A New Performance Improvement Model: Adding Benchmarking to the Analysis of Performance Indicator Data.

Science.gov (United States)

Al-Kuwaiti, Ahmed; Homa, Karen; Maruthamuthu, Thennarasu

2016-01-01

A performance improvement model was developed that focuses on the analysis and interpretation of performance indicator (PI) data using statistical process control and benchmarking. PIs are suitable for comparison with benchmarks only if the data fall within the statistically accepted limit-that is, show only random variation. Specifically, if there is no significant special-cause variation over a period of time, then the data are ready to be benchmarked. The proposed Define, Measure, Control, Internal Threshold, and Benchmark model is adapted from the Define, Measure, Analyze, Improve, Control (DMAIC) model. The model consists of the following five steps: Step 1. Define the process; Step 2. Monitor and measure the variation over the period of time; Step 3. Check the variation of the process; if stable (no significant variation), go to Step 4; otherwise, control variation with the help of an action plan; Step 4. Develop an internal threshold and compare the process with it; Step 5.1. Compare the process with an internal benchmark; and Step 5.2. Compare the process with an external benchmark. The steps are illustrated through the use of health care-associated infection (HAI) data collected for 2013 and 2014 from the Infection Control Unit, King Fahd Hospital, University of Dammam, Saudi Arabia. Monitoring variation is an important strategy in understanding and learning about a process. In the example, HAI was monitored for variation in 2013, and the need to have a more predictable process prompted the need to control variation by an action plan. The action plan was successful, as noted by the shift in the 2014 data, compared to the historical average, and, in addition, the variation was reduced. The model is subject to limitations: For example, it cannot be used without benchmarks, which need to be calculated the same way with similar patient populations, and it focuses only on the "Analyze" part of the DMAIC model.

The better model to predict and improve pediatric health care quality: performance or importance-performance?

Science.gov (United States)

Olsen, Rebecca M; Bryant, Carol A; McDermott, Robert J; Ortinau, David

2013-01-01

The perpetual search for ways to improve pediatric health care quality has resulted in a multitude of assessments and strategies; however, there is little research evidence as to their conditions for maximum effectiveness. A major reason for the lack of evaluation research and successful quality improvement initiatives is the methodological challenge of measuring quality from the parent perspective. Comparison of performance-only and importance-performance models was done to determine the better predictor of pediatric health care quality and more successful method for improving the quality of care provided to children. Fourteen pediatric health care centers serving approximately 250,000 patients in 70,000 households in three West Central Florida counties were studied. A cross-sectional design was used to determine the importance and performance of 50 pediatric health care attributes and four global assessments of pediatric health care quality. Exploratory factor analysis revealed five dimensions of care (physician care, access, customer service, timeliness of services, and health care facility). Hierarchical multiple regression compared the performance-only and the importance-performance models. In-depth interviews, participant observations, and a direct cognitive structural analysis identified 50 health care attributes included in a mailed survey to parents(n = 1,030). The tailored design method guided survey development and data collection. The importance-performance multiplicative additive model was a better predictor of pediatric health care quality. Attribute importance moderates performance and quality, making the importance-performance model superior for measuring and providing a deeper understanding of pediatric health care quality and a better method for improving the quality of care provided to children. Regardless of attribute performance, if the level of attribute importance is not taken into consideration, health care organizations may spend valuable

The effectiveness of external sensory cues in improving functional performance in individuals with Parkinson's disease: a systematic review with meta-analysis.

Science.gov (United States)

Cassimatis, Constantine; Liu, Karen P Y; Fahey, Paul; Bissett, Michelle

2016-09-01

A systematic review with meta-analysis was performed to investigate the effect external sensory cued therapy on activities of daily living (ADL) performance that include walking and daily tasks such as dressing for individuals with Parkinson's disease (PD). A detailed computer-aided search of the literature was applied to MEDLINE, Cumulative Index to Nursing and Allied Health Literature, EMBASE and PubMed. Studies investigating the effects of external sensory cued therapy on ADL performance for individuals with PD in all stages of disease progression were collected. Relevant articles were critically reviewed and study results were synthesized by two independent researchers. A data-analysis method was used to extract data from selected articles. A meta-analysis was carried out for all randomized-controlled trials. Six studies with 243 individuals with PD were included in this review. All six studies yielded positive findings in favour of external sensory cues. The meta-analysis showed that external sensory cued therapy improved statistically after treatment (P=0.011) and at follow-up (Psensory into a training programme focused on improving daily task performance.

Improving fleet performance

International Nuclear Information System (INIS)

Ramjist, S.

2015-01-01

Use Fleet Initiatives to Improve Overall Fleet Performance . Tightly Integrated with Business Planning (Cause & Effect) . Leverage Strength of Broader Organization - Converge on Standard Business Practices . Ancillary Benefit of Improved Agility.

Improving fleet performance

Energy Technology Data Exchange (ETDEWEB)

Ramjist, S. [Ontario Power Generation, Toronto, ON (Canada)

2015-07-01

Use Fleet Initiatives to Improve Overall Fleet Performance . Tightly Integrated with Business Planning (Cause & Effect) . Leverage Strength of Broader Organization - Converge on Standard Business Practices . Ancillary Benefit of Improved Agility.

Supplier Performance Monitoring and Improvement (SPMI through SIPOC Analysis and PDCA Model to the ISO 9001 QMS in Sports Goods Manufacturing Industry

Directory of Open Access Journals (Sweden)

2011-12-01

Full Text Available Background: Increasing global competition and customer expectations are forcing companies to improve their supplier performance as part of their supply chain governance initiative. A sport goods manufacturing industry is intensive supplier base industry and majority of these comes under small medium enterprises with limited resources. Developing an easy - deploy, cost effective and result oriented frame work for this industry is a critical business competency. Methods: This paper lays out a framework - a "standard operating system" - for continuous supplier performance monitoring and improvement (SPMI and is composed of following sections. In the first section supplier performance monitoring and improvement is overviewed with its basic concepts, and then improvement methods used in the paper are explained based on literature review. The third and fourth section focus on the methodology, explaining the way of SIPOC Analysis and PDCA application with using ISO 9001; 2008 QMS standards and example showing its results. Results: The existing process of Supplier Performance Monitoring and Improvement (SPMI was defined and mapped and then analyzed and revised through SIPOC Analysis by incorporating to PDCA Cycle and ISO 9001 QMS to identify problem areas, variations and unnecessary activities. Corrective actions were recommended to deal with problem areas and an improved and revised Supplier Performance Monitoring and Improvement (SPMI Process is suggested. Conclusions: Every organization needs to use a proper combination and selection of quality tools, methodologies and techniques for implementing continuous quality improvement process. This framework will provide a guidance for anyone who wants to develop supplier performance measurement system in sports goods manufacturing industry and other small - medium enterprises.

A fuzzy MICMAC analysis for improving supply chain performance of basic vaccines in developing countries.

Science.gov (United States)

Chandra, Dheeraj; Kumar, Dinesh

2018-03-01

In recent years, demand to improve child immunization coverage globally, and the development of the latest vaccines and technology has made the vaccine market very complex. The rise in such complexities often gives birth to numerous issues in the vaccine supply chain, which are the primary cause of its poor performance. Figuring out the cause of the performance problem can help you decide how to address it. The goal of the present study is to identify and analyze important issues in the supply chain of basic vaccines required for child immunization in the developing countries. Twenty-five key issues as various factors of the vaccine supply chain have been presented in this paper. Fuzzy MICMAC analysis has been carried out to classify the factors based on their driving and dependence power and to develop a hierarchy based model. Further, the findings have been discussed with the field experts to identify the critical factors. Three factors: better demand forecast, communication between the supply chain members, and proper planning and scheduling have been identified as the critical factors of vaccine supply chain. These factors should be given special care to improve vaccine supply chain performance.

Interventions to improve gross motor performance in children with neurodevelopmental disorders: a meta-analysis.

Science.gov (United States)

Lucas, Barbara R; Elliott, Elizabeth J; Coggan, Sarah; Pinto, Rafael Z; Jirikowic, Tracy; McCoy, Sarah Westcott; Latimer, Jane

2016-11-29

Gross motor skills are fundamental to childhood development. The effectiveness of current physical therapy options for children with mild to moderate gross motor disorders is unknown. The aim of this study was to systematically review the literature to investigate the effectiveness of conservative interventions to improve gross motor performance in children with a range of neurodevelopmental disorders. A systematic review with meta-analysis was conducted. MEDLINE, EMBASE, AMED, CINAHL, PsycINFO, PEDro, Cochrane Collaboration, Google Scholar databases and clinical trial registries were searched. Published randomised controlled trials including children 3 to ≤18 years with (i) Developmental Coordination Disorder (DCD) or Cerebral Palsy (CP) (Gross Motor Function Classification System Level 1) or Developmental Delay or Minimal Acquired Brain Injury or Prematurity (gross motor outcomes obtained using a standardised assessment tool. Meta-analysis was performed to determine the pooled effect of intervention on gross motor function. Methodological quality and strength of meta-analysis recommendations were evaluated using PEDro and the GRADE approach respectively. Of 2513 papers, 9 met inclusion criteria including children with CP (n = 2) or DCD (n = 7) receiving 11 different interventions. Only two of 9 trials showed an effect for treatment. Using the least conservative trial outcomes a large beneficial effect of intervention was shown (SMD:-0.8; 95% CI:-1.1 to -0.5) with "very low quality" GRADE ratings. Using the most conservative trial outcomes there is no treatment effect (SMD:-0.1; 95% CI:-0.3 to 0.2) with "low quality" GRADE ratings. Study limitations included the small number and poor quality of the available trials. Although we found that some interventions with a task-orientated framework can improve gross motor outcomes in children with DCD or CP, these findings are limited by the very low quality of the available evidence. High quality intervention

Improving engineers' performance with computers

International Nuclear Information System (INIS)

Purvis, E.E. III

1984-01-01

The problem addressed is how to improve the performance of engineers in the design, operation, and maintenance of nuclear power plants. The application of computer science to this problem offers a challenge in maximizing the use of developments outside the nuclear industry and setting priorities to address the most fruitful areas first. Areas of potential benefits include data base management through design, analysis, procurement, construction, operation maintenance, cost, schedule and interface control and planning, and quality engineering on specifications, inspection, and training

Performance optimisations for distributed analysis in ALICE

CERN Document Server

Betev, L; Gheata, M; Grigoras, C; Hristov, P

2014-01-01

Performance is a critical issue in a production system accommodating hundreds of analysis users. Compared to a local session, distributed analysis is exposed to services and network latencies, remote data access and heterogeneous computing infrastructure, creating a more complex performance and efficiency optimization matrix. During the last 2 years, ALICE analysis shifted from a fast development phase to the more mature and stable code. At the same time, the framewo rks and tools for deployment, monitoring and management of large productions have evolved considerably too. The ALICE Grid production system is currently used by a fair share of organized and individual user analysis, consuming up to 30% or the available r esources and ranging from fully I/O - bound analysis code to CPU intensive correlations or resonances studies. While the intrinsic analysis performance is unlikely to improve by a large factor during the LHC long shutdown (LS1), the overall efficiency of the system has still to be improved by a...

New software for improving performance in wind farm operations

Energy Technology Data Exchange (ETDEWEB)

Collins, Mark [Ekho for Wind (Canada)

2011-07-01

The performance of wind farms depends on multiple field and business systems. This makes operational planning difficult because of so many data being in separate systems, duplication of data and the impossibility of gathering all relevant data together in one place. The aim of this paper is to present a new software, Ekho for Wind, which helps improve performance in wind farm operations by providing features such as high level views, performance analysis, downtime tracking, quality data management and forecast generation. This new software provides operational intelligence which offers incentives for continuous improvement. Ekho for Wind can bring such benefits as maximization of generation, increased lifetime of assets, minimization of costs and increased profitability. This presentation introduced a new software for improving the performance of wind farms and the lifetime of assets, resulting in significant payback.

A study on improving the performance of steam generator using thermal analysis

International Nuclear Information System (INIS)

Li, Zhen Zhe; Heo, Kwang Su; Choi, Jun Hoo; Seol, Seoung Yun

2008-01-01

Steam generation mechanism is the key technology of domestic steam cleaner. Not only weight and price of steam cleaner but also the performance of steam generation mechanism must be considered to improve the competitive power of the products. In order to find out the mechanism which can be used to improve the performance of steam generator, the process of steam generation was studied at first. In the following step, possibility of control, safety of mechanism and etc were compared about the two candidated steam generation mechanism. Finally, the merit and drawback of each mechanism were summarized

Benchmarking and performance improvement at Rocky Flats Technology Site

International Nuclear Information System (INIS)

Elliott, C.; Doyle, G.; Featherman, W.L.

1997-03-01

The Rocky Flats Environmental Technology Site has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes

Educational Technology Research Journals: Performance Improvement Quarterly, 2001-2010

Science.gov (United States)

Mayer, Alisha Rasmussen; Francis, Jenifer; Harrison, J. Buckley; McPhillen, Ammon S.; West, Richard E.

2012-01-01

This article is an analysis of "Performance Improvement Quarterly" (PIQ) for the years 2001-2010. The intent was to examine the article types used, the authors who contributed the most to the journal, the topics the journal most commonly focused on, and the citation frequency of the journal's articles. The analysis revealed that…

Simulation analysis of capacity and performance improvement in wastewater treatment plants: Case study of Alexandria eastern plant

Science.gov (United States)

Moursy, Aly; Sorour, Mohamed T.; Moustafa, Medhat; Elbarqi, Walid; Fayd, Mai; Elreedy, Ahmed

2018-05-01

This study concerns the upgrading of a real domestic wastewater treatment plant (WWTP) supported by simulation. The main aims of this work are to: (1) decide between two technologies to improve WWTP capacity and its nitrogen removal efficiency; membrane bioreactor (MBR) and integrated fixed film activated sludge (IFAS), and (2) perform a cost estimation analysis for the two proposed solutions. The model used was calibrated based on data from the existing WWTP, namely, Eastern plant and located in Alexandria, Egypt. The activated sludge model No. 1 (ASM1) was considered in the model analysis by GPS-X 7 software. Steady-state analysis revealed that high performances corresponded to high compliance with Egyptian standards were achieved by the two techniques; however, MBR was better. Nonetheless, the two systems showed poor nitrogen removal efficiency according to the current situation, which reveals that the plant needs a modification to add an anaerobic treatment unit before the aerobic zone.

Can training improve human performance

International Nuclear Information System (INIS)

Waylett, W.J. Jr.

1986-01-01

The nuclear industry has made a significant commitment to improve training through the implementation of performance-based training programs. Senior management expects that human performance improvement will result from this significant resource allocation. The author examines this hypothesis and discusses other issues that may interfere with enhancing human performance through training. The integration of quality improvement concepts to support training is also discussed by the author, who was a pioneer facilitator during the development of Florida Power and Light Company's Quality Improvement Program. Critical success factors are proposed based on the author's experience as a plant manager, training manager and quality facilitator

Maintenance performance improvement with System Dynamics : A Corrective Maintenance showcase

NARCIS (Netherlands)

Deenen, R.E.M.; Van Daalen, C.E.; Koene, E.G.C.

2008-01-01

This paper presents a case study of an analysis of a Corrective Maintenance process to realize performance improvement. The Corrective Maintenance process is supported by SAP, which has indicated the performance realisation problem. System Dynamics is used in a Group Model Building process to

Nitrate supplementation improves physical performance specifically in non-athletes during prolonged open-ended tests: a systematic review and meta-analysis.

Science.gov (United States)

Campos, Helton O; Drummond, Lucas R; Rodrigues, Quezia T; Machado, Frederico S M; Pires, Washington; Wanner, Samuel P; Coimbra, Cândido C

2018-03-01

Nitrate (NO3 -) is an ergogenic nutritional supplement that is widely used to improve physical performance. However, the effectiveness of NO3 - supplementation has not been systematically investigated in individuals with different physical fitness levels. The present study analysed whether different fitness levels (non-athletes v. athletes or classification of performance levels), duration of the test used to measure performance (short v. long duration) and the test protocol (time trials v. open-ended tests v. graded-exercise tests) influence the effects of NO3 - supplementation on performance. This systematic review and meta-analysis was conducted and reported according to the guidelines outlined in the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA) statement. A systematic search of electronic databases, including PubMed, Web of Science, SPORTDiscus and ProQuest, was performed in August 2017. On the basis of the search and inclusion criteria, fifty-four and fifty-three placebo-controlled studies evaluating the effects of NO3 - supplementation on performance in humans were included in the systematic review and meta-analysis, respectively. NO3 - supplementation was ergogenic in non-athletes (mean effect size (ES) 0·25; 95 % CI 0·11, 0·38), particularly in evaluations of performance using long-duration open-ended tests (ES 0·47; 95 % CI 0·23, 0·71). In contrast, NO3 - supplementation did not enhance the performance of athletes (ES 0·04; 95 % CI -0·05, 0·15). After objectively classifying the participants into different performance levels, the frequency of trials showing ergogenic effects in individuals classified at lower levels was higher than that in individuals classified at higher levels. Thus, the present study indicates that dietary NO3 - supplementation improves physical performance in non-athletes, particularly during long-duration open-ended tests.

Improving the performance of a filling line based on simulation

Science.gov (United States)

Jasiulewicz-Kaczmarek, M.; Bartkowiak, T.

2016-08-01

The paper describes the method of improving performance of a filling line based on simulation. This study concerns a production line that is located in a manufacturing centre of a FMCG company. A discrete event simulation model was built using data provided by maintenance data acquisition system. Two types of failures were identified in the system and were approximated using continuous statistical distributions. The model was validated taking into consideration line performance measures. A brief Pareto analysis of line failures was conducted to identify potential areas of improvement. Two improvements scenarios were proposed and tested via simulation. The outcome of the simulations were the bases of financial analysis. NPV and ROI values were calculated taking into account depreciation, profits, losses, current CIT rate and inflation. A validated simulation model can be a useful tool in maintenance decision-making process.

Factors for analysing and improving performance of R&D in Malaysian universities

NARCIS (Netherlands)

Ramli, Mohammad Shakir; de Boer, S.J.; de Bruijn, E.J.

2004-01-01

This paper presents a model for analysing and improving performance of R&D in Malaysian universities. There are various general models for R&D analysis, but none is specific for improving the performance of R&D in Malaysian universities. This research attempts to fill a gap in the body of knowledge

Performance and economic analysis of a plug and play regenerative brake for improving energy efficiency for traction elevators

Science.gov (United States)

Jeraputra, Chuttchaval; Tiptipakorn, Supun

2017-05-01

This paper presents performance and economic analysis of a plug and play regenerative brake for improving energy efficiency for traction elevators. The proposed regenerative brake recycles the energy loss of a dynamic brake and feeds into the grid while an elevator inverter is operating in the braking mode. According to field measurement of energy consumption, it reveals that the efficiency can be improved as much as 18%. The prototype of a regenerative brake 12 kW, 400V, 3ϕ is developed and tested on an elevator simulator. It is shown that it can transfer energy out of a DC capacitor before the dynamic brake kicks in. Further, an economic analysis is provided to carry out the payback period and the present worth equivalent to confirm economic feasibility.

Performance improvement: the organization's quest.

Science.gov (United States)

McKinley, C O; Parmer, D E; Saint-Amand, R A; Harbin, C B; Roulston, J C; Ellis, R A; Buchanan, J R; Leonard, R B

1999-01-01

In today's health care marketplace, quality has become an expectation. Stakeholders are demanding quality clinical outcomes, and accrediting bodies are requiring clinical performance data. The Roosevelt Institute's quest was to define and quantify quality outcomes, develop an organizational culture of performance improvement, and ensure customer satisfaction. Several of the organization's leaders volunteered to work as a team to develop a specific performance improvement approach tailored to the organization. To date, over 200 employees have received an orientation to the model and its philosophy and nine problem action and process improvement teams have been formed.

Improving student satisfaction of Andalas University Dormitory through Service Quality and Importance Performance Analysis

Science.gov (United States)

Putri, Nilda Tri; Anggraini, Larisa

2018-03-01

Residential satisfaction of university dormitories serve as one of the significant aspects in the framework of sustainability in higher education. This research investigated the quality of dormitory services in Andalas University Dormitory based on student’s satisfaction. According to management residential, the enrollment of residential student has increased gradually in Andalas University. In 2016, capacity of residential student is 1686, but only 1081 students can stay at dormitory because some rooms in bad condition. There are a lot of problems and complaints regarding dormitory’s service quality i.e water problems, leaky rooms and bathrooms, cleanliness and inadequate facilities in residential college. In addition, there are 20% of last year student’s residential check out before the time of contract runs out. The aim of this research are understanding the level of GAP exists between expectation and perception students’ residential in the content of service quality and evaluating the improvement priority services using Importance Performance Analysis. This study is measuring service quality by using Responsiveness, Assurance, Empathy, Reliability and Tangible dimension. A negative GAP indicates that the actual services are than what was expected and the GAP is highlighted area for improvement. Based on IPA, management should improve this following dimension services : responsiveness, tangible and assurance dimension.

Improvement programme of safety performance indicators (SPIs) in Korea

International Nuclear Information System (INIS)

Lee, S.Y.

2001-01-01

KINS has developed and used Safety Performance Indicators (SPIs), which are count based and composed of 10 indicators in 8 areas, to monitor the trend of performance of NPPs in Korea since 1997. However, the limited usage of SPIs and the increasing worldwide interest on SPIs became the motivation of the SPI improvement programme in Korea. Korea is planning to establish plant performance evaluation programme through analysis of SPI and result of inspection. The SPI improvement programme is a part of the plant performance evaluation programme and includes study on performance evaluation areas, indicator categories, selection and development of indicators, redefinition of indicators and introduction of graphical display system. The selected performance evaluation areas are general performance, reactor safety and radiation safety. Each area will have categories as sub-areas and a total of six categories are selected. One or two indicators for each category are determined or will be developed to make a set of Safety Performance Indicators. Also, a graphic display system will be introduced to extend the usage of SPIs. (author)

Improved performance of the industry

International Nuclear Information System (INIS)

Jeffrey, R.

1994-01-01

The remarkable improvements in the performance of AGR stations is illustrated. The underlying reasons for this improvement are discussed, emphasizing both the operational performance factors which have led to higher sustained output and the managerial and cultural changes which have focused attention at all levels on the need to be competitive. It is concluded that the UK nuclear industry has become world class with more improvements to come, an asset to the UK. (Author)

Machine learning-based analysis of MR radiomics can help to improve the diagnostic performance of PI-RADS v2 in clinically relevant prostate cancer

Energy Technology Data Exchange (ETDEWEB)

Wang, Jing [CFDA, Center for Medical Device Evaluation, Beijing (China); Wu, Chen-Jiang; Zhang, Jing; Wang, Xiao-Ning; Zhang, Yu-Dong [First Affiliated Hospital with Nanjing Medical University, Department of Radiology, Nanjing, Jiangsu Province (China); Bao, Mei-Ling [First Affiliated Hospital with Nanjing Medical University, Department of Pathology, Nanjing (China)

2017-10-15

To investigate whether machine learning-based analysis of MR radiomics can help improve the performance PI-RADS v2 in clinically relevant prostate cancer (PCa). This IRB-approved study included 54 patients with PCa undergoing multi-parametric (mp) MRI before prostatectomy. Imaging analysis was performed on 54 tumours, 47 normal peripheral (PZ) and 48 normal transitional (TZ) zone based on histological-radiological correlation. Mp-MRI was scored via PI-RADS, and quantified by measuring radiomic features. Predictive model was developed using a novel support vector machine trained with: (i) radiomics, (ii) PI-RADS scores, (iii) radiomics and PI-RADS scores. Paired comparison was made via ROC analysis. For PCa versus normal TZ, the model trained with radiomics had a significantly higher area under the ROC curve (Az) (0.955 [95% CI 0.923-0.976]) than PI-RADS (Az: 0.878 [0.834-0.914], p < 0.001). The Az between them was insignificant for PCa versus PZ (0.972 [0.945-0.988] vs. 0.940 [0.905-0.965], p = 0.097). When radiomics was added, performance of PI-RADS was significantly improved for PCa versus PZ (Az: 0.983 [0.960-0.995]) and PCa versus TZ (Az: 0.968 [0.940-0.985]). Machine learning analysis of MR radiomics can help improve the performance of PI-RADS in clinically relevant PCa. (orig.)

Machine learning-based analysis of MR radiomics can help to improve the diagnostic performance of PI-RADS v2 in clinically relevant prostate cancer

International Nuclear Information System (INIS)

Wang, Jing; Wu, Chen-Jiang; Zhang, Jing; Wang, Xiao-Ning; Zhang, Yu-Dong; Bao, Mei-Ling

2017-01-01

To investigate whether machine learning-based analysis of MR radiomics can help improve the performance PI-RADS v2 in clinically relevant prostate cancer (PCa). This IRB-approved study included 54 patients with PCa undergoing multi-parametric (mp) MRI before prostatectomy. Imaging analysis was performed on 54 tumours, 47 normal peripheral (PZ) and 48 normal transitional (TZ) zone based on histological-radiological correlation. Mp-MRI was scored via PI-RADS, and quantified by measuring radiomic features. Predictive model was developed using a novel support vector machine trained with: (i) radiomics, (ii) PI-RADS scores, (iii) radiomics and PI-RADS scores. Paired comparison was made via ROC analysis. For PCa versus normal TZ, the model trained with radiomics had a significantly higher area under the ROC curve (Az) (0.955 [95% CI 0.923-0.976]) than PI-RADS (Az: 0.878 [0.834-0.914], p < 0.001). The Az between them was insignificant for PCa versus PZ (0.972 [0.945-0.988] vs. 0.940 [0.905-0.965], p = 0.097). When radiomics was added, performance of PI-RADS was significantly improved for PCa versus PZ (Az: 0.983 [0.960-0.995]) and PCa versus TZ (Az: 0.968 [0.940-0.985]). Machine learning analysis of MR radiomics can help improve the performance of PI-RADS in clinically relevant PCa. (orig.)

Performance improvement - business excellence processes

International Nuclear Information System (INIS)

Doucett, J.

2010-01-01

This presentation discusses Performance Improvement which is defined as 'the process of identifying and analyzing important organizational and individual performance gaps, planning for future performance improvement, designing and developing cost-effective and ethically justifiable intervention to close performance gaps, implementing the interventions and evaluating the financial and non-financial results', i.e. making things better. Specifically, it discusses the refurbishment outage at the Point Lepreau Power Plant that began at the end of March 2008. The business risks identified in 2008 were leadership, demographics and management system.

Improve data integration performance by employing metadata management utility

Energy Technology Data Exchange (ETDEWEB)

Wei, M.; Sung, A.H. [New Mexico Petroleum Recovery Research Center, Socorro, NM (United States)

2005-07-01

This conference paper explored ways of integrating petroleum and exploration data obtained from different sources in order to provide more comprehensive data for various analysis purposes and to improve the integrity and consistency of integrated data. This paper proposes a methodology to enhance oil and gas industry data integration performance by cooperating data management utilities in Microsoft SQL Server database management system (DBMS) for small scale data integration without support of commercial software. By semi-automatically capturing metadata, data sources are investigated in detail, data quality problems are partially cleansed, and the performance of data integration is improved. 20 refs., 7 tabs., 1 fig.

Design aspects of PHWR for improved performance

International Nuclear Information System (INIS)

Das, M.

1989-01-01

The PHWR fuel bundle is elegantly simple in design consisting of only six components. The unique features of the design include high density natural UO 2 pellets, collapsible zircaloy cladding, no gas plenums and short (50 cm), simple bundle configuration. Over the last 20 years, considerable efforts have been expended and still being continued on development of analytical tools and computer codes generation of technical specifications tests and experimental studies type tests on prototype bundles irradiation of special documented fuel bundles in power reactors and monitoring and analysis of fuel performance. The knowledge thus gained has helped us to modify design requirements, relax technical specifications and to evolve new, improved designs. The PHWR fuel technology in India can now be considered as well proven but there is considerable scope for further improvements both in design and manufacturing. For example, in design, use of thinner wall cladding (to improve burn up) bundle design with graded elements, double dished pellet, improved coatings, use of MOX fuel etc. are being explored. On the manufacturing side emphasis need to be given on maintaining the quality, improvement on production and process control. The use of automation and advances in machine control techniques, for example, using micro processors can effectively contribute to improvements in quality, productivity and lowering of fuel fabrication costs. In this paper, the PHWR fuel design features, different fuel designs evolved, fuel specifications, influence of fabrication variables and future direction in improved fuel performance are discussed. (author) 9 refs., 7 figs

Performance improvement - business excellence processes

Energy Technology Data Exchange (ETDEWEB)

Doucett, J. [NB Nuclear Power, Point Lepreau, New Brunswick (Canada)

2010-07-01

This presentation discusses Performance Improvement which is defined as 'the process of identifying and analyzing important organizational and individual performance gaps, planning for future performance improvement, designing and developing cost-effective and ethically justifiable intervention to close performance gaps, implementing the interventions and evaluating the financial and non-financial results', i.e. making things better. Specifically, it discusses the refurbishment outage at the Point Lepreau Power Plant that began at the end of March 2008. The business risks identified in 2008 were leadership, demographics and management system.

Benchmarking and Performance Improvement at Rocky Flats Environmental Technology Site

Energy Technology Data Exchange (ETDEWEB)

Elliott, C. [Kaiser-Hill Co., LLC, Golden, CO (United States)], Doyle, D. [USDOE Rocky Flats Office, Golden, CO (United States)], Featherman, W.D. [Project Performance Corp., Sterline, VA (United States)

1997-12-31

The Rocky Flats Environmental Technology Site (RFETS) has initiated a major work process improvement campaign using the tools of formalized benchmarking and streamlining. This paper provides insights into some of the process improvement activities performed at Rocky Flats from November 1995 through December 1996. It reviews the background, motivation, methodology, results, and lessons learned from this ongoing effort. The paper also presents important gains realized through process analysis and improvement including significant cost savings, productivity improvements, and an enhanced understanding of site work processes.

Performance analysis

International Nuclear Information System (INIS)

2008-05-01

This book introduces energy and resource technology development business with performance analysis, which has business division and definition, analysis of current situation of support, substance of basic plan of national energy, resource technique development, selection of analysis index, result of performance analysis by index, performance result of investigation, analysis and appraisal of energy and resource technology development business in 2007.

Effectively managing nuclear risk through human performance improvement

International Nuclear Information System (INIS)

Coe, R.P.

2004-01-01

is to apply the principles of Human Performance Technology, or HPT, to the nuclear workplace. HPT is a relatively new field that has been emerging over the several decades. Its principles are derived from the research and practice of behavioral and cognitive psychologist, instructional technologists training designers, organizational developers and various human resource specialists. Relying heavily on general systems theory as applied to organizations, HPT takes a systemic approach to risk assessment and performance analysis/ change as opposed to making piecemeal interventions which often happens in designing training programs intended to be the only fix specific organizational behavior problems in the short term. Specifically, HPT methodology emphasizes examining any given problem in relation to the more global aims of the setting or environment within which the problem is identified. Its consistent driver is measurable performance and the structuring of elements within the system to improve and reward desirable performance and effective risk management. In general, HPT is more than another way to look at training, HPT is a systemized process that combines selection, analysis, design, development, implementation, and evaluation of programs to most cost effectively influence human behavior and accomplishment. By taking a systems view of organizations rather than discreetly focusing on pockets of concern within an organization, it seeks to link the actions and interventions of all the organizational elements that affect overall performance. It does this through identifying, among other things, current performance levels, required performance levels for effective risk management, exemplary performance, and developing measurements for each step in the process. It examines such things as the external and organizational environments as well as the influences that directly impact individual performance. Direct application to the nuclear industry is evident when

Energy and Exergy Analysis for Improving the Energy Performance of Air-Cooled Liquid Chillers by Different Condensing-Coil Configurations

Directory of Open Access Journals (Sweden)

Tzong-Shing Lee

2012-03-01

Full Text Available This study constructed a parameter analysis for improving the energy performance of air-cooled water chillers by altering the angle configuration of the condenser coils. The mathematical models for energy and exergy analyses of the individual components and overall system of air-cooled water chillers are presented. This study investigated the potential enhancement of performance efficiency in air-cooled chillers and the energy conversion efficiency of each component, in order to determine how the angle configuration of condenser coils influences chiller performance. This study found that the overall performance of an air-cooled chiller could be improved by approximately 3.4%, and the total irreversibility could be reduced by approximately 2.7%. With each 1% increase in average wind speed over the condenser coils, the overall performance of an air‑cooled chiller was found to be enhanced by approximately 0.43%, and its total irreversibility was reduced by approximately 0.35%. The results of this study can be effectively applied to air-cooled condenser units, and can provide an important basis of reference for developing and enhancing the energy efficiency of air-cooled chillers.

Performance Analysis using Coloured Petri Nets

DEFF Research Database (Denmark)

Wells, Lisa Marie

Performance is often a central issue in the design, development, and configuration of systems. It is not always enough to know that systems work properly, they must also work effectively. There are numerous studies, e.g. in the areas of computer and telecommunication systems, manufacturing......, military, health care, and transportation, that have shown that time, money, and even lives can be saved if the performance of a system is improved. Performance analysis studies are conducted to evaluate existing or planned systems, to compare alternative configurations, or to find an optimal configuration...... of a system. There are three alternative techniques for analysing the performance of a system: measurement, analytical models, and simulation models. This dissertation focuses on the the use of coloured Petri nets for simulationbased performance analysis of industrial-sized systems. Coloured Petri nets...

Improved Helicopter Rotor Performance Prediction through Loose and Tight CFD/CSD Coupling

Science.gov (United States)

Ickes, Jacob C.

Helicopters and other Vertical Take-Off or Landing (VTOL) vehicles exhibit an interesting combination of structural dynamic and aerodynamic phenomena which together drive the rotor performance. The combination of factors involved make simulating the rotor a challenging and multidisciplinary effort, and one which is still an active area of interest in the industry because of the money and time it could save during design. Modern tools allow the prediction of rotorcraft physics from first principles. Analysis of the rotor system with this level of accuracy provides the understanding necessary to improve its performance. There has historically been a divide between the comprehensive codes which perform aeroelastic rotor simulations using simplified aerodynamic models, and the very computationally intensive Navier-Stokes Computational Fluid Dynamics (CFD) solvers. As computer resources become more available, efforts have been made to replace the simplified aerodynamics of the comprehensive codes with the more accurate results from a CFD code. The objective of this work is to perform aeroelastic rotorcraft analysis using first-principles simulations for both fluids and structural predictions using tools available at the University of Toledo. Two separate codes are coupled together in both loose coupling (data exchange on a periodic interval) and tight coupling (data exchange each time step) schemes. To allow the coupling to be carried out in a reliable and efficient way, a Fluid-Structure Interaction code was developed which automatically performs primary functions of loose and tight coupling procedures. Flow phenomena such as transonics, dynamic stall, locally reversed flow on a blade, and Blade-Vortex Interaction (BVI) were simulated in this work. Results of the analysis show aerodynamic load improvement due to the inclusion of the CFD-based airloads in the structural dynamics analysis of the Computational Structural Dynamics (CSD) code. Improvements came in the form

ACHIEVING MATURITY (AND MEASURING PERFORMANCE THROUGH MODEL-BASED PROCESS IMPROVEMENT

Directory of Open Access Journals (Sweden)

Jose Marcelo Almeida Prado Cestari

2013-08-01

Full Text Available This paper presents the approach adopted by a software development unit in order to achieve the maturity level 3 of CMMI-DEV and therefore obtaining better performance. Through historical research and secondary data analysis of the organization, the paper intends to answer the following research question: "Could the adoption of maturity/best practices models bring better performance results to small and medium organizations?" Data and analysis conducted show that, besides the creation of indicator’s based management, there are some quantitative performance improvements in indicators such as: Schedule Deviation Rate, Effort Deviation Rate, Percent Late Delivery, Productivity Deviation and Internal Rework Rate

Performance indicators: A tool for continuous quality improvement

Directory of Open Access Journals (Sweden)

Nidhi M Bhatnagar

2016-01-01

Full Text Available Background: Performance monitoring is an important tool which can be used for setting priorities for process improvement. At our centre, we have been monitoring every step in the processes, right from inventory of consumables (both critical and routine to number of donors reactive for TTI. We conducted a study to measure the impact of monitoring Performance Indicators and how it could be used as a tool for Continuous Quality Improvement (CQI. Materials and Methods: The present study was a retrospective study where the performance indicator (PI data of blood bank was analyzed for over four years. For certain parameters, benchmarks or thresholds were set that represented warning limits or action limits. The yearly data were collated from monthly data. "Shifts" or "Trends", if any, were identified and Corrective and Preventive Action (CAPA taken accordingly. At the end, outcomes of the analysis were charted. Results: After the yearly data evaluation, outcomes obtained were used to plan, correct and amend processes and systems in the blood center. It was observed that the workload of the center showed an upward trend. This helped us to plan for the purchase of consumables and management of manpower. The monitoring of usage and discard of blood helped in the efficient management of blood stocks. The need for any new equipment could also be judged by the trends in workload. Conclusion: Performance indicators are indispensible tools which various stakeholders in the Blood Transfusion centres should implement to improve on quality performance.

Performance indicators: A tool for continuous quality improvement.

Science.gov (United States)

Bhatnagar, Nidhi M; Soni, Shital; Gajjar, Maitrey; Shah, Mamta; Shah, Sangita; Patel, Vaidehi

2016-01-01

Performance monitoring is an important tool which can be used for setting priorities for process improvement. At our centre, we have been monitoring every step in the processes, right from inventory of consumables (both critical and routine) to number of donors reactive for TTI. We conducted a study to measure the impact of monitoring Performance Indicators and how it could be used as a tool for Continuous Quality Improvement (CQI). The present study was a retrospective study where the performance indicator (PI) data of blood bank was analyzed for over four years. For certain parameters, benchmarks or thresholds were set that represented warning limits or action limits. The yearly data were collated from monthly data. Shifts or Trends, if any, were identified and Corrective and Preventive Action (CAPA) taken accordingly. At the end, outcomes of the analysis were charted. After the yearly data evaluation, outcomes obtained were used to plan, correct and amend processes and systems in the blood center. It was observed that the workload of the center showed an upward trend. This helped us to plan for the purchase of consumables and management of manpower. The monitoring of usage and discard of blood helped in the efficient management of blood stocks. The need for any new equipment could also be judged by the trends in workload. Performance indicators are indispensible tools which various stakeholders in the Blood Transfusion centres should implement to improve on quality performance.

The impact of relational governance on performance improvement in export manufacturing firms

Directory of Open Access Journals (Sweden)

Usama Awan

2018-05-01

Full Text Available Purpose: This paper seeks to identify the factors affecting social performance improvemens in the Pakistan export manufacturing firms and investigae inter-relationships existing among them. Design/methodology/approach: This study used a cross-sectional survey; data were collected using self-administered survey questionnaire. Using data collected from 239 small- and medium-sized direct exporters manufacturing firms in Pakistan. We used structural equation modelling (SEM approach to test structural model, and mediation analysis was conducted with regression analysis. Findings: The results support that meta-cognitive dimensions of cultural intelligence effect on social performance improvements, while the social performance improvement significant associated with innovation performance improvements. We suggest that cultural intelligence is a key to maintaining a relationship through development better cultural understanding and creating harmony among suppliers and buyers through minimizing the differences and disputes, requires developing social cohesion. Our results reveal that exporting firms need to adapt, reconfigure cultural knowledge and integrate resources into the operations to build learning capability, in turn, they can improve social performance and achieve superior innovation performance. Practical implications: Through the application of cultural intelligence capabilty, a firm could increase its ability to sense cultural differences, seize and adapt globally scattered cultural practices on social issues and allows for the development of unique knowledge resources and capabilities, impact on firm social performance and innovation performance improvements. Originality/value: The study conducted in Pakistan cultural context, which can be extended to other Asian countries. We argue that in a globalising world it is pertinent for exporting firms to have a better understanding of the various facets of cultural when dealing with inter

Improving Site-Specific Radiological Performance Assessments - 13431

Energy Technology Data Exchange (ETDEWEB)

Tauxe, John; Black, Paul; Catlett, Kate; Lee, Robert; Perona, Ralph; Stockton, Tom; Sully, Mike [Neptune and Company, Inc., Los Alamos, New Mexico 87544 (United States)

2013-07-01

An improved approach is presented for conducting complete and defensible radiological site-specific performance assessments (PAs) to support radioactive waste disposal decisions. The basic tenets of PA were initiated some thirty years ago, focusing on geologic disposals and evaluating compliance with regulations. Some of these regulations were inherently probabilistic (i.e., addressing uncertainty in a quantitative fashion), such as the containment requirements of the U.S. Environmental Protection Agency's (EPA's) 40 CFR 191, Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, Chap. 191.13 [1]. Methods of analysis were developed to meet those requirements, but at their core early PAs used 'conservative' parameter values and modeling approaches. This limited the utility of such PAs to compliance evaluation, and did little to inform decisions about optimizing disposal, closure and long-term monitoring and maintenance, or, in general, maintaining doses 'as low as reasonably achievable' (ALARA). This basic approach to PA development in the United States was employed essentially unchanged through the end of the 20. century, principally by the U.S. Department of Energy (DOE). Performance assessments developed in support of private radioactive waste disposal operations, regulated by the U.S. Nuclear Regulatory Commission (NRC) and its agreement states, were typically not as sophisticated. Discussion of new approaches to PA is timely, since at the time of this writing, the DOE is in the midst of revising its Order 435.1, Radioactive Waste Management [2], and the NRC is revising 10 CFR 61, Licensing Requirements for Land Disposal of Radioactive Waste [3]. Over the previous decade, theoretical developments and improved computational technology have provided the foundation for integrating decision analysis (DA) concepts and objective-focused thinking, plus

Improving Site-Specific Radiological Performance Assessments - 13431

International Nuclear Information System (INIS)

Tauxe, John; Black, Paul; Catlett, Kate; Lee, Robert; Perona, Ralph; Stockton, Tom; Sully, Mike

2013-01-01

An improved approach is presented for conducting complete and defensible radiological site-specific performance assessments (PAs) to support radioactive waste disposal decisions. The basic tenets of PA were initiated some thirty years ago, focusing on geologic disposals and evaluating compliance with regulations. Some of these regulations were inherently probabilistic (i.e., addressing uncertainty in a quantitative fashion), such as the containment requirements of the U.S. Environmental Protection Agency's (EPA's) 40 CFR 191, Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes, Chap. 191.13 [1]. Methods of analysis were developed to meet those requirements, but at their core early PAs used 'conservative' parameter values and modeling approaches. This limited the utility of such PAs to compliance evaluation, and did little to inform decisions about optimizing disposal, closure and long-term monitoring and maintenance, or, in general, maintaining doses 'as low as reasonably achievable' (ALARA). This basic approach to PA development in the United States was employed essentially unchanged through the end of the 20. century, principally by the U.S. Department of Energy (DOE). Performance assessments developed in support of private radioactive waste disposal operations, regulated by the U.S. Nuclear Regulatory Commission (NRC) and its agreement states, were typically not as sophisticated. Discussion of new approaches to PA is timely, since at the time of this writing, the DOE is in the midst of revising its Order 435.1, Radioactive Waste Management [2], and the NRC is revising 10 CFR 61, Licensing Requirements for Land Disposal of Radioactive Waste [3]. Over the previous decade, theoretical developments and improved computational technology have provided the foundation for integrating decision analysis (DA) concepts and objective-focused thinking, plus a Bayesian approach to

Analysis of the influence of plyometric training in improving the performance of athletes in rhythmic gymnastics

Directory of Open Access Journals (Sweden)

Barbara Raquel Agostini

2017-11-01

Full Text Available Rhythmic gymnastics (RG athletes need high-performance training since a high degree of precision is required in their exercises. Plyometric training (PT has been used to improve athletes' neuromuscular function, explosive performance and strength in competition. The object of this study was to assess the efficiency of PT in improving the performance of RG athletes in the juvenile and adult categories over 12 months, by incorporating PT into two training macrocycles. Thirty athletes were selected; they were divided randomly into a control group (CG and an experimental group (EG of 15 athletes each. Two 6-month training macrocycles were drawn up for the EG in which they maintained normal training with the addition of PT. The CG maintained its normal training. Three tests were used for the assessment: vertical jump, horizontal jump and agility, assessed at 5 different moments. After 12 months it was observed an improvement in test performance in both groups, with a more significant improvement in the EG when compared to the CG. The addition of PT to normal training improved the performance of athletes by developing greater power in the lower limbs, increasing their capacity in vertical jump, horizontal jump and agility.

Control and communication co-design: analysis and practice on performance improvement in distributed measurement and control system based on fieldbus and Ethernet.

