Synthesis of tracers using automated radiochemistry and robotics

International Nuclear Information System (INIS)

Dannals, R.F.

1992-07-01

Synthesis of high specific activity radiotracers labeled with short-lived positron-emitting radionuclides for positron emission tomography (PET) often requires handling large initial quantities of radioactivity. High specific activities are required when preparing tracers for use in PET studies of neuroreceptors. A fully automated approach for tracer synthesis is highly desirable. This proposal involves the development of a system for the Synthesis of Tracers using Automated Radiochemistry and Robotics (STARR) for this purpose. While the long range objective of the proposed research is the development of a totally automated radiochemistry system for the production of major high specific activity 11 C-radiotracers for use in PET, the specific short range objectives are the automation of 11 C-methyl iodide ( 11 CH 3 I) production via an integrated approach using both radiochemistry modular labstations and robotics, and the extension of this automated capability to the production of several radiotracers for PET (initially, 11 C-methionine, 3-N-[ 11 C-methyl]spiperone, and [ 11 C]-carfentanil)

PC-based input/output controllers from a VME perspective

International Nuclear Information System (INIS)

Hill, J.O.

1999-01-01

The Experimental Physics and Industrial Control System (EPICS) has been widely adopted in the accelerator community. Although EPICS is available on many platforms, the majority of sites have deployed VME- or VXI-based input output controllers running the vxWorks real time operating system. Recently, a hybrid approach using vxWorks on both PC and traditional platforms is being implemented at LANL. To illustrate these developments the author compares his recent experience deploying PC-based EPICS input output controllers with experience deploying similar systems based on traditional EPICS platforms

A PC-PCL-based control system for the high-voltage pulsed-power operation of the Intense Diagnostic Neutral Beam (IDNB) Experiment

International Nuclear Information System (INIS)

Gribble, R.

1993-06-01

A stand-alone, semiautomated control system for the high-voltage pulsed-power energy sources on the Intense Diagnostic Neutral Beam Experiment at Los Alamos National Laboratory using personal computer (PC) and programmable logic controller (PLC) technology has been developed and implemented. The control system, consisting of a PC with the graphic operator interface, the network connecting the PC to the PLC, the PLC, the PLC I/O modules, fiber-optic interfaces and software, is described

Radiochemistry Education and Research Program at the Pennsylvania State University

International Nuclear Information System (INIS)

Uenlue, Kenan

2009-01-01

A new Radiochemistry Education and Research Program was started at the Pennsylvania University, Radiation Science and Engineering Center. The program was initially supported by the Department of Energy, Radiochemistry Education Award Program (REAP). Using REAP funding as leverage we obtained support from the Los Alamos National Laboratory, Department of Homeland Security, Domestic Nuclear Detection Office, various internal funding from PSU and other entities. The PSU radiochemistry program primarily addresses radiochemistry education and secondarily nuclear and radiochemistry research. The education program consists of bolstering our existing radiochemistry and related courses; Nuclear and Radiochemistry, Radiation Detection and Measurement, Radiological Safety and developing new courses, e.g., Laboratory Experiments in Applied Nuclear and Radiochemistry, and Nuclear Methods in Science. A new laboratory has been created with state of the art equipment for the Laboratory Experiments in Applied Nuclear and Radiochemistry course. We also plan to revitalize the nuclear and radiochemistry research programs. We established a state-of-the-art Neutron Activation Analysis Laboratory and a gamma ray spectroscopy laboratory that has 10 stations including state-of-the-art nuclear spectroscopy hardware and software. In addition, we embarked on an expansion plan that included building a new neutron beam hall and neutron beam ports with a cold neutron source. One of the reasons to have a cold neutron source is for the development of a prompt gamma activation analysis facility. A detailed description of PSU radiochemistry education and research program will be given and the future plans will be discussed.

Education of radiochemistry in the University of Helsinki, Finland

International Nuclear Information System (INIS)

Lehto, J.

2005-01-01

Laboratory of Radiochemistry is one of the seven laboratories in the Department of Chemistry, University of Helsinki. In the department there are altogether 220 employees of which 25 work in the Laboratory of Radiochemistry. Laboratory of Radiochemistry is the only radiochemical institute within Finnish universities. It gives teaching in a wide range of topics including most areas of radiochemistry. Teaching in radiochemistry is given at the master's level. Prior to taking radiochemistry as their major students have studied two to three years of chemistry and other fields of sciences. Compulsory courses in radiochemistry are: (1) Principles of radioactivity and radiochemistry (8 credit units), includes two weeks' laboratory course. (2) Radiation safety (2 cu), includes one day laboratory work. (3) Detection and measurement of radiation (5 cu), includes two weeks' laboratory course. (4) Chemistry and analysis of radionuclides (5 cu), includes two weeks' laboratory course. There are several optional courses of which students have to take at least three: (1) Chemistry of the nuclear fuel cycle (3 cu), students write an essay. (2) Environmental radioactivity (3 cu), students write an essay and give a seminar lecture. (3) Radiopharmaceutical chemistry (3 cu), includes one week laboratory course. (4) Radioactive tracer techniques (3 cu), includes one week laboratory course. (5) Radiation chemistry (3 cu), includes one week laboratory course. (6) Chemistry of uranium series in the environment (3 cu). (7) Atmospheric radioactivity (3 cu), students write an essay. After finalising the required radiochemistry courses, and other studies (40 cu), students make their project work and write a master's thesis (together 40 cu). Project work and master's thesis are done in one of the research projects of the laboratory. The research projects are working in the following fields: 1) migration and retention of radionuclides in the geo sphere, 2) selective separation of radionuclides

Education of radiochemistry in the University of Helsinki, Finland

International Nuclear Information System (INIS)

Lehto, J.

2005-01-01

Laboratory of Radiochemistry is one of the seven laboratories in the Department of Chemistry, University of Helsinki. In the department there are altogether 220 employees of which 25 work in the Laboratory of Radiochemistry. Laboratory of Radiochemistry is the only radiochemical institute within Finnish universities. It gives teaching in a wide range of topics including most areas of radiochemistry. Teaching in radiochemistry is given at the master's level. Prior to taking radiochemistry as their major students have studied two to three years of chemistry and other fields of sciences. Compulsory courses in radiochemistry are: Principles of radioactivity and radiochemistry (8 credit units), includes two weeks' laboratory course. Radiation safety (2 cu), includes one day laboratory work. Detection and measurement of radiation (5 cu), includes two weeks' laboratory course. Chemistry and analysis of radionuclides (5 cu), includes two weeks' laboratory course There are several optional courses of which students have to take at least three: Chemistry of the nuclear fuel cycle (3 cu), students write an essay. Environmental radioactivity (3 cu), students write an essay and give a seminar lecture. Radiopharmaceutical chemistry (3 cu), includes one week laboratory course. Radioactive tracer techniques (3 cu), includes one week laboratory course. Radiation chemistry (3 cu), includes one week laboratory course. Chemistry of uranium series in the environment (3 cu). Atmospheric radioactivity (3 cu), students write an essay. After finalising the required radiochemistry courses, and other studies (40 cu), students make their project work and write a master's thesis (together 40 cu). Project work and master's thesis are done in one of the research projects of the laboratory. The research projects are working in the following fields: 1) migration and retention of radionuclides in the geo sphere, 2) selective separation of radionuclides from nuclear waste effluents, 3

PC based 8-parameter data acquisition system

International Nuclear Information System (INIS)

Gupta, J.D.; Naik, K.V.; Jain, S.K.; Pathak, R.V.; Suman, B.

1989-01-01

Multiparameter data acquisition (MPA) systems which analyse nuclear events with respect to more than one property of the event are essential tools for the study of some complex nuclear phenomena requiring analysis of time coincident spectra. For better throughput and accuracy each parameter is digitized by its own ADC. A stand alone low cost IBM PC based 8-parameter data acquisition system developed by the authors makes use of Address Recording technique for acquiring data from eight 12 bit ADC's in the PC Memory. Two memory buffers in the PC memory are used in ping-pong fashion so that data acquisition in one bank and dumping of data onto PC disk from the other bank can proceed simultaneously. Data is acquired in the PC memory through DMA mode for realising high throughput and hardware interrupt is used for switching banks for data acquisition. A comprehensive software package developed in Turbo-Pascal offers a set of menu-driven interactive commands to the user for setting-up system parameters and control of the system. The system is to be used with pelletron accelerator. (author). 5 figs

Radiochemistry and actinide chemistry

International Nuclear Information System (INIS)

Guillaumont, R.; Peneloux, A.

1989-01-01

The analysis of trace amounts of actinide elements by means of radiochemistry, is discussed. The similarities between radiochemistry and actinide chemistry, in the case of species amount by cubic cm below 10 12 , are explained. The parameters which allow to define what are the observable chemical reactions, are given. The classification of radionuclides in micro or macrocomponents is considered. The validity of the mass action law and the partition function in the definition of the average number of species for trace amounts, is investigated. Examples illustrating the results are given

Design of multichannel counting system for IBM PC and compatibles

International Nuclear Information System (INIS)

Majeed, B.; Ahmad, Z.; Osman, A.; Ysain, M.M.

1995-07-01

A Multichannel Counting System (MCCS), based on IBM-PC and compatible computer systems have been designed. The MCCS consists of a Multichannel Counting System plug-in interface card (MCCS-PC) for IBM PC and compatibles and a NIM-BIN module (MCCS-NB). The MCCS-PC provides simultaneous monitoring of upto seven independent SCA type inputs. An on board programmable timer provides elapsed time measurement. A menu-driven program for data acquisition and timer control has also been developed. (author) 8 figs

Parallel Task Processing on a Multicore Platform in a PC-based Control System for Parallel Kinematics

Directory of Open Access Journals (Sweden)

Harald Michalik

2009-02-01

Full Text Available Multicore platforms are such that have one physical processor chip with multiple cores interconnected via a chip level bus. Because they deliver a greater computing power through concurrency, offer greater system density multicore platforms provide best qualifications to address the performance bottleneck encountered in PC-based control systems for parallel kinematic robots with heavy CPU-load. Heavy load control tasks are generated by new control approaches that include features like singularity prediction, structure control algorithms, vision data integration and similar tasks. In this paper we introduce the parallel task scheduling extension of a communication architecture specially tailored for the development of PC-based control of parallel kinematics. The Sche-duling is specially designed for the processing on a multicore platform. It breaks down the serial task processing of the robot control cycle and extends it with parallel task processing paths in order to enhance the overall control performance.

Facilitating the design and operation of computer-controlled radiochemistry synthesizers with an open-quotes Electronic Toolboxclose quotes

International Nuclear Information System (INIS)

Feliu, A.L.

1991-01-01

Positron emission tomography (PET) is a non-invasive diagnostic imaging technique requiring rapid and reliable radiopharmaceutical production. Automated systems offer a host of potential advantages over manually or remotely operated apparatus, including reduced personnel requirements, lower radiation exposure to personel, reliable yields, and reproducible product purity. However, the burden of routine radiopharmaceutical production most often remains a labor-intensive responsibility of highly trained radiochemists. In order to ease the transition between manual, remote-controlled, and computer-controlled radiochemical synthesis, an electronic toolbox with graphical user interface was developed as a generic process control system compatible with a variety of common radiochemical operations. This work is specifically aimed to make automated techniques more accessible by emphasizing the similarities between manual and automated chemistry and by minimizing the computer programming effort required. This paper discusses the structural elements of the electronic toolbox approach to radiochemistry process control, and its ramifications for the designers and end-users of automated synthesizers

The measure and control system of mini-type radon room based on PC104

International Nuclear Information System (INIS)

Zhou Shumin; East China Inst. of Technology, Fuzhou; Tang Bin; Sun Yamin

2005-01-01

Radon room is one of the standard equipment which demarcates radon measure instrument. The paper discusses the dynamic method and mathematic model which keeps the radon consistence stability in radon room. The system is developed on PC104. The system can monitor the radon consistence and replenishment radon according the radon control parameter. (authors)

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators control system

OpenAIRE

Van den Eynden, M

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete Xenix PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specificatio...

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators control system

CERN Document Server

Van den Eynden, M

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete Xenix PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specification for the new PowerPC technology, the re-engineering aspects, the interfaces with other CERN wide projects, and the set up of a development environment. This project offers also support for other major SPS and LEP projects interested in the PowerPC microprocessor technology.

Radiochemistry

International Nuclear Information System (INIS)

Urch, D.S.

1991-01-01

This section of Annual Reports will review recent developments in those branches of chemistry where nuclear transformations are of importance, but will exclude a consideration of the general chemical properties of elements that happen to be radioactive or of radiation chemistry. Much of the review will, be devoted to progress in the preparation of molecules of increasing complexity, labelled with short-lived positron emitting isotopes. A book, New Trends in Radiopharmaceutical Synthesis, Quality Assurance and Regulatory Control has appeared. Trends in the teaching of radiochemistry were considered at a recent meeting of the American Chemical Society. Concern was voiced about the current status of radio- and nuclear-chemistry education. There will be an increasing need for trained radiochemists and it is necessary to ensure that the topic is introduced into the school science curriculum. Failure in the hunt for the elusive 'super-heavy' elements is discussed in 'Elements beyond Uranium'. (author)

Radiochemistry days

International Nuclear Information System (INIS)

1998-09-01

This document provides the 44 papers (transparencies used during the presentations and posters) presented at the Radiochemistry Days, held September 3-4, 1998 in Nantes, France. The main studied topics were problematic questions concerning the nuclear fuel cycle and in particular the management, storage of radioactive wastes and the environmental impact. (O.M.)

Radiochemistry

International Nuclear Information System (INIS)

Urch, D.S.

1988-01-01

Annual Reports will review the following topics: techniques for the preparation of specific isotopes; the reactions initiated by atoms and ions produced by nuclear reactions, including nuclear decay but omitting radiation chemistry; methods for the preparation of labelled molecules; environmental aspects of radiochemistry; and finally some miscellaneous items. The general chemistry of those elements that happen to be radioactive or those reactions that happen to involve radioactive isotopes will not be considered here. (author)

Analytical results of radiochemistry of the JRR-3M

International Nuclear Information System (INIS)

Yoshijima, Tetsuo; Tanaka, Sumitoshi

1997-07-01

The JRR-3 was modified for upgrading to enhance the experimental capabilities in 1990 as JRR-3M. JRR-3M is pool type research reactor, moderated and cooled by light water with a maximum thermal power of 20 MWt and a thermal neutron flux of about 2x10 14 n/cm 2 ·sec. The core internal structure and fuel cladding tube is made by aluminum alloy. The cooling systems are composed of primary cooling system, secondary cooling system, heavy water reflector system and helium gas system. The primary piping system, reactor pool and heavy water reflector system is constructed of type 304 stainless steel. The main objectives of radiochemistry are check the general corrosion of structural materials and detection of failed fuel elements for safe operation of reactor plant. In this report analytical results of radiochemistry and evaluation of radionuclides of cooling systems in the JRR-3M are described. (author)

Multi drop bus controller for IBM PC/AT

International Nuclear Information System (INIS)

Bardik, Yu.I.; Kalistratov, E.N.; Matyushin, A.A.; Obukhov, G.A.; Trofimov, N.N.

1993-01-01

The module PC-AT-PBC gives a possibility to create a working place based on the computer IBM PC/AT for testing of hardware which is compatible with the multi drop bus. The KP1830BE31 micro program change turns the module into timing generator for power supply controllers of the UNK correction system. The structure of the module, functional parts, library functions and two application programs have been described. 4 refs., 9 figs

Automated IBM PC/XT/AT based measurement and control system for the DRON-3M X-ray diffractometer

International Nuclear Information System (INIS)

Tulaev, A.B.

1989-01-01

An automated IBM PC/XT/AT based measurement and control system for the DRON-3M X-ray diffractometer is decribed. The system permits carrying out of real time diffractometer control automatic X-spectra measurement and data acquisition, as well as experimental information computing and representation. The electronic of the system consists of a CAMAC crate with analog and power modules, and a control and measurement organization module, performed as a single bord in the standard of PC electronics. The system provides X-spectra acquisition with volume up to 4K in the angle range from 100 to 160 degrees with a resolution of 0.01 degree, a dead time less than 1mks and an exposition time from tenths of a second to dozens of minutes. 3 refs.; 5 figs

Radiochemistry teaching and research activities in Brazil

International Nuclear Information System (INIS)

Vasconcellos, M.B.A.; Saiki, M.

2006-01-01

Much concern has been expressed lately about the decline of teaching and research activities in radiochemistry in many countries, as was discussed in an IAEA Technical Meeting in Antalya, Turkey, in 2002, and also at MTAA-11 in Guildford, UK. In the IAEA meeting, a survey was presented about the current situation in different regions of the world (Eastern Europe, East and West Asia, Africa, North America and Latin America) by experts of each region. In the case of Brazil, which has nuclear research reactors and also cyclotrons in operation, the teaching and research activities in radiochemistry are concentrated in the three main institutes of the Brazilian Nuclear Energy Commission, in the University of Sao Paulo and in other universities, in different regions of the country. In the present paper, a closer look is given to the radiochemistry teaching and research activities that are being conducted nowadays in Brazil, comprising: number of radiochemistry courses and students being formed, main research areas being conducted, as well as research and production of radioisotopes for nuclear medicine, using nuclear reactors and cyclotrons. (author)

Radiochemistry programme biennial progress report (1986 and 1987)

International Nuclear Information System (INIS)

1988-01-01

This biennial report covers the calendar years 1986 and 1987. This period has seen significant growth in the research activities of the Radiochemistry Programme and this is reflected in this report. The report is organised subject-wise into sections dealing with Fuel Chemistry and Thermodynamics, Sodium Chemistry, Analytical Chemistry and Instrumentation. The major part of the activities of the Radiochemistry Programme relates to fuel chemistry including thermophysical and thermodynamic properties of fuel materials, chemistry of fuel reprocessing and facilities as well as techniques for post-irradiation studies. Sodium chemistry is a smaller but important R and D activity, which has reached full maturity during the period of this report. Analytical chemistry and instrumentation are essential supporting activities. The rapid progress made over the last two years are reflected in the number of items covered in this report. In order to keep the total length of this report under control, the editors had to restrict the individual activities to one or two pages. Though the details of various studies are not presented here, it is hoped that the report gives an overview of the progress made by the Radiochemistry Programme in the last two years. The list of publications given at the end also reflects the growth in research programmes. (author)

The operational benefits of integrated PC control of gamma irradiation plants

International Nuclear Information System (INIS)

Comben, M.; Stephens, P.

1998-01-01

Compared with the traditional PLC control systems used on many gamma irradiation plants, the semi-intelligent decision making capabilities of a fully integrated PC control system can bring many benefits to the plant operator. The authors will describe how plant operation is fully automatic with the PC control providing all the input-output data required to run the plant efficiently and safely. Detailed product tracking, with live on-screen data, can be incorporated to give both plant operator and product manufacturer complete confidence in the irradiation process. Advanced features such as on-line diagnostics and mechanical part failure prediction are also described. Also available is automated dosimetry, reducing the opportunity for human error, whilst at the same time saving on staff costs and providing highly professional dose validation reports and comprehensive routine dosimetry documentation. The benefits of PURIDEC's PC control system are not only available with its new plants. The system can be supplied as an upgrade to plants of all ages and design giving the current operator all the benefits described in the paper

The Nuclear and Radiochemistry in Chemistry Education Curriculum Project

International Nuclear Information System (INIS)

Robertson, J.D.; Missouri University, Columbia, MO; Kleppinger, E.W.

2005-01-01

Given the mismatch between supply of and demand for nuclear scientists, education in nuclear and radiochemistry has become a serious concern. The Nuclear and Radiochemistry in Chemistry Education (NRIChEd) Curriculum Project was undertaken to reintroduce the topics normally covered in a one-semester radiochemistry course into the traditional courses of a four-year chemistry major: general chemistry, organic chemistry, quantitative and instrumental analysis, and physical chemistry. NRIChEd uses a three-pronged approach that incorporates radiochemistry topics when related topics in the basic courses are covered, presents special topics of general interest as a vehicle for teaching nuclear and radiochemistry alongside traditional chemistry, and incorporates the use of non-licensed amounts of radioactive substances in demonstrations and student laboratory experiments. This approach seeks not only to reestablish nuclear science in the chemistry curriculum, but to use it as a tool for elucidating fundamental and applied aspects of chemistry as well. Moreover, because of its relevance in many academic areas, nuclear science enriches the chemistry curriculum by encouraging interdisciplinary thinking and problem solving. (author)

PC driven integrated vacuum system

International Nuclear Information System (INIS)

Curuia, Marian; Culcer, Mihai; Brandea, Iulian; Anghel, Mihai

2001-01-01

The monitoring of industrial plants by virtual instrumentation represents the most modern trend in the domain of electronic equipment. The integrated vacuum system presented here has several facilities, including the automated data storing of measurement results on hard disk and providing warning messages for operators when the measured parameters are lower or higher upper than the fixed values. The system can also work stand-alone, receiving the commands from the keyboards placed on his front panel but, when it is included in a automation complex system, a remote control from PC is necessary . Both parts of the system, power supply unit for turbo-molecular pump and the vacuum gage, are controlled by an 80C31 microcontroller. Because this microcontroller has a built-in circuitry for a serial communication, we established a serial communication between the PC and the power supply unit for turbo-molecular pump and the vacuum gage, according to the RS-232 hardware standard. As software, after careful evaluation of several options, we chose to develop a hybrid software packing using two different software development tools: LabVIEW, and assembly language. We chose LabVIEW because it is dedicated to data acquisition and communications, containing libraries for data collection, analysis, display and storage. (authors)

PC based alpha, beta and gamma counting system

International Nuclear Information System (INIS)

Bhattacharya, S.; Gopalakrishnan, K.R.; Bairi, B.R.

