Measuring the performance of vaccination programs using cross-sectional surveys: a likelihood framework and retrospective analysis.

Directory of Open Access Journals (Sweden)

Justin Lessler

2011-10-01

Full Text Available The performance of routine and supplemental immunization activities is usually measured by the administrative method: dividing the number of doses distributed by the size of the target population. This method leads to coverage estimates that are sometimes impossible (e.g., vaccination of 102% of the target population, and are generally inconsistent with the proportion found to be vaccinated in Demographic and Health Surveys (DHS. We describe a method that estimates the fraction of the population accessible to vaccination activities, as well as within-campaign inefficiencies, thus providing a consistent estimate of vaccination coverage.We developed a likelihood framework for estimating the effective coverage of vaccination programs using cross-sectional surveys of vaccine coverage combined with administrative data. We applied our method to measles vaccination in three African countries: Ghana, Madagascar, and Sierra Leone, using data from each country's most recent DHS survey and administrative coverage data reported to the World Health Organization. We estimate that 93% (95% CI: 91, 94 of the population in Ghana was ever covered by any measles vaccination activity, 77% (95% CI: 78, 81 in Madagascar, and 69% (95% CI: 67, 70 in Sierra Leone. "Within-activity" inefficiencies were estimated to be low in Ghana, and higher in Sierra Leone and Madagascar. Our model successfully fits age-specific vaccination coverage levels seen in DHS data, which differ markedly from those predicted by naïve extrapolation from country-reported and World Health Organization-adjusted vaccination coverage.Combining administrative data with survey data substantially improves estimates of vaccination coverage. Estimates of the inefficiency of past vaccination activities and the proportion not covered by any activity allow us to more accurately predict the results of future activities and provide insight into the ways in which vaccination programs are failing to meet their

Mentoring perception and academic performance: an Academic Health Science Centre survey.

Science.gov (United States)

Athanasiou, Thanos; Patel, Vanash; Garas, George; Ashrafian, Hutan; Shetty, Kunal; Sevdalis, Nick; Panzarasa, Pietro; Darzi, Ara; Paroutis, Sotirios

2016-10-01

To determine the association between professors' self-perception of mentoring skills and their academic performance. Two hundred and fifteen professors from Imperial College London, the first Academic Health Science Centre (AHSC) in the UK, were surveyed. The instrument adopted was the Mentorship Skills Self-Assessment Survey. Statement scores were aggregated to provide a score for each shared core, mentor-specific and mentee-specific skill. Univariate and multivariate regression analyses were used to evaluate their relationship with quantitative measures of academic performance (publications, citations and h-index). There were 104 professors that responded (response rate 48%). There were no statistically significant negative correlations between any mentoring statement and any performance measure. In contrast, several mentoring survey items were positively correlated with academic performance. The total survey score for frequency of application of mentoring skills had a statistically significant positive association with number of publications (B=0.012, SE=0.004, p=0.006), as did the frequency of acquiring mentors with number of citations (B=1.572, SE=0.702, p=0.030). Building trust and managing risks had a statistically significant positive association with h-index (B=0.941, SE=0.460, p=0.047 and B=0.613, SE=0.287, p=0.038, respectively). This study supports the view that mentoring is associated with high academic performance. Importantly, it suggests that frequent use of mentoring skills and quality of mentoring have positive effects on academic performance. Formal mentoring programmes should be considered a fundamental part of all AHSCs' configuration. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

A performance measurement using balanced scorecard and structural equation modeling

Directory of Open Access Journals (Sweden)

Rosha Makvandi

2014-02-01

Full Text Available During the past few years, balanced scorecard (BSC has been widely used as a promising method for performance measurement. BSC studies organizations in terms of four perspectives including customer, internal processes, learning and growth and financial figures. This paper presents a hybrid of BSC and structural equation modeling (SEM to measure the performance of an Iranian university in province of Alborz, Iran. The proposed study of this paper uses this conceptual method, designs a questionnaire and distributes it among some university students and professors. Using SEM technique, the survey analyzes the data and the results indicate that the university did poorly in terms of all four perspectives. The survey extracts necessary target improvement by presenting necessary attributes for performance improvement.

A key performance measures for evaluating cold supply chain performance in farm industry

Directory of Open Access Journals (Sweden)

Shashi Shashi

2015-08-01

Full Text Available The main objective of this study was to develop a set of measures, evaluate their importance and effect in cold supply chain performance. This investigation reviewed previous research works on all the stages of the farm product supply chain. Based on farm product supply chain, 4 measures with 31 metrics were identified and developed to measure the cold supply chain performance. A survey was organized to establish the importance and the effect of identified measures. The 5 point Likert scale questionnaire was distributed among SC academics and practitioners. The observed finding infers that the measurement instrument was substantiating for evaluating cold supply chain performance in farm industry. The new developed metrics will help firms improve the visibility of supply among partners and in better decision making. The investigation was enfolded up through the plan of direction intended for future study.

How to Use the School Survey of Practices Associated with High Performance. REL 2016-162

Science.gov (United States)

Weinstock, Phyllis; Yumoto, Futoshi; Abe, Yasuyo; Meyers, Coby; Wan, Yinmei

2016-01-01

This report describes and explains how to use the School Survey of Practices Associated with High Performance, which measures the degree to which schools are engaging in practices associated with high performance. State education departments and school districts can use the survey results to identify and describe school practices associated with…

Performance measurement of administration services using balance scorecard and Kano model

Directory of Open Access Journals (Sweden)

Abolfazl Danaei

2014-04-01

Full Text Available This paper performs a survey to measure the performance of an administration unit in Iran based on a popular technique of balance scorecard. The study also uses Kano model to prioritize various factors and to provide necessary recommendation to improve the performance of different units. The survey has indicated that while these offices do well in terms of financial figures as well as customer perspective, they perform poorly in terms of learning and growth. According to our survey, it is essential to use information technology in general service offices, properly. In addition, these administrative agencies need to use hardware and software packages, more efficiently and these two basic items have received much attraction.

Strategy Archetypes Adopted by Icelandic Companies, Their Fit with Performance Measures and Effects on Financial Performance

DEFF Research Database (Denmark)

Rikhardsson, Pall; Sigurjonsson, Olaf; Arnardottir, Audur Arna

Past research seems to suggest that companies adopting certain strategies favor certain sets of performance measures. That is to say companies using entrepreneurial focused strategies favor non-financial measures or a balanced mix of financial and non-financial measures. Companies adopting reactive...... or operational strategies seem to favor financial measures and are less likely to use non-financial measures. We take this research further by focusing not only on the link between strategy types and performance measures but also on what specific performance measures are used in connection to which strategies....... Furthermore, we examine the link between the strategies adopted, the performance measures favored and the financial performance of the companies. The empirical data collection was carried out in winter 2013 with a population of the 300 largest companies in Iceland. The survey was sent to the CFO...

Measurement of smoking: surveys and some recommendations.

Science.gov (United States)

Shipley, R H; Rosen, T J; Williams, C

1982-01-01

A survey of smoking cessation researchers found considerable disagreement in the measurement procedures used to determine treatment outcome. The survey investigated (1) the duration of the measurement interval used to determine abstinence and smoking rate; (2) procedures for classifying people who smoke after treatment but are abstinent at follow-up; and (3) procedures for classifying people who use marijuana or tobacco products other than cigarettes. The marked disagreement among researchers' survey responses was compounded by the failure of their published articles to explain how smoking had been measured and scored. The Discussion identifies long-term abstinence as the most critical problem; its measurement was least consistent procedurally across studies yet most important for comparing them. Recommendations are made for establishing measurement and reporting conventions.

Human performance in radiological survey scanning

International Nuclear Information System (INIS)

Brown, W.S.; Abelquist, E.W.

1998-03-01

The probability of detecting residual contamination in the field using portable radiological survey instruments depends not only on the sensitivity of the instrumentation used in scanning, but also on the surveyor's performance. This report provides a basis for taking human performance into account in determining the minimum level of activity detectable by scanning. A theoretical framework was developed (based on signal detection theory) which allows influences on surveyors to be anticipated and understood, and supports a quantitative assessment of performance. The performance of surveyors under controlled yet realistic field conditions was examined to gain insight into the task and to develop means of quantifying performance. Then, their performance was assessed under laboratory conditions to quantify more precisely their ability to make the required discriminations. The information was used to characterize surveyors' performance in the scanning task and to provide a basis for predicting levels of radioactivity that are likely to be detectable under various conditions by surveyors using portable survey instruments

Human performance in radiological survey scanning

Energy Technology Data Exchange (ETDEWEB)

Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Abelquist, E.W. [Oak Ridge Inst. for Science and Education, TN (United States)

1998-03-01

The probability of detecting residual contamination in the field using portable radiological survey instruments depends not only on the sensitivity of the instrumentation used in scanning, but also on the surveyor`s performance. This report provides a basis for taking human performance into account in determining the minimum level of activity detectable by scanning. A theoretical framework was developed (based on signal detection theory) which allows influences on surveyors to be anticipated and understood, and supports a quantitative assessment of performance. The performance of surveyors under controlled yet realistic field conditions was examined to gain insight into the task and to develop means of quantifying performance. Then, their performance was assessed under laboratory conditions to quantify more precisely their ability to make the required discriminations. The information was used to characterize surveyors` performance in the scanning task and to provide a basis for predicting levels of radioactivity that are likely to be detectable under various conditions by surveyors using portable survey instruments.

Follow-up skeletal surveys for nonaccidental trauma: can a more limited survey be performed?

Energy Technology Data Exchange (ETDEWEB)

Harlan, Susan R. [University of Utah School of Medicine, Department of Radiology, Salt Lake City, UT (United States); Nixon, G.W.; Prince, Jeffrey S. [Primary Children' s Medical Center, Department of Medical Imaging, Salt Lake City, UT (United States); Campbell, Kristine A.; Hansen, Karen [University of Utah School of Medicine, Department of Pediatrics, Salt Lake City, UT (United States)

2009-09-15

Studies have demonstrated the value of the follow-up skeletal survey in identifying additional fractures, clarifying indeterminate findings, and improving dating of skeletal injuries in victims of physical abuse. To determine whether a more limited follow-up survey could yield the same radiologic data as a full follow-up survey. The study cohort comprised 101 children who had follow-up surveys that met our inclusion criteria. Consensus readings of both original and follow-up surveys were performed by two pediatric radiologists. These results were compared to determine additional findings from the follow-up surveys. Limited skeletal survey protocols were evaluated to determine whether they would detect the same fractures seen with a complete osseous survey. In the 101 children 244 fractures were identified on the initial osseous survey. Follow-up surveys demonstrated new information in 38 children (37.6%). A 15-view limited follow-up survey identified all additional information seen on the complete follow-up survey. Our data demonstrate that a 15-view limited follow-up skeletal survey could be performed without missing clinically significant new fractures and still allow proper identification of confirmed fractures or normal findings. A limited survey would decrease radiation dose in children. (orig.)

Follow-up skeletal surveys for nonaccidental trauma: can a more limited survey be performed?

International Nuclear Information System (INIS)

Harlan, Susan R.; Nixon, G.W.; Prince, Jeffrey S.; Campbell, Kristine A.; Hansen, Karen

2009-01-01

Studies have demonstrated the value of the follow-up skeletal survey in identifying additional fractures, clarifying indeterminate findings, and improving dating of skeletal injuries in victims of physical abuse. To determine whether a more limited follow-up survey could yield the same radiologic data as a full follow-up survey. The study cohort comprised 101 children who had follow-up surveys that met our inclusion criteria. Consensus readings of both original and follow-up surveys were performed by two pediatric radiologists. These results were compared to determine additional findings from the follow-up surveys. Limited skeletal survey protocols were evaluated to determine whether they would detect the same fractures seen with a complete osseous survey. In the 101 children 244 fractures were identified on the initial osseous survey. Follow-up surveys demonstrated new information in 38 children (37.6%). A 15-view limited follow-up survey identified all additional information seen on the complete follow-up survey. Our data demonstrate that a 15-view limited follow-up skeletal survey could be performed without missing clinically significant new fractures and still allow proper identification of confirmed fractures or normal findings. A limited survey would decrease radiation dose in children. (orig.)

Analyzing Repeated Measures Marginal Models on Sample Surveys with Resampling Methods

Directory of Open Access Journals (Sweden)

James D. Knoke

2005-12-01

Full Text Available Packaged statistical software for analyzing categorical, repeated measures marginal models on sample survey data with binary covariates does not appear to be available. Consequently, this report describes a customized SAS program which accomplishes such an analysis on survey data with jackknifed replicate weights for which the primary sampling unit information has been suppressed for respondent confidentiality. First, the program employs the Macro Language and the Output Delivery System (ODS to estimate the means and covariances of indicator variables for the response variables, taking the design into account. Then, it uses PROC CATMOD and ODS, ignoring the survey design, to obtain the design matrix and hypothesis test specifications. Finally, it enters these results into another run of CATMOD, which performs automated direct input of the survey design specifications and accomplishes the appropriate analysis. This customized SAS program can be employed, with minor editing, to analyze general categorical, repeated measures marginal models on sample surveys with replicate weights. Finally, the results of our analysis accounting for the survey design are compared to the results of two alternate analyses of the same data. This comparison confirms that such alternate analyses, which do not properly account for the design, do not produce useful results.

Two survey meters for measuring low γ-ray dose rates

International Nuclear Information System (INIS)

Jones, A.R.

1979-01-01

Two low-level survey meters have been developed which have numerical displays. The first is of the light-emitting diode (LED) type. The second is a liquid crystal display (LCD). The design of both instruments is described and results of measurements of performance are presented. They measure γ dose rates from background up to 2 mrad/h (20 μGy/h) for γ-rays in the energy range 0.05-1.25 MeV. They can be used at temperatures between -20 deg C and +50 deg C. Statistical accuracy and battery life both depend upon a number of factors and this dependence is shown. A later section describes the intended application of the survey meters. An appendix describes the circuit adjustments which are necessary and when they must be made. (author)

A survey of temperature measurement

International Nuclear Information System (INIS)

Saltvold, J.R.

1976-03-01

Many different techniques for measuring temperature have been surveyed and are discussed. The concept of temperature and the physical phenomena used in temperature measurement are also discussed. Extensive tables are presented in which the range and accuracy of the various techniques and other related data are included. (author)

The Effects of Performance Measurement and Compensation on Motivation

OpenAIRE

Marco van Herpen; C. Mirjam van Praag; Kees Cools

2003-01-01

This paper analyzes empirically the relationship between pay and performance. Economic and psychological theories predict that the design and implementation of a performance measurement and compensation system affect the motivation of employees. Our survey results demonstrate a positive relationship between the perceived characteristics of the complete compensation system and extrinsic motivation. Intrinsic motivation is not affected by the design of monetary compensation, but by promotion op...

Methodology for performing measurements to release material from radiological control

International Nuclear Information System (INIS)

Durham, J.S.; Gardner, D.L.

1993-09-01

This report describes the existing and proposed methodologies for performing measurements of contamination prior to releasing material for uncontrolled use at the Hanford Site. The technical basis for the proposed methodology, a modification to the existing contamination survey protocol, is also described. The modified methodology, which includes a large-area swipe followed by a statistical survey, can be used to survey material that is unlikely to be contaminated for release to controlled and uncontrolled areas. The material evaluation procedure that is used to determine the likelihood of contamination is also described

Measuring and exposures from National Media Surveys

DEFF Research Database (Denmark)

Mortensen, Peter Stendahl

2000-01-01

Natinal media surveys inform about the number and kind of people being exposed to the media in question. This paper discusses to what extent these numbers may be used as measures for the exposure to ads in the media in question. In this context attention is also focussed on elements in the media ...... surveys themselves that might invalidate or give unreliable measures, both when measuring a single exposure and accumulated exposures. Four media types will be discussed: TV, radio, print and the internet.......Natinal media surveys inform about the number and kind of people being exposed to the media in question. This paper discusses to what extent these numbers may be used as measures for the exposure to ads in the media in question. In this context attention is also focussed on elements in the media...

The effects of performance measurement and compensation on motivation : an empirical study

NARCIS (Netherlands)

van Herpen, M.; van Praag, M.; Cools, K.

2005-01-01

This paper analyzes empirically the relationship between pay and performance. Economic and psychological theories predict that the design and implementation of a performance measurement and compensation system affect the motivation of employees. Our survey results demonstrate a positive relationship

The effects of performance measurement and compensation on motivation : An empirical study

NARCIS (Netherlands)

Van Herpen, M; Van Praag, M; Cools, K

This paper analyzes empirically the relationship between pay and performance. Economic and psychological theories predict that the design and implementation of a performance measurement and compensation system affect the motivation of employees. Our survey results demonstrate a positive relationship

Car-borne survey measurements with a 3x3` NaI detector

Energy Technology Data Exchange (ETDEWEB)

Larsen, E.; Ugletveit, F.; Floe, L.; Mikkelborg, O. [Norwegian Radiation Protection Authority, Oesteraas (Norway)

1997-12-31

The Norwegian Radiation Protection Authority (NRPA) took part in the international survey measurement exercise RESUME95 that was arranged in Finland in August 1995. NRPA performed measurements with a simple car-borne measuring system based on standard equipment, a 3x3` NaI detector, an MCA and a GPS connected to a portable PC. The results show substantial variations in dose rate inside areas of a few square kilometres. Spectrum analysis shows that a major part of these differences are caused by variations in deposition of {sup 137}Cs. Our results show that even standard 3x3` NaI detectors can be used for car based survey measurements in fall out situations and search for sources. The detection limits are higher than for larger detectors, but the main limiting factor seem to be the timing capabilities of the acquisition system. (au).

Car-borne survey measurements with a 3x3' NaI detector

International Nuclear Information System (INIS)

Larsen, E.; Ugletveit, F.; Floe, L.; Mikkelborg, O.

1997-01-01

The Norwegian Radiation Protection Authority (NRPA) took part in the international survey measurement exercise RESUME95 that was arranged in Finland in August 1995. NRPA performed measurements with a simple car-borne measuring system based on standard equipment, a 3x3' NaI detector, an MCA and a GPS connected to a portable PC. The results show substantial variations in dose rate inside areas of a few square kilometres. Spectrum analysis shows that a major part of these differences are caused by variations in deposition of 137 Cs. Our results show that even standard 3x3' NaI detectors can be used for car based survey measurements in fall out situations and search for sources. The detection limits are higher than for larger detectors, but the main limiting factor seem to be the timing capabilities of the acquisition system. (au)

Car-borne survey measurements with a 3x3` NaI detector

Energy Technology Data Exchange (ETDEWEB)

Larsen, E; Ugletveit, F; Floe, L; Mikkelborg, O [Norwegian Radiation Protection Authority, Oesteraas (Norway)

1998-12-31

The Norwegian Radiation Protection Authority (NRPA) took part in the international survey measurement exercise RESUME95 that was arranged in Finland in August 1995. NRPA performed measurements with a simple car-borne measuring system based on standard equipment, a 3x3` NaI detector, an MCA and a GPS connected to a portable PC. The results show substantial variations in dose rate inside areas of a few square kilometres. Spectrum analysis shows that a major part of these differences are caused by variations in deposition of {sup 137}Cs. Our results show that even standard 3x3` NaI detectors can be used for car based survey measurements in fall out situations and search for sources. The detection limits are higher than for larger detectors, but the main limiting factor seem to be the timing capabilities of the acquisition system. (au).

Market survey of level measurement equipment

International Nuclear Information System (INIS)

Anon.

1993-01-01

In a market survey of level measurement equipment from 42 manufacturers, which is based on different principles of measurement and which is used for different applications, the data of the various manufacturers is compiled. (orig./HP) [de

The Effects Of Leadership Styles On Goal Clarity And Fairness Mediated Used Performance Measure

OpenAIRE

Amris Rusli Tanjung; Yesi Mutia Basri

2017-01-01

This paper investigate the effects of superiors performance evaluation behaviors on subordinates work-related attitudes mediated used performance measure. We used leadership style initiating structure and consideration and performance measure use objective and subjective measures on managerial work related attitudes goal clarity and evaluation fairness. We test our hypotheses using survey data from 56 middle-level managers in 4 services organizations. The results from Structural Equation Mode...

An exploratory survey of methods used to develop measures of performance

Science.gov (United States)

Hamner, Kenneth L.; Lafleur, Charles A.

1993-09-01

Nonmanufacturing organizations are being challenged to provide high-quality products and services to their customers, with an emphasis on continuous process improvement. Measures of performance, referred to as metrics, can be used to foster process improvement. The application of performance measurement to nonmanufacturing processes can be very difficult. This research explored methods used to develop metrics in nonmanufacturing organizations. Several methods were formally defined in the literature, and the researchers used a two-step screening process to determine the OMB Generic Method was most likely to produce high-quality metrics. The OMB Generic Method was then used to develop metrics. A few other metric development methods were found in use at nonmanufacturing organizations. The researchers interviewed participants in metric development efforts to determine their satisfaction and to have them identify the strengths and weaknesses of, and recommended improvements to, the metric development methods used. Analysis of participants' responses allowed the researchers to identify the key components of a sound metrics development method. Those components were incorporated into a proposed metric development method that was based on the OMB Generic Method, and should be more likely to produce high-quality metrics that will result in continuous process improvement.

Visible School Security Measures and Student Academic Performance, Attendance, and Postsecondary Aspirations.

Science.gov (United States)

Tanner-Smith, Emily E; Fisher, Benjamin W

2016-01-01

Many U.S. schools use visible security measures (security cameras, metal detectors, security personnel) in an effort to keep schools safe and promote adolescents' academic success. This study examined how different patterns of visible security utilization were associated with U.S. middle and high school students' academic performance, attendance, and postsecondary educational aspirations. The data for this study came from two large national surveys--the School Crime Supplement to the National Crime Victimization Survey (N = 38,707 students; 51% male, 77% White, MAge = 14.72) and the School Survey on Crime and Safety (N = 10,340 schools; average student composition of 50% male, 57% White). The results provided no evidence that visible security measures had consistent beneficial effects on adolescents' academic outcomes; some security utilization patterns had modest detrimental effects on adolescents' academic outcomes, particularly the heavy surveillance patterns observed in a small subset of high schools serving predominantly low socioeconomic students. The findings of this study provide no evidence that visible security measures have any sizeable effects on academic performance, attendance, or postsecondary aspirations among U.S. middle and high school students.

BUSINESS SURVEY LIQUIDITY MEASURE AS A LEADING INDICATOR OF CROATIAN INDUSTRIAL PRODUCTION

Directory of Open Access Journals (Sweden)

Mirjana Čižmešija

2012-12-01

Full Text Available Business survey liquidity measure is one of the modifications of the uniform EU business survey methodology applied in Croatia. Consequent liquidity problem have been, since socialist times, one of the major problem for Croatia's business. The problem rapidly increased between 1995 and 2000 and now it again represents the main difficulty for the Croatian economy. In order to improve the forecasting properties of business survey liquidity measure, some econometric models ware applied. Based on the regression analysis we concluded that the changes in the liquidity variable can predict the direction of changes in industrial production with one quarter lead. The results also show that liquidity can be a proxy of the Industrial Confidence Indicator in the observed period. The empirical analysis was performed using quarterly data covering the period from the first quarter 2005 to the fourth quarter 2011. The data sources were Privredni vjesnik (a business magazine in Croatia and the Croatian Bureau of Statistics.

Using DEMATEL approach to develop relationships of performance indicators on sustainable service only supply chain performance measurement

Science.gov (United States)

Leksono, EB; Suparno; Vanany, I.

2018-04-01

Service only supply chain (SOSC) concept is service supply chain (SSC) implementation on pure services. The globalization and stakeholder pressure makes operation of SSC should give the attention to the environment effect, community, economic and intangibility assets. SOSC performance measurement (SOSCPM) may be developed for measuring of performance for sustainability aspects and intangibility assets to meet customer satisfaction. This article discusses sustainable SOSCPM based on balanced scorecard (BSC), include sustainability aspects, intangibility and relations between perspectives and indicators. From literature review, it is found 34 performance indicators that must be confirm to expert and SC actors by survey. From survey validation using weighted average and level of consensus, it is found 29 valid indicators for processed by DEMATEL. From DEMATEL, it is found 26 indicators can be used on sustainable SOSCPM. Furthermore, innovation and growth perspective most influence to other, and customer perspective most important. Intangibility indicators incorporated on innovation and growth perspective very related with human resources. Finally, relations between perspectives and indicator used to design of BSC strategy maps.

AngularJS Performance: A Survey Study

OpenAIRE

Ramos, Miguel; Valente, Marco Tulio; Terra, Ricardo

2017-01-01

AngularJS is a popular JavaScript MVC-based framework to construct single-page web applications. In this paper, we report the results of a survey with 95 professional developers about performance issues of AngularJS applications. We report common practices followed by developers to avoid performance problems (e.g., use of third-party or custom components), the general causes of performance problems in AngularJS applications (e.g., inadequate architecture decisions taken by AngularJS users), a...

Relationship Between Hospital Performance on a Patient Satisfaction Survey and Surgical Quality.

Science.gov (United States)

Sacks, Greg D; Lawson, Elise H; Dawes, Aaron J; Russell, Marcia M; Maggard-Gibbons, Melinda; Zingmond, David S; Ko, Clifford Y

2015-09-01

The Centers for Medicare and Medicaid Services include patient experience as a core component of its Value-Based Purchasing program, which ties financial incentives to hospital performance on a range of quality measures. However, it remains unclear whether patient satisfaction is an accurate marker of high-quality surgical care. To determine whether hospital performance on a patient satisfaction survey is associated with objective measures of surgical quality. Retrospective observational study of participating American College of Surgeons National Surgical Quality Improvement Project (ACS NSQIP) hospitals. We used data from a linked database of Medicare inpatient claims, ACS NSQIP, the American Hospital Association annual survey, and Hospital Compare from December 2, 2004, through December 31, 2008. A total of 103 866 patients older than 65 years undergoing inpatient surgery were included. Hospitals were grouped by quartile based on their performance on the Hospital Consumer Assessment of Healthcare Providers and Systems survey. Controlling for preoperative risk factors, we created hierarchical logistic regression models to predict the occurrence of adverse postoperative outcomes based on a hospital's patient satisfaction scores. Thirty-day postoperative mortality, major and minor complications, failure to rescue, and hospital readmission. Of the 180 hospitals, the overall mean patient satisfaction score was 68.0% (first quartile mean, 58.7%; fourth quartile mean, 76.7%). Compared with patients treated at hospitals in the lowest quartile, those at the highest quartile had significantly lower risk-adjusted odds of death (odds ratio = 0.85; 95% CI, 0.73-0.99), failure to rescue (odds ratio = 0.82; 95% CI, 0.70-0.96), and minor complication (odds ratio = 0.87; 95% CI, 0.75-0.99). This translated to relative risk reductions of 11.1% (P = .04), 12.6% (P = .02), and 11.5% (P = .04), respectively. No significant relationship was noted between patient satisfaction

Measuring the effect of e-business on organizational performance in project based organizations

Directory of Open Access Journals (Sweden)

Soheil Sadi-Nezhad

2017-12-01

Full Text Available Recently, there have been significant development on e-business and nearly all business partners try to offer their products and services via internet. One primary question for the implementation of e-business is to measure the effect of this new facility on supply chain in project based organizations. Although e-business may not directly influence on organizational performance, it definitely influences on unifying customers and suppliers, which yields to a better performance of organizations. This study performs a study to measure the indirect effect of e-business on project based organizational performance. The proposed study of this paper designs a questionnaire and distributes it among 140 professional experts in different industries in province of Ontario, Canada. The survey examines different hypotheses for a possible correlation between e-business and integrated suppliers, e-business and customers, integrated customers and suppliers with organizational performance. The results of this survey indicate a positive relationship between all these components either directly or indirectly.

Management-by-Results and Performance Measurement in Universities--Implications for Work Motivation

Science.gov (United States)

Kallio, Kirsi-Mari; Kallio, Tomi J.

2014-01-01

The article focuses on the effects of management-by-results from the perspective of the work motivation of university employees. The study is based on extensive survey data among employees at Finnish universities. According to the results, performance measurement is based on quantitative rather than qualitative measures, and the current…

MEASUREMENT OF FRICTIONAL PRESSURE DIFFERENTIALS DURING A VENTILATION SURVEY

International Nuclear Information System (INIS)

B.S. Prosser, PE; I.M. Loomis, PE, PhD

2003-01-01

During the course of a ventilation survey, both airflow quantity and frictional pressure losses are measured and quantified. The measurement of airflow has been extensively studied as the vast majority of ventilation standards/regulations are tied to airflow quantity or velocity. However, during the conduct of a ventilation survey, measurement of airflow only represents half of the necessary parameters required to directly calculate the airway resistance. The measurement of frictional pressure loss is an often misunderstood and misapplied part of the ventilation survey. This paper compares the two basic methods of frictional pressure drop measurements; the barometer and the gauge and tube. Personal experiences with each method will be detailed along with the authors' opinions regarding the applicability and conditions favoring each method

Laser Scanning in Engineering Surveying: Methods of Measurement and Modeling of Structures

Directory of Open Access Journals (Sweden)

Lenda Grzegorz

2016-06-01

Full Text Available The study is devoted to the uses of laser scanning in the field of engineering surveying. It is currently one of the main trends of research which is developed at the Department of Engineering Surveying and Civil Engineering at the Faculty of Mining Surveying and Environmental Engineering of AGH University of Science and Technology in Krakow. They mainly relate to the issues associated with tower and shell structures, infrastructure of rail routes, or development of digital elevation models for a wide range of applications. These issues often require the use of a variety of scanning techniques (stationary, mobile, but the differences also regard the planning of measurement stations and methods of merging point clouds. Significant differences appear during the analysis of point clouds, especially when modeling objects. Analysis of the selected parameters is already possible basing on ad hoc measurements carried out on a point cloud. However, only the construction of three-dimensional models provides complete information about the shape of structures, allows to perform the analysis in any place and reduces the amount of the stored data. Some structures can be modeled in the form of simple axes, sections, or solids, for others it becomes necessary to create sophisticated models of surfaces, depicting local deformations. The examples selected for the study allow to assess the scope of measurement and office work for a variety of uses related to the issue set forth in the title of this study. Additionally, the latest, forward-looking technology was presented - laser scanning performed from Unmanned Aerial Vehicles (drones. Currently, it is basically in the prototype phase, but it might be expected to make a significant progress in numerous applications in the field of engineering surveying.

Associations between structural capabilities of primary care practices and performance on selected quality measures.

Science.gov (United States)

Friedberg, Mark W; Coltin, Kathryn L; Safran, Dana Gelb; Dresser, Marguerite; Zaslavsky, Alan M; Schneider, Eric C

2009-10-06

Recent proposals to reform primary care have encouraged physician practices to adopt such structural capabilities as performance feedback and electronic health records. Whether practices with these capabilities have higher performance on measures of primary care quality is unknown. To measure associations between structural capabilities of primary care practices and performance on commonly used quality measures. Cross-sectional analysis. Massachusetts. 412 primary care practices. During 2007, 1 physician from each participating primary care practice (median size, 4 physicians) was surveyed about structural capabilities of the practice (responses representing 308 practices were obtained). Data on practice structural capabilities were linked to multipayer performance data on 13 Healthcare Effectiveness Data and Information Set (HEDIS) process measures in 4 clinical areas: screening, diabetes, depression, and overuse. Frequently used multifunctional electronic health records were associated with higher performance on 5 HEDIS measures (3 in screening and 2 in diabetes), with statistically significant differences in performance ranging from 3.1 to 7.6 percentage points. Frequent meetings to discuss quality were associated with higher performance on 3 measures of diabetes care (differences ranging from 2.3 to 3.1 percentage points). Physician awareness of patient experience ratings was associated with higher performance on screening for breast cancer and cervical cancer (1.9 and 2.2 percentage points, respectively). No other structural capabilities were associated with performance on more than 1 measure. No capabilities were associated with performance on depression care or overuse. Structural capabilities of primary care practices were assessed by physician survey. Among the investigated structural capabilities of primary care practices, electronic health records were associated with higher performance across multiple HEDIS measures. Overall, the modest magnitude and

Psychometric properties of the Survey of Personal Beliefs: a rational-emotive measure of irrational thinking.

Science.gov (United States)

Demaria, T P; Kassinove, H; Dill, C A

1989-01-01

A test consistency and confirmatory factor analyses were performed on the Survey of Personal Beliefs, a new measure of irrational thinking based on rational-emotive personality theory. The survey, which was logically derived, includes a general rationality factor and subscales measuring five hypothesized core categories of irrational beliefs. Subjects included a nonclinical sample of 130 men and 150 women, with a mean age of 46. Results indicated that the Survey of Personal Beliefs had satisfactory total and scale reliability. The confirmatory analyses supported a higher order factor model including 5 first-order factors ( awfulizing, self-directed shoulds, other-directed shoulds, low frustration tolerance, and self-worth) and 1 second-order or general factor.

TQM and firms performance: An EFQM excellence model research based survey

Directory of Open Access Journals (Sweden)

Santos-Vijande, M. L.

2007-01-01

Full Text Available The purpose of this article is to develop an instrument for measuring TQM implementation following the European Foundation for Quality Management Excellence Model and to provide empirical evidence on the relationship between management practices and measures of business performance in the model. To this end, the study employs survey data collected from Spanish manufacturing and service firms. Confirmatory factor analysis is used to test the psychometric properties of the measurement scales and the hypothesized relationships between total quality management practices and organizational performance are examined using structural equation modeling. The findings of the research indicate that the adoption of the TQM practices suggested in the EFQM Excellence Model allows firms to outperform their competitors in the results criteria included in the Model. Therefore, this paper provides a valuable benchmarking data for firms as it substantiates the EFQM Enabler’s contribution to the attainment of competitive advantage.

FACTORS INFLUENCING THE SUCCESS OF PERFORMANCE MEASUREMENT: EVIDENCE FROM LOCAL GOVERNMENT

Directory of Open Access Journals (Sweden)

Herlina Primarisanti

2015-01-01

Full Text Available There were only a few government institutions in Indonesia capable of preparing good accountability reports. Based on the survey conducted in the Special District of Yogyakarta, the study aimed to empirically examine the influencing factors in the development of the measure-ment system of performance, performance accountability and the use of performance informa-tion. Additionally, it also tried to interpret and to explain empirical evidence in the perspective of the institutional theory. The institutional theory was used to find out the extent to which the development of the measurement system of the performance, the performance accountability and the use of the performance information was influenced because of the presence of coercive, mimetic and normative isomorphism phenomena. The study used mixed methods that combined quantitative and qualitative study approaches simultaneously and a sequential explanatory strategy. It used Partial Least Square (PLS analysis to test the hypotheses. It gave evidence that training, incentives and authority in decision making had significant impacts on the development of the measurement of the performance, the performance accountability and the use of the performance information. It contributed to the understanding of the influencing factors of the development of the measurement system of the performance, the performance accountability and the use of the performance information in order to improve the measurement system of the performance of government institutions.

Best practices in selecting performance measures and standards for effective asset management.

Science.gov (United States)

2011-06-01

"This report assesses and provides guidance on best practices in performance measurement, management and standards : setting for effective Transportation Asset Management (TAM). The study is conducted through a literature review, a : survey of the 50...

Nonprobability Web Surveys to Measure Sexual Behaviors and Attitudes in the General Population: A Comparison With a Probability Sample Interview Survey

Science.gov (United States)

Burkill, Sarah; Couper, Mick P; Conrad, Frederick; Clifton, Soazig; Tanton, Clare; Phelps, Andrew; Datta, Jessica; Mercer, Catherine H; Sonnenberg, Pam; Prah, Philip; Mitchell, Kirstin R; Wellings, Kaye; Johnson, Anne M; Copas, Andrew J

2014-01-01

Background Nonprobability Web surveys using volunteer panels can provide a relatively cheap and quick alternative to traditional health and epidemiological surveys. However, concerns have been raised about their representativeness. Objective The aim was to compare results from different Web panels with a population-based probability sample survey (n=8969 aged 18-44 years) that used computer-assisted self-interview (CASI) for sensitive behaviors, the third British National Survey of Sexual Attitudes and Lifestyles (Natsal-3). Methods Natsal-3 questions were included on 4 nonprobability Web panel surveys (n=2000 to 2099), 2 using basic quotas based on age and sex, and 2 using modified quotas based on additional variables related to key estimates. Results for sociodemographic characteristics were compared with external benchmarks and for sexual behaviors and opinions with Natsal-3. Odds ratios (ORs) were used to express differences between the benchmark data and each survey for each variable of interest. A summary measure of survey performance was the average absolute OR across variables. Another summary measure was the number of key estimates for which the survey differed significantly (at the 5% level) from the benchmarks. Results For sociodemographic variables, the Web surveys were less representative of the general population than Natsal-3. For example, for men, the average absolute OR for Natsal-3 was 1.14, whereas for the Web surveys the average absolute ORs ranged from 1.86 to 2.30. For all Web surveys, approximately two-thirds of the key estimates of sexual behaviors were different from Natsal-3 and the average absolute ORs ranged from 1.32 to 1.98. Differences were appreciable even for questions asked by CASI in Natsal-3. No single Web survey performed consistently better than any other did. Modified quotas slightly improved results for men, but not for women. Conclusions Consistent with studies from other countries on less sensitive topics, volunteer Web

Performance Calculations for a Boundary-Layer-Ingesting Fan Stage from Sparse Measurements

Science.gov (United States)

Hirt, Stefanie M.; Wolter, John D.; Arend, David J.; Hearn, Tristan A.; Hardin, Larry W.; Gazzaniga, John A.

2018-01-01

A test of the Boundary Layer Ingesting-Inlet / Distortion-Tolerant Fan was completed in NASA Glenn's 8-Foot by 6-Foot supersonic wind tunnel. Inlet and fan performance were measured by surveys using a set of rotating rake arrays upstream and downstream of the fan stage. Surveys were conducted along the 100 percent speed line and a constant exit corrected flow line passing through the aerodynamic design point. These surveys represented only a small fraction of the data collected during the test. For other operating points, data was recorded as snapshots without rotating the rakes which resulted in a sparser set of recorded data. This paper will discuss analysis of these additional, lower measurement density data points to expand our coverage of the fan map. Several techniques will be used to supplement the snapshot data at test conditions where survey data also exists. The supplemented snapshot data will be compared with survey results to assess the quality of the approach. Effective methods will be used to analyze the data set for which only snapshots exist.

Performance measurement of workplace change: in two different cultural contexts

Directory of Open Access Journals (Sweden)

Chaiwat Riratanaphong

2014-01-01

change in different contexts. Two organisations in Thailand and one organisation in The Netherlands were selected to serve as case studies. The impact of culture was explored as a contextual background. Research methods Based on literature review an overview of performance measurement systems and measures has been developed. The list of corporate real estate performance measures has been classified in six categories according to Bradley (2002 and subsequently compared with the findings from the case studies. The six categories include: 1 stakeholder perception, 2 financial health, 3 organisational development, 4 productivity, 5 environmental responsibility and 6 cost efficiency. The impact of workplace change was examined using the work environment diagnosis instrument (WODI questionnaire which evaluates employees’ responses to the changed work environment in three areas: employee satisfaction, perceived productivity support and prioritised aspects (Maarleveld, et al., 2009. The Organisational Culture Assessment Instrument (OCAI; Cameron and Quinn, 2006 was used to assess organisational culture. National culture was measured by using the Value Survey Module 94 (VSM94; Hofstede, 1997. Research findings The conceptual framework that came to the fore from the literature review showed to be useful for both theoretical understanding of performance measurement and practical applications. Proposed performance measures have been applied in all three case studies but in different ways. The three case studies showed that performance measurement of an organisation is multi-dimensional. It includes several performance criteria and performance measures beyond cost efficiency. All seven performance criteria mentioned by Sink and Tuttle (1989 have been applied in all three cases including effectiveness, efficiency, quality, productivity, quality of worklife, innovation and profitability. The four perspectives of the Balanced Scorecard (financial, customer, internal business process

Cosmological measurements with forthcoming radio continuum surveys

CSIR Research Space (South Africa)

Raccanelli, A

2012-08-01

Full Text Available , while the best measurements of dark energy models will come from galaxy autocorrelation function analyses. Using a combination of the EvolutionaryMap of the Universe (EMU) and WODAN to provide a full-sky survey, it will be possible to measure the dark...

A survey on exploring key performance indicators

Directory of Open Access Journals (Sweden)

Mohammed Badawy

2016-12-01

Full Text Available Key Performance Indicators (KPIs allows gathering knowledge and exploring the best way to achieve organization goals. Many researchers have provided different ideas for determining KPI's either manually, and semi-automatic, or automatic which is applied in different fields. This work concentrates on providing a survey of different approaches for exploring and predicting key performance indicators (KPIs.

The effects of performance measurement and compensation on motivation: An empirical study

NARCIS (Netherlands)

van Herpen, M.; van Praag, C.M.; Cools, K.

2003-01-01

The design and implementation of a performance measurement and compensation system can strongly affect the motivation of employees. Building on economic and psychological theory this study develops a conceptual model that is used to empirically test this effect. Our survey results demonstrate a

Hospital safety climate surveys: measurement issues.

Science.gov (United States)

Jackson, Jeanette; Sarac, Cakil; Flin, Rhona

2010-12-01

Organizational safety culture relates to behavioural norms in the workplace and is usually assessed by safety climate surveys. These can be a diagnostic indicator on the state of safety in a hospital. This review examines recent studies using staff surveys of hospital safety climate, focussing on measurement issues. Four questionnaires (hospital survey on patient safety culture, safety attitudes questionnaire, patient safety climate in healthcare organizations, hospital safety climate scale), with acceptable psychometric properties, are now applied across countries and clinical settings. Comparisons for benchmarking must be made with caution in case of questionnaire modifications. Increasing attention is being paid to the unit and hospital level wherein distinct cultures may be located, as well as to associated measurement and study design issues. Predictive validity of safety climate is tested against safety behaviours/outcomes, with some relationships reported, although effects may be specific to professional groups/units. Few studies test the role of intervening variables that could influence the effect of climate on outcomes. Hospital climate studies are becoming a key component of healthcare safety management systems. Large datasets have established more reliable instruments that allow a more focussed investigation of the role of culture in the improvement and maintenance of staff's safety perceptions within units, as well as within hospitals.

Simulating the Performance of Ground-Based Optical Asteroid Surveys

Science.gov (United States)

Christensen, Eric J.; Shelly, Frank C.; Gibbs, Alex R.; Grauer, Albert D.; Hill, Richard E.; Johnson, Jess A.; Kowalski, Richard A.; Larson, Stephen M.

