure of plastic bottles containing plutonium solutions. These models were developed using data obtained from the literature on gas generation rates for plutonium solutions. Leak rates from sealed plastic bottles were obtained from bottle leak tests conducted at Rocky Flats. Results from these bottle leak tests showed that narrow mouth four liter bottles will seal much better than wide mouth four liter bottles. The gas generation rate and leak rate data were used to develop models for predicting the rate of pressurization and maximum pressures expected in sealed bottles of plutonium solution containing various plutonium and acid concentrations. The computer models were used to develop proposed time limits for storing or transporting plutonium solutions in sealed plastic bottles. For plutonium solutions containing 1.5 g/l plutonium, storage in sealed bottles should not be allowed. However, transportation of higher concentration plutonium solution in sealed bottles is required, and safe transportation times of 1 shift to 6 days are proposed

Magical Engineering Plastic

Energy Technology Data Exchange (ETDEWEB)

Kim, Gwang Ung

1988-01-15

This book introduces engineering plastic about advantage of engineering plastic, plastic material from processing method, plastic shock, plastic until now, background of making of engineering plastic, wonderful engineering plastic science such as a high molecule and molecule, classification of high molecule, difference between metal and high molecule, heat and high molecule materials, and property of surface, engineering plastic of dream like from linseed oil to aramid, small dictionary of engineering plastic.

Magical Engineering Plastic

International Nuclear Information System (INIS)

Kim, Gwang Ung

1988-01-01

This book introduces engineering plastic about advantage of engineering plastic, plastic material from processing method, plastic shock, plastic until now, background of making of engineering plastic, wonderful engineering plastic science such as a high molecule and molecule, classification of high molecule, difference between metal and high molecule, heat and high molecule materials, and property of surface, engineering plastic of dream like from linseed oil to aramid, small dictionary of engineering plastic.

Model experiment and numerical simulation of drop impact response of multilayer-combinational container

International Nuclear Information System (INIS)

Xie Ruoze; Zhong Weizhou; Wan Qiang; Huang Xicheng; Zhang Fangju

2015-01-01

The drop impact process of multilayer-combinational container was simulated experimentally using a gas gun, and the normal impact and oblique impact of scaled models were tested. The experiments of scaled models were simulated numerically, and the stress distribution and plastic deformation in the tested structures during collision process were obtained. The results were compared with the experiment data. It was shown that the impact work mainly converted into plastic work due to the plastic deformation of the cushion wood and the plastic hinge in the buckled steel shell. The plastic deformation mainly happened at the collided end of the scaled models, and there was no plastic deformation found far from the collided end. The compressive stress-strain curve of the wood in texture direction can be used to simulate numerically the drop impact process of multilayer-combinational container. (authors)

The Corporate Marketing Department

DEFF Research Database (Denmark)

Ritter, Thomas; Eggert, Andreas; Münkhoff, Eva

Corporate marketing has been downsized or eliminated in many firms. At the same time, firms that still own a corporate marketing department struggle with organizing and positioning their commercial front‐end. The question arises whether firms need a corporate marketing department, and if so, how...... it can best add value to the firm. Based on a qualitative study among B2B companies, we develop a conceptual framework highlighting the various parental roles through which corporate marketing can contribute to overall firm and business unit performance. In addition, we identify five gaps that restrain...... successful outcomes of corporate marketing activities. In sum, our framework provides important insights on how to successfully organize corporate marketing activities....

Stability of total nutrient admixtures with lipid injectable emulsions in glass versus plastic packaging.

Science.gov (United States)

Driscoll, David F; Silvestri, Anthony P; Bistrian, Bruce R; Mikrut, Bernard A

2007-02-15

The physical stability of two emulsions compounded as part of a total nutrient admixture (TNA) was studied in lipids packaged in either glass or plastic containers. Five weight-based adult TNA formulations that were designed to meet the full nutritional needs of adults with body weights between 40 and 80 kg were studied. Triplicate preparations of each TNA were assessed over 30 hours at room temperature by applying currently proposed United States Pharmacopeia (USP) criteria for mean droplet diameter, large-diameter tail, and globule-size distribution (GSD) for lipid injectable emulsions. In accordance with conditions set forth in USP chapter 729, the higher levels of volume-weighted percent of fat exceeding 5 microm (PFAT(5)) should not exceed 0.05% of the total lipid concentration. Significant differences were noted among TNA admixtures based on whether the lipid emulsion product was manufactured in glass or plastic. The plastic-contained TNAs failed the proposed USP methods for large-diameter fat globules in all formulations from the outset, and 60% had significant growth in large-diameter fat globules over time. In contrast, glass-contained TNAs were stable throughout and in all cases would have passed proposed USP limits. Certain lipid injectable emulsions packaged in plastic containers have baseline abnormal GSD profiles compared with those packaged in glass containers. When used to compound TNAs, the abnormal profile worsens and produces less stable TNAs than those compounded with lipid injectable emulsions packaged in glass containers.

International policies to reduce plastic marine pollution from single-use plastics (plastic bags and microbeads): A review.

Science.gov (United States)

Xanthos, Dirk; Walker, Tony R

2017-05-15

Marine plastic pollution has been a growing concern for decades. Single-use plastics (plastic bags and microbeads) are a significant source of this pollution. Although research outlining environmental, social, and economic impacts of marine plastic pollution is growing, few studies have examined policy and legislative tools to reduce plastic pollution, particularly single-use plastics (plastic bags and microbeads). This paper reviews current international market-based strategies and policies to reduce plastic bags and microbeads. While policies to reduce microbeads began in 2014, interventions for plastic bags began much earlier in 1991. However, few studies have documented or measured the effectiveness of these reduction strategies. Recommendations to further reduce single-use plastic marine pollution include: (i) research to evaluate effectiveness of bans and levies to ensure policies are having positive impacts on marine environments; and (ii) education and outreach to reduce consumption of plastic bags and microbeads at source. Copyright © 2017 Elsevier Ltd. All rights reserved.

Global business management for sustainability and competitiveness: The role of corporate branding, corporate identity and corporate reputation

OpenAIRE

Gupta, Suraksha; Melewar, T.C.; Czinkota, Michael C.

2013-01-01

This special issue of the Journal of World Business is devoted to the role of intangibles of a firm in building sustainable business for success in competitive markets. The research articles included in this issue have contributed to the on-going academic knowledge about the ability of marketing and management practices to drive business sustainability. This special issue on business sustainabili- ty focuses on the role of corporate branding, corporate identity and corporate reputation.

Container corporation: The financial, management, and operating implications of a universal beverage container recovery system: Executive summary

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

This report contains an overview of the system. It discusses containers and container materials, elements of the system, and the container recovery cost structure. It includes a financial evaluation and addresses issues of implementation.

Corporate Social Responsibility and Corporate Social Innovation: A Conceptual Understanding

Directory of Open Access Journals (Sweden)

Jali Muhamad Nizam

2017-01-01

Full Text Available In decades, various organizations worldwide engaged with Corporate Social Responsibility (CSR in order to show their corporate commitments and responsibilities towards societies at large. These commitments and responsibilities are coming from monetary and non-monetary resources for example cash, equipment’s and human resources whom are used for social purposes and activities that leads to a betterment of society and also to improved organization reputation. However, in today’s knowledge and innovation led economy, organizations can no longer affords to get involve in charity and community services merely to fulfil social return without having any sort of economic payoffs. This situation warrants organizations moving beyond CSR to Corporate Social Innovation. This paper explores conceptual understanding between CSR and Corporate Social Innovation. CSR is a traditional philanthropy and old paradigm which is somewhat no longer sufficient in coping with current economic situation. Hence, this paper provides an insight and suggests that corporate social innovation as an emergence new paradigm that perhaps could provide a comprehensive representation in the era of knowledge and innovation led economy that will leads to real change in improving the well-being of people’s life, enhance economic and technological growth. Furthermore, this paper also highlighted knowledge resource is the most significant resource of Corporate Social Innovation.

Physicochemical stability of carfilzomib (Kyprolis®) containing solutions in glass vials, ready-to-administer plastic syringes and infusion bags over a 28-day storage period.

Science.gov (United States)

Kim, Sun Hee; Krämer, Irene

2017-01-01

Centralized aseptic preparation of ready-to-administer carfilzomib containing parenteral solutions in plastic syringes and polyolefine (PO) infusion bags needs profound knowledge about the physicochemical stability in order to determine the beyond-use-date of the preparations. Therefore, the purpose of this study was to determine the physicochemical stability of carfilzomib solution marketed as Kyprolis® powder for solution for infusion. Reconstituted solutions and ready-to-administer preparations of Kyprolis® stored under refrigeration (2-8℃) or at room temperature (25℃) were analyzed at predetermined intervals over a maximum storage period of 28 days. Chemical stability of carfilzomib was planned to be determined with a stability-indicating reversed-phase high-performance liquid chromatography assay. Physicochemical stability was planned to be determined by visual inspection of clarity and color as well as pH measurement. The study results show that reconstituted carfilzomib containing parenteral solutions are stable in glass vials as well as diluted solutions in plastic syringes and PO infusion bags over a period of at least 28 days when stored light protected under refrigeration. When stored at room temperature, reconstituted and diluted carfilzomib solutions are physicochemically stable over 14 days and 10 days, respectively. The physicochemical stability of carfilzomib infusion solutions allows cost-saving pharmacy-based centralized preparation of ready-to-administer preparations.

78 FR 65313 - Actavis, Inc. a corporation, and Warner Chilott PLC; Analysis of Agreement Containing Consent...

Science.gov (United States)

2013-10-31

... FEDERAL TRADE COMMISSION [File No. 131 0152] Actavis, Inc. a corporation, and Warner Chilott PLC... https://ftcpublic.commentworks.com/ftc/actaviswarnerconsent following the instructions on the web-based....com/ftc/actaviswarnerconsent by following the instructions on the web-based form. If this Notice...

INTEGRATED CORPORATE STRATEGY MODEL

Directory of Open Access Journals (Sweden)

CATALINA SORIANA SITNIKOV

2014-02-01

Full Text Available Corporations are at present operating in demanding and highly unsure periods, facing a mixture of increased macroeconomic need, competitive and capital market dangers, and in many cases, the prospect for significant technical and regulative gap. Throughout these demanding and highly unsure times, the corporations must pay particular attention to corporate strategy. In present times, corporate strategy must be perceived and used as a function of various fields, covers, and characters as well as a highly interactive system. For the corporation's strategy to become a competitive advantage is necessary to understand and also to integrate it in a holistic model to ensure sustainable progress of corporation activities under the optimum conditions of profitability. The model proposed in this paper is aimed at integrating the two strategic models, Hoshin Kanri and Integrated Strategy Model, as well as their consolidation with the principles of sound corporate governance set out by the OECD.

Corporations as social contractors : a study on corporate social responsibility

OpenAIRE

Kalstad, Marius Aas

2007-01-01

This thesis takes up the issue of the role of business in today s society, in the form of Corporate Social Responsibility (CSR). The research question is: Do corporations/does business have responsibilities beyond maximising profit for owners? Social contract theory, as presented by Hobbes and Locke, is used to morally justify a corporate responsibility that goes beyond the traditional business responsibility of maximising profit for stolckholders. Further, the stakeholder model is proscribed...

Corporate environmental responsibility – a key determinant of corporate reputation

OpenAIRE

Cristina Ganescu; Laura Dindire

2014-01-01

This paper aims to determine the trend of the relationship between corporate environmental responsibility and corporate reputation by focusing on a study of the European automotive sector. The starting point of our research is content analysis of the sustainability or social responsibility reports published in 2010, 2011, and 2012 by 13 businesses operating in the European automotive industry. Content analysis was carried out in order to identify the indicators used to assess corporate enviro...

Migration of toxicants from plastics into drinking water during storage ...

African Journals Online (AJOL)

In this study, migration of toxicants, such as, manufacturing additives and previously adsorbed materials into drinking water stored inside plastic containers was investigated. The study considered virgin containers as well as those previously used to store sulphuric acid, calcium hypochlorite, methyl ethyl ketone (MEK) and ...

Removal of brominated flame retardant from electrical and electronic waste plastic by solvothermal technique

Energy Technology Data Exchange (ETDEWEB)

Zhang, Cong-Cong [Research Center For Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China); Zhang, Fu-Shen, E-mail: fszhang@rcees.ac.cn [Research Center For Eco-Environmental Sciences, Chinese Academy of Sciences, 18 Shuangqing Road, Beijing 100085 (China)

2012-06-30

Highlights: Black-Right-Pointing-Pointer A process for brominated flame retardants (BFRs) removal in plastic was established. Black-Right-Pointing-Pointer The plastic became bromine-free with the structure maintained after this treatment. Black-Right-Pointing-Pointer BFRs transferred into alcohol solvent were easily debrominated by metallic copper. - Abstract: Brominated flame retardants (BFRs) in electrical and electronic (E and E) waste plastic are toxic, bioaccumulative and recalcitrant. In the present study, tetrabromobisphenol A (TBBPA) contained in this type of plastic was tentatively subjected to solvothermal treatment so as to obtain bromine-free plastic. Methanol, ethanol and isopropanol were examined as solvents for solvothermal treatment and it was found that methanol was the optimal solvent for TBBPA removal. The optimum temperature, time and liquid to solid ratio for solvothermal treatment to remove TBBPA were 90 Degree-Sign C, 2 h and 15:1, respectively. After the treatment with various alcohol solvents, it was found that TBBPA was finally transferred into the solvents and bromine in the extract was debrominated catalyzed by metallic copper. Bisphenol A and cuprous bromide were the main products after debromination. The morphology and FTIR properties of the plastic were generally unchanged after the solvothermal treatment indicating that the structure of the plastic maintained after the process. This work provides a clean and applicable process for BFRs-containing plastic disposal.

Leaching of plastic polymers by plastic vials used for storing homoeopathic medicines: A preliminary study

Directory of Open Access Journals (Sweden)

Neeraj Gupta

2014-01-01

Full Text Available Background: In Homoeopathy, plastic containers/vials are used for the storing/dispensing of ethanol-based medicines instead of glass. Various studies have suggested that plastic components that leach out in stored substances tend to cause contamination and may produce adverse effects in living systems. The present study was aimed to find out chemical composition and leaching behaviour of commonly used plastic vials (PVs if any during the storage of ethanol-based homoeopathic medicines in optimal environment. Material and Methods: The experiments were conducted on two sample sets of PVs. Chemical properties of PV were assessed by Fourier Transform Infrared Attenuated Total Reflectance (FTIR-ATR spectroscopy. PV were cut separately [sample-1 (S-1 and sample-2 (S-2] and immersed in Homoeopathic Grade Ethanol (HGE in conical flask and stored for 7 days at ambient temperature (25° ± 5C with constant rotary shaking. After 7 days, S-1 and S-2 of PV in Homoeopathic Grade Ethanol (HGE were decanted and filtered. Aliquots (A1 and A2 were analysed by proton nuclear magnetic resonance spectroscopy (H 1 NMR. The spectral graph obtained by FTIR-ATR spectroscopy for PV compositions and spectral graph obtained by H 1 NMR spectroscopy for PV ethanol aliquots were examined for PVs material and PV leaching effect in HGE. Results: FTIR-ATR spectra showed that PV are made up of two types of polyolefin′s compounds i.e. Low Density Polyethylene (LDPE and Linear Low Density Polyethylene (LLDPE. Aliquots of PV in HGE showed the presence benzophenone and its methyl derivative, heat and light stabiliser (2, 2, 6, 6-tetramethylpiperidine and amino derivative, antioxidant (4, 4′- thiobis and 2-tertbutyl-5-methylphenol and plasticizer bis 2-Diethylhexyl phthalate (DEHP or Dioctyl phthalate (DOP. Results of study suggest that PVs leach out plastic polymers in HGE. Conclusion: This preliminary experiment suggests that it is not safe to use LDPE/LLDPE plastic for storing

Bisphenol A in culture media and plastic consumables used for ART.

Science.gov (United States)

Gatimel, N; Lacroix, M Z; Chanthavisouk, S; Picard-Hagen, N; Gayrard, V; Parinaud, J; Léandri, R D

2016-07-01

Do the embryo culture media and plastic materials used during assisted reproductive technology (ART) laboratory procedures expose embryos to bisphenol A (BPA)? BPA was not detected in embryo culture media or protein supplements at concentrations above those encountered in normal patient serum and follicular fluids. BPA is strongly suspected of altering the epigenome during mammalian development. Medical devices have been shown to be a source of BPA exposure in adult and neonatal intensive care units. An analytical study of ART culture media and plastic labware products was performed under conditions close to routine practice and if BPA was detected, tests were carried out under more stringent conditions. Two single-step embryo culture media, two sequential media and three different protein supplements [a purified human serum albumin (HSA), a synthetic serum substitute, and a recombinant HSA] were tested for BPA. Thirty-three different plastic consumables, used from oocyte collection through to embryo transfer, were tested for their ability to leach BPA into their surrounding environment.BPA concentrations were measured according to a previously described liquid chromatography/mass spectrometry method. This method is linear over the calibration range from 0.5 to 100 ng/ml using a linear model weighted by 1/X² and validated in terms of selectivity, linearity, repeatability, reproducibility and limit of quantification (0.5 ng/ml). Neither the culture media nor the protein supplements were shown to contain detectable levels of BPA. None of the plastic materials leached BPA into the surrounding medium at levels higher than the upper limit detected previously in serum and follicular fluids in women (about 2 ng/ml). However, the plastic of the three tested strippers used for oocyte denudation/embryo handling did contain BPA. Two of these strippers are made with polycarbonate, a plastic whose synthesis is known to require BPA. This study is limited to the ART media and

Corporate governance and corporate social responsibility: A typology of OECD countries

Directory of Open Access Journals (Sweden)

Patricia Crifo

2016-06-01

Full Text Available This article investigates the relationships between corporate governance and Corporate Social Responsibility (CSR. The underlying intuition is that governance factors are major determinants of CSR policies and extra-financial performance. More precisely, we identify three main factors that determine the strength of CSR engagement at the firm level: the structure of equity ownership (identity of shareholders, the composition and structure of board of directors, and the regulatory framework on corporate governance and CSR. We show how evolutions regarding corporate governance over the three previous decades have paved the way and shaped the rise of CSR. In addition, we elaborate a typology of CSR and governance structures that characterize OECD countries depending on whether the CSR reporting regime is stringent versus non-stringent, and on whether the corporate governance model is based on the shareholder, stakeholder or hybrid regime.

CORPORATE SOCIAL RESPONSIBILITY. EXAMPLE ROSIA MONTANA GOLD CORPORATION

OpenAIRE

Vasile Burja; Silvia – Stefania Mihalache

2010-01-01

Corporate Social Responsibility, a concept without a world accepted definition is starting to beused in Romania as well. This is the reason why in the present article we try to make a theoreticaldescription of the present concept and to exemplify it by presenting the responsible activities of acorporation in Romania, Rosia Montana Gold Corporation.

Corporate Governance

Directory of Open Access Journals (Sweden)

Dragoș-Mihail Daghie

2011-05-01

Full Text Available The purpose of this study is to analyze and understand the recently introduced form of managementof a company limited by shares. The Law no. 441/2006, which fundamentally amended Company Law,created this form of controlling the company, the corporate governance, but the legislation does not explicitlydefine what it wants to achieve through this instrument. This topic is recent in research as the theme ofgerman-roman commercial law systems (in French corporate governance system was introduced in 1966 andin Romania in 2006 but in terms of Anglo-Saxon law, the topic has been addressed years since 1776 (AdamSmith: The Wealth of Nations The concept of corporate governance would like, as a result, to establish somerules that companies must comply in order to achieve effective governance, transparent and beneficial forboth shareholders and for the minority. Corporate governance is a key element with an aim at improvingefficiency and economic growth in full accordance with the increase of investors’ confidence. Corporategovernance assumes a series of relationship between the company management, leadership, shareholders andthe other people concerned. Also corporate governance provides for that structure by means of which thecompany’s targets are set out and the means to achieve them and also the manner how to monitor such.

Corporate Governance Country Assessment : Malaysia

OpenAIRE

World Bank

2012-01-01

This report assesses Ghana s corporate governance policy framework. It highlights recent improvements in corporate governance regulation, makes policy recommendations, and provides investors with a benchmark against which to measure corporate governance in Ghana. It is an update of the 2005 Corporate Governance ROSC. Good corporate governance enhances investor trust, helps to protects mino...

The conversion of waste plastics/petroleum residue mixtures to transportation fuels

International Nuclear Information System (INIS)

Ali, M.F.; Siddiqui, M.N.

2005-01-01

Plastics have become the material of choice in the modern world and its applications in the industrial field are continually increasing. Presently the plastics are manufactured for various uses such as: consumer packaging, wires, pipes, containers, bottles, appliances, electrical/electronic parts, computers and automotive parts. Most of he post consumer, plastic products are discarded and end up as mixed plastic municipal waste. The disposal of his waste has become a major social concern. Mixed plastic waste (MPW) recycling is still very much in its infancy. Approximately 20 million tons of plastic waste is generated in the United States of America, while about 15 million tons is generated throughout the Europe. With existing recycle efforts, only 7% of the MPW are recycled to produce low-grade plastic products such as plastic sacks, pipes, plastic fencing, and garden furniture. The current plastic reclamation technology options are generally grouped into the following four types: (i) Primary: The processing of plastic for use comparable to the original application. (ii) Secondary: The processing of plastics waste into new products with a lower quality level. (iii) Tertiary: The chemical or thermal processing of plastic waste to their basic hydrocarbon feedstock. The resulting raw materials are then reprocessed into plastic material or other products of the oil refining process. (iv) Quaternary: The incineration of plastics waste to recover energy. This paper deals exclusively with tertiary recycling by pyrolysis and catalytic cracking of plastics waste alone and by coprocessing with petroleum residue or heavy oils to fuels and petrochemical feedstock for further processing in existing refinery and petrochemical units. (author)

The Significance of the 2014 Corporate Governance Code of the Bank of Russia

Directory of Open Access Journals (Sweden)

Anna Vladislavovna Shashkova

2014-01-01

Full Text Available The present article focuses on corporate governance in Russia, as well as on the approval in 2014 of the Code of Corporate Governance by the Bank of Russia and by the Russian Government. The article also provides the concept of the famous foreign term Compliance. Compliance is a system based on binding rules of conduct contained in the regulations which are mandatory for the company. In order to fulfill best practices and implement local acts on the most important issues for the company, many foreign companies as well as large Russian companies have formed special Compliance departments. Taking into account such international experience and international corporate governance principles the Bank of Russia has elaborated the Corporate Governance Code, approved by the Russian Government in February 2014. Corporate Governance Code regulates a number of the most important issues of corporate governance such as shareholders'rights and fair treatment of shareholders; Board of Directors; Corporate Secretary of the Company; system of remuneration of members of the Board of Directors, executive bodies and other key executives of the company; system of risk management and internal control; disclosure of information about the company, the information policy of the company; major corporate actions. The most important issue which is analyzed by the author is the problem of the composition of the Board of Directors: the presence of independent directors in the company. According to the author the new Corporate Governance Code reflects the latest trends as well as the current situation with corporate governance in Russia today.