1992-01-01

In the field of radiation protection and safety a large number of samples have to be assayed for estimation of their radioactivity at various stages in nuclear fuel. A PC based alpha, beta and gamma counting system has been designed for the above application. The system is fully automatic and requires minimum of operator intervention. The main units in the system are detector and pulse processing electronics, sample changer and assembly and IBM PC interface and supporting software. The main function of interface is to control the sample changer which is basically loading and unloading of sample, data acquisition and further processing by software. The pulses from detector are analysed in a pulse shape discriminator. A pulse identified as an alpha, beta or gamma event is converted to digital pulse. These digital pulses are accumulated in the three channels on PC interface each corresponding to alpha, beta and gamma. The sample movements are controlled by interface depending upon sample position. The software has been developed so as to maintain user friendliness and convenience of the operator. Various selection modes for parameters and operation of system provide lot of flexibility in operation of the system. (author). 1 fig

A web-based course in nuclear and radiochemistry

International Nuclear Information System (INIS)

Landsberger, S.; Plionis, A.

2009-01-01

Over the last six years through a Department of Energy Radiochemistry Education Award Program (REAP) we have developed a completely webbased course in nuclear and radiochemistry given at the University of Texas at Austin. This course has had nuclear and radiation engineering and chemistry graduate students. While the course also has an extensive laboratory component only the lectures are web based. The lectures begin with a historical introduction of radiochemistry followed by two movies on Madame Curie. This is followed by the usual lectures on radioactivity, fundamental properties, radioactive decay, decay modes, and nuclear reactions. As section on radioactive waste management and nuclear fuel cycle is also presented. Lectures in neutron activation analysis, geo- and cosmochemistry, and plutonium chemistry have also been developed. All lectures are in power point with many animations and a significant number of solved problems. All students are required to make a short oral presentation on some aspect of nuclear and radiochemistry in their research or a chosen topic. (author)

Annual report 2011. Institute of Radiochemistry

International Nuclear Information System (INIS)

Bernhard, G.

2011-01-01

The Institute of Radiochemistry (IRC) IS one of the seven institutes of the Helmholtz- Zentrum Dresden-Rossendorf (HZDR). The research activities are fully integrated into the ''Nuclear Safety Research Program'' of the Helmholtz Association and focused on the topic ''Safety of Nuclear Waste Disposal''. The research objectives are to generate better process understanding and data for the long-term safety analysis of a nuclear waste disposal in the deep geological underground. A better knowledge about the dominating processes essential for radionuclide (actinide) mobilization and immobilization on the molecular level is needed for the assessment of the macroscopic processes which determine the transport and distribution of radioactivity in the environment. Special emphasis is put on the biological mediated transport of long-lived radionuclides in the geosphere and their interaction with different biosystems like biota and human organism for a better calculation of environmental and health risks. Advanced knowledge is needed for description of the processes dominating at the interfaces between geo- and bio-systems related to the distribution of long-lived radionuclides in various bio-systems along the food chain. More than 120 scientists, technicians, and students, working on their Ph.D., diploma, master, or bachelor thesis, were employed at the Institute of Radiochemistry in 2011. About 20 Ph.D. students are working at the institute. Promotion of young scientists is an important requirement to ensure the competence and further excellent scientific results in the discipline of radiochemistry in future times. We accomplished many new scientific results in the past year, which are presented in this Annual Report, and about 50 original papers were published in peer-reviewed international scientific journals. In 2011, the future research profile of the HZDR was under discussion with the aim to focus the research fields and programs. One result of this process was the

Annual report 2011. Institute of Radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Bernhard, G [ed.

2011-07-01

The Institute of Radiochemistry (IRC) IS one of the seven institutes of the Helmholtz- Zentrum Dresden-Rossendorf (HZDR). The research activities are fully integrated into the ''Nuclear Safety Research Program'' of the Helmholtz Association and focused on the topic ''Safety of Nuclear Waste Disposal''. The research objectives are to generate better process understanding and data for the long-term safety analysis of a nuclear waste disposal in the deep geological underground. A better knowledge about the dominating processes essential for radionuclide (actinide) mobilization and immobilization on the molecular level is needed for the assessment of the macroscopic processes which determine the transport and distribution of radioactivity in the environment. Special emphasis is put on the biological mediated transport of long-lived radionuclides in the geosphere and their interaction with different biosystems like biota and human organism for a better calculation of environmental and health risks. Advanced knowledge is needed for description of the processes dominating at the interfaces between geo- and bio-systems related to the distribution of long-lived radionuclides in various bio-systems along the food chain. More than 120 scientists, technicians, and students, working on their Ph.D., diploma, master, or bachelor thesis, were employed at the Institute of Radiochemistry in 2011. About 20 Ph.D. students are working at the institute. Promotion of young scientists is an important requirement to ensure the competence and further excellent scientific results in the discipline of radiochemistry in future times. We accomplished many new scientific results in the past year, which are presented in this Annual Report, and about 50 original papers were published in peer-reviewed international scientific journals. In 2011, the future research profile of the HZDR was under discussion with the aim to focus the research fields and programs. One result of this process was the

Institute of Radiochemistry. Annual report 1992

International Nuclear Information System (INIS)

Bernhard, G.

1993-05-01

The Institute for Radiochemistry of the Research Center Rossendorf Inc. (FZR) started its work on 1 January 1992. As part of the FZR the Institute of Radiochemistry (IRC) is supported by the Free State of Saxony and the Federal Republic of Germany on the basis of equal shares. Furthermore the IRC has experienced helpful support in form of additional grants. This Annual Report summerizes the research activities achieved in the first year. Some papers result from research activities done in the different divisions of radiochemistry of the former Nuclear Research Centre Rossendorf. Problems of radioecology influence the present research programme and profile of this institute. The major goal of the IRC is fundamental and applied research on the field of the transport behaviour of radiochemical pollutants in the biosphere. Owing to the fact that Saxony and Thuringia are partly contaminated from previous uranium mining activities these investigations are of actual importance. (orig./BBR)

Radiochemistry course in the undergraduate nuclear science program at Universiti Kebangsaan Malaysia

International Nuclear Information System (INIS)

Sarmani, S.B.; Yahaya, R.B.; Yasir, M.S.; Majid, A.Ab.; Khoo, K.S.; Rahman, I.A.; Mohamed, F.

2015-01-01

Universiti Kebangsaan Malaysia offered an undergraduate degree program in Nuclear Science since 1980 and the programme has undergone several modifications due to changes in national policy and priority. The programme covers nuclear sub-disciplines such as nuclear physics, radiobiology, radiochemistry, radiation chemistry and radiation safety. The radiochemistry component consists of radiochemistry, chemistry in nuclear industry, radiochemical analysis laboratory, radiopharmaceutical chemistry subjects and mini research project in radiochemistry. (author)

IBM PC/IX operating system evaluation plan

Science.gov (United States)

Dominick, Wayne D. (Editor); Granier, Martin; Hall, Philip P.; Triantafyllopoulos, Spiros

1984-01-01

An evaluation plan for the IBM PC/IX Operating System designed for IBM PC/XT computers is discussed. The evaluation plan covers the areas of performance measurement and evaluation, software facilities available, man-machine interface considerations, networking, and the suitability of PC/IX as a development environment within the University of Southwestern Louisiana NASA PC Research and Development project. In order to compare and evaluate the PC/IX system, comparisons with other available UNIX-based systems are also included.

Radiochemistry Division annual progress report: 1994

International Nuclear Information System (INIS)

Babu, Y.; Seshagiri, T.K.; Iyer, R.H.

1996-01-01

The research and development activities of Radiochemistry Division during 1994 are briefly described under the headings: (i) nuclear chemistry; (ii) actinide chemistry; (iii) spectroscopy and (iv) instrumentation. Nuclear chemistry work deals with the areas of nuclear reactions, nuclear fission, nuclear spectroscopy, nuclear data measurements, neutron activation analysis and positron annihilation spectroscopy. The research programme in actinide chemistry deals mainly with the complexation of the actinides, lanthanides and fission products from aqueous media with organic reagents such as amides, diamides, HTTA, CMPO, BEHSO and macrocyclic ligands. Spectroscopic studies include electron paramagnetic resonance investigations of actinide and other compounds, investigation of role of radiation induced radical ions in the thermoluminescence of actinide/lanthanide doped phosphors and development of analytical methods for the determination of metallic impurities in plutonium, uranium, thorium oxide and yttrium aluminium garnet matrices. A sinusoidal waveform generator for facilitating electrochemical etching of nuclear tracks and an IBM PC/AT based data station for the IR spectrophotometer were developed by the instrumentation group. A list of publications, numbering 107, by the Scientific staff of the Division is also included in the report. (author). refs., 32 tabs., 31 figs

A embedded Linux system based on PowerPC

International Nuclear Information System (INIS)

Ye Mei; Zhao Jingwei; Chu Yuanping

2006-01-01

The authors will introduce a Embedded Linux System based on PowerPC as well as the base method on how to establish the system. The goal of the system is to build a test system of VMEbus device. It also can be used to setup the small data acquisition and control system. Two types of compiler are provided by the developer system according to the features of the system and the Power PC. At the top of the article some typical embedded Operation system will be introduced and the features of different system will be provided. And then the method on how to build a embedded Linux system as well as the key technique will be discussed in detail. Finally a successful read-write example will be given based on the test system. (authors)

An advanced lab frame PC-PLC regime for a power supply control

International Nuclear Information System (INIS)

Abdel-Bary, M

2010-01-01

A lab frame automatic control system (LFACS) based on a programmable logic controller (PLC) is designed, developed and tested in the laboratory. The LFACS is designed to control and monitor one DC power supply with output current accuracy 0.001 amps, one automatic valve. Also the LFACS will monitor one full range vacuum measurement and one water leak detector. The control system is built based on the internationally standard programmable logic controller (PLC) from Siemens. Two software's have been used; firstly SIMATIC S 7 lite has been used to build the control program and safety interlocks, secondly winCC flexible (runs in a PC computer and communicates with the PLC by multi point interface PC adapter (MPI) has been used to build the user-machine interface . This lab frame control system will be generalized to a global control system to control the MGC-20 cyclotron. The lab tests showed a reliable and flexible control system.

Prospects in radiochemistry

International Nuclear Information System (INIS)

Guillaumont, R.

1988-01-01

This paper draws the basic research direction concerning activities with or on radionuclides related only to chemistry that is to say taking into account degrees of oxidation or valence. Chemical behaviour of very diluted element or even of one atom only, present trends and importance of radiochemistry in the fuel cycle are reviewed [fr

Radiochemistry Programme biennial progress report 1984 and 1985

International Nuclear Information System (INIS)

1986-01-01

This biennial progress report of the Radiochemistry Programme covers the calendar years 1984 and 1985. This report is organised into sections in a manner similar to the organisation of the Radiochemistry Programme. Thus the section on Fuel Behaviour Studies include post-irradiation studies (where the emphasis has been on setting up of facilities), mass spectrometry an nuclear chemistry. Process Chemistry Section covers the activities relating to fuel reprocessing as well as preparation and characterisation of fuel materials. Solid State Chemistry Section deals with thermophysical properties, thermogravimetry, oxygen potentials etc. In the Sodium Chemistry Section the developments relating to on-line meters and their applications are stressed in addition to studies on ternary systems involving sodium and oxygen. Developments in analytical chemistry and analytical services are covered in the next two Sections. Technical Services Section deals with developments in instrumentation and mechanical fabrication. (author)

Nuclear and radiochemistry in China. Present status and future perspectives

International Nuclear Information System (INIS)

Shi, W.Q.; Zhao, Y.L.; Chai, Z.F.

2012-01-01

Nuclear and radiochemistry is one of the frontier areas of chemistry with high impact on national security, energy supply, scientific advances, social and economic development. Nuclear and radiochemistry in China is now experiencing a renaissance, which is being strongly motivated by China's huge demand for nuclear energy. With this in review, the progress in nuclear and radiochemistry of China is selectively addressed. Some hot topics have been summarized and the main research results achieved by Chinese scientists in this field are highlighted, with emphasis on the basic nuclear chemistry, actinide and trans-actinide chemistry, chemistry of spent nuclear fuel reprocessing, radioanalytical chemistry, environmental radiochemistry and radiopharmaceutical chemistry, etc. Some measures about how to promote the radiochemical education and research in China are suggested, and future perspectives are briefly outlined as well. (orig.)

Development of an interdisciplinary curriculum in radiochemistry at the university of Iowa

Energy Technology Data Exchange (ETDEWEB)

Schultz, M.K. [Department of Radiology and Radiation Oncology, Carver College of Medicine, The University of Iowa, 500 Newton Road, MLB180, Iowa City, IA 52240 (United States); De Vries, D.J. [Radiation and Isotopes for Health, Radiation, Radionuclides and Reactors, Technische Universitite Delft, Delft (Netherlands); Forbes, T.Z. [Department of Chemistry, College of Liberal Arts and Sciences, The University of Iowa, CB W374, Iowa City, IA 52242 (United States)

2013-07-01

An interdisciplinary curriculum in radiochemistry is under development at the University of Iowa. The program represents a collaboration between the Departments of Radiology and Chemistry with strong support from the College of Medicine and the College of Liberal Arts and Sciences. The University has undertaken this venture in response to a national and international need for professionals with skills and knowledge of nuclear chemistry and radiochemistry. Students enrolling in this program will benefit from a diverse spectrum of extramurally-funded projects for which radiochemistry is a cornerstone of research and development. Recently, a symposium was conducted at the University of Iowa to determine the undergraduate educational foundation that will produce desirable personnel for the diverse sectors related to radiochemistry. Professionals and researchers from around the United States were invited to contribute their perspectives on aspects of radiochemistry that would be important to include in the undergraduate program. Here, we present a brief communication of the draft curriculum, which is based on our understanding of the current need for radio-chemists and nuclear chemists across disciplines and is informed by our communications with participants in the radiochemistry symposium. Recurring themes, which were stressed by participants, included the need for the development of specialized hands-on open-source laboratory training, internship opportunities, and the inclusion of inexpensive-simple radiochemistry laboratory modules that could be included in early analytical laboratory instruction to attract students to the study of radiochemistry and nuclear chemistry. (authors)

Development of an interdisciplinary curriculum in radiochemistry at the university of Iowa

International Nuclear Information System (INIS)

Schultz, M.K.; De Vries, D.J.; Forbes, T.Z.

2013-01-01

An interdisciplinary curriculum in radiochemistry is under development at the University of Iowa. The program represents a collaboration between the Departments of Radiology and Chemistry with strong support from the College of Medicine and the College of Liberal Arts and Sciences. The University has undertaken this venture in response to a national and international need for professionals with skills and knowledge of nuclear chemistry and radiochemistry. Students enrolling in this program will benefit from a diverse spectrum of extramurally-funded projects for which radiochemistry is a cornerstone of research and development. Recently, a symposium was conducted at the University of Iowa to determine the undergraduate educational foundation that will produce desirable personnel for the diverse sectors related to radiochemistry. Professionals and researchers from around the United States were invited to contribute their perspectives on aspects of radiochemistry that would be important to include in the undergraduate program. Here, we present a brief communication of the draft curriculum, which is based on our understanding of the current need for radio-chemists and nuclear chemists across disciplines and is informed by our communications with participants in the radiochemistry symposium. Recurring themes, which were stressed by participants, included the need for the development of specialized hands-on open-source laboratory training, internship opportunities, and the inclusion of inexpensive-simple radiochemistry laboratory modules that could be included in early analytical laboratory instruction to attract students to the study of radiochemistry and nuclear chemistry. (authors)

Annual report 2011. Institute of Radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Bernhard, G. (ed.)

2011-07-01

The Institute of Radiochemistry (IRC) IS one of the seven institutes of the Helmholtz- Zentrum Dresden-Rossendorf (HZDR). The research activities are fully integrated into the ''Nuclear Safety Research Program'' of the Helmholtz Association and focused on the topic ''Safety of Nuclear Waste Disposal''. The research objectives are to generate better process understanding and data for the long-term safety analysis of a nuclear waste disposal in the deep geological underground. A better knowledge about the dominating processes essential for radionuclide (actinide) mobilization and immobilization on the molecular level is needed for the assessment of the macroscopic processes which determine the transport and distribution of radioactivity in the environment. Special emphasis is put on the biological mediated transport of long-lived radionuclides in the geosphere and their interaction with different biosystems like biota and human organism for a better calculation of environmental and health risks. Advanced knowledge is needed for description of the processes dominating at the interfaces between geo- and bio-systems related to the distribution of long-lived radionuclides in various bio-systems along the food chain. More than 120 scientists, technicians, and students, working on their Ph.D., diploma, master, or bachelor thesis, were employed at the Institute of Radiochemistry in 2011. About 20 Ph.D. students are working at the institute. Promotion of young scientists is an important requirement to ensure the competence and further excellent scientific results in the discipline of radiochemistry in future times. We accomplished many new scientific results in the past year, which are presented in this Annual Report, and about 50 original papers were published in peer-reviewed international scientific journals. In 2011, the future research profile of the HZDR was under discussion with the aim to focus the research fields and programs

Nuclear and Radiochemistry Fundamentals and Applications

CERN Document Server

Lieser, Karl Heinrich

2001-01-01

This handbook gives a complete and concise description of the up-to-date knowledge of nuclear and radiochemsitry and applications in the various fields of science. I is based on teaching courses and on research for over 40 years. The book is addressed to any researcher whishing sound knowledge about the properties of matter, be it a chemist, a physicist, a medical doctor, a mineralogist or a biologist. They will all find it a valuable source of information about the principles and applications of nuclear and radiochemistry. Research in radiochemistry includes: Study of radioactice matter in na

Quality assurance in radiochemistry - a report from practice

International Nuclear Information System (INIS)

Kopka, K.; Burkert, D.; Wagner, S.; Kriens, M.; Schober, O.

2005-01-01

The Department of Nuclear Medicine in Muenster has been certified since January 17 th 2003 by external auditing according to DIN EN ISO 9001:2000. The compliance with EN ISO 9001:2000 was approved by the European Association of Nuclear Medicine (EANM) in August 2003. To date, the certificate assignment (No. 2384D) to the nuclear medicinal facilities of the University Hospital in Muenster (UKM) is unique in Germany particularly because the certification not only covers the diagnostic and therapeutical scope of the Department of Nuclear Medicine but also for the first time contains the in-house-production of radionuclides and radiopharmaceuticals including radioactive waste disposal. Consequently, the routine duties and responsibilities of a section radiochemistry which is imbedded in a clinical organisation have been standardised and well documented for the first time according to DIN EN ISO 9001:2000. The operational procedures for radiopharmaceutical chemistry are documented in the work areas 'conventional' radiochemistry laboratory (radionuclide laboratory) as well as modern production facility for PET radiochemistry. The implementation of standard operational procedures (SOPs) cause an increase of efficiency in a radiochemistry task group with two graduate radiopharmaceutical chemists and two well-trained technical/laboratory assistants. (orig.)

Radiochemistry in the world: a biblio-metric study (1989-1998); La radiochimie dans le monde: etude bibliometrique (1989-1998)

Energy Technology Data Exchange (ETDEWEB)

Guillaumont, R. [Academie des Sciences, 75 - Paris (France); Madic, Ch. [CEA Saclay, Dir. de l' Energie Nucleaire DEN, 91 - Gif sur Yvette (France); Pichot, Ch. [CEA Saclay, Dept. Patrimoine et Infrastructures, DEN/DPI/STI/SID, 91 - Gif sur Yvette (France); Rousseau-Hans, F. [CEA Saclay, Direction des Technologies de l' Information, DTI/SITI/LII, 91 - Gif sur Yvette (France)

2002-07-01

The study analyzes the world literature in the field of radiochemistry. It tries to represent the radiochemistry, through the development of its sub-fields in the different parts of the world and through the international collaboration patterns. Most data come from the INIS (International Nuclear Information System) database operated by the International Atomic Energy Agency (IAEA) and cover the 1989-1998 era. Less rich countries publish proportionally more in fundamental radiochemistry whereas high developed countries invest more in nuclear medicine. Another aspect of the radiochemistry is approached with the study of scientific national and international journals which publish articles in this field. English remains the most important language used in the fundamental fields of radiochemistry while national languages, such as russian, japanese and chinese, keep a certain importance in applied sciences like earth sciences, waste management and nuclear medicine. (author)

A PowerPC-based control system for the Read-Out-Driver module of the ATLAS IBL

International Nuclear Information System (INIS)

Balbi, G; Bruni, G; Bruschi, M; D'Antone, I; Polini, A; Rizzi, M; Travaglini, R; Dopke, J; Falchieri, D; Gabrielli, A; Zannoli, S; Flick, T; Heim, T; Neumann, M; Grosse-Knetter, J; Krieger, N; Joseph, J; Kugel, A; Schroer, N; Morettini, P

2012-01-01

The ATLAS experiment at LHC planned to upgrade the existing Pixel Detector with the insertion of an innermost silicon layer, called Insertable B-layer (IBL). A new front-end ASIC has been foreseen (named FE-I4) and it will be read out with improved off-detector electronics. In particular, the new Read-Out Driver card (ROD) is a VME-based board designed to process a four-fold data throughput. Moreover, the ROD hosts the electronics devoted to control operations whose main tasks are providing setup busses to access configuration registers on several FPGAs, receiving configuration data from external PCs, managing triggers and running calibration procedures. In parallel with a backward-compatible solution with a Digital Signal Processor (DSP), a new ROD control circuitry with a PowerPC embedded into an FPGA has been implemented. In this paper the status of the PowerPC-based control system will be outlined with major focus on firmware and software development strategies.

Specificity of discoveries in radiochemistry

International Nuclear Information System (INIS)

Krivomazov, A.N.

1977-01-01

The development of radiochemistry as a science is elucidated. On the basis of original papers and archives materials which have become available only recently, specific features of opening the law of radioactive displacements and isotopy of radioactive elements are presented in detail. A contribution of Hevesy, Russel, Fajans, and Soddy into the solution of this problem is considered; an important role of Rutherford in putting down the priority conflict is shown. Two stages of scientific generalization are singled out in the history of opening the law of radioactive displacements: the stage of the rules and the stage of the laws. On this basis the solutions of the priority problems have been reconsidered. It is shown that the history of radiochemistry is rich in discoveries which have undergone a relatively long evolution

Radiochemistry in chemistry and chemistry related undergraduate programmes in Argentina

International Nuclear Information System (INIS)

Fornaciari Iljadica, M.C.; Furnari, J.C.; Cohen, I.M.