2014-11-01

We are developing a set of asteroid survey simulation tools in order to estimate the capability of existing and planned ground-based optical surveys, and to test a variety of possible survey cadences and strategies. The survey simulator is composed of several layers, including a model population of solar system objects and an orbital integrator, a site-specific atmospheric model (including inputs for seeing, haze and seasonal cloud cover), a model telescope (with a complete optical path to estimate throughput), a model camera (including FOV, pixel scale, and focal plane fill factor) and model source extraction and moving object detection layers with tunable detection requirements. We have also developed a flexible survey cadence planning tool to automatically generate nightly survey plans. Inputs to the cadence planner include camera properties (FOV, readout time), telescope limits (horizon, declination, hour angle, lunar and zenithal avoidance), preferred and restricted survey regions in RA/Dec, ecliptic, and Galactic coordinate systems, and recent coverage by other asteroid surveys. Simulated surveys are created for a subset of current and previous NEO surveys (LINEAR, Pan-STARRS and the three Catalina Sky Survey telescopes), and compared against the actual performance of these surveys in order to validate the model’s performance. The simulator tracks objects within the FOV of any pointing that were not discovered (e.g. too few observations, too trailed, focal plane array gaps, too fast or slow), thus dividing the population into “discoverable” and “discovered” subsets, to inform possible survey design changes. Ongoing and future work includes generating a realistic “known” subset of the model NEO population, running multiple independent simulated surveys in coordinated and uncoordinated modes, and testing various cadences to find optimal strategies for detecting NEO sub-populations. These tools can also assist in quantifying the efficiency of novel

A Survey on Security-Aware Measurement in SDN

Directory of Open Access Journals (Sweden)

Heng Zhang

2018-01-01

Full Text Available Software-defined networking (SDN is one of the most prevailing networking paradigms in current and next-generation networks. Basically, the highly featured separation of control and data planes makes SDN a proper solution towards many practical problems that challenge legacy networks, for example, energy efficiency, dynamic network configuration, agile network measurement, and flexible network deployment. Although the SDN and its applications have been extensively studied for several years, the research of SDN security is still in its infancy. Typically, the SDN suffers from architecture defect and OpenFlow protocol loopholes such as single controller problem, deficiency of communication verification, and network resources constraint. Hence, network measurement is a fundamental technique of protecting SDN against the above security threats. Specifically, network measurement aims to understand and quantify a variety of network behaviors to facilitate network management and monitoring, anomaly detection, network troubleshooting, and the establishment of security mechanisms. In this paper, we present a systematic survey on security-aware measurement technology in SDN. In particular, we first review the basic architecture of SDN and corresponding security challenges. Then, we investigate two performance measurement techniques in SDN, namely, link latency and available bandwidth measurements. After that, we further provide a general overview of topology measurement in SDN including intradomain and interdomain topology discovering techniques. Finally, we list three interesting future directions of security-aware measurement in SDN followed by giving conclusion remarks.

Questionnaire survey report on measurement of radioactivity in working environment of radioisotopes facility

International Nuclear Information System (INIS)

Kawano, Takao; Nomura, Kiyoshi

2008-01-01

To look over the current measurement of radioactivity concentration in working environment of many radioisotopes facilities, a questionnaire survey was carried out under the auspices of the Planning Committee of the Japan Society of Radiation Safety Management. 64 responses were obtained in 128 radiation facilities, which the questionnaires were sent to. The main results were obtained by aggregate analysis of the answers for questionnaires as the followings. Major nuclides subject to measurement were 3 H, 14 C, 32 P and 125 I Sampling of radioisotopes in air was mainly performed using collectors like dust samplers and HC-collectors. Liquid scintillation counters and gamma counters were used to measure β and γ radioactivity contained in airborne particles or gas samples. Contamination by radioactivity was not detected in 55% facilities surveyed, but in 40% facilities at the same level as or at lower levels than a hundredth part of the regulated concentration limit of each nuclide. Almost all facilities is found to consider that the measurement of radioactivity concentration in working environments is not always necessary. (author)

The Effects Of Leadership Styles On Goal Clarity And Fairness Mediated Used Performance Measure

Directory of Open Access Journals (Sweden)

Amris Rusli Tanjung

2017-04-01

Full Text Available This paper investigate the effects of superiors performance evaluation behaviors on subordinates work-related attitudes mediated used performance measure. We used leadership style initiating structure and consideration and performance measure use objective and subjective measures on managerial work related attitudes goal clarity and evaluation fairness. We test our hypotheses using survey data from 56 middle-level managers in 4 services organizations. The results from Structural Equation Model with PLS show that an initiating structure leadership style has significant effect goal clarity and used objective performance measure mediated relationship initiating structure and goal clarity and used subjective performance measure not mediated relationship consideration leadership style and fairness in evaluation. Consideration leadership behavior instead only has a direct impact on fairness in evaluation. These findings have important implications for management accounting research on superiors use of performance measures and provide an explanation of some of the problematic findings in the literature.

The role of non-financial performance measures in predicting hospital financial performance: the case of for-profit system hospitals.

Science.gov (United States)

Vélez-González, Heltie; Pradhan, Rohit; Weech-Maldonado, Robert

2011-01-01

Non-financial measures have found increasing acceptance in the business world--however, their application in the health care industry remains limited. The purpose of this article is to understand the influence of non-financial measures (efficiency, productivity, and quality) on the financial performance of for-profit system hospitals. The sample consists of 499 for-profit system hospitals in the United States from 1999 to 2002. Data analyzed include the American Hospital Association's Annual Survey, Medicare Cost Reports, Joint Commission's quality scores, and the Centers for Medicare & Medicaid Services' Hospital Case Mix Index. Dependent variables consist of financial measures (operating and total margins), while independent variables include measures of efficiency, productivity, and quality. Our results suggest the influence of non-financial performance measures on financial performance; occupancy rate positively influences financial performance while greater labor intensity may have negative implications for financial performance. In addition, we show that quality positively influences financial performance thereby offering a potential business case for quality. This result has important managerial and policy implications as it may incentivize capital and human resource investments required to improve hospital quality of care.

Performance Measurement und Environmental Performance Measurement

OpenAIRE

Sturm, Anke

2000-01-01

Die Zielsetzung der vorliegenden Dissertationsschrift besteht in der Entwicklung einer systematisierten Vorgehensweise, eines Controllingmodells, zur unternehmensinternen Umweltleistungsmessung. Das entwickelte Environmental Performance Measurement (EPM)-Modell umfaßt die fünf Stufen Festlegung der Ziele der Umweltleistungsmessung (1. Stufe), Erfassung der Umwelteinflüsse nach der ökologischen Erfolgsspaltung (2. Stufe), Bewertung der Umwelteinflüsse auf der Grundlage des qualitätszielbezogen...

Measuring Sexual Violence on Campus: Climate Surveys and Vulnerable Groups

Science.gov (United States)

de Heer, Brooke; Jones, Lynn

2017-01-01

Since the 2014 "Not Alone" report on campus sexual assault, the use of climate surveys to measure sexual violence on campuses across the United States has increased considerably. The current study utilizes a quasi meta-analysis approach to examine the utility of general campus climate surveys, which include a measure of sexual violence,…

Balanced leadership, professionalism, and team trust predict positive attitudes towards performance measurement

NARCIS (Netherlands)

Wilderom, Celeste P.M.; Wouters, Marc; van Brussel, J.; Solomon, G.T.

2007-01-01

In our four-year study, we advised the Logistics unit of a medium-sized Dutch firm during their development of their unit's performance measurement system (PMS). We gathered four sets of quantitative survey data, involving a panel of 42 Logistics employees. At the end of this time frame, we found

Individual Social Capital and Its Measurement in Social Surveys

Directory of Open Access Journals (Sweden)

Keming Yang

2007-01-01

Full Text Available With its popularity has come an unresolved issue about social capital: is it an individual or a collective property, or both? Many researchers take it for granted that social capital is collective, but most social surveys implicitly measure social capital at the individual level. After reviewing the definitions by Bourdieu, Coleman, and Putnam, I become to agree with Portes that social capital can be an individual asset and should be firstly analyzed as such; if social capital is to be analyzed as a collective property, then the analysis should explicitly draw on a clear definition of individual social capital. I thus define individual social capital as the features of social groups or networks that each individual member can access and use for obtaining further benefits. Four types of features are identified (basic, specific, generalized, and structural, and example formulations of survey questions are proposed. Following this approach, I then assess some survey questions organized under five themes commonly found in social surveys for measuring social capital: participation in organizations, social networks, trust, civic participation, and perceptions of local area. I conclude that most of these themes and questions only weakly or indirectly measure individual social capital; therefore, they should be strengthened with the conceptual framework proposed in this paper and complemented with the items used in independent surveys on social networks.

A Long-Term Performance Enhancement Method for FOG-Based Measurement While Drilling.

Science.gov (United States)

Zhang, Chunxi; Lin, Tie

2016-07-28

In the oil industry, the measurement-while-drilling (MWD) systems are usually used to provide the real-time position and orientation of the bottom hole assembly (BHA) during drilling. However, the present MWD systems based on magnetic surveying technology can barely ensure good performance because of magnetic interference phenomena. In this paper, a MWD surveying system based on a fiber optic gyroscope (FOG) was developed to replace the magnetic surveying system. To accommodate the size of the downhole drilling conditions, a new design method is adopted. In order to realize long-term and high position precision and orientation surveying, an integrated surveying algorithm is proposed based on inertial navigation system (INS) and drilling features. In addition, the FOG-based MWD error model is built and the drilling features are analyzed. The state-space system model and the observation updates model of the Kalman filter are built. To validate the availability and utility of the algorithm, the semi-physical simulation is conducted under laboratory conditions. The results comparison with the traditional algorithms show that the errors were suppressed and the measurement precision of the proposed algorithm is better than the traditional ones. In addition, the proposed method uses a lot less time than the zero velocity update (ZUPT) method.

Strategic Measures of Teacher Performance

Science.gov (United States)

Milanowski, Anthony

2011-01-01

Managing the human capital in education requires measuring teacher performance. To measure performance, administrators need to combine measures of practice with measures of outcomes, such as value-added measures, and three measurement systems are needed: classroom observations, performance assessments or work samples, and classroom walkthroughs.…

Performance of Ductless Personalized Ventilation in Open-Plan Office - Field Survey

DEFF Research Database (Denmark)

Dalewski, Mariusz; Ezzat Khalifa, H.; Melikov, Arsen Krikor

2013-01-01

A field survey was conducted in an architectural company located in Syracuse, USA. 54 employees who participated in the survey performed mostly design work. Large open-plan office and several single offices ventilated by displacement air distribution were included in the survey. Ductless...

University Performance Evaluations: What Are We Really Measuring?

Science.gov (United States)

Bedggood, Rowan E.; Donovan, Jerome D.

2012-01-01

Surveying students to garner feedback on teaching and subject quality is a common occurrence in many universities globally. Despite the criticisms surrounding whether measures associated with these surveys are indeed valid, university managers continue to utilise them in key decision making. These surveys mirror business practices where measuring…

Survey on quality control measurements for nuclear medicine imaging equipment in Finland in 2006

International Nuclear Information System (INIS)

Korpela, Helinae; Niemelae, Jarkko

2008-01-01

Routine quality control (QC) is an essential requirement in nuclear medicine (NM) in order to ensure optimal functioning of equipment. To harmonise the routine QC of NM imaging equipment in Finnish hospital s (planar gamma cameras, SPECT, coincidence gamma cameras, PET), the Radiation and Nuclear Safety Authority (STUK) will publish guidelines on QC in collaboration with several hospital physicists. Recommendations will be provided on routine QC measurements and on the frequency of testing. It is also planned to provide recommendations for the acceptance criteria when assessing different performance parameters for NM imaging equipment. In order to determine what performance parameters of NM equipment are currently measured in hospitals, how frequently they are measured and what acceptance criteria are used, a survey was carried out on the QC of NM equipment in Finland during 2006. (author)

Comparing Two Inferential Approaches to Handling Measurement Error in Mixed-Mode Surveys

Directory of Open Access Journals (Sweden)

Buelens Bart

2017-06-01

Full Text Available Nowadays sample survey data collection strategies combine web, telephone, face-to-face, or other modes of interviewing in a sequential fashion. Measurement bias of survey estimates of means and totals are composed of different mode-dependent measurement errors as each data collection mode has its own associated measurement error. This article contains an appraisal of two recently proposed methods of inference in this setting. The first is a calibration adjustment to the survey weights so as to balance the survey response to a prespecified distribution of the respondents over the modes. The second is a prediction method that seeks to correct measurements towards a benchmark mode. The two methods are motivated differently but at the same time coincide in some circumstances and agree in terms of required assumptions. The methods are applied to the Labour Force Survey in the Netherlands and are found to provide almost identical estimates of the number of unemployed. Each method has its own specific merits. Both can be applied easily in practice as they do not require additional data collection beyond the regular sequential mixed-mode survey, an attractive element for national statistical institutes and other survey organisations.

The Servant Leadership Survey: Development and Validation of a Multidimensional Measure.

Science.gov (United States)

van Dierendonck, Dirk; Nuijten, Inge

2011-09-01

PURPOSE: The purpose of this paper is to describe the development and validation of a multi-dimensional instrument to measure servant leadership. DESIGN/METHODOLOGY/APPROACH: Based on an extensive literature review and expert judgment, 99 items were formulated. In three steps, using eight samples totaling 1571 persons from The Netherlands and the UK with a diverse occupational background, a combined exploratory and confirmatory factor analysis approach was used. This was followed by an analysis of the criterion-related validity. FINDINGS: The final result is an eight-dimensional measure of 30 items: the eight dimensions being: standing back, forgiveness, courage, empowerment, accountability, authenticity, humility, and stewardship. The internal consistency of the subscales is good. The results show that the Servant Leadership Survey (SLS) has convergent validity with other leadership measures, and also adds unique elements to the leadership field. Evidence for criterion-related validity came from studies relating the eight dimensions to well-being and performance. IMPLICATIONS: With this survey, a valid and reliable instrument to measure the essential elements of servant leadership has been introduced. ORIGINALITY/VALUE: The SLS is the first measure where the underlying factor structure was developed and confirmed across several field studies in two countries. It can be used in future studies to test the underlying premises of servant leadership theory. The SLS provides a clear picture of the key servant leadership qualities and shows where improvements can be made on the individual and organizational level; as such, it may also offer a valuable starting point for training and leadership development.

Sloan Digital Sky Survey: Performance and Lessons Learned from the First Two Years of Operations

Science.gov (United States)

Boroski, William N.; Gunn, James E.; Kron, Richard G.; Peoples, John, Jr.

2002-12-01

Over a 5-year observing period, the Sloan Digital Sky Survey (SDSS) will acquire data to construct a digital 5-color photometric map of the Northern Galactic sky to about 23rd magnitude, and a correspondingly large and homogeneous spectroscopic survey. The SDSS is in a unique class of projects, in that all aspects of the SDSS infrastructure, from the telescopes and instruments, to software and operations staffing, were designed and assembled specifically to conduct this Survey. To ensure success, observing operations are run in production mode and performance metrics are used to measure progress over time. The methodology of preparing the performance baseline plan, and an assessment of Survey progress after two full years of operation, are reviewed and some lessons learned discussed. In particular, the SDSS has benefited greatly by asking peers in the field to participate in external reviews that periodically assess performance and offer independent, fresh views of potential areas of concerns. Additionally, difficulties caused by the absence of an experienced systems-engineering staff during the final phase of construction and commissioning are reviewed. The challenges of building a production machine out of complex and state-of-the-art sub-systems cannot be overstated. In the case of the SDSS, insufficient systems engineering led to problems meeting initial image quality requirements, primarily because of problems with the thermal performance of the telescope and its environment. A concerted campaign to deal with these issues was successful, but that success came rather later than we would have liked. The improvements made to address the situation, and the resulting increase in operational performance, are discussed.

Belief Control Practices and Organizational Performances: A Survey ...

African Journals Online (AJOL)

Belief Control Practices and Organizational Performances: A Survey of Sugar Industry in Kenya. ... employees in the company core values and design of strategic control systems to cope with changing internal and external operating business ...

Evaluation of a survey tool to measure safety climate in Australian hospital pharmacy staff.

Science.gov (United States)

Walpola, Ramesh L; Chen, Timothy F; Fois, Romano A; Ashcroft, Darren M; Lalor, Daniel J

Safety climate evaluation is increasingly used by hospitals as part of quality improvement initiatives. Consequently, it is necessary to have validated tools to measure changes. To evaluate the construct validity and internal consistency of a survey tool to measure Australian hospital pharmacy patient safety climate. A 42 item cross-sectional survey was used to evaluate the patient safety climate of 607 Australian hospital pharmacy staff. Survey responses were initially mapped to the factor structure previously identified in European community pharmacy. However, as the data did not adequately fit the community pharmacy model, participants were randomly split into two groups with exploratory factor analysis performed on the first group (n = 302) and confirmatory factor analyses performed on the second group (n = 305). Following exploratory factor analysis (59.3% variance explained) and confirmatory factor analysis, a 6-factor model containing 28 items was obtained with satisfactory model fit (χ 2 (335) = 664.61 p  0.643) and model nesting between the groups (Δχ 2 (22) = 30.87, p = 0.10). Three factors (blame culture, organisational learning and working conditions) were similar to those identified in European community pharmacy and labelled identically. Three additional factors (preoccupation with improvement; comfort to question authority; and safety issues being swept under the carpet) highlight hierarchical issues present in hospital settings. This study has demonstrated the validity of a survey to evaluate patient safety climate of Australian hospital pharmacy staff. Importantly, this validated factor structure may be used to evaluate changes in safety climate over time. Copyright © 2016 Elsevier Inc. All rights reserved.

Methodologies for Measuring Judicial Performance: The Problem of Bias

Directory of Open Access Journals (Sweden)

Jennifer Elek

2014-12-01

Full Text Available Concerns about gender and racial bias in the survey-based evaluations of judicial performance common in the United States have persisted for decades. Consistent with a large body of basic research in the psychological sciences, recent studies confirm that the results from these JPE surveys are systematically biased against women and minority judges. In this paper, we explain the insidious manner in which performance evaluations may be biased, describe some techniques that may help to reduce expressions of bias in judicial performance evaluation surveys, and discuss the potential problem such biases may pose in other common methods of performance evaluation used in the United States and elsewhere. We conclude by highlighting the potential adverse consequences of judicial performance evaluation programs that rely on biased measurements. Durante décadas ha habido una preocupación por la discriminación por género y racial en las evaluaciones del rendimiento judicial basadas en encuestas, comunes en Estados Unidos. De acuerdo con un gran corpus de investigación básica en las ciencias psicológicas, estudios recientes confirman que los resultados de estas encuestas de evaluación del rendimiento judicial están sistemáticamente sesgados contra las mujeres y los jueces de minorías. En este artículo se explica la manera insidiosa en que las evaluaciones de rendimiento pueden estar sesgadas, se describen algunas técnicas que pueden ayudar a reducir las expresiones de sesgo en los estudios de evaluación del rendimiento judicial, y se debate el problema potencial que estos sesgos pueden plantear en otros métodos comunes de evaluación del rendimiento utilizados en Estados Unidos y otros países. Se concluye destacando las posibles consecuencias adversas de los programas de evaluación del rendimiento judicial que se basan en mediciones sesgadas. DOWNLOAD THIS PAPER FROM SSRN: http://ssrn.com/abstract=2533937

Degree of patient satisfaction with health care performance assesed by marketing surveys.

Science.gov (United States)

Druguş, Daniela; Azoicăi, Doina

2015-01-01

Marketing surveys of the health system collect useful information to develop effective management strategies. The research aim consisted in measuring patient satisfaction with health care quality. The qualitative research was based on an online SurveyMonkey open-ended questionnaire. The analysis of patient satisfaction/dissatisfaction with healthcare professionals was performed in 1838 patients. Correlation analysis allowed the identification of some determinants associated with patient satisfaction. The variable most commonly associated with satisfaction was "I got adequate information about procedures/treatment" according to 32.2% of respondents. The patients who were dissatisfied most commonly complained that they were "Not adequately informed about maneuvers and treatment", reported by 40.0% of respondents. This study provides a basis for building an original model for determining the variables of an efficient healthcare system which to ensure a high degree of patient satisfaction.

Measuring the performance of maintenance service outsourcing.

Science.gov (United States)

Cruz, Antonio Miguel; Rincon, Adriana Maria Rios; Haugan, Gregory L

2013-01-01

The aims of this paper are (1) to identify the characteristics of maintenance service providers that directly impact maintenance service quality, using 18 independent covariables; (2) to quantify the change in risk these covariables present to service quality, measured in terms of equipment turnaround time (TAT). A survey was applied to every maintenance service provider (n = 19) for characterization purposes. The equipment inventory was characterized, and the TAT variable recorded and monitored for every work order of each service provider (N = 1,025). Finally, the research team conducted a statistical analysis to accomplish the research objectives. The results of this study offer strong empirical evidence that the most influential variables affecting the quality of maintenance service performance are the following: type of maintenance, availability of spare parts in the country, user training, technological complexity of the equipment, distance between the company and the hospital, and the number of maintenance visits performed by the company. The strength of the results obtained by the Cox model built are supported by the measure of the Rp,e(2) = 0.57 with a value of Rp,e= 0.75. Thus, the model explained 57% of the variation in equipment TAT, with moderate high positive correlation between the dependent variable (TAT) and independent variables.

Case-mix adjustment and the comparison of community health center performance on patient experience measures.

Science.gov (United States)

Johnson, M Laura; Rodriguez, Hector P; Solorio, M Rosa

2010-06-01

To assess the effect of case-mix adjustment on community health center (CHC) performance on patient experience measures. A Medicaid-managed care plan in Washington State collected patient survey data from 33 CHCs over three fiscal quarters during 2007-2008. The survey included three composite patient experience measures (6-month reports) and two overall ratings of care. The analytic sample includes 2,247 adult patients and 2,859 adults reporting for child patients. We compared the relative importance of patient case-mix adjusters by calculating each adjuster's predictive power and variability across CHCs. We then evaluated the impact of case-mix adjustment on the relative ranking of CHCs. Important case-mix adjusters included adult self-reported health status or parent-reported child health status, adult age, and educational attainment. The effects of case-mix adjustment on patient reports and ratings were different in the adult and child samples. Adjusting for race/ethnicity and language had a greater impact on parent reports than adult reports, but it impacted ratings similarly across the samples. The impact of adjustment on composites and ratings was modest, but it affected the relative ranking of CHCs. To ensure equitable comparison of CHC performance on patient experience measures, reports and ratings should be adjusted for adult self-reported health status or parent-reported child health status, adult age, education, race/ethnicity, and survey language. Because of the differential impact of case-mix adjusters for child and adult surveys, initiatives should consider measuring and reporting adult and child scores separately.

Measurement of innovation in South Africa: An analysis of survey metrics and recommendations

Directory of Open Access Journals (Sweden)

Sibusiso T. Manzini

2015-11-01

Full Text Available The National System of Innovation (NSI is an important construct in South Africa’s policy discourse as illustrated in key national planning initiatives, such as the National Development Plan. The country’s capacity to innovate is linked to the prospects for industrial development leading to social and economic growth. Proper measurement of innovation activity is therefore crucial for policymaking. In this study, a constructive analytical critique of the innovation surveys that are conducted in South Africa is presented, the case for broadening current perspectives of innovation in the national policy discourse is reinforced, the significance of a broad perspective of innovation is demonstrated and new metrics for use in the measurement of the performance of the NSI are proposed. Current NSI survey instruments lack definition of non-technological innovation. They emphasise inputs rather than outputs, lack regional and sectoral analyses, give limited attention to innovation diffusion and are susceptible to respondent interpretation. Furthermore, there are gaps regarding the wider conditions of innovation and system linkages and learning. In order to obtain a comprehensive assessment of innovation in South Africa, there is a need to sharpen the metrics for measuring non-technological innovation and to define, account for and accurately measure the ‘hidden’ innovations that drive the realisation of value in management, the arts, public service and society in general. The new proposed indicators, which are mostly focused on innovation outputs, can be used as a basis for plugging the gaps identified in the existing surveys.

A Survey of Binary Similarity and Distance Measures

Directory of Open Access Journals (Sweden)

Seung-Seok Choi

2010-02-01

Full Text Available The binary feature vector is one of the most common representations of patterns and measuring similarity and distance measures play a critical role in many problems such as clustering, classification, etc. Ever since Jaccard proposed a similarity measure to classify ecological species in 1901, numerous binary similarity and distance measures have been proposed in various fields. Applying appropriate measures results in more accurate data analysis. Notwithstanding, few comprehensive surveys on binary measures have been conducted. Hence we collected 76 binary similarity and distance measures used over the last century and reveal their correlations through the hierarchical clustering technique.

Developing Effective Performance Measures

Science.gov (United States)

2014-10-14

University When Performance Measurement Goes Bad Laziness Vanity Narcissism Too Many Pettiness Inanity 52 Developing Effective...Kasunic, October 14, 2014 © 2014 Carnegie Mellon University Narcissism Measuring performance from the organization’s point of view, rather than from

Establishment of a procedure to calculate the measurement uncertainties in radiation survey meters calibration

International Nuclear Information System (INIS)

Manzoli, J.E.; Potiens, M.P.A.

2000-01-01

The Calibration Laboratory of Sao Paulo calibrates more than one thousand gamma ray survey meters a year; beside other kinds of radiotherapy, radiodiagnostic and radiation protection instruments. It has a standard (600 cm 3 ) cylinder ionization chamber (Nuclear Enterprises Ltd. model 2511/3) traceable to the Brazilian Secondary Standard Dosimetry Laboratory (SSDL) whose instruments are traceable to the BIPM. Annually the beam dosimetry is performed using this chamber and the results are used as the true values for calibration purposes. The uncertainties present in every direct or indirect measurement during the calibration procedure must be evaluated for purposes of laboratory quality control. All calculation steps in the propagation of errors are presented in this work staging from the ionization chamber charge measured with the standard instrument. Such a propagation was made in space and time, considering even the environmental quantities uncertainties. The propagation was necessary in space, because the ionization chamber measurements were performed at only one space position. The time propagation was essential due to the fact that the activity is a peculiar physical quantity which changes with time according to precise relations for a specific radionuclide. The clear indication of every measurement uncertainty is always important to quantify the quality of this measurement. Nowadays the achievement of calibration laboratory quality systems requires the expression of all uncertainties and the procedure used to evaluate it. An example of this procedure in the case of the calibration of a typical portable radiation survey meter is presented. The direct exposure rate instrument measurement was compared with the true value given by the standard instrument properly propagated and all quantities used have their uncertainties shown. (author)

The Politics of Performance Measurement

DEFF Research Database (Denmark)

Bjørnholt, Bente; Larsen, Flemming

2014-01-01

Performance measurements are meant to improve public decision making and organizational performance. But performance measurements are far from always rational tools for problem solving, they are also political instruments. The central question addressed in this article is how performance...... impact on the political decision making process, as the focus on performance goals entails a kind of reductionism (complex problems are simplified), sequential decision making processes (with a division in separate policy issues) and short-sighted decisions (based on the need for making operational goals)....... measurement affects public policy. The aim is to conceptualize the political consequences of performance measurements and of special concern is how performance systems influence how political decisions are made, what kind of political decisions are conceivable, and how they are implemented. The literature...

Bayesian galaxy shape measurement for weak lensing surveys - III. Application to the Canada-France-Hawaii Telescope Lensing Survey

Science.gov (United States)

Miller, L.; Heymans, C.; Kitching, T. D.; van Waerbeke, L.; Erben, T.; Hildebrandt, H.; Hoekstra, H.; Mellier, Y.; Rowe, B. T. P.; Coupon, J.; Dietrich, J. P.; Fu, L.; Harnois-Déraps, J.; Hudson, M. J.; Kilbinger, M.; Kuijken, K.; Schrabback, T.; Semboloni, E.; Vafaei, S.; Velander, M.

2013-03-01

A likelihood-based method for measuring weak gravitational lensing shear in deep galaxy surveys is described and applied to the Canada-France-Hawaii Telescope (CFHT) Lensing Survey (CFHTLenS). CFHTLenS comprises 154 deg2 of multi-colour optical data from the CFHT Legacy Survey, with lensing measurements being made in the i' band to a depth i'AB noise ratio νSN ≳ 10. The method is based on the lensfit algorithm described in earlier papers, but here we describe a full analysis pipeline that takes into account the properties of real surveys. The method creates pixel-based models of the varying point spread function (PSF) in individual image exposures. It fits PSF-convolved two-component (disc plus bulge) models to measure the ellipticity of each galaxy, with Bayesian marginalization over model nuisance parameters of galaxy position, size, brightness and bulge fraction. The method allows optimal joint measurement of multiple, dithered image exposures, taking into account imaging distortion and the alignment of the multiple measurements. We discuss the effects of noise bias on the likelihood distribution of galaxy ellipticity. Two sets of image simulations that mirror the observed properties of CFHTLenS have been created to establish the method's accuracy and to derive an empirical correction for the effects of noise bias.

THE RELATIONSHIP BETWEEN THE USE OF A PERFORMANCE MEASUREMENT SYSTEM, ORGANIZATIONAL FACTORS, ACCOUNTABILITY, AND THE PERFORMANCE OF PUBLIC SECTOR ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Muhammad Ahyaruddin

2016-01-01

Full Text Available This research studies the accountability and performance of public sector organizations. It provides empirical evidence about the relationship between the use of a performance measurement system and the organizational factors of accountability and organizational performance. We investigate the three roles of a performance measurement system (its operational use, incentive use, and exploratory use, and three organizational factors (contractibility, the legislative mandate, and management commitment. A mixed method approach with sequential explanatory design was used to answer the research question. The hypotheses testing used Structural Equation Modelling-Partial Least Square (SEM-PLS. Our findings were based on survey data from 137 SKPD officers in the local government of Yogyakarta Province, and showed that management commitment had a positive association with accountability and organizational performance. We also found a positive association between the legislative mandate and accountability. However, this research did not find any significant association among the three roles of the performance measurement system with accountability and organizational performance. Based on the institutional theory, our findings show substantial contributions by the institutional isomorphism, which was used in an appropriate manner to explain the context of public sector organizations, especially in the local government of Yogyakarta Province.

Survey Relationship between IT-business Alignment and Business Performance: Using Structural Equation Model

Directory of Open Access Journals (Sweden)

amir manian

2009-09-01

Full Text Available In spite of importance of IT deployment, nowadays in many organizations we are witness of appearing problems related to dissatisfaction of business needs due to high investment in the field of IT. The fervent debate concerning IT productivity–or lack of such productivity- named productivity paradox persuade us to survey relationship between IT–business alignment and business performance. The purpose of this research is to investigate whether IT-business alignment could have a decisive influence on their performance in IT-base firms by adopting a contingency theory perspective and operationalizing the fit systemically. Also to measure organizational performance, we adopt BSC framework which is not applied in this matter yet. Finally, this paper will explore the notion that alignment between business and IT is the key to achieving improved business performance through IT.

Organizational and market influences on physician performance on patient experience measures.

Science.gov (United States)

Rodriguez, Hector P; von Glahn, Ted; Rogers, William H; Safran, Dana Gelb

2009-06-01

To examine the extent to which medical group and market factors are related to individual primary care physician (PCP) performance on patient experience measures. This study employs Clinician and Group CAHPS survey data (n=105,663) from 2,099 adult PCPs belonging to 34 diverse medical groups across California. Medical group directors were interviewed to assess the magnitude and nature of financial incentives directed at individual physicians and the adoption of patient experience improvement strategies. Primary care services area (PCSA) data were used to characterize the market environment of physician practices. We used multilevel models to estimate the relationship between medical group and market factors and physician performance on each Clinician and Group CAHPS measure. Models statistically controlled for respondent characteristics and accounted for the clustering of respondents within physicians, physicians within medical groups, and medical groups within PCSAs using random effects. Compared with physicians belonging to independent practice associations, physicians belonging to integrated medical groups had better performance on the communication ( p=.007) and care coordination ( p=.03) measures. Physicians belonging to medical groups with greater numbers of PCPs had better performance on all measures. The use of patient experience improvement strategies was not associated with performance. Greater emphasis on productivity and efficiency criteria in individual physician financial incentive formulae was associated with worse access to care ( p=.04). Physicians located in PCSAs with higher area-level deprivation had worse performance on the access to care ( p=.04) and care coordination ( pintegrated medical groups and groups with greater numbers of PCPs performed better on several patient experience measures, suggesting that organized care processes adopted by these groups may enhance patients' experiences. Physicians practicing in markets with high

Non-Financial Performance Measurement for Shariah Banks : a Survey to Masyarakat Ekonomi Syariah (MES) Surakarta

OpenAIRE

Astuti, Septin Puji; Astika, Hari

2011-01-01

Measurement of non-financial performance in shariah banks is needed to enhance their market share and to maintain their long-term sustainability. The main aim of this research is to show the position of shariah banks in Surakarta in respect with their non-financial aspects (i.e. product, service, human resource and image) based on opinions given by members of Shariah Economic Society (MES) of Surakarta. Extent analysis for Fuzzy Analytic Hierarchy Process is employed to measure the non-financ...

Measuring teamwork in health care settings: a review of survey instruments.

Science.gov (United States)

Valentine, Melissa A; Nembhard, Ingrid M; Edmondson, Amy C

2015-04-01

Teamwork in health care settings is widely recognized as an important factor in providing high-quality patient care. However, the behaviors that comprise effective teamwork, the organizational factors that support teamwork, and the relationship between teamwork and patient outcomes remain empirical questions in need of rigorous study. To identify and review survey instruments used to assess dimensions of teamwork so as to facilitate high-quality research on this topic. We conducted a systematic review of articles published before September 2012 to identify survey instruments used to measure teamwork and to assess their conceptual content, psychometric validity, and relationships to outcomes of interest. We searched the ISI Web of Knowledge database, and identified relevant articles using the search terms team, teamwork, or collaboration in combination with survey, scale, measure, or questionnaire. We found 39 surveys that measured teamwork. Surveys assessed different dimensions of teamwork. The most commonly assessed dimensions were communication, coordination, and respect. Of the 39 surveys, 10 met all of the criteria for psychometric validity, and 14 showed significant relationships to nonself-report outcomes. Evidence of psychometric validity is lacking for many teamwork survey instruments. However, several psychometrically valid instruments are available. Researchers aiming to advance research on teamwork in health care should consider using or adapting one of these instruments before creating a new one. Because instruments vary considerably in the behavioral processes and emergent states of teamwork that they capture, researchers must carefully evaluate the conceptual consistency between instrument, research question, and context.

Insomnia and the Performance of US Workers: Results from the America Insomnia Survey

Science.gov (United States)

Kessler, Ronald C.; Berglund, Patricia A.; Coulouvrat, Catherine; Hajak, Goeran; Roth, Thomas; Shahly, Victoria; Shillington, Alicia C.; Stephenson, Judith J.; Walsh, James K.

2011-01-01

Study Objectives: To estimate the prevalence and associations of broadly defined (i.e., meeting full ICD-10, DSM-IV, or RDC/ICSD-2 inclusion criteria) insomnia with work performance net of comorbid conditions in the America Insomnia Survey (AIS). Design/Setting: Cross-sectional telephone survey. Participants: National sample of 7,428 employed health plan subscribers (ages 18+). Interventions: None. Measurements and Results: Broadly defined insomnia was assessed with the Brief Insomnia Questionnaire (BIQ). Work absenteeism and presenteeism (low on-the-job work performance defined in the metric of lost workday equivalents) were assessed with the WHO Health and Work Performance Questionnaire (HPQ). Regression analysis examined associations between insomnia and HPQ scores controlling 26 comorbid conditions based on self-report and medical/pharmacy claims records. The estimated prevalence of insomnia was 23.2%. Insomnia was significantly associated with lost work performance due to presenteeism (χ21 = 39.5, P absenteeism (χ21 = 3.2, P = 0.07), with an annualized individual-level association of insomnia with presenteeism equivalent to 11.3 days of lost work performance. This estimate decreased to 7.8 days when controls were introduced for comorbid conditions. The individual-level human capital value of this net estimate was $2,280. If we provisionally assume these estimates generalize to the total US workforce, they are equivalent to annualized population-level estimates of 252.7 days and $63.2 billion. Conclusions: Insomnia is associated with substantial workplace costs. Although experimental studies suggest some of these costs could be recovered with insomnia disease management programs, effectiveness trials are needed to obtain precise estimates of return-on-investment of such interventions from the employer perspective. Citation: Kessler RC; Berglund PA; Coulouvrat C; Hajak G; Roth T; Shahly V; Shillington AC; Stephenson JJ; Walsh JK. Insomnia and the performance

Questionnaire survey, Indoor climate measurements and Energy consumption

DEFF Research Database (Denmark)

Knudsen, Henrik Nellemose; Thomsen, Kirsten Engelund; Mørck, Ove

2012-01-01

to be designed and constructed with a heating demand corresponding to the Danish low-energy standard referred to as "low-energy class 1" in a new settlement called Stenløse Syd. This means that the energy consumption is to be 50% lower than the requirement in BR08 (Danish Building Regulations 2008). 66 flats...... were to be designed and constructed with a yearly heating demand of 15 kWh/m². Furthermore, the Concerto community include a kindergarten and an activity centre for elderly people. All the single family houses were to be heated by a heat pump supported by a 3 m² thermal solar system for hot water....... This report presents part of the results of an evaluation of the project that was performed in the settlement. The evaluation consisted of a questionnaire survey of occupant experiences and satisfaction in 35 single-family houses, measurements of energy consumption in 22 selected single-family houses and 58...

45 CFR 305.2 - Performance measures.

Science.gov (United States)

2010-10-01

... PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.2 Performance measures. (a) The child support incentive system measures State performance levels in five program areas... 45 Public Welfare 2 2010-10-01 2010-10-01 false Performance measures. 305.2 Section 305.2 Public...

Manual for the Portable Handheld Neutron Counter (PHNC) for Neutron Survey and the Measurement of Plutonium Samples

International Nuclear Information System (INIS)

Menlove, H.O.

2005-01-01

We have designed a portable neutron detector for passive neutron scanning measurement and coincidence counting of bulk samples of plutonium. The counter will be used for neutron survey applications as well as the measurement of plutonium samples for portable applications. The detector uses advanced design 3 He tubes to increase the efficiency and battery operated shift register electronics. This report describes the hardware, performance, and calibration for the system

Freight performance measures : approach analysis.

Science.gov (United States)

2010-05-01

This report reviews the existing state of the art and also the state of the practice of freight performance measurement. Most performance measures at the state level have aimed at evaluating highway or transit infrastructure performance with an empha...

Towards integrating environmental performance in divisional performance measurement

Directory of Open Access Journals (Sweden)

Collins C Ngwakwe

2014-08-01

Full Text Available This paper suggests an integration of environmental performance measurement (EPM into conventional divisional financial performance measures as a catalyst to enhance managers’ drive toward cleaner production and sustainable development. The approach is conceptual and normative; and using a hypothetical firm, it suggests a model to integrate environmental performance measure as an ancillary to conventional divisional financial performance measures. Vroom’s motivation theory and other literature evidence indicate that corporate goals are achievable in an environment where managers’ efforts are recognised and thus rewarded. Consequently the paper suggests that environmentally motivated managers are important to propel corporate sustainability strategy toward desired corporate environmental governance and sustainable economic development. Thus this suggested approach modestly adds to existing environmental management accounting (EMA theory and literature. It is hoped that this paper may provide an agenda for further research toward a practical application of the suggested method in a firm.

The performance measurement manifesto.

Science.gov (United States)

Eccles, R G

1991-01-01

The leading indicators of business performance cannot be found in financial data alone. Quality, customer satisfaction, innovation, market share--metrics like these often reflect a company's economic condition and growth prospects better than its reported earnings do. Depending on an accounting department to reveal a company's future will leave it hopelessly mired in the past. More and more managers are changing their company's performance measurement systems to track nonfinancial measures and reinforce new competitive strategies. Five activities are essential: developing an information architecture; putting the technology in place to support this architecture; aligning bonuses and other incentives with the new system; drawing on outside resources; and designing an internal process to ensure the other four activities occur. New technologies and more sophisticated databases have made the change to nonfinancial performance measurement systems possible and economically feasible. Industry and trade associations, consulting firms, and public accounting firms that already have well-developed methods for assessing market share and other performance metrics can add to the revolution's momentum--as well as profit from the business opportunities it presents. Every company will have its own key measures and distinctive process for implementing the change. But making it happen will always require careful preparation, perseverance, and the conviction of the CEO that it must be carried through. When one leading company can demonstrate the long-term advantage of its superior performance on quality or innovation or any other nonfinancial measure, it will change the rules for all its rivals forever.

Diagnostic colonoscopy: performance measurement study.

Science.gov (United States)

Kuznets, Naomi

2002-07-01

This is the fifth of a series of best practices studies undertaken by the Performance Measurement Initiative (PMI), the centerpiece of the Institute for Quality Improvement (IQI), a not-for-profit quality improvement subsidiary of the Accreditation Association for Ambulatory Health Care (AAAHC) (Performance Measurement Initiative, 1999a, 1999b, 2000a, 2000b). The IQI was created to offer clinical performance measurement and improvement opportunities to ambulatory health care organizations and others interested in quality patient care. The purpose of the study was to provide opportunities to initiate clinical performance measurement on key processes and outcomes for this procedure and use this information for clinical quality improvement. This article provides performance measurement information on how organizations that have demonstrated and validated differences in clinical practice can have similar outcomes, but at a dramatically lower cost. The intent of the article is to provide organizations with alternatives in practice to provide a better value to their patients.

How to do (or not to do)… Measuring health worker motivation in surveys in low- and middle-income countries

Science.gov (United States)

Borghi, J; Lohmann, J; Dale, E; Meheus, F; Goudge, J; Oboirien, K; Kuwawenaruwa, A

2018-01-01

Abstract A health system’s ability to deliver quality health care depends on the availability of motivated health workers, which are insufficient in many low income settings. Increasing policy and researcher attention is directed towards understanding what drives health worker motivation and how different policy interventions affect motivation, as motivation is key to performance and quality of care outcomes. As a result, there is growing interest among researchers in measuring motivation within health worker surveys. However, there is currently limited guidance on how to conceptualize and approach measurement and how to validate or analyse motivation data collected from health worker surveys, resulting in inconsistent and sometimes poor quality measures. This paper begins by discussing how motivation can be conceptualized, then sets out the steps in developing questions to measure motivation within health worker surveys and in ensuring data quality through validity and reliability tests. The paper also discusses analysis of the resulting motivation measure/s. This paper aims to promote high quality research that will generate policy relevant and useful evidence. PMID:29165641

Performance Analysis of Low-Cost Single-Frequency GPS Receivers in Hydrographic Surveying

Science.gov (United States)

Elsobeiey, M.