Studies of Plasticized-Polymer Electrolytes Containing Mixed Zn(II) and Li(I)

Science.gov (United States)

1992-06-12

iIIIII1iIIII!I 14. SUBJECT TERMS 15. tdUMnnrri . 9 poly(ethylene glycol) ( PEG ), poly(ethylene glycol dimethyl ether) (PEGDME), 16. PRICE CODE...glycol) ( PEG ) and poly(ethylene glycol dimethyl ether) (PEGDME). The addition of salts to either PEO or plasticized-PEO strongly influences the...were found to depend on salt concentration. Td varied from 385 to 3350 C as the zinc content was increased from 0 to 100%. Thus the overall thermal

Energy information data base. Corporate author entries, June 1978--June 1979

International Nuclear Information System (INIS)

1979-06-01

This supplement contains additions to TID-4585-R1 (the authority list for corporate author names used by TIC), and is intended for use with that publication. Supplements are cumulative from June 1978 until another revision is issued

High prevalence of parental delivery of plastic debris in Cory’s shearwaters (Calonectris diomedea)

OpenAIRE

Rodríguez, Airam; Rodríguez, Beneharo; Carrasco, María Nazaret

2012-01-01

Plastic ingestion by adult Procellariiformes has been widely recorded, but few studies have evaluated intergenerational transfer. We assessed the prevalence of plastic particles, as well as their basic character- istics, in the gut content of dead Cory’s shearwater fledglings stranded by light pollution on Canary Islands. Eighty-three percent of birds were affected, containing on average 8.0 plastic pieces per bird. The average plastic weight per bird was low (2.97 ± 3.97 mg) compared with ...

The Essential Elements of Corporate Law. What is Corporate Law?

OpenAIRE

Armour, John; Hansmann, Henry; Kraakman, Reinier

2017-01-01

This article is the first chapter of the second edition of “The Anatomy of Corporate Law: A Comparative and Functional Approach”, by Reinier Kraakman, John Armour, Paul Davies, Luca Enriques, Henry Hansmann, Gerard Hertig, Klaus Hopt, HidekiKanda and Edward Rock (Oxford University Press, 2009). The book as a whole provides a functional analysis of Corporate (or Company) Law in Europe, the U.S., and Japan. Its organization reflects the structure of Corporate Law throughout all jurisdictions, w...

Does Corporate Social Responsibility Shape the Relationship between Corporate Governance and Financial Performance?

Directory of Open Access Journals (Sweden)

Jaja Suteja

2017-12-01

Full Text Available The correlation between theoretical and empirical of corporate governance (CG and corporate financial performance (CFP is not there without controversy. This paper aims to determine the moderating effects of corporate social responsibility (CSR, on the relationship between corporate governance and corporate financial performance. The sample of this research are banking companies that are listed on Indonesia Stock Exchange between the period of 2010-2014, taken by using purposive sampling method. Moderated Regression Analysis (MRA analysis was used in this study. The results of this study indicate that corporate governance affects the company's financial performance positively. Aspects of corporate governance such as audit committees and number of board meetings have a positive relationship with financial performance, but there is no relationship from the aspect of independent board of commissioners. Furthermore, CSR can only strengthen the positive relationship between the number of board of commissioners’ meetings and the financial performance of the company. The frequency intensity of board of commissioners’ meetings can increasingly address corporate governance reforms by improving and realizing social responsibility as part of sustainability innovation by optimizing media and CSR reporting methods.

Revisiting the Complexities of Corporate Branding

DEFF Research Database (Denmark)

Gyrd-Jones, Richard; Merrilees, Bill; Miller, Dale

2013-01-01

The evolution of corporate branding literature since the seminal paper by Balmer is evaluated. The literature exhibits signs of maturing, which is evidenced by multiple theoretical underpinnings and a widening scope. Four themes are identified: (i) corporate brand as differentiation; (ii) corporate...... brand as corporate communication; (iii) corporate brand as a values-based approach; and (iv) corporate brand as internal branding approaches. We give special attention to issues of corporate communication, corporate identity, corporate vision, multiple stakeholders, alignment, multiple voices, corporate...... values and organisational culture. The themes are examined through a ‘paradox’ lens. Each theme is discussed in terms of the theoretical challenges arising from complexities in that aspect of corporate branding, ensuing apparent paradoxes and possible solutions for each paradox. The paradoxes...

The Impact of Corporate Board Meetings on Corporate Performance ...

African Journals Online (AJOL)

Our findings suggest a statistically significant and positive association between the frequency of corporate board meetings and corporate performance, implying that SA boards that meet more frequently tend to generate higher financial performance. A further investigation indicates a significant non-monotonic link between ...

Corporate Schooling Meets Corporate Media: Standards, Testing, and Technophilia

Science.gov (United States)

Saltman, Kenneth J.

2016-01-01

Educational publishing corporations and media corporations in the United States have been converging, especially through the promotion of standardization, testing, and for-profit educational technologies. Media and technology companies--including News Corp, Apple, and Microsoft--have significantly expanded their presence in public schools to sell…

Challenges and Alternatives to Plastics Recycling in the Automotive Sector

Directory of Open Access Journals (Sweden)

Lindsay Miller

2014-08-01

Full Text Available Plastics are increasingly a preferred material choice in designing and developing complex, consumer products, such as automobiles, because they are mouldable, lightweight, and are often perceived to be highly recyclable materials. However, actually recycling the heterogeneous plastics used in such durable items is challenging, and presents very different scenarios to how simple products, such as water bottles, are recovered via curbside or container recycling initiatives. While the technology exists to recycle plastics, their feasibility to do so from high level consumer or industrial applications is bounded by technological and economical restraints. Obstacles include the lack of market for recyclates, and the lack of cost efficient recovery infrastructures or processes. Furthermore, there is a knowledge gap between manufacturers, consumers, and end-of-life facility operators. For these reasons, end-of-life plastics are more likely to end up down-cycled, or as shredder residue and then landfilled. This paper reviews these challenges and several alternatives to recycling plastics in order to broaden the mindset surrounding plastics recycling to improve their sustainability. The paper focuses on the automotive sector for examples, but discussion can be applied to a wide range of plastic components from similarly complex products.

Challenges and Alternatives to Plastics Recycling in the Automotive Sector

Science.gov (United States)

Miller, Lindsay; Soulliere, Katie; Sawyer-Beaulieu, Susan; Tseng, Simon; Tam, Edwin

2014-01-01

Plastics are increasingly a preferred material choice in designing and developing complex, consumer products, such as automobiles, because they are mouldable, lightweight, and are often perceived to be highly recyclable materials. However, actually recycling the heterogeneous plastics used in such durable items is challenging, and presents very different scenarios to how simple products, such as water bottles, are recovered via curbside or container recycling initiatives. While the technology exists to recycle plastics, their feasibility to do so from high level consumer or industrial applications is bounded by technological and economical restraints. Obstacles include the lack of market for recyclates, and the lack of cost efficient recovery infrastructures or processes. Furthermore, there is a knowledge gap between manufacturers, consumers, and end-of-life facility operators. For these reasons, end-of-life plastics are more likely to end up down-cycled, or as shredder residue and then landfilled. This paper reviews these challenges and several alternatives to recycling plastics in order to broaden the mindset surrounding plastics recycling to improve their sustainability. The paper focuses on the automotive sector for examples, but discussion can be applied to a wide range of plastic components from similarly complex products. PMID:28788167

Transnational Corporations and Corporate Citizenship: Analyzing New Roles of Organization Development Practitioners

Science.gov (United States)

Stolz, Ingo Stephan

2012-01-01

Research shows that too few transnational corporations (TNCs) have the organizational capacity to manage corporate citizenship. Evidence exists that ever more TNCs adopt programs of corporate citizenship development in order to increase this capacity. However, both in academic and practical literature, there is a general lack of a strategic…

12 CFR 561.15 - Corporation.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Corporation. 561.15 Section 561.15 Banks and... SAVINGS ASSOCIATIONS § 561.15 Corporation. The terms Corporation and FDIC mean the Federal Deposit Insurance Corporation. ...

75 FR 39017 - Pilot Corporation, Propeller Corp., and Flying J Inc.; Analysis of Proposed Agreement Containing...

Science.gov (United States)

2010-07-07

... for assuring that the firewall protocols are met. B. Continued Operation of Restaurants The Order also provides for the continuity of operation at Wendy's restaurants affiliated with the sites acquired by Love... privately held, for-profit corporation, is a fully integrated oil company with operations throughout the...

12 CFR 583.8 - Corporation.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Corporation. 583.8 Section 583.8 Banks and... SAVINGS AND LOAN HOLDING COMPANIES § 583.8 Corporation. The term Corporation means the Federal Deposit Insurance Corporation. ...

Micro-plastic ingestion by waterbirds from contaminated wetlands in South Africa.

Science.gov (United States)

Reynolds, Chevonne; Ryan, Peter G

2018-01-01

Despite a large literature on the impacts of micro-plastic pollution in marine ecosystems, very little research has focused on these pollutants in freshwater ecosystems. Recently, however, a few studies have demonstrated that micro-plastic pollutants are ingested by freshwater taxa, including birds. To explore this potential environmental threat in African freshwater systems we quantified micro-plastic pollutants in the faeces and feather brushings of seven southern African duck species. We analysed 283 faecal samples and 408 feather brushings, and found that 5% of faecal samples and 10% of feather samples contained micro-plastic fibres. The presence and abundance of micro-fibres differed between sampling sites, with significantly higher amounts recorded for the site that received effluent from a sewage treatment facility. Additionally, micro-fibre presence differed across duck species, indicating that foraging behaviour affects plastic ingestion. Our study confirms that African freshwater ecosystems and the biodiversity they support are under threat from micro-plastic contamination. Copyright © 2017 Elsevier Ltd. All rights reserved.

Corporal punishment.

Science.gov (United States)

Bauman, L J; Friedman, S B

1998-04-01

Pediatricians differ on the optimal ways to discipline children. The major controversy surrounds the use of corporal punishment. In an effort to resolve this controversy, the American Academy of Pediatrics (AAP) cosponsored a conference entitled "The Short and Long-Term Consequences of Corporal Punishment" in February 1996. This article reviews scientific literature on corporal punishment and summarizes the proceedings from the conference. The authors conclude that, although the research data are inadequate to resolve the controversy, there are areas of consensus. Practitioners should assess the spanking practices of the parent they see and counsel parents to avoid those that are, by AAP consensus, dangerous, ineffective, or abusive.

The appearance of plasticity on the blocks surfaces in geological media

Energy Technology Data Exchange (ETDEWEB)

Sibiryakov, Boris P., E-mail: sibiryakovbp@ipgg.sbras.ru [Trofimuk Institute of Oil and Gas Geology and Geophysics SB RAS, Novosibirsk, 630090, Russia and Novosibirsk State University, Novosibirsk, 630090 (Russian Federation)

2014-11-14

In present the elasticity and plasticity are absolutely different models of solids, which are not relate to each other. The experimental observations show, that the plasticity arrives and localizes on the surfaces of structures, which contain solid samples. The transition in special state, where a small part of solid volume is in plastic state, while the main part of volume is in elastic state not be describe by classical continuum Cauchy and Poisson model. This classical model requires two alternative states. Either is elastic state in the all volume or plastic one for all elementary volume too. However, the structured model of space gives us a possibility to describe this complicate state. In this paper shown that the sliding surfaces divided to each other by distances equal to the average sizes of microstructures, in the contrary of classical plasticity, where they have not characteristic distance. The energy of plastic transition is very small, because the main part of volume is elastic body. This description means the smooth transition from elasticity to plasticity in vicinity of sliding surfaces.

Corporate risk management : an overview

NARCIS (Netherlands)

Oosterhof, Casper M.

2001-01-01

Corporate risk management and hedging are important activities within financial as well as non-financial corporations. Under the assumptions of Modigliani and Miller [1958], corporate risk management is a redundant activity. However, the existence of market imperfections can explain the corporate

Preparation and properties of thermoplastic poly(caprolactone) composites containing high amount of esterified starch without plasticizer.

Science.gov (United States)

Sun, Yujie; Hu, Qiongen; Qian, Jiangtao; Li, Ting; Ma, Piming; Shi, Dongjian; Dong, Weifu; Chen, Mingqing

2016-03-30

Based on stearyl chloride and native starch, esterified starch were prepared and the chemical structure was characterized by (1)H NMR and FTIR. It was found that stearyl chloride was an efficient agent to fabricate esterified starch with high degree of substitution (DS). During the melt blending of esterified starch (80 wt%) and poly(caprolactone) (PCL, 20 wt%), it was shown the torque of PCL/esterified starch was much lower than that of PCL/native starch without any plasticizer, and further decreased with increasing DS. Compared with PCL/native starch, the tensile properties of PCL/esterified starch composites were significantly enhanced. The tensile strength and elongation at break were increased from 2.7 MPa to 56% for PCL/native starch composites to 9.1 MPa and 626% for PCL/esterified starch ones with DS of 1.50, respectively. SEM observation revealed the esterified starch particles in matrix became smaller and more uniform. In addition, the water resistance and hydrophobic character of PCL/esterified starch composites were improved. PCL composites containing 80 wt% esterified starch with favorable mechanical properties would have great potential applications in broad areas. Copyright © 2015 Elsevier Ltd. All rights reserved.

Corporate marketing: Apocalypse, advent and epiphany

OpenAIRE

Balmer, JMT

2009-01-01

Purpose - this paper aims to explain the nature and relevance of corporate marketing and details the antecedents of the territory. Corporate marketing is a marketing and management paradigm which synthesises practical and theoretical insights from corporate image and reputation, corporate identity, corporate communications and corporate branding, among other corporate-level constructs. Design/methodology/approach – via the adoption of a quadrivium; a traditional classical, four-part, app...

Optimization of wood plastic composite decks

Science.gov (United States)

Ravivarman, S.; Venkatesh, G. S.; Karmarkar, A.; Shivkumar N., D.; Abhilash R., M.

2018-04-01

Wood Plastic Composite (WPC) is a new class of natural fibre based composite material that contains plastic matrix reinforced with wood fibres or wood flour. In the present work, Wood Plastic Composite was prepared with 70-wt% of wood flour reinforced in polypropylene matrix. Mechanical characterization of the composite was done by carrying out laboratory tests such as tensile test and flexural test as per the American Society for Testing and Materials (ASTM) standards. Computer Aided Design (CAD) model of the laboratory test specimen (tensile test) was created and explicit finite element analysis was carried out on the finite element model in non-linear Explicit FE code LS - DYNA. The piecewise linear plasticity (MAT 24) material model was identified as a suitable model in LS-DYNA material library, describing the material behavior of the developed composite. The composite structures for decking application in construction industry were then optimized for cross sectional area and distance between two successive supports (span length) by carrying out various numerical experiments in LS-DYNA. The optimized WPC deck (Elliptical channel-2 E10) has 45% reduced weight than the baseline model (solid cross-section) considered in this study with the load carrying capacity meeting acceptance criterion (allowable deflection & stress) for outdoor decking application.

Plastic waste depolymerization as a source of energetic heating oils

Directory of Open Access Journals (Sweden)

Wołosiewicz-Głąb Marta

2017-01-01

Full Text Available In the past years there has been an increase in production and consumption of plastics, which are widely used in many areas of life. Waste generated from this material are a challenge for the whole of society, regardless of awareness of sustainable development and its technological progress. Still the method of disposal of plastic waste are focused mainly on their storage and incineration, not using energy contained there. In this paper technology for plastic waste depolymerization with characteristics of fuel oil resulting in the process, as an alternative to traditional energy carriers such as: coal, fine coal or coke used in households will be presented. Oil has a high calorific value and no doubt could replace traditional solutions which use conventional energy sources. Furthermore, the fuel resulting from this process is sulfur-free and chemically pure. The paper presents the installation for plastics waste depolymerization used in selected Polish Institute of Plastics Processing, along with the ability to use the main thermocatalytic transformation product.

Corporate Finance, Incomplete Contracts, and Corporate Control

OpenAIRE

Patrick Bolton

2014-01-01

This essay in celebration of Grossman and Hart (GH) (Grossman, S., and H. Oliver. 1986. "The Costs and Benefits of Ownership: A Theory of Vertical and Lateral Integration," 94 Journal of Political Economy 691–719.) discusses how the introduction of incomplete contracts has fundamentally changed economists’ perspectives on corporate finance and control. Before GH, the dominant theory in corporate finance was the tradeoff theory pitting the tax advantages of debt (relative to equity) against ba...

Corporate Risk Disclosure and Corporate Governance

Directory of Open Access Journals (Sweden)

Kaouthar Lajili

2009-12-01

Full Text Available To date, research which integrates corporate governance and risk management has been limited. Yet, risk exposure and management are increasingly becoming the core function of modern business enterprises in various sectors and industries domestically and globally. Risk identification and management are crucial in any business strategy design and implementation. From the investors’ point of view, knowledge of the risk profile, risk appetite and risk management are key elements in making sound portfolio investment decisions. This paper examines the relationships between corporate governance mechanisms and risk disclosure behavior using a sample of Canadian publicly-traded companies (TSX 230. Results show that Canadian public companies are more likely to disclose risk management information over and above the mandatory risk disclosures, if they are larger in size and if their boards of directors have more independent members. Minority voting control ownership structures appear to negatively impact risk disclosure and CEO incentive compensation shows mixed results. The paper concludes that more research is needed to further assess the impact of various governance mechanisms on corporate risk management and disclosure behavior.

Aluminum and Phthalates in Calcium Gluconate: Contribution From Glass and Plastic Packaging.

Science.gov (United States)

Yokel, Robert A; Unrine, Jason M

2017-01-01

Aluminum contamination of parenteral nutrition solutions has been documented for 3 decades. It can result in elevated blood, bone, and whole body aluminum levels associated with neurotoxicity, reduced bone mass and mineral content, and perhaps hepatotoxicity. The primary aluminum source among parenteral nutrition components is glass-packaged calcium gluconate, in which aluminum concentration in the past 3 decades has averaged approximately 4000 μg/L, compared with nutrition solutions; 2 packaged in glass (from France and the United States) and 1 in plastic (from Germany); in a recently released plastic-packaged solution (from the United States); and in the 2 glass containers. Phthalate concentration was determined in selected samples of each product and leachate of the plastic containers. The initial aluminum concentration was approximately 5000 μg/L in the 2 glass-packaged products and approximately 20 μg/L in the plastic-packaged product, and increased approximately 30%, 50%, and 100% in 2 years, respectively. The aluminum concentration in a recently released Calcium Gluconate Injection USP was approximately 320 μg/L. Phthalates were not detected in any calcium gluconate solutions or leachates. Plastic packaging greatly reduces the contribution of aluminum to parenteral nutrition solutions from calcium gluconate compared with the glass-packaged product.

Containment pressure analysis model using CONTEMPT-LT

International Nuclear Information System (INIS)

Gupta, R.N.

1975-09-01

An analytical model for evaluating the reactor containment pressure transient following a loss-of-coolant accident (LOCA) is presented. The model uses the CONTEMPT-LT computer program developed by Aerojet Nuclear Company. The sample problem studied is the containment response following the most severe postulated LOCA at the Yankee Rowe Nuclear Power Station. The results show good agreement with the response predicted by Westinghouse Electric Corporation. (auth)

THE SOUND OF CORPORATE GOVERNANCE

Directory of Open Access Journals (Sweden)

DUMITRASCU LUMINITA MIHAELA

2012-07-01

Full Text Available The paper explores the corporate governance and corporate social responsibility in music industry, by reviewing the literature and investigating the aspects in the context of a sample made by top companies in this domain. The paper spotlighting the mutual connections between corporate governance and corporate social responsibility. The research methodology used consists in investigate the corporate governance codes. It’s about a qualitative interpretive research methodology that was adopted. The findings suggest the intercorelation of corporate governance with corporate social responsibility. The main contribution of the author consists in the fact that the added value of this paper and the original contribution leads in the intercorelation of these two aspects of corporate governance and corporate social responsibility, the findings beeing interesting, implying that recent preoccupation with corporate governance in music industry is starting to be equable by some attention to social responsibility aspects, with growing appreciation of their interdependencies. Previous literature has researched corporate governance and corporate social responsibility independently. Due to this fact, this paper is considering them jointly. The paper is important for both practical and theoretical aspects: for managers and also can serve as the basis for future research on this topic. The current paper is realized in the doctoral program entitled “PhD in Economics at the Standards of European Knowledge- DoEsEc”, scientific coordinator Prof. PhD Niculae Feleaga, Institution: The Academy of Economic Studies Bucharest, Faculty of Accounting and Management Informatic System, Department of International Accounting, period of research 2009-2012.

CORPORATE BRANDING COWORKING PLACE IN BANDUNG (CORPORATE BRANDING COWORKING SPACE DI BANDUNG

Directory of Open Access Journals (Sweden)

Dewi Damayanti

2017-10-01

Full Text Available The title of this research is “Corporate Branding Coworking Space in Bandung” with the subtitle is “Descriptive Study of Corporate Branding Coworking Space in Bandung to Create Product Differentiation”. The high demand for economical workspace makes business coworking space growing. The growth happen in Bandung and make the level of competition coworking space in Bandung is quite high, especially with the uniformity of the product offered each coworking space. Seeing these growth, researchers interested in conducting research on how corporate branding coworking space in Bandung to create product differentiation.The purpose of this study is to discover how company create the vision, implemented vision to their corporate culture, and the compability between their vision and image of Bandung Digital Valley, Freenovation, and Ruang Reka that stakeholder created. The method used in this research is descriptive method with qualitative data and Hatch & Schultz’s concept of corporate branding. The data collection techniques used in interviews, observation, and documentation study.The result of this study indicate that Bandung Digital Valley, Freenovation, and Ruang Reka focus to introduce the company to their target market. Started from create the vision of the company by founder based on their experiences and business opportunity. Then, the application of corporate vision to corporate culture. Non of Bandung Digital Valley, Freenovation, or Ruang Reka implement the vision into corporate culture. Last, Bandung Digital Valley, Freenovation, and Ruang Reka think it is not a right time to create corporate image because they need to improve the quality of their facility first.   Keywords : corporate branding, product differentiation, Bandung Digital Valley, Freenovation, Ruang Reka Judul penelitian yang diangkat adalah “Corporate Branding Coworking Space di Bandung” dengan sub judul Studi Deskriptif mengenai Corporate Branding Coworking

75 FR 60138 - Consolidated Glass and Mirror Corporation, a Subsidiary of Guardian Industries Corporation, Galax...

Science.gov (United States)

2010-09-29

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,579] Consolidated Glass and Mirror Corporation, a Subsidiary of Guardian Industries Corporation, Galax, VA; Notice of Affirmative... Consolidated Glass and Mirror Corporation, a Subsidiary of Guardian Industries Corporation, Galax, Virginia...

76 FR 19472 - Consolidated Glass and Mirror Corporation, a Subsidiary of Guardian Industries Corporation, Galax...

Science.gov (United States)

2011-04-07

... Mirror Corporation, a Subsidiary of Guardian Industries Corporation, Galax, VA; Notice of Negative... and Mirror Corporation, a Subsidiary of Guardian Industries Corporation, Galax, Virginia (subject firm... firm, stated that the Galax, Virginia facility is owned by ``Guardian Industries, a [[Page 19473...

Selectivity of flesh-footed shearwaters for plastic colour: Evidence for differential provisioning in adults and fledglings.

Science.gov (United States)

Lavers, Jennifer L; Bond, Alexander L

2016-02-01

The ingestion of plastic by seabirds has been used as an indicator of population and ocean health. However, few studies have examined adults and juveniles of the same species concurrent with the availability of plastic in the local marine environment. In King George Sound (KGS), Western Australia, 13% of adult flesh-footed shearwaters (Ardenna carneipes) and 90% of fledglings contained plastic items in their digestive tract. On Lord Howe Island (LHI), New South Wales, 75% of adult shearwaters and 100% of fledglings contained plastic. Ingested items were assessed using Jaccard's Index (where J = 0 indicates complete dissimilarity and J = 1 complete similarity). The colour of items ingested by self- and chick-provisioning shearwaters from KGS exhibited broad overlap with plastic available in the local environment (J = 0.78-0.80), and plastic in adults and fledglings from LHI were less similar to those available (J = 0.31-0.58). Additional data on seabird colour selection would improve our understanding of the factors influencing the behaviour of ingesting plastic, and its contribution to the decline of some species. Copyright © 2015 Elsevier Ltd. All rights reserved.

