WorldWideScience

Sample records for plant combustion techniques

  1. Air pollution emission reduction techniques in combustion plants; Technique de reduction des emissions de polluants atmospheriques dans les installations de combustion

    Energy Technology Data Exchange (ETDEWEB)

    Bouscaren, R. [CITEPA, Centre Interprofessionnel Technique d`Etudes de la Pollution Atmospherique, 75 - Paris (France)

    1996-12-31

    Separating techniques offer a large choice between various procedures for air pollution reduction in combustion plants: mechanical, electrical, filtering, hydraulic, chemical, physical, catalytic, thermal and biological processes. Many environment-friendly equipment use such separating techniques, particularly for dust cleaning and fume desulfurizing and more recently for the abatement of volatile organic pollutants or dioxins and furans. These processes are briefly described

  2. On the need for new continues measurement techniques at combustion plants; Anlaeggningars behov av ny kontinuerlig maetteknik

    Energy Technology Data Exchange (ETDEWEB)

    Eskilsson, David; Samuelsson, Jessica [Swedish National Testing and Research Inst., Boraas (Sweden)

    2006-11-15

    The purpose of this study is to make an inventory regarding the need for new continuous measurement techniques at combustion plants in Sweden. In total 15 interviews at 15 different combustion plants were made. The interviewed plants are of different sizes and use different combustion techniques, fuels, and cleaning equipments. They thereby well reflect the combustion plants present in Sweden today. Among many interesting interview results, we chose to highlight: Continuous measurement of the moisture content of the fuel, which can be used to decide the value of a fuel delivery, or for monitoring or to controlling the combustion (e.g. the speed of the grate); Continuous measurement of the heating value of the fuel, which can be used to decide the value of a fuel delivery, or for monitoring or to controlling the combustion. There is a need for temperature sensors which better withstand the environment in the furnace. Moreover, there is also a need for 3-dimensional measurements of the temperature in the furnace, especially for fluidized beds. This information can be used to control the combustion in different ways, e.g. preventing the bed from sintering. At some plants there was a need to measure the rate of corrosion and the growth of deposits. The measurements can be used to control the fuel mix at an early stage and to thereby avoid problems caused by corrosion and deposits. The measurement results can also be used to control the soot cleaning equipment, fuel mixture and adding of additive. At some of the interviewed plants there was a need to continuously measure the amount of unburned fuel in the ash. The continuous measurement results can be used for automatic control or monitoring of the combustion process. Several plants had problems with their dust instruments. Suitable topics for future work include investigating how the measurement techniques mentioned above may be developed/improved and implemented at the plants.

  3. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOx, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins, HCB and PAH. The CO2 emission in 2007 was 10...... incineration plants. The combustion of wood in residential plants has increased considerably in recent years resulting in increased emission of PAH, particulate matter and CO. The emission of NMVOC has increased since 1990 as a result of both the increased combustion of wood in residential plants...... and the increased emission from lean-burn gas engines. The dioxin emission decreased since 1990 due to flue gas cleaning on waste incineration plants. However in recent years the emission has increased as a result of the increased combustion of wood in residential plants....

  4. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOx, NMVOC, CH4, CO, CO2, N2O, NH3, particulate matter, heavy metals, dioxins, HCB and PAH. The CO2 emission in 2008...... incineration plants. The combustion of wood in residential plants has increased considerably in recent years resulting in increased emission of PAH, particulate matter and CO. The emission of NMVOC has increased since 1990 as a result of both the increased combustion of wood in residential plants...... and the increased emission from lean-burn gas engines. The dioxin emission decreased since 1990 due to flue gas cleaning on waste incineration plants. However in recent years the emission has increased as a result of the increased combustion of wood in residential plants....

  5. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOx, NMVOC, CH4, CO, CO2, N2O, NH3, particulate matter, heavy metals, PCDD/F, HCB and PAH. The CO2 emission in 2011...... of decreased emissions from large power plants and waste incineration plants. The combustion of wood in residential plants has increased considerably until 2007 resulting in increased emission of PAH and particulate matter. The emission of NMVOC has increased since 1990 as a result of both the increased...... combustion of wood in residential plants and the increased emission from lean-burn gas engines. The PCDD/F emission decreased since 1990 due to flue gas cleaning on waste incineration plants....

  6. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOx, NMVOC, CH4, CO, CO2, N2O, NH3, particulate matter, heavy metals, dioxins, HCB and PAH. The CO2 emission in 2008...... incineration plants. The combustion of wood in residential plants has increased considerably in recent years resulting in increased emission of PAH, particulate matter and CO. The emission of NMVOC has increased since 1990 as a result of both the increased combustion of wood in residential plants...... was 16 % lower than in 1990. However, fluctuations in the emission level are large as a result of electricity import/export. The emission of CH4 has increased due to increased use of lean-burn gas engines in combined heating and power (CHP) plants. However, the emission has decreased in recent years due...

  7. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOx, NMVOC, CH4, CO, CO2, N2O, NH3, particulate matter, heavy metals, PCDD/F, HCB and PAH. The CO2 emission in 2011...... of decreased emissions from large power plants and waste incineration plants. The combustion of wood in residential plants has increased considerably until 2007 resulting in increased emission of PAH and particulate matter. The emission of NMVOC has increased since 1990 as a result of both the increased...... was 30 % lower than in 1990. However, fluctuations in the emission level are large as a result of electricity import/export. The emission of CH4 has increased due to increased use of lean-burn gas engines in combined heating and power (CHP) plants. In recent years, the emission has declined. This is due...

  8. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, M.; Illerup, J. B.

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOX, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins and PAH. Since 1990 the fuel consumption...... in stationary combustion has increased by 14% - the fossil fuel consumption however only by 8%. Despite the increased fuel consumption the emission of several pollutants has decreased due to the improved flue gas cleaning technology, improved burner technology and the change of fuel type used. A considerable...... plants. The emission of PAH increased as a result of the increased combustion of wood in residential boilers and stoves. Uncertainties for the emissions and trends have been estimated...

  9. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, M.; Illerup, J. B.

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are: SO2, NOx, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins and PAH. Since 1990 the fuel consumption...... in stationary combustion has increased by 12% - the fossil fuel consumption however only by 6%. Despite the increased fuel consumption the emission of several pollutants have decreased due to the improved flue gas cleaning technology, improved burner technology and the change of fuel type used. A considerable...... plants. The emission of PAH increased as a result of the increased combustion of wood in residential boilers and stoves. Uncertainties for the emissions and trends have been estimated....

  10. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, M.; Illerup, J. B.

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOX, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins and PAH. Since 1990 the fuel consumption...... in stationary combustion has increased by 14% - the fossil fuel consumption however only by 8%. Despite the increased fuel consumption the emission of several pollutants has decreased due to the improved flue gas cleaning technology, improved burner technology and the change of fuel type used. A considerable...... decrease of the SO2, NOX and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The greenhouse gas emission has decreased 1,3% since 1990. The emission of CH4, however, has increased due to increased use of lean-burn gas engines in CHP...

  11. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, M.; Illerup, J. B.

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are: SO2, NOx, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins and PAH. Since 1990 the fuel consumption...... in stationary combustion has increased by 12% - the fossil fuel consumption however only by 6%. Despite the increased fuel consumption the emission of several pollutants have decreased due to the improved flue gas cleaning technology, improved burner technology and the change of fuel type used. A considerable...... decrease of the SO2, NOx and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The greenhouse gas emission has decreased 1,5% since 1990. The emission of CH4, however, has increased due to increased use of lean-burn gas engines in CHP...

  12. Plants for combustion of solid waste

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-15

    Most of all domestic and other scrap is treated in waste combustion plants. The report gives the basis for an estmation of the possibility of increased heat utilization from combustion, including the quantity of scrap and its composition. The planning of utilization of scrap, the legalization together with environmental aspects are mentioned. The figure of existing plants, their heat production and siting are given. Fuel conservation is analysed, first of all the decreasing use of petroleum, which is expected to be 1.6% of the gross energy consumption for heating in 1979, increasing to 3.1% in 1985. The investments and operational problems are also analysed. At last alternative uses of scrap are mentioned, together with problems of the fitting in of the plants in the heat supply.

  13. Plant tissue culture techniques

    Directory of Open Access Journals (Sweden)

    Rolf Dieter Illg

    1991-01-01

    Full Text Available Plant cell and tissue culture in a simple fashion refers to techniques which utilize either single plant cells, groups of unorganized cells (callus or organized tissues or organs put in culture, under controlled sterile conditions.

  14. Plant tissue culture techniques

    OpenAIRE

    Rolf Dieter Illg

    1991-01-01

    Plant cell and tissue culture in a simple fashion refers to techniques which utilize either single plant cells, groups of unorganized cells (callus) or organized tissues or organs put in culture, under controlled sterile conditions.

  15. Danish emission inventories for stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, Marlene Schmidt

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOx, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins, HCB and PAH. The CO2 emission in 2007 was 10......% lower than in 1990. However fluctuations in the emission level are large as a result of electricity import/export. The emission of CH4 has increased due to increased use of lean-burn gas engines in combined heating and power (CHP) plants. However the emission has decreased in recent years due...... to structural changes in the Danish electricity market. The N2O emission was higher in 2007 than in 1990 but the fluctuations in the time-series are significant. A considerable decrease of the SO2, NOx and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste...

  16. Improved inventory for heavy metal emissions from stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Hoffmann, Leif

    for stationary combustion plants and the corresponding improved emission inventories for the following HMs: Arsenic (As), Cadmium (Cd), Chromium (Cr), Copper (Cu), Mercury (Hg), Nickel (Ni), Lead (Pb), Selenium (Se) and Zinc (Zn). The report presents data for the year 2009 and time series for 1990......-2009. The report also include methodology, references and an uncertainty estimate. In Denmark, stationary combustion plants are among the most important emission sources for heavy metals. Emissions of all heavy metals have decreased considerably (73 % - 92 %) since 1990. The main HM emission sources are coal...... combustion, waste incineration, residual oil combustion and in 2009 also combustion of biomass. The emission from waste incineration plants has decreased profoundly also in recent years due to installation and improved performance of flue gas cleaning devices. The emission from power plants have also...

  17. Improved inventory for heavy metal emissions from stationary combustion plants

    DEFF Research Database (Denmark)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Hoffmann, Leif

    for stationary combustion plants and the corresponding improved emission inventories for the following HMs: Arsenic (As), Cadmium (Cd), Chromium (Cr), Copper (Cu), Mercury (Hg), Nickel (Ni), Lead (Pb), Selenium (Se) and Zinc (Zn). The report presents data for the year 2009 and time series for 1990......-2009. The report also include methodology, references and an uncertainty estimate. In Denmark, stationary combustion plants are among the most important emission sources for heavy metals. Emissions of all heavy metals have decreased considerably (73 % - 92 %) since 1990. The main HM emission sources are coal...... combustion, waste incineration, residual oil combustion and in 2009 also combustion of biomass. The emission from waste incineration plants has decreased profoundly also in recent years due to installation and improved performance of flue gas cleaning devices. The emission from power plants have also...

  18. Scaling Techniques for Combustion Device Random Vibration Predictions

    Science.gov (United States)

    Kenny, R. J.; Ferebee, R. C.; Duvall, L. D.

    2016-01-01

    This work presents compares scaling techniques that can be used for prediction of combustion device component random vibration levels with excitation due to the internal combustion dynamics. Acceleration and unsteady dynamic pressure data from multiple component test programs are compared and normalized per the two scaling approaches reviewed. Two scaling technique are reviewed and compared against the collected component test data. The first technique is an existing approach developed by Barrett, and the second technique is an updated approach new to this work. Results from utilizing both techniques are presented and recommendations about future component random vibration prediction approaches are given.

  19. EXPERIMENTAL STUDY ON HORIZONTAL COMBUSTION TECHNIQUE FOR BITUMINOUS COAL BRIQUET

    Institute of Scientific and Technical Information of China (English)

    路春美; 程世庆; 邵延玲; 张晔

    1997-01-01

    Through a lot of experiments, a new kind of stove using horizontal combustion technique for bituminous coal briquet has been developed. Making use of this stove, studies have been made on burning process of bituminous coal briquet, distribution of temperature field in the stove, the regularities of evolution and combustion of volatile matter, the burning rate and efficiency of bituminous coal briquet, characteristics of fire-sealing and sulfur-retention. The results show that, with the technique, some achievements can be obtained in combustion of bituminous coal briquet, such as lower pollution that the flue gas black degree is below 0.5R and dust concentration is below 90mg/m3 . The stove's combustion efficiency reaches 90%, sulfur fixing efficiency is 60%, and CO concentration is decreased by 40% compared with other traditional stoves. With so many advantages, the stove can be used extensively in civil stoves and smaller industrial boilers.

  20. Co-combustion of solid recovered fuels in coal-fired power plants.

    Science.gov (United States)

    Thiel, Stephanie; Thomé-Kozmiensky, Karl Joachim

    2012-04-01

    Currently, in ten coal-fired power plants in Germany solid recovered fuels from mixed municipal waste and production-specific commercial waste are co-combusted and experiments have been conducted at other locations. Overall, in 2010 approximately 800,000 tonnes of these solid recovered fuels were used. In the coming years up to 2014 a slight decline in the quantity of materials used in co-combustions is expected. The co-combustion activities are in part significantly influenced by increasing power supply from renewable sources of energy and their impact on the regime of coal-fired power plants usage. Moreover, price trends of CO₂ allowances, solid recovered fuels as well as imported coal also have significant influence. In addition to the usage of solid recovered fuels with biogenic content, the co-combustion of pure renewable biofuels has become more important in coal-fired power plants. The power plant operators make high demands on the quality of solid recovered fuels. As the operational experience shows, a set of problems may be posed by co-combustion. The key factors in process engineering are firing technique and corrosion. A significant ecological key factor is the emission of pollutants into the atmosphere. The results of this study derive from research made on the basis of an extensive literature search as well as a survey on power plant operators in Germany. The data from operators was updated in spring 2011.

  1. Topping PCFB combustion plant with supercritical steam pressure

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, A. [Foster Wheeler Development Corp., Livingston, NJ (United States); White, J. [Parsons Power Group Inc., Reading, PA (United States)

    1997-11-01

    Research is being conducted to develop a new type of coal fired plant for electric power generation. This new type of plant, called a second generation or topping pressurized circulating fluidized bed combustion (topping PCFB) plant, offers the promise of efficiencies greater than 46 percent (HHV), with both emissions and a cost of electricity that are significantly lower than conventional pulverized coal fired plants with scrubbers. The topping PCFB plant incorporates the partial gasification of coal in a carbonizer, the combustion of carbonizer char in a pressurized circulating fluidized bed combustor (PCFB), and the combustion of carbonizer fuel gas in a topping combustor to achieve gas turbine inlet temperatures of 2,300 F and higher. After completing pilot plant tests of a carbonizer, a PCFB, and a gas turbine topping combustor, all being developed for this new plant, the authors calculated a higher heating value efficiency of 46.2 percent for the plant. In that analysis, the plant operated with a conventional 2,400 psig steam cycle with 1,000 F superheat and reheat steam and a 2.5 inch mercury condenser back pressure. This paper identifies the efficiency gains that this plant will achieve by using supercritical pressure steam conditions.

  2. Optimized post-combustion capture technology for power plants

    Energy Technology Data Exchange (ETDEWEB)

    Peter Moser; Sandra Schmidt; Georg Sieder; Hugo Garcia; Ilaria Ciattaglia; Dieter Mihailowitsch; Torsten Stoffregen [RWE Power AG, New Technologies, Essen (Germany)

    2009-07-01

    The construction and operation of the post-combustion capture pilot plant at RWE Power's lignite-fired power plant at Niederaussem is the first corner stone in a joint development programme of RWE Power, BASF and Linde that started in 2007. The pilot plant will be commissioned in mid-2009. The skid-mounted pilot plant - engineering, procurement and construction by procurement and construction by Linde - comprises all significant components of a large post-combustion capture plant but on a smaller scale. In the 18-month pilot plant testing programme optimized new solvents for the capture process will be evaluated. These solvents were selected by BASF in a multi-step procedure, starting with a pre-selection, followed by lab-screening, and finalized by mini plant runs. The pilot plant will validate the performance of some capture process optimization measures that are implemented to increase the overall efficiency and reduce the costs of a commercial capture plant. The results of the pilot plant testing will be directly used to optimize the capture process configuration for a base case power plant, a 1,100 MW lignite-fired power plant with lignite pre-drying technology. The development of the commercial capture plant needs an accurate analysis of all process steps to achieve a cost efficient plant design. Apart from energy efficiency, cost-effective equipment and the optimization of plant interfaces and plant configuration are also key factors to reach the ambitious goals of this project. Based on the results of the pilot plant tests and the full-scale design study, a demonstration plant concept will be developed to prove all innovative optimization measures and to avoid the risks involved in direct up-scaling from the pilot plant to the commercial plant scale without an intermediate step. 8 figs.

  3. Prevention of spontaneous combustion of backfilled plant waste material.

    CSIR Research Space (South Africa)

    Adamski, SA

    2003-06-01

    Full Text Available Since Grootegeluk Coal Mine commenced operation in 1980 all plant discards and inter-burden material have been stacked on discards dumps, a practice that has led to the spontaneous combustion of the waste material on these dumps. From 1980 to 1988...

  4. Danish emission inventories for stationary combustion plants. Inventories until 2008

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, M.; Hjelgaard, K.

    2010-10-15

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO{sub 2}, NO{sub x}, NMVOC, CH{sub 4}, CO, CO{sub 2}, N{sub 2}O, NH{sub 3}, particulate matter, heavy metals, dioxins, HCB and PAH. The CO{sub 2} emission in 2008 was 16 % lower than in 1990. However, fluctuations in the emission level are large as a result of electricity import/export. The emission of CH{sub 4} has increased due to increased use of lean-burn gas engines in combined heating and power (CHP) plants. However, the emission has decreased in recent years due to structural changes in the Danish electricity market. The N{sub 2}O emission was higher in 2008 than in 1990 but the fluctuations in the time-series are significant. A considerable decrease of the SO{sub 2}, NO{sub x} and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The combustion of wood in residential plants has increased considerably in recent years resulting in increased emission of PAH, particulate matter and CO. The emission of NMVOC has increased since 1990 as a result of both the increased combustion of wood in residential plants and the increased emission from lean-burn gas engines. The dioxin emission decreased since 1990 due to flue gas cleaning on waste incineration plants. However in recent years the emission has increased as a result of the increased combustion of wood in residential plants. (Author)

  5. Method of reducing CO in combustion plant, particularly in fluidized bed combustion plant. Verfahren zur Reduzierung von CO bei Verbrennungsanlagen, insbesondere bei Wirbelbettfeuerungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hoelter, H.; Igelbuescher, H.; Gresch, H.; Dewert, H.

    1989-05-10

    The invention describes a method of reducing the development of CO in combustion plant, particularly fluidised combustion plant, characterised in that the air is introduced in a heated condition at the points where increased CO concentrations are measured, the air being heated in tube bundles, these tube bundles being formed in such a manner as to cause an impact precipitative effect in the form of an impact precipitative arrangement at the proportioned fuel input of fluidised bed combustion plant.

  6. Innovative oxy-coal combustion process suitable for future and more efficient zero emission power plants

    Energy Technology Data Exchange (ETDEWEB)

    Benelli, G.; Malavasi, M.; Girardi, G. [ENEL Ricerca (Italy)

    2007-07-01

    The problem with CO{sub 2} capture from a flue gas stream is related to its low concentration, which makes the process of separation very energy-intensive, complex and, as a result, expensive. The CO{sub 2} separation process can be optimized by increasing the concentration of CO{sub 2} and reducing nitrogen concentration in the stream as it happens, in the oxy-fuel combustion process. In such a case, the oxidant flow is typically a mixture of oxygen, steam and carbon dioxide, with a very low concentration of nitrogen. Since the oxy-combustion process leads to very high temperatures, flue gases must be circulating through the chemical reactor to keep the combustion adiabatic temperature below acceptable values, due to the limits imposed by material resistance. This paper focuses on an innovative oxy-coal combustion process named ISOTHERM{reg_sign}, based on a flameless combustion technique which is mentioned in recent literature also as 'Mild' combustion. The combustion process takes place within a pressurized and refractory-lined furnace, approaching temperatures close to 2000 K. The process has been experienced at pressurized conditions up to 4 bar on a 5 MW pilot plant for thousands of hours. In this paper, starting from a detailed description of the process, results obtained by the preliminary experimental tests are presented and discussed. Then, a development and demonstration program to assess the suitability of this technology for zero emission power generation at large scale in one of the units of Brindisi power station is presented. 10 refs., 5 figs., 2 tabs.

  7. Combustion study with synchrotron radiation single photon ionization technique

    Institute of Scientific and Technical Information of China (English)

    YANG Rui; WANG Jing; HUANG Chaoqun; YANG Bin; WEI Lixia; SHAN Xiaobin; SHENG Liusi; ZHANG Yunwu; QI Fei

    2005-01-01

    Here we report a combustion endstation at National Synchrotron Radiation Laboratory (NSRL) and some primary experimental results. Synchrotron radiation can provide the tunable vacuum ultraviolet (VUV) photon with the high intensity and the good collimation. VUV photoionization is a single-photon ionization process. Combined with molecular-beam mass spectrometry (MBMS), the VUV single-photon ionization can be applied to detect the combustion products, especially the intermediates and free radicals produced from combustion process. This method is proved to be a powerful tool for combustion study, which could be helpful for developing combustion kinetic models and understanding the mechanism of combustion reactions.

  8. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Clifford E. Smith; Steven M. Cannon; Virgil Adumitroaie; David L. Black; Karl V. Meredith

    2005-01-01

    In this project, an advanced computational software tool was developed for the design of low emission combustion systems required for Vision 21 clean energy plants. Vision 21 combustion systems, such as combustors for gas turbines, combustors for indirect fired cycles, furnaces and sequestrian-ready combustion systems, will require innovative low emission designs and low development costs if Vision 21 goals are to be realized. The simulation tool will greatly reduce the number of experimental tests; this is especially desirable for gas turbine combustor design since the cost of the high pressure testing is extremely costly. In addition, the software will stimulate new ideas, will provide the capability of assessing and adapting low-emission combustors to alternate fuels, and will greatly reduce the development time cycle of combustion systems. The revolutionary combustion simulation software is able to accurately simulate the highly transient nature of gaseous-fueled (e.g. natural gas, low BTU syngas, hydrogen, biogas etc.) turbulent combustion and assess innovative concepts needed for Vision 21 plants. In addition, the software is capable of analyzing liquid-fueled combustion systems since that capability was developed under a concurrent Air Force Small Business Innovative Research (SBIR) program. The complex physics of the reacting flow field are captured using 3D Large Eddy Simulation (LES) methods, in which large scale transient motion is resolved by time-accurate numerics, while the small scale motion is modeled using advanced subgrid turbulence and chemistry closures. In this way, LES combustion simulations can model many physical aspects that, until now, were impossible to predict with 3D steady-state Reynolds Averaged Navier-Stokes (RANS) analysis, i.e. very low NOx emissions, combustion instability (coupling of unsteady heat and acoustics), lean blowout, flashback, autoignition, etc. LES methods are becoming more and more practical by linking together tens

  9. Modern fluidized bed combustion in Ostrava-Karvina cogeneration plants

    Energy Technology Data Exchange (ETDEWEB)

    Mazac, V. [Energoprojekt Praha, Ostrava (Czechoslovakia); Novacek, A. [Moravskoslezske teplamy, Ostrava (Czechoslovakia); Volny, J. [Templamy Karvina (Czechoslovakia)

    1995-12-01

    The contemporary situation of our environment claims the sensitive approach to solving effective conversion of energy. Limited supplies of noble fuels and their prices evoke the need to use new combustion technologies of accessible fuels in given region without negative ecological influences. Energoproject participates in the preparation of the two projects in Ostrava-Karvin{acute a} black coal field in Czech Republic. The most effective usage of fuel energy is the combined of electricity and heat. If this physical principle is supported by a pressurized fluidized bed combustion (PFBC) one obtains a high electricity/heat ratio integrated steam-gas cycle on the basis of solid fuel. Cogeneration plant Toebovice is the dominant source (600 MW{sub th}) of Ostrava district heating system (1100 MW{sub th}). The high utilization of the installed output and utilization of the clean, compact and efficient of the PFBC technology is the principal but not the single reason for the selection of the Toebovice power plant as the first cogeneration plant for installation of the PFBC in Czech Republic. The boiler will burn black coal from the neighboring coal basin.

  10. Atmospheric fluidized bed combustion (AFBC) plants: A performance benchmarking study

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, J. A.; Beavers, H.; Bonk, D. [West Virginia University, College of Business and Economics, Division of Business Administration, Morgantown, WV (United States)

    2004-03-31

    Data from a fluidized bed boiler survey distributed during the spring of 2000 to gather data for developing atmospheric fluidized bed combustion (AFCB) performance benchmarks are analyzed. The survey was sent to members of the Council of Industrial Boiler Owners; 35 surveys were usable for analysis. A total of 18 benchmarks were considered. While the results were not such as to permit a definitive set of conclusions, the survey was successful in providing practical information to assist plant owners, operators and developers to understand their operations and to assess potential solutions or to establish preventative maintenance programs. 36 refs., 2 tabs.

  11. Resonant laser techniques for combustion and flow diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Fritzon, Rolf

    1998-05-01

    This thesis presents results from two areas of research. Firstly, the resonant coherent laser techniques polarization spectroscopy (PS), degenerate four-wave mixing (DFWM) and stimulated emission (SE) have been developed in the general field of combustion diagnostics. Secondly, laser induced fluorescence (LIF) has been developed and applied for the visualization of mixture fractions in turbulent non reacting flows. PS was developed for instantaneous two-dimensional imaging of minor species in flames, the technique being demonstrated on OH and NO. Various aspects of imaging and of detection in general were investigated. Two-photon induced PS was demonstrated for the detection of NH{sub 3}, CO and N{sub 2} molecules. LIF was monitored simultaneously to allow a quantitative comparison between the techniques. Furthermore, PS and DFWM were developed for instantaneous two-dimensional OH temperature imaging. Through a novel experimental approach based on the use of a dual-wavelength dye laser and a diffraction grating the temperature imaging measurements were performed using only one laser and one CCD camera. A comparison between the two techniques was made. SE was through a crossed-beam arrangement developed for spatially resolved detection of flame species. Two-dimensional LIF was developed and applied for measuring mixture fractions in the shear layer between two co-flowing turbulent gaseous jets. The technique was further applied in a study of the mixing of a turbulent water jet impinging orthogonally onto a flat surface. Average concentration fields in the center-plane of the jet was compared with results from large eddy simulations and with data from the literature 221 refs, 48 figs, 5 tabs

  12. Combustion

    CERN Document Server

    Glassman, Irvin

    1987-01-01

    Combustion, Second Edition focuses on the underlying principles of combustion and covers topics ranging from chemical thermodynamics and flame temperatures to chemical kinetics, detonation, ignition, and oxidation characteristics of fuels. Diffusion flames, flame phenomena in premixed combustible gases, and combustion of nonvolatile fuels are also discussed. This book consists of nine chapters and begins by introducing the reader to heats of reaction and formation, free energy and the equilibrium constants, and flame temperature calculations. The next chapter explores the rates of reactio

  13. Reducing the cost of post combustion capture technology for pulverized coal power plants by flexible operation

    NARCIS (Netherlands)

    Kler, R.C.F. de; Verbaan, M.; Goetheer, E.L.V.

    2013-01-01

    Currently the low carbon prices, low Spreads and regulatory uncertainties hampers the business cases for coal-fired power plants with post-combustion capture (PCC) in Europe. Improvement of the business case of coal-fired power plants with post combustion capture requires a different approach in

  14. Reducing the cost of Post Combustion Capture technology for Pulverized Coal Power Plants by flexible operation

    NARCIS (Netherlands)

    De Kler, R.C.F.; Verbaan, M.; Goetheer, E.L.V.

    2013-01-01

    Currently the low carbon prices, low Spreads and regulatory uncertainties hampers the business cases for coal-fired power plants with post-combustion capture (PCC) in Europe. Improvement of the business case of coal-fired power plants with post combustion capture requires a different approach in

  15. Reducing the cost of Post Combustion Capture technology for Pulverized Coal Power Plants by flexible operation

    NARCIS (Netherlands)

    De Kler, R.C.F.; Verbaan, M.; Goetheer, E.L.V.

    2013-01-01

    Currently the low carbon prices, low Spreads and regulatory uncertainties hampers the business cases for coal-fired power plants with post-combustion capture (PCC) in Europe. Improvement of the business case of coal-fired power plants with post combustion capture requires a different approach in ter

  16. The recovery of waste and off-gas in Large Combustion Plants subject to IPPC National Permit in Italy.

    Science.gov (United States)

    Di Marco, Giuseppe; Manuzzi, Raffaella

    2017-08-14

    The recovery of off-gas, waste, and biomass in Large Combustion Plants for energy production gives the opportunity to recycle waste and by-products and to recover materials produced in agricultural and industrial activities. The paper illustrates the Italian situation regarding the production of energy from off-gas, biomass, and waste in Large Combustion Plants subject to Integrated Pollution Prevention and Control (IPPC) National Permit. Moreover, it focuses on the 4 Italian Large Combustion Plants producing energy from biomass and waste. For these ones it illustrates the specific issues related to and provides a description of the solutions adopted in the 4 Italian plants. Given that air emission performance is the most relevant aspect of this kind of plants, the paper specifically focuses and reports results about this subject. In particular, in Italy among 113 LCPs subject to IPPC National Permit we have found that 4 plants use as fuel waste (i.e. solid or liquid biomasses and Solid Recovered Fuels), or a mixture of waste and traditional fuels (co-combustion of Solid Recovered Fuels and coal), and that 11 plants use as fuel off-gases listed in Annex X (i.e. Refinery Fuel Gas, Syngas, and gases produced in iron and steel industries). Moreover, there are 2 IPPC chemical plants that recovery energy from different off-gases not listed in Annex X. Regarding the 4 LCPs that produce energy from waste combustion or co-combustion, we find that they take into account all the specific issues related to this kind of plants (i.e. detailed waste characterization, waste acceptance procedures, waste handling and storage, waste pretreatment and emissions to air), and adopt solutions that are best available techniques to prevent pollution. Moreover for one of these plants, the only one for which we have a significant set of monitoring data because it obtained the IPPC National Permit in 2008, we find that energy efficiency and air emissions of the principal pollutants are in

  17. Tunable diode laser spectroscopy as a technique for combustion diagnostics

    Energy Technology Data Exchange (ETDEWEB)

    Bolshov, M.A., E-mail: bolshov@isan.troitsk.ru; Kuritsyn, Yu.A.; Romanovskii, Yu.V.

    2015-04-01

    Tunable diode laser absorption spectroscopy (TDLAS) has become a proven method of rapid gas diagnostics. In the present review an overview of the state of the art of TDL-based sensors and their applications for measurements of temperature, pressure, and species concentrations of gas components in harsh environments is given. In particular, the contemporary tunable diode laser systems, various methods of absorption detection (direct absorption measurements, wavelength modulation based phase sensitive detection), and relevant algorithms for data processing that improve accuracy and accelerate the diagnostics cycle are discussed in detail. The paper demonstrates how the recent developments of these methods and algorithms made it possible to extend the functionality of TDLAS in the tomographic imaging of combustion processes. Some prominent examples of applications of TDL-based sensors in a wide range of practical combustion aggregates, including scramjet engines and facilities, internal combustion engines, pulse detonation combustors, and coal gasifiers, are given in the final part of the review. - Highlights: • Overview of modern TDL-based sensors for combustion • TDL systems, methods of absorption detection and algorithms of data processing • Prominent examples of TDLAS diagnostics of the combustion facilities • Extension of the TDLAS on the tomographic imaging of combustion processes.

  18. The development of an electrochemical technique for in situ calibrating of combustible gas detectors

    Science.gov (United States)

    Shumar, J. W.; Lantz, J. B.; Schubert, F. H.

    1976-01-01

    A program to determine the feasibility of performing in situ calibration of combustible gas detectors was successfully completed. Several possible techniques for performing the in situ calibration were proposed. The approach that showed the most promise involved the use of a miniature water vapor electrolysis cell for the generation of hydrogen within the flame arrestor of a combustible gas detector to be used for the purpose of calibrating the combustible gas detectors. A preliminary breadboard of the in situ calibration hardware was designed, fabricated and assembled. The breadboard equipment consisted of a commercially available combustible gas detector, modified to incorporate a water vapor electrolysis cell, and the instrumentation required for controlling the water vapor electrolysis and controlling and calibrating the combustible gas detector. The results showed that operation of the water vapor electrolysis at a given current density for a specific time period resulted in the attainment of a hydrogen concentration plateau within the flame arrestor of the combustible gas detector.

  19. New environment-compatible heat-power plant Moabit with circulating fluidized-bed combustion

    Energy Technology Data Exchange (ETDEWEB)

    Bade, H.; Kuenisch, H.J.

    1987-06-09

    The authors report on the optimal utilisation of a city location for generating power and heat in a heat-power plant using circulating atmospheric fluidized-bed combustion. Because fluidized-bed combustion eliminates the need for secondary flue gas scrubbing equipment, the construction is highly compact. Also, this type of plant produces no waste water, so there is no disposal problem. Taking all aspects into consideration, circulating fluidized-bed combustion is especially interesting for heat-power plants in municipal areas with electrical block outputs of between 100 and 200 MW.

  20. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Clifford E. Smith; Steven M. Cannon; Virgil Adumitroaie; David L. Black; Karl V. Meredith

    2005-01-01

    In this project, an advanced computational software tool was developed for the design of low emission combustion systems required for Vision 21 clean energy plants. Vision 21 combustion systems, such as combustors for gas turbines, combustors for indirect fired cycles, furnaces and sequestrian-ready combustion systems, will require innovative low emission designs and low development costs if Vision 21 goals are to be realized. The simulation tool will greatly reduce the number of experimental tests; this is especially desirable for gas turbine combustor design since the cost of the high pressure testing is extremely costly. In addition, the software will stimulate new ideas, will provide the capability of assessing and adapting low-emission combustors to alternate fuels, and will greatly reduce the development time cycle of combustion systems. The revolutionary combustion simulation software is able to accurately simulate the highly transient nature of gaseous-fueled (e.g. natural gas, low BTU syngas, hydrogen, biogas etc.) turbulent combustion and assess innovative concepts needed for Vision 21 plants. In addition, the software is capable of analyzing liquid-fueled combustion systems since that capability was developed under a concurrent Air Force Small Business Innovative Research (SBIR) program. The complex physics of the reacting flow field are captured using 3D Large Eddy Simulation (LES) methods, in which large scale transient motion is resolved by time-accurate numerics, while the small scale motion is modeled using advanced subgrid turbulence and chemistry closures. In this way, LES combustion simulations can model many physical aspects that, until now, were impossible to predict with 3D steady-state Reynolds Averaged Navier-Stokes (RANS) analysis, i.e. very low NOx emissions, combustion instability (coupling of unsteady heat and acoustics), lean blowout, flashback, autoignition, etc. LES methods are becoming more and more practical by linking together tens

  1. Development of a 2D temperature measurement technique for combustion diagnostics using 2-line atomic fluorescence

    Energy Technology Data Exchange (ETDEWEB)

    Engstroem, Johan

    2001-01-01

    The present thesis is concerned with the development and application of a novel planar laser-induced fluorescence (PLIF) technique for temperature measurements in a variety of combusting flows. Accurate measurement of temperature is an essential task in combustion diagnostics, since temperature is one of the most fundamental quantities for the characterization of combustion processes. The technique is based on two-line atomic fluorescence (TLAF) from small quantities of atomic indium (In) seeded into the fuel. It has been developed from small-scale experiments in laboratory flames to the point where practical combustion systems can be studied. The technique is conceptually simple and reveals temperature information in the post-flame regions. The viability of the technique has been tested in three extreme measurement situations: in spark ignition engine combustion, in ultra-lean combustion situations such as lean burning aero-engine concepts and, finally, in fuel-rich combustion. TLAF was successfully applied in an optical Sl engine using isooctane as fuel. The wide temperature sensitivity, 700 - 3000 K, of the technique using indium atoms allowed measurements over the entire combustion cycle in the engine to be performed. In applications in lean combustion a potential problem caused by the strong oxidation processes of indium atoms was encountered. This limits measurement times due to deposits of absorbing indium oxide on measurement windows. The seeding requirement is a disadvantage of the technique and can be a limitation in some applications. The results from experiments performed in sooting flames are very promising for thermometry measurements in such environments. Absorption by hydrocarbons and other native species was found to be negligible. Since low laser energies and low seeding concentrations could be used, the technique did not, unlike most other incoherent optical thermometry techniques, suffer interferences from LII of soot particles or LIF from PAH

  2. Tunable diode laser spectroscopy as a technique for combustion diagnostics

    Science.gov (United States)

    Bolshov, M. A.; Kuritsyn, Yu. A.; Romanovskii, Yu. V.

    2015-04-01

    Tunable diode laser absorption spectroscopy (TDLAS) has become a proven method of rapid gas diagnostics. In the present review an overview of the state of the art of TDL-based sensors and their applications for measurements of temperature, pressure, and species concentrations of gas components in harsh environments is given. In particular, the contemporary tunable diode laser systems, various methods of absorption detection (direct absorption measurements, wavelength modulation based phase sensitive detection), and relevant algorithms for data processing that improve accuracy and accelerate the diagnostics cycle are discussed in detail. The paper demonstrates how the recent developments of these methods and algorithms made it possible to extend the functionality of TDLAS in the tomographic imaging of combustion processes. Some prominent examples of applications of TDL-based sensors in a wide range of practical combustion aggregates, including scramjet engines and facilities, internal combustion engines, pulse detonation combustors, and coal gasifiers, are given in the final part of the review.

  3. Plant Variety Protection and DUS Testing Technique

    Institute of Scientific and Technical Information of China (English)

    LI Xiao-hui; LI Xin-hai; ZHANG Shi-huang; LI Ming-shun; LI Wen-hua

    2002-01-01

    DUS testing technique used for plant variety protection was reviewed in the paper, and somesuggestions were made on how to establish the appropriate technology system in China. Meanwhile, the poten-tial exploitation of the technique was discussed.

  4. Simultaneous measurement of droplet size and velocity field by an interferometric imaging technique in spray combustion

    Energy Technology Data Exchange (ETDEWEB)

    Fujisawa, N.; Hosokawa, A.; Tomimatsu, S. [Niigata Univ. (Japan). Dept. of Mechanical and Production Engineering

    2003-08-01

    The present paper describes an experimental technique of droplet sizing and velocity measurement for application to a luminous flame in spray combustion. The size measurement of unburnt fuel droplets in combustion is carried out by using an interferometric imaging method, while the corresponding velocity field is measured by particle tracking velocimetry (PTV) in combination with the rotary shutter to avoid the high intensity noise of the luminous flame in spray combustion. The measurements are successfully applied to the spray flow from a gun-type burner with and without combustion. The experimental results in spray combustion indicate that the smaller size of fuel droplets are almost burnt in the centre of the flame and the unburnt droplets of larger size remain in the outer region of the burner flow. It was found that the mean droplet velocity measured by the present PTV technique in combustion is almost independent of the droplet size and agrees closely with the gas velocity. However, the velocity magnitude with combustion is increased in comparison with the case without combustion, which suggests the influence of gas expansion at high temperatures. (author)

  5. Fine and Ultrafine Particles from Combustion Sources - Investigations with in-situ techniques

    Energy Technology Data Exchange (ETDEWEB)

    Pagels, Joakim

    2005-04-01

    Fine airborne particles are associated with adverse health effects in the human population. The aim of this research was to develop and evaluate methods for in-situ characterisation of fine and ultrafine particles and to determine their deposition in the human airways. The aim was also to increase knowledge about health and environmentally relevant properties of aerosols from biomass combustion and selected indoor sources. The methods include instrumental techniques such as Scanning Mobility Particle Sizer (SMPS), Electrical Low-Pressure Impactor (ELPI), Aerodynamic Particle Sizer (APS) and Tandem Differential Mobility Analysers (TDMA) based on volatility and hygroscopic growth. Filter samplers and impactors were used for collecting particles on substrates for subsequent chemical analysis. Emissions from local district heating plants (0.5-12 MW), based on moving grate combustion of woody fuels, were sampled with a dilution system and characterised. Particles from the indoor sources of cigarettes, incense and candles were examined in the laboratory by using an airtight 22 m{sup 3} stainless steel chamber. A set-up to determine respiratory deposition in humans was constructed. It was automatised and uses an electrical mobility spectrometer with an improved inversion algorithm to perform fast measurements of particles of different sizes in the inhaled and exhaled air. It was evaluated on human test-persons. The investigated biomass combustion sources emit high concentrations of fine and ultrafine particles. The chemical composition is dominated by KCl and K{sub 2}SO{sub 4}; Zn, Cd and Pb were also quantified. Elemental carbon was identified in particles larger than 150 nm during periods of incomplete combustion. The particle concentration depends on the fuel ash content and the combustion efficiency. The aerosol is essentially internally mixed with hygroscopic growth factors significantly higher than reported for diesel exhaust and environmental tobacco smoke. The

  6. Combustion systems and power plants incorporating parallel carbon dioxide capture and sweep-based membrane separation units to remove carbon dioxide from combustion gases

    Science.gov (United States)

    Wijmans, Johannes G.; Merkel, Timothy C; Baker, Richard W.

    2011-10-11

    Disclosed herein are combustion systems and power plants that incorporate sweep-based membrane separation units to remove carbon dioxide from combustion gases. In its most basic embodiment, the invention is a combustion system that includes three discrete units: a combustion unit, a carbon dioxide capture unit, and a sweep-based membrane separation unit. In a preferred embodiment, the invention is a power plant including a combustion unit, a power generation system, a carbon dioxide capture unit, and a sweep-based membrane separation unit. In both of these embodiments, the carbon dioxide capture unit and the sweep-based membrane separation unit are configured to be operated in parallel, by which we mean that each unit is adapted to receive exhaust gases from the combustion unit without such gases first passing through the other unit.

  7. Post combustion in combined cycle power plants; La post-combustion nei cicli combinati

    Energy Technology Data Exchange (ETDEWEB)

    Gozzi, M. [comp. (Italy)

    2002-02-01

    Post combustion is a valid aid for combined cycle gas turbine, are evaluated environmental impact and effectiveness. [Italian] La combustione addizionale puo' essere un valido ausilio per i cicli combinati con turbina a gas. I limiti di convenienza. La valutazione dell'impatto ambientale.

  8. Emission counter-measures in post-combustion CO2 capture: demonstration at pilot plant scale

    NARCIS (Netherlands)

    Miguel Mercader, F. de; Khakharia, P.M.; Ham, L.V. van der; Huizinga, A.; Kester, L.G.C.; Os, P.J. van; Goetheer. E.L.V.

    2013-01-01

    One of the objectives of the OCTAVIUS project is the demonstration of emission countermeasures for post-combustion CO2 capture. To accomplish it, an acid wash was designed and commissioned at TNO’s CO2 capture pilot plant, which is connected to a coal-fired power plant.

  9. Performance and Modelling of the Pre-combustion Capture Pilot Plant at the Buggenum IGCC

    NARCIS (Netherlands)

    Damen, K.; Faber, R.; Gnutek, R.; Van Dijk, H.A.J.; Trapp, C.; Valenz, L.

    2014-01-01

    This paper summarizes the final results of the pilot plant operation and R&D programme of the CO2 Catch-up project (2008- 2013). The objective of the CO2 Catch-up project is to demonstrate pre-combustion CO2 capture at the pilot plant in Buggenum, the Netherlands, in order to verify the technology p

  10. Emission counter-measures in post-combustion CO2 capture: demonstration at pilot plant scale

    NARCIS (Netherlands)

    Miguel Mercader, F. de; Khakharia, P.M.; Ham, L.V. van der; Huizinga, A.; Kester, L.G.C.; Os, P.J. van; Goetheer. E.L.V.

    2013-01-01

    One of the objectives of the OCTAVIUS project is the demonstration of emission countermeasures for post-combustion CO2 capture. To accomplish it, an acid wash was designed and commissioned at TNO’s CO2 capture pilot plant, which is connected to a coal-fired power plant.

  11. Chemical composition and properties of ashes from combustion plants using Miscanthus as fuel.

    Science.gov (United States)

    Lanzerstorfer, Christof

    2017-04-01

    Miscanthus giganteus is one of the energy crops considered to show potential for a substantial contribution to sustainable energy production. In the literature there is little data available about the chemical composition of ashes from the combustion of Miscanthus and practically no data about their physical properties. However, for handling, treatment and utilization of the ashes this information is important. In this study ashes from two biomass combustion plants using Miscanthus as fuel were investigated. The density of the ashes was 2230±35kg/m(3), which was similar to the density of ashes from straw combustion. Also the bulk densities were close to those reported for straw ashes. The flowability of the ashes was a little worse than the flowability of ashes from wood combustion. The measured heavy metal concentrations were below the usual limits for utilization of the ashes as soil conditioner. The concentrations in the bottom ash were similar to those reported for ash from forest residue combustion plants. In comparison with cyclone fly ashes from forest residue combustion the measured heavy metal concentrations in the cyclone fly ash were considerably lower. Cl(-), S and Zn were enriched in the cyclone fly ash which is also known for ashes from wood combustion. In comparison with literature data obtained from Miscanthus plant material the concentrations of K, Cl(-) and S were lower. This can be attributed to the fact that the finest fly ash is not collected by the cyclone de-dusting system of the Miscanthus combustion plants. Copyright © 2016. Published by Elsevier B.V.

  12. Assessment of ISLOCA risk-methodology and application to a combustion engineering plant

    Energy Technology Data Exchange (ETDEWEB)

    Kelly, D.L.; Auflick, J.L.; Haney, L.N. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1992-04-01

    Inter-system loss-of-coolant accidents (ISLOCAs) have been identified as important contributors to offsite risk for some nuclear power plants. A methodology has been developed for identifying and evaluating plant-specific hardware designs, human factors issues, and accident consequence factors relevant to the estimation of ISOLOCA core damage frequency and risk. This report presents a detailed of description of the application of this analysis methodology to a Combustion Engineering plant.

  13. Level of detail technique for plant models

    Institute of Scientific and Technical Information of China (English)

    Xiaopeng ZHANG; Qingqiong DENG; Marc JAEGER

    2006-01-01

    Realistic modelling and interactive rendering of forestry and landscape is a challenge in computer graphics and virtual reality. Recent new developments in plant growth modelling and simulation lead to plant models faithful to botanical structure and development, not only representing the complex architecture of a real plant but also its functioning in interaction with its environment. Complex geometry and material of a large group of plants is a big burden even for high performances computers, and they often overwhelm the numerical calculation power and graphic rendering power. Thus, in order to accelerate the rendering speed of a group of plants, software techniques are often developed. In this paper, we focus on plant organs, i.e. leaves, flowers, fruits and inter-nodes. Our approach is a simplification process of all sparse organs at the same time, i. e. , Level of Detail (LOD) , and multi-resolution models for plants. We do explain here the principle and construction of plant simplification. They are used to construct LOD and multi-resolution models of sparse organs and branches of big trees. These approaches take benefit from basic knowledge of plant architecture, clustering tree organs according to biological structures. We illustrate the potential of our approach on several big virtual plants for geometrical compression or LOD model definition. Finally we prove the efficiency of the proposed LOD models for realistic rendering with a virtual scene composed by 184 mature trees.

  14. Danish emission inventories for stationary combustion plants. Inventories until year 2004

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Ole-Kenneth; Nielsen, Malene; Boll Illerup, J.

    2007-04-15

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO2, NOX, NMVOC, CH4, CO, CO2, N2O, particulate matter, heavy metals, dioxins and PAH. A considerable decrease of the SO2, NOX and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The emission of CH4 has increased due to increased use of lean-burn gas engines in CHP plants. The emission of PAH increased as a result of the increased combustion of wood in residential boilers and stoves. The dioxin emission decreased due to flue gas cleaning on waste incineration plants. Uncertainties for the emissions and trends have been estimated. (au)

  15. Reducing Power Penalty Related to PostCombustion CO2 Capture in Coal Power Plants

    Directory of Open Access Journals (Sweden)

    Ramona Mihaela Negoi

    2011-09-01

    Full Text Available Considering the important role of coal in energy security and in the same time the growing need to reduce CO2 emissions, amine-based post-combustion CO2 capture is considered as one of the most proper technologies to be implemented in coal fired power plants as well in natural gas fired plants, refinery gas, cement plants etc.. The main challenge for CO2 post-combustion is reducing the energy demand of the process, especially for solvent regeneration. In this paper, the energy reduction potential when waste heat of flue gases is integrated in the CO2 capture configuration scheme is discussed. The results are compared with a conventional coal power plant configuration when low-steam pressure is extracted from the water-steam cycle of the power plant.

  16. Characterization of combustion synthesized zirconia powder by UV-vis, IR and other techniques

    Indian Academy of Sciences (India)

    H Ranjan Sahu; G Ranga Rao

    2000-10-01

    Fine powders of zirconia were prepared by employing combustion method with varying fuel to precursor molar ratios. The zirconia powders contained more amount of monoclinic phase as the fuel content was increased. This aspect was studied using XRD, IR and UV-vis diffuse reflectance techniques. The surface acidbase properties of these samples were also investigated by indicator titration method. The catalytic activity was probed with transfer hydrogenation reaction in liquid phase. It was found that combustion synthesized zirconia did not provide required active sites for transfer hydrogenation reactions in liquid phase unlike hydrous zirconia.

  17. Combustion based technique for synthesis and joining of refractory materials

    Science.gov (United States)

    White, Jeremiah David Edward

    Gasless combustion systems offer features that make them attractive tools for a variety of potential applications. Among them are rapid heating rates, high exothermicity, and high maximum temperatures. These characteristics were exploited to accomplish three separate concepts including the joining of refractory materials, synthesis of a pore-free composite, and the study of thermal explosion in mechanically activated powders. Honeywell Aerospace is a leading producer of carbon brakes for commercial aircraft. The manufacturing process involves chemical vapor infiltration (CVI) to form a carbon matrix around a carbon fiber preform. A major disadvantage of this approach is the time required to form a fully dense preform, which is on the order of 140 days. In addition, after the brakes are in service, they have to be discarded while there is a relatively thick amount of friction material still available. There is a profit motive for reusing these discs which are out of spec. One such example would be to perform a refurbishment by bonding a new thin C/C element onto a used "core" to produce a brake that meets performance specifications. Unfortunately, joining C/C composites is not a simple task, as carbon does not lend itself to welding, and other means (e.g. mechanical or adhesives) would not hold up to the harsh operational conditions. A novel apparatus was designed, built, and proven to join C/C using so-called reactive resistance welding (RRW). It is shown that a joint stronger than the original material can be achieved using moderate electrical current and mechanical force. Additionally, joining layers of similar thickness and microstructure were obtained with different reactive media, ranging from pellets of pressed powders (˜1-2 mm) to thin metal foils (˜25 micron). By modifying the schematic of the RRW apparatus, porous C/C was infiltrated with liquid silicon in order to form a new pore-free C/C-SiC composite. It is shown that using such a process, the silicon

  18. Enhancing Accuracy of Plant Leaf Classification Techniques

    Directory of Open Access Journals (Sweden)

    C. S. Sumathi

    2014-03-01

    Full Text Available Plants have become an important source of energy, and are a fundamental piece in the puzzle to solve the problem of global warming. Living beings also depend on plants for their food, hence it is of great importance to know about the plants growing around us and to preserve them. Automatic plant leaf classification is widely researched. This paper investigates the efficiency of learning algorithms of MLP for plant leaf classification. Incremental back propagation, Levenberg–Marquardt and batch propagation learning algorithms are investigated. Plant leaf images are examined using three different Multi-Layer Perceptron (MLP modelling techniques. Back propagation done in batch manner increases the accuracy of plant leaf classification. Results reveal that batch training is faster and more accurate than MLP with incremental training and Levenberg– Marquardt based learning for plant leaf classification. Various levels of semi-batch training used on 9 species of 15 sample each, a total of 135 instances show a roughly linear increase in classification accuracy.

  19. Combustion synthesis of advanced materials. [using in-situ infiltration technique

    Science.gov (United States)

    Moore, J. J.; Feng, H. J.; Perkins, N.; Readey, D. W.

    1992-01-01

    The combustion synthesis of ceramic-metal composites using an in-situ liquid infiltration technique is described. The effect of varying the reactants and their stoichiometry to provide a range of reactant and product species i.e. solids, liquids and gases, with varying physical properties e.g. thermal conductivity, on the microstructure and morphology of synthesized products is also described. Alternatively, conducting the combustion synthesis reaction in a reactive gas environment is also discussed, in which advantages can be gained from the synergistic effects of combustion synthesis and vapor phase transport. In each case, the effect of the presence or absence of gravity (density) driven fluid flow and vapor transport is discussed as is the potential for producing new and perhaps unique materials by conducting these SHS reactions under microgravity conditions.

  20. Danish emission inventories for stationary combustion plants. Inventories until year 2007

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Malene; Nielsen, Ole-Kenneth; Plejdrup, M.; Hjelgaard, K.

    2009-10-15

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO{sub 2}, NO{sub x}, NMVOC, CH{sub 4}, CO, CO{sub 2}, N{sub 2}O, particulate matter, heavy metals, dioxins, HCB and PAH. The CO{sub 2} emission in 2007 was 10% lower than in 1990. However fluctuations in the emission level are large as a result of electricity import/export. The emission of CH{sub 4} has increased due to increased use of lean-burn gas engines in combined heating and power (CHP) plants. However the emission has decreased in recent years due to structural changes in the Danish electricity market. The N{sub 2}O emission was higher in 2007 than in 1990 but the fluctuations in the timeseries are significant. A considerable decrease of the SO{sub 2}, NO{sub x} and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The combustion of wood in residential plants has increased considerably in recent years resulting in increased emission of PAH, particulate matter and CO. The emission of NMVOC has increased since 1990 as a result of both the increased combustion of wood in residential plants and the increased emission from lean-burn gas engines. The dioxin emission decreased since 1990 due to flue gas cleaning on waste incineration plants. However in recent years the emission has increased as a result of the increased combustion of wood in residential plants. (author)

  1. Exergetic analysis of cogeneration plants through integration of internal combustion engine and process simulators

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Leonardo de Oliveira [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)], E-mail: leonardo.carvalho@petrobras.com.br; Leiroz, Albino Kalab; Cruz, Manuel Ernani [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Mecanica], Emails: leiroz@mecanica.ufrj.br, manuel@mecanica.ufrj.br

    2010-07-01

    Internal combustion engines (ICEs) have been used in industry and power generation much before they were massively employed for transportation. Their high reliability, excellent power-to-weight ratio, and thermal efficiency have made them a competitive choice as main energy converters in small to medium sized power plants. Process simulators can model ICE powered energy plants with limited depth, due to the highly simplified ICE models used. Usually a better understanding of the global effects of different engine parameters is desirable, since the combustion process within the ICE is typically the main cause of exergy destruction in systems which utilize them. Dedicated commercial ICE simulators have reached such a degree of maturity, that they can adequately model a wide spectrum of phenomena that occur in ICEs. However, ICE simulators are unable to incorporate the remaining of power plant equipment and processes in their models. This paper presents and exploits the integration of an internal combustion engine simulator with a process simulator, so as to evaluate the construction of a fully coupled simulation platform to analyze the performance of ICE-based power plants. A simulation model of an actual cogeneration plant is used as a vehicle for application of the proposed computational methodology. The results show that by manipulating the engine mapping parameters, the overall efficiency of the plant can be improved. (author)

  2. Integrated diagnostic technique for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Gofuku, Akio [Graduate School of Natural Science and Technology, Okayama University, Okayama (Japan)

    2014-12-15

    It is very important to detect and identify small anomalies and component failures for the safe operation of complex and large-scale artifacts such as nuclear power plants. Each diagnostic technique has its own advantages and limitations. These facts inspire us not only to enhance the capability of diagnostic techniques but also to integrate the results of diagnostic subsystems in order to obtain more accurate diagnostic results. The article describes the outline of four diagnostic techniques developed for the condition monitoring of the fast breeder reactor 'Monju'. The techniques are (1) estimation technique of important state variables based on a physical model of the component, (2) a state identification technique by non-linear discrimination function applying SVM (Support Vector Machine), (3) a diagnostic technique applying WT (Wavelet Transformation) to detect changes in the characteristics of measurement signals, and (4) a state identification technique effectively using past cases. In addition, a hybrid diagnostic system in which a final diagnostic result is given by integrating the results from subsystems is introduced, where two sets of values called confidence values and trust values are used. A technique to determine the trust value is investigated under the condition that the confidence value is determined by each subsystem.

  3. Process Simulation of Oxy-combustion CO2 Capture in Cement Plant

    OpenAIRE

    2014-01-01

    The objectives of this master thesis have been to model and simulate oxy-combustion CO2 capture in a cement plant. The model developed is a process simulation of the calcination process with varying degree of air in-leakage, where heat is supplied by combustion in an oxygen rich environment, followed by capture of the CO2. The further gas separation after H2O condensation to achieve the required CO2 quality was evaluated. In addition to the process simulations, a review of literature related ...

  4. Advanced combustion technologies for gas turbine power plants

    Energy Technology Data Exchange (ETDEWEB)

    Vandsburger, U.; Desu, S.B. [Virginia Tech, Blacksburg, VA (United States); Roe, L.A.

    1995-10-01

    During the second half of fiscal year 1995 progress was made in all three funded subject areas of the project as well as in a new area. Work in the area of mixing and combustion management through flow actuation was transferred into an enclosed facility. Jet mixing in a ducted co-flow was examined. The same jets were also subjected to a strong acoustic field established in the duct. Excitation of the jet with static spatial modes was shown to be effective even in the presence of co-flow and the acoustic field. Only when a wall is placed at the jet exit plane did the acoustic field dominate the jet dispersion (as expected due to reflective boundary conditions and the jet shear layer receptivity). This case is, however, not the most relevant to gas turbine combustors since it precludes co-flow. In the area of combustor testing, the design, fabrication, and assembly of a modular combustor test rig for project has been completed at the University of Arkansas. In the area of high temperature piezoceramic actuator materials development, Sr{sub 2}(Nb{sub x}Ta{sub 1-x}){sub 2}O{sub 7} powders have been synthesized, and bulk samples and thick films sintered. These materials have a curie temperature of about 1400{degrees}C compared with 300{degrees}C for the commercially available PZT. While at room temperature the new materials show a piezoelectric constant (d{sub 33}) which is a factor of 100 lower than PZT, at high temperatures they can exhibit significant action. A new area of non-linear, neural-net based, controllers for mixing and combustion control has been added during the second contract year. This work is not funded by the contract. Significant progress was made in this area. Neural nets with up to 15 neurons in the hidden layer were trained with experimental data and also with data generated using linear stability theory. System ID was performed successfully. The network was then used to predict the behavior of jets excited at other modes not used for the training.

  5. Sprinkler and water spray techniques in fires of combustible liquids. Sprinkleritekniikka nestepaloissa

    Energy Technology Data Exchange (ETDEWEB)

    Keski-Rahkonen, O.

    1986-08-15

    The purpose of this review is to find out what is known scientifically about extinguishment and control of fires in combustible liquids by sprinkler and water spray techniques. Because no review on combustion is available in Finnish, the first part of the study deals extensively with principles and the most important parameters of combustion of liquids in different geometries. The theory of flames based on diffusion equations is outlined both for laminar and turbulent flow. Then the application of these theories on pool fire and droplet burning are described. The theoretical extinction criteria were studied to find out the essential factors controlling the extinguishment process. The movement of water droplets in and interactions with flames is approached theoretically and experimentally. The latter part of the study presents the most important sprinkler test series since the fifties. It gives a simple theory on sprinkler actuation time and describes test series designed to find out practical answers to the required water flux density. Most of the tests deal with pool fire of combustible liquids. The extinguishment of a gas blow out fire and a number of tests using solid fuels are also included. The fires and the protection by water spray cooling of the storage tanks and pressure vessels are reviewed. Finally, the development of early-suppression, fast-response (ESFR) and intelligent sprinkler systems is described briefly.

  6. Advanced Laser-Based Techniques for Gas-Phase Diagnostics in Combustion and Aerospace Engineering.

    Science.gov (United States)

    Ehn, Andreas; Zhu, Jiajian; Li, Xuesong; Kiefer, Johannes

    2017-03-01

    Gaining information of species, temperature, and velocity distributions in turbulent combustion and high-speed reactive flows is challenging, particularly for conducting measurements without influencing the experimental object itself. The use of optical and spectroscopic techniques, and in particular laser-based diagnostics, has shown outstanding abilities for performing non-intrusive in situ diagnostics. The development of instrumentation, such as robust lasers with high pulse energy, ultra-short pulse duration, and high repetition rate along with digitized cameras exhibiting high sensitivity, large dynamic range, and frame rates on the order of MHz, has opened up for temporally and spatially resolved volumetric measurements of extreme dynamics and complexities. The aim of this article is to present selected important laser-based techniques for gas-phase diagnostics focusing on their applications in combustion and aerospace engineering. Applicable laser-based techniques for investigations of turbulent flows and combustion such as planar laser-induced fluorescence, Raman and Rayleigh scattering, coherent anti-Stokes Raman scattering, laser-induced grating scattering, particle image velocimetry, laser Doppler anemometry, and tomographic imaging are reviewed and described with some background physics. In addition, demands on instrumentation are further discussed to give insight in the possibilities that are offered by laser flow diagnostics.

  7. Danish emission inventories for stationary combustion plants. Inventories until year 2002

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, M.; Boll Illerup, J.

    2004-12-01

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO{sub 2}, NO{sub X}, NMVOC, CH{sub 4}, CO, CO{sub 2}, N{sub 2}O, particulate matter, heavy metals, dioxins and PAH. Since 1990 the fuel consumption in stationary combustion has increased by 14% - the fossil fuel consumption however only by 8%. Despite the increased fuel consumption the emission of several pollutants has decreased due to the improved flue gas cleaning technology, improved burner technology and the change of fuel type used. A considerable decrease of the SO{sub 2}, NO{sub X} and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The greenhouse gas emission has decreased 1,3% since 1990. The emission of CH{sub 4}, however, has increased due to increased use of lean-burn gas engines in CHP plants. The emission of PAH increased as a result of the increased combustion of wood in residential boilers and stoves. Uncertainties for the emissions and trends have been estimated. (au)

  8. Danish emission inventories for stationary combustion plants. Inventories until year 2003

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Malene; Illerup, Jytte B.

    2006-01-15

    Emission inventories for stationary combustion plants are presented and the methodologies and assumptions used for the inventories are described. The pollutants considered are SO{sub 2}, NO{sub x}, NMVOC, CH{sub 4}, CO, CO{sub 2}, N{sub 2}O, particulate matter, heavy metals, dioxins and PAH. Since 1990 the fuel consumption in stationary combustion has increased by 25% - the fossil fuel consumption, however, only by 18%. Despite the increased fuel consumption the emission of several pollutants has decreased due to the improved flue gas cleaning technology, improved burner technology and the change of fuel type used. A considerable decrease of the SO{sub 2}, NO{sub x} and heavy metal emissions is mainly a result of decreased emissions from large power plants and waste incineration plants. The greenhouse gas emission has increased by 11% since 1990 mainly due to increasing export of electricity. The emission of CH{sub 4} has increased due to increased use of lean-burn gas engines in CHP plants. The emission of PAH increased as a result of the increased combustion of wood in residential boilers and stoves. Uncertainties for the emissions and trends have been estimated. (au)

  9. Improved electrical efficiency and bottom ash quality on waste combustion plants. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Peter A.; Nesterov, I.; Boejer, M.; Hyks, J.; Astrup, T.; Kloeft, H.; Dam-Johansen, K.; Lundtorp, K.; Hedegaard Madsen, O.; Frandsen, F. (Technical Univ. of Denmark, Kgs. Lyngby (Denmark)); Mogensen, Erhardt (Babcock and Wilcox Voelund A/S, Glostrup (Denmark))

    2010-07-01

    Investigations making it possible to evaluate and further develop concepts to improve electrical efficiency in a waste combustion plant were performed. Furthermore, one objective of the study was to investigate the possibilities of improving waste bottom ash leaching properties by use of a rotary kiln treatment. The project work included construction of a bench-scale rotary kiln, performing ash rotary kiln treatment experiments, conducting gas suction probe measurements on a waste incineration plant and making some concept evaluations. The influence of the rotary kiln thermal treatment on the leaching of Ca, Al, Si, Mg, Ba, Sr, Cl, Cu, Pb, Zn, Cr, Mo, sulfate, DOC and carbonate was determined. As a result of these tests, the rotary kiln thermal treatment of bottom ashes can be recommended for reducing the leaching of Cu, Pb, Cl, Zn and DOC; however, an increased leaching of Cr and Mo should be expected. The combustion conditions above the grate of a waste incineration plant were investigated and the release and concentration of volatile ash species in the flue gas such as Cl, Na, K, Ca, Pb, Zn and S were measured. The conducted measurements show that flue gas from grate sections 3 and 4 can produce a sufficiently hot flue gas that contains only low concentrations of corrosive species, and therefore can be used to increase superheater temperatures. Implementation of the so-called flue gas split concept together with other steam circle modifications on a waste combustion plant, and using a reasonable increase in final steam temperature from 400 to 500 deg. C, have the potential to increase electrical efficiency from 24 to 30% (with respect to lower fuel heating value) in a waste combustion plant. (Author)

  10. System approach to the analysis of an integrated oxy-fuel combustion power plant

    Science.gov (United States)

    Ziębik, Andrzej; Gładysz, Paweł

    2014-09-01

    Oxy-fuel combustion (OFC) belongs to one of the three commonly known clean coal technologies for power generation sector and other industry sectors responsible for CO2 emissions (e.g., steel or cement production). The OFC capture technology is based on using high-purity oxygen in the combustion process instead of atmospheric air. Therefore flue gases have a high concentration of CO2. Due to the limited adiabatic temperature of combustion some part of CO2 must be recycled to the boiler in order to maintain a proper flame temperature. An integrated oxy-fuel combustion power plant constitutes a system consisting of the following technological modules: boiler, steam cycle, air separation unit, cooling water and water treatment system, flue gas quality control system and CO2 processing unit. Due to the interconnections between technological modules, energy, exergy and ecological analyses require a system approach. The paper present the system approach based on the `input-output' method to the analysis of the: direct energy and material consumption, cumulative energy and exergy consumption, system (local and cumulative) exergy losses, and thermoecological cost. Other measures like cumulative degree of perfection or index of sustainable development are also proposed. The paper presents a complex example of the system analysis (from direct energy consumption to thermoecological cost) of an advanced integrated OFC power plant.

  11. System approach to the analysis of an integrated oxy-fuel combustion power plant

    Directory of Open Access Journals (Sweden)

    Ziębik Andrzej

    2014-09-01

    Full Text Available Oxy-fuel combustion (OFC belongs to one of the three commonly known clean coal technologies for power generation sector and other industry sectors responsible for CO2 emissions (e.g., steel or cement production. The OFC capture technology is based on using high-purity oxygen in the combustion process instead of atmospheric air. Therefore flue gases have a high concentration of CO2. Due to the limited adiabatic temperature of combustion some part of CO2 must be recycled to the boiler in order to maintain a proper flame temperature. An integrated oxy-fuel combustion power plant constitutes a system consisting of the following technological modules: boiler, steam cycle, air separation unit, cooling water and water treatment system, flue gas quality control system and CO2 processing unit. Due to the interconnections between technological modules, energy, exergy and ecological analyses require a system approach. The paper present the system approach based on the ‘input-output’ method to the analysis of the: direct energy and material consumption, cumulative energy and exergy consumption, system (local and cumulative exergy losses, and thermoecological cost. Other measures like cumulative degree of perfection or index of sustainable development are also proposed. The paper presents a complex example of the system analysis (from direct energy consumption to thermoecological cost of an advanced integrated OFC power plant.

  12. Solubility analysis and disposal options of combustion residues from plants grown on contaminated mining area.

    Science.gov (United States)

    Kovacs, Helga; Szemmelveisz, Katalin; Palotas, Arpad Bence

    2013-11-01

    Biomass, as a renewable energy source, is an excellent alternative for the partial replacement of fossil fuels in thermal and electric energy production. A new fuel type as biomass for energy utilisation includes ligneous plants with considerable heavy metal content. The combustion process must be controlled during the firing of significant quantities of contaminated biomass grown on brownfield lands. By implementing these measures, air pollution and further soil contamination caused by the disposal of the solid burning residue, the ash, can be prevented. For the test samples from ligneous plants grown on heavy metal-contaminated fields, an ore mine (already closed for 25 years) was chosen. With our focus on the determination of the heavy metal content, we have examined the composition of the soil, the biomass and the combustion by-products (ash, fly ash). Our results confirm that ash resulting from the combustion must be treated as toxic waste and its deposition must take place on hazardous waste disposal sites. Biomass of these characteristics can be burnt in special combustion facility that was equipped with means for the disposal of solid burning residues as well as air pollutants.

