WorldWideScience

Sample records for pinus radiata timber

  1. Visual Grading and Structural Properties Assessment of Large Cross-Section Pinus radiata D. Don Timber

    Directory of Open Access Journals (Sweden)

    Eva Hermoso Prieto

    2016-04-01

    Full Text Available The use of large cross-section timber for structural purposes has increased in Spain, and knowledge of its properties is strategically necessary. The Spanish visual strength-grading standard UNE 56544 (2011 efficiency applied to large cross-section structural timber was analyzed using a sample of 363 specimens of radiata pine (Pinus radiata D. Don. from the Basque Country and Catalonia, Spain. Different sizes were tested (80 × 120 × 2400 mm3, 150 × 250 × 5600 mm3, 150 × 250 × 4300 mm3, and 200 × 250 × 5000 mm3. Bending strength, modulus of elasticity, and density were obtained, and characteristic values were determined in order to assign strength class according to European standard EN 338 (2010. Knots and twists were the most relevant singularities for visual strength grading. It was concluded that large cross-section Spanish radiata pine timber was suitable for structures, and it was assigned to the C20 strength class.

  2. Flight Dynamics and Abundance of Ips sexdentatus (Coleoptera: Curculionidae: Scolytinae in Different Sawmills from Northern Spain: Differences between Local Pinus radiata (Pinales: Pinaceae and Southern France Incoming P. pinaster Timber

    Directory of Open Access Journals (Sweden)

    Sergio López

    2012-01-01

    Full Text Available In January 2009, the windstorm “Klaus” struck the southern part of France, affecting 37.9 million m3 of maritime pine Pinus pinaster Aiton (Pinales: Pinaceae. This breeding plant material favored the outbreak of Ips sexdentatus (Börner (Coleoptera: Curculionidae: Scolytinae. As much of this timber is imported to the Basque Country (northern Spain, a potential risk to conifer stands is generated, due to the emergence of the incoming beetles. Thus, flight dynamics and beetle abundance were compared in different sawmills, according to the timber species (either local P. radiata D. Don or imported P. pinaster. A maximum flight peak of I. sexdentatus was observed in mid-June in P. pinaster importing sawmills, whereas a second lighter peak occurred in September. In contrast, only a maximum peak in mid-June was observed in P. radiata inhabiting beetles, being significantly smaller than in local P. pinaster trading sawmills. In addition, significant differences were found between imported P. pinaster and P. radiata regarding the number of insects beneath the bark. The development of IPM strategies for controlling I. sexdentatus populations is recommended, due to the insect abundance found in P. pinaster imported timber.

  3. 90SR uptake by Pinus ponderosa and Pinus radiata seedlings inoculated with ectomycorrhizal fungi

    International Nuclear Information System (INIS)

    Entry, J.A.; Emmingham, W.H.; Rygiewicz, P.T.

    1994-01-01

    Strontium-90 ( 90 Sr) is a radionuclide characteristic of fallout from nuclear reactor accidents and nuclear weapons testing. Prior studies have shown that Pinus ponderosa and P. radiata seedlings can remove appreciable quantities of 90 Sr from soil and store it in plant tissue. In this study, we inoculated P. ponderosa and P. radiata seedlings with one of five isolates of ectomycorrhizal fungi. Inoculated and noninoculated (control) seedlings were compared for their ability to remove 90 Sr from an organic growth medium. Ectomycorrhizal P. ponderosa and P. radiata seedlings are able to remove 3-5 times more 90 Sr from contaminated soil than seedlings without ectomycorrhizae. (Author)

  4. Biocontrol of Fusarium circinatum Infection of Young Pinus radiata Trees

    Directory of Open Access Journals (Sweden)

    Eugenia Iturritxa

    2017-01-01

    Full Text Available Pitch canker, caused by the fungus Fusarium circinatum, is a major disease of Pinus radiata currently controlled to some extent in nurseries by good hygiene and application of synthetic fungicides. The aim of this study was to evaluate alternative strategies to control fungal infections in nurseries and young pine plantations. The antagonistic effects of biocontrol bacteria and essential oils against F. circinatum in vitro and in young P. radiata trees were assessed. Pseudomonas fluorescens, Erwinia billingiae, and Bacillus simplex reduced the growth of the fungus in vitro by 17%–29%, and decreased the density of the mycelial mat. In young P. radiata trees, the length of F. circinatum lesions was reduced by 22%–25% by the same bacterial strains. Direct application of cinnamon and/or clove essential oils to wounds in stems of two-year-old P. radiata trees also limited the damage caused by F. circinatum. Lesion length was reduced by 51% following treatment with cinnamon oil (10% v/v, and by 45% following treatment with clove oil (15% v/v or a combination of both oils. However, the oils were toxic to younger trees. The biocontrol bacteria and essential oils show promise as prophylactic treatments to reduce the devastating effects of F. circinatum on P. radiata.

  5. Identification case of evidence in timber tracing of Pinus radiate, using high-resolution melting (HRM) analysis.

    Science.gov (United States)

    Solano, Jaime; Anabalón, Leonardo; Encina, Francisco

    2016-03-01

    Fast, accurate detection of plant species and their hybrids using molecular tools will facilitate assessment and monitoring of timber tracing evidence. In this study the origin of unknown pine samples is determined for a case of timber theft in the region of Araucania southern Chile. We evaluate the utility of the trnL marker region for species identification applied to pine wood based on High Resolution Melting. This efficient tracing methods can be incorporated into forestry applications such as certification of origin. The object of this work was genotype identification using high-resolution melting (HRM) and trnL approaches for Pinus radiata (Don) in timber tracing evidence. Our results indicate that trnL is a very sensitive marker for delimiting species and HRM analysis was used successfully for genotyping Pinus samples for timber tracing purposes. Genotyping samples by HRM analysis with the trnL1 approach allowed us to differentiate two wood samples from the Pinaceae family: Pinus radiata (Don) and Pseudotsuga menziesii (Mirb.) Franco. The same approach with Pinus trnL wood was not able to discriminate between samples of Pinus radiata, indicating that the samples were genetically indistinguishable, possibly because they have the same genotype at this locus. Timber tracing with HRM analysis is expected to contribute to future forest certification schemes, control of illegal trading, and molecular traceability of Pinus spp. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  6. Time-of-Flight Adjustment Procedure for Acoustic Measurements in Structural Timber

    Science.gov (United States)

    Danbiel F. Llana; Guillermo Iñiguez-Gonzalez; Francisco Arriaga; Xiping Wang

    2016-01-01

    The effect of timber length on time-of-flight acoustic longitudinal measurements was investigated on the structural timber of four Spanish species: radiata pine (Pinus radiata D. Don), Scots pine (Pinus sylvestris L.), laricio pine (Pinus nigra Arn.), and maritime pine (Pinus pinaster Ait.). Time-of-flight longitudinal measurements were conducted on 120 specimens of...

  7. Influencia de la poda en el desarrollo de masas de Pinus radiata D. Don y Pinus pinaster Aiton en Asturias

    OpenAIRE

    Hevia Cabal, Andrea

    2013-01-01

    Esta tesis evaluó la influencia de diferentes intensidades de poda sobre el crecimiento, desarrollo y persistencia de masas regulares jóvenes de Pinus radiata D. Don y Pinus pinaster Aiton en Asturias, dentro de una selvicultura sostenible enfocada a la producción de madera de calidad.

  8. A comparison of estimation methods for fitting Weibull, Johnson's SB and beta functions to Pinus pinaster, Pinus radiata and Pinus sylvestris stands in northwest Spain

    Energy Technology Data Exchange (ETDEWEB)

    Gorgoseo, J. J.; Rojo, A.; Camara-Obregon, A.; Dieguez-Aranda, U.

    2012-07-01

    The purpose of this study was to compare the accuracy of the Weibull, Johnson's SB and beta distributions, fitted with some of the most usual methods and with different fixed values for the location parameters, for describing diameter distributions in even-aged stands of Pinus pinaster, Pinus radiata and Pinus sylvestris in northwest Spain. A total of 155 permanent plots in Pinus sylvestris stands throughout Galicia, 183 plots in Pinus pinaster stands throughout Galicia and Asturias and 325 plots in Pinus radiata stands in both regions were measured to describe the diameter distributions. Parameters of the Weibull function were estimated by Moments and Maximum Likelihood approaches, those of Johnson's SB function by Conditional Maximum Likelihood and by Knoebel and Burkhart's method, and those of the beta function with the method based on the moments of the distribution. The beta and the Johnson's SB functions were slightly superior to Weibull function for Pinus pinaster stands; the Johnson's SB and beta functions were more accurate in the best fits for Pinus radiata stands, and the best results of the Weibull and the Johnson's SB functions were slightly superior to beta function for Pinus sylvestris stands. However, the three functions are suitable for this stands with an appropriate value of the location parameter and estimation of parameters method. (Author) 44 refs.

  9. Generation and analysis of expressed sequence tags from six developing xylem libraries in Pinus radiata D. Don

    Directory of Open Access Journals (Sweden)

    Dillon Shannon K

    2009-01-01

    Full Text Available Abstract Background Wood is a major renewable natural resource for the timber, fibre and bioenergy industry. Pinus radiata D. Don is the most important commercial plantation tree species in Australia and several other countries; however, genomic resources for this species are very limited in public databases. Our primary objective was to sequence a large number of expressed sequence tags (ESTs from genes involved in wood formation in radiata pine. Results Six developing xylem cDNA libraries were constructed from earlywood and latewood tissues sampled at juvenile (7 yrs, transition (11 yrs and mature (30 yrs ages, respectively. These xylem tissues represent six typical development stages in a rotation period of radiata pine. A total of 6,389 high quality ESTs were collected from 5,952 cDNA clones. Assembly of 5,952 ESTs from 5' end sequences generated 3,304 unigenes including 952 contigs and 2,352 singletons. About 97.0% of the 5,952 ESTs and 96.1% of the unigenes have matches in the UniProt and TIGR databases. Of the 3,174 unigenes with matches, 42.9% were not assigned GO (Gene Ontology terms and their functions are unknown or unclassified. More than half (52.1% of the 5,952 ESTs have matches in the Pfam database and represent 772 known protein families. About 18.0% of the 5,952 ESTs matched cell wall related genes in the MAIZEWALL database, representing all 18 categories, 91 of all 174 families and possibly 557 genes. Fifteen cell wall-related genes are ranked in the 30 most abundant genes, including CesA, tubulin, AGP, SAMS, actin, laccase, CCoAMT, MetE, phytocyanin, pectate lyase, cellulase, SuSy, expansin, chitinase and UDP-glucose dehydrogenase. Based on the PlantTFDB database 41 of the 64 transcription factor families in the poplar genome were identified as being involved in radiata pine wood formation. Comparative analysis of GO term abundance revealed a distinct transcriptome in juvenile earlywood formation compared to other stages of

  10. Polyamine levels during the development of zygotic and somatic embryos of Pinus radiata

    Science.gov (United States)

    Rakesh Minocha; Dale R. Smith; Cathie Reeves; Kevin D. Steele; Subhash C. Minocha

    1999-01-01

    Changes in the cellular content of three polyamines (putrescine, spermidine and spermine) were compared at different stages of development in zygotic and somatic embryos of Pinus radiata D. Don. During embryo development, both the zygotic and the somatic embryos showed a steady increase in spermidine content, with either a small decrease or no...

  11. Climate as possible reproductive barrier in Pinus radiata (D. Don interspecific hybridisation

    Directory of Open Access Journals (Sweden)

    Hannél Ham

    2017-12-01

    Full Text Available Historically, interspecific hybridisation with Pinus radiata D. Don had limited success. The effect of environmental conditions and position of pollination bags in the tree were investigated as possible hybridisation barriers. The study was conducted in a P. radiata seed orchard in the Southern Cape (South Africa. Field data were compared to the climatic conditions at natural and commercial provenances of seven Mesoamerican Pinus species identified as possible hybrid partners. In vitro pollen studies were used to confirm whether interspecific crosses with P. radiata might be feasible within predefined climatic parameters. The temperature ranges for both top and northern side of P. radiata pine trees in the seed orchard was similar to the natural distribution of P. radiata, P. elliottii Engelm. and P. taeda L. in the USA. Results suggested that pollen of P. elliottii and P. taeda might be more suited to result in the successful pollination of P. radiata than the other Mesoamerican pine species tested in this study.  Furthermore, the combination of minimum temperature and precipitation also showed a closer correlation to successful hybridisation with P. radiata for both P. elliotii and P. taeda. However, pollen tube elongation studies did not support these results, suggesting that mean temperature might not be the only determining factor of hybridisation success. Three circadian temperature models that mimic natural conditions were developed for Karatara and Sabie (Tweefontein, Witklip and Spitskop.  These models will be tested in future in vitro studies to further evaluate temperature fluctuations between day and night regimes as a possible reproductive barrier limiting hybridisation success between P. radiata and other Mesoamerican pine species.

  12. Application of gamma radiation to the nodes detection in Pinus Radiata (D.Don) wood pieces

    International Nuclear Information System (INIS)

    Morales, J.R.; Dinator, Maria I; Karsulovic C, Jose T.; Leon G, Adolfo

    1996-01-01

    Attenuation of 59.5 KeV photons provided by an Am-241 source, has been used to detect knots in lumber pieces from Pinus Radiata (D.Don). It is shown that the linear attenuation coefficient is a sensitive parameter to detect singularities in the structure of this material. The scanning of the piece provides profiles which define the position and extension of the singularity. (author)

  13. Immunolocalization of IAA and ABA in roots and needles of radiata pine (Pinus radiata) during drought and rewatering.

    Science.gov (United States)

    De Diego, N; Rodríguez, J L; Dodd, I C; Pérez-Alfocea, F; Moncaleán, P; Lacuesta, M

    2013-05-01

    Anatomical, physiological and phytohormonal changes involved in drought tolerance were examined in different Pinus radiata D. Don breeds subjected to soil drying and rewatering. Breeds with the smallest stomatal chamber size had the lowest transpiration rate and the highest intrinsic water-use efficiency. Xylem cell size was positively correlated with leaf hydraulic conductance and needle indole-3-acetic acid (IAA) concentrations, whereas transpiration rate was negatively correlated with needle abscisic acid (ABA) levels. Since these two phytohormones seem important in regulating the P. radiata drought response, they were simultaneously immunolocalized in roots and needles of the most tolerant breed (P. radiata var. radiata × var. cedrosensis) during two sequential drought cycles and after rewatering. During drought, IAA was unequally distributed into the pointed area of the needle cross-section and mainly located in mesophyll and vascular tissue cells of needles, possibly inducing needle epinasty, whereas ABA was principally located in guard cells, presumably to elicit stomata closure. In the roots, at the end of the first drought cycle, while strong IAA accumulation was observed in the cortex, ABA levels decreased probably due to translocation to the leaves. Rewatering modified the distribution of both IAA and ABA in the needles, causing an accumulation principally in vascular tissue, with residual concentrations in mesophyll, likely favouring the acclimatization of the plants for further drought cycles. Contrarily, in the roots IAA and ABA were located in the exodermis, a natural barrier that regulates the phytohormone translocation to other plant tissues and hormone losses to the soil solution after rewatering. These results confirm that immunolocalization is an efficient tool to understand the translocation of IAA and ABA in plants subjected to different water stress situations, and clarify their role in regulating physiological responses such as stomata

  14. Relationship between fiber porosity and cellulose digestibility in steam-exploded Pinus radiata

    Energy Technology Data Exchange (ETDEWEB)

    Wong, K.K.Y.; Deverell, K.F.; Mackie, K.L.; Clark, T.A.; Donaldson, L.A.

    1988-04-05

    The use of lignocellulosic materials in bioconversion processes may be improved if the critical factors limiting conversion are better understood. Steam explosion after sulfur dioxide impregnation of wood chips is an effective method for improving the enzymatic digestibility of cellulose in the softwood Pinus radiata. Digestibility of pretreated fiber was progressively increased by altering the conditions of steam explosion. With increasing digestibility, there was an observed increase in fiber porosity as measured by the solute exclusion technique. Accessible pore volume and accessible surface area to a 5-nm dextran probe positively correlated with both 2- and 24-h digestion yields from pretreated fiber. The increase in accessibility was probably the result of hemicellulose extraction and lignin redistribution. A subsequent loss in accessibility, brought about by structural collapse or further lignin redistribution, resulted in a corresponding loss in digestibility. It appears that steam explosion increases cellulose digestibility in P. radiata by increasing fiber porosity.

  15. Above-ground biomass equations for Pinus radiata D. Don in Asturias

    Directory of Open Access Journals (Sweden)

    E. Canga

    2013-12-01

    Full Text Available Aim of the study: The aim of this study was to develop a model for above-ground biomass estimation for Pinus radiata D. Don in Asturias.Area of study: Asturias (NE of Spain.Material and methods: Different models were fitted for the different above-ground components and weighted regression was used to correct heteroscedasticity. Finally, all the models were refitted simultaneously by use of Nonlinear Seemingly Unrelated Regressions (NSUR to ensure the additivity of biomass equations.Research highlights: A system of four biomass equations (wood, bark, crown and total biomass was develop, such that the sum of the estimations of the three biomass components is equal to the estimate of total biomass. Total and stem biomass equations explained more than 92% of observed variability, while crown and bark biomass equations explained 77% and 89% respectively.Keywords: radiata pine; plantations; biomass.

  16. IDENTIFICACION DEL CILINDRO NUDOSO EN IMÁGENES TC DE TROZAS PODADAS DE PINUS RADIATA UTILIZANDO REDES NEURONALES ARTIFICIALES

    OpenAIRE

    Rojas Espinoza,Gerson; Ortiz Irribarren,Oscar

    2010-01-01

    La factibilidad de identificar el cilindro nudoso en imágenes de tomografía computarizada de rayos X (TC) de trozas podadas de pino radiata (Pinus radiata D. Don), fue evaluada utilizando un método de clasificación supervisada basado en Redes Neuronales Artificiales (RNA). El proceso de clasificación consideró también la identificación de la zona libre de defectos y nudos. Treinta trozas podadas de pino radiata fueron escaneadas en un escáner médico multi-slice de rayos X, donde las imágenes ...

  17. Metabolome Integrated Analysis of High-Temperature Response in Pinus radiata

    Directory of Open Access Journals (Sweden)

    Mónica Escandón

    2018-04-01

    Full Text Available The integrative omics approach is crucial to identify the molecular mechanisms underlying high-temperature response in non-model species. Based on future scenarios of heat increase, Pinus radiata plants were exposed to a temperature of 40°C for a period of 5 days, including recovered plants (30 days after last exposure to 40°C in the analysis. The analysis of the metabolome using complementary mass spectrometry techniques (GC-MS and LC-Orbitrap-MS allowed the reliable quantification of 2,287 metabolites. The analysis of identified metabolites and highlighter metabolic pathways across heat time exposure reveal the dynamism of the metabolome in relation to high-temperature response in P. radiata, identifying the existence of a turning point (on day 3 at which P. radiata plants changed from an initial stress response program (shorter-term response to an acclimation one (longer-term response. Furthermore, the integration of metabolome and physiological measurements, which cover from the photosynthetic state to hormonal profile, suggests a complex metabolic pathway interaction network related to heat-stress response. Cytokinins (CKs, fatty acid metabolism and flavonoid and terpenoid biosynthesis were revealed as the most important pathways involved in heat-stress response in P. radiata, with zeatin riboside (ZR and isopentenyl adenosine (iPA as the key hormones coordinating these multiple and complex interactions. On the other hand, the integrative approach allowed elucidation of crucial metabolic mechanisms involved in heat response in P. radiata, as well as the identification of thermotolerance metabolic biomarkers (L-phenylalanine, hexadecanoic acid, and dihydromyricetin, crucial metabolites which can reschedule the metabolic strategy to adapt to high temperature.

  18. Madera de compresión en Pinus radiata III: propiedades de pulpas kraft

    OpenAIRE

    Diaz-vaz,J.E; Ananias,R. A; Valenzuela,L; Torres,M; Rodriguez,S

    2012-01-01

    Estudios anteriores en estos mismos árboles de Pinus radiata con fustes levemente inclinados, demostraron que la madera de compresión leve que ellos exhibían presentaba: traqueidas más cortas, mayor densidad, mayor proporción de lignina, mayor proporción de extraíbles en etanol tolueno y menor proporción de alfa celulosa que la madera opuesta y que la madera de árboles sin madera de compresión. En el presente estudio se analiza las propiedades pulpables de la madera de compresión y la de sus ...

  19. Response in water yield to the thinning of Pinus radiata, Pinus patula and Eucalyptus grandis plantations

    CSIR Research Space (South Africa)

    Lesch, W

    1997-12-15

    Full Text Available . radiata plantation in the Biesievlei catchment, annual stream flow increased by between 10 and 71% (19-99 mm). These increases persisted for three and two years after the thinning, respectively. A final thinning in the same catchment removed only 22...

  20. Proanthocyanidin-rich Pinus radiata bark extract inhibits mast cell-mediated anaphylaxis-like reactions.

    Science.gov (United States)

    Choi, Yun Ho; Song, Chang Ho; Mun, Sung Phil

    2018-02-01

    Mast cells play a critical role in the effector phase of immediate hypersensitivity and allergic reactions. Pinus radiata bark extract exerts multiple biological effects and exhibits immunomodulatory and antioxidant properties. However, its role in mast cell-mediated anaphylactic reactions has not been thoroughly investigated. In this study, we examined the effects of proanthocyanidin-rich water extract (PAWE) isolated from P. radiata bark on compound 48/80-induced or antidinitrophenyl (DNP) immunoglobulin E (IgE)-mediated anaphylaxis-like reactions in vivo. In addition, we evaluated the mechanism underlying the inhibitory effect of PAWE on mast cell activation, with a specific focus on histamine release, using rat peritoneal mast cells. PAWE attenuated compound 48/80-induced or anti-DNP IgE-mediated passive cutaneous anaphylaxis-like reactions in mice, and it inhibited histamine release triggered by compound 48/80, ionophore A23187, or anti-DNP IgE in rat peritoneal mast cells in vitro. Moreover, PAWE suppressed compound 48/80-elicited calcium uptake in a concentration-dependent manner and promoted a transient increase in intracellular cyclic adenosine-3',5'-monophosphate levels. Together, these results suggest that proanthocyanidin-rich P. radiata bark extract effectively inhibits anaphylaxis-like reactions. Copyright © 2017 John Wiley & Sons, Ltd.

  1. Effect of Pinus radiata derived biochars on soil sorption and desorption of phenanthrene

    International Nuclear Information System (INIS)

    Zhang Honghua; Lin Kunde; Wang Hailong; Gan, Jay

    2010-01-01

    Biochars are anthropogenic carbonaceous sorbent and their influences on the sorption of environmental contaminants need to be characterized. Here we evaluated the effect of Pinus radiata derived biochars on soil sorption and desorption of phenanthrene. Two biochars separately produced at 350 o C and 700 o C and three soils were tested. Biochar amendment generally enhanced the soil sorption of phenanthrene. The biochar produced at 700 o C generally showed a greater ability at enhancing a soil's sorption ability than that prepared at 350 o C. The single-step desorption measurement showed an apparent hysteresis in biochar-amended soils. After 28 d equilibration, the sorptive capacity of biochar-amended soil (with an organic carbon content of 0.16%) significantly decreased. This study clearly suggested that biochar application enhanced soil sorption of hydrophobic organic compounds, but the magnitude of enhancement depended on the preparation of biochars, the indigenous soil organic carbon levels, and the contact time between soil and biochar. - Pinus radiata derived biochars influence soil sorption and desorption of phenanthrene.

  2. First report of shoot blight and dieback caused by Diplodia pinea on Pinus pinaster and P. radiata trees in Tunisia

    Directory of Open Access Journals (Sweden)

    B.T. Linaldeddu

    2009-01-01

    Full Text Available Damage caused by Diplodia pinea on Pinus pinaster and P. radiata forests are reported for the fi rst time in Tunisia. The affected plants show shoot blight, canker and branch dieback. On decaying and dead branches pycnidia of D. pinea are observed. The fungus was repeatedly isolated from the bark of symptomatic branches. The results of pathogenicity tests confirm the virulence of D. pinea and the susceptibility of both Pinus species to infection.

  3. Family-site interaction in Pinus radiata: implications for progeny testing strategy and regionalised breeding in New Zealand.

    Science.gov (United States)

    G.R. Johnson; R.D. Brudon

    1990-01-01

    A progeny test of 170 open-pollinated families from second-generation plus trees of Pinus radiata was established on four sites in New Zealand in 1981. Two test sites were on volcanic purnice soils in the Central North Island region and two were on phosphate-retentive clay soils in the Northland region.Assessments of volume growth, stem straightness, mal-...

  4. Horse grazing systems: understory biomass and plant biodiversity of a Pinus radiata stand

    Directory of Open Access Journals (Sweden)

    Antonio Rigueiro-Rodríguez

    2012-02-01

    Full Text Available Horse grazing systems may affect productivity and biodiversity of understory developed under Pinus radiata D. Don silvopastoral systems, while acting as a tool to reduce the risk of fire. This study compared continuous and rotational grazing systems effect upon biomass, fractions of stem, sprouts, leaves and woody parts of Ulex europaeus L. and alpha (Species Richness, Shannon-Wiener and beta (Jaccard and Magurran biodiversity for a period of four years in a P. radiata silvopastoral system. The experiment consisted of a randomized block design of two treatments (continuous and rotational grazing. Biomass, and species abundances were measured - biodiversity metrics were calculated based on these results for a two years of grazing and two years of post-grazing periods. Both continuous and rotational grazing systems were useful tools for reducing biomass and, therefore, fire risk. The rotational grazing system caused damage to the U. europaeus shrub, limiting its recovery once grazing was stopped. However, the more intensive grazing of U. europaeus plants under rotational had a positive effect on both alpha and beta biodiversity indexes due to the low capacity of food selection in the whole plot rather than continuous grazing systems. Biomass was not affected by the grazing system; however the rotational grazing system is more appropriate to reduce U. europaeus biomass and therefore forest fire risk at a long term and to enhance pasture biodiversity than the continuous grazing system.

  5. Phase-change related epigenetic and physiological changes in Pinus radiata D. Don.

    Science.gov (United States)

    Fraga, Mario F; Cañal, Maria Jesús; Rodríguez, Roberto

    2002-08-01

    DNA methylation and polyamine levels were analysed before and after Pinus radiata D. Don. phase change in order to identify possible molecular and physiological phase markers. Juvenile individuals (without reproductive ability) were characterised by a degree of DNA methylation of 30-35% and a ratio of free polyamines to perchloric acid-soluble polyamine conjugates greater than 1, while mature trees (with reproductive ability) had 60% 5-methylcytosine and a ratio of free polyamines to perchloric acid-soluble polyamine conjugates of less than 1. Results obtained with trees that attained reproductive capacity during the experimental period confirmed that changes in the degree of DNA methylation and polyamine concentrations found among juvenile and mature states come about immediately after the phase change. We suggest that both indicators may be associated with the loss of morphogenic ability during ageing, particularly after phase change, through a number of molecular interactions, which are subsequently discussed.

  6. Genomic DNA methylation-demethylation during aging and reinvigoration of Pinus radiata.

    Science.gov (United States)

    Fraga, Mario F; Rodríguez, Roberto; Cañal, Maria Jesús

    2002-08-01

    In animals, DNA methylation is related to gene silencing during ontogenic development. Little is known about DNA methylation in plants, although occasional changes in the DNA methylation state of specific gene promoters have been reported in angiosperms during some developmental processes. We found large differences in the extent of DNA methylation between meristematic areas of juvenile and mature Pinus radiata D. Don. trees, whereas differences in the extent of DNA methylation between differentiated tissues of juvenile and mature trees were small. In meristematic areas, there was a gradual decrease in extent of DNA methylation as the degree of reinvigoration increased. The observed changes in extent of DNA methylation during aging and reinvigoration indicate that reinvigoration could be a consequence of epigenetic modifications opposite in direction to those that occur during aging.

  7. Lactarius deliciosus and Pinus radiata in New Zealand: towards the development of innovative gourmet mushroom orchards.

    Science.gov (United States)

    Guerin-Laguette, Alexis; Cummings, Nicholas; Butler, Ruth Catherine; Willows, Anna; Hesom-Williams, Nina; Li, Shuhong; Wang, Yun

    2014-10-01

    The cultivation of Lactarius deliciosus (saffron milk cap) in New Zealand began in 2002 when fruiting bodies were produced in an Otago plantation of Pinus radiata seedlings artificially mycorrhized by L. deliciosus. In 2007, 42 P. radiata seedlings mycorrhized by L. deliciosus under controlled conditions were planted in a grass field at Plant and Food Research (Lincoln, Canterbury). The effects of pine bark mulch application and initial degree of mycorrhization of seedlings were examined to determine their influence on tree growth, development of mycorrhizae (i.e. their multiplication on the root system and their degree of branching) and fruiting body production. Mulch application increased tree growth significantly over 4 years. High initial mycorrhization slightly stimulated tree growth over 2 years. The initial degree of mycorrhization was positively, but not strongly, related to the persistence and development of L. deliciosus mycorrhizae and rhizomorphs based on root sample analyses 2 years after planting. However, mulching strongly reduced the proportion of highly branched L. deliciosus mycorrhizae compared with poorly ramified ones. A positive correlation was observed between the fruiting of L. deliciosus and the development of mycorrhizae. Mulching delayed the onset of fruiting body production. In 2010, fruiting bodies were produced only from non-mulched trees with eight of these (38 %) producing a total of 12 fruiting bodies. In 2011, 19 non-mulched trees (90 %) and 9 mulched trees (45 %) produced 143 and 47 fruiting bodies, respectively, totalling 190 fruiting bodies. By 2012, 19 non-mulched trees (90 %) and 13 mulched trees (65 %) produced 333 and 236 fruiting bodies, respectively, totalling 569 fruiting bodies (c. 30 kg). This study presents new information on factors influencing the onset of fruiting and the development of yields in a plantation of P. radiata mycorrhized by L. deliciosus. Projected yields as high as c. 300 kg/ha from the

  8. EFFECT OF THE REACTION CONDITIONS OVER THE YIELD AND PROPERTIES OF METHYLCELLULOSE OBTAINED FROM PINUS RADIATA KRAFT BLEACHED CELLULOSE

    OpenAIRE

    TAPIA, C.; SAPAG-HAGAR, J.; ANDRADE, C.T.; HASSÓN, J.; VALENZUELA, F.; BASUALTO, C.

    2002-01-01

    Kraft bleached cellulose from Pinus radiata was submitted to methylation reactions in heterogeneous media. After activation with 29% (w/w) NaOH solution, methylation reactions were carried out both with dimethyl sulfate (DMS) and methyl iodide (MI). The effects of the pressing ratio, reaction time and type of methylation agent were studied. The better yields were obtained with dimethylsulphate and the pressing ratio and reaction time were not signficant over the yield. Methylcellulose (MC) of...

  9. Quality of Pinus elliottii sawn timber from tapped forests

    Directory of Open Access Journals (Sweden)

    Pedro Henrique Gonzalez de Cademartori

    2012-12-01

    Full Text Available This study aimed to characterize the quality of Pinus elliottii sawn timber extracted from tapped forests and processed in a sawmill in São José do Norte (RS. Four butt logs and four upper logs for each of the three existing diameter grades were selected and sawed. The wood pieces were analyzed after sawing and after kiln drying. The presence of knots, which occurred due to the absence of forest management and influenced the qualitative classification of the wood pieces, was observed mainly in the samples from upper logs. The process of resin tapping contributed to a higher incidence of resin pockets in the samples from butt logs, also influencing the qualitative classification of the samples. The appearance of drying defects did not modify the classification of the wood samples from butt and upper logs.

  10. Effect of Partial Pre-Extraction of Hemicelluloses on the Properties of Pinus radiata Chemimechanical Pulps

    Directory of Open Access Journals (Sweden)

    Pablo Reyes

    2015-09-01

    Full Text Available Extraction of hemicelluloses prior to pulping and conversion of the extracted hemicelluloses to other bioproducts could provide additional revenue to traditional pulp and paper industries. The effect of hemicelluloses pre-extraction with a hydrothermal (HT process on Pinus radiata chemimechanical pulp (CMP properties was investigated in this study. The HT extraction resulted in a release of 7% to 58% of the initial amount of hemicelluloses from the wood. The extraction yield increased with temperature and extraction time. This hemicellulosic fraction was in the form of low molar mass oligomers with molecular weights varying from 1.5 to 100 kDa. Compared with the control (unextracted CMP pulp, the HT pre-extraction significantly reduced the refining energy to obtain a given fibrillation degree (freeness. The pulp yield with the HT/CMP process was in the range of 56% to 75%. Fiber properties of the pulps from pre-extracted wood, such as fiber length, were reduced, while increases in fiber width, fines content, fiber coarseness, and kink index were observed in comparison with the control pulps. The strength properties of CMP pulps decreased with increasing amounts of hemicellulose removal during the stage prior to pulping.

  11. Cellular modelling of secondary radial growth in conifer trees: application to Pinus radiata (D. Don).

    Science.gov (United States)

    Forest, Loïc; Demongeot, Jacques; Demongeota, Jacques

    2006-05-01

    The radial growth of conifer trees proceeds from the dynamics of a merismatic tissue called vascular cambium or cambium. Cambium is a thin layer of active proliferating cells. The purpose of this paper was to model the main characteristics of cambial activity and its consecutive radial growth. Cell growth is under the control of the auxin hormone indole-3-acetic. The model is composed of a discrete part, which accounts for cellular proliferation, and a continuous part involving the transport of auxin. Cambium is modeled in a two-dimensional cross-section by a cellular automaton that describes the set of all its constitutive cells. Proliferation is defined as growth and division of cambial cells under neighbouring constraints, which can eliminate some cells from the cambium. The cell-growth rate is determined from auxin concentration, calculated with the continuous model. We studied the integration of each elementary cambial cell activity into the global coherent movement of macroscopic morphogenesis. Cases of normal and abnormal growth of Pinus radiata (D. Don) are modelled. Abnormal growth includes deformed trees where gravity influences auxin transport, producing heterogeneous radial growth. Cross-sectional microscopic views are also provided to validate the model's hypothesis and results.

  12. Suppression of CCR impacts metabolite profile and cell wall composition in Pinus radiata tracheary elements.

    Science.gov (United States)

    Wagner, Armin; Tobimatsu, Yuki; Goeminne, Geert; Phillips, Lorelle; Flint, Heather; Steward, Diane; Torr, Kirk; Donaldson, Lloyd; Boerjan, Wout; Ralph, John

    2013-01-01

    Suppression of the lignin-related gene cinnamoyl-CoA reductase (CCR) in the Pinus radiata tracheary element (TE) system impacted both the metabolite profile and the cell wall matrix in CCR-RNAi lines. UPLC-MS/MS-based metabolite profiling identified elevated levels of p-coumaroyl hexose, caffeic acid hexoside and ferulic acid hexoside in CCR-RNAi lines, indicating a redirection of metabolite flow within phenylpropanoid metabolism. Dilignols derived from coniferyl alcohol such as G(8-5)G, G(8-O-4)G and isodihydrodehydrodiconiferyl alcohol (IDDDC) were substantially depleted, providing evidence for CCR's involvement in coniferyl alcohol biosynthesis. Severe CCR suppression almost halved lignin content in TEs based on a depletion of both H-type and G-type lignin, providing evidence for CCR's involvement in the biosynthesis of both lignin types. 2D-NMR studies revealed minor changes in the H:G-ratio and consequently a largely unchanged interunit linkage distribution in the lignin polymer. However, unusual cell wall components including ferulate and unsaturated fatty acids were identified in TEs by thioacidolysis, pyrolysis-GC/MS and/or 2D-NMR in CCR-RNAi lines, providing new insights into the consequences of CCR suppression in pine. Interestingly, CCR suppression substantially promoted pyrolytic breakdown of cell wall polysaccharides, a phenotype most likely caused by the incorporation of acidic compounds into the cell wall matrix in CCR-RNAi lines.

  13. Golgi enrichment and proteomic analysis of developing Pinus radiata xylem by free-flow electrophoresis.

    Directory of Open Access Journals (Sweden)

    Harriet T Parsons

    Full Text Available Our understanding of the contribution of Golgi proteins to cell wall and wood formation in any woody plant species is limited. Currently, little Golgi proteomics data exists for wood-forming tissues. In this study, we attempted to address this issue by generating and analyzing Golgi-enriched membrane preparations from developing xylem of compression wood from the conifer Pinus radiata. Developing xylem samples from 3-year-old pine trees were harvested for this purpose at a time of active growth and subjected to a combination of density centrifugation followed by free flow electrophoresis, a surface charge separation technique used in the enrichment of Golgi membranes. This combination of techniques was successful in achieving an approximately 200-fold increase in the activity of the Golgi marker galactan synthase and represents a significant improvement for proteomic analyses of the Golgi from conifers. A total of thirty known Golgi proteins were identified by mass spectrometry including glycosyltransferases from gene families involved in glucomannan and glucuronoxylan biosynthesis. The free flow electrophoresis fractions of enriched Golgi were highly abundant in structural proteins (actin and tubulin indicating a role for the cytoskeleton during compression wood formation. The mass spectrometry proteomics data associated with this study have been deposited to the ProteomeXchange with identifier PXD000557.

  14. Bark polyflavonoids from Pinus radiata as functional building-blocks for polylactic acid (PLA-based green composites

    Directory of Open Access Journals (Sweden)

    D. E. Garcia

    2016-10-01

    Full Text Available Polylactic acid (PLA was melt-blended with Pinus radiata unmodified and modified (hydroxypropyled bark polyflavonoids in order to use such polyphenolic building-blocks as functional additives for envisaged applications. Rheological, morphological, molecular, thermal, and flexural properties were studied. Polyflavonoids improved blend processability in terms of short-time mixing. Furthermore, hydroxypropylated polyflavonoids improve miscibility in binary and ternary blends. Blend-composition affects crystallization-, melting-, and glass transition-temperature of PLA, as well as thermal resistance, and flexural properties of the blends. Polyflavonoids induced PLA-crystallization, and polymer-chain decomposition. Modified and unmodified bark polyflavonoids from radiata pine can be used successfully in PLA-based green composites beyond the food-packaging applications. The high compatibility between PLA and hydroxypropyled polyflavonoids highlights the potential of such phenolic derivatives for PLA-based material design.

  15. Evaluation of Trichoderma spp. and Clonostachys spp. Strains to Control Fusarium circinatum in Pinus radiata Seedlings Evaluación de Cepas de Trichoderma spp. y Clonostachys spp. para Controlar Fusarium circinatum en Plántulas de Pinus radiata

    Directory of Open Access Journals (Sweden)

    Priscila Moraga-Suazo

    2011-09-01

    Full Text Available The fungus Fusarium circinatum Nirenberg & O’Donnell causes pine pitch canker, an important disease for conifers worldwide. F. circinatum was first detected in Chile in 2001 and to date is present in nurseries and clonal hedges from Libertador General Bernardo O’Higgins Region to Los Rios Region. The purpose of this study was to evaluate the potential of Trichoderma spp. and Clonostachys spp. strains to control F. circinatum in Pinus radiata D. Don seedlings in the absence of other effective control methods. Eighty-one Trichoderma spp. and Clonostachys spp. strains were evaluated through in vitro assays to determine their ability to act as antagonists of F. circinatum and 21 strains were tested for their ability to reduce post-emergence mortality and increase P. radiata survival under greenhouse conditions. During in vitro experiments, 15 strains of Trichoderma inhibited mycelial growth of the pathogen by more than 60% and one strain of Clonostachys showed parasitism of F. circinatum hyphae. Greenhouse experiments showed no control of the disease when the antagonists were added to substrate after the pathogen. However, when the antagonists were added before the pathogen, four strains (Clonostachys UDC-32 and UDC-222 and Trichoderma UDC-23 and UDC-408 reduced post-emergence mortality between 80 and 100%. Among these strains, only Clonostachys UDC-222 significantly increased the survival of P. radiata seedlings. These results showed that Clonostachys UDC-222 has the potential to be used as a biocontrol agent against F. circinatum in the production of P. radiata plants.Fusarium circinatum Nirenberg & O’Donnell es el hongo que causa el cancro resinoso del pino, una enfermedad de importancia mundial en coníferas. En Chile, F. cicirnatum fue detectado por primera vez el año 2001 y a la fecha se encuentra presente en algunos viveros y huertos clonales desde la Región del Libertador General Bernardo O’Higgins hasta la Región de Los R

  16. Progress towards initiation of somatic embryogenesis from differentiated tissues of radiata pine (Pinus radiata D. Don) using cotyledonary embryos

    DEFF Research Database (Denmark)

    Find, Jens Iver; Hargreaves, Cathy L.; Reeves, Catherine B.

    2014-01-01

    of dissected embryos and a modified Litvay medium, Glitz, was best. This combination gave the highest rate of initiation, and it was possible to initiate somatic embryogenesis (SE) from differentiated cells in the epicotyledonary region of postcotyledonary zygotic embryos from the two tested families...... with an average initiation rate of approximately 24% and 7% from stage five and six embryos, respectively. This is different from established initiation protocols of embryogenic cultures in radiata pine, which has traditionally been based on embryo rescue and continued proliferation of immature zygotic embryos....... A further implication of initiation of SE from excised post-cotyledonary embryos was that the period of initiation of embryogenic cultures was extended from 4 to 12 wk....

  17. VARIABILIDAD GENÉTICA DEL CRECIMIENTO EN PROGENIES SELECTAS DE Pinus radiata

    Directory of Open Access Journals (Sweden)

    Freddy Mora

    2006-09-01

    Full Text Available Heredabilidad en sentido estricto (h2, correlación genética intra-clase (2IC y componentes de varianza para la altura, diámetro a la altura del pecho (DAP y volumen del fuste, a los siete años de edad después de la plantación, fueron analizados en dos ensayos de progenie de Pinus radiata establecidos en el sur de Chile, en orden a examinar la variabilidad genética del crecimiento en una generación avanzada de la especie. Estos ensayos incluyeron árboles provenientes de propagación vegetativa y generativa. Las heredabilidades fueron estimadas para los árboles originados de semillas, y mostraron los siguientes valores: altura, 0.08-0.13; diámetro a la altura del pecho, 0-0.13; volumen del fuste, 0-0.09. Los valores de la correlación genética intra-clase, estimados para el grupo de árboles originados de propagación vegetativa, fueron moderados a bajos (2IC: altura, 0.1-0.11; diámetro a la altura del pecho, 0.01-0.05; volumen del fuste, 0.03-0.06. No obstante la presencia de heredabilidades y correlaciones moderadas para algunas características y, la variación relativamente limitada entre grupos de árboles reflejan la fuerte selección realizada a las progenies. En general, los árboles provenientes de estacas presentaron una tendencia a la menor variación intra-genotípica, y evidenciaron magnitudes relativas de las varianzas debida al grupo (2G mayores a las varianzas familiares (2F, en cuatro de seis caracteres evaluados, indicando una tendencia a la mayor homogeneidad en el crecimiento, característica común de la propagación vegetativa.

  18. Seasonal changes in stable carbon isotope ratios within annual growth rings of Pinus radiata

    International Nuclear Information System (INIS)

    Walcroft, A.; Silvester, W.; Whitehead, D.; Kelliher, F.

    1997-01-01

    The stable isotope composition of photosynthetically assimilated carbon (δ 13 C) is determined by the ratio of the leaf internal CO 2 concentration (c i ) to that of the ambient air (c a ), and so reflects the contribution of both stomatal conductance (g s ) and the rate of photosynthesis (A). Assimilated carbon which is subsequently laid down as wood in annual growth rings may therefore represent a time integrated record of physiological responses by the whole tree to seasonal changes in the environmental variables regulating growth. We analysed the stable carbon isotope composition of Pinus radiata wood collected from two plantation forest sites in New Zealand which differ markedly in temperature, rainfall and soil characteristics. For both sites, discs were cut from the stem of several trees near ground level and whole wood samples were taken from within individual annual growth rings over a number of years. At one site, diameter bands were installed over the 1994 - 1996 growing seasons in order to date precisely the formation of wood during that time. Trees at each site consistently showed a seasonal pattern in the stable isotope composition of wood within individual growth rings. The amplitude of seasonal δ 13 C variation at the wet and dry sites were 1-2 per thousand and 4 per thousand respectively. Mean δ 13 C values from the wet site were 3 per thousand more 13 C depleted than those from the dry site implying lower water-use efficiency (carbon assimilation per unit transpiration). A process-based, model of stomatal conductance and CO 2 assimilation was combined with a soil-water balance model to estimate the average daily leaf-level intercellular CO 2 concentration (c i ). Over two growing seasons at each site there was generally good agreement between mean canopy-level c i derived from the tree-ring δ 13 C data and modelled leaf-level c i levels. Further, the ratio of annual CO 2 assimilation to transpiration estimated by the model for each site

  19. Improving initiation, genotype capture, and family representation in somatic embryogenesis of Pinus radiata by a combination of zygotic embryo maturity, media, and explant preparation

    DEFF Research Database (Denmark)

    Hargreaves, Cathy; Find, Jens; Reeves, Cathie

    2009-01-01

    The principal aim of this investigation was to improve somatic embryogenesis initiation and to enhance representation of families and genotypes within those families of Pinus radiata D. Don. A total of 19 open-pollinated seed families, many with unrelated and weakly related parents, were tested...

  20. Descomposición de hojarasca de Pinus radiata y tres especies arbóreas nativas Decomposition of leaf litter of Pinus radiata and three native tree species

    Directory of Open Access Journals (Sweden)

    CHRISTOPHER H. LUSK

    2001-09-01

    Full Text Available En el centro-sur de Chile, las últimas décadas han sido testigo de una conversión masiva de bosques, matorrales y tierras agrícolas a plantaciones de árboles exóticos. Aunque se ha estudiado la influencia de dichos cambios sobre el balance hídrico, los posibles efectos sobre otros procesos ecosistémicos han recibido poca atención. En esta breve comunicación se presentan datos de un estudio de la descomposición de hojarasca de Pinus radiata y tres especies arbóreas nativas, llevado a cabo con el fin de explorar los posibles efectos del reemplazo de bosque nativo por plantaciones exóticas sobre el ciclaje de nutrientes. Se incubaron muestras de las cuatro especies en dos ambientes distintos en sitios colindantes: bajo un bosque nativo secundario, y bajo un rodal de P. radiata. Se registró la pérdida de peso seco después de dos meses y seis meses. Las tasas diarias de descomposición fueron mucho mayores durante los primeros dos meses de incubación que durante los cuatro meses subsiguientes. En ambas fechas hubo diferencias significativas entre las especies y entre los sitios: todas las especies presentaron mayores tasas de descomposición bajo P. radiata que bajo el bosque nativo. No hubo evidencia de interacción entre sitio y especie. Después de seis meses, el orden de pérdida de peso seco fue Nothofagus obliqua > P. radiata > Peumus boldus > Cryptocarya alba. La variación interespecífica en la tasa de descomposición presentó más relación con el área foliar específica que con el contenido de nitrógeno en la hojarasca. Dado que la hojarasca de P. radiata se descompuso más lentamente que la de la especie caducifolia N. obliqua, pero más rápidamente que las especies esclerófilas, los efectos de la sustitución o invasión sobre descomposición dependerían de la composición original del bosque nativo en cuestiónRecent decades have seen widespread conversion of native forests, shrublands and farmland in south

  1. Application of gamma radiation to the nodes detection in Pinus Radiata (D.Don) wood pieces; Aplicacion de la radiacion gamma en la deteccion de nudos en piezas de madera de Pino Radiata (D.Don)

    Energy Technology Data Exchange (ETDEWEB)

    Morales, J R; Dinator, Maria I [Chile Univ., Santiago (Chile). Dept. de Fisica; Karsulovic C, Jose T; Leon G, Adolfo [Chile Univ., Santiago (Chile). Dept. de Tecnologia de la Madera

    1997-12-31

    Attenuation of 59.5 KeV photons provided by an Am-241 source, has been used to detect knots in lumber pieces from Pinus Radiata (D.Don). It is shown that the linear attenuation coefficient is a sensitive parameter to detect singularities in the structure of this material. The scanning of the piece provides profiles which define the position and extension of the singularity. (author). 7 refs.

  2. The effect of water availability on plastic responses and biomass allocation in early growth traits of Pinus radiata D. Don

    Energy Technology Data Exchange (ETDEWEB)

    Espinoza, S. E.; Magni, C. R.; Martinez, V. A.; Ivkovic, M.

    2013-05-01

    Aim of study: The aim of the study was to assess the effect of water availability on plastic responses and biomass allocation in early growth traits of Pinus radiata D. Don. Area of study: Seedlings of 69 families of P. radiata belonging to five different sites in Central Chile, ranging from coastal range to fothills of the Andes, were grown in controlled conditions to evaluate differences in response to watering. Material and methods: The seedlings were subjected to two watering regimes: well-watered treatment, in which seedlings were watered daily, and water stress treatment in which seedlings were subjected to three cyclic water deficits by watering to container capacity on 12 days cycles each. After twenty-eight weeks root collar diameter, height, shoot dry weight (stem + needles), root dry weight, total dry weight, height/diameter ratio and root/shoot ratio were recorded. Patterns and amounts of phenotypic changes, including changes in biomass allocation, were analyzed. Main results: Families from coastal sites presented high divergence for phenotypic changes, allocating more biomass to shoots, and those families from interior sites presented low phenotypic plasticity, allocating more biomass to roots at the expense of shoots. These changes are interpreted as a plastic response and leads to the conclusion that the local land race of P. radiata in Chile originating from contrasting environments possess distinct morphological responses to water deficit which in turn leads to phenotypic plasticity. Research highlights: Families belonging to sandy soil sites must be considered for tree breeding in dry areas, selecting those with high root: shoot ratio. (Author) 46 refs.

  3. MADERA DE COMPRESIÓN EN PINUS RADIATA D. DON: I, CARACTERÍSTICAS ANATÓMICAS

    OpenAIRE

    Diaz-vaz,J.E; Fernandez,A; Valenzuela,L; Torres,M

    2007-01-01

    Se caracterizó la madera de compresión en 10 árboles de Pinus radiata D.Don con inclinaciones menores a 10 º en dos sitios.          Los diámetros de traqueidas de los árboles del sitio Arena húmeda resultaron estadísticamente mayores que los del sitio Arcilla; pero no resultaron diferentes al comparar madera juvenil y madura o al compara madera de compresión con madera opuesta.          Diferencias significativas se determinaron en el largo de traqueida entre sitios (Arena húmeda-Arcilla), t...

  4. First record of the genus .i.Bloszykiella./i. in Kenya with the description of .i.Bloszykiella tertia./i. sp n. (Acari: Uropodidae) from a .i.Pinus radiata./i. D. Don plantation

    Czech Academy of Sciences Publication Activity Database

    Kontschán, J.; Starý, Josef

    2015-01-01

    Roč. 56, č. 3 (2015), s. 629-635 ISSN 1681-5556 Institutional support: RVO:60077344 Keywords : Acari * new species * Pinus radiata plantation * Kenya Subject RIV: EG - Zoology Impact factor: 0.708, year: 2015

  5. Formation of post-fire water-repellent layers in Monterrey pine (Pinus radiata D. Don) plantations in south-central Chile

    Science.gov (United States)

    P. Garcia-Chevesich; R. Pizarro; C. L. Stropki; P. Ramirez de Arellano; P. F. Ffolliott; L. F. DeBano; Dan Neary; D. C. Slack

    2010-01-01

    A wildfire burned about 15,000 ha of Monterrey Pine (Pinus radiata D. Don) plantations near Yungay, Chile, in January of 2007. Post-fire water repellency (hydrophobicity) was measured using the water-drop-penetration-time (WDPT) method at depths of 0, 5, and 10 mm from the soil surface. These measurements were collected on burned sites of both young (4-years old) and...

  6. Wood formation from the base to the crown in Pinus radiata: gradients of tracheid wall thickness, wood density, radial growth rate and gene expression

    Science.gov (United States)

    Sheree Cato; Lisa McMillan; Lloyd Donaldson; Thomas Richardson; Craig Echt; Richard Gardner

    2006-01-01

    Wood formation was investigated at five heights along the bole for two unrelated trees of Pinus radiataBoth trees showed clear gradients in wood properties from the base to the crown. Cambial cells at the base of the tree were dividing 3.3-fold slower than those at the crown, while the average thickness of cell walls in wood was highest at the base....

  7. Stable carbon and oxygen isotope ratios of annual rings of pinus radiata provide an integrative record of canopy gas exchange

    International Nuclear Information System (INIS)

    Barbour, M.M.; Farquhar, G.D.

    2000-01-01

    Full text: Seasonal variation in δ 13 C and δ 18 O of cellulose from annual rings of Pinus radiata growing at each of three sites in New Zealand was measured. The three sites differed in annual water balance, temperature, and vapour pressure deficit, and these differences were reflected in cellulose δ 13 C and δ 18 O. Specific events such as drought or heavy rain were recorded as peaks and troughs in enrichment. A canopy-level combined photosynthesis and conductance model was linked to a model of soil water content and δ 18 O of xylem water to allow daily prediction of δ 13 C and δ 18 O of cellulose. A photosynthesis-weighted average of δ 13 C and δ 18 O was calculated for each sampling period. Each sample represented between 3 and 30 days, depending on stem growth rate. The timing and amplitude of changes in δ 13 C were predicted accurately by the model, while general seasonal patterns and event related peaks in δ 18 O enrichment were well predicted. These results suggest that stable isotope ratios of cellulose from annual rings reflect the canopy response to interactions between site-specific and seasonal variation in climatic conditions and soil water availability

  8. The carbon budget of Pinus radiata plantations in south-western Australia under 4 climate change scenarios

    International Nuclear Information System (INIS)

    Simioni, G.; Ritson, P.; McGrath, J.; Dumbrell, I.; Copeland, B.

    2009-01-01

    The future stem wood production and net ecosystem production of Pinus radiata plantations in southwestern Australia were estimated in this modelling study, which was conducted in order to determine the potential effects of anticipated severe rainfall reductions in the region. Four climate change and emission scenarios were considered as well as simulations of the present climate. Results of the study showed that stem wood production and NEP were not significantly influenced by moderate changes in temperature. However, stem wood production and NEP decreased significantly under the most pessimistic climate change scenarios. Results of the study suggested that a trade-off between the positive effects of rising atmospheric carbon dioxide (CO 2 ) on plant and water use efficiency and the negative impacts of decreased rainfall and increased temperatures. Changes in heterotrophic respiration lagged behind changes in plant growth. It was concluded that realistic predictions of forest production and carbon sequestration potential will require modelling tools capable of characterizing interactions between environmental variables, plant physiology and soil organic matter decomposition, as well as the potential range of climate change scenarios. 53 refs., 4 tabs., 9 figs

  9. Fourier transform infrared imaging and microscopy studies of Pinus radiata pulps regarding the simultaneous saccharification and fermentation process

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, Rosario del P., E-mail: rosariocastillo@udec.cl [Faculty of Pharmacy, University of Concepcion, Concepcion (Chile); Biotechnology Center, University of Concepcion, Concepcion (Chile); Araya, Juan [Faculty of Pharmacy, University of Concepcion, Concepcion (Chile); Biotechnology Center, University of Concepcion, Concepcion (Chile); Troncoso, Eduardo [Consorcio Bioenercel S.A, University of Concepcion, Concepcion (Chile); Vinet, Silenne; Freer, Juanita [Biotechnology Center, University of Concepcion, Concepcion (Chile); Faculty of Chemical Sciences, University of Concepcion, Concepcion (Chile)

    2015-03-25

    The distribution and chemical patterns of lignocellulosic components at microscopic scale and their effect on the simultaneous saccharification and fermentation process (SSF) in the production of bioethanol from Pinus radiata pulps were analyzed by the application of diverse microscopical techniques, including scanning electronic microscopy (SEM), confocal laser scanning microscopy (CLSM) and attenuated total reflectance (ATR) – Fourier transform infrared microspectroscopy. This last technique was accompanied with multivariate methods, including principal component analysis (PCA) and multivariate curve resolution with alternating least squares (MCR-ALS) to evaluate the distribution patterns and to generate pure spectra of the lignocellulosic components of fibers. The results indicate that the information obtained by the techniques is complementary (ultrastructure, confocality and chemical characterization) and that the distribution of components affects the SSF yield, identifying lignin coalescence droplets as a characteristic factor to increase the SSF yield. Therefore, multivariate analysis of the infrared spectra enabled the in situ identification of the cellulose, lignin and lignin-carbohydrates arrangements. These techniques could be used to investigate the lignocellulosic components distribution and consequently their recalcitrance in many applications where minimal sample manipulation and microscale chemical information is required.