2006-01-01

The evolution of education in Argentina at the university level is described. The detailed search of the educational offer shows that less than half of the universities (35 out of 92) include chemistry and chemistry related undergraduate programmes in their curriculum. The revision of the position of radiochemistry in these programmes reveals that only seven courses on radiochemistry are currently offered. Radiochemistry is included only in few programmes in chemistry and biochemistry. With respect to the programmes in chemical engineering the situation is worse. This offer is strongly concentrated in Buenos Aires and its surroundings. (author)

Teaching nuclear and radiochemistry at undergraduate colleges

International Nuclear Information System (INIS)

Kinard, W.F.

1993-01-01

A large fraction of the potential graduate students in chemistry come from undergraduate colleges. The exposure of these students to the field of nuclear and radiochemistry is limited by the fact that few professionals actively involved in the field teach at these schools. There is also increasing competition for the limited number of chemistry students by other chemical specializations. Innovative approaches such as a short course to introduce students to nuclear and radiochemistry and some of the needs for undergraduate teaching are discussed. (author) 6 refs.; 2 figs

PC-based control of the internal target station at the Nuclotron

Energy Technology Data Exchange (ETDEWEB)

Kilman, J [and others

1996-12-31

A PC-based control system of the internal target at the Nuclotron is described. The system is based on CAMAC-control of the step motor of the station and screen representation of information about needed beam parameters and space-time position of targets relative to a beam. 6 refs.; 4 figs.

Implementation of RS-485 Communication between PLC and PC of Distributed Control System Based on VB

Science.gov (United States)

Lian Zhang, Chuan; Da Huang, Zhi; Qing Zhou, Gui; Chong, Kil To

2015-05-01

This paper focuses on achieving RS-485 communication between programmable logical controller (PLC) and PC based on visual basic 6.0 (VB6.0) on an experimental automatic production line. Mitsubishi FX2N PLCs and a PC are chosen as slave stations and main station, respectively. Monitoring software is developed using VB6.0 for data input/output, flow control and online parameters setting. As a result, all functions are fulfilled with robust performance. It is concluded from results that one PC can monitor several PLCs using RS-485 communication.

The SFU/TRIUMF Radiochemistry Institute

International Nuclear Information System (INIS)

Ruth, T.J.; D'Auria, J.M.

1993-01-01

An institute for the training of radiochemist was proposed in 1989 by scientists/educators from Simon Fraser University (SFU) and the TRIUMF Nuclear Research Facility in Canada. The intensive program spans 6 weeks and includes seminars and problem sessions as well as practical laboratory experience. Topics include health physics, synthesis of short lived radiopharmaceuticals, automation and quality control. The first offering was in May-June 1990. Based on this experience a textbook on Radiochemistry and Radiopharmaceutical Chemistry has been initiated. Parts of the program may be implemented into a credit course to be offered through the Department of Chemistry at SFU. (author) 6 refs.; 3 tabs

Radiochemistry days; Journees radiochimie

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-09-01

This document provides the 44 papers (transparencies used during the presentations and posters) presented at the Radiochemistry Days, held September 3-4, 1998 in Nantes, France. The main studied topics were problematic questions concerning the nuclear fuel cycle and in particular the management, storage of radioactive wastes and the environmental impact. (O.M.)

PC based vibration monitoring system

International Nuclear Information System (INIS)

Jain, Sanjay K.; Roy, D.A.; Pithawa, C.K.; Patil, R.K.

2004-01-01

Health of large rotating machinery gets reflected in the vibration signature of the rotor and supporting structures and proper recording of these signals and their analysis can give a clear picture of the health of the machine. Using these data and their trending, it is possible to predict an impending trouble in the machine so that preventive action can be taken in time and catastrophic failure can be avoided. Continuous monitoring and analysis can give quick warning and enable operator to take preventive measures. Reactor Control Division, BARC is developing a PC based Vibration monitoring system for turbo generator machinery. The System can acquire 20 vibration signals at a rate of 5000 samples per second and also 15 process signals at a rate of 100 samples/ sec. The software for vibration monitoring system includes acquisition modules, analysis modules and Graphical User Interface module. The acquisition module involves initialization, setting of required parameters and acquiring the data from PC-based data acquisition cards. The acquired raw vibration data is then stored for analysis using various software packages. The display and analysis of acquired data is done in LabVIEW 7.0 where the data is displayed in time as well as frequency domain along with the RMS value of the signal. (author)

PC/104 Embedded IOCs at Jefferson Lab

International Nuclear Information System (INIS)

Yan, Jianxun; Allison, Trent; Witherspoon, Sue; Cuffe, Anthony

2009-01-01

Jefferson Lab has developed embedded IOCs based on PC/104 single board computers (SBC) for low level control systems. The PC/104 IOCs run EPICS on top of the RTEMS operating system. Two types of control system configurations are used in different applications, PC/104 SBC with commercial PC/104 I/O cards and PC/104 SBC with custom designed FPGA-based boards. RTEMS was built with CEXP shell to run on the PC/104 SBC. CEXP shell provides the function of dynamic object loading, which is similar to the widely used VxWorks operating system. Standard software configurations were setup for PC/104 IOC application development to provide a familiar format for new projects as well as ease the conversion of applications from VME based IOCs to PC/104 IOCs. Many new projects at Jefferson Lab are going to employ PC/104 SBCs as IOCs and some applications have already been running them for accelerator operations. The PC/104 - RTEMS IOC provides a free open source Real-Time Operating System (RTOS), low cost/maintenance, easily installed/ configured, flexible, and reliable solution for accelerator control and 12GeV Upgrade projects.

The Crisis in Radiochemistry and Nuclear Chemistry Education

International Nuclear Information System (INIS)

Hoffman, D C

2005-01-01

A brief summary of the current status of radiochemistry and nuclear chemistry in the U. S. and abroad will be given. Current and future needs for scientists in these fields, especially in the U. S., will be discussed. Challenges that must be met in order to reverse the ''catastrophic'' downward trend in the numbers of students, faculty, and university programs in radiochemistry and nuclear chemistry will be considered, and some potential ways to reinvigorate and expand relevant university research and educational programs will be suggested

A PC-Linux-based data acquisition system for the STAR TOFp detector

International Nuclear Information System (INIS)

Liu Zhixu; Liu Feng; Zhang Bingyun

2003-01-01

Commodity hardware running the open source operating system Linux is playing various important roles in the field of high energy physics. This paper describes the PC-Linux-based Data Acquisition System of STAR TOFp detector. It is based on the conventional solutions with front-end electronics made of NIM and CAMAC modules controlled by a PC running Linux. The system had been commissioned into the STAR DAQ system, and worked successfully in the second year of STAR physics runs

Web-based radiochemistry training at the University of Texas at Austin

International Nuclear Information System (INIS)

Landsberger, S.; Strassberg, E.; Schnmidt, K.

2005-01-01

Outline of a comprehensive website based offering of a basic graduate level or senior undergraduate level course in nuclear and radiochemistry is presented. This password protected course follows classical pedagogical treatment of the subject. However, it has been augmented by the implementation of Flash animations to better teach basic nuclear and radiochemistry concepts. As well, the website is linked to many Internet related resources. All lectures and problems are presented in Microsoft Power Point format with Flash animations incorporated. A series of six experiments in radiochemistry, also offered in the course is available in a downloadable Microsoft Word format. (author)

Radiochemistry and associated nuclear chemistry in the beginning of the twenty-first century

International Nuclear Information System (INIS)

Goeij, J.J.M. de

2002-01-01

In many countries radiochemistry and associated nuclear chemistry are facing decreasing attention in scientific and technological education and training. In addition, research facilities involving radioactivity are dealing with growing difficulties, e.g. in respect to finances, staff, public support, and legislation. Quite often it is suggested that radiochemistry has matured and does not need any further development. Moreover, it is stated that radiochemical methods are out-run by new, non-nuclear methods, and thus have actually lost their raison d'etre. Altogether this leads to a situation where radioactivity and radiochemistry are partly vanishing both as a science and as a tool. This situation calls for a closer examination for areas where radiochemistry may continue to play a useful, if not a decisive role, and some guidelines were presented how to proceed in the near future. For that purpose a definition of radiochemistry is given to demarcate it from other areas. Nuclear chemistry as an adjacent field is strongly connected with radiochemistry, and in the frame of the presentation a relevant part of it is considered here as integrated in radiochemistry. The various areas of radiochemistry may be classified into three categories, which partly overlap. The first category is the field of the fundamental aspects of radiochemistry itself. This category covers among others nuclear reaction cross-sections, production routes with associated yields and radionuclidic impurities, decay schemes of radionuclides, radiochemical separations, recoil and hot-atom chemistry, isotope effects and fractionation, and interaction of radiation with matter and detection. The second category covers fields where radioactivity is inextricably bound to the subject involved. This holds e.g. for the entire nuclear fuel cycle, study of the very heavy elements (Z > 100), primordial radioactivity on earth, cosmogenic radioactivity in atmosphere and cosmos, and radionuclides for dating. The

Institutional results of the Argentine Graduate Programme in Radiochemistry

International Nuclear Information System (INIS)

Cohen, I.M.

2006-01-01

The evolution of radiochemistry at the National Atomic Energy Commission (CNEA) in Argentina is analyzed. The antecedents of the establishment, in 1998, of the Master Programme in Radiochemistry, jointly organized by CNEA and the Buenos Aires Regional Faculty of the National Technological University are revised, and the structure of the Programme is described. On the basis of the thesis works, the initial trends are discussed. Finally, the institutional results of the Programme are described. (author)

KfK Institute for Radiochemistry. Progress report on research and development activities in 1991

International Nuclear Information System (INIS)

1992-03-01

The activities undertaken by the Institute of Radiochemistry (IRCH) in 1991 under the following projects are presented: (1) Pollutant control in the environment (water and soil, systems analysis and environmental engineering; (2) nuclear fusion (blanket development, tritium technology); (3) radioactive waste management (basic works on reprocessing technologies, waste products, and ultimate storage facilities); (4) microtechnology (chemical microsensor development, and (5) other research projects (institute-related non-sponsored research). In the annex the publications by the IRCH staff are listed. (orig.) [de

KfK Institute for Radiochemistry. Progress report on research and development activities in 1990

International Nuclear Information System (INIS)

1991-03-01

The activities undertaken by the Institue of Radiochemistry (IRCH) in 1990 under the following projects are presented: (1) Pollutant control in the environment (water and soil, systems analysis and environmental engineering; (2) nuclear fusion (blanket development, tritium technology); (3) radioactive waste management (basic works on reprocessing technologies, waste products, and ultimate storage facilities); (4) microtechnology (chemical microsensor development, and (5) other research projects (institute-related non-sponsored research). In the annex the publications by the IRCH staff are listed. (BBR) [de

Future directions for separation science in nuclear and radiochemistry

International Nuclear Information System (INIS)

Pruett, D.J.

1986-01-01

Solvent extraction and ion exchange have been the most widely used separation techniques in nuclear and radiochemistry since their development in the 1940s. Many successful separations processes based on these techniques have been used for decades in research laboratories, analytical laboratories, and industrial plants. Thus, it is easy to conclude that most of the fundamental and applied research that is needed in these areas has been done, and that further work in these ''mature'' fields is unlikely to be fruitful. A more careful review, however, reveals that significant problems remain to be solved, and that there is a demand for the development of new reagents, methods, and systems to solve the increasingly complex separations problems in the nuclear field. Specifically, new separation techniques based on developments in membrane technology and biotechnology that have occurred over the last 20 years should find extensive applications in radiochemical separations. Considerable research is needed in such areas as interfacial chemistry, the design and control of highly selective separation agents, critically evaluated data bases and mathematical models, and the fundamental chemistry of dilute solutions if these problems are to be solved and new techniques developed in a systematic way. Nonaqueous separation methods, such as pyrochemical and fluoride volatility processes, have traditionally played a more limited role in nuclear and radiochemistry, but recent developments in the chemistry and engineering of these processes promises to open up new areas of research and application in the future

Radiochemistry Division biennial progress report: 1995-1996

International Nuclear Information System (INIS)

Tomar, B.S.; Pujari, P.K.; Mathur, J.N.; Mohapatra, P.K.; Murali, M.S.; Natarajan, V.; Jayanthakumar, M.L.

1997-01-01

The research and development activities of Radiochemistry Division during 1995-96 are briefly described under the headings : (1) nuclear chemistry; (2) actinide chemistry; (3) spectroscopy and (4) instrumentation. Nuclear chemistry work deals with the areas of nuclear reactions, nuclear spectroscopy, nuclear probes and radioanalytical techniques. The research programme in actinide chemistry centered on development of novel procedures for the separation of actinides, guest-host chemistry of lanthanides, actinides and fission products and extractants for solvent extraction. Spectroscopy section activities are summarised under (1) basic research in the solid state chemistry; (2) development of analytical spectroscopic methods for the trace metal determination in nuclear materials; (3) chemical quality control of plutonium 239, uranium 233 and thorium based nuclear fuels. Instrumentation group deals mainly with servicing and maintenance of electronic instruments and allied systems. A list of publications, by the scientific staff of the Divisions is also included. (author)

Radiochemistry Division biennial progress report: 1995-1996

Energy Technology Data Exchange (ETDEWEB)

Tomar, B S; Pujari, P K; Mathur, J N; Mohapatra, P K; Murali, M S; Natarajan, V; Jayanthakumar, M L [eds.; Radiochemistry Division, Bhabha Atomic Research Centre, Mumbai (India)

1998-12-31

The research and development activities of Radiochemistry Division during 1995-96 are briefly described under the headings : (1) nuclear chemistry; (2) actinide chemistry; (3) spectroscopy and (4) instrumentation. Nuclear chemistry work deals with the areas of nuclear reactions, nuclear spectroscopy, nuclear probes and radioanalytical techniques. The research programme in actinide chemistry centered on development of novel procedures for the separation of actinides, guest-host chemistry of lanthanides, actinides and fission products and extractants for solvent extraction. Spectroscopy section activities are summarised under (1) basic research in the solid state chemistry; (2) development of analytical spectroscopic methods for the trace metal determination in nuclear materials; (3) chemical quality control of plutonium 239, uranium 233 and thorium based nuclear fuels. Instrumentation group deals mainly with servicing and maintenance of electronic instruments and allied systems. A list of publications, by the scientific staff of the Divisions is also included. (author)

A full automatic system controlled with IBM-PC/XT micro-computer for neutron activation analysis

International Nuclear Information System (INIS)

Song Quanxun

1992-01-01

A full automatic system controlled with micro-computers for NAA is described. All processes are automatically completed with an IBM-PC/XT micro-computer. The device is stable, reliable, flexible and convenient for use and has many functions and applications in automatical analysis of long, middle and short lived nuclides. Due to a high working efficiency of the instrument and micro-computers, both time and power can be saved. This method can be applied in other nuclear analysis techniques

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2001

International Nuclear Information System (INIS)

Fanghaenel, T.; Bernhard, G.; Engelmann, H.J.

2002-05-01

The Institute of Radiochemistry (IRC), one of the five institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Main goal is the quantification of the interaction and mobility of radionuclides in the geo- and biosphere. Because of their high radiotoxicity and long half-life the actinides are of special interest. Among the actinides uranium and its manifold interactions plays a major role in the institute's research activities. In addition the interactions of some important long-lived fission and decay products are studied. More than 60 scientists, technicians and PhD students are employed in the Institute of Radiochemistry. The research is focused on understanding the fundamental processes relevant for the behavior of radionuclides in the environment. Main topics are: Aquatic chemistry, Radionuclide interaction with mineral surfaces, Radionuclide interaction with biological materials (bacteria and plants), Modeling the radionuclide transport, Development of spectroscopic speciation methods We accomplished many new scientific results in the past year, which are presented in this Annual Report. (orig.)

A Decade of Experience in Implementing Quality Management System at Radiochemistry and Environmental Laboratory (RAS)

International Nuclear Information System (INIS)

Norfaizal Mohamed; Nita Salina Abu Bakar; Zal U'yun Wan Mahmood; Wo, Y.M.; Abdul Kadir Ishak; Nurrul Assyikeen Md Jaffary; Noor Fadzilah Yusof

2016-01-01

Quality management system has been introduced to a few laboratories in the Malaysian Nuclear Agency (Nuclear Malaysia) for the purpose to enhance the delivery of quality services to customers. Radiochemistry and Environmental Laboratory (RAS) is a service center in Nuclear Malaysia has implemented a quality management system in procedures carried out and has obtained accreditation for MS ISO/ IEC 17025 since 8 December 2005. This paper is intended to share experiences RAS in implementing a quality management system in accordance with standard MS ISO/ IEC 17025 accreditation and managed to keep it to this day. In addition, the RAS achievements including issues and challenges in implementing the quality management system in the past 10 years will also be discussed. (author)

Avoiding shortage of radio-chemists with the NAMP radiochemistry webinars

Energy Technology Data Exchange (ETDEWEB)

Paviet-Hartmann, P. [Idaho National Laboratory, 995 University Blvd, Idaho Falls, ID 83402 (United States); Akbarzadeh, M. [Nuclear Waste Partnership, LLC, 1400 university Dr, Carlsbad, NM 88220 (United States); Griggs, J. [US Environmental Protection Agency, NAREL, 540 S. Morris Ave, Montgomery, AL 36115-2601 (United States)

2013-07-01

The U.S. Department of Energy originally created the National Analytical Management Program (NAMP) to help coordinate its analytical capabilities and to address national needs in technology and resources. In support of this mission, the NAMP established a subcommittee to promote training and education in radiochemistry to avert the predicted loss in expertise. In cooperation with the U.S. Environmental Protection Agency and university partners, the NAMP developed a series of two-hour webinar presentations by experts on different topics relevant to radiochemistry. These webinars are intended to be of interest to those already in the workforce who may need a refresher course or a better understanding of specific radiochemistry topics. The live webinars include slides presentation, and engage the attendees by giving them the opportunity to ask questions during the live event through the web-cast interface. Certificates may be given for attendance during the live webinar. The success of these webinars relies not only on the presenters who are internationally recognized experts but also on how we promote them: we advertised them through a dedicated web site, social networks or flyers. Another important point is that they are free are accessible online in 2 formats: audio-video recording and pdf files. Recorded and archived versions comprise a library vital to future generations of radio-chemists and scientists interested in radiochemistry. The first webinar, An Overview of Actinide Chemistry, was presented on April 20, 2012. The overwhelmingly positive feedback from participants clearly demonstrates that the NAMP webinars are making a difference by providing unique educational opportunities in radiochemistry.

Avoiding shortage of radio-chemists with the NAMP radiochemistry webinars

International Nuclear Information System (INIS)

Paviet-Hartmann, P.; Akbarzadeh, M.; Griggs, J.

2013-01-01

The U.S. Department of Energy originally created the National Analytical Management Program (NAMP) to help coordinate its analytical capabilities and to address national needs in technology and resources. In support of this mission, the NAMP established a subcommittee to promote training and education in radiochemistry to avert the predicted loss in expertise. In cooperation with the U.S. Environmental Protection Agency and university partners, the NAMP developed a series of two-hour webinar presentations by experts on different topics relevant to radiochemistry. These webinars are intended to be of interest to those already in the workforce who may need a refresher course or a better understanding of specific radiochemistry topics. The live webinars include slides presentation, and engage the attendees by giving them the opportunity to ask questions during the live event through the web-cast interface. Certificates may be given for attendance during the live webinar. The success of these webinars relies not only on the presenters who are internationally recognized experts but also on how we promote them: we advertised them through a dedicated web site, social networks or flyers. Another important point is that they are free are accessible online in 2 formats: audio-video recording and pdf files. Recorded and archived versions comprise a library vital to future generations of radio-chemists and scientists interested in radiochemistry. The first webinar, An Overview of Actinide Chemistry, was presented on April 20, 2012. The overwhelmingly positive feedback from participants clearly demonstrates that the NAMP webinars are making a difference by providing unique educational opportunities in radiochemistry

Radiochemistry methods in DOE methods for evaluating environmental and waste management samples

International Nuclear Information System (INIS)

Fadeff, S.K.; Goheen, S.C.

1994-08-01

Current standard sources of radiochemistry methods are often inappropriate for use in evaluating US Department of Energy environmental and waste management (DOE/EW) samples. Examples of current sources include EPA, ASTM, Standard Methods for the Examination of Water and Wastewater and HASL-300. Applicability of these methods is limited to specific matrices (usually water), radiation levels (usually environmental levels), and analytes (limited number). Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) attempt to fill the applicability gap that exists between standard methods and those needed for DOE/EM activities. The Radiochemistry chapter in DOE Methods includes an ''analysis and reporting'' guidance section as well as radiochemistry methods. A basis for identifying the DOE/EM radiochemistry needs is discussed. Within this needs framework, the applicability of standard methods and targeted new methods is identified. Sources of new methods (consolidated methods from DOE laboratories and submissions from individuals) and the methods review process will be discussed. The processes involved in generating consolidated methods add editing individually submitted methods will be compared. DOE Methods is a living document and continues to expand by adding various kinds of methods. Radiochemistry methods are highlighted in this paper. DOE Methods is intended to be a resource for methods applicable to DOE/EM problems. Although it is intended to support DOE, the guidance and methods are not necessarily exclusive to DOE. The document is available at no cost through the Laboratory Management Division of DOE, Office of Technology Development

Cross-compilation of ATLAS online software to the power PC-Vx works system

International Nuclear Information System (INIS)

Tian Yuren; Li Jin; Ren Zhengyu; Zhu Kejun

2005-01-01

BES III, selected ATLAS online software as a framework of its run-control system. BES III applied Power PC-VxWorks system on its front-end readout system, so it is necessary to cross-compile this software to PowerPC-VxWorks system. The article demonstrates several aspects related to this project, such as the structure and organization of the ATLAS online software, the application of CMT tool while cross-compiling, the selection and configuration of the cross-compiler, methods to solve various problems due to the difference of compiler and operating system etc. The software, after cross-compiling, can normally run, and makes up a complete run-control system with the software running on Linux system. (authors)

Challenges and Opportunities in Nuclear Science and Radiochemistry Education at the University of Missouri

International Nuclear Information System (INIS)

Robertson, J. David; Etter, Randy L.; Neumeyer, Gayla M.; Miller, William H.