  13. Study of boron behaviour in two Spanish coal combustion power plants.

    Science.gov (United States)

    Ochoa-González, Raquel; Cuesta, Aida Fuente; Córdoba, Patricia; Díaz-Somoano, Mercedes; Font, Oriol; López-Antón, M Antonia; Querol, Xavier; Martínez-Tarazona, M Rosa; Giménez, Antonio

    2011-10-01

    A full-scale field study was carried out at two Spanish coal-fired power plants equipped with electrostatic precipitator (ESP) and wet flue gas desulfurisation (FGD) systems to investigate the distribution of boron in coals, solid by-products, wastewater streams and flue gases. The results were obtained from the simultaneous sampling of solid, liquid and gaseous streams and their subsequent analysis in two different laboratories for purposes of comparison. Although the final aim of this study was to evaluate the partitioning of boron in a (co-)combustion power plant, special attention was paid to the analytical procedure for boron determination. A sample preparation procedure was optimised for coal and combustion by-products to overcome some specific shortcomings of the currently used acid digestion methods. In addition boron mass balances and removal efficiencies in ESP and FGD devices were calculated. Mass balance closures between 83 and 149% were obtained. During coal combustion, 95% of the incoming boron was collected in the fly ashes. The use of petroleum coke as co-combustible produced a decrease in the removal efficiency of the ESP (87%). Nevertheless, more than 90% of the remaining gaseous boron was eliminated via the FGD in the wastewater discharged from the scrubber, thereby causing environmental problems.

  14. Techniques for Analysis of Plant Phenolic Compounds

    Directory of Open Access Journals (Sweden)

    Thomas H. Roberts

    2013-02-01

    Full Text Available Phenolic compounds are well-known phytochemicals found in all plants. They consist of simple phenols, benzoic and cinnamic acid, coumarins, tannins, lignins, lignans and flavonoids. Substantial developments in research focused on the extraction, identification and quantification of phenolic compounds as medicinal and/or dietary molecules have occurred over the last 25 years. Organic solvent extraction is the main method used to extract phenolics. Chemical procedures are used to detect the presence of total phenolics, while spectrophotometric and chromatographic techniques are utilized to identify and quantify individual phenolic compounds. This review addresses the application of different methodologies utilized in the analysis of phenolic compounds in plant-based products, including recent technical developments in the quantification of phenolics.

  15. CONCEPTUAL DESIGN AND ECONOMICS OF A NOMINAL 500 MWe SECOND-GENERATION PFB COMBUSTION PLANT

    Energy Technology Data Exchange (ETDEWEB)

    A. Robertson; H. Goldstein; D. Horazak; R. Newby

    2003-09-01

    Research has been conducted under United States Department of Energy Contract DE-AC21-86MC21023 to develop a new type of coal-fired plant for electric power generation. This new type of plant, called a Second Generation Pressurized Fluidized Bed Combustion Plant (2nd Gen PFB), offers the promise of efficiencies greater than 48 percent, with both emissions and a cost of electricity that are significantly lower than those of conventional pulverized coal-fired (PC) plants with wet flue gas desulfurization. The 2nd Gen PFB plant incorporates the partial gasification of coal in a carbonizer, the combustion of carbonizer char in a pressurized circulating fluidized bed boiler, and the combustion of carbonizer syngas in a gas turbine combustor to achieve gas turbine inlet temperatures of 2300 F and higher. A conceptual design and an economic analysis was previously prepared for this plant. When operating with a Siemens Westinghouse W501F gas turbine, a 2400psig/1000 F/1000 F/2-1/2 in. Hg. steam turbine, and projected carbonizer, PCFB, and topping combustor performance data, the plant generated 496 MWe of power with an efficiency of 44.9 percent (coal higher heating value basis) and a cost of electricity 22 percent less than a comparable PC plant. The key components of this new type of plant have been successfully tested at the pilot plant stage and their performance has been found to be better than previously assumed. As a result, the referenced conceptual design has been updated herein to reflect more accurate performance predictions together with the use of the more advanced Siemens Westinghouse W501G gas turbine. The use of this advanced gas turbine, together with a conventional 2400 psig/1050 F/1050 F/2-1/2 in. Hg. steam turbine increases the plant efficiency to 48.2 percent and yields a total plant cost of $1,079/KW (January 2002 dollars). The cost of electricity is 40.7 mills/kWh, a value 12 percent less than a comparable PC plant.

  16. Synthesis of bamboo-like carbon nanotubes by ethanol catalytic combustion technique

    Institute of Scientific and Technical Information of China (English)

    CHENG Jin; ZOU Xiao-ping; LI Fei; ZHANG Hong-dan; REN Peng-fei

    2006-01-01

    Bamboo-like carbon nanotubes were synthesized by ethanol catalytic combustion (ECC) technique with combustion method. Copper plate was employed as substrate,ethanol as carbon source,and iron chloride as catalyst precursor. The as-grown black powder was characterized by means of scanning electron microscopy,transmission electron microscopy and Raman spectroscopy. The results show that the thinner bamboo-like carbon nanotubes have a relatively good structure that the compartment layers are more regular,while the thicker carbon nanotubes have a relatively irregular bamboo-like structure:the proposed method is simple to synthesize bamboo-like carbon nanotubes and has some advantages,such as flexible synthesis conditions,simple setup,and environment-friendly.

  17. Preparation of carbon nanotubes by ethanol catalytic combustion technique using nickel salt as catalyst precursor

    Institute of Scientific and Technical Information of China (English)

    LI Fei; ZOU Xiao-ping; CHENG Jin; ZHANG Hong-dan; REN Peng-fei

    2006-01-01

    A simple growth technique of carbon nanotubes (CNTs) by combustion of ethanol was developed. In the experiment,copper plate was employed as substrate,nickel nitrate (Ni(NO3)2) and nickel chloride (NiCl2) as catalyst precursor,and ethanol as carbon source. The cleaned copper substrate was dipped into catalyst precursor solution for mounting catalyst precursor particles. The dip-coated substrate was then placed into ethanol flame for about 10 min after drying. The black wool-like production grown on copper plate was obtained. This route is called an ethanol catalytic combustion(ECC) process. The black powders were characterized by means of scanning electron microscopy(SEM),transmission electron microscopy(TEM),energy dispersive X-ray spectrometer(EDS) and Raman spectroscopy. The results show that the techique is much simpler and more economical to meet the future broader applications.

  18. Investigation on the spontaneous combustion of refuse-derived fuels during storage using a chemiluminescence technique.

    Science.gov (United States)

    Matunaga, Atsushi; Yasuhara, Akio; Shimizu, Yoshitada; Wakakura, Masahide; Shibamoto, Takayuki

    2008-12-01

    Refuse-derived fuel (RDF), a high-caloric material, is used by various combustion processes, such as power plants, as alternative fuel. Several explosion accidents, however, possibly initiated by the spontaneous combustion of stored RDF, have been reported in Japan. Therefore the spontaneous combustion of RDF prepared from domestic garbage was investigated using chemiluminescence. RDF samples were heated either under air or under nitrogen for 1, 2, or 4 h at 120 or 140 degrees C and then cooled by an air or nitrogen stream. All RDF samples exhibited chemiluminescence. In air-treated RDF samples (heated and cooled by air), chemiluminescence after ageing was shown to be slightly lower than before ageing, whereas in nitrogen-treated samples (both heated and cooled by nitrogen) chemiluminescence decreased significantly after ageing. When nitrogen was replaced with air during aging, however, a sudden increase of chemiluminescence was observed. On the other hand, when cooling was done with air, chemiluminescence increased. Higher chemiluminescence was also observed during high-temperature treatment. Further experiments on cellulose, one of the major components of domestic garbage, exhibited similar chemiluminescence patterns to those of RDF when treated by the same methods as those used for RDF ageing. Chemiluminescence from cellulose increased significantly when the atmospheric gas was changed from nitrogen to air, suggesting that oxygen in the air promoted the formation of hydroperoxide from cellulose. Therefore, it is hypothesized that cellulose plays an important role in the formation of chemiluminescence from RDF. The formation of chemiluminescence indicated that radicals are formed from RDF by oxidation or thermal degradation at room or atmospheric temperatures and may subsequently lead to spontaneous combustion.

  19. Lean homogenous combustion of E-diesel using external mixture formation technique

    Directory of Open Access Journals (Sweden)

    A. Avinash

    2015-09-01

    Full Text Available For the past one hundred years, lots of easily accessible petroleum fuel has been burned out by humankind in inefficient engines. In this regard, present-day engine researchers face a formidable challenge to achieve the goal of significant improvements in both thermal efficiency and fuel economy. Although the direction to reach this target is critical, homogenous charge compression ignition (HCCI is just another combustion concept to achieve this target. By the way, this work investigates the combustion phenomena of the HCCI engine by external mixture formation technique. In a nut-shell, an endeavor has been made in this work to prepare homogeneous mixture outside the combustion chamber using a fuel vaporizer system to form a uniform fuel–air mixture. The fundamental research experiments were carried out with vaporized diesel and vaporized e-diesel blends (10% and 20% ethanol substitution by volume, and the results were compared with conventional diesel engine operation. In HCCI mode, the maximum rate of pressure rises and the maximum rate of heat-release significantly reduced with increase of ethanol concentration in diesel. The experimental outcomes exposed that when HCCI engine is operated with e-diesel blend, smooth engine operation is apparent.

  20. Heat and mass transfer in combustion - Fundamental concepts and analytical techniques

    Science.gov (United States)

    Law, C. K.

    1984-01-01

    Fundamental combustion phenomena and the associated flame structures in laminar gaseous flows are discussed on physical bases within the framework of the three nondimensional parameters of interest to heat and mass transfer in chemically-reacting flows, namely the Damkoehler number, the Lewis number, and the Arrhenius number which is the ratio of the reaction activation energy to the characteristic thermal energy. The model problems selected for illustration are droplet combustion, boundary layer combustion, and the propagation, flammability, and stability of premixed flames. Fundamental concepts discussed include the flame structures for large activation energy reactions, S-curve interpretation of the ignition and extinctin states, reaction-induced local-similarity and non-similarity in boundary layer flows, the origin and removal of the cold boundary difficulty in modeling flame propagation, and effects of flame stretch and preferential diffusion on flame extinction and stability. Analytical techniques introduced include the Shvab-Zeldovich formulation, the local Shvab-Zeldovich formulation, flame-sheet approximation and the associated jump formulation, and large activation energy matched asymptotic analysis. Potentially promising research areas are suggested.

  1. Electrical and thermal characterization of Sm{sup 3+} doped ceria electrolytes synthesized by combustion technique

    Energy Technology Data Exchange (ETDEWEB)

    Mangalaraja, R.V., E-mail: mangal@udec.cl [Department of Materials Engineering, University of Concepcion, Concepcion (Chile); Ananthakumar, S. [Materials and Minerals Division, National Institute for Interdisciplinary Science and Technology (NIIST), CSIR, Trivandrum (India); Paulraj, M. [Department of Physics, University of Concepcion (Chile); Pesenti, H.; Lopez, Marta; Camurri, Carlos P. [Department of Materials Engineering, University of Concepcion, Concepcion (Chile); Barcos, Loreto A.; Avila, Ricardo E. [Department of Nuclear Materials, Chilean Nuclear Energy Commission, Santiago (Chile)

    2012-01-05

    Nanocrystalline samarium doped ceria electrolyte [Ce{sub 0.9}Sm{sub 0.1}O{sub 1.95}] was synthesized by citrate gel combustion technique involving mixtures of cerium nitrate oxidizer (O) and citric acid fuel (F) taken in the ratio of O/F = 1. The as-combusted precursors were calcined at 700 deg. C/2 h to obtain fully crystalline ceria nano particles. It was further made into cylindrical pellets by compaction and sintered at 1200 deg. C with different soaking periods of 2, 4 and 6 h. The sintered ceria was characterized for the microstructures, electrical conductivity, thermal conductivity and thermal diffusivity properties. In addition, the combustion derived ceria powder was also analysed for the crystallinity, BET surface area, particle size and powder morphology. Sintered ceria samples attained nearly 98% of the theoretical density at 1200 deg. C/6 h. The sintered microstructures exhibit dense ceria grains of size less than 500 nm. The electrical conductivity measurements showed the conductivity value of the order of 10{sup -2} S cm{sup -1} at 600 deg. C with activation energy of 0.84 eV between the temperatures 100 and 650 deg. C for ceria samples sintered at 1200 deg. C for 6 h. The room temperature thermal diffusivity and thermal conductivity values were determined as 0.5 x 10{sup -6} m{sup 2} s{sup -1} and 1.2 W m{sup -1} K{sup -1}, respectively.

  2. Foliage plants for indoor removal of the primary combustion gases carbon monoxide and nitrogen dioxide

    Science.gov (United States)

    Wolverton, B. C.; Mcdonald, R. C.; Mesick, H. H.

    1985-01-01

    Foliage plants were evaluated for their ability to sorb carbon monoxide and nitrogen dioxide, the two primary gases produced during the combustion of fossil fuels and tobacco. The spider plant (Chlorophytum elatum var. vittatum) could sorb 2.86 micrograms CO/sq cm leaf surface in a 6 h photoperiod. The golden pothos (Scindapsus aureus) sorbed 0.98 micrograms CO/sq cm leaf surface in the same time period. In a system with the spider plant, greater than or equal to 99 percent of an initial concentration of 47 ppm NO2 could be removed in 6 h from a void volume of approximately 0.35 cu m. One spider plant potted in a 3.8 liter container can sorb 3300 micrograms CO and effect the removal of 8500 micrograms NO2/hour, recognizing the fact that a significant fraction of NO2 at high concentrations will be lost by surface sorption, dissolving in moisture, etc.

  3. Post combustion CO2 capture as energy penalty in real power plant by retrofiting exergy efficiency

    Energy Technology Data Exchange (ETDEWEB)

    Parvandad Asadollahi, Maryam [Department of Mechanics, University of Manchester (United Kingdom)], e-mail: maryamassadollahi@yahoo.com

    2011-07-01

    Carbon dioxide (CO2) capture and storage is the only way the world to continue to enjoy the benefits of using coal while drastically reducing the emissions associated with coal combustion. CO2 is a component of the flue gas in a coal-fired power plant. The total pressure of the flue gas is 1 atm and the CO2 concentration is typically 10-15%. The process of transforming this low pressure, low concentration CO2 into a relatively pure CO2 stream is referred to as post-combustion capture. Present-day post-combustion capture plants currently use chemical absorption processes. Three systems based on amine-, carbonate- and ammonia-based process are discussed and presented in this paper. Use of other solvents with lower binding energy is suggested to decrease the exergy loss at the reboiler section. By adding flash for desalinating saline water, exergy loss is reduced significantly and extraction of steam at various pressures is possible through the heat recovery steam generator.

  4. Air emission from the co-combustion of alternative derived fuels within cement plants: Gaseous pollutants.

    Science.gov (United States)

    Richards, Glen; Agranovski, Igor E

    2015-02-01

    Cement manufacturing is a resource- and energy-intensive industry, utilizing 9% of global industrial energy use while releasing more than 5% of global carbon dioxide (CO₂) emissions. With an increasing demand of production set to double by 2050, so too will be its carbon footprint. However, Australian cement plants have great potential for energy savings and emission reductions through the substitution of combustion fuels with a proportion of alternative derived fuels (ADFs), namely, fuels derived from wastes. This paper presents the environmental emissions monitoring of 10 cement batching plants while under baseline and ADF operating conditions, and an assessment of parameters influencing combustion. The experiential runs included the varied substitution rates of seven waste streams and the monitoring of seven target pollutants. The co-combustion tests of waste oil, wood chips, wood chips and plastic, waste solvents, and shredded tires were shown to have the minimal influence when compared to baseline runs, or had significantly reduced the unit mass emission factor of pollutants. With an increasing ADF% substitution, monitoring identified there to be no subsequent emission effects and that key process parameters contributing to contaminant suppression include (1) precalciner and kiln fuel firing rate and residence time; (2) preheater and precalciner gas and material temperature; (3) rotary kiln flame temperature; (4) fuel-air ratio and percentage of excess oxygen; and (5) the rate of meal feed and rate of clinker produced.

  5. Characterization of cadmium substituted nickel ferrites prepared using auto-combustion technique

    Directory of Open Access Journals (Sweden)

    Manojit De

    2015-12-01

    Full Text Available In the present paper we have investigated synthesis of nickel ferrite (NiFe2O4 and cadmium substituted nickel ferrite (Ni1-xCdxFe2O4 powders with particles’ size in nanometer range using auto combustion technique as well as their sinterability. XRD analysis of the sintered samples confirmed the formation of single phase materials and the lattice parameter was increased with increase in cadmium concentration. It has also been observed that the estimated bulk densities of the materials decrease with increase in cadmium concentration, while they increase with the rise of sintering temperature.

  6. Qualitative analysis of coal combusted in boilers of the thermal power plants in Bosnia and Herzegovina

    Directory of Open Access Journals (Sweden)

    Đurić Slavko N.

    2012-01-01

    Full Text Available In this paper we have looked into the qualitative analysis of coals in Bosnia and Herzegovina (B-H. The analysis includes the following characteristics: moisture (W, ash (A, combustible matter (Vg and lower heating value (Hd. From the statistic parameters we have determined: absolute range (R, arithmetic mean (X, standard deviation (S and variations coefficient (Cv. It has been shown that the coal characteristics (W, A, Vg, Hd have normal distribution. The analysis show that there are considerable deviations of ash characteristics: moisture (36.23%, ash (34.21%, combustible matter (16.15% and lower heating value (25.16% from the mean value which is shown by the variations coefficient (Cv. Large oscilations of mass portions: W, A, Vg and Hd around the mean value can adversely influence the function of a boiler plant and an electric filter plant in thermal power plants in B-H in which the mentioned types of coal burn. Large ash oscilations (34.21% around the mean value point out to the inability of application of dry procedures of desulphurisation of smoke gasses (FGD due to the additional quantity of ash. It has been shown that the characteristics of Bosnian types of coal do not deviate a lot from the characteristics of coal in the surrounding countries (coals of Serbia and Monte Negro. The results can be used in analysis of coal combustion in thermal power plants, optimisation of electrical-filtre, reduction of SO2 in smoke gas and other practical problems.

  7. Separation of plant membranes by electromigration techniques.

    Science.gov (United States)

    Canut, H; Bauer, J; Weber, G

    1999-02-05

    The review focuses on the multiple separating regimes that offers the free flow electrophoresis technique: free flow zone electrophoresis, isoelectric focusing, isotachophoresis, free flow step electrophoresis. Also, the feasibility to apply either interval or continuous flow electrophoresis is evaluated. The free flow zone electrophoresis regime is generally selected for the separation of cells, organelles and membranes while the other regimes find their largest fields of applications in the purification of proteins and peptides. The latter regimes present the highest resolution efficiency. Therefore, a large part of this review is devoted to the applicabilities of these different regimes to the purification of organelles and membrane vesicles at the preparative scale. Recent developments, both in instrumentation and procedures, are described. The major achievements in plant membrane fractionation obtained with free flow electrophoresis are outlined. The related procedures are both analytical and preparative: they separate tonoplast and plasma membrane simultaneously from the same homogenate, they discriminate for one type of membrane vesicles of opposite orientation, and process large quantities of membrane material by reason of the continuous flow mode. Recent advances using electromigration techniques that permit confirmation of the dynamic state of membranes, characterisation of complex membrane-dependent functions and discovery of new membrane-localised activities are presented.

  8. High plant availability of phosphorus and low availability of cadmium in four biomass combustion ashes

    DEFF Research Database (Denmark)

    Li, Xiaoxi; Rubæk, Gitte Holton; Sørensen, Peter

    2016-01-01

    For biomass combustion to become a sustainable energy production system, it is crucial to minimise landfill of biomass ashes, to recycle the nutrients and to minimise the undesirable impact of hazardous substances in the ash. In order to test the plant availability of phosphorus (P) and cadmium (Cd......) in four biomass ashes, we conducted two pot experiments on a P-depleted soil and one mini-plot field experiment on a soil with adequate P status. Test plants were spring barley and Italian ryegrass. Ash applications were compared to triple superphosphate (TSP) and a control without P application. Both TSP...... ash. Contrarily, even modest increases in the TSP application markedly increased Cd uptake in plants. This might be explained by the low Cd solubility in the ash or by the reduced Cd availability due to the liming effect of ash. High concentrations of resin-extractable P (available P) in the ash...

  9. Water-gas shift (WGS) Operation of Pre-combustion CO2 Capture Pilot Plant at the Buggenum IGCC

    NARCIS (Netherlands)

    Van Dijk, H.A.J.; Damen, K.; Makkee, M.; Trapp, C.

    2014-01-01

    In the Nuon/Vattenfall CO2 Catch-up project, a pre-combustion CO2 capture pilot plant was built and operated at the Buggenum IGCC power plant, the Netherlands. The pilot consist of sweet water-gas shift, physical CO2 absorption and CO2 compression. The technology performance was verified and validat

  10. Water-gas shift (WGS) Operation of Pre-combustion CO2 Capture Pilot Plant at the Buggenum IGCC

    NARCIS (Netherlands)

    Van Dijk, H.A.J.; Damen, K.; Makkee, M.; Trapp, C.

    2014-01-01

    In the Nuon/Vattenfall CO2 Catch-up project, a pre-combustion CO2 capture pilot plant was built and operated at the Buggenum IGCC power plant, the Netherlands. The pilot consist of sweet water-gas shift, physical CO2 absorption and CO2 compression. The technology performance was verified and

  11. Water-gas shift (WGS) Operation of Pre-combustion CO2 Capture Pilot Plant at the Buggenum IGCC

    NARCIS (Netherlands)

    Van Dijk, H.A.J.; Damen, K.; Makkee, M.; Trapp, C.

    2014-01-01

    In the Nuon/Vattenfall CO2 Catch-up project, a pre-combustion CO2 capture pilot plant was built and operated at the Buggenum IGCC power plant, the Netherlands. The pilot consist of sweet water-gas shift, physical CO2 absorption and CO2 compression. The technology performance was verified and validat

  12. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, Steven M.; Adumitroaie, Virgil; McDaniel, Keith S.; Smith, Clifford E.

    2001-11-06

    In this project, an advanced computational software tool will be developed for the design of low emission combustion systems required for Vision 21 clean energy plants. This computational tool will utilize Large Eddy Simulation (LES) methods to predict the highly transient nature of turbulent combustion. The time-accurate software will capture large scale transient motion, while the small scale motion will be modeled using advanced subgrid turbulence and chemistry closures. This three-year project is composed of: Year 1--model development/implementation, Year 2--software alpha validation, and Year 3--technology transfer of software to industry including beta testing. In this first year of the project, subgrid models for turbulence and combustion are being developed through university research (Suresh Menon-Georgia Tech and J.-Y. Chen- UC Berkeley) and implemented into a leading combustion CFD code, CFD-ACE+. The commercially available CFDACE+ software utilizes unstructured , parallel architecture and 2nd-order spatial and temporal numerics. To date, the localized dynamic turbulence model and reduced chemistry models (up to 19 species) for natural gas, propane, hydrogen, syngas, and methanol have been incorporated. The Linear Eddy Model (LEM) for subgrid combustion-turbulence interaction has been developed and implementation into CFD-ACE+ has started. Ways of reducing run-time for complex stiff reactions is being studied, including the use of in situ tabulation and neural nets. Initial validation cases have been performed. CFDRC has also completed the integration of a 64 PC cluster to get highly scalable computing power needed to perform the LES calculations ({approx} 2 million cells) in several days. During the second year, further testing and validation of the LES software will be performed. Researchers at DOE-NETL are working with CFDRC to provide well-characterized high-pressure test data for model validation purposes. To insure practical, usable software is

  13. Second-generation pressurized fluidized-bed combustion plant: Conceptual design and optimization of a second-generation PFB combustion plant. Phase 2, Annual report, October 1991--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, A.; Domeracki, W.; Newby, R.; Rehmat, A.; Horazak, D.

    1992-10-01

    After many years of experimental testing and development work, coal-fired pressurized fluidized bed (PFB) combustion combined-cycle power plants are moving toward reality. Under the US Department of Energy`s Clean Coal Technology Program, a 70-MWe PFB combustion retrofit, utilizing a 1525{degrees}F gas turbine inlet temperature, has been built and operated as a demonstration plant at the American Electric Power Company`s Tidd Plant in Brilliant, Ohio. As PFB combustion technology moves closer and closer to commercialization, interest is turning toward the development of an even more efficient and more cost-effective PFB combustion plant. The targeted goals of this ``second-generation`` plant are a 45-percent efficiency and a cost of electricity (COE) that is at least 20 percent lower than the COE of a conventional pulverized-coal (PC)-fired plant with stack gas scrubbing. In addition, plant emissions should be within New Source Performance Standards (NSPS) and the plant should have high availability, be able to burn different ranks of coal, and incorporate modular construction technologies. In response to this need, a team of companies led by Foster Wheeler Development Corporation (FWDC). The key components in the proposed second-generation plant are the carbonizer, CPFBC, ceramic cross-flow filter, and topping combustor. Unfortunately, none of these components has been operated at proposed plant operating conditions, and experimental tests must be conducted to explore/determine their performance throughout the proposed plant operating envelope. The major thrust of Phase 2 is to design, construct, test, and evaluate the performance of the key components of the proposed plant.

  14. Review: Circulation of Inorganic Elements in Combustion of Alternative Fuels in Cement Plants

    DEFF Research Database (Denmark)

    Cortada Mut, Maria del Mar; Nørskov, Linda Kaare; Jappe Frandsen, Flemming;

    2015-01-01

    Cement production is an energy-intensive process, which traditionally has been dependent on fossil fuels. However, the use of alternative fuels, i.e., selected waste, biomass, and byproducts with recoverable calorific value, is constantly increasing. Combustion of these fuels is more challenging......, compared to fossil fuels, because of a lack of experience and different chemical and physical properties. When complete oxidation Of fuels in the calciner and main burner is not achieved, they burn in direct contact with the bed material of the rotary kiln, causing local reducing conditions and increasing...... the internal circulation of S, Cl, Na, and K. Compounds containing these elements, such as alkali salts, evaporate when exposed to high temperatures and subsequently condense in colder parts of the plant. The transformation of the volatile inorganic species at different locations in the cement plant...

  15. Synthesis of Y-junction carbon nanofibres by ethanol catalytic combustion technique

    Institute of Scientific and Technical Information of China (English)

    LI Fei; ZOU Xiao-ping; CHENG Jin; ZHANG Hong-dan; REN Peng-fei

    2006-01-01

    Y-shaped structure was synthesized by ethanol catalytic combustion(ECC) technique on the copper plate substrate,without directly seeding catalyst into the flame. The as-grown Y-junction carbon nanofibres were investigated by transmission electron microscopy (TEM). The very common laboratory ethanol burner was used for synthesizing carbon nanofibres. Two kinds of the catalyst precursor,which are iron nitrate (Fe(NO3)3) and nickel nitrate (Ni(NO3)2),were respectively employed to assist the formation of Y-junction carbon nanofibres. TEM analysis confirm the formation of Y-junction in the coiled and noncoiled carbon nanofibres. The type of the catalyst is found to be crucial to grow different Y-junction carbon nanofibres. Different Y-shaped structure may possess different mechanical and electronic properties. These three-terminal nanofibres provide the nanoelectronics community with a novel material for the development of molecular-scale electronic devices.

  16. Numerical analysis of the thermo-fluid-dynamic field in the combustion chamber of an incinerator plant

    Energy Technology Data Exchange (ETDEWEB)

    Costa, M. [Istituto Motori, Consiglio Nazionale delle Ricerche - Viale Marconi 8, 80125 Napoli (Italy); Dell' Isola, M.; Massarotti, N. [Dipartimento di Meccanica, Strutture, Ambiente e Territorio (DiMSAT) Universita degli Studi di Cassino - Via G. Di Biasio, 43, 03043 Cassino (Italy)

    2009-12-15

    As the interest for energy recovery from waste incineration has increased over the years, concern for the impact such processes have on the environment has also grown. To reduce such an impact, the legislation enforced in Italy and Europe imposes important restrictions on the temperature of the exhausts in the combustion chamber, which must be kept above certain values depending on the type of waste that is being incinerated, for a given period of time. Such conditions can be rather difficult and certainly very expensive to monitor with acceptable accuracy. In this work, a numerical approach is presented for modelling waste combustion in a full scale incineration plant. Both solid and gas phase reactions are considered. Various modes of heat and mass transfer between the waste bed, the air and the combustion products are taken into account, as well as radiation from the combustion chamber walls and the combustion products. The temperature distribution in the combustion chamber is obtained considering either forced or mixed convection. It is therefore shown that neglecting buoyancy effects may lead to appreciable errors. Verification of the code performance is based on comparison with the results of an experimental campaign at a full scale plant in Italy. (author)

  17. Fuel-Flexible Combustion System for Co-production Plant Applications

    Energy Technology Data Exchange (ETDEWEB)

    Joel Haynes; Justin Brumberg; Venkatraman Iyer; Jonathan Janssen; Ben Lacy; Matt Mosbacher; Craig Russell; Ertan Yilmaz; Williams York; Willy Ziminsky; Tim Lieuwen; Suresh Menon; Jerry Seitzman; Ashok Anand; Patrick May

    2008-12-31

    Future high-efficiency, low-emission generation plants that produce electric power, transportation fuels, and/or chemicals from fossil fuel feed stocks require a new class of fuel-flexible combustors. In this program, a validated combustor approach was developed which enables single-digit NO{sub x} operation for a future generation plants with low-Btu off gas and allows the flexibility of process-independent backup with natural gas. This combustion technology overcomes the limitations of current syngas gas turbine combustion systems, which are designed on a site-by-site basis, and enable improved future co-generation plant designs. In this capacity, the fuel-flexible combustor enhances the efficiency and productivity of future co-production plants. In task 2, a summary of market requested fuel gas compositions was created and the syngas fuel space was characterized. Additionally, a technology matrix and chemical kinetic models were used to evaluate various combustion technologies and to select two combustor concepts. In task 4 systems analysis of a co-production plant in conjunction with chemical kinetic analysis was performed to determine the desired combustor operating conditions for the burner concepts. Task 5 discusses the experimental evaluation of three syngas capable combustor designs. The hybrid combustor, Prototype-1 utilized a diffusion flame approach for syngas fuels with a lean premixed swirl concept for natural gas fuels for both syngas and natural gas fuels at FA+e gas turbine conditions. The hybrid nozzle was sized to accommodate syngas fuels ranging from {approx}100 to 280 btu/scf and with a diffusion tip geometry optimized for Early Entry Co-generation Plant (EECP) fuel compositions. The swozzle concept utilized existing GE DLN design methodologies to eliminate flow separation and enhance fuel-air mixing. With changing business priorities, a fully premixed natural gas & syngas nozzle, Protoytpe-1N, was also developed later in the program. It did

  18. Coal slurry solids/coal fluidized bed combustion by-product mixtures as plant growth media

    Science.gov (United States)

    Darmody, R.G.; Green, W.P.; Dreher, G.B.

    1998-01-01

    Fine-textured, pyritic waste produced by coal cleaning is stored in slurry settling ponds that eventually require reclamation. Conventionally, reclamation involves covering the dewatered coal slurry solids (CSS) with 1.3 m of soil to allow plant growth and prevent acid generation by pyrite oxidation. This study was conducted to determine the feasiblity of a less costly reclamation approach that would eliminate the soil cover and allow direct seeding of plants into amended CSS materials. Potential acidity of the CSS would be neutralized by additions of fluidized-bed combustion by-product (FBCB), an alkaline by-product of coal combustion. The experiment involved two sources of CSS and FBCB materials from Illinois. Birdsfoot trefoil (Lotus corniculatus L.), tall fescue (Festuca arundinacea Schreb.), and sweet clover (Melilotus officinalis (L.) Lam.) were seeded in the greenhouse into pots containing mixtures of the materials. CSS-1 had a high CaCO3:FeS2 ratio and needed no FBCB added to compensate for its potential acidity. CSS-2 was mixed with the FBCB materials to neutralize potential acidity (labeled Mix A and B). Initial pH was 5.6, 8.8, and 9.2 for the CSS-1, Mix A, and Mix B materials, respectively. At the end of the 70-day experiment, pH was 5.9 for all mixtures. Tall fescue and sweet clover grew well in all the treatments, but birdsfoot trefoil had poor emergence and survival. Elevated tissue levels of B, Cd, and Se were found in some plants. Salinity, low moisture holding capacity, and potentially phytotoxic B may limit the efficacy of this reclamation method.

  19. Standard technical specifications: Combustion engineering plants. Volume 1, Revision 1: Specifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for Combustion Engineering Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes. Volume 1 contains the Specifications for all chapters and sections of the improved STS. Volume 2 contains the Bases for Chapters 2.0 and 3.0, and Sections 3.1--3.3 of the improved STS. Volume 3 contains the Bases for Sections 3.4--3.9 of the improved STS.

  20. Integration between a demo size post-combustion CO2 capture and full size power plant: an integral approach on energy penalty for different process options

    NARCIS (Netherlands)

    Miguel Mercader, F. de; Magneschi, G.; Sanchez Fernandez, E.; Stienstra, G.J.; Goetheer, E.L.V.

    2012-01-01

    CO2 capture based on post-combustion capture has the potential to significantly reduce the CO2 emissions from coal-fired power plants. However, this capture process reduces considerably the energy efficiency of the power plant. To reduce this energy penalty, this paper studies different post-combust

  1. 关于电站锅炉燃烧优化技术的研究%Research on Power Plant Boiler Combustion Optimization Technology

    Institute of Scientific and Technical Information of China (English)

    赵永强

    2013-01-01

    火力发电厂中向汽轮发电机组提供蒸汽的锅炉,主要包括锅炉本体和一些辅助设备。燃料在锅炉的炉膛中燃烧释放热能,经过金属壁面传热使锅炉中的水转化成具有一定压力和温度的过热蒸汽,随后把蒸汽送入汽轮机,由汽轮驱动进行发电。燃烧优化技术能够有效提高锅炉燃烧的效率并减少污染。本文重点分析了电站锅炉燃烧优化技术。%Coal-fired power plant provides steam to steam turbine unit; it mainly includes boiler body and some auxiliary equipment. Fuel burns and release heat in the furnace of the boiler, metal wall transfer heat and convert the water into a certain pressure and temperature of superheated steam, and then enter into the steam turbine, drive steam turbine to generate electricity. Combustion optimization technology can effectively improve the efficiency of the boiler combustion and reduce pollution. This paper analyzes the power plant boiler combustion optimization techniques.

  2. Obtaining zeolites from slags and ashes from a waste combustion plant in an autoclave process

    Directory of Open Access Journals (Sweden)

    Grela Agnieszka

    2017-01-01

    Full Text Available Waste combustion is associated with the generation of post-processing solid products – waste such as slag and ash. One of the promising technologies in waste management and processing is the synthesis of zeolites and other materials exhibiting sorption properties. The aim of this study was to characterise and assess the physicochemical properties of the waste and the products synthesised from it. This paper presents the possibility of synthesis zeolites from the slag and ash from two waste combustion plants. The investigated waste is classified as hazardous waste and denoted by the EWC code 190111*. The paper presents the results of physicochemical studies of these materials. As a result of synthesis in an autoclave at 140°C with the use of 2 M NaOH, and other compounds, such zeolite forms as chabazite and sodalite were obtained. Textural studies and ion-exchange capacity investigations carried out allowed characterisation of the sorption properties of the materials. It was found that the materials obtained are characterised by the BET specific surface areas of 25.45 m2/g and 16.79 m2/g.

  3. Experimental study on cement clinker co-generation in pulverized coal combustion boilers of power plants.

    Science.gov (United States)

    Wang, Wenlong; Luo, Zhongyang; Shi, Zhenglun; Cen, Kefa

    2006-06-01

    The idea to co-generate cement clinker in pulverized coal combustion (PCC) boilers of power plants is introduced and discussed. An experimental study and theoretical analysis showed this idea to be feasible and promising. By adding quick lime as well as other mineralizers to the coal and grinding the mixture before combustion, sulfoaluminate cement clinker with a high content of silicate (SCCHS) could be generated. The main mineral phases in SCCHS are 2CaO x SiO2 (dicalcium-silicate), 3CaO x 3Al2O3 x CaSO4 (calcium-sulfoaluminate) and 2CaO x A12O3 SiO2 (gehlenite). Performance tests showed that the SCCHS met the requirements for utilization in common construction. Based on this idea, zero solid waste generation from PCC would be realized. Furthermore, thermal power production and cement production could be combined, and this would have a significant effect on both environmental protection and natural resource saving.

  4. Co-combustion of Wood-Shavings and Horse Manure in a Small Scale Heating Plant

    Energy Technology Data Exchange (ETDEWEB)

    Pettersson, E. [Energy Technology Centre, Piteaa (Sweden); Lundgren, J.; Hermansson, R. [Luleaa Univ. of Technology (Sweden). Div. of Energy Engineering

    2006-07-15

    Due to the prohibition of disposal of organic material at landfills, there is a great interest amongst stable owners in finding practical, environmental and economic alternatives for handling of the horse manure. One option is to use the waste as fuel for local heat generation. A riding school, near the town of Timraa in the middle part of Sweden, has installed a boiler fired with a mixture of wood-shavings and horse manure. The main objectives with this study were to evaluate the environmental performance of the furnace and the total economy of the plant. The measurements showed that the emissions of CO were relatively low, typically below 200 mg/Nm{sup 3}. The NO{sub x} emissions were in the range of 360 mg/Nm{sup 3} to 450 mg/Nm{sup 3}, which is significantly higher than when firing conventional wood fuels. The reason is that this fuel contains up to nine times more nitrogen than for example wood-chips due to absorbed urine from the horses. The particle emissions were in the range of 390 mg/Nm{sup 3} to 470 mg/Nm{sup 3}. (All emission values are dry gas based and normalised to 10 volume % O{sub 2}). An economic evaluation comparing combustion, composting at a waste station and direct spread on arable land showed the lowest annual cost for combustion. This is an example of turning a cumbersome waste product into a profitable fuel.

  5. Numerical investigation of the flow inside the combustion chamber of a plant oil stove

    Science.gov (United States)

    Pritz, B.; Werler, M.; Wirbser, H.; Gabi, M.

    2013-10-01

    Recently a low cost cooking device for developing and emerging countries was developed at KIT in cooperation with the company Bosch und Siemens Hausgeräte GmbH. After constructing an innovative basic design further development was required. Numerical investigations were conducted in order to investigate the flow inside the combustion chamber of the stove under variation of different geometrical parameters. Beyond the performance improvement a further reason of the investigations was to rate the effects of manufacturing tolerance problems. In this paper the numerical investigation of a plant oil stove by means of RANS simulation will be presented. In order to reduce the computational costs different model reduction steps were necessary. The simulation results of the basic configuration compare very well with experimental measurements and problematic behaviors of the actual stove design could be explained by the investigation.

  6. OCTAVIUS: evaluation of flexibility and operability of amine based post combustion CO2 capture at the Brindisi Pilot Plant

    NARCIS (Netherlands)

    Mangiaracina, A.; Zangrilli, L.; Robinson, L.; Kvamsdal, H.M.; Os, P.J. van

    2014-01-01

    Solvent storage is an option for amine based post combustion capture that can be used to de-couple the capture of CO2 and the energy demand of the process. In this process, electricity output of a power station is temporarily increased by diverting steam from the CO2 capture plant back to the steam

  7. OCTAVIUS: evaluation of flexibility and operability of amine based post combustion CO2 capture at the Brindisi Pilot Plant

    NARCIS (Netherlands)

    Mangiaracina, A.; Zangrilli, L.; Robinson, L.; Kvamsdal, H.M.; Os, P.J. van

    2014-01-01

    Solvent storage is an option for amine based post combustion capture that can be used to de-couple the capture of CO2 and the energy demand of the process. In this process, electricity output of a power station is temporarily increased by diverting steam from the CO2 capture plant back to the steam

  8. CO2 post-combustion capture in coal-fired power plants integrated with solar systems

    Science.gov (United States)

    Carapellucci, R.; Giordano, L.; Vaccarelli, M.

    2015-11-01

    The majority of the World's primary energy consumption is still based on fossil fuels, representing the largest source of global CO2 emissions. According to the Intergovernmental Panel on Climate Change (IPCC), such emissions must be significantly reduced in order to avoid the dramatic consequences of global warming. A potential way to achieve this ambitious goal is represented by the implementation of CCS (Carbon Capture and Storage) technologies. However, the significant amount of energy required by the CCS systems still represents one the major barriers for their deployment. Focusing on post-combustion capture based on amine absorption, several interesting options have been investigated to compensate the energy losses due to solvent regeneration, also using renewable energy sources. One of the most promising is based on the use of concentrating solar power (CSP), providing a part of the energy requirement of the capture island. In this study the integration of a CSP system into a coal-fired power plant with CO2 postcombustion capture is investigated. Basically, a CSP system is used to support the heat requirement for amine regeneration, by producing saturated steam at low temperature. This allows to reduce or even eliminate the conventional steam extraction from the main power plant, affecting positively net power production and efficiency. The energy analysis of the whole system is carried out using the GateCycle software to simulate the coal-fired power plant and ChemCad platform for the CO2 capture process based on amine absorption.

  9. REAL TIME PULVERISED COAL FLOW SOFT SENSOR FOR THERMAL POWER PLANTS USING EVOLUTIONARY COMPUTATION TECHNIQUES

    Directory of Open Access Journals (Sweden)

    B. Raja Singh

    2015-01-01

    Full Text Available Pulverised coal preparation system (Coal mills is the heart of coal-fired power plants. The complex nature of a milling process, together with the complex interactions between coal quality and mill conditions, would lead to immense difficulties for obtaining an effective mathematical model of the milling process. In this paper, vertical spindle coal mills (bowl mill that are widely used in coal-fired power plants, is considered for the model development and its pulverised fuel flow rate is computed using the model. For the steady state coal mill model development, plant measurements such as air-flow rate, differential pressure across mill etc., are considered as inputs/outputs. The mathematical model is derived from analysis of energy, heat and mass balances. An Evolutionary computation technique is adopted to identify the unknown model parameters using on-line plant data. Validation results indicate that this model is accurate enough to represent the whole process of steady state coal mill dynamics. This coal mill model is being implemented on-line in a 210 MW thermal power plant and the results obtained are compared with plant data. The model is found accurate and robust that will work better in power plants for system monitoring. Therefore, the model can be used for online monitoring, fault detection, and control to improve the efficiency of combustion.

  10. Improved electrical efficiency and bottom ash quality on waste combustion plants. Appendix A11 to A14

    Energy Technology Data Exchange (ETDEWEB)

    Hedegaard Madsen, O.; Boejer, M.; Jensen, Peter A.; Dam-Johansen, K.; Lundtorp, K. (Technical Univ. of Denmark, Kgs. Lyngby (Denmark)); Mogensen, Erhardt (Babcock and Wilcox Voelund A/S, Glostrup (Denmark))

    2010-07-01

    Investigations making it possible to evaluate and further develop concepts to improve electrical efficiency in a waste combustion plant were performed. Furthermore, one objective of the study was to investigate the possibilities of improving waste bottom ash leaching properties by use of a rotary kiln treatment. The project work included construction of a bench-scale rotary kiln, performing ash rotary kiln treatment experiments, conducting gas suction probe measurements on a waste incineration plant and making some concept evaluations. The influence of the rotary kiln thermal treatment on the leaching of Ca, Al, Si, Mg, Ba, Sr, Cl, Cu, Pb, Zn, Cr, Mo, sulfate, DOC and carbonate was determined. As a result of these tests, the rotary kiln thermal treatment of bottom ashes can be recommended for reducing the leaching of Cu, Pb, Cl, Zn and DOC; however, an increased leaching of Cr and Mo should be expected. The combustion conditions above the grate of a waste incineration plant were investigated and the release and concentration of volatile ash species in the flue gas such as Cl, Na, K, Ca, Pb, Zn and S were measured. The conducted measurements show that flue gas from grate sections 3 and 4 can produce a sufficiently hot flue gas that contains only low concentrations of corrosive species, and therefore can be used to increase superheater temperatures. Implementation of the so-called flue gas split concept together with other steam circle modifications on a waste combustion plant, and using a reasonable increase in final steam temperature from 400 to 500 deg. C, have the potential to increase electrical efficiency from 24 to 30% (with respect to lower fuel heating value) in a waste combustion plant. The appendices deal with electrical efficiency by dividing the combustion products; release of potentially corrosive constituents from the grate; CFD modeling of grate with and without vertical divider. (Author)

  11. Techniques for Analysis of Plant Phenolic Compounds

    OpenAIRE

    Roberts, Thomas H.; Meredith A. Wilkes; Ali Khoddami

    2013-01-01

    Phenolic compounds are well-known phytochemicals found in all plants. They consist of simple phenols, benzoic and cinnamic acid, coumarins, tannins, lignins, lignans and flavonoids. Substantial developments in research focused on the extraction, identification and quantification of phenolic compounds as medicinal and/or dietary molecules have occurred over the last 25 years. Organic solvent extraction is the main method used to extract phenolics. Chemical procedures are used to detect the pre...

  12. Fuel-Flexible Combustion System for Refinery and Chemical Plant Process Heaters

    Energy Technology Data Exchange (ETDEWEB)

    Benson, Charles; Wilson, Robert

    2014-04-30

    This project culminated in the demonstration of a full-scale industrial burner which allows a broad range of “opportunity” gaseous fuels to be cost-effectively and efficiently utilized while generating minimal emissions of criteria air pollutants. The burner is capable of maintaining a stable flame when the fuel composition changes rapidly. This enhanced stability will contribute significantly to improving the safety and reliability of burner operation in manufacturing sites. Process heating in the refining and chemicals sectors is the primary application for this burner. The refining and chemical sectors account for more than 40% of total industrial natural gas use. Prior to the completion of this project, an enabling technology did not exist that would allow these energy-intensive industries to take full advantage of opportunity fuels and thereby reduce their natural gas consumption. Opportunity gaseous fuels include biogas (from animal and agricultural wastes, wastewater plants, and landfills) as well as syngas (from the gasification of biomass, municipal solid wastes, construction wastes, and refinery residuals). The primary challenge to using gaseous opportunity fuels is that their composition and combustion performance differ significantly from those of conventional fuels such as natural gas and refinery fuel gas. An effective fuel-flexible burner must accept fuels that range widely in quality and change in composition over time, often rapidly. In Phase 1 of this project, the team applied computational fluid dynamics analysis to optimize the prototype burner’s aerodynamic, combustion, heat transfer, and emissions performance. In Phase 2, full-scale testing and refinement of two prototype burners were conducted in test furnaces at Zeeco’s offices in Broken Arrow, OK. These tests demonstrated that the full range of conventional and opportunity fuels could be utilized by the project’s burner while achieving robust flame stability and very low levels of

  13. Improved repowering techniques for power plants

    DEFF Research Database (Denmark)

    Houbak, Niels; Andersen, Simon E.; Petersen, Stiig Bo

    1998-01-01

    Repowering of existing coal-fired power plants is often accomplished by adding gas turbines. In this paper we assume that the gas turbine exhaust is used for feed water preheating.Typical gas turbine exhaust temperatures are in the range 450-600C whereas typical boiler inlet temperatures are 250......-300C. The big difference in temperature between exhaust and water prevents an efficient exchange of heat. One way to lower the exhaust temperature is to expand the gas to sub atmospheric pressure. The result is a 50% increase in possible installed gas turbine power....

  14. FutureGen 2.0 Oxy-Coal Combustion Carbon Capture Plant Pre-FEED Design and Cost

    Energy Technology Data Exchange (ETDEWEB)

    Flanigan, Tom; Pybus, Craig; Roy, Sonya; Lockwood, Frederick; McDonald, Denny; Maclnnis, Jim

    2011-09-30

    This report summarizes the results of the Pre-Front End Engineering Design (pre-FEED) phase of a proposed advanced oxy-combustion power generation plant to repower the existing 200 MWe Unit 4 at Ameren Energy Resources’ (AER) Meredosia Power Plant. AER has formed an alliance with Air Liquide Process and Construction, Inc. (ALPC) and Babcock & Wilcox Power Generation Group (B&W PGG) for the design, construction, and testing of the facility, and has contracted with URS Corporation (URS) for preliminary design and Owner’s engineering services. The Project employs oxy-combustion technology – combustion of coal with nearly pure oxygen and recycled flue gas (instead of air) – to capture approximately 90% of the flue gas CO2 for transport and sequestration by another Project. Plant capacity and configuration has been developed based on the B&W PGG-ALPC cool recycle process firing high-sulfur bituminous coal fuel, assuming baseload plant operation to maximize existing steam turbine capability, with limited consideration for plant redundancy and performance optimization in order to keep plant costs as low as practical. Activities and preliminary results from the pre-FEED phase addressed in this report include the following: Overall plant thermal performance; Equipment sizing and system configuration; Plant operation and control philosophy; Plant emissions and effluents; CO2 production and recovery characteristics; Project cost estimate and economic evaluation; Integrated project engineering and construction schedule; Project risk and opportunity assessment; Development of Project permitting strategy and requirements During the Phase 2 of the Project, additional design details will be developed and the Phase 1 work products updated to support actual construction and operation of the facility in Phase 3. Additional information will be provided early in Phase 2 to support Ameren-Environmental in finalizing the appropriate permitting strategies and permit

  15. Comparative Techno-economic assessment of biomass and coal with CCS technologies in a pulverized combustion power plant in the United Kingdom

    OpenAIRE

    Al-Qayim, K.; Nimmo, W.; Pourkashanian, M

    2015-01-01

    The technical performance and cost effectiveness of white wood pellets (WWP) combustion in comparison to three types of coal namely U.S., Russian and Colombian coals are investigated in this study. Post-combustion capture and storage (CCS) namely with amine FG+, and oxy-fuel with carbon capture and storage (oxy-fuel) are applied to a 650 MW pulverized combustion (PC) plant. The impacts of the Renewable Obligation Certificate (ROC) and carbon price (CP) policy in accelerating the CCS deploymen...

  16. Straw quality for its combustion in a straw-fired power plant

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Allica, J.; Blanco, F.; Garbisu, C. [NEIKER, Instituto Vasco de Investigacion y Desarrollo Agrario, Derio (Spain); Mitre, A.J.; Gonzalez Bustamante, J.A. [IBERDROLA Ingenieria y Consultoria, Bilbao (Spain); Itoiz, C. [Energia Hidroelectrica de Navarra, Pamplona (Spain); Alkorta, I. [Universidad del Pais Vasco, Bilbao (Spain). Facultad de Ciencias

    2001-07-01

    ENERGIA HIDROELECTRICA DE NAVARRA, S.A. (Navarra, Spain) is erecting a 25 MW power generation plant using straw for electricity generation. Cereal straws have proved to be difficult to burn in most existing combustion systems. During the last two years, a study has been carried out in Navarra to investigate the possibilities of improving the fuel quality of straw by a reduction in its K{sup +} and Cl{sup -} contents. The simple leaching of K{sup +} and Cl{sup -} with water by exposure to natural rainfall in the field resulted in considerable reductions of these two elements. A reduction in the K{sup +} content of the cereal plants caused by exposure to natural rainfall has been observed during plant ripening (before crop harvesting). Some varieties of straw show lower initial K{sup +} contents, making them more suitable for this purpose. There seems to be no clear correlation between the relative decrease in K{sup +} content and the amount of accumulated rainfall. Our results have also shown a very close correlation between K{sup +} content and electrical conductivity. The simplicity of this latter measurement makes this parameter a very interesting option to test the straw quality directly in the field. Structural components of the straw were not decomposed during the time when we left the straw in the field. Finally, the Cl{sup -} content in straw was increased when the Cl{sup -} dose from the fertiliser was increased. On the other hand, the content of K{sup +} was not influenced by the applied amount of K{sup +} fertiliser. (Author)

  17. Improved electrical efficiency and bottom ash quality on waste combustion plants. Appendix A7 to A10

    Energy Technology Data Exchange (ETDEWEB)

    Hyks, J.; Astrup, T.; Jensen, Peter A.; Nesterov, I.; Boejer, M.; Frandsen, F.; Dam-Johansen, K.; Hedegaard Madsen, O.; Lundtorp, K. (Technical Univ. of Denmark, Kgs. Lyngby (Denmark)); Mogensen, Erhardt (Babcock and Wilcox Voelund A/S, Glostrup (Denmark))

    2010-07-01

    Investigations making it possible to evaluate and further develop concepts to improve electrical efficiency in a waste combustion plant were performed. Furthermore, one objective of the study was to investigate the possibilities of improving waste bottom ash leaching properties by use of a rotary kiln treatment. The project work included construction of a bench-scale rotary kiln, performing ash rotary kiln treatment experiments, conducting gas suction probe measurements on a waste incineration plant and making some concept evaluations. The influence of the rotary kiln thermal treatment on the leaching of Ca, Al, Si, Mg, Ba, Sr, Cl, Cu, Pb, Zn, Cr, Mo, sulfate, DOC and carbonate was determined. As a result of these tests, the rotary kiln thermal treatment of bottom ashes can be recommended for reducing the leaching of Cu, Pb, Cl, Zn and DOC; however, an increased leaching of Cr and Mo should be expected. The combustion conditions above the grate of a waste incineration plant were investigated and the release and concentration of volatile ash species in the flue gas such as Cl, Na, K, Ca, Pb, Zn and S were measured. The conducted measurements show that flue gas from grate sections 3 and 4 can produce a sufficiently hot flue gas that contains only low concentrations of corrosive species, and therefore can be used to increase superheater temperatures. Implementation of the so-called flue gas split concept together with other steam circle modifications on a waste combustion plant, and using a reasonable increase in final steam temperature from 400 to 500 deg. C, have the potential to increase electrical efficiency from 24 to 30% (with respect to lower fuel heating value) in a waste combustion plant. The appendices deal with the influence of kiln treatment on incineration bottom ash leaching; the influence of kiln treatment on corrosive species in deposits; operational strategy for rotary kiln; alkali/chloride release during refuse incineration on a grate. (Author)

  18. Improved electrical efficiency and bottom ash quality on waste combustion plants. Appendix A1 to A3

    Energy Technology Data Exchange (ETDEWEB)

    Nesterov, I.; Jensen, Peter A.; Dam-Johansen, K.; Kloeft, H.; Boejer, M. (Technical Univ. of Denmark, Kgs. Lyngby (Denmark)); Mogensen, Erhardt (Babcock and Wilcox Voelund A/S, Esbjerg (Denmark))

    2010-07-01

    Investigations making it possible to evaluate and further develop concepts to improve electrical efficiency in a waste combustion plant were performed. Furthermore, one objective of the study was to investigate the possibilities of improving waste bottom ash leaching properties by use of a rotary kiln treatment. The project work included construction of a bench-scale rotary kiln, performing ash rotary kiln treatment experiments, conducting gas suction probe measurements on a waste incineration plant and making some concept evaluations. The influence of the rotary kiln thermal treatment on the leaching of Ca, Al, Si, Mg, Ba, Sr, Cl, Cu, Pb, Zn, Cr, Mo, sulfate, DOC and carbonate was determined. As a result of these tests, the rotary kiln thermal treatment of bottom ashes can be recommended for reducing the leaching of Cu, Pb, Cl, Zn and DOC; however, an increased leaching of Cr and Mo should be expected. The combustion conditions above the grate of a waste incineration plant were investigated and the release and concentration of volatile ash species in the flue gas such as Cl, Na, K, Ca, Pb, Zn and S were measured. The conducted measurements show that flue gas from grate sections 3 and 4 can produce a sufficiently hot flue gas that contains only low concentrations of corrosive species, and therefore can be used to increase superheater temperatures. Implementation of the so-called flue gas split concept together with other steam circle modifications on a waste combustion plant, and using a reasonable increase in final steam temperature from 400 to 500 deg. C, have the potential to increase electrical efficiency from 24 to 30% (with respect to lower fuel heating value) in a waste combustion plant. The appendices deal with incineration bottom ash leaching properties; design and construction of rotary kiln facility; manual to rotary kiln experiments. (Author)

  19. Improved electrical efficiency and bottom ash quality on waste combustion plants. Appendix A4 to A6

    Energy Technology Data Exchange (ETDEWEB)

    Kloeft, H.; Jensen, Peter A.; Nesterov, I.; Hyks, J.; Astrup, T. (Technical Univ. of Denmark, Kgs. Lyngby (Denmark)); Mogensen, Erhardt (Babcock and Wilcox Voelund A/S, Glostrup (Denmark))

    2010-07-01

    Investigations making it possible to evaluate and further develop concepts to improve electrical efficiency in a waste combustion plant were performed. Furthermore, one objective of the study was to investigate the possibilities of improving waste bottom ash leaching properties by use of a rotary kiln treatment. The project work included construction of a bench-scale rotary kiln, performing ash rotary kiln treatment experiments, conducting gas suction probe measurements on a waste incineration plant and making some concept evaluations. The influence of the rotary kiln thermal treatment on the leaching of Ca, Al, Si, Mg, Ba, Sr, Cl, Cu, Pb, Zn, Cr, Mo, sulfate, DOC and carbonate was determined. As a result of these tests, the rotary kiln thermal treatment of bottom ashes can be recommended for reducing the leaching of Cu, Pb, Cl, Zn and DOC; however, an increased leaching of Cr and Mo should be expected. The combustion conditions above the grate of a waste incineration plant were investigated and the release and concentration of volatile ash species in the flue gas such as Cl, Na, K, Ca, Pb, Zn and S were measured. The conducted measurements show that flue gas from grate sections 3 and 4 can produce a sufficiently hot flue gas that contains only low concentrations of corrosive species, and therefore can be used to increase superheater temperatures. Implementation of the so-called flue gas split concept together with other steam circle modifications on a waste combustion plant, and using a reasonable increase in final steam temperature from 400 to 500 deg. C, have the potential to increase electrical efficiency from 24 to 30% (with respect to lower fuel heating value) in a waste combustion plant. The appendices deal with collection of slags for the rotary kiln experiments; overview of the thermal treatment experiments - phase 1; a journal paper with the title ''Quantification of leaching from waste incineration bottom ash treated in a rotary kiln

  20. Molecular hydrogen (H2) combustion emissions and their isotope (D/H) signatures from domestic heaters, diesel vehicle engines, waste incinerator plants, and biomass burning

    NARCIS (Netherlands)

    Vollmer, M.K.; Walter, S.; Mohn, J.; Steinbacher, M.; Bond, S.W.; Röckmann, T.; Reimann, S.

    2012-01-01

    Molecular hydrogen (H2), its stable isotope signature ( D), and the key combustion parameters carbon monoxide (CO), carbon dioxide (CO2), and methane (CH4) were measured from various combustion processes. H2 in the exhaust of gas and oil-fired heaters and of waste incinerator plants was generally de

  1. Molecular hydrogen (H2) combustion emissions and their isotope (D/H) signatures from domestic heaters, diesel vehicle engines, waste incinerator plants, and biomass burning

    NARCIS (Netherlands)

    Vollmer, M.K.; Walter, S.; Mohn, J.; Steinbacher, M.; Bond, S.W.; Röckmann, T.; Reimann, S.

    2012-01-01

    Molecular hydrogen (H2), its stable isotope signature ( D), and the key combustion parameters carbon monoxide (CO), carbon dioxide (CO2), and methane (CH4) were measured from various combustion processes. H2 in the exhaust of gas and oil-fired heaters and of waste incinerator plants was generally

  2. A review of imaging techniques for plant phenotyping.

    Science.gov (United States)

    Li, Lei; Zhang, Qin; Huang, Danfeng

    2014-10-24

    Given the rapid development of plant genomic technologies, a lack of access to plant phenotyping capabilities limits our ability to dissect the genetics of quantitative traits. Effective, high-throughput phenotyping platforms have recently been developed to solve this problem. In high-throughput phenotyping platforms, a variety of imaging methodologies are being used to collect data for quantitative studies of complex traits related to the growth, yield and adaptation to biotic or abiotic stress (disease, insects, drought and salinity). These imaging techniques include visible imaging (machine vision), imaging spectroscopy (multispectral and hyperspectral remote sensing), thermal infrared imaging, fluorescence imaging, 3D imaging and tomographic imaging (MRT, PET and CT). This paper presents a brief review on these imaging techniques and their applications in plant phenotyping. The features used to apply these imaging techniques to plant phenotyping are described and discussed in this review.

  3. Imaging techniques for elements and element species in plant science.

    Science.gov (United States)

    Wu, Bei; Becker, J Sabine

    2012-05-01

    Revealing the uptake, transport, localization and speciation of both essential and toxic elements in plants is important for understanding plant homeostasis and metabolism, subsequently, providing information for food and nutrient studies, agriculture activities, as well as environmental research. In the last decade, emerging techniques for elemental imaging and speciation analysis allowed us to obtain increasing knowledge of elemental distribution and availabilities in plants. Chemical imaging techniques include mass spectrometric methods such as secondary ionization mass spectrometry (SIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and synchrotron-based techniques such as X-ray fluorescence spectroscopy (SRXRF), and so forth. On the other hand, X-ray absorption spectroscopy (XAS) based on synchrotron radiation is capable of in situ investigation of local atomic structure around the central element of interest. This technique can also be operated in tandem with SRXRF to image each element species of interest within plant tissue. In this review, the principles and state-of-the-art of these techniques regarding sample preparation, advantages and limitations, and improvement of sensitivity and spatial resolution are discussed. New results with respect to elemental distribution and speciation in plants revealed by these techniques are presented.

  4. Combined cycle power plant with circulating fluidized bed combustion. Final report; Kombikraftwerk mit zirkulierender Druckwirbelschicht-Feuerung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-05-01

    In the frame of this study the concept of a combined cycle power plant with circulating fluidized bed combustion was investigated for the application of national brown coal. The aims of this study which is subsidised by the FMTR are the following: - evaluation of the experiences which have been made so far in the frame of developing circulating fluidized bed combustion; - reaching of reliable statements about the process technology, about technical risks as well as about the time frame and the costs; - developing a task for a possible realisation of a 150 MW{sub el}-pilot plant in the new Laender. The present study shows that combined cycle power plants which are fuelled by brown coal can be realised according to the principle of circulating fluidized bed combustion with a plant net efficiency of 45% for a power of 150 MW{sub el} (pilot plant) and a plant net efficiency clearly above 47% for a power of 500 MW{sub el} (reference power plant). The combination of this efficient combined cycle power plant technology with a simple brown coal gasification module, that is integrated into a combustion reactor will almost certainly lead to plant net efficiencies of 50% and more, especially for ZDSWF plants of the second generation. (orig./GL) [Deutsch] Im Rahmen dieser Studie ist fuer den Einsatz einheimischer Braunkohle das Konzept eines Kombikraftwerkes auf der Basis der zirkulierenden Druckwirbelschichtfeuerung untersucht worden. Ziele dieser mit BMFT-Mitteln gefoerderten Studie sind: - die Bewertung der bisher im Rahmen der Entwicklung von Druckwirbelschichtfeuerungen gesammelten Erfahrungen, - die Gewinnung belastbarer Aussagen zum verfahrenstechnischen Konzept, zu technischen Risiken sowie zum Zeit- und Kostenrahmen sowie - die Ausarbeitung einer Aufgabenstellung fuer die moegliche Realisierung einer 150-MW{sub el}-Pilotanlage in den neuen Bundeslaendern. Die vorliegende Studie zeigt, dass mit Braunkohle befeuerte Kombikraftwerksanlagen nach dem Prinzip der

  5. Control techniques for invasive alien plants

    Directory of Open Access Journals (Sweden)

    Michele de Sá Dechoum

    2013-03-01

    Full Text Available Invasive alien species are recognized as a major threat to the conservation of biodiversity. These species should be managed based on local and regional environmental conditions. Control techniques were tested for ten invasive species in Santa Catarina State: the trees Casuarina equisetifolia, Hovenia dulcis, Psidium guajava, Syzygium cumini, and Terminalia catappa, and shrubs and herbs Rubus fruticosus, Furcraea foetida, Hedychium coronarium, Impatiens walleriana, and Tradescantia zebrina. Treatments applied for trees were cut stump, frill and girdling or ring-barking followed by herbicide application, while the other species were treated with foliar spray, application of herbicide on the root system, cut stump and herbicide injection. The active ingredients tested were Triclopyr, Glyphosate, and the combination of Triclopyr + Fluroxipyr in concentrations from 2 to 6%, according to the species. The cut stump method was efficient for all of the woody species, while ring-barking and frilling followed by herbicide application and basal bark application resulted in different levels of efficiency for the species tested. The most efficient method for herbs and shrubs was foliar spray, and the least efficient methods were cut stump and herbicide injection.

  6. Subsurface injection of combustion power plant effluent as a solid-phase carbon dioxide storage strategy

    Science.gov (United States)

    Darnell, K. N.; Flemings, P. B.; DiCarlo, D.

    2017-06-01

    Long-term geological storage of CO2 may be essential for greenhouse gas mitigation, so a number of storage strategies have been developed that utilize a variety of physical processes. Recent work shows that injection of combustion power plant effluent, a mixture of CO2 and N2, into CH4 hydrate-bearing reservoirs blends CO2 storage with simultaneous CH4 production where the CO2 is stored in hydrate, an immobile, solid compound. This strategy creates economic value from the CH4 production, reduces the preinjection complexity since costly CO2 distillation is circumvented, and limits leakage since hydrate is immobile. Here we explore the phase behavior of these types of injections and describe the individual roles of H2O, CO2, CH4, and N2 as these components partition into aqueous, vapor, hydrate, and liquid CO2 phases. Our results show that CO2 storage in subpermafrost or submarine hydrate-forming reservoirs requires coinjection of N2 to maintain two-phase flow and limit plugging.

  7. Neural network approach to the diagnosis of the boiler combustion in a coal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Munoz, A.; Villar, J.; Sanz-Bobi, M.A. [Universidad Pontificia Comillas, Madrid (Spain). Instituto de Investigacion Tecnologia

    1995-08-01

    In order to optimise boiler operation some sort of monitoring system is needed. Monitors can tell the operator about heat production and inputs to heat production; however they cannot monitor the process itself, only its effects. In this example the coal quality used varied, causing the amount of heat produced from the same fuel input to vary. Where quality is very poor the boiler may shutdown. To improve monitoring, flame visualisation techniques were used linked to an automatic diagnosis system. The system was based on artificial neural networks and mathematical techniques. It was installed in the Meirama power plant in Northwest Spain. 18 refs., 17 figs.

  8. Effective utilization of waste ash from MSW and coal co-combustion power plant: Zeolite synthesis.

    Science.gov (United States)

    Fan, Yun; Zhang, Fu-Shen; Zhu, Jianxin; Liu, Zhengang

    2008-05-01

    The solid by-product from power plant fueled with municipal solid waste and coal was used as a raw material to synthesize zeolite by fusion-hydrothermal process in order to effectively use this type of waste material. The effects of treatment conditions, including NaOH/ash ratio, operating temperature and hydrothermal reaction time, were investigated, and the product was applied to simulated wastewater treatment. The optimal conditions for zeolite X synthesis were: NaOH/ash ratio=1.2:1, fusion temperature=550 degrees C, crystallization time=6-10 h and crystallization temperature=90 degrees C. In the synthesis process, it was found that zeolite X tended to transform into zeolite HS when NaOH/ash ratio was 1.8 or higher, crystallization time was 14-18 h, operating temperature was 130 degrees C or higher. The CEC value, BET surface area and pore volume for the synthesized product at optimal conditions were 250 cmol kg(-1), 249 m(2) g(-1) and 0.46 cm(3) g(-1) respectively, higher than coal fly ash based zeolite. Furthermore, when applied to Zn(2+) contaminated wastewater treatment, the synthesized product presented larger adsorption capacity and bond energy than coal fly ash based zeolite, and the adsorption isotherm data could be well described by Langmuir and Freundlich isotherm models. These results demonstrated that the special type of co-combustion ash from power plant is suitable for synthesizing high quality zeolite, and the products are suitable for heavy metal removal from wastewater.

  9. Identification of hazards in non-nuclear power plants. [Public health hazards of fossil-fuel, combined cycle, combustion turbine, and geothermal power plants

    Energy Technology Data Exchange (ETDEWEB)

    Roman, W.S.; Israel, W.J.; Sacramo, R.F.

    1978-07-01

    Public health and safety hazards have been identified for five types of power plants: coal-fired, oil-fired steam turbine, combined cycle, combustion (gas) turbine, and geothermal. The results of the analysis show that air pollutants are the major hazard that affects the health and safety of the general public. A total of ninety plant hazards were identified for the five plant types. Each of these hazards were rated in six categories as to their affect on the general public. The criteria used in the analysis were: area/population exposed; duration; mitigation; quantity to toxicity ratio; nature of health effects; and public attitude. Even though ninety hazards were identified for the five plants analyzed, the large majority of hazards were similar for each plant. Highest ratings were given to the products of the combustion cycle or to hydrogen sulfide emissions from geothermal plants. Water pollution, cooling tower effects and noise received relatively low ratings. The highest rated of the infrequent or hypothetical hazards were those associated with potential fires, explosions, and chlorine releases at the plant. Hazards associated with major cooling water releases, water pollution and missiles received the lowest ratings. Since the results of the study clearly show that air pollutants are currently considered the most severe hazard, additional effort must be made to further understand the complex interactions of pollutants with man and his environment. Of particular importance is the determination of dose-response relationships for long term, low level exposure to air pollutants. (EDB)

  10. Application of Foam-gel Technique to Control CO Exposure Generated During Spontaneous Combustion of Coal in Coal Mines.

    Science.gov (United States)

    Ren, Xing W; Wang, Feng Z; Guo, Qing; Zuo, Zhao B; Fang, Qi S

    2015-01-01

    In China, 47.3% of state-owned coal mines are located in coal seams that are prone to spontaneous combustion. The spontaneous combustion of coal is the main cause of the generation of a large amount of carbon monoxide, which can cause serious health issues to miners. A new technique using foam-gel formation was developed to effectively control the spontaneous combustion of coal. The gel can capture more than 90% of the water in the grout and at the same time the foam can cover dangerous areas in the goaf by stacking and cooling of foam in all directions. In this study, a mechanism of foam-gel formation was introduced and the optimal proportions of additives were defined based on experiments of different foaming properties, gelling time and water loss rate as the main index parameters. The results of a field application in a coal mine promise that this new technique would effectively prevent coal oxidation in the goaf and reduce the generation of carbon monoxide.