  10. Toxicological features of maleilated polyflavonoids from Pinus radiata (D. Don.) as potential functional additives for biomaterials design.

    Science.gov (United States)

    García, Danny E; Medina, Paulina A; Zúñiga, Valentina I

    2017-11-01

    Polyflavonoids from Pinus radiata (D. Don.) are an abundant natural oligomers highly desirable as renewable chemicals. However, structural modification of polyflavonoids is a viable strategy in order to use such polyphenols as macrobuilding-blocks for biomaterial design. Polyflavonoids were esterified with three five-member cyclic anhydrides (maleic, itaconic, and citraconic) at 20 °C during 24 h in order to diversify physicochemical-, and biological-properties for agricultural, and food-packaging applications. In addition, the influence of the chemical modification, as well as the chemical structure of the grafting on toxicological features was evaluated. Structural features of derivatives were analyzed by spectroscopy (FT-IR and 1 H-NMR), and the degree of substitution was calculated. Toxicological profile was assessed by using three target species in a wide range of concentration (0.01-100 mgL - 1 ). Effect of polyflavonoids on the growth rate (Selenastrum capricornutum), mortality (Daphnia magna), and germination and radicle length (Lactuca sativa) was determined. Chemical modification affects the toxicological profile on the derivatives in a high extent. Results described remarkable differences in function of the target specie. The bioassays indicate differences of the polyflavonoids toxicological profile associated to the chemical structure of the grafting. Results allowed conclude that polyflavonoids from pine bark show slight toxic properties. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Distribution and movement of nutrients and metals in a Pinus radiata forest soil following applications of biosolids

    International Nuclear Information System (INIS)

    McLaren, Ronald G.; Clucas, Lynne M.; Speir, Tom W.; Schaik, Andrew P. van

    2007-01-01

    Samples of biosolids, spiked with increasing amounts of Cu, Ni or Zn were applied to field plots in a Pinus radiata forest, and the nutrient and metal status of the forest litter and underlying mineral soil was monitored over a period of six years following application. The macronutrient status of the forest litter was changed markedly by the biosolids application, with substantial increases in N, P and Ca concentrations, and decreases in Mg and K. The C/N ratio of the litter was also decreased and pH was increased by the biosolids application. The metals applied with the biosolids were retained predominantly in the litter layer, and even with non-metal-spiked biosolids there were substantial increases in litter metal concentrations. There was also firm evidence of some movement of Cu, Ni and Zn into the underlying mineral soil. The potential environmental issues resulting from these changes in nutrient and metal status are discussed. - Biosolids application to forest soils results in substantial build-up of macronutrients and metals in the forest litter layer

  12. Distribution and movement of nutrients and metals in a Pinus radiata forest soil following applications of biosolids

    Energy Technology Data Exchange (ETDEWEB)

    McLaren, Ronald G. [Centre for Soil and Environmental Quality, Agriculture and Life Sciences Division, P.O. Box 84, Lincoln University Canterbury (New Zealand)]. E-mail: mclaren@lincoln.ac.nz; Clucas, Lynne M. [Centre for Soil and Environmental Quality, Agriculture and Life Sciences Division, P.O. Box 84, Lincoln University Canterbury (New Zealand); Speir, Tom W. [Institute of Environmental Science and Research Ltd, P.O. Box 50348, Porirua (New Zealand); Schaik, Andrew P. van [Institute of Environmental Science and Research Ltd, P.O. Box 50348, Porirua (New Zealand)

    2007-05-15

    Samples of biosolids, spiked with increasing amounts of Cu, Ni or Zn were applied to field plots in a Pinus radiata forest, and the nutrient and metal status of the forest litter and underlying mineral soil was monitored over a period of six years following application. The macronutrient status of the forest litter was changed markedly by the biosolids application, with substantial increases in N, P and Ca concentrations, and decreases in Mg and K. The C/N ratio of the litter was also decreased and pH was increased by the biosolids application. The metals applied with the biosolids were retained predominantly in the litter layer, and even with non-metal-spiked biosolids there were substantial increases in litter metal concentrations. There was also firm evidence of some movement of Cu, Ni and Zn into the underlying mineral soil. The potential environmental issues resulting from these changes in nutrient and metal status are discussed. - Biosolids application to forest soils results in substantial build-up of macronutrients and metals in the forest litter layer.

  13. Fourier transform infrared imaging and microscopy studies of Pinus radiata pulps regarding the simultaneous saccharification and fermentation process

    International Nuclear Information System (INIS)

    Castillo, Rosario del P.; Araya, Juan; Troncoso, Eduardo; Vinet, Silenne; Freer, Juanita

    2015-01-01

    The distribution and chemical patterns of lignocellulosic components at microscopic scale and their effect on the simultaneous saccharification and fermentation process (SSF) in the production of bioethanol from Pinus radiata pulps were analyzed by the application of diverse microscopical techniques, including scanning electronic microscopy (SEM), confocal laser scanning microscopy (CLSM) and attenuated total reflectance (ATR) – Fourier transform infrared microspectroscopy. This last technique was accompanied with multivariate methods, including principal component analysis (PCA) and multivariate curve resolution with alternating least squares (MCR-ALS) to evaluate the distribution patterns and to generate pure spectra of the lignocellulosic components of fibers. The results indicate that the information obtained by the techniques is complementary (ultrastructure, confocality and chemical characterization) and that the distribution of components affects the SSF yield, identifying lignin coalescence droplets as a characteristic factor to increase the SSF yield. Therefore, multivariate analysis of the infrared spectra enabled the in situ identification of the cellulose, lignin and lignin-carbohydrates arrangements. These techniques could be used to investigate the lignocellulosic components distribution and consequently their recalcitrance in many applications where minimal sample manipulation and microscale chemical information is required

  14. Lack of genetic variation in tree ring delta13C suggests a uniform, stomatally-driven response to drought stress across Pinus radiata genotypes.

    Science.gov (United States)

    Rowell, Douglas M; Ades, Peter K; Tausz, Michael; Arndt, Stefan K; Adams, Mark A

    2009-02-01

    We assessed the variation in delta(13)C signatures of Pinus radiata D. Don stemwood taken from three genetic trials in southern Australia. We sought to determine the potential of using delta(13)C signatures as selection criteria for drought tolerance. Increment cores were taken from P. radiata and were used to determine the basal area increment and the delta(13)C signature of extracted cellulose. Both growth increment and cellulose delta(13)C were affected by water availability. Growth increment and delta(13)C were negatively correlated suggesting that growth was water-limited. While there was significant genetic variation in growth, there was no significant genetic variation in cellulose delta(13)C of tree rings. This suggests that different genotypes of P. radiata display significant differences in growth and yet respond similarly to drought stress. The delta(13)C response to drought stress was more due to changes in stomatal conductance than to the variation in photosynthetic capacity, and this may explain the lack of genetic variation in delta(13)C. The lack of genetic variation in cellulose delta(13)C of tree rings precludes its use as a selection criterion for drought tolerance among P. radiata genotypes.

  15. Silvicultural manipulation and site effect on above and belowground biomass equations for young Pinus radiata

    International Nuclear Information System (INIS)

    Rubilar, Rafael A.; Allen, H. Lee; Alvarez, Jose S.; Albaugh, Timothy J.; Fox, Thomas R.; Stape, Jose L.

    2010-01-01

    There is little understanding of how silvicultural treatments, during the early stages of tree development, affect allometric relationships. We developed and compared stem, branch, foliage, coarse and fine root biomass, and leaf area estimation equations, for four-year-old genetically improved radiata pine trees grown on three contrasting soil-site conditions. At each site, selected trees were destructively sampled from a control (shovel planted, no weed control, fertilized with 2 g of boron), a shovel planted + weed control (2 first years) + complete fertilization (nitrogen + phosphorus + boron 2 first years + potassium 2nd year), and a soil tillage (subsoil at 60 cm) + weed control (first 2 years) + complete fertilization treatment. Tissues were separated into foliage, branch, stem, fine and coarse roots (>2 mm). Regression equations for each tree biomass tissue versus leaf area were fit for each site and compared among treatments and sites with the same genetic material. Our results indicated that individual tree biomasses for young plantations are affected by silvicultural treatment and site growing conditions. Higher variability in estimates was found for foliage and branches due to the ephemeral nature of these components. Stem biomass equations vary less, but differences in biomass equations were found among sites and treatments. Coarse root biomass estimates were variable but less than expected, considering the gradient among sites. Similar to stem biomass, a simple positive general linear relationship between root collar diameter, or diameter at breast height with coarse roots biomass was developed across sites and treatments.

  16. Proteomic analysis of Pinus radiata needles: 2-DE map and protein identification by LC/MS/MS and substitution-tolerant database searching.

    Science.gov (United States)

    Valledor, Luis; Castillejo, Maria A; Lenz, Christof; Rodríguez, Roberto; Cañal, Maria J; Jorrín, Jesús

    2008-07-01

    Pinus radiata is one of the most economically important forest tree species, with a worldwide production of around 370 million m (3) of wood per year. Current selection of elite trees to be used in conservation and breeding programes requires the physiological and molecular characterization of available populations. To identify key proteins related to tree growth, productivity and responses to environmental factors, a proteomic approach is being utilized. In this paper, we present the first report of the 2-DE protein reference map of physiologically mature P. radiata needles, as a basis for subsequent differential expression proteomic studies related to growth, development, biomass production and responses to stresses. After TCA/acetone protein extraction of needle tissue, 549 +/- 21 well-resolved spots were detected in Coommassie-stained gels within the 5-8 pH and 10-100 kDa M(r) ranges. The analytical and biological variance determined for 450 spots were of 31 and 42%, respectively. After LC/MS/MS analysis of in-gel tryptic digested spots, proteins were identified by using the novel Paragon algorithm that tolerates amino acid substitution in the first-pass search. It allowed the confident identification of 115 out of the 150 protein spots subjected to MS, quite unusual high percentage for a poor sequence database, as is the case of P. radiata. Proteins were classified into 12 or 18 groups based on their corresponding cell component or biological process/pathway categories, respectively. Carbohydrate metabolism and photosynthetic enzymes predominate in the 2-DE protein profile of P. radiata needles.

  17. Productivity and cost of harvesting a stemwood biomass product from integrated cut-to-length harvest operations in Australian Pinus radiata plantations

    International Nuclear Information System (INIS)

    Walsh, D.; Strandgard, M.

    2014-01-01

    Significant quantities of woody biomass from the tops of trees and larger woody ‘waste’ pieces that fall outside existing sawlog and pulpwood specifications are left on site post final harvest in Australian radiata Pinus radiata (D. Don) (radiata pine) plantations. Woody biomass is a potential product for pulp making or energy generation. Commercial use of woody biomass from radiata pine plantations would add extra value to the Australian plantation estate through improved resource utilisation, and potentially reduced post-harvesting silvicultural costs. This study investigated the productivity and cost impact of the harvest and extraction to roadside of woody biomass in an integrated harvest operation in a typical Australian two machine (harvester/processor and forwarder), cut-to-length, clearfall operation in a mature, thinned radiata pine plantation. The harvest operation yielded 23 GMt/ha (5% of the total yield) of woody biomass (known as ‘fibreplus’), 443 GMt/ha of sawlogs and 28 GMt/ha of pulpwood. The mean quantity of biomass left on site was 128 GMt/ha, mainly consisting of branches and needles, sufficient to minimise nutrient loss and protect the soil from erosion. Woodchips derived from the fibreplus product were suitable for kraft pulp making, (when blended in small amounts with clean de-barked roundwood woodchips), and for energy generation. The method trialed with the fibreplus product being produced did not impact harvesting and processing productivity and costs, but extraction was 14% less productive. Through analysis of the productivities of each phase and development of a cost model the harvest and extraction of the fibreplus product was estimated to increase total unit costs by ∼4.9%. - Highlights: • Study of the productivity and cost impact of producing a woody biomass product. • We compared two scenarios – harvesting with and without the biomass product. • An additional 23 GMt/ha (5% of the total yield) of woody biomass

  18. Sub-Compartment Variation in Tree Height, Stem Diameter and Stocking in a Pinus radiata D. Don Plantation Examined Using Airborne LiDAR Data

    Directory of Open Access Journals (Sweden)

    Hanieh Saremi

    2014-08-01

    Full Text Available Better information regarding the spatial variability of height, Diameter at Breast Height (DBH and stocking could improve inventory estimates at the operational Planning Unit since these parameters are used extensively in allometric equations, including stem volume, biomass and carbon calculations. In this study, the influence of stand stocking on height and DBH of two even aged radiata pine (Pinus radiata D. Don stands were investigated using airborne Light Detection and Ranging (LiDAR data at a study site in New South Wales, Australia. Both stands were characterized by irregular stocking due to patchy establishment and self-thinning in the absence of any silvicultural thinning events. For the purpose of this study, a total of 34 plots from a 34 year old site and 43 plots from a nine year old site were established, from which a total of 447 trees were sampled. Within these plots, DBH and height measurements were measured and their relationships with stocking were evaluated. LiDAR was used for height estimation as well as stem counts in fixed plots (stocking. The results showed a significant relationship between stem DBH and stocking. At both locations, trees with larger diameters were found on lower stocking sites. Height values were also significantly correlated with stocking, with taller trees associated with high stocking. These results were further verified of additional tree samples, with independent field surveys for DBH and LiDAR-derived metrics for height analysis. This study confirmed the relationship between P. radiata tree heights and stem diameter with stocking and demonstrated the capacity of LiDAR to capture sub-compartment variation in these tree-level attributes.

  19. Seasonal Terpene Variation in Needles of Pinus radiata (Pinales: Pinaceae) Trees Attacked by Tomicus piniperda (Coleoptera: Scolytinae) and the Effect of Limonene on Beetle Aggregation.

    Science.gov (United States)

    Romón, Pedro; Aparicio, Domitila; Palacios, Francisco; Iturrondobeitia, Juan Carlos; Hance, Thierry; Goldarazena, Arturo

    2017-09-01

    Concentrations of four monoterpenes were determined in needles of Pinus radiata (D.Don) (Pinales: Pinaceae) trees that were attacked or nonattacked by Tomicus piniperda (L.) (Coleoptera: Scolytinae). Compounds were identified and quantified by gas chromatography-mass spectrometry. The mean ambient temperature was obtained using climate-recording data loggers. The effect of limonene on field aggregation was also evaluated at three limonene release rates using Lindgren attractant-baited traps and trap logs. Attacked trees produced less α-pinene in March, July, and November than nonattacked trees, less β-pinene in July and November, and less limonene from May to November. Limonene reduced the attraction of T. piniperda to attractant-baited traps and trap logs. Results were linked to better responses to high temperatures, with respect to terpene contents, by the nonattacked trees after the spring attack. © The Author 2017. Published by Oxford University Press on behalf of Entomological Society of America.

  20. No impact of transgenic nptII-leafy Pinus radiata (Pinales: Pinaceae) on Pseudocoremia suavis (Lepidoptera: Geometridae) or its endoparasitoid Meteorus pulchricornis (Hymenoptera: Braconidae).

    Science.gov (United States)

    Burgess, E P J; Barraclough, E I; Kean, A M; Walter, C; Malone, L A

    2011-10-01

    To investigate the biosafety to insects of transgenic Pinus radiata D. Don containing the antibiotic resistance marker gene nptII and the reproductive control gene leafy, bioassays were conducted with an endemic lepidopteran pest of New Zealand plantation pine forests and a hymenopteran endoparasitoid. Larvae of the common forest looper, Pseudocoremia suavis (Butler), were fed from hatching on P. radiata needles from either one of two nptII-leafy transgenic clones, or an isogenic unmodified control line. For both unparasitized P. suavis and those parasitized by Meteorus pulchricornis (Wesmael), consuming transgenic versus control pine had no impact on larval growth rate or mass at any age, larval duration, survival, pupation or successful emergence as an adult. Total larval duration was 1 d (3%) longer in larvae fed nptII-2 than nptII-1, but this difference was considered trivial and neither differed from the control. In unparasitized P. suavis larvae, pine type consumed did not affect rate of pupation or adult emergence, pupal mass, or pupal duration. Pine type had no effect on the duration or survival of M. pulchricornis larval or pupal stages, mass of cocoons, stage at which they died, adult emergence, or fecundity. Parasitism by M. pulchricornis reduced P. suavis larval growth rate, increased the duration of the third larval stadium, and resulted in the death of all host larvae before pupation. The lack of impact of an exclusive diet of nptII-leafy transgenic pines on the life history of P. suavis and M. pulchricornis suggests that transgenic plantation pines expressing nptII are unlikely to affect insect populations in the field.

  1. Experimental determination of the effect of temperature and humidity on the development of colour in Pinus radiata

    Directory of Open Access Journals (Sweden)

    M. McCurdy

    2005-06-01

    Full Text Available Experiments were undertaken to determine the effects of drying conditions (temperature and humidity on the development of kiln brown stain in radiata pine during drying. Eight schedules were tested with temperatures ranging from 50°C to 120°C and relative humidity from 14% to 67%. The variables measured were moisture content, color expressed using the CIELab color space, and nitrogen content. The experiments have shown that the kiln brown stain is influenced by drying temperature and drying time. The recommendation is therefore that low-temperature and low-humidity schedules be developed for controlling color development.

  2. Variations in dark respiration and mitochondrial numbers within needles of Pinus radiata grown in ambient or elevated CO2 partial pressure

    International Nuclear Information System (INIS)

    Griffin, K. L.; Anderson, O. R.; Tissue, D. T.; Turnbull, M. H.; Whitehead, D.

    2004-01-01

    An experiment involving comparison of within-leaf variations in cell size, mitochondrial numbers and dark respiration in the most recently expanded tip, the mid-section and the base of needles of Pinus radiata grown for four years at ambient and elevated carbon dioxide partial pressure, is described. Results showed variation in mitochondrial numbers and respiration along the length of the needle, with the highest number of mitochondria per unit cytoplasm and the highest rate of respiration per unit leaf area at the base of the needle. Elevated carbon dioxide pressure caused the number of mitochondria per unit cytoplasm to double regardless of location (tip, basal or mid sections). Under these conditions, greatest mitochondrial density was observed at the tip. The mean size of mitochondria was not affected by either growth at elevated carbon dioxide pressure or by position on the needle. Respiration per unit leaf area at elevated carbon dioxide pressure was highest at the tip of needles, decreasing towards the middle and basal sections. The observed data supports the hypothesis that the highest number of mitochondria per unit area of cytoplasm occurs at the base of the needle, but does not support the hypothesis that the lowest rate of respiration also occurs at the base. It is suggested that the relationship that determines the association between structure and function in these needles is more complex than previously thought. 33 refs., 4 tabs., 1 fig

  3. Effect of liming and organic and inorganic fertilization on soil carbon sequestered in macro-and microaggregates in a 17-year old Pinus radiata silvopastoral system.

    Science.gov (United States)

    Mosquera-Losada, M R; Rigueiro-Rodríguez, A; Ferreiro-Domínguez, N

    2015-03-01

    Agroforestry systems have been recognized as a potential greenhouse gas mitigation strategy under the Kyoto Protocol because of their ability to absorb carbon dioxide from the atmosphere and store carbon mainly in the soil. Soil particle size and land management practices are known to have a considerable influence on carbon storage in soils. This study evaluated changes in soil chemical and physical properties, and quantified and compared the amount of C stored in the bulk soil and in three different soil fractions (250-2000, 53-250 and silvopastoral system located on an acidic forest soil under Pinus radiata D. Don. Areas of this system were subjected ten years ago to one of nine fertilization treatments: three different doses of sewage sludge or no fertilization, all with or without the addition of lime, and mineral fertilizer with no liming. Seventeen years after reforestation and seven years after canopy closure, strong gradients with soil depth were found regarding soil bulk density, pH and carbon storage. Intense soil management (high doses of sewage sludge and liming) generally reduced soil carbon storage, mainly in coarse aggregates, but this could be compensated by the increase in tree and pasture development observed in soils subject to intermediate sewage sludge doses. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Extração e caracterização de hemiceluloses de Pinus radiata e sua viabilidade para a produção de bioetanol

    Directory of Open Access Journals (Sweden)

    Pablo Reyes

    2013-02-01

    Full Text Available As galactoglucomananas são as principais frações de hemiceluloses presentes nas madeiras moles e contêm, principalmente, as hexoses galactose, glicose e manose. O isolamento eficiente e seletivo dessas hemiceluloses é um obstáculo crítico a superar para sua utilização. Os objetivos deste trabalho foram extrair e caracterizar soluções aquosas ácidas e neutras de hemiceluloses de cavacos de madeira de Pinus radiata, bem como avaliar sua viabilidade para a produção de bioetanol. As hemiceluloses em P. radiata representam 26 g/100 g de madeira (base seca, e as hexoses são responsáveis por aproximadamente 64% dessa quantidade. De acordo com as diferentes condições de extração, cerca de 50% da fração hemicelulósica foi solubilizada e recuperada depois de uma precipitação com etanol. As frações recuperadas de hemiceluloses estavam na forma de oligômeros com peso molecular médio (Mw variando entre 4x10³ e 4x10(5 g/mol. Os oligômeros hemicelulósicos foram hidrolisados com ácido sulfúrico diluído e os hidrolisados concentrados até aproximadamente 70 g/L hexosas e fermentados pela levedura Saccharomyces cerevisiae. Os resultados de fermentação indicaram que os açúcares obtidos dos extratos ácidos e neutros foram fermentados com rendimentos máximos de etanol de 63% e 54% (22 g/L e 19 g/L, respectivamente. A conversão de hemiceluloses da madeira em etanol é viável, porém seu baixo rendimento faz que o processo não seja economicamente atrativo, razão por que melhorias no processo ou usos alternativos das hemiceluloses devem ser avaliados.

  5. Extração e caracterização de hemiceluloses de Pinus radiata e sua viabilidade para a produção de bioetanol Extraction and characterization of hemicelluloses from Pinus radiata and its feasibility for bioethanol production

    Directory of Open Access Journals (Sweden)

    Pablo Reyes

    2013-02-01

    Full Text Available As galactoglucomananas são as principais frações de hemiceluloses presentes nas madeiras moles e contêm, principalmente, as hexoses galactose, glicose e manose. O isolamento eficiente e seletivo dessas hemiceluloses é um obstáculo crítico a superar para sua utilização. Os objetivos deste trabalho foram extrair e caracterizar soluções aquosas ácidas e neutras de hemiceluloses de cavacos de madeira de Pinus radiata, bem como avaliar sua viabilidade para a produção de bioetanol. As hemiceluloses em P. radiata representam 26 g/100 g de madeira (base seca, e as hexoses são responsáveis por aproximadamente 64% dessa quantidade. De acordo com as diferentes condições de extração, cerca de 50% da fração hemicelulósica foi solubilizada e recuperada depois de uma precipitação com etanol. As frações recuperadas de hemiceluloses estavam na forma de oligômeros com peso molecular médio (Mw variando entre 4x10³ e 4x10(5 g/mol. Os oligômeros hemicelulósicos foram hidrolisados com ácido sulfúrico diluído e os hidrolisados concentrados até aproximadamente 70 g/L hexosas e fermentados pela levedura Saccharomyces cerevisiae. Os resultados de fermentação indicaram que os açúcares obtidos dos extratos ácidos e neutros foram fermentados com rendimentos máximos de etanol de 63% e 54% (22 g/L e 19 g/L, respectivamente. A conversão de hemiceluloses da madeira em etanol é viável, porém seu baixo rendimento faz que o processo não seja economicamente atrativo, razão por que melhorias no processo ou usos alternativos das hemiceluloses devem ser avaliados.Galactoglucomannans are the major hemicellulosic fraction present in softwoods, and is mainly composed by the hexoses: galactose, glucose and mannose. The efficient and selective isolation of these hemicelluloses is regarded as one of the most critical obstacles to overcome for their utilization. The objective of the current work was to extract and characterize acidic and

  6. Investigation on the variation of annual ring thicknesses and word densities in South African Pinus radiata stands under the influence of climate and different thinning measures by means of radiodensitometry

    International Nuclear Information System (INIS)

    Bues, C.T.

    1984-01-01

    The present work investigates three phenomena of growth biology in Pinus radiata stands: In the first investigation project: the thickness of the annual rings in relation to climate factors; In the second project: the variability of annual ring thickness and wood density as a function of different thinning measures; In the third project the variability of wood density within a Pinus radiate stand is analyzed. To determine the thickness of the annual rings and the wood density values within the annual rings, the method of radiodensitometry, developed during the last decade, is adopted: In the first investigation project the thicknesses of 800 annual rings are determined, in the second project 3808 annual ring structures are investigated, and in the third project 2000 annual rings are evaluated for their density characteristics. (orig./MG) [de

  7. Forested habitat preferences by Chilean citizens: Implications for biodiversity conservation in Pinus radiata plantations Preferencia por hábitats forestales por ciudadanos chilenos: Implicancias para la conservación de biodiversidad en plantaciones de Pinus radiata

    Directory of Open Access Journals (Sweden)

    NICOLE PÜSCHEL-HOENEISEN

    2012-06-01

    Full Text Available The need for conservation outside protected areas has prompted the modification of productive practices to allow the maintenance of wild biota in productive landscapes such as those associated to timber production. Forest plantations could cooperate in conserving biodiversity outside protected areas if they have a developed understory. However, the success of the production changes depends on the social support they receive. Therefore, we evaluate Chilean citizens' preference for five habitats of different types of forest management. In addition, we assessed perceptions regarding the relationship between pine plantations and native wildlife through surveys administered in Chillán, Santiago and six rural localities in the VII and VIII region. Despite there is not a unanimous opinion regarding pine plantations as a threat to biodiversity, people prefer pine plantations that serve as habitat for endangered fauna. In fact, they agree on paying more for forest products to contribute to conservation in forest plantations, and actually prefer plantations with a developed understory better than those without it. This would suggest that measures aimed at conservation in forest plantations could be supported by the Chilean society.La necesidad de la conservación fuera de áreas protegidas ha llevado a la modificación de las prácticas productivas para permitir el mantenimiento de la biota silvestre en paisajes productivos tales como los asociados a la producción de madera. Las plantaciones forestales podrían cooperar en la conservación de la biodiversidad fuera de áreas protegidas si tienen un sotobosque desarrollado. Sin embargo, el éxito de los cambios en la producción depende del apoyo social que estos reciben. Así, evaluamos la preferencia por cinco paisajes con diferentes tipos de manejo forestal. Además, se evaluó la percepción acerca de la relación entre las plantaciones de pino y la fauna nativa a través de encuestas realizadas en

  8. Comunidad ectomicorrícica en una cronosecuencia de Pinus radiata (Pinophyta: Pinaceae de la zona de transición climática mediterráneo-templada de Chile central The ectomycorrhizal community in a chronosequence of Pinus radiata (Pinophyta: Pinaceae of the transitional Mediterranean-temperate climatic zone of central Chile

    Directory of Open Access Journals (Sweden)

    YUSSI M PALACIOS

    2012-03-01

    Full Text Available En ecosistemas naturales y plantaciones, las coníferas establecen asociaciones mutualistas con una comunidad diversa de hongos micorrícicos. El estudio de este tema en Sudamérica es aún incipiente, y no existen antecedentes sobre la dinámica temporal de esta comunidad, y menos de sus potenciales causas, a pesar de su importancia para un país forestal como Chile. En el presente trabajo se evaluó la dinámica de la comunidad ectomicorrícica, identificando y cuantificando los hongos formadores de esta asociación en raíces finas de Pinus radiata en plantaciones de 3, 10 y 20 años. Los resultados confirman que la comunidad ectomicorrícica de P. radiata cambia con la edad de los árboles, la cual difiere más bien en el patrón de dominancia que en la riqueza de especies, separándose un primer grupo de árboles de 3 y 10 años de un segundo grupo de 20 años. Un total de once morfotipos de micorrizas fueron diferenciados. Cuatro de ellos, identificados como Hebeloma crustuliniforme, Inocybe sp., Russula sardonia y Pinirhiza spinulosa, fueron los más abundantes (77, 29, 78 y 8 % respectivamente, mientras las otras se encontraron colonizando menos de 100 puntas de raíz (In natural forest ecosystems and plantations, most trees live in mutualistic association with mycorrhizal fungi. Studies of this association in South America are still scarce, especially when referring to the causes of temporal dynamics of this symbiotic community, despite its importance in countries with a thriving forestry industry like Chile. This study evaluates the dynamics of the ectomycorrhizal community of Pinus radiata stands of 3, 10 and 20 years of age, identifying and quantifying the most common fungal colonizers of fine roots in each age class. The results confirm that the mycobiont community changes with host tree age but that age classes differ in dominance patterns rather than in species richness, with the three- and ten-year-old tree cohorts forming a

  9. Assessment of longitudinal modulus of elasticity in structural elements of Pinus Caribaea timber beams

    Directory of Open Access Journals (Sweden)

    André Luis Christoforo

    2012-05-01

    Full Text Available The current standard NBR 7190/1997 (Project of Timber Structures makes no reference to tests for determining the stiffness and strength in parts of structural lumber; restricting the analysis to bodies-of-tests with small dimensions and without defects. This paper presents an alternative method to determine the longitudinal modulus of elasticity in timber beams, based on the Finite Element Method, as well as the Inverse Analysis Method with an optimization technique. Results show that the methodology proposed by the Brazilian standard can also be applied to pieces of structural dimensions.

  10. Mechanical properties of structural maritime pine sawn timber from Galicia (Pinus pinaster Ait. ssp. atlantica)

    Energy Technology Data Exchange (ETDEWEB)

    Carballo, J.; Hermoso, E.; Fernandez-Golfin, J. I.

    2009-07-01

    The use of maritime pine sawn timber in structural applications requires knowledge of its mechanical properties. Standards have changed, however, since the last research on this timber was performed. In the present study, 491 beams of maritime pine from Gaelic, of structural-use size but different cross-section, were tested according to these modified standards. Each beam was visually graded according to standard UNE 56.544 and subjected to a four point bending test. The strength classes assigned by the visual grades awarded suggest this material to have greater structural capacity than that currently assumed. The relationships between the modulus of elasticity, strength and density were also examined. (Author) 25 refs.

  11. Mineralización del nitrógeno, carbono y actividad enzimática del suelo en un bosque de Nothofagus obliqua (Mirb Oerst y una plantación de Pinus radiata D. Don. del centro-sur de Chile Nitrogen and carbon mineralization and enzyme activity in soils of Nothofagus obliqua (Mirb Oerst stands and Pinus radiata D. Don plantation in south-central Chile

    Directory of Open Access Journals (Sweden)

    YESSICA RIVAS

    2009-03-01

    Full Text Available En Chile, el establecimiento de plantaciones comerciales de rápido crecimiento ha sido sostenido en las últimas décadas mediante la sustitución de bosques nativos y conversión de suelos agrícolas. Pinus radiata D. Don es la principal especie productiva, debido a su crecimiento acelerado y adaptabilidad al clima y los suelos. En el presente estudio se plantea que la actividad biológica del suelo es variable a través del año, en respuesta a variaciones de precipitación, temperatura y contenido de humedad de suelo y que el cambio de uso de suelo desde un bosque templado de Nothofagus obliqua (Mirb Oerst a una plantación con coniferas exóticas, modifica la química del suelo y consecuentemente los procesos de N-min, C-min y la actividad biológica del suelo. Esta hipótesis fue examinada en un bosque de N. obliqua y una plantación de P. radiata del centro-sur de Chile (40°07' S, 72° O. Se evaluó mensualmente la tasa mineralización de nitrógeno (N-min, cabono (C-min y la actividad enzimática potencial del suelo (ureasa, proteasa e hidrólisis de la fluoresceína diacetato entre septiembre 2003 y mayo 2005. Los resultados demuestran que los niveles de las variables de actividad biológica del suelo fueron significativamente diferentes entre las parcelas de bosque y plantación (Lambda de Wilk = 0,022; F 5,80 = 733; P In Chile, commercial forests plantations have increased during the last decades due in part to replacement of native forests and conversion of agricultural soils. Pinus radiata D. Don has been the main tree planted, due to its rapid growth and adaptability. In the present study we proposed that biological activity varies along the year due to changes of precipitation, temperature and soil water content and mainly because the conversion of native forest to exotic P. radiata plantations alters the soil chemistry, N and C mineralization and the potential enzymatic activity in these soils. This hypothesis was examined in a

  12. Biomass partitioning and leaf area of Pinus radiata trees subjected to silvopastoral and conventional forestry in the VI region, Chile Distribución de biomasa y área foliar en árboles de Pinus radiata sometidos a manejo silvopastoral y convencional en la VI región, Chile

    Directory of Open Access Journals (Sweden)

    ROLANDO RODRÍGUEZ

    2003-09-01

    Full Text Available The effects of silvicultural regimes on leaf area and biomass distribution were analyzed in 16-year old Pinus radiata trees growing in the semiarid zone of Chile. Three stands with different silvopastoral management were compared with a conventionally managed stand. Data were obtained through destructive sampling of 36 trees and analyzed by MANOVA and regression models of ANCOVA. Results show that the management regime affects the leaf area. Specific leaf area was affected by both silvicultural regime and crown position. Total biomass per tree under the silvopastoral regime was 2.1 to 2.5 times larger than in the conventional forestry regime. However, aboveground biomass partitioning was neither affected by the silvicultural regime nor by the schemes of silvopastoral management. The most important allometric change was in fine root biomass, which was greater under the conventional forestry regime than in the silvopastoral one. Fine root biomass increases with a regular distribution of the plants in the field, and decreases with the clumping of trees. Similarly, the fine root biomass decreases with fertilization. Both plantation design and fertilization regimes explain the changes in the fine root biomass to components of the crown. However, crown structure influences the magnitude of these changes.Se analizaron los efectos del régimen silvícola en el área foliar y distribución de biomasa en árboles de Pinus radiata de 16 años, creciendo en la zona semiárida de Chile. Para ello se compararon tres rodales con manejo silvopastoral con uno manejado en forma tradicional. Los datos se obtuvieron mediante muestreo destructivo de 36 árboles y se analizaron mediante MANOVA y regresión en modelos de ANCOVA. Los resultados permiten concluir que el régimen de manejo afectó el área foliar. El área foliar específica fue afectada por el régimen silvícola y su posición en la copa. La biomasa total por árbol con régimen silvopastoral es 2,1 a

  13. Defect core detection in radiata pine logs

    International Nuclear Information System (INIS)

    Wallace, G.

    1993-01-01

    Internal defect cores in Pinus radiata logs arise primarily from the practice in New Zealand of pruning trees to increase the amount of clear wood. Realising the benefits of this practice when milling the logs is hampered by the lack of a practical method for detecting the defect cores. This report attempts to establish industry requirements for detections and examine techniques which may be suitable. Some trials of a novel technique are described. (author) 19 refs.; 11 figs

  14. Influencia del deterioro incipiente producido por el hongo de pudrición parda Serpula lacrymans, sobre las propiedades mecánicas de compresión normal y paralela a la fibra en madera de Pinus radiata D. Don

    Directory of Open Access Journals (Sweden)

    Pereira, A.

    2011-03-01

    Full Text Available Several buildings and structures of wood are attacked by rot fungi, leading in some cases, slight weight losses that result in reductions in the strength properties of the material. In this work was evaluated the influence of early rot decay in wood, in mechanical properties of normal and parallel compression. For this, were inoculated samples of Pinus radiata D. Don with brown rot fungi Serpula Lacrymans. These samples were tested in three differents periods of fungal exposure. The results identified a significant decrease in percentage of the properties under study.Diversas edificaciones y estructuras construidas en madera son atacadas por hongos de pudrición, provocando en algunos casos, leves pérdidas de peso que se traducen en disminución en las propiedades resistentes del material. En este trabajo se evaluó la influencia de estados incipientes de pudrición en madera, en las propiedades mecánicas de compresión paralela y compresión normal. Para esto, se inocularon probetas de Pinus radiata D. Don. con el hongo de pudrición parda Serpula lacrymans, las cuales fueron posteriormente ensayadas mecánicamente en tres diferentes períodos de exposición fúngica. Los resultados obtenidos determinaron una importante disminución porcentual de las propiedades bajo estudio.

  15. EFFECTIVENESS OF A SUPERFICIAL TREATMENT USING BIFENTHRIN TO PROTECT RADIATA PINE FRAMING FROM DAMAGE BY SUBTERRANEAN AND DRYWOOD TERMITES IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Paimin Sukartana

    2010-06-01

    Full Text Available Various experimental testing procedures were undertaken in Indonesia to determine the effectiveness of a patented superficial (envelope treatment using bifenthrin to protect radiata pine framing material from damage by two species of subterranean termites (Macrotermes gilvus and Coptotermes curvignathus and one species of drywood termite (Cryptotermes cynocephalus. Lengths of framing material (Pinus radiata sapwood were commercially treated to the targeted retention of 0.02% m/m of bifenthrin in the outer 2 mm depth penetration zone of the material. The treated and untreated materials were subsequently cut into test specimens and exposed to M. gilvus in the field and a semi-laboratory trial, to C. curvignathus in the laboratory and a semi-laboratory trial and to C. cynocephalus in a laboratory trial. No supplementary treatment was performed on the exposed cut ends of the treated test specimens. The results from the trials clearly demonstrated that the superficial treatment of bifenthrin seemed effective in protecting test specimens of radiata pine framing material from significant damage by Indonesia’s most notorious termite species that often causes serious economic loss to the timbers. Termites were unable to damage any of the bifenthrin-treated surfaces of test specimens. Any obser ved damage by termites, albeit minor, was in all cases confined to the exposed cut ends of test specimens. In contrast, attack by termites on the untreated control test specimens caused damage of the samples ranging from light to heavy.

  16. Durability of timber silencers at Wairakei geothermal steam field

    Energy Technology Data Exchange (ETDEWEB)

    Hedley, M E

    1979-02-01

    After early failures of reinforced concrete silencers and because of high costs of concrete-lined steel structures, preliminary tests were undertaken to assess the suitability of timber for silencer construction. Tests indicated that radiata pine treated with pentachlorophenol/oil or untreated red beech had most potential for timber silencer fabrication. One prototype silencer of each material was constructed and both were installed on operational bores in 1965. The red beech silencer had a service life of 4 years. The radiata pine silencer operated for 12/sup 1///sub 2/ years, although replacement had been recommended 1 year before this time expired. The performance of this silencer encouraged the general use of timber for silencer construction and further units were built. Procurement of satisfactory grades of timber has proved difficult and has limited silencer fabrication. Ways of improving timber supply, which require modification of silencer design, are discussed.

  17. Long term effects of wet site timber harvesting and site preparation on soil properties and loblolly pine (Pinus taeda L.) productivity in the lower Atlantic Coastal Plain

    OpenAIRE

    Neaves III, Charles Mitchell

    2017-01-01

    Short term studies have suggested that ground based timber harvesting on wet sites can alter soil properties and inhibit early survival and growth of seedlings. Persistence of such negative effects may translate to losses in forest productivity over a rotation. During the fall and winter of 1989, numerous salvage logging operations were conducted during high soil moisture conditions on wet pine flats in the lower coastal plain of South Carolina following Hurricane Hugo. A long-term experim...

  18. Estudio del efecto de la dirección de medición y contenido de humedad en la velocidad de ultrasonido en madera de Pinus radiata D. Don a través de análisis de varianza

    Directory of Open Access Journals (Sweden)

    Rodrigo Ortíz Mansilla

    2009-09-01

    Full Text Available Para analizar la técnica de ultrasonido como una alternativa en la evaluación del estado estructural de diferentes edificaciones construidas en madera, se estudió el efecto e importancia relativa de la dirección de medición y el contenido de humedad, so- bre la velocidad de transmisión en este material. Para esto, se aplicaron pulsos longitudinales ultrasónicos de 1 Mhz sobre pro- betas de madera de Pinus radiata D. Don, bajo un procedimiento experimental que consideró la utilización de un diseño fac- torial 22 completamente aleatorizado. Como resultado del análisis de varianza, se determinó que dentro de los rangos de con- tenido de humedad y dirección de medición estudiados, este último se presenta como factor significativo, explicando el 95% de la variabilidad total observada. De hecho, la variación del contenido de humedad entre 0 y 15%, conlleva a valores de veloci- dad de propagación promedio de 1.644 m/s y 2.130 m/s para las direcciones tangencial y radial, respectivamente. Los resulta- dos de este trabajo permiten concluir que al momento de realizar una evaluación mediante ultrasonido en estructuras en servi- cio, principalmente se debe considerar la dirección de medición como un factor determinante en el estudio; sin embargo, la e- fectividad de aplicación de esta técnica requiere de otros trabajos complementarios que consideren la propagación en planos mixtos de la madera. Este estudio se llevará a cabo próximamente.

  19. DETERMINACIÓN DE MEDIOS DE CULTIVO Y PH PARA LA MASIFICACIÓN in vitro DE CEPAS DE Suillus luteus Aubl. ASOCIADAS A Pinus radiata D. Don Y Scleroderma citrinum Pers. ASOCIADAS A Eucalyptus globulus Labill. DE LA REGIÓN DEL BIOBÍO, CHILE

    Directory of Open Access Journals (Sweden)

    Marta González

    2015-02-01

    Full Text Available El uso de agentes biológicos en la producción en vivero ha aflorado como un elemento que permite no sólo mejorar la calidad morfológica y fisiológica de las plantas, sino que también posibilitar un mayor éxito en el ámbito silvicultural de una plantación. Estos agentes biológicos requieren de un ambiente óptimo para crecer, asociarse y reproducirse. El objetivo de este estudio fue determinar la dependencia del pH y el medio de cultivo en el crecimiento in vitro de distintas cepas de Suillus luteus y Scleroderma citrinum asociadas a Pinus radiata y Eucalyptus globulus, respectivamente. El estudio se realizó en condiciones controladas de temperatura y humedad, disponiendo los inóculos en placas Petri con diferentes medios cultivo, evaluando parámetros de crecimiento y biomasa a los 38 días para S. luteus y 105 días para S. citrinum. Los resultados indican que tanto el medio de cultivo, el pH del medio, así como las cepas de cada especie estudiada, son determinantes en las respuestas de crecimiento de los hongos ectomicorrícicos in vitro evaluados. Las cepas de S. luteus se desarrollaron adecuadamente en un medio de cultivo con abundancia de nutrientes (BAF, MMN como en baja presencia de ellos (EMA, y con pH más bien ácido (4,8 y 5,8. Por otro lado, las cepas de S. citrinum presentaron, para los mismos ambientes, un desarrollo inferior y lento, no obstante, la cepa Sc8 se reprodujo de forma óptima y rápida bajo un medio de cultivo BAF y con un pH moderadamente ácido de 5,8.

  20. Plastic Coatings and Wraps for New Marine Timber Piling

    Science.gov (United States)

    1990-05-01

    1985 Tema Nauclea diderrichii - (F.F.K. Ampong) June 1985 Sekondi untreated 4 ITALY Pinus sylvestris (Anna Gambetta) untreated Follonica 5 Malaysia...West) (K. DaIjeet Singh) 6 Malaysia (East) (C. Chan) 7 NEW ZEALAND April 1986 Pinus radiata sapwood (D.V. Plackett) (See IRG/WP/4121). Tauranga Harbour...interfering with final curing process. CLEANING: Tools and equipment should be cleaned prior to curing of the product with methylene chloride, methyl ethyl

  1. EFFECTIVENESS OF A SUPERFICIAL TREATMENT USING BIFENTHRIN TO PROTECT RADIATA PINE FRAMING FROM DAMAGE BY SUBTERRANEAN AND DRYWOOD TERMITES IN INDONESIA

    OpenAIRE

    Paimin Sukartana; Jim W. Creffield; Agus Ismanto; Neo E. Lelana; Rusti Rushelia

    2010-01-01

    Various experimental testing procedures were undertaken in Indonesia to determine the effectiveness of a patented superficial (envelope) treatment using bifenthrin to protect radiata pine framing material from damage by two species of subterranean termites (Macrotermes gilvus and Coptotermes curvignathus) and one species of drywood termite (Cryptotermes cynocephalus). Lengths of framing material (Pinus radiata sapwood) were commercially treated to the targeted retention of 0.02% m/m of bifent...

  2. Mechanical characterization of sawn timber for structural use, graded visually in accordance with Spanish standard UNE 56544

    Directory of Open Access Journals (Sweden)

    Fernández-Golfín, J. I.

    1998-12-01

    Full Text Available The employment of timber in structures in Spain was hurting of the nonexistence of accepted calculation procedures. The recent adoption and publication of the Eurocode 5 compels to the employment of the characteristic values of the material in the structural calculation by the method of the finite elements. This report sets forth the results of the experiments carried out at INIA's Forest Research Centre (CIFOR-INIA regarding the mechanical characterization of sawn timber of size 150x50x3.000 mm and the structural uses of "Pinus sylvestris, P. radiata and P. pinaster" from different Spanish provenances. The characteristic values and strength classes corresponding with the grades stated in the Spanish standard UNE 56544 are also provided. The report compares and analyses the results of these experiments, and presents the conclusions drawn from the different behaviour shown by the four species. An analysis of the Spanish standard for the visual grading of structural timber is carried out on the three species.

    El empleo de la madera en la construcción en España adolecía de la inexistencia de procedimientos de cálculo normalizados. La reciente adopción y publicación del Eurocódigo 5 obliga al empleo de los valores característicos del material en el cálculo estructural de la madera por el método de los elementos finitos. Se presentan los resultados de la caracterización mecánica de la madera aserrada de tamaño (150x50x3.000 mm y usos estructurales de "Pinus sylvestris, P. radiata y P. pinaster" de diferentes procedencias, llevada a cabo en el Centro de Investigación Forestal (CIFOR del INIA. Se aportan los valores característicos y clases de resistencia que corresponden a las clases de calidad definidas en la norma UNE 56544. Se efectúa una comparación y análisis de los resultados obtenidos, extrayendo conclusiones respecto del diferente comportamiento observado para las cuatro especies. Se analiza la adecuación de la

  3. Weight loss studies of fastener materials corrosion in contact with timbers treated with copper azole and alkaline copper quaternary compounds

    Energy Technology Data Exchange (ETDEWEB)

    Kear, Gareth [Building Research Association of New Zealand (BRANZ) Ltd., Science and Engineering Services, Private Bag 50 908, Porirua City 5240 (New Zealand)], E-mail: G.Kear@soton.ac.uk; Wu Haizhen; Jones, Mark S. [Building Research Association of New Zealand (BRANZ) Ltd., Science and Engineering Services, Private Bag 50 908, Porirua City 5240 (New Zealand)

    2009-02-15

    Corrosion rates of mild steel, AISI 316 stainless steel and hot-dipped galvanised steel in contact with preservative-treated Pinus radiata have been determined using four distinct accelerated (49 {+-} 1 deg. C) and non-accelerated (21 {+-} 2 deg. C) weight loss methodologies. The data were measured as a function of timber moisture content and copper concentration over periods of exposure ranging from 2 weeks to 14 months. The results show that the corrosion resistance of the stainless steel was not influenced by classification or magnitude of preservative loading. Corrosion rates of this material were multiple orders of magnitude lower than those of the mild and galvanised steels. In most instances, corrosion rates of hot-dipped galvanised layers in contact with alkaline copper quaternary-treated timbers were up to a factor of 10 times, or greater, than those measured for copper-chrome-arsenate treatments. A direct negative influence of copper ion concentration on the corrosion resistance of mild steel was also observed for each preservative type.

  4. INFLUENCIA DE LA MADERA JUVENIL DE PINO RADIATA SOBRE LAS PROPIEDADES MECÁNICAS DE TABLEROS OSB

    OpenAIRE

    PECHO,Robert; ANANIAS,Rubén A; BALLERINI,Aldo; CLOUTIER,Alain

    2004-01-01

    En este trabajo se estudia la influencia de la madera juvenil de pino radiata (Pinus radiata D. Don) sobre las propiedades mecánicas de tableros de hojuelas orientadas OSB. La madera para los ensayos es recogida de 10 árboles en pié de 26 años creciendo en plantaciones manejadas de la Octava región, Chile. La determinación de madera juvenil se realiza observando la variación radial de los anillos de crecimiento de la madera, usando un analizador de anillos en base a rayos X. Los detalles de l...

  5. Equilibrium moisture content of radiata pine at elevated temperature and pressure reveals measurement challenges

    DEFF Research Database (Denmark)

    Pearson, Hamish; Gabbitas, Brian; Ormarsson, Sigurdur

    2012-01-01

    moisture contents were attributed to condensation of liquid water on the specimen with subsequent evaporation at a rate that was too slow for the moisture content to reach equilibrium before it was measured. Reliable EMC data at elevated temperatures require (1) tight process control of experimental......Relatively few studies have been performed on the equilibrium moisture content (EMC) of wood under conditions of elevated temperature and pressure. Eight studies indicated that EMC near saturation decreased between 100 and 150 °C, whilst five studies indicated that EMC increased. The aim...... of this study was to identify the likely source of the disagreement using radiata pine (Pinus radiata D. Don) sapwood which was conditioned to a moisture content of around 3 % and then exposed for 1 h at 150 °C and relative humidities of either 50, 70 or 90 %. Mean values of EMC, obtained through in situ...

  6. Timber Curtain

    DEFF Research Database (Denmark)

    2015-01-01

    Timber Curtain is a site specific architectural installation, which is part of a research project conducted at the Aarhus School of Architecture as collaboration between Ph.D. and associate professor Niels Martin Larsen and the author. Through a digitally scripted associative model we performed s...... of pinewood timber, machined with a CMS Antares 5-axis CNC router. The digital process generation and simulation was implemented with Rhinoceros 3D, Grasshopper and GHPython, and AlphaCAM was used for preparing the CNC-routing....

  7. Timber tracking

    DEFF Research Database (Denmark)

    Düdder, Boris; Ross, Omry

    2017-01-01

    Managing and verifying forest products in a value chain is often reliant on easily manipulated document or digital tracking methods - Chain of Custody Systems. We aim to create a new means of tracking timber by developing a tamper proof digital system based on Blockchain technology. Blockchain...

  8. The flexural properties of young Pinus elliottii × Pinus caribaea var ...

    African Journals Online (AJOL)

    The objectives of this study were to determine the bending strength and stiffness properties of young Pinus elliottii × P. caribaea var. hondurensis timber from the Southern Cape, South Africa, and to evaluate the predictability of these properties from acoustic measurements on standing trees, logs and their sawn boards.

  9. The potential of breeding for enhanced inducibility in Pinus pinaster and Pinus radiata

    Science.gov (United States)

    Rafael Zas; Alejandro Solla; Xoaquin Moreira; Luis Sampedro

    2012-01-01

    Most resistance mechanisms against pests and pathogens in pine trees involve the production of chemical defenses. These defenses are not cost free and the production of secondary metabolisms is generally inversely related with other plant fitness correlates, such as growth. The existence of these negative genetic correlations imposes an important obstacle for breeding...

  10. Physiological response to drought in radiata pine: phytohormone implication at leaf level.

    Science.gov (United States)

    De Diego, N; Pérez-Alfocea, F; Cantero, E; Lacuesta, M; Moncaleán, P

    2012-04-01

    Pinus radiata D. Don is one of the most abundant species in the north of Spain. Knowledge of drought response mechanisms is essential to guarantee plantation survival under reduced water supply as predicted in the future. Tolerance mechanisms are being studied in breeding programs, because information on such mechanisms can be used for genotype selection. In this paper, we analyze the changes of leaf water potential, hydraulic conductance (K(leaf)), stomatal conductance and phytohormones under drought in P. radiata breeds (O1, O2, O3, O4, O5 and O6) from different climatology areas, hypothesizing that they could show variable drought tolerance. As a primary signal, drought decreased cytokinin (zeatin and zeatin riboside-Z + ZR) levels in needles parallel to K(leaf) and gas exchange. When Z + ZR decreased by 65%, indole-3-acetic acid (IAA) and abscisic acid (ABA) accumulation started as a second signal and increments were higher for IAA than for ABA. When plants decreased by 80%, Z + ZR and K(leaf) doubled their ABA and IAA levels, the photosystem II yield decreased and the electrolyte leakage increased. At the end of the drought period, less tolerant breeds increased IAA over 10-fold compared with controls. External damage also induced jasmonic acid accumulation in all breeds except in O5 (P. radiata var. radiata × var. cedrosensis), which accumulated salicylic acid as a defense mechanism. After rewatering, only the most tolerant plants recovered their K(leaf,) perhaps due to an IAA decrease and 1-aminocyclopropane-1-carboxylic acid maintenance. From all phytohormones, IAA was the most representative 'water deficit signal' in P. radiata.

  11. Global timber investments, wood costs, regulation, and risk

    Science.gov (United States)

    F. Cubbage; S. Koesbandana; P Mac Donagh; R. Rubilar; G Balmelli; V. Morales Olmos; R. De La Torre; M. Murara; V.A. Hoeflich; H. Kotze; R Gonzalez; O. Carrero; G. Frey; T. Adams; J. Turner; R. Lord; J. Huang; C. MacIntyre; Kathleen McGinley; R. Abt; R. Phillips

    2010-01-01

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America e Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay e were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each...

  12. Characterization of moisture in acetylated and propionylated radiata pine using low-field nuclear magnetic resonance (LFNMR) relaxometry

    DEFF Research Database (Denmark)

    Beck, Greeley; Thybring, Emil Engelund; Thygesen, Lisbeth Garbrecht

    2018-01-01

    . A possible explanation is the counteracting effects of decreased hydrophilicity and reduced moisture content (MC) of these water populations at higher levels of acetylation. The evaluation of propionylation on WCW T2 data was complicated by peak splitting in the relaxation spectrum. Constant T2 values......Moisture in radiata pine (Pinus radiata D. Don) earlywood (EW), which was acetylated or propionylated to various degrees, was measured by low-field nuclear magnetic resonance (LFNMR) relaxometry. Spin-spin relaxation times (T2) were determined for fully saturated samples at 22 and -18°C. T2 values...... for EW lumen water increased with increasing acetylation weight percentage gain (WPG), perhaps caused by the less hydrophilic acetylated wood (AcW) surface. Cell wall water (WCW) and the water in pits and small voids also showed increasing T2 values as a function of WPG but with a weaker tendency...