2009-01-01

Over the last thirty years, numerous reports and workshops have documented the decline in nuclear and radiochemistry education programs in the United States. Practitioners and stakeholders are keenly aware of the impact this decline will have on emerging technologies and critical research and are fully committed to rebuilding programs in nuclear and radiochemistry. The challenge is, however, to persuade our academic peers and administrations to invest in nuclear and radiochemistry education and training programs in view of multiple competing priorities. This paper provides an overview of the expansion of the radiochemistry program and the creation of the Nuclear Energy Technology Workforce (NETWork) Center at the University of Missouri, Columbia and the lessons learned along the way.

From a UNIX to a PC Based SCADA System

CERN Document Server

Momal, F

1999-01-01

In order to facilitate the development of supervisory applications involved in slow process control (such as cryogenic control), the LHC/IAS Group (Equipment Controls Group) opted, a few years ago, for an industrial SCADA package which runs on UNIXÒ platforms. However, to reduce costs and following market trends, it has been decided to move over to a PC-based package. Several processes relating to the testing of the prototypes of the LHC magnets are already controlled in this way. However, it was still necessary to provide all the services previously available to the users, for example, data archiving in central databases, real-time access through the Web, automatic GSM calls, etc. This paper presents the advantages and drawbacks of a PC-based package versus a Unix-based system. It also lists the criteria used in the market survey to arrive at the final selection, as well as, the overall architecture, highlighting the developments needed to integrate the package into the global computing environment.

Experiments in radiochemistry

International Nuclear Information System (INIS)

Schwankner, R.

1980-11-01

Twelve experiments in radiochemistry, nuclear chemistry, radiation detection and radiation measurement are presented which have been tested in teaching practice. Criteria of selection were minimum apparative expenditure, preparation time, radiation exposure, and danger of incorporation or contamination. The experiments will teach students how to handle unsealed radioactive materials within a fraction of a permissible values and thus train them in radiochemical techniques of working. Theoretical, historical and topical aspects are mentioned in order to give the students some background. A detailed bibliography of relevant publications is given. (orig./HP) [de

Advances in intense beams, beam delivery, targetry, and radiochemistry at advanced cyclotron systems

Energy Technology Data Exchange (ETDEWEB)

Johnson, R.R. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada)]. E-mail: djohnson@advancedcyclotron.com; Watt, R. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); Kovac, B. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); Zyuzin, A. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); Van Lier, E. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); Erdman, K.L. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); Gyles, Wm. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); Sabaiduc, V. [Advanced Cyclotron Systems Inc., 7851 Alderbridge Way, Richmond, BC, V6X 2A4 (Canada); McQuarrie, S.A. [Faculty of Medicine and Dentistry, University of Alberta, Edmonton, AB, T6G 1Z2 (Canada); Wilson, J. [Faculty of Medicine and Dentistry, University of Alberta, Edmonton, AB, T6G 1Z2 (Canada); Backhouse, C. [Department of Electrical Engineering, University of Alberta, Edmonton, AB (Canada); Gelbart, Wm. [Advanced System Design, C22, S6, RR1, Garden Bay, BC, V0N 1S0 (Canada); Kuo, T. [4654 N. Larwin Ave., Concorde, CA 94521 United States (United States)

2007-08-15

The increasing demand for radionuclides for PET and SPECT has resulted in ACSI system improvements starting from the cyclotron and proceeding to the Radiochemistry Modules. With more TR30 cyclotrons installed and operating at full capacity, emphasis has been placed on improving the operational components to reduce both the incidence of failure and subsequent maintenance time. A cyclotron system has been developed that meets the needs of a regional radiopharmacy that supplies both positron and single photon emitters that would not otherwise be available. This new system has been named the TR24. In order to deal with some of the challenges of high currents, a method has been developed for passivating the entrance window foil during high current irradiation of a water target used to produce F-18. A method has been developed for passivating the entrance window foil to reduce unwanted chemical species that interfere with radiopharmaceutical production. Preliminary results for novel radioiodine production technique using the TR19/9 are also discussed.

Advances in intense beams, beam delivery, targetry, and radiochemistry at advanced cyclotron systems

Science.gov (United States)

Johnson, R. R.; Watt, R.; Kovac, B.; Zyuzin, A.; Van Lier, E.; Erdman, K. L.; Gyles, Wm.; Sabaiduc, V.; McQuarrie, S. A.; Wilson, J.; Backhouse, C.; Gelbart, Wm.; Kuo, T.

2007-08-01

The increasing demand for radionuclides for PET and SPECT has resulted in ACSI system improvements starting from the cyclotron and proceeding to the Radiochemistry Modules. With more TR30 cyclotrons installed and operating at full capacity, emphasis has been placed on improving the operational components to reduce both the incidence of failure and subsequent maintenance time. A cyclotron system has been developed that meets the needs of a regional radiopharmacy that supplies both positron and single photon emitters that would not otherwise be available. This new system has been named the TR24. In order to deal with some of the challenges of high currents, a method has been developed for passivating the entrance window foil during high current irradiation of a water target used to produce F-18. A method has been developed for passivating the entrance window foil to reduce unwanted chemical species that interfere with radiopharmaceutical production. Preliminary results for novel radioiodine production technique using the TR19/9 are also discussed.

Advances in intense beams, beam delivery, targetry, and radiochemistry at advanced cyclotron systems

International Nuclear Information System (INIS)

Johnson, R.R.; Watt, R.; Kovac, B.; Zyuzin, A.; Van Lier, E.; Erdman, K.L.; Gyles, Wm.; Sabaiduc, V.; McQuarrie, S.A.; Wilson, J.; Backhouse, C.; Gelbart, Wm.; Kuo, T.

2007-01-01

The increasing demand for radionuclides for PET and SPECT has resulted in ACSI system improvements starting from the cyclotron and proceeding to the Radiochemistry Modules. With more TR30 cyclotrons installed and operating at full capacity, emphasis has been placed on improving the operational components to reduce both the incidence of failure and subsequent maintenance time. A cyclotron system has been developed that meets the needs of a regional radiopharmacy that supplies both positron and single photon emitters that would not otherwise be available. This new system has been named the TR24. In order to deal with some of the challenges of high currents, a method has been developed for passivating the entrance window foil during high current irradiation of a water target used to produce F-18. A method has been developed for passivating the entrance window foil to reduce unwanted chemical species that interfere with radiopharmaceutical production. Preliminary results for novel radioiodine production technique using the TR19/9 are also discussed

Environmental radiochemistry and radioactivity. A current bibliography

International Nuclear Information System (INIS)

Bujdoso, E.

1999-01-01

A current bibliography with 146 references has been compiled on environmental radiochemistry and radioactivity for years 1993-1997 based on INIS Atomindex. The references are arranged alphabetically by first authors' names. (N.T.)

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2004

Energy Technology Data Exchange (ETDEWEB)

Bernhard, G [ed.

2005-07-01

The Institute of Radiochemistry (IRC), one of the six Institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Motivation and background of our research are environmental processes relevant for the installation of nuclear waste repositories, for remediation of uranium mining and milling sites, and for radioactive contaminations caused by nuclear accidents and fallout. Because of their high radiotoxicity and long half-life the actinides are of special interest. The research is focused on a better understanding of the chemical behavior of actinides in the environment on a molecular level. We will increase our efforts to study both the speciation of actinides on bio-molecular interfaces and their transport in bio-systems. Current topics of our research work are: aquatic chemistry of actinides, actinides in bio-systems, interaction of actinides with solid phases, Reactive transport of actinides. About 60 scientists, technicians and PhD students are employed at the Institute of Radiochemistry. We accomplished many new scientific results in the past year, which are presented in this annual report. Among them only few can be highlighted in this preface. Further progress was achieved in understanding the formation and characterization of uranium containing colloids. The newly installed method of laser-induced breakdown detection was very helpful for the identification of uranium colloids under anoxic conditions. We were very successful in the determination of formation pathways and structure of various actinide complexes. These results contribute to a better understanding of actinide speciation in geo- and bio-systems, especially with respect to the chemical processes on the interfaces. The results achieved in the characterization of the properties, modification, and interaction of the S-layers of Bacillus sphaericus with uranium and some other heavy metals strengthen our hope to use this

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2004

International Nuclear Information System (INIS)

Bernhard, G.

2005-01-01

The Institute of Radiochemistry (IRC), one of the six Institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Motivation and background of our research are environmental processes relevant for the installation of nuclear waste repositories, for remediation of uranium mining and milling sites, and for radioactive contaminations caused by nuclear accidents and fallout. Because of their high radiotoxicity and long half-life the actinides are of special interest. The research is focused on a better understanding of the chemical behavior of actinides in the environment on a molecular level. We will increase our efforts to study both the speciation of actinides on bio-molecular interfaces and their transport in bio-systems. Current topics of our research work are: aquatic chemistry of actinides, actinides in bio-systems, interaction of actinides with solid phases, Reactive transport of actinides. About 60 scientists, technicians and PhD students are employed at the Institute of Radiochemistry. We accomplished many new scientific results in the past year, which are presented in this annual report. Among them only few can be highlighted in this preface. Further progress was achieved in understanding the formation and characterization of uranium containing colloids. The newly installed method of laser-induced breakdown detection was very helpful for the identification of uranium colloids under anoxic conditions. We were very successful in the determination of formation pathways and structure of various actinide complexes. These results contribute to a better understanding of actinide speciation in geo- and bio-systems, especially with respect to the chemical processes on the interfaces. The results achieved in the characterization of the properties, modification, and interaction of the S-layers of Bacillus sphaericus with uranium and some other heavy metals strengthen our hope to use this

Radiochemistry and radiochemical separations. A current bibliography

International Nuclear Information System (INIS)

Bujdoso, E.

1999-01-01

A current bibliography for years 1993-1996 with 159 references was compiled on radiochemistry and radiochemical separations based on the INIS Atomindex. The references are arranged in alphabetical order of first authors. (N.T.)

Topics in nuclear and radiochemistry for college curricula and high school science programs

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

The concern with the current status and trends of nuclear chemistry and radiochemistry education in academic institutions was addressed in a recent workshop. The 1988 workshop considered the important contributions that scientist with nuclear and radiochemistry backgrounds have made and are continuing to make to other sciences and to various applied fields. Among the areas discussed were environmental studies, life sciences, materials science, separation technology, hot atom chemistry, cosmochemistry, and the rapidly growing field of nuclear medicine. It is intent of the organizer and participants of this symposium entitled Topics in Nuclear and Radiochemistry for College Curricula and High School Science Program'' to provide lecture material on topics related to nuclear and radiochemistry to educators. It is our hope that teachers, who may or may not be familiar with the field, will find this collections of articles useful and incorporate some of them into their lectures.

Topics in nuclear and radiochemistry for college curricula and high school science programs

International Nuclear Information System (INIS)

1990-01-01

The concern with the current status and trends of nuclear chemistry and radiochemistry education in academic institutions was addressed in a recent workshop. The 1988 workshop considered the important contributions that scientist with nuclear and radiochemistry backgrounds have made and are continuing to make to other sciences and to various applied fields. Among the areas discussed were environmental studies, life sciences, materials science, separation technology, hot atom chemistry, cosmochemistry, and the rapidly growing field of nuclear medicine. It is intent of the organizer and participants of this symposium entitled ''Topics in Nuclear and Radiochemistry for College Curricula and High School Science Program'' to provide lecture material on topics related to nuclear and radiochemistry to educators. It is our hope that teachers, who may or may not be familiar with the field, will find this collections of articles useful and incorporate some of them into their lectures

CC-3 CAMAC crate controller for IBM PC

International Nuclear Information System (INIS)

Khare, A.N.; Ghodgaonkar, M.D.; Bairi, B.R.

1991-01-01

The specifications and implementation details of CAMAC Crate Controller CC-3 for IBM-PC compatible as a host computer, having capability to transfer high speed data with direct memory access (DMA) scheme and logic to execute CAMAC cycles directly from the crate controller, to implement the block algorithms specified in ANSI/IEEE Std. 683-1976 (Reaff-1981) are described. The maximum data transfer rate measured with 8 bit interface of PC-AT is 240K byte per second. This work is carried out under Seventh Five Year Plan Project on Modernisation of reactor Control Instrumentation and Development of CAMAC and Fastbus Instrumentation. (author). 9 refs., 5 figs., 4 appendixes

Proceedings of 26. annual academic conference of China Chemical Society--modern nuclear chemistry and radiochemistry

International Nuclear Information System (INIS)

2008-08-01

26. annual academic conference of China Chemical Society was held in Tianjing, 13-16 July, 2008. This proceedings is about modern nuclear chemistry and radiochemistry, the contents include: new elements and new nuclides; advanced nuclear chemistry; radiochemistry and national security; new radiopharmaceutical chemistry; modern radiological analytical chemistry and large scientific facilities; radiological environmental chemistry and nuclear radioactive waste; actinide chemistry and transactinide chemistry; radiochemistry and cross discipline, etc.

The composing technique of fast and large scale nuclear data acquisition and control system with single chip microcomputers and PC computers

International Nuclear Information System (INIS)

Xu Zurun; Wu Shiying; Liu Haitao; Yao Yangsen; Wang Yingguan; Yang Chaowen

1998-01-01

The technique of employing single-chip microcomputers and PC computers to compose a fast and large scale nuclear data acquisition and control system was discussed in detail. The optimum composition mode of this kind of system, the acquisition and control circuit unit based on single-chip microcomputers, the real-time communication methods and the software composition under the Windows 3.2 were also described. One, two and three dimensional spectra measured by this system were demonstrated

The composing technique of fast and large scale nuclear data acquisition and control system with single chip microcomputers and PC computers

International Nuclear Information System (INIS)

Xu Zurun; Wu Shiying; Liu Haitao; Yao Yangsen; Wang Yingguan; Yang Chaowen

1997-01-01

The technique of employing single-chip microcomputers and PC computers to compose a fast and large scale nuclear data acquisition and control system was discussed in detail. The optimum composition mode of this kind of system, the acquisition and control circuit unit based on single-chip microcomputers, the real-time communication methods and the software composition under the Windows 3.2 were also described. One, two and three dimensional spectra measured by this system were demonstrated

Study on the Effects of Sample Density on Gamma Spectrometry System Measurement Efficiency at Radiochemistry and Environment Laboratory

International Nuclear Information System (INIS)

Wo, Y.M.; Dainee Nor Fardzila Ahmad Tugi; Khairul Nizam Razali

2015-01-01

The effects of sample density on the measurement efficiency of the gamma spectrometry system were studied by using four sets multi nuclide standard sources of various densities between 0.3 - 1.4 g/ ml. The study was conducted on seven unit 25 % coaxial HPGe detector gamma spectrometry systems in Radiochemistry and Environment Laboratory (RAS). Difference on efficiency against gamma emitting radionuclides energy and measurement systems were compared and discussed. Correction factor for self absorption caused by difference in sample matrix density of the gamma systems were estimated. The correction factors are to be used in quantification of radionuclides concentration in various densities of service and research samples in RAS. (author)

PC imaging system for reactor NDE

International Nuclear Information System (INIS)

Anon.

1987-01-01

PC-based systems have been given recent attention by EPRI to organize and manage inspection data (RP-2405-15, TestPro system); integrate with larger, mainframe computers to maintain dialogue for on-site and remote applications; and, in this project, to aid the operator in providing guidance to render decisions on the data. The PC system configuration for this project consisted of a central processing unit (CPU), a hard disk and a floppy disk, 640K bytes of system memory, a high-resolution graphics card and compatible color monitor, and a mouse for operator interaction with software. The software package was written in FORTRAN under the PC Disk Operating System (PC-DOS) and utilized a graphics package for image display. Application of this package to crack-counterbore discrimination in piping welds was investigated. Present automatic techniques utilize signal features from single, A-scan data to render a decision on whether the reflector is benign (i.e., counterbore, weld root) or a crack. However, experienced manual operators in the field make reliable decisions based on the integrated response from the reflector as the transducer is scanned past the suspicious region. Since this software package could display and manipulate ensemble A-scans, spatial features - similar to those used by experts - were developed as discriminants. Ultrasonic responses from intergranular stress corrosion cracks (IGSCCs) were discovered to vary both in time-of-flight and in their amplitude, whereas counterbore responses were more consistent. The software package contains methods for viewing and quantifying these spatial features

Abstracts book: asia-pacific symposium on radiochemistry-05 (APSORC-05)

International Nuclear Information System (INIS)

2005-01-01

The third asia-pacific symposium on radiochemistry was held in Beijing, China October 17-21, 2005, the major topics of the symposium are as follows: 1. Nuclear reactions (including fission), nuclear decay/structure, and radioactive isotope beams. 2. Sciences of actinide, heavy and superheavy elements. 3. Nuclear analytical techniques using neutrons, ions, X-rays, synchrotron radiation, etc. 4. Applications of nuclear and radiochemical techniques in life sciences; nanomaterial sciences, environmental sciences, archaeological sciences, geo- and cosmo-sciences, isotopic battery, ect. 5. Nuclear probes in new material sciences: Mossbauer, perturbed angular correlations, positron annihilation, etc. 6. Radiopharmaceutical chemistry (including Tc chemistry) and radioisotope production. 7. Nuclear energy chemistry, including fuel reprocessing, nuclear reactor chemistry, uranium conversion, waste management and disposal, etc. 8. Environmental radiochemistry (including nuclides migration) and radioecology. 9. Radiochemical separation methods and chemical speciation; radiation dosimetry and metrology. 10. Issues on education of nuclear and radiochemistry. Total 312 peer-reviewed abstracts were contained in the abstracts book.

A century of radiochemistry. Its growth and development as a unique scientific discipline

International Nuclear Information System (INIS)

Jervis, R.E.

1999-01-01

In recognition of the 1997 anniversary of the first century of radiochemistry, a review is made of its unique contribution to the emergence of nuclear science, its development from the use of very basic chemical techniques initially to a battery of more sophisticated procedures, and its changing role as it has become widely applied in many fields of science. Synergistically, these fields have been able to develop with the aid of radiochemistry while at the same time, radiochemical methods developed to meet the demands of such applications, Among these, during the second half of the century, has been radiochemistry applied to quantitative chemical analysis: RAA or, nuclear analytical chemistry, and typical examples of its use in the authors' laboratory are described, including some recent INAA results on development of novel 'activable' tracer coding for forensic use with specialized and high security materials. The specific contributions, during the century, of Japanese pioneers in radiochemistry are also cited. (author)

Accurate monitoring developed by EDF for FA-3-EPRTM and UK-EPRTM: chemistry-radiochemistry design and procedures

International Nuclear Information System (INIS)

Tigeras, Arancha; Bouhrizi, Sofia; Pierre, Marine; L'Orphelin, Jean-Matthieu

2012-09-01

The monitoring of chemistry and radiochemistry parameters is a fundamental need in nuclear power plants in order to ensure: - The reactivity control in real time, - The barrier integrity surveillance by means of the fuel cladding failures detection and the primary-pressure boundary components control, - The water quality to limit the radiation build-up and the material corrosion permitting to prepare the maintenance, radioprotection and waste operations. - The efficiency of treatment systems and hence the minimization of chemical and radiochemical substances discharges The relevant chemistry and radiochemistry parameters to be monitored are selected depending on the chemistry conditioning of systems, the source term evaluations, the corrosion mechanisms and the radioactivity consequences. In spite of the difficulties for obtaining representative samples under all circumstances, the EPR M design provides the appropriate provisions and analytical procedures for ensuring the reliable and accurate monitoring of parameters in compliance with the specification requirements. The design solutions, adopted for Flamanville 3-EPR M and UK-EPR M , concerning the sampling conditions and locations, the on-line and analytical equipment, the procedures and the results transmission to control room and chemistry laboratory are supported by ALARP considerations, international experience and researches concerning the nuclides behavior (corrosion product and actinides solubility, fission product degassing, impurities and additives reactions also). This paper details the means developed by EDF for making successful and meaningful sampling and measurements to achieve the essential objectives associated with the monitoring. (authors)

Cooperation in education and training in nuclear- and radiochemistry in Europe

International Nuclear Information System (INIS)

John, J.; Čuba, V.; Němec, M.