2017-10-01

The International Hydrographic Organization (IHO) has issued standards that provide the minimum requirements for different types of hydrographic surveys execution to collect data to be used to compile navigational charts. Such standards are usually updated from time to time to reflect new survey techniques and practices and must be achieved to assure both surface navigation safety and marine environment protection. Hydrographic surveys can be classified to four orders namely, special order, order 1a, order 1b, and order 2. The order of hydrographic surveys to use should be determined in accordance with the importance to the safety of navigation in the surveyed area. Typically, geodetic-grade dual-frequency GPS receivers are utilized for position determination during data collection in hydrographic surveys. However, with the evolution of high-sensitivity low-cost single-frequency receivers, it is very important to evaluate the performance of such receivers. This paper investigates the performance of low-cost single-frequency GPS receivers in hydrographic surveying applications. The main objective is to examine whether low-cost single-frequency receivers fulfil the IHO standards for hydrographic surveys. It is shown that the low-cost single-frequency receivers meet the IHO horizontal accuracy for all hydrographic surveys orders at any depth. However, the single-frequency receivers meet only order 2 requirements for vertical accuracy at depth more than or equal 100 m.

Validation of Questionnaire-Assessed Physical Activity in Comparison With Objective Measures Using Accelerometers and Physical Performance Measures Among Community-Dwelling Adults Aged ≥85 Years in Tokyo, Japan.

Science.gov (United States)

Oguma, Yuko; Osawa, Yusuke; Takayama, Michiyo; Abe, Yukiko; Tanaka, Shigeho; Lee, I-Min; Arai, Yasumichi

2017-04-01

To date, there is no physical activity (PA) questionnaire with convergent and construct validity for the oldest-old. The aim of the current study was to investigate the validity of questionnaire-assessed PA in comparison with objective measures determined by uniaxial and triaxial accelerometers and physical performance measures in the oldest-old. Participants were 155 elderly (mean age 90 years) who were examined at the university and agreed to wear an accelerometer for 7 days in the 3-year-follow-up survey of the Tokyo Oldest-Old Survey of Total Health. Fifty-nine participants wore a uniaxial and triaxial accelerometer simultaneously. Self-rated walking, exercise, and household PA were measured using a modified Zutphen PA Questionnaire (PAQ). Several physical performance tests were done, and the associations among PAQ, accelerometer-assessed PA, and physical performances were compared by Spearman's correlation coefficients. Significant, low to moderate correlations between PA measures were seen on questionnaire and accelerometer assessments (ρ = 0.19 to 0.34). Questionnaireassessed PA measure were correlated with a range of lower extremity performance (ρ = 0.21 to 0.29). This PAQ demonstrated convergent and construct validity. Our findings suggest that the PAQ can reasonably be used in this oldest-old population to rank their PA level.

Development and Evaluation of a Novel Survey Tool Assessing Inpatient Consult Service Performance.

Science.gov (United States)

Miloslavsky, Eli M; Chang, Yuchiao

2017-12-01

Subspecialty consultation in inpatient medicine is increasing, and enhancing performance of consultation services may have a broad-reaching impact. Multisource feedback is an important tool in assessing competence and improving performance. A mechanism for primary team resident feedback on performance of consult services has not been described. We developed and evaluated an instrument designed to assess internal medicine (IM) subspecialty inpatient consult service performance. We hypothesized that the instrument would be feasible to administer and provide important information to fellowship directors. The instrument was administered in 2015 and 2016 at a single academic center. All IM residents were invited to evaluate 10 IM subspecialty consult services on 4 items and an overall satisfaction rating. The instrument allowed for free-text feedback to fellows. Program directors completed another survey assessing the impact of the consult service evaluation. A total of 113 residents responded (47 in 2015 and 66 in 2016, for a combined response rate of 35%). Each of the 4 items measured (communication, professionalism, teaching, and pushback) correlated significantly with the overall satisfaction rating in univariate and multivariate analyses. There were no differences in ratings across postgraduate year or year of administration. There was considerable variation in ratings among the services evaluated. The 7 program directors who provided feedback found the survey useful and made programmatic changes following evaluation implementation. A primary team resident evaluation of inpatient medicine subspecialty consult services is feasible, provides valuable information, and is associated with changes in consult service structure and curricula.

Measuring the performance of electronic health records: a case study in residential aged care in Australia.

Science.gov (United States)

Yu, Ping; Qian, Siyu; Yu, Hui; Lei, Jianbo

2013-01-01

Measuring the performance of electronic health records (EHR) is an important, yet un-resolved challenge. Various measurements have addressed different aspects of EHR success, yet a holistic, comprehensive measurement tool needs to be developed to capture the potential EHR success variables completely. A self-administered questionnaire survey instrument was developed based on the theoretical framework of the DeLone and McLean Information Systems Success Model. It measures nigh variables of EHR success: system quality, information quality, service quality, training, self efficacy, intention to use, use, user satisfaction and net benefits. The instrument was used to measure the performance of aged care EHR systems in three aged care organizations. The results suggest that the instrument was reliable.

TT detector description and implementation of the survey measurements

CERN Document Server

Salzmann, C

2008-01-01

The TT geometry in the software has been updated to comply with the latest technical drawings. The main difference is in the description of the beam pipe insulation, where the amount of material has increased from $7.5\\%$ to $15.4\\%$ of $X_0$. Mother volumes are added to decrease the CPU consumption and finally several scans are made to compare the material budget between the DC06 geometry and the new 2008 geometry. In addition, the survey measurements of the TT detector have been analysed. These measurements can be subdivided into surveys of the detector box, photogrammetry of the balconies and metrology of the half-modules. The offsets with the nominal geometry are implemented in the alignment condition database.

COMPANY PERFORMANCE MEASUREMENT AND REPORTING METHODS

Directory of Open Access Journals (Sweden)

Nicu Ioana Elena

2012-12-01

Full Text Available One of the priorities of economic research has been and remains the re-evaluation of the notion of performance and especially exploring and finding some indicators that would reflect as accurately as possible the subtleties of the economic entity. The main purpose of this paper is to highlight the main company performance measurement and reporting methods. Performance is a concept that raises many question marks concerning the most accurate or the best method of reporting the performance at the company level. The research methodology has aimed at studying the Romanian and foreign specialized literature dealing with the analyzed field, studying magazines specialized on company performance measurement. If the financial performance measurement indicators are considered to offer an accurate image of the situation of the company, the modern approach through non-financial indicators offers a new perspective upon performance measurement, which is based on simplicity. In conclusion, after the theoretical study, I have noticed that the methods of performance measurement, reporting and interpretation are various, the opinions regarding the best performance measurement methods are contradictive and the companies prefer resorting to financial indicators that still play a more important role in the consolidation of the company performance measurement than the non-financial indicators do.

A study on human performance enhancement plan in maintenance field by survey on actual condition of human performance tools - 15035

International Nuclear Information System (INIS)

Park, J.; Jeong, H.; Kim, Y.

2015-01-01

Human errors in nuclear power plant are one of the important factors that may cause reactor trip. Most operating companies of nuclear power plants manage human factor systematically through tools like HPES (Human Performance Enhancement), PSR (Periodic Safety Review), OE (Operating Experience), human performance tools, safety culture assessment and CAP (Corrective Action Program). But human factors are managed passively in maintenance field, because maintenance works are carrying out by partner companies. KHNP also contracts the maintenance work to the partner companies, and advise them to use human performance tools. But the actual condition on partner companies has not been surveyed. This paper suggests some plans that can improve human performance by analyzing the opinion of partner company employees about the causes and solutions of human errors, by analyzing utilization of human performance tools and by comparing the results of the partner companies survey with the results of the operating company survey. The survey is conducted to 3 partner companies by similar contents and categories in order to compare partner company with operating company, and the main analysis fields are the following: -1) Level of understanding and utilization of the human performance tools, -2) Difficulties of applying the human performance tools, -3) Level of employee's training (or education) in the use of the human performance tools, and -4) Root causes of human errors and countermeasures. (authors)

Development of a Behavioral Performance Measure

Directory of Open Access Journals (Sweden)

Marcelo Cabus Klotzle

2012-09-01

Full Text Available Since the fifties, several measures have been developed in order to measure the performance of investments or choices involving uncertain outcomes. Much of these measures are based on Expected Utility Theory, but since the nineties a number of measures have been proposed based on Non-Expected Utility Theory. Among the Theories of Non-Expected Utility highlights Prospect Theory, which is the foundation of Behavioral Finance. Based on this theory this study proposes a new performance measure in which are embedded loss aversion along with the likelihood of distortions in the choice of alternatives. A hypothetical example is presented in which various performance measures, including the new measure are compared. The results showed that the ordering of the assets varied depending on the performance measure adopted. According to what was expected, the new performance measure clearly has captured the distortion of probabilities and loss aversion of the decision maker, ie, those assets with the greatest negative deviations from the target were those who had the worst performance.

Creating a Screening Measure of Health Literacy for the Health Information National Trends Survey.

Science.gov (United States)

Champlin, Sara; Mackert, Michael

2016-03-01

Create a screening measure of health literacy for use with the Health Information National Trends Survey (HINTS). Participants completed a paper-based survey. Items from the survey were used to construct a health literacy screening measure. A population-based survey conducted in geographic areas of high and low minority frequency and in Central Appalachia. Two thousand nine hundred four English-speaking participants were included in this study: 66% white, 93% completed high school, mean age = 52.53 years (SD = 16.24). A health literacy screening measure was created using four items included in the HINTS survey. Scores could range from 0 (no questions affirmative/correct) to 4 (all questions answered affirmatively/correctly). Multiple regression analysis was used to determine whether demographic variables known to predict health literacy were indeed associated with the constructed health literacy screening measure. The weighted average health literacy score was 2.63 (SD = 1.00). Those who were nonwhite (p = .0005), were older (p literacy screening measure scores. This study highlights the need to assess health literacy in national surveys, but also serves as evidence that screening measures can be created within existing datasets to give researchers the ability to consider the impact of health literacy. © The Author(s) 2016.

Performance measurement for information systems: Industry perspectives

Science.gov (United States)

Bishop, Peter C.; Yoes, Cissy; Hamilton, Kay

1992-01-01

Performance measurement has become a focal topic for information systems (IS) organizations. Historically, IS performance measures have dealt with the efficiency of the data processing function. Today, the function of most IS organizations goes beyond simple data processing. To understand how IS organizations have developed meaningful performance measures that reflect their objectives and activities, industry perspectives on IS performance measurement was studied. The objectives of the study were to understand the state of the practice in IS performance techniques for IS performance measurement; to gather approaches and measures of actual performance measures used in industry; and to report patterns, trends, and lessons learned about performance measurement to NASA/JSC. Examples of how some of the most forward looking companies are shaping their IS processes through measurement is provided. Thoughts on the presence of a life-cycle to performance measures development and a suggested taxonomy for performance measurements are included in the appendices.

Environmental Uncertainty, Performance Measure Variety and Perceived Performance in Icelandic Companies

DEFF Research Database (Denmark)

Rikhardsson, Pall; Sigurjonsson, Throstur Olaf; Arnardottir, Audur Arna

and the perceived performance of the company. The sample was the 300 largest companies in Iceland and the response rate was 27%. Compared to other studies the majority of the respondents use a surprisingly high number of different measures – both financial and non-financial. This made testing of the three......The use of performance measures and performance measurement frameworks has increased significantly in recent years. The type and variety of performance measures in use has been researched in various countries and linked to different variables such as the external environment, performance...... measurement frameworks, and management characteristics. This paper reports the results of a study carried out at year end 2013 of the use of performance measures by Icelandic companies and the links to perceived environmental uncertainty, management satisfaction with the performance measurement system...

The adequacy of measures of gender roles attitudes: a review of current measures in omnibus surveys.

Science.gov (United States)

Walter, Jessica Gabriele

2018-01-01

The measures of attitudes toward gender roles included in many representative international and national omnibus surveys were developed mostly in the 1970s and 1980s with a focus on the male breadwinner model. This article deals with the issue of whether the measures provided in these omnibus surveys need to be adjusted to specific social changes. A review of these measures has found that adjustments have occurred in a limited way that focused on the role of women and disregarded the role of men. Furthermore, most of these measures only examined the traditional roles of men and women. More egalitarian role models have not been considered sufficiently. In addition, most items that have been measured are phrased in a general form and, for example, do not specify parents' employment or the ages of children. A specification of these aspects of measurement would help to clarify the conceptual meaning of the results and increase the possibility of more accurately analyzing gender role attitudes over time.

Performance measurement of employee using an integrated 360° feedback system and AHP method: A case study of municipality

Directory of Open Access Journals (Sweden)

Younos Vakil Alroaia

2012-08-01

Full Text Available Performance measurement plays an essential role on accelerating the efficiency of any organization. There are literally different methods for measuring the relative performance of a particular unit and many of them are involved considering various criteria. In this paper, we propose 360° feedback system for performance measurement of all employees who work for municipality of the city of Tabas located in east part of Iran. The proposed model of this paper also uses hierarchical method to cluster different attributes based on various characteristics and implements analytical hierarchy process to find the relative importance of all items. The survey uses five personal characteristics including cognitive, technical, personal and human skills and for each major item, the proposed model considers various sub-criteria. The results indicate that technical and cognitive skills are the most important personal characteristics followed by human and personal characteristics. The results of this survey show that responsibility and quality of work are the most important employee characteristics.

Transit performance measures in California.

Science.gov (United States)

2016-04-01

This research is the result of a California Department of Transportation (Caltrans) request to assess the most commonly : available transit performance measures in California. Caltrans wanted to understand performance measures and data used by : Metr...

Performance Measurement in Global Product Development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2013-01-01

there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

Measuring fertility through mobile‒phone based household surveys: Methods, data quality, and lessons learned from PMA2020 surveys

OpenAIRE

Yoonjoung Choi; Qingfeng Li; Blake Zachary

2018-01-01

Background: PMA2020 is a survey platform with resident enumerators using mobile phones. Instead of collecting full birth history, total fertility rates (TFR) have been measured with a limited number of questions on recent births. Employing new approaches provides opportunities to test and advance survey methods. Objective: This study aims to assess the quality of fertility data in PMA2020 surveys, focusing on bias introduced from the questionnaire and completeness and distribution of birth...

High Job Performance Through Co-Developing Performance Measures With Employees

NARCIS (Netherlands)

Groen, Bianca A.C.; Wilderom, Celeste P.M.; Wouters, Marc

2017-01-01

According to various studies, employee participation in the development of performance measures can increase job performance. This study focuses on how this job performance elevation occurs. We hypothesize that when employees have participated in the development of performance measures, they

Using the Malcolm Baldrige "are we making progress" survey for organizational self-assessment and performance improvement.

Science.gov (United States)

Shields, Judith A; Jennings, Jerry L

2013-01-01

A national healthcare company applied the Malcolm Baldrige Criteria for Performance Excellence and its "Are We Making Progress?" survey as an annual organizational self-assessment to identify areas for improvement. For 6 years, Liberty Healthcare Corporation reviewed the survey results on an annual basis to analyze positive and negative trends, monitor company progress toward targeted goals and develop new initiatives to address emerging areas for improvement. As such, the survey provided a simple and inexpensive methodology to gain useful information from employees at all levels and from multiple service sites and business sectors. In particular, it provided a valuable framework for assessing and improving the employees' commitment to the company's mission and values, high standards and ethics, quality of work, and customer satisfaction. The methodology also helped the company to incorporate the philosophy and principles of continuous quality improvement in a unified fashion. Corporate and local leadership used the same measure to evaluate the performance of individual programs relative to each other, to the company as a whole, and to the "best practices" standard of highly successful companies that received the Malcolm Baldrige National Quality Award. © 2012 National Association for Healthcare Quality.

Enterprise performance measurement systems

Directory of Open Access Journals (Sweden)

Milija Bogavac

2014-10-01

Full Text Available Performance measurement systems are an extremely important part of the control and management actions, because in this way a company can determine its business potential, its market power, potential and current level of business efficiency. The significance of measurement consists in influencing the relationship between the results of reproduction (total volume of production, value of production, total revenue and profit and investments to achieve these results (factors of production spending and hiring capital in order to achieve the highest possible quality of the economy. (The relationship between the results of reproduction and investment to achieve them quantitatively determines economic success as the quality of the economy. Measuring performance allows the identification of the economic resources the company has, so looking at the key factors that affect its performance can help to determine the appropriate course of action.

Measuring Nonresponse Bias in a Cross-Country Enterprise Survey

Directory of Open Access Journals (Sweden)

Katarzyna Bańkowska

2015-04-01

Full Text Available Nonresponse is a common issue affecting the vast majority of surveys. Efforts to convince those unwilling to participate in a survey might not necessary result in a better picture of the target population and can lead to higher, not lower, nonresponse bias.We investigate the impact of non-response in the European Commission & European Central Bank Survey on the Access to Finance of Enterprises (SAFE, which collects evidence on the financing conditions faced by European SMEs compared with those of large firms. This survey, conducted by telephone bi-annually since 2009 by the ECB and the European Commission, provides a valuable means to search for this kind of bias, given the high heterogeneity of response propensities across countries.The study relies on so-called “Representativity Indicators” developed within the Representativity Indicators of Survey Quality (RISQ project, which measure the distance to a fully representative response. On this basis, we examine the quality of the SAFE Survey at different stages of the fieldwork as well as across different survey waves and countries. The RISQ methodology relies on rich sampling frame information, which is however partly limited in the case of the SAFE. We also assess the representativeness of the SAFE particular subsample created by linking the survey responses with the companies’ financial information from a business register; this sub-sampling is another potential source of bias which we also attempt to quantify. Finally, we suggest possible ways how to improve monitoring of the possible nonresponse bias in the future rounds of the survey.

Bias in patient satisfaction surveys: a threat to measuring healthcare quality.

Science.gov (United States)

Dunsch, Felipe; Evans, David K; Macis, Mario; Wang, Qiao

2018-01-01

Patient satisfaction surveys are an increasingly common element of efforts to evaluate the quality of healthcare. Many patient satisfaction surveys in low/middle-income countries frame statements positively and invite patients to agree or disagree, so that positive responses may reflect either true satisfaction or bias induced by the positive framing. In an experiment with more than 2200 patients in Nigeria, we distinguish between actual satisfaction and survey biases. Patients randomly assigned to receive negatively framed statements expressed significantly lower levels of satisfaction (87%) than patients receiving the standard positively framed statements (95%-pquality of health services. Providers and policymakers wishing to gauge the quality of care will need to avoid framing that induces bias and to complement patient satisfaction measures with more objective measures of quality.

An empirical study to measure the impact of e-business on organizational performance with an emphasis on integrated production information

Directory of Open Access Journals (Sweden)

Hadi Meftahi

2012-08-01

Full Text Available During the past few decades, there have been different studies on e-business but there are limited numbers of works accomplished on measuring the impact of e-business on supply chain. Although e-business may not directly influence on organizational performance, it can have significant indirect impact on unifying customers and suppliers, which yields to a better performance of organizations. In this study, we perform an empirical study to measure the indirect impact of e-business on organizational performance. The proposed study of this paper designs a questionnaire and distributes it among 40 professional experts in various industries in province of Ilam, Iran. The survey examines four hypothesis for a possible correlation between e-business and integrated suppliers, e-business and customers, integrated customers and suppliers with organizational performance. The results of this survey confirm a positive relationship between all these components either directly or indirectly.

Borderline personality symptoms and work performance: a population-based survey.

Science.gov (United States)

Juurlink, Trees T; Ten Have, Margreet; Lamers, Femke; van Marle, Hein J F; Anema, Johannes R; de Graaf, Ron; Beekman, Aartjan T F

2018-06-19

This study aims to elucidate the interplay between borderline personality symptoms and working conditions as a pathway for impaired work performance among workers in the general population. Cross-sectional data from the Netherlands Mental Health Survey and Incidence Study-2 (NEMESIS-2) were used, including 3672 workers. Borderline personality symptoms were measured with the International Personality Disorder Examination (IPDE) questionnaire. Working conditions (decision latitude, psychological job demands, job security and co-worker support) were assessed with the Job Content Questionnaire (JCQ). Impaired work performance was assessed as total work loss days per month, defined as the sum of days of three types of impaired work performance (inability to work, cut-down to work, and diminished quality at work). These were assessed with the WHO Disability Assessment Schedule (WHO-DAS). Common mental disorders (CMD) were assessed with the Composite International Diagnostic Interview (CIDI). Number of borderline personality symptoms was consistently associated with impaired work performance, even after controlling for type or number of adverse working conditions and co-occurrence of CMD. Borderline personality symptoms were associated with low decision latitude, job insecurity and low co-worker support. The relationship between borderline personality symptoms and work performance diminished slightly after controlling for type or number of working conditions. The current study shows that having borderline personality symptoms is a unique determinant of work performance. This association seems partially explained through the impact of borderline personality symptoms on working conditions. Future studies are warranted to study causality and should aim at diminishing borderline personality symptoms and coping with working conditions.

Weak lensing Study in VOICE Survey I: Shear Measurement

Science.gov (United States)

Fu, Liping; Liu, Dezi; Radovich, Mario; Liu, Xiangkun; Pan, Chuzhong; Fan, Zuhui; Covone, Giovanni; Vaccari, Mattia; Amaro, Valeria; Brescia, Massimo; Capaccioli, Massimo; De Cicco, Demetra; Grado, Aniello; Limatola, Luca; Miller, Lance; Napolitano, Nicola R.; Paolillo, Maurizio; Pignata, Giuliano

2018-06-01

The VST Optical Imaging of the CDFS and ES1 Fields (VOICE) Survey is a Guaranteed Time program carried out with the ESO/VST telescope to provide deep optical imaging over two 4 deg2 patches of the sky centred on the CDFS and ES1 pointings. We present the cosmic shear measurement over the 4 deg2 covering the CDFS region in the r-band using LensFit. Each of the four tiles of 1 deg2 has more than one hundred exposures, of which more than 50 exposures passed a series of image quality selection criteria for weak lensing study. The 5σ limiting magnitude in r- band is 26.1 for point sources, which is ≳1 mag deeper than other weak lensing survey in the literature (e.g. the Kilo Degree Survey, KiDS, at VST). The photometric redshifts are estimated using the VOICE u, g, r, i together with near-infrared VIDEO data Y, J, H, Ks. The mean redshift of the shear catalogue is 0.87, considering the shear weight. The effective galaxy number density is 16.35 gal/arcmin2, which is nearly twice the one of KiDS. The performance of LensFit on such a deep dataset was calibrated using VOICE-like mock image simulations. Furthermore, we have analyzed the reliability of the shear catalogue by calculating the star-galaxy cross-correlations, the tomographic shear correlations of two redshift bins and the contaminations of the blended galaxies. As a further sanity check, we have constrained cosmological parameters by exploring the parameter space with Population Monte Carlo sampling. For a flat ΛCDM model we have obtained Σ _8 = σ _8(Ω _m/0.3)^{0.5} = 0.68^{+0.11}_{-0.15}.

Alcohol consumption trends in Australia: Comparing surveys and sales-based measures.

Science.gov (United States)

Livingston, Michael; Callinan, Sarah; Raninen, Jonas; Pennay, Amy; Dietze, Paul M

2018-04-01

Survey data remain a crucial means for monitoring alcohol consumption, but there has been limited work done to ensure that surveys adequately capture changes in per-capita consumption in Australia. In this study, we explore how trends in consumption from two major Australian surveys compare with an official measure of per-capita consumption between 2001 and 2014 and examine age-specific trends in drinking. Data were from five waves of the cross-sectional National Health Survey (total n = 113 279) and 12 waves of the longitudinal Household Income and Labour Dynamics in Australia Study (average n = 12 347). Overall and age-specific estimates of annual alcohol consumption were derived and compared with official per-capita consumption and previous analyses of the National Drug Strategy Household Survey. In terms of overall consumption, both surveys broadly reflected trends in per-capita consumption, especially the decline that has been observed since 2007/2008. Age-specific trends were broadly similar, with the recent decline in consumption clearly concentrated among teenagers and young adults. The main Australian monitoring surveys remain useful monitoring tools for alcohol consumption in Australia. There is consistent evidence that the recent declines in Australian per-capita consumption have been driven by sharp falls in drinking among young people, a trend that requires further study. [Livingston M, Callinan S, Raninen J, Pennay A, Dietze PM. Alcohol consumption trends in Australia: Comparing surveys and sales-based measures. Drug Alcohol Rev 2017;00:000-000]. © 2017 Australasian Professional Society on Alcohol and other Drugs.

How to do (or not to do)… Measuring health worker motivation in surveys in low- and middle-income countries.

Science.gov (United States)

Borghi, J; Lohmann, J; Dale, E; Meheus, F; Goudge, J; Oboirien, K; Kuwawenaruwa, A

2018-03-01

A health system's ability to deliver quality health care depends on the availability of motivated health workers, which are insufficient in many low income settings. Increasing policy and researcher attention is directed towards understanding what drives health worker motivation and how different policy interventions affect motivation, as motivation is key to performance and quality of care outcomes. As a result, there is growing interest among researchers in measuring motivation within health worker surveys. However, there is currently limited guidance on how to conceptualize and approach measurement and how to validate or analyse motivation data collected from health worker surveys, resulting in inconsistent and sometimes poor quality measures. This paper begins by discussing how motivation can be conceptualized, then sets out the steps in developing questions to measure motivation within health worker surveys and in ensuring data quality through validity and reliability tests. The paper also discusses analysis of the resulting motivation measure/s. This paper aims to promote high quality research that will generate policy relevant and useful evidence. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Reduced-Item Food Audits Based on the Nutrition Environment Measures Surveys.

Science.gov (United States)

Partington, Susan N; Menzies, Tim J; Colburn, Trina A; Saelens, Brian E; Glanz, Karen

2015-10-01

The community food environment may contribute to obesity by influencing food choice. Store and restaurant audits are increasingly common methods for assessing food environments, but are time consuming and costly. A valid, reliable brief measurement tool is needed. The purpose of this study was to develop and validate reduced-item food environment audit tools for stores and restaurants. Nutrition Environment Measures Surveys for stores (NEMS-S) and restaurants (NEMS-R) were completed in 820 stores and 1,795 restaurants in West Virginia, San Diego, and Seattle. Data mining techniques (correlation-based feature selection and linear regression) were used to identify survey items highly correlated to total survey scores and produce reduced-item audit tools that were subsequently validated against full NEMS surveys. Regression coefficients were used as weights that were applied to reduced-item tool items to generate comparable scores to full NEMS surveys. Data were collected and analyzed in 2008-2013. The reduced-item tools included eight items for grocery, ten for convenience, seven for variety, and five for other stores; and 16 items for sit-down, 14 for fast casual, 19 for fast food, and 13 for specialty restaurants-10% of the full NEMS-S and 25% of the full NEMS-R. There were no significant differences in median scores for varying types of retail food outlets when compared to the full survey scores. Median in-store audit time was reduced 25%-50%. Reduced-item audit tools can reduce the burden and complexity of large-scale or repeated assessments of the retail food environment without compromising measurement quality. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Employee participation in developing performance measures and job performance: on the role of measurement properties and incentives

NARCIS (Netherlands)

Groen, B.; Wouters, M.; Wilderom, C.

2013-01-01

Involving employees in the development of performance measures often results in better employee job performance. Yet not all prior studies find such a direct effect. This study explains these inconsistent findings. It focuses on the measurement properties of performance measures and using them for

Errors in practical measurement in surveying, engineering, and technology

International Nuclear Information System (INIS)

Barry, B.A.; Morris, M.D.

1991-01-01

This book discusses statistical measurement, error theory, and statistical error analysis. The topics of the book include an introduction to measurement, measurement errors, the reliability of measurements, probability theory of errors, measures of reliability, reliability of repeated measurements, propagation of errors in computing, errors and weights, practical application of the theory of errors in measurement, two-dimensional errors and includes a bibliography. Appendices are included which address significant figures in measurement, basic concepts of probability and the normal probability curve, writing a sample specification for a procedure, classification, standards of accuracy, and general specifications of geodetic control surveys, the geoid, the frequency distribution curve and the computer and calculator solution of problems

Productivity and Performance Measurement

DEFF Research Database (Denmark)

Hald, Kim Sundtoft; Spring, Martin

This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

Performance measurement in healthcare: part II--state of the science findings by stage of the performance measurement process.

Science.gov (United States)

Adair, Carol E; Simpson, Elizabeth; Casebeer, Ann L; Birdsell, Judith M; Hayden, Katharine A; Lewis, Steven

2006-07-01

This paper summarizes findings of a comprehensive, systematic review of the peer-reviewed and grey literature on performance measurement according to each stage of the performance measurement process--conceptualization, selection and development, data collection, and reporting and use. It also outlines implications for practice. Six hundred sixty-four articles about organizational performance measurement from the health and business literature were reviewed after systematic searches of the literature, multi-rater relevancy ratings, citation checks and expert author nominations. Key themes were extracted and summarized from the most highly rated papers for each performance measurement stage. Despite a virtually universal consensus on the potential benefits of performance measurement, little evidence currently exists to guide practice in healthcare. Issues in conceptualizing systems include strategic alignment and scope. There are debates on the criteria for selecting measures and on the types and quality of measures. Implementation of data collection and analysis systems is complex and costly, and challenges persist in reporting results, preventing unintended effects and putting findings for improvement into action. There is a need for further development and refinement of performance measures and measurement systems, with a particular focus on strategies to ensure that performance measurement leads to healthcare improvement.

Readiness to adopt a performance measurement system for substance abuse treatment: Findings from the Service Quality Measures initiative

Directory of Open Access Journals (Sweden)

B Myers

2017-02-01

Full Text Available Background. A performance measurement system – the Service Quality Measures (SQM initiative – has been developed to monitor the quality of South Africa (SA’s substance abuse treatment services. Identifying factors associated with readiness to adopt this system may inform strategies to facilitate its robust implementation. Objective. To examine factors associated with readiness to adopt a performance measurement system among SA substance abuse treatment providers. Methods. We surveyed 81 treatment providers from 13 treatment sites in the Western Cape, SA. The survey examined awareness, resources, organisational climate, leadership support and readiness to adopt the SQM system. Regression analysis was used to identify factors associated with readiness to adopt this system. Results. Readiness to adopt the SQM initiative was high (M=5.64, standard deviation 1.63. In bivariate analyses, caseload size (F=3.73 (degrees of freedom (df=3.70, p=0.015, awareness (r=0.78, p<0.0001, leadership support (r=0.70, p<0.0001, resources (r=0.65, p<0.0001, openness to change (r=0.372, p=0.001, and external pressure to change were associated with readiness to adopt the SQM. In multivariate analyses, only awareness of the SQM initiative (B=0.34, standard error (SE 0.08, t=4.4, p<0.0001 and leadership support (B=0.45, SE 0.11, t=4.0, p<0.0001 were significantly associated with readiness to adopt this system. Conclusion. While treatment providers report high levels of readiness to adopt the SQM system, findings show that the likelihood of adoption can be further increased through improved provider awareness and enhanced leadership support for this health innovation.

Readiness to adopt a performance measurement system for substance abuse treatment: Findings from the Service Quality Measures initiative.

Science.gov (United States)

Myers, B; Petersen Williams, P; Johnson, K; Govender, R; Manderscheid, R; Koch, J R

2017-01-30

A performance measurement system - the Service Quality Measures (SQM) initiative - has been developed to monitor the quality of South Africa (SA)'s substance abuse treatment services. Identifying factors associated with readiness to adopt this system may inform strategies to facilitate its robust implementation. To examine factors associated with readiness to adopt a performance measurement system among SA substance abuse treatment providers. We surveyed 81 treatment providers from 13 treatment sites in the Western Cape, SA. The survey examined awareness, resources, organisational climate, leadership support and readiness to adopt the SQM system. Regression analysis was used to identify factors associated with readiness to adopt this system. Readiness to adopt the SQM initiative was high (M=5.64, standard deviation 1.63). In bivariate analyses, caseload size (F=3.73 (degrees of freedom (df)=3.70), p=0.015), awareness (r=0.78, p<0.0001), leadership support (r=0.70, p<0.0001), resources (r=0.65, p<0.0001), openness to change (r=0.372, p=0.001), and external pressure to change were associated with readiness to adopt the SQM. In multivariate analyses, only awareness of the SQM initiative (B=0.34, standard error (SE) 0.08, t=4.4, p<0.0001) and leadership support (B=0.45, SE 0.11, t=4.0, p<0.0001) were significantly associated with readiness to adopt this system. While treatment providers report high levels of readiness to adopt the SQM system, findings show that the likelihood of adoption can be further increased through improved provider awareness and enhanced leadership support for this health innovation.

Performance in Measurement of Serum Cystatin C by Laboratories Participating in the College of American Pathologists 2014 CYS Survey.

Science.gov (United States)

Eckfeldt, John H; Karger, Amy B; Miller, W Greg; Rynders, Gregory P; Inker, Lesley A

2015-07-01

Cystatin C is becoming an increasingly popular biomarker for estimating glomerular filtration rate, and accurate measurements of cystatin C concentrations are necessary for accurate estimates of glomerular filtration rate. To assess the accuracy of cystatin C concentration measurements in laboratories participating in the College of American Pathologists CYS Survey. Two fresh frozen serum pools, the first from apparently healthy donors and the second from patients with chronic kidney disease, were prepared and distributed to laboratories participating in the CYS Survey along with the 2 usual processed human plasma samples. Target values were established for each pool by using 2 immunoassays and ERM DA471/IFCC international reference material. For the normal fresh frozen pool (ERM-DA471/IFCC-traceable target of 0.960 mg/L), the all-method mean (SD, % coefficient of variation [CV]) reported by all of the 123 reporting laboratories was 0.894 mg/L (0.128 mg/L, 14.3%). For the chronic kidney disease pool (ERM-DA471/IFCC-traceable target of 2.37 mg/L), the all-method mean (SD, %CV) was 2.258 mg/L (0.288 mg/L, 12.8%). There were substantial method-specific biases (mean milligram per liter reported for the normal pool was 0.780 for Siemens, 0.870 for Gentian, 0.967 for Roche, 1.061 for Diazyme, and 0.970 for other/not specified reagents; and mean milligram per liter reported for the chronic kidney disease pool was 2.052 for Siemens, 2.312 for Gentian, 2.247 for Roche, 2.909 for Diazyme, and 2.413 for other/not specified reagents). Manufacturers need to improve the accuracy of cystatin C measurement procedures if cystatin C is to achieve its full potential as a biomarker for estimating glomerular filtration rate.

The Impact of Knowledge Management Practices on NPP Organizational Performance - Results of a Global Survey

International Nuclear Information System (INIS)

2013-06-01

The IAEA has been asked by Member States in the 2012 General Conference Resolutions to ''further increase the level of awareness of efforts in managing nuclear knowledge'' and to continue ''to further develop and disseminate guidance and methodologies for planning, designing, and implementing nuclear knowledge management programs''. The present report summarizes the results of empirical research on the relationship between KM practices in nuclear power plants, their impact on the quality of organizational knowledge processes and the resulting effects on the organizational effectiveness of nuclear power plants. It presents the basic findings of the ''IAEA Global Nuclear Power Plant Survey: Investigating the Link Between Knowledge Management Practices and Organizational Performance'', which was conducted in 2010. This benchmark survey of KM practices in nuclear power plants was developed using a standard research methodology. The survey was made available on a global basis to all nuclear power plant sites. Senior operations managers were asked to complete the survey with input, as required, from their plant management team. Data from individual survey responses were treated as confidential, and only aggregate findings were reported. A total of 124 station ''site organizations'' participated in the survey, representing a response rate of approximately 60%. The findings provide empirical evidence of the importance of KM practices in improving the organizational effectiveness of nuclear power plants. They provide information about the current state of the industry with respect to KM practices, illustrating the direct and tangible benefits of implementing such practices and justifying continued or further efforts to ensure that KM programmes and systems are strategically planned and implemented in operating nuclear power plants. The research provides insights into the mechanisms by which KM practices have an impact on organizational effectiveness and provides a basis for

Measuring the impact of HRM on organizational performance

Directory of Open Access Journals (Sweden)

Anastasia A. Katou

2008-12-01

Full Text Available Normal 0 21 false false false ES ZH-CN X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman","serif"; mso-ansi-language:ES-TRAD; mso-fareast-language:EN-US;} The purpose of this paper is to measure the impact of HRM on organisational performance in the context of Greece. Data were collected from 178 organisations using a questionnaire survey in the Greek manufacturing sector, and analysed using the ‘structural equation modelling’ methodology. The results indicated that the relationship between HRM policies (resourcing and development, compensation and incentives, involvement and job design and organisational performance is partially mediated through HRM outcomes (skills, attitudes, behaviour, and it is influenced by business strategies (cost, quality, innovation. Thus, the contribution of this study for academics and practitioners is that HRM policies associated with business strategies will affect organisational performance through HRM outcomes.

Performance measurement in transport sector analysis

Directory of Open Access Journals (Sweden)

M. Išoraitė

2004-06-01

Full Text Available The article analyses the following issues: 1. Performance measurement in literature. The performance measurement has an important role to play in the efficient and effective management of organizations. Kaplan and Johnson highlighted the failure of the financial measures to reflect changes in the competitive circumstances and strategies of modern organizations. Many authors have focused attention on how organizations can design more appropriate measurement systems. Based on literature, consultancy experience and action research, numerous processes have been developed that organizations can follow in order to design and implement systems. Many frameworks have been proposed that support these processes. The objective of such frameworks is to help organizations define a set of measures that reflect their objectives and assess their performance appropriately. 2. Transport sector performance and its impacts measuring. The purpose of transport measurement is to identify opportunities enhancing transport performance. Successful transport sector management requires a system to analyze its efficiency and effectiveness as well as plan interventions if transport sector performance needs improvement. Transport impacts must be measurable and monitorable so that the person responsible for the project intervention can decide when and how to influence them. Performance indicators provide a means to measure and monitor impacts. These indicators essentially reflect quantitative and qualitative aspects of impacts at given time and places. 3. Transport sector output and input. Transport sector inputs are the resources required to deliver transport sector outputs. Transport sector inputs are typically: human resources, particularly skilled resources (including specialists consulting inputs; technology processes such as equipment and work; and finance, both public and private. 4. Transport sector policy and institutional framework; 5. Cause – effect linkages; 6

Measuring redshift-space distortions using photometric surveys

OpenAIRE

Ross, Ashley; Percival, Will; Crocce, M.; Cabre, A.; Gaztanaga, E.

2011-01-01

We outline how redshift-space distortions (RSD) can be measured from the angular correlation function w({\\theta}), of galaxies selected from photometric surveys. The natural degeneracy between RSD and galaxy bias can be minimized by comparing results from bins with top-hat galaxy selection in redshift, and bins based on the radial position of galaxy pair centres. This comparison can also be used to test the accuracy of the photometric redshifts. The presence of RSD will be clearly detectable ...

75 FR 57263 - New Policy Announcing That Traditional Horizontal Survey Projects Performed With Terrestrial...

Science.gov (United States)

2010-09-20

... Traditional Horizontal Survey Projects Performed With Terrestrial Survey Techniques Will No Longer Be Accepted... for additional information should be directed to Mr. Mark Eckl, Observation and Analysis Division... horizontal surveys requires use of resources that are limited and will be used more appropriately elsewhere...

Development of material measures for performance verifying surface topography measuring instruments

International Nuclear Information System (INIS)

Leach, Richard; Giusca, Claudiu; Rickens, Kai; Riemer, Oltmann; Rubert, Paul

2014-01-01

The development of two irregular-geometry material measures for performance verifying surface topography measuring instruments is described. The material measures are designed to be used to performance verify tactile and optical areal surface topography measuring instruments. The manufacture of the material measures using diamond turning followed by nickel electroforming is described in detail. Measurement results are then obtained using a traceable stylus instrument and a commercial coherence scanning interferometer, and the results are shown to agree to within the measurement uncertainties. The material measures are now commercially available as part of a suite of material measures aimed at the calibration and performance verification of areal surface topography measuring instruments

An automated radiological survey method for performing site remediation and decommissioning

International Nuclear Information System (INIS)

Handy, R.G.; Bolch, W.E.; Harder, G.F.; Tolaymat, T.M.

1994-01-01

A portable, computer-based method of performing environmental monitoring and assessment for site remediation and decommissioning has been developed. The integrated system has been developed to provide for survey time reductions and real-time data analysis. The technique utilizes a notebook 486 computer with the necessary hardware and software components that makes it possible to be used in an almost unlimited number of environmental monitoring and assessment scenarios. The results from a pilot, open-quotes hide-and-seekclose quotes gamma survey and an actual alpha decontamination survey were elucidated. It was found that a open-quotes hide-and-seekclose quotes survey could come up with timely and accurate conclusions about the position of the source. The use of the automated system in a Th-232 alpha survey resulted in a reduction in the standard time necessary to do a radiological survey. In addition, the ability to analyze the data on-site allowed for identification and location of areas which needed further decontamination. Finally, a discussion on possible future improvements and field conclusions was made

Measures of small business success/performance: Importance, reliability and usability

Directory of Open Access Journals (Sweden)

Leković Božidar

2015-01-01

Full Text Available The main objective of this paper is to assess the reliability of selected measures of success/performance of small enterprises taking into account all the advantages and disadvantages of objective (traditional, financial and subjective (personal perception indicators. The realization of the basic objective will enable removal of doubt in different categories of success / performance of small businesses, which would be a secondary objective of the paper. The research methodology involves the use parametric procedures due to the characteristics of the selected variables and the number of observations in the sample. Univariate ANOVA and Pearson's coefficient correlation will be the main methods used. The basis of this study consists of data gathered from e-survey of 260 entrepreneurs/ owners/ managers of small enterprises in administrative sub-region of the Republic of Serbia. The analysis results show the correlation between subjective estimate of success of owners/ entrepreneurs/ managers and objective performance indicators, which can be characterized as complementary, meaning that subjective assessment as well as formally stated performance indicators are realistic. In addition, it is important to emphasize as an important result within the group of objective performance indicators, the differences between two groups, financial and non-financial, performance indicators.