Science.gov (United States)

Liang, Geng

2015-01-01

In this paper, improving control performance of a networked control system by reducing DTD in a different perspective was investigated. Two different network architectures for system implementation were presented. Analysis and improvement dealing with DTD for the experimental control system were expounded. Effects of control scheme configuration on DTD in the form of FB were investigated and corresponding improvements by reallocation of FB and re-arrangement of schedule table are proposed. Issues of DTD in hybrid network were investigated and corresponding approaches to improve performance including (1) reducing DTD in PLC or PAC by way of IEC61499 and (2) cascade Smith predictive control with BPNN-based identification were proposed and investigated. Control effects under the proposed methodologies were also given. Experimental and field practices validated these methodologies. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Improvements in training effectiveness and job performance: getting to what's necessary and sufficient

International Nuclear Information System (INIS)

McAllister, J.E.; Foulke, L.R.

1984-01-01

This paper describes a Competency Analysis Process for the development of training programs. This process is compared and contrasted with the Job/Task Analysis (J/TA) process being completed by the Institute of Nuclear Power Operations (INPO). Such competency/job analysis processes provide a training and performance base which contributes to improvements in human performance. Data presented in this paper reinforces the authors' belief in the value of competency analysis and the development of training programs based on competency analysis

Storage element performance optimization for CMS analysis jobs

International Nuclear Information System (INIS)

Behrmann, G; Dahlblom, J; Guldmyr, J; Happonen, K; Lindén, T

2012-01-01

Tier-2 computing sites in the Worldwide Large Hadron Collider Computing Grid (WLCG) host CPU-resources (Compute Element, CE) and storage resources (Storage Element, SE). The vast amount of data that needs to processed from the Large Hadron Collider (LHC) experiments requires good and efficient use of the available resources. Having a good CPU efficiency for the end users analysis jobs requires that the performance of the storage system is able to scale with I/O requests from hundreds or even thousands of simultaneous jobs. In this presentation we report on the work on improving the SE performance at the Helsinki Institute of Physics (HIP) Tier-2 used for the Compact Muon Experiment (CMS) at the LHC. Statistics from CMS grid jobs are collected and stored in the CMS Dashboard for further analysis, which allows for easy performance monitoring by the sites and by the CMS collaboration. As part of the monitoring framework CMS uses the JobRobot which sends every four hours 100 analysis jobs to each site. CMS also uses the HammerCloud tool for site monitoring and stress testing and it has replaced the JobRobot. The performance of the analysis workflow submitted with JobRobot or HammerCloud can be used to track the performance due to site configuration changes, since the analysis workflow is kept the same for all sites and for months in time. The CPU efficiency of the JobRobot jobs at HIP was increased approximately by 50 % to more than 90 %, by tuning the SE and by improvements in the CMSSW and dCache software. The performance of the CMS analysis jobs improved significantly too. Similar work has been done on other CMS Tier-sites, since on average the CPU efficiency for CMSSW jobs has increased during 2011. Better monitoring of the SE allows faster detection of problems, so that the performance level can be kept high. The next storage upgrade at HIP consists of SAS disk enclosures which can be stress tested on demand with HammerCloud workflows, to make sure that the I/O-performance

Improving performance on core processes of care.

Science.gov (United States)

Austin, John Matthew; Pronovost, Peter J

2016-06-01

This article describes the recent literature on using extrinsic and intrinsic motivators to improve performance on core processes of care, highlighting literature that describes general frameworks for quality improvement work. The literature supporting the effectiveness of extrinsic motivators to improve quality is generally positive for public reporting of performance, with mixed results for pay-for-performance. A four-element quality improvement framework developed by The Armstrong Institute at Johns Hopkins Medicine was developed with intrinsic motivation in mind. The clear definition and communication of goals are important for quality improvement work. Training clinicians in improvement science, such as lean sigma, teamwork, or culture change provides clinicians with the skills they need to drive the improvement work. Peer learning communities offer the opportunity for clinicians to engage with each other and offer support in their work. The transparent reporting of performance helps ensure accountability of performance ranging from individual clinicians to governance. Quality improvement work that is led by and engages clinicians offers the opportunity for the work to be both meaningful and sustainable. The literature supports approaching quality improvement work in a systematic way, including the key elements of communication, infrastructure building, training, transparency, and accountability.

Improved Dynamic Modeling of the Cascade Distillation Subsystem and Analysis of Factors Affecting Its Performance

Science.gov (United States)

Perry, Bruce A.; Anderson, Molly S.

2015-01-01

The Cascade Distillation Subsystem (CDS) is a rotary multistage distiller being developed to serve as the primary processor for wastewater recovery during long-duration space missions. The CDS could be integrated with a system similar to the International Space Station Water Processor Assembly to form a complete water recovery system for future missions. A preliminary chemical process simulation was previously developed using Aspen Custom Modeler® (ACM), but it could not simulate thermal startup and lacked detailed analysis of several key internal processes, including heat transfer between stages. This paper describes modifications to the ACM simulation of the CDS that improve its capabilities and the accuracy of its predictions. Notably, the modified version can be used to model thermal startup and predicts the total energy consumption of the CDS. The simulation has been validated for both NaC1 solution and pretreated urine feeds and no longer requires retuning when operating parameters change. The simulation was also used to predict how internal processes and operating conditions of the CDS affect its performance. In particular, it is shown that the coefficient of performance of the thermoelectric heat pump used to provide heating and cooling for the CDS is the largest factor in determining CDS efficiency. Intrastage heat transfer affects CDS performance indirectly through effects on the coefficient of performance.

Windows with improved energy performances

DEFF Research Database (Denmark)

Laustsen, Jacob Birck; Svendsen, Svend

2003-01-01

Heat loss through windows represents a considerable part of the total heat loss from houses. However, apart from providing daylight access and view, windows offer a unique potential for solar gain to be exploited during the heating season. Until now valuation of the energy performance of windows...... has primary focused on the heat loss coefficient, U-value. However, as the U-value, especially for the glazing part, has improved considerably during the last years, the total solar energy transmittance, g-value, has become equally important to the total energy performance of windows. Improved energy...... resulted in a window with a positive net energy gain (in short the Net Gain Window), which means that it contributes to the space heating of the building. All improvements are based on existing technology and manufacturing methods. The results from this work show that the energy performances of windows can...

Changes in cerebro-cerebellar interaction during response inhibition after performance improvement.

Science.gov (United States)

Hirose, Satoshi; Jimura, Koji; Kunimatsu, Akira; Abe, Osamu; Ohtomo, Kuni; Miyashita, Yasushi; Konishi, Seiki

2014-10-01

It has been demonstrated that motor learning is supported by the cerebellum and the cerebro-cerebellar interaction. Response inhibition involves motor responses and the higher-order inhibition that controls the motor responses. In this functional MRI study, we measured the cerebro-cerebellar interaction during response inhibition in two separate days of task performance, and detected the changes in the interaction following performance improvement. Behaviorally, performance improved in the second day, compared to the first day. The psycho-physiological interaction (PPI) analysis revealed the interaction decrease from the right inferior frontal cortex (rIFC) to the cerebellum (lobule VII or VI). It was also revealed that the interaction increased from the same cerebellar region to the primary motor area. These results suggest the involvement of the cerebellum in response inhibition, and raise the possibility that the performance improvement was supported by the changes in the cerebro-cerebellar interaction. Copyright © 2014 Elsevier Inc. All rights reserved.

Performance Improvement of Power Analysis Attacks on AES with Encryption-Related Signals

Science.gov (United States)

Lee, You-Seok; Lee, Young-Jun; Han, Dong-Guk; Kim, Ho-Won; Kim, Hyoung-Nam

A power analysis attack is a well-known side-channel attack but the efficiency of the attack is frequently degraded by the existence of power components, irrelative to the encryption included in signals used for the attack. To enhance the performance of the power analysis attack, we propose a preprocessing method based on extracting encryption-related parts from the measured power signals. Experimental results show that the attacks with the preprocessed signals detect correct keys with much fewer signals, compared to the conventional power analysis attacks.

Improvements in analysis techniques for segmented mirror arrays

Science.gov (United States)

Michels, Gregory J.; Genberg, Victor L.; Bisson, Gary R.

2016-08-01

The employment of actively controlled segmented mirror architectures has become increasingly common in the development of current astronomical telescopes. Optomechanical analysis of such hardware presents unique issues compared to that of monolithic mirror designs. The work presented here is a review of current capabilities and improvements in the methodology of the analysis of mechanically induced surface deformation of such systems. The recent improvements include capability to differentiate surface deformation at the array and segment level. This differentiation allowing surface deformation analysis at each individual segment level offers useful insight into the mechanical behavior of the segments that is unavailable by analysis solely at the parent array level. In addition, capability to characterize the full displacement vector deformation of collections of points allows analysis of mechanical disturbance predictions of assembly interfaces relative to other assembly interfaces. This capability, called racking analysis, allows engineers to develop designs for segment-to-segment phasing performance in assembly integration, 0g release, and thermal stability of operation. The performance predicted by racking has the advantage of being comparable to the measurements used in assembly of hardware. Approaches to all of the above issues are presented and demonstrated by example with SigFit, a commercially available tool integrating mechanical analysis with optical analysis.

Programs to improve plant performance

International Nuclear Information System (INIS)

Felmus, N.L.

1987-01-01

Looking toward the 1990's, we see a period in which our industry will face the challenge of improving the performance of the nuclear plants which are built and operating. The skills and technology are at hand to make good plant performance a reality and we believe the time has come to use them to achieve that end. As reserve margins decline, utilities and their regulators will increasingly seek to tap the unexploited capacity tied up in plants operating below their optimum availability. This paper describes a number of the programs, plant improvements and operations improvements which can yield a significant increase in nuclear plant availability and capacity factor now and into the 1990's. (author)

Methodological approach to organizational performance improvement process

OpenAIRE

Buble, Marin; Dulčić, Želimir; Pavić, Ivan

2017-01-01

Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

PERFORMANCE IMPROVEMENT STRATEGIES USED BY MANAGERS IN THE PRIVATE SECTOR

Directory of Open Access Journals (Sweden)

Raþiu Patricia

2013-07-01

Full Text Available Abstract: There are many situations in professional life when for various reasons we are employed in jobs that do not meet our emotional expectations our professional capabilities, our passions and therefore performance on that job will not be high. Analysis of the causes of under-utilization of human potential and adoption of appropriate strategies according to employee needs help reduce staff turnover costs. The main objective of the present paper consists in identifying managerial strategies which contribute to the improvement of the employees’ performances by stimulating their motivation, and the extent to which they are used in the managerial practice. Based on literature review we realized an integrated model and developed a classification, that present our own vision regarding performance improvement strategies. Our classification divides strategies for improving employees’ performances into four main groups: by employees’ development, by rewarding employees, by modifying the job description, by employee involvement in the organization. Starting from this model, through two types of questionnaires we have made an empirical research among managers as well as among office personnel, in order to capture both perspectives regarding the pursued objectives. For the present paper we will present only research results obtained for performance improvement strategies by employees’ development because support a higher degree of generality and do not depend on the organization characteristics. A quantitative data analize from the two samples show that there are differences between managers and employees perception when it comes to strategies used in their organizations and also manager did not know which determines employees to strive in order to improve their performance and obtain better results. The strategies to improve the employee’s performances, proposed within this article have the role to show the fact that managers cannot

Human performance improvement for nuclear power plants

International Nuclear Information System (INIS)

2005-01-01

The IAEA assists NPP operating organizations to improve plant performance through a focus on human performance improvement in areas like organizational and leadership development, senior management decision making, organization and management of HPI programmes including tools needed for effective HPI implementation, safety culture enhancement, knowledge management, personnel selection and staffing, career development, training and development, work design, scheduling and conditions, procedure and other job-aid development and use, effective communications, human performance monitoring, motivation. Many NPP operating organizations in Member States, are not yet achieving the full potential of their NPP technology/equipment regarding safety, operational or economic performance due to human performance weaknesses. The IAEA's HPI (Human Performance Improvement) services provide a means for these organizations to efficiently and effectively learn from international experts and the experiences of others in improving plant performance through human performance improvements. NPP operating organizations can benefit from these services in a number of ways, including requesting a national project, participating in a regional project, or requesting an assist visit. The types of activities provided through these services include assistance in benchmarking practices of successful organizations, providing information exchange and reviews of current practices through assist missions, conducting workshops on focused human performance topics, evaluating current human performance methods, including assistance in implementing self assessment programmes and providing support to safety culture enhancement programmes based on self-assessment

Web-based turbine cycle performance analysis for nuclear power plants

International Nuclear Information System (INIS)

Heo, Gyun Young; Lee, Sung Jin; Chang, Soon Heung; Choi, Seong Soo

2000-01-01

As an approach to improve the economical efficiency of operating nuclear power plants, a thermal performance analysis tool for steam turbine cycle has been developed. For the validation and the prediction of the signals used in thermal performance analysis, a few statistical signal processing techniques are integrated. The developed tool provides predicted performance calculation capability that is steady-state wet steam turbine cycle simulation, and measurement performance calculation capability which determines component- and cycle-level performance indexes. Web-based interface with all performance analysis is implemented, so even remote users can achieve performance analysis. Comparing to ASME PTC6 (Performance Test Code 6), the focusing point of the developed tool is historical performance analysis rather than single accurate performance test. The proposed signal processing techniques are validated using actual plant signals, and turbine cycle models are tested by benchmarking with a commercial thermal analysis tool

Performance improvement program: goals and experience

International Nuclear Information System (INIS)

Guglielmi, F.

2015-01-01

Following long 54 month refurbishment outage at Point Lepreau Generating Station, operational performance had fallen below industry standards in a number of areas. Leadership development and succession planning had stalled. Operational focus was low primarily due to the construction focus during refurbishment. Condition of balance of plant was poor including several long standing deficiencies. In order to improve performance, the site implemented a framework based on INPO 12-011: Focus on Improving Behaviours; Set common goals and demonstrate results; Align and engage the organization; Drive to achieve high levels of performance and sustain performance.

Performance improvement program: goals and experience

Energy Technology Data Exchange (ETDEWEB)

Guglielmi, F. [Point Lepreau Generating Station, Maces Bay, New Brunswick (Canada)

2015-07-01

Following long 54 month refurbishment outage at Point Lepreau Generating Station, operational performance had fallen below industry standards in a number of areas. Leadership development and succession planning had stalled. Operational focus was low primarily due to the construction focus during refurbishment. Condition of balance of plant was poor including several long standing deficiencies. In order to improve performance, the site implemented a framework based on INPO 12-011: Focus on Improving Behaviours; Set common goals and demonstrate results; Align and engage the organization; Drive to achieve high levels of performance and sustain performance.

Intelligent Performance Analysis with a Natural Language Interface

Science.gov (United States)

Juuso, Esko K.

2017-09-01

Performance improvement is taken as the primary goal in the asset management. Advanced data analysis is needed to efficiently integrate condition monitoring data into the operation and maintenance. Intelligent stress and condition indices have been developed for control and condition monitoring by combining generalized norms with efficient nonlinear scaling. These nonlinear scaling methodologies can also be used to handle performance measures used for management since management oriented indicators can be presented in the same scale as intelligent condition and stress indices. Performance indicators are responses of the process, machine or system to the stress contributions analyzed from process and condition monitoring data. Scaled values are directly used in intelligent temporal analysis to calculate fluctuations and trends. All these methodologies can be used in prognostics and fatigue prediction. The meanings of the variables are beneficial in extracting expert knowledge and representing information in natural language. The idea of dividing the problems into the variable specific meanings and the directions of interactions provides various improvements for performance monitoring and decision making. The integrated temporal analysis and uncertainty processing facilitates the efficient use of domain expertise. Measurements can be monitored with generalized statistical process control (GSPC) based on the same scaling functions.

Methodological approach to organizational performance improvement process

Directory of Open Access Journals (Sweden)

Marin Buble

2001-01-01

Full Text Available Organizational performance improvement is one of the fundamental enterprise tasks. This especially applies to the case when the term “performance improvement” implies efficiency improvement measured by indicators, such as ROI, ROE, ROA, or ROVA/ROI. Such tasks are very complex, requiring implementation by means of project management. In this paper, the authors propose a methodological approach to improving the organizational performance of a large enterprise.

Improvement of performance of ultra-high performance concrete based composite material added with nano materials

Directory of Open Access Journals (Sweden)

Pang Jinchang

2016-03-01

Full Text Available Ultra-high performance concrete (UHPC, a kind of composite material characterized by ultra high strength, high toughness and high durability. It has a wide application prospect in engineering practice. But there are some defects in concrete. How to improve strength and toughness of UHPC remains to be the target of researchers. To obtain UHPC with better performance, this study introduced nano-SiO2 and nano-CaCO3 into UHPC. Moreover, hydration heat analysis, X-Ray Diffraction (XRD, mercury intrusion porosimetry (MIP and nanoindentation tests were used to explore hydration process and microstructure. Double-doped nanomaterials can further enhance various mechanical performances of materials. Nano-SiO2 can promote early progress of cement hydration due to its high reaction activity and C-S-H gel generates when it reacts with cement hydration product Ca(OH2. Nano-CaCO3 mainly plays the role of crystal nucleus effect and filling effect. Under the combined action of the two, the composite structure is denser, which provides a way to improve the performance of UHPC in practical engineering.

Lean methodology for performance improvement in the trauma discharge process.

Science.gov (United States)

O'Mara, Michael Shaymus; Ramaniuk, Aliaksandr; Graymire, Vickie; Rozzell, Monica; Martin, Stacey

2014-07-01

High-volume, complex services such as trauma and acute care surgery are at risk for inefficiency. Lean process improvement can reduce health care waste. Lean allows a structured look at processes not easily amenable to analysis. We applied lean methodology to the current state of communication and discharge planning on an urban trauma service, citing areas for improvement. A lean process mapping event was held. The process map was used to identify areas for immediate analysis and intervention-defining metrics for the stakeholders. After intervention, new performance was assessed by direct data evaluation. The process was completed with an analysis of effect and plans made for addressing future focus areas. The primary area of concern identified was interservice communication. Changes centering on a standardized morning report structure reduced the number of consult questions unanswered from 67% to 34% (p = 0.0021). Physical therapy rework was reduced from 35% to 19% (p = 0.016). Patients admitted to units not designated to the trauma service had 1.6 times longer stays (p miscommunication exists around patient education at discharge. Lean process improvement is a viable means of health care analysis. When applied to a trauma service with 4,000 admissions annually, lean identifies areas ripe for improvement. Our inefficiencies surrounded communication and patient localization. Strategies arising from the input of all stakeholders led to real solutions for communication through a face-to-face morning report and identified areas for ongoing improvement. This focuses resource use and identifies areas for improvement of throughput in care delivery.

Statistical analysis of RHIC beam position monitors performance

Science.gov (United States)

Calaga, R.; Tomás, R.

2004-04-01

A detailed statistical analysis of beam position monitors (BPM) performance at RHIC is a critical factor in improving regular operations and future runs. Robust identification of malfunctioning BPMs plays an important role in any orbit or turn-by-turn analysis. Singular value decomposition and Fourier transform methods, which have evolved as powerful numerical techniques in signal processing, will aid in such identification from BPM data. This is the first attempt at RHIC to use a large set of data to statistically enhance the capability of these two techniques and determine BPM performance. A comparison from run 2003 data shows striking agreement between the two methods and hence can be used to improve BPM functioning at RHIC and possibly other accelerators.

Statistical analysis of RHIC beam position monitors performance

Directory of Open Access Journals (Sweden)

R. Calaga

2004-04-01

Full Text Available A detailed statistical analysis of beam position monitors (BPM performance at RHIC is a critical factor in improving regular operations and future runs. Robust identification of malfunctioning BPMs plays an important role in any orbit or turn-by-turn analysis. Singular value decomposition and Fourier transform methods, which have evolved as powerful numerical techniques in signal processing, will aid in such identification from BPM data. This is the first attempt at RHIC to use a large set of data to statistically enhance the capability of these two techniques and determine BPM performance. A comparison from run 2003 data shows striking agreement between the two methods and hence can be used to improve BPM functioning at RHIC and possibly other accelerators.

Driving forces and barriers to improved energy performance of buildings: an analysis of energy performance of Swedish buildings, 2000-2006

Energy Technology Data Exchange (ETDEWEB)

Fuglseth, Bente Beckstroem

2008-06-15

The building sector is responsible for a substantial part of energy use and green house gas emissions in Europe. This report explores driving forces and barriers to improved energy performance of buildings, using the Swedish building sector as a case. The development of energy performance of buildings in Sweden from 2000 until 2006 is explored by applying a threefold understanding of energy performance of buildings: substitution from fossil fuels to renewable energy, conversion from electrical heating to thermal energy and reduction in energy demand. Three explanatory approaches are used to analyse driving forces and barriers to improved energy performance: the techno-economic approach stresses the physical aspects of infrastructure and technologies, the institutional approach emphasizes the role of institutional factors, while the regulative approach focuses on formal rules and laws. The study concludes that all factors have promoted substitution of fossil fuels with renewable energy, while they have prevented conversion from electrical heating to thermal energy and reduction in energy demand. (author). 95 refs

Performance Results of CMMI-Based Process Improvement

National Research Council Canada - National Science Library

Gibson, Diane L; Goldenson, Dennis R; Kost, Keith

2006-01-01

.... There now is evidence that process improvement using the CMMI Product Suite can result in improvements in schedule and cost performance, product quality, return on investment and other measures of performance outcome...

The impact of multi-criteria performance measurement on business performance improvement

OpenAIRE

Kasie, Fentahun Moges; Belay, Alemu Moges

2013-01-01

Purpose: The purpose of this paper is to investigate the relationship between multi-criteria performance measurement (MCPM) practice and business performance improvement using the raw data collected from 33 selected manufacturing companies. In addition, it proposes modified MCPM model as an effective approach to improve business performance of manufacturing companies. Design/methodology/approach:Research paper. Primary and secondary data were collected using questionnaire survey, interview an...

Containment performance improvement program

International Nuclear Information System (INIS)

Beckner, W.; Mitchell, J.; Soffer, L.; Chow, E.; Lane, J.; Ridgely, J.

1990-01-01

The Containment Performance Improvement (CPI) program has been one of the main elements in the US Nuclear Regulatory Commission's (NRC's) integrated approach to closure of severe accident issues for US nuclear power plants. During the course of the program, results from various probabilistic risk assessment (PRA) studies and from severe accident research programs for the five US containment types have been examined to identify significant containment challenges and to evaluate potential improvements. The five containment types considered are: the boiling water reactor (BMR) Mark I containment, the BWR Mark II containment, the BWR Mark III containment, the pressurized water reactor (PWR) ice condenser containment, and the PWR dry containments (including both subatmospheric and large subtypes). The focus of the CPI program has been containment performance and accident mitigation, however, insights are also being obtained in the areas of accident prevention and accident management

A Mathematical Model to Improve the Performance of Logistics Network

Directory of Open Access Journals (Sweden)

Muhammad Izman Herdiansyah

2012-01-01

Full Text Available The role of logistics nowadays is expanding from just providing transportation and warehousing to offering total integrated logistics. To remain competitive in the global market environment, business enterprises need to improve their logistics operations performance. The improvement will be achieved when we can provide a comprehensive analysis and optimize its network performances. In this paper, a mixed integer linier model for optimizing logistics network performance is developed. It provides a single-product multi-period multi-facilities model, as well as the multi-product concept. The problem is modeled in form of a network flow problem with the main objective to minimize total logistics cost. The problem can be solved using commercial linear programming package like CPLEX or LINDO. Even in small case, the solver in Excel may also be used to solve such model.Keywords: logistics network, integrated model, mathematical programming, network optimization

Analysis and Improvement of Fireworks Algorithm

Directory of Open Access Journals (Sweden)

Xi-Guang Li

2017-02-01

Full Text Available The Fireworks Algorithm is a recently developed swarm intelligence algorithm to simulate the explosion process of fireworks. Based on the analysis of each operator of Fireworks Algorithm (FWA, this paper improves the FWA and proves that the improved algorithm converges to the global optimal solution with probability 1. The proposed algorithm improves the goal of further boosting performance and achieving global optimization where mainly include the following strategies. Firstly using the opposition-based learning initialization population. Secondly a new explosion amplitude mechanism for the optimal firework is proposed. In addition, the adaptive t-distribution mutation for non-optimal individuals and elite opposition-based learning for the optimal individual are used. Finally, a new selection strategy, namely Disruptive Selection, is proposed to reduce the running time of the algorithm compared with FWA. In our simulation, we apply the CEC2013 standard functions and compare the proposed algorithm (IFWA with SPSO2011, FWA, EFWA and dynFWA. The results show that the proposed algorithm has better overall performance on the test functions.

Improving Software Performance in the Compute Unified Device Architecture

Directory of Open Access Journals (Sweden)

Alexandru PIRJAN

2010-01-01

Full Text Available This paper analyzes several aspects regarding the improvement of software performance for applications written in the Compute Unified Device Architecture CUDA. We address an issue of great importance when programming a CUDA application: the Graphics Processing Unit’s (GPU’s memory management through ranspose ernels. We also benchmark and evaluate the performance for progressively optimizing a transposing matrix application in CUDA. One particular interest was to research how well the optimization techniques, applied to software application written in CUDA, scale to the latest generation of general-purpose graphic processors units (GPGPU, like the Fermi architecture implemented in the GTX480 and the previous architecture implemented in GTX280. Lately, there has been a lot of interest in the literature for this type of optimization analysis, but none of the works so far (to our best knowledge tried to validate if the optimizations can apply to a GPU from the latest Fermi architecture and how well does the Fermi architecture scale to these software performance improving techniques.

Performance improvement tool for Thai make–to–order manufacturing

Directory of Open Access Journals (Sweden)

Apichat Sopadang

2012-02-01

Full Text Available This paper presents a framework to improve a performance of shop floor control for Thai make-to-order (MTO smalland medium enterprises (SMEs. Integrated definition for function modeling is exploited to explore activities and relate ofcomponents. In-depth interview with experts and practitioners in the case study is provided useful information. The empiricalstudy is evaluated to suit for using the finalized SHEN model as a benchmark. Factor analysis is performed to find simplifiedinformation from variables. The data are collected from experience respondents by using a designed questionnaire. Eachobserved variable is assigned to test validity and reliability by factor loading and Cronbach’s alpha, respectively. The resultsshow that finalized SHEN can use as a performance improvement tool for Thai MTO SMEs. For example principle 11 is tested.Each observed variable has covariance value between 0.380-0.873. The value of reliability Cronbach’s alpha for this factoris shown 0.869. Based on the scree plot, it is asserted that 5 observed variables are correctly formed in the same principle.

Optimal setpoint generation for improved fuel temperature performance

International Nuclear Information System (INIS)

Johns, R.M.; Edwards, R.M.

1995-01-01

Nuclear power plant systems feature a high degree of non-linearity and high noise level, and the performance of conventional control systems may degrade when power plants operate under a wide range of conditions, such as startup, test, shutdown, etc. The conventional control system is not intended for nuclear power plant full-range operation. This is the reason that, at present, nuclear power plants rely on manual operations for most wide-range control and only use automatic control around nominal conditions. The availability of new powerful control techniques and mathematical tools has motivated an expanding research effort toward the development of the advanced hybrid feedforward-feedback control system. The planned command input is based on the analysis of a system model in some form in order to improve the performance of the overall system. The use of a feedforward optimal controller to improve the fuel temperature response to a step change in desired reactor power is being demonstrated. The Penn State TRIGA reactor is used as the basis of the reactor model so that validation of the controller may be shown

MITG post-test analysis and design improvements

International Nuclear Information System (INIS)

Schock, A.

1983-01-01

The design, performance analysis, and key attributes of the Modular Isotopic Thermoelectric Generator (MITG) were described in a 1981 IECEC paper; and the design, fabrication, and testing of prototypical MITG test assemblies were described in preceding papers in these proceedings. Each test assembly simulated a typical modular slice of the flight generator. The present paper describes a detailed thermal-stress analysis, which identified the causes of stress-related problems observed during the tests. It then describes how additional analyses were used to evaluate design changes to alleviate those problems. Additional design improvements are discussed in the next paper in these proceedings, which also describes revised fabrication procedures and updated performance estimates for the generator

Insight analysis of biplane Wells turbine performance

International Nuclear Information System (INIS)

Shaaban, S.

2012-01-01

Highlights: ► Downstream rotor reduces overall turbine efficiency during normal operation. ► Recirculation behind downstream rotor significantly reduces the torque delivered by the turbine. ► Upstream rotor significantly affects downstream rotor performance even at high gap to chord ratios. ► Downstream rotor produces only 10–30% of the turbine power despite its feasible exergy level. ► The downstream rotor significantly delays turbine start up. - Abstract: Wells turbines are very promising in converting wave energy. Improving the design and performance of Wells turbines requires deep understanding of the energy conversion process and losses mechanisms of these energy convertors. The performance of a biplane Wells turbine having 45° stagger angle between rotors is numerically investigated. The turbine performance is simulated by solving the steady 3D incompressible Reynolds Averaged Navier–Stocks equation (RANS). The present numerical investigation shows that the upstream rotor significantly affects the downstream rotor performance even at high gap-to-chord ratio (G/c = 1.4). The contribution of the downstream rotor in the overall biplane Wells turbine performance is limited. The downstream rotor torque represents 10–30% of the total turbine torque and the upstream rotor efficiency is 1.5–5 times the downstream rotor efficiency at normal operating conditions. Exergy analysis shows that the downstream rotor is the main component that reduces the turbine second law efficiency. The blade exergy increases from hub to tip and decreases from leading edge to trailing edge. Therefore, 3D blade profile optimization is essential for substantial improvement of the energy conversion process. Improving the design of the inter-rotors zone can significantly improve biplane Wells turbine performance. Future biplane Wells turbine designs should focus essentially on improving the downstream rotor performance.

Performance analysis of PV plants: Optimization for improving profitability

International Nuclear Information System (INIS)

Díez-Mediavilla, M.; Alonso-Tristán, C.; Rodríguez-Amigo, M.C.; García-Calderón, T.; Dieste-Velasco, M.I.

2012-01-01

Highlights: ► Real PV production from two 100 kW p grid-connected installations is conducted. ► Data sets on production were collected over an entire year. ► Economic results highlight the importance of properly selecting the system components. ► Performance of PV plants is directly related to improvements of all components. - Abstract: A study is conducted of real PV production from two 100 kW p grid-connected installations located in the same area, both of which experience the same fluctuations in temperature and radiation. Data sets on production were collected over an entire year and both installations were compared under various levels of radiation. The installations were assembled with mono-Si panels, mounted on the same support system, and the power supply was equal for the inverter and the measurement system; the same parameters were also employed for the wiring, and electrical losses were calculated in both cases. The results, in economic terms, highlight the importance of properly selecting the system components and the design parameters for maximum profitability.

Improving operational performance by influencing shopfloor behavior via performance management practices

NARCIS (Netherlands)

de Leeuw, S.L.J.M.; van den Berg, J.P.

2011-01-01

It is generally believed that companies applying performance management practices outperform those that do not measure and manage their performance. Studies examining the link between performance management and performance improvement implicitly assume that performance management affects behavior of

Importance-performance analysis as a guide for hospitals in improving their provision of services.

Science.gov (United States)

Whynes, D K; Reed, G

1995-11-01

As a result of the 1990 National Health Services Act, hospitals now compete with one another to win service contracts. A high level of service quality represents an important ingredient of a successful competitive strategy, yet, in general, hospitals have little external information on which to base quality decisions. Specifically, in their efforts to win contracts from fundholding general practitioners, hospitals require information on that which these purchasers deem important with respect to quality, and on how these purchasers assess the quality of their current service performance. The problem is complicated by the fact that hospital service quality, in itself, is multi-dimensional. In other areas of economic activity, the information problem has been resolved by importance-performance analysis and this paper reports the findings of such an analysis conducted for hosptials in the Trent region. The importance and performance service quality ratings of fundholders were obtained from a questionnaire survey and used in a particular variant of importance-performance analysis, which possesses certain advantages over more conventional approaches. In addition to providing empirical data on the determinants of service quality, as perceived by the purchasers of hospital services, this paper demonstrates how such information can be successfully employed in a quality enhancement strategy.

Develop feedback system for intelligent dynamic resource allocation to improve application performance.

Energy Technology Data Exchange (ETDEWEB)

Gentile, Ann C.; Brandt, James M.; Tucker, Thomas (Open Grid Computing, Inc., Austin, TX); Thompson, David

2011-09-01

This report provides documentation for the completion of the Sandia Level II milestone 'Develop feedback system for intelligent dynamic resource allocation to improve application performance'. This milestone demonstrates the use of a scalable data collection analysis and feedback system that enables insight into how an application is utilizing the hardware resources of a high performance computing (HPC) platform in a lightweight fashion. Further we demonstrate utilizing the same mechanisms used for transporting data for remote analysis and visualization to provide low latency run-time feedback to applications. The ultimate goal of this body of work is performance optimization in the face of the ever increasing size and complexity of HPC systems.

Improving Mobility Performance in Wheelchair Basketball.

Science.gov (United States)

Veeger, Thom T J; De Witte, Annemarie M H; Berger, Monique A M; Van Der Slikke, Rienk M A; Veeger, Dirkjan H E J; Hoozemans, Marco J M

2017-10-16

This study aimed to investigate which characteristics of athlete, wheelchair and athlete-wheelchair interface are the best predictors of wheelchair basketball mobility performance. Sixty experienced wheelchair basketball players performed a wheelchair mobility performance test to assess their mobility performance. To determine which variables were the best predictors of mobility performance, forward stepwise linear regression analyses were performed on a set of 33 characteristics, including ten athlete, nineteen wheelchair and four athlete-wheelchair interface characteristics. Eight of the characteristics turned out to be significant predictors of wheelchair basketball mobility performance. Classification, experience, maximal isometric force, wheel axis height and hand rim diameter - which both interchangeable with each other and wheel diameter - camber angle, and the vertical distance between shoulder and rear wheel axis - which was interchangeable with seat height - were positively associated with mobility performance. The vertical distance between the front seat and the footrest was negatively associated with mobility performance. With this insight, coaches and biomechanical specialists are provided with statistical findings to determine which characteristics they could focus on best to improve mobility performance. Six out of eight predictors are modifiable and can be optimized to improve mobility performance. These adjustments could be carried out both in training (maximal isometric force) and in wheelchair configurations (e.g. camber angle).

Artificial Astrocytes Improve Neural Network Performance

Science.gov (United States)

Porto-Pazos, Ana B.; Veiguela, Noha; Mesejo, Pablo; Navarrete, Marta; Alvarellos, Alberto; Ibáñez, Oscar; Pazos, Alejandro; Araque, Alfonso

2011-01-01

Compelling evidence indicates the existence of bidirectional communication between astrocytes and neurons. Astrocytes, a type of glial cells classically considered to be passive supportive cells, have been recently demonstrated to be actively involved in the processing and regulation of synaptic information, suggesting that brain function arises from the activity of neuron-glia networks. However, the actual impact of astrocytes in neural network function is largely unknown and its application in artificial intelligence remains untested. We have investigated the consequences of including artificial astrocytes, which present the biologically defined properties involved in astrocyte-neuron communication, on artificial neural network performance. Using connectionist systems and evolutionary algorithms, we have compared the performance of artificial neural networks (NN) and artificial neuron-glia networks (NGN) to solve classification problems. We show that the degree of success of NGN is superior to NN. Analysis of performances of NN with different number of neurons or different architectures indicate that the effects of NGN cannot be accounted for an increased number of network elements, but rather they are specifically due to astrocytes. Furthermore, the relative efficacy of NGN vs. NN increases as the complexity of the network increases. These results indicate that artificial astrocytes improve neural network performance, and established the concept of Artificial Neuron-Glia Networks, which represents a novel concept in Artificial Intelligence with implications in computational science as well as in the understanding of brain function. PMID:21526157

Artificial astrocytes improve neural network performance.

Directory of Open Access Journals (Sweden)

Ana B Porto-Pazos

Full Text Available Compelling evidence indicates the existence of bidirectional communication between astrocytes and neurons. Astrocytes, a type of glial cells classically considered to be passive supportive cells, have been recently demonstrated to be actively involved in the processing and regulation of synaptic information, suggesting that brain function arises from the activity of neuron-glia networks. However, the actual impact of astrocytes in neural network function is largely unknown and its application in artificial intelligence remains untested. We have investigated the consequences of including artificial astrocytes, which present the biologically defined properties involved in astrocyte-neuron communication, on artificial neural network performance. Using connectionist systems and evolutionary algorithms, we have compared the performance of artificial neural networks (NN and artificial neuron-glia networks (NGN to solve classification problems. We show that the degree of success of NGN is superior to NN. Analysis of performances of NN with different number of neurons or different architectures indicate that the effects of NGN cannot be accounted for an increased number of network elements, but rather they are specifically due to astrocytes. Furthermore, the relative efficacy of NGN vs. NN increases as the complexity of the network increases. These results indicate that artificial astrocytes improve neural network performance, and established the concept of Artificial Neuron-Glia Networks, which represents a novel concept in Artificial Intelligence with implications in computational science as well as in the understanding of brain function.

Artificial astrocytes improve neural network performance.

Science.gov (United States)

Porto-Pazos, Ana B; Veiguela, Noha; Mesejo, Pablo; Navarrete, Marta; Alvarellos, Alberto; Ibáñez, Oscar; Pazos, Alejandro; Araque, Alfonso

2011-04-19

Compelling evidence indicates the existence of bidirectional communication between astrocytes and neurons. Astrocytes, a type of glial cells classically considered to be passive supportive cells, have been recently demonstrated to be actively involved in the processing and regulation of synaptic information, suggesting that brain function arises from the activity of neuron-glia networks. However, the actual impact of astrocytes in neural network function is largely unknown and its application in artificial intelligence remains untested. We have investigated the consequences of including artificial astrocytes, which present the biologically defined properties involved in astrocyte-neuron communication, on artificial neural network performance. Using connectionist systems and evolutionary algorithms, we have compared the performance of artificial neural networks (NN) and artificial neuron-glia networks (NGN) to solve classification problems. We show that the degree of success of NGN is superior to NN. Analysis of performances of NN with different number of neurons or different architectures indicate that the effects of NGN cannot be accounted for an increased number of network elements, but rather they are specifically due to astrocytes. Furthermore, the relative efficacy of NGN vs. NN increases as the complexity of the network increases. These results indicate that artificial astrocytes improve neural network performance, and established the concept of Artificial Neuron-Glia Networks, which represents a novel concept in Artificial Intelligence with implications in computational science as well as in the understanding of brain function.

Improving emissions inventories in North America through systematic analysis of model performance during ICARTT and MILAGRO

Science.gov (United States)

Mena, Marcelo Andres

During 2004 and 2006 the University of Iowa provided air quality forecast support for flight planning of the ICARTT and MILAGRO field campaigns. A method for improvement of model performance in comparison to observations is showed. The method allows identifying sources of model error from boundary conditions and emissions inventories. Simultaneous analysis of horizontal interpolation of model error and error covariance showed that error in ozone modeling is highly correlated to the error of its precursors, and that there is geographical correlation also. During ICARTT ozone modeling error was improved by updating from the National Emissions Inventory from 1999 and 2001, and furthermore by updating large point source emissions from continuous monitoring data. Further improvements were achieved by reducing area emissions of NOx y 60% for states in the Southeast United States. Ozone error was highly correlated to NOy error during this campaign. Also ozone production in the United States was most sensitive to NOx emissions. During MILAGRO model performance in terms of correlation coefficients was higher, but model error in ozone modeling was high due overestimation of NOx and VOC emissions in Mexico City during forecasting. Large model improvements were shown by decreasing NOx emissions in Mexico City by 50% and VOC by 60%. Recurring ozone error is spatially correlated to CO and NOy error. Sensitivity studies show that Mexico City aerosol can reduce regional photolysis rates by 40% and ozone formation by 5-10%. Mexico City emissions can enhance NOy and O3 concentrations over the Gulf of Mexico in up to 10-20%. Mexico City emissions can convert regional ozone production regimes from VOC to NOx limited. A method of interpolation of observations along flight tracks is shown, which can be used to infer on the direction of outflow plumes. The use of ratios such as O3/NOy and NOx/NOy can be used to provide information on chemical characteristics of the plume, such as age

Evaluating Service Quality from Patients' Perceptions: Application of Importance-performance Analysis Method.

Science.gov (United States)

Mohebifar, Rafat; Hasani, Hana; Barikani, Ameneh; Rafiei, Sima

2016-08-01

Providing high service quality is one of the main functions of health systems. Measuring service quality is the basic prerequisite for improving quality. The aim of this study was to evaluate the quality of service in teaching hospitals using importance-performance analysis matrix. A descriptive-analytic study was conducted through a cross-sectional method in six academic hospitals of Qazvin, Iran, in 2012. A total of 360 patients contributed to the study. The sampling technique was stratified random sampling. Required data were collected based on a standard questionnaire (SERVQUAL). Data analysis was done through SPSS version 18 statistical software and importance-performance analysis matrix. The results showed a significant gap between importance and performance in all five dimensions of service quality (p quality gap and "responsiveness" had the lowest gap (1.97). Also, according to findings, reliability and assurance were in Quadrant (I), empathy was in Quadrant (II), and tangibles and responsiveness were in Quadrant (IV) of the importance-performance matrix. The negative gap in all dimensions of quality shows that quality improvement is necessary in all dimensions. Using quality and diagnosis measurement instruments such as importance-performance analysis will help hospital managers with planning of service quality improvement and achieving long-term goals.

South Bank Coke Ovens heating performance improvements

Energy Technology Data Exchange (ETDEWEB)

Fraser, A.J. [South Bank Coke Ovens (United Kingdom)

1995-12-31

The coke oven batteries at South Bank Coke Ovens had a history of refractory failure, overheating, and poor environmental performance despite repeated attempts to solve the problem. The fundamental design was poor, but previous upgrade attempts had a history of short term improvements followed by renewed decline, suggesting that the problem may not merely with the equipment. An audit of the area showed multiple morale, equipment and communications problems, although a significant proportion of the workforce were interested in improving the situation. A group of those interested in performance improvements was called together and objectives agreed upon. Communications were upgraded and problem walls analysed for their particular weaknesses. A team approach was used for maintenance, leading to slowly improving pushing emission factors. Temperature control equipment ensured better environmental performance and lower electricity consumption. 5 refs., 3 figs.

Reducing the occurrence of plant events through improved human performance

International Nuclear Information System (INIS)

Ross, T.; Burkhart, A.D.

1993-01-01

During a routine control room surveillance, the reactor operator is distracted by an alarming secondary annunciator and a telephone call. When the reactor operator resumes the surveillance, he inadvertently performs the procedural steps out of order. This causes a reportable nuclear event. How can procedure-related human performance problems such as this be prevented? The question is vitally important for the nuclear industry. The U.S. Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data observed, open-quotes With the perceived reduction in the number of events caused by equipment failures, INPO and other industry groups and human performance experts agree that a key to continued improvement in plant performance and safety is improved human performance.close quotes In fact, open-quotes more than 50% of the reportable events occurring at nuclear power plants involve human error.close quotes Prevention (or correction) of a human performance problem is normally based on properly balancing the following three factors: (1) supervisory involvement; (2) personnel training; and (3) procedures. The nuclear industry is implementing a formula known as ACME, which better balances supervisory involvement, personnel training, and procedures. Webster's New World Dictionary defines acme as the highest point, the peak. ACME human performance is the goal: ACME Adherence to and use of procedures; Self-Checking; Management Involvement; and Event Investigations

Parametric Study for MOV Performance Improvement Using PPM Program

Energy Technology Data Exchange (ETDEWEB)

Lee, Seungho; Seon, Juhyoung; Han, Bongsub [SOOSAN INDUSTRIES, Seoul (Korea, Republic of)

2016-10-15

Nuclear power plants mainly use Air Operated Valve(hereinafter referred to as AOV) and Motor Operator Valve(hereinafter referred to as MOV) for protecting system, blocking and controlling flow. Field test(static, dynamic test) results and performance prediction program are used to evaluate if MOV currently installed on nuclear power plants has the operational performance. The improvement of operating performance for Flexible Gate valve was confirmed on changing input variables of performance program(PPM). here are several methods through reviewing design basis, changes operating procedures and maintenance work of stem(or packing, etc.) to improve operating performance of MOV generally installed in the nuclear power plants. This study verified the changes of the MOV operating performance through the improvement of stem and hydraulic parts(seat, guide etc.). Especially, MOV operating performance was much greater improved when the Disk Seat Angle was decreasing. Generally, improvement work to minimize friction of seat, disk and guide is limited and dynamic diagnostic testing has to be performed with change in valve factor for improvement of hydraulic parts.

An Adaptive Middleware for Improved Computational Performance

DEFF Research Database (Denmark)

Bonnichsen, Lars Frydendal

, we are improving computational performance by exploiting modern hardware features, such as dynamic voltage-frequency scaling and transactional memory. Adapting software is an iterative process, requiring that we continually revisit it to meet new requirements or realities; a time consuming process......The performance improvements in computer systems over the past 60 years have been fueled by an exponential increase in energy efficiency. In recent years, the phenomenon known as the end of Dennard’s scaling has slowed energy efficiency improvements — but improving computer energy efficiency...... is more important now than ever. Traditionally, most improvements in computer energy efficiency have come from improvements in lithography — the ability to produce smaller transistors — and computer architecture - the ability to apply those transistors efficiently. Since the end of scaling, we have seen...