2014-01-01

In this paper, the motivation, history and status of coordination of education and training in nuclear- and radiochemistry in Europe will be reviewed and correlated to similar activities in other nuclear fields such as the nuclear engineering of radiological protection. The achievements of the Euratom FP7 project 'Cooperation In education in Nuclear CHemistry (CINCH)' will be described in detail. This description will cover both the status review and the development activities of this collaboration. In the status review field, the results of a detailed survey of the universities and curricula in nuclear- and radiochemistry in Europe and Russia will be presented. In the development activities field, the main achievements of the CINCH project will be presented. They are particularly the NukWik - an open platform for collaboration and sharing teaching materials in nuclear- and radiochemistry based on a wiki engine

Radiochemistry in India. A saga of five decades

International Nuclear Information System (INIS)

Manchanda, V.K.; Sungkyunkwan Univ., Suwon

2012-01-01

Radiochemistry in India essentially blossomed under the auspices of the Department of Atomic Energy (DAE) for the last 55 years or so. Major activities in this area are centred at Bhabha Atomic Research Centre, Mumbai (BARC) and Indira Gandhi Centre for Atomic Research, Kalpakkam (IGCAR). Though there were several centers of excellence which were established by renowned radiochemists during the 1960s at the academic institutions in different parts of the country and nurtured by their close associates during the eighties and nineties, their glamour did not last long and only very few have sustained the challenges presented by social and technological upheaval of last five decades. Board of Research in Nuclear Sciences (BRNS), an organ of DAE has been in the forefront for promotion of education and research in nuclear sciences at academic institutions. It sponsors symposia in Nuclear and Radiochemistry (NUCAR), Nuclear Analytical Chemistry (NAC) and Applications of Radioisotopes in Chemistry, Environment and Biology (ARCEB) which are organized periodically to provide a platform for interaction of the radiochemists within and outside DAE. A professional body, viz. Indian Association of Nuclear Chemists and Allied Scientists (IANCAS), formed in early eighties at BARC, Mumbai has been spearheading the campaign to popularize the subject of radiochemistry in schools and colleges through workshops and publishing monographs and thematic bulletins regularly in the area of interest to the radiochemists. During the last five decades, radiochemistry programme at BARC has centered around attaining excellence in basic research utilizing radiations and radioisotopes to unravel various nuclear and chemical phenomena, related to actinides and fission products. This programme encompassed a number of research and development areas such as nuclear fission, nuclear reactions, nuclear probes for materials study, nuclear and chemical properties of actinides, actinide spectroscopy

Radiochemistry at the University of Missouri-Columbia. A joint venture with chemistry, nuclear engineering, molecular biology, biochemistry, and the Missouri University Research Reactor (MURR)

International Nuclear Information System (INIS)

Miller, W.H.; Duval, P.; Jurisson, S.S.; Robertson, J.D.; Wall, J.D.; Quinn, T.P.; Volkert, W.A.; Neumeyer, G.M.

2005-01-01

Missouri University, a recipient of a U.S. Department of Energy Radiochemistry Education Award Program (REAP) grant in 1999, has significantly expanded its education and research mission in radiochemistry. While MU had a viable radiochemistry program through existing faculty expertise and the utilization of the Missouri University Research Reactor, the REAP award allowed MU to leverage its resources in significantly expanding capabilities in radiochemistry. Specifically, the grant enabled the: (1) hiring of a new faculty member in actinide radiochemistry (Dr. Paul Duval); (2) support of six graduate students in radiochemistry; (3) purchase of new radiochemistry laboratory equipment; (4) more extensive collaboration with DOE scientists through interactions with faculty and graduate students, and (5) revised radiochemical curriculum (joint courses across disciplines and new courses in actinide chemistry). The most significant impact of this award has been in encouraging interdisciplinary education and research. The proposal was initiated by a joint effort between Nuclear Engineering and Chemistry, but also included faculty in biochemistry, radiology, and molecular biology. Specific outcomes of the REAP grant thus far are: (1) increased educational and research capabilities in actinide chemistry (faculty hire and equipment acquisition); (2) increased integration of biochemistry and radiochemistry (e.g., radiochemical analysis of uranium speciation in biological systems); (3) stronger interdisciplinary integration of molecular biology and radiochemical sciences (alpha-emitters for treating cancer); (4) new and more extensive interactions with national laboratory facilities (e.g., student internships at LANL and LLBL, faculty and lab scientist exchange visits, analytical measurements and collaboration with the Advanced Photon Source), and (7) new research funding opportunities based on REAP partnership. (author)

Unibert - PC software for radiometric level gauging - the LB440 measuring system

International Nuclear Information System (INIS)

Mann, H.; Bickert, M.

2001-01-01

In almost all industrial branches radiometric measuring systems are being used today for a lot of different tasks. The most common field of this application are level gauging measurements by use of gamma radiation, i.e. for level detection as well as for level gauging over ranges of up to several meters. For our level gauge measuring system LB440 we developed a clearly arranged PC software, which allows starting, measuring and service of the level gauge. Over the RS232-interface the industrial computer can be connected with a Laptop or PC. The software is a supplemental or even a substitute for the operation over the frontpanel. The measuring system can be completely controlled by the Unibert PC-Software, realised by LabVIEW 5.1.1, which offers an interactive graphical user interface. The same functionality as in the ''embedded - software'' is available, completed with some additional functions. (orig.) [de

Forty-five years of radiochemistry education

International Nuclear Information System (INIS)

Preiss, I.L.; Rensselaer Polytechnic Inst., Troy, NY

1993-01-01

H.M. Clark introduced radiochemistry as an undergraduate program at Rensselear in 1947. The development of the course and the companion courses under Clark and Preiss that now form the radiochemical educational experience at RPI is outlined. Prospects for the future directions of the field and the educational requirements are discussed. (author)

Workshop on selected aspects of radiochemistry

International Nuclear Information System (INIS)

1991-11-01

The aspects chosen for the workshop are: isotope preparation, separation methods; radiochemical methods and analyses; environmental protection and radiochemistry; the chemistry of the fifth halogen, astatine. From the 28 contributions presented at the workshop, 24 are of relevance in the INIS and EDB scope and are separately retrievable from the database. (BBR) [de

Reengineering a PC-based System into the Mobile Device Product Line

DEFF Research Database (Denmark)

Zhang, Weishan; Jarzabek, Stanislaw; Loughran, Neil

2003-01-01

There is a growing demand to port existing PC-based software systems to mobile device platforms. Systems running on mobile devices share basic characteristics with their PC-based counterparts, but differ from them in details of user interfaces, application models, etc. Systems running on mobile...... devices must also perform well using less memory than PC-based systems. Mobile devices themselves are different from each other in many ways, too. We describe how we made an existing PC-based City Guide System available on a wide range of mobile devices, in a cost-effective way. We applied "reengineering...... into a product line architecture" approach to achieve the goal. Our product line architecture facilitates reuse via generation. We generate specific City Guide Systems for target platforms including PC, Pocket PC and other mobile devices, from generic meta-components that form the City Guide System product line...

Experience using EPICS on PC platforms

International Nuclear Information System (INIS)

Hill, J.O.; Kasemire, K.U.

1997-03-01

The Experimental Physics and Industrial Control System (EPICS) has been widely adopted in the accelerator community. Although EPICS is available on many platforms, the majority of implementations have used UNIX workstations as clients, and VME- or VXI-based processors for distributed input output controllers. Recently, a significant portion of EPICS has been ported to personal computer (PC) hardware platforms running Microsoft's operating systems, and also Wind River System's real time vxWorks operating system. This development should significantly reduce the cost of deploying EPICS systems, and the prospect of using EPICS together with the many high quality commercial components available for PC platforms is also encouraging. A hybrid system using both PC and traditional platforms is currently being implemented at LANL for LEDA, the low energy demonstration accelerator under construction as part of the Accelerator Production of Tritium (APT) project. To illustrate these developments the authors compare their recent experience deploying a PC-based EPICS system with experience deploying similar systems based on traditional (UNIX-hosted) EPICS hardware and software platforms

Book of Abstracts of IV. All-Polish Conference on Radiochemistry and Nuclear Chemistry

International Nuclear Information System (INIS)

2005-01-01

The different aspects of radiochemistry have been presented and discussed. Especially application of radiochemical methods for preparation of biologically active compounds usable in nuclear medicine and biology as well as for isotope separation and purification have been presented in details. The application of radiochemical methods convenient for environmental monitoring and contamination control have been extensively represented as well

The reestablishment of radiochemistry academic programs in the United States - 59025

International Nuclear Information System (INIS)

Williamson, Craig

2012-01-01

Document available in abstract form only. Full text of publication follows: Despite its importance in national security, medicine, energy, and in waste management radiochemistry education in the United States has gone through two lost decades. In the 1970's ten to fifteen universities were granting between thirty (30) and forty (40) doctoral degrees a year. By the 1980's those numbers had declined to twenty (20) and thirty (30) a year, by the 1990's the numbers had again decreased to below fifteen (15) Ph.D.s a year. In the year 2000, the data shows that only 5 Ph.D.s in radiochemistry were awarded. The causes for this decline is directly attributed to the lack of federal support for an academic discipline that for the most part depends on federal funding. In 2011, it is expected that over thirty (30) doctoral degrees in radiochemistry will be conferred. The turn around in radiochemistry education in the United States can be directly attributed to the support provided by the U.S. Departments of Energy, Defense and Homeland Security. In addition, support has come from the U.S. Nuclear Regulatory Commission and from the National Nuclear Security Administration. The form of this support has been extensive from proposed undergraduate research programs, scholarships, graduate fellowships, junior faculty awards, curriculum awards, and grants

PC-Link historical data base system MODCOMP/IBM at link for neutral particle beam operation

International Nuclear Information System (INIS)

Thurgood, P.

1989-12-01

''PC-Link'' is a combination of hardware and software that connects an IBM PC/AT to a MODCOMP minicomputer. It is designed as an aid to the Neutral Beam operations coordinator during injection into the DIII-D tokamak project. An IBM PC/AT is linked to 4 MODCOMP ''realtime'' acquisition systems, each of which controls 2 neutral particle beam sources. At various points in the shot sequence, data is sent to the IBM PC/AT. This data can then be integrated with the data from the other sources into tables or graphics displays for use by the Beam Coordinator. In this way, the coordinator gets realtime feedback on the relative settings and performance of the sources and can observe trends within a particular source at one location. The PC- Link is used for observing relative timing information and for post shot historical archiving. The concept of the PC-Link was originally proposed several years ago. In April 1988, in-house implementation of the link software was begun. The PC-Link receives approximately 2 Kbytes of data per source per shot. This data is converted from MODCOMP format to IBM PC format and archived to disk. The last 280 shots per source are stored to disk to observe trends. The data can be displayed in a number of formats depending upon the situation. For example, prior to a shot, the beam MODCOMPs are sent timing information from the DIII-D tokamak control system. This data is echoed on the PC in a graphical representation displaying all 8 sources. At the end of the shot, the actual running times are displayed along with the requested settings. Any subset of the Historical data may be displayed either graphically or in tables for realtime comparisons between sources. This system is designed for realtime use, not for complete archiving purposes. This same data is also sent to a VAX computer for full integration into the archive database. This system is easily upgradable and extremely versatile. 4 figs

Radiochemistry and nuclear methods of analysis

International Nuclear Information System (INIS)

Ehmann, W.D.; Vance, D.

1991-01-01

This book provides both the fundamentals of radiochemistry as well as specific applications of nuclear techniques to analytical chemistry. It includes such areas of application as radioimmunoassay and activation techniques using very short-lined indicator radionuclides. It emphasizes the current nuclear methods of analysis such as neutron activation PIXE, nuclear reaction analysis, Rutherford backscattering, isotope dilution analysis and others

Radiochemistry Division annual progress report : 1992

International Nuclear Information System (INIS)

Natarajan, V.; Godbole, S.V.; Iyer, R.H.

1994-01-01

The research and development activities of the Radiochemistry Division during 1992 are briefly described in the form of individual summaries grouped under the headings: 1) Nuclear Chemistry, 2) Actinide Chemistry, 3) Spectroscopy, and 4) Instrumentation. A list of publications numbering 95 by the scientific staff of the Division is also included in the report. (author). 35 figs., 56 tabs

Radiochemistry and nuclear chemistry

CERN Document Server

Choppin, Gregory; RYDBERG, JAN; Ekberg, Christian

2013-01-01

Radiochemistry or nuclear chemistry is the study of radiation from an atomic and molecular perspective, including elemental transformation and reaction effects, as well as physical, health and medical properties. This revised edition of one of the earliest and best-known books on the subject has been updated to bring into teaching the latest developments in research and the current hot topics in the field. To further enhance the functionality of this text, the authors have added numerous teaching aids, examples in MathCAD with variable quantities and options, hotlinks to relevant text secti

PC application in DIII-D neutral beam operation

International Nuclear Information System (INIS)

Gladd, A.S.

1986-01-01

An IBM PC/AT has been implemented to improve operation of the DIII-D neutral beams. The PC system provides centralization of all beam data with reasonable access for online shot-to-shot control and analysis. The PC hardware was configured to interface all four neutral beam host mini-computers, support multi-tasking, and provide storage for approximately one month's accumulation of beam data. The PC software is composed of commercial packages used for performance and statistical analysis (i.e. LOTUS 123, PC PLOT, etc.) host communications software (i.e. PCLINK, KERMIT, etc.) and applications developed software utilizing FORTRAN and BASIC. The objectives of this paper are to describe the implementation of the PC system, the methods of integrating the various software packages, and the scenario for online control and analysis

Portable regional cerebral blood flow system based on IBM PC/AT and microprocessor electronics

International Nuclear Information System (INIS)

Mun, S.K.; Mun, I.K.; Petite, J.; Cohan, S.L.; Fahey, F.H.

1986-01-01

A portable 16-channel reginal cerebral blood flow (rCBF) measuring system has been developed using an IBM PC/AT and new microelectronics to improve processing speed and portability. The detector electronics were developed by Scan Detectronics A/S of Denmark. The counter module contains 18 16-bit counters, each programmable in four different modes. The rate meter has three independent microprocessor controllers for rate meter functions, window controller, and channel controller. The detector electronics and detection parameters can be fully controlled by the host PC/AT. The menu-driven system (Better Basic) assists the operator at each step. The collected data from 16 channels can be processed automatically or postprocessed using more flexible and sophisticated techniques within 20 minutes. The headgear holding 16 sodium iodide detectors is fabricated by modifying a motorcycle helmet

Radiochemistry Division annual progress report for 1977

International Nuclear Information System (INIS)

Iyer, R.H.; Natarajan, P.R.

1979-01-01

The research and development work carried by the Radiochemistry Division of the Bhabha Atomic Research Centre, Bombay, during the calendar year 1977 in the areas of reactor chemistry, actinide chemistry, process chemistry of neptunium and plutonium-239, radioanalytical chemistry and nuclear chemistry has been reported. (M.G.B.)

First meeting on the CRP 'standardized high current solid targets for cyclotron production of diagnostic and therapeutic radionuclides'

International Nuclear Information System (INIS)

Winkel, P. van den

2000-01-01

The Cyclotron Department of the VUB has three groups performing research in the field of target development, production of radionuclides and their application in nuclear medicine. 1. The Physics Group is busy on the optimization of beam parameters, on the determination of cross sections and on neutron spectrometry. 2. The Inorganic Radiochemistry Group performs research on solid target electroplating (Tl, Zn, Cd, Rh ... ), on optimisation of target carrier geometry and cooling and on automated PC-controlled radiochemistry (Tl-201, Ga-67, In-111) and recovery systems and the associated software written in Modula-2 and Visual Basic. 3. The Organic Radiochemistry Group develops new techniques for radiolabelling of organic molecules (fatty acids, neuroleptics, synthetic polypeptides...) useful in diagnostic and therapeutic nuclear medicine. All three groups take part in bulk productions of radionuclides

Program and curriculum development in radiochemistry at Washington State University to educate the next generation of radiochemists in the US

International Nuclear Information System (INIS)

Clark, S.B.; Nash, K.; Benny, P.; Elliston, J.; Buckely, P.

2005-01-01

Washington State University (WSU) has -been the recipient of grant funds from the U.S. Department of Energy's Office of Nuclear Science and Technology to enhance its curriculum and service activities in radiochemistry. These funds have been used to hire new faculty, redesign undergraduate and graduate courses in radiochemistry, and initiate summer programs in radiochemistry for regional college faculty and high school teachers. The funds received from the federal government were matched by investments from the state of Washington. These investments have resulted in many positive changes in the Chemistry Department and the Nuclear Radiation Center at WSU. The number of students graduating from our radiochemistry programs has increased markedly, and the level of additional extra mural funding for our programs has also increased. These activities will be described, and feedback from employers of our radiochemistry graduates will be provided. Plans for future radiochemistry program development will also be discussed.

Radiochemistry Division annual progress report for 1973

International Nuclear Information System (INIS)

Iyer, R.H.; Natarajan, P.R.

1975-01-01

The R and D work carried out in the Radiochemistry Division of the Bhabha Atomic Research Centre, Bombay, during 1973 is reported under the following topical headings : process chemistry (of transuranic elements), radioanalytical chemistry and services, chemical quality control of Pu fuels, heavy element chemistry, nuclear chemistry and instrumentation. The major highlights are : preparation of 238 Pu, non-destructive estimation of Pu by X-ray fluorescence and gamma counting, determining impurities in trace amounts in uranium and plutonium fuels, determination of solubility of PuF 3 in molten fluoride mixtures as a part of the chemical development programme for the molten salt reactor concept, studies on correlation between average total kinetic energy, fission asymmetry and shell structure. (M.G.B.)

ROBL - a CRG beamline for radiochemistry and materials research at the ESRF

International Nuclear Information System (INIS)

Matz, W.; Schell, N.; Bernhard, G.; Claussner, J.; Oehme, W.; Prokert, F.; Reich, T.; Schlenk, R.; Proehl, D.; Funke, H.; Eichhorn, F.; Betzl, M.; Dienel, S.; Brendler, V.; Denecke, M.A.; Krug, H.; Neumann, W.; Huettig, G.; Reichel, P.; Strauch, U.

1999-04-01

The paper describes the Rossendorf Beamline (ROBL) built by the Forschungszentrum Rossendorf at th ESRF. ROBL comprises two different and independently operating experimental stations: a radiochemistry laboratory for X-ray absorption spectroscopy of non-sealed radioactive samples and a general purpose materials research station for X-ray diffraction and reflectometry mainly of thin films and interfaces modified by ion beam techniques. The radiochemistry set-up is worldwide a unique installation at a modern synchrotron radiation source. (orig.) [de

Nobel prize awards in radiochemistry

International Nuclear Information System (INIS)

Adloff, J.P.

2012-01-01

In 1996 the Editors of Radiochimica Acta brought out a special volume of the journal to celebrate the hundredth anniversary of the discovery of radioactivity. On the occasion of the 50 th anniversary of Radiochimica Acta, which follows closely upon the centenary of Marie Curie's second Nobel Prize in 1911, the author has the privilege to informally review 'Radiochemistry and Nobel Prize Awards', including discoveries of radioelements and new fields in chemistry based on radiochemical methods. (orig.)

PC-Link historical data base system MODCOMP/IBM at link for neutral particle beam operation

International Nuclear Information System (INIS)

Thurgood, P.

1989-01-01

PC-Link is a combination of hardware and software that connects an IBM PC/AT to a MODCOMP minicomputer. It is designed as an aid to the Neutral Beam operations coordinator during injection into the DIII-D tokamak project. An IBM PC/AT is linked to 4 MODCOMP realtime acquisition systems, each of which controls 2 neutral particle beam sources. At various points in the shot sequence, data is sent to the IBM PC/AT. This data can then be integrated with the data from the other sources into tables or graphics displays for use by the Beam Coordinator. In this way, the coordinator gets realtime feedback on the relative settings and performance of the sources and can observe trends within a particular source at one location. The PC-Link is used for observing relative timing information and for post shot historical archiving. The concept of the PC-Link was originally proposed several years ago. In April 1988, in-house implementation of the link software was begun. The PC-Link receives approximately 2 Kbytes of data per source per shot. This data is converted from MODCOMP format to IBM PC format and archived to disk. The last 280 shots per source are stored to disk to observe trends. The data can be displayed in a number of formats depending upon the situation. For example, prior to a shot, the beam MODCOMPs are sent timing information from the DIII-D tokamak control system. This data is echoed on the PC in a graphical representation displaying all 8 sources. At the end of the shot, the actual running times are displayed along with the requested settings. Any subset of the Historical data may be displayed either graphically or in tables for realtime comparisons between sources. 4 figs

Design of multichannel counting system-2 for IBM PC and compatibles

International Nuclear Information System (INIS)

Ahmad, Z.; Qamer, R.; Mushtaq, N.

2001-04-01

A multichannel, Counting System 2 (MCCS-2) data acquisition plug-in card for the IBM ISA, MCA and EISA bus architecture has been designed and developed for acquisition of pulsed signal. The card features large dynamic range is achieved with the help of 16-bit pulse counters, fast signal acquisition and a self-testing capability in a single slot card. The MCCS-2 (designed by R and D group, CD) is an upgraded version of MCCS-1 [6]. The MCCS-2 consists of a plug-in interface card (MCCS-PC) for IBM PC and compatibles and a BNC terminal module (MCCS-BNC). The MCCS-PC is address selectable and can simultaneous monitoring ten independent SCA inputs. An on board programmable timer provides elapsed time measurement. A menu-driven software program is developed for data acquisition and timer control. (author)

Nobel prize awards in radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Adloff, J.P. [Strasbourg Univ. (France)

2012-07-01

In 1996 the Editors of Radiochimica Acta brought out a special volume of the journal to celebrate the hundredth anniversary of the discovery of radioactivity. On the occasion of the 50{sup th} anniversary of Radiochimica Acta, which follows closely upon the centenary of Marie Curie's second Nobel Prize in 1911, the author has the privilege to informally review 'Radiochemistry and Nobel Prize Awards', including discoveries of radioelements and new fields in chemistry based on radiochemical methods. (orig.)

7th Nuclear Chemistry, Radiochemistry and Radiation Chemistry Symposium

International Nuclear Information System (INIS)

1988-07-01

The conference heard a total of 58 papers of which 56 were incorporated in INIS, namely those dealing with radioimmunoassay, radiation shielding materials, and radiochemistry of technetium, iodine, uranium, rare earths and actinides. (MR)

The new control system of HLS linac and transport line

International Nuclear Information System (INIS)

Liu Gongfa; Li Weimin; Li Jingyi; Li Chuan; Cheng Liping; Bao Xun; Wang Jigang; Xuan Ke

2005-01-01

The new linac and transport line control system of Hefei Light Source (HLS) is a distributed control system based on EPICS (Experimental Physics and Industrial Control System). Industrial PC (IPC) is widely used as not only Input/Output Controller (IOC) but also device controller. Besides industrial PC, PLC and microcontroller are also used as device controllers. The software for industrial PC based device controller is developed based on VxWorks real-time operating system. The software for PLC and microcontroller are written with ladder software package and assemble language, respectively. PC with Linux and SUN workstation with Solaris are used as operator interfaces (OPI). High level control is made up of some EPICS tools and Tcl/Tk scripts. (authors)

FZR Institute of Radiochemistry. Annual report 1991

International Nuclear Information System (INIS)

Bernhard, G.