Measurement of Ethnic Background in Cross-national School Surveys

DEFF Research Database (Denmark)

Jensen, Helene Nordahl; Krølner, Rikke; Páll, Gabrilla

2011-01-01

Indicators such as country of birth and language spoken at home have been used as proxy measures for ethnic background, but the validity of these indicators in surveys among school children remains unclear. This study aimed at comparing item response and student-parent agreement on four questions...

[Balanced scorecard for performance measurement of a nursing organization in a Korean hospital].

Science.gov (United States)

Hong, Yoonmi; Hwang, Kyung Ja; Kim, Mi Ja; Park, Chang Gi

2008-02-01

The purpose of this study was to develop a balanced scorecard (BSC) for performance measurement of a Korean hospital nursing organization and to evaluate the validity and reliability of performance measurement indicators. Two hundred fifty-nine nurses in a Korean hospital participated in a survey questionnaire that included 29-item performance evaluation indicators developed by investigators of this study based on the Kaplan and Norton's BSC (1992). Cronbach's alpha was used to test the reliability of the BSC. Exploratory and confirmatory factor analysis with a structure equation model (SEM) was applied to assess the construct validity of the BSC. Cronbach's alpha of 29 items was .948. Factor analysis of the BSC showed 5 principal components (eigen value >1.0) which explained 62.7% of the total variance, and it included a new one, community service. The SEM analysis results showed that 5 components were significant for the hospital BSC tool. High degree of reliability and validity of this BSC suggests that it may be used for performance measurements of a Korean hospital nursing organization. Future studies may consider including a balanced number of nurse managers and staff nurses in the study. Further data analysis on the relationships among factors is recommended.

40 CFR 141.723 - Requirements to respond to significant deficiencies identified in sanitary surveys performed by EPA.

Science.gov (United States)

2010-07-01

... deficiencies identified in sanitary surveys performed by EPA. 141.723 Section 141.723 Protection of Environment... performed by EPA, systems must respond in writing to significant deficiencies identified in sanitary survey... will address significant deficiencies noted in the survey. (d) Systems must correct significant...

Process measures or patient reported experience measures (PREMs) for comparing performance across providers? A study of measures related to access and continuity in Swedish primary care.

Science.gov (United States)

Glenngård, Anna H; Anell, Anders

2018-01-01

Aim To study (a) the covariation between patient reported experience measures (PREMs) and registered process measures of access and continuity when ranking providers in a primary care setting, and (b) whether registered process measures or PREMs provided more or less information about potential linkages between levels of access and continuity and explaining variables. Access and continuity are important objectives in primary care. They can be measured through registered process measures or PREMs. These measures do not necessarily converge in terms of outcomes. Patient views are affected by factors not necessarily reflecting quality of services. Results from surveys are often uncertain due to low response rates, particularly in vulnerable groups. The quality of process measures, on the other hand, may be influenced by registration practices and are often more easy to manipulate. With increased transparency and use of quality measures for management and governance purposes, knowledge about the pros and cons of using different measures to assess the performance across providers are important. Four regression models were developed with registered process measures and PREMs of access and continuity as dependent variables. Independent variables were characteristics of providers as well as geographical location and degree of competition facing providers. Data were taken from two large Swedish county councils. Findings Although ranking of providers is sensitive to the measure used, the results suggest that providers performing well with respect to one measure also tended to perform well with respect to the other. As process measures are easier and quicker to collect they may be looked upon as the preferred option. PREMs were better than process measures when exploring factors that contributed to variation in performance across providers in our study; however, if the purpose of comparison is continuous learning and development of services, a combination of PREMs and

Lessons learnt on biases and uncertainties in personal exposure measurement surveys of radiofrequency electromagnetic fields with exposimeters.

Science.gov (United States)

Bolte, John F B

2016-09-01

Personal exposure measurements of radio frequency electromagnetic fields are important for epidemiological studies and developing prediction models. Minimizing biases and uncertainties and handling spatial and temporal variability are important aspects of these measurements. This paper reviews the lessons learnt from testing the different types of exposimeters and from personal exposure measurement surveys performed between 2005 and 2015. Applying them will improve the comparability and ranking of exposure levels for different microenvironments, activities or (groups of) people, such that epidemiological studies are better capable of finding potential weak correlations with health effects. Over 20 papers have been published on how to prevent biases and minimize uncertainties due to: mechanical errors; design of hardware and software filters; anisotropy; and influence of the body. A number of biases can be corrected for by determining multiplicative correction factors. In addition a good protocol on how to wear the exposimeter, a sufficiently small sampling interval and sufficiently long measurement duration will minimize biases. Corrections to biases are possible for: non-detects through detection limit, erroneous manufacturer calibration and temporal drift. Corrections not deemed necessary, because no significant biases have been observed, are: linearity in response and resolution. Corrections difficult to perform after measurements are for: modulation/duty cycle sensitivity; out of band response aka cross talk; temperature and humidity sensitivity. Corrections not possible to perform after measurements are for: multiple signals detection in one band; flatness of response within a frequency band; anisotropy to waves of different elevation angle. An analysis of 20 microenvironmental surveys showed that early studies using exposimeters with logarithmic detectors, overestimated exposure to signals with bursts, such as in uplink signals from mobile phones and Wi

Measuring the mental health care system responsiveness: results of an outpatient survey in Tehran

Directory of Open Access Journals (Sweden)

Setareh eForouzan

2016-01-01

Full Text Available AbstractAs explained by the World Health Organisation (WHO in 2000, the concept of health system responsiveness is one of the core goals of health systems. Since 2000, further efforts have been made to measure health system responsiveness and the factors affecting responsiveness, yet few studies have applied responsiveness concepts to the evaluation of mental health systems. The present study aims to measure responsiveness and its related domains in the mental health care system of Tehran. Utilising the same method used by the WHO for its responsiveness survey, responsiveness for outpatient mental health care was evaluated using a validated Farsi questionnaire. A sample of 500 public mental health service users in Tehran participated and subsequently completed the questionnaire. On average, 47% of participants reported experiencing poor responsiveness. Among responsiveness domains, confidentiality and dignity were the best performing factors while autonomy, access to care and quality of basic amenities were the worst performing. Respondents who reported their social status as low were more likely to experience poor responsiveness overall. Autonomy, quality of basic amenities and clear communication were responsiveness dimensions that performed poorly but were considered to be important by study participants. In summary, the study suggests that measuring responsiveness could provide guidance for further development of mental health care systems to become more patient orientated and provide patients with more respect.

Wide Field Infrared Survey Telescope [WFIRST]: telescope design and simulated performance

Science.gov (United States)

Goullioud, R.; Content, D. A.; Kuan, G. M.; Moore, J. D.; Chang, Z.; Sunada, E. T.; Villalvazo, J.; Hawk, J. P.; Armani, N. V.; Johnson, E. L.; Powell, C. A.

2012-09-01

The Wide Field Infrared Survey Telescope (WFIRST) mission concept was ranked first in new space astrophysics missions by the Astro2010 Decadal Survey, incorporating the Joint Dark Energy Mission payload concept and multiple science white papers. This mission is based on a space telescope at L2 studying exoplanets [via gravitational microlensing], probing dark energy, and surveying the near infrared sky. Since the release of the Astro2010 Decadal Survey, the team has been working with the WFIRST Science Definition Team to refine mission and payload concepts. We present the current interim reference mission point design of the payload, based on the use of a 1.3m unobscured aperture three mirror anastigmat form, with focal imaging and slit-less spectroscopy science channels. We also present the first results of Structural/Thermal/Optical performance modeling of the telescope point design.

The THU-NAOC transient survey: the performance and results from the first year

International Nuclear Information System (INIS)

Zhang Tian-Meng; Zhou Xu; Nie Jun-Dan; Jiang Zhao-Ji; Ma Jun; Wang Ling-Zhi; Zhou Zhi-Min; Zou Hu; Wang Xiao-Feng; Chen Jun-Cheng; Zhou Li; Li Wen-Xiong; Liu Qing; Mo Jun; Zhang Kai-Cheng; Yao Xin-Yu; Zhao Xu-Lin; Huang Fang; Zhang Ju-Jia; Wu Chao

2015-01-01

The Tsinghua University-National Astronomical Observatories, Chinese Academy of Sciences (NAOC) Transient Survey is an automatic survey that conducts a systematic exploration of optical transients. This project utilizes a 60/90 cm Schmidt telescope at the Xinglong Station of NAOC. This survey repeatedly covers ∼ 1000 square degrees of the northern sky with a cadence of 3–4 d. With an exposure of 60 s, the survey reaches a limiting unfiltered magnitude of about 19.5 mag, which enables us to discover supernovae in their relatively young stages. We describe the overall performance of our survey during the first year and present some preliminary results. (research papers)

Probing primordial non-Gaussianity via iSW measurements with SKA continuum surveys

Energy Technology Data Exchange (ETDEWEB)

Raccanelli, Alvise; Doré, Olivier, E-mail: alvise@jhu.edu, E-mail: olivier.dore@caltech.edu [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, California 91109 (United States); Bacon, David J.; Maartens, Roy, E-mail: David.Bacon@port.ac.uk, E-mail: roy.maartens@gmail.com [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth P01 3FX (United Kingdom); and others

2015-01-01

The Planck CMB experiment has delivered the best constraints so far on primordial non-Gaussianity, ruling out early-Universe models of inflation that generate large non-Gaussianity. Although small improvements in the CMB constraints are expected, the next frontier of precision will come from future large-scale surveys of the galaxy distribution. The advantage of such surveys is that they can measure many more modes than the CMB—in particular, forthcoming radio surveys with the Square Kilometre Array will cover huge volumes. Radio continuum surveys deliver the largest volumes, but with the disadvantage of no redshift information. In order to mitigate this, we use two additional observables. First, the integrated Sachs-Wolfe effect—the cross-correlation of the radio number counts with the CMB temperature anisotropies—helps to reduce systematics on the large scales that are sensitive to non-Gaussianity. Second, optical data allows for cross-identification in order to gain some redshift information. We show that, while the single redshift bin case can provide a σ(f{sub NL}) ∼ 20, and is therefore not competitive with current and future constraints on non-Gaussianity, a tomographic analysis could improve the constraints by an order of magnitude, even with only two redshift bins. A huge improvement is provided by the addition of high-redshift sources, so having cross-ID for high-z galaxies and an even higher-z radio tail is key to enabling very precise measurements of f{sub NL}. We use Fisher matrix forecasts to predict the constraining power in the case of no redshift information and the case where cross-ID allows a tomographic analysis, and we show that the constraints do not improve much with 3 or more bins. Our results show that SKA continuum surveys could provide constraints competitive with CMB and forthcoming optical surveys, potentially allowing a measurement of σ(f{sub NL}) ∼ 1 to be made. Moreover, these measurements would act as a useful check

Measuring Firm Performance

DEFF Research Database (Denmark)

Assaf, A. George; Josiassen, Alexander; Gillen, David

2014-01-01

Set in the airport industry, this paper measures firm performance using both desirable and bad outputs (i.e. airport delays). We first estimate a model that does not include the bad outputs and then a model that includes bad outputs. The results show important differences in the efficiency...

Performance Measurement Baseline Change Request

Data.gov (United States)

Social Security Administration — The Performance Measurement Baseline Change Request template is used to document changes to scope, cost, schedule, or operational performance metrics for SSA's Major...

Measuring the performance of business incubators

OpenAIRE

VANDERSTRAETEN, Johanna; MATTHYSSENS, Paul; VAN WITTELOOSTUIJN, Arjen

2012-01-01

This paper focuses on incubator performance measurement. First, we report the findings of an extensive literature review. Both existing individual measures and more comprehensive measurement systems are discussed. This literature review shows that most incubator researchers and practitioners only use one or a few indicators for performance evaluation, and that existing measurement systems do not recognize the importance of short, medium and long-term results, do not always include an incubato...

Measurement uncertainty analysis techniques applied to PV performance measurements

International Nuclear Information System (INIS)

Wells, C.

1992-10-01

The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results

Measurement uncertainty analysis techniques applied to PV performance measurements

Energy Technology Data Exchange (ETDEWEB)

Wells, C.

1992-10-01

The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

Measurement uncertainty analysis techniques applied to PV performance measurements

Energy Technology Data Exchange (ETDEWEB)

Wells, C

1992-10-01

The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment`s final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

The Supernova Legacy Survey: Measurement of Omega_M, Omega_Lambda,and w from the First Year Data Set

Energy Technology Data Exchange (ETDEWEB)

Astier, P.; Guy, J.; Regnault, N.; Pain, R.; Aubourg, E.; Balam,D.; Basa, S.; Carlberg, R.G.; Fabbro, S.; Fouchez, D.; Hook, I.M.; Howell, D.A.; Lafoux, H.; Neill, J.D.; Palanque-Delabrouille, N.; Perrett, K.; Pritchet, C.J.; Rich, J.; Sullivan, M.; Taillet, R.; Aldering, G.; Antilogus, P.; Arsenijevic, V.; Balland, C.; Baumont, S.; Bronder, J.; Courtois, H.; Ellis, R.S.; Filiol, M.; Goncalves, A.C.; Goobar, A.; Guide, D.; Hardin, D.; Lusset, V.; Lidman, C.; McMahon, R.; Mouchet, M.; Mourao, A.; Perlmutter, S.; Ripoche, P.; Tao, C.; Walton, N.

2005-10-14

We present distance measurements to 71 high redshift type Ia supernovae discovered during the first year of the 5-year Supernova Legacy Survey (SNLS). These events were detected and their multi-color light-curves measured using the MegaPrime/MegaCam instrument at the Canada-France-Hawaii Telescope (CFHT), by repeatedly imaging four one-square degree fields in four bands. Follow-up spectroscopy was performed at the VLT, Gemini and Keck telescopes to confirm the nature of the supernovae and to measure their redshift. With this data set, we have built a Hubble diagram extending to z = 1, with all distance measurements involving at least two bands. Systematic uncertainties are evaluated making use of the multiband photometry obtained at CFHT. Cosmological fits to this first year SNLS Hubble diagram give the following results: {Omega}{sub M} = 0.263 {+-} 0.042 (stat) {+-} 0.032 (sys) for a flat {Lambda}CDM model; and w = -1.023 {+-} 0.090 (stat) {+-} 0.054 (sys) for a flat cosmology with constant equation of state w when combined with the constraint from the recent Sloan Digital Sky Survey measurement of baryon acoustic oscillations.

The Supernova Legacy Survey: Measurement of Omega_M, Omega_Lambda, and w from the First Year Data Set

Science.gov (United States)

Astier, P.; Guy, J.; Regnault, N.; Pain, R.; Aubourg, E.; Balam, D.; Basa, S.; Carlberg, R. G.; Fabbro, S.; Fouchez, D.; Hook, I. M.; Howell, D. A.; Lafoux, H.; Neill, J. D.; Palanque-Delabrouille, N.; Perrett, K.; Pritchet, C. J.; Rich, J.; Sullivan, M.; Taillet, R.; Aldering, G.; Antilogus, P.; Arsenijevic, V.; Balland, C.; Baumont, S.; Bronder, J.; Courtois, H.; Ellis, R. S.; Filiol, M.; Goncalves, A. C.; Goobar, A.; Guide, D.; Hardin, D.; Lusset, V.; Lidman, C.; McMahon, R.; Mouchet, M.; Mourao, A.; Perlmutter, S.; Ripoche, P.; Tao, C.; Walton, N.

2005-10-14

We present distance measurements to 71 high redshift type Ia supernovae discovered during the first year of the 5-year Supernova Legacy Survey (SNLS). These events were detected and their multi-color light-curves measured using the MegaPrime/MegaCam instrument at the Canada-France-Hawaii Telescope (CFHT), by repeatedly imaging four one-square degree fields in four bands. Follow-up spectroscopy was performed at the VLT, Gemini and Keck telescopes to confirm the nature of the supernovae and to measure their redshift. With this data set, we have built a Hubble diagram extending to z = 1, with all distance measurements involving at least two bands. Systematic uncertainties are evaluated making use of the multiband photometry obtained at CFHT. Cosmological fits to this first year SNLS Hubble diagram give the following results: {Omega}{sub M} = 0.263 {+-} 0.042 (stat) {+-} 0.032 (sys) for a flat {Lambda}CDM model; and w = -1.023 {+-} 0.090 (stat) {+-} 0.054 (sys) for a flat cosmology with constant equation of state w when combined with the constraint from the recent Sloan Digital Sky Survey measurement of baryon acoustic oscillations.

The service of public services performance measurement

DEFF Research Database (Denmark)

Lystbæk, Christian Tang

2014-01-01

that performance measurement serves as “rituals of verification” which promotes the interests of political masters and their mistresses rather than public service. Another area of concern is the cost of performance measurement. Hood & Peters (2004:278) note that performance measurement is likely to “distract...... measurement suggests a range of contested and contradictory propositions. Its alleged benefits include public assurance, better functioning of supply markets for public services, and direct improvements of public services. But the literature also demonstrates the existence of significant concern about...... the actual impact, the costs and unintended consequences associated with performance measurement. This paper identifies the main rationales and rationalities in the scholarly discourse on public services performance measurement. It concludes with some suggestions on how to deal with the many rationales...

26 CFR 801.2 - Measuring organizational performance.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Measuring organizational performance. 801.2 Section 801.2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INTERNAL... REVENUE SERVICE § 801.2 Measuring organizational performance. The performance measures that comprise the...

Measuring and improving infrastructure performance

National Research Council Canada - National Science Library

Committee on Measuring and Improving Infrastructure Performance, National Research Council

.... Developing a framework for guiding attempts at measuring the performance of infrastructure systems and grappling with the concept of defining good performance are the major themes of this book...

New’ Performance Measures: Determinants of Their Use and Their Impact on Performance

NARCIS (Netherlands)

F.H.M. Verbeeten (Frank)

2005-01-01

textabstractThis study investigates the extent to which Dutch organizations use ‘new’ performance measures to deal with the perceived inadequacies of traditional accounting performance measures. In addition, the determinants of the use of these ‘new’ performance measures are documented; finally, the

Reference values for physical performance measures in the aging working population.

Science.gov (United States)

Cote, Mark P; Kenny, Anne; Dussetschleger, Jeffrey; Farr, Dana; Chaurasia, Ashok; Cherniack, Martin

2014-02-01

The aim of this study was to determine reference physical performance values in older aging workers. Cross-sectional physical performance measures were collected for 736 manufacturing workers to assess effects of work and nonwork factors on age-related changes in musculoskeletal function and health. Participants underwent surveys and physical testing that included bioelectrical impedance analysis, range-of-motion measures, exercise testing, and dynamic assessment. Physical characteristics, such as blood pressure and body fat percentage, were comparable to published values. Dynamic and range-of-motion measurements differed from published normative results. Women had age-related decreases in cervical extension and lateral rotation. Older men had better spinal flexion than expected. Predicted age-related decline in lower-extremity strength and shoulder strength in women was not seen. Men declined in handgrip, lower-extremity strength, and knee extension strength, but not trunk strength, across age groups. There was no appreciable decline in muscle fatigue at the trunk, shoulder, and knee with aging for either gender, except for the youngest age group of women. Normative values may underestimate physical performance in "healthy" older workers, thereby underappreciating declines in less healthy older workers. Work may be preservative of function for a large group of selected individuals. A "healthy worker effect" may be greater for musculoskeletal disease and function than for heart disease and mortality. Clinicians and researchers studying musculoskeletal function in older workers can use a more specific set of reference values.

Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations.

Science.gov (United States)

Bauer, Greta R; Braimoh, Jessica; Scheim, Ayden I; Dharma, Christoffer

2017-01-01

Given that an estimated 0.6% of the U.S. population is transgender (trans) and that large health disparities for this population have been documented, government and research organizations are increasingly expanding measures of sex/gender to be trans inclusive. Options suggested for trans community surveys, such as expansive check-all-that-apply gender identity lists and write-in options that offer maximum flexibility, are generally not appropriate for broad population surveys. These require limited questions and a small number of categories for analysis. Limited evaluation has been undertaken of trans-inclusive population survey measures for sex/gender, including those currently in use. Using an internet survey and follow-up of 311 participants, and cognitive interviews from a maximum-diversity sub-sample (n = 79), we conducted a mixed-methods evaluation of two existing measures: a two-step question developed in the United States and a multidimensional measure developed in Canada. We found very low levels of item missingness, and no indicators of confusion on the part of cisgender (non-trans) participants for both measures. However, a majority of interview participants indicated problems with each question item set. Agreement between the two measures in assessment of gender identity was very high (K = 0.9081), but gender identity was a poor proxy for other dimensions of sex or gender among trans participants. Issues to inform measure development or adaptation that emerged from analysis included dimensions of sex/gender measured, whether non-binary identities were trans, Indigenous and cultural identities, proxy reporting, temporality concerns, and the inability of a single item to provide a valid measure of sex/gender. Based on this evaluation, we recommend that population surveys meant for multi-purpose analysis consider a new Multidimensional Sex/Gender Measure for testing that includes three simple items (one asked only of a small sub-group) to assess gender

Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations.

Directory of Open Access Journals (Sweden)

Greta R Bauer

Full Text Available Given that an estimated 0.6% of the U.S. population is transgender (trans and that large health disparities for this population have been documented, government and research organizations are increasingly expanding measures of sex/gender to be trans inclusive. Options suggested for trans community surveys, such as expansive check-all-that-apply gender identity lists and write-in options that offer maximum flexibility, are generally not appropriate for broad population surveys. These require limited questions and a small number of categories for analysis. Limited evaluation has been undertaken of trans-inclusive population survey measures for sex/gender, including those currently in use. Using an internet survey and follow-up of 311 participants, and cognitive interviews from a maximum-diversity sub-sample (n = 79, we conducted a mixed-methods evaluation of two existing measures: a two-step question developed in the United States and a multidimensional measure developed in Canada. We found very low levels of item missingness, and no indicators of confusion on the part of cisgender (non-trans participants for both measures. However, a majority of interview participants indicated problems with each question item set. Agreement between the two measures in assessment of gender identity was very high (K = 0.9081, but gender identity was a poor proxy for other dimensions of sex or gender among trans participants. Issues to inform measure development or adaptation that emerged from analysis included dimensions of sex/gender measured, whether non-binary identities were trans, Indigenous and cultural identities, proxy reporting, temporality concerns, and the inability of a single item to provide a valid measure of sex/gender. Based on this evaluation, we recommend that population surveys meant for multi-purpose analysis consider a new Multidimensional Sex/Gender Measure for testing that includes three simple items (one asked only of a small sub-group to

Transgender-inclusive measures of sex/gender for population surveys: Mixed-methods evaluation and recommendations

Science.gov (United States)

Bauer, Greta R.; Braimoh, Jessica; Scheim, Ayden I.; Dharma, Christoffer

2017-01-01

Given that an estimated 0.6% of the U.S. population is transgender (trans) and that large health disparities for this population have been documented, government and research organizations are increasingly expanding measures of sex/gender to be trans inclusive. Options suggested for trans community surveys, such as expansive check-all-that-apply gender identity lists and write-in options that offer maximum flexibility, are generally not appropriate for broad population surveys. These require limited questions and a small number of categories for analysis. Limited evaluation has been undertaken of trans-inclusive population survey measures for sex/gender, including those currently in use. Using an internet survey and follow-up of 311 participants, and cognitive interviews from a maximum-diversity sub-sample (n = 79), we conducted a mixed-methods evaluation of two existing measures: a two-step question developed in the United States and a multidimensional measure developed in Canada. We found very low levels of item missingness, and no indicators of confusion on the part of cisgender (non-trans) participants for both measures. However, a majority of interview participants indicated problems with each question item set. Agreement between the two measures in assessment of gender identity was very high (K = 0.9081), but gender identity was a poor proxy for other dimensions of sex or gender among trans participants. Issues to inform measure development or adaptation that emerged from analysis included dimensions of sex/gender measured, whether non-binary identities were trans, Indigenous and cultural identities, proxy reporting, temporality concerns, and the inability of a single item to provide a valid measure of sex/gender. Based on this evaluation, we recommend that population surveys meant for multi-purpose analysis consider a new Multidimensional Sex/Gender Measure for testing that includes three simple items (one asked only of a small sub-group) to assess gender

A Critique of Health System Performance Measurement.

Science.gov (United States)

Lynch, Thomas

2015-01-01

Health system performance measurement is a ubiquitous phenomenon. Many authors have identified multiple methodological and substantive problems with performance measurement practices. Despite the validity of these criticisms and their cross-national character, the practice of health system performance measurement persists. Theodore Marmor suggests that performance measurement invokes an "incantatory response" wrapped within "linguistic muddle." In this article, I expand upon Marmor's insights using Pierre Bourdieu's theoretical framework to suggest that, far from an aberration, the "linguistic muddle" identified by Marmor is an indicator of a broad struggle about the representation and classification of public health services as a public good. I present a case study of performance measurement from Alberta, Canada, examining how this representational struggle occurs and what the stakes are. © The Author(s) 2015.

Infrared survey of 50 buildings constructed during 100 years: thermal performances and damage conditions

Science.gov (United States)

Ljungberg, Sven-Ake

1995-03-01

Different building constructions and craftsmanship give rise to different thermal performance and damage conditions. The building stock of most industrial countries consists of buildings of various age, and constructions, from old historic buildings with heavy stone or wooden construction, to new buildings with heavy or light concrete construction, or modern steel or wooden construction. In this paper the result from a detailed infrared survey of 50 buildings from six Swedish military camps is presented. The presentation is limited to a comparison of thermal performance and damage conditions of buildings of various ages, functions, and constructions, of a building period of more than 100 years. The result is expected to be relevant even to civilian buildings. Infrared surveys were performed during 1992-1993, with airborne, and mobile short- and longwave infrared systems, out- and indoor thermography. Interpretation and analysis of infrared data was performed with interactive image and analyzing systems. Field inspections were carried out with fiber optics system, and by ocular inspections. Air-exchange rate was measured in order to quantify air leakages through the building envelope, indicated in thermograms. The objects studied were single-family houses, barracks, office-, service-, school- and exercise buildings, military hotels and restaurants, aircraft hangars, and ship factory buildings. The main conclusions from this study are that most buildings from 1880 - 1940 have a solid construction with a high quality of craftsmanship, relatively good thermal performance, due to extremely thick walls, and adding insulation at the attic floor. From about 1940 - 1960 the quality of construction, thermal performance and craftsmanship seem to vary a lot. Buildings constructed during the period of 1960 - 1990 have in general the best thermal performance due to a better insulation capacity, however, also one finds here the greatest variety of problems. The result from this

Description and Evaluation of a Measurement Technique for Assessment of Performing Gender

Science.gov (United States)

Harris, Kathleen Mullan; Halpern, Carolyn Tucker

2016-01-01

The influence of masculinity and femininity on behaviors and outcomes has been extensively studied in social science research using various measurement strategies. In the present paper, we describe and evaluate a measurement technique that uses existing survey items to capture the extent to which an individual behaves similarly to their same-gender peers. We use data from the first four waves of The National Longitudinal Study of Adolescent to Adult Health (Add Health), a nationally representative sample of adolescents (age 12–18) in the United States who were re-interviewed at ages 13–19, 18–26, and 24–32. We estimate split-half reliability and provide evidence that supports the validity of this measurement technique. We demonstrate that the resulting measure does not perform as a trait measure and is associated with involvement in violent fights, a pattern consistent with theory and empirical findings. This measurement technique represents a novel approach for gender researchers with the potential for expanding our current knowledge base. PMID:28630528

National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

International Nuclear Information System (INIS)

2013-01-01

Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results

National and Regional Surveys of Radon Concentration in Dwellings. Review of Methodology and Measurement Techniques

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-12-15

Reliable, comparable and 'fit for purpose' results are essential requirements for any decision based on analytical measurements. For the analyst, the availability of tested and validated sampling and analytical procedures is an extremely important tool for carrying out such measurements. For maximum utility, such procedures should be comprehensive, clearly formulated and readily available to both the analyst and the customer for reference. In the specific case of radon surveys, it is very important to design a survey in such a way as to obtain results that can reasonably be considered representative of a population. Since 2004, the Environment Programme of the IAEA has included activities aimed at the development of a set of procedures for the measurement of radionuclides in terrestrial environmental samples. The development of radon measurement procedures for national and regional surveys started with the collection and review of more than 160 relevant scientific papers. On the basis of this review, this publication summarizes the methodology and the measurement techniques suitable for a population representative national or regional survey on radon concentration in the indoor air of dwellings. The main elements of the survey design are described and discussed, such as the sampling scheme, the protocols, the questionnaire and the data analysis, with particular attention to the potential biases that can affect the representativeness of the results. Moreover, the main measurement techniques suitable for national surveys on indoor radon are reviewed, with particular attention to the elements that can affect the precision and accuracy of the results.

Measurement Of Shariah Stock Performance Using Risk Adjusted Performance

Directory of Open Access Journals (Sweden)

Zuhairan Y Yunan

2015-03-01

Full Text Available The aim of this research is to analyze the shariah stock performance using risk adjusted performance method. There are three parameters to measure the stock performance i.e. Sharpe, Treynor, and Jensen. This performance’s measurements calculate the return and risk factor from shariah stocks. The data that used on this research is using the data of stocks at Jakarta Islamic Index. Sampling method that used on this paper is purposive sampling. This research is using ten companies as a sample. The result shows that from three parameters, the stock that have a best performance are AALI, ANTM, ASII, CPIN, INDF, KLBF, LSIP, and UNTR.DOI: 10.15408/aiq.v7i1.1364

Grating scattering BRDF and imaging performances: A test survey performed in the frame of the flex mission

Science.gov (United States)

Harnisch, Bernd; Deep, Atul; Vink, Ramon; Coatantiec, Claude

2017-11-01

Key components in optical spectrometers are the gratings. Their influence on the overall infield straylight of the spectrometer depends not only on the technology used for grating fabrication but also on the potential existence of ghost images caused by irregularities of the grating constant. For the straylight analysis of spectrometer no general Bidirectional Reflectance Distribution Function (BRDF) model of gratings exist, as it does for optically smooth surfaces. These models are needed for the determination of spectrometer straylight background and for the calculation of spectrometer out of band rejection performances. Within the frame of the Fluorescence Earth Explorer mission (FLEX), gratings manufactured using different technologies have been investigated in terms of straylight background and imaging performance in the used diffraction order. The gratings which have been investigated cover a lithographically written grating, a volume Bragg grating, two holographic gratings and an off-the-shelf ruled grating. In this paper we present a survey of the measured bidirectional reflectance/transmittance distribution function and the determination of an equivalent surface micro-roughness of the gratings, describing the scattering of the grating around the diffraction order. This is specifically needed for the straylight modeling of the spectrometer.

Application of the analytic hierarchy process in the performance measurement of colorectal cancer care for the design of a pay-for-performance program in Taiwan.

Science.gov (United States)

Chung, Kuo-Piao; Chen, Li-Ju; Chang, Yao-Jen; Chang, Yun-Jau; Lai, Mei-Shu

2013-02-01

To prioritize performance measures for colorectal cancer care to facilitate the implementation of a pay-for-performance (PFP) system. Questionnaires survey. Medical hospitals in Taiwan. Sixty-six medical doctors from 5 November 2009 to 10 December 2009. Analytic hierarchy process (AHP) technique. Main outcome measure(s) Performance measures (two pre-treatment, six treatment related and three monitoring related) were used. Forty-eight doctors responded and returned questionnaires (response rate 72.7%) with surgeons and physicians contributing equally. The most important measure was the proportion of colorectal patients who had pre-operative examinations that included chest X-ray and abdominal ultrasound, computed tomography or MRI (global priority: 0.144), followed by the proportion of stages I-III colorectal cancer patients who had undergone a wide surgical resection documented as 'negative margin' (global priority: 0.133) and the proportion of colorectal cancer patients who had undergone surgery with a pathology report that included information on tumor size and node differentiation (global priority: 0.116). Most participants considered that the best interval for the renewal indicators was 3-5 years (43.75%) followed by 5-10 years (27.08%). To design a PFP program, the AHP method is a useful technique to prioritize performance measures, especially in a highly specialized domain such as colorectal cancer care.

Will kinematic Sunyaev-Zel'dovich measurements enhance the science return from galaxy redshift surveys?

Energy Technology Data Exchange (ETDEWEB)

Sugiyama, Naonori S.; Okumura, Teppei [Kavli Institute for the Physics and Mathematics of the Universe (WPI), Todai Institutes for Advanced Study, The University of Tokyo, Chiba 277-8582 (Japan); Spergel, David N., E-mail: nao.s.sugiyama@gmail.com, E-mail: tokumura@asiaa.sinica.edu.tw, E-mail: dns@astro.princeton.edu [Department of Astrophysical Sciences, Princeton University, Peyton Hall, Princeton NJ 08544-0010 (United States)

2017-01-01

Yes. Future CMB experiments such as Advanced ACTPol and CMB-S4 should achieve measurements with S/N of > 0.1 for the typical host halo of galaxies in redshift surveys. These measurements will provide complementary measurements of the growth rate of large scale structure f and the expansion rate of the Universe H to galaxy clustering measurements. This paper emphasizes that there is significant information in the anisotropy of the relative pairwise kSZ measurements. We expand the relative pairwise kSZ power spectrum in Legendre polynomials and consider up to its octopole. Assuming that the noise in the filtered maps is uncorrelated between the positions of galaxies in the survey, we derive a simple analytic form for the power spectrum covariance of the relative pairwise kSZ temperature in redshift space. While many previous studies have assumed optimistically that the optical depth of the galaxies τ{sub T} in the survey is known, we marginalize over τ{sub T}, to compute constraints on the growth rate f and the expansion rate H . For realistic survey parameters, we find that combining kSZ and galaxy redshift survey data reduces the marginalized 1-σ errors on H and f to ∼50-70% compared to the galaxy-only analysis.

Performance measurement in the UK construction industry and its role in supporting the application of lean construction concepts

Directory of Open Access Journals (Sweden)

Saad Sarhan

2013-03-01

Full Text Available Performance measurement has received substantial attention from researchers and the construction industry over the past two decades. This study sought to assess UK practitioners’ awareness of the importance of the use of appropriate performance measures and its role in supporting the application of Lean Construction (LC concepts. To enable the study to achieve its objectives, a review of a range of measurements developed to evaluate project performance including those devoted to support LC efforts was conducted. Consequently a questionnaire survey was developed and sent to 198 professionals in the UK construction industry as well as a small sample of academics with an interest in LC. Results indicated that although practitioners recognise the importance of the selection of non-financial performance measures, it has not been properly and widely implemented. The study identified the most common techniques used by UK construction organisations for performance measurement, and ranked a number of non-financial key performance indicators as significant. Some professed to have embraced the Last Planner System methodology as a means for performance measurement and organisational learning, while further questioning suggested otherwise. It was also suggested that substance thinking amongst professionals could be a significant hidden barrier that militates against the successful implementation of LC.

MEASUREMENT: ACCOUNTING FOR RELIABILITY IN PERFORMANCE ESTIMATES.

Science.gov (United States)

Waterman, Brian; Sutter, Robert; Burroughs, Thomas; Dunagan, W Claiborne

2014-01-01

When evaluating physician performance measures, physician leaders are faced with the quandary of determining whether departures from expected physician performance measurements represent a true signal or random error. This uncertainty impedes the physician leader's ability and confidence to take appropriate performance improvement actions based on physician performance measurements. Incorporating reliability adjustment into physician performance measurement is a valuable way of reducing the impact of random error in the measurements, such as those caused by small sample sizes. Consequently, the physician executive has more confidence that the results represent true performance and is positioned to make better physician performance improvement decisions. Applying reliability adjustment to physician-level performance data is relatively new. As others have noted previously, it's important to keep in mind that reliability adjustment adds significant complexity to the production, interpretation and utilization of results. Furthermore, the methods explored in this case study only scratch the surface of the range of available Bayesian methods that can be used for reliability adjustment; further study is needed to test and compare these methods in practice and to examine important extensions for handling specialty-specific concerns (e.g., average case volumes, which have been shown to be important in cardiac surgery outcomes). Moreover, it's important to note that the provider group average as a basis for shrinkage is one of several possible choices that could be employed in practice and deserves further exploration in future research. With these caveats, our results demonstrate that incorporating reliability adjustment into physician performance measurements is feasible and can notably reduce the incidence of "real" signals relative to what one would expect to see using more traditional approaches. A physician leader who is interested in catalyzing performance improvement

Which measure of quality of life performs best in older age? A comparison of the OPQOL, CASP-19 and WHOQOL-OLD.

Science.gov (United States)

Bowling, Ann; Stenner, Paul

2011-03-01

Most measures of quality of life (QoL) are based on 'expert' opinions. This study describes a new measure of QoL in older age, the Older People's QoL Questionnaire (OPQOL), which is unique in being derived from the views of lay people, cross-checked against theoretical models for assessment of comprehensiveness. Its performance was assessed cross-sectionally and longitudinally. It was compared with two existing QoL measures in the cross-sectional studies in order to identify the optimal measure for use with older populations. Data were taken from three surveys of older people living at home in Britain in 2007-2008: one population survey of people aged 65+, one focused enumeration survey of ethnically diverse older people aged 65+, one follow-up of a population survey of people aged 65+ at baseline in 1999/2000. Measures were QoL (using OPQOL, Control, Autonomy, Satisfaction, Pleasure--19 items (CASP-19), World Health Organization Quality of Life questionnaire--version for older people (WHOQOL-OLD)), health, social and socioeconomic circumstances. The CASP-19 and WHOQOL-OLD were not administered to the longitudinal sample in order to reduce respondent burden. Psychometric tests were applied to each QoL measure. The OPQOL, CASP-19 and WHOQOL-OLD performed well with the cross-sectional samples; however, only the OPQOL met criteria for internal consistency in the Ethnibus samples. The OPQOL is of potential value in the outcome assessment of health and social interventions, which can have a multidimensional impact on people's lives. Further research is needed to examine whether differences by ethnicity reflect real differences in QoL, methodological issues, variations in expectations or cultural differences in reporting.

PRINCIPLES OF THE SUPPLY CHAIN PERFORMANCE MEASUREMENT

OpenAIRE

BEATA ŒLUSARCZYK; SEBASTIAN KOT

2012-01-01

Measurement of performance in every business management is a crucial activity allowing for effectiveness increase. The lack of suitable performance measurement is especially noticed in complex systems as supply chains. Responsible persons cannot manage effectively without suitable set of measures those are base for comparison to previous data or effects of other supply chain functioning. The analysis shows that it is very hard to find balanced set of supply chain performance measures those sh...

Measuring patient safety culture in Taiwan using the Hospital Survey on Patient Safety Culture (HSOPSC).

Science.gov (United States)

Chen, I-Chi; Li, Hung-Hui

2010-06-07

Patient safety is a critical component to the quality of health care. As health care organizations endeavour to improve their quality of care, there is a growing recognition of the importance of establishing a culture of patient safety. In this research, the authors use the Hospital Survey on Patient Safety Culture (HSOPSC) questionnaire to assess the culture of patient safety in Taiwan and attempt to provide an explanation for some of the phenomena that are unique in Taiwan. The authors used HSOPSC to measure the 12 dimensions of the patient safety culture from 42 hospitals in Taiwan. The survey received 788 respondents including physicians, nurses, and non-clinical staff. This study used SPSS 15.0 for Windows and Amos 7 software tools to perform the statistical analysis on the survey data, including descriptive statistics and confirmatory factor analysis of the structural equation model. The overall average positive response rate for the 12 patient safety culture dimensions of the HSOPSC survey was 64%, slightly higher than the average positive response rate for the AHRQ data (61%). The results showed that hospital staff in Taiwan feel positively toward patient safety culture in their organization. The dimension that received the highest positive response rate was "Teamwork within units", similar to the results reported in the US. The dimension with the lowest percentage of positive responses was "Staffing". Statistical analysis showed discrepancies between Taiwan and the US in three dimensions, including "Feedback and communication about error", "Communication openness", and "Frequency of event reporting". The HSOPSC measurement provides evidence for assessing patient safety culture in Taiwan. The results show that in general, hospital staffs in Taiwan feel positively toward patient safety culture within their organization. The existence of discrepancies between the US data and the Taiwanese data suggest that cultural uniqueness should be taken into

Performance of biometric quality measures.

Science.gov (United States)

Grother, Patrick; Tabassi, Elham

2007-04-01

We document methods for the quantitative evaluation of systems that produce a scalar summary of a biometric sample's quality. We are motivated by a need to test claims that quality measures are predictive of matching performance. We regard a quality measurement algorithm as a black box that converts an input sample to an output scalar. We evaluate it by quantifying the association between those values and observed matching results. We advance detection error trade-off and error versus reject characteristics as metrics for the comparative evaluation of sample quality measurement algorithms. We proceed this with a definition of sample quality, a description of the operational use of quality measures. We emphasize the performance goal by including a procedure for annotating the samples of a reference corpus with quality values derived from empirical recognition scores.

Developing Human Performance Measures (PSAM8)

International Nuclear Information System (INIS)

Jeffrey C. Joe

2006-01-01

Through the reactor oversight process (ROP), the U.S. Nuclear Regulatory Commission (NRC) monitors the performance of utilities licensed to operate nuclear power plants. The process is designed to assure public health and safety by providing reasonable assurance that licensees are meeting the cornerstones of safety and designated crosscutting elements. The reactor inspection program, together with performance indicators (PIs), and enforcement activities form the basis for the NRC's risk-informed, performance based regulatory framework. While human performance is a key component in the safe operation of nuclear power plants and is a designated cross-cutting element of the ROP, there is currently no direct inspection or performance indicator for assessing human performance. Rather, when human performance is identified as a substantive cross cutting element in any 1 of 3 categories (resources, organizational or personnel), it is then evaluated for common themes to determine if follow-up actions are warranted. However, variability in human performance occurs from day to day, across activities that vary in complexity, and workgroups, contributing to the uncertainty in the outcomes of performance. While some variability in human performance may be random, much of the variability may be attributed to factors that are not currently assessed. There is a need to identify and assess aspects of human performance that relate to plant safety and to develop measures that can be used to successfully assure licensee performance and indicate when additional investigation may be required. This paper presents research that establishes a technical basis for developing human performance measures. In particular, we discuss: (1) how historical data already gives some indication of connection between human performance and overall plant performance, (2) how industry led efforts to measure and model human performance and organizational factors could serve as a data source and basis for a

Technical basis for the performance of radiological surveys in support of nuclear facility decommissioning/deactivation utilizing the Laser-Assisted Ranging and Data System (LARADS)

International Nuclear Information System (INIS)

Wade, C.D.