  13. Male sterile mutant in Vigna radiata

    International Nuclear Information System (INIS)

    Pande, Kalpana; Raghuvanshi, S.S.

    1987-01-01

    Single and combined treatment of γ-rays and 0.25 per cent EMS were tried on Vigna radiata variety K851. A male sterile mutant was isolated in M 2 generation. Experiments indicated male sterility to be recessive and monogenic in nature. 6 figures. (author)

  14. Damping in Timber Structures

    OpenAIRE

    Labonnote, Nathalie

    2012-01-01

    Key point to development of environmentally friendly timber structures, appropriate to urban ways of living, is the development of high-rise timber buildings. Comfort properties are nowadays one of the main limitations to tall timber buildings, and an enhanced knowledge on damping phenomena is therefore required, as well as improved prediction models for damping. The aim of this work has consequently been to estimate various damping quantities in timber structures. In particular, models h...

  15. Bioactive phenolic acids from Scorzonera radiata Fisch.

    Directory of Open Access Journals (Sweden)

    N Tsevegsuren

    2014-09-01

    Full Text Available Chromatographic separation of the crude extract obtained from the aerial parts of the Mongolian medicinal plant Scorzonera radiata yielded five new dihydrostilbenes [4], two new flavonoids, one new quinic acid derivative, as well as twenty known compounds including eight quinic acid derivatives, four flavonoids, two coumarins, five simple benzoic acids, and one monoterpene glycoside. We present here results on isolation and structural identification some active phenolic compounds from the Scorzonera radiata - eight quinic acid derivatives (quinic acid, 4,5-dicaffeoylquinic acid, 4,5-dicaffeoyl-epi-quinic acid, 3,5-dicaffeoylquinic acid, 3,5-dicaffeoyl-epi-quinic acid, chlorogenic acid, 5-p-coumaroylquinic acid (trans, 5-p-coumaroylquinic acid (cis. Quinic acid derivatives exhibited antioxidative activity.DOI: http://dx.doi.org/10.5564/mjc.v12i0.177 Mongolian Journal of Chemistry Vol.12 2011: 78-84

  16. Comparative nutritional analysis between Vigna radiata and Vigna ...

    African Journals Online (AJOL)

    Vigna radiata (mung bean) and Vigna mungo (mash bean) of the family Fabaceae are among staple food in Pakistan. The experiments were conducted on these beans to determine the proximate composition such as moisture, ash, fibre, fat and protein content. The protein isolates from V. radiata and V. mungo was ...

  17. Improvement of non-key traits in radiata pine breeding programme when long-term economic importance is uncertain.

    Science.gov (United States)

    Li, Yongjun; Dungey, Heidi; Yanchuk, Alvin; Apiolaza, Luis A

    2017-01-01

    Diameter at breast height (DBH), wood density (DEN) and predicted modulus of elasticity (PME) are considered as 'key traits' (KT) in the improvement in radiata pine breeding programmes in New Zealand. Any other traits which are also of interest to radiata pine breeders and forest growers are called 'non-key traits' (NKTs). External resin bleeding (ERB), internal checking (IC), number of heartwood rings (NHR) are three such non-key traits which affect wood quality of radiata pine timber. Economic importance of the KTs and NKTs is hard to define in radiata pine breeding programmes due to long rotation period. Desired-gain index (DGIs) and robust selection were proposed to incorporate NKTs into radiata pine breeding programme in order to deal with the uncertainty of economic importance. Four desired-gain indices A-D were proposed in this study. The desired-gain index A (DGI-A) emphasized growth and led to small decrease in ERB and small increase in IC and NHR. The expected genetic gains of all traits in the desired-gain index B (DGI-B) were in the favourable directions (positive genetic gains in the key traits and negative genetic gains in the non-key traits). The desired-gain index C (DGI-C) placed emphasis on wood density, leading to favourable genetic gain in the NKTs but reduced genetic gains for DBH and PME. The desired-gain index D (DGI-D) exerted a bit more emphasis on the non-key traits, leading large favourable reduction in the non-key traits and lower increase in the key traits compared with the other DGIs. When selecting both the key traits and the non-key traits, the average EBVs of six traits were all in the same directions as the expected genetic gains except for DBH in the DGI-D. When the key traits were measured and selected, internal checking always had a negative (favourable) genetic gain but ERB and NHR had unfavourable genetic gain in the most of time. After removing some individuals with high sensitivity to the change of economic weights, robust

  18. Improvement of non-key traits in radiata pine breeding programme when long-term economic importance is uncertain.

    Directory of Open Access Journals (Sweden)

    Yongjun Li

    Full Text Available Diameter at breast height (DBH, wood density (DEN and predicted modulus of elasticity (PME are considered as 'key traits' (KT in the improvement in radiata pine breeding programmes in New Zealand. Any other traits which are also of interest to radiata pine breeders and forest growers are called 'non-key traits' (NKTs. External resin bleeding (ERB, internal checking (IC, number of heartwood rings (NHR are three such non-key traits which affect wood quality of radiata pine timber. Economic importance of the KTs and NKTs is hard to define in radiata pine breeding programmes due to long rotation period. Desired-gain index (DGIs and robust selection were proposed to incorporate NKTs into radiata pine breeding programme in order to deal with the uncertainty of economic importance. Four desired-gain indices A-D were proposed in this study. The desired-gain index A (DGI-A emphasized growth and led to small decrease in ERB and small increase in IC and NHR. The expected genetic gains of all traits in the desired-gain index B (DGI-B were in the favourable directions (positive genetic gains in the key traits and negative genetic gains in the non-key traits. The desired-gain index C (DGI-C placed emphasis on wood density, leading to favourable genetic gain in the NKTs but reduced genetic gains for DBH and PME. The desired-gain index D (DGI-D exerted a bit more emphasis on the non-key traits, leading large favourable reduction in the non-key traits and lower increase in the key traits compared with the other DGIs. When selecting both the key traits and the non-key traits, the average EBVs of six traits were all in the same directions as the expected genetic gains except for DBH in the DGI-D. When the key traits were measured and selected, internal checking always had a negative (favourable genetic gain but ERB and NHR had unfavourable genetic gain in the most of time. After removing some individuals with high sensitivity to the change of economic weights

  19. Section of mechanized timbering

    Energy Technology Data Exchange (ETDEWEB)

    Balaganskiy, S Ye; Aksanov, Sh I; Ardashev, K A; Mednik, L Ye; Mikhaylov, P G

    1980-09-05

    A section of mechanized timbering is claimed which contains a base, roof timber, hydraulic stand, hydraulic packing cylinders, packing telescopic shield hinged to the roof timber by means of guides. To improve the reliability of forming the filling massif, the packing telescopic shield is made in the form of individual telescopic beams with guards which are interconnected by means of cross beams, while the gaps between the telescopic beams are covered with elasic plates.

  20. Changes to timber market

    International Nuclear Information System (INIS)

    Haluza, I.

    2008-01-01

    Ten thousands of tree trunks have ended up in the Liptovska Mara lake. The fact that state owned company Lesy SR decided to store the timber in the reservoir as it could not sell it on the market represents a small revolution in the industry. About a year ago timber processing companies were fighting for timber and suddenly it cannot be sold and has to be stored in the reservoir waiting for better times. When the forestry and timber processing industry will not be in such a difficult situation as it is now. Timber, floor and furniture manufacturers claim that the demand for their products and consequently also prices are falling. Some have already started to decrease production and started making redundancies. And when manufacturers complain, the timber suppliers are not happy either. The reason is that the industry has been hit by several blows at the same time. In last three to four years forests in Slovakia, Czech Republic, Austria, Scandinavia and in Canada have suffered several heavy windstorms after which large volumes of timber had to be processed quickly. So there was an excess of timber, particularly spruce. This created an ideal situation for the processing industry where the more agile companies increased their market share and offered timber at more competitive prices. (authors)

  1. Timber salvage economics

    Science.gov (United States)

    Jeffrey P. Prestemon; Thomas P. Holmes

    2008-01-01

    Timber salvage is commonly done following natural disturbances, to recover some value from damaged forests. Decision making about salvage, however, is affected by ownership objectives, the nature of the damage agent, site factors, and the strength of the local timber market. For profit-maximizing landowners, salvage decisions must balance the cost of harvesting...

  2. timber for structural use

    African Journals Online (AJOL)

    HOD

    Logs of Apa timber were air-dried and along the stem, 324 pieces of test specimens were ..... (machine) manual with the load rate of 1mm/min ..... [16] Desch, H. E., Timber properties, 6th. Edition,. Revised by J. M. Dinwoodie. Macmillan ...

  3. 1970 Oregon timber harvest.

    Science.gov (United States)

    Brian R. Wall

    1971-01-01

    The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

  4. Traditional timber frames

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Hamer, den J.; Leijten, A.J.M.; Salenikovich, A.

    2014-01-01

    Due to new possibilities traditional timber framing has become increasingly popular since the beginning of the 21e century. Although traditional timber framing has been used for centuries, the expected mechanical behaviour is not dealt with in great detail in building codes, guidelines or text

  5. Forest owners' timber sales satisfaction

    International Nuclear Information System (INIS)

    Pammo, R.; Ripatti, P.

    2003-01-01

    The TTS Institute has carried out a study concerning forest owners' timber sales. The material was collected in 2002 via a mail inquiry that targeted forest owners who sold timber during the years 1997-1999 and 1999-2002. Three quarters of the forest owners sold timber to the same timber buying company during both periods of 1997-1999 and 1999-2002. The most important reasons for selling to the same buyer were that they purchased all timber assortments, reliability and good timber price. Mainly the same reasons also applied when changing the timber buying company. The most sensitive groups to changing timber buyer were 60-69 year old, entrepreneurs, men, and owners of forest holdings between 20-29 hectares, owners of inherited forests and joint forest ownerships. The forest owners assessed the timber buying company's operations and its staff on the basis of the last timber sale. The forest owners gave best values for the timber buyer's reliability, the purchase of all timber assortments and the timber buyers' reputation. The worst values were given for cross-cutting and response to complaints. No less than 95 percent of forest owners were prepared to recommend their timber trade partner to acquaintances, friends or other forest owners. Yet only half of the forest owners recognized that their last timber sale experience would not affect which company will be selected for the nest timber sale process

  6. Timber Products Supply and Demand

    Science.gov (United States)

    Jeffrey P. Prestemon; Robert C. Abt

    2002-01-01

    This chapter describes historical, current, and projected timber inventories and timber product outputs from southern forests. It also attempts to place these quantities in national and international perspectives. Timber is the most valuable commercial commodity taken from most forests, and its removal strongly influences the character of those forests. Timber is...

  7. Timber in Bridge Structures

    OpenAIRE

    Detkin, Viktoria

    2016-01-01

    The purpose of this final year project was to study the properties of timber as a structural material and the suitability of wood in load bearing members for bridge structures. For a case study, an existing timber bridge was selected. Due to its condition the bridge should be replaced. The design of a new bridge with steel beams holding a glulam deck was made. During the case study the replacement of steel beams by glulam timber ones was discussed. Some calculations were made in order to ...

  8. Metabolites and hormones are involved in the intraspecific variability of drought hardening in radiata pine.

    Science.gov (United States)

    De Diego, N; Saiz-Fernández, I; Rodríguez, J L; Pérez-Alfocea, P; Sampedro, M C; Barrio, R J; Lacuesta, M; Moncaleán, P

    2015-09-01

    Studies of metabolic and physiological bases of plant tolerance and hardening against drought are essential to improve genetic breeding programs, especially in productive species such as Pinus radiata. The exposure to different drought cycles is a highly effective tool that improves plant conditioning, but limited information is available about the mechanisms that modulate this process. To clarify this issue, six P. radiata breeds with well-known differences in drought tolerance were analyzed after two consecutive drought cycles. Survival rate, concentration of several metabolites such as free soluble amino acids and polyamines, and main plant hormones varied between them after drought hardening, while relative growth ratio and water potential at both predawn and dawn did not. Hardening induced a strong increase in total soluble amino acids in all breeds, accumulating mainly those implicated in the glutamate metabolism (GM), especially L-proline, in the most tolerant breeds. Other amino acids from GM such as γ-aminobutyric acid (GABA) and L-arginine (Arg) were also strongly increased. GABA pathway could improve the response against drought, whereas Arg acts as precursor for the synthesis of spermidine. This polyamine showed a positive relationship with the survival capacity, probably due to its role as antioxidant under stress conditions. Finally, drought hardening also induced changes in phytohormone content, showing each breed a different profile. Although all of them accumulated indole-3-acetic acid and jasmonic acid and reduced zeatin content in needles, significant differences were observed regarding abscisic acid, salicylic acid and mainly zeatin riboside. These results confirm that hardening is not only species-dependent but also an intraspecific processes controlled through metabolite changes. Copyright © 2015 Elsevier GmbH. All rights reserved.

  9. Ecological impacts of long-term application of biosolids to a radiata pine plantation

    International Nuclear Information System (INIS)

    Xue, Jianming; Kimberley, Mark O.; Ross, Craig; Gielen, Gerty; Tremblay, Louis A.; Champeau, Olivier; Horswell, Jacqui; Wang, Hailong

    2015-01-01

    Assessment of the ecological impact of applying biosolids is important for determining both the risks and benefits. This study investigated the impact on soil physical, chemical and biological properties, tree nutrition and growth of long-term biosolids applications to a radiata pine (Pinus radiata D. Don) plantation growing on a Sandy Raw Soil in New Zealand. Biosolids were applied to the trial site every 3 years from tree age 6 to 19 years at three application rates: 0 (Control), 300 (Standard) and 600 (High) kg nitrogen (N) ha −1 , equivalent to 0, 3 and 6 Mg ha −1 of dry biosolids, respectively. Tree nutrition status and growth have been monitored annually. Soil samples were collected 13 years after the first biosolids application to assess the soil properties and functioning. Both the Standard and High biosolids treatments significantly increased soil (0–50 cm depth) total carbon (C), N, and phosphorus (P), Olsen P and cation exchange capacity (CEC), reduced soil pH, but had no significant effects on soil (0–20 cm depth) physical properties including bulk density, total porosity and unsaturated hydraulic conductivity. The High biosolids treatment also increased concentrations of soil total cadmium (Cd), chromium (Cr), copper (Cu) and lead (Pb) at 25–50 cm depth, but these concentrations were still considered very low for a soil. Ecotoxicological assessment showed no significant adverse effects of biosolids application on either the reproduction of springtails (Folsomia candida) or substrate utilisation ability of the soil microbial community, indicating no negative ecological impact of bisolids-derived heavy metals or triclosan. This study demonstrated that repeated application of biosolids to a plantation forest on a poor sandy soil could significantly improve soil fertility, tree nutrition and pine productivity. However, the long-term fate of biosolids-derived N, P and litter-retained heavy metals needs to be further monitored in the receiving

  10. Ecological impacts of long-term application of biosolids to a radiata pine plantation

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Jianming, E-mail: jianming.xue@scionresearch.com [Scion, Private Bag 29237, Christchurch (New Zealand); Kimberley, Mark O., E-mail: mark.kimberley@scionresearch.com [Scion, Private Bag 3020, Rotorua (New Zealand); Ross, Craig, E-mail: rossc@landcareresearch.co.nz [Landcare, Private Bag 11052, Palmerston North (New Zealand); Gielen, Gerty, E-mail: gerty.gielen@scionresearch.com [Scion, Private Bag 3020, Rotorua (New Zealand); Tremblay, Louis A., E-mail: louis.tremblay@cawthron.org.nz [Cawthron Institute, Private Bag 2, Nelson (New Zealand); School of Biological Sciences, University of Auckland, PO Box 92019, Auckland 1142 (New Zealand); Champeau, Olivier, E-mail: olivier.champeau@cawthron.org.nz [Cawthron Institute, Private Bag 2, Nelson (New Zealand); Horswell, Jacqui, E-mail: jacqui.horswell@esr.cri.nz [ESR, P O Box 50-348, Porirua (New Zealand); Wang, Hailong, E-mail: hailong@zafu.edu.cn [Scion, Private Bag 3020, Rotorua (New Zealand); Key Laboratory of Soil Contamination Bioremediation of Zhejiang Province, Zhejiang Agricultural and Forestry University, Lin' an, Hangzhou, Zhejiang Province 311300 (China)

    2015-10-15

    Assessment of the ecological impact of applying biosolids is important for determining both the risks and benefits. This study investigated the impact on soil physical, chemical and biological properties, tree nutrition and growth of long-term biosolids applications to a radiata pine (Pinus radiata D. Don) plantation growing on a Sandy Raw Soil in New Zealand. Biosolids were applied to the trial site every 3 years from tree age 6 to 19 years at three application rates: 0 (Control), 300 (Standard) and 600 (High) kg nitrogen (N) ha{sup −1}, equivalent to 0, 3 and 6 Mg ha{sup −1} of dry biosolids, respectively. Tree nutrition status and growth have been monitored annually. Soil samples were collected 13 years after the first biosolids application to assess the soil properties and functioning. Both the Standard and High biosolids treatments significantly increased soil (0–50 cm depth) total carbon (C), N, and phosphorus (P), Olsen P and cation exchange capacity (CEC), reduced soil pH, but had no significant effects on soil (0–20 cm depth) physical properties including bulk density, total porosity and unsaturated hydraulic conductivity. The High biosolids treatment also increased concentrations of soil total cadmium (Cd), chromium (Cr), copper (Cu) and lead (Pb) at 25–50 cm depth, but these concentrations were still considered very low for a soil. Ecotoxicological assessment showed no significant adverse effects of biosolids application on either the reproduction of springtails (Folsomia candida) or substrate utilisation ability of the soil microbial community, indicating no negative ecological impact of bisolids-derived heavy metals or triclosan. This study demonstrated that repeated application of biosolids to a plantation forest on a poor sandy soil could significantly improve soil fertility, tree nutrition and pine productivity. However, the long-term fate of biosolids-derived N, P and litter-retained heavy metals needs to be further monitored in the

  11. The genetics of shortleaf pine (Pinus echinata mill.) with implications for restoration and management

    Science.gov (United States)

    John F. Stewart; Rodney E. Will; Barbara S. Crane; C. Dana Nelson

    2016-01-01

    Shortleaf pine (Pinus echinata Mill.) is an important commercial timber resource and forest ecosystem component in the southeastern USA. The species occurs in mainly drier sites as an early- to mid-successional species, is fireadapted, and it plays an important role in the fire ecology of the region. However, shortleaf pine genetics are not well-studied, especially in...

  12. Timber resources of southwest Oregon.

    Science.gov (United States)

    Patricia M. Bassett

    1979-01-01

    This report presents statistics from a 1973 inventory of timber resources of Douglas County and from a 1974 inventory of timber resources of Coos, Curry, Jackson, and Josephine Counties, Oregon. Tables presented are of forest area and of timber volume, growth, and mortality.

  13. Timber frame walls

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2010-01-01

    A ventilated cavity is usually considered good practice for removing moisture behind the cladding of timber framed walls. Timber frame walls with no cavity are a logical alternative as they are slimmer and less expensive to produce and besides the risk of a two-sided fire behind the cladding....... It was found that the specific damages made to the vapour barrier as part of the test did not have any provable effect on the moisture content. In general elements with an intact vapour barrier did not show a critical moisture content at the wind barrier after four years of exposure....

  14. Hylastes ater (Curculionidae: Scolytinae Affecting Pinus radiata Seedling Establishment in New Zealand

    Directory of Open Access Journals (Sweden)

    Stephen D. Reay

    2012-01-01

    Full Text Available The introduced pine bark beetle Hylastes ater has been present in New Zealand for around 100 years. The beetle has been a minor pest on pines. Research was undertaken to control the pest in the 1950s–1970s, with a biological control agent introduced with limited success. Following a reasonably long period with minimal research attention, renewed interest in developing a better understanding of the pest status was initiated in the mid to late 1990s. Subsequently, a significant amount of research was undertaken, with a number of studies exploring the role of this pest of exotic forests in New Zealand. These studies ranged from attempting to quantify damage to seedlings, evaluate the role of the beetle in vectoring sapstain fungi, explore options for management, and evaluate the potential for chemical and biological control. From these studies, a number of findings were made that are relevant to the New Zealand exotic forest industry and shed new light onto the role of secondary bark beetles globally.

  15. MICROINJERTO IN VITRO COMO UNA TECNICA DE REVIGORIZACION DE ARBOLES ELITES DE PINUS RADIATA D. DON.

    OpenAIRE

    MATERAN OVIEDO, MARIA ELENA; MATERAN OVIEDO, MARIA ELENA

    2008-01-01

    Es bien conocido, que los ciclos de vida de muchas especies perennes comprenden dos fases en las que determinadas características morfológicas y fisiológicas son bastante distintas. Después de la germinación, la mayoría de las plántulas anuales y perennes 106p.

  16. Solute accumulation and elastic modulus changes in six radiata pine breeds exposed to drought.

    Science.gov (United States)

    De Diego, N; Sampedro, M C; Barrio, R J; Saiz-Fernández, I; Moncaleán, P; Lacuesta, M

    2013-01-01

    Drought is one of the main abiotic factors that determine forest species growth, survival and productivity. For this reason, knowledge of plant drought response and the identification of physiological traits involved in stress tolerance will be of interest to breeding programs. In this work, several Pinus radiata D. Don breeds from different geographical origins were evaluated along a water stress period (4 weeks) and subsequent rewatering (1 week), showing different responses among them. Leaf water potential (Ψ(leaf)) and osmotic potential decreases were accompanied by a variation in the total relative water content (RWC, %). The most tolerant breeds presented the lowest leaf water potential and RWC at turgor loss point, and showed the lowest elastic modulus (ε) values. A high ε value was a characteristic of a less-drought-tolerant plant and was related to membrane alterations (high electrolyte leakage percentages) that could favor cell water loss. Of the group of solutes that contributed to osmotic adjustment, soluble carbohydrates were the most abundant, although stressed plants also increased their content of free amino acids [mainly proline (Pro) and glutamic acid (Glu), and γ-aminobutyric acid (GABA)] and free polyamines. In addition, the most sensitive breeds had a higher GABA/Glu ratio. After rewatering, Pro and GABA were higher in rehydrated plants than in controls.

  17. Design of timber groynes

    NARCIS (Netherlands)

    Perdok, U.; Crossman, M.; Verhagen, H.J.; Howard, S.; Simm, J.

    2003-01-01

    The performance and durability of timber groynes (or 'groins') is highly dependent on the design and detailing of the structure. Using knowledge and experience developed over generations an effective functional design can be achieved, which may ultimately result in lower whole life costs and provide

  18. Industrialized timber structures.

    Science.gov (United States)

    1974-01-01

    It was recently learned that a number of innovations in structural timber components are available to the construction industry, but that they were largely unknown to bridge designers. The purpose of this study was to develop for the Department a fea...

  19. Growing Timber Structures

    DEFF Research Database (Denmark)

    Tamke, Martin; Evers, Henrik Leander; Stasiuk, David

    2013-01-01

    The contemporary design of timber structures has to answer questions concerning structural stability, production impact and energy implications in ever earlier stages. The interrelation of these levels creates a complexity that is difficult to resolve through contemporary linear parametric...... to integrate the behaviour of networked systems into structures made from wooden material....

  20. Revivification of a method for identifying longleaf pine timber and its application to southern pine relicts in southeastern Virginia

    Science.gov (United States)

    Thomas L. Eberhardt; Philip M. Sheridan; Arvind A.R. Bhuta

    2011-01-01

    Abstract: Longleaf pine (Pinus palustris Mill.) cannot be distinguished from the other southern pines based on wood anatomy alone. A method that involves measuring pith and second annual ring diameters, reported by Arthur Koehler in 1932 (The Southern Lumberman, 145: 36–37), was revisited as an option for identifying longleaf pine timbers and stumps. Cross-section...

  1. Selection and evaluation of Rhizobial strains of Vigna radiata L ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-10-20

    Oct 20, 2008 ... Selection and evaluation of Rhizobial strains of Vigna radiata L. beneficial to ... This study aimed to select suitable strains that can be used as inoculants to enhance legume production and simultaneously reduce the use of ... contributor to natural or biological N2 fixation and allows legumes to grow in the ...

  2. Analysis of the strength and stiffness of timber beams reinforced with carbon fiber and glass fiber

    Directory of Open Access Journals (Sweden)

    Juliano Fiorelli

    2003-06-01

    Full Text Available An experimental analysis of pinewood beams (Pinus caribea var hondurensis reinforced with glass and/or carbon fibers is discussed. The theoretical model employed to calculate the beam's bending strength takes into account the timber's ultimate limit states of tensile strength and failure by compression, considering a model of fragile elastic tension and plastic elastic compression. The validity of the theoretical model is confirmed by a comparison of the theoretical and experimental results, while the efficiency of the fiber reinforcement is corroborated by the increased strength and stiffness of the reinforced timber beams.

  3. Firewood and timber in the Argaric site of Barranco de la Viuda (Lorca, Murcia

    Directory of Open Access Journals (Sweden)

    María Soledad GARCÍA MARTÍNEZ

    2011-10-01

    Full Text Available This paper presents the analysis of wood charcoals associated to combustion structures and building materials from the Argaric site of Barranco de la Viuda. The results suggest that wood fuel was collected in nearby pine forest, noting especially Pinus halepensis, together with Rosmarinus officinalis, Olea europaea, Pistacia lentiscus and Monocotyledoneae. Opportunistic exploitation prevailed on all types of firing activities. Pinus halepensis was also the most commonly wood used as timber. Remarkable is the limited use of the riparian vegetation on firing and building activities.

  4. The 1993 RPA timber assessment update

    Science.gov (United States)

    Richard W. Haynes; Darius M. Adams; John R. Mills

    1995-01-01

    This update reports changes in the Nation's timber resource since the 1989 RPA timber assessment. The timber resource situation is analyzed to provide projections for future cost and availability of timber products to meet demands. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These include changes...

  5. Global sustainable timber supply and demand

    Science.gov (United States)

    Peter J. Ince

    2010-01-01

    Industrial timber use has provided timber revenue that has helped make timber supply and demand more sustainable in the leading timber producing regions of the world. Sustainable development implies not consuming more resources today than we can replace tomorrow, but sustainable forest management implies more than merely a non-declining supply of timber. Forests as a...

  6. Timber resources of Ohio

    Science.gov (United States)

    Neal P. Kingsley; Carl E. Mayer

    1970-01-01

    Under the authority of the McSweeney-McNary Forest Research Act of May 22, 1928, and subsequent amendments, the Forest Service, U. S. Department of Agriculture, conducts a series of continuing forest surveys of all states to provide up-to-date information about the forest resources of the Nation. A resurvey of the timber resources of Ohio was made in 1966 and 1967 by...

  7. Historic timber roof structures

    OpenAIRE

    Magina, Miguel Jorge

    2013-01-01

    Dissertação para obtenção do Grau de Mestre em Engenharia Civil – Estruturas e Geotecnia This dissertation covers the study of historic timber roof structures in Transylvania area - Romania, the structures type, its elements and connection variety between them. Procedures to study a structure of this category are approached. It is also referred semi and non-destructive tests that can be done to better understand the present wood characteristics, and potential reparation or strengthening...

  8. Curved Folded Plate Timber Structures

    OpenAIRE

    Buri, Hans Ulrich; Stotz, Ivo; Weinand, Yves

    2011-01-01

    This work investigates the development of a Curved Origami Prototype made with timber panels. In the last fifteen years the timber industry has developed new, large size, timber panels. Composition and dimensions of these panels and the possibility of milling them with Computer Numerical Controlled machines shows great potential for folded plate structures. To generate the form of these structures we were inspired by Origami, the Japanese art of paper folding. Common paper tessellations are c...

  9. Monitoring of timber structures: Editorial

    OpenAIRE

    Kurz, Jochen Horst

    2015-01-01

    Timber structures have been in use for centuries, with proven durability. In recent years, timber has become particularly important, due to its standing as a truly renewable material for construction and carbon storage purposes. The material behaviour of wood is known and understood. The current design concepts for timber structures are also well developed. Nevertheless, the underlying processes of the ageing and deterioration of wood are complex, and the anisotropic structure of wood require...

  10. The effects of high energy radiation on the pulping properties of Pinus radiation and Eucalyptus regnans

    International Nuclear Information System (INIS)

    McLaren, K.G.; Garland, C.P.; Higgins, H.G.

    1976-01-01

    Studies have been made of the effects of high energy radiation on the pulping behaviour of Eucalyptus regnans and Pinus radiata. Pre-irradiation of wood chips with small doses of 60 Co gamma radiation (up to about 0.2 Mrad) caused little degradation of the cellulose, and had only minor effects on the kraft pulping properties of both wood species. Pulp yield, Kappa number and strength properties of the pulps showed little change. There was also little effect on the bisulphite cooking of Pinus radiata. As the dose was increased to 1 Mrad, degradation of cellulose (as indicated by degree of polymerisation measurements) became significant, and Kraft pulp yields from both woods showed small reductions. The Kappa number and physical properties of these pulps were little affected at this dose level. A gamma radiation dose of 10 Mrad produced marked depolymerisation of the cellulose, and big reductions in kraft and neutral sulphite semi-chemical pulp yields. The kraft pulps showed a much higher lignin content. Some low dose (0.15 Mrad) irradiations on thin chips were carried out with a 1 MeV electron accelerator. In contrast to comparable gamma irradiations, this treatment produced discernible changes in kraft pulping behaviour. The pulp yield, under the same cooking conditions, appears to be slightly higher, but the Lignin content of the pulp was increased. (Author)

  11. Timber management planning with timber ram and goal programming

    Science.gov (United States)

    Richard C. Field

    1978-01-01

    By using goal programming to enhance the linear programming of Timber RAM, multiple decision criteria were incorporated in the timber management planning of a National Forest in the southeastern United States. Combining linear and goal programming capitalizes on the advantages of the two techniques and produces operationally feasible solutions. This enhancement may...

  12. Timber floors strengthened with concrete

    NARCIS (Netherlands)

    Blass, H.J.; Linden, M.L.R. van der; Schlager, M.

    1998-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are not new (Pokulka, 1997) and form a simple and practical solution, they are not widely adopted. One of the reasons for this is the Jack of uniform design rules. In this research

  13. Timber designers' manual

    CERN Document Server

    Ozelton, E C

    2008-01-01

    This major reference manual covers both overall and detail design of structural timber, including aspects such as shear deflection, creep, dynamic and lateral stability considerations for flexural members.Available for the first time in paperback, the Third Edition was substantially revised to take account of the many changes since the previous edition was published in 1984. It is based on British Standard BS 5268-2: 2002, which brought design concepts closer to European practice and Eurocode 5.Features of the Third Edition include:* information on bolt values including

  14. Transcriptional Slippage and RNA Editing Increase the Diversity of Transcripts in Chloroplasts: Insight from Deep Sequencing of Vigna radiata Genome and Transcriptome.

    Directory of Open Access Journals (Sweden)

    Ching-Ping Lin

    Full Text Available We performed deep sequencing of the nuclear and organellar genomes of three mungbean genotypes: Vigna radiata ssp. sublobata TC1966, V. radiata var. radiata NM92 and the recombinant inbred line RIL59 derived from a cross between TC1966 and NM92. Moreover, we performed deep sequencing of the RIL59 transcriptome to investigate transcript variability. The mungbean chloroplast genome has a quadripartite structure including a pair of inverted repeats separated by two single copy regions. A total of 213 simple sequence repeats were identified in the chloroplast genomes of NM92 and RIL59; 78 single nucleotide variants and nine indels were discovered in comparing the chloroplast genomes of TC1966 and NM92. Analysis of the mungbean chloroplast transcriptome revealed mRNAs that were affected by transcriptional slippage and RNA editing. Transcriptional slippage frequency was positively correlated with the length of simple sequence repeats of the mungbean chloroplast genome (R2=0.9911. In total, 41 C-to-U editing sites were found in 23 chloroplast genes and in one intergenic spacer. No editing site that swapped U to C was found. A combination of bioinformatics and experimental methods revealed that the plastid-encoded RNA polymerase-transcribed genes psbF and ndhA are affected by transcriptional slippage in mungbean and in main lineages of land plants, including three dicots (Glycine max, Brassica rapa, and Nicotiana tabacum, two monocots (Oryza sativa and Zea mays, two gymnosperms (Pinus taeda and Ginkgo biloba and one moss (Physcomitrella patens. Transcript analysis of the rps2 gene showed that transcriptional slippage could affect transcripts at single sequence repeat regions with poly-A runs. It showed that transcriptional slippage together with incomplete RNA editing may cause sequence diversity of transcripts in chloroplasts of land plants.

  15. Computer Vision for Timber Harvesting

    DEFF Research Database (Denmark)

    Dahl, Anders Lindbjerg

    The goal of this thesis is to investigate computer vision methods for timber harvesting operations. The background for developing computer vision for timber harvesting is to document origin of timber and to collect qualitative and quantitative parameters concerning the timber for efficient harvest...... segments. The purpose of image segmentation is to make the basis for more advanced computer vision methods like object recognition and classification. Our second method concerns image classification and we present a method where we classify small timber samples to tree species based on Active Appearance...... to the development of the logTracker system the described methods have a general applicability making them useful for many other computer vision problems....

  16. Probabilistic modeling of timber structures

    DEFF Research Database (Denmark)

    Köhler, Jochen; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2007-01-01

    The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) [Joint Committee of Structural Safety. Probabilistic Model Code, Internet...... Publication: www.jcss.ethz.ch; 2001] and of the COST action E24 ‘Reliability of Timber Structures' [COST Action E 24, Reliability of timber structures. Several meetings and Publications, Internet Publication: http://www.km.fgg.uni-lj.si/coste24/coste24.htm; 2005]. The present proposal is based on discussions...... and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for timber components. The recommended probabilistic model for these basic properties...

  17. The impact of ultraviolet radiation on timber

    International Nuclear Information System (INIS)

    Dawson, B.

    1993-01-01

    Photochemical degradation of timber, the outcome of exposure of timber to ultraviolet radiation, is a light induced chemical and physical decay. Timber is a collection of dead wood cells. Impacts of radiation on the growing tree are therefore outside the scope of this paper, which is primarily concerned with timber as a material. (author). 5 refs. 2 figs

  18. Dynamics of Timber Market Integration in Sweden

    Directory of Open Access Journals (Sweden)

    Vishal Chandr Jaunky

    2015-12-01

    Full Text Available This paper addresses the performance of the timber markets (Scots pine, Pinus silvestris L. and Norway spruce, Picea abies (L. Karst. by evaluating the order of market integration in three Swedish regions (Central, Northern, and Southern. Quarterly data of delivery prices are employed over the period 1999Q1–2012Q4. Various unit root and cointegration tests have been computed. The results indicate that the variables are integrated of first order and co-integrated, especially after controlling for structural breaks. This supports the law-of-one-price hypothesis (LOP. However, the effects of structural shocks on forestry are arguably significant and these are controlled for while performing a vector error-correction mechanism (VECM-based Granger-causality test. Bi-directional causality between the Northern and central markets is uncovered in the short-run. In the long-run, a similar causal effect is detected between Northern and Southern markets while the central market emerges as the price leader. Further investigation is carried out using variance decompositions and impulse response functions and these approaches also tend to confirm the existence of a single market well, as price interdependence between markets.

  19. Probabilistic Modeling of Timber Structures

    DEFF Research Database (Denmark)

    Köhler, J.D.; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2005-01-01

    The present paper contains a proposal for the probabilistic modeling of timber material properties. It is produced in the context of the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS) and of the COST action E24 'Reliability of Timber Structures'. The present...... proposal is based on discussions and comments from participants of the COST E24 action and the members of the JCSS. The paper contains a description of the basic reference properties for timber strength parameters and ultimate limit state equations for components and connections. The recommended...

  20. Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; čizmar, D.

    2010-01-01

    The present paper outlines results from working group 3 (WG3) in the EU COST Action E55 – ‘Modelling of the performance of timber structures’. The objectives of the project are related to the three main research activities: the identification and modelling of relevant load and environmental...... exposure scenarios, the improvement of knowledge concerning the behaviour of timber structural elements and the development of a generic framework for the assessment of the life-cycle vulnerability and robustness of timber structures....

  1. Hinged roof timber

    Energy Technology Data Exchange (ETDEWEB)

    Shestov, P I; Golub, A G; Yefremov, V I

    1980-08-07

    A hinged roof timer is suggested which includes a beam with prong and loop on the end which have openings in the form of ring slits for the distance wedges and round for the pins. In this case the opening of the distance wedge in the ring is arranged in relation to the opening for the pin closer to the end of the beam, and in the prong, in the opposite order. In order to improve the operating quality by guaranteeing active support of the cantilever roof timber without increasing its overall dimensions for the height of the opening for the distance wedge in the prong and the ring, beams are arranged axisymmetrically to the longitudinal axis.

  2. Grip for sawing round timber

    Energy Technology Data Exchange (ETDEWEB)

    1982-07-01

    This paper describes a device development at Gedling Colliery, Nottinghamshire Area, United Kingdom. It is a gripping attachment, designed to overcome the safety hazards involved in cross cutting timbers with a circular saw.

  3. FRP reinforcement of timber structures

    OpenAIRE

    Schober, Kay-Uwe; Harte, Annette M.; Kliger, Robert; Jockwer, Robert; Xu, Qingfeng; Chen, Jian-Fei

    2015-01-01

    Timber engineering has advanced over recent decades to offer an alternative to traditional materials and methods. The bonding of fibre reinforced plastics (FRP) with adhesives to timber structures for repair and strengthening has many advantages. However, the lack of established design rules has strongly restrained the use of FRP strengthening in many situations, where these could be a preferable option to most traditional techniques. A significant body of research has been carried out in rec...

  4. Metabolism of 14C-aspartate during shoot bud formation in cultured cotyledon explants of radiata pine

    International Nuclear Information System (INIS)

    Konschuh, M.N.; Thorpe, T.A.

    1997-01-01

    Aspartate metabolism was investigated in excised cotyledons of radiata pine (Pinus radiate D. Don). These cotyledons were cultured under shoot-forming (plus N 6 -benzyladenine, SF), non-shoot-forming (minus N 6 -benzyladenine, NSF) and unresponsive (plus N 6 -benzyladenine, OLD) conditions, then incubated with [ 14 C]-aspartate for 3-h pulse treatments followed by 3-h chase treatments with cold aspartate. The majority of label was recovered in the CO 2 , amino acid, organic acid and pellet fractions. Uptake was greatest in all tissue types early in culture. Most (over 80%) of the [ 14 C 9-aspartate taken up by the tissues was converted to CO 2 at day 0 in SF and NSF tissues. CO 2 accounted for less than 50% of the total radioactivity in other tissues. Greater incorporation into fractions was observed in SF tissues during promeristemoid formation, while in NSF tissues the greatest incorporation was observed during a period of rapid elongation. Generally, less incorporation was observed in OLD cotyledons than in SF and NSF cotyledons. Analysis of the amino acid fraction showed that labelled aspartate was converted to other amino acids, mainly glutamate, glutamine, asparagine and 4-aminobutyric acid. (au)

  5. characterisation and grading of two selected timber species grown

    African Journals Online (AJOL)

    HOD

    Structural timber is the timber used in framing and load bearing ... The main challenge in design with timber as structural member is to .... is the classification of timber based on particular ..... Azadirachta indica leaf extract on serum lipid profile.

  6. Timber resource statistics for southwest Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1981-01-01

    This report summarizes a 1978 timber-resource inventory of six counties in southwest Washington: Clark, Cowlitz, Lewis, Pacific, Skamania, and Wahkiakum. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  7. Timber resource statistics for eastern Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1983-01-01

    This report summarizes a 1980 timber resource inventory of the 16 forested counties in Washington east of the crest of the Cascade Range. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  8. The timber resources of Rhode Island

    Science.gov (United States)

    Roland H. Ferguson; John R. McGuire; John R. McGuire

    1957-01-01

    This is a report on the first comprehensive survey ever made of the timber resources of Rhode Island. It shows, for the years 1952 and 1953, the area and condition of the forest land, the volume and quality of standing timber, the rates of timber growth and mortality, and the extent of timber cutting for forest products. The survey was made by the Forest Service as...

  9. Collapse Analysis of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2008-01-01

    of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obtained. Therefore the structure can be considered......A probabilistic based collapse analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

  10. The 2005 RPA timber assessment update.

    Science.gov (United States)

    Richard W. Haynes; Darius M. Adams; Ralph J. Alig; Peter J. Ince; John R. Mills; Xiaoping. Zhou

    2007-01-01

    This update reports changes in the Nation's timber resource since the Analysis of the Timber Situation in the United States was completed in 2003. Prospective trends in demands for and supplies of timber, and the factors that affect these trends are examined. These trends include changes in the U.S. economy, increased salvage of British Columbia beetle-killed...

  11. Control of borens in mine timbers

    Energy Technology Data Exchange (ETDEWEB)

    Yule, R A; Kennedy, M J

    1978-07-01

    The authors studied timber attack in Queensland mines by auger beetles and powder post beetles. When infested timber is taken into a mine the insects thrive at the temperatures (20 to 25 C) and relative humidities (70-90%) they encounter. Seven timber treatments were tested, and all were satisfactory except spraying with wood-preserving oil which contained a moderately effective insecticide.

  12. General notes on ductility in timber structures

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Fragiacomo, M.

    2011-01-01

    The paper discusses the implications of ductility in design of timber structures under static and dynamic loading including earthquakes. Timber is a material inherently brittle in bending and in tension, unless reinforced adequately. However connections between timber members can exhibit significant

  13. Timber resource statistics for eastern Washington, 1995.

    Science.gov (United States)

    Neil McKay; Patricia M. Bassett; Colin D. MacLean

    1995-01-01

    This report summarizes a 1990-91 timber resource inventory of Washington east of the crest of the Cascade Range. The inventory was conducted on all private and public lands except National Forests. Timber resource statistics from National Forest inventories also are presented. Detailed tables provide estimates of forest area, timber volume, growth, mortality, and...

  14. Global timber investments, wood costs, regulation, and risk

    International Nuclear Information System (INIS)

    Cubbage, Frederick; Koesbandana, Sadharga; Gonzalez, Ronalds; Carrero, Omar; MacIntyre, Charles; Abt, Robert; Phillips, Richard; Mac Donagh, Patricio; Rubilar, Rafael; Balmelli, Gustavo; Olmos, Virginia Morales; De La Torre, Rafael; Murara, Mauro; Hoeflich, Vitor Afonso; Kotze, Heynz; Frey, Gregory; Adams, Thomas; Turner, James; Lord, Roger; Huang, Jin; McGinley, Kathleen

    2010-01-01

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America - Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay - were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each country, with most having Internal Rates of Return (IRRs) of 20% per year or more, as did teak. Pinus species in South America were generally closer to 15%, except in Argentina, where they were 20%. IRRs were less, but still attractive for plantations of coniferous or deciduous species in China, South Africa, New Zealand, Indonesia, and the United States, ranging from 7% to 12%. Costs of wood production at the cost of capital of 8% per year were generally cheapest for countries with high rates of return and for pulpwood fiber production, which would favor vertically integrated firms in Latin America. But wood costs at stumpage market prices were much greater, making net wood costs for open market wood more similar among countries. In the Americas, Chile and Brazil had the most regulatory components of sustainable forest management, followed by Misiones, Argentina and Oregon in the U.S. New Zealand, the United States, and Chile had the best rankings regarding risk from political, commercial, war, or government actions and for the ease of doing business. Conversely, Venezuela, Indonesia, Colombia, and Argentina had high risk ratings, and Brazil, Indonesia, and Venezuela were ranked as more difficult countries for ease of business. (author)

  15. Global timber investments, wood costs, regulation, and risk

    Energy Technology Data Exchange (ETDEWEB)

    Cubbage, Frederick; Koesbandana, Sadharga; Gonzalez, Ronalds; Carrero, Omar; MacIntyre, Charles; Abt, Robert; Phillips, Richard [Forestry and Environmental Resources, North Carolina State University, Raleigh, NC (United States); Mac Donagh, Patricio [Universidad Nacional de Misiones (UNAM), Lisandro de la Torre s/n, CP 3380, Eldorado, Misiones (Argentina); Rubilar, Rafael [Universidad de Concepcion, Victoria 631, Casilla 160-C - Correo 3, Concepcion (Chile); Balmelli, Gustavo [Instituto Nacional de Investigacion Agropecuria, INIA Tacuarembo, Ruta 5, Km 386, Tacuarembo (Uruguay); Olmos, Virginia Morales [Weyerhaeuser Company, La Rosa 765, Melo (Uruguay); De La Torre, Rafael [CellFor, 247 Davis Street, Athens, GA (United States); Murara, Mauro [Universidade do Contestado, R. Joaquim Nabuco, 314 Bairro Cidade Nova, Porto Uniao, Santa Catarina (Brazil); Hoeflich, Vitor Afonso [Universidade Federal do Parana, Av. Pref. Lothario Meissner, 900, 80210-170, Jardim Botanico, Curitiba, Parana (Brazil); Kotze, Heynz [Komatiland Forests (Pty) Ltd, P.O. Box 14228, Nelspruit (South Africa); Frey, Gregory [World Bank, 1818 H. Street NW, Washington, DC (United States); Adams, Thomas; Turner, James [New Zealand Forest Research Institute Ltd., Scion, 49 Sala St., Rotorua (New Zealand); Lord, Roger [Mason, Bruce, and Girard, Inc., 707 SW Washington St., Portland, Oregon (United States); Huang, Jin [Abt Associates, 4550 Montgomery Avenue, Bethesda, MD (United States); McGinley, Kathleen [International Institute of Tropical Forestry, USDA Forest Service, c/o 920 Main Campus Dr. Suite 300, Raleigh, NC (United States)

    2010-12-15

    We estimated financial returns and wood production costs in 2008 for the primary timber plantation species. Excluding land costs, returns for exotic plantations in almost all of South America - Brazil, Argentina, Uruguay, Chile, Colombia, Venezuela, and Paraguay - were substantial. Eucalyptus species returns were generally greater than those for Pinus species in each country, with most having Internal Rates of Return (IRRs) of 20% per year or more, as did teak. Pinus species in South America were generally closer to 15%, except in Argentina, where they were 20%. IRRs were less, but still attractive for plantations of coniferous or deciduous species in China, South Africa, New Zealand, Indonesia, and the United States, ranging from 7% to 12%. Costs of wood production at the cost of capital of 8% per year were generally cheapest for countries with high rates of return and for pulpwood fiber production, which would favor vertically integrated firms in Latin America. But wood costs at stumpage market prices were much greater, making net wood costs for open market wood more similar among countries. In the Americas, Chile and Brazil had the most regulatory components of sustainable forest management, followed by Misiones, Argentina and Oregon in the U.S. New Zealand, the United States, and Chile had the best rankings regarding risk from political, commercial, war, or government actions and for the ease of doing business. Conversely, Venezuela, Indonesia, Colombia, and Argentina had high risk ratings, and Brazil, Indonesia, and Venezuela were ranked as more difficult countries for ease of business. (author)

  16. Mechanism of Resistance in Mungbean [Vigna radiata (L. R. Wilczek var. radiata] to bruchids, Callosobruchus spp. (Coleoptera: Bruchidae

    Directory of Open Access Journals (Sweden)

    Abdul R. War

    2017-06-01

    Full Text Available Mungbean [Vigna radiata (L. R. Wilczek var. radiata] is an important pulse crop in Asia, and is consumed as dry seeds and as bean sprouts. It is an excellent source of digestible protein. Bruchids [Callosobruchus chinensis (L. and Callosobruchus maculatus (F.] are the important pests of mungbean and cause damage in the field and in storage. Bruchid infestation reduces the nutritional and market value of the grain and renders seeds unfit for human consumption, agricultural and commercial uses. These pests are controlled mainly by fumigation with highly toxic chemicals such as carbon disulfide, phosphene, and methyl bromide, or by dusting with several other insecticides, which leave residues on the grain, thus, threatening food safety. Some plant-based extracts have been found useful in controlling bruchids, but are not fully successful due to their short-term activity, rapid degradability, and potentially negative effect on seed germination. Although some wild sources of bruchid resistance in mungbean have been reported, which have been used to develop bruchid- resistant lines, undesirable genetic linkages threaten the proper exploitation of genetic diversity from wild germplasm into commercial cultivars. Further, biotype variation in bruchids has rendered some mungbean lines susceptible that otherwise would have been resistant to the pest. Host plant resistance is a cost-effective and a safe alternative to control bruchids in mungbean and is associated with morphological, biochemical, and molecular traits. These traits affect insect growth and development, thereby, reduce the yield losses by the pests. Understanding the defense mechanisms against insect pests could be utilized in exploiting these traits in crop breeding. This review discusses different traits in mungbean involved in defense against bruchids and their utility in pest management. We also highlight the breeding constraints for developing bruchid-resistant mungbean and how can these

  17. Evaluation of recycled timber members

    Science.gov (United States)

    Douglas R. Rammer

    1999-01-01

    An experimental study was conducted to evaluate the residual shear capacity of large Douglas-fir timbers used in a military facility in Ardeen Hills, MN. A S-point and 4-point bending test was used to determine the effects of checks and splits on the shear strength capacity. Experimental results are compared to past shear and flexural studies.

  18. Timber management opportunities in Pennsylvania

    Science.gov (United States)

    Henry H. Webster

    1960-01-01

    The Pennsylvania Department of Forests and Waters serves the people in managing state forest lands and in helping private owners manage their forest lands. To produce more timber from Pennsylvania forests, the Department applies many different forestry practices. But the more effort it spends in one direction, the less it can spend in others. So the Department must...

  19. Timber resource statistics for Oregon.

    Science.gov (United States)

    Sally Campbell; Paul Dunham; David. Azuma

    2004-01-01

    This report is a summary of timber resource statistics for all ownerships in Oregon. Data were collected as part of several statewide multiresource inventories, including those conducted by the Pacific Northwest Region (Region 6) on National Forest System lands in Oregon, by the Bureau of Land Management (BLM) on BLM lands in western Oregon, and by the Pacific...

  20. Understanding Loss Deductions for Timber

    Science.gov (United States)

    John Greene; Michael Jacobson

    1998-01-01

    Forestland owners whose timber has been destroyed may be eligible to take a deduction for the loss on their federal income tax. The loss must be physical in nature and caused by an identifiable event or combination of events that has run its course. There are two types of losses from natural events. Casualty losses are sudden, unexpected, and unusual - as from a fire...

  1. Root architecture and wind-firmness of mature Pinus pinaster.

    Science.gov (United States)

    Danjon, Frédéric; Fourcaud, Thierry; Bert, Didier

    2005-11-01

    This study aims to link three-dimensional coarse root architecture to tree stability in mature timber trees with an average of 1-m rooting depth. Undamaged and uprooted trees were sampled in a stand damaged by a storm. Root architecture was measured by three-dimensional (3-D) digitizing. The distribution of root volume by root type and in wind-oriented sectors was analysed. Mature Pinus pinaster root systems were organized in a rigid 'cage' composed of a taproot, the zone of rapid taper of horizontal surface roots and numerous sinkers and deep roots, imprisoning a large mass of soil and guyed by long horizontal surface roots. Key compartments for stability exhibited strong selective leeward or windward reinforcement. Uprooted trees showed a lower cage volume, a larger proportion of oblique and intermediate depth horizontal roots and less wind-oriented root reinforcement. Pinus pinaster stability on moderately deep soils is optimized through a typical rooting pattern and a considerable structural adaptation to the prevailing wind and soil profile.

  2. Endogenous cytokinin and auxin profiles during in vitro organogenesis from vegetative buds of Pinus radiata adult trees

    Czech Academy of Sciences Publication Activity Database

    Montalban, I.A.; Novák, Ondřej; Rolčík, Jakub; Strnad, Miroslav; Moncalean, P.

    2013-01-01

    Roč. 148, č. 2 (2013), s. 214-231 ISSN 0031-9317 Institutional research plan: CEZ:AV0Z50380511 Keywords : ACTINIDIA-DELICIOSA * SHOOT ORGANOGENESIS * AROMATIC CYTOKININS Subject RIV: EF - Botanics Impact factor: 3.262, year: 2013

  3. Timber value—a matter of choice: a study of how end use assumptions affect timber values.

    Science.gov (United States)

    John H. Beuter

    1971-01-01

    The relationship between estimated timber values and actual timber prices is discussed. Timber values are related to how, where, and when the timber is used. An analysis demonstrates the relative values of a typical Douglas-fir stand under assumptions about timber use.

  4. System Reliability of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2010-01-01

    elements, alternate load path(s) etc. in the structural design. In general these characteristics can have a positive influence on system reliability of a structure however, in Eurocodes ductility is only awarded for concrete and steel structures but not for timber structures. It is well......-know that structural systems can redistribute internal forces due to ductility of a connection, i.e. some additional loads can be carried by the structure. The same effect is also possible for reinforced concrete structures and structures of steel. However, for timber structures codes do not award that ductility......For reduction of the risk of collapse in the event of loss of structural element(s), a structural engineer may take necessary steps to design a collapse-resistant structure that is insensitive to accidental circumstances e.g. by incorporating characteristics like redundancy, ties, ductility, key...

  5. Robustness Analyses of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Hald, Frederik

    2013-01-01

    The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many mo...... with respect to robustness of timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......The robustness of structural systems has obtained a renewed interest arising from a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures, many...... modern building codes consider the need for the robustness of structures and provide strategies and methods to obtain robustness. Therefore, a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues...

  6. Implementing CITES regulations for timber.

    Science.gov (United States)

    Blundell, Arthur G

    2007-03-01

    Foresters are currently confronted with a new challenge. For the first time a commonly traded timber species has been listed on the Convention on International Trade in Endangered Species of Wild Fauna and Flora (CITES). At the 12th Conference of the Parties in November 2002, countries voted 68 to 30 to place the premier timber species of Latin America, big-leaf mahogany (Swietenia macrophylla King [Meliaceae]), on CITES Appendix II. Under Appendix II regulations, trade in mahogany requires that exporting countries verify that each shipment was legally obtained and that its harvest was non-detrimental to the survival of the species. Unfortunately, implementation has been weak, in part because countries have yet to develop a common, pragmatic, cost-effective system to make the legal and non-detriment findings. This paper recommends what such a system might include.

  7. Forests, timber and rural livelihoods

    DEFF Research Database (Denmark)

    Hansen, Christian Pilegaard; Pouliot, Mariève; Marfo, Emmanuel

    2015-01-01

    Based on detailed income data of 478 rural households, the nexus between forest, trees and rural livelihoods in Ghana is investigated and applied to assess implications of the Voluntary Partnership Agreement (VPA) between the EU and Ghana on illegal logging. It is found that, after crops...... and benefits to trees on farm and fallow land to those occupying and cultivating the land. Such efforts would provide incentive for timber production and thus enhance rural livelihoods, while combatting illegal logging, deforestation and forest degradation....

  8. Serrated leaf mutant in mungbean (Vigna radiata (L) Wilczek)

    International Nuclear Information System (INIS)

    Malik, I.A.; Ghulam, Sarwar; Yousaf, Ali; Saleem, M.

