Progress at LAMPF. Progress report, January-December 1985

International Nuclear Information System (INIS)

Allred, J.C.; Talley, B.

1986-05-01

Research performed at LAMPF during 1985 is reported in the areas of: nuclear and particle physics; atomic and molecular physics; materials science; radiation-effects studies; biomedical research and instrumentation; nuclear chemistry; radioisotope production; and physics theory. Also reported are the status of LAMPF-II, facility development work, and accelerator operations

Progress at LAMPF. Progress report, January-December 1985

Energy Technology Data Exchange (ETDEWEB)

Allred, J.C.; Talley, B. (eds.)

1986-05-01

Research performed at LAMPF during 1985 is reported in the areas of: nuclear and particle physics; atomic and molecular physics; materials science; radiation-effects studies; biomedical research and instrumentation; nuclear chemistry; radioisotope production; and physics theory. Also reported are the status of LAMPF-II, facility development work, and accelerator operations. (LEW)

Measurement and modeling of external radiation during 1985 from LAMPF [Los Alamos Meson Physics Facility] emissions

International Nuclear Information System (INIS)

Bowen, B.M.; Olsen, W.A.; Chen, Ili; Van Etten, D.M.

1987-11-01

An array of three portable, pressurized ionization chambers (PICs) continued to measure external radiation levels during 1985 caused by radionuclides emitted from the Los Alamos Meson Physics Facility (LAMPF). A Gaussian-type atmospheric dispersion model, using onsite meteorological and stack release data, was tested during this study. A more complex finite model, which takes into account the contribution of radiation at a receptor from different locations of the passing plume, was also tested. Monitoring results indicate that, as in 1984, a persistent wind up the Rio Grande Valley during the evening and early morning hours is largely responsible for causing the highest external radiation levels to occur to the northeast and north-northeast of LAMPF. However, because of increased turbulent mixing during the day, external radiation levels are generally much less during the day than at night. External radiation levels during 1985 show approximately a 75% reduction over 1984 levels. This resulted from a similar percentage reduction in LAMPF emissions caused by newly implemented emission controls. Comparison of predicted and measured daily external radiation levels indicates a high degree of correlation. The model also gives accurate estimates of measured concentrations over longer time periods. Comparison of predicted and measured hourly values indicates that the model generally tends to overpredict during the day and underpredict at night. 9 refs., 14 figs., 13 tabs

Progress at LAMPF, January--December 1990

International Nuclear Information System (INIS)

Poelakker, K.

1990-01-01

This report briefly discusses research conducted at the Lampf facility in the following areas: nuclear and particle physics; astrophysics; atomic and molecular physics; nuclear chemistry; radiation effects; radioisotopes production; accelerator operations and facility development

Proceedings of the nineteenth LAMPF Users Group meeting

International Nuclear Information System (INIS)

Bradbury, J.N.

1986-02-01

Separate abstracts were prepared for eight invited talks on various aspects of nuclear and particle physics as well as status reports on LAMPF and discussions of upgrade options. Also included in these proceedings are the minutes of the working groups for: energetic pion channel and spectrometer; high resolution spectrometer; high energy pion channel; neutron facilities; low-energy pion work; nucleon physics laboratory; stopped muon physics; solid state physics and material science; nuclear chemistry; and computing facilities. Recent LAMPF proposals are also briefly summarized

The status of LAMPF

International Nuclear Information System (INIS)

Hagerman, D.C.

1976-01-01

LAMPF, the Los Alamos Physics Facility, is a significant advance in the art of linac design, with high duty factor, new types of accelerator structure, and computer control. Operations to date are described. (E.C.B.)

Progress at LAMPF. Clinton P. Anderson Meson Physics Facility, July-December 1981

International Nuclear Information System (INIS)

Allred, J.C.

1982-03-01

Progress at LAMPF is the semiannual progress report of the MP Division of the Los Alamos National Laboratory. The report includes brief reports on research done at LAMPF by researchers from other institutions and Los Alamos divisions

Status of LAMPF

International Nuclear Information System (INIS)

Hagerman, D.C.

1976-01-01

LAMPF is a successful facility serving a wide variety of users at the 100-μA level. The availability of beam is satisfactory and a very large amount of scientific and applied investigation can be carried out with the facility in its present form. The engineering and applied physics problems in increasing the current another factor of ten are formidable but seem amenable to eventual solution

Progress at LAMPF, Clinton P. Anderson Meson Physics Facility, January-December 1984

International Nuclear Information System (INIS)

Allred, J.C.

1985-04-01

Progress at LAMPF is the annual progress report of the MP Division of the Los Alamos National Laboratory. The report includes brief reports on research done at LAMPF by researchers from other institutions and Los Alamos divisions. Abstracts of separate sections of the report were prepared separately for the data base

Clinton P. Anderson Meson Physics Facility and its operational safety program

International Nuclear Information System (INIS)

Putnam, T.M.

1975-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) at the Los Alamos Scientific Laboratory consists of/ (1) a medium-energy, high-intensity linear proton accelerator; (2) experimental areas designed to support a multidisciplined program of research and practical applications; and (3) support facilities for accelerator operations and the experimental program. The high-intensity primary and secondary beams at LAMPF and the varied research program create many interesting and challenging problems for the Health Physics staff. A brief overview of LAMPF is presented, and the Operational Safety Program is discussed, with emphasis on the radiological safety and health physics aspects

Calculation of displacement and helium production at the LAMPF irradiation facility

International Nuclear Information System (INIS)

Davidson, D.R.; Greenwood, L.R.; Sommer, W.F.; Wechsler, M.S.

1984-01-01

Differential and total displacement and helium production rates are calculated for copper irradiated by spallation neutrons and 760 MeV protons at LAMPF. The calculations are performed using the SPECTER and VNMTC computer codes, the latter being specially designed for spallation radiation damage calculations. For comparison, similar SPECTER calculations are also described for irradiation of copper in EBR-II and RTNS-II. The results indicate substantial contributions to the displacement and helium production rates due to neutrons in the high-energy tail (above 40 MeV) of the LAMPF spallation neutron spectrum. Still higher production rates are calculated for irradiations in the direct proton beam. These results will provide useful background information for research to be conducted at a new irradiation facility at LAMPF

Major facility overhauls at LAMPF

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.; Sommer, W.F. Jr.

1985-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) is a linear proton accelerator designed to operate at 800 MeV and 1.0 mA. It has been operating at power levels above 200 microamperes since February of 1976 and now routinely operates near the design level. This paper outlines the problems encountered with the original target cell components, the repairs required since 1976, and specifically details the steps involved in the complete replacement of the vital target cell components. These components include target boxes, collimators, main beam line magnets, and the front-end magnets of the secondary beam lines. The A-2 target cell was replaced in the spring of 1983 and the A-1 target cell was replaced in the spring of 1984. Both have operated satisfactorily since their completion, with only minor difficulties. The overhaul and total component replacement in the beam stop area (A-6) was completed in early May 1985 and has just been placed in operation. The upgrade, in addition to the replacement of the beam stop and the vacuum-to-air window with state-of-the-art designs, provides a greatly increased capability of both proton and neutron irradiation of materials

Progress at LAMPF: Clinton P. Anderson Meson Physics Facility. Progress report, January-June 1981

International Nuclear Information System (INIS)

Allred, J.C.

1981-09-01

Progress at LAMPF is the semiannual progress report of the MP Division of the Los Alamos National Laboratory. The report includes brief reports on research done at LAMPF by researchers from other institutions and Los Alamos divisions

Progress at LAMPF: Clinton P. Anderson Meson Physics Facility. Progress report, January-June 1981

Energy Technology Data Exchange (ETDEWEB)

Allred, J.C. (ed.)

1981-09-01

Progress at LAMPF is the semiannual progress report of the MP Division of the Los Alamos National Laboratory. The report includes brief reports on research done at LAMPF by researchers from other institutions and Los Alamos divisions.

Progress at LAMPF: Clinton P. Anderson Meson Physics Facility. Progress report, July-December 1980

International Nuclear Information System (INIS)

Allred, J.C.

1981-03-01

Progress at LAMPF is the semiannual progress report of the MP Division of the Los Alamos National Laboratory. The report also includes brief reports on research done at LAMPF by researchers from other institutions and Los Alamos divisions

Overview of LAMPF and its accomplishments

International Nuclear Information System (INIS)

Rosen, L.

1978-04-01

The report presented is from a talk given at a Los Alamos Scientific Laboratory colloquium on October 4, 1977, in which the history, technological accomplishments, present status, and scientific program at the Clinton P. Anderson Meson Physics Facility (LAMPF) were reviewed

Nucleon-nucleon scattering at LAMPF and KEK

International Nuclear Information System (INIS)

Glass, G.

1988-01-01

A review of current measurements of spin-dependent observables in p-p and n-p scattering is given for experiments done at two laboratories, Clinton P. Anderson Meson Physics Facility at Los Alamos (LAMPF) and the National Laboratory for High Energy Physics in Japan (KEK). 18 refs., 12 figs

A CAMAC based knob controller for the LAMPF control system

International Nuclear Information System (INIS)

Smith, W.; Bjorklund, E.

1987-01-01

The control computer for the Los Alamos Meson Physics Facility (LAMPF) has been recently upgraded from an SEL-840 to a VAX 11/780 running the VMS operating system. As part of this upgrade, a CAMAC-based knob controller was developed for the new control system. The knobs allow the facility operators to have slew control over software selectable accelerator devices. An alphanumeric display associated with each knob monitors the progress of the selected device. This paper describes the system requirements for the new LAMPF knob controller, and the resulting hardware and software design

Recent advances in remote handling at LAMPF

International Nuclear Information System (INIS)

Lambert, J.E.; Grisham, D.L.

1985-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) has operated at beam currents above 200 microamperes since 1976. As a result, the main experimental beam line (Line A) has become increasingly radioactive over the years. Since 1976 the radiation levels have steadily increased from 100 mR/hr to levels that exceed 10,000 R/hr in the components near the pion production targets. During this time the LAMPF remote handling system, Monitor, has continued to operate successfully in the ever-increasing radiation levels, as well as with more complex remote-handling situations. This paper briefly describes the evolution of Monitor and specifically describes the complete rebuild of the A-6 target area, which is designated as the beam stop, but also includes isotope production capabilities and a primitive neutron irradiation facility. The new facility includes not only the beam stop and isotope production, but also facilities for proton irradiation and a ten-fold expansion in neutron irradiation facilities

The PILAC project at LAMPF

International Nuclear Information System (INIS)

McClelland, J.B.

1991-01-01

Plans for a new pion linear accelerator (PILAC) facility at LAMPF are discussed. A reference design to take intense pion beams produced at LAMPF and to accelerate them up to 1.2 GeV/c in a new superconducting linac is reported. A new experimental facility is planned to utilize the high intensity (10 9 π/sec), high-resolution (200-keV) beams provided by PILAC. The major components of the scientific program made possible by this new facility are discussed

Progress at LAMPF, 1992--1993

Energy Technology Data Exchange (ETDEWEB)

Hoffman, C.M. [ed.

1994-07-25

This Progress Report describes the operation of the Los Alamos Meson Physics Facility (LAMPF) and the research programs carried out there for the years 1992 and 1993. The accelerator operated for over 100 days in 1992, providing beams of H{sup +}, H{sup {minus}}, and polarized H{sup {minus}} for a rich and varied research program in nuclear physics. The accelerator had only fair beam availability in 1992 (for example, the average H{sup +} beam availability was 72%), caused largely by problems in the 201-MHz rf system. A major effort was expended to address these problems before the 1993 run. These efforts were rewarded by good beam availability in 1993 and few problems with the 201-MHz system. LAMPF operated remarkably smoothly during 1993, in the midst of a period of great uncertainty in the future of the facility and the downsizing of MP Division, which led to the loss of a large number of key people to positions elsewhere in the Laboratory. The H{sup +} intensity had to be held to no more than {approximately} 800{mu}A because of a vacuum leak in the A2 target. Nevertheless, the accelerator operated very.reliably and the summer run in 1993 proved to be extremely productive. This report discusses the research conducted on: Nuclear and particle physics; atomic physics; radiation effects; materials science; astrophysics; and theoretical physics.

Progress at LAMPF, 1992--1993

International Nuclear Information System (INIS)

Hoffman, C.M.

1994-01-01

This Progress Report describes the operation of the Los Alamos Meson Physics Facility (LAMPF) and the research programs carried out there for the years 1992 and 1993. The accelerator operated for over 100 days in 1992, providing beams of H + , H - , and polarized H - for a rich and varied research program in nuclear physics. The accelerator had only fair beam availability in 1992 (for example, the average H + beam availability was 72%), caused largely by problems in the 201-MHz rf system. A major effort was expended to address these problems before the 1993 run. These efforts were rewarded by good beam availability in 1993 and few problems with the 201-MHz system. LAMPF operated remarkably smoothly during 1993, in the midst of a period of great uncertainty in the future of the facility and the downsizing of MP Division, which led to the loss of a large number of key people to positions elsewhere in the Laboratory. The H + intensity had to be held to no more than ∼ 800μA because of a vacuum leak in the A2 target. Nevertheless, the accelerator operated very.reliably and the summer run in 1993 proved to be extremely productive. This report discusses the research conducted on: Nuclear and particle physics; atomic physics; radiation effects; materials science; astrophysics; and theoretical physics

Water-cooled target-box design at LAMPF

International Nuclear Information System (INIS)

Grisham, D.; Lambert, J.

1983-01-01

The target boxes in the main experimental beam line (Line A) at the Clinton P. Anderson Meson Physics Facility (LAMPF) have operated since 1976. A program of replacing the boxes is underway. This paper will present past history, design considerations, calculational results and the final box design

Tenth LAMPF users meeting, November 7--9, 1976

International Nuclear Information System (INIS)

Rosen, L.

1977-03-01

The text of a brief talk given before the Tenth LAMPF Users Meeting is presented. Progress made at the Clinton P. Anderson Meson Physics Facility is reported, and the schedule for current upgrading and typical operating cost increases are given

Water-cooled beam line components at LAMPF

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1981-01-01

The beam line components that comprise the main experimental beam at the Clinton P. Anderson Meson Physics Facility (LAMPF) have been operating since February 1976. This paper will define the functions of the primary water-cooled elements, their design evolution, and our operating experience to the present time

Nuclear physics accelerator facilities

International Nuclear Information System (INIS)

1988-12-01

This paper describes many of the nuclear physics heavy-ion accelerator facilities in the US and the research programs being conducted. The accelerators described are: Argonne National Laboratory--ATLAS; Brookhaven National Laboratory--Tandem/AGS Heavy Ion Facility; Brookhaven National Laboratory--Relativistic Heavy Ion Collider (RHIC) (Proposed); Continuous Electron Beam Accelerator Facility; Lawrence Berkeley Laboratory--Bevalac; Lawrence Berkeley Laboratory--88-Inch Cyclotron; Los Alamos National Laboratory--Clinton P. Anderson Meson Physics Facility (LAMPF); Massachusetts Institute of Technology--Bates Linear Accelerator Center; Oak Ridge National Laboratory--Holifield Heavy Ion Research Facility; Oak Ridge National Laboratory--Oak Ridge Electron Linear Accelerator; Stanford Linear Accelerator Center--Nuclear Physics Injector; Texas AandM University--Texas AandM Cyclotron; Triangle Universities Nuclear Laboratory (TUNL); University of Washington--Tandem/Superconducting Booster; and Yale University--Tandem Van de Graaff

Status of the Clinton P. Anderson Meson Physics Facility (LAMPF)

International Nuclear Information System (INIS)

Jain, M.; Rosen, L.

1975-01-01

A brief history and a description of the LAMPF Linac is given, followed by a discussion of the experimental areas, some selected experimental results, and some practical applications. Differential cross section data for n-p charge exchange scattering near 640 MeV are compared with data taken on other machines, and data on pion scattering are presented. The application of negative pions to the treatment of cancer is discussed

Waste management at LAMPF

International Nuclear Information System (INIS)

Lambert, J.E.; Grisham, D.L.

1982-01-01

Future major improvements at the Clinto P. Anderson Meson Physics Facility (LAMPF) will require replacement of many large radioactive components. Proper disposal of the components presents special waste management problems caused by component size, weight, geometry, and activity level. A special, large cask trailer (54 metric tons gross) is being constructed for transporting the material to the disposal site. The cask trailer is designed so that the amount of shielding may be individually tailored to suit the geometry and activity level of eah item transported. Special handling techniques and methods of stabilizing loose contamination are being developed to facilitate transport of large radioactive components across open areas. A special Monitor remote-handling system is being constructed to perform the various preparation and rigging operations. Implementation of this equipment will expedite future improvements at LAMPF with minimum impact and/or interference with other ongoing activities

LAMPF II capabilities from an experimenter's viewpoint

International Nuclear Information System (INIS)

Macek, R.J.

1985-01-01

LAMPF II has been proposed to extend the intensity frontier of nuclear and particle physics from about 1 GeV to 45 GeV. It is reviewed here with emphasis on capabilities of the experimental facilities. Major accelerator features, costs, and the choice of energy and current are also discussed. 5 refs., 16 figs

Fifteenth LAMPF users group meeting

International Nuclear Information System (INIS)

Cochran, D.R.F.

1982-03-01

The Fifteenth LAMPF Users Group Meeting was held November 2-3, 1981 at the Clinton P. Anderson Meson Physical Facility. The program of papers scheduled to be presented was amended to include a Report from Washington by Clarence R. Richardson, US Department of Energy. The general meeting ended with a round-table working group discussion concerning the Planning for a Kaon Factory. Individual items from the meeting were prepared separately for the data base

The status of the LAMPF control system upgrade

International Nuclear Information System (INIS)

Carr, G.P.; Schaller, S.C.; Bjorklund, E.A.; Burns, M.J.; Harrison, J.F.; Rose, P.A.; Schultz, D.E.

1987-01-01

The upgraded Los Alamos Meson Physics Facility (LAMPF) control system is now operational. The SEL-840 computer has been removed, and all application programs are now running on VAXes. We are continuing to upgrade the control system network. We are using MicroVMS systems for distributed local control and have introduced VAXELN systems for dedicated real-time situations. Communications with both systems is based on a standardized remote procedure call interface. We have also begun to integrate the Proton Storage Ring controls with the LAMPF control system, to experiment with VAX/GPX-based workstation operator interfaces, and to investigate possible applications of artificial intelligence technology. 13 refs

Lessons from shielding retrofits at the LAMPF/LANSCE/PSR accelerator, beam lines and target facilities

International Nuclear Information System (INIS)

Macek, R.J.

1994-01-01

The experience in the past 7 years to improve the shielding and radiation control systems at the Los Alamos Meson Physics Facility (LAMPF) and the Manuel Lujan Jr. Neutron Scattering Center (LANSCE) provides important lessons for the design of radiation control systems at future, high beam power proton accelerator facilities. Major issues confronted and insight gained in developing shielding criteria and in the use of radiation interlocks are discussed. For accelerators and beam lines requiring hands-on-maintenance, our experience suggests that shielding criteria based on accident scenarios will be more demanding than criteria based on routinely encountered beam losses. Specification and analysis of the appropriate design basis accident become all important. Mitigation by active protection systems of the consequences of potential, but severe, prompt radiation accidents has been advocated as an alternate choice to shielding retrofits for risk management at both facilities. Acceptance of active protection systems has proven elusive primarily because of the difficulty in providing convincing proof that failure of active systems (to mitigate the accident) is incredible. Results from extensive shielding assessment studies are presented including data from experimental beam spill tests, comparisons with model estimates, and evidence bearing on the limitations of line-of-sight attenuation models in complex geometries. The scope and significant characteristics of major shielding retrofit projects at the LAMPF site are illustrated by the project to improve the shielding beneath a road over a multiuse, high-intensity beam line (Line D)

Neutron metrology in LAMPF, USA

International Nuclear Information System (INIS)

Ketema, D.J.; Nolthenius, H.J.

1990-08-01

The characterization of appropriate materials for fusion reactors requires a high intensity neutron source which simulates the neutron spectrum and the radiation conditions at the positions of interest in a fusion reactor (first wall). A neutron spectrum of interest is found in the Clinton P. Anderson Los Alamos Meson Physics Facility (LAMPF). Various ceramic materials and some polycrystalline graphites were irradiated in this facility during two intervals of time in 1986 and 1987. The specimens were accompanied by several sets with activation detectors. This report presents the saturation activities per atom obtained from these sets. (author). 3 refs.; 8 figs.; 10 tabs

Progress at LAMPF

International Nuclear Information System (INIS)

Poelakker, K.

1989-09-01

This report discusses project experiments done at Lampf under the following topics: nuclear and particle physics; astrophysics; atomic and molecular physics; materials science; nuclear chemistry; radiation effects; radioisotope production; and theory

Progress at LAMPF

Energy Technology Data Exchange (ETDEWEB)

Poelakker, K.

1989-09-01

This report discusses project experiments done at Lampf under the following topics: nuclear and particle physics; astrophysics; atomic and molecular physics; materials science; nuclear chemistry; radiation effects; radioisotope production; and theory.

Neutrino physics at LAMPF

International Nuclear Information System (INIS)

Garvey, G.T.

1989-01-01

There are three neutrino experiments at LAMPF in various stages of completion or development. E225, the study of electron-neutrino electron scattering, which completed data taking in December 1986 and has just about completed all its analysis. E645, a search for /bar /nu///sub μ/ → /bar /nu///sub e/ oscillation, is in its third and final year of data taking. The Large Cerenkov Detector (LCD), associated with E1015, has undergone extensive scientific and technical review and we are presently trying to obtain the necessary funds to build the detector, beam line, and target. In the following, each of these experiments will be briefly discussed. Before doing so, it is useful to show the characteristics of the neutrino spectrum resulting from the decay of π + at rest. It is also useful to realize that, on average, an 800-MeV proton from LAMPF produces about 0.1 π + decaying at rest. 16 refs., 5 figs., 4 tabs

Review of Physics Research Programs at LAMPF. Progress report, January-December 1983

Energy Technology Data Exchange (ETDEWEB)

Allred, J.C. (ed.)

1984-04-01

Research and development summaries are presented under the main headings: research, proton storage ring construction and research program development, status of LAMPF II, facility and experimental development, and accelerator operations. Complete lists are given for experiments run in 1983, new prospects, and active and complete experiments by channel. (WHK)

Review of Physics Research Programs at LAMPF. Progress report, January-December 1983

International Nuclear Information System (INIS)

Allred, J.C.

1984-04-01

Research and development summaries are presented under the main headings: research, proton storage ring construction and research program development, status of LAMPF II, facility and experimental development, and accelerator operations. Complete lists are given for experiments run in 1983, new prospects, and active and complete experiments by channel

Remote handling at LAMPF

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1983-01-01

Experimental area A at the Clinton P. Anderson Meson Physics Facility (LAMPF) encompasses a large area. Presently there are four experimental target cells along the main proton beam line that have become highly radioactive, thus dictating that all maintenance be performed remotely. The Monitor remote handling system was developed to perform in situ maintenance at any location within area A. Due to the complexity of experimental systems and confined space, conventional remote handling methods based upon hot cell and/or hot bay concepts are not workable. Contrary to conventional remote handling which require special tooling for each specifically planned operation, the Monitor concept is aimed at providing a totally flexible system capable of remotely performing general mechanical and electrical maintenance operations using standard tools. The Monitor system is described

LAMPF: its origins, history, and accomplishments

International Nuclear Information System (INIS)

Rosen, L.

1985-01-01

The main vehicle for bringing the pion to bear on a vast array of problems, has been the meson factories. Today there exist such facilities in Switzerland (SIN), in Canada (TRIUMF), and in the USA (LAMPF). A fourth is just now being completed in the Soviet Union. They are enormous enterprises - the current replacement value of LMPF is $350 million, not including the part devoted to national security problems. But they accommodate hundreds of scientists from around the world and by so doing generate political as well as intellectual and economic capital. Proton facilities, together with heavy-ion accelerators and electron facilities, form a triad on which stands the present edifice of experimental nuclear science. Each leg of this triad is dependent, to a greater or lesser extent, on the other two. However, in terms of versatility, the size of the community it serves, and the relatively short-term application of the knowledge base and people base for which nuclear science is responsible, the meson factory part of the above triad is by no means the least important component. I discuss this component from the standpoint of the facility I know best, namely LAMPF. 33 refs., 36 figs

Spallation radiation damage and the radiation damage facility at the LAMPF A-6 target station

Energy Technology Data Exchange (ETDEWEB)

Wechsler, M.S.; Sommer, W.F. (Los Alamos National Lab., NM (USA))

1984-05-01

A redesign of the Clinton P. Anderson Los Alamos Meson Physics Facility (LAMPF) A-6 Target Station is underway that will permit materials irradiations to be conducted in the proton beam and in the spallation neutron environment under more controlled conditions than has been possible heretofore. The protons of energy near 800 MeV and beam current approaching one mA are able to produce radiation damage rates (displacement production rates) as high as can be achieved in fission reactors, and the damage is uniform over macroscopic dimensions. The spallation neutrons have a degraded fission spectrum energy distribution, with the important admixture of a high energy tail up to 800 MeV. Irradiations in these radiation environments can be used to address important problems in the development of materials for fusion reactors. The redesign of the A-6 Target Station is described and plans for its use are discussed.

Measurement and modeling of external radiation during 1984 from LAMPF atmospheric emissions

International Nuclear Information System (INIS)

Bowen, B.M.; Olsen, W.A.; Van Etten, D.; Chen, I.

1986-07-01

An array of three portable, pressurized ionization chambers (PICs) measured short-term external radiation levels produced by air activation products from the Los Alamos Meson Physics Facility (LAMPF). The monitoring was at the closet offsite location, 700-900 m north and northeast of the source, and across a large, deep canyon. A Gaussian-type atmospheric dispersion model, using onsite meteorological and stack release data, was tested during their study. Monitoring results indicate that a persistent, local up-valley wind during the evening and early morning hours is largely responsible for causing the highest radiation levels to the northeast and north-northeast of LAMPF. Comparison of predicted and measured daily external radiation levels indicates a high degree of correlation. The model also gives accurate estimates of measured concentrations over longer periods of time

Probabilistic risk assessment for the Los Alamos Meson Physics Facility worst-case design-basis accident

International Nuclear Information System (INIS)

Sharirli, M.; Butner, J.M.; Rand, J.L.; Macek, R.J.; McKinney, S.J.; Roush, M.L.

1992-01-01

This paper presents results from a Los Alamos National Laboratory Engineering and Safety Analysis Group assessment of the worse-case design-basis accident associated with the Clinton P. Anderson Meson Physics Facility (LAMPF)/Weapons Neutron Research (WNR) Facility. The primary goal of the analysis was to quantify the accident sequences that result in personnel radiation exposure in the WNR Experimental Hall following the worst-case design-basis accident, a complete spill of the LAMPF accelerator 1L beam. This study also provides information regarding the roles of hardware systems and operators in these sequences, and insights regarding the areas where improvements can increase facility-operation safety. Results also include confidence ranges to incorporate combined effects of uncertainties in probability estimates and importance measures to determine how variations in individual events affect the frequencies in accident sequences

Measurement and modeling of gamma-absorbed doses due to atmospheric releases from Los Alamos Meson Physics Facility

International Nuclear Information System (INIS)

Bowen, B.M.; Chen, A.I.; Olsen, W.A.; Van Etten, D.M.

1985-01-01

Short-term gamma-absorbed doses were measured by one high-pressure ionization chamber (HPIC) at an azimuth of 12 0 from the Los Alamos Meson Physics Facility (LAMPF) stack during the January 1 through February 8 operating cycle. Two HPICs were in the field during the September 8 through December 31 operating cycle, one north and the other north-northeast of the LAMPF stack, but they did not provide reliable data. Meteorological data were also measured at both East Gate and LAMPF. Airborne emission data were taken at the stack. Daily model predictions, based on the integration of modeled 15-min periods, were made for the first LAMPF operating cycle and were compared with the measured data. A comparison of the predicted and measured daily gamma doses due to LAMPF emissions is presented. There is very good correlation between measured and predicted values. During 39-day operating cycles, the model predicted an absorbed dose of 10.3 mrad compared with the 8.8 mrad that was measured, an overprediction of 17%

Status of LAMPF

International Nuclear Information System (INIS)

Rosen, L.

1979-01-01

Crucial aspects of the LAMPF operation and its scientific programs during 1978 are discussed and evaluated. This report is from a talk given at the Twelfth LAMPF Users Meeting, Novermber 13 and 14, 1978

Status of PILAC: A pion linac facility for 1-GeV pion physics at LAMPF

International Nuclear Information System (INIS)

Thiessen, H.A.

1990-01-01

A Pion Linac (PILAC) is being designed for LAMPF. Together with its high resolution beam line and spectrometer, the system is optimized to provide 10 9 pions per second on target and 200-keV resolution for the (π + ,K + ) reaction at 920, MeV. There will also be an achromatic beam line capable of utilizing the maximum energy available, thus opening up the possibility of a broad experimental program as is being discussed at this workshop. 12 figs

Calculation of displacement and helium production at the LAMPF irradiation facility

International Nuclear Information System (INIS)

Wechsler, M.S.; Davidson, D.R.; Sommer, W.F.; Greenwood, L.R.

1985-01-01

Differential and total displacement and helium-production rates are calculated for copper irradiated by spallation neutrons and 760-MeV protons at LAMPF. The calculations are performed using the SPECTOR and VNMTC computer codes, the latter being specially designed for spallation radiation-damage calculations. For comparison, similar SPECTER calculations are also described for irradiation of copper in the experimental breeder reactor (EBR-II) at the Argonne National Laboratory-West in Idaho, and in the rotating target neutron source (RTNS-II) at Lawrence Livermore Laboratory. The neutron energy spectra for LAMPF, EBR-II, and RTNS-II and the displacement and helium-production cross sections are shown

Precision measurements of pion nucleon elastic scattering in the P3 energy region at LAMPF. 1984 progress report

International Nuclear Information System (INIS)

Sadler, M.E.

1984-01-01

This study is a continuation of the pion-nucleon program at the Los Alamos Meson Physics Facility. Previous measurements, in chronological order, have included differential cross sections for π/sup +-/p elastic scattering at P/sub π/ = 378 - 687 MeV/c (LAMPF experiment 363), π - p charge exchange for P/sub π/ = 247 - 687 MeV/c (LAMPF experiment 120), and measurements of the polarization asymmetry for π/sup +-/p -> π/sup +-/p and π - p -> π 0 n for P/sub π/ = 471 - 687 MeV/c (LAMPF experiments 120* and 120**, respectively). Two experiments were initiated in the past year, forward-angle differential cross sections for π - p -> π 0 n at P/sub π/ = 96 - 150 MeV/c (LAMPF experiment 809) and polarization asymmetry for π - p - > γn (LAMPF experiment 804). Approved experiments which will be scheduled in the future are spin rotation measurements for π/sup +-/p -> π/sup +-/p (LAMPF experiments 806 and 807) and differential cross sections for π - p -> π 0 n near 0 0 and 180 0 at P/sub π/ = 471-687 MeV/c (LAMPF experiment 849). Another experiment, differential cross section measurements for π/sup +-/ elastic scattering on 3 He and 3 H (LAMPF experiment 546), has also been completed. The 3 He and 3 H targets form an isospin doublet analogous to the proton and neutron. The I 3 = -1/2 member ( 3 H) of the multiplet can be utilized as a target in this case, allowing a direct test of charge symmetry not achievable in the πN system due to the impossibility of a pure neutron target

LAMPF operations at 500 μA

International Nuclear Information System (INIS)

Hagerman, D.C.

1979-01-01

LAMPF now operates reliably producing 500 μA of H + beam and a few μA of H - beam or 10 nA polarized H - beam. Beam loss in the accelerator is quite acceptable at these currents. This level of performance has been achieved through solution of a wide variety of accelerator problems and a continuous evolution of the experimental areas. The future of the facility is promising both in terms of the existing experimental programs and the opportunities for significant facility improvement projects

Possibilities at LAMPF for studying nuclei of astrophysical interest

International Nuclear Information System (INIS)

Talbert, W.L. Jr.; Bunker, M.E.

1985-01-01

Nuclear data needs in astrophysics range from neutron capture cross sections of a number of stable or near-stable nuclei to decay and neutron binding-energy data for highly neutron-rich nuclei. LAMPF has the potential to contribute significantly to these needs. The new Los Alamos Neutron Scattering Center (LANSCE, aka WNR/PSR) offers world-class capabilities for neutron capture studies up to an MeV or so. The study of nuclei far from stability could be extended into some regions of astrophysical interest using a proposed He-jet coupled mass separator system with a target/production chamber in the LAMPF beam stop area. Specific examples of possible studies at each facility are presented

[Pion-nucleus interactions and nucleon transfer reactions primarily at LAMPF, TRIUMF, and IUCF]: Technical progress report, [October 1, 1986-October 1, 1987

International Nuclear Information System (INIS)

Kraushaar, J.J.

1987-01-01

This report summarizes work carried out between October 1, 1986 and October 1, 1987 in the Nuclear Physics Laboratory of the Department of Physics at the University of Colorado, Boulder. Other efforts in the laboratory, such as development of an R.F. cavity for an advanced hadron facility accelerator, beam pickoff devices, a buncher for the LAMPF proton beam, and the US-Brazil Cooperative Science Program are described

Surveying and optical tooling technologies combined to align a skewed beamline at the LAMPF accelerator

International Nuclear Information System (INIS)

Bauke, W.; Clark, D.A.; Trujillo, P.B.

1985-01-01

Optical Tooling evolved from traditional surveying, and both technologies are sometimes used interchangeably in large industrial installations, since the instruments and their specialized adapters and supports complement each other well. A unique marriage of both technologies was accomplished in a novel application at LAMPF, the Los Alamos Meson Physics Facility. LAMPF consists of a linear accelerator with multiple target systems, one of which had to be altered to accommodate a new beamline for a neutrino experiment. The new line was to be installed into a crowded beam tunnel and had to be skewed and tilted in compound angles to avoid existing equipment. In this paper we describe how Optical Tooling was used in conjunction with simple alignment and reference fixtures to set fiducials on the magnets and other mechanical components of the beamline, and how theodolites and sight levels were then adapted to align these components along the calculated skew planes. Design tolerances are compared with measured alignment results

New intelligent magnet power supplies for LAMPF

International Nuclear Information System (INIS)

Cohen, S.; Sturrock, J.

1991-01-01

New magnet power supplies are scheduled to be installed in the proton linac at the Clinton P. Anderson Meson Physics Facility (LAMPF). The control and interface design of these power supplies represents a departure from all others onsite. A high-level ASCII control protocol has been designed. The supplies have sophisticated microprocessor control onboard and communicate with the accelerator control system via RS-422 (serial communications). The low-level software used by the accelerator control system is currently being rewritten to accommodate these new devices. They will communicate with the control system through a terminal server port connected to the site-wide ethernet backbone. This means that each supply will, for all intents and purposes, be a network object. Details of the design strategies for the analog and digital control for these supplies as well as the control protocol interface will be presented. 5 refs., 5 figs., 1 tab

LAMPF: the meson factory. A LASL monograph

International Nuclear Information System (INIS)

Allred, J.C.

1977-08-01

A general and simplified introduction to the entire concept of LAMPF is given in terms of its experimental capabilities. Parts of the current experimental program are used as illustrative examples. Topics discussed include: (1) the evolution of the meson factory; (2) accelerator construction; (3) strong focusing; (4) accelerator innovations at LAMPF; (5) photons and pions; (6) muons as nuclear probes; (7) nuclear chemistry; (8) radiobiology and medical applications; (9) radioisotope production; (10) materials testing; and (11) LAMPF management and users group

LAMPF: the meson factory. A LASL monograph

Energy Technology Data Exchange (ETDEWEB)

Allred, J.C.

1977-08-01

A general and simplified introduction to the entire concept of LAMPF is given in terms of its experimental capabilities. Parts of the current experimental program are used as illustrative examples. Topics discussed include: (1) the evolution of the meson factory; (2) accelerator construction; (3) strong focusing; (4) accelerator innovations at LAMPF; (5) photons and pions; (6) muons as nuclear probes; (7) nuclear chemistry; (8) radiobiology and medical applications; (9) radioisotope production; (10) materials testing; and (11) LAMPF management and users group. (PMA)

Neutron experiments at LAMPF

International Nuclear Information System (INIS)

Jain, M.

1975-01-01

The problem of the nucleon-nucleon force is the most fundamental in nuclear physics and is basic to particle physics. However, in the energy range from pion production threshold to 1 GeV, the N-N interaction is rather poorly determined. In general, at these energies, there is no unique set of phase shifts and coupling parameters; the I = 1 parameters are known at least quantitatively, but the I = 0 parameters are not even known qualitatively. This is illustrated by the variation of 3 S 1 phase shift from -17 to 35 0 in the three solutions of the energy-independent nucleon-nucleon phase shift analysis of Glonti. In addition, these results are in considerable disagreement with the analyses of MacGregor. This is due to the paucity of the n-p scattering data including polarization and triple scattering parameters. Furthermore, as will be shown later, there is considerable disagreement between the results from different groups in the intermediate energy region of even so basic an observable as the n-p differential cross section. Therefore, a long range program was started for the definitive determination of the n-p interaction at LAMPF energies (300 to 800 MeV). This is an ambitious project which will ultimately require the performance of many experiments. Each successive set of measurements will clarify our understainding of the n-p system to some degree and simplify the problems of the subsequent measurements. In this communication a general description of the experimental setup and the various neutron experiments performed at LAMPF is given

Neutrino oscillations at LAMPF

International Nuclear Information System (INIS)

Carlini, R.; Choi, C.; Donohue, J.

1985-01-01

Work at Argonne continues on the construction of the neutrino oscillation experiment (E645). Construction of detector supports and active shield components were completed at the Provo plant of the principal contractor for the project (the Pittsburgh-Des Moines Corporation). Erection of the major experimental components was completed at the LAMPF experimental site in mid-March 1985. Work continues on the tunnel which will house the detector. Construction of detector components (scintillators and proportional drift tubes) is proceeding at Ohio State University and Louisiana State University. Consolidation of these components into the 20-ton neutrino detector is beginning at LAMPF

The comparative uptake and interaction of several radionuclides in the trophic levels surrounding the Los Alamos Meson Physics Facility (LAMPF) waste water ponds

Energy Technology Data Exchange (ETDEWEB)

Brooks, G.H. Jr.

1989-08-01

A study was undertaken to examine the uptake, distribution, and interaction of five activation products (Co-57, Be-7, Cs-134, Rb-83, and Mn-54) within the biotic and abiotic components surrounding the waste treatment lagoons of the Los Alamos Meson Physics Facility (LAMPF). The study attempted to ascertain where, and what specific interactions were taking place among the isotopes and the biotic/abiotic components. A statistical approach, utilizing Multivariate Analysis of Variance (MANOVA), was conducted testing the radioisotopic concentrations by (1) the trophic levels (TROPLVL) in each position sampled on the grid, (2) where sampled on the grid (TRAN), (3) where sampled with-in each grid line (PLOT), and (4) the side with which sampled (SIDE). This provided both the dependent and independent variables that would be tested. The Null Hypothesis (Ho) tested the difference in the mean values of the isotopes within/between each of the four independent variables. The Rb-83 statistic indicated an accumulation within the TRAN and PLOT variables within the sampled area. The Co-57 test statistic provided a value which indicated that accumulation of this isotope within TROPLVL was taking place. Mn-54 test values indicated that accumulation was also taking place at the higher trophic levels within the PLOT, TRAN, and SIDE positions. Cs-134 was found to accumulate to third level in this trophic level structure (TROPLVL-(vegetation)), and then decrease from there. The Be-7 component provided no variance from known compartmental transfers. 210 refs., 17 figs., 4 tabs.

The comparative uptake and interaction of several radionuclides in the trophic levels surrounding the Los Alamos Meson Physics Facility (LAMPF) waste water ponds

International Nuclear Information System (INIS)

Brooks, G.H. Jr.

1989-08-01

A study was undertaken to examine the uptake, distribution, and interaction of five activation products (Co-57, Be-7, Cs-134, Rb-83, and Mn-54) within the biotic and abiotic components surrounding the waste treatment lagoons of the Los Alamos Meson Physics Facility (LAMPF). The study attempted to ascertain where, and what specific interactions were taking place among the isotopes and the biotic/abiotic components. A statistical approach, utilizing Multivariate Analysis of Variance (MANOVA), was conducted testing the radioisotopic concentrations by (1) the trophic levels (TROPLVL) in each position sampled on the grid, (2) where sampled on the grid (TRAN), (3) where sampled with-in each grid line (PLOT), and (4) the side with which sampled (SIDE). This provided both the dependent and independent variables that would be tested. The Null Hypothesis (Ho) tested the difference in the mean values of the isotopes within/between each of the four independent variables. The Rb-83 statistic indicated an accumulation within the TRAN and PLOT variables within the sampled area. The Co-57 test statistic provided a value which indicated that accumulation of this isotope within TROPLVL was taking place. Mn-54 test values indicated that accumulation was also taking place at the higher trophic levels within the PLOT, TRAN, and SIDE positions. Cs-134 was found to accumulate to third level in this trophic level structure [TROPLVL-(vegetation)], and then decrease from there. The Be-7 component provided no variance from known compartmental transfers. 210 refs., 17 figs., 4 tabs

Operation of the optically pumped polarized H- source at LAMPF

International Nuclear Information System (INIS)

York, R.L.; Tupa, D.; Swenson, D.R.; van Dyck, O.B.

1991-01-01

We report on the first five months of operation of the Optically Pumped Polarized Ion Source (OPPIS) for the nuclear physics research program at LAMPF. The LAMPF OPPIS is unique in using Ti: Sapphire lasers to polarize the potassium charge-exchange medium, and until recently was unique in using a superconducting magnet in the ECR source and polarizer regions. The ECR extraction electrode biasing arrangement is also unique. Typical performance was 25 microamps of peak current (measured at 750 keV) with 55% beam polarization or 15 microamps at 62%. Ion source availability was greater than 90%. We also report our planned improvements in preparation for research operation in May of 1991. 3 refs., 4 figs

Design for a second-generation proton storage ring at LAMPF

International Nuclear Information System (INIS)

Colton, E.P.

1988-01-01

A conceptual design is presented for a second-generation proton storage ring complex at LAMPF. The facility would consist of two stacked racetrack-shaped machines. These machines would deliver a 1.2-mA beam of 1.6-GeV protons at 48 Hz. The pulse length would be 1.75 μsec which represents a time compression of 570. 1 ref., 8 figs., 1 tab

Potential capabilities at LAMPF to study nuclei far from stability

International Nuclear Information System (INIS)

Talbert, W.L.; Bunker, M.E.

1985-01-01

Feasibility studies have shown that a He-jet activity transport line, with a target chamber placed in the LAMPF main beam line, will provide access to short-lived isotopes of a number of elements that cannot be extracted efficiently for study at any other type of on-line facility. The He-jet technique requires targets thin enough to allow a large fraction of the reaction products to recoil out of the target foils; hence, a very intense incident beam current, such as that uniquely available at LAMPF, is needed to produce yields of individual radioisotopes sufficient for detailed nuclear studies. We present the results of feasibility experiments on He-jet transport efficiency and timing. We also present estimates on availability of nuclei far from stability from both fission and spallation processes. Areas of interest for study of nuclear properties far from stability will be outlined. 17 refs

LAMPF nuclear chemistry data acquisition system

International Nuclear Information System (INIS)

Giesler, G.C.

1983-01-01

The LAMPF Nuclear Chemistry Data Acquisition System (DAS) is designed to provide both real-time control of data acquisition and facilities for data processing for a large variety of users. It consists of a PDP-11/44 connected to a parallel CAMAC branch highway as well as to a large number of peripherals. The various types of radiation counters and spectrometers and their connections to the system will be described. Also discussed will be the various methods of connection considered and their advantages and disadvantages. The operation of the system from the standpoint of both hardware and software will be described as well as plans for the future

Operational health physics at the Los Alamos meson physics proton accelerator

International Nuclear Information System (INIS)

Engelke, M.J.

1975-01-01

The operational health physics practices and procedures at the Clinton P. Anderson Los Alamos Meson Physics Facility (LAMPF), a medium energy, high intensity proton accelerator are reviewed. The operational philosophy used for the control of personnel exposures and radioactive materials is discussed. A particular operation involving the removal of a radioactive beam stop reading in excess of 1000 R/h is described

Beam position monitor multiplexer controller upgrade at the LAMPF proton storage ring

International Nuclear Information System (INIS)

Scarborough, W.K.; Cohen, S.

1992-01-01

The beam position monitor (BPM) is one of the primary diagnostic tools used for the tuning of the proton storage ring (PSR) at the Clinton P. Anderson Meson Physics Facility (LAMPF). A replacement for the existing, monolithic, wire-wrapped microprocessor-based BPM multiplexer controller has been built. The controller has been redesigned as a modular system retaining the same functionality of the original system built in 1981. Individual printed circuit cards are used for each controller function to insure greater maintainability and ease of keeping a spare parts inventory. Programmable logic device technology has substantially reduced the component count of the new controller. Diagnostic software was written to support the development of the upgraded controller. The new software actually uncovered some flaws in the original CAMAC interface. (author)

An introduction to LAMPF data acquisition system introduce

International Nuclear Information System (INIS)

Fu Saihong

1993-01-01

LAMPF Data Acquisition Systems are divided into general DAQ system and advanced MEGA DAQ system. The construct and future plan of general system are described. The second stage trigger has been implemented at LAMPF using a commercially available workstation and VME interface. The implementation is described and measurements of data transfer speeds are presented

Rare kaon decays at LAMPF II

International Nuclear Information System (INIS)

Sanford, T.W.L.

1982-06-01

At LAMPF II, intense beams of kaons will be available that will enable the rare kaon-decay processes to be investigated. This note explores some of the possibilities, which divide into two classes: (1) those that test the standard model of Weinberg and Salam and (2) those that are sensitive to new interactions. For both classes, experiments have been limited not by systematic errors but rather by statistical ones. LAMPF II with its intense flux of kaons thus will enable the frontier of rare kaon decay to be realistically probed

Optimization of a He-jet activity transport system to use at LAMPF

International Nuclear Information System (INIS)

Talbert, W.L. Jr.; Bunker, M.E.; Starner, J.W.

1986-01-01

As part of an assessment of the feasibility for a He-jet coupled on-line mass separator at LAMPF, we have studied performance characteristics of a gas activity transport system under conditions simulating those expected on the main LAMPF beam line. In experiments utilizing a side beam at LAMPF, we have measured absolute transport efficiencies, transit times, aerosol properties, and dependences on beam intensity. Further experiments with a He-jet system at the Omega West Reactor have indicated an optimum configuration of a target chamber to be placed in the LAMPF main beam. The results of these studies suggest that a He-jet activity transport system should work well at LAMPF in the 800-MeV, 1-mA proton beam that is spread over ∼40 cm 2 near the beam stop. 19 refs., 8 figs

Operating experience with LAMPF main beam lines instrumentation and control system

International Nuclear Information System (INIS)

van Dyck, O.B.; Harvey, A.; Howard, H.H.; Roeder, D.L.

1975-01-01

Instrumentation and control (I and C) for the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF) main beam line is based upon central computer control through remote stations which provide input and output to most devices. Operating experience shows that the ability of the computer to give high-quality graphical presentation of the measurements enhances operator performance and instrument usefulness. Experience also shows that operator efficiency degrades rapidly with increasing instrument response time, that is, with increasing delay between the time a control is changed and the result can be observed. For this reason, instrumentation upgrade includes speeding up data acquisition and display times to under 10 s. Similarly, television-viewed phosphors are being retained where possible since their instantaneous response is very useful. Other upgrading of the instrumentation system is planned to improve data accuracy, reliability, redundancy, and instrument radiation tolerance. Past experience is being applied in adding or relocating devices to simplify tuning procedures. (U.S.)

Present and future neutrino physics research at the Los Alamos Meson Physics Facility

International Nuclear Information System (INIS)

Sanders, G.H.

1988-01-01

The Los Alamos Meson Physics Facility is currently the site of two neutrino experiments. A measurement of elastic scattering of electron-neutrinos on electrons is providing confirmation of the destructive interference between the weak neutral and charged currents predicted in the standard electroweak theory. A search for the appearance of /bar/ν//sub e/ is being carried out at the LAMPF beam stop, as well. The status of this experiment is described. A major new initiative is being undertaken to measure neutrino-electron scattering in a large water Cerenkov detector. This meaurement will be precise enough to provide, in combination with the meaurements to be performed at the new generation of high-energy electron-positron colliers, the first experimental study of the standard electrowak theory at the level of one-loop radiative corrections. The detector will also be a vehicle for neutrino-oscillation searches, measurement of neutrinos from supernovae, and other fundamental physics. The apparatus will consist of a neutrino production target and shield surrounded by a water Cerenkov detector. The fiducial volume of water will be approximately 7000 tons, viewed by approximately 13000 20 cm diameter photomultiplier tubes. 11 refs., 6 figs

Simulation of transition crossing in LAMPF II

International Nuclear Information System (INIS)

Warren, J.L.; Thiessen, H.A.

1983-01-01

LAMPF II is the proposed rapid-cycling synchrotron that will take 0.8-GeV protons from the LAMPF linear accelerator and raise them to 32 GeV. Early design models were based on a 60-Hz cycle with 10 13 protons to be accelerated per cycle. Any reasonable magnetic lattice results in the proton beam going through a phase transition. A general accelerator-simulation code that includes the effect of longitudinal space charge, ARCHSIM, has been used to study the transition in a typical achromatic lattice. The beam remains stable through the transition

LAMPF experimental-area beam current monitors

International Nuclear Information System (INIS)

Tallerico, P.J.

1975-01-01

This paper summarizes the design and operational performance of a wide- range current monitor system used to measure charged-particle currents in the experimental areas of the Clinton P. Anderson Meson Physics Facility (LAMPF), a proton accelerator. The major features of the system are high sensitivity, wide dynamic range, and the ability to withstand high levels of radiation. The current pulses detected are from 50 μs to 1 ms in duration at repetition rates of from 1 to 120 Hz. The pulse amplitude varies from 1 μA to 17 mA of protons or H - ions. Both real-time and integrated outputs are available, and the minimum detectable currents are 1 μA at the video output and 50 nA at the integrated output. The basic system is comprised of toroids, preamplifiers, signal conditioners, voltage-to-frequency converters, and digital accumulators. The entire system is spread out over 1 km of beam pipe. Provision is made for calibration and for sending the outputs to remote users. The system is normally controlled by a small digital computer, which allows the system to be quite flexible in operation. The design features of the toroids and the associated electronics are discussed in detail, with emphasis on the steps taken to reduce noise and make the toroids temperature and radiation resistant

[Studies in intermediate energy nuclear physics

International Nuclear Information System (INIS)

Peterson, R.J.