Improving The Performance of Customer Loyalty of Online Ticketing in Indonesia's Showbiz Industry

Science.gov (United States)

Dachyar, M.; Athory, E. S.

2015-06-01

Currently the entertainment industry is adopting online ticketing for supporting business from main products to profitability improvement. E-loyalty needs to be examined because are deals with less loyal customer characteristic. The sample are 249 customers whom have purchased for tickets online at least once. Data was gathered by questionnaires and analyzed by Path Analysis and Importance - Performance Analysis. The findings of the research indicate that satisfaction has the strongest relationship to e-loyalty. This study provides four improvement alternatives as a form of new business development strategy for showbiz industry in Indonesia.

Five training sessions improves 3000 meter running performance.

Science.gov (United States)

Riiser, A; Ripe, S; Aadland, E

2015-12-01

The primary aim of the present study was to evaluate the effect of two weeks of endurance training on 3000-meter running performance. Secondary we wanted to assess the relationship between baseline running performance and change in running performance over the intervention period. We assigned 36 military recruits to a training group (N.=28) and a control group. The training group was randomly allocated to one of three sub-groups: 1) a 3000 meter group (test race); 2) a 4x4-minutes high-intensity interval group; 3) a continuous training group. The training group exercised five times over a two-week period. The training group improved its 3000 meter running performance with 50 seconds (6%) compared to the control group (P=0.003). Moreover, all sub-groups improved their performance by 37 to 73 seconds (4-8%) compared to the control group (Ptraining group. We conclude that five endurance training sessions improved 3000 meter running performance and the slowest runners achieved the greatest improvement in running performance.

Positioning performance improvements with European multiple-frequency satellite navigation - Galileo

Science.gov (United States)

Ji, Shengyue

2008-10-01

The rapid development of Global Positioning System has demonstrated the advantages of satellite based navigation systems. In near future, there will be a number of Global Navigation Satellite System (GNSS) available, i.e. modernized GPS, Galileo, restored GLONASS, BeiDou and many other regional GNSS augmentation systems. Undoubtedly, the new GNSS systems will significantly improve navigation performance over current GPS, with a better satellite coverage and multiple satellite signal bands. In this dissertation, the positioning performance improvement of new GNSS has been investigated based on both theoretical analysis and numerical study. First of all, the navigation performance of new GNSS systems has been analyzed, particularly for urban applications. The study has demonstrated that Receiver Autonomous Integrity Monitoring (RAIM) performance can be significantly improved with multiple satellite constellations, although the position accuracy improvement is limited. Based on a three-dimensional urban building model in Hong Kong streets, it is found that positioning availability is still very low in high-rising urban areas, even with three GNSS systems. On the other hand, the discontinuity of navigation solutions is significantly reduced with the combined constellations. Therefore, it is possible to use cheap DR systems to bridge the gaps of GNSS positioning, with high accuracy. Secondly, the ambiguity resolution performance has been investigated with Galileo multiple frequency band signals. The ambiguity resolution performance of three different algorithms is compared, including CAR, ILS and improved CAR methods (a new method proposed in this study). For short baselines, with four frequency Galileo data, it is highly possible to achieve reliable single epoch ambiguity resolution, when the carrier phase noise level is reasonably low (i.e. less than 6mm). For long baselines (up to 800 km), the integer ambiguity can be determined within 1 min on average. Ambiguity

Motor-Enriched Learning Activities Can Improve Mathematical Performance in Preadolescent Children

Science.gov (United States)

Beck, Mikkel M.; Lind, Rune R.; Geertsen, Svend S.; Ritz, Christian; Lundbye-Jensen, Jesper; Wienecke, Jacob

2016-01-01

Objective: An emerging field of research indicates that physical activity can benefit cognitive functions and academic achievements in children. However, less is known about how academic achievements can benefit from specific types of motor activities (e.g., fine and gross) integrated into learning activities. Thus, the aim of this study was to investigate whether fine or gross motor activity integrated into math lessons (i.e., motor-enrichment) could improve children's mathematical performance. Methods: A 6-week within school cluster-randomized intervention study investigated the effects of motor-enriched mathematical teaching in Danish preadolescent children (n = 165, age = 7.5 ± 0.02 years). Three groups were included: a control group (CON), which received non-motor enriched conventional mathematical teaching, a fine motor math group (FMM) and a gross motor math group (GMM), which received mathematical teaching enriched with fine and gross motor activity, respectively. The children were tested before (T0), immediately after (T1) and 8 weeks after the intervention (T2). A standardized mathematical test (50 tasks) was used to evaluate mathematical performance. Furthermore, it was investigated whether motor-enriched math was accompanied by different effects in low and normal math performers. Additionally, the study investigated the potential contribution of cognitive functions and motor skills on mathematical performance. Results: All groups improved their mathematical performance from T0 to T1. However, from T0 to T1, the improvement was significantly greater in GMM compared to FMM (1.87 ± 0.71 correct answers) (p = 0.02). At T2 no significant differences in mathematical performance were observed. A subgroup analysis revealed that normal math-performers benefitted from GMM compared to both CON 1.78 ± 0.73 correct answers (p = 0.04) and FMM 2.14 ± 0.72 correct answers (p = 0.008). These effects were not observed in low math-performers. The effects were partly

Experience measuring performance improvement in multiphase picture archiving and communications systems implementations

OpenAIRE

Reed, Gary; Reed, Deborah Hobe

1999-01-01

When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial dat...

Introducing artificial depth cues to improve task performance in ITER maintenance actions

International Nuclear Information System (INIS)

Heemskerk, C.J.M.; Eendebak, P.T.; Schropp, G.Y.R.; Hermes, H.V.; Elzendoorn, B.S.Q.; Magielsen, A.J.

2013-01-01

Highlights: ► Operators regard lack of 3D perception as primary factor hindering remote maintenance. ► Promising techniques to improve depth perception are depth gauges and stereo vision. ► First experiment shows artificial depth gauges need to be designed with care. ► Second experiment shows that stereo vision improves task performance significantly. -- Abstract: Maintenance operations on ITER tokamak components will be largely performed by remote handling. In previous work it was shown that representative maintenance tasks could be performed significantly faster with direct visual feedback than with camera feedback. In post-test interviews, operators indicated that they regarded the lack of 3D perception as the primary factor hindering their performance. This paper discusses various techniques to improve depth perception in teleoperation, including stereo vision, head tracking, virtual camera views and depth gauges. The most promising techniques were tested. Performance metrics included time-to-complete, path analysis and operator work-load. In a first experiment, artificial depth gauges views were tested in a 1:1 scale hardware testbed with mechanical master-slave manipulators handled by experienced operators. Robust real-time image processing was achieved with marker-based objects. The simple depth gauge and graphical overlay did not significantly improve task performance. Operators commented on their view of the task being “obstructed” by the graphical overlay, and the depth gauge was judged not very informative. In a second experiment, real time tracking was combined with VR display including stereo and head tracking. While stereo was found to improve the task performance significantly over the 1 camera (mono) condition, head tracking unexpectedly did not

Introducing artificial depth cues to improve task performance in ITER maintenance actions

Energy Technology Data Exchange (ETDEWEB)

Heemskerk, C.J.M., E-mail: c.heemskerk@heemskerk-innovative.nl [Heemskerk Innovative Technology, Sassenheim (Netherlands); Eendebak, P.T. [TNO Netherlands Organisation for Applied Scientific Research (Netherlands); Schropp, G.Y.R. [Heemskerk Innovative Technology, Sassenheim (Netherlands); Hermes, H.V. [TU Eindhoven (Netherlands); Elzendoorn, B.S.Q. [FOM Institute DIFFER (Dutch Institute for Fundamental Energy Research), Association EURATOM-FOM, Partner in the Trilateral Euregio Cluster, P.O. Box 1207, 3430 BE Nieuwegein (Netherlands); Magielsen, A.J. [NRG, P.O. Box 25, 1755 ZG Petten (Netherlands)

2013-10-15

Highlights: ► Operators regard lack of 3D perception as primary factor hindering remote maintenance. ► Promising techniques to improve depth perception are depth gauges and stereo vision. ► First experiment shows artificial depth gauges need to be designed with care. ► Second experiment shows that stereo vision improves task performance significantly. -- Abstract: Maintenance operations on ITER tokamak components will be largely performed by remote handling. In previous work it was shown that representative maintenance tasks could be performed significantly faster with direct visual feedback than with camera feedback. In post-test interviews, operators indicated that they regarded the lack of 3D perception as the primary factor hindering their performance. This paper discusses various techniques to improve depth perception in teleoperation, including stereo vision, head tracking, virtual camera views and depth gauges. The most promising techniques were tested. Performance metrics included time-to-complete, path analysis and operator work-load. In a first experiment, artificial depth gauges views were tested in a 1:1 scale hardware testbed with mechanical master-slave manipulators handled by experienced operators. Robust real-time image processing was achieved with marker-based objects. The simple depth gauge and graphical overlay did not significantly improve task performance. Operators commented on their view of the task being “obstructed” by the graphical overlay, and the depth gauge was judged not very informative. In a second experiment, real time tracking was combined with VR display including stereo and head tracking. While stereo was found to improve the task performance significantly over the 1 camera (mono) condition, head tracking unexpectedly did not.

Analysis for Parallel Execution without Performing Hardware/Software Co-simulation

OpenAIRE

Muhammad Rashid

2014-01-01

Hardware/software co-simulation improves the performance of embedded applications by executing the applications on a virtual platform before the actual hardware is available in silicon. However, the virtual platform of the target architecture is often not available during early stages of the embedded design flow. Consequently, analysis for parallel execution without performing hardware/software co-simulation is required. This article presents an analysis methodology for parallel execution of ...

MCNP Progress & Performance Improvements

Energy Technology Data Exchange (ETDEWEB)

Brown, Forrest B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bull, Jeffrey S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rising, Michael Evan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-04-14

Twenty-eight slides give information about the work of the US DOE/NNSA Nuclear Criticality Safety Program on MCNP6 under the following headings: MCNP6.1.1 Release, with ENDF/B-VII.1; Verification/Validation; User Support & Training; Performance Improvements; and Work in Progress. Whisper methodology will be incorporated into the code, and run speed should be increased.

On improving the performance of nonphotochemical quenching in CP29 light-harvesting antenna complex

Energy Technology Data Exchange (ETDEWEB)

Berman, Gennady P. [Theoretical Division, T-4, Los Alamos National Laboratory, and the New Mexico Consortium, Los Alamos, NM 87544 (United States); Nesterov, Alexander I., E-mail: nesterov@cencar.udg.mx [Departamento de Física, CUCEI, Universidad de Guadalajara, Av. Revolución 1500, Guadalajara, CP 44420, Jalisco (Mexico); Sayre, Richard T. [Biological Division, B-11, Los Alamos National Laboratory, and the New Mexico Consortium, Los Alamos, NM 87544 (United States); Still, Susanne [Department of Information and Computer Sciences, and Department of Physics and Astronomy, University of Hawaii at Mānoa, 1860 East–West Road, Honolulu, HI 96822 (United States)

2016-03-22

We model and simulate the performance of charge-transfer in nonphotochemical quenching (NPQ) in the CP29 light-harvesting antenna-complex associated with photosystem II (PSII). The model consists of five discrete excitonic energy states and two sinks, responsible for the potentially damaging processes and charge-transfer channels, respectively. We demonstrate that by varying (i) the parameters of the chlorophyll-based dimer, (ii) the resonant properties of the protein-solvent environment interaction, and (iii) the energy transfer rates to the sinks, one can significantly improve the performance of the NPQ. Our analysis suggests strategies for improving the performance of the NPQ in response to environmental changes, and may stimulate experimental verification. - Highlights: • Improvement of the efficiency of the charge-transfer nonphotochemical quenching in CP29. • Strategy for restoring the NPQ efficiency when the environment changes. • By changing of energy transfer rates to the sinks, one can significantly improve the performance of the NPQ.

TRAC analysis of passive containment cooling system performance

International Nuclear Information System (INIS)

Arai, Kenji; Kataoka, Kazuyoshi; Nagasaka, Hideo

1993-01-01

A passive containment cooling system (PCCS) is a promising concept to improve the reliability of decay heat removal during an accident. Toshiba has carried out analytical studies for PCCS development in addition to experimental studies, using a best estimate thermal hydraulic computer code TRAC. In order to establish an analytical model for the PCCS performance analysis, it is necessary for the analytical model to be qualified against experimental results and thoroughly address the phenomena important for PCCS performance analysis. In this paper, the TRAC qualification for PCCS application is reported. A TRAC model has been verified against a drain line break simulation test conducted at the PCCS integral test facility, GIRAFFE. The result shows that the TRAC model can accurately predict the major system response and the PCCS performance in the drain line break test. In addition, the results of several sensitivity analyses, showing various points concerning the modeling in the PCCS performance analysis, have been reported. The analyses have been carried out for the SBWR and the analytical points are closely related to important phenomena which can affect PCCS performance

Sodium bicarbonate improves swimming performance.

Science.gov (United States)

Lindh, A M; Peyrebrune, M C; Ingham, S A; Bailey, D M; Folland, J P

2008-06-01

Sodium bicarbonate ingestion has been shown to improve performance in single-bout, high intensity events, probably due to an increase in buffering capacity, but its influence on single-bout swimming performance has not been investigated. The effects of sodium bicarbonate supplementation on 200 m freestyle swimming performance were investigated in elite male competitors. Following a randomised, double blind counterbalanced design, 9 swimmers completed maximal effort swims on 3 separate occasions: a control trial (C); after ingestion of sodium bicarbonate (SB: NaHCO3 300 mg . kg (-1) body mass); and after ingestion of a placebo (P: CaCO3 200 mg . kg (-1) body mass). The SB and P agents were packed in gelatine capsules and ingested 90 - 60 min prior to each 200 m swim. Mean 200 m performance times were significantly faster for SB than C or P (1 : 52.2 +/- 4.7; 1 : 53.7 +/- 3.8; 1 : 54.0 +/- 3.6 min : ss; p bicarbonate were all elevated pre-exercise in the SB compared to C and P trials (p < 0.05). Post-200 m blood lactate concentrations were significantly higher following the SB trial compared with P and C (p < 0.05). It was concluded that SB supplementation can improve 200 m freestyle performance time in elite male competitors, most likely by increasing buffering capacity.

Experience measuring performance improvement in multiphase picture archiving and communications systems implementations.

Science.gov (United States)

Reed, G; Reed, D H

1999-05-01

When planning a picture archiving and communications system (PACS) implementation and determining which equipment will be implemented in earlier and later phases, collection and analysis of selected data will aid in setting implementation priorities. If baseline data are acquired relative to performance objectives, the same information used for implementation planning can be used to measure performance improvement and outcomes. The main categories of data to choose from are: (1) financial data; (2) productivity data; (3) operational parameters; (4) clinical data; and (5) information about customer satisfaction. In the authors' experience, detailed workflow data have not proved valuable in measuring PACS performance and outcomes. Reviewing only one category of data in planning will not provide adequate basis for targeting operational improvements that will lead to the most significant gains. Quality improvement takes into account all factors in production: human capacity, materials, operating capital and assets. Once we have identified key areas of focus for quality improvement in each phase, we can translate objectives into implementation requirements and finally into detailed functional and performance requirements. Here, Integration Resources reports its experience measuring PACS performance relative to phased implementation strategies for three large medical centers. Each medical center had its own objectives for overcoming image management, physical/geographical, and functional/technical barriers. The report outlines (1) principal financial and nonfinancial measures used as performance indicators; (2) implementation strategies chosen by each of the three medical centers; and (3) the results of those strategies as compared with baseline data.

CFD Parametric Studies for Global Performance Improvement of Open Refrigerated Display Cabinets

Directory of Open Access Journals (Sweden)

Pedro Dinis Gaspar

2012-01-01

Full Text Available A detailed CFD modelling of an open refrigerated display cabinet has been formulated in a previous study. Some modifications are introduced in order to perform parametric studies dealing with low-cost geometrical and functional characteristics for improvement of the global performance and energy efficiency. The parametric studies are devoted to the analysis of the thermal response and behaviour inside the food conservation space influenced by (1 air flow rate through the evaporator heat exchanger; (2 air curtain behaviour; (3 hole dimensions and distribution of the back panel; (4 discharge and return grilles angles; and (5 flow deflectors inside the internal duct. The analysis of the numerical predictions from the parametric studies allows the development of an optimized model for the conception of an open refrigerated display cabinet with a more adequate configuration. The numerical predictions of the optimized model show lower product temperature and reduced electrical energy consumption, allowing the improvement of the food safety and the energy rationalization of the refrigeration equipment.

Measuring performance improvement: total organizational commitment or clinical specialization.

Science.gov (United States)

Caron, Aleece; Jones, Paul; Neuhauser, Duncan; Aron, David C

2004-01-01

Resources for hospitals are limited when they are faced with multiple publicly reported performance measures as tools to assess quality. The leadership in these organizations may choose to focus on 1 or 2 of these outcomes. An alternative approach is that the leadership may commit resources or create conditions that result in improved quality over a broad range of measures. We used aggregated data on mortality, length of stay, and obstetrical outcomes from Greater Cleveland Health Quality Choice data to test these theories. We used Pearson correlation analysis to determine of outcomes were correlated with one another. We used repeated-measures ANOVA to determine if an association existed between outcome and time and outcome and hospital. All of the outcomes across all hospitals demonstrate a trend of overall improvement. Both the Pearson and ANOVA result support the hypothesis for the organization-wide approach to quality improvement. Hospital that make improvements in one clinical area trend to make improvements in others. Hospitals that produce improvements in limited clinical or administrative areas may not have completely adopted CQI into their culture or may not have yet realized the benefits of their organizational commitments, but use some of the concepts to improve quality outcomes.

Performance improvements of binary diffractive structures via optimization of the photolithography and dry etch processes

Science.gov (United States)

Welch, Kevin; Leonard, Jerry; Jones, Richard D.

2010-08-01

Increasingly stringent requirements on the performance of diffractive optical elements (DOEs) used in wafer scanner illumination systems are driving continuous improvements in their associated manufacturing processes. Specifically, these processes are designed to improve the output pattern uniformity of off-axis illumination systems to minimize degradation in the ultimate imaging performance of a lithographic tool. In this paper, we discuss performance improvements in both photolithographic patterning and RIE etching of fused silica diffractive optical structures. In summary, optimized photolithographic processes were developed to increase critical dimension uniformity and featuresize linearity across the substrate. The photoresist film thickness was also optimized for integration with an improved etch process. This etch process was itself optimized for pattern transfer fidelity, sidewall profile (wall angle, trench bottom flatness), and across-wafer etch depth uniformity. Improvements observed with these processes on idealized test structures (for ease of analysis) led to their implementation in product flows, with comparable increases in performance and yield on customer designs.

Do Leadership Changes Improve Electoral Performance?

NARCIS (Netherlands)

Helboe Pedersen, H.; Schumacher, G.; Cross, W.; Pilet, J.-B.

2015-01-01

Does changing the leader improve a party’s electoral performance? And does it matter who for electoral performance who selects the leader? We hypothesize that in parties with inclusive selectorates leadership change is beneficial because the competition for the leadership is more open, receives more

Probabilistic Analysis of Gas Turbine Field Performance

Science.gov (United States)

Gorla, Rama S. R.; Pai, Shantaram S.; Rusick, Jeffrey J.

2002-01-01

A gas turbine thermodynamic cycle was computationally simulated and probabilistically evaluated in view of the several uncertainties in the performance parameters, which are indices of gas turbine health. Cumulative distribution functions and sensitivity factors were computed for the overall thermal efficiency and net specific power output due to the thermodynamic random variables. These results can be used to quickly identify the most critical design variables in order to optimize the design, enhance performance, increase system availability and make it cost effective. The analysis leads to the selection of the appropriate measurements to be used in the gas turbine health determination and to the identification of both the most critical measurements and parameters. Probabilistic analysis aims at unifying and improving the control and health monitoring of gas turbine aero-engines by increasing the quality and quantity of information available about the engine's health and performance.

Bitumen nanocomposites with improved performance

KAUST Repository

Kosma, Vasiliki

2017-11-29

Bitumen-clay nanocomposite binders with styrene-butadienestyrene triblock copolymer, SBS, and combinations of SBS and crumb rubber (CR) with different CR/SBS ratios have been synthesized and characterized. In addition to the binder, samples containing the binder and concrete sand (with a weight ratio 1:9) were prepared. The modified binders were studied in terms of filler dispersion, storage stability, mechanical performance and water susceptibility. We demonstrate that the samples containing nanoclays consistently outperform those based only on the polymer additives. We also find that nanocomposite samples based on a combination of SBS and CR are best, since in addition to other improvements they show excellent storage stability. Our work shows that substituting CR with SBS as a bitumen additive and combining it with inexpensive nanoclays leads to new materials with enhanced performance and improved stability for practical asphalt applications.

Improvement on reaction model for sodium-water reaction jet code and application analysis

International Nuclear Information System (INIS)

Itooka, Satoshi; Saito, Yoshinori; Okabe, Ayao; Fujimata, Kazuhiro; Murata, Shuuichi

2000-03-01

In selecting the reasonable DBL on steam generator (SG), it is necessary to improve analytical method for estimating the sodium temperature on failure propagation due to overheating. Improvement on sodium-water reaction (SWR) jet code (LEAP-JET ver.1.30) and application analysis to the water injection tests for confirmation of code propriety were performed. On the improvement of the code, a gas-liquid interface area density model was introduced to develop a chemical reaction model with a little dependence on calculation mesh size. The test calculation using the improved code (LEAP-JET ver.1.40) were carried out with conditions of the SWAT-3·Run-19 test and an actual scale SG. It is confirmed that the SWR jet behavior on the results and the influence to analysis result of a model are reasonable. For the application analysis to the water injection tests, water injection behavior and SWR jet behavior analyses on the new SWAT-1 (SWAT-1R) and SWAT-3 (SWAT-3R) tests were performed using the LEAP-BLOW code and the LEAP-JET code. In the application analysis of the LEAP-BLOW code, parameter survey study was performed. As the results, the condition of the injection nozzle diameter needed to simulate the water leak rate was confirmed. In the application analysis of the LEAP-JET code, temperature behavior of the SWR jet was investigated. (author)

Induction Machine with Improved Operating Performances for Electric Trucks. A FEM-Based Analysis

Directory of Open Access Journals (Sweden)

MUNTEANU, A.

2010-05-01

Full Text Available The paper presents a study concerning the performance developed by induction motors destined for motorization of heavy electric vehicles such as trucks. Taking into consideration the imposed restrictions, one presents, in a comparative manner, the main geometrical parameters which come of the classical design algorithms. A special attention is dedicated to the winding design, since it has to ensure two synchronous speeds corresponding to 16 and 8 poles, respectively. Moreover, the influence of the rotor slots shape for the improvement of the start-up is analyzed. Finally, a FEM-based study (approach based on finite element method is performed to put in view specific torque and slip values such as rated, start-up and pull-out ones.

Improving human performance: Industry factors influencing the ability to perform

OpenAIRE

Güera Massyn Romo

2013-01-01

Learning interventions and new technologies that aim to improve human performance must take cognisance of industry factors inhibiting human performance. The dynamic and fast pace nature of the Information and Communication Technologies (ICT) and the engineering industries do not lend themselves to proper skills planning and management. These industries experience real skills gaps, to some of which they contribute by themselves. This study reports on these performance-inhibiting factors such a...

JT8D and JT9D jet engine performance improvement program. Task 1: Feasibility analysis

Science.gov (United States)

Gaffin, W. O.; Webb, D. E.

1979-01-01

JT8D and JT9D component performance improvement concepts which have a high probability of incorporation into production engines were identified and ranked. An evaluation method based on airline payback period was developed for the purpose of identifying the most promising concepts. The method used available test data and analytical models along with conceptual/preliminary designs to predict the performance improvements, weight, installation characteristics, cost for new production and retrofit, maintenance cost, and qualitative characteristics of candidate concepts. These results were used to arrive at the concept payback period, which is the time required for an airline to recover the investment cost of concept implementation.

Continuing education for performance improvement: a creative approach.

Science.gov (United States)

Collins, Patti-Ann; Hardesty, Ilana; White, Julie L; Zisblatt, Lara

2012-10-01

In an effort to improve patient safety and health care outcomes, continuing medical education has begun to focus on performance improvement initiatives for physician practices. Boston University School of Medicine's (BUSM) Continuing Nursing Education Accredited Provider Unit has begun a creative project to award nursing contact hours for nurses' participation in performance improvement activities. This column highlights its initial efforts. Copyright 2012, SLACK Incorporated.

Low-Complexity Interference-Free Downlink Channel Assignment with Improved Performance in Coordinated Small Cells

KAUST Repository

Radaydeh, Redha M.

2015-05-01

This paper proposes a low-complexity interference-free channel assignment scheme with improved desired downlink performance in coordinated multi-antenna small-coverage access points (APs) that employ the open-access control strategy. The adopted system treats the case when each user can be granted an access to one of the available channels at a time. Moreover, each receive terminal can suppress a limited number of resolvable interfering sources via its highly-correlated receive array. On the other hand, the operation of the deployed APs can be coordinated to serve active users, and the availability of multiple physical channels and the use of uncorrelated transmit antennas at each AP are exploited to improve the performance of supported users. The analysis provides new approaches to use the transmit antenna array at each AP, the multiple physical channels, the receive antenna array at each user in order to identify interference-free channels per each user, and then to select a downlink channel that provides the best possible improved performance. The event of concurrent interference-free channel identification by different users is also treated to further improve the desired link associated with the scheduled user. The analysis considers the practical scenario of imperfect identification of interference-free channel by an active user and/or the imperfectness in scheduling concurrent users requests on the same channel. The developed formulations can be used to study any performance metric and they are applicable for any statistical and geometric channel models. © 2015 IEEE.

On improving the performance of nonphotochemical quenching in CP29 light-harvesting antenna complex

Science.gov (United States)

Berman, Gennady P.; Nesterov, Alexander I.; Sayre, Richard T.; Still, Susanne

2016-03-01

We model and simulate the performance of charge-transfer in nonphotochemical quenching (NPQ) in the CP29 light-harvesting antenna-complex associated with photosystem II (PSII). The model consists of five discrete excitonic energy states and two sinks, responsible for the potentially damaging processes and charge-transfer channels, respectively. We demonstrate that by varying (i) the parameters of the chlorophyll-based dimer, (ii) the resonant properties of the protein-solvent environment interaction, and (iii) the energy transfer rates to the sinks, one can significantly improve the performance of the NPQ. Our analysis suggests strategies for improving the performance of the NPQ in response to environmental changes, and may stimulate experimental verification.

Visuospatial training improves elementary students' mathematics performance.

Science.gov (United States)

Lowrie, Tom; Logan, Tracy; Ramful, Ajay

2017-06-01

Although spatial ability and mathematics performance are highly correlated, there is scant research on the extent to which spatial ability training can improve mathematics performance. This study evaluated the efficacy of a visuospatial intervention programme within classrooms to determine the effect on students' (1) spatial reasoning and (2) mathematics performance as a result of the intervention. The study involved grade six students (ages 10-12) in eight classes. There were five intervention classes (n = 120) and three non-intervention control classes (n = 66). A specifically designed 10-week spatial reasoning programme was developed collaboratively with the participating teachers, with the intervention replacing the standard mathematics curriculum. The five classroom teachers in the intervention programme presented 20 hr of activities aimed at enhancing students' spatial visualization, mental rotation, and spatial orientation skills. The spatial reasoning programme led to improvements in both spatial ability and mathematics performance relative to the control group who received standard mathematics instruction. Our study is the first to show that a classroom-based spatial reasoning intervention improves elementary school students' mathematics performance. © 2017 The British Psychological Society.

Improving perioperative performance: the use of operations management and the electronic health record.

Science.gov (United States)

Foglia, Robert P; Alder, Adam C; Ruiz, Gardito

2013-01-01

Perioperative services require the orchestration of multiple staff, space and equipment. Our aim was to identify whether the implementation of operations management and an electronic health record (EHR) improved perioperative performance. We compared 2006, pre operations management and EHR implementation, to 2010, post implementation. Operations management consisted of: communication to staff of perioperative vision and metrics, obtaining credible data and analysis, and the implementation of performance improvement processes. The EHR allows: identification of delays and the accountable service or person, collection and collation of data for analysis in multiple venues, including operational, financial, and quality. Metrics assessed included: operative cases, first case on time starts; reason for delay, and operating revenue. In 2006, 19,148 operations were performed (13,545 in the Main Operating Room (OR) area, and 5603, at satellite locations); first case on time starts were 12%; reasons for first case delay were not identifiable; and operating revenue was $115.8M overall, with $78.1M in the Main OR area. In 2010, cases increased to 25,856 (+35%); Main OR area increased to 13,986 (+3%); first case on time starts improved to 46%; operations outside the Main OR area increased to 11,870 (112%); case delays were ascribed to nurses 7%, anesthesiologists 22%, surgeons 33%, and other (patient, hospital) 38%. Five surgeons (7%) accounted for 29% of surgical delays and 4 anesthesiologists (8%) for 45% of anesthesiology delays; operating revenue increased to $177.3M (+53%) overall, and in the Main OR area rose to $101.5M (+30%). The use of operations management and EHR resulted in improved processes, credible data, promptly sharing the metrics, and pinpointing individual provider performance. Implementation of these strategies allowed us to shift cases between facilities, reallocate OR blocks, increase first case on time starts four fold and operative cases by 35%, and

EDUCATIONAL POLICIES AND INITIATIVES FOR IMPROVED PERFORMANCE

Directory of Open Access Journals (Sweden)

Flavia, CAIA

2015-03-01

Full Text Available According to Gartner estimates, due to increased variety, speed and data volume, by 2015 there will be a global demand of 4.4 million professionals for real-time analysis of data from sources with different structures, but only one third of the demand will be met. The purpose of this research is to identify possible solutions for improved academic results in the IT domain, considering the time management policies, the content and the student motivations, as well as the business strategy tendencies. These proposals are targeted toward meeting the IT specialists demand. The research is composed of two parts: the first explores the Romanian IT labour market characteristics, while the second investigates the academic education policies that can help mitigate deficiencies and attain higher performance. The deficiencies are identified through a series of statistical research and analysis based on national level databases, adopting a quantitative approach. The policies proposed are supported by a flow model developed considering the students' activity, motivation, traits and results, measured and analysed quantitatively.

Improving performance of high risk organizations Spanish nuclear sector from the analysis of organizational culture factors

International Nuclear Information System (INIS)

La Salabarnada, E.; German, S.; Silla, I.; Navajas, J.

2012-01-01

This paper presents the research project funded by UNESA and conducted by the CISOT-CIEMAT that aims to contribute to improving the operating performance of the Spanish nuclear power plants. This paper aims to identify the factors and key organizational processes to improve efficiency, in order to advance knowledge about the influence of organizational culture on the safety of high reliability organizations.

Use of PSA Level 2 analysis for improving containment performance. Report of a technical committee meeting

International Nuclear Information System (INIS)

1998-03-01

In order to discuss and exchange experience on different aspects of methods associated with Level 2 PSA and its applications for improving containment performance, the IAEA held a Technical Committee meeting in Vienna in December 1996. The meeting, which was attended by 26 participants from 20 Member States, provided a broad forum for discussion. The meeting addressed the issues related to the actual performance of Level 2 PSA studies as well as the insights gained from applications to improve containment performance. Particular attention was given to studies and applications for WWER type reactors, for which Level 2 work is still in its early stages, and for channel type reactors where modelling of accident progression is complex and significantly different from vessel type light water reactors. This TECDOC contains the papers presented at the meeting and the results of extensive discussions which were held in specific working groups

Glucocorticoids improve high-intensity exercise performance in humans

DEFF Research Database (Denmark)

Casuso, Rafael A; Melskens, Lars; Bruhn, Thomas

2014-01-01

It was investigated whether oral dexamethasone (DEX) administration improves exercise performance by reducing the initial rate of muscle fatigue development during dynamic exercise.......It was investigated whether oral dexamethasone (DEX) administration improves exercise performance by reducing the initial rate of muscle fatigue development during dynamic exercise....

Peer Mentors Can Improve Academic Performance

Science.gov (United States)

Asgari, Shaki; Carter, Frederick, Jr.

2016-01-01

The present study examined the relationship between peer mentoring and academic performance. Students from two introductory psychology classes either received (n = 37) or did not receive (n = 36) peer mentoring. The data indicated a consistent improvement in the performance (i.e., grades on scheduled exams) of the mentored group. A similar pattern…

A Knowledge-based Environment for Software Process Performance Analysis

Directory of Open Access Journals (Sweden)

Natália Chaves Lessa Schots

2015-08-01

Full Text Available Background: Process performance analysis is a key step for implementing continuous improvement in software organizations. However, the knowledge to execute such analysis is not trivial and the person responsible to executing it must be provided with appropriate support. Aim: This paper presents a knowledge-based environment, named SPEAKER, proposed for supporting software organizations during the execution of process performance analysis. SPEAKER comprises a body of knowledge and a set of activities and tasks for software process performance analysis along with supporting tools to executing these activities and tasks. Method: We conducted an informal literature reviews and a systematic mapping study, which provided basic requirements for the proposed environment. We implemented the SPEAKER environment integrating supporting tools for the execution of activities and tasks of performance analysis and the knowledge necessary to execute them, in order to meet the variability presented by the characteristics of these activities. Results: In this paper, we describe each SPEAKER module and the individual evaluations of these modules, and also present an example of use comprising how the environment can guide the user through a specific performance analysis activity. Conclusion: Although we only conducted individual evaluations of SPEAKER’s modules, the example of use indicates the feasibility of the proposed environment. Therefore, the environment as a whole will be further evaluated to verify if it attains its goal of assisting in the execution of process performance analysis by non-specialist people.

Improving Process Heating System Performance v3

Energy Technology Data Exchange (ETDEWEB)

None

2016-04-11

Improving Process Heating System Performance: A Sourcebook for Industry is a development of the U.S. Department of Energy (DOE) Advanced Manufacturing Office (AMO) and the Industrial Heating Equipment Association (IHEA). The AMO and IHEA undertook this project as part of an series of sourcebook publications developed by AMO on energy-consuming industrial systems, and opportunities to improve performance. Other topics in this series include compressed air systems, pumping systems, fan systems, steam systems, and motors and drives

Partnering through Training and Practice to Achieve Performance Improvement

Science.gov (United States)

Lyons, Paul R.

2010-01-01

This article presents a partnership effort among managers, trainers, and employees to spring to life performance improvement using the performance templates (P-T) approach. P-T represents a process model as well as a method of training leading to performance improvement. Not only does it add to our repertoire of training and performance management…

Does Corporate Social Responsibility Improve Financial Performance of Nigerian Firms? Empirical Evidence from Triangulation Analysis

Directory of Open Access Journals (Sweden)

Fasanya Olaleke Ismail

2013-04-01

Full Text Available This paper examines the impact of Corporate Social Responsibility (CSR on Financial Performance of Firms in Nigeria. This study utilizes primary data that were obtained through the use of structured questionnaires. The questions were structured in such a way as to gather pertinent and specific information on how effective Corporate Social Responsibility (CSR has improved the financial viability of firms in Nigeria. This paper employs both descriptive and quantitative techniques in which chi-square technique was used to test the significance relationship among the frequencies. The study reveals that proper and effective CSR goes a long way in improving the trend of firms’ financial performance in Nigeria using Cadbury Nigeria Plc. as the study area. It was observed that CSR could be a key instrument to the financial development of any organizations through the process of giving back to the community.

Clinical performance improvement series. Classic CQI integrated with comprehensive disease management as a model for performance improvement.

Science.gov (United States)

Joshi, M S; Bernard, D B

1999-08-01

In recent years, health and disease management has emerged as an effective means of delivering, integrating, and improving care through a population-based approach. Since 1997 the University of Pennsylvania Health System (UPHS) has utilized the key principles and components of continuous quality improvement (CQI) and disease management to form a model for health care improvement that focuses on designing best practices, using best practices to influence clinical decision making, changing processes and systems to deploy and deliver best practices, and measuring outcomes to improve the process. Experience with 28 programs and more than 14,000 patients indicates significant improvement in outcomes, including high physician satisfaction, increased patient satisfaction, reduced costs, and improved clinical process and outcome measures across multiple diseases. DIABETES DISEASE MANAGEMENT: In three months a UPHS multidisciplinary diabetes disease management team developed a best practice approach for the treatment of all patients with diabetes in the UPHS. After the program was pilot tested in three primary care physician sites, it was then introduced progressively to additional practice sites throughout the health system. The establishment of the role of the diabetes nurse care managers (certified diabetes educators) was central to successful program deployment. Office-based coordinators ensure incorporation of the best practice protocols into routine flow processes. A disease management intranet disseminates programs electronically. Outcomes of the UPHS health and disease management programs so far demonstrate success across multiple dimensions of performance-service, clinical quality, access, and value. The task of health care leadership today is to remove barriers and enable effective implementation of key strategies, such as health and disease management. Substantial effort and resources must be dedicated to gain physician buy-in and achieve compliance. The

Evaluation of new control rooms by operator performance analysis

International Nuclear Information System (INIS)

Mori, M; Tomizawa, T.; Tai, I.; Monta, K.; Yoshimura, S.; Hattori, Y.

1987-01-01

An advanced supervisory and control system called PODIA TM (Plant Operation by Displayed Information and Automation) was developed by Toshiba. Since this system utilizes computer driven CRTs as a main device for information transfer to operators, thorough system integration tests were performed at the factory and evaluations were made of operators' assessment from the initial experience of the system. The PODIA system is currently installed at two BWR power plants. Based on the experiences from the development of PODIA, a more advanced man-machine interface, Advanced-PODIA (A-PODIA), is developed. A-PODIA enhances the capabilities of PODIA in automation, diagnosis, operational guidance and information display. A-PODIA has been validated by carrying out systematic experiments with a full-scope simulator developed for the validation. The results of the experiments have been analyzed by the method of operator performance analysis and applied to further improvement of the A-PODIA system. As a feedback from actual operational experience, operator performance data in simulator training is an important source of information to evaluate human factors of a control room. To facilitate analysis of operator performance, a performance evaluation system has been developed by applying AI techniques. The knowledge contained in the performance evaluation system was elicited from operator training experts and represented as rules. The rules were implemented by employing an object-oriented paradigm to facilitate knowledge management. In conclusion, it is stated that the feedback from new control room operation can be obtained at an early stage by validation tests and also continuously by comprehensive evaluation (with the help of automated tools) of operator performance in simulator training. The results of operator performance analysis can be utilized for improvement of system design as well as operator training. (author)

Performance improvement integration: a whole systems approach.

Science.gov (United States)

Page, C K

1999-02-01

Performance improvement integration in health care organizations is a challenge for health care leaders. Required for accreditation by the Joint Commission on Accreditation of Healthcare Organizations (Joint Commission), performance improvement (PI) can be designed as a sustainable model for performance to survive in a turbulent period. Central Baptist Hospital developed a model for PI that focused on strategy established by the leadership team, delineated responsibility through the organizational structure of shared governance, and accountability for outcomes evidenced through the organization's profitability. Such an approach integrated into the culture of the organization can produce positive financial margins, positive customer satisfaction, and commendations from the Joint Commission.

Organizational learning and continuous quality improvement: examining the impact on nursing home performance.

Science.gov (United States)

Rondeau, Kent V; Wagar, Terry H

2002-01-01

Interest is growing in learning more about the ability of total quality management and continuous quality improvement (TQM/CQI) initiatives to contribute to the performance of healthcare organizations. A major factor in the successful implementation of TQM/CQI is the seminal contribution of an organization's culture. Many implementation efforts have not succeeded because of a corporate culture that failed to stress broader organizational learning. This may help to explain why some TQM/CQI programs have been unsuccessful in improving healthcare organization performance. Organizational performance variables and organizational learning orientation were assessed in a sample of 181 Canadian long-term care organizations that had implemented a formal TQM/CQI program. Categorical regression analysis shows that, in the absence of a strong corporAte culture that stresses organizational learning and employee development, few performance enhancements are reported. The results of the assessment suggest that a TQM/CQI program without the backing of a strong organizational learning culture may be insufficient to achieve augmented organizational performance.

Improvement potential of a real geothermal power plant using advanced exergy analysis

International Nuclear Information System (INIS)

Gökgedik, Harun; Yürüsoy, Muhammet; Keçebaş, Ali

2016-01-01

The main purpose of this paper is to quantitatively evaluate thermodynamic performance of a geothermal power plant (GPP) from potential for improvement point of view. Thus, sources of inefficiency and irreversibilities can be determined through exergy analysis. The advanced exergy analysis is more appropriate to determine real potential for thermodynamic improvements of the system by splitting exergy destruction into unavoidable and avoidable portions. The performance critical components and the potential for exergy efficiency improvement of a GPP were determined by means of the advanced exergy analysis. This plant is the Bereket GPP in Denizli/Turkey as a current operating system. The results show that the avoidable portion of exergy destruction in all components except for the turbines is higher than the unavoidable value. Therefore, much can be made to lessen the irreversibilities for components of the Bereket GPP. The total exergy efficiency of the system is found to be 9.60%. Its efficiency can be increased up to 15.40% by making improvements in the overall components. Although the heat exchangers had lower exergy and modified exergy efficiencies, their exergy improvement potentials were high. Finally, in the plant, the old technology is believed to be one of the main reasons for low efficiencies. - Highlights: • Evaluation of potential for improvement of a GPP using advanced exergy analysis. • Efficiency can be increased up to 15.40% by making improvements in the components. • Heat exchangers are the highest avoidable values, making them the least efficient components in plant. • The main reasons for low efficiencies are believed to be the old technology.

Suggested improvements to the definitions of Standardized Plant Analysis of Risk-Human Reliability Analysis (SPAR-H) performance shaping factors, their levels and multipliers and the nominal tasks

International Nuclear Information System (INIS)

Laumann, Karin; Rasmussen, Martin

2016-01-01

This paper discusses the definitions and content of eight performance shaping factors (PSFs) used in Standardized Plant Analysis of Risk-Human Reliability Analysis (SPAR-H) and their levels and multipliers. Definitions of nominal tasks are also discussed. The discussion is based on a review of literature on PSFs, interviews with consultants who have carried out SPAR-H analysis in the petroleum industry and an evaluation of human reliability analysis reports based on SPAR-H analysis. We concluded that SPAR-H definitions and descriptions of the PSFs are unclear and overlap too much, making it difficult for the analyst to choose between them and select the appropriate level. This reduces inter-rater reliability and thus the consistency of SPAR-H analyses. New definitions of the PSFs, levels and multipliers are suggested with the aim to develop more specific definitions of the PSFs in order to increase the inter-rater reliability of SPAR-H. Another aim was to construct more varied and more nuanced levels and multipliers to improve the capacity of SPAR-H analysis to capture the degree of difficulty faced by operators in different scenarios. We also suggest that only one of two nominal SPAR-H tasks should be retained owing to the difficulty in distinguishing between them. - Highlights: • The SPAR-H guidelines should be revised. • Descriptions of the PSFs should be improved. • New definitions should reduce overlap between the PSFs. • The multipliers are based on an “old” method and should be revised. • Some PSF levels and multipliers in SPAR-H are not logical.

Improving chemistry performance in CANDU plants

International Nuclear Information System (INIS)

Turner, C.; Guzonas, D.

2010-01-01

There is a strong interplay between coolant chemistry and materials selection in any nuclear power plant system. To achieve the design life of reactor components it is necessary to monitor and control relevant chemistry parameters, such as ionic conductivity, pH, concentrations of dissolved ions and redox species (e.g., hydrogen, hydrazine, oxygen) and the concentrations of suspended corrosion products. Chemistry specifications are set to achieve a balance between the sometimes conflicting requirements to minimize corrosion and radiological dose and to minimize operating and maintenance costs over the lifetime of the plant. For the past decade, Atomic Energy of Canada Limited (AECL) has taken a rigorous and disciplined approach to reviewing and updating all aspects of chemistry control in the CANDU® nuclear power plant (NPP). This approach has included proactively reviewing chemistry operating experience from existing CANDU® and other water-cooled NPPs worldwide to identify and address emerging issues, updating all of our chemistry control documentation to ensure that each chemistry parameter is linked to a specific requirement (e.g., reduce activity transport, monitor for condenser leak) and incorporating the latest results from our Research and Development (R and D) programs to ensure that all chemistry specifications are supported by a sound rationale. The results of this review and update have been incorporated into updated chemistry specifications and, in some cases, modified operating procedures for new and existing plants. In addition, recommendations have been made for design modifications to improve chemistry control in new build plants, especially during periods of shutdown and startup when chemistry control has traditionally been more challenging. Chemistry control in new-build CANDU® plants will rely increasingly on the use of on-line instrumentation interfaced directly to AECL's state-of-the-art chemistry monitoring, diagnostics and analysis

Managing Human Performance to Improve Nuclear Facility Operation

International Nuclear Information System (INIS)

2013-01-01

One of the IAEA's statutory objectives is to 'seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world.' One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property'. The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in Member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia, and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. IAEA Nuclear Energy Series No. NG-G-2.1, Managing Human Resources in the Field of Nuclear Energy, was published in 2009. In that publication, four interrelated objectives of the management of human resources were identified and discussed: ensuring that nuclear industry personnel have the necessary competence for their jobs; effectively organizing work activities; anticipating human resource needs; and monitoring and continually improving performance. This publication addresses the fourth objective and, in particular, summarizes good practices in the area of managing human performance

Performance improvement plan in customer technical services

International Nuclear Information System (INIS)

Lachambre, L.