1997-06-01

This document describes the implementation of the Laser-Assisted Ranging and Data System (LARADS) as it applies to performing radiological surveys on facility exterior and interior surfaces. The LARADS enables the system operator to document scanning measurements, stationary radiological measurements, and sample locations of surfaces, with the radiological readings and exact coordinates (<2 cm [0.8 in.] precision) automatically logged in real-time. After the survey is completed, the information is downloaded to a geographical information system, and the radiological information is overlaid on a digital picture of the survey area or may be generated as a computer- aided drafted drawing. The final product is a track map or contour of the survey area that clearly shows the area covered by the detector and the locations of elevated readings. The exact reproducibility of data facilitates locating hot spots for remediation and provides for objective review by regulators and verifiers

A Comparison of Survey Measures and Biomarkers of Secondhand Tobacco Smoke Exposure among Nonsmokers.

Science.gov (United States)

Okoli, Chizimuzo

2016-01-01

Secondhand tobacco smoke (SHS) exposure causes several adverse physical health outcomes. Conceptual differences in survey measures of 'psychosocial' (SHS exposure from smokers in an individual's life) and 'physical' (environments where an individual is exposed to SHS) SHS exposure exist. Few studies have examined the association between psychosocial and physical SHS exposures measures in comparison to biomarkers of SHS exposure. A secondary analysis of cross-sectional data was examined among a convenience sample of 20 adults. Data included survey items on SHS exposure and hair nicotine and saliva cotinine levels. Spearman analysis was used to assess correlations among variables. Medium and strong correlations were found among SHS exposure measures with the exception of saliva cotinine levels. Strong correlations were found among and between psychosocial and physical SHS exposure measures. Hair nicotine levels had medium strength associations with only perceived frequency of SHS exposure. As psychosocial measures of exposure were associated with biomarkers, such measures (particularly perceived frequency of SHS exposure) should be added to surveys in addition to physical SHS exposure measures to enhance accuracy of SHS measurement. Future explorations with robust sample sizes should further examine the strength of relationship between psychosocial and physical SHS exposure measures. © 2015 Wiley Periodicals, Inc.

Development and validation of a survey instrument to measure children's advertising literacy

NARCIS (Netherlands)

Rozendaal, E.; Opree, S.J.; Buijzen, M.A.

2016-01-01

The aim of this study was to develop and validate a survey measurement instrument for children's advertising literacy. Based on the multidimensional conceptualization of advertising literacy by 0056"> Rozendaal, Lapierre, Van Reijmersdal, and Buijzen (2011), 39 items were created to measure two

Facilities Performance Indicators Report, 2004-05. Facilities Core Data Survey

Science.gov (United States)

Glazner, Steve, Ed.

2006-01-01

The purpose of "Facilities Performance Indicators" is to provide a representative set of statistics about facilities in educational institutions. The second iteration of the web-based Facilities Core Data Survey was posted and available to facilities professionals at more than 3,000 institutions in the Fall of 2005. The website offered a printed…

Practical implications of neutron survey instrument performance

International Nuclear Information System (INIS)

Tanner, R. J.; Bartlett, D. T.; Hager, I. G.; Jones, I. N.; Molinos, C.; Roberts, N. J.; Taylor, G. C.; Thomas, D. J.

2004-01-01

Improvements have been made to the Monte Carlo modelling used to calculate the response of the neutron survey instruments most commonly used in the UK, for neutron energies up to 20 MeV. The improved modelling of the devices includes the electronics and battery pack, allowing better calculations of both the energy and angle dependence of response. These data are used to calculate the response of the instruments in rotationally and fully isotropic, as well as unidirectional fields. Experimental measurements with radionuclide sources and monoenergetic neutron fields have been, and continue to be made, to test the calculated response characteristics. The enhancements to the calculations have involved simulation of the sensitivity of the response to variations in instrument manufacture, and will include the influence of the user and floor during measurements. The practical implications of the energy and angle dependence of response, variations in manufacture, and the influence of the user are assessed by folding the response characteristics with workplace energy and direction distributions. (authors)

Performance measurement in governmental agencies using BSC-AHP: A case study of Civil Registry Office in Tehran

Directory of Open Access Journals (Sweden)

Ahmad Valashjerdi Majd Abad Kohneh

2013-04-01

Full Text Available Measuring the performance of governmental organizations plays an important role on increasing public satisfaction in any society. One of the effective models for assessing the organizations performance is balance scorecard (BSC model, which investigates all aspects of organizations. In this paper, we use a hybrid of analytical hierarchy process along with BSC to measure the performance of five different civil registry offices in Tehran, Iran. We use fuzzy terms to handle uncertainty in input numbers and using some technique convert fuzzy numbers into crisp values. The results of our survey indicate that learning and development is number one priority with relative importance of 0.491, followed by customer with relative importance of 0.293, internal process with relative importance of 0.173 and financial affairs comes at last with relative weight of 0.043. The study uses organizational researchers, training, quality, customer satisfaction, performance measurement, expenses and annual budget as major components for analyzing five regions. We have also performed sensitivity analysis to see the effects of different changes on ranking.

Do Survey Data Estimate Earnings Inequality Correctly? Measurement Errors among Black and White Male Workers

Science.gov (United States)

Kim, ChangHwan; Tamborini, Christopher R.

2012-01-01

Few studies have considered how earnings inequality estimates may be affected by measurement error in self-reported earnings in surveys. Utilizing restricted-use data that links workers in the Survey of Income and Program Participation with their W-2 earnings records, we examine the effect of measurement error on estimates of racial earnings…

Measuring Diversity and Inclusion in Academic Medicine: The Diversity Engagement Survey (DES)

Science.gov (United States)

Person, Sharina D.; Jordan, C. Greer; Allison, Jeroan J.; Fink Ogawa, Lisa M.; Castillo-Page, Laura; Conrad, Sarah; Nivet, Marc A.; Plummer, Deborah L.

2018-01-01

Purpose To produce a physician and scientific workforce capable of delivering high quality, culturally competent health care and research, academic medical centers must assess their capacity for diversity and inclusion and respond to identified opportunities. Thus, the Diversity Engagement Survey (DES) is presented as a diagnostic and benchmarking tool. Method The 22-item DES connects workforce engagement theory with inclusion and diversity constructs. Face and content validity were established based on decades of previous work to promote institutional diversity. The survey was pilot tested at a single academic medical center and subsequently administered at 13 additional academic medical centers. Cronbach alphas assessed internal consistency and Confirmatory Factor Analysis (CFA) established construct validity. Criterion validity was assessed by observed separation in scores for groups traditionally recognized to have less workforce engagement. Results The sample consisted of 13,694 individuals at 14 medical schools from across the U.S. who responded to the survey administered between 2011– 2012. The Cronbach alphas for inclusion and engagement factors (range: 0.68 to 0.85), CFA fit indices, and item correlations with latent constructs, indicated an acceptable model fit and that questions measured the intended concepts. DES scores clearly distinguished higher and lower performing institutions. The DES detected important disparities for black, women, and those who did not have heterosexual orientation. Conclusions This study demonstrated that the DES is a reliable and valid instrument for internal assessment and evaluation or external benchmarking of institutional progress in building inclusion and engagement. PMID:26466376

Measuring Workplace Travel Behaviour: Validity and Reliability of Survey Questions

Directory of Open Access Journals (Sweden)

Nicholas A. Petrunoff

2013-01-01

Full Text Available Background. The purpose of this study was to assess the (previously untested reliability and validity of survey questions commonly used to assess travel mode and travel time. Methods. Sixty-five respondents from a staff survey of travel behaviour conducted in a south-western Sydney hospital agreed to complete a travel diary for a week, wear an accelerometer over the same period, and twice complete an online travel survey an average of 21 days apart. The agreement in travel modes between the self-reported online survey and travel diary was examined with the kappa statistic. Spearman’s correlation coefficient was used to examine agreement of travel time from home to workplace measured between the self-reported online survey and four-day travel diary. Moderate-to-vigorous physical activity (MVPA time of active and nonactive travellers was compared by t-test. Results. There was substantial agreement between travel modes (K=0.62, P<0.0001 and a moderate correlation for travel time (ρ=0.75, P<0.0001 reported in the travel diary and online survey. There was a high level of agreement for travel mode (K=0.82, P<0.0001 and travel time (ρ=0.83, P<0.0001 between the two travel surveys. Accelerometer data indicated that for active travellers, 16% of the journey-to-work time is MVPA, compared with 6% for car drivers. Active travellers were significantly more active across the whole workday. Conclusions. The survey question “How did you travel to work this week? If you used more than one transport mode specify the one you used for the longest (distance portion of your journey” is reliable over 21 days and agrees well with a travel diary.

Does hospital financial performance measure up?

Science.gov (United States)

Cleverley, W O; Harvey, R K

1992-05-01

Comparisons are continuously being made between the financial performance, products and services, of the healthcare industry and those of non-healthcare industries. Several useful measures of financial performance--profitability, liquidity, financial risk, asset management and replacement, and debt capacity, are used by the authors to compare the financial performance of the hospital industry with that of the industrial, transportation and utility sectors. Hospitals exhibit weaknesses in several areas. Goals are suggested for each measure to bring hospitals closer to competitive levels.

Measurement of ambient dose equivalent H*(10) and directional dose equivalent H'(0.07) with pocket sized survey meters

International Nuclear Information System (INIS)

Iwatschenko, Michael

2008-01-01

Full text: In many parts of the world, predominantly in Europe, small sized survey meters based on Geiger-Mueller or proportional counters are widely used for dose rate and dose equivalent rate measurements, while in other regions, especially in the U.S., ionisation chambers are preferred for this task. This paper tries to shed some light on the likely reasons for these two diverging instrumental inclinations. Their respective strengths and weaknesses is analyzed in respect to energy response, dose rate measuring range, size, weight and susceptibility to environmental influences. Furthermore the response and limitations regarding the measurement of pulsed radiation (medical X-ray and CT-devices, accelerators, non-destructive testing) is discussed. A newly developed pocket size instrument based on a pan-cake Geiger-Mueller tube is used as an example to explain the capability and flexibility of modern survey meters. The RadEye B20 is a compact multi-purpose dose rate meter and contamination meter for alpha, beta, gamma and X-ray radiation. By virtue of carefully designed multi-layer gamma energy filters, H*(10) (deep dose) or H'(0,07) (shallow dose) measurements from 17 - 1300 keV can be performed. The instrument can even be worn in a belt holster, so that the impact to the mobility of the user is minimized. For emergency response purposes alpha and beta contamination can be discriminated using another optional filter; a simple sample changer adapter can extend the scope of application. Immediate and reproducible counter measurements, e.g. of smear tests can be performed locally. (author)

Performance Measurement Systems in Swedish Health Care Services

OpenAIRE

Kollberg, Beata

2007-01-01

In the quality management literature, measurements are attributed great importance in improving products and processes. Systems for performance measurement assessing financial and non-financial measurements were developed in the late 1980s and early 1990s. The research on performance measurement systems has mainly been focused on the design of different performance measurement systems. Many authors are occupied with the study of the constructs of measures and developing prescriptive models of...

Performance Measurement at Universities

DEFF Research Database (Denmark)

Lueg, Klarissa

2014-01-01

This paper proposes empirical approaches to testing the reliability, validity, and organizational effectiveness of student evaluations of teaching (SET) as a performance measurement instrument in knowledge management at the institutional level of universities. Departing from Weber’s concept...

Medicare Advantage and Fee-for-Service Performance on Clinical Quality and Patient Experience Measures: Comparisons from Three Large States.

Science.gov (United States)

Timbie, Justin W; Bogart, Andy; Damberg, Cheryl L; Elliott, Marc N; Haas, Ann; Gaillot, Sarah J; Goldstein, Elizabeth H; Paddock, Susan M

2017-12-01

To compare performance between Medicare Advantage (MA) and Fee-for-Service (FFS) Medicare during a time of policy changes affecting both programs. Performance data for 16 clinical quality measures and 6 patient experience measures for 9.9 million beneficiaries living in California, New York, and Florida. We compared MA and FFS performance overall, by plan type, and within service areas associated with contracts between CMS and MA organizations. Case mix-adjusted analyses (for measures not typically adjusted) were used to explore the effect of case mix on MA/FFS differences. Performance measures were submitted by MA organizations, obtained from the nationwide fielding of the Medicare Consumer Assessment of Healthcare Providers and Systems (MCAHPS) Survey, or derived from claims. Overall, MA outperformed FFS on all 16 clinical quality measures. Differences were large for HEDIS measures and small for Part D measures and remained after case mix adjustment. MA enrollees reported better experiences overall, but FFS beneficiaries reported better access to care. Relative to FFS, performance gaps were much wider for HMOs than PPOs. Excluding HEDIS measures, MA/FFS differences were much smaller in contract-level comparisons. Medicare Advantage/Fee-for-Service differences are often large but vary in important ways across types of measures and contracts. © Health Research and Educational Trust.

Measurement of radon concentration in water using the portable radon survey meter.

Science.gov (United States)

Yokoyama, S; Mori, N; Shimo, M; Fukushi, M; Ohnuma, S

2011-07-01

A measurement method for measuring radon in water using the portable radon survey meter (RnSM) was developed. The container with propeller was used to stir the water samples and release radon from the water into the air in a sample box of the RnSM. In this method, the measurement of error would be water was >20 Bq l(-1).

Measuring transportation at a human scale: An intercept survey approach to capture pedestrian activity

OpenAIRE

Schneider, Robert James

2013-01-01

Pedestrian travel data are critical for measuring and analyzing sustainable transportation systems. However, traditional household travel surveys and analysis methods often ignore secondary modes, such as walking from a street parking space to a store entrance or walking from a bus stop to home. New data collection and analysis techniques are needed, especially in areas where walking is common. This paper describes an intercept survey methodology used to measure retail pharmacy customer trave...

Measuring sexual function in community surveys: development of a conceptual framework.

Science.gov (United States)

Mitchell, Kirstin R; Wellings, Kaye

2013-01-01

Among the many psychometric measures of sexual (dys)function, none is entirely suited to use in community surveys. Faced with the need to include a brief and non-intrusive measure of sexual function in a general population survey, a new measure was developed. Findings from qualitative research with men and women in the community designed to inform the conceptual framework for this measure are presented. Thirty-two semi-structured interviews with individuals recruited from a general practice, an HIV/AIDS charity, and a sexual problems clinic were conducted. From their accounts, 31 potential criteria of a functional sex life were identified. Using evidence from qualitative data and the existing literature, and applying a set of decision rules, the list was reduced to 13 (eight for those not in a relationship), and a further eight criteria were added to enable individuals to self-rate their level of function and indicate the severity of difficulties. These criteria constitute a conceptual framework that is grounded in participant perceptions; is relevant to all, regardless of sexual experience or orientation; provides opportunity to state the degree of associated distress; and incorporates relational, psychological, and physiological aspects. It provides the conceptual basis for a concise and acceptable measure of sexual function.

Application Of Quality Function Deployment (QFD) To Measure Performance

International Nuclear Information System (INIS)

Fazila Said; Mohd Amirul Shafiq Shafiee; Nurul Hasanah Mohd Abd Basir

2014-01-01

This study aims to measure service quality performance and identify critical service quality characteristics as perceived by the customers. An integrated results survey that conducted by seven service centers that certified with Quality Management System (QMS) in Nuclear Malaysia are analysed. This is followed by constructing House of Quality (HoQ) and identifying other parameters for the Quality Function Deployment (QFD) matrix. HoQ is a simple and attractive service innovation tool which can be used to directly show comprehensive information which contained the voice of customer (VOC), technical response, technical correlation and matrix relationship. This study revealed that the information's from HoQ with further discussion on planning part which can be used to assist management in knowing the overall detail information of service center achievement and recognizes the solution for unsatisfied customer through priority improvement activity to enhance the customer satisfaction in future. (author)

A survey on relationship between capital structure, free cash flow and diversification and firm performance of listed companies in Tehran Stock Exchange

Directory of Open Access Journals (Sweden)

Mohammad Khodaei Valahzaghard

2014-10-01

Full Text Available This paper presents an empirical investigation to study the effects of free cash flow, share diversification and capital structure on Tobin-Q in selected firms on Tehran Stock Exchange. The population of the survey includes 520 firms listed on this exchange until year 2012 and the survey uses a sample of 105 firms, randomly. The study uses the models originally developed by Palepu (1985 [Palepu, K. (1985. Diversification strategy, profit performance and the entropy measure. Strategic Management Journal, 6(3, 239-255.] to measure the effects of different factors on Tobin Q. The study has indicated that while capital structure and free cash flow influence positively on Tobin Q, diversification has maintained a negative and meaningful relationship with Tobin Q.

Scalable Performance Measurement and Analysis

Energy Technology Data Exchange (ETDEWEB)

Gamblin, Todd [Univ. of North Carolina, Chapel Hill, NC (United States)

2009-01-01

Concurrency levels in large-scale, distributed-memory supercomputers are rising exponentially. Modern machines may contain 100,000 or more microprocessor cores, and the largest of these, IBM's Blue Gene/L, contains over 200,000 cores. Future systems are expected to support millions of concurrent tasks. In this dissertation, we focus on efficient techniques for measuring and analyzing the performance of applications running on very large parallel machines. Tuning the performance of large-scale applications can be a subtle and time-consuming task because application developers must measure and interpret data from many independent processes. While the volume of the raw data scales linearly with the number of tasks in the running system, the number of tasks is growing exponentially, and data for even small systems quickly becomes unmanageable. Transporting performance data from so many processes over a network can perturb application performance and make measurements inaccurate, and storing such data would require a prohibitive amount of space. Moreover, even if it were stored, analyzing the data would be extremely time-consuming. In this dissertation, we present novel methods for reducing performance data volume. The first draws on multi-scale wavelet techniques from signal processing to compress systemwide, time-varying load-balance data. The second uses statistical sampling to select a small subset of running processes to generate low-volume traces. A third approach combines sampling and wavelet compression to stratify performance data adaptively at run-time and to reduce further the cost of sampled tracing. We have integrated these approaches into Libra, a toolset for scalable load-balance analysis. We present Libra and show how it can be used to analyze data from large scientific applications scalably.

The impact of methodology in innovation measurement

Energy Technology Data Exchange (ETDEWEB)

Wilhelmsen, L.; Bugge, M.; Solberg, E.

2016-07-01

Innovation surveys and rankings such as the Community Innovation Survey (CIS) and Innovation Union Scoreboard (IUS) have developed into influential diagnostic tools that are often used to categorize countries according to their innovation performance and to legitimise innovation policies. Although a number of ongoing processes are seeking to improve existing frameworks for measuring innovation, there are large methodological differences across countries in the way innovation is measured. This causes great uncertainty regarding a) the coherence between data from innovation surveys, b) actual innovativeness of the economy, and c) the validity of research based on innovation data. Against this background we explore empirically how different survey methods for measuring innovation affect reported innovation performance. The analysis is based on a statistical exercise comparing the results from three different methodological versions of the same survey for measuring innovation in the business enterprise sector in Norway. We find striking differences in reported innovation performance depending on how the surveys are carried out methodologically. The paper concludes that reported innovation performance is highly sensitive to and strongly conditioned by methodological context. This represents a need for increased caution and awareness around data collection and research based on innovation data, and not least in terms of aggregation of data and cross-country comparison. (Author)

A performance measurement framework for the South African bulk export wine supply chain

Directory of Open Access Journals (Sweden)

Johan B. Smit

2017-09-01

Full Text Available Background: Many participants in the South African wine industry still exhibit low supply chain maturity in the management of their supply chains. This hampers export performance and ultimately client satisfaction. The development and tracking of appropriate metrics are key steps in improving supply chain performance. Objectives: The purpose of this study was to develop a performance measurement framework for the South African wine industry, focussing on the bulk export segment. Method: The framework was developed using an emergent multi-phased exploratory approach. The approach was implemented in two distinct phases, namely qualitative research followed by quantitative research in each of three iterations to develop and refine the framework. In each iteration, the qualitative research phase consisted of a literature survey, semi-structured and unstructured interviews and case studies, while the quantitative research phase consisted of the development, distribution, completion and analysis of the framework questionnaire, each iteration building on the framework outputs from the previous iteration. Results: The research highlighted that the wine supply chain performance of bulk exports is hindered by the lack of a measurement culture, hampering the identification and prioritisation of interventions. The creation of a performance measurement framework in conjunction with industry, and informed by the Supply Chain Operations Reference framework, creates a platform for the industry to address these challenges. Conclusion: The implementation of this framework will provide performance visibility for cellars in the wine industry. This would enable them to improve their logistics processes and increase their supply chain maturity, ultimately enabling benchmarking against competing supply chains both within South Africa and abroad, such as in Australia, Argentina and Chile.

The measurement of low pay in the UK labour force survey

OpenAIRE

Skinner, Chris; Stuttard, Nigel; Beissel-Durrant, Gabriele; Jenkins, James

2003-01-01

Consideration of the National Minimum Wage requires estimates of the distribution of hourly pay. The UK Labour Force Survey (LFS) is a key source of such estimates. The approach most frequently adopted by researchers has been to measure hourly earnings from several questions on pay and hours. The Office for National Statistics is now applying a new approach, based on an alternative more direct measurement introduced in March 1999. These two measures do not produce identical values and this pa...

Benchmarking and Performance Measurement.

Science.gov (United States)

Town, J. Stephen

This paper defines benchmarking and its relationship to quality management, describes a project which applied the technique in a library context, and explores the relationship between performance measurement and benchmarking. Numerous benchmarking methods contain similar elements: deciding what to benchmark; identifying partners; gathering…

Health Plan Performance Measurement within Medicare Subvention.

Science.gov (United States)

1998-06-01

the causes of poor performance (Siren & Laffel, 1996). Although outcomes measures such as nosocomial infection rates, admission rates for select...defined. Traditional outcomes measures include infection rates, morbidity, and mortality. The problem with these traditional measures is... Maternal /Child Care Indicators Nursing Staffing Indicators Outcome Indicators Technical Outcomes Plan Performance Stability of Health Plan

Angular Baryon Acoustic Oscillation measure at z=2.225 from the SDSS quasar survey

Science.gov (United States)

de Carvalho, E.; Bernui, A.; Carvalho, G. C.; Novaes, C. P.; Xavier, H. S.

2018-04-01

Following a quasi model-independent approach we measure the transversal BAO mode at high redshift using the two-point angular correlation function (2PACF). The analyses done here are only possible now with the quasar catalogue from the twelfth data release (DR12Q) from the Sloan Digital Sky Survey, because it is spatially dense enough to allow the measurement of the angular BAO signature with moderate statistical significance and acceptable precision. Our analyses with quasars in the redshift interval z in [2.20,2.25] produce the angular BAO scale θBAO = 1.77° ± 0.31° with a statistical significance of 2.12 σ (i.e., 97% confidence level), calculated through a likelihood analysis performed using the theoretical covariance matrix sourced by the analytical power spectra expected in the ΛCDM concordance model. Additionally, we show that the BAO signal is robust—although with less statistical significance—under diverse bin-size choices and under small displacements of the quasars' angular coordinates. Finally, we also performed cosmological parameter analyses comparing the θBAO predictions for wCDM and w(a)CDM models with angular BAO data available in the literature, including the measurement obtained here, jointly with CMB data. The constraints on the parameters ΩM, w0 and wa are in excellent agreement with the ΛCDM concordance model.

A Performance Survey on Stack-based and Register-based Virtual Machines

OpenAIRE

Fang, Ruijie; Liu, Siqi

2016-01-01

Virtual machines have been widely adapted for high-level programming language implementations and for providing a degree of platform neutrality. As the overall use and adaptation of virtual machines grow, the overall performance of virtual machines has become a widely-discussed topic. In this paper, we present a survey on the performance differences of the two most widely adapted types of virtual machines - the stack-based virtual machine and the register-based virtual machine - using various...

A Survey of the Duties and Job Performance of Student Assistants in Access Services

Science.gov (United States)

Tolppanen, Bradley P.; Derr, Janice

2009-01-01

The results of a recently conducted Web-based survey of Access Services department supervisors are presented in this article. The survey, which was completed by 94 respondents, identified 19 core tasks completed by student assistants and further found a high overall approval of student assistant job performance. The information generated by the…

Measuring fertility through mobile‒phone based household surveys: Methods, data quality, and lessons learned from PMA2020 surveys

Directory of Open Access Journals (Sweden)

Yoonjoung Choi

2018-05-01

Full Text Available Background: PMA2020 is a survey platform with resident enumerators using mobile phones. Instead of collecting full birth history, total fertility rates (TFR have been measured with a limited number of questions on recent births. Employing new approaches provides opportunities to test and advance survey methods. Objective: This study aims to assess the quality of fertility data in PMA2020 surveys, focusing on bias introduced from the questionnaire and completeness and distribution of birth month and year, and to estimate TFR adjusted for identified data quality issues. Methods: To assess underestimation from the questionnaire, we simulated births that would be counted using the PMA2020 questionnaires compared to births identified from full birth history. We analyzed the latest Demographic and Health Surveys in ten countries where PMA2020 surveys have been implemented. We assessed the level of reporting completeness for birth month and year and heaping of birth month, analyzing 39 PMA2020 surveys. Finally, TFR were calculated and adjusted for biases introduced from the questionnaire and heaping in birth month. Results: Simple questions introduced minor bias from undercounting multiple births, which was expected and correctable. Meanwhile, incomplete reporting of birth month was relatively high, and the default value of January in data collection software systematically moved births with missing months out of the reference period. On average across the 39 surveys, TFR increased by 1.6Š and 2.4Š, adjusted for undercounted multiple births and heaping on January, respectively. Contribution: This study emphasizes the importance of enumerator training and provides critical insight in software programming in surveys using mobile technologies.

Measurement of thermal conductivity and diffusivity in situ: Literature survey and theoretical modelling of measurements

Energy Technology Data Exchange (ETDEWEB)

Kukkonen, I.; Suppala, I. [Geological Survey of Finland, Espoo (Finland)

1999-01-01

In situ measurements of thermal conductivity and diffusivity of bedrock were investigated with the aid of a literature survey and theoretical simulations of a measurement system. According to the surveyed literature, in situ methods can be divided into `active` drill hole methods, and `passive` indirect methods utilizing other drill hole measurements together with cutting samples and petrophysical relationships. The most common active drill hole method is a cylindrical heat producing probe whose temperature is registered as a function of time. The temperature response can be calculated and interpreted with the aid of analytical solutions of the cylindrical heat conduction equation, particularly the solution for an infinite perfectly conducting cylindrical probe in a homogeneous medium, and the solution for a line source of heat in a medium. Using both forward and inverse modellings, a theoretical measurement system was analysed with an aim at finding the basic parameters for construction of a practical measurement system. The results indicate that thermal conductivity can be relatively well estimated with borehole measurements, whereas thermal diffusivity is much more sensitive to various disturbing factors, such as thermal contact resistance and variations in probe parameters. In addition, the three-dimensional conduction effects were investigated to find out the magnitude of axial `leak` of heat in long-duration experiments. The radius of influence of a drill hole measurement is mainly dependent on the duration of the experiment. Assuming typical conductivity and diffusivity values of crystalline rocks, the measurement yields information within less than a metre from the drill hole, when the experiment lasts about 24 hours. We propose the following factors to be taken as basic parameters in the construction of a practical measurement system: the probe length 1.5-2 m, heating power 5-20 Wm{sup -1}, temperature recording with 5-7 sensors placed along the probe, and

Measurement of thermal conductivity and diffusivity in situ: Literature survey and theoretical modelling of measurements

International Nuclear Information System (INIS)

Kukkonen, I.; Suppala, I.

1999-01-01

In situ measurements of thermal conductivity and diffusivity of bedrock were investigated with the aid of a literature survey and theoretical simulations of a measurement system. According to the surveyed literature, in situ methods can be divided into 'active' drill hole methods, and 'passive' indirect methods utilizing other drill hole measurements together with cutting samples and petrophysical relationships. The most common active drill hole method is a cylindrical heat producing probe whose temperature is registered as a function of time. The temperature response can be calculated and interpreted with the aid of analytical solutions of the cylindrical heat conduction equation, particularly the solution for an infinite perfectly conducting cylindrical probe in a homogeneous medium, and the solution for a line source of heat in a medium. Using both forward and inverse modellings, a theoretical measurement system was analysed with an aim at finding the basic parameters for construction of a practical measurement system. The results indicate that thermal conductivity can be relatively well estimated with borehole measurements, whereas thermal diffusivity is much more sensitive to various disturbing factors, such as thermal contact resistance and variations in probe parameters. In addition, the three-dimensional conduction effects were investigated to find out the magnitude of axial 'leak' of heat in long-duration experiments. The radius of influence of a drill hole measurement is mainly dependent on the duration of the experiment. Assuming typical conductivity and diffusivity values of crystalline rocks, the measurement yields information within less than a metre from the drill hole, when the experiment lasts about 24 hours. We propose the following factors to be taken as basic parameters in the construction of a practical measurement system: the probe length 1.5-2 m, heating power 5-20 Wm -1 , temperature recording with 5-7 sensors placed along the probe, and

Internal Performance Measurement Systems: Problems and Solutions

DEFF Research Database (Denmark)

Jakobsen, Morten; Mitchell, Falconer; Nørreklit, Hanne

2010-01-01

This article pursues two aims: to identify problems and dangers related to the operational use of internal performance measurement systems of the Balanced Scorecard (BSC) type and to provide some guidance on how performance measurement systems may be designed to overcome these problems....... The analysis uses and extends N rreklit's (2000) critique of the BSC by applying the concepts developed therein to contemporary research on the BSC and to the development of practice in performance measurement. The analysis is of relevance for many companies in the Asia-Pacific area as an increasing numbers...

Traffic Management Systems Performance Measurement: Final Report

OpenAIRE

Banks, James H.; Kelly, Gregory

1997-01-01

This report documents a study of performance measurement for Transportation Management Centers (TMCs). Performance measurement requirements were analyzed, data collection and management techniques were investigated, and case study traffic data system improvement plans were prepared for two Caltrans districts.

45 CFR 305.40 - Penalty performance measures and levels.

Science.gov (United States)

2010-10-01

... HUMAN SERVICES PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.40 Penalty performance measures and levels. (a) There are three performance measures for which States must... 45 Public Welfare 2 2010-10-01 2010-10-01 false Penalty performance measures and levels. 305.40...

Measures of Strategic Alliance Performance, Classified and Assessed

DEFF Research Database (Denmark)

Christoffersen, Jeppe; Plenborg, Thomas; Robson, Matthew J.

2014-01-01

Over the last three decades, strategic alliance performance has been an important research topic within the international business and management fields. Researchers have investigated a number of factors explaining performance but often find diverging results. Scholars have suggested that one...... reason may be that different performance measures are used as the dependent variable. But which differences exist and how can they matter? Against this backdrop, the present study makes three main contributions. First, we identify dimensions that illustrate differences and similarities between...... performance measures and provide a simple yet comprehensive classification of the different performance measures used in 167 empirical studies in the literature. Second, we suggest how differences in performance measures may influence construct validity under different circumstances. Third, we show...

Reconsidering the measurement of ancillary service performance.

Science.gov (United States)

Griffin, D T; Rauscher, J A

1987-08-01

Prospective payment reimbursement systems have forced hospitals to review their costs more carefully. The result of the increased emphasis on costs is that many hospitals use costs, rather than margin, to judge the performance of ancillary services. However, arbitrary selection of performance measures for ancillary services can result in managerial decisions contrary to hospital objectives. Managerial accounting systems provide models which assist in the development of performance measures for ancillary services. Selection of appropriate performance measures provides managers with the incentive to pursue goals congruent with those of the hospital overall. This article reviews the design and implementation of managerial accounting systems, and considers the impact of prospective payment systems and proposed changes in capital reimbursement on this process.

Measuring our Universe from Galaxy Redshift Surveys.

Science.gov (United States)

Lahav, Ofer; Suto, Yasushi

2004-01-01

Galaxy redshift surveys have achieved significant progress over the last couple of decades. Those surveys tell us in the most straightforward way what our local Universe looks like. While the galaxy distribution traces the bright side of the Universe, detailed quantitative analyses of the data have even revealed the dark side of the Universe dominated by non-baryonic dark matter as well as more mysterious dark energy (or Einstein's cosmological constant). We describe several methodologies of using galaxy redshift surveys as cosmological probes, and then summarize the recent results from the existing surveys. Finally we present our views on the future of redshift surveys in the era of precision cosmology.

The Use of PCs, Smartphones, and Tablets in a Probability-Based Panel Survey : Effects on Survey Measurement Error

NARCIS (Netherlands)

Lugtig, Peter; Toepoel, Vera

2016-01-01

Respondents in an Internet panel survey can often choose which device they use to complete questionnaires: a traditional PC, laptop, tablet computer, or a smartphone. Because all these devices have different screen sizes and modes of data entry, measurement errors may differ between devices. Using

From mission to measures: performance measure development for a Teen Pregnancy Prevention Program.

Science.gov (United States)

Farb, Amy Feldman; Burrus, Barri; Wallace, Ina F; Wilson, Ellen K; Peele, John E

2014-03-01

The Office of Adolescent Health (OAH) sought to create a comprehensive set of performance measures to capture the performance of the Teen Pregnancy Prevention (TPP) program. This performance measurement system needed to provide measures that could be used internally (by both OAH and the TPP grantees) for management and program improvement as well as externally to communicate the program's progress to other interested stakeholders and Congress. This article describes the selected measures and outlines the considerations behind the TPP measurement development process. Issues faced, challenges encountered, and lessons learned have broad applicability for other federal agencies and, specifically, for TPP programs interested in assessing their own performance and progress. Published by Elsevier Inc.

Measuring our Universe from Galaxy Redshift Surveys

Directory of Open Access Journals (Sweden)

Lahav Ofer

2004-07-01

Full Text Available Galaxy redshift surveys have achieved significant progress over the last couple of decades. Those surveys tell us in the most straightforward way what our local Universe looks like. While the galaxy distribution traces the bright side of the Universe, detailed quantitative analyses of the data have even revealed the dark side of the Universe dominated by non-baryonic dark matter as well as more mysterious dark energy (or Einstein's cosmological constant. We describe several methodologies of using galaxy redshift surveys as cosmological probes, and then summarize the recent results from the existing surveys. Finally we present our views on the future of redshift surveys in the era of precision cosmology.

Should measures of patient experience in primary care be adjusted for case mix? Evidence from the English General Practice Patient Survey.

Science.gov (United States)

Paddison, Charlotte; Elliott, Marc; Parker, Richard; Staetsky, Laura; Lyratzopoulos, Georgios; Campbell, John L; Roland, Martin

2012-08-01

Uncertainties exist about when and how best to adjust performance measures for case mix. Our aims are to quantify the impact of case-mix adjustment on practice-level scores in a national survey of patient experience, to identify why and when it may be useful to adjust for case mix, and to discuss unresolved policy issues regarding the use of case-mix adjustment in performance measurement in health care. Secondary analysis of the 2009 English General Practice Patient Survey. Responses from 2 163 456 patients registered with 8267 primary care practices. Linear mixed effects models were used with practice included as a random effect and five case-mix variables (gender, age, race/ethnicity, deprivation, and self-reported health) as fixed effects. Primary outcome was the impact of case-mix adjustment on practice-level means (adjusted minus unadjusted) and changes in practice percentile ranks for questions measuring patient experience in three domains of primary care: access; interpersonal care; anticipatory care planning, and overall satisfaction with primary care services. Depending on the survey measure selected, case-mix adjustment changed the rank of between 0.4% and 29.8% of practices by more than 10 percentile points. Adjusting for case-mix resulted in large increases in score for a small number of practices and small decreases in score for a larger number of practices. Practices with younger patients, more ethnic minority patients and patients living in more socio-economically deprived areas were more likely to gain from case-mix adjustment. Age and race/ethnicity were the most influential adjustors. While its effect is modest for most practices, case-mix adjustment corrects significant underestimation of scores for a small proportion of practices serving vulnerable patients and may reduce the risk that providers would 'cream-skim' by not enrolling patients from vulnerable socio-demographic groups.

A survey report: how hospitals measure liquidity.

Science.gov (United States)

Cleverley, W O; Massar, G S

1983-11-01

Liquidity is an important financial concept that is widely understood although not authoritatively defined. In many situations the actual assessment of liquidity is based on the relationship of current assets and current liabilities. Nationally, a decline in traditional measures of liquidity such as current and quick ratios has occurred for both general industry and the hospital industry. There are a variety of possible explanations for this trend, but one of special interest in this article was the effect of financial reporting practices. A recent Principles & Practices Board survey of Financial Analysis Service subscribers indicated that there is a potential for underreporting working capital, (current assets less current liabilities), in the hospital industry. However, this does not necessarily imply that the recent decline in liquidity measures is in any way due to reporting practices. No information about changes in reporting practices was obtained in this study. Finally, the results of the study do suggest that examination of more than one liquidity indicator is useful. Specifically, restricting attention to just the current ratio could be misleading. In this vein, it is interesting to note that six measures of liquidity are used in the FAS. All may provide insight into an accurate assessment of liquidity.

MEASURING PERFORMANCE IN ORGANIZATIONS FROM MULTI-DIMENSIONAL PERSPECTIVE

Directory of Open Access Journals (Sweden)

ȘTEFĂNESCU CRISTIAN

2017-08-01

Full Text Available In turbulent financial and economic present conditions a major challenge for the general management of organizations and in particular for the strategic human resources management is to establish a clear, coherent and consistent framework in terms of measuring organizational performance and economic efficiency. This paper aims to conduct an exploratory research of literature concerning measuring organizational performance. Based on the results of research the paper proposes a multi-dimensional model for measuring organizational performance providing a mechanism that will allow quantification of performance based on selected criteria. The model will attempt to eliminate inconsistencies and incongruities of organizational effectiveness models developed by specialists from organization theory area, performance measurement models developed by specialists from accounting management area and models of measuring the efficiency and effectiveness developed by specialists from strategic management and entrepreneurship areas.

The (mis)Measurement of M&A Performance

DEFF Research Database (Denmark)

Meglio, Olimpia; Risberg, Annette

2011-01-01

This paper seeks to further the understanding of the variety of meanings M&A scholars attach to the label “M&A performance” by providing an alternative way to interpret the claimed inconsistency of M&A research findings. While many scholars contend that the problem stems from the multiplicity of M......&A performance measures, we believe the problem rests in trying to compare different measures as if they were measuring the same feature of the organization. Through our narrative review of empirical research we analyze factors shaping the M&A – as well as the organizational – performance measurement process....... The conclusion is that it is not possible to talk about M&A performance as if it was a universal construct....

THE FMOS-COSMOS SURVEY OF STAR-FORMING GALAXIES AT z ∼ 1.6. III. SURVEY DESIGN, PERFORMANCE, AND SAMPLE CHARACTERISTICS

Energy Technology Data Exchange (ETDEWEB)

Silverman, J. D.; Sugiyama, N. [Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo Institutes for Advanced Study, The University of Tokyo, Kashiwa, 277-8583 (Japan); Kashino, D. [Division of Particle and Astrophysical Science, Graduate School of Science, Nagoya University, Nagoya, 464-8602 (Japan); Sanders, D.; Zahid, J.; Kewley, L. J.; Chu, J.; Hasinger, G. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI, 96822 (United States); Kartaltepe, J. S. [National Optical Astronomy Observatory, 950 N. Cherry Ave., Tucson, AZ, 85719 (United States); Arimoto, N. [Subaru Telescope, 650 North A’ohoku Place, Hilo, Hawaii, 96720 (United States); Renzini, A. [Instituto Nazionale de Astrofisica, Osservatorio Astronomico di Padova, vicolo dell’Osservatorio 5, I-35122, Padova, Italy, EU (Italy); Rodighiero, G.; Baronchelli, I. [Dipartimento di Fisica e Astronomia, Universita di Padova, vicolo Osservatorio, 3, I-35122, Padova (Italy); Daddi, E.; Juneau, S. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, Irfu/Service d’Astrophysique, CEA Saclay (France); Nagao, T. [Graduate School of Science and Engineering, Ehime University, 2-5 Bunkyo-cho, Matsuyama 790-8577 (Japan); Lilly, S. J.; Carollo, C. M. [Institute of Astronomy, ETH Zürich, CH-8093, Zürich (Switzerland); Capak, P. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Ilbert, O., E-mail: john.silverman@ipmu.jp [Aix Marseille Université, CNRS, LAM (Laboratoire d’Astrophysique de Marseille) UMR 7326, F-13388, Marseille (France); and others

2015-09-15

We present a spectroscopic survey of galaxies in the COSMOS field using the Fiber Multi-object Spectrograph (FMOS), a near-infrared instrument on the Subaru Telescope. Our survey is specifically designed to detect the Hα emission line that falls within the H-band (1.6–1.8 μm) spectroscopic window from star-forming galaxies with 1.4 < z < 1.7 and M{sub stellar} ≳ 10{sup 10} M{sub ⊙}. With the high multiplex capability of FMOS, it is now feasible to construct samples of over 1000 galaxies having spectroscopic redshifts at epochs that were previously challenging. The high-resolution mode (R ∼ 2600) effectively separates Hα and [N ii]λ6585, thus enabling studies of the gas-phase metallicity and photoionization state of the interstellar medium. The primary aim of our program is to establish how star formation depends on stellar mass and environment, both recognized as drivers of galaxy evolution at lower redshifts. In addition to the main galaxy sample, our target selection places priority on those detected in the far-infrared by Herschel/PACS to assess the level of obscured star formation and investigate, in detail, outliers from the star formation rate (SFR)—stellar mass relation. Galaxies with Hα detections are followed up with FMOS observations at shorter wavelengths using the J-long (1.11–1.35 μm) grating to detect Hβ and [O iii]λ5008 which provides an assessment of the extinction required to measure SFRs not hampered by dust, and an indication of embedded active galactic nuclei. With 460 redshifts measured from 1153 spectra, we assess the performance of the instrument with respect to achieving our goals, discuss inherent biases in the sample, and detail the emission-line properties. Our higher-level data products, including catalogs and spectra, are available to the community.

Strategic performance management: development of a performance measurement system at the Mayo Clinic.