Irradiated recycled plastic as a concrete additive for improved chemo-mechanical properties and lower carbon footprint.

Science.gov (United States)

Schaefer, Carolyn E; Kupwade-Patil, Kunal; Ortega, Michael; Soriano, Carmen; Büyüköztürk, Oral; White, Anne E; Short, Michael P

2018-01-01

Concrete production contributes heavily to greenhouse gas emissions, thus a need exists for the development of durable and sustainable concrete with a lower carbon footprint. This can be achieved when cement is partially replaced with another material, such as waste plastic, though normally with a tradeoff in compressive strength. This study discusses progress toward a high/medium strength concrete with a dense, cementitious matrix that contains an irradiated plastic additive, recovering the compressive strength while displacing concrete with waste materials to reduce greenhouse gas generation. Compressive strength tests showed that the addition of high dose (100kGy) irradiated plastic in multiple concretes resulted in increased compressive strength as compared to samples containing regular, non-irradiated plastic. This suggests that irradiating plastic at a high dose is a viable potential solution for regaining some of the strength that is lost when plastic is added to cement paste. X-ray Diffraction (XRD), Backscattered Electron Microscopy (BSE), and X-ray microtomography explain the mechanisms for strength retention when using irradiated plastic as a filler for cement paste. By partially replacing Portland cement with a recycled waste plastic, this design may have a potential to contribute to reduced carbon emissions when scaled to the level of mass concrete production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Corporate Involvement in C AI

Science.gov (United States)

Baker, Justine C.

1978-01-01

Historic perspective of computer manufacturers and their contribution to CAI. Corporate CAI products and services are mentioned, as is a forecast for educational involvement by computer corporations. A chart of major computer corporations shows gross sales, net earnings, products and services offered, and other corporate information. (RAO)

Corporate values of the 25 largest European banks : Exploring the ambiguous link with corporate scandals

NARCIS (Netherlands)

Ehrenhard, Michel L.; Fiorito, Timo L.

2018-01-01

Corporate value statements communicate what a firm aspires for and what drives their value creation. In addition, corporate values often also define which behaviors are acceptable and which are not. Ideally, corporate values are representations of a firm's informal corporate values and

Final LDRD report : advanced plastic scintillators for neutron detection.

Energy Technology Data Exchange (ETDEWEB)

Vance, Andrew L.; Mascarenhas, Nicholas; O' Bryan, Greg; Mrowka, Stanley

2010-09-01

This report summarizes the results of a one-year, feasibility-scale LDRD project that was conducted with the goal of developing new plastic scintillators capable of pulse shape discrimination (PSD) for neutron detection. Copolymers composed of matrix materials such as poly(methyl methacrylate) (PMMA) and blocks containing trans-stilbene (tSB) as the scintillator component were prepared and tested for gamma/neutron response. Block copolymer synthesis utilizing tSBMA proved unsuccessful so random copolymers containing up to 30% tSB were prepared. These copolymers were found to function as scintillators upon exposure to gamma radiation; however, they did not exhibit PSD when exposed to a neutron source. This project, while falling short of its ultimate goal, demonstrated the possible utility of single-component, undoped plastics as scintillators for applications that do not require PSD.

Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): a review.

Science.gov (United States)

Yang, Xiaoning; Sun, Lushi; Xiang, Jun; Hu, Song; Su, Sheng

2013-02-01

Plastics from waste electrical and electronic equipment (WEEE) have been an important environmental problem because these plastics commonly contain toxic halogenated flame retardants which may cause serious environmental pollution, especially the formation of carcinogenic substances polybrominated dibenzo dioxins/furans (PBDD/Fs), during treat process of these plastics. Pyrolysis has been proposed as a viable processing route for recycling the organic compounds in WEEE plastics into fuels and chemical feedstock. However, dehalogenation procedures are also necessary during treat process, because the oils collected in single pyrolysis process may contain numerous halogenated organic compounds, which would detrimentally impact the reuse of these pyrolysis oils. Currently, dehalogenation has become a significant topic in recycling of WEEE plastics by pyrolysis. In order to fulfill the better resource utilization of the WEEE plastics, the compositions, characteristics and dehalogenation methods during the pyrolysis recycling process of WEEE plastics were reviewed in this paper. Dehalogenation and the decomposition or pyrolysis of WEEE plastics can be carried out simultaneously or successively. It could be 'dehalogenating prior to pyrolysing plastics', 'performing dehalogenation and pyrolysis at the same time' or 'pyrolysing plastics first then upgrading pyrolysis oils'. The first strategy essentially is the two-stage pyrolysis with the release of halogen hydrides at low pyrolysis temperature region which is separate from the decomposition of polymer matrixes, thus obtaining halogenated free oil products. The second strategy is the most common method. Zeolite or other type of catalyst can be used in the pyrolysis process for removing organohalogens. The third strategy separate pyrolysis and dehalogenation of WEEE plastics, which can, to some degree, avoid the problem of oil value decline due to the use of catalyst, but obviously, this strategy may increase the cost of

Relationship between Corporate Governance and Information Security Governance Effectiveness in United States Corporations

Science.gov (United States)

Davis, Robert E.

2017-01-01

Cyber attackers targeting large corporations achieved a high perimeter penetration success rate during 2013, resulting in many corporations incurring financial losses. Corporate information technology leaders have a fiduciary responsibility to implement information security domain processes that effectually address the challenges for preventing…

Corporate social responsibility and corporate governance in Indonesian public listed companies

OpenAIRE

Ika Siti Rochmah; Dwiwinarno Titop; Widagdo Ari Kuncara

2017-01-01

This study aims to investigate whether theree has been a change in the level of corporate social responsibility (CSR) disclosure and to examine whether corporate governance attributes influence CSR disclosure in corporate annual report of Indonesian public listed companies(PLCs). The annual reports of 115 PLC for two years (2011 and 2012) were analysed using content analysis. Multiple regression analysis was utilized to determine factors influencing CSR disclosure in annual reports. Consisten...

77 FR 65543 - Energy Corporation of America; Eastern American Energy Corporation; First ECA Midstream LLC...

Science.gov (United States)

2012-10-29

... Corporation of America; Eastern American Energy Corporation; First ECA Midstream LLC; Notice of Application Take notice that on October 16, 2012, Energy Corporation of America and Eastern American Energy Corporation (collectively, ECA), and First ECA Midstream LLC (First ECA Midstream), 501 56th Street SE...

Exploring "Extreme" Physics with an Inexpensive Plastic Toy Popper

Science.gov (United States)

Lapp, David R.

2008-01-01

This article describes an activity that can be performed with an inexpensive plastic toy popper. The activity builds skill at analysing motion and results in the calculation of a surprisingly extreme acceleration. (Contains 1 figure.)

Development of in-situ radon sensor using plastic scintillator

International Nuclear Information System (INIS)

Shitashima, Kiminori

2009-01-01

Underwater in-situ radon measurement is important scientific priority for oceanography, especially for survey and monitoring of submarine groundwater discharge (SDG). The high sensitivity and lightweight underwater in-situ radon sensor using NaI(Tl) doped plastic scintillator was developed for application to SDG research. Because NaI(Tl) doped plastic scintillator contacts seawater directly, the plastic scintillator can expect high sensitivity in comparison with NaI(Tl) crystal sealed in a container. In order to improve condensation efficiency of scintillation, the plastic scintillator was processed in funnel form and coated by light-resistant paint. This sensor consists of plastic scintillator, photomultiplier tube, preamplifier unit, high-voltage power supply, data logger and lithium-ion battery, and all parts are stored in a pressure housing (200φx300L). The newly developed underwater in-situ radon sensor was tested at hydrothermal area (underwater hot springs) that the hydrothermal fluid containing high concentration of radon is discharged into seawater. The sensor was operated by a diver, and sensitivity tests and mapping survey for estimation of radon diffusion were carried out. The signals of the radon sensor ranged from 20 to 65 mV, and these signals corresponded with radon concentration of 2 to 12 becquerels per liter. The sensor was able to detect radon to 20 m above the hydrothermal point (seafloor). Since the sensor is small and light-weight, measurement, monitoring and mapping can perform automatically by installing the sensor to an AUV (autonomous underwater vehicle). Furthermore, underwater in-situ radon sensor is expected an application to earthquake prediction and volcanic activity monitoring as well as oceanography and hydrology. (author)

Information and Corporate Cultures.

Science.gov (United States)

Drake, Miriam A.

1984-01-01

This paper defines "corporate culture" (set of values and beliefs shared by people working in an organization which represents employees' collective judgments about future) and discusses importance of corporate culture, nature of corporate cultures in business and academia, and role of information in shaping present and future corporate…

Negative employee corporate brand identification: A case study of a prominent Malaysian University corporate brand

OpenAIRE

Syed alwi, SF; Balmer, JMT; CheHa, N; Yen, D

2014-01-01

The purpose of this paper is to investigate negative employee corporate brand identification towards a business school in Malaysia. The research marshals the nascent literature of corporate brand identification (Balmer and Liao 2007; Balmer, Liao and Wang 2008) which marked new ground by drawing on social identity theory in corporate branding contexts. Corporate brand identification is relatively new concept but has been recognized as very important facet of corporate marketing (Balmer and Li...

CORPORATE GOVERNANCE, OWNERSHIP STRUCTURE AND CORPORATE DIVERSIFICATION: EVIDENCE FROM THE MALAYSIAN LISTED COMPANIES

Directory of Open Access Journals (Sweden)

Ayoib Che Ahmad

2003-01-01

Full Text Available Previous research has contributed much to our understanding of the relationship between corporate diversification strategy and corporate governance quality. The majority of published works has been on sophisticated and mature markets in first world nations. This paper extends previous knowledge by examining this relationship in a developing country. Malaysia is a developing country that provides a rich setting for corporate governance research. The structure of the business environment and the availability of published data make it an interesting research site.The results showed that outside blockholding especially non-institutional blockholding was negatively associated with diversification. However, evidence of significant relationship between managerial ownership and diversification was not found although the directions were generally as expected. Similarly, good corporate governance was shown to reduce diversification activities. The variable for separate board structure was consistently significant in most of the estimations. However, the other measure of corporate governance namely the proportion of outside directors was not as significant as might be expected. The study opens the way for a richer understanding of the links between corporate governance, ownership structure and corporate diversification in a developing country.

Corporate Universities and Corporation- University Partnerships in Thailand: Complimenting Education in Learning, Leadership and Change

Directory of Open Access Journals (Sweden)

Oliver S. Crocco

2017-04-01

Full Text Available With an estimated workforce of 285 million and the establishment of the Association of Southeast Asian Nations (ASEAN Economic Community in 2015, ASEAN faces vast challenges in human resource development (HRD and higher education. These challenges in Thailand have resulted in the rise of corporate universities and corporation-university partnerships. Corporate partnerships in education adapt quickly to industry needs and are increasingly popular and complimentary to traditional higher education. This research looks at one corporate university and one corporation-university partnership to investigate how, if at all, corporate universities and partnerships address HRD issues such as adult learning, leadership development, organisational change, corporate social responsibility (CSR, as well as ethical and global issues. This research finds initial evidence that corporate educational strategies address a variety of HRD issues and have the potential to revolutionise and compliment higher education in Thailand in a way that drives the nation toward a more sustainable future.

Wolf Creek Generating Station containment model

International Nuclear Information System (INIS)

Nguyen, D.H.; Neises, G.J.; Howard, M.L.

1995-01-01

This paper presents a CONTEMPT-LT/28 containment model that has been developed by Wolf Creek Nuclear Operating Corporation (WCNOC) to predict containment pressure and temperature behavior during the postulated events at Wolf Creek Generating Station (WCGS). The model has been validated using data provided in the WCGS Updated Safety Analysis Report (USAR). CONTEMPT-LT/28 model has been used extensively at WCGS to support plant operations, and recently, to support its 4.5% thermal power uprate project

La práctica corporal y la imagen corporal: reconstruyendo significados

Directory of Open Access Journals (Sweden)

Angela Vaquero Barba

2014-01-01

Full Text Available Este trabajo presenta una experiencia, en el ámbito de la formación del profesorado, vinculada a la propia imagen corporal. Ha pretendido, tomando como eje la actividad corporal y motriz, tomar conciencia de cómo percibimos, sentimos y valoramos nuestro cuerpo; valorar la actividad motriz-corporal como herramienta para la construcción de nuevos significados; y capacitar al alumnado para reaprender la manera en que percibimos, sentimos y valoramos nuestro cuerpo. Los resultados apoyan la necesidad de capacitar al alumnado femenino para valorar su imagen corporal, la idoneidad de las prácticas corporales para impulsar procesos de reconstrucción y el interés de la escritura como herramienta que da forma a la reconstrucción.

Reduction experiment of iron scale by adding waste plastics.

Science.gov (United States)

Zhang, Chongmin; Chen, Shuwen; Miao, Xincheng; Yuan, Hao

2009-01-01

The special features of waste plastics in China are huge in total amount, various in type and dispersive in deposition. Therefore, it is necessary to try some new ways that are fit to Chinese situation for disposing waste plastics as metallurgical raw materials more effectively and flexibly. Owing to its high ferrous content and less impurity, the iron scale became ideal raw material to produce pure iron powder. One of the methods to produce pure iron powder is Hoganas Method, by which, after one or multistage of reduction steps, the iron scale can be reduced pure iron powder. However, combining utilization of waste plastics and iron powder production, a series of reduction experiments were arranged and investigated, which is hoped to take use of both thermal and chemical energy contained in waste plastics as well as to improve the reducing condition of iron scale, and hence to develop a new metallurgical way of disposing waste plastics. The results show that under these experimental conditions, the thermal-decomposition of water plastics can conduce to an increase of porosity in the reduction systems. Moreover, better thermodynamics and kinetics conditions for the reduction of scale can be reached. As a result, the reduction rate is increased.

CORPORATE GOVERNANCE IN MALAYSIA: THE EFFECT OF CORPORATE REFORMS AND STATE BUSINESS RELATION IN MALAYSIA

Directory of Open Access Journals (Sweden)

Nor Azizah Zainal Abidin

2007-01-01

Full Text Available The Asian Financial Crisis in 1997 not only introduced the term of corporate governance but also drew attention of the public about the weaknesses of Malaysian corporate governance practice. After 1998, Malaysian government decided to adopt corporate reform that could enhance the quality of good corporate management practice. Thisreform is clearly stated in the code and rules of corporate governance. The purpose of this research is to study the significance of implementing the code and rules of corporategovernance since the public already realize the close relationship between business and politics. Three companies were chosen as indicators for this study. As a result, it was found that companies which are involved in corporate malpractice but have goodrelationship with states will always be excluded from the legal corporate action.

Corporate strategy in turbulent environments: Key roles of the corporate level

OpenAIRE

Caldart, Adrian A.; Ricart, Joan E.

2006-01-01

This paper analyzes the evolution during the period 1986-2002 of the corporate strategy of Lujan, a highly successful car components manufacturer headquartered in Spain, as a way to explore how the corporate level influences the successful evolution of a company exposed to a "turbulent" environment over a long period. We find that the corporate level plays three key roles. First, it drives a firm's evolution by developing a cognitive representation of the firm's competitive landscape. Second,...

A calculational round robin in elastic-plastic fracture mechanics

International Nuclear Information System (INIS)

Larsson, L.H.

1983-01-01

Eighteen organisations participated in this elastic-plastic fracture mechanics (EPFM) numerical analysis round robin which treated the same three-point bend problem as a similar round robin conducted by ASTM four years earlier. The work involved the calculation of overall deformation, J, CTOD and crack profile using plane strain elastic-plastic finite element analysis for a monotonically increasing load up to a maximum deformation which was far beyond the elastic regime. It was found that all of the elastic solutions were accurate to within a few per cent. In the elastic-plastic regime, however, there was a large scatter of the results, increasing with increasing plastic deformation and roughly of the same order as in the ASTM round robin which contained ten solutions. No significant progress has taken place in the state of the art of numerical EPFM analysis over the four-year interval. The reasons for this scatter and tentative conclusions on the most suitable numerical analysis methods in EPFM are discussed. (author)

The radiation resistance of thermoset plastics: Pt. 2

International Nuclear Information System (INIS)

Gilfrich, H.-P.; Roesinger, S.; Wilski, H.

1991-01-01

Two thermoset phenolic plastics filled with organic fillers (wood flour and cotton fabric shreds) were irradiated at high dose rates (under exclusion of air) and with extremely low dose rates in air. The mechanical and electrical properties are compared with each other and with the results obtained from previous investigations involving inorganic filled thermosets. As expected, the organic filled plastics were found to be more sensitive to irradiation than the inorganic filled counterparts. Radiation induced changes previously observed with the inorganic filled thermosets can now be explained by the small amounts of organic admixtures which they contain. (author)

Corporate Innovation and Entrepreneurial Development | Iyayi ...

African Journals Online (AJOL)

This paper aimed at a theoretical exposition of the influence of corporate innovation on entrepreneurial development. To achieve this purpose a review of extant literature on innovation and creativity, concept of corporate innovation process of corporate innovation, approaches to corporate innovation, corporate innovation ...

CORPORATE GOVERNANCE IN MALAYSIA: THE EFFECT OF CORPORATE REFORMS AND STATE BUSINESS RELATION IN MALAYSIA

OpenAIRE

Nor Azizah Zainal Abidin; Halimah @ Nasibah Ahmad

2007-01-01

The Asian Financial Crisis in 1997 not only introduced the term of corporate governance but also drew attention of the public about the weaknesses of Malaysian corporate governance practice. After 1998, Malaysian government decided to adopt corporate reform that could enhance the quality of good corporate management practice. Thisreform is clearly stated in the code and rules of corporate governance. The purpose of this research is to study the significance of implementing the code and rules ...

Plastic Surgery

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Plastic Surgery KidsHealth / For Teens / Plastic Surgery What's in ... her forehead lightened with a laser? What Is Plastic Surgery? Just because the name includes the word " ...

Method of solidifying radioactive waste by plastics

International Nuclear Information System (INIS)

Yasumura, Keijiro; Tomita, Toshihide.

1976-01-01

Purpose: To prevent leakage of radioactivity by providing corrosion-resistant layer on the inner surface of a waste container for radioactive waste. Constitution: The inner periphery and bottom of a drum can is lined with an non-flammable cloth of such material as asbestos. This drum is filled with a radioactive waste in the form of powder or pellets. Then, a mixture of a liquid plastic monomer and a polymerization starting agent is poured at a normal temperature, and the surface is covered with a non-flammable cloth. The plastic monomer and radioactive waste are permitted to impregnate the non-flammable cloth and are solidified there. Thus, even if the drum can is corroded at the sea bottom after disposal it in the ocean, it is possible to prevent the waste from permeating into the outer sea water because of the presence of the plastic layer on the inside. Styrene is used as the monomer. (Aizawa, K.)

Possibilities of producing sundry wood-plastic articles by different methods

International Nuclear Information System (INIS)

Pesek, M.

1978-01-01

In making wood-plastic materials, i.e., the combination of wood and polymers, wood is impregnated by a polymerizable mixture; the incorporated mixture may be polymerized by ionizing radiation or by chemical initiation or by a combination of both. The advantages and drawbacks of the individual procedures are described. Examples are shown of the preparation of small wood-plastic articles, e.g., mosaic parquets, parts of music instruments, handles, etc., cured in a rotary curing container. (author)

From Corporate Social Responsibility to Corporate Sustainability: Features of Financing Sustainable Development

Directory of Open Access Journals (Sweden)

Vasylchuk Irуna P.

2018-03-01

Full Text Available The theoretical basis of the concepts of corporate social responsibility and sustainable development are studied. It is revealed that scientists mainly distinguish two main stages in the evolution of the concept of corporate social responsibility. There argued the expediency of singling out the third stage of the development of the concept (version CSR 2.0, which is characterized by the integration of the theoretical and practical foundations of the concepts of CSR and sustainable development as well as by their implementation into activities of corporations. The presence of the necessary prerequisites for singling out the new stage in the evolution of these concepts (version CSR 3.0, which is based on the provisions of the collaborative theory and provides for the cooperation of social enterprises and sustainable corporations in achieving the goals of sustainable development, is revealed, its expediency is justified. The determinant of the stage is the use of opportunities for sustainable development, the dominant is the social orientation, and its content is characterized by the slogan “doing common good to do common well”. Using generalization, there identified the features of the established models of sustainable development of corporations by key aspects (goals, principles, methods. On this basis, the features of approaches to financing sustainable development at the macro and micro levels are determined, and the principles for financing the activities of corporations in the new conditions are defined. It is concluded that achieving sustainability requires an effective system of financing corporate measures aimed at sustainable development, for the creation of which in Ukraine it is necessary to use the experience of “best practices” at the national, local and corporate levels.

PVC removal from mixed plastics by triboelectrostatic separation

International Nuclear Information System (INIS)

Park, Chul-Hyun; Jeon, Ho-Seok; Park, Jai-Koo

2007-01-01

Ever increasing oil price and the constant growth in generation of waste plastics stimulate a research on material separation for recycling of waste plastics. At present, most waste plastics cause serious environmental problems due to the disposal by reclamation and incineration. Particularly, polyvinyl chloride (PVC) materials among waste plastics generates hazardous HCl gas, dioxins containing Cl, and so on, which lead to air pollution and shorten the life of incinerator, and it makes difficultly recycling of other plastics. Therefore, we designed a bench scale triboelectrostatic separator for PVC removal from mixed plastics (polyvinyl chloride/polyethylene terephthalate), and then carried out material separation tests. In triboelectrostatic separation, PVC and PET particles are charged negatively and positively, respectively, due to the difference of the work function of plastics in tribo charger of the fluidized-bed, and are separated by means of splitter through an opposite electric field. In this study, the charge efficiency of PVC and PET was strongly dependent on the tribo charger material (polypropylene), relative humidity (below 30%), air velocity (over 10 m/s), and mixture ratio (PET:PVC = 1:1). At the optimum conditions (electrode potential of 20 kV and splitter position of -2 cm), PVC rejection and PET recovery in PET products were 99.60 and 98.10%, respectively, and the reproducibility of optimal test was very good (±1%). In addition, as a change of splitter position, we developed the technique to recover high purity PET (over 99.99%) although PET recovery decreases by degrees

Consumer exposure to Bisphenol A from plastic bottles

Science.gov (United States)

Bidabadi, Fatemeh

Bisphenol A (BPA) is a plastic monomer and plasticizer and is a chemical that has one of the highest volume production worldwide, with more than six billion pounds each year. Its' primary use is the production of polycarbonate plastics, epoxy resins used to line metal cans in a host of plastic consumer products such as toys, water pipes, drinking containers, eyeglass lenses, sports safety equipment as well as consumer electronics. Studies have shown that BPA is leached from lacquer coated cans and baby feeding bottles due to hydrolysis of the Polymer during thermal treatment. Studies have also shown that even under normal use BPA may leach from food and beverage containers. For many years Bisphenol A was treated as neutral to human health. The detection of BPA in drinking water and food products has raised the interest of many researches since 1990. Thousands of studies have examined the impact of BPA to determine its effects in laboratory animals. Numerous toxicological and biochemical studies have supported that BPA has estrogenic properties. The effects of exposure to BPA can be harmful to fetus, infants and young children. BPA is used in products where traces of it can be found in every human at higher levels of concentration than that which causes problems in animals. The National Institute for Environmental Health Sciences (NIEHS) has defined "low dose" of endocrine disrupting chemicals as doses below no observable adverse effect (NOAE) for specific chemicals. In BPA, this dose is 50 mg/kg of body weight per day. Today there are more than 150 published results describing how low doses of BPA effects animals. A recent study reported that adult female mice, monkeys, and humans metabolized BPA at almost identical rates. Since the level of BPA and other endocrine chemicals appears to be increasing throughout the World, especially where plastics are prevalent, it is extremely important to study the effects of this chemical on man and wildlife. This research effort

Caution on the storage of waters and aqueous solutions in plastic containers for hydrogen and oxygen stable isotope analysis.