1995-01-01

This presentation centred around the philosophy, goals, and initiatives associated with Gaz Metropolitain's performance improvement plan. Various aspects of the plan including customer surveys, new customer service policies, the creation of small working units, the decentralization of the Montreal service department, and customer-harmonized shift schedules were explored. Implementation of new service plans and contracts, the formation of improvement groups related to human resources, human resource and productivity management, leadership training, and the use of performance indicators were also explained

IMPROVING PERFORMANCES BY USING COST CONTROLLING IN THE MINING INDUSTRY ENTITIES

Directory of Open Access Journals (Sweden)

SORINEL CĂPUŞNEANU

2016-06-01

Full Text Available The aim of this article is to highlight the improving performances of entities from mining industry entities by using cost controlling as an important tool of management accounting, applying the target costing method. The survey is based on questions that led investigation made in the Romanian entities from mining industry and based on data a thorough analysis was done for fulfillment of authors’ purpose. The results obtained by applying the target costing method has allowed a very strict cost control, which ultimately led to increased performances of economic entities from mining industry in Romania. The secondary purpose of this article is to try adjusting the target costing method to the specific of entities in the mining industry. According to studies of specialists this method based on target costing calculation is rather unusual in this sector of mining industry and it relies heavily on the activity-based costing method. The article ends with the authors' conclusions on improving the performances of entities from mining industry based on cost controlling and use of mix information obtained through the applied methods

Training Attentional Control Improves Cognitive and Motor Task Performance.

Science.gov (United States)

Ducrocq, Emmanuel; Wilson, Mark; Vine, Sam; Derakshan, Nazanin

2016-10-01

Attentional control is a necessary function for the regulation of goal-directed behavior. In three experiments we investigated whether training inhibitory control using a visual search task could improve task-specific measures of attentional control and performance. In Experiment 1 results revealed that training elicited a near-transfer effect, improving performance on a cognitive (antisaccade) task assessing inhibitory control. In Experiment 2 an initial far-transfer effect of training was observed on an index of attentional control validated for tennis. The principal aim of Experiment 3 was to expand on these findings by assessing objective gaze measures of inhibitory control during the performance of a tennis task. Training improved inhibitory control and performance when pressure was elevated, confirming the mechanisms by which cognitive anxiety impacts performance. These results suggest that attentional control training can improve inhibition and reduce taskspecific distractibility with promise of transfer to more efficient sporting performance in competitive contexts.

An application of data mining in district heating substations for improving energy performance

Science.gov (United States)

Xue, Puning; Zhou, Zhigang; Chen, Xin; Liu, Jing

2017-11-01

Automatic meter reading system is capable of collecting and storing a huge number of district heating (DH) data. However, the data obtained are rarely fully utilized. Data mining is a promising technology to discover potential interesting knowledge from vast data. This paper applies data mining methods to analyse the massive data for improving energy performance of DH substation. The technical approach contains three steps: data selection, cluster analysis and association rule mining (ARM). Two-heating-season data of a substation are used for case study. Cluster analysis identifies six distinct heating patterns based on the primary heat of the substation. ARM reveals that secondary pressure difference and secondary flow rate have a strong correlation. Using the discovered rules, a fault occurring in remote flow meter installed at secondary network is detected accurately. The application demonstrates that data mining techniques can effectively extrapolate potential useful knowledge to better understand substation operation strategies and improve substation energy performance.

Improving the environmental performance of biofuels with industrial symbiosis

International Nuclear Information System (INIS)

Martin, Michael; Eklund, Mats

2011-01-01

In the production of biofuels for transport many critics have argued about the poor energy efficiency and environmental performance of the production industries. Optimism is thus set on the production of second generation biofuels, while first generation biofuels continue to dominate worldwide. Therefore it is interesting to consider how the environmental performance of first generation biofuel industries can be improved. The field of industrial symbiosis offers many possibilities for potential improvements in the biofuel industry and theories from this research field are used in this paper to highlight how environmental performance improvements can be accomplished. This comes in the form of by-product synergies and utility synergies which can improve material and energy handling. Furthermore, the processes and products can gain increased environmental performance improvements by the adaption of a renewable energy system which will act as a utility provider for many industries in a symbiotic network. By-products may thereafter be upcycled through biogas production processes to generate both energy and a bio-fertilizer. A case study of an actual biofuel industrial symbiosis is also reviewed to provide support for these theories. -- Highlights: → By-product and utility synergies may improve the production processes of biofuel industries for reduced energy consumption and improved environmental performance. → Upcycling tenants can make use of wastes to upgrade waste to a valuable product and/or energy source. → Energy systems for biofuel production have a large influence on the performance of biofuel industries.

Genre Analysis and Writing Skill: Improving Iranian EFL Learners Writing Performance through the Tenets of Genre Analysis

Directory of Open Access Journals (Sweden)

Nazanin Naderi Kalali

2015-12-01

Full Text Available The main thrust of this study was to determine whether a genre-based instruction improve the writing proficiency of Iranian EFL learners. To this end, 30 homogenous Iranian BA learners studying English at Islamic Azad University, Bandar Abbas Branch were selected as the participants of the study through a version of TOEFL test as the proficiency test. The selected participants were 15 females and 15 males who were randomly divided into two groups of experimental and control. The both experimental and control groups were asked to write on a topic determined by the researcher which were considered as the pre-test. The writing of the students were scored using holistic scoring procedure. The subjects received sixteen hours instruction—the experimental group using a genre-based pedagogy and the control group through the traditional methodology which was followed by a post-test—the subjects were, this time, asked to write on the same topic which they were asked to write before instruction. Their post-writings were also scored through the holistic scoring procedures. In analyzing the data, t-test statistic was utilized for comparing the performances of the two groups. It was found that there is statistically significant difference between the writing ability of the participants who go under a genre-based instruction and who don’t. The study, however, didn’t find any significant role for gender. Keywords: genre analysis, writing skill, holistic scoring procedure, pre-test, post-test, t-test

ANALYSIS FRAMEWORKS OF THE COLLABORATIVE INNOVATION PERFORMANCE

Directory of Open Access Journals (Sweden)

Dan SERGHIE

2014-12-01

Full Text Available Time management is one of the resources by which we can achieve improved performance innovation. This perspective of resource management and process efficiency by reducing the timing of incubation of ideas, selecting profitable innovations and turning them into added value relates to that absolute time, a time specific to human existence. In this article I will try to prove that the main way to obtain high performance through inter-organizational innovation can be achieved by manipulating the context and manipulating knowledge outside the arbitrary concept for “time”. This article presents the results of the research suggesting a sequential analysis and evaluation model of the performance through a rational and refined process of selection of the performance indicators, aiming at providing the shortest and most relevant list of criteria.

Performance trending, analysis, and reporting

International Nuclear Information System (INIS)

Thomas, J.A.; Forsyth, M.

1995-01-01

Improvements in power plant operations and maintenance have seen made possible through the use of improved software systems and communications capabilities provided by distributed computer systems and networks. Staff functions have been added at several operating units to improve performance. A new class of software system is also in use at South Texas Project and DC Cook. These staff activities are performed using the new software tool support and associated improvements in operations that have been produced

Evaluating health service quality: using importance performance analysis.

Science.gov (United States)

Izadi, Azar; Jahani, Younes; Rafiei, Sima; Masoud, Ali; Vali, Leila

2017-08-14

Purpose Measuring healthcare service quality provides an objective guide for managers and policy makers to improve their services and patient satisfaction. Consequently, the purpose of this paper is to measure service quality provided to surgical and medical inpatients at Kerman Medical Sciences University (KUMS) in 2015. Design/methodology/approach A descriptive-analytic study, using a cross-sectional method in the KUMS training hospitals, was implemented between October 2 and March 15, 2015. Using stratified random sampling, 268 patients were selected. Data were collected using an importance-performance analysis (IPA) questionnaire, which measures current performance and determines each item's importance from the patients' perspectives. These data indicate overall satisfaction and appropriate practical strategies for managers to plan accordingly. Findings Findings revealed a significant gap between service importance and performance. From the patients' viewpoint, tangibility was the highest priority (mean=3.54), while reliability was given the highest performance (mean=3.02). The least important and lowest performance level was social accountability (mean=1.91 and 1.98, respectively). Practical implications Healthcare managers should focus on patient viewpoints and apply patient comments to solve problems, improve service quality and patient satisfaction. Originality/value The authors applied an IPA questionnaire to measure service quality provided to surgical and medical ward patients. This method identifies and corrects service quality shortcomings and improving service recipient perceptions.

Techniques for Improving Spelling Performance.

Science.gov (United States)

Saylor, Paul

Improving spelling performance of college students is a question of insuring that the correct information is in long-term memory and readily retrievable. Any system of spelling instruction should recognize the capacity limits of the sensory register and short-term memory; provide for identification of and concentration on the distinctive features…

Efficacy of a Template Creation Approach for Performance Improvement

Science.gov (United States)

Lyons, Paul R.

2011-01-01

This article presents the training and performance improvement approach, performance templates (P-T), and provides empirical evidence to support the efficacy of P-T. This approach involves a partnership among managers, trainers, and employees in the creation, use, and improvement of guides to affect the performance of critical tasks in the…

42 CFR 460.132 - Quality assessment and performance improvement plan.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Quality assessment and performance improvement plan... assessment and performance improvement plan. (a) Basic rule. A PACE organization must have a written quality assessment and performance improvement plan. (b) Annual review. The PACE governing body must review the plan...

Integrating patient satisfaction into performance measurement to meet improvement challenges.

Science.gov (United States)

Smith, J E; Fisher, D L; Endorf-Olson, J J

2000-05-01

A Value Compass has been proposed to guide health care data collection. The "compass corners" represent the four types of data needed to meet health care customer expectations: appropriate clinical outcomes, improved functional status, patient satisfaction, and appropriate costs. Collection of all four types of data is necessary to select processes in need of improvement, guide improvement teams, and monitor the success of improvement efforts. INTEGRATED DATA AT BRYANLGH: BryanLGH Medical Center in Lincoln, Nebraska, has adopted multiple performance measurement systems to collect clinical outcome, financial, and patient satisfaction data into integrated databases. Data integration allows quality professionals at BryanLGH to identify quality issues from multiple perspectives and track the interrelated effects of improvement efforts. A CASE EXAMPLE: Data from the fourth quarter of 1997 indicated the need to improve processes related to cesarean section (C-section) deliveries. An interdisciplinary team was formed, which focused on educating nurses, physicians, and the community about labor support measures. Physicians were given their own rates of C-section deliveries. The C-section rate decreased from 27% to 19%, but per-case cost increased. PickerPLUS+ results indicated that BryanLGH obstetric patients reported fewer problems with receiving information than the Picker norm, but they reported more problems with the involvement of family members and friends. The data collected so far have indicated a decrease in the C-section rate and a need to continue to work on cost and psychosocial issues. A complete analysis of results was facilitated by integrated performance management systems. Successes have been easily tracked over time, and the need for further work on related processes has been clearly identified.

Does Education Reform Improve Job Performance

National Research Council Canada - National Science Library

Wenger, J

2003-01-01

.... Examining military personnel data, which is a highly detailed source of information for recent high school graduate's performance, we find that the quality of Navy recruits improved during the 1990...

Utilizing Lesson Study in Improving Year 12 Students' Learning and Performance in Mathematics

Directory of Open Access Journals (Sweden)

Jessie Siew Yin Chong

2017-02-01

Full Text Available This study investigated the use of Lesson Study to improve Year 12 students' performance in conditional probability through Inquiry-Based Learning (IBL lessons. In total, 66 students comprised of three Year 12 classes of similar abilities, and their three respective teachers from a government junior college participated in the study. The instruments used to collect the relevant data in this study were teachers' reflective journals and students' achievement tests. The collected data were then analyzed and interpreted quantitatively using the SPSS. The analysis of the students' pre- and post-tests concluded that as the lesson plans were gradually refined and enhanced, their performance in solving conditional probability questions steadily improved.

Improving Steam System Performance: A Sourcebook for Industry

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

The sourcebook is a reference for industrial steam system users, outlining opportunities to improve steam system performance. This Sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The Sourcebook is divided into the following three main sections: Section 1: Steam System Basics--For users unfamiliar with the basics of steam systems, or for users seeking a refresher, a brief discussion of the terms, relationships, and important system design considerations is provided. Users already familiar with industrial steam system operation may want to skip this section. This section describes steam systems using four basic parts: generation, distribution, end use, and recovery. Section 2: Performance Improvement Opportunities--This section discusses important factors that should be considered when industrial facilities seek to improve steam system performance and to lower operating costs. This section also provides an overview of the finance considerations related to steam system improvements. Additionally, this section discusses several resources and tools developed by the U. S. Department of Energy's (DOE) BestPractices Steam Program to identify and assess steam system improvement opportunities. Section 3: Programs, Contacts, and Resources--This section provides a directory of associations and other organizations involved in the steam system marketplace. This section also provides a description of the BestPractices Steam Program, a directory of contacts, and a listing of available resources and tools, such as publications, software, training courses, and videos.

Goals and experience of performance improvement

Energy Technology Data Exchange (ETDEWEB)

Tan, H. [CNNO, CNNP, Nuclear Power Operations Management Co., Ltd. (China)

2015-07-01

Performance improvement was achieved by reasonable arrangement of planned window for related work and optimization of time for important maintenance items, outage quality and duration. Unplanned output loss has been reduced through routine unit management and improvements to both personnel skill and equipment reliability. Planned power generation loss is reduced by controlling planned duration and quality of forced shutdowns and outages, to ensure safe and stable plant operation.

Anesthesia report card - a customizable tool for performance improvement.

Science.gov (United States)

Peccora, Christian D; Gimlich, Robert; Cornell, Richard P; Vacanti, Charles A; Ehrenfeld, Jesse M; Urman, Richard D

2014-09-01

Measuring and providing performance feedback to physicians has gained momentum not only as a way to comply with regulatory requirements, but also as a way to improve patient care. Measurement of structural, process, and outcome metrics in a reliable, evidence-based, specialty-specific manner maximizes the probability of improving physician performance. The manner in which feedback is provided influences whether the measurement tool will be successful in changing behavior. We created an innovative reporting tool template for anesthesiology practitioners designed to provide detailed, continuous feedback covering many aspects of clinical practice. The literature regarding quality metric measurement and feedback strategies was examined to design a reporting tool that could provide high quality information and result in improved performance of clinical and academic tasks. A committee of department leaders and information technology professionals was tasked with determining the measurement criteria and infrastructure needed to generate these reports. Data was collected in a systematic, unbiased manner, and reports were populated with information from multiple databases and software systems. Feedback would be based on frequently updated information and allow for analysis of historical performance as well as comparison amongst peers. A template for an anesthesia report card was created. Categories included compliance, credentialing and qualifications, education, clinical and operating room responsibilities, and academic achievements. Physicians were able to choose to be evaluated in some of the categories and had to meet a minimum number of criteria within each category. This allowed for customization to each practitioner's practice. Criteria were derived from the measures of academic and clinical proficiency, as well as quality metrics. Criteria were objective measures and data gathering was often automated. Reports could be generated that were updated daily and provided

Evaluating the Effect of Virtual Reality Temporal Bone Simulation on Mastoidectomy Performance: A Meta-analysis.

Science.gov (United States)

Lui, Justin T; Hoy, Monica Y

2017-06-01

Background The increasing prevalence of virtual reality simulation in temporal bone surgery warrants an investigation to assess training effectiveness. Objectives To determine if temporal bone simulator use improves mastoidectomy performance. Data Sources Ovid Medline, Embase, and PubMed databases were systematically searched per the PRISMA guidelines. Review Methods Inclusion criteria were peer-reviewed publications that utilized quantitative data of mastoidectomy performance following the use of a temporal bone simulator. The search was restricted to human studies published in English. Studies were excluded if they were in non-peer-reviewed format, were descriptive in nature, or failed to provide surgical performance outcomes. Meta-analysis calculations were then performed. Results A meta-analysis based on the random-effects model revealed an improvement in overall mastoidectomy performance following training on the temporal bone simulator. A standardized mean difference of 0.87 (95% CI, 0.38-1.35) was generated in the setting of a heterogeneous study population ( I 2 = 64.3%, P virtual reality simulation temporal bone surgery studies, meta-analysis calculations demonstrate an improvement in trainee mastoidectomy performance with virtual simulation training.

Performance measurement in transport sector analysis

Directory of Open Access Journals (Sweden)

M. Išoraitė

2004-06-01

. Alternatives analysis. The numerous courses of action could be taken to improve performance. However, due to limited resources choices have to be made. This requires prioritizing.

Improving Loop Dependence Analysis

DEFF Research Database (Denmark)

Jensen, Nicklas Bo; Karlsson, Sven

2017-01-01

Programmers can no longer depend on new processors to have significantly improved single-thread performance. Instead, gains have to come from other sources such as the compiler and its optimization passes. Advanced passes make use of information on the dependencies related to loops. We improve th...

Improving engineering performance by utilizing process indicators

International Nuclear Information System (INIS)

Roberts, T.E.

1992-01-01

The purpose of the work discussed in this paper was to develop engineering performance indicators used to facilitate improvement to the technical quality, cost-effectiveness, and delivery of engineering products and service. This work was specifically tailored for engineering support products and service associated with operating Florida Power and Light Company (FP and L) nuclear plants. The engineering process for the development of plant change packages was reviewed to identify critical in-process activities. Because each engineering project usually deals with a specific component or plant system, the different tasks are usually technically unique and of varying magnitudes. Although each engineering product may employ different analytical techniques or industry code requirements, several activities in documenting the engineering design process are generic. The quality of performance in these activities can be monitored analogously to the steps in a manufacturing process. This concept builds quality concepts into the package in lieu of inspecting package quality at the end of the process. The work has resulted in a valuable self-assessment tool that serves as a basis for engineering process improvements. The indicators are published in a semi-yearly performance report for FP and L contractors as well as FP and L in-house engineering work. Contracts have been set up to base fees on meeting targets established for the performance report. The ability to meet performance targets continues to improve

Impeller inlet geometry effect on performance improvement for centrifugal pumps

International Nuclear Information System (INIS)

Luo, Xianwu; Zhang, Yao; Peng, Junqi; Xu, Hongyuan; Yu, Weiping

2008-01-01

This research treats the effect of impeller inlet geometry on performance improvement for a boiler feed pump, who is a centrifugal pump having specific speed of 183 m.m 3 min -1 .min -1 and close type impeller with exit diameter of 450 mm. The hydraulic performance and cavitation performance of the pump have been tested experimentally. In order to improve the pump, five impellers have been considered by extending the blade leading edge or applying much larger blade angle at impeller inlet compared with the original impeller. The 3-D turbulent flow inside those pumps has been analyzed basing on RNG k-ε turbulence model and VOF cavitation model. It is noted that the numerical results are fairly good compared with the experiments. Based on the experimental test and numerical simulation, the following conclusions can be drawn: (1) Impeller inlet geometry has important influence on performance improvement in the case of centrifugal pump. Favorite effects on performance improvement have been achieved by both extending the blade leading edge and applying much larger blade angle at impeller inlet: (2) It is suspected that the extended leading edge have favorite effect for improving hydraulic performance, and the much larger blade angle at impeller inlet have favorite effect for improving cavitation performance for the test pump: (3) Uniform flow upstream of impeller inlet is helpful for improving cavitation performance of the pump

Performance Improvement of Inertial Navigation System by Using Magnetometer with Vehicle Dynamic Constraints

Directory of Open Access Journals (Sweden)

Daehee Won

2015-01-01

Full Text Available A navigation algorithm is proposed to increase the inertial navigation performance of a ground vehicle using magnetic measurements and dynamic constraints. The navigation solutions are estimated based on inertial measurements such as acceleration and angular velocity measurements. To improve the inertial navigation performance, a three-axis magnetometer is used to provide the heading angle, and nonholonomic constraints (NHCs are introduced to increase the correlation between the velocity and the attitude equation. The NHCs provide a velocity feedback to the attitude, which makes the navigation solution more robust. Additionally, an acceleration-based roll and pitch estimation is applied to decrease the drift when the acceleration is within certain boundaries. The magnetometer and NHCs are combined with an extended Kalman filter. An experimental test was conducted to verify the proposed method, and a comprehensive analysis of the performance in terms of the position, velocity, and attitude showed that the navigation performance could be improved by using the magnetometer and NHCs. Moreover, the proposed method could improve the estimation performance for the position, velocity, and attitude without any additional hardware except an inertial sensor and magnetometer. Therefore, this method would be effective for ground vehicles, indoor navigation, mobile robots, vehicle navigation in urban canyons, or navigation in any global navigation satellite system-denied environment.

Analysis of Employee Engagement to Improve the Performance of Retail Risk Group PT Bank Mandiri

Science.gov (United States)

Wiseto, Artody; Hubeis, Aida Vitayala; Sukandar, Dadang

2016-01-01

Nowadays, every company requires their employees have a bound sense to their company. It's called engagement. Also have that expectation, PT Bank Mandiri (Persero) Tbk, Bank with the largest assets in Indonesia. PT Bank Mandiri (Persero) Tbk expect which employee engagement can improve the performance such as financial, service, and production…

Sigma metric analysis for performance of creatinine with fresh frozen serum.

Science.gov (United States)

Kang, Fengfeng; Zhang, Chuanbao; Wang, Wei; Wang, Zhiguo

2016-01-01

Six sigma provides an objective and quantitative methodology to describe the laboratory testing performance. In this study, we conducted a national trueness verification scheme with fresh frozen serum (FFS) for serum creatinine to evaluate its performance in China. Two different concentration levels of FFS, targeted with reference method, were sent to 98 laboratories in China. Imprecision and bias of the measurement procedure were calculated for each participant to further evaluate the sigma value. Quality goal index (QGI) analysis was used to investigate the reason of unacceptable performance for laboratories with σ high concentration of creatinine had preferable sigma values. For the enzymatic method, 7.0% (5/71) to 45.1% (32/71) of the laboratories need to improve their measurement procedures (σ 1.2). Only 3.1-5.3% of the laboratories should improve both of the precision and trueness. Sigma metric analysis of the serum creatinine assays is disappointing, which was mainly due to the unacceptable analytical bias according to the QGI analysis. Further effort is needed to enhance the trueness of the creatinine measurement.

Improving the performance of minimizers and winnowing schemes.

Science.gov (United States)

Marçais, Guillaume; Pellow, David; Bork, Daniel; Orenstein, Yaron; Shamir, Ron; Kingsford, Carl

2017-07-15

The minimizers scheme is a method for selecting k -mers from sequences. It is used in many bioinformatics software tools to bin comparable sequences or to sample a sequence in a deterministic fashion at approximately regular intervals, in order to reduce memory consumption and processing time. Although very useful, the minimizers selection procedure has undesirable behaviors (e.g. too many k -mers are selected when processing certain sequences). Some of these problems were already known to the authors of the minimizers technique, and the natural lexicographic ordering of k -mers used by minimizers was recognized as their origin. Many software tools using minimizers employ ad hoc variations of the lexicographic order to alleviate those issues. We provide an in-depth analysis of the effect of k -mer ordering on the performance of the minimizers technique. By using small universal hitting sets (a recently defined concept), we show how to significantly improve the performance of minimizers and avoid some of its worse behaviors. Based on these results, we encourage bioinformatics software developers to use an ordering based on a universal hitting set or, if not possible, a randomized ordering, rather than the lexicographic order. This analysis also settles negatively a conjecture (by Schleimer et al. ) on the expected density of minimizers in a random sequence. The software used for this analysis is available on GitHub: https://github.com/gmarcais/minimizers.git . gmarcais@cs.cmu.edu or carlk@cs.cmu.edu. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Using semantic analysis to improve speech recognition performance

OpenAIRE

Erdoğan, Hakan; Erdogan, Hakan; Sarıkaya, Ruhi; Sarikaya, Ruhi; Chen, Stanley F.; Gao, Yuqing; Picheny, Michael

2005-01-01

Although syntactic structure has been used in recent work in language modeling, there has not been much effort in using semantic analysis for language models. In this study, we propose three new language modeling techniques that use semantic analysis for spoken dialog systems. We call these methods concept sequence modeling, two-level semantic-lexical modeling, and joint semantic-lexical modeling. These models combine lexical information with varying amounts of semantic information, using ann...

SPORTS ORGANIZATIONS MANAGEMENT IMPROVEMENT: A SURVEY ANALYSIS

Directory of Open Access Journals (Sweden)

Alin Molcut

2015-07-01

Full Text Available Sport organizations exist to perform tasks that can only be executed through cooperative effort, and sport management is responsible for the performance and success of these organizations. The main of the paper is to analyze several issues of management sports organizations in order to asses their quality management. In this respect a questionnaire has been desingned for performing a survey analysis through a statistical approach. Investigation was conducted over a period of 3 months, and have been questioned a number of managers and coaches of football, all while pursuing an activity in football clubs in the counties of Timis and Arad, the level of training for children and juniors. The results suggest that there is a significant interest for the improvement of management across teams of children and under 21 clubs, emphasis on players' participation and rewarding performance. Furthermore, we can state that in the sports clubs there is established a vision and a mission as well as the objectives of the club's general refers to both sporting performance, and financial performance.

A Cross-Platform Infrastructure for Scalable Runtime Application Performance Analysis

Energy Technology Data Exchange (ETDEWEB)

Jack Dongarra; Shirley Moore; Bart Miller, Jeffrey Hollingsworth; Tracy Rafferty

2005-03-15

The purpose of this project was to build an extensible cross-platform infrastructure to facilitate the development of accurate and portable performance analysis tools for current and future high performance computing (HPC) architectures. Major accomplishments include tools and techniques for multidimensional performance analysis, as well as improved support for dynamic performance monitoring of multithreaded and multiprocess applications. Previous performance tool development has been limited by the burden of having to re-write a platform-dependent low-level substrate for each architecture/operating system pair in order to obtain the necessary performance data from the system. Manual interpretation of performance data is not scalable for large-scale long-running applications. The infrastructure developed by this project provides a foundation for building portable and scalable performance analysis tools, with the end goal being to provide application developers with the information they need to analyze, understand, and tune the performance of terascale applications on HPC architectures. The backend portion of the infrastructure provides runtime instrumentation capability and access to hardware performance counters, with thread-safety for shared memory environments and a communication substrate to support instrumentation of multiprocess and distributed programs. Front end interfaces provides tool developers with a well-defined, platform-independent set of calls for requesting performance data. End-user tools have been developed that demonstrate runtime data collection, on-line and off-line analysis of performance data, and multidimensional performance analysis. The infrastructure is based on two underlying performance instrumentation technologies. These technologies are the PAPI cross-platform library interface to hardware performance counters and the cross-platform Dyninst library interface for runtime modification of executable images. The Paradyn and KOJAK

Improving co-running program’s performance on CMP

Directory of Open Access Journals (Sweden)

Tian Dawei

2017-01-01

Full Text Available Chip multi-processor (CMP has become the most common processor in the current cluster and desktop computer, and it is also the current development direction. On CMP, programs usually co-running with each other. However, programs commonly interfere with each other. Some time the interference takes big effect, which cause serious drop down of performance. In order to avoid the serious performance interference, programs should be scheduled reasonably to different socket to improve the program’s performance and system’s utilization. In this paper we propose a new scheduling method to realize a more reasonable scheduling. We do not only consider the LLC miss rate, but also consider the LLC reference of the programs. By the information of LLC reference and LLC miss rate, we schedule programs to different sockets, which realize a reasonable scheduling. The experiment result show that making use of the scheduling method proposed by our paper, program’s performance can improve 4%, because the performance improve is realized by on-chip resource, which is a big contribution.

Virtual airway simulation to improve dexterity among novices performing fibreoptic intubation.

Science.gov (United States)

De Oliveira, G S; Glassenberg, R; Chang, R; Fitzgerald, P; McCarthy, R J

2013-10-01

We developed a virtual reality software application (iLarynx) using built-in accelerometer properties of the iPhone(®) or iPad(®) (Apple Inc., Cupertino, CA, USA) that mimics hand movements for the performance of fibreoptic skills. Twenty novice medical students were randomly assigned to virtual airway training with the iLarynx software or no additional training. Eight out of the 10 subjects in the standard training group had at least one failed (> 120 s) attempt compared with two out of the 10 participants in the iLarynx group (p = 0.01). There were a total of 24 failed attempts in the standard training group and four in the iLarynx group (p < 0.005). Cusum analysis demonstrated continued group improvement in the iLarynx, but not in the standard training group. Virtual airway simulation using freely available software on a smartphone/tablet device improves dexterity among novices performing upper airway endoscopy. © 2013 The Association of Anaesthetists of Great Britain and Ireland.

Analysis approach of turnout crossing performance by field measurements and finite element modeling

NARCIS (Netherlands)

Xin, L.; Markine, V.L.; Shevtsov, I.

2015-01-01

The procedure for analyzing turnout crossing performance is developed in this paper. The experimental and numerical analysis are both conducted to evaluate the dynamic behavior of the crossing and to further improve the crossing performance. Geometry and acceleration measurements are performed on

Diversity Performance Analysis on Multiple HAP Networks

Science.gov (United States)

Dong, Feihong; Li, Min; Gong, Xiangwu; Li, Hongjun; Gao, Fengyue

2015-01-01

One of the main design challenges in wireless sensor networks (WSNs) is achieving a high-data-rate transmission for individual sensor devices. The high altitude platform (HAP) is an important communication relay platform for WSNs and next-generation wireless networks. Multiple-input multiple-output (MIMO) techniques provide the diversity and multiplexing gain, which can improve the network performance effectively. In this paper, a virtual MIMO (V-MIMO) model is proposed by networking multiple HAPs with the concept of multiple assets in view (MAV). In a shadowed Rician fading channel, the diversity performance is investigated. The probability density function (PDF) and cumulative distribution function (CDF) of the received signal-to-noise ratio (SNR) are derived. In addition, the average symbol error rate (ASER) with BPSK and QPSK is given for the V-MIMO model. The system capacity is studied for both perfect channel state information (CSI) and unknown CSI individually. The ergodic capacity with various SNR and Rician factors for different network configurations is also analyzed. The simulation results validate the effectiveness of the performance analysis. It is shown that the performance of the HAPs network in WSNs can be significantly improved by utilizing the MAV to achieve overlapping coverage, with the help of the V-MIMO techniques. PMID:26134102

Diversity Performance Analysis on Multiple HAP Networks

Directory of Open Access Journals (Sweden)

Feihong Dong

2015-06-01

Full Text Available One of the main design challenges in wireless sensor networks (WSNs is achieving a high-data-rate transmission for individual sensor devices. The high altitude platform (HAP is an important communication relay platform for WSNs and next-generation wireless networks. Multiple-input multiple-output (MIMO techniques provide the diversity and multiplexing gain, which can improve the network performance effectively. In this paper, a virtual MIMO (V-MIMO model is proposed by networking multiple HAPs with the concept of multiple assets in view (MAV. In a shadowed Rician fading channel, the diversity performance is investigated. The probability density function (PDF and cumulative distribution function (CDF of the received signal-to-noise ratio (SNR are derived. In addition, the average symbol error rate (ASER with BPSK and QPSK is given for the V-MIMO model. The system capacity is studied for both perfect channel state information (CSI and unknown CSI individually. The ergodic capacity with various SNR and Rician factors for different network configurations is also analyzed. The simulation results validate the effectiveness of the performance analysis. It is shown that the performance of the HAPs network in WSNs can be significantly improved by utilizing the MAV to achieve overlapping coverage, with the help of the V-MIMO techniques.

A study on improving the performance of a research reactor's equilibrium core

Directory of Open Access Journals (Sweden)

Muhammad Atta

2013-01-01

Full Text Available Utilizing low enriched uranium silicide fuel (U3Si2-Al of existing uranium density (3.285 g/cm3, different core configurations have been studied in search of an equilibrium core with an improved performance for the Pakistan Research Reactor-1. Furthermore, we have extended our analysis to the performance of higher density silicide fuels with a uranium density of 4.0 and 4.8 U g/cm3. The criterion used in selecting the best performing core was that of “unit flux time cycle length per 235U mass per cycle”. In order to analyze core performance by improving neutron moderation, utilizing higher-density fuel, the effect of the coolant channel width was also studied by reducing the number of plates in the standard/control fuel element. Calculations employing computer codes WIMSD/4 and CITATION were performed. A ten energy group structure for fission neutrons was used for the generation of microscopic cross-sections through WIMSD/4. To search the equilibrium core, two-dimensional core modelling was performed in CITATION. Performance indicators have shown that the higher-density uranium silicide-fuelled core (U density 4.8 g/cm3 without any changes in standard/control fuel elements, comprising of 15 standard and 4 control fuel elements, is the best performing of all analyzed cores.

Perceptual learning improves visual performance in juvenile amblyopia.

Science.gov (United States)

Li, Roger W; Young, Karen G; Hoenig, Pia; Levi, Dennis M

2005-09-01

To determine whether practicing a position-discrimination task improves visual performance in children with amblyopia and to determine the mechanism(s) of improvement. Five children (age range, 7-10 years) with amblyopia practiced a positional acuity task in which they had to judge which of three pairs of lines was misaligned. Positional noise was produced by distributing the individual patches of each line segment according to a Gaussian probability function. Observers were trained at three noise levels (including 0), with each observer performing between 3000 and 4000 responses in 7 to 10 sessions. Trial-by-trial feedback was provided. Four of the five observers showed significant improvement in positional acuity. In those four observers, on average, positional acuity with no noise improved by approximately 32% and with high noise by approximately 26%. A position-averaging model was used to parse the improvement into an increase in efficiency or a decrease in equivalent input noise. Two observers showed increased efficiency (51% and 117% improvements) with no significant change in equivalent input noise across sessions. The other two observers showed both a decrease in equivalent input noise (18% and 29%) and an increase in efficiency (17% and 71%). All five observers showed substantial improvement in Snellen acuity (approximately 26%) after practice. Perceptual learning can improve visual performance in amblyopic children. The improvement can be parsed into two important factors: decreased equivalent input noise and increased efficiency. Perceptual learning techniques may add an effective new method to the armamentarium of amblyopia treatments.

Impeller inlet geometry effect on performance improvement for centrifugal pumps

Energy Technology Data Exchange (ETDEWEB)

Luo, Xianwu; Zhang, Yao; Peng, Junqi; Xu, Hongyuan [Tsinghua University, Beijing (China); Yu, Weiping [Zhejiang Pump Works, Zhejiang (China)

2008-10-15

This research treats the effect of impeller inlet geometry on performance improvement for a boiler feed pump, who is a centrifugal pump having specific speed of 183 m.m{sup 3}min{sup -1}.min{sup -1} and close type impeller with exit diameter of 450 mm. The hydraulic performance and cavitation performance of the pump have been tested experimentally. In order to improve the pump, five impellers have been considered by extending the blade leading edge or applying much larger blade angle at impeller inlet compared with the original impeller. The 3-D turbulent flow inside those pumps has been analyzed basing on RNG k-{epsilon} turbulence model and VOF cavitation model. It is noted that the numerical results are fairly good compared with the experiments. Based on the experimental test and numerical simulation, the following conclusions can be drawn: (1) Impeller inlet geometry has important influence on performance improvement in the case of centrifugal pump. Favorite effects on performance improvement have been achieved by both extending the blade leading edge and applying much larger blade angle at impeller inlet: (2) It is suspected that the extended leading edge have favorite effect for improving hydraulic performance, and the much larger blade angle at impeller inlet have favorite effect for improving cavitation performance for the test pump: (3) Uniform flow upstream of impeller inlet is helpful for improving cavitation performance of the pump

SMART performance analysis methodology

International Nuclear Information System (INIS)

Lim, H. S.; Kim, H. C.; Lee, D. J.

2001-04-01

To ensure the required and desired operation over the plant lifetime, the performance analysis for the SMART NSSS design is done by means of the specified analysis methodologies for the performance related design basis events(PRDBE). The PRDBE is an occurrence(event) that shall be accommodated in the design of the plant and whose consequence would be no more severe than normal service effects of the plant equipment. The performance analysis methodology which systematizes the methods and procedures to analyze the PRDBEs is as follows. Based on the operation mode suitable to the characteristics of the SMART NSSS, the corresponding PRDBEs and allowable range of process parameters for these events are deduced. With the developed control logic for each operation mode, the system thermalhydraulics are analyzed for the chosen PRDBEs using the system analysis code. Particularly, because of different system characteristics of SMART from the existing commercial nuclear power plants, the operation mode, PRDBEs, control logic, and analysis code should be consistent with the SMART design. This report presents the categories of the PRDBEs chosen based on each operation mode and the transition among these and the acceptance criteria for each PRDBE. It also includes the analysis methods and procedures for each PRDBE and the concept of the control logic for each operation mode. Therefore this report in which the overall details for SMART performance analysis are specified based on the current SMART design, would be utilized as a guide for the detailed performance analysis

The Effect of Information Analysis Automation Display Content on Human Judgment Performance in Noisy Environments

Science.gov (United States)

Bass, Ellen J.; Baumgart, Leigh A.; Shepley, Kathryn Klein

2014-01-01

Displaying both the strategy that information analysis automation employs to makes its judgments and variability in the task environment may improve human judgment performance, especially in cases where this variability impacts the judgment performance of the information analysis automation. This work investigated the contribution of providing either information analysis automation strategy information, task environment information, or both, on human judgment performance in a domain where noisy sensor data are used by both the human and the information analysis automation to make judgments. In a simplified air traffic conflict prediction experiment, 32 participants made probability of horizontal conflict judgments under different display content conditions. After being exposed to the information analysis automation, judgment achievement significantly improved for all participants as compared to judgments without any of the automation's information. Participants provided with additional display content pertaining to cue variability in the task environment had significantly higher aided judgment achievement compared to those provided with only the automation's judgment of a probability of conflict. When designing information analysis automation for environments where the automation's judgment achievement is impacted by noisy environmental data, it may be beneficial to show additional task environment information to the human judge in order to improve judgment performance. PMID:24847184

The Effect of Information Analysis Automation Display Content on Human Judgment Performance in Noisy Environments.

Science.gov (United States)

Bass, Ellen J; Baumgart, Leigh A; Shepley, Kathryn Klein

2013-03-01

Displaying both the strategy that information analysis automation employs to makes its judgments and variability in the task environment may improve human judgment performance, especially in cases where this variability impacts the judgment performance of the information analysis automation. This work investigated the contribution of providing either information analysis automation strategy information, task environment information, or both, on human judgment performance in a domain where noisy sensor data are used by both the human and the information analysis automation to make judgments. In a simplified air traffic conflict prediction experiment, 32 participants made probability of horizontal conflict judgments under different display content conditions. After being exposed to the information analysis automation, judgment achievement significantly improved for all participants as compared to judgments without any of the automation's information. Participants provided with additional display content pertaining to cue variability in the task environment had significantly higher aided judgment achievement compared to those provided with only the automation's judgment of a probability of conflict. When designing information analysis automation for environments where the automation's judgment achievement is impacted by noisy environmental data, it may be beneficial to show additional task environment information to the human judge in order to improve judgment performance.

Preparing systems engineering and computing science students in disciplined methods, quantitative, and advanced statistical techniques to improve process performance

Science.gov (United States)

McCray, Wilmon Wil L., Jr.

The research was prompted by a need to conduct a study that assesses process improvement, quality management and analytical techniques taught to students in U.S. colleges and universities undergraduate and graduate systems engineering and the computing science discipline (e.g., software engineering, computer science, and information technology) degree programs during their academic training that can be applied to quantitatively manage processes for performance. Everyone involved in executing repeatable processes in the software and systems development lifecycle processes needs to become familiar with the concepts of quantitative management, statistical thinking, process improvement methods and how they relate to process-performance. Organizations are starting to embrace the de facto Software Engineering Institute (SEI) Capability Maturity Model Integration (CMMI RTM) Models as process improvement frameworks to improve business processes performance. High maturity process areas in the CMMI model imply the use of analytical, statistical, quantitative management techniques, and process performance modeling to identify and eliminate sources of variation, continually improve process-performance; reduce cost and predict future outcomes. The research study identifies and provides a detail discussion of the gap analysis findings of process improvement and quantitative analysis techniques taught in U.S. universities systems engineering and computing science degree programs, gaps that exist in the literature, and a comparison analysis which identifies the gaps that exist between the SEI's "healthy ingredients " of a process performance model and courses taught in U.S. universities degree program. The research also heightens awareness that academicians have conducted little research on applicable statistics and quantitative techniques that can be used to demonstrate high maturity as implied in the CMMI models. The research also includes a Monte Carlo simulation optimization

Optimization Techniques for Improving the Performance of Silicone-Based Dielectric Elastomers

DEFF Research Database (Denmark)

Skov, Anne Ladegaard; Yu, Liyun

2017-01-01

the electro-mechanical performance of dielectric elastomers are highlighted. Various optimization methods for improved energy transduction are investigated and discussed, with special emphasis placed on the promise each method holds. The compositing and blending of elastomers are shown to be simple, versatile...... methods that can solve a number of optimization issues. More complicated methods, involving chemical modification of the silicone backbone as well as controlling the network structure for improved mechanical properties, are shown to solve yet more issues. From the analysis, it is obvious...... that there is not a single optimization technique that will lead to the universal optimization of dielectric elastomer films, though each method may lead to elastomers with certain features, and thus certain potentials....

Implementation of Total Productive Maintenance (TPM to Improve Sheeter Machine Performance

Directory of Open Access Journals (Sweden)

Candra Nofri Eka

2017-01-01

Full Text Available This paper purpose is an evaluation of TPM implementation, as a case study at sheeter machine cut size line 5 finishing department, PT RAPP, Indonesia. Research methodology collected the Overall Equipment Effectiveness (OEE data of sheeter machine and computed its scores. Then, OEE analysis big losses, statistical analysis using SPSS 20 and focused maintenance evaluation of TPM were performed. The data collected to machine sheeter’s production for 10 months (January-October 2016. The data analyses was resulted the OEE average score of 82.75%. This score was still below the world class OEE (85% and the company target (90%. Based the big losses of OEE analysis was obtained the reduce speed losses, which most significant losses of OEE scores. The reduce speed losses value was 44.79% of total losses during the research period. The high score of these losses due to decreasing of machine production speed by operators, which intended to improve the quality of resulting products. The OEE scores statistical analysis was found breakdown losses and reduces speed losses, which significantly affected to OEE scores. Implementations of focused maintenance of TPM in the case study may need to improve because there were still occurred un-expecting losses during the research period.

42 CFR 494.110 - Condition: Quality assessment and performance improvement.

Science.gov (United States)

2010-10-01

... facility must maintain and demonstrate evidence of its quality improvement and performance improvement... RENAL DISEASE FACILITIES Patient Care § 494.110 Condition: Quality assessment and performance improvement. The dialysis facility must develop, implement, maintain, and evaluate an effective, data-driven...

The Effect of Information Analysis Automation Display Content on Human Judgment Performance in Noisy Environments

OpenAIRE

Bass, Ellen J.; Baumgart, Leigh A.; Shepley, Kathryn Klein

2012-01-01

Displaying both the strategy that information analysis automation employs to makes its judgments and variability in the task environment may improve human judgment performance, especially in cases where this variability impacts the judgment performance of the information analysis automation. This work investigated the contribution of providing either information analysis automation strategy information, task environment information, or both, on human judgment performance in a domain where noi...