1993-01-01

This report summarizes work carried out between October 1, 1992 and September 30, 1993 at the Nuclear Physics Laboratory of the University of Colorado, Boulder. The experimental program in intermediate-energy nuclear physics is very broadly based; it includes pion-nucleon and pion-nucleus studies at LAMPF and TRIUMF, kaon-nucleus scattering at the AGS, and equipment development for experiments at the next generation of accelerator facilities

Graphite targets at LAMPF

International Nuclear Information System (INIS)

Brown, R.D.; Grisham, D.L.

1983-01-01

Rotating polycrystalline and stationary pyrolytic graphite target designs for the LAMPF experimental area are described. Examples of finite element calculations of temperatures and stresses are presented. Some results of a metallographic investigation of irradiated pyrolytic graphite target plates are included, together with a brief description of high temperature bearings for the rotating targets

Experimental area plans for an advanced hadron facility

Energy Technology Data Exchange (ETDEWEB)

Hoffman, E.W.; Macek, R.J.; Tschalear, C.

1986-01-01

A brief overview is presented of the current plans for an experimental area for a new advanced hadron facility for the exploration of nuclear and particle physics. The facility, LAMPF II, is presently visualized as consisting of the LAMPF linac sending 800 MeV protons to a 6 GeV booster ring followed by a 45 GeV main ring. Two experimental areas area planned. The first is intended to provide neutrinos via a pair of pulsed focusing horns. The other is designed to accommodate secondary beams that span the range of useful energies up to GeV/c. Beam specification goals are discussed with respect to source brightness, beam purity, and beam-line acceptance and length. The various beam lines are briefly described. Production cross sections and rates are estimated for antiproton production. Problems of thermal energy deposition in both components and targets and of effectiveness of particle separators are discussed. 9 refs. (LEW)

Experimental area plans for an advanced hadron facility

International Nuclear Information System (INIS)

Hoffman, E.W.; Macek, R.J.; Tschalear, C.

1986-01-01

A brief overview is presented of the current plans for an experimental area for a new advanced hadron facility for the exploration of nuclear and particle physics. The facility, LAMPF II, is presently visualized as consisting of the LAMPF linac sending 800 MeV protons to a 6 GeV booster ring followed by a 45 GeV main ring. Two experimental areas area planned. The first is intended to provide neutrinos via a pair of pulsed focusing horns. The other is designed to accommodate secondary beams that span the range of useful energies up to GeV/c. Beam specification goals are discussed with respect to source brightness, beam purity, and beam-line acceptance and length. The various beam lines are briefly described. Production cross sections and rates are estimated for antiproton production. Problems of thermal energy deposition in both components and targets and of effectiveness of particle separators are discussed. 9 refs

Engineering, maintenance, and initiatives to improve LAMPF beam availability and system reliability

International Nuclear Information System (INIS)

Harris, H.W.; DeHaven, R.A.; Hart, V.E.; Parsons, W.M.; Sturrock, J.C.

1992-01-01

Two different requirements are driving engineering studies and hardware development to improve LAMPF. The first is concerned with component and system improvements to increase beam availability during the LAMPF production cycle. Hardware changes in RF, power supplies, and magnets are being implemented to increase mean time between failure and reduce time to replace or repair failed units. A joint LAMPF-Industry project is on-going to improve reliability of RF components. A component test stand is being refurbished to include significant development capability. The second approach includes several changes that will increase the duty factor of the existing accelerator. Major changes are being evaluated for replacing the front end of the accelerator. Other changes improving the high brightness capability could result in a new performance plateau for LAMPF. 2 refs., 2 figs

Developments and directions in 200 MHz very high power RF at LAMPF

International Nuclear Information System (INIS)

Cliff, R.; Bush, E.D.; DeHaven, R.A.; Harris, H.W.; Parsons, M.

1991-01-01

The Los Alamos Meson Physics Facility (LAMPF), is a linear particle accelerator a half-mile long. It produces an 800 million electron- volt hydrogen-ion beam at an average current of more than one milliamp. The first RF section of the accelerator consists of four Alvarez drift-tube structures. Each of these structures is excited by an amplifier module at a frequency of 201.25 MHz. These amplifiers operate at a duty of 13 percent or more and at peak pulsed power levels of about 2.5 million watts. The second RF accelerator section consists of forty-four side-coupled-cavity structures. Each of these is excited by an amplifier module at a frequency of 805 MHz. These amplifiers operate at a duty of up to 12 percent and at peak pulsed power levels of about 1.2 million watts. The relatively high average beam current in the accelerator places a heavy demand upon components in the RF systems. The 201-MHz modules have always required a large share of maintenance efforts. In recent years, the four 201.25 MHz modules have been responsible for more than twice as much accelerator down-time as have the forty-four 805 MHz modules. This paper reviews recent, ongoing, and planned improvements in the 201-MHz systems. The Burle Industries 7835 super power triode is used in the final power amplifiers of each of the 201-MHz modules. This tube has been modified for operation at LAMPF by the addition of Penning ion vacuum''pumps.'' This has enabled more effective tube conditioning and restarting. A calorimetry system of high accuracy is in development to monitor tube plate-power dissipation

Need for an intense polarized source at LAMPF. Report on a workshop held at Los Alamos, November 9, 1983

International Nuclear Information System (INIS)

McNaughton, M.W.; Silbar, R.R.; van Dyck, O.B.

1984-04-01

We report on a workshop to consider the need for an intense polarized source at LAMPF. The primary justification for such a source comes from the nucleon-nucleon program; neutron-proton scattering is seriously underdetermined and cannot be satisfactorily completed without such an intense source. Further justification comes from nuclear (vector n,p) and (vector p, vector n) reactions, as well as from traditional nuclear physics at the LAMPF high resolution spectrometer. We recommend that a source capable of providing a few μA beam on target be built as soon as possible

Engineering, maintenance, and new initiatives to improve LAMPF beam availability and system reliability

International Nuclear Information System (INIS)

Harris, H.W.; DeHaven, R.A.; Hart, V.E.; Parsons, W.M.; Sturrock, J.C.

1992-01-01

Two different requirements are driving engineering studies and hardware development to improve LAMPF. The first is concerned with component and system improvements to increase beam availability during the LAMPF production cycle. Hardware changes in RF, power supplies, and magnets are being implemented to increase mean time between failure and reduce time to replace or repair failed units. A joint LAMPF-Industry project is on-going to improve reliability of RF components. A component test stand is being refurbished to include significant development capability. The second approach includes several changes that will increase the duty factor of the existing accelerator. Major changes are being evaluated for replacing the front end of the accelerator. Other changes improving high brightness capability could result in a new performance plateau for LAMPF

Versatile H+ beam chopper system at LAMPF

International Nuclear Information System (INIS)

Lunsford, J.S.; Lawrence, G.P.; Bentley, R.F.

1979-01-01

The H + chopper system at LAMPF provides two modes (A and B) of beam chopping. Mode A provides single micropulses separated by 1 μs or more. Mode B provides a single pulse 50-ns to 10-μs long at the LAMPF repetition rate of 12 Hz. The mode of operation is selected with coaxial relays which can switch during the dead time between LAMPF macropulses. The chopper consists of 1-m-long push-pull helical-wound slow-wave deflecting structures having an axial pulse velocity of 0.04c, which matches the velocity of the proton beam. The helix ground-planes are biased by a pulser providing push-pull 500-V pulses to deflect the H + beam from the injection channel. In chopping mode A, the helical windings are driven by push-pull, 1000-V, 5-ns pulses delivered by a circuit utilizing avalanche transistors and planar triodes. In mode B, the helical windings are driven by push-pull, 1000-V, 50-ns to 10-μs long pulses, produced by a circuit utilizing beam-power tetrodes and fast SCRs. In both modes, these pulses cancel the ground-plane bias and permit beam pulses to be delivered to the linac

Possibilities for a neutron-proton bremsstrahlung experiment at WNR/LAMPF

International Nuclear Information System (INIS)

Wender, S.A.; Nelson, R.O.; Laymon, C.M.; Schillaci, M.; Gibson, B.F.

1990-01-01

The high energy and high intensity of the continuous energy (white) neutron source at the WNR target area of the Los Alamos Meson Physics Facility (LAMPF) may make possible a direct measurement of the neutron-proton bremsstrahlung (NPB) cross section. Several recent papers have discussed the operation of the WNR white neutron source in detail so we will just include a short description of the relevant properties of the source in this article. Next the authors will describe one possible method of measuring the NPB cross section which is based on two calorimetric detectors that measure the energies of the scattered neutrons and the recoil protons. Although there are many other possible experimental approaches and geometries, such as measuring the bremsstrahlung gamma ray directly with a multi-element possibilities in this paper. There are several advantages in using a white neutron source for this type of measurement. First, a wide range of incident neutron energies may be covered. In the case of the WNR, the energy range is from below 50 MeV to over 400 MeV which is above the pion production threshold. Second, all incident neutron energies are measure simultaneously. 6 refs., 5 figs

LAMPF II workshop, Los Alamos National Laboratory, Los Alamos, New Mexico, February 1-4, 1982

International Nuclear Information System (INIS)

Thiessen, H.A.

1982-01-01

This report contains the proceedings of the first LAMPF II Workshop held at Los Alamos February 1 to 4, 1982. Included are the talks that were available in written form. The conclusion of the participants was that there are many exciting areas of physics that will be addressed by such a machine

Design features and performance of the LAMPF high-intensity beam area

International Nuclear Information System (INIS)

Agnew, L.; Grisham, D.; Macek, R.J.; Sommer, W.F.; Werbeck, R.D.

1983-01-01

LAMPF is a multi-purpose high-intensity meson factory capable of producing a 1 mA beam of 800-MeV protons. The three target cells and the beam stop facilities in the high intensity area have many special design features that are required for operation in the presence of high heat loads and intense radiation fields where accessibility is extremely limited. Reliable targets, beam windows, beam stops, beam transport and diagnostic components, vacuum enclosures, and auxiliary systems have been developed. Sophisticated remote-handling systems are employed for maintenance. Complex protection systems have been developed to guard against damage caused by errant beam. Beam availability approaching 90% has been achieved at currents of 600 to 700 μA. A new facility for direct proton and neutron radiation effects studies will be installed in 1985. The new facility will provide an integrated spallation neutron flux of up to 5 x 10 17 m -2 s -1 and will anable proton irradiation studies in the primary beam

Time-resolved beam energy measurements at LAMPF

International Nuclear Information System (INIS)

Hudgings, D.W.; Clark, D.A.; Bryant, H.C.

1979-01-01

A narrow atomic photodetachment resonance is used to measure the LAMPF beam energy. Energy and time resolution are adequate to permit the use of this method in studying transient changes in accelerated beam energy

Radiation-resistant beamline components at LAMPF

International Nuclear Information System (INIS)

Macek, R.J.; Grisham, D.L.; Lambert, J.e.; Werbeck, R.

1983-01-01

A variety of highly radiation-resistant beamline components have been successfully developed at LAMPF primarily for use in the target cells and beam stop area of the intense proton beamline. Design features and operating experience are reviewed for magnets, instrumentation, targets, vacuum seals, vacuum windows, collimators, and beam stops

Medium-energy physics program. Progress report, August 1--October 31, 1977

Energy Technology Data Exchange (ETDEWEB)

van Dyck, O.B.; Dunn, E.D. (comps.)

1978-05-01

A report is given of the medium-energy physics program at the LAMPF linac for the period from August 1 through October 31, 1977. Topics discussed include: (1) accelerator facilities and development; (2) the main beam lines; (3) experimental areas; (4) research; (5) nuclear chemistry; (6) practical applications; (7) linac technology; and (8) management. (PMA)

Medium-energy physics program. Progress report, August 1--October 31, 1977

International Nuclear Information System (INIS)

van Dyck, O.B.; Dunn, E.D.

1978-05-01

A report is given of the medium-energy physics program at the LAMPF linac for the period from August 1 through October 31, 1977. Topics discussed include: (1) accelerator facilities and development; (2) the main beam lines; (3) experimental areas; (4) research; (5) nuclear chemistry; (6) practical applications; (7) linac technology; and (8) management

Modulation improvements in the 201 MHZ RF generators at LAMPF

International Nuclear Information System (INIS)

Parsons, W.M.; Lyles, J.T.M.; Harris, H.W.

1992-01-01

Radio-frequency generators, operating at 201 MHz, power the first four stages of the Los Alamos Meson Physics Facility (LAMPF) accelerator. Each generator consists of four stages of seriesconnected, vacuum-tube amplifiers. The modulation scheme for each stage is different. The fist amplifier is a grid-modulated tetrode that produces 500 W peak-power. The second amplifier is a drive-modulated tetrode that produces 5 kill peak-power. The third stage is a grid- and plate-modulated tetrode that produces 130 kill peak-power. The last stage is a plate-modulated triode that produces 2.5 MW peak power. A modernization program has been initiated to improve the reliability of each of these stages. The first two stages of each generator are being replaced with a single, drive-modulated, solid-state amplifier. Specifications for the amplifier design, and requirements for integration into the system are presented. The third stage will be converted to a drive-modulated system using the current tetrode. This modification involves the development of a 17-kV, 15-A switching supply to replace the present plate-modulator. Design requirements for this switching supply are presented. The final stage will remain plate-modulated but will contain a new driver unit for the modulator tube

Number of detectable kaon decays at LAMPF II

International Nuclear Information System (INIS)

Sanford, T.W.L.

1982-04-01

The maximum number of kaon decays detectable at LAMPF II is estimated for both in-flight and stopping decays. Under reasonable assumptions, the momentum of the kaon beam that optimizes the decay yield occurs at about 6 GeV/c and 600 MeV/c for in-flight and stopping decays, respectively. K + decay yields are fo the order of 7 x 10 7 per 10 14 interacting with K - yields being typically 5 times less. By measuring decays from such beams, a statistical limit of 10 -15 on a branching ratio to a particular channel can be placed in a 100-day run. The large number of kaon decays available at LAMPF II thus provides a powerful tool for sensitively examining rare-decay processes of the kaon

LAMPF II - also a hyperon factory

International Nuclear Information System (INIS)

Sanford, T.W.L.

1982-06-01

The possibility of generating large numbers of hyperons via an intense 4.5 GeV/c K - beam at LAMPF II is explored. The advantage of using a K - beam over that of using a π beam is examined. Hyperon fluxes and backgrounds are estimated and compared with those available from existing hyperon beams. Production mechanisms are briefly discussed

Nuclear structure studies using the high resolution spectrometer at the Los Alamos Clinton P. Anderson Meson Physics Facility: Progress report, [1986-1987

International Nuclear Information System (INIS)

Hoffmann, G.W.

1986-12-01

A major part of the work done this past year was associated with research conducted at the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF) using the High Resolution Spectrometer (HRS) and the External Proton Beam (EPB). The research focussed on (1) providing p + nucleus data which test nonrelativistic and relativistic models of the medium energy proton + nucleus interaction, (2) providing (p,p) and (p,n) data which are to be analyzed to provide new nuclear structure information (both ground state and excited state), (3) providing nucleon + nucleon data to aid in the systematic study of the fundamental nucleon-nucleon interaction, (4) developing and improving the pA models themselves, and (5) initiating new experimental programs whose goals are to search for new phenomena in nuclear physics

Beam chopper development at LAMPF

International Nuclear Information System (INIS)

Hutson, R.L.; Cooke, D.W.; Heffner, R.H.; Schillaci, M.E.; Dodds, S.A.; Gist, G.A.

1986-01-01

In order to reduce pileup limitations on μSR data rates, a fast chopper for surface muon beams was built and tested at LAMPF. The system allowed one muon at a time to be stopped in a μSR sample in the following way: A surface beam from the LAMPF Stopped Muon Channel was focused through a crossed-field beam separator and onto a chopper slit. With the separator E and B fields adjusted properly, the beam could pass through the slit. The beam to the μSR sample was turned on or off (chopped) rapidly by switching the high voltage applied to the separator plates on or off within approximately 500 ns; with the E field off, the B field deflected the beam, dumping it near the slit. We demonstrated that, with improved electronics, we will be able to stop a single muon in a μSR sample as frequently as once every 20 μs and that data rates for the system can be a factor of five higher than is attainable with unchopped beams. The observed positron contamination of the beam was less than five percent, and the ratio of the muon rate with beam on to the rate with beam off was 1540

Beam chopper development at LAMPF

International Nuclear Information System (INIS)

Hutson, R.L.; Cooke, D.W.; Heffner, R.H.; Schillaci, M.E.; Dodds, S.A.; Gist, G.A.

1986-01-01

In order to reduce pileup limitations on μSR data rates, a fast chopper for surface muon beams was built and tested at LAMPF. The system allowed one muon at a time to be stopped in a μSR sample in the following way: A surface beam from the LAMPF Stopped Muon Channel was focused through a crossed-field beam separator and onto a chopper slit. With the separator E and B fields adjusted properly, the beam could pass through the slit. The beam to the μSR sample was turned on or off (chopped) rapidly by switching the high voltage applied to the separator plates on or off within approximately 500 ns; with the E field off, the B field deflected the beam, dumping it near the slit. We demonstrated that, with improved electronics, we will be able to stop a single muon in a μSR sample as frequently as once every 20 μs and that data rates for the system can be a factor of five higher than is attainable with unchopped beams. The observed positron contamination of the beam was less than five percent, and the ratio of the muon rate with beam on to the rate with beam off was 1540. (orig.)

Spectroscopy of gluonic states at LAMPF II

International Nuclear Information System (INIS)

Chanowitz, M.S.

1983-08-01

The properties of QCD which imply the existence of gluonic states are reviewed. The problem of discovering the spectrum of gluonic states is discussed in general and illustrated with examples from current data. Higher statistics fixed target experiments, such as could be performed at LAMPF II, are essential for further progress

Some beam-loading problems in LAMPF II

International Nuclear Information System (INIS)

Wang, T.S.F.; Warren, J.L.

1985-01-01

Some beam-loading problems are investigated for the proposed LAMPF II synchrotron main ring and booster. Estimations for the feedback control requirements to reduce the power consumption, by accelerating protons beyond the Robinson stability limit, are provided. The results indicate that it is technically feasible to realize this kind of power-saving idea

Annotated bibliography of LAMPF research and development

Energy Technology Data Exchange (ETDEWEB)

Jameson, R.A.; Roybal, E.U.

1978-08-01

A bibliography on published and in-house technical material written on LAMPF activities since its inception is presented. Subject and author concordances provide cross-reference to detailed citations, which include an abstract and notes on the material. The bibliography resides in a computer database that can be searched for key words and phrases.

Annotated bibliography of LAMPF research and development

International Nuclear Information System (INIS)

Jameson, R.A.; Roybal, E.U.

1978-08-01

A bibliography on published and in-house technical material written on LAMPF activities since its inception is presented. Subject and author concordances provide cross-reference to detailed citations, which include an abstract and notes on the material. The bibliography resides in a computer database that can be searched for key words and phrases

National Biomedical Tracer Facility: Project definition study

International Nuclear Information System (INIS)

Heaton, R.; Peterson, E.; Smith, P.

1995-01-01

The Los Alamos National Laboratory is an ideal institution and New Mexico is an ideal location for siting the National Biomedical Tracer Facility (NBTF). The essence of the Los Alamos proposal is the development of two complementary irradiation facilities that combined with our existing radiochemical processing hot cell facilities and waste handling and disposal facilities provide a low cost alternative to other proposals that seek to satisfy the objectives of the NBTF. We propose the construction of a 30 MeV cyclotron facility at the site of the radiochemical facilities, and the construction of a 100 MeV target station at LAMPF to satisfy the requirements and objectives of the NBTF. We do not require any modifications to our existing radiochemical processing hot cell facilities or our waste treatment and disposal facilities to accomplish the objectives of the NBTF. The total capital cost for the facility defined by the project definition study is $15.2 M. This cost estimate includes $9.9 M for the cyclotron and associated facility, $2.0 M for the 100 MeV target station at LAMPF, and $3.3 M for design

National Biomedical Tracer Facility: Project definition study

Energy Technology Data Exchange (ETDEWEB)

Heaton, R.; Peterson, E. [Los Alamos National Lab., NM (United States); Smith, P. [Smith (P.A.) Concepts and Designs (United States)

1995-05-31

The Los Alamos National Laboratory is an ideal institution and New Mexico is an ideal location for siting the National Biomedical Tracer Facility (NBTF). The essence of the Los Alamos proposal is the development of two complementary irradiation facilities that combined with our existing radiochemical processing hot cell facilities and waste handling and disposal facilities provide a low cost alternative to other proposals that seek to satisfy the objectives of the NBTF. We propose the construction of a 30 MeV cyclotron facility at the site of the radiochemical facilities, and the construction of a 100 MeV target station at LAMPF to satisfy the requirements and objectives of the NBTF. We do not require any modifications to our existing radiochemical processing hot cell facilities or our waste treatment and disposal facilities to accomplish the objectives of the NBTF. The total capital cost for the facility defined by the project definition study is $15.2 M. This cost estimate includes $9.9 M for the cyclotron and associated facility, $2.0 M for the 100 MeV target station at LAMPF, and $3.3 M for design.

LAMPF first-fault identifier for fast transient faults

International Nuclear Information System (INIS)

Swanson, A.R.; Hill, R.E.

1979-01-01

The LAMPF accelerator is presently producing 800-MeV proton beams at 0.5 mA average current. Machine protection for such a high-intensity accelerator requires a fast shutdown mechanism, which can turn off the beam within a few microseconds of the occurrence of a machine fault. The resulting beam unloading transients cause the rf systems to exceed control loop tolerances and consequently generate multiple fault indications for identification by the control computer. The problem is to isolate the primary fault or cause of beam shutdown while disregarding as many as 50 secondary fault indications that occur as a result of beam shutdown. The LAMPF First-Fault Identifier (FFI) for fast transient faults is operational and has proven capable of first-fault identification. The FFI design utilized features of the Fast Protection System that were previously implemented for beam chopping and rf power conservation. No software changes were required

Current experiments in elementary-particle physics

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Rittenberg, A.

1983-03-01

Microfiche are included which contain summaries of 479 experiments in elementary particle physics. Experiments are included at the following laboratories: Brookhaven (BNL); CERN; CESR; DESY; Fermilab (FNAL); Institute for Nuclear Studies (INS); KEK; LAMPF; Serpukhov (SERP); SIN; SLAC; and TRIUMF. Also, summaries of proton decay experiments are included. A list of experiments and titles is included; and a beam-target-momentum index and a spokesperson index are given. Properties of beams at the facilities are tabulated

UCLA intermediate energy nuclear physics and relativistic heavy ion physics. Annual report, February 1, 1983-January 31, 1984

International Nuclear Information System (INIS)

1984-01-01

In this contract year the UCLA Intermediate Energy Group has continued to pursue a general set of problems in intermediate energy physics using new research tools and theoretical insights. Our program to study N-N scattering and proton-light nucleus scattering has been enhanced by a new polarized target facility (both hydrogen and deuterium) at the High Resolution Spectrometer (HRS) of the Los Alamos Meson Physics Facility (LAMPF). This facility has been constructed by our group in collaboration with physicists from KEK, LAMPF and the University of Minnesota; and the first set of experiments studying polarized beam-polarized target scattering at the HRS were completed this summer and early fall. The HRS mode of operation has led to some unique design features which are described. At the Bevalac, a new beam line spectrometer will be constructed for us during this year and next to significantly enhance our capability to study subthreshold k + , k - and anti p production in relativistic heavy ion collisions and to search for fractionally charged particles. During this period a proposal is being prepared for a very large acceptance spectrometer and its associated beam line which will be used to detect dilepton pairs produced in relativistic heavy ion collisions. In concert with these experimental projects, theoretical advances in the understanding of new data from the HRS, particularly spin transfer data, have been made by the UCLA group and are described

Biomedical applications of medium energy particle beams at LAMPF

International Nuclear Information System (INIS)

Bradbury, J.N.

1978-01-01

At LAMPF an 800-MeV proton accelerator is used to produce intense beams of secondary protons, pi mesons, and muons which are being employed in several areas of biomedical research. The primary proton beam is used to produce short-lived radioisotopes of clinical interest. Carefully tailored secondary proton beams are used to obtain density reconstructions of samples with a dose much less than that required by x-ray CT scanners. The elemental composition of tissue samples is being determined non-destructively with muonic x-ray analysis. Finally, an extensive program, with physical, biological, and clinical components, is underway to evaluate negative pi mesons for use in cancer radiotherapy. The techniques used in these experiments and recent results are described

[Intermediate energy nuclear physics

International Nuclear Information System (INIS)

1989-01-01

This report summarizes work in experimental Intermediate Energy Nuclear Physics carried out between October 1, 1988 and October 1, 1989 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under grant DE-FG02-86ER-40269 with the United States Department of Energy. The experimental program is very broadly based, including pion-nucleon studies at TRIUMF, inelastic pion scattering and charge exchange reactions at LAMPF, and nucleon charge exchange at LAMPF/WNR. In addition, a number of other topics related to accelerator physics are described in this report

Nuclear structure studies using the high resolution spectrometer at the Los Alamos Clinton P. Anderson Meson Physics Facility: Annual progress report, [1987-1988

International Nuclear Information System (INIS)

1987-09-01

This document constitutes the (1987 to 1988) progress report for the ongoing medium energy nuclear physics research program supported by the US Department of Energy with the University of Texas at Austin. A major part of the work has been and will continue to be associated with research done at the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF) using the High Resolution Spectrometer (HRS), the External Proton Beam (EPB), and the new Neutron Time of Flight Facility (NTOF). Other research is done at the Fermi National Accelerator Laboratory (FNAL). The research focuses on (1) providing proton + nucleus data which test nonrelativistic and relativistic models of the medium energy proton + nucleus interaction, (2) providing (p,p) and (p,n) data which are to be analyzed to provide new nuclear structure information (both ground state and excited state), (3) providing nucleon + nucleon data to aid in the systematic study of the fundamental nucleon-nucleon interaction, (4) developing and improving the proton + nucleus theoretical models themselves, and (5) initiating new experimental programs whose goals are to search for new phenomena in nuclear physics. 182 refs., 71 figs., 5 tabs

Reference design for LAMPF II

International Nuclear Information System (INIS)

Thiessen, H.A.

1983-01-01

A reference design for the 32-GeV LAMPF II proton accelerator is proposed. This design consists of a 30-Hz rapid-cycling synchrotron with a dc stretcher. A superiodicity 5 design with dispersion-free straight sections is suggested for both machines. Beam-dynamics calculations are partially complete and rf requirements are given. Apertures are calculated for 2 x 10 13 protons per pulse (100 μA average current). No significant problems are observed at any time in the cycle in a longitudinal beam-dynamics simulation including space charge

Physics and a plan for a 45 GeV facility that extends the high-intensity capability in nuclear and particle physics

International Nuclear Information System (INIS)

1986-05-01

A proposed program of physics research to be carried out at a 45 GeV high-intensity proton accelerator is discussed. In addition to a general discussion of the potentially most productive research directions, specific experiments in strong and flavor physics are presented. The proposed strong interaction physics deals with investigation of nonperturbative QCD through the study of exotic hadrons and measurement of nuclear medium effects on flavor-specific quark momentum distribution. The major part of the proposed program in flavor interaction physics probes possible physics beyond the minimal standard model. A design using two synchrotrons produces a 45 GeV proton beam by increasing the energy of the present LAMPF 800 MeV beam. A booster operating at 60 Hz accelerates 144 μA from 800 MeV to 6 GeV while the main ring operating at 3.33 Hz accelerates 32 μA from 6 GeV to 45 GeV. The 112 μA at 6 GeV which is not further accelerated is used to create intense beams of neutrinos and pulsed muons. The 32 μA of 45 GeV beam is slow extracted into an existing experimental area in which a large number of high-intensity, high-purity kaon and other secondary beams will be produced. A proposed layout of the experimental areas along with the characteristics of the secondary beams is also presented. The report concludes with a cost estimate to construct such a facility at Los Alamos

Studies in medium energy physics

International Nuclear Information System (INIS)

Green, A.; Hoffmann, G.W.; McDonough, J.; Purcell, M.J.; Ray, R.L.; Read, D.E.; Worn, S.D.

1991-12-01

This document constitutes the (1991--1992) technical progress report and continuation proposal for the ongoing medium energy nuclear physics research program supported by the US Department of Energy through special Research Grant DE-FG05-88ER40444. The experiments discussed are conducted at the Los Alamos National Laboratory's (LANL) Clinton P. Anderson Meson Physics Facility (LAMPF) and the Alternating Gradient Synchrotron (AGS) facility of the Brookhaven National Laboratory (BNL). The overall motivation for the work discussed in this document is driven by three main objectives: (1) provide hadron-nucleon and hadron-nucleus scattering data which serve to facilitate the study of effective two-body interactions, test (and possibly determine) nuclear structure, and help study reaction mechanisms and dynamics; (2) provide unique, first-of-a-kind ''exploratory'' hadron-nucleus scattering data in the hope that such data will lead to discovery of new phenomena and new physics; and (3) perform precision tests of fundamental interactions, such as rare decay searches, whose observation would imply fundamental new physics

Simulation studies of the LAMPF proton linac

International Nuclear Information System (INIS)

Garnett, R.W.; Gray, E.R.; Rybarcyk, L.J.; Wangler, T.P.

1995-01-01

The LAMPF accelerator consists of two 0.75-MeV injectors, one for H + and the other for H - , a separate low-energy beam transport (LEBT) line for each beam species, a 0.75 to 100-MeV drift-tube linac (DTL) operating at 201.25-MHz, a 100-MeV transition region (TR), and a 100 to 800-MeV side-coupled linac (SCL) operating at 805-MHz. Each LEBT line consists of a series of quadrupoles to transport and transversely match the beam. The LEBT also contains a prebuncher, a main buncher, and an electrostatic deflector. The deflector is used to limit the fraction of a macropulse which is seen by the beam diagnostics throughout the linac. The DTL consists of four rf tanks and uses singlet FODO transverse focusing. The focusing period is doubled in the last two tanks by placing a quadrupole only in every other drift-tube. Doublet FDO transverse focusing is used in the SCL. The TR consists of separate transport lines for the H + and H - beams. The pathlengths for the two beams differ, by introducing bends, so as to delay arrival of one beam relative to the other and thereby produce the desired macropulse time structure. Peak beam currents typically range from 12 to 18-mA for varying macropulse lengths which give an average beam current of 1-mA. The number of particles per bunch is of the order 10 8 . The work presented here is an extension of previous work. The authors have attempted to do a more complete simulation by including modeling of the LEBT. No measurements of the longitudinal structure of the beam, except phase-scans, are performed at LAMPF. The authors show that, based on simulation results, the primary causes of beam spill are inefficient longitudinal capture and the lack of longitudinal matching. Measurements to support these claims are not presently made at LAMPF. However, agreement between measurement and simulation for the transverse beam properties and transmissions serve to benchmark the simulations

Experience at the Los Alamos Meson Physics Facility with the use of alloy Inconel 718 as an enclosure for a beam degrader and as a proton beam entry window

International Nuclear Information System (INIS)

Sommer, W.F.; Ferguson, P.D.; Brown, R.D.; Cedillo, C.M.; Zimmerman, E.

1994-01-01

Operation of the Los Alamos Meson Physics Facility (LAMPF) began in 1972 and continues at present. An injector delivers protons to a 0.8 kin long linear accelerator which produces a particle energy of 800 MeV; the protons are then transported to a variety of experimental areas. The proton beam is transported in a vacuum tube, controlled and bent by electromagnets. The highest intensity beam, at a maximum level of 1 mA, is delivered to the experimental area designated as Area A. At the end of the experimental area, the beam is transported through an interface between beamline vacuum and one atmosphere air pressure. This interface is made of metal and is generally referred to as a beam entry window. At LAMPF, after the beam has exited the vacuum tube, it becomes incident on a number of experiments or ''targets.'' These include capsules for radiation damage studies, a beam ''degrader'' for the long-term neutrino experiment, and as many nine targets in the Isotope Production (IP) stringer system used to produce medically significant isotopes. Following the IP system is a beam stop used for the purpose its name implies. The beam stop also contains a beam entry window, whose purpose is to separate the 250 psig water cooling environment from I atmosphere of air. The beam entry window, the beam degrader, and the beam stop window are made of alloy Inconel 718, have endured a lengthy irradiation service time at LAMPF, and are the subject of this report

Performance of the LAMPF particle separator

International Nuclear Information System (INIS)

Liska, D.J.; Dauelsberg, L.B.

1977-01-01

The electrostatic beam separator in the EPICS channel at LAMPF is now nearly fully operational. Improvements to the high voltage transmission system and the electronic controls as well as a higher quality channel vacuum have allowed the unit to be operated at its design field strengths. The bias electrode has proven to be useful in reducing ion-exchange currents and associated electrode heating. The detachable shielding and other apparatus for removing the separator from the activated channel was perfected and its application is described

Experiment to study K+ → π+ + ''nothing'' at LAMPF II

International Nuclear Information System (INIS)

Marlow, D.R.

1985-05-01

An experiment to measure K + → π + + ''nothing'' (where ''nothing'' denotes unobservable neutral particles) at LAMPF II is described. This experiment is capable of measuring one K + → π + nu anti nu event for branching ratio of 10 -12 . 12 refs

Review of proposed kaon factory facilities

International Nuclear Information System (INIS)

Macek, R.J.

1985-01-01

A number of proton accelerator facilities, popularly called ''Kaon Factories,'' have been proposed to extend the intensity frontier from about 1 GeV to higher energies in the range of 15 to 45 GeV. Seven proposed facilities - LAMPF II, TRIUMF II, SIN II, AGS II, KEK, MUNICH, and KYOTO - are reviewed with emphasis on capabilities of the experimental facilities. Costs and the choice of energy and current are also discussed. 7 refs., 29 figs., 7 tabs

High energy physics at UC Riverside

International Nuclear Information System (INIS)

1997-01-01

This report discusses progress made for the following two tasks: experimental high energy physics, Task A, and theoretical high energy physics, Task B. Task A1 covers hadron collider physics. Information for Task A1 includes: personnel/talks/publications; D0: proton-antiproton interactions at 2 TeV; SDC: proton-proton interactions at 40 TeV; computing facilities; equipment needs; and budget notes. The physics program of Task A2 has been the systematic study of leptons and hadrons. Information covered for Task A2 includes: personnel/talks/publications; OPAL at LEP; OPAL at LEP200; CMS at LHC; the RD5 experiment; LSND at LAMPF; and budget notes. The research activities of the Theory Group are briefly discussed and a list of completed or published papers for this period is given

A search for bar νe appearance from stopped π+ and μ+ decay at LAMPF [Los Alamos Meson Physics Facility

International Nuclear Information System (INIS)

Fujikawa, B.K.

1990-01-01

We report on a recent search for bar ν e appearance from stopped π + → μ + ν μ and μ + → e + ν e bar ν μ decay made by the LAMPF experiment E645. The appearance of bar ν e may occur from bar ν μ → bar ν e , ν e → bar ν eL , or ν μ → bar ν eL oscillations. Appearance may also occur from rare μ + → e + bar ν e ν μ decay, which is allowed by a multiplicative lepton charge conservation law. The neutrino energies range from E ν = 0 to 52.8MeV. The neutrino detector, which is located 26.1 meters from the neutrino source, consists of a segmented liquid scintillator and proportional drift tube central detector surrounded by both active and passive shielding. The central detector detects bar ν e through the bar ν e p → ne + Charge Current (CC) reaction, which is signaled by the direct detection of the final state positron and neutron. The hydrogen-rich liquid scintillators act as free proton targets for the bar ν e p CC reaction. The neutrons are detected through radiative neutron capture on gadolinium. We find no evidence for bar ν e appearance in the first year of running. New limits on the bar ν μ ,ν e ,ν μ → bar ν e oscillation parameters and the rare μ + → e + bar ν e ν μ decay branching ratio are presented. 87 refs., 45 figs., 17 tabs

Design of a π0 spectrometer at LAMPF

International Nuclear Information System (INIS)

Heffner, R.

1976-01-01

A discussion is given of the salient features for the design of a π 0 spectrometer being constructed at LAMPF. The basic concepts of π 0 detection are explained, and the expected performance and mechanical design of the instrument are discussed. A list of intended experiments to be undertaken is given. The spectrometer is intended to be used for pion-charge-exchange and production reactions with nuclear targets

Monitor: a short-cut approach to remote-handling at LAMPF

International Nuclear Information System (INIS)

Horne, R.A.; Ekberg, E.L.

1975-01-01

The monitor, constructed from relatively cheap commercial components, is a straightforward, totally remotely operated handling system intended to work on components in the LAMPF external beam line or elsewhere. It can be towed or lifted into position, then hard-wire controlled from a distance by using television. (auth)

Experimental investigations in particle physics at intermediate energies. Progress report, December 1, 1981-November 30, 1982

International Nuclear Information System (INIS)

Auerbach, L.B.; Highland, V.L.; McFarlane, W.K.

1982-08-01

The analysis of the pion-beta decay experiment is complete, with an improvement in accuracy of a factor of two over previous work. Preparations for the search for bound states in anti pp at CERN using the LEAR facility are well advanced. The proposal to use the Crystal Box at LAMPF for a new pi-zero-to-three-gamma experiment has been approved. Work on the neutrino experiment proposal (No. 638) at LAMPF has continued. We expect to make some contributions to the proposal for LAMPF II in the coming months

Development of a high current H- injector for the proton storage ring at LAMPF

International Nuclear Information System (INIS)

York, R.L.; Stevens, R.R.; DeHaven, R.A.; McConnell, J.R.; Chamberlin, E.P.; Kandarian, R.

1984-01-01

A new high-current H - injector has been installed at LAMPF for the Proton Storage Ring. The injector is equipped with a multicusp surface-production H - ion source that was developed at LAMPF. The ion source is capable of long-term operation at 20 mA of H - current at 10% duty factor and with normalized beam emittance of 0.08 cm-mrad (95% beam fraction). Details of the development program, the injector design, and initial operating experience are discussed. Included in the discussion is a comparison of intensity and emittance measurements of the same H - beam at 100 keV and 750 keV. 4 references, 6 figures

Pion beam development for the LAMPF biomedical project

International Nuclear Information System (INIS)

Paciotti, M.; Amols, H.; Bradbury, J.; Rivera, O.; Hogstrom, K.; Smith, A.; Inoue, H.; Laubacher, D.; Sandford, S.

1979-01-01

Common to both static and dynamic patient irradiations at the LAMPF linac is the problem of maintaining good quality control of beams form a secondary channel. A major contributor to therapy beam variation has been change in electron contamination due to the change in target geometry and proton beam steering. The electron variation problem is described and a solution is presented that has been realized as a result o a new target geometry that allows some control of the electron fraction

Muon-catalyzed fusion experiments at LAMPF

International Nuclear Information System (INIS)

Caffrey, A.J.; Anderson, A.N.; Van Siclen, C.D.W.

1986-01-01

Our collaboration has conducted a series of muon-catalysis experiments over broad temperature and density ranges at the LAMPF accelerator in Los Alamos. We have discovered surprising effects on the normalized muon-catalysis cycling rate, λ/sub c/, and the apparent alpha-particle sticking coefficient, ω/sub s/, that depend on the d-t mixture density. This paper reviews our experimental approach, analysis methods, and results for tests with targets varying in density from 0.12 to 1.30, normalized to liquid hydrogen density, and in temperature from 15K to 800K. In particular, results will be presented on the cycling rate, sticking coefficient, and 3 He scavenging rate, as functions of temperature, mixture density, or tritium concentration

Research in experimental nuclear physics: Progress report, April 1, 1988--March 31, 1989

International Nuclear Information System (INIS)

Moore, C.F.

1988-11-01

This report summarizes the work carried out by personnel from the University of Texas at Austin at the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF) during the calendar year 1987 under grant AS05-87ER40343 between The University of Texas at Austin and the United States Department of Energy. The research activities involved experiments done with the Energetic Pion Channel and Spectrometer (EPICS), the Low Energy Pion Channel (LEP), the Pion and Particle Physics Channel (P 3 ), and the High Resolution Spectrometer (HRS). A brief overview of work supported by this grant is given. This report contains a list of abstracts of papers reported at scientific meetings, a list of invited papers, and a list of published papers and preprints. These papers summarize experiments undertaken in this grant period and indicate the work accomplished by the participants in this program of medium energy nuclear physics research. Much of the experimental work that has been attempted during the period covered by this report has either been published or submitted for publication. Also included is a list of the recent proposals on which we have participation at LAMPF, and a list of personnel who have participated in this research program

Nuclear Physics Laboratory technical progress report

International Nuclear Information System (INIS)

1991-01-01

This contract supports broadly based experimental work in intermediate energy nuclear physics. The program includes pion- nucleon studies at TRIUMF and LAMPF, inelastic pion scattering and charge exchange reactions at LAMPF, and nucleon charge exchange at LAMPF/NTOF. The first results of spin-transfer observables in the isovector (rvec p,rvec n) reaction are included in this report. Our data confirm the tentative result from (rvec p,rvec p) reactions that the nuclear isovector spin response shows neither longitudinal enhancement nor transverse quenching. Our program in quasifree scattering of high energy pions shows solid evidence of isoscalar enhancement of the nuclear nonspin response. We include several comparisons of the quasifree scattering of different probes. Results from our efforts in the design of accelerator RF cavities are also included in this report

LAMPF transition-region mechanical fabrication

International Nuclear Information System (INIS)

Bush, E.D. Jr.; Gallegos, J.D.F.; Harrison, R.; Hart, V.E.; Hunter, W.T.; Rislove, S.E.; Sims, J.R.; Van Dyke, W.J.

1984-07-01

The primary purpose of the new Transition Region (TR-II) is to optimize the phase matching of the H + and H - beams during simultaneous transport. TR-II incorporates several design improvements that include larger aperture, a straight beam track, greater beam-path length adjustments, and utility lines integrated with the support system. The close pack density of magnets and beam-line hardware required innovative solutions to magnet design and mounting, vacuum manifolding, and utility routing. Critical magnet placement was accomplished using a new three-dimensional alignment system that does real-time vector calculations on a computer with input from two digital theodolites. All assembly and a large fraction of the mechanical fabrication were done by LAMPF personnel. The TR-II has been operational since September 1983 and routinely transports production beams up to 900-μA current with no major problems

Medium-energy physics program. Progress report, February 1--April 1, 1976

Energy Technology Data Exchange (ETDEWEB)

Dunn, E. (comp.)

1976-09-01

A quarterly report on the medium-energy physics program at LAMPF is given. Topics covered include: (1) engineering support; (2) accelerator support; (3) accelerator systems development; (4) injector systems; (5) electronic instrumentation and computer systems; (6) accelerator operations; (7) experimental areas; (8) beam line development; (9) large-spectrometer systems; (10) research; (11) nuclear chemistry; (12) practical applications of LAMPF; and (13) management. (PMA)

Medium-energy physics program. Progress report, February 1--April 1, 1976

International Nuclear Information System (INIS)

Dunn, E.

1976-09-01

A quarterly report on the medium-energy physics program at LAMPF is given. Topics covered include: (1) engineering support; (2) accelerator support; (3) accelerator systems development; (4) injector systems; (5) electronic instrumentation and computer systems; (6) accelerator operations; (7) experimental areas; (8) beam line development; (9) large-spectrometer systems; (10) research; (11) nuclear chemistry; (12) practical applications of LAMPF; and (13) management

Δt tuneup procedure for the LAMPF 805-MHz linac

International Nuclear Information System (INIS)

Crandall, K.R.

1976-05-01

An important part of tuning the LAMPF accelerator is the adjustment of the phases and amplitudes in the 805-MHz linac. The technique used is called the Δt procedure because of the time-of-flight measurements that are required. The theory behind the Δt procedure, a brief description of the hardware, and a description of the many computer programs that have been written to implement the procedure are presented

Recent operating experience with the H- ion injector at LAMPF/LANSCE

International Nuclear Information System (INIS)

Ingalls, W.B.; Stelzer, J.E.; Williams, H.E. III.

1996-01-01

A cusp-field cesium conversion ion source has provided H - beams at LAMPF/LANSCE since 1984. three interchangeable sources are now used during beam production cycles to minimize down time during scheduled source change-outs. Ion source change-outs are scheduled to prevent unscheduled loss of beam time due to finite filament lifetime. Ion source operating parameters and filament lifetime data are presented

Status of the new high intensity H- injector at LAMPF

International Nuclear Information System (INIS)

Stevens, R.R. Jr.; York, R.L.; McConnell, J.R.; Kandarian, R.

1984-04-01

The requirement for higher intensity H - ion beams for the proton storage ring now being constructed at LAMPF necessitated the development of a new H - ion source and the rebuilding of the original H - injector and its associated beam transport lines. The goal of the ion source development program was to produce an H - beam with a peak intensity of 20 mA at 10% duty factor and with a beam emittance of less than 0.08 cm-mrad normalized at 95% beam fraction. The ion source concept which was best suited to our requirements was the multicusp, surface-production source developed for neutral beam injectors at Berkeley by Ehlers and Leung. An accelerator version of this source has been subsequently developed at Los Alamos to meet these storage ring requirements. The use of these higher intensity H - beams, together with the more stringent chopping and bunching requirements entailed in the operation of the storage ring, now requires rebuilding the entire H - injector at LAMPF. This construction is in progress. It is anticipated that the new injector will be fully operational by the end of 1984 and that the required H - beams will be available for the operation of the storage ring in early 1985

A proposal to extend the intensity frontier of nuclear and particle physics to 45 GeV (LAMPF 2)

International Nuclear Information System (INIS)

1984-12-01

It is proposed to construct and operate a high-intensity, medium energy synchrotron addition to the Clinton P. Anderson Meson Physics Facility. The addition is to consist of a 6-GeV, 170-μA booster and a 45-GeV, 34-μA, 3-Hz main synchrotron with 50% duty factor. The physics of strong and electroweak interactions to be studied at the facility is discussed, as well as accelerator design, scope of experimental area facilities, and cost estimates and schedule

ATW neutron spectrum measurements at LAMPF

Energy Technology Data Exchange (ETDEWEB)

Butler, G.W.; Littleton, P.E.; Morgan, G.L. [Los Alamos National Laboratory, NM (United States)] [and others

1995-10-01

Accelerator transmutation of waste (ATW) is a proposal to use a high flux of accelerator-produced thermalized neutrons to transmute both fission product and higher actinide commercial nuclear waste into stable or short-lived radioactive species in order to avoid long-term storage of nuclear waste. At LAMPF the authors recently performed experiments that were designed to measure the spectrum of neutrons produced per incident proton for full-scale proposed ATW targets of lead and lithium. The neutrons produced in such targets have a spectrum of energies that extends up to the energy of the incident proton beam, but the distribution peaks between 1 and 5 MeV. Transmutation reactions and fission of actinides are most efficient when the neutron energy is below a few eV, so the target must be surrounded by a non-absorbing material (blanket) to produce additional neutrons and reduce the energy of high energy neutrons without loss. The experiments with the lead target, 25 cm diameter by 40 cm long, were conducted with 800 MeV protons, while those with the lithium target, 25 cm diameter by 175 cm long, were conducted with 400 MeV protons. The blanket in both sets of experiments was a 60 cm diameter by 200 cm long annulus of lead that surrounded the target. Surrounding the blanket was a steel water tank with dimensions of 250 cm diameter by 300 cm long that simulated the transmutation region. A small sample pipe penetrated the length of the lead blanket and other sample pipes penetrated the length of the water tank at different radii from the beam axis so that the neutron spectra at different locations could be measured by foil activation. After irradiation the activated foil sets were extracted and counted with calibrated high resolution germanium gamma ray detectors at the Los Alamos nuclear chemistry counting facility.

MP-Division health and safety reference handbook

International Nuclear Information System (INIS)

Putnam, T.M.

1987-09-01

This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs

MP-Division health and safety reference handbook. [Contains glossary

Energy Technology Data Exchange (ETDEWEB)

Putnam, T.M.

1987-09-01

This report presents the objectives, organization, policies, and essential rules and procedures that have been adopted by MP Division and that form the basis of the Health and Safety Program of the Clinton P. Anderson Meson Physics Facility (LAMPF). The facility includes the beam-delivery systems for the Los Alamos Neutron Scattering Center and the Weapons Neutron Research Facility (LANSCE/WNR). The program is designed not only to assure the health and safety of all personnel, including users, in their work at LAMPF, and of MP-Division staff in their work on the LANSCE/WNR beam lines, but also to protect the facility (buildings and equipment) and the environment. 33 refs., 18 figs., 2 tabs.

Optimizing data access in the LAMPF control system

International Nuclear Information System (INIS)

Schaller, S.C.; Corley, J.K.; Rose, P.A.

1985-01-01

The LAMPF control system data access software offers considerable power and flexibility to application programs through symbolic device naming and an emphasis on hardware independence. This paper discusses optimizations aimed at improving the performance of the data access software while retaining these capabilities. The only aspects of the optimizations visible to the application programs are ''vector devices'' and ''aggregate devices.'' A vector device accesses a set of hardware related data items through a single device name. Aggregate devices allow run-time optimization of references to groups of unrelated devices. Optimizations not visible on the application level include careful handling of: network message traffic; the sharing of global resources; and storage allocation

Proceedings of the workshop on LAMPF II synchrotron

International Nuclear Information System (INIS)

Cooper, R.K.

1983-01-01

Topics covered at the workshop include: considerations for a staged approach to synchrotron construction; consideration of energy and cost for a kaon and/or antiproton factory; changing the transition energy in the main ring for the Fermilab antiproton beam; a lattice with 50% undispersed straight sections; bunch width considerations in a stretcher ring; a self-consistent longitudinal distribution; rapid-cycling tuned rf cavity for synchrotron use; considerations on a high-shunt impedance tunable RF cavity; rotating condensers; low extraction from the stretcher ring; an antiproton source for LAMPF II; synchrotron magnet circuit; power supply and ring magnet options; and notes for a kaon factory design

Mound facility physical characterization

Energy Technology Data Exchange (ETDEWEB)

Tonne, W.R.; Alexander, B.M.; Cage, M.R.; Hase, E.H.; Schmidt, M.J.; Schneider, J.E.; Slusher, W.; Todd, J.E.