Science.gov (United States)

Spangenberg, Jorge E

2012-11-30

The choice of containers for storage of aqueous samples between their collection, transport and water hydrogen ((2)H) and oxygen ((18)O) stable isotope analysis is a topic of concern for a wide range of fields in environmental, geological, biomedical, food, and forensic sciences. The transport and separation of water molecules during water vapor or liquid uptake by sorption or solution and the diffusive transport of water molecules through organic polymer material by permeation or pervaporation may entail an isotopic fractionation. An experiment was conducted to evaluate the extent of such fractionation. Sixteen bottle-like containers of eleven different organic polymers, including low and high density polyethylene (LDPE and HDPE), polypropylene (PP), polycarbonate (PC), polyethylene terephthalate (PET), and perfluoroalkoxy-Teflon (PFA), of different wall thickness and size were completely filled with the same mineral water and stored for 659 days under the same conditions of temperature and humidity. Particular care was exercised to keep the bottles tightly closed and prevent loss of water vapor through the seals. Changes of up to +5‰ for δ(2)H values and +2.0‰ for δ(18)O values were measured for water after more than 1 year of storage within a plastic container, with the magnitude of change depending mainly on the type of organic polymer, wall thickness, and container size. The most important variations were measured for the PET and PC bottles. Waters stored in glass bottles with Polyseal™ cone-lined PP screw caps and thick-walled HDPE or PFA containers with linerless screw caps having an integrally molded inner sealing ring preserved their original δ(2)H and δ(18)O values. The carbon, hydrogen, and oxygen stable isotope compositions of the organic polymeric materials were also determined. The results of this study clearly show that for precise and accurate measurements of the water stable isotope composition in aqueous solutions, rigorous sampling and

PENGARUH PLASTICIZER PADA KARAKTERISTIK EDIBLE FILM DARI PEKTIN

Directory of Open Access Journals (Sweden)

Sang Kompiang Wirawan

2012-05-01

Full Text Available EFFECT OF PLASTICIzER ON THE PECTINIC EDIBLE FILM CHARACTERISTICS. The peel of Balinese Citrus contains high concentration of pectin which can be further processed to be edible films. The edible films can be utilized as a food coating which protects the food from any external mass transports such as humid, oxygen, and soluble material and can be served as a carrier to improve the mechanical-handing properties of the food. Edible films made of organic polymers tend to be brittle and thus addition of a plasticizer is required during the process. The work studies the effect of the type and the concentration of plasticizers on the tensile strength, the elongation of break, and the water vapor permeabilty of the edible film. Sorbitol and glycerol were used as plasticizers. Albedo from the citrus was hydrolized with hydrochloride acid 0.1 N to get pectinate substance. Pectin was then dissolved in water dan mixed with the plasticizers and CaCl2.2H2O solution. The concentrations of the plasticizers were 0, 0.03, 0.05, 0.1, and 0.15 mL/mL of solution. The results showed that increasing the concentration of plasticizers will decrease the tensile strength, but increase the elongation and film permeability. Sorbitol-plasticized films are more brittle, however exhibited higher tensile strength and water vapor permeability than of glycerol-plasticized film. The results suggested that glycerol is better plasticizer than sorbitol.  Kulit jeruk bali banyak mengandung pektin yang dapat dimanfaatkan sebagai bahan baku edible film. Edible film bisa digunakan untuk melapisi bahan makanan, melindungi makanan dari transfer massa eksternal seperti kelembaban, oksigen, dan zat terlarut, serta dapat digunakan sebagai carrier untuk meningkatkan penanganan mekanik produk makanan. Film yang terbuat dari bahan polimer organik ini cenderung rapuh sehingga diperlukan penambahan plasticizer. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh kadar dan jenis

Evaluation of Pad 18 Spent Mercury Gold Trap Stainless Steel Container Failure

International Nuclear Information System (INIS)

Skidmore, E.

2016-01-01

Failure of the Pad 18 spent mercury gold trap stainless steel waste container is principally attributed to corrosion induced by degradation of plasticized polyvinyl chloride (pPVC) waste packaging material. Dehydrochlorination of pPVC polymer by thermal and/or radiolytic degradation is well-known to evolve HCl gas, which is highly corrosive to stainless steel and other metals in the presence of moisture. Degradation of the pPVC packaging material was likely caused by radiolysis in the presence of tritium gas within the waste container, though other degradation mechanisms (aging, thermo-oxidation, plasticizer migration) over 30 years storage may have contributed. Corrosion was also likely enhanced by the crevice in the container weld design, and may have been enhanced by the presence of tritiated water. Similar non-failed spent mercury gold trap waste containers did not show radiographic evidence of plastic packaging or trapped free liquid within the container. Therefore, those containers are not expected to exhibit similar failures. Halogenated polymers such as pPVC subject to degradation can evolve halide gases such as HCl, which is corrosive in the presence of moisture and can generate pressure in sealed systems.

Evaluation of Pad 18 Spent Mercury Gold Trap Stainless Steel Container Failure

Energy Technology Data Exchange (ETDEWEB)

Skidmore, E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2016-08-03

Failure of the Pad 18 spent mercury gold trap stainless steel waste container is principally attributed to corrosion induced by degradation of plasticized polyvinyl chloride (pPVC) waste packaging material. Dehydrochlorination of pPVC polymer by thermal and/or radiolytic degradation is well-known to evolve HCl gas, which is highly corrosive to stainless steel and other metals in the presence of moisture. Degradation of the pPVC packaging material was likely caused by radiolysis in the presence of tritium gas within the waste container, though other degradation mechanisms (aging, thermo-oxidation, plasticizer migration) over 30 years storage may have contributed. Corrosion was also likely enhanced by the crevice in the container weld design, and may have been enhanced by the presence of tritiated water. Similar non-failed spent mercury gold trap waste containers did not show radiographic evidence of plastic packaging or trapped free liquid within the container. Therefore, those containers are not expected to exhibit similar failures. Halogenated polymers such as pPVC subject to degradation can evolve halide gases such as HCl, which is corrosive in the presence of moisture and can generate pressure in sealed systems.

Corporate Governance and Shareholder Litigation

OpenAIRE

Kalchev, Georgi

2009-01-01

The probability for shareholder litigation is studied and how corporate governance characteristics and other factors explain it. Shareholder litigation results from failure of corporate governance. Thus a better quality of corporate governance is hypothesized to decrease the litigation probability. Corporate governance index is constructed based on principal components. It is found to be a significant predictor of shareholder litigation.

COMPARATIVE STUDY ON CORPORATE GOVERNANCE

Directory of Open Access Journals (Sweden)

Gavrea Corina

2011-12-01

Full Text Available Corporate governance is a key element of today’s economic reality being more and more present in many countries around the world. This paper has two main objectives. The first one is to offer more insight into the concept of corporate governance by a thorough literature review and by presenting and analyzing a framework of corporate governance. The second objective of this paper is to investigate the corporate governance situation in three developing economies (Romania, Bulgaria and Hungary. The World Bank and the European Bank for Reconstruction and Development published a series of reports on corporate governance. The present study uses data from these reports in order to illustrate how these developing economies are dealing with corporate governance. Based on ROSC Reports a corporate governance score was calculated. As this score shows, there is room for improvement for all three developing economies. This study is important because it shows the differences in corporate governance among developing economies and the need to study these nations at the individual country level. Corporate governance has many benefits for developing economies. It helps developing economies to register sustainable growth rates, to increases investors’ confidence in the national economy, and to increase the ability of capital markets to mobilize savings.

European Corporate Law

DEFF Research Database (Denmark)

Dorresteijn, Adriaan; Teichmann, Christoph; Werlauff, Erik

, and the United Kingdom are taken into account; Italy is now included in this new edition. As in earlier editions, the authors demonstrate that analysis and comparison of national corporate laws yield highly valuable general principles and observations, not least because business organizations, wherever located...... initiatives in such aspects of the corporate environment as regulation of financial institutions and non-financial reporting obligations with a view to sustainability and other social responsibility concerns. The authors, all leading experts in European corporate law, describe current and emerging trends...

Corporate income tax

OpenAIRE

Popová, Barbora

2014-01-01

1 RESUMÉ Corporate Income Tax The aim of this diploma thesis on "Corporate Income Tax" is to outline the current legal background of the corporate income tax and asses and evaluate the most substantial changes regarding the Act no. 586/1992 Coll., Income Tax Act, as amended that have become effective as of January 1, 2014. The changes discussed in this thesis include especially, but are not limited to, the changes adopted in connection with the recodification of Czech Civil Law. This thesis c...

Impact of container material on the development of Aedes aegypti larvae at different temperatures.

Science.gov (United States)

Kumar, Gaurav; Singh, R K; Pande, Veena; Dhiman, R C

2016-01-01

Aedes aegypti, the primary vector of dengue generally breeds in intradomestic and peridomestic containers made up of different materials, i.e. plastic, iron, rubber, earthen material etc. The material of container is likely to affect the temperature of water in container with variation in environmental temperature. The present study was aimed to determine the effect of different container materials on larval development of Ae. aegypti at different temperatures. Newly hatched I instar larvae (2-4 h old) were used in the study and experiments were conducted using three different containers made up of plastic, iron and earthen material. Three replicates for each type of container at 22, 26, 30, 34, 38, 40, and 42°C were placed in environmental chamber for the development of larvae. At temperatures >22°C, 50% pupation was completed in earthen pot within 4.3±0.6 to 6.3±0.6 days followed by plastic containers (5±0 to 8±0 days) and iron containers (6±0 to 9±0 days). Developmental time for 50% pupation in the three containers differed significantly (p containers (p containers resulted in significant variations in the developmental period of larvae. More than 35°C temperature of water was found inimical for pupal development. The results revealed the variation in temperature of water in different types of containers depending on the material of container, affecting duration of larval development. As the larval development was faster in earthen pot as compared to plastic and iron containers, community should be discouraged for storing the water in earthen pots. However, in view of containers of different materials used by the community in different temperature zones in the country, further studies are required for devising area-specific preventive measures for Aedes breeding.

Thermoelastic/plastic analysis of waste-container sleeve: III. Influence of salt strength on sleeve loading. Technical memorandum report (RSI-0018)

International Nuclear Information System (INIS)

Pariseau, W.G.

1975-01-01

Three combinations of salt tensile, compressive and shear strength in linear and nonlinear yield conditions used in the axially symmetric, large displacement thermoelastic/plastic waste-container/sleeve loading estimates show no influence on the analysis. The salt remains elastic throughout the excavation and subsequent 10 year heating period. Tensile stresses are not observed, tensile strength is thus not important to the analysis even at 10 percent of the compressive strength value. Although strictly applicable only to the conditions of the analyses reported here, the capability for incorporating arbitrary strength combinations in linear or non-linear yield conditions is demonstrated. Computer plots of principal stresses and displacement fields at various stages of the excavation and heating simulation aid in the visualization of repository concept mechanics and show the possible need for additional mesh refinement for more precise stress information

Thermal and mechanical properties of bio-based plasticizers mixtures on poly (vinyl chloride

Directory of Open Access Journals (Sweden)

Boussaha Bouchoul

2017-09-01

Full Text Available Abstract The use of mixtures of nontoxic and biodegradable plasticizers coming from natural resources is a good way to replace conventional phthalates plasticizers. In this study, two secondary plasticizers of epoxidized sunflower oil (ESO and epoxidized sunflower oil methyl ester (ESOME were synthesized and have been used with two commercially available biobased plasticizers; isosorbide diesters (ISB and acetyl tributyl citrate (ATBC in order to produce flexible PVC. Different mixtures of these plasticizers have been introduced in PVC formulations. Thermal, mechanical and morphological properties have been studied by using discoloration, thermogravimetric analysis (TGA, differential scanning calorimetry (DSC, dynamic mechanical thermal analysis (DMTA, tensile - strain and scanning electron microscopy (SEM. Studies have shown that PVC plasticization and stabilization were improved by addition of plasticizers blends containing ISB, ATBC, ESO and ESOME. An increase in the content of ESO or ESOME improved thermal and mechanical properties, whereas ESOME/ATBC formulations exhibited the best properties.

Impacts of Socially Responsible Corporate Activities on Korean Consumers’ Corporate Evaluations in the Agrifood Industry

Directory of Open Access Journals (Sweden)

Dongmin Lee

2016-12-01

Full Text Available The variety of socially responsible corporate activities employed in the agrifood industry has been broadening. An increasing number of agrifood companies have been employing strategic approaches to socially responsible activities, reinforced by Porter and Kramer’s concept of creating shared value (CSV. This study compares the effects on corporate evaluations of two socially responsible corporate activities: philanthropic giving and CSV. Because prior studies concerning the effects of corporate prosocial behaviors on consumer responses have yielded mixed results, the present study examines the effects of a priori perceptions of companies by using corporate stereotypes as moderators. The results show that the type of socially responsible corporate activity (CSV vs. philanthropic giving does not influence corporate evaluations. However, in cases of CSV (vs. philanthropic giving, consumers evaluate an unwarm but competent company more attractively and place higher value on an incompetent but warm company. This research is important not only for enriching existing literature, but also for providing guidelines to practitioners with respect to selecting appropriate corporate initiatives based on perceived consumer stereotypes.

Determinants of Corporate Governance and Corporate Performance among Consumer Product Industry in Malaysia: A Theoretical Model

OpenAIRE

Kogilavani Apadore; Siti Subaryani Binti Zainol

2014-01-01

This study discusses on the relationship between corporate governance mechanisms and corporate performance of public listed companies in Bursa Malaysia among the consumer product industry. It investigates the corporate governance mechanisms such as ownership concentration, audit quality, board independence and CEO duality, are used to test on the relationship between both corporate governance and corporate performance. The proposed model indicates that the proportion of independent non-execut...

Deterioration and conservation of plasticized poly (vinyl chloride) objects

DEFF Research Database (Denmark)

Shashoua, Yvonne

2002-01-01

and after accelerated thermal ageing in various environments. Weight loss was used to quantify total loss of plasticizer. Attenuated Total Reflection Fourier Transform Infrared (ATR-FTIR) spectroscopy was used to quantify the concentration of di (2-ethylhexyl) phthalate plasticizer (DEHP) at the surfaces...... of samples. Optical densitometry was used to quantify darkening of the PVC component of samples. Degradation of new and deteriorated PVC was inhibited by enclosing it in a non-adsorbent material, such as glass containing non-agitated air. Such storage inhibited migration and loss of DEHP....

Corporate Governance Country Assessment : Uruguay

OpenAIRE

World Bank

2005-01-01

This report provides an assessment of Uruguay's corporate governance policy framework, enforcement and compliance practices. It highlights recent improvements in corporate governance regulation, makes policy recommendations, and provides investors with a benchmark against which to measure corporate governance in Uruguay. The report identifies several key next steps that focus on implementation including: Improving corporate information, particularly ownership disclosure, related party transac...

National Nuclear Corporation Limited report and financial statements 31 March 1986

International Nuclear Information System (INIS)

1986-01-01

The paper contains the directors' annual report and the audited financial statements of the National Nuclear Corporation Limited, 1985/6. The company is engaged in designing and constructing power stations and nuclear power reactors, and other related work, and in associated research and development. (U.K.)

National Nuclear Corporation Limited report and financial statements 31 March 1986

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

The paper contains the directors' annual report and the audited financial statements of the National Nuclear Corporation Limited, 1985/6. The company is engaged in designing and constructing power stations and nuclear power reactors, and other related work, and in associated research and development. (U.K.).

Performance comparison of plastic shopping bags in modern and traditional retail

Science.gov (United States)

Radini, F. A.; Wulandari, R.; Nasiri, S. J. A.; Winarto, D. A.

2017-07-01

Followed by implementation of paid plastic bag policy in Indonesia’s modern and traditional retail, community question related to plastic shopping bag performance arise. But, there is limited information about it. Therefore, the assessment of the performance to compare between plastic shopping bags in modern retail and traditional retail should be interesting. The observation performance of plastic shopping bag were weight holding capacity, tear resistant and elongation. This performance were tested using Universal Testing Machine. Physical and physico-chemical properties also identified to determine factor affecting the performance of plastic shopping bag. The physical properties were analysed using visual and thickness gauge to see the colour and measure the thickness. The analysis of physico-chemical properties were carried out using DSC (Differential Scanning Calorimetry), TGA (Thermal Gravimetry Analysis), Furnace and FTIR (Fourier Transform Infra Red Spectroscopy) to identify the materials, also its melting and decomposition temperature. The result showed that the performance difference between modern retail plastic bag with traditional retail plastic bag appears only in the performance of elongation. The elongation of modern retail plastic bag is 121 - 413%, while traditional has 170 - 609%. According to physico-chemical test result, modern retail and traditional retail plastic bag contain polyethylene as main material and has melting temperature in the range of High Density Polyethylene (HDPE) melting temperature. However, modern retail plastic bag has 18.31 - 33.87% of inorganic filler percentage, whereas the traditional retail plastic bag has 0.35 - 9.85%. This inorganic filler percentage probably a contributing factor in the elongation performance difference between modern retail plastic bag with traditional retail plastic bag.

Ocean Literacy from kindergarten to secondary school: a vertically articulated curriculum on marine micro-plastics

Science.gov (United States)

Realdon, Giulia; Candussio, Giuliana; Manià, Marinella; Palamin, Serenella

2017-04-01

Marine micro-plastics are a relatively recent issue in research (Thompson et al. 2004), in the media and in education and, due to novelty and relevance, they are a suitable topic for addressing Ocean Literacy within science teaching to different age groups. In fact marine micro-plastics can be used to introduce Ocean Literacy and environmental science, but also traditional science subjects like biology, chemistry and Earth science, with a system approach focused on "understanding the Ocean's influence on humans and human influence on the Ocean". Inspired by the growing public interest for marine micro-plastics and by the lack of specific teaching activities in our country (Italy), we developed a vertically articulated curriculum on micro-plastics for students aged 5-15 years. Our proposal is based on a number of practical activities realized with different language and communication styles to be suitable for different age groups. For younger students (age 5-7) we use drama to address micro-plastics bioaccumulation in marine food chains: children act as fish of different trophic levels who pretend to "eat" micro-plastics models (built from plastic bottles) until the biggest fish is captured and ends up as a "meal" shared by other pupils. Teachers guide the performance and stimulate observations and remarks about the origin of micro-plastics and the correct management of plastic objects. The performance has been documented in a video and presented in a national teacher workshop (3 Giorni per la Scuola, Napoli 2015). For students aged 8-13 we propose observation and manipulation of common household plastic objects, followed by physical/chemical testing of different polymers to understand plastics characteristics that make these materials valuable but troublesome at the same time. Students then observe sand samples, taken from a local beach, containing natural components and man-made fragments (including micro-plastics), so they can directly experience the fate of

The concept of a model of plastic bodily image in architecture

Directory of Open Access Journals (Sweden)

Malakhov Sergey

2017-01-01

Full Text Available One of the key problems of architectural mastery is lack of acute feeling of the plastic image and bodily self-determination of an architectural object at the initial (and the subsequent stage when the design model author is trying to see and understand the context where the future object should appear, literally be born out of thin air. This sensuous amnesia is caused, among other reasons, by the lack of experience in “sculptural modeling”, “hand molding” and today’s common practice of facilitated transfer to analytical computer design. The loss of intense bodily experience, mental connection of one’s own body with an imaginary object, has an effect as well. In its turn, it deprives the object of sensuous corporeal nature, transforms it into a mechanistic conglomerate. The article deals with the body concept, bodily and plastic categories in relation to the architectural shaping and suggests the concept of mediator models linking reality and the designer’s imagination integrated into a new typology of “models of plastic bodily images” (MPBI. The principal medium of these models and the procedures for their creation are based on synthesis of form, interpretation of the “bodily experience”, tactile contact with model material, sculptural forming techniques and sensory evaluations of subject-environment interaction. The proposed typology of models has been piloted by the author in numerous educational and conceptual projects. The results of experiments and developed theoretical principles related to models of plastic bodily images will help achieve better results in the course of basic design and special composition training of architects.

Corporate Taxation and Investment: The Case of the Split Rate Corporate Tax System in Macedonia

Directory of Open Access Journals (Sweden)

Ilija Gruevski

2018-12-01

Full Text Available The majority of experts agree that taxes are distortionary in nature. This is relatively true for all of the different groups of taxes, but for the corporate taxes is exceptionallyobvious. The existence of the corporate tax system can affect the company’s behavior in number of ways and one of the most criticized is the ability for distortion of the choice of the sources of finance. In the following article, we explore the effects from corporate taxation on investment, through the methodological frame of the effective marginal tax rates. The objective is to analyze the investment decision in the case of isolated implementation of corporate taxes which means that the effects from the so-called “double taxation”, induced by the personal taxes are not taken in consideration. We hope to prove that these conditions generate “uneven” distribution of the burden across the projects covered with different sources of finance. Also, we intend to test and explore the properties of some alternative corporate tax systems which are widely known as neutral, such as: the comprehensive business income tax system (CBIT, the imputation corporate tax system (ICT, the full imputation corporate tax system (FICT, the allowance for corporate equity tax system (ACE and the split rate corporate tax system (SRCT. In addition, we support our findings with a practical example: the case study from the implementation of the split rate corporate tax system in Macedonia.

20 CFR 404.1006 - Corporation officer.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Corporation officer. 404.1006 Section 404... Corporation officer. If you are an officer of a corporation, you are an employee of the corporation if you are... director of a corporation, we consider you to be self-employed when you work as a director. ...

plastic waste recycling

African Journals Online (AJOL)

Dr Ahmed

incinerators is increasing around the world. Discarded plastic products ... Agency (EPA) estimated that the amount of plastics throw away is. 50 % greater in the ... The waste plastics were identified using the Society of the Plastic. Industry (SPI) ...

[A study on English loan words in French plastic surgery].