Analysis of performance limitations for superconducting cavities

International Nuclear Information System (INIS)

J. R. Delayen; L. R. Doolittle; C. E. Reece

1998-01-01

The performance of superconducting cavities in accelerators can be limited by several factors, such as: field emission, quenches, arcing, rf power; and the maximum gradient at which a cavity can operate will be determined by the lowest of these limitations for that particular cavity. The CEBAF accelerator operates with over 300 cavities and, for each of them, the authors have determined the maximum operating gradient and its limiting factor. They have developed a model that allows them to determine the distribution of gradients that could be achieved for each of these limitations independently of the others. The result of this analysis can guide an R and D program to achieve the best overall performance improvement. The same model can be used to relate the performance of single-cell and multi-cell cavities

Improved power performance assessment methods

Energy Technology Data Exchange (ETDEWEB)

Frandsen, S; Antoniou, I; Dahlberg, J A [and others

1999-03-01

The uncertainty of presently-used methods for retrospective assessment of the productive capacity of wind farms is unacceptably large. The possibilities of improving the accuracy have been investigated and are reported. A method is presented that includes an extended power curve and site calibration. In addition, blockage effects with respect to reference wind speed measurements are analysed. It is found that significant accuracy improvements are possible by the introduction of more input variables such as turbulence and wind shear, in addition to mean wind speed and air density. Also, the testing of several or all machines in the wind farm - instead of only one or two - may provide a better estimate of the average performance. (au)

Accelerated Synchrotron X-ray Diffraction Data Analysis on a Heterogeneous High Performance Computing System

Energy Technology Data Exchange (ETDEWEB)

Qin, J; Bauer, M A, E-mail: qin.jinhui@gmail.com, E-mail: bauer@uwo.ca [Computer Science Department, University of Western Ontario, London, ON N6A 5B7 (Canada)

2010-11-01

The analysis of synchrotron X-ray Diffraction (XRD) data has been used by scientists and engineers to understand and predict properties of materials. However, the large volume of XRD image data and the intensive computations involved in the data analysis makes it hard for researchers to quickly reach any conclusions about the images from an experiment when using conventional XRD data analysis software. Synchrotron time is valuable and delays in XRD data analysis can impact decisions about subsequent experiments or about materials that they are investigating. In order to improve the data analysis performance, ideally to achieve near real time data analysis during an XRD experiment, we designed and implemented software for accelerated XRD data analysis. The software has been developed for a heterogeneous high performance computing (HPC) system, comprised of IBM PowerXCell 8i processors and Intel quad-core Xeon processors. This paper describes the software and reports on the improved performance. The results indicate that it is possible for XRD data to be analyzed at the rate it is being produced.

Accelerated Synchrotron X-ray Diffraction Data Analysis on a Heterogeneous High Performance Computing System

International Nuclear Information System (INIS)

Qin, J; Bauer, M A

2010-01-01

The analysis of synchrotron X-ray Diffraction (XRD) data has been used by scientists and engineers to understand and predict properties of materials. However, the large volume of XRD image data and the intensive computations involved in the data analysis makes it hard for researchers to quickly reach any conclusions about the images from an experiment when using conventional XRD data analysis software. Synchrotron time is valuable and delays in XRD data analysis can impact decisions about subsequent experiments or about materials that they are investigating. In order to improve the data analysis performance, ideally to achieve near real time data analysis during an XRD experiment, we designed and implemented software for accelerated XRD data analysis. The software has been developed for a heterogeneous high performance computing (HPC) system, comprised of IBM PowerXCell 8i processors and Intel quad-core Xeon processors. This paper describes the software and reports on the improved performance. The results indicate that it is possible for XRD data to be analyzed at the rate it is being produced.

The Genesis of a Trauma Performance Improvement Plan.

Science.gov (United States)

Pidgeon, Kristopher

2015-01-01

The purpose of this article is to assist the trauma medical and program director with developing a performance improvement and patients safety plan (PIPS), which is a required component of a successful trauma verification process by the American College of Surgeons. This article will review trauma quality standards and will describe in detail the required elements of a successful trauma center's performance improvement plan including a written comprehensive plan that outlines the mission and vision of the PIPS Program, authority of the PIPS Program, PIPS Program Committee reporting structure to the other hospital committees, list of required PIPS multidisciplinary team members, the operational components of the utilized data management system (trauma registry), list of indicators/audit filters, levels of review, peer determinations, corrective action plan with implementation, event resolution, and reevaluation. Strategies to develop a successful trauma performance improvement plan are presented.

Performance improvement using methodology: case study.

Science.gov (United States)

Harmelink, Stacy

2008-01-01

The department of radiology at St. Luke's Regional Medical Center in Sioux City, IA implemented meaningful workflow changes for reducing patient wait times and, at the same time, improved customer and employee satisfaction scores. Lean methodology and the 7 Deadly Wastes, along with small group interaction, was used to evaluate and change the process of a patient waiting for an exam in the radiology department. The most important key to the success of a performance improvement project is the involvement of staff.

Improving Manufacturing Performance in South Africa : Report of the ...

International Development Research Centre (IDRC) Digital Library (Canada)

1995-01-01

Improving Manufacturing Performance in South Africa : Report of the Industrial Strategy Project. Couverture du livre Improving Manufacturing Performance in South Africa. Author(s):. Avril Joffe, David Kaplan, Raphael Kaplinsky et David Lewis. Publisher(s):. UCT Press, CRDI. January 1, 1995. ISBN: Épuisé. 264 pages.

Statistical analysis in MSW collection performance assessment.

Science.gov (United States)

Teixeira, Carlos Afonso; Avelino, Catarina; Ferreira, Fátima; Bentes, Isabel

2014-09-01

The increase of Municipal Solid Waste (MSW) generated over the last years forces waste managers pursuing more effective collection schemes, technically viable, environmentally effective and economically sustainable. The assessment of MSW services using performance indicators plays a crucial role for improving service quality. In this work, we focus on the relevance of regular system monitoring as a service assessment tool. In particular, we select and test a core-set of MSW collection performance indicators (effective collection distance, effective collection time and effective fuel consumption) that highlights collection system strengths and weaknesses and supports pro-active management decision-making and strategic planning. A statistical analysis was conducted with data collected in mixed collection system of Oporto Municipality, Portugal, during one year, a week per month. This analysis provides collection circuits' operational assessment and supports effective short-term municipality collection strategies at the level of, e.g., collection frequency and timetables, and type of containers. Copyright © 2014 Elsevier Ltd. All rights reserved.

Does improved functional performance help to reduce urinary incontinence in institutionalized older women? a multicenter randomized clinical trial

Directory of Open Access Journals (Sweden)

Tak Erwin CPM

2012-09-01

Full Text Available Abstract Background Urinary incontinence (UI is a major problem in older women. Management is usually restricted to dealing with the consequences instead of treating underlying causes such as bladder dysfunction or reduced mobility. The aim of this multicenter randomized controlled trial was to compare a group-based behavioral exercise program to prevent or reduce UI, with usual care. The exercise program aimed to improve functional performance of pelvic floor muscle (PFM, bladder and physical performance of women living in homes for the elderly. Methods Twenty participating Dutch homes were matched and randomized into intervention or control homes using a random number generator. Homes recruited 6–10 older women, with or without UI, with sufficient cognitive and physical function to participate in the program comprising behavioral aspects of continence and physical exercises to improve PFM, bladder and physical performance. The program consisted of a weekly group training session and homework exercises and ran for 6 months during which time the control group participants received care as usual. Primary outcome measures after 6 months were presence or absence of UI, frequency of episodes (measured by participants and caregivers (not blinded using a 3-day bladder diary and the Physical Performance Test (blinded. Linear and logistic regression analysis based on the Intention to Treat (ITT principle using an imputed data set and per protocol analysis including all participants who completed the study and intervention (minimal attendance of 14 sessions. Results 102 participants were allocated to the program and 90 to care as usual. ITT analysis (n = 85 intervention, n = 70 control showed improvement of physical performance (intervention +8%; control −7% and no differences on other primary and secondary outcome measures. Per protocol analysis (n = 51 intervention, n = 60 control showed a reduction of participants with UI

Analysis of ESG indicators for measuring enterprise performance

Directory of Open Access Journals (Sweden)

Zuzana Chvátalová

2013-01-01

Full Text Available In this article authors focus on the analysis of the whole set of environmental, social and corporate governance (ESG indicators for the elimination of double or triple effects within the next construction of methods for measuring corporate performance. They build on their previously published results (in Acta univ. agric. et silvic. Mendel. Brun., 2012. The partial actual selected results of a recently undertaken currently project entitled ‘Construction of Methods for Multifactorial Assessment of Company Complex Performance in Selected Sectors’ were used. This project was solved the research teams of the Faculty of Business and Management of Brno University Technology and Faculty of Business and Economics of Mendel University in Brno since 2011. Further theoretical resources in the environmental, social and corporate governance area, known indicator databases (namely Global Reporting Initiative, comparative analysis, resp. syntheses for identifying possible of common indicator properties were identified to classify indicator subsets to preclude double or even triple effect based on mathematical set theory (Venn diagrams. The indicator analysis in constructed multi-factorial methods contributes to precise decision making in management to improve corporate performance.

Development of web based performance analysis program for nuclear power plant turbine cycle

International Nuclear Information System (INIS)

Park, Hoon; Yu, Seung Kyu; Kim, Seong Kun; Ji, Moon Hak; Choi, Kwang Hee; Hong, Seong Ryeol

2002-01-01

Performance improvement of turbine cycle affects economic operation of nuclear power plant. We developed performance analysis system for nuclear power plant turbine cycle. The system is based on PTC (Performance Test Code), that is estimation standard of nuclear power plant performance. The system is developed using Java Web-Start and JSP(Java Server Page)

[Conversation analysis for improving nursing communication].

Science.gov (United States)

Yi, Myungsun

2007-08-01

Nursing communication has become more important than ever before because quality of nursing services largely depends on the quality of communication in a very competitive health care environment. This article was to introduce ways to improve nursing communication using conversation analysis. This was a review study on conversation analysis, critically examining previous studies in nursing communication and interpersonal relationships. This study provided theoretical backgrounds and basic assumptions of conversation analysis which was influenced by ethnomethodology, phenomenology, and sociolinguistic. In addition, the characteristics and analysis methods of conversation analysis were illustrated in detail. Lastly, how conversation analysis could help improve communication was shown, by examining researches using conversation analysis not only for ordinary conversations but also for extraordinary or difficult conversations such as conversations between patients with dementia and their professional nurses. Conversation analysis can help in improving nursing communication by providing various structures and patterns as well as prototypes of conversation, and by suggesting specific problems and problem-solving strategies in communication.

Bacillus subtilis strain specificity affects performance improvement in broilers.

Science.gov (United States)

Rhayat, L; Jacquier, V; Brinch, K S; Nielsen, P; Nelson, A; Geraert, P-A; Devillard, E

2017-07-01

The study reports the effects on broiler performance of a newly isolated Bacillus subtilis strain, which is phylogenetically not closely related to already well-described strains of B. subtilis. In the first experiment, birds were reared in battery cages and exposed to C. perfringens. An increase in growth performance was observed with the strain when compared to the challenged animals. Three additional growth trials were conducted to 35 d of age, in different rearing conditions (genetic breeds, corn-soybean meal-based diet with or without animal proteins, in presence or absence of phytase, on fresh or used litter) to investigate the efficacy and the specificity of this new B. subtilis strain on the improvement of BWG and FCR of broilers in comparison with a B. subtilis-based DFM already used in the field. Whatever the rearing conditions tested, the new B. subtilis strain led to an average 3.2% improvement in feed conversion ratio or bodyweight. Comparatively, the commercial Bacillus strain significantly improved broiler performance in only one trial out of 3 with an average improvement reaching 2%. All these results indicate that this new B. subtilis strain consistently improves broiler performances. © 2017 Poultry Science Association Inc.

Clinical laboratory as an economic model for business performance analysis.

Science.gov (United States)

Buljanović, Vikica; Patajac, Hrvoje; Petrovecki, Mladen

2011-08-15

To perform SWOT (strengths, weaknesses, opportunities, and threats) analysis of a clinical laboratory as an economic model that may be used to improve business performance of laboratories by removing weaknesses, minimizing threats, and using external opportunities and internal strengths. Impact of possible threats to and weaknesses of the Clinical Laboratory at Našice General County Hospital business performance and use of strengths and opportunities to improve operating profit were simulated using models created on the basis of SWOT analysis results. The operating profit as a measure of profitability of the clinical laboratory was defined as total revenue minus total expenses and presented using a profit and loss account. Changes in the input parameters in the profit and loss account for 2008 were determined using opportunities and potential threats, and economic sensitivity analysis was made by using changes in the key parameters. The profit and loss account and economic sensitivity analysis were tools for quantifying the impact of changes in the revenues and expenses on the business operations of clinical laboratory. Results of simulation models showed that operational profit of €470 723 in 2008 could be reduced to only €21 542 if all possible threats became a reality and current weaknesses remained the same. Also, operational gain could be increased to €535 804 if laboratory strengths and opportunities were utilized. If both the opportunities and threats became a reality, the operational profit would decrease by €384 465. The operational profit of the clinical laboratory could be significantly reduced if all threats became a reality and the current weaknesses remained the same. The operational profit could be increased by utilizing strengths and opportunities as much as possible. This type of modeling may be used to monitor business operations of any clinical laboratory and improve its financial situation by implementing changes in the next fiscal

Effectiveness of autogenic training in improving motor performances in Parkinson's disease.

Science.gov (United States)

Ajimsha, M S; Majeed, Nisar A; Chinnavan, Elanchezhian; Thulasyammal, Ramiah Pillai

2014-06-01

Relaxation training can be an important adjunct in reducing symptoms associated with Parkinson's disease (PD). Autogenic Training (AT) is a simple, easily administered and inexpensive technique for retraining the mind and the body to be able to relax. AT uses visual imagery and body awareness to promote a state of deep relaxation. To investigate whether AT when used as an adjunct to Physiotherapy (PT) improves motor performances in PD in comparison with a control group receiving PT alone. Randomized, controlled, single blinded trial. Movement Disorder Clinic and Department of Physiotherapy, Sree Chithira Thirunal Institute of Medical Sciences and Technology in Trivandrum, Kerala, India. Patients with PD of grade 2 or 3 of Hoehn & Yahr (H&Y) scale (N = 66). AT group or control group. The techniques were administered by Physiotherapists trained in AT and consisted of 40 sessions per patient over 8 weeks. Motor score subscale of Unified Parkinson's Disease Rating Scale (UPDRS) was used to measure the motor performances. The primary outcome measure was the difference in Motor score subscale of UPDRS scores between Week 1 (pretest score), Week 8 (posttest score), and follow-up at Week 12 after randomization. The simple main effects analysis showed that the AT group performed better than the control group in weeks 8 and 12 (P < .005). Patients in the AT and control groups reported a 51.78% and 35.24% improvement, respectively, in their motor performances in Week 8 compared with that in Week 1, which persisted, in the follow-up (Week 12) as 30.82% in the AT group and 21.42% in the control group. This study provides evidence that AT when used as an adjunct to PT is more effective than PT alone in improving motor performances in PD patients. Copyright © 2014 Elsevier Ltd. All rights reserved.

The People Side of Performance Improvement.

Science.gov (United States)

Gerson, Richard F.

1999-01-01

Discusses 11 keys to the personal side of performance improvement, including positive attitude, high self esteem and positive self-image, communication skills, lifelong learning, caring about other people, health and well-being, motivation, goal setting, relaxation, visualization, and personal value system. (LRW)

ASSESSMENT OF WATER PUMPING SYSTEM AND IMPROVEMENT IN HYDRO-ENERGETIC PERFORMANCE

Directory of Open Access Journals (Sweden)

Augusto da Gama Rego

2017-01-01

Full Text Available Within the policy of sanitation services for all and the need t o lower electricity consumption, the current analysis evaluates the water pumping s ystem and defines actions for the improvement of hydro-energetic performance. The present research was divided into two sections: assessment of the water pumping syst em (based on hydro- energetic simulation and an analysis of the impact of ineffici ency on electric energy consumption (based on computer simulation. Results revealed th at methodology was satisfactory and that the main operational issues could be iden tified and corrections could be computer-simulated. A potential 16% reduction in consu mption and in electricity costs could be obtained.

Acute effects of caffeine-containing energy drinks on physical performance: a systematic review and meta-analysis.

Science.gov (United States)

Souza, Diego B; Del Coso, Juan; Casonatto, Juliano; Polito, Marcos D

2017-02-01

Caffeine-containing energy drinks (EDs) are currently used as ergogenic aids to improve physical performance in a wide variety of sport disciplines. However, the outcomes of previous investigations on this topic are inconclusive due to methodological differences, especially, in the dosage of the active ingredients and the test used to assess performance. We performed a systematic review and meta-analysis of published studies to evaluate the effects of acute ED intake on physical performance. The search for references was conducted in the databases PubMed, ISI Web of Knowledge and SPORTDiscus until December 2015. Thirty-four studies published between 1998 and 2015 were included in the analysis. Using a random-effects model, effect sizes (ES) were calculated as the standardized mean difference. Overall, ED ingestion improved physical performance in muscle strength and endurance (ES = 0.49; p performance (slope = 0.0001; p = 0.04), but not between caffeine dosage (mg) and performance (slope = 0.0009; p = 0.21). ED ingestion improved performance in muscle strength and endurance, endurance exercise tests, jumping and sport-specific actions. However, the improvement in performance was associated with taurine dosage.

Preliminary study to improve the performance of SCWR-M during loss-of-flow accident

Energy Technology Data Exchange (ETDEWEB)

Liu, X.J., E-mail: xiaojingliu@sjtu.edu.cn [School of Nuclear Science and Engineering, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 200240 (China); Sun, C.; Wang, Z.D.; Chai, X.; Xiong, J.B.; Yang, Y.H. [School of Nuclear Science and Engineering, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 200240 (China); Cheng, X. [Institute of Fusion and Nuclear Technology, Karlsruhe Institute of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe (Germany)

2016-10-15

Highlights: • Validation of the ATHLET-SC code to the safety analysis for SCWR. • Loss of flow accident analysis for SCWR-M is performed. • The passive design parameter is optimized. • The optimized SCWR-M design shows a better safety performance. - Abstract: The SCWR-M is one of the conceptual core designs with mixed neutron spectrum (fast and thermal), which is developed at Shanghai Jiao Tong University. Some preliminary calculations of this new conceptual SCWR indicate the SCWR-M system gets better safety characteristics compared to other single spectrum supercritical water cooled reactors. Loss of flow accident (LOFA) is of particular importance among the abnormal events and accidents for SCWR-M. In order to perform the preliminary study to improve the current SCWR-M safety design, this paper presents the validation results of the ATHLET-SC code and optimization work for safety system design parameters of the ICS, ACC, GDCS based on LOFA analysis. The better performance of the optimized design parameters are demonstrated by comparison with the previous design.

Pre-task music improves swimming performance.

Science.gov (United States)

Smirmaul, B P; Dos Santos, R V; Da Silva Neto, L V

2015-12-01

The purpose of this study was to investigate the effects of pre-task music on swimming performance and other psychological variables. A randomized counterbalanced within-subjects (experimental and control condition) design was employed. Eighteen regional level male swimmers performed two 200-m freestyle swimming time trials. Participants were exposed to either 5 minutes of self-selected music (pre-task music condition) or 5 minutes of silence (control condition) and, after 1 minute, performed the swimming task. Swimming time was significantly shorter (-1.44%) in the pre-task music condition. Listening to pre-task music increased motivation to perform the swimming task, while arousal remained unchanged. While fatigue increased after the swimming task in both conditions, vigor, ratings of perceived exertion and affective valence were unaltered. It is concluded, for the first time, that pre-task music improves swimming performance.

Performance Improvement Quarterly. Volume 15, Number 1, 2002

National Research Council Canada - National Science Library

2002-01-01

Performance Improvement Quarterly (PIQ) is a peer-reviewed journal whose goal is to stimulate professional discussion in the field and to advance the discipline of performance technology through the publication of scholarly works...

Windows with improved energy performance

DEFF Research Database (Denmark)

Noyé, Peter Anders; Laustsen, Jacob Birck; Svendsen, Svend

2002-01-01

According to the Danish energy protocol, Energy 21, one of the goals with highest priority is to reduce the CO2-emission. Energy consumption for domestic heating is a major contributor to the CO2-emission; hence one of the primary efforts to reach the goal is by saving energy in the households...... performances. During the last 20 years the U-value of the glazing part of windows has been improved considerably, but the frame part has not followed the same development with respect to energy performance. Therefore an increasingly large part of the total heat loss through windows is relating to the frame...... part, for which reason, as far as energy efficiency and total economy are concerned, it has become more interesting to further develop frame structures. Traditionally, the energy performance of windows has primarily been characterised by the heat loss coefficient, U-value. However as the heat loss has...

Analysis of Economic Performance in Mergers and Acquisition

Institute of Scientific and Technical Information of China (English)

王立杰; 孙涛

2003-01-01

Based on the methods of financial analysis, the direct earnings in mergers and acquisition M&A, profit or loss from stock price fluctuation, influence on the earning per stock(EPS) and revenue growth after M&A were analyzed in detail. And several quantitative models were established in relevant part accordingly. It can be useful to improve the present low efficiency in the M&A performance in Chinese capital market.

Experimental studies on improvement of coefficient of performance of window air conditioning unit

Directory of Open Access Journals (Sweden)

Tharves Mohideen Sheik Ismail

2017-01-01

Full Text Available This paper presents the performance analysis of a window air conditioner unit incorporated with wick less loop heat pipes (WLHP. The WLHP are located on the evaporator side of the air conditioning unit. The working medium for the WLHP is R134a refrigerant gas, an alternate refrigerant. The supply and return humidity of room air, the heat removal rat, and the coefficient of performance of the unit are analyzed for various ambient and room temperatures before and after incorporation of WLHP. The performance curves are drawn by comparing the power consumption and humidity collection rates for various room and ambient temperatures. The results show that coefficient of performance of the unit is improved by 18% to 20% after incorporation of WLHP due to pre-cooling of return air by WLHP, which reduces the thermal load on compressor. Similarly, the energy consumption is reduced by 20% to 25% due to higher thermostat setting and the humidity collection is improved by 35% due to pre-cooling effect of WLHP. The results are tabulated and conclusion drawn is presented based on the performance.

Improved iodine status is associated with improved mental performance of schoolchildren in Benin.

Science.gov (United States)

van den Briel, T; West, C E; Bleichrodt, N; van de Vijver, F J; Ategbo, E A; Hautvast, J G

2000-11-01

An adequate iodine supply in utero and shortly after birth is known to be crucial to an individual's physical and mental development. The question of whether iodine supplementation later in life can exert a favorable influence on the mental performance of iodine-deficient populations was addressed in various studies, but with contradictory results. The aim of this study was to examine the effect of an improvement in iodine status on mental and psychomotor performance of schoolchildren (7-11 y) who were moderately to severely iodine deficient. The study, which was originally planned as a double-blind, randomized, placebo-controlled intervention, was carried out in an iodine-deficient population of schoolchildren (n = 196) in northern Benin. As the population began to have access to iodized salt during the 1-y intervention period, the study population was split post hoc-on the basis of urinary iodine concentrations-into a group with improved iodine status and a group with unchanged iodine status. Changes in mental and psychomotor performance over the intervention period were compared. Children with increased urinary iodine concentrations had a significantly greater increase in performance on the combination of mental tests than did the group with no change in urinary iodine concentrations. An improvement in iodine status, rather than iodine status itself, determined mental performance in this population, which was initially iodine deficient. These findings suggest a "catch-up" effect in terms of mental performance.

Improving financial performance by modeling and analysis of radiology procedure scheduling at a large community hospital.

Science.gov (United States)

Lu, Lingbo; Li, Jingshan; Gisler, Paula

2011-06-01

Radiology tests, such as MRI, CT-scan, X-ray and ultrasound, are cost intensive and insurance pre-approvals are necessary to get reimbursement. In some cases, tests may be denied for payments by insurance companies due to lack of pre-approvals, inaccurate or missing necessary information. This can lead to substantial revenue losses for the hospital. In this paper, we present a simulation study of a centralized scheduling process for outpatient radiology tests at a large community hospital (Central Baptist Hospital in Lexington, Kentucky). Based on analysis of the central scheduling process, a simulation model of information flow in the process has been developed. Using such a model, the root causes of financial losses associated with errors and omissions in this process were identified and analyzed, and their impacts were quantified. In addition, "what-if" analysis was conducted to identify potential process improvement strategies in the form of recommendations to the hospital leadership. Such a model provides a quantitative tool for continuous improvement and process control in radiology outpatient test scheduling process to reduce financial losses associated with process error. This method of analysis is also applicable to other departments in the hospital.

Combined analysis of cortical (EEG) and nerve stump signals improves robotic hand control.

Science.gov (United States)

Tombini, Mario; Rigosa, Jacopo; Zappasodi, Filippo; Porcaro, Camillo; Citi, Luca; Carpaneto, Jacopo; Rossini, Paolo Maria; Micera, Silvestro

2012-01-01

Interfacing an amputee's upper-extremity stump nerves to control a robotic hand requires training of the individual and algorithms to process interactions between cortical and peripheral signals. To evaluate for the first time whether EEG-driven analysis of peripheral neural signals as an amputee practices could improve the classification of motor commands. Four thin-film longitudinal intrafascicular electrodes (tf-LIFEs-4) were implanted in the median and ulnar nerves of the stump in the distal upper arm for 4 weeks. Artificial intelligence classifiers were implemented to analyze LIFE signals recorded while the participant tried to perform 3 different hand and finger movements as pictures representing these tasks were randomly presented on a screen. In the final week, the participant was trained to perform the same movements with a robotic hand prosthesis through modulation of tf-LIFE-4 signals. To improve the classification performance, an event-related desynchronization/synchronization (ERD/ERS) procedure was applied to EEG data to identify the exact timing of each motor command. Real-time control of neural (motor) output was achieved by the participant. By focusing electroneurographic (ENG) signal analysis in an EEG-driven time window, movement classification performance improved. After training, the participant regained normal modulation of background rhythms for movement preparation (α/β band desynchronization) in the sensorimotor area contralateral to the missing limb. Moreover, coherence analysis found a restored α band synchronization of Rolandic area with frontal and parietal ipsilateral regions, similar to that observed in the opposite hemisphere for movement of the intact hand. Of note, phantom limb pain (PLP) resolved for several months. Combining information from both cortical (EEG) and stump nerve (ENG) signals improved the classification performance compared with tf-LIFE signals processing alone; training led to cortical reorganization and

Carbohydrate mouth rinse: does it improve endurance exercise performance?

Directory of Open Access Journals (Sweden)

Painelli Vitor

2010-08-01

Full Text Available Abstract It is well known that carbohydrate (CHO supplementation can improve performance in endurance exercises through several mechanisms such as maintenance of glycemia and sparing endogenous glycogen as well as the possibility of a central nervous-system action. Some studies have emerged in recent years in order to test the hypothesis of ergogenic action via central nervous system. Recent studies have demonstrated that CHO mouth rinse can lead to improved performance of cyclists, and this may be associated with the activation of brain areas linked to motivation and reward. These findings have already been replicated in other endurance modalities, such as running. This alternative seems to be an attractive nutritional tool to improve endurance exercise performance.

Do school inspections improve primary school performance?

OpenAIRE

Dinand Webbink; Rob Luginbuhl; I. de Wolf

2007-01-01

Inspectors from the Dutch Inspectorate of Education inspect primary schools, write inspection reports on each inspected school, and make recommendations as to how each school can improve. We test whether these inspections result in better school performance. Using a fixed-effects model, we find evidence that school inspections do lead to measurably better school performance. Our assessment of school performance is based on the Cito test scores of pupils in their final year of primary school. ...

Measurement uncertainty analysis techniques applied to PV performance measurements

International Nuclear Information System (INIS)

Wells, C.

1992-10-01

The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results

Measurement uncertainty analysis techniques applied to PV performance measurements

Energy Technology Data Exchange (ETDEWEB)

Wells, C.

1992-10-01

The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

Measurement uncertainty analysis techniques applied to PV performance measurements

Energy Technology Data Exchange (ETDEWEB)

Wells, C

1992-10-01

The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment`s final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

Improving Language Learning Strategies and Performance of Pre-Service Language Teachers Through a CALLA-TBLT Model

Directory of Open Access Journals (Sweden)

Maria Eugenia Guapacha Chamorro

2017-07-01

Full Text Available This paper reports an action-research study on language learning strategies in tertiary education at a Colombian university. The study aimed at improving the English language performance and language learning strategies use of 33 first-year pre-service language teachers by combining elements from two models: the cognitive academic language learning approach and task-based language teaching. Data were gathered through surveys, a focus group, students’ and teachers’ journals, language tests, and documentary analysis. Results evidenced that the students improved in speaking, writing, grammar, vocabulary and in their language learning strategies repertoire. As a conclusion, explicit strategy instruction in the proposed model resulted in a proper combination to improve learners’ language learning strategies and performance.

MO-FG-202-06: Improving the Performance of Gamma Analysis QA with Radiomics- Based Image Analysis

Energy Technology Data Exchange (ETDEWEB)

Wootton, L; Nyflot, M; Ford, E [University of Washington Department of Radiation Oncology, Seattle, WA (United States); Chaovalitwongse, A [University of Washington Department of Industrial and Systems Engineering, Seattle, Washington (United States); University of Washington Department of Radiology, Seattle, WA (United States); Li, N [University of Washington Department of Industrial and Systems Engineering, Seattle, Washington (United States)

2016-06-15

Purpose: The use of gamma analysis for IMRT quality assurance has well-known limitations. Traditionally, a simple thresholding technique is used to evaluated passing criteria. However, like any image the gamma distribution is rich in information which thresholding mostly discards. We therefore propose a novel method of analyzing gamma images that uses quantitative image features borrowed from radiomics, with the goal of improving error detection. Methods: 368 gamma images were generated from 184 clinical IMRT beams. For each beam the dose to a phantom was measured with EPID dosimetry and compared to the TPS dose calculated with and without normally distributed (2mm sigma) errors in MLC positions. The magnitude of 17 intensity histogram and size-zone radiomic features were derived from each image. The features that differed most significantly between image sets were determined with ROC analysis. A linear machine-learning model was trained on these features to classify images as with or without errors on 180 gamma images.The model was then applied to an independent validation set of 188 additional gamma distributions, half with and half without errors. Results: The most significant features for detecting errors were histogram kurtosis (p=0.007) and three size-zone metrics (p<1e-6 for each). The sizezone metrics detected clusters of high gamma-value pixels under mispositioned MLCs. The model applied to the validation set had an AUC of 0.8, compared to 0.56 for traditional gamma analysis with the decision threshold restricted to 98% or less. Conclusion: A radiomics-based image analysis method was developed that is more effective in detecting error than traditional gamma analysis. Though the pilot study here considers only MLC position errors, radiomics-based methods for other error types are being developed, which may provide better error detection and useful information on the source of detected errors. This work was partially supported by a grant from the Agency for

A High Intensity Interval Training (HIIT)-Based Running Plan Improves Athletic Performance by Improving Muscle Power.

Science.gov (United States)

García-Pinillos, Felipe; Cámara-Pérez, Jose C; Soto-Hermoso, Víctor M; Latorre-Román, Pedro Á

2017-01-01

García-Pinillos, F, Cámara-Pérez, JC, Soto-Hermoso, VM, and Latorre-Román, PÁ. A High Intensity Interval Training (HIIT)-based running plan improves athletic performance by improving muscle power. J Strength Cond Res 31(1): 146-153, 2017-This study aimed to examine the effect of a 5-week high-intensity intermittent training (HIIT)-based running plan on athletic performance and to compare the physiological and neuromuscular responses during a sprint-distance triathlon before and after the HIIT period. Thirteen triathletes were matched into 2 groups: the experimental group (EG) and the control group (CG). The CG was asked to maintain their normal training routines, whereas the EG maintained only their swimming and cycling routines and modified their running routine. Participants completed a sprint-distance triathlon before (pretest) and after (posttest) the intervention period. In both pretest and posttest, the participants performed 4 jumping tests: before the race (baseline), postswim, postcycling, and postrun. Additionally, heart rate was monitored (HRmean), whereas rate of perceived exertion (RPE) and blood lactate accumulation (BLa) were registered after the race. No significant differences (p ≥ 0.05) between groups were found before HIIT intervention (at pretest). Significant group-by-training interactions were found in vertical jumping ability and athletic performance: the EG improved jumping performance (∼6-9%, p ≤ 0.05, effect size (ES) > 0.7), swimming performance (p = 0.013, ES = 0.438), and running time (p = 0.001, ES = 0.667) during the competition, whereas the CG remained unchanged (p ≥ 0.05, ES HIIT-based running plan combined with the high training volumes of these triathletes in swimming and cycling improved athletic performance during a sprint-distance triathlon. This improvement may be due to improved neuromuscular characteristics that were transferred into improved muscle power and work economy.

Location decision strategies for improving SMME business performance

Directory of Open Access Journals (Sweden)

Shereen Barnard

2011-12-01

Full Text Available Purpose: The primary objective of this study is to investigate the macro-environmental factors that may influence location decisions and how these choices may affect the business performance of SMMEs. Problem investigated: SMMEs in South Africa play an increasingly important role in stimulating economic activity, growth and employment creation. However, many SMMEs cease to exist within the first five years of operation due to various challenges faced by SMMEs on a daily basis. Many SMMEs owners disregard the importance of location, yet the geographical location can negatively influence the survival of the business. Several factors influence the choice of the location, which will ultimately have either a positive or negative effect on business performance. Methodology: A positivistic research methodology was adopted for this study. Seven hypotheses were constructed to achieve the primary objective of this study. The population for this study consisted of SMMEs in the Nelson Mandela Metropole from which a convenience sample of 175 SMMEs was selected. The measuring instrument, a self-developed questionnaire, consisted of three sections. The data collected included the demographical data of the respondents and their businesses, statements on location and various factors influencing location decisions as well as measurements of business performance. Cronbach Alpha coefficients were calculated to determine the reliability of the questionnaire items. Data analysis was done by calculating descriptive statistics, Pearson correlation coefficients and conducting a simple linear regression analysis. Cohen's d was used to determine the significance of between-factor differences. Findings and implications: The results of the study showed that positive relationships existed between all the independent variables (location, rental rates, employment, inflation, interest rates and green buildings and the dependent variable (business performance except for the

Residents' surgical performance during the laboratory years: an analysis of rule-based errors.

Science.gov (United States)

Nathwani, Jay N; Wise, Brett J; Garren, Margaret E; Mohamadipanah, Hossein; Van Beek, Nicole; DiMarco, Shannon M; Pugh, Carla M

2017-11-01

Nearly one-third of surgical residents will enter into academic development during their surgical residency by dedicating time to a research fellowship for 1-3 y. Major interest lies in understanding how laboratory residents' surgical skills are affected by minimal clinical exposure during academic development. A widely held concern is that the time away from clinical exposure results in surgical skills decay. This study examines the impact of the academic development years on residents' operative performance. We hypothesize that the use of repeated, annual assessments may result in learning even without individual feedback on participants simulated performance. Surgical performance data were collected from laboratory residents (postgraduate years 2-5) during the summers of 2014, 2015, and 2016. Residents had 15 min to complete a shortened, simulated laparoscopic ventral hernia repair procedure. Final hernia repair skins from all participants were scored using a previously validated checklist. An analysis of variance test compared the mean performance scores of repeat participants to those of first time participants. Twenty-seven (37% female) laboratory residents provided 2-year assessment data over the 3-year span of the study. Second time performance revealed improvement from a mean score of 14 (standard error = 1.0) in the first year to 17.2 (SD = 0.9) in the second year, (F[1, 52] = 5.6, P = 0.022). Detailed analysis demonstrated improvement in performance for 3 grading criteria that were considered to be rule-based errors. There was no improvement in operative strategy errors. Analysis of longitudinal performance of laboratory residents shows higher scores for repeat participants in the category of rule-based errors. These findings suggest that laboratory residents can learn from rule-based mistakes when provided with annual performance-based assessments. This benefit was not seen with operative strategy errors and has important implications for

Characterizing performance improvement in primary care systems in Mesoamerica: A realist evaluation protocol.

Science.gov (United States)

Munar, Wolfgang; Wahid, Syed S; Curry, Leslie

2018-01-03

Background . Improving performance of primary care systems in low- and middle-income countries (LMICs) may be a necessary condition for achievement of universal health coverage in the age of Sustainable Development Goals. The Salud Mesoamerica Initiative (SMI), a large-scale, multi-country program that uses supply-side financial incentives directed at the central-level of governments, and continuous, external evaluation of public, health sector performance to induce improvements in primary care performance in eight LMICs. This study protocol seeks to explain whether and how these interventions generate program effects in El Salvador and Honduras. Methods . This study presents the protocol for a study that uses a realist evaluation approach to develop a preliminary program theory that hypothesizes the interactions between context, interventions and the mechanisms that trigger outcomes. The program theory was completed through a scoping review of relevant empirical, peer-reviewed and grey literature; a sense-making workshop with program stakeholders; and content analysis of key SMI documents. The study will use a multiple case-study design with embedded units with contrasting cases. We define as a case the two primary care systems of Honduras and El Salvador, each with different context characteristics. Data will be collected through in-depth interviews with program actors and stakeholders, documentary review, and non-participatory observation. Data analysis will use inductive and deductive approaches to identify causal patterns organized as 'context, mechanism, outcome' configurations. The findings will be triangulated with existing secondary, qualitative and quantitative data sources, and contrasted against relevant theoretical literature. The study will end with a refined program theory. Findings will be published following the guidelines generated by the Realist and Meta-narrative Evidence Syntheses study (RAMESES II). This study will be performed

Framework for continuous performance improvement in small drinking water systems.

Science.gov (United States)

Bereskie, Ty; Haider, Husnain; Rodriguez, Manuel J; Sadiq, Rehan

2017-01-01

Continuous performance improvement (CPI) can be a useful approach to overcome water quality problems impacting small communities. Small drinking water systems (SDWSs) struggle to meet regulatory requirements and often lack the economic and human resource flexibility for immediate improvement. A CPI framework is developed to provide SDWS managers and operators an approach to gauge their current performance against similar systems and to track performance improvement from the implementation of the new technologies or innovations into the future. The proposed CPI framework incorporates the use of a water quality index (WQI) and functional performance benchmarking to evaluate and compare drinking water quality performance of an individual water utility against that of a representative benchmark. The results are then used to identify and prioritize the most vulnerable water quality indicators and subsequently identify and prioritize performance improvement strategies. The proposed CPI framework has been demonstrated using data collected from SDWSs in the province of Newfoundland and Labrador (NL), Canada and using the Canadian Council of Ministers of the Environment (CCME) WQI. Copyright © 2016 Elsevier B.V. All rights reserved.

Functional improvement after carotid endarterectomy: demonstrated by gait analysis and acetazolamide stress brain perfusion SPECT

International Nuclear Information System (INIS)

Kim, J. S.; Kim, G. E.; Yoo, J. Y.; Kim, D. G.; Moon, D. H.

2005-01-01

Scientific documentation of neurologic improvement following carotid endarterectomy (CEA) has not been established. The purpose of this prospective study is to investigate whether CEA performed for the internal carotid artery flow lesion improves gait and cerebrovascular hemodynamic status in patients with gait disturbance. We prospectively performed pre- and postCEA gait analysis and acetazolamide stress brain perfusion SPECT (Acz-SPECT) with Tc-99m ECD in 91 patients (M/F: 81/10, mean age: 64.1 y) who had gait disturbance before receiving CEA. Gait performance was assessed using a Vicon 370 motion analyzer. The gait improvement after CEA was correlated to cerebrovascular hemodynamic change as well as symptom duration. 12 hemiparetic stroke patients (M/F=9/3, mean age: 51 y) who did not receive CEA as a control underwent gait analysis twice in a week interval to evaluate whether repeat testing of gait performance shows learning effect. Of 91 patients, 73 (80%) patients showed gait improvement (change of gait speed > 10%) and 42 (46%) showed marked improvement (change of gait speed > 20%), but no improvement was observed in control group at repeat test. Post-operative cerebrovascular hemodynamic improvement was noted in 49 (54%) of 91 patients. There was marked gait improvement in patients group with cerebrovascular hemodynamic improvement compared to no change group (p<0.05). Marked gait improvement and cerebrovascular hemodynamic improvement were noted in 53% and 61% of the patient who had less than 3 month history of symptom compared to 31% and 24% of the patients who had longer than 3 months, respectively (p<0.05). Marked gait improvement was obtained in patients who had improvement of cerebrovascular hemodynamic status on Acz-SPECT after CEA. These results suggest functional improvement such as gait can result from the improved perfusion of misery perfusion area, which is viable for a longer period compared to literatures previously reported

Good practices for improved nuclear power plant performance

International Nuclear Information System (INIS)

1989-04-01

This report provides an overview of operational principles, practice and improvements which have contributed to good performance of eight selected world nuclear power stations. The IAEA Power Reactor Information System (PRIS) was used to identify a population of good performers. It is recognized that there are many other good performing nuclear power stations not included in this report. Specific criteria described in the introduction were used in selecting these eight stations. The information contained in this report was obtained by the staff from IAEA, Division of Nuclear Power. This was accomplished by visits to the stations and visits to a number of utility support groups and three independent organizations which provide support to more than one utility. The information in this report is intended as an aid for operating organizations to identify possible improvement initiatives to enhance plant performance. Figs and tabs

Development of Human Performance Analysis and Advanced HRA Methodology

Energy Technology Data Exchange (ETDEWEB)

Jung, Won Dea; Park, Jin Kyun; Kim, Jae Whan; Kim, Seong Whan; Kim, Man Cheol; Ha, Je Joo

2007-06-15

The purpose of this project is to build a systematic framework that can evaluate the effect of human factors related problems on the safety of nuclear power plants (NPPs) as well as develop a technology that can be used to enhance human performance. The research goal of this project is twofold: (1) the development of a human performance database and a framework to enhance human performance, and (2) the analysis of human error with constructing technical basis for human reliability analysis. There are three kinds of main results of this study. The first result is the development of a human performance database, called OPERA-I/II (Operator Performance and Reliability Analysis, Part I and Part II). In addition, a standard communication protocol was developed based on OPERA to reduce human error caused from communication error in the phase of event diagnosis. Task complexity (TACOM) measure and the methodology of optimizing diagnosis procedures were also finalized during this research phase. The second main result is the development of a software, K-HRA, which is to support the standard HRA method. Finally, an advanced HRA method named as AGAPE-ET was developed by combining methods MDTA (misdiagnosis tree analysis technique) and K-HRA, which can be used to analyze EOC (errors of commission) and EOO (errors of ommission). These research results, such as OPERA-I/II, TACOM, a standard communication protocol, K-HRA and AGAPE-ET methods will be used to improve the quality of HRA and to enhance human performance in nuclear power plants.

Development of Human Performance Analysis and Advanced HRA Methodology

International Nuclear Information System (INIS)

Jung, Won Dea; Park, Jin Kyun; Kim, Jae Whan; Kim, Seong Whan; Kim, Man Cheol; Ha, Je Joo

2007-06-01

The purpose of this project is to build a systematic framework that can evaluate the effect of human factors related problems on the safety of nuclear power plants (NPPs) as well as develop a technology that can be used to enhance human performance. The research goal of this project is twofold: (1) the development of a human performance database and a framework to enhance human performance, and (2) the analysis of human error with constructing technical basis for human reliability analysis. There are three kinds of main results of this study. The first result is the development of a human performance database, called OPERA-I/II (Operator Performance and Reliability Analysis, Part I and Part II). In addition, a standard communication protocol was developed based on OPERA to reduce human error caused from communication error in the phase of event diagnosis. Task complexity (TACOM) measure and the methodology of optimizing diagnosis procedures were also finalized during this research phase. The second main result is the development of a software, K-HRA, which is to support the standard HRA method. Finally, an advanced HRA method named as AGAPE-ET was developed by combining methods MDTA (misdiagnosis tree analysis technique) and K-HRA, which can be used to analyze EOC (errors of commission) and EOO (errors of ommission). These research results, such as OPERA-I/II, TACOM, a standard communication protocol, K-HRA and AGAPE-ET methods will be used to improve the quality of HRA and to enhance human performance in nuclear power plants

Improving Steam System Performance: A Sourcebook for Industry, Second Edition

Energy Technology Data Exchange (ETDEWEB)

None

2012-02-23

This sourcebook is designed to provide steam system users with a reference that describes the basic steam system components, outlines opportunities for energy and performance improvements, and discusses the benefits of a systems approach in identifying and implementing these improvement opportunities. The sourcebook is divided into three main sections: steam system basics, performance improvement opportunities, and where to find help.

CF6 jet engine performance improvement program. Task 1: Feasibility analysis

Science.gov (United States)

Fasching, W. A.

1979-01-01

Technical and economic engine improvement concepts selected for subsequent development include: (1) fan improvement; (2) short core exhaust; (3) HP turbine aerodynamic improvement; (4) HP turbine roundness control; (5) HP turbine active clearance control; and (6) cabin air recirculation. The fuel savings for the selected engine modification concepts for the CF6 fleet are estimated.

