Radiotherapy facilities: Master planning and concept design considerations

International Nuclear Information System (INIS)

2014-01-01

This publication provides guidelines on how to plan a radiotherapy facility in terms of the strategic master planning process including the legal, technical and infrastructure requirements. It outlines a risk assessment methodology, a typical project work plan and describes the professional expertise required for the implementation of such a project. Generic templates for a block design are suggested, which include possibilities for future expansion. These templates can be overlaid onto the designated site such that the most efficient workflow between the main functional areas can be ensured. A sample checklist is attached to act as a guideline for project management and to indicate the critical stages in the process where technical expert assistance may be needed. The publication is aimed at professionals and administrators involved in infrastructure development, planning and facility management, as well as engineers, building contractors and radiotherapy professionals

Planning for design quality

International Nuclear Information System (INIS)

Marguglio, B.W.

1977-01-01

In the nuclear industry and in other high technology industries in which the Government serves as either a customer or a regulator, it is almost always required that the contractor prepare a Quality Program Plan sometimes also referred to as a Quality Program Index. Often, the Quality Program Plan is included as part of the contractor's proposal in response to the Government's or a prime contractor's Request for Proposal. At this stage, the Quality Program Plan serves to demonstrate to the prospective customer the availability of the various quality systems. It provides the customer with a commitment as to the use of these quality systems, thus giving greater assurance that the customer's overall quality and design requirements can be met. The Quality Program Plan is contributing to the salability of the proposal. 1 ref

Waste Encapsulation and Storage Facility (WESF) Design Reconstitution Plan

International Nuclear Information System (INIS)

HERNANDEZ, R.

1999-01-01

The purpose of Design Reconstitution is to establish a Design Baseline appropriate to the current facility mission. The scope of this plan is to ensure that Systems, Structures and Components (SSC) identified in the WESF Basis for Interim Operation (HNF-SDWM-BIO-002) are adequately described and documented, in order to support facility operations. In addition the plan addresses the adequacy of selected Design Topics which are also crucial for support of the facility Basis for Interim Operation (BIO)

Global floor planning approach for VLSI design

International Nuclear Information System (INIS)

LaPotin, D.P.

1986-01-01

Within a hierarchical design environment, initial decisions regarding the partitioning and choice of module attributes greatly impact the quality of the resulting IC in terms of area and electrical performance. This dissertation presents a global floor-planning approach which allows designers to quickly explore layout issues during the initial stages of the IC design process. In contrast to previous efforts, which address the floor-planning problem from a strict module placement point of view, this approach considers floor-planning from an area planning point of view. The approach is based upon a combined min-cut and slicing paradigm, which ensures routability. To provide flexibility, modules may be specified as having a number of possible dimensions and orientations, and I/O pads as well as layout constraints are considered. A slicing-tree representation is employed, upon which a sequence of traversal operations are applied in order to obtain an area efficient layout. An in-place partitioning technique, which provides an improvement over previous min-cut and slicing-based efforts, is discussed. Global routing and module I/O pin assignment are provided for floor-plan evaluation purposes. A computer program, called Mason, has been developed which efficiently implements the approach and provides an interactive environment for designers to perform floor-planning. Performance of this program is illustrated via several industrial examples

Interactive urban design using integrated planning requirements control

NARCIS (Netherlands)

Vries, de B.; Tabak, V.; Achten, H.H.

2005-01-01

Urban planning and urban design are separated disciplines. As a consequence, there is hardly any feedback from the urban design process to the urban planning process. To improve interaction between these two, an interactive urban design (IUD) tool has been developed. The tool is implemented in a

Complete self-sufficiency planning: designing and building disaster-ready hospitals.

Science.gov (United States)

Brands, Chad K; Hernandez, Raquel G; Stenberg, Arnold; Carnes, Gary; Ellen, Jonathan; Epstein, Michael; Strouse, Timothy

2013-01-01

The need for healthcare systems and academic medical centers to be optimally prepared in the event of a disaster is well documented. Events such as Hurricane Katrina demonstrate a major gap in disaster preparedness for at-risk medical institutions. To address this gap, we outline the components of complete self-sufficiency planning in designing and building hospitals that will function at full operational capacity in the event of a disaster. We review the processes used and outcomes achieved in building a new critical access, freestanding children's hospital in Florida. Given that hurricanes are the most frequently occurring natural disaster in Florida, the executive leadership of our hospital determined that we should be prepared for worst-case scenarios in the design and construction of a new hospital. A comprehensive vulnerability assessment was performed. A building planning process that engaged all of the stakeholders was used during the planning and design phases. Subsequent executive-level review and discussions determined that a disaster would require the services of a fully functional hospital. Lessons learned from our own institution's previous experiences and those of medical centers involved in the Hurricane Katrina disaster were informative and incorporated into an innovative set of hospital design elements used for construction of a new hospital with full operational capacity in a disaster. A freestanding children's hospital was constructed using a new framework for disaster planning and preparedness that we have termed complete self-sufficiency planning. We propose the use of complete self-sufficiency planning as a best practice for disaster preparedness in the design and construction of new hospital facilities.

Interior design. Mastering the master plan.

Science.gov (United States)

Mesbah, C E

1995-10-01

Reflecting on the results of the survey, this proposed interior design master planning process addresses the concerns and issues of both CEOs and facility managers in ways that focus on problem-solving strategies and methods. Use of the interior design master plan process further promotes the goals and outcomes expressed in the survey by both groups. These include enhanced facility image, the efficient selection of finishes and furnishings, continuity despite staff changes, and overall savings in both costs and time. The interior design master plan allows administrators and facility managers to anticipate changes resulting from the restructuring of health care delivery. The administrators and facility managers are then able to respond in ways that manage those changes in the flexible and cost-effective manner they are striving for. This framework permits staff members to concentrate their time and energy on the care of their patients--which is, after all, what it's all about.

Bicycle-friendly infrastructure planning in Beijing and Copenhagen - between adapting design solutions and learning local planning cultures

DEFF Research Database (Denmark)

Zhao, Chunli; Carstensen, Trine Agervig; Nielsen, Thomas Alexander Sick

2018-01-01

Abstract Cities around the world are constructing bicycle infrastructure to increase cycling. However, identifying efficient design solutions and determining how bicycle infrastructure planning knowledge can be integrated into comprehensive policy remains a challenge. The objective of this paper...... is to shed light on the strengths and weaknesses of current bicycle infrastructure planning in both an experienced city, Copenhagen, and in a less experienced city, Beijing. The paper examines how local design solutions are identified, how efficient they are and to what extent bicycle infrastructure planning...

Software for CATV Design and Frequency Plan Optimization

OpenAIRE

Hala, O.

2007-01-01

The paper deals with the structure of a software medium used for design and sub-optimization of frequency plan in CATV networks, their description and design method. The software performance is described and a simple design example of energy balance of a simplified CATV network is given. The software was created in programming environment called Delphi and local optimization was made in Matlab.

Arctic pipeline planning design, construction, and equipment

CERN Document Server

Singh, Ramesh

2013-01-01

Utilize the most recent developments to combat challenges such as ice mechanics. The perfect companion for engineers wishing to learn state-of-the-art methods or further develop their knowledge of best practice techniques, Arctic Pipeline Planning provides a working knowledge of the technology and techniques for laying pipelines in the coldest regions of the world. Arctic Pipeline Planning provides must-have elements that can be utilized through all phases of arctic pipeline planning and construction. This includes information on how to: Solve challenges in designing arctic pipelines Protect pipelines from everyday threats such as ice gouging and permafrost Maintain safety and communication for construction workers while supporting typical codes and standards Covers such issues as land survey, trenching or above ground, environmental impact of construction Provides on-site problem-solving techniques utilized through all phases of arctic pipeline planning and construction Is packed with easy-to-read and under...

Planning as situated design

DEFF Research Database (Denmark)

Axel, Erik

It is common to associate situated activity with concrete, craftlike or manual activity here and now and to reserve theoretical and abstract thinking for activities like theoretical experimentation and systematic planning. Much work has gone into demonstrating that these activities are concrete...... and situated, too. In this presentation it will be argued that the investigation of systematic planning as conflictual cooperation will help us see that situated activity is not only based on the present conditions, but also relates them to events spread out in time and space, thereby opening up for another...... understanding of theoretical thinking. Some material from the empirical research project developed with Klaus Nielsen on the design and engineering of a house will be presented. On this basis a conception of planning will be unfolded. It will be understood differently from the way it is understood...

Software for CATV Design and Frequency Plan Optimization

Directory of Open Access Journals (Sweden)

O. Hala

2007-09-01

Full Text Available The paper deals with the structure of a software medium used for design and sub-optimization of frequency plan in CATV networks, their description and design method. The software performance is described and a simple design example of energy balance of a simplified CATV network is given. The software was created in programming environment called Delphi and local optimization was made in Matlab.

MDOT implementation plan for GPS technology in planning, design, and construction delivery

Science.gov (United States)

2010-09-13

Global Positioning System (GPS) technology offers advantages to transportation agencies in the planning, design and construction stages of project delivery. This research study will develop a guide for Mississippi Department of Transportation (MDOT) ...

Planning and design considerations in karst terrain

Science.gov (United States)

Fischer, J. A.; Greene, R. W.; Ottoson, R. S.; Graham, T. C.

1988-10-01

This article discusses the various steps that the authors feel are necessary to the successful progression of an engineered project sited in karst terrain. The procedures require a multidisciplined approach with liaison and cooperation among the various parties to the project. Initially, the prospective owner must have sufficient understanding of the potential engineering problems to incorporate the engineering geologist into the early stages of any planned acquisition. The first step in an investigation should include a review of the available geologic information, aerial photo interpretation, consultation with the State Geological Survey, and a geologic reconnaissance of the prospective site and surrounding area. A go-no-go decision as to purchase can often been made at an early time. Although, in some instances, more study is needed for a particularly intriguing property. The second stage should consider the various planning alternatives that are feasible based upon the limited available information. At this stage planning/purchase decisions can be made as to purchasing options, value of the property, design constraints, and the possible economic penalties that could be associated with the potential site construction. Various planning and construction alternatives should be considered in this phase of the work. The third stage should include a site investigation program of moderate size, consisting of test pits and/or exploratory borings. The borings should be drilled using water as the drilling fluid, with an experienced crew and qualified technical inspection. The authors find the use of geophysical techniques can be extremely misleading unless used in conjunction with exploratory drilling. Successful evaluations using geophysical procedures occur only under ideal conditions. The geotechnical viability of the plan and preliminary design should be investigated in the fourth phase. Additionally, the physical parameters required for the design of structures

Urban Planning and Management Information Systems Analysis and Design Based on GIS

Science.gov (United States)

Xin, Wang

Based on the analysis of existing relevant systems on the basis of inadequate, after a detailed investigation and research, urban planning and management information system will be designed for three-tier structure system, under the LAN using C/S mode architecture. Related functions for the system designed in accordance with the requirements of the architecture design of the functional relationships between the modules. Analysis of the relevant interface and design, data storage solutions proposed. The design for small and medium urban planning information system provides a viable building program.

Hanford Site waste tank farm facilities design reconstitution program plan

International Nuclear Information System (INIS)

Vollert, F.R.

1994-01-01

Throughout the commercial nuclear industry the lack of design reconstitution programs prior to the mid 1980's has resulted in inadequate documentation to support operating facilities configuration changes or safety evaluations. As a result, many utilities have completed or have ongoing design reconstitution programs and have discovered that without sufficient pre-planning their program can be potentially very expensive and may result in end-products inconsistent with the facility needs or expectations. A design reconstitution program plan is developed here for the Hanford waste tank farms facility as a consequence of the DOE Standard on operational configuration management. This design reconstitution plan provides for the recovery or regeneration of design requirements and basis, the compilation of Design Information Summaries, and a methodology to disposition items open for regeneration that were discovered during the development of Design Information Summaries. Implementation of this plan will culminate in an end-product of about 30 Design Information Summary documents. These documents will be developed to identify tank farms facility design requirements and design bases and thereby capture the technical baselines of the facility. This plan identifies the methodology necessary to systematically recover documents that are sources of design input information, and to evaluate and disposition open items or regeneration items discovered during the development of the Design Information Summaries or during the verification and validation processes. These development activities will be governed and implemented by three procedures and a guide that are to be developed as an outgrowth of this plan

105-KE Basin Pilot Run design plan

International Nuclear Information System (INIS)

Sherrell, D.L.

1994-01-01

This document identifies all design deliverables and procedures applicable to the 105-KE Basin Pilot Run. It also establishes a general design strategy, defines interface control requirements, and covers planning for mechanical, electrical, instrument/control system, and equipment installation design

Design and planning of the Henderson Mine ventilation upgrade project

Energy Technology Data Exchange (ETDEWEB)

Loring, D.M.; Shea, N.A. [Climax Molybdenum Co., Henderson Operations, Empire, CO (United States)

2010-07-01

The average molybdenum ore throughput at the Henderson Mine near Denver, Colorado increased significantly between 2003 and 2007. In response, the Climax Molybdenum Company updated the life-of-mine plan which resulted in significant changes to the ventilation requirements of the mine. This paper outlined the mine and ventilation planning efforts. The design options that were evaluated to upgrade the ventilation system were also described along with the final design that was chosen to support the updated mine plan. The mine uses an exhaust ventilation system in which ventilation is supplied through a service shaft, an intake shaft and a long ore haulage tunnel. Currently, air is exhausted through 2 exhaust shafts. The new reserve model that was completed in 2007 incorporated updated geologic information and mix/dilution models. An evaluation of the new life-of-mine plans and production sequences drove the development of a new ventilation plan that increased the airflow requirements of the mine. The primary design concerns were radon control; reduction of diesel particulate matter; silica dust; blasting and other gases; and climate control. Ventilation requirements were also updated based on the final exposure limits stipulated in the 2008 regulations of the Mine Safety and Health Administration. 4 refs., 11 tabs., 8 figs.

NRC Seismic Design Margins Program Plan

International Nuclear Information System (INIS)

Cummings, G.E.; Johnson, J.J.; Budnitz, R.J.

1985-08-01

Recent studies estimate that seismically induced core melt comes mainly from earthquakes in the peak ground acceleration range from 2 to 4 times the safe shutdown earthquake (SSE) acceleration used in plant design. However, from the licensing perspective of the US Nuclear Regulatory Commission, there is a continuing need for consideration of the inherent quantitative seismic margins because of, among other things, the changing perceptions of the seismic hazard. This paper discusses a Seismic Design Margins Program Plan, developed under the auspices of the US NRC, that provides the technical basis for assessing the significance of design margins in terms of overall plant safety. The Plan will also identify potential weaknesses that might have to be addressed, and will recommend technical methods for assessing margins at existing plants. For the purposes of this program, a general definition of seismic design margin is expressed in terms of how much larger that the design basis earthquake an earthquake must be to compromise plant safety. In this context, margin needs to be determined at the plant, system/function, structure, and component levels. 14 refs., 1 fig

Radiotherapy Facilities: Master Planning and Concept Design Considerations (Russian Edition)

International Nuclear Information System (INIS)

2015-01-01

This publication provides guidelines on how to plan a radiotherapy facility in terms of the strategic master planning process including the legal, technical and infrastructure requirements. It outlines a risk assessment methodology and a typical project work plan, and describes the professional expertise required for the implementation of such a project. Generic templates for a block design are suggested, which include possibilities for future expansion. These templates can be overlaid onto the designated site such that the most efficient workflow between the main functional areas can be ensured. A sample checklist is attached to act as a guideline for project management and to indicate the critical stages in the process where technical expert assistance may be needed. The publication is aimed at professionals and administrators involved in infrastructure development, planning and facility management, as well as engineers, building contractors and radiotherapy professionals

National Ignition Facility Title II Design Plan

International Nuclear Information System (INIS)

Kumpan, S

1997-01-01

This National Ignition Facility (NIF) Title II Design Plan defines the work to be performed by the NIF Project Team between November 1996, when the U.S. Department of Energy (DOE) reviewed Title I design and authorized the initiation of Title H design and specific long-lead procurements, and September 1998, when Title 11 design will be completed

Design and analysis of advanced flight planning concepts

Science.gov (United States)

Sorensen, John A.

1987-01-01

The objectives of this continuing effort are to develop and evaluate new algorithms and advanced concepts for flight management and flight planning. This includes the minimization of fuel or direct operating costs, the integration of the airborne flight management and ground-based flight planning processes, and the enhancement of future traffic management systems design. Flight management (FMS) concepts are for on-board profile computation and steering of transport aircraft in the vertical plane between a city pair and along a given horizontal path. Flight planning (FPS) concepts are for the pre-flight ground based computation of the three-dimensional reference trajectory that connects the city pair and specifies the horizontal path, fuel load, and weather profiles for initializing the FMS. As part of these objectives, a new computer program called EFPLAN has been developed and utilized to study advanced flight planning concepts. EFPLAN represents an experimental version of an FPS. It has been developed to generate reference flight plans compatible as input to an FMS and to provide various options for flight planning research. This report describes EFPLAN and the associated research conducted in its development.

Family and Consumer Sciences: A Facility Planning and Design Guide for School Systems.

Science.gov (United States)

Maryland State Dept. of Education, Baltimore.

This document presents design concepts and considerations for planning and developing middle and high school family and consumer sciences education facilities. It includes discussions on family and consumer sciences education trends and the facility planning process. Design concepts explore multipurpose laboratories and spaces for food/nutrition…

Conclusion - Sustainable Energy Landscapes: Designing, Planning, and Development

NARCIS (Netherlands)

Stremke, S.; Dobbelsteen, van den A.

2013-01-01

Book abstract: The goal of advancing eco cities often remains confined to political or technological issues. This book establishes a focus on architectural and infrastructural design approaches to sustainable urban planning. Starting out from a critical assessment of five prototypical eco cities of

Ethics, Design and Planning of the Built Environment

NARCIS (Netherlands)

Basta, C.; Moroni, S.

2013-01-01

The book proposes a set of original contributions in research areas shared by planning theory, architectural research, design and ethical inquiry. The contributors gathered in 2010 at the Ethics of the Built Environment seminar organized by the editors at Delft University of Technology. Both

Life-Cycle Finance and the Design of Pension Plans

OpenAIRE

Zvi Bodie; Jérôme Detemple; Marcel Rindisbacher

2009-01-01

This article reviews recent scientific literature on consumer financial decisions over the life cycle, outlining its implications for the design of pension plans. It begins with a review of advances in the theory of rational financial planning and wealth management. It then summarizes the recent empirical literature on the actual behavior of households regarding saving, investing, and insuring their consumption in old age. Finally, it briefly comments on the practical implications of the theo...

Quality planning for major plant design modifications

International Nuclear Information System (INIS)

Dulee, R.J.

1988-01-01

This paper reviews the approach and activities undertaken by Public Service Electric and Gas Company's (PSE and G's) nuclear quality assurance (QA) department to support major plant design modifications conducted during refueling outages at Salem Generating Station. It includes the planning and implementation of quality plans developed to provide both QA and quality control (QC) coverage of modification performed by contracted service organizations

Business System Planning Project, Preliminary System Design

International Nuclear Information System (INIS)

EVOSEVICH, S.

2000-01-01

CH2M HILL Hanford Group, Inc. (CHG) is currently performing many core business functions including, but not limited to, work control, planning, scheduling, cost estimating, procurement, training, and human resources. Other core business functions are managed by or dependent on Project Hanford Management Contractors including, but not limited to, payroll, benefits and pension administration, inventory control, accounts payable, and records management. In addition, CHG has business relationships with its parent company CH2M HILL, U.S. Department of Energy, Office of River Protection and other River Protection Project contractors, government agencies, and vendors. The Business Systems Planning (BSP) Project, under the sponsorship of the CH2M HILL Hanford Group, Inc. Chief Information Officer (CIO), have recommended information system solutions that will support CHG business areas. The Preliminary System Design was developed using the recommendations from the Alternatives Analysis, RPP-6499, Rev 0 and will become the design base for any follow-on implementation projects. The Preliminary System Design will present a high-level system design, providing a high-level overview of the Commercial-Off-The-Shelf (COTS) modules and identify internal and external relationships. This document will not define data structures, user interface components (screens, reports, menus, etc.), business rules or processes. These in-depth activities will be accomplished at implementation planning time

Minimization In Digital Design As A Meta-Planning Problem

Science.gov (United States)

Ho, William P. C.; Wu, Jung-Gen

1987-05-01

In our model-based expert system for automatic digital system design, we formalize the design process into three sub-processes - compiling high-level behavioral specifications into primitive behavioral operations, grouping primitive operations into behavioral functions, and grouping functions into modules. Consideration of design minimization explicitly controls decision-making in the last two subprocesses. Design minimization, a key task in the automatic design of digital systems, is complicated by the high degree of interaction among the time sequence and content of design decisions. In this paper, we present an AI approach which directly addresses these interactions and their consequences by modeling the minimization prob-lem as a planning problem, and the management of design decision-making as a meta-planning problem.

Planning, design and the post-modernity of cities

NARCIS (Netherlands)

Besteliu, I.; Doevendans, C.H.

2002-01-01

This essay draws on the concept of ‘weak thought’ from the writings of the philosopher Gianni Vattimo, and connects it to a weakening of the certitudes of modern urban design and planning. According to Vattimo, modernity does not abruptly end; rather its grounding tenets such as universalised

On Intelligent Design and Planning Method of Process Route Based on Gun Breech Machining Process

Science.gov (United States)

Hongzhi, Zhao; Jian, Zhang

2018-03-01

The paper states an approach of intelligent design and planning of process route based on gun breech machining process, against several problems, such as complex machining process of gun breech, tedious route design and long period of its traditional unmanageable process route. Based on gun breech machining process, intelligent design and planning system of process route are developed by virtue of DEST and VC++. The system includes two functional modules--process route intelligent design and its planning. The process route intelligent design module, through the analysis of gun breech machining process, summarizes breech process knowledge so as to complete the design of knowledge base and inference engine. And then gun breech process route intelligently output. On the basis of intelligent route design module, the final process route is made, edited and managed in the process route planning module.

Planning and design of a knowledge based system for green manufacturing management

Science.gov (United States)

Kamal Mohd Nawawi, Mohd; Mohd Zuki Nik Mohamed, Nik; Shariff Adli Aminuddin, Adam

2013-12-01

This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization.

Planning and design of a knowledge based system for green manufacturing management

International Nuclear Information System (INIS)

Nawawi, Mohd Kamal Mohd; Mohamed, Nik Mohd Zuki Nik; Aminuddin, Adam Shariff Adli

2013-01-01

This paper presents a conceptual design approach to the development of a hybrid Knowledge Based (KB) system for Green Manufacturing Management (GMM) at the planning and design stages. The research concentrates on the GMM by using a hybrid KB system, which is a blend of KB system and Gauging Absences of Pre-requisites (GAP). The hybrid KB/GAP system identifies all potentials elements of green manufacturing management issues throughout the development of this system. The KB system used in the planning and design stages analyses the gap between the existing and the benchmark organizations for an effective implementation through the GAP analysis technique. The proposed KBGMM model at the design stage explores two components, namely Competitive Priority and Lean Environment modules. Through the simulated results, the KBGMM System has identified, for each modules and sub-module, the problem categories in a prioritized manner. The System finalized all the Bad Points (BP) that need to be improved to achieve benchmark implementation of GMM at the design stage. The System provides valuable decision making information for the planning and design a GMM in term of business organization

Station planning and design incorporating modern power system practice

CERN Document Server

Martin, PC

1991-01-01

The planning and design of new power stations can involve complex interaction between the many engineering disciplines involved as well as environmental, planning, economical, political and social pressures. This volume aims to provide a logical review of the procedures involved in power station development. The engineering aspects are outlined in detail, with examples, showing the basis of the relationships involved together with ""non-engineering"" factors so that the engineer can draw on the information provided for specific projects. The civil engineering and building of power stations are

Development of Secondary Route Bridge Design Plan Guides

Science.gov (United States)

2018-03-03

The objective of this study is to develop a set of bridge plan guides for low-volume traffic roads. The purpose of the plans is to facilitate construction of new structures suitable for local agencies. The designs are to specifically address common l...

MDOT implementation plan for global positioning systems (GPS) technology in planning, design, and construction delivery.

Science.gov (United States)

2010-09-13

Global Positioning System (GPS) technology offers advantages to transportation agencies in the planning, design and construction stages of project delivery. This research study will develop a guide for Mississippi Department of Transportation (MDOT) ...

Water NSTF Design, Instrumentation, and Test Planning

Energy Technology Data Exchange (ETDEWEB)

Lisowski, Darius D.; Gerardi, Craig D.; Hu, Rui; Kilsdonk, Dennis J.; Bremer, Nathan C.; Lomperski, Stephen W.; Kraus, Adam R.; Bucknor, Matthew D.; Lv, Qiuping; Farmer, Mitchell T.

2017-08-01

The following report serves as a formal introduction to the water-based Natural convection Shutdown heat removal Test Facility (NSTF) program at Argonne. Since 2005, this US Department of Energy (DOE) sponsored program has conducted large scale experimental testing to generate high-quality and traceable validation data for guiding design decisions of the Reactor Cavity Cooling System (RCCS) concept for advanced reactor designs. The most recent facility iteration, and focus of this report, is the operation of a 1/2 scale model of a water-RCCS concept. Several features of the NSTF prototype align with the conceptual design that has been publicly released for the AREVA 625 MWt SC-HTGR. The design of the NSTF also retains all aspects common to a fundamental boiling water thermosiphon, and thus is well poised to provide necessary experimental data to advance basic understanding of natural circulation phenomena and contribute to computer code validation. Overall, the NSTF program operates to support the DOE vision of aiding US vendors in design choices of future reactor concepts, advancing the maturity of codes for licensing, and ultimately developing safe and reliable reactor technologies. In this report, the top-level program objectives, testing requirements, and unique considerations for the water cooled test assembly are discussed, and presented in sufficient depth to support defining the program’s overall scope and purpose. A discussion of the proposed 6-year testing program is then introduced, which outlines the specific strategy and testing plan for facility operations. The proposed testing plan has been developed to meet the toplevel objective of conducting high-quality test operations that span across a broad range of single- and two-phase operating conditions. Details of characterization, baseline test cases, accident scenario, and parametric variations are provided, including discussions of later-stage test cases that examine the influence of geometric

Incorporating climate change projections into riparian restoration planning and design

Science.gov (United States)

Perry, Laura G.; Reynolds, Lindsay V.; Beechie, Timothy J.; Collins, Mathias J.; Shafroth, Patrick B.

2015-01-01

Climate change and associated changes in streamflow may alter riparian habitats substantially in coming decades. Riparian restoration provides opportunities to respond proactively to projected climate change effects, increase riparian ecosystem resilience to climate change, and simultaneously address effects of both climate change and other human disturbances. However, climate change may alter which restoration methods are most effective and which restoration goals can be achieved. Incorporating climate change into riparian restoration planning and design is critical to long-term restoration of desired community composition and ecosystem services. In this review, we discuss and provide examples of how climate change might be incorporated into restoration planning at the key stages of assessing the project context, establishing restoration goals and design criteria, evaluating design alternatives, and monitoring restoration outcomes. Restoration planners have access to numerous tools to predict future climate, streamflow, and riparian ecology at restoration sites. Planners can use those predictions to assess which species or ecosystem services will be most vulnerable under future conditions, and which sites will be most suitable for restoration. To accommodate future climate and streamflow change, planners may need to adjust methods for planting, invasive species control, channel and floodplain reconstruction, and water management. Given the considerable uncertainty in future climate and streamflow projections, riparian ecological responses, and effects on restoration outcomes, planners will need to consider multiple potential future scenarios, implement a variety of restoration methods, design projects with flexibility to adjust to future conditions, and plan to respond adaptively to unexpected change.

Systematic Methods in School Planning and Design. A Selected and Annotated Bibliography.

Science.gov (United States)

Murtha, D. Michael

A selection of technical reports, journal articles and books on various aspects of systematic methods for school planning and design, are presented in this bibliography. The subject areas include the design process in terms of--(1) practice, (2) theory, (3) methods, (4) decision systems, and (5) computer applications. Criteria for design with…

Integrating operation design into infrastructure planning to foster robustness of planned water systems

Science.gov (United States)

Bertoni, Federica; Giuliani, Matteo; Castelletti, Andrea

2017-04-01

Over the past years, many studies have looked at the planning and management of water infrastructure systems as two separate problems, where the dynamic component (i.e., operations) is considered only after the static problem (i.e., planning) has been resolved. Most recent works have started to investigate planning and management as two strictly interconnected faces of the same problem, where the former is solved jointly with the latter in an integrated framework. This brings advantages to multi-purpose water reservoir systems, where several optimal operating strategies exist and similar system designs might perform differently on the long term depending on the considered short-term operating tradeoff. An operationally robust design will be therefore one performing well across multiple feasible tradeoff operating policies. This work aims at studying the interaction between short-term operating strategies and their impacts on long-term structural decisions, when long-lived infrastructures with complex ecological impacts and multi-sectoral demands to satisfy (i.e., reservoirs) are considered. A parametric reinforcement learning approach is adopted for nesting optimization and control yielding to both optimal reservoir design and optimal operational policies for water reservoir systems. The method is demonstrated on a synthetic reservoir that must be designed and operated for ensuring reliable water supply to downstream users. At first, the optimal design capacity derived is compared with the 'no-fail storage' computed through Rippl, a capacity design function that returns the minimum storage needed to satisfy specified water demands without allowing supply shortfall. Then, the optimal reservoir volume is used to simulate the simplified case study under other operating objectives than water supply, in order to assess whether and how the system performance changes. The more robust the infrastructural design, the smaller the difference between the performances of

Constructing a modern cytology laboratory: A toolkit for planning and design.

Science.gov (United States)

Roberson, Janie; Wrenn, Allison; Poole, John; Jaeger, Andrew; Eltoum, Isam A

2013-01-01

Constructing or renovating a laboratory can be both challenging and rewarding. UAB Cytology (UAB CY) recently undertook a project to relocate from a building constructed in 1928 to new space. UAB CY is part of an academic center that provides service to a large set of patients, support training of one cytotechnology program and one cytopathology fellowship training program and involve actively in research and scholarly activity. Our objectives were to provide a safe, aesthetically pleasing space and gain efficiencies through lean processes. The phases of any laboratory design project are Planning, Schematic Design (SD), Design Development (DD), Construction Documents (CD) and Construction. Lab personnel are most critical in the Planning phase. During this time stakeholders, relationships, budget, square footage and equipment were identified. Equipment lists, including what would be relocated, purchased new and projected for future growth ensure that utilities were matched to expected need. A chemical inventory was prepared and adequate storage space was planned. Regulatory and safety requirements were discussed. Tours and high level process flow diagrams helped architects and engineers understand the laboratory daily work. Future needs were addressed through a questionnaire which identified potential areas of growth and technological change. Throughout the project, decisions were driven by data from the planning phase. During the SD phase, objective information from the first phase was used by architects and planners to create a general floor plan. This was the basis of a series of meetings to brainstorm and suggest modifications. DD brings more detail to the plans with engineering, casework, equipment specifics, finishes. Design changes should be completed at this phase. The next phase, CD took the project from the lab purview into purely technical mode. Construction documents were used by the contractor for the bidding process and ultimately the Construction

Robotic needle steering: design, modeling, planning, and image guidance

NARCIS (Netherlands)

Cowan, Noah J.; Goldberg, Ken; Chirikjian, Gregory S.; Fichtinger, Gabor; Alterovitz, Ron; Reed, Kyle B.; Kallem, Vinutha; Misra, Sarthak; Park, Wooram; Okamura, Allison M.; Rosen, Jacob; Hannaford, Blake; Satava, Richard M.

2010-01-01

This chapter describes how advances in needle design, modeling, planning, and image guidance make it possible to steer flexible needles from outside the body to reach specified anatomical targets not accessible using traditional needle insertion methods. Steering can be achieved using a variety of

SCHOOLS OF PRESTRESSED CONCRETE. PLANNING, DESIGN AND CONSTRUCTION OF EDUCATIONAL FACILITIES FOR SCHOOLS AND COLLEGES.