Science.gov (United States)

Hansson, E; Tegelberg, E

2014-10-01

The French language is less and less used as an international scientific language and many French researchers publish their work in English. Nowadays, Annales de Chirurgie Plastique Esthétique is the only international plastic surgical journal published completely in French. The use of English loan words in French plastic surgery has never been studied. The aim of this study was to describe the frequency and types of English loan words in French plastic surgery. A corpus consisting of all the articles in a number of Annales de Chirurgie Plastique Esthethique, chosen by default, was created. The frequency of English loan words was calculated and the types of words were analysed. The corpus contains 367 (0.8%) English loan words. Most of them are non-integrated loan words and calques. The majority of the plastic surgical loan words describe surgical techniques. The French plastic surgical language seems to be influenced by English. The usage of loan words does not always follow the recommendations and the usage is sometimes ambiguous. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Corporate design management

NARCIS (Netherlands)

drs. Patrick van Thiel; drs. Wil Michels

2006-01-01

'Corporate designmanagement' is een vlot geschreven en zeer overzichtelijk standaardwerk op het gebied van corporate designmanagement. Een sterke visuele identiteit is voor een organisatie een doeltreffend middel om zich te positioneren en te profileren. Voorwaarde is wel dat de visuele identiteit

Plastic scintillators with {beta}-diketone Eu complexes for high ionizing radiation detection

Energy Technology Data Exchange (ETDEWEB)

Adadurov, A.F., E-mail: adadurov@isma.kharkov.ua [Institute for Scintillating Materials, NAN of Ukraine, Lenin Avenue 60, 61001 Kharkov (Ukraine); Zhmurin, P.N.; Lebedev, V.N.; Kovalenko, V.N. [Institute for Scintillating Materials, NAN of Ukraine, Lenin Avenue 60, 61001 Kharkov (Ukraine)

2011-10-15

Luminescent and scintillation properties of polystyrene-based plastic scintillators with {beta}-diketone Eu complexes are investigated. A scintillator with dibenzoylmethane Eu complex containing two phenyl groups demonstrates the maximum scintillating efficiency. It is shown that plastic scintillators efficiency is dramatically decreased if {beta}-diketone derivatives contain no phenyl groups as substituents. This fact can be explained by exciplex mechanism of energy transfer from a matrix to Eu complex. - Highlights: > Fluorescent properties of polystyrene scintillators with {beta}-diketone complexes of Eu were studied. > Scintillating efficiency is increased with the number of phenyl groups in Eu complex. > This is related to exciplex mechanism of energy transfer from a polymer matrix to Eu complex.

Corporate Sustainability: A Case Study in the Company Artecola

Directory of Open Access Journals (Sweden)

Cristiane Froehlich

2016-12-01

Full Text Available This study aims to verify the sustainability practices that address the triple bottom line at Artecola. The company headquarters is located in Rio Grande do Sul and it has units in several states in Brazil, Latin America and China. The company operates in three sectors: chemical, leather-footwear and engineering plastics. This research is classified as bibliographic, descriptive and qualitative case study. Data were collected based on 10 semi-structured interviews and internal documents, which were analyzed using qualitative content analysis. The main results show that sustainability practices include the triple bottom line at Artecola. However, the concept of sustainability is not understood in a systemic way by organization. Thus, the three pillars of the triple bottom line (economic, environmental and social are not necessarily included in an interdependent way in the current corporate sustainability actions.

Integration of Corporate Social Responsibility and Corporate Communication

OpenAIRE

Islam, Mohammad Nur

2017-01-01

The purpose of this study is to present a new perspective on the current practices in corporate communications and CSR which calls for an integration of social responsibility and communication activities of corporations as an opportunity of competitive advantage. More specifically, this study looks at this subject from the angle of how companies can use communications to achieve CSR goal, while CSR can be a way to attain efficacy in communication. The study is designed to examine the current ...

THE RELATIONSHIP BETWEEN CORPORATE VOLUNTEERING AND CORPORATE SOCIAL RESPONSIBILITY: RESULTS OF AN EMPIRICAL STUDY

Directory of Open Access Journals (Sweden)

Oscar Licandro

2017-01-01

Full Text Available Corporate Volunteering (CV is a phenomenon that emerged in the second half of the 20th century and began to grow and globalize at the beginning of the 21st century. There seems to be a consensus that the recent growth of Corporate Volunteering is related to the development and growing legitimacy of the concept of Corporate Social Responsibility (CSR. Nevertheless, the theoretical discussion on how the two concepts (Corporate Volunteering and Corporate Social Responsibility are related is just beginning, while empirical research on how this relationship operates in corporate practice is still incipient. This paper presents preliminary results of a research on this subject carried out in Uruguay in 2016. This is a statistical study that analyses the relationship between the application of corporate volunteering activities and the incorporation of a CSR approach to the management of companies. The incorporation of both types of practices is measured by a self-assessment questionnaire that includes 81 indicators (using a Likert scale to assess them, which were designed based on ISO 26000 Guidance of Social Responsibility. The questionnaire was administered to 96 companies, using a comparative analysis between those that practice Corporate Volunteering and those which do not. The results obtained allow us to support the hypothesis that the application of Corporate Volunteering is positively associated with the incorporation of CSR when managing the relationship between the company and its employees and also with the community. Moreover, these results contribute to a better understanding on how both concepts are related.

Drug adsorption to plastic containers and retention of drugs in cultured cells under in vitro conditions.

Science.gov (United States)

Palmgrén, Joni J; Mönkkönen, Jukka; Korjamo, Timo; Hassinen, Anssi; Auriola, Seppo

2006-11-01

Loss of drug content during cell culture transport experiment can lead to misinterpretations in permeability analysis. This study analyses drug adsorption to various plastic containers and drug retention in cultured cells under in vitro conditions. The loss of various drugs to polystyrene tubes and well plates was compared to polypropylene and glass tubes both in deionised water and buffer solution. In cellular uptake experiments, administered drugs were obtained from cultured cells by liquid extraction. Samples were collected at various time points and drug concentrations were measured by a new HPLC-MS/MS method. Acidic drugs (hydrochlorothiazide, naproxen, probenicid, and indomethacin) showed little if any sorption to all tested materials in either water or buffer. In the case of basic drugs, substantial loss to polystyrene tubes and well plates was observed. After 4.5 h, the relative amount remaining in aqueous test solution stored in polystyrene tubes was 64.7 +/- 6.8%, 38.4 +/- 9.1%, 31.9 +/- 6.7%, and 23.5 +/- 6.1% for metoprolol, medetomidine, propranolol, and midazolam, respectively. Interestingly, there was no significant loss of drugs dissolved in buffer to any of the tested materials indicating that buffer reduced surficial interaction. The effect of drug concentration to sorption was also tested. Results indicated that the higher the concentration in the test solution the lower the proportional drug loss, suggesting that the polystyrene contained a limited amount of binding sites. Cellular uptake studies showed considerable retention of drugs in cultured cells. The amounts of absorbed drugs in cellular structures were 0.45%, 4.88%, 13.15%, 43.80%, 23.57% and 11.22% for atenolol, metoprolol, medetomidine, propranolol, midazolam, and diazepam, respectively. Overall, these findings will benefit development and validation of further in vitro drug permeation experiments.

Direct liquefaction of plastics and coprocessing of coal with plastics

Energy Technology Data Exchange (ETDEWEB)

Huffman, G.P.; Feng, Z.; Mahajan, V. [Univ. of Kentucky, Lexington, KY (United States)

1995-12-31

The objectives of this work were to optimize reaction conditions for the direct liquefaction of waste plastics and the coprocessing of coal with waste plastics. In previous work, the direct liquefaction of medium and high density polyethylene (PE), polypropylene (PPE), poly(ethylene terephthalate) (PET), and a mixed plastic waste, and the coliquefaction of these plastics with coals of three different ranks was studied. The results established that a solid acid catalyst (HZSM-5 zeolite) was highly active for the liquefaction of the plastics alone, typically giving oil yields of 80-95% and total conversions of 90-100% at temperatures of 430-450 {degrees}C. In the coliquefaction experiments, 50:50 mixtures of plastic and coal were used with a tetralin solvent (tetralin:solid = 3:2). Using approximately 1% of the HZSM-5 catalyst and a nanoscale iron catalyst, oil yields of 50-70% and total conversion of 80-90% were typical. In the current year, further investigations were conducted of the liquefaction of PE, PPE, and a commingled waste plastic obtained from the American Plastics Council (APC), and the coprocessing of PE, PPE and the APC plastic with Black Thunder subbituminous coal. Several different catalysts were used in these studies.

Corporate governance and the audit committee as part of Corporate Social Responsibility

OpenAIRE

Mancilla Rendón María Enriqueta; Saavedra García María Luisa

2015-01-01

The purpose of this paper is to study the principles of the international standard ISO 26000, and the relation between social responsibility and internal control rules management organizations establish their business and relationship with Corporate Social Responsibility the board of directors and the audit committee to strengthen corporate trust and manage corporate risk. The research is based on a survey of companies listed on the Mexican stock market, in 2011. The variables have been studi...

Strategic corporate sustainability

DEFF Research Database (Denmark)

Grewatsch, Sylvia; Rohrbeck, René; Madsen, Henning

antecedents and outcomes. To overcome this limitation we propose an integrated typology which may facilitate more research on the link between corporate sustainability performance (CSP) and corporate financial performance (CFP). Our expectation is that the strategy type might play a moderating or mediating...

Understanding Corporate Culture.

Science.gov (United States)

Cluff, Gary A.

1988-01-01

Considers concept of corporate culture and discusses several values which can be considered when assessing corporate culture, and the "compatibility scales" used to measure them. Included are discussions of employee attitudes, work atmosphere, internal communications, management style, employment opportunity, stability, business ethics, corporate…

Reinventing Corporate Communications.

Science.gov (United States)

Toth, Elizabeth L.; Trujillo, Nick

1987-01-01

Urges a "re-inventing" of corporate communications in today's organizations, and provides information about how corporations can change in new and positive ways during the current "information age." Discusses specific public relations and organizational communication concepts essential for a comprehensive understanding of…

Beyond the Corporate University: Culture and Pedagogy in the New Millennium.

Science.gov (United States)

Giroux, Henry A., Ed.; Myrsiades, Kostas, Ed.

The chapters in this collection show how and why the critical functions of democratically informed civic education must become the core of the universitys mission. Part 1, "Higher Education and the Politics of Corporate Culture," contains; (1) "Franchising the University" (Jeffrey J. Williams); (2) "Vocationalizing Higher Education: Schooling and…

Rapid purification and plasticization of D-glutamate-containing poly-γ-glutamate from Japanese fermented soybean food natto.

Science.gov (United States)

Ashiuchi, Makoto; Oike, Shota; Hakuba, Hirofumi; Shibatani, Shigeo; Oka, Nogiho; Wakamatsu, Taisuke

2015-12-10

Poly-γ-glutamate (PGA) is a major component of mucilage derived from natto, a Japanese fermented food made from soybeans, and PGAs obtained under laboratory's conditions contain numerous d-glutamyl residues. Natto foods are thus promising as a source for nutritionally safe d-amino acids present in intact and digested polymers, although there is little information on the stereochemistry of PGA isolated directly from natto. Here, we describe the development of a new process for rapid purification of PGA using alum and determined the D-glutamate content of natto PGA by chiral high-performance liquid chromatographic analysis. Further, using hexadecylpyridinium cation (HDP(+)), which is a compound of toothpaste, we chemically transformed natto PGA into a new thermoplastic material, called DL-PGAIC. (1)H nuclear magnetic resonance and calorimetric measurements indicate that DL-PGAIC is a stoichiometric complex of natto PGA and HDP(+) with glass transition points of -16.8 °C and -3.1 °C. Then, DL-PGAIC began decomposing at 210°C, suggesting thermal stability suitable for use as a supramolecular soft plastic. Copyright © 2015 Elsevier B.V. All rights reserved.

Identical or Just Compatible? The Utility of Corporate Identity Values in Communicating Corporate Social Responsibility

DEFF Research Database (Denmark)

Schmeltz, Line

2014-01-01

This study explores whether companies embracing a corporate social responsibility agenda have a strategic focus on adapting and aligning their value systems to reflect such commitment. The analysis is based on empirical data and a conceptual model juxtaposing corporate values, corporate social...... is discussed in relation to the reported difficulties that companies experience when facing the new and complex challenge of communicating corporate social responsibility....

CORPORATE GOVERNANCE IN INDIA: AN ANALYSIS

Directory of Open Access Journals (Sweden)

Meghna Thapar

2017-03-01

Full Text Available Corporate governance is a process, relation and mechanism set up for the corporations and firms based on certain guidelines and principles by which a company is controlled and directed. The principles provided in the system ensure that the company is governed in a way that it is able to set and achieve its goals and objectives in the context of the social, regulatory and market environment, and is able to maximize profits and also benefit those whose interest is involved in it, in the long run. The division and distribution of rights and responsibilities among different participants in the corporation (such as the board of directors, managers, shareholders, creditors, auditors, regulators, and other stakeholders and inclusion of the rules and procedures for making decisions in corporate affairs are identified with the help of Corporate Governance mechanism and guidelines. The need to make corporate governance in India transparent was felt after the high profile corporate governance failure scams like the stock market scam, the UTI scam, Ketan Parikh scam, Satyam scam, which were severely criticized by the shareholders. Thus, Corporate Governance is not just company administration but more than that and includes monitoring the actions, policies, practices, and decisions of corporations, their agents, and affected stakeholders thereby ensuring fair, efficient and transparent functioning of the corporate management system. By this paper, the authors intend to examine the concept of corporate governance in India with regard to the provisions of corporate governance under the Companies Act 2013. The paper will highlight the importance and need of corporate governance in India. We will also discuss the important case laws which contributed immensely in the emergence of corporate governance in India.

Behavioral corporate governance : four empirical studies

NARCIS (Netherlands)

van der Laan, G.

2009-01-01

This thesis consists of studies of corporate governance from a behavioral perspective. The chapters are about trust between chief executive officers (CEOs) and board chairpersons, asymmetric effects of corporate social responsibility on corporate financial performance, compliance with corporate

CORPORATIONS IN RUSSIAN ECONOMICS OF TODAY

Directory of Open Access Journals (Sweden)

S. A. Shirokovskikh

2011-01-01

Full Text Available In Russian economics there are purely Russian private corporations as well as mixed state/private owned and transnational corporations. Specific ways of forming corporations in Russia resulted in corporate management models different from those used abroad (exclusive of largest holdingcompanies with considerable participation of the state. Difference in the corporation forms is determined by relations between owners and top managers. Efficient and sustainable (in the western sense functioning of Russian corporations may become effective only after long timeprovided RF ownership right legislation gets simultaneously improved.

Psychology of plastic and reconstructive surgery: a systematic clinical review.

Science.gov (United States)

Shridharani, Sachin M; Magarakis, Michael; Manson, Paul N; Rodriguez, Eduardo D

2010-12-01

The authors sought to review the various types of patients with psychological abnormalities who may present to the plastic surgeon and the psychological impact of various plastic surgery procedures on these patients. After systematically searching the Embase and PubMed databases and following further refinement (based on the authors' inclusion and exclusion criteria), the authors identified 65 studies. In addition, the authors felt that important information was contained in four textbooks, two press releases, and one Internet database. The inclusion criteria were studies that investigated the psychological outcomes, background, and personality types of patients seeking specific plastic surgery procedures. In addition, studies that addressed the impact of plastic surgery on patients' psychological status and quality of life were also included. The authors excluded studies with fewer than 30 patients, studies that did not pertain to the particular plastic surgery procedures, and studies that addressed psychological sequelae of revision operations. Narcissistic and histrionic personality disorders and body dysmorphic disorder are the three most common psychiatric conditions encountered in patients seeking cosmetic surgery. Overall, plastic surgery not only restores the appearance and function of the disfigured body unit but also alleviates psychological distress. Identifying the psychologically challenging patient before surgical intervention will allow the patient to obtain the appropriate psychological assistance and may result in a healthier individual with or without associated plastic surgery procedures.

Lab-scale thermal analysis of electronic waste plastics

Energy Technology Data Exchange (ETDEWEB)

Liu, Wu-Jun; Tian, Ke; Jiang, Hong, E-mail: jhong@ustc.edu.cn; Yu, Han-Qing

2016-06-05

Highlights: • We provided the experimental evidence that WEEE can be recovered by pyrolysis method. • We explored the thermochemical behaviors of WEEE using online TG–FTIR–MS technology. • The intramolecular oxygen atoms play a pivotal role in the formation of PBDD/Fs. - Abstract: In this work, we experimentally revealed the thermochemical decomposition pathway of Decabromodiphenyl ethane (DBDPE) and tetrabromobisphenol A (TBBPA) containing electronic waste plastics using an online thermogravimetric–fourier transform infrared–mass spectroscopy (TG–FTIR–MS) system, a high resolution gas chromatography/high resolution mass (HRGC–MS) spectroscopy, and a fixed-bed reactor. We found the distribution and species of produced bromides can be easily controlled by adjusting pyrolytic temperature, which is particularly crucial to their recycle. From the analysis of the liquid and solid phase obtained from the fixed-bed reactor, we proposed that the ·Br radicals formed during the pyrolysis process may be captured by organic species derived from the depolymerization of plastics to form brominated compounds or by the inorganic species in the plastics, and that these species remained in the char residue after pyrolysis. Our work for the first time demonstrates intramolecular oxygen atoms play a pivotal role in the formation of PBDD/Fs that pyrolysis of oxygen-free BFRs is PBDD/Fs-free, whereas pyrolysis of oxygen-containing BFRs is PBDD/Fs-reduced.

Intelligence analysis in corporate security

Directory of Open Access Journals (Sweden)

Manojlović Dragan

2014-01-01

Full Text Available Located in the survey indicate that the protection of a corporation, its internal and external interest from the perspective of quality data for intelligence analysis and the need for kroporacije and corporate security. Furthermore, the results indicate that the application is not only practical knowledge of intelligence analysis, but also its scientific knowledge, provides epistemologically oriented critique of traditional techniques undertaken in corporate security in connection with the analysis of the challenges, risks and threats. On the question of whether it can and should be understood only as a form of corporate espionage, any aspect of such a new concept in the theory and practice of corporate security, competitive intelligence activities, as well as an activity or involves a range of different methods and techniques meaningful and expedient activities to be implemented integrally and continuously within corporate security, given the multiple responses to the work. The privatization of intelligence activities as an irreversible process that was decades ago engulfed the western hemisphere, in the first decade of the third millennium has been accepted in Europe, in the sense that corporations at national and multinational levels of system intelligence analysis used not only for your safety but also for the competition, and nothing and less for growth companies and profits. It has become a resource that helps control their managers in corporations to make timely and appropriate decisions. Research has shown that intelligence analysis in corporate security one factor that brings the diversity of the people and give corporations an advantage not only in time, but much more on the market and product.

Corporate entrepreneurship in organisational life-cycle

OpenAIRE

Duobienė, Jurga

2013-01-01

Paper deals with the development of corporate entrepreneurship in different stages of organisational life-cycle. The research presents a model for the evaluation of corporate entrepreneurship and systemises relevant theoretical and empirical research in the field of entrepreneurship and corporate entrepreneurship. Moreover, it describes the development of corporate entrepreneurship in the entire organisational life-cycle since most of researchers who discuss the topics of corporate entreprene...

Role of the Occupational Physician in Corporate Management of Health Risks: An Important Aspect of Corporate Social Responsibility (CSR).

Science.gov (United States)

Sugita, Minoru; Miyakawa, Michiko

2016-01-01

There are various risks involved in corporate activities conducted both within and outside the corporation. Among these, health risks are very important and should be managed effectively as an integral part of corporate social responsibility (CSR). A corporation is responsible for health impairments caused by its activities and suffers great moral and economic loss when they occur. It is essential that corporate management takes proper preventive measures against such risks. Occupational physicians possess substantial knowledge of health risks in corporations. In this study, we examine the role of occupational physicians in the management of corporate health risks. Information was obtained from articles in print and on the Internet. Health risks due to corporate activities involve not only the employees of the corporation but also individuals outside the corporation. Each corporation should effectively use available resources to manage health risks. Occupational physicians are one such valuable resource. However, many corporations do not actively involve occupational physicians in health risk management. According to a current Japanese law, health risks for employees in corporations are managed by occupational physicians, but in general, health risks outside corporations are not. The 1984 Bhopal Disaster in India is an example in which physicians of the corporation were only minimally, if at all, involved in assessing and treating impaired health outside the corporation. The role of occupational physicians should be expanded to include management of health risks outside the corporation. This places a greater burden on the physicians and they must make the effort to train in many academic fields in order to better understand the entire context of health risks due to corporate activities. Some occupational physicians may be hesitant to take on such added responsibilities. Some corporations may not recognize the overall health risks due to its activities and do not

Energy information data base. Corporate author entries: Supplement 4, June 1978-December 1979

International Nuclear Information System (INIS)

1979-12-01

This supplement contains additions to TID-4585-R1 (the authority list for corporate author names used by TIC), and is intended for use with that publication. Supplements are cumulative from June 1978 until another revision is issued

Theoretical Framework for Corporate Governance

OpenAIRE

Georgescu Cristina Elena

2012-01-01

History has revealed that there is a never-ending evolution of theories or models of corporate governance. Companies are trying to instill the sense of governance into their corporate structure. This article is a review of literature on the range of theories in corporate governance. The fundamental theories in corporate governance began with the agency theory, expanded into stewardship theory and stakeholder theory and evolved to transaction cost theory. However, these theories address the ca...

Corporate Media Governance

NARCIS (Netherlands)

Kempen, Petrus Cornelis

2011-01-01

The media can make or break a reputation. This being said, it seems to be essential for companies, governments and institutions to pay specific attention to corporate media management in their daily operations. However, this thesis shows that they often neglect to pay adequate attention to corporate

Corporate contestability and corporate expropriation

Directory of Open Access Journals (Sweden)

Abdul Hadi Zulkafli

2016-12-01

Full Text Available This paper presents evidence on the role of ownership in dealing with corporate expropriation of listed companies in Malaysia. From the perspective of expropriation, a single controlling shareholder is always associated with such behavior due to their power and control at the expense of minority shareholder. However, subsequent individual or coalition of large shareholders can be an important corporate governance tool by providing effective monitoring that would lessen the possibility of expropriation by the controlling shareholder. Relating to that, this study evaluates the role of controlling and large shareholders in dealing with corporate expropriation. It is found that there is a negative relationship between single controlling shareholders and dividend payout ratio indicating that firms with only controlling shareholder will pay a lower dividend due to possible expropriation through profit diversion by controlling shareholder. Using Herfindahl Index as a proxy for ownership contestability, the presence of large shareholders along with controlling shareholder has a positive relationship with dividend payout implying that increased contestability helps to curb the power of controlling shareholder to expropriate fund for their own benefit. In accordance with agency theory, the outcome suggests that large shareholders play a monitoring role in minimizing the Type II agency problem. It is also verifying the argument made based on the Catering Theory of Dividend that the presence of large shareholder brings benefit to all shareholders as they are able to reduce profit diversion by demanding for higher dividend

Corporate Social Performance and Corporate Financial Performance: A Link for the Indian Firms

Directory of Open Access Journals (Sweden)

Rupal Tyagi

2013-03-01

Full Text Available The present study addresses the issue of the relationship between Corporate Social performance and corporate Financial Performance in Indian context under good management theory. The study used S&P ESG India Index as a proxy of CSP/ CSR (Corporate social performance or Corporate Social Responsibility of Indian firms for the first time over the 2005–2011 periods. We designed econometric models and controlled industry specific attributes and performed Weighted Least Square method for the analysis. Overall results show neutral though modest negative relationship between the CSP and CFP which eventually informs that if there would be any relationship, it would be negative.

Micromechanical validation of a mesomodel for plasticity in composites

NARCIS (Netherlands)

van der Meer, F.P.

2016-01-01

In this paper, the performance of a recent homogenized orthotropic plasticity model for fiber reinforced composites (Vogler et al. (2013)) is investigated by comparing the model response against a micromechanical model. It is assumed that the micromechanical model which contains a recent

Serum aluminium levels in glue-sniffer adolescent and in glue containers.