1992-04-01

The Research Center Rossendorf Inc. was founded on 1 January 1992 as an Institute of the Blue List. It is financed in equal shares by the Free State of Saxony and the Federal Republic of Germany. The Research Center Rossendorf (FZR) carries out its scientific work in five institutes: Institute of Ion Beam Physics and Materials Research; Institute of Nuclear and Hadronic Physics; Institute of Safety Research; Institute of Bioanorganic and Radiopharmaceutical Chemistry; Institute of Radiochemistry. The presentation of the Institute of Radiochemistry is to be considered a description of working tasks from today's angle. In the course of the formation process up to the end of the year specifications and partly also substantial changes will have to be considered. Although the Research Center Rossendorf has been recently founded, its plans are based of course on the scientific experiences of its staff. The said experiences form the basis for the status report on the lines of work. The last part compiles abridged versions of individual results achieved in 1991, documenting for specialists the work done by the groups of scientists. (orig./BBR) [de

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators system

OpenAIRE

Charrue, P; Bland, A; Ghinet, F; Ribeiro, P

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete XENIX PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specificatio...

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

Science.gov (United States)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

The present PC-based systems at Vietnam Atomic Energy Commission and the Y2K issue

International Nuclear Information System (INIS)

Vuong Huu Tan

1999-01-01

After finishing the IAEA TC Project oil renovation of the Dalat reactor control and instrumentation system, several PC-based systems such as Reactor Data Display System, Area Monitoring System, Reactor Protocol System and so on were newly designed and developed. These systems play an important role for observation, operation and maintenance support of the reactor. Besides, there are also several PC-based systems related to alpha, beta and gamma spectrometers. In this report we present the main functions of each system and discussion oil the Y2K issue in Vietnam and in Vietnam Atomic Energy Commission in particular. (author)

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators system

CERN Document Server

Charrue, P; Ghinet, F; Ribeiro, P

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete XENIX PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specification for the new PowerPC technology, the re-engineering aspects, the interfaces with other CERN wide projects, and the set up of a development environment. This project offers also support for other major SPS and LEP projects interested in the PowerPC microprocessor technology.

Nuclear Forensics and Radiochemistry: Fission

Energy Technology Data Exchange (ETDEWEB)

Rundberg, Robert S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-07

Radiochemistry has been used to study fission since it’ discovery. Radiochemical methods are used to determine cumulative mass yields. These measurements have led to the two-mode fission hypothesis to model the neutron energy dependence of fission product yields. Fission product yields can be used for the nuclear forensics of nuclear explosions. The mass yield curve depends on both the fuel and the neutron spectrum of a device. Recent studies have shown that the nuclear structure of the compound nucleus can affect the mass yield distribution.

System Interconnect Bus (SIB) compatible multi crate CAMAC Controller (CC)

International Nuclear Information System (INIS)

Jha, K.; Borkar, S.P.; Ghodgaonkar, M.D.; D'Costa, C.

2001-01-01

This paper describes design of SIB compatible crate controller with PC interface. SIB is a general-purpose parallel 1/O interface bus used for connecting multi crate system with single PC-interface. The crate controller comprises of a dedicated PC-AT add-on SIB interface card and two width CAMAC module designed to work at station 24 and station 25 of CAMAC crate. PC Interface card (SIBINT) is used for communication between PC/AT host computer and CAMAC Crates. The controller module incorporates a set of registers, logic to generate CAMAC data way timing. Transmission protocol used is RS485 standard. This controller is used for multiple CAMAC crates system, interfaced to PC, using a 60 core twisted pair flat ribbon cable. The crate controller is developed for use in process control, general-purpose data acquisition and control system and laboratory automation. Sustained data transfer rate achieved by controller is 115 Kword/sec each word being 32 bits in length. (author)

Summer Schools in Nuclear and Radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Silber, Herbert B. [San Jose State University

2013-06-20

The ACS Summer Schools in Nuclear and Radiochemistry (herein called “Summer Schools”) were funded by the U.S. Department of Energy and held at San Jose State University (SJSU) and Brookhaven National Laboratory (BNL). The Summer Schools offer undergraduate students with U.S. citizenship an opportunity to complete coursework through ACS accredited chemistry degree programs at SJSU or the State University of New York at Stony Brook (SBU). The courses include lecture and laboratory work on the fundamentals and applications of nuclear and radiochemistry. The number of students participating at each site is limited to 12, and the low student-to-instructor ratio is needed due to the intense nature of the six-week program. To broaden the students’ perspectives on nuclear science, prominent research scientists active in nuclear and/or radiochemical research participate in a Guest Lecture Series. Symposia emphasizing environmental chemistry, nuclear medicine, and career opportunities are conducted as a part of the program. The Department of Energy’s Office of Basic Energy Sciences (BES) renewed the five-year proposal for the Summer Schools starting March 1, 2007, with contributions from Biological and Environmental Remediation (BER) and Nuclear Physics (NP). This Final Technical Report covers the Summer Schools held in the years 2007-2011.

Forschungszentrum Rossendorf, Institute of Radiochemistry. Annual report 2000

International Nuclear Information System (INIS)

2001-05-01

The Institute of Radiochemistry (IRC), one of the five institutes of the Forschungszentrum Rossendorf (FZR) performs basic and applied research in the fields of radiochemistry and radioecology. Main goal is the quantification of the interaction and mobility of radionuclides in the geo- and biosphere. Because of their high radiotoxicity and long half-life the actinides are of special interest. Among the actinides uranium and its manifold interactions plays a major role in the institute's research activities. In addition the interactions of some important long-lived fission and decay products are studied. More than 60 scientists, technicians and PhD students are employed in the Institute of Radiochemistry. The research is focused on understanding the fundamental processes relevant for the behavior of radionuclides in the environment. Main topics are: Aquatic chemistry, Radionuclide interaction with mineral surfaces, Radionuclide interaction with biological materials (microbes and plants), Modeling the radionuclide transport, Development of spectroscopic speciation methods. Further progress was achieved in understanding the interaction mechanism of actinides with humic acids. The coordination numbers and bond distances of the coordinated oxygens have been determined by X-ray absorption spectroscopy for tetra- and pentavalent actinides (Np(IV) and Np(V)). It was shown that the carboxylic groups of the humic acid form monodentate complexes with the neptonyl ions. We extended our laser spectroscopic capabilities by installing a new laser system with ultra-short pulses (130 fs) for fluorescence measurements of organic substances. We intend to gain information on actinide complexes with organic ligands by studying the fluorescence properties of the organics with very short life times. The laser system and the method were successfully validated by the determination of the well-known uranyl-salicylic acid complexation. Although surface complexation concepts are more and more

Fifty years of Erlangen radiochemistry

International Nuclear Information System (INIS)

Morell, W.

2007-01-01

On June 29, 2006, the Radiochemical Laboratory of AREVA NP GmbH (formerly Siemens AG) in Erlangen celebrated its fiftieth anniversary. The occasion was marked by an event attended by more than 1,000 guests, among them Werner Gebauhr, the 85-year-old founder and first head of the Laboratory; the Managing Directors of AREVA NP GmbH, Ralf Gueldner and Ruediger Steuerlein; representatives of universities, research institutions, power utilities, and public authorities. The present head of the Radiochemical Laboratory, Wilfred Morell, sketched the highlights of the work performed over the past fifty years, which ranged from solid-state and very-high-purity materials technologies to development and service activities for nuclear technology. Manfred Erve, head of the Technical Center of AREVA NP GmbH, of which the Radiochemical Laboratory is a part, emphasized the changes in priorities over the past fifty years, which had always been met successfully by Radiochemistry. In the scientific part of the event, Wolfgang Schwarz (E.ON Kernkraftwerk GmbH, KKW Isar), Ulf Ilg (EnBW Kraftwerk AG, KKW Philippsburg), and Hans-Josef Allelein (Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH) explained 3 major subject areas in which Erlangen Radio-chemistry over many years has contributed basic findings (see other articles in this atw issue). On the occasion of the anniversary, a comprehensive booklet was published under the title of '50 Jahre Radiochemie Erlangen - 1956-2006'. (orig.)

Some aspects of research relevant to environment radiochemistry

International Nuclear Information System (INIS)

Chen Shi; Ma Mingxie

1997-01-01

The authors suggest some research aspects relevant to environmental radiochemistry from the view point of environmental protection and radiation protection: the migration behavior of radionuclides, their interaction with environment medium and their speciation in environment. The status and prospect of these aspects and the relationship between them are discussed

Cooperation in education and training in nuclear- and radiochemistry in Europe

International Nuclear Information System (INIS)

Jan John; Jukka Lehto; Teija Koivula; Jon Petter Omtvedt

2015-01-01

The motivation, history and status of coordination of education and training in nuclear- and radiochemistry in Europe are reviewed. The achievements of the Euratom FP7 project 'Cooperation In education in Nuclear CHemistry (CINCH)' are described. Attention is paid to the results of the survey of universities teaching nuclear chemistry and their respective curricula evaluation, to the plan to introduce the EuroMaster in nuclear- and radiochemistry quality label recognized and guaranteed by the European Association for Chemical and Molecular Sciences (EuCheMS), and to CINCH NucWik - an interactive database proposed and implemented as an open structure in the form of a 'Wiki'. (author)

Radiochemistry and nuclear methods of analysis

International Nuclear Information System (INIS)

Ehmann, W.D.; Vance, D.E.

1993-01-01

In comparison with other aspects of physical science, nuclear and radiochemistry are small contributors to the overall scheme of things. Nuclear science is, however, an important player in various aspects of medicine, life sciences, industrial technology, physical sciences, archeometry and art, and theoretical/computational sciences. This new book fills the need for a contemporary text with a good mix of simple introductory theory, experimental methodology, and instrumentation for beginning students of nuclear science

A New PC and LabVIEW Package Based System for Electrochemical Investigations.

Science.gov (United States)

Stević, Zoran; Andjelković, Zoran; Antić, Dejan

2008-03-15

The paper describes a new PC and LabVIEW software package based system forelectrochemical research. An overview of well known electrochemical methods, such aspotential measurements, galvanostatic and potentiostatic method, cyclic voltammetry andEIS is given. Electrochemical impedance spectroscopy has been adapted for systemscontaining large capacitances. For signal generation and recording of the response ofinvestigated electrochemical cell, a measurement and control system was developed, basedon a PC P4. The rest of the hardware consists of a commercially available AD-DA converterand an external interface for analog signal processing. The interface is a result of authorsown research. The software platform for desired measurement methods is LabVIEW 8.2package, which is regarded as a high standard in the area of modern virtual instruments. Thedeveloped system was adjusted, tested and compared with commercially available systemand ORCAD simulation.

XVIII Mendeleev congress on general and applied chemistry. Summaries of reports in five volumes. Volume 5. IV Russian-French symposium Supramolecular systems in chemistry and biology. II Russian-Indian symposium on organic chemistry. International symposium on present-day radiochemistry Radiochemistry: progress and prospects. International symposium Green chemistry, stable evolution and social responsibility of chemists. Symposium Nucleophilic hydrogen substitution in aromatic systems and related reactions

International Nuclear Information System (INIS)

2007-01-01

The 5 volume of the XVIII Mendeleev congress on general and applied chemistry includes summaries of reports on the subjects of sypramolecular systems in chemistry and biology, organic chemistry, modern radiochemistry, green chemistry - development and social responsibility of chemists, nucleophilic hydrogen substitution in aromatic systems and related chemical reactions [ru

Annual report 2009. Institute of Radiochemistry

International Nuclear Information System (INIS)

Bernhard, G.

2010-01-01

The annual report 2009 of the institute of radiochemistry covers the following topics: Part 1: Actinides (metals) in biosystems; Part 2: Actinides in waste repositories. The research projects were aimed to the basic knowledge about coordination of actinide element transport and transfer in the environment, bacteria influence on the immobilization of heavy metals in water and soils, microbial diversity in biofilms and clays, protein applications for biosensors, dominating processes of soil-liquid interfaces, sorption and surface complexation processes.

The alcator C-MOD control system

International Nuclear Information System (INIS)

Bosco, J.; Fairfax, S.

1992-01-01

The Alcator C-MOD experiment includes over 30 engineering and diagnostic subsystems. The control system hardware and software is a mixture of custom and commercial products which includes sensors, signal conditioners, hard-wired controls, programmable logic controllers, displays, a hybrid analog/digital computer, networked personal computers, and networked VAX workstations. This paper describes the computer-based portions of the control system. The control system coordinates all C-MOD systems including power, vacuum, heating and cooling, access control, plasma shape and position control, and diagnostics. Programmable logic controllers (PLC's) are located near each subsystem. The control room is isolated by fiber optics. Functions that are essential to personnel or equipment safety (e.g. access control) are implemented in hardwired logic and monitored but not controlled by the PLC's. The initial configuration will include over 25 Allen-Bradley PLC-5 units. The PLCs in each subsystem are connected to personal computers (PC's) in the control room. The PC's provide graphical displays and operator interface. The Pc's are networked and share process data with each other and with a master control console and a large mimic panel

Teaching of foundations of radiochemistry on chemical faculty of Moscow State University after M.V. Lomonosov. Methodical ensuring of the subject

International Nuclear Information System (INIS)

Luk'yanov, V.B.; Berdonosov, S.S.; Fedoseev, V.M.

1995-01-01

The peculiarities of the lecture course on radiochemistry principles in the Moscow State University after M.V. Lomonosov are considered. The methodical provision of the lectures including the curriculum, methodical aids, tasks for self-control and for lecture control, as well as, summary questionary forms, is discussed. 3 refs

Nuclear and radiochemistry fundamentals and applications

CERN Document Server

Lieser, Karl Heinrich

2001-01-01

his new edition of the best-selling handbook gives a complete and concise description of the latest knowledge on nuclear and radiochemistry as well as their applications in the various fields of science. It is based on over 40 years experience in teaching courses and research.The book is aimed at all researchers seeking sound knowledge about the properties of matter, whether chemists, physicists, medical doctors, mineralogists or biologists. All of them will find this a valuable source of information

Radiochemistry Division annual progress report : 1991

International Nuclear Information System (INIS)

Natarajan, V.; Godbole, S.V.; Iyer, R.H.

1993-01-01

The research and development activities of the Radiochemistry Division during 1991 are briefly described under the headings: (i) Nuclear chemistry, (ii) Actinide chemistry, and (iii) Spectroscopy. In the field of nuclear chemistry, the main emphasis has been on the studies of fission process induced by reactor neutrons and light and heavy ions on actinides and low Z (Z c superconductors. A list of publications by the scientific staff of the Division is given at the end. (author). 31 figs., 49 tabs

Nuclear Forensics and Radiochemistry: Chemistry

Energy Technology Data Exchange (ETDEWEB)

Rundberg, Robert S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-17

The chemical behavior of radioactive elements can differ from conventional wisdom because the number of atoms can be unusually small. Kinetic effects and unusual oxidation states are phenomena that make radiochemistry different from conventional analytic chemistry. The procedures developed at Los Alamos are designed to minimize these effects and provide reproducible results over a wide range of sample types. The analysis of nuclear debris has the additional complication of chemical fractionation and the incorporation of environmental contaminants. These are dealt with through the use of three component isotope ratios and the use of appropriate end members.

The modern trends in radiochemistry and their applications

International Nuclear Information System (INIS)

Cohen, I.M.; Furnari, J.C.

2012-01-01

The utilization of Radiochemistry and Nuclear Chemistry is described, particularly with respect to nuclear analytical techniques and radioisotope applications in several fields. Especially, and in connections with the recent advances of Nuclear Medicine, the present contributions of Radiopharmacy, linked to both diagnostic and therapeutic methods, are outlined. The modern trends and their future are discussed. (authors). [es

5. National Conference on Radiochemistry and Nuclear Chemistry. Abstracts

International Nuclear Information System (INIS)

Fuks, L.

2009-01-01

Held in Krakow-Przegorzaly (24-27 May 2009) 5. National Conference on Radiochemistry and Nuclear Chemistry focused on the following research topics: (a) radioanalytical methods; (b) environmental studies; (c) radiopharmacy; (d) isotopic effects; (e) nuclear safety. Participants presented 6 plenary lectures, 24 communications and 38 posters

Development of PC based control and data acquisition system for photphysics beamline at Indus-1 synchrotron source

International Nuclear Information System (INIS)

Mallick, Manika B.; Somkuwar, Sanjay P.; Ravindranath, S.V.G.; Das, N.C.

2003-12-01

A control and data acquisition system (DAS) has been designed and developed for photophysics beamline facility at Indus-1, CAT, Indore. It consists of two independent DASs for two monochromators e.g. 1-meter Seya-Namioka monochromator developed indigenously and a microcontroller based 1/4 meter Czerny-Turner monochromator procured from M/s CVI Laser. Each DAS performs tasks such as grating movement control, signal detection, digitization and acquisition. For this purpose, hardware has been developed around procured components e.g. stepper motor, driver, photomultiplier tube, counter/timer/DIO card, etc. These components are interconnected through a control and data acquisition unit developed in-house and are being controlled using a PC. User-friendly software has been developed using VC++ to provide modes like move to wavelength, scan wavelength, single step, set parameters, check reference and plot of scan data. The system performance has been tested with standard source (Hg lamp) and found to be satisfactory. Absorption spectrum of benzene and fluorescence spectrum of typical multilayer (Gd 2 O 3 + SiO 2 + Gd 2 O 3 tri-layer) have been recorded with this setup. The stability of the system is excellent and the data recorded at very low beam current, i.e. lower than 8 mA beam current for fluorescence signal, also provides significant information of the sample. The system is being used for characterization of various gaseous and solid-state samples. (author)

Assessment of radiological status of underground tunnel of radiochemistry wing

International Nuclear Information System (INIS)

Patre, D.K.; Thanamani, S.; Ojha, Shashikala; Murali, S.

2012-01-01

Radiochemistry Wing, RLG has design based safety systems for lab exhaust and glove box ventilation exhaust. The respective exhaust headers are routed from the lab exhaust point to the filter house. The concretized underground tunnel runs between Radiochemistry wing, RLG and Filter house about 100 m away. It houses the main exhaust tunnel made of MS, has reportedly developed leakage in the MS lines of exhaust due to ageing. It was indicated by the inadequate ventilation to the lab exhaust which reduced ∼ 10 % of the total exhaust. It was decided to carry out the replacement of main exhaust duct subject to radiological safety and clearance from the regulatory agencies. Since the duct had been in use since past 40 years, HP assessment on contamination status, clearance from local safety committee and related regulatory agency are mandatory. In view of the same, the study on radiological parameters was taken up and the paper describes the results of our radiological surveillance. Proposed replacement work involves approximately estimated surface area of duct as 520 m 2 , volume of the material as 106 m 3 and the weight of material of exhaust duct as 12.5 tons. Underground tunnel of radiochemistry wing consists of 3 main segments. It was monitored thoroughly by radiation survey. Spot air sample was collected during the radiological survey. Around 200 swipes were taken from various portions of the segments and the effluent pipelines. Last two tunnel segment were not approachable. Smear swipes were taken from top, side, bottom and floor of each segment. Calibrated scintillation counters were used for assessment of μ air activity and μ contamination check. Spot air samples were taken during different operations showed no activity. Dose rate in the tunnel was found to be less than 1 μSv/h (0.1 mR/h). The μ contamination levels were found in increasing order from the first segment to the last segment. (0.05 - 0.1 Bq/cm 2 ). Effluent pipelines were found to have

PC-based digital feedback control for scanning force microscope

International Nuclear Information System (INIS)

Mohd Ashhar Khalid

2002-01-01

In the past, most digital feedback implementation for scanned-probe microscope were based on a digital signal processor (DSP). At present DSP plug-in card with the input-output interface module is still expensive compared to a fast pentium PC motherboard. For a magnetic force microscope (MFM) digital feedback has an advantage where the magnetic signal can be easily separated from the topographic signal. In this paper, a simple low-cost PC-based digital feedback and imaging system for Scanning Force Microscope (SFM) is presented. (Author)

Radiochemistry in nuclear power plants

International Nuclear Information System (INIS)

Schwarz, W.

2007-01-01

Radiochemistry is employed in nuclear power plants not as an end in itself but, among other things, as a main prerequisite of optimum radiation protection. Radiochemical monitoring of various loops provides important information about sources of radioactivity, activity distribution in the plant and its changes. In the light of these analytical findings, plant crews are able to take measures having a positive effect on radiation levels in the plant. The example of a BWR plant is used to show, among other things, how radiochemical analyses helped to reduce radiation levels in a plant and, as a consequence, to decrease clearly radiation exposure of the personnel despite higher workloads. (orig.)

Digitally-controlled PC-interfaced Boost Converter for Educational Purposes

DEFF Research Database (Denmark)

Ljusev, Petar; Andersen, Michael A. E.

2004-01-01

This paper describes implementation of a simple digital PID control algorithm for a boost converter using a cheap fixed-point 8-bit microcontroller. Serial communication to a PC server program is established for easier downloading of compensator parameters and current and voltage waveform...

Description of a research reactor control system using a programmable controller

International Nuclear Information System (INIS)

Battle, R.E.

1986-01-01

This paper describes the design features, testing methods, and operational experience of a programmable controller (PC) installed as a neutron flux controller in the Oak Ridge Research Reactor (ORR) at Oak Ridge National Laboratory (ORNL). The PC was designed to control neutron flux from 1 to 105% for three selectable ranges. The PC generates a flux setpoint under operator control, calculates the reactor heat power from flow and temperature signals, calculates a neutron flux calibration factor based on the heat power, and positions a control rod based on the flux-setpoint difference. The programmable controller was tested by controlling an analog computer model of the ORR. The equipment was installed in August 1985, and except for some startup problems, the system has performed well

PC based uranium enrichment analyser

International Nuclear Information System (INIS)

Madan, V.K.; Gopalakrishana, K.R.; Bairi, B.R.