Research and implementation on improving I/O performance of streaming media storage system

Science.gov (United States)

Lu, Zheng-wu; Wang, Yu-de; Jiang, Guo-song

2008-12-01

In this paper, we study the special requirements of a special storage system: streaming media server, and propose a solution to improve I/O performance of RAID storage system. The solution is suitable for streaming media applications. A streaming media storage subsystem includes the I/O interfaces, RAID arrays, I/O scheduling and device drivers. The solution is implemented on the top of the storage subsystem I/O Interface. Storage subsystem is the performance bottlenecks of a streaming media system, and I/O interface directly affect the performance of the storage subsystem. According to theoretical analysis, 64 KB block-size is most appropriate for streaming media applications. We carry out experiment in detail, and verified that the proper block-size really is 64KB. It is in accordance with our analysis. The experiment results also show that by using DMA controller, efficient memory management technology and mailbox interface design mechanism, streaming media storage system achieves a high-speed data throughput.

Analysis of Refrigeration Cycle Performance with an Ejector

Directory of Open Access Journals (Sweden)

Wani J. R.

2016-01-01

Full Text Available A conventional refrigeration cycle uses expansion device between the condenser and the evaporator which has losses during the expansion process. A refrigeration cycle with ejector is a promising modification to improve the performance of conventional refrigeration cycle. The ejector is used to recover some of the available work so that the compressor suction pressure increases. To investigate the enhancement a model with R134a refrigerant was developed. To solve the set of equations and simulate the cycle performance a subroutine was written on engineering equation solver (EES environment. At specific conditions, the refrigerant properties are obtained from EES. At the design conditions the ejector refrigeration cycle achieved 5.141 COP compared to 4.609 COP of the conventional refrigeration cycle. This means that ejector refrigeration cycle offers better COP with 10.35% improvement compared to conventional refrigeration cycle. Parametric analysis of ejector refrigeration cycle indicated that COP was influenced significantly by evaporator and condenser temperatures, entrainment ratio and diffuser efficiency.

Performance improvement of professional printing systems : from theory to practice

NARCIS (Netherlands)

Ezzeldin Mahdy Abdelmonem, M.

2012-01-01

Performance Improvement of Professional Printing Systems: from theory to practice Markets demand continuously for higher quality, higher speed, and more energy-efficient professional printers. In this thesis, control strategies have been developed to improve the performance of both professional

Cost-Effectiveness Analysis in Practice: Interventions to Improve High School Completion

Science.gov (United States)

Hollands, Fiona; Bowden, A. Brooks; Belfield, Clive; Levin, Henry M.; Cheng, Henan; Shand, Robert; Pan, Yilin; Hanisch-Cerda, Barbara

2014-01-01

In this article, we perform cost-effectiveness analysis on interventions that improve the rate of high school completion. Using the What Works Clearinghouse to select effective interventions, we calculate cost-effectiveness ratios for five youth interventions. We document wide variation in cost-effectiveness ratios between programs and between…

IEEE 802.11 Wireless LANs: Performance Analysis and Protocol Refinement

Directory of Open Access Journals (Sweden)

Chatzimisios P.

2005-01-01

Full Text Available The IEEE 802.11 protocol is emerging as a widely used standard and has become the most mature technology for wireless local area networks (WLANs. In this paper, we focus on the tuning of the IEEE 802.11 protocol parameters taking into consideration, in addition to throughput efficiency, performance metrics such as the average packet delay, the probability of a packet being discarded when it reaches the maximum retransmission limit, the average time to drop a packet, and the packet interarrival time. We present an analysis, which has been validated by simulation that is based on a Markov chain model commonly used in the literature. We further study the improvement on these performance metrics by employing suitable protocol parameters according to the specific communication needs of the IEEE 802.11 protocol for both basic access and RTS/CTS access schemes. We show that the use of a higher initial contention window size does not considerably degrade performance in small networks and performs significantly better in any other scenario. Moreover, we conclude that the combination of a lower maximum contention window size and a higher retry limit considerably improves performance. Results indicate that the appropriate adjustment of the protocol parameters enhances performance and improves the services that the IEEE 802.11 protocol provides to various communication applications.

Performance values of nondestructive analysis techniques in safeguards and nuclear materials management

International Nuclear Information System (INIS)

Guardini, S.

1989-01-01

Nondestructive assay (NDA) techniques have, in the past few years, become more and more important in nuclear material accountancy and control. This is essentially due to two reasons: (1) The improvements made in most NDA techniques led some of them to have performances close to destructive analysis (DA) (e.g., calorimetry and gamma spectrometry). (2) The parallel improvement of statistical tools and procedural inspection approaches led to abandoning the following scheme: (a) NDA for semiqualitative or consistency checks only (b) DA for quantitative measurements. As a consequence, NDA is now frequently used in scenarios that involve quantitative (by variable) analysis. On the other hand, it also became evident that the performances of some techniques were different depending on whether they were applied in the laboratory or in the field. It has only recently been realized that, generally speaking, this is due to objective reasons rather than to an incorrect application of the instruments. Speaking of claimed and actual status of NDA performances might be in this sense misleading; one should rather say: performances in different conditions. This paper provides support for this assumption

Integrating geophysics and hydrology for reducing the uncertainty of groundwater model predictions and improved prediction performance

DEFF Research Database (Denmark)

Christensen, Nikolaj Kruse; Christensen, Steen; Ferre, Ty

the integration of geophysical data in the construction of a groundwater model increases the prediction performance. We suggest that modelers should perform a hydrogeophysical “test-bench” analysis of the likely value of geophysics data for improving groundwater model prediction performance before actually...... and the resulting predictions can be compared with predictions from the ‘true’ model. By performing this analysis we expect to give the modeler insight into how the uncertainty of model-based prediction can be reduced.......A major purpose of groundwater modeling is to help decision-makers in efforts to manage the natural environment. Increasingly, it is recognized that both the predictions of interest and their associated uncertainties should be quantified to support robust decision making. In particular, decision...

Improving the performance of high-energy physics analysis through bitmap indices

CERN Document Server

Stockinger, K; Hoschek, W; Schikuta, E

2000-01-01

Bitmap indices are popular multi-dimensional data structures for accessing read-mostly data such as data warehouse (DW) applications, decision support systems (DSS) and online analytical processing (OLAP). One of their main strengths is that they provide good performance characteristics for complex adhoc queries and an efficient combination of multiple index dimensions in one query. Considerable research work has been done in the area of finite (and low) attribute cardinalities. However, additional complexity is imposed on the design of bitmap indices for high cardinality or even non-discrete attributes, where different optimisation techniques than the ones proposed so far have to be applied. We discuss the design and implementation of bitmap indices for high-energy physics (HEP) analysis, where the potential search space consists of hundreds of independent dimensions. A single HEP query typically covers 10 to 100 dimensions out of the whole search space. In this context we evaluated two different bitmap enco...

Relationship between sustainable development initiatives and improved company financial performance: A South African perspective

Directory of Open Access Journals (Sweden)

Darelle Groenewald

2016-05-01

Research purpose: The study analysed the relationship between sustainability performance and FP in South African listed companies. Motivation for the study: Some South African listed companies acknowledge in their sustainability reports that there is a link between sustainability development and long-term shareholder value. This implies that FP is linked to sustainable development performance. This relationship has not been researched for South African listed companies and therefore needs to be investigated. Research design, approach and method: A similar research method was used as for an international study. Forty-five listed South African companies were selected as the sample. Their sustainable development reports were used for analysis. Data were analysed with the use of content and a canonical correlation analysis. Main findings: The results of the study revealed that an overall positive relationship exists between sustainability performance and FP. Practical implications: South African companies that have a high involvement and focus on specific sustainable development initiatives that are integrated into overall sustainable development strategy can deliver improved FP for the organisation and deliver long-term value to its shareholders. Contribution: Six sustainable development aspects were found to be significantly correlated with improved FP and if incorporated into a company’s sustainable development strategy can lead to increased successes.

Performances and improvement of copper-hydrazine complexation deoxidising resin

International Nuclear Information System (INIS)

Liu Fenfen; Zhang Hao; Sun Haijun; Liu Xiaojie

2012-01-01

Copper-hydrazine complexation deoxidising resin is tested to examine its performances including effluent water quality and capacity of deoxidisation. By the means of changing the resin type and regeneration, the deoxidising capacity of the resin can be improved to 13 times more than before. At the same time, physical performances of the resin are also greatly improved while maintaining its velocity of deoxidisation and effluent quality. (authors)

Recent technology on steam turbine performance improvement

International Nuclear Information System (INIS)

Hirada, M.; Watanabe, E.; Tashiro, H.

1991-01-01

Continuous efforts have been made to improve turbine efficiency by applying the latest aerodynamic technologies to meet the energy saving requirement. In recent years, there has been considerable improvement in the field of computational fluid dynamics and these new technologies have been applied to the new blade design for HP, IP and LP turbines. Experimental verification for the new blade in turbine tests has established the overall turbine performance improvement and the excellent correspondence of flow pattern to the predicted value. This paper introduces the latest design technologies for the newly developed high efficiency blade and the verification test results

A Shot Number Based Approach to Performance Analysis in Table Tennis

Directory of Open Access Journals (Sweden)

Tamaki Sho

2017-01-01

Full Text Available The current study proposes a novel approach that improves the conventional performance analysis in table tennis by introducing the concept of frequency, or the number of shots, of each shot number. The improvements over the conventional method are as follows: better accuracy of the evaluation of skills and tactics of players, additional insights into scoring and returning skills and ease of understanding the results with a single criterion. The performance analysis of matches played at the 2012 Summer Olympics in London was conducted using the proposed method. The results showed some effects of the shot number and gender differences in table tennis. Furthermore, comparisons were made between Chinese players and players from other countries, what threw light on the skills and tactics of the Chinese players. The present findings demonstrate that the proposed method provides useful information and has some advantages over the conventional method.

The improvement of environmental performances by applying ISO 14001 standard: A case study

Directory of Open Access Journals (Sweden)

Živković Snežana

2013-01-01

Full Text Available This paper presents the analysis of the advantages of applying ISO 14001 system in an environmental protection management system. The environmental protection management system which is not licensed, i.e., compatible with the principles and standard pre-conditions considerably increases the plausibility for ecological risk. There are some issues that remain to be solved in the areas which are not expressed by financial values only but also have a non-financial character with the aim of expanding markets, company image improvement and improvement of the environmental performance indicators. By improving a company’s environmental management system efficiency we expect to achieve the minimization and elimination of damaging influences on the environment which are the consequence of company’s activities. A case study in the Oil Refinery Belgrade (RNB analyses the implementation of the standard ISO 14001:2004 into its environment protection management system, particularly emphasizing the company’s own way of evaluating the environment aspects with the aim of establishing results of ecological performances indicators improvement. The average values of the first ecological indicator of the plant, the total amount of the waste waters in m3 per a ton of product, clearly show the downturn trend, which is confirmed by the proportional reduction of the second ecological plant indicator, that is by the flocculants consumption (Al2(SO43, Na2CO3 in kg per m3 of the waste water of the Oil Refinery of Belgrade for the given period 2008-2010. Case study RNB confirms the improvement of environmental performances using the ISO 14001 standard.

Improvement of Binary Analysis Components in Automated Malware Analysis Framework

Science.gov (United States)

2017-02-21

AFRL-AFOSR-JP-TR-2017-0018 Improvement of Binary Analysis Components in Automated Malware Analysis Framework Keiji Takeda KEIO UNIVERSITY Final...TYPE Final 3. DATES COVERED (From - To) 26 May 2015 to 25 Nov 2016 4. TITLE AND SUBTITLE Improvement of Binary Analysis Components in Automated Malware ...analyze malicious software ( malware ) with minimum human interaction. The system autonomously analyze malware samples by analyzing malware binary program

Improving primary health care facility performance in Ghana: efficiency analysis and fiscal space implications.

Science.gov (United States)

Novignon, Jacob; Nonvignon, Justice

2017-06-12

Health centers in Ghana play an important role in health care delivery especially in deprived communities. They usually serve as the first line of service and meet basic health care needs. Unfortunately, these facilities are faced with inadequate resources. While health policy makers seek to increase resources committed to primary healthcare, it is important to understand the nature of inefficiencies that exist in these facilities. Therefore, the objectives of this study are threefold; (i) estimate efficiency among primary health facilities (health centers), (ii) examine the potential fiscal space from improved efficiency and (iii) investigate the efficiency disparities in public and private facilities. Data was from the 2015 Access Bottlenecks, Cost and Equity (ABCE) project conducted by the Institute for Health Metrics and Evaluation. The Stochastic Frontier Analysis (SFA) was used to estimate efficiency of health facilities. Efficiency scores were then used to compute potential savings from improved efficiency. Outpatient visits was used as output while number of personnel, hospital beds, expenditure on other capital items and administration were used as inputs. Disparities in efficiency between public and private facilities was estimated using the Nopo matching decomposition procedure. Average efficiency score across all health centers included in the sample was estimated to be 0.51. Also, average efficiency was estimated to be about 0.65 and 0.50 for private and public facilities, respectively. Significant disparities in efficiency were identified across the various administrative regions. With regards to potential fiscal space, we found that, on average, facilities could save about GH₵11,450.70 (US$7633.80) if efficiency was improved. We also found that fiscal space from efficiency gains varies across rural/urban as well as private/public facilities, if best practices are followed. The matching decomposition showed an efficiency gap of 0.29 between private

Confirmation test on confinement performance of improved glove box

International Nuclear Information System (INIS)

Miura, S.; Kanazawa, J.; Nakajima, M.; Sakuno, K.; Miyata, H.

1995-01-01

Glove boxes are used at nuclear facilities to confine radioactive materials by ensuring a high level of airtightness and negative internal pressure. The allowable rate of air leakage is 0.1% vol/hr or less at the pre-service inspection. The negative pressure value is normally maintained at about -30 mm H 2 O. Structural strength and confinement reliability of glove boxes during earthquake are major concerns, and most important glove boxes are designed to withstand seismic class A events is Japan. This paper describes vibration tests done to confirm that improve large-sized glove boxes maintain their confinement performance and structural strength even during earthquake and that the design analysis methods used are appropriate. (author). 1 ref., 6 figs., 3 tabs

Carbohydrate ingestion improves performance of a new reliable test of soccer performance.

Science.gov (United States)

Currell, Kevin; Conway, Steve; Jeukendrup, Asker E

2009-02-01

The aim of the study was to investigate the reliability of a new test of soccer performance and evaluate the effect of carbohydrate (CHO) on soccer performance. Eleven university footballers were recruited and underwent 3 trials in a randomized order. Two of the trials involved ingesting a placebo beverage, and the other, a 7.5% maltodextrin solution. The protocol comprised a series of ten 6-min exercise blocks on an outdoor Astroturf pitch, separated by the performance of 2 of the 4 soccer-specific tests, making the protocol 90 min in duration. The intensity of the exercise was designed to be similar to the typical activity pattern during soccer match play. Participants performed skill tests of dribbling, agility, heading, and shooting throughout the protocol. The coefficients of variation for dribbling, agility, heading, and shooting were 2.2%, 1.2%, 7.0%, and 2.8%, respectively. The mean combined placebo scores were 42.4 +/- 2.7 s, 43.1 +/- 3.7 s, 210 +/- 34 cm, and 212 +/- 17 points for agility, dribbling, heading, and kicking, respectively. CHO ingestion led to a combined agility time of 41.5 +/- 0.8 s, for dribbling 41.7 +/- 3.5 s, 213 +/- 11 cm for heading, and 220 +/- 5 points for kicking accuracy. There was a significant improvement in performance for dribbling, agility, and shooting (p soccer performance, and ingesting CHO leads to an improvement in soccer performance.

Performance improvement of a cross-flow hydro turbine by air layer effect

International Nuclear Information System (INIS)

Choi, Y D; Yoon, H Y; Inagaki, M; Ooike, S; Kim, Y J; Lee, Y H

2010-01-01

The purpose of this study is not only to investigate the effects of air layer in the turbine chamber on the performance and internal flow of the cross-flow turbine, but also to suggest a newly developed air supply method. Field test is performed in order to measure the output power of the turbine by a new air supply method. CFD analysis on the performance and internal flow of the turbine is conducted by an unsteady state calculation using a two-phase flow model in order to embody the air layer effect on the turbine performance effectively.The result shows that air layer effect on the performance of the turbine is considerable. The air layer located in the turbine runner passage plays the role of preventing a shock loss at the runner axis and suppressing a recirculation flow in the runner. The location of air suction hole on the chamber wall is very important factor for the performance improvement. Moreover, the ratio between air from suction pipe and water from turbine inlet is also significant factor of the turbine performance.

Strength Training for Middle- and Long-Distance Performance: A Meta-Analysis.

Science.gov (United States)

Berryman, Nicolas; Mujika, Inigo; Arvisais, Denis; Roubeix, Marie; Binet, Carl; Bosquet, Laurent

2018-01-01

To assess the net effects of strength training on middle- and long-distance performance through a meta-analysis of the available literature. Three databases were searched, from which 28 of 554 potential studies met all inclusion criteria. Standardized mean differences (SMDs) were calculated and weighted by the inverse of variance to calculate an overall effect and its 95% confidence interval (CI). Subgroup analyses were conducted to determine whether the strength-training intensity, duration, and frequency and population performance level, age, sex, and sport were outcomes that might influence the magnitude of the effect. The implementation of a strength-training mesocycle in running, cycling, cross-country skiing, and swimming was associated with moderate improvements in middle- and long-distance performance (net SMD [95%CI] = 0.52 [0.33-0.70]). These results were associated with improvements in the energy cost of locomotion (0.65 [0.32-0.98]), maximal force (0.99 [0.80-1.18]), and maximal power (0.50 [0.34-0.67]). Maximal-force training led to greater improvements than other intensities. Subgroup analyses also revealed that beneficial effects on performance were consistent irrespective of the athletes' level. Taken together, these results provide a framework that supports the implementation of strength training in addition to traditional sport-specific training to improve middle- and long-distance performance, mainly through improvements in the energy cost of locomotion, maximal power, and maximal strength.

HUMAN RESOURCES EMPOWERMENT, WORKING MOTIVATION AND ORGANIZATION CHANGE IN IMPROVING HOTEL BUSINESS PERFORMANCE IN BALI

Directory of Open Access Journals (Sweden)

Gusti Kade Sutawa

2016-03-01

Full Text Available This study aims to test and analyze impact of human resource development on working motivation of hotel business workers in Bali, impact of human resource development on organizational changes of hotel business in Bali, impact of human resource development on the performance of hotel business in Bali, impact of working motivation against organizational changes in hotel business in Bali, impact of working motivation on the organizations performance of the hotel business in Bali, and impact of organizational changes against organizations performance of the hotel business in Bali. There were 170 respondents of star-rated hotel employees which were selected through purposive sampling technique. Structural Equation Modeling with the application Analysis of Moment Structure was used to analyze the data. The results show that empowerment of human resources (HR has positive and significant impact on working motivation, organizational changes, and the organization performance of hotel business in Bali, working motivation has positive and significant impact on organizational changes and the organization performance of hotel business in Bali and organizational changes have significant and positive impact on the organization performance of hotel business in Bali. Empowerment variables have the most powerful impact to support the improvement of organizational performance, followed by organizational changes and working motivation variables. The results indicate that human resource empowerment improves the performance of the hotel business in Bali. Therefore, human resource development need to be prioritized in order to improve organizational performance of star hotels in Bali.

Teacher Evaluation: Organizational Maintenance Versus Stimulation of Improved Teaching Performance. The New Mexico Principalship Study.

Science.gov (United States)

Wood, Carolyn J.; Pohland, Paul A.

Teacher evaluation procedures appear to focus on organizational maintenance aspects more heavily than on helping teachers improve their teaching performance. This conclusion was reached after a content analysis of teacher evaluation instruments used in New Mexico schools. Items focusing on the instructional role constituted only 28% of the items…

Purchasing to improve health systems performance

National Research Council Canada - National Science Library

Robinson, Ray; Jakubowski, Elke; Figueras, Josep

2005-01-01

... as they formulate purchasing strategies so that they can increase effectiveness and improve performance in their own national context An assessment of the intersecting roles of citizens, the government and the providers * * * Written by leading health policy analysts, this book is essential reading for health policy makers, planners and managers as well as resear...

Quantitative analysis of the security performance in wireless LANs

Directory of Open Access Journals (Sweden)

Poonam Jindal

2017-07-01

Full Text Available A comprehensive experimental study to analyze the security performance of a WLAN based on IEEE 802.11 b/g/n standards in various network scenarios is presented in this paper. By setting-up an experimental testbed we have measured results for a layered security model in terms of throughput, response time, encryption overheads, frame loss and jitter. Through numerical results obtained from the testbed, we have presented quantitative as well as realistic findings for both security mechanisms and network performance. It establishes the fact that there is always a tradeoff between the security strength and the associated network performance. It is observed that the non-roaming network always performs better than the roaming network under all network scenarios. To analyze the benefits offered by a particular security protocol a relative security strength index model is demonstrated. Further we have presented the statistical analysis of our experimental data. We found that different security protocols have different robustness against mobility. By choosing the robust security protocol, network performance can be improved. The presented analysis is significant and useful with reference to the assessment of the suitability of security protocols for given real time application.

Tapped density optimisation for four agricultural wastes - Part II: Performance analysis and Taguchi-Pareto

Directory of Open Access Journals (Sweden)

Ajibade Oluwaseyi Ayodele

2016-01-01

Full Text Available In this attempt, which is a second part of discussions on tapped density optimisation for four agricultural wastes (particles of coconut, periwinkle, palm kernel and egg shells, performance analysis for comparative basis is made. This paper pioneers a study direction in which optimisation of process variables are pursued using Taguchi method integrated with the Pareto 80-20 rule. Negative percentage improvements resulted when the optimal tapped density was compared with the average tapped density. However, the performance analysis between optimal tapped density and the peak tapped density values yielded positive percentage improvements for the four filler particles. The performance analysis results validate the effectiveness of using the Taguchi method in improving the tapped density properties of the filler particles. The application of the Pareto 80-20 rule to the table of parameters and levels produced revised tables of parameters and levels which helped to identify the factor-levels position of each parameter that is economical to optimality. The Pareto 80-20 rule also produced revised S/N response tables which were used to know the relevant S/N ratios that are relevant to optimality.

Improving the Performance of the Extreme-scale Simulator

Energy Technology Data Exchange (ETDEWEB)

Engelmann, Christian [ORNL; Naughton III, Thomas J [ORNL

2014-01-01

Investigating the performance of parallel applications at scale on future high-performance computing (HPC) architectures and the performance impact of different architecture choices is an important component of HPC hardware/software co-design. The Extreme-scale Simulator (xSim) is a simulation-based toolkit for investigating the performance of parallel applications at scale. xSim scales to millions of simulated Message Passing Interface (MPI) processes. The overhead introduced by a simulation tool is an important performance and productivity aspect. This paper documents two improvements to xSim: (1) a new deadlock resolution protocol to reduce the parallel discrete event simulation management overhead and (2) a new simulated MPI message matching algorithm to reduce the oversubscription management overhead. The results clearly show a significant performance improvement, such as by reducing the simulation overhead for running the NAS Parallel Benchmark suite inside the simulator from 1,020\\% to 238% for the conjugate gradient (CG) benchmark and from 102% to 0% for the embarrassingly parallel (EP) and benchmark, as well as, from 37,511% to 13,808% for CG and from 3,332% to 204% for EP with accurate process failure simulation.

Photovoltaic thermal module concepts and their performance analysis: A review

International Nuclear Information System (INIS)

Hasan, M. Arif; Sumathy, K.

2010-01-01

This paper presents a review of the available literature covering the latest module aspects of different photovoltaic/thermal (PV/T) collectors and their performances in terms of electrical as well as thermal output. The review covers detailed description of flat-plate and concentrating PV/T systems, using liquid or air as the working fluid, numerical model analysis, experimental work and qualitative evaluation of thermal and electrical output. Also an in-depth review on the performance parameters such as, optimum mass flow rate, PV/T dimensions, air channel geometry is presented in this study. Based on the thorough review, it is clear that PV/T modules are very promising devices and there exists lot of scope to further improve their performances. Appropriate recommendations are made which will aid PV/T systems to improve their efficiency and reducing their cost, making them more competitive in the present market. (author)

Photovoltaic thermal module concepts and their performance analysis: A review

Energy Technology Data Exchange (ETDEWEB)

Hasan, M. Arif; Sumathy, K. [Department of Mechanical Engineering, North Dakota State University, Fargo, ND (United States)

2010-09-15

This paper presents a review of the available literature covering the latest module aspects of different photovoltaic/thermal (PV/T) collectors and their performances in terms of electrical as well as thermal output. The review covers detailed description of flat-plate and concentrating PV/T systems, using liquid or air as the working fluid, numerical model analysis, experimental work and qualitative evaluation of thermal and electrical output. Also an in-depth review on the performance parameters such as, optimum mass flow rate, PV/T dimensions, air channel geometry is presented in this study. Based on the thorough review, it is clear that PV/T modules are very promising devices and there exists lot of scope to further improve their performances. Appropriate recommendations are made which will aid PV/T systems to improve their efficiency and reducing their cost, making them more competitive in the present market. (author)

Linnorm: improved statistical analysis for single cell RNA-seq expression data.

Science.gov (United States)

Yip, Shun H; Wang, Panwen; Kocher, Jean-Pierre A; Sham, Pak Chung; Wang, Junwen

2017-12-15

Linnorm is a novel normalization and transformation method for the analysis of single cell RNA sequencing (scRNA-seq) data. Linnorm is developed to remove technical noises and simultaneously preserve biological variations in scRNA-seq data, such that existing statistical methods can be improved. Using real scRNA-seq data, we compared Linnorm with existing normalization methods, including NODES, SAMstrt, SCnorm, scran, DESeq and TMM. Linnorm shows advantages in speed, technical noise removal and preservation of cell heterogeneity, which can improve existing methods in the discovery of novel subtypes, pseudo-temporal ordering of cells, clustering analysis, etc. Linnorm also performs better than existing DEG analysis methods, including BASiCS, NODES, SAMstrt, Seurat and DESeq2, in false positive rate control and accuracy. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

Clinical laboratory as an economic model for business performance analysis

Science.gov (United States)

Buljanović, Vikica; Patajac, Hrvoje; Petrovečki, Mladen

2011-01-01

Aim To perform SWOT (strengths, weaknesses, opportunities, and threats) analysis of a clinical laboratory as an economic model that may be used to improve business performance of laboratories by removing weaknesses, minimizing threats, and using external opportunities and internal strengths. Methods Impact of possible threats to and weaknesses of the Clinical Laboratory at Našice General County Hospital business performance and use of strengths and opportunities to improve operating profit were simulated using models created on the basis of SWOT analysis results. The operating profit as a measure of profitability of the clinical laboratory was defined as total revenue minus total expenses and presented using a profit and loss account. Changes in the input parameters in the profit and loss account for 2008 were determined using opportunities and potential threats, and economic sensitivity analysis was made by using changes in the key parameters. The profit and loss account and economic sensitivity analysis were tools for quantifying the impact of changes in the revenues and expenses on the business operations of clinical laboratory. Results Results of simulation models showed that operational profit of €470 723 in 2008 could be reduced to only €21 542 if all possible threats became a reality and current weaknesses remained the same. Also, operational gain could be increased to €535 804 if laboratory strengths and opportunities were utilized. If both the opportunities and threats became a reality, the operational profit would decrease by €384 465. Conclusion The operational profit of the clinical laboratory could be significantly reduced if all threats became a reality and the current weaknesses remained the same. The operational profit could be increased by utilizing strengths and opportunities as much as possible. This type of modeling may be used to monitor business operations of any clinical laboratory and improve its financial situation by

Two-stage process analysis using the process-based performance measurement framework and business process simulation

NARCIS (Netherlands)

Han, K.H.; Kang, J.G.; Song, M.S.

2009-01-01

Many enterprises have recently been pursuing process innovation or improvement to attain their performance goals. To align a business process with enterprise performances, this study proposes a two-stage process analysis for process (re)design that combines the process-based performance measurement

How Improve Operational Research Learning? A Performance Analysis of Business Administration and Accounting Students

Directory of Open Access Journals (Sweden)

Cesar Duarte Souto-Maior

2014-12-01

Full Text Available This paper analyses factors that can affect Business Administration and Accounting students’ performance in Operational Research course. To accomplish this, were analyzed de final grade of 556 undergraduate students. The hypotheses of research were analyzed using two-tailed t test. The result confirms most of the hypotheses, however two of them were not significant. The results show that female students perform better than male students; better classified students on application process have higher scores, as well as students who do the course in the morning and students who have more colleagues from the original group. We also found a negative correlation between absence and final grade. However, the major (Business Administration or Accounting and the class size were not significant. The correlation between independent variables show that female students present less absence than male. Also the absences are related with bigger classes and less colleagues form original group. Having more colleagues of the original group can encourage the student to go to class. These findings could be important for teachers and educational institutions during development of new strategies and learning methods, as well as for students planning new forms to improve their own performance. Moreover, these results also contribute to the discussion of important issues, providing background and arguments for further research.

Experience of safety and performance improvement for fuel handling equipment

International Nuclear Information System (INIS)

Gyoon Chang, Sang; Hee Lee, Dae

2014-01-01

The purpose of this study is to provide experience of safety and performance improvement of fuel handling equipment for nuclear power plants in Korea. The fuel handling equipment, which is used as an important part of critical processes during the refueling outage, has been improved to enhance safety and to optimize fuel handling procedures. Results of data measured during the fuel reloading are incorporated into design changes. The safety and performance improvement for fuel handling equipment could be achieved by simply modifying the components and improving the interlock system. The experience provided in this study can be useful lessons for further improvement of the fuel handling equipment. (authors)

Quality initiatives: lean approach to improving performance and efficiency in a radiology department.

Science.gov (United States)

Kruskal, Jonathan B; Reedy, Allen; Pascal, Laurie; Rosen, Max P; Boiselle, Phillip M

2012-01-01

Many hospital radiology departments are adopting "lean" methods developed in automobile manufacturing to improve operational efficiency, eliminate waste, and optimize the value of their services. The lean approach, which emphasizes process analysis, has particular relevance to radiology departments, which depend on a smooth flow of patients and uninterrupted equipment function for efficient operation. However, the application of lean methods to isolated problems is not likely to improve overall efficiency or to produce a sustained improvement. Instead, the authors recommend a gradual but continuous and comprehensive "lean transformation" of work philosophy and workplace culture. Fundamental principles that must consistently be put into action to achieve such a transformation include equal involvement of and equal respect for all staff members, elimination of waste, standardization of work processes, improvement of flow in all processes, use of visual cues to communicate and inform, and use of specific tools to perform targeted data collection and analysis and to implement and guide change. Many categories of lean tools are available to facilitate these tasks: value stream mapping for visualizing the current state of a process and identifying activities that add no value; root cause analysis for determining the fundamental cause of a problem; team charters for planning, guiding, and communicating about change in a specific process; management dashboards for monitoring real-time developments; and a balanced scorecard for strategic oversight and planning in the areas of finance, customer service, internal operations, and staff development. © RSNA, 2012.

A conceptual model to improve performance in virtual teams

Directory of Open Access Journals (Sweden)

Shopee Dube

2016-09-01

Full Text Available Background: The vast improvement in communication technologies and sophisticated project management tools, methods and techniques has allowed geographically and culturally diverse groups to operate and function in a virtual environment. To succeed in this virtual environment where time and space are becoming increasingly irrelevant, organisations must define new ways of implementing initiatives. This virtual environment phenomenon has brought about the formation of virtual project teams that allow organisations to harness the skills and knowhow of the best resources, irrespective of their location. Objectives: The aim of this article was to investigate performance criteria and develop a conceptual model which can be applied to enhance the success of virtual project teams. There are no clear guidelines of the performance criteria in managing virtual project teams. Method: A qualitative research methodology was used in this article. The purpose of content analysis was to explore the literature to understand the concept of performance in virtual project teams and to summarise the findings of the literature reviewed. Results: The research identified a set of performance criteria for the virtual project teams as follows: leadership, trust, communication, team cooperation, reliability, motivation, comfort and social interaction. These were used to conceptualise the model. Conclusion: The conceptual model can be used in a holistic way to determine the overall performance of the virtual project team, but each factor can be analysed individually to determine the impact on the overall performance. The knowledge of performance criteria for virtual project teams could aid project managers in enhancing the success of these teams and taking a different approach to better manage and coordinate them.

Improved metamodel-based importance sampling for the performance assessment of radioactive waste repositories

International Nuclear Information System (INIS)

Cadini, F.; Gioletta, A.; Zio, E.

2015-01-01

In the context of a probabilistic performance assessment of a radioactive waste repository, the estimation of the probability of exceeding the dose threshold set by a regulatory body is a fundamental task. This may become difficult when the probabilities involved are very small, since the classically used sampling-based Monte Carlo methods may become computationally impractical. This issue is further complicated by the fact that the computer codes typically adopted in this context requires large computational efforts, both in terms of time and memory. This work proposes an original use of a Monte Carlo-based algorithm for (small) failure probability estimation in the context of the performance assessment of a near surface radioactive waste repository. The algorithm, developed within the context of structural reliability, makes use of an estimated optimal importance density and a surrogate, kriging-based metamodel approximating the system response. On the basis of an accurate analytic analysis of the algorithm, a modification is proposed which allows further reducing the computational efforts by a more effective training of the metamodel. - Highlights: • We tackle uncertainty propagation in a radwaste repository performance assessment. • We improve a kriging-based importance sampling for estimating failure probabilities. • We justify the modification by an analytic, comparative analysis of the algorithms. • The probability of exceeding dose thresholds in radwaste repositories is estimated. • The algorithm is further improved reducing the number of its free parameters

Does Multiple Intelligence Improve Performance? Evidence from a ...

African Journals Online (AJOL)

This study reports the findings of a study that investigated the relationship between multiple intelligence (MI) and academic performance in higher education. It addresses one question: does MI improve academic performance? Taking the case of the finalist cohort of the university's Faculty of Education of the academic year ...

Sensitivity Analysis of FEAST-Metal Fuel Performance Code: Initial Results

International Nuclear Information System (INIS)

Edelmann, Paul Guy; Williams, Brian J.; Unal, Cetin; Yacout, Abdellatif

2012-01-01

This memo documents the completion of the LANL milestone, M3FT-12LA0202041, describing methodologies and initial results using FEAST-Metal. The FEAST-Metal code calculations for this work are being conducted at LANL in support of on-going activities related to sensitivity analysis of fuel performance codes. The objective is to identify important macroscopic parameters of interest to modeling and simulation of metallic fuel performance. This report summarizes our preliminary results for the sensitivity analysis using 6 calibration datasets for metallic fuel developed at ANL for EBR-II experiments. Sensitivity ranking methodology was deployed to narrow down the selected parameters for the current study. There are approximately 84 calibration parameters in the FEAST-Metal code, of which 32 were ultimately used in Phase II of this study. Preliminary results of this sensitivity analysis led to the following ranking of FEAST models for future calibration and improvements: fuel conductivity, fission gas transport/release, fuel creep, and precipitation kinetics. More validation data is needed to validate calibrated parameter distributions for future uncertainty quantification studies with FEAST-Metal. Results of this study also served to point out some code deficiencies and possible errors, and these are being investigated in order to determine root causes and to improve upon the existing code models.

Performance analysis of a Miller cycle engine by an indirect analysis method with sparking and knock in consideration

International Nuclear Information System (INIS)

Wang, Yuanfeng; Zu, Bingfeng; Xu, Yuliang; Wang, Zhen; Liu, Jie

2016-01-01

Highlights: • A quasi-dimensional model was adopted to study Miller cycle engine’s performance. • A new indirect performance analysis method was proposed. • The definition of effective compression ratio was modified. • The modified effective compression ratio takes the trapped mixture mass in account. • The factors limiting the fuel economy in Miller cycle engine were found out. - Abstract: In this paper, a full-factorial design of experiment was applied to thoroughly investigate the effects of compression ratio, intake valve closing retardation angle, and engine speed on the fuel consumption performance and power performance of the Miller cycle engine based on a quasi-dimensional simulation model. A new indirect analysis method based on formula derivation and main effect analysis was proposed to simplify the complex relationship between the design factors and the performance parameters. The definition of effective compression ratio was modified to take account of the actual mass of mixture trapped in the cylinder. The results show that the distributions of brake mean effective pressure and brake specific fuel consumption can be regarded as the re-organization results from the distributions of volumetric efficiency and indicated efficiency. The intake valve closing retardation angle has a strong negative correlation with volumetric efficiency. The modified effective compression ratio is the approximate product of the compression ratio and the volumetric efficiency, and makes obvious effects on the distribution of the indicated efficiency. Therefore the combustion process is co-evolved with the intake process in a Miller cycle engine. The further improvement of brake specific fuel consumption is mainly limited by four factors, i.e., the back flow loss, the exergy loss, the incomplete expansion loss, and the combustion loss. The improvement of fuel consumption performance is at a cost of power performance, and the trade-off between the both essentially

Use of progesterone radioimmunoassay techniques for improving reproduction performances in dary cattles

International Nuclear Information System (INIS)

Benyoucef, M.T.; Benabdelaziz, A.; Khelili, R.

1990-07-01

This report deals with the first measurements of progesterone, by radioimmunoassay (P4-PIA) in blood samples, to assess fertility in livestock (cattle) in Algeria, by improvement of the level of reproduction management. For this purpose, the results obtained throughout first analysis of P4 on a sample of 15 bovines females, composed by 12 heifers and 3 cows confirm the efficiency of the techniques in improving dary cattle reproduction performances. Ovarian activity can be determined for cows at the moment of post partum and for heifers before breeding as well as, pregnancy confirmation on breeding heifers. It is interesting to extend the experiments using these techniques to a higher number of livestocks (breeds and species) and to develop new research subjects in this field

TENDENCY OF IMPROVEMENT ANALYSIS OF VENTURE ACTIVITY FOR MANAGEMENT DECISIONS

Directory of Open Access Journals (Sweden)

G.Yu. Iakovetс

2015-03-01

Full Text Available The questions concerning the definition of current trends and prospects of venture financing new innovative enterprises as one of the most effective and alternative, but with a high degree of risk financing sources of the entity. The features of venture financing that is different from other sources of business financing, as well as income from investments of venture capital can greatly exceed the volume of investments, but at the same time such financing risks are significant, so it all makes it necessary to build an effective system of venture capital investments in the workplace. In the course of the study also revealed problems of analysis and minimization of risks in the performance of venture financing of innovative enterprises. Defining characteristics analysis and risk assessment of venture financing helps to find ways to minimize and systematization, avoidance and prevention of risks in the performance of venture capital. The study also identified the major areas of improvement analysis of venture capital for management decisions.

Investing in improved performance of national tuberculosis programs reduces the tuberculosis burden: analysis of 22 high-burden countries, 2002-2009.

Science.gov (United States)

Akachi, Yoko; Zumla, Alimuddin; Atun, Rifat

2012-05-15

To assess the impact of investment in national tuberculosis programs (NTPs) on NTP performance and tuberculosis burden in 22 high-burden countries, as determined by the World Health Organization (WHO). Estimates of annual tuberculosis burden and NTP performance indicators and control variables during 2002-2009 were obtained from the Organization for Economic Cooperation and Development, the WHO, the World Bank, and the Penn World Table for the 22 high-burden countries. Panel data analysis was performed using the outcome variables tuberculosis incidence, prevalence, and mortality and the key explanatory variables Partnership case detection rate and treatment success rate, controlling for gross domestic product per capita, population structure, and human immunodeficiency virus (HIV) prevalence. A $1 per capita (general population) higher NTP budget (including domestic and external sources) was associated with a 1.9% (95% confidence interval, .12%-3.6%) higher estimated case detection rate the following year for the 22 high-burden countries between 2002 and 2009. In the final models, which corrected for autocorrelation and heteroskedasticity, achieving the STOP TB Partnership case detection rate target of >70% was associated with significantly (P < .01) lower tuberculosis incidence, prevalence, and mortality the following year, even when controlling for general economic development and HIV prevalence as potential confounding variables. Increased investment in NTPs was significantly associated with improved performance and with a downward trend in the tuberculosis burden in the 22 high-burden countries during 2002-2009.

Performance Analysis of Receive Diversity in Wireless Sensor Networks over GBSBE Models

Science.gov (United States)

Goel, Shivali; Abawajy, Jemal H.; Kim, Tai-hoon

2010-01-01

Wireless sensor networks have attracted a lot of attention recently. In this paper, we develop a channel model based on the elliptical model for multipath components involving randomly placed scatterers in the scattering region with sensors deployed on a field. We verify that in a sensor network, the use of receive diversity techniques improves the performance of the system. Extensive performance analysis of the system is carried out for both single and multiple antennas with the applied receive diversity techniques. Performance analyses based on variations in receiver height, maximum multipath delay and transmit power have been performed considering different numbers of antenna elements present in the receiver array, Our results show that increasing the number of antenna elements for a wireless sensor network does indeed improve the BER rates that can be obtained. PMID:22163510

Performance and safety analysis of WP-cave concept

International Nuclear Information System (INIS)

Skagius, K.; Svemar, C.

1989-08-01

The report presents a performance safety, and cost analysis of the WP-cave, WPC, concept. In the performance analysis, questions specific to the WPC have been addressed which have been identified to require more detailed studies. Based on the outcome of this analysis, a safety analysis has been made which comprises of the modeling and calculation of radionuclide transport from the repository to the biosphere and the resulting dose exposure to man. The result of the safety analysis indicates that the present design of a WPC repository may give unacceptably high doses. By improving the properties of the bentonite/sand barrier such that the hydraulic conductivity is reduced, or by changing the short-lived steel canisters to more long-lived canisters, e.g. copper canisters, it is judged possible to achieve a sufficiently low level of dose exposure rates to man. The cost for a WPC repository of the studied design is significantly higher than for a KBS-3 repository considering the Swedish conditions and the Swedish amount of spent fuel. The major costs are connected to the excavation and backfilling of the bentonite/sand barrier. The potential for cost savings is high but it is not judged possible to account for savings in such a way that the WPC concept shows lower cost than the KBS-3 concept. (34 figs., 33 tabs., 29 refs.)

Plotting performance improvement progress through the development of a trauma dashboard.

Science.gov (United States)

Hochstuhl, Diane C; Elwell, Sean

2014-01-01

Performance improvement processes are the core of a pediatric trauma program. The ability to identify, resolve, and trend specific indicators related to patient care and to show effective loop closure can be especially challenging. Using the hospital's overall quality process as a template, the trauma program built its own electronic dashboard. Our maturing trauma PI program now guides the overall trauma care. All departments own at least one performance indicator and must provide action plans for improvement. Utilization of an electronic dashboard for trauma performance improvement has provided a highly visible scorecard, which highlights successes and tracks areas needing improvement.

Variable geometry gas turbines for improving the part-load performance of marine combined cycles - Combined cycle performance

DEFF Research Database (Denmark)

Haglind, Fredrik

2011-01-01

The part-load performance of combined cycles intended for naval use is of great importance, and it is influenced by the gas turbine configuration and load control strategy. This paper is aimed at quantifying the effects of variable geometry gas turbines on the part-load efficiency for combined...... cycles used for ship propulsion. Moreover, the paper is aimed at developing methodologies and deriving models for part-load simulations suitable for energy system analysis of various components within combined cycle power plants. Two different gas turbine configurations are studied, a two-shaft aero......-derivative configuration and a single-shaft industrial configuration. The results suggest that by the use of variable geometry gas turbines, the combined cycle part-load performance can be improved. In order to minimise the voyage fuel consumption, a combined cycle featuring two-shaft gas turbines with VAN control...

Performance Improvement of a Centrifugal Compressor by Passive Means

Directory of Open Access Journals (Sweden)

N. Sitaram

2012-01-01

Full Text Available The present experimental investigation deals with performance improvement of a low-speed centrifugal compressor by inexpensive passive means such as turbulence generator placed at different positions and partial shroud near the rotor blade tip. The experiments are carried out at three values of tip clearance, namely 2.2%, 5.1%, and 7.9% of rotor blade height at the exit. Performance tests are carried out for a total of 13 configurations. From these measurements, partial shroud is found to give the best performance. The improvement in the compressor performance may be due to the reduction of tip leakage flows by the small extension of partial shroud (2 mm on the pressure surface side. Although there is nominal change in performance due to turbulence generator (TG, TG has beneficial effect of increased operating range.

Does Methylphenidate Improve Academic Performance? A Systematic Review and Meta‑analysis

NARCIS (Netherlands)

Kortekaas-Rijlaarsdam, Anne Fleur; Luman, Marjolein; Sonuga-Barke, Edmund; Oosterlaan, J.