Science.gov (United States)

LYMAN, ROBERT J.

THE USE OF PRESTRESSED CONCRETE IS EMPHASIZED IN THE AREAS OF SCHOOL PLANNING, DESIGN, AND CONSTRUCTION. THE PLANNING SECTION INCLUDES--(1) ROLES OF ACTIVE PARTIES AND RELATED ORGANIZATIONS, (2) PROCEDURES, AND (3) CONCEPTUAL DATA FOR SITE AND BUILDING. THE DESIGN SECTION CONTAINS--(1) DEVELOPMENT OF CONSTRUCTION SYSTEMS, (2) INTEGRATION OF…

Design, Results and Plans for Power Beaming Competitive Challenge

International Nuclear Information System (INIS)

Shelef, Ben

2008-01-01

In our context, Power Beaming refers to the extraction of useable electrical power from a directed electromagnetic beam. In order to promote interest in this technology, the Spaceward Foundation proposed and is managing a technology prize challenge based on a Space Elevator design scenario. The challenge has a prize purse of $2M, provided by NASA's Centennial Challenges office. This paper covers the considerations that went into the design of the challenge, a brief chronology of past results, and plans for the future

Reliability-Based Design and Planning of Inspection and Monitoring of Offshore Wind Turbines

DEFF Research Database (Denmark)

Marquez-Dominguez, Sergio

Maintaining and developing a sustainable wind industry is the main motivation of this PhD thesis entitled “Reliability-based design and planning of inspection and monitoring of offshore wind turbines”. In this thesis, statistical methods and probability theory are important mathematical tools used...... and offshore wind turbine foundations with the aim of improving the design, decreasing structural costs and increasing benefits. Recently, wind energy technology has started to adopt risk and reliability based inspection planning (RBI) as a methodology based on Bayesian decision theories together...

Conceptual Design Plan SM-43 Replacement Project

Energy Technology Data Exchange (ETDEWEB)

University of California, Los Alamos National Laboratory, SCC Project Office

2000-11-01

The Los Alamos National Laboratory Conceptual Design Plan for the SM-43 Replacement Project outlines plans for replacing the SM-43 Administration Building. Topics include the reasons that replacement is considered a necessity; the roles of the various project sponsors; and descriptions of the proposed site and facilities. Also covered in this proposal is preliminary information on the project schedule, cost estimates, acquisition strategy, risk assessment, NEPA strategy, safety strategy, and safeguards and security. Spreadsheets provide further detail on space requirements, project schedules, and cost estimates.

Constructing a modern cytology laboratory: A toolkit for planning and design

Directory of Open Access Journals (Sweden)

Janie Roberson

2013-01-01

Full Text Available Introduction: Constructing or renovating a laboratory can be both challenging and rewarding. UAB Cytology (UAB CY recently undertook a project to relocate from a building constructed in 1928 to new space. UAB CY is part of an academic center that provides service to a large set of patients, support training of one cytotechnology program and one cytopathology fellowship training program and involve actively in research and scholarly activity. Our objectives were to provide a safe, aesthetically pleasing space and gain efficiencies through lean processes. Methods: The phases of any laboratory design project are Planning, Schematic Design (SD, Design Development (DD, Construction Documents (CD and Construction. Lab personnel are most critical in the Planning phase. During this time stakeholders, relationships, budget, square footage and equipment were identified. Equipment lists, including what would be relocated, purchased new and projected for future growth ensure that utilities were matched to expected need. A chemical inventory was prepared and adequate storage space was planned. Regulatory and safety requirements were discussed. Tours and high level process flow diagrams helped architects and engineers understand the laboratory daily work. Future needs were addressed through a questionnaire which identified potential areas of growth and technological change. Throughout the project, decisions were driven by data from the planning phase. During the SD phase, objective information from the first phase was used by architects and planners to create a general floor plan. This was the basis of a series of meetings to brainstorm and suggest modifications. DD brings more detail to the plans with engineering, casework, equipment specifics, finishes. Design changes should be completed at this phase. The next phase, CD took the project from the lab purview into purely technical mode. Construction documents were used by the contractor for the bidding

Toward a Research and Action Agenda on Urban Planning/Design and Health Equity in Cities in Low and Middle-Income Countries

OpenAIRE

Smit, Warren; Hancock, Trevor; Kumaresen, Jacob; Santos-Burgoa, Carlos; Sánchez-Kobashi Meneses, Raúl; Friel, Sharon

2011-01-01

The importance of reestablishing the link between urban planning and public health has been recognized in recent decades; this paper focuses on the relationship between urban planning/design and health equity, especially in cities in low and middle-income countries (LMICs). The physical urban environment can be shaped through various planning and design processes including urban planning, urban design, landscape architecture, infrastructure design, architecture, and transport planning. The re...

Improvisation Planning and Jam Session Design using concepts of Sequence Variation and Flow Experience

OpenAIRE

Dubnov , Shlomo; Assayag , Gérard

2005-01-01

cote interne IRCAM: Assayag05a; National audience; We describe a model for improvisation design based on Factor Oracle automation, which is extended to perform learning and analysis of incoming sequences in terms of sequence variation parameters, namely replication, recombination and innovation. These parameters describe the improvisation plan and allow the design of new improvisations or analysis and modification of plans of existing improvisations. We further introduce an idea of flow exper...

School Counselor Lead Initial Individual Career and Academic Plan Implementation Design

Science.gov (United States)

Moeder-Chandler, Markus

2017-01-01

In Fall of 2014 for Fountain-Fort Carson School District #8 undertook a revamping of graduation and state-mandated ICAP requirements for implementation for the graduating class of 2021. This design and implementation process included numerous stakeholders and several years of planning from Fall of 2014 to Spring of 2017. The design and…

Optimal design and planning of glycerol-based biorefinery supply chains under uncertainty

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Carvalho, Ana; Gernaey, Krist V.

2017-01-01

-echelon mixed integer linear programming problem is proposed based upon a previous model, GlyThink. In the new formulation, market uncertainties are taken into account at the strategic planning level. The robustness of the supply chain structures is analyzed based on statistical data provided...... by the implementation of the Monte Carlo method, where a deterministic optimization problem is solved for each scenario. Furthermore, the solution of the stochastic multi-objective optimization model, points to the Pareto set of trade-off solutions obtained when maximizing the NPV and minimizing environmental......The optimal design and planning of glycerol-based biorefinery supply chains is critical for the development and implementation of this concept in a sustainable manner. To achieve this, a decision-making framework is proposed in this work, to holistically optimize the design and planning...

Planning Coverage Campaigns for Mission Design and Analysis: CLASP for DESDynl

Science.gov (United States)

Knight, Russell L.; McLaren, David A.; Hu, Steven

2013-01-01

Mission design and analysis presents challenges in that almost all variables are in constant flux, yet the goal is to achieve an acceptable level of performance against a concept of operations, which might also be in flux. To increase responsiveness, automated planning tools are used that allow for the continual modification of spacecraft, ground system, staffing, and concept of operations, while returning metrics that are important to mission evaluation, such as area covered, peak memory usage, and peak data throughput. This approach was applied to the DESDynl mission design using the CLASP planning system, but since this adaptation, many techniques have changed under the hood for CLASP, and the DESDynl mission concept has undergone drastic changes. The software produces mission evaluation products, such as memory highwater marks, coverage percentages, given a mission design in the form of coverage targets, concept of operations, spacecraft parameters, and orbital parameters. It tries to overcome the lack of fidelity and timeliness of mission requirements coverage analysis during mission design. Previous techniques primarily use Excel in ad hoc fashion to approximate key factors in mission performance, often falling victim to overgeneralizations necessary in such an adaptation. The new program allows designers to faithfully represent their mission designs quickly, and get more accurate results just as quickly.

Initial research on planning and design of today's Buddhist temple

Institute of Scientific and Technical Information of China (English)

Xinjian LI; Guangya ZHU

2008-01-01

Starting from the reconstruction planning for the Chongyuan Temple in Suzhou Industrial Park, the planners explored the elements of contemporary Buddhism architecture planning and design in terms of the social multi-requirement, environmental utilization fitted for a given time and place, appropriate temple pat-tern on specification and institution, functional division for harmonic relationship between monks and laymen, etc. For realization of historic mission: carrying forward the cultural tradition and constructing harmonic society, this paper proposes some principles of creation, which have historical evidence and are keeping pace with the times.

System Design and Implementation of Intelligent Fire Engine Path Planning based on SAT Algorithm

Institute of Scientific and Technical Information of China (English)

CAI Li-sha[1; ZENG Wei-peng[1; HAN Bao-ru[1

2016-01-01

In this paper, in order to make intelligent fi re car complete autonomy path planning in simulation map. Proposed system design of intelligent fi re car path planning based on SAT. The system includes a planning module, a communication module, a control module. Control module via the communication module upload the initial state and the goal state to planning module. Planning module solve this planning solution,and then download planning solution to control module, control the movement of the car fi re. Experiments show this the system is tracking short time, higher planning effi ciency.

Ethics, design and planning of the built environment

CERN Document Server

Moroni, Stefano

2013-01-01

The book proposes a set of original contributions in research areas shared by planning theory, architectural research, design and ethical inquiry. The contributors gathered in 2010 at the Ethics of the Built Environment seminar organized by the editors at Delft University of Technology. Both prominent and emerging scholars presented their researches in the areas of aesthetics, technological risks, planning theory and architecture. The scope of the seminar was highlighting shared lines of ethical inquiry among the themes discussed, in order to identify perspectives of innovative interdisciplinary research. After the seminar all seminar participants have elaborated their proposed contributions. Some of the most prominent international authors in the field were subsequently invited to join in with this inquiry. Claudia Basta teaches "Network Infrastructures and Mobility" at Wageningen University. Between 2009 and 2011 she worked as Coordinator of the 3TU Centre of Excellence for Ethics and Technology of Delft Un...

41 CFR 102-76.20 - What issues must Federal agencies consider in providing site planning and landscape design services?

Science.gov (United States)

2010-07-01

... agencies consider in providing site planning and landscape design services? 102-76.20 Section 102-76.20... What issues must Federal agencies consider in providing site planning and landscape design services? In providing site planning and design services, Federal agencies must— (a) Make the site planning and landscape...

Dynamic Supply Chain Design and Operations Plan for Connected Smart Factories with Additive Manufacturing

Directory of Open Access Journals (Sweden)

Byung Do Chung

2018-04-01

Full Text Available Interest in smart factories and smart supply chains has been increasing, and researchers have emphasized the importance and the effects of advanced technologies such as 3D printers, the Internet of Things, and cloud services. This paper considers an innovation in dynamic supply-chain design and operations: connected smart factories that share interchangeable processes through a cloud-based system for personalized production. In the system, customers are able to upload a product design file, an optimal supply chain design and operations plan are then determined based on the available resources in the network of smart factories. The concept of smart supply chains is discussed and six types of flexibilities are identified, namely: design flexibility, product flexibility, process flexibility, supply chain flexibility, collaboration flexibility, and strategic flexibility. Focusing on supply chain flexibility, a general planning framework and various optimization models for dynamic supply chain design and operations plan are proposed. Further, numerical experiments are conducted to analyze fixed, production, and transportation costs for various scenarios. The results demonstrate the extent of the dynamic supply chain design and operations problem, and the large variation in transportation cost.

Integral stormwater management master plan and design in an ecological community.

Science.gov (United States)

Che, Wu; Zhao, Yang; Yang, Zheng; Li, Junqi; Shi, Man

2014-09-01

Urban stormwater runoff nearly discharges directly into bodies of water through gray infrastructure in China, such as sewers, impermeable ditches, and pump stations. As urban flooding, water shortage, and other environment problems become serious, integrated water environment management is becoming increasingly complex and challenging. At more than 200ha, the Oriental Sun City community is a large retirement community located in the eastern side of Beijing. During the beginning of its construction, the project faced a series of serious water environment crises such as eutrophication, flood risk, water shortage, and high maintenance costs. To address these issues, an integral stormwater management master plan was developed based on the concept of low impact development (LID). A large number of LID and green stormwater infrastructure (GSI) approaches were designed and applied in the community to replace traditional stormwater drainage systems completely. These approaches mainly included bioretention (which captured nearly 85th percentile volume of the annual runoff in the site, nearly 5.4×10(5)m(3) annually), swales (which functioned as a substitute for traditional stormwater pipes), waterscapes, and stormwater wetlands. Finally, a stormwater system plan was proposed by integrating with the gray water system, landscape planning, an architectural master plan, and related consultations that supported the entire construction period. After more than 10 years of planning, designing, construction, and operation, Oriental Sun City has become one of the earliest modern large-scale LID communities in China. Moreover, the project not only addressed the crisis efficiently and effectively, but also yielded economic and ecological benefits. Copyright © 2014. Published by Elsevier B.V.

Field Investigation Plan for 1301-N and 1325-N Facilities Sampling to Support Remedial Design

International Nuclear Information System (INIS)

Weiss, S. G.

1998-01-01

This field investigation plan (FIP) provides for the sampling and analysis activities supporting the remedial design planning for the planned removal action for the 1301-N and 1325-N Liquid Waste Disposal Facilities (LWDFs), which are treatment, storage,and disposal (TSD) units (cribs/trenches). The planned removal action involves excavation, transportation, and disposal of contaminated material at the Environmental Restoration Disposal Facility (ERDF).An engineering study (BHI 1997) was performed to develop and evaluate various options that are predominantly influenced by the volume of high- and low-activity contaminated soil requiring removal. The study recommended that additional sampling be performed to supplement historical data for use in the remedial design

Flexibility in flood management design: proactive planning under uncertainty

Science.gov (United States)

Smet, K.; de Neufville, R.; van der Vlist, M.

2016-12-01

This paper presents a value-enhancing approach for proactive planning and design of long-lived flood management infrastructure given uncertain future flooding threats. Designing infrastructure that can be adapted over time is a method to safeguard the efficacy of current design decisions given future uncertainties. We explore the value of embedding "options" in a physical structure, where an option is the right but not the obligation to do something at a later date (e.g. over-dimensioning a floodwall foundation now facilitates a future height addition in response to observed increases in sea level; building extra pump bays in a drainage pumping station enables the easy addition of pumping capacity whenever increased precipitation warrants an expansion.) The proposed approach couples a simulation model that captures future climate induced changes to the hydrologic operating environment of a structure, with an economic model that estimates the lifetime economic performance of alternative investment strategies. The economic model uses Real "In" Options analysis, a type of cash flow analysis that quantifies the implicit value of options and the flexibility they provide. We demonstrate the approach using replacement planning for the multi-functional pumping station IJmuiden on the North Sea Canal in the Netherlands. The analysis models flexibility in design decisions, varying the size and specific options included in the new structure. Results indicate that the incorporation of options within the structural design has the potential to improve its economic performance, as compared to more traditional, "build it once and build it big" designs where flexibility is not an explicit design criterion. The added value resulting from the incorporation of flexibility varies with the range of future conditions considered, and the specific options examined. This approach could be applied to explore investment strategies for the design of other flood management structures, as well

Guidelines for the integrated planning and design of underground coal mines.

CSIR Research Space (South Africa)

Fourie, GA

2001-11-01

Full Text Available Mine planning and design involves the compilation and integration of all relevant geological, geotechnical, mining, engineering and economic data into a single document to define and describe the exploitation strategy for a particular mineral...

Toward a research and action agenda on urban planning/design and health equity in cities in low and middle-income countries.

Science.gov (United States)

Smit, Warren; Hancock, Trevor; Kumaresen, Jacob; Santos-Burgoa, Carlos; Sánchez-Kobashi Meneses, Raúl; Friel, Sharon

2011-10-01

The importance of reestablishing the link between urban planning and public health has been recognized in recent decades; this paper focuses on the relationship between urban planning/design and health equity, especially in cities in low and middle-income countries (LMICs). The physical urban environment can be shaped through various planning and design processes including urban planning, urban design, landscape architecture, infrastructure design, architecture, and transport planning. The resultant urban environment has important impacts on the health of the people who live and work there. Urban planning and design processes can also affect health equity through shaping the extent to which the physical urban environments of different parts of cities facilitate the availability of adequate housing and basic infrastructure, equitable access to the other benefits of urban life, a safe living environment, a healthy natural environment, food security and healthy nutrition, and an urban environment conducive to outdoor physical activity. A new research and action agenda for the urban environment and health equity in LMICs should consist of four main components. We need to better understand intra-urban health inequities in LMICs; we need to better understand how changes in the built environment in LMICs affect health equity; we need to explore ways of successfully planning, designing, and implementing improved health/health equity; and we need to develop evidence-based recommendations for healthy urban planning/design in LMICs.

LASL experimental engineered waste burial facility: design considerations and preliminary plan

International Nuclear Information System (INIS)

DePoorter, G.L.

1980-01-01

The LASL Experimental Engineered Waste Burial Facility is a part of the National Low-Level Waste Management Program on Shallow-Land Burial Technology. It is a test facility where basic information can be obtained on the processes that occur in shallow-land burial operations and where new concepts for shallow-land burial can be tested on an accelerated basis on an appropriate scale. The purpose of this paper is to present some of the factors considered in the design of the facility and to present a preliminary description of the experiments that are initially planned. This will be done by discussing waste management philosophies, the purposes of the facility in the context of the waste management philosophy for the facility, and the design considerations, and by describing the experiments initially planned for inclusion in the facility, and the facility site

A Novel CAPP System Based on SML for Variant Design of Process Planning

Institute of Scientific and Technical Information of China (English)

ZHAO Haibin; WANG Junying; ZHANG Min

2006-01-01

The production model of "multi-specification and low-quantity" is becoming the main trend of manufacturing industry. As a key activity in the manufacturing chain, traditional computer aided process planning (CAPP) system fails to adapt to the production model of customization. Therefore, a novel method for variant design of process planning was proposed to develop CAPP system based on Tabular Layouts of Article Characteristics (Sach-Merk Leisten in German and SML for short). With the support of standard database of master process planning documents which are developed by parameterization technique, and instance process planning for special product (instance product) can be generated automatically by the sub-system of variant design of process planning. Finally, a CAPP system was developed for process design of rotor of steam turbine to validate the feasibility and applicability of the method.

Design verification and validation plan for the cold vacuum drying facility

International Nuclear Information System (INIS)

NISHIKAWA, L.D.

1999-01-01

The Cold Vacuum Drying Facility (CVDF) provides the required process systems, supporting equipment, and facilities needed for drying spent nuclear fuel removed from the K Basins. This document presents the both completed and planned design verification and validation activities

Robust Path Planning and Feedback Design Under Stochastic Uncertainty

Science.gov (United States)

Blackmore, Lars

2008-01-01

Autonomous vehicles require optimal path planning algorithms to achieve mission goals while avoiding obstacles and being robust to uncertainties. The uncertainties arise from exogenous disturbances, modeling errors, and sensor noise, which can be characterized via stochastic models. Previous work defined a notion of robustness in a stochastic setting by using the concept of chance constraints. This requires that mission constraint violation can occur with a probability less than a prescribed value.In this paper we describe a novel method for optimal chance constrained path planning with feedback design. The approach optimizes both the reference trajectory to be followed and the feedback controller used to reject uncertainty. Our method extends recent results in constrained control synthesis based on convex optimization to solve control problems with nonconvex constraints. This extension is essential for path planning problems, which inherently have nonconvex obstacle avoidance constraints. Unlike previous approaches to chance constrained path planning, the new approach optimizes the feedback gain as wellas the reference trajectory.The key idea is to couple a fast, nonconvex solver that does not take into account uncertainty, with existing robust approaches that apply only to convex feasible regions. By alternating between robust and nonrobust solutions, the new algorithm guarantees convergence to a global optimum. We apply the new method to an unmanned aircraft and show simulation results that demonstrate the efficacy of the approach.

Reliability-Based Optimal Design of Experiment Plans for Offshore Structures

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Faber, Michael Havbro; Kroon, I. B.

1993-01-01

Design of cost optimal experiment plans on the basis of a preposterior analysis is discussed. In particular the planning of on-site response measurements on offshore structures in order to update probabilistic models for fatigue life estimation is addressed. Special emphasis is given to modelling...

Planning for Program Design and Assessment Using Value Creation Frameworks

Science.gov (United States)

Whisler, Laurel; Anderson, Rachel; Brown, Jenai

2017-01-01

This article explains a program design and planning process using the Value Creation Framework (VCF) developed by Wenger, Trayner, and de Laat (2011). The framework involves identifying types of value or benefit for those involved in the program, conditions and activities that support creation of that value, data that measure whether the value was…

The HAL 9000 Space Operating System Real-Time Planning Engine Design and Operations Requirements

Science.gov (United States)

Stetson, Howard; Watson, Michael D.; Shaughnessy, Ray

2012-01-01

In support of future deep space manned missions, an autonomous/automated vehicle, providing crew autonomy and an autonomous response planning system, will be required due to the light time delays in communication. Vehicle capabilities as a whole must provide for tactical response to vehicle system failures and space environmental effects induced failures, for risk mitigation of permanent loss of communication with Earth, and for assured crew return capabilities. The complexity of human rated space systems and the limited crew sizes and crew skills mix drive the need for a robust autonomous capability on-board the vehicle. The HAL 9000 Space Operating System[2] designed for such missions and space craft includes the first distributed real-time planning / re-planning system. This paper will detail the software architecture of the multiple planning engine system, and the interface design for plan changes, approval and implementation that is performed autonomously. Operations scenarios will be defined for analysis of the planning engines operations and its requirements for nominal / off nominal activities. An assessment of the distributed realtime re-planning system, in the defined operations environment, will be provided as well as findings as it pertains to the vehicle, crew, and mission control requirements needed for implementation.

On the Planning and Design of Hospital Circulation Zones.

Science.gov (United States)

Jiang, Shan; Verderber, Stephen

2017-01-01

This present literature review explores current issues and research inconsistencies regarding the design of hospital circulation zones and the associated health-related outcomes. Large general hospitals are immense, highly sophisticated institutions. Empirical studies have indicated excessively institutional environments in large medical centers are a cause of negative effects to occupants, including stress, anxiety, wayfinding difficulties and spatial disorientation, lack of cognitional control, and stress associated with inadequate access to nature. The rise of patient-centered and evidence-based movements in healthcare planning and design has resulted in a general rise in the quality of hospital physical environments. However, as a core component of any healthcare delivery system, hospital circulation zones have tended to remain neglected within the comparatively broad palette of research conducted and reported to date. A systematic literature review was conducted based upon combinations of key words developed vis-à-vis a literature search in 11 major databases in the realm of the health sciences and the planning and design of built environments for healthcare. Eleven peer-reviewed articles were included in the analysis. Six research themes were identified according to associated health-related outcomes, including wayfinding difficulties and spatial disorientation, communication and socialization patterns, measures and control of excessive noise, patient fall incidents, and occupants' stress and satisfaction levels. Several knowledge gaps as well as commonalities in the pertinent research literature were identified. Perhaps the overriding finding is that occupants' meaningful exposure to views of nature from within hospital circulation zones can potentially enhance wayfinding and spatial navigation. Future research priories on this subject are discussed.

Systemic Operational Design: Enhancing the Joint Operation Planning Process

National Research Council Canada - National Science Library

Delacruz, Victor J

2007-01-01

Operational level commanders and their staffs require relevant and current joint doctrine that articulates the critical function of operational design and its role in the Joint Operation Planning Process (JOPP...

Learning from nuclear waste repository design: the ground-control plan

International Nuclear Information System (INIS)

Schmidt, B.

1988-01-01

At present, under a U.S. Department of Energy program, three repositories for commercial spent fuel-in salt, tuff and basalt-are in the phase of site characterization and conceptual design, and one pilot project for defense waste in salt is under development. Because of strict quality assurance requirements throughout design and construction, and the need to predict and ascertain in advance the satisfactory performance of the underground openings, underground openings in the unusual circumstances of the repository environment have been analysed. This will lead to an improved understanding of rock behavior and improved methods of underground analysis and design. A formalized ground control plan was developed, the principles of which may be applied to other types of projects. This paper summarizes the status of underground design and construction for nuclear waste repositories and presents some details of the ground control plan and its individual elements. (author)

Advanced energy design and operation technologies research: Recommendations for a US Department of Energy multiyear program plan

Energy Technology Data Exchange (ETDEWEB)

Brambley, M.R.; Crawley, D.B.; Hostetler, D.D.; Stratton, R.C.; Addision, M.S.; Deringer, J.J.; Hall, J.D.; Selkowitz, S.E.

1988-12-01

This document describes recommendations for a multiyear plan developed for the US Department of Energy (DOE) as part of the Advanced Energy Design and Operation Technologies (AEDOT) project. The plan is an outgrowth of earlier planning activities conducted for DOE as part of design process research under the Building System Integration Program (BSIP). The proposed research will produce intelligent computer-based design and operation technologies for commercial buildings. In this document, the concept is explained, the need for these new computer-based environments is discussed, the benefits are described, and a plan for developing the AEDOT technologies is presented for the 9-year period beginning FY 1989. 45 refs., 37 figs., 9 tabs.

SU-E-T-266: Proton PBS Plan Design and Robustness Evaluation for Head and Neck Cancers

International Nuclear Information System (INIS)

Liang, X; Tang, S; Zhai, H; Kirk, M; Kalbasi, A; Lin, A; Ahn, P; Tochner, Z; McDonough, J; Both, S

2014-01-01

Purpose: To describe a newly designed proton pencil beam scanning (PBS) planning technique for radiotherapy of patients with bilateral oropharyngeal cancer, and to assess plan robustness. Methods: We treated 10 patients with proton PBS plans using 2 posterior oblique field (2F PBS) comprised of 80% single-field uniform dose (SFUD) and 20% intensity-modulated proton therapy (IMPT). All patients underwent weekly CT scans for verification. Using dosimetric indicators for both targets and organs at risk (OARs), we quantitatively compared initial plans and verification plans using student t-tests. We created a second proton PBS plan for each patient using 2 posterior oblique plus 1 anterior field comprised of 100% SFUD (3F PBS). We assessed plan robustness for both proton plan groups, as well as a photon volumetric modulated arc therapy (VMAT) plan group by comparing initial and verification plans. Results: The 2F PBS plans were not robust in target coverage. D98% for clinical target volume (CTV) degraded from 100% to 96% on average, with maximum change Δ D98% of −24%. Two patients were moved to photon VMAT treatment due to insufficient CTV coverage on verification plans. Plan robustness was especially weak in the low-anterior neck. The 3F PBS plans, however, demonstrated robust target coverage, which was comparable to the VMAT photon plan group. Doses to oral cavity were lower in the Proton PBS plans compared to photon VMAT plans due to no lower exit dose to the oral cavity. Conclusion: Proton PBS plans using 2 posterior oblique fields were not robust for CTV coverage, due to variable positioning of redundant soft tissue in the posterior neck. We designed 3-field proton PBS plans using an anterior field to avoid long heterogeneous paths in the low neck. These 3-field proton PBS plans had significantly improved plan robustness, and the robustness is comparable to VMAT photon plans

Workspace experiments: a journey on planning participatory design

DEFF Research Database (Denmark)

Souza da Conceição, Carolina; Broberg, Ole

2017-01-01

Summative Statement: This paper presents a resource material in planning and performing participatory workspace design processes. This material brings up design dialogues into focus and gives insights on how to stage them, bridging the gap of merging user involvement with the well-defined design...... work-practice. Problem statement: There is a widespread interest in implementing user involvement in major building and construction projects. Nevertheless, it is also often difficult to translate the contributions from users to workspace design that seriously take on board the employees’ specific work...... practices as a platform for a desired change. There is a need of tool that manages to travel into a well-defined design work-practice and merge with it. Research Objective: We developed a resource material to merge user involvement within current designers’ practices when designing new workspaces. The aim...

Rethinking Design and Urban Planning for the Cities of the Future

Directory of Open Access Journals (Sweden)

Thomas L. Saaty

2017-08-01

Full Text Available Growth of urban areas and abandonment of rural areas are phenomena that increase quickly. The main consequences of urbanization are pollution, consumption of resources and energy, waste dumps, and junk yards. These aspects require a better planning and design of European urban metropolitan areas, considering benefits, opportunities, costs and risks (B.O.C.R., derivable by urban transformations and available resources. The paper consists of five parts. The first part contains some reflections on consequences of urban sprawl. In the second part, some possible kinds of cities are discussed (sustainable city, smart city, and compact city. The third part briefly describes a multicriteria decision-making approach known as the ‘analytic hierarchy process’ to deal with complex decisions. In the fourth part, alternative city models are analyzed (compact city, elevated city, green house city, and water city. Finally, in the fifth part, the criteria selected for the planning and design of the alternative city models are used for the prioritization of some European cities.

Research on key technology of planning and design for AC/DC hybrid distribution network

Science.gov (United States)

Shen, Yu; Wu, Guilian; Zheng, Huan; Deng, Junpeng; Shi, Pengjia

2018-04-01

With the increasing demand of DC generation and DC load, the development of DC technology, AC and DC distribution network integrating will become an important form of future distribution network. In this paper, the key technology of planning and design for AC/DC hybrid distribution network is proposed, including the selection of AC and DC voltage series, the design of typical grid structure and the comprehensive evaluation method of planning scheme. The research results provide some ideas and directions for the future development of AC/DC hybrid distribution network.

Examining pre-service science teachers' developing pedagogical design capacity for planning and supporting task-based classroom discussions

Science.gov (United States)

Ross, Danielle Kristina

Teachers face many challenges as we move forward into the age of the Next Generation Science Standards (NGSS) (Achieve, Inc., 2013). The NGSS aim to develop a population of scientifically literate and talented students who can participate in the "innovation-driven economy" (p. 1). In order to meet these goals, teachers must provide students with opportunities to engage in science and engineering practices (SEPs) and learn core ideas of these disciplines. This study followed pre-service secondary science teachers as they participated in a secondary science teacher preparation program intended to support the development of their pedagogical design capacity (Brown, 2009) related to planning and supporting whole-class taskbased discussions. Teacher educators in this program designed an intervention that aimed in supporting this development. This study examined a particular dimension of PDC -- specifically, PSTs effective use of resources to plan science lessons in which students engage in a high demand task, participate in SEPs, and discuss their work in a whole-class setting. In order to examine the effectiveness of the intervention, I had to define PDC a priori. I measured PDC by documenting how/whether PSTs engaged in the following instructional planning practices: developing Learning Goals, selecting and/or designing challenging tasks, anticipating student thinking, planning for monitoring student thinking, imagining the discussion storyline, planning questions, and planning marking strategies. Analyses showed a significant difference between baseline lesson plan scores and Instructional Performance scores. These findings suggest these patterns and changes were directly linked to the teacher preparation program. The mean increase in Instructional Performance scores during the course of the teacher preparation year further supports the effect of the teacher preparation coursework. Pre-service teachers with high pedagogical design capacity continually integrated the

Planning and architectural safety considerations in designing nuclear power plants

International Nuclear Information System (INIS)

Konsowa, Ahmed A.

2009-01-01

To achieve optimum safety and to avoid possible hazards in nuclear power plants, considering architectural design fundamentals and all operating precautions is mandatory. There are some planning and architectural precautions should be considered to achieve a high quality design and construction of nuclear power plant with optimum safety. This paper highlights predicted hazards like fire, terrorism, aircraft crash attacks, adversaries, intruders, and earthquakes, proposing protective actions against these hazards that vary from preventing danger to evacuating and sheltering people in-place. For instance; using safeguards program to protect against sabotage, theft, and diversion. Also, site and building well design focusing on escape pathways, emergency exits, and evacuation zones, and the safety procedures such as; evacuation exercises and sheltering processes according to different emergency classifications. In addition, this paper mentions some important codes and regulations that control nuclear power plants design, and assessment methods that evaluate probable risks. (author)

''Training plan optimized design'' methodology application to IBERDROLA - Power generation

International Nuclear Information System (INIS)

Gil, S.; Mendizabal, J.L.