Science.gov (United States)

Curtright, J W; Stolp-Smith, S C; Edell, E S

2000-01-01

Managing and measuring performance become exceedingly complex as healthcare institutions evolve into integrated health systems comprised of hospitals, outpatient clinics and surgery centers, nursing homes, and home health services. Leaders of integrated health systems need to develop a methodology and system that align organizational strategies with performance measurement and management. To meet this end, multiple healthcare organizations embrace the performance-indicators reporting system known as a "balanced scorecard" or a "dashboard report." This discrete set of macrolevel indicators gives senior management a fast but comprehensive glimpse of the organization's performance in meeting its quality, operational, and financial goals. The leadership of outpatient operations for Mayo Clinic in Rochester, Minnesota built on this concept by creating a performance management and measurement system that monitors and reports how well the organization achieves its performance goals. Internal stakeholders identified metrics to measure performance in each key category. Through these metrics, the organization links Mayo Clinic's vision, primary value, core principles, and day-to-day operations by monitoring key performance indicators on a weekly, monthly, or quarterly basis.

Ambulatory care registered nurse performance measurement.

Science.gov (United States)

Swan, Beth Ann; Haas, Sheila A; Chow, Marilyn

2010-01-01

On March 1-2, 2010, a state-of-the-science invitational conference titled "Ambulatory Care Registered Nurse Performance Measurement" was held to focus on measuring quality at the RN provider level in ambulatory care. The conference was devoted to ambulatory care RN performance measurement and quality of health care. The specific emphasis was on formulating a research agenda and developing a strategy to study the testable components of the RN role related to care coordination and care transitions, improving patient outcomes, decreasing health care costs, and promoting sustainable system change. The objectives were achieved through presentations and discussion among expert inter-professional participants from nursing, public health, managed care, research, practice, and policy. Conference speakers identified priority areas for a unified practice, policy, and research agenda. Crucial elements of the strategic dialogue focused on issues and implications for nursing and inter-professional practice, quality, and pay-for-performance.

Business process performance measurement: a structured literature review of indicators, measures and metrics.

Science.gov (United States)

Van Looy, Amy; Shafagatova, Aygun

2016-01-01

Measuring the performance of business processes has become a central issue in both academia and business, since organizations are challenged to achieve effective and efficient results. Applying performance measurement models to this purpose ensures alignment with a business strategy, which implies that the choice of performance indicators is organization-dependent. Nonetheless, such measurement models generally suffer from a lack of guidance regarding the performance indicators that exist and how they can be concretized in practice. To fill this gap, we conducted a structured literature review to find patterns or trends in the research on business process performance measurement. The study also documents an extended list of 140 process-related performance indicators in a systematic manner by further categorizing them into 11 performance perspectives in order to gain a holistic view. Managers and scholars can consult the provided list to choose the indicators that are of interest to them, considering each perspective. The structured literature review concludes with avenues for further research.

Urinary bisphenol A and obesity in adults: results from the Canadian Health Measures Survey

Directory of Open Access Journals (Sweden)

Minh T. Do

2017-12-01

Full Text Available Introduction: Exposure to bisphenol A (BPA has been shown to affect lipid metabolism and promote weight gain in animal studies. Recent epidemiological studies also support a link between BPA and obesity in human populations, although many were limited to a single adiposity measure or have not considered potential confounding by dietary factors. The purpose of this study is to examine associations between urinary BPA and adiposity measures in a nationally representative sample of Canadian adults. Methods: We performed analyses using biomonitoring and directly measured anthropometric data from 4733 adults aged 18 to 79 years in the Canadian Health Measures Survey (2007–2011. We used multinomial and binary logistic regression models to estimate associations of urinary BPA with body mass index (BMI categories (overweight vs. under/normal weight; obesity vs. under/normal weight and elevated waist circumference (males: ≥ 102 cm; females: ≥ 88 cm, respectively, while controlling for potential confounders. Linear regression analyses were also performed to assess associations between urinary BPA and continuous BMI and waist circumference measures. Results: Urinary BPA was positively associated with BMI-defined obesity, with an odds ratio of 1.54 (95% confidence interval [CI]: 1.002–2.37 in the highest (vs. lowest BPA quartile (test for trend, p = .041. Urinary BPA was not associated with elevated waist circumference defined using standard cut-offs. Additionally, each natural-log unit increase in urinary BPA concentration was associated with a 0.33 kg/m2 (95% CI: 0.10–0.57 increase in BMI and a 1.00 cm (95% CI: 0.34–1.65 increase in waist circumference. Conclusion: Our study contributes to the growing body of evidence that BPA is positively associated with obesity. Prospective studies with repeated measures are needed to address temporality and improve exposure classification.

Validation of the Child HCAHPS survey to measure pediatric inpatient experience of care in Flanders.

Science.gov (United States)

Bruyneel, Luk; Coeckelberghs, Ellen; Buyse, Gunnar; Casteels, Kristina; Lommers, Barbara; Vandersmissen, Jo; Van Eldere, Johan; Van Geet, Chris; Vanhaecht, Kris

2017-07-01

The recently developed Child HCAHPS provides a standard to measure US hospitals' performance on pediatric inpatient experiences of care. We field-tested Child HCAHPS in Belgium to instigate international comparison. In the development stage, forward/backward translation was conducted and patients assessed content validity index as excellent. The draft Flemish Child HCAHPS included 63 items: 38 items for five topics hypothesized to be similar to those proposed in the US (communication with parent, communication with child, attention to safety and comfort, hospital environment, and global rating), 10 screeners, a 14-item demographic and descriptive section, and one open-ended item. A 6-week pilot test was subsequently performed in three pediatric wards (general ward, hematology and oncology ward, infant and toddler ward) at a JCI-accredited university hospital. An overall response rate of 90.99% (303/333) was achieved and was consistent across wards. Confirmatory factor analysis largely confirmed the configuration of the proposed composites. Composite and single-item measures related well to patients' global rating of the hospital. Interpretation of different patient experiences across types of wards merits further investigation. Child HCAHPS provides an opportunity for systematic and cross-national assessment of pediatric inpatient experiences. Sharing and implementing international best practices are the next logical step. What is Known: • Patient experience surveys are increasingly used to reflect on the quality, safety, and centeredness of patient care. • While adult inpatient experience surveys are routinely used across countries around the world, the measurement of pediatric inpatient experiences is a young field of research that is essential to reflect on family-centered care. What is New: • We demonstrate that the US-developed Child HCAHPS provides an opportunity for international benchmarking of pediatric inpatient experiences with care through parents

Synthesis of work-zone performance measures.

Science.gov (United States)

2013-09-01

The main objective of this synthesis was to identify and summarize how agencies collect, analyze, and report different work-zone : traffic-performance measures, which include exposure, mobility, and safety measures. The researchers also examined comm...

Measuring coverage in MNCH: tracking progress in health for women and children using DHS and MICS household surveys.

Directory of Open Access Journals (Sweden)

Attila Hancioglu

Full Text Available Household surveys are the primary data source of coverage indicators for children and women for most developing countries. Most of this information is generated by two global household survey programmes-the USAID-supported Demographic and Health Surveys (DHS and the UNICEF-supported Multiple Indicator Cluster Surveys (MICS. In this review, we provide an overview of these two programmes, which cover a wide range of child and maternal health topics and provide estimates of many Millennium Development Goal indicators, as well as estimates of the indicators for the Countdown to 2015 initiative and the Commission on Information and Accountability for Women's and Children's Health. MICS and DHS collaborate closely and work through interagency processes to ensure that survey tools are harmonized and comparable as far as possible, but we highlight differences between DHS and MICS in the population covered and the reference periods used to measure coverage. These differences need to be considered when comparing estimates of reproductive, maternal, newborn, and child health indicators across countries and over time and we discuss the implications of these differences for coverage measurement. Finally, we discuss the need for survey planners and consumers of survey results to understand the strengths, limitations, and constraints of coverage measurements generated through household surveys, and address some technical issues surrounding sampling and quality control. We conclude that, although much effort has been made to improve coverage measurement in household surveys, continuing efforts are needed, including further research to improve and refine survey methods and analytical techniques.

Policy interventions related to medicines: Survey of measures taken in European countries during 2010-2015.

Science.gov (United States)

Vogler, Sabine; Zimmermann, Nina; de Joncheere, Kees

2016-12-01

Policy-makers can use a menu of pharmaceutical policy options. This study aimed to survey these measures that were implemented in European countries between 2010 and 2015. We did bi-annual surveys with competent authorities of the Pharmaceutical Pricing and Reimbursement Information network. Additionally, we consulted posters produced by members of this network as well as further published literature. Information on 32 European countries (all European Union Member States excluding Luxembourg; Iceland, Norway, Serbia, Switzerland, Turkey) was included. 557 measures were reported between January 2010 and December 2015. The most frequently mentioned measure was price reductions and price freezes, followed by changes in patient co-payments, modifications related to the reimbursement lists and changes in distribution remuneration. Most policy measures were identified in Portugal, Greece, Belgium, France, the Czech Republic, Iceland, Spain and Germany. 22% of the measures surveyed could be classified as austerity. Countries that were strongly hit by the financial crisis implemented most policy changes, usually aiming to generate savings and briefly after the emergence of the crisis. Improvements in the economic situation tended to lead to an easing of austerity measures. Countries also implemented policies that aimed to enhance enforcement of existing measures and increase efficiency. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Arduino based radiation survey meter

International Nuclear Information System (INIS)

Rahman, Nur Aira Abd; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee; Muzakkir, Amir

2016-01-01

This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr −1 ). Conversion factor (CF) value for conversion of CPM to μSvhr −1 determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr

Strategic planning and performance measurement using Fuzzy DEMATEL: A case study of Iran Kaolin and Barite company

Directory of Open Access Journals (Sweden)

Abolfazl Danaei

2013-10-01

Full Text Available This paper presents an empirical investigation to measure the performance of a mining firm in province of Semnan, Iran based on fuzzy fuzzy Decision Making Trial and Evaluation Laboratory (DEMATEL technique. The proposed study of this paper uses strength, weakness, opportunity and threat (SWOT technique to analyze the firm and using DEMATEL rank various items based on their relative importance. Based on the results of our survey, cost reduction and increase investment in mining sector are the most important components of this survey. The study also compares the results with similar study, which has recently been accomplished and we believe the proposed model is capable of detecting possible threats and helping us provide possible actions.

Evaluation of emergency department performance - a systematic review on recommended performance and quality-in-care measures.

Science.gov (United States)

Sørup, Christian Michel; Jacobsen, Peter; Forberg, Jakob Lundager

2013-08-09

Evaluation of emergency department (ED) performance remains a difficult task due to the lack of consensus on performance measures that reflects high quality, efficiency, and sustainability. To describe, map, and critically evaluate which performance measures that the published literature regard as being most relevant in assessing overall ED performance. Following the PRISMA guidelines, a systematic literature review of review articles reporting accentuated ED performance measures was conducted in the databases of PubMed, Cochrane Library, and Web of Science. Study eligibility criteria includes: 1) the main purpose was to discuss, analyse, or promote performance measures best reflecting ED performance, 2) the article was a review article, and 3) the article reported macro-level performance measures, thus reflecting an overall departmental performance level. A number of articles addresses this study's objective (n = 14 of 46 unique hits). Time intervals and patient-related measures were dominant in the identified performance measures in review articles from US, UK, Sweden and Canada. Length of stay (LOS), time between patient arrival to initial clinical assessment, and time between patient arrivals to admission were highlighted by the majority of articles. Concurrently, "patients left without being seen" (LWBS), unplanned re-attendance within a maximum of 72 hours, mortality/morbidity, and number of unintended incidents were the most highlighted performance measures that related directly to the patient. Performance measures related to employees were only stated in two of the 14 included articles. A total of 55 ED performance measures were identified. ED time intervals were the most recommended performance measures followed by patient centeredness and safety performance measures. ED employee related performance measures were rarely mentioned in the investigated literature. The study's results allow for advancement towards improved performance measurement and

English Value-Added Measures: Examining the Limitations of School Performance Measurement

Science.gov (United States)

Perry, Thomas

2016-01-01

Value-added "Progress" measures are to be introduced for all English schools in 2016 as "headline" measures of school performance. This move comes despite research highlighting high levels of instability in value-added measures and concerns about the omission of contextual variables in the planned measure. This article studies…

From performance measurement to learning

DEFF Research Database (Denmark)

Lewis, Jenny; Triantafillou, Peter

2012-01-01

Over the last few decades accountability has accommodated an increasing number of different political, legal and administrative goals. This article focuses on the administrative aspect of accountability and explores the potential perils of a shift from performance measurement to learning. While...... overload. We conclude with some comments on limiting the undesirable consequences of such a move. Points for practitioners Public administrators need to identify and weigh the (human, political and economic) benefits and costs of accountability regimes. While output-focused performance measurement regimes...... to comply with accountability requirements, because of the first point. Third, the costs of compliance are likely to increase because learning requires more participation and dialogue. Fourth, accountability as learning may generate a ‘change for the sake of change’ mentality, creating further government...

Measurement of environmental impacts of telework adoption amidst change in complex organizations. AT and T survey methodology and results

Energy Technology Data Exchange (ETDEWEB)

Atkyns, Robert; Blazek, Michele; Roitz, Joseph [AT and T, 179 Bothin Road, 94930 Fairfax, CA (United States)

2002-10-01

Telecommuting practices and their environmental and organizational performance impacts have stimulated research across academic disciplines. Although telecommuting trends and impact projections are reported, few true longitudinal studies involving large organizations have been conducted. Published studies typically lack the research design elements to control a major confounding variable: rapid and widespread organizational change. Yet social science 'Best Practices' and market research industry quality control procedures exist that can help manage organizational change effects and other common sources of measurement error. In 1992, AT and T established a formal, corporate-wide telecommuting policy. A research and statistical modeling initiative was implemented to measure how flexible work arrangements reduce automotive emissions. Annual employee surveys were begun in 1994. As telecommuting benefits have been increasingly recognized within AT and T, the essential construct has been redefined as 'telework.' The survey's scope has expanded to address broader organization issues and provide guidance to multiple internal constituencies. This paper focuses upon the procedures used to reliably measure the adoption of telework practices and model their environmental impact, and contrasts those procedures with other, less reliable methodologies.

Performance Measure as Feedback Variable in Image Processing

Directory of Open Access Journals (Sweden)

Ristić Danijela

2006-01-01

Full Text Available This paper extends the view of image processing performance measure presenting the use of this measure as an actual value in a feedback structure. The idea behind is that the control loop, which is built in that way, drives the actual feedback value to a given set point. Since the performance measure depends explicitly on the application, the inclusion of feedback structures and choice of appropriate feedback variables are presented on example of optical character recognition in industrial application. Metrics for quantification of performance at different image processing levels are discussed. The issues that those metrics should address from both image processing and control point of view are considered. The performance measures of individual processing algorithms that form a character recognition system are determined with respect to the overall system performance.

Measures of large-scale structure in the CfA redshift survey slices

International Nuclear Information System (INIS)

De Lapparent, V.; Geller, M.J.; Huchra, J.P.

1991-01-01

Variations of the counts-in-cells with cell size are used here to define two statistical measures of large-scale clustering in three 6 deg slices of the CfA redshift survey. A percolation criterion is used to estimate the filling factor which measures the fraction of the total volume in the survey occupied by the large-scale structures. For the full 18 deg slice of the CfA redshift survey, f is about 0.25 + or - 0.05. After removing groups with more than five members from two of the slices, variations of the counts in occupied cells with cell size have a power-law behavior with a slope beta about 2.2 on scales from 1-10/h Mpc. Application of both this statistic and the percolation analysis to simulations suggests that a network of two-dimensional structures is a better description of the geometry of the clustering in the CfA slices than a network of one-dimensional structures. Counts-in-cells are also used to estimate at 0.3 galaxy h-squared/Mpc the average galaxy surface density in sheets like the Great Wall. 46 refs

AAN Epilepsy Quality Measures in clinical practice: a survey of neurologists.

Science.gov (United States)

Wasade, Vibhangini S; Spanaki, Marianna; Iyengar, Revathi; Barkley, Gregory L; Schultz, Lonni

2012-08-01

Epilepsy Quality Measures (EQM) were developed by the American Academy of Neurology (AAN) to convey standardization and eliminate gaps and variations in the delivery of epilepsy care (Fountain et al., 2011 [1]). The aim of this study was to identify adherence to these measures and other emerging practice standards in epilepsy care. A 15-item survey was mailed to neurologists in Michigan, USA, inquiring about their practice patterns in relation to EQM. One hundred thirteen of the 792 surveyed Michigan Neurologists responded (14%). The majority (83% to 94%) addressed seizure type and frequency, reviewed EEG and MRI, and provided pregnancy counseling to women of childbearing potential. Our survey identified gaps in practice patterns such as counseling about antiepileptic drug (AED) side effects and knowledge about referral for surgical therapy of intractable epilepsy. Statistical significance in the responses on the AAN EQM was noted in relation to number of years in practice, number of epilepsy patients seen, and additional fellowship training in epilepsy. Practice patterns assessment in relation to other comorbidities revealed that although bone health and sudden unexplained death in epilepsy are addressed mainly in patients at risk, depression is infrequently discussed. The findings in this study indicate that additional educational efforts are needed to increase awareness and to improve quality of epilepsy care at various points of health care delivery. Copyright © 2012 Elsevier Inc. All rights reserved.

Work zone performance measures pilot test.

Science.gov (United States)

2011-04-01

Currently, a well-defined and validated set of metrics to use in monitoring work zone performance do not : exist. This pilot test was conducted to assist state DOTs in identifying what work zone performance : measures can and should be targeted, what...

Department of Defense Physical Strength and Job Performance Survey: Report on the Ability of First-Term Enlisted Personnel to Perform Physically Demanding Work

National Research Council Canada - National Science Library

Cooper, Barrie

2002-01-01

... to perform physically demanding tasks. Within each service, 10 occupational specialties with moderate to high strength requirements were identified as the target populations for the DOD Physical Strength mid Job Performance Survey...

Drivers of Performance Measurement Use: Empirical Evidence from Serbia

Directory of Open Access Journals (Sweden)

Miloš Milosavljević

2016-05-01

Full Text Available In the last decades, the interest of academics and practitioners for the efficiency of performance measurement system use has grown rapidly. The aim of this paper is to examine, articulate and test the relationship between maturity of performance measurement systems, strategic compliance of performance measurement and managerial orientation, on one side, and the portfolio of performance measurement uses, on the other. Data were collected from 86 Serbian companies. The results indicate that the most influential factor for diversified use of performance measurement is the maturity of the system. The paper also discusses theoretical contributions, implications for managers and scholars, and recommendations for decision-makers.

Fault Location Based on Synchronized Measurements: A Comprehensive Survey

Science.gov (United States)

Al-Mohammed, A. H.; Abido, M. A.

2014-01-01

This paper presents a comprehensive survey on transmission and distribution fault location algorithms that utilize synchronized measurements. Algorithms based on two-end synchronized measurements and fault location algorithms on three-terminal and multiterminal lines are reviewed. Series capacitors equipped with metal oxide varistors (MOVs), when set on a transmission line, create certain problems for line fault locators and, therefore, fault location on series-compensated lines is discussed. The paper reports the work carried out on adaptive fault location algorithms aiming at achieving better fault location accuracy. Work associated with fault location on power system networks, although limited, is also summarized. Additionally, the nonstandard high-frequency-related fault location techniques based on wavelet transform are discussed. Finally, the paper highlights the area for future research. PMID:24701191

Fault Location Based on Synchronized Measurements: A Comprehensive Survey

Directory of Open Access Journals (Sweden)

A. H. Al-Mohammed

2014-01-01

Full Text Available This paper presents a comprehensive survey on transmission and distribution fault location algorithms that utilize synchronized measurements. Algorithms based on two-end synchronized measurements and fault location algorithms on three-terminal and multiterminal lines are reviewed. Series capacitors equipped with metal oxide varistors (MOVs, when set on a transmission line, create certain problems for line fault locators and, therefore, fault location on series-compensated lines is discussed. The paper reports the work carried out on adaptive fault location algorithms aiming at achieving better fault location accuracy. Work associated with fault location on power system networks, although limited, is also summarized. Additionally, the nonstandard high-frequency-related fault location techniques based on wavelet transform are discussed. Finally, the paper highlights the area for future research.

Business sustainability performance measurement: Eco-ratio analysis

Directory of Open Access Journals (Sweden)

Collins C. Ngwakwe

2016-12-01

Full Text Available Eco-aware customers and stakeholders are demanding for a measurement that links environmental performance with other business operations. To bridge this seemingly measurement gap, this paper suggests ‘Eco-Ratio Analysis’ and proposes an approach for conducting eco-ratio analysis. It is argued that since accounting ratios function as a tool for evaluating corporate financial viability by management and investors, eco-ratio analysis should be brought to the fore to provide a succinct measurement about the linkage between environmental performance and conventional business performance. It is hoped that this suggestion will usher in a nuance debate and approach in the teaching, research and practice of environmental management and sustainability accounting

Influence of Spherical Radiation Pattern Measurement Uncertainty on Handset Performance Measures

DEFF Research Database (Denmark)

Nielsen, Jesper Ødum; Pedersen, Gert Frølund

2005-01-01

system that may introduce errors in standardized performance measurements. Radiation patterns of six handsets have been measured while they were mounted at various offsets from the reference position defined by the Cellular Telecommunications & Internet Association (CTIA) certification. The change...... in the performance measures are investigated for both the GSM-900 and the GSM-1800 band. Despite the deliberately large deviations from the reference position, the changes in TRP and TIS are generally within ±0.5 dB with a maximum of about 1.4 dB. For the MEG values the results depend on the orientation...

Survey results of output measurements in diagnostic X ray equipments using glass dosimeter and the questionnaire. Aichi association of radiological technologists 50 year anniversary memorial work

International Nuclear Information System (INIS)

Kondo, Yuji; Hirofuji, Yoshiaki; Saiga, Osamu; Ishibashi, Kazuto

2003-01-01

The Aichi Association of Radiological Technologists executed the survey according to the task of radiation control in Aichi prefecture. The survey investigated the number of clinics/hospitals who own radiation dosimeters. The association also measured outputs using glass dosimeter (GD-450) manufactured by Chiyoda Technical in diagnostic X ray. The purpose and significance of the survey are: to illustrate that the radiation control task is not involved as routine maintenance work, to examine why the task is not routinely performed, to investigate the number of clinics/hospitals who own diagnostic X ray radiation dosimeters, to inform that the use of dosimeter is essential to achieve accurate measurement for exposed dose, and to motivate the significance of radiation control in routine work. The result of the survey clearly indicated the necessity of radiation control, and suggested the information needed for the Aichi Association of Radiological Technologists to determine the guideline for the medical radiation exposed dose. (author)

A Study on Relationships between Functional Performance and Task Performance Measure through Experiments in NPP MCR

International Nuclear Information System (INIS)

Jang, In Seok; Seong, Poong Hyun; Park, Jin Kyun

2011-01-01

Further improvements in levels of organization, management, man-machine interfaces, education, training, etc. are required, if high operating reliability of operators in huge and complex plants such as chemical plants and electrical power generating plants is to be maintained. Improvement requires good understanding of operators' behavior, including defining what is good performance for operators, especially in emergency situations. Human performance measures, therefore, are important to enhance performance and to reduce the probability of incidents and accidents in Nuclear Power Plants (NPPs). Operators' performance measures are used for multi-objectives such as control room design, human system interface evaluation, training, procedure and so on. There are two kinds of representative methods to measure operators' performance. These methods are now known as the functional performance measure and task performance measure. Functional performance measures are basically based on the plant process parameters. Functional performance measures indicate how well the operators controlled selected critical parameters. The parameters selected in this paper are derived from the four Critical Safety Functions (CSFs) identified in the emergency operating procedures such as achievement of subcriticality, maintenance of core cooling, maintenance of heat sink and maintenance of containment integrity. Task performance measures are based on the task analysis. Task analysis is to determine the tasks required and how operators are performed. In this paper, task analysis is done with ideal path for an accident completed by experts and Emergency Operation Procedure (EOP). However, most literatures related to operators' performance have been using one of these measures and there is no research to find out the relationships between two measures. In this paper, the relationships between functional performance measure and task performance measure are investigated using experiments. Shortly

Quality assurance of external exposure measurement for national survey of environmental natural radioactive level

International Nuclear Information System (INIS)

Yue Qingyu

1995-01-01

This paper summarizes the quality assurance work of external exposure measurement for national survey of environmental natural radioactive level. It mainly introduces instrumentation used in external exposure measurement and its properties, the measurement results of three times of national in-site intercomparison, and in-site sample check results of measurement results from 29 provinces, cities and autonomous regions and Wuhan, Baotou cities

Multi-component wind measurements of wind turbine wakes performed with three LiDARs

Science.gov (United States)

Iungo, G. V.; Wu, Y.-T.; Porté-Agel, F.

2012-04-01

Field measurements of the wake flow produced from the interaction between atmospheric boundary layer and a wind turbine are performed with three wind LiDARs. The tested wind turbine is a 2 MW Enercon E-70 located in Collonges, Switzerland. First, accuracy of mean values and frequency resolution of the wind measurements are surveyed as a function of the number of laser rays emitted for each measurement. Indeed, measurements performed with one single ray allow maximizing sampling frequency, thus characterizing wake turbulence. On the other hand, if the number of emitted rays is increased accuracy of mean wind is increased due to the longer sampling period. Subsequently, two-dimensional measurements with a single LiDAR are carried out over vertical sections of the wind turbine wake and mean wake flow is obtained by averaging 2D measurements consecutively performed. The high spatial resolution of the used LiDAR allows characterizing in details velocity defect present in the central part of the wake and its downstream recovery. Single LiDAR measurements are also performed by staring the laser beam at fixed directions for a sampling period of about ten minutes and maximizing the sampling frequency in order to characterize wake turbulence. From these tests wind fluctuation peaks are detected in the wind turbine wake at blade top-tip height for different downstream locations. The magnitude of these turbulence peaks is generally reduced by moving downstream. This increased turbulence level at blade top-tip height observed for a real wind turbine has been already detected from previous wind tunnel tests and Large Eddy simulations, thus confirming the presence of a source of dangerous fatigue loads for following wind turbines within a wind farm. Furthermore, the proper characterization of wind fluctuations through LiDAR measurements is proved by the detection of the inertial subrange from spectral analysis of these velocity signals. Finally, simultaneous measurements with two

The relationships between common measures of glucose meter performance.

Science.gov (United States)

Wilmoth, Daniel R

2012-09-01

Glucose meter performance is commonly measured in several different ways, including the relative bias and coefficient of variation (CV), the total error, the mean absolute relative deviation (MARD), and the size of the interval around the reference value that would be necessary to contain a meter measurement at a specified probability. This fourth measure is commonly expressed as a proportion of the reference value and will be referred to as the necessary relative deviation. A deeper understanding of the relationships between these measures may aid health care providers, patients, and regulators in comparing meter performances when different measures are used. The relationships between common measures of glucose meter performance were derived mathematically. Equations are presented for calculating the total error, MARD, and necessary relative deviation using the reference value, relative bias, and CV when glucose meter measurements are normally distributed. When measurements are also unbiased, the CV, total error, MARD, and necessary relative deviation are linearly related and are therefore equivalent measures of meter performance. The relative bias and CV provide more information about meter performance than the other measures considered but may be difficult for some audiences to interpret. Reporting meter performance in multiple ways may facilitate the informed selection of blood glucose meters. © 2012 Diabetes Technology Society.

Arduino based radiation survey meter

Energy Technology Data Exchange (ETDEWEB)

Rahman, Nur Aira Abd, E-mail: nur-aira@nm.gov.my; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee [Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Muzakkir, Amir [Sinaran Utama Teknologi Sdn Bhd, 43650, Bandar Baru Bangi, Selangor (Malaysia)

2016-01-22

This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr{sup −1}). Conversion factor (CF) value for conversion of CPM to μSvhr{sup −1} determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr.

Facilities projects performance measurement system

International Nuclear Information System (INIS)

Erben, J.F.

1979-01-01

The two DOE-owned facilities at Hanford, the Fuels and Materials Examination Facility (FMEF), and the Fusion Materials Irradiation Test Facility (FMIT), are described. The performance measurement systems used at these two facilities are next described

Do 360-degree feedback survey results relate to patient satisfaction measures?

Science.gov (United States)

Hageman, Michiel G J S; Ring, David C; Gregory, Paul J; Rubash, Harry E; Harmon, Larry

2015-05-01

other PULSE 360 variables were correlated with CG-CAHPS ratings, but none were retained in the linear models post stepwise regression. The relationship between Quality PULSE 360 feedback scores and measures of patient satisfaction reaffirm that feedback from work team members may provide helpful information into how patients may be perceiving their physicians' behavior and vice versa. Furthermore, the findings provide tentative support for the use of team-based feedback to improve the quality of relationships with both coworkers and patients. The 360-degree survey process may offer an effective tool for physicians to obtain feedback about behavior that could directly impact practice reimbursement and reputation or potentially be used for bonuses to incentivize better team professionalism and patient satisfaction, ie, "pay-for-professionalism." Further research is needed to expand on this line of inquiry, determine which interventions can improve 360-degree and patient satisfaction scores, and explain the shared variance in physician performance that is captured in the perceptions of patients and coworkers.

Telerobotic system performance measurement - Motivation and methods

Science.gov (United States)

Kondraske, George V.; Khoury, George J.

1992-01-01

A systems performance-based strategy for modeling and conducting experiments relevant to the design and performance characterization of telerobotic systems is described. A developmental testbed consisting of a distributed telerobotics network and initial efforts to implement the strategy described is presented. Consideration is given to the general systems performance theory (GSPT) to tackle human performance problems as a basis for: measurement of overall telerobotic system (TRS) performance; task decomposition; development of a generic TRS model; and the characterization of performance of subsystems comprising the generic model. GSPT employs a resource construct to model performance and resource economic principles to govern the interface of systems to tasks. It provides a comprehensive modeling/measurement strategy applicable to complex systems including both human and artificial components. Application is presented within the framework of a distributed telerobotics network as a testbed. Insight into the design of test protocols which elicit application-independent data is described.

Combining 137Cs and topographic surveys for measuring soil erosion/deposition patterns in a rapidly accreting area

International Nuclear Information System (INIS)

Ritchie, J.C.

2000-01-01

Narrow, stiff grass hedges are biological barriers designed to slow runoff and capture soils carried in runoff water. This study was designed to measure quantitatively the deposition of soil up slope of a narrow, stiff grass hedge using topographic and 137 Cs surveys. Topographic surveys made in 1991, 1995, and 1998 measured 1 to 2 cm yr -1 of recent sediment deposited up slope of the grass hedge. 137 Cs analyses of soil samples were used to determine the medium-term (45 years) soil redistribution patterns. Erosion rates and patterns determined using 137 Cs measured medium-term erosion near the hedge do not reflect the recent deposition patterns near the grass hedge measured by topographic surveys. Using the combination of topographic and 137 Cs surveys allows a better understanding of the role of grass hedges as barriers for capturing eroding soils and suggest that the recent deposition is associated with the grass hedge but that there is still a net loss of soil near the hedge position over the past 45 years. (author)

Survey of the Applications and Uses of Unobtrusive Measures in Fields of Social Service.

Science.gov (United States)

Hodgkinson, Harold L; Thelin, John

This report is a summary of an 8-week pilot study of the current uses of unobtrusive measures in the various fields of social services. Unobtrusive measures are simply clues, traces, signs, patterns, or records that allow the indirect or inferential evaluation of phenomena. The survey suggests that unobtrusive measures have long been widely used…

Measuring Substance Use and Misuse via Survey Research: Unfinished Business.

Science.gov (United States)

Johnson, Timothy P

2015-01-01

This article reviews unfinished business regarding the assessment of substance use behaviors by using survey research methodologies, a practice that dates back to the earliest years of this journal's publication. Six classes of unfinished business are considered including errors of sampling, coverage, non-response, measurement, processing, and ethics. It may be that there is more now that we do not know than when this work began some 50 years ago.

Geophysical surveying in the Sacramento Delta for earthquake hazard assessment and measurement of peat thickness

Science.gov (United States)

Craig, M. S.; Kundariya, N.; Hayashi, K.; Srinivas, A.; Burnham, M.; Oikawa, P.

2017-12-01

Near surface geophysical surveys were conducted in the Sacramento-San Joaquin Delta for earthquake hazard assessment and to provide estimates of peat thickness for use in carbon models. Delta islands have experienced 3-8 meters of subsidence during the past century due to oxidation and compaction of peat. Projected sea level rise over the next century will contribute to an ongoing landward shift of the freshwater-saltwater interface, and increase the risk of flooding due to levee failure or overtopping. Seismic shear wave velocity (VS) was measured in the upper 30 meters to determine Uniform Building Code (UBC)/ National Earthquake Hazard Reduction Program (NEHRP) site class. Both seismic and ground penetrating radar (GPR) methods were employed to estimate peat thickness. Seismic surface wave surveys were conducted at eight sites on three islands and GPR surveys were conducted at two of the sites. Combined with sites surveyed in 2015, the new work brings the total number of sites surveyed in the Delta to twenty.Soil boreholes were made at several locations using a hand auger, and peat thickness ranged from 2.1 to 5.5 meters. Seismic surveys were conducted using the multichannel analysis of surface wave (MASW) method and the microtremor array method (MAM). On Bouldin Island, VS of the surficial peat layer was 32 m/s at a site with pure peat and 63 m/s at a site peat with higher clay and silt content. Velocities at these sites reached a similar value, about 125 m/s, at a depth of 10 m. GPR surveys were performed at two sites on Sherman Island using 100 MHz antennas, and indicated the base of the peat layer at a depth of about 4 meters, consistent with nearby auger holes.The results of this work include VS depth profiles and UBC/NEHRP site classifications. Seismic and GPR methods may be used in a complementary fashion to estimate peat thickness. The seismic surface wave method is a relatively robust method and more effective than GPR in many areas with high clay

Optimizing measurements of cluster velocities and temperatures for CCAT-prime and future surveys

Science.gov (United States)

Mittal, Avirukt; de Bernardis, Francesco; Niemack, Michael D.

2018-02-01

Galaxy cluster velocity correlations and mass distributions are sensitive probes of cosmology and the growth of structure. Upcoming microwave surveys will enable extraction of velocities and temperatures from many individual clusters for the first time. We forecast constraints on peculiar velocities, electron temperatures, and optical depths of galaxy clusters obtainable with upcoming multi-frequency measurements of the kinematic, thermal, and relativistic Sunyaev-Zeldovich effects. The forecasted constraints are compared for different measurement configurations with frequency bands between 90 GHz and 1 THz, and for different survey strategies for the 6-meter CCAT-prime telescope. We study methods for improving cluster constraints by removing emission from dusty star forming galaxies, and by using X-ray temperature priors from eROSITA. Cluster constraints are forecast for several model cluster masses. A sensitivity optimization for seven frequency bands is presented for a CCAT-prime first light instrument and a next generation instrument that takes advantage of the large optical throughput of CCAT-prime. We find that CCAT-prime observations are expected to enable measurement and separation of the SZ effects to characterize the velocity, temperature, and optical depth of individual massive clusters (~1015 Msolar). Submillimeter measurements are shown to play an important role in separating these components from dusty galaxy contamination. Using a modular instrument configuration with similar optical throughput for each detector array, we develop a rule of thumb for the number of detector arrays desired at each frequency to optimize extraction of these signals. Our results are relevant for a future "Stage IV" cosmic microwave background survey, which could enable galaxy cluster measurements over a larger range of masses and redshifts than will be accessible by other experiments.

Measurement of sedentary behaviour in population health surveys: a review and recommendations

Directory of Open Access Journals (Sweden)

Stephanie A. Prince

2017-12-01

Full Text Available Background The purpose of this review was to determine the most valid and reliable questions for targeting key modes of sedentary behaviour (SB in a broad range of national and international health surveillance surveys. This was done by reviewing the SB modules currently used in population health surveys, as well as examining SB questionnaires that have performed well in psychometric testing. Methods Health surveillance surveys were identified via scoping review and contact with experts in the field. Previous systematic reviews provided psychometric information on pediatric questionnaires. A comprehensive search of four bibliographic databases was used to identify studies reporting psychometric information for adult questionnaires. Only surveys/studies published/used in English or French were included. Results The review identified a total of 16 pediatric and 18 adult national/international surveys assessing SB, few of which have undergone psychometric testing. Fourteen pediatric and 35 adult questionnaires with psychometric information were included. While reliability was generally good to excellent for questions targeting key modes of SB, validity was poor to moderate, and reported much less frequently. The most valid and reliable questions targeting specific modes of SB were combined to create a single questionnaire targeting key modes of SB. Discussion Our results highlight the importance of including SB questions in survey modules that are adaptable, able to assess various modes of SB, and that exhibit adequate reliability and validity. Future research could investigate the psychometric properties of the module we have proposed in this paper, as well as other questionnaires currently used in national and international population health surveys.

Innovation and organisational performance: A critical review of the instruments used to measure organisational performance

Directory of Open Access Journals (Sweden)

Tebogo Sethibe

2016-10-01

Full Text Available Background: Innovation is recognised as one of the most important determinant of organisational performance. Yet, the results of studies that investigate the relationship between innovation and organisational performance are inconclusive. The inconsistency has been attributed to a number of factors, which include, among others, the measures used to evaluate organisational performance. Aim: This study was set out to identify, categorise and critically analyse the instruments used to assess organisational performance when investigating the relationship between innovation and organisational performance. Setting: The study focuses on all scientific publications reporting on organisational performance, inclusive of both financial and non-financial indicators of performance, and are not limited to any specific country or industry. Methods: The systematic literature review methodology was used to identify studies which investigated the relationship between innovation and organisational performance. Once identified, articles were analysed on the way organisational performance was measured. Classification was done with reference to financial and non-financial indicators, accounting and market-based, as well as objective and subjective measures. Results: The findings show that profitability, sales growth and return on assets (ROA are the most preferred accounting-based financial measures of organisation performance. In addition, Tobin’s Q was found to be the most favoured market-based financial measure of organisational performance. The study further reveals that market share, customer satisfaction and productivity are the most popular non-financial-based measures of organisational performance. Conclusion: The use of measures of organisational performance is often left to the discussion of the researcher, which is not implicitly wrong, but does little to contribute to the body of knowledge on this important topic. Researchers are firstly urged to

Reliability and prevalence of physical performance examination assessing mobility and balance in older persons in the US: data from the Third National Health and Nutrition Examination Survey.

Science.gov (United States)

Ostchega, Y; Harris, T B; Hirsch, R; Parsons, V L; Kington, R; Katzoff, M

2000-09-01

This report provides reliability and prevalence estimates by sex, age, and race/ethnicity of an observed physical performance examination (PPE) assessing mobility and balance. The Third National Health and Nutrition Examination Survey (NHANES III) 1988-1994. A cross-sectional nationally representative survey. All persons aged 60 and older (n = 5,403) who performed the PPE either in the mobile examination center (MEC) or in the home during NHANES III (conducted 1988-1994). The PPE included timed chair stand, full tandem stand, and timed 8-foot walk. Timed chair stand and 8-foot timed walk were reliable measurements (Intraclass Correlations > 0.5). Women were significantly slower (P physically limited than men.

Introduction to control system performance measurements

CERN Document Server

Garner, K C

1968-01-01

Introduction to Control System Performance Measurements presents the methods of dynamic measurements, specifically as they apply to control system and component testing. This book provides an introduction to the concepts of statistical measurement methods.Organized into nine chapters, this book begins with an overview of the applications of automatic control systems that pervade almost every area of activity ranging from servomechanisms to electrical power distribution networks. This text then discusses the common measurement transducer functions. Other chapters consider the basic wave

Training, Innovation and Business Performance: An Analysis of the Business Longitudinal Survey.

Science.gov (United States)

Dockery, A. Michael

This paper uses the Australian Bureau of Statistics' Business Longitudinal Survey to explore relationships between training, innovation, and firm performance for Australian businesses with less than 200 employees. The longitudinal nature of the data is used to test various hypotheses about the nature of the link between training, business changes,…

Results of the measurement survey of elevation and environmental media in surface impoundments 3513 (B) and 3524 (A) at Oak Ridge National Laboratory, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Murray, M.E.; Rose, D.A.; Brown, K.S.; Coe, R.H.C. III; Lawrence, J.D.; Winton, W.

1998-07-01

A measurement survey of the elevation and environmental media in impoundments 3513 (B) and 3524 (A) at the Oak Ridge National Laboratory (ORNL) was conducted during April 1998. The investigation was performed by the Measurement Applications and Development Group of the Life Sciences Division of ORNL at the request of Bechtel Jacobs Company. Measurement activities were conducted at selected locations in order to determine the depth and appearance of the sediment and describe the clay underlying the impoundments prior to remediation. The survey was a follow-up to a previous elevation survey. The survey included the following: collection of sediment/clay cores from selected locations in each impoundment; measurement and documentation of the elevation at the water surface, at the top of sediment, at the top of clay, and at the bottom of each core; visual inspection of each core by a soil scientist to confirm the presence of clay and not material such as fly ash and soda lime compacted over the last 50 years; measurement and documentation of the background beta-gamma radiation level at the time and location of collection of each core, the highest beta-gamma level along the sediment portion of each core, and the highest beta-gamma level along the clay portion of each core; measurement and documentation of the length of the clay and of the sediment portion of each core; photographic documentation of each core; and replacement of each core in the impoundment

Determinants of the use of value-based performance measures for managerial performance evaluation

NARCIS (Netherlands)

Dekker, H.C.; Groot, T.L.C.M.; Schoute, M.; Wiersma, E.

2012-01-01

As value-based (VB) performance measures include firms' cost of capital, they are considered more congruent than earnings measures. Prior studies, however, find that their use for managerial performance evaluation is less extensive than their presumed benefits would suggest. We examine how the

ASUPT Automated Objective Performance Measurement System.

Science.gov (United States)

Waag, Wayne L.; And Others

To realize its full research potential, a need exists for the development of an automated objective pilot performance evaluation system for use in the Advanced Simulation in Undergraduate Pilot Training (ASUPT) facility. The present report documents the approach taken for the development of performance measures and also presents data collected…

Testing measurement equivalence of experienced holiday quality: Evidence on built-in bias in the Flash Eurobarometer survey data

NARCIS (Netherlands)

Gelissen, J.P.T.M.

2018-01-01

In this contribution, we evaluate the degree of measurement equivalence between countries and over time for a measure of experienced holiday quality that has repeatedly been included in a public opinion survey series of high policy relevance: the Flash Eurobarometer survey series (2014–2016). The

Evaluating operator performance on full-scope simulators: A pragmatic approach to an intractable measurement problem

International Nuclear Information System (INIS)

Fuld, R.