Science.gov (United States)

Akay, Cemal; Kalman, Süleyman; Dündaröz, Ruşen; Sayal, Ahmet; Aydin, Ahmet; Ozkan, Yalçin; Gül, Hüsamettin

2008-05-01

Glue sniffing is a serious medical problem among teenagers. Various chemical substances such as toluene and benzene containing glues have been reported to be toxic. It has been demonstrated that some toxic metals such as lead are elevated in the blood of solvent-addicted patients. Whereas aluminium is an element that has toxic effects on neurological, hematopoetic system and bone metabolism. We want to determine the serum levels of aluminium in glue-sniffer adolescents in comparison with healthy subjects. In addition, we compared aluminium levels of different commercial glue preparations (i.e. metal and plastic containers), to determine which type of container is better for less aluminium toxicity. We measured serum levels of aluminium in 37 glue-sniffer and 37 healthy subjects using atomic absorption spectrophotometry. The average duration of glue-sniffer was 3.8 +/- 0.8 years. We also measured aluminium levels of 10 commercial glue preparations that seven of them with metal and three with plastic containers. We found that serum levels of aluminium were 63.29 +/- 13.20 ng/ml and 36.7 +/- 8.60 ng/ml in glue-sniffer and in control subjects, respectively (P sniffers, it may be a good step to market of glue preparations in plastic instead of metal containers.

Corporate Responsibility

OpenAIRE

World Bank

2004-01-01

Appeals to corporate responsibility often simply take for granted that businesses have ethical responsibilities that go beyond just respecting the law. This paper addresses arguments to the effect that businesses have no such responsibilities. The interesting claim is not that businesses have no ethical responsibility at all but that their primal responsibility is to increase their profits. The extent to which there is reason to take such arguments seriously delineates the limits of corporate...

Theoretical Development of an Orthotropic Elasto-Plastic Generalized Composite Material Model

Science.gov (United States)

Goldberg, Robert; Carney, Kelly; DuBois, Paul; Hoffarth, Canio; Harrington, Joseph; Rajan, Subramaniam; Blankenhorn, Gunther

2014-01-01

The need for accurate material models to simulate the deformation, damage and failure of polymer matrix composites is becoming critical as these materials are gaining increased usage in the aerospace and automotive industries. While there are several composite material models currently available within LSDYNA (Livermore Software Technology Corporation), there are several features that have been identified that could improve the predictive capability of a composite model. To address these needs, a combined plasticity and damage model suitable for use with both solid and shell elements is being developed and is being implemented into LS-DYNA as MAT_213. A key feature of the improved material model is the use of tabulated stress-strain data in a variety of coordinate directions to fully define the stress-strain response of the material. To date, the model development efforts have focused on creating the plasticity portion of the model. The Tsai-Wu composite failure model has been generalized and extended to a strain-hardening based orthotropic yield function with a nonassociative flow rule. The coefficients of the yield function, and the stresses to be used in both the yield function and the flow rule, are computed based on the input stress-strain curves using the effective plastic strain as the tracking variable. The coefficients in the flow rule are computed based on the obtained stress-strain data. The developed material model is suitable for implementation within LS-DYNA for use in analyzing the nonlinear response of polymer composites.

The Organisation of Multibusiness Corporations: Four Roles of the Corporate Office

OpenAIRE

David J. Collis

1998-01-01

This paper derives four archetypal roles for the corporate office in diversified companies and a set of hypotheses about the organisation structure, systems and processes of each from an analysis of the resources which justify the existence of the corporation as a multibusiness entity.

Discrete dislocation plasticity analysis of loading rate-dependent static friction.

Science.gov (United States)

Song, H; Deshpande, V S; Van der Giessen, E

2016-08-01

From a microscopic point of view, the frictional force associated with the relative sliding of rough surfaces originates from deformation of the material in contact, by adhesion in the contact interface or both. We know that plastic deformation at the size scale of micrometres is not only dependent on the size of the contact, but also on the rate of deformation. Moreover, depending on its physical origin, adhesion can also be size and rate dependent, albeit different from plasticity. We present a two-dimensional model that incorporates both discrete dislocation plasticity inside a face-centred cubic crystal and adhesion in the interface to understand the rate dependence of friction caused by micrometre-size asperities. The friction strength is the outcome of the competition between adhesion and discrete dislocation plasticity. As a function of contact size, the friction strength contains two plateaus: at small contact length [Formula: see text], the onset of sliding is fully controlled by adhesion while for large contact length [Formula: see text], the friction strength approaches the size-independent plastic shear yield strength. The transition regime at intermediate contact size is a result of partial de-cohesion and size-dependent dislocation plasticity, and is determined by dislocation properties, interfacial properties as well as by the loading rate.

Plastic frames: Reduction of the kinematical inequality and optimization

International Nuclear Information System (INIS)

Brousse, P.

1979-01-01

It is well-known that the following inequality plays an essential part in the theory of perfectly plastic frames: for all kinematically admissible mechanisms and for bending moments associated with the hinge rotations by the flow rule, the plastic dissipation power is greater than or equal to the load power. This inequality will be termed as the kinematic inequality. It contains parameters generating the mechanisms. In simple cases, several ingenious authors obtained appreciable results excluding parameters. But, in more complicated cases, for instance when the given quantities are not numerical, the parameters remain in the kinematic inequality, thereby precluding exploitation of the kinematic approach. In the present work we overcome this dificulty: we reduce the kinematic inequality, i.e., we replace it by inequalities containing no variable parameter; we then state a process giving automatically such inequalities; finally, we treat a practical application. (orig.)

Energetic materials: crystallization, characterization and insensitive plastic bonded explosives

Energy Technology Data Exchange (ETDEWEB)

Heijden, Antoine E.D.M. van der; Creyghton, Yves L.M.; Marino, Emanuela; Bouma, Richard H.B.; Scholtes, Gert J.H.G.; Duvalois, Willem [TNO Defence, Security and Safety, P. O. Box 45, 2280 AA Rijswijk (Netherlands); Roelands, Marc C.P.M. [TNO Science and Industry, P. O. Box 342, 7300 AH Apeldoorn (Netherlands)

2008-02-15

The product quality of energetic materials is predominantly determined by the crystallization process applied to produce these materials. It has been demonstrated in the past that the higher the product quality of the solid energetic ingredients, the less sensitive a plastic bonded explosive containing these energetic materials becomes. The application of submicron or nanometric energetic materials is generally considered to further decrease the sensitiveness of explosives. In order to assess the product quality of energetic materials, a range of analytical techniques is available. Recent attempts within the Reduced-sensitivity RDX Round Robin (R4) have provided the EM community a better insight into these analytical techniques and in some cases a correlation between product quality and shock initiation of plastic bonded explosives containing (RS-)RDX was identified, which would provide a possibility to discriminate between conventional and reduced sensitivity grades. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

Shipping container for nuclear fuels

International Nuclear Information System (INIS)

Housholder, W.R.; Greer, N.L.

1976-01-01

A container for nuclear materials is described wherein a specially and uniquely constructed pressure vessel and gamma shield assembly for holding the nuclear materials is provided in a housing, and wherein a positioning means extends between the housing and the assembly for spacing the same, insulation in the housing essentially filling the space between the assembly and housing, the insulation comprising beads, globules or the like of water encapsulated in plastic and which, in one important embodiment, contains neutron absorbing matter

Comparison of linear-elastic-plastic, and fully plastic failure models in the assessment of piping integrity

International Nuclear Information System (INIS)

Streit, R.D.

1981-01-01

The failure evaluation of Pressurized Water Reactor (PWR) primary coolant loop pipe is often based on a plastic limit load criterion; i.e., failure occurs when the stress on the pipe section exceeds the material flow stress. However, in addition the piping system must be safe against crack propagation at stresses less than those leading to plastic instability. In this paper, elastic, elastic-plastic, and fully-plastic failure models are evaluated, and the requirements for piping integrity based on these models are compared. The model yielding the 'more' critical criteria for the given geometry and loading conditions defines the appropriate failure criterion. The pipe geometry and loading used in this study was choosen based on an evaluation of a guillotine break in a PWR primary coolant loop. It is assumed that the piping may contain cracks. Since a deep circumferential crack, can lead to a guillotine pipe break without prior leaking and thus without warning it is the focus of the failure model comparison study. The hot leg pipe, a 29 in. I.D. by 2.5 in. wall thickness stainless pipe, was modeled in this investigation. Cracks up to 90% through the wall were considered. The loads considered in this evaluation result from the internal pressure, dead weight, and seismic stresses. For the case considered, the internal pressure contributes the most to the failure loading. The maximum moment stress due to the dead weight and seismic moments are simply added to the pressure stress. Thus, with the circumferential crack geometry and uniform pressure stress, the problem is axisymmetric. It is analyzed using NIKE2D--an implicit, finite deformation, finite element code for analyzing two-dimensional elastic-plastic problems. (orig./GL)

Characteristics of a New Plastic Explosive Named EPX-1

Directory of Open Access Journals (Sweden)

Ahmed Elbeih

2015-01-01

Full Text Available EPX-1 is a new plastic explosive (in the research stage which has been prepared for military and civilian applications. EPX-1 explosive contains pentaerythritol tetranitrate (PETN with different particle size as explosive filler bonded by nonenergetic thermoplastic binder plasticized by dibutyl phthalate (DBP. In this paper, the production method of EPX-1 was described. The crystal morphology was studied by scanning electron microscope (SEM. Heat of combustion was determined experimentally. The compatibility of PETN with the polymeric matrix was studied by vacuum stability test. Sensitivities to impact and friction were measured. The detonation velocity was measured experimentally and the detonation characteristics were calculated by EXPLO5 thermodynamic code. For comparison, Semtex 1A, Semtex 10, Formex P1, and Sprängdeg m/46 were studied. It was concluded that PEX-1 has compatible ingredients, it has the highest detonation velocity of all the studied plastic explosives, and its sensitivity is in the same level of the studied plastic explosives except Semtex 1A.

High prevalence of parental delivery of plastic debris in Cory's shearwaters (Calonectris diomedea).

Science.gov (United States)

Rodríguez, Airam; Rodríguez, Beneharo; Nazaret Carrasco, María

2012-10-01

Plastic ingestion by adult Procellariiformes has been widely recorded, but few studies have evaluated intergenerational transfer. We assessed the prevalence of plastic particles, as well as their basic characteristics, in the gut content of dead Cory's shearwater fledglings stranded by light pollution on Canary Islands. Eighty-three percent of birds were affected, containing on average 8.0 plastic pieces per bird. The average plastic weight per bird was low (2.97±3.97mg) compared with other petrel species. We found no relationships between plastic loads and body condition or body size, but negative effects may be hidden or delayed. We propose to use the fledglings stranded by light pollution to carry out more precise studies to understand the potential hidden costs of plastic ingestion; and to monitor in a long-term the marine debris to develop management actions for the control of pollution at the marine environment. Copyright © 2012 Elsevier Ltd. All rights reserved.

Study of the suitability of DUO plastic bags for the storage of dynamites.

Science.gov (United States)

Sáiz, Jorge; Ferrando, José-Luis; Atoche, Juan-Carlos; García-Ruiz, Carmen

2013-10-10

A comparative study on the retentiveness of two plastic bags (DUO and Royal Pack) has been carried out by gas chromatography with mass spectrometry detection. Two types of dynamites were packed in both plastic bags. The bags were placed into glass jars and headspace analyses were performed over 11 weeks to detect whether the volatile constituents of the dynamites were released from the bags. DUO plastic bags showed much better retentiveness than Royal Pack plastic bags. Ethylene glycol dinitrate (EGDN) was quickly detected in the headspace of the glass jars containing Royal Pack plastic bags after 1 week of storage. On the contrary, only a weak signal of EGDN, which was not detectable in the total ion chromatogram, was detected after 11 weeks of storage. Moreover, DUO plastic bags have shown less background signals than the Royal Pack bags, being the former bags much more suitable for the storage of dynamites. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Rise of a New Corporate Vehicle

DEFF Research Database (Denmark)

Fomcenco, Alex

2014-01-01

So-called Public Benefit Corporations do not bring any revolutionary amendments to the way the traditional corporations are. But they represent a shift in the way our corporate mind and mentality is evolving. Despite the deficiencies in legislation, it must be acknowledged that this new corporate...

12 CFR 619.9185 - Funding Corporation.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Funding Corporation. 619.9185 Section 619.9185 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM DEFINITIONS § 619.9185 Funding Corporation. The term Funding Corporation refers to the Federal Farm Credit Banks Funding Corporation...

Analisis Pengaruh Islamic Corporate Governance Terhadap Corporate Social Responsibility (Studi kasus pada Bank Syariah di Indonesia

Directory of Open Access Journals (Sweden)

Ismawati Haribowo

2016-01-01

Full Text Available This study aims to examine the influence of Islamic corporate governance, size of the Board of Commissioners, the composition of the Board of Commissioners, Frequency of Meetings of the Board of Commissioners, the size of the Audit Committee Independent, The composition of the Audit Committee Number of Meetings Audit Committee, Profitability and Liquidity on the disclosure of corporate social responsibility (case study on the bank Sharia in Indonesia. This research is a quantitative study using scientific research in the form of positive economics. The nature and type of this research is descriptive method used is based on a survey of the literature. Data used is secondary data obtained from www.bi.go.id and corporate websites. The analytical method used is multiple linear regression analysis with SPSS version 22. The population in this study are all Islamic banks registered in Bank Indonesia during the period 2012 to 2014. While the sample is determined by using purposive sampling method in order to obtain a sample of 10 banks with observations for 3 years.Based on the results of multiple regression analysis with significance level of 5%, then the results of this study concluded: (1 Islamic Corporate Governance consisting of Existence and expertise Sharia Supervisory Board has no significant effect on the disclosure of corporate social responsibility. (2 The size of the BOC significant effect on the disclosure of corporate social responsibility. (3 The composition of the Board of Commissioners has no significant effect on the disclosure of corporate social responsibility. (4 The frequency of the number of board meetings no significant effect on the disclosure of disclosure of corporate social responsibility. (5 The size independent audit committee has no significant effect on the disclosure of corporate social responsibility. (6 The composition of the independent audit committee has no significant effect on the disclosure of corporate social

Corporate Governance Quality, Board Gender Diversity and Corporate Dividend Policy: Evidence from Jordan

Directory of Open Access Journals (Sweden)

Ayat S. Al-Rahahleh

2017-06-01

Full Text Available This paper examines the impact of corporate governance quality and board gender diversity on the corporate dividend policy for a set of all non-financial companies listed on Amman Stock Exchange (ASE during the period 2009-2015. The results documented that corporate governance quality and board gender diversity proxies have positive impact on corporate dividend policy. The results also showed that the women representation on the boards of non-financial companies in Jordan is considered low relative to other countries. Particularly, the causes of the poor board gender diversity in Jordan range from lack of awareness about the benefits of gender diversity to the lack of legislation that regulates this issue. It is recommended to non-financial companies in Jordan to boost their compliance with the corporate governance code and adopt diversity policies to enhance the effectiveness of the boards and keep favorable relationships with their shareholders. Furthermore, regulatory bodies in Jordan should take a step towards encouraging gender diversity on boards.

CORPORATE SOCIAL RESPONSIBILITY – CORPORATE BRANDING RELATIONSHIP: AN EMPIRICAL COMPARATIVE STUDY

Directory of Open Access Journals (Sweden)

Bistra VASSILEVA

2009-01-01

Full Text Available Current academic research on the relationship of firms’ CSR activities with corporate branding typically focuses on consumers’ and shareholders’ viewpoints. This research aims to shed light on how organisational members in firms perceive to be the impact of CSR activities upon their corporate brand strategy. Using a survey administered to companies in the U.K. and Bulgaria, the author investigate, firstly, organisational members’ perceptions of the impact of different CSR-related activities upon corporate branding and, secondly, their beliefs about what customers and shareholders think are the impacts of CSR-related activities upon brand image and brand identity. The findings indicated that while organisational members rated quality products, customer service and corporate governance highly as key components of CSR activity, they were much more ambivalent about their companies'commitment to broader actions which involve the 'community' and 'society'. This paper concludes by discussing the implications of the findings for future 'CSR education' among companies.

Device and process for binding toxic or radioactive wastes in plastic

International Nuclear Information System (INIS)

Metscher, K.

1978-01-01

The first section of the process is provided with supply devices for the plastic and a heater to melt it. The second section contains devices for injecting waste and means for compressing the plastic melt and for dispersing the waste to be bound in the plastic melt. The third section is heated and is provided with outgoing pipes for volatile and/or evaporated liquids at normal pressure or sub-pressure. A further section can follow for homogenizing the mixture directly. A condenser for liquefaction is included in the outgoing pipes for the volatile components. A thermoplastic, preferably low molecule polystyrol in granulate form is used, which melts at temperatures above 130 0 C. (PW) [de

TAX AVOIDANCE, RELATED PARTY TRANSACTIONS, CORPORATE GOVERNANCE AND THE CORPORATE CASH DIVIDEND POLICY

OpenAIRE

Sari, Dewi Kartika; Utama, Sidharta; Rossieta, Hilda

2017-01-01

This study aims to investigate the relationship between tax avoidance, related party transactions and the corporate dividend policy. Furthermore, this study will also investigate the moderating effects of the implementation of Corporate Governance (CG) on the relationship between tax avoidance, Related Party Transactions (RPT) and corporate dividend policies. Our sample covers companies listed on the Indonesian Stock Exchange during 2011-2014. The results provide moderate support for the prop...

Introductory Guide to European Corporate Law

DEFF Research Database (Denmark)

Fomcenco, Alex

Introductory Guide to European Corporate Law presents in an easily comprehensible and accessible way the main features and principles that govern European corporate law.......Introductory Guide to European Corporate Law presents in an easily comprehensible and accessible way the main features and principles that govern European corporate law....

The Complementarity between Corporate Governance and Corporate Social Responsibility

OpenAIRE

Andrea Beltratti

2005-01-01

The paper aims at understanding the relation between corporate governance (CG) and corporate social responsibility (CSR). In theory, CG refers mainly to the mechanisms which protect outsiders and ensure an effective working of the firm, while CSR refers mainly to the objective function of the firm and the attention for various stakeholders. The paper discusses these concepts, with particular attention to the relation between CSR and profit maximization. This relation is important to evaluate ...

Plastic scintillators with β-diketone Eu complexes for high ionizing radiation detection

International Nuclear Information System (INIS)

Adadurov, A.F.; Zhmurin, P.N.; Lebedev, V.N.; Kovalenko, V.N.

2011-01-01

Luminescent and scintillation properties of polystyrene-based plastic scintillators with β-diketone Eu complexes are investigated. A scintillator with dibenzoylmethane Eu complex containing two phenyl groups demonstrates the maximum scintillating efficiency. It is shown that plastic scintillators efficiency is dramatically decreased if β-diketone derivatives contain no phenyl groups as substituents. This fact can be explained by exciplex mechanism of energy transfer from a matrix to Eu complex. - Highlights: → Fluorescent properties of polystyrene scintillators with β-diketone complexes of Eu were studied. → Scintillating efficiency is increased with the number of phenyl groups in Eu complex. → This is related to exciplex mechanism of energy transfer from a polymer matrix to Eu complex.

Abiotic and biotic degradation of oxo-biodegradable plastic bags by Pleurotus ostreatus.

Directory of Open Access Journals (Sweden)

José Maria Rodrigues da Luz

Full Text Available In this study, we evaluated the growth of Pleurotus ostreatus PLO6 using oxo-biodegradable plastics as a carbon and energy source. Oxo-biodegradable polymers contain pro-oxidants that accelerate their physical and biological degradation. These polymers were developed to decrease the accumulation of plastic waste in landfills. To study the degradation of the plastic polymers, oxo-biodegradable plastic bags were exposed to sunlight for up to 120 days, and fragments of these bags were used as substrates for P. ostreatus. We observed that physical treatment alone was not sufficient to initiate degradation. Instead, mechanical modifications and reduced titanium oxide (TiO2 concentrations caused by sunlight exposure triggered microbial degradation. The low specificity of lignocellulolytic enzymes and presence of endomycotic nitrogen-fixing microorganisms were also contributing factors in this process.

Abiotic and biotic degradation of oxo-biodegradable plastic bags by Pleurotus ostreatus.

Science.gov (United States)

da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Bazzolli, Denise Mara Soares; Tótola, Marcos Rogério; Demuner, Antônio Jacinto; Kasuya, Maria Catarina Megumi

2014-01-01

In this study, we evaluated the growth of Pleurotus ostreatus PLO6 using oxo-biodegradable plastics as a carbon and energy source. Oxo-biodegradable polymers contain pro-oxidants that accelerate their physical and biological degradation. These polymers were developed to decrease the accumulation of plastic waste in landfills. To study the degradation of the plastic polymers, oxo-biodegradable plastic bags were exposed to sunlight for up to 120 days, and fragments of these bags were used as substrates for P. ostreatus. We observed that physical treatment alone was not sufficient to initiate degradation. Instead, mechanical modifications and reduced titanium oxide (TiO2) concentrations caused by sunlight exposure triggered microbial degradation. The low specificity of lignocellulolytic enzymes and presence of endomycotic nitrogen-fixing microorganisms were also contributing factors in this process.

Abiotic and Biotic Degradation of Oxo-Biodegradable Plastic Bags by Pleurotus ostreatus

Science.gov (United States)

da Luz, José Maria Rodrigues; Paes, Sirlaine Albino; Bazzolli, Denise Mara Soares; Tótola, Marcos Rogério; Demuner, Antônio Jacinto; Kasuya, Maria Catarina Megumi

2014-01-01

In this study, we evaluated the growth of Pleurotus ostreatus PLO6 using oxo-biodegradable plastics as a carbon and energy source. Oxo-biodegradable polymers contain pro-oxidants that accelerate their physical and biological degradation. These polymers were developed to decrease the accumulation of plastic waste in landfills. To study the degradation of the plastic polymers, oxo-biodegradable plastic bags were exposed to sunlight for up to 120 days, and fragments of these bags were used as substrates for P. ostreatus. We observed that physical treatment alone was not sufficient to initiate degradation. Instead, mechanical modifications and reduced titanium oxide (TiO2) concentrations caused by sunlight exposure triggered microbial degradation. The low specificity of lignocellulolytic enzymes and presence of endomycotic nitrogen-fixing microorganisms were also contributing factors in this process. PMID:25419675

Corporate Governance in Costa Rica

OpenAIRE

Gilberto E. Arce; Edgar Robles C.

2005-01-01

This paper examines corporate governance practices in Costa Rica. First, it estimates corporate governance charter measures using firm-level data for 87 Costa Rican firms and studies their impact on the firms` performance; here, the mean of the corporate governance charters for the publicly traded firms is equal to 56. 14. Second, new evidence is presented on de jure and de facto corporate governance charter measures at the firm level and on their effect on the performance of the firm. The re...

Regulating Corporate Governance in the EU

DEFF Research Database (Denmark)

Horn, Laura

In the context of the financial and economic crisis, corporate governance and regulatory supervision failures are at the centre of public debates. Who controls the modern corporation, and why, has become one of the defining social power relations in contemporary capitalism. Regulation Corporate...... transformation of company law and corporate governance regulation. Her findings about the marketization of corporate control are at the core to a better understanding of the broader context of capitalist restructuring in the European Union....

De Ratio van Corporate Governance

NARCIS (Netherlands)

A. de Jong (Abe)

2006-01-01

textabstractAbe de Jong (1970) is Professor in Corporate Finance and Corporate Governance at RSM Erasmus University. He obtained a PhD in finance at Tilburg University (1999). His research and teaching interests are in the area of empirical corporate finance and include capital structure choice,

Beneath the Golden Arches: The McDonald's Corporation [and] Teacher's Guide.

Science.gov (United States)

Brufke, Edward F.