1996-01-01

The trend in both Europe and the United States, towards the understanding that no training plan may be considered suitable if not backed by the results of application of the S.A.T. (Systematic Approach to Training) methodology, led TECNATOM, S.A. to apply thy methodology through development of an application specific to the conditions of the Spanish working system. The requirement that design of the training be coherent with the realities of the working environment is met by systematic application of the SAT methodology as part of the work analysis and job-based task analysis processes, this serving as a basis for design of the training plans

Economic market design and planning for electric power systems

CERN Document Server

Mili, Lamine

2010-01-01

Discover cutting-edge developments in electric power systems. Stemming from cutting-edge research and education activities in the field of electric power systems, this book brings together the knowledge of a panel of experts in economics, the social sciences, and electric power systems. In ten concise and comprehensible chapters, the book provides unprecedented coverage of the operation, control, planning, and design of electric power systems. It also discusses:. A framework for interdisciplinary research and education;. Modeling electricity markets;. Alternative economic criteria and proactiv.

Reflexive Planning as Design and Work

DEFF Research Database (Denmark)

Lissandrello, Enza; Grin, John

2011-01-01

in planning emerges as a new tool for generating critical knowledge and dialogue that can synthesise the perspectives of multiple actors in a common understanding, existing structural constraints and a collective imagination of alternative future possibilities. Such research highlights the potential......In recent years, planning theorists have advanced various interpretations of the notion of reflexivity, inspired by American pragmatism, complexity theory, hermeneutics, discursive and collaborative planning. Scholars agree that “reflexivity” has a strong temporal dimension: it not only aims...... to solve present planning problems, but to imagine and understand alternative trajectories for future action. This article explores the practical utility of reflexivity for planners, through a case study that focuses on a project to promote sustainable development in the Port of Amsterdam. Reflexivity...

Generational Pension Plan Designs

NARCIS (Netherlands)

Huang, Xiaohong; Mahieu, Ronald

2010-01-01

We propose a generational plan for the occupational pension provision in which people from the same generation are pooled in a generational fund. Each fund can set its own policies independently. This plan provides the benefits of differentiation missing in the prevailing collective plan and the

Dynamic supply chain network design with capacity planning and multi-period pricing

DEFF Research Database (Denmark)

Fattahi, Mohammad; Mahootchi, Masoud; Govindan, Kannan

2015-01-01

This paper addresses a new problem in designing and planning a multi-echelon and multi-product supply chain network over a multi-period horizon in which customer zones have price-sensitive demands. Based on price-demand relationships, a generic method is presented to obtain price levels...... for products and then, a mixed-integer linear programming model is developed. Due to the problem intractability, a simulated annealing algorithm that uses some developed linear relaxation-based heuristics for capacity planning and pricing is presented. Numerical results demonstrate the significance...

77 FR 3389 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2012-01-24

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants, State of West Virginia; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator Units, Plan Revision... final action to approve a revision to the West Virginia hospital/medical/infectious waste incinerator...

77 FR 3422 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2012-01-24

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants; State of West Virginia; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator Units, Plan Revision... revision to the West Virginia hospital/medical/infectious waste incinerator (HMIWI) Section 111(d)/ 129...

Application of virtual surgical planning with computer assisted design and manufacturing technology to cranio-maxillofacial surgery.

Science.gov (United States)

Zhao, Linping; Patel, Pravin K; Cohen, Mimis

2012-07-01

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

Human Factors Guidance for Control Room and Digital Human-System Interface Design and Modification, Guidelines for Planning, Specification, Design, Licensing, Implementation, Training, Operation and Maintenance

Energy Technology Data Exchange (ETDEWEB)

R. Fink, D. Hill, J. O' Hara

2004-11-30

Nuclear plant operators face a significant challenge designing and modifying control rooms. This report provides guidance on planning, designing, implementing and operating modernized control rooms and digital human-system interfaces.

Human Factors Guidance for Control Room and Digital Human-System Interface Design and Modification. Guidelines for Planning, Specification, Design, Licensing, Implementation, Training, Operation and Maintenance

International Nuclear Information System (INIS)

Fink, R.; Hill, D.; O'Hara, J.

2004-01-01

Nuclear plant operators face a significant challenge designing and modifying control rooms. This report provides guidance on planning, designing, implementing and operating modernized control rooms and digital human-system interfaces

Exploring governance learning: How policymakers draw on evidence, experience and intuition in designing participatory flood risk planning.

Science.gov (United States)

Newig, Jens; Kochskämper, Elisa; Challies, Edward; Jager, Nicolas W

2016-01-01

The importance of designing suitable participatory governance processes is generally acknowledged. However, less emphasis has been put on how decision-makers design such processes, and how they learn about doing so. While the policy learning literature has tended to focus on the substance of policy, little research is available on learning about the design of governance. Here, we explore different approaches to learning among German policymakers engaged in implementing the European Floods Directive. We draw on official planning documents and expert interviews with state-level policymakers to focus on learning about the procedural aspects of designing and conducting participatory flood risk management planning. Drawing on the policy learning and evidence-based governance literatures, we conceptualise six types of instrumental 'governance learning' according to sources of learning (endogenous and exogenous) and modes of learning (serial and parallel). We empirically apply this typology in the context of diverse participatory flood risk management planning processes currently unfolding across the German federal states. We find that during the first Floods Directive planning cycle, policymakers have tended to rely on prior experience in their own federal states with planning under the Water Framework Directive to inform the design and carrying out of participatory processes. In contrast, policymakers only sporadically look to experiences from other jurisdictions as a deliberate learning strategy. We argue that there is scope for more coordinated and systematic learning on designing effective governance, and that the latter might benefit from more openness to experimentation and learning on the part of policymakers.

The Virtual and the Real in Planning and Urban Design: Perspectives, Practices and Applications

NARCIS (Netherlands)

Yamu, Claudia; Poplin, Alenka; Devisch, Oswald; de Roo, Gert

2018-01-01

The Virtual and the Real: Perspectives, Practices and Applications for the Built Environment explores the merging relationship between physical and virtual spaces in planning and urban design. Technological advances such as smart sensors, interactive screens, locative media and evolving computation

Visual Sample Plan (VSP) Software: Designs and Data Analyses for Sampling Contaminated Buildings

International Nuclear Information System (INIS)

Pulsipher, Brent A.; Wilson, John E.; Gilbert, Richard O.; Nuffer, Lisa L.; Hassig, Nancy L.

2005-01-01

A new module of the Visual Sample Plan (VSP) software has been developed to provide sampling designs and data analyses for potentially contaminated buildings. An important application is assessing levels of contamination in buildings after a terrorist attack. This new module, funded by DHS through the Combating Terrorism Technology Support Office, Technical Support Working Group, was developed to provide a tailored, user-friendly and visually-orientated buildings module within the existing VSP software toolkit, the latest version of which can be downloaded from http://dqo.pnl.gov/vsp. In case of, or when planning against, a chemical, biological, or radionuclide release within a building, the VSP module can be used to quickly and easily develop and visualize technically defensible sampling schemes for walls, floors, ceilings, and other surfaces to statistically determine if contamination is present, its magnitude and extent throughout the building and if decontamination has been effective. This paper demonstrates the features of this new VSP buildings module, which include: the ability to import building floor plans or to easily draw, manipulate, and view rooms in several ways; being able to insert doors, windows and annotations into a room; 3-D graphic room views with surfaces labeled and floor plans that show building zones that have separate air handing units. The paper will also discuss the statistical design and data analysis options available in the buildings module. Design objectives supported include comparing an average to a threshold when the data distribution is normal or unknown, and comparing measurements to a threshold to detect hotspots or to insure most of the area is uncontaminated when the data distribution is normal or unknown

The implementation of the integrated design process in the hole-plan system

Directory of Open Access Journals (Sweden)

Won-Sun Ruy

2012-12-01

Full Text Available All current shipyards are using the customized CAD/CAM programs in order to improve the design quality and increase the design efficiency. Even though the data structures for ship design and construction are almost completed, the implementation related to the ship design processes are still in progress so that it has been the main causes of the bottleneck and delay during the middle of design process. In this study, we thought that the hole-plan system would be a good example which is remained to be improved. The people of outfitting division who don't have direct authority to edit the structural panels, should request the hull design division to install the holes for the outfitting equipment. For acceptance, they should calculate the hole position, determine the hole type, and find the intersected contour of panel. After consideration of the hull people, the requested holes are manually installed on the hull structure. As the above, many processes are needed such as communication and discussion between the divisions, drawings for hole-plan, and the consideration for the structural or production compatibility. However this iterative process takes a lot of working time and requires mental pressure to the related people and cross-division conflict. This paper will handle the hole-plan system in detail to automate the series of process and minimize the human efforts and time-consumption.

Design of PH-based accelerated life testing plans under multiple-stress-type

International Nuclear Information System (INIS)

Elsayed, E.A.; Zhang Hao

2007-01-01

Accelerated life testing (ALT) is used to obtain failure time data quickly under high stress levels in order to predict product life performance under design stress conditions. Most of the previous work on designing ALT plans is focused on the application of a single stress. However, as components or products become more reliable due to technological advances, it becomes more difficult to obtain significant amount of failure data within reasonable amount of time using single stress only. Multiple-stress-type ALTs have been employed as a means of overcoming such difficulties. In this paper, we design optimum multiple-stress-type ALT plans based on the proportional hazards model. The optimum combinations of stresses and their levels are determined such that the variance of the reliability estimate of the product over a specified period of time is minimized. The use of the model is illustrated using numerical example, and sensitivity analysis shows that the resultant optimum ALT plan is robust to the deviation in model parameters

What to Do before the Violence Happens: Designing the Crisis Communication Plan.

Science.gov (United States)

Armistead, Lew

1996-01-01

When a crisis arrives, two elements can help save your school's reputation: the principal's precrisis credibility with the public and the press and a crisis communication plan. Crisis plans should designate a school spokesperson and procedures for gathering, communicating, and disseminating information. Key audiences include staff, students, and…

21 CFR 822.11 - What should I consider when designing my plan to conduct postmarket surveillance?

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false What should I consider when designing my plan to conduct postmarket surveillance? 822.11 Section 822.11 Food and Drugs FOOD AND DRUG ADMINISTRATION... Surveillance Plan § 822.11 What should I consider when designing my plan to conduct postmarket surveillance...

Design of Logistics Route Planning for Printing Enterprises Based on Baidu Map

Directory of Open Access Journals (Sweden)

Da Zhong-Yue

2017-01-01

Full Text Available As traditional printing industry is facing fierce competition in the market and logistics becomes a new sources of growth, the traditional printing enterprises want to build and improve their logistics system. So in this paper, the author has designed the logistics planning system based on the Baidu map development kit. It has the function of route planning and location tracking. This system meet the printing enterprise logistics route planning and tracking demand.

Treatment planning and smile design using composite resin.

Science.gov (United States)

Marus, Robert

2006-05-01

Recent advances in dental materials and adhesive protocols have expanded the restorative procedures available to today's clinicians. Used in combination with proper treatment planning, these innovations enable dental professionals to provide enhanced aesthetic care that achieves the increasing expectations of their patients. Using a case presentation, this article will document the steps required to harmoniously integrate smile design, material selection, and patient communication that are involved in the provisional of aesthetic dental care. This article discusses the utilization of composite resin as a tool to enhance the patient's smile. Upon reading this article, the reader should: Become familiar with a smile-enhancing technique which can be completed in one office visit. Realize the benefits that intraoral composite mockups offer in terms of prototyping and confirming patient satisfaction.

Establishment of the international collaboration and licensing preparation planning for the specific design of a prototype SFR

International Nuclear Information System (INIS)

Kim, Y. G.; Joo, H. K.; Cho, C. H.; Yoo, J. W.; Lee, D. U.; Ahn, K. S.; Hwang, Y. S.

2013-05-01

The conceptual design of prototype of Gen IV SFR (PGSFR) will be early determined through the review of the international experts. After this, the technology demonstration plan and validation of fuel design will be determined in more detail. The project will be accomplished efficiently by introducing the proven technology already validated from the international collaboration. The conceptual design and its requirements of PGSFR will be reviewed by ANL, who has a lot of design experiences in the metal fueled SFR development. The collaboration with ANL has been done through Work For Others (WFO) contract, and the MOU was signed between SFRA and Terra Power(USA), and SFRA and IGCAR. The licensing issues raised during PFBR and FBTR licensing in India will be discussed and reflected into the PGSFR design by inviting the high level expert from India, for example Dr. Chetal in IGCAR. The specific design, technology validation plan and fuel development plan will be established in more detail through the annual International Technical Review Meeting (ITRM) and experimental facilities available from the international institute and companies, which will be the basis for shortening the project period and to reduce the development cost

Planned Missing Data Designs for Spline Growth Models in Salivary Cortisol Research

NARCIS (Netherlands)

Hogue, C.M.; Pornprasertmanit, S.; Fry, M.D.; Rhemtulla, M.; Little, T.D.

2013-01-01

Salivary cortisol is often used as an index of physiological and psychological stress in exercise science and psychoneuroendocrine research. A primary concern when designing research studies examining cortisol stems from the high cost of analysis. Planned missing data designs involve intentionally

Mathematical optimization for planning and design of cycle paths

Energy Technology Data Exchange (ETDEWEB)

LiÑan Ruiz, R.J.; Perez Aracil, J.; Cabrera Cañizares, V.

2016-07-01

The daily need for citizens to move for different activities, whatever its nature, has been greatly affected by the changes. The advantages resulting from the inclusion of the bicycle as a mode of transport and the proliferation of its use among citizens are numerous and extend both in the field of urban mobility and sustainable development.Currently, there are a number of programs for the implementation, promotion or increased public participation related to cycling in cities. But ultimately, each and every one of these initiatives have the same goal, to create a mesh of effective, useful and cycling trails that allow the use of bicycles in preferred routes with high guarantees of security, incorporating bicycle model intermodal urban transport.With the gradual implementation of bike lanes, many people have begun to use them to get around the city. But everything again needs a period of adaptation, and the reality is that the road network for these vehicles is full of obstacles to the rider. The current situation has led to the proposal that many kilometers of cycle paths needed to supply the demand of this mode of transport and, if implemented and planned are correct and sufficient.This paper presents a mathematical programming model for optimal design of a network for cyclists is presented. Specifically, the model determines a network of bicycle infrastructure, appropriate to the characteristics of a network of existing roads.As an application of the proposed model, the result of these experiments give a number of useful conclusions for planning and designing networks of cycle paths from a social perspective, applied to the case in the city of Malaga. (Author)

State, planning and design of Jodna spa in Novi Sad

Directory of Open Access Journals (Sweden)

Garača Vuk

2012-01-01

Full Text Available The paper treats the area of Jodna spa in Novi Sad, which largely coincides with Futoški park, making with it the indissoluble unity. The main problem in the functioning of the Jodna psa is the fact that in legal sense Jodna spa does not exists, and in spatial sense there are still all of its content. The case of the paper is Jodna spa area, which includes the Special Hospital for Rheumatic Diseases, Hotel 'Park', Sports Center 'Sajmište' and Futoški park, which integrate them. The question of the Jodna spa planning, as well as the modern city recreation, spa and tourist center, is the goal of this paper. For this purpose it was necessary to show the historical background of the development of Jodna spa, to make the assessment of the state, critically analyze spatial plans which treat it and provide concrete suggestions for its design and equipping.

Acoustic design of open plan schools and comparison of requirements

DEFF Research Database (Denmark)

Møller Petersen, Claus; Rasmussen, Birgit

2012-01-01

between groups and satisfac¬tory speech intelligibility internally in groups. This paper describes the newest Danish requirements and recommendations for such open plan areas and presents the design, measurements and subjective evaluation of two newer Danish schools. According to the users, the general...... conditions at both schools are satisfactory due to both optimized acoustical conditions and teaching methods adapted to the special open environment. The results from room acoustical modelling, verification measurements and questionnaire survey are presented and evaluated in relation to the newest Danish...

Transfer cask system design activities: status and plan

International Nuclear Information System (INIS)

Locke, D.; Gutierrez, C. Gonzalez; Damiani, C.; Gracia, V.; Friconneau, J.-P.; Martins, J.-P.; Blight, J.

2011-01-01

The ITER Cask and Plug Remote Handling System (CPRHS), a.k.a. Transfer Cask System, is a critical element of the ITER Remote Maintenance System (IRMS) devoted to transportation of components between the Tokamak building and Hot Cell. Due to the necessary confinement of contaminated components the CPRHS is defined as Safety Importance Class 1 (SIC-1) plus the mobile nature of the CPRHS brings with it a significant number of complex interfaces with other ITER sub-systems. With a total CPRHS fleet in excess of 20 units, including seven typologies, the management of design and procurement needs to be carefully planned and implemented to ensure compliance with ITER's requirements. Fusion for Energy (F4E) and its beneficiaries/contractors are currently working under ITER Task Agreements (ITAs) on the conceptual design of the CPRHS and, following the signing of the Procurement Arrangement (PA) in mid 2012, will take responsibility for the entire CPRHS fleet. F4E must, therefore, develop a robust strategy to meet the needs of both ITER machine assembly (for which a number of CPRHS units will be utilised) and the remote maintenance of ITER. Within this context this paper will present the status of the current CPRHS design activities, highlight some of the significant issues which will be faced during procurement and present the overall strategy which is being implemented by F4E in order to meet these challenging objectives.

78 FR 34973 - Proposal for Sewage Sludge Incinerators State Plan for Designated Facilities and Pollutants; Indiana

Science.gov (United States)

2013-06-11

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 62 [EPA-R05-OAR-2013-0372; FRL-9820-9] Proposal for Sewage Sludge Incinerators State Plan for Designated Facilities and Pollutants; Indiana AGENCY... direct final rulemaking, Indiana's State Plan to control air pollutants from Sewage Sludge Incinerators...

Nez Perce tribal hatchery project : combined-planning and design and operations and maintenance reports, annual report, 2000

International Nuclear Information System (INIS)

Larson, Roy Edward; Walker, Grant

2002-01-01

Nez Perce Tribal Hatchery (NPTH) Year-2000 Combined Maintenance and Operations (O and M) and Planning and Design (P and D) contract is hereby completed based on this annual report patterned after the Statement of Work (SOW) for the project as contracted with Bonneville Power Administration. Primary project activities focused on completion of the Northwest Power Planning Council Step-3 process that: (1) Accepted final design, (2) Authorized a capital construction amount of $16,050,000, and (3) Authorized contractor selection, and (4) Provided construction site dedication, and (5) Implemented construction activities over an anticipated 2-year period of July 2000 through October 2002

Overview of energy-conserving development planning and design techniques based on five case studies

Energy Technology Data Exchange (ETDEWEB)

1980-06-01

Findings and recommendations are presented of a review of five case studies of ways to conserve energy through development planning and site design in communities. Two approaches were used. In the first approach, a conventional, pre-existing plan was analyzed to determine potential energy use. Once energy-conservation options were identified and evaluated, the conventional plan was modified by employing those options. This approach was used in The Woodlands, Burke Center, and Radisson studies. In the second approach, energy-conservation options are independently identified and evaluated. Those options that passed specific criteria screening were then utilized in developing one or more totally new plans based on energy objectives. This approach was used in Greenbrier and Shenandoah. Radisson is a new town on the outskirts of Syracuse, New York. Greenbrier is a 3000 acre planned community adjacent to Norfolk and Virginia Beach. Shenandoah is a proposed new town in the Atlanta urbanized area. The Woodlands is a new community under development north of Houston. Burke Center is a residential planned unit development in Fairfax County, Virgnia. (MCW)

Strategies in architectural design and urban planning in the context of energy efficiency in buildings

Directory of Open Access Journals (Sweden)

Vuksanović Dušan

2007-01-01

Full Text Available Some of the design concepts in architecture and urban planning, created on demands of energy efficiency, that apply in early stages of design process a schematic design, i.e. in the phase of creating the basis of architectural or planning solution, are analyzed in this paper. These design strategies have a role to be comprehensive enough to provide application of their key potentials, but at the same time they need to remain simple enough and not burden a designer with inadequate number of information. Design models for passive heating, passive cooling and natural lighting that refer to the buildings mainly have been considered, together with the principles for the settlements or building groups. Guiding a design concept towards the one of described design principles e.g. their application within the diurnal and seasonal cycles, depends on local climatic conditions and type of building (residential, commercial or educational. The presentation of a model is followed by the explanation of the phenomena of impacts/influences (climate program and answers (the concept, passive components related to a certain strategy, and by the illustration of a strategy on a realized object (case study. Issues of design strategies on energy efficiency are considered through different levels, e.g. through spatial organization, form and added components of buildings, as well as structure and characteristics of elements of external structures - facades and roofs.

STEM Teachers' Planned and Enacted Attempts at Implementing Engineering Design-Based Instruction

Science.gov (United States)

Capobianco, Brenda M.; Rupp, Madeline

2014-01-01

This study investigates grades 5 and 6 science, technology, engineering, and mathematics (STEM) teachers' planned and actualized engineering design-based instruction, the instruments used to characterize their efforts, and the implications this work has for teachers' implementations of an integrated approach to STEM education.…

Design and implementation of a financial planning and tracking system for the Nova Project

International Nuclear Information System (INIS)

Holcomb, F.

1982-01-01

The Nova project is a 185 million dollar DOE funded project to build an experimental facility to demonstrate the thermonuclear ignition of laser fusion targets. This paper describes the design and implementation considerations for the project's computerized performance measurement financial planning and tracking system and critiques its actual operation

Planned Missing Data Designs for Spline Growth Models in Salivary Cortisol Research

Science.gov (United States)

Hogue, Candace M.; Pornprasertmanit, Sunthud; Fry, Mary D.; Rhemtulla, Mijke; Little, Todd D.

2013-01-01

Salivary cortisol is often used as an index of physiological and psychological stress in exercise science and psychoneuroendocrine research. A primary concern when designing research studies examining cortisol stems from the high cost of analysis. Planned missing data designs involve intentionally omitting a random subset of observations from data…

Health impact assessment in planning: Development of the design for health HIA tools

International Nuclear Information System (INIS)

Forsyth, Ann; Slotterback, Carissa Schively; Krizek, Kevin J.

2010-01-01

How can planners more systematically incorporate health concerns into practical planning processes? This paper describes a suite of health impact assessment tools (HIAs) developed specifically for planning practice. Taking an evidence-based approach the tools are designed to fit into existing planning activities. The tools include: a short audit tool, the Preliminary Checklist; a structured participatory workshop, the Rapid HIA; an intermediate health impact assessment, the Threshold Analysis; and a set of Plan Review Checklists. This description provides a basis for future work including assessing tool validity, refining specific tools, and creating alternatives.

Auto Mission Planning System Design for Imaging Satellites and Its Applications in Environmental Field

Directory of Open Access Journals (Sweden)

He Yongming

2016-10-01

Full Text Available Satellite hardware has reached a level of development that enables imaging satellites to realize applications in the area of meteorology and environmental monitoring. As the requirements in terms of feasibility and the actual profit achieved by satellite applications increase, we need to comprehensively consider the actual status, constraints, unpredictable information, and complicated requirements. The management of this complex information and the allocation of satellite resources to realize image acquisition have become essential for enhancing the efficiency of satellite instrumentation. In view of this, we designed a satellite auto mission planning system, which includes two sub-systems: the imaging satellite itself and the ground base, and these systems would then collaborate to process complicated missions: the satellite mainly focuses on mission planning and functions according to actual parameters, whereas the ground base provides auxiliary information, management, and control. Based on the requirements analysis, we have devised the application scenarios, main module, and key techniques. Comparison of the simulation results of the system, confirmed the feasibility and optimization efficiency of the system framework, which also stimulates new thinking for the method of monitoring environment and design of mission planning systems.

Plan for the design, development, and implementation, and operation of the National Water Information System

Science.gov (United States)

Edwards, M.D.

1987-01-01

The Water Resources Division of the U.S. Geological Survey is developing a National Water Information System (NWIS) that will integrate and replace its existing water data and information systems of the National Water Data Storage and Retrieval System, National Water Data Exchange, National Water-Use Information, and Water Resources Scientific Information Center programs. It will be a distributed data system operated as part of the Division 's Distributed Information System, which is a network of computers linked together through a national telecommunication network known as GEONET. The NWIS is being developed as a series of prototypes that will be integrated as they are completed to allow the development and implementation of the system in a phased manner. It also is being developed in a distributed manner using personnel who work under the coordination of a central NWIS Project Office. Work on the development of the NWIS began in 1983 and it is scheduled for completion in 1990. This document presents an overall plan for the design, development, implementation, and operation of the system. Detailed discussions are presented on each of these phases of the NWIS life cycle. The planning, quality assurance, and configuration management phases of the life cycle also are discussed. The plan is intended to be a working document for use by NWIS management and participants in its design and development and to assist offices of the Division in planning and preparing for installation and operation of the system. (Author 's abstract)

Pension fund efficiency: the impact of scale, governance and plan design

OpenAIRE

Jacob Bikker; Jan de Dreu

2006-01-01

Administrative and investment costs per participant appear to vary widely across pension funds. These costs are important because they reduce the rate of return on the investments of pension funds and consequently raise the cost of retirement security. This paper examines the impact of determinants of these costs, such as the size, governance, pension plan design and outsourcing decisions, using data on all Dutch pension funds across the 1992-2004 period, including more than 10,000 observatio...

Sustainable winter cities: Future directions for planning, policy and design

Science.gov (United States)

Pressman, Norman E. P.

Attempts to generate a "climate-responsive" northern urban form are part of a relatively recent phenomenon and field of investigation. In conjunction with the international "winter cities" movement, the need has been established for explicit, systematic inquiry directed toward national and local action to improve the comfort and lifestyles of all northern inhabitants. It is important to recognize that winter-induced discomforts exist and that they must be acknowledged in planning theory and practice. For northern cities to function more satisfactorily, the negative impacts of winter must be reduced while its beneficial characteristics are enhanced. While not all summer activities can or should be abandoned during winter, proper micro-climatic control is essential if human life is to be retained outside. The outdoor season should be extended since so much indoor isolation occurs. The main principles to be incorporated in exemplary "winter city" design should be contact with nature, year-round usability, user participation, cultural continuity, and the creation of comfortable micro-climatic conditions throughout much of the city's open spaces. All valuable sources of inspiration must be harnessed in the attempt to mediate between organic regionalism and internationalism, on the one hand, and romanticism and pragmatic realism, on the other. Creating optimum conditions for human well-being, habitation, work and intellectual development in each of the four seasons is vital under harsh environments. Adopting a climate-sensitive approach to planning policy and urban design can render everyday life less stressful, especially during the lengthy winter periods found in many northern latitude and high altitude settings.

Waste analysis plan for confirmation or completion of Tank Farms backlog waste designation

International Nuclear Information System (INIS)

1993-08-01

This waste analysis plan satisfies the requirements of Item 3 of Ecology Order 93NM-201 as amended per the Settlement Agreement. Item 3 states: ''Within forty (40) calendar days of receipt of this Order, the US Department of Energy Richland Operations (DOE-RL) and Westinghouse Hanford Company (WHC) shall provide Ecology with a plan for review and approval detailing the established criteria and procedures for waste inspection, segregation, sampling, designation, and repackaging of all containers reported in item number-sign 1. The report shall include sampling plan criteria for different contaminated media, i.e., soils, compactable waste, high-efficiency particular air (HEPA) filters, etc., and a schedule for completing the work within the time allowed under this Order.'' Item 3 was amended per the Settlement Agreement as follows: ''In addition to the waste inspection plans for the ''unknowns'' previously provided and currently being supplemented, DOE-RL and WHC shall provide a draft waste analysis plan for the containers reported in Item 1 of the Order to Ecology by July 12, 1993. A final, DOE-RL approved waste analysis plan shall be submitted to Ecology by September 1, 1993, for Ecology's written approval by September 15, 1993.'' Containers covered by the Order, Settlement Agreement, and this waste analysis plan consist of all those reported under Item 1 of the Order, less any containers that have been identified in unusual occurrences reported by Tank Farms. This waste analysis plan describes the procedures that will be undertaken to confirm or to complete designation of the solid waste identified in the Order

7 CFR 1717.605 - Design standards, plans and specifications, construction standards, and RUS accepted materials.

Science.gov (United States)

2010-01-01

..., construction standards, and RUS accepted materials. 1717.605 Section 1717.605 Agriculture Regulations of the... standards, plans and specifications, construction standards, and RUS accepted materials. All borrowers... system design, construction standards, and the use of RUS accepted materials. Borrowers must comply with...

Revising the South African guidelines for human settlement planning and design (the red book)

CSIR Research Space (South Africa)

Van Niekerk, Willemien

2015-11-01

Full Text Available The Guidelines for Human Settlement Planning and Design, commonly known as the Red Book, is a South African publication aimed at providing practical guidance to built environment professionals in support of the creation of sustainable and vibrant...

Developing plan and pre-conceptual design of target system for JAERI`s high intensity neutron source

Energy Technology Data Exchange (ETDEWEB)

Hino, Ryutaro; Kaminaga, Masanori; Haga, Katsuhiro; Ishikura, Syuichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Nakamura, Fumito; Uchida, Shoji

1997-11-01

This paper presents an outline of developing plan of a target system and topics obtained by a pre-conceptual design, which aims to establish a technology base of the target system and to make clear a system concept. In the plan, two types of target - solid and mercury targets - are to be developed for a neutron scattering facility. Information obtained through the development shall be applied to designs of an irradiation and a transmutation facilities. Through the pre-conceptual design, system arrangement, scale etc. were made clear: total weight will be 12000 ton, and 26 beam lines with beam shutters will be equipped for 4 moderators. Engineering problems were also made clear through the design; high flux heat removal, dynamic stress caused by thermal shock and pressure wave, loop technology for the mercury target and a slurry moderator consisting of methane pellets and liquefied hydrogen. We are now constructing new test apparatuses and arranging computer codes for solving these problems. (author)

Acoustic design of open-plan offices and comparison of requirements in the Nordic countries

DEFF Research Database (Denmark)

Petersen, Claus Møller; Rasmussen, Birgit

2018-01-01

In the Nordic countries, most office buildings include open-plan offices. However, to optimize working conditions, such spaces require special acoustic design to obtain reasonable sound attenuation between groups and satisfactory speech intelligibility internally in groups, although optimal worki...

Landscape architecture between politics and science : an integrative perspective on landscape planning and design in the network society

NARCIS (Netherlands)

Jonge, de J.M.

2009-01-01

This thesis examines the typical nature of design thinking, which is compared and contrasted with scientific and political thinking. A theretical framework is formulated and applied to landscape planning and design. During the 20th century the established operational orientation in landscape

78 FR 45152 - Approval and Promulgation of Implementation Plans and Designation of Areas; North Carolina...

Science.gov (United States)

2013-07-26

... North Carolina SIP meets the requirements of section 182(b)(5) applicable for purposes of redesignation...] Approval and Promulgation of Implementation Plans and Designation of Areas; North Carolina; Redesignation... supplemented on March 28, 2013, the State of North Carolina, through the North Carolina Department of...

A classification plan of design class for systems of an advanced research reactor

International Nuclear Information System (INIS)

Yoon, Doo Byung; Ryu, Jeong Soo

2005-01-01

Advanced Research Reactor(ARR) is being designed by KAERI since 2002. The final goal of the project is to develop a new and unique research reactor model which is superior in safety and economical aspects. The conceptual design for systems, structures, and components of the ARR will be completed by 2005. The basic design for the systems, structures, and components of the ARR will be performed from 2006. Based on the technical experiences on the design and operation of the HANARO, the ARR will be designed. It is necessary to classify the safety class, quality class, and seismic category for the systems, structures, and components. The objective of this work is to propose a classification plan of design class for systems, structures, and components of the ARR. To achieve this purpose, the revision status of the regulations that used as criteria for determining the design class of the systems, structures, and components of the HANARO were investigated. In addition, the present revision status of the codes and the standards that utilized for the design of the HANARO were investigated. Based on these investigations, the codes and the standards for the design of the systems, structures, and components of the ARR were proposed. The feasibility of the proposed classification plan will be verified by performing the conceptual and basic design of the systems, structures, and components of the ARR

An operational information systems architecture for assessing sustainable transportation planning: principles and design.