  11. Nanocrystalline SrHfO{sub 3} synthesized through a single step auto-igniting combustion technique and its characterization

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, J.K., E-mail: jkthomasemrl@yahoo.co [Electronic Materials Research Laboratory, Department of Physics, Mar Ivanios College, Thiruvananthapuram, Kerala 695 015 (India); Padma Kumar, H. [Department of Physics, W.M.O Arts and Science College, Muttil, Wayanad, Kerala 673122 (India); Solomon, Sam [Department of Physics, St. Johns College, Anchal, Kollam, Kerala 691306 (India); Mathai, K.C.; Koshy, J. [Electronic Materials Research Laboratory, Department of Physics, Mar Ivanios College, Thiruvananthapuram, Kerala 695 015 (India)

    2010-10-22

    Research highlights: {yields} In the present paper, we are reporting the synthesis of nanocrystalline SrHfO{sub 3} in a single step combustion technique. {yields} The method offers an easy, economical way to the synthesis of nanostructured ceramic compounds. {yields} The powders obtained after combustion shows superior phase homogeneity, sinterability etc. - Abstract: Nanocrystalline strontium hafnate (SrHfO{sub 3}) was synthesized through auto-ignited combustion technique. The X-ray diffraction studies of SrHfO{sub 3} nanoparticles have shown that the as-prepared powder was single phase, crystalline, and has an orthorhombic (Pmna) perovskite structure (ABO{sub 3}). The phase purity of the powder was further examined using; thermo gravimetric analysis, differential thermal analysis, and Fourier transform infrared spectroscopy. The transmission electron microscopy study showed that the particle size of the as-prepared powder is in the range 20-60 nm with a mean size of 40 nm. The nanopowder could be sintered to 98% of the theoretical density at 1620 {sup o}C for 3 h. The microstructure of the sintered surface was examined using scanning electron microscopy. The dielectric constant ({epsilon}{sub r}) of 25.13 and loss factor (tan {delta}) of 5.3 x 10{sup -3} were obtained at 1 MHz.

  12. Research status of key techniques for shock-induced combustion ramjet(shcramjet) engine

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    As one of the most promising propulsion systems in the future,shock-induced combustion ramjet engine can remedy the disadvantages in the integrated design of scramjet engine and airframe.It can shorten the length of the combustor,lighten the structure weight of the engine and keep better performance in a broad range of flight Mach number.The elementary principle of shock-induced combustion ramjet engine is introduced.The key technologies of this kind of propulsion system are described,while their research status is presented in detail.Suggestion on the development of shcramjet engine in China is put forward.

  13. Tracer-based laser-induced fluorescence measurement technique for quantitative fuel/air-ratio measurements in a hydrogen internal combustion engine.

    Science.gov (United States)

    Blotevogel, Thomas; Hartmann, Matthias; Rottengruber, Hermann; Leipertz, Alfred

    2008-12-10

    A measurement technique for the quantitative investigation of mixture formation processes in hydrogen internal combustion engines (ICEs) has been developed using tracer-based laser-induced fluorescence (TLIF). This technique can be employed to fired and motored engine operation. The quantitative TLIF fuel/air-ratio results have been verified by means of linear Raman scattering measurements. Exemplary results of the simultaneous investigation of mixture formation and combustion obtained at an optical accessible hydrogen ICE are shown.

  14. High plant availability of phosphorus and low availability of cadmium in four biomass combustion ashes

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiaoxi, E-mail: Xiaoxi.Li@agro.au.dk; Rubæk, Gitte H.; Sørensen, Peter

    2016-07-01

    For biomass combustion to become a sustainable energy production system, it is crucial to minimise landfill of biomass ashes, to recycle the nutrients and to minimise the undesirable impact of hazardous substances in the ash. In order to test the plant availability of phosphorus (P) and cadmium (Cd) in four biomass ashes, we conducted two pot experiments on a P-depleted soil and one mini-plot field experiment on a soil with adequate P status. Test plants were spring barley and Italian ryegrass. Ash applications were compared to triple superphosphate (TSP) and a control without P application. Both TSP and ash significantly increased crop yields and P uptake on the P-depleted soil. In contrast, on the adequate-P soil, the barley yield showed little response to soil amendment, even at 300–500 kg P ha{sup −1} application, although the barley took up more P at higher applications. The apparent P use efficiency of the additive was 20% in ryegrass - much higher than that of barley for which P use efficiencies varied on the two soils. Generally, crop Cd concentrations were little affected by the increasing and high applications of ash, except for relatively high Cd concentrations in barley after applying 25 Mg ha{sup −1} straw ash. Contrarily, even modest increases in the TSP application markedly increased Cd uptake in plants. This might be explained by the low Cd solubility in the ash or by the reduced Cd availability due to the liming effect of ash. High concentrations of resin-extractable P (available P) in the ash-amended soil after harvest indicate that the ash may also contribute to P availability for the following crops. In conclusion, the biomass ashes in this study had P availability similar to the TSP fertiliser and did not contaminate the crop with Cd during the first year. - Highlights: • Effects of four biomass ashes vs. a P fertiliser (TSP) on two crops were studied. • Ashes increased crop yields with P availability similar to TSP on P-depleted soil

  15. Evaluation of effects of groundwater withdrawals at the proposed Allen combined-cycle combustion turbine plant, Shelby County, Tennessee

    Science.gov (United States)

    Haugh, Connor J.

    2016-08-10

    The Mississippi Embayment Regional Aquifer Study groundwater-flow model was used to simulate the potential effects of future groundwater withdrawals at the proposed Allen combined-cycle combustion turbine plant in Shelby County, Tennessee. The scenario used in the simulation consisted of a 30-year average withdrawal period followed by a 30-day maximum withdrawal period. Effects of withdrawals at the Allen plant site on the Mississippi embayment aquifer system were evaluated by comparing the difference in simulated water levels in the aquifers at the end of the 30-year average withdrawal period and at the end of the scenario to a base case without the Allen combined-cycle combustion turbine plant withdrawals. Simulated potentiometric surface declines in the Memphis aquifer at the Allen plant site were about 7 feet at the end of the 30-year average withdrawal period and 11 feet at the end of the scenario. The affected area of the Memphis aquifer at the Allen plant site as delineated by the 4-foot potentiometric surface-decline contour was 2,590 acres at the end of the 30-year average withdrawal period and 11,380 acres at the end of the scenario. Simulated declines in the underlying Fort Pillow aquifer and overlying shallow aquifer were both less than 1 foot at the end of the 30-year average withdrawal period and the end of the scenario.

  16. Stable isotope techniques in plant water sources:a review

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The stable hydrogen and oxygen isotopes widely exist in various kinds of natural water.Plants have to cope with various water sources:rainwater,soil water,groundwater,sea water,and mixtures.These are usually characterized by different isotopic signatures (18O/16O and D/H ratios).Because there are relative abundance variations in water,and plant roots do not discriminate against specific water isotopes during water uptake,hydrogen and oxygen stable isotope ratios of water within plants provide new information on water sources,interactions between plant species and water use patterns under natural conditions.At present,the measurement of δD,δ18O composition of various potential water sources and stem water has become significant means to identify plant water sources.Based on previous studies,this review highlights recent advances such as theory basis,methodology,as well as different spatial and temporal scales,and existed questions and prospects.Stable isotope techniques for estimating plant water sources have provided valuable tools for conducting basic and applied research.Future studies emphasize the modification of preparing methods,isotope technique combined with other measurements,and aerial organs of plant water source should be en-couraged.

  17. Technical-economic evaluation of O2/CO2 recycle combustion power plant based on life-cycle

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    In this study, a detailed technical-economic analysis on a O2/CO2 recycle combustion power plant (Oxy-combustion plant) retrofitted from the existing coal-fired plant (with a capacity of 2×300 MW) in China was carried out by using life cycle assessment (LCA) and life cycle cost (LCC) method. The CO2 emissions, investment cost, cost of electricity and CO2 avoidance cost within the life cycle were calculated respectively. The results showed that the CO2 emission avoidance rate of retrofitted Oxy-combustion plant in the life cycle was about 77.09% without taking account of the CO2 compression; the annual cost increased by 5.9% approximately, the net power decreased by 21.33%, the cost of electricity increased by 34.77%, and the CO2 avoidance cost was about 28.93 USD/t. Considering the compression process of CO2, the avoidance rate of CO2 emission was about 73.35% or so; the annual cost increased by 9.35% approximately, the net power decreased by about 26.70%, the cost of electricity increased by 49.13%, and the CO2 avoidance cost was about 45.46 USD/t. The carbon tax (the CO2 tax) should be more than about 24 USD/t and 34 USD/t under the condition of considering CO2 compression or not, respectively, which is beneficial to promote transformation of existing coal-fired plant for reducing the CO2 emissions.

  18. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Clifford Smith

    2003-09-01

    Application and testing of the new combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this 12th quarterly report. In this quarter, continued validation and testing of the combustion LES code was performed for the DOE-SimVal combustor. Also, beta testing by six consortium members was performed for various burner and combustor configurations. A list of suggested code improvements by the beta testers was itemized. Work will continue in FY04. A conditional modification to the contract will be granted. The additional work will focus on modeling/analyzing the SimVal experiments.

  19. Conventional Exergetic and Exergoeconomic Analyses of a Power Plant with Chemical Looping Combustion for CO2 Capture

    Directory of Open Access Journals (Sweden)

    Tatiana Morosuk

    2010-09-01

    Full Text Available

    Exergy-based methods can be used as a tool for examining, comparing and assessing thermodynamic systems. In this paper, an exergoeconomic analysis is used to evaluate a power plant with chemical looping combustion (CLC for CO2 capture. This oxy-fuel plant is compared, from an exergetic and an economic perspective, to a conventional, reference power plant without CO2 capture. The exergetic analysis shows decreased exergy destruction in the CLC reactors, compared to the exergy destruction in the conventional combustion chamber of the reference case; thus, the irreversibilities caused by combustion in the CLC are reduced. However, due to the addition of the CO2 compression unit, the overall exergetic efficiency of the plant with CLC is lower than that of the reference plant by approximately 5 percentage points. The economic analysis confirms a significant increase in the investment cost of the CO2 capture plant, due to the addition of the units for CO2 compression and CLC. Thus, the cost of electricity is 24% higher for this plant in comparison to that of the reference case. Nevertheless, when compared to the reference plant with CO2 capture with monoethanolamine, the plant with CLC was found to be a more economical option. Since CO2 abatement must be realized in the future, given expected environmental or tax measures, CLC provides relatively low cost carbon dioxide capture and it, therefore, appears to be a promising option for

  20. Characterization of feed coal and coal combustion products from power plants in Indiana and Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    Brownfield, M.E.; Affolter, R.H.; Cathcart, J.D.; O' Connor, J.T.; Brownfield, I.K.

    1999-07-01

    The US Geological Survey, Kentucky Geological Survey, and the University of Kentucky Center for Applied Energy Research are collaborating with Indiana and Kentucky utilities to determine the physical and chemical properties of feed coal and coal combustion products (CCP) from three coal-fired power plants. These three plants are designated as Units K1, K2, and I1 and burn high-, moderate-, and low-sulfur coals, respectively. Over 200 samples of feed coal and CCP were analyzed by various chemical and mineralogical methods to determine mode of occurrence and distribution of trace elements in the CCP. Generally, feed coals from all 3 Units contain mostly well-crystallized kaolinite and quartz. Comparatively, Unit K1 feed coals have higher amounts of carbonates, pyrite and sphalerite. Unit K2 feed coals contain higher kaolinite and illite/muscovite when compared to Unit K1 coals. Unit I1 feed coals contain beta-form quartz and alumino-phosphates with minor amounts of calcite, micas, anatase, and zircon when compared to K1 and K2 feed coals. Mineralogy of feed coals indicate that the coal sources for Units K1 and K2 are highly variable, with Unit K1 displaying the greatest mineralogic variability; Unit I1 feed coal however, displayed little mineralogic variation supporting a single source. Similarly, element contents of Units K1 and K2 feed coals show more variability than those of Unit I1. Fly ash samples from Units K1 and K2 consist mostly of glass, mullite, quartz, and spines group minerals. Minor amounts of illite/muscovite, sulfates, hematite, and corundum are also present. Spinel group minerals identified include magnetite, franklinite, magnesioferrite, trevorite, jacobisite, and zincochromite. Scanning Electron Microscope analysis reveals that most of the spinel minerals are dendritic intergrowths within aluminum silicate glass. Unit I1 fly ash samples contain glass, quartz, perovskite, lime, gehlenite, and apatite with minor amounts of periclase, anhydrite

  1. Mineral processing technologies used to obtain valuable components of the solid wastes from coal combustion in power plants

    Directory of Open Access Journals (Sweden)

    Martin Sisol

    2005-11-01

    Full Text Available This paper presents mineral processing technologies used to achieve components from solid wastes of coal combusted in power plants. By combusting bituminous coal in smelting boilers, mineral novelties are formed which are separable by suitable mineral processing technologies. The separation of unburned coal residues is realized by flotation, using nonionic flotation agents such as Flotalex MR, Flotalex bio, Flotakol NX and others. The Fe component created by the mineral novelty of magnetite is obtained by wet and dry low-intensity magnetic separation. Optimal results were accomplished by the flotation process in which we obtained residues of unburned coal. The waste from the flotation was consequently separated by the wet low-intensity separation. The waste from the flotation and magnetic separation - subtilized fly ash, contained 0 – 2,5% LOI which can be used in architecture.

  2. Combustion plants and the Water Framework Directive. Methodology for consequence assessment; Vaermeanlaeggningar och Vattendirektivet. Metodik foer konsekvensbedoemning

    Energy Technology Data Exchange (ETDEWEB)

    Rossander, Annelie; Andersson, Jonas; Axby, Fredrik; Schultz, Emma; Persson, Maarten; Svaerd, Sara [Carl Bro AB, Kristianstad (Sweden)

    2007-04-15

    The project can be regarded as a natural continuation to the Vaermeforsk project M4-324 by Axby and Hansson: 'Practical consequences of the Water Framework Directive implementation for combustion plants - New water cleaning technologies and methods for improvement of effluent discharges'. The six different combustion plants studied in this project have been chosen mainly on the basis of their varying size, fuel, cleaning equipment and recipient. The significance of water as a finite resource in the global ecosystems has been more pronounced recently. In the light of the growing stresses on the water resources the European Parliament accepted the Water Framework Directive in year 2000. The main purpose with the directive is to achieve and preserve a 'good water status', among other things through a long term protection of available water resources. Enclosure X of the Framework Directive contains a list of chemical substances where 33 'prioritized substances' and 'prioritized, dangerous substances' are specified. The objective of the list is to reduce the discharges of prioritized substances, and to fully eliminate the prioritized, dangerous substances both from industry and other contexts. Twelve of the substances mentioned on the prioritized list can or could be found in the water coming out from combustion plants. A predominant part of these substances are to be totally phased out in the foreseeable future according to the Water Directive. This can result in restrictions in the permissions to let out water from combustion plants to the surroundings. The substances concerned are the heavy metals lead, cadmium, mercury and nickel, both as pure substances and included in compounds, as well as a number of different polyaromatic hydrocarbons (PAH). The intent of the project has been to use an accepted computational model to create an analytic method (an ecotoxicological risk assessment), with the aim to meet the new requirements

  3. Combustion water purification techniques influence on OBT analysing using liquid scintillation counting method

    Energy Technology Data Exchange (ETDEWEB)

    Varlam, C.; Vagner, I.; Faurescu, I.; Faurescu, D. [National Institute for Cryogenics and Isotopic Technologies, Valcea (Romania)

    2015-03-15

    In order to determine organically bound tritium (OBT) from environmental samples, these must be converted into water, measurable by liquid scintillation counting (LSC). For this purpose we conducted some experiments to determine OBT level of a grass sample collected from an uncontaminated area. The studied grass sample was combusted in a Parr bomb. However usual interfering phenomena were identified: color or chemical quench, chemiluminescence, overlap over tritium spectrum because of other radionuclides presence as impurities ({sup 14}C from organically compounds, {sup 36}Cl as chloride and free chlorine, {sup 40}K as potassium cations) and emulsion separation. So the purification of the combustion water before scintillation counting appeared to be essential. 5 purification methods were tested: distillation with chemical treatment (Na{sub 2}O{sub 2} and KMnO{sub 4}), lyophilization, chemical treatment (Na{sub 2}O{sub 2} and KMnO{sub 4}) followed by lyophilization, azeotropic distillation with toluene and treatment with a volcanic tuff followed by lyophilization. After the purification step each sample was measured and the OBT measured concentration, together with physico-chemical analysis of the water analyzed, revealed that the most efficient method applied for purification of the combustion water was the method using chemical treatment followed by lyophilization.

  4. Calculational technique to predict combustible gas generation in sealed radioactive waste containers

    Energy Technology Data Exchange (ETDEWEB)

    Flaherty, J.E.; Fujita, A.; Deltete, C.P.; Quinn, G.J.

    1986-05-01

    Certain forms of nuclear waste, when subjected to ionizing radiation, produce combustible mixtures of gases. The production of these gases in sealed radioactive waste containers represents a significant safety concern for the handling, shipment and storage of waste. The US Nuclear Regulatory Commission (NRC) acted on this safety concern in September 1984 by publishing an information notice requiring waste generators to demonstrate, by tests or measurements, that combustible mixtures of gases are not present in radioactive waste shipments; otherwise the waste must be vented within 10 days of shipping. A task force, formed by the Edison Electric Institute to evaluate these NRC requirements, developed a calculational method to quantify hydrogen gas generation in sealed containers. This report presents the calculational method along with comparisons to actual measured hydrogen concentrations from EPICOR II liners, vented during their preparation for shipment. As a result of this, the NRC recently altered certain waste shipment Certificates-Of-Compliance to allow calculations, as well as tests and measurements, as acceptable means of determining combustible gas concentration. This modification was due in part to work described herein.

  5. Development of Plant Application Technique of Low Dose Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek (and others)

    2007-07-15

    The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources.

  6. Zinc Isotope Variability in Three Coal-Fired Power Plants: A Predictive Model for Determining Isotopic Fractionation during Combustion.

    Science.gov (United States)

    Ochoa Gonzalez, R; Weiss, D

    2015-10-20

    The zinc (Zn) isotope compositions of feed materials and combustion byproducts were investigated in three different coal-fired power plants, and the results were used to develop a generalized model that can account for Zn isotopic fractionation during coal combustion. The isotope signatures in the coal (δ(66)ZnIRMM) ranged between +0.73 and +1.18‰, values that fall well within those previously determined for peat (+0.6 ±2.0‰). We therefore propose that the speciation of Zn in peat determines the isotope fingerprint in coal. All of the bottom ashes collected in these power plants were isotopically depleted in the heavy isotopes relative to the coals, with δ(66)ZnIRMM values ranging between +0.26‰ and +0.64‰. This suggests that the heavy isotopes, possibly associated with the organic matter of the coal, may be preferentially released into the vapor phase. The fly ash in all of these power plants was, in contrast, enriched in the heavy isotopes relative to coal. The signatures in the fly ash can be accounted for using a simple unidirectional fractionation model with isotope fractionation factors (αsolid-vapor) ranging between 1.0003 and 1.0007, and we suggest that condensation is the controlling process. The model proposed allows, once the isotope composition of the feed coal is known, the constraining of the Zn signatures in the byproducts. This will now enable the integration of Zn isotopes as a quantitative tool for the source apportionment of this metal from coal combustion in the atmosphere.

  7. Development of a dynamic simulator for a natural gas combined cycle (NGCC) power plant with post-combustion carbon capture

    Energy Technology Data Exchange (ETDEWEB)

    Liese, E.; Zitney, S.

    2012-01-01

    The AVESTAR Center located at the U.S. Department of Energy’s National Energy Technology Laboratory and West Virginia University is a world-class research and training environment dedicated to using dynamic process simulation as a tool for advancing the safe, efficient and reliable operation of clean energy plants with CO{sub 2} capture. The AVESTAR Center was launched with a high-fidelity dynamic simulator for an Integrated Gasification Combined Cycle (IGCC) power plant with pre-combustion carbon capture. The IGCC dynamic simulator offers full-scope Operator Training Simulator (OTS) Human Machine Interface (HMI) graphics for realistic, real-time control room operation and is integrated with a 3D virtual Immersive Training Simulator (ITS), thus allowing joint control room and field operator training. The IGCC OTS/ITS solution combines a “gasification with CO{sub 2} capture” process simulator with a “combined cycle” power simulator into a single high-performance dynamic simulation framework. This presentation will describe progress on the development of a natural gas combined cycle (NGCC) dynamic simulator based on the syngas-fired combined cycle portion of AVESTAR’s IGCC dynamic simulator. The 574 MW gross NGCC power plant design consisting of two advanced F-class gas turbines, two heat recovery steam generators (HRSGs), and a steam turbine in a multi-shaft 2x2x1 configuration will be reviewed. Plans for integrating a post-combustion carbon capture system will also be discussed.

  8. Effects of catalyst precursors on carbon nanowires by using ethanol catalytic combustion technique

    Institute of Scientific and Technical Information of China (English)

    CHENG Jin; ZOU Xiao-ping; LI Fei; ZHANG Hong-dan; REN Peng-fei

    2006-01-01

    Iron nitrate,nickel nitrate and cobalt nitrate were used as catalyst precursors to study their effects on carbon nanowires synthesized by ethanol catalytic combustion (ECC) process. The as-grown carbon nanowires were characterized by means of scanning electron microscopy,transmission electron microscopy and Raman spectroscopy. The results show that relatively uniform nanowires will be formed when the catalyst precursor is iron nitrate:while helical structure or disordered structure will be formed when the catalyst precursor is nickel nitrate or cobalt nitrate.

  9. Further analysis of the effects of baffles on combustion instability. [computer techniques

    Science.gov (United States)

    Oberg, C. L.; Schuman, M. D.

    1975-01-01

    A computerized analytical model, developed to predict the effects of baffles on combustion instability, was modified in an effort to improve the ability to properly predict stability effects. The model was modified: (1) to replace a single spatially-averaged response factor by separate values for each baffle compartment; (2) to calculate the axial component of the acoustic energy flux, and (3) to permit analysis of traveling waves in a thin annular chamber. Allowance for separate average response factors in each baffle compartment was found to significantly affect the predicted results. With this modification, an optimum baffle length was predicted which gave maximum stability.

  10. Innovative Clean Coal Technology (ICCT): 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, First quarter 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. The project is being conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The primary goal of this project is the characterization of the low NO{sub x} combustion equipment through the collection and analysis of long-term emissions data. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NO{sub x} burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency.

  11. CFD analysis of the pulverized coal combustion processes in a 160 MWe tangentially-fired-boiler of a thermal power plant

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Cristiano V. da; Beskow, Arthur B. [Universidade Regional Integrada do Alto Uruguai e das Misses (LABSIM/GEAPI/URI), Erechim, RS (Brazil). Dept. de Engenharia e Ciencia da Computacao. Grupo de Engenharia Aplicada a Processos Industriais], Emails: cristiano@uricer.edu.br, Arthur@uricer.edu.br; Indrusiak, Maria Luiza S. [Universidade do Vale do Rio dos Sinos (UNISINOS), Sao Leopoldo, RS (Brazil). Programa de Engenharia Mecanica], E-mail: sperbindrusiak@via-rs.net

    2010-10-15

    The strategic role of energy and the current concern with greenhouse effects, energetic and exegetic efficiency of fossil fuel combustion greatly enhance the importance of the studies of complex physical and chemical processes occurring inside boilers of thermal power plants. The state of the art in computational fluid dynamics and the availability of commercial codes encourage numeric studies of the combustion processes. In the present work the commercial software CFX Ansys Europe Ltd. was used to study the combustion of coal in a 160 MWe commercial thermal power plant with the objective of simulating the operational conditions and identifying factors of inefficiency. The behavior of the flow of air and pulverized coal through the burners was analyzed, and the three-dimensional flue gas flow through the combustion chamber and heat exchangers was reproduced in the numeric simulation. (author)

  12. Integration between a demo size post-combustion CO2 capture and full size power plant: an integral approach on energy penalty for different process options

    NARCIS (Netherlands)

    Miguel Mercader, F. de; Magneschi, G.; Sanchez Fernandez, E.; Stienstra, G.J.; Goetheer, E.L.V.

    2012-01-01

    CO2 capture based on post-combustion capture has the potential to significantly reduce the CO2 emissions from coal-fired power plants. However, this capture process reduces considerably the energy efficiency of the power plant. To reduce this energy penalty, this paper studies different

  13. Solid residues from combustion plants. Pt. 1; Feste Rueckstaende aus Verbrennungsanlagen. T. 1

    Energy Technology Data Exchange (ETDEWEB)

    Reichenberger, H.P.; Quicker, P.; Mocker, M.; Faulstich, M. [ATZ Entwicklungszentrum, Sulzbach-Rosenberg (Germany); Gleis, M. [Umweltbundesamt, Dessau-Rosslau (Germany)

    2008-08-15

    The following publication deals with solid combustion residues, which results in Germany from the thermal treatment of municipal waste, coal, sewage sludge and biomass. The intention is, to give an overview about the current situation. The first part of the article shows the annual quantities of combustible substances thermal treated and which kind of residues and which quantities of residues are resulting from the thermal treatment. Furthermore the properties of different residues are observed and together compared. The second part describes the quantities of residues feeded to the relevant ways of recycling or disposal. References to orders and legislations are given. (orig.)

  14. Solid residues from combustion plants. Pt. 2; Feste Rueckstaende aus Verbrennungsanlagen. T. 2

    Energy Technology Data Exchange (ETDEWEB)

    Reichenberger, H.P.; Quicker, P.; Mocker, M.; Faulstich, M. [ATZ Entwicklungszentrum, Sulzbach-Rosenberg (Germany); Gleis, M. [Umweltbundesamt, Dessau-Rosslau (Germany)

    2008-09-15

    The following publication deals with solid combustion residues, which results in Germany from the thermal treatment of municipal waste, coal, sewage sludge and biomass. The intention is, to give an overview about the current situation. The first part of the article shows the annual quantities of combustible substances thermal treated and which kind of residues and which quantities of residues are resulting from the thermal treatment. Furthermore the properties of different residues are observed and together compared. The second part describes the quantities of residues feeded to the relevant ways of recycling or disposal. References to orders and legislations are given. (orig.)

  15. CFD analysis of the pulverized coal combustion processes in a 160 MWe tangentially-fired-boiler of a thermal power plant

    OpenAIRE

    Silva,Cristiano V. da; Indrusiak,Maria Luiza S; Beskow,Arthur B

    2010-01-01

    The strategic role of energy and the current concern with greenhouse effects, energetic and exergetic efficiency of fossil fuel combustion greatly enhance the importance of the studies of complex physical and chemical processes occurring inside boilers of thermalpower plants. The state of the art in computational fluid dynamics and the availability of commercial codes encourage numeric studies of the combustion processes. In the presentwork the commercial software CFX © Ansys Europe Ltd. was ...

  16. Virus Elimination from Ornamental Plants Using in vitro Culture Techniques

    Directory of Open Access Journals (Sweden)

    Snežana Milošević

    2012-01-01

    Full Text Available Viruses are responsible for numerous epidemics in different crops in all parts of the world.As a consequence of their presence great economic losses are being incurred. In addition tothe development of sensitive techniques for detection, identification and characterization ofviruses, substantial attention has also been paid to biotechnological methods for their eliminationfrom plants. In this review article, the following biotechnological in vitro culture techniquesfor virus elimination from ornamental plants are presented: meristem culture, thermotherapy,chemotherapy, cryotherapy or a combination of these methods. The plant species,as well as the type of virus determine the choice of a most suitable method. The state ofthe art in investigation of virus elimination from Impatiens sp. in Serbia is summarized.

  17. COGENERATION OPPORTUNITIES TO IMPROVE THE EFFICIENCY OF MICRO HEAT POWER PLANTS BASED ON AIR COOLED INTERNAL COMBUSTION ENGINES

    Directory of Open Access Journals (Sweden)

    P. A. Shchinnikov

    2017-01-01

    Full Text Available The possibilities of operation of electric generators based on internal combustion engines with air cooling under conditions of cogeneration, when, along with the electricity, heat release in different embodiments is provided. Such facilities are usually realized on the basis of gasoline internal combustion engines (i.e. gasoline is used as a fuel. They can be used in the household, by professional builders, geologists, the military and rescuers in the area of emergencies and in areas with a lack of infrastructure. The basis of the facility is the gasoline generator Hitachi-2400 with an air-cooled power of 2.4 kW. The basic methodology for the study of microthermal power plants based on an air-cooled internal combustion engine which is based on balance equations is presented. The facility operation ensures the measurement of all temperatures and expenses of operating environments for determining heat flow in accordance with the proposed methodology. The specifications of heat exchangers for utilizing the heat of exhaust flue gases are presented. The energy diagram illustrating the useful effect of the application of various heat exchangers are plotted. Cogeneration possibilities of the facility are provided, firstly, by the release of heat with the air that cools a cylinder of the internal combustion engine, and, secondly, by the release of heat of hot water heated by utilizing the heat of the leaving flue gases, and, thirdly, in the calculated version, by the release of heat with air that is sequentially heated due to the cooling of the cylinder head and then by utilizing the heat of exhaust gases. It is demonstrated that the fuel heat utilization factor can be increased from 0.22 to 0.50–0.60, depending on the adopted technical solutions.

  18. Working fluid selection for the Organic Rankine Cycle (ORC) exhaust heat recovery of an internal combustion engine power plant

    Science.gov (United States)

    Douvartzides, S.; Karmalis, I.

    2016-11-01

    Organic Rankine cycle technology is capable to efficiently convert low-grade heat into useful mechanical power. In the present investigation such a cycle is used for the recovery of heat from the exhaust gases of a four stroke V18 MAN 51/60DF internal combustion engine power plant operating with natural gas. Design is focused on the selection of the appropriate working fluid of the Rankine cycle in terms of thermodynamic, environmental and safety criteria. 37 candidate fluids have been considered and all Rankine cycles examined were subcritical. The thermodynamic analysis of all fluids has been comparatively undertaken and the effect of key operation conditions such as the evaporation pressure and the superheating temperature was taken into account. By appropriately selecting the working fluid and the Rankine cycle operation conditions the overall plant efficiency was improved by 5.52% and fuel consumption was reduced by 12.69%.

  19. Hyperspectral remote sensing techniques for early detection of plant diseases

    Science.gov (United States)

    Krezhova, Dora; Maneva, Svetla; Zdravev, Tomas

    Hyperspectral remote sensing is an emerging, multidisciplinary field with diverse applications in Earth observation. Nowadays spectral remote sensing techniques allow presymptomatic monitoring of changes in the physiological state of plants with high spectral resolution. Hyperspectral leaf reflectance and chlorophyll fluorescence proved to be highly suitable for identification of growth anomalies of cultural plants that result from the environmental changes and different stress factors. Hyperspectral technologies can find place in many scientific areas, as well as for monitoring of plants status and functioning to help in making timely management decisions. This research aimed to detect a presence of viral infection in young pepper plants (Capsicum annuum L.) caused by Cucumber Mosaic Virus (CMV) by using hyperspectral reflectance and fluorescence data and to assess the effect of some growth regulators on the development of the disease. In Bulgaria CMV is one of the widest spread pathogens, causing the biggest economical losses in crop vegetable production. Leaf spectral reflectance and fluorescence data were collected by a portable fibre-optics spectrometer in the spectral ranges 450÷850 nm and 600-900 nm. Greenhouse experiment with pepper plants of two cultivars, Sivria (sensitive to CMV) and Ostrion (resistant to CMV) were used. The plants were divided into six groups. The first group consisted of healthy (control) plants. At growth stage 4-6 expanded leaf, the second group was inoculated with CMV. The other four groups were treated with growth regulators: Spermine, MEIA (beta-monomethyl ester of itaconic acid), ВТН (benzo(1,2,3)thiadiazole-7-carbothioic acid-S-methyl ester) and Phytoxin. On the next day, the pepper plants of these four groups were inoculated with CMV. The viral concentrations in the plants were determined by the serological method DAS-ELISA. Statistical, first derivative and cluster analysis were applied and several vegetation indices were

  20. Electrical and thermal properties of 10 mol% Gd 3+ doped ceria electrolytes synthesized through citrate combustion technique

    Directory of Open Access Journals (Sweden)

    Ramalinga Viswanathan Mangalaraja

    2009-09-01

    Full Text Available Nanocrystalline ceria electrolyte doped with 10 mol% gadolinia [Ce0.9Gd0.1O1.95] was synthesized by citric acid combustion technique involving mixtures of cerium nitrate oxidizer (O and citric acid fuel (F taken in the ratio of O/F=1. The as combusted precursors produced crystalline ceria particles upon calcination performed at 700°C for 2h. Ceria pellets were made and sintered at temperatures 1200, 1400 and 1500°C with a dwell time of 2, 4 and 6 h. The sintered microstructures, electrical and thermal conductivities and thermal diffusivity properties were evaluated in addition to the powder properties such as crystalline structure, surface area, particle size and morphology. Sintered ceria samples had 99% theoretical density at 1500°C/6h. The sintered microstructures exhibit dense ceria grains with sizes 500 nm to one micron. The electrical conductivity versus temperature showed conductivity in the order of 10^(-2 and 10^(-1 S·cm-1 at 500 and 700°C, respectively. The ceria sintered at 1500°C has the maximum thermal conductivity of ~2.79 W·m-1K-1 at room temperature.

  1. Deposition of LaMO3 (M=Ni,Co,Cr,Al)-Oriented Films by Spray Combustion Flame Technique

    Science.gov (United States)

    Ichinose, Hiromichi; Shiwa, Yuzo; Nagano, Masamitsu

    1994-10-01

    LaMO3 (M=Ni,Co,Cr,Al) films were prepared on sintered alumina, sapphire (001) and MgO(100) at 500 900°C by spraying ultrasonically atomized aqueous solutions of nitrates into a combustion flame (spray combustion flame technique). LaNiO3 and LaCoO3 on MgO(100) crystallized in high-temperature phases (cubic) while LaCrO3 and LaAlO3 crystallized in room-temperature phases. LaMO3 (M=Ni,Co,Cr,Al) films on MgO(100) were highly oriented to (100), (100), (001) and (100), respectively, while the films on sintered alumina and sapphire were not. The electric resistivities of the dense LaMO3 (M=Ni,Co,Cr) films were as low as those of bulk ceramics. LaNiO3 film deposited on MgO above 700°C showed the lowest resistivity of about 6×10-6 Ω m. It was suggested that the reactivities of the constituent metal atoms with OH in the flame are associated with the preferred phase and the morphology of the films.

  2. Biomass co-combustion in the Elverlingsen power plant. Innovative combustion optimisation increases possibilities of adding meat and bone meal by 33%; Biomasse-Mitverbrennung im Kraftwerk Elverlingsen. Innovative Verbrennungsoptimierung ermoeglicht eine um 33% hoehere Tiermehlzugabe

    Energy Technology Data Exchange (ETDEWEB)

    Heesemann, Martin; Schoepp, Hans-Uwe [Mark E Aktiengesellschaft, Elverlingsen (Germany); Behmann, Matthias; Wendelberger, Klaus; Spaeth, Till [Siemens Energy, Karlsruhe (Germany); Meerbeck, Bernhard [Siemens Energy, Offenbach (Germany)

    2010-07-01

    The Siemens SPPA-P3000 Combustion Optimisation at Mark-E's Elverlingsen Power Plant is the first worldwide installation of a powerful laser measurement system in combination with an innovative hybrid closed-loop control. The new continuous optical measurements of temperature and concentrations with spatial resolution are the base for improving operation of the unit's complex slag tap firing. The optimisation system enhances combustion of the organic secondary fuel and reduces NOx-formation in the firing substantially. (orig.)

  3. Biofuels combustion.

    Science.gov (United States)

    Westbrook, Charles K

    2013-01-01

    This review describes major features of current research in renewable fuels derived from plants and from fatty acids. Recent and ongoing fundamental studies of biofuel molecular structure, oxidation reactions, and biofuel chemical properties are reviewed, in addition to combustion applications of biofuels in the major types of engines in which biofuels are used. Biofuels and their combustion are compared with combustion features of conventional petroleum-based fuels. Two main classes of biofuels are described, those consisting of small, primarily alcohol, fuels (particularly ethanol, n-butanol, and iso-pentanol) that are used primarily to replace or supplement gasoline and those derived from fatty acids and used primarily to replace or supplement conventional diesel fuels. Research efforts on so-called second- and third-generation biofuels are discussed briefly.

  4. Advances in plant proteomics-key techniques of proteome

    Institute of Scientific and Technical Information of China (English)

    Songlin RUAN; Huasheng MA; Shiheng WANG; Ya XIN; Lihua QIAN; Jianxing TONG; Jie WANG

    2008-01-01

    Following the completion of genome sequen-cing of model plants,such as rice (Oryza sativa L.) and Arabidopsis thaliana,the era of functional plant genomics has arrived which provides a solid basis for the develop-ment of plant proteomics.We review the background and concepts of proteomics,as well as the key techniques which include:(1) separation techniques such as 2-DE (two-dimensional electrophoresis),RP-HPLC (reverse phase high performance liquid chromatography) and SELDI (surface enhanced laser desorption/ionization) protein chip; (2) mass spectrometry such as MALDI-TOF-MS (matrix assisted laser desorption/ionization-time of flight- mass spectrometry) and ESI-MS/MS (elec-trospray ionization mass spectrometry/mass spectro-metry); (3) Peptide sequence tags; (4) databases related to proteomics; (5) quantitative proteome; (6) TAP (tandem affinity purification) and (7) yeast two-hybrid system.In addition,the challenges and prospects of pro-teomics are also discussed.

  5. Structural, magnetic and gas sensing properties of nanosized copper ferrite powder synthesized by sol gel combustion technique

    Science.gov (United States)

    Sumangala, T. P.; Mahender, C.; Barnabe, A.; Venkataramani, N.; Prasad, Shiva

    2016-11-01

    Stoichiometric nano sized copper ferrite particles were synthesized by sol gel combustion technique. They were then calcined at various temperatures ranging from 300-800 °C and were either furnace cooled or quenched in liquid nitrogen. A high magnetisation value of 48.2 emu/g signifying the cubic phase of copper ferrite, was obtained for sample quenched to liquid nitrogen temperature from 800 °C. The ethanol sensing response of the samples was studied and a maximum of 86% response was obtained for 500 ppm ethanol in the case of a furnace cooled sample calcined at 800 °C. The chemical sensing is seen to be correlated with the c/a ratio and is best in the case of tetragonal copper ferrite.

  6. Co-combustion of household waste in small-scale energy supply and waste disposal plants; Co-Verbrennung von Siedlungsabfaellen in Kleinanlagen zur dezentralen Energieversorgung und Abfallentsorgung

    Energy Technology Data Exchange (ETDEWEB)

    Schroeer, Ramona

    2012-07-01

    The studies described in this book demonstrate that the co-combustion of household waste in small-scale combustion plants constitutes an alternative disposal concept which facilitates the operation of decentralised waste disposal and heat supply systems. The basic idea of the concept is the co-combustion of different waste fractions in common household logwood heating systems. The experiments performed have shown that this is technically feasible using currently available technology without further modification and that these plants are capable of combusting various waste fractions at low emission levels. Several co-combustion systems were compared with basic oil, pellet and logwood heating systems in both economic and ecological respects. For this purpose cost-effectiveness calculations and a life cycle assessment were performed and brought together in an eco-efficiency analysis. The results show that the most cost-effective and eco-efficient solution is achieved when the co-combustion system is operated for high energy yield and simultaneous reduction of incombustible fractions.

  7. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Steven Cannon; Clifford Smith

    2003-04-01

    Application and testing of the new combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this 10th quarterly report. CFD Research Corporation has developed the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, validation and testing of the combustion LES code was performed for the DOE-Simval combustor. Also, Beta testing by consortium members was performed for various burner and combustor configurations. In the two quarters ahead, CFDRC will validate the code on the new DOE SimVal experiments. Experimental data from DOE should be available in June 2003, though LES calculations are currently being performed. This will ensure a truly predictive test of the software. CFDRC will also provide help to the consortium members on running their cases, and incorporate improvements to the software suggested by the beta testers. The beta testers will compare their predictions with experimental measurements and other numerical calculations. At the end of this project (October, 2003), a final released version of the software will be available for licensing to the general public.

  8. New EC Directive on the limitation of emissions from large combustion plants. Implications for German power plants; Neue EG-Richtlinie ueber nationale Emissionshoechstmengen. Folgerung fuer deutsche Kraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrand, M. [VDEW - e.V., Frankfurt am Main (Germany). Bereich Recht und Umwelt

    2002-03-25

    The Directive 2001/80/EC of the European Parliament and of the Council, on the limitation of emissions of certain pollutants into the air from large combustion plants uses a regulatory instrument for limiting emissions at the national levels of EU member states. This approach is completely new and the author of this article therefore expects problems to arise in the context of transfer of this EC Directive into national law. Another aspect discussed is the assessment of implications for the operating power plants in Germany. (orig./CB) [German] Mit der im Herbst 2001 durch das Europaeische Parlament und durch den Umweltministerrat verabschiedeten Richtlinie ueber nationale Emissionshoechstmengen wurde vom europaeischen Vorschriftengeber ein in Deutschland bislang systemfremdes Regelungsinstrument geschaffen, dessen Umsetzung in nationales Recht und dessen anlagenspezifische Konsequenzen - zumindest hierzulande -bislang noch reichlich unklar sind. (orig.)

  9. Economics of wastewater treatment in GTL plant using spray technique

    Directory of Open Access Journals (Sweden)

    G.C. Enyi, G.G. Nasr, M. Burby

    2013-01-01

    Full Text Available In a Gas-to-liquid (GTL plant, significant quantities of CO2 and reaction water are produced and various chemicals are used as intermediate treatment chemicals. The reaction water is contaminated by these chemicals which impair the pH and the related properties of the water. The pH has to be controlled in the effluent treatment unit before the water is re-used or released to the environment. The overall aim of this investigation is to create a novel technique to address the problem of waste water treatment in GTL plants which will assist in the reduction of greenhouse gas (CO2 emissions into the atmosphere. A laboratory-scale effluent neutralisation unit for pH control utilising gas injectors was designed and built. The unit used the CO2 produced as a by-product of GTL process as wastewater treatment chemical instead of the conventional Sulphuric acid. The quality of wastewater after treatment with CO2 met the standards set by the state regulatory agency. The economics of the new process shows a better payout period of 3.6 years for capital investment of $1,645 Million compared to 4.7 years for an existing plant layout with capital investment of $1,900 Million. The effects of increase in plant capacity showed a lower payback back of 2.8 years for plant capacity of 140,000 barrels/day (22258 m3/day, 3.6 years for 34,000 barrels/day and 6.0 years for 12,500 barrels/day (1987 m3/day plant capacity. The sensitivity analysis using crystal ball simulator with ‘Microsoft Excel’ shows that the annual revenue has the greatest effects on the NPV of the plant than the CAPEX and inflation rate. Apart from the environmental benefits the process generates by reducing CO2 emissions into the atmosphere, the study also concludes that the replacement of conventional Sulphuric acid (H2SO4 unit with CO2 improves the economics of the plant.

  10. Economics of wastewater treatment in GTL plant using spray technique

    Energy Technology Data Exchange (ETDEWEB)

    Enyi, G.C.; Nasr, G.G.; Burby, M. [University of Salford, Manchester, M5 4WT (United Kingdom)

    2013-07-01

    In a Gas-to-liquid (GTL) plant, significant quantities of CO2 and reaction water are produced and various chemicals are used as intermediate treatment chemicals. The reaction water is contaminated by these chemicals which impair the pH and the related properties of the water. The pH has to be controlled in the effluent treatment unit before the water is re-used or released to the environment. The overall aim of this investigation is to create a novel technique to address the problem of waste water treatment in GTL plants which will assist in the reduction of greenhouse gas (CO2) emissions into the atmosphere. A laboratory-scale effluent neutralisation unit for pH control utilising gas injectors was designed and built. The unit used the CO2 produced as a by-product of GTL process as wastewater treatment chemical instead of the conventional Sulphuric acid. The quality of wastewater after treatment with CO2 met the standards set by the state regulatory agency. The economics of the new process shows a better payout period of 3.6 years for capital investment of $1,645 Million compared to 4.7 years for an existing plant layout with capital investment of $1,900 Million. The effects of increase in plant capacity showed a lower payback back of 2.8 years for plant capacity of 140,000 barrels/day (22258 m3/day), 3.6 years for 34,000 barrels/day and 6.0 years for 12,500 barrels/day (1987 m3/day) plant capacity. The sensitivity analysis using crystal ball simulator with 'Microsoft Excel' shows that the annual revenue has the greatest effects on the NPV of the plant than the CAPEX and inflation rate. Apart from the environmental benefits the process generates by reducing CO2 emissions into the atmosphere, the study also concludes that the replacement of conventional Sulphuric acid (H2SO4) unit with CO2 improves the economics of the plant.

  11. Synthesis, structure and electromagnetic properties of Mn-Zn ferrite by sol-gel combustion technique

    Science.gov (United States)

    Wang, Wenjie; Zang, Chongguang; Jiao, Qingjie

    2014-01-01

    The electromagnetic absorbing behaviors of a thin coating fabricated by mixing Mn-Zn ferrite with epoxy resin (EP) were studied. The spinel ferrites Mn1-xZnxFe2O4 (x=0.2, 0.5 and 0.8) were synthesized with citrate acid as complex agent by sol-gel combustion method. The microstructure and surface morphology of Mn-Zn ferrite powders were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM). The complex permittivity and complex permeability of the fabricated ferrite/EP composites were investigated in terms of their contributions to the absorbing properties in the low frequency (10 MHz to 1 GHz). The microwave absorption of the prepared ferrite/EP composites could be tailored by matching the dielectric loss and magnetic loss and by controlling the doped metal ratio. The composites with the ferrite composition x=0.2 are found to show higher reflection loss compared with the composites with other compositions. It is proposed that the prepared composites can potentially be applied in electromagnetic microwave absorbing field.

  12. Partitioning of selected trace elements in coal combustion products from two coal-burning power plants in the United States

    Science.gov (United States)

    Swanson, Sharon M.; Engle, Mark A.; Ruppert, Leslie F.; Affolter, Ronald H.; Jones, Kevin B.

    2013-01-01

    Samples of feed coal (FC), bottom ash (BA), economizer fly ash (EFA), and fly ash (FA) were collected from power plants in the Central Appalachian basin and Colorado Plateau to determine the partitioning of As, Cr, Hg, Pb, and Se in coal combustion products (CCPs). The Appalachian plant burns a high-sulfur (about 3.9 wt.%) bituminous coal from the Upper Pennsylvanian Pittsburgh coal bed and operates with electrostatic precipitators (ESPs), with flue gas temperatures of about 163 °C in the ESPs. At this plant, As, Pb, Hg, and Se have the greatest median concentrations in FA samples, compared to BA and EFA. A mass balance (not including the FGD process) suggests that the following percentages of trace elements are captured in FA: As (48%), Cr (58%), Pb (54%), Se (20%), and Hg (2%). The relatively high temperatures of the flue gas in the ESPs and low amounts of unburned C in FA (0.5% loss-on-ignition for FA) may have led to the low amount of Hg captured in FA. The Colorado Plateau plant burns a blend of three low-S (about 0.74 wt.%) bituminous coals from the Upper Cretaceous Fruitland Formation and operates with fabric filters (FFs). Flue gas temperatures in the baghouses are about 104 °C. The elements As, Cr, Pb, Hg, and Se have the greatest median concentrations in the fine-grained fly ash product (FAP) produced by cyclone separators, compared to the other CCPs at this plant. The median concentration of Hg in FA (0.0983 ppm) at the Colorado Plateau plant is significantly higher than that for the Appalachian plant (0.0315 ppm); this higher concentration is related to the efficiency of FFs in Hg capture, the relatively low temperatures of flue gas in the baghouses (particularly in downstream compartments), and the amount of unburned C in FA (0.29% loss-on-ignition for FA).

  13. Comparison, limitations and uncertainty of wet chemistry techniques, loss on ignition and dry combustion in soil organic carbon analysis

    Science.gov (United States)

    Ćirić, Vladimir; Manojlović, Maja; Belić, Milivoj; Nešić, Ljiljana; Švarc-Gajić, Jaroslava; Sitaula, Bishal K.

    2014-05-01

    Soil organic carbon (SOC) has an important role in natural processes (carbon cycle, global climate change and plant growth), agriculture, soil protection and biodiversity. Determination of SOC is usually based on the oxidation of soil organic matter (SOM). Many methods are available, each with advantages and disadvantages in terms of accuracy, costs, convenience and repeatability. Therefore, it is necessary to make a comprehensive overview in order to select appropriate method with the purpose of accurate SOC determination. Most errors in SOC stocks assessment and SOC monitoring occur due to differences in analytical approaches and procedures. This can be a key factor in making incorrect conclusions. The purpose of this research was to compare methods for SOC determination and highlight the strengths and weaknesses of individual methods. The research was conducted on soil samples collected from different soil types and different land uses of temperate region. The concentration of SOC in every sample was determined by the following methods: Tyrin's method, Tyrin's method without addition of AgSO4, Kotzmann's method, loss on ignition (LOI) method, Walkley-Black method, dry combustion by CHN analyzer with pretreatment with HCl and subtraction of volumetrically determined soil inorganic carbon (SIC) from dry combustion by CHN analyzer without pretreatment. Each of the applied methods demonstrated specific limitations. The average SOC concentration determined by different methods ranged from 16.1-28.5 g kg-1. It has been established that different methods for the determination of total SOC recovered 76-157% of SOC compared to the reference dry combustion method by CHN analyzer. The correlation coefficients between applied methods ranged from 0.74-0.98. The Tyrin's method without addition of AgSO4 can be recommended as the most suitable method for the determination of SOC, with mandatory use of the correction factor 1.14. For the purpose of reducing the difference

  14. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO[sub x]) emissions from coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-25

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO[sub x]) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company's Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO[sub x] combustion technologies on NO[sub x] emissions and boiler performance. A target of achieving fifty percent NO[sub x] reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO[sub x] control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO[sub x] concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO[sub x] reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progress report presents the LNCFS Level I short-term data collected during this quarter. In addition, a comparison of all the long-term emissions data that have been collected to date is included.

  15. Innovative Clean Coal Technology (ICCT): 180 MW demonstration of advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Technical progress report, second quarter 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-25

    This quarterly report discusses the technical progress of a US Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) Project demonstrating advanced tangentially-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from a coal-fired boiler. The project is being conducted at Gulf Power Company`s Plant Lansing Smith Unit 2 located near Panama City, Florida. The primary objective of this demonstration is to determine the long-term effects of commercially available tangentially-fired low NO{sub x} combustion technologies on NO{sub x} emissions and boiler performance. A target of achieving fifty percent NO{sub x} reduction using combustion modifications has been established for the project. The stepwise approach that is being used to evaluate the NO{sub x} control technologies requires three plant outages to successively install the test instrumentation and the different levels of the low NO{sub x} concentric firing system (LNCFS). Following each outage, a series of four groups of tests are performed. These are (1) diagnostic, (2) performance, (3) long-term, and (4) verification. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. This technical progress report presents the LNCFS Level I short-term data collected during this quarter. In addition, a comparison of all the long-term emissions data that have been collected to date is included.

  16. Opportunities for Products of New Plant Breeding Techniques.

    Science.gov (United States)

    Schaart, Jan G; van de Wiel, Clemens C M; Lotz, Lambertus A P; Smulders, Marinus J M

    2016-05-01

    Various new plant breeding techniques (NPBT) have a similar aim, namely to produce improved crop varieties that are difficult to obtain through traditional breeding methods. Here, we review the opportunities for products created using NPBTs. We categorize products of these NPBTs into three product classes with a different degree of genetic modification. For each product class, recent examples are described to illustrate the potential for breeding new crops with improved traits. Finally, we touch upon the future applications of these methods, such as cisgenic potato genotypes in which specific combinations of Phytophthora infestans resistance genes have been stacked for use in durable cultivation, or the creation of new disease resistances by knocking out or removing S-genes using genome-editing techniques.

  17. Assessment of Solid Sorbent Systems for Post-Combustion Carbon Dioxide Capture at Coal-Fired Power Plants

    Science.gov (United States)

    Glier, Justin C.

    In an effort to lower future CO2 emissions, a wide range of technologies are being developed to scrub CO2 from the flue gases of fossil fuel-based electric power and industrial plants. This thesis models one of several early-stage post-combustion CO2 capture technologies, solid sorbent-based CO2 capture process, and presents performance and cost estimates of this system on pulverized coal power plants. The spreadsheet-based software package Microsoft Excel was used in conjunction with AspenPlus modelling results and the Integrated Environmental Control Model to develop performance and cost estimates for the solid sorbent-based CO2 capture technology. A reduced order model also was created to facilitate comparisons among multiple design scenarios. Assumptions about plant financing and utilization, as well as uncertainties in heat transfer and material design that affect heat exchanger and reactor design were found to produce a wide range of cost estimates for solid sorbent-based systems. With uncertainties included, costs for a supercritical power plant with solid sorbent-based CO2 capture ranged from 167 to 533 per megawatt hour for a first-of-a-kind installation (with all costs in constant 2011 US dollars) based on a 90% confidence interval. The median cost was 209/MWh. Post-combustion solid sorbent-based CO2 capture technology is then evaluated in terms of the potential cost for a mature system based on historic experience as technologies are improved with sequential iterations of the currently available system. The range costs for a supercritical power plant with solid sorbent-based CO2 capture was found to be 118 to 189 per megawatt hour with a nominal value of 163 per megawatt hour given the expected range of technological improvement in the capital and operating costs and efficiency of the power plant after 100 GW of cumulative worldwide experience. These results suggest that the solid sorbent-based system will not be competitive with currently available

  18. LES SOFTWARE FOR THE DESIGN OF LOW EMISSION COMBUSTION SYSTEMS FOR VISION 21 PLANTS

    Energy Technology Data Exchange (ETDEWEB)

    Steven Cannon; Baifang Zuo; Virgil Adumitroaie; Keith McDaniel; Clifford Smith

    2002-04-30

    Further development of a combustion Large Eddy Simulation (LES) code for the design of advanced gaseous combustion systems is described in this sixth quarterly report. CFD Research Corporation (CFDRC) is developing the LES module within the parallel, unstructured solver included in the commercial CFD-ACE+ software. In this quarter, in-situ adaptive tabulation (ISAT) for efficient chemical rate storage and retrieval was implemented and tested within the Linear Eddy Model (LEM). ISAT type 3 is being tested so that extrapolation can be performed and further improve the retrieval rate. Further testing of the LEM for subgrid chemistry was performed for parallel applications and for multi-step chemistry. Validation of the software on backstep and bluff-body reacting cases were performed. Initial calculations of the SimVal experiment at Georgia Tech using their LES code were performed. Georgia Tech continues the effort to parameterize the LEM over composition space so that a neural net can be used efficiently in the combustion LES code. A new and improved Artificial Neural Network (ANN), with log-transformed output, for the 1-step chemistry was implemented in CFDRC's LES code and gave reasonable results. This quarter, the 2nd consortium meeting was held at CFDRC. Next quarter, LES software development and testing will continue. Alpha testing of the code will continue to be performed on cases of interest to the industrial consortium. Optimization of subgrid models will be pursued, particularly with the ISAT approach. Also next quarter, the demonstration of the neural net approach, for multi-step chemical kinetics speed-up in CFD-ACE+, will be accomplished.

  19. The ``SILVA`` program; Le cycle du combustible (evolution des techniques d`enrichissement isotopique)

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, M.

    1996-12-31

    The ``SILVA`` process (Uranium Atomic Vapor Laser Isotopic Separation) is an innovating system of enriched uranium (electronuclear reactors fuel) production. Its great interest comes from its selectivity. The aim is to divide by a factor of three the costs of production compared with those of the current plants. The stakes of this research program, its principle, the main research axis, the material means and the future prospects beyond 1997 are given as well as its technical advancement state. (O.M.).

  20. Review: Circulation of Inorganic Elements in Combustion of Alternative Fuels in Cement Plants

    DEFF Research Database (Denmark)

    Cortada Mut, Maria del Mar; Nørskov, Linda Kaare; Jappe Frandsen, Flemming

    2015-01-01

    Cement production is an energy-intensive process, which traditionally has been dependent on fossil fuels. However, the use of alternative fuels, i.e., selected waste, biomass, and byproducts with recoverable calorific value, is constantly increasing. Combustion of these fuels is more challenging......, compared to fossil fuels, because of a lack of experience and different chemical and physical properties. When complete oxidation Of fuels in the calciner and main burner is not achieved, they burn in direct contact with the bed material of the rotary kiln, causing local reducing conditions and increasing...

  1. Comparison of woody pellets, straw pellets, and delayed harvest system herbaceous biomass (switchgrass and miscanthus): analysis of current combustion techniques determining the value of biomass

    NARCIS (Netherlands)

    Hui, Y.

    2011-01-01

    Since the energy consumption is growing fast, it is important to find alternative resources for the future generation energy supply. This study is going to compare the woody pellets, straw pellets and delayed harvest system biomass (switchgrass and miscanthus) from the combustion technique perspecti

  2. Mercury in Environmental and Biological Samples Using Online Combustion with Sequential Atomic Absorption and Fluorescence Measurements: A Direct Comparison of Two Fundamental Techniques in Spectrometry

    Science.gov (United States)

    Cizdziel, James V.

    2011-01-01

    In this laboratory experiment, students quantitatively determine the concentration of an element (mercury) in an environmental or biological sample while comparing and contrasting the fundamental techniques of atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS). A mercury analyzer based on sample combustion,…

  3. Mercury in Environmental and Biological Samples Using Online Combustion with Sequential Atomic Absorption and Fluorescence Measurements: A Direct Comparison of Two Fundamental Techniques in Spectrometry

    Science.gov (United States)

    Cizdziel, James V.

    2011-01-01

    In this laboratory experiment, students quantitatively determine the concentration of an element (mercury) in an environmental or biological sample while comparing and contrasting the fundamental techniques of atomic absorption spectrometry (AAS) and atomic fluorescence spectrometry (AFS). A mercury analyzer based on sample combustion,…

  4. Comparison of woody pellets, straw pellets, and delayed harvest system herbaceous biomass (switchgrass and miscanthus): analysis of current combustion techniques determining the value of biomass

    NARCIS (Netherlands)

    Hui, Y.

    2011-01-01

    Since the energy consumption is growing fast, it is important to find alternative resources for the future generation energy supply. This study is going to compare the woody pellets, straw pellets and delayed harvest system biomass (switchgrass and miscanthus) from the combustion technique

  5. Combustion testing and heat recovery study: Frank E. Van Lare Wastewater Treatment Plant, Monroe County. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    The objectives of the study were to record and analyze sludge management operations data and sludge incinerator combustion data; ascertain instrumentation and control needs; calculate heat balances for the incineration system; and determine the feasibility of different waste-heat recovery technologies for the Frank E. Van Lare (FEV) Wastewater Treatment Plant. As an integral part of this study, current and pending federal and state regulations were evaluated to establish their impact on furnace operation and subsequent heat recovery. Of significance is the effect of the recently promulgated Federal 40 CFR Part 503 regulations on the FEV facility. Part 503 regulations were signed into law in November 1992, and, with some exceptions, affected facilities must be in compliance by February 19, 1994. Those facilities requiring modifications or upgrades to their incineration or air pollution control equipment to meet Part 503 regulations must be in compliance by February 19, 1995.

  6. A pilot-plant study for destruction of PCBs in contaminated soils using fluidized bed combustion technology.

    Science.gov (United States)

    Desai, Dilip L; Anthony, Edward J; Wang, Jinsheng

    2007-08-01

    Destruction of polychlorinated biphenyls (PCBs) in contaminated soils and wastes using circulating fluidized bed combustion (CFBC) technology was studied using a pilot plant and simulated waste material. The results show that the technology is effective and particularly promising for treatment of PCB-containing materials like the toxic sludge from a large contaminated site. Destruction of the toxics in the gas phase appears to be very fast, and over 99.9999% destruction and removal efficiency can be achieved in the temperature range 875-880 degrees C. Heat transfer in the fluidized bed also appears adequate. Toxic residues in treated soil can be reduced to very low levels. Rate-controlling factors of the decontamination process are analyzed, and key issues for determination of the process conditions are discussed.

  7. Design of a gas turbine combustion system for an ABGC plant

    Energy Technology Data Exchange (ETDEWEB)

    Kelsall, G.J.; Whinfrey, J.; Armstrong, S.J. [European Gas Turbines Limited (United Kingdom)

    1998-06-01

    Advanced coal based power generation systems such as the Air Blown Gasification Cycle (ABGC) offer the potential for high efficiency electricity generation with low environmental impact. An important component of the ABGC development programme is the design of a gas turbine combustion system to burn the coal-derived low calorific value (LCV) fuel-gas. The overall objective of this project was to provide a detailed bill of materials for the gas turbine combustion system forming part of the ABGC. The approach adopted was to minimise the required change to existing turbine components. High-confidence feasibility design concepts were provided for both the air offtake and fuel-gas manifolds to achieve acceptable air and fuel distributions. These distributions were {+-} 0.8% for the air offtake from four existing ports on the turbine casing and + 1.3% to -0.7% for the fuel distribution to the ten combustor fuel injectors. A second prototype (Prototype-2) combustor performed well during experimental testing using a purpose-built facility at European Gas Turbines (EGT`s) Whetstone site. Firing of a simulated fuel-gas achieved high performance levels. Low emission levels of CO and NO{sub x} were achieved. 9 refs., 3 figs. 6 tabs.

  8. A simple aloe vera plant-extracted microwave and conventional combustion synthesis: Morphological, optical, magnetic and catalytic properties of CoFe2O4 nanostructures

    Science.gov (United States)

    Manikandan, A.; Sridhar, R.; Arul Antony, S.; Ramakrishna, Seeram

    2014-11-01

    Nanocrystalline magnetic spinel CoFe2O4 was synthesized by a simple microwave combustion method (MCM) using ferric nitrate, cobalt nitrate and Aloe vera plant extracted solution. For the comparative study, it was also prepared by a conventional combustion method (CCM). Powder X-ray diffraction, energy dispersive X-ray and selected-area electron diffraction results indicate that the as-synthesized samples have only single-phase spinel structure with high crystallinity and without the presence of other phase impurities. The crystal structure and morphology of the powders were revealed by high resolution scanning electron microscopy and transmission electron microscopy, show that the MCM products of CoFe2O4 samples contain sphere-like nanoparticles (SNPs), whereas the CCM method of samples consist of flake-like nanoplatelets (FNPs). The band gap of the samples was determined by UV-Visible diffuse reflectance and photoluminescence spectroscopy. The magnetization (Ms) results showed a ferromagnetic behavior of the CoFe2O4 nanostructures. The Ms value of CoFe2O4-SNPs is higher i.e. 77.62 emu/g than CoFe2O4-FNPs (25.46 emu/g). The higher Ms value of the sample suggest that the MCM technique is suitable for preparing high quality nanostructures for magnetic applications. Both the samples were successfully tested as catalysts for the conversion of benzyl alcohol. The resulting spinel ferrites were highly selective for the oxidation of benzyl alcohol and exhibit important difference among their activities. It was found that CoFe2O4-SNPs catalyst show the best performance, whereby 99.5% selectivity of benzaldehyde was achieved at close to 93.2% conversion.

  9. Renew, reduce or become more efficient? The climate contribution of biomass co-combustion in a coal-fired power plant

    NARCIS (Netherlands)

    Miedema, Jan H.; Benders, Rene M. J.; Moll, Henri C.; Pierie, Frank

    2017-01-01

    Within this paper, biomass supply chains, with different shares of biomass co-combustion in coal fired power plants, are analysed on energy efficiency, energy consumption, renewable energy production, and greenhouse gas (GHG) emissions and compared with the performance of a 100% coal supply chain

  10. Effect of number concentration of soot and H2SO4 on aerosol based emissions from a post combustion capture plant

    NARCIS (Netherlands)

    Khakharia, P.M.; Brachert, L.; Schaber, K.; Huizinga, A.; Vlugt, T.; Mertens, J.; Schallert, B.; Goetheer, E.L.V.

    2013-01-01

    It is known that the use of volatile solvents for a post combustion capture process can lead to emission of the solvent due to their high vapour pressure. More recently, the issue of emission due to the formation of aerosols has been observed at different pilot plants. Therefore, it is of high impor

  11. Renew, reduce or become more efficient? The climate contribution of biomass co-combustion in a coal-fired power plant

    NARCIS (Netherlands)

    Miedema, Jan H.; Benders, Rene M. J.; Moll, Henri C.; Pierie, Frank

    2017-01-01

    Within this paper, biomass supply chains, with different shares of biomass co-combustion in coal fired power plants, are analysed on energy efficiency, energy consumption, renewable energy production, and greenhouse gas (GHG) emissions and compared with the performance of a 100% coal supply chain sc

  12. Comparative study of cogasification and co-combustion of communal sewage sludge in brown coal fuelled plants; Vergleich der Mitvergasung und Mitverbrennung kommunaler Klaerschlaemme in braunkohlegefeuerten Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Schiffer, H.P.; Bierbaum, K.; Adlhoch, W.; Thomas, G. [Rheinbraun AG, Koeln (Germany)

    1996-12-31

    Co-combustion and cogasification of sewage sludge in brown coal fuelled plants are compared, and an economic assessment is made. (ABI) [Deutsch] Die Mitverbrennung und Mitvergasung von Klaerschlamm in braunkohlegefeuerten Anlagen werden verglichen und auf ihre Wirtschaftlichkeit hin untersucht. (ABI)

  13. Emissions to the Atmosphere from Amine-Based Post Combustion CO2 Capture Plant – Regulatory Aspects

    Directory of Open Access Journals (Sweden)

    Azzi Merched

    2014-09-01

    Full Text Available Amine-based Post Combustion Capture (PCC of CO2 is a readily available technology that can be deployed to reduce CO2 emissions from coal fired power plants. However, PCC plants will likely release small quantities of amine and amine degradation products to the atmosphere along with the treated flue gas. The possible environmental effects of these emissions have been examined through different studies carried out around the world. Based on flue gas from a 400 MW ultra-supercritical coal fired power plant Aspen-Plus PCC process simulations were used to predict the potential atmospheric emissions from the plant. Different research initiatives carried out in this area have produced new knowledge that has significantly reduced the risk perception for the release of amine and amine degradation products to the atmosphere. In addition to the reduction of the CO2 emissions, the PCC technology will also help in reducing SOx and NO2 emissions. However, some other pollutants such as NH3 and aerosols will increase if appropriate control technologies are not adopted. To study the atmospheric photo-oxidation of amines, attempts are being made to develop chemical reaction schemes that can be used for air quality assessment. However, more research is still required in this area to estimate the reactivity of amino solvents in the presence of other pollutants such as NOx and other volatile organic compounds in the background air. Current air quality guidelines may need to be updated to include limits for the additional pollutants such as NH3, nitrosamines and nitramines once more information related to their emissions is available. This paper focuses on describing the predicted concentrations of major pollutants that are expected to be released from a coal fired power plant obtained by ASPEN-Plus PCC process simulations in terms of current air quality regulations and other regulatory aspects.

  14. Technical notes for the conceptual design for an atmospheric fluidized-bed direct combustion power generating plant. [570 MWe plant

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    The design, arrangement, thermodynamics, and economics of a 592 MW(e) (nominal gross) electric power generating plant equipped with a Babcock and Wilcox Company (B and W) atmospheric fluidized bed (AFB) boiler are described. Information is included on capital and operating costs, process systems, electrical systems, control and instrumentation, and environmental systems. This document represents a portion of an overall report describing the conceptual designs of two atmospheric fluidized bed boilers and balance of plants for the generation of electric power and the analysis and comparison of these conceptual designs to a conventional pulverized coal-fired electric power generation plant equipped with a wet limestone flue gas desulfurization system.

  15. Technical notes for the conceptual design for an atmospheric fluidized-bed direct combustion power generating plant. [570 MWe plant

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    The design, arrangement, thermodynamics, and economics of a 578 MW(e) (nominal gross) electric power generating plant equipped with a Foster Wheeler Energy Corporation (FWEC) atmospheric fluidized bed (AFB) boiler are described. Information is included on capital and operating costs, process systems, electrical systems, control and instrumentation, and environmental systems. This document represents a portion of an overall report describing the conceptual designs of two atmospheric fluidized bed boilers and balance of plants for the generation of electric power and the analysis and comparison of these conceptual designs to a conventional pulverized coal-fired electric power generation plant equipped with a wet limestone flue gas desulfurization system.

  16. Computational fluid dynamics (CFD) analysis of the coal combustion in a boiler of a thermal power plant using different kinds of the manufactured coals

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Cristiano Vitorino da; Lazzari, Luis Carlos; Ziemniczak, Aline; Beskow, Arthur Bortolin [Universidade Regional Integrada do Alto Uruguai e das Missoes (URI), Erechim, RS (Brazil)], E-mails: cristiano@uricer.edu.br, arthur@uricer.edu.br

    2010-07-01

    The state of the art in computational fluid dynamics and the availability of commercial codes encourage numerical studies of combustion processes. In the present work the commercial software CFX Ansys Europe Ltd. has been used to study the combustion of pulverized coal into the boiler of a thermal power plant. The objective of this work is to obtain new information for process optimization. Different kinds of manufactured coals were numerically tested in a thermal power plant installed at the southeast region of Brazil. The simulations were made using the actual burning conditions of the boiler. Results include the residence time of the fuel into the combustion chamber, temperature fields, flow fluid mechanics, heat transfer and pollutant formation, as well as the CO and NOx concentrations, aiming to determinate the best conditions to burn the investigated coals. The numerical investigation of the phenomena involved on the coal combustion processes are used to complete the experimental information obtained in operational tests. Considering the characteristics of different kinds of manufactured coals used, with this study is possible to achieve the most efficient boiler operation parameters, with decreasing costs of electricity production and reduction of environmentally harmful emissions. It was verified that the different kinds of manufactured coals demand different operation conditions, and the kind of manufactured coal used on the combustion process has a significant effect on the pollutant formation, mainly in rel action with ash concentration. (author)

  17. Report: New reliable method for the measurement of chlorine in refuse-derived fuels through combustion experiments in a pilot plant.