This teacher developed case study which surveys the meteoric rise of the McDonald's Corporation and that of its chief promoter, Ray Kroc, is intended to help secondary students develop an understanding of economics and of the decision-making process. A teacher's guide containing questions for discussion and suggestions for class activities is…

Corporate crime: Criminological and cultural aspects

Directory of Open Access Journals (Sweden)

Keković Zoran

2011-01-01

Full Text Available The process of economic transition in Serbia has highlighted the problem of socially responsible behavior of corporations and especially the growing phenomenon of corporate crime. The consequences of corporate wrongdoing are almost everywhere and cannot be overseen. The most tremendous ones are those related to human casualties, environmental disasters, long-term negative health effects and great material budget losses on local and state levels. The fact that corporations are profiting from criminal activity which causes enormous damage to society and individuals makes public policy makers face the ultimate choice - either to devise new effective measures for reducing and controlling this phenomenon or to retain the standard model of crime control, in accordance with the principles of classical criminal law. The first choice would require one of the pillars of criminal law - the principle of individual and subjective guilt of physical persons as the exclusive grounds for imposing criminal liability - to be either modified and widened in order to be used as a base for imposing corporate criminal liability or partially changed by new criminal law categories which would introduce different grounds for imposing criminal liability on an organization. The second choice would require the decision-makers to refuse to change old and well-established principles. The criminal reality, however, has made most legislatures in Europe and around the world choose the first option and introduce different forms of corporate criminal liability. Serbian criminal legislation has been headed in the same direction since 2008, when it was changed in order to enable the imposing of liability for criminal acts on corporations. However, although corporate criminal liability is becoming the European legislative standard, one question remains - Is this the only measure of criminal politics which can be used as a means of reducing and preventing corporate crime? The authors

A miniaturized plastic dilution refrigerator

International Nuclear Information System (INIS)

Bindilatti, V.; Oliveira, N.F.Jr.; Martin, R.V.; Frossati, G.

1996-01-01

We have built and tested a miniaturized dilution refrigerator, completely contained (still, heat exchanger and mixing chamber) inside a plastic (PVC) tube of 10 mm diameter and 170 mm length. With a 25 cm 2 CuNi heat exchanger, it reached temperatures below 50 mK, for circulation rates below 70 μmol/s. The cooling power at 100 mK and 63 μmol/s was 45 μW. The experimental space could accommodate samples up to 6 mm in diameter. (author)

A discrimination model in waste plastics sorting using NIR hyperspectral imaging system.

Science.gov (United States)

Zheng, Yan; Bai, Jiarui; Xu, Jingna; Li, Xiayang; Zhang, Yimin

2018-02-01

Classification of plastics is important in the recycling industry. A plastic identification model in the near infrared spectroscopy wavelength range 1000-2500 nm is proposed for the characterization and sorting of waste plastics using acrylonitrile butadiene styrene (ABS), polystyrene (PS), polypropylene (PP), polyethylene (PE), polyethylene terephthalate (PET), and polyvinyl chloride (PVC). The model is built by the feature wavelengths of standard samples applying the principle component analysis (PCA), and the accuracy, property and cross-validation of the model were analyzed. The model just contains a simple equation, center of mass coordinates, and radial distance, with which it is easy to develop classification and sorting software. A hyperspectral imaging system (HIS) with the identification model verified its practical application by using the unknown plastics. Results showed that the identification accuracy of unknown samples is 100%. All results suggested that the discrimination model was potential to an on-line characterization and sorting platform of waste plastics based on HIS. Copyright © 2017 Elsevier Ltd. All rights reserved.

Communicating Corporate Social Responsibility on Social Media: Strategies, Stakeholders, and Public Engagement on Corporate Facebook

Science.gov (United States)

Cho, Moonhee; Furey, Lauren D.; Mohr, Tiffany

2017-01-01

The purpose of this study was to explore what corporations with good reputations communicate on social media. Based on a content analysis of 46 corporate Facebook pages from "Fortune's" "World's Most Admired Companies," this study found that corporations communicate noncorporate social responsibility messages more frequently…

Conductivity and transport studies of plasticized chitosan-based proton conducting biopolymer electrolytes

Science.gov (United States)

Shukur, M. F.; Yusof, Y. M.; Zawawi, S. M. M.; Illias, H. A.; Kadir, M. F. Z.

2013-11-01

This paper focuses on the conductivity and transport properties of chitosan-based solid biopolymer electrolytes containing ammonium thiocyanate (NH4SCN). The sample containing 40 wt% NH4SCN exhibited the highest conductivity value of (1.81 ± 0.50) × 10-4 S cm-1 at room temperature. Conductivity has increased to (1.51 ± 0.12) × 10-3 S cm-1 with the addition of 25 wt% glycerol. The temperature dependence of conductivity for both salted and plasticized systems obeyed the Arrhenius rule. The activation energy (Ea) was calculated for both systems and it is found that the sample with 40 wt% NH4SCN in the salted system obtained an Ea value of 0.148 eV and that for the sample containing 25 wt% glycerol in the plasticized system is 0.139 eV. From the Fourier transform infrared studies, carboxamide and amine bands shifted to lower wavenumbers, indicating that chitosan has interacted with NH4SCN salt. Changes in the C-O stretching vibration band intensity are observed at 1067 cm-1 with the addition of glycerol. The Rice and Roth model was used to explain the transport properties of the salted and plasticized systems.

Discourses and Inter-Corporeity

Directory of Open Access Journals (Sweden)

Algis Mickūnas

2015-10-01

Full Text Available Contemporary European theories have focused attention on corporeity, its surface excitations and passions, and even on politically constructed bodies – how do men and women “carry their bodies”. The great variety of such claims suggests transformations in theoretical thinking, yet such changes were already articulated at another level by phenomenological studies: kinesthetic body. It is obvious that to speak of corporeity is possible only on the basis of analyses of corporeal movements. Thus, the aim of this essay is to disclose the structures of bodily movements, constituting the basis of primordial awareness – not “I think” but “I can”. In the essay there are presented a number of theses of post modernists who have not developed adequate analyses of corporeal movements.

12 CFR 561.45 - Service corporation.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Service corporation. 561.45 Section 561.45... AFFECTING ALL SAVINGS ASSOCIATIONS § 561.45 Service corporation. The term service corporation means any corporation, the majority of the capital stock of which is owned by one or more savings associations and which...

46 CFR 67.39 - Corporation.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Corporation. 67.39 Section 67.39 Shipping COAST GUARD... Citizenship Requirements for Vessel Documentation § 67.39 Corporation. (a) For the purpose of obtaining a registry or a recreational endorsement, a corporation meets citizenship requirements if: (1) It is...

Our plastic age.

Science.gov (United States)

Thompson, Richard C; Swan, Shanna H; Moore, Charles J; vom Saal, Frederick S

2009-07-27

Within the last few decades, plastics have revolutionized our daily lives. Globally we use in excess of 260 million tonnes of plastic per annum, accounting for approximately 8 per cent of world oil production. In this Theme Issue of Philosophical Transactions of the Royal Society, we describe current and future trends in usage, together with the many benefits that plastics bring to society. At the same time, we examine the environmental consequences resulting from the accumulation of waste plastic, the effects of plastic debris on wildlife and concerns for human health that arise from the production, usage and disposal of plastics. Finally, we consider some possible solutions to these problems together with the research and policy priorities necessary for their implementation.

Our plastic age

Science.gov (United States)

Thompson, Richard C.; Swan, Shanna H.; Moore, Charles J.; vom Saal, Frederick S.

2009-01-01

Within the last few decades, plastics have revolutionized our daily lives. Globally we use in excess of 260 million tonnes of plastic per annum, accounting for approximately 8 per cent of world oil production. In this Theme Issue of Philosophical Transactions of the Royal Society, we describe current and future trends in usage, together with the many benefits that plastics bring to society. At the same time, we examine the environmental consequences resulting from the accumulation of waste plastic, the effects of plastic debris on wildlife and concerns for human health that arise from the production, usage and disposal of plastics. Finally, we consider some possible solutions to these problems together with the research and policy priorities necessary for their implementation. PMID:19528049

Corporate Governance in Crisis? The Politics of EU Corporate Governance Regulation

DEFF Research Database (Denmark)

Horn, Laura

2012-01-01

on the transformation of company law and corporate governance in the last decade. Here, the article illustrates how company law has become increasingly focused on the rights of shareholders, while worker rights have been relegated to the area of social policies and labour law. The study also traces the shift from...... a legislative programme centred on company law harmonisation towards a regulatory approach based on minimum requirements and mutual recognition, increasingly geared at adjusting the governance of corporations to the demands of liberalised capital markets. The second section then reflects on the current...... developments in corporate governance regulation in the context of financial and economic crisis....

Corporate Foresight and Strategic Decisions

DEFF Research Database (Denmark)

Gomez Portaleoni, Claudio; Marinova, Svetla Trifonova; Ul-Haq, Rehan

. It provides an extensive analysis of extant theories of corporate foresight and strategic management, brings in new notions and insights, and presents an in-depth case study exploration of corporate foresight of a European bank. The understanding of organizational future is influenced by the perceived......The investigation of the future of an organization has always captivated the attention of academics and business managers. Presently, the aspiration to entrench future-relevant insights into management practices is a must. Companies that have made attempts to use corporate foresight have generally...... dealt successfully with internal information sharing processes that in most cases have prepared them for the challenges of the future. Corporate Foresights and Strategic Decisions investigates the relationships between corporate foresight and management decision-making processes in organizations...

Plasticizer contamination in edible vegetable oil in a U.S. retail market.

Science.gov (United States)

Bi, Xiaolong; Pan, Xiaojun; Yuan, Shoujun; Wang, Qiquan

2013-10-02

With the wide application of plastics, the contamination of plasticizers migrating from plastic materials in the environment is becoming ubiquitous. The presence of phthalates, the major group of plasticizers, in edible items has gained increasingly more concern due to their endocrine disrupting property. In this study, 15 plasticizers in 21 edible vegetable oils purchased from a U.S. retail market were analyzed using gas chromatograph-mass spectrometry. Di(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DiBP) were detected in all oil samples. Benzylbutyl phthalate (BzBP), dibutyl phthalate (DBP), and diethyl phthalate (DEP) were detected at a rate of 95.2, 90.5, and 90.5%, respectively. The detection rates for all other plasticizers ranged from 0 to 57.1%. The content of total plasticizers in oil samples was determined to be 210-7558 μg/kg, which was comparable to the content range in oil marketed in Italy. Although no significant difference (p = 0.05) in the total content of plasticizer was observed among oil species (soybean, canola, corn, and olive), the wider range and higher average of total content of plasticizers in olive oil than other oil species indicated the inconsistence of plasticizer contamination in olive oil and a possible priority for quality monitoring. No significant difference (p = 0.05) in the total content of plasticizers was found among glass-bottle (n = 4), plastic-bottle (n = 14), and metal-can (n = 3) packaging, implying that oil packaging is not the major cause of plasticizer contamination. The daily intake amount of plasticizers contained in edible oil on this U.S. retail market constituted only a minimum percentage of reference dose established by US EPA, thus no obvious toxicological effect might be caused. However, the fact that DEHP content in two olive oils exceeded relevant special migration limits (SMLs) of Europe and China might need attention.

THE IMPACT OF CORPORATE SOCIAL RESPONSIBILITY ON CORPORATE VALUE

Directory of Open Access Journals (Sweden)

Diana DOBRESCU

2013-12-01

Full Text Available This paper investigates the correlation between Corporate Social Responsability actions and companies’ value. For this purpose a data base was created for 101 important companies in Romania, for years 2011 and 2012. The data was processed using Eviews 7 and SAS 9.2 softwares and the econometric variables specific determinations were interpreted in an econometric approach. A new index for the Corporate Social Responsabilitiy hierarchy levels was proposed and its applicability was demonstrated.

27 CFR 31.123 - New corporation.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false New corporation. 31.123... Requiring Registration As A New Business § 31.123 New corporation. Where a new corporation is formed to take over and conduct the business of one or more corporations that have registered under this part, the new...

CONTAINER DISTRIBUTION AND SLOW RELEASE FERTILIZERS APPLICATION ALONG THE PRE-NURSERY INFLUENCING OIL PALM SEEDLINGS GROWTH

Directory of Open Access Journals (Sweden)

Paulo César Teixeira

2009-09-01

Full Text Available This research had as objective to verify the influence in growth, nutrition and dry matter partition in oil palm seedling by type and dosages of slow release fertilizers (SRF and percentage of tray occupation by plastic containers during pre-nursery. The experiment consisted of 16 treatments, in factorial scheme: two types of SRF (Osmocote® e Basacote mini, two dosages (0 and 3 kg/m3 and four schemes for the container distribution used to attain 100%, 66%, 50% and 25% of tray occupation. An additional treatment composed of 15 x 15 cm plastic bags filled with soil was added. Pre-germinated seeds of oil palm were put in plastic containers of 120 cm3 containing substratum and in plastic bags containing soil. After three months, the seedlings were transplanted to 40 x 40 cm plastic bags containing soil. At this time, height, diameter, dry matter and concentration of N, P, K, Ca and Mg were evaluated. After 10 months, seedlings were evaluated for height and diameter and after 16 months, seedlings had the height, diameter and dry matter weight evaluated. Addition of SRF was fundamental for seedlings development. Different percentages of tray occupation by containers during pre-nursery did not influence height and diameter of oil palm seedlings at 10 and 16 months old. The evaluation after 10 months showed that plants fertilized with Osmocote® were higher than those fertilized with Basacote mini. The evaluations after 16 months showed that plants fertilized during the pre-nursery had higher height, diameter and leaflets, leaf, aboveground and total dry matter than plants not fertilized.

Fortune 500 Corporate Headquarters

Data.gov (United States)

Department of Homeland Security — Large Corporate Headquarters in the United States This database is composed of 'an annual list of the 500 largest industrial corporations in the U.S., published by...

The Conceptual Review of Interaction between Corporate Wisdom and Corporate Entrepreneurship

Directory of Open Access Journals (Sweden)

Metehan ORTKARPUZ

2017-12-01

Full Text Available Wisdom is an important point of view in the literature as the highest desired attainment of knowledge management and a new goal. Wisdom is a mysterious concept existing at the top of the hierarchy of data, information, and knowledge that occurs by the evolving of knowledge with experience and thought. This concept constitutes institutional wisdom when dealt with on an institutional basis. Today's competition conditions move corporate wisdom understanding on the agenda due to the insufficiency of traditional knowledge management approach towards sustainable targets and keeping the business vulnerable to rapidly changing conditions. Entrepreneurship is one of the most popular phenomena influenced by the developments in knowledge management. Entrepreneurship necessitates the creation of value by seeing opportunities, reaching different information before others, and using it differently from others, thereby becoming a member of the information society. Entrepreneurship processes aiming to create value through transformation and innovation studies in an existing organization are called "corporate entrepreneurship". Corporate entrepreneurship is a capability that enables businesses to gain competitive advantage through conscious efforts which actuate internal and external initiatives against changing conditions and uncertainties. It is thought that the factors of corporate wisdom understanding are interacting with elements of corporate entrepreneurship. In this study, a conceptual review is carried out in order to reveal the mentioned interaction, to take all dimensions of the elements which the concepts are based on.

Corporal Punishment and the Schools.

Science.gov (United States)

Bauer, Gordon B.; And Others

1990-01-01

In order to understand and evaluate the continued prevalence of corporal punishment in school systems, this article reviews the following topics: (1) historical issues; (2) current demographics and correlates; (3) the effectiveness of corporal punishment in school settings; (4) myths; (5) alternatives to corporal punishment; and (6) social policy.…

Uruguay - Corporate Governance Country Assessment

OpenAIRE

World Bank

2005-01-01

This report provides an assessment of Uruguay's corporate governance policy framework, enforcement and compliance practices. It highlights recent improvements in corporate governance regulation, makes policy recommendations, and provides investors with a benchmark against which to measure corporate governance in Uruguay. The report identifies several key next steps that focus on implementa...

Corporate Social Responsibility for Sustainability

Directory of Open Access Journals (Sweden)

Wojciech Przychodzeń

2014-06-01

Full Text Available Purpose: The purpose of this paper is to is to provide insights on implementing corporate social responsibility for sustainability (CSRS concept and show how it differs from basic corporate social responsibility (CSR. Methodology: The paper discusses major issues with references to existing literature and real business cases from S&P500 consumer discretionary sector. Findings: The main fi nding of this paper is that CSRS could provide the company with a competitive advantage as a growing number of consumers become more sustainable conscious. It could also help to overcome the increasing consumers’ skepticism towards corporate social responsibility practices. Finally, it can also be seen as a step forward in defi ning what types of corporate activities are associated with desirable social and environmental gains. Research limitations: Our sample was restricted to the U.S. fi rms from the consumer discretionary sector. Therefore, conclusions should not be generalized to other markets. Our study is based on the analysis of environmental and social responsibility statements and assumes that they accurately represent corporate commitment in majority of the cases. Practical implications: CSRS offers corporations the opportunity to use their unique skills, culture, values, resources, and management capabilities to lead social progress by making sustainability part of its internal corporate logic. Originality: The paper raises the importance of the different conditions necessary for making sustainable development concept an important part of corporate strategy.

Impact of Bio-Based Plastics on Current Recycling of Plastics

Directory of Open Access Journals (Sweden)

Luc Alaerts

2018-05-01

Full Text Available Bio-based plastics are increasingly appearing in a range of consumption products, and after use they often end up in technical recycling chains. Bio-based plastics are different from fossil-based ones and could disturb the current recycling of plastics and hence inhibit the closure of plastic cycles, which is undesirable given the current focus on a transition towards a circular economy. In this paper, this risk has been assessed via three elaborated case studies using data and information retrieved through an extended literature search. No overall risks were revealed for bio-based plastics as a group; rather, every bio-based plastic is to be considered as a potential separate source of contamination in current recycling practices. For PLA (polylactic acid, a severe incompatibility with PET (polyethylene terephthalate recycling is known; hence, future risks are assessed by measuring amounts of PLA ending up in PET waste streams. For PHA (polyhydroxy alkanoate there is no risk currently, but it will be crucial to monitor future application development. For PEF (polyethylene furanoate, a particular approach for contamination-related issues has been included in the upcoming market introduction. With respect to developing policy, it is important that any introduction of novel plastics is well guided from a system perspective and with a particular eye on incompatibilities with current and upcoming practices in the recycling of plastics.

Corporate insurance and debt capacity: Empirical evidence from Italy

Directory of Open Access Journals (Sweden)

Fabrizio Santoboni

2012-11-01

Full Text Available In banks/enterprises relationships a key role is played by Basel II Framework, which accurately correlates banks’ capital requirement to risks, by stimulating a more precise creditworthiness assessment. As known, the containment of risks inherent in bank financing can be carried out ex ante, through an adequate screening, which allows the proper assessment of enterprises’ economic and financial situation and a sound composition of the total loan portfolio, and ex post, through guarantees, which allow benefiting from a loss reduction only after insolvency has occurred. From this perspective, Basel II Framework brings important changes, since life insurance and surety policy are “eligible” guarantees for Credit Risk Mitigation. Nevertheless, banks could offer a better pricing to borrowers not because they are less risky, but because the whole operation would need a lower capital requirement. Therefore, corporate risks reduction – which would allow, in the absence of credit rationing, a more profitable debt capacity – is necessarily achieved through an appropriate “umbrella insurance”, able to cope with both direct and indirect loss. This work aims at investigating the existence of a “virtuous” relationship among corporate insurance purchases, credit risk and debt capacity. Such aim has been pursued through different steps: review of literature, to identify the reasons of corporate demand for insurance; analysis of Italian enterprises’ corporate insurance purchases; drafting of a questionnaire, to submit to a sample of the main insurance companies working in Italy, intended to identify what kind of role they play in the relation with enterprises and which insurance products they offer; drafting of a questionnaire, to submit to a sample of the main banks working in Italy, intended to investigate whether and how the possession of corporate insurance is taken into consideration in the determination of enterprises�

Transport and release of chemicals from plastics to the environment and to wildlife

Science.gov (United States)

Teuten, Emma L.; Saquing, Jovita M.; Knappe, Detlef R. U.; Barlaz, Morton A.; Jonsson, Susanne; Björn, Annika; Rowland, Steven J.; Thompson, Richard C.; Galloway, Tamara S.; Yamashita, Rei; Ochi, Daisuke; Watanuki, Yutaka; Moore, Charles; Viet, Pham Hung; Tana, Touch Seang; Prudente, Maricar; Boonyatumanond, Ruchaya; Zakaria, Mohamad P.; Akkhavong, Kongsap; Ogata, Yuko; Hirai, Hisashi; Iwasa, Satoru; Mizukawa, Kaoruko; Hagino, Yuki; Imamura, Ayako; Saha, Mahua; Takada, Hideshige

2009-01-01

Plastics debris in the marine environment, including resin pellets, fragments and microscopic plastic fragments, contain organic contaminants, including polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons, petroleum hydrocarbons, organochlorine pesticides (2,2′-bis(p-chlorophenyl)-1,1,1-trichloroethane, hexachlorinated hexanes), polybrominated diphenylethers, alkylphenols and bisphenol A, at concentrations from sub ng g–1 to µg g–1. Some of these compounds are added during plastics manufacture, while others adsorb from the surrounding seawater. Concentrations of hydrophobic contaminants adsorbed on plastics showed distinct spatial variations reflecting global pollution patterns. Model calculations and experimental observations consistently show that polyethylene accumulates more organic contaminants than other plastics such as polypropylene and polyvinyl chloride. Both a mathematical model using equilibrium partitioning and experimental data have demonstrated the transfer of contaminants from plastic to organisms. A feeding experiment indicated that PCBs could transfer from contaminated plastics to streaked shearwater chicks. Plasticizers, other plastics additives and constitutional monomers also present potential threats in terrestrial environments because they can leach from waste disposal sites into groundwater and/or surface waters. Leaching and degradation of plasticizers and polymers are complex phenomena dependent on environmental conditions in the landfill and the chemical properties of each additive. Bisphenol A concentrations in leachates from municipal waste disposal sites in tropical Asia ranged from sub µg l–1 to mg l–1 and were correlated with the level of economic development. PMID:19528054

Creditor Governance and Corporate Policies

DEFF Research Database (Denmark)

Arnold, Marc; Westermann, Ramona

This paper analyzes the impact of debt covenant renegotiations on corporate policies. We develop a structural model of a levered firm that can renegotiate debt both at investment and in corporate distress. Covenant renegotiation at investment disciplines equity holders in their financing...... and investment decisions and, hence, mitigates the agency cost of debt. Our model explains the empirical intensity and patterns of the occurrence of debt renegotiation. We also quantify the role of debt covenant renegotiations as a governance channel on corporate financial policies and on the value of corporate...

Corporate Accounting Policy Efficiency Improvement

Directory of Open Access Journals (Sweden)

Elena K. Vorobei

2013-01-01

Full Text Available The article is focused on the issues of efficient use of different methods of tax accounting for the optimization of income tax expenses and their consolidation in corporate accounting policy. The article makes reasoned conclusions, concerning optimal selection of depreciation methods for tax and bookkeeping accounting and their consolidation in corporate accounting policy and consolidation of optimal methods of cost recovery in production, considering business environment. The impact of the selected methods on corporate income tax rates and corporate property tax rates was traced and tax recovery was estimated.

Biodegradability of plastics.

Science.gov (United States)

Tokiwa, Yutaka; Calabia, Buenaventurada P; Ugwu, Charles U; Aiba, Seiichi

2009-08-26

Plastic is a broad name given to different polymers with high molecular weight, which can be degraded by various processes. However, considering their abundance in the environment and their specificity in attacking plastics, biodegradation of plastics by microorganisms and enzymes seems to be the most effective process. When plastics are used as substrates for microorganisms, evaluation of their biodegradability should not only be based on their chemical structure, but also on their physical properties (melting point, glass transition temperature, crystallinity, storage modulus etc.). In this review, microbial and enzymatic biodegradation of plastics and some factors that affect their biodegradability are discussed.