    1988-01-01

    Dry dormant seeds of mungbean (Vigna radiata (L) Wilczek) were treated with gamma rays (15, 30 and 60 kR). The serrated leaf mutation was noticed in M 2 of cultivar Pak 32 treated with 60 kR. Cf 14 plants, 3 showed the altered leaf structure and the others were normal. The feature of this mutant was the deep serration of leaflet margins. The mutant had large thick leaflets with prominent venation. The mutant bred true in the M 3 and successive generation. Details of the morphological characteristics of the mutant are presented. The mutant exhibited slower growth particularly during the early stages of development, flowered later and attained shorter height. There was an increase in the number of pods, in seed weight and in seed protein content, but number of seed per pod was considerably reduced. The seed coat colour showed a change from green to yellowish green. In the mutant's flowers the stamina were placed much below the stigma level and the stigma sometimes protruded the corolla. Outcrossing of 4% recorded in some of the mutant lines revealed a reduced cleistogamy. The low number of seeds per pod in the mutant could be due to reduced pollen fertility. The mutant behaved as monogenic recessive. The symbols SL/sl are proposed for this allelic pair. The mutant may have use as a green manure crop because of its large foliage and for the breeders as a genetic marker

  9. Some physicochemical characteristics of pinus (Pinus halepensis Mill., Pinus pinea L., Pinus pinaster and Pinus canariensis) seeds from North Algeria, their lipid profiles and volatile contents.

    Science.gov (United States)

    Kadri, Nabil; Khettal, Bachra; Aid, Yasmine; Kherfellah, Souraya; Sobhi, Widad; Barragan-Montero, Veronique

    2015-12-01

    Physicochemical characteristics of seeds of some pinus species (Pinus halepensis Mill., Pinus pinea L., Pinus pinaster and Pinus canariensis) grown in North Algeria were determined. The results showed that the seeds consist of 19.8-36.7% oil, 14.25-26.62% protein, 7.8-8.6% moisture. Phosphorus, potassium and magnesium were the predominant elements present in seeds. Pinus seed's oil physicochemical properties show acid values (4.9-68.9), iodine values (93.3-160.4) and saponification values (65.9-117.9). Oil analysis showed that the major unsaturated fatty acids for the four species were linoleic acid (30-59%) and oleic acid (17.4-34.6%), while the main saturated fatty acid was palmitic acid (5-29%). Gas Chromatography and Mass Spectrometry analysis of P. halepensis Mill., P. pinaster and P. canariensis volatile oils indicated that the major volatile compound was the limonene with relative percentage of 3.1, 7.5 and 10.8, respectively. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. A review of Sphaeropsis sapinea occurrence on Pinus species in Bulgaria

    Directory of Open Access Journals (Sweden)

    Margarita Georgieva

    2016-12-01

    Full Text Available Sphaeropsis sapinea (Fr. Dyko & Sutton causes shoot blight and canker disease throughout the world on conifers predisposed by stress. The disease is most important to Pinus species that are affected from the seedling stage in nurseries to mature trees in ornamental planting, forest plantations and natural stands. In Bulgaria, the first findings of the disease were noted in 1989 on Pinus nigra plantations in the North-eastern part of the country. Over the past few years, new emergency and severe damages have developed rapidly as a consequence of the prolonged drought periods during the last growing seasons. The high existence of S. sapinea outbreaks contributed considerably to the physiological weakness of pine trees that become more susceptible to attack by aggressive xylophages and other fungal pathogens. Disease occurrence and its pathogenicity are economically important affecting a number of pine trees from all ages. In Bulgaria, S. sapinea has been obtained on six pine species P. nigra, P. strobus, P. radiata, P. ponderosa, P. pinaster and P. halepensis. The aim of this review is to present the available knowledge on distribution, host specificity, biology, ecology, management of the disease, and to discuss its current prevalence and pathogenicity effect on pine species in Bulgaria.

  11. PpRT1: the first complete gypsy-like retrotransposon isolated in Pinus pinaster.

    Science.gov (United States)

    Rocheta, Margarida; Cordeiro, Jorge; Oliveira, M; Miguel, Célia

    2007-02-01

    We have isolated and characterized a complete retrotransposon sequence, named PpRT1, from the genome of Pinus pinaster. PpRT1 is 5,966 bp long and is closely related to IFG7 gypsy retrotransposon from Pinus radiata. The long terminal repeats (LTRs) have 333 bp each and show a 5.4% sequence divergence between them. In addition to the characteristic polypurine tract (PPT) and the primer binding site (PBS), PpRT1 carries internal regions with homology to retroviral genes gag and pol. The pol region contains sequence motifs related to the enzymes protease, reverse transcriptase, RNAseH and integrase in the same typical order known for Ty3/gypsy-like retrotransposons. PpRT1 was extended from an EST database sequence indicating that its transcription is occurring in pine tissues. Southern blot analyses indicate however, that PpRT1 is present in a unique or a low number of copies in the P. pinaster genome. The differences in nucleotide sequence found between PpRT1 and IFG7 may explain the strikingly different copy number in the two pine species genome. Based on the homologies observed when comparing LTR region among different gypsy elements we propose that the highly conserved LTR regions may be useful to amplify other retrotransposon sequences of the same or close retrotransposon family.

  12. Selection of Nepalese Timber for Small Wind Turbine Blade Construction

    DEFF Research Database (Denmark)

    Sinha, R.; Acharya, Parash; Freere, Peter

    2010-01-01

    , weathering effect on coatings, price, growth and availability of the timber. Mechanical properties such as Young's modulus of elasticity, breaking strength, breaking strain and Brinell's hardness of selected Nepalese timbers are presented. The effects of weathering on timbers without coating...

  13. Timber products output and timber harvests in Alaska: projections for 1992-2010.

    Science.gov (United States)

    D.J. Brooks; R.W. Haynes

    1994-01-01

    Projections of Alaska timber products output, the derived demand for raw material, and timber harvest by owner are developed from a trend-based analysis. By using a spread-sheet model, material flows in the Alaska forest sectorare fully accounted for. Demand for Alaska national forest timber is projected and depends on product output and harvest by other owners. Key...

  14. The Timber Resource Inventory Model (TRIM): a projection model for timber supply and policy analysis.

    Science.gov (United States)

    P.L. Tedder; R.N. La Mont; J.C. Kincaid

    1987-01-01

    TRIM (Timber Resource Inventory Model) is a yield table projection system developed for timber supply projections and policy analysis. TRIM simulates timber growth, inventories, management and area changes, and removals over the projection period. Programs in the TRIM system, card-by-card descriptions of required inputs, table formats, and sample results are presented...

  15. Vigna radiata as a New Source for Biotransformation of Hydroquinone to Arbutin

    Directory of Open Access Journals (Sweden)

    Zahra Tofighi, Mohsen Amini, Mahzad Shirzadi, Hamideh Mirhabibi, Negar Ghazi Saeedi, Narguess Yassa

    2016-06-01

    Full Text Available Background: The suspension culture of Vigna radiata was selected for biotransformation of hydroquinone to its β-D-glucoside form (arbutin as an important therapeutic and cosmetic compound. Methods: The biotransformation efficiency of a Vigna radiata cell culture in addition to different concentrations of hydroquinone (6-20 mg/100 ml was investigated after 24 hours in comparison to an Echinacea purpurea cell culture and attempts were made to increase the efficacy of the process by adding elicitors. Results: Arbutin was accumulated in cells and found in the media only in insignificant amounts. The arbutin content of the biomass extracts of V. radiata and E. purpurea was different, ranging from 0.78 to 1.89% and 2.00 to 3.55% of dry weight, respectively. V. radiata demonstrated a bioconversion efficiency of 55.82% after adding 8 mg/100 ml precursor, which was comparable with result of 69.53% for E. purpurea cells after adding 10 mg/100 ml hydroquinone (P>0.05. In both cultures, adding hydroquinone in two portions with a 24-hour interval increased the biotransformation efficiency. Different concentrations of methyl jasmonate (25, 50, and 100 µM and chitosan (50 and 100 µg/ml as elicitors increased the bio-efficiency percentage of the V. radiata culture in comparison with the flask containing only hydroquinone. Conclusion: This is the first report of the biotransformation possibility of V. radiata cultures. It was observed the bioconversion capacity increased by adding hydroquinone in two portions, which was comparable to adding an elicitor.

  16. Operability and location of Wisconsin's timber resource.

    Science.gov (United States)

    Jerold T. Hahn; Mark H. Hansen

    1989-01-01

    Data collected during the 1983 Wisconsin Statewide forest inventory were used to examine operability of the timber resource based on seven operability components. Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site.

  17. Timber resource of Missouri's Prairie, 1972.

    Science.gov (United States)

    Jerold T. Hahn; Alexander Vasilevsky

    1975-01-01

    The third timber inventory of Missouri's Prairie Forest Survey Unit shows substantial declines in both growing-stock and sawtimber volumes between 1959 and 1972. Commercial forest area declined by one-fifth. Presents highlights and statistics on forest area and timber volume, growth, mortality, ownership, and use in 1972.

  18. Operability and location of Michigan's timber resource.

    Science.gov (United States)

    Mark H. Hansen; Jerold T. Hahn

    1987-01-01

    Operability is the ease or difficulty of managing or harvesting timber because of physical conditions in the stand or on the site. Data collected during the 1980 Michigan statewide forest inventory were used to examine operability of the timber resource based on seven operability components.

  19. Timber price dynamics following a natural catastrophe

    Science.gov (United States)

    Jeffrey P. Prestemon; Thomas P. Holmes

    2000-01-01

    Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20 percent of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the...

  20. Tall timber building technologies in The Netherlands

    NARCIS (Netherlands)

    Jorissen, A.J.M.; Leijten, A.J.M.

    2008-01-01

    In the last few decades, structural timber for residential buildings has lost popularity because of problems related to floor vibrations, acoustics and fire resistance. In recent years, however, solutions to these problems have been developed and timber-framed housing is becoming increasingly

  1. Timber-concrete composite floor systems

    NARCIS (Netherlands)

    Linden, M.L.R. van der; Blass, H.J.

    1996-01-01

    Timber-concrete composite (tcc) beams may be used for the renovation of old timber floors. Although these systems are a simple and practical solution, they are not widely adopted. One of the reasons for this is the lack of uniform design mies. In this research programme shear tests on four different

  2. Optimal control of raw timber production processes

    Science.gov (United States)

    Ivan Kolenka

    1978-01-01

    This paper demonstrates the possibility of optimal planning and control of timber harvesting activ-ities with mathematical optimization models. The separate phases of timber harvesting are represented by coordinated models which can be used to select the optimal decision for the execution of any given phase. The models form a system whose components are connected and...

  3. Timber resource statistics for western Washington.

    Science.gov (United States)

    Coffin D. MacLean; Patricia M. Bassett; Glenn. Yeary

    1992-01-01

    This report summarizes a 1988-90 timber resource inventory of 19 counties in western Washington: Clallam, Clark, Cowlitz, Grays Harbor, Island, Jefferson, King, Kitsap, Lewis, Mason, Pacific, Pierce, San Juan, Skagit, Skamania, Snohomish, Thurston, Wahkiakum, and Whatcom. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  4. Primer Registro de Tamarixia radiata (Waterston, 1922 (Hymenoptera: Eulophidae en Colombia Record of Tamarixia radiata (Waterston, 1922 (Hymenoptera: Eulophidae in Colombia

    Directory of Open Access Journals (Sweden)

    Everth Emilio Ebratt Ravelo

    2011-12-01

    Full Text Available Tamarixia radiata es un ectoparasitoide idiobionte de Diaphorina citri Kuwayama (Hemiptera: Psyllidae; la especie fue descrita a partir de material recogido en la India. Ha sido introducida en muchas regiones intencional o accidentalmente para el control biológico de D. citri, incluyendo algunos países asiáticos. Se sabe de su presencia en el sur de África y las Américas. En Suramérica, se reportó en Brasil, Argentina y ahora en Colombia.Tamarixia radiata is an ectoparasitoid idiobionte of Diaphorina citri Kuwayama (Hemiptera: Psyllidae; the species was described from material collected in India. It has been introduced in many regions intentionally or accidentally, to biological control of D. citri, including some Asian countries. It is know about its presence in southern Africa and the Americas. In South America, it is present in Brazil, Argentina and now in Colombia.

  5. Aesthetic Qualities of Cross Laminated Timber

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard

    to its sustainable profile. In parallel to this, new production methods and further refined timber products have been developed. Among these are the engineered timber-based product Cross Laminated Timber (CLT) that show enhanced structural properties compared to unrefined timber. However, the question...... an undefined aesthetic potential that may innovate how we construct and perceive timber architecture, the overall aim of the thesis is to inquire into the architectural and aesthetic qualities of CLT. Through three chapters this thesis examines and discusses 1) the architectural qualities of CLT, 2......) the materiality of CLT, and 3) how one can deal with these qualitative aspects in the design process. This leads to: firstly, the development of an explicit model to help structuring the analysis and evaluation of the materiality of CLT, and secondly, a clarification and articulation of the aesthetic qualities...

  6. Nailed timber beams with I composed section

    Directory of Open Access Journals (Sweden)

    Jorge Luís Nunes de Góes

    2003-01-01

    Full Text Available The employment of built-up timber beams, made of commercial dimensions pieces, is becoming increasingly important in timber structures in Brazil, mainly due to the ever-growing scarcity of timber elements in larger sizes. The built-up system has vast application, from beams for residential buildings to girders for small bridges. The objective of this work is the theoretical and experimental study of nailed timber beams with composed cross section I. The design procedure of EUROCODE 5/93 and NBR 7190/97 are shown and evaluated, as well as the theory about the subject matter. The experimental evaluation of the theoretical models was made by means of bending tests in prototypes of built-up timber beams. The obtained results shows that the EUROCODE 5/93 procedure is the most indicated for evaluating effective bending stiffness, normal and shear stresses as well as the load on fasteners.

  7. Reliability Analysis of Structural Timber Systems

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    2000-01-01

    Structural systems like timber trussed rafters and roof elements made of timber can be expected to have some degree of redundancy and nonlinear/plastic behaviour when the loading consists of for example snow or imposed load. In this paper this system effect is modelled and the statistic...... of variation. In the paper a stochastic model is described for the strength of a single piece of timber taking into account the stochastic variation of the strength and stiffness with length. Also stochastic models for different types of loads are formulated. First, simple representative systems with different...... types of redundancy and non-linearity are considered. The statistical characteristics of the load bearing capacity are determined by reliability analysis. Next, more complex systems are considered modelling the mechanical behaviour of timber roof elements I stressed skin panels made of timber. Using...

  8. Tree-mendous Timber Evaluation

    Science.gov (United States)

    2004-01-01

    Funded and administered by NASA, the Affiliated Research Center (ARC) program transfers geospatial technologies from the Space Agency and participating universities to commercial companies, non-profit and trade organizations, and tribal governments. The origins of the ARC program date back to 1988, when NASA's Stennis Space Center initiated the Visiting Investigator Program to bring industry closer to spatial information technologies. The success of this trial program led to an expansion into the ARC program, whose goal is to enhance competitiveness of U.S. industries through more efficient use of remote sensing and related technologies. NASA's ARC program served as the foundation for the development of International Hardwood Resources, which then grew into Falcon Informatics with the acquisition of a technology from a European software company and a change of business models. Doylestown, Pennsylvania-based Falcon Informatics is now a world-leading information services company that combines in-depth timber industry experience with state-of-the-art software to serve the needs of national governments, international paper companies, and timber-investment management organizations.

  9. Population structure and historical demography of the thorny skate (Amblyraja radiata, Rajidae) in the North Atlantic

    NARCIS (Netherlands)

    Chevolot, M.; Wolfs, P.H.J.; Palsson, J.; Rijnsdorp, A.D.; Stam, W.T.; Olsen, J.L.

    2007-01-01

    Population genetic structure of the thorny skate (Amblyraja radiata) was surveyed in >300 individuals sampled from Newfoundland, Iceland, Norway, the Kattegat and the central North Sea. A 290-bp fragment of the mt cytochrome-b gene was first screened by SSCP. Sequences of SSCP haplotypes revealed

  10. Population structure and historical demography of the thorny skate (Amblyraja radiata, Rajidae) in the North Atlantic

    NARCIS (Netherlands)

    Chevolot, Malia; Wolfs, Peter H. J.; Palsson, Jonbjorn; Rijnsdorp, Adriaan D.; Stam, Wytze T.; Olsen, Jeanine L.; Palson, J.

    Population genetic structure of the thorny skate (Amblyraja radiata) was surveyed in > 300 individuals sampled from Newfoundland, Iceland, Norway, the Kattegat and the central North Sea. A 290-bp fragment of the mt cytochrome-b gene was first screened by SSCP. Sequences of SSCP haplotypes revealed

  11. Potential biochemical markers for selection of disease resistance in Vigna radiata

    International Nuclear Information System (INIS)

    Badere, R.S.; Koche, D.K.; Choudhary, A.D.; Pawar, S.E.

    2001-01-01

    The Vigna radiata (L.) Wilczek (Green gram), a major pulse crop is prone to damaging diseases caused by Erysiphe polygoni, Cercospora canescens and Rhizoctonia sp. Therefore, the development of multiple resistance is a major breeding objective in green gram. Resistance to powdery mildew has already been developed, however, there are no reports on the development of resistance to Cercospora in green gram. Owing to limitation of conventional screening methods, the improvement for multiple disease resistance is inadequate, in this crop. It needs an efficient and quick selection method, for screening the plant population at an early stage. It is well established that the resistant interaction, in plants, involves accumulation of antibiotic compound phytoalexin (Genestein in Vigna radiata) and induction of enzymes such as β-1,3 gulcanase and Chitinases. These compounds are not only induced by pathogens but also pathogen-derived elicitors. These biochemical compounds can be used as resistance indicative biochemical markers for screening the natural or mutagen induced genetic diversity in populations of Vigna radiata in non-destructive manner. It, however, needs a systematic study of plant defense response. This paper deals with the response of resistant and susceptible cultivars of vigna radiata to Cercospora elicitor and development of non-destructive selection method for disease resistance. (author)

  12. 36 CFR 223.32 - Timber sale operating plan.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber sale operating plan... SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Timber Sale Contracts Contract Conditions and Provisions § 223.32 Timber sale operating plan. Sale contracts with a term of 2 years or more shall provide...

  13. Inventory analysis of the timber industry in Ghana

    NARCIS (Netherlands)

    Eshun, J.F.; Potting, J.; Leemans, R.

    2010-01-01

    Background, aim, and scope The timber sector, i.e., forestry and timber industry, plays an important role in the socioeconomic development of Ghana through timber products export. Timber production in this sector is associated with increasing environmental burdens in terms of use of materials and

  14. Structural Reliability of the Nigerian Grown Abura Timber Bridge ...

    African Journals Online (AJOL)

    Structural reliability analysis was carried out on the Nigerian grown Abura timber, to ascertain its structural performance as timber bridge beams. Samples of the Nigerian grown Abura timber were bought from timber market, seasoned naturally and their structural/strength properties were determined at a moisture content of ...

  15. CONTEMPORARY SLOVENIAN TIMBER ARCHITECTURE INTERNATIONAL RECOGNIZED

    Directory of Open Access Journals (Sweden)

    Manja Kitek Kuzman

    2014-12-01

    Full Text Available The book presents Slovenia' s contemporary timber architecture. Thanks to its abundant forests, Slovenia has preserved the tradition of wood construction. As much as 60% of its surface is covered by forests. Slovenia is also the third most forested country in Europe. The high share of forest-covered surface allows for a sustainable production of high-quality wood. In the past, wood was used primarily in the construction of farm buildings, but now timber architecture is used for everything from residences and office buildings to public buildings such as community centres and schools. Timber construction is becoming increasingly popular. Apart from larger companies taking this approach, a great number of wooden houses have sprung up, built either on personal initiative or with the support of carpenter workshops. Slovenian timber architecture has taken a new approach to environmental and energy-efficiency problems and received great international recognition. The book discusses over fifty projects built over a ten-year period, and includes descriptions, photographs, and plans. The projects include residential areas, administration, and office, as well as tourist, educational, and industrial buildings. Timber architecture is presented as an integral part of the Slovenian landscape. The monograph will be useful to designers and future experts in their planning of optimal timber buildings and will highlight the main benefits of using timber construction.

  16. Discovering and verifying DNA polymorphisms in a mung bean [V. radiata (L. R. Wilczek] collection by EcoTILLING and sequencing

    Directory of Open Access Journals (Sweden)

    Dean Rob E

    2008-06-01

    Full Text Available Abstract Background Vigna radiata, which is classified in the family Fabaceae, is an important economic crop and a dietary staple in many developing countries. The species radiata can be further subdivided into varieties of which the variety sublobata is currently acknowledged as the putative progenitor of radiata. EcoTILLING was employed to identify single nucleotide polymorphisms (SNPs and small insertions/deletions (INDELS in a collection of Vigna radiata accessions. Findings A total of 157 DNA polymorphisms in the collection were produced from ten primer sets when using V. radiata var. sublobata as the reference. The majority of polymorphisms detected were found in putative introns. The banding patterns varied from simple to complex as the number of DNA polymorphisms between two pooled samples increased. Numerous SNPs and INDELS ranging from 4–24 and 1–6, respectively, were detected in all fragments when pooling V. radiata var. sublobata with V. radiata var. radiata. On the other hand, when accessions of V. radiata var. radiata were mixed together and digested with CEL I relatively few SNPs and no INDELS were detected. Conclusion EcoTILLING was utilized to identify polymorphisms in a collection of mung bean, which previously showed limited molecular genetic diversity and limited morphological diversity in the flowers and pod descriptors. Overall, EcoTILLING proved to be a powerful genetic analysis tool providing the rapid identification of naturally occurring variation.

  17. Timber Price Dynamics Following a Natural Catastrophe

    OpenAIRE

    Jeffrey P. Prestemon; Thomas P. Holmes

    2000-01-01

    Catastrophic shocks to existing stocks of a renewable resource can cause long-run price shifts. With timber, these long-run price shifts may be accompanied by a short-run price drop due to salvage. Hurricane Hugo damaged 20% of southern pine timber in the South Carolina Coastal Plain in 1989. To estimate the short- and long-run effects of the hurricane on the prices of timber stocks, we estimated an intervention model of the residuals of cointegration of South Carolina sawtimber and pulpwood ...

  18. The Materiality of Novel Timber Architecture

    DEFF Research Database (Denmark)

    Bejder, Anne Kirkegaard; Kirkegaard, Poul Henning; Wraber, Ida Kristina

    2016-01-01

    In recent years, wood as a building material has gained renewed focus and, in parallel, new production methods and further refined timber products have been developed. Many of these novel timber building materials have gained significantly enhanced technical qualities, and the question is whether...... this is at the expense of wood’s sensuous and poetic qualities. The proposed method to deal with these questions is to develop a discursive model that can clarify aspects essential for analyzing and discussing the materiality of timber in its contemporary engineered forms. Firstly, this paper presents a theoretical...

  19. Laboratory Evaluation of the Anti-stain Efficacy of Crude Wood Vinegar for Pinus densiflora

    Directory of Open Access Journals (Sweden)

    Sabiha Salim

    2016-12-01

    Full Text Available In Korea, Pinus densiflora is one of the most important indigenous tree species in terms of making high-value wood products. Therefore, Korean sawmills exercise extreme caution to prevent fungal discoloration such as that caused by sapstains and molds on the timber. In this study, the effectiveness of using natural crude wood vinegar to inhibit sapstains and molds, especially on Pinus densiflora (Japanese red pine was examined. Pinus densiflora wood samples were dipped in absolute and diluted wood vinegar at different concentrations (1:1, 2:1, and 3:1; deionized water to wood vinegar dilution ratio for 3 minutes and immediately air-dried. In addition, volatile wood vinegar was also used in this study to imitate the condition of wood vinegar when exposed to open air. The degree of discoloration was examined and evaluated every 2, 4, 6, and 8 weeks according to the ASTM D4445-91 Standard Method for laboratory test. Crude wood vinegar inhibited sapstains more efficiently than it inhibited molds. Wood vinegar at a 1:1 concentration was found to be the most optimum treatment for inhibiting sapstains for at least 8 weeks.

  20. Effects Of Drought Stress on Germination in Fourteen Provenances of Pinus Brutia Ten. Seeds in Turkey

    Directory of Open Access Journals (Sweden)

    Hakan Şevik

    2015-02-01

    Full Text Available Pinus brutia Ten., Red pine, known to be tough drought resistant pine specie, could effectively be used for afforestation of disturbed areas. It is of great interest for the afforestation in arid zones. Appropriate seed sources for the specific areas guarantees reforestation success. Away from its native areas Pinus brutia Ten. is planted for its ornamental value and timber production purposes. Selection of drought resistant provenances can very well increase the survival success. In this study, the effects of water potential on germination were studied in fourteen provenances of Pinus brutia Ten. from Turkey. Water potentials between 0 and -8 bars were obtained using polyethylene glycol 6000 (PEG-6000 solutions. Seeds were kept for 35 day at 20 ± 0.5°C. A decrease in water potential produced a marked reduction in germination percentage and germination value. As a result, significant variations between the provenances were found. It was determined that, under a -8 bar water stress, Isparta-Bucak and Mersin-Silifke, respectively corresponding to 58% and 57% of the control group, were the least water stress affected provenances.

  1. Reliability and Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Cizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    In the last few decades there have been intensely research concerning reliability of timber structures. This is primarily because there is an increased focus on society on sustainability and environmental aspects. Modern timber as a building material is also being competitive compared to concrete...... and steel. However, reliability models applied to timber were always related to individual components but not the systems. as any real structure is a complex system, system behaviour must be of a particular interest. In the chapter 1 of this document an overview of stochastic models for strength and loads...... (deterministic, probabilistic and risk based approaches) of the robustness are given. Chapter 3 deals more detailed with the robustness of timber structures....

  2. Statistical Analysis of Data for Timber Strengths

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Hoffmeyer, P.

    Statistical analyses are performed for material strength parameters from approximately 6700 specimens of structural timber. Non-parametric statistical analyses and fits to the following distributions types have been investigated: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...

  3. Pinus saw timber tree optimisation in South Africa: a comparison of ...

    African Journals Online (AJOL)

    Both Cut to Length (CTL) and Full Tree/Tree Length (FT/TL) ground-based systems are used to harvest pine in South Africa. The fully mechanised CTL system is the most recently introduced system in South Africa. One of the reasons for the limited use of CTL harvesting systems in South Africa is the perceived inability of the ...

  4. Comparison of satellite imagery from LISS-III/Resourcesat-1 and TM/Landsat 5 to estimate stand-level timber volume

    Directory of Open Access Journals (Sweden)

    Elias Fernando Berra

    2017-01-01

    Full Text Available After Landsat 5 activities were discontinued, sensors on board ResourceSat-1 satellite have been pointed as an option for Landsat series. The aim of this study is to estimate timber volume from a slash pine (Pinus elliottii Engelm. stand using images from both LISS-III/ResourceSat-1 and TM/Landsat 5 sensors, cross comparing their performances. Reflectance values from the four spectral bands considered equivalent for both sensors were compared regarding sensitivity to changes in timber volume. Trends were similar, with direct relationship in the near-infrared bands and inverse relationships in the visible and mid-infrared bands. Significant differences were only found in the equivalent band of green. Multiple linear regressions were used to select spectral bands that would better explain variations in timber volume. The best fit equations for each sensor were inverted to generate maps of timber volume, estimates which were compared at pixel and stand level. None of the scales showed significant differences between estimates generated from the two sensors. We concluded that LISS-III and TM have generally very similar performance for monitoring timber volume, and LISS-III could therefore be potentially used as a complement or substitute to Landsat series.

  5. The Transcriptomic Responses of Pinus massoniana to Drought Stress

    Directory of Open Access Journals (Sweden)

    Mingfeng Du

    2018-06-01

    Full Text Available Masson pine (Pinus massoniana is a major fast-growing timber species planted in southern China, a region of seasonal drought. Using a drought-tolerance genotype of Masson pine, we conducted large-scale transcriptome sequencing using Illumina technology. This work aimed to evaluate the transcriptomic responses of Masson pine to different levels of drought stress. First, 3397, 1695 and 1550 unigenes with differential expression were identified by comparing plants subjected to light, moderate or severe drought with control plants. Second, several gene ontology (GO categories (oxidation-reduction and metabolism and Kyoto Encyclopedia of Genes and Genomes (KEGG pathways (plant hormone signal transduction and metabolic pathways were enriched, indicating that the expression levels of some genes in these enriched GO terms and pathways were altered under drought stress. Third, several transcription factors (TFs associated with circadian rhythms (HY5 and LHY, signal transduction (ERF, and defense responses (WRKY were identified, and these TFs may play key roles in adapting to drought stress. Drought also caused significant changes in the expression of certain functional genes linked to osmotic adjustment (P5CS, abscisic acid (ABA responses (NCED, PYL, PP2C and SnRK, and reactive oxygen species (ROS scavenging (GPX, GST and GSR. These transcriptomic results provide insight into the molecular mechanisms of drought stress adaptation in Masson pine.

  6. Profitability of timber harvesting and timber transportation enterprises

    International Nuclear Information System (INIS)

    Rajamaeki, J.

    1996-01-01

    In co-operation with the major companies contracting out forestry work and Statistics Finland, Metsaeteho carried out a project with the objective of analysing the economic profitability of timber harvesting and transportation enterprises in 1994. The calculation of profitability was based on utilisation of last livelihoods taxation data (EVR) that Statistics Finland was in possession of. The basic material comprised data that the companies contracting out forestry work had full-time entrepreneurs. There were 255 forestry machine contractor enterprises and 270 trucking enterprises. Statistics Finland was responsible for computations of the results of the project. The calculation of the indicators of profitability was based on the recommendations of Yritystutkimusneuvottelukunta, a committee looking into the functioning of enterprises. The year 1994 was a good year from the viewpoint of profitability of both forestry machine contractors as well as trucking enterprises. With full depreciations and salary adjustments attended to, both enterprise groups still showed a mean profitability of ca. 8 %. The yield of invested capital was ca. 25 %. The differences in profitability among enterprises were great in both groups and in different parts of the country

  7. Alabama's timber industry - an assessment of timber product output and use, 1995

    Science.gov (United States)

    Tony G. Johnson; Jim R. Gober; J. Stephen Nix

    1998-01-01

    Output of Industrial Timber Products.Note: The reader must understand that certain terms, namely-retained, export, import, production, and receipts-have specialized meanings and relationships. unique to the Forest Inventory and Analysis Units across the country that deal with timber products output.In 1995, the combined...

  8. Diaphorina citri (Kuwayama, 1907 and Tamarixia radiata (Waterson, 1922 in citrus crops of Cundinamarca, Colombia

    Directory of Open Access Journals (Sweden)

    Ebratt Ravelo Everth Emilio

    2011-12-01

    Full Text Available

    The presence of Diaphorina citri Kuwayama (Hemiptera: Psyllidae and Tamarixia radiata (Waterston (Hymenoptera: Eulophidae was recorded in citrus crops of Cundinamarca, Colombia. This work is to know the geographic distribution of D. citri and an initial record of the parasitoid T. radiata in citrus producing areas of this department.

  9. Bioecology of the fungus Sphaeropsis sapinea dyko & Sutton - agents of pinus species decline

    Directory of Open Access Journals (Sweden)

    Milijašević Tanja

    2002-01-01

    Full Text Available Sphaeropsis sapinea is a cosmopolitan fungus, identified in more than 50 countries of the world, on all continents, but it is primarily the species of warm lands. It is also a polyphagous fungus recorded from 11 coniferous genera. The most endangered and the most frequent host plants are Pinus species - it occurs on 48 pine species, among which the most susceptible are Pinus Radiata, P. nigra, P. sylvestris, P. ponderosa, P. resinosa, P. mugo, P. pinaster and P. elliotti. The greatest damage is caused on the introduced Pinus species and on those cultivated in artificial plantations, shelterbelts and in urban environments. In Yugoslavia S. sapinea is widely distributed both in the continental and in the Mediterranean parts. It was identified from ten pine species and six hosts from other coniferous genera. By the study in our country, the new hosts of this fungus were detected - Pinus jeffrey, P. peuce and P. heldreichii. The most endangered species in our country is Austrian pine, both in urban environments, and in plantations The symptoms of the disease are bud wilt, curling, stunting and necrosis of current year shoots and needles, dieback of top shoots, parts of crown or tree tops, branch and stem bark canker, root collar rot on the young plants in nurseries and their dying. This fungus also prevents seed germination of Pinus species and causes blue sap stain of the freshly cut wood, although sap stain was also observed on standing trees. More rarely it causes root rot and crown wilt of Pinus species. The main symptoms of infection, both of young plants and older trees, are the dieback of current year shoots S. sapinea can penetrate through buds, bark of young shoots and needles. The critical time of infection is the period from mid April to mid May. Then infection mainly penetrates through the bark of young shoots, which results in their dying. Infection through the needles occurs mainly at the time of their sudden growth or during summer

  10. Thermal hygrometric requirements for the rearing and release of Tamarixia radiata (Waterston (Hymenoptera, Eulophidae

    Directory of Open Access Journals (Sweden)

    Mariuxi Lorena Gómez-Torres

    2014-09-01

    Full Text Available Thermal hygrometric requirements for the rearing and release of Tamarixia radiata (Waterston (Hymenoptera, Eulophidae. Tamarixia radiata is the main agent for the biological control of Diaphorina citri in Brazil with a parasitism rate ranging from 20 to 80%. This study investigated the influence of temperature on the development, fecundity and longevity of adults of T. radiata and the effect of relative humidity (RH on their parasitism capacity and survival rate in the pre-imaginal period. The effect of temperature was assessed in the range between 15 and 35 ± 1ºC, 70 ± 10% RH, and a 14-h photophase. The RH effect was evaluated in the range from 30 to 90 ± 10%, temperature at 25 ± 1ºC, and photophase of 14-h. At 25ºC, circa 166.7 nymphs were parasitized, the highest parasitism capacity observed compared to other treatments. The longest longevity of females was observed at 25ºC, although the rate did not differ in the 20-30ºC temperature range. The threshold temperature (TT was 7.2ºC, and 188.7 degrees-day were required for the development (egg-to-adult period. The parasitism rate and longevity were higher at 50 and 70% of RH. This shows that temperature and RH may affect the parasitism capacity of T. radiata on nymphs of D. citri, which can explain the great parasitism variation for D. citri observed in citrus groves in São Paulo State, Brazil.

  11. Ethanol production from Lycoris radiata Herbert (Amarylllidaceae) residues as a new resource

    International Nuclear Information System (INIS)

    Liu, Shuangping; Ding, Zhongyang; Zhang, Liang; Gu, Zhenghua; Wang, Xiaolan; Sun, Xiaojun; Shi, Guiyang

    2012-01-01

    The large quantities of Lycoris radiata Herbert (Amarylllidaceae) residues, left after the extraction of alkaloids from the bulbs, could threaten the environment if not properly disposed. Therefore, the aim of this research is to investigate the feasibility of bioconversion of L. radiata Herbert residues to ethanol through batch fermentation. In L. radiata Herbert residues, the average contents (g kg −1 ) of non-structural carbohydrates, crude fiber, crude protein, ash, and lignin are 485.1, 177.3, 124.7, 108.9, and 91.0, respectively. Five commercial enzymes (β-glucanase, pectinase, xylanase, phytase and cellulase) were employed in pretreatment process and ethanol bioconversion was evaluated with three yeasts (Saccharomyces cerevisiae, osmotolerant S. cerevisiae and genetically engineered S. cerevisiae constructed to use cellobiose). The results showed that pretreament by β-glucanase successfully facilitated the penetration of α-amylase into ground material. After residues pretreatment by 10 g kg −1 of β-glucanase for 14 h at 50 °C, the viscosity decreased from 1135 to 59 Pa·s which was equivalent to that obtained by the combined whole five enzymes. Further experiments proved that osmotolerant S. cerevisiae was desirable for ethanol production from Lycoris radiate Herbert residues. The results are helpful to develop non-grain bioethanol production. -- Highlights: ► The residuals from Lycoris radiata Herbert bulbs were able to generate 55% ethanol concentrations by yeast fermentation. ► Treatment with xylanase significantly reduced the viscosity more than 10-fold and improved fermentable sugars by ∼35%. ► An osmotolerant Saccharomyces cerevisiae strain that showed improved fermentation rates was identified.

  12. Clinicoradiological study on 59 patients with pure motor hemiparesis due to corona radiata infarcts

    International Nuclear Information System (INIS)

    Nagaoka, Tetsuro; Kawabe, Kiyokazu; Ito, Hirono; Ikeda, Ken

    2009-01-01

    To evaluate the clinicoradiological findings of patients with small infarction at the level of the corona radiata, such patients were divided into three groups: Group A (facio-lingual weakness), Group B (arm-dominant weakness) and Group C (leg-dominant weakness). The anteroposterior position and maximum diameter of the radiata infarcts were assessed by axial T2-weighted imaging. In total, 59 consecutive patients (42 men and 17 women) were selected. The frequency of radiata infarct is 9.4% among cerebral infarct patients. The male/female ratio was 1.3. The mean age (SD) was 68.9 (9.5) years. The number of patients was 23 in Group A, 19 in Group B and 17 in Group C. Group B patients needed aid in their daily life, when compared to Group A and Group C. The cerebrovascular risk profiles demonstrated hypertension in 43 patients (72.9%), diabetes mellitus in 15 (25.4%), current smoking in 22 (37.3%), dyslipidemia in 16 (27.1%) and arterial fibrillation in 11 (18.6%). The clinical subtypes revealed 48 patients with lacunar infarct and 11 with cardiogenic emboli. The somatotopical distribution of motor fibers of Groups A to C was arranged in antero-posterior order. There were 24 patients with right lesions and 35 with left lesions. The size of the left infarcts was significantly smaller than that of the right infarcts. The clinical outcome of patients with arm-dominant weakness was relatively poor as compared to that of patients with dysarthria or leg-dominant weakness. The neuroradiological data suggest that left radiata infarct is smaller and more frequent than right infarct. (author)

  13. Clinicoradiological study on 59 patients with pure motor hemiparesis due to corona radiata infarcts

    Energy Technology Data Exchange (ETDEWEB)

    Nagaoka, Tetsuro; Kawabe, Kiyokazu; Ito, Hirono; Ikeda, Ken [Toho Univ., Omori Medical Center, Tokyo (Japan)

    2009-07-15

    To evaluate the clinicoradiological findings of patients with small infarction at the level of the corona radiata, such patients were divided into three groups: Group A (facio-lingual weakness), Group B (arm-dominant weakness) and Group C (leg-dominant weakness). The anteroposterior position and maximum diameter of the radiata infarcts were assessed by axial T2-weighted imaging. In total, 59 consecutive patients (42 men and 17 women) were selected. The frequency of radiata infarct is 9.4% among cerebral infarct patients. The male/female ratio was 1.3. The mean age (SD) was 68.9 (9.5) years. The number of patients was 23 in Group A, 19 in Group B and 17 in Group C. Group B patients needed aid in their daily life, when compared to Group A and Group C. The cerebrovascular risk profiles demonstrated hypertension in 43 patients (72.9%), diabetes mellitus in 15 (25.4%), current smoking in 22 (37.3%), dyslipidemia in 16 (27.1%) and arterial fibrillation in 11 (18.6%). The clinical subtypes revealed 48 patients with lacunar infarct and 11 with cardiogenic emboli. The somatotopical distribution of motor fibers of Groups A to C was arranged in antero-posterior order. There were 24 patients with right lesions and 35 with left lesions. The size of the left infarcts was significantly smaller than that of the right infarcts. The clinical outcome of patients with arm-dominant weakness was relatively poor as compared to that of patients with dysarthria or leg-dominant weakness. The neuroradiological data suggest that left radiata infarct is smaller and more frequent than right infarct. (author)

  14. PHYSIOLOGICAL RESPONSES OF ECKLONIA RADIATA (LAMINARIALES) TO A LATITUDINAL GRADIENT IN OCEAN TEMPERATURE

    DEFF Research Database (Denmark)

    Stæhr, Peter Anton; Wernberg, Thomas

    2009-01-01

    We tested the ability of sporophytes of a small kelp, Ecklonia radiata (C. Agardh) J. Agardh, to adjust their photosynthesis, respiration, and cellular processes to increasingly warm ocean climates along a latitudinal gradient in ocean temperature (~4°C). Tissue concentrations of pigment and nutr......We tested the ability of sporophytes of a small kelp, Ecklonia radiata (C. Agardh) J. Agardh, to adjust their photosynthesis, respiration, and cellular processes to increasingly warm ocean climates along a latitudinal gradient in ocean temperature (~4°C). Tissue concentrations of pigment...... and nutrients decreased with increasing ocean temperature. Concurrently, a number of gradual changes in the metabolic balance of E. radiata took place along the latitudinal gradient. Warm-acclimatized kelps had 50% lower photosynthetic rates and 90% lower respiration rates at the optimum temperature than did...... cool-acclimatized kelps. A reduction in temperature sensitivity was also observed as a reduction in Q10-values from cool- to warm-acclimatized kelps for gross photosynthesis (Q10: 3.35 to 1.45) and respiration (Q10: 3.82 to 1.65). Respiration rates were more sensitive to increasing experimental...

  15. Enhancing Growth of Vigna radiata in the Presence of Pseudomonas aeruginosa Biopolymer and Metarhizium anisopliae Spores

    Directory of Open Access Journals (Sweden)

    Bhagwan N. Rekadwad

    2016-01-01

    Full Text Available Exopolysaccharide producing Pseudomonas aeruginosa NCIM 2945 (PANCL belonging to gamma-proteobacterium and entomopathogenic fungus Metarhizium anisopliae MCC 1129 (MAMCC belonging to Ascomycota were studied for their morphological features biochemical characteristics and plant growth promotion ability. Optimum growth of PANCL was recorded after 24 h at temperature 30°C and pH 7.0. Gram-negative PANCL appeared as white in color, one mm size, circular, opaque, and nonconsistent elevated colonies with entire margin. It has utilized dextrose, fructose, maltose, and sorbitol as carbon source and produced acid in the medium. PANCL was sensitive to Polymyxin B (300 µgm/disc followed by Neomycin (30 µgm/disc, Gentamycin (10 µgm/disc, and Chloramphenicol (30 µgm/disc. PANCL has secreted extracellular lipase, amylase, protease, and exopolysaccharides (EPS. Another fungal strain MAMCC sporulated after 168 h at temperature 30°C and pH 7.0. MAMCC has septate-white mycelium and bears dirty green colored spores. Growth of MAMCC was enhanced in the presence of Neem and Karela-Amla oil (0.1 mL each. Extracellular polysaccharide produced by PANCL and spores of MAMCC promoted growth of dicotyledon Vigna radiata (Mung individually as well as in consortium. Considerable increase in dry weight of Vigna radiata was recorded. Thus, reported PANCL and MAMCC strains have promoted growth Vigna radiata and may be a solution for sustainable agriculture.

  16. Value of timber continues to increase

    International Nuclear Information System (INIS)

    Haluza, I.

    2007-01-01

    The state owned company, Lesy SR (state forests) enjoys great power in the timber industry. It can influence which timber processing companies in Slovakia will be successful and which will not have easy access to the raw material. It manages half of the forests in Slovakia. It is the only seller of timber in this country. Four years ago, the former cabinet appointed banker, Karol Vins, as the director of the company. And he started making changes. He centralized the timber business and thousands of people left the company. The goal was clear -to increase quality and efficiency. The economic performance of the company improved. The company has finally managed to post a profit. Last year, the government changed and so has the director of the company The former banker was replaced by a new head from a forestry research background, Jozef Mindas. He approves of some of the changes introduced by his predecessor and plans to continue implementing them, although there also those he would like to change. The new manager is not concerned regarding the big change from research where he used to work in the past to director of a big company and rejects the allegation that he was nominated by HZDS. I was approached as an expert and I won a tender. I have never been a member of a political party, he stated. He appreciates that his predecessor managed to revitalize the company, which was assisted by the positive effect of out-sourcing. But on the other hand, during transformation forests were not divided up correctly. The division into units did not always take into account the specific requirements of forestry, i.e. some employees in forest units have too much work and some, working in another forest unit, less. We have to make sure that the workload is approximately at the same level everywhere. He is aware of the fact that Lesy SR, which controls two thirds of the timber market, effectively decides which factory will succeed and which one will not. But he adds that Lesy SR do

  17. Reinforcement and recovery of timber structures

    Directory of Open Access Journals (Sweden)

    Antonio Alves Dias

    2006-02-01

    Full Text Available Preservation of timber structures is a reason for constant concern because their deterioration often involves compromising the historical patrimony, besides endangering the safety of the structure, and consequently, of their users. Many are the examples of churches, residences or other constructions where this manifestation is a fact. The technique of reinforcing structurally endangered pieces with the addition of natural or synthetic fibers, is an alternative that has been researched. In the group of synthetic fibers, fiberglass, carbon and aramid ones are included. On the other hand, it has been frequent in the restoration of old buildings, especially in Europe, the employment of materials that were not available in the past, aiming to achieve structural, acoustic and aesthetic benefits. On an existing timber structure floor, a concrete slab has been carried out, with an appropriate connection system among the parts, constituting the composite timber-concrete structures. This alternative has been considered as extraordinarily viable, because it gathers a series of convenience related with the durability and it presents better mechanic performance than conventional timber structures. In this work, the state-of-the-art of the use of fibers as structural reinforcement and of the timber-concrete composite structures, is presented.

  18. Development of Timber Property Classification Based on the End-Use with Reference to Twenty Sri Lankan Timber Species

    Directory of Open Access Journals (Sweden)

    ND Ruwanpathirana

    2014-06-01

    Full Text Available An investigation was carried out on selected 20 timber species of Sri Lanka to study different wood properties, i.e., wood density, modulus of rapture, modulus of elasticity, compression parallel to grain, shrinkage/movement, workability (sawing, nailing, sanding and finishing, treatability of preservative, timber durability, timber texture by vessel diameter and some gross properties, timber colour and present timber uses. Based on the results, an attempt was made to classify the studied timber species into property levels. The final objective of this study was to develop relationships between the end-uses of timber and their property requirements and levels with reference to 20 Sri Lankan timber species.   Timber selection for the use in Sri Lanka is species-oriented and sometimes it is based on the traditional use. Based on wood properties of 20 Sri Lankan timber species selected, an attempt was made to recognise the most important wood properties and their levels to develop a four end-use property classification. In general, the proposed end-use property classification in this study could be differentiated as (i. for building construction, (ii. for furniture and joinery (iii. for light construction, and (iv. for miscellaneous uses. Among the selected timber species, Dipterocarpus zeylanicus is eminently suitable for under-water work. Eucalyptus microcorys is regarded as one of the best timbers for dancing floors. These specialty and causative factors of timber, however, must be explored and documented in order to prepare end-use property classification for miscellaneous use.

  19. Economic implications of manufacturing sawed ties and timbers

    Science.gov (United States)

    Lawrence D. Garrett; Lawrence D. Garrett

    1969-01-01

    The purpose of this paper is to discuss those factors that affect the profitability of manufacturing timbers and show that the combined manufacture of both lumber and timbers will provide a greater daily income than the manufacture of lumber alone.

  20. Timber resource statistics for the Olympic Peninsula, Washington.

    Science.gov (United States)

    Patricia M. Bassett; Daniel D. Oswald

    1961-01-01

    This report summarizes a 1978-79 timber resource inventory of five counties in the Olympic Peninsula of Washington: Clallam, Grays Harbor, Jefferson, Mason, and Thurston. Detailed tables of forest area, timber volume, growth, mortality, and harvest are presented.

  1. Methodology for safety evaluation of existing timber elements

    OpenAIRE

    Sousa, Hélder S.

    2013-01-01

    Tese de doutoramento em Engenharia Civil The past decades have seen a renewed interest in timber research related topics. As instance, timber engineering is not only confined to the design of new construction with innovative wood based products, but also an increasing awareness for the preservation of existing timber structures is visible in nowadays society. Therefore, arises the need for a better understanding of timber performance as a construction material aiming at a bette...

  2. Architectural and structural qualities in timber joints

    DEFF Research Database (Denmark)

    Christensen, Jesper Thøger; Christensen, Mogens Fiil; Damkilde, Lars

    2016-01-01

    Design of joints in timber structures is crucial to reach both elegant and structural efficient designs. Design of joints should therefore be an integral part of the conceptual design phase. Traditionally this is not the case, and joints are often solely designed and analysed in the engineering...... but also increase timbers competitiveness in the building industry. The paper is part of an ongoing research project aiming at providing tools for an integrated design process for timber structures. The focus of the paper is to identify how structure and its joints contributes to architecture and vice...... design phase. The result is joints that function structurally but do not add value to the design, and may even compromise the architectural ideas. With an approach, integrating both structural and architectural design from the beginning, one should not only gain better structures and architecture...

  3. Probabilistic Modelling of Timber Material Properties

    DEFF Research Database (Denmark)

    Nielsen, Michael Havbro Faber; Köhler, Jochen; Sørensen, John Dalsgaard

    2001-01-01

    The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for grading of timber in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be compared. The tail behavior of the probability distributions of timber material characteristics play an important role...... such that they may readily be applied in structural reliability analysis and the format appears to be appropriate for codification purposes of quality control and selection for grading procedures...

  4. 36 CFR 223.62 - Timber purchaser road construction credit.

    Science.gov (United States)

    2010-07-01

    ... § 223.62 Timber purchaser road construction credit. Appraisal may also establish stumpage value as if... timber is appraised and sold on such basis, purchaser credit for road construction, not to exceed the estimated construction cost of such roads or other developments specified in the timber sale contract, shall...

  5. Safety of timber : An analysis of quality control options

    NARCIS (Netherlands)

    Kovryga, A.; Stapel, P.; Van de Kuilen, J.W.G.

    2014-01-01

    The quality assurance of timber properties is important for the safety of timber structures. In the current study, the quality control options of timber are analysed under the prism of the different growth regions. Therefore, these options - machine and output control - are simulated in accordance

  6. Modified traditional Japanese timber joint system with retrofitting abilities

    NARCIS (Netherlands)

    Shiratori, T.; Komatsu, K.; Leijten, A.J.M.

    2008-01-01

    Embedment is a key feature of timber joints envisioned as the ultimate solution in avoiding the devastating full collapse of timber structures in seismic countries. The Japanese traditional timber post-and-beam structural system utilizes moment-resisting joints based on embedment. Despite the

  7. Effect of timber supplies on the efficiency of coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Kulish, S A; Ponikarov, V D

    1977-01-01

    An analysis is made of the system of supplying coal mining production associations with timber materials. The potential for greater efficiency in the use and processing of timber is indicated. The possibility of using methods of mathematical modelling and forecasting to improve the efficiency of supplying timber to coal associations is demonstrated. 1 table.

  8. California’s forest products industry and timber harvest, 2006

    Science.gov (United States)

    Todd A. Morgan; Jason P. Brandt; Kathleen E. Songster; Charles E. Keegan; Glenn A. Christensen

    2012-01-01

    This report traces the flow of California’s 2006 timber harvest through the primary wood products industry (i.e., firms that process timber into manufactured products such as lumber, as well as facilities such as pulp mills and particleboard plants, which use the wood fiber or mill residue directly from timber processors) and provides a description of the structure,...

  9. Enviromentally Sound Timber Extracting Techniques for Small Tree Harvesting

    Science.gov (United States)

    Lihai Wang

    1999-01-01

    Due to large area disturbed and great deal of energy cost during-its operations, introducing or applying the appropriate timber extracting techniques could significantly reduce the impact of timber extraction operations to forest environment while pursuing the reasonable operation costs. Four environmentally sound timber extraction techniques for small tree harvesting...

  10. Recommendations for sustainable development of non-timber forest products

    Science.gov (United States)

    Gina H. Mohammed

    2001-01-01

    Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

  11. Aggregate Timber Supply: From the Forest to the Market

    Science.gov (United States)

    David N. Wear; Subhrendu K. Pattanayak

    2003-01-01

    Timber supply modeling is a means of formalizing the production behavior of heterogeneous landowners managing a wide variety of forest types and vintages within a region. The critical challenge of timber supply modeling is constructing theoretically valid and empirically practical aggregate descriptions of harvest behavior. Understanding timber supply is essential for...

  12. Robustness Analysis of Timber Truss Structure

    DEFF Research Database (Denmark)

    Rajčić, Vlatka; Čizmar, Dean; Kirkegaard, Poul Henning

    2010-01-01

    The present paper discusses robustness of structures in general and the robustness requirements given in the codes. Robustness of timber structures is also an issues as this is closely related to Working group 3 (Robustness of systems) of the COST E55 project. Finally, an example of a robustness...... evaluation of a widespan timber truss structure is presented. This structure was built few years ago near Zagreb and has a span of 45m. Reliability analysis of the main members and the system is conducted and based on this a robustness analysis is preformed....

  13. Timber Elements: Traditional and Modern Strengthening Techniques

    Directory of Open Access Journals (Sweden)

    Raluca Hohan

    2010-01-01

    Full Text Available The main idea of this paper is to analyse the means for the rehabilitation of our cultural heritage timber structures. Several methods together with their application techniques are described, and also, the reasons for what these strengthening operations become imminent at a point. First of all, the necessity of the timber structural elements strengthening is explained through a short presentation of the factors which are degrading the material. Then, certain precautions and strengthening procedures are presented, all involving the usage of traditional materials like wood, metal, or concrete, and of modern materials like fiber reinforced polymeric composite.

  14. Robustness of Long Span Reciprocal Timber Structures

    DEFF Research Database (Denmark)

    Balfroid, Nathalie; Kirkegaard, Poul Henning

    2011-01-01

    engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper makes a discussion of such robustness issues related to the future development of reciprocal timber structures. The paper concludes that these kind of structures can have...... a potential as long span timber structures in real projects if they are carefully designed with respect to the overall robustness strategies.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. The interest has also been facilitated due to recently severe structural failures...

  15. Statistical Analysis of Data for Timber Strengths

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2003-01-01

    Statistical analyses are performed for material strength parameters from a large number of specimens of structural timber. Non-parametric statistical analysis and fits have been investigated for the following distribution types: Normal, Lognormal, 2 parameter Weibull and 3-parameter Weibull...... fits to the data available, especially if tail fits are used whereas the Log Normal distribution generally gives a poor fit and larger coefficients of variation, especially if tail fits are used. The implications on the reliability level of typical structural elements and on partial safety factors...... for timber are investigated....

  16. Projected US timber and primary forest product market impacts of climate change mitigation through timber set-asides

    Science.gov (United States)

    Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

    2013-01-01

    Whereas climate change mitigation involving payments to forest landowners for accumulating carbon on their land may increase carbon stored in forests, it will also affect timber supply and prices. This study estimated the effect on US timber and primary forest product markets of hypothetical timber set-aside scenarios where US forest landowners would be paid to forego...