2018-01-01

Academic improvement is amongst the most common treatment targets when prescribing stimulants to children with ADHD.Previous reviews on stimulant-related academic improvements are inconclusive and focus on task engagement. Recentliterature suggests outcome-domain-specific medication effects that are

Does methylphenidate improve academic performance? A systematic review and meta-analysis

NARCIS (Netherlands)

Kortekaas-Rijlaarsdam, Anne Fleur; Luman, Marjolein; Sonuga-Barke, Edmund; Oosterlaan, Jaap

2018-01-01

Academic improvement is amongst the most common treatment targets when prescribing stimulants to children with ADHD. Previous reviews on stimulant-related academic improvements are inconclusive and focus on task engagement. Recent literature suggests outcome-domain-specific medication effects that

Device Engineering Towards Improved Tin Sulfide Solar Cell Performance and Performance Reproducibility

Energy Technology Data Exchange (ETDEWEB)

Steinmann, Vera; Chakraborty, Rupak; Rekemeyer, Paul; Siol, Sebastian; Martinot, Loic; Polizzotti, Alex; Yang, Chuanxi; Hartman, Katy; Gradecak, Silvija; Zakutayev, Andriy; Gordon, Roy G.; Buonassisi, Tonio

2016-11-21

As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to rapidly test promising candidates in high-performing PV devices. There is a need to engineer new compatible device architectures, including the development of novel transparent conductive oxides and buffer layers. Here, we consider the two approaches of a substrate-style and a superstrate-style device architecture for novel thin-film solar cells. We use tin sulfide as a test absorber material. Upon device engineering, we demonstrate new approaches to improve device performance and performance reproducibility.

RTOD- RADIAL TURBINE OFF-DESIGN PERFORMANCE ANALYSIS

Science.gov (United States)

Glassman, A. J.

1994-01-01

The RTOD program was developed to accurately predict radial turbine off-design performance. The radial turbine has been used extensively in automotive turbochargers and aircraft auxiliary power units. It is now being given serious consideration for primary powerplant applications. In applications where the turbine will operate over a wide range of power settings, accurate off-design performance prediction is essential for a successful design. RTOD predictions have already illustrated a potential improvement in off-design performance offered by rotor back-sweep for high-work-factor radial turbines. RTOD can be used to analyze other potential performance enhancing design features. RTOD predicts the performance of a radial turbine (with or without rotor blade sweep) as a function of pressure ratio, speed, and stator setting. The program models the flow with the following: 1) stator viscous and trailing edge losses; 2) a vaneless space loss between the stator and the rotor; and 3) rotor incidence, viscous, trailing-edge, clearance, and disk friction losses. The stator and rotor viscous losses each represent the combined effects of profile, endwall, and secondary flow losses. The stator inlet and exit and the rotor inlet flows are modeled by a mean-line analysis, but a sector analysis is used at the rotor exit. The leakage flow through the clearance gap in a pivoting stator is also considered. User input includes gas properties, turbine geometry, and the stator and rotor viscous losses at a reference performance point. RTOD output includes predicted turbine performance over a specified operating range and any user selected flow parameters. The RTOD program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 100K of 8 bit bytes. The RTOD program was developed in 1983.

Improving the Performance of Justice Institutions

OpenAIRE

Decker, Klaus; Mohlen, Christian; Varela, David F.

2011-01-01

This paper presents a selection of experiences from Organization for Economic Cooperation and Development (OECD) countries in managing justice institutions which are the most relevant for performance improvement of their counterparts in Latin America. The scope of the paper is mostly limited to the courts, but comprises all types of courts: specialized courts as well as courts of general j...

Improvements to Integrated Tradespace Analysis of Communications Architectures (ITACA) Network Loading Analysis Tool

Science.gov (United States)

Lee, Nathaniel; Welch, Bryan W.

2018-01-01

NASA's SCENIC project aims to simplify and reduce the cost of space mission planning by replicating the analysis capabilities of commercially licensed software which are integrated with relevant analysis parameters specific to SCaN assets and SCaN supported user missions. SCENIC differs from current tools that perform similar analyses in that it 1) does not require any licensing fees, 2) will provide an all-in-one package for various analysis capabilities that normally requires add-ons or multiple tools to complete. As part of SCENIC's capabilities, the ITACA network loading analysis tool will be responsible for assessing the loading on a given network architecture and generating a network service schedule. ITACA will allow users to evaluate the quality of service of a given network architecture and determine whether or not the architecture will satisfy the mission's requirements. ITACA is currently under development, and the following improvements were made during the fall of 2017: optimization of runtime, augmentation of network asset pre-service configuration time, augmentation of Brent's method of root finding, augmentation of network asset FOV restrictions, augmentation of mission lifetimes, and the integration of a SCaN link budget calculation tool. The improvements resulted in (a) 25% reduction in runtime, (b) more accurate contact window predictions when compared to STK(Registered Trademark) contact window predictions, and (c) increased fidelity through the use of specific SCaN asset parameters.

Improved Low Temperature Performance of Supercapacitors

Science.gov (United States)

Brandon, Erik J.; West, William C.; Smart, Marshall C.; Gnanaraj, Joe

2013-01-01

Low temperature double-layer capacitor operation enabled by: - Base acetonitrile / TEATFB salt formulation - Addition of low melting point formates, esters and cyclic ethers center dot Key electrolyte design factors: - Volume of co-solvent - Concentration of salt center dot Capacity increased through higher capacity electrodes: - Zeolite templated carbons - Asymmetric cell designs center dot Continuing efforts - Improve asymmetric cell performance at low temperature - Cycle life testing Motivation center dot Benchmark performance of commercial cells center dot Approaches for designing low temperature systems - Symmetric cells (activated carbon electrodes) - Symmetric cells (zeolite templated carbon electrodes) - Asymmetric cells (lithium titanate/activated carbon electrodes) center dot Experimental results center dot Summary

Inertial Sensor Technology for Elite Swimming Performance Analysis: A Systematic Review

Science.gov (United States)

Mooney, Robert; Corley, Gavin; Godfrey, Alan; Quinlan, Leo R; ÓLaighin, Gearóid

2015-01-01

Technical evaluation of swimming performance is an essential factor of elite athletic preparation. Novel methods of analysis, incorporating body worn inertial sensors (i.e., Microelectromechanical systems, or MEMS, accelerometers and gyroscopes), have received much attention recently from both research and commercial communities as an alternative to video-based approaches. This technology may allow for improved analysis of stroke mechanics, race performance and energy expenditure, as well as real-time feedback to the coach, potentially enabling more efficient, competitive and quantitative coaching. The aim of this paper is to provide a systematic review of the literature related to the use of inertial sensors for the technical analysis of swimming performance. This paper focuses on providing an evaluation of the accuracy of different feature detection algorithms described in the literature for the analysis of different phases of swimming, specifically starts, turns and free-swimming. The consequences associated with different sensor attachment locations are also considered for both single and multiple sensor configurations. Additional information such as this should help practitioners to select the most appropriate systems and methods for extracting the key performance related parameters that are important to them for analysing their swimmers’ performance and may serve to inform both applied and research practices. PMID:26712760

Improved rate control for electron-beam evaporation and evaluation of optical performance improvements.

Science.gov (United States)

Gevelber, Michael; Xu, Bing; Smith, Douglas

2006-03-01

A new deposition-rate-control and electron-beam-gun (e-gun) strategy was developed that significantly reduces the growth-rate variations for e-beam-deposited SiO2 coatings. The resulting improvements in optical performance are evaluated for multilayer bandpass filters. The adverse effect of uneven silica-source depletion on coating spectral performances during long deposition runs is discussed.

Access Agent Improving The Performance Of Access Control Lists

Directory of Open Access Journals (Sweden)

Thelis R. S.

2015-08-01

Full Text Available The main focus of the proposed research is maintaining the security of a network. Extranet is a popular network among most of the organizations where network access is provided to a selected group of outliers. Limiting access to an extranet can be carried out using Access Control Lists ACLs method. However handling the workload of ACLs is an onerous task for the router. The purpose of the proposed research is to improve the performance and to solidify the security of the ACLs used in a small organization. Using a high performance computer as a dedicated device to share and handle the router workload is suggested in order to increase the performance of the router when handling ACLs. Methods of detecting and directing sensitive data is also discussed in this paper. A framework is provided to help increase the efficiency of the ACLs in an organization network using the above mentioned procedures thus helping the organizations ACLs performance to be improved to be more secure and the system to perform faster. Inbuilt methods of Windows platform or Software for open source platforms can be used to make a computer function as a router. Extended ACL features allow the determining of the type of packets flowing through the router. Combining these mechanisms allows the ACLs to be improved and perform in a more efficient manner.

Effectively Managing Nuclear Risk Through Human Performance Improvement

International Nuclear Information System (INIS)

Coe, Richard; Lake, Patricia

2003-01-01

The U.S. commercial nuclear industry has just completed an outstanding decade of plant performance. Safety levels and electric production are at unprecedented high levels and continue to exceed even high industry goals. Nuclear energy continues to keep the highest priority on performance improvement programs and highly trained and qualified people that maintain its record setting safety and reliability of operations. While the industry has maintained a high level of performance, the advent of deregulation and the consolidation of nuclear power plant ownership, as well as the current climate for concern about both rising energy costs and the availability of power, have raised the standard for nuclear energy's level of competitiveness in today's market place. The resulting challenge is how to more effectively manage risk and to improve performance even further in a generally high-performing industry. One of the most effective ways to develop this culture is to apply the principles of Hum an Performance Technology, or HPT. HPT is a relatively new field. Its principles are derived from the research and practice of behavioral and cognitive psychologists, instructional technologists, training designers, organizational developers, and various human resource specialists. Using the principles of HPT can help the nuclear industry successfully meet ever-changing environmental and business demands

Importance Performance Analysis as a Trade Show Performance Evaluation and Benchmarking Tool

OpenAIRE

Tafesse, Wondwesen; Skallerud, Kåre; Korneliussen, Tor

2010-01-01

Author's accepted version (post-print). The purpose of this study is to introduce importance performance analysis as a trade show performance evaluation and benchmarking tool. Importance performance analysis considers exhibitors’ performance expectation and perceived performance in unison to evaluate and benchmark trade show performance. The present study uses data obtained from exhibitors of an international trade show to demonstrate how importance performance analysis can be used to eval...

Performance improvement CME for quality: challenges inherent to the process.

Science.gov (United States)

Vakani, Farhan Saeed; O'Beirne, Ronan

2015-01-01

The purpose of this paper is to discuss the perspective debates upon the real-time challenges for a three-staged Performance Improvement Continuing Medical Education (PI-CME) model, an innovative and potential approach for future CME, to inform providers to think, prepare and to act proactively. In this discussion, the challenges associated for adopting the American Medical Association's three-staged PI-CME model are reported. Not many institutions in USA are using a three-staged performance improvement model and then customizing it to their own healthcare context for the specific targeted audience. They integrate traditional CME methods with performance and quality initiatives, and linking with CME credits. Overall the US health system is interested in a structured PI-CME model with the potential to improve physicians practicing behaviors. Knowing the dearth of evidence for applying this structured performance improvement methodology into the design of CME activities, and the lack of clarity on challenges inherent to the process that learners and providers encounter. This paper establishes all-important first step to render the set of challenges for a three-staged PI-CME model.

Performance in physiology evaluation: possible improvement by active learning strategies.

Science.gov (United States)

Montrezor, Luís H

2016-12-01

The evaluation process is complex and extremely important in the teaching/learning process. Evaluations are constantly employed in the classroom to assist students in the learning process and to help teachers improve the teaching process. The use of active methodologies encourages students to participate in the learning process, encourages interaction with their peers, and stimulates thinking about physiological mechanisms. This study examined the performance of medical students on physiology over four semesters with and without active engagement methodologies. Four activities were used: a puzzle, a board game, a debate, and a video. The results show that engaging in activities with active methodologies before a physiology cognitive monitoring test significantly improved student performance compared with not performing the activities. We integrate the use of these methodologies with classic lectures, and this integration appears to improve the teaching/learning process in the discipline of physiology and improves the integration of physiology with cardiology and neurology. In addition, students enjoy the activities and perform better on their evaluations when they use them. Copyright © 2016 The American Physiological Society.

Evaluation of Performance and Opportunities for Improvements in Automotive Power Electronics Systems: Preprint

Energy Technology Data Exchange (ETDEWEB)

Moreno, Gilberto; Bennion, Kevin; King, Charles; Narumanchi, Sreekant

2016-06-14

Thermal management strategies for automotive power electronic systems have evolved over time to reduce system cost and to improve reliability and thermal performance. In this study, we characterized the power electronic thermal management systems of two electric-drive vehicles--the 2012 Nissan LEAF and 2014 Honda Accord Hybrid. Tests were conducted to measure the insulated-gate bipolar transistor-to-coolant thermal resistances for both steady-state and transient conditions at various coolant flow rates. Water-ethylene glycol at a temperature of 65 degrees C was used as the coolant for these experiments. Computational fluid dynamics and finite element analysis models of the vehicle's power electronics thermal management system were then created and validated using experimentally obtained results. Results indicate that the Accord module provides lower steady-state thermal resistance as compared with the LEAF module. However, the LEAF design may provide improved performance in transient conditions and may have cost benefits.

The effect of S-adenosylmethionine on cognitive performance in mice: an animal model meta-analysis.

Directory of Open Access Journals (Sweden)

Sarah E Montgomery

Full Text Available Alzheimer's disease (AD is the most frequently diagnosed form of dementia resulting in cognitive impairment. Many AD mouse studies, using the methyl donor S-adenosylmethionine (SAM, report improved cognitive ability, but conflicting results between and within studies currently exist. To address this, we conducted a meta-analysis to evaluate the effect of SAM on cognitive ability as measured by Y maze performance. As supporting evidence, we include further discussion of improvements in cognitive ability, by SAM, as measured by the Morris water maze (MWM.We conducted a comprehensive literature review up to April 2014 based on searches querying MEDLINE, EMBASE, Web of Science, the Cochrane Library and Proquest Theses and Dissertation databases. We identified three studies containing a total of 12 experiments that met our inclusion criteria and one study for qualitative review. The data from these studies were used to evaluate the effect of SAM on cognitive performance according to two scenarios: 1. SAM supplemented folate deficient (SFD diet compared to a folate deficient (FD diet and 2. SFD diet compared to a nutrient complete (NC diet. Hedge's g was used to calculate effect sizes and mixed effects model meta-regression was used to evaluate moderating factors.Our findings showed that the SFD diet was associated with improvements in cognitive performance. SFD diet mice also had superior cognitive performance compared to mice on an NC diet. Further to this, meta-regression analyses indicated a significant positive effect of study quality score and treatment duration on the effect size estimate for both the FD vs SFD analysis and the SFD vs NC analysis.The findings of this meta-analysis demonstrate efficacy of SAM in acting as a cognitive performance-enhancing agent. As a corollary, SAM may be useful in improving spatial memory in patients suffering from many dementia forms including AD.

An assessment of BWR [boiling water reactor] Mark III containment challenges, failure modes, and potential improvements in performance

International Nuclear Information System (INIS)

Schroeder, J.A.; Pafford, D.J.; Kelly, D.L.; Jones, K.R.; Dallman, F.J.

1991-01-01

This report describes risk-significant challenges posed to Mark III containment systems by severe accidents as identified for Grand Gulf. Design similarities and differences between the Mark III plants that are important to containment performance are summarized. The accident sequences responsible for the challenges and the postulated containment failure modes associated with each challenge are identified and described. Improvements are discussed that have the potential either to prevent or delay containment failure, or to mitigate the offsite consequences of a fission product release. For each of these potential improvements, a qualitative analysis is provided. A limited quantitative risk analysis is provided for selected potential improvements. 21 refs., 5 figs., 46 tabs

Drag Reduction and Performance Improvement of Hydraulic Torque Converters with Multiple Biological Characteristics

Directory of Open Access Journals (Sweden)

Liu Chunbao

2016-01-01

Full Text Available Fish-like, dolphin-like, and bionic nonsmooth surfaces were employed in a hydraulic torque converter to achieve drag reduction and performance improvement, which were aimed at reducing profile loss, impacting loss and friction loss, respectively. YJSW335, a twin turbine torque converter, was bionically designed delicately. The biological characteristics consisted of fish-like blades in all four wheels, dolphin-like structure in the first turbine and the stator, and nonsmooth surfaces in the pump. The prediction performance of bionic YJSW335, obtained by computational fluid dynamics simulation, was improved compared with that of the original model, and then it could be proved that drag reduction had been achieved. The mechanism accounting for drag reduction of three factors was also investigated. After bionic design, the torque ratio and the highest efficiencies of YJSW335 were both advanced, which were very difficult to achieve through traditional design method. Moreover, the highest efficiency of the low speed area and high speed area is 85.65% and 86.32%, respectively. By economic matching analysis of the original and bionic powertrains, the latter can significantly reduce the fuel consumption and improve the operating economy of the loader.

Conceptual Designs for the Performance Improvement of APR1400 SIT and Preliminary Performance Evaluation

International Nuclear Information System (INIS)

Chu, In-Cheol; Kwon, Tae-Soon; Song, Chul-Hwa

2008-01-01

Some evolutionary type PWRs such as APR1400 and APWR adopt advanced safety injection tank (SIT). The SIT of APR1400 has a fluidic device (FD) which passively controls ECC water injection flow rate into reactor coolant system during refill and reflood phases of LB-LOCA (i.e., a high injection flow rate during the refill phase and a low injection flow rate during the reflood phase). The benefit of the FD is the elimination of the function of low pressure safety injection pump from the safety injection system. The flow controlling performance of the APR1400 FD was evaluated using a prototypical full-scale test facility, called VAPER (Valve Performance Evaluation Rig). Even though the performance of the APR1400 FD satisfied major design and licensing requirements, further improvement of the performance is expected such as the extension of total injection period, the delay of nitrogen gas discharge. Several conceptual designs have been being drawn out in order to improve the performance of the APR1400 SIT. The performance of some designs was evaluated using a small scale SIT test rig. The present paper introduces some of the conceptual designs and shows the performance evaluation experimental results

Teacher’s comprehensive training strategy for improving didactics performance

Directory of Open Access Journals (Sweden)

Pozas, W. J

2014-07-01

Full Text Available The paper describes a Teacher’s comprehensive training strategy for improving didactics performance, together with its theoretical foundations. The strategy is structured into several dimensions related to teachers’ development (lesson planning, continuing education and research. It is organized into two phases and seven stages intended to improve leadership in the teaching-learning process. The finding are the expression of a comprehensive approach to school organization at Services Polytechnic School “Horacio Cobiellas Domínguez” resulting in teachers’ academic and scientific development and a significant growth of the staff scientific potentials manifested in scientific forum enrolment. The resulting impact should lead to a general use of the proposed strategy in the Polytechnic school web. Key words: professional performance, pedagogic professional performance, didactic professional performance, teachers’ developmental strategy

Model extension and improvement for simulator-based software safety analysis

Energy Technology Data Exchange (ETDEWEB)

Huang, H.-W. [Department of Engineering and System Science, National Tsing Hua University (NTHU), 101 Section 2 Kuang Fu Road, Hsinchu, Taiwan (China) and Institute of Nuclear Energy Research (INER), No. 1000 Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China)]. E-mail: hwhwang@iner.gov.tw; Shih Chunkuan [Department of Engineering and System Science, National Tsing Hua University (NTHU), 101 Section 2 Kuang Fu Road, Hsinchu, Taiwan (China); Yih Swu [Department of Computer Science and Information Engineering, Ching Yun University, 229 Chien-Hsin Road, Jung-Li, Taoyuan County 320, Taiwan (China); Chen, M.-H. [Institute of Nuclear Energy Research (INER), No. 1000Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China); Lin, J.-M. [Taiwan Power Company (TPC), 242 Roosevelt Road, Section 3, Taipei 100, Taiwan (China)

2007-05-15

One of the major concerns when employing digital I and C system in nuclear power plant is digital system may introduce new failure mode, which differs with previous analog I and C system. Various techniques are under developing to analyze the hazard originated from software faults in digital systems. Preliminary hazard analysis, failure modes and effects analysis, and fault tree analysis are the most extensive used techniques. However, these techniques are static analysis methods, cannot perform dynamic analysis and the interactions among systems. This research utilizes 'simulator/plant model testing' technique classified in (IEEE Std 7-4.3.2-2003, 2003. IEEE Standard for Digital Computers in Safety Systems of Nuclear Power Generating Stations) to identify hazards which might be induced by nuclear I and C software defects. The recirculation flow system, control rod system, feedwater system, steam line model, dynamic power-core flow map, and related control systems of PCTran-ABWR model were successfully extended and improved. The benchmark against ABWR SAR proves this modified model is capable to accomplish dynamic system level software safety analysis and better than the static methods. This improved plant simulation can then further be applied to hazard analysis for operator/digital I and C interface interaction failure study, and the hardware-in-the-loop fault injection study.

Effect of respiratory muscle training on exercise performance in healthy individuals: a systematic review and meta-analysis.

Science.gov (United States)

Illi, Sabine K; Held, Ulrike; Frank, Irène; Spengler, Christina M

2012-08-01

Two distinct types of specific respiratory muscle training (RMT), i.e. respiratory muscle strength (resistive/threshold) and endurance (hyperpnoea) training, have been established to improve the endurance performance of healthy individuals. We performed a systematic review and meta-analysis in order to determine the factors that affect the change in endurance performance after RMT in healthy subjects. A computerized search was performed without language restriction in MEDLINE, EMBASE and CINAHL and references of original studies and reviews were searched for further relevant studies. RMT studies with healthy individuals assessing changes in endurance exercise performance by maximal tests (constant load, time trial, intermittent incremental, conventional [non-intermittent] incremental) were screened and abstracted by two independent investigators. A multiple linear regression model was used to identify effects of subjects' fitness, type of RMT (inspiratory or combined inspiratory/expiratory muscle strength training, respiratory muscle endurance training), type of exercise test, test duration and type of sport (rowing, running, swimming, cycling) on changes in performance after RMT. In addition, a meta-analysis was performed to determine the effect of RMT on endurance performance in those studies providing the necessary data. The multiple linear regression analysis including 46 original studies revealed that less fit subjects benefit more from RMT than highly trained athletes (6.0% per 10 mL · kg⁻¹ · min⁻¹ decrease in maximal oxygen uptake, 95% confidence interval [CI] 1.8, 10.2%; p = 0.005) and that improvements do not differ significantly between inspiratory muscle strength and respiratory muscle endurance training (p = 0.208), while combined inspiratory and expiratory muscle strength training seems to be superior in improving performance, although based on only 6 studies (+12.8% compared with inspiratory muscle strength training, 95% CI 3

Improved operational performance through the use of business planning tools

International Nuclear Information System (INIS)

Hoelscher, H.L.

1996-01-01

Improved operational performance at Point Beach Nuclear Plant is based on a focused business plan. Quantitative goals that compare past performance with the performance of potential competitors are the basis of the business plan. This establishes goals for the nuclear power business unit which support corporate goals. Strategies and objectives are then developed to meet the established goals. To continue support for these strategies and objectives, individual performance plans are developed for all management personnel. These performance management plans identify individual contributor actions to support the goals, and also provide periodic feedback for changes to better prioritize individual actions. Performance criteria are also established to measure progress toward achieving the goals. The author also has a program to provide incentives for improved performance based upon success of the organization in achieving established goals

The effectiveness of lean manufacturing audits in measuring operational performance improvements

Directory of Open Access Journals (Sweden)

Taggart, P.

2013-08-01

Full Text Available The hypothesis that lean manufacturing audits are an effective way to measure improvements in operational performance was tested using 64 manufacturing sites owned by a FTSE 100 company. Commonly-used lean characteristics were evaluated: policy deployment, standardised work, visual management and housekeeping, quick changeover techniques, total productive maintenance, continuous improvement (kaizen, error proofing, cultural awareness, material control, and levelling (heijunka. Operational performance was assessed employing commonly-used operational performance measures: on-time-delivery, inventory turns, and direct labour utilisation. The findings are that lean manufacturing audits are effective in measuring improvements in operational performance provided that the audit scope and the lean characteristics are aligned up front.

Healthcare Analytics: Creating a Prioritized Improvement System with Performance Benchmarking.

Science.gov (United States)

Kolker, Eugene; Kolker, Evelyne

2014-03-01

The importance of healthcare improvement is difficult to overstate. This article describes our collaborative work with experts at Seattle Children's to create a prioritized improvement system using performance benchmarking. We applied analytics and modeling approaches to compare and assess performance metrics derived from U.S. News and World Report benchmarking data. We then compared a wide range of departmental performance metrics, including patient outcomes, structural and process metrics, survival rates, clinical practices, and subspecialist quality. By applying empirically simulated transformations and imputation methods, we built a predictive model that achieves departments' average rank correlation of 0.98 and average score correlation of 0.99. The results are then translated into prioritized departmental and enterprise-wide improvements, following a data to knowledge to outcomes paradigm. These approaches, which translate data into sustainable outcomes, are essential to solving a wide array of healthcare issues, improving patient care, and reducing costs.

The Social Responsibility Performance Outcomes Model: Building Socially Responsible Companies through Performance Improvement Outcomes.

Science.gov (United States)

Hatcher, Tim

2000-01-01

Considers the role of performance improvement professionals and human resources development professionals in helping organizations realize the ethical and financial power of corporate social responsibility. Explains the social responsibility performance outcomes model, which incorporates the concepts of societal needs and outcomes. (LRW)

Performance analysis of switching systems

NARCIS (Netherlands)

Berg, van den R.A.

2008-01-01

Performance analysis is an important aspect in the design of dynamic (control) systems. Without a proper analysis of the behavior of a system, it is impossible to guarantee that a certain design satisfies the system’s requirements. For linear time-invariant systems, accurate performance analyses are

PERFORMANCE INDICATORS: A COMPARATIVE ANALYSIS BETWEEN PUBLIC AND PRIVATE COLLEGES IN BRAZIL

Directory of Open Access Journals (Sweden)

Átila de Melo Lira

2015-06-01

Full Text Available A comparative analysis between the use of performance indicators to public and private organizations have always been required to examine the scenario related to both. This study seeks to analyze the use of Balanced Scorecard (BSC to identify and understand the main differences and similarities in public and private higher education institutions (HEIs in Brazil in relation to the use of other organizations performance indicators. A quantitative and exploratory approach was adopted using institutional documents analysis. Data was searched on the websites of Brazilian higher education public and private organizations in order to accomplish this analysis comparative. The results showed that even reviewing few public institutions the use of performance indicators appears to be more efficient than those applied to the private ones. Private universities should observe and improve their processes and performance indicators based on those used in Brazilian public universities. This initial research still opens a horizon so that other studies be developed within this thought stream.

Towards improving construction labor productivity and projects’ performance

Directory of Open Access Journals (Sweden)

Mostafa E. Shehata

2011-12-01

Full Text Available Proper management of resources in construction projects can yield substantial savings in time and cost. As construction is a labor-intensive industry, this paper focuses on labor productivity in the construction industry. This study considers the current state-of-the-art issues relevant to this subject. It covers the construction labor productivity definitions, aspects, measurements, factors affecting it, different techniques used for measuring it and modeling techniques. The main outcome from the literature is that there is no standard definition of productivity. This study provides a guide for necessary steps required to improve construction labor productivity and consequently, the project performance. It can help improve the overall performance of construction projects through the implementation of the concept of benchmarks. Also, it gives an up to date concept of loss of productivity measurement for construction productivity claims. Two major case studies, from the literature, are presented to show construction labor productivity rates, factors affecting construction labor productivity and how to improve it.

Performance Analysis of Receive Diversity in Wireless Sensor Networks over GBSBE Models

Directory of Open Access Journals (Sweden)

Tai-hoon Kim

2010-12-01

Full Text Available Wireless sensor networks have attracted a lot of attention recently. In this paper, we develop a channel model based on the elliptical model for multipath components involving randomly placed scatterers in the scattering region with sensors deployed on a field. We verify that in a sensor network, the use of receive diversity techniques improves the performance of the system. Extensive performance analysis of the system is carried out for both single and multiple antennas with the applied receive diversity techniques. Performance analyses based on variations in receiver height, maximum multipath delay and transmit power have been performed considering different numbers of antenna elements present in the receiver array, Our results show that increasing the number of antenna elements for a wireless sensor network does indeed improve the BER rates that can be obtained.

Job-demand for learning and job-related learning: the mediating effect of job performance improvement initiatives

OpenAIRE

Loon, M; Bartram, T

2007-01-01

This study examined whether job-performance-improvementinitiatives mediate the relationship between individuals’ job-demand for learning and job-related learning. Data were obtained from 115 full-time\\ud employees in a diverse range of occupations. A partial least squares analysis revealed that job-performance-improvement-initiatives mediate partially the effects of job-demand for learning on job-related learning. Several implications\\ud for future research and policy are drawn from the findi...

Improvement of sludge removal performance for steam generators

International Nuclear Information System (INIS)

Nishida, K.; Sakai, K.; Ito, H.; Tanahashi, A.; Nakao, F.

2002-01-01

Scale, mainly consisting of magnetite, flows on the secondary side of steam generators (SGs), causing the formation of concentrations of impurities on the tubesheet (TS), increasing the fouling of tube heat transfer, and blocking the broached egg crates (BEC) on the tube support plates (TSP). Accumulation of sludge on the tubesheet forms environment in which impurities are highly concentrated on the tubes. And we have experienced tube degradation, in the past, from the concentration of impurities. In Japan, the first tubesheet sludge lancing, via water jets, was done at the Mihama-2 plant in 1975. And that is why this pile sludge becomes hard depending on time, removal made an effort toward removal with CECIL* (in bundle cleaning system) us very difficulty. However, sludge remained in localized areas and it had possibility of concentration. So that we improve the CECIL for the purpose of removing it, and we improved removal performance of the device. In addition to the improvement of CECIL, we install a sludge collector in order to decrease accumulation of sludge on the tubesheet. This paper introduces these improvements in sludge removal performance. (authors)

Biochar Improves Performance of Plants for Mine Soil Revegetation

Science.gov (United States)

Biochar (the solid by-product of pyrolysis of biomass), has the potential to improve plant performance for revegetation of mine soils by improving soil chemistry, fertility, moisture holding capacity and by binding heavy metals. We investigated the effect of gasified conifer sof...

Improving total-building seismic performance using linear fluid viscous dampers

OpenAIRE

Del Gobbo, GM; Blakeborough, A; Williams, MS

2018-01-01

Previous research has revealed that Eurocode-compliant structures can experience structural and nonstructural damage during earthquakes. Retrofitting buildings with fluid viscous dampers (FVDs) can improve interstorey drifts and floor accelerations, two structural parameters that characterize seismic demand. Previous research focusing on FVD applications for improving seismic performance has focused on structural performance. Structural parameters such as interstorey drifts and floor accelera...

Working Memory Training Improves Dual-Task Performance on Motor Tasks.

Science.gov (United States)

Kimura, Takehide; Kaneko, Fuminari; Nagahata, Keita; Shibata, Eriko; Aoki, Nobuhiro

2017-01-01

The authors investigated whether working memory training improves motor-motor dual-task performance consisted of upper and lower limb tasks. The upper limb task was a simple reaction task and the lower limb task was an isometric knee extension task. 45 participants (age = 21.8 ± 1.6 years) were classified into a working memory training group (WM-TRG), dual-task training group, or control group. The training duration was 2 weeks (15 min, 4 times/week). Our results indicated that working memory capacity increased significantly only in the WM-TRG. Dual-task performance improved in the WM-TRG and dual-task training group. Our study provides the novel insight that working memory training improves dual-task performance without specific training on the target motor task.

improving performance of laying hens

Directory of Open Access Journals (Sweden)

A.P Sinurat

2012-10-01

Full Text Available A trial was conducted in order to study the effect of the supplementation of Avizyme 1500® (Danisco Animal Nutrition, Marlborough, UK on the performance of laying hens for one year. A control diet based on corn – soybean meal was formulated to meet nutrient requirement of ISA Brown laying hens. Two treatments, the control diet (C and C + 1000 g Avizyme/tonne diet were tested. Each diet was fed to 80 birds (20 replicates of 4 birds from 20 to 72 weeks of age, and performances of birds (feed intake, egg production, egg size, egg mass, feed conversion ratio, and egg quality were measured. All data were subject to analyses of variance following the t-test. Results showed that the addition of Avizyme 1500 to the feed reduced feed intake by 4% (P < 0.01, mortality by 75 % or from 15% to 3.75% (P < 0.01 and improved the feed conversion ratio by 3 % (P < 0.05. The high mortality of the control treatment (15% is explained by an E.coli infection that was observed following the post-mortem examination of dead birds. The egg production (HD and HH, egg size and egg mass however were not significantly affected by the Avizyme supplementation. Egg quality (HU, yolk colour score, yolk weight and shell thickness was not significantly affected by Avizyme supplementation. It can be concluded that the supplementation of 1000 g Avizyme /tonne of diet improved feed efficiency and this was mediated via a reduction in feed intake.

Human performance improvement in organizations: Potential application for the nuclear industry

International Nuclear Information System (INIS)

2005-11-01

This publication is primarily intended for managers and specialists in nuclear facility operating organizations working in the area of human performance improvement. It is intended to provide them with practical information they can use to improve human performance in their organizations. While some of the information provided in this publication is based upon the experience of nuclear facility operating organizations, most of it comes from human performance improvement initiatives in non-nuclear organizations and industries. The nuclear industry has a long tradition of sharing good management practices in order to foster continuous improvement. However, it is not always realized that many of the practices that are now well established initially came from non-nuclear industries and were subsequently adapted for application to nuclear power plant operating organizations. There is, therefore, good reason to periodically review non-nuclear industry practices for ideas that might have direct or indirect application to the nuclear industry in order to potentially gain benefits such as the following: new approaches to certain problem areas, insights into new or impending challenges, improvements in existing practices, benchmarking of opportunities, development of learning organizations and avoidance of collective blind spots. The preparation of this report was an activity of the project on Effective Training to Achieve Excellence in the Performance of NPP Personnel. The objective of this project is to enhance the capability of Member States to utilize proven practices developed and transferred by the IAEA for improving personnel performance. The expected outcome from this project is the increased use by organizations in Members States of proven engineering and management practices and methodologies developed and transferred by the IAEA to improve personnel performance

Deciphering the imperative: translating public health quality improvement into organizational performance management gains.

Science.gov (United States)

Beitsch, Leslie M; Yeager, Valerie A; Moran, John

2015-03-18

With the launching of the national public health accreditation program under the auspices of the Public Health Accreditation Board (PHAB), health department momentum around quality improvement adoption has accelerated. Domain 9 of the PHAB standards (one of 12 domains) focuses on evaluation and improvement of performance and is acting as a strong driver for quality improvement and performance management implementation within health departments. Widespread adoption of quality improvement activities in public health trails that in other US sectors. Several performance management models have received broad acceptance, including models among government and nonprofits. A model specifically for public health has been developed and is presented herein. All models in current use reinforce customer focus; streamlined, value-added processes; and strategic alignment. All are structured to steer quality improvement efforts toward organizational priorities, ensuring that quality improvement complements performance management. High-performing health departments harness the synergy of quality improvement and performance management, providing powerful tools to achieve public health strategic imperatives.

Neurofeedback training improves attention and working memory performance.

Science.gov (United States)

Wang, Jinn-Rong; Hsieh, Shulan

2013-12-01

The present study aimed to investigate the effectiveness of the frontal-midline theta (fmθ) activity uptraining protocol on attention and working memory performance of older and younger participants. Thirty-two participants were recruited. Participants within each age group were randomly assigned to either the neurofeedback training (fmθ uptraining) group or the sham-neurofeedback training group. There was a significant improvement in orienting scores in the older neurofeedback training group. In addition, there was a significant improvement in conflict scores in both the older and young neurofeedback training groups. However, alerting scores failed to increase. In addition, the fmθ training was found to improve working memory function in the older participants. The results further showed that fmθ training can modulate resting EEG for both neurofeedback groups. Our study demonstrated that fmθ uptraining improved attention and working memory performance and theta activity in the resting state for normal aging adults. In addition, younger participants also benefited from the present protocol in terms of improving their executive function. The current findings contribute to a better understanding of the mechanisms underlying neurofeedback training in cognitive function, and suggest that the fmθ uptraining protocol is an effective intervention program for cognitive aging. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Improving torque per kilogram magnet of permanent magnet couplings using finite element analysis

DEFF Research Database (Denmark)

Högberg, Stig; Jensen, Bogi Bech; Bendixen, Flemming Buus

2013-01-01

This paper presents the methodology and subsequent findings of a performance-improvement routine that employs automated finite element (FE) analysis to increase the torque-per-kilogram-magnet (TPKM) of a permanent magnet coupling (PMC). The routine is applied to a commercially available cylindrical...

(Too) optimistic about optimism: the belief that optimism improves performance.

Science.gov (United States)

Tenney, Elizabeth R; Logg, Jennifer M; Moore, Don A

2015-03-01

A series of experiments investigated why people value optimism and whether they are right to do so. In Experiments 1A and 1B, participants prescribed more optimism for someone implementing decisions than for someone deliberating, indicating that people prescribe optimism selectively, when it can affect performance. Furthermore, participants believed optimism improved outcomes when a person's actions had considerable, rather than little, influence over the outcome (Experiment 2). Experiments 3 and 4 tested the accuracy of this belief; optimism improved persistence, but it did not improve performance as much as participants expected. Experiments 5A and 5B found that participants overestimated the relationship between optimism and performance even when their focus was not on optimism exclusively. In summary, people prescribe optimism when they believe it has the opportunity to improve the chance of success-unfortunately, people may be overly optimistic about just how much optimism can do. PsycINFO Database Record (c) 2015 APA, all rights reserved.

Powerplant productivity improvement study: policy analysis and incentive assessment. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1979-05-01

Policy options that the Illinois Commerce Commission might adopt in order to promote improved power plant productivity for existing units in Illinois are identified and analyzed. These policy options would generally involve either removing existing disincentives and/or adding direct incentives through the regulatory process. The following activities are reported: in-depth review of existing theoretical and empirical literature in the areas of power plant reliability, regulatory utility efficiency and performance incentives, and impacts of various regulatory mechanisms such as the Fuel Adjustment Clauses on productivity; contacts with other state public utility commissions known to be investigating or implementing productivity improvement incentive mechanisms; documentation and analysis of incentive mechanisms adopted or under consideration in other states; analysis of current regulatory practice in Illinois as it relates to power plant productivity incentives and disincentives; identification of candidate incentive mechanisms for consideration by the Illinois Commerce Commission; and analysis and evaluation of these candidates. 72 references, 8 figures.

Autogenic-feedback training improves pilot performance during emergency flying conditions

Science.gov (United States)

Kellar, Michael A.; Folen, Raymond A.; Cowings, Patricia S.; Toscano, William B.; Hisert, Glen L.

1994-01-01

Studies have shown that autonomous mode behavior is one cause of aircraft fatalities due to pilot error. In such cases, the pilot is in a high state of psychological and physiological arousal and tends to focus on one problem, while ignoring more critical information. This study examined the effect of training in physiological self-recognition and regulation, as a means of improving crew cockpit performance. Seventeen pilots were assigned to the treatment and control groups matched for accumulated flight hours. The treatment group comprised three pilots of HC-130 Hercules aircraft and four HH-65 Dolphin helicopter pilots; the control group comprised three pilots of HC-130's and six Dolphin helicopter pilots. During an initial flight, physiological data were recorded for each crew member and individual crew performance was rated by an instructor pilot. Eight crewmembers were then taught to regulate their own physiological response levels using Autogenic-Feedback Training (AFT). The remaining subjects received no training. During a second flight, treatment subjects showed significant improvement in performance, while controls did not improve. The results indicate that AFT management of high states of physiological arousal may improve pilot performance during emergency flying conditions.

Improving Compressed Air System Performance: A Sourcebook for Industry v3

Energy Technology Data Exchange (ETDEWEB)

Ron Marshall, William Scales, Gary Shafer, Paul Shaw, Paul Sheaffer, Rick Stasyshan, H.P.

2016-03-01

This sourcebook is designed to provide compressed air system users with a reference that outlines opportunities for system performance improvements. It is not intended to be a comprehensive technical text on improving compressed air systems, but rather a document that makes compressed air system users aware of the performance improvement potential, details some of the significant opportunities, and directs users to additional sources of assistance.

Improvement of burnup analysis for pebble bed reactors with an accumulative fuel loading scheme

International Nuclear Information System (INIS)

Simanullang, Irwan Liapto; Obara, Toru

2015-01-01

Given the limitations of natural uranium resources, innovative nuclear power plant concepts that increase the efficiency of nuclear fuel utilization are needed. The Pebble Bed Reactor (PBR) shows some potential to achieve high efficiency in natural uranium utilization. To simplify the PBR concept, PBR with an accumulation fuel loading scheme was introduced and the Fuel Handling System (FHS) removed. In this concept, the pebble balls are added little by little into the reactor core until the pebble balls reach the top of the reactor core, and all pebble balls are discharged from the core at the end of the operation period. A code based on the MVP/MVP-BURN method has been developed to perform an analysis of a PBR with the accumulative fuel loading scheme. The optimum fuel composition was found using the code for high burnup performance. Previous efforts provided several motivations to improve the burnup performance: First, some errors in the input code were corrected. This correction, and an overall simplification of the input code, was implemented for easier analysis of a PBR with the accumulative fuel loading scheme. Second, the optimum fuel design had been obtained in the infinite geometry. To improve the optimum fuel composition, a parametric survey was obtained by varying the amount of Heavy Metal (HM) uranium per pebble and the degree of uranium enrichment. Moreover, an entire analysis of the parametric survey was obtained in the finite geometry. The results show that improvements in the fuel composition can lead to more accurate analysis with the code. (author)

Performance improvement through management audits

International Nuclear Information System (INIS)

Arter, D.R.

1986-01-01

We should go back to the basics of what a quality assurance program is designed to accomplish and then use that program to provide confidence to the public that actions are correct. The quality assurance management audit, if done responsible with trained people, is the best tool we have to monitor the goal of conducting business safely and correctly. Audit report should be used to project future performance and should not be used as a forum for recommendations. They should be presented in such a manner as to allow the managers involved to continually improve the work activity

Evaluation of Service Quality in Brewery Using Importance-Performance Analysis

Directory of Open Access Journals (Sweden)

Ingaldi Manuela

2016-03-01

Full Text Available Because of its specificity, service quality is difficult to assess, especially since there is no materiality in it, it cannot be seen. Usually the gap between the expectations of customer and their perceptions in relation to a particular service is observed. This article aim is to evaluate the quality of catering services offered by one of the breweries (restaurant in Silesia. The importance-performance analysis, which is often underestimated, was used in order to show its advantages. The survey was conducted among 137 customers of the selected brewery in Czestochowa. The average values of evaluations of all individual questions from both parts of survey were calculated. Then, average values for the pair of statements (performance; importance were placed in the importance-performance map. The analysis revealed that the service quality of the research brewery is placed in quadrant II, i.e. the area of reasonable property of needs. This means that the improvement of service quality is not necessary.

Multi-GPU parallel algorithm design and analysis for improved inversion of probability tomography with gravity gradiometry data

Science.gov (United States)

Hou, Zhenlong; Huang, Danian

2017-09-01

In this paper, we make a study on the inversion of probability tomography (IPT) with gravity gradiometry data at first. The space resolution of the results is improved by multi-tensor joint inversion, depth weighting matrix and the other methods. Aiming at solving the problems brought by the big data in the exploration, we present the parallel algorithm and the performance analysis combining Compute Unified Device Architecture (CUDA) with Open Multi-Processing (OpenMP) based on Graphics Processing Unit (GPU) accelerating. In the test of the synthetic model and real data from Vinton Dome, we get the improved results. It is also proved that the improved inversion algorithm is effective and feasible. The performance of parallel algorithm we designed is better than the other ones with CUDA. The maximum speedup could be more than 200. In the performance analysis, multi-GPU speedup and multi-GPU efficiency are applied to analyze the scalability of the multi-GPU programs. The designed parallel algorithm is demonstrated to be able to process larger scale of data and the new analysis method is practical.

Improved Bevatron local injector ion source performance

International Nuclear Information System (INIS)

Stover, G.; Zajec, E.

1985-05-01

Performance tests of the improved Bevatron Local Injector PIG Ion Source using particles of Si 4 + , Ne 3 + , and He 2 + are described. Initial measurements of the 8.4 keV/nucleon Si 4 + beam show an intensity of 100 particle microamperes with a normalized emittance of .06 π cm-mrad. A low energy beam transport line provides mass analysis, diagnostics, and matching into a 200 MHz RFQ linac. The RFQ accelerates the beam from 8.4 to 200 keV/nucleon. The injector is unusual in the sense that all ion source power supplies, the ac distribution network, vacuum control equipment, and computer control system are contained in a four bay rack mounted on insulators which is located on a floor immediately above the ion source. The rack, transmission line, and the ion source housing are raised by a dc power supply to 80 kilovolts above earth ground. All power supplies, which are referenced to rack ground, are modular in construction and easily removable for maintenance. AC power is delivered to the rack via a 21 kVA, 3-phase transformer. 2 refs., 5 figs., 1 tab

Learning to improve path planning performance

International Nuclear Information System (INIS)

Chen, Pang C.