1989-01-01

Industry trends toward full-scope, plant-referenced control room simulators have accelerated. The cost of such training is high, but the cost of training ineffectiveness is even higher if it permits serious errors or operator disqualification to occur. Effective measures of operator performance are needed, but the complexity of the task environment and the many aspects of and requirements for operator performance conspire to make such measurement a challenging problem. Combustion Engineering (C-E) Owners' Group task No. 572 was undertaken to develop a tractable and effective methodology for evaluating team performance in a requalification context on full-scope simulator scenarios. The following concepts were pursued as design goals for the method: 1. validity; 2. sensitivity; 3. reliability; 4. usability. In addition, the resulting approach was to meet the requirements of ES-601, Implementation Guidance of the NRC for Administration of Requalifying Exams. A survey of existing evaluation tools and techniques was made to determine the strengths and weaknesses of each. Based on those findings, a multimethod approach was developed drawing on the combined strengths of several general methods. The paper discusses procedural milestones, comments as subjective ratings, failure criteria, and tracked plant parameters

Performance measures for world class maintenance

International Nuclear Information System (INIS)

Labib, A.W.

1998-01-01

A main problem in maintenance in general, and in power plants and related equipment in particular, is the lack of a practical, consistent, and adaptive performance measure that provides a focused feedback and integrates preventive and corrective modes of maintenance. The presentation defines concepts of world class and benchmarking. Desirable features in an appropriate performance measure are identified. It then, demonstrates current practices in maintenance and criticises their shortcomings. An alternative model is presented through a case study. The model monitors performance from a general view, and then offers a focused analysis. The main conclusion is that the proposed model offers an adaptive and a dynamic framework, and hence production and maintenance are integrated in a 'real time' environment. The system is also flexible in working with any other criteria whether they are of a quantitative or a qualitative nature. (orig.) 16 refs

Performance measures for world class maintenance

Energy Technology Data Exchange (ETDEWEB)

Labib, A W [Department of Mechanical Engineering, University of Manchester, Institute of Science and Technology, Manchester (United Kingdom)

1999-12-31

A main problem in maintenance in general, and in power plants and related equipment in particular, is the lack of a practical, consistent, and adaptive performance measure that provides a focused feedback and integrates preventive and corrective modes of maintenance. The presentation defines concepts of world class and benchmarking. Desirable features in an appropriate performance measure are identified. It then, demonstrates current practices in maintenance and criticises their shortcomings. An alternative model is presented through a case study. The model monitors performance from a general view, and then offers a focused analysis. The main conclusion is that the proposed model offers an adaptive and a dynamic framework, and hence production and maintenance are integrated in a `real time` environment. The system is also flexible in working with any other criteria whether they are of a quantitative or a qualitative nature. (orig.) 16 refs.

Performance measures for world class maintenance

Energy Technology Data Exchange (ETDEWEB)

Labib, A.W. [Department of Mechanical Engineering, University of Manchester, Institute of Science and Technology, Manchester (United Kingdom)

1998-12-31

A main problem in maintenance in general, and in power plants and related equipment in particular, is the lack of a practical, consistent, and adaptive performance measure that provides a focused feedback and integrates preventive and corrective modes of maintenance. The presentation defines concepts of world class and benchmarking. Desirable features in an appropriate performance measure are identified. It then, demonstrates current practices in maintenance and criticises their shortcomings. An alternative model is presented through a case study. The model monitors performance from a general view, and then offers a focused analysis. The main conclusion is that the proposed model offers an adaptive and a dynamic framework, and hence production and maintenance are integrated in a `real time` environment. The system is also flexible in working with any other criteria whether they are of a quantitative or a qualitative nature. (orig.) 16 refs.

Mathematical modeling of a survey-meter used to measure radioactivity in human thyroids: Monte Carlo calculations of the device response and uncertainties

Science.gov (United States)

Khrutchinsky, Arkady; Drozdovitch, Vladimir; Kutsen, Semion; Minenko, Victor; Khrouch, Valeri; Luckyanov, Nickolas; Voillequé, Paul; Bouville, André

2012-01-01

This paper presents results of Monte Carlo modeling of the SRP-68-01 survey meter used to measure exposure rates near the thyroid glands of persons exposed to radioactivity following the Chernobyl accident. This device was not designed to measure radioactivity in humans. To estimate the uncertainty associated with the measurement results, a mathematical model of the SRP-68-01 survey meter was developed and verified. A Monte Carlo method of numerical simulation of radiation transport has been used to calculate the calibration factor for the device and evaluate its uncertainty. The SRP-68-01 survey meter scale coefficient, an important characteristic of the device, was also estimated in this study. The calibration factors of the survey meter were calculated for 131I, 132I, 133I, and 135I content in the thyroid gland for six age groups of population: newborns; children aged 1 yr, 5 yr, 10 yr, 15 yr; and adults. A realistic scenario of direct thyroid measurements with an “extended” neck was used to calculate the calibration factors for newborns and one-year-olds. Uncertainties in the device calibration factors due to variability of the device scale coefficient, variability in thyroid mass and statistical uncertainty of Monte Carlo method were evaluated. Relative uncertainties in the calibration factor estimates were found to be from 0.06 for children aged 1 yr to 0.1 for 10-yr and 15-yr children. The positioning errors of the detector during measurements deviate mainly in one direction from the estimated calibration factors. Deviations of the device position from the proper geometry of measurements were found to lead to overestimation of the calibration factor by up to 24 percent for adults and up to 60 percent for 1-yr children. The results of this study improve the estimates of 131I thyroidal content and, consequently, thyroid dose estimates that are derived from direct thyroid measurements performed in Belarus shortly after the Chernobyl accident. PMID:22245289

On music performance, theories, measurement en diversity

NARCIS (Netherlands)

Timmers, R.; Honing, H.J.

2002-01-01

Measurement of musical performances is of interest to studies in musicology, music psychology and music performance practice, but in general it has not been considered the main issue: when analyzing Western classical music, these disciplines usually focus on the score rather than the performance.

Measurement of the Strategic Performance of Hospitality in the Kingdom of Saudi Arabia: a balanced scorecard Approach (BSC

Directory of Open Access Journals (Sweden)

Mohamed A.M. El-Hindawy, Dr.

2014-06-01

Full Text Available In this paper, we planned to realize the marketing managers’ perceptions through their perception of Strategic Performance Dimension of view and the Balanced scorecard (BSC technique for the Measurement of the Strategic Performance.The respondents in this study were a group of Marketing managers working in the Hospitality Sector (Experiences in number of years of Madina, Saudi Arabia Hospitality. It has been observed trough literature and a limited Marketing Managers’ survey that only financial perspective measures are used with objectives. Balanced Score Card (BSC enables to measure objectives across four perspectives: (1 the financial perspective, (2 the customer perspective, (3 the internal business process perspective, and (4 the learning and growth perspective. Hypothesis is formulated about the relationship between perception of managers about the Dimension of view and the Balanced Score Card (BSC and the years of Experience. We also designed a questionnaire that was distributed to a population of 130 Marketing managers in the field of Hospitality. The year of study was 2011, with Marketing managers’ survey instruments that measure Balanced Score Card Dimension. The result of the study shows that there are significant differences between the three types of Hospitality Marketing managers’ (Experience in number of years:1-3years, 3-6years, more than 6years. After discussing the findings, some policy implications are suggested for the Hospitality, as well to practitioners seeking an understanding of a practical managerial tool. Limitations of the study are highlighted and further research discussions are suggested.

Radiological survey results at 5 Porter Street, Beverly, Massachusetts (VB019)

International Nuclear Information System (INIS)

Foley, R.D.; Johnson, C.A.

1992-07-01

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 5 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Site Remedial Action Program guidelines

Radiological survey results at 2 Porter Street, Beverly, Massachusetts (VB005)

International Nuclear Information System (INIS)

Foley, R.D.; Carrier, R.F.

1992-08-01

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 2 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium dust from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples fore radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

Radiological survey results at 9 Porter Street, Beverly, Massachusetts (VB020)

International Nuclear Information System (INIS)

Foley, R.D.; Johnson, C.A.

1992-07-01

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at 9 Porter Street, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

Development of a Conceptual Model and Survey Instrument to Measure Conscientious Objection to Abortion Provision.

Directory of Open Access Journals (Sweden)

Laura Florence Harris

Full Text Available Conscientious objection to abortion, clinicians' refusal to perform legal abortions because of their religious or moral beliefs, has been the subject of increasing debate among bioethicists, policymakers, and public health advocates in recent years. Conscientious objection policies are intended to balance reproductive rights and clinicians' beliefs. However, in practice, clinician objection can act as a barrier to abortion access-impinging on reproductive rights, and increasing unsafe abortion and related morbidity and mortality. There is little information about conscientious objection from a medical or public health perspective. A quantitative instrument is needed to assess prevalence of conscientious objection and to provide insight on its practice. This paper describes the development of a survey instrument to measure conscientious objection to abortion provision.A literature review, and in-depth formative interviews with stakeholders in Colombia were used to develop a conceptual model of conscientious objection. This model led to the development of a survey, which was piloted, and then administered, in Ghana.The model posits three domains of conscientious objection that form the basis for the survey instrument: 1 beliefs about abortion and conscientious objection; 2 actions related to conscientious objection and abortion; and 3 self-identification as a conscientious objector.The instrument is intended to be used to assess prevalence among clinicians trained to provide abortions, and to gain insight on how conscientious objection is practiced in a variety of settings. Its results can inform more effective and appropriate strategies to regulate conscientious objection.

LITERATURE SURVEY ON ISOTOPIC ABUNDANCE RATIO MEASUREMENTS - 2001-2005

International Nuclear Information System (INIS)

HOLDEN, N.E.

2005-01-01

Along with my usual weekly review of the published literature for new nuclear data, I also search for new candidates for best measurements of isotopic abundances from a single source. Most of the published articles, that I previously had found in the Research Library at the Brookhaven Lab, have already been sent to the members of the Atomic Weights Commission, by either Michael Berglund or Thomas Walczyk. In the last few days, I checked the published literature for any other articles in the areas of natural variations in isotopic abundance ratios, measurements of isotopic abundance ratios on samples of extra-terrestrial material and isotopic abundance ratio measurements performed using ICPMS instruments. Hopefully this information will be of interest to members of the Commission, the sub-committee on isotopic abundance measurements (SIAM), members of the former sub-committee on natural isotopic fractionation (SNIF), the sub-committee on extra-terrestrial isotope ratios (SETIR), the RTCE Task Group and the Guidelines Task Group, who are dealing with ICPMS and TIMS comparisons. In the following report, I categorize the publications in one of four areas. Measurements performed using either positive or negative ions with Thermal Ionization Mass Spectrometer, TIMS, instruments; measurements performed on Inductively Coupled Plasma Mass Spectrometer, ICPMS, instruments; measurements of natural variations of the isotopic abundance ratios; and finally measurements on extra-terrestrial samples with instrumentation of either type. There is overlap in these areas. I selected out variations and ET results first and then categorized the rest of the papers by TIMS and ICPMS

Development of measurement standards for verifying functional performance of surface texture measuring instruments

Energy Technology Data Exchange (ETDEWEB)

Fujii, A [Life and Industrial Product Development Department Olympus Corporation, 2951 Ishikawa-machi, Hachiouji-shi, Tokyo (Japan); Suzuki, H [Industrial Marketing and Planning Department Olympus Corporation, Shinjyuku Monolith, 3-1 Nishi-Shinjyuku 2-chome, Tokyo (Japan); Yanagi, K, E-mail: a_fujii@ot.olympus.co.jp [Department of Mechanical Engineering, Nagaoka University of Technology, 1603-1 Kamitomioka-machi, Nagaoka-shi, Niigata (Japan)

2011-08-19

A new measurement standard is proposed for verifying overall functional performance of surface texture measuring instruments. Its surface is composed of sinusoidal surface waveforms of chirp signals along horizontal cross sections of the material measure. One of the notable features is that the amplitude of each cycle in the chirp signal form is geometrically modulated so that the maximum slope is kept constant. The maximum slope of the chirp-like signal is gradually decreased according to movement in the lateral direction. We fabricated the measurement standard by FIB processing, and it was calibrated by AFM. We tried to evaluate the functional performance of Laser Scanning Microscope by this standard in terms of amplitude response with varying slope angles. As a result, it was concluded that the proposed standard can easily evaluate the performance of surface texture measuring instruments.

Measuring performance at trade shows

DEFF Research Database (Denmark)

Hansen, Kåre

2004-01-01

Trade shows is an increasingly important marketing activity to many companies, but current measures of trade show performance do not adequately capture dimensions important to exhibitors. Based on the marketing literature's outcome and behavior-based control system taxonomy, a model is built...... that captures a outcome-based sales dimension and four behavior-based dimensions (i.e. information-gathering, relationship building, image building, and motivation activities). A 16-item instrument is developed for assessing exhibitors perceptions of their trade show performance. The paper presents evidence...

Corporate Social Performance: From Output Measurement to Impact Measurement

NARCIS (Netherlands)

K.E.H. Maas (Karen)

2009-01-01

textabstractAll organisations have social, environmental and economic impacts that effect people, their communities and the natural environment. Impacts include intended as well as unintended effects and negative as well as positive effects. Current practice in performance measurement tends to focus

Balanced Scorecard Based Performance Measurement & Strategic Management System

OpenAIRE

Permatasari, Paulina

2006-01-01

Developing strategy and performance measurement are an integral part of management control system. Making strategic decision about planning and controlling require information regarding how different subunits in organization work. To be effective, performance measurement, both financial and non-financial must motivate manager and employees at different levels to force goal accomplishment and organization strategic. An organization's measurement system strongly affects the behavior of people b...

Illumination Sufficiency Survey Techniques: In-situ Measurements of Lighting System Performance and a User Preference Survey for Illuminance in an Off-Grid, African Setting

Energy Technology Data Exchange (ETDEWEB)

Alstone, Peter; Jacobson, Arne; Mills, Evan

2010-08-26

Efforts to promote rechargeable electric lighting as a replacement for fuel-based light sources in developing countries are typically predicated on the notion that lighting service levels can be maintained or improved while reducing the costs and environmental impacts of existing practices. However, the extremely low incomes of those who depend on fuel-based lighting create a need to balance the hypothetically possible or desirable levels of light with those that are sufficient and affordable. In a pilot study of four night vendors in Kenya, we document a field technique we developed to simultaneously measure the effectiveness of lighting service provided by a lighting system and conduct a survey of lighting service demand by end-users. We took gridded illuminance measurements across each vendor's working and selling area, with users indicating the sufficiency of light at each point. User light sources included a mix of kerosene-fueled hurricane lanterns, pressure lamps, and LED lanterns.We observed illuminance levels ranging from just above zero to 150 lux. The LED systems markedly improved the lighting service levels over those provided by kerosene-fueled hurricane lanterns. Users reported that the minimum acceptable threshold was about 2 lux. The results also indicated that the LED lamps in use by the subjects did not always provide sufficient illumination over the desired retail areas. Our sample size is much too small, however, to reach any conclusions about requirements in the broader population. Given the small number of subjects and very specific type of user, our results should be regarded as indicative rather than conclusive. We recommend replicating the method at larger scales and across a variety of user types and contexts. Policymakers should revisit the subject of recommended illuminance levels regularly as LED technology advances and the price/service balance point evolves.

A comparative study of performance measurement standards of railway operator

Directory of Open Access Journals (Sweden)

Pongjirawut Siripong

2017-01-01

Full Text Available The European standard (EN 13816, is one of the widely accepted standards for measuring the quality of public passenger transport (PPT service. EN 13816 indicates 8 measurement criteria, 29 sub-criteria and 193 Key Performance Indicators (KPIs to be used to measure the performance of railway operators. Nowadays, there are other addition criteria beyond EN13816, developed by various organisations. This research firstly aims to explore the service performance measurement of railway operators used by actual railway operators at international level and in Thailand. After an intensive review of performance measurement standards, 9 standards are compiled and compared in terms of criteria, sub-criteria and KPIs using a cluster analysis methodology. The result found additional performance measurement aspects at 2 sub-criteria and 91 KPIs in addition to EN 13816. This research summarized and compared different performance measurement standards to measure service quality of metro rail line.

Use of and confidence in administering outcome measures among clinical prosthetists: Results from a national survey and mixed-methods training program.

Science.gov (United States)

Gaunaurd, Ignacio; Spaulding, Susan E; Amtmann, Dagmar; Salem, Rana; Gailey, Robert; Morgan, Sara J; Hafner, Brian J

2015-08-01

Outcome measures can be used in prosthetic practices to evaluate interventions, inform decision making, monitor progress, document outcomes, and justify services. Strategies to enhance prosthetists' ability to use outcome measures are needed to facilitate their adoption in routine practice. To assess prosthetists' use of outcome measures and evaluate the effects of training on their confidence in administering performance-based measures. Cross-sectional and single-group pretest-posttest survey. Seventy-nine certified prosthetists (mean of 16.0 years of clinical experience) were surveyed about their experiences with 20 standardized outcome measures. Prosthetists were formally trained by the investigators to administer the Timed Up and Go and Amputee Mobility Predictor. Prosthetists' confidence in administering the Timed Up and Go and Amputee Mobility Predictor was measured before and after training. The majority of prosthetists (62%) were classified as non-routine outcome measure users. Confidence administering the Timed Up and Go and Amputee Mobility Predictor prior to training was low-to-moderate across the study sample. Training significantly (p measures. Interactive training resulted in a statistically significant increase of prosthetists' confidence in administering the Timed Up and Go and Amputee Mobility Predictor and may facilitate use of outcome measures in clinical practice. Frequency of outcome measure use in the care of persons with limb loss has not been studied. Study results suggest that prosthetists may not regularly use standardized outcome measures and report limited confidence in administering them. Training enhances confidence and may encourage use of outcome measures in clinical practice. © The International Society for Prosthetics and Orthotics 2014.

Measuring performance in virtual reality phacoemulsification surgery

Science.gov (United States)

Söderberg, Per; Laurell, Carl-Gustaf; Simawi, Wamidh; Skarman, Eva; Nordh, Leif; Nordqvist, Per

2008-02-01

We have developed a virtual reality (VR) simulator for phacoemulsification surgery. The current work aimed at developing a relative performance index that characterizes the performance of an individual trainee. We recorded measurements of 28 response variables during three iterated surgical sessions in 9 experienced cataract surgeons, separately for the sculpting phase and the evacuation phase of phacoemulsification surgery and compared their outcome to that of a reference group of naive trainees. We defined an individual overall performance index, an individual class specific performance index and an individual variable specific performance index. We found that on an average the experienced surgeons performed at a lower level than a reference group of naive trainees but that this was particularly attributed to a few surgeons. When their overall performance index was further analyzed as class specific performance index and variable specific performance index it was found that the low level performance was attributed to a behavior that is acceptable for an experienced surgeon but not for a naive trainee. It was concluded that relative performance indices should use a reference group that corresponds to the measured individual since the definition of optimal surgery may vary among trainee groups depending on their level of experience.

The Curvilinear Association between Performance Measurement System Design and Strategic Performance

DEFF Research Database (Denmark)

Schneider, Melanie L.; Mahlendorf, Matthias D.; Schäffer, Utz

This paper reconciles prior research regarding beneficial and detrimental effects of performance measurement system (PMS) design on performance by arguing for a curvilinear association. By taking the too-much-of-a-good-thing effect as a starting point, we challenge the assumption of a linear...

Improvement an enterprises marketing performance measurement system

Directory of Open Access Journals (Sweden)

Stanković Ljiljana

2013-01-01

Full Text Available Business conditions in which modern enterprises do business are more and more complex. The complexity of the business environment is caused by activities of external and internal factors, which imposes the need for the turn in management focus. One of key turns is related to the need of adaptation and development of new business performance evaluation systems. The evaluation of marketing contribution to business performance is very important however a complex task as well. The marketing theory and practice indicates the need for developing adequate standards and systems for evaluating the efficiency of marketing decisions. The better understanding of marketing standards and ways that managers use is a very important factor that affects the efficiency of strategic decision-making. The paper presents the results of researching the way in which managers perceive and apply marketing performance measures. The data that were received through the field research sample enabled the consideration of the managers' attitudes on practical ways of implementing marketing performance measurement and identifying measures that managers imply as used mostly in business practice.

Total performance measurement and management: TPM2

Energy Technology Data Exchange (ETDEWEB)

Sheather, G. [University of Technology, Sydney, NSW (Australia)

1996-10-01

As the rate of incremental improvement activities and business process re-engineering programs increase, product development times reduce, collaborative endeavours between OEMs and out-sourcing suppliers increase, as agile manufacturing responds to the demands of a global marketplace, the `virtual` organisation is becoming a reality. In this context, customers, partners, suppliers and manufacturers are increasingly separated by field geography, time zone, and availability, but linked by distributed information systems. Measuring and monitoring business performance in this environment requires a entirely different framework and set of key performance indicators (KPIs) usually associated with traditional financial accounting approaches. These approaches are critiqued, then the paper introduces a new concept `Total Performance Measurement Management` (TPM2), to distinguish it from the conventional TPM (Total Productive Management). A model for combining both financial and non-financial KPIs relevant to real-time performance measures stretching across strategic, business unit and operational levels, is presented. The results of the model confirm the hypothesis that it is feasible to develop a TPM2 framework for achieving enterprise wide strategic objectives. (author). 6 tabs., 18 figs., refs.

Measuring individual work performance: identifying and selecting indicators.

Science.gov (United States)

Koopmans, Linda; Bernaards, Claire M; Hildebrandt, Vincent H; de Vet, Henrica C W; van der Beek, Allard J

2014-01-01

Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. This study was designed to (1) identify indicators for each dimension, (2) select the most relevant indicators, and (3) determine the relative weight of each dimension in ratings of work performance. IWP indicators were identified from multiple research disciplines, via literature, existing questionnaires, and expert interviews. Subsequently, experts selected the most relevant indicators per dimension and scored the relative weight of each dimension in ratings of IWP. In total, 128 unique indicators were identified. Twenty-three of these indicators were selected by experts as most relevant for measuring IWP. Task performance determined 36% of the work performance rating, while the other three dimensions respectively determined 22%, 20% and 21% of the rating. Notable consensus was found on relevant indicators of IWP, reducing the number from 128 to 23 relevant indicators. This provides an important step towards the development of a standardized, generic and short measurement instrument for assessing IWP.

The failing measurement of attitudes: How semantic determinants of individual survey responses come to replace measures of attitude strength.

Science.gov (United States)

Arnulf, Jan Ketil; Larsen, Kai Rune; Martinsen, Øyvind Lund; Egeland, Thore

2018-01-12

The traditional understanding of data from Likert scales is that the quantifications involved result from measures of attitude strength. Applying a recently proposed semantic theory of survey response, we claim that survey responses tap two different sources: a mixture of attitudes plus the semantic structure of the survey. Exploring the degree to which individual responses are influenced by semantics, we hypothesized that in many cases, information about attitude strength is actually filtered out as noise in the commonly used correlation matrix. We developed a procedure to separate the semantic influence from attitude strength in individual response patterns, and compared these results to, respectively, the observed sample correlation matrices and the semantic similarity structures arising from text analysis algorithms. This was done with four datasets, comprising a total of 7,787 subjects and 27,461,502 observed item pair responses. As we argued, attitude strength seemed to account for much information about the individual respondents. However, this information did not seem to carry over into the observed sample correlation matrices, which instead converged around the semantic structures offered by the survey items. This is potentially disturbing for the traditional understanding of what survey data represent. We argue that this approach contributes to a better understanding of the cognitive processes involved in survey responses. In turn, this could help us make better use of the data that such methods provide.

An Examination of Organizatinal Performance Measurement System Utilization

OpenAIRE

DeBusk, Gerald Kenneth

2003-01-01

This dissertation provides results of three studies, which examine the utilization of organizational performance measurement systems. Evidence gathered in the first study provides insight into the number of perspectives or components found in the evaluation of an organization's performance and the relative weight placed on those components. The evidence suggests that the number of performance measurement components and their relative composition is situational. Components depend heavily on th...

APPROXIMATIONS TO PERFORMANCE MEASURES IN QUEUING SYSTEMS

Directory of Open Access Journals (Sweden)

Kambo, N. S.

2012-11-01

Full Text Available Approximations to various performance measures in queuing systems have received considerable attention because these measures have wide applicability. In this paper we propose two methods to approximate the queuing characteristics of a GI/M/1 system. The first method is non-parametric in nature, using only the first three moments of the arrival distribution. The second method treads the known path of approximating the arrival distribution by a mixture of two exponential distributions by matching the first three moments. Numerical examples and optimal analysis of performance measures of GI/M/1 queues are provided to illustrate the efficacy of the methods, and are compared with benchmark approximations.

Performance Measurement of Research Activitities

DEFF Research Database (Denmark)

Jakobsen, Morten; Jensen, Tina Blegind; Peyton, Margit Malmmose

Performance measurements have made their entry into the world of universities. Every research activity is registered in a database and the output measures form the foundation for managerial decisions. The purpose of this chapter is to investigate the registration practices among researchers...... the registrations as a way to be promoted and to legitimise and account for their work; on the other hand, the economic incentives behind ranking lists and bibliographic research indicators threaten the individual researcher's freedom. The findings also show how managers have difficulties in translating back...

Measurement properties of performance-based measures to assess physical function in hip and knee osteoarthritis

DEFF Research Database (Denmark)

Dobson, F; Hinman, R S; Hall, M

2012-01-01

OBJECTIVES: To systematically review the measurement properties of performance-based measures to assess physical function in people with hip and/or knee osteoarthritis (OA). METHODS: Electronic searches were performed in MEDLINE, CINAHL, Embase, and PsycINFO up to the end of June 2012. Two...... investigating measurement properties of performance measures, including responsiveness and interpretability in people with hip and/or knee OA, is needed. Consensus on which combination of measures will best assess physical function in people with hip/and or knee OA is urgently required....

Procedure to Measure Indoor Lighting Energy Performance

Energy Technology Data Exchange (ETDEWEB)

Deru, M.; Blair, N.; Torcellini, P.

2005-10-01

This document provides standard definitions of performance metrics and methods to determine them for the energy performance of building interior lighting systems. It can be used for existing buildings and for proposed buildings. The primary users for whom these documents are intended are building energy analysts and technicians who design, install, and operate data acquisition systems, and who analyze and report building energy performance data. Typical results from the use of this procedure are the monthly and annual energy used for lighting, energy savings from occupancy or daylighting controls, and the percent of the total building energy use that is used by the lighting system. The document is not specifically intended for retrofit applications. However, it does complement Measurement and Verification protocols that do not provide detailed performance metrics or measurement procedures.

Measuring individual work performance: Identifying and selecting indicators

NARCIS (Netherlands)

Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; de Vet, H.C.W.; van der Beek, A.J.

2014-01-01

BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions.

GRAPH THEORY APPROACH TO QUANTIFY UNCERTAINTY OF PERFORMANCE MEASURES

Directory of Open Access Journals (Sweden)

Sérgio D. Sousa

2015-03-01

Full Text Available In this work, the performance measurement process is studied to quantify the uncertainty induced in the resulting performance measure (PM. To that end, the causes of uncertainty are identified, analysing the activities undertaken in the three following stages of the performance measurement process: design and implementation, data collection and record, and determination and analysis. A quantitative methodology based on graph theory and on the sources of uncertainty of the performance measurement process is used to calculate an uncertainty index to evaluate the level of uncertainty of a given PM or (key performance indicator. An application example is presented. The quantification of PM uncertainty could contribute to better represent the risk associated with a given decision and also to improve the PM to increase its precision and reliability.

WisDOT statewide customer satisfaction survey.

Science.gov (United States)

2013-02-01

The purpose of this study was to develop and initiate a new customer satisfaction tool that would establish a set of baseline : departmental performance measures and be sustainable for future use. ETC Institute completed a statewide customer : survey...

Performance measures for transform data coding.

Science.gov (United States)

Pearl, J.; Andrews, H. C.; Pratt, W. K.

1972-01-01

This paper develops performance criteria for evaluating transform data coding schemes under computational constraints. Computational constraints that conform with the proposed basis-restricted model give rise to suboptimal coding efficiency characterized by a rate-distortion relation R(D) similar in form to the theoretical rate-distortion function. Numerical examples of this performance measure are presented for Fourier, Walsh, Haar, and Karhunen-Loeve transforms.

Multi-instance dictionary learning via multivariate performance measure optimization

KAUST Repository

Wang, Jim Jing-Yan

2016-12-29

The multi-instance dictionary plays a critical role in multi-instance data representation. Meanwhile, different multi-instance learning applications are evaluated by specific multivariate performance measures. For example, multi-instance ranking reports the precision and recall. It is not difficult to see that to obtain different optimal performance measures, different dictionaries are needed. This observation motives us to learn performance-optimal dictionaries for this problem. In this paper, we propose a novel joint framework for learning the multi-instance dictionary and the classifier to optimize a given multivariate performance measure, such as the F1 score and precision at rank k. We propose to represent the bags as bag-level features via the bag-instance similarity, and learn a classifier in the bag-level feature space to optimize the given performance measure. We propose to minimize the upper bound of a multivariate loss corresponding to the performance measure, the complexity of the classifier, and the complexity of the dictionary, simultaneously, with regard to both the dictionary and the classifier parameters. In this way, the dictionary learning is regularized by the performance optimization, and a performance-optimal dictionary is obtained. We develop an iterative algorithm to solve this minimization problem efficiently using a cutting-plane algorithm and a coordinate descent method. Experiments on multi-instance benchmark data sets show its advantage over both traditional multi-instance learning and performance optimization methods.

Multi-instance dictionary learning via multivariate performance measure optimization

KAUST Repository

Wang, Jim Jing-Yan; Tsang, Ivor Wai-Hung; Cui, Xuefeng; Lu, Zhiwu; Gao, Xin

2016-01-01

The multi-instance dictionary plays a critical role in multi-instance data representation. Meanwhile, different multi-instance learning applications are evaluated by specific multivariate performance measures. For example, multi-instance ranking reports the precision and recall. It is not difficult to see that to obtain different optimal performance measures, different dictionaries are needed. This observation motives us to learn performance-optimal dictionaries for this problem. In this paper, we propose a novel joint framework for learning the multi-instance dictionary and the classifier to optimize a given multivariate performance measure, such as the F1 score and precision at rank k. We propose to represent the bags as bag-level features via the bag-instance similarity, and learn a classifier in the bag-level feature space to optimize the given performance measure. We propose to minimize the upper bound of a multivariate loss corresponding to the performance measure, the complexity of the classifier, and the complexity of the dictionary, simultaneously, with regard to both the dictionary and the classifier parameters. In this way, the dictionary learning is regularized by the performance optimization, and a performance-optimal dictionary is obtained. We develop an iterative algorithm to solve this minimization problem efficiently using a cutting-plane algorithm and a coordinate descent method. Experiments on multi-instance benchmark data sets show its advantage over both traditional multi-instance learning and performance optimization methods.

Case-Mix Adjustment of the Bereaved Family Survey.

Science.gov (United States)

Kutney-Lee, Ann; Carpenter, Joan; Smith, Dawn; Thorpe, Joshua; Tudose, Alina; Ersek, Mary

2018-01-01

Surveys of bereaved family members are increasingly being used to evaluate end-of-life (EOL) care and to measure organizational performance in EOL care quality. The Bereaved Family Survey (BFS) is used to monitor EOL care quality and benchmark performance in the Veterans Affairs (VA) health-care system. The objective of this study was to develop a case-mix adjustment model for the BFS and to examine changes in facility-level scores following adjustment, in order to provide fair comparisons across facilities. We conducted a cross-sectional secondary analysis of medical record and survey data from veterans and their family members across 146 VA medical centers. Following adjustment using model-based propensity weighting, the mean change in the BFS-Performance Measure score across facilities was -0.6 with a range of -2.6 to 0.6. Fifty-five (38%) facilities changed within ±0.5 percentage points of their unadjusted score. On average, facilities that benefited most from adjustment cared for patients with greater comorbidity burden and were located in urban areas in the Northwest and Midwestern regions of the country. Case-mix adjustment results in minor changes to facility-level BFS scores but allows for fairer comparisons of EOL care quality. Case-mix adjustment of the BFS positions this National Quality Forum-endorsed measure for use in public reporting and internal quality dashboards for VA leadership and may inform the development and refinement of case-mix adjustment models for other surveys of bereaved family members.

Measuring individual work performance: identifying and selecting indicators

NARCIS (Netherlands)

Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; Vet, H.C de; Beek, A.J. van der

2014-01-01

BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. OBJECTIVE: This

Performance measurement, expectancy and agency theory: An experimental study

NARCIS (Netherlands)

Sloof, R.; van Praag, C.M.

2008-01-01

Theoretical analyses of (optimal) performance measures are typically performed within the realm of the linear agency model. This model implies that, for a given compensation scheme, the agent’s optimal effort is unrelated to the amount of noise in the performance measure. In contrast, expectancy

Changes in Handset Performance Measures due to Spherical Radiation Pattern Measurement Uncertainty

DEFF Research Database (Denmark)

Nielsen, Jesper Ødum; Pedersen, Gert Frølund

An important characteristic of a mobile handset is its ability to receive and transmit power. One way to characterize the performance of a handset in this respect is to use measurements of the spherical radiation pattern from which the total radiated power (TRP), total isotropic sensitivity (TIS)...... with respect to the environment. Standard deviations up to about 0.5dB and a maximum deviation of about 1.6dB were found....... in the performance measures are investigated for both the GSM-900 and the GSM-1800 band. Despite the deliberately large deviations from the reference position, the changes in TRP and TIS are generally within ±0.5dB with a maximum of about 1.4dB. For the MEG values the results depend on the orientation of the handset...... system that may introduce errors in standardized performance measurements. Radiation patterns of six handsets have been measured while they were mounted at various offsets from the reference position defined by the Cellular Telecommunications & Internet Association (CTIA) certification. The change...

PERFORMANCE MEASURES OF STUDENTS IN EXAMINATIONS: A STOCHASTIC APPROACH

OpenAIRE

Goutam Saha; GOUTAM SAHA

2013-01-01

Data on Secondary and Higher Secondary examination (science stream) results from Tripura (North-East India) schools are analyzed to measure the performance of students based on tests and also the performance measures of schools based on final results and continuous assessment processes are obtained. The result variation in terms of grade points in the Secondary and Higher Secondary examinations are analysed using different sets of performance measures. The transition probabilities from one g...

Radiological survey results at Porter Street City Park, Beverly, Massachusetts (VB026)

International Nuclear Information System (INIS)

Foley, R.D.; Johnson, C.A.

1992-08-01

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted a radiological survey at the Porter Street City Park, Beverly, Massachusetts. The survey was performed in May 1991. The purpose of the survey was to determine if uranium from work performed under government contract at the former Ventron facility had migrated off-site to neighboring areas. The survey included a surface gamma scan and the collection of soil samples for radionuclide analyses. Results of the survey demonstrated no radionuclide concentrations or radiation measurements in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines

Measuring Distribution Performance? Benchmarking Warrants Your Attention

Energy Technology Data Exchange (ETDEWEB)

Ericson, Sean J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Alvarez, Paul [The Wired Group

2018-04-13

Identifying, designing, and measuring performance metrics is critical to securing customer value, but can be a difficult task. This article examines the use of benchmarks based on publicly available performance data to set challenging, yet fair, metrics and targets.

Survey and analysis of radiation safety management systems at medical institutions. Second report. Radiation measurement, calibration of radiation survey meters, and periodic check of installations, equipment, and protection instruments

International Nuclear Information System (INIS)

Ohba, Hisateru; Ogasawara, Katsuhiko; Aburano, Tamio

2006-01-01

We carried out a questionnaire survey to determine the actual situation of radiation safety management measures in all medical institutions in Japan that had nuclear medicine facilities. The questionnaire consisted of questions concerning the evaluation of shielding capacity; radiation measurement; periodic checks of installations, equipment, and protection instruments; and the calibration of radiation survey meters. The analysis was undertaken according to region, type of establishment, and number of beds. The overall response rate was 60 percent. For the evaluation of shielding capacity, the outsourcing rate was 53 percent of the total. For the radiation measurements of ''leakage radiation dose and radioactive contamination'' and contamination of radioactive substances in the air'', the outsourcing rates were 28 percent and 35 percent of the total, respectively (p<0.001, according to region and establishment). For the periodic check of radiation protection instruments, the implementation rate was 98 percent, and the outsourcing rate was 32 percent for radiation survey meters and 47 percent for lead aprons. The non-implemented rate for calibration of radiation survey meters was 25 percent of the total (p<0.001, according to region and establishment). The outsourcing rate for calibration of radiation survey meters accounted for 87 percent of the total, and of these medical institutions, 72 percent undertook annual calibration. The implementation rate for patient exposure measurement was 20 percent of the total (p<0.001, according to number of beds), and of these medical institutions 46 percent recorded measurement outcome. (author)

Assessing hospital disaster preparedness: a comparison of an on-site survey, directly observed drill performance, and video analysis of teamwork.

Science.gov (United States)

Kaji, Amy H; Langford, Vinette; Lewis, Roger J

2008-09-01

There is currently no validated method for assessing hospital disaster preparedness. We determine the degree of correlation between the results of 3 methods for assessing hospital disaster preparedness: administration of an on-site survey, drill observation using a structured evaluation tool, and video analysis of team performance in the hospital incident command center. This was a prospective, observational study conducted during a regional disaster drill, comparing the results from an on-site survey, a structured disaster drill evaluation tool, and a video analysis of teamwork, performed at 6 911-receiving hospitals in Los Angeles County, CA. The on-site survey was conducted separately from the drill and assessed hospital disaster plan structure, vendor agreements, modes of communication, medical and surgical supplies, involvement of law enforcement, mutual aid agreements with other facilities, drills and training, surge capacity, decontamination capability, and pharmaceutical stockpiles. The drill evaluation tool, developed by Johns Hopkins University under contract from the Agency for Healthcare Research and Quality, was used to assess various aspects of drill performance, such as the availability of the hospital disaster plan, the geographic configuration of the incident command center, whether drill participants were identifiable, whether the noise level interfered with effective communication, and how often key information (eg, number of available staffed floor, intensive care, and isolation beds; number of arriving victims; expected triage level of victims; number of potential discharges) was received by the incident command center. Teamwork behaviors in the incident command center were quantitatively assessed, using the MedTeams analysis of the video recordings obtained during the disaster drill. Spearman rank correlations of the results between pair-wise groupings of the 3 assessment methods were calculated. The 3 evaluation methods demonstrated

Performance of A Compact Multi-crystal High-purity Germanium Detector Array for Measuring Coincident Gamma-ray Emissions

Energy Technology Data Exchange (ETDEWEB)

Howard, Chris [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Daigle, Stephen [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Buckner, Matt [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Erikson, Luke E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Runkle, Robert C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stave, Sean C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Champagne, Art [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Cooper, Andrew [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Downen, Lori [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Glasgow, Brian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kelly, Keegan [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States); Sallaska, Anne [Univ. of North Carolina, Chapel Hill, NC (United States); Triangle Univ. Nuclear Lab., Durham, NC (United States)

2015-02-18

The Multi-sensor Airborne Radiation Survey (MARS) detector is a 14-crystal array of high-purity germanium (HPGe) detectors housed in a single cryostat. The array was used to measure the astrophysical S-factor for the ¹⁴N(p,γ)¹⁵O* reaction for several transition energies at an effective center of mass energy of 163 keV. Owing to the segmented nature of the MARS detector, the effect of gamma-ray summing was greatly reduced in comparison to past experiments which utilized large, single-crystal detectors. The new S-factor values agree within the uncertainties with the past measurements. Details of the analysis and detector performance will be presented.

Performance of a compact multi-crystal high-purity germanium detector array for measuring coincident gamma-ray emissions

Energy Technology Data Exchange (ETDEWEB)

Howard, Chris; Daigle, Stephen; Buckner, Matt [University of North Carolina at Chapel Hill, Chapel Hill, NC 27599 (United States); Triangle Universities Nuclear Laboratory, Durham, NC 27708 (United States); Erikson, Luke E.; Runkle, Robert C. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Stave, Sean C., E-mail: Sean.Stave@pnnl.gov [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Champagne, Arthur E.; Cooper, Andrew; Downen, Lori [University of North Carolina at Chapel Hill, Chapel Hill, NC 27599 (United States); Triangle Universities Nuclear Laboratory, Durham, NC 27708 (United States); Glasgow, Brian D. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States); Kelly, Keegan; Sallaska, Anne [University of North Carolina at Chapel Hill, Chapel Hill, NC 27599 (United States); Triangle Universities Nuclear Laboratory, Durham, NC 27708 (United States)

2015-05-21

The Multi-sensor Airborne Radiation Survey (MARS) detector is a 14-crystal array of high-purity germanium (HPGe) detectors housed in a single cryostat. The array was used to measure the astrophysical S-factor for the {sup 14}N(p,γ){sup 15}O{sup ⁎} reaction for several transition energies at an effective center-of-mass energy of 163 keV. Owing to the granular nature of the MARS detector, the effect of gamma-ray summing was greatly reduced in comparison to past experiments which utilized large, single-crystal detectors. The new S-factor values agree within their uncertainties with the past measurements. Details of the analysis and detector performance are presented.

Production of plastic scintillation survey meter for clearance verification measurement

International Nuclear Information System (INIS)

Tachibana, Mitsuo; Shiraishi, Kunio; Ishigami, Tsutomu; Tomii, Hiroyuki

2008-03-01

In the Nuclear Science Research Institute, the decommissioning of various nuclear facilities is carried out according to the plan for meeting the midterm goal of the Japan Atomic Energy Agency (JAEA). An increase in the clearance verification measurement of concrete on buildings and the radiation measurement for releasing controlled areas will be expected along with the dismantlement of nuclear facilities in the future. The radiation measurement for releasing controlled areas has been carried out in small-scale nuclear facilities including the JPDR (Japan Power Demonstration Reactor). However, the radiation measurement with an existing measuring device was difficult in effects of radiation from radioactive materials that remains in buried piping. On the other hand, there is no experience that the clearance verification measurement is executed in the JAEA. The generation of a large amount of clearance object will be expected along with the decommissioning of the nuclear facilities in the future. The plastic scintillation survey meter (hereafter, 'PL measuring device') was produced to apply to the clearance verification measurement and the radiation measurement for releasing controlled areas. The basic characteristic test and the actual test were confirmed using the PL measuring device. As a result of these tests, it was found that the evaluation value of radioactivity with the PL measuring device was accuracy equal with the existing measuring device. The PL measuring device has feature of the existing measuring device with a light weight and easy operability. The PL measuring device can correct the gamma ray too. The PL measuring device is effective to the clearance verification measurement of concrete on buildings and the radiation measurement for releasing controlled areas. (author)

Feasibility of quantitative performance measures for evaluating nuclear power plant operators

International Nuclear Information System (INIS)

Carter, R.J.; Connelly, E.M.; Krois, P.A.