  17. Extraction of cellulose nanofibers from Pinus oocarpa residues

    Energy Technology Data Exchange (ETDEWEB)

    Manrich, Anny; Martins, Maria Alice, E-mail: anny@daad-alumni.de [EMBRAPA Instrumentacao, Sao Carlos, SP (Brazil); Moraes, Jheyce Cristina; Pasquoloto, Camila [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2016-07-01

    Full text: Pinus oocarpa, which wood is moderately hard and tough, is planted in Brazil for reforestation and employed for timber production used in constructions. The wood residues, such as shavings, bark and sawdust represent 30% to 50% of the total volume of wood production, of which the sawdust is 10%{sup 1}. Cellulose nanofibers is nanomaterials having a diameter between 5 nm and 20 nm and a length of up to hundreds of nm. To obtain nanofibers from cellulose sources, such as sisal and sugarcane bagasse, is used chemical processes, in which the lignocellulosic material initially undergoes pre-treatments to promote partial separation of the cellulose, such as mercerisation and bleaching thus disposing lignin and hemicellulose components. Sequentially, by controlled acid hydrolysis, amorphous regions of the cellulose are removed, and crystalline cellulose is isolated in the form of cellulose nanofibers. In this work, nanofibers from sawdust of Pinnus oocarpa, containing 44.8 wt% of cellulose 20.6 wt% hemicellulose and 30.0 wt% insoluble lignin were isolated by mercerisation (NaOH 5%, 80°C, 120 min), followed by bleaching (NaOH + acetic acid + NaClO{sub 2}, 80 deg C, 240min) and acid hydrolysis (60 wt% sulfuric acid, 45 °C, 40min). Nanofibers obtained were characterized by DRX and SEM-FEG. Results showed that, for used conditions, fiber acid hydrolysis was not complete, therefore a biphasic suspension was formed. Crystallinity index achieved was not much higher than that from pinus fiber itself, increasing from 62% to 65% and signs of cellulose type II were observed. SEM images showed elongated fibers, which have diameter of 15 ± 5 nm and length of hundreds of nm, what means that they have a large L/D aspect ratio. Nanofiber extraction yield was very low (1.3 wt% of initial residue). All steps of the process are being reviewed aiming at better results. 1) Morais, S. A. L.; Nascimento E. A. e D. C. Melo, 2005, R. Árvore, 29, 3, 461-470. (author)

  18. Rent-seeking and timber rights allocation in Ghana

    DEFF Research Database (Denmark)

    Carlsen, Kirsten; Hansen, Christian Pilegaard

    2014-01-01

    This paper describes types, processes and importance of rent-seeking in the allocation of timber rights in Ghana. It is based on an analysis of 30 interviews with large-, medium- and small-scale timber firms, as well as government officials and timber industry organizations in Ghana. The paper...... documents that timber rights allocation is associated with both bureaucratic and political corruption. The latter comes in two forms. First, the findings suggest that well-established relationships exist between politicians and senior bureaucrats on the one side and large-scale timber firms on the other...

  19. Evaluation of the load carrying capacity of large cross section coniferous timber in standing structures

    Directory of Open Access Journals (Sweden)

    Arriaga, F.

    2005-12-01

    Full Text Available A total of 85 large section timber pieces (Pinus sylvestris L. and Pinus pinaster Alt. found in a number of old buildings were visually analyzed and graded pursuant to Spanish standard UNE 56544 and German standard 4074. The object was to formulate a non-destructive method to reliably and effectively determine the mechanical properties of existing timber structures with large cross sections. A new system is proposed based on the chief visual grading parameters and consisting in a single grade; the percentage of rejections with this system is low. In this regard, a specific strength class is established for large cross section members in existing coniferous wood structures, namely F14/E9/D380 (MOR of 14 N/mm2, MOE of 9 kN/mm2 and characteristic density of 380 kg/m3. The use of ultrasonic velocity is proposed to define the next higher strength class - F16/E10/D380, to which timber with velocities of 4,900 m/s or over would be assigned.

    Se han clasificado visualmente 85 piezas de madera de gruesa sección (Pino silvestre y Pino pinaster procedentes de varios edificios antiguos de acuerdo con las normas UNE 56544 y DIN 4074. El objetivo es establecer una metodología no destructiva para asignar propiedades mecánicas a las piezas de estructuras existentes de madera con gruesas escuadrías con un nivel de seguridad y de rendimiento aceptables. Se propone un único grado de calidad con un porcentaje bajo de rechazos, aplicando los principales parámetros de la clasificación visual. De esta forma, se establece una clase resistente específica para las piezas de gruesa escuadría de estructuras de madera de conifera existentes definida como FI4/E9/D380 (resistencia característica a flexión igual a 14 N/mm2, módulo de elasticidad de 9 kN/mn2 y densidad característica de 380 kg/m3. Para alcanzar una clase resistente superior se propone utilizar el parámetro añadido de la

  20. Space-time modeling of timber prices

    Science.gov (United States)

    Mo Zhou; Joseph Buongriorno

    2006-01-01

    A space-time econometric model was developed for pine sawtimber timber prices of 21 geographically contiguous regions in the southern United States. The correlations between prices in neighboring regions helped predict future prices. The impulse response analysis showed that although southern pine sawtimber markets were not globally integrated, local supply and demand...

  1. Standard plans for timber bridge superstructures

    Science.gov (United States)

    James P. Wacker; Matthew S. Smith

    2001-01-01

    These standardized bridge plans are for superstructures consisting of treated timber. Seven superstructure types are includes: five longitudinal and two transverse deck systems. Both HS520 and HS25 loadings are included, along with L/360 and L/500 deflection criteria.

  2. Timber resource of Minnesota's Prairie unit, 1977.

    Science.gov (United States)

    Jerold T. Hahn; W. Brad Smith

    1980-01-01

    The fourth inventory of Minnesota's Prairie Unit shows that although commercial forest area decreased 31.7% between 1962 and 1977, growing-stock volume increased 22%. This report gives statistical highlights and contains detailed tables of forest area as well as timber volume, growth, mortality, ownership, and use.

  3. Projecting Timber Inventory at the Product Level

    Science.gov (United States)

    Lawrence Teeter; Xiaoping Zhou

    1999-01-01

    Current timber inventory projections generally lack information on inventory by product classes. Most models available for inventory projection and linked to supply analyses are limited to projecting aggregate softwood and hardwood. The research presented describes a methodology for distributing the volume on each FIA (USDA Forest Service Forest Inventory and Analysis...

  4. Residual load carrying capacity of timber joints

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de

    1999-01-01

    Timber joints that have been preloaded for 2 to 8 years have been short term tested in accordance with EN 26891. The applied load levels varied between 30% and 50% of the average short term strength. The study comprised nailed, toothed-plate and split-ring joints. All joints were made of spruce and

  5. Commercial lumber, round timbers, and ties

    Science.gov (United States)

    David E. Kretschmann

    2010-01-01

    When sawn, a log yields round timber, ties, or lumber of varying quality. This chapter presents a general discussion of grading, standards, and specifications for these commercial products. In a broad sense, commercial lumber is any lumber that is bought or sold in the normal channels of commerce. Commercial lumber may be found in a variety of forms, species, and types...

  6. Grading timber and glued structural members

    Science.gov (United States)

    David E. Kretschmann; Roland Hernandez

    2006-01-01

    Because of its biological nature, which is influenced by many factors as discussed in Chapter 6, the quality of timber is enormously variable. Therefore, some sort of arrangement or classification must be undertaken prior to its use, in order to get the most out of this valuable resource. It is obvious that not all lumber can be used for the same purposes because not...

  7. Pocket Checklists of Indonesian timber trees

    NARCIS (Netherlands)

    Prawira, Soewanda A.; Tantra, I.G.M.; Whitmore, T.C.

    1984-01-01

    Indonesia as yet does not have a comprehensive account of the forest trees which reach timber size (35 cm dbh = 14 inch or 105 cm gbh = 42 inch). A project has been started in August 1983 by the Botany Section of the Forest Research Institute in Bogor, Indonesia, to prepare pocket checklists of the

  8. Non-timber forest products in Hawaii

    Science.gov (United States)

    Katie Kamelamela; James B. Friday; Tamara Ticktin; Ashley. Lehman

    2015-01-01

    Hawaiian forests provide a wide array of non-timber forest products for both traditional and modern uses. Flowers, vines, and ferns are collected for creating garlands or lei for hula dances and parades. Lei made from materials gathered in the forest are made for personal use and sold, especially during graduation times. Bamboo is harvested for structures and for...

  9. Volcanic mercury in Pinus canariensis

    Science.gov (United States)

    Rodríguez Martín, José Antonio; Nanos, Nikos; Miranda, José Carlos; Carbonell, Gregoria; Gil, Luis

    2013-08-01

    Mercury (Hg) is a toxic element that is emitted to the atmosphere by both human activities and natural processes. Volcanic emissions are considered a natural source of mercury in the environment. In some cases, tree ring records taken close to volcanoes and their relation to volcanic activity over time are contradictory. In 1949, the Hoyo Negro volcano (La Palma-Canary Islands) produced significant pyroclastic flows that damaged the nearby stand of Pinus canariensis. Recently, 60 years after the eruption, we assessed mercury concentrations in the stem of a pine which survived volcano formation, located at a distance of 50 m from the crater. We show that Hg content in a wound caused by pyroclastic impacts (22.3 μg kg-1) is an order of magnitude higher than the Hg concentrations measured in the xylem before and after the eruption (2.3 μg kg-1). Thus, mercury emissions originating from the eruption remained only as a mark—in pyroclastic wounds—and can be considered a sporadic and very high mercury input that did not affect the overall Hg input in the xylem. In addition, mercury contents recorded in the phloem (9.5 μg kg-1) and bark (6.0 μg kg-1) suggest that mercury shifts towards non-living tissues of the pine, an aspect that can be related to detoxification in volcanism-adapted species.

  10. Volcanic mercury in Pinus canariensis.

    Science.gov (United States)

    Rodríguez Martín, José Antonio; Nanos, Nikos; Miranda, José Carlos; Carbonell, Gregoria; Gil, Luis

    2013-08-01

    Mercury (Hg) is a toxic element that is emitted to the atmosphere by both human activities and natural processes. Volcanic emissions are considered a natural source of mercury in the environment. In some cases, tree ring records taken close to volcanoes and their relation to volcanic activity over time are contradictory. In 1949, the Hoyo Negro volcano (La Palma-Canary Islands) produced significant pyroclastic flows that damaged the nearby stand of Pinus canariensis. Recently, 60 years after the eruption, we assessed mercury concentrations in the stem of a pine which survived volcano formation, located at a distance of 50 m from the crater. We show that Hg content in a wound caused by pyroclastic impacts (22.3 μg kg(-1)) is an order of magnitude higher than the Hg concentrations measured in the xylem before and after the eruption (2.3 μg kg(-1)). Thus, mercury emissions originating from the eruption remained only as a mark-in pyroclastic wounds-and can be considered a sporadic and very high mercury input that did not affect the overall Hg input in the xylem. In addition, mercury contents recorded in the phloem (9.5 μg kg(-1)) and bark (6.0 μg kg(-1)) suggest that mercury shifts towards non-living tissues of the pine, an aspect that can be related to detoxification in volcanism-adapted species.

  11. Assessment of the variation of the moisture content in the Pinus pinaster Ait. using the non destructive GPR technique

    Directory of Open Access Journals (Sweden)

    Díez Barra, R.

    2011-03-01

    Full Text Available The moisture content variations in wood have a significant influence in wood’s physicochemical properties, as well as in its electromagnetic properties and to specific effects upon waves’ characteristics. In particular, this paper focuses on the analysis of the Ground-penetrating Radar’s (GPR using an antenna of 1.6GHz central frequency capacity to register the velocity and the amplitude of the electromagnetic waves’ variation during the drying process of Pinus pinaster Ait timber joists. The results showed that when timber MC descends, the propagation velocity and amplitude of both the direct and the reflected wave increased. The high correlation found between the variables studied demonstrates GPR efficiency and the innovative application of this technique as a non-destructive evaluation tool for timber structures, particularly when studying its moisture content.La variación en el contenido de humedad (CH tiene una influencia significativa tanto en las propiedades físico- químicas de la madera, como en sus propiedades electromagnéticas y por tanto afecta a las características de la propagación de las ondas. En concreto, en este trabajo se estudia la capacidad del georradar (GR empleando una antena de 1.6GHz de frecuencia central para registrar las variaciones que se producen en la velocidad y en la amplitud de las ondas electromagnéticas cuando se propagan en unas viguetas de madera de Pinus pinaster Ait de uso estructural cuyo CH va disminuyendo. Se ha comprobado como cuando el CH descendía la velocidad de propagación y las amplitudes, tanto de la onda directa como de la reflejada aumentaba. Los altos factores de correlación encontrados demuestran que el GR es una técnica capaz de evaluar, de forma no destructiva, el CH de la madera de uso estructural.

  12. IMPACTS OF TIMBER LEGALITY VERIFICATION SYSTEM IMPLEMENTATION ON THE SUSTAINABILITY OF TIMBER INDUSTRY AND PRIVATE FOREST

    Directory of Open Access Journals (Sweden)

    Elvida Yosefi Suryandari

    2017-04-01

    Full Text Available International market requires producers to proof the legality of their wood products to address the issues of illegal logging and illegal trade. Timber Legality Verification System (TLVS has been prepared by the Government of Indonesia that covering the upstream and downstream wood industries. This paper aims to evaluate gaps in the implementation of TLVS policy and its impact on the sustainability of timber industry. This study was using gap, descriptive and costs-structure analyzes. The study was conducted in three provinces, namely: DKI Jakarta, West Java and D.I. Yogyakarta. Research found that the effectiveness of the TLVS implementation was low due to relatively rapid policy changes. This situation became disincetive for investments in timber business. Private sector perceived that TLVS policy should be applied in the upstream of timber business. Hence, the industry and market in the downstream have not been fully support to this system. Furthermore, TLVS policy implementation was considered ineffective by timber industry as well as private forest managers, especially by micro industry and smallholder private forests. This situation threatened the sustainability of timber industry and private forests. Therefore, Institutions should be strengthened in order to improve the quality of human resources and the competitiveness of products.

  13. THE ALLELOPATHIC EFFECT OF SHREDDED LEAVES OF ARTOCARPUS HETEROPHYLLUS AND A. ALTILIS ON VIGNA RADIATA L

    OpenAIRE

    Romilly Margaret Mendez* & Glaxy Ezekel.V

    2017-01-01

    In the present study, an attempt has been made to study the effect of Artocarpus heterophyllus Lam. and Artocarpus altilis (Parkinson) Fosberg on seed germination, seedling growth and total phenolic content of Vigna radiata L. The objective of this study is to assess the rate of germination, growth of the seedlings and the chlorophyll content of the cultivar seeds exposed to four concentrations (10 ppm, 1 ppm, 0.1 ppm and 0.01 ppm) of the leaf extracts of A. heterophyllus and A. altilis. I...

  14. Characterization of seasonal reproductive and stress steroid hormones in wild Radiated Tortoises, Astrochelys radiata.

    Science.gov (United States)

    Currylow, Andrea F T; Rafeliarisoa, Tsilavo H; Louis, Edward E; Stanford, Craig B; Randrianjafizanaka, Soary T; Chinn, Sarah M; Crocker, Daniel E

    2017-11-01

    The critically endangered Radiated Tortoise (Astrochelys radiata) is endemic to the southern coastlines of Madagascar. Once common, wild populations of this tortoise have undergone dramatic declines in recent years. Although there have been studies documenting reproductive activities, reproductive physiological parameters are unknown yet may be crucial in the recovery of the species. Over four research seasons in remote field locations native to A. radiata, we surveyed for, radio-tracked, and sampled wild, free ranging tortoises. We sampled and measured stress and reproductive parameters (corticosterone [CORT], testosterone [T], estradiol-17β [E2], and progesterone [P]) in 311 plasma samples from 203 wild A. radiata, capturing their active period. Generally, hormone concentrations were associated with body condition, temperature, and humidity. There was wide variation in CORT that varied monthly and by group. Juvenile tortoises maintained more than twice the mean basal CORT concentrations than either adult sex, with the most dramatic distinctions in the middle of the wet season. For adult sex hormones, the last months of the dry season and into the wet season when ground humidities are low and just begin to rise prior to temperature declines, male T concentrations gradually increased to a peak before returning to near undetectable values into the dry season. We had limited data for T concentrations in females, but found average T concentrations were much lower than in males and positively correlated with larger female home range sizes. For female hormone cycles, E2 also peaked in the early 1/3 of the wet season along with male T, and was followed by an uptick in P which correlates to the putative ovulatory cycle. Females tracked over four years showed variation in patterns of P, indicating that number and frequency of clutches vary. Our results suggest that 1) there is high species plasticity in response to stress; 2) A. radiata reproductive cycling is somewhat

  15. Induction of chlorophyll chimeras and chlorophyll mutations in mungbean (Vigna radiata) cv. T44

    International Nuclear Information System (INIS)

    Singh, V.P.; Yadav, R.D.S.

    1993-01-01

    Uniform and healthy seeds of mungbean (Vigna radiata) cv. T44 were exposed to varying doses of gamma rays, ethyl methane sulphonate (EMS) and combination treatment of gamma rays with EMS. The data were recorded for seed germination, plant survival, frequency and spectrum of chlorophyll chimeras in M 1 and chlorophyll mutations in M 2 generation. Among all, the combination treatments were found most effective for inducing chlorophyll chimeras and chlorophyll mutations than the gamma rays or EMS alone. Of the mutants under reference, the albino, xantha and chlorina showed monogenic recessive while viridis exhibited digenic recessive inheritance. (author). 8 refs., 2 tabs

  16. Effect of chronic administration of Tamoxifen on fertility in male bonnet monkeys (Macaca radiata).

    Science.gov (United States)

    Rao, A J; Ramachandra, S G; Ramesh, V; Krishnamurthy, H N; Jayaraman, S; Gopalakrishnan, K; Juneja, H S

    1998-01-01

    Administration of Tamoxifen via the Alzet pump at a rate of 50 micrograms hr-1 for 90 days in the adult male bonnet monkeys Macaca radiata had no effect on the serum testosterone concentration determined at 10 AM and 10 PM as well as total sperm count determined at 15-day intervals over a period of 260 days. However, a significant reduction in sperm motility was observed beyond 90 days up until the 225th day. Breeding studies conducted from day 90 to 260 revealed that these males were infertile.

  17. Regeneration of Pinus cubensis Griseb. plants

    Directory of Open Access Journals (Sweden)

    Raima Cantillo Ardebol

    2011-01-01

    Full Text Available Micropropagation of plants from the genus Pinus has been done in several species. However, micropropagation of Pinus cubensis Griseb has not been reported. This species has a great economical importance. Then, the aim of the current research was to achieve in vitro propagation of Pinus cubensis Griseb. to increase the number of individuals in their natural habitat. The concentration of sodium hypochlorite and immersion time were determined for seeds disinfection and embryos establishment. The effect of the presence or absence of the seed coat was also studied. Two growth regulators and three concentrations of each one were tested to achieve the emission of axillary buds in the multiplication phase. Five subcultures every 21 days were done. Rooting and acclimatization were carried out simultaneously. Shoots were individualized and immersed in a rooting solution. Zygotic embryos of P. cubensis wer e dev el o ped in vitro. The highest percentages of disinfection and germination were obtained by introducing the seeds in a solution of sodium hypochlorite at 20% for 15 minutes, planting them after that without the seed coat. The number and length of axillary buds increased by using 22.5 µM of 6-benzylaminopurine and 5.4 µM naphthaleneacetic acid in the multiplication phase. The in vitro propagation of Pinus cubensis Griseb. from zygotic embryos was achieved for the first time. A protocol was also established, reaching 50% of survival in the acclimatization phase. Key words: acclimatization, axillary buds, forestry, multiplication, pinus

  18. Pinus halepensis, Pinus pinaster, Pinus pinea and Pinus sylvestris Essential Oils Chemotypes and Monoterpene Hydrocarbon Enantiomers, before and after Inoculation with the Pinewood Nematode Bursaphelenchus xylophilus.

    Science.gov (United States)

    Rodrigues, Ana M; Mendes, Marta D; Lima, Ana S; Barbosa, Pedro M; Ascensão, Lia; Barroso, José G; Pedro, Luis G; Mota, Manuel M; Figueiredo, A Cristina

    2017-01-01

    Pinewood nematode (PWN), Bursaphelenchus xylophilus, is the causal agent of pine wilt disease, a serious threat to global forest populations of conifers, especially Pinus spp. A time-course study of the essential oils (EOs) of 2-year-old Pinus halepensis, Pinus pinaster, Pinus pinea and Pinus sylvestris following inoculation with the PWN was performed. The constitutive and nematode inoculation induced EOs components were analyzed at both the wounding or inoculation areas and at the whole plant level. The enantiomeric ratio of optically active main EOs components was also evaluated. External symptoms of infection were observed only in P. pinaster and P. sylvestris 21 and 15 days after inoculation, respectively. The EO composition analysis of uninoculated and unwounded plants revealed the occurrence of chemotypes for P. pinaster, P. halepensis and P. sylvestris, whereas P. pinea showed a homogenous EO composition. When whole plants were evaluated for EO and monoterpene hydrocarbon enantiomeric chemical composition, no relevant qualitative and quantitative differences were found. Instead, EO analysis of inoculated and uninoculated wounded areas revealed an increase of sesquiterpenes and diterpenic compounds, especially in P. pinea and P. halepensis, comparatively to healthy whole plants EOs. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

  19. Pinus taeda AND Pinus oocarpa PLYWOOD MANUFACTURING WITH FENOL-FORMALDHEYDE RESIN

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2002-01-01

    Full Text Available The objective of this study was to evaluate the quality of the plywood, manufactured from Pinus taeda and Pinus oocarpa, with 20 and 24 years old respectively, using three differentformulations of the fenol-formaldheyde resin. The results of the glue line shearing tests not showed statistical differences between the species and three resin formulations. In the hot water test, all of the boards were classified as “BR” and, the boards of the Pinus oocarpa produced with formulations (1and (3, were classified as “WBP”. The different resin formulations not influenced on the modulus ofelasticity (MOE and modulus of rupture (MOR The boards of Pinus taeda with formulations (1 and(2 showed higher values of MOE in comparison of the Pinus oocarpa. The MOR of the Pinus oocarpa withformulation (2 was higher than Pinus taeda. The mechanical properties of the plywood wereprobably influenced by wood variability related to sapwood and hartwood, thickness of growth ringsand, springwood and summerwood.

  20. Evaluation of the present genetic conservation efforts in Pinus sylvestris, Picea abies, Quercus spp., Fagus sylvatica, and Pinus pinaster

    NARCIS (Netherlands)

    Kramer, K.

    2015-01-01

    Information on genetic diversity and gene conservation activities were combined with climatic data to evaluate the present genetic conservation efforts in Pinus sylvestris, Picea abies, Quercus spp., Fagus sylvatica, and Pinus pinaster. Combinations of climatic variables explained much of the

  1. 28-Homobrassinolide mitigates boron induced toxicity through enhanced antioxidant system in Vigna radiata plants.

    Science.gov (United States)

    Yusuf, Mohammad; Fariduddin, Qazi; Ahmad, Aqil

    2011-11-01

    The objective of this study was to establish relationship between boron induced oxidative stress and antioxidant system in Vigna radiata plants and also to investigate whether brassinosteroids will enhance the level of antioxidant system that could confer tolerance to the plants from the boron induced oxidative stress. The mung bean (V. radiata cv. T-44) plants were administered with 0.50, 1.0 and 2.0 mM boron at 6 d stage for 7 d along with nutrient solution. At 13 d stage, the seedlings were sprayed with deionized water (control) or 10(-8) M of 28-homobrassinolide and plants were harvested at 21 d stage to assess growth, leaf gas-exchange traits and biochemical parameters. The boron treatments diminished growth, water relations and photosynthetic attributes along with nitrate reductase and carbonic anhydrase activity in the concentration dependent manner whereas, it enhanced lipid peroxidation, electrolyte leakage, accumulation of H(2)O(2) as well as proline, and various antioxidant enzymes in the leaves of mung bean which were more pronounced at higher concentrations of boron. However, the follow-up application of 28-homobrassinolide to the boron stressed plants improved growth, water relations and photosynthesis and further enhanced the various antioxidant enzymes viz. catalase, peroxidase and superoxide dismutase and content of proline. The elevated level of antioxidant enzymes as well as proline could have conferred tolerance to the B-stressed plants resulting in improved growth, water relations and photosynthetic attributes. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Biochemical Changes under Chromium Stress on Germinating Seedlings of Vigna radiata

    Directory of Open Access Journals (Sweden)

    Bhavin SUTHAR

    2014-03-01

    Full Text Available Hexavalant chromium is considered the most toxic form because of its high solubility in water. Cr is known to induce production of elevated concentration of reactive oxygen species (ROS resulted in macromolecule damage. Plants are having unique mechanisms to overcome ROS induced damage by accumulation of proline, ascorbate and glutathione and increasing the activities of antioxidant enzymes such as superoxide dismutase (SOD, catalase (CAT, glutathione reductase (GR, and ascorbate peroxidaes (APX, peroxidise (POX. In the present investigation effects of chromium on seed germination of Mung bean (Vigna radiata 'Gujarat Mung-4’ were studied. Seeds were treated with different Cr concentrations (50, 100, 150 and 200 4M for seven days. On 7th day root and shoot length was measured and activities of antioxidant enzyme SOD, APX, POX, CAT and GR were checked along with protein, proline and lipid peroxidation. It was observed that there is gradual decrease in shoot and root length with respect to the increase in Cr concentration. Level of lipid peroxidation significantly increased along with proline and antioxidant enzyme activity at higher Cr concentration. Lipid peroxidation is an indication of membrane damage due to elevated production of reactive oxygen species (ROS. To combat oxidative damage by ROS antioxidant enzyme activity increased significantly, which indicates that antioxidant enzymes (SOD, CAT, APX and GR play a crucial role during Cr stress during germination of V. radiata.

  3. Identification of Bradyrhizobium elkanii Genes Involved in Incompatibility with Vigna radiata

    Directory of Open Access Journals (Sweden)

    Hien P. Nguyen

    2017-12-01

    Full Text Available The establishment of a root nodule symbiosis between a leguminous plant and a rhizobium requires complex molecular interactions between the two partners. Compatible interactions lead to the formation of nitrogen-fixing nodules, however, some legumes exhibit incompatibility with specific rhizobial strains and restrict nodulation by the strains. Bradyrhizobium elkanii USDA61 is incompatible with mung bean (Vigna radiata cv. KPS1 and soybean cultivars carrying the Rj4 allele. Here, we explored genetic loci in USDA61 that determine incompatibility with V. radiata KPS1. We identified five novel B. elkanii genes that contribute to this incompatibility. Four of these genes also control incompatibility with soybean cultivars carrying the Rj4 allele, suggesting that a common mechanism underlies nodulation restriction in both legumes. The fifth gene encodes a hypothetical protein that contains a tts box in its promoter region. The tts box is conserved in genes encoding the type III secretion system (T3SS, which is known for its delivery of virulence effectors by pathogenic bacteria. These findings revealed both common and unique genes that are involved in the incompatibility of B. elkanii with mung bean and soybean. Of particular interest is the novel T3SS-related gene, which causes incompatibility specifically with mung bean cv. KPS1.

  4. Framework for Robustness Assessment of Timber Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2011-01-01

    This paper presents a theoretical framework for the design and analysis of robustness of timber structures. This is actualized by a more4 frequent use of advanced types of timber structures with limited redundancy and serious consequences in the case of failure. Combined with increased requirements...... to efficiency in design and execution followed by increased risk of human errors has made the need of requirements to robustness of new structures essential. Further, the collapse of the Ballerup Super Arena, the bad Reichenhall Ice-Arena and a number of other structural systems during the last 10 years has...... increased the interest in robustness. Typically, modern structural design codes require that ‘the consequence of damages to structures should not be disproportional to the causes of the damages’. However, although the importance of robustness for structural design is widely recognized, the code requirements...

  5. Timber Curtain: Designing with material capabilities

    DEFF Research Database (Denmark)

    Lahmy, Maya; Larsen, Niels Martin

    2015-01-01

    of the generative phase to fabrication of the artefact. Brought together by various conceptual and structural elements the Timber Curtain forms a 4.5 x 2.5 x 0.5 m construct of assembled wood components, digitally crafted through advanced production techniques. Concerned with materiality and processing of the wood......Timber Curtain explores relations between digital precision and material indeterminacy. It is an installation engaging spatially through its presence as a 1:1 architectural component as well as it is exploring novel technologies in the architectural design process from the very beginning...... an associative digital model that could gather and compute in put from material behaviour and out put manufacturing data was scripted. This method enables material capacity to be pushed to the limit of its performance allowing novel sensuous and structural qualities to emerge. The method is developed with use...

  6. Robustness Assessment of Spatial Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning

    2012-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern buildi...... to robustness of spatial timber structures and will discuss the consequences of such robustness issues related to the future development of timber structures.......Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious consequences in case of failure. In order to minimise the likelihood of such disproportionate structural failures many modern building...... codes consider the need for robustness of structures and provide strategies and methods to obtain robustness. Therefore a structural engineer may take necessary steps to design robust structures that are insensitive to accidental circumstances. The present paper summaries issues with respect...

  7. Probabilistic Modeling of Graded Timber Material Properties

    DEFF Research Database (Denmark)

    Faber, M. H.; Köhler, J.; Sørensen, John Dalsgaard

    2004-01-01

    The probabilistic modeling of timber material characteristics is considered with special emphasis to the modeling of the effect of different quality control and selection procedures used as means for quality grading in the production line. It is shown how statistical models may be established...... on the basis of the same type of information which is normally collected as a part of the quality control procedures and furthermore, how the efficiency of different control procedures may be quantified and compared. The tail behavior of the probability distributions of timber material characteristics plays...... such that they may readily be applied in structural reliability analysis and their format appears to be appropriate for codification purposes of quality control and selection for grading procedures....

  8. Timber drying kilns using solar energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-15

    The objective of this project was to research the potential for solar kilns for drying timber in tropical countries (Guyana, Honduras and Belize) and produce a manual which will provide the knowledge necessary to build and operate a solar kiln. The main output of the project is the manual Solar Heated Timber Drying Kilns - a Manual on their Design and Operation. The manual covers:- background information; selection of construction materials; methods of kiln construction; kiln operation and maintenance procedure. The manual has been designed to provide the necessary knowledge and confidence to build and operate a solar kiln, and ultimately benefit from an improved product. Specifically, the manual will benefit small building construction units, furniture and joinery manufacturers and sawmill operators in developing and developed countries worldwide. (author)

  9. Comparison of traditional field retting and Phlebia radiata Cel 26 retting of hemp fibres for fibre-reinforced composites

    DEFF Research Database (Denmark)

    Liu, Ming; Ale, Marcel Tutor; Kołaczkowski, Bartłomiej

    2017-01-01

    Classical field retting and controlled fungal retting of hemp using Phlebia radiata Cel 26 (a mutant with low cellulose degrading ability) were compared with pure pectinase treatment with regard to mechanical properties of the produced fibre/epoxy composites. For field retting a classification...

  10. Leaf area index, biomass carbon and growth rate of radiata pine genetic types and relationships with LiDAR

    Science.gov (United States)

    Peter N. Beets; Stephen Reutebuch; Mark O. Kimberley; Graeme R. Oliver; Stephen H. Pearce; Robert J. McGaughey

    2011-01-01

    Relationships between discrete-return light detection and ranging (LiDAR) data and radiata pine leaf area index (LAI), stem volume, above ground carbon, and carbon sequestration were developed using 10 plots with directly measured biomass and leaf area data, and 36 plots with modelled carbon data. The plots included a range of genetic types established on north- and...

  11. Timbered masonry for earthquake resistance in Europe

    OpenAIRE

    Dutu, A.; Gomes Ferreira, J.; Guerreiro, L.; Branco, F.; Gonçalves, A. M.

    2012-01-01

    Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their struc...

  12. Timbered masonry for earthquake resistance in Europe

    OpenAIRE

    Dutu, A.; Gomes Ferreira, J.; Guerreiro, L.; Branco, F.; Gonçalves, A. M.

    2012-01-01

    Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their str...

  13. Roof timber for fortifying mining works

    Energy Technology Data Exchange (ETDEWEB)

    Shirokov, A P; Kuntsevich, V IK; Pishchulin, V V; Seryi, A M; Volkov, P A

    1981-05-15

    The roof timber for fortifying mining works includes spring-mounted hinged elements made from a special rolled metal. In order to increase the carrying capacity of the support by increasing the deformation threshold, the springs are mounted by their expanded section to the lower side of the hinge; their ends are connected in turn to the elements made from the special rolled metal on both sides of the hinge.

  14. Timber joints under long-term loading

    DEFF Research Database (Denmark)

    Feldborg, T.; Johansen, M.

    This report describes tests and results from stiffness and strength testing of splice joints under long-term loading. During two years of loading the spicimens were exposed to cyclically changing relative humidity. After the loading period the specimens were short-term tested. The connectors were...... integral nail-plates and nailed steel and plywood gussets. The report is intended for designers and researchers in timber engineering....

  15. State forest timber sales in 2006

    International Nuclear Information System (INIS)

    Office National des Forets

    2007-01-01

    For the first time since the 1999 storms, forest owners have experienced a favourable market. The combination of buoyant demand for both industrial round-wood and timber and consolidation of supply led to a significant increase in prices. With a logging volume of 15 million m 3 (standing timber equivalent), state forest timber supply has remained at a high level, slightly above that of 1999. The improved business cycle situation has pushed prices up, including for beech for which rates had stagnated for some time. However, in spite of the 15% rise compared to 2005, the average per cubic metre price sold by the ONF (31.20 euros), all categories of timber and all state forests taken together, remains well below the average for the 1996-1999 period (37.80 euros). While unsold stocks have fallen considerably, the ONF has sought to facilitate access to products by industry by modernising its sales methods in line with the new 2005 legislative and regulatory provisions. Greater flexibility in the rules applicable to privately negotiated spot sales and supply contracts should over time contribute to stabilizing and reducing the accessory costs of supply. The changes implemented over the last decade in favour of private sales, which now account for nearly 40% of volumes sold, should continue in the future. Of those volumes, 20% were sold under supply contracts, a proportion that is rising sharply. These contracts covered more than one million m 3 in 2006, encouraging the ONF to adopt a new sales scheme and establish structures for consultations with both forest municipalities and the downstream component of the industry. (authors)

  16. Markets, Government Policy, and China’s Timber Supply

    Science.gov (United States)

    Han Zhang; Joseph Buongiorno

    2012-01-01

    China’s domestic demand and exports of wood products are rising rapidly compared to domestic supply. The determinants of timber supply in China were investigated with panel data from 25 provinces from 1999 to 2009. The results indicated that China’s timber supply had responded to both market forces, reflected by timber prices largely determined by world demand and...

  17. Ranking independent timber investments by alternative investment criteria

    Science.gov (United States)

    Thomas J. Mills; Gary E. Dixon

    1982-01-01

    A sample of 231 independent timber investments were ranked by internal rate of return, present net worth per acre and the benefit cost ratio—the last two discounted by 3, 6.4. 7.5. and 10 percent—to determine if the different criteria had a practical influence on timber investment ranking. The samples in this study were drawn from a group of timber investments...

  18. Study on the ventilation resistance of timbered airways (II)

    Energy Technology Data Exchange (ETDEWEB)

    Oba, S; Takiguchi, I

    1977-01-01

    From the results of a model study described in a previous paper (I), (Vol.23, No.4), a timber factor Kr is determined as a specific parameter for type of timber and as a function of spacing ratio d/e where d and e are the spacing and the height of sets respectively. A general formula for the determination of the friction coefficient of timbered airways is also proposed.

  19. Susceptibility of Diaphorina citri (Hemiptera: Liviidae) and Its Parasitoid Tamarixia radiata (Hymenoptera: Eulophidae) to Entomopathogenic Fungi under Laboratory Conditions.

    Science.gov (United States)

    Ibarra-Cortés, K H; Guzmán-Franco, A W; González-Hernández, H; Ortega-Arenas, L D; Villanueva-Jiménez, J A; Robles-Bermúdez, A

    2018-02-01

    Diaphorina citri (Kuwayama) is a global pest of citrus that transmits the bacteria associated with the disease, Huanglongbing. Entomopathogenic fungi and the parasitoid Tamarixia radiata (Waterston) are important biological control agents of this pest and likely to interact in D. citri populations. As a basis for interaction studies, we determined the susceptibility of nymphs and adults of D. citri and adults of the parasitoid T. radiata to six fungal isolates from the species Beauveria bassiana s.l. (Bals.-Criv.) Vuill. (isolates B1 and B3), Metarhizium anisopliae s.s. (Metsch.) (Ma129 and Ma65) and Isaria fumosorosea Wize (I2 and Pae). We conducted experiments evaluating infection levels in all three insect groups following inoculation with a series of conidial concentrations (1 × 10 4 -1 × 10 8 conidia mL -1 ). Results showed that D. citri nymphs and T. radiata were more susceptible to fungal isolates than D. citri adults. Overall, B. bassiana and M. anisopliae isolates caused the greatest infection compared with I. fumosorosea isolates in all three groups of insects. Isolates B1 (B. bassiana) and Ma129 (M. anisopliae) infected a greater proportion of adults and nymphs of D. citri, respectively. Both isolates of B. bassiana caused greater infection in T. radiata compared with isolates of the other fungal species. We propose that isolates B1 and Ma129 are the strongest candidates for control of D. citri. Our results represent the first report of entomopathogenic fungi infecting T. radiata, and the basis for future studies to design a biological control programme that uses both agents more efficiently against D. citri populations.

  20. Lethal and Sublethal Impacts of Acaricides on Tamarixia radiata (Hemiptera: Eulophidae), an Important Ectoparasitoid of Diaphorina citri (Hemiptera: Liviidae).

    Science.gov (United States)

    Lira, A C S; Zanardi, O Z; Beloti, V H; Bordini, G P; Yamamoto, P T; Parra, J R P; Carvalho, G A

    2015-10-01

    The use of synthetic acaricides for management of pest mites may alter the efficacy of the ectoparasitoid Tamarixia radiata (Waterston) in biological control of Diaphorina citri Kuwayama, the vector of the bacteria associated with huanglongbing (HLB) in citrus orchards. We evaluated the toxicity of 16 acaricides that are recommended for the control of citrus-pest mites to T. radiata. Acrinathrin, bifenthrin, carbosulfan, and fenpropathrin caused high acute toxicity and were considered harmful (mortality >77%) to T. radiata. Abamectin, diflubenzuron, etoxazole, fenbutatin oxide, fenpyroximate, flufenoxuron, hexythiazox, propargite, spirodiclofen, and sulfur caused low acute toxicity and affected the parasitism rate and emergence rate of adults (F1 generation), and were considered slightly harmful to T. radiata. Dicofol and pyridaben did not affect the survival and action of the ectoparasitoid, and were considered harmless. In addition to its acute toxicity, carbosulfan caused mortality higher than 25% for >30 d after application, and was considered persistent. Acrinathrin, bifenthrin, fenpropathrin, fenpyroximate, propargite, and sulfur caused mortalities over 25% until 24 d after application and were considered moderately persistent; abamectin was slightly persistent, and fenbutatin oxide was short lived. Our results suggest that most acaricides used to control pest mites in citrus affect the density and efficacy of T. radiata in the biological control of D. citri. However, further evaluations are needed in order to determine the effect of these products on this ectoparasitoid under field conditions. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  1. Ecosystem carbon stocks in Pinus palustris forests

    Science.gov (United States)

    Lisa Samuelson; Tom Stokes; John R. Butnor; Kurt H. Johnsen; Carlos A. Gonzalez-Benecke; Pete Anderson; Jason Jackson; Lorenzo Ferrari; Tim A. Martin; Wendell P. Cropper

    2014-01-01

    Longleaf pine (Pinus palustris Mill.) restoration in the southeastern United States offers opportunities for carbon (C) sequestration. Ecosystem C stocks are not well understood in longleaf pine forests, which are typically of low density and maintained by prescribed fire. The objectives of this research were to develop allometric equations for...

  2. The extractives of Pinus pinaster wood

    Science.gov (United States)

    Richard W. Hemingway; W. E. Hillis; L. S. Lau

    1973-01-01

    The extractives in Pinus pinaster wood grown in South Australia were examined as part of an assessment of the suitability of this wood for manufacture of absorbent tissues from bisulphite pulps. The average petroleum solubility of the wood was 2.0% but the amount and composition of the petroleum extract varied widely depending upon the age of the...

  3. Silvical characteristics of pitch pine (Pinus rigida)

    Science.gov (United States)

    S. Little

    1959-01-01

    Pitch pine (Pinus rigida Mill.) grows over a wide geographical range - from central Maine to New York and extreme southeastern Ontario, south to Virginia and southern Ohio, and in the mountains to eastern Tennessee, northern Georgia, and western South Carolina. Because it grows mostly on the poorer soils, its distribution is spotty.

  4. Long term contracts signed in Slovak timber business

    International Nuclear Information System (INIS)

    Haluza, I.

    2005-01-01

    The Slovak timber business is changing. The state-owned company, SR Forests, which cuts more then 50% of Slovak timber has signed long term agreements with major domestic timber processing companies - Smrecina, the Rettenmeier Tatra Timber saw mill in Liptovsky Mikulas and two paper mills - Mondi SCP Ruzomberok and Kappa Sturovo. In the past, only quarterly contracts were signed. Now, for the first time, two-year contracts have been signed that should help the timber processing industry and the forestry sector. The General Director of Lesy SR (SR Forests), Karol Vins, hopes for better sale prices. Company headquarters wants to maintain better control of prices than under the old system of timber sales by its branches. In the opinion of the General Director of the Forestry Section at the Ministry of Agriculture, long term contracts will guarantee a stable delivery of timber to processing companies, giving investors in new production capacity a better position in negotiations with banks regarding financing. According to K. Vins, long term contracts have so far only been negotiated with major timber processing companies which are mostly controlled by foreign capital and therefore have good payment discipline. The Association of the Timber Processing Industry is unhappy regarding developments and Lesy SR has not invited domestic companies to these negotiations

  5. Seismic retrofitting of timber framed walls

    Directory of Open Access Journals (Sweden)

    Gonçalves, A. M.

    2014-12-01

    Full Text Available After the 1755 earthquake that destroyed Lisbon, an innovative anti-seismic structural system was developed consisting of a timber skeleton, that included timber framed masonry walls. After more than 250 years these structures need rehabilitation to face the present demands. The research presented in this paper aimed at experimentally characterizing the cyclic behaviour of timber framed walls reinforced with three different methods, namely: (i elastic-plastic dampers on diagonal braces, (ii reinforcement of timber connections with steel plates, (iii application of a reinforced rendering. The elastic-plastic damper showed an unsymmetrical behaviour and some difficulties to implement in practice. The strengthening with reinforced render led to an initial stiffness increase but showed a limited deformation capacity. The walls with reinforcing steel plates at the timber connections showed the best behaviour in terms of strength, stiffness and energy dissipation.Después del terremoto de 1755 que destruyó Lisboa, un sistema estructural antisísmico muy innovador fue desarrollado. El sistema consistió en un esqueleto de madera, que incluyó la construcción de muros de mampostería con un entramado de madera. Transcurridos más de 250 años, estas estructuras necesitan rehabilitación para poder hacer frente a los requisitos estructurales actuales. La investigación presentada en este trabajo tiene como objetivo caracterizar experimentalmente el comportamiento cíclico de los muros con entramado de madera reforzados con tres métodos diferentes: (i amortiguadores elasto-plásticos, (ii refuerzo de las conexiones de madera con placas de acero, (iii aplicación de un mortero reforzado. El amortiguador elasto-plástico mostró un comportamiento asimétrico y algunas dificultades para aplicarlo en la práctica. El refuerzo con mortero reforzado condujo a un aumento de la rigidez inicial, pero reveló una capacidad de deformación limitada. Los muros con

  6. Oviposition behavior and survival of Tamarixia radiata (Hymenoptera: Eulophidae), an ectoparasitoid of the Asian citrus psyllid, Diaphorina citri (Hemiptera: Liviidae), on hosts exposed to an entomopathogenic fungus

    Science.gov (United States)

    Antagonistic interactions between the nymphal parasitoid, Tamarixia radiata Waterston (Hymenoptera: Eulophidae), and the ARSEF 3581 isolate of the entomopathogenic fungus, Isaria fumosorosea Wize (Hypocreales: Cordycipitaceae) could disrupt biological control of the Asian citrus psyllid, Diaphorina ...

  7. Conserved Epigenetic Mechanisms Could Play a Key Role in Regulation of Photosynthesis and Development-Related Genes during Needle Development of Pinus radiata.

    Science.gov (United States)

    Valledor, Luis; Pascual, Jesús; Meijón, Mónica; Escandón, Mónica; Cañal, María Jesús

    2015-01-01

    Needle maturation is a complex process that involves cell growth, differentiation and tissue remodelling towards the acquisition of full physiological competence. Leaf induction mechanisms are well known; however, those underlying the acquisition of physiological competence are still poorly understood, especially in conifers. We studied the specific epigenetic regulation of genes defining organ function (PrRBCS and PrRBCA) and competence and stress response (PrCSDP2 and PrSHMT4) during three stages of needle development and one de-differentiated control. Gene-specific changes in DNA methylation and histone were analysed by bisulfite sequencing and chromatin immunoprecipitation (ChIP). The expression of PrRBCA and PrRBCS increased during needle maturation and was associated with the progressive loss of H3K9me3, H3K27me3 and the increase in AcH4. The maturation-related silencing of PrSHMT4 was correlated with increased H3K9me3 levels, and the repression of PrCSDP2, to the interplay between AcH4, H3K27me3, H3K9me3 and specific DNA methylation. The employ of HAT and HDAC inhibitors led to a further determination of the role of histone acetylation in the regulation of our target genes. The integration of these results with high-throughput analyses in Arabidopsis thaliana and Populus trichocarpa suggests that the specific epigenetic mechanisms that regulate photosynthetic genes are conserved between the analysed species.

  8. Conserved Epigenetic Mechanisms Could Play a Key Role in Regulation of Photosynthesis and Development-Related Genes during Needle Development of Pinus radiata.

    Directory of Open Access Journals (Sweden)

    Luis Valledor

    Full Text Available Needle maturation is a complex process that involves cell growth, differentiation and tissue remodelling towards the acquisition of full physiological competence. Leaf induction mechanisms are well known; however, those underlying the acquisition of physiological competence are still poorly understood, especially in conifers. We studied the specific epigenetic regulation of genes defining organ function (PrRBCS and PrRBCA and competence and stress response (PrCSDP2 and PrSHMT4 during three stages of needle development and one de-differentiated control. Gene-specific changes in DNA methylation and histone were analysed by bisulfite sequencing and chromatin immunoprecipitation (ChIP. The expression of PrRBCA and PrRBCS increased during needle maturation and was associated with the progressive loss of H3K9me3, H3K27me3 and the increase in AcH4. The maturation-related silencing of PrSHMT4 was correlated with increased H3K9me3 levels, and the repression of PrCSDP2, to the interplay between AcH4, H3K27me3, H3K9me3 and specific DNA methylation. The employ of HAT and HDAC inhibitors led to a further determination of the role of histone acetylation in the regulation of our target genes. The integration of these results with high-throughput analyses in Arabidopsis thaliana and Populus trichocarpa suggests that the specific epigenetic mechanisms that regulate photosynthetic genes are conserved between the analysed species.

  9. Variations in DNA methylation, acetylated histone H4, and methylated histone H3 during Pinus radiata needle maturation in relation to the loss of in vitro organogenic capability.

    Science.gov (United States)

    Valledor, Luis; Meijón, Mónica; Hasbún, Rodrigo; Jesús Cañal, Maria; Rodríguez, Roberto

    2010-03-15

    Needle differentiation is a very complex process associated with the formation of a mature photosynthetic organ. From meristem differentiation to leaf maturation, gene control must play an important role switching required genes on and off to define tissue functions, with the epigenetic code being one of the main regulation mechanisms. In this work, we examined the connections between the variation in the levels of some epigenetic players (DNA methylation, acetylated histone H4 and histone H3 methylation at Lys 4 and Lys 9) at work during needle maturation. Our results indicate that needle maturation, which is associated with a decrease in organogenic capability, is related to an increase in heterochromatin-related epigenetic markers (high DNA methylation and low acetylated histone H4 levels, and the presence of histone H3 methylated at lys 9). Immunohistochemical analyses also showed that the DNA methylation of palisade parenchyma cell layers during the transition from immature to mature scions is associated with the loss of the capacity to induce adventitious organs. Copyright 2009 Elsevier GmbH. All rights reserved.

  10. Deslignificación de pasta kraft de Pinus radiata con una levadura genéticamente modificada para producir lacasa

    OpenAIRE

    Arana-Cuenca, A.; Yagüe, Susana; Fermiñán, Encarnación

    2010-01-01

    Una posible aplicación biotecnológica de las lacasas fúngicas es el blanqueo de pasta de papel mediante la degradación de la lignina en la pasta cruda. Para ello es necesaria su producción a bajo coste y a concentraciones superiores a las secretadas por los hongos de forma natural. La expresión heteróloga en levaduras es una alternativa para su producción a mayor escala. En el presente trabajo se ha realizado la expresión heteróloga del gen cglcc1, responsable de la producción de lacasa en el...

  11. Whole-tree sap flow responses to soil water and weather variables for Pinus radiata and three indigenous species in a southern afrotemperate forest region

    CSIR Research Space (South Africa)

    Mapeto, T

    2018-03-01

    Full Text Available –plant–atmosphere continuum and facilitate the development of rapid estimation techniques through extrapolation. To quantify and characterise the influence of local environmental conditions on single-tree water use, whole-tree daily sap flow for three indigenous afrotemperate...

  12. Cadmium and copper change root growth and morphology of Pinus pinea and Pinus pinaster seedlings

    Energy Technology Data Exchange (ETDEWEB)

    Arduini, I.; Onnis, A. (Dipart. di Agronomia e Gestione dell' Agro-Ecosistema, Univ. degli Studi Pisa, Pisa (Italy)); Boldbold, D.L. (Forstbotanishces Institut, Univ. Goettingen, Goettingen (Germany))

    1994-01-01

    Heavy metal loads in forest soils have been increasing over time due to atmospheric inputs. Accumulation in the upper soil layers could affect establishment of seedlings and forest regeneration. Mediterranean species show a high initial root development, allowing seedlings to reach the moisture of deeper soil layers. In the present work seedlings of stone pine (Pinus pinea L.) and maritime pine (Pinus pinaster Ait.), were grown in culture solution supplied with 0.0, 0.1, 1 or 5 [mu]M CdSO[sub 4] or with 1 [mu]M CdSO[sub 4] and 1 [mu]M CuSO[sub 4] combined. In both species tap-root elongation was drastically reduced in the 5 [mu]M Cd[sup 2+] and in the (Cd[sup 2+] - Cu[sup 2+]) treatments. A supply of 0.1 or 1 [mu]M Cd[sup 2+] however, enhanced root elongation in Pinus pinea without significantly influencing root elongation in Pinus pinaster. In both species the root density (weight per unit length) and the width of the cortex increased in response to Cd[sup 2+] exposure. In Pinus pinaster the mitotic index decreased at the higher Cd[sup 2+] concentrations and when Cd[sup 2+] and Cu[sup 2+] were combined. The data suggest that cell elongation is more sensitive to Cd[sup 2+] than cell division. The number and length of the lateral roots were also affected by Cd[sup 2+] treatment to a higher degree in Pinus pinaster than in Pinus pinea, reflecting the different Cd-tolerance of the two species. (au)

  13. Utilization of Diamine Oxidase Enzyme from Mung Bean Sprouts (Vigna radiata L) for Histamine biosensors

    Science.gov (United States)

    Karim, Abdul; Wahab, A. W.; Raya, I.; Natsir, H.; Arif, A. R.

    2018-03-01

    This research is aimed to utilize the diamine oxidase enzyme (DAO) which isolated from mung bean sprouts (Vigna radiata L) to develop histamine biosensors based on electode enzyme with the amperometric method (cyclic voltammetry).The DAO enzyme is trapped inside the membrane of chitin-cellulose acetate 2:1 and glutaraldehyde which super imposed on a Pt electrode. Histamine will be oxidized by DAO enzyme to produce aldehydes and H2O2 that acting as electron transfer mediators.The performance of biosensors will be measured at various concentrations of glutaraldehyde, temperature changes and different range of pH. Recently, it has been found that the optimal conditions obtained from the paramaters as follows; at 25% of glutaraldehyde, temperature of 37°C and pH of 7.4. Eventually, the results provided an expectation for applying histamine biosensors in determining the freshness and safety of fish specifically skombroidae families.

  14. Yield and Quality of Mung Bean (Vigna radiata (l. R. Wilczek Seeds Produced in Poland

    Directory of Open Access Journals (Sweden)

    Kamil MISIAK

    2017-11-01

    Full Text Available The aim of the experiment was to do field and laboratory assessments of yield and quality of mung bean (Vigna radiata (L. R. Wilczek seeds cultivated in Western Poland. Mean yield of seeds per plant was higher for common bean (Phaseolus vulgaris L. than for mung one: 13.1 g and 2.58 g, respectively. The mean 1000 mung seeds weight was 50.9 g and their germination – 78 %. Germination capacities of seeds of both beans in the field were similar. Mung beans, compared to common bean, had much smaller seeds, started to bloom later and produced mature seeds later than the latter. Mung bean seeds had more total proteins and Magnesium and Copper than common bean seeds. In Western Poland, production of high quality mung bean seeds was possible.

  15. Appropriateness of Probit-9 in development of quarantine treatments for timber and timber commodities

    Science.gov (United States)

    Marcus Schortemeyer; Ken Thomas; Robert A. Haack; Adnan Uzunovic; Kelli Hoover; Jack A. Simpson; Cheryl A. Grgurinovic

    2011-01-01

    Following the increasing international phasing out of methyl bromide for quarantine purposes, the development of alternative treatments for timber pests becomes imperative. The international accreditation of new quarantine treatments requires verification standards that give confidence in the effectiveness of a treatment. Probit-9 mortality is a standard for treatment...

  16. North Dakota timber industry: an assessment of timber product output and use, 2009

    Science.gov (United States)

    David E. Haugen; Robert A. Harsel

    2013-01-01

    Presents recent North Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  17. South Dakota timber industry: an assessment of timber product output and use, 2009

    Science.gov (United States)

    Ronald J. Piva; Gregory J. Josten

    2013-01-01

    Presents recent South Dakota forest industry trends; production and receipts of industrial roundwood; and production of saw logs, veneer logs, pulpwood, and other products in 2009. Logging residue generated from timber harvest operations is reported, as well as wood and bark residue generated at primary wood-using mills and disposition of mill residues.

  18. Wisconsin timber industry--an assessment of timber product output and use, 1988.

    Science.gov (United States)

    W. Brad Smith; James W. Whipple

    1990-01-01

    Discusses recent Wisconsin forest industry trends; production and receipts of pulpwood, saw logs, and veneer logs; and production of other timber products in 1988. Reports on logging residue, on wood and bark residue generated at primary wood-using mills, and on disposition of this mill residue.

  19. Tensile properties of machine strength graded timber for glued laminated timber

    DEFF Research Database (Denmark)

    Boström, Lars; Hoffmeyer, Preben; Solli, Kjell-Helge

    1999-01-01

    Special setting values based on tensile properties of Norway spruce are established for four different strength grading machines. The machines included are Computermatic, Cook-Bolinder, Ersson and Dynagrade.The study shows that the yield of timber to be used in tension, such as laminations...