    Science.gov (United States)

    Schröer, Ramona; Urban, A I

    2010-02-01

    The calorific values and the chlorine contents of refuse-derived fuels were measured in the pilot combustion plant (PCP) by means of combustion experiments followed by mass and energy balancing. This plant reaches an increased precision by measuring the integrated values throughout the whole experimental period of three hours, based on a fuel capacity of 10 kg per test, allowing a more reliable measurement of pollutants than for experimental analysis of only a few grams of the sample. The combustion experiments are shown for the verification of the quality of the chlorine balancing in the PCP. The test evaluation was carried out by balancing the inputs and outputs of chlorine in the mass streams, and the recovery rates for chlorine were determined. An emission pattern for the chlorine is described by the transfer coefficients and via the temporal fluctuation of the hydrogen chloride concentration in the flue gas. The results of the combustion experiments prove that the balancing via combustion experiments in the PCP provides reliable data on the chlorine concentrations in the fuels, and is a new and reliable method for measuring polluting chlorine in refuse-derived fuels.

  18. Advanced power plant concepts based on CFB combustion and combined cycles

    Energy Technology Data Exchange (ETDEWEB)

    Plass, L.; Beisswenger, H.; Anders, R. (Lurgi GmbH, Frankfurt am Main (Germany, F.R.). Coal and Energy Division)

    1990-01-01

    The paper describes several power plants employing circulating fluidized bed (CFB) technology. The Moabit power plant of BEWAG (Berliner Kraft und Licht Aktiengesellschaft) supplies electric power and steam for district heating. The Charbonnages de France group has built a 367 t/h CFB boiler with reheat at the Emile Huchet power station in Carling, Lorraine France. This uses dry fuel but operation with slurry feed is scheduled soon. The 150 MWe CFB boiler operated by Texas New Mexico Power Company is the largest CFB boiler worldwide. Salient features of boiler design for these plants are discussed. All meet requirements for low SO{sub 2} and NO{sub x} and particulate emission but have been developed to the full. Improved efficiency and low emission levels can be met by combined cycle power plants employing coal gasification. Demonstration plants for example using the BGL-fixed bed gasifier are mentioned. 1 ref., 13 figs., 7 tabs.

  19. Analysis of thermally coupled chemical looping combustion-based power plants with carbon capture

    KAUST Repository

    Iloeje, Chukwunwike

    2015-04-01

    © 2015 Elsevier Ltd. A number of CO2 capture-enabled power generation technologies have been proposed to address the negative environmental impact of CO2 emission. One important barrier to adopting these technologies is the associated energy penalty. Chemical-looping Combustion (CLC) is an oxy-combustion technology that can significantly lower this penalty. It utilizes an oxygen carrier to transfer oxygen from air/oxidizing stream in an oxidation reactor to the fuel in a reduction reactor. Conventional CLC reactor designs employ two separate reactors, with metal/metal oxide particles circulating pneumatically in-between. One of the key limitations of these designs is the entropy generation due to reactor temperature difference, which lowers the cycle efficiency. Zhao et al. (Zhao et al., 2014; Zhao and Ghoniem, 2014) proposed a new CLC rotary reactor design, which overcomes this limitation. This reactor consists of a single rotating wheel with micro-channels designed to maintain thermal equilibrium between the fuel and air sides. This study uses three thermodynamic models of increasing fidelity to demonstrate that the internal thermal coupling in the rotary CLC reactor creates the potential for improved cycle efficiency. A theoretical availability model and an ideal thermodynamic cycle model are used to define the efficiency limits of CLC systems, illustrate the impact of reactor thermal coupling and discuss relevant criteria. An Aspen Plus® model of a regenerative CLC cycle is then used to show that this thermal coupling raises the cycle efficiency by up to 2% points. A parametric study shows that efficiency varies inversely with pressure, with a maximum of 51% at 3bar, 1000C and 60% at 4bar, 1400C. The efficiency increases with CO2 fraction at high pressure ratios but exhibits a slight inverse dependence at low pressure ratios. The parametric study shows that for low purge steam demand, steam generation improves exhaust heat recovery and increases efficiency

  20. Investment, regulation, and uncertainty: managing new plant breeding techniques.

    Science.gov (United States)

    Smyth, Stuart J; McDonald, Jillian; Falck-Zepeda, Jose

    2014-01-01

    As with any technological innovation, time refines the technology, improving upon the original version of the innovative product. The initial GM crops had single traits for either herbicide tolerance or insect resistance. Current varieties have both of these traits stacked together and in many cases other abiotic and biotic traits have also been stacked. This innovation requires investment. While this is relatively straight forward, certain conditions need to exist such that investments can be facilitated. The principle requirement for investment is that regulatory frameworks render consistent and timely decisions. If the certainty of regulatory outcomes weakens, the potential for changes in investment patterns increases.   This article provides a summary background to the leading plant breeding technologies that are either currently being used to develop new crop varieties or are in the pipeline to be applied to plant breeding within the next few years. Challenges for existing regulatory systems are highlighted. Utilizing an option value approach from investment literature, an assessment of uncertainty regarding the regulatory approval for these varying techniques is undertaken. This research highlights which technology development options have the greatest degree of uncertainty and hence, which ones might be expected to see an investment decline.

  1. Seismic margin analysis technique for nuclear power plant structures

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jeong Moon; Choi, In Kil

    2001-04-01

    In general, the Seismic Probabilistic Risk Assessment (SPRA) and the Seismic Margin Assessment(SAM) are used for the evaluation of realistic seismic capacity of nuclear power plant structures. Seismic PRA is a systematic process to evaluate the seismic safety of nuclear power plant. In our country, SPRA has been used to perform the probabilistic safety assessment for the earthquake event. SMA is a simple and cost effective manner to quantify the seismic margin of individual structural elements. This study was performed to improve the reliability of SMA results and to confirm the assessment procedure. To achieve this goal, review for the current status of the techniques and procedures was performed. Two methodologies, CDFM (Conservative Deterministic Failure Margin) sponsored by NRC and FA (Fragility Analysis) sponsored by EPRI, were developed for the seismic margin review of NPP structures. FA method was originally developed for Seismic PRA. CDFM approach is more amenable to use by experienced design engineers including utility staff design engineers. In this study, detailed review on the procedures of CDFM and FA methodology was performed.

  2. Effect on Particulate and Gas Emissions by Combusting Biodiesel Blend Fuels Made from Different Plant Oil Feedstocks in a Liquid Fuel Burner

    OpenAIRE

    Norwazan Abdul Rahim; Mohammad Nazri Mohd Jaafar; Syazwan Sapee; Hazir Farouk Elraheem

    2016-01-01

    This paper focuses on the combustion performance of various blends of biodiesel fuels and diesel fuel from lean to rich mixtures. The biodiesel blend fuel combustion experiments were carried out using a liquid fuel burner and biodiesel fuel made from various plant oil feedstocks, including jatropha, palm and coconut oils. The results show that jatropha oil methyl ester blend 25 (JOME B25) and coconut oil methyl ester blend 25 (COME B25) blended at 25% by volume in diesel fuel produced lower c...

  3. Co-combustion of gasified contaminated waste wood in a coal fired power plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This project demonstrates the technical and economical feasibility of the producing and cofiring of product gas from demolition waste wood. For this purpose LCV product gas is generated in an atmospheric circulating fluidized bed (CFB) gasification plant, cooled and cleaned and transported to the boiler of a 600 MWe pulverized coal fired power plant. Gas cooling and cleaning takes place in a waste heat boiler and a multi stage wet gas cleaning train. Steam raised in the waste heat boiler is exported to the power plant. On an annual basis 70,000 tons of steam coal are substituted by 150,000 tons of contaminated demolition waste wood (50,000 tons oil equivalent), resulting in a net CO2 emission reduction of 170,000 tons per year, while concurrently generating 205 GWh of electrical power. The wood gasification plant was built by NV EPZ (now incorporated in Essent Energi BV) for Amergas BV, now a 100% subsidiary of Essent Energie BV. The gasification plant is located at the Amer Power Station of NV EPZ Production (now Essent Generation) at Geertruidenberg, The Netherlands. Demonstrating several important design features in wood gasification, the plant started hot service in the Spring of 2000, with first gasification accomplished in the Summer of 2000 and is currently being optimized. (au)

  4. Availability assessment and risk assessment regarding handling and preparation of biomass in combustion plants; Tillgaenglighets- och riskbedoemning av system foer hantering och beredning av biobraensle i foerbraenningsanlaeggningar

    Energy Technology Data Exchange (ETDEWEB)

    Biguen, Helen; Bodlund, Gunnar; Dahlloef, Lars; Pettersson, Lars [SwedPower, Stockholm (Sweden)

    2005-04-01

    or explosion as well as critical functions are identified with FMEA technique. At the same time fault frequency and fault probability for the events included in fault tree are estimated. The events are for example presence of combustible material, ignition source, functioning fire sprinklers. The fault trees are modeled in a commercially accessible calculation program. The evaluation shows that the frequency for 'fire or explosion' is about 3 times/year. A study was done to evaluate the parameters that can contribute to reduce risk from other risk mitigating functions. Our conclusion is that both the systematic availability analyses and the probabilistic risk analyses have potential, correct applied, to be the tools to support decisions in a planning phase. Both during design of new plant or refurbishment of old plants. At the same time analysis shows that simplified analysis with rough but relevant input give significant answers to the questions. The models of analyses prepared during a project period should be alive during the continuous operation. Faults and disturbances in the plant should be continuously analysed and thus influence availability and fault data for individual components and functions. This might be done when working orders are reported, without increasing the burden of paper work on the operating organization. The support for decision given by the analyses is valuable when refurbish proposals are evaluated and may give answers to the question if the plant fulfill future legislation and regulations.

  5. Innovative clean coal technology: 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. Final report, Phases 1 - 3B

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This report presents the results of a U.S. Department of Energy (DOE) Innovative Clean Coal Technology (ICCT) project demonstrating advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. The project was conducted at Georgia Power Company`s Plant Hammond Unit 4 located near Rome, Georgia. The technologies demonstrated at this site include Foster Wheeler Energy Corporation`s advanced overfire air system and Controlled Flow/Split Flame low NOx burner. The primary objective of the demonstration at Hammond Unit 4 was to determine the long-term effects of commercially available wall-fired low NOx combustion technologies on NOx emissions and boiler performance. Short-term tests of each technology were also performed to provide engineering information about emissions and performance trends. A target of achieving fifty percent NOx reduction using combustion modifications was established for the project. Short-term and long-term baseline testing was conducted in an {open_quotes}as-found{close_quotes} condition from November 1989 through March 1990. Following retrofit of the AOFA system during a four-week outage in spring 1990, the AOFA configuration was tested from August 1990 through March 1991. The FWEC CF/SF low NOx burners were then installed during a seven-week outage starting on March 8, 1991 and continuing to May 5, 1991. Following optimization of the LNBs and ancillary combustion equipment by FWEC personnel, LNB testing commenced during July 1991 and continued until January 1992. Testing in the LNB+AOFA configuration was completed during August 1993. This report provides documentation on the design criteria used in the performance of this project as it pertains to the scope involved with the low NOx burners and advanced overfire systems.

  6. Electromagnetic techniques for industrial plant process measurements and quality control

    Energy Technology Data Exchange (ETDEWEB)

    Bramanti, M. (Consiglio Nazionale delle Ricerche, Pisa (Italy). Ist. di Elaborazione della Informazione)

    1992-04-01

    In recent years, new real time non-destructive measuring techniques have been developed based on the use of miniaturized components capable of generating, amplifying and elaborating microwave signals (within the range of tenths of a volt and hundreds of milliamps). All these techniques for the measurement of typical process parameters or the non-destructive testing of materials are based on the interaction of radiation with the material or system under examination and make use of the most modern types of data acquisition technology. This article surveys the sensors and measuring instruments which make use of electromagnetic radiation to acquire information concerning the properties of an examined material or system based on their interactions with electromagnetic fields. A few applications are illustrated, e.g., the measurement of unburnt coal in power plant fly ash, the measurement of the quantity of solid particles present in fluidized beds and the verification of the properties of dielectric materials. In each case, the optimum degree of resolution of these devices is made evident.

  7. Development and Experimental Validation of Large Eddy Simulation Techniques for the Prediction of Combustion-Dynamic Process in Syngas Combustion: Characterization of Autoignition, Flashback, and Flame-Liftoff at Gas-Turbine Relevant Operating Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Ihme, Matthias [Univ. of Michigan, Ann Arbor, MI (United States); Driscoll, James [Univ. of Michigan, Ann Arbor, MI (United States)

    2015-08-31

    The objective of this closely coordinated experimental and computational research effort is the development of simulation techniques for the prediction of combustion processes, relevant to the oxidation of syngas and high hydrogen content (HHC) fuels at gas-turbine relevant operating conditions. Specifically, the research goals are (i) the characterization of the sensitivity of syngas ignition processes to hydrodynamic processes and perturbations in temperature and mixture composition in rapid compression machines and ow-reactors and (ii) to conduct comprehensive experimental investigations in a swirl-stabilized gas turbine (GT) combustor under realistic high-pressure operating conditions in order (iii) to obtain fundamental understanding about mechanisms controlling unstable flame regimes in HHC-combustion.

  8. Structural, magnetic and gas sensing properties of nanosized copper ferrite powder synthesized by sol gel combustion technique

    Energy Technology Data Exchange (ETDEWEB)

    Sumangala, T.P.; Mahender, C. [Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Powai, Mumbai 400076 (India); Barnabe, A. [Université de Toulouse, Institut Carnot CIRIMAT – UMR CNRS-UPS-INP 5085, Université Paul Sabatier, Toulouse 31062 (France); Venkataramani, N. [Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Powai, Mumbai 400076 (India); Prasad, Shiva, E-mail: shiva.pd@gmail.com [Department of Physics, Indian Institute of Technology Bombay, Powai, Mumbai 400076 (India)

    2016-11-15

    Stoichiometric nano sized copper ferrite particles were synthesized by sol gel combustion technique. They were then calcined at various temperatures ranging from 300–800 °C and were either furnace cooled or quenched in liquid nitrogen. A high magnetisation value of 48.2 emu/g signifying the cubic phase of copper ferrite, was obtained for sample quenched to liquid nitrogen temperature from 800 °C. The ethanol sensing response of the samples was studied and a maximum of 86% response was obtained for 500 ppm ethanol in the case of a furnace cooled sample calcined at 800 °C. The chemical sensing is seen to be correlated with the c/a ratio and is best in the case of tetragonal copper ferrite. - Highlights: • One of the first study on ethanol sensing of cubic copper ferrite. • In-situ High temperature XRD done shows phase transition from cubic to tetragonal. • A non-monotonic increase in magnetization was seen with calcination temperature. • A response of 86% was obtained towards 500 ppm ethanol. • Tried to correlate sensing response and ion content in spinel structure.

  9. Low dielectric loss in nano-Li-ferrite spinels prepared by sol–gel auto-combustion technique

    Indian Academy of Sciences (India)

    Mamata Maisnam; Nandeibam Nilima; Maisnam Victory; Sumitra Phanjoubam

    2016-02-01

    Pure and doped nano-Li-ferrite spinels were prepared by the sol–gel auto-combustion technique. The prepared ferrites were pelleted and heat treated at different temperatures. Structural characterization was carried out on the as-prepared samples and also on the heat-treated samples using X-ray diffraction (XRD). The studies confirmed the formation of single phase with spinel structures in all the samples. The crystallite size of the samples evaluated from XRD data was found to be 17–24 nm. Scanning electron microscopic photomicrographs revealed the microstructures and the grain size of these nanoferrites. The room-temperature dielectric constant and dielectric loss tangent, tan δ were measured as a function of frequency in the range 100 Hz–1 MHz. These nanoferrites showed the normal dielectric dispersion behaviour. The observed dielectric constant and dielectric loss tangent were found to be much lower than those measured on substituted Li-ferrites prepared by the conventional ceramic method. The results obtained were discussed in the paper.

  10. Comparison of different techniques for time-frequency analysis of internal combustion engine vibration signals

    Institute of Scientific and Technical Information of China (English)

    Yang JIN; Zhi-yong HAO; Xu ZHENG

    2011-01-01

    In this study,we report an analysis of cylinder head vibration signals at a steady engine speed using short-time Fourier transform (STFT).Three popular time-frequency analysis techniques,i.e.,STFT,analytic wavelet transform (AWT) and S transform (ST),have been examined.AWT and ST are often applied in engine signal analyses.In particular,an AWT expression in terms of the quality factor Q and an analytical relationship between ST and AWT have been derived.The time-frequency resolution of a Gaussian function windowed STFT was studied via numerical simulation.Based on the simulation,the empirical limits for the lowest distinguishable frequency as well as the time and frequency resolutions were determined.These can provide insights for window width selection,spectrogram interpretation and artifact identification.Gaussian function windowed STFTs were applied to some cylinder head vibration signals.The spectrograms of the same signals from ST and AWT were also determined for comparison.The results indicate that the uniform resolution feature of STFT is not necessarily a disadvantage for time-frequency analysis of vibration signals when the engine is in stationary state because it can more accurately localize the frequency components excited by transient excitations without much loss of time resolution.

  11. Combustion gas cleaning in the ceramic tile industry: technical guide; Nettoyage des fumees de combustion dans l'industrie ceramique: guide technique

    Energy Technology Data Exchange (ETDEWEB)

    Lezaun, F.J. [ENAGAS-Grupo Gas Natural (Spain); Mallol, G.; Monfort, E. [instituto de Tecnologia Ceramica, ITC (Spain); Busani, G. [Agenzia Regionale per la Prevenzione e l' Amiente, ARPA (Spain)

    2000-07-01

    This document presents a summary of a technical guide drawn up on combustion gas cleaning systems in ceramic frit and tile production. The guide describes the method to be followed for selecting the best possible solutions for reducing pollutant concentrations in different emission sources, in accordance with current regulatory requirements and the CET recommendation. There are three sources of combustion gas air emissions that need to be cleaned in ceramic tile and frit production and they are usually related to the following process stages: slip spray drying, tile firing and frit melting. The different nature of the emissions means that different substances will need to be cleaned in each emission. Thus, in spray drying and frit melting, the only species to be cleaned are suspended particles, while in tile firing, it is also necessary to reduce the fluorine concentration. The systems analysed in this guide are mainly wet cleaning systems, bag filters and electrostatic precipitators. In the study, the efficiency of these cleaning systems is compared at each emission source from a technical and economic point of view, and concrete solutions are put forward in each case, together with a list of suppliers of the technologies involved. (authors)

  12. Developing of FTIR- and new probe technique for combustion gas analysis; Utveckling av FTIR- och sondteknik foer gasanalys i foerbraenningsrum

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Annika; Andersson, Christer [Vattenfall Utveckling AB, Stockholm (Sweden); Thulin, C. [Swedish National Testing and Research Inst., Boraas (Sweden); Karlsson, Maria; Aamand, L.E. [Chalmers Univ. of Technology, Goeteborg (Sweden)

    1996-08-01

    The objective of the reported project has been to develop and field test a versatile measurement system for combustion gases based on the FTIR technique. The project has included the following stages: Development of gas sampling methods, Further development of the FTIR technique, Field testing of the measurement system. The development of evaluation routines based on CLS and PLS methods has lead to the conclusion that both methods are well suited for the application in question, which enables an automation of the evaluation procedure. However, the elaboration of versatile and quality controlled methods is time consuming and the application requires a qualified user. With the dilution probe prototype, a satisfactory rejection of particles is achieved at the same time as a good mixing of the dilution gas and the sample gas takes place. Sampling is performed without using a filter at the probe tip. The intended function of the probe requires that most particles can be rejected without giving rise to a too high dilution ratio. This was achieved in the middle and upper part of the CFB boiler. Comparisons of measurement data from field measurements with the developed probe concept and the `conventional` CTH extractive probe show that the results are in good agreement in many cases, but also that interesting discrepancies exist. Sampling artefacts have been noticed for the gases HCN and SO{sub 2}, where HCN and SO{sub 2} are found in higher concentrations when sampling with the dilution probe. Analyzed concentrations of CO and hydrocarbons (methane, ethene and acetylene) are throughout all the measurements lower when the dilution probe is used. 21 refs, 34 figs, 29 tabs

  13. KHD combustion chamber. Flexible use of alternative fuels in the cement plant; KHD Brennkammer. Flexibler Einsatz von alternativen Brennstoffen im Zementwerk

    Energy Technology Data Exchange (ETDEWEB)

    Schuermann, Heiko [Humboldt Wedag GmbH, Koeln (Germany)

    2012-07-01

    In many parts of the world, the use of alternative fuels is a recognized measure for reducing the CO{sub 2} emissions that result from burning primary fuels such as coal, oil and natural gas. Alternative or secondary fuels are the terms used for combustible residues from industrial and commercial manufacturing processes, agricultural production, and sorted municipal refuse. Due to the wide range of possible sources of alternative fuels, there is very great variation in their energy content, ash, moisture content, particle size, form, density etc., so there is no patent solution for their use in a cement plant. For proper operation of the rotary kiln, it is particularly important to use alternative fuel qualities that have good heat value and reactivity in order to achieve a stable, hot sintering zone and to completely burnout the highest possible amount of the fuel while it is suspended in the air stream. Combustion in the calciner places fewer demands on the properties of the alternative fuels than combustion in the rotary kiln burner does. This means that the calciner is the ideal combustion point for the usage of alternative fuels. To enable maximum possible flexibility for the combustion of widely differing alternative fuels in the calciner, KHD Humboldt Wedag offers the option of installing a combustion chamber in the modular PYROCLON calciner system. Due to the operating characteristics of this combustion chamber, which are described in the following sections of this article, even alternative fuels with low heat values and a low degree of preparation can be safely and completely burnt. (orig.)

  14. Developments in the pre-combustion CO2 capture pilot plant at the Buggenum IGCC

    NARCIS (Netherlands)

    Damen, K.; Gnutek, R.; Kaptein, J.; Nannan, N.R.; Oyarzun, B.; Trapp, C.; Colonna, P.; Van Dijk, E.; Gross, J.; Bardow, A.

    2011-01-01

    N.V. Nuon (part of the Vattenfall Group) operates an IGCC in Buggenum and is developing a multi-fuel IGCC with CO2 capture and storage (Nuon Magnum) in Eemshaven, the Netherlands. In order to prepare for large-scale application of CO2 capture and storage, a CO2 capture pilot plant is constructed at

  15. Developments in the pre-combustion CO2 capture pilot plant at the Buggenum IGCC

    NARCIS (Netherlands)

    Damen, K.; Gnutek, R.; Kaptein, J.; Nannan, N.R.; Oyarzun, B.; Trapp, C.; Colonna, P.; Van Dijk, E.; Gross, J.; Bardow, A.

    2011-01-01

    N.V. Nuon (part of the Vattenfall Group) operates an IGCC in Buggenum and is developing a multi-fuel IGCC with CO2 capture and storage (Nuon Magnum) in Eemshaven, the Netherlands. In order to prepare for large-scale application of CO2 capture and storage, a CO2 capture pilot plant is constructed at

  16. Advanced air staging techniques to improve fuel flexibility, reliability and emissions in fluidized bed co-combustion

    Energy Technology Data Exchange (ETDEWEB)

    Aamand, Lars-Erik; Leckner, Bo [Chalmers Technical Univ., Goeteborg (Sweden); Luecke, Karsten; Werther, Joachim [Technical Univ. of Hamburg-Harburg (Germany)

    2001-12-01

    A joint research project between the Technical University of Hamburg-Harburg and Chalmers Technical University. For operation under co-combustion the following results should be considered: The high ash content of the sewage sludge results in significantly increased ash flows. Although high alkali metal concentrations are found in the sewage sludge ash, no critical concentrations were reached and tendencies to fouling were not observed. The trace metal input rises with increased sludge fraction. However, emissions of metal compounds were well below legal limits. The trace metals tend to accumulate on the fly ash. In general, very low fuel nitrogen conversions to NO and N{sub 2}O of 2 - 4 % are achievable. With coal as a base fuel alternative air staging with secondary air supply after solids separation attains even lower NO emissions than normal staging without strongly affecting CO and SO{sub 2} emissions. Alternative staging also reduces N{sub 2}O emissions. An optimum for the excess air ratio in the riser of 1.05 was found for a total excess air ratio of 1.2. The higher the volatile content of the fuel is, the less effective the NO reduction due to air staging becomes. The measurements suggest that the optimum gas residence time regarding the emissions in CFB combustors is around 6 to 7 s. These times are achieved in commercial scale plants due to their large cyclones that perhaps partly can replace a large afterburner chamber. The circulating fluidized bed boiler can be operated in a very flexible way with various fuel mixtures up to an energy fraction of sludge of 25% without exceeding legal emission limits.

  17. Spectral unmixing techniques for retrieving plant foliar information

    Science.gov (United States)

    Themelis, Kostas; Sykioti, Olga; Rontogiannis, Athanasios; Koutroumbas, Konstantinos; Kyparissis, Aris

    2010-05-01

    In this study two novel approaches for supervised and semi-supervised hyperspectral unmixing are applied in the unmixing of CHRIS/PROBA data, in order to monitor seasonal land cover changes - in particular plant foliar coverage. Foliar coverage variations are directly linked to seasonal changes of the ecophysiological status of a plant (i.e. growth status, pigment concentrations, LAI etc). The high potential of using hyperspectral satellite data in monitoring plant biochemical and structural characteristics is important in ecophysiological studies. A reliable and efficient method to extract leaf and/or canopy information from a mixed pixel significantly contributes towards this direction. In this study, the development of two efficient algorithms in spectral unmixing enables the detection and mapping of leaf contribution to the overall pixel spectra and its seasonal variations. For this purpose, leaf spectra measured in the field, simultaneously to satellite acquisitions, are included in the endmember data set. The proposed unmixing techniques are performed on ground reflectances, assuming knowledge of the number and spectral signatures of the objects present in the images. An efficient estimation for their corresponding fractions in the pixels of the image is developed, based on a recently proposed maximum a posteriori probability (MAP) method. By exploiting the constraints naturally imposed to the problem, closed form expressions are derived for the statistical parameters required by the MAP estimator. In the semi-supervised scenario, we assume that a spectral library is given, containing spectral signatures of multiple endmembers. The objective in the latter case, is (a) to determine how many and which endmembers are present in the mixed pixel under study and (b) to use the selected endmembers to estimate the corresponding abundance fractions - especially the abundance of foliar coverage. The approach is based on a properly modified weighted l1-regularized least

  18. Experimental chemical thermodynamics. Volume I. Combustion calorimetry

    Energy Technology Data Exchange (ETDEWEB)

    Sunner, S.; Mansson, M. (eds.)

    1979-01-01

    This book contains 18 chapters. The information included is: units and physical constants; basic principles of combustion calorimetry; calibration of combustion calorimeters; test and auxiliary substances in combustion calorimetry; strategies in the calculation of standard-state energies of combustion from the experimentally determined quantities; assignments of uncertainties; presentation of combustion calorimetric data in the primary literature; general techniques for combustion of liquid/solid organic compounds by oxygen bomb calorimetry; combustion of liquid/solid organic compounds with non-metallic hetero-atoms; combustion calorimetry of metals and simple metallic compounds; combustion calorimetry of organometallic compounds; combustion in fluorine and other halogens; bomb combustion of gaseous compounds in oxygen; oxygen flame calorimetry; fluorine flame calorimetry; combustion calorimetry as a technological service; trends in combustion calorimetry; and from the history of combustion calorimetry. (DP)

  19. Near-Zero Emissions Oxy-Combustion Flue Gas Purification - Power Plant Performance

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Seltzer; Zhen Fan

    2011-03-01

    A technical feasibility assessment was performed for retrofitting oxy-fuel technology to an existing power plant burning low sulfur PRB fuel and high sulfur bituminous fuel. The focus of this study was on the boiler/power generation island of a subcritical steam cycle power plant. The power plant performance in air and oxy-firing modes was estimated and modifications required for oxy-firing capabilities were identified. A 460 MWe (gross) reference subcritical PC power plant was modeled. The reference air-fired plant has a boiler efficiency (PRB/Bituminous) of 86.7%/89.3% and a plant net efficiency of 35.8/36.7%. Net efficiency for oxy-fuel firing including ASU/CPU duty is 25.6%/26.6% (PRB/Bituminous). The oxy-fuel flue gas recirculation flow to the boiler is 68%/72% (PRB/bituminous) of the flue gas (average O{sub 2} in feed gas is 27.4%/26.4%v (PRB/bituminous)). Maximum increase in tube wall temperature is less than 10ºF for oxy-fuel firing. For oxy-fuel firing, ammonia injected to the SCR was shut-off and the FGD is applied to remove SOx from the recycled primary gas stream and a portion of the SOx from the secondary stream for the high sulfur bituminous coal. Based on CFD simulations it was determined that at the furnace outlet compared to air-firing, SO{sub 3}/SO{sub 2} mole ratio is about the same, NOx ppmv level is about the same for PRB-firing and 2.5 times for bituminous-firing due to shutting off the OFA, and CO mole fraction is approximately double. A conceptual level cost estimate was performed for the incremental equipment and installation cost of the oxyfuel retrofit in the boiler island and steam system. The cost of the retrofit is estimated to be approximately 81 M$ for PRB low sulfur fuel and 84 M$ for bituminous high sulfur fuel.

  20. Environmental and socio-economic assessment of co-combustion of coal, biomass and non-hazardous wastes in a full scale power plant

    Energy Technology Data Exchange (ETDEWEB)

    Morais, J.; N. Lapa, N.; Barbosa, R.; Santos, A.; Mendes, B.; Oliveira, J.F. Santos [Environmental Biotechnology Researching, Faculty of Science and Technology, New University of Lisboa (Portugal)

    2008-07-01

    A European project (COPOWER) was developed to assess the possibility to partially replace the coal used in a 243 MWth Power Plant by biomass and non-toxic wastes for the production of electricity. Three combustion scenarios were studied, based on the combustion tests performed at the Stadtwerke Duisburg Power Plant: Scenario 0 (Sc0) - combustion of coal; Scenario 1 (Sc1) - combustion of coal + Sewage Sludge (SS) + Meat and Bone Meal (MBM); Scenario 2 (Sc2) - coal + SS + Wood Pellets (WP). A socio-economic and environmental assessment was performed. In the environmental point of view, Sc0 was the worst scenario, mainly due to the emission of greenhouse gases (GHG). Sc1 was the best scenario, mainly due to the reduction on the GHG emission, substances that contribute for eutrophication and ozone depletion gases. In the socio-economic point of view, Sc0 was the worst scenario, mainly due to the absence of GHG abatement, and Sc1 was the best scenario due to the best cost of the electricity production and negative cost of avoided emissions.

  1. Laboratory techniques in plant molecular biology taught with UniformMu insertion alleles of maize

    Science.gov (United States)

    An undergraduate course - Laboratory Techniques in Plant Molecular Biology - was organized around our research application of UniformMu insertion alleles to investigate mitochondrial functions in plant reproduction. The course objectives were to develop students’ laboratory, record keeping, bioinfor...

  2. 低挥发分煤粉燃烧新技术发展与应用%Development and application of low volatile pulverized coal combustion technique

    Institute of Scientific and Technical Information of China (English)

    周建明

    2011-01-01

    Introduce the development and application of low volatile pulverized coal combustion technique. The representative burners and framework of boilers were demonstrated and the key techniques, including strengthening hot gas back flow,keeping adopting pulverized coal concentration,and extending length of flame,were also analyzed and these techniques can help pulverized coal ignite quickly and keep stable ignition. The suitable combustion system should be strictly chosen for low volatilization pulverized coal, such as tangentially firing, opposed firing, W-shape flame, and CUF firing and so on. Meanwhile, being the superior stability in anthracite combustion to tangential firing and opposed firing,W-shape boilers are mainly used. Having the strongpoint of stable combustion, high combustion efficiency, stepped firing in recirculation and low NO, emission, the high-temperature combustion technique for low volatilization coal will have wide application foreground.%介绍了国内外低挥发分煤粉燃烧技术及发展.对具有代表性的燃烧器及炉膛结构进行简要分析,说明热回流、煤粉浓缩、延长火焰长度等关键技术在实现低挥发分难燃煤粉快速着火、稳定燃烧中的应用.指出尽管燃烧器在应用中取得一定的效果,但仍然存在一些问题,因而对于低挥发分煤种还需要同时选择合理的燃烧方式,如切向燃烧、对冲燃烧、W型火焰燃烧及CUF火焰燃烧等技术.其中,W型火焰燃烧方式对难燃无烟煤的燃烧稳定性优于四角和对冲燃烧方式,是目前主要采用的燃烧结构.高温空气燃烧技术对低挥发分煤具有火焰稳定、热效率高、再循环分级燃烧,低NOx排放等优点,将成为更有前景的燃烧技术.

  3. 钠钙玻璃熔窑应慎用全氧燃烧技术%Careful Application of Oxy- fuel Combustion Technique to Soda- lime Glass Furnace

    Institute of Scientific and Technical Information of China (English)

    梁德海

    2011-01-01

    通过对普通空气助燃熔窑和全氧燃烧熔窑的对比分析,指出在国内以火力发电为主的现状下,对熔化率高、熔化能耗低及产品产值不高的普通钠钙玻璃熔窑,采用全氧燃烧技术后不能节能,氮氧化物减排效果不明显,成本也有所提高,目前应慎重选用全氧燃烧技术;对于熔制质量要求高、熔化能耗较大及产品产值高的特种玻璃,采用全氧燃烧技术后节能和NOx减排明显,成本降低,经济效益和社会效益好,可考虑逐步推行全氧燃烧技术.%Through the comparison of common air - fuel combustion with oxy - fuel combustion in glass melting furnaces the author pointed out that under the present situation in China that thermal power generation is the major electrical energy, using oxy - fuel combustion technique in melting soda lime glasses with high melting rate, low energy consumption and low output value cannot save energy and Nox emission reduction is also not obvious. Moreover, the production cost is highly increased. Therefore, using oxy - fuel combustion technique to melting soda - lime glasses should be very cautious. As far as special glasses with strict requirements in melting quality, high energy consumption in melting and high output value are concerned, using oxy - fuel combustion technique will save energy and reduce Nox emission remarkably, and production cost will lower down and economic and social benefits will increase as well. For this reason it can be considered that oxy - fuel combustion technique could be widely used for melting above mentioned special glasses step by step.

  4. Magnetic, electrical and dielectric behaviour of Ni 0.8Zn 0.2Fe 2O 4 prepared through flash combustion technique

    Science.gov (United States)

    Mangalaraja, R. V.; Ananthakumar, S.; Manohar, P.; Gnanam, F. D.

    2002-12-01

    Nickel-zinc ferrites of composition Ni 0.8Zn 0.2Fe 2O 4 were prepared by flash combustion technique and sintered at various sintering temperatures such as 1150°C, 1250°C and 1350°C. Magnetic properties like hysteresis parameters, saturation magnetisation and Curie temperature were studied. Electrical properties namely AC-resistivity as a function of frequency and DC-resistivity as a function of temperature were studied for ferrite samples sintered at various temperatures. Dielectric properties such as dielectric constant, ɛ' and dielectric loss factor, tan δ were also studied for ferrite samples as a function of frequency. It is observed that Ni-Zn ferrites prepared by this method have AC-resistivity of the order 10 6-10 1 Ω cm for the frequency range from 1 kHz to 13 MHz and DC-resistivity of the order ⩾10 9 Ω cm is observed as the function of temperature from room temperature to 300°C. The resistivity obtained is higher than that of ferrites prepared by the conventional ceramic method. This is because of high purity, controlled microstructure and porosity of ferrites prepared by flash combustion technique. The dielectric constant and dielectric loss obtained for the ferrites prepared through this flash combustion technique possess lower value than that of the ferrites prepared by conventional ceramic method for the same composition. High resistivity and low dielectric behaviour make these ferrite materials useful in high frequency applications.

  5. Molecular hydrogen (H2 combustion emissions and their isotope (D/H signatures from domestic heaters, diesel vehicle engines, waste incinerator plants, and biomass burning

    Directory of Open Access Journals (Sweden)

    T. Röckmann

    2012-03-01

    Full Text Available Molecular hydrogen (H2, its stable isotope signature (δD, and the key combustion parameters carbon monoxide (CO, carbon dioxide (CO2, and methane (CH4 were measured from various combustion processes. H2 in the exhaust of gas and oil-fired heaters and of waste incinerator plants was generally depleted compared to ambient intake air, while CO was significantly elevated. These findings contradict the often assumed co-occurring net H2 and CO emissions in combustion processes and suggest that previous H2 emissions from combustion may have been overestimated when scaled to CO emissions. For the heater exhausts, H2 and δD generally decrease with increasing fuel-to-air ratio, from ambient values of ∼0.5 ppm and +130‰ to 0.2 ppm and −206‰, respectively. These results are interpreted as a combination of an isotopically light H2 source from fossil fuel combustion and a D/H kinetic isotope fractionation of hydrogen in the advected ambient air during its partial removal during combustion. Diesel exhaust measurements from dynamometer test stand driving cycles show elevated H2 and CO emissions during cold-start and some acceleration phases. Their molar H2/CO ratios are 2/CO emission ratios, along with CO global emission inventories, we estimate global H2 emissions for 2000, 2005, and 2010. For road transportation (gasoline and diesel, we calculate 8.6 ± 2.1 Tg, 6.3 ± 1.5 Tg, and 4.1 ± 1.0 Tg, respectively, whereas the contribution from diesel vehicles has increased from 5% to 8% over this time. Other fossil fuel emissions are believed to be negligible but H2 emissions from coal combustion are unknown. For residential (domestic emissions, which are likely dominated by biofuel combustion, emissions for the same years are estimated at 2.7 ± 0.7 Tg, 2.8 ± 0.7 Tg, and 3.0 ± 0.8 Tg, respectively. Our wood combustion measurements are combined with results from the literature to calculate biomass burning emissions. For these estimates, we propose a

  6. Alstom's Chemical Looping Combustion Prototype for CO2 Capture from Existing Pulverized Coal-Fired Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Andrus, Jr., Herbert E. [Alstom Power Inc., Windsor, CT (United States); Chiu, John H. [Alstom Power Inc., Windsor, CT (United States); Edberg, Carl D. [Alstom Power Inc., Windsor, CT (United States); Thibeault, Paul R. [Alstom Power Inc., Windsor, CT (United States); Turek, David G. [Alstom Power Inc., Windsor, CT (United States)

    2012-09-30

    Alstom’s Limestone Chemical Looping (LCL™) process has the potential to capture CO2 from new and existing coal-fired power plants while maintaining high plant power generation efficiency. This new power plant concept is based on a hybrid combustion- gasification process utilizing high temperature chemical and thermal looping technology. This process could also be potentially configured as a hybrid combustion-gasification process producing a syngas or hydrogen for various applications while also producing a separate stream of CO2 for use or sequestration. The targets set for this technology is to capture over 90% of the total carbon in the coal at cost of electricity which is less than 20% greater than Conventional PC or CFB units. Previous work with bench scale test and a 65 kWt Process Development Unit Development (PDU) has validated the chemistry required for the chemical looping process and provided for the investigation of the solids transport mechanisms and design requirements. The objective of this project is to continue development of the combustion option of chemical looping (LCL-C™) by designing, building and testing a 3 MWt prototype facility. The prototype includes all of the equipment that is required to operate the chemical looping plant in a fully integrated manner with all major systems in service. Data from the design, construction, and testing will be used to characterize environmental performance, identify and address technical risks, reassess commercial plant economics, and develop design information for a demonstration plant planned to follow the proposed Prototype. A cold flow model of the prototype will be used to predict operating conditions for the prototype and help in operator training. Operation of the prototype will provide operator experience with this new technology and performance data of the LCL-C™ process, which will be applied to the commercial design and economics and plan for a future demonstration

  7. Alstom's Chemical Looping Combustion Prototype for CO{sub 2} Capture from Existing Pulverized Coal-Fired Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Andrus, Herbert; Chiu, John; Edberg, Carl; Thibeault, Paul; Turek, David

    2012-09-30

    Alstom’s Limestone Chemical Looping (LCL™) process has the potential to capture CO{sub 2} from new and existing coal-fired power plants while maintaining high plant power generation efficiency. This new power plant concept is based on a hybrid combustion- gasification process utilizing high temperature chemical and thermal looping technology. This process could also be potentially configured as a hybrid combustion-gasification process producing a syngas or hydrogen for various applications while also producing a separate stream of CO{sub 2} for use or sequestration. The targets set for this technology is to capture over 90% of the total carbon in the coal at cost of electricity which is less than 20% greater than Conventional PC or CFB units. Previous work with bench scale test and a 65 kWt Process Development Unit Development (PDU) has validated the chemistry required for the chemical looping process and provided for the investigation of the solids transport mechanisms and design requirements. The objective of this project is to continue development of the combustion option of chemical looping (LCL-C™) by designing, building and testing a 3 MWt prototype facility. The prototype includes all of the equipment that is required to operate the chemical looping plant in a fully integrated manner with all major systems in service. Data from the design, construction, and testing will be used to characterize environmental performance, identify and address technical risks, reassess commercial plant economics, and develop design information for a demonstration plant planned to follow the proposed Prototype. A cold flow model of the prototype will be used to predict operating conditions for the prototype and help in operator training. Operation of the prototype will provide operator experience with this new technology and performance data of the LCL-C™ process, which will be applied to the commercial design and economics and plan for a future demonstration plant.

  8. Intelligent Monitoring System With High Temperature Distributed Fiberoptic Sensor For Power Plant Combustion Processes

    Energy Technology Data Exchange (ETDEWEB)

    Kwang Y. Lee; Stuart S. Yin; Andre Boheman

    2005-12-26

    The objective of the proposed work is to develop an intelligent distributed fiber optical sensor system for real-time monitoring of high temperature in a boiler furnace in power plants. Of particular interest is the estimation of spatial and temporal distributions of high temperatures within a boiler furnace, which will be essential in assessing and controlling the mechanisms that form and remove pollutants at the source, such as NOx. The basic approach in developing the proposed sensor system is three fold: (1) development of high temperature distributed fiber optical sensor capable of measuring temperatures greater than 2000 C degree with spatial resolution of less than 1 cm; (2) development of distributed parameter system (DPS) models to map the three-dimensional (3D) temperature distribution for the furnace; and (3) development of an intelligent monitoring system for real-time monitoring of the 3D boiler temperature distribution. Under Task 1, we set up a dedicated high power, ultrafast laser system for fabricating in-fiber gratings in harsh environment optical fibers, successfully fabricated gratings in single crystal sapphire fibers by the high power laser system, and developed highly sensitive long period gratings (lpg) by electric arc. Under Task 2, relevant mathematical modeling studies of NOx formation in practical combustors. Studies show that in boiler systems with no swirl, the distributed temperature sensor may provide information sufficient to predict trends of NOx at the boiler exit. Under Task 3, we investigate a mathematical approach to extrapolation of the temperature distribution within a power plant boiler facility, using a combination of a modified neural network architecture and semigroup theory. The 3D temperature data is furnished by the Penn State Energy Institute using FLUENT. Given a set of empirical data with no analytic expression, we first develop an analytic description and then extend that model along a single axis. Extrapolation

  9. DEVELOPMENT OF SiC DEVICES FOR DIAGNOSTICS AND CONTROL OF COMBUSTION PRODUCTS IN ENERGY PLANT ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Ruby N. Ghosh; Peter Tobias

    2003-12-01

    A sensor based on the wide bandgap semiconductor, silicon carbide (SiC), has been developed for the detection of combustion products in power plant environments. The sensor is a catalytic gate field effect device that can detect hydrogen containing species in chemically reactive, high temperature environments. The response of these metal/insulator/SiC (MISiC) devices to reducing gases has been assumed to be due to the reduction in the metal work function at the metal/oxide interface that shifts the capacitance to lower voltages. From in-situ capacitance-voltage measurements taken under sensor operating conditions we have discovered that two independent mechanisms are responsible for the sensor response to hydrogen and oxygen. We present a model of the device response based on the chemically induced shift of the metal/semiconductor barrier height as well as the passivation and creation of charged states at the SiO{sub 2}/SiC interface. The latter mechanism is much slower than the barrier height shift. Preliminary photoemission experiments have been performed to independently monitor the contribution of the two phenomena. We discuss in detail the effect of these results on sensor design and the choice of operating point for high temperature operation.

  10. Catalytic combustion in small wood burning appliances

    Energy Technology Data Exchange (ETDEWEB)

    Oravainen, H. [VTT Energy, Jyvaeskylae (Finland)

    1996-12-31

    There is over a million hand fired small heating appliances in Finland where about 5,4 million cubic meters of wood fuel is used. Combustion in such heating appliances is a batch-type process. In early stages of combustion when volatiles are burned, the formation of carbon monoxide (CO) and other combustible gases are difficult to avoid when using fuels that have high volatile matter content. Harmful emissions are formed mostly after each fuel adding but also during char burnout period. When the CO-content in flue gases is, say over 0.5 %, also other harmful emissions will be formed. Methane (CH{sub 4}) and other hydrocarbons are released and the amount of polycyclic aromatic hydrocarbons (PAH)-compounds can be remarkable. Some PAH-compounds are very carcinogenic. It has been estimated that in Finland even more than 90 % of hydrocarbon and PAH emissions are due to small scale wood combustion. Emissions from transportation is excluded from these figures. That is why wood combustion has a net effect on greenhouse gas phenomena. For example carbon monoxide emissions from small scale wood combustion are two fold compared to that of energy production in power plants. Methane emission is of the same order as emission from transportation and seven fold compared with those of energy production. Emissions from small heating appliances can be reduced by developing the combustion techniques, but also by using other means, for example catalytic converters. In certain stages of the batch combustion, temperature is not high enough, gas mixing is not good enough and residence time is too short for complete combustion. When placed to a suitable place inside a heating appliance, a catalytic converter can oxidize unburned gases in the flue gas into compounds that are not harmful to the environment. (3 refs.)

  11. Simulating Fire Disturbance and Plant Mortality Using Antecedent Eco-hydrological Conditions to Inform a Physically Based Combustion Model

    Science.gov (United States)

    Atchley, A. L.; Linn, R.; Middleton, R. S.; Runde, I.; Coon, E.; Michaletz, S. T.

    2016-12-01

    Wildfire is a complex agent of change that both affects and depends on eco-hydrological systems, thereby constituting a tightly linked system of disturbances and eco-hydrological conditions. For example, structure, build-up, and moisture content of fuel are dependent on eco-hydrological regimes, which impacts fire spread and intensity. Fire behavior, on the other hand, determines the severity and extent of eco-hydrological disturbance, often resulting in a mosaic of untouched, stressed, damaged, or completely destroyed vegetation within the fire perimeter. This in turn drives new eco-hydrological system behavior. The cycles of disturbance and recovery present a complex evolving system with many unknowns especially in the face of climate change that has implications for fire risk, water supply, and forest composition. Physically-based numerical experiments that attempt to capture the complex linkages between eco-hydrological regimes that affect fire behavior and the echo-hydrological response from those fire disturbances help build the understanding required to project how fire disturbance and eco-hydrological conditions coevolve over time. Here we explore the use of FIRETEC—a physically-based 3D combustion model that solves conservation of mass, momentum, energy, and chemical species—to resolve fire spread over complex terrain and fuel structures. Uniquely, we couple a physically-based plant mortality model with FIRETEC and examine the resultant hydrologic impact. In this proof of concept demonstration we spatially distribute fuel structure and moisture content based on the eco-hydrological condition to use as input for FIRETEC. The fire behavior simulation then produces localized burn severity and heat injures which are used as input to a spatially-informed plant mortality model. Ultimately we demonstrate the applicability of physically-based models to explore integrated disturbance and eco-hydrologic response to wildfire behavior and specifically map how fire

  12. Reducing water usage with rotary regenerative gas/gas heat exchangers in natural gas-fired power plants with post-combustion carbon capture

    OpenAIRE

    Herraiz, Laura; Hogg, Dougal; Cooper, Jim; Gibbins, Jon; Lucquiaud, Mathieu

    2015-01-01

    It is possible to greatly mitigate the increase of water usage associated with the addition of carbon capture to fossil fuel power generation. This article presents a first-of-a-kind feasibility study of a series of technology options with rotary regenerative gas/gas heat exchangers for the management of the water balance around post-combustion carbon capture process integrated with Combined Cycle Gas Turbine (CCGT) plants with and without exhaust gas recirculation (EGR). Hybrid cooling confi...

  13. Combustion characterization of coal fines recovered from the handling plant. Quarterly technical progress report no. 3, April 1, 1995--June 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Houshang, M.; Samudrala, S.R.; Mohannad, O. [and others

    1995-07-01

    The main goal of this research project is to evaluate the combustion characteristics of the slurry fuels prepared from the recovered coal fines and plant coal fines. A specific study will include the combustion behavior, flame stability, ash behavior and emissions of SO{sub x}, NO{sub x} and particulate in a well insulated laboratory scale furnace in which the residence time and temperature history of the burning particles are similar to that of utility boiler furnace at 750,000 Btu/hr input and 20% excess air. The slurry fuel will be prepared at 60% solid to match the generic slurry properties, i.e., viscosity less than 500 cp, 100% of particles passing through 100 mesh and 80-90% of solid particles passing through 200 mesh. The coal blend is prepared using a mix of 15% effluent recovered coal and 85% plant fines. Combustion characteristics of the slurry fuels is determined at three different firing rates 750K, 625K, 500K Btu/hr. Finally a comparison of the results is made to determine the advantages of coal water slurry fuel over the plant coal blended form.

  14. Problematic issues of air protection during thermal processes related to the energetic uses of sewage sludge and other waste. Case study: Co-combustion in peaking power plant.

    Science.gov (United States)

    Hroncová, Emília; Ladomerský, Juraj; Musil, Juraj

    2017-08-19

    Currently, it is necessary to deal with issues related to the emissions as there is a constantly increasing interest in combusting sludge from sewage treatment plants in the boilers for wood. An analysis of the energetic importance of the combustion of sewage sludge has already been carried out, but the effects of various treatments of the sludge are not always clear, e.g. composting and subsequent combustion to the air pollution. Investments in other thermal processes of energetic utilisation of sewage sludge and organic waste are not always successfully implemented. The objective of this paper is to point out some problematic cases for acceptance of thermal processes related to energetic use of waste in terms of the air protection. The other aim is to mention the experience with solutions of such issues in Slovakia. There are mentioned first results of the operational validation experiments during the energy generation in circulating fluidized bed boiler in peaking power plant (Power 110MW) with the addition of the so-called alternative fuel based on wood and sewage sludge to the main fuel - black coal (anthracite). And there has already been achieved the highest share of 12.4%w. (dry matter) of sewage sludge in form of compost in blend with black coal, which is technologically viable. Moreover analyzed the problems of the authorization and operation of the co-combustion of sewage sludge and of combustion of products of various kinds of pyrolysis waste - pyrolysis gas and pyrolysis oil are analyzed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Intelligent Monitoring System with High Temperature Distributed Fiberoptic Sensor for Power Plant Combustion Processes

    Energy Technology Data Exchange (ETDEWEB)

    Kwang Y. Lee; Stuart S. Yin; Andre Boehman

    2006-09-26

    The objective of the proposed work is to develop an intelligent distributed fiber optical sensor system for real-time monitoring of high temperature in a boiler furnace in power plants. Of particular interest is the estimation of spatial and temporal distributions of high temperatures within a boiler furnace, which will be essential in assessing and controlling the mechanisms that form and remove pollutants at the source, such as NOx. The basic approach in developing the proposed sensor system is three fold: (1) development of high temperature distributed fiber optical sensor capable of measuring temperatures greater than 2000 C degree with spatial resolution of less than 1 cm; (2) development of distributed parameter system (DPS) models to map the three-dimensional (3D) temperature distribution for the furnace; and (3) development of an intelligent monitoring system for real-time monitoring of the 3D boiler temperature distribution. Under Task 1, we have set up a dedicated high power, ultrafast laser system for fabricating in-fiber gratings in harsh environment optical fibers, successfully fabricated gratings in single crystal sapphire fibers by the high power laser system, and developed highly sensitive long period gratings (lpg) by electric arc. Under Task 2, relevant mathematical modeling studies of NOx formation in practical combustors have been completed. Studies show that in boiler systems with no swirl, the distributed temperature sensor may provide information sufficient to predict trends of NOx at the boiler exit. Under Task 3, we have investigated a mathematical approach to extrapolation of the temperature distribution within a power plant boiler facility, using a combination of a modified neural network architecture and semigroup theory. Given a set of empirical data with no analytic expression, we first developed an analytic description and then extended that model along a single axis.

  16. INTELLIGENT MONITORING SYSTEM WITH HIGH TEMPERATURE DISTRIBUTED FIBEROPTIC SENSOR FOR POWER PLANT COMBUSTION PROCESSES

    Energy Technology Data Exchange (ETDEWEB)

    Kwang Y. Lee; Stuart S. Yin; Andre Boheman

    2004-12-26

    The objective of the proposed work is to develop an intelligent distributed fiber optical sensor system for real-time monitoring of high temperature in a boiler furnace in power plants. Of particular interest is the estimation of spatial and temporal distributions of high temperatures within a boiler furnace, which will be essential in assessing and controlling the mechanisms that form and remove pollutants at the source, such as NOx. The basic approach in developing the proposed sensor system is three fold: (1) development of high temperature distributed fiber optical sensor capable of measuring temperatures greater than 2000 C degree with spatial resolution of less than 1 cm; (2) development of distributed parameter system (DPS) models to map the three-dimensional (3D) temperature distribution for the furnace; and (3) development of an intelligent monitoring system for real-time monitoring of the 3D boiler temperature distribution. Under Task 1, improvement was made on the performance of in-fiber grating fabricated in single crystal sapphire fibers, test was performed on the grating performance of single crystal sapphire fiber with new fabrication methods, and the fabricated grating was applied to high temperature sensor. Under Task 2, models obtained from 3-D modeling of the Demonstration Boiler were used to study relationships between temperature and NOx, as the multi-dimensionality of such systems are most comparable with real-life boiler systems. Studies show that in boiler systems with no swirl, the distributed temperature sensor may provide information sufficient to predict trends of NOx at the boiler exit. Under Task 3, we investigate a mathematical approach to extrapolation of the temperature distribution within a power plant boiler facility, using a combination of a modified neural network architecture and semigroup theory. The 3D temperature data is furnished by the Penn State Energy Institute using FLUENT. Given a set of empirical data with no analytic

  17. 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. Public design report (preliminary and final)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This Public Design Report presents the design criteria of a DOE Innovative Clean Coal Technology (ICCT) project demonstrating advanced wall-fired combustion techniques for the reduction of NO{sub x} emissions from coal-fired boilers. The project is being conducted at Georgia Power Company`s Plant Hammond Unit 4 (500 MW) near Rome, Georgia. The technologies being demonstrated at this site include Foster Wheeler Energy Corporation`s advanced overfire air system and Controlled Flow/Split Flame low NO{sub x} burner. This report provides documentation on the design criteria used in the performance of this project as it pertains to the scope involved with the low NO{sub x} burners, advanced overfire systems, and digital control system.

  18. Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions.

    Science.gov (United States)

    Barbosa, Rui; Lapa, Nuno; Lopes, Helena; Gulyurtlu, Ibrahim; Mendes, Benilde

    2011-01-01

    Two combustion tests were performed in a fluidized bed combustor of a thermo-electric power plant: (1) combustion of coal; (2) co-combustion of coal (68.7% w/w), sewage sludge (9.2% w/w) and meat and bone meal (MBM) (22.1% w/w). Three samples of ashes (bottom, circulating and fly ashes) were collected in each combustion test. The ashes were submitted to the following assays: (a) evaluation of the leaching behaviour; (b) stabilization/solidification of fly ashes and evaluation of the leaching behaviour of the stabilized/solidified (s/s) materials; (c) production of concrete from bottom and circulating ashes. The eluates of all materials were submitted to chemical and ecotoxicological characterizations. The crude ashes have shown similar chemical and ecotoxicological properties. The s/s materials have presented compressive strengths between 25 and 40 MPa, low emission levels of metals through leaching and were classified as non-hazardous materials. The formulations of concrete have presented compressive strengths between 12 and 24 MPa. According to the Dutch Building Materials Decree, some concrete formulations can be used in both scenarios of limited moistening and without insulation, and with permanent moistening and with insulation.

  19. Emissions from waste combustion. An application of statistical experimental design in a laboratory-scale boiler and an investigation from large-scale incineration plants

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Xiaojing

    1997-05-01

    The aim of this thesis is a study of the emissions from the combustion of household refuse. The experiments were both on a laboratory-scale boiler and on full-scale incineration plants. In the laboratory, an artificial household refuse with known composition was fed into a pilot boiler with a stationary grate. Combustion was under non-optimum conditions. Direct sampling with a Tenax adsorbent was used to measure a range of VOCs. Measurements were also made of incompletely burnt hydrocarbons, carbon monoxide, carbon dioxide, oxygen and flue gas temperature. Combustion and emission parameters were recorded continuously by a multi-point data logger. VOCs were analysed by gas chromatography and mass spectrometry (GC/MS). The full-scale tests were on seven Swedish incineration plants. The data were used to evaluate the emissions from large-scale incineration plants with various type of fuels and incinerators, and were also compared with the laboratory results. The response surface model developed from the laboratory experiments was also validated. This thesis also includes studies on the gasification of household refuse pellets, estimations of particulate and soot emissions, and a thermodynamic analysis of PAHs from combustion flue gas. For pellet gasification, experiments were performed on single, well characterised refuse pellets under carefully controlled conditions. The aim was to see if the effects of pellets were different from those of untreated household refuse. The results from both laboratory and full-scale tests showed that the main contributions to emissions from household refuse are plastics and moisture. 142 refs, 82 figs, 51 tabs

  20. Experiments for the development of a circulating pressurized gasification plant (brown coal feeding and combustion). Combustion exeriments. Coal feeding experiments. Final report; Verfahrenstechnische Versuche fuer die Entwicklung einer zirkulierenden Druckwirbelschichtfeuerung (Braunkohleeintrag und -verbrennung). Verbrennungsversuche. Kohleeintragsversuche. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-09-01

    Combustion experiments with moist raw LAUBAG and MIBRAG coal were carried out in the pressurized gasification pilot plant at Friedrichsfeld. The following parameters wre investigated: Ignition and combustion behvaviour of the moist brown coal in a pressurized gasification plant; Emission ratings of CO, N{sub 2}O, NO{sub x}, SO{sub 2} and dust contents of standard coal; Combustion efficiencies at furnace temperatures over 850 C as determined by ash analysis; Measurements of the temperature distribution in the fluidized bed; Brown coal fly ash retention capacity of the hot gas filters; Analysis of ash turnover in order to maintain a stable circulation; Investigation of ash abrasion in circulating operation; Performance tests of secondary systems, e.g. feeding systems, ash removal systems for fly ash and bed ash, and measurement of the thermodynamic data in the ash cooler. [Deutsch] In der Druckwirbelschicht-Versuchsanlage Friedrichsfeld sind Verbrennungsversuche mit rohfeuchter LAUBAG- und rohfeuchter MIBRAG-Kohle durchgefuehrt worden. Bei genereller Verwendung des Aufbaus der Versuchsanlage Friedrichsfeld waren folgende Betriebs-/Auslegungswerte zu ermitteln: Ermittlung des Zuend- und des Ausbrandverhaltens der feuchten Braunkohle in der zirkulierenden Druckwirbelschichtfeuerung; Bestimmung der Emissionswerte wie CO, N{sub 2}O, NO{sub x}, SO{sub 2} und Staubgehalt fuer die Auslegungskohle; Bestimmung der Ausbrandwerte in der Asche bei einer Feuerraumtemperatur von ueber 850 C; Messung der Temepraturverteilung in der Wirbelschicht; Verhalten der Heissgasfilter bei Beaufschlagung mit Braunkohleflugasche; Untersuchung des Aschehaushaltes zur Erhaltung eines stabilen Zirkulationsbetriebes; Untersuchung des Ascheabriebverhaltens im Zirkulationsbetrieb; Pruefung der Funktionstuechtigkeit von Nebenanlagen wie Bekohlungseinrichtungen, Entaschungseinrichtungen fuer Flug- und Bettasche sowie Ermittlung der thermodynamischen Daten im vorhandenen Aschekuehler. (orig./HS)

  1. Viability study for application of combined reheater cycle (CRC) to fluidized bed combustion plants; Estudio de Viabilidad para la Aplicacion del Ciclo de Recalentamiento Combinado (CRC) a Plantas de Combustion de Lecho Fuido Atmosferico

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Basically, the project try to analyze the application viability of a first reheating in steam cycles of little power plants, useful mainly for biomass and wastes, in our case with coal blends; and a second reheating of the steam in conventional and fluidized bed combustion plants. Using in both cases the thermic energy of the exhaust gases from one gas turbine. The advantages of the CRC cycle are: (1) Reduction of the moisture in the turbine, increasing the energy efficiency and blade protection. (2) To take advantage of the waste gas energy from the gas turbine in optimum way. (3) Great operation flexibility under good efficiency results. In general, the system can use the synergy between gas, coal and waste energies with the highest global efficiency. (Author)

  2. DNA assembly for plant biology: techniques and tools.

    Science.gov (United States)

    Patron, Nicola J

    2014-06-01

    As the speed and accuracy of genome sequencing improves, there are ever-increasing resources available for the design and construction of synthetic DNA parts. These can be used to engineer plant genomes to produce new functions or to elucidate the function of endogenous sequences. Until recently the assembly of amplified or cloned sequences into large and complex designs was a limiting step in plant synthetic biology and biotechnology. A number of new methods for assembling DNA molecules have been developed in the last few years, several of which have been applied to the production of molecules used to modify plant genomes.

  3. The hybrid MPC-MINLP algorithm for optimal operation of coal-fired power plants with solvent based post-combustion CO2 capture

    Directory of Open Access Journals (Sweden)

    Norhuda Abdul Manaf

    2017-03-01

    Full Text Available This paper presents an algorithm that combines model predictive control (MPC with MINLP optimization and demonstrates its application for coal-fired power plants retrofitted with solvent based post-combustion CO2 capture (PCC plant. The objective function of the optimization algorithm works at a primary level to maximize plant economic revenue while considering an optimal carbon capture profile. At a secondary level, the MPC algorithm is used to control the performance of the PCC plant. Two techno-economic scenarios based on fixed (capture rate is constant and flexible (capture rate is variable operation modes are developed using actual electricity prices (2011 with fixed carbon prices ($AUD 5, 25, 50/tonne-CO2 for 24 h periods. Results show that fixed operation mode can bring about a ratio of net operating revenue deficit at an average of 6% against the superior flexible operation mode.

  4. INTELLIGENT MONITORING SYSTEM WITH HIGH TEMPERATURE DISTRIBUTED FIBEROPTIC SENSOR FOR POWER PLANT COMBUSTION PROCESSES

    Energy Technology Data Exchange (ETDEWEB)

    Kwang Y. Lee; Stuart S. Yin; Andre Boheman

    2003-12-26

    The objective of the proposed work is to develop an intelligent distributed fiber optical sensor system for real-time monitoring of high temperature in a boiler furnace in power plants. Of particular interest is the estimation of spatial and temporal distributions of high temperatures within a boiler furnace, which will be essential in assessing and controlling the mechanisms that form and remove pollutants at the source, such as NOx. The basic approach in developing the proposed sensor system is three fold: (1) development of high temperature distributed fiber optical sensor capable of measuring temperatures greater than 2000 C degree with spatial resolution of less than 1 cm; (2) development of distributed parameter system (DPS) models to map the three-dimensional (3D) temperature distribution for the furnace; and (3) development of an intelligent monitoring system for real-time monitoring of the 3D boiler temperature distribution. Under Task 1, the efforts focused on developing an innovative high temperature distributed fiber optic sensor by fabricating in-fiber gratings in single crystal sapphire fibers. So far, our major accomplishments include: Successfully grown alumina cladding layers on single crystal sapphire fibers, successfully fabricated in-fiber gratings in single crystal sapphire fibers, and successfully developed a high temperature distributed fiber optic sensor. Under Task 2, the emphasis has been on putting into place a computational capability for simulation of combustors. A PC workstation was acquired with dual Xeon processors and sufficient memory to support 3-D calculations. An existing license for Fluent software was expanded to include two PC processes, where the existing license was for a Unix workstation. Under Task 3, intelligent state estimation theory is being developed which will map the set of 1D (located judiciously within a 3D environment) measurement data into a 3D temperature profile. This theory presents a semigroup

  5. Overview of Prairie Planting Techniques and Maintenance Requirements

    Science.gov (United States)

    2007-02-01

    spring, late spring, or early summer. Most warm- season grasses, legumes and many composites do well in late spring plantings. In Kentucky , research...developed and proven by the NRCS for specific geographic regions of the country. Native grass seed (and often wildflower seed) is sold on a pure live...vernal pools are examples of fragile areas within a larger prairie ecosystem. These areas often have many rare species of plants and animals in

  6. Synthesis, structural investigation and magnetic properties of Zn{sup 2+} substituted cobalt ferrite nanoparticles prepared by the sol–gel auto-combustion technique

    Energy Technology Data Exchange (ETDEWEB)

    Raut, A.V., E-mail: nano9993@gmail.com [Vivekanand Arts and Sardar Dalipsingh Commerce and Science College, Aurangabad, 431004 Maharastra (India); Barkule, R.S.; Shengule, D.R. [Vivekanand Arts and Sardar Dalipsingh Commerce and Science College, Aurangabad, 431004 Maharastra (India); Jadhav, K.M., E-mail: drjadhavkm@gmail.com [Department of Physics, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad, 431004 Maharastra (India)

    2014-05-01

    Structural morphology and magnetic properties of the Co{sub 1−x}Zn{sub x}Fe{sub 2}O{sub 4} (0.0≤x≥1.0) spinel ferrite system synthesized by the sol–gel auto-combustion technique using nitrates of respective metal ions have been studied. The ratio of metal nitrates to citric acid was taken at 1:3. The as prepared powder of cobalt zinc ferrite was sintered at 600 °C for 12 h after TG/DTA thermal studies. Compositional stoichiometry was confirmed by energy dispersive analysis of the X-ray (EDAX) technique. Single phase cubic spinel structure of Co–Zn nanoparticles was confirmed by XRD data. The average crystallite size (t), lattice constant (a) and other structural parameters of zinc substituted cobalt ferrite nanoparticles were calculated from XRD followed by SEM and FTIR. It is observed that the sol–gel auto-combustion technique has many advantages for the synthesis of technologically applicable Co–Zn ferrite nanoparticles. The present investigation clearly shows the effect of the synthesis method and possible relation between magnetic properties and microstructure of the prepared samples. Increase in nonmagnetic Zn{sup 2+} content in cobalt ferrite nanoparticles is followed by decrease in n{sub B}, M{sub s} and other magnetic parameters. Squareness ratio for the Co-ferrite was 1.096 at room temperature. - Highlights: • Co–Zn nanoparticles are prepared by sol–gel auto-combustion method. • Structural properties were characterized by XRD, SEM, and FTIR. • Compositional stoichiometry was confirmed by EDAX analysis. • Magnetic parameters were measured by the pulse field hysteresis loop technique.

  7. K-BREF(Korean BAT reference document) development : BAT and BAT-AELs for large combustion plants and waste incinerators in Korea.

    Science.gov (United States)

    Yoo, Heungmin; Lee, Daegyun; Park, Jaehong

    2017-04-01

    Since the initial environmental policy namely "Regulation on assigning license for environmental pollutant emission facilities" was introduced in 1971, the previous environmental policy that assign licenses on emission facilities of each pollutant has been implementing in Korea. From this, economic standard and environmental quality of Korea are recognized as level of developed countries, even though various development activities for industrialization. However, amount of pollutant, emission route and emission source are increasing with development of various industries, and citizens recognition for environment have been changed as well. Thus, ministry of environment of Korea needs systematic policy based on scientific grounds for conversion of paradigm. For this, ministry of environment was introduced new policy namely "integrated pollution prevention and control(IPPC)", and it will be implemented from 2017 in Korea. IPPC is established for considering environment, economic and efficiency: 10 licenses on each pollutant emission will be integrated to one license, and it can be expected simplification for business licensing process. As well, this policy can be upgraded and processed while considering characteristics on location and industry types, in the future. However, to conduct this system harmoniously, policy demanders have to apply integrated control system to their facilities. Especially, the first applied industries by IPPC are two industries, such as large combustion plants for power generation and waste incineration facilities. Therefore, ministry of environment has to publish technical guideline books firstly for those industries, and they were named to "BAT reference document(BREF)". In this study, essential information for BREFs publishment, that is including emission levels, best available technique(BAT) and so on was investigated. In addition, the BAT-associated emission levels (BAT-AELs) of each industry were set using emission data obtained from

  8. Focusing millimeter wave radar for radial gap measurements in power plant combustion turbines; Fokussierendes Radarverfahren im Millimeterwellenbereich zur Radialspaltmessung in Kraftwerksturbinen

    Energy Technology Data Exchange (ETDEWEB)

    Schicht, Andreas

    2011-07-11

    In this work a method for spatially resolved radial gap measurements in power plant combustion turbines by means of an autofocusing imaging radar technique in the millimeter wave range was developed and verified experimentally. The radial gap measurement has been subject of engineering studies for many years, as a reliable, simple solution does not seem to be possible due to the given boundary conditions. These include on the one hand the adverse measurement conditions such as high temperature and pressure, corrosive atmosphere and high speed of motion. On the other hand, the geometrical structure of the rotor blades at their tips turns out to be a key problem for the distance measurement. In particular, the blade tip is composed of small extended portions forming thin ribs of only a few millimeters width. Many established distance sensors like e. g. capacitive sensors cannot detect the correct tip clearance of the blade edge independently from other structures on the blade end only due to their large surface area and thus their lack of spatial resolution. The problem of small structure sizes is overcome by choosing a synthetic aperture radar (SAR) in the millimeter wave range capable of resolving the edges of a typical blade tip. The clearance is determined by measuring the reflection at the blade tip while passing by the antenna, subsequently focusing the data by means of a matched filter operation and interpreting the phase of the blade edge reflection according to the CW radar principle. For this, an autofocus approach was developed, which provides an estimate of the clearance as a first result, which is utilized to overcome the phase ambiguity and thus to increase the measurement range. The autofocus algorithm applies a weighted phase gradient of the point-like blade edge reflection as cost function and sensitive indicator for the focal quality.