1993-12-01

The purpose of this report is to provide a baseline physical characterization of Mound`s facilities as of September 1993. The baseline characterizations are to be used in the development of long-term future use strategy development for the Mound site. This document describes the current missions and alternative future use scenarios for each building. Current mission descriptions cover facility capabilities, physical resources required to support operations, current safety envelope and current status of facilities. Future use scenarios identify potential alternative future uses, facility modifications required for likely use, facility modifications of other uses, changes to safety envelope for the likely use, cleanup criteria for each future use scenario, and disposition of surplus equipment. This Introductory Chapter includes an Executive Summary that contains narrative on the Functional Unit Material Condition, Current Facility Status, Listing of Buildings, Space Plans, Summary of Maintenance Program and Repair Backlog, Environmental Restoration, and Decontamination and Decommissioning Programs. Under Section B, Site Description, is a brief listing of the Site PS Development, as well as Current Utility Sources. Section C contains Site Assumptions. A Maintenance Program Overview, as well as Current Deficiencies, is contained within the Maintenance Program Chapter.

Medium energy elementary particle physics

International Nuclear Information System (INIS)

1991-01-01

This report discusses the following topics: muon beam development at LAMPF; muon physics; a new precision measurement of the muon g-2 value; measurement of the spin-dependent structure functions of the neutron and proton; and meson factories

Nuclear Physics Laboratory technical progress report, [August 15, 1991--October 1, 1992

International Nuclear Information System (INIS)

1992-01-01

This report summarizes work carried out between August 15, 1991 and October 1, 1992 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contracts DE-FG02-86ER-40269 and DE-FG02-87ER-40335 with the United States Department of Energy. These contracts support experimental and theoretical work in intermediate energy nuclear physics. The experimental program is very broadly based; it includes pion-nucleon and pion-nucleus studies at Los Alamos and TRIUMF inelastic pion scattering and charge exchange reactions at LAMPF, kaon-nucleus scattering at the AGS, and nucleon charge exchange at LAMPF/NTOF

A superconducting radio-frequency cavity for manipulating the phase space of pion beams at LAMPF

Energy Technology Data Exchange (ETDEWEB)

O' Donnell, J.M.; Davis, J.; DeHaven, R.A.; Gray, E.; Johnson, R.; Lomax, R.E.; McCloud, B.J.; McGill, J.A.; Morris, C.L.; Novak, J.; Rusnak, B.; Tubb, G. (Los Alamos National Lab., Los Alamos, NM (United States)); Applegate, J.M.; Averett, T.D.; Beck, J.; Ritchie, B.G. (Arizona State Univ., Tempe, AZ (United States)); Haebel, E. (CERN, Geneva (Switzerland)); Kiehlmann, D.; Klein, U.; Peniger, M.; Schaefer, P.; Vogel, H. (Siemens AG, Accelerator and Magnet Technology, Bergisch Gladbach (Germany)); Ward, H.; Moore, C.F. (Univ. of Texas, Austin, TX (United States))

1992-07-15

The SCRUNCHER is a superconducting radio-frequency cavity for manipulating the longitudinal phase space of the secondary pion beam from the low energy pion channel at LAMPF. Test results of the cavity performance and initial results from in-beam tests are presented. (orig.).

A superconducting radio-frequency cavity for manipulating the phase space of pion beams at LAMPF

Science.gov (United States)

O'Donnell, J. M.; Davis, J.; DeHaven, R. A.; Gray, E.; Johnson, R.; Lomax, R. E.; McCloud, B. J.; McGill, J. A.; Morris, C. L.; Novak, J.; Rusnak, B.; Tubb, G.; Applegate, J. M.; Averett, T. D.; Beck, J.; Ritchie, B. G.; Haebel, E.; Kiehlmann, D.; Klein, U.; Peiniger, M.; Schäfer, P.; Vogel, H.; Ward, H.; Fred Moore, C.

1992-07-01

The SCRUNCHER is a superconducting radio-frequency cavity for manipulating the longitudinal phase space of the secondary pion beam from the low energy pion channel at LAMPF. Test results of the cavity performance and initial results from in-beam tests are presented.

The multi-disciplinary role of 'pion factories'

International Nuclear Information System (INIS)

Davies, J.D.; Batty, C.J.; Green, K.

1977-01-01

The multi-disciplinary role of intermediate energy proton accelerators in pure and applied nuclear physics is discussed with particular reference to the experimental programmes at LAMPF (Los Alamos Meson Physics Facility) and SIN (Swiss Institute for Nuclear Research, Zurich). (author)

0.8-GeV/c kaon channel for LAMPF II

International Nuclear Information System (INIS)

Lobb, D.E.

1986-07-01

The design for a 0.8-GeV/c charged-kaon channel suitable for LAMPF II features a two-dipole extraction system in the primary proton-beam line, a section to define the phase-space acceptance of the channel, a separator section before a mass slit, and a quadrupole triplet to transmit the kaon beam to an experimental target. A novel feature of this channel is a shaped slit to remove the tail of the pion-beam spot that would be adjacent to the kaon-beam spot at the mass slit

University of Colorado at Boulder Nuclear Physics Laboratory technical progress report

International Nuclear Information System (INIS)

Peterson, R.J.

1991-01-01

This report summarizes experimental work carried out between October 1, 1990, the closing of our Progress Report, and August 14, 1991 at the Nuclear Physics Laboratory of the University of Colorado, Boulder, under contract DE-FG02-ER40269 with the United States Department of Energy. This contract supports broadly based experimental work in intermediate energy nuclear physics. The program includes pion-nucleon studies at TRIUMF and LAMPF, inelastic pion scattering and charge exchange reactions at LAMPF, and nucleon charge exchange at LAMPF/NTOF. The first results of spin-transfer observables in the isovector (rvec p,rvec n) reaction are included in this report. Our data confirm the tentative result from (rvec p,rvec p') reactions that the nuclear isovector spin response shows neither longitudinal enhancement nor transverse queching. Our program in quasifree scattering of high energy pions shows solid evidence of isoscalar enhancement of the nuclear nonspin response. We include several comparisons of the quasifree scattering of different probes. Results from our efforts in the design of accelerator RF cavities are also included in this report

Radioisotope research and development at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Peterson, E.J.

1993-01-01

Throughout its fifty year history, Los Alamos National Laboratory has conducted research and development in the production, isolation, purification, and application of radioactive isotopes. Initially this work supported the weapons development mission of the Laboratory. Over the years the work has evolved to support basic and applied research in many diverse fields, including nuclear medicine, biomedical studies, materials science, environmental research and the physical sciences. In the early 1970s people in the Medical Radioisotope Research Program began irradiating targets at the Los Alamos Meson Physics Facility (LAMPF) to investigate the production and recovery of medically important radioisotopes. Since then spallation production using the high intensity beam at LAMPF has become a significant source of many important radioisotopes. Los Alamos posesses other facilities with isotope production capabilities. Examples are the Omega West Reactor (OWR) and the Van de Graaf Ion Beam Facility (IBF). Historically these facilities have had limited availability for radioisotope production, but recent developments portend a significant radioisotope production mission in the future

Experiments in intermediate energy physics

International Nuclear Information System (INIS)

Dehnhard, D.

2003-01-01

Research in experimental nuclear physics was done from 1979 to 2002 primarily at intermediate energy facilities that provide pion, proton, and kaon beams. Particularly successful has been the work at the Los Alamos Meson Physics Facility (LAMPF) on unraveling the neutron and proton contributions to nuclear ground state and transition densities. This work was done on a wide variety of nuclei and with great detail on the carbon, oxygen, and helium isotopes. Some of the investigations involved the use of polarized targets which allowed the extraction of information on the spin-dependent part of the triangle-nucleon interaction. At the Indiana University Cyclotron Facility (IUCF) we studied proton-induced charge exchange reactions with results of importance to astrophysics and the nuclear few-body problem. During the first few years, the analysis of heavy-ion nucleus scattering data that had been taken prior to 1979 was completed. During the last few years we created hypernuclei by use of a kaon beam at Brookhaven National Laboratory (BNL) and an electron beam at Jefferson Laboratory (JLab). The data taken at BNL for a study of the non-mesonic weak decay of the A particle in a nucleus are still under analysis by our collaborators. The work at JLab resulted in the best resolution hypernuclear spectra measured thus far with magnetic spectrometers

Experiments in intermediate energy physics

Energy Technology Data Exchange (ETDEWEB)

Dehnhard, D.

2003-02-28

Research in experimental nuclear physics was done from 1979 to 2002 primarily at intermediate energy facilities that provide pion, proton, and kaon beams. Particularly successful has been the work at the Los Alamos Meson Physics Facility (LAMPF) on unraveling the neutron and proton contributions to nuclear ground state and transition densities. This work was done on a wide variety of nuclei and with great detail on the carbon, oxygen, and helium isotopes. Some of the investigations involved the use of polarized targets which allowed the extraction of information on the spin-dependent part of the triangle-nucleon interaction. At the Indiana University Cyclotron Facility (IUCF) we studied proton-induced charge exchange reactions with results of importance to astrophysics and the nuclear few-body problem. During the first few years, the analysis of heavy-ion nucleus scattering data that had been taken prior to 1979 was completed. During the last few years we created hypernuclei by use of a kaon beam at Brookhaven National Laboratory (BNL) and an electron beam at Jefferson Laboratory (JLab). The data taken at BNL for a study of the non-mesonic weak decay of the A particle in a nucleus are still under analysis by our collaborators. The work at JLab resulted in the best resolution hypernuclear spectra measured thus far with magnetic spectrometers.

Research in elementary particle physics. Progress report, March 1, 1994--February 28, 1995

International Nuclear Information System (INIS)

Chan, Lai-Him; Haymaker, R.; Imlay, R.; McNeil, R.; Metcalf, W.; Svoboda, R.

1994-01-01

This report discusses the following topics: Low-energy particle dynamics; QCD dynamics on the lattice; lattice QCD Vacuum; phenomenology ampersand cosmology; the ZEUS Experiment at HERA; neutrino physics at LAMPF; non-accelerator physics; and SSC activity

Proceedings of the workshop on nuclear and particle physics at energies up to 31 GeV: new and future aspects

International Nuclear Information System (INIS)

Bowman, J.D.; Kisslinger, L.S.; Silbar, R.R.

1981-03-01

This report contains the proceedings of the LAMPF Workshop on Nuclear and Particle Physics at Energies up to 31 GeV, New and Future Aspects, held in Los Alamos, January 5 to 8, 1981. Included are invited talks and contributed papers covering recent developments in (a) weak and unified interactions (including discussions of neutrino oscillations), (b) the hadronic description of strong interactions, (c) the quark description of strong interactions, (d) hypernuclei, and (e) new facilities and proposed experiments. One of the motivations for the Workshop was to explore physics justifications for a future high-intensity proton accelerator in this energy regime. Separate abstracts were prepared for papers from this meeting. Six papers were previously included in the data base

Computing in support of experiments at LAMPF

International Nuclear Information System (INIS)

Thomas, R.F.; Amann, J.F.; Butler, H.S.

1976-10-01

This report documents the discussions and conclusions of a study, conducted in August 1976, of the requirements for computer support of the experimental program in medium-energy physics at the Clinton P. Anderson Meson Physics Facility. 1 figure, 1 table

LOS ALAMOS: the future of medium energy physics

International Nuclear Information System (INIS)

Anon.

1979-01-01

A 'Workshop on Program Options in Intermediate Energy Physics' was recently held at LAMPF and the topics discussed there are summarized. The purpose of the meeting was to establish priorities for experimental research at intermediate energies. (W.D.L.).

Investigation of pion-nucleus interactions

International Nuclear Information System (INIS)

Moore, C.F.

1992-09-01

This report summarizes the work carried out by personnel from the University of Texas at Austin at the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF). The research activities involved experiments done with the Energetic Pion Channel and Spectrometer (EPICS), the Low Energy Pion Channel (LEP), the Pion and Particle Physics Channel (P 3 ), the High Resolution Spectrometer (HRS), and planning a new experimental program associated with the new high-resolution Neutral Meson Spectrometer (NMS) at LAMPF. A brief overview of work supported by this grant is given followed by an account of the study of the double giant resonances in pion double charge exchange on 51 V, 115 In, and 197 Au. This report contains a list of published papers and preprints, abstracts, and invited talks. These papers summarize experiments involving participants supported by this grant and indicate the work accomplished by these participants in this program of medium energy nuclear physics research. Lists of the most recent proposals on which we have participation at LAMPF, proposals which have been approved this past year to run as experiments, personnel who have participated in this research program are included. The research cited in this report is, in many cases, the collaborative effort of many groups associated with research at LAMPF

Beam intensity monitoring for the external proton beam at LAMPF

International Nuclear Information System (INIS)

Barrett, R.J.; Anderson, B.D.; Willard, H.B.; Anderson, A.N.; Jarmie, N.

1975-07-01

Three different intensity monitors were tested in the external proton beam at LAMPF, and together cover the entire range of beam currents available. A 800 kg Faraday cup was installed and used to measure the absolute intensity to better than 1 percent for beam currents up to several nanoamperes. A high gain ion chamber was used as part of the calibration procedure for the Faraday cup, and was found to be useful when monitoring very small beam intensities, being reliable down to the few picoampere level. A secondary emission monitor was also tested, calibrated, and found to be trustworthy only for beams of greater than 50 pA intensity. (auth)

LOS ALAMOS: Winds of change

Energy Technology Data Exchange (ETDEWEB)

Anon.

1984-03-15

The seventeenth annual Users' Group Meeting of the Los Alamos Meson Physics Facility (LAMPF) felt the winds of change. LAMPF Director Louis Rosen noted that recent progress at the 800 MeV proton linac should not hide the fact that these are difficult times. Extra funding for operations together with good luck in sustaining 800-900 μA beam for lengthy operating cycles have resulted in high utilization and effective running for difficult experiments such as neutrino scattering and the 'Crystal Box' measurement of rare muon decays. New impetus has been given to nuclear spectroscopy with the incorporation of a polarized target (partly from KEK) on the proton spectrometer, while the proton storage ring and beam areas will extend the LAMPF programme in 1985.

Nuclear physics accelerator facilities of the world

International Nuclear Information System (INIS)

1991-12-01

this report is intended to provide a convenient summary of the world's major nuclear physics accelerator facility with emphasis on those facilities supported by the US Department of Energy (DOE). Previous editions of this report have contained only DOE facilities. However, as the extent of global collaborations in nuclear physics grows, gathering summary information on the world's nuclear physics accelerator facilities in one place is useful. Therefore, the present report adds facilities operated by the National Science Foundation (NSF) as well as the leading foreign facilities, with emphasis on foreign facilities that have significant outside user programs. The principal motivation for building and operating these facilities is, of course, basic research in nuclear physics. The scientific objectives for this research were recently reviewed by the DOE/NSF Nuclear Science Advisory Committee, who developed a long range plan, Nuclei, Nucleons, and Quarks -- Nuclear Science in the 1990's. Their report begins as follows: The central thrust of nuclear science is the study of strongly interacting matter and of the forces that govern its structure and dynamics; this agenda ranges from large- scale collective nuclear behavior through the motions of individual nucleons and mesons, atomic nuclei, to the underlying distribution of quarks and gluons. It extends to conditions at the extremes of temperature and density which are of significance to astrophysics and cosmology and are conducive to the creation of new forms of strongly interacting matter; and another important focus is on the study of the electroweak force, which plays an important role in nuclear stability, and on precision tests of fundamental interactions. The present report provides brief descriptions of the accelerator facilities available for carrying out this agenda and their research programs

Antineutrino detector for anti ν oscillation studies at fission weapon tests and at LAMPF

International Nuclear Information System (INIS)

Kruse, H.W.; Loncoski, R.; Mack, J.

1980-01-01

Two anti ν oscillation experiments are planned, incorporating large volume (4200 l) liquid scintillation detectors 1) at large distances (450 to 800 m) from fission weapon tests and 2) at 12 to 50 m from LAMPF beam dump where significant anti ν/sub e/ events are detected only if some oscillation operates, such as ν/sub μ/ → ν/sub e/. Design criteria, detector characteristics, and experimental considerations are given

Prototype high current, high duty factor negative hydrogen ion source for LAMPF

International Nuclear Information System (INIS)

Lawrence, G.P.; Hayward, T.D.; Jackson, J.A.

1975-01-01

Present plans for the high current proton storage ring at LAMPF incorporate charge changing (stripping) injection of H - ions in all modes of operation. Achievable stored current levels in this device will be strongly dependent on the maximum H - beam intensity which can be accelerated by the linac, consistent with acceptable beam spill. This requirement has stimulated a program to develop an H - ion source capable of providing a suitably high peak current (up to 25 mA) at high duty factor (up to 12 percent), with a normalized x,x' or y,y' emittance acceptable to the accelerating system. There are presently two main approaches which could lead to H - ion sources providing this kind of performance. These are (a) the charge exchange method, in which an intense proton beam is fractionally converted to H - beam in a suitable charge adding medium, and (b) the direct extraction method, in which H - ions are obtained by a surface emission process associated with a gas discharge plasma. While both approaches may eventually find optimum application in different situations, it is not obvious, at present, which scheme will turn out to be the most satisfactory for LAMPF. A prototype charge exchange H - ion source has been constructed as a first step in the development program and is presently being evaluated. Work on surface emission direct extraction techniques is in the planning stages. (U.S.)

Physics Detector Simulation Facility (PDSF) architecture/utilization

International Nuclear Information System (INIS)

Scipioni, B.

1993-05-01

The current systems architecture for the SSCL's Physics Detector Simulation Facility (PDSF) is presented. Systems analysis data is presented and discussed. In particular, these data disclose the effectiveness of utilization of the facility for meeting the needs of physics computing, especially as concerns parallel architecture and processing. Detailed design plans for the highly networked, symmetric, parallel, UNIX workstation-based facility are given and discussed in light of the design philosophy. Included are network, CPU, disk, router, concentrator, tape, user and job capacities and throughput

[A high sensitivity search for mu gamma: The mega experiment at LAMPF

International Nuclear Information System (INIS)

1990-01-01

During the past 12 month period the Valparaiso University group has been active on LAMPF experiment 969, known as the MEGA experiment. This experiment is a search for the decay μ -> e γ, a decay which would violate lepton number conservation and which is strictly forbidden by the standard model for electroweak interactions. Previous searches for this decay mode have set limit the present day limit of 4.9 x 10 -11 . The MEGA experiment is designed to test the standard model predictions to one part in 10 +13

What makes a control system usable? An operational viewpoint

International Nuclear Information System (INIS)

Clay, M.

1990-01-01

This report discusses the generally accepted successes and shortcomings of the various computer and hardware-based control systems at the Los Alamos Meson Physics Facility (LAMPF) from an operator's standpoint. LAMPF currently utilizes three separate control rooms that, although critically co-dependent, use distinct operating methods. The first, the Injector Control Room, which is responsible for the operation of the three ion sources, the 750 keV transport lines and the 201.25 MHz portion of the linac, uses a predominantly hardware-based control system. The second, the LANSCE Control Room, which is responsible for the operation of the Los Alamos Neutron Scattering Center, uses a graphical touch-panel interface with single-application screens as its control system. The third, the LAMPF Central Control Room, which is responsible for the overall operation of LAMPF, primarily uses a text-oriented keyboard interface with multiple applications per screen. Though each system provides generally reliable human interfacing to the enormously complex and diverse machine known as LAMPF, the operational requirements of speed, usability, and reliability are increasingly necessitating the use of a standard control system that incorporates the positive aspects of all three control systems. (orig.)

Hypernuclear physics with a neutral meson spectrometer

International Nuclear Information System (INIS)

Peng, J.C.

1993-01-01

The (K - , π degrees) reaction, which complements the (K - , π - ) and the (π + , K + ) reactions, offers another means to study hypernuclear physics. The physics motivation for measuring the (K - , π degrees) reaction is discussed. The feasibility for detecting π degrees using the LAMPF Neutral Meson Spectrometer is studied with Monte-Carlo simulations. We conclude that the (K - , π degrees) reaction can be well measured at existing kaon beam lines

Particle physics experiments 1988

International Nuclear Information System (INIS)

Bairstow, R.

1989-01-01

This report describes work carried out in 1988 on experiments approved by the Particle Physics Experiments Selection Panel. The contents consist of unedited contributions from each experiment. More than forty projects at different accelerators (SPS, ISIS, PETRA, LAMPF, LEP, HERA, BNL, ILL, LEAR) are listed. Different organisations collaborate on different projects. A brief progress report is given. References to published articles are given. (author)

Overview of spin physics

International Nuclear Information System (INIS)

Yokosawa, A.

1992-01-01

Spin physics activities at medium and high energies became significantly active when polarized targets and polarized beams became accessible for hadron-hadron scattering experiments. My overview of spin physics will be inclined to the study of strong interaction using facilities at Argonne ZGS, Brookhaven AGS (including RHIC), CERN, Fermilab, LAMPF, an SATURNE. In 1960 accelerator physicists had already been convinced that the ZGS could be unique in accelerating a polarized beam; polarized beams were being accelerated through linear accelerators elsewhere at that time. However, there was much concern about going ahead with the construction of a polarized beam because (i) the source intensity was not high enough to accelerate in the accelerator, (ii) the use of the accelerator would be limited to only polarized-beam physics, that is, proton-proton interaction, and (iii) p-p elastic scattering was not the most popular topic in high-energy physics. In fact, within spin physics, π-nucleon physics looked attractive, since the determination of spin and parity of possible πp resonances attracted much attention. To proceed we needed more data beside total cross sections and elastic differential cross sections; measurements of polarization and other parameters were urgently needed. Polarization measurements had traditionally been performed by analyzing the spin of recoil protons. The drawbacks of this technique are: (i) it involves double scattering, resulting in poor accuracy of the data, and (ii) a carbon analyzer can only be used for a limited region of energy

The WNR facility - a pulsed spallation neutron source at the Los Alamos Scientific Laboratory

International Nuclear Information System (INIS)

Russell, G.J.; Lisowski, P.W.; King, N.S.P.

1978-01-01

The Weapons Neutron Research facility (WNR) at the Los Alamos Scientific Laboratory is the first operating example of a new class of pulsed neutron sources using the X(p,n)Y spallation reaction. At present, up to 10 microamperes of 800-MeV protons from the Clinton P. Anderson Meson Physics Facility (LAMPF) linear accelerator bombard a Ta target to produce an intense white-neutron spectrum from about 800 MeV to 100 keV. The Ta target can be coupled with CH 2 and H 2 O moderators to produce neutrons of lower energy. The time structure of the WNR proton beam may be varied to optimize neutron time-of-flight (TOF) measurements covering the energy range from several hundred MeV to a few meV. The neutronics of the WNR target and target/moderator configurations have been calculated from 800 MeV to 0.5 eV. About 11 neutrons per proton are predicted for the existing Ta target. Some initial neutron TOF data are presented and compared with calculations

Neutron-proton bremsstrahlung studies using the white neutron source at the LAMPF/WNR

International Nuclear Information System (INIS)

Wender, S.A.; Nelson, R.O.; Schillaci, M.E.; Blann, M.

1990-01-01

Nucleon-nucleon bremsstrahlung is a few-body radiative process that provides insight into several areas of nuclear physics. It is one of the simplest systems for studying the off-shell behavior of the nucleon-nucleon potential. The physics involved in neutron-proton bremsstrahlung (NPB) is significantly different from that of proton-proton bremsstrahlung (PPB). In particular, NPB cross sections are much larger than PPB cross sections because NPB allows E1 radiation, and the contribution to the cross section from the meson exchange currents has been calculated to be as large as the contributions from external radiation. To date there have been essentially four NPB experiments. These measurements have covered only a small part of the available phase space. A major experimental problem in performing these measurements has been the lack of a suitable intense, high-energy neutron beam. We are planning a measurement of the NPB cross section using the white neutron source at the WNR target area at the LAMPF accelerator. We plant to implement the experiment in three phases. In this first state, we shall measure inclusive hard-photon production using a multi-element gamma-ray telescope that is insensitive to neutrons. In the second phase, we shall measure the bremsstrahlung gamma-rays in coincidence with recoil protons. In the last phase, we shall detect the scattered neutrons in coincidence with the recoil protons and gamma rays. 8 refs., 6 figs

Experiments on the nuclear interactions of pion and electrons. Final progress report

International Nuclear Information System (INIS)

Minehart, R.C.

1998-05-01

The work in this report is grouped into four categories. (1) The experiments in pion nucleus physics were primarily studies of pion absorption and scattering in light nuclei, carried out at the Los Alamos Meson Physics Facility (LAMPF). (2) The experiments on fundamental particle properties were carried out at LAMPF and at the Paul Scherrer Institute (PSI) in Switzerland, the pion-beta decay experiment is still under construction and will begin taking data in 1999. (3) The experiments in electro-nuclear physics were performed at the Stanford Linear Electron Accelerator (SLAC), at the Saclay Laboratory in France, at the LEGS facility at the Brookhaven National Laboratory, and at the Continuous Electron Beam Accelerator Facility (CEBAF) at the Jefferson Laboratory. These experiments relate mainly to the question of the role of longitudinal and transverse strength for inelastic scattering from nuclei, measurements of fundamental nuclear properties with tagged polarized photons, and to the quark structure of the nucleon and its excited states. (4) Experiments on absorption of antiprotons in heavy nuclei, were carried out by K. Ziock primarily while on a sabbatical leave in Munich, Germany

Study of physical resistance of the disposal facility for accidental artificial event in LLW disposal facility

International Nuclear Information System (INIS)

Ogawa, Suihei; Irie, Masaaki; Uchida, Masahiro

2013-11-01

This report refer to results of examine what follows for structural stability evaluation for the LLW disposal facility in depth over general human activity in underground. Study of physically resistance on the facility for accidental artificial event, namely tunneling an operation facing the disposal facility in future. Physically resistance to excavation of tunneling etc. in disposal facility is studied based on supposing of Tunnel Boring Machine as an excavator, paying attention to reinforcement bar in concrete and steel plate of waste package, as feature of strength in these material differs from rock strength. And it is examined not only resistibility on excavation but also about hard situations of excavation in tunneling works, and namely give thorough consideration to critical quantity of cutting to reinforcement bar and steel plate that could keep resistibility on excavation based on tunneling velocity and limits time furthermore. It requests necessity of evaluation in consider with metal corrosion that status alteration on disposal facility is considered with on timescale. Period of keep on the physically resistance is estimated by velocity of metal corrosion consequently. The physically resistance is kept until metal corrosion reach remaining its material, giving a limits of the physically resistance on inside of facility. Main point of physically resistance in the report will be made the good use of a practice to physically resistance evaluation of in safety assessment. (author)

Proceedings of the LAMPF workshop on photon and neutral meson physics at intermediate energies

International Nuclear Information System (INIS)

Baer, H.W.; Crannell, H.; Peterson, R.J.

1987-12-01

This volume contains the Proceedings of the Workshop on ''Photon and Neutral-Meson, Physics at Intermediate Energies,'' held at Los Alamos, New Mexico, January 7 to 9, 1987. The purpose of this workshop was to bring together scientists working in the areas of electromagnetic, heavy-ion, and light hadron physics to discuss both the physics that could be addressed and potential capabilities of new, large intermediate-energy photon detectors. Based on the papers contained in these proceedings, it appears clear that there are a number of important areas that could be addressed with a much higher resolution neutral meson detector. It is also clear that the technical capability for building a neutral meson detector for energies up to 4 GeV with solid angle of approximately 10 mrs and resolution of a few hundred keV now exists. It also appears entirely reasonable to construct such a detector to be easily transportable so that it would become a national facility, available for use at a number of different laboratories. From the many interesting papers presented and from the broad representation of physicists from laboratories in Asia, Canada, Europe, Japan, and the United States, there appears to be a strong case for proceeding with the construction of such a detector

Physical security technologies for weapons complex reconfiguration facilities

International Nuclear Information System (INIS)

Jaeger, C.D.

1994-01-01

Sandia National Laboratories was a member of the Weapons Complex Reconfiguration (WCR) Safeguards and Security (S ampersand S) team providing assistance to the Department of Energy's (DOE) Office of Weapons Complex Reconfiguration. The physical security systems in the new and upgraded facilities being considered for the WCR had to meet DOE orders and other requirements set forth in the WCR Programmatic Design Criteria (PDC), incorporate the latest physical security technologies using proven state-of-the-art systems and meet fundamental security principles. The outcome was to avoid costly retrofits and provide effective and comprehensive protection against current and projected threats with minimal impact on operations, costs and schedule. Physical security requirements for WCR facilities include: (1) reducing S ampersand S life-cycle costs, (2) where feasible automating S ampersand S functions to minimize operational costs, access to critical assets and exposure of people to hazardous environments, (3) increasing the amount of delay to outsider adversary attack, (4) compartmentalizing the facility to minimize the number of personnel requiring access to critical areas and (5) having reliable and maintainable systems. To be most effective against threats physical security must be integrated with facility operations, safety and other S ampersand S activities, such as material control and accountability, nuclear measurements and computer and information security. This paper will discuss the S ampersand S issues, requirements, technology opportunities and needs. Physical security technologies and systems considered in the design effort of the Weapons Complex Reconfiguration facilities will be reviewed

Modeling of external radiation from the transport of radionuclides across a canyon

International Nuclear Information System (INIS)

Bowen, B.M.; Olsen, W.A.; Van Etten, D.; Chen, I-li.

1986-01-01

The Los Alamos Meson Physics Facility (LAMPF) is an 800-million electron volt, l mA intensity linear proton accelerator used for studying subatomic particles at relativistic velocities. Routine operation of the accelerator results in the formation of short-lived air activation products, primarily in the beam stop section of LAMPF. This study presents the results of monitoring and modeling external radiation levels from LAMPF emissions at three locations during 1984. Measured radiation exposures are presented for all three locations during a 49-day period. Hourly radiation levels are calculated for all sites and compared with the prevalent wind patterns during the study period. Predicted daily levels are compared with measured values at all of the sites. Accuracy of the model is compared for day and night conditions. Annual model predictions are also compared with TLD measurements

Current experiments in elementary particle physics

Energy Technology Data Exchange (ETDEWEB)

Wohl, C.G.; Armstrong, F.E., Oyanagi, Y.; Dodder, D.C.; Ryabov, Yu.G.; Frosch, R.; Olin, A.; Lehar, F.; Moskalev, A.N.; Barkov, B.P.

1987-03-01

This report contains summaries of 720 recent and current experiments in elementary particle physics (experiments that finished taking data before 1980 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Moscow Institute of Theoretical and Experimental Physics, Tokyo Institute of Nuclear Studies, KEK, LAMPF, Leningrad Nuclear Physics Institute, Saclay, Serpukhov, SIN, SLAC, and TRIUMF, and also experiments on proton decay. Instructions are given for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized.

Current experiments in elementary particle physics

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Oyanagi, Y.; Dodder, D.C.; Ryabov, Yu.G.; Frosch, R.; Olin, A.; Lehar, F.; Moskalev, A.N.; Barkov, B.P.

1987-03-01

This report contains summaries of 720 recent and current experiments in elementary particle physics (experiments that finished taking data before 1980 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Moscow Institute of Theoretical and Experimental Physics, Tokyo Institute of Nuclear Studies, KEK, LAMPF, Leningrad Nuclear Physics Institute, Saclay, Serpukhov, SIN, SLAC, and TRIUMF, and also experiments on proton decay. Instructions are given for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized

Perceptions of Important Characteristics of Physical Activity Facilities: Implications for Engagement in Walking, Moderate and Vigorous Physical Activity.

Science.gov (United States)

Heinrich, Katie M; Haddock, Christopher K; Jitnarin, Natinee; Hughey, Joseph; Berkel, LaVerne A; Poston, Walker S C

2017-01-01

Although few United States adults meet physical activity recommendations, those that do are more likely to access to physical activity facilities. Additionally, vigorous exercisers may be more likely to utilize a nearby physical activity facility, while light-to-moderate exercisers are less likely to do so. However, it is unclear what characteristics of those facilities are most important as well as how those characteristics are related to activity intensity. This study examined relationships between self-reported leisure-time physical activities and the use of and perceived characteristics of physical activity facilities. Data were from a cross-sectional study in a major metropolitan area. Participants ( N  = 582; ages 18-74, mean age = 45 ± 14.7 years) were more likely to be female (69.9%), Caucasian (65.6%), married (51.7%), and have some college education (72.8%). Household surveys queried leisure-time physical activity, regular physical activity facility use, and importance ratings for key facility characteristics. Leisure-time physical activity recommendations were met by 41.0% of participants and 50.9% regularly used a physical activity facility. Regular facility use was positively associated with meeting walking ( p  = 0.036), moderate ( p  importance on facility quality ( p  = 0.022), variety of physical activity options offered ( p  = 0.003), and availability of special equipment and resources ( p  = 0.01). The facility characteristics of low or free cost ( p  = 0.02) and offering childcare ( p  = 0.028) were barriers for walking, and being where friends and family like to go were barriers for moderate leisure-time physical activity ( p  = 0.013). Findings offer insights for structuring interventions using the social ecological model as well as for improving existing physical activity facilities.

Confinement Physics Research Facility/ZTH: A progress report

International Nuclear Information System (INIS)

Hammer, C.F.; Thullen, P.

1989-01-01

In October 1985 the Los Alamos National Laboratory's Controlled Thermonuclear Research (CTR) Division began the design and construction of the Confinement Physics Research Facility (CPRF) and the ZTH toroidal, reversed-field-pinch (RFP), plasma physics experiment. The CPRF is a facility which will provide the buildings, utilities, pulsed power system, control system and diagnostics needed to operate a magnetically confined fusion experiment, and ZTH will be the first experiment operated in the facility. The construction of CPRF/ZTH is scheduled for completion in the first quarter of 1993. 5 figs

Secondary beam line phase space measurement and modeling at LAMPF

International Nuclear Information System (INIS)

Floyd, R.; Harrison, J.; Macek, R.; Sanders, G.

1979-01-01

Hardware and software have been developed for precision on-line measurement and fitting of secondary beam line phase space parameters. A system consisting of three MWPC planes for measuring particle trajectories, in coincidence with a time-of-flight telescope and a range telescope for particle identification, has been interfaced to a computer. Software has been developed for on-line track reconstruction, application of experimental cuts, and fitting of two-dimensional phase space ellipses for each particle species. The measured distributions have been found to agree well with the predictions of the Monte Carlo program DECAY TURTLE. The fitted phase space ellipses are a useful input to optimization routines, such as TRANSPORT, used to search for superior tunes. Application of this system to the LAMPF Stopped Muon Channel is described

Stereo: cylindrical drift chamber for muon decay experiments at LAMPF

International Nuclear Information System (INIS)

Bolton, R.D.; Carlini, R.D.; Cooper, M.D.; Frank, J.S.; Hart, V.E.; Matis, H.S.; Mischke, R.E.; Sandberg, V.D.; Sennhauser, U.

1983-01-01

A stereo, cylindrical drift chamber has been built for use in a search for rare decay modes of the muon at LAMPF. This chamber (part of the Crystal Box detector) has 728 cells on 8 concentric annuli at alternating angles of 10 0 to 16 0 from the chamber axis and with radii from 105 to 220 mm. The basic cell cross section is (9 x 10) mm 2 and the inter-layer spacing is 4.7 mm. Preliminary results show the single-wire efficiencies to be greater than 99%. Based on results obtained from prototype chambers, we hope to achieve 170-μm resolution (including multiple scattering) when TDC offsets and sense-wire locations found in a careful inspection of the endplates are added to the track-finding algorithm

Direct mass and lifetime measurements of neutron-rich nuclei up to A∼100 using the TOFI spectrometer at LAMPF

International Nuclear Information System (INIS)

Lind, V.G.

1993-01-01

This project was directed toward the study of neutron-rich nuclei using the experimental facilities at LAMPF, which is a part of LANL. The principal results of the investigation include the discovery of many new isotopes along with a measurement of their masses and in particular those nuclides in the Z = 7--19 and 14 --26 regions of the chart of the nuclides.Thirty-four new nuclides were detected and studied with their masses being measured with relatively high accuracy, and an additional twenty-six that were previously known and measured were remeasured to an improved accuracy. Besides providing new information about the mass surface in new and extended redons of the chart of the nuclides, this investigation enabled properties and previously unknown structure of some of the nuclei to be determined such as nuclear deformation among some of the nuclides. Also a study of the neutron pairing gaps and the proton pairing gaps among these nuclides was made. Other developments also achieved included instrument (TOFI) improvements and upgrades and theoretical investigations into the masses of the hadrons

Advanced physical protection systems for facilities and transportation

International Nuclear Information System (INIS)

Jones, O.E.

1976-01-01

Sandia Laboratories is developing advanced physical protection safeguards in order to improve the security of special nuclear materials, facilities, and transportation. Computer models are being used to assess the cost-effectiveness of alternative systems for protecting facilities against external attack which may include internal assistance, and against internal theft or sabotage. Physical protection elements such as admittance controls, portals and detectors, perimeter and interior intrusion alarms, fixed and remotely activated barriers, and secure communications are being evaluated, adapted, and where required, developed. New facilities safeguards concepts which involve ''control loops'' between physical protection and materials control elements are being evolved jointly between Sandia Laboratories and Los Alamos Scientific Laboratory. Special vehicles and digital communications equipment have been developed for the ERDA safe-secure transportation system. The current status and direction of these activities are surveyed

Advanced physical protection systems for facilities and transportation

International Nuclear Information System (INIS)

Jones, O.E.

1976-01-01

Sandia Laboratories is developing advanced physical protection safeguards in order to improve the security of special nuclear materials, facilities, and transportation. Computer models are being used to assess the cost-effectiveness of alternative systems for protecting facilities against external attack which may include internal assistance, and against internal theft or sabotage. Physical protection elements such as admittance controls, portals and detectors, perimeter and interior intrusion alarms, fixed and remotely-activated barriers, and secure communications are being evaluated, adapted, and where required, developed. New facilities safeguards concepts which involve (control loops) between physical protection and materials control elements are being evolved jointly between Sandia Laboratories and Los Alamos Scientific Laboratory. Special vehicles and digital communications equipment have been developed for the ERDA safe-secure transportation system. The current status and direction of these activities are surveyed

Physical protection nuclear facilities against sabotage

International Nuclear Information System (INIS)

Hagemann, A.

2001-01-01

Full text: INFCIRC 225 Rev. 4 has introduced the Design Basis Threat, DBT, as a key element of the states physical protection system. The DBT is a definition which determines the level of physical protection of nuclear material during use, storage, transport and of nuclear facilities. It the basis for physical protection concepts and for the design of measures the operator or licensee has to provide. By this means it is also a definition of the responsibility for the physical protection which the operator accepts with the license. The new chapter designated to the physical protection against sabotage which has resulted also in the amendment of the title in INFCIRC 225 demonstrates the grown international concern about the potential consequences of sabotage. More than the physical protection against unauthorized removal the physical protection against sabotage has interfaces with the nuclear safety field. The basis of protection against sabotage therefore is much more based on the facility design-the safety design of the facility. Using the DBT the competent authority is in the position to determine the level of protection against sabotage and the remaining risk which has to be accepted. This risk of course depends on the real threat which is not known in advance. The acceptance of the remaining risk depends on both the assessment of the threat, its credibility and the potential consequences. There has been no serious act of sabotage in the past nor an attempt of. Despite of this the Harnun attack of the Japanese underground and some other recent terrorist activities could have given reasons to reconsider what threat might be credible. The German physical protection system has been developed since the increasing terrorist activities in the 1970s. From the beginning the protection against sabotage played an important role in the German system of physical protection. The requirements for the physical protection against unauthorized removal and against sabotage were

Perceptions of Important Characteristics of Physical Activity Facilities: Implications for Engagement in Walking, Moderate and Vigorous Physical Activity

Directory of Open Access Journals (Sweden)

Katie M. Heinrich

2017-11-01

Full Text Available BackgroundAlthough few United States adults meet physical activity recommendations, those that do are more likely to access to physical activity facilities. Additionally, vigorous exercisers may be more likely to utilize a nearby physical activity facility, while light-to-moderate exercisers are less likely to do so. However, it is unclear what characteristics of those facilities are most important as well as how those characteristics are related to activity intensity.PurposeThis study examined relationships between self-reported leisure-time physical activities and the use of and perceived characteristics of physical activity facilities.MethodsData were from a cross-sectional study in a major metropolitan area. Participants (N = 582; ages 18–74, mean age = 45 ± 14.7 years were more likely to be female (69.9%, Caucasian (65.6%, married (51.7%, and have some college education (72.8%. Household surveys queried leisure-time physical activity, regular physical activity facility use, and importance ratings for key facility characteristics.ResultsLeisure-time physical activity recommendations were met by 41.0% of participants and 50.9% regularly used a physical activity facility. Regular facility use was positively associated with meeting walking (p = 0.036, moderate (p < 0.001, and vigorous (p < 0.001 recommendations. Vigorous exercisers were more likely to use a gym/fitness center (p = 0.006 and to place higher importance on facility quality (p = 0.022, variety of physical activity options offered (p = 0.003, and availability of special equipment and resources (p = 0.01. The facility characteristics of low or free cost (p = 0.02 and offering childcare (p = 0.028 were barriers for walking, and being where friends and family like to go were barriers for moderate leisure-time physical activity (p = 0.013.ConclusionFindings offer insights for structuring interventions using the social ecological

Track reconstruction of normal muon decays in the LAMPF TPC: one working scheme

International Nuclear Information System (INIS)

McKee, R.J.

1983-01-01

A working scheme for track reconstruction of normal muon decays in the LAMPF TPC is here outlined. Muon tracks stopping in the TPC and helical electron tracks from muon decay are both identified and fitted for complete event reconstruction. Because of certain geometrical characteristics of the TPC, novel techniques are deployed to find the tracks. Normal road tracing methods do not work reliably; they are replaced by, among other things, a random search technique that locates the helix's planar projection and a carefully worked-out method for correctly putting each coordinate on its proper turn in the helix

Beam tomography or ART in accelerator physics

International Nuclear Information System (INIS)

Fraser, J.S.

1978-11-01

Projections of charged particle beam current density have been used for many years as a measure of beam position and size. The conventional practice of obtaining only two projections, usually in the horizontal and vertical planes, puts a severe limit on the detail that can be recovered from the projections. A third projection provides sufficient improvement to justify the addition of a wire to the conventional wire scanner in certain cases. A group of programs using algebraic reconstruction techniques was written to reconstruct beam current density from beam projections obtained at three or more specific or arbitrary angles around the beam. A generalized program, which makes use of arbitrary 2 x 2 transfer matrices between projections, can be used to reconstruct transverse or longitudinal emittance from appropriate projections. Reconstruction examples of beam current density and transverse and longitudinal emittance using experimental data from the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator beam are given

Current experiments in elementary particle physics

International Nuclear Information System (INIS)

Galic, H.; Dodder, D.C.; Klyukhin, V.I.; Ryabov, Yu.G.; Illarionova, N.S.; Lehar, F.; Oyanagi, Y.; Frosch, R.

1992-06-01

This report contains summaries of 584 current and recent experiments in elementary particle physics. Experiments that finished taking data before 1986 are excluded. Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Tokyo Institute of Nuclear Studies, Moscow Institute of Theoretical and Experimental Physics, KEK, LAMPF, Novosibirsk, Paul Scherrer Institut (PSI), Saclay, Serpukhov, SLAC, SSCL, and TRIUMF, and also several underground and underwater experiments. Instructions are given for remote searching of the computer database (maintained under the SLAC/SPIRES system) that contains the summaries

Measurement of observables in the pion-nucleon system and investigation of charge symmetry in 3H and 3He

International Nuclear Information System (INIS)

Sadler, M.E.

1989-01-01

This report describes the pion scattering programs in which Abilene Christian University collaborated under this contract which ended May 14, 1988. The experiments were conducted at the Clinton P. Anderson Meson Physics Facility at Los Alamos (LAMPF). The experiments were performed in collaboration with UCLA, George Washington University, LAMPF Groups MP-4, MP-10 and MP-13, and Catholic University. The measurements included: (1) a complete set of observables in the pion-nucleon system in the momentum interval 400--700 MeV/c, (2) differential cross sections at low energy for pion-nucleon charge exchange, and (3) elastic and inelastic scattering of π ± on 3 H and 3 He

Physical security of cut-and-cover underground facilities

International Nuclear Information System (INIS)

Morse, W.D.

1998-01-01

To aid designers, generic physical security objectives and design concepts for cut-and-cover underground facilities are presented. Specific aspects addressing overburdens, entryways, security doors, facility services, emergency egress, security response force, and human elements are discussed

The Physical Protection of Nuclear Material and Nuclear Facilities

International Nuclear Information System (INIS)

1999-08-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers

The Physical Protection of Nuclear Material and Nuclear Facilities

International Nuclear Information System (INIS)

1999-06-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers [es

The Physical Protection of Nuclear Material and Nuclear Facilities

International Nuclear Information System (INIS)

1999-06-01

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers

Nuclear physics at multi-GeV hadron facilities

International Nuclear Information System (INIS)

Geesaman, D.F.

1993-01-01

The important contributions Multi-GeV hadron beam facilities can make to the field of Nuclear Physics have been recognized by the community for a decade. Such a facility has featured prominently in each NSAC planning exercise in this period. As Nuclear Physicists realize they must become more concerned with the quark structure of nuclei and the applications of Quantum Chromodynamics to many body systems, the need for experiments at such facilities has become more urgent. In this talk, I will present a personal view of some of the significant recent Nuclear Physics results with multi-GeV hadron facilities, the most important opportunities which can open up to us in the future, and demonstrate how our field must take advantage of these opportunities to progress. I will also report on the recent discussions in the community to make this possible

An advanced hadron facility: A combined kaon factory and cold-neutron source

International Nuclear Information System (INIS)

Thiessen, H.A.

1987-01-01

A design concept is presented for an advanced hadron facility consisting of a combined kaon factory and second generation spallation source. Our proposed facility consists of a 1.2 GeV superconducting H - linac to bring the LAMPF energy up to 2 GeV, a multi-ring 2 GeV compressor, a shared cold-neutron and stopped-pion neutrino source, a 60 GeV 25 μAmp 6 Hz proton synchrotron, and kaon and proton experimental areas. We discuss the considerations which led to this design concept. We summarize recent results of r and d work on components for rapid-cycling synchrotrons. Finally, we mention briefly a pion linac, which may be a good way to gain experience with superconducting cavities if advanced hadron facility funding is delayed

Current experiments in elementary particle physics. Revised

Energy Technology Data Exchange (ETDEWEB)

Galic, H. [Stanford Univ., CA (United States). Stanford Linear Accelerator Center; Wohl, C.G.; Armstrong, B. [Lawrence Berkeley Lab., CA (United States); Dodder, D.C. [Los Alamos National Lab., NM (United States); Klyukhin, V.I.; Ryabov, Yu.G. [Inst. for High Energy Physics, Serpukhov (Russian Federation); Illarionova, N.S. [Inst. of Theoretical and Experimental Physics, Moscow (Russian Federation); Lehar, F. [CEN Saclay, Gif-sur-Yvette (France); Oyanagi, Y. [Univ. of Tokyo (Japan). Faculty of Sciences; Olin, A. [TRIUMF, Vancouver, BC (Canada); Frosch, R. [Paul Scherrer Inst., Villigen (Switzerland)

1992-06-01

This report contains summaries of 584 current and recent experiments in elementary particle physics. Experiments that finished taking data before 1986 are excluded. Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Tokyo Institute of Nuclear Studies, Moscow Institute of Theoretical and Experimental Physics, KEK, LAMPF, Novosibirsk, Paul Scherrer Institut (PSI), Saclay, Serpukhov, SLAC, SSCL, and TRIUMF, and also several underground and underwater experiments. Instructions are given for remote searching of the computer database (maintained under the SLAC/SPIRES system) that contains the summaries.

Medium energy measurements of N-N parameters

International Nuclear Information System (INIS)

Ambrose, D.; Bachman, M.; Coffey, P.; Glass, G.; Jobst, B.; McNaughton, K.H.; Nguyen, C.; Riley, P.J.

1993-01-01

The authors report here progress made during the three year period January 1, 1990, to December 31, 1993, for the Department of Energy Three-Year Grant No. DE-FG05-88ER40446, third year. A major part of the work has been associated with nucleon-nucleon (N-N) research carried out at the Nucleon Physics Laboratory (NPL) at the Los Alamos Meson Physics Facility (LAMPF). During this period they also completed data acquisition and analyses of a TRIUMF experiment, but they have no further plans for experimental work at TRIUMF. Other research has been and will be continued to be carried out at BNL, and involves two rare kaon decay experiments, BNL E791, now completed, and a second generation rare kaon decay experiment, E871, which has just this summer completed an engineering test run. The authors are now also members of a proposed experiment, STAR, (Solenoidal Tracker at RHIC) to be carried out at the Relativistic Heavy Ion Collider facility, RHIC, at BNL. The past three years have been a time of rapid change in the focus of the experimental program. A LAMPF experiment, E1097, in which they spent a large amount of effort during the past three years, was terminated due to funding shortages after they had fabricated the detector, but before data acquisition, and consequently they increased their participation in the rare kaon experiment at BNL, E871. It now appears that there will be no LAMPF N-N program after 1993, so that the research efforts will concentrate on the BNL rare kaon decay measurement, E871, and on STAR. The authors expect that STAR, which requires the fabrication of a large colliding beam detector facility, will use an increasing amount of their research efforts during the next few years. In what follows they describe recent progress on the LAMPF and TRIUMF N-N measurements, on the BNL rare kaon decay work, and on the initial work with the STAR group

The relationship between sports facility accessibility and physical activity among Korean adults

Directory of Open Access Journals (Sweden)

Sang Ah Lee

2016-08-01

Full Text Available Abstract Background The benefits of physical activity on physical and mental health are well known. The accessibility of sports facilities is reported to have considerable association with the amount of physical activity a person participates in. Therefore, we investigated the association between subjectively assessed accessibility of sports facilities and physical activity among Korean adults. Methods We obtained data from the 2012 Community Health Survey. Physical activity was measured based on weekly metabolic equivalent task (MET hours according to the International Physical Activity Questionnaire (IPAQ. Sociodemographic, economic, and health variables were used as covariates in a logistic regression model. Results A total 201,723 participants were included in this study. Participants with easy access to sports facilities participated in physical activity more often than those without easy access (OR = 1.16, 95 % CI 1.13–1.20. More physical activity was generally observed if participants had a history of depression or if participants were among the white-collar or urban subgroups. Conclusion Our results showed that the accessibility of sports facilities is associated with physical activity. Therefore, it is crucial to consider the accessibility of sports facilities when promoting an environment conducive to physical activity or designing programs for enhancing physical activity.