Science.gov (United States)

Borzacchiello, Maria Teresa; Torrieri, Vincenzo; Nijkamp, Peter

2009-11-01

This paper offers the description of an integrated information system framework for the assessment of transportation planning and management. After an introductory exposition, in the first part of the paper, a broad overview of international experiences regarding information systems on transportation is given, focusing in particular on the relationship between transportation system's performance monitoring and the decision-making process, and on the importance of this connection in the evaluation and planning process, in Italian and European cases. Next, the methodological design of an information system to support efficient and sustainable transportation planning and management aiming to integrate inputs from several different data sources is presented. The resulting framework deploys modular and integrated databases which include data stemming from different national or regional data banks and which integrate information belonging to different transportation fields. For this reason, it allows public administrations to account for many strategic elements that influence their decisions regarding transportation, both from a systemic and infrastructural point of view.

NATO Conference on Manpower Planning and Organization Design

CERN Document Server

Niehaus, Richard

1978-01-01

This volume is the proceedings of the conference entitled "Manpower Planning and Organization Design" which was held in Stresa, Italy, 20-24 June 1977. The Conference was sponsored by the NATO Scientific Affairs Division and organized jointly through the Special Programs Panels on Human Factors and on Systems Science. Two Conference Directors were appointed with overall responsibilities for the programme and for policy, and they were assisted in their tasks by a small advisory panel consisting of Professor A. Charnes (University of Texas), Professor W.W. Cooper (Carnegie Mellon University, now at Harvard University) and Dr. F.A. Heller (TavistQck Institute of Human Relations). Professor R. Florio of Bergamo kindly agreed to become Administrative Director and, as such, was responsible for all the local arrangements. The Conference Directors were further assisted by "national points of contact" appointed from each of the member countries of NATO. These national representatives played a substantial part in the s...

300-FF-1 remedial design report/remedial action work plan

Energy Technology Data Exchange (ETDEWEB)

Gustafson, F.W.

1997-02-01

The 300 Area has been divided into three operable units 300-FF-1, 300-FF-2, and 300-FF-5 all of which are in various stages of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) process. The 300-FF-1 Operable Unit, the subject of this report, includes liquid waste disposal sites, landfills, and a burial ground. This Remedial Design Report/Remedial Action Work Plan (RDR/RAWP) provides a summary description of each waste site included in the 300-FF-1 Operable Unit, the basis for remedial actions to be taken, and the remedial action approach and management process for implementing these actions. The remedial action approach and management sections provide a description of the remedial action process description, the project schedule, the project team, required planning documentation, the remedial action change process, the process for verifying attainment of the remedial action goals, and the required CERCLA and RCRA closeout documentation. Appendix A provides additional details on each waste site. In addition to remediation of the waste sites, waste generated during the remedial investigation/feasibility study portions of the project will also be disposed at the Environmental Restoration Disposal Facility (ERDF). Appendix B provides a summary of the modeling performed in the 300-FF-1 Phase 3 FS and a description of the modeling effort to be used to show attainment of the remedial action goals. Appendix C provides the sampling and analysis plan (SAP) for all sampling and field-screening activities performed during remediation and for verification of attainment with the remedial action goals. Appendix D provides the public involvement plan, prepared to ensure information is provided to the public during remedial design and remedial action processes.

300-FF-1 remedial design report/remedial action work plan

International Nuclear Information System (INIS)

Gustafson, F.W.

1997-02-01

The 300 Area has been divided into three operable units 300-FF-1, 300-FF-2, and 300-FF-5 all of which are in various stages of the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) process. The 300-FF-1 Operable Unit, the subject of this report, includes liquid waste disposal sites, landfills, and a burial ground. This Remedial Design Report/Remedial Action Work Plan (RDR/RAWP) provides a summary description of each waste site included in the 300-FF-1 Operable Unit, the basis for remedial actions to be taken, and the remedial action approach and management process for implementing these actions. The remedial action approach and management sections provide a description of the remedial action process description, the project schedule, the project team, required planning documentation, the remedial action change process, the process for verifying attainment of the remedial action goals, and the required CERCLA and RCRA closeout documentation. Appendix A provides additional details on each waste site. In addition to remediation of the waste sites, waste generated during the remedial investigation/feasibility study portions of the project will also be disposed at the Environmental Restoration Disposal Facility (ERDF). Appendix B provides a summary of the modeling performed in the 300-FF-1 Phase 3 FS and a description of the modeling effort to be used to show attainment of the remedial action goals. Appendix C provides the sampling and analysis plan (SAP) for all sampling and field-screening activities performed during remediation and for verification of attainment with the remedial action goals. Appendix D provides the public involvement plan, prepared to ensure information is provided to the public during remedial design and remedial action processes

Design and implementation of motion planning of inspection and maintenance robot for ITER-like vessel

Energy Technology Data Exchange (ETDEWEB)

Wang, Hesheng; Lai, Yinping [Department of Automation, Shanghai Jiao Tong University, Shanghai 200240 (China); Key Laboratory of System Control and Information Processing, Ministry of Education of China (China); Chen, Weidong, E-mail: wdchen@sjtu.edu.cn [Department of Automation, Shanghai Jiao Tong University, Shanghai 200240 (China); Key Laboratory of System Control and Information Processing, Ministry of Education of China (China); Cao, Qixin [Institute of Robotics, Shanghai Jiao Tong University, Shanghai 200240 (China)

2015-12-15

Robot motion planning is a fundamental problem to ensure the robot executing the task without clashes, fast and accurately in a special environment. In this paper, a motion planning of a 12 DOFs remote handling robot used for inspecting the working state of the ITER-like vessel and maintaining key device components is proposed and implemented. Firstly, the forward and inverse kinematics are given by analytic method. The work space and posture space of this manipulator are both considered. Then the motion planning is divided into three stages: coming out of the cassette mover, moving along the in-vessel center line, and inspecting the D-shape section. Lastly, the result of experiments verified the performance of the motion design method. In addition, the task of unscrewing/screwing the screw demonstrated the feasibility of system in function.

Economic Design of Acceptance Sampling Plans in a Two-Stage Supply Chain

Directory of Open Access Journals (Sweden)

Lie-Fern Hsu

2012-01-01

Full Text Available Supply Chain Management, which is concerned with material and information flows between facilities and the final customers, has been considered the most popular operations strategy for improving organizational competitiveness nowadays. With the advanced development of computer technology, it is getting easier to derive an acceptance sampling plan satisfying both the producer's and consumer's quality and risk requirements. However, all the available QC tables and computer software determine the sampling plan on a noneconomic basis. In this paper, we design an economic model to determine the optimal sampling plan in a two-stage supply chain that minimizes the producer's and the consumer's total quality cost while satisfying both the producer's and consumer's quality and risk requirements. Numerical examples show that the optimal sampling plan is quite sensitive to the producer's product quality. The product's inspection, internal failure, and postsale failure costs also have an effect on the optimal sampling plan.

Geotechnical information as an important element when planning and designing civil engineering work Bogotá

OpenAIRE

Denisse Cangrejo Aljure; Carlos Gustavo Infante

2010-01-01

The city of Bogota provides a dynamic scenario re civil construction work; it is thereby essential to have relevant information available for the suitable planning and evaluation of engineering work from both the structural and budgetary points of view. The moisture content of soil has become a most important variable, given its great impact on placing structures in Bogota. This is why this work on city zoning aimed at orientating planning and designing civil engineering work has been done a...

PC-based Multiple Information System Interface (PC/MISI) design plan

Science.gov (United States)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The general design plan for the implementation of a common user interface to multiple remote information systems within a microcomputer-based environment is presented. The intent is to provide a framework for the development of detailed specifications which will be used as guidelines for the actual development of the system.

Flexibility in Flood Management Design: Proactive Planning Under Climate Change Uncertainty

Science.gov (United States)

Smet, K.; de Neufville, R.; van der Vlist, M.

2015-12-01

This paper presents an innovative, value-enhancing procedure for effective planning and design of long-lived flood management infrastructure given uncertain future flooding threats due to climate change. Designing infrastructure that can be adapted over time is a method to safeguard the efficacy of current design decisions given uncertainty about rates and future impacts of climate change. This paper explores the value of embedding "options" in a physical structure, where an option is the right but not the obligation to do something at a later date (e.g. over-dimensioning a floodwall foundation now facilitates a future height addition in response to observed increases in sea level; building of extra pump bays in a pumping station now enables the addition of pumping capacity whenever increased precipitation warrants an expansion.) The proposed procedure couples a simulation model that captures future climate induced changes to the hydrologic operating environment of a structure, with an economic model that estimates the lifetime economic performance of alternative investments. The economic model uses Real "In" Options analysis, a type of cash flow analysis that quantifies the implicit value of options and the flexibility they provide. This procedure is demonstrated using replacement planning for the multi-functional pumping station IJmuiden on the North Sea Canal in the Netherlands. Flexibility in design decisions is modelled, varying the size and specific options included in the new structure. Results indicate that the incorporation of options within the structural design has the potential to improve its economic performance, as compared to more traditional, "build it once and build it big" designs where flexibility is not an explicit design criterion. The added value resulting from the incorporation of flexibility varies with the range of future conditions considered, as well as the options examined. This procedure could be applied more broadly to explore

Implementation Plan for Chemical Industry R&D Roadmap for Nanomaterials by Design

Energy Technology Data Exchange (ETDEWEB)

none,

2006-04-01

The purpose of this effort is to develop an implementation plan to realize the vision and goals identified in the Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function.

Conceptual planning and designing of a greywater recycling system for a nursery house and a daycare centre in Karagwe, Tanzania

OpenAIRE

Shrestha, Sudina

2017-01-01

Engineers without Borders (EWB) Finland started a project to plan, conceptualize and design a nursery centre and a daycare centre in Kayanga, Tanzania. During the planning phase, EWB Finland was informed about inconsistent water supply in the area of the site.Hence, this thesis was designed to overcome the insufficiency of water in the site location. The presumed value of water consumption for the site indicated a large percentage of greywater generation that are usually drained down the ...

Designing a strategic plan development approach for integrated area development projects

NARCIS (Netherlands)

de Kort, Inge

2009-01-01

Increasingly, it has become evident that spatial problems can no longer be resolved in isolation, but should be solved in conjunction with other development-related issues. Interest in integrated area development is growing, and a more integrated planning approach is desired. In this design-based

Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

Science.gov (United States)

Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

Conceptual design for the next JAEA's enterprise resource planning system

International Nuclear Information System (INIS)

Kimura, Hideo; Aoyagi, Tetsuo; Sakai, Manabu; Sato, Taiichi; Tsuji, Minoru

2008-11-01

JAEA developed the ERP (Enterprise Resource Planning) system at the establishment in 2005, aiming to support and enhance its business-critical task such as financial accounting and contract management. We considered the conceptual design of the next ERP system, and we implemented the prototype system to validate its effectiveness. Moreover, we implemented the simple add-on tool for rapid and easy development. At the result, we gauged the future prospects that the XML-centric system which we designed will offer high modularity, flexibility, connectivity between other systems, independence among subsystems. The simple add-on tool also demonstrated its effectiveness. (author)

Climate Change, Coastal Vulnerability and the Need for Adaptation Alternatives: Planning and Design Examples from Egypt and the USA

Directory of Open Access Journals (Sweden)

S Jeffress Williams

2015-07-01

Full Text Available Planning and design of coastal protection for high-risk events with low to moderate or uncertain probabilities are a challenging balance of short- and long-term cost vs. protection of lives and infrastructure. The pervasive, complex, and accelerating impacts of climate change on coastal areas, including sea-level rise, storm surge and tidal flooding, require full integration of the latest science into strategic plans and engineering designs. While the impacts of changes occurring are global, local effects are highly variable and often greatly exacerbated by geophysical (land subsidence, faulting, oceanographic (ocean circulation, wind patterns and anthropogenic factors. Reducing carbon emissions is needed to mitigate global warming, but adaptation can accommodate at least near future change impacts. Adaptation should include alternatives that best match region-specific risk, time frame, environmental conditions, and the desired protection. Optimal alternatives are ones that provide protection, accommodate or mimic natural coastal processes, and include landforms such as barrier islands and wetlands. Plans are often for 50 years, but longer-term planning is recommended since risk from climate change will persist for centuries. This paper presents an assessment of impacts of accelerating climate change on the adequacy of coastal protection strategies and explores design measures needed for an optimum degree of protection and risk reduction. Three coastal areas facing similar challenges are discussed: Abu-Qir Bay, Nile River delta plain, Egypt; Lake Borgne, New Orleans, Louisiana delta plain; and the New York City region.

Imaging, virtual planning, design, and production of patient-specific implants and clinical validation in craniomaxillofacial surgery.

Science.gov (United States)

Dérand, Per; Rännar, Lars-Erik; Hirsch, Jan-M

2012-09-01

The purpose of this article was to describe the workflow from imaging, via virtual design, to manufacturing of patient-specific titanium reconstruction plates, cutting guide and mesh, and its utility in connection with surgical treatment of acquired bone defects in the mandible using additive manufacturing by electron beam melting (EBM). Based on computed tomography scans, polygon skulls were created. Following that virtual treatment plans entailing free microvascular transfer of fibula flaps using patient-specific reconstruction plates, mesh, and cutting guides were designed. The design was based on the specification of a Compact UniLOCK 2.4 Large (Synthes(®), Switzerland). The obtained polygon plates were bent virtually round the reconstructed mandibles. Next, the resections of the mandibles were planned virtually. A cutting guide was outlined to facilitate resection, as well as plates and titanium mesh for insertion of bone or bone substitutes. Polygon plates and meshes were converted to stereolithography format and used in the software Magics for preparation of input files for the successive step, additive manufacturing. EBM was used to manufacture the customized implants in a biocompatible titanium grade, Ti6Al4V ELI. The implants and the cutting guide were cleaned and sterilized, then transferred to the operating theater, and applied during surgery. Commercially available software programs are sufficient in order to virtually plan for production of patient-specific implants. Furthermore, EBM-produced implants are fully usable under clinical conditions in reconstruction of acquired defects in the mandible. A good compliance between the treatment plan and the fit was demonstrated during operation. Within the constraints of this article, the authors describe a workflow for production of patient-specific implants, using EBM manufacturing. Titanium cutting guides, reconstruction plates for fixation of microvascular transfer of osteomyocutaneous bone grafts, and

78 FR 40015 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2013-07-03

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants; District of Columbia; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator Units AGENCY: Environmental... negative declaration for hospital/medical/infectious waste incinerator (HMIWI) units within the District of...

Generic procedure for designing and implementing plan management systems for space science missions operations

Science.gov (United States)

Chaizy, P. A.; Dimbylow, T. G.; Allan, P. M.; Hapgood, M. A.

2011-09-01

This paper is one of the components of a larger framework of activities whose purpose is to improve the performance and productivity of space mission systems, i.e. to increase both what can be achieved and the cost effectiveness of this achievement. Some of these activities introduced the concept of Functional Architecture Module (FAM); FAMs are basic blocks used to build the functional architecture of Plan Management Systems (PMS). They also highlighted the need to involve Science Operations Planning Expertise (SOPE) during the Mission Design Phase (MDP) in order to design and implement efficiently operation planning systems. We define SOPE as the expertise held by people who have both theoretical and practical experience in operations planning, in general, and in space science operations planning in particular. Using ESA's methodology for studying and selecting science missions we also define the MDP as the combination of the Mission Assessment and Mission Definition Phases. However, there is no generic procedure on how to use FAMs efficiently and systematically, for each new mission, in order to analyse the cost and feasibility of new missions as well as to optimise the functional design of new PMS; the purpose of such a procedure is to build more rapidly and cheaply such PMS as well as to make the latter more reliable and cheaper to run. This is why the purpose of this paper is to provide an embryo of such a generic procedure and to show that the latter needs to be applied by people with SOPE during the MDP. The procedure described here proposes some initial guidelines to identify both the various possible high level functional scenarii, for a given set of possible requirements, and the information that needs to be associated with each scenario. It also introduces the concept of catalogue of generic functional scenarii of PMS for space science missions. The information associated with each catalogued scenarii will have been identified by the above procedure and

Emergency planning simplification: Why ALWR designs shall support this goal

International Nuclear Information System (INIS)

Tripputi, I.

2004-01-01

Emergency Plan simplification, could be achieved only if it can proved, in a context of balanced national health protection policies, that there is a reduced or no technical need for some elements of it and that public protection is assured in all considered situations regardless of protective actions outside the plant. These objectives may be technically supported if one or more of the following conditions are complied with: 1. Accidents potentially releasing large amounts of fission products can be ruled out by characteristics of the designs 2. Plant engineered features (and the containment system in particular) are able to drastically mitigate the radioactive releases under all conceivable scenarios. 3. A realistic approach to the consequence evaluation can reduce the expected consequences to effects below any concern. Unfortunately no one single approach is either technically feasible or justified in a perspective of defense in depth and only a mix of them may provide the necessary conditions. It appears that most or all proposed ALWR designs address the technical issues, whose solutions are the bases to eliminate the need for a number of protective actions (evacuation, relocation, sheltering, iodine tablets administration, etc.) even in the case of a severe accident. Some designs are mainly oriented to prevent the need for short term protective actions; they credit simplified Emergency Plans or the capabilities of existing civil protection organizations for public relocation in the long term, if needed. Others take also into account the overall releases to exclude or minimize public relocation and land contamination. Design targets for population individual doses and for land contamination proposed in Italy are discussed in the paper. It is also shown that these limits, while challenging, appear to be within the reach of the next generation proposed designs currently studied in Italy. (author)

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

Science.gov (United States)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

Engineering design and test plan for demonstrating DETOX treatment of mixed wastes

International Nuclear Information System (INIS)

Goldblatt, S.; Dhooge, P.

1995-01-01

DETOX is a cocatalyzed wet oxidation process in which the catalysts are a relatively great concentration of iron ions (typically as iron(III) chloride) in the presence of small amounts of platinum and ruthenium ions. Organic compounds are oxidized completely to carbon dioxide, water, and (if chlorinated) hydrogen chloride. The process has shown promise as a non-thermal alternative to incineration for treatment and/or volume reduction of hazardous, radioactive, and mixed wastes. Design and fabrication of a demonstration unit capable of destroying 25. Kg/hr of organic material is now in progress. This paper describes the Title 2 design of the demonstration unit, and the planned demonstration effort at Savannah River Site (SRS) and Weldon Spring Site Remedial Action Project (WSSRAP)

Designing a two-rank acceptance sampling plan for quality inspection of geospatial data products

Science.gov (United States)

Tong, Xiaohua; Wang, Zhenhua; Xie, Huan; Liang, Dan; Jiang, Zuoqin; Li, Jinchao; Li, Jun

2011-10-01

To address the disadvantages of classical sampling plans designed for traditional industrial products, we originally propose a two-rank acceptance sampling plan (TRASP) for the inspection of geospatial data outputs based on the acceptance quality level (AQL). The first rank sampling plan is to inspect the lot consisting of map sheets, and the second is to inspect the lot consisting of features in an individual map sheet. The TRASP design is formulated as an optimization problem with respect to sample size and acceptance number, which covers two lot size cases. The first case is for a small lot size with nonconformities being modeled by a hypergeometric distribution function, and the second is for a larger lot size with nonconformities being modeled by a Poisson distribution function. The proposed TRASP is illustrated through two empirical case studies. Our analysis demonstrates that: (1) the proposed TRASP provides a general approach for quality inspection of geospatial data outputs consisting of non-uniform items and (2) the proposed acceptance sampling plan based on TRASP performs better than other classical sampling plans. It overcomes the drawbacks of percent sampling, i.e., "strictness for large lot size, toleration for small lot size," and those of a national standard used specifically for industrial outputs, i.e., "lots with different sizes corresponding to the same sampling plan."

Establishing a method for the design and maintenance of emergency evacuation plans based on the computer aided facility management (CAFM) at DESY

International Nuclear Information System (INIS)

Eucker, S.

2005-12-01

The present thesis describes a procedure for the design and maintenance of evacuation and rescue plans in a CAMF environment at the German Electron Synchrotron (DESY). The procedure is developed as business-process model and vizualized by the Unified Modelling Language (UML). The design of the evacuation and rescue plans and the technical design with a CAD software are presented. The introduction of the procedure pursues by the exemplary providing of a building with evacuation and rescue plans, Additionally safety informations of the evacuation and rescue plans are provided via the DESY Intranet. The termination of this thesis is the summarizing of the results and the experiences of the project as well as an outlook about future developments at DESY

75 FR 78952 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2010-12-17

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants; Commonwealth of Virginia; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator (HMIWI) Units, Negative... Quality, 629 East Main Street, Richmond, Virginia 23219. FOR FURTHER INFORMATION CONTACT: James B. Topsale...

75 FR 78916 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2010-12-17

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants, Commonwealth of Virginia; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator (HMIWI) Units, Negative... 19103. Copies of the State submittal are available at the Virginia Department of Environmental Quality...

78 FR 40087 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2013-07-03

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants; District of Columbia; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator Units AGENCY: Environmental...) section 111(d)/129 negative declaration for the District of Columbia for hospital/medical/infectious waste...

Play for All Guidelines: Planning, Design and Management of Outdoor Play Settings for All Children. Second Edition.

Science.gov (United States)

Moore, Robin C., Ed.; Goltsman, Susan M., Ed.; Iacofano, Daniel S., Ed.

These guidelines assist professional designers, park and recreation managers, and community groups when making decisions about the planning, design, and ongoing management of children's public play environments. The guidelines are updated to meet or exceed the requirements of the Americans with Disabilities Act Guidelines (July 26, 1991) and the…

Designing a Strategic Plan through an Emerging Knowledge Generation Process: The ATM Experience

Science.gov (United States)

Zanotti, Francesco

2012-01-01

Purpose: The aim of this contribution is to describe a new methodology for designing strategic plans and how it was implemented by ATM, a public transportation agency based in Milan, Italy. Design/methodology/approach: This methodology is founded on a new system theory, called "quantum systemics". It is based on models and metaphors both…

75 FR 73996 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2010-11-30

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants; State of Delaware; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator (HMIWI) Units, Negative Declaration... Resources and Environmental Control, 89 Kings Highway, P.O. Box 1401, Dover, Delaware 19903. FOR FURTHER...

[Application of digital design of orthodontic-prosthodontic multidisciplinary treatment plan in esthetic rehabilitation of anterior teeth].

Science.gov (United States)

Liu, Y S; Li, Z; Zhao, Y J; Ye, H Q; Zhou, Y Q; Hu, W J; Liu, Y S; Xun, C L; Zhou, Y S

2018-02-18

To develop a digital workflow of orthodontic-prosthodontic multidisciplinary treatment plan which can be applied in complicated anterior teeth esthetic rehabilitation, in order to enhance the efficiency of communication between dentists and patients, and improve the predictability of treatment outcome. Twenty patients with the potential needs of orthodontic-prosthodontic multidisciplinary treatment to solve their complicated esthetic problems in anterior teeth were recruited in this study. Digital models of patients' both dental arches and soft tissues were captured using intra oral scanner. Direct prosthodontic (DP) treatment plan and orthodontic-prosthodontic (OP) treatment plan were carried out for each patient. For DP treatment plans, digital wax-up models were directly designed on original digital models using prosthodontic design system. For OP treatment plans, virtual-setups were performed using orthodontic analyze system according to orthodontic and esthetic criteria and imported to prosthodontic design system to finalize the digital wax-up models. These two treatment plans were shown to the patients and demonstrated elaborately. Each patient rated two treatment plans using visual analogue scales and the medians of scores of two treatment plans were analyzed using signed Wilcoxon test. Having taken into consideration various related factors, including time, costs of treatment, each patient chose a specific treatment plan. For the patients chose DP treatment plans, digital wax-up models were exported and printed into resin diagnostic models which would be utilized in the prosthodontic treatment process. For the patients chose OP treatment plans, virtual-setups were used to fabricate aligners or indirect bonding templates and digital wax-up models were also exported and printed into resin diagnostic models for prosthodontic treatment after orthodontic treatment completed. The medians of scores of DP treatment plan and OP treatment plan were calculated and

Remedial design work plan for the Lower East Fork Poplar Creek Operable Unit, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

1996-02-01

The Remedial Design Work Plan (RDWP) for the Lower East Fork Poplar Creek (EFPC) Operable Unit (OU) in Oak Ridge, Tennessee, has been prepared. The remedial investigation determined that the principal contaminant is mercury, which originated from releases during Y-12 Plant operations, primarily between 1953 and 1963. The recommended alternative, as stated in the Record of Decision (ROD) was to excavate and dispose of floodplain soils contaminated with mercury above the remedial goal option. Thereafter, a public hearing was held to review the proposed plan. Comments were incorporated. The revised selected remedy, per the ROD is to excavate and dispose of floodplain soils contaminated above the remediation goal of 400 parts per million mercury. The approved ROD with this goal will be the basis for remedial design (RD). The RD work plan (RDWP) is composed of six chapters. An introductory chapter describes the purpose and scope of the RDWP, the selected remedy as identified by the ROD; the roles and responsibilities of the RD team members, and the site background information, including site history, contaminants of concern, and site characteristics. Chapter 2 contains the design objectives, RD approach, regulatory considerations during RD, and the design criteria with assumptions. Chapter 3 presents the RD planning process to prepare this RDWP, as well as secondary RD support plans. Chapter 4 describes the scope of the RD activities in more detail and identifies what will be included in the design package. Chapter 5 presents the schedule for performance of the RD activities, identifying key RD milestones. Specific documents used in the preparation of this document are referenced in Chapter 6

75 FR 73967 - Approval and Promulgation of State Air Quality Plans for Designated Facilities and Pollutants...

Science.gov (United States)

2010-11-30

... Promulgation of State Air Quality Plans for Designated Facilities and Pollutants, State of Delaware; Control of Emissions From Existing Hospital/Medical/Infectious Waste Incinerator (HMIWI) Units, Negative Declaration... Environmental Control, 89 Kings Highway, P.O. Box 1401, Dover, Delaware 19903. FOR FURTHER INFORMATION CONTACT...

T Tank Farm Interim Cover Test - Design Plan

International Nuclear Information System (INIS)

Zhang, Z. F.; Keller, Jason M.

2006-01-01

The Hanford Site has 149 underground single-shell tanks that store hazardous radioactive waste. Many of these tanks and their associated infrastructure (e.g., pipelines, diversion boxes) have leaked. Some of the leaked waste has entered the groundwater. The largest known leak occurred from the T-106 Tank in 1973. Many of the contaminants from that leak still reside within the vadose zone beneath the T Tank Farm. CH2M Hill Hanford Group, Inc. seeks to minimize movement of this residual contaminant plume by placing an interim cover on the surface. Such a cover is expected to prevent infiltrating water from reaching the plume and moving it further. Pacific Northwest National Laboratory has prepared a design plan to monitor and determine the effectiveness of the interim cover. A three-dimensional numerical simulation of water movement beneath a cover was conducted to guide the design of the plan. Soil water content, water pressure, and temperature will be monitored using off-the-shelf equipment that can be installed by the hydraulic hammer technique. In fiscal year 2006, two instrument nests will be installed, one inside and one outside of the proposed cover. In fiscal year 2007, two additional instrument nests, both inside the proposed cover, will be installed. Each instrument nest contains a neutron access tube and a capacitance probe (to measure water content), and four heat-dissipation units (to measure pressure head and temperature). A datalogger and a meteorological station will be installed outside of the fence. Two drain gauges will be installed in locations inside and outside the cover for the purpose of measuring soil water flux.

Planning Considerations for a Mars Sample Receiving Facility: Summary and Interpretation of Three Design Studies

Science.gov (United States)

Beaty, David W.; Allen, Carlton C.; Bass, Deborah S.; Buxbaum, Karen L.; Campbell, James K.; Lindstrom, David J.; Miller, Sylvia L.; Papanastassiou, Dimitri A.

2009-10-01

It has been widely understood for many years that an essential component of a Mars Sample Return mission is a Sample Receiving Facility (SRF). The purpose of such a facility would be to take delivery of the flight hardware that lands on Earth, open the spacecraft and extract the sample container and samples, and conduct an agreed-upon test protocol, while ensuring strict containment and contamination control of the samples while in the SRF. Any samples that are found to be non-hazardous (or are rendered non-hazardous by sterilization) would then be transferred to long-term curation. Although the general concept of an SRF is relatively straightforward, there has been considerable discussion about implementation planning. The Mars Exploration Program carried out an analysis of the attributes of an SRF to establish its scope, including minimum size and functionality, budgetary requirements (capital cost, operating costs, cost profile), and development schedule. The approach was to arrange for three independent design studies, each led by an architectural design firm, and compare the results. While there were many design elements in common identified by each study team, there were significant differences in the way human operators were to interact with the systems. In aggregate, the design studies provided insight into the attributes of a future SRF and the complex factors to consider for future programmatic planning.

Phase Transitions in Planning Problems: Design and Analysis of Parameterized Families of Hard Planning Problems

Science.gov (United States)

Hen, Itay; Rieffel, Eleanor G.; Do, Minh; Venturelli, Davide

2014-01-01

There are two common ways to evaluate algorithms: performance on benchmark problems derived from real applications and analysis of performance on parametrized families of problems. The two approaches complement each other, each having its advantages and disadvantages. The planning community has concentrated on the first approach, with few ways of generating parametrized families of hard problems known prior to this work. Our group's main interest is in comparing approaches to solving planning problems using a novel type of computational device - a quantum annealer - to existing state-of-the-art planning algorithms. Because only small-scale quantum annealers are available, we must compare on small problem sizes. Small problems are primarily useful for comparison only if they are instances of parametrized families of problems for which scaling analysis can be done. In this technical report, we discuss our approach to the generation of hard planning problems from classes of well-studied NP-complete problems that map naturally to planning problems or to aspects of planning problems that many practical planning problems share. These problem classes exhibit a phase transition between easy-to-solve and easy-to-show-unsolvable planning problems. The parametrized families of hard planning problems lie at the phase transition. The exponential scaling of hardness with problem size is apparent in these families even at very small problem sizes, thus enabling us to characterize even very small problems as hard. The families we developed will prove generally useful to the planning community in analyzing the performance of planning algorithms, providing a complementary approach to existing evaluation methods. We illustrate the hardness of these problems and their scaling with results on four state-of-the-art planners, observing significant differences between these planners on these problem families. Finally, we describe two general, and quite different, mappings of planning

CLIMATE, CITIES AND SUSTAINABILITY IN THE ARABIAN REGION: COMPACTNESS AS A NEW PARADIGM IN URBAN DESIGN AND PLANNING

Directory of Open Access Journals (Sweden)

Mustapha Ben Hamouche

2008-07-01

Full Text Available Over centuries, the climate in Arabia has become a major factor that shaped daylife of the local societies and thus, the form of their cities. Old cities were charactrized by their compactness which stemmed from the need for protection from the harsh environment. Urban fabric has been dominated by the building masses, the limited number of enclosed public and outdoor spaces, and the inward-looking architecture. Besides its environmental utility, compactness also provided a physical support to the local community and reflected its strong social structure and complex network of kinships. Nowadays, Gulf cities that are mostly shaped by the modern movement and American life style are in complete negation with their past. An unprecedented sprawl effect is taking place all over the Gulf countries due to the heavy reliance on private transportation, high building technology, powerful air-conditioning systems and private housing. Reconsidering compactness in the present urban planning and design practices, would not only insure a cultural continuity with the rooted urban history of the region, but also meets the recommendations of the recent findings in research on sustainable urban development. Modeling compactness from the study of the old cities into urban indicators and design guidelines would provide an alternative design and planning process to architects, planners and decisionmakers. Far from being exhaustive, the study consists of analyzing some old cities that are located in the hot regions, according to the available documents, and extracting urban indicators that help measuring and applying compactness in planning and design.