  20. Biogenic synthesis and spatial distribution of silver nanoparticles in the legume mungbean plant (Vigna radiata L.).

    Science.gov (United States)

    Kumari, Rima; Singh, Jay Shankar; Singh, Devendra Pratap

    2017-01-01

    The present investigation aimed to study the in vivo synthesis of silver nanoparticles (AgNPs) in the legume Vigna radiata. The level of plant metabolites such as total phenolics, lipid, terpenoids, alkaloids and amino acid increased by 65%, 133%, 19%, 67% and 35%, respectively, in AgNO 3 (100 mg L -1 ) treated plants compared to control. Whereas protein and sugar contents in the treated plants were reduced by 38% and 27%, respectively. FTIR analysis of AgNO 3 (20-100 mg L -1 ) treated plants exhibited changes in the IR regions between 3297 and 3363 cm -1 , 1635-1619 cm -1 , 1249-1266 cm -1 and that corresponded to alterations in OH groups of carbohydrates, OH and NH groups of amide I and II regions of protein, when compared with the control. Transmission electron micrographs showed the spatial distribution of AgNPs in the chloroplast, cytoplasmic spaces, vacuolar and nucleolar plant regions. Metal quantification in different tissues of plants exposed to 20-100 mg L -1 AgNO 3 showed about a 22 fold accumulation of Ag in roots as compared to shoots. The phytotoxic parameters such as percent seed germination and shoot elongation remained almost unaltered at low AgNO 3 doses (20-50 mg L -1 ). However, at higher levels of exposure (100 mg L -1 ), the percent seed germination as well as root and shoot elongation exhibited concentration dependent decline. In conclusion, synthesis of AgNPs in V. radiata particularly at lower doses of AgNO 3 , could be used as a sustainable and environmentally safe technology for large scale production of metal nanoparticles. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  1. Anatomical aspects of the male reproductive system in the bonnet monkey (Macaca radiata).

    Science.gov (United States)

    Prakash, S; Suresh, S; Prithiviraj, E

    2009-04-01

    The normal anatomy of the male reproductive system in Macaca radiata is presented here. The external genitalia consist of a triangular button-shaped glans penis. The corpus cavernosum, and spongiosum form the vascular component of the penis and the baculum or os penis forms the non-vascular erectile component. The baculum is one of the longest in the genus macaques. The scrotal sac is non-pigmented, slightly pendulous, with scattered hairs, faintly corrugated, and does not reach the ischial callosities in the sitting posture. The testicles are ovoid in shape without appendix. Right and left testicular arteries originate at the level of the inter-vertebral disc between T12-L1 and L2-L3, respectively. Seminiferous tubules present mixed stages of spermatogenesis, i.e. single/multistage. The epididymis is crescent shaped, attached to the postero-lateral border of the testis without an appendix. Light microscopic observation revealed a characteristic high columnar epithelium with stereocilia. Clear cells or light cells are seen in the caudal region. The ductus deferens display a lumen lined by pseudo-stratified columnar epithelium separated by concentric layers of smooth muscle cells covered by serosa. The seminal vesicles are pyramidal in shape, prominently projecting above the urinary bladder, and are the largest of the accessory glands, typical of polyandrous primate genera. The prostate is conical in shape. Its base is in contact with the trigone of the bladder. Its posterior surface shows a transverse cleft separating an upper quarter, the cranial lobe, from the lower three-quarters of the gland. Compared with other macaques there are many distinguishing features in M. radiata. Excellent adaptability and spermatogenic efficiency in the laboratory environment makes this animal a good primate model for andrological research.

  2. Lethal and Sublethal Effects of Insecticides Used on Citrus, on the Ectoparasitoid Tamarixia radiata.

    Science.gov (United States)

    Beloti, Vitor Hugo; Alves, Gustavo Rodrigues; Araújo, Diogo Feliciano Dias; Picoli, Mateus Manara; Moral, Rafael de Andrade; Demétrio, Clarice Garcia Borges; Yamamoto, Pedro Takao

    2015-01-01

    Huanglongbing (HLB) is a disease associated with the bacteria "Candidatus Liberibacter spp." and has been devastating citrus orchards around the world. Its management involves control of the insect vector, the Asian citrus psyllid Diaphorina citri Kuwayama. However, the indiscriminate use of chemicals has caused pest outbreaks and eliminated the natural enemies of the vector, such as the parasitoid Tamarixia radiata (Waterston), the main agent for biological control of D. citri. This study assessed the lethal and sublethal effects of insecticides recommended for integrated production of citrus on the parasitoid T. radiata. When adult parasitoids were exposed to residues of 25 insecticides, 20% of them, i.e., gamma-cyhalothrin, etofenprox, azadirachtin, tebufenozide and pyriproxyfen, were considered as harmless (Class 1), 12% as slightly harmful (Class 2), 12% as moderately harmful (Class 3) and 56% as harmful (Class 4), according to the classification proposed by the IOBC/WPRS. Afterward, 14 insecticides (5 harmless and 9 harmful) were sprayed on the parasitoid pupae. Of the 14 insecticides tested, only the organophosphates dimethoate and chlorpyrifos affected the parasitoid emergence. The effects of insecticides on the parasitism capacity of adults exposed to residues of azadirachtin, etofenprox, gamma-cyhalothrin, pyriproxyfen and tebufenozide (harmless) were also evaluated. Tebufenozide and gamma-cyhalothrin affected the parasitism of the F0 generation, but did not affect the emergence of the F1 and F2 generations. Therefore, for an effective IPM program, selective insecticides or harmful pesticides to adult parasitoids could be used in the field, provided that the adults do not occur naturally and the chemical applications do not coincide with parasitoid releases.

  3. Lethal and Sublethal Effects of Insecticides Used on Citrus, on the Ectoparasitoid Tamarixia radiata.

    Directory of Open Access Journals (Sweden)

    Vitor Hugo Beloti

    Full Text Available Huanglongbing (HLB is a disease associated with the bacteria "Candidatus Liberibacter spp." and has been devastating citrus orchards around the world. Its management involves control of the insect vector, the Asian citrus psyllid Diaphorina citri Kuwayama. However, the indiscriminate use of chemicals has caused pest outbreaks and eliminated the natural enemies of the vector, such as the parasitoid Tamarixia radiata (Waterston, the main agent for biological control of D. citri. This study assessed the lethal and sublethal effects of insecticides recommended for integrated production of citrus on the parasitoid T. radiata. When adult parasitoids were exposed to residues of 25 insecticides, 20% of them, i.e., gamma-cyhalothrin, etofenprox, azadirachtin, tebufenozide and pyriproxyfen, were considered as harmless (Class 1, 12% as slightly harmful (Class 2, 12% as moderately harmful (Class 3 and 56% as harmful (Class 4, according to the classification proposed by the IOBC/WPRS. Afterward, 14 insecticides (5 harmless and 9 harmful were sprayed on the parasitoid pupae. Of the 14 insecticides tested, only the organophosphates dimethoate and chlorpyrifos affected the parasitoid emergence. The effects of insecticides on the parasitism capacity of adults exposed to residues of azadirachtin, etofenprox, gamma-cyhalothrin, pyriproxyfen and tebufenozide (harmless were also evaluated. Tebufenozide and gamma-cyhalothrin affected the parasitism of the F0 generation, but did not affect the emergence of the F1 and F2 generations. Therefore, for an effective IPM program, selective insecticides or harmful pesticides to adult parasitoids could be used in the field, provided that the adults do not occur naturally and the chemical applications do not coincide with parasitoid releases.

  4. Assessment of demand and supply of timber products in Benue ...

    African Journals Online (AJOL)

    This study examines demand and supply of timber products in Benue State Nigeria with a view to highlighting the responsiveness of forest policy implementation. The scope of the study lies on plantation establishment targets and costs for 1999 to 2003, actual plantation establishment, timber supply and demand from ...

  5. Cattle and elk responses to intensive timber harvest.

    Science.gov (United States)

    Michael J. Wisdom; Bruce K. Johnson; Martin Vavra; Jennifer M. Boyd; Priscilla K. Coe; John G. Kie; Alan A. Ager; Norman J. Cimon

    2004-01-01

    Forested habitats for cattle and elk (Cervus elaphus) in the western United States have changed substantially in response to intensive timber management during the latter half of the 20th century. Consequently, the subject of how elk and other ungulates respond to timber management is a high-profile, long-standing issue that continues to be studied...

  6. Field investigations of historic covered timber bridges in the USA

    Science.gov (United States)

    James Wacker; Travis Hosteng; Brent. Phares

    2012-01-01

    The Federal Highway Administration is sponsoring a comprehensive research program on Historic Covered Timber Bridges in the USA. This national program's main purpose is to develop improved methods to preserve, rehabililate, and restore the timber bridge trusses that were developed during the early 1800s, and in many cases are still in service today. The overall...

  7. The Dendrochronological Dating of Timber Crossings in West Jutland, Denmark

    DEFF Research Database (Denmark)

    Daly, Aoife

    2006-01-01

    The dendrochronological analyses of a large number of timbers from two sites are described. Nybro causeway in west Jutland, Denmark, which was built in the 8th century AD, consists of numerous phases, identifiable due to the large number of dendrochronologically dated timbers, of which many had...

  8. Influence Of Density On The Durabilities Of Three Ghanaian Timbers ...

    African Journals Online (AJOL)

    Review of factors influencing wood durability shows although density varies depending on trunk position, its role appears controversial for many timber species. Thus, for the first time, the influence of density on the durability of three Ghanaian timbers (Nauclea diderrichii (de Wild.) Merr., Nesogordonia papaverifera (A. Chev ...

  9. Lateral testing of glued laminated timber tudor arch

    Science.gov (United States)

    Douglas R. Rammer; Philip Line

    2016-01-01

    Glued laminated timber Tudor arches have been in wide use in the United States since the 1930s, but detailed knowledge related to seismic design in modern U.S. building codes is lacking. FEMA P-695 (P-695) is a methodology to determine seismic performance factors for a seismic force resisting system. A limited P-695 study for glued laminated timber arch structures...

  10. Timber Management Opportunities for Nebraska 1983-1992

    Science.gov (United States)

    W. Brad Smith; Tom D. Wardle

    1984-01-01

    Reviews opportunities for treatment of timber stands in Nebraska for the decade 1983 - 1992. Under the assumptions and management guides specified, 52 percent of Nebraska''s commercial forest land would benefit from timber harvest or some other form of treatment during the decade.

  11. Projecting national forest inventories for the 2000 RPA timber assessment.

    Science.gov (United States)

    John R. Mills; Xiaoping. Zhou

    2003-01-01

    National forest inventories were projected in a study that was part of the 2000 USDA Forest Service Resource Planning Act (RPA) timber assessment. This paper includes an overview of the status and structure of timber inventory of the National Forest System and presents 50-year projections under several scenarios. To examine a range of possible outcomes, results are...

  12. Comparative durability of timber bridges in the USA

    Science.gov (United States)

    James P. Wacker; Brian K. Brashaw

    2017-01-01

    As engineers begin to utilize life-cycle-cost design approaches for timber bridges, there is a necessity for more reliable data about their durability and expected service life. This paper summarizes a comprehensive effort to assess the current condition of more than one hundred timber highway bridge superstructures throughout the United States. This national study was...

  13. 125 Timber Dealers' Perception of their Knowledge of the Forest ...

    African Journals Online (AJOL)

    Nekky Umera

    Abstract. This study investigated timber dealers' knowledge of the forest law and regulations in Uyo Senatorial District. Five timber markets were selected through two-stage sampling. Data were collected from 238 traders in the selected markets using structured questionnaires and subjected to descriptive and inferential ...

  14. Whole tree transportation system for timber processing depots

    Science.gov (United States)

    John Lancaster; Tom Gallagher; Tim  McDonald; Dana Mitchell

    2016-01-01

    The growing demand for alternative energy has led those who are interested in producing sustainable energy from renewable timber to devise new concepts to satisfy those demands. The concept of timber processing depots, where whole stem trees will be delivered for future processing into wood products and high quality energy fuel, has led to the re-evaluation of our...

  15. Infill Panels and the tube connection in timber frames

    NARCIS (Netherlands)

    Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.

    2012-01-01

    In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

  16. Lateral Stiffness of Timber Frames with CLT Infill Panels

    NARCIS (Netherlands)

    Leijten, A.J.M.; Jorissen, A.J.M.; Hoenderkamp, J.C.D.; Haddad, Y.M.

    2011-01-01

    In recent years timber infill panels have been proposed for multi-story column-beam frame structures with the aim to substitute the stabilizing function of column-beam moment connections. The preliminary study reported in this paper considers a column-beam timber frame where stability is assured by

  17. Non-timber forest products and forest stewardship plans

    Science.gov (United States)

    Becky Barlow; Tanner Filyaw; Sarah W. Workman

    2015-01-01

    To many woodland owners “harvesting” typically means the removal of timber from forests. In recent years many landowners have become aware of the role non-timber forest products (NTFPs) can play in supplemental management strategies to produce income while preserving other forest qualities. NTFPs are a diverse group of craft, culinary, and medicinal products that have...

  18. Feasibility Investigation into Strengthening of Timber Bridge Stringers

    Science.gov (United States)

    2007-05-01

    12 Studies on timber members recycled from old timber structures...55 Figure 63. The load cell-hydraulic ram setup with spreader beam.....................................................56 Figure 64. The MTS...actuator and spreader beam................................................................................56 Figure 65. Effectiveness of a repair method

  19. Alaska's timber harvest and forest products industry, 2005

    Science.gov (United States)

    Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

    2009-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

  20. Alaska’s timber harvest and forest products industry, 2011

    Science.gov (United States)

    Erik C. Berg; Charles B. Gale; Todd A. Morgan; Allen M. Brackley; Charles E. Keegan; Susan J. Alexander; Glenn A. Christensen; Chelsea P. McIver; Micah G. Scudder

    2014-01-01

    This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, export, sales of primary wood products,...

  1. Vigna radiata

    Indian Academy of Sciences (India)

    Table 2. Cluster mean for different traits. Characters/ Days to 50% Days to Plant height Plant yield. 100-seed. Pods per Pods per Pod length Seeds per clusters flowering maturity. (cm). (gm) weight (gm) plant cluster. (cm) pod. Cluster I. 34.00. 6.20. 29.64. 4.89. 4.71. 13.15. 3.29. 6.69. 8.74. Cluster II. 35.17. 61.00. 31.29. 5.26.

  2. PROCEDIMENTOS DE CONTROLE DO VOLUME DE MADEIRA ESTIMADO E COLHIDO EM UM PLANTIO DE Pinus spp. NO PARANÁ

    Directory of Open Access Journals (Sweden)

    Silvane Vatraz

    2014-01-01

    Full Text Available The objective of this research was to improve the operating procedures of control of the volume of timber estimated by the forest inventory and the effectively harvested volume in order to reduce inconsistencies in the forest planning practiced in a forestry plantation of Pinus spp. in Paraná state. Accordingly, we used the tools of quality: storming and PDCA Cycle through an exploratory research project to study together. The study showed an inconsistency initial volume – 24,73% of the volume estimated by the inventory and the effectively harvested wood. This inconsistency was composed of operational failures in the activities of Forest Inventory (+13,84%, Forest Harvesting (+15,62% and Expedition Wood (-3,08%. The application of quality tools helped in the identification of inconsistency, as well as the revelation of operational failures, which suggested some routine monitoring and checking each of the activities involved in managing operational forestry.

  3. [Comparison of chemical components of essential oils in needles of Pinus massoniana Lamb and Pinus elliottottii Engelm from Guangxi].

    Science.gov (United States)

    Shen, Changmao; Duan, Wengui; Cen, Bo; Tan, Jianhui

    2006-11-01

    Essential oils were extracted by steam distillation from the needles of Pinus massoniana Lamb and Pinus elliottottii Engelm grown in Guangxi. Various factors such as pine needle dosage and extraction time which may influence the oil yield were investigated. The optimum conditions were found to be as follows: pine needle dosage 700 g, extraction time 5 h. The essential oil yields from the needles of Pinus massoniana Lamb and Pinus elliottottii Engelm were 0.45% and 0.19%, respectively. Moreover, the chemical compositions of the essential oils were analyzed by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS). Sixty four components in the essential oil from needle of Pinus massoniana Lamb were separated and twenty of them (98.59%) were identified while seventy three components in the essential oil from needle of Pinus elliottottii Engelm were separated and twenty nine of them (94.23%) were identified. Generally, the compositions of the essential oils from needles of the two varieties were similar but the contents of some compounds differed greatly. Especially, the content of alpha-pinene in the essential oils from Pinus massoniana Lamb needles was 2.6 times as that from Pinus elliottottii Engelm needles, but the content of beta-pinene was less than the latter. Mono- and sesquiterpenes were the main composition of the essential oils from Pinus massoniana Lamb and Pinus elliottottii Engelm needles.

  4. RILEM International Symposium on Materials and Joints in Timber Structures

    CERN Document Server

    Reinhardt, H-W; Garrecht, Harald

    2014-01-01

    This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended o...

  5. On several parameters of mechanized timbering for working faces

    Energy Technology Data Exchange (ETDEWEB)

    Klorik' yan, S Kh

    1979-08-01

    Opinion is expressed that the two basic parameters characterizing mechanical timbers, the specific force in ton-forces per square meter of the supported roof surface over the working area and the one-meter length of installed timbering, do not permit selection of the optimum type of timber for a roof of the corresponding class. Experience has demonstrated that the most precise parameter is specific strength of the timber in ton-forces per meter and the determined ratio of the strength of all posts in a section to spacing of the section along the longwall. Also an operating width not exceeding 0.4 meter should serve as a criterion for using timbers on unstable hanging walls. (In Russian)

  6. Comparative mapping in Pinus: sugar pine (Pinus lambertiana Dougl.) and loblolly pine (Pinus taeda L.).Tree Genet Genomes 7:457-468

    Science.gov (United States)

    Kathleen D. Jermstad; Andrew J. Eckert; Jill L. Wegrzyn; Annette Delfino-Mix; Dean A Davis; Deems C. Burton; David B. Neale

    2011-01-01

    The majority of genomic research in conifers has been conducted in the Pinus subgenus Pinus mostly due to the high economic importance of the species within this taxon. Genetic maps have been constructed for several of these pines and comparative mapping analyses have consistently revealed notable synteny. In contrast,...

  7. Modeling natural regeneration biomass of Pinus stand

    Directory of Open Access Journals (Sweden)

    Rafael Cubas

    2016-09-01

    Full Text Available Reliable biomass data are very important in the evaluation of ecosystems, and help in understanding the contribution of forests in climate change. Variables that describe the size of the tree, like diameter and height are directly associated with biomass, which allows the use of regression models to estimate this element. Therefore, this study aimed to estimate by regression models, the biomass of different compartments of natural regeneration of trees of a Pinus taeda L. stand. The data were obtained through direct destructive method, using 100 randomly selected trees in the understory of a stand of Pinus taeda. We analyzed three arithmetical models, three logarithmic and two models developed by Stepwise process. Logarithmic equations developed by Stepwise procedure showed the best estimates of total and stems biomass. However, for needles and twigs compartments the best adjust was observed with Husch model and for root biomass Berkhout model proved to be the most suitable.

  8. Effects of Timber Harvesting with Best Management Practices on Ecosystem Metabolism of a Low Gradient Stream on the United States Gulf Coastal Plain

    Directory of Open Access Journals (Sweden)

    Abram DaSilva

    2013-06-01

    Full Text Available Stream metabolism can be used as a measure of freshwater ecosystem health because of its responsiveness to natural and anthropogenic changes. In this study, we used stream metabolic rates to test for the effects of a timber harvest with Louisiana’s current best management practices (BMPs. The study was conducted from 2006 to 2010 in a loblolly pine (Pinus taeda stand in north-central Louisiana, USA, 45 ha of which was clear cut harvested in the summer of 2007. Dissolved oxygen (DO, water temperature, and stream depth were recorded at a site upstream (serving as a reference and a site downstream of the harvested area. Using diurnal DO change and an open-system, single-station method at each site, we quantified rates of net ecosystem productivity (NEP, gross primary productivity (GPP, community respiration (CR, and the GPP/CR ratio. The system was predominately heterotrophic, with a GPP/CR ratio of less than one for 82% of the time at the upstream site. No calculated metabolic rate was significantly changed by the timber harvest (two-way ANOVA with interaction; p < 0.001. Overall, the results suggest that timber harvests of similar intensity with Louisiana’s current BMPs may not significantly impact stream biological conditions.

  9. Foliar fungi of Scots pine (Pinus sylvestris)

    OpenAIRE

    Millberg, Hanna

    2015-01-01

    Scots pine (Pinus sylvestris) is an ecologically and economically important tree species in Fennoscandia. Scots pine needles host a variety of fungi, some with the potential to profoundly influence their host. These fungi can have beneficial or detrimental effects with important implications for both forest health and primary production. In this thesis, the foliar fungi of Scots pine needles were investigated with the aim of exploring spatial and temporal patterns, and development with needle...

  10. Moisture Content Monitoring of a Timber Footbridge

    Directory of Open Access Journals (Sweden)

    Niclas Björngrim

    2016-03-01

    Full Text Available Construction of modern timber bridges has greatly increased during the last 20 years in Sweden. Wood as a construction material has several advantageous properties, e.g., it is renewable, sustainable, and aesthetically pleasing, but it is also susceptible to deterioration. To protect wood from deterioration and ensure the service life, the wood is either treated or somehow covered. This work evaluates a technology to monitor the moisture content in wood constructions. Monitoring the moisture content is important both to verify the constructive protection and for finding areas with elevated levels of moisture which might lead to a microbiological attack of the wood. In this work, a timber bridge was studied. The structure was equipped with six wireless sensors that measured the moisture content of the wood and the relative humidity every hour. Data for 744 days of the bridge are presented in this paper. Results show that the technology used to monitor the bridge generally works; however, there were issues due to communication problems and malfunction of sensors. This technology is promising for monitoring the state of wood constructions, but a more reliable sensor technology is warranted continuous remote monitoring of wood bridges over long periods of time.

  11. La corona radiata de Helios-Sol como símbolo de poder en la Cultura Visual Romana

    Directory of Open Access Journals (Sweden)

    Jorge Tomás García

    2017-12-01

    Full Text Available El presente trabajo pretende analizar la presencia del motivo iconográfico de la corona radiata en la cultura visual romana como símbolo de poder. Para ello, analizaremos la figura mitológica de Helios, y sus múltiples variantes en las fuentes clásicas, especialmente aquellas que más la relacionan con la divinidad del Sol en el mundo romano. Las principales categorías de interpretación de la iconografía del Sol en la cultura visual romana enriquecen las variantes iconológicas de la presencia de la corona radiata. Así, pretendemos analizar la naturaleza real o simbólica de este atributo iconográfico tan presente desde la época de Augusto como símbolo de poder y luz ligado a la realía imperial. This article aims to analyze the presence of the iconographic motif of the corona radiata in the Roman visual culture as a symbol of power. For this, we will analyze the mythological figure of Helios, and its multiple variants in the classical sources, especially those that relate more to the divinity of the Sun in the Roman world. e main categories of interpretation of the Sun's iconography in the Roman visual culture enrich the iconological variants of the presence of the corona radiata. us, we intend to analyze the real or symbolic nature of this iconographic attribute so present since the time of Augustus as a symbol of power and light linked to the imperial realia.

  12. Contenido de carotenos en el follaje de Pinus caribaea Morelet y Pinus tropicalis Morelet

    Directory of Open Access Journals (Sweden)

    Rolando Quert Álvarez

    1997-08-01

    Full Text Available Se realizó un análisis del material vegetal de las especies Pinus caribaea Morelet y Pinus tropicalis Morelet, con el objetivo de determinar su contenido de caroteno tomando como base las condiciones y tiempo de exposición del follaje de las especies objeto de estudio al sol y a la sombra, y teniendo en cuenta la extracción del aceite esencias como factores influyentes en la variación de las concentraciones de caroteno. Para determinar el contenido de caroteno se tomaron muestras del follaje entre 1 y 20 d, expuesto a las condiciones de trabajo en intervalos de 1, 3, 6, 10 y 20 d, tanto antes como después de extraer el aceite esencial. Los resultados obtenidos para ambas especies demostraron que el follaje expuesto a la sombra contiene un mayor porcentaje de caroteno que el expuesto al sol, como era de esperar; el tiempo de exposición influye significativamente en este contenido, así como la extracción del aceite esencial que aumenta el contenido de caroteno; los valores máximos fueron de 130,7 y 157,2 mg/kg de follaje y los mínimos de 55,3 y 57,2 mg/kg de follaje para Pinus caribaea Morelet y Pinus tropicalis Morelet respectivamente.An analysis of the vegetable material from the species Pinus cariabaea Morelet and Pinus tropicalis Morelet was carried out and their content of carotene was determined taking as the basis the conditions and time of exposure of the foliage of the species studied to the sun and shade, and also taking into account the extraction of the essential oil as factors influencing on the variation of carotene concentrations. For the determination of the carotene content, samples of the foliage between 1 and 20 exposed to working conditions at intervals of 1, 3, 6, 10 and 20 d were taken, both before and after the extraction of the essential oil. Results obteined from both species showed that the foliage exposed to shade contains a higher percentage of carotene than the one exposed to the sun, as it was expected to

  13. Spatial ecology of timber rattlesnakes on the hardwood ecosystem experiment: pre-treatment results

    Science.gov (United States)

    Brian J. MacGowan; Zachary J. Walker

    2013-01-01

    The timber rattlesnake (Crotalus horridus) is a species of conservation concern throughout much of its geographic range and may serve as a sentinel species in investigations of the effects of timber harvesting on forest reptiles. Our objective was to determine the effect of even-aged timber management regimes on timber rattlesnake home range and...

  14. Electrodialytic removal of Cu, Cr, and As from chromated copper arsenate-treated timber waste

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, A.B.; Mateus, E.P.; Ottosen, L.M.; Bech-Nielsen, G.

    2000-03-01

    Waste of wood treated with chromated copper arsenate (CCA) is expected to increase in volume over the next decades. Alternative disposal options to landfilling are becoming more attractive to study, especially those that promote reuse. The authors have studied the electrodialytic removal of Cu, Cr, and As from CCA-treated timber wastes. The method uses a low-level direct current as the cleaning agent, combining the electrokinetic movement of ions in the matrix with the principle of electrodialysis. The technique was tested in four experiments using a laboratory cell on sawdust of an out-of-service CCA-treated Pinus pinaster Ait. pole. The duration of all the experiments was 30 days, and the current density was kept constant at 0.2 mA/cm{sup 2}. The experiments differ because in one the sawdust was saturated with water (experiment 1) and in the rest it was saturated with oxalic acid, 2.5, 5, and 7.5% (w/w), respectively, in experiments 2--4. The highest removal rates obtained were 93% of Cu, 95% of Cr, and 99% of As in experiment 2. Other experimental conditions might possibly optimize the removal rates.

  15. Analysis of the effect of volume on the bending strength of the Spanish scot and laricio pine timber

    Directory of Open Access Journals (Sweden)

    Fernández-Golfín, J. I.

    2002-12-01

    Full Text Available Since the beginning of the XX century it has been recognized that the bending strength of timber is affected by the size of the specimen. In the present work the influence of depth (h and thickness (t on the characteristic bending strength (fk of both Scot (Pinus sylvestris and Laricio (Pinus nigra pine Spanish grown timber is assessed. 1.733 pieces of both species ranging in size from 100x40x2500 mm to 200x70x4.500 mm and especially sampled for this work, have been tested for bending in accordance with UNE EN 408 standard. In both species, the influence of depth and thickness on the characteristic bending strength of timber is highly significative but different between them and lead to conclude that the effect of the species is also significative and thus that the proposition of general values should be done cautiously, avoiding extrapolations. It is also concluded that, for both species, the effect of thickness seems to be highly significative and thus shouldn’t be ignored by the European standards. Finally, the convenience of revising the present depth factor considered in UNE EN 384 and UNE ENV 1995-1-1 standards is also suggested.

    Desde principios del siglo XX se conoce que la resistencia a la flexión de un elemento estructural viene afectada por su volumen. En el presente trabajo se analiza la influencia de la altura (h y del espesor (t de la sección de la pieza en la resistencia característica a flexión (fk de la madera de pino silvestre (Pinus sylvestris y pino laricio (Pinus nigra de procedencia española. 1.733 vigas de tamaño variable entre 100x40x2500 mm y 200x70x4.500 mm, muestreadas especialmente para este trabajo, fueron ensayadas flexión de acuerdo con la norma UNE EN 408. La influencia de la altura de la sección y del espesor sobre la resistencia característica a flexión en ambas especies de madera resulta ser significativa aunque distinta entre ellas, lo que lleva a concluir que

  16. The structural grading of young South African grown Pinus patula ...

    African Journals Online (AJOL)

    The young P. patula timber tested in this study had good bending strength (MOR) properties with higher characteristic grade values than required. The timber, however, had low stiffness and did not comply with the SANS 10163-1 requirements for mean modulus of elasticity on edge (MOEedge) for any of the structural ...

  17. System Reliability of Timber Structures with Ductile Behaviour

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard; Čizmar, Dean

    2011-01-01

    The present paper considers the evaluation of timber structures with the focus on robustness due to connection ductility. The robustness analysis is based on the structural reliability framework applied to a simplified mechanical system. The structural timber system is depicted as a parallel system....... An evaluation method of the ductile behaviour is introduced. For different ductile behaviours, the system reliability is estimated based on Monte Carlo simulation. A correlation between the strength of the structural elements is introduced. The results indicate that the reliability of a structural timber system...

  18. Robustness Issues for Design of Innovative Timber Structures

    DEFF Research Database (Denmark)

    Hald, Frederik; Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    2013-01-01

    Robustness of structural systems has obtained a renewed interest due to a much more frequent use of advanced types of structures with limited redundancy and serious conse-quences in case of failure. The present paper summaries issues with respect to robustness of timber structures. Two different...... large span timber structures are analyzed and based on these analyses the paper presents guidelines for the future development of innovative timber struc-tures which are robust with respect to design and execution errors, unforeseen degradation and other potential hazards....

  19. Moment Capacity of Timber Reinforced with Punched Metal Plate Fasteners

    DEFF Research Database (Denmark)

    Nielsen, Jacob; Ellegaard, Peter

    When designing timber trusses it is often found that the cross section controlling the dimensions of the top chord is located at a joint with a moment peak. However, the timber volume affected by the moment peak is rather limited and by embedding a punched metal plate in this area a reinforcement...... of the section is obtained, resulting in a more economic truss design. In order to develop design methods for sections with plate reinforcement, bending tests have been made. The timber is Swedish spruce of strength class K-18(S8) and K-24(S10) with a thickness of 45 mm. The punched metal plate is from Gang...

  20. Needle Terpenes as Chemotaxonomic Markers in Pinus: Subsections Pinus and Pinaster.

    Science.gov (United States)

    Mitić, Zorica S; Jovanović, Snežana Č; Zlatković, Bojan K; Nikolić, Biljana M; Stojanović, Gordana S; Marin, Petar D

    2017-05-01

    Chemical compositions of needle essential oils of 27 taxa from the section Pinus, including 20 and 7 taxa of the subsections Pinus and Pinaster, respectively, were compared in order to determine chemotaxonomic significance of terpenes at infrageneric level. According to analysis of variance, six out of 31 studied terpene characters were characterized by a high level of significance, indicating statistically significant difference between the examined subsections. Agglomerative hierarchical cluster analysis has shown separation of eight groups, where representatives of subsect. Pinaster were distributed within the first seven groups on the dendrogram together with P. nigra subsp. laricio and P. merkusii from the subsect. Pinus. On the other hand, the eighth group included the majority of the members of subsect. Pinus. Our findings, based on terpene characters, complement those obtained from morphological, biochemical, and molecular parameters studied over the past two decades. In addition, results presented in this article confirmed that terpenes are good markers at infrageneric level. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

  1. Growth and dynamic modulus of elasticity of Pinus patula × Pinus ...

    African Journals Online (AJOL)

    Field establishment of South Africa's most important commercial pine species, Pinus patula, is severely hampered by the pitch canker fungus, Fusarium circinatum. Importantly, hybrids between P. patula and other pine species tolerant to the pitch canker fungus, such as P. tecunumanii and P. oocarpa, have been identified ...

  2. Rust resistance in seedling families of Pinus albicaulis and Pinus strobiformis and implications for restoration

    Science.gov (United States)

    R. A. Sniezko; A. Kegley; R. Danchok; J. Hamlin; J. Hill; D. Conklin

    2011-01-01

    Infection and mortality levels from Cronartium ribicola, the fungus causing white pine blister rust, are very high in parts of the geographic range of Pinus albicaulis (whitebark pine) and P. strobiformis (Southwestern white pine). Genetic resistance to this non-native fungus will be one of the key factors in maintaining or restoring populations of these species in...

  3. Growth and provenance variation of Pinus caribaea var ...

    African Journals Online (AJOL)

    CAMCORE has visited 33 populations of Pinus caribaea var. hondurensis in Belize, Guatemala, Honduras, El Salvador, Nicaragua, and Quintana Roo, Mexico. Seed collections have been made in 29 provenances from 1, 325 mother trees. A total of 21 provenances and sources of Pinus caribaea var. hondurensis were ...

  4. Germination and early seedling growth of Pinus densata Mast. provenances

    Science.gov (United States)

    Yulan Xu; Nianhui Cai; Bin He; Ruili Zhang; Wei Zhao; Jianfeng Mao; Anan Duan; Yue Li; Keith Woeste

    2016-01-01

    We studied seed germination and early seedling growth of Pinus densata to explore the range of variability within the species and to inform afforestation practices. Phenotypes were evaluated at a forest tree nursery under conditions that support Pinus yunnanensis, one of the presumed parental species of P. densata...

  5. Critical water stress levels in Pinus patula seedlings and their ...

    African Journals Online (AJOL)

    Critical water stress levels in Pinus patula seedlings and their relation to measures of seedling morphology. ... Southern Forests: a Journal of Forest Science ... A pot trial was implemented to determine the effect of soil water stress following transplanting on shoot water potential and stomatal conductance of Pinus patula ...

  6. Effect on nursery and field performance of Pinus patula seedlings ...

    African Journals Online (AJOL)

    Fusarium circinatum is an important fungal pathogen of Pinus species. In South Africa, it is the most significant pathogen of Pinus patula seedlings in forestry nurseries where it presents a substantial constraint to productivity and can continue to cause mortality in-field for up to two years after establishment. This study ...

  7. Morphological evaluation of the Pinus kesiya complex (Pinaceae)

    Czech Academy of Sciences Publication Activity Database

    Businský, R.; Frantík, Tomáš; Vít, Petr

    2014-01-01

    Roč. 300, č. 2 (2014), s. 273-285 ISSN 0378-2697 Institutional support: RVO:67985939 Keywords : morphological var iation * Pinus densata ssp. tibetica * Pinus kesiya complex Subject RIV: EF - Botanics Impact factor: 1.422, year: 2014

  8. An evaluation of wood properties of Pinus caribeae (Morelet) in ...

    African Journals Online (AJOL)

    This paper examines the effects of within tree variation on wood density, ring width and anisotropic shrinkage of Pinus caribeae (Morelet) among tree partitions in Oluwa pine plantation. Five 15-year old Pinus caribeae (Morelet) in three partitions were randomly selected from the plantation and felled for the study. Wood ...

  9. Host range testing of Tamarixia radiata (Hymenoptera: Eulophidae) sourced from the Punjab of Pakistan for classical biological control of Diaphorina citri (Hemiptera: Liviidae: Euphyllurinae: Diaphorinini) in California.

    Science.gov (United States)

    Hoddle, Mark S; Pandey, Raju

    2014-02-01

    ABSTRACT Tests evaluating the host range of Tamarixia radiata (Waterson) (Hymenoptera: Eulophidae), a parasitoid of the pestiferous Asian citrus psyllid, Diaphorina citri Kuwayama (Hemiptera: Liviidae), sourced from the Punjab of Pakistan, were conducted in quarantine at the University of California, Riverside, CA. Seven nontarget psyllid species (five native and two self-introduced species) representing five families were exposed to T radiata under the following three different exposure scenarios: 1) sequential no-choice tests, 2) static no-choice tests, and 3) choice tests. Nontarget species were selected for testing based on the following criteria: 1) taxonomic relatedness to the target, D. citri; 2) native psyllids inhabiting native host plants related to citrus that could release volatiles attractive to T. radiata; 3) native psyllids with a high probability of occurrence in native vegetation surrounding commercial citrus groves that could be encountered by T. radiata emigrating from D. citri-infested citrus orchards; 4) a common native pest psyllid species; and 5) a beneficial psyllid attacking a noxious weed. The results of host range testing were unambiguous; T radiata exhibited a narrow host range and high host specificity, with just one species of nontarget psyllid, the abundant native pest Bactericera cockerelli Sulc, being parasitized at low levels (citri poses negligible environmental risk.

  10. epidemiology of eye diseases among timber workers in owerri

    African Journals Online (AJOL)

    LIVINGSTON

    pinguecula and uveitis, each, accounting for 39.52%, 31.10%, 12.53%, 7.34% and 2.16% respectively ... Timber workers, eye diseases, work environment, prevalence, environmental pollutants. ... there was no interested family member to take.

  11. Profitability of Clerodendrum volubile (eweta) , a non-timber forest ...

    African Journals Online (AJOL)

    Timber Forest product, in Okitipupa, Ondo State Nigeria. Purposive and simple random sampling techniques were used in the selection of markets and respondents. The sample size was 60 and instrument of data collection was structured and ...

  12. Community Based Ecological Monitoring of Non Timber Forest ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Community Based Ecological Monitoring of Non Timber Forest Products in the Nilgiri ... This project will allow Keystone Foundation to design, implement and test a ... traders, forest department officials and other stakeholders in the process.

  13. Creosote treated timber in the Alaskan marine environment : Volume I.

    Science.gov (United States)

    2010-02-01

    ADOT&PF is responsible for many structures that incorporate wood pilings and other timber in Alaska waters. Most are treated with preservative to inhibit marine borers : that will quickly destroy unprotected wood. Creosote is generally the most econo...

  14. Minimizing corrosive action in timber bridges treated with waterborne preservatives

    Science.gov (United States)

    Samuel L. Zelinka; Douglas R. Rammer; James P. Wacker

    2007-01-01

    This work will briefly review published literature and current research activities on the corrosion of metals in contact with wood treated with waterborne alternatives to CCA. In addition, recommendations to minimize these corrosive effects in timber bridges will be discussed.

  15. Impact of timber production and transport costs on stand management

    Science.gov (United States)

    Chris B. LeDoux; Chris B. LeDoux

    1988-01-01

    Evaluates the impact of cable logging technology, transportation network standards, and transport vehicles on stand management. Managers can use results to understand the impact of timber production costs on eastern hardwood management.

  16. Compression strength perpendicular to grain of structural timber and glulam

    DEFF Research Database (Denmark)

    Damkilde, Lars; Hoffmeyer, Preben; Pedersen, Torben N.

    1998-01-01

    The characteristic strength values for compression perpendicular to grain as they appear in EN 338 (structural timber) and EN 1194 (glulam) are currently up for discussion. The present paper provides experimental results based on EN 1193 that may assist in the correct assignment of such strength...... values. The dominant failure mode of glulam specimens is shown to be fundamentally different from that of structural timber specimens. Glulam specimens often show tension perpendicular to grain failure before the compression strength value is reached. Such failure mode is not seen for structural timber....... Nonetheless test results show that the levels of characteristic compression strength perpendicular to grain are of the same order for structural timber and glulam. The values are slightly lower than those appearing in EN 1194 and less than half of those appearing in EN 338. The paper presents a numerical...

  17. Modeling the Effects of Knots in Structural Timber

    DEFF Research Database (Denmark)

    Foley, Christina

    The main purpose of the pursued research presented in this thesis is to increase knowledge of the effects of knots in structural timber so that characteristics of weaker timber may be determined and applied to improve current grading techniques. In the process, a three-dimensional fiber paradigm...... are given to Shigo's knot formation theory, and thus predicts two separate patterns of fiber direction within annual growth layers related to live knots. In order to determine the possibility to practically and non destructively predict local material directions in structural timber with the three...... was established, which describes variations of radial growth direction and fiber orientation related to knots in timber. The adaptability of the paradigm allows practically any softwood knot and its effect on surrounding wood material to be modeled with an accuracy that is limited only by input data. The knot...

  18. Probabilistic representation of duration of load effects in timber structures

    DEFF Research Database (Denmark)

    Svensson, Staffan

    2011-01-01

    Reliability analysis of structures for the purpose of code calibration or reliability verification of specific structures requires that the relevant failure modes are represented and analyzed. For structural timber, sustaining a life load, two failure cases for each failure mode have......-based design of timber structures in terms of a modification factor View the MathML source which is multiplied on the short-term resistance of the timber material. The scenario of a beam subject to office space life loads is analyzed and the modification factor View the MathML source is calibrated by using...... to be considered. These two cases are maximum load level exceeding load-carrying capacity and damage accumulation (caused by the load and its duration) leading to failure. The effect of both load intensity and load duration on the capacity of timber has been an area of large interest over the last decades...

  19. 26 CFR 1.611-3 - Rules applicable to timber.

    Science.gov (United States)

    2010-04-01

    ..., the total quantity under consideration, and the location of the timber in question with reference to... or shares, royalties and rentals, valuation for local or State taxation, partnership accountings...

  20. structural reliability of the nigerian grown abura timber bridge beam

    African Journals Online (AJOL)

    ENGR. J. I. AGUWA

    2013-07-02

    Jul 2, 2013 ... Structural analysis and deterministic design of a timber bridge beam using the Nigerian ... practice especially when it involves naturally occuring materials .... the beam due to distributed loads is; from [15]. (4). It is assumed that ...

  1. Influence of Compression Stresses on Timber Potentials of ...

    African Journals Online (AJOL)

    Eucalyptus camaldulensis Denhn in North-Western Nigeria. *1A. ... further research should be carried out on wood in service to study the peculiarities of timber behaviour under actual .... eastern Nigeria, Neem (Azadirachta indica) was found.

  2. Connectivity of the habitat-forming kelp, Ecklonia radiata within and among estuaries and open coast.

    Science.gov (United States)

    Coleman, Melinda A

    2013-01-01

    With marine protected areas being established worldwide there is a pressing need to understand how the physical setting in which these areas are placed influences patterns of dispersal and connectivity of important marine organisms. This is particularly critical for dynamic and complex nearshore marine environments where patterns of genetic structure of organisms are often chaotic and uncoupled from broad scale physical processes. This study determines the influence of habitat heterogeneity (presence of estuaries) on patterns of genetic structure and connectivity of the common kelp, Ecklonia radiata. There was no genetic differentiation of kelp between estuaries and the open coast and the presence of estuaries did not increase genetic differentiation among open coast populations. Similarly, there were no differences in level of inbreeding or genetic diversity between estuarine and open coast populations. The presence of large estuaries along rocky coastlines does not appear to influence genetic structure of this kelp and factors other than physical heterogeneity of habitat are likely more important determinants of regional connectivity. Marine reserves are currently lacking in this bioregion and may be designated in the future. Knowledge of the factors that influence important habitat forming organisms such as kelp contribute to informed and effective marine protected area design and conservation initiatives to maintain resilience of important marine habitats.

  3. The AVRDC - The World Vegetable Center mungbean (Vigna radiata) core and mini core collections.

    Science.gov (United States)

    Schafleitner, Roland; Nair, Ramakrishnan Madhavan; Rathore, Abhishek; Wang, Yen-wei; Lin, Chen-yu; Chu, Shu-hui; Lin, Pin-yun; Chang, Jian-Cheng; Ebert, Andreas W

    2015-04-29

    Large ex situ germplasm collections generally harbor a wide range of crop diversity. AVRDC--The World Vegetable Center is holding in trust the world's second largest mungbean (Vigna radiata) germplasm collection with more than 6,700 accessions. Screening large collections for traits of interest is laborious and expensive. To enhance the access of breeders to the diversity of the crop, mungbean core and mini core collections have been established. The core collection of 1,481 entries has been built by random selection of 20% of the accessions after geographical stratification and subsequent cluster analysis of eight phenotypic descriptors in the whole collection. Summary statistics, especially the low differences of means, equal variance of the traits in both the whole and core collection and the visual inspection of quantile-quantile plots comparing the variation of phenotypic traits present in both collections indicated that the core collection well represented the pattern of diversity of the whole collection. The core collection was genotyped with 20 simple sequence repeat markers and a mini core set of 289 accessions was selected, which depicted the allele and genotype diversity of the core collection. The mungbean core and mini core collections plus their phenotypic and genotypic data are available for distribution to breeders. It is expected that these collections will enhance the access to biodiverse mungbean germplasm for breeding.

  4. Cytotoxic and Antimalarial Amaryllidaceae Alkaloids from the Bulbs of Lycoris radiata

    Directory of Open Access Journals (Sweden)

    Bin Hao

    2013-02-01

    Full Text Available Phytochemical investigation of the 80% ethanol extract of the bulbs of Lycoris radiata resulted in the isolation of five new Amaryllidaceae alkaloids: (+-5,6-dehydrolycorine (1, (+-3α,6β-diacetyl-bulbispermine (2, (+-3α-hydroxy-6β-acetyl- bulbispermine (3, (+-8,9-methylenedioxylhomolycorine-N-oxide (5, and 5,6-dihydro-5- methyl-2-hydroxyphenanthridine (7, together with two known compounds, (+-3α-methoxy- 6β-acetylbulbispermine (4 and (+-homolycorine- N-oxide (6. Structural elucidation of all the compounds were performed by spectral methods such as 1D and 2D (1H-1H COSY, HMQC, and HMBC NMR spectroscopy, in addition to high resolution mass spectrometry. Alkaloid 1 showed potent cytotoxicity against astrocytoma and glioma cell lines (CCF-STTG1, CHG-5, SHG-44, and U251, as well as HL-60, SMMC-7721, and W480 cell lines with IC50 values of 9.4–11.6 μM. Additonally, compound 1 exhibited antimalarial activity with IC50 values of 2.3 μM for D-6 strain and 1.9 μM for W-2 strain of Plasmodium falciparum.

  5. Pretreatment of radiata pine using two white rot fungal strains Stereum hirsutum and Trametes versicolor

    International Nuclear Information System (INIS)

    Shirkavand, Ehsan; Baroutian, Saeid; Gapes, Daniel J.; Young, Brent R.

    2017-01-01

    Highlights: • Fungal pretreatment by two New Zealand native white rot fungi was proposed. • Trametes versicolor was more efficient in selective degradation of pine wood chips. • Both fungal strains significantly decreased crystallinity index of biomass only after week 7 of degradation. • Structural analysis showed that Trametes versicolor and Stereum hirsutum increased porous surface area of woody biomass. - Abstract: Stereum hirsutum and Trametes versicolor, were studied over a period of 3–7 weeks for pretreatment of radiata pine wood chips. Chemical analysis of pretreated biomass showed that the two studied strains were able to selectively degrade lignin. Selective lignin degradation was greater in week 3 of the pretreatment by Trametes versicolor compared to the other strain. Lengthening pretreatment time increased both lignin and cellulose losses which caused a reduction in selective lignin degradation for both strains. X-ray diffractometry showed that after seven weeks of pretreatment, the crystallinity of the woody biomass was decreased significantly. It decreased from 46% for untreated wood chips to 37% and 44% for Stereum hirsutum and Trametes versicolor treated biomass, respectively. The pretreatment with these two white rot fungi showed that 3-week pretreatment provided a cellulose rich biomass with the minimum cellulose loss compared to the other time of pretreatment.

  6. Injury of leg somatotopy of corticospinal tract at corona radiata by ventriculoperitoneal shunt: A case report.

    Science.gov (United States)

    Jang, Sung Ho; Kwon, Younghyeon

    2018-03-01

    A 45-year-old right-handed female patient suffered head trauma after being hit by a truck that ran into a house. The patient lost consciousness for 1 hour and experienced posttraumatic amnesia for 1 month after the accident. She underwent conservative management for a subdural hematoma in the left frontotemporal lobes and intracerebral hematoma in the left frontal lobe. The patient's Glasgow Coma Scale score was 11. She underwent a VP shunt operation, approached through the right posterior parietal area of the brain, at 4 months after onset. Approximately, 6 months after onset, she was admitted to the rehabilitation department of a university hospital. She presented with moderate weakness of the left leg: Medical Research Council scores: hip flexor; 3, knee extensor; 3+, ankle dorsiflexor; 3-. Brain magnetic resonance imaging revealed a leukomalactic lesion in the right posterior corona radiata along the shunt. On 6-month (2 months after the shunt operation) diffusion tensor tractography, the left CST showed partial injury in the posterior portion compared with the right CST. On 6-month transcranial magnetic stimulation study, the motor-evoked potential obtained at the left tibialis anterior muscle revealed lower amplitude than that on the right side. Injury of leg somatotopy of a CST was demonstrated in a patient with leg weakness following a VP shunt operation.

  7. Reduction in flatulence factors in mung beans (Vigna radiata) using low-dose gamma-irradiation

    International Nuclear Information System (INIS)

    Machaiah, J.P.; Pednekar, M.D.; Thomas, P.

    1999-01-01

    Mungbeans (Vigna radiata), control and gamma-irradiated at insect disinfestation dose levels (0.25 and 0.75 kGy) were germinated (0-6 Bays) and the qualitative and quantitative changes in soluble carbohydrates were studied in detail. The key flatulence-producing raffinose family oligosaccharides inmungbeans were degraded in the irradiated samples at the onset of the germination (0-2 days) compared to the control where it occurred much later (>4days). However, the reducing sugars, mainly glucose, fructose and galactose, which are metabolised easily, were enhanced in the irradiated samples. At low dose (0.25 kGy), irradiation had no effect on germination and sprout length, indicating that irradiated beans are suitable for use as sprouted beans. These observations clearly indicate that gamma-irradiation at insect disinfestation dose levels improved the digestibility and nutritional quality of mung beans by reducing the content of oligosaccharides responsible for intestinal gas production. (C) 1999 Society of Chemical Industry

  8. Increased antioxidant activity and polyphenol metabolites in methyl jasmonate treated mung bean (Vigna radiata sprouts

    Directory of Open Access Journals (Sweden)

    Li LI

    Full Text Available Abstract Mung bean sprouts are a popular health food both in China and worldwide. We determined the optimal concentration of exogenous methyl jasmonate (MeJA for the promotion of the sprouting in mung beans (Vigna radiata. The 1,1-diphenyl-2- picrylhydrazyl radical (DPPH scavenging test showed that MeJA application resulted in significantly improved antioxidant capacity in the sprouts 72 h later. Measurement of total polyphenols in MeJA-treated beans from 0 to 168 h, using Folin–Ciocalteu colorimetry, showed that the polyphenols changing was significantly correlated with antioxidant activity. The main polyphenols isovitexin, kaempferol-3-O-rutinoside, daidzein, genistein, isoquercitrin, p-coumaric acid, and caffeic acid were quantified using high-performance liquid chromatography (HPLC/QqQ MS and partial least squares discriminant analysis (PLS-DA. MeJA promoted the production of polyphenols, metabolites, and antioxidants in the sprouts; therefore, its use may allow sprouts to be prepared more quickly or increase their nutritional value.

  9. Regeneration of Rocky Mountain bristlecone pine (Pinus aristata) and limber pine (Pinus flexilis) three decades after stand-replacing fires

    Science.gov (United States)

    Jonathan D. Coop; Anna W. Schoettle

    2009-01-01

    Rocky Mountain bristlecone pine (Pinus aristata) and limber pine (Pinus flexilis) are important highelevation pines of the southern Rockies that are forecast to decline due to the recent spread of white pine blister rust (Cronartium ribicola) into this region. Proactive management strategies to promote the evolution of rust resistance and maintain ecosystem function...

  10. Timber resource statistics for the Yakataga inventory unit, Alaska, 1976.

    Science.gov (United States)

    Willem W.S. van Hees

    1985-01-01

    Statistics on forest area, total gross and net timber volumes, and annual net growth and mortality are presented from the 1976 timber inventory of the Yakataga unit, Alaska. Timberland area is estimated at 209.3 thousand acres (84.7 thousand ha), net growing stock volume at 917.1 million cubic feet (26.0 million m3), and annual net growth and...

  11. Dowelled structural connections in laminated bamboo and timber

    OpenAIRE

    Reynolds, Thomas Peter; Sharma, Bhavna; Harries, Kent; Ramage, Michael Hector

    2015-01-01

    Structural sections of laminated bamboo can be connected using methods common in timber engineering, however the different material properties of timber and laminated bamboo suggest that the behaviour of connections in the two materials would not be the same. This study investigates the dowelled connection, in which a connector is passed through a hole in the material, and load is resisted by shear in the connector and embedment into the surrounding material. Steel dowels were used in a conne...

  12. T-section glulam timber bridge modules : modeling and performance

    Science.gov (United States)

    Paul A. Morgan; Steven E. Taylor; Michael A. Ritter; John M. Franklin

    1999-01-01

    This paper describes the design, modeling, and testing of two portable timber bridges, each consisting of two noninterconnected longitudinal glued-laminated timber (glulam) deck panels 1.8 m (6 ft) wide. One bridge is 12.2 m (40 ft) long while the other bridge is 10.7 m (35 ft) long. The deck panels are fabricated in a unique double-tee cross section. The bridges...

  13. Reliability based Robustness of Timber Structures through NDT Data Updating

    DEFF Research Database (Denmark)

    Sousa, Hélder S.; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2011-01-01

    This work presents a framework for reliability-based assessment of timber structures / members using data gathered from non-destructive test results. These results are used for modeling an update of the mechanical characteristics of timber, using Bayesian methods. Results gathered from ultrasound...... of the structure, thus, being possible to evaluate reliability based in time dependent factors, as well to categorize that structure in terms of robustness. For exemplification of the underlined concepts, three different types of structures are studied....

  14. Parametric Evaluation of Racking Performance of Platform Timber Framed Walls

    OpenAIRE

    Dhonju, R..; D’Amico, B..; Kermani, A..; Porteous, J..; Zhang, B..

    2017-01-01

    This paper provides a quantitative assessment of the racking performance of partially anchored timber framed walls, based on experimental tests. A total of 17 timber framed wall specimens, constructed from a combination of materials under different load configurations, were tested. The experimental study was designed toexamine the influence of a range of geometrical parameters, such as fastener size and spacings, wall length, arrangement of studs and horizontal members, as well as the effect ...

  15. Efeitos econômicos de diferentes programas de desbaste em povoamentos de pinus elliottii

    Directory of Open Access Journals (Sweden)

    Peter Spathelf

    2000-01-01

    Full Text Available The effect of different thinning programs (light thinning, medium and heavy thinning on the internal rate of return was studied in stands of Pinus elliottii. The sampled stands were planted in 1976 with an inicial spacing of 2 x 2 m. Thinning intensity was expressed by the stand density index of Reinecke (SDI. Thinned volume was determined using the assortment tables of SCHNEIDER & OESTEN (1991 and costs/prices of the year 1998 of the Association of Forest Enterprises of Rio Grande do Sul (AGEFLOR. The highest internal rate of return was obtained with a light thinning with a rotation length of 15 years and an initial density of 2500 trees. The lowest internal rate of return resulted from a light thinning, but in 45 years and with an initial density of 1500 trees. In general, the internal rate of return diminished with increasing rotation length. A sensitivity analysis showed that timber price was the most sensitive variable to influence profitability.