In-situ cyclic stress experiment at the Clinton P. Anderson Meson Physics Facility (LAMPF) for determining the effect of dislocation vibration on void growth in metals during irradiation

International Nuclear Information System (INIS)

Green, W.V.; Sommer, W.F.; Coulter, C.A.

1979-01-01

Experience is reported with the first in-situ cyclic-stress irradiation at LAMPF. A proton beam ion current of 3 to 6 μA of 800 MeV protons was utilized for 24 days irradiation. Radiation damage effects of 800 MeV protons incident on a 1-cm thick Cu target were calculated using the nucleon-meson transport code to determine the nuclear reactions produced by the protons, the theory of Lindhard to evaluate the resultant damage energy deposited in the target. These calculations have been extended to Al. Damage effects were nearly uniform through a 1-cm target thickness, and the results obtained can be expressed in cross section form. The calculation yielded a damage energy cross section of about 63 barn-keV, a nuclear transmutation cross section of 0.44 barns, and indicated copious hydrogen, helium, and neutron production. Analysis of the effect of dislocation vibration on the efficiency of a dislocation line as a sink for point defects predicted that dislocation vibration should suppress void growth. The effect results from the fact that the dislocation will sweep up vacancies, which diffuse less rapidly than interstitials. The growth rate of voids in Al under simultaneous proton irradiation and cyclic stressing are compared to that of samples irradiated at the same time but without any stressing. The samples are placed one behind the other along the proton path so that identical irradiation histories can be achieved. The temperature of the samples is controlled, known and uniform. The initial preirradiation state is a prestrained state of a few hundred stress cycles. The samples are irradiated without stress through the incubation period for void nucleation before the cyclic stress is applied

Physics and detector simulation facility Type O workstation specifications

International Nuclear Information System (INIS)

Chartrand, G.; Cormell, L.R.; Hahn, R.; Jacobson, D.; Johnstad, H.; Leibold, P.; Marquez, M.; Ramsey, B.; Roberts, L.; Scipioni, B.; Yost, G.P.

1990-11-01

This document specifies the requirements for the front-end network of workstations of a distributed computing facility. This facility will be needed to perform the physics and detector simulations for the design of Superconducting Super Collider (SSC) detectors, and other computations in support of physics and detector needs. A detailed description of the computer simulation facility is given in the overall system specification document. This document provides revised subsystem specifications for the network of monitor-less Type 0 workstations. The requirements specified in this document supersede the requirements given. In Section 2 a brief functional description of the facility and its use are provided. The list of detailed specifications (vendor requirements) is given in Section 3 and the qualifying requirements (benchmarks) are described in Section 4

The ELI–NP facility for nuclear physics

International Nuclear Information System (INIS)

Ur, C.A.; Balabanski, D.; Cata-Danil, G.; Gales, S.; Morjan, I.; Tesileanu, O.; Ursescu, D.; Ursu, I.; Zamfir, N.V.

2015-01-01

Extreme Light Infrastructure–Nuclear Physics (ELI–NP) is aiming to use extreme electromagnetic fields for nuclear physics research. The facility, currently under construction at Magurele–Bucharest, will comprise a high power laser system and a very brilliant gamma beam system. The technology involved in the construction of both systems is at the limits of the present-day’s technological capabilities. The high power laser system will consist of two 10 PW lasers and it will produce intensities of up to 10 23 –10 24 W/cm 2 . The gamma beam, produced via Compton backscattering of a laser beam on a relativistic electron beam, will be characterized by a narrow bandwidth (<0.5%) and tunable energy of up to almost 20 MeV. The research program of the facility covers a broad range of key topics in frontier fundamental physics and new nuclear physics. A particular attention is given to the development of innovative applications. In the present paper an overview of the project status and the overall performance characteristics of the main research equipment will be given. The main fundamental physics and applied research topics proposed to be studied at ELI–NP will also be briefly reviewed

Current experiments in elementary particle physics. Revision 1-85

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Rittenberg, A.

1985-01-01

This report contains summaries of 551 approved experiments in elementary particle physics (experiments that finished taking data before 1 January 1980 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Moscow Institute of Theoretical and Experimental Physics, Tokyo Institute of Nuclear Studies, KEK, LAMPF, Leningrad Nuclear Physics Institute, Saclay, Serpukhov, SIN, SLAC, and TRIUMF, and also experiments on proton decay. Properties of the fixed-target beams at most of the laboratories are summarized. Instructions are given for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries

Summary of the Los Alamos Spallation Radiation Effects Facility at LAMPF (LASREF)

International Nuclear Information System (INIS)

Sommer, W.

1989-01-01

This paper describes the components and procedures in place at LASREF. It also lists the irradiation experiments performed. Active experiments, major results, and future plans are briefly described. The papers covering theoretical aspects, facility characterization/description and experiments at LASREF are listed

Technical progress report

International Nuclear Information System (INIS)

1982-01-01

This report summarizes the work carried out by personnel at the Nuclear Physics Laboratory of the University of Colorado from about August 1, 1981 to October 1, 1982, under contract with the Department of Energy. The intermediate energy studies summarized in this report were carried out at the meson physics facilities at Los Alamos (LAMPF), the cyclotron at Indiana University (IUCF), and the meson physics facilities at Vancouver (TRIUMF). This year, for the first time, intermediate energy experimental studies are being reported in separate documents from the low energy and theoretical nuclear physics efforts. Experimental studies are reported on pion-nucleus interactions, charge exchange reactions, nucleon transfer reactions, and apparatus development

LOS ALAMOS

International Nuclear Information System (INIS)

Anon.

1993-01-01

Following the historic observation of neutrinos in the mid-1950s by two Los Alamos scientists, Fred Reines and Clyde Cowan, Jr, using inverse beta decay, there has been a long and distinguished history of experimental neutrino physics at LAMPF, the Los Alamos Meson Physics Facility. LAMPF is the only meson factory to have had an experimental neutrino programme. In the late 1970s, the first LAMPF neutrino experiment used a 6-tonne water Cherenkov detector 7 metres from the beam stop. A collaboration of Yale, Los Alamos and several other institutions, this experiment searched for the forbidden decay of a muon into an electron and two neutrinos, and measured the reaction rate of a neutrino interacting with a deuteron to give two protons and an electron - the inverse of the reaction that drives the sun's primary energy source. The next LAMPF neutrino experiment, a UC Irvine/Maryland/Los Alamos collaboration, ran from 1982 through 1986 and measured the elastic scattering rate of electron neutrinos and protons, where both neutral and charged weak currents contribute. With its precision of about 15%, the experiment provided the first demonstration of (destructive) interference between the charged and neutral currents. More recent neutrino experiments at LAMPF have searched for neutrino oscillations, especially between muon- and electron-neutrinos. The newest experiment to pursue this physics (as well as oscillations in other channels) is LSND (July/ August, page 10 and cover). In addition to searching for these oscillations, LSND will measure neutrino-proton elastic scattering at low momentum transfer, providing a sensitive measure of the strange quark contribution to the proton spin. LSND began taking data in August. Los Alamos physicists have also been busy in neutrino physics experiments elsewhere. One such experiment looked at the beta decay of free molecular tritium to obtain an essentially model independent determination of the electron-neutrino mass. The

High intensity beam profile monitors for the LAMPF primary beam lines

International Nuclear Information System (INIS)

Hoffman, E.W.; Macek, R.J.; van Dyck, O.; Lee, D.; Harvey, A.; Bridge, J.; Cainet, J.

1979-01-01

Two types of beam profile monitors are in use at LAMPF to measure the properties of the 800 MeV, 500 μA proton beam external to the linac. Both types use secondary electron emission from a wire to produce a current signal proportional to the amount of proton beam that intercepts the wire. The wire scanner system uses a pair of orthogonal wires which are passed through the beam and the harp system uses two fixed planes of parallel wires. Most of the harps are not retractable and are exposed continuously to the primary beam. The high beam intensities available lead to a number of technical problems for instruments that intercept the beam or are close to primary beam targets. The thermal, electrical, radiation-damage, and material selection problems encountered, and some solutions which have been implemented are discussed

Measurement of observables in the pion-nucleon system and investigation of charge symmetry in 3H and 3He: Progress report, 1 March 1987-1 December 1987

International Nuclear Information System (INIS)

Sadler, M.E.; Isenhower, L.D.

1987-01-01

This report describes the progress made in the past year and future plans for the pion scattering programs in which Abilene Christian University is collaborating. The experiments are conducted at the Clinton P. Anderson Meson Physics Facility at Los Alamos (LAMPF). The experiments are performed in collaboration with UCLA, George Washington University, LAMPF Groups MP-4, MP-10 and MP-13, and Catholic University. The measurements include: (1) a complete set of observables in the pion-nucleon system in the momentum interval 400 to 700 MeV/c, (2) differential cross sections at low energy for pion-nucleon charge exchange, and (3) elastic and inelastic scattering of π/sup +-/ on 3 H and 3 He

The Manuel Lujan Jr. Neutron Scattering Center (LANSCE) experiment reports 1993 run cycle. Progress report

Energy Technology Data Exchange (ETDEWEB)

Farrer, R.; Longshore, A. [comps.

1995-06-01

This year the Manuel Lujan Jr. Neutron Scattering Center (LANSCE) ran an informal user program because the US Department of Energy planned to close LANSCE in FY1994. As a result, an advisory committee recommended that LANSCE scientists and their collaborators complete work in progress. At LANSCE, neutrons are produced by spallation when a pulsed, 800-MeV proton beam impinges on a tungsten target. The proton pulses are provided by the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator and a associated Proton Storage Ring (PSR), which can Iter the intensity, time structure, and repetition rate of the pulses. The LAMPF protons of Line D are shared between the LANSCE target and the Weapons Neutron Research (WNR) facility, which results in LANSCE spectrometers being available to external users for unclassified research about 80% of each annual LAMPF run cycle. Measurements of interest to the Los Alamos National Laboratory (LANL) may also be performed and may occupy up to an additional 20% of the available beam time. These experiments are reviewed by an internal program advisory committee. This year, a total of 127 proposals were submitted. The proposed experiments involved 229 scientists, 57 of whom visited LANSCE to participate in measurements. In addition, 3 (nuclear physics) participating research teams, comprising 44 scientists, carried out experiments at LANSCE. Instrument beam time was again oversubscribed, with 552 total days requested an 473 available for allocation.

The Manuel Lujan Jr. Neutron Scattering Center (LANSCE) experiment reports 1993 run cycle. Progress report

International Nuclear Information System (INIS)

Farrer, R.; Longshore, A.

1995-06-01

This year the Manuel Lujan Jr. Neutron Scattering Center (LANSCE) ran an informal user program because the US Department of Energy planned to close LANSCE in FY1994. As a result, an advisory committee recommended that LANSCE scientists and their collaborators complete work in progress. At LANSCE, neutrons are produced by spallation when a pulsed, 800-MeV proton beam impinges on a tungsten target. The proton pulses are provided by the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator and a associated Proton Storage Ring (PSR), which can Iter the intensity, time structure, and repetition rate of the pulses. The LAMPF protons of Line D are shared between the LANSCE target and the Weapons Neutron Research (WNR) facility, which results in LANSCE spectrometers being available to external users for unclassified research about 80% of each annual LAMPF run cycle. Measurements of interest to the Los Alamos National Laboratory (LANL) may also be performed and may occupy up to an additional 20% of the available beam time. These experiments are reviewed by an internal program advisory committee. This year, a total of 127 proposals were submitted. The proposed experiments involved 229 scientists, 57 of whom visited LANSCE to participate in measurements. In addition, 3 (nuclear physics) participating research teams, comprising 44 scientists, carried out experiments at LANSCE. Instrument beam time was again oversubscribed, with 552 total days requested an 473 available for allocation

Medium energy measurements of n-n parameters: Progress in research, January 1, 1986-December 31, 1986

International Nuclear Information System (INIS)

Riley, P.J.

1987-01-01

A major part of the work has been and will continue to be associated with research done at the Nucleon Physics Laboratory (NPL) at the Los Alamos Meson Physics Facility (LAMPF). The aim of the experimental program is the determination of the nucleon-nucleon amplitudes at medium energy. The required data include both elastic and inelastic experiments, and in addition the measurement of polarization and polarization transfer parameters. We have been emphasizing single pion production measurements using polarized proton beams, and expect that our present data base will provide stringent tests of theoretical models. With the development of the LAMPF high intensity polarized proton source, we expect that a reasonably intense beam of medium energy polarized neutrons will become available, and are planning a series of experiments utilizing polarized neutrons to determine the importance of the I = 0 reaction amplitudes at medium energies

Computerized health physics record system at a Canadian fabrication facility

International Nuclear Information System (INIS)

Thind, K.S.

1984-01-01

This poster session will describe the types of Health Physics data input into a Hewlett-Packard 3000 computer. The Health Physics data base at this facility includes the following: employee hours data, airborne uranium concentrations, external dosemetry (badge readings), internal dosemetry (bioassay) and environmental health physics (stack sample results) data. It will describe the types of outputs achievable in the form of various reports, such as: individual employee health physics report for a given period, a general health physics summary report for a given period, individual urinalysis report, local air concentration report and graphs. The use of this computerized health physics record system in the overall radiation protection program at this facility is discussed

Monitor update: 1979

International Nuclear Information System (INIS)

Grisham, D.L.; Ekberg, E.L.; Lambert, J.E.; Meyer, R.E.; Stroik, P.J.; Wickham, M.D.

1980-01-01

The Clinton P. Anderson Meson Physics Facility (LAMPF) has developed an advanced remote-handling system (Monitor) that is routinely used to perform complex tasks required to maintain, replace, and improve highly radioactive experimental facilities and components. This advanced system is based on the use of first-generation, force-reflecting servomanipulators that are placed at the remote-task site by a commercial hydraulic crane. A number of television cameras provide the viewing for the operations. Although LAMPF is now able to perform all the maintenance necessary on our main experimental beam line, advancements in manipulator dexterity and capacity, television viewing, and master-slave control links are required to develop the speed and dexterity necessary for general use. These developments should be undertaken as soon as possible to provide a means of routine handling of toxic and dangerous materials, as well as a capability to respond to disasters

Hadron physics

International Nuclear Information System (INIS)

Bunce, G.

1984-01-01

Is all hadronic physics ultimately describable by QCD. Certainly, many disparate phenomena can be understood within the QCD framework. Also certainly, there are important questions which are open, both theoretically (little guidance, as yet) and experimentally, regarding confinement. Are there dibaryons, baryonium, glueballs. In addition, there are experimental results which at present do not have an explanation. This talk, after a short section on QCD successes and difficulties, will emphasize two experimental topics which have recent results - glueball spectroscopy and exclusive reactions at large momentum transfer. Both are experimentally accessible in the AGS/LAMPF II/AGS II/TRIUMF II/SIN II energy domain

Future directions in controlling the LAMPF-PSR accelerator complex at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Stuewe, R.; Schaller, S.; Bjorklund, E.

1992-01-01

Four interrelated projects are underway whose purpose is to migrate the LAMPF-PSR Accelerator Complex control systems to a system with a common set of hardware and software components. Project goals address problems in performance, maintenance and growth potential. Front-end hardware, operator interface hardware and software, computer systems, network systems and data system software are being simultaneously upgraded as part of these efforts. The efforts are being coordinated to provide for a smooth and timely migration to a client-server model-based data acquisition and control system. An increased use of distributed intelligence at both the front-end and the operator interface is a key element of the projects. (author)

The current status and possible future of the Los Alamos spallation radiation effects facility

Energy Technology Data Exchange (ETDEWEB)

Borden, M.J.; Sommer, W.F. [Los Alamos National Laboratory, NM (United States)

1995-10-01

The Los Alamos Spallation Radiation Effects Facility (LASREF) has been configured for both proton and spallation neutron irradiations since 1985. The facility makes use of the Los Alamos Meson Physics Facility 1 mA 800 MeV proton beam. Environment controlled proton and neutron irradiations have been demonstrated over the past nine years. The current copper beam stop configuration produces a maximum measured neutron flux of 4.6 x 10{sup 17} m{sup {minus}2}s{sup {minus}1} for energies greater than 1 KeV. The maximum proton flux at the center of Gaussian shaped beam is 1.2 x 10{sup 14} protons cm{sup {minus}2}s{sup {minus}1} with beam spot diameter of 3.5 cm at 2{sigma}. Previously published work has shown that the neutron flux can be increased by a factor of ten by changing the beam stop to tungsten and decreasing the diameter. Expertise exists at Los Alamos to further optimize this design to tailor neutron production and spectrum. Consideration and preliminary planning has also been done for increasing the LAMPF proton current from 1 mA to a few mA with a possible maximum of 10 mA. An upgrade of this type would produce current densities comparable to those proposed for the Accelerator-Driven Transmutation Technologies (ADTT) programs.

Current experiments in elementary particle physics

Energy Technology Data Exchange (ETDEWEB)

Wohl, C.G.; Armstrong, F.E.; Trippe, T.G.; Yost, G.P. (Lawrence Berkeley Lab., CA (USA)); Oyanagi, Y. (Tsukuba Univ., Ibaraki (Japan)); Dodder, D.C. (Los Alamos National Lab., NM (USA)); Ryabov, Yu.G.; Slabospitsky, S.R. (Gosudarstvennyj Komitet po Ispol' zovaniyu Atomnoj Ehnergii SSSR, Serpukhov (USSR). Inst. Fiziki Vysokikh Ehnergij); Frosch, R. (Swiss Inst. for Nuclear Research, Villigen (Switzerla

1989-09-01

This report contains summaries of 736 current and recent experiments in elementary particle physics (experiments that finished taking data before 1982 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Tokyo Institute of Nuclear Studies, Moscow Institute of Theoretical and Experimental Physics, Joint Institute for Nuclear Research (Dubna), KEK, LAMPF, Novosibirsk, PSI/SIN, Saclay, Serpukhov, SLAC, and TRIUMF, and also several underground experiments. Also given are instructions for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized.

Current experiments in elementary particle physics

International Nuclear Information System (INIS)

Wohl, C.G.; Armstrong, F.E.; Trippe, T.G.; Yost, G.P.; Oyanagi, Y.; Dodder, D.C.; Ryabov, Yu.G.; Slabospitsky, S.R.; Olin, A.; Klumov, I.A.

1989-09-01

This report contains summaries of 736 current and recent experiments in elementary particle physics (experiments that finished taking data before 1982 are excluded). Included are experiments at Brookhaven, CERN, CESR, DESY, Fermilab, Tokyo Institute of Nuclear Studies, Moscow Institute of Theoretical and Experimental Physics, Joint Institute for Nuclear Research (Dubna), KEK, LAMPF, Novosibirsk, PSI/SIN, Saclay, Serpukhov, SLAC, and TRIUMF, and also several underground experiments. Also given are instructions for searching online the computer database (maintained under the SLAC/SPIRES system) that contains the summaries. Properties of the fixed-target beams at most of the laboratories are summarized

Medium energy measurements of n-n parameters. Progress report, January 1-December 31, 1985

International Nuclear Information System (INIS)

1986-01-01

This document constitutes a progress report (1985-86) for the ongoing medium energy nuclear physics research program. A major part of the work has been and will continue to be associated with research done at the Nucleon Physics Laboratory (NPL) at the Los Alamos Meson Physics Facility (LAMPF). The aim of the experimental program is the determination of the nucleon-nucleon amplitudes at medium energy. The required data include both elastic and inelastic experiments, and in addition the measurement of polarization and polarization transfer parameters. We have been emphasizing single pion production measurements using polarized proton beams, and expect that our present data base will provide stringent tests of theoretical models. With the development of the LAMPF high intensity polarized proton source, we expect that a reasonably intense beam of medium energy polarized neutrons will become available, and are planning a series of experiments utilizing polarized neutrons to determine the importance of the I = 0 reaction amplitudes at medium energies

HUGS at CEBAF [Hampton University Graduate Studies at the Continuous Electron Beam Accelerator Facility] June 6--24, 1988

International Nuclear Information System (INIS)

1988-01-01

Topics discussed in this paper are: Physics thru the last 80 years; low energy neutron physics at LAMPF; experiments on P-violation; nucleon structure structure and nucleon resonances; electro-excitation of nucleon resonances; electron scattering (e,e'p) experiments; quasielastic scattering of electron with nucleus (introduction to (e,e'P) experiment); CEBAF's machine; quantum hadrodynamics-QHD-1 the Walecka model; relativistic nuclear dynamics; hybrid models and QCD; and modeling confinement: poor man's version

Transport of radionuclides from the LAMPF lagoons

International Nuclear Information System (INIS)

Ferenbaugh, R.W.; Purtymun, W.D.

1985-01-01

Monitoring of the discharge water from the Los Alamos Meson Physics Facility lagoons continued during June and December of 1983. The list of radionuclides being monitoring includes 7 Be, 57 Co, 134 Cs, 3 H, 54 Mn, 22 Na, and 83 Rb. The sampling locations and the data obtained to date are presented. Movement of radionuclides around the lagoons has been described in a previous report. 1 reference, 1 table

Analytic evaluation of LAMPF II Booster Cavity design

International Nuclear Information System (INIS)

Friedrichs, C.C.

1985-01-01

Through the past few decades, a great deal of sophistication has evolved in the numeric codes used to evaluate electromagnetically resonant structures. The numeric methods are extremely precise, even for complicated geometries, whereas analytic methods require a simple uniform geometry and a simple, known mode configuration if the same precision is to be obtained. The code SUPERFISH, which is near the present state-of-the-art of numeric methods, does have the following limitations: No circumferential geometry variations are permissible; there are no provisions for magnetic or dielectric losses; and finally, it is impractical (because of the complexity of the code) to modify it to extract particular bits of data one might want that are not provided by the code as written. This paper describes how SUPERFISH was used as an aid in derivating an analytic model of the LAMPF II Booster Cavity. Once a satisfactory model was derived, simple FORTRAN codes were generated to provide whatever data was required. The analytic model is made up of TEM- and radial-mode transmission-line sections, as well as lumped elements where appropriate. Radial transmission-line equations, which include losses, were not found in any literature, and the extension of the lossless equations to include magnetic and dielectric losses are included in this paper

International physical protection self-assessment tool for chemical facilities.

Energy Technology Data Exchange (ETDEWEB)

Tewell, Craig R.; Burdick, Brent A.; Stiles, Linda L.; Lindgren, Eric Richard

2010-09-01

This report is the final report for Laboratory Directed Research and Development (LDRD) Project No.130746, International Physical Protection Self-Assessment Tool for Chemical Facilities. The goal of the project was to develop an exportable, low-cost, computer-based risk assessment tool for small to medium size chemical facilities. The tool would assist facilities in improving their physical protection posture, while protecting their proprietary information. In FY2009, the project team proposed a comprehensive evaluation of safety and security regulations in the target geographical area, Southeast Asia. This approach was later modified and the team worked instead on developing a methodology for identifying potential targets at chemical facilities. Milestones proposed for FY2010 included characterizing the international/regional regulatory framework, finalizing the target identification and consequence analysis methodology, and developing, reviewing, and piloting the software tool. The project team accomplished the initial goal of developing potential target categories for chemical facilities; however, the additional milestones proposed for FY2010 were not pursued and the LDRD funding therefore was redirected.

Dusty Plasma Physics Facility for the International Space Station

Science.gov (United States)

Goree, John; Hahn, Inseob

2015-09-01

The Dusty Plasma Physics Facility (DPPF) is an instrument planned for the International Space Station (ISS). If approved by NASA, JPL will build and operate the facility, and NASA will issue calls for proposals allowing investigators outside JPL to carry out research, public education, and outreach. Microgravity conditions on the ISS will be useful for eliminating two unwanted effects of gravity: sedimentation of dust particles to the bottom of a plasma chamber, and masking weak forces such as the ion drag force that act on dust particles. The DPPF facility is expected to support multiple scientific users. It will have a modular design, with a scientific locker, or insert, that can be exchanged without removing the entire facility. The first insert will use a parallel-plate radio-frequency discharge, polymer microspheres, and high-speed video cameras. This first insert will be designed for fundamental physics experiments. Possible future inserts could be designed for other purposes, such as engineering applications, and experimental simulations of astrophysical or geophysical conditions. The design of the facility will allow remote operation from ground-based laboratories, using telescience.

Physics Division annual review, 1 April 1985-31 March 1986

Energy Technology Data Exchange (ETDEWEB)

1986-09-01

The highlight of the Argonne Physics Division during the past year (1985/86) has been the completion and dedication of the final superconducting linac stages of the ATLAS system and the beginning of the research program that utilizes the full capabilities of that system. The transition to using the full ATLAS and the new experimental area has been a smooth one and the research program is beginning to bear fruit. The experimental facilities have also come into operation with three major components, consisting of the first stage of a gamma detection system incorporating an array of Compton-suppressed germanium detectors and BGO total energy detectors, a magnetic spectrograph of the Enge split-pole design, with a focal-plane detector system adapted to heavy ions, and a new scattering facility with a number of features. Interesting new data are emerging on quasi-elastic processes, on the transition between fission and quasi-fission and the study of nuclear structure at high spin. The past year has also seen the merging of the nuclear research in the Argonne Chemistry Division, mostly in heavy-ion and medium-energy nuclear physics, with the Physics Division. The merger is leading to full cooperation within the larger group and will help broaden and strengthen the total effort in nuclear physics. In medium-energy physics the year has seen the successful execution of an experiment at the SLAC NPAS station to study the delta resonance in nuclei. Progress is being made in the effort at Fermilab on deep inelastic muon scattering, on the development of a tensor polarized gas deuterium target for use with storage rings, and on the LAMPF neutrino oscillation experiment. In theoretical nuclear physics an effort is continuing on investigating the relevant degrees of freedom in the microscopic dynamics of nuclei and the importance of three-body forces. 51 figs., 2 tabs.

Physics Division annual review, 1 April 1985-31 March 1986

International Nuclear Information System (INIS)

1986-09-01

The highlight of the Argonne Physics Division during the past year (1985/86) has been the completion and dedication of the final superconducting linac stages of the ATLAS system and the beginning of the research program that utilizes the full capabilities of that system. The transition to using the full ATLAS and the new experimental area has been a smooth one and the research program is beginning to bear fruit. The experimental facilities have also come into operation with three major components, consisting of the first stage of a gamma detection system incorporating an array of Compton-suppressed germanium detectors and BGO total energy detectors, a magnetic spectrograph of the Enge split-pole design, with a focal-plane detector system adapted to heavy ions, and a new scattering facility with a number of features. Interesting new data are emerging on quasi-elastic processes, on the transition between fission and quasi-fission and the study of nuclear structure at high spin. The past year has also seen the merging of the nuclear research in the Argonne Chemistry Division, mostly in heavy-ion and medium-energy nuclear physics, with the Physics Division. The merger is leading to full cooperation within the larger group and will help broaden and strengthen the total effort in nuclear physics. In medium-energy physics the year has seen the successful execution of an experiment at the SLAC NPAS station to study the delta resonance in nuclei. Progress is being made in the effort at Fermilab on deep inelastic muon scattering, on the development of a tensor polarized gas deuterium target for use with storage rings, and on the LAMPF neutrino oscillation experiment. In theoretical nuclear physics an effort is continuing on investigating the relevant degrees of freedom in the microscopic dynamics of nuclei and the importance of three-body forces. 51 figs., 2 tabs

Low-energy antiprotons physics and the FLAIR facility

International Nuclear Information System (INIS)

Widmann, E

2015-01-01

FLAIR, the Facility for low-energy antiproton and ion research has been proposed in 2004 as an extension of the planned FAIR facility at Darmstadt, Germany. FLAIR was not included into the modularized start version of FAIR, but the recent installation of the CRYRING storage ring at GSI Darmstadt has opened new perspectives for physics with low-energy antiprotons at FAIR. (paper)

Remote operations and viewing using the monitor system

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.; Baldwin, T.S.; Ekberg, E.L.; Hernandez, T.R.; Raybun, J.L.

1984-01-01

Over the past two years, major rebuilding operations were conducted at the Clinton P. Anderson Meson Physics Facility (LAMPF). These operations involved replacement of complex experimental apparatus in high-radiation areas using servomanipulators and video viewing. All remote tasks were completed on or ahead of allotted schedules. This success is attributed to continuing improvement of manipulators, viewing systems, and operating techniques

Accelerator facilities and development of physics in Kazakhstan (1992-2002)

International Nuclear Information System (INIS)

Shkol'nik, V.S.; Arzumanov, A.A.; Borisenko, A.N.; Gorlachev, I.D.; Kadyrzhanov, K.K.; Kuterbekov, K.A.; Lysukhin, S.N.; Tuleushev, A.Zh.

2003-01-01

The monograph is devoted to the use both the isochronous cyclotron U-150M and the accelerator of the heavy ions UKP-2-1, which are the base facilitates of the Institute of Nuclear Physics of the National Nuclear Center of the Republic of Kazakhstan (INP NNC RK) for scientific researches in the field of nuclear physics of low and middle energies, radiation solid state physics and applied nuclear physics. The history of creation of facilities, some archival documents are given The use of the accelerators of INP NNC RK for the last ten years (1992-2002) is described in detail. The parameters of facilities, photos of the main functional units of the accelerators as well as nuclear and physical methods realized on these basic facilities have been presented. The appendixes present copies of some important historical documents as well as the following materials: a list of on accelerator themes, a list of dissertation works, a list of publications of the Nuclear Physics Department within the period of 1972-2002 and the Solid State Department within the period of 1995-2002 carried out using the accelerators of INP NNC RK. The book is intended for scientists studying actual problems of nuclear physics of low and middle energies, radiation solid state physics as well as students specializing in this field (author)

A Regulators Systematic Approach to Physical Protection for Nuclear Facilities

International Nuclear Information System (INIS)

Bayer, Stephan; Doulgeris, Nicholas; Leask, Andrew

2004-01-01

This paper outlines the framework for a physical protection regime which needs to be incorporated into the design and construction phases of nuclear facility. The need for physical protection considerations at the outset of the design of nuclear facilities is explained. It also discusses about the consequences of malicious activity and the management of risk. Various risk and consequences evaluations are undertaken, notably using design basis threat methodology. (author)

Future directions in controlling the LAMPF-PSR Accelerator Complex at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Stuewe, R.; Schaller, S.; Bjorklund, E.; Burns, M.; Callaway, T.; Carr, G.; Cohen, S.; Kubicek, D.; Harrington, M.; Poore, R.; Schultz, D.

1991-01-01

Four interrelated projects are underway whose purpose is to migrate the LAMPF-PSR Accelerator Complex control systems to a system with a common set of hardware and software components. Project goals address problems in performance, maintenance and growth potential. Front-end hardware, operator interface hardware and software, computer systems, network systems and data system software are being simultaneously upgraded as part of these efforts. The efforts are being coordinated to provide for a smooth and timely migration to a client-sever model-based data acquisition and control system. An increased use of the distributed intelligence at both the front-end and operator interface is a key element of the projects. 2 refs., 2 figs

The Low Temperature Microgravity Physics Facility Project

Science.gov (United States)

Chui, T.; Holmes, W.; Lai, A.; Croonquist, A.; Eraker, J.; Abbott, R.; Mills, G.; Mohl, J.; Craig, J.; Balachandra, B.;

Why high-capacity manipulators and lead glass windows

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1981-01-01

The Monitor remote-handling system was developed to maintain the main experimental beam line at the Clinton P. Anderson Meson Physics Facility (LAMPF) of the Los Alamos National Laboratory. The technology and operating experience developed at LAMPF can be applied to other areas where handling of radioactive, hazardous, or toxic materials is required. These could include radiological incidents similar to Three Mile Island and toxic material spills, such as chlorine tank car derailments, where no provision for remote-handling exists. The technology can also be applied to routine radioactive remote-handling operations now conducted in conventional hot cells. These operations are normally done using mechanical master-slave manipulators with viewing through lead glass windows. The conventional facility can be replaced by a plain shielded box with an equivalent of the front end of Monitor inside. Master-slave manipulators of the future should be of 10-kg capacity with a force-reflection threshold of 0.2, minimum size, and provision for total sealing

Polarized photon facilities - windows to new physics

International Nuclear Information System (INIS)

Sandorfi, A.M.

1995-01-01

The status of new and proposed sources of intermediate-energy polarized photons is reviewed. The N → δ transition is discussed as an example of new physics that can be addressed at these facilities through precision measurements of polarization observables

Multisensory experiments and data acquisition systems on the meson facilities

International Nuclear Information System (INIS)

Bystritskij, V.M.

2000-01-01

The paper describes some of the multisensory experiments performed or being performed at the meson factories PSI (Switzerland), TRIUMF (Canada), LAMPF (USA), KEK (Japan), RAL (England) in order to investigate the fundamental processes in elementary particle physics. Designs of various detectors are briefly reviewed, the organizational ideology and the structure of the recording electronics and data acquisition systems for these experiments are considered. The ideology underlying the off-line analysis software is touched upon and the most important results of the investigations at meson factories are given

Physical protection of nuclear facilities and materials. Safeguards and the role of the IAEA in physical protection

International Nuclear Information System (INIS)

Smolej, M.

1999-01-01

The physical protection and security of nuclear facilities and materials concerns utilities, manufactures, the general public, and those who are responsible for licensing and regulating such facilities. The requirements and process to ensure an acceptable physical protection and security system have been evolutionary in nature. This paper reviews the first step of such process: the State's safeguards system and the international safeguards system of the International Atomic Energy Agency (IAEA), including the relationship between these two safeguards systems. The elements of these systems that are reviewed include the State System of Accounting for and Control of Nuclear Material, physical protection measures, and containment and surveillance measures. In addition, the interactions between the State, the facility operator, and the IAEA are described. The paper addresses the IAEA safeguards system, including material accountancy and containment and surveillance; the State safeguards system, including material control and accountancy, and physical protection; the role of the IAEA in physical protection; a summary of safeguards system interactions.(author)

Designing a Physical Security System for Risk Reduction in a Hypothetical Nuclear Facility

International Nuclear Information System (INIS)

Saleh, A.A.; Abd Elaziz, M.

2017-01-01

Physical security in a nuclear facility means detection, prevention and response to threat, the ft, sabotage, unauthorized access and illegal transfer involving radioactive and nuclear material. This paper proposes a physical security system designing concepts to reduce the risk associated with variant threats to a nuclear facility. This paper presents a study of the unauthorized removal and sabotage in a hypothetical nuclear facility considering deter, delay and response layers. More over, the study involves performing any required upgrading to the security system by investigating the nuclear facility layout and considering all physical security layers design to enhance the weakness for risk reduction

Physics Physics Annual Review, 1 April 1981-31 March 1982

International Nuclear Information System (INIS)

1982-12-01

In medium-energy pion physics, considerable progress has been made in understanding the propagation and absorption of pions (deltas) in the nuclear medium. An experiment to study neutrino oscillations is being planned at LAMPF with substantial involvement from Argonne. A major effort is being devoted to the scientific and technical considerations involved in proposing to build a multi-GeV C.W. electron accelerator: GEM at Argonne. In heavy-ion physics, the superconducting linac booster is being used with increasing scientific profit. Construction of the ATLAS facility began in FY 1982 and all progress has been on schedule. The importance of the time component of the weak axial-vector current has been studied through the #betta# decay of 16 N. A precision measurement is under way of the 7 Be(p,#betta#) cross section, one of the key components in the solar neutrino anomaly. In nuclear theory, the coupled-channel code for treating heavy-ion inelastic scattering was completed and application to particular experiments began. Nuclear structure theory was applied to interpret decays of high-spin states and inelastic pion scattering. Results of particular interest were obtained in the nuclear force program where the inclusion of 3-body forces led to simultaneous improvement in the binding of 3 He and 4 He and saturation of nuclear matter. The atomic physics research consists of six experimental programs as follows: (1) dissociation and other interactions of energetic molecular ions in solid and gaseous targets; (2) electron spectroscopy with fast atomic and molecular-ion beams; (3) beam-foil research and collision dynamics of heavy ions; (4) photoionization-photoelectron research; (5) high-resolution, laser-rf spectroscopy with atomic and molecular beams; and (6) theoretical atomic physics

Physics Physics Annual Review, 1 April 1981-31 March 1982

Energy Technology Data Exchange (ETDEWEB)

1982-12-01

In medium-energy pion physics, considerable progress has been made in understanding the propagation and absorption of pions (deltas) in the nuclear medium. An experiment to study neutrino oscillations is being planned at LAMPF with substantial involvement from Argonne. A major effort is being devoted to the scientific and technical considerations involved in proposing to build a multi-GeV C.W. electron accelerator: GEM at Argonne. In heavy-ion physics, the superconducting linac booster is being used with increasing scientific profit. Construction of the ATLAS facility began in FY 1982 and all progress has been on schedule. The importance of the time component of the weak axial-vector current has been studied through the ..beta.. decay of /sup 16/N. A precision measurement is under way of the /sup 7/Be(p,..gamma..) cross section, one of the key components in the solar neutrino anomaly. In nuclear theory, the coupled-channel code for treating heavy-ion inelastic scattering was completed and application to particular experiments began. Nuclear structure theory was applied to interpret decays of high-spin states and inelastic pion scattering. Results of particular interest were obtained in the nuclear force program where the inclusion of 3-body forces led to simultaneous improvement in the binding of /sup 3/He and /sup 4/He and saturation of nuclear matter. The atomic physics research consists of six experimental programs as follows: (1) dissociation and other interactions of energetic molecular ions in solid and gaseous targets; (2) electron spectroscopy with fast atomic and molecular-ion beams; (3) beam-foil research and collision dynamics of heavy ions; (4) photoionization-photoelectron research; (5) high-resolution, laser-rf spectroscopy with atomic and molecular beams; and (6) theoretical atomic physics. (WHK)

Current experiments in elementary particle physics. Revision

International Nuclear Information System (INIS)

Galic, H.; Armstrong, F.E.; von Przewoski, B.

1994-08-01

This report contains summaries of 568 current and recent experiments in elementary particle physics. Experiments that finished taking data before 1988 are excluded. Included are experiments at BEPC (Beijing), BNL, CEBAF, CERN, CESR, DESY, FNAL, INS (Tokyo), ITEP (Moscow), IUCF (Bloomington), KEK, LAMPF, Novosibirsk, PNPI (St. Petersburg), PSI, Saclay, Serpukhov, SLAC, and TRIUMF, and also several underground and underwater experiments. Instructions are given for remote searching of the computer database (maintained under the SLAC/SPIRES system) that contains the summaries

Current Experiments in Particle Physics. 1996 Edition.

Energy Technology Data Exchange (ETDEWEB)

Galic, Hrvoje

2003-06-27

This report contains summaries of current and recent experiments in Particle Physics. Included are experiments at BEPC (Beijing), BNL, CEBAF, CERN, CESR, DESY, FNAL, Frascati, ITEP (Moscow), JINR (Dubna), KEK, LAMPF, Novosibirsk, PNPI (St. Petersburg), PSI, Saclay, Serpukhov, SLAC, and TRIUMF, and also several proton decay and solar neutrino experiments. Excluded are experiments that finished taking data before 1991. Instructions are given for the World Wide Web (WWW) searching of the computer database (maintained under the SLAC-SPIRES system) that contains the summaries.

Current experiments in elementary particle physics. Revision

Energy Technology Data Exchange (ETDEWEB)

Galic, H. [Stanford Linear Accelerator Center, Menlo Park, CA (United States); Armstrong, F.E. [Lawrence Berkeley Lab., CA (United States); von Przewoski, B. [Indiana Univ. Cyclotron Facility, Bloomington, IN (United States)] [and others

1994-08-01

This report contains summaries of 568 current and recent experiments in elementary particle physics. Experiments that finished taking data before 1988 are excluded. Included are experiments at BEPC (Beijing), BNL, CEBAF, CERN, CESR, DESY, FNAL, INS (Tokyo), ITEP (Moscow), IUCF (Bloomington), KEK, LAMPF, Novosibirsk, PNPI (St. Petersburg), PSI, Saclay, Serpukhov, SLAC, and TRIUMF, and also several underground and underwater experiments. Instructions are given for remote searching of the computer database (maintained under the SLAC/SPIRES system) that contains the summaries.

Central collisions of heavy ion physics: Supplemental annual report, October 1, 1987-March 31, 1988

International Nuclear Information System (INIS)

Fung, S.Y.

1988-02-01

This report briefly describes the activities of the Heavy Ion Physics Group at the University of California, Riverside in the six months from October 1, 1987 to March 31, 1988. During this period, our program continues to focus on correlation studies in central collisions at the Bevalac and AGS energies, and neutrino interactions and oscillation studies at LAMPF

Materials performance experience at spallation neutron sources

Energy Technology Data Exchange (ETDEWEB)

Sommer, W.F. [Los Alamos National Laboratory, NM (United States)

1995-10-01

There is a growing, but not yet substantial, data base for materials performance at spallation neutron sources. Specially designed experiments using medium energy protons (650 MeV) have been conducted at the Proton Irradiation Experiment (PIREX) facility at the Swiss Nuclear Institute accelerator (SIN). Specially designed experiments using 760-800 MeV copper target have been completed at the Los Alamos Spallation Radiation Effects Facility (LASREF) at Los Alamos Meson Physics Facility (LAMPF). An extensive material testing program was initiated at LASREF in support of the German spallation neutron source (SNQ) project, before it terminated in 1985.

Medium-Energy Nuclear Data Library (MENDLIB): Phase 1

International Nuclear Information System (INIS)

Siciliano, E.R.; Arthur, E.D.

1987-10-01

This document describes an initial step towards the formation of a computerized on-line data library, which would contain published medium-energy experimental data, and which would serve the basic and applied needs of the medium-energy nuclear physics community. The data emphasized in this project will be from measured charged-particle and meson induced nuclear scattering and reactions; an area for which no such data base presently exists. Access to the data will be through a menu-driven program in a user-friendly environment. The project is divided into three phases: Phase 1 involves compilation of Clinton P. Anderson Meson Physics Facility (LAMPF) data from nucleon and pion induced reactions, Phase 2 includes nucleon and pion data from other medium-energy facilities, and Phase 3 includes electron, light-ion, and possibly kaon and anti-nucleon data. The initial goals, the manner in which they would be pursued, and the resources needed to implement Phase 1 (the pilot phase) are discussed in detail. Possible expansion of Phase 1 to attain the envisioned goals of Phase 2 and 3 are briefly outlined. During all stages of the project, input from the community will be sought via the various facility user groups and the American Physical Society Division of Nuclear Physics. It is proposed that the Applied Nuclear Science Group (T-2) of the Los Alamos National Laboratory oversees the development and implementation of this project, and the LAMPF VAX computers be used as the host computers for on-line access

An alternative analysis of the LSND neutrino oscillation search data on bar νμ→ bar νe

International Nuclear Information System (INIS)

Hill, J.E.

1995-01-01

This analysis of data from the Liquid Scintillator Neutrino Detector (LSND) at the Los Alamos Meson Physics Facility (LAMPF) sets bounds on neutrino oscillations in the appearance channel bar ν μ → bar ν e by searching for the signature of the reaction bar ν e p→e + n: an e + followed by a 2.2 MeV γ ray from neutron capture. Five e ± -γ coincidences are observed in time with the LAMPF beam, with an estimated background of 6.2 events. The 90% confidence limits obtained in this analysis are Δm 2 2 for sin 2 2θ=1, and sin 2 2θ -3 for Δm 2 approx-gt 20 eV 2 . The possible signal at the edge of the detector's sensitivity is mentioned

The Manuel Lujan, Jr. Neutron Scattering Center (LANSCE) experiment reports 1992 run cycle. Progress report

Energy Technology Data Exchange (ETDEWEB)

DiStravolo, M.A. [comp.

1993-09-01

This year was the fifth in which LANSCE ran a formal user program. A call for proposals was issued before the scheduled run cycles, and experiment proposals were submitted by scientists from universities, industry, and other research facilities around the world. An external program advisory committee, which LANSCE shares with the Intense Pulsed Neutron Source (IPNS), Argonne National Laboratory, examined the proposals and made recommendations. At LANSCE, neutrons are produced by spallation when a pulsed, 800-MeV proton beam impinges on a tungsten target. The proton pulses are provided by the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator and an associated Proton Storage Ring (PSR), which can alter the intensity, time structure, and repetition rate of the pulses. The LAMPF protons of Line D are shared between the LANSCE target and the Weapons Neutron Research (WNR) facility, which results in LANSCE spectrometers being available to external users for unclassified research about 80% of each annual LAMPF run cycle. Measurements of interest to the Los Alamos National Laboratory may also be performed and may occupy up to an additional 20% of the available beam time. These experiments are reviewed by an internal program advisory committee. One hundred sixty-seven proposals were submitted for unclassified research and twelve proposals for research of a programmatic interest to the Laboratory; six experiments in support of the LANSCE research program were accomplished during the discretionary periods. Oversubscription for instrument beam time by a factor of three was evident with 839 total days requested and only 371 available for allocation.

The Manuel Lujan, Jr. Neutron Scattering Center (LANSCE) experiment reports 1992 run cycle

International Nuclear Information System (INIS)

DiStravolo, M.A.

1993-09-01

This year was the fifth in which LANSCE ran a formal user program. A call for proposals was issued before the scheduled run cycles, and experiment proposals were submitted by scientists from universities, industry, and other research facilities around the world. An external program advisory committee, which LANSCE shares with the Intense Pulsed Neutron Source (IPNS), Argonne National Laboratory, examined the proposals and made recommendations. At LANSCE, neutrons are produced by spallation when a pulsed, 800-MeV proton beam impinges on a tungsten target. The proton pulses are provided by the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator and an associated Proton Storage Ring (PSR), which can alter the intensity, time structure, and repetition rate of the pulses. The LAMPF protons of Line D are shared between the LANSCE target and the Weapons Neutron Research (WNR) facility, which results in LANSCE spectrometers being available to external users for unclassified research about 80% of each annual LAMPF run cycle. Measurements of interest to the Los Alamos National Laboratory may also be performed and may occupy up to an additional 20% of the available beam time. These experiments are reviewed by an internal program advisory committee. One hundred sixty-seven proposals were submitted for unclassified research and twelve proposals for research of a programmatic interest to the Laboratory; six experiments in support of the LANSCE research program were accomplished during the discretionary periods. Oversubscription for instrument beam time by a factor of three was evident with 839 total days requested and only 371 available for allocation

Nuclear physics accelerator facilities

International Nuclear Information System (INIS)

1985-01-01

The Department of Energy's Nuclear Physics program is a comprehensive program of interdependent experimental and theoretical investigation of atomic nuclei. Long range goals are an understanding of the interactions, properties, and structures of atomic nuclei and nuclear matter at the most elementary level possible and an understanding of the fundamental forces of nature by using nuclei as a proving ground. Basic ingredients of the program are talented and imaginative scientists and a diversity of facilities to provide the variety of probes, instruments, and computational equipment needed for modern nuclear research. Approximately 80% of the total Federal support of basic nuclear research is provided through the Nuclear Physics program; almost all of the remaining 20% is provided by the National Science Foundation. Thus, the Department of Energy (DOE) has a unique responsibility for this important area of basic science and its role in high technology. Experimental and theoretical investigations are leading us to conclude that a new level of understanding of atomic nuclei is achievable. This optimism arises from evidence that: (1) the mesons, protons, and neutrons which are inside nuclei are themselves composed of quarks and gluons and (2) quantum chromodynamics can be developed into a theory which both describes correctly the interaction among quarks and gluons and is also an exact theory of the strong nuclear force. These concepts are important drivers of the Nuclear Physics program

Distribution of physical activity facilities in Scotland by small area measures of deprivation and urbanicity

Directory of Open Access Journals (Sweden)

Ogilvie David

2010-10-01

Full Text Available Abstract Background The aim of this study was to examine the distribution of physical activity facilities by area-level deprivation in Scotland, adjusting for differences in urbanicity, and exploring differences between and within the four largest Scottish cities. Methods We obtained a list of all recreational physical activity facilities in Scotland. These were mapped and assigned to datazones. Poisson and negative binomial regression models were used to investigate associations between the number of physical activity facilities relative to population size and quintile of area-level deprivation. Results The results showed that prior to adjustment for urbanicity, the density of all facilities lessened with increasing deprivation from quintiles 2 to 5. After adjustment for urbanicity and local authority, the effect of deprivation remained significant but the pattern altered, with datazones in quintile 3 having the highest estimated mean density of facilities. Within-city associations were identified between the number of physical activity facilities and area-level deprivation in Aberdeen and Dundee, but not in Edinburgh or Glasgow. Conclusions In conclusion, area-level deprivation appears to have a significant association with the density of physical activity facilities and although overall no clear pattern was observed, affluent areas had fewer publicly owned facilities than more deprived areas but a greater number of privately owned facilities.

Physics detector simulation facility system software description

International Nuclear Information System (INIS)

Allen, J.; Chang, C.; Estep, P.; Huang, J.; Liu, J.; Marquez, M.; Mestad, S.; Pan, J.; Traversat, B.