The manual of a computer software 'FBR Plant Planning Design Prototype System'

International Nuclear Information System (INIS)

2003-10-01

This is a manual of a computer software 'FBR Plant Planning Design Prototype System', which enables users to conduct case studies of deviated FBR design concepts based on 'MONJU'. The calculations simply proceed as the user clicks displayed buttons, therefore step-by-step explanation is supposed not be necessary. The following pages introduce only particular features of this software, i.e, each interactive screens, functions of buttons and consequences after clicks, and the quitting procedure. (author)

Optimizing digital elevation models (DEMs) accuracy for planning and design of mobile communication networks

Science.gov (United States)

Hassan, Mahmoud A.

2004-02-01

Digital elevation models (DEMs) are important tools in the planning, design and maintenance of mobile communication networks. This research paper proposes a method for generating high accuracy DEMs based on SPOT satellite 1A stereo pair images, ground control points (GCP) and Erdas OrthoBASE Pro image processing software. DEMs with 0.2911 m mean error were achieved for the hilly and heavily populated city of Amman. The generated DEM was used to design a mobile communication network resulted in a minimum number of radio base transceiver stations, maximum number of covered regions and less than 2% of dead zones.

Design and evaluation of a software prototype for participatory planning of environmental adaptations.

Science.gov (United States)

Eriksson, J; Ek, A; Johansson, G

2000-03-01

A software prototype to support the planning process for adapting home and work environments for people with physical disabilities was designed and later evaluated. The prototype exploits low-cost three-dimensional (3-D) graphics products in the home computer market. The essential features of the prototype are: interactive rendering with optional hardware acceleration, interactive walk-throughs, direct manipulation tools for moving objects and measuring distances, and import of 3-D-objects from a library. A usability study was conducted, consisting of two test sessions (three weeks apart) and a final interview. The prototype was then tested and evaluated by representatives of future users: five occupational therapist students, and four persons with physical disability, with no previous experience of the prototype. Emphasis in the usability study was placed on the prototype's efficiency and learnability. We found that it is possible to realise a planning tool for environmental adaptations, both regarding usability and technical efficiency. The usability evaluation confirms our findings from previous case studies, regarding the relevance and positive attitude towards this kind of planning tool. Although the prototype was found to be satisfactorily efficient for the basic tasks, the paper presents several suggestions for improvement of future prototype versions.

Application of objective provision tree to development of standard review plan for sodium-cooled fast reactor nuclear design

Energy Technology Data Exchange (ETDEWEB)

Bae, Moo-Hoon; Suh, Namduk; Choi, Yongwon; Shin, Andong [Korea Institute of Nuclear Safety, Daejon (Korea, Republic of)

2016-06-15

A systematic methodology was developed for the standard review plan for sodium-cooled fast reactor nuclear design. The process is first to develop an objective provision tree of sodium-cooled fast reactor for the reactivity control safety function. The provision tree is generally developed by designer to confirm whether the design satisfies the defense-in-depth concept. Then applicability of the current standard review plan of nuclear design for light water reactor to sodium-cooled fast reactor was evaluated and complemented by the developed objective provision tree.

Design and Implementation of Regional and Communal Energy Plans

International Nuclear Information System (INIS)

Jilek, W.

1997-01-01

Local energy planning has become a common thing, particularly after the first oil shock in the year 1973. This kind of planning claims to follow an integrated approach, i.e. to treat not only the economic problems connected with the supply of energy, but also the environmental problems concerned and the questions related to the conservation of resources. In Styria, such ''integrated'' plans have emerged in more than 25 municipalities, so far. Most of these concepts - harmonized with the clearly defined goals and objectives of the province's energy and environmental policy - may be termed a success insofar, as the measures considered therein are already in the process of practical implementation. (author)

Nez Perce Tribal Hatchery Project; Operations and Maintenance and Planning and Design, 2002 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Larson, Roy Edward; Walker, Grant W.; Penney, Aaron K. (Nez Perce Tribe, Lapwai, ID)

2005-12-01

This report fulfills the contract obligations based on the Statement of Work (SOW) for the project as contracted with Bonneville Power Administration (BPA). Nez Perce Tribal Hatchery (NPTH) Year-2002 annual report combines information from two contracts with a combined value of $3,036,014. Bonneville Power Administration identifies them as follows; (1) Part I--Operations and Maintenance--Project No. 1983-350-00, Contract No. 4504, and $2,682,635 which includes--Equipment costs of $1,807,105. (2) Part II--Planning and Design--Project No. 1983-35-04, Contract No. 4035, $352,379 for Clearwater Coho Restoration Master Plan development Based on NPPC authorization for construction and operation of NPTH, the annual contracts were negotiated for the amounts shown above under (1) and (2). Construction contracts were handled by BPA until all facilities are completed and accepted.

78 FR 72036 - Approval and Promulgation of Implementation Plans and Designation of Areas for Air Quality...

Science.gov (United States)

2013-12-02

... maintenance plan to the year 2025 and updating the sub-area motor vehicle emission budgets (MVEBs) for... taking? III. Why is EPA taking these actions? IV. What are the effects of these actions? V. Final Action... design values Location County Monitor ID 2008 2009 2010 2008-2010 Lincoln County Replacing Iron Station...

Five features of value-based insurance design plans were associated with higher rates of medication adherence.

Science.gov (United States)

Choudhry, Niteesh K; Fischer, Michael A; Smith, Benjamin F; Brill, Gregory; Girdish, Charmaine; Matlin, Olga S; Brennan, Troyen A; Avorn, Jerry; Shrank, William H

2014-03-01

Value-based insurance design (VBID) plans selectively lower cost sharing to increase medication adherence. Existing plans have been structured in a variety of ways, and these variations could influence the effectiveness of VBID plans. We evaluated seventy-six plans introduced by a large pharmacy benefit manager during 2007-10. We found that after we adjusted for the other features and baseline trends, VBID plans that were more generous, targeted high-risk patients, offered wellness programs, did not offer disease management programs, and made the benefit available only for medication ordered by mail had a significantly greater impact on adherence than plans without these features. The effects were as large as 4-5 percentage points. These findings can provide guidance for the structure of future VBID plans.

GIS-assisted spatial analysis for urban regulatory detailed planning: designer's dimension in the Chinese code system

Science.gov (United States)

Yu, Yang; Zeng, Zheng

2009-10-01

By discussing the causes behind the high amendments ratio in the implementation of urban regulatory detailed plans in China despite its law-ensured status, the study aims to reconcile conflict between the legal authority of regulatory detailed planning and the insufficient scientific support in its decision-making and compilation by introducing into the process spatial analysis based on GIS technology and 3D modeling thus present a more scientific and flexible approach to regulatory detailed planning in China. The study first points out that the current compilation process of urban regulatory detailed plan in China employs mainly an empirical approach which renders it constantly subjected to amendments; the study then discusses the need and current utilization of GIS in the Chinese system and proposes the framework of a GIS-assisted 3D spatial analysis process from the designer's perspective which can be regarded as an alternating processes between the descriptive codes and physical design in the compilation of regulatory detailed planning. With a case study of the processes and results from the application of the framework, the paper concludes that the proposed framework can be an effective instrument which provides more rationality, flexibility and thus more efficiency to the compilation and decision-making process of urban regulatory detailed plan in China.

Review: Improving the Impact of Plant Science on Urban Planning and Design

Directory of Open Access Journals (Sweden)

Peter C. Wootton-Beard

2016-11-01

Full Text Available Urban planning is a vital process in determining the functionality of future cities. It is predicted that at least two thirds of the world’s citizens will reside in towns and cities by the middle of this century, up from one third in the middle of the previous century. Not only is it essential to provide space for work and dwelling, but also for their well-being. Well-being is inextricably linked with the surrounding environment, and natural landscapes have a potent positive effect. For this reason, the inclusion and management of urban green infrastructure has become a topic of increasing scientific interest. Elements of this infrastructure, including green roofs and façades are of growing importance to operators in each stage of the planning, design and construction process in urban areas. Currently, there is a strong recognition that “green is good”. Despite the positive recognition of urban greenery, and the concerted efforts to include more of it in cities, greater scientific attention is needed to better understand its role in the urban environment. For example, many solutions are cleverly engineered without giving sufficient consideration to the biology of the vegetation that is used. This review contends that whilst “green is good” is a positive mantra to promote the inclusion of urban greenery, there is a significant opportunity to increase the contribution of plant science to the process of urban planning through both green infrastructure, and biomimicry.

SU-E-T-240: Design and Implement of An Electronic Records Function for Treatment Plan Checked Meeting

International Nuclear Information System (INIS)

Wu, Q

2015-01-01

Purpose: To replace the paper records, we designed an electronic records function for plan checked meeting in our in-house developed radiotherapy information management system(RTIMS). Methods: Since 2007, the RTIMS has been developed on a database and web service of Apache+PHP+MySQL, and almost all computers and smartphones could access the RTIMS through IE browser, to input, search, count, and print the data. In 2012, we also established an radiation therapy case conference multi-media system(RTCCMMS) based on Windows Remote Desktop feature. Since 2013, we have carried out the treatment plan checked meeting of the physics division in every afternoon for about half an hour. In 2014, we designed an electronic records function, which includes a meeting information record and a checked plan record. And the meeting record includes the following items: meeting date, name, place, length, status, attendee, content, etc. The plan record includes the followings: meeting date, meeting name, patient ID, gender, age, patient name, course, plan, purpose, position, technique, CTsim type, plan type, primary doctor, other doctor, primary physicist, other physicist, difficulty, quality, score, opinion, status, note, etc. Results: In the past year, the electronic meeting records function has been successfully developed and implemented in the division, and it could be accessed from an smartphone. Almost all items have the corresponding pull-down menu selection, and each option would try to intelligently inherit default value from the former record or other form. According to the items, we could do big data mining to the input data. It also has both Chinese and English two versions. Conclusion: It was demonstrated to be user-friendly and was proven to significantly improve the clinical efficiency and quality of treatment plan. Since the RTIMS is an in-house developed system, more functions can be added or modified to further enhance its potentials in research and clinical practice

SU-E-T-240: Design and Implement of An Electronic Records Function for Treatment Plan Checked Meeting

Energy Technology Data Exchange (ETDEWEB)

Wu, Q [Beijing Hospital, Beijing (China)

2015-06-15

Purpose: To replace the paper records, we designed an electronic records function for plan checked meeting in our in-house developed radiotherapy information management system(RTIMS). Methods: Since 2007, the RTIMS has been developed on a database and web service of Apache+PHP+MySQL, and almost all computers and smartphones could access the RTIMS through IE browser, to input, search, count, and print the data. In 2012, we also established an radiation therapy case conference multi-media system(RTCCMMS) based on Windows Remote Desktop feature. Since 2013, we have carried out the treatment plan checked meeting of the physics division in every afternoon for about half an hour. In 2014, we designed an electronic records function, which includes a meeting information record and a checked plan record. And the meeting record includes the following items: meeting date, name, place, length, status, attendee, content, etc. The plan record includes the followings: meeting date, meeting name, patient ID, gender, age, patient name, course, plan, purpose, position, technique, CTsim type, plan type, primary doctor, other doctor, primary physicist, other physicist, difficulty, quality, score, opinion, status, note, etc. Results: In the past year, the electronic meeting records function has been successfully developed and implemented in the division, and it could be accessed from an smartphone. Almost all items have the corresponding pull-down menu selection, and each option would try to intelligently inherit default value from the former record or other form. According to the items, we could do big data mining to the input data. It also has both Chinese and English two versions. Conclusion: It was demonstrated to be user-friendly and was proven to significantly improve the clinical efficiency and quality of treatment plan. Since the RTIMS is an in-house developed system, more functions can be added or modified to further enhance its potentials in research and clinical practice

78 FR 34918 - Direct Final Approval of Sewage Sludge Incinerators State Plan for Designated Facilities and...

Science.gov (United States)

2013-06-11

... Approval of Sewage Sludge Incinerators State Plan for Designated Facilities and Pollutants; Indiana AGENCY... to control air pollutants from ``Sewage Sludge Incinerators'' (SSI). The Indiana Department of... unit,'' in part, as any device that combusts sewage sludge for the purpose of reducing the volume of...

Advanced safeguards research and development plan with an emphasis on its impact on nuclear power-plant design

International Nuclear Information System (INIS)

Tobin, S.J.; Demuth, S.F.; Miller, M.C.; Swinhoe, M.T.; Thomas, K.E.

2007-01-01

One tool for reducing the concern of nuclear proliferation is enhanced safeguards. Present safeguards have evolved over the past 40 years, and future safeguards will grow from this strong base to implement new technologies for improving our ability to quantify nuclear material. This paper will give an overview of the advanced technology research and development plan for safeguarding. One of the research facilities planned by the Department of Energy is the Advanced Fuel Cycle Facility (AFCF), to develop a novel nuclear fuel recycling program. Since the Advanced Fuel Cycle Facility will receive and reprocess spent fuel and will fabricate fast-reactor fuel, a wide breadth of safeguards technologies is involved. A fundamental concept in safeguards is material control and accounting (MCA). 4 topics concerning MCA and requiring further research have been identified: 1) measuring spent fuel, 2) measuring the plutonium content in the electro-refiner with pyro-processing, 3) measuring plutonium in the presence of other actinides, and 4) measuring neptunium and americium in the presence of other actinides. As for the long-term research and development plan for the AFCF, it will include improving MCA techniques as well as introducing new techniques that are not related to MCA, for example, enhanced containment and surveillance, or enhanced process monitoring. The top priority will stay quantifying the plutonium as accurately as possible and to reach this purpose 4 relevant technologies have been identified: 1) the microcalorimeter, 2) the passive neutron-albedo reactivity, 3) list-mode data acquisition, and 4) a liquid-scintillator multiplicity counter. Incorporating safeguards into the initial design of AFCF (safeguards by design) is a central concept. As the technology research and development plan for the Advanced Fuel Cycle Facility is examined, particular attention will be given to safeguards technologies that may affect the physical design of nuclear power plants

Water-related planning and design at energy firms

International Nuclear Information System (INIS)

Abbey, D.; Lucero, F.

1980-11-01

Water related planning and design at energy firms are examined. By identifying production alternatives and specifying the cost of these alternatives under a variety of conditions, one gains insight into the future pattern of water use in the energy industry and the response of industry to water-related regulation. In Part II, the three principal decisions of industry that affect water allocation are reviewed: where to build plants, where to get water, and how much water to use. The cost of water use alternatives is reviewed. Part III presents empirical data to substantiate the inferences derived from engineering/economic analysis. The source of water, type of cooling system, and pattern of discharge for electric plants constructed during the 1970s or projected to come on line in this decade are reported. In the 1970s in the US, there was a trend away from once-through cooling toward use of evaporative cooling. Freshwater, as a source of supply, and discharge of effluent were standard practice. In the 1980s, almost all new capacity in the states and basins surveyed will use evaporative cooling. It is pointed out that a thorough understanding of industrial water use economics and water markets is a precursor to successful regulation

Design of emergency plans due to the failure risk of hydraulic works - Theory and case study

International Nuclear Information System (INIS)

Ochoa Rivera, Juan Camilo

2006-01-01

Dams are built to be highly safe hydraulic works. Nevertheless, they are not exempt from a certain failure risk, which turns in a variable value along the time service of the dam. As the mentioned dam-failure risk can be a significant hazard, analysis on dam-break is becoming important, as same as the assessment of its consequences. This type of studies are intended to reduce the costs linked to dam-failure, which are mainly due to the losses of human beings and material goods. A suitable way to minimize such losses consists of designing emergency plans, which permit to prepare and implant appropriate protection measures. A methodological framework to carry out this kind of emergency plans is introduced in this paper, accompanied by a case study corresponding to an emergency plan of a Spanish dam

Model Commissioning Plan and Guide Specifications

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

The objectives of Model Commissioning Plan and Guide Specifications are to ensure that the design team applies commissioning concepts to the design and prepares commissioning specifications and a commission plan for inclusion in the bid construction documents.

Design review plan for Multi-Function Waste Tank Facility (Project W-236A)

International Nuclear Information System (INIS)

Renfro, G.G.

1994-01-01

This plan describes how the Multi-Function Waste Tank Facility (MWTF) Project conducts reviews of design media; describes actions required by Project participants; and provides the methodology to ensure that the design is complete, meets the technical baseline of the Project, is operable and maintainable, and is constructable. Project W-236A is an integrated project wherein the relationship between the operating contractor and architect-engineer is somewhat different than that of a conventional project. Working together, Westinghouse Hanford Company (WHC) and ICF Karser Hanford (ICF KH) have developed a relationship whereby ICF KH performs extensive design reviews and design verification. WHC actively participates in over-the-shoulder reviews during design development, performs a final review of the completed design, and conducts a formal design review of the Safety Class I, ASME boiler and Pressure Vessel Code items in accordance with WHC-CM-6-1, Standard Engineering Practices

Translating research into practice through user-centered design: An application for osteoarthritis healthcare planning.

Science.gov (United States)

Carr, Eloise Cj; Babione, Julie N; Marshall, Deborah

2017-08-01

To identify the needs and requirements of the end users, to inform the development of a user-interface to translate an existing evidence-based decision support tool into a practical and usable interface for health service planning for osteoarthritis (OA) care. We used a user-centered design (UCD) approach that emphasized the role of the end-users and is well-suited to knowledge translation (KT). The first phase used a needs assessment focus group (n=8) and interviews (n=5) with target users (health care planners) within a provincial health care organization. The second phase used a participatory design approach, with two small group sessions (n=6) to explore workflow, thought processes, and needs of intended users. The needs assessment identified five design recommendations: ensuring the user-interface supports the target user group, allowing for user-directed data explorations, input parameter flexibility, clear presentation, and provision of relevant definitions. The second phase identified workflow insights from a proposed scenario. Graphs, the need for a visual overview of the data, and interactivity were key considerations to aid in meaningful use of the model and knowledge translation. A UCD approach is well suited to identify health care planners' requirements when using a decision support tool to improve health service planning and management of OA. We believe this is one of the first applications to be used in planning for health service delivery. We identified specific design recommendations that will increase user acceptability and uptake of the user-interface and underlying decision support tool in practice. Our approach demonstrated how UCD can be used to enable knowledge translation. Copyright © 2017 Elsevier B.V. All rights reserved.

Cast Off expansion plan by rapid improvement through Optimization tool design, Tool Parameters and using Six Sigma’s ECRS Technique

Science.gov (United States)

Gopalakrishnan, T.; Saravanan, R.

2017-03-01

Powerful management concepts step-up the quality of the product, time saving in producing the product thereby increase the production rate, improves tools and techniques, work culture, work place and employee motivation and morale. In this paper discussed about the case study of optimizing the tool design, tool parameters to cast off expansion plan according ECRS technique. The proposed designs and optimal tool parameters yielded best results and meet the customer demand without expansion plan. Hence the work yielded huge savings of money (direct and indirect cost), time and improved the motivation and more of employees significantly.

Planning of designing and installation of mechanical elements at the gear speed reducer on the basis of the parameter technology

Directory of Open Access Journals (Sweden)

D. Letić

2013-01-01

Full Text Available The development and implementation of the computer methods at project managing in the part of the planning of designing and installation of mechanical elements with the fit (assembly block of the gear speed reducer is significant and at present irreplaceable engineering task if it has been realized by the modern parameter technology. There are multifunction uses of this organized group of activities, beginning from the quick changeability of elements still in the phase of designing and constructing, thanks to the characteristics of their associativity, still to the wide basis of standard elements that are incorporated in the very program package. Meanwhile, these activities are not simple, so their realization has to be planned from the stand - point of time, resource and cost of realization. For the very designing and constructing was used AutoCAD Mechanical, and for the design managing Microsoft Project.

SU-E-T-43: A Methodology for Quality Control of IMPT Treatment Plan Based On VMAT Plan

International Nuclear Information System (INIS)

Jiang, S; Yang, Y; Liao, L; Wang, X; Li, H; Zhu, X; Zhang, X

2015-01-01

Purpose: IMPT plan design is highly dependent on planner’s experiences. VMAT plan design is relatively mature and can even be automated. The quality of IMPT plan designed by in-experienced planner could be inferior to that of VMAT plan designed by experienced planner or automatic planning software. Here we introduce a method for designing IMPT plan based on VMAT plan to ensure the IMPT plan be superior to IMRT/VMAT plan for majority clinical scenario. Methods: To design a new IMPT plan, a VMAT plan is first generated either by experienced planner or by in-house developed automatic planning system. An in-house developed tool is used to generate the dose volume constrains for the IMPT plan as plan template to Eclipse TPS. The beam angles for IMPT plan are selected based on the preferred angles in the VMAT plan. IMPT plan is designed by importing the plan objectives generated from VMAT plan. Majority thoracic IMPT plans are designed using this plan approach in our center. In this work, a thoracic IMPT plan under RTOG 1308 protocol is selected to demonstrate the effectiveness and efficiency of this approach. The dosimetric indices of IMPT are compared with VMAT plan. Results: The PTV D95, lung V20, MLD, mean heart dose, esophagus D1, cord D1 are 70Gy, 31%, 17.8Gy, 25.5Gy, 73Gy, 45Gy for IMPT plan and 65.3Gy, 34%, 21.6Gy, 35Gy, 74Gy, 48Gy for VMAT plan. For majority cases, the high dose region of the normal tissue which is in proximity of PTV is comparable between IMPT and VMAT plan. The low dose region of the IMPT plan is significantly better than VMAT plan. Conclusion: Using the knowledge gained in VMAT plan design can help efficiently and effectively design high quality IMPT plan. The quality of IMPT plan can be controlled to ensure the superiority of IMPT plan compared to VMAT/IMRT plan

SU-E-T-43: A Methodology for Quality Control of IMPT Treatment Plan Based On VMAT Plan

Energy Technology Data Exchange (ETDEWEB)

Jiang, S [UT MD Anderson Cancer Center (United States); Tianjin Medical University Cancer Institute and Hospital (China); Yang, Y [UT MD Anderson Cancer Center (United States); Tianjin First Center Hospital (China); Liao, L; Wang, X; Li, H; Zhu, X; Zhang, X [UT MD Anderson Cancer Center (United States)

2015-06-15

Purpose: IMPT plan design is highly dependent on planner’s experiences. VMAT plan design is relatively mature and can even be automated. The quality of IMPT plan designed by in-experienced planner could be inferior to that of VMAT plan designed by experienced planner or automatic planning software. Here we introduce a method for designing IMPT plan based on VMAT plan to ensure the IMPT plan be superior to IMRT/VMAT plan for majority clinical scenario. Methods: To design a new IMPT plan, a VMAT plan is first generated either by experienced planner or by in-house developed automatic planning system. An in-house developed tool is used to generate the dose volume constrains for the IMPT plan as plan template to Eclipse TPS. The beam angles for IMPT plan are selected based on the preferred angles in the VMAT plan. IMPT plan is designed by importing the plan objectives generated from VMAT plan. Majority thoracic IMPT plans are designed using this plan approach in our center. In this work, a thoracic IMPT plan under RTOG 1308 protocol is selected to demonstrate the effectiveness and efficiency of this approach. The dosimetric indices of IMPT are compared with VMAT plan. Results: The PTV D95, lung V20, MLD, mean heart dose, esophagus D1, cord D1 are 70Gy, 31%, 17.8Gy, 25.5Gy, 73Gy, 45Gy for IMPT plan and 65.3Gy, 34%, 21.6Gy, 35Gy, 74Gy, 48Gy for VMAT plan. For majority cases, the high dose region of the normal tissue which is in proximity of PTV is comparable between IMPT and VMAT plan. The low dose region of the IMPT plan is significantly better than VMAT plan. Conclusion: Using the knowledge gained in VMAT plan design can help efficiently and effectively design high quality IMPT plan. The quality of IMPT plan can be controlled to ensure the superiority of IMPT plan compared to VMAT/IMRT plan.

Remedial action plan and site design for stabilization of the inactive uranium mill tailings sites at Rifle, Colorado

Energy Technology Data Exchange (ETDEWEB)

1992-02-01

This appendix assesses the present conditions and data gathered about the two inactive uranium mill tailings sites near Rifle, Colorado, and the designated disposal site six miles north of Rifle in the area of Estes Gulch. It consolidates available engineering, radiological, geotechnical, hydrological, meteorological, and other information pertinent to the design of the Remedial Action Plan (RAP). The data characterize conditions at the mill, tailings, and disposal site so that the Remedial Action Contractor (RAC) may complete final designs for the remedial actions.

A study on the development plan and preliminary design of proton accelerator for nuclear application

Energy Technology Data Exchange (ETDEWEB)

Eom, Tae Yoon; Choi, B H; Park, C K; Chung, K S. and others

1997-11-01

A study on the development plan and preliminary design for the realisation of high current proton accelerator to be used as an essential component for the R and D of accelerator-driven system (ADS) for energy production and transmutation of long-lived radionuclides. Various fields of application of the accelerator such as basic nuclear physics, material science, biology, high energy physics, medicine, etc. were also investigated. From the preliminary design study, 1 GeV (20 mA) - Linac is required for the purposed of transmutation and energy production. Specification of injector, RFQ, CCTL and SL was also suggested. For the case study, a duoplasmatron ion source was designed by KAERI and fabricated by a domestic manufacturer, and the performance was also tested. (author). 71 refs., 61 tabs., 131 figs

K Basin sludge packaging design criteria (PDC) and safety analysis report for packaging (SARP) approval plan

International Nuclear Information System (INIS)

Brisbin, S.A.

1996-01-01

This document delineates the plan for preparation, review, and approval of the Packaging Design Crieteria for the K Basin Sludge Transportation System and the Associated on-site Safety Analysis Report for Packaging. The transportation system addressed in the subject documents will be used to transport sludge from the K Basins using bulk packaging

US ITER Management Plan

International Nuclear Information System (INIS)

1991-12-01

This US ITER Management Plan is the plan for conducting the Engineering Design Activities within the US. The plan applies to all design, analyses, and associated physics and technology research and development (R ampersand D) required to support the program. The plan defines the management considerations associated with these activities. The plan also defines the management controls that the project participants will follow to establish, implement, monitor, and report these activities. The activities are to be conducted by the project in accordance with this plan. The plan will be updated to reflect the then-current management approach required to meet the project objectives. The plan will be reviewed at least annually for possible revision. Section 2 presents the ITER objectives, a brief description of the ITER concept as developed during the Conceptual Design Activities, and comments on the Engineering Design Activities. Section 3 discusses the planned international organization for the Engineering Design Activities, from which the tasks will flow to the US Home Team. Section 4 describes the US ITER management organization and responsibilities during the Engineering Design Activities. Section 5 describes the project management and control to be used to perform the assigned tasks during the Engineering Design Activities. Section 6 presents the references. Several appendices are provided that contain detailed information related to the front material

Virtual 3D planning of tracheostomy placement and clinical applicability of 3D cannula design: a three-step study.

Science.gov (United States)

de Kleijn, Bertram J; Kraeima, Joep; Wachters, Jasper E; van der Laan, Bernard F A M; Wedman, Jan; Witjes, M J H; Halmos, Gyorgy B

2018-02-01

We aimed to investigate the potential of 3D virtual planning of tracheostomy tube placement and 3D cannula design to prevent tracheostomy complications due to inadequate cannula position. 3D models of commercially available cannula were positioned in 3D models of the airway. In study (1), a cohort that underwent tracheostomy between 2013 and 2015 was selected (n = 26). The cannula was virtually placed in the airway in the pre-operative CT scan and its position was compared to the cannula position on post-operative CT scans. In study (2), a cohort with neuromuscular disease (n = 14) was analyzed. Virtual cannula placing was performed in CT scans and tested if problems could be anticipated. Finally (3), for a patient with Duchenne muscular dystrophy and complications of conventional tracheostomy cannula, a patient-specific cannula was 3D designed, fabricated, and placed. (1) The 3D planned and post-operative tracheostomy position differed significantly. (2) Three groups of patients were identified: (A) normal anatomy; (B) abnormal anatomy, commercially available cannula fits; and (C) abnormal anatomy, custom-made cannula, may be necessary. (3) The position of the custom-designed cannula was optimal and the trachea healed. Virtual planning of the tracheostomy did not correlate with actual cannula position. Identifying patients with abnormal airway anatomy in whom commercially available cannula cannot be optimally positioned is advantageous. Patient-specific cannula design based on 3D virtualization of the airway was beneficial in a patient with abnormal airway anatomy.

78 FR 22501 - Designation of Areas for Air Quality Planning Purposes; State of Nevada; Total Suspended Particulate

Science.gov (United States)

2013-04-16

... Areas for Air Quality Planning Purposes; State of Nevada; Total Suspended Particulate AGENCY... designations for total suspended particulate within the State of Nevada because the designations are no longer necessary. These designations relate to the attainment or unclassifiable areas for total suspended...

Optimization Model and Algorithm Design for Airline Fleet Planning in a Multiairline Competitive Environment

Directory of Open Access Journals (Sweden)

Yu Wang

2015-01-01

Full Text Available This paper presents a multiobjective mathematical programming model to optimize airline fleet size and structure with consideration of several critical factors severely affecting the fleet planning process. The main purpose of this paper is to reveal how multiairline competitive behaviors impact airline fleet size and structure by enhancing the existing route-based fleet planning model with consideration of the interaction between market share and flight frequency and also by applying the concept of equilibrium optimum to design heuristic algorithm for solving the model. Through case study and comparison, the heuristic algorithm is proved to be effective. By using the algorithm presented in this paper, the fleet operational profit is significantly increased compared with the use of the existing route-based model. Sensitivity analysis suggests that the fleet size and structure are more sensitive to the increase of fare price than to the increase of passenger demand.

Site study plan for EDBH [Engineering Design Boreholes] No. 1 and 2: Revision 1

International Nuclear Information System (INIS)

1987-12-01

This site study plan describes the Engineering Design Boreholes 1 and 2 field activities to be conducted during early stages of Site Characterization at the Deaf Smith County site, Texas. The field program has been designed to provide data useful in addressing information/data needs resulting from federal/state/local regulations and repository program requirements. A borehole will be drilled at the centerline of each of the planned exploratory shaft locations. The subsurface rock and fluids will be sampled as the boreholes are advanced to total depth of about 2600 ft. Continuous rock core will be taken below the base of the Dockum Group. Hydrologic testing will occur in units thought to be water bearing and in units of particular interest for shaft seals. Field methods/tests are chosen that provide the best or only means of obtaining the required data. The Salt Repository Project (SRP) Networks specify the schedule under which the program will operate. Drilling will not begin until after site ground-water baseline conditions have been established. The Technical Field Services Contractor is responsible for conducting the field program of drilling and testing. Samples and data will be handled and reported in accordance with established SRP procedures. A quality assurance program will be utilized to assure that activities affecting quality are performed correctly and that the appropriate documentation is maintained. 28 refs., 10 figs., 4 tabs

SPANR planning and scheduling

Science.gov (United States)

Freund, Richard F.; Braun, Tracy D.; Kussow, Matthew; Godfrey, Michael; Koyama, Terry

2001-07-01

SPANR (Schedule, Plan, Assess Networked Resources) is (i) a pre-run, off-line planning and (ii) a runtime, just-in-time scheduling mechanism. It is designed to support primarily commercial applications in that it optimizes throughput rather than individual jobs (unless they have highest priority). Thus it is a tool for a commercial production manager to maximize total work. First the SPANR Planner is presented showing the ability to do predictive 'what-if' planning. It can answer such questions as, (i) what is the overall effect of acquiring new hardware or (ii) what would be the effect of a different scheduler. The ability of the SPANR Planner to formulate in advance tree-trimming strategies is useful in several commercial applications, such as electronic design or pharmaceutical simulations. The SPANR Planner is demonstrated using a variety of benchmarks. The SPANR Runtime Scheduler (RS) is briefly presented. The SPANR RS can provide benefit for several commercial applications, such as airframe design and financial applications. Finally a design is shown whereby SPANR can provide scheduling advice to most resource management systems.