1989-01-01

A more valid measure of team performance in nuclear power plants is needed. A study is described which was oriented towards evaluating the feasibility of synthesizing performance measures by deriving measures for crews responding to an off-normal event in a full-scope simulator. The thesis was that performance assessment is based on the subjective judgment of training instructors. The procedure used to synthesize the performance measure consisted of: identification of the factors believed to be important to performance assessment, development of example crew performances and ratings on each by instructors, and derivation of the measure by capturing the instructors' assessment rules. A performance measure was derived which explains nearly all of the variance of the instructors' team performance assessments. There is reason to believe that this method of synthesizing measures can be applied to other events. 7 tabs

Outcome measures in European patients with haemophilia: Survey of implementation in routine clinical practice, perception of relevance and recommendations by European treaters in the EHTSB.

Science.gov (United States)

Hermans, C; Klamroth, R; Richards, M; de Moerloose, P; Garrido, R P

2017-03-01

This study was conducted to evaluate the current implementation of outcome measures in routine clinical haemophilia practice and to explore and appreciate the perception of the relevance of such measures by treaters. A survey was completed by 19 of the 26 physicians involved in the European Haemophilia Therapy Strategy Board (EHTSB). Employing an extensive inventory of outcome measures used in patients with haemophilia, information was collected about the frequency of data collection and the subjective appreciation of their importance during clinic review. The survey revealed that most treaters currently collect data that are mainly related to the haemostatic treatment (consumption of concentrates) and the bleeding symptoms (number and location of bleeds) in a non-uniform and non-standardized way. By contrast, functional, physical and quality of life scorings are rarely used and show considerable heterogeneity between treaters. Also, many disparities emerged between practice and perception, in particular quality of life data that are perceived as being important but for most of the time are not collected. This survey represents, in our view, the first attempt to evaluate the actual utilization of outcome measures in haemophilia care. While the value of outcome measures is appreciated, they are not assessed regularly. Therefore, there is a need to include appropriate performance indicators (outcome measures) of haemophilia care in routine clinical practice. Consensus recommendations to provide a framework for achieving this aim are provided. © 2016 John Wiley & Sons Ltd.

Response Burden in Official Business Surveys: Measurement and Reduction Practices of National Statistical Institutes

Directory of Open Access Journals (Sweden)

Bavdaž Mojca

2015-12-01

Full Text Available Response burden in business surveys has long been a concern for National Statistical Institutes (NSIs for three types of reasons: political reasons, because response burden is part of the total administrative burden governments impose on businesses; methodological reasons, because an excessive response burden may reduce data quality and increase data-collection costs; and strategic reasons, because it affects relations between the NSIs and the business community. This article investigates NSI practices concerning business response burden measurement and reduction actions based on a survey of 41 NSIs from 39 countries. Most NSIs monitor at least some burden aspects and have implemented some actions to reduce burden, but large differences exist between NSIs’ methodologies for burden measurement and actions taken to reduce burden. Future research should find ways to deal with methodological differences in burden conceptualization, operationalization, and measurement, and provide insights into the effectiveness and efficiency of burden-reduction actions.

Hospital network performance: a survey of hospital stakeholders' perspectives.

Science.gov (United States)

Bravi, F; Gibertoni, D; Marcon, A; Sicotte, C; Minvielle, E; Rucci, P; Angelastro, A; Carradori, T; Fantini, M P

2013-02-01

Hospital networks are an emerging organizational form designed to face the new challenges of public health systems. Although the benefits introduced by network models in terms of rationalization of resources are known, evidence about stakeholders' perspectives on hospital network performance from the literature is scanty. Using the Competing Values Framework of organizational effectiveness and its subsequent adaptation by Minvielle et al., we conducted in 2009 a survey in five hospitals of an Italian network for oncological care to examine and compare the views on hospital network performance of internal stakeholders (physicians, nurses and the administrative staff). 329 questionnaires exploring stakeholders' perspectives were completed, with a response rate of 65.8%. Using exploratory factor analysis of the 66 items of the questionnaire, we identified 4 factors, i.e. Centrality of relationships, Quality of care, Attractiveness/Reputation and Staff empowerment and Protection of workers' rights. 42 items were retained in the analysis. Factor scores proved to be high (mean score>8 on a 10-item scale), except for Attractiveness/Reputation (mean score 6.79), indicating that stakeholders attach a higher importance to relational and health care aspects. Comparison of factor scores among stakeholders did not reveal significant differences, suggesting a broadly shared view on hospital network performance. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Measuring the Non-Observed Economy: A Survey-Based Study of Demand in the Korean Prostitution Market

OpenAIRE

KIM, WONSOON

2013-01-01

Illegal activities are by their nature difficult to measure, despite the potentially important role they play in the economy. Their inclusion in Korea’s GDP is necessary to reflect Korea’s national economy more precisely. In this paper, I use a variety of survey methods to provide an estimate of the incidence of prostitution. I estimate the demand for prostitution services in Korea by conducting stratified random sampling surveys of 671 Korean adult males. Because the survey topic was sensiti...

Can i just check...? Effects of edit check questions on measurement error and survey estimates

NARCIS (Netherlands)

Lugtig, Peter; Jäckle, Annette

2014-01-01

Household income is difficult to measure, since it requires the collection of information about all potential income sources for each member of a household.Weassess the effects of two types of edit check questions on measurement error and survey estimates: within-wave edit checks use responses to

Geothermal survey handbook

Energy Technology Data Exchange (ETDEWEB)

1974-01-01

The objective of this handbook is to publicize widely the nature of geothermal surveys. It covers geothermal survey planning and measurement as well as measurement of thermal conductivity. Methods for the detection of eruptive areas, the measurement of radiative heat using snowfall, the measurement of surface temperature using infrared radiation and the measurement of thermal flow are described. The book also contains information on physical detection of geothermal reservoirs, the measurement of spring wells, thermographic measurement of surface heat, irregular layer surveying, air thermographics and aerial photography. Isotope measurement techniques are included.

Coming up short on nonfinancial performance measurement.

Science.gov (United States)

Ittner, Christopher D; Larcker, David F

2003-11-01

Companies in increasing numbers are measuring customer loyalty, employee satisfaction, and other nonfinancial areas of performance that they believe affect profitability. But they've failed to relate these measures to their strategic goals or establish a connection between activities undertaken and financial outcomes achieved. Failure to make such connections has led many companies to misdirect their investments and reward ineffective managers. Extensive field research now shows that businesses make some common mistakes when choosing, analyzing, and acting on their nonfinancial measures. Among these mistakes: They set the wrong performance targets because they focus too much on short-term financial results, and they use metrics that lack strong statistical validity and reliability. As a result, the companies can't demonstrate that improvements in nonfinancial measures actually affect their financial results. The authors lay out a series of steps that will allow companies to realize the genuine promise of nonfinancial performance measures. First, develop a model that proposes a causal relationship between the chosen nonfinancial drivers of strategic success and specific outcomes. Next, take careful inventory of all the data within your company. Then use established statistical methods for validating the assumed relationships and continue to test the model as market conditions evolve. Finally, base action plans on analysis of your findings, and determine whether those plans and their investments actually produce the desired results. Nonfinancial measures will offer little guidance unless you use a process for choosing and analyzing them that relies on sophisticated quantitative and qualitative inquiries into the factors actually contributing to economic results.

Does ICT influence supply chain management and performance? A review of survey-based research

NARCIS (Netherlands)

Zhang, Xuan; van Donk, Dirk Pieter; van der Vaart, Taco

2011-01-01

Purpose - The purpose of this paper is to review and classify survey-based research connecting information and communication technology (ICT), supply chain management (SCM), and supply chain (SC) performance. The review evaluates present empirical results and aims at detecting explanations for

The Horonobe Underground Research Laboratory (Tentative name) Project. A program on survey and research performed from earth surface

International Nuclear Information System (INIS)

2001-03-01

The Horonobe Underground Research Laboratory (Tentative name) Project under planning at Horonobe-machi by the Japan Nuclear Cycle Development Institute (JNC) is a research facility on deep underground shown in the Long-term program on research, development and application of nuclear energy (June, 1994)' (LPNE), where some researches on the deep underground targeted at sedimentary rocks are carried out. The plan on The Horonobe Underground Research Laboratory performed at Horonobe-machi' is an about 20 years plan ranging from beginning to finishing of its survey and research, which is carried out by three steps such as 'Survey and research performed from earth surface', 'Survey and research performed under excavation of road', and Survey and research performed by using the road'. The Horonobe Underground Research Laboratory is one of research facilities on deep underground shown its importance in LPNE, and carries out some researches on the deep underground at a target of the sedimentary rocks. And also The Horonobe Underground Research Laboratory confirms some technical reliability and support on stratum disposal shown in the 'Technical reliability on stratum disposal of the high level radioactive wastes. The Second Progress Report of R and D on geological disposal' summarized on November, 1999 by JNC through actual tests and researches at the deep stratum. The obtained results are intended to reflect to disposal business of The Horonobe Underground Research Laboratory and safety regulation and so on performed by the government, together with results of stratum science research, at the Tono Geoscience Center, of geological disposal R and D at the Tokai Works, or of international collaborations. For R and D at the The Horonobe Underground Research Laboratory after 2000, following subjects are shown: 1) Survey technique on long-term stability of geological environment, 2) Survey technique on geological environment, 3) Engineering technique on engineered barrier and

The use of performance measurement systems in the public sector: effects on performance

NARCIS (Netherlands)

Speklé, R.; Verbeeten, F.H.M.

2014-01-01

We study the use of performance measurement systems in the public sector. We hypothesize that the way in which these systems are being used affects organizational performance, and that these performance effects depend on contractibility. Contractibility encompasses clarity of goals, the ability to

Environmental Measurements Laboratory 2002 Unit Performance Plan

Energy Technology Data Exchange (ETDEWEB)

None

2001-10-01

This EML Unit Performance Plan provides the key goals and performance measures for FY 2002 and continuing to FY 2003. The purpose of the Plan is to inform EML's stakeholders and customers of the Laboratory's products and services, and its accomplishments and future challenges. Also incorporated in the Unit Performance Plan is EML's Communication Plan for FY 2002.

Performance measures for metropolitan planning organizations.

Science.gov (United States)

2012-04-01

Performance measurement is a topic of increasing importance to transportation agencies, as issues with : funding shortfalls and concerns about transportation system efficiency lead to a shift in how transportation : decision making is carried out. In...

2010 Survey on cell phone use while performing cardiopulmonary bypass.

Science.gov (United States)

Smith, T; Darling, E; Searles, B

2011-09-01

Cell phone use in the U.S. has increased dramatically over the past decade and text messaging among adults is now mainstream. In professions such as perfusion, where clinical vigilance is essential to patient care, the potential distraction of cell phones may be especially problematic. However, the extent of this as an issue is currently unknown. Therefore, the purpose of this study was to (1) determine the frequency of cell phone use in the perfusion community, and (2) to identify concerns and opinions among perfusionists regarding cell phone use. In October 2010, a link to a 19-question survey (surveymonkey.com) was posted on the AmSECT (PerfList) and Perfusion.com (PerfMail) forums. There were 439 respondents. Demographic distribution is as follows; Chief Perfusionist (30.5%), Staff Perfusionist (62.0%), and Other (7.5%), with age ranges of 20-30 years (14.2%), 30-40 years (26.5%), 40-50 years (26.7%), 50-60 years (26.7%), >60 years (5.9%). The use of a cell phone during the performance of cardiopulmonary bypass (CPB) was reported by 55.6% of perfusionists. Sending text messages while performing CPB was acknowledged by 49.2%, with clear generational differences detected when cross-referenced with age groups. For smart phone features, perfusionists report having accessed e-mail (21%), used the internet (15.1%), or have checked/posted on social networking sites (3.1%) while performing CPB. Safety concerns were expressed by 78.3% who believe that cell phones can introduce a potentially significant safety risk to patients. Speaking on a cell phone and text messaging during CPB are regarded as "always an unsafe practice" by 42.3% and 51.7% of respondents, respectively. Personal distraction by cell phone use that negatively affected performance was admitted by 7.3%, whereas witnessing another perfusionist distracted with phone/text while on CPB was acknowledged by 33.7% of respondents. This survey suggests that the majority of perfusionists believe cell phones raise

Rapid Survey For Measuring The Level And Causes Of Maternal Mortality

Directory of Open Access Journals (Sweden)

Kumar Rajesh

1997-01-01

Full Text Available Research question: What is the extent of problem of maternal mortality in a given population? Objective: 1. To evolve a rapid survey methodology aimed at measuring maternal mortality ratio. 2. To find out the probable medical causes of maternal deaths and behavioural factors associated with them. Study Design: cross- sectional. Setting: Urban and rural areas of district Mohindergarh, Haryana. Participants: Members of families in which a maternal death had taken place in last 12 months. Sample size: All 275 deaths among women 15-44 years occurring in the district from 1st April 95 to 31st March 96. Study variables: Age, gravida, parity, literacy, caste, land holding, health care facilities, distance from health centers, mode of conveyance. Statistical Analysis: Rates and ratios. Results: Maternal mortality ratio was estimated to be 275 per 100,000 live births (298 rural and 82 urban. Major causes of death were â€" sepsis(30%, haemorrhage (21%, abortion(5%, eclampsia (3% and obstructed labour(3%. Twenty-nine causes of deaths occurred at home and 26% on way to hospital. Out of 59(93.7% cases who could avail medical consultation, 61% arranged it within five hours after onset of symptoms, and 78% availed two, 21% three, and 11% four consulations. The survey was completed in three months at a cost of Rs. 54,000. Recommendations: Such rapid surveys should be carried out periodically (every 4-5 years to monitor the progress in maternal health. Staff of heath deptt. Should be involved in carrying out these surveys. This will not only help in reducing cost of the survey but information about specific problems of maternal mortality in the area can be utilized by health staff for taking appropriate action to improve maternal health care.

Frequency Control Performance Measurement and Requirements

Energy Technology Data Exchange (ETDEWEB)

Illian, Howard F.

2010-12-20

Frequency control is an essential requirement of reliable electric power system operations. Determination of frequency control depends on frequency measurement and the practices based on these measurements that dictate acceptable frequency management. This report chronicles the evolution of these measurements and practices. As technology progresses from analog to digital for calculation, communication, and control, the technical basis for frequency control measurement and practices to determine acceptable performance continues to improve. Before the introduction of digital computing, practices were determined largely by prior experience. In anticipation of mandatory reliability rules, practices evolved from a focus primarily on commercial and equity issues to an increased focus on reliability. This evolution is expected to continue and place increased requirements for more precise measurements and a stronger scientific basis for future frequency management practices in support of reliability.

From Performance Measurement to Strategic Management Model: Balanced Scorecard

Directory of Open Access Journals (Sweden)

Cihat Savsar

2015-03-01

Full Text Available Abstract: In Today’s competitive markets, one of the main conditions of the surviving of enterprises is the necessity to have effective performance management systems. Decisions must be taken by the management according to the performance of assets. In the transition from industrial society to information society, the presence of business structures have changed and the values of non-financial assets have increased in this period. So some systems have emerged based on intangible assets and to measure them instead of tangible assets and their measurements. With economic and technological development multi-dimensional evaluation in the business couldn’t be sufficient.  Performance evaluation methods can be applied in business with an integrated approach by its accordance with business strategy, linking to reward system and cause effects link established between performance measures. Balanced scorecard is one of the commonly used in measurement methods. While it was used for the first time in 1992 as a performance measurement tool today it has been used as a strategic management model besides its conventional uses. BSC contains customer perspective, internal perspective and learning and growth perspective besides financial perspective. Learning and growth perspective is determinant of other perspectives. In order to achieve the objectives set out in the financial perspective in other dimensions that need to be accomplished, is emphasized. Establishing a causal link between performance measures and targets how to achieve specified goals with strategy maps are described.

Proposed system for measuring project performance using process-based key performance indicators

NARCIS (Netherlands)

Haponava, T.; Al-Jibouri, Saad H.S.

2012-01-01

Despite some evidence of its usefulness, performance measurement by using Key Performance Indicators (KPIs) in the construction industry also has its critics. Among the shortcomings attributed to existing KPIs is the fact that almost all of them are product oriented. This means that the indicators

Product, Organizational and Performance Effects of Product Modularity

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth

2014-01-01

beyond these industries. To be able to establish whether firms not part of these industries would experience the same performance effects, survey research will be needed. To support future survey research, this paper proposes an operationalization of product modularity and details the link between...... product modularity and firm performance, to support the future development of measures and hypotheses....

Proposing a survey instrument for measuring operational, formal, information and strategic Internet skills

NARCIS (Netherlands)

van Deursen, Alexander Johannes Aloysius Maria; van Dijk, Johannes A.G.M.; Peters, O.

2012-01-01

Observational studies prove to be very suitable to provide a realistic view of people's Internet skills. However, their cost and time are a strong limitation for large-scale data gathering. A useful addition to the measurement of Internet skills would be the development of survey questions for

Patients With Thumb Carpometacarpal Arthritis Have Quantifiable Characteristic Expectations That Can Be Measured With a Survey.

Science.gov (United States)

Kang, Lana; Hashmi, Sohaib Z; Nguyen, Joseph; Lee, Steve K; Weiland, Andrew J; Mancuso, Carol A

2016-01-01

Although patient expectations associated with major orthopaedic conditions have shown clinically relevant and variable effects on outcomes, expectations associated with thumb carpometacarpal (CMC) arthritis have not been identified, described, or analyzed before, to our knowledge. We asked: (1) Do patients with thumb CMC arthritis express characteristic expectations that are quantifiable and have measurable frequency? (2) Can a survey on expectations developed from patient-derived data quantitate expectations in patients with thumb CMC arthritis? The study was a prospective cohort study. The first phase was a 12-month-period involving interviews of 42 patients with thumb CMC arthritis to define their expectations of treatment. The interview process used techniques and principles of qualitative methodology including open-ended interview questions, unrestricted time, and study size determined by data saturation. Verbatim responses provided content for the draft survey. The second phase was a 12-month period assessing the survey for test-retest reliability with the recruitment of 36 participants who completed the survey twice. The survey was finalized from clinically relevant content, frequency of endorsement, weighted kappa values for concordance of responses, and intraclass coefficient and Cronbach's alpha for interrater reliability and internal consistency. Thirty-two patients volunteered 256 characteristic expectations, which consisted of 21 discrete categories. Expectations with similar concepts were combined by eliminating redundancy while maintaining original terminology. These were reduced to 19 items that comprised a one-page survey. This survey showed high concordance, interrater reliability, and internal consistency, with weighted kappa values between 0.58 and 0.78 (95% CI, 0.39-0.78; p Patients with thumb CMC arthritis volunteer a characteristic and quantifiable set of expectations. Using responses recorded verbatim from patient interviews, a clinically

A critical perspective on the measurement of performance in the empirical multinationality and performance literature

DEFF Research Database (Denmark)

Richter, Nicole Franziska; Schmidt, Robert; Ladwig, Tina J.

2017-01-01

used in empirical studies and the underlying theoretical streams that explain the effects on benefits and costs of multinationality. Our findings indicate that authors still largely rely on overall financial performance measures. Theoretical arguments, in contrast, refer to specific benefit and cost......This paper contributes to the core research in international business (IB), namely the relation between multinationality and performance, and is concerned with the quality of past empirical research designs. On the basis of 49 studies, we critically evaluate the match between performance measures...... positions that are better reflected in operational performance indicators. In our view, the idiosyncratic choice of the performance measures contributes to the varying results in past studies. We offer suggestions for improving future research designs....

A Subaru galaxy redshift survey: WFMOS survey

International Nuclear Information System (INIS)

Takada, M

2008-01-01

A planned galaxy redshift survey with the Subaru 8.2m telescope, the WFMOS survey, offers a unique opportunity for probing detailed properties of large-scale structure formation in the expanding universe by measuring clustering strength of galaxy distribution as a function of distance scale and redshift. In particular, the precise measurement of the galaxy power spectrum, combined with the cosmic microwave background experiments, allows us to obtain stringent constraints on or even determine absolute mass scales of the Big-Bang relic neutrinos as the neutrinos imprint characteristic scale- and redshift-dependent modifications onto the galaxy power spectrum shape. Here we describe the basic concept of how the galaxy clustering measurement can be used to explore the neutrino masses, with particular emphasis on advantages of the WFMOS survey over the existing low-redshift surveys such as SDSS

Practical methods for radiation survey in nuclear installations

International Nuclear Information System (INIS)

Shweikani, R.

2001-12-01

This study is placed to those who are responsible to perform radiation survey in the nuclear installations, especially the beginners. Therefore, it gives a comprehensive view to all-important aspects related to their work starting from the structure of atoms to the practical steps for radiation survey works. So, it clarify how to perform personal monitoring, methods for monitoring surface contamination, methods for measuring radioactivity of gases and radioactive aerosols in air, monitoring radiation doses, measuring radiation influences in workplaces and finally measuring internal exposure of radiation workers in nuclear installations. Finally, The study shows some cases of breaches of radiation protection rules in some American nuclear installations and describes the final results of these breaches. The aim of this is to assure that any breach or ignore to radiation protection principles may produce bad results, and there is no leniency in implementing environmental radiation protection principles. (author)

GLACIER MONITORING SYSTEM IN COLOMBIA - complementing glaciological measurements with laser-scanning and ground-penetrating radar surveys

Science.gov (United States)

Ceballos, Jorge; Micheletti, Natan; Rabatel, Antoine; Mölg, Nico; Zemp, Michael

2015-04-01

Colombia (South America) has six small glaciers (total glacierized area of 45 Km2); their geographical location, close to zero latitude, makes them very sensitive to climate changes. An extensive monitoring program is being performed since 2006 on two glaciers, with international cooperation supports. This presentation summarizes the results of glacier changes in Colombia and includes the latest results obtained within the CATCOS Project - Phase 1 (Capacity Building and Twinning for Climate Observing Systems) signed between Colombia and Switzerland, and within the Joint Mixte Laboratory GREAT-ICE (IRD - France), with the application of LiDAR technology and GPR-based ice thickness measurements at Conejeras Glacier. Conejeras Glacier (Lat. N. 4° 48' 56"; Long. W. 75° 22' 22"; Alt. Max. 4915m.; Alt. Min. 4730m. Area 0.2 Km2) is located on the north-western side of Santa Isabel Volcano. This glacier belongs to global glacier monitoring network of the World Glacier Monitoring Service (WGMS-ID: 2721). The surface mass balance is calculated monthly using the direct glaciological method. Between April 2006 and May 2014, Conejeras Glacier showed a cumulative loss of -21 m w.e. The CATCOS Project allowed to improve the glacier monitoring system in Colombia with two main actions: (1) a terrestrial laser scanner survey (RIEGL VZ-6000 terrestrial laser scanner, property of Universities of Lausanne and Fribourg); and (2) ice thickness measurements (Blue System Integration Ltd. Ice Penetrating Radar of property of IRD). The terrestrial laser-scanning survey allowed to realize an accurate digital terrain model of the glacier surface with 13 million points and a decimetric resolution. Ice thickness measurements showed an average glacier thickness of 22 meters and a maximum of 52 meters.

Effects of procurement on project performance:a survey of Swedish construction clients

OpenAIRE

Eriksson, Per-Erik; Vennström, Anders

2009-01-01

In order to increase the efficiency of the construction industry development and improvement of procurement procedures is vital. The purpose of this investigation is to increase the understanding of how procurement procedures affect project performance. A procurement model including eight hypotheses is first developed on the basis of a literature review and then tested through multivariate statistical techniques based on empirical data collected through a survey investigation of 106 Swedish c...

Holistic Performance Measurement to Achieve Sustainable Competitive Advantage

OpenAIRE

Keni Keni

2013-01-01

In the past, companies used balanced scorecard to measure its performance. Now, balanced scorecard as a performance measurement tool is no longer sufficient because business has been affected by changes to the natural environment and developing social expectations. In order to achieve sustainable competitive advantage, companies are beginning to address the risks and opportunities associated with these changes in their longer-term business planning. To turn risks into opportunities, companies...

Smart city performance measurement framework. CITYkeys

NARCIS (Netherlands)

Airaksinen, M.; Seppa, I.P.; Huovilla, A.; Neumann, H.M.; Iglar, B.; Bosch, P.R.

2017-01-01

This paper presents a holistic performance measurement framework for harmonized and transparent monitoring and comparability of the European cities activities during the implementation of Smart City solutions. The work methodology was based on extensive collaboration and communication with European

SNOW THICKNESS ON AUSTRE GRØNFJORDBREEN, SVALBARD, FROM RADAR MEASUREMENTS AND STANDARD SNOW SURVEYS

Directory of Open Access Journals (Sweden)

I. I. Lavrentiev

2018-01-01

Full Text Available Summary Comparison of two methods of measurements of snow cover thickness on the glacier Austre Grønfjordbreen, Svalbard was performed in the spring of 2014. These methods were the radar (500 MHz observations and standard snow surveys. Measurements were conducted in 77 different points on the surface of the glacier. A good correlation (R2 = 0.98 was revealed. In comparison with the data of snow surveys, the radar measurements show a similar but more detailed pattern of the distribution of the snow cover depth. The discrepancy between the depths of snow cover on maps plotted from data of both methods did not exceed 30 cm in most parts of the glacier. The standard error of interpolation of the radar data onto the entire glacier surface amounts, on average, to 18 cm. This corresponds to the error of radar measurements of 18.8% when an average snow depth is about 160 cm and 9.4% at its maximum thickness of 320 cm. The distance between the measurement points at which the spatial covariance of the snow depth disappears falls between 236 and 283 m along the glacier, and between 117 and 165 m across its position. We compared the results of radar measurements of the pulse-delay time of reflections from the base of the snow cover with the data of manual probe measurements at 10 points and direct measurements of snow depth and average density in 12 snow pits. The average speed of radio waves propagation in the snow was determined as Vcr = 23.4±0.2 cm ns−1. This magnitude and the Looyenga and Kovacs formulas allowed estimating the average density of snow cover ρL = 353.1±13.1 kg m−3 and ρK = 337.4±12.9 kg m−3. The difference from average density measured in 12 pits ρav.meas = 387.4±12.9 kg m−3 amounts to −10.8% and −14.8%. In 2014, according to snow and radar measurements, altitudinal gradient of snow accumulation on the glacier Austre Grønfjordbreen was equal to 0.21 m/100 m, which is smaller than the

Designing a performance measurement system: A case study

NARCIS (Netherlands)

Lohman, Clemens; Fortuin, Leonard; Wouters, Marc

2004-01-01

Performance measurement (PM) by means of local performance indicators (PIs) is developing into performance management at a company-wide scale. But how should PIs at various levels in the organization be incorporated into one system that can help managers, working at levels that range from

Designing a performance measurement system : a case study

NARCIS (Netherlands)

Lohman, C.T.M.; Fortuin, L.; Wouters, M.J.F.

2004-01-01

Performance measurement (PM) by means of local performance indicators (PIs) is developing into performance management at a company-wide scale. But how should PIs at various levels in the organization be incorporated into one system that can help managers, working at levels that range from

Procurement performance measurement system in the health care industry.

Science.gov (United States)

Kumar, Arun; Ozdamar, Linet; Ng, Chai Peng

2005-01-01

The rising operating cost of providing healthcare is of concern to health care providers. As such, measurement of procurement performance will enable competitive advantage and provide a framework for continuous improvement. The objective of this paper is to develop a procurement performance measurement system. The paper reviews the existing literature in procurement performance measurement to identify the key areas of purchasing performance. By studying the three components in the supply chain collectively with the resources, procedures and output, a model is been developed. Additionally, a balanced scorecard is proposed by establishing a set of generic measures and six perspectives. A case study conducted at the Singapore Hospital applies the conceptual model to describe the purchasing department and the activities within and outside the department. The results indicate that the material management department has already made a good start in measuring the procurement process through the implementation of the balanced scorecard. There are many data that are collected but not properly collated and utilized. Areas lacking measurement include cycle time of delivery, order processing time, effectiveness, efficiency and reliability. Though a lot of hard work was involved, the advantages of establishing a measurement system outweigh the costs and efforts involved in its implementation. Results of balanced scorecard measurements provide decision-makers with critical information on efficiency and effectiveness of the purchasing department's work. The measurement model developed could be used for any hospital procurement system.

Development of a measure of student self-evaluation of physics exam performance

Science.gov (United States)

Hagedorn, Eric Anthony

The central purpose of this study was to provide preliminary evidence of the reliability and validity of the SEVSI - P (Self- evaluation scaled instrument - physics). This instrument, designed to measure student self-evaluation of physics exam performance, was developed in congruence with social cognitive theory. Self-evaluation in this study is defined to consist of two of the three subprocesses of self-regulation: self-observation and judgmental process. As such, the SEVSI - P consists of two subscales, one measuring the frequency and types of self-observations made during a physics exam and one measuring the frequency and types of judgmental comparisons made after an exam. Data from 621 completed surveys, voluntarily taken by first semester algebra/trigonometry based physics students at six Midwestern universities and one Southern university, were analyzed for reliability and factorial validity. Cronbach alphas of .71 and .83 for the self-observation and judgment subscales, respectively, indicate acceptable reliability for the instrument. Confirmatory factor analysis indicates the acceptability of the hypothesis that the data analyzed could have indeed been obtained from the proposed two factor model (self-observation and judgment). The results of this confirmatory factor analysis provide preliminary construct validity for this instrument. A number of theoretically related items were included on the SEVSI - P form to elicity information about the use of goals and pre-planned strategies, actions taken in response to previous poor performances, and emotional responses to performance. A correlational analysis of these items along with the self-observation and judgment subscale scores provided a limited degree of convergent validity for the two subscales. Analyses of variance were done to determine the presence of differences in scoring patterns based on gender or reported ethnic origin. These results indicate slightly higher judgment subscale scores for women and

CITYkeys Smart city performance measurement system

NARCIS (Netherlands)

Huovila, A.; Airaksinen, M.; Pinto-Seppa, I.; Piira, K.; Bosch, P.R.; Penttinen, T.; Neumann, H.M.; Kontinakis, N.

2017-01-01

Cities are tackling their economic, social and environmental challenges through smart city solutions. To demonstrate that these solutions achieve the desired impact, an indicator-based assessment system is needed. This paper presents the process of developing CITYkeys performance measurement system

Supply chain oriented performance measurement for automotive spare parts

NARCIS (Netherlands)

de Leeuw, S.L.J.M.; Beekman, L.

2008-01-01

Literature provides a number of conceptual frameworks and discussions on performance measurement in supply chains. However, most of these frameworks focus on a single link of a supply chain. Furthermore, there is a lack of empirical analysis and case studies on performance metrics and measurements

Performance measurement system for training simulators. Interim report

International Nuclear Information System (INIS)

Bockhold, G. Jr.; Roth, D.R.

1978-05-01

In the first project phase, the project team has designed, installed, and test run on the Browns Ferry nuclear power plant training simulator a performance measurement system capable of automatic recording of statistical information on operator actions and plant response. Key plant variables and operator actions were monitored and analyzed by the simulator computer for a selected set of four operating and casualty drills. The project has the following objectives: (1) To provide an empirical data base for statistical analysis of operator reliability and for allocation of safety and control functions between operators and automated controls; (2) To develop a method for evaluation of the effectiveness of control room designs and operating procedures; and (3) To develop a system for scoring aspects of operator performance to assist in training evaluations and to support operator selection research. The performance measurement system has shown potential for meeting the research objectives. However, the cost of training simulator time is high; to keep research program costs reasonable, the measurement system is being designed to be an integral part of operator training programs. In the pilot implementation, participating instructors judged the measurement system to be a valuable and objective extension of their abilities to monitor trainee performance

Resources on work zone safety and mobility performance monitoring and measurement.

Science.gov (United States)

2013-01-01

Work zone performance measures are metrics that help quantify how work zones impact travelers, residents, businesses, and workers. Some performance measures describe how an individual work zone impacts these audiences; other performance measures desc...

A Framework of Performance Measurement System for Manufacturing Company

Directory of Open Access Journals (Sweden)

Dermawan Wibisono

2012-04-01

Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decisionmaking, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that canlead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issuesassociated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes animproved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

A Framework of Performance Measurement System for Manufacturing Company

Directory of Open Access Journals (Sweden)

Dermawan Wibisono

2011-10-01

Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decision making, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that can lead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issues associated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes an improved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

In situ performance curves measurements of large pumps

International Nuclear Information System (INIS)

Anton, A

2010-01-01

The complex energetic system on the river Lotru in Romania comprises of a series of lakes and pumping stations and a major hydroelectric power plant: Lotru-Ciunget. All the efforts have been oriented towards the maintenance of the Pelton turbines and very little attention has been directed to the pumps. In the system, there are three large pumping stations and only in the last 5 years, the pump performances have become a concern. The performances where determined using portable ultrasonic flow meters, a Yates meter, precision manometers and appropriate electrical equipment for power measurement (Power Analiser - NORMA D4000 LEM). The measurements are not supposed to interfere with the normal operation so only a limited number of tests could be performed. Based on those tests, portions of the test curves have been measured and represented in specific diagrams.

In situ performance curves measurements of large pumps

Science.gov (United States)

Anton, A.

2010-08-01

The complex energetic system on the river Lotru in Romania comprises of a series of lakes and pumping stations and a major hydroelectric power plant: Lotru-Ciunget. All the efforts have been oriented towards the maintenance of the Pelton turbines and very little attention has been directed to the pumps. In the system, there are three large pumping stations and only in the last 5 years, the pump performances have become a concern. The performances where determined using portable ultrasonic flow meters, a Yates meter, precision manometers and appropriate electrical equipment for power measurement (Power Analiser - NORMA D4000 LEM). The measurements are not supposed to interfere with the normal operation so only a limited number of tests could be performed. Based on those tests, portions of the test curves have been measured and represented in specific diagrams.

Development of a hand-held fast neutron survey meter

International Nuclear Information System (INIS)

Yoshida, T.; Tsujimura, N.; Yamano, T.

2011-01-01

A neutron survey meter with a ZnS(Ag) scintillator to measure recoil protons was built. The detection probe weighs ∼2 kg, therefore providing us with true portability. Performance tests exhibited satisfactory neutron dosimetry characteristics in unmoderated or lightly moderated fission neutron fields and in particular work environments at a mixed oxide fuel facility. This new survey meter will augment a routine of neutron monitoring that is inconveniently being carried out by moderator-based neutron survey meters. (authors)

Measurement of Food Safety Culture using Survey and Maturity Profiling Tools

OpenAIRE

Jespersen, Lone; Griffiths, Mansel; Maclaurin, Tanya; Chapman, Ben; Wallace, Carol A.

2016-01-01

Organizational culture is defined by dimensions and characteristics that can be used to measure food safety culture in food manufacturing through a food safety maturity model. Maturity models from quality, health care, and information technology have been used since early 1970 and this work presents a novel food safety culture maturity model with five capability areas and food safety pinpointed behaviours specific to functions and levels in a food manufacturing company. A survey tool linked t...

A framework to improve performance measurement in engineering projects

OpenAIRE

Zheng , Li; Baron , Claude; Esteban , Philippe; Xue , Rui; Zhang , Qiang

2017-01-01

International audience; A wide range of methods and good practices have been developed for the measurement of projects performance. They help project managers to effectively monitor the project progress and evaluate results. However, from a literature review, we noticed several remaining critical issues in measuring projects performance, such as an unbalanced development of Key Performance Indicators types between lagging and leading indicators. On the other hand, systems engineering measurem...

Documentation of the U.S. Geological Survey Oceanographic Time-Series Measurement Database

Science.gov (United States)

Montgomery, Ellyn T.; Martini, Marinna A.; Lightsom, Frances L.; Butman, Bradford

2008-01-02

The U.S. Geological Survey (USGS) Oceanographic Time-Series Data Collection (previously named the USGS Oceanographic Time-Series Measurement Database) contains oceanographic observations made as part of studies designed to increase understanding of sediment transport processes and associated dynamics. Analysis of these data has contributed to more accurate prediction of the movement and fate of sediments and other suspended materials in the coastal ocean. The measurements were collected primarily by investigators at the USGS Woods Hole Coastal and Marine Science Center (WHCMSC) and colleagues, beginning in 1975. Most of the field experiments were carried out on the U.S. continental shelf and slope.

Improving ability measurement in surveys by following the principles of IRT: The Wordsum vocabulary test in the General Social Survey.

Science.gov (United States)

Cor, M Ken; Haertel, Edward; Krosnick, Jon A; Malhotra, Neil

2012-09-01

Survey researchers often administer batteries of questions to measure respondents' abilities, but these batteries are not always designed in keeping with the principles of optimal test construction. This paper illustrates one instance in which following these principles can improve a measurement tool used widely in the social and behavioral sciences: the GSS's vocabulary test called "Wordsum". This ten-item test is composed of very difficult items and very easy items, and item response theory (IRT) suggests that the omission of moderately difficult items is likely to have handicapped Wordsum's effectiveness. Analyses of data from national samples of thousands of American adults show that after adding four moderately difficult items to create a 14-item battery, "Wordsumplus" (1) outperformed the original battery in terms of quality indicators suggested by classical test theory; (2) reduced the standard error of IRT ability estimates in the middle of the latent ability dimension; and (3) exhibited higher concurrent validity. These findings show how to improve Wordsum and suggest that analysts should use a score based on all 14 items instead of using the summary score provided by the GSS, which is based on only the original 10 items. These results also show more generally how surveys measuring abilities (and other constructs) can benefit from careful application of insights from the contemporary educational testing literature. Copyright © 2012 Elsevier Inc. All rights reserved.

Thermal performance measurements on ATLAS-SCT KB forward modules

CERN Document Server

Donegà, M; D'Onofrio, M; Ferrère, D; Hirt, C; Ikegami, Y; Kohriki, T; Kondo, T; Lindsay, S; Mangin-Brinet, M; Niinikoski, T O; Pernegger, H; Perrin, E; Taylor, G; Terada, S; Unno, Y; Wallny, R; Weber, M

2003-01-01

The thermal design of the KB module is presented. A Finite Elements Analysis (FEA) has been used to finalize the module design. The thermal performance of an outer irradiated KB module has been measured at different cooling conditions. The thermal runaway of the module has been measured. The FEA model has been compared with the measurements and has been used to predict the thermal performance in a realistic SCT scenario.

Testing for Distortions in Performance Measures

DEFF Research Database (Denmark)

Sloof, Randolph; Van Praag, Mirjam

2015-01-01

Distorted performance measures in compensation contracts elicit suboptimal behavioral responses that may even prove to be dysfunctional (gaming). This paper applies the empirical test developed by Courty and Marschke (Review of Economics and Statistics, 90, 428-441) to detect whether the widely...

Testing for Distortions in Performance Measures

DEFF Research Database (Denmark)

Sloof, Randolph; Van Praag, Mirjam

Distorted performance measures in compensation contracts elicit suboptimal behavioral responses that may even prove to be dysfunctional (gaming). This paper applies the empirical test developed by Courty and Marschke (2008) to detect whether the widely used class of Residual Income based performa...

The comprehensive care project: measuring physician performance in ambulatory practice.

Science.gov (United States)

Holmboe, Eric S; Weng, Weifeng; Arnold, Gerald K; Kaplan, Sherrie H; Normand, Sharon-Lise; Greenfield, Sheldon; Hood, Sarah; Lipner, Rebecca S

2010-12-01

To investigate the feasibility, reliability, and validity of comprehensively assessing physician-level performance in ambulatory practice. Ambulatory-based general internists in 13 states participated in the assessment. We assessed physician-level performance, adjusted for patient factors, on 46 individual measures, an overall composite measure, and composite measures for chronic, acute, and preventive care. Between- versus within-physician variation was quantified by intraclass correlation coefficients (ICC). External validity was assessed by correlating performance on a certification exam. Medical records for 236 physicians were audited for seven chronic and four acute care conditions, and six age- and gender-appropriate preventive services. Performance on the individual and composite measures varied substantially within (range 5-86 percent compliance on 46 measures) and between physicians (ICC range 0.12-0.88). Reliabilities for the composite measures were robust: 0.88 for chronic care and 0.87 for preventive services. Higher certification exam scores were associated with better performance on the overall (r = 0.19; pmeasures and by sampling feasible numbers of patients for each condition. © Health Research and Educational Trust.

Insomnia and the performance of US workers: results from the America insomnia survey.

Science.gov (United States)

Kessler, Ronald C; Berglund, Patricia A; Coulouvrat, Catherine; Hajak, Goeran; Roth, Thomas; Shahly, Victoria; Shillington, Alicia C; Stephenson, Judith J; Walsh, James K

2011-09-01

To estimate the prevalence and associations of broadly defined (i.e., meeting full ICD-10, DSM-IV, or RDC/ICSD-2 inclusion criteria) insomnia with work performance net of comorbid conditions in the America Insomnia Survey (AIS). Cross-sectional telephone survey. National sample of 7,428 employed health plan subscribers (ages 18+). None. Broadly defined insomnia was assessed with the Brief Insomnia Questionnaire (BIQ). Work absenteeism and presenteeism (low on-the-job work performance defined in the metric of lost workday equivalents) were assessed with the WHO Health and Work Performance Questionnaire (HPQ). Regression analysis examined associations between insomnia and HPQ scores controlling 26 comorbid conditions based on self-report and medical/pharmacy claims records. The estimated prevalence of insomnia was 23.2%. Insomnia was significantly associated with lost work performance due to presenteeism (χ² (1) = 39.5, P absenteeism (χ² (1) = 3.2, P = 0.07), with an annualized individual-level association of insomnia with presenteeism equivalent to 11.3 days of lost work performance. This estimate decreased to 7.8 days when controls were introduced for comorbid conditions. The individual-level human capital value of this net estimate was $2,280. If we provisionally assume these estimates generalize to the total US workforce, they are equivalent to annualized population-level estimates of 252.7 days and $63.2 billion. Insomnia is associated with substantial workplace costs. Although experimental studies suggest some of these costs could be recovered with insomnia disease management programs, effectiveness trials are needed to obtain precise estimates of return-on-investment of such interventions from the employer perspective.

Measurement Equivalence in ADL and IADL Difficulty Across International Surveys of Aging: Findings From the HRS, SHARE, and ELSA

Science.gov (United States)

Kasper, Judith D.; Brandt, Jason; Pezzin, Liliana E.