1991-12-01

Large and costly detectors will be constructed during the next few years to study the interactions produced by the SSC. Efficient, cost-effective designs for these detectors will require careful thought and planning. Because it is not possible to test fully a proposed design in a scaled-down version, the adequacy of a proposed design will be determined by a detailed computer model of the detectors. Physics and detector simulations will be performed on the computer model using high-powered computing system at the Physics Detector Simulation Facility (PDSF). The SSCL has particular computing requirements for high-energy physics (HEP) Monte Carlo calculations for the simulation of SSCL physics and detectors. The numerical calculations to be performed in each simulation are lengthy and detailed; they could require many more months per run on a VAX 11/780 computer and may produce several gigabytes of data per run. Consequently, a distributed computing environment of several networked high-speed computing engines is envisioned to meet these needs. These networked computers will form the basis of a centralized facility for SSCL physics and detector simulation work. Our computer planning groups have determined that the most efficient, cost-effective way to provide these high-performance computing resources at this time is with RISC-based UNIX workstations. The modeling and simulation application software that will run on the computing system is usually written by physicists in FORTRAN language and may need thousands of hours of supercomputing time. The system software is the ''glue'' which integrates the distributed workstations and allows them to be managed as a single entity. This report will address the computing strategy for the SSC

Atomic physics at the future facility for antiproton and ion research: a status report

International Nuclear Information System (INIS)

Gumberidze, A

2013-01-01

The new international accelerator Facility for Antiproton and Ion Research (FAIR) which is currently under construction in Darmstadt has key features that offer a wide range of exciting new opportunities in the field of atomic physics and related fields. The facility will provide highest intensities of relativistic beams of both stable and unstable heavy nuclei, in combination with the strong electromagnetic fields generated by high-power lasers, thus allowing to widen atomic physics research into completely new domains. In the current contribution, a short overview of the SPARC (Stored Particle Atomic physics Research Collaboration) research programme at the FAIR facility is given. Furthermore, we present the current strategy for the realization of the envisioned SPARC physics programme at the modularized start version of the FAIR facility. (paper)

Current experiments in particle physics - particle data group

Energy Technology Data Exchange (ETDEWEB)

Galic, H. [Stanford Univ., CA (United States). Stanford Linear Accelerator Center; Lehar, F. [Centre d`Etudes Nucleaires de Saclay, Gif-sur-Yvette (France); Kettle, P.R. [Paul Scherrer Institute, Villigen (Switzerland)] [and others

1996-09-01

This report contains summaries of current and recent experiments in Particle Physics. Included are experiments at BEPC (Beijing), BNL, CEBAF, CERN, CESR, DESY, FNAL, Frascati, ITEP (Moscow), JINR (Dubna), KEK, LAMPF, Novosibirsk, PNPI (St. Petersburg), PSI, Saclay, Serpukhov, SLAC, and TRIUMF, and also several proton decay and solar neutrino experiments. Excluded are experiments that finished taking data before 1991. Instructions are given for the World Wide Web (WWW) searching of the computer database (maintained under the SLAC-SPIRES system) that contains the summaries.

Current experiments in particle physics - particle data group

International Nuclear Information System (INIS)

Galic, H.; Kettle, P.R.

1996-09-01

This report contains summaries of current and recent experiments in Particle Physics. Included are experiments at BEPC (Beijing), BNL, CEBAF, CERN, CESR, DESY, FNAL, Frascati, ITEP (Moscow), JINR (Dubna), KEK, LAMPF, Novosibirsk, PNPI (St. Petersburg), PSI, Saclay, Serpukhov, SLAC, and TRIUMF, and also several proton decay and solar neutrino experiments. Excluded are experiments that finished taking data before 1991. Instructions are given for the World Wide Web (WWW) searching of the computer database (maintained under the SLAC-SPIRES system) that contains the summaries

Physics at a future Neutrino Factory and super-beam facility

International Nuclear Information System (INIS)

Bandyopadhyay, A; Choubey, S; Gandhi, R; Goswami, S; Roberts, B L; Bouchez, J; Antoniadis, I; Ellis, J; Giudice, G F; Schwetz, T; Umasankar, S; Karagiorgi, G; Aguilar-Arevalo, A; Conrad, J M; Shaevitz, M H; Pascoli, S; Geer, S; Campagne, J E; Rolinec, M; Blondel, A

2009-01-01

The conclusions of the Physics Working Group of the International Scoping Study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried out by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and Super-beams, Laboratori Nazionali di Frascati, Rome, 21-26 June 2005) and NuFact06 (Ivine, CA, 24-30 August 2006). The physics case for an extensive experimental programme to understand the properties of the neutrino is presented and the role of high-precision measurements of neutrino oscillations within this programme is discussed in detail. The performance of second-generation super-beam experiments, beta-beam facilities and the Neutrino Factory are evaluated and a quantitative comparison of the discovery potential of the three classes of facility is presented. High-precision studies of the properties of the muon are complementary to the study of neutrino oscillations. The Neutrino Factory has the potential to provide extremely intense muon beams and the physics potential of such beams is discussed in the final section of the report.

The physical protection of nuclear material and nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-01

The latest review (1993) of this document was of limited scope and resulted in changes to the text of INFCIRC/225/Rev.2 designed to make the categorization table in that document consistent with the categorization table contained in the Convention on Physical Protection of Nuclear Materials. Consequently, a comprehensive review of INFCIRC/225 has not been conducted since 1989. Consequently, a meeting of national experts was convened from 2-5 June 1998 and from 27-29 October 1998 for a thorough review of INFCIRC/225/Rev.3. The revised document reflects the recommendations of the national experts to improve the structure and clarity of the document and to take account of improved technology and current international and national practices. In particular, a chapter has been added which provides specific recommendations related to sabotage of nuclear facilities and nuclear material. As a result of this addition, the title has been changed to 'The Physical Protection of Nuclear Material and Nuclear Facilities'. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States.

The physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

1999-06-01

The latest review (1993) of this document was of limited scope and resulted in changes to the text of INFCIRC/225/Rev.2 designed to make the categorization table in that document consistent with the categorization table contained in the Convention on Physical Protection of Nuclear Materials. Consequently, a comprehensive review of INFCIRC/225 has not been conducted since 1989. Consequently, a meeting of national experts was convened from 2-5 June 1998 and from 27-29 October 1998 for a thorough review of INFCIRC/225/Rev.3. The revised document reflects the recommendations of the national experts to improve the structure and clarity of the document and to take account of improved technology and current international and national practices. In particular, a chapter has been added which provides specific recommendations related to sabotage of nuclear facilities and nuclear material. As a result of this addition, the title has been changed to 'The Physical Protection of Nuclear Material and Nuclear Facilities'. The recommendations presented in this IAEA document reflect a broad consensus among Member States on the requirements which should be met by systems for the physical protection of nuclear materials and facilities. It is hoped that they will provide helpful guidance for Member States

Adolescents' physical activity: competition between perceived neighborhood sport facilities and home media resources.

Science.gov (United States)

Wong, Bonny Yee-Man; Cerin, Ester; Ho, Sai-Yin; Mak, Kwok-Kei; Lo, Wing-Sze; Lam, Tai-Hing

2010-04-01

To examine the independent, competing, and interactive effects of perceived availability of specific types of media in the home and neighborhood sport facilities on adolescents' leisure-time physical activity (PA). Survey data from 34 369 students in 42 Hong Kong secondary schools were collected (2006-07). Respondents reported moderate-to-vigorous leisure-time PA, presence of sport facilities in the neighborhood and of media equipment in the home. Being sufficiently physically active was defined as engaging in at least 30 minutes of non-school leisure-time PA on a daily basis. Logistic regression and post-estimation linear combinations of regression coefficients were used to examine the independent and competing effects of sport facilities and media equipment on leisure-time PA. Perceived availability of sport facilities was positively (OR(boys) = 1.17; OR(girls) = 1.26), and that of computer/Internet negatively (OR(boys) = 0.48; OR(girls) = 0.41), associated with being sufficiently active. A significant positive association between video game console and being sufficiently active was found in girls (OR(girls) = 1.19) but not in boys. Compared with adolescents without sport facilities and media equipment, those who reported sport facilities only were more likely to be physically active (OR(boys) = 1.26; OR(girls) = 1.34), while those who additionally reported computer/Internet were less likely to be physically active (OR(boys) = 0.60; OR(girls) = 0.54). Perceived availability of sport facilities in the neighborhood may positively impact on adolescents' level of physical activity. However, having computer/Internet may cancel out the effects of active opportunities in the neighborhood. This suggests that physical activity programs for adolescents need to consider limiting the access to computer-mediated communication as an important intervention component.

CAMAC based computer--computer communications via microprocessor data links

International Nuclear Information System (INIS)

Potter, J.M.; Machen, D.R.; Naivar, F.J.; Elkins, E.P.; Simmonds, D.D.

1976-01-01

Communications between the central control computer and remote, satellite data acquisition/control stations at The Clinton P. Anderson Meson Physics Facility (LAMPF) is presently accomplished through the use of CAMAC based Data Link Modules. With the advent of the microprocessor, a new philosophy for digital data communications has evolved. Data Link modules containing microprocessor controllers provide link management and communication network protocol through algorithms executed in the Data Link microprocessor

Future directions in intermediate energy heavy ion physics. A proposed expansion of the Holifield Facility

Energy Technology Data Exchange (ETDEWEB)

1986-02-01

A proposal is presented for a major accelerator addition to the Holifield Heavy Ion Research Facility. The expanded facility will provide ion beams of mass 1 to 238 amu with a combination of energy, intensity, momentum resolution, and beam quality not currently available at any other facility in North America. The physics motivation for such an addition is discussed, and involves physics dominated by meson-exchange forces, Coulomb-force dominated physics, and possibly a regime where the quark and gluon degrees of freedom are significant. The physics research would include topics in atomic and interdisciplinary areas as well as nuclear physics. Some remarks are made on the merits of Oak Ridge as a site for this facility, placing the proposal in some historical perspective. The accelerator system is then described, giving the required beam properties, and the parameters of the synchrotron ring components, injection, ring magnets, RF systems, vacuum system, and electron cooling system and stochastic cooling system requirements. Also described are such facilities as buildings, beam transport and shielding, and experimental facilities, including target areas. (LEW)

Future directions in intermediate energy heavy ion physics. A proposed expansion of the Holifield Facility

International Nuclear Information System (INIS)

1986-02-01

A proposal is presented for a major accelerator addition to the Holifield Heavy Ion Research Facility. The expanded facility will provide ion beams of mass 1 to 238 amu with a combination of energy, intensity, momentum resolution, and beam quality not currently available at any other facility in North America. The physics motivation for such an addition is discussed, and involves physics dominated by meson-exchange forces, Coulomb-force dominated physics, and possibly a regime where the quark and gluon degrees of freedom are significant. The physics research would include topics in atomic and interdisciplinary areas as well as nuclear physics. Some remarks are made on the merits of Oak Ridge as a site for this facility, placing the proposal in some historical perspective. The accelerator system is then described, giving the required beam properties, and the parameters of the synchrotron ring components, injection, ring magnets, RF systems, vacuum system, and electron cooling system and stochastic cooling system requirements. Also described are such facilities as buildings, beam transport and shielding, and experimental facilities, including target areas

Radiation hardening of diagnostics

International Nuclear Information System (INIS)

Siemon, R.E.

1991-01-01

The world fusion program has advanced to the stage where it is appropriate to construct a number of devices for the purpose of burning DT fuel. In these next-generation experiments, the expected flux and fluence of 14 MeV neutrons and associated gamma rays will pose a significant challenge to the operation and diagnostics of the fusion device. Radiation effects include structural damage to materials such as vacuum windows and seals, modifications to electrical properties such as electrical conductivity and dielectric strength and impaired optical properties such as reduced transparency and luminescence of windows and fiber optics during irradiation. In preparation for construction and operation of these new facilities, the fusion diagnostics community needs to work with materials scientists to develop a better understanding of radiation effects, and to undertake a testing program aimed at developing workable solutions for this multi-faceted problem. A unique facility to help in this regard is the Los Alamos Spallation Radiation Effects Facility, a neutron source located at the beam stop of the world's most powerful accelerator, the Los Alamos Meson Physics Facility (LAMPF). The LAMPF proton beam generates 10 16 neutrons per second because of ''spallation'' reactions when the protons collide with the copper nuclei in the beam stop

The Physics Perspectives at the Future Accelerator Facility FAIR

CERN Document Server

Stroth, J

2004-01-01

The physics perspective of the approved future international accelerator Facility for Anti-proton and Ion Research (FAIR) near Darmstadt, Germany will be outlined. The physics programme will comprise many body aspects of matter ranging from macroscopic system like highly correlated plasmas down to the properties of baryons and nuclear matter at high baryon densities. Through fragmentation of intense ion beams investigations with beams of short-lived radioactive nuclei far from stability will be possible. The addressed physics questions concern nuclear structure at the drip-lines, areas of astrophysics and nucleo-synthesis in supernovae and other stellar processes, as well as tests of fundamental symmetry. The structure of baryons and their limits of their existence is the interest of the two large experimental set-ups PANDA and CBM. Finally QED will be studied in extremely strong field effects and also the interaction of ions with matter. The future facility will feature a double-ring synchrotron SIS100/300 a...

[Medium energy physics at Syracuse University: Technical progress report

International Nuclear Information System (INIS)

Souder, P.A.

1986-01-01

The primary focus of research has been an experiment at the MIT-Bates Linear Accelerator Center to measure the spin-dependence of elastic scattering of electrons from carbon. The Syracuse University Medium Energy Physics Group is also part of a collaboration which will measure the tensor polarization of deuterons scattered by electrons. Finally, analysis has been completed for an experiment at LAMPF in which the first observation of the exotic ion μ + e - e - was made. 17 refs., 18 figs., 2 tabs

Evaluation of physical facilities and processing operations of major ...

African Journals Online (AJOL)

... of these abattoirs were evaluated based on their presence and functional status. ... of safe and wholesome meat and meat products for human consumption. Keywords: Abattoir, Butcher, Meat, Physical facilities, Public health, Standard ...

Utilization of pion production accelerators in biomedical applications

International Nuclear Information System (INIS)

Rosen, L.

1979-01-01

A discussion is presented of biomedical applications of pion-producing accelerators in a number of areas, but with emphasis on pion therapy for treatment of solid, non-metastasized malignancies. The problem of cancer management is described from the standpoint of the physicist, magnitude of the problem, and its social and economic impact. Barriers to successful treatment are identified, mainly with regard to radiation therapy. The properties and characteristics of π mesons, first postulated on purely theoretical grounds by H. Yukawa are described. It is shown how they can be used to treat human cancer and why they appear to have dramatic advantages over conventional forms of radiation by virtue of the fact that they permit localization of energy deposition, preferentially, in the tumor volume. The Clinton P. Anderson Meson Physics Facility (LAMPF), and its operating characteristics, are briefly described, with emphasis on the biomedical channel. The design of a relatively inexpensive accelerator specifically for pion therapy is described as is also the status of clinical trials using the existing Clinton P. Anderson Meson Physics Facility. The advantages of proton over electron accelerator for the production of high quality, high intensity negative pion beams suitable for radiation therapy of malignancies is also addressed. Other current, medically related applications of LAMPF technology are also discussed

The environment and urban adolescents' use of recreational facilities for physical activity: a qualitative study.

Science.gov (United States)

Ries, Amy V; Gittelsohn, Joel; Voorhees, Carolyn C; Roche, Kathleen M; Clifton, Kelly J; Astone, Nan M

2008-01-01

Investigate environmental factors influencing the use of recreational facilities for physical activity by urban African-American adolescents. Qualitative in-depth interviews and direct observation. Two public high schools and 24 public recreational facilities in Baltimore, Maryland. Forty-eight African-American adolescents aged 14 to 18 years. Data from 48 in-depth interviews and 26 observations were coded using NVivo software and analyzed using the constant comparative method. Facility use is influenced by characteristics of the physical, social, organizational, and economic environments. Adolescents are attracted to low-cost, well-maintained facilities that offer preferred activities and that are within close proximity to home. Adolescents with limited access to facilities use alternative play spaces, like the streets or vacant lots, where they risk injury from falling or being hit by a car. They are drawn to facilities where they find active adolescents, and they avoid those where young people are engaged in drug or gang activity. Concerns about facility safety largely determine use, particularly for adolescent girls. Previous research points to the importance of increasing facility availability as a means of promoting physical activity, particularly in minority communities in which availability is disproportionately limited. This study shows that, while availability is important, additional facility characteristics should be considered when using environmental change to promote facility use for physical activity.

Experimental investigations in particle physics at intermediate energies: Progress report, December 1, 1986 to November 30, 1987

International Nuclear Information System (INIS)

Auerbach, L.B.; Highland, V.L.; McFarlane, K.W.

1987-06-01

The neutrino experiment at LAMPF (No. 764) has been completed with reports in preparation; the nu/sub μ/C scattering cross section agreed with the Fermi Gas model, and no evidence was seen for nu/sub μ/ → nu/sub e/ oscillations. The LAMPF Crystal Box work is almost complete, with publications on rare pion and muon decays. New limits have been set for a wide variety of decay modes: π 0 → 3γ -8 , π 0 → 4γ -8 , μ + → e + γγ -11 , μ + → e + γ familon -8 . In addition, the sign of the ratio of axial vector to vector in π + → e + nuγ was determined to be positive. A new computing facility based on UNIX has been in operation. The rare Kaon decay (lepton-non-conserving and CP-violating decays) experiment at Brookhaven received beam in February and May 1987; we expect to extract an upper limit of a few times 10 -9 for the decay K/sub L/ → μe from this first run

Correlates of distances traveled to use recreational facilities for physical activity behaviors

Directory of Open Access Journals (Sweden)

Bulsara Max

2006-07-01

Full Text Available Abstract Background Information regarding how far people are willing to travel to use destinations for different types of recreational physical activity behaviors is limited. This study examines the demographic characteristics, neighborhood opportunity and specific-physical activity behaviors associated with distances traveled to destinations used for recreational physical activity. Methods A secondary analysis was undertaken of data (n = 1006 from a survey of Western Australian adults. Road network distances between respondents' homes and 1 formal recreational facilities; 2 beaches and rivers; and 3 parks and ovals used for physical activity were determined. Associations between distances to destinations and demographic characteristics, neighborhood opportunity (number of destinations within 1600 meters of household, and physical activity behaviors were examined. Results Overall, 56.3% of respondents had used a formal recreational facility, 39.9% a beach or river, and 38.7% a park or oval. The mean distance traveled to all destinations used for physical activity was 5463 ± 5232 meters (m. Distances traveled to formal recreational facilities, beaches and rivers, and parks and ovals differed depending on the physical activity undertaken. Younger adults traveled further than older adults (7311.8 vs. 6012.6 m, p = 0.03 to use beaches and rivers as did residents of socio-economically disadvantaged areas compared with those in advantaged areas (8118.0 vs. 7311.8 m, p = 0.02. Club members traveled further than non-members to use parks and ovals (4156.3 vs. 3351.6 meters, p = 0.02. The type of physical activity undertaken at a destination and number of neighborhood opportunities were also associated with distance traveled for all destination types. Conclusion The distances adults travel to a recreational facility depends on the demographic characteristics, destination type, physical activity behavior undertaken at that destination, and number of

Microprocessor-controlled CAMAC data link module

International Nuclear Information System (INIS)

Potter, J.M.

1978-05-01

Communication between the central control computer and remote, satellite data-acquisition/control stations at the Clinton P. Anderson Meson Physics Facility (LAMPF) is presently accomplished through the use of CAMAC-based Data Link modules. With the advent of the microprocessor, a new philosophy for digital data communications has evolved. Data Link modules containing microprocessor controllers provide link management and communication network protocol through algorithms executed in the Data Link microprocessor. 13 figures

Physics at a future Neutrino Factory and super-beam facility

CERN Document Server

Bandyopadhyay, A; Gandhi, R; Goswami, S; Roberts, B L; Bouchez, J; Antoniadis, I; Ellis, J; Giudice, G F; Schwetz, T; Umansankar, S; Karagiorgi, G; Aguilar-Arevalo, A; Conrad, J M; Shaevitz, M H; Pascoli, Silvia; Geer, S; Rolinec, M; Blondel, A; Campanelli, M; Kopp, J; Lindner, M; Peltoniemi, J; Dornan, P J; Long, K; Matsushita, T; Rogers, C; Uchida, Y; Dracos, M; Whisnant, K; Casper, D; Chen, Mu-Chun; Popov, B; Aysto, J; Marfatia, D; Okada, Y; Sugiyama, H; Jungmann, K; Lesgourgues, J; Murayama, France H; Zisman, M; Tortola, M A; Friedland, A; Antusch, S; Biggio, C; Donini, A; Fernandez-Martinez, E; Gavela, B; Maltoni, M; Lopez-Pavon, J; Rigolin, S; Mondal, N; Palladino, V; Filthaut, F; Albright, C; de Gouvea, A; Kuno, Y; Nagashima, Y; Mezzetoo, M; Lola, S; Langacker, P; Baldini, A; Nunokawa, H; Meloni, D; Diaz, M; King, S F; Zuber, K; Akeroyd, A G; Grossman, Y; Farzan, Y; Tobe, K; Aoki, Mayumi; Kitazawa, N; Yasuda, O; Petcov, S; Romanino, A; Chimenti, P; Vacchi, A; Smirnov, A Yu; Couce, Italy E; Gomez-Cadenas, J J; Hernandez, P; Sorel, M; Valle, J W F; Harrison, P F; Lundardini, C; Nelson, J K; Barger, V; Everett, L; Huber, P; Winter, W; Fetscher, W; van der Schaaf, A

2009-01-01

The conclusions of the Physics Working Group of the international scoping study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and Superbeams, Laboratori Nazionali di Frascati, Rome, June 21-26, 2005) and NuFact06 (Ivine, California, 24{30 August 2006). The physics case for an extensive experimental programme to understand the properties of the neutrino is presented and the role of high-precision measurements of neutrino oscillations within this programme is discussed in detail. The performance of second generation super-beam experiments, beta-beam facilities, and the Neutrino Factory are evaluated and a quantitative comparison of the discovery potential of the three classes of facility is presented. High-precision studies of the properties of the muon are complementary to the study of neutrino oscillations. The Neutrino Factory has the potential to provide ...

The Manuel Lujan, Jr. Neutron Scattering Center, LANSCE experiment reports: 1990 Run Cycle

Energy Technology Data Exchange (ETDEWEB)

DiStravolo, M.A. (comp.)

1991-10-01

This year was the third in which LANSCE ran a formal user program. A call for proposals was issued before the scheduled run cycles, and experiment proposals were submitted by scientists from universities, industry, and other research facilities around the world. An external program advisory committee, which LANSCE shares with the Intense Pulsed Neutron Source (IPNS), Argonne National Laboratory examined the proposals and made recommendations. At LANSCE, neutrons are produced by spallation when a pulsed, 800-MeV proton beam impinges on a tungsten target. The proton pulses are provided by the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator and an associated Proton Storage Ring (PSR), which can alter the intensity, time structure, and repetition rate of the pulses. The LAMPF protons of Line D are shared between the LANSCE target and the Weapons Neutron Research facility, which results in LANSCE spectrometers being available to external users for unclassified research about 80% of each six-month LAMPF run cycle. Measurements of interest to the Los Alamos National Laboratory may also be performed and may occupy up to an additional 20% of the available beam time. These experiments are reviewed by an internal program advisory committee. One hundred thirty-four proposals were submitted for unclassified research and twelve proposals for research of a programmatic nature to the Laboratory. Our definition of beam availability is when the proton current from the PSR exceeds 50% of the planned value. The PSR ran at 65{mu}A current (average) at 20 Hz for most of 1990. All of the scheduled experiments were performed and experiments in support of the LANSCE research program were accomplished during the discretionary periods.

The Manuel Lujan, Jr. Neutron Scattering Center, LANSCE experiment reports: 1990 Run Cycle

International Nuclear Information System (INIS)

DiStravolo, M.A.

1991-10-01

This year was the third in which LANSCE ran a formal user program. A call for proposals was issued before the scheduled run cycles, and experiment proposals were submitted by scientists from universities, industry, and other research facilities around the world. An external program advisory committee, which LANSCE shares with the Intense Pulsed Neutron Source (IPNS), Argonne National Laboratory examined the proposals and made recommendations. At LANSCE, neutrons are produced by spallation when a pulsed, 800-MeV proton beam impinges on a tungsten target. The proton pulses are provided by the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator and an associated Proton Storage Ring (PSR), which can alter the intensity, time structure, and repetition rate of the pulses. The LAMPF protons of Line D are shared between the LANSCE target and the Weapons Neutron Research facility, which results in LANSCE spectrometers being available to external users for unclassified research about 80% of each six-month LAMPF run cycle. Measurements of interest to the Los Alamos National Laboratory may also be performed and may occupy up to an additional 20% of the available beam time. These experiments are reviewed by an internal program advisory committee. One hundred thirty-four proposals were submitted for unclassified research and twelve proposals for research of a programmatic nature to the Laboratory. Our definition of beam availability is when the proton current from the PSR exceeds 50% of the planned value. The PSR ran at 65μA current (average) at 20 Hz for most of 1990. All of the scheduled experiments were performed and experiments in support of the LANSCE research program were accomplished during the discretionary periods

High-energy-physics studies. Progress report, Part I. Experimental program

International Nuclear Information System (INIS)

1982-01-01

The experimental high energy physics program at Ohio State University for 1982 is described. The following topics are discussed: a search for neutrino oscillations at LAMPF; measuring charm and beauty decays via hadronic production in a hybrid emulsion spectrometer; prompt neutrino production experiment; search for long-lived particles from neutrino interactions in a tagged emulsion spectrometer; electron-positron interactions at CESR-CLEO; a search for exotic forms of stable matter; and development of computer systems for data processing and for development of detectors

Associations between Moderate-to-Vigorous Physical Activity and Neighbourhood Recreational Facilities: The Features of the Facilities Matter

Directory of Open Access Journals (Sweden)

Ka Yiu Lee

2014-12-01

Full Text Available Objectives: To examine the associations between objectively-assessed moderate-to-vigorous physical activity (MVPA and perceived/objective measures of neighbourhood recreational facilities categorized into indoor or outdoor, public, residential or commercial facilities. The associations between facility perceptions and objectively-assessed numbers of recreational facilities were also examined. Method: A questionnaire was used on 480 adults to measure local facility perceptions, with 154 participants wearing ActiGraph accelerometers for ≥4 days. The objectively-assessed number of neighbourhood recreational facilities were examined using direct observations and Geographical Information System data. Results: Both positive and negative associations were found between MVPA and perceived/objective measures of recreational facilities. Some associations depended on whether the recreational facilities were indoor or outdoor, public or residential facilities. The objectively-assessed number of most public recreational facilities was associated with the corresponding facility perceptions, but the size of effect was generally lower than for residential recreational facilities. Conclusions: The objectively-assessed number of residential outdoor table tennis courts and public indoor swimming pools, the objectively-assessed presence of tennis courts and swimming pools, and the perceived presence of bike lanes and swimming pools were positive determinants of MVPA. It is suggested to categorize the recreational facilities into smaller divisions in order to identify unique associations with MVPA.

Physics Detector Simulation Facility Phase II system software description

International Nuclear Information System (INIS)

Scipioni, B.; Allen, J.; Chang, C.; Huang, J.; Liu, J.; Mestad, S.; Pan, J.; Marquez, M.; Estep, P.

1993-05-01

This paper presents the Physics Detector Simulation Facility (PDSF) Phase II system software. A key element in the design of a distributed computing environment for the PDSF has been the separation and distribution of the major functions. The facility has been designed to support batch and interactive processing, and to incorporate the file and tape storage systems. By distributing these functions, it is often possible to provide higher throughput and resource availability. Similarly, the design is intended to exploit event-level parallelism in an open distributed environment

The liquid scintillator neutrino detector and LAMPF neutrino source

Energy Technology Data Exchange (ETDEWEB)

Athanassopoulos, C.; Auerbach, L.B.; Bauer, D.; Bolton, R.D.; Burman, R.L.; Cohen, I.; Caldwell, D.O.; Dieterle, B.D.; Donahue, J.B.; Eisner, A.M.; Fazely, A.; Federspiel, F.J.; Garvey, G.T.; Gray, M.; Gunasingha, R.M.; Highland, V.; Imlay, R.; Johnston, K.; Kim, H.J.; Louis, W.C.; Lu, A.; Margulies, J.; Mills, G.B.; McIlhany, K.; Metcalf, W.; Reeder, R.A.; Sandberg, V.; Schillaci, M.; Smith, D.; Stancu, I.; Strossman, W.; Tayloe, R.; VanDalen, G.J.; Vernon, W.; Wang, Y.-X.; White, D.H.; Whitehouse, D.; Works, D.; Xiao, Y.; Yellin, S. [California Univ., Riverside, CA (United States)]|[University of California, San Diego, CA 92093 (United States)]|[University of California, Santa Barbara, CA 93106 (United States)]|[University of California, Intercampus Institute for Research at Particle Accelerators, Stanford, CA 94309 (United States)]|[Embry Riddle Aeronautical University, Prescott, AZ 86301 (United States)]|[Linfield College, McMinnville, OR 97128 (United States)]|[Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)]|[Louisiana State University, Baton Rouge, LA 70803 (United States)]|[Louisiana Tech University, Ruston, LA 71272 (United States)]|[University of New Mexico, Albuquerque, NM 87131 (United States)]|[Southern University, Baton Rouge, LA 70813 (United States)]|[Temple University, Philadelphia, PA 19122 (United States)

1997-03-21

A search for neutrino oscillations of the type {nu}{sub {mu}}{yields}{nu}{sub e} has been conducted at the Los Alamos Meson Physics Facility using {nu}{sub {mu}} from muon decay at rest. Evidence for this transition has been reported previously. This paper discusses in detail the experimental setup, detector operation and neutrino source, including aspects relevant to oscillation searches in the muon decay-at-rest and pion decay in flight channels. (orig.).

Experiment to investigate anti ν/sub μ/ → anti ν/sub e/ oscillations at Los Alamos Meson Physics Facility

International Nuclear Information System (INIS)

Kruse, H.W.; Toevs, J.W.

1981-01-01

An experiment, being planned at LAMPF, aims to investigate a possible neutrino oscillation channel, anti ν/sub μ/ → anti ν/sub e/. If anti ν/sub μ/, produced in the LAMPF beam stop, oscillate to anti ν/sub e/, then interactions anti ν/sub e/ + p → e + + n, may be detected. A large volume liquid scintillator (4470 liter) emplaced at 33 m from the beam stop, detects e + and n, after moderation in the hydrogenous liquid and capture in Gd, loaded into the scintillator. Our anticipated signal rate is currently estimated at 1.67 (sigma m 2 ) 2 /day assuming full amplitude oscillation. The corresponding counting rate, assuming all anti ν/sub μ/ have oscillated to anti ν/sub e/ at the detector is 1.5/day. Cosmic rates are estimated at 0.033/day. Correlated backgrounds from the beam stop are calculated to be small in comparison to cosmic events, except for reactions of ν/sub e/ in Pb. These reactions may be reduced with an Fe shield within the detector. With the above rate, a limit on the sensitivity of our experiment for the value of sigma m 2 is estimated at 0.12 eV 2 with 70 days of counting. Detector features, estimated background rates, and sensitivity values are discussed

Accelerator-based neutrino oscillation searches

International Nuclear Information System (INIS)

Whitehouse, D.A.; Rameika, R.; Stanton, N.

1993-01-01

This paper attempts to summarize the neutrino oscillation section of the Workshop on Future Directions in Particle and Nuclear Physics at Multi-GeV Hadron Beam Facilities. There were very lively discussions about the merits of the different oscillation channels, experiments, and facilities, but we believe a substantial consensus emerged. First, the next decade is one of great potential for discovery in neutrino physics, but it is also one of great peril. The possibility that neutrino oscillations explain the solar neutrino and atmospheric neutrino experiments, and the indirect evidence that Hot Dark Matter (HDM) in the form of light neutrinos might make up 30% of the mass of the universe, point to areas where accelerator-based experiments could play a crucial role in piecing together the puzzle. At the same time, the field faces a very uncertain future. The LSND experiment at LAMPF is the only funded neutrino oscillation experiment in the United States and it is threatened by the abrupt shutdown of LAMPF proposed for fiscal 1994. The future of neutrino physics at the Brookhaven National Laboratory AGS depends the continuation of High Energy Physics (HEP) funding after the RHIC startup. Most proposed neutrino oscillation searches at Fermilab depend on the completion of the Main Injector project and on the construction of a new neutrino beamline, which is uncertain at this point. The proposed KAON facility at TRIUMF would provide a neutrino beam similar to that at the AGS but with a much increase intensity. The future of KAON is also uncertain. Despite the difficult obstacles present, there is a real possibility that we are on the verge of understanding the masses and mixings of the neutrinos. The physics importance of such a discovery can not be overstated. The current experimental status and future possibilities are discussed below

A program in medium-energy nuclear physics

International Nuclear Information System (INIS)

Berman, B.L.; Dhuga, K.S.

1992-01-01

This report reviews progress on our nuclear-physics program for the last year, and includes as well copies of our publications and other reports for that time period. The structure of this report follows that of our 1991 Renewal Proposal and Progress Report: Sec. II outlines our research activities aimed at future experiments at CEBAF, NIKHEF, and Bates; Sec. III gives results of our recent research activities at NIKHEF, LAMPF, and elsewhere; Sec. IV provides an update of our laboratory activities at GWU, including the acquisition of our new Nuclear Detector Laboratory at our new Virginia Campus; and Sec. V is a list of our publications, proposals, and other reports. copies of those on medium-energy nuclear physics are reproduced in the Appendix

Linac design study for an intense neutron-source driver

International Nuclear Information System (INIS)

Lynch, M.T.; Browman, A.; DeHaven, R.; Jameson, R.; Jason, A.; Neuschaefer, G.; Tallerico, P.; Regan, A.

1993-01-01

The 1-MW spallation-neutron source under design study at Los Alamos is driven by a linac-compressor-ring scheme that utilizes a large portion of the existing Los Alamos Meson Physics Facility (LAMPF) linac, as well as the facility infrastructure. The project is referred to as the National Center for Neutron Research (NCNR). A second phase of the proposal will upgrade the driver power to 5 MW. A description of the 1-MW scheme is given in this paper. In addition, the upgrade path to the substantial increase of beam power required for the 5 MW scenario is discussed

Physics Division Argonne National Laboratory description of the programs and facilities.

Energy Technology Data Exchange (ETDEWEB)

Thayer, K.J. [ed.

1999-05-24

The ANL Physics Division traces its roots to nuclear physics research at the University of Chicago around the time of the second world war. Following the move from the University of Chicago out to the present Argonne site and the formation of Argonne National Laboratory: the Physics Division has had a tradition of research into fundamental aspects of nuclear and atomic physics. Initially, the emphasis was on areas such as neutron physics, mass spectrometry, and theoretical studies of the nuclear shell model. Maria Goeppert Maier was an employee in the Physics Division during the time she did her Nobel-Prize-winning work on the nuclear shell model. These interests diversified and at the present time the research addresses a wide range of current problems in nuclear and atomic physics. The major emphasis of the current experimental nuclear physics research is in heavy-ion physics, centered around the ATLAS facility (Argonne Tandem-Linac Accelerator System) with its new injector providing intense, energetic ion beams over the fill mass range up to uranium. ATLAS is a designated National User Facility and is based on superconducting radio-frequency technology developed in the Physics Division. A small program continues in accelerator development. In addition, the Division has a strong program in medium-energy nuclear physics carried out at a variety of major national and international facilities. The nuclear theory research in the Division spans a wide range of interests including nuclear dynamics with subnucleonic degrees of freedom, dynamics of many-nucleon systems, nuclear structure, and heavy-ion interactions. This research makes contact with experimental research programs in intermediate-energy and heavy-ion physics, both within the Division and on the national and international scale. The Physics Division traditionally has strong connections with the nation's universities. We have many visiting faculty members and we encourage students to participate in our

Research in experimental nuclear physics. Progress report, 1 April 1984-31 March 1985

International Nuclear Information System (INIS)

1984-11-01

This report summarizes the work carried out by personnel from the University of Texas at Austin at the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF) during the calendar year 1984. The research activities involved experiments done with the Energetic Pion Channel and Spectrometer (EPICS), the High Resolution Spectrometer (HRS), and some work has been done at Argonne National Laboratory and Kernforschungsanlage, Juelich, West Germany. A brief overview of work supported by this contract, a list of abstracts of papers reported at scientific meetings, and a list of published papers and preprints are given. These papers summarize experiments undertaken this year and in the proceeding year and indicate the work accomplished by the participants in this program of medium energy nuclear physics research. Studies include parameters of the neutron density distributions for the Ca isotopes for the analysis of π +- elastic scattering, the excitation of ΔS = 1 transitions via pion inelastic scattering in light nuclei, 12 C(π + ,π + ') inelastic scattering at very small angles, pion-induced double charge exchange reaction, and evidence for the population of a low-spin Δ-hole state at 248 MeV was found in 12 C via 13 C(p,d) 12 C* at 800 MeV

Design and evaluation of physical protection systems of nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

An, Jin Soo; Lee, Hyun Chul; Hwang, In Koo; Kwack, Eun Ho; Choi, Yung Myung

2001-06-01

Nuclear material and safety equipment of nuclear facilities are required to be protected against any kind of theft or sabotage. Physical protection is one of the measures to prevent such illegally potential threats for public security. It should cover all the cases of use, storage, and transportation of nuclear material. A physical protection system of a facility consists of exterior intrusion sensors, interior intrusion sensors, an alarm assessment and communication system, entry control systems, access delay equipment, etc. The design of an effective physical protection system requires a comprehensive approach in which the designers define the objective of the system, establish an initial design, and evaluate the proposed design. The evaluation results are used to determine whether or not the initial design should be modified and improved. Some modelling techniques are commonly used to analyse and evaluate the performance of a physical protection system. Korea Atomic Energy Research Institute(KAERI) has developed a prototype of software as a part of a full computer model for effectiveness evaluation for physical protection systems. The input data elements for the prototype, contain the type of adversary, tactics, protection equipment, and the attributes of each protection component. This report contains the functional and structural requirements defined in the development of the evaluation computer model.

Physical protection of facilities and special nuclear materials in france

International Nuclear Information System (INIS)

Jeanpierre, G.

1980-01-01

Physical protection of nuclear facilities and special nuclear materials is subject in France to a national governmental regulation which provides for the basic principles to be taken into account and the minimal level of protection deemed necessary. But the responsibility of implementation is left to the facility management and the resulting decentralization allows for maximum efficiency. All safeguards measures comply with the commitments taken at the international level by the French government

Measurement of observables in the pion-nucleon system and investigation of charge symmetry in 3He and 3H. Progress report, March 1, 1985-February 28, 1986

International Nuclear Information System (INIS)

Sadler, M.E.

1986-03-01

Progress is reported for the past year in pion scattering programs. The measurements include: (1) a complete set of observables in the pion-nucleon system in the momentum interval 400 to 700 MeV/c, (2) differential cross sections at low energy for pion-nucleon charge exchange, and (3) elastic and inelastic scattering of π +- on 3 H and 3 He. The experiments are conducted at the Clinton P. Anderson Meson Physics Facility at Los Alamos (LAMPF)

Scruncher phase and amplitude control

International Nuclear Information System (INIS)

DeHaven, R.A.; Morris, C.L.; Johnson, R.; Davis, J.; O'Donnell, J.M.

1992-01-01

The analog controller for phase and amplitude control of a 402.5 MHz super conducting cavity is described in this paper. The cavity is a single cell with niobium explosively bonded to a copper cavity. It is used as an energy compressor for pions at the Clinton P. Anderson Meson Physics Facility (LAMPF). The controller maintains cavity frequency to within 4 degrees in phase of the LAMPF beam frequency. Field amplitude is maintained to within 2 percent. This control is accomplished at critical coupling (Q load of 1 x 10 9 ) with the use of only a 30 watt rf amplifier for accelerating fields of 6 MV/m. The design includes the use of piezoelectric crystals for fast resonance control. Three types of control, self excited, VCO, and a reference frequency driven, were tried on this cavity and we present a comparison of their performance. (Author) 4 figs., ref

SCRUNCHER phase and amplitude control

International Nuclear Information System (INIS)

DeHaven, R.A.; Morris, C.L.; Johnson, R.; Davis, J.; O'Donnell, J.M.

1992-01-01

The analog controller for phase and amplitude control of a 402.5 MHz super conducting cavity is described in this paper. The cavity is a single cell with niobium explosively bonded to a copper cavity. It is used as an energy compressor for pions at the Clinton P. Anderson Meson Physics Facility (LAMPF). The controller maintains cavity frequency to within 4 degrees in phase of the LAMPF beam frequency. Field amplitude is maintained to within 2 percent. This control is accomplished at critical coupling (Q loaded of 1 x 10 9 ) with the use of only a 30 watt rf amplifier for accelerating fields of 6 MV/m. The design includes the use of piezoelectric crystals for fast resonance control. Three types of control, self excited VCO, and a reference frequency driven, were tried on this cavity and we present a comparison of their performance

Particle accelerator control and data acquisition in the context of VAX/VMS

International Nuclear Information System (INIS)

Schaller, S.C.; Corley, J.K.

1983-01-01

The Los Alamos Meson Physics Facility (LAMPF) Control System monitors and controls a linear accelerator through more than 10,000 widely disparate I/O devices. The heart of the Control System software is the Data System, which provides a uniform application program interface based on symbolic device names. In many ways the Data System parallels the VAX/VMS Record Management Services (RMS) in its needs for asynchronous operations, protection, and locks for multiprocess interactions. Since the accelerator control hardware is continually changing, it is important that privileged code be kept to a minimum or be testable in a non-privileged environment. This paper describes the LAMPF Data System design including the use of VAX/VMS user written system services (both kernel and supervisor mode), a user supplied image rundown routine, the VAX/VMS lock manager, and a large (3.5 Mbyte) protected global section

Non-European facilities for elementary particle physics research

International Nuclear Information System (INIS)

Mann, A.K.

1983-01-01

The facilities we now employ in high energy physics cover a broad spectrum of particle energies and intensities and provide therefore a multiplicity of probes with which to study the behavior of elementary particles. In general, the goal has been to achieve ever higher particle energies and intensities, with emphasis on energy, and to develop more versatile and more sensitive detectors with which to study the resultant particle-particle interactions. Most energy regimes that have been explored have yielded new, fundamental information which often becomes clearer and more easily developed when particle energies are further increased. In this talk I shall try to delineate the nature of those facilities in Canada, Japan and the U.S.A. It is useful, I believe, to begin with a brief discussion of the funding and management of facilities in those countries and a short summary of recent history. The main body of the talk concentrates on the present, planned and contemplated facilities of the major non-European accelerator laboratories, and address briefly the status of accelerator development. The concluding section will summarize the salient features of the discussion. (author)

Status of the Tau-Charm Facility and highlights of its physics program

International Nuclear Information System (INIS)

Schindler, R.H.

1990-02-01

In this paper I will first discuss the history and current status of the Tau-Charm Facility. I will then focus on the unique aspects of the heavy meson and tau physics program of such a facility, which motivates its construction and operation in the mid-1090's

Beta Beams: an accelerator based facility to explore Neutrino oscillation physics

CERN Document Server

Wildner, E; Hansen, C; De Melo Mendonca, T; Stora, T; Payet, J; Chance, A; Zorin, V; Izotov, I; Rasin, S; Sidorov, A; Skalyga, V; De Angelis, G; Prete, G; Cinausero, M; Kravchuk, VL; Gramegna, F; Marchi, T; Collazuol, G; De Rosa, G; Delbar, T; Loiselet, M; Keutgen, T; Mitrofanov, S; Lamy, T; Latrasse, L; Marie-Jeanne, M; Sortais, P; Thuillier, T; Debray, F; Trophime, C; Hass, M; Hirsh, T; Berkovits, D; Stahl, A

2011-01-01

The discovery that the neutrino changes flavor as it travels through space has implications for the Standard Model of particle physics (SM)[1]. To know the contribution of neutrinos to the SM, needs precise measurements of the parameters governing the neutrino oscillations. This will require a high intensity beam-based neutrino oscillation facility. The EURONu Design Study will review three currently accepted methods of realizing this facility (the so-called Super-Beams, Beta Beams and Neutrino Factories) and perform a cost assessment that, coupled with the physics performance, will give means to the European research authorities to make a decision on the layout and construction of the future European neutrino oscillation facility. ”Beta Beams” produce collimated pure electron neutrino and antineutrino beams by accelerating beta active ions to high energies and letting them decay in a race-track shaped storage ring. EURONu Beta Beams are based on CERNs infrastructure and the fact that some of the already ...

Pion- and proton-nucleus interactions at intermediate energy

International Nuclear Information System (INIS)

Dehnhard, D.

1992-12-01

We report on scattering and reaction experiments on light nuclei using the π-meson and proton beams from the Los Alamos Meson Physics Facility (LAMPF) and the Indiana University Cyclotron Facility (IUCF). Differential cross sections, cross section asymmetries, and angular correlation functions have been measured in order to test models of the reaction mechanism and of nuclear structure. At LAMPF we have measured asymmetries for pion scattering from polarized 13 C which are uniquely sensitive to the isoscalar spin density. In order to determine details of the reaction mechanism, we have obtained approval for a scattering experiment on polarized 3 He for which the nuclear structure is very well known. We have completed data taking for two studies of elastic scattering of π + from 6 Li and l3 C. The detailed differential cross sections from these experiments will be used to constrain theoretical analyses of previous polarization experiments done at the Pierre-Scherrer-Institute (PSI) and at LAMPF. We have analyzed π-triton coincidence events from the 4 He(π,π' t)p reaction and have found evidence for direct triton knockout from 4 He. We have extended these angular correlation measurements to higher energies and to 2 H and 3 He targets. At IUCF we have performed the first 4 He(p,n) experiment at intermediate energies, T p = 100, 147, and 200 MeV, in a search for previously reported narrow states in 4 Li of widths of ∼ 1 MeV. Within the statistics of the data we have found no evidence for such narrow structures

Informal proposal for an Atomic Physics Facility at the National Synchrotron Light Source

Energy Technology Data Exchange (ETDEWEB)

Jones, K.W.; Johnson, B.M.; Meron, M.

1986-01-01

An Atomic Physics Facility (APF) for experiments that will use radiation from a superconducting wiggler on the NSLS X-13 port is described. The scientific justification for the APF is given and the elements of the facility are discussed. It is shown that it will be possible to conduct a uniquely varied set of experiments that can probe most aspects of atomic physics. A major component of the proposal is a heavy-ion storage ring capable of containing ions with energies of about 10 MeV/nucleon. The ring can be filled with heavy ions produced at the BNL MP Tandem Laboratory or from independent ion-source systems. A preliminary cost estimate for the facility is presented.

Current Experiments in Particle Physics (September 1996)

Energy Technology Data Exchange (ETDEWEB)

Galic, H.; Lehar, F.; Klyukhin, V.I.; Ryabov, Yu.G.; Bilak, S.V.; Illarionova, N.S.; Khachaturov, B.A.; Strokovsky, E.A.; Hoffman, C.M.; Kettle, P.-R.; Olin, A.; Armstrong, F.E.

1996-09-01

This report contains summaries of current and recent experiments in Particle Physics. Included are experiments at BEPC (Beijing), BNL, CEBAF, CERN, CESR, DESY, FNAL, Frascati, ITEP (Moscow), JINR (Dubna), KEK, LAMPF, Novosibirsk, PNPI (St. Petersburg), PSI, Saclay, Serpukhov, SLAC, and TRIUMF, and also several proton decay and solar neutrino experiments. Excluded are experiments that finished taking data before 1991. Instructions are given for the World Wide Web (WWW) searching of the computer database (maintained under the SLAC-SPIRES system) that contains the summaries. This report contains full summaries of 180 approved current and recent experiments in elementary particle physics. The focus of the report is on selected experiments which directly contribute to our better understanding of elementary particles and their properties such as masses, widths or lifetimes, and branching fractions.

Proceedings of the workshop on program options in intermediate-energy physics. Volume 1. Summary and panel reports

Energy Technology Data Exchange (ETDEWEB)

Allred, J.C.; Talley, B. (comps.)

1980-05-01

A Workshop on Program Options in Intermediate-Energy Physics sponsored by the US Department of Energy was held at Los Alamos Scientific Laboratory, August 20 to 31, 1979. The scope of the workshop included all laboratories in intermediate-energy physics, worldwide, and all of these sent representatives to the workshop. The workshop addressed itself to the critical questions on nuclear and particle physics and how they can best be investigated by intermediate-energy accelerators. Among the questions that the workshop members considered were: (1) what are the important physics topics which might be understood through research on these accelerators in the next 10 years. These topics include, but are not restricted to, fundamental interactions and symmetries in particle physics, and nuclear modes of motion, structure, and reaction mechanisms; (2) what experiments should be undertaken to carry out the program. What are the kinematical conditions, accuracies, resolutions, and other parameters required to obtain the desired knowledge; (3) which accelerators are best suited for each experiment. What work at other laboratories (low-, intermediate-, or high-energy) could be undertaken to complement and/or supplement the proposed LAMPF program; and (4) what new facility capabilities should be explored for the long-term future. The workshop was divided into small panels in order to promote effective interchange of ideas. After reports to other panels and plenary sessions, the panelists prepared reports stating the results of their deliberations. These reports comprise the principal part of Volume I.

Proceedings of the workshop on program options in intermediate-energy physics. Volume 1. Summary and panel reports

International Nuclear Information System (INIS)

Allred, J.C.; Talley, B.

1980-05-01

A Workshop on Program Options in Intermediate-Energy Physics sponsored by the US Department of Energy was held at Los Alamos Scientific Laboratory, August 20 to 31, 1979. The scope of the workshop included all laboratories in intermediate-energy physics, worldwide, and all of these sent representatives to the workshop. The workshop addressed itself to the critical questions on nuclear and particle physics and how they can best be investigated by intermediate-energy accelerators. Among the questions that the workshop members considered were: (1) what are the important physics topics which might be understood through research on these accelerators in the next 10 years. These topics include, but are not restricted to, fundamental interactions and symmetries in particle physics, and nuclear modes of motion, structure, and reaction mechanisms; (2) what experiments should be undertaken to carry out the program. What are the kinematical conditions, accuracies, resolutions, and other parameters required to obtain the desired knowledge; (3) which accelerators are best suited for each experiment. What work at other laboratories (low-, intermediate-, or high-energy) could be undertaken to complement and/or supplement the proposed LAMPF program; and (4) what new facility capabilities should be explored for the long-term future. The workshop was divided into small panels in order to promote effective interchange of ideas. After reports to other panels and plenary sessions, the panelists prepared reports stating the results of their deliberations. These reports comprise the principal part of Volume I

Parametric studies of target/moderator configurations for the Weapons Neutron Research (WNR) facility

International Nuclear Information System (INIS)

Russell, G.J.; Seeger, P.A.; Fluharty, R.G.