OPEN COURSEWARE IN DESIGN AND PLANNING EDUCATION AND UTILIZATION OF DISTANCE EDUCATION OPPORTUNITY: Anadolu University Experience

Directory of Open Access Journals (Sweden)

Hicran Hanım HALAC

2013-01-01

Full Text Available Depending on the evolving technological possibilities, distance and online education applications have gradually gained more significance in the education system. Regarding the issues, such as advancements in the server services, disc capacity, cloud computing opportunities resulting from the increase in the number of the broadband internet users, web design applications; and increase in the number of mobile device and social media users and the time spent on the internet, traditional reading and working habits as well as the preferred information resources of man have considerably changed. In accordance with these changes, it has become an inevitable necessity to improve the higher education courses and learning materials. Any higher education system, which fails to keep up with these requirements, will inevitably have difficulties in providing the students with the necessary knowledge and skills within an appropriate workload frame. Within this context, one of the fields to benefit from distance and online education opportunities is undoubtedly “architecture and design education”. Although the use of computer technologies is inevasible and highly intensive in this field, the speed of conformance with the rapid technological changes and the adoption of the advancements is considerably slow compared to others. However, it is still among the fields where the technological opportunities are utilized at most. Thereby, distance and online education technologies present an essential potential to help students achieve the required planning and architectural knowledge and skills. In this respect, this article evaluates the distance and online education opportunities for design and planning education through the experience of Anadolu University.

Complexity Theories of Cities Have Come of Age An Overview with Implications to Urban Planning and Design

CERN Document Server

Meyer, Han; Stolk, Egbert; Tan, Ekim

2012-01-01

Today, our cities are an embodiment of the complex, historical evolution of knowledge, desires and technology. Our planned and designed activities co-evolve with our aspirations, mediated by the existing technologies and social structures.  The city represents the accretion and accumulation of successive layers of collective activity, structuring and being structured by other, increasingly distant cities, reaching now right around the globe. This historical and structural development cannot therefore be understood or captured by any set of fixed quantitative relations. Structural changes imply that the patterns of growth, and their underlying reasons change over time, and therefore that any attempt to control the morphology of cities and their patterns of flow by means of planning and design, must be dynamical, based on the mechanisms that drive the changes occurring at a given moment. This carefully edited post-proceedings volume gathers a snapshot view by leading researchers in field, of current complexity...

SU-E-T-595: Design of a Graphical User Interface for An In-House Monte Carlo Based Treatment Planning System: Planning and Contouring Tools

International Nuclear Information System (INIS)

EMAM, M; Eldib, A; Lin, M; Li, J; Chibani, O; Ma, C

2014-01-01

Purpose: An in-house Monte Carlo based treatment planning system (MC TPS) has been developed for modulated electron radiation therapy (MERT). Our preliminary MERT planning experience called for a more user friendly graphical user interface. The current work aimed to design graphical windows and tools to facilitate the contouring and planning process. Methods: Our In-house GUI MC TPS is built on a set of EGS4 user codes namely MCPLAN and MCBEAM in addition to an in-house optimization code, which was named as MCOPTIM. Patient virtual phantom is constructed using the tomographic images in DICOM format exported from clinical treatment planning systems (TPS). Treatment target volumes and critical structures were usually contoured on clinical TPS and then sent as a structure set file. In our GUI program we developed a visualization tool to allow the planner to visualize the DICOM images and delineate the various structures. We implemented an option in our code for automatic contouring of the patient body and lungs. We also created an interface window displaying a three dimensional representation of the target and also showing a graphical representation of the treatment beams. Results: The new GUI features helped streamline the planning process. The implemented contouring option eliminated the need for performing this step on clinical TPS. The auto detection option for contouring the outer patient body and lungs was tested on patient CTs and it was shown to be accurate as compared to that of clinical TPS. The three dimensional representation of the target and the beams allows better selection of the gantry, collimator and couch angles. Conclusion: An in-house GUI program has been developed for more efficient MERT planning. The application of aiding tools implemented in the program is time saving and gives better control of the planning process

42 CFR 137.365 - What is the procedure for the Secretary's review and approval of project planning and design...

Science.gov (United States)

2010-10-01

... SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of the...-Governance Tribe? (a) The Secretary shall review and approve planning documents to ensure compliance with... design documents for general compliance with requirements of the construction project agreement. (b) The...

Optimal assignment methods in three-form planned missing data designs for longitudinal panel studies

NARCIS (Netherlands)

Jorgensen, T.D.; Rhemtulla, M.; Schoemann, A.; McPherson, B.; Wu, W.; Little, T.D.

2014-01-01

Planned missing designs are becoming increasingly popular, but because there is no consensus on how to implement them in longitudinal research, we simulated longitudinal data to distinguish between strategies of assigning items to forms and of assigning forms to participants across measurement

Connecting Systems Model Design to Decision-Maker and Stakeholder Needs: Lessons from Louisiana's Coastal Master Plan

Science.gov (United States)

Fischbach, J. R.; Johnson, D.

2017-12-01

Louisiana's Comprehensive Master Plan for a Sustainable Coast is a 50-year plan designed to reduce flood risk and minimize land loss while allowing for the continued provision of economic and ecosystem services from this critical coastal region. Conceived in 2007 in response to hurricanes Katrina and Rita in 2005, the master plan is updated on a five-year planning cycle by the state's Coastal Protection and Restoration Authority (CPRA). Under the plan's middle-of-the-road (Medium) environmental scenario, the master plan is projected to reduce expected annual damage from storm surge flooding by approximately 65% relative to a future without action: from 5.3 billion to 2.2 billion in 2040, and from 12.1 billion to 3.7 billion in 2065. The Coastal Louisiana Risk Assessment model (CLARA) is used to estimate the risk reduction impacts of projects that have been considered for implementation as part of the plan. Evaluation of projects involves estimation of cost effectiveness in multiple future time periods and under a range of environmental uncertainties (e.g., the rates of sea level rise and land subsidence, changes in future hurricane intensity and frequency), operational uncertainties (e.g., system fragility), and economic uncertainties (e.g., patterns of population change and asset exposure). Between the 2012 and 2017 planning cycles, many improvements were made to the CLARA model. These included changes to the model's spatial resolution and definition of policy-relevant spatial units, an improved treatment of parametric uncertainty and uncertainty propagation between model components, the addition of a module to consider critical infrastructure exposure, and a new population growth model. CPRA also developed new scenarios for analysis in 2017 that were responsive to new scientific literature and to accommodate a new approach to modeling coastal morphology. In this talk, we discuss how CLARA has evolved over the 2012 and 2017 planning cycles in response to the needs

An innovative approach for planning and execution of pre-experimental runs for Design of Experiments

Directory of Open Access Journals (Sweden)

Muhammad Arsalan Farooq

2016-09-01

Full Text Available This paper addresses the study of the pre-experimental planning phase of the Design of Experiments (DoE in order to improve the final product quality. The pre-experimental planning phase includes a clear identification of the problem statement, selection of control factors and their respective levels and ranges. To improve production quality based on the DoE a new approach for the pre-experimental planning phase, called Non-Conformity Matrix (NCM, is presented. This article also addresses the key steps of the pre-experimental runs considering a consumer goods manufacturing process. Results of the application for an industrial case show that this methodology can support a clear definition of the problem and also a correct identification of the factor ranges in particular situations. The proposed new approach allows modeling the entire manufacturing system holistically and correctly defining the factor ranges and respective levels for a more effective application of DoE. This new approach can be a useful resource for both research and industrial practitioners who are dedicated to large DoE projects with unknown factor interactions, when the operational levels and ranges are not completely defined.

Designing a Professional Development Plan for the Support Operations Officer of the Forward Support Company

National Research Council Canada - National Science Library

Zimmerman, Edward

1999-01-01

.... Based on these responsibilities, the research question (Does the Army need to design a specific professional development plan to train CSS lieutenants to serve as support operations officers in the FSC...

Design tool for offshore wind farm cluster planning

DEFF Research Database (Denmark)

Hasager, Charlotte Bay; Madsen, Peter Hauge; Giebel, Gregor

2015-01-01

In the framework of the FP7 project EERA DTOC: Design Tool for Offshore wind farm Cluster, a new software supporting the planning of offshore wind farms was developed, based on state-of-the-art approaches from large scale wind potential to economic benchmarking. The model portfolio includes WAs......P, FUGA, WRF, Net-Op, LCoE model, CorWind, FarmFlow, EeFarm and grid code compliance calculations. The development is done by members from European Energy Research Alliance (EERA) and guided by several industrial partners. A commercial spin-off from the project is the tool ‘Wind & Economy’. The software...... by the software and several tests were performed. The calculations include the smoothing effect on produced energy between wind farms located in different regional wind zones and the short time scales relevant for assessing balancing power. The grid code compliance was tested for several cases and the results...

Sustainable green inner-wall design for flexible floor plan

International Nuclear Information System (INIS)

Tawil, N M; Husaini, H A; Ani, A I; Saleh, R M; Basri, H

2013-01-01

The rises of house price in the market is so drastic that it effects the younger generation nowadays especially young executives and young couples who could not afford to buy their first home. The factors that determine the house price presumably are the interior and exterior structural of the house itself. So to lessen the house price, we have to minimize the usage of wet construction thus the idea of having a sustainable green inner-wall implemented into the house with a flexible floor plan. This concept is user-friendly as it is built on needs and the ownership's affordability. They can design the interior of the house however they want with using minimal cost because it does not involve wet construction.

Fuzzy based method for project planning of the infrastructure design for the diagnostic in ITER

International Nuclear Information System (INIS)

Piros, Attila; Veres, Gábor

2013-01-01

The long-term design projects need special preparation before the start of the execution. This preparation usually includes the drawing of the network diagram for the whole procedure. This diagram includes the time estimation of the individual subtasks and gives us information about the predicted dates of the milestones. The calculated critical path in this network characterizes a specific design project concerning to its duration very well. Several methods are available to support this step of preparation. This paper describes a new method to map the structure of the design process and clarify the milestones and predict the dates of these milestones. The method is based on the PERT (Project Evaluation and Review Technique) network but as a novelty it applies fuzzy logic to find out the concerning times in this graph. With the application of the fuzzy logic the handling of the different kinds of design uncertainties becomes feasible. Many kinds of design uncertainties exist from the possible electric blackout up to the illness of an engineer. In many cases these uncertainties are related with human errors and described with linguistic expressions. The fuzzy logic enables to transform these ambiguous expressions into numeric values for further mathematical evaluation. The method is introduced in the planning of the design project of the infrastructure for the diagnostic systems of ITER. The method not only helps the project in the planning phase, but it will be a powerful tool in mathematical modeling and monitoring of the project execution

Fuzzy based method for project planning of the infrastructure design for the diagnostic in ITER

Energy Technology Data Exchange (ETDEWEB)

Piros, Attila, E-mail: attila.piros@gt3.bme.hu [Department of Machine and Product Design, Budapest University of Technology and Economics, Budapest (Hungary); Veres, Gábor [Department of Plasma Physics, Wigner Research Centre for Physics, Hungarian Academy of Sciences, Budapest (Hungary)

2013-10-15

The long-term design projects need special preparation before the start of the execution. This preparation usually includes the drawing of the network diagram for the whole procedure. This diagram includes the time estimation of the individual subtasks and gives us information about the predicted dates of the milestones. The calculated critical path in this network characterizes a specific design project concerning to its duration very well. Several methods are available to support this step of preparation. This paper describes a new method to map the structure of the design process and clarify the milestones and predict the dates of these milestones. The method is based on the PERT (Project Evaluation and Review Technique) network but as a novelty it applies fuzzy logic to find out the concerning times in this graph. With the application of the fuzzy logic the handling of the different kinds of design uncertainties becomes feasible. Many kinds of design uncertainties exist from the possible electric blackout up to the illness of an engineer. In many cases these uncertainties are related with human errors and described with linguistic expressions. The fuzzy logic enables to transform these ambiguous expressions into numeric values for further mathematical evaluation. The method is introduced in the planning of the design project of the infrastructure for the diagnostic systems of ITER. The method not only helps the project in the planning phase, but it will be a powerful tool in mathematical modeling and monitoring of the project execution.

Review and comment on the US Department of Energy Site Characterization Plan Conceptual Design report

International Nuclear Information System (INIS)

1988-10-01

The ''Site Characterization Plan Conceptual Design Report,'' as prepared by the United States Department of Energy and its contractors, depicts the conceptual designs being proposed for the Yucca Mountain, Nevada High-Level Waste Repository. Much of the report is comprised of designs based on large assumptions that lead to inconclusiveness in terms of technical integrity and reasonableness. As a result, the likely success of the designs proposed within the report is highly questionable from a technical and even constructibility standpoint. Grave deficiencies have been found throughout the report ranging from the over-simplification of the geologic and geohydrologic setting to the incorrect determination of the repository horizon's host rock strength. All of these deficiencies found within the report relate directly to the probable outcome of the site characterization of Yucca Mountain and the possible design and construction of a high-level waste repository at the site. It does not appear that a concerted effort has been put forth to develop many of the concepts within the report to a reasonable level of engineering and scientific integrity that would be suitable to meet the needs of and provide the results to the Nation's High-Level Waste Program

Designing and Implementing a Distributed System Architecture for the Mars Rover Mission Planning Software (Maestro)

Science.gov (United States)

Goldgof, Gregory M.

2005-01-01

Distributed systems allow scientists from around the world to plan missions concurrently, while being updated on the revisions of their colleagues in real time. However, permitting multiple clients to simultaneously modify a single data repository can quickly lead to data corruption or inconsistent states between users. Since our message broker, the Java Message Service, does not ensure that messages will be received in the order they were published, we must implement our own numbering scheme to guarantee that changes to mission plans are performed in the correct sequence. Furthermore, distributed architectures must ensure that as new users connect to the system, they synchronize with the database without missing any messages or falling into an inconsistent state. Robust systems must also guarantee that all clients will remain synchronized with the database even in the case of multiple client failure, which can occur at any time due to lost network connections or a user's own system instability. The final design for the distributed system behind the Mars rover mission planning software fulfills all of these requirements and upon completion will be deployed to MER at the end of 2005 as well as Phoenix (2007) and MSL (2009).

Designing Targets for Elective Nodal Irradiation in Lung Cancer Radiotherapy: A Planning Study

International Nuclear Information System (INIS)

Kepka, Lucyna; Tatro, Daniel; Moran, Jean M.; Quint, Leslie E.; Hayman, James A.; Ten Haken, Randall K.; Kong Fengming

2009-01-01

Purpose: To assess doses received by mediastinal and hilar lymph node stations (LNS) delineated according to published recommendations when 'standard' two-dimensional (2D) elective fields are applied and to assess doses to critical structures when fields are designed using 2D and three-dimensional (3D) treatment planning for elective irradiation. Methods and Materials: LNS were delineated on axial CT scans according to existing recommendations. For each case and tumor location, 2D anteroposterior-posteroanterior (AP-PA) elective fields were applied using the AP-PA CT topograms. From the 2D portal fields, 3D dose distributions were then calculated to particular LNS. Next, 3D plans were prepared for elective nodal irradiation for tumors of different lobes. Doses for critical structures were compared for 2D and 3D plans. Results: LNS 1/2R, 1/2L, 3A, 3P, 5, 6, and 8 were not adequately covered in a substantial part of plans by standard 2D portals when guidelines for delineation were strictly followed. The magnitude of the lack of coverage increased with margin application. There was a trend for a higher yet probably still safe dose delivered to lung for 3D plans compared with 2D plans with a prescription dose of 45 Gy. Conclusions: 2D fields did not entirely cover LNS delineated according to the recommendations for 3D techniques. A strict adherence to these guidelines may lead to larger portals than traditionally constructed using 2D methods. Some modifications for clinical implementation are discussed.

Health plans and selection: formal risk adjustment vs. market design and contracts.

Science.gov (United States)

Frank, R G; Rosenthal, M B

2001-01-01

In this paper, we explore the demand for risk adjustment by health plans that contract with private employers by considering the conditions under which plans might value risk adjustment. Three factors reduce the value of risk adjustment from the plans' point of view. First, only a relatively small segment of privately insured Americans face a choice of competing health plans. Second, health plans share much of their insurance risk with payers, providers, and reinsurers. Third, de facto experience rating that occurs during the premium negotiation process and management of coverage appear to substitute for risk adjustment. While the current environment has not generated much demand for risk adjustment, we reflect on its future potential.

Space architecture education for engineers and architects designing and planning beyond earth

CERN Document Server

Häuplik-Meusburger, Sandra

2016-01-01

This book considers two key educational tools for future generations of professionals with a space architecture background in the 21st century: (1) introducing the discipline of space architecture into the space system engineering curricula; and (2) developing space architecture as a distinct, complete training curriculum.  Professionals educated this way will help shift focus from solely engineering-driven transportation systems and “sortie” missions towards permanent off-world human presence. The architectural training teaches young professionals to operate at all scales from the “overall picture” down to the smallest details, to provide directive intention–not just analysis–to design opportunities, to address the relationship between human behavior and the built environment, and to interact with many diverse fields and disciplines throughout the project lifecycle. This book will benefit individuals and organizations responsible for planning transportation and habitat systems in space, while a...

Effective Design and Planning Specification of Low Impact Development Practices Using Water Management Analysis Module (WMAM: Case of Malaysia

Directory of Open Access Journals (Sweden)

Kamal Ahmed

2017-02-01

Full Text Available Developers are increasingly looking for the best management practices to reduce the risk of floods in rapidly growing urban areas. Low impact development (LID is regarded as one of the most suitable solutions for urban stormwater management and thus the U.S. EPA’s (Environmental Protection Agency SWMM5.1 (Storm Water Management Model added the hydrological simulation function for LID structures in 2009. However, SWMM5.1 cannot consider the optimal or best physical specifications of LID design and planning fitted to a study area, nor can it instantly derive the best combination for multiple LID designs and plans. Therefore, in this study, a web-based decision support system (DSS for the EPA’s SWMM 5.1, referred to as the Water Management Analysis Module (WMAM is used to decide the most effective specifications of design and planning parameters for LID structure. This study was carried out over an urban catchment of University Technology Malaysia campus located in Johor, Malaysia. The hydrologic cycles with and without LID were simulated using EPA SWMM5.1. The sensitivity analysis and multiple scenario analysis were performed using WMAM. As a result, the effective specification of LID design parameters indicates that peak flow is reduced to 20.95% and 17.5% for two sub-catchments, S1 (highest by area and S6 (lowest by area by installing an LID structure. Thus, this study provides a tool for the best solution for what values for physical parameters will be the best for a specified LID type and what capacities can achieve the particular objectives using WMAM.

Design and performance analysis of global path planning techniques for autonomous mobile robots in grid environments

Directory of Open Access Journals (Sweden)

Imen Chaari

2017-03-01

Full Text Available This article presents the results of the 2-year iroboapp research project that aims at devising path planning algorithms for large grid maps with much faster execution times while tolerating very small slacks with respect to the optimal path. We investigated both exact and heuristic methods. We contributed with the design, analysis, evaluation, implementation and experimentation of several algorithms for grid map path planning for both exact and heuristic methods. We also designed an innovative algorithm called relaxed A-star that has linear complexity with relaxed constraints, which provides near-optimal solutions with an extremely reduced execution time as compared to A-star. We evaluated the performance of the different algorithms and concluded that relaxed A-star is the best path planner as it provides a good trade-off among all the metrics, but we noticed that heuristic methods have good features that can be exploited to improve the solution of the relaxed exact method. This led us to design new hybrid algorithms that combine our relaxed A-star with heuristic methods which improve the solution quality of relaxed A-star at the cost of slightly higher execution time, while remaining much faster than A* for large-scale problems. Finally, we demonstrate how to integrate the relaxed A-star algorithm in the robot operating system as a global path planner and show that it outperforms its default path planner with an execution time 38% faster on average.

New Design of Mobile Robot Path Planning with Randomly Moving Obstacles

Directory of Open Access Journals (Sweden)

T. A. Salih

2013-05-01

Full Text Available The navigation of a mobile robot in an unknown environment has always been a very challenging task. In order to achieve safe and autonomous navigation, the mobile robot needs to sense the surrounding environment and plans a collision-free path. This paper focuses on designing and implementing a mobile robot which has the ability of navigating smoothly in an unknown environment, avoiding collisions, without having to stop in front of obstacles, detecting leakage of combustible gases and transmitting a message of detection results to the civil defense unit automatically through the Internet to the E-mail. This design uses the implementation of artificial neural network (ANN on a new technology represented by Field Programmable Analog Array (FPAA for controlling the motion of the robot. The robot with the proposed controller is tested and has completed the required objective successfully.

Data Management Plan and Functional System Design for the Information Management System of the Clinch River Remedial Investigation and Waste Area Grouping 6

Energy Technology Data Exchange (ETDEWEB)

Ball, T.; Brandt, C.; Calfee, J.; Garland, M.; Holladay, S.; Nickle, B.; Schmoyer, D.; Serbin, C.; Ward, M. [Oak Ridge National Lab., TN (United States)

1994-03-01

The Data Management Plan and Functional System Design supports the Clinch River Remedial Investigation (CRRI) and Waste Area Grouping (WAG) 6 Environmental Monitoring Program. The objective of the Data Management Plan and Functional System Design is to provide organization, integrity, security, traceability, and consistency of the data generated during the CRRI and WAG 6 projects. Proper organization will ensure that the data are consistent with the procedures and requirements of the projects. The Information Management Groups (IMGs) for these two programs face similar challenges and share many common objectives. By teaming together, the IMGs have expedited the development and implementation of a common information management strategy that benefits each program.

Optical network design and planning

CERN Document Server

Simmons, Jane M

2014-01-01

This book takes a pragmatic approach to designing state-of-the-art optical networks for backbone, regional, and metro-core networks.   Algorithms and methodologies related to routing, regeneration, wavelength assignment, subrate-traffic grooming, and protection are presented, with an emphasis on optical-bypass-enabled (or all-optical) networks. There are numerous case studies throughout the text to illustrate the concepts, using realistic networks and traffic sets. A full chapter of economic studies offers guidelines as to when and how optical-bypass technology should be deployed. There is also extensive coverage of recent research to provide insight into how optical networks are likely to evolve. The second edition includes new chapters on dynamic optical networking and flexible/elastic optical networks. There is expanded coverage of new physical-layer technology and its impact on network design, along with enhanced coverage of ROADM architectures, including the colorless, directionless, contentionless, a...

Waste analysis plan for confirmation or completion of Tank Farms backlog waste designation

International Nuclear Information System (INIS)

1993-10-01

On January 23, 1992, waste management problems in the Tank Farms were acknowledged through an Unusual Occurrence (UO) Report No. RL-WHC-TANKFARM-19920007 (DOE-RL 1992). On March 10, 1993, the Washington State Department of Ecology (Ecology) issued Order 93NM-201 (Order) to the US Department of Energy, Richland Operations Office (DOE-RL) and the Westinghouse Hanford Company (Westinghouse Hanford) asserting that ''DOE-RL and Westinghouse Hanford have failed to designate approximately 2,000 containers of solid waste in violation of WAC 173-303170(l)(a) and the procedures of WAC 173-303-070'' (Ecology 1993). On June 30, 1993, a Settlement Agreement and Order Thereon (Settlement Agreement) among Ecology, DOE-RL, and Westinghouse Hanford was approved by the Pollution Control Hearings Board (PCHB). Item 3 of the Settlement Agreement requires that DOE-RL and Westinghouse Hanford submit a waste analysis plan (WAP) for the waste subject to the Order by September 1, 1993 (PCHB 1993). This WAP satisfies the requirements of Item 3 of the Order as amended per the Settlement Agreement. Item 3 states: ''Within forty (40) calendar days of receipt of this Order, DOE-RL and WHC provide Ecology with a waste analysis plan for review and approval detailing the established criteria and procedures for waste inspection, segregation, sampling, designation, and repackaging of all containers reported in item No. 1. The report shall include sampling plan criteria for different contaminated media, i.e., soils, compactable waste, high-efficiency particular air (HEPA) filters, etc., and a schedule for completing the work within the time allowed under this Order.''

Planning and Managing Drupal Projects

CERN Document Server

Nordin, Dani

2011-01-01

If you're a solo website designer or part of a small team itching to build interesting projects with Drupal, this concise guide will get you started. Drupal's learning curve has thrown off many experienced designers, particularly the way it handles design challenges. This book shows you the lifecycle of a typical Drupal project, with emphasis on the early stages of site planning. Learn how to efficiently estimate and set up your own project, so you can focus on ways to make your vision a reality, rather than let project management details constantly distract you. Plan and estimate your projec

Comment and response document for the final remedial action plan and site design for stabilization of the inactive uranium mill tailings sites at Slick Rock, Colorado. Revision 2

International Nuclear Information System (INIS)

1996-05-01

This document for the final remedial action plan and site design has been prepared for US Department of Energy Environmental Restoration Division as part of the Uranium Mill Tailings Remedial Action plan. Comments and responses are included for the site design for stabilization of the inactive uranium mill tailings sites at Slick Rock, Colorado

Development Plans and Life Plans: Knowledge Sharing?

Directory of Open Access Journals (Sweden)

Juan José Vieco Albarracín

2010-02-01

Full Text Available This article explores the possibilities of establishing knowledge sharing between governmental development plans and the “life plans” (planes de vida made by indigenous organizations, in particular the life plan of the Asociación de Autoridades Indígenas del Resguardo Tikuna, Cocama, Yagua (Aticoya, municipality of Puerto Nariño, Amazonas, Colombia. Colombia’s Constitution of 1991 created the ETI (Entidad Territorial Indígena,“indigenous territorial entity” as a territorial unit, just like municipalities, departments, and districts. This means that indigenous reservations (or “reserves” or “preserves” and associations should manage public funds, for which they must design a life plan. This inclusion and recognition of indigenous peoples entails that those life plans should articulate with the municipal, departmental, and national development plans. The article illustrates this situation by comparing two welfare programs –Resa (Red de Seguridad Alimentaria “Food Security Network” and Familias Guardabosques (“Forest Ranger Families”– and two income-generating productive and service (tourism projects carried out by Aticoya and the local indigenous councils of communities on the Amazon and Loretoyacu Rivers.

Institutional Design for Strategic Environmental Assessment on Urban Economic and Social Development Planning in China

International Nuclear Information System (INIS)

Song Guojun; Zhou Li; Zhang Lei

2011-01-01

The National Economic and Social Development Plans (NESDPs) of cities in China, given their comprehensive, integrated and strategic nature, have significant and profound impacts on the development of cities and their embedded ecological environments. Strategic Environmental Assessments (SEAs) on city NESDPs have the potential to improve environmental policy integration at strategic level and to safeguard the sustainable development of cities. However, these plans are normally exempted from the current SEA requirement in China. We argue that it is more feasible to apply SEAs on city NESDPs before SEAs are expanded to higher level NESDPs in China. This article attempts to propose a China-specific institutional design for SEAs on city NESDPs based on experiments in selected cities and within the current legal framework. To obtain a holistic view about the long-term development of cities, more qualitative and descriptive analysis-based assessment methods should be adopted to broaden participation, to encourage the exchange of information and to reach consensus. - Highlights: → National Economic and Social Development Plans for Cities (NESDPs) in China is a very popular and significant decision made by municipal government. → We propose a institutional framework to conduct strategic environmental assessment to NESDPs. → The key features of the institutional framework are the independent SEA approval committee and a professional consulting agency.

Nez Perce Tribal Hatchery Project, Operations and Maintenance and Planning and Design, 2001 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Larson, Roy Edward; Walker, Grant W.; Penney, Aaron K. (Nez Perce Tribe, Lapwai, ID)

2006-03-01

This report fulfills the contract obligations based on the Statement of Work (SOW) for the project as contracted with Bonneville Power Administration (BPA). Nez Perce Tribal Hatchery (NPTH) Year-2001 annual report combines information from two contracts with a combined value of $2,336,491. They are identified by Bonneville Power Administration as follows: (1) Operations and Maintenance--Project No. 1983-350-00, Contract No. 4504, and (2) Planning and Design--Project No. 1983-350-00, Contract No. 4035. The Operations and Maintenance (O&M) budget of $2,166,110 was divided as follows: Facility Development and Fish Production Costs--$860,463; and Equipment Purchases as capital cost--$1,305,647 for equipment and subcontracts. The Planning and Design (P&D) budget of $170,381 was allocated to development of a Coho master planning document in conjunction with Nez Perce Tribal Hatchery. The O&M budget expenditures represent personnel and fish production expenses; e.g., administration, management, coordination, facility development, personnel training and fish production costs for spring Chinook and Coho salmon. Under Objective 1: Fish Culture Training and Education, tribal staff worked at Clearwater Anadromous Hatchery (CAFH) an Idaho Department of Fish and Game (IDFG) facility to produce spring Chinook smolt and parr for release that are intended to provide future broodstock for NPTH. As a training exercise, BPA allowed tribal staff to rear Coho salmon at Dworshak National Fish Hatchery, a U.S. Fish and Wildlife Service (USFWS) facility. This statement of work allows this type of training to prepare tribal staff to later rear salmon at Nez Perce Tribal Hatchery under Task 1.6. As a subset of the O&M budget, the equipment purchase budget of $1,305,647 less $82,080 for subcontracts provides operational and portable equipment necessary for NPTH facilities after construction. The equipment budget for the year was $1,223,567; this year's purchases amounted $287,364.48 (see

Using contingent choice methods to assess consumer preferences about health plan design.

Science.gov (United States)

Marquis, M Susan; Buntin, Melinda Beeuwkes; Kapur, Kanika; Yegian, Jill M

2005-01-01

American insurers are designing products to contain health care costs by making consumers financially responsible for their choices. Little is known about how consumers will view these new designs. Our objective is to examine consumer preferences for selected benefit designs. We used the contingent choice method to assess willingness to pay for six health plan attributes. Our sample included subscribers to individual health insurance products in California, US. We used fitted logistic regression models to explore how preferences for the more generous attributes varied with the additional premium and with the characteristics of the subscriber. High quality was the most highly valued attribute based on the amounts consumers report they are willing to pay. They were also willing to pay substantial monthly premiums to reduce their overall financial risk. Individuals in lower health were willing to pay more to reduce their financial risk than individuals in better health. Consumers may prefer tiered-benefit designs to those that involve overall increases in cost sharing. More consumer information is needed to help consumers better evaluate the costs and benefits of their insurance choices.

Virtual Environment as a Design Tool for Sustainable Residential Spaces in Light of Theory of Planned Behavior

Directory of Open Access Journals (Sweden)

Hebatalla Sherin Nazmy

2016-01-01

Full Text Available This study aims to reveal the impact of Virtual Environment as a design tool on the interior architect's design behavior towards adopting sustainable residential interior design practices. This approach is guided by the Theory of Planned Behaviour as a theoretical framework; the purpose as such would serve to bridge the gap between theoretical knowledge and its practical implementation to promote sustainable design practices. Findings revealed that Virtual Environment is anticipated to assist the interior architect in integrating the complex sustainable residential design objectives, and thus positively affect the interior architect's behavioral performance towards embracing sustainable residential design solutions.

Assessment of PlanIQ Feasibility DVH for head and neck treatment planning.