  16. Section of mechanized timbering of an installation layer

    Energy Technology Data Exchange (ETDEWEB)

    Gur' yev, D K; Tomashevskiy, L P; Vorotnyak, M V

    1980-07-28

    A section of mechanized timbering of an installation layer is suggested which includes roof timber, base with cantilever, hydrostand, safety guard which consists of a lower and upper shield, where the lower shield in the lower part has a roll whose upper part is hinged to the cantilever base, and the upper shield is hinged to the roof timber. Its lower part is connected by a linkage to the cantilever of the base. There is also a correcting device, tie rod and holder with rolled material. In order to guarantee stability of the timbering section during work on thick beds and adaptability of the roof timber to the roofing of the bed, the connection between the cantilever and the lower part of the upper shield is made from a longitudinal slit on the cantilever and slide bar placed in it. It is attached by a pin to the lower part of the upper shield. In this case the tie bar is hinged to the linkage and by means of the slide bar to the roof timber, while the correcting device is made of an extension-type support with level which contacts with the wedge and the tightening element installed on the cantilever of the base.

  17. Improving the prediction of strength and rigidity of structural timber by combining ultrasound techniques with visual grading parameters

    Directory of Open Access Journals (Sweden)

    Hermoso Prieto, E.

    2007-12-01

    Full Text Available The present study explores the possibility of using longitudinal ultrasound transmission to evaluate the bending strength and modulus of elasticity in structural timber made from the two species most commonly found in Spanish construction and rehabilitation works: Scots pine (Pinus sylvestris L. and Laricio pine (Pinus nigra Arn.. An analysis of 1305 Scots pine and 852 Laricio pine beams shows that ultrasound transmission velocity alone can predict neither the bending strength nor the modulus of elasticity and that other predictive variables are required.A series of models are proposed based on ultrasound transmission velocity measurements, the relative size of the largest face and edge knots, length and density. After running models for each species individually and for the two jointly, a single model is found to be suitable for both. The models proposed explain from 63 to 73 per cent of bending strength and modulus of elasticity variability.Se analiza la posibilidad de aplicar la técnica de transmisión longitudinal de ultrasonidos para la evaluación de la resistencia y módulo de elasticidad a flexión de la madera estructural de las dos especies de mayor interés constructivo y más amplia presencia en obras de rehabilitación: el pino silvestre (Pinus sylvestris L. y el pino laricio (Pinus nigra Arn.. Trabajando sobre un total de 1.305 vigas de pino silvestre y 852 de pino laricio se concluye que por sí sola la velocidad de transmisión de ultrasonidos no es un buen predictor ni de la resistencia ni del módulo de elasticidad en flexión, necesitando el complemento de otras variables predictoras. Se proponen diversos modelos basados en la medición de la velocidad de transmisión de ultrasonidos, de los diámetros relativos del nudo máximo de cara y de canto, de la longitud y de la densidad. Los modelos se proponen tanto a nivel especie como global, comprobándose que es posible emplear un modelo único para ambas especies. Los modelos

  18. Modelling modulus of elasticity of Pinus pinaster Ait. in northwestern Spain with standing tree acoustic measurements, tree, stand and site variables

    Directory of Open Access Journals (Sweden)

    Esther Merlo

    2014-04-01

    Full Text Available Aim of study: Modelling the structural quality of Pinus pinaster Ait. wood on the basis of measurements made on standing trees is essential because of the importance of the species in the Galician forestry and timber industries and the good mechanical properties of its wood. In this study, we investigated how timber stiffness is affected by tree and stand properties, climatic and edaphic characteristics and competition. Area of study: The study was performed in Galicia, north-western Spain.Material and methods: Ten pure and even-aged P. pinaster stands were selected and tree and stand variables and the stress wave velocity of 410 standing trees were measured. A sub-sample of 73 trees, representing the variability in acoustic velocity, were felled and sawed into structural timber pieces (224 which were subjected to a bending test to determine the modulus of elasticity (MOE. Main results: Linear models including wood properties explained more than 97%, 73% and 60% of the observed MOE variability at site, tree and board level, respectively, with acoustic velocity and wood density as the main regressors. Other linear models, which did not include wood density, explained more than 88%, 69% and 55% of the observed MOE variability at site, tree and board level, respectively, with acoustic velocity as the main regressor. Moreover, a classification tree for estimating the visual grade according to standard UNE 56544:2011 was developed. Research highlights: The results have demonstrated the usefulness of acoustic velocity for predicting MOE in standing trees. The use of the fitted equations together with existing dynamic growth models will enable preliminary assessment of timber stiffness in relation to different silvicultural alternatives used with this species.Keywords: stress wave velocity, modulus of elasticity, site index, competition index, stepwise regression, CART.

  19. Timbered masonry for earthquake resistance in Europe

    Directory of Open Access Journals (Sweden)

    Dutu, A.

    2012-12-01

    Full Text Available Europe is a continent that is subject to significant seismic activity. Thus, the buildings’ seismic behaviour must be analysed, including not only the new structures, designed under more rigorous codes, but also older ones. This article examines a traditional type of building that uses timber frame/masonry, which is found in Portugal, Turkey, France, England, Greece, Romania, Italy, Spain, Germany and Scandinavia. Although the structures differ in terms of construction details, their structural system is basically the same: the wooden structural system bears mainly the horizontal loads while the masonry supports the gravity loads. The study includes a brief report on the seismicity of each country where this traditional type of building made of timbered framed masonry is found, together with the description of these buildings’ constructive systems.

    Europa es un continente que está sujeto a una significativa actividad sísmica. Por esta razón, se debe analizar el comportamiento sísmico, no sólo de las nuevas estructuras, diseñadas sobre la base de códigos más exigentes, sino también de los diversos tipos de estructuras antiguas. En este artículo se analizan las estructuras constituidas por mampostería y madera, que se pueden encontrar en Portugal, Turquía, Francia, Inglaterra, Grecia, Rumania, Italia, España, Alemania y Escandinavia. Aunque estas estructuras presentan diferencias en cuanto a detalles constructivos, su sistema estructural es idéntico: el sistema estructural de madera absorbe principalmente las cargas horizontales, mientras que la mampostería garantiza la resistencia a la acción de la gravedad. El estudio presentado incluye un breve informe acerca de la sismicidad de los países en que existe el tipo de construcción mencionado, conjuntamente con la descripción de los sistemas constructivos específicos de cada país.

  20. POTENSI ALELOPAT DAUN PINUS (Pinus spp. SEBAGAI BIOHERBISIDA PRA TUMBUH PADA GULMA KROKOT (Portulaca oleracea

    Directory of Open Access Journals (Sweden)

    Lutfy Ditya Cahyanti

    2015-06-01

    Full Text Available The aim of this experiment was to study the effectof pine leaf as allelophaty on purslane germination. Theexperiment were conducted at screen house Departmentof Biology, Faculty of Mathematics and Science, BrawijayaUniversity. The research is experimental design by nonfactorial Completely Randomized Blok Design, with threereplications, consisted of eleven levels. Purslane seeds sprout with control treatment, signifi cantly different from seedssprout ability in treatment solution leaves Pinus merkusii 2000ppm, and solution leaves of P. longaeva 2000 ppm. The resultshowed that 2000 ppm of P. merkusii extraction signifi cantlysuppressed 46% of purslane germination whereas 2000 ppmPinus longeava extraction signifi cantly suppressed of 41%campared to without any treatments (control.

  1. Novel ssDNA Viruses Detected in the Virome of Bleached, Habitat-Forming Kelp Ecklonia radiata

    Directory of Open Access Journals (Sweden)

    Douglas T. Beattie

    2018-01-01

    Full Text Available Kelp forests provide essential habitats for organisms in temperate rocky shores. Loss of kelp forests has occurred over large areas in a number of temperate regions, including in Australia, where the dominant kelp Ecklonia radiata has been lost from substantial areas of the shoreline. Loss of E. radiata has been associated with environmental stressors, including increased temperature and anthropogenic contaminants, as well as biological factors, such as herbivory. Disease may also play a role, but there is little information on the role of disease in the loss of kelp from coastal ecosystems or on the potential role of pathogenic microorganisms, such as viruses. E. radiata across much of its distribution in Australia can develop a “bleached” phenotype, which may be a disease. To investigate whether the phenotype was associated with a potential viral agent, we shotgun sequenced viral particles that were isolated from kelp with normal (healthy and bleached phenotypes. Each virome consisted of ~380,000 reads, of which ~25% were similar to known viruses. All samples were dominated by bacteriophages, but novel ssDNA virus sequences were detected that were almost exclusively in viromes from the bleached kelp phenotype. These ssDNA viruses are covered by 11 contigs that contained complete capsids and characteristic rep genes that were 30–60% similar to those of circular, Rep-encoding ssDNA viruses (CRESS-DNA viruses. CRESS-DNA viruses have not previously been described from macroalgae, and the rep genes were similar to CRESS-DNA viruses from marine water samples, snails, crabs, anemones, but also dragonflies. This raises the interesting possibility that the kelp could be a vector of the CRESS-DNA viruses to other organisms that are associated with the bleached state.

  2. Study of the effects of gamma sterilization on a bio material potential bone substitute: the nacre of Pinctada radiata (Leach, 1814)

    International Nuclear Information System (INIS)

    Ben Ammar, Rim

    2010-01-01

    In this work, we studied the effects of gamma irradiation at a dose of 25 kGy on physico-chemical properties of the nacre of the pearl oyster P. radiata Tunisian coast. The aim of our work is, after sterilizing the shell to gamma radiation, the study of its crystal structure, behavior and thermodynamics of the qualitative and quantitative composition of organic and inorganic matrices and compare them with those of the non-irradiated pearl . In addition, there has been interest in developing the method of sterilization with gamma irradiation to 25 kGy of the nacre of the pearl oyster Pinctada radiata.

  3. Genetic Analysis of Pinus sylvestris L. and Pinus sylvestris forma turfosa L. Using RAPD Markers

    Directory of Open Access Journals (Sweden)

    Beáta ÁBRAHÁM

    2010-03-01

    Full Text Available The purpose of the present study was to determine the level of genetic diversity within and among Ciuc basin, Romania (populations from Mohos and Luci raised bogs in Harghita Mountain and Sumuleu in Ciuc Mountain Pinus sylvestris populations using molecular markers. Two of populations (Mohos and Luci seems to be the descendants that survived the continental glaciation. Genetic diversity was analyzed by RAPD (Random Amplified Polymorphic DNA. Nine primers were selected for analysis, which generated reproducible bands. On base of presence or absence of homologues bands Nei’s gene diversity, the percentage of polymorphic loci and Nei’s unbiased genetic distance were calculated. The level of genetic variation among populations was found to be low. For both populations the variation values among populations were higher than within populations. The fossil records and geological historical data explain the extremely low genetic diversity of this species. Pinus sylvestris experienced strong bottlenecks during its evolutionary history, which caused the loss of genetic variation. Genetic drift and breeding in post-bottlenecked small populations may be the major forces that contribute to low genetic diversity and genetic differentiation of populations. Human activities may have accelerated the loss of genetic diversity in Pinus sylvestris.

  4. Density determination in Pino Radiata (D.Don) samples using 59.5 keV gamma radiation attenuation

    International Nuclear Information System (INIS)

    Dinator, Maria I.; Morales, Jose R.; Aliaga, Nelson; Karsulovic, Jose T.; Sanchez, Jaime; Leon, Adolfo

    1996-01-01

    A non destructive method to determine wood samples density is presented. The photon mass attenuation coefficient in samples of Pino radiata (D.Don) was measured at 59.5 keV with a radioactive source of Am-241. The value of 0.192 ± 0.002 cm 2 /g was obtained with a gamma spectroscopy system and later used on the determination of the mass density in sixteen samples of the same species. Comparison of these results with those of gravimetric method through a linear regression showed a slope of 1.001 and a correlation factor of 0.94. (author)

  5. Coronal MRI in the diagnosis of corona radiata infarcts adjacent to the lateral ventricles

    Energy Technology Data Exchange (ETDEWEB)

    Iwamoto, Toshihiko; Abe, Shin-e; Kanaya, Kiyoshi; Kubo, Hideki; Takasaki, Masaru (Tokyo Medical Coll. (Japan))

    1992-04-01

    To clarify pathophysiology of vascular lesions in corona radiata infarcts adjacent to the body of the lateral ventricle (CRILV), 17 patients with CRILV were studied by using magnetic resonance (MR) imaging. Based on the coronal MR images obtained between the anterior and posterior commissures, the patients were divided into two groups: (I) the group having infarcts below a line extending from the upper edge of the insular cistern to the external angle of the lateral ventricle adjacent to the corpus callosum (n=11); and (II) the group having lesions above the line towards the centrum semiovale (n=6). Most of the patients in both groups were male and had hypertension. Symptoms were gradually deteriorated and stroke in the morning was frequent in both groups, althrough the time from onset to completion was longer in Group II than Group I. In comparing clinical manifestations in Groups I and II, pure motor hemiparesis was found in 5 and 3 patients, and sensorimotor stroke in 2 and one patients, respectively. Drowsiness was found in 2 for Group I, while aphasia occurred in 2 for Group II. In addition, pseudobular and asymptomatic palsy occurred in each one patient for Group I. Prognosis was favorable in both groups, except for 2 who died of aspiration pneumonia. In Group I, 11 infarcts were well-defined, less than 15 mm in diameter on CT scans and were sclerotic in the main arteries without obstruction on angiograms. In contrast, Group II had ill-defined, larger low-density areas on CT scans and trunk obstruction of the internal carotid or middle cerebral arteries on angiograms. SPECT scans showed diffuse defect in Group II, in contrast to normal to diffuse or multiple defects in Group I. In Group I, lacunar lesions seemed to be caused by ischemia of the perforators, and in Group II, terminal zone infarcts in the territory of the cortical branches or watershed infarcts seemd to be caused by main trunk obstruction. (N.K.).

  6. Genetic variation for phytic acid content in mungbean (Vigna radiata L. Wilczek

    Directory of Open Access Journals (Sweden)

    Vinod Janardan Dhole

    2015-03-01

    Full Text Available Mungbean (Vigna radiata L. Wilczek is a short-duration legume crop cultivated for seeds that are rich in protein and carbohydrates. Mungbeans contain phytic acid (PA, an anti-nutritional factor that is the main storage form of organic phosphorus in seeds. It is a strong inhibitor against the absorption of nutrients including iron, zinc, calcium and magnesium in monogastric animals. Genotypes with low phytic acid (lpa in seed may show increased assimilation of nutrients and be useful in breeding lpa cultivars. The present study was conducted to identify lpa sources, genetic variation, heritability, and association with seed coat color, inorganic phosphorus (IP, and seed size in 102 mungbean genotypes including released varieties, land races, mutants, and wild species grown in two seasons: summer 2011 and rabi 2012. PA and IP in dry seeds were estimated by modified colorimetric method and Chen's modified method, respectively. PA, IP, and 100-seed weight differed significantly in the two seasons. PA content in 102 genotypes ranged from 5.74 to 18.98 mg g− 1 and 5.85 to 20.02 mg g− 1 in summer 2011 and rabi 2012, respectively. High heritability was found for PA (0.87 and 0.86 and seed size (0.82 and 0.83 but low heritability for IP (0.61 and 0.60. A negative correlation was found between PA and seed size (r = − 0.183 and − 0.267. Yellow and green seed coat genotypes contained significantly less PA than black seed coat genotypes. Cluster analysis revealed the distinctness of wild species, land races and cultivated varieties on the basis of PA content. The genotypes YBSM (6.001 mg g− 1 and JL-781 (6.179 mg g− 1 showed lowest PA. These lpa sources can be used to develop high-yielding mungbean cultivars with low phytic acid.

  7. Mobile phone radiation inhibits Vigna radiata (mung bean) root growth by inducing oxidative stress

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Ved Parkash [Department of Environment and Vocational Studies, Panjab University, Chandigarh 160014 (India); Department of Zoology, Panjab University, Chandigarh 160014 (India); Singh, Harminder Pal, E-mail: hpsingh_01@yahoo.com [Department of Environment and Vocational Studies, Panjab University, Chandigarh 160014 (India); Kohli, Ravinder Kumar; Batish, Daizy Rani [Department of Botany, Panjab University, Chandigarh 160014 (India)

    2009-10-15

    During the last couple of decades, there has been a tremendous increase in the use of cell phones. It has significantly added to the rapidly increasing EMF smog, an unprecedented type of pollution consisting of radiation in the environment, thereby prompting the scientists to study the effects on humans. However, not many studies have been conducted to explore the effects of cell phone EMFr on growth and biochemical changes in plants. We investigated whether EMFr from cell phones inhibit growth of Vigna radiata (mung bean) through induction of conventional stress responses. Effects of cell phone EMFr (power density: 8.55 {mu}W cm{sup -2}; 900 MHz band width; for 1/2, 1, 2, and 4 h) were determined by measuring the generation of reactive oxygen species (ROS) in terms of malondialdehyde and hydrogen peroxide (H{sub 2}O{sub 2}) content, root oxidizability and changes in levels of antioxidant enzymes. Our results showed that cell phone EMFr significantly inhibited the germination (at {>=}2 h), and radicle and plumule growths ({>=}1 h) in mung bean in a time-dependent manner. Further, cell phone EMFr enhanced MDA content (indicating lipid peroxidation), and increased H{sub 2}O{sub 2} accumulation and root oxidizability in mung bean roots, thereby inducing oxidative stress and cellular damage. In response to EMFr, there was a significant upregulation in the activities of scavenging enzymes, such as superoxide dismutases, ascorbate peroxidases, guaiacol peroxidases, catalases and glutathione reductases, in mung bean roots. The study concluded that cell phone EMFr inhibit root growth of mung bean by inducing ROS-generated oxidative stress despite increased activities of antioxidant enzymes.

  8. Mobile phone radiation inhibits Vigna radiata (mung bean) root growth by inducing oxidative stress

    International Nuclear Information System (INIS)

    Sharma, Ved Parkash; Singh, Harminder Pal; Kohli, Ravinder Kumar; Batish, Daizy Rani

    2009-01-01

    During the last couple of decades, there has been a tremendous increase in the use of cell phones. It has significantly added to the rapidly increasing EMF smog, an unprecedented type of pollution consisting of radiation in the environment, thereby prompting the scientists to study the effects on humans. However, not many studies have been conducted to explore the effects of cell phone EMFr on growth and biochemical changes in plants. We investigated whether EMFr from cell phones inhibit growth of Vigna radiata (mung bean) through induction of conventional stress responses. Effects of cell phone EMFr (power density: 8.55 μW cm -2 ; 900 MHz band width; for 1/2, 1, 2, and 4 h) were determined by measuring the generation of reactive oxygen species (ROS) in terms of malondialdehyde and hydrogen peroxide (H 2 O 2 ) content, root oxidizability and changes in levels of antioxidant enzymes. Our results showed that cell phone EMFr significantly inhibited the germination (at ≥2 h), and radicle and plumule growths (≥1 h) in mung bean in a time-dependent manner. Further, cell phone EMFr enhanced MDA content (indicating lipid peroxidation), and increased H 2 O 2 accumulation and root oxidizability in mung bean roots, thereby inducing oxidative stress and cellular damage. In response to EMFr, there was a significant upregulation in the activities of scavenging enzymes, such as superoxide dismutases, ascorbate peroxidases, guaiacol peroxidases, catalases and glutathione reductases, in mung bean roots. The study concluded that cell phone EMFr inhibit root growth of mung bean by inducing ROS-generated oxidative stress despite increased activities of antioxidant enzymes.

  9. Phosphorus Response and Amino Acid Composition of Different Green Gram (Vigna radiata L. Genotypes from Myanmar

    Directory of Open Access Journals (Sweden)

    M. Kywe

    2007-10-01

    Full Text Available Mungbean or green gram (Vigna radiata L. is an important component of rice-based cropping systems in Myanmar, where grain yields of around 800 kg ha^(-1 are much below its yield potential of 3000 kg ha^(-1. The reasons for this shortfall are as under-investigated as is the genotype-specific response of this crop to phosphorus (P application, which is critically low in many Myanmar soils, and the genetic variation in grain quality. For green gram quality, the concentration of lysine, an essential amino acid is particularly important given its scarcity in many cereal-based diets of Southeast Asia. The purpose of this study therefore was to investigate the effects of P application on the root and shoot growth, yield and its components for a range of green gram varieties, and to analyse the protein concentration and amino acid composition in green gram seed of different origins. To this end from 2001 to 2003, field experiments were conducted under rain-fed conditions in Yezin and Nyaung Oo. Fifteen landraces and five introduced green gram cultivars were grown at two levels of P (0 and 15 kg ha^(-1. There were large genotypic differences in P effects and a significant interaction between green gram genotypes and P for shoot and root growth. An unexpected benefit of P application was a reduction of pest and plant virus infestation in the field. Significant genotypic differences in the amino acid profile of seeds were also observed. The results indicate the potential for breeding efforts to increase seed yield and protein quality in green gram.

  10. Influence of distillery effluent on germination and growth of mung bean (Vigna radiata) seeds

    Energy Technology Data Exchange (ETDEWEB)

    Kannan, A. [Biomembrane Toxicology Division, Industrial Toxicology Research Centre, Post Box No. 80, M.G. Marg, Lucknow 226001 (India); Upreti, Raj K. [Biomembrane Toxicology Division, Industrial Toxicology Research Centre, Post Box No. 80, M.G. Marg, Lucknow 226001 (India)], E-mail: upretirk@rediffmail.com

    2008-05-01

    Distillery effluent or spent wash discharged as waste water contains various toxic chemicals that can contaminate water and soil and may affect the common crops if used for agricultural irrigation. Toxic nature of distillery effluent is due to the presence of high amounts of organic and inorganic chemical loads and its high-acidic pH. Experimental effects of untreated (Raw) distillery effluent, discharged from a distillery unit (based on fermentation of alcohol from sugarcane molasses), and the post-treatment effluent from the outlet of conventional anaerobic treatment plant (Treated effluent) of the distillery unit were studied in mung bean (Vigna radiata, L.R. Wilczek). Mung bean is a commonly used legume crop in India and its neighboring countries. Mung bean seeds were presoaked for 6 h and 30 h, respectively, in different concentrations (5-20%, v/v) of each effluent and germination, growth characters, and seedling membrane enzymes and constituents were investigated. Results revealed that the leaching of carbohydrates and proteins (solute efflux) were much higher in case of untreated effluent and were also dependent to the presoaking time. Other germination characters including percentage of germination, speed of germination index, vigor index and length of root and embryonic axis revealed significant concentration-dependent decline in untreated effluent. Evaluation of seedlings membrane transport enzymes and structural constituents (hexose, sialic acid and phospholipids) following 6 h presoaking of seeds revealed concentration-dependent decline, which were much less in treated effluent as compared to the untreated effluent. Treated effluent up to 10% (v/v) concentration reflected low-observed adverse effect levels.

  11. Volatile constituents of Pinus roxburghii from Nepal.

    Science.gov (United States)

    Satyal, Prabodh; Paudel, Prajwal; Raut, Josna; Deo, Akash; Dosoky, Noura S; Setzer, William N

    2013-01-01

    Pinus roxburghii Sarg. Is one of 3 species of pine found in Nepal, the oil of which is traditionally used to treat cuts, wounds, boils, and blisters. To obtain, analyze, and examine the anti-microbial and cytotoxic activities of the essential oils of P. roxburghii. Three plant parts (cone, needle, and bark) of Pinus roxburghii were collected in Biratnagar, Nepal. The essential oils were obtained by hydrodistillation, and the chemical compositions were determined by GC-MS. The needle and cone essential oils were screened for anti-microbial activity against Bacillus cereus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Aspergillus niger; brine shrimp (Artemia salina) lethality; and in-vitro cytotoxicity against MCF-7 cells. GC-MS analysis for the cone oil revealed 81 compounds with 78 components being identified (95.5% of the oil) while 98.3% of needle oil was identified to contain 68 components and 98.6% of the bark oil (38 components) was identified. The 3 essential oils were dominated by sesquiterpenes, particularly (E)-caryophyllene (26.8%-34.5%) and α-humulene (5.0%-7.3%) as well as monoterpene alcohols terpinen-4-ol (4.1%-30.1%) and α-terpineol(2.8%-5.0%). The monoterpene δ-3-carene was present only in needle and cone essential oils (2.3% and 6.8%, respectively). Bio-activity assays of the cone essential oil of P. roxburghii showed remarkable cytotoxic activity (100% killing of MCF-7 cells at 100 μg/mL) along with notable brine shrimp lethality (LC50 =11.8 μg/mL). The cone essential oil did not show anti-bacterial activity, but it did exhibit anti-fungal activity against Aspergillus niger (MIC=39 μg/mL). The bioactivity of P. roxburghii essential oil is consistent with its traditional medicinal use.

  12. Phytochemical analysis of Pinus eldarica bark

    Science.gov (United States)

    Iravani, S.; Zolfaghari, B.

    2014-01-01

    Bark extract of Pinus pinaster contains numerous phenolic compounds such as catechins, taxifolin, and phenolic acids. These compounds have received considerable attentions because of their anti-inflammatory, antimutagenic, anticarcinogenic, antimetastatic and high antioxidant activities. Although P. pinaster bark has been intensely investigated in the past; there is comparably less information available in the literature in regard to P. eldarica bark. Therefore, the aim of this study was to determine the chemical composition of P. eldarica commonly found in Iran. A reversed-phase high pressure liquid chromatography (RP-HPLC) method for the determination of catechin, caffeic acid, ferulic acid, and taxifolin in P. pinaster and P. eldarica was developed. A mixture of 0.1% formic acid in deionized water and 0.1% formic acid in acetonitrile was used as the mobile phase, and chromatographic separation was achieved on a Nova pack C18 at 280 nm. The two studied Pinus species contained high amounts of polyphenolic compounds. Among four marker compounds, the main substances identified in P. pinaster and P. eldarica were taxifolin and catechin, respectively. Furthermore, the composition of the bark oil of P. eldarica obtained by hydrodistillation was analyzed by gas chromatography/mass spectroscopy (GC/MS). Thirty-three compounds accounting for 95.1 % of the oil were identified. The oils consisted mainly of mono- and sesquiterpenoid fractions, especially α-pinene (24.6%), caryophyllene oxide (14.0%), δ-3-carene (10.7%), (E)-β-caryophyllene (7.9%), and myrtenal (3.1%). PMID:25657795

  13. Fire effects in Pinus uncinata Ram plantations

    Directory of Open Access Journals (Sweden)

    Adrián Cardil Forradellas

    2016-04-01

    Full Text Available Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU. PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future.Area of study: Cabdella fire (February 2012, in Lleida province, is one of the several wildland fires occurred in 2012 (winter season in the Central Pyrenees. Fire affected a large PU plantation (102 ha located at 1.800-2,100 meters above the sea.Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height.Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume.Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior.Abbreviations used: PU: Pinus uncinata Ram.

  14. Analisis Komponen Kimia Dan Uji Aktivitas Antibakteri Minyak Atsiri Daun Pinus (Pinus Merkusii Jungh.Et Devries) Dari Kabupaten Samosir

    OpenAIRE

    Siringo-Ringo, Mawar

    2015-01-01

    Essential oil of pinus leaves (Pinus merkusii Jungh.et deVries) have been isolated by hydrodestilation method using Stahl. Pinus leaves have destilated for five hours roduced essential oil 0.1531% (w/w). The results of the analyse use GC-MS showed 23 peaks and can be identified 20 compounds and have five major compounds are Limonene (22.72%), α-Pinene (17.53%), β-Caryophyllene (16.76%), β-Ocimene (14.68%), and Germacren-d (11.24%). Antibacterial activity of the test have been done using ag...

  15. Procurement of timber for the Finnish forest industries

    International Nuclear Information System (INIS)

    Hakkila, P.

    1995-01-01

    The procurement of timber to the forest industries in the Nordic countries is based on the log-length or shortwood system, and employs load-carrying forwarders and chainsaw of single-grip harvesters. This technology is characterized by high productivity, safety, suitability for small-sized trees, high recovery of timber, and environmental friendliness. About one fourth of the industrial timber in the whole world is harvested using the log-length system. The challenge of ecological sustainability, multiple use of forests, adoption of thinnings as a tool of management, trend toward improved utilization of forest biomass, and shift from natural forests to plantations all increase the global interest in the log-length system. The paper presents a review of the Finnish forest sector, the technology of timber harvesting and transport, productivity of logging work, and costs of timber at the mill. The highly mechanized logging systems of the forest industries and the lighter technology of self-employed forest owners are discussed separately. Furthermore, the use of residual biomass as a source of clean and renewable energy, the Finnish logging machine industry, and forest operations research in Finland are also reviewed. (46 refs., 35 figs., 8 tabs.)

  16. Supply Chain Planning for a Timber Harvesting Plus Sale Tender

    Directory of Open Access Journals (Sweden)

    Josef Holoubek

    2015-01-01

    Full Text Available Since 2010, the Czech State Forest Enterprise has been inviting timber-harvesting tenders while insisting on the forestry company purchasing the timber from the felled trees as well. To win, a tender must offer the greatest difference between the price of the timber purchased and the cost of the operations. Thus, the forest companies are now facing new problem: apart from minimizing the logging costs they are searching for a cross-cutting and mill-distribution strategy that maximizes the selling price of the harvested timber. The optimization model devised by the present paper provides support for finding an optimal timber selling strategy and, as an important contribution, include a detailed plan for cross-cutting the logs and assign them to the particular customers. We keep the support accessible via common office software and the cross-cutting and customer-assigning problem is formulated as a linear programming model for EXCEL, a particular real-world problem is solved and, using expert comparison, the model appears to provide very good results.

  17. 36 CFR 13.485 - Subsistence use of timber and plant material.

    Science.gov (United States)

    2010-07-01

    ... cutting of standing timber by local rural residents for appropriate subsistence uses, such as firewood or... materials for subsistence uses, and the noncommerical gathering of dead or downed timber for firewood, shall...

  18. Protection of timber constructions by using electro osmotic pulsing technology (PLEOT)

    OpenAIRE

    Treu, A.; Larnoy, E.; Ribeiro Nunes, L. M.; Duarte, S.; Halvorsen, H.

    2011-01-01

    Timber constructions are often built in combination with other materials such as concrete. These materials can influence the timber construction. Moist concrete can e.g. lead to development of molds which creates an unhealthy living area for people. Furthermore, moisture in wood buildings can negatively affect the wood material, which can lead to negative biological activity in timber and possible reduction of strength properties of timber constructions. The present paper introduces ...

  19. Efficacy of insecticides against army worm (spodoptera mauritia) on mung bean (vigna radiata l.) under arid climate

    International Nuclear Information System (INIS)

    Abbas, G.; Aslam, M.; Khokhar, M.B.; Khattak, J.Z.K.; Malik, A.U.

    2011-01-01

    Influence of Bifenthrine (Talstar) at the rate 375 ml ha/sup -1/, Deltaphos 10+350 EC at the rate 500 ml ha/sup -1/, Lorsban 40 EC at the rate 850 ml ha/sup -1/, Triazofos (20/400 EC) at the rate 750 ml ha/sup -1/and Karate 5 EC at the rate 1250 ml ha/sup -1/ was studied on mung bean (Vigna radiata L.) yield under arid climate at Adaptive Research Farm, Karor during two kharif seasons of 2007 and 2008. Experiments were laid out in randomized complete block design with six a test variety. All the chemicals showed significant impact on mung crop as compared to that in control treatments. AZRI- 2006, a promising variety of mung bean (Vigna radiata L.) for arid climate was used as plots, but the treatment of Deltaphos 10+350 EC at the rate 350 ml ha/sup -1/consistently proved better than other treatments. (author)

  20. Diffusion tensor magnetic resonance imaging for hand and foot fibers location at the corona radiata: comparison with two lesion studies

    Directory of Open Access Journals (Sweden)

    Dong-Hoon eLee

    2014-09-01

    Full Text Available The corticospinal tract is the motor pathway in the human brain, and corona radiata is an important location to diagnose stroke. We detected hand and foot motor fiber tracts in the corona radiata to investigate accurate locations using diffusion tensor imaging and functional imaging. Ten right-handed normal volunteers participated in this study. We used a probabilistic tracking algorithm, a brain normalization method, and functional imaging results to set out ROIs. Moreover, our results were compared to previous results of lesion studies to confirm their accuracy and usefulness. The location measurements were performed in two index types; anteriority index on the basis of the anterior and posterior location of lateral ventricle, laterality index on the basis of the left and right location. The anteriority indices were 56.40/43.2 (hand/foot at the upper CR and lower CR 40.72/30.90 at the lower CR. The measurements of anteriority and laterality of motor fibers were represented as anteriority index 0.40/0.31 and laterality index 0.60/0.47 (hand/foot. Our results showed that the hand and foot fibers were in good agreements with previous lesion studies. This study and approaches can be used as a standard for diffusion tensor image combined with lesion location studies in patients who need rehabilitation or follow up.

  1. In silico genome-wide identification and characterization of the glutathione S-transferase gene family in Vigna radiata.

    Science.gov (United States)

    Vaish, Swati; Awasthi, Praveen; Tiwari, Siddharth; Tiwari, Shailesh Kumar; Gupta, Divya; Basantani, Mahesh Kumar

    2018-05-01

    Plant glutathione S-transferases (GSTs) are integral to normal plant metabolism and biotic and abiotic stress tolerance. The GST gene family has been characterized in diverse plant species using molecular biology and bioinformatics approaches. In the current study, in silico analysis identified 44 GSTs in Vigna radiata. Of the total 44 GSTs identified, chromosomal locations of 31 GSTs were confirmed. The pI value of GST proteins ranged from 5.10 to 9.40. The predicted molecular weights ranged from 13.12 to 50 kDa. Subcellular localization analysis revealed that all GSTs were predominantly localized in the cytoplasm. The active site amino acids were confirmed to be serine in tau, phi, theta, zeta, and TCHQD; cysteine in lambda, DHAR, and omega; and tyrosine in EF1G. The gene architecture conformed to the two-exon/one-intron and three-exon/two-intron organization in the case of tau and phi classes, respectively. MEME analysis identified 10 significantly conserved motifs with the width of 8-50 amino acids. The motifs identified were either specific to a specific GST class or were shared by multiple GST classes. The results of the current study will be of potential importance in the characterization of the GST gene family in V. radiata, an economically important leguminous crop.

  2. Ionizing radiation induced changes in phenotype, photosynthetic pigments and free polyamine levels in Vigna radiata (L.) Wilczek

    International Nuclear Information System (INIS)

    Sengupta, Mandar; Chakraborty, Anindita; Raychaudhuri, Sarmistha Sen

    2013-01-01

    Effects of gamma rays on the free polyamine (PA) levels were studied in Vigna radiata (L.) Wilczek. Seeds exposed to different doses of gamma rays were checked for damage on phenotype, germination frequency and alteration in photosynthetic pigments. Free polyamine levels were estimated from seeds irradiated in dry and water imbibed conditions. Polyamine levels of seedlings grown from irradiated seeds, and irradiated seedlings from unexposed seeds were also measured. Damage caused by gamma irradiation resulted in decrease in final germination percentage and seedling height. Photosynthetic pigments decreased in a dose dependent manner as marker of stress. Polyamines decreased in irradiated dry seeds and in seedlings grown from irradiated seeds. Radiation stress induced increase in free polyamines was seen in irradiated imbibed seeds and irradiated seedlings. Response of polyamines towards gamma rays is dependent on the stage of the life cycle of the plant. - Highlights: ► Gamma irradiation of Vigna radiata (L.) Wilczek seeds and seedlings. ► Decrease in germination frequency. ► Increase in seedling injury with increased dosage of gamma rays. ► Decrease in chlorophyll and carotenoid pigments. ► Change in free polyamine levels

  3. Nontarget effects of chemical pesticides and biological pesticide on rhizospheric microbial community structure and function in Vigna radiata.

    Science.gov (United States)

    Singh, Sunil; Gupta, Rashi; Kumari, Madhu; Sharma, Shilpi

    2015-08-01

    Intensive agriculture has resulted in an indiscriminate use of pesticides, which demands in-depth analysis of their impact on indigenous rhizospheric microbial community structure and function. Hence, the objective of the present work was to study the impact of two chemical pesticides (chlorpyrifos and cypermethrin) and one biological pesticide (azadirachtin) at two dosages on the microbial community structure using cultivation-dependent approach and on rhizospheric bacterial communities involved in nitrogen cycle in Vigna radiata rhizosphere through cultivation-independent technique of real-time PCR. Cultivation-dependent study highlighted the adverse effects of both chemical pesticide and biopesticide on rhizospheric bacterial and fungal communities at different plant growth stages. Also, an adverse effect on number of genes and transcripts of nifH (nitrogen fixation); amoA (nitrification); and narG, nirK, and nirS (denitrification) was observed. The results from the present study highlighted two points, firstly that nontarget effects of pesticides are significantly detrimental to soil microflora, and despite being of biological origin, azadirachtin exerted negative impact on rhizospheric microbial community of V. radiata behaving similar to chemical pesticides. Hence, such nontarget effects of chemical pesticide and biopesticide in plants' rhizosphere, which bring out the larger picture in terms of their ecotoxicological effect, demand a proper risk assessment before application of pesticides as agricultural amendments.

  4. Late Eocene white pines (Pinus subgenus Strobus) from southern China.

    Science.gov (United States)

    Xu, Qingqing; Zhou, Wenjun; Kodrul, Tatiana M; Naugolnykh, Serge V; Jin, Jianhua

    2015-11-09

    Fossil records indicate that the genus Pinus L. split into two subgenera by the Late Cretaceous, although subgenus Strobus (D. Don) Lemmon is less well documented than subgenus Pinus L., especially in eastern Asia. In this paper, Pinus maomingensis sp. nov. is established based on a compressed seed cone from the upper Eocene of the Maoming Basin of southern China. This species is attributed to genus Pinus, subgenus Strobus, section Quinquefoliae Duhamel, subsection Strobus Loudon based on the combination of morphological characters obtained from the cone scales, specifically from the terminal umbo, rhombic apophysis, and cuticle structure. Associated fascicles of needle leaves with deciduous sheaths and bulbous bases are recognized as Pinus sp. and also represent Pinus subgenus Strobus. This new discovery from the Maoming Basin constitutes the first megafossil record of subgenus Strobus from southern China and implies that the members of this subgenus arrived in the southern region of China by the late Eocene. The extant species of subgenus Strobus are mainly distributed in northern temperate and tropical to subtropical mountainous regions. We propose that the Maoming Basin was adjacent to a mountainous region during the late Eocene.

  5. A Probabilistic Approach for Robustness Evaluation of Timber Structures

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Sørensen, John Dalsgaard

    of Structures and a probabilistic modelling of the timber material proposed in the Probabilistic Model Code (PMC) of the Joint Committee on Structural Safety (JCSS). Due to the framework in the Danish Code the timber structure has to be evaluated with respect to the following criteria where at least one shall...... to criteria a) and b) the timber frame structure has one column with a reliability index a bit lower than an assumed target level. By removal three columns one by one no significant extensive failure of the entire structure or significant parts of it are obatined. Therefore the structure can be considered......A probabilistic based robustness analysis has been performed for a glulam frame structure supporting the roof over the main court in a Norwegian sports centre. The robustness analysis is based on the framework for robustness analysis introduced in the Danish Code of Practice for the Safety...

  6. Reliability Analysis of Timber Structures through NDT Data Upgrading

    DEFF Research Database (Denmark)

    Sousa, Hélder; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    The first part of this document presents, in chapter 2, a description of timber characteristics and common used NDT and MDT for timber elements. Stochastic models for timber properties and damage accumulation models are also referred. According to timber’s properties a framework is proposed...... for a safety reassessment procedure. For that purpose a theoretical background for structural reliability assessment including probabilistic concepts for structural systems and stochastic models are given in chapter 3. System models, both series and parallel systems, are presented as well as methods...... for robustness are dealt in chapter 5. The second part of this document begins in chapter 6, where a practical application of the premise definitions and methodologies is given through the implementation of upgraded models with NDT and MDT data. Structural life-cycle is, therefore, assessed and reliability...

  7. Multi-Scalar Modelling for Free-form Timber Structures

    DEFF Research Database (Denmark)

    Poinet, Paul; Nicholas, Paul; Tamke, Martin

    2016-01-01

    .The research explores the design probe of free-form structures composed of glue-laminated timber beams and looks at the different types of data that need to be shared among each discipline and across multiple scales from which different levels of resolution can be defined. A particular focus lies...... in the segmentation strategy of glue-laminated timber structures that depend on structural requirements and the different types of constraints related to fabrication, transportation and assembly. Where current working practices decouple segmentation processes within a discrete digital workflow, this research aims...... and techniques as a means to work within a continuous design environment in which an abstract network of timber beams is iteratively updated through geometrical and structural optimizations at different levels of resolution....

  8. Risks, Information and Short-Run Timber Supply

    Directory of Open Access Journals (Sweden)

    Francesca Rinaldi

    2013-12-01

    Full Text Available Efforts to increase wood mobilization have highlighted the need to appraise drivers of short-run timber supply. The current study aims to shed further light on harvesting decisions of private forest owners, by investigating optimal harvesting under uncertainty, when timber revenues are invested on financial markets and uncertainty is mitigated by news releases. By distinguishing between aggregate economic risk and sector specific risks, the model studies in great detail optimal harvesting-investment decisions, with particular emphasis on the non-trivial transmission of risk on optimal harvesting, and on the way private forest owners react to news and information. The analysis of the role played by information in harvesting decisions is a novelty in forest economic theory. The presented model is highly relevant from a policy—information is a commonly used forest policy instrument—as well as a practical perspective, since the mechanism of risk transmission is at the basis of timber pricing.

  9. Impacts on South Carolina timber production over the last five decades.

    Science.gov (United States)

    Jinglong Mo; Thomas Straka; Richard Harper

    2013-01-01

    Timberland ownership patterns and national forest timber harvesting policy have undergone significant changes in South Carolina over the past five decades. Timber output studies for the state commonly focused on short time frames and seldom addressed timberland ownership patterns in detail. We describe fifty-year timber output for South Carolina, allowing us to address...

  10. Development of a six-year research needs assessment for timber transportation structures

    Science.gov (United States)

    Terry J. Wipf; Michael A. Ritter; Sheila Rimal Duwadi; Russell C. Moody

    1993-01-01

    A timber bridge, once a thing of the past, is now becoming a thing of the present. Interest in timber bridges and other transportation structures has been rapidly increasing. Much of this is due to new technologies in design and construction as well as advances in material manufacturing and presevative treatments. Although timber bridges and other transportation...

  11. Forensic timber identification: It's time to integrate disciplines to combat illegal logging

    Science.gov (United States)

    Eleanor E. Dormontt; Markus Boner; Birgit Braun; Gerhard Breulmann; Bernd Degen; Edgard Espinoza; Shelley Gardner; Phil Guillery; John C. Hermanson; Gerald Koch; Soon Leong Lee; Milton Kanashiro; Anto Rimbawanto; Darren Thomas; Alex C. Wiedenhoeft; Yafang Yin; Johannes Zahnen; Andrew J. Lowe

    2015-01-01

    The prosecution of illegal logging crimes is hampered by a lack of available forensic timber identification tools, both for screening of suspectmaterial and definitive identification of illegally sourcedwood. Reputable timber traders are also struggling to police their own supply chains and comply with the growing requirement for due diligence with respect to timber...

  12. Robustness Analysis of a Timber Structure with Ductile Behaviour in Compression

    DEFF Research Database (Denmark)

    Čizmar, Dean; Sørensen, John Dalsgaard; Kirkegaard, Poul Henning

    2011-01-01

    This paper presents a probabilistic approach for structural robustness assessment for a timber structure built a few years ago. The robustness analysis is based on a structural reliability based framework for robustness assessment. The complex timber structure with a large number of failure modes...... material ductility of timber is taken into account. The robustness is expressed and evaluated by a robustness index....

  13. The 1993 timber assessment market model: structure, projections, and policy simulations.

    Science.gov (United States)

    Darius M. Adams; Richard W. Haynes

    1996-01-01

    The 1993 timber assessment market model (TAMM) is a spatial model of the solidwood and timber inventory elements of the U.S. forest products sector. The TAMM model provides annual projections of volumes and prices in the solidwood products and sawtimber stumpage markets and estimates of total timber harvest and inventory by geographic region for periods of up to 50...

  14. Using TPO data to estimate timber demand in support of planning on the Tongass National Forest

    Science.gov (United States)

    Jean M. Daniels; Michael D. Paruszkiewicz; Susan J. Alexander

    2015-01-01

    Projections of Alaska timber products output, the derived demand for logs, lumber, residues, and niche products, and timber harvest by owner are developed by using a trend-based analysis. This is the fifth such analysis performed since 1990 to assist planners in meeting statutory requirements for estimating planning cycle demand for timber from the Tongass National...

  15. 36 CFR 294.24 - Timber cutting, sale, or removal in Idaho Roadless Areas.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Timber cutting, sale, or..., DEPARTMENT OF AGRICULTURE SPECIAL AREAS Idaho Roadless Area Management § 294.24 Timber cutting, sale, or removal in Idaho Roadless Areas. (a) Wild Land Recreation. The cutting, sale, or removal of timber is...

  16. Ocean acidification reverses the positive effects of seawater pH fluctuations on growth and photosynthesis of the habitat-forming kelp, Ecklonia radiata.

    Science.gov (United States)

    Britton, Damon; Cornwall, Christopher E; Revill, Andrew T; Hurd, Catriona L; Johnson, Craig R

    2016-05-27

    Ocean acidification (OA) is the reduction in seawater pH due to the absorption of human-released CO2 by the world's oceans. The average surface oceanic pH is predicted to decline by 0.4 units by 2100. However, kelp metabolically modifies seawater pH via photosynthesis and respiration in some temperate coastal systems, resulting in daily pH fluctuations of up to ±0.45 units. It is unknown how these fluctuations in pH influence the growth and physiology of the kelp, or how this might change with OA. In laboratory experiments that mimicked the most extreme pH fluctuations measured within beds of the canopy-forming kelp Ecklonia radiata in Tasmania, the growth and photosynthetic rates of juvenile E. radiata were greater under fluctuating pH (8.4 in the day, 7.8 at night) than in static pH treatments (8.4, 8.1, 7.8). However, pH fluctuations had no effect on growth rates and a negative effect on photosynthesis when the mean pH of each treatment was reduced by 0.3 units. Currently, pH fluctuations have a positive effect on E. radiata but this effect could be reversed in the future under OA, which is likely to impact the future ecological dynamics and productivity of habitats dominated by E. radiata.

  17. Analysis of disconnected diallel mating designs II: results from a third generation progeny test of the New Zealand radiata pine improvement programme.

    Science.gov (United States)

    J.N. King; M.J. Carson; G.R. Johnson

    1998-01-01

    Genetic parameters from a second generation (F2) disconnected diallel progeny test of the New Zealand radiata pine improvement programme are presented. Heritability estimates of growth and yield traits of 0.2 are similar to progeny test results of the previous generation (F1) generation tests. A trend of declining dominance...

  18. Acute Toxicity of Fresh and Aged Residues of Pesticides to the Parasitoid Tamarixia radiata and to the HLB-Bacteria Vector Diaphorina citri.

    Science.gov (United States)

    Beloti, V H; Alves, G R; Moral, R A; Demétrio, C G B; Yamamoto, P T

    2018-06-01

    One method for controlling the Asian citrus psyllid (ACP) Diaphorina citri Kuwayama, the vector of the putative causal agent of Huanglongbing, uses the parasitoid Tamarixia radiata (Waterston). However, the general intensive use of insecticides has reduced the numbers of this parasitoid. This study evaluated the effect of the residual action of 24 insecticides on T. radiata and also determined the differential toxicity of insecticides to D. citri and T. radiata, using three bioassays. In the first, when adults of the parasitoid were exposed to residues of the 24 insecticides, ten were considered short-life (class 1), six slightly persistent (class 2), five moderately persistent (class 3), and three insecticides were considered persistent (class 4), under the IOBC/WPRS classification system. The second bioassay evaluated the sublethal concentrations of the persistent insecticides (formetanate, dimethoate, spinosad). Increasing the concentrations of the insecticides increased the number that were classified as persistent. In the third bioassay, evaluation of the differential toxicity of eight insecticides to the ACP and the parasitoid showed that chlorpyrifos and bifenthrin were more harmful to T. radiata. Therefore, these two insecticides are not recommended for application at the time of parasitoid release. Cypermethrin, imidacloprid, and dimethoate caused higher mortality of D. citri and are most often recommended in IPM programs. The choice of an insecticide for the control of citrus pests must be made with care, aiming to preserve the natural enemies in the ecosystem, and thereby contribute to the success of biological control.

  19. Protection of mechanized timberings on beds dangerous for mine impacts

    Energy Technology Data Exchange (ETDEWEB)

    Budirsky, S

    1982-01-01

    In some stoping faces on beds which are dangerous for mine impacts, mechanized timbering is successfully used which is not equipped with protection from the effect of these dynamic phenomena. This generated the idea that in the indicated conditions, mechanized timbering may not be equipped with protective devices against dynamic loads. Theoretical studies have shown that the effects of mine impacts depends on the total energy of the impact, distance of this stoping face from the epicenter of the impact, as well as the capacity of the rock massif to transmit and absorb energy of the mine impact. This means that the effect of the mine impact under different conditions is not the same, the mine impacts of lower energy under definite conditions can result in greater damages to the mechanized timbering than mine impact with higher energy. It is believed that the effect of absorption of energy of the mine impact depends on the method of control of the roofing in the stoping face, the presence of hydraulic fill quarantees absorption of up to 80% of its energy. The experience of working beds which are dangerous for mine impacts in the upper Silesia coal basin indicated that the designs of the mechanized timbering, especially shield, in which the stands are not rigidly connected to the roof timber, during operation on beds with thickness 2.5-4 m withstand mine impacts with energy 10/sup 7/ J without significant disorders (mine impacts with this energy occur very frequently . For energy of mine impact of 108 J (impacts with this energy are observed comparatively rarely), the mechanized timberings are considerably damaged.

  20. Theory of timber connections with slender dowel type fasteners

    DEFF Research Database (Denmark)

    Svensson, Staffan; Munch-Andersen, Jørgen

    2018-01-01

    A theory on the lateral load-carrying capacity of timber connections with slender fasteners is presented. The base of the theory is the coupled mechanical phenomena acting in the connection, while the wood and the slender fastener deform and yield prior to failure. The objective is to derive...... a sufficient description of actions and responses which have determining influence on the load-carrying capacity of timber connections with slender fasteners. Model assumptions are discussed and made, but simplifications are left out. Even so, simple mathematical equations describing the lateral capacity......-carrying capacity of the tested connections....

  1. Global timber trade pattern: the cards have changed

    OpenAIRE

    Roda Jean-Marc; Rohana Abd Rahman; Ismariah Ahmad; Lim Hin Fui; Mohd Parid Mamat

    2011-01-01

    Since the 1960s, the global timber trade has gradually evolved from a South-North trade to a South-South trade, with an acceleration of the phenomenon in the mid 1990s. Nowadays, Asia consumes more than 70% (in round wood equivalent) of the forest products originating from the tropics. Africa becomes the new frontier for the supplies of wood material for Asian giants, which now source raw wood from all over the world. Since the mid 1990s, the dynamics of the tropical timber trade have been in...

  2. Fire resistance in American heavy timber construction history and preservation

    CERN Document Server

    Heitz, Jesse

    2016-01-01

    This volume presents a history of heavy timber construction (HTC) in the United States, chronicling nearly two centuries of building history, from inception to a detailed evaluation of one of the best surviving examples of the type, with an emphasis on fire resistance. The book does not limit itself in scope to serving only as a common history. Rather, it provides critical analysis of HTC in terms of construction methods, design, technical specifications, and historical performance under fire conditions. As such, this book provides readers with a truly comprehensive understanding and exploration of heavy timber construction in the United States and its performance under fire conditions.

  3. Pre-Stressing Timber-Based Plate Tensegrity Structures

    DEFF Research Database (Denmark)

    Falk, Andreas; Kirkegaard, Poul Henning

    2012-01-01

    Tensile structures occur in numerous varieties utilising combinations of tension and compression. Introducing structural plates in the basic tensegrity unit and tensegric assemblies varies the range of feasible topologies and provides the structural system with an integrated surface. The present...... paper considers the concept of plate tensegrity based on CLT plates (cross-laminated timber). It combines the principles of tensegrity with the principles of plate shells and is characterised by a plate shell stabilised by struts and cables. The paper deals with material aspects and robustness of timber...

  4. Analysis of the Strength of Timber and Glulam Timber Beams with Steel Reinforcement

    Directory of Open Access Journals (Sweden)

    Arie Putra Usman

    2015-12-01

    Full Text Available Indonesia is a tropical country with abundant tropical timber that can be used as a building material. Wood is a renewable material, thus making it an environmentally friendly construction material. However, the dimensional limitations of solid wood may pose problems in structural constructions. Wood material also has some disadvantages, such as brittle failure. However, the ductility of wood can be increased because of plasticity occurring in the compression zone. Wood material with good ductility can be obtained by reinforcing it in the tensile zone. This study is about the strength of wood material for use as a material for structural elements. Based on the analytical findings, the bending capacity of wood can be improved by adding reinforcements to the tensile zone.

  5. Contrasting Effects of Aqueous Tissue Extracts from an Invasive Plant, Bidens pilosa L. var. radiata, on the Performance of Its Sympatric Plant Species

    Directory of Open Access Journals (Sweden)

    Hsiao-Mei Hsu

    2009-09-01

    Full Text Available Bidens pilosa L. var. radiata Sch. Bip., a common weed in lowland Taiwan, is listed as one of the twenty most noxious invasive plants in Taiwan. In this study, we examined the effect of aqueous extracts of leaves, stems and roots of the invasive plant on germination and growth of seedlings (estimated by measuring the elongation of hypocotyls and radicals of the same species and two other sympatric species, B. bipinnata and Ageraturem conyzoides. The objective of this study was to understand whether the aqueous tissue extracts affected the performance of the target species and whether these effects varied among tissue types and among target species. We found that the germination percentage of seeds of B. bipinnata was significantly reduced by root and leaf extracts, that of B. pilosa var. radiata was also significantly reduced by the application of root extract, while that of A. conyzoides was not affected by any of the three tissue extracts. The application of stem and leaf extracts inhibited the elongation of radicals of B. pilosa var. radiata, consequently, the growth of seedlings of this species was decreased in these two treatments. Though the elongation of hypocotyls was stimulated by leaf extract, the overall growth of seedlings of B. bipinnata was not affected by any tissue extract. In contrast, all three extracts stimulated the elongation of hypocotyls and radicals of A. conyzoides, consequently, the overall growth of seedlings of this plant was promoted by all three extracts. These results revealed that aqueous extracts from tissue of B. pilosa var. radiata had differential effect on the emergence and seedling growth of the three target species. The inhibition effect of its root and leaf extracts on the germination of B. bipinnata may partially explain the overwhelming dominance of B. pilosa var. radiata over B. bipinnata when they are sympatric.

  6. Dendrochronology of bristlecone pine, Pinus longaeva

    International Nuclear Information System (INIS)

    Ferguson, C.W.