1977-03-01

Parametric studies, using continuous-energy Monte Carlo codes, were done to optimize the neutronics of the Weapons Neutron Research (WNR) target and three possible target/moderator configurations: slab target/slab moderators, cylindrical target/cylindrical moderator, and cylindrical target/double-wing moderators. The energy range was 0.5 eV to 800 MeV. A general figure-of-merit (FOM) approach was used. The WNR facility performance can be doubled or tripled by optimizing the target and target/moderator configurations; this approach is more efficient than increasing the Clinton P. Anderson Meson Physics Facility (LAMPF) accelerator power by an equivalent factor. A bare target should be used for neutron energies above approximately 100 keV. The FOM for the slab target/slab moderator configuration is the best by a factor of at least 2 to 3 below approximately 1 keV. The total neutron leakage from 0.5 eV to 100 keV through a 100- by 100-mm area centered at the peak leakage is largest for the slab moderator, exceeding that of the cylindrical moderator and double-wing moderator by factors of 1.7 and 3.4, respectively. The neutron leakage at 1 eV from one 300- by 150-mm surface of a slab moderator is 1.5 times larger than that from one 155- by 150-mm surface of a cylindrical moderator. When compared with the 1-eV leakage from two 100- by 150-mm surfaces of a double-wing moderator, that from the slab moderator is 3.4 times larger. 107 figures, 13 tables

Search for the C-noninvariant decay π0 → 3γ

International Nuclear Information System (INIS)

McDonough, J.

1987-01-01

A new experimental search for the C-violating decay π 0 → 3γ has been undertaken using the Crystal Box detector at the Clinton P. Anderson Meson Physics Facility (LAMPF). The observation of this decay mode would indicate that the electromagnetic interaction of hadrons is not invariant under charge conjugation. No 3γ events in excess of background were observed. The 90% confidence level upper limit for the 3γ branching ratio is lowered to 3.1 x 10 -8

Naturally occurring workplace facilities to increase the leisure time physical activity of workers: A propensity-score weighted population study.

Science.gov (United States)

Biswas, Aviroop; Smith, Peter M; Gignac, Monique A M

2018-06-01

The benefit of providing access to physical activity facilities at or near work to support the leisure time physical activity (LTPA) of workers is uncertain. We examined the association between access to physical activity facilities at or near work and the LTPA of workers after adjusting for a range of individual and occupational characteristics. Data was obtained from 60,650 respondents to the 2007-2008 Canadian Community Health Survey. Participants were employed adults ≥18 years of age who had no long-term health condition which reduced their participation in physical activity. Latent class analysis determined naturally occurring combinations of physical activity facilities at or near work. Each combination was balanced by 19 individual and occupational covariate characteristics using inverse probability of treatment weights derived from propensity scores. The association between combinations of physical activity facilities at or near work on LTPA level was estimated by multinomial logistic regression. Five different combinations of physical activity facilities were available to respondents at or near work. Data were analyzed in 2017. All possible physical facilities increased the likelihood for LTPA (OR, 2.08, 95% CI, 1.03-4.20) and other combinations were also positively associated. Respondents with no physical activity facilities were characterized as having a low education, low income, high physically demanding work, poor health and mental health, non-white racial background, and being an immigrant. Access to supportive workplace environments can help workers be physically active. Future research should assess a range of personal, social and environmental factors that may be driving this relationship.

Medium-energy physics program. Progress report, February 1--April 30, 1977

International Nuclear Information System (INIS)

van Dyck, O.B.; Dunn, E.D.

1977-09-01

Operations and research programs at the LAMPF Linac are reported for February, March, and April, 1977. The contents include: (1) a summary and a list of recent publications; (2) accelerator operations; (3) injector systems; (4) accelerator systems development; (5) accelerator support; (6) engineering support; (7) electronic instrumentation and computer systems; (8) beam line development; (9) experimental areas; (10) large-spectrometer systems; (11) practical applications of LAMPF; (12) linac technology; (13) nuclear chemistry; (14) research; and (15) management

Physical protection of nuclear materials and facilities in CEA

International Nuclear Information System (INIS)

Garnier-Gratia, M.-H.; Jorda, A.

2001-01-01

Full text: CEA (Commissariat a l'Energie Atomique), as nuclear operator, is responsible for the control and protection of their nuclear materials. Inside CEA, DCS (Central Security Division) is in charge of the security matters, DCS defines the CEA strategy in this field, especially in physical protection. The paper will present the physical protection strategy of CEA. DCS defines the rules and methods; the operators have to apply in order to fulfill the security objectives of CEA. CEA has to provide the regulatory authority with documents proving that it is in accordance with the requirements of the 25th July 1980 law and 12th May 1981 decree. It has to implement all the necessary means in order to achieve the results requested by the regulatory authority. All these arrangements are described in the 'license and control file'. This file should specify the facility safeguards and physical protection system. Accounting measures are also described. In this file, the petitioner has to justify its capacity for holding nuclear materials and for exercising authorized activities on them. So the organization and the installed means have to be described in this authorization file. For physical protection, containment, surveillance and physical protection measures are presented: Containment measures must prevent the unauthorized or unjustified movements of nuclear material in the framework of the authorized activities; Surveillance measures must guarantee the integrity of the containment, check that no material is exiting by an abnormal channel; Physical protection measures for the materials, the premises and the facilities are intended to protect them against malevolent actions by means of security systems. The Central Security Division has established guidelines to provide guidance to the nuclear materials holders in writing such files. Each holding unit has to establish a 'license and control file' and each CEA site establishes a 'site license and control file

Naturally occurring workplace facilities to increase the leisure time physical activity of workers: A propensity-score weighted population study

Directory of Open Access Journals (Sweden)

Aviroop Biswas

2018-06-01

Full Text Available The benefit of providing access to physical activity facilities at or near work to support the leisure time physical activity (LTPA of workers is uncertain. We examined the association between access to physical activity facilities at or near work and the LTPA of workers after adjusting for a range of individual and occupational characteristics. Data was obtained from 60,650 respondents to the 2007–2008 Canadian Community Health Survey. Participants were employed adults ≥18 years of age who had no long-term health condition which reduced their participation in physical activity. Latent class analysis determined naturally occurring combinations of physical activity facilities at or near work. Each combination was balanced by 19 individual and occupational covariate characteristics using inverse probability of treatment weights derived from propensity scores. The association between combinations of physical activity facilities at or near work on LTPA level was estimated by multinomial logistic regression. Five different combinations of physical activity facilities were available to respondents at or near work. Data were analyzed in 2017. All possible physical facilities increased the likelihood for LTPA (OR, 2.08, 95% CI, 1.03–4.20 and other combinations were also positively associated. Respondents with no physical activity facilities were characterized as having a low education, low income, high physically demanding work, poor health and mental health, non-white racial background, and being an immigrant. Access to supportive workplace environments can help workers be physically active. Future research should assess a range of personal, social and environmental factors that may be driving this relationship. Keywords: Physical activity, Workplace, Built environment, Health promotion, Exercise

methodological and technical aspects to be considered in the location of physical recreational sports facilities

Directory of Open Access Journals (Sweden)

Jesús I. Benítez Llanes

2012-03-01

Full Text Available Sometimes we wonder. Why practitioners of recreational physical activities do not make systematic use of a particular sports facility ?, Why some sports facility remains almost always empty? Why it is continued unnecessarily reversed large sums of material resources for maintenance? For the simple reason that sports facilities were from the beginning that were not well conceived and designed architecturally, where among other things, not sporting habits and population size of the place properly examined. Similarly, we have witnessed criteria issued regarding the performance of a specific sports field, far from contributing to the extension and improvement of the practice of recreational physical and sports activities in its various manifestations, its null or poor continuous maintenance contributing negatively to limit the sporting life and lacerate mental and physical welfare of the inhabitants of the environment. Justifications that led the author of this research to the development of methodological technical aspects regarding the location of recreational physical sports infrastructure, content which also form part of the subject and / or curricular unit "Spaces and Sports Facilities" currently teaches future professionals and managers of Physical Culture for the last two academic years at the University of the Sciences of Physical Culture and Sport Nancy Uranga Romagoza in Pinar del Río Cuba and the Iberoamerican University of Sport in Venezuela.

Security Culture in Physical Protection of Nuclear Material and Facility

International Nuclear Information System (INIS)

Susyanta-Widyatmaka; Koraag, Venuesiana-Dewi; Taswanda-Taryo

2005-01-01

In nuclear related field, there are three different cultures: safety, safeguards and security culture. Safety culture has established mostly in nuclear industries, meanwhile safeguards and security culture are relatively new and still developing. The latter is intended to improve the physical protection of material and nuclear facility. This paper describes concept, properties and factors affecting security culture and interactions among these cultures. The analysis indicates that anybody involving in nuclear material and facility should have strong commitment and awareness of such culture to establish it. It is concluded that the assessment of security culture outlined in this paper is still preliminary for developing and conduction rigorous security culture implemented in a much more complex facility such as nuclear power plant

Handbook on interdisciplinary use of European nuclear physics facilities

International Nuclear Information System (INIS)

2004-01-01

This handbook is intended to collect together, in an accessible way, the most pertinent information which might be needed by anyone contemplating the use of nuclear physics accelerators for research in other disciplines, or for industrial, biomedical, solid-state or other applications. Information for the publication was supplied by each laboratory represented here, and this was edited and supplemented where it was thought necessary, by additional material, often derived from the facilities' web-sites. The reader will find for each facility a technical description concerning the accelerator itself and its experimental equipment, followed by a 'what can be made there' section. 'at a glance' page contains a summary of contact names and addresses, transport, access and accommodation offered that will be of a great use for prospective user. 26 facilities in 12 European countries (Belgium, Finland, France, Germany, Italy, Norway, Poland, Portugal, Spain, Sweden, Switzerland and The Netherlands) are presented

Handbook on interdisciplinary use of European nuclear physics facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This handbook is intended to collect together, in an accessible way, the most pertinent information which might be needed by anyone contemplating the use of nuclear physics accelerators for research in other disciplines, or for industrial, biomedical, solid-state or other applications. Information for the publication was supplied by each laboratory represented here, and this was edited and supplemented where it was thought necessary, by additional material, often derived from the facilities' web-sites. The reader will find for each facility a technical description concerning the accelerator itself and its experimental equipment, followed by a 'what can be made there' section. 'at a glance' page contains a summary of contact names and addresses, transport, access and accommodation offered that will be of a great use for prospective user. 26 facilities in 12 European countries (Belgium, Finland, France, Germany, Italy, Norway, Poland, Portugal, Spain, Sweden, Switzerland and The Netherlands) are presented.

Data bank for nuclear-physical studies in educational facilities

International Nuclear Information System (INIS)

Boboshin, I.N.; Varlamov, V.V.; Ishkhanov, B.S.; Kapitonov, I.M.; Lenskaya, N.A.; Surgutanov, V.V.; Khoronenko, A.A.; Chernyaev, A.P.

1986-01-01

Purposes and tasks of nuclear data Centers of the USSR Ministry of Education are discussed in short. Files of both bibliographic and factographic nuclear-physical data widely used with the Centres to provide the state organizations and scientists, first of all educational facilities, with nuclear data to increase effectiveness of fundamental and applied investigations and educational process are described

Physics at high luminosity muon colliders and a facility overview

International Nuclear Information System (INIS)

Parsa, Z.

2001-01-01

Physics potentials at future colliders including high luminosity μ + μ - colliders are discussed. Luminosity requirement, estimates for Muon collider energies of interest (0.1 TeV to 100 TeV) are calculated. Schematics and an overview of Muon Collider facility concept are also included

Integration of radiation and physical safety in large radiator facilities

International Nuclear Information System (INIS)

Lima, P.P.M.; Benedito, A.M.; Lima, C.M.A.; Silva, F.C.A. da

2017-01-01

Growing international concern about radioactive sources after the Sept. 11, 2001 event has led to a strengthening of physical safety. There is evidence that the illicit use of radioactive sources is a real possibility and may result in harmful radiological consequences for the population and the environment. In Brazil there are about 2000 medical, industrial and research facilities with radioactive sources, of which 400 are Category 1 and 2 classified by the - International Atomic Energy Agency - AIEA, where large irradiators occupy a prominent position due to the very high cobalt-60 activities. The radiological safety is well established in these facilities, due to the intense work of the authorities in the Country. In the paper the main aspects on radiological and physical safety applied in the large radiators are presented, in order to integrate both concepts for the benefit of the safety as a whole. The research showed that the items related to radiation safety are well defined, for example, the tests on the access control devices to the irradiation room. On the other hand, items related to physical security, such as effective control of access to the company, use of safety cameras throughout the company, are not yet fully incorporated. Integration of radiation and physical safety is fundamental for total safety. The elaboration of a Brazilian regulation on the subject is of extreme importance

Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5): Recommendations

International Nuclear Information System (INIS)

2011-01-01

This publication, Revision 5 of Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225), is intended to provide guidance to States and their competent authorities on how to develop or enhance, implement and maintain a physical protection regime for nuclear material and nuclear facilities, through the establishment or improvement of their capabilities to implement legislative and regulatory programmes. The recommendations presented in this publication reflect a broad consensus among IAEA Member States on the requirements which should be met for the physical protection of nuclear materials and nuclear facilities.

Physics at a future Neutrino Factory and super-beam facility

NARCIS (Netherlands)

Bandyopadhyay, A.; Choubey, S.; Gandhi, R.; Goswami, S.; Roberts, B. L.; Bouchez, J.; Antoniadis, I.; Ellis, J.; Giudice, G. F.; Schwetz, T.; Umasankar, S.; Karagiorgi, G.; Aguilar-Arevalo, A.; Conrad, J. M.; Shaevitz, M. H.; Pascoli, S.; Geer, S.; Campagne, J. E.; Rolinec, M.; Blondel, A.; Campanelli, M.; Kopp, J.; Lindner, M.; Peltoniemi, J.; Dornan, P. J.; Long, K.; Matsushita, T.; Rogers, C.; Uchida, Y.; Dracos, M.; Whisnant, K.; Casper, D.; Chen, Mu-Chun; Popov, B.; Aysto, J.; Marfatia, D.; Okada, Y.; Sugiyama, H.; Jungmann, K.; Lesgourgues, J.; Zisman, M.; Tortola, M. A.; Friedland, A.; Davidson, S.; Antusch, S.; Biggio, C.; Donini, A.; Fernandez-Martinez, E.; Gavela, B.; Maltoni, M.

2009-01-01

The conclusions of the Physics Working Group of the International Scoping Study of a future Neutrino Factory and super-beam facility (the ISS) are presented. The ISS was carried out by the international community between NuFact05, (the 7th International Workshop on Neutrino Factories and

Centralization and Decentralization of Schools' Physical Facilities Management in Nigeria

Science.gov (United States)

Ikoya, Peter O.

2008-01-01

Purpose: This research aims to examine the difference in the availability, adequacy and functionality of physical facilities in centralized and decentralized schools districts, with a view to making appropriate recommendations to stakeholders on the reform programmes in the Nigerian education sector. Design/methodology/approach: Principals,…

Handbook on interdisciplinary use of European nuclear physics facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

This handbook is intended to collect together, in an accessible way, the most pertinent information which might be needed by anyone contemplating the use of nuclear physics accelerators for research in other disciplines, or for industrial, biomedical, solid-state or other applications. Information for the publication was supplied by each laboratory represented here, and this was edited and supplemented where it was thought necessary, by additional material, often derived from the facilities' web-sites. The reader will find for each facility a technical description concerning the accelerator itself and its experimental equipment, followed by a 'what can be made there' section. 'at a glance' page contains a summary of contact names and addresses, transport, access and accommodation offered that will be of a great use for prospective user. 26 facilities in 12 European countries (Belgium, Finland, France, Germany, Italy, Norway, Poland, Portugal, Spain, Sweden, Switzerland and The Netherlands) are presented.

User's guide for evaluating physical security capabilities of nuclear facilities by the EASI method

International Nuclear Information System (INIS)

Bennett, H.A.

1977-06-01

This handbook is a guide for evaluating physical security of nuclear facilities using the ''Estimate of Adversary Sequence Interruption (EASI)'' method and a hand-held programmable calculator. The handbook is intended for use by personnel at facilities where special nuclear materials are used, processed, or stored. It may also be used as a design aid for such facilities by potential licensees

Physical Sciences Facility Air Emission Control Equivalency Evaluation

Energy Technology Data Exchange (ETDEWEB)

Brown, David M.; Belew, Shan T.

2008-10-17

This document presents the adequacy evaluation for the application of technology standards during design, fabrication, installation and testing of radioactive air exhaust systems at the Physical Sciences Facility (PSF), located on the Horn Rapids Triangle north of the Pacific Northwest National Laboratory (PNNL) complex. The analysis specifically covers the exhaust portion of the heating, ventilation and air conditioning (HVAC) systems associated with emission units EP-3410-01-S, EP-3420-01-S and EP 3430-01-S.

Demountable toroidal fusion core facility for physics optimization and fusion engineering

International Nuclear Information System (INIS)

Bogart, S.L.; Wagner, C.E.; Krall, N.A.; Dalessandro, J.A.; Weggel, C.F.; Lund, K.O.; Sedehi, S.

1986-01-01

Following a successful compact ignition tokamak (CIT) experiment, a fusion facility will be required for physics optimization (POF) and fusion engineering research (FERF). The POF will address issues such as high-beta operation, current drive, impurity control, and will test geometric and configurational variations such as the spherical torus or the reversed-field pinch (RFP). The FERF will be designed to accumulate rapidly a large neutron dose in prototypical fusion subsystems exposed to radiation. Both facilities will require low-cost replacement cores and rapid replacement times. The Demountable Toroidal Fusion Core (DTFC) facility is designed to fulfill these requirements. It would be a cost-effective stepping stone between the CIT and a demonstration fusion reactor

Vulnerability Analysis of Physical Protection System at Hypothetical Facility

International Nuclear Information System (INIS)

Jung, Won Moog; Lee, Ho Jin; Yu, Dong Han; Min, Gyung Sik

2006-01-01

Since the 9/11 event in the U.S.A, International terror possibilities has been increasing for nuclear facilities including nuclear power plants(NPPs). It is necessary to evaluate the performance of an existing physical protection system(PPS) at nuclear facilities based on such malevolent acts. A PPS is a complex configuration of detection, delay, and response elements. Detection, delay, and response elements are all important to the analysis and evaluation of a PPS and its effectiveness. Methods are available to analyze a PPS and evaluate its effectiveness. Sandia National Laboratory(SNL) in the U.S.A was developed a System Analysis of Vulnerability to Intrusion (SAVI) computer code for evaluating the effectiveness of PPS against outsider threats. This study presents the vulnerability analysis of the PPS at hypothetical facility using SAVI code that the basic input parameters are from PPS of Hanaro Research Reactor at Korea Atomic Energy Research Institution. It is understand that PPS of research reactor and critical assemblies are deficient that that of NPP and nuclear materials of RRCAS are compact to transport For analysis, first, the site-specific Adversary Sequence Diagrams(ASDs) of the PPS is constructed. It helps to understand the functions of the existing PPS composed of physical areas and Protection Elements(PEs). Then, the most vulnerable path of an ASD as a measure of effectiveness is determined. The results in the analysis can used to suggest the possible PPS upgrades to the most vulnerable paths for the system like research reactor

Plans for LAMPF II

International Nuclear Information System (INIS)

Thiessen, H.A.

1982-01-01

A high-intensity 16- to 32-GeV proton accelerator is proposed. Several major areas of physics would benefit, including muons, neutrino physics, rare kaon decays, hypernuclei, and antiproton physics. The possibilities for constructing such a machine on the Los Alamos site and a preliminary cost estimate are discussed

Health physics and quality control management of a cyclotron-based PET facility

International Nuclear Information System (INIS)

Jerabek, P.A.

1995-01-01

This paper provides an overview of the operation and management of a Positron Emission Tomography (PET) facility at the University of Texas. The facility components are discussed from an operations perspective with an emphasis on devices, and on practices and procedures which are implemented to ensure that personnel exposures are as low as reasonably achievable. The cyclotron-based PET facility uses in-house production of PET radioisotopes for preparation of radiopharmaceuticals. A combination of specially designed cyclotron equipped devices, radiopharmaceutical preparation devices, and shielded devices along with health physics practices have helped to make PET operations become routine

Space Physics Data Facility Web Services

Science.gov (United States)

Candey, Robert M.; Harris, Bernard T.; Chimiak, Reine A.

2005-01-01

The Space Physics Data Facility (SPDF) Web services provides a distributed programming interface to a portion of the SPDF software. (A general description of Web services is available at http://www.w3.org/ and in many current software-engineering texts and articles focused on distributed programming.) The SPDF Web services distributed programming interface enables additional collaboration and integration of the SPDF software system with other software systems, in furtherance of the SPDF mission to lead collaborative efforts in the collection and utilization of space physics data and mathematical models. This programming interface conforms to all applicable Web services specifications of the World Wide Web Consortium. The interface is specified by a Web Services Description Language (WSDL) file. The SPDF Web services software consists of the following components: 1) A server program for implementation of the Web services; and 2) A software developer s kit that consists of a WSDL file, a less formal description of the interface, a Java class library (which further eases development of Java-based client software), and Java source code for an example client program that illustrates the use of the interface.

Intervention to promote physical health in staff within mental health facilities and the impact on patients' physical health

DEFF Research Database (Denmark)

Hjorth, Peter; Davidsen, Annette S; Kilian, Reinhold

2016-01-01

of an intervention programme for improving physical health in staff working in longtermpsychiatric treatment facilities. Furthermore, the paper measured the association betweenstaff’s changes in physical health and the patients’ changes in physical health. Methods: Thestudy was a cluster randomized controlled 12......-month intervention study, and the interventionwas active awareness on physical health. Results: In the intervention group the staff reducedtheir waist circumference by 2.3 cm (95% CI: 0.3–4.4) when controlling for gender, age andcigarette consumption. In the control group, the staff changed their waist...... blood pressure was seen. Indications that staff acted aspositive role models for the patients’ physical health were seen....

Microscope-Based Fluid Physics Experiments in the Fluids and Combustion Facility on ISS

Science.gov (United States)

Doherty, Michael P.; Motil, Susan M.; Snead, John H.; Malarik, Diane C.

2000-01-01

At the NASA Glenn Research Center, the Microgravity Science Program is planning to conduct a large number of experiments on the International Space Station in both the Fluid Physics and Combustion Science disciplines, and is developing flight experiment hardware for use within the International Space Station's Fluids and Combustion Facility. Four fluids physics experiments that require an optical microscope will be sequentially conducted within a subrack payload to the Fluids Integrated Rack of the Fluids and Combustion Facility called the Light Microscopy Module, which will provide the containment, changeout, and diagnostic capabilities to perform the experiments. The Light Microscopy Module is planned as a fully remotely controllable on-orbit microscope facility, allowing flexible scheduling and control of experiments within International Space Station resources. This paper will focus on the four microscope-based experiments, specifically, their objectives and the sample cell and instrument hardware to accommodate their requirements.

Advancement adopted for physical protection system at BARC facilities Tarapur

International Nuclear Information System (INIS)

Jaroli, Manish; Ameta, Rohit; Patil, V.H.; Dubey, K.

2015-01-01

Considering the prevailing security situation and threat perception to the nuclear installations in particular, it has become essential to strengthen security system at BARC Tarapur in an effective manner to avert any attempt of sabotage and to ensure smooth functioning of security and safety of the nuclear installations. International Atomic Energy Agency (IAEA) and Atomic Energy Regulatory Board (AERB) have provided various security guides for the physical protection system (PPS) for nuclear installations and there has been advancement in physical and personnel protection system due to evolution of new technologies. In line with this, latest technologies have been adopted in PPS for BARC facilities, Tarapur recently. This includes state of art RFID card based access control, visitor and contractor management system, electronic key management system. Digital signature based biometric visitor and contractor management system; Digital signature based leave management system; Distress alarm system (DAS); Guard tour monitoring system (GTMS); Secure network access system (SNAS) as well as multilayered access control system at plant level. This will strengthen the surveillance and monitoring of personnel and visitors at BARC facilities. (author)

Nuclear structure studies at intermediate energy. Final report, September 1992--May 1995

International Nuclear Information System (INIS)

Hintz, N.M.

1995-06-01

This constitutes a final report for a two-year grant ending 31 December, 1993, and an additional grant of $15,000 for the period 1 January 1993 to 30 September 1994. At the beginning of 1993 the group consisted of the Principal Investigator (N.H.), two full-time Research Associates (A.S. and V.S.), one part-time Research Associate (M.F.) and one graduate Research Assistant (D.M.). At present only the Principal Investigator in continuing. This report covers the period from September 1992 to April 1995. During this period experiment E 352, '' 208 Pb and 60 Ni (p,t) reaction at 120 MeV'' was completed at the Indiana University Cyclotron Facility (IUCF). A Ph.D. has been awarded (D.M.) on the basis of this work and LAMPF (Los Alamos Meson Physics Facility) E 1201, ''The 40 Ca, (p,2p) reaction at 800 MeV''. A paper on the 208 Pb (p,t) experiment is being prepared for publication, In addition, five papers by members of this group, and four with other collaborators have been published since our last report (September 1992). At present we have one approved experiment (E 1201 above) in the LAMPF cue, but it is unlikely that it will ever be scheduled

Tissue chemical analysis with muonic X-rays

International Nuclear Information System (INIS)

Hutson, R.L.; Reidy, J.J.; Springer, K.; Daniel, H.; Knowles, H.B.

1976-01-01

The stopped muon channel at the Clinton P. Anderson Meson Physics Facility (LAMPF) was used as a source of muons for studying the elemental composition of tissue with muonic X rays. The X ray spectra from several types of tissue were used to determine the amounts of carbon, nitrogen, and oxygen present. These determinations agree with the results of more conventional chemical analysis. The results show that muonic X rays offer a non-invasive technique for determining the amounts of the more abundant elements present in selected regions of the body. (orig.) [de

Medium-energy physics program. Progress report, November 1, 1976--January 31, 1977

Energy Technology Data Exchange (ETDEWEB)

Dunn, E. (comp.)

1977-06-01

Operations and research programs at the LAMPF Linac are reported for the period from November 1, 1976 through January 31, 1977. The contents include: (1) a summary and a list of recent publications; (2) engineering support; (3) accelerator support; (4) accelerator systems development; (5) injector systems; (6) electronic instrumentation and computer systems; (7) accelerator operations; (8) experimental areas; (9) beam line development; (10) large-spectrometer systems; (11) research; (12) nuclear chemistry; (13) practical applications of LAMPF; (14) the PIGMI program (Pion Generator for Medical Irradiations); and (15) management. (PMA)

Medium-energy physics program. Progress report, November 1, 1976--January 31, 1977

International Nuclear Information System (INIS)

Dunn, E.

1977-06-01

Operations and research programs at the LAMPF Linac are reported for the period from November 1, 1976 through January 31, 1977. The contents include: (1) a summary and a list of recent publications; (2) engineering support; (3) accelerator support; (4) accelerator systems development; (5) injector systems; (6) electronic instrumentation and computer systems; (7) accelerator operations; (8) experimental areas; (9) beam line development; (10) large-spectrometer systems; (11) research; (12) nuclear chemistry; (13) practical applications of LAMPF; (14) the PIGMI program (Pion Generator for Medical Irradiations); and (15) management

Health physics manual of good practices for plutonium facilities. [Contains glossary

Energy Technology Data Exchange (ETDEWEB)

Brackenbush, L.W.; Heid, K.R.; Herrington, W.N.; Kenoyer, J.L.; Munson, L.F.; Munson, L.H.; Selby, J.M.; Soldat, K.L.; Stoetzel, G.A.; Traub, R.J.

1988-05-01

This manual consists of six sections: Properties of Plutonium, Siting of Plutonium Facilities, Facility Design, Radiation Protection, Emergency Preparedness, and Decontamination and Decommissioning. While not the final authority, the manual is an assemblage of information, rules of thumb, regulations, and good practices to assist those who are intimately involved in plutonium operations. An in-depth understanding of the nuclear, physical, chemical, and biological properties of plutonium is important in establishing a viable radiation protection and control program at a plutonium facility. These properties of plutonium provide the basis and perspective necessary for appreciating the quality of control needed in handling and processing the material. Guidance in selecting the location of a new plutonium facility may not be directly useful to most readers. However, it provides a perspective for the development and implementation of the environmental surveillance program and the in-plant controls required to ensure that the facility is and remains a good neighbor. The criteria, guidance, and good practices for the design of a plutonium facility are also applicable to the operation and modification of existing facilities. The design activity provides many opportunities for implementation of features to promote more effective protection and control. The application of ''as low as reasonably achievable'' (ALARA) principles and optimization analyses are generally most cost-effective during the design phase. 335 refs., 8 figs., 20 tabs.

Using virtual reality in the training of security staff and evaluation of physical protection barriers in nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Augusto, Silas C.; Mol, Antonio C.A.; Mol, Pedro C.; Sales, Douglas S. [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Universidade do Estado do Rio de Janeiro (UERJ), RJ (Brazil)], e-mail: silas@ien.gov.br, e-mail: mol@ien.gov.br, e-mail: pedro98@gmail.com, e-mail: dsales@ien.gov.br

2009-07-01

The physical security of facilities containing radioactive objects, an already important matter, now has a new aggravating factor: the existence of groups intending to obtain radioactive materials for the purpose of intentionally induce radioactive contamination incidents, as for example the explosion of dirty bombs in populated regions, damaging both people and environment. In this context, the physical security of such facilities must be reinforced so to reduce the possibilities of such incidents. This paper presents a adapted game engine used as a virtual reality system, enabling the modeling and simulation of scenarios of nuclear facilities containing radioactive objects. In these scenarios, the physical protection barriers, as fences and walls, are simulated along with vigilance screens. Using a computer network, several users can participate simultaneously in the simulation, being represented by avatars. Users can play the roles of both invaders and security staff. The invaders have as objective to surpass the facility's physical protection barriers to steal radioactive objects and flee. The security staff have as objective to prevent and stop the theft of radioactive objects from the facility. The system can be used to analysis simulated scenarios and train vigilance/security staff. A test scenario was already developed and used, and the preliminary tests had satisfactory results, as they enabled the evaluation of the physical protection barriers of the virtual facility, and the training of those who participated in the simulations in the functions of a security staff. (author)

Using virtual reality in the training of security staff and evaluation of physical protection barriers in nuclear facilities

International Nuclear Information System (INIS)

Augusto, Silas C.; Mol, Antonio C.A.; Mol, Pedro C.; Sales, Douglas S.

2009-01-01

The physical security of facilities containing radioactive objects, an already important matter, now has a new aggravating factor: the existence of groups intending to obtain radioactive materials for the purpose of intentionally induce radioactive contamination incidents, as for example the explosion of dirty bombs in populated regions, damaging both people and environment. In this context, the physical security of such facilities must be reinforced so to reduce the possibilities of such incidents. This paper presents a adapted game engine used as a virtual reality system, enabling the modeling and simulation of scenarios of nuclear facilities containing radioactive objects. In these scenarios, the physical protection barriers, as fences and walls, are simulated along with vigilance screens. Using a computer network, several users can participate simultaneously in the simulation, being represented by avatars. Users can play the roles of both invaders and security staff. The invaders have as objective to surpass the facility's physical protection barriers to steal radioactive objects and flee. The security staff have as objective to prevent and stop the theft of radioactive objects from the facility. The system can be used to analysis simulated scenarios and train vigilance/security staff. A test scenario was already developed and used, and the preliminary tests had satisfactory results, as they enabled the evaluation of the physical protection barriers of the virtual facility, and the training of those who participated in the simulations in the functions of a security staff. (author)

The association between the physical environment and the well-being of older people in residential care facilities: A multilevel analysis.

Science.gov (United States)

Nordin, Susanna; McKee, Kevin; Wijk, Helle; Elf, Marie

2017-12-01

To investigate the associations between the quality of the physical environment and the psychological and social well-being of older people living in residential care facilities. Many older people in care facilities have cognitive and physical frailties and are at risk of experiencing low levels of well-being. High-quality physical environments can support older people as frailty increases and promote their well-being. Although the importance of the physical environment for residents' well-being is recognized, more research is needed. A cross-sectional survey of 20 care facilities from each of which 10 residents were sampled. As the individual resident data were nested in the facilities, a multilevel analysis was conducted. Data were collected during 2013 and 2014. The care facilities were purposely sampled to ensure a high level of variation in their physical characteristics. Residents' demographic and health data were collected via medical records and interviews. Residents' well-being and perceived quality of care were assessed via questionnaires and interviews. Environmental quality was assessed with a structured observational instrument. Multilevel analysis indicated that cognitive support in the physical environment was associated with residents' social well-being, after controlling for independence and perceived care quality. However, no significant association was found between the physical environment and residents' psychological well-being. Our study demonstrates the role of the physical environment for enhancing the social well-being of frail older people. Professionals and practitioners involved in the design of care facilities have a responsibility to ensure that such facilities meet high-quality specifications. © 2017 The Authors. Journal of Advanced Nursing Published by John Wiley & Sons Ltd.

τ physics using the TPC/2γ facility at HiLum PEP

International Nuclear Information System (INIS)

Bloom, E.D.

1991-01-01

Plans for a TPC/2γ facility program using HiLum PEP for τ physics are presented. The detector and its performance are described in some detail. The possibilities for a τ physics program with an integrated luminosity of 1 fb -1 are discussed. The physics issues are reviewed, particularly the τ'1-prong' problem, and preliminary results on τ → ν τ K +- X + X - + ≥ 0 Neutrals are shown. The performance of HiLum PEP is also presented, and expectations for the future are discussed. (R.P.) 15 refs., 14 figs., 3 tabs

[Safeguards for the physical protection of nuclear materials and facilities

International Nuclear Information System (INIS)

Jones, O.E.

1975-01-01

Testimony is given on the subject of safeguards for the physical protection of nuclear materials and facilities, particularly during transportation. The ERDA nation-wide safe-secure transportation system and the Safe-Secure Trailer are described. The nationwide ERDA voice communication system is also described. Development of hardware and systems is discussed. The use of adversary simulation for evaluating protection systems is mentioned

Innovative spin precessor for intermediate energy protons

International Nuclear Information System (INIS)

Hoffman, E.W.

1979-01-01

A spin precessor has been designed to provide arbitrary orientation of the polarization in the external proton beam at LAMPF. The device utilizes two superconducting solenoids, three conventional dipoles, and conversion of polarized H - to H + to provide an achromatic, undeflected beam with tunable spin orientation over a range of energies from 400 MeV to 800 MeV. A portion of this device is being installed to provide compatibility between two facilities which simultaneously use two branches of the external proton beam at LAMPF

Shared use of school facilities with community organizations and afterschool physical activity program participation: a cost-benefit assessment.

Science.gov (United States)

Kanters, Michael A; Bocarro, Jason N; Filardo, Mary; Edwards, Michael B; McKenzie, Thomas L; Floyd, Myron F

2014-05-01

Partnerships between school districts and community-based organizations to share school facilities during afterschool hours can be an effective strategy for increasing physical activity. However, the perceived cost of shared use has been noted as an important reason for restricting community access to schools. This study examined shared use of middle school facilities, the amount and type of afterschool physical activity programs provided at middle schools together with the costs of operating the facilities. Afterschool programs were assessed for frequency, duration, and type of structured physical activity programs provided and the number of boys and girls in each program. School operating costs were used to calculate a cost per student and cost per building square foot measure. Data were collected at all 30 middle schools in a large school district over 12 months in 2010-2011. Policies that permitted more use of school facilities for community-sponsored programs increased participation in afterschool programs without a significant increase in operating expenses. These results suggest partnerships between schools and other community agencies to share facilities and create new opportunities for afterschool physical activity programs are a promising health promotion strategy. © 2014, American School Health Association.

The association between high recreational physical activity and physical activity as a part of daily living in adolescents and availability of local indoor sports facilities and sports clubs

DEFF Research Database (Denmark)

Niclasen, B.; Petzold, M.; Schnohr, Christina Warrer

2012-01-01

Aim: The aim of this study was to examine how vigorous physical activity (recreational physical activity) (VPA) and moderate to vigorous physical activity as a part of daily life (MVPA) is associated with structural characteristics (availability of sports facilities and sports clubs with child...... facilities and of sports clubs with child members as independent variables, and adjusted for age, gender, family affluence (FAS), and type of habitation (capital, town or village). Results: High VPA increased with access to indoor facilities, while high MVPA was less likely (odds ratio (OR) 0.54 (0......, gender and FAS but positively associated if also adjusted for indoor sports facilities. Conclusions: Access to indoor sports facilities itself had a positive association with high VPA, but was persistently negatively associated with high MVPA. Presence of sports clubs with child members was positively...

Health physics experience with nondestructive X-radiation facilities in the US Air Force

International Nuclear Information System (INIS)

Stencel, J.R.; Piltingsrud, H.V.

1976-01-01

Radiation safety experience in the construction and use of enclosed nondestructive inspection (NDI) facilities in the US Air Force, has reaffirmed the constant need for the health physicist to continually monitor and assit in upgrading these facilities. Health physics contributions include evaluation of initial shielding requirements, proper selection of construction material, insuring that adequate safety devices are installed and adequate personnel dosimetry devices are available, surveying the facility, and assisting in the safety education program. There is a need to better define NDI warning/safety devices, using the National Bureau of Standards, (NBS) Handbook 107 as the most applicable guide

Identification of potential recovery facilities for designing a reverse supply chain network using physical programming

Science.gov (United States)

Pochampally, Kishore K.; Gupta, Surendra M.; Kamarthi, Sagar V.

2004-02-01

Although there are many quantitative models in the literature to design a reverse supply chain, every model assumes that all the recovery facilities that are engaged in the supply chain have enough potential to efficiently re-process the incoming used products. Motivated by the risk of re-processing used products in facilities of insufficient potentiality, this paper proposes a method to identify potential facilities in a set of candidate recovery facilities operating in a region where a reverse supply chain is to be established. In this paper, the problem is solved using a newly developed method called physical programming. The most significant advantage of using physical programming is that it allows a decision maker to express his preferences for values of criteria (for comparing the alternatives), not in the traditional form of weights but in terms of ranges of different degrees of desirability, such as ideal range, desirable range, highly desirable range, undesirable range, and unacceptable range. A numerical example is considered to illustrate the proposed method.

Physics design of fast reactor safety test facilities for in-pile experiments

International Nuclear Information System (INIS)

Travelli, A.; Matos, J.E.; Snelgrove, J.L.; Shaftman, D.H.; Tzanos, C.P.; Lam, S.K.; Pennington, E.M.; Woodruff, W.L.

1976-01-01

A determined effort to identify and resolve current Fast Breeder Reactor safety testing needs has recently resulted in a number of conceptual designs for FBR safety test facilities which are very complex and diverse both in their features and in their purpose. The paper discusses the physics foundations common to most fast reactor safety test facilities and the constraints which they impose on the design. The logical evolution, features, and capabilities of several major conceptual designs are discussed on the basis of this common background

A Road map for Establishing the Physical Protection Regime of Nuclear Materials and Facilities

International Nuclear Information System (INIS)

Yoo, Ho-Sik; Kwak, Sung-Woo; Jang, Sung-Soon; Kim, Jae-Kwang; Kim, Jung-Soo; Yoon, Wan-Ki

2007-01-01

The importance of physical protection for nuclear materials and facilities that can be an objective for terrorists has never been more stressed. The responsibility for physical protection within a State does not rest entirely with that state because cross-border transactions related to nuclear materials increase as nuclear related industries expand. The international community has prepared measures to strengthen the regime of physical protection such as the IAEA's proposal of the 'Nuclear Security Plan for 2006-2009' and UN's resolution on 'the International Convention for the Suppression of Acts of Nuclear Terrorism'. In order to cope with this, Korea has also made efforts to establish the implementation system for physical protection in the field of nuclear industries since the law for Physical Protection of Nuclear Material and Facility and Radiological Emergency Preparedness (LPPREP) was promulgated in 2004. The detailed plans should be prepared to accomplish this. This study has been performed to derive the items for establishing the regime of physical protection. The items derived were classified as short, mid and long-term depending on their characteristics and environmental circumstances. The regime of national physical protection will be established if the studies on these items are carried out successfully and tangible results are obtained

Class notes from the first international training course on the physical protection of nuclear facilities and materials

Energy Technology Data Exchange (ETDEWEB)

Herrington, P.B. (ed.)

1979-05-01

The International Training Course on Physical Protection of Nuclear Facilities and Materials was intended for representatives from the developing countries who are responsible for preparing regulations and designing and assessing physical protection systems. The first part of the course consists of lectures on the objectives, organizational characteristics, and licensing and regulations requirements of a state system of physical protection. Since the participants may have little experience in nuclear energy, background information is provided on the topics of nuclear materials, radiation hazards, reactor systems, and reactor operations. Transportation of nuclear materials is addressed and emphasis is placed on regulations. Included in these discussions are presentations by guest speakers from countries outside the United States of America who present their countries' threat to nuclear facilities. Effectiveness evaluation methodology is introduced to the participants by means of instructions which teach them how to use logic trees and the EASI (Estimate of Adversary Sequence Interruption) program. The following elements of a physical protection system are discussed: barriers, protective force, intrusion detection systems, communications, and entry-control systems. Total systems concepts of physical protection system design are emphasized throughout the course. Costs, manpower/technology trade-offs, and other practical considerations are discussed. Approximately one-third of the course is devoted to practical exercises during which the attendees participatein problem solving. A hypothetical nuclear facility is introduced, and the attendees participate in the conceptual design of a physical protection system for the facility.

Class notes from the first international training course on the physical protection of nuclear facilities and materials

International Nuclear Information System (INIS)

Herrington, P.B.

1979-05-01

The International Training Course on Physical Protection of Nuclear Facilities and Materials was intended for representatives from the developing countries who are responsible for preparing regulations and designing and assessing physical protection systems. The first part of the course consists of lectures on the objectives, organizational characteristics, and licensing and regulations requirements of a state system of physical protection. Since the participants may have little experience in nuclear energy, background information is provided on the topics of nuclear materials, radiation hazards, reactor systems, and reactor operations. Transportation of nuclear materials is addressed and emphasis is placed on regulations. Included in these discussions are presentations by guest speakers from countries outside the United States of America who present their countries' threat to nuclear facilities. Effectiveness evaluation methodology is introduced to the participants by means of instructions which teach them how to use logic trees and the EASI (Estimate of Adversary Sequence Interruption) program. The following elements of a physical protection system are discussed: barriers, protective force, intrusion detection systems, communications, and entry-control systems. Total systems concepts of physical protection system design are emphasized throughout the course. Costs, manpower/technology trade-offs, and other practical considerations are discussed. Approximately one-third of the course is devoted to practical exercises during which the attendees participatein problem solving. A hypothetical nuclear facility is introduced, and the attendees participate in the conceptual design of a physical protection system for the facility

Data base of reactor physics experimental results in Kyoto University critical assembly experimental facilities

International Nuclear Information System (INIS)

Ichihara, Chihiro; Fujine, Shigenori; Hayashi, Masatoshi

1986-01-01

The Kyoto University critical assembly experimental facilities belong to the Kyoto University Research Reactor Institute, and are the versatile critical assembly constructed for experimentally studying reactor physics and reactor engineering. The facilities are those for common utilization by universities in whole Japan. During more than ten years since the initial criticality in 1974, various experiments on reactor physics and reactor engineering have been carried out using many experimental facilities such as two solidmoderated cores, a light water-moderated core and a neutron generator. The kinds of the experiment carried out were diverse, and to find out the required data from them is very troublesome, accordingly it has become necessary to make a data base which can be processed by a computer with the data accumulated during the past more than ten years. The outline of the data base, the data base CAEX using personal computers, the data base supported by a large computer and so on are reported. (Kako, I.)

Strengthened implementation of physical protection of nuclear material and nuclear facilities in the Republic of Korea

International Nuclear Information System (INIS)

Shim, H.-W.; Lee, J.-U.

2005-01-01

Full text: Since the 9.11 terror, strengthening physical protection has been an accelerated trend internationally. IAEA has been requesting that member states implement a strengthened physical protection of nuclear facilities on the basis of threat assessments. In order to cope with this demand, the Korean government promulgated the 'Law for Physical Protection and Radiological Emergency Preparedness (LPPRE)' as a substantial countermeasure against possible threats. Pursuant to LPPRE, which entered into force on February 16, 2004, nuclear enterprisers are obliged to implement an effective physical protection of nuclear materials, get approval for its physical protection system, and be constantly inspected on. The Ministry of Science and Technology (MOST) approved physical protection regulations of 24 domestic facilities operated by 14 enterprisers. National Nuclear management and Control Agency (NNCA) is entrusted with physical protection related duty and has been conducting physical protection inspection on nuclear materials in use, storage and transport. In addition, NNCA has established the methodology of threat assessment that entails organizing the threat assessment working group to develop a design basis threat (DBT). Korea is putting its best efforts to construct the threat assessment system and strengthen domestic physical protection regime in cooperation with competent authorities. (author)

Commissioning experience and beam physics measurements at the SwissFEL Injector test Facility

CERN Document Server

Schietinger, T.; Aiba, M.; Arsov, V.; Bettoni, S.; Beutner, B.; Calvi, M.; Craievich, P.; Dehler, M.; Frei, F.; Ganter, R.; Hauri, C. P.; Ischebeck, R.; Ivanisenko, Y.; Janousch, M.; Kaiser, M.; Keil, B.; Löhl, F.; Orlandi, G. L.; Ozkan Loch, C.; Peier, P.; Prat, E.; Raguin, J.-Y.; Reiche, S.; Schilcher, T.; Wiegand, P.; Zimoch, E.; Anicic, D.; Armstrong, D.; Baldinger, M.; Baldinger, R.; Bertrand, A.; Bitterli, K.; Bopp, M.; Brands, H.; Braun, H. H.; Brönnimann, M.; Brunnenkant, I.; Chevtsov, P.; Chrin, J.; Citterio, A.; Csatari Divall, M.; Dach, M.; Dax, A.; Ditter, R.; Divall, E.; Falone, A.; Fitze, H.; Geiselhart, C.; Guetg, M. W.; Hämmerli, F.; Hauff, A.; Heiniger, M.; Higgs, C.; Hugentobler, W.; Hunziker, S.; Janser, G.; Kalantari, B.; Kalt, R.; Kim, Y.; Koprek, W.; Korhonen, T.; Krempaska, R.; Laznovsky, M.; Lehner, S.; Le Pimpec, F.; Lippuner, T.; Lutz, H.; Mair, S.; Marcellini, F.; Marinkovic, G.; Menzel, R.; Milas, N.; Pal, T.; Pollet, P.; Portmann, W.; Rezaeizadeh, A.; Ritt, S.; Rohrer, M.; Schär, M.; Schebacher, L.; Scherrer, St.; Schlott, V.; Schmidt, T.; Schulz, L.; Smit, B.; Stadler, M.; Steffen, Bernd; Stingelin, L.; Sturzenegger, W.; Treyer, D. M.; Trisorio, A.; Tron, W.; Vicario, C.; Zennaro, R.; Zimoch, D.

2016-10-26

The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and test bed for the development and realization of SwissFEL, the x-ray Free Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including atransverse deflecting rf cavity. It delivered electron bunchesof up to200 pC chargeand up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of a FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultralow-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measureme...

Study of neutrino-electron scattering at LAMPF

International Nuclear Information System (INIS)

Potter, M.E.

1987-01-01

Using a beam stop source of ν e from stopped μ + A decay located at the Clinton B. Anderson Meson Physics Facility at the Los Alamos National Laboratory, a measurement of the reaction ν e + e - → ν e +e - was performed. In the Weinberg-Salam-Glashow model of electroweak interactions, the above reaction is mediated both by the exchange of a Z boson (neutral-current) and the exchange of a W boson (charged-current), and is thus sensitive to the interference between these two exchanges. A total of 304 ± 49 ν x e events are identified of which 254 ± 50 are attributed to ν e e elastic scattering. The observed event rate rules out the opposite sign of the interference by 4.6σ and is consistent with the interference predicted by the WSG model. The measured cross-section is σ(ν e e) = |11.8 ± 2.5(stat) ± 1.2(syst)| x 10 -42 cm 2 x E ν (GeV) with a measured Weinberg angle of sin 2 Θ ω = 0.31 ± 0.08 (stat) ±0.03(syst)

Nuclear science research at the WNR and LANSCE neutron sources

International Nuclear Information System (INIS)

Lisowski, P.W.

1994-01-01

The Weapons Neutron Research (WNR) Facility and the Los Alamos Neutron Scattering Center (LANSCE) use 800 MeV proton beam from the Los Alamos Meson Physics Facility (LAMPF) to generate intense bursts of neutrons. Experiments using time-of-flight (TOF) energy determination can cover an energy range from thermal to about 2 MeV at LANSCE and 0.1 to 800 MeV at WNR. At present, three flight paths at LANSCE and six flight paths at WNR are used in basic and applied nuclear science research. In this paper we present a status report on WNR and LANSCE, discuss plans for the future, and describe three experiments recently completed or underway that use the unique features of these sources

New muonium HFS measurements at J-PARC/MUSE

Energy Technology Data Exchange (ETDEWEB)

Strasser, P., E-mail: patrick.strasser@kek.jp [High Energy Accelerator Research Organization (KEK) (Japan); Aoki, M. [Osaka University, Department of Physics (Japan); Fukao, Y. [High Energy Accelerator Research Organization (KEK) (Japan); Higashi, Y.; Higuchi, T. [University of Tokyo, Graduate School of Arts and Sciences (Japan); Iinuma, H.; Ikedo, Y. [High Energy Accelerator Research Organization (KEK) (Japan); Ishida, K. [RIKEN (Japan); Ito, T. U. [Japan Atomic Energy Agency (JAEA), Advanced Science Research Center (Japan); Iwasaki, M. [RIKEN (Japan); Kadono, R. [High Energy Accelerator Research Organization (KEK) (Japan); Kamigaito, O. [RIKEN (Japan); Kanda, S. [University of Tokyo, Graduate School of Science (Japan); Kawall, D. [University of Massachusetts Amherst, Physics Department (United States); Kawamura, N.; Koda, A.; Kojima, K. M. [High Energy Accelerator Research Organization (KEK) (Japan); Kubo, K. [International Christian University (ICU) (Japan); Matsuda, Y.; Matsudate, Y. [University of Tokyo, Graduate School of Arts and Sciences (Japan); and others

2016-12-15

At the Muon Science Facility (MUSE) of J-PARC (Japan Proton Accelerator Research Complex), the MuSEUM collaboration is planing new measurements of the ground state hyperfine structure (HFS) of muonium both at zero field and at high magnetic field. The previous measurements were performed both at LAMPF (Los Alamos Meson Physics Facility) with experimental uncertainties mostly dominated by statistical errors. The new high intensity muon beam that will soon be available at MUSE H-Line will provide an opportunity to improve the precision of these measurements by one order of magnitude. An overview of the different aspects of these new muonium HFS measurements, the current status of the preparation, and the results of a first commissioning test experiment at zero field are presented.