CORPORATE REBRANDING OF GRAMEDIA STORE (CORPORATE REBRANDING DI GRAMEDIA STORE

Directory of Open Access Journals (Sweden)

Natasha Helena Kairupan

2016-10-01

Full Text Available Abstract. The purposes of this research are to determine the stages of analysis, planning, and evaluation of corporate rebranding process of Gramedia Book Store to be Gramedia Store to rise stakeholder’s awareness. The method used is descriptive qualitative with positivism paradigm. The technique of collecting data through in-depth interview, observation, and literature study. The result of this research showed the analysis stage by analyzing the market through insights and foresights, brand audit through SWOT analysis, and identifying opportunities. The planning stage is by determine the purpose of the planning process and then determine the target audience, consist of external and internal customer. The planning of external customer by renaming and change of corporate identity, and marketing planning using communication channel (above the line and below the line. The planning of internal customer by Brand Induction, training, inspiration briefing at store, and innovation competition. The evaluation of rebranding process of Gramedia Store is having a focus group discussion with customer, media monitoring, and presentation to BOD. Keywords : Process, Corporate Rebranding, Stakeholder Awareness, Corporate Identity, Gramedia Store Abstrak.Tujuan penelitian ini adalah untuk mengetahui bagaimana tahapan analisis, perencanaan, dan evaluasi proses corporate rebranding Gramedia Book Store menjadi Gramedia Store untuk meningkatkan stakeholder awareness. Pendekatan yang digunakan adalah kualitatif dengan paradigma positivisme dan jenis studi deksriptif. Teknik pengumpulan data yang dilakukan melalui wawancara mendalam, observasi, dan studi pustaka. Berdasarkan hasil penelitian, tahapan analisis dilakukan dengan menganalisis pasar melalui insights dan foresights, audit merek dengan analisis SWOT, dan mengidentifikasi peluang. Dalam tahapan perencanaan dengan menentukan tujuan kemudian menentukan target audiens, yaitu eksternal dan internal. Perencanaan

Ductile fracture of cylindrical vessels containing a large flaw

Science.gov (United States)

Erdogan, F.; Irwin, G. R.; Ratwani, M.

1976-01-01

The fracture process in pressurized cylindrical vessels containing a relatively large flaw is considered. The flaw is assumed to be a part-through or through meridional crack. The flaw geometry, the yield behavior of the material, and the internal pressure are assumed to be such that in the neighborhood of the flaw the cylinder wall undergoes large-scale plastic deformations. Thus, the problem falls outside the range of applicability of conventional brittle fracture theories. To study the problem, plasticity considerations are introduced into the shell theory through the assumptions of fully-yielded net ligaments using a plastic strip model. Then a ductile fracture criterion is developed which is based on the concept of net ligament plastic instability. A limited verification is attempted by comparing the theoretical predictions with some existing experimental results.

Corporate accountability and transitional justice

Directory of Open Access Journals (Sweden)

Sabine Michalowski

2015-10-01

Full Text Available Traditionally, transitional justice processes do not address the role of corporations in dictatorships or in armed conflicts that give rise to the need for dealing with grave and systematic human rights violations. However, there is a growing awareness that in many contexts corporations contribute to these violations, often in the form of corporate complicity with the principal violators. An argument can therefore be made that to achieve the aims of transitional justice and establish a holistic narrative of the past as well as obtain justice and reparations for victims requires investigating and addressing the role of corporate actors. This article uses the example of Colombia’s Justice and Peace process to show some of the complexities, opportunities and challenges that arise if transitional justice measures focus primarily on criminal law and create a specific legal framework, outside of the ordinary justice systems, only for a limited group of primary perpetrators, in the Colombian case for members of the armed groups who demobilised. It is argued that the exclusion of corporate actors in contexts where their role is regarded as significant leads to victims seeking alternatives ways to obtain justice and that both victims and corporations would benefit if transitional justice mechanisms addressed the role of corporations.

Corporate moral responsibility in health care.

Science.gov (United States)

Wilmot, S

2000-01-01

The question of corporate moral responsibility--of whether it makes sense to hold an organisation corporately morally responsible for its actions, rather than holding responsible the individuals who contributed to that action--has been debated over a number of years in the business ethics literature. However, it has had little attention in the world of health care ethics. Health care in the United Kingdom (UK) is becoming an increasingly corporate responsibility, so the issue is increasingly relevant in the health care context, and it is worth considering whether the specific nature of health care raises special questions around corporate moral responsibility. For instance, corporate responsibility has usually been considered in the context of private corporations, and the organisations of health care in the UK are mainly state bodies. However, there is enough similarity in relevant respects between state organisations and private corporations, for the question of corporate responsibility to be equally applicable. Also, health care is characterised by professions with their own systems of ethical regulation. However, this feature does not seriously diminish the importance of the corporate responsibility issue, and the importance of the latter is enhanced by recent developments. But there is one major area of difference. Health care, as an activity with an intrinsically moral goal, differs importantly from commercial activities that are essentially amoral, in that it narrows the range of opportunities for corporate wrongdoing, and also makes such organisations more difficult to punish.

Motives of corporate political donations: industry regulation, subjective judgement and the origins of pragmatic and ideological corporations.

Science.gov (United States)

Harrigan, Nicholas M

2017-12-01

What motivates corporate political action? Are corporations motivated by their own narrow economic self-interest; are they committed to pursuing larger class interests; or are corporations instruments for status groups to pursue their own agendas? Sociologists have been divided over this question for much of the last century. This paper introduces a novel case - that of Australia - and an extensive dataset of over 1,500 corporations and 7,500 directors. The paper attempts to understand the motives of corporate political action by examining patterns of corporate political donations. Using statistical modelling, supported by qualitative evidence, the paper argues that, in the Australian case, corporate political action is largely motivated by the narrow economic self-interest of individual corporations. Firms' interests are, consistent with regulatory environment theory, defined by the nature of government regulation in their industry: those in highly regulated industries (such as banking) and those dependent on government support (such as defence) tend to adopt a strategy of hedging their political support, and make bipartisan donations (to both major parties). In contrast, firms facing hostile regulation (such as timber or mining), and those without strong dependence on state support (such as small companies) tend to adopt a strategy of conservative partisanship, and make conservative-only donations. This paper argues that regulatory environment theory needs to be modified to incorporate greater emphasis on the subjective political judgements of corporations facing hostile regulation: a corporation's adoption of conservative partisanship or hedging is not just a product of the objective regulation they face, but also whether corporate leaders judge such regulation as politically inevitable or something that can be resisted. Such a judgement is highly subjective, introducing a dynamic and unpredictable dimension to corporate political action. © London School of

The corporate security professional

DEFF Research Database (Denmark)

Petersen, Karen Lund

2013-01-01

In our age of globalization and complex threat environments, every business is called upon to manage security. This tendency is reflected in the fact that a wide range of businesses increasingly think about security in broad terms and strive to translate national security concerns into corporate...... speech. This article argues that the profession of the security manager has become central for understanding how the relationship between national and corporate security is currently negotiated. The national security background of most private sector security managers makes the corporate security...... professional inside the company a powerful hybrid agent. By zooming in on the profession and the practice of national security inside companies, the article raises questions about where to draw the line between corporate security and national security along with the political consequences of the constitution...

Stability Study of Sunscreens with Free and Encapsulated UV Filters Contained in Plastic Packaging.

Science.gov (United States)

Briasco, Benedetta; Capra, Priscilla; Mannucci, Barbara; Perugini, Paola

2017-05-31

Sunscreens play a fundamental role in skin cancer prevention and in protection against photo-aging. UV filters are often photo-unstable, especially in relation to their vehicles and, being lipophilic substances, they are able to interact with plastic packaging. Finally, UV filter stability can be significantly affected by the routine use of the product at high temperatures. This work aims to study the stability of sunscreen formulations in polyethylene packaging. Butyl methoxydibenzoylmethane and octocrylene, both in a free form and as encapsulated filters were chosen as UV filters. Stability evaluations were performed both in the packaging and on the formulations. Moreover, a further two non-destructive techniques, near-infrared (NIR) spectroscopy and a multiple light scattering technique, were also used to evaluate the stability of the formulation. Results demonstrated clearly that all of the pack underwent significant changes in its elastic/plastic behavior and in external color after solar irradiation. From the evaluation of the extractable profile of untreated and treated packaging material an absorption of 2-phenoxyethanol and octocrylene were shown. In conclusion, the results highlighted clearly that a reduction of the UV filter in the formulation packed in high-density polyethylene/low-density polyethylene (HDPE/LDPE) material can occur over time, reducing the protective effect of the product when applied to the skin.

Empirical study on the link between corporate citizenship behaviour and spirituality in the corporate environment

Directory of Open Access Journals (Sweden)

Sanjana Brijball Parumasur

2016-08-01

Full Text Available This study explores the relationship between spirituality in the corporate environment and corporate or organisational citizenship behaviour. The relationships amongst the sub-dimensions of workplace spirituality (meaningfulness of work, sense of community, alignment with organisational values and the sub-dimensions of corporate or organisational citizenship behaviour (altruism, conscientiousness, sportsmanship, courtesy, civic virtue are also examined. The extent to which the sub-dimensions of organisational citizenship behaviour predict workplace spirituality are analysed. The study was undertaken in a retail products outlet that focuses on quality and professionalism. The sample was drawn using cluster sampling and the adequacy of the sample was assessed using the Kaiser-Meyer-Olkin Measure and Bartlett’s Test of Sphericity. Data was collected using a closed-ended, established questionnaire and analysed using descriptive and inferential statistics. The results reflect that the organisation is fairly high on workplace spirituality with the focus being on meaningfulness of work and, on corporate or organisational citizenship behaviour with altruism and civic virtue being its greatest strength. There is a significant relationship between spirituality in the corporate environment and corporate or organisational citizenship behaviour, with sportsmanship and civic virtue being strong predictors of workplace spirituality. The results therefore, display the dynamic relationship between spirituality in the corporate environment and corporate or organisational citizenship behaviour, which when nurtured has the potential to enhance both bottom-lines of profits and people as well as society as a whole

Development of rubidium and niobium containing plastic foams. Final report

International Nuclear Information System (INIS)

Botham, R.A.; McClung, C.E.; Schwendeman, J.I.

1978-01-01

Rubidium fluoride and niobium metal-containing foam samples (rods and sheets) were prepared using two foam sytems: (1) hydrophilic polyurethanes prepared from W.R. Grace Co.'s Hypol prepolymers and (2) polyimides prepared from Monsanto Company's Skybond polyimide resin. The first system was used only for preparation of rubidium fluoride-containing foams while the second was used for both rubidium fluoride and niobium-containing foams. The niobium metal could readily be incorporated into the polyimide foam during molding, to produce foam sheets of the required dimensions and density. The rubidium fluoride-containing polyimide foams were preferably prepared by first rendering the molded polyimide foam hydrophilic with a postcuring treatment, then absorbing the rubidium fluoride from water solution. Similarly, rubidium fluoride was absorbed into the hydrophilic polyurethanes from water solution. Since the high reactive rubidium metal could not be employed, rubidium fluoride, which is very hygroscopic, was used instead, primarily because of its high rubidium content (approximately 82 weight percent). This was important in view of the low total densities and the high weight percentage rubidium required in the foam samples. In addition, at the later request of LLL, a block of rigid Hypol hydrophilic polyurethane foam (with a density of approximately 0.04 g/cm 3 and cell sizes = or <0.2 mm) was prepared without any metal or metal compounds in it. Two shipments of foam samples, which met or closely approximated the project specifications, were submitted to LLL during the course of this project. Information on these samples is contained in Table 1. A complete description of their preparation is given in the Experimental Results and Discussion Section

A calculational round robin in elastic-plastic fracture mechanics

International Nuclear Information System (INIS)

Larsson, L.H.

Eighteen organizations participated in this round robin which treated the same three-point bend problem as an ASTM round robin four years earlier. Overall deformation, J, CTOD and crack profile were the main results required using plane strain elastic-plastic finite element analysis for a monotonically increasing load up to a maximum deformation which was far beyond the elastic regime. All elastic solutions were accurate to within a few percent. In the elastic-plastic regime, however, there was a large scatter of the results, increasing with increasing plastic deformation and roughly of the same order as in the ASTM round robin which contained ten solutions. Apparently no significant progress has taken place in the state of the art of numerical EPFM analysis in four years time. The paper discusses the reasons for this scatter and draws tentative conclusions on the most suitable numerical analysis methods in EPFM. (Auth.)

Hardening of Fe-Cr-Mn steels cold plastic working

International Nuclear Information System (INIS)

Malinov, L.S.; Konop-Lyashko, V.I.; Nikoporets, N.M.

1983-01-01

The dependence is established between the level of proper-- ties obtained after cold plastic working and development of martensite transformations when loading in Fe-Cr-Mn steels containing 0.1-0.5% C, 13% Cr, 8-12% Mn, as well as in a number of complex alloyed steels. It is shown that the highest level of mechanical properties can be obtained after cold plastic working only in steels with definite austenite stability. Cold plastic working can both activize and stabilize austenite relatively to martensite formation during loading. The first thing is found when under the effect of preliminary cold working dislocation splitting takes place, as well as the formation of a small amount of E-phase and martensite. The second thing manifests itself when under the effect of cold working performed above Md (Md<20 deg C) cell dislocation structure is formed and dislocation pinning takes place

Characterization of plastic blends made from mixed plastics waste of different sources.

Science.gov (United States)

Turku, Irina; Kärki, Timo; Rinne, Kimmo; Puurtinen, Ari

2017-02-01

This paper studies the recyclability of construction and household plastic waste collected from local landfills. Samples were processed from mixed plastic waste by injection moulding. In addition, blends of pure plastics, polypropylene and polyethylene were processed as a reference set. Reference samples with known plastic ratio were used as the calibration set for quantitative analysis of plastic fractions in recycled blends. The samples were tested for the tensile properties; scanning electron microscope-energy-dispersive X-ray spectroscopy was used for elemental analysis of the blend surfaces and Fourier transform infrared (FTIR) analysis was used for the quantification of plastics contents.

Microbial degradation of high impact polystyrene (HIPS), an e-plastic with decabromodiphenyl oxide and antimony trioxide

International Nuclear Information System (INIS)

Sekhar, Vini C.; Nampoothiri, K. Madhavan; Mohan, Arya J.; Nair, Nimisha R.; Bhaskar, Thallada; Pandey, Ashok

2016-01-01

Highlights: • Biodegradation of a high impact polystyrene e − plastic. • 12.4% (w/w) e plastic film lost using an isolate, Enterobacter sp. • Noted changes in the physico-chemical characteristics of degraded e-plastic film. • Polystyrene intermediates were detected in the degradation medium. • e-plastic degrading microbes displayed extracellular depolymerase activity. - Abstract: Accumulation of electronic waste has increased catastrophically and out of that various plastic resins constitute one of the leading thrown out materials in the electronic machinery. Enrichment medium, containing high impact polystyrene (HIPS) with decabromodiphenyl oxide and antimony trioxide as sole carbon source, was used to isolate microbial cultures. The viability of these cultures in the e-plastic containing mineral medium was further confirmed by triphenyl tetrazolium chloride (TTC) reduction test. Four cultures were identified by 16S rRNA sequencing as Enterobacter sp., Citrobacter sedlakii, Alcaligenes sp. and Brevundimonas diminuta. Biodegradation experiments were carried out in flask level and gelatin supplementation (0.1% w/v) along with HIPS had increased the degradation rate to a maximum of 12.4% (w/w) within 30 days. This is the first report for this kind of material. The comparison of FTIR, NMR, and TGA analysis of original and degraded e-plastic films revealed structural changes under microbial treatment. Polystyrene degradation intermediates in the culture supernatant were also detected using HPLC analysis. The gravity of biodegradation was validated by morphological changes under scanning electron microscope. All isolates displayed depolymerase activity to substantiate enzymatic degradation of e-plastic.

Microbial degradation of high impact polystyrene (HIPS), an e-plastic with decabromodiphenyl oxide and antimony trioxide

Energy Technology Data Exchange (ETDEWEB)

Sekhar, Vini C. [Biotechnology Division, CSIR-National Institute for Interdisciplinary Science and Technology (NIIST), Trivandrum 695 019, Kerala (India); Nampoothiri, K. Madhavan, E-mail: madhavan85@hotmail.com [Biotechnology Division, CSIR-National Institute for Interdisciplinary Science and Technology (NIIST), Trivandrum 695 019, Kerala (India); Mohan, Arya J.; Nair, Nimisha R. [Biotechnology Division, CSIR-National Institute for Interdisciplinary Science and Technology (NIIST), Trivandrum 695 019, Kerala (India); Bhaskar, Thallada [Bio-Fuels Division (BFD), CSIR-Indian Institute of Petroleum (IIP), Dehradun, Uttarakhand 248005 (India); Pandey, Ashok [Biotechnology Division, CSIR-National Institute for Interdisciplinary Science and Technology (NIIST), Trivandrum 695 019, Kerala (India)

2016-11-15

Highlights: • Biodegradation of a high impact polystyrene e − plastic. • 12.4% (w/w) e plastic film lost using an isolate, Enterobacter sp. • Noted changes in the physico-chemical characteristics of degraded e-plastic film. • Polystyrene intermediates were detected in the degradation medium. • e-plastic degrading microbes displayed extracellular depolymerase activity. - Abstract: Accumulation of electronic waste has increased catastrophically and out of that various plastic resins constitute one of the leading thrown out materials in the electronic machinery. Enrichment medium, containing high impact polystyrene (HIPS) with decabromodiphenyl oxide and antimony trioxide as sole carbon source, was used to isolate microbial cultures. The viability of these cultures in the e-plastic containing mineral medium was further confirmed by triphenyl tetrazolium chloride (TTC) reduction test. Four cultures were identified by 16S rRNA sequencing as Enterobacter sp., Citrobacter sedlakii, Alcaligenes sp. and Brevundimonas diminuta. Biodegradation experiments were carried out in flask level and gelatin supplementation (0.1% w/v) along with HIPS had increased the degradation rate to a maximum of 12.4% (w/w) within 30 days. This is the first report for this kind of material. The comparison of FTIR, NMR, and TGA analysis of original and degraded e-plastic films revealed structural changes under microbial treatment. Polystyrene degradation intermediates in the culture supernatant were also detected using HPLC analysis. The gravity of biodegradation was validated by morphological changes under scanning electron microscope. All isolates displayed depolymerase activity to substantiate enzymatic degradation of e-plastic.

The Prevalence of Cosmetic Facial Plastic Procedures among Facial Plastic Surgeons.

Science.gov (United States)

Moayer, Roxana; Sand, Jordan P; Han, Albert; Nabili, Vishad; Keller, Gregory S

2018-04-01

This is the first study to report on the prevalence of cosmetic facial plastic surgery use among facial plastic surgeons. The aim of this study is to determine the frequency with which facial plastic surgeons have cosmetic procedures themselves. A secondary aim is to determine whether trends in usage of cosmetic facial procedures among facial plastic surgeons are similar to that of nonsurgeons. The study design was an anonymous, five-question, Internet survey distributed via email set in a single academic institution. Board-certified members of the American Academy of Facial Plastic and Reconstructive Surgery (AAFPRS) were included in this study. Self-reported history of cosmetic facial plastic surgery or minimally invasive procedures were recorded. The survey also queried participants for demographic data. A total of 216 members of the AAFPRS responded to the questionnaire. Ninety percent of respondents were male ( n  = 192) and 10.3% were female ( n  = 22). Thirty-three percent of respondents were aged 31 to 40 years ( n  = 70), 25% were aged 41 to 50 years ( n  = 53), 21.4% were aged 51 to 60 years ( n  = 46), and 20.5% were older than 60 years ( n  = 44). Thirty-six percent of respondents had a surgical cosmetic facial procedure and 75% has at least one minimally invasive cosmetic facial procedure. Facial plastic surgeons are frequent users of cosmetic facial plastic surgery. This finding may be due to access, knowledge base, values, or attitudes. By better understanding surgeon attitudes toward facial plastic surgery, we can improve communication with patients and delivery of care. This study is a first step in understanding use of facial plastic procedures among facial plastic surgeons. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Perancangan Corporate Identity Astro Rent Car Surabaya

OpenAIRE

Gunardi, Yohanes Calvin; Negara, I Nengah Sudika; Aryanto, Hendro

2017-01-01

Corporate Identity merupakan hal yang krusial dalam perkembangan sebuah Perusahaan dalam segi internal maupun eksternal. Dalam membuat perancangan Corporate identity yang efektif, perancangan ini menampilkan segala teori dan ilmu yang berhubungan dengan Corporate identity. Dengan adanya perancangan ini diharapkan para pembaca mengerti betapa pentingnya peran sebuah corporate identity yang tepat dan mengena.Kata kunci: corporate identity, Astro, logo.

Examining the Relationship between Corporate Social ...

African Journals Online (AJOL)

Recently the concept of corporate social responsibility (CSR) is being ... recognize and instill CSR initiatives into their corporate culture and business ... Keywords: Corporate Social Responsibility, Financial Performance, ROA, ROE, and ROS.

Features of the content of corporate contracts

Directory of Open Access Journals (Sweden)

Elena Petrovna Gladneva

2015-09-01

Full Text Available Objective to study the legal nature to reveal the peculiarities of the subject and other essential terms of corporate contracts as a technique and means of legal regulation of corporate relations. Methods general and specific methods of cognition dialectical formal logic analysis synthesis modeling structural and systemicfunctional methods as well as comparative legal logical legal historical legal grammatical methods and systemic interpretation. Results it is concluded that the object of corporate contracts includes terms about the features of implementation of corporate rights for shares and share in capital assets conditions order of the implementation of corporate rights and approval of other actions related to company management activity reorganization and liquidation the passive duty of corporate organizations to refrain from committing any action authority arising from the nature of corporate agreements as well as the active responsibilities associated with the certain implementation of corporate rights certified by stocks shares rights to stocks shares. In addition to the subject the content of corporate contractsincludes other essential necessary conditions stipulated by the corporate legislation norms and the agreement of the participants of economic entity. Scientific novelty for the first time taking into account modern achievements of civilistic jurisprudence and practice the authors investigate the relationship between the concepts of a civil contract and corporate contract give the definition of corporate contract show the specificity of the subject and other material terms of corporate contracts. Practical significance the findings can be taken into account in the further research of corporate law issues as subbranch of civil law used in law making and enforcement activities in the educational process as a teaching material in civil law. nbsp

Corporate Language and Corporate Talk

DEFF Research Database (Denmark)

Zølner, Mette

2013-01-01

The article presents the case studies of two Danish based multinational companies (MNCs) which provides the an insight into the role of languages in organizational learning. It mentions that the studies focus on the sharing of the understanding and practices among their employees across the geogr......The article presents the case studies of two Danish based multinational companies (MNCs) which provides the an insight into the role of languages in organizational learning. It mentions that the studies focus on the sharing of the understanding and practices among their employees across...... the geographical borders by the medium of common corporate values for knowledge management, collection of data and analysis in these studies inspired by approach of ground theory and presents a usefulness of distinguishing between corporate language and talks to enable the headquarters learning. Also it concludes...... that both of the MNCs are of Danish origin but executives of both companies are proficient in English language....

Aligning corporate real estate with the corporate strategies of higher education institutions

NARCIS (Netherlands)

Beckers, R; van der Voordt, Theo; Dewulf, G

2015-01-01

Purpose
The purpose of this paper is to explore how corporate real estate (CRE) managers of higher education institutions formulate their CRE strategies and CRE operating decisions to align CRE with the corporate strategies of these institutions.

Design/methodology/approach
An