    1979-01-01

    Since 1953 the Laboratory of Tree-Ring Research has conducted dendrochronological studies of bristlecone pine Pinus longaeva D.K. Bailey, sp. nov.) in the White Mountains of California. This research resulted in the establishment of a continuous tree-ring sequence of 8253 yr. The millennia-old pines have emerged as a unique source of chronological data and the precisely dated wood is essential to certain paleoenvironmental and geophysical investigations. Over 1000 dendrochronologically dated decade samples of bristlecone pine supplied to three C-14 laboratories have been used to calibrate the radiocarbon time scale for the past seven millennia, a development of far reaching consequences in the fields of archaeology and geology. In addition, recent advances in other methods of analyzing past climatic variability - techniques involving stable isotope ratios, amino acid racemization, remanent magnetism and trace element abundances - have greatly increased the demand for wood of known age and, hence, for chronology development. Spanning the past 7500 yr, 1138 prepared decade samples, with a total weight of nearly 16 kg are available for study. (author)

  7. Fusariose em Mudas de Pinus taeda Fusarium disease on Pinus taeda seedlings

    Directory of Open Access Journals (Sweden)

    Albino Grigoletti Júnior

    2011-03-01

    Full Text Available

    Viveiros comerciais têm apresentado mudas de Pinus taeda com sintomas de murcha e seca de ponteiros e morte, na Região Sul do Brasil. Isolamento em meio BDA e câmara úmida, teste de patogenicidade e microcultivo foram feitos para identificar o patógeno. Uma espécie de Fusarium foi isolada, cuja identificação encontra-se em andamento. Verificou-sepelos postulados de Koch que Fusarium sp. foi o agente causal dessa doença.
    Nurseries has presented Pinus taeda seedling with symptoms of wilt, tip blight and death, in Southern Region of Brazil. Isolation on PDA medium, moist chamber, pathogenicity test and microculture were made to identify the pathogen. A species of Fusarium was isolated, which is under identification. It was verified by Koch postulates that Fusarium sp. was the causal agent of this disease.

  8. Pinus nigra and Pinus pinaster needles as passive samplers of polycyclic aromatic hydrocarbons

    International Nuclear Information System (INIS)

    Piccardo, Maria Teresa; Pala, Mauro; Bonaccurso, Bruna; Stella, Anna; Redaelli, Anna; Paola, Gaudenzio; Valerio, Federico

    2005-01-01

    Nine polycyclic aromatic hydrocarbons (PAHs) were analysed in pine needles of different ages (from 6 to 30 months) collected from two species, Pinus nigra and Pinus pinaster, in seven sites located along a transect from a suburban to a rural area of Genoa (Italy). In all sites and for both species, concentrations of more volatile PAHs (phenanthrene, anthracene, fluoranthene, pyrene) were higher than those for other less volatile PAHs, which are preferentially sorbed to airborne particulates (benzo[a]anthracene, chrysene, benzofluoranthenes, benzo[a]pyrene). Concentrations of total PAHs found in P. nigra in the rural sites were, on the average, 2.3 times higher than those in P. pinaster growing nearby. In both pine species, concentrations of volatile PAHs increased according to needle age. Annual trends of other PAHs were more variable, with a general decrease in older needles. P. pinaster needles are shown to be more reliable passive samplers, since they are more resistant to plant diseases, and considerable variation in PAH concentration was observed in P. nigra needles with moulds and fungi. - The suitability of the pine needles as passive air samplers for persistent trace organics is demonstrated

  9. Pinus nigra and Pinus pinaster needles as passive samplers of polycyclic aromatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Piccardo, Maria Teresa [Environmental Chemistry Laboratory, National Cancer Research Institute, Genova. L.go Rosanna Benzi n. 10, 16132 Genova (Italy)]. E-mail: chimamb@istge.it; Pala, Mauro [Environmental Chemistry Laboratory, National Cancer Research Institute, Genova. L.go Rosanna Benzi n. 10, 16132 Genova (Italy); Bonaccurso, Bruna [Environmental Chemistry Laboratory, National Cancer Research Institute, Genova. L.go Rosanna Benzi n. 10, 16132 Genova (Italy); Stella, Anna [Environmental Chemistry Laboratory, National Cancer Research Institute, Genova. L.go Rosanna Benzi n. 10, 16132 Genova (Italy); Redaelli, Anna [Environmental Chemistry Laboratory, National Cancer Research Institute, Genova. L.go Rosanna Benzi n. 10, 16132 Genova (Italy); Paola, Gaudenzio [Botany Department, Genoa University, C.so Dogali 1 canc., 16136 Genova (Italy); Valerio, Federico [Environmental Chemistry Laboratory, National Cancer Research Institute, Genova. L.go Rosanna Benzi n. 10, 16132 Genova (Italy)

    2005-01-01

    Nine polycyclic aromatic hydrocarbons (PAHs) were analysed in pine needles of different ages (from 6 to 30 months) collected from two species, Pinus nigra and Pinus pinaster, in seven sites located along a transect from a suburban to a rural area of Genoa (Italy). In all sites and for both species, concentrations of more volatile PAHs (phenanthrene, anthracene, fluoranthene, pyrene) were higher than those for other less volatile PAHs, which are preferentially sorbed to airborne particulates (benzo[a]anthracene, chrysene, benzofluoranthenes, benzo[a]pyrene). Concentrations of total PAHs found in P. nigra in the rural sites were, on the average, 2.3 times higher than those in P. pinaster growing nearby. In both pine species, concentrations of volatile PAHs increased according to needle age. Annual trends of other PAHs were more variable, with a general decrease in older needles. P. pinaster needles are shown to be more reliable passive samplers, since they are more resistant to plant diseases, and considerable variation in PAH concentration was observed in P. nigra needles with moulds and fungi. - The suitability of the pine needles as passive air samplers for persistent trace organics is demonstrated.

  10. Evaluation of ischemic corticospinal tract damage by diffusion tensor MRI. Its significance to predict functional outcome of corona radiata infarct

    International Nuclear Information System (INIS)

    Tanaka, Hideki

    2010-01-01

    Motor impairment is one of the most frequent symptoms among stroke patients and often leads to poststroke dependency. Recent advances of diffusion tensor MR imaging made it possible to identify corticospinal tract (CST) three-dimensionally and evaluate structural damage, so precise evaluation of the ischemic CST damage became feasible.Motor impairment, lesion size and location upon diffusion weighted MR image and clinical outcome were assessed in 23 acute to subacute capsular and corona radiata infarct patients. According to the lesion size, patients were grouped into A, maximal diameter below 15 mm and B, that above 15 mm. Motor impairment was graded severe: limb movement synergy level, moderate: selective muscle activity possible and mild: isolated movements well co-ordinated, each corresponding to Brunnstrom stage 1-3, 4-5, and 6, respectively. Outcome at the time of discharge was assessed by modified Rankin Scale (mRS), discharge destination and length of hospital stay were also registered. Diffusion tensor MR imaging was conducted in 15 corona radiata infarct patients at 2.3+-2.2 days from the onset of the clinical symptoms. CST was 3-dimensionally identified with dTV. II. SR and Volume-one 1.72 and CST-FA ratio (ipsi-/contralesional CST-FA) and CST-Area% (CST lesion free area/whole CST area) were obtained at the level where ischemic damage was most prominent and correlation of these parameters to motor impairment and clinical outcome was studied. CST-FA ratio and CST-Area% were in good correlation to motor impairment at presentation. Patients with severe motor impairment had lower CST-FA ratio and CSF-Area% than those with moderate or mild. CST-FA ratio was 0.73+-0.22 in patients with poor clinical outcome (mRS 3-6) and 0.93+-0.09 with good clinical outcome (mRS 0-2) (p=0.038). Diffusion tensor MR imaging is useful in evaluating motor impairment and predicting functional outcome of corona radiata infarct patient in the acute to subacute stage. (author)

  11. Salt and drought stress and ABA responses related to bZIP genes from V. radiata and V. angularis.

    Science.gov (United States)

    Wang, Lanfen; Zhu, Jifeng; Li, Xiaoming; Wang, Shumin; Wu, Jing

    2018-04-20

    Mung bean and adzuki bean are warm-season legumes widely cultivated in China. However, bean production in major producing regions is limited by biotic and abiotic stress, such as drought and salt stress. Basic leucine zipper (bZIP) genes play key roles in responses to various biotic and abiotic stresses. However, only several bZIP genes involved in drought and salt stress in legumes, especially Vigna radiata and Vigna angularis, have been identified. In this study, we identified 54 and 50 bZIP proteins from whole-genome sequences of V. radiata and V. angularis, respectively. First, we comprehensively surveyed the characteristics of all bZIP genes, including their gene structure, chromosome distribution and motif composition. Phylogenetic trees showed that VrbZIP and VabZIP proteins were divided into ten clades comprising nine known and one unknown subgroup. The results of the nucleotide substitution rate of the orthologous gene pairs showed that bZIP proteins have undergone strong purifying selection: V. radiata and V. angularis diverged 1.25 million years ago (mya) to 9.20 mya (average of 4.95 mya). We also found that many cis-acting regulatory elements (CAREs) involved in abiotic stress and plant hormone responses were detected in the putative promoter regions of the bZIP genes. Finally, using the quantitative real-time PCR (qRT-PCR) method, we performed expression profiling of the bZIP genes in response to drought, salt and abscisic acid (ABA). We identified several bZIP genes that may be involved in drought and salt responses. Generally, our results provided useful and rich resources of VrbZIP and VabZIP genes for the functional characterization and understanding of bZIP transcription factors (TFs) in warm-season legumes. In addition, our results revealed important and interesting data - a subset of VrbZIP and VabZIP gene expression profiles in response to drought, salt and ABA stress. These results provide gene expression evidence for the selection of

  12. In vitro propagation of an endangered medicinal timber species ...

    African Journals Online (AJOL)

    The over exploitation of African mahogany in tropical forest has threatened the genetic base of this useful timber and medicinal tree species and as such, an experiment was conducted on the in vitro culture of Khaya grandifoliola, an endangered tree species commonly found in the high forest zones of West Africa to explore ...

  13. 75 FR 63419 - Surety Bond Guarantee Program; Timber Sales

    Science.gov (United States)

    2010-10-15

    ... with the contract terms. 36 CFR 223.35. Generally, the Performance Bond, as defined in 13 CFR 115.10, ensures that the Principal, as defined in 13 CFR 115.10, complies with all contract terms and conditions... timber sale contracts awarded by the Federal Government or other public or private landowners. DATES...

  14. Montana's forest products industry and timber harvest, 2004

    Science.gov (United States)

    Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

    2008-01-01

    This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

  15. Projecting southern timber supply for multiple products by subregion

    Science.gov (United States)

    Robert C. Abt; Frederick W. Cubbage; Karen L. Abt

    2009-01-01

    While timber supply modeling has been of importance in the wood-producing regions of the United States for decades, it is only more recently that the technology and data have allowed disaggregation of supply and demand to substate regions, including product specific breakdowns and endogenous land use and plantation changes. Using southwide data and an economic supply...

  16. An Ethnobotanical Survey on Fuel Wood and Timber plant Species ...

    African Journals Online (AJOL)

    Yomi

    2011-12-19

    Dec 19, 2011 ... 3Department of Botany, Post Graduate College Abbottabad, Pakistan. Accepted 17 March, 2011. A survey was conducted to explore the fuel wood species and timber producing species of Kaghan valleys, Pakistan. Consumption pattern and impact on the forest resources were also taken into consideration.

  17. Essays on the economics of British Columbian timber policy

    NARCIS (Netherlands)

    Niquidet, Kurt

    2007-01-01

    This thesis examines the process of institutional change in British Columbia’s timber sector. It is composed of a series of essays which highlight the underlying political and economic factors that have shaped past and current reforms. Taking center stage in the analysis, are the resource rents

  18. Forest ecosystem services: Provisioning of non-timber forest products

    Science.gov (United States)

    James L. Chamberlain; Gregory E. Frey; C. Denise Ingram; Michael G. Jacobson; Cara Meghan Starbuck Downes

    2017-01-01

    The purpose of this chapter is to describe approaches to calculate a conservative and defensible estimate of the marginal value of forests for non-timber forest products (NTFPs). 'Provisioning" is one of four categories of benefits, or services that ecosystems provide to humans and was described by the Millennium Ecosystem Assessment as 'products...

  19. Pennsylvania hardwood timber bridges : field performance after 10 years

    Science.gov (United States)

    James P. Wacker; Carlito Calil

    2004-01-01

    Several hardwood demonstration timber bridges were built by the Pennsylvania Department of Transportation in the early nineteen nineties. These bridge superstructures are of the recently developed stress-laminated deck design-type using Red Oak lumber laminations that were pressure-treated with creosote preservatives. This paper will describe the data acquisition...

  20. The Effect of Urban Sprawls on Timber Harvesting

    Science.gov (United States)

    Stephen A. Barlow; Ian A Munn; David A. Cleaves; David L. Evans

    1998-01-01

    In Mississippi and Alabama, urban population growth is pushing development into rural areas. To study the impact of urbanization on timber harvesting, census and forest inventory data were combined in a geographic information system, and a logistic regression model was used to estimate the relationship between several variables and harvest probabilities....

  1. Timber resource of Michigan's Southern Lower Peninsula Unit, 1980.

    Science.gov (United States)

    Jerold T. Hahn

    1982-01-01

    The fourth inventory of the timber resource of Michigan's Southern Lower Peninsula Survey Unit shows a 12% decline in commercial forest area and a 26% gain in growing-stock volume between 1966 and 1980. Presented are highlights and statistics on area, volume, growth, mortality, removals, utilization, and biomass.

  2. Chapter 4: Lateral design of cross-laminated timber buildings

    Science.gov (United States)

    John W. van de Lindt; Douglas Rammer; Marjan Popovski; Phil Line; Shiling Pei; Steven E. Pryor

    2013-01-01

    Cross-laminated timber (CLT) is an innovative wood product that was developed approximately two decades ago in Europe and has since been gaining in popularity. Based on the experience of European researchers and designers, it is believed that CLT can provide the U.S. market the opportunity to build mid- and high-rise wood buildings. This Chapter presents a summary of...

  3. Finite element analysis of composite concrete-timber beams

    Directory of Open Access Journals (Sweden)

    N. C. S. FORTI

    Full Text Available AbstractIn the search for sustainable construction, timber construction is gaining in popularity around the world. Sustainably harvested wood stores carbon dioxide, while reforestation absorbs yet more CO2. One technique involves the combination of a concrete slab and a timber beam, where the two materials are assembled by the use of flexible connectors. Composite structures provide reduced costs, environmental benefits, a better acoustic performance, when compared to timber structures, and maintain structural safety. Composite structures combine materials with different mechanical properties. Their mechanical performance depends on the efficiency of the connection, which is designed to transmit shear longitudinal forces between the two materials and to prevent vertical detachment. This study contributes with the implementation of a finite element formulation for stress and displacement determination of composite concrete-timber beams. The deduced stiffness matrix and load vector are presented along to numerical examples. Numerical examples are compared to the analytical equations available in Eurocode 5 and to experimental data found in the literature.

  4. Emissions from prescribed burning of timber slash piles in Oregon.

    Science.gov (United States)

    Emissions from burning piles of post-harvest timber slash (Douglas fir) in Grande Ronde, Oregon were sampled using an instrument platform lofted into the plume using a tether-controlled aerostat or balloon. Emissions of carbon monoxide, carbon dioxide, methane, particulate matte...

  5. Timber resource of Wisconsin's Northwest Survey Unit, 1983.

    Science.gov (United States)

    W. Brad Smith

    1984-01-01

    The fourth inventory of the timber resource of the Northwest Wisconsin Survey Unit shows a 1.8% decline in commercial forest area and a 36% gain in growing-stock volume between 1968 and 1983. Presented are highlights and statistics on area, volume, growth, mortality, removals, utilization, and biomass.

  6. Smart timber bridge on geosynthetic reinforced soil (GRS) abutments

    Science.gov (United States)

    Adam Senalik; James P. Wacker; Travis K. Hosteng; John Hermanson

    2017-01-01

    Recently, Buchanan County, Iowa, has cooperated with the U.S. Federal Highway Administration (FHWA), USDA Forest Service, Forest Products Laboratory (FPL), and Iowa State University’s Bridge Engineering Center (ISU–BEC) to initiate a project involving the construction and monitoring of a glued-laminated (glulam) timber superstructure on geosynthetic reinforced soil (...

  7. The privately owned timber resources of western Oregon.

    Science.gov (United States)

    Donald R. Gedney

    1983-01-01

    Timber resource statistics from a 1973-76 inventory are presented for private timberland in western Oregon. Inventories usually classify private owners as either forest industry or nonindustrial private. For this report, however, the nonindustrial private classification has been further disaggregated into farmer, individual, and corporate owners. For all private owner...

  8. TRIM timber projections: an evaluation based on forest inventory measurements.

    Science.gov (United States)

    John R. Mills

    1989-01-01

    Two consecutive timberland inventories collected from permanent plots in the natural pine type in North Carolina were used to evaluate the timber resource inventory model (TRIM). This study compares model predictions with field measurements and examines the effect of inventory data aggregation on the accuracy of projections. Projections were repeated for two geographic...

  9. Non-timber forest products in sustainable forest management

    Science.gov (United States)

    James L. Chamberlain; A.L. Hammett; Philip A. Araman

    2001-01-01

    The forests of Southern United States are the source of many non-timber forest products (NTFPs). The collection, trade and use of these products have been important to rural economies since Europeans settled in this country. At the same time the plants from which these products originate are crucial to healthy ecosystems. Over the last decade, the market demand and the...

  10. 36 CFR 223.85 - Noncompetitive sale of timber.

    Science.gov (United States)

    2010-07-01

    ... further advertisement, at not less than appraised value, any timber previously advertised for competitive... degradation or resource damage, or as the result of administrative appeals, litigation, or court orders... any applicable appeals or objection process has been completed may be considered for replacement...

  11. Modeling ground-based timber harvesting systems using computer simulation

    Science.gov (United States)

    Jingxin Wang; Chris B. LeDoux

    2001-01-01

    Modeling ground-based timber harvesting systems with an object-oriented methodology was investigated. Object-oriented modeling and design promote a better understanding of requirements, cleaner designs, and better maintainability of the harvesting simulation system. The model developed simulates chainsaw felling, drive-to-tree feller-buncher, swing-to-tree single-grip...

  12. an assessment of timber trees producing valuable fruits and seeds ...

    African Journals Online (AJOL)

    User

    It is observed that most of the timber trees producing valuable fruits and seeds have low ... sector of the economy by providing major raw materials (saw logs, ... the trees also produce industrial raw materials like latex, ... villagers while avoiding some of the ecological costs of ..... enzymes of rats with carbon tetrachloride.

  13. Marketing of Non-Timber Forest Products in Kajola Local ...

    African Journals Online (AJOL)

    Marketing of Non-Timber Forest Products in Kajola Local Government Area of Oyo State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The results of the marketing margin reveal that charcoal commanded the highest margin of ₦2500, followed by bush meat (₦300), while wrapping had the ...

  14. probabilistic evaluation of eur robabilistic evaluation of eur a timber

    African Journals Online (AJOL)

    eobe

    than steel or concrete [13]. Fire is an emotive sub ... Kaura1, I. Abubakar2, U. Hassan3 and I. Aliyu4 ... portal frame in fire is the failure of the rafter-column connection that re column ...... Thin-webbed Timber Beams”, Asian Journal of Civil.

  15. 36 CFR 261.6 - Timber and other forest products.

    Science.gov (United States)

    2010-07-01

    ... such product is identified as required in such permit or contract. (f) Selling or exchanging any timber... 74 FR 26091, June 1, 2009, the amendment was delayed indefinitely. For the convenience of the user..., memorandum of agreement, memorandum of understanding, or personal-use authorization (f) Selling or exchanging...

  16. Self-extinguishment of cross-laminated timber

    NARCIS (Netherlands)

    Crielaard, R.; van de Kuilen, J.W.G.; Terwel, K.C.; Ravenshorst, G.J.P.; Steenbakkers, P.; Breunesse, A.

    2016-01-01

    Cross-laminated timber, or CLT, is receiving attention for its potential use in tall buildings. As a combustible material, one of the challenges for the construction of these buildings is the fire risk that results from its use in the structure. Unprotected CLT can burn along with the fuel load

  17. Supply and demand of timber for wood turning in Maine

    Science.gov (United States)

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

    1987-01-01

    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  18. 36 CFR 223.187 - Determinations of unprocessed timber.

    Science.gov (United States)

    2010-07-01

    ... generally recognized by the industry as setting a selling standard; and, (ii) A statement by the... setting a selling standard. (3) Lumber, construction timbers, or cants for remanufacture, except western... or better, with a maximum cross section of 2,000 square centimeters (310 square inches) for any...

  19. Chapter 5: Connections Connections in cross-laminated timber buildings

    Science.gov (United States)

    Mohammad Mohammad; Bradford Douglas; Douglas Rammer; Steven E. Pryor

    2013-01-01

    The light weight of cross-laminated timber (CLT) products combined with the high level of prefabrication involved, in addition to the need to provide wood-based alternative products and systems to steel land concrete, have significantly contributed to the development of CLT products and systems, especially in mid-rise buildings (5 to 9 stories). While this product is...

  20. Chapter 1: CLT Introduction to cross-laminated timber

    Science.gov (United States)

    Sylvan Gagnon; E.M.(Ted) Bilek; Lisa Podesto; Pablo Crespell

    2013-01-01

    Cross-laminated timber ( CLT), a new generation of engineered wood product developed initially in Europe, has been gaining increased popularity in residential and non-residential applications in several countries. Many impressive low- and mid-rise buildings built around the world using CLT showcase the many advantages this product has to offer to the construction...

  1. Timber beams loaded perpendicular to grain by multiple connections

    NARCIS (Netherlands)

    Leijten, A.J.M.; Schoenmakers, J.C.M.

    2014-01-01

    In timber structures, beams which are loaded perpendicular to grain by connections along the span may fail by splitting, resulting in the collapse of the beam. In the past, empirical, semi-empirical and fracture mechanical models have been developed aiming at predicting the splitting failure load.

  2. Determining modulus of elasticity of ancient structural timber

    Science.gov (United States)

    Houjiang Zhang; Lei Zhu; Yanliang Sun; Xiping Wang; Haicheng Yan

    2011-01-01

    During maintenance of ancient timber architectures, it is important to determine mechanical properties of the wood component materials non-destructively and effectively, so that degraded members may be replaced or repaired to avoid structural failure. Experimental materials are four larch (Larix principis-rupprechtii Mayr.) components, which were taken down from the...

  3. Timber market research, private forests, and policy rhetoric

    Science.gov (United States)

    David N. Wear; Jeffrey P. Prestemon

    2004-01-01

    The development of the profession and practice of forestry in the United States can be linked to urgent concerns regarding timber shortages in the late 19th century (Williams 1989). These were based largely on perceived failures of forest landowners to protect or invest enough in the productive capacity of their forests (Manthy 1977). The South, as the only major...

  4. Forest soil biology-timber harvesting relationships: a perspective

    Science.gov (United States)

    M. F. Jurgensen; M. J. Larsen; A. E. Harvey

    1979-01-01

    Timber harvesting has a pronounced effect on the soil microflora by wood removal and changing properties. This paper gives a perspective on soil biology-harvesting relationships with emphasis on the northern Rocky Mountain region. Of special significance to forest management operations are the effects of soil micro-organisms on: the availability of soil nutrients,...

  5. Idaho's forest products industry and timber harvest, 2011

    Science.gov (United States)

    Eric A. Simmons; Steven W. Hayes; Todd A. Morgan; Charles E. Keegan; Chris Witt

    2014-01-01

    This report traces the flow of Idaho’s 2011 timber harvest through the primary industries; provides a description of the structure, capacity, and condition of Idaho’s industry; and quantifies volumes and uses of wood fiber. Historical wood products industry trends are discussed, as well as changes in harvest, production, employment, and sales.

  6. Effects of timber harvest following wildfire in western North America

    Science.gov (United States)

    David L. Peterson; James K. Agee; Gregory H. Aplet; Dennis P. Dykstra; Russell T. Graham; John F. Lehmkuhl; David S. Pilliod; Donald F. Potts; Robert F. Powers; John D. Stuart

    2009-01-01

    Timber harvest following wildfire leads to different outcomes depending on the biophysical setting of the forest, pattern of burn severity, operational aspects of tree removal, and other management activities. Fire effects range from relatively minor, in which fire burns through the understory and may kill a few trees, to severe, in which fire kills most trees and...

  7. A Computer Program to Evaluate Timber Production Investments Under Uncertainty

    Science.gov (United States)

    Dennis L. Schweitzer

    1968-01-01

    A computer program has been written in Fortran IV to calculate probability distributions of present worths of investments in timber production. Inputs can include both point and probabilistic estimates of future costs, prices, and yields. Distributions of rates of return can also be constructed.

  8. Strength and stiffness capacity utilisation of timber members in roof ...

    African Journals Online (AJOL)

    C Brand Wessels, Nils-Olaf Petersen. Abstract. The main objective of this study was to determine which property, of the six strength and stiffness properties used in structural timber design, was the most influential in the design of nail-plated roof trusses. Thirty recently completed nail-plated roof truss designs were randomly ...

  9. The Four Corners timber harvest and forest products industry, 2012

    Science.gov (United States)

    Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

    2016-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

  10. The Four Corners timber harvest and forest products industry, 2007

    Science.gov (United States)

    Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

    2012-01-01

    This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

  11. Gender analysis of non-timber forest products (NTFPs) collection ...

    African Journals Online (AJOL)

    Millions of people, especially those living in rural areas in developing countries collect Non-Timber Forest products (NTFPs) daily. Women are known to play a prominent role in forestry and agricultural production in Nigeria despite not been captured as economically productive. This work looked into gender dimension ...

  12. 25 CFR 163.23 - Advance payment for timber products.

    Science.gov (United States)

    2010-04-01

    ... contracts. However, no advance payment will be required that would make the sum of such payment and of... required, advance payments will operate the same as provided for in § 163.23(a) of this part. ... 25 Indians 1 2010-04-01 2010-04-01 false Advance payment for timber products. 163.23 Section 163...

  13. Contribution of timber exports to economic growth in Nigeria: an ...

    African Journals Online (AJOL)

    The paper examined the contribution of timber exports to the economic growth in Nigeria, using an econometric approach. Augmented Dickey-Fuller (ADF) and Johansen Co-integration techniques were respectively used to test for unit root and examine the relationship between the variables used. In addition, Granger ...

  14. ECOLOGICAL EFFECT OF TIMBER EXPRACTION IN OHIMINI LGA ...

    African Journals Online (AJOL)

    Shima

    as Indonesia, Thailand, Malaysia, ... reduced biodiversity (Wikipedia, 2007). In many countries massive timber extraction is ongoing and is shaping climate and geography. logging affects the amount of water in the soil and groundwater and the moisture in the atmosphere. Forests support considerable biodiversity, providing.

  15. How to establish, maintain and use timber depletion accounts

    Science.gov (United States)

    William C. Siegel

    2001-01-01

    Section 1221 of the Internal Revenue Code defines capital expenditures. In general, these are amounts spent to acquire real estate or equipment, or to make improvements that increase the value of real estate or equipment already owned. Forestry examples include land, buildings, standing timber, reforestation costs, and tractors and trucks. Property owners who incur...

  16. Timber resource statistics for the Sacramento resource area of California.

    Science.gov (United States)

    Karen L. Waddell; Patricia M. Bassett

    1997-01-01

    This report is a summary of timber resource statistics for the Sacramento Resource Area of California, which includes Butte, Colusa, El Dorado, Glenn, Lake, Napa, Nevada, Placer, Plumas, Sacramento, Sierra, Sutter, Tehama, Yolo, and Yuba Counties. Data were collected as part of a statewide multiresource inventory. The inventory sampled private and public lands except...

  17. Timber resource statistics for Washington, January 1, 1973.

    Science.gov (United States)

    Patricia M. Bassett; Grover A. Choate

    1974-01-01

    Timber resource statistics to January 1, 1973, for the State of Washington show total land area, commercial timberland area, and growing stock and sawtimber inventory volumes by county and owner group. Growth and removals are shown by Forest Survey inventory unit for 1972. Each National Forest is updated to January 1, 1973.

  18. Timber resource statistics for Oregon, January 1, 1973.

    Science.gov (United States)

    Patricia M. Bassett; Grover A. Choate

    1974-01-01

    Timber resource statistics as of January 1, 1973, for the State of Oregon show total land area, commercial timberland area, and growing stock and sawtimber inventory volumes by county and owner group. Growth and removals are shown by Forest Survey inventory unit for 1972. Each National Forest is updated to January 1, 1973, as well as each Bureau of Land Management...

  19. Harvest choice and timber supply models for forest forecasting

    Science.gov (United States)

    Maksym Polyakov; David N Wear

    2010-01-01

    Timber supply has traditionally been modeled using aggregate data, whereas individual harvest choices have been shown to be sensitive to the vintage and condition of forest capital stocks. In this article, we build aggregate supply models for four roundwood products in a seven-state region of the US South directly from stand-level harvest choice models applied to...

  20. Building aggregate timber supply models from individual harvest choice

    Science.gov (United States)

    Maksym Polyakov; David N. Wear; Robert Huggett

    2009-01-01

    Timber supply has traditionally been modelled using aggregate data. In this paper, we build aggregate supply models for four roundwood products for the US state of North Carolina from a stand-level harvest choice model applied to detailed forest inventory. The simulated elasticities of pulpwood supply are much lower than reported by previous studies. Cross price...

  1. Forest management planning for timber production: a sequential approach

    Science.gov (United States)

    Krishna P. Rustagi

    1978-01-01

    Explicit forest management planning for timber production beyond the first few years at any time necessitates use of information which can best be described as suspect. The two-step approach outlined here concentrates on the planning strategy over the next few years without losing sight of the long-run productivity. Frequent updating of the long-range and short-range...

  2. An Ethnobotanical Survey on Fuel Wood and Timber plant Species ...

    African Journals Online (AJOL)

    A survey was conducted to explore the fuel wood species and timber producing species of Kaghan valleys, Pakistan. Consumption pattern and impact on the forest resources were also taken into consideration. A questionnaire was used as a survey instrument to obtain desired data. For this study, 10 villages were randomly ...

  3. [Nutrient transfer and growth of Pinus greggii Engelm. inoculated with edible ectomycorrhizal mushrooms in two substrates].

    Science.gov (United States)

    Rentería-Chávez, María C; Pérez-Moreno, Jesús; Cetina-Alcalá, Víctor M; Ferrera-Cerrato, Ronald; Xoconostle-Cázares, Beatriz

    An ectomycorrhiza is a mutualistic symbiosis of paramount importance in forestry and tree production. One of the selection criteria of ectomycorrhizal fungi that has currently gained importance is their edibility due to the economic, ecological and cultural relevance of edible ectomycorrhizal mushrooms as a non-timber forest product. The effect of the inoculation with three edible ectomycorrhizal mushrooms: Laccaria laccata, Laccaria bicolor y Hebeloma leucosarx, which are widely sold in Mexico, on the growth and nutrient contents of Pinus greggii grown in an experimental substrate and a commercial substrate enriched with a slow-release fertilizer, was evaluated. Two years after sowing, differences in terms of shoot and root biomass and macro and micronutrient contents between inoculated and non-inoculated plants, were recorded independently of the fungal species and the substrate. Despite the fact that plants grown in the commercial substrate had higher growth and nutrient contents, their ectomycorrhizal colonization percentages were smaller than those of the plants grown in the experimental substrate. The differences in the nutrient transfer to the inoculated plant shoots among the evaluated fungal species were recorded. Ca mobilization by L. laccata, Na by L. bicolor and Mn by H. leucosarx were observed in the plants growing in the experimental substrate. It has been demonstrated that the selection of substrates constitutes an important factor in the production of ectomycorrhizal plants and that the three evaluated species of edible ectomycorrhizal mushrooms have an enormous potential in the controlled mycorrhization of P. greggii. Copyright © 2017 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. Total Weight and Axle Loads of Truck Units in the Transport of Timber Depending on the Timber Cargo

    Directory of Open Access Journals (Sweden)

    Grzegorz Trzciński

    2018-03-01

    Full Text Available When transporting timber, the high variability of species, assortments and moisture content of the wood raw material does not allow the weight of the transported timber to be precisely determined. This often contributes to the excessive weight loading of the entire truck unit. The aim of the research is to present the variability of the total weight of truck units with wood cargoes (GVW—gross vehicle weight depending on the weight of the empty unit and the transported timber load, as well as to analyze the changes in GVW, unit loads of wood and load on individual truck unit axles depending on the season. This study analyzes the total weight of truck units for 376 transports of Scots pine timber at different times of the year. The total weight of the truck units depends on the weight of an empty unit and the weight of the load. GVW was determined by using a weighbridge to weigh the vehicles and then the empty unit after unloading. The weight of the load was obtained as the difference between GVW and the tare. It was found that GVW differed significantly depending on the truck unit used, ranging from 43.60–58.80 Mg, often exceeding permissible limits for public roads. The individual axle loads for various truck units were also analyzed. The obtained results indicate that these loads are more equally distributed in the case of five-axle trucks compared to six-axle ones.

  5. Effect of (/sup 60/cobalt) gamma rays on growth and root rot diseases in mungbean (vigna radiata L.)

    International Nuclear Information System (INIS)

    Ikram, N.; Dawar, S.; Zaki, M.J.; Abass, Z.

    2010-01-01

    Present investigation showed that gamma rays influences suppressive effect on root rot fungi such as Macrophomina phaseolina (Tassi) Goid, Rhizoctonia solani Kuhn and Fusarium spp., and inducive effect on growth parameters of mung bean (Vigna radiata L.). Seeds of mung bean were treated with gamma rays (/sup 60/Cobalt) at time periods of 0 and 4 minutes and stored for 90 days at room temperature to determine its effect on growth parameters and infection of root infecting fungi. All treatments of gamma rays enhanced the growth parameters as compared to untreated plants. Infection of M. phaseolina, R. solani and Fusarium spp., were significantly decreased on mung bean seeds treated with gamma rays. Gamma rays significantly increased the growth parameters and controlled the root rot fungi up to 90 days of storage of seeds. (author)

  6. Biofertilizing efficiency of Sargassum polycystum extract on growth and biochemical composition of Vigna radiata and Vigna mungo

    Directory of Open Access Journals (Sweden)

    B Bharath

    2018-01-01

    Full Text Available Objective: To evaluate the effect of marine brown alga Sargassum polycystum extract on growth and biochemical parameters of Vigna radiata and Vigna mungo.Methods: Different concentrations of algal extracts (0.5%, 1.0%, 2.0%, 3.0%, 4.0%, and 5.0% were prepared and applied to the crops at every 10-day intervals under natural conditions. After 30 d, the plants were harvested to evaluate the growth and biochemical parameters.Results: Seaweed liquid fertilizers treated seedlings showed maximum growth in 3.0% concentration when compared to the untreated seedlings. Similarly, biochemical parameters such as photosynthetic pigments, protein, reducing sugar, total sugar and amino acids exhibited increases in 3.0% concentration seaweed extract. Decreases in growth and biochemical parameters were noticed in concentrations higher than 3.0%.Conclusions: Presence of micronutrients and growth regulating substances in the liquid extract help healthier and faster productivity of the crop.

  7. Fire effects in Pinus uncinata Ram plantations

    Energy Technology Data Exchange (ETDEWEB)

    Cardil Forradellas, A.; Molina Terrén, D.M.; Oliveres, J.; Castellnou, M.

    2016-07-01

    Aim of study: Understanding fire ecology of main forest species is essential for a sound, scientifically based on managing of wildlands and also to assess likely implications due to changes in fire regime under a global change scenario. Few references can be found about fire ecology of Pinus uncinata Ram. (PU). PU species grows in the Central Pyrenees where large, severe wildland fires did not occur frequently in the past. However, several fires with extreme fire behavior have affected PU stands in last years and they might disturb other PU forest in the future. Area of study: Cabdella fire (February 2012), in Lleida province, is one of the several wildland fires occurred in 2012 (winter season) in the Central Pyrenees. Fire affected a large PU plantation (102 ha) located at 1.800-2,100 meters above the sea. Material and methods: We have analyzed first order fire effects in three fireline intensity thresholds along three years in terms of mortality ratio, scorched height, percentage of scorched crown volume and bark char height. Main results: PU seems to be a very tolerant species to low and medium fire line intensity but fire effects were very significant when fire line intensity was high. In medium fireline intensity sites, probability of mortality ranged from 15 to 30% and the dead trees had the highest values on scorched height and percentage of scorched crown volume. Research highlights: Results from this work supports that prescribed burning might be used to efficiently decrease fuel load and fuel vertical continuity while avoiding considerable PU mortality. It also displayed that when fuel management has been implemented, PU mortality might be limited even under extreme fire behavior. (Author)

  8. Relationship between diffusion tensor fractional anisotropy and motor outcome in patients with hemiparesis after corona radiata infarct.

    Science.gov (United States)

    Koyama, Tetsuo; Marumoto, Kohei; Miyake, Hiroji; Domen, Kazuhisa

    2013-11-01

    This study examined the relationship between fractional anisotropy (FA) values of magnetic resonance-diffusion tensor imaging (DTI) and motor outcome (1 month after onset) in 15 patients with hemiparesis after ischemic stroke of corona radiata lesions. DTI data were obtained on days 14-18. FA values within the cerebral peduncle were analyzed using a computer-automated method. Motor outcome of hemiparesis was evaluated according to Brunnstrom stage (BRS; 6-point scale: severe to normal) for separate shoulder/elbow/forearm, wrist/hand, and lower extremity functions. The ratio of FA values in the affected hemisphere to those in the unaffected hemisphere (rFA) was assessed in relation to the BRS data (Spearman rank correlation test, P<.05). rFA values ranged from .715 to 1.002 (median=.924). BRS ranged from 1 to 6 (median=4) for shoulder/elbow/forearm, from 1 to 6 (median=5) for wrist/hand, and from 2 to 6 (median=4) for the lower extremities. Analysis revealed statistically significant relationships between rFA and upper extremity functions (correlation coefficient=.679 for shoulder/elbow/forearm and .706 for wrist/hand). Although slightly less evident, the relationship between rFA and lower extremity function was also statistically significant (correlation coefficient=.641). FA values within the cerebral peduncle are moderately associated with the outcome of both upper and lower extremity functions, suggesting that DTI may be applicable for outcome prediction in stroke patients with corona radiata infarct. Copyright © 2013 National Stroke Association. Published by Elsevier Inc. All rights reserved.

  9. Halopriming of seeds imparts tolerance to NaCl and PEG induced stress in Vigna radiata (L.) Wilczek varieties.

    Science.gov (United States)

    Jisha, K C; Puthur, Jos T

    2014-07-01

    The investigation was carried out to study the effect of halopriming on NaCl and polyethylene glycol-6000 (PEG-6000) induced stress tolerance potential of three Vigna radiata (L.) Wilczek varieties, with varied abiotic stress tolerance potential. Halopriming is a seed priming technique in which the seeds were soaked in various salt solutions (in this study NaCl was used). The results of the study indicated that the application of stresses (both NaCl and PEG) induced retardation of growth attributes (measured in terms of shoot length, fresh weight, dry weight) and decrease in physiological attributes like total chlorophyll content, metabolites, photosynthetic and mitochondrial activity of the seedlings in all three V. radiata (L.) varieties. However, halopriming of the seeds could reduce the extent of decrease in these biological attributes. NaCl and PEG stress also caused increase in MDA content (a product of membrane lipid peroxidation) in all the varieties studied and this increase was significantly minimized under halopriming. From the present investigation it was evident that among the green gram varieties studied, Pusa Vishal, a NaCl tolerant variety showed enhanced tolerance to NaCl and PEG induced stress, when the seeds were subjected to halopriming followed by Pusa Ratna (stress sensitive variety). Pusa 9531 (drought tolerant variety) also showed positive halopriming effects but it was less significant when compared to other two varieties. It could be concluded that halopriming improved the drought and salinity stress tolerance potential of all varieties and it was significantly higher in the Pusa Vishal as compared to Pusa 9531 and Pusa Ratna.

  10. Expanding the repertoire of microsatellite markers for polymorphism studies in Indian accessions of mung bean (Vigna radiata L. Wilczek).

    Science.gov (United States)

    Shrivastava, Divya; Verma, Priyanka; Bhatia, Sabhyata

    2014-09-01

    Limited availability of validated, polymorphic microsatellite markers in mung bean (Vigna radiata), an important food legume of India, has been a major hurdle towards its improvement and higher yield. The present study was undertaken in order to develop a new set of microsatellite markers and utilize them for the analysis of genetic diversity within mung bean accessions from India. A GA/CT enriched library was constructed from V. radiata which resulted in 1,250 putative recombinant clones of which 850 were sequenced. SSR motifs were identified and their flanking sequences were utilized to design 328 SSR primer pairs. Of these, 48 SSR markers were employed for assessing genetic diversity among 76 mung bean accessions from various geographical locations in India. Two hundred and thirty four alleles with an average of 4.85 alleles per locus were detected at 48 loci. The polymorphic information content (PIC) per locus varied from 0.1 to 0.88 (average: 0.49 per locus). The observed and expected heterozygosities ranged from 0.40 to 0.95 and 0.40 to 0.81 respectively. Based on Jaccard's similarity matrix, a dendrogram was constructed using the unweighted pair-group method with arithmetic averages (UPGMA) analysis which revealed that one accession from Bundi, Rajasthan was clustered out separately while remaining accessions were grouped into two major clusters. The markers generated in this study will help in expanding the repertoire of the available SSR markers thereby facilitating analysis of genetic diversity, molecular mapping and ultimately broadening the scope for genetic improvement of this legume.

  11. Interdependence of plant water status with photosynthetic performance and root defense responses in Vigna radiata (L.) Wilczek under progressive drought stress and recovery.

    Science.gov (United States)

    Sengupta, Debashree; Guha, Anirban; Reddy, Attipalli Ramachandra

    2013-10-05

    The present study investigates the interdependence of plant water status with foliar and root responses in Vigna radiata L.Wilczek under progressive drought. Vegetatively-mature V. radiata plants were subjected to water withdrawal for 3 and 6days (D3 and D6, respectively) and then re-watered subsequently for 6days (6R) for stress-recovery. Changes in plant water status were expressed in terms of leaf and root moisture contents (LMC and RMC, respectively) and leaf relative water content (LRWC). Progressive drought caused apparent decrease in LRWC, LMC and RMC depicting significant level of dehydration of leaf and root tissues. Stomatal limitation alone could not account for the observed decrease in net CO2 assimilation rates (Pn) due to comparatively less decrease in sub-stomatal CO2 (Ci) concentrations with respect to other gas exchange parameters indicating possible involvement of non-stomatal limitations. Analysis of polyphasic chl a fluorescence kinetics during progressive drought showed decreased energy connectivity among PSII units as defined by a positive L-band with highest amplitude during D6. Efficiency of electron flux from OEC towards PSII acceptor side was not significantly affected during drought conditions as evidenced by the absence of a positive K-band. Increasing root-level water-limitation enforced a gradual oxidative stress through H2O2 accumulation and membrane lipid peroxidation in V. radiata roots exhibiting drastic enhancement of proline content and a significant but gradual increase in ascorbic acid content as well as guaiacol peroxidase activity under progressive drought. Expression analysis of Δ(1) pyrroline-5-carboxylate synthetase (P5CS) through real time PCR and enzyme activity studies showed a strong positive correlation between VrP5CS gene expression, enzyme activity and proline accumulation in the roots of V. radiata under progressive drought and recovery. Drought-induced changes in root moisture content (RMC) showed positive linear

  12. PRODUÇÃO DE CHAPAS DE MADEIRA COMPENSADA DE CINCO ESPÉCIES DE PINUS TROPICAIS

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2001-03-01

    Full Text Available Este trabalho teve como objetivo avaliar o potencial de utilização de 5 espécies de pinus tropicais para produção de painéis compensados. As espécies estudadas foram: Pinus caribaea, Pinus chiapensis, Pinus maximinoi, Pinus oocarpa, Pinus tecunumannii e Pinus taeda, sendo esta última espécie como testemunha. Foram produzidos compensados de 5 lâminas com resinas uréia-formaldeído e fenol-formaldeído. Os resultados de inchamento e recuperação em espessura foram estatisticamente iguais entre as espécies estudadas, com exceção para inchamento em espessura das chapas coladas com resina fenol-formaldeído. As chapas de Pinus maximinoi e Pinus oocarpa, apresentaram melhores resultados de módulos de elasticidade. Para o módulo de ruptura, as chapas de Pinus maxininoi, Pinus oocarpa e Pinus taeda, coladas com resina fenol-formaldeído, apresentaram valores estatisticamente superiores em relação às demais espécies. Quanto a resistência da linha de cola, as chapas de Pinus maximinoi, Pinus taeda e Pinus chiapensis, foram as que apresentaram melhor desempenho. Com base nos resultados gerais da pesquisa, pode-se destacar a potencialidade da madeira de Pinus maximinoi e Pinus oocarpa para produção de chapas de madeira compensada.

  13. Historic timber skeleton structures and the local seismic culture

    Science.gov (United States)

    Bostenaru, M.

    2009-04-01

    This presentation deals with the employment of timber skeleton structure and the local seismic culture. After the 1755 earthquake in the reconstruction of Lisbon a type of building with timber skeleton and masonry infill called "gaiola pombalina" was promoted, since this was designed to better resists earthquakes. "Gaiola" means cage, and it was also named after the Marques de Pombal who introduced it in the reconstruction following the earthquake. The „gaiola pombalina" presents a timber skeleton with Saint Andrew crosses in the interior walls with masonry infill and thick masonry load bearing walls loosing in thickness to the upper floors in the exterior walls. The masonry can fall out during earthquakes but the building remains staying given the interior timber skeleton. The type of buildings with timber structure and (masonry) infill behaved well in earthquakes in various parts of the earth, like Nepal (the dhaji dewary type), Pakistan, Turkey (the himiş type after the 1999 earthquake) [both latter types were researched by Langenbach, www.conservationtech.com and www.traditional-is-modern.net] and also in Germany after the 1356 earthquake (the Southern German subtype of Fachwerk). Also in Italy a subtype called "casa baraccata" was promoted in a construction code to a similar time (following the 1783 earthquake in Southern Italy, see Tobriner 1983) as that of the "gaiola pombalina", the time of the Baroque, when town planning acquired another status. Unlike at the "gaiola pombalina" the "casa baraccata" the timber skeleton is at the exterior walls. For this reason this type of buildings is considered to be an expression of the local seismic culture. However, this type of buildings is common also for areas where seismic risk is not an issue, like half-timbered in England and the northern subtype of Fachwerk in Northern Germany, and in some high seismic risk regions with mountains and timber resources like Romania is not spread. Given these premises the author

  14. Metodologia para o cálculo dos módulos de elasticidade longitudinal e transversal em vigas de madeira de dimensões estruturais Methodology used to determine the shear and longitudinal modulus of elasticity in timber beams

    Directory of Open Access Journals (Sweden)

    André Luis Christoforo

    2013-04-01

    Full Text Available Este trabalhou objetiva apresentar uma metodologia analítica para o cálculo dos módulos de elasticidade longitudinal (E e transversal (G em vigas de madeira de dimensões estruturais, segundo o emprego das teorias de vigas de Euler Bernoulli e Timoshenko, sendo utilizado o ensaio de flexão estática a três pontos. As madeiras testadas foram o Pinus elliottii e a Corymbia citriodora. Os resultados encontrados relevaram ser o módulo de elasticidade longitudinal 18,70 vezes superior ao módulo transversal do Pinus elliottii e 21,2 superior ao módulo transversal do Corymbia citriodora, sendo estes compatíveis quando comparada a relação entre E e G estabelecida pela norma Brasileira ABNT NBR 7190:1997 (Projeto de Estruturas de Madeira, que define ser o módulo de elasticidade longitudinal vinte vezes superior ao transversal.This paper proposed a test method to obtain the shear (G and longitudinal (E modulus of elasticity in timber beams with structural dimensions, based on the static three-points bending tests and the Euler Bernoulli and Timoshenko beams theories. The woods tested were the Corymbia citriodora and Pinus elliottii. The results revealed that the longitudinal modulus of elasticity of Pinus elliottii is 18.70 greater than the shear modulus, and 21.16 greater than the shear modulus of Corymbia citriodora, being consistent this results when compared to the proposed by the Brazilian standard ABNT NBR 7190:1997 (Design of Wood Structures, being the longitudinal modulus of elasticity twenty times greater than the shear modulus.

  15. Case Studies on Timber Defects of Selected Traditional Houses in Malacca

    Directory of Open Access Journals (Sweden)

    Nor Haniza Ishak

    2007-12-01

    Full Text Available The effect of adverse environmental conditions on building materials and the extent of damage caused depends on both the materials used and the environmental conditions. Although timber is a diminishing resource, it is still widely used in today's construction. In Malaysia, timber is one of the main components of many historic buildings. Appropriate maintenance of such buildings requires an understanding of timber defects and its related problems. Timber defects are classified into two major groups: non-biological and biological deteriorations. Non-biological deterioration consists of physical decay, excessive moisture content, dimensional instability and chemical deterioration. These defects are mainly caused by the timber in service being subjected to environmental exposure. The most common and destructive timber biological deteriorations are those due to dry rot, we t rot as well as insect attacks . A study based on seven selected houses was conducted to identify the most common building defects, specifically on timber components amongst traditional Malay houses in Malacca, Malaysia, A building condition survey was carried out to determine the effect of the environment towards timber buildings and their main components. Data collected were based on the investigation and visual observation of the selected case studies. Findings of this research will serve as an indicator towards maintaining the buildings' timber components in good condition in order that the buildings' life span could be extended and primarily to conserve the valuable traditional timber houses in a historical city.

  16. Hydraulic architecture and tracheid allometry in mature Pinus palustris and Pinus elliottii trees.

    Science.gov (United States)

    Gonzalez-Benecke, C A; Martin, T A; Peter, G F

    2010-03-01

    Pinus palustris Mill. (longleaf pine, LL) and Pinus elliottii Engelm. var. elliottii (slash pine, SL) frequently co-occur in lower coastal plain flatwoods of the USA, with LL typically inhabiting slightly higher and better-drained microsites than SL. The hydraulic architecture and tracheid dimensions of roots, trunk and branches of mature LL and SL trees were compared to understand their role in species microsite occupation. Root xylem had higher sapwood-specific hydraulic conductivity (k(s)) and was less resistant to cavitation compared with branches and trunk sapwood. Root k(s) of LL was significantly higher than SL, whereas branch and trunk k(s) did not differ between species. No differences in vulnerability to cavitation were observed in any of the organs between species. Across all organs, there was a significant but weak trade-off between water conduction efficiency and safety. Tracheid hydraulic diameter (D(h)) was strongly correlated with k(s) across all organs, explaining >73% of the variation in k(s). In contrast, tracheid length (L(t)) explained only 2.4% of the variability. Nevertheless, for trunk xylem, k(s) was 39.5% higher at 20 m compared with 1.8 m; this increase in k(s) was uncorrelated with D(h) and cell-wall thickness but was strongly correlated with the difference in L(t). Tracheid allometry markedly changed between sapwood of roots, trunks and branches, possibly reflecting different mechanical constraints. Even though vulnerability to cavitation was not different for sapwood of roots, branches or the trunks of LL and SL, higher sapwood to leaf area ratio and higher maximum sapwood-specific hydraulic conductivity in roots of LL are functional traits that may provide LL with a competitive advantage on drier soil microsites.

  17. Investigation on chemical composition and optimization of essential oil obtainment from waste Pinus taeda L. using hydrodistillation

    Directory of Open Access Journals (Sweden)

    Sirlei Dias Teixeira

    Full Text Available ABSTRACT: The extraction of essential oils obtained by the hydrodistillation of needles/twigs waste of Pinus taeda L. was optimized by applying response surface methodology (RSM, with 24 full factorial design, in order to improve oil essential production, and aggregate value to the production chain of pine wood. Through the model it was possible to ascertain the influence of the variables in the average amount of essential oil (0.1032 mL, being the variables analyzed: biomass - Bm (x1, extraction time - ET (x2, Bm:ET (x1x2 and sample size - SS: drying times - DT (x3x4. Only linear terms (biomass and extraction time and your interaction demonstrated significant positive values (0.0344, 0.0206 and 0.0131. The major components of the essential oil identified by GC-MS were: β-phellandrene: (30.39 and 22.44%, tricyclene (26.14 and 20.46%, β-myrcene (14.32 and 11.50%, β-pinene (22.49 and 1.43% and α-pinene (0.25 and 11.26% in the years 2011 and 2012, respectively. Our results show that the essential oil obtained from P. taeda represents a way of using some of the waste generated by the timber industry. The process of obtaining doesn't require treatments such as controlled drying or size reduction of the sample, indicating that it can be used in an industrial scale.

  18. CONTROL PROCEDURES OF VOLUME OF ESTIMATED AND HARVESTED WOOD IN A PLANTATION OF Pinus spp. IN PARANÁ STATE

    Directory of Open Access Journals (Sweden)

    Silvane Vatraz

    2014-06-01

    Full Text Available http://dx.doi.org/10.5902/1980509814585The objective of this research was to improve the operating procedures of control of the volume of timber estimated by the forest inventory and the effectively harvested volume in order to reduce inconsistencies in the forest planning practiced in a forestry plantation of Pinus spp. in Paraná state. Accordingly, we used the tools of quality: storming and PDCA Cycle through an exploratory research project to study together. The study showed an inconsistency initial volume – 24,73% of the volume estimated by the inventory and the effectively harvested wood. This inconsistency was composed of operational failures in the activities of Forest Inventory (+13,84%, Forest Harvesting (+15,62% and Expedition Wood (-3,08%. The application of quality tools helped in the identification of inconsistency, as well as the revelation of operational failures, which suggested some routine monitoring and checking each of the activities involved in managing operational forestry.  

  19. Produção de chapas de madeira compensada de cinco espécies de pinus tropicais

    Directory of Open Access Journals (Sweden)

    Setsuo Iwakiri

    2001-01-01

    Full Text Available This research was developed aiming at evaluating the feasibility of the use of 5 species of tropical pine to plywood manufacture. The following species were studied: Pinus caribaea, Pinus chiapensis, Pinus maximinoi, Pinus oocarpa, Pinus tecunumannii and Pinus taeda, being the last used as the referential species. Plywood were manufactured with 5 plies, bonded with ureaformaldheyde and fenol-formaldheyde resin. The results of thickness sweeling and recovering were the same for all species studied, with exception to thickness sweeling for the boards glued with fenolformaldheyde resin. The boards made from Pinus maximinoi and Pinus oocarpa, showed the higher values in modulus of elasticity. The boards of Pinus maximinoi, Pinus oocarpa and Pinus taeda, glued with fenol-formaldheyde resin, resulted in higher values of the modulus of rupture, in comparison to other species. For the glue line strength, the boards of Pinus maximinoi, Pinus taeda and Pinus chiapensis, showed the better results. Based on the general results of this research it, could be said that the Pinus maximinoi and Pinus oocarpa present the high potentiality to plywood manufacture.

  20. Local timber firm looking forward to develop on medium term

    Directory of Open Access Journals (Sweden)

    BUCS Lorant

    2017-01-01

    Full Text Available This article intends to outline the challenges faced by a local timber company in struggle to resist on medium-term on the market. There will be revealed the challenges the company is facing, and also the ways to adapt to the changing world of timber industry. There will be presented a short history of the founding and the evolution of the company on the local and international market, pointing out the relevant events which have marked the life of the company during the years. There will also be presented a short review of the competition on the market and the marketing strategy and policies which the company is using to be able to face the new challenges.