Science.gov (United States)

Fried, David V; Chera, Bhishamjit S; Das, Shiva K

2017-09-01

Designing a radiation plan that optimally delivers both target coverage and normal tissue sparing is challenging. There are limited tools to determine what is dosimetrically achievable and frequently the experience of the planner/physician is relied upon to make these determinations. PlanIQ software provides a tool that uses target and organ at risk (OAR) geometry to indicate the difficulty of achieving different points for organ dose-volume histograms (DVH). We hypothesized that PlanIQ Feasibility DVH may aid planners in reducing dose to OARs. Clinically delivered head and neck treatments (clinical plan) were re-planned (re-plan) putting high emphasis on maximally sparing the contralateral parotid gland, contralateral submandibular gland, and larynx while maintaining routine clinical dosimetric objectives. The planner was blinded to the results of the clinically delivered plan as well as the Feasibility DVHs from PlanIQ. The re-plan treatments were designed using 3-arc VMAT in Raystation (RaySearch Laboratories, Sweden). The planner was then given the results from the PlanIQ Feasibility DVH analysis and developed an additional plan incorporating this information using 4-arc VMAT (IQ plan). The DVHs across the three treatment plans were compared with what was deemed "impossible" by PlanIQ's Feasibility DVH (Impossible DVH). The impossible DVH (red) is defined as the DVH generated using the minimal dose that any voxel outside the targets must receive given 100% target coverage. The re-plans performed blinded to PlanIQ Feasibilty DVH achieved superior sparing of aforementioned OARs compared to the clinically delivered plans and resulted in discrepancies from the impossible DVHs by an average of 200-700 cGy. Using the PlanIQ Feasibility DVH led to additionalOAR sparing compared to both the re-plans and clinical plans and reduced the discrepancies from the impossible DVHs to an average of approximately 100 cGy. The dose reduction from clinical to re-plan and re-plan to

The proposed human factors engineering program plan for man-machine interface system design of the next generation NPP in Korea

International Nuclear Information System (INIS)

Oh, I.S.; Lee, H.C.; Seo, S.M.; Cheon, S.W.; Park, K.O.; Lee, J.W.; Sim, B.S.

1994-01-01

Human factors application to nuclear power plant (NPP) design, especially, to man-machine interface system (MMIS) design becomes an important issue among the licensing requirements. Recently, the nuclear regulatory bodies require the evidence of systematic human factors application to the MMIS design. Human Factors Engineering Program Plan (HFEPP), as a basis and central one among the human factors application by the MMIS designers. This paper describes the framework of HFEPP for the MMIS design of next generation NPP (NG-NPP) in Korea. This framework provides an integral plan and some bases of the systematic application of human factors to the MMIS design, and consists of purpose and scope, codes and standards, human factors organization, human factors tasks, engineering control methodology, human factors documentations, and milestones. The proposed HFEPP is a top level document to define and describe human factors tasks, based on each step of MMIS design process, in view point of how, what, when and by whom to be performed. (author). 11 refs, 1 fig

Planning an integrated agriculture and health program and designing its evaluation: Experience from Western Kenya.

Science.gov (United States)

Cole, Donald C; Levin, Carol; Loechl, Cornelia; Thiele, Graham; Grant, Frederick; Girard, Aimee Webb; Sindi, Kirimi; Low, Jan

2016-06-01

Multi-sectoral programs that involve stakeholders in agriculture, nutrition and health care are essential for responding to nutrition problems such as vitamin A deficiency among pregnant and lactating women and their infants in many poor areas of lower income countries. Yet planning such multi-sectoral programs and designing appropriate evaluations, to respond to different disciplinary cultures of evidence, remain a challenge. We describe the context, program development process, and evaluation design of the Mama SASHA project (Sweetpotato Action for Security and Health in Africa) which promoted production and consumption of a bio-fortified, orange-fleshed sweetpotato (OFSP). In planning the program we drew upon information from needs assessments, stakeholder consultations, and a first round of the implementation evaluation of a pilot project. The multi-disciplinary team worked with partner organizations to develop a program theory of change and an impact pathway which identified aspects of the program that would be monitored and established evaluation methods. Responding to the growing demand for greater rigour in impact evaluations, we carried out quasi-experimental allocation by health facility catchment area, repeat village surveys for assessment of change in intervention and control areas, and longitudinal tracking of individual mother-child pairs. Mid-course corrections in program implementation were informed by program monitoring, regular feedback from implementers and partners' meetings. To assess economic efficiency and provide evidence for scaling we collected data on resources used and project expenses. Managing the multi-sectoral program and the mixed methods evaluation involved bargaining and trade-offs that were deemed essential to respond to the array of stakeholders, program funders and disciplines involved. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Planning intensive care unit design using computer simulation modeling: optimizing integration of clinical, operational, and architectural requirements.

Science.gov (United States)

OʼHara, Susan

2014-01-01

Nurses have increasingly been regarded as critical members of the planning team as architects recognize their knowledge and value. But the nurses' role as knowledge experts can be expanded to leading efforts to integrate the clinical, operational, and architectural expertise through simulation modeling. Simulation modeling allows for the optimal merge of multifactorial data to understand the current state of the intensive care unit and predict future states. Nurses can champion the simulation modeling process and reap the benefits of a cost-effective way to test new designs, processes, staffing models, and future programming trends prior to implementation. Simulation modeling is an evidence-based planning approach, a standard, for integrating the sciences with real client data, to offer solutions for improving patient care.

Final disposal of spent nuclear fuel in Sweden. Some unresolved issues and challenges in the design and implementation of the forthcoming planning and EIA processes

Energy Technology Data Exchange (ETDEWEB)

Bjarnadottir, H.; Hilding-Rydevik, T. [Nordregio, Stockholm (Sweden)

2001-06-01

The aim of the study is to highlight some unresolved and challenging issues in the forthcoming approximately six year long Environmental Impact Assessment (EIA) and planning process of the long-term disposal of spent nuclear fuel in Sweden. Different international and Nordic experiences of the processes for final disposal as well as from other development of similar scope, where experiences assumed to be of importance for final disposal of nuclear waste, have been described. Furthermore, issues relating to 'good EIA practice' as well as certain aspects of planning theory have also been presented. The current Swedish situation for the planning and EIA process of the final disposal of spent nuclear fuel was also been summarized. These different 'knowledge areas' have been compared and measured against our perception of the expectations towards the forthcoming process, put forward by different Swedish actors in the field. The result is a presentation of a number of questions and identification issues that the authors consider need special attention in the design and conduction of the planning and EIA process. The study has been realized through a literature survey and followed by reading and analysis of the written material. The main focus of the literature search was on material describing planning processes, actor perspectives and EIA. Material and literature on the technical and scientific aspects of spent nuclear fuel disposal was however deliberately avoided. There is a wealth of international and Swedish literature concerning final disposal of spent nuclear fuel - concerning both technical issues and issues concerning for example public participation and risk perception. But material of a more systematic and comparative nature (relating to both empirical and theoretical issues, and to practical experiences) in relation to EIA processes and communicative planning for final disposal of spent nuclear fuel seems to be more sparsely represented

Framework for Maintenance Planning

DEFF Research Database (Denmark)

Soares, C. Guedes; Duarte, J. Caldeira; Garbatov, Y.

2010-01-01

the design and during the whole life span of operational use, within an integrated framework founded on risk and reliability based techniques. The document addresses designers, decision makers and professionals responsible for or involved in establishing maintenance plans. The purpose of this document......The present document presents a framework for maintenance planning. Maintenance plays a fundamental role in counteracting degradation effects, which are present in all infrastructure and industrial products. Therefore, maintenance planning is a very critical aspect to consider both during...... is to present maintenance as an integrated approach that needs to be planned, designed, engineered, and controlled by proper qualitative and quantitative techniques. This document outlines the basic premises for maintenance planning and provides the general philosophies that can be followed and points to a best...

Remedial Design/Remedial Action Work Plan for Operable Units 6-05 and 10-04, Phase III

Energy Technology Data Exchange (ETDEWEB)

R. P. Wells

2006-09-19

The remedial design/remedial action for Operable Unit 6-05 (Waste Area Group 6) and Operable Unit 10-04 (Waste Area Group 10) - collectively called Operable Unit 10-04 has been divided into four phases. Phase I consists of developing and implementing institutional controls at Operable Unit 10-04 sites and developing and implementing Idaho National Laboratory-wide plans for both institutional controls and ecological monitoring. Phase II will remediate sites contaminated with trinitrotoluene and Royal Demolition Explosive. Phase III will remediate lead contamination at a gun range, and Phase IV will remediate hazards from unexploded ordnance. This Phase III remedial Design/Remedial Action Work Plan addresses the remediation of lead-contaminated soils found at the Security Training Facility (STF)-02 Gun Range located at the Idaho National Laboratory. Remediation of the STF-02 Gun Range will include excavating contaminated soils; physically separating copper and lead for recycling; returning separated soils below the remediation goal to the site; stabilizing contaminated soils, as required, and disposing of the separated soils that exceed the remediation goal; encapsulating and disposing of creosote-contaminated railroad ties and power poles; removing and disposing of the wooden building and asphalt pads found at the STF-02 Gun Range; sampling and analyzing soil to determine the excavation requirements; and when the remediation goals have been met, backfilling and contouring excavated areas and revegetating the affected area.

Using ProModel as a simulation tools to assist plant layout design and planning: Case study plastic packaging factory

OpenAIRE

Pochamarn Tearwattanarattikal; Suwadee Namphacharoen; Chonthicha Chamrasporn

2008-01-01

This study is about the application of a Simulation Model to assist decision making on expanding capacity and plant layout design and planning. The plant layout design concept is performed first to create the physical layouts then the simulation model used to test the capability of plant to meet various demand forecast scena. The study employed ProModel package as a tool, using the model to compare the performances in term of % utilization, characteristics of WIP and ability to meet due date....

Virtual 3D planning of tracheostomy placement and clinical applicability of 3D cannula design : A three-step study

NARCIS (Netherlands)

de Kleijn, Bertram J; Kraeima, Joep; Wachters, Jasper E; van der Laan, Bernard F A M; Wedman, Jan; Witjes, M J H; Halmos, Gyorgy B

AIM: We aimed to investigate the potential of 3D virtual planning of tracheostomy tube placement and 3D cannula design to prevent tracheostomy complications due to inadequate cannula position. MATERIALS AND METHODS: 3D models of commercially available cannula were positioned in 3D models of the

Review of the TREAT Conversion Conceptual Design and Fuel Qualification Plan

Energy Technology Data Exchange (ETDEWEB)

Diamond, David

2017-12-29

The U.S. Department of Energy (DOE) is preparing to re establish the capability to conduct transient testing of nuclear fuels at the Idaho National Laboratory (INL) Transient Reactor Test (TREAT) facility. The original TREAT core went critical in February 1959 and operated for more than 6,000 reactor startups before plant operations were suspended in 1994. DOE is now planning to restart the reactor using the plant's original high-enriched uranium (HEU) fuel. At the same time, the National Nuclear Security Administration (NNSA) Office of Material Management and Minimization Reactor Conversion Program is supporting analyses and fuel fabrication studies that will allow for reactor conversion to low-enriched uranium (LEU) fuel (i.e., fuel with less than 20% by weight 235U content) after plant restart. The TREAT Conversion Program's objectives are to perform the design work necessary to generate an LEU replacement core, to restore the capability to fabricate TREAT fuel element assemblies, and to implement the physical and operational changes required to convert the TREAT facility to use LEU fuel.

Considering Sound in Planning and Designing Public Spaces : A Review of Theory and Applications and a Proposed Framework for Integrating Research and Practice

NARCIS (Netherlands)

Bild, E.; Coler, M.; Pfeffer, K.; Bertolini, L.

2016-01-01

We critically review the literature on the relationship between users of public spaces and their auditory environments, and how this knowledge is integrated in the planning, design, and management of public spaces as well as in technologies for acoustic and spatial data collection, analysis, and

When does treatment plan optimization require inverse planning?

International Nuclear Information System (INIS)

Sherouse, George W.

1995-01-01

Increasing maturity of image-based computer-aided design of three-dimensional conformal radiotherapy has recently sparked a great deal of work in the area of treatment plan optimization. Optimization of a conformal photon beam treatment plan is that exercise through which a set of intensity-modulated static beams or arcs is specified such that, when the plan is executed, 1) a region of homogeneous dose is produced in the patient with a shape which geometrically conforms (within a specified tolerance) to the three-dimensional shape of a designated target volume and 2) acceptably low incidental dose is delivered to non-target tissues. Interest in conformal radiotherapy arise from a fundamental assumption that there is significant value to be gained from aggressive customization of the treatment for each individual patient In our efforts to design optimal treatments, however, it is important to remember that, given the biological and economic realities of clinical radiotherapy, mathematical optimization of dose distribution metrics with respect to some minimal constraint set is not a necessary or even sufficient condition for design of a clinically optimal treatment. There is wide variation in the complexity of the clinical situations encountered in practice and there are a number of non-physical criteria to be considered in planning. There is also a complementary variety of computational and engineering means for achieving optimization. To date, the scientific dialogue regarding these techniques has concentrated on development of solutions to worst-case scenarios, largely in the absence of consideration of appropriate matching of solution complexity to problem complexity. It is the aim of this presentation to propose a provisional stratification of treatment planning problems, stratified by relative complexity, and to identify a corresponding stratification of necessary treatment planning techniques. It is asserted that the subset of clinical radiotherapy cases for

Are we developing walkable suburbs through urban planning policy? Identifying the mix of design requirements to optimise walking outcomes from the 'Liveable Neighbourhoods' planning policy in Perth, Western Australia.

Science.gov (United States)

Hooper, Paula; Knuiman, Matthew; Bull, Fiona; Jones, Evan; Giles-Corti, Billie

2015-05-16

Planning policy makers and practitioners are requesting clearer guidance on the 'essential' ingredients as assessed by public health researchers to ensure suburban neighbourhood environments are designed to promote active living behaviours such as walking. To identify the combination of design requirements from the 'Liveable Neighbourhoods' (LN) planning policy in Perth, Western Australia that were optimally supportive of walking. K-means cluster analysis identified groups of developments with homogeneous LN features from its community design (CD), movement network (MN), lot layout (LL) and public parkland (PP) elements. Walking behaviours measured using the Neighbourhood Physical Activity Questionnaire were compared between participants resident in the different clusters, adjusting for demographic characteristics, self-selection factors, stage of construction and scale of development. Compared with participants living in the referent cluster of 'poor CD and PP developments' those living in: 'MN and LL developments' had higher odds of doing any (OR = 1.74; 95 % CI = 1.22, 2.48) and ≥60 min walking for recreation (WR) (OR = 2.05; 1.46, 2.88); 'PP developments' had increased odds of doing any WR (OR = 3.53; 2.02, 6.17), ≥60 min WR (OR = 3.37; 1.98, 5.74) and any total walking (TW) (OR = 2.35; 1.36, 4.09); 'CD-MN developments' had increased odds of doing any walking for transport (WT) (OR = 2.64; 1.38, 5.06), ≥60 min WT (OR = 1.98; 1.09, 3.61), any TW (OR = 1.71; 1.44, 2.03), ≥60 min TW (OR = 1.77; 1.14, 2.76) and ≥150 min TW (OR = 1.47; 1.15, 1.86). This study is the first to have empirically identified a mix of specific and distinguishing planning policy neighbourhood design requirements to optimise walking outcomes. These findings will assist in the assessment of urban plans for greenfield suburban developments designed to promote walking and physical activity.

Effective strategy making: Co-designing scenarios as a tool for effective strategic planning

Directory of Open Access Journals (Sweden)

Jan Vogelij

2015-08-01

-producing, as making together a product and collaboration towards a strategy, defined as a common exploration of possibilities. The interactions of the participants in the strategy making process, potentially creating trust and enhancing social cohesion, may be more important than the resulting concept for a development strategy. Therefore our attention focused on the way strategies are made in the black box of specific processes. The interactions aiming at co-ownership and collaboration are central in this novel ’interactions approach’. The resulting strategy does not necessarily contain (infra structural projects; a spatial strategy concerns a selected localised policy and argumentative framework for future development. Societal relevance Being a planning consultant with over forty years of experience in practice, the author highly values practical applicability in society. Understanding of practice-related factors for effectiveness of strategy making is important because effective public management saves costs for society; a framework expressing the aimed-for direction of development provides clarity for private initiatives; an agreed strategy helps to coordinate sector policies; several EU and national subsidies for projects require a locally agreed structural frame. Because a development vision concerns the direction of an envisaged development, its effectiveness is defined in terms of performance of the argumentative framework based on the story lines developed in the discussions during the strategy making process. Our search aims at identifying recommendations for enhanced chances for performing strategies in praxis. Approach A theoretical frame was composed based on literature in the fields of planning theory, policy analysis and design. Research questions were formulated concerning the importance of the process related variables: open process management, coownership, co-design, the application of scenarios and visualizations. Concerning the importance of the place

A two-stage optimal planning and design method for combined cooling, heat and power microgrid system

International Nuclear Information System (INIS)

Guo, Li; Liu, Wenjian; Cai, Jiejin; Hong, Bowen; Wang, Chengshan

2013-01-01

Highlights: • A two-stage optimal method is presented for CCHP microgrid system. • Economic and environmental performance are considered as assessment indicators. • Application case demonstrates its good economic and environmental performance. - Abstract: In this paper, a two-stage optimal planning and design method for combined cooling, heat and power (CCHP) microgrid system was presented. The optimal objective was to simultaneously minimize the total net present cost and carbon dioxide emission in life circle. On the first stage, multi-objective genetic algorithm based on non-dominated sorting genetic algorithm-II (NSGA-II) was applied to solve the optimal design problem including the optimization of equipment type and capacity. On the second stage, mixed-integer linear programming (MILP) algorithm was used to solve the optimal dispatch problem. The approach was applied to a typical CCHP microgrid system in a hospital as a case study, and the effectiveness of the proposed method was verified

Enterprise Architecture Planning in developing A planning Information System: a Case Study of Semarang State University

Directory of Open Access Journals (Sweden)

Budiman Kholiq

2018-01-01

Full Text Available This research has applied an integrated design and development of planning information system, which is been designed using Enterprise Architecture Planning. Frequent discrepancy between planning and realization of the budget that has been made, resulted in ineffective planning, is one of the reason for doing this research. The design using EAP aims to keep development aligned and in line with the strategic direction of the organization. In the practice, EAP is carried out in several stages of the planning initiation, identification and definition of business functions, proceeded with architectural design and EA implementation plan that has been built. In addition to the design of the Enterprise Architecture, this research carried out the implementation, and was tested by several methods of black box and white box. Black box testing method is used to test the fundamental aspects of the software, tested by two kinds of testing, first is using User Acceptance Testing and the second is using software functionality testing. White box testing method is used to test the effectiveness of the code in the software, tested using unit testing. Tests conducted using white box and black box on the integrated planning information system, is declared successful. Success in the software testing can not be ascertained if the software built has not shown any distinction from prior circumstance to the development of this integrated planning information system. For ensuring the success of this system implementation, the authors test consistency between the planning of data and the realization of prior-use of the information system, until after-use information system. This consistency test is done by reducing the time data of the planning and realization time. From the tabulated data, the planning information system that has been built reduces the difference between the planning time and the realization time, in which indicates that the planning information system

Enterprise Architecture Planning in developing A planning Information System: a Case Study of Semarang State University

Science.gov (United States)

Budiman, Kholiq; Prahasto, Toni; Kusumawardhani, Amie

2018-02-01

This research has applied an integrated design and development of planning information system, which is been designed using Enterprise Architecture Planning. Frequent discrepancy between planning and realization of the budget that has been made, resulted in ineffective planning, is one of the reason for doing this research. The design using EAP aims to keep development aligned and in line with the strategic direction of the organization. In the practice, EAP is carried out in several stages of the planning initiation, identification and definition of business functions, proceeded with architectural design and EA implementation plan that has been built. In addition to the design of the Enterprise Architecture, this research carried out the implementation, and was tested by several methods of black box and white box. Black box testing method is used to test the fundamental aspects of the software, tested by two kinds of testing, first is using User Acceptance Testing and the second is using software functionality testing. White box testing method is used to test the effectiveness of the code in the software, tested using unit testing. Tests conducted using white box and black box on the integrated planning information system, is declared successful. Success in the software testing can not be ascertained if the software built has not shown any distinction from prior circumstance to the development of this integrated planning information system. For ensuring the success of this system implementation, the authors test consistency between the planning of data and the realization of prior-use of the information system, until after-use information system. This consistency test is done by reducing the time data of the planning and realization time. From the tabulated data, the planning information system that has been built reduces the difference between the planning time and the realization time, in which indicates that the planning information system can motivate the

Mastering the Maestro: The Effective Maestro Asks Writers, Photographers, and Designers to Trade Places with Readers as They Plan.

Science.gov (United States)

Cripe, Dennis

1998-01-01

Considers two very different fictional high school newspaper editorships to see how the "maestro" process works. Notes that the process is a management technique similar to brainstorming but in which one person keeps the planning meeting focused. Suggests that the effective maestro asks writers, photographers, and designers to trade places with…

An internet tool for creation of cancer survivorship care plans for survivors and health care providers: design, implementation, use and user satisfaction.

Science.gov (United States)

Hill-Kayser, Christine E; Vachani, Carolyn; Hampshire, Margaret K; Jacobs, Linda A; Metz, James M

2009-09-04

Survivorship care plans have been recommended by the Institute of Medicine for all cancer survivors. We implemented an Internet-based tool for creation of individualized survivorship care plans. To our knowledge, this is the first tool of this type to be designed and made publicly accessible. To investigate patterns of use and satisfaction with an Internet-based tool for creation of survivorship care plans. OncoLife, an Internet-based program for creation of survivorship care plans, was designed by a team of dedicated oncology nurses and physicians at the University of Pennsylvania. The program was designed to provide individualized, comprehensive health care recommendations to users responding to queries regarding demographics, diagnosis, and cancer treatments. After being piloted to test populations, OncoLife was made publicly accessible via Oncolink, a cancer information website based at the University of Pennsylvania which averages 3.9 million page views and over 385,000 unique visits per month. Data entered by anonymous public users was maintained and analyzed. From May 2007 to November 2008, 3343 individuals utilized this tool. Most (63%) identified themselves as survivors, but also health care providers (25%) and friends/family of survivors (12%). Median age at diagnosis was 48 years (18-100+), and median current age 51 (19-100+). Most users were Caucasian (87%), female (71%), and college-educated (82%). Breast cancer was the most common diagnosis (46%), followed by hematologic (12%), gastrointestinal (11%), gynecologic (9%), and genitourinary (8%). Of all users, 84% had undergone surgery, 80% chemotherapy, and 60% radiotherapy. Half of users (53%) reported receiving follow-up care from only an oncologist, 13% only a primary care provider (PCP), and 32% both; 12% reported having received survivorship information previously. Over 90% of users, both survivors and health care providers, reported satisfaction levels of "good" to "excellent" using this tool

Remedial Design/Remedial Action Work Plan for Operable Units 6-05 and 10-04, Phase IV

Energy Technology Data Exchange (ETDEWEB)

R. P. Wells

2006-11-14

This Phase IV Remedial Design/Remedial Action Work Plan addresses the remediation of areas with the potential for UXO at the Idaho National Laboratory. These areas include portions of the Naval Proving Ground, the Arco High-Altitude Bombing Range, and the Twin Buttes Bombing Range. Five areas within the Naval Proving Ground that are known to contain UXO include the Naval Ordnance Disposal Area, the Mass Detonation Area, the Experimental Field Station, The Rail Car Explosion Area, and the Land Mine Fuze Burn Area. The Phase IV remedial action will be concentrated in these five areas. For other areas, such as the Arco High-Altitude Bombing Range and the Twin Buttes Bombing Range, ordnance has largely consisted of sand-filled practice bombs that do not pose an explosion risk. Ordnance encountered in these areas will be addressed under the Phase I Operations and Maintenance Plan that allows for the recovery and disposal of ordnance that poses an imminent risk to human health or the environment.

RHIC STATUS AND PLANS.

Energy Technology Data Exchange (ETDEWEB)

PILAT,R.

2002-06-02

RHIC ended successfully its second year of operation in January 2002 after a six month run with gold ions and two months of polarized proton collisions. I will review the machine performance and accomplishments, that include reaching design energy (100 GeV/u) and design luminosity during the gold run, and the first high energy (100 GeV) polarized proton collisions. I will also discuss the machine development strategy and the main performance milestones. The goals and plans for the shutdown and the nest run, scheduled to start in November 2002 have been the focus of a RHIC Retreat in March 2002. I will summarize findings and plans for the upcoming run and outline a vision for the nest few years of RHIC operation and upgrades.

Planning for agroforestry

NARCIS (Netherlands)

Budd, W.W.; Duchhart, I.; Hardesty, L.N.; Steiner, F.

1990-01-01

In this book a selection of contributions to the international symposium "Planning for agroforestry", held at Washington State University on April 24-27, 1989, is published. First the planning for agroforestry and agroforestry diagnosis and design is viewed over. Then the planning for and

Space-time information analysis for resource-conscious urban planning and design: A stakeholder based identification of urban metabolism data gaps

NARCIS (Netherlands)

Voskamp, I.M.; Spiller, M.; Stremke, S.; Bregt, A.K.; Vreugdenhil, L.C.; Rijnaarts, H.H.M.

2018-01-01

The research presented here examined at which spatial and temporal resolution urban metabolism should be analysed to generate results that are useful for implementation of urban planning and design interventions aiming at optimization of resource flows. Moreover, it was researched whether a lack of

Energy modulated electron therapy: Design, implementation, and evaluation of a novel method of treatment planning and delivery

Science.gov (United States)

Al-Yahya, Khalid

Energy modulated electron therapy (EMET) is a promising treatment modality that has the fundamental capabilities to enhance the treatment planning and delivery of superficially located targets. Although it offers advantages over x-ray intensity modulated radiation therapy (IMRT), EMET has not been widely implemented to the same level of accuracy, automation, and clinical routine as its x-ray counterpart. This lack of implementation is attributed to the absence of a remotely automated beam shaping system as well as the deficiency in dosimetric accuracy of clinical electron pencil beam algorithms in the presence of beam modifiers and tissue heterogeneities. In this study, we present a novel technique for treatment planning and delivery of EMET. The delivery is achieved using a prototype of an automated "few leaf electron collimator" (FLEC). It consists of four copper leaves driven by stepper motors which are synchronized with the x-ray jaws in order to form a series of collimated rectangular openings or "fieldlets". Based on Monte Carlo studies, the FLEC has been designed to serve as an accessory tool to the current accelerator equipment. The FLEC was constructed and its operation was fully automated and integrated with the accelerator through an in-house assembled control unit. The control unit is a portable computer system accompanied with customized software that delivers EMET plans after acquiring them from the optimization station. EMET plans are produced based on dose volume constraints that employ Monte Carlo pre-generated and patient-specific kernels which are utilized by an in-house developed optimization algorithm. The structure of the optimization software is demonstrated. Using Monte Carlo techniques to calculate dose allows for accurate modeling of the collimation system as well as the patient heterogeneous geometry and take into account their impact on optimization. The Monte Carlo calculations were validated by comparing them against output

Vision, Plan and Reality

DEFF Research Database (Denmark)

Steinø, Nicolai

, the theoretical study is organized as a threefold investigation of urban design theory, planning theory, as well as urban theory. As urban design in practice must consider what the built environment should be like as well as how it is developed, it must include normative as well as procedural considerations. Thus...

Options for Parallelizing a Planning and Scheduling Algorithm

Science.gov (United States)

Clement, Bradley J.; Estlin, Tara A.; Bornstein, Benjamin D.

2011-01-01

Space missions have a growing interest in putting multi-core processors onboard spacecraft. For many missions processing power significantly slows operations. We investigate how continual planning and scheduling algorithms can exploit multi-core processing and outline different potential design decisions for a parallelized planning architecture. This organization of choices and challenges helps us with an initial design for parallelizing the CASPER planning system for a mesh multi-core processor. This work extends that presented at another workshop with some preliminary results.

40 CFR 62.10850 - Identification of Plan.

Science.gov (United States)

2010-07-01

... from existing sulfuric acid production plants as adopted by the Texas Air Control Board (TACB) on May... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Texas Plan for... Identification of Plan. (a) Identification of plan. Texas Plan for Control of Designated Pollutants from Existing...

Integration of social vulnerability into emergency management plans: designing of evacuation routes against flood disasters

Science.gov (United States)

Aroca-Jimenez, Estefanía; Bodoque, Jose Maria; Garcia, Juan Antonio; Diez-Herrero, Andres

2017-04-01

Flash floods are highly spatio-temporal localized flood events characterized by reaching a high peak flow in a very short period of time, i.e., generally with times of concentration lower than six hours. Its short duration, which limits or even voids any warning time, means that flash floods are considered to be one of the most destructive natural hazards with the greatest capacity to generate risk, either in terms of the number of people affected globally or the proportion of individual fatalities. The above highlights the importance of a realistic and appropriate design of evacuation strategies in order to reduce flood-related losses, being evacuation planning considered of critical importance for disaster management. Traditionally, evacuation maps have been based on flood-prone areas, shelters or emergency residences location and evacuation routes information. However, evacuation plans rarely consider the spatial distribution of vulnerable population (i.e., people with special needs, mobility constraints or economic difficulties), which usually require assistance from emergency responders. The goal of this research is to elaborate an evacuation map against the occurrence of flash floods by combining geographic information (e.g. roads, health facilities location, sanitary helicopters) and social vulnerability patterns, which are previously obtained from socioeconomic variables (e.g. population, unemployment, dwelling characteristics). To do this, ArcGis Network Analyst tool is used, which allows to calculate the optimal evacuation routes. The methodology proposed here is implemented in the region of Castilla y León (94,230 km2). Urban areas prone to flash flooding are identified taking into account the following requirements: i) city centers are crossed by rivers or streams with a longitudinal slope higher than 0.01 m m-1; ii) city centers are potentially affected by flash floods; and iii) city centers are affected by an area with low or exceptional probability

Nissei incas system (FP-Plan) which databased the skilled sense and experiences in molding metal design. Kanagata sekkei ni okeru kan ya keiken wo data base kashita Nissei incas system (FP-plan)

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, K. (Nissei Plastic Industrial Co. Ltd., Nagano (Japan))

1992-01-01

Mold System Department of Nissei Resin Industies Co. has developed NISSEI INCAS SYSTEM, which is a CAD/CAM/CAE system specially for injection metal molding. Generally, high analysis methods such as flow analysis method have been considered for CAE, though, when making it to be linked with designing works for injection molding metals, economic conditions will not make a balance. Since authors have judged that to make an accurate mold metal drawing more quickly, before adopting such kind of flow analysis, more inportant and fundamental problems might be remained, they have started to develope their own system called FP-PLAN. This system, for example, is a software, which paying mainly attention to the most important and common problems for molding metal design to be solved, such as setting of shrinking factor, gate and runner design, estimation of cavity inside pressure, etc. Specially, they have developed only small molding products (product volume shall be under 200 cm {sup 3}). In this report, outlines of FP-PLAN such as the characteristics and programs have been intrduced. 4 figs., 2 tabs.

Model Development and Process Analysis for Lean Cellular Design Planning in Aerospace Assembly and Manufacturing

Science.gov (United States)

Hilburn, Monty D.