1991-01-01

It is important to measure enrichment of unirradiated nuclear fuel elements during production as a quality control measure. An IBM PC based system has recently been tested for enrichment measurements for Nuclear Fuel Complex (NFC), Hyderabad. As required by NFC, the system has ease of calibration. It is easy to switch the system from measuring enrichment of fuel elements to pellets and also automatically store the data and the results. The system uses an IBM PC plug in card to acquire data. The card incorporates programmable interval timers (8253-5). The counter/timer devices are executed by I/O mapped I/O's. A novel algorithm has been incorporated to make the system more reliable. The application software has been written in BASIC. (author). 9 refs., 1 fig

Radiochemistry methods in DOE Methods for Evaluating Environmental and Waste Management Samples: Addressing new challenges

International Nuclear Information System (INIS)

Fadeff, S.K.; Goheen, S.C.; Riley, R.G.

1994-01-01

Radiochemistry methods in Department of Energy Methods for Evaluating Environmental and Waste Management Samples (DOE Methods) add to the repertoire of other standard methods in support of U.S. Department of Energy environmental restoration and waste management (DOE/EM) radiochemical characterization activities. Current standard sources of radiochemistry methods are not always applicable for evaluating DOE/EM samples. Examples of current sources include those provided by the US Environmental Protection Agency, the American Society for Testing and Materials, Standard Methods for the Examination of Water and Wastewater, and Environmental Measurements Laboratory Procedures Manual (HASL-300). The applicability of these methods is generally limited to specific matrices (usually water), low-level radioactive samples, and a limited number of analytes. DOE Methods complements these current standard methods by addressing the complexities of EM characterization needs. The process for determining DOE/EM radiochemistry characterization needs is discussed. In this context of DOE/EM needs, the applicability of other sources of standard radiochemistry methods is defined, and gaps in methodology are identified. Current methods in DOE Methods and the EM characterization needs they address are discussed. Sources of new methods and the methods incorporation process are discussed. The means for individuals to participate in (1) identification of DOE/EM needs, (2) the methods incorporation process, and (3) submission of new methods are identified

The radiochemistry, a multi-disciplinary science for the 21. century

International Nuclear Information System (INIS)

David, F.

1999-04-01

The basic radiochemistry occupies an avant-garde place in inorganic chemistry. It covers a very vast multi-disciplinary field, important for about 40% of the periodic table. It allows understanding better the periodic classification and it is directly connected with various disciplines: metal physical chemistry, solid compounds, solutions, thermodynamics, etc. The applications are also multi-disciplinary, mainly in nuclear industries but also in analysis, geology, biochemistry, medicine, archaeology, astrophysics. This report is a short variant of the document delivered in 1988 for CNRS. It treats neither all the aspects of radiochemistry or the priorities in this field but points out the main directions of this discipline and the fields of research which should be studied in more details. The content is as follows: - Introduction; - I. Definition and radiochemistry's domain of action; - II. The actinides constitute a particularly interesting series of the periodic table; - III. Research on actinides to be developed; III.1 Metals; III.2 Solid compounds; III.3 Gas compounds; III.4 Chemistry in solution (water ions, oxidation degrees, thermodynamic properties, chemical species in solution, non-aqueous media, chemical kinetics, chemistry at the atom scale); IV. Other radioelements; IV.1 The trans-actinide elements; IV.2 The long-lived fission products; V. Radiochemical methods; VI. Study of the 4f and 5f elements is interesting from the point of view of physico-chemical theories; VII. The heavy elements are implied in the nuclear power production; VII.1 Reprocessing the nuclear fuels; VII.2 Waste management; VIII. Conclusions

IBM-PC based data acquisition system for a laser enhanced ionisation spectrometer using a low cost GPIB card

International Nuclear Information System (INIS)

Sampath Kumar, R.; Ravindranath, S.V.G.

1992-01-01

An IBM-PC based data acquisition system has been developed for the existing laser enhanced ionisation spectrometer in the Division. Here the boxcar averager (type SR 250) which integrates the spectrometer output is interfaced to an IBM-PC, converted into a GPIB controller with the help of a locally available GPIB card, (Dynalog Micro Systems make PCL 848) through the GPIB port of the computer interface module (SR 245). The menu driven software developed in BASIC, triggers the scan in the dye laser through its control port, collects data from the spectrometer, plots, displays and stores it on the hard disc for further use. (author). 6 refs., 18 figs., 2 appendixes

Privacy Impact Assessment for the PC Label System

Science.gov (United States)

The PC Label System collects contact information for individuals with an interest in EPA's Region 1. Learn how this data will be collected in the system, how it will be used, access to the data, the purpose of data collection, and record retention policies

A PC Based Level Indicating Controller Using a Hall Probe Sensor

Directory of Open Access Journals (Sweden)

S. C. Bera

2007-10-01

Full Text Available A PC-based measurement and control of liquid level is a very important part of the modern instrumentation system of a process plant in any process industry. In this measurement and control system, the liquid level is measured by using a suitable level transducer. Among the different types of level transducers for measurement and control of liquid level in storage tank the cheapest one is perhaps the float type sensor and the movement of the float with level is generally converted into the movement of a pointer or that of a flapper or that of a potentiometer. In all of these system float is connected with the output device through a mechanical linkage and thus the measurement is subjected to errors due to wear and tear, friction etc. at the mechanical linkage. Here a non-contact float & magnet type level transducer using hall probe has been described in the present paper. A control system has been designed by using thyristor driven pump as the final control element, the speed of which is controlled by the computer through an opto-isolator unit. Experiments have been performed to find the operational characteristics of the transducer and the control loop. The experimental reports are presented in the paper. A very good performance characteristic has been observed.

Application of programmable controllers to vacuum system interlocks

International Nuclear Information System (INIS)

Lee, G.; Moore, D.

1979-11-01

This paper describes the Doublet III Vacuum Control System in which all input signals and output loads are connected to a programmable controller (PC) for logical interfacing. Input signals derived from CAMAC, control panels, limit switches, etc., are implemented as output signals to CAMAC, vacuum valves, pump motors, etc., according to a logic program stored in the PC memory. The memory can be easily programmed by anyone familar with either Boolean algebra or relay-ladder network diagrams. The program data is entered with the aid of a calculator like, keyboard instrument with LED readout displays. The PC system contains a 1024 word RAM memory with a battery backup system to provide 72 hours protection of contents in case of power failure

Incorporating nuclear and radiochemistry in the traditional undergraduate chemistry program

International Nuclear Information System (INIS)

Robertson, J.D.; Kleppinger, E.W.

1994-01-01

Although many areas of major national need depend critically on professionals trained in nuclear and radiochemistry, there has been a steady decline in both the educational opportunities and student interest in this area. One major factor that has contributed greatly to the lack of student interest in nuclear and radiochemistry is that most undergraduate students in chemistry and other sciences are no longer introduced to these topics. This deficiency in the traditional chemistry curriculum, coupled with the negative public perception towards all things open-quotes nuclear,close quotes has resulted in a serious shortage of individuals with a background in this area. The authors are trying to address this problem by open-quotes educating the educators.close quotes The authors are developing a set of summer workshops to provide faculty from four-year colleges with the curriculum materials, training, and motivation to incorporate these topics on a continuing basis in their traditional undergraduate chemistry curricula. The first series of workshops is scheduled for the summer of 1995

Microfluidic technology for PET radiochemistry

International Nuclear Information System (INIS)

Gillies, J.M.; Prenant, C.; Chimon, G.N.; Smethurst, G.J.; Dekker, B.A.; Zweit, J.

2006-01-01

This paper describes the first application of a microfabricated reaction system to positron emission tomography (PET) radiochemistry. We have applied microfluidic technology to synthesise PET radiopharmaceuticals using 18 F and 124 I as labels for fluorodeoxyglucose (FDG) and Annexin-V, respectively. These reactions involved established methods of nucleophilic substitution on a mannose triflate precursor and direct iodination of the protein using iodogen as an oxidant. This has demonstrated a proof of principle of using microfluidic technology to radiochemical reactions involving low and high molecular weight compounds. Using microfluidic reactions, [ 18 F]FDG was synthesised with a 50% incorporation of the available F-18 radioactivity in a very short time of 4 s. The radiolabelling efficiency of 124 I Annexin-V was 40% after 1 min reaction time. Chromatographic analysis showed that such reaction yields are comparable to conventional methods, but in a much shorter time. The yields can be further improved with more optimisation of the microfluidic device itself and its fluid mixing profiles. This demonstrates the potential for this technology to have an impact on rapid and simpler radiopharmaceutical synthesis using short and medium half-life radionuclides

Radiochemistry and the Study of Fission

Energy Technology Data Exchange (ETDEWEB)

Rundberg, Robert S. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-11-14

These are slides from a lecture given at UC Berkeley. Radiochemistry has been used to study fission since its discovery. Radiochemical methods are used to determine cumulative mass yields. These measurements have led to the two-mode fission hypothesis to model the neutron energy dependence of fission product yields. Fission product yields can be used for the nuclear forensics of nuclear explosions. The mass yield curve depends on both the fuel and the neutron spectrum of a device. Recent studies have shown that the nuclear structure of the compound nucleus can affect the mass yield distribution. The following topics are covered: In the beginning: the discovery of fission; forensics using fission products: what can be learned from fission products, definitions of R-values and Q-values, fission bases, K-factors and fission chambers, limitations; the neutron energy dependence of the mass yield distribution (the two mode fission hypothesis); the influence of nuclear structure on the mass yield distribution. In summary: Radiochemistry has been used to study fission since its discovery. Radiochemical measurement of fission product yields have provided the highest precision data for developing fission models and for nuclear forensics. The two-mode fission hypothesis provides a description of the neutron energy dependence of the mass yield curve. However, data is still rather sparse and more work is needed near second and third chance fission. Radiochemical measurements have provided evidence for the importance of nuclear states in the compound nucleus in predicting the mass yield curve in the resonance region.

Radiochemistry and the Study of Fission

International Nuclear Information System (INIS)

Rundberg, Robert S.

2016-01-01

These are slides from a lecture given at UC Berkeley. Radiochemistry has been used to study fission since its discovery. Radiochemical methods are used to determine cumulative mass yields. These measurements have led to the two-mode fission hypothesis to model the neutron energy dependence of fission product yields. Fission product yields can be used for the nuclear forensics of nuclear explosions. The mass yield curve depends on both the fuel and the neutron spectrum of a device. Recent studies have shown that the nuclear structure of the compound nucleus can affect the mass yield distribution. The following topics are covered: In the beginning: the discovery of fission; forensics using fission products: what can be learned from fission products, definitions of R-values and Q-values, fission bases, K-factors and fission chambers, limitations; the neutron energy dependence of the mass yield distribution (the two mode fission hypothesis); the influence of nuclear structure on the mass yield distribution. In summary: Radiochemistry has been used to study fission since its discovery. Radiochemical measurement of fission product yields have provided the highest precision data for developing fission models and for nuclear forensics. The two-mode fission hypothesis provides a description of the neutron energy dependence of the mass yield curve. However, data is still rather sparse and more work is needed near second and third chance fission. Radiochemical measurements have provided evidence for the importance of nuclear states in the compound nucleus in predicting the mass yield curve in the resonance region.

Experiments for training in nuclear and radiochemistry

International Nuclear Information System (INIS)

Moebius, S.

1985-03-01

An experimental training program for education in Nuclear and Radiochemistry is outlined. Didactical aspects are discussed, the installation of a suitable radiochemical laboratory is described and the precautions for radiation protection summarized. Experiments including theoretical introduction, survey of apparatus and materials involved and experimental procedures are given for the topics of Radiation and Their Measurement, Radiochemical Methods and Application of Radioisotopes. Technical Terms most often used during the course are explained and a comprehensive literature survey is finally compiled. (orig.) [de

Experiments for training in nuclear and radiochemistry

International Nuclear Information System (INIS)

Moebius, S.

1988-01-01

An experimental training program for education in Nuclear and Radiochemistry is outlined. Didactical aspects are discussed, the installation of a suitable radiochemical laboratory is described and the precautions for radiation protection summarized. Experiments including theoretical introduction, survey of apparatus and materials involved and experimental procedures are given for the topics of radiation and their measurement, radiochemical methods and application of radioisotopes. Technical terms most often used during the course are explained and a comprehensive literature survey is finally compiled. (orig.) [de

A CAMAC crate controller KK009 for the Pravetz-16 and IBM PC/XT personal computers

International Nuclear Information System (INIS)

Georgiev, A.; Churin, I.N.

1988-01-01

A CAMAC crate controller and a computer bus adapter for the Pravetz 16 and IBM PC/XT personal computers are described. The following features are included in the controller: operation under program control; access to CAMAC registers treated as memory locations corresponding to given N, A, F; hardware for fast LAM processing and execution of multi-crate commands; device up to 7 crates in one CAMAC system; built-in hardware for controller and crate dataway test

Biomimicry 1: PC.

Science.gov (United States)

Cumberland, D C; Gunn, J; Malik, N; Holt, C M

1998-01-01

The surface properties of stents can be modified by coating them, for example with a polymer. Phosphorylcoline (PC) is the major component of the outer layer of the cell membrane. The haemo- and biocompatibility of a PC-containing polymer is thus based on biomimicry, and has been confirmed by several experiments showing much reduced thrombogenicity of PC-coated surfaces, and porcine coronary artery implants showing no sign of adverse effect. Clinical experience with the PC-coated BiodivYsio appears favourable. The PC coating can be tailored for take up and controlled elution of various drugs for stent-based local delivery, a property which is being actively explored.

The ISOLDE control system

International Nuclear Information System (INIS)

Deloose, I.; Pace, A.

1994-01-01

The two CERN isotope separators named ISOLDE have been running on the new Personal Computer (PC) based control system since April 1992. The new architecture that makes heavy use of the commercial software and hardware of the PC market has been implemented on the 1700 geographically distributed control channels of the two separators and their experimental area. Eleven MSDOS Intel-based PCs with approximately 80 acquisition and control boards are used to access the equipment and are controlled from three PCs running Microsoft Windows used as consoles through a Novell Local Area Network. This paper describes the interesting solutions found and discusses the reduced programming workload and costs that have been obtained. ((orig.))

The ISOLDE control system

Science.gov (United States)

Deloose, I.; Pace, A.

1994-12-01

The two CERN isotope separators named ISOLDE have been running on the new Personal Computer (PC) based control system since April 1992. The new architecture that makes heavy use of the commercial software and hardware of the PC market has been implemented on the 1700 geographically distributed control channels of the two separators and their experimental area. Eleven MSDOS Intel-based PCs with approximately 80 acquisition and control boards are used to access the equipment and are controlled from three PCs running Microsoft Windows used as consoles through a Novell Local Area Network. This paper describes the interesting solutions found and discusses the reduced programming workload and costs that have been obtained.

A PC based thin film dosimeter system

DEFF Research Database (Denmark)

Miller, A.; Hargittai, P.; Kovacs, A.

2000-01-01

A dosimeter system based on the Riso B3 dosimeter film, an office scanner for use with PC and the associated software is presented. The scanned image is analyzed either with standard software (Paint Shop Pro 5 or Excel) functions or with the computer code "Scanalizer" that allows presentation...

Upgradation of an Apple IIe based DC arc atomic emission spectrometer to a PC based system

International Nuclear Information System (INIS)

Sampathkumar, R.; Ravindranath, S.V.G.; Patil, P.B.; Deshpande, S.S.; Saha, T.K.; Handu, V.K.

2004-01-01

The analysis of Uranium metal and its compounds used as reactor fuel for the presence of impurities especially Cd and B which have a high neutron capture cross section is routinely performed in Spectroscopy Division. The DC Arc Atomic Emission Spectrometer in the Division was employing an Apple IIe computer for performing the control and data acquisition jobs. The system was upgraded to a PC based data acquisition system and the necessary software to perform the spectro chemical analysis has been developed. This becomes necessary in a scenario where the commercially available Atomic Emission Spectrometers are no longer equipped with DC arc source. Also the Apple IIe computer which was performing the control and data acquisition has gone obsolete and its spares are no longer available. Therefore, to derive the benefits of using DC arc as excitation source the system was upgraded to a PC based system. This paper describes the upgraded system and the various software features relating to the mode of data acquisition, method of analysis, data processing etc. implemented as required by the analysts. (author)

PC based 8K multichannel analyser for nuclear spectroscopy

International Nuclear Information System (INIS)

Jain, S.K.; Gupta, J.D.; Suman Kumari, B.

1989-01-01

An IBM-PC based 8K multichannel analyser(MCA) has been developed which incorporates all the features of an advanced system like very high throughput for data acquisition in PHA as well as MCS modes, fast real-time display, extensive display manipulation facilities, various present controls and concurrent data processing. The compact system hardware consists of a 2 bit wide NIM module and a PC add-on card. Because of external acquisition hardware, the system after initial programming by PC can acquire data independently allowing the PC to be switched off. To attain very high throughput, the most desirable feature of an MCA, a dual-port memory architecture has been used. The asymmetric dual-port RAM, housed in the NIM module offers 24 bit parallel access to the ADC and 8 bit wide access to PC which results in fast real-time histogramic display on the monitor. PC emulation software is menu driven and user friendly. It integrates a comprehensive set of commonly required application routines for concurrent data processing. After the transfer of know-how to the Electronic Corporation of India Ltd. (ECIL), this system is bein g produced at ECIL. (author). 5 refs., 4 figs

Recent radiochemistry observations at the Riverton and Maybell tailings piles

International Nuclear Information System (INIS)

Smith, A.R.; Moed, B.A.

1982-09-01

Preliminary results are presented from the radiochemistry effort of the Lawrence Berkeley Laboratory integrated study of the inactive uranium mill tailings sites at Riverton, Wyoming and Maybell, Colorado. These results were obtained primarily by use of #betta#-ray spectrometric techniques, and included both field and laboratory application of NaI(Tl) crystal and Ge-semiconductor detector systems. Current interpretation of this evidence indicated there has been downward migration of uranium within the tailings column since its emplacement, and upward movement of several radionuclides from the tailings into the overlying cover material. The mechanisms responsible for these migrations are believed to involve fluid transport, and are further believed to be active at the present time

The USL NASA PC R and D development environment standards

Science.gov (United States)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

The development environment standards which have been established in order to control usage of the IBM PC/XT development systems and to prevent interference between projects being currently developed on the PC's are discussed. The standards address the following areas: scheduling PC resources; login/logout procedures; training; file naming conventions; hard disk organization; diskette care; backup procedures; and copying policies.

High-level PC-based laser system modeling

Science.gov (United States)

Taylor, Michael S.

1991-05-01

Since the inception of the Strategic Defense Initiative (SDI) there have been a multitude of comparison studies done in an attempt to evaluate the effectiveness and relative sizes of complementary, and sometimes competitive, laser weapon systems. It became more and more apparent that what the systems analyst needed was not only a fast, but a cost effective way to perform high-level trade studies. In the present investigation, a general procedure is presented for the development of PC-based algorithmic systems models for laser systems. This procedure points out all of the major issues that should be addressed in the design and development of such a model. Issues addressed include defining the problem to be modeled, defining a strategy for development, and finally, effective use of the model once developed. Being a general procedure, it will allow a systems analyst to develop a model to meet specific needs. To illustrate this method of model development, a description of the Strategic Defense Simulation - Design To (SDS-DT) model developed and used by Science Applications International Corporation (SAIC) is presented. SDS-DT is a menu-driven, fast executing, PC-based program that can be used to either calculate performance, weight, volume, and cost values for a particular design or, alternatively, to run parametrics on particular system parameters to perhaps optimize a design.

Nuclear chemistry and Radiochemistry in the USA

International Nuclear Information System (INIS)

Kronenberg, A.

2004-01-01

Nuclear chemistry and radiochemistry are very young sciences which developed at an extremely brisk pace within a very short period of time after the discovery of nuclear fission in 1938, and caused profound societal changes. In the United States, nuclear chemistry developed very differently from Germany, where nuclear research initially had been banned after the Second World War. The prime mover in the development in the United States was the Manhattan Project, the construction of the atomic bomb. The counteract the impending shortage of qualified personnel, important institutions have begun to establish training and support programs in the field. The National Laboratories in the United States introduced a National Security Internship Program, while the U.S. Department of Energy (DOE) tries to promote cooperation, and thus the training of personnel, by launching programs of its own. Yet, a greater shortage of qualified personnel is becoming apparent. The situation of nuclear chemistry and radiochemistry in the United States can be summarized in the finding that research at the National Laboratories is very wide ranging. It receives sufficient funds from the DOE. However, the National Laboratories show a very high proportion of elderly personnel, a problem which will have to be corrected in the years to come. This may be helped by the Summer Schools financed by the DOE, though a summer school of six weeks cannot replace a sound training in nuclear chemistry of the kind still to be found in Germany. (orig.) [de

Magnetic spectrometer control system

International Nuclear Information System (INIS)

Lecca, L.A.; Di Paolo, Hugo; Fernandez Niello, Jorge O.; Marti, Guillermo V; Pacheco, Alberto J.; Ramirez, Marcelo

2003-01-01

The design and implementation of a new computerized control system for the several devices of the magnetic spectrometer at TANDAR Laboratory is described. This system, as a main difference from the preexisting one, is compatible with almost any operating systems of wide spread use available in PC. This allows on-line measurement and control of all signals from any terminal of a computer network. (author)

Select PC/windows flat to develop data acquisition system

International Nuclear Information System (INIS)

Zhang Jin

1993-01-01

Through needing analysis, and also, considering user's ability of payment, the characteristic of China computer market, the computer developing tending, and the system's compatibility and up grade capability, PC/Windows flat are selected to develop a data acquisition system

IBM PC based automatic drive system for Bulat setup

International Nuclear Information System (INIS)

Luchaninov, A.A.; Tolok, V.T.