1995-04-01

In robotics, path planning refers to finding a short. collision-free path from an initial robot configuration to a desired configuratioin. It has to be fast to support real-time task-level robot programming. Unfortunately, current planning techniques are still too slow to be effective, as they often require several minutes, if not hours of computation. To remedy this situation, we present and analyze a learning algorithm that uses past experience to increase future performance. The algorithm relies on an existing path planner to provide solutions to difficult tasks. From these solutions, an evolving sparse network of useful robot configurations is learned to support faster planning. More generally, the algorithm provides a speedup-learning framework in which a slow but capable planner may be improved both cost-wise and capability-wise by a faster but less capable planner coupled with experience. The basic algorithm is suitable for stationary environments, and can be extended to accommodate changing environments with on-demand experience repair and object-attached experience abstraction. To analyze the algorithm, we characterize the situations in which the adaptive planner is useful, provide quantitative bounds to predict its behavior, and confirm our theoretical results with experiments in path planning of manipulators. Our algorithm and analysis are sufficiently, general that they may also be applied to other planning domains in which experience is useful

How Six Sigma Methodology Improved Doctors' Performance

Science.gov (United States)

Zafiropoulos, George

2015-01-01

Six Sigma methodology was used in a District General Hospital to assess the effect of the introduction of an educational programme to limit unnecessary admissions. The performance of the doctors involved in the programme was assessed. Ishikawa Fishbone and 5 S's were initially used and Pareto analysis of their findings was performed. The results…

42 CFR 460.136 - Internal quality assessment and performance improvement activities.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Internal quality assessment and performance improvement activities. 460.136 Section 460.136 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES....136 Internal quality assessment and performance improvement activities. (a) Quality assessment and...

Lightning Performance on Overhead Distribution Lines : After Improvement Field Observation

Directory of Open Access Journals (Sweden)

Reynaldo Zoro

2009-11-01

Full Text Available Two feeders of 20 kV overhead distribution lines which are located in a high lightning density area are chosen to be observed as a field study due to their good lightning performance after improvement of lightning protection system. These two feeders used the new overhead ground wire and new line arrester equipped with lightning counter on the main lines. The significant reduced of lines outages are reported. Study was carried out to observe these improvements by comparing to the other two feeders line which are not improved and not equipped yet with the ground wire and line arrester. These two feeders located in the nearby area. Two cameras were installed to record the trajectory of the lightning strikes on the improved lines. Lightning peak currents are measured using magnetic tape measurement system installed on the grounding lead of lightning arrester. Lightning overvoltage calculations are carried out by using several scenarios based on observation results and historical lightning data derived from lightning detection network. Lightning overvoltages caused by indirect or direct strikes are analyzed to get the lightning performance of the lines. The best scenario was chosen and performance of the lines were improved significantly by installing overhead ground wire and improvement of lightning arrester installation.

Design Parameter Optimization of a Silicon-Based Grating Waveguide for Performance Improvement in Biochemical Sensor Application.

Science.gov (United States)

Hong, Yoo-Seung; Cho, Chun-Hyung; Sung, Hyuk-Kee

2018-03-05

We performed numerical analysis and design parameter optimization of a silicon-based grating waveguide refractive index (RI) sensor. The performance of the grating waveguide RI sensor was determined by the full-width at half-maximum (FWHM) and the shift in the resonance wavelength in the transmission spectrum. The transmission extinction, a major figure-of-merit of an RI sensor that reflects both FWHM and resonance shift performance, could be significantly improved by the proper determination of three major grating waveguide parameters: duty ratio, grating period, and etching depth. We analyzed the transmission characteristics of the grating waveguide under various design parameter conditions using a finite-difference time domain method. We achieved a transmission extinction improvement of >26 dB under a given bioenvironmental target change by the proper choice of the design procedure and parameters. This design procedure and choice of appropriate parameters would enable the widespread application of silicon-based grating waveguide in high-performance RI biochemical sensor.

An Integrated Gate Turnaround Management Concept Leveraging Big Data/Analytics for NAS Performance Improvements

Science.gov (United States)

Chung, William; Chachad, Girish; Hochstetler, Ronald

2016-01-01

The Integrated Gate Turnaround Management (IGTM) concept was developed to improve the gate turnaround performance at the airport by leveraging relevant historical data to support optimization of airport gate operations, which include: taxi to the gate, gate services, push back, taxi to the runway, and takeoff, based on available resources, constraints, and uncertainties. By analyzing events of gate operations, primary performance dependent attributes of these events were identified for the historical data analysis such that performance models can be developed based on uncertainties to support descriptive, predictive, and prescriptive functions. A system architecture was developed to examine system requirements in support of such a concept. An IGTM prototype was developed to demonstrate the concept using a distributed network and collaborative decision tools for stakeholders to meet on time pushback performance under uncertainties.

Do clinical safety charts improve paramedic key performance indicator results? (A clinical improvement programme evaluation).

Science.gov (United States)

Ebbs, Phillip; Middleton, Paul M; Bonner, Ann; Loudfoot, Allan; Elliott, Peter

2012-07-01

Is the Clinical Safety Chart clinical improvement programme (CIP) effective at improving paramedic key performance indicator (KPI) results within the Ambulance Service of New South Wales? The CIP intervention area was compared with the non-intervention area in order to determine whether there was a statistically significant improvement in KPI results. The CIP was associated with a statistically significant improvement in paramedic KPI results within the intervention area. The strategies used within this CIP are recommended for further consideration.

Improving Employee Satisfaction Priority through Performance Control Matrix

Directory of Open Access Journals (Sweden)

Shun-Hsing Chen

2014-11-01

Full Text Available The study addresses Performance Control Matrix (PCM to determine service quality items of priority for improvement. Most businesses focus on customer satisfaction when undertaking surveys of satisfaction and dissatisfaction, while generally neglecting employee satisfaction. Therefore, this study develops an integrated model to improve service quality in Taiwanese finance industry employees. A questionnaire is designed to determine the priority of improvement objectives derived from certain questionnaire items that fall into the improvement zone of the PCM. Ten items are found to fall into the improvement zone of the PCM. The present results show that the finance industry employees surveyed in Taiwan were dissatisfied with their job security, salaries, annual bonus, and fair distribution of operational profits. The ten improvement items mostly belong to two dimensions - ‘Pay and Benefits’ and ‘Motivation’. The managers of the financial institutions should seek to improve these quality attributes by devoting more resources to these items, thus promoting employee satisfaction.

Advances in three-dimensional field analysis and evaluation of performance parameters of electrical machines

Science.gov (United States)

Sivasubramaniam, Kiruba

This thesis makes advances in three dimensional finite element analysis of electrical machines and the quantification of their parameters and performance. The principal objectives of the thesis are: (1)the development of a stable and accurate method of nonlinear three-dimensional field computation and application to electrical machinery and devices; and (2)improvement in the accuracy of determination of performance parameters, particularly forces and torque computed from finite elements. Contributions are made in two general areas: a more efficient formulation for three dimensional finite element analysis which saves time and improves accuracy, and new post-processing techniques to calculate flux density values from a given finite element solution. A novel three-dimensional magnetostatic solution based on a modified scalar potential method is implemented. This method has significant advantages over the traditional total scalar, reduced scalar or vector potential methods. The new method is applied to a 3D geometry of an iron core inductor and a permanent magnet motor. The results obtained are compared with those obtained from traditional methods, in terms of accuracy and speed of computation. A technique which has been observed to improve force computation in two dimensional analysis using a local solution of Laplace's equation in the airgap of machines is investigated and a similar method is implemented in the three dimensional analysis of electromagnetic devices. A new integral formulation to improve force calculation from a smoother flux-density profile is also explored and implemented. Comparisons are made and conclusions drawn as to how much improvement is obtained and at what cost. This thesis also demonstrates the use of finite element analysis to analyze torque ripples due to rotor eccentricity in permanent magnet BLDC motors. A new method for analyzing torque harmonics based on data obtained from a time stepping finite element analysis of the machine is

Hydrogen Safety Sensor Performance and Use Gap Analysis: Preprint

Energy Technology Data Exchange (ETDEWEB)

Buttner, William J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burgess, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schmidt, Kara [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hartmann, Kevin S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wright, Hannah [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Weidner, Eveline [Joint Research Centre, Petten, the Netherlands; Cebolla, Rafael O. [Joint Research Centre, Petten, the Netherlands; Bonato, Christian [Joint Research Centre, Petten, the Netherlands; Moretto, Pietro [Joint Research Centre, Petten, the Netherlands

2017-11-15

Hydrogen sensors are recognized as an important technology for facilitating the safe implementation of hydrogen as an alternative fuel, and there are numerous reports of a sensor alarm successfully preventing a potentially serious event. However, gaps in sensor metrological specifications, as well as in their performance for some applications, exist.The U.S. Department of Energy (DOE) Fuel Cell Technology Office published a short list of critical gaps in the 2007 and 2012 multiyear project plans; more detailed gap analyses were independently performed by the JRC and NREL. There have been, however, some significant advances in sensor technologies since these assessments, including the commercial availability of hydrogen sensors with fast response times (t90 less than 1 s, which had been an elusive DOE target since 2007), improved robustness to chemical poisons, improved selectivity, and improved lifetime and stability. These improvements, however, have not been universal and typically pertain to select platforms or models. Moreover, as hydrogen markets grow and new applications are being explored, more demands will be imposed on sensor performance. The hydrogen sensor laboratories at NREL and JRC are currently updating the hydrogen safety sensor gap analysis through direct interaction with international stakeholders in the hydrogen community, especially end-users. NREL and the JRC are currently organizing a series of workshops (in Europe and the U.S.) with sensor developers, end-users, and other stakeholders in 2017 to identify technology gaps and to develop a path forward to address them. One workshop is scheduled for May 10 in Brussels, Belgium at the Headquarters of the Fuel Cell and Hydrogen Joint Undertaking. A second workshop is planned at the National Renewable Energy Laboratory in Golden, CO, USA. This presentation will review improvements in sensor technologies in the past 5 to 10 years, identify gaps in sensor performance and use requirements, and identify

Economic Analysis of Improved Alkaline Water Electrolysis

International Nuclear Information System (INIS)

Kuckshinrichs, Wilhelm; Ketelaer, Thomas; Koj, Jan Christian

2017-01-01

Alkaline water electrolysis (AWE) is a mature hydrogen production technology and there exists a range of economic assessments for available technologies. For advanced AWEs, which may be based on novel polymer-based membrane concepts, it is of prime importance that development comes along with new configurations and technical and economic key process parameters for AWE that might be of interest for further economic assessments. This paper presents an advanced AWE technology referring to three different sites in Europe (Germany, Austria, and Spain). The focus is on financial metrics, the projection of key performance parameters of advanced AWEs, and further financial and tax parameters. For financial analysis from an investor’s (business) perspective, a comprehensive assessment of a technology not only comprises cost analysis but also further financial analysis quantifying attractiveness and supply/market flexibility. Therefore, based on cash flow (CF) analysis, a comprehensible set of metrics may comprise levelised cost of energy or, respectively, levelized cost of hydrogen (LCH) for cost assessment, net present value (NPV) for attractiveness analysis, and variable cost (VC) for analysis of market flexibility. The German AWE site turns out to perform best in all three financial metrics (LCH, NPV, and VC). Though there are slight differences in investment cost and operation and maintenance cost projections for the three sites, the major cost impact is due to the electricity cost. Although investment cost is slightly lower and labor cost is significantly lower in Spain, the difference can not outweigh the higher electricity cost compared to Germany. Given the assumption that the electrolysis operators are customers directly and actively participating in power markets, and based on the regulatory framework in the three countries, in this special case electricity cost in Germany is lowest. However, as electricity cost is profoundly influenced by political decisions as

Economic Analysis of Improved Alkaline Water Electrolysis

Energy Technology Data Exchange (ETDEWEB)

Kuckshinrichs, Wilhelm, E-mail: w.kuckshinrichs@fz-juelich.de; Ketelaer, Thomas; Koj, Jan Christian [Forschungszentrum Juelich, Institute for Energy and Climate Research – Systems Analysis and Technology Evaluation (IEK-STE), Juelich (Germany)

2017-02-20

Alkaline water electrolysis (AWE) is a mature hydrogen production technology and there exists a range of economic assessments for available technologies. For advanced AWEs, which may be based on novel polymer-based membrane concepts, it is of prime importance that development comes along with new configurations and technical and economic key process parameters for AWE that might be of interest for further economic assessments. This paper presents an advanced AWE technology referring to three different sites in Europe (Germany, Austria, and Spain). The focus is on financial metrics, the projection of key performance parameters of advanced AWEs, and further financial and tax parameters. For financial analysis from an investor’s (business) perspective, a comprehensive assessment of a technology not only comprises cost analysis but also further financial analysis quantifying attractiveness and supply/market flexibility. Therefore, based on cash flow (CF) analysis, a comprehensible set of metrics may comprise levelised cost of energy or, respectively, levelized cost of hydrogen (LCH) for cost assessment, net present value (NPV) for attractiveness analysis, and variable cost (VC) for analysis of market flexibility. The German AWE site turns out to perform best in all three financial metrics (LCH, NPV, and VC). Though there are slight differences in investment cost and operation and maintenance cost projections for the three sites, the major cost impact is due to the electricity cost. Although investment cost is slightly lower and labor cost is significantly lower in Spain, the difference can not outweigh the higher electricity cost compared to Germany. Given the assumption that the electrolysis operators are customers directly and actively participating in power markets, and based on the regulatory framework in the three countries, in this special case electricity cost in Germany is lowest. However, as electricity cost is profoundly influenced by political decisions as

Improved Laser performance through Planar Waveguide Technology Development

Data.gov (United States)

National Aeronautics and Space Administration — We propose a laser technology development to improve efficiency and performance for a variety of science applications including: Lunar Ice, 2-Step Laser Tandem Mass...

Performance of the ALICE PHOS trigger and improvements for RUN 2

International Nuclear Information System (INIS)

Zhao, C; Røed, K; Skaali, T B; Liu, L; Rohrich, D; Kharlov, Y; Bratrud, L; Alme, J

2013-01-01

This paper will discuss the performance of the PHOS level-0 trigger and planned improvements for RUN 2. Due to hardware constraints the Trigger Region Unit boards are limited to an operating frequency of 20 MHz. This has led to some ambiguity and biases of the trigger inputs. The trigger input generation scheme was therefore optimized to improve the performance. The PHOS level-0 trigger system has been working with an acceptable efficiency and purity. Proposed actions to further improve the performance and possibly eliminate the impact of the biased trigger inputs will also be presented

A Step beyond Univision Evaluation: Using a Systems Model of Performance Improvement.

Science.gov (United States)

Sleezer, Catherine M.; Zhang, Jiping; Gradous, Deane B.; Maile, Craig

1999-01-01

Examines three views of performance improvement--scientific management, instructional design, and systems thinking--each providing a unique view of performance improvement and specific roles for evaluation. Provides an integrated definition of performance and a synthesis model that encompasses the three views. (AEF)

Citrus Flavonoid Supplementation Improves Exercise Performance in Trained Athletes

Directory of Open Access Journals (Sweden)

Elvera Overdevest, Jeroen A. Wouters, Kevin H.M. Wolfs, Job J.M. van Leeuwen, Sam Possemiers

2018-03-01

Full Text Available Previous studies have shown that polyphenol supplementation may be an effective strategy to improve exercise performance, due to their antioxidant character and ability to stimulate NO production. These properties may contribute to exercise performance, yet no conclusive research has been performed in exploring the direct effects of citrus flavonoids on human exercise performance. Therefore, the purpose of this study was to assess whether supplementation of a customized citrus flavonoid (CF extract for 4 weeks improves cycling time-trial performance in trained male athletes. In a double-blind, randomized, parallel study, 39 healthy, trained males were given a daily dose of either 500 mg of a customized citrus flavonoid extract (CF or a placebo for 4 weeks. Exercise performance was tested by means of a time-trial test on a cycle ergometer, during which participants had to generate as much power as possible for duration of 10 minutes. Absolute power output significantly increased with 14.9 ± 3.9 W after 4 weeks of CF supplementation, corresponding with a 5.0% increase, compared to 3.8 ± 3.2 W (1.3% increase in placebo (p < 0.05. In addition, oxygen consumption/power ratio significantly decreased in the CF group compared to placebo (p = 0.001, and a trend was found in the change in peak power output in CF (18.2 ± 23.2 W versus placebo (-28.4 ± 17.6 W; p = 0.116. The current study is the first convincing report that citrus flavonoid supplementation can improve exercise performance, as shown by a significant increase in power output during the exercise test.

Cleanliness criteria to improve steam generator performance

International Nuclear Information System (INIS)

Schwarz, T.; Bouecke, R.; Odar, S.

2005-01-01

High steam generator performance is a prerequisite for high plant availability and possible life time extension. The major opponent to that is corrosion and fouling of the heating tubes. Such steam generator degradation problems arise from the continuous ingress of non-volatile contaminants, i.e. corrosion products and salt impurities may accumulate in the steam generators. These impurities have their origin in the secondary side systems. The corrosion products generally accumulate in the steam generators and form deposits not only in the flow restricted areas, such as on top of tube sheet and tube support structure, but also build scales on the steam generator heating tubes. In addition, the tube scales in general affect the steam generator thermal performance, which ultimately causes a reduction of power output. The most effective ways of counteracting all these degradation problems, and thus of improving the steam generator performance is to keep them in clean conditions or, if judged necessary, to plan cleaning measures such as mechanical tube sheet lancing or chemical cleaning. This paper presents a methodology how to assess the cleanliness condition of a steam generator by bringing together all available operational and inspection data such as thermal performance and water chemistry data. By means of this all-inclusive approach the cleanliness condition is quantified in terms of a fouling index. The fouling index allows to monitor the condition of a specific steam generator, compare it to other plants and, finally, to serve as criterion for cleaning measures such as chemical cleaning. The application of the cleanliness criteria and the achieved field results with respect to improvements of steam generator performance will be presented. (author)

Restructuring primary care for performance improvement.

Science.gov (United States)

Fawcett, Kenneth J; Brummel, Stacy; Byrnes, John J

2009-01-01

Primary care practices can no longer consider ongoing quality assessment and management processes to be optional. There are ever-increasing demands from any number of interested parties for objectively measured proof of outcomes and quality of care. Primary Care Partners (PCP), a 16-site ambulatory affiliate of the Spectrum Health system in Grand Rapids, Michigan, began such a continuous quality improvement (CQI) effort in 2005. The intent was to develop an ongoing systematic process that would raise its performance potential and improve patient outcomes in the areas of chronic disease management and preventive services. This article describes the partnerships PCP established, specific benchmarks and measurements used, processes utilized, and results to date. This could be used as a roadmap for other primary care systems that are working to establish CQI in their daily operations.

Improving Immunizations in Children: A Clinical Break-even Analysis.

Science.gov (United States)

Jones, Kyle Bradford; Spain, Chad; Wright, Hannah; Gren, Lisa H

2015-06-01

Immunizing the population is a vital public health priority. This article describes a resident-led continuous quality improvement project to improve the immunization rates of children under 3 years of age at two urban family medicine residency clinics in Salt Lake City, Utah, as well as a break-even cost analysis to the clinics for the intervention. Immunization records were distributed to provider-medical assistant teamlets daily for each pediatric patient scheduled in clinic to decrease missed opportunities. An outreach intervention by letter, followed by telephone call reminders, was conducted to reach children under 3 years of age who were behind on recommended immunizations for age (total n=457; those behind on immunizations n=101). Immunization rates were monitored at 3 months following start of intervention. A break-even analysis to the clinics for the outreach intervention was performed. Immunizations were improved from a baseline of 75.1% (n=133) and 79.6% (n=223) at the two clinics to 92.1% (n=163) and 89.6% (n=251), respectively, at 3 months following the start of intervention (Pbreak-even point required 36 immunizations to be administered. Significant improvement in the immunization rate of patients under 3 years of age at two family medicine residency training clinics was achieved through decreasing missed opportunities for immunization in clinic, and with outreach through letters and follow-up phone calls. The intervention showed positive revenue to both clinics. © 2015 Marshfield Clinic.

Undergraduate medical academic performance is improved by scientific training.

Science.gov (United States)

Zhang, Lili; Zhang, Wei; Wu, Chong; Liu, Zhongming; Cai, Yunfei; Cao, Xingguo; He, Yushan; Liu, Guoxiang; Miao, Hongming

2017-09-01

The effect of scientific training on course learning in undergraduates is still controversial. In this study, we investigated the academic performance of undergraduate students with and without scientific training. The results show that scientific training improves students' test scores in general medical courses, such as biochemistry and molecular biology, cell biology, physiology, and even English. We classified scientific training into four levels. We found that literature reading could significantly improve students' test scores in general courses. Students who received scientific training carried out experiments more effectively and published articles performed better than their untrained counterparts in biochemistry and molecular biology examinations. The questionnaire survey demonstrated that the trained students were more confident of their course learning, and displayed more interest, motivation and capability in course learning. In summary, undergraduate academic performance is improved by scientific training. Our findings shed light on the novel strategies in the management of undergraduate education in the medical school. © 2017 by The International Union of Biochemistry and Molecular Biology, 45(5):379-384, 2017. © 2017 The International Union of Biochemistry and Molecular Biology.

Cloud Computing for Maintenance Performance Improvement

OpenAIRE

Kour, Ravdeep; Karim, Ramin; Parida, Aditya

2013-01-01

Cloud Computing is an emerging research area. It can be utilised for acquiring an effective and efficient information logistics. This paper uses cloud-based technology for the establishment of information logistics for railway system which requires information based on data from different data sources (e.g. railway maintenance, railway operation, and railway business data). In order to improve the performance of the maintenance process relevant data from various sources need to be acquired, f...

Security analysis and improvements to the PsychoPass method.

Science.gov (United States)

Brumen, Bostjan; Heričko, Marjan; Rozman, Ivan; Hölbl, Marko

2013-08-13

In a recent paper, Pietro Cipresso et al proposed the PsychoPass method, a simple way to create strong passwords that are easy to remember. However, the method has some security issues that need to be addressed. To perform a security analysis on the PsychoPass method and outline the limitations of and possible improvements to the method. We used the brute force analysis and dictionary attack analysis of the PsychoPass method to outline its weaknesses. The first issue with the Psychopass method is that it requires the password reproduction on the same keyboard layout as was used to generate the password. The second issue is a security weakness: although the produced password is 24 characters long, the password is still weak. We elaborate on the weakness and propose a solution that produces strong passwords. The proposed version first requires the use of the SHIFT and ALT-GR keys in combination with other keys, and second, the keys need to be 1-2 distances apart. The proposed improved PsychoPass method yields passwords that can be broken only in hundreds of years based on current computing powers. The proposed PsychoPass method requires 10 keys, as opposed to 20 keys in the original method, for comparable password strength.

Enhancing importance-performance analysis

DEFF Research Database (Denmark)

Eskildsen, Jacob Kjær; Kristensen, Kai

2006-01-01

Purpose: The interpretation of the importance/performance map is based on an assumption of independence between importance and performance but many studies question the validity of this assumption. The aim of this research is to develop a new typology for job satisfaction attributes as well...... as a new importance/performance map that can be an aid for organizations when they prioritize their improvement actions based on a job satisfaction study. Design/methodology/approach: A typology for possible relationships between importance and performance in job satisfaction studies is developed based...... on theoretical considerations. This typology is then applied and validated on approximately 10,000 responses from the European Employee Index 2002. Ultimately a new importance/performance map for priority setting in job satisfaction studies is developed based on the new typology for possible relationships...

Optimization of Smart Structure for Improving Servo Performance of Hard Disk Drive

Science.gov (United States)

Kajiwara, Itsuro; Takahashi, Masafumi; Arisaka, Toshihiro

Head positioning accuracy of the hard disk drive should be improved to meet today's increasing performance demands. Vibration suppression of the arm in the hard disk drive is very important to enhance the servo bandwidth of the head positioning system. In this study, smart structure technology is introduced into the hard disk drive to suppress the vibration of the head actuator. It has been expected that the smart structure technology will contribute to the development of small and light-weight mechatronics devices with the required performance. First, modeling of the system is conducted with finite element method and modal analysis. Next, the actuator location and the control system are simultaneously optimized using genetic algorithm. Vibration control effect with the proposed vibration control mechanisms has been evaluated by some simulations.

Performance evaluation and economic analysis of a gas turbine power plant in Nigeria

International Nuclear Information System (INIS)

Oyedepo, S.O.; Fagbenle, R.O.; Adefila, S.S.; Adavbiele, S.A.

2014-01-01

Highlights: • We evaluate performance and economic analysis of a gas turbine power plant in Nigeria. • We examine the shortfall of energy generated and compared with the standard value. • Generation loss resulted in revenue loss of the plant. • Improvement in general housekeeping of the plant will improve performance indices. - Abstract: In this study, performance evaluation and economic analysis (in terms of power outage cost due to system downtime) of a gas turbine power plant in Nigeria have been carried out for the period 2001–2010. The thermal power station consists of nine gas turbine units with total capacity of 301 MW (9 × 31.5 MW). The study reveals that 64.3% of the installed capacity was available in the period. The percentage of shortfall of energy generated in the period ranged from 4.18% to 14.53% as against the acceptable value of 5–10%. The load factor of the plant is between 20.8% and 78.2% as against international best practice of 80%. The average availability of the plant for the period was about 64% as against industry best practice of 95%, while the average use factor was about 92%. The capacity factor of the plant ranged from 20.8% to 78.23% while the utilization factor ranged from 85.47% to 95.82%. For the ten years under review, there was energy generation loss of about 35.7% of expected energy generation of 26.411 TW h with consequent plant performance of 64.3%. The study further reveals that the 35.7% of generation loss resulted in revenue loss of about M$251 (approximately b▪40). The simple performance indicator developed to evaluate the performance indices and outage cost for the station can also be applicable to other power stations in Nigeria and elsewhere. Measures to improve the performance indices of the plant have been suggested such as training of operation and maintenance (O and M) personnel regularly, improvement in O and M practices, proper spare parts inventory and improvement in general housekeeping of the

Performance Analysis of MYSEA

Science.gov (United States)

2012-09-01

Services FSD Federated Services Daemon I&A Identification and Authentication IKE Internet Key Exchange KPI Key Performance Indicator LAN Local Area...spection takes place in different processes in the server architecture. Key Performance Indica- tor ( KPI )s associated with the system need to be...application and risk analysis of security controls. Thus, measurement of the KPIs is needed before an informed tradeoff between the performance penalties

A measure for provisional-and-urgent sanitary improvement in developing countries: septic-tank performance improvement.

Science.gov (United States)

Harada, H; Dong, N T; Matsui, S

2008-01-01

Although many cities have planed to develop sewerages in developing countries, sewerage establishment still requires huge investment and engineering efforts. Improvement of existing sanitation facilities may contribute the betterment of urban sanitation before sewerage establishment. The purpose of this study is to propose a measure to improve urban sanitation in areas where a sewerage development plan is proposed but has not been yet established, based on a case study in Hanoi, Vietnam. We found that 90.5% of human excreta flowed into septic tanks. However, 89.6% of septic tanks have never been desludged in the past and their performance was observed to be at a low level. The study also showed that if they introduce regular desludging with a frequency of once a year, they can eliminate 72.8% of COD loads from septic tanks. It was indicated that the performance can be dramatically recovered by regular desludging, which could contribute urban sanitation improvement in Hanoi. In conclusion, the performance recovery of septic tanks by regular desludging was proposed as a provisional-and-urgent measure for urban sanitation improvement, together with the septage treatment in sewage sludge treatment facilities, which should be established earlier than other facilities of sewage treatment systems. IWA Publishing 2008.

Supplier selection or collaboration? Determining factors of performance improvement when outsourcing manufacturing

OpenAIRE

Dabhilkar, Mandar; Bengtsson, Lars; Haartman, Robin von; Åhlström, Pär

2009-01-01

An empirical study was designed to determine factors of performance improvement when outsourcing manufacturing. Findings from a survey of 136 manufacturing plants in Sweden show that most of them achieve their outsourcing motives, but not without trade-offs. Factors of performance improvements such as economies of scale or operations in low-cost countries can improve one performance dimension, such as product cost, yet negatively impact volume flexibility, speed or product innovation. The res...

Improvement of Wind Farm Performance by Means of Spinner Anemometry

DEFF Research Database (Denmark)

Friis Pedersen, Troels; Demurtas, Giorgio; Gottschall, Julia

This report is a project report on the EUDP research project SpinnerFarm. The objectives of the project were to improve software and hardware on the spinner anemometer concept and to demonstrate improvement of wind farm performance by opitmized yaw control. The hardware was improved by a more...

Size-based scheduling to improve web performance

NARCIS (Netherlands)

Harchol-Balter, M.; Schroeder, B.; Bansal, N.; Agrawal, M.

2003-01-01

Is it possible to reduce the expected response time of every request at a web server, simply by changing the order in which we schedule the requests? That is the question we ask in this paper.This paper proposes a method for improving the performance of web servers servicing static HTTP requests.

Can Near-Peer Teaching Improve Academic Performance?

Science.gov (United States)

Williams, Brett; Fowler, James

2014-01-01

Near peer teaching is becoming increasingly popular within healthcare education. The experiences and effects of near-peer teaching upon the near-peer teachers' academic performance are poorly understood. In order to address this, the objective of this study was to examine whether a near-peer teaching program improved the overall clinical unit…

Planning and Analysis of the Company’s Financial Performances by Using a Software Simulation

Directory of Open Access Journals (Sweden)

Meri BOSHKOSKA

2017-06-01

Full Text Available Information Technology includes a wide range of software solution that helps managers in decision making processes in order to increase the company's business performance. Using software solution in financial analysis is a valuable tool for managers in the financial decision making process. The objective of the study was accomplished by developing Software that easily determines the financial performances of the company through integration of the analysis of financial indicators and DuPont profitability analysis model. Through this software, managers will be able to calculate the current financial state and visually analyze how their actions will affect the financial performance of the company. This will enable them to identify the best ways to improve the financial performance of the company. The software can perform a financial analysis and give a clear, useful overview of the current business performance and can also help in planning the growth of the company. The Software can also be implemented in educational purposes for students and managers in the field of financial management.

Improving Performances in the Public Sector: The Scientific ...

African Journals Online (AJOL)

Improving Performances in the Public Sector: The Scientific Management Theory ... adopts the principles for enhanced productivity, efficiency and the attainment of ... of the public sector, as observed and reported by several scholars over time.

Improving Fan System Performance: A Sourcebook for Industry

Energy Technology Data Exchange (ETDEWEB)

2003-04-01

This is one of a series of sourcebooks on motor-driven equipment produced by the Industrial Technologies Program. It provides a reference for industrial fan systems users, outlining opportunities to improve fan system performance.

Warehousing performance improvement using Frazelle Model and per group benchmarking: A case study in retail warehouse in Yogyakarta and Central Java

Directory of Open Access Journals (Sweden)

Kusrini Elisa

2018-01-01

Full Text Available Warehouse performance management has an important role in improving logistic's business activities. Good warehouse management could increase profit, time delivery, quality and customer service. This study is conducted to assess performance of retail warehouses in some supermarket located in Central Java and Yogyakarta. Performance improvement is proposed base on the warehouse measurement using Frazelle model (2002, that measure on five indicators, namely Financial, Productivity, Utility, Quality and Cycle time along five business process in warehousing, i.e. Receiving, Put Away, Storage, Order picking and shipping. In order to obtain more precise performance, the indicators are weighted using Analytic Hierarchy Analysis (AHP method. Then, warehouse performance are measured and final score is determined using SNORM method. From this study, it is found the final score of each warehouse and opportunity to improve warehouse performance using peer group benchmarking

Improvement of tokamak performance by injection of electrons

International Nuclear Information System (INIS)

Ono, Masayuki.

1992-12-01

Concepts for improving tokamak performance by utilizing injection of hot electrons are discussed. Motivation of this paper is to introduce the research work being performed in this area and to refer the interested readers to the literature for more detail. The electron injection based concepts presented here have been developed in the CDX, CCT, and CDX-U tokamak facilities. The following three promising application areas of electron injection are described here: 1. Non-inductive current drive, 2. Plasma preionization for tokamak start-up assist, and 3. Charging-up of tokamak flux surfaces for improved plasma confinement. The main motivation for the dc-helicity injection current drive is in its efficiency that, in theory, is independent of plasma density. This property makes it attractive for driving currents in high density reactor plasmas

Selection of Strategy Positioning and Formulation Strategies for Improving Business Performance of Bakery XYZ

OpenAIRE

Siregar, Yigal Allon; Toha, Mohamad

2012-01-01

Economic growth will increase competition among companies in industry, and it happen in Bandung area, with current growth in economic and tourism industry also influence competition level in culinary business in Bandung. Bakery XYZ, that already in Bandung since 1991 affected of the current competition in culinary business. Currently Bakery XYZ is facing decreasing sales volume due to increasing competitors. To improve its business performance, is required to analysis Bakery XYZ's business s...

Management of Industrial Performance Indicators: Regression Analysis and Simulation

Directory of Open Access Journals (Sweden)

Walter Roberto Hernandez Vergara

2017-11-01

Full Text Available Stochastic methods can be used in problem solving and explanation of natural phenomena through the application of statistical procedures. The article aims to associate the regression analysis and systems simulation, in order to facilitate the practical understanding of data analysis. The algorithms were developed in Microsoft Office Excel software, using statistical techniques such as regression theory, ANOVA and Cholesky Factorization, which made it possible to create models of single and multiple systems with up to five independent variables. For the analysis of these models, the Monte Carlo simulation and analysis of industrial performance indicators were used, resulting in numerical indices that aim to improve the goals’ management for compliance indicators, by identifying systems’ instability, correlation and anomalies. The analytical models presented in the survey indicated satisfactory results with numerous possibilities for industrial and academic applications, as well as the potential for deployment in new analytical techniques.

Decomposition of the Mean Squared Error and NSE Performance Criteria: Implications for Improving Hydrological Modelling

Science.gov (United States)

Gupta, Hoshin V.; Kling, Harald; Yilmaz, Koray K.; Martinez-Baquero, Guillermo F.

2009-01-01

The mean squared error (MSE) and the related normalization, the Nash-Sutcliffe efficiency (NSE), are the two criteria most widely used for calibration and evaluation of hydrological models with observed data. Here, we present a diagnostically interesting decomposition of NSE (and hence MSE), which facilitates analysis of the relative importance of its different components in the context of hydrological modelling, and show how model calibration problems can arise due to interactions among these components. The analysis is illustrated by calibrating a simple conceptual precipitation-runoff model to daily data for a number of Austrian basins having a broad range of hydro-meteorological characteristics. Evaluation of the results clearly demonstrates the problems that can be associated with any calibration based on the NSE (or MSE) criterion. While we propose and test an alternative criterion that can help to reduce model calibration problems, the primary purpose of this study is not to present an improved measure of model performance. Instead, we seek to show that there are systematic problems inherent with any optimization based on formulations related to the MSE. The analysis and results have implications to the manner in which we calibrate and evaluate environmental models; we discuss these and suggest possible ways forward that may move us towards an improved and diagnostically meaningful approach to model performance evaluation and identification.

Public sector benchmarking and performance improvement : what is the link and can it be improved?

NARCIS (Netherlands)

Tillema, Sandra

2010-01-01

Benchmarking is often used in the public sector as a way of driving up performance. This article explains why benchmarking does not necessarily lead to better performance and why it can generate unwanted consequences. The article recommends ways of improving the link between benchmarking and

DEVELOPMENT OF PERFORMANCE MODEL FOR QUALITY AND PROCESS IMPROVEMENT IN BUSINESS PROCESS SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

Samson Oludapo

2017-06-01

Full Text Available When it comes to performance improvement process, literature abounds with lean, agile and lean-agile. Over the years, the implementation of the improvement processes of lean and agile had met with resounding success in the manufacturing, production, and construction industry. For this reason, there is an interest to develop a performance process for business process service industry incorporating the key aspect of lean and agile theory extracted from the extant literature. The researcher reviewed a total of 750 scholarly articles, grouped them according to the relationship to central theme - lean or agile, and thereafter uses factor analysis under principal component method to explain the relationship of the items. The result of this study showed that firms focusing on cost will minimize the investment of resources in business operations this, in turn, will lead to difficulties in responding to changing customer's requirements in terms of volume, delivery, and new product. The implication is that on the long run cost focus strategy negatively influence flexibility.

Application of superconducting magnet energy storage to improve power system dynamic performance

International Nuclear Information System (INIS)

Mitani, Y.; Tsuji, K.; Murakami, Y.

1988-01-01

The application of Superconducting Magnet Energy Storage (SMES) to the stabilization of a power system with long distance bulk power transmission lines which has the problem of poorly damped power oscillations, is presented. Control schemes for stabilization using SMES which is capable of controlling active and reactive power simultaneously in four quadrant ranges, is proposed. The effective locations and the necessary capacities of SMES for power system stabilizing control are discussed in detail. Results of numerical analysis and experiments in an artificial power transmission system demonstrate the significant effect of the control by SMES on the improvement of power system oscillatory performance

Learning to improve: using writing to increase critical thinking performance in general education biology.

Science.gov (United States)

Quitadamo, Ian J; Kurtz, Martha J

2007-01-01

Increasingly, national stakeholders express concern that U.S. college graduates cannot adequately solve problems and think critically. As a set of cognitive abilities, critical thinking skills provide students with tangible academic, personal, and professional benefits that may ultimately address these concerns. As an instructional method, writing has long been perceived as a way to improve critical thinking. In the current study, the researchers compared critical thinking performance of students who experienced a laboratory writing treatment with those who experienced traditional quiz-based laboratory in a general education biology course. The effects of writing were determined within the context of multiple covariables. Results indicated that the writing group significantly improved critical thinking skills whereas the non-writing group did not. Specifically, analysis and inference skills increased significantly in the writing group but not the non-writing group. Writing students also showed greater gains in evaluation skills; however, these were not significant. In addition to writing, prior critical thinking skill and instructor significantly affected critical thinking performance, whereas other covariables such as gender, ethnicity, and age were not significant. With improved critical thinking skill, general education biology students will be better prepared to solve problems as engaged and productive citizens.

Thermal diagnostics in power plant to improve performance

International Nuclear Information System (INIS)

Meister, H.

1995-01-01

The improvement of older power plants by changing poor performing components is a cost effective method to increase the capacity of the units. The necessary information for the detection of components that are to be replaced can be obtained from heat rate and component tests with accuracy instrumentation. The discussed methods and tools provided by ABB Were used with success in several power plants in Europe. These tools are in the process of permanent improvement and can be used in almost any type of power plant. Due to the reasons discussed above, there is a high potential for improvement of a lot of power plants in the next decade. (author)

Can action research strengthen district health management and improve health workforce performance? A research protocol.

Science.gov (United States)

Mshelia, C; Huss, R; Mirzoev, T; Elsey, H; Baine, S O; Aikins, M; Kamuzora, P; Bosch-Capblanch, X; Raven, J; Wyss, K; Green, A; Martineau, T

2013-08-30

The single biggest barrier for countries in sub-Saharan Africa (SSA) to scale up the necessary health services for addressing the three health-related Millennium Development Goals and achieving Universal Health Coverage is the lack of an adequate and well-performing health workforce. This deficit needs to be addressed both by training more new health personnel and by improving the performance of the existing and future health workforce. However, efforts have mostly been focused on training new staff and less on improving the performance of the existing health workforce. The purpose of this paper is to disseminate the protocol for the PERFORM project and reflect on the key challenges encountered during the development of this methodology and how they are being overcome. The overall aim of the PERFORM project is to identify ways of strengthening district management in order to address health workforce inadequacies by improving health workforce performance in SSA. The study will take place in three districts each in Ghana, Tanzania and Uganda using an action research approach. With the support of the country research teams, the district health management teams (DHMTs) will lead on planning, implementation, observation, reflection and redefinition of the activities in the study. Taking into account the national and local human resource (HR) and health systems (HS) policies and practices already in place, 'bundles' of HR/HS strategies that are feasible within the context and affordable within the districts' budget will be developed by the DHMTs to strengthen priority areas of health workforce performance. A comparative analysis of the findings from the three districts in each country will add new knowledge on the effects of these HR/HS bundles on DHMT management and workforce performance and the impact of an action research approach on improving the effectiveness of the DHMTs in implementing these interventions. Different challenges were faced during the development of

Exergy Analysis of a Subcritical Refrigeration Cycle with an Improved Impulse Turbo Expander

Directory of Open Access Journals (Sweden)

Zhenying Zhang

2014-08-01

Full Text Available The impulse turbo expander (ITE is employed to replace the throttling valve in the vapor compression refrigeration cycle to improve the system performance. An improved ITE and the corresponding cycle are presented. In the new cycle, the ITE not only acts as an expansion device with work extraction, but also serves as an economizer with vapor injection. An increase of 20% in the isentropic efficiency can be attained for the improved ITE compared with the conventional ITE owing to the reduction of the friction losses of the rotor. The performance of the novel cycle is investigated based on energy and exergy analysis. A correlation of the optimum intermediate pressure in terms of ITE efficiency is developed. The improved ITE cycle increases the exergy efficiency by 1.4%–6.1% over the conventional ITE cycle, 4.6%–8.3% over the economizer cycle and 7.2%–21.6% over the base cycle. Furthermore, the improved ITE cycle is also preferred due to its lower exergy loss.

Improved signal analysis for motional Stark effect data

International Nuclear Information System (INIS)

Makowski, M.A.; Allen, S.L.; Ellis, R.; Geer, R.; Jayakumar, R.J.; Moller, J.M.; Rice, B.W.

2005-01-01

Nonideal effects in the optical train of the motional Stark effect diagnostic have been modeled using the Mueller matrix formalism. The effects examined are birefringence in the vacuum windows, an imperfect reflective mirror, and signal pollution due to the presence of a circularly polarized light component. Relations for the measured intensity ratio are developed for each case. These relations suggest fitting functions to more accurately model the calibration data. One particular function, termed the tangent offset model, is found to fit the data for all channels better than the currently used tangent slope function. Careful analysis of the calibration data with the fitting functions reveals that a nonideal effect is present in the edge array and is attributed to nonideal performance of a mirror in that system. The result of applying the fitting function to the analysis of our data has been to improve the equilibrium reconstruction

An exergy method for compressor performance analysis

Energy Technology Data Exchange (ETDEWEB)

McGovern, J A; Harte, S [Trinity Coll., Dublin (Ireland)

1995-07-01

An exergy method for compressor performance analysis is presented. The purpose of this is to identify and quantify defects in the use of a compressor`s shaft power. This information can be used as the basis for compressor design improvements. The defects are attributed to friction, irreversible heat transfer, fluid throttling, and irreversible fluid mixing. They are described, on a common basis, as exergy destruction rates and their locations are identified. The method can be used with any type of positive displacement compressor. It is most readily applied where a detailed computer simulation program is available for the compressor. An analysis of an open reciprocating refrigeration compressor that used R12 refrigerant is given as an example. The results that are presented consist of graphs of the instantaneous rates of exergy destruction according to the mechanisms involved, a pie chart of the breakdown of the average shaft power wastage by mechanism, and a pie chart with a breakdown by location. (author)

Millisecond photo-thermal process on significant improvement of supercapacitor’s performance

International Nuclear Information System (INIS)

Wang, Kui; Wang, Jixiao; Wu, Ying; Zhao, Song; Wang, Zhi; Wang, Shichang

2016-01-01

Graphical abstract: A high way for charge transfer is created by a millisecond photo-thermal process which could decrease contact resistance among nanomaterials and improve the electrochemical performances. - Highlights: • Improve conductivity among nanomaterials with a millisecond photo-thermal process. • The specific capacitance can increase about 25% with an photo-thermal process. • The circle stability and rate capability can be improved above 10% with photo-thermal process. • Provide a new way that create electron path to improve electrochemical performance. - Abstract: Supercapacitors fabricated with nanomaterials usually have high specific capacitance and excellent performance. However, the small size of nanomaterials renders a considerable limitation of the contact area among nanomaterials, which is harmful to charge carrier transfer. This fact may hinder the development and application of nanomaterials in electrochemical storage systems. Here, a millisecond photo-thermal process was introduced to create a charge carries transfer path to decrease the contact resistance among nanomaterials, and enhance the electrochemical performance of supercapacitors. Polyaniline (PANI) nanowire, as a model nanomaterial, was used to modify electrodes under different photo-thermal process conditions. The modified electrodes were characterized by scanning electronic microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and the results were analysed by equivalent circuit simulation. These results demonstrate that the photo-thermal process can alter the morphology of PANI nanowires, lower the charge transfer resistances and thus improve the performance of electrodes. The specific capacitance increase of the modified electrodes is about 25%. The improvement of the circle stability and rate capability are above 10%. To the best of our knowledge, this is the first attempt on research the effect of photo-thermal process on the conductivity

Performance Analysis of Receive Diversity in Wireless Sensor Networks over GBSBE Models