  9. Method and apparatus for optimizing operation of a power generating plant using artificial intelligence techniques

    Science.gov (United States)

    Wroblewski, David; Katrompas, Alexander M.; Parikh, Neel J.

    2009-09-01

    A method and apparatus for optimizing the operation of a power generating plant using artificial intelligence techniques. One or more decisions D are determined for at least one consecutive time increment, where at least one of the decisions D is associated with a discrete variable for the operation of a power plant device in the power generating plant. In an illustrated embodiment, the power plant device is a soot cleaning device associated with a boiler.

  10. Effect on Particulate and Gas Emissions by Combusting Biodiesel Blend Fuels Made from Different Plant Oil Feedstocks in a Liquid Fuel Burner

    Directory of Open Access Journals (Sweden)

    Norwazan Abdul Rahim

    2016-08-01

    Full Text Available This paper focuses on the combustion performance of various blends of biodiesel fuels and diesel fuel from lean to rich mixtures. The biodiesel blend fuel combustion experiments were carried out using a liquid fuel burner and biodiesel fuel made from various plant oil feedstocks, including jatropha, palm and coconut oils. The results show that jatropha oil methyl ester blend 25 (JOME B25 and coconut oil methyl ester blend 25 (COME B25 blended at 25% by volume in diesel fuel produced lower carbon monoxide (CO and unburned hydrocarbon (UHC emissions due to more complete combustion. Overall, JOME B25 had the highest CO emission reduction, at about 42.25%, followed by COME B25 at 26.44% emission reduction relative to pure diesel fuel. By contrast, the palm oil methyl ester blend 25 (POME B25 showed a 48.44% increase in these emissions. The results showed that the nitrogen oxides (NOx emissions were slightly higher for all biodiesel blend fuels compared with pure diesel fuel combustion. In case of sulphur dioxide (SO2 and UHC emissions, all biodiesel blends fuels have significantly reduced emissions. In the case of SO2 emission, the POME B25, JOME B25 and COME B25 emissions were reduced 14.62%, 14.45% and 21.39%, respectively, relative to SO2 emission from combusting pure diesel fuel. UHC emissions of POME B25, JOME B25 and COME B25 showed 51%, 71% and 70% reductions, respectively, compared to diesel fuel. The conclusion from the results is that all the biodiesel blend fuels are suitable and can be recommended for use in liquid fuel burners in order to get better and ‘greener’ environmental outcomes.

  11. Utilization of {gamma}-irradiation technique on plant mutation breeding and plant growth regulation in Tokyo Metropolitan Isotope Research Center

    Energy Technology Data Exchange (ETDEWEB)

    Suda, Hirokatsu [Tokyo Metropolitan Isotope Research Center (Japan)

    1997-03-01

    During about 30-years, we have developed {gamma}-irradiation technique and breeding back pruning method for the study of mutation breeding of ornamental plants. As a result, we have made a wide variety of new mutant lines in chrysanthemum, narcissus, begonia rex, begonia iron cross, winter daphne, zelkova, sweet-scented oleander, abelia, kobus, and have obtained 7 plant patents. By the use of {gamma}-irradiation to plant mutation breeding, we often observed that plants irradiated by low dose of {gamma}-rays showed superior or inferior growth than the of non-irradiated plants. Now, we established the irradiation conditions of {gamma}-rays for mutation breeding and growth of regulation in narcissus, tulip, Enkianthus perulatus Schneid., komatsuna, moyashi, african violet. In most cases, irradiation dose rate is suggested to be a more important factor to induce plant growth regulators than irradiation dose. (author)

  12. Current situation regarding the co-combustion of waste materials in power plants; Aktuelle Situation der Mitverbrennung von Abfallstoffen in Kraftwerken

    Energy Technology Data Exchange (ETDEWEB)

    Schirmer, U.; Krueger, H.; Puch, K.H. [VGB Technische Vereinigung der Grosskraftwerksbetreiber e.V., Essen (Germany)

    1998-09-01

    In view of the wholly insufficient capacity, relative to current arisings, of waste incineration plants, residue processing plants and plants for the utilisation of other combustible materials we are inevitably faced with the question whether power plant furnaces might not be suited for the thermal treatment and utilisation of wastes and residues. This possibility has been studied by many VGB member companies and seriously investigated for its practicability in several cases. The investigations were premised on the following fundamental positions. The VGB members are prepared to contribute to the solution of the above problems as long as this is possible without detriment to their duties as energy suppliers. They can only assume this responsibility if the requirements of the licensing laws are observed. This concerns the quality and arising quantities of wastes to be taken in, emissions, and the disposal of combustion residues. Power plants typically make more or less complete use of their own process residues, a feature which as far as possible should not be impaired by the co-combustion process. The technical problems posed by the co-combustion of suitable residues and wastes are usually solvable. Co-combustion offers an alternative and a supplement to dedicated waste utilisation plants or plants for the utilisation of suitable residues. Beyond this some companies are interested in profiting from the fees that will be due to them for utilising wastes. From 1990 to 1992 a VGB working group studied the option of co-combustion on the basis of the above premises. The material elaborated by the group now in turn serves as a basis for the following deliberations. [Deutsch] Da die Kapazitaet der Abfallverbrennungsanlagen, der Anlagen zur Reststoffverwertung und der Anlagen zur Nutzung sonstiger brennbaren Stoffe fuer das vorhandene Angebot bei weitem nicht ausreicht, ergibt sich die Frage der Eignung von Kraftwerksfeuerungen zur thermischen Behandlung und Verwertung von

  13. Classroom Techniques to Illustrate Water Transport in Plants

    Science.gov (United States)

    Lakrim, Mohamed

    2013-01-01

    The transport of water in plants is among the most difficult and challenging concepts to explain to students. It is even more difficult for students enrolled in an introductory general biology course. An easy approach is needed to demonstrate this complex concept. I describe visual and pedagogical examples that can be performed quickly and easily…

  14. Micropropagation and cryopreservation: alternative techniques for conserving plant genetic resources

    Science.gov (United States)

    Genetic resources of vegetatively propagated crops are maintained as growing plants and are often at risk of loss from disease, and environmental hazards. Micropropagation and cryopreservation are used for backup of the temperate fruit, nut and specialty crops held at the National Clonal Germplasm R...

  15. Classroom Techniques to Illustrate Water Transport in Plants

    Science.gov (United States)

    Lakrim, Mohamed

    2013-01-01

    The transport of water in plants is among the most difficult and challenging concepts to explain to students. It is even more difficult for students enrolled in an introductory general biology course. An easy approach is needed to demonstrate this complex concept. I describe visual and pedagogical examples that can be performed quickly and easily…

  16. 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide emissions from coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    Sorge, J.N. [Southern Co. Services, Inc., Birmingham, AL (United States); Menzies, B. [Radian Corp., Austin, TX (United States); Smouse, S.M. [USDOE Pittsburgh Energy Technology Center, PA (United States); Stallings, J.W. [Electric Power Research Inst., Palo Alto, CA (United States)

    1995-09-01

    Technology project demonstrating advanced wall-fired combustion techniques for the reduction of nitrogen oxide NOx emissions from coal-fired boilers. The primary objective of the demonstration is to determine the long-term NOx reduction performance of advanced overfire air (AOFA), low NOx burners (LNB), and advanced digital control/optimization methodologies applied in a stepwise fashion to a 500 MW boiler. The focus of this paper is to report (1) on the installation of three on-line carbon-in-ash monitors and (2) the design and results to date from the advanced digital control/optimization phase of the project.

  17. Environmental Performance of Hypothetical Canadian Pre-Combustion Carbon Dioxide Capture Processes Using Life-Cycle Techniques

    Directory of Open Access Journals (Sweden)

    Lakkana Piewkhaow

    2016-03-01

    Full Text Available The methodology of life-cycle assessment was applied in order to evaluate the environmental performance of a hypothetical Saskatchewan lignite-fueled Integrated Gasification Combined Cycle (IGCC electricity generation, with and without pre-combustion carbon dioxide (CO2 capture from a full life-cycle perspective. The emphasis here is placed on environmental performance associated with air contaminants of the comparison between IGCC systems (with and without CO2 capture and a competing lignite pulverized coal-fired electricity generating station in order to reveal which technology offers the most positive environmental effects. Moreover, ambient air pollutant modeling was also conducted by using American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD air dispersion modeling to determine the ground-level concentration of pollutants emitted from four different electricity generating stations. This study assumes that all stations are located close to Estevan. The results showed a significant reduction in greenhouse gas (GHG emissions and acidification potential by applying both post-combustion and pre-combustion CO2 capture processes. The GHG emissions were found to have reduced by 27%–86%, and IGCC systems were found to compare favorably to pulverized coal systems. However, in other environmental impact categories, there are multiple environmental trade-offs depending on the capture technology used. In the case of post-combustion capture, it was observed that the environmental impact category of eutrophication potential, summer smog, and ozone depletion increased due to the application of the CO2 capture process and the surface mining coal operation. IGCC systems, on the other hand, showed the same tendency as the conventional coal-fired electricity generation systems, but to a lesser degree. This is because the IGCC system is a cleaner technology that produces lower pollutant emission levels than the electricity

  18. Development of plant mutation techniques using ion beam

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Si Yong; Park, In Sook; Song, Hi Sup; Kim, Dong Sub; Kim, Soo Yeon

    2006-06-15

    It has been reported that ion beam with high liner energy transfer (LET) show relative high biological effectiveness (RBE) and more effective for induced plant mutation than low LET radiation i.e., X-rays, gamma rays and electrons. This study was conducted to induce mutation of in vitro cultured orchid and Chrysanthemum using proton beam of the MC-50 cyclotron (50 MeV) at the Korea Institute of Radiological and Medical Science. In vitro cultured stems of chrysanthemum(cv. Migok) and protocom-like bodies(PLBs) of Dendrobium orchid (cv. Kingianum) placed in the plastic petridish (5.5cm in diameter) with agar medium were irradiated by the proton beam with various dose ranges of 10, 25, 50, 100 Gy under the condition of 5nA beam current. Those irradiated plants were transferred to subculture media and then investigated growth characteristics. Shoot growth of chrysanthemum and orchid was decreased by increase of irradiation dose. In particular, new shoot formation was hardly founded over 50Gy in chrysanthemum and 100 Gy in orchid. Some leaf mutants were observed at the 25 Gy and 50 Gy irradiated PLBs of the orchid. The dry seeds of hot pepper, rapeseed, rice and perilla also were irradiated with proton beam of MC-50 cyclotron and then measured germination rate and early growth of M1 plants compared with gamma ray irradiation.

  19. Long term analysis of the biomass content in the feed of a waste-to-energy plant with oxygen-enriched combustion air.

    Science.gov (United States)

    Fellner, Johann; Cencic, Oliver; Zellinger, Günter; Rechberger, Helmut

    2011-10-01

    Thermal utilization of municipal solid waste and commercial wastes has become of increasing importance in European waste management. As waste materials are generally composed of fossil and biogenic materials, a part of the energy generated can be considered as renewable and is thus subsidized in some European countries. Analogously, CO(2) emissions of waste incinerators are only partly accounted for in greenhouse gas inventories. A novel approach for determining these fractions is the so-called balance method. In the present study, the implementation of the balance method on a waste-to-energy plant using oxygen-enriched combustion air was investigated. The findings of the 4-year application indicate on the one hand the general applicability and robustness of the method, and on the other hand the importance of reliable monitoring data. In particular, measured volume flows of the flue gas and the oxygen-enriched combustion air as well as corresponding O(2) and CO(2) contents should regularly be validated. The fraction of renewable (biogenic) energy generated throughout the investigated period amounted to between 27 and 66% for weekly averages, thereby denoting the variation in waste composition over time. The average emission factor of the plant was approximately 45 g CO(2) MJ(-1) energy input or 450 g CO(2) kg(-1) waste incinerated. The maximum error of the final result was about 16% (relative error), which was well above the error (<8%) of the balance method for plants with conventional oxygen supply.

  20. Efficient Plant Supervision Strategy Using NN Based Techniques

    Science.gov (United States)

    Garcia, Ramon Ferreiro; Rolle, Jose Luis Calvo; Castelo, Francisco Javier Perez

    Most of non-linear type one and type two control systems suffers from lack of detectability when model based techniques are applied on FDI (fault detection and isolation) tasks. In general, all types of processes suffer from lack of detectability also due to the ambiguity to discriminate the process, sensors and actuators in order to isolate any given fault. This work deals with a strategy to detect and isolate faults which include massive neural networks based functional approximation procedures associated to recursive rule based techniques applied to a parity space approach.

  1. Novel techniques and findings in the study of plant microbiota: search for plant probiotics.

    Science.gov (United States)

    Berlec, Aleš

    2012-09-01

    Plants live in intimate relationships with numerous microorganisms present inside or outside plant tissues. The plant exterior provides two distinct ecosystems, the rhizosphere (below ground) and the phyllosphere (above ground), both populated by microbial communities. Most studies on plant microbiota deal with pathogens or mutualists. This review focuses on plant commensal bacteria, which could represent a rich source of bacteria beneficial to plants, alternatively termed plant probiotics. Plant commensal bacteria have been addressed only recently with culture-independent studies. These use next-generation sequencing, DNA microarray technologies and proteomics to decipher microbial community composition and function. Diverse bacterial populations are described in both rhizosphere and phyllosphere of different plants. The microorganisms can emerge from neighboring environmental ecosystems at random; however their survival is regulated by the plant. Influences from the environment, such as pesticides, farming practice and atmosphere, also affect the composition of microbial communities. Apart from community composition studies, some functional studies have also been performed. These include identification of broad-substrate surface receptors and methanol utilization enzymes by the proteomic approach, as well as identification of bacterial species that are important mediators of disease-suppressive soil phenomenon. Experience from more advanced human microbial studies could provide useful information and is discussed in the context of methodology and common trends. Administration of microbial mixtures of whole communities, rather than individual species, is highlighted and should be considered in future agricultural applications. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

  2. Combustion gas from biomass - innovative plant concepts on the basis of circulating fluidized bed gasification; Brenngas aus Biomasse - innovative Anlagenkonzepte auf Basis der Zirkulierenden Wirbelschichtvergasung

    Energy Technology Data Exchange (ETDEWEB)

    Greil, C.; Hirschfelder, H. [Lurgi Umwelt GmbH, Frankfurt am Main (Germany)

    1998-09-01

    The contribution describes the applications of the Lurgi-ZWS gas generator. There are three main fields of application: Direct feeding of combustion gas, e.g. into a rotary kiln, as a substitute for coal or oil, without either dust filtering or gas purification. - Feeding of the combustion gas into the steam generator of a coal power plant after dust filtering and, if necessar, filtering of NH{sub 3} or H{sub 2}S. - Combustion in a gas turbine or gas engine after gas purification according to specifications. The applications are described for several exemplary projects. (orig./SR) [Deutsch] Im folgenden wird ueber die Anwendung des Lurgi-ZWS-Gaserzeugers berichtet. Nach heutiger Sicht stehen drei Anwendungsgebiete im Vordergrund: - direkte Einspeisung des Brenngases in z.B. einen Zementdrehrohrofen zur Substitution von Kohle oder Oel, ohne Entstaubung und Gasreinigung. - Einspeisung des Brenngases nach Entstaubung und gegebenenfalls Entfernung weiterer Komponenten wie NH{sub 3} oder H{sub 2}S in den Dampferzeuger eines Kohlekraftwerkes - Einsatz des Brenngases in einer Gasturbine oder Gasmotor nach spezifikationsgerechter Gasreinigung. Die aufgefuehrten Einsatzmoeglichkeiten werden am Beispiel von Projekten beschrieben. (orig./SR)

  3. Combustion control and model based optimization. Modeling of combustion process and development of supporting control systems for plant operation; Palamisprosessin saeaetoe ja mallipohjainen optimointi; Voimalaitoksen polttoprosessin mallitus ja saeaetoe sekae operoinnin tukiohjelmien kehitys ja testaus

    Energy Technology Data Exchange (ETDEWEB)

    Kortela, U.; Mononen, J.; Leppaekoski, K.; Hiltunen, J.; Jouppila, M.; Karppinen, R. [Oulu Univ. (Finland). Systems Engineering Lab.

    1997-10-01

    The aims of the project are to develop the combustion control strategies and to minimize the flue gas emissions. The common goal of the studies has been the reduction of flue gas emissions by using advanced control and optimization methods. The behaviour of different kind of boilers and fuels has been modelled using experimental data from fullscale plants, such as a 42 MW bubbling fluidized bed boiler, 23 MW bubbling fluidized bed boiler and a 300 MW circulating fluidized bed boiler. Many of the individual observations and modelled correlations between control variables and flue gas emissions have lead to operation instructions and/or re-organized control schemes which help to control total emissions. The most part of this knowledge can be formed to the standard IF- THEN - type rules which contain some uncertainty or fuzziness. Rule-based instruction system for the reduction of flue gas emissions is under work. (orig.)

  4. Combustion of coffee husks

    Energy Technology Data Exchange (ETDEWEB)

    Saenger, M.; Hartge, E.-U.; Werther, J. [Technical Univ. Hamburg-Harburg, Chemical Engineering 1, Hamburg (Germany); Ogada, T.; Siagi, Z. [Moi Univ., Dept. of Production Engineering, Eldoret (Kenya)

    2001-05-01

    Combustion mechanisms of two types of coffee husks have been studied using single particle combustion techniques as well as combustion in a pilot-scale fluidized bed facility (FBC), 150 mm in diameter and 9 m high. Through measurements of weight-loss and particle temperatures, the processes of drying, devolatilization and combustion of coffee husks were studied. Axial temperature profiles in the FBC were also measured during stationary combustion conditions to analyse the location of volatile release and combustion as a function of fuel feeding mode. Finally the problems of ash sintering were analysed. The results showed that devolatilization of coffee husks (65-72% volatile matter, raw mass) starts at a low temperature range of 170-200degC and takes place rapidly. During fuel feeding using a non water-cooled system, pyrolysis of the husks took place in the feeder tube leading to blockage and non-uniform fuel flow. Measurements of axial temperature profiles showed that during under-bed feeding, the bed and freeboard temperatures were more or less the same, whereas for over-bed feeding, freeboard temperatures were much higher, indicating significant combustion of the volatiles in the freeboard. A major problem observed during the combustion of coffee husks was ash sintering and bed agglomeration. This is due to the low melting temperature of the ash, which is attributed to the high contents of K{sub 2}O (36-38%) of the coffee husks. (Author)

  5. Advances in molecular marker techniques and their applications in plant sciences.

    Science.gov (United States)

    Agarwal, Milee; Shrivastava, Neeta; Padh, Harish

    2008-04-01

    Detection and analysis of genetic variation can help us to understand the molecular basis of various biological phenomena in plants. Since the entire plant kingdom cannot be covered under sequencing projects, molecular markers and their correlation to phenotypes provide us with requisite landmarks for elucidation of genetic variation. Genetic or DNA based marker techniques such as RFLP (restriction fragment length polymorphism), RAPD (random amplified polymorphic DNA), SSR (simple sequence repeats) and AFLP (amplified fragment length polymorphism) are routinely being used in ecological, evolutionary, taxonomical, phylogenic and genetic studies of plant sciences. These techniques are well established and their advantages as well as limitations have been realized. In recent years, a new class of advanced techniques has emerged, primarily derived from combination of earlier basic techniques. Advanced marker techniques tend to amalgamate advantageous features of several basic techniques. The newer methods also incorporate modifications in the methodology of basic techniques to increase the sensitivity and resolution to detect genetic discontinuity and distinctiveness. The advanced marker techniques also utilize newer class of DNA elements such as retrotransposons, mitochondrial and chloroplast based microsatellites, thereby revealing genetic variation through increased genome coverage. Techniques such as RAPD and AFLP are also being applied to cDNA-based templates to study patterns of gene expression and uncover the genetic basis of biological responses. The review details account of techniques used in identification of markers and their applicability in plant sciences.

  6. Mathematical optimization techniques for managing selective catalytic reduction for a fleet of coal-fired power plants

    Science.gov (United States)

    Alanis Pena, Antonio Alejandro

    Major commercial electricity generation is done by burning fossil fuels out of which coal-fired power plants produce a substantial quantity of electricity worldwide. The United States has large reserves of coal, and it is cheaply available, making it a good choice for the generation of electricity on a large scale. However, one major problem associated with using coal for combustion is that it produces a group of pollutants known as nitrogen oxides (NO x). NOx are strong oxidizers and contribute to ozone formation and respiratory illness. The Environmental Protection Agency (EPA) regulates the quantity of NOx emitted to the atmosphere in the United States. One technique coal-fired power plants use to reduce NOx emissions is Selective Catalytic Reduction (SCR). SCR uses layers of catalyst that need to be added or changed to maintain the required performance. Power plants do add or change catalyst layers during temporary shutdowns, but it is expensive. However, many companies do not have only one power plant, but instead they can have a fleet of coal-fired power plants. A fleet of power plants can use EPA cap and trade programs to have an outlet NOx emission below the allowances for the fleet. For that reason, the main aim of this research is to develop an SCR management mathematical optimization methods that, with a given set of scheduled outages for a fleet of power plants, minimizes the total cost of the entire fleet of power plants and also maintain outlet NO x below the desired target for the entire fleet. We use a multi commodity network flow problem (MCFP) that creates edges that represent all the SCR catalyst layers for each plant. This MCFP is relaxed because it does not consider average daily NOx constraint, and it is solved by a binary integer program. After that, we add the average daily NOx constraint to the model with a schedule elimination constraint (MCFPwSEC). The MCFPwSEC eliminates, one by one, the solutions that do not satisfy the average daily

  7. Molecular hydrogen (H2) combustion emissions and their isotope (D/H) signatures from domestic heaters, diesel vehicle engines, waste incinerator plants, and biomass burning

    Science.gov (United States)

    Vollmer, M. K.; Walter, S.; Mohn, J.; Steinbacher, M.; Bond, S. W.; Röckmann, T.; Reimann, S.

    2012-07-01

    Molecular hydrogen (H2), its stable isotope signature (δD), and the key combustion parameters carbon monoxide (CO), carbon dioxide (CO2), and methane (CH4) were measured from various combustion processes. H2 in the exhaust of gas and oil-fired heaters and of waste incinerator plants was generally depleted compared to ambient intake air, while CO was significantly elevated. These findings contradict the often assumed co-occurring net H2 and CO emissions in combustion processes and suggest that previous H2 emissions from combustion may have been overestimated when scaled to CO emissions. For the gas and oil-fired heater exhausts, H2 and δD generally decrease with increasing CO2, from ambient values of ~0.5 ppm and +130‰ to 0.2 ppm and -206‰, respectively. These results are interpreted as a combination of an isotopically light H2 source from fossil fuel combustion and a D/H kinetic isotope fractionation of hydrogen in the advected ambient air during its partial removal during combustion. Diesel exhaust measurements from dynamometer test stand driving cycles show elevated H2 and CO emissions during cold-start and some acceleration phases. While H2 and CO emissions from diesel vehicles are known to be significantly less than those from gasoline vehicles (on a fuel-energy base), we find that their molar H2/CO ratios (median 0.026, interpercentile range 0.12) are also significantly less compared to gasoline vehicle exhaust. Using H2/CO emission ratios, along with CO global emission inventories, we estimate global H2 emissions for 2000, 2005, and 2010. For road transportation (gasoline and diesel), we calculate 8.3 ± 2.2 Tg, 6.0 ± 1.5 Tg, and 3.8 ± 0.94 Tg, respectively, whereas the contribution from diesel vehicles is low (0.9-1.4%). Other fossil fuel emissions are believed to be negligible but H2 emissions from coal combustion are unknown. For residential (domestic) emissions, which are likely dominated by biofuel combustion, emissions for the same years are

  8. SVM and ANN Based Classification of Plant Diseases Using Feature Reduction Technique

    OpenAIRE

    Pujari, Jagadeesh D.; Rajesh Yakkundimath; Abdulmunaf. Syedhusain. Byadgi

    2016-01-01

    Computers have been used for mechanization and automation in different applications of agriculture/horticulture. The critical decision on the agricultural yield and plant protection is done with the development of expert system (decision support system) using computer vision techniques. One of the areas considered in the present work is the processing of images of plant diseases affecting agriculture/horticulture crops. The first symptoms of plant disease have to be correctly detected, identi...

  9. 77 FR 24228 - Condition Monitoring Techniques for Electric Cables Used in Nuclear Power Plants

    Science.gov (United States)

    2012-04-23

    ...The U.S. Nuclear Regulatory Commission (NRC or the Commission) is issuing a new guide regulatory guide, (RG) 1.218, ``Condition Monitoring Techniques for Electric Cables Used in Nuclear Power Plants.'' This guide describes techniques that the staff of the NRC considers acceptable for condition monitoring of electric cables for nuclear power plants. RG 1.218 is not intended to be prescriptive,......

  10. Application of Multivariable Statistical Techniques in Plant-wide WWTP Control Strategies Analysis

    DEFF Research Database (Denmark)

    Flores Alsina, Xavier; Comas, J.; Rodríguez-Roda, I.

    2007-01-01

    The main objective of this paper is to present the application of selected multivariable statistical techniques in plant-wide wastewater treatment plant (WWTP) control strategies analysis. In this study, cluster analysis (CA), principal component analysis/factor analysis (PCA/FA) and discriminant...

  11. Heating plants. Comparison between the main available techniques that allow heating plants to respect the new regulations; Les chaudieres. Comparaison des principales techniques disponibles permettant aux chaudieres de respecter les nouvelles reglementations

    Energy Technology Data Exchange (ETDEWEB)

    Bouju, J.L. [Babcock Entreprise, 93 - La Courneuve (France)

    1997-12-31

    This paper gives an overview of the main methods available today to improve the thermal and environmental performances of heating plants and burners and points out the technical and economical advantages and drawbacks of these methods. The methods are described according to the type of pollutant: SO{sub x} (fuel treatment, smokes desulfurization, in-situ desulfurizers injection, lime treatment of solid and liquid fuels), NO{sub x} (smokes recycling, low-NO{sub x} burners, air staging, over-dimensioning of combustion chambers, reduction of combustion air temperature, re-burning, denitrifier injection, combination of several methods), dusts (filters and cyclones). (J.S.)

  12. 蓄热式燃烧技术的开发与应用%Development and Applications of Regenerative Combustion Technique

    Institute of Scientific and Technical Information of China (English)

    杨柏松; 李运城

    2001-01-01

    In this paper,the regenerative combustion technique particulaly used for low caloric gases,such as BFG is described,also the technical features of the regenerative reheat furnace analyzed.It is sure that the technique will provide a historic opportunity of further energy-saving and enoironment protection to our industries.%对蓄热式燃烧技术的开发进行了介绍,分析了蓄热式加热炉的技术特点,认为蓄热式燃烧技术为我国工业界大幅度节能和环境保护提供了一次历史机会。

  13. Essais préliminaires de combustion d'asphaltes par la technique du charbon pulvérisé Preliminary Tests of Asphalt Combustion by the Pulverized Coal Technique

    Directory of Open Access Journals (Sweden)

    Flament G.

    2006-11-01

    Full Text Available Les possibilités offertes par le procédé de désasphaltage étudié à L'Institut Français du Pétrole (IFP sont rapidement exposées. On montre en particulier que les asphaltes recueillis grâce à ce procédé ont des propriétés physiques telles, qu'il est possible de s'en servir comme combustible et donc de les valoriser sur le plan énergétique. The possibilities offered by the deasphalting process researched by Institut Français du Pétrole (IFP are briefly described. It is shown in particular that the types of asphalts gathered by means of this process have physical properties enabling them to be used as a fuel so that they can be upgraded from the energy standpoint.

  14. Essais préliminaires de combustion d'asphaltes par la technique du charbon pulvérisé Preliminary Tests of Asphalt Combustion by the Pulverized Coal Technique

    OpenAIRE

    Flament G.; Mauss F.

    2006-01-01

    Les possibilités offertes par le procédé de désasphaltage étudié à L'Institut Français du Pétrole (IFP) sont rapidement exposées. On montre en particulier que les asphaltes recueillis grâce à ce procédé ont des propriétés physiques telles, qu'il est possible de s'en servir comme combustible et donc de les valoriser sur le plan énergétique. The possibilities offered by the deasphalting process researched by Institut Français du Pétrole (IFP) are briefly described. It is shown in particular ...

  15. Field study of a Brownian Demister Unit to reduce aerosol based emission from a Post Combustion CO2 Capture plant

    NARCIS (Netherlands)

    Khakharia, P.M.; Kvamsdal, H.M.; Da Silva, E.F.; Vlugt, T.J.H.; Goetheer, E.L.V.

    2014-01-01

    Emission of solvent and its degradation products from a typical absorption-desorption based Post Combustion CO2 Capture (PCCC) process is inevitable and thus, an area of growing concern. Recently, it has been pointed out that emissions can also occur by means of aerosol droplets. Conventional counte

  16. A simple technique for removing plant polysaccharide contaminants from DNA.

    Science.gov (United States)

    Do, N; Adams, R P

    1991-02-01

    A survey of the inhibitory effects of various plant polysaccharides on DNA restrictions (HindIII and EcoRI) revealed that neutral polysaccharides (arabino-galactan, dextran, gum guar, gum locust bean, beta-glucan, inulin, laminaran, mannan and starch) were not very inhibitory. In contrast, acidic polysaccharides (carrageenan, dextran sulfate, gum ghatti, gum karaya, pectin and xylan) were very inhibitory, even at low concentrations. The Elutip-d (RPC-5 type resin) was evaluated for removal of the inhibitory polysaccharides. Used alone or in combination with a phenol/chloroform wash, it proved effective in removing the polysaccharide so that HindIII digestion was possible, except in the cases of carrageenan and dextran sulfate. In addition, the genomic DNA extracts from live oak (Quercus virginiana) and magnolia (Magnolia grandiflora) were sufficiently purified so that the DNAs could be restricted with both EcoRI and HindIII.

  17. Technical notes for the conceptual design for an atmospheric fluidized-bed direct combustion power generating plant. [Comparison of AFB plant and pulverized coal plant

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    The first part of this report presents a comparison of the conceptual designs of a large (570 MW(e)) pulverized coal (PC) steam generator equipped with a wet limestone flue gas desulfurization (FGD) system and two equivalent sized atmospheric fluidized bed (AFB) steam generators including balance of plants for electric-power generation. The reader is cautioned that this portion of the report compares a zero generation AFB technology to pulverized coal technology which has been operationally and economically optimized for the past half-century. This comparison is intended to be indicative of whether further development of the AFB concept as a viable alternative to the PC/FGD concept for electric-power generation is merited. In the second part, the load-following capability of a once-through subcritical atmospheric fluidized bed boiler is analyzed. Digital computer simulation predictions of the plant's response to open loop step changes in firing rate, feedwater flow, governor valve, unit load demand, etc, are made. The predicted response of throttle pressure, steam temperature, unit load, etc, are compared to the response of a conventional coal-fired, once-through, subcritical unit. The load-following capability is assessed through this qualitative comparison. Additional model response predictions are also presented for which no test data are presently available.

  18. Precise plant breeding using new genome editing techniques: opportunities, safety and regulation in the EU.

    Science.gov (United States)

    Hartung, Frank; Schiemann, Joachim

    2014-06-01

    Several new plant breeding techniques (NPBTs) have been developed during the last decade, and make it possible to precisely perform genome modifications in plants. The major problem, other than technical aspects, is the vagueness of regulation concerning these new techniques. Since the definition of eight NPBTs by a European expert group in 2007, there has been an ongoing debate on whether the resulting plants and their products are covered by GMO legislation. Obviously, cover by GMO legislation would severely hamper the use of NPBT, because genetically modified plants must pass a costly and time-consuming GMO approval procedure in the EU. In this review, we compare some of the NPBTs defined by the EU expert group with classical breeding techniques and conventional transgenic plants. The list of NPBTs may be shortened (or extended) during the international discussion process initiated by the Organization for Economic Co-operation and Development. From the scientific point of view, it may be argued that plants developed by NPBTs are often indistinguishable from classically bred plants and are not expected to possess higher risks for health and the environment. In light of the debate on the future regulation of NPBTs and the accumulated evidence on the biosafety of genetically modified plants that have been commercialized and risk-assessed worldwide, it may be suggested that plants modified by crop genetic improvement technologies, including genetic modification, NPBTs or other future techniques, should be evaluated according to the new trait and the resulting end product rather than the technique used to create the new plant variety.

  19. RESPONSE OF SELECTED LOCAL PLANTAIN CULTIVARS TO PIBS (PLANTS ISSUS DE BOURGEONS SECONDAIRES TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Beloved Mensah DZOMEKU

    2014-12-01

    Full Text Available One major constraint to plantain production has been inadequate healthy planting materials at the time of planting. Several technologies for multiplying healthy planting materials exist but could not meet farmers’ demand. A study was conducted to assess the performance of various landraces plantain to plants issus de bourgeons secondaires (PIBS technique. Five cultivars of Musa sapientum (Apantu (False Horn, Asamienu (True Horn, Oniaba (intermediate French plantain and FHIA-21 (tetraploid hybrid plantain were tested to determine their response to the PIBS technique. Sword suckers of each cultivar with weight of between 0.2-0.5 kg were prepared and buried in fine sawdust in a humidity chamber built using transparent polyethylene sheets. Results at harvest showed that removal of rooted sprouts started three weeks after planting and every week thereafter for eight weeks. The intermediate French plantain cultivar (Oniaba produced the least average number (about 20 of healthy planting. Apantu (False Horn produced an average of about 75 healthy planting materials. The hybrid FHIA-21 on the other hand generated an average of about 85 healthy planting materials. Asamienu (True Horn produced the highest healthy seedlings of about 90 healthy planting materials. The results revealed that the leaf scar carries a primary bud at the intersection of each leaf sheath and several eyes along the entire length of the leaf sheath which could not have developed into suckers. However, with this technique the eyes could be activated to sprout as healthy planting materials. The technique proved as an efficient method of multiplying healthy planting materials for plantain and could thus be recommended for adoption not only by peasant farmers but also to others who could become commercial seed producers. But there will be a need for certification guidelines for seed growing systems.

  20. Random amplified marker technique for plants rich in polyphenols.

    Science.gov (United States)

    Jhang, Tripta; Shasany, Ajit Kumar

    2012-01-01

    More than 10,000 publications using the random amplified polymorphic DNA (RAPD) or related arbitrary marker techniques have been published in two decades of its inception in 1990. Despite extensive use, RAPD technique has also attracted some criticisms, mainly for lack of reproducibility. In the light of its widespread applications, the objective of this chapter is to (1) provide a protocol for RAPD assay, (2) identify the potential factors affecting the optimization of the RAPD assays, and (3) provide proper statistical analysis to avoid false positives. It is suggested that after proper optimization, the RAPD is a reliable, sensitive, and reproducible assay having the potential to detect a wide range of DNA variations. Analyses of the relevant fragments generated in RAPD profile allow not only to identify some of the molecular events implicated in the genomic instability but also to discover genes playing key roles in genetic evolution and gene mapping. RAPD markers will continue to be boon for genetic studies of those organisms where yet no sequence information or scanty information is available.

  1. Life-assessment technique for nuclear power plant cables

    Science.gov (United States)

    Bartoníček, B.; Hnát, V.; Plaček, V.

    1998-06-01

    The condition of polymer-based cable material can be best characterized by measuring elongation at break of its insulating materials. However, it is not often possible to take sufficiently large samples for measurement with the tensile testing machine. The problem has been conveniently solved by utilizing differential scanning calorimetry technique. From the tested cable, several microsamples are taken and the oxidation induction time (OIT) is determined. For each cable which is subject to the assessment of the lifetime, the correlation of OIT with elongation at break and the correlation of elongation at break with the cable service time has to be performed. A reliable assessment of the cable lifetime depends on accuracy of these correlations. Consequently, synergistic effects well known at this time - dose rate effects and effects resulting from the different sequence of applying radiation and elevated temperature must be taken into account.

  2. computing techniques for production scheduling in Corrugator manufacturing plants

    Directory of Open Access Journals (Sweden)

    Germán A. Velásquez D.

    2007-01-01

    Full Text Available The corrugator scheduling problem is a difficult problem due to a wide variety of parameters and optimisation objectives that have to be accounted for and the relationships among them. Majority of solution techniques proposed so far only deal with minimizing either, the trim waste or pattern changes, this paper proposes a multi-objective evolutionary algorithm to optimize the WPL objective (weighted planning level and the cost objectives. Computational experiments were conducted and results were compared against the current shop scheduling method used at a real-life corrugator manufacturing facility. A series of experiments were also conducted to determine the evolutionary algorithm parameters. The improvement on performance metrics encourages us to actually implement the algorithm at the factory

  3. Engineering and Economic Analysis of an Advanced Ultra-Supercritical Pulverized Coal Power Plant with and without Post-Combustion Carbon Capture Task 7. Design and Economic Studies

    Energy Technology Data Exchange (ETDEWEB)

    Booras, George [Electric Power Research Inst. (EPRI), Palo Alto, CA (United States); Powers, J. [General Electric, Schenectady, NY (United States); Riley, C. [General Electric, Schenectady, NY (United States); Hendrix, H. [Hendrix Engineering Solutions, Inc., Calera, AL (United States)

    2015-09-01

    This report evaluates the economics and performance of two A-USC PC power plants; Case 1 is a conventionally configured A-USC PC power plant with superior emission controls, but without CO2 removal; and Case 2 adds a post-combustion carbon capture (PCC) system to the plant from Case 1, using the design and heat integration strategies from EPRI’s 2015 report, “Best Integrated Coal Plant.” The capture design basis for this case is “partial,” to meet EPA’s proposed New Source Performance Standard, which was initially proposed as 500 kg-CO2/MWh (gross) or 1100 lb-CO2/MWh (gross), but modified in August 2015 to 635 kg-CO2/MWh (gross) or 1400 lb-CO2/MWh (gross). This report draws upon the collective experience of consortium members, with EPRI and General Electric leading the study. General Electric provided the steam cycle analysis as well as v the steam turbine design and cost estimating. EPRI performed integrated plant performance analysis using EPRI’s PC Cost model.

  4. Synthesis of multifunctional nanostructured zinc-iron mixed oxide photocatalyst by a simple solution-combustion technique.

    Science.gov (United States)

    Pradhan, Gajendra Kumar; Martha, Satyabadi; Parida, K M

    2012-02-01

    A series of nanostructure zinc-iron mixed oxide photocatalysts have been fabricated by solution-combustion method using urea as the fuel, and nitrate salts of both iron and zinc as the metal source. Different characterization tools, such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), diffuse reflectance UV-visible spectra (DRUV-vis), electron microscopy, and photoelectrochemical measurement were employed to establish the structural, electronic, and optical properties of the material. Electron microscopy confirmed the nanostructure of the photocatalyst. The synthesized photocatalysts were examined towards photodegradation of 4-chloro-2-nitro phenol (CNP), rhodamine 6G (R6G), and photocatalytic hydrogen production under visible light (λ ≥ 400 nm). The photocatalyst having zinc to iron ratio of 50:50 showed best photocatalytic activity among all the synthesized photocatalysts.

  5. Development of a Raman spectroscopy technique to detect alternate transportation fuel hydrocarbon intermediates in complex combustion environments.

    Energy Technology Data Exchange (ETDEWEB)

    Ekoto, Isaac W.; Barlow, Robert S.

    2012-12-01

    Spontaneous Raman spectra for important hydrocarbon fuels and combustion intermediates were recorded over a range of low-to-moderate flame temperatures using the multiscalar measurement facility located at Sandia/CA. Recorded spectra were extrapolated to higher flame temperatures and then converted into empirical spectral libraries that can readily be incorporated into existing post-processing analysis models that account for crosstalk from overlapping hydrocarbon channel signal. Performance testing of the developed libraries and reduction methods was conducted through an examination of results from well-characterized laminar reference flames, and was found to provide good agreement. The diagnostic development allows for temporally and spatially resolved flame measurements of speciated hydrocarbon concentrations whose parent is more chemically complex than methane. Such data are needed to validate increasingly complex flame simulations.

  6. Voigt modelling of size–strain analysis: Application to -Al2O3 prepared by combustion technique

    Indian Academy of Sciences (India)

    K Santra; P Chatterjee; S P Sen Gupta

    2002-06-01

    A comprehensive analysis of size and strain broadened profile shapes in X-ray diffraction line broadening analysis is presented. Both size and strain broadened profiles were assumed to be Voigtian and the derived microstructural parameters (size and strain) were found to be in close agreement with those calculated from model independent Warren–Averbach method. The method is applied to three different alumina samples viz. micron size -alumina (-Al2O3) prepared by the combustion of aluminium nitrate and urea mixture, annealed samples and commercial -Al2O3 sample. It is likely from the present analysis that a significant Gaussian size contribution is related to narrow size distribution observed from the analysis. It has been concluded that present Voigtian analysis is more reliable and may largely replace the earlier simplified integral breadth methods of analysis often used in line broadening analysis.

  7. Innovative clean coal technology (ICCT): 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO sub x ) emissions from coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-13

    The major objectives of the project are to: (1) demonstrate the performance of three combustion NO{sub x} control technologies; (2) determine the short-term NO{sub x} emission trends for each of the operating configurations; (3) determine the dynamic long-term NO{sub x} emission characteristics for each of the operating configurations using sophisticated statistical techniques; (4) evaluate progressive cost-effectiveness (i.e., dollars per ton of NO{sub x} removed) of the low NO{sub x} combustion technologies tested; and (5) determine the effects on other combustion parameters (e.g., CO production, carbon carry-over, particulate characteristics) of applying the low NO{sub x} combustion technologies. (VC)

  8. Plant-Damage Assessment Technique for Evaluating Military Vehicular Impacts to Vegetation in the Mojave Desert

    Energy Technology Data Exchange (ETDEWEB)

    D. J. Hansen; W. K. Ostler

    2001-09-01

    A new plant damage assessment technique was developed by plant ecologists from Bechtel Nevada at the U.S. Department of Energy's National Security Administration Nevada Operations Office and funded by the Strategic Environmental Research and Development Program Project CS-1131 in cooperation with the U.S. Army's National Training Center (NTC) at Fort Irwin, California. The technique establishes linear transects the width of vehicle tracts from evidence of vehicle tracks in the soil (usually during a prior training rotation period of 30 days or since the last rain or wind storm), and measures vegetation within the tracks to determine the area of plant parts being run over, the percent of the impacted parts damaged, and the percent of impacted parts expected to recover. It documents prior-damage classes based on estimated of damage that plants have apparently experienced previously (as assessed from field indicators of damage such as plant shape and height). The technique was used to evaluate different vehicle types (rubber-tire wheels vs. tracks) in six area at the NTC with different soils and training intensity levels. The technique provides tabular data that can be sorted and queried to show a variety of trends related to military vehicular impacts. The technique also appears suitable for assessing other non-military off-road traffic impacts. Findings report: (1) differences in plant sensitivity of different vehicular impacts, (2) plant cover and density by species and training area, (3) the degree to which wheels have less impact than tracks, and (4) the mean percent survival is inversely proportional to the degree of prior damage received by the vegetation (i.e., plants previously impacted have lower survival than plants not previously impacted).

  9. Elemental imaging at the nanoscale: NanoSIMS and complementary techniques for element localisation in plants.

    Science.gov (United States)

    Moore, Katie L; Lombi, Enzo; Zhao, Fang-Jie; Grovenor, Chris R M

    2012-04-01

    The ability to locate and quantify elemental distributions in plants is crucial to understanding plant metabolisms, the mechanisms of uptake and transport of minerals and how plants cope with toxic elements or elemental deficiencies. High-resolution secondary ion mass spectrometry (SIMS) is emerging as an important technique for the analysis of biological material at the subcellular scale. This article reviews recent work using the CAMECA NanoSIMS to determine elemental distributions in plants. The NanoSIMS is able to map elemental distributions at high resolution, down to 50 nm, and can detect very low concentrations (milligrams per kilogram) for some elements. It is also capable of mapping almost all elements in the periodic table (from hydrogen to uranium) and can distinguish between stable isotopes, which allows the design of tracer experiments. In this review, particular focus is placed upon studying the same or similar specimens with both the NanoSIMS and a wide range of complementary techniques, showing how the advantages of each technique can be combined to provide a fuller data set to address complex scientific questions. Techniques covered include optical microscopy, synchrotron techniques, including X-ray fluorescence and X-ray absorption spectroscopy, transmission electron microscopy, electron probe microanalysis, particle-induced X-ray emission and inductively coupled plasma mass spectrometry. Some of the challenges associated with sample preparation of plant material for SIMS analysis, the artefacts and limitations of the technique and future trends are also discussed.

  10. Knowledge elicitation techniques and application to nuclear plant maintenance

    Science.gov (United States)

    Doyle, E. Kevin

    The new millennium has brought with it the opportunity of global trade which in turn requires the utmost in efficiency from each individual industry. This includes the nuclear power industry, a point which was emphasized when the electrical generation industry began to be de regulated across North America the late 1990s and re-emphasized when the northeast power grid of North America collapsed in the summer of 2003. This dissertation deals with reducing the cost of the maintenance function of Candu nuclear power plants and initiating a strong link between universities and the Canadian nuclear industry. Various forms of RCM (reliability-centred maintenance) have been the tools of choice in industry for improving the maintenance function during the last 20 years. In this project, pilot studies, conducted at Bruce Power between 1999 and 2005, and reported on in this dissertation, lay out a path to implement statistical improvements as the next step after RCM in reducing the cost of the maintenance. Elicitation protocols, designed for the age group being elicited, address the much-documented issue of a lack of data. Clear, graphical, inferential statistical interfaces are accentuated and developed to aid in building the teams required to implement the various methodologies and to help in achieving funding targets. Graphical analysis and Crow/AMSAA (army materials systems analysis activity) plots are developed and demonstrated from the point of view of justifying the expenditures of cost reduction efforts. This dissertation ultimately speaks to the great opportunity being presented by this approach at this time: of capturing the baby-boom generation's huge pool of knowledge before those people retire. It is expected that the protocols and procedures referenced here will have applicability across the many disciplines where collecting expert information from a similar age group is required.

  11. Development of pressurised fluidised bed combustion technique for coal-fired gas/steam processes; Entwicklung der Druckwirbelschicht-Feuerungstechnik fuer kohlegefeuerte Gas-Dampfprozesse

    Energy Technology Data Exchange (ETDEWEB)

    Pitt, R.; Steven, H.

    1992-12-31

    The investigations for the development of the pressurized fluidized bed technique have shown that it is possible, in principle, to keep within the emission limits with the steady state pressurised fluidised bed combustion, even at low part load. However, the construction expense is considerable and the type of coal and grain size must comply relatively exactly with the design values. Not every fuel is suitable for fluidised bed combustion regarding emission. The most important parameter for emission is the temperature profile for this component, which should be as even as possible at a high temperature level. A sufficient dwell time of the gas and the particles is decisive for CO emission, where a minimum reaction time is required for both phases. (orig.) [Deutsch] Die Untersuchungen zur Entwicklung der Druckwirbelschichttechnik haben gezeigt, dass es prinzipiell moeglich ist, mit der stationaeren druckaufgeladenen Wirbelschichtfeuerung die Emissionsgrenzwerte auch bei geringer Teillast einzuhalten, allerdings ist der bauliche Aufwand erheblich und auch die Kohleart und Koernung muessen relativ genau den Auslegungswerten entsprechen. Auch hinsichtlich der Emissionen ist nicht jeder Brennstoff fuer die Wirbelschichtfeuerung geeignet. Wichtigster Einflusspartner auf die Emission ist auch bei dieser Komponente das Temperaturprofil, das moeglichst gleichmaessig auf hohem Temperaturniveau liegen sollte. Ausreichende Verweilzeit des Gases und der Partikel sind fuer die CO-Emission entscheidend, wobei fuer beide Phasen eine Mindestreaktionszeit erforderlich ist. (orig.)

  12. Mathematical modelling and laser measurement technique of combustion processes. Final report 1994-1996; Mathematische Modellierung und Lasermesstechnik von Verbrennungsvorgaengen. Abschlussbericht 1994 - 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Due to financial boundary conditions and greater industrially orientated targets, the project was restructured in its third phase. The general theme `Mathematical modelling and laser measurement technique of combustion processes` was made more precise by the central questions of the Sub-heading `Modelling and validation`. It applies equally as target for the three part projects (a) Modelling process, (b) Standard flames (c) Coal and solid combustion, soot formation, radiation. Due to the preliminary work done, good progress was achieved in all projects, in some cases discoveries were made and new types of projects were developed. The quality and quantity of the basic data as input parameters for modelling and validation data as test parameters for the prediction of the models was expanded further by comparison of different methods of measurement. [Deutsch] Aufgrund der finanziellen Randbedingungen und der staerker industrieorientierten Zielsetzungen wurde das Projekt in seiner dritten Phase neu strukturiert. Das Generalthema `Mathematische Modellierung und Lasermesstechnik von Verbrennungsvorgaengen` wurde um die zentralen Fragestellungen als Zwischenueberschrift praezisiert: `Modellierung und Validierung`. Sie gilt fuer die drei Teilprojekt (a) Modellierungsverfahren (b) Standardflammen (c) Kohle- und Feststoffverbrennung, Russbildung, Strahlung in gleichem Mass als Zielsetzung. In allen Vorhaben konnten aufgrund der geleisteten Vorarbeit gute Fortschritte erzielt werden, in einigen Faellen Entdeckungen gemacht und neuartige Verfahren entwickelt werden. Die Qualitaet und Quantitaet der Basisdaten als Eingangsgroessen fuer die Modellierung und der Validierungsdaten als Testgroessen fuer die Voraussagen der Modelle konnten durch Vergleich unterschiedlicher Messmethoden generell weiter ausgebaut werden. (orig.)

  13. Impact of ignition temperature on particle size and magnetic properties of CoFe2O4 nanoparticles prepared by self-propagated MILD combustion technique

    Science.gov (United States)

    Kaliyamoorthy, Venkatesan; Rajan Babu, D.; Saminathan, Madeswaran

    2016-11-01

    We prepared nanocrystalline CoFe2O4 by changing its ignition temperatures, using moderate and intense low-oxygen dilution (MILD) combustion technique. The effect of ignition temperature on the particle size and its magnetic behavior was investigated by HR-TEM and VSM respectively. We observed a vast change in the structural behavior and the magnetic properties of the prepared samples. X-ray diffraction studies revealed that the resultant samples had single phase with different grain sizes from 23±5 nm to 16±5 nm, which was understood by observing the growth of the grains through heat released from the combustion reaction. FE-SEM analysis showed high porosity with heterogeneous distribution of the pore size based on the adiabatic temperature and EPMA analysis, which confirmed the elemental compositions of the prepared samples. The saturation magnetization values measured at room temperature, employing vibrating sample magnetometer (VSM) decreased gradually from 50 to 34 emu/g when the ignition temperature was increased from 243 °C to 400 °C. Some of Fe ions on the B sites moved periodically to the A sites because of quenching treatment. The presence of Fe2+ ions in the existing ferrite structure ruled the magnetic behavior of the sample, as confirmed by the Mössbauer analysis.

  14. State of the art review of radioactive waste volume reduction techniques for commercial nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-01

    A review is made of the state of the art of volume reduction techniques for low level liquid and solid radioactive wastes produced as a result of: (1) operation of commercial nuclear power plants, (2) storage of spent fuel in away-from-reactor facilities, and (3) decontamination/decommissioning of commercial nuclear power plants. The types of wastes and their chemical, physical, and radiological characteristics are identified. Methods used by industry for processing radioactive wastes are reviewed and compared to the new techniques for processing and reducing the volume of radioactive wastes. A detailed system description and report on operating experiences follow for each of the new volume reduction techniques. In addition, descriptions of volume reduction methods presently under development are provided. The Appendix records data collected during site surveys of vendor facilities and operating power plants. A Bibliography is provided for each of the various volume reduction techniques discussed in the report.

  15. Emission and combustion behaviour of a raw lignite-fired CFB steam generator with co-combustion of sewage sludge

    Energy Technology Data Exchange (ETDEWEB)

    Lambertz, J.; Thomas, G.; Bierbaum, K. [Rheinbraun AG, Koeln (Germany)

    1998-12-31

    The present recovery and disposal options for municipal sewage sludge are being seriously restricted and made costlier by new ordinances. This is true of both uses in agriculture and sewage sludge dumping. Against this background, thermal recycling is gaining more and more in importance as a long-term alternative, so that a substantial rise in combustion capacity is becoming necessary. Since sewage sludge drying and monocombustion are highly cost-intensive, it makes ecological and economic sense to use low-polluting combustion capacities at existing power plants for the co-combustion of municipal sewage sludge. In its processing plants Rheinbraun AG operates steam generators which work according to the circulating fluidized-bed (CFB) combustion principle. This low-polluting combustion technique is particularly suitable for fuels having high ash contents. In addition to the major fuel, viz. raw lignite (55-60% moisture content), minor portions of sewage sludge (70% moisture content) are burnt together with the lignite within the scope of this research project. In this process, a solids pump feeds the mechanically dewatered sewage sludge directly into the steam generator. The industrial-scale tests were carried out in the 2nd quarter of 1994. The operating behaviour remains almost unchanged. The influence of co-combustion on emissions corresponds to the range usual for pure lignite operation. 8 figs.

  16. Nitrous Oxide from Combustion and Industry: Chemistry, Emissions and Control Protoxyde d'azote provenant de la combustion et de l'industrie : chimie, émissions et techniques de réduction

    Directory of Open Access Journals (Sweden)

    De Soete G.

    2006-11-01

    ératures élevées. Les émissions des moteurs à combustion interne (moteurs diesel ainsi que moteurs à essence non contrôlés par des catalyseurs trois-voies dépendent de la richesse du mélange (fig. 28 ainsi que de la puissance fournie (fig. 29 et 30; des facteurs d'émission en g/km sont donnés pour les deux types de moteurs (tableaux 7 et 8. Les techniques d'abattement de NO dans les fumées et gaz d'échappement peuvent constituer une source d'accroissement des émissions de N2O non négligeable. En particulier c'est le cas des techniques de réduction sélective non catalytique (NCSR du NO par l'urée et l'acide cyanurique (fig. 31 et 32 et du traitement des gaz d'échappement des moteurs à allumage commandé par des catalyseurs trois-voies (fig. 33 ; dans ce dernier cas, le vieillissement progressif du catalyseur augmente sensiblement le protoxyde d'azote émis (figs. 34 et 35. Par rapport à la voiture sans catalyseur trois-voies, la présence du catalyseur neuf augmente l'émission de N2O par un facteur 3 à 5, tandis que la présence d'un catalyseur moyennement âgé la multiplie par un facteur 10 à 16 (tableaux 9 et 10. Les teneurs de protoxyde d'azote dans les effluves gazeux provenant de la fabrication de l'acide nitrique sont très élevées (300 à 1700 ppmv, tandis que les effluves en provenance des unités de production d'acide adipique (intermédiaire dans la fabrication du nylon peuvent contenir plusieurs dizaines de pour-cents de N2O. L'incinération de certains types de déchets, riche en azote (par exemple les sewage sludges, peuvent également être à l'origine d'émissions relativement importantes (tableau 11. Une Deuxième partie de l'article compare très brièvement ces données actuelles sur les émissions de N2O aux facteurs d'émission présentés dans le Rapport OCDE/IPPC d'août 1991, pour constater que, à part le fait que l'inventaire de ce Rapport présente bien des lacunes, certaines données pourraient encore être contamin

  17. Gasification techniques and fluidized-bed gasification of biomass - ways of optimising combustion and energy utilisation. Vergasungstechniken und Wirbelschichtvergasung von Biomasse - Wege zur Optimierung der Verbrennung und der Energienutzung

    Energy Technology Data Exchange (ETDEWEB)

    Brunner, W. (Wamsler Umwelttechnik, Muenchen (Germany))

    1994-01-01

    To date, electricity can only be generated from biomass via steam production. There are no gasification techniques available for generating electricity from biomass at an industrial scale. The paper describes the current stage of development and two possible applications of a gasification technique whose attractivity lies not only in direct electricity production and utilisation of residual heat (block-type thermal power station). The gasification is also a way of compensating the drawbacks of solid fuel combustion compared with gas combustion. (orig./EF)

  18. Application of X-ray fluorescence analytical techniques in phytoremediation and plant biology studies

    Science.gov (United States)

    Nečemer, Marijan; Kump, Peter; Ščančar, Janez; Jaćimović, Radojko; Simčič, Jurij; Pelicon, Primož; Budnar, Miloš; Jeran, Zvonka; Pongrac, Paula; Regvar, Marjana; Vogel-Mikuš, Katarina

    2008-11-01

    Phytoremediation is an emerging technology that employs the use of higher plants for the clean-up of contaminated environments. Progress in the field is however handicapped by limited knowledge of the biological processes involved in plant metal uptake, translocation, tolerance and plant-microbe-soil interactions; therefore a better understanding of the basic biological mechanisms involved in plant/microbe/soil/contaminant interactions would allow further optimization of phytoremediation technologies. In view of the needs of global environmental protection, it is important that in phytoremediation and plant biology studies the analytical procedures for elemental determination in plant tissues and soil should be fast and cheap, with simple sample preparation, and of adequate accuracy and reproducibility. The aim of this study was therefore to present the main characteristics, sample preparation protocols and applications of X-ray fluorescence-based analytical techniques (energy dispersive X-ray fluorescence spectrometry—EDXRF, total reflection X-ray fluorescence spectrometry—TXRF and micro-proton induced X-ray emission—micro-PIXE). Element concentrations in plant leaves from metal polluted and non-polluted sites, as well as standard reference materials, were analyzed by the mentioned techniques, and additionally by instrumental neutron activation analysis (INAA) and atomic absorption spectrometry (AAS). The results were compared and critically evaluated in order to assess the performance and capability of X-ray fluorescence-based techniques in phytoremediation and plant biology studies. It is the EDXRF, which is recommended as suitable to be used in the analyses of a large number of samples, because it is multi-elemental, requires only simple preparation of sample material, and it is analytically comparable to the most frequently used instrumental chemical techniques. The TXRF is compatible to FAAS in sample preparation, but relative to AAS it is fast

  19. A Comparative Study of Fouling and Bottom Ash from Woody Biomass Combustion in a Fixed-Bed Small-Scale Boiler and Evaluation of the Analytical Techniques Used

    Directory of Open Access Journals (Sweden)

    Lara Febrero

    2015-05-01

    Full Text Available In this work, fouling and bottom ash were collected from a low-power boiler after wood pellet combustion and studied using several analytical techniques to characterize and compare samples from different areas and determine the suitability of the analysis techniques employed. TGA results indicated that the fouling contained a high amount of organic matter (70%. The XRF and SEM-EDS measurements revealed that Ca and K are the main inorganic elements and exhibit clear tendency in the content of Cl that is negligible in the bottom ash and increased as it penetrated into the innermost layers of the fouling. Calcite, magnesia and silica appeared as the major crystalline phases in all the samples. However, the bottom ash was primarily comprised of calcium silicates. The KCl behaved identically to the Cl, preferably appeared in the adhered fouling samples. This salt, which has a low melting point, condenses upon contact with the low temperature tube and played a crucial role in the early stages of fouling formation. XRD was the most useful technique applied, which provided a semi-quantitative determination of the crystalline phases. FTIR was proven to be inadequate for this type of sample. The XRF and SEM-EDS, techniques yield similar results despite being entirely different.

  20. 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide emissions from coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    Sorge, J.N.; Larrimore, C.L.; Slatsky, M.D.; Menzies, W.R.; Smouse, S.M.; Stallings, J.W.

    1997-12-31

    This paper discusses the technical progress of a US Department of Energy Innovative Clean Coal Technology project demonstrating advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NOx) emissions from coal-fired boilers. The primary objectives of the demonstration is to determine the long-term NOx reduction performance of advanced overfire air (AOFA), low NOx burners (LNB), and advanced digital control optimization methodologies applied in a stepwise fashion to a 500 MW boiler. The focus of this paper is to report (1) on the installation of three on-line carbon-in-ash monitors and (2) the design and results to date from the advanced digital control/optimization phase of the project.

  1. A study of structural, optical and dielectric properties of crystalline Sr2Nb2O7 nanoparticles synthesized by a modified combustion technique

    Science.gov (United States)

    Mathai, K. C.; Vidya, S.; Solomon, Sam; Thomas, J. K.

    2014-01-01

    Nanocrystalline Strontium Pyroniobate is synthesized by a novel auto-igniting combustion technique. The X-Ray diffraction studies reveal that Strontium Niobate possesses orthorhombic structure. Phase purity and structure of the nanopowder is further examined using Fourier-Transform Infrared and Raman spectroscopy. The average particle size of the as prepared nanoparticles from the Transmission Electron Microscopy is 30 nm. Sr2Nb2O7 is a photoluminescent material and the optical band gap determined from the UV-DRS spectrum is 2.7eV. The sample is sintered at an optimized temperature of 1350°C for 2 hours and obtained maximum density. The dielectric constant and loss factor values obtained at 5MHz for a well-sintered Strontium Niobate pellet is found to be 40 and 3.9×10-3 respectively, at room temperature.

  2. Computational Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Westbrook, C K; Mizobuchi, Y; Poinsot, T J; Smith, P J; Warnatz, J

    2004-08-26

    Progress in the field of computational combustion over the past 50 years is reviewed. Particular attention is given to those classes of models that are common to most system modeling efforts, including fluid dynamics, chemical kinetics, liquid sprays, and turbulent flame models. The developments in combustion modeling are placed into the time-dependent context of the accompanying exponential growth in computer capabilities and Moore's Law. Superimposed on this steady growth, the occasional sudden advances in modeling capabilities are identified and their impacts are discussed. Integration of submodels into system models for spark ignition, diesel and homogeneous charge, compression ignition engines, surface and catalytic combustion, pulse combustion, and detonations are described. Finally, the current state of combustion modeling is illustrated by descriptions of a very large jet lifted 3D turbulent hydrogen flame with direct numerical simulation and 3D large eddy simulations of practical gas burner combustion devices.

  3. Putting combustion optimization to work

    Energy Technology Data Exchange (ETDEWEB)

    Spring, N.

    2009-05-15

    New plants and plants that are retrofitting can benefit from combustion optimization. Boiler tuning and optimization can complement each other. The continuous emissions monitoring system CEMS, and tunable diode laser absorption spectroscopy TDLAS can be used for optimisation. NeuCO's CombustionOpt neural network software can determine optimal fuel and air set points. Babcock and Wilcox Power Generation Group Inc's Flame Doctor can be used in conjunction with other systems to diagnose and correct coal-fired burner performance. The four units of the Colstrip power plant in Colstrips, Montana were recently fitted with combustion optimization systems based on advanced model predictive multi variable controls (MPCs), ABB's Predict & Control tool. Unit 4 of Tampa Electric's Big Bend plant in Florida is fitted with Emerson's SmartProcess fuzzy neural model based combustion optimisation system. 1 photo.

  4. Pyrolysis and Combustion of Pulverized Wheat Straw in a Pressurized Entrained Flow Reactor

    DEFF Research Database (Denmark)

    Fjellerup, Jan Søren; Gjernes, Erik; Hansen, Lars Kresten

    1996-01-01

    Within the past decade, there has been an interest for pressurized combustion and gasification of solid fuels in power plants due to the potential for high efficiency. The utilization of new types of solid fuels for pressurized combustion and gasification depends on char yield and char reactivity...... at relevant conditions. The pressurized entrained now reactor designed at Rise is introduced. Pyrolysis and combustion at 10 and 20 bar pressure have been studied using pulverized wheat straw. Samples of partly reacted particles are collected, and the conversion is calculated using the ash tracer technique...

  5. Scale-up study on combustibility and emission formation with two biomass fuels (B quality wood and pepper plant residue) under BFB conditions

    Energy Technology Data Exchange (ETDEWEB)

    Khan, Atif Ahmed; de Jong, Wiebren; Jansens, Peter Johannes [Department of Process and Energy, Section Energy Technology, Faculty 3ME, Delft University of Technology, Leeghwaterstraat 44, NL-2628 CA, Delft (Netherlands); Aho, Martti; Vainikka, Pasi [VTT Processes, P.O. Box 1603, 40101 Jyvaeskylae (Finland); Spliethoff, Hartmut [TU Munich, Lehrstuhl fuer Thermische Kraftanlagen, Boltzmannstrasse 15, D-85748 Garching (Germany)

    2008-12-15

    Combustion of two biomass fuels: demolition wood (DW) and pepper plant residue (PPR), was investigated from an emission viewpoint in a 20 kW{sub th} fluidized bubbling bed reactor and a 1 MW{sub th} fluidized bubbling bed test boiler. Fluidization velocity and boiler output were varied in the larger facility whereas they were kept constant in the smaller reactor. Traditional flue gases were analyzed. In addition, impactor measurements were carried out to determine the mass flow of the finest fly ash and toxic elements. These measurements were compared with EU emission directives for biomass co-incineration. It was possible to combust DW without operational problems. However, the DW was contaminated with lead, which tended to get strongly enriched in the fine fly ash. Pb tends to be adsorbed on the measurement line surfaces stronger than many other toxic elements and therefore proved difficult to collect and measure. Enrichment of Pb in the fine fly ash can be weakened by co-firing DW with PPR. Increasing the share of PPR up to 50% markedly reduces the toxic metal concentration in the finest fly ash. This, however, leads to increased mass flow of fine fly ash and increases the potential risks of operational problems such as bed agglomeration and fouling. (author)

  6. Preparation and co-combustion of whole plants in a coal dust furnace; Aufbereitung und Mitverbrennung von Ganzpflanzen mit Steinkohle in einer Staubfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Siegle, V.; Spliethoff, H.; Hein, K.R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen (IVD)

    1996-12-31

    Co-combustion is a favourable and simple way of utilizing biomass. Owing to the high energy density of grains, whole plants must be ground very thoroughly for use in a coal dust furnace. This can be done with low energy consumption in a hammer mill. In addition, multifuel swirl burners permit selective supply of fuel and low-NO{sub x} combustion. The fuel with the highest nitrogen content should be blown into the inner recirculation zone. (orig) [Deutsch] Die Mitverbrennung von Biomasse ist eine guenstige und schnell zu realisierende Moeglichkeit, Biomasse in grossem Umfang zu nutzen. Um Ganzpflanzen in einer Staubfeuerung mitverbrennen zu koennen, muessen diese aufgrund der hohen Energiedichte der Koerner sehr fein aufgemahlen werden. Dies ist mit einer Hammermuehle mit geringem Energieeinsatz moeglich. Durch eine geeignete Sichtung muss diese jedoch noch weiter optimiert werden. Mit Multi-Fuel-Drallbrennern ist eine stickoxidarme Verbrennung moeglich. Der Brennstoff, der den groesseren Stickstoffeintrag in die Flamme bewirkt, soltle in die innere Rezirkulationszone eingeblasen werden. (orig)

  7. Mult-Pollutant Control Through Novel Approaches to Oxygen Enhanced Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Richard Axelbaum; Pratim Biswas

    2009-02-28

    Growing concerns about global climate change have focused effortss on identifying approaches to stabilizing carbon dioxide levels in the atmosphere. One approach utilizes oxy-fuel combustion to produce a concentrated flue gas that will enable economical CO{sub 2} capture by direct methods. Oxy-fuel combustion rewuires an Air Separation Unit (ASU) to provide a high-purity stream of oxygen as well as a Compression and Purification Unit (CPU) to clean and compress the CO{sub 2} for long term storage. Overall plant efficiency will suffer from the parasitic load of both the ASU and CPU and researchers are investigating techniques to enhance other aspects of the combustion and gas cleanup proceses to improve the benefit-to-cost ratio. This work examines the influence of oxy-fuel combustion and non-carbon based sorbents on the formation and fate of multiple combustion pollutants both numerically and experimentally.

  8. A study of residence time distribution using radiotracer technique in the large scale plant facility

    Science.gov (United States)

    Wetchagarun, S.; Tippayakul, C.; Petchrak, A.; Sukrod, K.; Khoonkamjorn, P.

    2017-06-01

    As the demand for troubleshooting of large industrial plants increases, radiotracer techniques, which have capability to provide fast, online and effective detections to plant problems, have been continually developed. One of the good potential applications of the radiotracer for troubleshooting in a process plant is the analysis of Residence Time Distribution (RTD). In this paper, the study of RTD in a large scale plant facility using radiotracer technique was presented. The objective of this work is to gain experience on the RTD analysis using radiotracer technique in a “larger than laboratory” scale plant setup which can be comparable to the real industrial application. The experiment was carried out at the sedimentation tank in the water treatment facility of Thailand Institute of Nuclear Technology (Public Organization). Br-82 was selected to use in this work due to its chemical property, its suitable half-life and its on-site availability. NH4Br in the form of aqueous solution was injected into the system as the radiotracer. Six NaI detectors were placed along the pipelines and at the tank in order to determine the RTD of the system. The RTD and the Mean Residence Time (MRT) of the tank was analysed and calculated from the measured data. The experience and knowledge attained from this study is important for extending this technique to be applied to industrial facilities in the future.