Successful lean manufacturing and cellular manufacturing execution relies upon a foundation of leadership commitment and strategic planning built upon solid data and robust analysis. The problem for this study was to create and employ a simple lean transformation planning model and review process that could be used to identify functional support staff resources required to plan and execute lean manufacturing cells within aerospace assembly and manufacturing sites. The lean planning model was developed using available literature for lean manufacturing kaizen best practices and validated through a Delphi panel of lean experts. The resulting model and a standardized review process were used to assess the state of lean transformation planning at five sites of an international aerospace manufacturing and assembly company. The results of the three day, on-site review were compared with baseline plans collected from each of the five sites to determine if there analyzed, with focus on three critical areas of lean planning: the number and type of manufacturing cells identified, the number, type, and duration of planned lean and continuous kaizen events, and the quantity and type of functional staffing resources planned to support the kaizen schedule. Summarized data of the baseline and on-site reviews was analyzed with descriptive statistics. ANOVAs and paired-t tests at 95% significance level were conducted on the means of data sets to determine if null hypotheses related to cell, kaizen event, and support resources could be rejected. The results of the research found significant differences between lean transformation plans developed by site leadership and plans developed utilizing the structured, on-site review process and lean transformation planning model. The null hypothesis that there was no difference between the means of pre-review and on-site cell counts was rejected, as was the null hypothesis that there was no significant difference in kaizen event plans. These

Study on engineering technologies in the Mizunami Underground Research Laboratory (FY 2015). Development of design and construction planning and countermeasure technologies (Contract research)

International Nuclear Information System (INIS)

Toguri, Satohito; Kobayashi, Shinji; Tsuji, Masakuni; Yahagi, Ryoji; Yamada, Toshiko; Matsui, Hiroya; Mikake, Shinichiro; Aoyagi, Yoshiaki; Sato, Toshinori

2017-03-01

The study on engineering technology in the Mizunami Underground Research Laboratory (MIU) project roughly consists of (1)development of design and construction planning technologies, (2)development of construction technology, (3)development of countermeasure technology, (4)development of technology for security, and (5) development of technologies regarding restoration and mitigating of the excavation effect. So far, the verification of the initial design based on the data obtained during excavation was mainly conducted as a research in the Construction Phase, also the countermeasure technologies to control groundwater inflow were examined as a research in the Operation Phase. In FY2015, as a part of the important issues on the research program, “Development of countermeasure technologies for reducing groundwater inflow” in the Japan Atomic Energy Agency 3rd Midterm Plan, water-tight grouting method has been developed. Grouting methods utilized in the MIU were evaluated and the post-excavation grouting at the -500m Access/Research Gallery-South was planned based on these evaluation results. Also, technology development from the viewpoint of geological disposal was summarized, and information on the alternative method to the grouting method was collected and organized. (author)

Designing of network planning system for small-scale manufacturing

Science.gov (United States)

Kapulin, D. V.; Russkikh, P. A.; Vinnichenko, M. V.

2018-05-01

The paper presents features of network planning in small-scale discrete production. The procedure of explosion of the production order, considering multilevel representation, is developed. The software architecture is offered. Approbation of the network planning system is carried out. This system allows carrying out dynamic updating of the production plan.

Quality Affordable Housing: A Theoretical Framework for Planning and Design of Quality Housing

Directory of Open Access Journals (Sweden)

Noor Sharipah Sultan Sidi

2011-10-01

Full Text Available The provision of adequate, good or quality housing for the population has always been a major challenge and task for most nations in the world particularly the developing countries. As such various measures have been undertaken towards this end. However, the major constraint or problem in this respect has always been in defining the criteria for quality housing and establishing the standards of quality housing particularly with respect to the parameters in the determination of quality as some of the parameters are subjective and contextual such as psychological, cultural and environmental aspects. This paper is aimed at discussing the concept of quality housing and establishing the parameters and theoretical framework which can be used by researchers, town planners, architects, policy makers and others in the formulation of criteria / guidelines for the planning and design of quality housing.

Impact of Globalization on Higher Education: An Empirical Study of Education Policy & Planning of Design Education in Hong Kong

Science.gov (United States)

Lam, Yan Yan

2010-01-01

This paper focuses on the impact of globalization in the domain of higher education, particularly, design education. It reviews how globalization may affect educational policy and planning in Hong Kong by drawing on an empirical study involving senior management, a course leader and a design trainer/facilitator. This paper not only illustrates the…

Planning ideology and geographic thought in the early twentieth century: Charles Whitnall's progressive era park designs for socialist Milwaukee.

Science.gov (United States)

Platt, Lorne A

2010-01-01

As Milwaukee’s chief park planner in the early to mid-twentieth century, Charles Whitnall responded to the various underlying ideologies of the period within which he worked. His preference for parks was a political and physical response to and remedy for the industrialized and heavily congested city he called home. By examining the Progressive Era discourse associated with planning, this article situates Whitnall’s work within the political, aesthetic, and environmental contexts of geographic thought that influenced his plans for Milwaukee. In promoting a physical awareness associated with the natural features of the region and responding to the sociopolitical framework of contemporaries such as Ebenezer Howard, Whitnall incorporated a sense of compassion within his planning. He responded to the preexisting beer gardens of Pabst and Schlitz, as well as Olmsted-designed park spaces, by advocating for decentralization as part of a broader socialist agenda that had swept through Milwaukee during the early 1900s.

Study on Strategic Planning of Road and Bridge Infrastructure Development in City Planning: Taking Porto-novo City of Benin Republic as Example

Directory of Open Access Journals (Sweden)

Boko-haya Dossa Didier

2018-01-01

Full Text Available Concern about the townlet infrastructure construction in developing country is one of the crucial part of county town planning and development. By taking the overall planning and design in a case study of Porto-novo city at Republic of Benin, this paper analyzes the characteristics and opportunities of Porto-novo city and puts forward corresponding infrastructure construction strategy. In the end, the paper comes up with specific plan of planning and design under the background of Porto-novo's planning of development strategy.

Activities pattern of planned settlement’s residence and its influence toward settlement design

Science.gov (United States)

Nirfalini Aulia, Dwira

2018-03-01

Everyday activity of residents in a housing area will create activities pattern. Utilization of public spaces in a housing area with repeating activities pattern will affect the design of public spaces. Changes in public space usage in a housing area happen as a result of residents’ activities pattern. The goal of this paper is to identify residents’ activity pattern and connect its influence towards public spaces utilization in planned housing in micro and urban area in macro. Housing residents classified into four respondent groups based on marriage status which is unmarried, single parents, the family without child and family with a child. The method used in this research is the qualitative descriptive approach. Research finding showed that housing area with housing facilities capable of creating happiness and convenience for its residents doing their activities in public spaces.

Equipment concept design and development plans for microgravity science and applications research on space station: Combustion tunnel, laser diagnostic system, advanced modular furnace, integrated electronics laboratory

Science.gov (United States)

Uhran, M. L.; Youngblood, W. W.; Georgekutty, T.; Fiske, M. R.; Wear, W. O.

1986-01-01

Taking advantage of the microgravity environment of space NASA has initiated the preliminary design of a permanently manned space station that will support technological advances in process science and stimulate the development of new and improved materials having applications across the commercial spectrum. Previous studies have been performed to define from the researcher's perspective, the requirements for laboratory equipment to accommodate microgravity experiments on the space station. Functional requirements for the identified experimental apparatus and support equipment were determined. From these hardware requirements, several items were selected for concept designs and subsequent formulation of development plans. This report documents the concept designs and development plans for two items of experiment apparatus - the Combustion Tunnel and the Advanced Modular Furnace, and two items of support equipment the Laser Diagnostic System and the Integrated Electronics Laboratory. For each concept design, key technology developments were identified that are required to enable or enhance the development of the respective hardware.

Ice condenser experimental plan

International Nuclear Information System (INIS)

Kannberg, L.D.; Piepel, G.F.; Owczarski, P.C.; Liebetrau, A.M.

1986-01-01

An experimental plan is being developed to validate the computer code ICEDF. The code was developed to estimate the extent of aerosol retention in the ice compartments of pressurized water reactor ice condenser containment systems during severe accidents. The development of the experimental plan began with review of available information on the conditions under which the code will be applied. Computer-generated estimates of thermohydraulic and aerosol conditions entering the ice condenser were evaluated and along with other information, used to generate design criteria. The design criteria have been used for preliminary test assembly design and for generation of statistical test designs. Consideration of the phenomena to be evaluated in the testing program, as well as equipment and measurement limitations, have led to changes in the design criteria and to subsequent changes in the test assembly design and statistical test design. The overall strategy in developing the experimental plan includes iterative generation and evaluation of candidate test designs using computer codes for statistical test design and ICEDF for estimation of experimental results. Estimates of experimental variability made prior to actual testing will be verified by replicate testing at preselected design points

Valid knowledge for the professional design of large and complex design processes

NARCIS (Netherlands)

Aken, van J.E.

2004-01-01

The organization and planning of design processes, which we may regard as design process design, is an important issue. Especially for large and complex design-processes traditional approaches to process design may no longer suffice. The design literature gives quite some design process models. As

Planning and installing micro-hydro systems a guide for designers, installers and engineers

CERN Document Server

Elliott, Chris

2014-01-01

An essential addition to the Earthscan Planning & Installing series, Planning and Installing Micro-Hydro Systems provides vital diagrams, pictures and tables detailing the planning and installing of a micro-hydro system, including information on the maintenance and economics once an installation is running. The book covers subjects such as measuring head and flow, ecological impacts, scheme layouts, practical advice, calculations and turbine choice. Archimedes screws are also covered in detail, as well as the main conventional choices relevant to small sites.Micro-hydro refers to hydropower sy

Final disposal of spent nuclear fuel in Sweden. Some unresolved issues and challenges in the design and implementation of the forthcoming planning and EIA processes

International Nuclear Information System (INIS)

Bjarnadottir, H.; Hilding-Rydevik, T.

2001-06-01

The aim of the study is to highlight some unresolved and challenging issues in the forthcoming approximately six year long Environmental Impact Assessment (EIA) and planning process of the long-term disposal of spent nuclear fuel in Sweden. Different international and Nordic experiences of the processes for final disposal as well as from other development of similar scope, where experiences assumed to be of importance for final disposal of nuclear waste, have been described. Furthermore, issues relating to 'good EIA practice' as well as certain aspects of planning theory have also been presented. The current Swedish situation for the planning and EIA process of the final disposal of spent nuclear fuel was also been summarized. These different 'knowledge areas' have been compared and measured against our perception of the expectations towards the forthcoming process, put forward by different Swedish actors in the field. The result is a presentation of a number of questions and identification issues that the authors consider need special attention in the design and conduction of the planning and EIA process. The study has been realized through a literature survey and followed by reading and analysis of the written material. The main focus of the literature search was on material describing planning processes, actor perspectives and EIA. Material and literature on the technical and scientific aspects of spent nuclear fuel disposal was however deliberately avoided. There is a wealth of international and Swedish literature concerning final disposal of spent nuclear fuel - concerning both technical issues and issues concerning for example public participation and risk perception. But material of a more systematic and comparative nature (relating to both empirical and theoretical issues, and to practical experiences) in relation to EIA processes and communicative planning for final disposal of spent nuclear fuel seems to be more sparsely represented. Our perception of

Operations planning for Space Station Freedom - And beyond

Science.gov (United States)

Gibson, Stephen S.; Martin, Thomas E.; Durham, H. J.

1992-01-01

The potential of automated planning and electronic execution systems for enhancing operations on board Space Station Freedom (SSF) are discussed. To exploit this potential the Operations Planning and Scheduling Subsystem is being developed at the NASA Johnson Space Center. Such systems may also make valuable contributions to the operation of resource-constrained, long-duration space habitats of the future. Points that should be considered during the design of future long-duration manned space missions are discussed. Early development of a detailed operations concept as an end-to-end mission description offers a basis for iterative design evaluation, refinement, and option comparison, particularly when used with an advanced operations planning system capable of modeling the operations and resource constraints of the proposed designs.

Task 9. Deployment of photovoltaic technologies: co-operation with developing countries. PV for rural electrification in developing countries - Programme design, planning and implementation

Energy Technology Data Exchange (ETDEWEB)

Parker, W. [Institute for Sustainable Power, Highlands Ranch, CO (United States); Oldach, R.; Wilshaw, A. [IT Power Ltd, The Manor house, Chineham (United Kingdom)

2003-09-15

This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the design, planning and implementation of PV programmes. The guide contains details on the preparation for PV programmes, including the assessment of needs, stakeholder consultation, social context analysis, supply options and national policy considerations. The establishment of goals, delivery modes, timelines, logistics and quality assurance are discussed. Further, the implementation, monitoring and evaluation of PV programmes is discussed, as are a number of methodologies that have been developed with the aim of improving programme design and implementation. The guide highlights issues pertinent to rural energy programmes in developing countries and leads programme administrators through the process of planning, implementing and evaluating a PV programme.

Hyperthermia treatment planning

International Nuclear Information System (INIS)

Lagendijk, J.J.W.

2000-01-01

The development of hyperthermia, the treatment of tumours with elevated temperatures in the range of 40-44 deg. C with treatment times over 30 min, greatly benefits from the development of hyperthermia treatment planning. This review briefly describes the state of the art in hyperthermia technology, followed by an overview of the developments in hyperthermia treatment planning. It particularly highlights the significant problems encountered with heating realistic tissue volumes and shows how treatment planning can help in designing better heating technology. Hyperthermia treatment planning will ultimately provide information about the actual temperature distributions obtained and thus the tumour control probabilities to be expected. This will improve our understanding of the present clinical results of thermoradiotherapy and thermochemotherapy, and will greatly help both in optimizing clinical heating technology and in designing optimal clinical trials. (author)

Comments and responses on the Remedial Action Plan and site design for stabilization of the Inactive Uranium Mill Tailings Site, Grand Junction, Colorado. Revision 1

International Nuclear Information System (INIS)

1994-01-01

This report contains information concerning public comments and responses on the remedial action plan and site design for stabilization of the inactive uranium mill tailings site in Grand Junction, Colorado

Life sciences payload definition and integration study. Volume 2: Requirements, design, and planning studies for the carry-on laboratories. [for Spacelab

Science.gov (United States)

1974-01-01

The task phase concerned with the requirements, design, and planning studies for the carry-on laboratory (COL) began with a definition of biomedical research areas and candidate research equipment, and then went on to develop conceptual layouts for COL which were each evaluated in order to arrive at a final conceptual design. Each step in this design/evaluation process concerned itself with man/systems integration research and hardware, and life support and protective systems research and equipment selection. COL integration studies were also conducted and include attention to electrical power and data management requirements, operational considerations, and shuttle/Spacelab interface specifications. A COL program schedule was compiled, and a cost analysis was finalized which takes into account work breakdown, annual funding, and cost reduction guidelines.

Heat pump planning handbook

CERN Document Server

Bonin, Jürgen

2015-01-01

The Heat Pump Planning Handbook contains practical information and guidance on the design, planning and selection of heat pump systems, allowing engineers, designers, architects and construction specialists to compare a number of different systems and options. Including detailed descriptions of components and their functions and reflecting the current state of technology this guide contains sample tasks and solutions as well as new model calculations and planning evaluations. Also economic factors and alternative energy sources are covered, which are essential at a time of rising heat costs. T

Remedial design report and remedial action work plan for the 100-HR-3 and 100-KR-4 groundwater operable units' interim action

International Nuclear Information System (INIS)

1996-09-01

This document is a combination remedial design report and remedial action work plan for the 100-HR-3 and 100-KR-4 Operable Units (located on the Hanford Site in Richland, Washington) interim action. The interim actions described in this document represent the first of an ongoing program to address groundwater contamination in each operable unit. This document describes the design basis, provides a description of the interim action, and identifies how they will meet the requirements set forth in the interim action Record of Decision

Tree Climbing Robot Design, Kinematics and Motion Planning

CERN Document Server

Lam, Tin Lun

2012-01-01

Climbing robot is a challenging research topic that has gained much attention from researchers. Most of the robots reported in the literature are designed to climb on manmade structures, but seldom robots are designed for climbing natural environment such as trees. Trees and manmade structures are very different in nature. It brings different aspects of technical challenges to the robot design. In this book, you can find a collection of the cutting edge technologies in the field of tree-climbing robot and the ways that animals climb. It provides a valuable reference for robot designers to select appropriate climbing methods in designing tree-climbing robots for specific purposes. Based on the study, a novel bio-inspired tree-climbing robot with several breakthrough performances has been developed and presents in this book. It is capable of performing various actions that is impossible in the state-of-the-art tree-climbing robots, such as moving between trunk and branches. This book also proposes several appro...

Project W-236A, work plan for preparation of a design requirements document

International Nuclear Information System (INIS)

Groth, B.D.

1995-01-01

This work plan outlines the tasks necessary, and defines the organizational responsibilities for preparing a Design Requirements Document (DRD) for project W-236A, Multi-Function Waste Tank Facility (MWTF). A DRD is a Systems Engineering document which bounds, at a high level, the requirements of a discrete system element of the Tank Waste Remediation System (TWRS) Program. This system element is usually assigned to a specific project, in this case the MWTF. The DRD is the document that connects the TWRS program requirements with the highest level projects requirements and provides the project's link to the overall TWRS mission. The MWTF DRD effort is somewhat unique in that the project is already in detailed design, whereas a DRO is normally prepared prior to preliminary design. The MWTF design effort was initiated with a Functional Design Criteria (FDC) and a Supplemental Design Requirements Document (SDRD) bounding the high level requirements. Another unique aspect of this effort is that some of the TWRS program requirements are still in development. Because of these unique aspects of the MWTF DRD development, the MWTF will be developed from existing TWRS Program requirements and project specific requirements contained in the FDC and SDRD. The following list describes the objectives of the MWTF DRD: determine the primary functions of the tanks through a functional decomposition of the TWRS Program high level functions; allocate the primary functions to a sub-system architecture for the tanks; define the fundamental design features in terms of performance requirements for the system and subsystems; identify system interfaces and design constraints; and document the results in a DRD

Information Technology as the Main Competence in the Design of the Strategic Planning of Logistics Platforms

Directory of Open Access Journals (Sweden)

Leonardo Varella

2013-10-01

Full Text Available The creation of logistical support structures aims to help improve the performance of logistics along supply chains, a context where the Logistics Platforms have been gaining increasing prominence. A frequent difficulty in these ventures is to align strategic planning with the flow of cargo and the ability of the adjacent port areas. Aiming to contribute to the understanding of the importance of Information Technology in a Logistics Platform, this article systematize some of the operational core competencies of Logistics Platforms, inter-relating them with the strategic planning of these projects and showing their convergence to a solid information management structure. This study indicates the importance of this essential skill in the operation of a logistics enterprise and the preparation of its strategic plan, shown to be fundamental in the design of its operations, the adequacy of the enterprise to the region and to supply chains integrated into this environment.

Implications of sustainability assessment for electricity system design: The case of the Ontario Power Authority's integrated power system plan

International Nuclear Information System (INIS)

Winfield, Mark; Gibson, Robert B.; Markvart, Tanya; Gaudreau, Kyrke; Taylor, Jennifer

2010-01-01

This paper explores the results and implications of an illustrative application of a sustainability assessment framework in the design and evaluation of a major integrated power system plan. The paper examines the integrated power system plan developed by the Ontario Power Authority in 2007. The basic framework rests on a generic set of evaluation criteria reflecting basic requirements for progress towards sustainability that was adopted, reinterpreted and applied by the Authority in support of its proposed plan. In response to evident deficiencies in the Authority's work, the authors and colleagues undertook a re-examination using a more fully elaborated sustainability assessment framework, specified for application to power system planning. The results point to a plan and plan components substantially different from those proposed by the Authority. More generally, the results highlight three advantages of applying such a sustainability assessment framework: comprehensive coverage of key requirements for progress towards sustainability while ensuring careful attention to the context and concerns of the sector; emphasis on identifying plan options that avoid major trade-offs among the sustainability criteria and recognition of interactions among the social, ecological, economic and technological realms favouring options that offer multiple, mutually reinforcing and lasting benefits.

Account planning: applying an advertising discipline to health communication and social marketing.

Science.gov (United States)

Mackert, Michael

2012-01-01

As health marketers seek new models to design campaigns, the advertising discipline of account planning offers an approach that can improve campaign development. The underlying principle of account planning is to bring the consumer perspective to all phases of campaign development, primarily through qualitative formative research. Account planners design the overall communication strategy and contribute to creative development of individual executions. The creative brief, a primary tool of account planning, is especially useful in conceptualizing campaigns. This report discusses the history and approach of account planning, followed by an example of account planning in the design of a social marketing campaign.

Solid Waste Management Planning--A Methodology

Science.gov (United States)

Theisen, Hilary M.; And Others

1975-01-01

This article presents a twofold solid waste management plan consisting of a basic design methodology and a decision-making methodology. The former provides a framework for the developing plan while the latter builds flexibility into the design so that there is a model for use during the planning process. (MA)

78 FR 16792 - Designation of Areas for Air Quality Planning Purposes; State of California; Imperial Valley...

Science.gov (United States)

2013-03-19

... (see, e.g., the PM 10 area designations in 40 CFR 81.305 for Coso Junction planning area, Owens Valley..., this action: Is not ``significant regulatory actions'' subject to review by the Office of Management..., 1999); Is not economically significant regulatory actions based on health or safety risks subject to...

Integrated conservation planning for coral reefs: Designing conservation zones for multiple conservation objectives in spatial prioritisation

Directory of Open Access Journals (Sweden)

Rafael A. Magris

2017-07-01

Full Text Available Decision-makers focus on representing biodiversity pattern, maintaining connectivity, and strengthening resilience to global warming when designing marine protected area (MPA systems, especially in coral reef ecosystems. The achievement of these broad conservation objectives will likely require large areas, and stretch limited funds for MPA implementation. We undertook a spatial prioritisation of Brazilian coral reefs that considered two types of conservation zones (i.e. no-take and multiple use areas and integrated multiple conservation objectives into MPA planning, while assessing the potential impact of different sets of objectives on implementation costs. We devised objectives for biodiversity, connectivity, and resilience to global warming, determined the extent to which existing MPAs achieved them, and designed complementary zoning to achieve all objectives combined in expanded MPA systems. In doing so, we explored interactions between different sets of objectives, determined whether refinements to the existing spatial arrangement of MPAs were necessary, and tested the utility of existing MPAs by comparing their cost effectiveness with an MPA system designed from scratch. We found that MPAs in Brazil protect some aspects of coral reef biodiversity pattern (e.g. threatened fauna and ecosystem types more effectively than connectivity or resilience to global warming. Expanding the existing MPA system was as cost-effective as designing one from scratch only when multiple objectives were considered and management costs were accounted for. Our approach provides a comprehensive assessment of the benefits of integrating multiple objectives in the initial stages of conservation planning, and yields insights for planners of MPAs tackling multiple objectives in other regions.

Non-cooperative planning theory

CERN Document Server

Bogetoft, Peter

1994-01-01

Planning in a general sense is concerned with the design of communication and decision making mechanisms in organizations where information and choice are decentralized. Non-cooperative planning theory as it is developed in this book treats the incentive aspects hereof. It stresses how strategic behavior and opportunism may impede planning, and how this can be coped with via the organization of communication and decision making, the design of information and control systems, and the development of incentive schemes. In particular, the book contains a thorough investigation of incentive provision in information production.

Collaborating With Parents of Children With Chronic Conditions and Professionals to Design, Develop and Pre-pilot PLAnT (the Parent Learning Needs and Preferences Assessment Tool).

Science.gov (United States)

Nightingale, Ruth; Wirz, Lucy; Cook, Wendy; Swallow, Veronica

This study aimed to design, develop and pre-pilot an assessment tool (PLAnT) to identify parents' learning needs and preferences when carrying out home-based clinical care for their child with a chronic condition. A mixed methods, two-phased design was used. Phase 1: a total of 10 parents/carers and 13 professionals from six UK's children's kidney units participated in qualitative interviews. Interview data were used to develop the PLAnT. Eight of these participants subsequently took part in an online survey to refine the PLAnT. Phase 2: thirteen parents were paired with one of nine professionals to undertake a pre-pilot evaluation of PLAnT. Data were analyzed using the Framework approach. A key emergent theme identifying parents' learning needs and preferences was identified. The importance of professionals being aware of parents' learning needs and preferences was recognised. Participants discussed how parents' learning needs and preferences should be identified, including: the purpose for doing this, the process for doing this, and what would the outcome be of identifying parents' needs. The evidence suggests that asking parents directly about their learning needs and preferences may be the most reliable way for professionals to ascertain how to support individual parents' learning when sharing management of their child's chronic condition. With the increasing emphasis on parent-professional shared management of childhood chronic conditions, professionals can be guided by PLAnT in their assessment of parents' learning needs and preferences, based on identified barriers and facilitators to parental learning. Copyright © 2017 Elsevier Inc. All rights reserved.

Optics Supply Planning System

International Nuclear Information System (INIS)

Gaylord, J.

2009-01-01

The purpose of this study is to specify the design for an initial optics supply planning system for NIF, and to present quality assurance and test plans for the construction of the system as specified. The National Ignition Facility (NIF) is a large laser facility that is just starting operations. Thousands of specialized optics are required to operate the laser, and must be exchanged over time based on the laser shot plan and predictions of damage. Careful planning and tracking of optic exchanges is necessary because of the tight inventory of spare optics, and the long lead times for optics procurements and production changes. Automated inventory forecasting and production planning tools are required to replace existing manual processes. The optics groups members who are expected to use the supply planning system are the stakeholders for this project, and are divided into three groups. Each of these groups participated in a requirements specification that was used to develop this design. (1) Optics Management--These are the top level stakeholdersk, and the final decision makers. This group is the interface to shot operations, is ultimately responsible for optics supply, and decides which exchanges will be made. (2) Work Center Managers--This group manages the on site optics processing work centers. They schedule the daily work center operations, and are responsible for developing long term processing, equipment, and staffing plans. (3) Component Engineers--This group manages the vendor contracts for the manufacture of new optics and the off site rework of existing optics. They are responsible for sourcing vendors, negotiating contracts, and managing vendor processes. The scope of this analysis is to describe the structure and design details of a system that will meet all requirements that were described by stakeholders and documented in the analysis model for this project. The design specifies the architecture, components, interfaces, and data stores of the system

Design of security scheme of the radiotherapy planning administration system based on the hospital information system

International Nuclear Information System (INIS)

Zhuang Yongzhi; Zhao Jinzao

2010-01-01

Objective: To design a security scheme of radiotherapy planning administration system. Methods: Power Builder 9i language was used to program the system through the model of client-server machine. Oracle 9i was used as the database server. Results In this system, user registration management, user login management, application-level functions of control, database access control, and audit trail were designed to provide system security. Conclusions: As a prototype for the security analysis and protection of this scheme provides security of the system, application system, important data and message, which ensures the system work normally. (authors)

Design and analysis of experiments with SAS

CERN Document Server

Lawson, John

2010-01-01

IntroductionStatistics and Data Collection Beginnings of Statistically Planned Experiments Definitions and Preliminaries Purposes of Experimental Design Types of Experimental Designs Planning Experiments Performing the Experiments Use of SAS SoftwareCompletely Randomized Designs with One Factor Introduction Replication and Randomization A Historical Example Linear Model for Completely Randomized Design (CRD) Verifying Assumptions of the Linear Model Analysis Strategies When Assumptions Are Violated Determining the Number of Replicates Comparison of Treatments after the F-TestFactorial Designs

Groundwater regulation and integrated planning

Science.gov (United States)

Quevauviller, Philippe; Batelaan, Okke; Hunt, Randall J.

2016-01-01

The complex nature of groundwater and the diversity of uses and environmental interactions call for emerging groundwater problems to be addressed through integrated management and planning approaches. Planning requires different levels of integration dealing with: the hydrologic cycle (the physical process) including the temporal dimension; river basins and aquifers (spatial integration); socioeconomic considerations at regional, national and international levels; and scientific knowledge. The great natural variation in groundwater conditions obviously affects planning needs and options as well as perceptions from highly localised to regionally-based approaches. The scale at which planning is done therefore needs to be carefully evaluated against available policy choices and options in each particular setting. A solid planning approach is based on River Basin Management Planning (RBMP), which covers: (1) objectives that management planning are designed to address; (2) the way various types of measures fit into the overall management planning; and (3) the criteria against which the success or failure of specific strategies or interventions can be evaluated (e.g. compliance with environmental quality standards). A management planning framework is to be conceived as a “living” or iterated document that can be updated, refined and if necessary changed as information and experience are gained. This chapter discusses these aspects, providing an insight into European Union (EU), United States and Australia groundwater planning practices.

Comparison of RapidArc plans and fixed field intensity modulated radiotherapy planning in cervical cancer radiotherapy

International Nuclear Information System (INIS)

Liu Xiangyu; Liu Xianfeng; He Ya'nan; Yin Wenjuan; Wu Yongzhong

2011-01-01

Objective: To explore the advantages and disadvantages between the RapidArc plans and fixed-field IMRT plan (IMRT). Methods: Ten cases of cervical cancer,aged 55 (36-70), who were to receive post-operative radiotherapy were selected randomly. Single arc (Arc 1), two arcs (Arc 2), and three arc (Arc 3) RapidArc plans and fixed-field IMRT plan were designed respectively in the Eclipse 8.6 planning system. The designing, treatment time, target area, and dose distribution of organs at risk by these 4 planning techniques were compared. Results: The values of average planned treatment time by the Arc 1, Arc 2, and Arc 3 ten cases was 98, 155, 185, and 46 min, respectively. The values of average treatment time in the Varian IX accelerator were 2.15, 3.32, 4.48, and 6.95 min, respectively. The average mean doses were (48.99±1.08),(49.40±0.51), (49.51±0.62), and (48.65±0.92) Gy, respectively. The values of homogeneity index (HI) of target were 1.11±0.07, 1.07±0.02, 1.06±0.02, and 1.12±0.05, respectively. The values of conformal index (CI) of target were 0.73±0.13, 0.87±0.06, 0.87±0.06, and 0.79±0.06, respectively. The doses at rectum, bladder, and small intestine calculated by IMRT plan were the lowest, and the doses at the femoral neck calculated by these 4 plans were similar. Conclusions: The RapidArc plan is superior in dose distribution at target, HI, CI, and treatment time to IMRT, but IMRT plan is superior to RapidArc in planned dose calculation time and protection of organs at risk. However, in general, the RapidArc plan is better in clinical application than IMRT plan. (authors)

Develop a Professional Learning Plan

Science.gov (United States)

Journal of Staff Development, 2013

2013-01-01

A professional learning plan establishes short-and long-term plans for professional learning and implementation of the learning. Such plans guide individuals, schools, districts, and states in coordinating learning experiences designed to achieve outcomes for educators and students. Professional learning plans focus on the program of educator…

Internet plan and planning

Directory of Open Access Journals (Sweden)

Kahriman Emina

2008-01-01

Full Text Available Paper discuss specific features of internet plan as well as planning as management process in general in the contemporary environment. No need to stress out that marketing plan and marketing planning is core activity in approaching to market. At the same time, there are a lot specific c request in preparing marketing plan comparing to business planning due to marketing plan is an essential part. The importance of internet plan and planning rely on specific features of the internet network but as a part of general corporate as well as marketing strategy.

Remedial action plan and site conceptual design for stabilization of the inactive uranium mill tailings sites at Rifle, Colorado. Appendix D, Final report

International Nuclear Information System (INIS)

1992-02-01

This appendix assesses the present conditions and data gathered about the two designated inactive uranium mill tailings sites near Rifle, Colorado, and the proposed disposal site six miles north of Rifle in the area of Estes Gulch. It consolidates available engineering, radiological, geotechnical, hydrological, meteorological, and other information pertinent to the design of the Remedial Action Plan (RAP). The data characterize conditions at the mill, tailings, and disposal site so that the Remedial Action Contractor (RAC) may complete final designs for the remedial actions

Remedial action plan and site conceptual design for stabilization of the inactive uranium mill tailings sites at Rifle, Colorado. Appendix D, Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-02-01

This appendix assesses the present conditions and data gathered about the two designated inactive uranium mill tailings sites near Rifle, Colorado, and the proposed disposal site six miles north of Rifle in the area of Estes Gulch. It consolidates available engineering, radiological, geotechnical, hydrological, meteorological, and other information pertinent to the design of the Remedial Action Plan (RAP). The data characterize conditions at the mill, tailings, and disposal site so that the Remedial Action Contractor (RAC) may complete final designs for the remedial actions.

40 CFR 62.9611 - Identification of plan-Pennsylvania.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Identification of plan-Pennsylvania. 62... (CONTINUED) APPROVAL AND PROMULGATION OF STATE PLANS FOR DESIGNATED FACILITIES AND POLLUTANTS Pennsylvania...—Pennsylvania. (a) Title of Plan. Commonwealth of Pennsylvania Plan under section 111(d) for Designated...