The MOVE study: a study protocol for a randomised controlled trial assessing interventions to maximise attendance at physical activity facilities.

Science.gov (United States)

Newton, Joshua D; Klein, Ruth; Bauman, Adrian; Newton, Fiona J; Mahal, Ajay; Gilbert, Kara; Piterman, Leon; Ewing, Michael T; Donovan, Robert J; Smith, Ben J

2015-04-18

Physical activity is associated with a host of health benefits, yet many individuals do not perform sufficient physical activity to realise these benefits. One approach to rectifying this situation is through modifying the built environment to make it more conducive to physical activity, such as by building walking tracks or recreational physical activity facilities. Often, however, modifications to the built environment are not connected to efforts aimed at encouraging their use. The purpose of the Monitoring and Observing the Value of Exercise (MOVE) study is to evaluate the effectiveness of two interventions designed to encourage the ongoing use of a new, multi-purpose, community-based physical activity facility. A two-year, randomised controlled trial with yearly survey points (baseline, 12 months follow-up, 24 months follow-up) will be conducted among 1,300 physically inactive adult participants aged 18-70 years. Participants will be randomly assigned to one of three groups: control, intervention 1 (attendance incentives), or intervention 2 (attendance incentives and tailored support following a model based on customer relationship management). Primary outcome measures will include facility usage, physical activity participation, mental and physical wellbeing, community connectedness, social capital, friendship, and social support. Secondary outcome measures will include stages of change for facility usage and social cognitive decision-making variables. This study will assess whether customer relationship management systems, a tool commonly used in commercial marketing settings, can encourage the ongoing use of a physical activity facility. Findings may also indicate the population segments among which the use of such systems are most effective, as well as their cost-effectiveness. Australian New Zealand Clinical Trials Registry: ACTRN12615000012572 (registered 9 January 2015).

Analysis of impact of noncompliance with physical-security requirements at nuclear facilities

International Nuclear Information System (INIS)

Green, J.N.

1982-03-01

Inspectors are required to analyze the impact of instances of noncompliance with physical security requirements at licensed nuclear facilities. A scoring procedure for components and a method for evaluating the effectiveness of the subsystems involved are proposed to reinforce an inspector's judgment about the remaining level of safeguards

Intermediate-energy nuclear chemistry workshop

International Nuclear Information System (INIS)

Butler, G.W.; Giesler, G.C.; Liu, L.C.; Dropesky, B.J.; Knight, J.D.; Lucero, F.; Orth, C.J.

1981-05-01

This report contains the proceedings of the LAMPF Intermediate-Energy Nuclear Chemistry Workshop held in Los Alamos, New Mexico, June 23-27, 1980. The first two days of the Workshop were devoted to invited review talks highlighting current experimental and theoretical research activities in intermediate-energy nuclear chemistry and physics. Working panels representing major topic areas carried out indepth appraisals of present research and formulated recommendations for future research directions. The major topic areas were Pion-Nucleus Reactions, Nucleon-Nucleus Reactions and Nuclei Far from Stability, Mesonic Atoms, Exotic Interactions, New Theoretical Approaches, and New Experimental Techniques and New Nuclear Chemistry Facilities

Intermediate-energy nuclear chemistry workshop

Energy Technology Data Exchange (ETDEWEB)

Butler, G.W.; Giesler, G.C.; Liu, L.C.; Dropesky, B.J.; Knight, J.D.; Lucero, F.; Orth, C.J.

1981-05-01

This report contains the proceedings of the LAMPF Intermediate-Energy Nuclear Chemistry Workshop held in Los Alamos, New Mexico, June 23-27, 1980. The first two days of the Workshop were devoted to invited review talks highlighting current experimental and theoretical research activities in intermediate-energy nuclear chemistry and physics. Working panels representing major topic areas carried out indepth appraisals of present research and formulated recommendations for future research directions. The major topic areas were Pion-Nucleus Reactions, Nucleon-Nucleus Reactions and Nuclei Far from Stability, Mesonic Atoms, Exotic Interactions, New Theoretical Approaches, and New Experimental Techniques and New Nuclear Chemistry Facilities.

Monitor, the prelude to robotics

International Nuclear Information System (INIS)

Grisham, D.L.; Lambert, J.E.

1985-01-01

Robots and teleoperator systems will play an important role in future energy systems regardless of the particular energy source. Present remote handling systems were developed for radioactive environments; however, future sources, such as fusion reactors, solar concentrators, and wind generators will also produce environments too hostile for practical ''hands on'' maintenance. Teleoperator systems developed at the Clinton P. Anderson Meson Physics Facility (LAMPF) are a logical prelude to performing remote operations with robots. The ''Monitor'' remote handling systems represented state-of-the-art mechanical hardware and operating techniques - the only elements missing are suitable computer and software interfaces

Licensing of spent fuel storage facility including its physical protection in the Czech Republic

International Nuclear Information System (INIS)

Fajman, V.; Sedlacek, J.

1992-01-01

The current spent fuel management policies as practised in the Czech Republic are described, and the conception of the fuel cycle back end is outlined. The general principles and the legislative framework are explained of the licensing process concerning spent fuel interim storage facilities, including the environmental impact assessment component. The history is outlined of the licensing process for the spent fuel storage facility at the Dukovany NPP site, including the licensing of the transport and storage cask. The basic requirements placed on the physical safeguarding of the facility and on the licensing process are given. (J.B.). 13 refs

An integrated model to measure service management and physical constraints' effect on food consumption in assisted-living facilities.

Science.gov (United States)

Huang, Hui-Chun; Shanklin, Carol W

2008-05-01

The United States is experiencing remarkable growth in the elderly population, which provides both opportunities and challenges for assisted-living facilities. The objective of this study was to explore how service management influences residents' actual food consumption in assisted-living facilities. Physical factors influencing residents' service evaluation and food consumption also were investigated. A total of 394 questionnaires were distributed to assisted-living residents in seven randomly selected facilities. The questionnaire was developed based on an in-depth literature review and pilot study. Residents' perceived quality evaluations, satisfaction, and physical constraints were measured. Residents' actual food consumption was measured using a plate waste technique. A total of 118 residents in five facilities completed both questionnaires and food consumption assessments. Descriptive, multivariate analyses and structural equation modeling techniques were employed. Service management, including food and service quality and customer satisfaction, was found to significantly influence residents' food consumption. Physical constraints associated with aging, including a decline in health status, chewing problems, sensory loss, and functional disability, also significantly influenced residents' food consumption. A significant relationship was found between physical constraints and customer satisfaction. Foodservice that provides good food and service quality increases customer satisfaction and affects residents' actual food consumption. Physical constraints also influence residents' food consumption directly, or indirectly through satisfaction. The findings suggest that food and nutrition professionals in assisted-living should consider the physical profiles of their residents to enhance residents' satisfaction and nutrient intake. Recommendations for exploring residents' perspectives are discussed.

Nuclear structure and reaction studies at medium energies

International Nuclear Information System (INIS)

Hoffmann, G.W.; Ray, R.L.

1990-10-01

This document constitutes the (1988--1991) technical progress report for the ongoing medium energy physics research program supported by the US Department of Energy through special Research Grant FG05-88ER40444. The experiments discussed are conducted at the Los Alamos National Laboratory's (LANL) Clinton P. Anderson Meson Physics Facility (LAMPF), the Alternating Gradient Synchrotron (AGS) facility of the Brookhaven National Laboratory (BNL), and at the Fermi National Accelerator Laboratory (FNAL). The overall motivation for the work discussed in this document is driven by three main objectives: (1) provide hadron-nucleon and hadron-nucleus scattering data which serve to facilitate the study of effective two-body interactions, test (and possibly determine) nuclear structure, and help study reaction mechanisms and dynamics;(2) provide unique, first-of-a-kind ''exploratory'' hadron-nucleus scattering data in the hope that such data will lead to discovery of new phenomena and new physics; and (3) perform precision tests of fundamental interactions, such as rare decay searches, whose observation would imply fundamental new physics

Research in elementary particle physics

International Nuclear Information System (INIS)

Chan, Lai-Him; Haymaker, R.; Imlay, R.; McNeil, R.; Metcalf, W.; Svoboda, R.

1993-01-01

Theoretical work on effective action expansion, low-energy models of hadrons and lattice gauge theories is reported. The progress on the electron-proton experiment ZEUS in Germany, LSND neutrino experiment at LAMPF, the Dumand experiment in Hawaii, and the Super Kamiokande experiment in Japan is described. Results from IMB are described

Legal Aspects of international cooperation in the physical protection of nuclear facilities and materials

International Nuclear Information System (INIS)

Herron, L.W.

1981-10-01

This paper provides a detailed analysis of developments in the number field having led the IAEA to promote international cooperation in ensuring adequate physical protection of nuclear facilities and materials. This work resulted in the establishment of recommendations and guidelines in this respect and culminated in the development of the 1980 Convention on the Physical Protection of Nuclear Materials. (NEA) [fr

Naturally occurring workplace facilities to increase the leisure time physical activity of workers: A propensity-score weighted population study

OpenAIRE

Aviroop Biswas; Peter M. Smith; Monique A.M. Gignac

2018-01-01

The benefit of providing access to physical activity facilities at or near work to support the leisure time physical activity (LTPA) of workers is uncertain. We examined the association between access to physical activity facilities at or near work and the LTPA of workers after adjusting for a range of individual and occupational characteristics. Data was obtained from 60,650 respondents to the 2007–2008 Canadian Community Health Survey. Participants were employed adults ≥18 years of age who ...

Atomic physics with highly-charged heavy ions at the GSI future facility: The scientific program of the SPARC collaboration

International Nuclear Information System (INIS)

Stoehlker, Th.; Beier, T.; Beyer, H.F.; Bosch, F.; Braeuning-Demian, A.; Gumberidze, A.; Hagmann, S.; Kozhuharov, C.; Kuehl, Th.; Liesen, D.; Mann, R.; Mokler, P.H.; Quint, W.; Schuch, R.; Warczak, A.

2005-01-01

In the current report a short overview about the envisioned program of the atomic physics research collaboration SPARC (Stored Particle Atomic Research Collaboration, at the new international accelerator Facility for Antiproton and Ion Research (FAIR) at GSI is given. In addition, a condensed description of the planned experimental areas devoted to atomic physics research at the new facility is presented

Use of the project management methodology to establish physical protection system at nuclear facility

International Nuclear Information System (INIS)

Gramotkin, F.; Kuzmyak, I.; Kravtsov, V.

2015-01-01

The paper considers the possibility of using the project management methodology developed by the Project Management Institute (USA) in nuclear security in terms of modernization or development of physical protection system at nuclear facility. It was demonstrated that this methodology allows competent and flexible management of the projects on physical protection, ensuring effective control of their timely implementation in compliance with the planned budget and quality

Program for upgrading nuclear materials protection, control, and accounting at all facilities within the All-Russian Institute of Experimental Physics (VNIIEF)

International Nuclear Information System (INIS)

Yuferev, V.; Zhikharev, S.; Yakimov, Y.

1998-01-01

As part of the Department of Energy-Russian program for strengthening nuclear material protection, control, and accounting (MPC and A), plans have now been formulated to install an integrated MPC and A system at all facilities containing large quantities of weapons-usable nuclear material within the All-Russian Institute of Experimental Physics (VNIIEF, Arzamas-16) complex. In addition to storage facilities, the complex houses a number of critical facilities used to conduct nuclear physics research and facilities for developing procedures for disassembly of nuclear weapons

Large facilities in physics

International Nuclear Information System (INIS)

Jacob, M.; Schopper, H.

1995-01-01

The papers presented at this conference dealt with the following topics: particle physics, computing and data transmission, nuclear and atomic physics and their new facets, condensed matter physics, fusion and plasma physics, astrophysics and astroparticle physics. The proceedings include the review talks, a report on the OECD Megascience Forum and summaries of the round-table discussions. figs., tabs., refs

GENIUS - a new facility of non-accelerator particle physics

International Nuclear Information System (INIS)

Klapdor-Kleingrothaus, H.V.

2001-01-01

The GENIUS (Germanium in Liquid Nitrogen Underground Setup) project has been proposed in 1997 [1] as first third generation double beta decay project, with a sensitivity aiming down to a level of an effective neutrino mass of ∼ 0.01 - 0.001 eV. Such sensitivity has been shown to be indispensable to solve the question of the structure of the neutrino mass matrix which cannot be solved by neutrino oscillation experiments alone [2]. It will allow broad access also to many other topics of physics beyond the Standard Model of particle physics at the multi-TeV scale. For search of cold dark matter GENIUS will cover almost the full range of the parameter space of predictions of SUSY for neutralinos as dark matter [3,4]. Finally, GENIUS has the potential to be the first real-time detector for low-energy (pp and 7 Be) solar neutrinos [6,5]. A GENIUS-Test Facility has just been funded and will come into operation by end of 2001

nu/sub μ/C12 → μ-X cross section and nu/sub μ/ - nu/sub e/ oscillation using the decay-in-flight source at Line-E of LAMPF

International Nuclear Information System (INIS)

Clearwater, S.

1984-01-01

This paper describes an experiment to measure the nu/sub μ/C 12 → μ - X cross section and to detect nu/sub μ/ - nu/sub e/ oscillations. A test run was completed last year. The detector has been calibrated and backgrounds are under study. The sensitivity of the experiment is estimated for the 1985 LAMPF run cycle to be +-20% for the cross section measurement and the 90% confidence level limits for the neutrino oscillation experiment are sin 2 2THETA -3 and Δm 2 -1 eV 2

An e-p facility for Europe. Weak interactions in e-p physics

International Nuclear Information System (INIS)

Turlay, R.

1979-01-01

We first present the recent development on an e-p collider in Europe occuring in the last year. Then a review of physics motivations for an e-p ring is discussed and developed with the latest work presented at the meeting on 'Study for an e-p Facility for Europe' held at Hamburg on April 2-3, 1979

Physical security of nuclear facilities

International Nuclear Information System (INIS)

Dixon, H.

1987-01-01

A serious problem with present security systems at nuclear facilities is that the threats and standards prepared by the NRC and DOE are general, and the field offices are required to develop their own local threats and, on that basis, to prepared detailed specifications for security systems at sites in their jurisdiction. As a result, the capabilities of the systems vary across facilities. Five steps in particular are strongly recommended as corrective measures: 1. Those agencies responsible for civil nuclear facilities should jointly prepare detailed threat definitions, operational requirements, and equipment specifications to protect generic nuclear facilities, and these matters should be issued as policy. The agencies should provide sufficient detail to guide the design of specific security systems and to identify candidate components. 2. The DOE, NRC, and DOD should explain to Congress why government-developed security and other military equipment are not used to upgrade existing security systems and to stock future ones. 3. Each DOE and NRC facility should be assessed to determine the impact on the size of the guard force and on warning time when personnel-detecting radars and ground point sensors are installed. 4. All security guards and technicians should be investigated for the highest security clearance, with reinvestigations every four years. 5. The processes and vehicles used in intrafacility transport of nuclear materials should be evaluated against a range of threats and attack scenarios, including violent air and vehicle assaults. All of these recommendations are feasible and cost-effective. The appropriate congressional subcommittees should direct that they be implemented as soon as possible

An alternative format for Category I fuel cycle facility physical protection plans

International Nuclear Information System (INIS)

Dwyer, P.A.

1992-06-01

This document provides an alternative format for physical protection plans designed to meet the requirements of Title 10 of the Code of Federal Regulations, Sections 73.20, 73.45, and 73.46. These requirements apply to licensees who operate Category I fuel cycle facilities. Such licensees are authorized to use or possess a formula quantity of strategic special nuclear material. The format described is an alternative to that found under Regulatory Guide 5.52, Rev. 2 ''Standard Format and Content of a Licensee Physical Protection Plan for Strategic Special Nuclear Material at Fixed Sites (Other than Nuclear Power Plants).''

Increasing the effectiveness of the physical protection system on a nuclear facility

Energy Technology Data Exchange (ETDEWEB)

Vaz, Antonio C.A.; Conti, Thadeu N., E-mail: acavaz@ipen.br, E-mail: tnconti@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

The malicious use of radioactive material could be devastating, particularly in the case of a nuclear explosive device, it could be unpredictably disruptive resulting in the dispersal of radioactive material, like it was in the Fukushima Daiichi Nuclear Power Plant disaster. Physical Protection System (PPS) plays an important role in ensuring that individuals, organizations and institutions remain vigilant and that sustained measures are taken to prevent and combat the threat of sabotage or of using radioactive material for malicious acts. PPS is an integrated system of people, equipment and procedures used to protect nuclear facilities and radioactive sources against threat, theft or sabotage. In the operator's perspective, this paper study factors influencing the performance of a PPS in a nuclear facility suggesting ways to increase the system effectiveness. The human factor, the physical and the psychological work environment has a large impact on how personnel perform their work and comply with nuclear security requirements. Apathy and corporatism are two human behaviors that collaborate negatively and make decrease the effectiveness of any PPS. Job satisfaction reduces the probability that personnel will become less reliable and/or obstructive in extreme cases an insider threat. Managers must recognize individual and group needs and the relationship among personnel so that they may motivate personnel by creating a supportive working environment that reduces workplace stress. An effective PPS can result in a significant increase in the effectiveness of the security of radioactive material and associated facilities. (author)

Increasing the effectiveness of the physical protection system on a nuclear facility

International Nuclear Information System (INIS)

Vaz, Antonio C.A.; Conti, Thadeu N.

2017-01-01

The malicious use of radioactive material could be devastating, particularly in the case of a nuclear explosive device, it could be unpredictably disruptive resulting in the dispersal of radioactive material, like it was in the Fukushima Daiichi Nuclear Power Plant disaster. Physical Protection System (PPS) plays an important role in ensuring that individuals, organizations and institutions remain vigilant and that sustained measures are taken to prevent and combat the threat of sabotage or of using radioactive material for malicious acts. PPS is an integrated system of people, equipment and procedures used to protect nuclear facilities and radioactive sources against threat, theft or sabotage. In the operator's perspective, this paper study factors influencing the performance of a PPS in a nuclear facility suggesting ways to increase the system effectiveness. The human factor, the physical and the psychological work environment has a large impact on how personnel perform their work and comply with nuclear security requirements. Apathy and corporatism are two human behaviors that collaborate negatively and make decrease the effectiveness of any PPS. Job satisfaction reduces the probability that personnel will become less reliable and/or obstructive in extreme cases an insider threat. Managers must recognize individual and group needs and the relationship among personnel so that they may motivate personnel by creating a supportive working environment that reduces workplace stress. An effective PPS can result in a significant increase in the effectiveness of the security of radioactive material and associated facilities. (author)

Commissioning experience and beam physics measurements at the SwissFEL Injector Test Facility

Directory of Open Access Journals (Sweden)

T. Schietinger

2016-10-01

Full Text Available The SwissFEL Injector Test Facility operated at the Paul Scherrer Institute between 2010 and 2014, serving as a pilot plant and test bed for the development and realization of SwissFEL, the x-ray Free-Electron Laser facility under construction at the same institute. The test facility consisted of a laser-driven rf electron gun followed by an S-band booster linac, a magnetic bunch compression chicane and a diagnostic section including a transverse deflecting rf cavity. It delivered electron bunches of up to 200 pC charge and up to 250 MeV beam energy at a repetition rate of 10 Hz. The measurements performed at the test facility not only demonstrated the beam parameters required to drive the first stage of an FEL facility, but also led to significant advances in instrumentation technologies, beam characterization methods and the generation, transport and compression of ultralow-emittance beams. We give a comprehensive overview of the commissioning experience of the principal subsystems and the beam physics measurements performed during the operation of the test facility, including the results of the test of an in-vacuum undulator prototype generating radiation in the vacuum ultraviolet and optical range.

(Development of Bromine-77 from the LAMPF facility)

Energy Technology Data Exchange (ETDEWEB)

1989-01-01

The objective of the work was to conduct the necessary studies required to evaluate the efficacy, potential benefit and role of bromine-77 labeled steroids in the detection and evaluation of treatment for hormone-dependent tumors. This report presents progress on the following tasks: An initial investigation concentrating on the radiobromination at carbon-6 or carbon-7 in selected simple steroids utilizing the nuclides, bromine-82 and bromine-77, analytical spectroscopy of radiolabeled compounds, and investigating the biodistribution, toxicology and tumor affinity of labeled agents.

Measurement of observables in the pion-nucleon system and investigation of charge symmetry in 3H and 3He: Progress report, March 1, 1986-February 28, 1987

International Nuclear Information System (INIS)

Sadler, M.E.

1987-03-01

This report describes the progress made in the past year in the pion scattering programs in which Abilene Christian University is collaborating. The measurements include (1) a complete set of observables in the pion-nucleon system in the momentum interval 400 to 700 MeV/e, (2) differential cross sections at low energy for pion-nucleon charge exchange, and (3) elastic and inelastic scattering of π +- on 3 H and 3 He. Highlights of the progress in 1986 to 87 include (1) first measurement of the spin rotation parameters A and R for π +- p → π +- p scattering at 427 to 657 MeV/e, for which the principal investigator received support from Associated Western Universities (AWU) and ACU for sabbatical leave in Los Alamos, (2) final publication of the data for the differential cross sections and analyzing powers for π +- p elastic scattering at 378 to 687 MeV/c, (3) final publication of forward-angle differential cross sections for π - p → π 0 n at 101 to 147 MeV/c, and (4) continued development of analysis capabilities on the ACU VAX-11/785, including full implementation of the LAMPF Q system MAPPER and DISSPLA graphics software. TEDI and TEX word processing and the associated hardware to utilize the software. The experiments are conducted at the Clinton P. Anderson Meson Physics Facility at Los Alamos (LAMPF). The experiments are performed in collaboration with UCLA, George Washington University, LAMPF Groups MP-4, MP-10 and MP-13, and Catholic University. 37 refs., 13 figs., 1 tab

NTES laser facility for physics experiments

International Nuclear Information System (INIS)

Christie, D.J.; Foley, R.J.; Frank, D.N.

1989-01-01

This paper discusses the following topics on the NTES laser facility: Mission Statement and Project Description; Experiment Area; High-Energy, Double-Pass Laser; Facilities; Laser Control and Data Acquisition; and Auxiliary Lasers

Future neutrino oscillation facilities: physics priorities and open issues

International Nuclear Information System (INIS)

Blondel, Alain

2006-01-01

The recent discovery that neutrinos have masses opens a wide new field of experimentation. Accelerator-made neutrinos are essential in this program. Ideas for future facilities include Superbeam, Beta-beam, or Neutrino Factory, each associated with one or several options for detector systems. We now begin a 'scoping study' aimed at determining a set of key R and D projects enabling the community to propose an ambitious accelerator neutrino program at the turn of this decade. As an introduction to this study, a set of physics priorities, a summary of the perceived virtues and shortcomings of the various options, and a number of open questions are presented

Evaluating physical protection systems of licensed nuclear facilities using systems engineered inspection guidance

International Nuclear Information System (INIS)

Bradley, R.T.; Olson, A.W.; Rogue, F.; Scala, S.; Richard, E.W.

1980-01-01

The Lawrence Livermore National Laboratory (LLNL) and the US Nuclear Regulatory Commission (NRC) Office of Nuclear Regulatory Research (RES) have applied a systems engineering approach to provide the NRC Office of Inspection and Enforcement (IE) with improved methods and guidance for evaluating the physical protection systems of licensed nuclear facilities

IOTA (Integrable Optics Test Accelerator): facility and experimental beam physics program

Science.gov (United States)

Antipov, S.; Broemmelsiek, D.; Bruhwiler, D.; Edstrom, D.; Harms, E.; Lebedev, V.; Leibfritz, J.; Nagaitsev, S.; Park, C. S.; Piekarz, H.; Piot, P.; Prebys, E.; Romanov, A.; Ruan, J.; Sen, T.; Stancari, G.; Thangaraj, C.; Thurman-Keup, R.; Valishev, A.; Shiltsev, V.

2017-03-01

The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. The physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.

IOTA (Integrable Optics Test Accelerator): Facility and experimental beam physics program

International Nuclear Information System (INIS)

Antipov, Sergei; Broemmelsiek, Daniel; Bruhwiler, David; Edstrom, Dean; Harms, Elvin

2017-01-01

The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. Finally, the physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.

Summary of informal meeting on ''facilities for atomic physics research with highly ionized atoms''

International Nuclear Information System (INIS)

Cocke, C.L.; Jones, K.W.

1984-01-01

An informal meeting to discuss ''Facilities for Atomic Physics Research with Highly Ionized Atoms'' was held during the APS DEAP meeting at the University of Connecticut on May 30, 1984. The meeting was motivated by the realization that the status of facilities for studies of highly ionized atoms is unsettled and that it might be desirable to take action to ensure adequate resources for research over the whole range of charge states and energies of interest. It was assumed that the science to be done with these beams has been amply documented in the literature

Design features of a seven-cell high-gradient superconducting cavity

International Nuclear Information System (INIS)

Liska, D.J.; Ledford, J.; Black, S.; Spalek, G.; DiMarco, J.N.

1992-01-01

A cavity development program is in place at Los Alamos National Laboratory to evaluate structures that could be used to accelerate pions. The work is being guided by the conceptual design of PILAC, a high-gradient superconducting linac for raising the energy of rapidly decaying intense pion beams generated by Los Alamos Meson Physics Facility (LAMPF) to 1 GeV. The specification requires a cavity gradient of 12.5 MV/m at 805 MHz. The design of a seven-cell prototype cavity to achieve these high gradients has been completed by the Accelerator Technology division. The cavity is presently under procurement for high power testing a 2.0 K in 1993

Solution for remote handling in accelerator installations

International Nuclear Information System (INIS)

Burgerjon, J.J.; Ekberg, E.L.; Grisham, D.L.; Horne, R.A.; Meyer, R.E.; Flatau, C.R.; Wilson, K.B.

1977-01-01

A description is given of a remote-handling system designed for the Los Alamos Clinton P. Anderson Meson Physics Facility (LAMPF), versatile enough to be used in a variety of situations found around particle accelerators. The system consists of a bilateral (force-reflecting) servomanipulator installed on an articulated hydraulic boom. The boom also carries the necessary tools and observation devices. The whole slave unit can be moved by crane or truck to the area of operation. A control cable connects the slave unit with the control station, located at a safe distance in a trailer. Various stages of development as well as some operating experience are discussed

Sociospatial distribution of access to facilities for moderate and vigorous intensity physical activity in Scotland by different modes of transport

Directory of Open Access Journals (Sweden)

Lamb Karen E

2012-07-01

Full Text Available Abstract Background People living in neighbourhoods of lower socioeconomic status have been shown to have higher rates of obesity and a lower likelihood of meeting physical activity recommendations than their more affluent counterparts. This study examines the sociospatial distribution of access to facilities for moderate or vigorous intensity physical activity in Scotland and whether such access differs by the mode of transport available and by Urban Rural Classification. Methods A database of all fixed physical activity facilities was obtained from the national agency for sport in Scotland. Facilities were categorised into light, moderate and vigorous intensity activity groupings before being mapped. Transport networks were created to assess the number of each type of facility accessible from the population weighted centroid of each small area in Scotland on foot, by bicycle, by car and by bus. Multilevel modelling was used to investigate the distribution of the number of accessible facilities by small area deprivation within urban, small town and rural areas separately, adjusting for population size and local authority. Results Prior to adjustment for Urban Rural Classification and local authority, the median number of accessible facilities for moderate or vigorous intensity activity increased with increasing deprivation from the most affluent or second most affluent quintile to the most deprived for all modes of transport. However, after adjustment, the modelling results suggest that those in more affluent areas have significantly higher access to moderate and vigorous intensity facilities by car than those living in more deprived areas. Conclusions The sociospatial distributions of access to facilities for both moderate intensity and vigorous intensity physical activity were similar. However, the results suggest that those living in the most affluent neighbourhoods have poorer access to facilities of either type that can be reached on foot

Interaction physics in the context of ICF with the LIL facility

International Nuclear Information System (INIS)

Labaune, C.; Depierreux, S.; Riazuelo, G.; Tikhonchuk, V.T.; Stenz, C.; Nicolai, P.; Borisenko, N.G.; Hueller, S.

2010-01-01

Complete text of publication follows. Laser-plasma interaction physics is one of the main challenges of Inertial Confinement Fusion. Experiments in large-scale, high temperature, plasmas are needed to understand the physics of parametric instabilities, mainly the stimulated Brillouin and Raman scattering and filamentation. Experimental results obtained with well-defined interaction conditions are needed to test the numerical simulations still under development and to improve the target design. To be carried out with long length and high temperature plasmas, the experiments require multikilojoule laser beams, a careful choice of targets and sophisticated diagnostics. The LIL (Ligne d'Integration Laser) facility has been used with foam layer targets to study interaction physics in underdense plasma, in the millimeter scale, at temperature around 2 keV. The LIL facility delivers 12 kJ of 3σ light in pulses of 2.7 ns in a quadruplet. Low-density foams (3 to 10 mg/cc) with lengths in the range (300 μm, 1 mm) and very small microstructures (∼ μm) have been used. The plasma parameters, electron density, velocity, temperature profiles, were obtained from hydrodynamics simulations with the code CHIC and HERA. The numerical results were compared with the experimental measurements of longitudinal X-ray images at different times, the temporal evolution of the transmitted light through the foam, and the overall energy balance. Results will be presented on the beam propagation through the foam, plasma induced smoothing, the reduction of the imprint and stimulated Brillouin and Raman scattering. The interpretation of these results is achieved by means of various interaction codes, PARAX, HARMONY and HERA.

Hadron collider physics. Final report, February 1, 1991--January 31, 1994

International Nuclear Information System (INIS)

1994-01-01

This report contains summaries of work accomplished for Task A1 and A2 (Hadron Collider physics) and Task B. During the first half of the contract period work for Task A1 was focused on the design and implementation of both the D0 detector high voltage system and Level 1 muon trigger. During the second half the emphasis shifted to data analysis. For the major project of Task A2, OPAL, they have recorded and analyzed over one million decays of the Z 0 boson. They began participating in the RD5 experiment at the CERN SPS to study muon tracking in high energy collisions. The LSND experiment at LAMPF recorded physics data in the fall of 1993 and expects to report analysis results at upcoming conferences. In this three year period, the theory task, Task B, completed a number of projects, resulting in over 40 publications. The main emphasis of the research is on a better understanding of the fundamental interactions of quarks and leptons, and the possibility of physics beyond the standard model

Acceptance criteria for the evaluation of Category 1 fuel cycle facility physical security plans

Energy Technology Data Exchange (ETDEWEB)

Dwyer, P.A.

1991-10-01

This NUREG document presents criteria developed from US Nuclear Regulatory Commission regulations for the evaluation of physical security plans submitted by Category 1 fuel facility licensees. Category 1 refers to those licensees who use or possess a formula quantity of strategic special nuclear material.

Acceptance criteria for the evaluation of Category 1 fuel cycle facility physical security plans

International Nuclear Information System (INIS)

Dwyer, P.A.

1991-10-01

This NUREG document presents criteria developed from US Nuclear Regulatory Commission regulations for the evaluation of physical security plans submitted by Category 1 fuel facility licensees. Category 1 refers to those licensees who use or possess a formula quantity of strategic special nuclear material

Evaluation of effectiveness of physical protection systems at nuclear facilities in the Slovak Republic

International Nuclear Information System (INIS)

Stefulova, A.

2001-01-01

This paper contains a short presentation of the state supervision in approach to the evaluation of physical protection systems at the nuclear facilities as one kind of measure used to prevent combat illicit trafficking of nuclear and other radioactive materials in the Slovak Republic. (author)

Vulnerability Analysis for Physical Protection System at Hypothetical Facility of a Different Type Reactor

International Nuclear Information System (INIS)

Jung, Won-Moog; Kim, Jung-Soo; Kim, Jae-Kwang; Yoo, Ho-Sik; Kwak, Sung-Ho; Jang, Sung-Soon

2007-01-01

Since the 9/11 event in the U.S.A, International terror possibilities has been increased for nuclear facilities including nuclear power plants(NPPs). It is necessary to evaluate the performance of an existing physical protection system(PPS) at nuclear facilities based on such malevolent acts. Detection, delay, and response elements are all important to PPS. They are used for the analysis and evaluation of a PPS and its effectiveness. Methods are available to analyze a PPS and evaluate its effectiveness. Sandia National Laboratory(SNL) in the U.S.A developed a System Analysis of Vulnerability to Intrusion (SAVI) computer code for evaluating the effectiveness of PPS against outsider threats. This study presents the vulnerability analysis of the PPS at hypothetical facility of a different type using SAVI code that the basic input parameters are from PPS of a different type. For analysis, first, the site-specific Adversary Sequence Diagrams(ASDs) of the PPS is designed. It helps to understand the functions of the existing PPS composed of physical areas and Protection Elements(PEs). Then, the most vulnerable path of an ASD as a measure of effectiveness is determined. The results in the analysis can compare with the most vulnerable paths at a different type

Search for the neutrinoless muon decay μ+ → e+γ

International Nuclear Information System (INIS)

Wilson, S.L.

1985-07-01

Separate muon, electron, and tau numbers are conserved in the minimal standard model of electroweak interactions with massless neutrinos. However, in many extensions to the standard model, separate lepton numbers are not expected to be conserved quantities. A new search for muon number non-conserving processes has been undertaken at the Los Alamos Meson Physics Facility (LAMPF), specifically to look for three neutrinoless decay modes of the muon. The search for the decay of a muon to an electron and a photon is discussed here. A new detector facility, located in the LAMPF stopped muon channel, was developed for this experiment. This Crystal Box detector consists of a cylindrical drift chamber surrounded by a plastic scintillator hodoscope and a large solid angle, modularized, NaI(Tl) calorimeter. The apparatus measures the trajectories, relative timing, and energies of charged particles and photons from the decays of positive muons stopped in a central target. The assembly and calibration of the detector are described, and the procedure for taking data is discussed. The sample of 1.3 million candidate events, from the first data run of the Crystal Box, was analyzed using a maximum-likelihood method. The upper limit on the branching ratio, relative to normal muon decay, for a muon decaying to an electron and a photon is found to be consistent with previous measurements. With 90% confidence, the branching ratio for this neutrinoless decay is observed to be less than 2.8 x 10 10

Conceptual design of technical security systems for Russian nuclear facilities physical protection

International Nuclear Information System (INIS)

Izmailov, A.V.

1995-01-01

Conceptual design of technical security systems (TSS) used in the early stages of physical protection systems (PPS) design for Russia nuclear facilities is discussed. The importance of work carried out in the early stages was noted since the main design solutions are being made within this period (i.e. selection of a structure of TSS and its components). The methods of analysis and synthesis of TSS developed by ''Eleron'' (MINATOM of Russia) which take into account the specific conditions of Russian nuclear facilities and a scope of equipment available are described in the review. TSS effectiveness assessment is based on a probability theory and a simulation. The design procedure provides for a purposeful choice of TSS competitive options including a ''cost-benefit'' criterion and taking into account a prechosen list of design basis threats to be used for a particular facility. The attention is paid to a practical aspect of the methods application as well as to the bilateral Russian-American scientific and technical co-operation in the PPS design field

Overview of new, upgraded, or proposed high energy physics facilities in the United States and Canada

International Nuclear Information System (INIS)

Gabriel, T.A.

1994-01-01

This article reviews six new, proposed, or upgraded accelerator facilities in the United States and Canada. All of the accelerators that are presented here in one form or fashion challenge the validity of the Standard Model of high energy physics which ''currently explains'' all experimentally know phenomena. These facilities include the Continuous Electron Beam Accelerator Facility (CEBAF) at Newport News, Virginia, the Kaon Factory at TRIUMF in Vancouver, British Columbia, Canada, the Asymmetric B Factory at the Stanford Linear Accelerator Center (SLAC) in Palo Alto, California, the Relativistic Heavy Ion Collider (RHIC) facility at Brookhaven National Laboratory in Upton, New York, the injector upgrade project at the Fermi National Accelerator Laboratory (FNAL) in Batavia, Illinois, and the Superconducting Super Collider Laboratory (SSCL) in Waxachachie, Texas

The association between high recreational physical activity and physical activity as a part of daily living in adolescents and availability of local indoor sports facilities and sports clubs.

Science.gov (United States)

Niclasen, Birgit; Petzold, Max; Schnohr, Christina W

2012-11-01

The aim of this study was to examine how vigorous physical activity (recreational physical activity) (VPA) and moderate to vigorous physical activity as a part of daily life (MVPA) is associated with structural characteristics (availability of sports facilities and sports clubs with child members) in Greenlandic adolescents. Data from the 2006 Health Behaviour in School-aged Children survey including 2,430 children aged 11-17 years was used. Logistic regression models were developed with dichotomous measures on VPA and MVPA as outcomes, number of indoor sports facilities and of sports clubs with child members as independent variables, and adjusted for age, gender, family affluence (FAS), and type of habitation (capital, town or village). High VPA increased with access to indoor facilities, while high MVPA was less likely (odds ratio (OR) 0.54 (0.42-0.70)) if indoor sports facilities were present, both unadjusted and adjusted. Access to a local sports club increased OR for high VPA both unadjusted and adjusted to about 2.3 for five or more clubs, while access to sports clubs was not associated with unadjusted MVPA, negatively associated if adjusted for age, gender and FAS but positively associated if also adjusted for indoor sports facilities. Access to indoor sports facilities itself had a positive association with high VPA, but was persistently negatively associated with high MVPA. Presence of sports clubs with child members was positively associated with high VPA while the association with high MVPA was more complex. The findings have implications for public health planning.

Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

2000-05-01

This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licencee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

2002-05-01

This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licensee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

Educational intervention on physical restraint use in long-term care facilities - Systematic review and meta-analysis.

Science.gov (United States)

Lan, Shao-Huan; Lu, Li-Chin; Lan, Shou-Jen; Chen, Jong-Chen; Wu, Wen-Jun; Chang, Shen-Peng; Lin, Long-Yau

2017-08-01

"Physical restraint" formerly used as a measure of protection for psychiatric patients is now widely used. However, existing studies showed that physical restraint not only has inadequate effect of protection but also has negative effects on residents. To analyzes the impact of educational program on the physical restraint use in long-term care facilities. A systematic review with meta-analysis and meta-regression. Eight databases, including Cochrane Library, ProQuest, PubMed, EMBASE, EBSCO, Web of Science, Ovid Medline and Physiotherapy Evidence Database (PEDro), were searched up to January 2017. Eligible studies were classified by intervention and accessed for quality using the Quality Assessment Tool for quantitative studies. Sixteen research articles were eligible in the final review; 10 randomize control trail studies were included in the analysis. The meta-analysis revealed that the use of physical restraint was significantly less often in the experimental (education) group (OR = 0.55, 95% CI: 0.39 to 0.78, p education would have decreased the effect of the restraint educational program (β: 0.08, p = 0.002); instead, the longer education period and more times of education would have a stronger effect of reducing the use of physical restraint (β: -0.07, p educational program had an effect on the reduced use of physical restraint. The results of meta-regression suggest that long-term care facilities should provide a continuous education program of physical restraint for caregivers. Copyright © 2017. Published by Elsevier Taiwan.

Experimental investigations in particle physics at intermediate energies

International Nuclear Information System (INIS)

Auerbach, L.B.; Highland, V.L.; Martoff, C.J.; McFarlane, K.W.; Guss, C.; Kettell, S.

1991-01-01

The major elements of this project continues to be on fundamental symmetries and parameters of the Standard Model. The projects in the current period have been BNL E791 (a search for the decay K L 0 → μe, which would violate the rule of separate lepton number conservation), test of an upgrade proposal (E871), and LSND, a neutrino experiment at LAMPF. For E791, data taking was completed in June 1990, and preliminary results are now available for the decays K L 0 → μe and K L 0 → μμfrom the entire data set. The data for decay K L 0 → ee are still being analysed. These are an upper limit for the branching fraction for K L 0 → μe of 3.5 x 10 -11 (90% C.L.). From the 1990 data alone, we have a new (preliminary) value of the branching fraction for K L 0 → μμ of (6.96±0. 4±0.22) x 10 -9 , with a sample of 349 events. Combining this with earlier data gives (6.96±0.34) x 10 9 , by far the most precise value. The limit on the decay K L 0 → μe places a lower limit on the mass of a new particle mediating such decays of 85 TeV. The LSND (Large Scintillator Neutrino Detector), a search for neutrino oscillations at LAMPF, has been approved, and is now underway. Other neutrino work at Los Alamos, E764, has resulted in a final publication. This includes the best, measurement of ν-nuclear scattering, in ν mu 12 C inclusive cross sections. The measurement of the cross section for the exclusive reaction ν mu12 C → μ -12 N is unique. In a new development, Dr. Martoff has established a facility for fabrication of superconducting detectors of nuclear radiation; the equipment has been funded and is partly installed. Planned uses include scattering for 'Dark Matter.' In summary, the objectives for this year have been met

Physics constraints on the design of fast reactor safety test facilities

International Nuclear Information System (INIS)

Travelli, A.; Meneghetti, D.; Matos, J.; Snelgrove, J.; Shaftman, D.H.; Tzanos, C.; Lam, S.K.; Pennington, E.M.; Woodruff, W.L.

1976-01-01

This paper discusses the physics foundations common to all fast reactor safety test facilities and the constraints which they impose on the design. While detailed design discussions are confined to the experience with six ANL designs, available data from other designs are used to confirm the validity of the considerations and to broaden the scope of the discussion. This helps to view the various designs as a unified effort, to define their potential capabilities, and to assess how they could best complement each other

Jupiter Laser Facility

Data.gov (United States)

Federal Laboratory Consortium — The Jupiter Laser Facility is an institutional user facility in the Physical and Life Sciences Directorate at LLNL. The facility is designed to provide a high degree...

Radiation and physical protection challenges at advanced nuclear fuel cycle facilities

International Nuclear Information System (INIS)

Pickett, Susan E.

2008-01-01

Full text: The purpose of this study is to examine challenges and opportunities for radiation protection in advanced nuclear reactors and fuel facilities proposed under the Generation IV (GEN IV) initiative which is examining and pursuing the exploration and development of advanced nuclear science and technology; and the Global Nuclear Energy Partnership (GNEP), which seeks to develop worldwide consensus on enabling expanded use of economical, carbon-free nuclear energy to meet growing energy demand. The International Energy Agency projects nuclear power to increase at a rate of 1.3 to 1.5 percent a year over the next 20 years, depending on economic growth. Much of this growth will be in Asia, which, as a whole, currently has plans for 40 new nuclear power plants. Given this increase in demand for new nuclear power facilities, ranging from light water reactors to advanced fuel processing and fabrication facilities, it is necessary for radiation protection and physical protection technologies to keep pace to ensure both worker and public health. This paper is based on a review of current initiatives and the proposed reactors and facilities, primarily the nuclear fuel cycle facilities proposed under the GEN IV and GNEP initiatives. Drawing on the Technology Road map developed under GEN IV, this work examines the potential radiation detection and protection challenges and issues at advanced reactors, including thermal neutron spectrum systems, fast neutron spectrum systems and nuclear fuel recycle facilities. The thermal neutron systems look to improve the efficiency of production of hydrogen or electricity, while the fast neutron systems aim to enable more effective management of actinides through recycling of most components in the discharged fuel. While there are components of these advanced systems that can draw on the current and well-developed radiation protection practices, there will inevitably be opportunities to improve the overall quality of radiation

Design of a target and moderator at the Los Alamos Spallation Radiation Effects Facility (LASREF) as a neutron source for fusion reactor materials development

International Nuclear Information System (INIS)

Ferguson, P.D.; Mueller, G.E.

1993-01-01

The LASREF facility is located in the beam stop area at LAMPF. The neutron spectrum is fission-like with the addition of a 3% to 5% component with E > 20 MeV. The present study evaluates the limits on geometry and material selection that will maximize the neutron flux. MCNP and LAHET were used to predict the neutron flux and energy spectrum for a variety of geometries. The problem considers 760 MeV protons incident on tungsten. The resulting neutrons are multiplied in uranium through (n,xn) reactions. Calculations show that a neutron flux greater than 10 19 n/m 2 /s is achievable. The helium to dpa ratio and the transmutation product generation are calculated. These results are compared to expectations for the proposed DEMO fusion reactor and to FFTF

Health physics manual of good practices for accelerator facilities

International Nuclear Information System (INIS)

Casey, W.R.; Miller, A.J.; McCaslin, J.B.; Coulson, L.V.

1988-04-01

It is hoped that this manual will serve both as a teaching aid as well as a useful adjunct for program development. In the context of application, this manual addresses good practices that should be observed by management, staff, and designers since the achievement of a good radiation program indeed involves a combined effort. Ultimately, radiation safety and good work practices become the personal responsibility of the individual. The practices presented in this manual are not to be construed as mandatory rather they are to be used as appropriate for the specific case in the interest of radiation safety. As experience is accrued and new data obtained in the application of this document, ONS will update the guidance to assure that at any given time the guidance reflects optimum performance consistent with current technology and practice.The intent of this guide therefore is to: define common health physics problems at accelerators; recommend suitable methods of identifying, evaluating, and managing accelerator health physics problems; set out the established safety practices at DOE accelerators that have been arrived at by consensus and, where consensus has not yet been reached, give examples of safe practices; introduce the technical literature in the accelerator health physics field; and supplement the regulatory documents listed in Appendix D. Many accelerator health physics problems are no different than those at other kinds of facilities, e.g., ALARA philosophy, instrument calibration, etc. These problems are touched on very lightly or not at all. Similarly, this document does not cover other hazards such as electrical shock, toxic materials, etc. This does not in any way imply that these problems are not serious. 160 refs

Atomic physics at the future facility for antiproton and ion research: status report 2014

International Nuclear Information System (INIS)

Gumberidze, A; Stöhlker, Th; Litvinov, Yu A

2015-01-01

In this contribution, a brief overview of the Stored Particle Atomic physics Research Collaboration scientific program at the upcoming Facility for Antiproton and Ion Research (FAIR) is given. The program comprises a very broad range of research topics addressing atomic structure and dynamics in hitherto unexplored regimes, light–matter interactions, lepton pair production phenomena, precision tests of quantum electrodynamics and standard model in the regime of extreme fields and many more. We also present the current strategy for the realization of the envisioned physics program within the modularized start version (MSV) of FAIR. (paper)

Neutrino Physics at Fermilab

International Nuclear Information System (INIS)

Federspiel, F.; Garvey, G.; Louis, W.C.; Mills, G.B.; Tayloe, R.; Sandberg, V.; Sapp, B.; White, D.H.

1999-01-01

The Liquid Scintillator Neutrino Detector (LSND), located at the LANSCE (formerly LAMPF) linear accelerator at Los Alamos National Laboratory, has seen evidence for the oscillation of neutrinos, and hence neutrino mass. That discovery was the impetus for this LDRD project, begun in 1996. The goal of this project was to define the appropriate technologies to use in a follow up experiment and to set in place the requirements for such an experiment

Perspectives for photonuclear research at the Extreme Light Infrastructure - Nuclear Physics (ELI-NP) facility

Energy Technology Data Exchange (ETDEWEB)

Filipescu, D.; Balabanski, D.L.; Constantin, P.; Gales, S.; Tesileanu, O.; Ur, C.A.; Ursu, I.; Zamfir, N.V. [Horia Hulubei National Institute for R and D in Physics and Nuclear Engineering (IFIN-HH), Extreme Light Infrastructure - Nuclear Physics (ELI-NP), Bucharest-Magurele (Romania); Anzalone, A.; La Cognata, M.; Spitaleri, C. [INFN-LNS, Catania (Italy); Belyshev, S.S. [Lomonosov Moscow State University, Physics Faculty, Moscow (Russian Federation); Camera, F. [Departement of Physics, University of Milano, Milano (Italy); INFN section of Milano, Milano (Italy); Csige, L.; Krasznahorkay, A. [Hungarian Academy of Sciences (MTA Atomki), Institute of Nuclear Research, Post Office Box 51, Debrecen (Hungary); Cuong, P.V. [Vietnam Academy of Science and Technology, Centre of Nuclear Physics, Institute of Physics, Hanoi (Viet Nam); Cwiok, M.; Dominik, W.; Mazzocchi, C. [University of Warsaw, Warszawa (Poland); Derya, V.; Zilges, A. [University of Cologne, Institute for Nuclear Physics, Cologne (Germany); Gai, M. [University of Connecticut, LNS at Avery Point, Connecticut, Groton (United States); Gheorghe, I. [Horia Hulubei National Institute for R and D in Physics and Nuclear Engineering (IFIN-HH), Extreme Light Infrastructure - Nuclear Physics (ELI-NP), Bucharest-Magurele (Romania); University of Bucharest, Nuclear Physics Department, Post Office Box MG-11, Bucharest-Magurele (Romania); Ishkhanov, B.S. [Lomonosov Moscow State University, Physics Faculty, Moscow (Russian Federation); Lomonosov Moscow State University, Skobeltsyn Institute of Nuclear Physics, Moscow (Russian Federation); Kuznetsov, A.A.; Orlin, V.N.; Stopani, K.A.; Varlamov, V.V. [Lomonosov Moscow State University, Skobeltsyn Institute of Nuclear Physics, Moscow (Russian Federation); Pietralla, N. [Technische Universitat Darmstadt, Institut fur Kernphysik, Darmstadt (Germany); Sin, M. [University of Bucharest, Nuclear Physics Department, Post Office Box MG-11, Bucharest-Magurele (Romania); Utsunomiya, H. [Konan University, Department of Physics, Kobe (Japan); University of Tokyo, Center for Nuclear Study, Saitama (Japan); Weller, H.R. [Triangle Universities Nuclear Laboratory, North Carolina, Durham (United States); Duke University, Department of Physics, North Carolina, Durham (United States)

2015-12-15

The perspectives for photonuclear experiments at the new Extreme Light Infrastructure - Nuclear Physics (ELI-NP) facility are discussed in view of the need to accumulate novel and more precise nuclear data. The parameters of the ELI-NP gamma beam system are presented. The emerging experimental program, which will be realized at ELI-NP, is presented. Examples of day-one experiments with the nuclear resonance fluorescence technique, photonuclear reaction measurements, photofission experiments and studies of nuclear collective excitation modes and competition between various decay channels are discussed. The advantages which ELI-NP provides for all these experiments compared to the existing facilities are discussed. (orig.)