  9. Mapping element distributions in plant tissues using synchrotron X-ray fluorescence techniques.

    Science.gov (United States)

    Donner, Erica; de Jonge, Martin D; Kopittke, Peter M; Lombi, Enzo

    2013-01-01

    Synchrotron-based X-ray fluorescence (XRF) is allowing substantial advances in several disciplines of plant science by allowing the in situ examination of elements within plant tissues. Continual improvements in detector speed, sensitivity, and resolution are increasing the diversity of questions that can be addressed using this technique, including the in situ analysis of elements (such as nutrients or toxicants) within fresh and hydrated tissues. Here, we describe the general principles for designing and conducting experiments for the examination of elemental distributions in plant material using micro-XRF.

  10. An improved technique for obtaining well-spread metaphases from plants with numerous large chromosomes.

    Science.gov (United States)

    Rodríguez-Domínguez, J M; Ríos-Lara, L L; Tapia-Campos, E; Barba-Gonzalez, R

    2017-01-01

    Preparations that contain well-spread metaphase chromosomes are critical for plant cytogenetic analyses including chromosome counts, banding procedures, in situ hybridization, karyotyping and construction of ideograms. Chromosome spreading is difficult for plants with large and numerous chromosomes. We report here a technique for obtaining cytoplasm-free, well-spread metaphases from two Amaryllidaceae species: Sprekelia formosissima (2n = 120) and Hymenocallis howardii (2n = 96). The technique has three main steps: 1) pretreatment to cause chromosome condensation, 2) dripping onto tilted slides coated with a thin layer of pure acetic acid and 3) application of steam and acetic acid to produce cytoplasmic hydrolysis, which spreads the chromosomes.

  11. Combustion 2000

    Energy Technology Data Exchange (ETDEWEB)

    A. Levasseur; S. Goodstine; J. Ruby; M. Nawaz; C. Senior; F. Robson; S. Lehman; W. Blecher; W. Fugard; A. Rao; A. Sarofim; P. Smith; D. Pershing; E. Eddings; M. Cremer; J. Hurley; G. Weber; M. Jones; M. Collings; D. Hajicek; A. Henderson; P. Klevan; D. Seery; B. Knight; R. Lessard; J. Sangiovanni; A. Dennis; C. Bird; W. Sutton; N. Bornstein; F. Cogswell; C. Randino; S. Gale; Mike Heap

    2001-06-30

    . To achieve these objectives requires a change from complete reliance of coal-fired systems on steam turbines (Rankine cycles) and moving forward to a combined cycle utilizing gas turbines (Brayton cycles) which offer the possibility of significantly greater efficiency. This is because gas turbine cycles operate at temperatures well beyond current steam cycles, allowing the working fluid (air) temperature to more closely approach that of the major energy source, the combustion of coal. In fact, a good figure of merit for a HIPPS design is just how much of the enthalpy from coal combustion is used by the gas turbine. The efficiency of a power cycle varies directly with the temperature of the working fluid and for contemporary gas turbines the optimal turbine inlet temperature is in the range of 2300-2500 F (1260-1371 C). These temperatures are beyond the working range of currently available alloys and are also in the range of the ash fusion temperature of most coals. These two sets of physical properties combine to produce the major engineering challenges for a HIPPS design. The UTRC team developed a design hierarchy to impose more rigor in our approach. Once the size of the plant had been determined by the choice of gas turbine and the matching steam turbine, the design process of the High Temperature Advanced Furnace (HITAF) moved ineluctably to a down-fired, slagging configuration. This design was based on two air heaters: one a high temperature slagging Radiative Air Heater (RAH) and a lower temperature, dry ash Convective Air Heater (CAH). The specific details of the air heaters are arrived at by an iterative sequence in the following order:-Starting from the overall Cycle requirements which set the limits for the combustion and heat transfer analysis-The available enthalpy determined the range of materials, ceramics or alloys, which could tolerate the temperatures-Structural Analysis of the designs proved to be the major limitation-Finally the commercialization

  12. Combustion 2000

    Energy Technology Data Exchange (ETDEWEB)

    A. Levasseur; S. Goodstine; J. Ruby; M. Nawaz; C. Senior; F. Robson; S. Lehman; W. Blecher; W. Fugard; A. Rao; A. Sarofim; P. Smith; D. Pershing; E. Eddings; M. Cremer; J. Hurley; G. Weber; M. Jones; M. Collings; D. Hajicek; A. Henderson; P. Klevan; D. Seery; B. Knight; R. Lessard; J. Sangiovanni; A. Dennis; C. Bird; W. Sutton; N. Bornstein; F. Cogswell; C. Randino; S. Gale; Mike Heap

    2001-06-30

    . To achieve these objectives requires a change from complete reliance of coal-fired systems on steam turbines (Rankine cycles) and moving forward to a combined cycle utilizing gas turbines (Brayton cycles) which offer the possibility of significantly greater efficiency. This is because gas turbine cycles operate at temperatures well beyond current steam cycles, allowing the working fluid (air) temperature to more closely approach that of the major energy source, the combustion of coal. In fact, a good figure of merit for a HIPPS design is just how much of the enthalpy from coal combustion is used by the gas turbine. The efficiency of a power cycle varies directly with the temperature of the working fluid and for contemporary gas turbines the optimal turbine inlet temperature is in the range of 2300-2500 F (1260-1371 C). These temperatures are beyond the working range of currently available alloys and are also in the range of the ash fusion temperature of most coals. These two sets of physical properties combine to produce the major engineering challenges for a HIPPS design. The UTRC team developed a design hierarchy to impose more rigor in our approach. Once the size of the plant had been determined by the choice of gas turbine and the matching steam turbine, the design process of the High Temperature Advanced Furnace (HITAF) moved ineluctably to a down-fired, slagging configuration. This design was based on two air heaters: one a high temperature slagging Radiative Air Heater (RAH) and a lower temperature, dry ash Convective Air Heater (CAH). The specific details of the air heaters are arrived at by an iterative sequence in the following order:-Starting from the overall Cycle requirements which set the limits for the combustion and heat transfer analysis-The available enthalpy determined the range of materials, ceramics or alloys, which could tolerate the temperatures-Structural Analysis of the designs proved to be the major limitation-Finally the commercialization

  13. Geochemical database of feed coal and coal combustion products (CCPs) from five power plants in the United States

    Science.gov (United States)

    Affolter, Ronald H.; Groves, Steve; Betterton, William J.; William, Benzel; Conrad, Kelly L.; Swanson, Sharon M.; Ruppert, Leslie F.; Clough, James G.; Belkin, Harvey E.; Kolker, Allan; Hower, James C.

    2011-01-01

    The principal mission of the U.S. Geological Survey (USGS) Energy Resources Program (ERP) is to (1) understand the processes critical to the formation, accumulation, occurrence, and alteration of geologically based energy resources; (2) conduct scientifically robust assessments of those resources; and (3) study the impacts of energy resource occurrence and (or) their production and use on both the environment and human health. The ERP promotes and supports research resulting in original, geology-based, non-biased energy information products for policy and decision makers, land and resource managers, other Federal and State agencies, the domestic energy industry, foreign governments, non-governmental groups, and academia. Investigations include research on the geology of oil, gas, and coal, and the impacts associated with energy resource occurrence, production, quality, and utilization. The ERP's focus on coal is to support investigations into current issues pertaining to coal production, beneficiation and (or) conversion, and the environmental impact of the coal combustion process and coal combustion products (CCPs). To accomplish these studies, the USGS combines its activities with other organizations to address domestic and international issues that relate to the development and use of energy resources.

  14. Cleaning of condensate from flue gas condensing plants at co-combustion of waste fuels. Follow-up of emissions; Rening av kondensat fraan roekgaskondenseringsanlaeggningar vid samfoerbraenning av avfallsbraenslen. Uppfoeljning av utslaepp

    Energy Technology Data Exchange (ETDEWEB)

    Sundquist, Lena; Dejfors, Charlotte; Wrangensten, Lars [AaF Energikonsult AB, Stockholm (Sweden)

    2002-03-01

    Limits of discharges in waste water at flue gas cleaning are one of the fields included in the EC-directive (2000/76/EG) regarding combustion of waste from December 28th, 2000. The pollutants included in the limits are suspended material, Hg, Cd, Tl, As, Pb, Cr, Cu, Ni, Zn as well as dioxins and furans. The limits of the directive applies generally for plants with combustion of waste, regardless of type of waste fraction, the degree of admixture or if it is a so called co-combustion plant or not. For new plants, the limits shall be fulfilled within two years after the date of the directive whereas existing plants have another three years to meet the new demands. In this project, the condensate from the flue gas has been analysed at five different combustion plants. Samples of the fuel have also been analysed as a reference at the evaluation of the results. The results from the analysed condensate have then been compared and evaluated with regards to the limit values in the EC-directive. However, one exception is dioxins and furans that are not included in this study. The analysis of the pure condensate show that at most plants the content of pollutants is below, or in some cases well below, the limits of the EC-directive. At plants with co-combustion of recovered biofuels, even the contents of pollutants in the non-purified raw condensate are below the limits of the directive. This means that plants with co-combustion of recovered wood waste and biofuels most likely will meet the requirements for emissions to waste water in the EC-directive. The water treatment process in these plants normally consists of a pH-adjustment stage followed by adding of chemicals before the condensate enters into a sand filter. The cleaned condensate from the sand filter is normally released to a recipient whereas the dirty condensate goes through a lamell separator in order to separate rest sludge. The most polluted raw condensate was found at a plant with 100 % combustion of municipal

  15. Large fluidized bed combustion power plant unit for the supply of electricity and heat for Berlin. Pt. 1. Groesster Wirbelschicht-Kraftwerksblock zur Strom- und Fernwaermeversorgung fuer Berlin. T. 1

    Energy Technology Data Exchange (ETDEWEB)

    Abroell, G. (ABB Kraftwerke AG, Mannheim (Germany)); Bade, H. (Berliner Kraft- und Licht (BEWAG)-AG, Berlin (Germany)); Bietz, K.H. (Lurgi GmbH, Frankfurt am Main (Germany)); Jahn, P. (EAB Energie-Anlagen Berlin GmbH (Germany))

    1991-11-01

    The Berlin Power and Light Company (Bewag) has decided to install, on the inner city site of Moabit, for the supply of electricity and district heating, a new unit with circulation atmospheric fluidized bed combustion. The plant will be designed for a thermal capacity of 240 MW. The basis for this decision, and also the technical implementation, will be made public. (orig.).

  16. Large fluidized bed combustion power plant unit for the supply of electricity and heat for Berlin. Pt. 2. Groesster Wirbelschicht-Kraftwerksblock zur Strom- und Fernwaermeversorgung fuer Berlin. T. 2

    Energy Technology Data Exchange (ETDEWEB)

    Abroell, G. (ABB Kraftwerke AG, Mannheim (Germany)); Bade, H. (Berliner Kraft- und Licht (BEWAG)-AG, Berlin (Germany)); Bietz, K.H. (Lurgi GmbH, Frankfurt am Main (Germany)); Jahn, P. (EAB Energie-Anlagen Berlin GmbH (Germany))

    1991-12-01

    The Berlin Power and Light Company (Bewag) has decided to install, on the inner city site of Moabit, for the supply of electricity and district heating, a new unit with circulation atmospheric fluidized bed combustion. The plant will be designed for a thermal capacity of 240 MW. The bases for this decision, and also the technical implementation, will be made public. (orig.).

  17. Optical and chemical characterization of aerosols emitted from coal, heavy and light fuel oil, and small-scale wood combustion.

    Science.gov (United States)

    Frey, Anna K; Saarnio, Karri; Lamberg, Heikki; Mylläri, Fanni; Karjalainen, Panu; Teinilä, Kimmo; Carbone, Samara; Tissari, Jarkko; Niemelä, Ville; Häyrinen, Anna; Rautiainen, Jani; Kytömäki, Jorma; Artaxo, Paulo; Virkkula, Aki; Pirjola, Liisa; Rönkkö, Topi; Keskinen, Jorma; Jokiniemi, Jorma; Hillamo, Risto

    2014-01-01

    Particle emissions affect radiative forcing in the atmosphere. Therefore, it is essential to know the physical and chemical characteristics of them. This work studied the chemical, physical, and optical characteristics of particle emissions from small-scale wood combustion, coal combustion of a heating and power plant, as well as heavy and light fuel oil combustion at a district heating station. Fine particle (PM1) emissions were the highest in wood combustion with a high fraction of absorbing material. The emissions were lowest from coal combustion mostly because of efficient cleaning techniques used at the power plant. The chemical composition of aerosols from coal and oil combustion included mostly ions and trace elements with a rather low fraction of absorbing material. The single scattering albedo and aerosol forcing efficiency showed that primary particles emitted from wood combustion and some cases of oil combustion would have a clear climate warming effect even over dark earth surfaces. Instead, coal combustion particle emissions had a cooling effect. Secondary processes in the atmosphere will further change the radiative properties of these emissions but are not considered in this study.

  18. Results from trialling aqueous NH{sub 3} based post combustion capture in a pilot plant at Munmorah power station. Desorption

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hai; Morgan, Scott; Allport, Andrew; Cottrell, Aaron; Do, Thong; McGregor, James; Wardhaugh, Leigh; Feron, Paul [CSIRO Energy Centre, Mayfield West, NSW (Australia)

    2013-07-01

    Australia's Commonwealth Scientific and Industrial Research Organization (CSIRO) and Delta Electricity have tested an aqueous ammonia based post combustion capture (PCC) process in a pilot plant at Munmorah black coal fired power station. This paper presents and discusses the experimental results obtained and primarily focuses on the desorption section. A high purity of CO{sub 2} product was obtained at the stripper gas outlet with the CO{sub 2} volumetric concentration generally between 99-100% and the remainder being water and NH{sub 3}. An increase in stripper pressure/temperature can lead to a decrease in NH{sub 3} concentration in the CO{sub 2} product. The NH{sub 3} concentration can be controlled within 200 ppm without wash at a stripper pressure of 850 kPa (the maximum pressure tested) at a stripper gas outlet temperatures of 20-25 C. The solid precipitation occurred in the stripper condenser and reflux lines. Due to the low ammonia content in the solution, CO{sub 2} content in the solution was low and generally more than 50% of regeneration energy was used to heat up the solvent under the pilot plant conditions. The lowest regeneration energy obtained from the pilot plant trials is 4-4.2 MJ/kg CO{sub 2} captured. The effect of various parameters including solvent flow-rate and stripper temperature/pressure in the solvent on the regeneration energy was investigated.

  19. Studies on Plant Population and Stand Establishment Techniques for Increasing Productivity of Rice in Dera Ismail Khan, Pakistan

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Rice production in Pakistan is constraint by many factors pertaining to prevalent planting techniques. A research on the feasibility of new planting techniques (direct seeding on flat, transplanting on flat, direct seeding on ridges, transplanting on ridges and parachute planting) in transplanted and direct wet-seeded rice was undertaken at Dera Ismail Khan region of Pakistan's North West Frontier Province during 2002 and 2003. Among the planting techniques, the best performance for the yield formation and economic evaluation was noted for transplanting on flat during both years. Chinese parachute planting technology also showed very promising results in most of the parameters. Direct seeding on ridges could not excel transplanting on flat and parachute planting during both cropping seasons. The findings concluded the feasibility of parachute planting technology along with traditional rice transplanting on flat over all other planting techniques being practiced in the area.

  20. Studies on Plant Population and Stand Establishment Techniques for Increasing Productivity of Rice in Dera Ismail Khan, Pakistan

    Directory of Open Access Journals (Sweden)

    Mohammad Safdar BALOCH

    2007-06-01

    Full Text Available Rice production in Pakistan is constraint by many factors pertaining to prevalent planting techniques. A research on the feasibility of new planting techniques (direct seeding on flat, transplanting on flat, direct seeding on ridges, transplanting on ridges and parachute planting in transplanted and direct wet-seeded rice was undertaken at Dera Ismail Khan region of Pakistan's North West Frontier Province during 2002 and 2003. Among the planting techniques, the best performance for the yield formation and economic evaluation was noted for transplanting on flat during both years. Chinese parachute planting technology also showed very promising results in most of the parameters. Direct seeding on ridges could not excel transplanting on flat and parachute planting during both cropping seasons. The findings concluded the feasibility of parachute planting technology along with traditional rice transplanting on flat over all other planting techniques being practiced in the area.

  1. Analysing patent landscapes in plant biotechnology and new plant breeding techniques.

    Science.gov (United States)

    Parisi, Claudia; Rodríguez-Cerezo, Emilio; Thangaraj, Harry

    2013-02-01

    This article aims to inform the reader of the importance of searching patent landscapes in plant biotechnology and the use of basic tools to perform a patent search. The recommendations for a patent search strategy are illustrated with the specific example of zinc finger nuclease technology for genetic engineering in plants. Within this scope, we provide a general introduction to searching using two online and free-access patent databases esp@cenet and PatentScope. The essential features of the two databases, and their functionality is described, together with short descriptions to enable the reader to understand patents, searching, their content, patent families, and their territorial scope. We mostly stress the value of patent searching for mining scientific, rather than legal information. Search methods through the use of keywords and patent codes are elucidated together with suggestions about how to search with or combine codes with keywords and we also comment on limitations of each method. We stress the importance of patent literature to complement more mainstream scientific literature, and the relative complexities and difficulties in searching patents compared to the latter. A parallel online resource where we describe detailed search exercises is available through reference for those intending further exploration. In essence this is aimed at a novice patent searcher who may want to examine accessory patent literature to complement knowledge gained from mainstream journal resources.

  2. Reducing air pollution from electricity-generating large combustion plants in the European Union. An assessment of potential emission reductions of NO{sub X}, SO{sub 2} and dust

    Energy Technology Data Exchange (ETDEWEB)

    Lodewijks, P.; Pieper, H.; Van Wortswinkel, L. [ETC partner Flemish Institute for Technological Research (VITO) (Belgium); Boyce, B.; Adams, M.; Goossens, E. [EEA, Copenhagen (Denmark)

    2013-06-15

    An assessment of potential emission reductions of NO{sub X}, SO{sub 2} and dust - This report presents an assessment of the hypothetical emission reduction potential of NO{sub x}, SO{sub 2} and dust from more than 1 500 of Europe's large combustion plants that operated in 2009. Emissions of these air pollutants could be significantly lower if all plants were to meet the emission limit values as set out in European Union legislation. (Author)

  3. CdSiO{sub 3}:Eu{sup 3+} red nanophosphors prepared by low temperature solution combustion technique, its structural and luminescent properties

    Energy Technology Data Exchange (ETDEWEB)

    Nagabhushana, H., E-mail: bhushanvlc@gmail.com [Prof. C.N.R. Rao Centre for Advanced Materials Research, Tumkur University, Tumkur 572 103 (India); Sunitha, D.V. [Prof. C.N.R. Rao Centre for Advanced Materials Research, Tumkur University, Tumkur 572 103 (India); Sharma, S.C. [Chattisgarh Swami Vivekananda Technical University, Bhilai, CG 493441 (India); Prashantha, S.C., E-mail: scphysics@gmail.com [Research Center, Department of Science, East West Institute of Technology, Bangalore 560 091 (India); Nagabhushana, B.M. [Department of Chemistry, M.S. Ramaiah Institute of Technology, Bangalore 560 054 (India); Chakradhar, R.P.S. [CSIR-National Aerospace Laboratories, Bangalore 560017 (India)

    2014-12-15

    Highlights: • CdSiO{sub 3}:Eu{sup 3+} phosphors were prepared by low temperature solution combustion technique for the first time. • XRD, SEM and FTIR techniques were used to characterize the phosphor. • Highest PL emission was recorded at 4 mol% of Eu{sup 3+} doped CdSiO{sub 3}. • Prepared phosphor can be effectively used for making the white LEDs. • The color purity has been verified by using the CIE diagram. - Abstract: CdSiO{sub 3}:Eu{sup 3+} (0.5–5 mol%) nanophosphors were synthesized using oxalyl di-hydrazide fuel by solution combustion technique for the first time{sub .} The structural, thermo and photoluminescent properties were studied. The average particle size was estimated from transmission electron microscopy (TEM) studies and found to be in the range 20–30 nm. The values were in good agreement with Scherer’s method and Williamson–Hall plots. Scanning electron microscope (SEM) showed highly porous, fluffy and many agglomerated particles. Photoluminescence (PL) CdSiO{sub 3}:Eu{sup 3+} (0.5–5 mol%) shows emission peaks at 577, 596, 612, 659 and 706 nm which were assigned to {sup 5}D{sub 0} → {sup 7}F{sub j} (j = 0, 1, 2, 3, 4) transition respectively. It was observed that PL intensity increases up to the concentration 4 mol% Eu{sup 3+}. Thermoluminescence (TL) studies were carried out on CdSiO{sub 3}:Eu{sup 3+} (1–5 mol%) nanophosphor by exposing to γ-rays (1–6 kGy) and UV (5–25 min) respectively. The TL intensity was found to be highest in 1 mol% Eu{sup 3+} concentration. Further, effect of different gamma (1–6 kGy) and UV (5–25 min) exposure was studied on CdSiO{sub 3}:Eu{sup 3+} nanophosphor. Simple well resolved glow peak at ∼178 °C was recorded for both the exposures. The TL intensity at 178 °C increase linearly with increase in the γ-dose. However, in UV exposed samples the TL glow peak intensity increase up to 10 min and thereafter the peak intensity decreases with further increase in exposure time. The effect

  4. Comparative quantification of oxygen release by wetland plants: electrode technique and oxygen consumption model.

    Science.gov (United States)

    Wu, Haiming; Liu, Jufeng; Zhang, Jian; Li, Cong; Fan, Jinlin; Xu, Xiaoli

    2014-01-01

    Understanding oxygen release by plants is important to the design of constructed wetlands for wastewater treatment. Lab-scale systems planted with Phragmites australis were studied to evaluate the amount of oxygen release by plants using electrode techniques and oxygen consumption model. Oxygen release rate (0.14 g O2/m(2)/day) measured using electrode techniques was much lower than that (3.94-25.20 gO2/m(2)/day) calculated using the oxygen consumption model. The results revealed that oxygen release by plants was significantly influenced by the oxygen demand for the degradation of pollutants, and the oxygen release rate increased with the rising of the concentration of degradable materials in the solution. The summary of the methods in qualifying oxygen release by wetland plants demonstrated that variations existed among different measuring methods and even in the same measuring approach. The results would be helpful for understanding the contribution of plants in constructed wetlands toward actual wastewater treatment.

  5. Monitoring programmed cell death of living plant tissues in microfluidics using electrochemical and optical techniques

    DEFF Research Database (Denmark)

    Mark, Christina; Zor, Kinga; Heiskanen, Arto

    This project focuses on developing and applying a tissue culture system with electrochemical and optical detection techniques for tissue culture of barley aleurone layer to increase understanding of the underlying mechanisms of programmed cell death (PCD) in plants. The major advantage of electro...

  6. Exploring Genetic Diversity in Plants Using High-Throughput Sequencing Techniques.

    Science.gov (United States)

    Onda, Yoshihiko; Mochida, Keiichi

    2016-08-01

    Food security has emerged as an urgent concern because of the rising world population. To meet the food demands of the near future, it is required to improve the productivity of various crops, not just of staple food crops. The genetic diversity among plant populations in a given species allows the plants to adapt to various environmental conditions. Such diversity could therefore yield valuable traits that could overcome the food-security challenges. To explore genetic diversity comprehensively and to rapidly identify useful genes and/or allele, advanced high-throughput sequencing techniques, also called next-generation sequencing (NGS) technologies, have been developed. These provide practical solutions to the challenges in crop genomics. Here, we review various sources of genetic diversity in plants, newly developed genetic diversity-mining tools synergized with NGS techniques, and related genetic approaches such as quantitative trait locus analysis and genome-wide association study.

  7. A lucrative technique to reduce Ni toxicity in Raphanus sativus plant by phosphate amendment: Special reference to plant metabolism.

    Science.gov (United States)

    Singh, Anita; Prasad, Sheo Mohan

    2015-09-01

    Nickel (Ni) contamination is one of the serious environmental problems. It creates hazard in soil environment and also in crop quality. In the present study, response of Raphanus sativus (radish) to Ni (50mgkg(-1) soil) under different concentrations (100, 200, 500 and 1000 DAPmgkg(-1) soil) of phosphate as soil amendment was investigated after 40 days of growth. Ni-treated plants without amendment showed reduction in their growth as a result of appreciable decrease in the photosynthetic activity. Under this treatment, Ni accumulation significantly enhanced lipid peroxidation and level of oxidants showing oxidative stress and it was also associated with decrease in the activities of antioxidative enzymes except super oxide dismutase (SOD). Application of phosphate in Ni contaminated soil resulted into significant improvement in plant growth. Under phosphate amendment, the status of oxidative biomarkers: SOR, TBARS and H2O2 were under control by the higher activity of antioxidants: APX, CAT, POD, GST and DHAR compared to Ni contaminated soil without amendment. Principal component analysis (PCA) was performed to show the significant changes in biochemical traits under control and phosphate amendment. The values of PS II transient kinetics: Phi-E0, Psi-0 and PIABS increased and values of energy fluxes: ABC/RC, Tro/RC, Eto/RC and Dio/RC decreased in plants grown in Ni contaminated soil under phosphate amendment as compared to without amendment. Among all doses of phosphate amendment soil amended at 500mg DAPkg(-)(1) soil the yield of plant was the highest and Ni accumulation was the lowest. As compared to plants grown in Ni treated soil without amendment the yield of plant at 500mg DAPkg(-1) soil showed about 70% increment and the reduction in Ni accumulation was 63% in shoot and 64% in root. Because of these beneficial effects this technique can be easily applied at metal contaminated agricultural fields to reduce food chain contamination and to improve food quality.

  8. Application of plant growth regulators, a simple technique for improving the establishment success of plant cuttings in coastal dune restoration

    Science.gov (United States)

    Balestri, Elena; Vallerini, Flavia; Castelli, Alberto; Lardicci, Claudio

    2012-03-01

    Exogenous application of plant growth regulators (PGRs) may be an effective technique for increasing the rooting ability and the growth of vegetative fragments (cuttings) of plants used in dune restoration programs. Various concentrations (0, 50 and 100 mg l-1) of two auxins, alpha-naphtaleneacetic acid (NAA) and indole-3-butyric acid (IBA), and two cytokinins, 6-furfurylaminopurine (Kinetin) and 6-benzylaminopurine (BAP), were applied separately to cuttings of two widely used species for restoration, Ammophila arenaria and Sporobuls virginicus. Root development and production of new buds in cuttings were examined under laboratory conditions one month after application. Cuttings were also examined one year after transplanting into a sandy substratum under natural conditions, to test for possible long term effects of PGRs on plant establishment success and growth. The response of the two study species to PGRs differed substantially. In A. arenaria the auxin NAA at 100 mg l-1 reduced the time for root initiation and increased the rooting capacity of cuttings, while the cytokinin Kinetin at 50 mg l-1 facilitated root growth. No auxin had effect on rooting or growth of S. virginicus cuttings, but treatment with 100 mg l-1 Kinetin resulted in higher rooting success than the control. One year after planting, the cuttings of A. arenaria treated with 100 mg l-1 NAA showed a higher establishment success (90% vs. 55%) and produced more culms and longer roots than the control; those treated with cytokinins did not differ in the establishment success from the control, but had longer roots, more culms and rhizomes. On the other hand, the cuttings of S. virginicus treated with 100 mg l-1 Kinetin showed a higher establishment success (75% vs. 35%) and had more culms than the control. Therefore, in restoration activities that involved A. arenaria, a pre-treatment of cuttings with NAA would be beneficial, as it allows the production of a higher number of well-developed plants with

  9. Estimation of essential and trace elements in some medicinal plants by PIXE and PIGE techniques

    Energy Technology Data Exchange (ETDEWEB)

    Devi, K. Nomita [Department of Physics, Manipur University, Canchipur, Imphal 795 003 (India)], E-mail: nomita_k@rediffmail.com; Sarma, H. Nandakumar [Department of Physics, Manipur University, Canchipur, Imphal 795 003 (India); Kumar, Sanjiv [National Centre for Compositional Characterization of Materials (CCCM), Hyderabad 500 062 (India)

    2008-04-15

    Proton induced X-ray emission (PIXE) and proton induced {gamma}-ray emission (PIGE) techniques are employed for the determination of essential and trace elements in some commonly used medicinal plants of north east India. Light elements such as Na, Mg, Al and P are determined by PIGE while medium Z elements such as K, Ca, Mn, Fe, Cu, Zn, Rb and Sr are determined by PIXE. Analysis is performed on pellets (thick targets) prepared using powders of the specimens which, in turn, are obtained following a series of processing steps. Plant based biological certified reference materials (CRMs) served as standards for quantification. These elements are found to be present in varying concentrations in the studied plants, with the contents of Mn and Zn being notably large in certain specimens. Medicinal properties possessed by these plants have been correlated with their elemental distribution.

  10. Damage and deterioration mechanism and curing technique of concrete structure in main coal cleaning plants

    Institute of Scientific and Technical Information of China (English)

    LV Heng-lin; ZHAO Cheng-ming; SONG Lei; MA Ying; XU Chun-hua

    2009-01-01

    Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Da-tun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian mine of the Xuzhou Mining Group Co. Ltd. In these projects, the operating environment and reliability of concrete structures in the main plants of the three companies were investigated and the safety of the structures inspected. Qualitative and quantitative analyses were made on the spe-cial natural, technological and mechanical environments around the structures. On the basis of these analyses, we discuss the long-term, combined actions of the harsh natural (corrosive gases, liquids and solids) and mechanical environments on concrete structures and further investigated the damage and deteriorating mechanisms and curing techniques of concrete structures in the main coal cleaning plants. Our study can provide a theoretical basis for ensuring the reliability of concrete structures in main coal cleaning plants.

  11. Estimation of trace elements in some anti-diabetic medicinal plants using PIXE technique

    Energy Technology Data Exchange (ETDEWEB)

    Naga Raju, G.J. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Sarita, P. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Ramana Murty, G.A.V. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Ravi Kumar, M. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Seetharami Reddy, B. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); John Charles, M. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Lakshminarayana, S. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Seshi Reddy, T. [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India); Reddy, S. Bhuloka [Swami Jnanananda Laboratories for Nuclear Research, Andhra University, Visakhapatnam-530 003, Andhra Pradesh (India)]. E-mail: sbr-r@yahoo.com; Vijayan, V. [Institute of Physics, Sachivalaya Marg, Bhubaneswar-751 005, Orissa (India)

    2006-08-15

    Trace elemental analysis was carried out in various parts of some anti-diabetic medicinal plants using PIXE technique. A 3 MeV proton beam was used to excite the samples. The elements Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb and Sr were identified and their concentrations were estimated. The results of the present study provide justification for the usage of these medicinal plants in the treatment of diabetes mellitus (DM) since they are found to contain appreciable amounts of the elements K, Ca, Cr, Mn, Cu, and Zn, which are responsible for potentiating insulin action. Our results show that the analyzed medicinal plants can be considered as potential sources for providing a reasonable amount of the required elements other than diet to the patients of DM. Moreover, these results can be used to set new standards for prescribing the dosage of the herbal drugs prepared from these plant materials.

  12. Determination of Mercury in an Assortment of Dietary Supplements Using an Inexpensive Combustion Atomic Absorption Spectrometry Technique

    OpenAIRE

    Levine, Keith E.; Levine, Michael A.; Weber, Frank X.; Hu, Ye; Perlmutter, Jason; Grohse, Peter M.

    2005-01-01

    The concentrations of mercury in forty, commercially available dietary supplements, were determined using a new, inexpensive analysis technique. The method involves thermal decomposition, amalgamation, and detection of mercury by atomic absorption spectrometry with an analysis time of approximately six minutes per sample. The primary cost savings from this approach is that labor-intensive sample digestion is not required prior to analysis, further automating the analytical procedure. As a res...

  13. Current status of molecular biological techniques for plant breeding in the Republic of Korea

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, Seong-Han; Lee, Si-Myung; Park, Bum-Seok; Yun, In-Sun; Goo, Doe-Hoe; Kim, Seok-Dong [Rural Development Administration, National Institute of Agricultural Science and Technology, Suwon (Korea)

    2002-02-01

    Classical plant breeding has played an important role in developing new varieties in current agriculture. For decades, the technique of cross-pollination has been popular for breeding in cereal and horticultural crops to introduce special traits. However, recently the molecular techniques get widely accepted as an alternative tool in both introducing a useful trait for developing the new cultivars and investigating the characteristics of a trait in plant, like the identification of a gene. Using the advanced molecular technique, several genetically modified (GM) crops (e.g., Roundup Ready Soybean, YieldGard, LibertyLink etc.) became commercially cultivated and appeared in the global market since 1996. The GM crops, commercially available at the moment, could be regarded as successful achievements in history of crop breeding conferring the specific gene into economically valuable crops to make them better. Along with such achievements, on the other hand these new crops have also caused the controversial debate on the safety of GM crops as human consumption and environmental release as well. Nevertheless, molecular techniques are widespread and popular in both investigating the basic science of plant biology and breeding new varieties compared to their conventional counterparts. Thus, the Department of Bioresources at the National Institute of Agricultural Science and Technology (NIAST) has been using the molecular biological techniques as a complimentary tool for the improvement of crop varieties for almost two decades. (author)

  14. A Dual-Line Detection Rayleigh Scattering Diagnostic Technique for the Combustion of Hydrocarbon Fuels and Filtered UV Rayleigh Scattering for Gas Velocity Measurements

    Science.gov (United States)

    Otugen, M. Volkan

    1997-01-01

    Non-intrusive techniques for the dynamic measurement of gas flow properties such as density, temperature and velocity, are needed in the research leading to the development of new generation high-speed aircraft. Accurate velocity, temperature and density data obtained in ground testing and in-flight measurements can help understand the flow physics leading to transition and turbulence in supersonic, high-altitude flight. Such non-intrusive measurement techniques can also be used to study combustion processes of hydrocarbon fuels in aircraft engines. Reliable, time and space resolved temperature measurements in various combustor configurations can lead to a better understanding of high temperature chemical reaction dynamics thus leading to improved modeling and better prediction of such flows. In view of this, a research program was initiated at Polytechnic University's Aerodynamics Laboratory with support from NASA Lewis Research Center through grants NAG3-1301 and NAG3-1690. The overall objective of this program has been to develop laser-based, non-contact, space- and time-resolved temperature and velocity measurement techniques. In the initial phase of the program a ND:YAG laser-based dual-line Rayleigh scattering technique was developed and tested for the accurate measurement of gas temperature in the presence of background laser glare. Effort was next directed towards the development of a filtered, spectrally-resolved Rayleigh/Mie scattering technique with the objective of developing an interferometric method for time-frozen velocity measurements in high-speed flows utilizing the uv line of an ND:YAG laser and an appropriate molecular absorption filter. This effort included both a search for an appropriate filter material for the 266 nm laser line and the development and testing of several image processing techniques for the fast processing of Fabry-Perot images for velocity and temperature information. Finally, work was also carried out for the development of

  15. Standard technical specifications combustion engineering plants: Bases (Sections 2.0--3.3). Volume 2, Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This report documents the results of the combined effort of the NRC and the industry to produce improved Standard Technical Specifications (STS), Revision 1 for General Electric BWR/6 Plants. The changes reflected in Revision 1 resulted from the experience gained from license amendment applications to convert to these improved STS or to adopt partial improvements to existing technical specifications. This NUREG is the result of extensive public technical meetings and discussions between the Nuclear Regulatory Commission (NRC) staff and various nuclear power plant licensees, Nuclear Steam Supply System (NSSS) Owners Groups, NSSS vendors, and the Nuclear Energy Institute (NEI). The improved STS were developed based on the criteria in the Final Commission Policy Statement on Technical Specifications Improvements for Nuclear Power Reactors, dated July 22, 1993. The improved STS will be used as the basis for individual nuclear power plant licensees to develop improved plant-specific technical specifications. This report contains three volumes.

  16. PTA装置催化燃烧系统存在问题和对策%PTA Plant of Catalytic Combustion System Problem and Counter-measurers

    Institute of Scientific and Technical Information of China (English)

    钱枝茂

    2012-01-01

    The paper described the PTA plant process and catalytic combustion process, found out the problems existing in the system .methanol pump switching speed is low, cause air compressor interlock. We analyzed the cause of it, the improvement measure were put forward, achieved good results. After the system redevelop, because methanol pump caused by switching the plant stops was great reduced.%文章叙述了PTA装置流程和催化燃烧工艺,指出了系统存在的问题,即甲醇泵切换速度慢,造成装置核心设备空压机联锁。分析了原因,提出了改进措施。取得了较好的效果。系统改造后.因甲醇泵切换造成装狂空压机停车的联锁次数大为减少。

  17. Combustion physics

    Science.gov (United States)

    Jones, A. R.

    1985-11-01

    Over 90% of our energy comes from combustion. By the year 2000 the figure will still be 80%, even allowing for nuclear and alternative energy sources. There are many familiar examples of combustion use, both domestic and industrial. These range from the Bunsen burner to large flares, from small combustion chambers, such as those in car engines, to industrial furnaces for steel manufacture or the generation of megawatts of electricity. There are also fires and explosions. The bountiful energy release from combustion, however, brings its problems, prominent among which are diminishing fuel resources and pollution. Combustion science is directed towards finding ways of improving efficiency and reducing pollution. One may ask, since combustion is a chemical reaction, why physics is involved: the answer is in three parts. First, chemicals cannot react unless they come together. In most flames the fuel and air are initially separate. The chemical reaction in the gas phase is very fast compared with the rate of mixing. Thus, once the fuel and air are mixed the reaction can be considered to occur instantaneously and fluid mechanics limits the rate of burning. Secondly, thermodynamics and heat transfer determine the thermal properties of the combustion products. Heat transfer also plays a role by preheating the reactants and is essential to extracting useful work. Fluid mechanics is relevant if work is to be performed directly, as in a turbine. Finally, physical methods, including electric probes, acoustics, optics, spectroscopy and pyrometry, are used to examine flames. The article is concerned mainly with how physics is used to improve the efficiency of combustion.

  18. Introduction of soft X-ray spectromicroscopy as an advanced technique for plant biopolymers research.

    Directory of Open Access Journals (Sweden)

    Chithra Karunakaran

    Full Text Available Soft X-ray absorption spectroscopy coupled with nano-scale microscopy has been widely used in material science, environmental science, and physical sciences. In this work, the advantages of soft X-ray absorption spectromicroscopy for plant biopolymer research were demonstrated by determining the chemical sensitivity of the technique to identify common plant biopolymers and to map the distributions of biopolymers in plant samples. The chemical sensitivity of soft X-ray spectroscopy to study biopolymers was determined by recording the spectra of common plant biopolymers using soft X-ray and Fourier Transform mid Infrared (FT-IR spectroscopy techniques. The soft X-ray spectra of lignin, cellulose, and polygalacturonic acid have distinct spectral features. However, there were no distinct differences between cellulose and hemicellulose spectra. Mid infrared spectra of all biopolymers were unique and there were differences between the spectra of water soluble and insoluble xylans. The advantage of nano-scale spatial resolution exploited using soft X-ray spectromicroscopy for plant biopolymer research was demonstrated by mapping plant cell wall biopolymers in a lentil stem section and compared with the FT-IR spectromicroscopy data from the same sample. The soft X-ray spectromicroscopy enables mapping of biopolymers at the sub-cellular (~30 nm resolution whereas, the limited spatial resolution in the micron scale range in the FT-IR spectromicroscopy made it difficult to identify the localized distribution of biopolymers. The advantages and limitations of soft X-ray and FT-IR spectromicroscopy techniques for biopolymer research are also discussed.

  19. Introduction of soft X-ray spectromicroscopy as an advanced technique for plant biopolymers research.

    Science.gov (United States)

    Karunakaran, Chithra; Christensen, Colleen R; Gaillard, Cedric; Lahlali, Rachid; Blair, Lisa M; Perumal, Vijayan; Miller, Shea S; Hitchcock, Adam P

    2015-01-01

    Soft X-ray absorption spectroscopy coupled with nano-scale microscopy has been widely used in material science, environmental science, and physical sciences. In this work, the advantages of soft X-ray absorption spectromicroscopy for plant biopolymer research were demonstrated by determining the chemical sensitivity of the technique to identify common plant biopolymers and to map the distributions of biopolymers in plant samples. The chemical sensitivity of soft X-ray spectroscopy to study biopolymers was determined by recording the spectra of common plant biopolymers using soft X-ray and Fourier Transform mid Infrared (FT-IR) spectroscopy techniques. The soft X-ray spectra of lignin, cellulose, and polygalacturonic acid have distinct spectral features. However, there were no distinct differences between cellulose and hemicellulose spectra. Mid infrared spectra of all biopolymers were unique and there were differences between the spectra of water soluble and insoluble xylans. The advantage of nano-scale spatial resolution exploited using soft X-ray spectromicroscopy for plant biopolymer research was demonstrated by mapping plant cell wall biopolymers in a lentil stem section and compared with the FT-IR spectromicroscopy data from the same sample. The soft X-ray spectromicroscopy enables mapping of biopolymers at the sub-cellular (~30 nm) resolution whereas, the limited spatial resolution in the micron scale range in the FT-IR spectromicroscopy made it difficult to identify the localized distribution of biopolymers. The advantages and limitations of soft X-ray and FT-IR spectromicroscopy techniques for biopolymer research are also discussed.

  20. Introduction of Soft X-Ray Spectromicroscopy as an Advanced Technique for Plant Biopolymers Research

    Science.gov (United States)

    Karunakaran, Chithra; Christensen, Colleen R.; Gaillard, Cedric; Lahlali, Rachid; Blair, Lisa M.; Perumal, Vijayan; Miller, Shea S.; Hitchcock, Adam P.

    2015-01-01

    Soft X-ray absorption spectroscopy coupled with nano-scale microscopy has been widely used in material science, environmental science, and physical sciences. In this work, the advantages of soft X-ray absorption spectromicroscopy for plant biopolymer research were demonstrated by determining the chemical sensitivity of the technique to identify common plant biopolymers and to map the distributions of biopolymers in plant samples. The chemical sensitivity of soft X-ray spectroscopy to study biopolymers was determined by recording the spectra of common plant biopolymers using soft X-ray and Fourier Transform mid Infrared (FT-IR) spectroscopy techniques. The soft X-ray spectra of lignin, cellulose, and polygalacturonic acid have distinct spectral features. However, there were no distinct differences between cellulose and hemicellulose spectra. Mid infrared spectra of all biopolymers were unique and there were differences between the spectra of water soluble and insoluble xylans. The advantage of nano-scale spatial resolution exploited using soft X-ray spectromicroscopy for plant biopolymer research was demonstrated by mapping plant cell wall biopolymers in a lentil stem section and compared with the FT-IR spectromicroscopy data from the same sample. The soft X-ray spectromicroscopy enables mapping of biopolymers at the sub-cellular (~30 nm) resolution whereas, the limited spatial resolution in the micron scale range in the FT-IR spectromicroscopy made it difficult to identify the localized distribution of biopolymers. The advantages and limitations of soft X-ray and FT-IR spectromicroscopy techniques for biopolymer research are also discussed. PMID:25811457

  1. CRYOTHERAPY: A NEW TECHNIQUE TO OBTAIN GRAPEVINE PLANTS FREE OF VIRUSES

    Directory of Open Access Journals (Sweden)

    JEAN CARLOS BETTONI

    2016-01-01

    Full Text Available ABSTRACT Through in vitro tissue culture techniques it is possible to propagate high quality nursery plants faster. Cryotherapy is a promising tool, based on in vitro culture techniques, for achieving in a short time, high frequency of regenerating plants free of viruses. The objective of this review is to present and analyze the results of research conducted in cryotherapy methods based on cryopreservation protocols for recovery of cultivars free of micro-organisms with potential agronomic interest. The main methods employed in cryotherapy are encapsulation-dehydration, vitrification, encapsulation-vitrification and droplet vitrification, which are based on the immersion of preconditioned shoot tips in liquid nitrogen, followed by their recovery in vitro on to culture media for regeneration of healthy plantlets. Improvements to cryotherapy protocols used for grapevine are still needed, since there are variations in response according to the genotype. The published research mostly relates to Vitis vinifera and the few studies applied to other species show that the protocols need to be improved. This specificity goes beyond species, with different responses among cultivars, limiting the broader application of the technology. On the other hand, traditional methods used for virus removal from infected plant materials also have limitations and therefore investment in research for the development and application of cryopreservation techniques is highly justified, considering its efficiency and low-cost, once the protocols are developed. High frequency of virus-free plants among regenerants within a short time frame is the most desirable aspect of cryotherapy. Therefore, these advantages make the technique a promising tool for institutions mandated to the development of high-health planting materials with high genetic and agronomic potential for viticulture.

  2. In vitro pharmacodynamic evaluation of antiviral medicinal plants using a vector-based assay technique.

    Science.gov (United States)

    Esimone, C O; Grunwald, T; Wildner, O; Nchinda, G; Tippler, B; Proksch, P; Uberla, K

    2005-01-01

    Medicinal plants are increasingly being projected as suitable alternative sources of antiviral agents. The development of a suitable in vitro pharmacodynamic screening technique could contribute to rapid identification of potential bioactive plants and also to the standardization and/or pharmacokinetic-pharmacodynamic profiling of the bioactive components. Recombinant viral vectors (lentiviral, retroviral and adenoviral) transferring the firefly luciferase gene were constructed and the inhibition of viral vector infectivity by various concentrations of plant extracts was evaluated in HeLa or Hep2 cells by measuring the changes in luciferase activity. Cytotoxicity of the extracts was evaluated in parallel on HeLa or Hep2 cells stably expressing luciferase. Amongst the 15 extracts screened, only the methanol (ME) and the ethyl acetate (ET) fractions of the lichen, Ramalina farinacea specifically reduced lentiviral and adenoviral infectivity in a dose-dependent manner. Further, chromatographic fractionation of ET into four fractions (ET1-ET4) revealed only ET4 to be selectively antiviral with an IC50 in the 20 microg ml(-1) range. Preliminary mechanistic studies based on the addition of the extracts at different time points in the viral infection cycle (kinetic studies) revealed that the inhibitory activity was highest if extract and vectors were preincubated prior to infection, suggesting that early steps in the lentiviral or adenoviral replication cycle could be the major target of ET4. Inhibition of wild-type HIV-1 was also observed at a 10-fold lower concentration of the extract. The vector-based assay is a suitable in vitro pharmacodynamic evaluation technique for antiviral medicinal plants. The technique has successfully demonstrated the presence of antiviral principles in R. farinacea. Potential anti-HIV medicinal plants could rapidly be evaluated with the reported vector-based technique. The lichen, R. farinacea could represent a lead source of antiviral

  3. Applied combustion

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-12-31

    From the title, the reader is led to expect a broad practical treatise on combustion and combustion devices. Remarkably, for a book of modest dimension, the author is able to deliver. The text is organized into 12 Chapters, broadly treating three major areas: combustion fundamentals -- introduction (Ch. 1), thermodynamics (Ch. 2), fluid mechanics (Ch. 7), and kinetics (Ch. 8); fuels -- coal, municipal solid waste, and other solid fuels (Ch. 4), liquid (Ch. 5) and gaseous (Ch. 6) fuels; and combustion devices -- fuel cells (Ch. 3), boilers (Ch. 4), Otto (Ch. 10), diesel (Ch. 11), and Wankel (Ch. 10) engines and gas turbines (Ch. 12). Although each topic could warrant a complete text on its own, the author addresses each of these major themes with reasonable thoroughness. Also, the book is well documented with a bibliography, references, a good index, and many helpful tables and appendices. In short, Applied Combustion does admirably fulfill the author`s goal for a wide engineering science introduction to the general subject of combustion.

  4. Applying machine learning techniques for forecasting flexibility of virtual power plants

    DEFF Research Database (Denmark)

    MacDougall, Pamela; Kosek, Anna Magdalena; Bindner, Henrik W.

    2016-01-01

    hidden layer artificial neural network (ANN). Both techniques are used to model a relationship between the aggregator portfolio state and requested ramp power to the longevity of the delivered flexibility. Using validated individual household models, a smart controlled aggregated virtual power plant...... is simulated. A hierarchical market-based supply-demand matching control mechanism is used to steer the heating devices in the virtual power plant. For both the training and validation set of clusters, a random number of households, between 200 and 2000, is generated with day ahead profile scaled accordingly...

  5. Development of Methane and Nitrous Oxide Emission Factors for the Biomass Fired Circulating Fluidized Bed Combustion Power Plant

    Directory of Open Access Journals (Sweden)

    Chang-Sang Cho

    2012-01-01

    Full Text Available This study makes use of this distinction to analyze the exhaust gas concentration and fuel of the circulating fluidized bed (CFB boiler that mainly uses wood biomass, and to develop the emission factors of Methane (CH4, Nitrous oxide (N2O. The fuels used as energy sources in the subject working sites are Wood Chip Fuel (WCF, RDF and Refused Plastic Fuel (RPF of which heating values are 11.9 TJ/Gg, 17.1 TJ/Gg, and 31.2 TJ/Gg, respectively. The average concentrations of CH4 and N2O were measured to be 2.78 ppm and 7.68 ppm, respectively. The analyzed values and data collected from the field survey were used to calculate the emission factor of CH4 and N2O exhausted from the CFB boiler. As a result, the emission factors of CH4 and N2O are 1.4 kg/TJ (0.9–1.9 kg/TJ and 4.0 kg/TJ (2.9–5.3 kg/TJ within a 95% confidence interval. Biomass combined with the combustion technology for the CFB boiler proved to be more effective in reducing the N2O emission, compared to the emission factor of the CFB boiler using fossil fuel.

  6. Development of methane and nitrous oxide emission factors for the biomass fired circulating fluidized bed combustion power plant.

    Science.gov (United States)

    Cho, Chang-Sang; Sa, Jae-Hwan; Lim, Ki-Kyo; Youk, Tae-Mi; Kim, Seung-Jin; Lee, Seul-Ki; Jeon, Eui-Chan

    2012-01-01

    This study makes use of this distinction to analyze the exhaust gas concentration and fuel of the circulating fluidized bed (CFB) boiler that mainly uses wood biomass, and to develop the emission factors of Methane (CH(4)), Nitrous oxide (N(2)O). The fuels used as energy sources in the subject working sites are Wood Chip Fuel (WCF), RDF and Refused Plastic Fuel (RPF) of which heating values are 11.9 TJ/Gg, 17.1 TJ/Gg, and 31.2 TJ/Gg, respectively. The average concentrations of CH(4) and N(2)O were measured to be 2.78 ppm and 7.68 ppm, respectively. The analyzed values and data collected from the field survey were used to calculate the emission factor of CH(4) and N(2)O exhausted from the CFB boiler. As a result, the emission factors of CH(4) and N(2)O are 1.4 kg/TJ (0.9-1.9 kg/TJ) and 4.0 kg/TJ (2.9-5.3 kg/TJ) within a 95% confidence interval. Biomass combined with the combustion technology for the CFB boiler proved to be more effective in reducing the N(2)O emission, compared to the emission factor of the CFB boiler using fossil fuel.

  7. SVM and ANN Based Classification of Plant Diseases Using Feature Reduction Technique

    Directory of Open Access Journals (Sweden)

    Jagadeesh D.Pujari

    2016-06-01

    Full Text Available Computers have been used for mechanization and automation in different applications of agriculture/horticulture. The critical decision on the agricultural yield and plant protection is done with the development of expert system (decision support system using computer vision techniques. One of the areas considered in the present work is the processing of images of plant diseases affecting agriculture/horticulture crops. The first symptoms of plant disease have to be correctly detected, identified, and quantified in the initial stages. The color and texture features have been used in order to work with the sample images of plant diseases. Algorithms for extraction of color and texture features have been developed, which are in turn used to train support vector machine (SVM and artificial neural network (ANN classifiers. The study has presented a reduced feature set based approach for recognition and classification of images of plant diseases. The results reveal that SVM classifier is more suitable for identification and classification of plant diseases affecting agriculture/horticulture crops.

  8. Pulsating combustion - Combustion characteristics and reduction of emissions

    Energy Technology Data Exchange (ETDEWEB)

    Lindholm, Annika

    1999-11-01

    In the search for high efficiency combustion systems pulsating combustion has been identified as one of the technologies that potentially can meet the objectives of clean combustion and good fuel economy. Pulsating combustion offers low emissions of pollutants, high heat transfer and efficient combustion. Although it is an old technology, the interest in pulsating combustion has been renewed in recent years, due to its unique features. Various applications of pulsating combustion can be found, mainly as drying and heating devices, of which the latter also have had commercial success. It is, however, in the design process of a pulse combustor, difficult to predict the operating frequency, the heat release etc., due to the lack of a well founded theory of the phenomenon. Research concerning control over the combustion process is essential for developing high efficiency pulse combustors with low emissions. Natural gas fired Helmholtz type pulse combustors have been the experimental objects of this study. In order to investigate the interaction between the fluid dynamics and the chemistry in pulse combustors, laser based measuring techniques as well as other conventional measuring techniques have been used. The experimental results shows the possibilities to control the combustion characteristics of pulsating combustion. It is shown that the time scales in the large vortices created at the inlet to the combustion chamber are very important for the operation of the pulse combustor. By increasing/decreasing the time scale for the large scale mixing the timing of the heat release is changed and the operating characteristics of the pulse combustor changes. Three different means for NO{sub x} reduction in Helmholtz type pulse combustors have been investigated. These include exhaust gas recirculation, alteration of air/fuel ratio and changed inlet geometry in the combustion chamber. All used methods achieved less than 10 ppm NO{sub x} emitted (referred to stoichiometric

  9. Alcohol combustion chemistry

    KAUST Repository

    Sarathy, Mani

    2014-10-01

    Alternative transportation fuels, preferably from renewable sources, include alcohols with up to five or even more carbon atoms. They are considered promising because they can be derived from biological matter via established and new processes. In addition, many of their physical-chemical properties are compatible with the requirements of modern engines, which make them attractive either as replacements for fossil fuels or as fuel additives. Indeed, alcohol fuels have been used since the early years of automobile production, particularly in Brazil, where ethanol has a long history of use as an automobile fuel. Recently, increasing attention has been paid to the use of non-petroleum-based fuels made from biological sources, including alcohols (predominantly ethanol), as important liquid biofuels. Today, the ethanol fuel that is offered in the market is mainly made from sugar cane or corn. Its production as a first-generation biofuel, especially in North America, has been associated with publicly discussed drawbacks, such as reduction in the food supply, need for fertilization, extensive water usage, and other ecological concerns. More environmentally friendly processes are being considered to produce alcohols from inedible plants or plant parts on wasteland. While biofuel production and its use (especially ethanol and biodiesel) in internal combustion engines have been the focus of several recent reviews, a dedicated overview and summary of research on alcohol combustion chemistry is still lacking. Besides ethanol, many linear and branched members of the alcohol family, from methanol to hexanols, have been studied, with a particular emphasis on butanols. These fuels and their combustion properties, including their ignition, flame propagation, and extinction characteristics, their pyrolysis and oxidation reactions, and their potential to produce pollutant emissions have been intensively investigated in dedicated experiments on the laboratory and the engine scale

  10. Determination of mercury in an assortment of dietary supplements using an inexpensive combustion atomic absorption spectrometry technique.

    Science.gov (United States)

    Levine, Keith E; Levine, Michael A; Weber, Frank X; Hu, Ye; Perlmutter, Jason; Grohse, Peter M

    2005-01-01

    The concentrations of mercury in forty, commercially available dietary supplements, were determined using a new, inexpensive analysis technique. The method involves thermal decomposition, amalgamation, and detection of mercury by atomic absorption spectrometry with an analysis time of approximately six minutes per sample. The primary cost savings from this approach is that labor-intensive sample digestion is not required prior to analysis, further automating the analytical procedure. As a result, manufacturers and regulatory agencies concerned with monitoring lot-to-lot product quality may find this approach an attractive alternative to the more classical acid-decomposition, cold vapor atomic absorption methodology. Dietary supplement samples analyzed included astragalus, calcium, chromium picolinate, echinacea, ephedra, fish oil, ginger, ginkgo biloba, ginseng, goldenseal, guggul, senna, St John's wort, and yohimbe products. Quality control samples analyzed with the dietary supplements indicated a high level of method accuracy and precision. Ten replicate preparations of a standard reference material (NIST 1573a, tomato leaves) were analyzed, and the average mercury recovery was 109% (2.0% RSD). The method quantitation limit was 0.3 ng, which corresponded to 1.5 ng/g sample. The highest found mercury concentration (123 ng/g) was measured in a concentrated salmon oil sample. When taken as directed by an adult, this product would result in an approximate mercury ingestion of 7 mug per week.

  11. Non-invasive scanning ion-selective electrode technique and its applications to the research of higher plants

    Institute of Scientific and Technical Information of China (English)

    Sun Tong; Xu Yue; Li Peng; Yu Shangguan; Yin Liping

    2007-01-01

    The process of various ions and molecules getting into and out of cells is critical for plant survival. The non-invasive scanning ion-selective electrode technique (SIET) is a non-invasive method to obtain the information of ions/molecules across membranes in plant. This technique can measure the absolute concentration of ions and molecules, and also their fluxes and directions of movement.The samples to be analyzed can be a single cell, a piece of tissue, a whole organ and even an intact seedling. This article reviews the recent progress made in plant physiology by using this technique and discusses its potentials in future studies on plant physiology.

  12. Availability assessment and risk assessment regarding handling and preparation of biomass in combustion plants; Tillgaenglighets- och riskbedoemning av system foer hantering och beredning av biobraensle i foerbraenningsanlaeggningar

    Energy Technology Data Exchange (ETDEWEB)

    Biguen, Helen; Bodlund, Gunnar; Dahlloef, Lars; Pettersson, Lars [SwedPower, Stockholm (Sweden)

    2005-04-01

    tools to identify measures for improvements and rehabilitation and identifying changes on the risk picture by e.g. changing of fuel or legislation. Accomplishment To describe the methods of analyses a number of reference plants have been defined, five wood-chips fired plants and one wood-dust fired plant. The ambition of the choice of reference plants has been to imitate an average of existing bio fuel handling plants without pointing out any specific plant. Basic input to the analysis expressed as mean time between failures, mean down time, failure frequencies and failure probabilities are estimated from representative bio-fuel handling systems. Based on experience the fuel handling plant contribute to in the order of magnitude 0.5% of the total unavailability for a whole plant. In this case where same component related unavailability data are used for every reference plant it is seen that the more complexity a plant show the higher the unavailability compared to to smaller and more simple plants. At the same time the larger plants have more redundant system functions. The relation between unavailability and complexity can be seen in the diagram below, figure 1, where 'Wood ships 5' has significant greater amount of separate feeding for fuel to the boiler. Independent evaluations has been done on how the size of bio-fuel storage and manning influence availability for the fuel handling plant. The analyses shows that for reference plants a intermediate fuel storage with capacity corresponding to at least 4 hours full load operation has positive influence for availability. At the same time results shows that continuous manning have no significant effect on availability. The probability risk analysis is developed from activities as aviation and nuclear power, activities with big demands on identifying and reducing risks. The risk for fire or explosion in two reference plants are analysed with fault tree technique. The sequences of events with potential for fire

  13. Amended EC Directive on the limitation of emissions of certain pollutants into the air from large combustion plants. Implications for German power plants; Neue EG-Richtlinie fuer Grossfeuerungsanlagen. Folgerungen fuer deutsche Kraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrand, M. [Verband der Elektrizitaetswirtschaft - VDEW - e.V., Frankfurt (Germany). Bereich Recht und Umwelt

    2002-03-11

    The article highlights the major improvements in terms of reducing emissions from large combustion plants, comparing the new limiting values and specifications with those of the former Directive. As Germany is obliged to transform the new EC Directive into national law within twelve months from its entry into force, an amendment of the respective German regulation can be expected soon. (orig./CB) [German] Mit der im Herbst 2001 durch das Europaeische Parlament und den Umweltministerrat verabschiedeten Novelle der Grossfeuerungsanlagen-Richtlinie hat die Europaeische Union einen markanten, laengst ueberfaelligen Schritt zur EU-weiten Angleichung der emissionsseitigen Anforderungen an grosse Feuerungsanlagen unternommen. Mit dem Inkrafttreten der novellierten Grossfeuerungsanlagen-Richtlinie wurde aber auch der formale Anstoss fuer eine Aktualisierung der deutschen Grossfeuerungsanlagen-Verordnung (13.BImSchV) gegeben. (orig./CB)

  14. Investigations on the emission of air pollutants from small-scale firing plants during the combustion of cereals, straw and similar plant materials; Untersuchungen zur Emission von Luftschadstoffen aus Kleinfeuerungsanlagen bei der Verbrennung von Getreide, Stroh und aehnlichen pflanzlichen Stoffen

    Energy Technology Data Exchange (ETDEWEB)

    Kalkoff, Wolf-Dieter; Maiwald, Birk; Wolf, Stephan

    2013-05-15

    The purpose of the present field study by the State Environmental Protection Office and the State Institution for Agriculture, Forestry and Horticulture of Saxony Anhalt was to measure emissions of relevant pollutants during the combustion of biogenic fuels such as cereals, straw and similar plant materials in exemplary firing installations. In spite of considerable development efforts on the part of manufacturers there are still problems to be solved with some fuels in meeting the tightened limit values of the First Emission Control Ordinance while ensuring user-friendly equipment operability. Based on these insights, as well as the experiences gained in the course of the trial programme, the recommendation for problem fuels such as straw and similar materials is to operate the boiler at full load and provide robust, amply dimensioned ash removal equipment.

  15. Innovative combination of spectroscopic techniques to reveal nanoparticle fate in a crop plant

    Science.gov (United States)

    Larue, Camille; Castillo-Michel, Hiram; Stein, Ricardo J.; Fayard, Barbara; Pouyet, Emeline; Villanova, Julie; Magnin, Valérie; Pradas del Real, Ana-Elena; Trcera, Nicolas; Legros, Samuel; Sorieul, Stéphanie; Sarret, Géraldine

    2016-05-01

    Nanotechnology is the new industrial revolution of our century. Its development leads to an increasing use of nanoparticles and thus to their dissemination. Their fate in the environment is of great concern and especially their possible transfer in trophic chains might be an issue for food safety. However, so far our knowledge on this topic has been restricted by the lack of appropriate techniques to characterize their behavior in complex matrices. Here, we present in detail the use of cutting-edge beam-based techniques for nanoparticle in situ localization, quantification and speciation in a crop plant species (Lactuca sativa). Lettuce seedlings have been exposed to TiO2 and Ag nanoparticles and analyzed by inductively coupled plasma spectrometry, micro-particle induced X-ray emission coupled to Rutherford backscattering spectroscopy on nuclear microprobe, micro-X-ray fluorescence spectroscopy and X-ray absorption near edge structure spectroscopy. The benefits and drawbacks of each technique are discussed, and the types of information that can be drawn, for example on the translocation to edible parts, change of speciation within the plant, detoxification mechanisms, or impact on the plant ionome, are highlighted. Such type of coupled approach would be an asset for nanoparticle risk assessment.

  16. Control of a post-combustion CO2 capture plant during process start-up and load variations

    DEFF Research Database (Denmark)

    Gaspar, Jozsef; Jørgensen, John Bagterp; Fosbøl, Philip Loldrup

    2015-01-01

    capture. The study demonstrates that the implemented control structure keeps the carbon capture process at 90% CO2 removal rate with a deviation up to 8% during load variations. In addition, it reveals that the control structure brings the process to the desired set point in approximately 10 min during...... and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorption and desorption columns in a carbon capture plant. Moreover, we implement a decentralized proportional-integral (PI) based control scheme and we evaluate the performance of the control structure...... for various operational procedures, e.g. start-up, load changes, noise on the flue gas flow rate and composition. Note that the carbon capture plant is based on the solvent storage configuration. To the authors knowledge, this is the first paper addressing the issue of start-up operation and control of carbon...

  17. The Impact of the Bituminous Coal Combustion from the Thermoelectric Power Plant from Paroseni on the Environment of Jiu Valley

    Directory of Open Access Journals (Sweden)

    Mircea Rebrisoreanu

    2002-04-01

    Full Text Available The Jiu Valley Basin is one of the most important coal mining areas in Romania. Other industries, including a power plant, are also well developed in this area. Therefore, pollution is very high. One of the most polluted environmental compounds is the air. High mountains surround the Jiu Valley, which makes difficult the air refreshing. For this reason, it is very important to discuss the air pollution and especially that produced by dust. Since the industrial companies are concentrated in a small area, it is very difficult to identify and prosecute the polluting one. The present paper aims to identify the sources of air pollution, especially among the mining companies, because the power plant is considered the most important polluting agent in this area.

  18. Valve inlet fluid conditions for pressurizer safety and relief valves in combustion engineering-designed plants. Final report. [PWR

    Energy Technology Data Exchange (ETDEWEB)

    Bahr, J.; Chari, D.; Puchir, M.; Weismantel, S.

    1982-12-01

    The purpose of this study is to assemble documented information for C-E designed plants concerning pressurizer safety and power operated relief valve (PROV) inlet fluid conditions during actuation as calculated by conventional licensing analyses. This information is to be used to assist in the justification of the valve inlet fluid conditions selected for the testing of safety valves and PORVs in the EPRI/PWR Safety/Relief Valve Test Program. Available FSAR/Reload analyses and certain low temperature overpressurization analyses were reviewed to identify the pressurization transients which would actuate the valves, and the corresponding valve inlet fluid conditions. In addition, consideration was given to the Extended High Pressure Liquid Injection event. A general description of each pressurization transient is provided. The specific fluid conditions identified and tabulated for each C-E designed plant for each transient are peak pressurizer pressure, pressure ramp rate at actuation, temperature and fluid state.

  19. Development of a Dry Sorbent-based Post-Combustion CO2 Capture Technology for Retrofit in Existing Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Thomas; Coleman, Luke; Anderson, Matthew; Gupta, Raghubir; Herr, Joshua; Kalluri, Ranjeeth; Pavani, Maruthi

    2009-12-31

    The objective of this research and development (R&D) project was to further the development of a solid sorbent-based CO2 capture process based on sodium carbonate (i.e. the Dry Carbonate Process) that is capable of capturing>90% of the CO2 as a nearly pure stream from coal-fired power plant flue gas with <35% increase in the cost of electrictiy (ICOE).

  20. A new chromosome fluorescence banding technique combining DAPI staining with image analysis in plants.

    Science.gov (United States)

    Liu, Jing Yu; She, Chao Wen; Hu, Zhong Li; Xiong, Zhi Yong; Liu, Li Hua; Song, Yun Chun

    2004-08-01

    In this study, a new chromosome fluorescence banding technique was developed in plants. The technique combined 4',6-diamidino-2-phenylindole (DAPI) staining with software analysis including three-dimensional imaging after deconvolution. Clear multiple and adjacent DAPI bands like G-bands were obtained by this technique in the tested species including Hordeum vulgare L., Oryza officinalis, Wall & Watt, Triticum aestivum L., Lilium brownii, Brown, and Vicia faba L. During mitotic metaphase, the numbers of bands for the haploid genomes of these species were about 185, 141, 309, 456 and 194, respectively. Reproducibility analysis demonstrated that banding patterns within a species were stable at the same mitotic stage and they could be used for identifying specific chromosomes and chromosome regions. The band number fluctuated: the earlier the mitotic stage, the greater the number of bands. The technique enables genes to be mapped onto specific band regions of the chromosomes by only one fluorescence in situ hybridisation (FISH) step with no chemical banding treatments. In this study, the 45S and 5S rDNAs of some tested species were located on specific band regions of specific chromosomes and they were all positioned at the interbands with the new technique. Because no chemical banding treatment was used, the banding patterns displayed by the technique should reflect the natural conformational features of chromatin. Thus it could be expected that this technique should be suitable for all eukaryotes and would have widespread utility in chromosomal structure analysis and physical mapping of genes.

  1. Effectiveness of Low-Cost Planting Techniques for Improving Water Availability to Olea europaea Seedlings in Degraded Drylands

    OpenAIRE

    Valdecantos Dema, Alejandro; Fuentes Delgado, David; Smanis, Athanasios; Llovet López, Joan; Morcillo Juliá, Luna; Bautista Aguilar, Susana

    2014-01-01

    Reforestation projects in semiarid lands often yield poor results. Water scarcity, poor soil fertility, and structure strongly limit the survival and growth of planted seedlings in these areas. At two experimental semiarid sites, we evaluated a variety of low-cost planting techniques in order to increase water availability to plants. Treatments included various combinations of traditional planting holes; water-harvesting microcatchments; stone or plastic mulches; small waterproof sheets to in...

  2. Slipstream pilot-scale demonstration of a novel amine-based post-combustion technology for carbon dioxide capture from coal-fired power plant flue gas

    Energy Technology Data Exchange (ETDEWEB)

    Krishnamurthy, Krish R. [Linde LLC, Murray Hill, NJ (United States)

    2017-02-03

    Post-combustion CO2 capture (PCC) technology offers flexibility to treat the flue gas from both existing and new coal-fired power plants and can be applied to treat all or a portion of the flue gas. Solvent-based technologies are today the leading option for PCC from commercial coal-fired power plants as they have been applied in large-scale in other applications. Linde and BASF have been working together to develop and further improve a PCC process incorporating BASF’s novel aqueous amine-based solvent technology. This technology offers significant benefits compared to other solvent-based processes as it aims to reduce the regeneration energy requirements using novel solvents that are very stable under the coal-fired power plant feed gas conditions. BASF has developed the desired solvent based on the evaluation of a large number of candidates. In addition, long-term small pilot-scale testing of the BASF solvent has been performed on a lignite-fired flue gas. In coordination with BASF, Linde has evaluated a number of options for capital cost reduction in large engineered systems for solvent-based PCC technology. This report provides a summary of the work performed and results from a project supported by the US DOE (DE-FE0007453) for the pilot-scale demonstration of a Linde-BASF PCC technology using coal-fired power plant flue gas at a 1-1.5 MWe scale in Wilsonville, AL at the National Carbon Capture Center (NCCC). Following a project kick-off meeting in November 2011 and the conclusion of pilot plant design and engineering in February 2013, mechanical completion of the pilot plant was achieved in July 2014, and final commissioning activities were completed to enable start-up of operations in January 2015. Parametric tests were performed from January to December 2015 to determine optimal test conditions and evaluate process performance over a variety of operation parameters. A long-duration 1500-hour continuous test campaign was performed from May to

  3. A simulation benchmark to evaluate the performance of advanced control techniques in biological wastewater treatment plants

    Directory of Open Access Journals (Sweden)

    Sotomayor O.A.Z.

    2001-01-01

    Full Text Available Wastewater treatment plants (WWTP are complex systems that incorporate a large number of biological, physicochemical and biochemical processes. They are large and nonlinear systems subject to great disturbances in incoming loads. The primary goal of a WWTP is to reduce pollutants and the second goal is disturbance rejection, in order to obtain good effluent quality. Modeling and computer simulations are key tools in the achievement of these two goals. They are essential to describe, predict and control the complicated interactions of the processes. Numerous control techniques (algorithms and control strategies (structures have been suggested to regulate WWTP; however, it is difficult to make a discerning performance evaluation due to the nonuniformity of the simulated plants used. The main objective of this paper is to present a benchmark of an entire biological wastewater treatment plant in order to evaluate, through simulations, different control techniques. This benchmark plays the role of an activated sludge process used for removal of organic matter and nitrogen from domestic effluents. The development of this simulator is based on models widely accepted by the international community and is implemented in Matlab/Simulink (The MathWorks, Inc. platform. The benchmark considers plant layout and the effects of influent characteristics. It also includes a test protocol for analyzing the open and closed-loop responses of the plant. Examples of control applications in the benchmark are implemented employing conventional PI controllers. The following common control strategies are tested: dissolved oxygen (DO concentration-based control, respirometry-based control and nitrate concentration-based control.

  4. Power plant technology 2014. Strategies, systems engineering and operation; Kraftwerkstechnik 2014. Strategien, Anlagentechnik und Betrieb

    Energy Technology Data Exchange (ETDEWEB)

    Beckmann, Michael; Hurtado, Antonio

    2014-07-01

    The book on power plant technology 2014 (strategies, systems engineering and operation) covers the following issues: Climate, politics and economy; wind power; fossil-fuel power plants, flexible power plants - plant operation, flexible power plants- materials, materials for energy technology, fuel feed and incineration, modeling of the water-vapor-circuit, corrosion, deposits and cleaning, vapor turbines, GUD power plants, fluidized bed combustion, energetic biomass use, combined heat and power generation and decentralized units, storage facilities, emissions - mitigation and measuring techniques.

  5. Case study of an MBT plant producing SRF for cement kiln co-combustion, coupled with a bioreactor landfill for process residues.

    Science.gov (United States)

    Grosso, Mario; Dellavedova, Stefano; Rigamonti, Lucia; Scotti, Sergio

    2016-01-01

    The paper describes the performances of the energy recovery pathway from the residual waste based on the production of a Solid Recovered Fuel (SRF) to be exploited via co-combustion in a cement kiln. The SRF is produced in a single stream Mechanical-Biological Treatment plant, where bio-drying of the waste is followed by mechanical refining in order to fulfil the quality requirements by the cement kilns. Peculiar of this MBT is the fact that sorting residues are disposed in a nearby landfill, managed according to a bioreactor approach, where landfill gas is collected for electric energy recovery. A detailed mass and energy balance of the system is presented based on one year operational data, followed by its Life Cycle Assessment. Results show that the system is energetically and environmentally effective, with most of the impacts being more than compensated by the savings of materials and energy. Major role in determining such outcome is the displacement of petcoke in the cement kiln, both in terms of its fossil CO2 emissions and of its life cycle impacts, including the trans-oceanic transport. To check the robustness of the results, two sensitivity analyses are performed on the landfill gas collection efficiency and on the avoided electric energy mix.

  6. The Measurement Handbook of the Thermal Engineering Research Institute, 3. edition, 2005[Measurement of emissions from combustion plants]; Vaermeforsks Maethandbok Utgaava 3, 2005

    Energy Technology Data Exchange (ETDEWEB)

    Gustavsson, Lennart; Nyquist, Gunnar

    2005-09-01

    The objectives of the measurement handbook is to give recommendations for performing measurements on emissions from combustion plants in a way to produce relevant and consistent results. The handbook gives advice on planning, preparation and performance of emission measurements as well as descriptions of methods for measurement for about twenty components of the flue gas and some physical parameters. Descriptions of measuring methods are based on on the European and/or international standards but are supplemented with experiences from applications of the standards and are described in a uniform way, For each method, the following steps are described: objective, area of application, measuring principle, equipment, performance, analysis and evaluation, experiences, limitations and measurement uncertainties. It is hoped the the handbook will be used both as a practical guide and as a reference. Advice on the measurement of flue gas flux and temperature, and furnace temperature are given and on how sampling of fuel and ashes should be done. The book has separate chapters for EU-directives, quality assurance of automatic measuring systems, calculation of measurement accuracy and validation of alternative measurement methods. Ths third edition has been updated on a number of subjects.

  7. Dry NO/sub x/ separation, preferably for fluidized bed combustion plant. Trockentechnische NO/sub x/-Abscheidung vorzugsweise fuer Wirbelbett-Feuerungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Hoelter, H.; Igelbuescher, H.; Gresch, H.; Dewert, H.

    1987-05-14

    The main patent application P 3534228.5 describes how, preferably in fluidized bed combustion plant, porous free-flying bodies are added in the gas flow above the flames in a boiler, where these free-flying bodies form a regular contact mist wall in the waste gas and, provided with means of reduction, cause NO/sub x/ reduction. Surprisingly, it has now been found that the desired effect can be considerably improved if the porous free-flying bodies contain means of absorption and/or reduction and/or are immersed in these, depending on the SO/sub 2/ and NO/sub x/ loading of the stack gas. It is advantageous if the free-flying bodies for NO/sub x/ reduction are soaked and/or surrounded by ammonium salts. For SO/sub 2/ and NO/sub x/ separation, the free-flying bodies are soaked in and/or surrounded by lime hydrate and ammonium salts.

  8. Differential behaviour of combustion and gasification fly ash from Puertollano Power Plants (Spain) for the synthesis of zeolites and silica extraction.

    Science.gov (United States)

    Font, O; Moreno, N; Díez, S; Querol, X; López-Soler, A; Coca, P; Peña, F García

    2009-07-15

    Coal gasification (IGCC) and pulverised coal combustion (PCC) fly ashes (FAs), obtained from two power plants fed with the carboniferous bituminous coal from Puertollano (Spain), were characterised and used as raw materials for zeolite synthesis by direct conversion (DC) and by alkaline fusion (Fu), and SiO2 extraction (Si-Ex) at laboratory scale. The Puertollano FAs are characterised by a high SiO2 content (59%) with respect to EU coal FAs. High zeolite synthesis yields were obtained from both FAs by using conventional alkaline activation. However, the Si extraction yields were very different. The results of the zeolite synthesis from the Si-bearing extracts from both FAs demonstrated that high purity zeolites with high cation exchange capacity (CEC, between 4.3 and 5.3meq/g) can be produced. The solid residue arising from Si-Ex is also a relatively high NaP1 zeolite product (CEC 2.4-2.7 meq/g) equivalent to the DC products. The zeolitic materials synthesised from both FAs by Fu showed an intermediate (between the high purity zeolites and the DC products) zeolite content with CEC values from 3.4 to 3.7 meq/g. Low leachable metal contents were obtained from high purity A and X zeolites and zeolite material synthesised by Fu for PCC FA.

  9. Bioimaging techniques for subcellular localization of plant hemoglobins and measurement of hemoglobin-dependent nitric oxide scavenging in planta.

    Science.gov (United States)

    Hebelstrup, Kim H; Østergaard-Jensen, Erik; Hill, Robert D

    2008-01-01

    Plant hemoglobins are ubiquitous in all plant families. They are expressed at low levels in specific tissues. Several studies have established that plant hemoglobins are scavengers of nitric oxide (NO) and that varying the endogenous level of hemoglobin in plant cells negatively modulates bioactivity of NO generated under hypoxic conditions or during cellular signaling. Earlier methods for determination of hemoglobin-dependent scavenging in planta were based on measuring activity in whole plants or organs. Plant hemoglobins do not contain specific organelle localization signals; however, earlier reports on plant hemoglobin have demonstrated either cytosolic or nuclear localization, depending on the method or cell type investigated. We have developed two bioimaging techniques: one for visualization of hemoglobin-catalyzed scavenging of NO in specific cells and another for visualization of subcellular localization of green fluorescent protein-tagged plant hemoglobins in transformed Arabidopsis thaliana plants.

  10. The PFBC Power Plant of Escatron; Proyecto de Demostracion de la Combustion en Lecho Fuido a Presion Central Termica de Escatron

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    The Escatron Pressurized Fluidized Bed Combustion Demonstration Plant was led by ENDESA which set out on the Project with its own specific objectives, and also have involved contributions from designers and suppliers, as ABB and BWE. The project objectives may be defined as follows: To make progress in the development of clean and efficient technology applicable to a wide range of coal types, specially to the peculiar Spanish black lignites. To be able to design and manufacture a new technology in the contest of European Union, specially developing capacity in Spain. All this give rise to a framework which took shape in the Escatron Project Monitoring Committee. Sulphur retention in PFBC technology has proved to be efficient, with levels higher than 90%. The nitric oxides emissions fall within limits set by present regulations. It is likely that more restrictive regulations in the future, will require the consideration of injecting ammonium technic over free-chamber bed. The most significant problem is that the flue gas from the cyclones to the gas turbine, has a high dust content. The cleaning system for this gas should be improved, and the best option appear to be the introduction of ceramic filters. The new plants could be built at higher power, as should be 300-400 MWe, operating with higher pressure (16 bar). This option together with better steam conditions, gives rise to a better energy yields and competitive electric energy production. But we should not dimis more proved designs of 100-200 MWe, as an interesting modular solution. (Author)

  11. Enhanced Nitrogen and Phosphorus Removal by Woody Plants with Deep-Planting Technique for the Potential Environmental Management of Carcass Burial Sites

    Directory of Open Access Journals (Sweden)

    Byoung-Hwan Seo

    2017-01-01

    Full Text Available Phytoremediation is a promising technology to remediate carcass burial sites where deep soil layers are contaminated with nitrogen (N, phosphorus (P and other potential contaminants by leachate. The current study was conducted to examine the remedial efficiency of two different woody plants, poplar (Populus euramericana and willow (Salix alba, by employing the deep-planting technique for the enhanced removal of N and P for the soil affected by leachate. For this, pot trials to assess N and P removal efficiency of poplar and willow in liquid manure-applied soil, and pilot-scale column experiments to evaluate the suitability of the deep-planting technique for the enhanced phytoremediation of deep soil layer were conducted. The results of this study showed that poplar and willow removed N and P from soils effectively while surviving under deep-planting conditions. Notably, compared to the surface planted roots, the roots of the deep-planted poplar and willow could transfer significant amounts of N and P leachate from the deep soil layer to the rhizosphere, from where it can be absorbed by the plants. For the first time, the use of poplar or willow plants are recommended by employing the deep-planting technique for the successful remediation of carcass burial sites.

  12. Turbulent combustion

    Energy Technology Data Exchange (ETDEWEB)

    Talbot, L.; Cheng, R.K. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    Turbulent combustion is the dominant process in heat and power generating systems. Its most significant aspect is to enhance the burning rate and volumetric power density. Turbulent mixing, however, also influences the chemical rates and has a direct effect on the formation of pollutants, flame ignition and extinction. Therefore, research and development of modern combustion systems for power generation, waste incineration and material synthesis must rely on a fundamental understanding of the physical effect of turbulence on combustion to develop theoretical models that can be used as design tools. The overall objective of this program is to investigate, primarily experimentally, the interaction and coupling between turbulence and combustion. These processes are complex and are characterized by scalar and velocity fluctuations with time and length scales spanning several orders of magnitude. They are also influenced by the so-called {open_quotes}field{close_quotes} effects associated with the characteristics of the flow and burner geometries. The authors` approach is to gain a fundamental understanding by investigating idealized laboratory flames. Laboratory flames are amenable to detailed interrogation by laser diagnostics and their flow geometries are chosen to simplify numerical modeling and simulations and to facilitate comparison between experiments and theory.

  13. Plastics wastes as secondary fuel in a cement plant; Residuos plasticos como combustible secundario en una cementera

    Energy Technology Data Exchange (ETDEWEB)

    Miguel, R.; Irasarri, L.; Arnaiz, S.; Cacho, I.

    2000-07-01

    The use of secondary fuel derived from plastics wastes from municipal source has been tested in an industrial cement plant. The recovered materials have been conditioned in order to fulfill the texture, composition and energetic requirements of the cement kiln. The performed long-term trials have shown the stability of the industrial facility during the operation with this alternative fuels. Several controls carried out over gaseous emissions confirmed the absence of differences in the emitted pollutant levels when compared with normal operation. The quality of the obtained clinker, checked using the established standard measurements, was found identical to the one in a clinker prepared using conventional fuels. The LCA (Life Cycle Analysis) tool was applied to evaluate a series of environmental impacts and proved that the energetic valorization alternative is more favourable then the disposal practice. Finally, a positive economical balance reinforced the option of energy recovery previously supported by favourable technical and environmental considerations. (Author) 16 refs.

  14. Study of operation optimization based on data mining technique in power plants

    Institute of Scientific and Technical Information of China (English)

    LI Jianqiang; LIU Jizhen; GU Junjie; NIU Chenglin

    2007-01-01

    The determination of operation optimization value is very important for economic analysis and operation optimization in power plants.The operation optimization value determined by traditional methods usually cannot reflect the actual running states correctly in power plants with the increase in running time.Based on a large amount of history data stored in power plants,a way of operation optimization by applying data mining technique is proposed.The structure of operation optimi-zation based on data mining is established and the fuzzy association rule mining algorithm is introduced to find the operation optimization target value to guide the operation in power plants.Based on the actual local data in a 300 MW unit,the operation optimization value in typical load ranges is found out by data mining to provide better adjustment guidance in industry process.Experimental results show that the determination of operation optimization value based on data mining can improve the efficiency and decrease the emission of pollutants.

  15. Characterization of plant food allergens: an overview on physicochemical and immunological techniques.

    Science.gov (United States)

    Harrer, Andrea; Egger, Matthias; Gadermaier, Gabriele; Erler, Anja; Hauser, Michael; Ferreira, Fátima; Himly, Martin

    2010-01-01

    Allergy to plant-derived foods is a highly complex disorder with clinical manifestations ranging from mild oral, gastrointestinal, and cutaneous symptoms to life-threatening systemic conditions. This heterogeneity in clinical manifestations has been attributed to different properties of allergenic molecules. Based on this fact, symptom elicitors were grouped into class I and pollinosis-associated class II food allergens, but clear distinction is rather ambiguous. Moreover, mechanisms underlying food sensitization are not fully understood yet, and food allergy management most often relies on patient's compliance to avoid suspected foods. Therefore, recent efforts aim at the investigation of plant food allergies at the molecular level. This review provides an overview on currently available techniques for allergen characterization and discusses their application for investigation of plant food allergens. Data obtained by an array of physicochemical analyses, such as allergen structure, integrity, aggregation, and stability, need to be linked to results from immunological methods at the level of IgE and T-cell reactivity. Such knowledge allows the development of computational algorithms to predict allergenicity of novel foods being introduced by biotechnological industry. Furthermore, molecular characterization is an indispensable tool for molecule-based diagnosis and future development of safer patient-tailored specific immunotherapy in plant food allergy.

  16. Technique for Selecting Optimum Fan Compression Ratio based on the Effective Power Plant Parameters

    Directory of Open Access Journals (Sweden)

    I. I. Kondrashov

    2016-01-01

    Full Text Available Nowadays, civilian aircrafts occupy the major share of global aviation industry market. As to medium and long - haul aircrafts, turbofans with separate exhaust streams are widely used. Here, fuel efficiency is the main criterion of this engine. The paper presents the research results of the mutual influence of fan pressure ratio and bypass ratio on the effective specific fuel consumption. Shows the increasing bypass ratio to be a rational step for reducing the fuel consumption. Also considers the basic features of engines with a high bypass ratio. Among the other working process parameters, fan pressure ratio and bypass ratio are the most relevant for consideration as they are the most structural variables at a given level of technical excellence. The paper presents the dependence of the nacelle drag coefficient on the engine bypass ratio. For computation were adopted the projected parameters of prospective turbofans to be used in the power plant of the 180-seat medium-haul aircraft. Computation of the engine cycle was performed in Mathcad using these data, with fan pressure ratio and bypass ratio being varied. The combustion chamber gas temperature, the overall pressure ratio and engine thrust remained constant. Pressure loss coefficients, the efficiency of the engine components and the amount of air taken for cooling also remained constant. The optimal parameters corresponding to the minimum effective specific fuel consumption were found as the result of computation. The paper gives recommendations for adjusting optimal parameters, depending on the considered external factors, such as weight of engine and required fuel reserve. The obtained data can be used to estimate parameters of future turbofan engines with high bypass ratio.

  17. Design of Critical Control Systems for Non-Minimum Phase Plants via LTR Technique

    Science.gov (United States)

    Ishihara, Tadashi; Ono, Takahiko

    An application of the loop transfer recovery (LTR) technique to critical control systems design is proposed for non-minimum phase plants. The controller structure is chosen as the Davison type integral controller with the Kalman filter. First, a critical control system is designed on the assumption that the state of the minimum phase part of the plant can be used for the feedback. A quadratic performance index with tuning parameters is used for determining the partial state feedback gain matrix. Second, the Kalman filter gain matrix is determined such that the output feedback controller performs as in the partial state feedback controller. The formal partial loop recovery procedure using the Riccati equation is adopted for this purpose. The proposed design method requires much simpler numerical search than the conventional one-step approach. An illustrative design example is presented.

  18. Ecophysiological and biochemical traits of three herbaceous plants growing on the disposed coal combustion fly ash of different weathering stage

    Directory of Open Access Journals (Sweden)

    Gajić Gordana

    2013-01-01

    Full Text Available The ecophysiological and biochemical traits of Calamagrostis epigejos (Roth. Festuca rubra L. and Oenothera biennis L. growing on two fly ash lagoons of different weathering stage (L1-3 years and L2-11 years of the “Nikola Tesla- A” thermoelectric plant (Obrenovac, Serbia were studied. Species-dependent variations were observed at the L1 lagoon; the greatest vitality (Fv/Fm and Fm/Fo followed by higher photopigment and total phenolic contents were measured in O. biennis in relation to C. epigejos (p<0.001 and F. rubra (p<0.001. At the L2 site, higher vitality was found in O. biennis (p<0.001 and F. rubra (p<0.01 compared to C. epigejos. O. biennis had the highest photosynthetic capacity. The results obtained in this study indicate that all examined species maintained a level of photosynthesis that allowed them to survive and grow under the stressful conditions in ash lagoons, albeit with lower than optimal success. [Projekat Ministarstva nauke Republike Srbije, br. 173018

  19. Evaluation of the new vacuum infiltration vitrification (viv) cryopreservation technique for native Australian plant shoot tips.

    Science.gov (United States)

    Funnekotter, Bryn; Whiteley, Susan E; Turner, Shane R; Bunn, Eric; Mancera, Ricardo L

    2015-01-01

    The application of a vacuum during the incubation in cryoprotective agents such as PVS2 allows for increased penetration, reducing total incubation times required before vitrification and post-cryopreservation regeneration is achieved. This study compared a conventional droplet-vitrification protocol to the new vacuum infiltration vitrification protocol in four Australian plant species. The new vacuum infiltration vitrification applied an 80 kPa vacuum during incubations in loading solution and PVS2. Infiltration of the cryoprotective agents into shoot tips was determined by differential scanning calorimetry measuring ice formation in the thermographs comparing a range of loading solution and PVS2 incubation times. The application of the vacuum infiltration vitrification technique resulted in a significantly reduced PVS2 incubation time for cryogenic survival and regeneration for all four species, reducing the time needed to adequately protect shoot tips by half to a quarter when compared to a conventional droplet-vitrification technique.

  20. Oxy Coal Combustion at the US EPA

    Science.gov (United States)

    Oxygen enriched coal (oxy-coal) combustion is a developing, and potentially a strategically key technology intended to accommodate direct CO2 recovery and sequestration. Oxy-coal combustion is also intended for retrofit application to existing power plants. During oxy-coal comb...

  1. Seed germination of medicinal plant, fennel (Foeniculum vulgare Mill), as affected by different priming techniques.

    Science.gov (United States)

    Tahaei, Amirreza; Soleymani, Ali; Shams, Majid

    2016-09-01

    Reduced seed germination is among the most important factors adversely affecting crop stand and subsequent plant growth. Fennel (Foeniculum vulgare Mill) is an important medicinal plant with poor seed germination rate, occasionally. It is accordingly pertinent to find methods which can enhance fennel seed germination and remove the barriers of dormancy breaking. The present experiments studied the effects of two different priming (cold moist stratification and osmopriming) and 14 dormancy breaking techniques (hormonal, osmopriming, biopriming, chemical priming, and hydropriming) on the seed germination and seedling growth of two different fennel genotypes under growth chamber conditions. In the first and second experiment, the priming techniques including the time lengths of cold moist stratification (0, 15, 30, and 45 days) and the concentrations of polyethylene glycol 6000 (PEG6000, osmopriming at -0.99, -1.35, and -2.33 MPa) were used as the main plots. However, in both experiments, the dormancy breaking techniques and fennel genotypes were factorially combined and used as the subplots. Different seed- and seedling-related parameters including germination (%), plumule, radicle and seedling length, average germination time, rate and homogeneity of germination, and seed vigor index were determined. Both priming techniques were efficient on the enhancement of seed germination and seedling growth. Among the dormancy breaking techniques, Aminol Forte (biopriming), kadostim (biopriming), benzyl adenine + kinetin (biopriming), distilled water (hydropriming), gibberellin + kinetin (hormonal priming), and benzyl adenine + kinetin + gibberellin (biopriming) were the most effective ones. The related concentrations were equal to 100 mg/l, 10(-5) M, and 0.4 %. The fennel genotypes reacted significantly different under priming conditions. It is possible to enhance seed germination and seedling growth of fennel using priming and dormancy breaking

  2. Recycling of coal combustion wastes.

    Science.gov (United States)

    Oz, Derya; Koca, Sabina; Koca, Huseyin

    2009-05-01

    The separation of unburned carbon from coal-fired power plant bottom ashes was conducted in order to increase the possibility of the recycling of coal combustion wastes. A two-stage flotation technique was used for this study. In the rougher flotation experiments the amounts of collector, dispersant and frother, pulp density, pH, particle size distribution, flotation time and flotation temperature were tested as variables. After rougher flotation experiments, at optimum conditions, the carbon content of the concentrate increased from 13.85 to 51.54% at a carbon recovery of 54.54%. Under the same conditions, the carbon content was reduced to 4.54% at a weight yield of over 80% in the tailings fraction. This fraction meets the industrial specifications and can be utilized as a cement additive. After the cleaner flotation experiment the carbon content of the product was enhanced to 64.81% with a 52.16% carbon recovery. This fraction can be blended back into the coal feed to the power plant boilers.

  3. Analysis of some herbal plants from India used in the control of diabetes mellitus by NAA and AAS techniques

    Energy Technology Data Exchange (ETDEWEB)

    Rajurkar, N.S.; Pardeshi, B.M. [Pune Univ., Chemistry Dept., Pune (India)

    1997-08-01

    Elemental analysis of some herbal plants used in the control of diabetes has been done by the techniques of Neutron Activation Analysis (NAA) and Atomic Absorption Spectroscopy (AAS). The elements Mn, Na, K, Cl, Al, Cu, Co, Pb, Ni, Cr, Cd, Fe, Ca, Zn and Hg are found to be present in different plants in various proportions. (Author).

  4. Classroom Modified Split-Root Technique and Its Application in a Plant Habitat Selection Experiment at the College Level

    Science.gov (United States)

    Elliott, Shannon S.; Winter, Peggy A.

    2011-01-01

    The split-root technique produces a plant with two equal root masses. Traditionally, the two root masses of the single plant are cultivated in adjacent pots with or without roots from competitors for the purpose of elucidating habitat preferences. We have tailored this technology for the classroom, adjusting protocols to match resources and time…

  5. Advanced Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R. [NETL

    2013-03-11

    The activity reported in this presentation is to provide the mechanical and physical property information needed to allow rational design, development and/or choice of alloys, manufacturing approaches, and environmental exposure and component life models to enable oxy-fuel combustion boilers to operate at Ultra-Supercritical (up to 650{degrees}C & between 22-30 MPa) and/or Advanced Ultra-Supercritical conditions (760{degrees}C & 35 MPa).

  6. Impact of ignition temperature on particle size and magnetic properties of CoFe{sub 2}O{sub 4} nanoparticles prepared by self-propagated MILD combustion technique

    Energy Technology Data Exchange (ETDEWEB)

    Kaliyamoorthy, Venkatesan; Rajan Babu, D., E-mail: drajanbabu@vit.ac.in; Saminathan, Madeswaran

    2016-11-15

    We prepared nanocrystalline CoFe{sub 2}O{sub 4} by changing its ignition temperatures, using moderate and intense low-oxygen dilution (MILD) combustion technique. The effect of ignition temperature on the particle size and its magnetic behavior was investigated by HR-TEM and VSM respectively. We observed a vast change in the structural behavior and the magnetic properties of the prepared samples. X-ray diffraction studies revealed that the resultant samples had single phase with different grain sizes from 23±5 nm to 16±5 nm, which was understood by observing the growth of the grains through heat released from the combustion reaction. FE-SEM analysis showed high porosity with heterogeneous distribution of the pore size based on the adiabatic temperature and EPMA analysis, which confirmed the elemental compositions of the prepared samples. The saturation magnetization values measured at room temperature, employing vibrating sample magnetometer (VSM) decreased gradually from 50 to 34 emu/g when the ignition temperature was increased from 243 °C to 400 °C. Some of Fe ions on the B sites moved periodically to the A sites because of quenching treatment. The presence of Fe{sup 2+} ions in the existing ferrite structure ruled the magnetic behavior of the sample, as confirmed by the Mössbauer analysis. - Highlights: • CoFe{sub 2}O{sub 4} magnetic nanoparticles were prepared by MILD combustion technique. • Structural behavior and magnetic properties were changed by ignition temperature. • Formation of ferrite complex was confirmed by using FT-IR spectroscopy. • FE-SEM image confirmed the combustion nature by exhibiting the pores and voids. • The cationic distributions were investigated by the Mössbauer analysis.

  7. Odour emissions from a waste treatment plant using an inverse dispersion technique

    Science.gov (United States)

    Schauberger, Günther; Piringer, Martin; Knauder, Werner; Petz, Erwin

    2011-03-01

    The determination of the in situ emission rate of pollution sources can often not be done directly. In the absence of emission measurements, the emission rate of the source can be assessed by an inverse dispersion technique using ambient concentration measurements and meteorological parameters as input. The dispersion model used is the Austrian regulatory Gaussian model. The method is applied to a thermal waste recycling plant. Seven chemical species (butyl acetate, benzene, ethyl acetate, toluene, m/p-xylene, o-xylene and α-pinene), are identified as odorants and measured over a period of 1½ years in the prevailing wind direction leeward of the plant. The overall odour emission rate is calculated by adding the odour emission rate of all single species, using the individual odour threshold concentration. The estimated odour emission rates range between 206 and 8950 OU s -1, caused by the wide variety of the odour thresholds of the seven species. The higher value is in the upper range of odour emission rates of modern thermal treatment plants for waste.

  8. Conservation priorities of useful plants from different techniques of collection and analysis of ethnobotanical data

    Directory of Open Access Journals (Sweden)

    Reinaldo F.P. de Lucena

    2013-03-01

    Full Text Available This study analyzes three methods of data analysis to verify which one would be more appropriate to get information aiming the conservation, selecting the use value (VU inventory in situ and conservation property index (IPC. It was developed in in Northeast Brazil, via interviewed householders (46 informants. The VU was calculated considering only the effective use of plants; the inventory in situ was made through the frequency of species occurrence in homes; and the IPC combining ethnobotanical and phytossociological data. It was observed a similar cast of the indicated species by VU and inventory in situ, being different from the IPC cast. As this study sought to analyze the best technique for species identification which were needing conservationist actions, and obtained different results among the chosen methods. It has been suggested the use of methods that unite in their analysis both ethnobotanical and ecological aspects, like in the plants list from the priority index of conservation, which demonstrated to be more efficient to identify rare species in the local vegetation. The VU and the inventory in situ are more efficient to identify the most known and used species in the communities, however without analyzing these plants in the local vegetation.

  9. Follow up of the evolution of a soil-plant system using the neutrongraphic technique

    Energy Technology Data Exchange (ETDEWEB)

    Fontes, L.; Crispim, V.R.; Lima, C.T.S., E-mail: luciano_rural@yahoo.com.b, E-mail: clima@con.ufrj.b, E-mail: verginia@con.ufrj.b [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Ferreira, F.J., E-mail: fferreira@ien.gov.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    In the Brazilian northeast region, where semiarid climate prevails the soil low humidity, restricts the growth of the roots in the soil most superficial layer. A soil-plant system consisting of aluminum pots filled with soil similar to that found in the semiarid regions was designed to follow the growth of corn and soy roots. There, the seeds are planted together with artificial seeds of hydrogel and agave, which store part of the water from irrigation and later release it in conformity with the search of the roots. Nondestructive tests through the Thermal Neutron Radiography technique were conducted, exposing for 90 minutes the soilplant system, to the neutron flux from the J-9 irradiation channel of the Argonauta/IEN/CNEN reactor. An Industrex M radiographic film from Kodak and a gadolinium sheet converter, in close contact inside an aluminum chassis, were used to obtain the neutron radiography image. Lead plates, 1 mm thick, or aluminum plates, 1 cm thick, were placed to shield the gamma radiation of the neutron beam and thus allow a better visualization of the roots inside the soil. After expositions, the radiographic films were developed and the neutron radiographic images were digitalized with a Coolpix 995 Nikon camera. The neutron radiographic images were also digitally processed using the Image Pro Plus program, version 6.2. the use of lead and aluminum filters and with the use of digital processing techniques, allowed the visualization of the main and secondary roots, even when hidden by 10 mm thick humid soil. (author)

  10. Effect of Extraction Solvent/Technique on the Antioxidant Activity of Selected Medicinal Plant Extracts

    Directory of Open Access Journals (Sweden)

    Bushra Sultana

    2009-06-01

    Full Text Available Theeffects of four extracting solvents [absolute ethanol, absolute methanol, aqueous ethanol (ethanol: water, 80:20 v/v and aqueous methanol (methanol: water, 80:20 v/v] and two extraction techniques (shaking and reflux on the antioxidant activity of extracts of barks of Azadirachta indica, Acacia nilotica, Eugenia jambolana, Terminalia arjuna, leaves and roots of Moringa oleifera, fruit of Ficus religiosa,and leaves of Aloe barbadensis were investigated. The tested plant materials contained appreciable amounts of total phenolic contents (0.31-16.5 g GAE /100g DW, total flavonoid (2.63-8.66 g CE/100g DW; reducing power at 10 mg/mL extract concentration (1.36-2.91, DPPH. scavenging capacity (37.2-86.6%, and percent inhibition of linoleic acid (66.0-90.6%. Generally higher extract yields, phenolic contents and plant material antioxidant activity were obtained using aqueous organic solvents, as compared to the respective absolute organic solvents. Although higher extract yields were obtained by the refluxing extraction technique, in general higher amounts of total phenolic contents and better antioxidant activity were found in the extracts prepared using a shaker.

  11. Effect of Tb{sup 3+} substitution on the structural and magnetic properties of M-type hexaferrites synthesized by sol-gel auto-combustion technique

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Ihsan, E-mail: muislampk@yahoo.com [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Islam, M.U. [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Awan, M.S. [Center for Micro and Nano Devices, Department of Physics, COMSATS Institute of Information Technology, Islamabad (Pakistan); Ahmad, Mukhtar [Department of Physics, Bahauddin Zakariya University, Multan 60800 (Pakistan); Ashiq, Muhammad Naeem [Institute of Chemical Sciences, Bahauddin Zakariya University, Multan 60800 (Pakistan); Naseem, Shahzad [Centre for Solid State Physics, University of the Punjab, Lahore 54560 (Pakistan)

    2013-02-15

    M-type hexaferrites with new substitution of rare-earth element Tb{sup 3+} having nominal composition Ba{sub 0.5}Sr{sub 0.5-x}Tb{sub x}AlFe{sub 11}O{sub 19} (x = 0.0, 0.05, 0.1, 0.15, 0.2, and 0.25) were synthesized by the sol-gel auto-combustion technique. The main aim of study is to investigate the effect of terbium (Tb{sup 3+}) ions substitution at Sr{sup 2+} site on the structural and magnetic properties. The materials were characterized by Differential Scanning Calorimetry, Thermogravimetry, Fourier Transform Infra-Red spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometery analyses. The XRD patterns confirm the formation of M-type hexaferrite phase. The crystallite size was found to be in the range of 17-45 nm which is good enough to obtain the suitable signal-to-noise ratio in the high density recording media. The magnetic properties such as saturation magnetization (M{sub s}), retentivity (M{sub r}), squareness ratio (M{sub r}/M{sub s}) and coercivity (H{sub c}) were calculated from the MH-loops. The saturation magnetization (M{sub s}) and retentivity (M{sub r}) decreased from 48.9-26.9 and 36.8-18.1 emu/g, respectively which may be due to spin canting and hence reduction in the super-exchange interactions. The enhancement of coercivity (H{sub c}) from 1825 to 4440 G may be due to higher magnetocrystalline anisotropy, which is due to the Fe{sup 2+} ions located on a 2a site. The magnetic properties such as retentivity (M{sub r}) and coercivity (H{sub c}) make the synthesized materials useful for high density recording media and permanent magnets.

  12. PLANT SPACING AND WEED MANAGEMENT TECHNIQUES INFLUENCE WEED COMPETITIVENESS OF DRUM SEEDED RICE (Oryza sativa L.

    Directory of Open Access Journals (Sweden)

    B N Sandeep Nayak

    2014-11-01

    Full Text Available Direct wet seeded-rice sown through drum seeder, a potential wise rice production system in the present-day scenario, is subject to severe weed infestation and, therefore, development of a sustainable weed management strategy is crucial for its wide spread adoption. The present study was conducted in kharif 2012 at department of agronomy division with NLR-33358 (SOMASILA using six planting densities under five weed management conditions. The plant spacing tried were: 20cm x 7cm, 20 cm x 10.5 cm, 20 cm x 14 cm, 20 cm x 17.5 cm and 20 cm x 24.5cm and 20 cm x15cm. with a plant density of 71, 47, 35, 28, 20 and 33 hills m-2, respectively and five weed management practices viz., weedy check (W1, hand weeding at 20 and 40 DAS (W2, cono weeding at 20 and 40 with modified cono weeder (W3, pre-emergence application of anilofos @ 0.375 kg a.i ha-1 followed by post-emergence application of 2, 4 D sodium salt @ 1.0 kg a.i ha-1 20-25 DAS (W4, pre-emergence application of pendimethalin @1.0 kg a.i ha-1 followed by post-emergence application of bispyribac sodium @ 20 g a.i ha-1 30 DAS ( W5. . The experiment was laid out in strip- plot design with three replications assigning weed management techniques in vertical factor and plant spacing in horizontal factor. Direct wet seeded rice field was infested with 12 and 22 weed species, kharif -2012 season having Echinochloa colona, Leptochloa chinensis, Digitaria aescendens, Cyperus iriaand Eleusine indicaas the predominant weeds. Rice spacing exerted significant influence on both weed pressure and yield performance of crop. With the increase in plant spacing weed dry matter decreased but rice yield increased. In this season, among different plant densities, the highest density of 71 hills m-2(D1 resulted in minimum weed density, weed drymatter, and more number of tillers m-2 and maximum drymatter production at all stages of plant growth. closest spacing resulted in maximum weed suppression, but among various rice

  13. Results of a nuclear power plant application of A New Technique for Human Error Analysis (ATHEANA)

    Energy Technology Data Exchange (ETDEWEB)

    Whitehead, D.W.; Forester, J.A. [Sandia National Labs., Albuquerque, NM (United States); Bley, D.C. [Buttonwood Consulting, Inc. (United States)] [and others

    1998-03-01

    A new method to analyze human errors has been demonstrated at a pressurized water reactor (PWR) nuclear power plant. This was the first application of the new method referred to as A Technique for Human Error Analysis (ATHEANA). The main goals of the demonstration were to test the ATHEANA process as described in the frame-of-reference manual and the implementation guideline, test a training package developed for the method, test the hypothesis that plant operators and trainers have significant insight into the error-forcing-contexts (EFCs) that can make unsafe actions (UAs) more likely, and to identify ways to improve the method and its documentation. A set of criteria to evaluate the success of the ATHEANA method as used in the demonstration was identified. A human reliability analysis (HRA) team was formed that consisted of an expert in probabilistic risk assessment (PRA) with some background in HRA (not ATHEANA) and four personnel from the nuclear power plant. Personnel from the plant included two individuals from their PRA staff and two individuals from their training staff. Both individuals from training are currently licensed operators and one of them was a senior reactor operator on shift until a few months before the demonstration. The demonstration was conducted over a 5-month period and was observed by members of the Nuclear Regulatory Commission`s ATHEANA development team, who also served as consultants to the HRA team when necessary. Example results of the demonstration to date, including identified human failure events (HFEs), UAs, and EFCs are discussed. Also addressed is how simulator exercises are used in the ATHEANA demonstration project.

  14. A Confocal Technique Applicable to Studies of Cellular pH-related Signaling in Plants

    Institute of Scientific and Technical Information of China (English)

    Bing-Bing Li; Zhi-Hui Gao; Xiao-Yan Zhou; Hui-Bo Ren; Min Xie; Yi-Juan Fan; Jian-Fang Hu; Wen-Suo Jia

    2008-01-01

    pH may act as a crucial signal In both animal and plant cells. It Is very difficult to monitor pH signals and this has largely hindered progress in the investigation of pH signaling, particularly systematic pH signaling. Here, we report the development of a confocal technique to monitor leaf apoplastic pH in intact plants, which Is particularly suitable for the studies on root to shoot signaling. A variety of different pH indicators and plant species were tested. It was found that different pH indicators, for example, 2',7'-Bis-(2-carboxyethyl)-5-(and-6)-carboxyfluoresce (BCECF), SNARF-4F 5-(and-6). carboxylic acid (SNARF) and DM-NERF (NERF), were of different properties, and to successfully monitor pH at a sub-cellular level, the comparability between the pH indicator and plant species must be involved according to their suitable pH range and loading characteristics. The loading characteristics of different pH indicators differ with different plant species, cell types and their developing stages. No matter what methods were adopted, BCECF and SNARF could not be loaded specifically in the leaf apoplast in sunflower, tomato, and Comelina communis L. In contrast, regardless of the methods adopted, NERF could be loaded efficiently and specifically in the leaf apoplast in C. communis, but not in other plants. In Co comrnunis, the determination coefficient for In vitro and in situ calibration of NERF was very high, which was respectively 0.9951 and 0.991 6, and therefore, the adoption of NERF together with C. communis could construct an ideal experimental system that Is suitable for the investigation of pH systematic signaling. Ratio image analysis demonstrated that the leaf apoplastic pH was about 5.5 in non-stressed conditions, and water deficit could trigger an increase in pH by about half a pH unit, which is the first evidence to directly indicate that pH Is able to act as a systematic signal under water deficit conditions.

  15. Oxy-fuel combustion of solid fuels

    DEFF Research Database (Denmark)

    Toftegaard, Maja Bøg; Brix, Jacob; Jensen, Peter Arendt

    2010-01-01

    Oxy-fuel combustion is suggested as one of the possible, promising technologies for capturing CO2 from power plants. The concept of oxy-fuel combustion is removal of nitrogen from the oxidizer to carry out the combustion process in oxygen and, in most concepts, recycled flue gas to lower the flame...... temperature. The flue gas produced thus consists primarily of carbon dioxide and water. Much research on the different aspects of an oxy-fuel power plant has been performed during the last decade. Focus has mainly been on retrofits of existing pulverized-coal-fired power plant units. Green-field plants which...... provide additional options for improvement of process economics are however likewise investigated. Of particular interest is the change of the combustion process induced by the exchange of carbon dioxide and water vapor for nitrogen as diluent. This paper reviews the published knowledge on the oxy-fuel...

  16. Development of a fluorescent in situ hybridization (FISH) technique for visualizing CGMMV in plant tissues.

    Science.gov (United States)

    Shargil, D; Zemach, H; Belausov, E; Lachman, O; Kamenetsky, R; Dombrovsky, A

    2015-10-01

    Cucumber green mottle mosaic virus (CGMMV), which belongs to the genus Tobamovirus, is a major pathogen of cucurbit crops grown indoors and in open fields. Currently, immunology (e.g., ELISA) and molecular amplification techniques (e.g., RT-PCR) are employed extensively for virus detection in plant tissues and commercial seed lots diagnostics. In this study, a fluorescent in situ hybridization (FISH) technique, using oligonucleotides whose 5'-terminals were labeled with red cyanine 3 (Cy3) or green fluorescein isothiocyanate (FITC), was developed for the visualization of the pathogen in situ. This simple and reliable method allows detection and localization of CGMMV in the vegetative and reproductive tissues of cucumber and melon. When this technique was applied in male flowers, anther tissues were found to be infected; whereas the pollen grains were found to be virus-free. These results have meaningful epidemiological implications for the management of CGMMV, particularly with regard to virus transfer via seed and the role of insects as CGMMV vectors.

  17. Investigation on trace and major elements in anti-asthmatic medicinal plants by PIXE and PIGE techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bhanisana Devi, R.K., E-mail: bhanisanark@gmail.com [Department of Physics, Manipur University, Canchipur 795003 (India); Nandakumar Sarma, H. [Department of Physics, Manipur University, Canchipur 795003 (India); Kumar, Sanjiv [National Centre for Compositional Characterization of Materials (NCCCM), Hyderabad 500062 (India)

    2015-01-15

    Five widely used anti-asthmatic medicinal plants of north-eastern region of India have been investigated by using Proton Induced X-ray Emission (PIXE) and Proton Induced Gamma ray Emission (PIGE) techniques. The elements namely K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se and Br were detected with different concentrations (in ppm level) by PIXE technique whereas light elements namely F, Na, Mg, Al, P and Cl by PIGE technique in the studied plants. No toxic heavy metals such as Hg, Pb, Cd were detected. Analysis was performed on thick targets (pellets) prepared using the powders of specimens through a series of processing steps. Thick targets of plant based Certified Reference Materials (CRMs) were served as standardization of PIXE and PIGE set up. The trace elements present in the studied plants have been correlated with their medicinal properties.

  18. Investigation on trace and major elements in anti-asthmatic medicinal plants by PIXE and PIGE techniques

    Science.gov (United States)

    Bhanisana Devi, R. K.; Nandakumar Sarma, H.; Kumar, Sanjiv

    2015-01-01

    Five widely used anti-asthmatic medicinal plants of north-eastern region of India have been investigated by using Proton Induced X-ray Emission (PIXE) and Proton Induced Gamma ray Emission (PIGE) techniques. The elements namely K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se and Br were detected with different concentrations (in ppm level) by PIXE technique whereas light elements namely F, Na, Mg, Al, P and Cl by PIGE technique in the studied plants. No toxic heavy metals such as Hg, Pb, Cd were detected. Analysis was performed on thick targets (pellets) prepared using the powders of specimens through a series of processing steps. Thick targets of plant based Certified Reference Materials (CRMs) were served as standardization of PIXE and PIGE set up. The trace elements present in the studied plants have been correlated with their medicinal properties.

  19. Investigations into the Impact of the Equivalence Ratio on Turbulent Premixed Combustion Using Particle Image Velocimetry and Large Eddy Simulation Techniques: “V” and “M” Flame Configurations in a Swirl Combustor

    KAUST Repository

    Kewlani, Gaurav

    2016-03-24

    Turbulent premixed combustion is studied using experiments and numerical simulations in an acoustically uncoupled cylindrical sudden-expansion swirl combustor, and the impact of the equivalence ratio on the flame–flow characteristics is analyzed. In order to numerically capture the inherent unsteadiness exhibited in the flow, the large eddy simulation (LES) technique based on the artificial flame thickening combustion model is employed. The experimental data are obtained using particle image velocimetry. It is observed that changes in heat loading, in the presence of wall confinement, significantly influence the flow field in the wake region, the stabilization location of the flame, and the flame intensity. Specifically, increasing the equivalence ratio drastically reduces the average inner recirculation zone size and causes transition of the flame macrostructure from the “V” configuration to the “M” configuration. In other words, while the flame stabilizes along the inner shear layer for the V flame, a persistent diffuse reaction zone is also manifested along the outer shear layer for the M flame. The average chemiluminescence intensity increases in the case of the M flame macrostructure, while the axial span of the reaction zone within the combustion chamber decreases. The predictions of the numerical approach resemble the experimental observations, suggesting that the LES framework can be an effective tool for examining the effect of heat loading on flame–flow interactions and the mechanism of transition of the flame macrostructure with a corresponding change in the equivalence ratio.

  20. Evaluation of specimen preparation techniques for micro-PIXE localisation of elements in hyperaccumulating plants

    Energy Technology Data Exchange (ETDEWEB)

    Kachenko, Anthony G. [Faculty of Agriculture, Food and Natural Resources, University of Sydney, New South Wales 2006 (Australia)], E-mail: a.kachenko@usyd.edu.au; Siegele, Rainer; Bhatia, Naveen P. [Institute for Environmental Research, Australian Nuclear Science and Technology Organization, Lucas Heights, New South Wales 2234 (Australia); Singh, Balwant [Faculty of Agriculture, Food and Natural Resources, University of Sydney, New South Wales 2006 (Australia); Ionescu, Mihail [Institute for Environmental Research, Australian Nuclear Science and Technology Organization, Lucas Heights, New South Wales 2234 (Australia)

    2008-04-15

    Hybanthus floribundus subsp. floribundus, a rare Australian Ni-hyperaccumulating shrub and Pityrogramma calomelanos var. austroamericana, an Australian naturalized As-hyperaccumulating fern are promising species for use in phytoremediation of contaminated sites. Micro-proton-induced X-ray emission ({mu}-PIXE) spectroscopy was used to map the elemental distribution of the accumulated metal(loid)s, Ca and K in leaf or pinnule tissues of the two plant species. Samples were prepared by two contrasting specimen preparation techniques: freeze-substitution in tetrahydrofuran (THF) and freeze-drying. The specimens were analysed to compare the suitability of each technique in preserving (i) the spatial elemental distribution and (ii) the tissue structure of the specimens. Further, the {mu}-PIXE results were compared with concentration of elements in the bulk tissue obtained by ICP-AES analysis. In H. floribundus subsp. floribundus, {mu}-PIXE analysis revealed Ni, Ca and K concentrations in freeze-dried leaf tissues were at par with bulk tissue concentrations. Elemental distribution maps illustrated that Ni was preferentially localised in the adaxial epidermal tissues (1% DW) and least concentration was found in spongy mesophyll tissues (0.53% DW). Conversely, elemental distribution maps of THF freeze-substituted tissues indicated significantly lower Ni, Ca and K concentrations than freeze-dried specimens and bulk tissue concentrations. Moreover, Ni concentrations were uniform across the whole specimen and no localisation was observed. In P. calomelanos var. austroamericana freeze-dried pinnule tissues, {mu}-PIXE revealed statistically similar As, Ca and K concentrations as compared to bulk tissue concentrations. Elemental distribution maps showed that As localisation was relatively uniform across the whole specimen. Once again, THF freeze-substituted tissues revealed a significant loss of As compared to freeze-dried specimens and the concentrations obtained by bulk tissue

  1. Evaluation of specimen preparation techniques for micro-PIXE localisation of elements in hyperaccumulating plants

    Science.gov (United States)

    Kachenko, Anthony G.; Siegele, Rainer; Bhatia, Naveen P.; Singh, Balwant; Ionescu, Mihail

    2008-04-01

    Hybanthus floribundus subsp. floribundus, a rare Australian Ni-hyperaccumulating shrub and Pityrogramma calomelanos var. austroamericana, an Australian naturalized As-hyperaccumulating fern are promising species for use in phytoremediation of contaminated sites. Micro-proton-induced X-ray emission (μ-PIXE) spectroscopy was used to map the elemental distribution of the accumulated metal(loid)s, Ca and K in leaf or pinnule tissues of the two plant species. Samples were prepared by two contrasting specimen preparation techniques: freeze-substitution in tetrahydrofuran (THF) and freeze-drying. The specimens were analysed to compare the suitability of each technique in preserving (i) the spatial elemental distribution and (ii) the tissue structure of the specimens. Further, the μ-PIXE results were compared with concentration of elements in the bulk tissue obtained by ICP-AES analysis. In H. floribundus subsp. floribundus, μ-PIXE analysis revealed Ni, Ca and K concentrations in freeze-dried leaf tissues were at par with bulk tissue concentrations. Elemental distribution maps illustrated that Ni was preferentially localised in the adaxial epidermal tissues (1% DW) and least concentration was found in spongy mesophyll tissues (0.53% DW). Conversely, elemental distribution maps of THF freeze-substituted tissues indicated significantly lower Ni, Ca and K concentrations than freeze-dried specimens and bulk tissue concentrations. Moreover, Ni concentrations were uniform across the whole specimen and no localisation was observed. In P. calomelanos var. austroamericana freeze-dried pinnule tissues, μ-PIXE revealed statistically similar As, Ca and K concentrations as compared to bulk tissue concentrations. Elemental distribution maps showed that As localisation was relatively uniform across the whole specimen. Once again, THF freeze-substituted tissues revealed a significant loss of As compared to freeze-dried specimens and the concentrations obtained by bulk tissue analysis

  2. Microbial assessment of an upward and downward dehiding technique in a commercial beef processing plant.

    Science.gov (United States)

    Kennedy, Thomas G; Giotis, Efstathios S; McKevitt, Aideen I

    2014-08-01

    Preventing microbial contamination during dehiding is challenging, and skinning methods are of critical importance for the hygienic status of beef carcasses. Two skinning methods are usually employed: upward hide pulling (UHP) and downward hide pulling (DHP). This study has compared the microbiological contamination of carcasses using both systems in a beef processing plant in the process of changing its dehiding method from UHP to DHP. 100 cm(2) areas from eight carcass sites (ham, chuck, rump, bung, flank, brisket, shin and neck) were sampled on 36 skinned carcasses dehided by each technique. Total viable counts (TVCs) and Enterobacteriaceae counts for each site were determined. No significant differences were observed in total (pooled-samples) carcass contamination regardless of the method used. However, significant differences (pHACCP pre-requisite programmes, and are not necessarily associated with the skinning method per se.

  3. A potential dating technique using 228Th/228Ra ratio for tracing the chronosequence of elemental concentrations in plants.

    Science.gov (United States)

    Chao, J H; Niu, H; Chiu, C Y; Lin, C

    2007-06-01

    We propose a radiometric method based on measurement of the radioactivity of the naturally occurring radionuclides (228)Ra and 228)Th and the derived (228)Th/(228)Ra ratios in plant samples to estimate plant age and the corresponding nutritional conditions in a field-growing fern, Dicranopteris linearis. Plant age (tissue age) was associated with the (228)Th/(228)Ra ratio in fronds, which implies the accumulation time of immobile elements in the plant tissue or the life span of the fronds. Results indicated that the accumulation of alkaline earth elements in D. linearis is relatively constant with increased age, while the K concentration is reversed with age because of translocation among plant tissues. Estimation of dating uncertainty based on measurement conditions revealed that the radiometric technique can be applied to trace chronosequential changes of elemental concentrations and environmental pollutants in plants with ages of less than 10-15 years.

  4. Response Time Evaluation for the Plant Protection System Using a Combined Technique of Analysis and Test

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Jae; Han, Seung; Yun, Jae Hee; Baek, Seung Min [KECO EnC, Inc., Daejeon (Korea, Republic of)

    2015-10-15

    This paper proposes the response time evaluation methodology for the plant protection system (PPS) trip channel for the advance power reactor 1400 (APR1400) nuclear power plant. To demonstrate that the PPS tip channel is functioning within its allowable response time limit, the proposed methodology uses the combined technique of both the response time analysis and test. The main purpose of determining the trip setpoint for safety systems is to meet the requirement of an analytical limit assumed in performing safety analyses. In addition, the response time assumed during safety analyses shall also be satisfied by the safety-related instrumentation. The response time is another critical factor required to ensure that the safety-related instrumentation channels accept the crucial assumptions of safety analyses. The response time evaluation methodology proposed herein is applied to the low steam generator level (LSGL) reactor trip parameter for the APR1400. The response time analysis for the LSGL trip parameter demonstrated that the analyzed response time would not exceed the allocated response time. The results of the response time also showed that all of the measured response times would be less than the analyzed response time.

  5. Fungal disease detection in plants: Traditional assays, novel diagnostic techniques and biosensors.

    Science.gov (United States)

    Ray, Monalisa; Ray, Asit; Dash, Swagatika; Mishra, Abtar; Achary, K Gopinath; Nayak, Sanghamitra; Singh, Shikha

    2017-01-15

    Fungal diseases in commercially important plants results in a significant reduction in both quality and yield, often leading to the loss of an entire plant. In order to minimize the losses, it is essential to detect and identify the pathogens at an early stage. Early detection and accurate identification of pathogens can control the spread of infection. The present article provides a comprehensive overview of conventional methods, current trends and advances in fungal pathogen detection with an emphasis on biosensors. Traditional techniques are the "gold standard" in fungal detection which relies on symptoms, culture-based, morphological observation and biochemical identifications. In recent times, with the advancement of biotechnology, molecular and immunological approaches have revolutionized fungal disease detection. But the drawback lies in the fact that these methods require specific and expensive equipments. Thus, there is an urgent need for rapid, reliable, sensitive, cost effective and easy to use diagnostic methods for fungal pathogen detection. Biosensors would become a promising and attractive alternative, but they still have to be subjected to some modifications, improvements and proper validation for on-field use. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. A new sand pouch-plant infection technique for enumeration of rhizobia in soil

    Directory of Open Access Journals (Sweden)

    Stefan Martyniuk

    2014-01-01

    Full Text Available A sand pouch-plant infection technique for counting most probable numbers of rhizobia in soil is described. Populations of Rhizobium leguminosarum bv. trifoli detected by the plant infection method performed in enclosed glass tubes or in sand pouches did not differ significantly. The described method was used to assess numbers of R. leguminosarum bv. trifoli (R.l.t. and bv. viciae (R.l.v. in 20 soils of Poland. Logarithms of the populations of R.l.t. in the tested soils ranged from not detectable level to 4.76 and those of R.l.v. from 2.23 to 5.84 in g1 of soil dry mass. Numbers of R.l.t. were significantly correlated with soil clay, C org, and total N contents but not with the soil pH (in KCI, while numbers of R.l.v. showed significant correlation only with the soil pH.

  7. Remove of lead from the polluted water by phytoremediation technique (Eclipta Alba plant

    Directory of Open Access Journals (Sweden)

    Mohamad J. Noufal, Zena A. Maalla, Dareen J. Noufal, Ali A. Hossean

    2017-01-01

    Full Text Available One of the major environmental problems is the pollution of water and soils by toxic heavy metals. The aim of current study was estimation the ability of Eclipta alba plant for the removal of (Pb from the polluted water by phytoremediation technique and study the effect of a number of parameters(Pb concentration, contact time and pH values. The plant showed higher removal efficiency (99.2% after 7 days of treatment at 50 ppm. The best removal efficiency of Pb 98.95% at 100 ppm was occurred at pH7. The root ability to accumulate Pb was more than the shoot ability, after 7 days treatment of water and pH=7, they were 2852.5 mg/kg, 2497.5 mg/kg and 502.5 mg/kg in roots, stems and leaves respectively. These results showed that Eclipta Alba can be used in biological treatment of polluted water.

  8. Combustion Research Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Combustion Research Laboratory facilitates the development of new combustion systems or improves the operation of existing systems to meet the Army's mission for...

  9. High Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — At NETL's High-Pressure Combustion Research Facility in Morgantown, WV, researchers can investigate new high-pressure, high-temperature hydrogen turbine combustion...

  10. Determining Heats of Combustion of Gaseous Hydrocarbons

    Science.gov (United States)

    Singh, Jag J.; Sprinkle, Danny R.; Puster, Richard L.

    1987-01-01

    Enrichment-oxygen flow rate-ratio related to heat of combustion. Technique developed for determining heats of combustion of natural-gas samples. Based on measuring ratio m/n, where m is (volmetric) flow rate of oxygen required to enrich carrier air in which test gas flowing at rate n is burned, such that mole fraction of oxygen in combustion-product gases equals that in carrier air. The m/n ratio directly related to heats of combustion of saturated hydrocarbons present in natural gas.

  11. Energetic retrofitting of industrial heat supply systems. Possibilities of enhancing the efficiency and energy conservation at large combustion engineering plants; Energetische Modernisierung industrieller Waermeversorgungssysteme. Moeglichkeiten der Effizienzsteigerung und der Energieeinsparung an grossen feuerungstechnischen Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-12-15

    In the contribution under consideration, the Deutsche Energie-Agentur GmbH (Berlin, Federal Republic of Germany) reports on an energetic modernization of industrial heat supply systems. Possibilities of an enhancement of the energetic efficiency and energy conservation at large combustion engineering plants are described. After an introduction to this theme, the author of this contribution provides an overview of the optimization of heat supply systems, and reports on the following aspects: Optimisation of the heat demand; energy efficient heat generation; heat recovery; energy efficient conversion technology and generation technology; associate partners for more energy efficiency in industry and commerce; best practice examples.

  12. Analytical techniques for determination and control of silica content in the water in thermal power plants

    Directory of Open Access Journals (Sweden)

    Ignjatović Nataša R.

    2015-01-01

    Full Text Available Ultrapure water with minimum contents of impurities is used for the preparation of steam in thermal power plants. More recently it has been found that the corrosion process is also influenced by sodium ions, chloride ions, and all forms of silicon in water. At higher temperatures and under high pressure the less soluble compounds of silicon are extracted, which form deposits on the walls of the boiler, the piping system and the turbine blades. Silicon is found in water in the form of different types (species which are characterized by specific physical and chemical properties. Distinctions can be made between highly reactive species of ionic (silicate anions and molecular forms (silicic acid and relatively inert types (suspended, colloidal, and polymerized silicon. The determination of various forms of silicon in water is a complex analytical task. This paper covers relevant research in the field of silicon specification analysis. Maintaining the unchanged, original composition of silicon species during various stages of analysis (sample collection, storage, and conservation has been given special attention. A large number of methods and procedures have been developed for the analysis of species of silicon, including chromatographic, spectroscopic and electrochemical techniques and combinations thereof. The techniques used for determining both the total amount and individual forms of silicon have been singled out. There is also an overview of the coupled techniques used most frequently in practice by using the methodology which involves preliminary separation of species and then individual specification. The paper offers an overview of analytical properties, advantages and disadvantages of the most representative analytical methods developed specifically for the analysis of silicon species in ultrapure water. The most important studies focusing on the silicon species in water have been highlighted and presented in detail. The determination of

  13. A Translator Verification Technique for FPGA Software Development in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Yeob; Kim, Eui Sub; Yoo, Jun Beom [Konkuk University, Seoul (Korea, Republic of)

    2014-10-15

    Although the FPGAs give a high performance than PLC (Programmable Logic Controller), the platform change from PLC to FPGA impose all PLC software engineers give up their experience, knowledge and practices accumulated over decades, and start a new FPGA-based hardware development from scratch. We have researched to fine the solution to this problem reducing the risk and preserving the experience and knowledge. One solution is to use the FBDtoVerilog translator, which translates the FBD programs into behavior-preserving Verilog programs. In general, the PLCs are usually designed with an FBD, while the FPGAs are described with a HDL (Hardware Description Language) such as Verilog or VHDL. Once PLC designer designed the FBD programs, the FBDtoVerilog translates the FBD into Verilog, mechanically. The designers, therefore, need not consider the rest of FPGA development process (e.g., Synthesis and Place and Routing) and can preserve the accumulated experience and knowledge. Even if we assure that the translation from FBD to Verilog is correct, it must be verified rigorously and thoroughly since it is used in nuclear power plants, which is one of the most safety critical systems. While the designer develops the FPGA software with the FBD program translated by the translator, there are other translation tools such as synthesis tool and place and routing tool. This paper also focuses to verify them rigorously and thoroughly. There are several verification techniques for correctness of translator, but they are hard to apply because of the outrageous cost and performance time. Instead, this paper tries to use an indirect verification technique for demonstrating the correctness of translator using the co-simulation technique. We intend to prove only against specific inputs which are under development for a target I and C system, not against all possible input cases.

  14. Fundamental combustion and diagnostics research at Sandia. Progress report, April-June 1980

    Energy Technology Data Exchange (ETDEWEB)

    Gusinow, M.A. (ed.)

    1980-09-01

    The combustion research emphasizes basic research into fundamental problems associated with combustion. The overall program addresses detailed chemistry of combustion, fundamental processes associated with laminar and turbulent flames, development of research techniques specifically applicable to combustion environments, and operation of the user-oriented Combustion Research Facility. The first section of this report contains activities in Combustion Research, the second section contains activities in Molecular Physics and Spectroscopy, and the third section contains activities in Diagnostics Research.

  15. Combustion chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Brown, N.J. [Lawrence Berkeley Laboratory, CA (United States)

    1993-12-01

    This research is concerned with the development and use of sensitivity analysis tools to probe the response of dependent variables to model input variables. Sensitivity analysis is important at all levels of combustion modeling. This group`s research continues to be focused on elucidating the interrelationship between features in the underlying potential energy surface (obtained from ab initio quantum chemistry calculations) and their responses in the quantum dynamics, e.g., reactive transition probabilities, cross sections, and thermal rate coefficients. The goals of this research are: (i) to provide feedback information to quantum chemists in their potential surface refinement efforts, and (ii) to gain a better understanding of how various regions in the potential influence the dynamics. These investigations are carried out with the methodology of quantum functional sensitivity analysis (QFSA).

  16. Rhizofiltration of lead using an aromatic medicinal plant Plectranthus amboinicus cultured in a hydroponic nutrient film technique (NFT) system.

    Science.gov (United States)

    Ignatius, A; Arunbabu, V; Neethu, J; Ramasamy, E V

    2014-11-01

    Heavy metal contamination of water bodies and groundwater is a major concern of the modern world. Rhizofiltration--the use of plant root system to remove/extract pollutants from wastewater--has proven advantages over conventional methods of treatment. However, commercialization of this in situ remediation technology requires a better understanding of plant-metal interactions especially on the ability of different plant species to accumulate metals at different parts of the plant system which is critical for the successful remediation of contaminated medium. Many aquatic and terrestrial plants have been reported to accumulate heavy metals when grown hydroponically. Therefore, a batch experiment with different concentrations of lead and a nutrient film technique (NFT) experiment with recycling of wastewater were employed in this study in order to investigate the rhizofiltration of lead-containing wastewater using Plectranthus amboinicus, an aromatic medicinal plant. Results show that P. amboinicus is tolerant to a wide range of lead concentrations and nutrient deficiency. The plant accumulates considerable amount of lead, particularly in the roots, and translocation to the stem and leaf was limited, indicating that the use of leaves/above-ground parts of the plant for medicinal purposes is not hindered by its ability to remove lead from the soil or water. The study also suggests that the plant can be considered for the clean-up of lead-contaminated wastewater in combination with safe biomass disposal alternatives.

  17. Hollow fiber membrane contactors for post-combustion CO2 capture: a scale-up study from laboratory to pilot plant

    NARCIS (Netherlands)

    Chabanon, E.; Kimball, E.; Favre, E.; Lorain, O.; Goetheer, E.L.V.; Ferre, D.; Gomez, A.; Broutin, P.

    2013-01-01

    Membrane contactors have been proposed for decades as a way to achieve intensified mass transfer processes. Post-combustion CO2 capture by absorption into a chemical solvent is one of the currently most intensively investigated topics in this area. Numerous studies have already been reported,

  18. Hollow fiber membrane contactors for post-combustion CO2 capture: a scale-up study from laboratory to pilot plant

    NARCIS (Netherlands)

    Chabanon, E.; Kimball, E.; Favre, E.; Lorain, O.; Goetheer, E.L.V.; Ferre, D.; Gomez, A.; Broutin, P.

    2013-01-01

    Membrane contactors have been proposed for decades as a way to achieve intensified mass transfer processes. Post-combustion CO2 capture by absorption into a chemical solvent is one of the currently most intensively investigated topics in this area. Numerous studies have already been reported, unfort

  19. Planting technique of Camellia oleifera%油茶丰产栽培技术

    Institute of Scientific and Technical Information of China (English)

    何慎; 李恂; 何赞波; 周修权

    2014-01-01

    在传统栽培方法的基础上,通过对北湖区碧香源油茶基地油茶新造林丰产栽培技术7年的深入研究,总结出新的栽培方法:油茶苗根部保湿栽培法;油茶高位定干自然整枝法;油茶多品种混栽法;油茶保花促果增产法等。以上方法可使油茶新造林苗木保存率95%以上;7年生(2007年种)油茶新造林产茶果654 kg/667 m2,实际产油32.44 kg/667 m2,在油茶盛产期到来前,茶果产量每年成倍增加,同时有效克服了油茶大小年的差异,应用效果显著。%Based on the traditional cultivation methods in Beihu District Bixiang source Oil-tea camellia base,through in-depth research on Oil-tea camellia plantation yield new cultivation techniques for seven years,summed up the new culti-vation method:Oil-tea camellia root retains water cultivation method;high stem natural pruning method;mixed planting varieties method;promote Oil-tea camellia fruit yield method etc. By the above method over the base of the application, the new Oil-tea camellia planting seedlings preservation rate of 95%;7-year-old (2007 planting)Oil-tea camellia planta-tion production of new 654 kg of Camellia fruit per acre,the actual production of 32.44 kg of camellia-oil per acre,Be-fore the advent of Oil-tea camellia season,Camellia-oil and fruit yield increased exponentially every year,while at the same time,effectively overcomes the differences of annual output size of Camellia oleifera,the practical application effect is very notable.

  20. Combustion of Lausitz brown coal under oxyfuel. Process conditions in a 0,5 MW{sub th} combustion plant; Verbrennung von Lausitzer Braunkohle unter Oxyfuel. Prozessbedingungen in einer 0,5 MW{sub th}-Feuerungsanlage

    Energy Technology Data Exchange (ETDEWEB)

    Kass, Helge; Jentsch, Norbert; Burboeck, Martin; Panzenboeck, Helmut; Krautz, Hans Joachim

    2008-07-01

    For climate policy reasons, future coal-fired power stations are to be built on the basis of the CCS technology (CCS = Carbon Capture and Storage). Thereby, the oxyfuel process combines the advantages of a simple process design at the combustion with the highest separation potential of carbon dioxide. In order to test the oxyfuel process, in the year 2005 an existing 0.5 MW{sub th} test facility of the Centre for Power Technology (Cottbus, Federal Republic of Germany) was selected and extended by substantial components of the oxyfuel process such as for example oxygen supply, flue gas condenser. Subsequently, the oxyfuel process was examined within a test period of two years. The most important cognitions of this test period are presented in the contribution under consideration.

  1. Application of catalytic combustion technology in the treatment of foul gas from refinery waste water treatment plant%催化燃烧技术在炼油污水处理场恶臭治理中的应用

    Institute of Scientific and Technical Information of China (English)

    刘永斌; 程俊梅; 程彬彬

    2011-01-01

    介绍了催化燃烧技术在炼油污水处理场恶臭治理中的应用情况.工业应用表明,催化燃烧技术适用于处理石化炼油污水场总进水口、隔油池、浮选池等散发的恶臭气体,废气处理效果良好.恶臭治理设施运行后,对硫化物的去除率达95%以上,对硫化氢的去除率接近100%,对总烃的去除率达到85%以上,净化后的气体能够满足国家排放标准的要求.催化燃烧技术治理恶臭污染项目的实施,对同类型炼化装置将起到借鉴作用.%The application of catalytic combustion technology in the treatment of foul gas from refinery waste water treatment plant was introduced. The catalytic combustion technology was applicable for the treatment of foul gases from water inlet of refinery waste water treatment plant, API separator, flotation pit, etc with good results. After operation of foul gas treatment facilities, the sulfide removal rate is over 95% , the H2S removal rate is close to 100% and total hydrocarbons removal rate is more than 85%. The purified gas meets China national emission standards. The implementation of foul gas treatment facilities using catalytic combustion technology provides a good reference for the operation of similar refinery process units.