Physical Protection of Nuclear Material and Nuclear Facilities (Implementation of INFCIRC/225/Revision 5). Implementing Guide

International Nuclear Information System (INIS)

2018-01-01

This publication is the lead Implementing Guide in a suite of guidance on implementing the Nuclear Security Recommendations on Physical Protection of Nuclear Material and Nuclear Facilities (INFCIRC/225/Revision 5), IAEA Nuclear Security Series No. 13. It provides guidance and suggestions to assist States and their competent authorities in establishing, strengthening and sustaining their national physical protection regime and implementing the associated systems and measures, including operators’ physical protection systems. The structure of this publication is as follows. After this introduction, Section 2 describes the objectives of physical protection and the overall approach to managing the risks of the unauthorized removal of nuclear material and the sabotage of nuclear facilities. Section 3 provides guidance for the State and its competent authorities on the physical protection elements of the nuclear security regime; this guidance is based on the fundamental principles set out in the Recommendations publication. Section 4 provides guidance on the operator’s physical protection system and describes a systematic, integrated approach. Appendix I gives an annotated outline of the typical contents of an operator’s security plan. Appendix II provides similar guidance for the contingency plan. Appendix III provides a description of nuclear material aggregation that can be used to categorize nuclear material and determine the appropriate level of protection against unauthorized removal. Appendix IV presents a table of paragraph cross-references between the Recommendations publication and this Implementing Guide.

ANKE, a new facility for medium energy hadron physics at COSY-Juelich

International Nuclear Information System (INIS)

Barsov, S.; Bechstedt, U.; Bothe, W.; Bongers, N.; Borchert, G.; Borgs, W.; Braeutigam, W.; Buescher, M.; Cassing, W.; Chernyshev, V.; Chiladze, B.; Dietrich, J.; Drochner, M.; Dymov, S.; Erven, W.; Esser, R.; Franzen, A.; Golubeva, Ye.; Gotta, D.; Grande, T.; Grzonka, D.; Hardt, A.; Hartmann, M.; Hejny, V.; Horn, L. van; Jarczyk, L.; Junghans, H.; Kacharava, A.; Kamys, B.; Khoukaz, A.; Kirchner, T.; Klehr, F.; Klein, W.; Koch, H.R.; Komarov, V.I.; Kondratyuk, L.; Koptev, V.; Kopyto, S.; Krause, R.; Kravtsov, P.; Kruglov, V.; Kulessa, P.; Kulikov, A.; Lang, N.; Langenhagen, N.; Lepges, A.; Ley, J.; Maier, R.; Martin, S.; Macharashvili, G.; Merzliakov, S.; Meyer, K.; Mikirtychiants, S.; Mueller, H.; Munhofen, P.; Mussgiller, A.; Nekipelov, M.; Nelyubin, V.; Nioradze, M.; Ohm, H.; Petrus, A.; Prasuhn, D.; Prietzschk, B.; Probst, H.J.; Pysz, K.; Rathmann, F.; Rimarzig, B.; Rudy, Z.; Santo, R.; Paetz Schieck, H.; Schleichert, R.; Schneider, A.; Schneider, Chr.; Schneider, H.; Schwarz, U.; Seyfarth, H.; Sibirtsev, A.; Sieling, U.; Sistemich, K.; Selikov, A.; Stechemesser, H.; Stein, H.J.; Strzalkowski, A.; Watzlawik, K.-H.; Wuestner, P.; Yashenko, S.; Zalikhanov, B.; Zhuravlev, N.; Zwoll, K.; Zychor, I.; Schult, O.W.B.; Stroeher, H.

2001-01-01

ANKE is a new experimental facility for the spectroscopy of products from proton-induced reactions on internal targets. It has recently been implemented in the accelerator ring of the cooler synchrotron COSY of the Forschungszentrum Juelich (FZ-Juelich), Germany. The device consists of three dipole magnets, various target installations and dedicated detection systems. It will enable a variety of hadron-physics experiments like meson production in elementary proton-nucleon processes and studies of medium modifications in proton-nucleus interactions

Safety of sports facilities and training of graduates in physical education.

Science.gov (United States)

Romano Spica, V; Giampaoli, S; Di Onofrio, V; Liguori, G

2015-01-01

Post-industrial societies have to face the problem of physical inactivity and inappropriate lifestyles. Programs to promote physical activity are strongly supported by supranational, national and local institutions and organizations. These programs can be developed in sport facilities but also in places that are not institutionally dedicated to sport. The use of urban and working sites has the advantage of better reach the various segments of the population, but at the same time requires coordination between various professionals in structuring an effective intervention. Bibliographical research in the historical archives of the library of the University of Rome Foro Italico, online databases, paleoigiene (wikigiene), documents archives (GSMS-SItI, WHO, ISS, OsEPi, INAIL, ISTAT, national laws). Several guidelines and regulations face the problem of safety in sport environments. The context is in rapid evolution and directions are provided by public health authorities. Graduates in Sport and Physical Activity, represent an additional resource in terms of: prevention and safety in the workplace, health education, application of preventive and adapted physical activities in the territory. These tasks can be integrated in all prevention stages: e.g. childhood and primary prevention programs in school, adapted physical activity for the elderly. The contribution of public health specialists is strategic in the surveillance and coordination of integrated projects. At the same time, graduates in Physical Education appear to be pivots for health promotion and qualified resources for institutions in the territory. Their training should always include contents related to prevention and safety, regulations on sport and working environments, along with bases of preventive medicine related to the context of physical activity.

Report of the 1983 HEPAP Subpanel on New Facilities for the US high-energy physics program

International Nuclear Information System (INIS)

1983-07-01

The 1983 Subpanel on New Facilities of the High Energy Physics Advisory Panel (HEPAP) was formed in February 1983 and completed its report in July 1983. During the intervening 5 months the Subpanel held site meetings at three major accelerator laboratories, heard formal presentations from a number of prominent physicists, received almost 200 letters from members of the high energy physics community, and studied in depth all of the relevant written material. The final recommendations were arrived at after two lengthy deliberative meetings held in June and July at the National Academy of Sciences (NAS) Study Center at Woods Hole, Massachusetts, and at the Nevis Laboratory, Columbia University. The recommendations arrived at by the Subpanel are as follows: (1) the Subpanel unanimously recommends the immediate initiation of a multi-TeV high-luminosity proton-proton collider project with the goal of physics experiments at this facility at the earliest possible date; (2) the Subpanel recommends the rapid completion of current construction projects, Tevatron and the SLAC Linear Collider (SLC), the upgrading of the Cornell Electron Storage Ring (CESR) and associated detectors, and the thorough utilization of all existing facilities; (3) the Subpanel recommends that Fermilab not proceed at this time with the Dedicated Collider (DC); (4) by a majority vote, the Subpanel recommends that the Colliding Beam Accelerator (CBA) project at Brookhaven not be approved; (5) the Subpanel recommends that technology research and development, particularly advanced accelerator research and development, be strongly supported

A search for bar νe appearance from stopped π+ and μ+ decay at LAMPF

International Nuclear Information System (INIS)

Fujikawa, B.K.

1990-01-01

The author reports on a recent search for bar ν e appearance from stopped π + → μ + ν μ and μ + → e + ν e bar ν μ decay made by the LAMPF experiment E645. The appearance of bar ν e may occur from bar ν μ → bar ν e , ν e → bar ν eL , or ν μ → bar ν eL oscillations. Appearance may also occur from rare μ + → e + bar ν e ν μ decay, which is allowed by a multiplicative lepton charge conservation law. The neutrino energies range from E ν = 0 to 52.8MeV. The neutrino detector, which is located 26.1 meters from the neutrino source, consists of a segmented liquid scintillator and proportional drift tube central detector surrounded by both active and passive shielding. The central detector detects bar ν e through the bar ν e p → ne + Charge Current (CC) reaction, which is signaled by the direct detection of the final state positron and neutron. The hydrogen-rich liquid scintillators act as free proton targets for the bar ν e p CC reaction. The neutrons are detected through radiative neutron capture on gadolinium. He finds no evidence for bar ν e appearance in the first year of running. New limits on the bar ν μ , ν e , ν μ yields bar ν e oscillation parameters and the rare μ + → e + bar ν e ν μ decay branching ratio are presented

European network for promoting the physical health of residents in psychiatric and social care facilities (HELPS)

DEFF Research Database (Denmark)

Weiser, Prisca; Becker, Thomas; Losert, Carolin

2009-01-01

of defined health promoting interventions. The key methods are (a) stakeholder analysis, (b) international literature reviews, (c) Delphi rounds with experts from participating centres, and (d) focus groups with staff and residents of mental health care facilities.Meanwhile a multi-disciplinary network...... by promoting behaviour-based and/or environment-based interventions. METHODS AND DESIGN: HELPS is an interdisciplinary European network that aims at (i) gathering relevant knowledge on physical illness in people with mental illness, (ii) identifying health promotion initiatives in European countries that meet...... consisting of 15 European countries has been established and took up the work. As one main result of the project they expect that a widespread use of the HELPS toolkit could have a significant positive effect on the physical health status of residents of mental health and social care facilities, as well...

Status of helium-production reaction studies with a spallation neutron source

International Nuclear Information System (INIS)

Haight, R.C.; Bateman, F.B.; Chadwick, M.B.

1994-01-01

Alpha--particle production cross sections and spectra are being measured at the spallation source of fast neutrons at the Los Alamos Meson Physics Facility (LAMPF). Detectors at angles of 30, 60, 90 and 135 degree are used to identify alpha particles, measure their energy spectra, and indicate the time-of-flight, and hence the energy, of the neutrons inducing the reaction. The useful neutron energy ranges from less than 1 MeV to approximately 50 MeV for the present experimental setup. Targets under study at present include C, N, O, 27 Al, Si, 51 V, 56 Fe, 59 Co, 58,60 Ni, 89 Y and 93 Nb. Results for 59 Co illustrate the capabilities of the approach

Data display with the Q system

International Nuclear Information System (INIS)

Oothoudt, M.A.

1979-01-01

The Q data-acquisition system for PDP-11 mini-computers at the Clinton P. Anderson Meson Physics Facility (LAMPF) provides experimenters with basic tools for on-line data display. Tasks are available to plot one- and two-parameter histograms on Tektronix 4000 series storage-tube terminals. The histograms to be displayed and the display format may be selected with simple keyboard commands. A task is also available to create and display live two-parameter scatter plots for any acquired or calculated quantities. Other tasks in the system manage the display data base, list display parameters and histogram contents on hardcopy devices, and save core histograms on disk or tape for off-line analysis. 8 figures

TPC spectrometer for measuring the e+ spectrum in μ decay

International Nuclear Information System (INIS)

Kinnison, W.W.

1983-01-01

The Time Projection Chamber (TPC) being used at the Los Alamos Meson Physics Facility (LAMPF) for a high-statistics normal muon-decay experiment is described. It is shown how the experiment will improve upon the limits of the weak-interaction coupling constants by a factor of 5 through the measurement of the positron momentum and direction of emission with respect to the muon-polarization vector for 10 8 decays of stopped, polarized, positive muons. The TPC apparatus is described, and it is shown that even though more work is to be done to improve the detector acceptance and individual coordinate resolutions, for certain track topologies, the TPC already has a momentum resolution of 0.7% (sigma)

Radioactivity, shielding, radiation damage, and remote handling

International Nuclear Information System (INIS)

Wilson, M.T.

1975-01-01

Proton beams of a few hundred million electron volts of energy are capable of inducing hundreds of curies of activity per microampere of beam intensity into the materials they intercept. This adds a new dimension to the parameters that must be considered when designing and operating a high-intensity accelerator facility. Large investments must be made in shielding. The shielding itself may become activated and require special considerations as to its composition, location, and method of handling. Equipment must be designed to withstand large radiation dosages. Items such as vacuum seals, water tubing, and electrical insulation must be fabricated from radiation-resistant materials. Methods of maintaining and replacing equipment are required that limit the radiation dosages to workers.The high-intensity facilities of LAMPF, SIN, and TRIUMF and the high-energy facility of FERMILAB have each evolved a philosophy of radiation handling that matches their particular machine and physical plant layouts. Special tooling, commercial manipulator systems, remote viewing, and other techniques of the hot cell and fission reactor realms are finding application within accelerator facilities. (U.S.)

Simulated physical inventory verification exercise at a mixed-oxide fuel fabrication facility

International Nuclear Information System (INIS)

Reilly, D.; Augustson, R.

1985-01-01

A physical inventory verification (PIV) was simulated at a mixed-oxide fuel fabrication facility. Safeguards inspectors from the International Atomic Energy Agency (IAEA) conducted the PIV exercise to test inspection procedures under ''realistic but relaxed'' conditions. Nondestructive assay instrumentation was used to verify the plutonium content of samples covering the range of material types from input powders to final fuel assemblies. This paper describes the activities included in the exercise and discusses the results obtained. 5 refs., 1 fig., 6 tabs

Radiation effects at a high power accelerator and applications to advanced energy sources

International Nuclear Information System (INIS)

Sommer, W.F.; Garner, F.A.; Brown, R.D.; Wechsler, M.S.

1989-01-01

Many materials are exposed to atom-displacing radiation at high-power accelerators such as the Los Alamos Meson Physics Facility (LAMPF). Beam current densities in the 800-MeV proton beam vary from 12.5 mA cm -2 (8 x 10 16 p/cm 2 s) on graphite targets to 20-μA cm -2 (1.3 x 10 14 p/cm 2 s) on metal-alloy windows. High-level radiation damage results from these particle fluxes. As a consequence of secondary-particle generation in targets and windows and low-level beam losses that lead to particle interactions with structural material, various components are exposed to low-level proton fluxes, gamma radiation, and neutron fluxes of 10 6 --10 10 n/cm 2 s. These include vacuum seals and vacuum chambers of stainless steel and aluminum alloys, solid-state devices for control, diagnostic, and data acquisition electronics, closed-loop cooling-water systems, and insulators. Properties of these materials are degraded by the radiation exposure. Studies of LAMPF and other accelerators, however, have produced solutions to materials problems, allowing the machines to operate for acceptable times without failure. Nevertheless, additional improvements are being investigated in order to further improve operational reliability and safety. 25 refs., 3 figs., 3 tabs

Irradiation facilities at the Los Alamos Meson Physics Facility

International Nuclear Information System (INIS)

Sandberg, V.

1990-01-01

The irradiation facilities for testing SSC components and detector systems are described. Very high intensity proton, neutron, and pion fluxes are available with beam kinetic energies of up to 800 MeV. 4 refs., 12 figs., 2 tabs

Validation of secondary commercial data sources for physical activity facilities in urban and nonurban settings.

Science.gov (United States)

Han, Euna; Powell, Lisa; Slater, Sandy; Quinn, Christopher

2012-11-01

Secondary data are often necessary to assess the availability of commercial physical activity (PA) facilities and examine its association with individual behaviors and outcomes, yet the validity of such sources has been explored only in a limited number of studies. Field data were collected on the presence and attributes of commercial PA facilities in a random sample of 30 urban, 15 suburban, and 15 rural Census tracts in the Chicago metropolitan statistical area and surrounding area. Approximately 40% of PA establishments in the field data were listed for both urban and nonurban tracts in both lists except for nonurban tracts in D&B (35%), which was significantly improved in the combined list of D&B and InfoUSA. Approximately one-quarter of the PA facilities listed in D&B were found on the ground, whereas 40% to 50% of PA facilities listed in InfoUSA were found on the ground. PA establishments that offered instruction programs or lessons or that had a court or pool were less likely to be listed, particularly in the nonurban tracts. Secondary commercial business lists on PA facilities should be used with caution in assessing the built environment.

The physical environment, activity and interaction in residential care facilities for older people: a comparative case study.

Science.gov (United States)

Nordin, Susanna; McKee, Kevin; Wallinder, Maria; von Koch, Lena; Wijk, Helle; Elf, Marie

2017-12-01

The physical environment is of particular importance for supporting activities and interactions among older people living in residential care facilities (RCFs) who spend most of their time inside the facility. More knowledge is needed regarding the complex relationships between older people and environmental aspects in long-term care. The present study aimed to explore how the physical environment influences resident activities and interactions at two RCFs by using a mixed-method approach. Environmental assessments were conducted via the Swedish version of the Sheffield Care Environment Assessment Matrix (S-SCEAM), and resident activities, interactions and locations were assessed through an adapted version of the Dementia Care Mapping (DCM). The Observed Emotion Rating Scale (OERS) was used to assess residents' affective states. Field notes and walk-along interviews were also used. Findings indicate that the design of the physical environment influenced the residents' activities and interactions. Private apartments and dining areas showed high environmental quality at both RCFs, whereas the overall layout had lower quality. Safety was highly supported. Despite high environmental quality in general, several factors restricted resident activities. To optimise care for older people, the design process must clearly focus on accessible environments that provide options for residents to use the facility independently. © 2016 The Authors. Scandinavian Journal of Caring Sciences published by John Wiley & Sons Ltd on behalf of Nordic College of Caring Science.

Physical Facilities for Holistic Education: Lessons from Secondary Schools in Kiambu and Samburu Counties, Kenya

Science.gov (United States)

Ndirangu, Waweru Peter; Thinguri, Ruth; Chui, Mary Mugwe

2016-01-01

This paper is premised on the background that the majority of researchers and educationists who have contributed to the discourse on education for sustainability seem to be in agreement that management of physical facilities are critical ingredients in achieving holistic and sustainable education. The study examined the application of physical…

Discussion of the use of the Dragon reactor as a facility for integral reactor physics experiments

Energy Technology Data Exchange (ETDEWEB)

Gutmann, H

1972-06-05

The purpose and use of the Dragon Reactor Experiment (DRE) has changed considerably during the years of its operation. The original purpose was to show that the principle of a High Temperature Reactor is sound and demonstrate its operation. After this achievement, the purpose of the Dragon reactor changed to the use as a fuel testing facility. During recent years, a new use of the DRE has been added to its use as a fuel testing facility, namely Fuel Element Design Testing. The current report covers reactor physics experiments aspects.

Transitionless lattices for LAMPF II

International Nuclear Information System (INIS)

Franczak, B.J.

1984-10-01

Some techniques are described for the design of synchrotron lattices that have zero dispersion in the straight sections and/or imaginary transition energy (negative momentum-compaction factor) but no excessive amplitudes of the dispersion function. Included as an application is a single-stage synchrotron, with variable optics, that has different ion-optical properties at injection and extraction but requires a complex way of programming the quadrupoles. In addition, a two-stage facility consisting of a 45-GeV synchrotron of 1100-m circumference and a 9-GeV booster of half that size is presented. As alternates to these separated-function lattices, some combined-function modules are given that can be used to construct a synchrotron with similar properties

European Facility for Antiproton and Ion Research (FAIR): the new international center for fundamental physics and its research program

International Nuclear Information System (INIS)

Fortov, Vladimir E; Sharkov, Boris Yu; Stöker, H

2012-01-01

The Facility for Antiproton and Ion Research (FAIR) accelerator center at Darmstadt, Germany, will provide the international scientific community with unique experimental opportunities of a scope and scale out of reach for any other large-scale facility in the world. With its staff of over 2500, it is expected to fundamentally expand our knowledge of hadron, nuclear, and atomic physics and their application to cosmology, astrophysics, and technology. In this review, the design details of the accelerator complex are discussed and the experimental research program for FAIR is presented. Particular attention is paid to experiments on the extreme state of matter arising from the isochoric heating of a material by heavy-ion beams. One of the largest facilities of its kind in Europe, FAIR is a part of the strategic development roadmap for the European Strategic Forum on Research Infrastructures (ESFRI). (physics of our days)

Science driving facilities for particle physics

CERN Multimedia

2011-01-01

This week, CERN played host to the 10th ICFA (International Committee for Future Accelerators) seminar, which brought together some 200 scientists, government agency representatives and lab directors from around the world to take the pulse of our field. ICFA seminars take place every three years, and this time the emphasis was on science as the driving force for facilities.   The theme of this year’s seminar could not have been more timely. With austerity the global norm, it is more important than ever for science to point the way to the facilities we need, and for the global community to ensure that those facilities are planned at the global level. The LHC is already a machine for the world, and although CERN’s Member States have carried the bulk of the cost, it would not have been possible without contributions from around the globe. In the US, Fermilab’s focus has moved away from the high-energy frontier to the intensity frontier, which is every bit as impor...

Status of RIB facilities in Asia

International Nuclear Information System (INIS)

Tanihata, Isao

1998-01-01

Radioactive Ion Beam Facilities in Asia are presented. In China, in-flight separation type facilities are in operation at the Institute of Modern Physics in Lanzhou and the other at Tandem facility in China Institute of Atomic Energy in Beijing. The storage-ring facility is proposed and approved in Lanzhou. In India, the Variable Energy Cyclotron Facility in Calcutta start to construct an ISOL-type facility. In Japan, in-flight separation type facilities are working at Research Center for Nuclear Physics in Osaka, and at RIKEN. Also a separator start its operation in medical facility in Chiba. In RIKEN, the construction of RI Beam Factory has been started. An ISOL-type facility is proposed in the Japan Hadron Facility in KEK. Table I summarize these facilities

Fusion plasma physics research on the H-1 national facility

International Nuclear Information System (INIS)

Harris, J.

1998-01-01

Full text: Australia has a highly leveraged fusion plasma research program centred on the H-1 National Facility device at the ANU. H-1 is a heliac, a novel helical axis stellarator that was experimentally pioneered in Australia, but has a close correlation with the worldwide research program on toroidal confinement of fusion grade plasma. Experiments are conducted on H-1 by university researchers from the Australian Fusion Research Group (comprising groups from the ANU, the Universities of Sydney, Western Sydney, Canberra, New England, and Central Queensland University) under the aegis of AINSE; the scientists also collaborate with fusion researchers from Japan and the US. Recent experiments on H-1 have focused on improved confinement modes that can be accessed at very low powers in H-1, but allow the study of fundamental physics effects seen on much larger machines at higher powers. H-1 is now being upgraded in magnetic field and heating power, and will be able to confine hotter plasmas beginning in 1999, offering greatly enhanced research opportunities for Australian plasma scientists and engineers, with substantial spillover of ideas from fusion research into other areas of applied physics and engineering

A small scale accelerator driven subcritical assembly development and demonstration experiment at LAMPF

International Nuclear Information System (INIS)

Wender, S.A.; Venneri, F.; Bowman, C.D.; Arthur, E.D.; Heighway, E.A.; Beard, C.A.; Bracht, R.R.; Buksa, J.J.; Chavez, W.; DeVolder, B.G.

1994-01-01

A small scale experiment is described that will demonstrate many of the aspects of accelerator-driven transmutation technology. This experiment uses the high-power proton beam from the Los Alamos Meson Physics Facility accelerator and will be located in the Area-A experimental hall. Beam currents of up to 1 mA will be used to produce neutrons with a molten lead target. The target is surrounded by a molten salt and graphite moderator blanket. Fissionable material can be added to the molten salt to demonstrate plutonium burning or transmutation of commercial spent fuel or energy production from thorium. The experiment will be operated at power levels up to 5 MW t

Planetary physics research programme at the Facility for Antiprotons and Ion Research at Darmstadt

International Nuclear Information System (INIS)

Tahir, N.A.; Neumayer, P.; Bagnoud, V.; Lomonosov, I.V.; Borm, B.; Piriz, A.R.; Piriz, S.A.; Shutov, A.

2017-01-01

Planetary physics research is an important part of the high energy density (HED) physics programme at the Facility for Antiprotons and Ion Research (FAIR) at Darmstadt. In this paper, we report numerical simulations of a proposed experiment named LAboratory PLAnetary Sciences (LAPLAS). These simulations show that in such experiments, an Fe sample can be imploded to extreme physical conditions that are expected to exist in the interior of the Earth and in the interior of more massive rocky planets named, super-Earths. The LAPLAS experiments will thus provide very valuable information on the equation-of-state (EOS) and transport properties of HED Fe, which will help the scientists to understand the structure and evolution of the planets in our solar system and of the extrasolar system planets. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Planetary physics research programme at the Facility for Antiprotons and Ion Research at Darmstadt

Energy Technology Data Exchange (ETDEWEB)

Tahir, N.A.; Neumayer, P.; Bagnoud, V. [Department of Plasma Physics, GSI Helmholtzzentrum fuer Schwerionenforschung, Darmstadt (Germany); Lomonosov, I.V. [Institute of Problems of Chemical Physics, Russian Academy of Sciences, Chernogolovka (Russian Federation); Tomsk University, Tomsk (Russian Federation); Lomonosov Moscow State University, Moscow (Russian Federation); Moscow Institute of Physics and Technology, Dolgoprudny (Russian Federation); Borm, B. [Department of Physics, Goethe-Universitaet Frankfurt, Frankfurt (Germany); Piriz, A.R.; Piriz, S.A. [E.T.S.I. Industrials, University of Castilla-La Mancha, Ciudad Real (Spain); Shutov, A. [Institute of Problems of Chemical Physics, Russian Academy of Sciences, Chernogolovka (Russian Federation)

2017-11-15

Planetary physics research is an important part of the high energy density (HED) physics programme at the Facility for Antiprotons and Ion Research (FAIR) at Darmstadt. In this paper, we report numerical simulations of a proposed experiment named LAboratory PLAnetary Sciences (LAPLAS). These simulations show that in such experiments, an Fe sample can be imploded to extreme physical conditions that are expected to exist in the interior of the Earth and in the interior of more massive rocky planets named, super-Earths. The LAPLAS experiments will thus provide very valuable information on the equation-of-state (EOS) and transport properties of HED Fe, which will help the scientists to understand the structure and evolution of the planets in our solar system and of the extrasolar system planets. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

The physics basis for ignition using indirect-drive targets on the National Ignition Facility

International Nuclear Information System (INIS)

Lindl, John D.; Amendt, Peter; Berger, Richard L.; Glendinning, S. Gail; Glenzer, Siegfried H.; Haan, Steven W.; Kauffman, Robert L.; Landen, Otto L.; Suter, Laurence J.

2004-01-01

The 1990 National Academy of Science final report of its review of the Inertial Confinement Fusion Program recommended completion of a series of target physics objectives on the 10-beam Nova laser at the Lawrence Livermore National Laboratory as the highest-priority prerequisite for proceeding with construction of an ignition-scale laser facility, now called the National Ignition Facility (NIF). These objectives were chosen to demonstrate that there was sufficient understanding of the physics of ignition targets that the laser requirements for laboratory ignition could be accurately specified. This research on Nova, as well as additional research on the Omega laser at the University of Rochester, is the subject of this review. The objectives of the U.S. indirect-drive target physics program have been to experimentally demonstrate and predictively model hohlraum characteristics, as well as capsule performance in targets that have been scaled in key physics variables from NIF targets. To address the hohlraum and hydrodynamic constraints on indirect-drive ignition, the target physics program was divided into the Hohlraum and Laser-Plasma Physics (HLP) program and the Hydrodynamically Equivalent Physics (HEP) program. The HLP program addresses laser-plasma coupling, x-ray generation and transport, and the development of energy-efficient hohlraums that provide the appropriate spectral, temporal, and spatial x-ray drive. The HEP experiments address the issues of hydrodynamic instability and mix, as well as the effects of flux asymmetry on capsules that are scaled as closely as possible to ignition capsules (hydrodynamic equivalence). The HEP program also addresses other capsule physics issues associated with ignition, such as energy gain and energy loss to the fuel during implosion in the absence of alpha-particle deposition. The results from the Nova and Omega experiments approach the NIF requirements for most of the important ignition capsule parameters, including

QAL: a language for nuclear physics data acquisition

International Nuclear Information System (INIS)

Perry, D.G.

1979-01-01

QAL is a data-acquisition language designed to facilitate the experimental interface to the LAMPF-designed Q data-acquisition system. The language constructs available are reviewed. The language is designed around the CAMAC standard and provides experimenters a language interface to the hardware which is easy to understand. Software written in the QAL language is modular and simple to modify

Educational intervention on physical restraint use in long-term care facilities – Systematic review and meta-analysis

Directory of Open Access Journals (Sweden)

Shao-Huan Lan

2017-08-01

Full Text Available “Physical restraint” formerly used as a measure of protection for psychiatric patients is now widely used. However, existing studies showed that physical restraint not only has inadequate effect of protection but also has negative effects on residents. To analyzes the impact of educational program on the physical restraint use in long-term care facilities. Design: A systematic review with meta-analysis and meta-regression. Eight databases, including Cochrane Library, ProQuest, PubMed, EMBASE, EBSCO, Web of Science, Ovid Medline and Physiotherapy Evidence Database (PEDro, were searched up to January 2017. Eligible studies were classified by intervention and accessed for quality using the Quality Assessment Tool for quantitative studies. Sixteen research articles were eligible in the final review; 10 randomize control trail studies were included in the analysis. The meta-analysis revealed that the use of physical restraint was significantly less often in the experimental (education group (OR = 0.55, 95% CI: 0.39 to 0.78, p < 0.001 compared to the control group. Meta-regression revealed the period of post education would have decreased the effect of the restraint educational program (β: 0.08, p = 0.002; instead, the longer education period and more times of education would have a stronger effect of reducing the use of physical restraint (β: −0.07, p < 0.001; β: −0.04, p = 0.056. The educational program had an effect on the reduced use of physical restraint. The results of meta-regression suggest that long-term care facilities should provide a continuous education program of physical restraint for caregivers.

Los Alamos Meson Physics Facility high-resolution-spectrometer dipole magnets: a summary report

International Nuclear Information System (INIS)

Kozlowski, T.; Madland, D.G.; Rolfe, R.; Smith, W.E.; Spencer, J.E.; Tanaka, N.; Thiessen, H.A.; Varghese, P.; Wilkerson, L.C.

1982-12-01

This report explains the design, fabrication, measurement, optimization, and installation of two 122 metric ton electromagnets for the High Resolution Proton Spectrometer at the Los Alamos Meson Physics Facility. These two magnets are the principal components of the proton spectrometer, which has an energy resolution of less than or equal to 10 - 4 FWHM. Many technical problems occurred during fabrication, measurement, and optimization, and the majority have been successfully solved. We hope that this report will help others planning similar projects

Physical Exposure to Seismic Hazards of Health Facilities in Mexico City, Mexico

Science.gov (United States)

Rodriguez, S. M.; Novelo Casanova, D.

2010-12-01

Although health facilities are essential infrastructure during disasters and emergencies, they are also usually highly vulnerable installations in the case of the occurrence of large and major earthquakes. Hospitals are one of the most complex critical facilities in modern cities and they are used as first response in emergency situations. The operability of a hospital must be maintained after the occurrence of a local strong earthquake in order to satisfy the need for medical care of the affected population. If a health facility is seriously damaged, it cannot fulfill its function when most is needed. In this case, hospitals become a casualty of the disaster. To identify the level of physical exposure of hospitals to seismic hazards in Mexico City, we analyzed their geographic location with respect to the seismic response of the different type of soils of the city from past earthquakes, mainly from the events that occurred on September 1985 (Ms= 8.0) and April 1989 (Ms= 6.9). Seismic wave amplification in this city is the result of the interaction of the incoming seismic waves with the soft and water saturated clay soils, on which a large part of Mexico City is built. The clay soils are remnants of the lake that existed in the Valley of Mexico and which has been drained gradually to accommodate the growing urban sprawl. Hospital facilities were converted from a simple database of names and locations into a map layer of resources. This resource layer was combined with other map layers showing areas of seismic microzonation in Mexico City. This overlay was then used to identify those hospitals that may be threatened by the occurrence of a large or major seismic event. We analyzed the public and private hospitals considered as main health facilities. Our results indicate that more than 50% of the hospitals are highly exposed to seismic hazards. Besides, in most of these health facilities we identified the lack of preventive measures and preparedness to reduce their

Cross-sectional relationship between physical fitness components and functional performance in older persons living in long-term care facilities

Directory of Open Access Journals (Sweden)

van Mechelen Willem

2006-02-01

Full Text Available Abstract Background The age-related deterioration of physiological capacities such as muscle strength and balance is associated with increased dependence. Understanding the contribution of physical fitness components to functional performance facilitates the development of adequate exercise interventions aiming at preservation of function and independence of older people. The aim of the study was to investigate the relationship between physical fitness components and functional performance in older people living in long-term care facilities. Methods Design cross-sectional study Subjects 226 persons living in long-term care facilities (mean age: 81.6 ± 5.6. Outcome measures Physical fitness and functional performance were measured by performance-based tests. Results Knee and elbow extension strength were significantly higher in men (difference = 44.5 and 50.0 N, respectively, whereas women were more flexible (difference sit & reach test = 7.2 cm. Functional performance was not significantly different between the genders. In men, motor coordination (eye-hand coordination and measures of strength were the main contributors to functional performance, whereas in women flexibility (sit and reach test and motor coordination (tandem stance and eye-hand coordination played a major role. Conclusion The results of this study show that besides muscle strength, fitness components such as coordination and flexibility are associated with functional performance of older people living in long-term care facilities. This suggests that men and women living in long-term care facilities, differ considerably concerning the fitness factors contributing to functional performance. Women and men may, therefore, need exercise programs emphasizing different fitness aspects in order to improve functional performance.

A distributed design for monitoring, logging, and replaying device readings at LAMPF

International Nuclear Information System (INIS)

Burns, M.

1991-01-01

As control of the Los Alamos Meson Physics linear accelerator and Proton Storage Ring moves to a more distributed system, it has been necessary to redesign the software which monitors, logs, and replays device readings throughout the facility. The new design allows devices to be monitored and their readings logged locally on a network of computers. Control of the monitoring and logging process is available throughout the network from user interfaces which communicate via remote procedure calls with server processes running on each node which monitors and records device readings. Similarly, the logged data can be replayed from anywhere on the network. Two major requirements influencing the final design were the need to reduce the load on the CPU of the control machines, and the need for much faster replay of the logged device readings. 1 ref., 2 figs

A distributed design for monitoring, logging, and replaying device readings at LAMPF

International Nuclear Information System (INIS)

Burns, M.

1992-01-01

As control of the Los Alamos Meson Physics linear accelerator and Proton Storage Ring moves to a more distributed system, it has been necessary to redesign the software which monitors, logs, and replays device readings throughout the facility. The new design allows devices to be monitored and their readings logged locally on a network of computers. Control of the monitoring and logging process is available throughout the network from user interfaces which communicate via remote procedure calls with server processes running on each node which monitors and records device readings. Similarly, the logged data can be replayed from anywhere on the network. Two major requirements influencing the final design were the need to reduce the load on the CPU of the control machines, and the need for much faster replay of the logged device readings. (author)

Facilities Programming.

Science.gov (United States)

Bullis, Robert V.

1992-01-01

A procedure for physical facilities management written 17 years ago is still worth following today. Each of the steps outlined for planning, organizing, directing, controlling, and evaluating must be accomplished if school facilities are to be properly planned and constructed. However, lessons have been learned about energy consumption and proper…

Physical activity opportunities in Canadian childcare facilities: a provincial/territorial review of legislation.

Science.gov (United States)

Vanderloo, Leigh M; Tucker, Patricia; Ismail, Ali; van Zandvroort, Melissa M

2012-05-01

Preschoolers spend a substantial portion of their day in childcare; therefore, these centers are an ideal venue to encourage healthy active behaviors. It is important that provinces'/territories' childcare legislation encourage physical activity (PA) opportunities. The purpose of this study was to review Canadian provincial/territorial childcare legislation regarding PA participation. Specifically, this review sought to 1) appraise each provincial/territorial childcare regulation for PA requirements, 2) compare such regulations with the NASPE PA guidelines, and 3) appraise these regulations regarding PA infrastructure. A review of all provincial/territorial childcare legislation was performed. Each document was reviewed separately by 2 researchers, and the PA regulations were coded and summarized. The specific provincial/territorial PA requirements (eg, type/frequency of activity) were compared with the NASPE guidelines. PA legislation for Canadian childcare facilities varies greatly. Eight of the thirteen provinces/territories provide PA recommendations; however, none provided specific time requirements for daily PA. All provinces/territories did require access to an outdoor play space. All Canadian provinces/territories lack specific PA guidelines for childcare facilities. The development, implementation, and enforcement of national PA legislation for childcare facilities may aid in tackling the childhood obesity epidemic and assist childcare staff in supporting and encouraging PA participation.

Systematic approach to the conceptual design of physical protection systems for nuclear facilities

International Nuclear Information System (INIS)

1978-05-01

A three-step approach is described which includes (1) facility characterization, (2) development and evaluation of hardware-based safeguards systems configurations, and (3) hardware and response force trade-off analysis. The purpose of the report is to establish a vehicle for initial examination and discussion by potential industry and government users of a formal sequence of activities for the conceptual design of physical protection systems and to identify currently available design tools, such as application reports, handbooks, and computer codes which might support these activities. 17 figs

High-energy pion beams: Problems and prospects

International Nuclear Information System (INIS)

Chrien, R.E.

1992-01-01

The investigation of relatively unexplored research areas with high energy pion beams requires new facilities. Presently existing meson factories such as LAMPF, TRIUMF and PSI provide insufficient pion fluxes above the 3,3 resonance region for access to topics such as strangeness production with the (π, K) reaction, baryon resonances, rare meson decays, and nuclear studies with penetrating pion beams. The problems and prospects of useful beams for these studies will be reviewed, both for existing facilities such as the AGS and KEK, and for possible future facilities like KAON and PILAC

Ice targets for use at NTOF

International Nuclear Information System (INIS)

Mercer, D.J.

1992-12-01

This report describes ice targets which were used during an experiment at the Neutron Time of Flight facility (NTOF) at LAMPF. Reasons for using the ice targets are given, and the construction, refrigeration system, and target preparation are detailed. Results of the research using these ice targets will be published at a later date

Additional measurements of the radiation environment at the Los Alamos Spallation Radiation Effects Facility at LAMPF

International Nuclear Information System (INIS)

Davidson, D.R.; Reedy, R.C.; Greenwood, L.R.; Sommer, W.F.; Wechsler, M.S.

1987-01-01

Foil activation dosimetry experiments were conducted in a ''rabbit'' system at the completed Los Alamos Spallation Effects Facility(LASREF). The ''rabbit'' system contains four test tubes spaced radially outward 0.12, 0.18, 0.27, and 0.38 m off beam centerline. Foils were irradiated for 3 to 62 h to measure the neutron flux and energy spectrum radially from beam centerline, along the beamline, and the effect of isotope production (IP) target loadings on the neutron flux in the neutron irradiation locations. Irradiations showed a decrease in the radial flux by a factor of 6 in 0.15 m of iron outside the IP targets. An enhancement was seen in the 24-keV energy region outside 0.15m. There was little difference in the shape of the spectra outside the IP targets and the beam stop with the exception of the high energy tail (energies above 20 MeV). The decrease in the high energy tail outside the beam stop is due to the degradation of the energy of the proton beam in the IP targets. Irradiations outside the beam stop with zero and eight IP targets gave the same spectral shape with the exception of the high energy tail. The magnitude of the integral flux decreased by a factor of two when eight IP targets were present. Irradiations with five ''rabbits'' stacked on top of each other showed no difference in the integral flux below, on and above beam centerline

Additional measurements of the radiation environment at the Los Alamos Spallation Radiation Effects Facility at LAMPF

International Nuclear Information System (INIS)

Davidson, D.R.; Reedy, R.C.; Greenwood, L.R.; Sommer, W.F.; Wechsler, M.S.

1986-01-01

Foil activation dosimetry experiments were conducted in a ''rabbit'' system at the completed Los Alamos Spallation Radiation Effects Facility (LASREF). The ''raffit'' system contains four tubes spaced radially outward 0.12, 0.18, 0.27, and 0.38 meters off beam centerline. Foils were irradiated for 3 to 62 hours to measure the neutron flux and energy spectrum radially from beam centerline, along the beamline, and the effect of the Isotope Production (IP) target loadings on the neutron flux in the neutron irradiation locations. Irradiations showed a decrease in the radial flux by a factor of 6 in 0.15 meters of iron outside the IP targets. An enchancement was seen in the 24-keV energy region outside 0.15 meters. There was little difference in the shape of the spectra outside the IP targets and the beam stop with the exception of the high energy tail (energies above 20 MeV). The decrease in the high energy tail outside the beam stop is due to the degradation of the energy of the proton beam in the IP targets. Irradiations outside the beam stop with zero and eight IP targets gave the same spectral shape with the exception of the high energy tail. The magnitude of the integral flux decreased by a factor of 2 when eight IP targets were present. Irradiations with five ''rabbits'' stacked on top of each other showed no difference in the integral flux below, on and above beam centerline

Physics at the proposed National Underground Science Facility

International Nuclear Information System (INIS)

Nieto, M.M.

1983-01-01

The scientific, technical, and financial reasons for building a National Underground Science Facility are discussed. After reviewing examples of other underground facilities, we focus on the Los Alamos proposal and the national for its choice of site

Spatial accessibility to physical activity facilities and to food outlets and overweight in French youth.

Science.gov (United States)

Casey, R; Chaix, B; Weber, C; Schweitzer, B; Charreire, H; Salze, P; Badariotti, D; Banos, A; Oppert, J-M; Simon, C

2012-07-01

Some characteristics of the built environment have been associated with obesity in youth. Our aim was to determine whether individual and environmental socio-economic characteristics modulate the relation between youth overweight and spatial accessibility to physical activity (PA) facilities and to food outlets. Cross-sectional study. 3293 students, aged 12 ± 0.6 years, randomly selected from eastern France middle schools. Using geographical information systems (GIS), spatial accessibility to PA facilities (urban and nature) was assessed using the distance to PA facilities at the municipality level; spatial accessibility to food outlets (general food outlets, bakeries and fast-food outlets) was calculated at individual level using the student home address and the food outlets addresses. Relations of weight status with spatial accessibility to PA facilities and to food outlets were analysed using mixed logistic models, testing potential direct and interaction effects of individual and environmental socio-economic characteristics. Individual socio-economic status modulated the relation between spatial accessibility to PA facilities and to general food outlets and overweight. The likelihood of being overweight was higher when spatial accessibility to urban PA facilities and to general food outlets was low, but in children of blue-collar-workers only. The odds ratio (OR) (95% confidence interval) for being overweight of blue-collar-workers children compared with non-blue-collar-workers children was 1.76 (1.25-2.49) when spatial accessibility to urban PA facilities was low. This OR was 1.86 (1.20-2.86) when spatial accessibility to general food outlets was low. There was no significant relationship of overweight with either nature PA facilities or other food outlets (bakeries and fast-food outlets). These results indicate that disparities in spatial accessibility to PA facilities and to general food outlets may amplify the risk of overweight in socio

Publications of LASL research

International Nuclear Information System (INIS)

1977-01-01

LASL now devotes about one-half of its total effort to unclassified research exploring several peaceful applications of nuclear and other forms of energy. LASL research covers a broad spectrum, ranging from medium-energy, low-energy, and high-energy nuclear physics research to programs involving medical and biological effects of radiation and basic work in molecular and cellular biology. Major nonweapons research activities at Los Alamos involve energy research in fields such as superconducting electrical energy transmission and storage, solar and geothermal energy development, laser fusion research and laser isotope separation, and controlled thermonuclear research using magnetic confinement. Facilities used in such research at the Laboratory include specialized laboratories, a nuclear reactor designed for a variety of experiments, particle accelerators such as the 24-MeV Van de Graaff and LAMPF, Scyllac, and a central computing facility. LASL, as of 1977, employed about 6,000 persons, about one-third of whom are scientists and engineers. The total operating costs are about $250 million per year

Publications of LASL research

Energy Technology Data Exchange (ETDEWEB)

1977-01-01

LASL now devotes about one-half of its total effort to unclassified research exploring several peaceful applications of nuclear and other forms of energy. LASL research covers a broad spectrum, ranging from medium-energy, low-energy, and high-energy nuclear physics research to programs involving medical and biological effects of radiation and basic work in molecular and cellular biology. Major nonweapons research activities at Los Alamos involve energy research in fields such as superconducting electrical energy transmission and storage, solar and geothermal energy development, laser fusion research and laser isotope separation, and controlled thermonuclear research using magnetic confinement. Facilities used in such research at the Laboratory include specialized laboratories, a nuclear reactor designed for a variety of experiments, particle accelerators such as the 24-MeV Van de Graaff and LAMPF, Scyllac, and a central computing facility. LASL, as of 1977, employed about 6,000 persons, about one-third of whom are scientists and engineers. The total operating costs are about $250 million per year. (RWR)

Active use of urban park facilities

DEFF Research Database (Denmark)

Lindberg, Michael; Schipperijn, Jasper

2015-01-01

groups of the facilities. Facilities that provide the opportunity for games and playing activities are more used for PA than facilities directed at individual training of strength and fitness. The opportunity for socializing and playing while being physically active seems important for many users...... was mentioned as a key factor when designing facilities. Our results provide important knowledge to architects, planners and policy makers when aiming at designing activity-promoting facilities in UGS. Future studies need to further investigate the use of facilities among specific target groups, particularly......Abstract Urban green spaces (UGS), and more specific a higher number of facilities in UGS, have been positively associated with physical activity (PA). However, more detailed studies of which facilities generate high levels of PA, for which type of users, are relevant as existing knowledge...

Modern computer hardware and the role of central computing facilities in particle physics

International Nuclear Information System (INIS)

Zacharov, V.

1981-01-01

Important recent changes in the hardware technology of computer system components are reviewed, and the impact of these changes assessed on the present and future pattern of computing in particle physics. The place of central computing facilities is particularly examined, to answer the important question as to what, if anything, should be their future role. Parallelism in computing system components is considered to be an important property that can be exploited with advantage. The paper includes a short discussion of the position of communications and network technology in modern computer systems. (orig.)

Sport facility proximity and physical activity: Results from the Study of Community Sports in China.

Science.gov (United States)

Guo, Xiujin; Dai, Jian; Xun, Pengcheng; Jamieson, Lynn M; He, Ka

2015-01-01

Increased sport facility proximity is associated with higher likelihood of meeting physical activity (PA) recommendations in western studies, but it is uncertain whether the findings can be generalized to the Chinese population. From September 2012 to December 2012, 3926 participants drawn from China using a multi-stage sampling strategy were invited to participate in the Study of Community Sports in China. Participants' demographics, commuting time to the nearest sport facility and PA levels were assessed. Among 3926 participants included (51.2% female) in the final analysis, 878 (22.4%) of them met the PA recommendation. Participants who spent ≥30 minutes in commuting time had 80% odds [odds ratio (OR): 0.80 (95% CI: 0.65-0.98)] of meeting the PA recommendation compared to those who spent less than 10 minutes. For every 10-minute increment in commuting time, the odds reduced by 6% [OR = 0.94 (0.88-0.99)]. The observed associations were not appreciably modified by age, gender or education level. In this cross-sectional community-based study, we found that residents in China were less likely to meet the PA recommendation if they needed more commuting time to the nearest sport facility. Increasing sport facility proximity may be effective in improving the PA levels in the Chinese population.

Experimental studies of pion-nucleus interactions at intermediate energies

International Nuclear Information System (INIS)

1991-01-01

This report summarizes the work on experimental research in intermediate energy nuclear physics carried out at New Mexico State University in 1991 under a great from the US Department of Energy. Most of these studies have involved investigations of various pion-nucleus interactions. The work has been carried out both with the LAMPF accelerator at the Los Alamos National Laboratory and with the cyclotron at the Paul Scherrer Institute (PSI) near Zurich, Switzerland. Part of the experimental work involves measurements of new data on double-charge-exchange scattering, using facilities at LAMPF which we helped modify, and on pion absorption, using a new detector system at PSI that covers nearly the full solid-angle region which we helped construct. Other work involved preparation for future experiments using polarized nuclear targets and a new high-resolution spectrometer system for detecting π 0 mesons. We also presented several proposals for works to be done in future years, involving studies related to pi-mesonic atoms, fundamental pion-nucleon interactions, studies of the difference between charged and neutral pion interactions with the nucleon, studies of the isospin structure of pion-nucleus interactions, and pion scattering from polarized 3 He targets. This work is aimed at improving our understanding of the pion-nucleon interaction, of the pion-nucleus interaction mechanism, and of nuclear structure

The future IKO-PION-MUON-facility

International Nuclear Information System (INIS)

Goudsmit, P.F.A.; Arnold, H.; Dantzig, R. van; Konijn, J.

1975-09-01

Information is given on the pion and muon physics facility planned at the Institute for Nuclear Physics Research (IKO) with special notice of the fluxes of pions and muons expected at this facility, as well as on the structure of these secondary beams

Investigating walking environments in and around assisted living facilities: a facility visit study.

Science.gov (United States)

Lu, Zhipeng

2010-01-01

This study explores assisted living residents' walking behaviors, locations where residents prefer to walk, and walking environments in and around assisted living facilities. Regular walking is beneficial to older adults' physical and psychological health. Yet frail older residents in assisted living are usually too sedentary to achieve these benefits. The physical environment plays an important role in promoting physical activity. However, there is little research exploring this relationship in assisted living settings. The researcher visited 34 assisted living facilities in a major Texas city. Methods included walk-through observation with the Assisted Living Facility Walking Environment Checklist, and interviews with administrators by open- and close-ended questions. The data from 26 facilities were analyzed using descriptive statistics (for quantitative data) and content analysis (for qualitative data). The results indicate that (a) residents were walking both indoors and outdoors for exercise or other purposes (e.g., going to destinations); (b) assisted living facility planning and design details-such as neighborhood sidewalk conditions, facility site selection, availability of seating, walking path configuration (e.g., looped/nonlooped path), amount of shading along the path, presence of handrails, existence of signage, etc.-may influence residents' walking behaviors; and (c) current assisted living facilities need improvement in all aspects to make their environments more walkable for residents. Findings of the study provide recommendations for assisted living facilities to improve the walkability of environments and to create environmental interventions to promote regular walking among their residents. This study also implies several directions for future research.

National Ignition Facility system design requirements conventional facilities SDR001

International Nuclear Information System (INIS)

Hands, J.