  2. Analysis of {sup 14}CO{sub 2} trapped {sup 14}C Sorbent, and {sup 14}C and {sup 3}H Radioactivity Determination in Resins and Oils from Nuclear Power Plants Using a Combustion Method

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Young Gun; Kim, Chang Jong; Choi, Geun Sik; Chung, Kun Ho; Kang, Mun Ja [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    Tritium ({sup 3}H, T) generated in the heavy water and C fourteen ({sup 14}C) originated from the graphite moderator or structural materials of the nuclear power plant can cause acute and/or chronic harmful effects by inhalation and ingestion of these radionuclides owing to their binding affinity toward biomolecules and gas phase. {sup 3}H and {sup 14}C radioactivity in ion exchange resins and oils from nuclear power plants were determined by an oxidation (combustion) method. The 0.1 M HNO{sub 3} solution and the {sup 14}C sorbent trapped the {sub 3}H and {sup 14}C respectively in the gas from the combustion of samples. All samples were burned without ash in the combustion system. The reaction of CO{sub 2} and {sup 14}C sorbent was investigated by FT-IR analysis. The study demonstrated the different reaction mechanism according to the CO{sub 2} concentration. In the FT-IR study, it is clearly confirmed that CO{sub 2} from the burned 1 g of sample can be trapped in the {sup 14}C sorbent completely. During the reaction of CO{sub 2} and {sup 14}C sorbent, the temperature and the viscosity of {sup 14}C sorbent increased due to the decrease of enthalpy change and the bonding between each molecules of the sorbent. We expect that our FT-IR study could motivate the development of {sup 14}C sorbent and confirm the {sup 14}C trapping performance of the {sup 14}C sorbent.

  3. Microstructural changes in NiFe{sub 2}O{sub 4} ceramics prepared with powders derived from different fuels in sol-gel auto-combustion technique

    Energy Technology Data Exchange (ETDEWEB)

    Chauhan, Lalita, E-mail: chauhan.lalita5@gmail.com; Sreenivas, K. [Department of Physics & Astrophysics, University of Delhi, Delhi-110007 (India); Bokolia, Renuka

    2016-05-23

    Structural properties of Nickel ferrite (NiFe{sub 2}O{sub 4}) ceramics prepared from powders derived from sol gel auto-combustion method using different fuels (citric acid, glycine and Dl-alanine) are compared. Changes in the structural properties at different sintering temperatures are investigated. X-ray diffraction (XRD) confirms the formation of single phase material with cubic structure. Ceramics prepared using the different powders obtained from different fuels show that that there are no significant changes in lattice parameters. However increasing sintering temperatures show significant improvement in density and grain size. The DL-alanine fuel is found to be the most effective fuel for producing NIFe{sub 2}O{sub 4} powders by the sol-gel auto combustion method and yields highly crystalline powders in the as-burnt stage itself at a low temperature (80 °C). Subsequent use of the powders in ceramic manufacturing produces dense NiFe{sub 2}O{sub 4} ceramics with a uniform microstructure and a large grain size.

  4. Practical consequences of the Water Framework Directive implementation for combustion plants. New water cleaning technologies and methods for improvement of effluent discharges; Praktiska konsekvenser foer foerbraenningsanlaeggningar vid infoerandet av Vattendirektivet. Nya reningstekniker och foerbaettringsaatgaerder vid utslaepp till vatten

    Energy Technology Data Exchange (ETDEWEB)

    Axby, Fredrik; Hansson, Christina [Carl Bro Energikonsult AB, Malmoe (Sweden)

    2004-11-01

    As a consequence of the growing impact on water resources the Water Framework Directive was legislated in 2000. The directive should ensure that a 'good water status' and entail a coordinated legislation striving for a long-term protection of all water resources. Stakeholders should be able to participate in the preparations of river basin management plans and programs of measures. District based water authorities will administrate the implementation and are mandated to decide upon regional environmental quality standards and promulgate fees for water use and discharges. The Directive contains a list of 33 prioritized substances that should be reduced or phased out. Discharges from combustion plants contain twelve, polyaromatic hydrocarbons (PAH) and heavy metals. PAH and heavy metals impacts growth and vital functions as respiration and photosynthesis of water living organisms and induces cancer in humans. NOEC-values (NO Effect Concentration) state manageable substance concentrations for an organism. Flue gas condensate contains concentrations of some of the substances which impact exceeds the critical state level. Extended sewage treatment could thus be needed. Sludge, wash and soot water contains elevated levels of heavy metals. This water is normally treated by municipal sewage treatment. Further treatment at plant site could be relevant. Presence of PAH and heavy metals in leach water depends on the precipitation. Additional flowing-independent water treatment could be relevant. It is very uncertain how plant owners will be affected. Licenses could be reviewed and standards could be raised for sensitive recipients; new limits for prioritized substances and standards for other types of discharges and water fees could be added. Respites could be given if costs exceed the benefits. Location, ecotoxicological risk assessments and precautionary measures could become more relevant in an EIA. Pricing of water could take place by using a system of emissions

  5. Oxygen-enhanced combustion

    CERN Document Server

    Baukal, Charles E

    2013-01-01

    Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion-new technologies that produce oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include less pollutant emissions as well as increased energy efficiency and productivity. Oxygen-Enhanced Combustion, Second Edition compiles information about using oxygen to enhance industrial heating and melting processes. It integrates fundamental principles, applications, a

  6. Detection of plant leaf diseases using image segmentation and soft computing techniques

    National Research Council Canada - National Science Library

    Singh, Vijai; Misra, A.K

    Agricultural productivity is something on which economy highly depends. This is the one of the reasons that disease detection in plants plays an important role in agriculture field, as having disease in plants are quite natural...

  7. The development of monitoring techniques for thermal stratification in nuclear plant piping

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Cheul Muu; Joo, Young Sang; Yoon, Kwang Sik; Park, Chi Seung; Choi, Ha Lim; Moon, Jae Wha; Bae, Sang Ho

    1996-12-01

    The conventional nondestructive testing has been performed in those area which are susceptible to thermal stress in according to NRC 88-08,11. In addition to that, it is necessary to set up a monitoring system to prevent severe thermal stress to pipes in early stages and to develop the non-intrusive techniques to diagnose the check valve because the thermal stratification has been caused by the malfunction of the check valve in ECCS pipe. Thermal stratification monitoring system has been designed and installed at ECCS line permanently and surge line temporally in YG nuclear power plant. The data is acceptable in according to TASCS guide line. Also, the data originated from ISMS is useful for the arrangement of a special UT program and stress analysis. Applying a togetherness of acoustics and magnetics signal, it is possible to determine the parameters of the function of the check valve internals without disassembling it. This series of tests show that the accelerometers can be use d to measure and to differentiate the three types of impacts; metal to metal impacts mechanical rubs, and worn internal parts. The magnet sensors can be used to detect the opening/closing of stainless check and fluttering of disk. (author). 50 refs., 5 tabs., 28 figs.

  8. Comparison of metaheuristic techniques to determine optimal placement of biomass power plants

    Energy Technology Data Exchange (ETDEWEB)

    Reche-Lopez, P.; Ruiz-Reyes, N.; Garcia Galan, S. [Telecommunication Engineering Department, University of Jaen Polytechnic School, C/ Alfonso X el Sabio 28, 23700 Linares, Jaen (Spain); Jurado, F. [Electrical Engineering Department, University of Jaen Polytechnic School, C/ Alfonso X el Sabio 28, 23700 Linares, Jaen (Spain)

    2009-08-15

    This paper deals with the application and comparison of several metaheuristic techniques to optimize the placement and supply area of biomass-fueled power plants. Both, trajectory and population-based methods are applied for our goal. In particular, two well-known trajectory method, such as Simulated Annealing (SA) and Tabu Search (TS), and two commonly used population-based methods, such as Genetic Algorithms (GA) and Particle Swarm Optimization (PSO) are hereby considered. In addition, a new binary PSO algorithm has been proposed, which incorporates an inertia weight factor, like the classical continuous approach. The fitness function for the metaheuristics is the profitability index, defined as the ratio between the net present value and the initial investment. In this work, forest residues are considered as biomass source, and the problem constraints are: the generation system must be located inside the supply area, and its maximum electric power is 5 MW. The comparative results obtained by all considered metaheuristics are discussed. Random walk has also been assessed for the problem we deal with. (author)

  9. Comparison of various techniques for the extraction and determination of antioxidants in plants.

    Science.gov (United States)

    Bajerová, Petra; Adam, Martin; Bajer, Tomáš; Ventura, Karel

    2014-04-01

    The following extraction techniques have been used for extracting antioxidants (apigenin, coumarin, esculetin, umbelliferone, bergapten, quercetin, rutin, scopoletin and xanthotoxin) from plant material: supercritical fluid extraction, pressurized liquid extraction, extraction by means of Soxhlet apparatus, ultrasonic extraction in ultrasonic bath, and by means of ultrasonic probe. The analytical method based on HPLC-UV detection for the determination of selected antioxidants was developed. For all extracts the antioxidant capacity based on the reduction of free 2,2-diphenyl-1-picrylhydrazyl radical was also determined. Comparing all results the ultrasonic probe method using 0.75 g of sample extracted by 50 mL of acetonitrile in water (30%, v/v) for 25 min at room temperature and with amplitude at 60% (equal to 90 W) without pulsation was evaluated as the best tool. The most significant indicator demonstrating this statement is the antioxidant capacity expressed as gallic acid equivalent where the ultrasonic probe method showed the best results in 10 of 16 samples. Also the operability of ultrasonic probe extraction method compared to other tested methods is more favorable.

  10. Evaluation of soil gas sampling and analysis techniques at a former petrochemical plant site.

    Science.gov (United States)

    Hers, I; Li, L; Hannam, S

    2004-07-01

    Methods for soil gas sampling and analysis are evaluated as part of a research study on soil vapour intrusion into buildings, conducted at a former petro-chemical plant site ("Chatterton site"). The evaluation process was designed to provide information on reliability and selection of appropriate methods for soil gas sampling and analysis, and was based on a literature review of data and methods, and experiments completed as part of the research study. The broader context of this work is that soil gas characterization is increasingly being used for input into risk assessment of contaminated sites, particularly when evaluating the potential intrusion of soil vapour into buildings. There are only a limited number of research studies and protocols addressing soil gas sampling and analysis. There is significant variability in soil gas probe design and sample collection and analysis methods used by practitioners. The experimental studies conducted to evaluate soil gas methods address the permeation or leakage of gases from Tedlar bags, time-dependent sorption of volatile organic compound (VOC)-vapours onto probe surfaces and sampling devices, and analytical and quality control issues for light gas and VOC analyses. Through this work, common techniques for soil gas collection and analysis are described together with implications for data quality arising from the different methods used. Some of the potential pitfalls that can affect soil gas testing are identified, and recommendations and guidance for improved protocols are provided.

  11. Autodesk Combustion 4 fundamentals courseware

    CERN Document Server

    Autodesk,

    2005-01-01

    Whether this is your first experience with Combustion software or you're upgrading to take advantage of the many new features and tools, this guide will serve as your ultimate resource to this all-in-one professional compositing application. Much more than a point-and-click manual, this guide explains the principles behind the software, serving as an overview of the package and associated techniques. Written by certified Autodesk training specialists for motion graphic designers, animators, and visual effects artists, Combustion 4 Fundamentals Courseware provides expert advice for all skill le

  12. Reducing the impact of a desalination plant using stochastic modeling and optimization techniques

    Science.gov (United States)

    Alcolea, Andres; Renard, Philippe; Mariethoz, Gregoire; Bertone, François

    2009-02-01

    SummaryWater is critical for economic growth in coastal areas. In this context, desalination has become an increasingly important technology over the last five decades. It often has environmental side effects, especially when the input water is pumped directly from the sea via intake pipelines. However, it is generally more efficient and cheaper to desalt brackish groundwater from beach wells rather than desalting seawater. Natural attenuation is also gained and hazards due to anthropogenic pollution of seawater are reduced. In order to minimize allocation and operational costs and impacts on groundwater resources, an optimum pumping network is required. Optimization techniques are often applied to this end. Because of aquifer heterogeneity, designing the optimum pumping network demands reliable characterizations of aquifer parameters. An optimum pumping network in a coastal aquifer in Oman, where a desalination plant currently pumps brackish groundwater at a rate of 1200 m 3/h for a freshwater production of 504 m 3/h (insufficient to satisfy the growing demand in the area) was designed using stochastic inverse modeling together with optimization techniques. The Monte Carlo analysis of 200 simulations of transmissivity and storage coefficient fields conditioned to the response to stresses of tidal fluctuation and three long term pumping tests was performed. These simulations are physically plausible and fit the available data well. Simulated transmissivity fields are used to design the optimum pumping configuration required to increase the current pumping rate to 9000 m 3/h, for a freshwater production of 3346 m 3/h (more than six times larger than the existing one). For this task, new pumping wells need to be sited and their pumping rates defined. These unknowns are determined by a genetic algorithm that minimizes a function accounting for: (1) drilling, operational and maintenance costs, (2) target discharge and minimum drawdown (i.e., minimum aquifer

  13. Measuring Combustion Advance in Solid Propellants

    Science.gov (United States)

    Yang, L. C.

    1986-01-01

    Set of gauges on solid-propellant rocket motor with electrically insulating case measures advance of combustion front and local erosion rates of propellant and insulation. Data furnished by gauges aid in motor design, failure analysis, and performance prediction. Technique useful in determining propellant uniformity and electrical properties of exhaust plum. Gauges used both in flight and on ground. Foilgauge technique also useful in basic research on pulsed plasmas or combustion of solids.

  14. Practical Multi-Disciplinary Analysis Tools for Combustion Devices Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The use of multidisciplinary analysis (MDA) techniques for combustion device environment prediction, including complex fluid mixing phenomena, is now becoming...

  15. Development of a ceramic heat exchanger for a combined cycle plant with pressurized coal dust combustion. Final report; Entwicklung eines keramischen Waermeaustauschers fuer eine Kombianlage mit Kohlenstaubdruckfeuerung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Leithner, R.; Ehlers, C.

    2001-12-01

    State of Research: The Pressurized Pulverized Coal Combustion Combined Cycle (PPCCCC) with a directly fired gas turbine can reach electrical efficiencies beyond 50%. The required gas quality upstream the gas turbine has not been reached yet at temperatures above 1000 C. One approach tested is the precipitation of ash and alkalines at temperatures above the ash melting point. This principle contains problems concerning the remaining content of ash and alkalines in the flue gas and damages to the refractory materials due to corrosion. Goal of the Investigation: An alternative process had to be investigated in which the flue gas is cleaned according to the state of the art, i.e. below the ash fusion temperature. This principle requires cooling down the flue gas and heating it up again after cleaning in a high temperature heat exchanger. Method: A ceramic tube-and-shell heat exchanger in a model scale was designed and was operated at realistic conditions in an atmospheric test plant in connection with a high temperture precipitation. Result: The heat exchanger showed a good performance concerning design and material. The expected temperatures were not reached totally because of untight joints. Clogging occurred in the tube entrances at high temperatures because of sintered ash agglomerates. First tests to clean the entrances during operation showed positive results. The ash precipitation by means of a cyclone and ceramic filter candles was performed without difficulties. Conclusion: Avoiding and improving joints will help to achieve higher temperatures. A process of cleaning the tubes in-line has to be introduced to prevent the clogging effects. If this is successfully done for high temperatures, an attractive principle for a PPCCCC-process is available which reaches the gas purity required. (orig.) [German] Derzeitiger Stand der Forschung: Der Kohlenstaubdruckfeuerungs-Kombiprozess mit direkt befeuerter Gasturbine verspricht elektrische Wirkungsgrade ueber 50%. Die

  16. Materials for High-Temperature Catalytic Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Ersson, Anders

    2003-04-01

    Catalytic combustion is an environmentally friendly technique to combust fuels in e.g. gas turbines. Introducing a catalyst into the combustion chamber of a gas turbine allows combustion outside the normal flammability limits. Hence, the adiabatic flame temperature may be lowered below the threshold temperature for thermal NO{sub X} formation while maintaining a stable combustion. However, several challenges are connected to the application of catalytic combustion in gas turbines. The first part of this thesis reviews the use of catalytic combustion in gas turbines. The influence of the fuel has been studied and compared over different catalyst materials. The material section is divided into two parts. The first concerns bimetallic palladium catalysts. These catalysts showed a more stable activity compared to their pure palladium counterparts for methane combustion. This was verified both by using an annular reactor at ambient pressure and a pilot-scale reactor at elevated pressures and flows closely resembling the ones found in a gas turbine combustor. The second part concerns high-temperature materials, which may be used either as active or washcoat materials. A novel group of materials for catalysis, i.e. garnets, has been synthesised and tested in combustion of methane, a low-heating value gas and diesel fuel. The garnets showed some interesting abilities especially for combustion of low-heating value, LHV, gas. Two other materials were also studied, i.e. spinels and hexa aluminates, both showed very promising thermal stability and the substituted hexa aluminates also showed a good catalytic activity. Finally, deactivation of the catalyst materials was studied. In this part the sulphur poisoning of palladium, platinum and the above-mentioned complex metal oxides has been studied for combustion of a LHV gas. Platinum and surprisingly the garnet were least deactivated. Palladium was severely affected for methane combustion while the other washcoat materials were

  17. Development of innovative techniques and principles that may be used as models to improve plant performance. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hanna, Wayne W.; Burton, Glenn W.

    2000-06-25

    We developed fundamental methods and techniques for transferring germplasm from wild to cultivated species. Germplasm transferred included diverse cytoplasms, new genes for pest resistance, genes controlling dry matter yield and apomixis. Some of the germplasm has been shown to be valuable in plant breeding and has been incorporated into commercial cultivators.

  18. Hyphenated chromatographic techniques for the rapid screening and identification of antioxidants in methanolic extracts of pharmaceutically used plants .

    NARCIS (Netherlands)

    Exarchou, V.; Fiamegos, Y.C.; Beek, van T.A.; Nanos, C.G.; Vervoort, J.J.M.

    2006-01-01

    Phytochemical analysis is an important scientific research area, which normally relies on a number of rather laborious and time-consuming techniques for compound identification. Isolation of the ingredients of plant extracts in adequate quantities for spectral and biological analysis was the basis o

  19. Development of innovative techniques and principles that may be used as models to improve plant performance. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hanna, Wayne W.; Burton, Glenn W.

    2000-06-25

    We developed fundamental methods and techniques for transferring germplasm from wild to cultivated species. Germplasm transferred included diverse cytoplasms, new genes for pest resistance, genes controlling dry matter yield and apomixis. Some of the germplasm has been shown to be valuable in plant breeding and has been incorporated into commercial cultivators.

  20. Application of Condition-Based Monitoring Techniques for Remote Monitoring of a Simulated Gas Centrifuge Enrichment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Hooper, David A [ORNL; Henkel, James J [ORNL; Whitaker, Michael [ORNL

    2012-01-01

    This paper presents research into the adaptation of monitoring techniques from maintainability and reliability (M&R) engineering for remote unattended monitoring of gas centrifuge enrichment plants (GCEPs) for international safeguards. Two categories of techniques are discussed: the sequential probability ratio test (SPRT) for diagnostic monitoring, and sequential Monte Carlo (SMC or, more commonly, particle filtering ) for prognostic monitoring. Development and testing of the application of condition-based monitoring (CBM) techniques was performed on the Oak Ridge Mock Feed and Withdrawal (F&W) facility as a proof of principle. CBM techniques have been extensively developed for M&R assessment of physical processes, such as manufacturing and power plants. These techniques are normally used to locate and diagnose the effects of mechanical degradation of equipment to aid in planning of maintenance and repair cycles. In a safeguards environment, however, the goal is not to identify mechanical deterioration, but to detect and diagnose (and potentially predict) attempts to circumvent normal, declared facility operations, such as through protracted diversion of enriched material. The CBM techniques are first explained from the traditional perspective of maintenance and reliability engineering. The adaptation of CBM techniques to inspector monitoring is then discussed, focusing on the unique challenges of decision-based effects rather than equipment degradation effects. These techniques are then applied to the Oak Ridge Mock F&W facility a water-based physical simulation of a material feed and withdrawal process used at enrichment plants that is used to develop and test online monitoring techniques for fully information-driven safeguards of GCEPs. Advantages and limitations of the CBM approach to online monitoring are discussed, as well as the potential challenges of adapting CBM concepts to safeguards applications.

  1. Annual Report: Advanced Combustion (30 September 2012)

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey [NETL; Richards, George

    2012-09-30

    The Advanced Combustion Project addresses fundamental issues of fire-side and steam-side corrosion and materials performance in oxy-fuel combustion environments and provides an integrated approach into understanding the environmental and mechanical behavior such that environmental degradation can be ameliorated and long-term microstructural stability, and thus, mechanical performance can lead to longer lasting components and extended power plant life. The technical tasks of this effort are Oxy-combustion Environment Characterization, Alloy Modeling and Life Prediction, and Alloy Manufacturing and Process Development.

  2. Relationship Between Coal Powder and Its Combustibility

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Coal's volatile component,ash and fixed carbon content have different functions in different stages of a combustion process, but the traditional coal classification can precisely show its combustion property.In this experiment coal's evaluation indexes (ignition index Di),(burn off index Df) were used to qualitatively show the ignition property and combustion ending property of coal samples.Meanwhile,considering actual heating circumstances in calciner (in cement plants),this thesis established the relationship among the ignition index,burn off index and coal's industrial analysis value, which makes it possible for the user to predict the quality of coal before using it and is very valuable in practice.

  3. Links between Plant and Rhizoplane Bacterial Communities in Grassland Soils, Characterized Using Molecular Techniques

    Science.gov (United States)

    Nunan, Naoise; Daniell, Timothy J.; Singh, Brajesh K.; Papert, Artemis; McNicol, James W.; Prosser, James I.

    2005-01-01

    Molecular analysis of grassland rhizosphere soil has demonstrated complex and diverse bacterial communities, with resultant difficulties in detecting links between plant and bacterial communities. These studies have, however, analyzed “bulk” rhizosphere soil, rather than rhizoplane communities, which interact most closely with plants through utilization of root exudates. The aim of this study was to test the hypothesis that plant species was a major driver for bacterial rhizoplane community composition on individual plant roots. DNA extracted from individual roots was used to determine plant identity, by analysis of the plastid tRNA leucine (trnL) UAA gene intron, and plant-related bacterial communities. Bacterial communities were characterized by analysis of PCR-amplified 16S rRNA genes using two fingerprinting methods: terminal restriction fragment length polymorphisms (T-RFLP) and denaturing gradient gel electrophoresis (DGGE). Links between plant and bacterial rhizoplane communities could not be detected by visual examination of T-RFLP patterns or DGGE banding profiles. Statistical analysis of fingerprint patterns did not reveal a relationship between bacterial community composition and plant species but did demonstrate an influence of plant community composition. The data also indicated that topography and other, uncharacterized, environmental factors are important in driving bacterial community composition in grassland soils. T-RFLP had greater potential resolving power than DGGE, but findings from the two methods were not significantly different. PMID:16269710

  4. Combustion synthesis of advanced composite materials

    Science.gov (United States)

    Moore, John J.

    1993-01-01

    Self-propagating high temperature (combustion) synthesis (SHS), has been investigated as a means of producing both dense and expanded (foamed) ceramic and ceramic-metal composites, ceramic powders and whiskers. Several model exothermic combustion synthesis reactions were used to establish the importance of certain reaction parameters, e.g., stoichiometry, green density, combustion mode, particle size, etc. on the control of the synthesis reaction, product morphology and properties. The use of an in situ liquid infiltration technique and the effect of varying the reactants and their stoichiometry to provide a range of reactant and product species i.e., solids, liquids and gases, with varying physical properties e.g., volatility and thermal conductivity, on the microstructure and morphology of synthesized composite materials is discussed. Conducting the combustion synthesis reaction in a reactive gas environment to take advantage of the synergistic effects of combustion synthesis and vapor phase transport is also examined.

  5. Computational fluid dynamics (CFD) analysis of an industrial gas turbine combustion chamber

    Energy Technology Data Exchange (ETDEWEB)

    Anzai, Thiago Koichi; Fontes, Carlo Eduardo; Ropelato, Karolline [Engineering Simulation and Scientic Software Ltda. (ESSS), Rio de Janeiro, RJ (Brazil)], E-mails: anzai, carlos.fontes, ropelato@esss.com.br; Silva, Luis Fernando Figueira da; Huapaya, Luis Enrique Alva [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil). Dept. of Mechanical Engineering], E-mail: luisfer.luisalva@esp.puc-rio.br

    2010-07-01

    The accurate determination of pollutant emission from gas turbine combustors is a crucial problem in situations when such equipment is subject to long periods of operation away from the design point. In such operating conditions, the flow field structure may also drastically differ from the design point one, leading to the presence of undesirable hot spots or combustion instabilities, for instance. A priori experiments on all possible operation conditions is economically unfeasible, therefore, models that allow for the prediction of combustion behavior in the full operation range could be used to instruct power plant operators on the best strategies to be adopted. Since the direct numerical simulation of industrial combustors is beyond reach of the foreseeable computational resources, simplified models should be used for such purpose. This works presents the results of the application to an industrial gas turbine combustion chamber of the CFD technique to the prediction of the reactive flow field. This is the first step on the coupling of reactive CFD results with detailed chemical kinetics modeling using chemical reactor networks, toward the goal of accurately predicting pollutant emissions. The CFD model considers the detailed geometrical information of such a combustion chamber and uses actual operating conditions, calibrated via an overall gas turbine thermodynamical simulation, as boundary conditions. This model retains the basic information on combustion staging, which occurs both in diffusion and lean premixed modes. The turbulence has been modeled using the SST-CC model, which is characterized by a well established regime of accurate predictive capability. Combustion and turbulence interaction is accounted for by using the Zimont et al. model, which makes use of on empirical expression for the turbulent combustion velocity for the closure of the progress variable transport equation. A high resolution scheme is used to solve the advection terms of the

  6. Fluorescence techniques to detect and to assess viability of plant pathogenic bacteria

    NARCIS (Netherlands)

    Chitarra, L.G.

    2001-01-01

    Plant pathogenic bacteria cause major economic losses in commercial crop production worldwide every year. The current methods used to detect and to assess the viability of bacterial pathogens and to test seed lots or plants for contamination are usually based on plate assays or on serological techni

  7. Laser-based temperature diagnostics in practical combustion systems

    OpenAIRE

    Kronemayer, Helmut

    2007-01-01

    Today’s energy supply relies on the combustion of fossil fuels. This results in emissions of toxic pollutants and green-house gases that most likely influence the global climate. Hence, there is a large need for developing efficient combustion processes with low emissions. In order to achieve this, quantitative measurement techniques are required that allow accurate probing of important quantities, such as e.g. the gas temperature, in practical combustion devices. Diagnostic techniques: Ther...

  8. On supersonic combustion

    Institute of Scientific and Technical Information of China (English)

    袁生学

    1999-01-01

    Some basic concepts and features of supersonic combustion are explained from the view point of macroscopic aerodynamics. Two kinds of interpretations of supersonic combustion are proposed. The difference between supersonic combustion and subsonic combustion is discussed, and the mechanism of supersonic combustion propagation and the limitation of heat addition in supersonic flow are pointed out. The results of the calculation of deflagration in supersonic flow show that the entropy increment and the total pressure loss of the combustion products may decrease with the increase of combustion velocity. It is also demonstrated that the oblique detonation wave angle may not be controlled by the wedge angle under weak underdriven solution conditions and be determined only by combustion velocity. Therefore, the weak underdriven solution may become self-sustaining oblique detonation waves with a constant wave angle.

  9. Combustion Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — For more than 30 years The Combustion Research Facility (CRF) has served as a national and international leader in combustion science and technology. The need for a...

  10. Laser-diagnostic and plasma-technological fundamentals for reduction of emissions and fuel consumption of DI internal combustion engines. Sub-project: 2D light scattering and fluorescence techniques for analysis of charge stratification and combustion characteristics of DI internal combustion engines. Final report; Laserdiagnostische und plasmatechnologische Grundlagen zur Verminderung von Emissionen und Kraftstoffverbrauch von DI-Verbrennungsmotoren. Teilvorhaben: 2D-Streulicht- und Fluoreszenztechniken zur Analyse von Ladungsschichtung und Durchbrennverhalten bei der Benzindirekteinspritzung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Leipertz, A.; Egermann, J.; Ipp, W.; Wagner, V.

    2001-03-01

    The application of direct injection combustion concepts, which are based on inhomogeneous charge distribution, depend on the technical controllability of the charge over an entire range of speed and load. Especially the mixture condition at the ignition is important for the efficiency and the pollutant formation of the subsequent combustion process. In the frame of this research work laser based measurement techniques should be used and improved to investigate the interacting chain of injection, mixture formation, stratification and inflammation. Beside the already established Mie-scattering technique for the imagination of the liquid fuel distribution, the laser induced fluorescence was able to visualize the fuel vapor phase inside the engine. With this technique it was possible to show the interrelationship between worse engine running behavior and the qualitative fuel/air distribution (LIF-signal). In the frame of this project a two dimensional quantification of the relative air/fuel-ratio inside a fired transparent engine by LIF allows an improved judgement of the mixture formation process and a precise imagination of the stratification. The obtained information's are of importance to comprehend the combustion process and the causal connection of the pollutant formation. Only a few modifications had to be done at the experimental setup, compared to qualitative measurements. For a wide-spread acceptance of this concept the adoption of the model for using a multi-component fuel is required and will be one focal point of future research in this field of application. The Raman-technique became an important tool for the characterization of the mixture formation process during this project and has been used for a simultaneous verification of the LIF-results. This technique probably will be used only for research activities in the future because of its complex setup. (orig.) [German] Die Einsatzfaehigkeit direkteinspritzender ottomotorischer Brennverfahren, die

  11. Synthesis and Structural Characterization of Cu Substituted Ni-Zn Nano-Ferrites Prepared By Citrate-Gel Auto Combustion Technique

    Directory of Open Access Journals (Sweden)

    N. Hari Kumar

    2014-07-01

    Full Text Available The ferrite nano particles having chemical formula Ni0.2CuxZn0.8-xFe2O4 (where x=0.0 to 0.8 with step of 0.2 were synthesized by Citrate-Gel Auto Combustion method at low temperature. The synthesized powders were sintered at 500oC for 4 hours in air and characterised by XRD, SEM with EDS. XRD analysis of prepared samples were confirmed the single phase cubic spinel Structure. The crystallite size (D of prepared ferrites were in the range of 24-73nm. The values of lattice parameter (a decreased and X-ray density (dx were increased with the increasing of Cu substitution. The surface morphology of the prepared samples was investigated by Scanning Electron Microscope(SEM. An elemental composition of the samples was studied by Energy Dispersive Spectroscopy(EDS. The observed results can be explained on the basis of composition and crystal size.

  12. 电站锅炉无损检测新技术%New Nondestructive Testing Technique for Power Plant Boiler

    Institute of Scientific and Technical Information of China (English)

    姜斌; 王方; 萧艳彤

    2011-01-01

    Nondestructive testing is one of important technique to guarantee the safety of the power plant boiler.The new nondestructive testing techniques which used in power plant boiler were briefly introduced in this article.The merits and shortcomings of the new nondestructive testing methods, such as phased- array technique,ultrasonic guided wave technique, low frequency electromagnetic technique, Were also introduced.%无损检测技术在保障电站锅炉安全运行过程中发挥着十分重要的作用.引用了自2002年以来发展的在电站锅炉检验中应用的无损检测新技术文献8篇.对超声相控阵、超声导波和低频电磁等新兴无损检测技术在电站锅炉检验中的优缺点进行了分析.

  13. Quantitative Analysis of Variability and Uncertainty in Environmental Data and Models. Volume 2. Performance, Emissions, and Cost of Combustion-Based NOx Controls for Wall and Tangential Furnace Coal-Fired Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Frey, H. Christopher [North Carolina State University, Raleigh, NC (United States); Tran, Loan K. [North Carolina State University, Raleigh, NC (United States)

    1999-04-30

    This is Volume 2 of a two-volume set of reports describing work conducted at North Carolina State University sponsored by Grant Number DE-FG05-95ER30250 by the U.S. Department of Energy. The title of the project is “Quantitative Analysis of Variability and Uncertainty in Acid Rain Assessments.” The work conducted under sponsorship of this grant pertains primarily to two main topics: (1) development of new methods for quantitative analysis of variability and uncertainty applicable to any type of model; and (2) analysis of variability and uncertainty in the performance, emissions, and cost of electric power plant combustion-based NOx control technologies. These two main topics are reported separately in Volumes 1 and 2.

  14. Full scope simulator of a nuclear power plant control room using 3D stereo virtual reality techniques for operators training

    Energy Technology Data Exchange (ETDEWEB)

    Aghina, Mauricio A.C.; Mol, Antonio Carlos A.; Almeida, Adino Americo A.; Pereira, Claudio M.N.A. [Instituto de Engenharia Nuclear (IEN-CNEN/RJ), Rio de Janeiro, RJ (Brazil)]. E-mails: mag@ien.gov.br; mol@ien.gov.br; adino@ien.gov.br; cmnap@ien.gov.br; Varela, Thiago F.B. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Engenharia Eletrica]. E-mail: phillips.rj@terra.com.br; Cunha, Gerson G. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Lab. de Metodos Computacionais em Engenharia (LAMCE)]. E-mail: gerson@lance.ufrj.br

    2007-07-01

    Practical training of nuclear power plants operators are partially performed by means of simulators. Usually these simulators are physical copies of the original control roam, needing a large space on a facility being also very expensive. In this way, the proposal of this paper is to implement the use of Virtual Reality techniques to design a full scope control room simulator, in a manner to reduce costs and physical space usage. (author)

  15. Comparison of optimization techniques applied to nuclear fuel reload design; Comparacion de tecnicas de optimizacion aplicadas al diseno de la recarga de combustible nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, J.J.; Castillo, A.; Montes, J.L.; Perusquia, R. [ININ, Carretera Mexico-Toluca s/n, 52750 La Marquesa, Ocoyoacac Estado de Mexico (Mexico)]. e-mail: jjortiz@nuclear.inin.mx

    2007-07-01

    In this work a comparison of three techniques of optimization is presented applied to the design of the recharge of fuel in reactors of water in boil. In short, the techniques were applied to the design of a recharge of a cycle of balance of 18 months of the Laguna Verde Nucleo electric Central. The used techniques were Genetic Algorithms, Taboo Search and Neural Nets. The conditions to apply the different techniques were the same ones. The comparison of the results quality and the computational resources required to obtain them, it indicates that with the Taboo Search better results are achieved but the computational cost is very big. On the other hand the neural net with low computational cost obtains acceptable results. Additionally to this comparison, in this work a summary of the works that have been carried out for the fuel recharges optimization from the years 60 until the present time is presented. (Author)

  16. Monitoring of growth dynamics of plants under the influence of cadmium using a highly sensitive interferometry technique

    Science.gov (United States)

    Kanchana Muthumali De Silva, Kokge Thilini; Rajagopalan, Uma Maheswari; Kadono, Hirofumi

    2016-12-01

    Using statistical interferometry technique (SIT), a highly sensitive interferometry technique developed in our laboratory, we reported about the existence of nanometric intrinsic fluctuations (NIF) in a variety of plants. SIT permits noncontact, noninvasive, and fast detection of plant growth fluctuations in subnanometer scale. We propose the application of NIF to investigate the effect of heavy metal, cadmium, on growth dynamics of Chinese chive (Allium tuberosum). NIFs of leaves were observed for 3 days under four different concentrations of CdCl2: 0, 0.001, 0.01, and 0.1 mM. Results showed significant reduction of NIFs within 4 h for all Cd concentrations, and there was a further decrease with the exposure time of Cd under 0.1 and 0.01 mM. In addition, under 0.001 mM, a significant recovery could be observed after a rapid reduction in the first 4 h. As a comparison, measured antioxidative enzymes increased with increasing Cd concentration. However, no significant increase could be seen within the initial 4 h under a smaller concentration of 0.001 mM as seen for NIFs. The results imply that NIF can be used as an indicator for heavy metal stress on plants as well as it can be more sensitive to detect the influence of smaller Cd amounts on plants at an early stage.

  17. Simultaneous determination of bromine and iodine in milk powder for adult and infant nutrition by plasma based techniques after digestion using microwave-induced combustion

    Energy Technology Data Exchange (ETDEWEB)

    Picoloto, Rochele S. [Núcleo de Química, Universidade Tecnológica Federal do Paraná, 85884-000 Medianeira, PR (Brazil); Doneda, Morgana [Departamento de Química, Universidade Federal de Santa Maria, 97105-900 Santa Maria, RS (Brazil); Flores, Eder L.M. [Núcleo de Química, Universidade Tecnológica Federal do Paraná, 85884-000 Medianeira, PR (Brazil); Mesko, Marcia F. [Centro de Ciências Químicas, Farmacêuticas e de Alimentos, Universidade Federal de Pelotas, 96010-610 Pelotas, RS (Brazil); Flores, Erico M.M. [Departamento de Química, Universidade Federal de Santa Maria, 97105-900 Santa Maria, RS (Brazil); Mello, Paola A., E-mail: paola.mello@ufsm.br [Departamento de Química, Universidade Federal de Santa Maria, 97105-900 Santa Maria, RS (Brazil)

    2015-05-01

    In this work, bromine and iodine determination in milk powder for adult and infant nutrition was performed by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) after digestion by microwave-induced combustion (MIC). Contrarily to previous works using MIC, a higher sample mass was digested (700 mg). Water and ammonium hydroxide (10 to 100 mmol L{sup −1}) were investigated as absorbing solutions and accurate results were achieved using a 25 mmol L{sup −1} NH{sub 4}OH solution. Moreover, the high stability of analytes after digestion (up to 30 days) using this solution was observed. The accuracy of the proposed MIC method was evaluated using certified and reference materials of milk powder (NIST 1549 and NIST 8435). No statistical difference was observed between results obtained by MIC-ICP-MS and reference values. Results for samples were also compared with those obtained by ICP-OES and no statistical difference was observed. Microwave-assisted alkaline extraction (MW-AE) was also evaluated for milk powder using NH{sub 4}OH and tetramethylammonium hydroxide solutions. Solutions obtained after digestion by MIC (whole milk powder) presented low carbon content in digests (< 25 mg L{sup −1}) while solutions obtained after alkaline extraction presented up to 10,000 mg L{sup −1} of C. MIC method was preferable in view of the possibility of obtaining solutions with low carbon content even using a relatively high sample mass (up to 700 mg) avoiding additional dilution prior to ICP-MS analysis, thus allowing better detection limits. Limits of detection obtained by MIC-ICP-MS were 0.007 and 0.003 μg g{sup −1} for Br and I, respectively, while for MW-AE were 0.1 and 0.05 μg g{sup −1} respectively for Br and I. Among the main advantages of the proposed method are the use of diluted alkaline solutions that is in agreement with green analytical chemistry recommendations, the high stability of

  18. Claus recycle with double combustion process

    Energy Technology Data Exchange (ETDEWEB)

    El-Bishtawi, Ribhi; Haimour, No' man [University of Jordan, Amman 11942 (Jordan)

    2004-12-15

    A new modification is developed on conventional Claus process to increase the overall sulfur recovery as well as to decrease the costs. The modification combines both oxygen enrichment and recycling. The process is simulated and studied for various N{sub 2}/O{sub 2} ratios with and without using SURE double combustion technique. The predictions show that using pure oxygen in combustion, condensing water vapor in a condenser following the first sulfur condenser and recycling the effluent gas to combine it with fresh acid gas feed leads to large savings in the production cost and to a clean environment. However, it leads to a high adiabatic flame temperature which exceeds the maximum allowable temperature of the furnace material of construction as well as its refractory. To avoid these effects, it is necessary to use SURE double combustion technique. The oxygen flow rate to the first combustion stage should not exceed 78% O{sub 2}.

  19. A technique for monitoring SO2 in combustion exhausts: Use of a non-Nernstian sensing element in combination with an upstream catalytic filter

    Energy Technology Data Exchange (ETDEWEB)

    West, David L [ORNL; Montgomery, Fred C [ORNL; Armstrong, Timothy R. [ORNL

    2009-01-01

    Detection of sulfur dioxide (SO2) at high temperature (600 750 oC) in the presence of some interferents found in typical combustion exhausts (oxides of nitrogen (NO2 and NO, "NOx"), CO2, CO, and hydrocarbon (C3H6)) is described. The detection scheme involves use of a catalytic filter in front of a non-Nernstian sensing element. The catalytic filter was a Ni:Cr powder bed operating at 850 oC and the sensing elements were pairs of platinum (Pt) and oxide (Ba-promoted copper chromite ((Ba,Cu)xCryOz) and Sr-modified lanthanum ferrite (LSF)) electrodes on yttria-stabilized zirconia. The Ni:Cr powder bed was capable of reducing the sensing element response to NOx, CO, and C3H6, but the presence of NOx (100 ppm by volume) still interfered with the SO2 response of the Pt-(Ba,Cu)xCryOz sensing element at 600 oC, causing approximately a 7 mV (20%) reduction in the response to 120 ppm SO2 and a response equivalent to about 20 ppm SO2 in the in the absence of SO2. The Pt-LSF sensing element, operated at 750 oC, did not suffer from this NOx interference but at the cost of a reduced SO2 response magnitude (120 ppm SO2 yielded ~10 mV, in contrast to ~30 mV for the Pt-(Ba,Cu)xCryOz sensing element). The powder bed and Pt-LSF sensing element were operated continuously over approximately 350 hours, and the response to SO2 drifted downward by about 7%, with most of this change occurring during the initial 100 hours of operation.

  20. Innovative Clean Coal Technology (ICCT): 500 MW demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. Third quarterly technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-31

    This quarterly report discusses the technical progress of an Innovative Clean Coal Technology (ICCT) demonstration of advanced wall-fired combustion techniques for the reduction of nitrogen oxide (NO{sub x}) emissions from coal-fired boilers. The project provides a stepwise retrofit of an advanced overfire air (AOFA) system followed by low NO{sub x} burners (LNB). During each test phase of the project, diagnostic, performance, long-term, and verification testing will be performed. These tests are used to quantify the NO{sub x} reductions of each technology and evaluate the effects of those reductions on other combustion parameters such as particulate characteristics and boiler efficiency. Baseline, AOFA, LNB, and LNB plus AOFA test segments have been completed. Analysis of the 94 days of LNB long-term data collected show the full-load NO{sub x} emission levels to be approximately 0.65 lb/MBtu with fly ash LOI values of approximately 8 percent. Corresponding values for the AOFA configuration are 0.94 lb/MBtu and approximately 10 percent. For comparison, the long-term full-load, baseline NO{sub x} emission level was approximately 1.24 lb/MBtu at 5.2 percent LOI. Comprehensive testing in the LNB+AOFA configuration indicate that at full-load, NO{sub x} emissions and fly ash LOI are near 0.40 lb/MBtu and 8 percent, respectively. However, it is believed that a substantial portion of the incremental change in NO{sub x} emissions between the LNB and LNB+AOFA configurations is the result of additional burner tuning and other operational adjustments and is not the result of the AOFA system. During this quarter, LNB+AOFA testing was concluded. Testing performed during this quarter included long-term and verification testing in the LNB+AOFA configuration.

  1. Biochar as carrier for plant nutrients and microorganisms - techniques of agro-activation

    Science.gov (United States)

    Schmidt, H.-P.

    2012-04-01

    The soil enhancing qualities of biochar are strongly linked to its influence on nutrient cycling dynamics, sorption dynamics and to changing habitat condition for soil fauna. But as shown in multiple studies, the addition of pure biochar to agricultural soils may provoke reduced plant growth caused by the immobilisation of plant nutrients. The very potent sorption dynamics of biochar makes it an effective carrier for plant nutrients and plant-root symbiotic microorganisms. At the Delinat-Institute, we tried sundry methods of charging biochars with organic and mineral plant nutrients as well as with microorganisms. This includes the use of biochar as bulk agent in aerobic composting, in malolactic fermentation and as treatment for liquid manure, but also formulations of mineral carbon-fertilizers. Those biochar products are tested in pot and also large scale field trials. Results and experiences of these trials as well as different activation methods will be explained. A short overview of industrial designing of biochar based products will be given.

  2. Simultaneous determination of bromine and iodine in milk powder for adult and infant nutrition by plasma based techniques after digestion using microwave-induced combustion

    Science.gov (United States)

    Picoloto, Rochele S.; Doneda, Morgana; Flores, Eder L. M.; Mesko, Marcia F.; Flores, Erico M. M.; Mello, Paola A.

    2015-05-01

    In this work, bromine and iodine determination in milk powder for adult and infant nutrition was performed by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) after digestion by microwave-induced combustion (MIC). Contrarily to previous works using MIC, a higher sample mass was digested (700 mg). Water and ammonium hydroxide (10 to 100 mmol L- 1) were investigated as absorbing solutions and accurate results were achieved using a 25 mmol L- 1 NH4OH solution. Moreover, the high stability of analytes after digestion (up to 30 days) using this solution was observed. The accuracy of the proposed MIC method was evaluated using certified and reference materials of milk powder (NIST 1549 and NIST 8435). No statistical difference was observed between results obtained by MIC-ICP-MS and reference values. Results for samples were also compared with those obtained by ICP-OES and no statistical difference was observed. Microwave-assisted alkaline extraction (MW-AE) was also evaluated for milk powder using NH4OH and tetramethylammonium hydroxide solutions. Solutions obtained after digestion by MIC (whole milk powder) presented low carbon content in digests (< 25 mg L- 1) while solutions obtained after alkaline extraction presented up to 10,000 mg L- 1 of C. MIC method was preferable in view of the possibility of obtaining solutions with low carbon content even using a relatively high sample mass (up to 700 mg) avoiding additional dilution prior to ICP-MS analysis, thus allowing better detection limits. Limits of detection obtained by MIC-ICP-MS were 0.007 and 0.003 μg g- 1 for Br and I, respectively, while for MW-AE were 0.1 and 0.05 μg g- 1 respectively for Br and I. Among the main advantages of the proposed method are the use of diluted alkaline solutions that is in agreement with green analytical chemistry recommendations, the high stability of analytes in solution and the suitability of digests for

  3. SPECIFIC EMISSIONS FROM BIOMASS COMBUSTION

    Directory of Open Access Journals (Sweden)

    Pavel Skopec

    2014-02-01

    Full Text Available This paper deals with determining the specific emissions from the combustion of two kinds of biomass fuels in a small-scale boiler. The tested fuels were pellets made of wood and pellets made of rape plant straw. In order to evaluate the specific emissions, several combustion experiments were carried out using a commercial 25 kW pellet-fired boiler. The specific emissions of CO, SO2 and NOx were evaluated in relation to a unit of burned fuel, a unit of calorific value and a unit of produced heat. The specific emissions were compared with some data acquired from the reference literature, with relatively different results. The differences depend mainly on the procedure used for determining the values, and references provide no information about this. Although some of our experimental results may fit with one of the reference sources, they do not fit with the other. The reliability of the references is therefore disputable.

  4. Combustion aerosols from co-firing of coal and solid recovered fuel in a 400 mw pf-fired power plant

    DEFF Research Database (Denmark)

    Pedersen, Anne Juul; Wu, Hao; Jappe Frandsen, Flemming;

    2010-01-01

    to be bi-modal, with an ultrafine (vaporization) mode centered around 0.1 μm, and a coarser (finefragmentation) mode above 2 μm. Co-firing of SRF tended to increase the formation of ultrafine particles as compared with dedicated coal combustion, while the coarse mode tended to decrease. The increased...... formation of ultrafine particles was probably caused by a relatively higher volatility (and subsequent enhanced homogeneous condensation) of Ca, P and K during co-firing of SRF. The influence of SRF type, thermal fraction, particle size and injection position was however not evident from our data, probably...... due to the inhomogeneous characteristics of SRF. S was found to be a special case. While the concentration of S was decreased in the ultrafine particles from co-firing (in consistence with a low initial concentration in SRF), the concentration of S in the electrostatic precipitator ash was higher...

  5. Performance enhancement for crystallization unit of a sugar plant using genetic algorithm technique

    Science.gov (United States)

    Tewari, P. C.; Khanduja, Rajiv; Gupta, Mahesh

    2012-05-01

    This paper deals with the performance enhancement for crystallization unit of a sugar plant using genetic algorithm. The crystallization unit of a sugar industry has three main subsystems arranged in series. Considering exponential distribution for the probable failures and repairs, the mathematical formulation of the problem is done using probabilistic approach, and differential equations are developed on the basis of Markov birth-death process. These equations are then solved using normalizing conditions so as to determine the steady-state availability of the crystallization unit. The performance of each subsystem of crystallization unit in a sugar plant has also been optimized using genetic algorithm. Thus, the findings of the present paper will be highly useful to the plant management for the timely execution of proper maintenance decisions and, hence, to enhance the system performance.

  6. Characterization of soil contamination by using environmental magnetic techniques: example of the Ribatejo power plant

    Science.gov (United States)

    Braga Mendes, Ana Rita; Font, Eric; Andrade, Mariana

    2017-04-01

    Soil contamination resulting from power plant atmospheric emissions represents a major problem for soil management, water resource and agriculture. Here, we studied the contamination of soils located close to the Ribatejo power plant, near Carregado, Portugal. We used magnetic susceptibility (MS), isothermal remanent magnetization (IRM) curves and frequency-dependent magnetic susceptibility (Kfd) in order to identify the concentration and grainsize of anthropogenic magnetic particles. Separation of natural (background) and anthropogenic magnetic particles is achieved by studying several sites located close (polluted) and far (background) from the Ribatejo power plant. Vertical variations of magnetic particle content at each site provide information about the depth at which anthropogenic particles are maximum, and allow discussing the influence of downward fluid percolation within the different soil horizons.

  7. Radiation dose rate map interpolation in nuclear plants using neural networks and virtual reality techniques

    Energy Technology Data Exchange (ETDEWEB)

    Mol, Antonio Carlos A., E-mail: mol@ien.gov.br [Comissao Nacional de Energia Nuclear, Instituto de Engenharia Nuclear Rua Helio de Almeida, 75, Ilha do Fundao, P.O. Box 68550, 21941-906 Rio de Janeiro, RJ (Brazil); Instituto Nacional de Ciencia e Tecnologia de Reatores Nucleares Inovadores/CNPq (Brazil); Pereira, Claudio Marcio N.A., E-mail: cmnap@ien.gov.br [Comissao Nacional de Energia Nuclear, Instituto de Engenharia Nuclear Rua Helio de Almeida, 75, Ilha do Fundao, P.O. Box 68550, 21941-906 Rio de Janeiro, RJ (Brazil); Instituto Nacional de Ciencia e Tecnologia de Reatores Nucleares Inovadores/CNPq (Brazil); Freitas, Victor Goncalves G. [Universidade Federal do Rio de Janeiro, Programa de Engenharia Nuclear, Rio de Janeiro, RJ (Brazil); Jorge, Carlos Alexandre F., E-mail: calexandre@ien.gov.br [Comissao Nacional de Energia Nuclear, Instituto de Engenharia Nuclear Rua Helio de Almeida, 75, Ilha do Fundao, P.O. Box 68550, 21941-906 Rio de Janeiro, RJ (Brazil)

    2011-02-15

    This paper reports the most recent development results of a simulation tool for assessment of radiation dose exposition by nuclear plant's personnel, using artificial intelligence and virtual reality technologies. The main purpose of this tool is to support training of nuclear plants' personnel, to optimize working tasks for minimisation of received dose. A finer grid of measurement points was considered within the nuclear plant's room, for different power operating conditions. Further, an intelligent system was developed, based on neural networks, to interpolate dose rate values among measured points. The intelligent dose prediction system is thus able to improve the simulation of dose received by personnel. This work describes the improvements implemented in this simulation tool.

  8. Radar Plant and Measurement Technique for Determination of the Orientation and the Depth of Buried Objects

    DEFF Research Database (Denmark)

    1999-01-01

    A plant for generation of information indicative of the depth and the orientation of an object positioned below the surface of the ground is adapted to use electromagnetic radiation emitted from and received by an antenna system associated with the plant. The plant has a transmitter and a receiver...... for generation of the electromagnetic radiation in cooperation with the antenna system mentioned and for reception of the electromagnetic radiation reflected by the object in cooperation with the antenna system, respectively. The antenna system includes a plurality of individual antenna elements such as dipole...... the antenna system and thus polarizing the electromagnetic field around or in relation to the geometric center of the antenna system....

  9. A Bird’s-Eye View of Molecular Changes in Plant Gravitropism Using Omics Techniques

    Science.gov (United States)

    Schüler, Oliver; Hemmersbach, Ruth; Böhmer, Maik

    2015-01-01

    During evolution, plants have developed mechanisms to adapt to a variety of environmental stresses, including drought, high salinity, changes in carbon dioxide levels and pathogens. Central signaling hubs and pathways that are regulated in response to these stimuli have been identified. In contrast to these well studied environmental stimuli, changes in transcript, protein and metabolite levels in response to a gravitational stimulus are less well understood. Amyloplasts, localized in statocytes of the root tip, in mesophyll cells of coleoptiles and in the elongation zone of the growing internodes comprise statoliths in higher plants. Deviations of the statocytes with respect to the earthly gravity vector lead to a displacement of statoliths relative to the cell due to their inertia and thus to gravity perception. Downstream signaling events, including the conversion from the biophysical signal of sedimentation of distinct heavy mass to a biochemical signal, however, remain elusive. More recently, technical advances, including clinostats, drop towers, parabolic flights, satellites, and the International Space Station, allowed researchers to study the effect of altered gravity conditions – real and simulated micro- as well as hypergravity on plants. This allows for a unique opportunity to study plant responses to a purely anthropogenic stress for which no evolutionary program exists. Furthermore, the requirement for plants as food and oxygen sources during prolonged manned space explorations led to an increased interest in the identi-fication of genes involved in the adaptation of plants to microgravity. Transcriptomic, proteomic, phosphoproteomic, and metabolomic profiling strategies provide a sensitive high-throughput approach to identify biochemical alterations in response to changes with respect to the influence of the gravitational vector and thus the acting gravitational force on the transcript, protein and metabolite level. This review aims at summarizing

  10. A bird’s-eye view of molecular changes in plant gravitropism using omics techniques

    Directory of Open Access Journals (Sweden)

    Oliver eSchüler

    2015-12-01

    Full Text Available During evolution, plants have developed mechanisms to adapt to a variety of environmental stresses, including drought, high salinity, changes in carbon dioxide levels and pathogens. Central signaling hubs and pathways that are regulated in response to these stimuli have been identified. In contrast to these well studied environmental stimuli, changes in transcript, protein and metabolite levels in response to a gravi¬tational stimulus are less well understood. Amyloplasts, localized in statocytes of the root tip, in meso¬phyll cells of coleoptiles and in the elongation zone of the growing internodes comprise statoliths in higher plants. Deviations of the statocytes with respect to the earthly gravity vector lead to a displacement of statoliths relative to the cell due to their inertia and thus to gravity perception. Down¬stream signaling events, including the conversion from the biophysical signal of sedi¬men¬tation of distinct heavy mass to a biochemical signal, however, remain elusive. More recently, technical advances, including clinostats, drop towers, parabolic flights, satellites and the International Space Station, allowed researchers to study the effect of altered gravity conditions - real and simulated micro- as well as hypergravity on plants. This allows for a unique opportunity to study plant responses to a purely anthropogenic stress for which no evolutionary program exists. Furthermore, the requirement for plants as food and oxygen sources during prolonged manned space explorations led to an increased interest in the identification of genes involved in the adaptation of plants to microgravity.Transcriptomic, proteomic, phosphoproteomic, and metabolomic profiling strategies provide a sensitive high-throughput approach to identify biochemical alterations in response to changes with respect to the influence of the gravitational vector and thus the acting gravitational force on the transcript, protein and metabolite level. This

  11. Understanding and Modelling the Effect of Dissolved Metals on Solvent Degradation in Post Combustion CO2 Capture Based on Pilot Plant Experience

    Directory of Open Access Journals (Sweden)

    Sanjana Dhingra

    2017-05-01

    Full Text Available Oxidative degradation is a serious concern for upscaling of amine-based carbon capture technology. Different kinetic models have been proposed based on laboratory experiments, however the kinetic parameters included are limited to those relevant for a lab-scale system and not a capture plant. Besides, most of the models fail to recognize the catalytic effect of metals. The objective of this work is to develop a representative kinetic model based on an apparent auto-catalytic reaction mechanism between solvent degradation, corrosion and ammonia emissions. Measurements from four different pilot plants: (i EnBW’s plant at Heilbronn, Germany (ii TNO’s plant at Maasvlakte, The Netherlands; (iii CSIRO’s plants at Loy Yang and Tarong, Australia and (iv DONG Energy’s plant at Esbjerg, Denmark are utilized to propose a degradation kinetic model for 30 wt % ethanolamine (MEA as the capture solvent. The kinetic parameters of the model were regressed based on the pilot plant campaign at EnBW. The kinetic model was validated by comparing it with the measurements at the remaining pilot campaigns. The model predicted the trends of ammonia emissions and metal concentration within the same order of magnitude. This study provides a methodology to establish a quantitative approach for predicting the onset of unacceptable degradation levels which can be further used to devise counter-measure strategies such as reclaiming and metal removal.

  12. Possibilities of Utilization the Risk – Based Techniques in the Field of Offshore Wind Power Plants

    Directory of Open Access Journals (Sweden)

    Przemysław Kacprzak

    2014-09-01

    Full Text Available In the article the risk-based concept that may be applicable to offshore wind power plants has been presented. The aim of the concept is to aid designers in the early design and retrofit phases of the project in case of lack or insufficient information in relevant international standards. Moreover the initial classification of components within main system parts of offshore wind power plant has been performed. Such classification is essential in order to apply risk-based concept. However further scientific researches need to be performed in that field to develop detailed concept useful for future practical applications.

  13. Identification of the medicinal plants in Aconitum L. by DNA barcoding technique.

    Science.gov (United States)

    He, Jun; Wong, Ka-Lok; Shaw, Pang-Chui; Wang, Hong; Li, De-Zhu

    2010-10-01

    Plants of the genus Aconitum L. are commonly used in Asia for medicinal purposes. Although they are widely cultivated and marketed, there has been uncertainty about the efficacy of different species, and therefore accurate identification is crucial. To determine the genetic variation among these medicinal plants, the proposed DNA barcode PSBA- TRNH intergenic spacer of 134 individuals from 19 taxa of ACONITUM were sequenced. Among the two most commonly used medicinal ACONITUM species, A. carmichaeli and A. kusnezoffii, sequence inversions were observed. The studied samples were clustered into ten groups according to the sequence alignment and most of the tested Aconitum species could be differentiated by the PSBA -TRNH intergenic spacer.

  14. Study of evaluation techniques of software testing and V and V in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Youn, Cheong; Baek, Y. W.; Kim, H. C.; Shin, C. Y.; Park, N. J. [Chungnam Nationl Univ., Taejon (Korea, Republic of)

    2000-03-15

    The study of activities to solve software safety and quality must be executed in base of establishing software development process for digitalized nuclear plant. Especially study of software testing and verification and validation must executed. For this purpose methodologies and tools which can improve software qualities are evaluated and software testing and V and V which can be applied to software life cycle are investigated. This study establish a guideline that can assure software safety and reliability requirements in digitalized nuclear plant systems and can be used as a guidebook of software development process to assure software quality many software development organization.

  15. Application of linear programming techniques for controlling linear dynamic plants in real time

    Science.gov (United States)

    Gabasov, R.; Kirillova, F. M.; Ha, Vo Thi Thanh

    2016-03-01

    The problem of controlling a linear dynamic plant in real time given its nondeterministic model and imperfect measurements of the inputs and outputs is considered. The concepts of current distributions of the initial state and disturbance parameters are introduced. The method for the implementation of disclosable loop using the separation principle is described. The optimal control problem under uncertainty conditions is reduced to the problems of optimal observation, optimal identification, and optimal control of the deterministic system. To extend the domain where a solution to the optimal control problem under uncertainty exists, a two-stage optimal control method is proposed. Results are illustrated using a dynamic plant of the fourth order.

  16. Combustion Analysis of Different Olive Residues

    Directory of Open Access Journals (Sweden)

    Antonio Ruiz

    2008-04-01

    Full Text Available The Thermogravimetric Analysis (TGA techniques and concretely the study of the burning profile provide information that can be used to estimate the behaviour of the combustion of carbonous materials. Commonly, these techniques have been used for the study of carbons, but are also interesting for the analysis of biomass wastes, due to the different species present on the wastes affect directly to its thermal properties. In this work, techniques of thermal analysis have been applied to compare the behaviour of different wastes coming from olive oil mills. From these results, it is remarkable that the Concentrated Olive Mill Waste Water (COMWW presents more unfavourable conditions for its combustion.

  17. Towards numerical simulation of turbulent hydrogen combustion based on flamelet generated manifolds in OpenFOAM

    Science.gov (United States)

    Fancello, A.; Bastiaans, R. J. M.; de Goey, L. P. H.

    2013-10-01

    This work proposes an application of the Flamelet-Generated Manifolds (FGM) technique in the OpenFOAM environment. FGM is a chemical reduced method for combustion modeling. This technique treats the combustion process as the solution of a small amount of controlling variables. Regarding laminar simulation, a progress variable and enthalpy evolution can describe satisfactorily the problem. From a turbulent point of view, FGM can be applied to LES and RANS simulations, where the subgrid chemical terms are described with a β - PDF approach. These approaches apply satisfactorily in relatively simple gases, nevertheless for hydrogen are not more valid, due to preferential diffusion effects and instability of the flame structure. The overall aim of this research is to find technical solution for hydrogen gas turbines design in the next generation of Integrated Gasification Combined Cycle (IGCC) plants.

  18. ANALYSIS OF INTERNAL COMBUSTION ENGINE WITH A NEW CONCEPT OF POROUS MEDIUM COMBUSTION FOR THE FUTURE CLEAN ENGINE

    Directory of Open Access Journals (Sweden)

    Ashok A Dhale

    2010-01-01

    Full Text Available At present, the emissions of internal combustion engine can only be improved by catalytic treatments of the exhaust gases. Such treatments, however, result in high costs and relatively low conversion efficiency. This suggests that a new combustion technique should be developed to yield improved primary combustion processes inside the engine with drastically reduced exhaust gas emissions. To fulfill all requirements, Dr. Franz Drust has proposed a new combustion concept to perform homogenous combustion in internal combustion engines. This concept used the porous medium combustion technique and is called "PM-engine". It is shown that the PM combustion technique can be applied to internal combustion engines. Theoretical considerations are presented for internal combustion engines, indicating that an overall improvement in thermal efficiency can be achieved for the PM-engine. This is explained and general performance of the new PM-engines is demonstrated for a single cylinder, water cooled, direct injection diesel engine. Verification of experiments at primary stage is described that were carried out as a part of the present study.

  19. A common soil handling technique can generate incorrect estimates of soil biota effects on plants

    Science.gov (United States)

    Several plant-soil biota (PSB) studies were recently published in high profile journals that used the suspect “mixed soil sampling” methodology. To explore the extent to which mixing field samples (i.e. employing mixed soil sample designs) can generate erroneous conclusions, we used real data to pa...

  20. Screening of plants containing Naja naja siamensis cobra venom inhibitory activity using modified ELISA technique.

    Science.gov (United States)

    Daduang, Sakda; Sattayasai, Nison; Sattayasai, Jintana; Tophrom, Pattara; Thammathaworn, Achra; Chaveerach, Arunrat; Konkchaiyaphum, Monruedee

    2005-06-15

    Enzyme-linked immunosorbent assay (ELISA) has been modified for screening plants with antagonistic activity to Naja naja siamensis cobra venom. Aqueous extracts from plants were investigated for their inhibitory effects on the binding of anti-cobra venom antibody to antigen, cobra venom, fixed onto 96-well microtiter plates. Ingredients in extracts were allowed to react with immobilized venom before the subsequent addition of antivenom antibody. Venom components affected by exposure to the extracts, unable to interact with their specific antibody, were predicted to be unable to bind to their native destinations or natural receptors. Curcuma cf. zedoaria, an old Thai medicinal plant, showed clear inhibitory activity in the ELISA test. Neurotoxin and protein degradative enzymes, major components in venom, were identified as targets of this extract in Western immunoblotting analysis. Ingredients in the extract showed high affinity to the toxin in competition assay by immunoprecipitation. The extract attenuated toxin activity by extending contraction time of diaphragm muscle after envenomation and had a potency to protect cellular proteins from venom degradative enzymes. Curcuma parviflora, with less activity in ELISA, exhibited acceptable results in two experiments but negative results in two experiments, whereas Curcuma longa, having low activity in the ELISA test, never showed any favorable results. Screening of 36 samples could classify plants into an inhibition range of 0 to 86%. This modified ELISA is recommended as a preliminary screening method for inhibitors with a large number of samples.

  1. Proposing a new advanced control technique for micro hydro power plants

    Energy Technology Data Exchange (ETDEWEB)

    Hanmandlu, M.; Goyal, Himani [Department of Electrical Engineering, Indian Institute of Technology, Hauz Khas, New Delhi 110016 (India)

    2008-05-15

    Micro hydropower plants are emerging as a major renewable energy resource today as they do not encounter the problems of population displacement and environmental problems associated with the large hydro power plants. However, they require control systems to limit the huge variation in input flows expected in rivulets over which these are established to produce a constant power supply. This paper proposes an electric servomotor as a governor for a micro hydro power plant especially those plants that are operated in isolated mode. An advanced controller is developed combining four control schemes for the control of the governor following the concept that the control action can be split up into linear and non-linear parts. The linear part of this controller contains an adaptive fast transversal filter (FTF) algorithm and normalized LMS (nLMS) algorithm. The non-linear part of the controller incorporates Fuzzy PI and a neural network. The concept behind splitting the control action is reasoned out and the conditions for stability of the controller are proved. The new controller has a superior performance compared to other control schemes. (author)

  2. A study of poultry processing plant noise characteristics and potential noise control techniques

    Science.gov (United States)

    Wyvill, J. C.; Jape, A. D.; Moriarity, L. J.; Atkins, R. D.

    1980-01-01

    The noise environment in a typical poultry processing plant was characterized by developing noise contours for two representative plants: Central Soya of Athens, Inc., Athens, Georgia, and Tip Top Poultry, Inc., Marietta, Georgia. Contour information was restricted to the evisceration are of both plants because nearly 60 percent of all process employees are stationed in this area during a normal work shift. Both plant evisceration areas were composed of tile walls, sheet metal ceilings, and concrete floors. Processing was performed in an assembly-line fashion in which the birds travel through the area on overhead shackles while personnel remain at fixed stations. Processing machinery was present throughout the area. In general, the poultry processing noise problem is the result of loud sources and reflective surfaces. Within the evisceration area, it can be concluded that only a few major sources (lung guns, a chiller component, and hock cutters) are responsible for essentially all direct and reverberant sound pressure levels currently observed during normal operations. Consequently, any effort to reduce the noise problem must first address the sound power output of these sources and/or the absorptive qualitities of the room.

  3. Evaluation of trace elements in some northern-Nigeria traditional medicinal plants using INAA technique

    Energy Technology Data Exchange (ETDEWEB)

    Oladipo, M.O.A., E-mail: oaoladipo2004@yahoo.com [Centre for Energy Research and Training, Ahmadu Bello University, Zaria (Nigeria); Njinga, R.L., E-mail: njingaraymond@yahoo.co.uk [Physics Department, Ibrahim Badamasi Babangida University, Lapai, Niger State (Nigeria); Baba, A. [Physics Department, Ibrahim Badamasi Babangida University, Lapai, Niger State (Nigeria); Muhammad, H.L. [Chemistry Department, Ibrahim Badamasi Babangida University, Lapai, Niger State (Nigeria)

    2012-06-15

    Instrumental neutron activation analysis was used for multi-trace elemental determination of six medicinal plants: Boerhavia diffusa, Euphoria hirta, Senna occidentalis, Senna obtusofolia, Cyprus dilatatus and Mitracarpus villosu. These plants were irradiated in the Nigeria Research reactor-1, at flux levels of 2.25E+11 ncm{sup -2}s{sup -1} in the outer channel and 5.0E+11 ncm{sup -2}s{sup -1} in the inner channel. A total of the twenty one elemental concentrations were evaluated highlighted the similarity between the elements obtained for the six plants. It was found that Euphoria hirta and Senna occidentalis have similar concentrations of elements. Boerhavia difusa, Mitracarpus villosus, Cyprus dilatalus and Senna obttusifolia were also similar in elemental content to each other, while Boerhavia difusa was the only exceptional outlier. The accuracy of measurements was evaluated by analyzing IAEA-359 cabbage references standard materials and the results show good agreement with certified or literature values within {+-}0.01% to {+-}0.87%. - Highlights: Black-Right-Pointing-Pointer Application of neutron activation analysis. Black-Right-Pointing-Pointer Multi-trace elemental determination of six medicinal plants in northern Nigeria. Black-Right-Pointing-Pointer Accuracy of the measurements was based on analyzing IAEA-359 cabbage, a standard reference material. Black-Right-Pointing-Pointer Results showed good agreement with certified values within {+-}0.01 % to {+-}0.87%.

  4. Monitoring programmed cell death of living plant tissues in microfluidics using electrochemical and optical techniques

    DEFF Research Database (Denmark)

    Mark, Christina; Heiskanen, Arto; Svensson, Birte

    Programmed cell death (PCD) in plants can influence the outcome of yield and quality of crops through its important role in seed germination and the defence process against pathogens. The main scope of the project is to apply microfluidic cell culture for the measurement of electrochemically or o...

  5. Evaluating the impact of an ammonia-based post-combustion CO2 capture process on a steam power plant with different cooling water temperatures

    DEFF Research Database (Denmark)

    Linnenberg, Sebastian; Darde, Victor Camille Alfred; Oexmann, Jochen

    2012-01-01

    The use of aqueous ammonia is a promising option to capture carbon dioxide from the flue gas of coal-fired power plants. Compared to a capture process using monoethanolamine (MEA), the use of ammonia can reduce the heat requirement of the CO2 desorption significantly, although an additional effort...... is necessary to provide the cooling of the process. To allow for a fair evaluation of the integration of this CO2 capture process into a power plant process, an overall process evaluation is carried out. The use of detailed models of the power plant, of the compressor and of the CO2 capture process enables....... Additionally, two different process configurations of the capture plant, with either one single absorber or two absorbers connected in series where the first absorber captures the majority of the CO2 and the second limits the NH3 slip, are evaluated.The influence of the main process parameters (desorber...