1999-01-01

Non-expensive computer drive system for Bulat setup is described. System's hardware consists of IBM PC and conjunction block, providing 12 output channels, Software includes the main program, utilities and technology processes database. System may be used at surface modification processes, especially multilayer multicomponent coatings deposition

Desain dan Implementasi Sistem Kendali CNC Router Menggunakan PC untuk Flame Cutting Machine

Directory of Open Access Journals (Sweden)

Roni Permana Saputra

2012-03-01

Full Text Available This paper focuses on design of router control systems based on computer numerical control (CNC using personal computer (PC implemented in flame cutting machine (FCM. NC-Code entered into the computer translated to be a command signal sent by the PC to a microcontroller to control the end effector’s movement alongthe X and Y axis simultaneously based on linear and circular interpolations calculation on the PC. This control system is implemented on FCM by connecting the output control of the microcontroller with the driver actuator of the FCM in the form of a DC motor. The obtained result is in the form of a CNC router control system prototype to be implemented in the FCM which is capable to perform linear interpolation and circular interpolation. 

Utilizations of intense pulsed neutron source in radiochemistry and radiation chemistry

International Nuclear Information System (INIS)

Shiokawa, Takanobu; Yoshihara, Kenji; Kaji, Harumi; Kusaka, Yuzuru; Tabata, Yoneho.

1975-01-01

Intense pulsed neutron sources is expected to supply more useful and fundamental informations in radiochemistry and radiation chemistry. Short-lived intermediate species may be detected and the mechanisms of radiation induced reactions will be elucidated more precisely. Analytical application of pulsed neutrons is also very useful. (auth.)

Design of double DC motor control system based on DSP

Directory of Open Access Journals (Sweden)

Suo WANG

2017-10-01

Full Text Available Aiming at the problems of speed control, commutation and so on in the multi-motor synchronous control system, based on automatic control technology, a control system with PC as principal computer and DSP as slave computer is designed, which can change dual DC motor speed and steering, as well as select work drive motors. Related hardware and software design of the control system are given. Through serial communication between DSP and PC using PC serial port software, digital control command is sent to the slave computer for controlling dual DC motor to do a series of preset functions. PWM pulse width modulation is used for motor speed regulation, photoelectric encoder is used to measure motor speed by T method, and the motor speed is displayed by the actual waveform. Experimental results show that the system can not only realize the synchronization of dual DC motor speed and steering adjustment, but also select the motor and achieve the dual DC motors synchronization control effect. The control system has certain reliability and effectiveness.

WORKBENCH FOR CONTROL SYSTEMS TRIALS BASED ON VIPA 300 CONTROLLER AND ADVANTECH INPUT/OUTPUT CARD

Directory of Open Access Journals (Sweden)

M. V. Levinskyi

2015-01-01

Full Text Available The topic is about workbench creation for control systems trials based on VIPA 300 industrial PLC and model of control object which is implemented in MatLab Simulink program on PC. Connection between controller and the PC is provided by the Advantech PCI-1711 input/output card of discrete and analog signals. Object identification,control system synthesis, creation of control device structure and its parametrical identification, as a rule, is done on a PC in a modelling environment, e.g. in MatLab. But often, using this PC modelling, the hardware and software features of algorithms which were obtained during system synthesis are not considered in a specific industrial PLC.It is considered a good idea to use a composite version where obtained algorithms are tested in a real industrial PLC and control object is substituted by a model which is working on a PC in real time scale. In this case software realization of algorithms in a specific PLC are fully taken into account and substitution of real control object by itsmodel considerably reduces the costs for carrying out experiments and allows to study the system behavior when control object parameters and modes of operation vary greatly. The creation of workbench stipulates several stages: configuration and programming of industrial PLC VIPA 313 SC, installation and configuration of Advantech PCI- 1711 input/output card, tuning of Simulink modelling environment for working in real time scale using Real-Time Windows Target Library, testing of workbench by using constant and harmonic signals of different frequencies. Work results of virtual stabilization system are compared with combined version. In virtual stabilization system PID governor and control object are implemented in Simulink. In combined version control object is still implemented in Simulink and PID governor - in VIPA 313 SC controller (using functional block FB58 from Step7 standard library.

Metal Detector By Using PIC Microcontroller Interfacing With PC

Directory of Open Access Journals (Sweden)

Yin Min Theint

2015-06-01

Full Text Available Abstract This system proposes metal detector by using PIC microcontroller interfacing with PC. The system uses PIC microcontroller as the main controller whether the detected metal is ferrous metal or non-ferrous metal. Among various types of metal sensors and various types of metal detecting technologies concentric type induction coil sensor and VLF very low frequency metal detecting technology are used in this system. This system consists of two configurations Hardware configuration and Software configuration. The hardware components include induction coil sensors which senses the frequency changes of metal a PIC microcontroller personal computer PC buzzer light emitting diode LED and webcam. The software configuration includes a program controller interface. PIC MikroCprogramming language is used to implement the control system. This control system is based on the PIC 16F887 microcontroller.This system is mainly used in mining and high security places such as airport plaza shopping mall and governmental buildings.

DIOPS: A PC-Based Wave, Tide and Surf Prediction System

National Research Council Canada - National Science Library

Allard, Richard; Dykes, James; Kaihatu, James; Wakeham, Dean

2005-01-01

The Distributed Integrated Ocean Prediciton System (DIOPS) is a PC-based wave tide and surf prediction system designed to provide DoD accurate and timely surf predictions for essentially any world-wide location...

PC Tutor. Bericht uber ein PC-gestutzes Tutorensystem = PC Tutor. Report on a Tutoring System with Personal Computer. ZIFF Papiere 75.

Science.gov (United States)

Fritsch, Helmut

A project was conducted to increase as well as to professionalize communication between tutors and learners in a West German university's distance education program by the use of personal computers. Two tutors worked on the systematic development of a PC-based correcting system. The goal, apart from developing general language skills in English,…

An overview of the evaluation plan for PC/MISI: PC-based Multiple Information System Interface

Science.gov (United States)

Dominick, Wayne D. (Editor); Lim, Bee Lee; Hall, Philip P.

1985-01-01

An initial evaluation plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intend to be used as a blueprint for the evaluation of this system. Each objective of the design project is discussed along with the evaluation parameters and methodology to be used in the evaluation of the implementation's achievement of those objectives. The potential of the system for research activities related to more general aspects of information retrieval is also discussed.

Comprehensive nuclear counting and detector characterisation system for the radiochemistry laboratory

International Nuclear Information System (INIS)

Parthasarathy, R.; Saisubalakshmi, D.; Mishra, G.K.; Srinivas, K.C.; Venkatasubramani, C.R.

2004-01-01

The paper describes a comprehensive nuclear pulse counting system that can cater to up to seven nuclear detector set-ups located in different places in the laboratory. Each detector set up has an interfacing module that conditions the amplifier pulses and transmits them to a common counting system. The microcontroller-based system receives these pulses through a multiplexer and counts the pulses for a user specified preset time. The system has a routine to determine detector plateau characteristics and fix the detector operating voltage. In this mode, the system collects the EHT-versus- counts data in a EHT programmed sequence and plots the profile. The system conducts the counting routine for a stipulated number of times and does all necessary statistical tests to ensure the proper functioning of the detector under test. The system also includes a test routine that checks the performance of the counting system by connecting it to a local pulse generator. The microcontroller based system interacts with a PC through RS232 communication for user interaction and reporting. (author)

Chitosan (biochikol 020 PC) in the control of some ornamental foliage diseases.

Science.gov (United States)

Wojdyła, A T

2004-01-01

Chitosan, (Biochikol 020 PC) a potential elicitor of plant defence and also an active inhibitor of fungal growth was used in experiments. The compound was used at concentrations 0.01 to 0.2% as a plant spray for rose protection against Sphaerotheca pannosa var. rosae, Peronospora sparsa and Diplocarpon rosae, Oidium chrysanthemi and Puccinia horiana on chrysanthemum, against Melampsora epitea on willow. Myrothecium roridum on dieffenbachia and against Lophodermium spp on Scots pine. Effectiveness of this product, applied curatively 2-times at 7-day-intervals after appearance of rose powdery mildew symptoms on most of plant parts, was about 32%. When compound was applied just after the first disease symptoms appearance, after 2-week-protection its effectiveness was about 43-60%. After 4 weeks, effectiveness of chitosan (Biochikol 020 PC) increased and ranged from 67 to 77%. In the control of P. sparsa on rose shrubs, growing in plastic tunnel, chitosan at conc. 0.025% was applied 4 times at weekly intervals. Effectiveness of chitosan against this pathogen was over 72%, similar as standard fungicide. Increase of chitosan (Biochikol 020 PC) concentration resulted in decrease of its effectiveness. In case of D. rosae control, chitosan used 9 times at weekly intervals was applied after first disease symptoms. After 3-week-protection effectiveness of the compound varied from 18 to 60% according to used concentration. After 9 weeks of protection effectiveness of tested product ranged from 16 to 23% and was connected with used concentration. Increase of chitosan concentration resulted in better protection of rose shrubs. Effectiveness of chitosan (Biochikol 020 PC) used 4-times at conc. 0.01 to 0.05% as chrysanthemum spray in the control of Oidium chrysanthemi ranged from 69 to 79%, whereas against Puccinia horiana from 54-97%. Two-time-spraying of willow with rust symptoms (Melampsora epitea) with chitosan at conc. 01-0.04% caused decrease of disease severity from 26 to

Design of dual DC motor control system based on DSP

Science.gov (United States)

Shi, Peicheng; Wang, Suo; Xu, Zengwei; Xiao, Ping

2017-08-01

Multi-motor control systems are widely used in actual production and life, such as lifting stages, robots, printing systems. This paper through serial communication between PC and DSP, dual DC motor control system consisting of PC as the host computer, DSP as the lower computer with synchronous PWM speed regulation, commutation and selection functions is designed. It sends digital control instructions with host computer serial debugger to lower computer, to instruct the motor to complete corresponding actions. The hardware and software design of the control system are given, and feasibility and validity of the control system are verified by experiments. The expected design goal is achieved.

PC data station for Hitachi F-2000 spectrofluorimeter

International Nuclear Information System (INIS)

Yakub Ali, Mohd; Dhoble, A.R.; Jadhav, R.T.; Godbole, S.V.

2004-01-01

The paper describes the PC based data station for stand-alone HIT ACHI F-2000 Spectrofluorimeter, for data acquisition, storage and analysis. The hardware link between the instrument and PC is made through RS232 serial port. The state of art software for control and data management is designed, developed and implemented in Visual Basic (Version 6). The software features on-screen editing of all operation parameters of the instrument and the operational control is achieved by Visual Basic command words communicated through serial port. Using this system, in addition to acquiring and storage of spectral data, it was possible to obtain the normalized absorption spectra of the samples. PC adapted Hitachi F-2000 Spectrofluorimeter can be successfully used for various operations such as photometric detection of UO22+ ions, recording of emission and excitation spectra and time evolution of fluorescence intensity on continuous UV irradiation. The data storage achieved through PC adaptation has also enabled recording of absorption spectra. (author)

Equipment Qualification and Environment Establishment for COTS Dedication of Safety Grade PC

International Nuclear Information System (INIS)

Ahn, Kwang Chul; Bin, Chang Sun; Kwon, Yoon Kwang; Kang, Shin Woo; Koh, Sung Won; Shon, Eui Chan; Jang, Hyun Doo; Song, Il Sup; Lee, Hyun Noh

2010-08-01

Safety grade PCs are required for protection systems of SKN 3 and 4 nuclear power plant and subsequent plants. Commercial grade item (CGI) dedication should be carried out to utilize a commercial PC as a safety grade PC of nuclear power plants. This project is aimed to perform the equipment qualification of the commercial PC, and review and improve the quality system of the PC supplier. As a result of the EQ for the CGI dedication, selected military PCs have passed the environment test, the seismic test, and the EMI test required for the digital controllers of nuclear plants. In addition, a walk-through of the quality system of the PC supplier, ISO 9001, was carried out and the quality system was improved. History data for the PC was gathered. As the analysis of the history data showed that operating experience time of the PC is longer than the plant life time, the history data could be used as an evidence of acceptance. After dedicated according to the CGI dedication process, military rugged PCs could be used for safety grade PCs

PC-based control of a high-voltage injector

International Nuclear Information System (INIS)

Constantin, F.

1998-01-01

The stability of high voltage injectors is one of the major problems in any accelerator system. Most of the troubles encountered in the normal operation of an accelerator are connected with the ion source and associated high voltage platforms, regardless of the source or high voltage generator type. The quality of the ion beam injected in the accelerator strongly depends on the power supplies used in the injector and on the ability to control the non-electrical parameters (gas-flow, temperature, etc.). A wide used method in controlling is based on optical links between high-voltage platform and computer, the adjustments being more or less automated. Although the method mentioned above can be still useful in injector control, a different approach is presented in this work, i.e., the computer itself is placed inside the high-voltage terminal. Only one optical link is still necessary to connect this computer with an user-friendly host at ground potential. Requirements: - varying and monitoring the filament current; - gas flow control in the ion source; - reading the vacuum values; - current and voltage control for the anodic, magnet, extraction, suppression and lens' sources. Even in the high voltage terminal there are compartments with different voltages regardless the floating ground. In our injector the extraction voltage is applied on the top of the ion source including the filament and the anodic voltage. The extraction voltage is of maximum 30 kV. In this situation a second optical link is required to transfer the control for the anodic and magnet source power supply assuming the dedicated computer on the floating ground. One PC is placed inside the high voltage terminal and one PC outside the injector. The optical link (more precisely two optical wires) connects the serial ports. The inside computer is equipped with two multipurpose ADC/DAC and digital I/O card. They permit to read or output DC levels ranging between 0 to 10 volts or TTL signals. The filament

Support for Students, Postdoctoral Fellows and Trainees to Attend Radiochemistry-­Related Symposia at Pacifichem 2015

Energy Technology Data Exchange (ETDEWEB)

Wilbur, Daniel Scott [Univ. of Washington, Seattle, WA (United States). Dept. of Radiation Oncology

2016-02-06

This project was undertaken to meet the growing need for training personnel who will be involved in professional careers requiring knowledge of radiochemistry, such as those working in radionuclide production, and in biological, industrial, medical and environmental fields that use radionuclides in their work. The goal of the project was to provide financial assistance to students and trainees from academic and government institutions (US preferred) to attend selected radiochemistry-­related symposia at the Pacifichem 2015 meeting held in Honolulu, Hawaii in December 2015. The funding, meant to provide a portion of an awardee’s travel cost, was specifically directed at attendance to the following symposia: #363, Isotope production-­ Providing Important Materials for Research and Applications; #215, Chemistry of Molecular Imaging, and #11, Chemistry for Development of Theranostic Radiopharmaceuticals. Those symposia were held December 16th (am & pm: #11, #363), December 17th (am: #11, #363; pm: #275) and December 18th (am & pm: #275). Pacifichem meetings are held every 5 years in Honolulu, Hawaii. The meetings are joint sponsored by a number of Chemistry Societies from Pacific Rim countries. The meetings are composed of a large number of symposia (>300) on a wide variety of topics, which make them similar to small meetings within the larger overall meeting. Therefore, attendance at the three symposia within Pacifichem 2015 was similar to attending a meeting focused entirely on radiochemistry-­related topics. To obtain the financial assistance, the student/trainee: (a) had to be an undergraduate student, graduate student or Postdoctoral Fellow in a physical science department or National Laboratory; (b) had to submit a letter from their supervisor indicating that he/she will be enrolled as a student/trainee at the time of the meeting, and were committed to attending the meeting; and (c) had to submit a resume or curriculum vitae along with a brief statement of

Tablet PC Enabled Body Sensor System for Rural Telehealth Applications

Directory of Open Access Journals (Sweden)

Nitha V. Panicker

2016-01-01

Full Text Available Telehealth systems benefit from the rapid growth of mobile communication technology for measuring physiological signals. Development and validation of a tablet PC enabled noninvasive body sensor system for rural telehealth application are discussed in this paper. This system includes real time continuous collection of physiological parameters (blood pressure, pulse rate, and temperature and fall detection of a patient with the help of a body sensor unit and wireless transmission of the acquired information to a tablet PC handled by the medical staff in a Primary Health Center (PHC. Abnormal conditions are automatically identified and alert messages are given to the medical officer in real time. Clinical validation is performed in a real environment and found to be successful. Bland-Altman analysis is carried out to validate the wrist blood pressure sensor used. The system works well for all measurements.

Scientific conference on inorganic chemistry and radiochemistry devoted to centenary from birthday of academician V.I. Spitsyn. Program of conference and summary of reports

International Nuclear Information System (INIS)

2002-01-01

Program and summaries of reports of the Scientific conference on inorganic chemistry and radiochemistry devoted to the centenary from the birthday of academician V.I. Spitsyn are presented. The conference took place at the Chemical department of the Moscow State University named for M.V. Lomonosov 17 - 18 April, 2002. Part of the reports was devoted to the work of academician V.I. Spitsyn, his investigations into radiochemistry and radiation chemistry. Scientific explorations in the fields of solid chemistry, inorganic and coordination chemistry, radiochemistry and chemical technology are discussed [ru

Nuclear and radiochemistry research: from development to deployment

International Nuclear Information System (INIS)

Tomar, B.S.

2015-01-01

Fundamental research in nuclear and radiochemistry is essential in building the expertise in quality assurance and quality control (QA/QC) of nuclear materials, which in turn is important for harnessing nuclear energy for peaceful purposes. Expansion of nuclear fuel cycle activities throws several new challenges before the nuclear scientists with regard to the chemical quality control, quality assurance, accounting of special nuclear materials, improving the detection limits of the trace elements, etc. Nondestructive assay (NDA) of nuclear materials is important from the point of view of nuclear material accounting and control. The requirement of QA/QC of finished products as well as accounting of special nuclear materials in waste packets can be met through NDA techniques. For this purpose passive gamma and neutron based techniques are employed for Pu based materials. On the other hand, NDA of uranium based fuels need active interrogation methods for quantitative assay in sealed packets, while isotopic composition can be measured using high resolution gamma ray spectrometry in suitable gamma energy region. Some of the other elements, such as, boron in finished products can be assayed using ion beam analysis techniques, such as proton induced gamma emission (PIGE) employing low energy proton beams. In the present talk, a few examples of such challenges and their possible solutions would be discussed. (author)

The PC graphics handbook

CERN Document Server

Sanchez, Julio

2003-01-01

Part I - Graphics Fundamentals PC GRAPHICS OVERVIEW History and Evolution Short History of PC Video PS/2 Video Systems SuperVGA Graphics Coprocessors and Accelerators Graphics Applications State-of-the-Art in PC Graphics 3D Application Programming Interfaces POLYGONAL MODELING Vector and Raster Data Coordinate Systems Modeling with Polygons IMAGE TRANSFORMATIONS Matrix-based Representations Matrix Arithmetic 3D Transformations PROGRAMMING MATRIX TRANSFORMATIONS Numeric Data in Matrix Form Array Processing PROJECTIONS AND RENDERING Perspective The Rendering Pipeline LIGHTING AND SHADING Lightin

VIDEO-PC, SVGA Routines for FORTRAN on PC

International Nuclear Information System (INIS)

1994-01-01

1 - Description of program or function: These primitives are the lowest level routines needed to perform super VGA graphics on a PC. A sample main program is included that exercises the primitives. Both Lahey and Microsoft FORTRAN's have graphics libraries. However, the libraries do not support 256 color graphics at resolutions greater than 320x200. The primitives bypass these libraries while still conforming to standard usage of BIOS. The supported graphics modes depend upon the PC graphics card and its memory. Super VGA resolutions of 640x480 and 800x600 have been tested on an ATI VGA Wonder card with 512 K memory and on several 80486 PC's (unknown manufacturers) at retail stores. 2 - Method of solution: Both Lahey and Microsoft primitives depend upon sending the correct parameters to the PC BIOS (basic input output system) as discussed in the references. 3 - Restrictions on the complexity of the problem: The primitives were developed for 256 color VGA applications. It is known, for instance, that some CGA and 16 color VGA video modes will not operate correctly using these primitives. Potential users should try the test program on their PC/video card combination to determine applicability

Application of thin-layer chromatography in radiochemistry

International Nuclear Information System (INIS)

Maki, Yasuyuki; Murakami, Yukio.

1976-01-01

In relation to the experimental procedures of thin-layer chromatography (TLC) in radiochemistry, the authors explained the preparation and development of radioactive test solutions, the methods of detection by autoradiography of isolated spots and by the calculation of measuring apparatus, and the identification of isolated spots. Next they outlined the carrier-free isolation and purification of nuclides, the quantification in combination with γ-ray spectrum, confirmation of the purity of RI-labeled medical supplies, their application to RI generator, thin-layer electrophoresis, in which electrophoresis and TLC were combined, and the application of this electrophoresis to isolation in recoil chemistry and to analysis and identification in carrier-free chemistry. (Kanao, K.)

Development of the radiation control system for personal permission, status and record

International Nuclear Information System (INIS)

Miyamoto, A.; Yamazaki, H.; Yuki, H.; Nanao, M.; Sugawara, Y.; Ohtsuki, T.

2003-01-01

The radiation control system for automated locks, personal status, and recordings in the database was developed at Laboratory of Nuclear Science (LNS), Tohoku University. It consists of the Programmable Logic Controllers (PLC) for the entrance system and Windows PC. The PLC is controlled with Fins Gateway and Compolet on the Windows PC through an ethernet. The SQL Server 2000 was also installed on the Windows PC for database management. In the system, personal data such as destination, purpose, working hours and radiation dose are stored in the database. Furthermore, monthly report of personal data can easily be printed out by using the system. Personal status can be checked by a status monitor of the accelerator in the operation room and the entrance of the radiation controlled area, etc. (author)

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

Science.gov (United States)

Riley, G.

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

PC based controlled potential coulometric titrator for quantitative analysis of nuclear materials

International Nuclear Information System (INIS)

Manna, A.; Moorthy, A.D.; Bhogale, R.G.

2001-01-01

With increased requirements for process control and accountability of nuclear materials in plutonium reprocessing plants, the PC based controlled potential coulometric titrator was developed which has the capability of automatic quantitative analysis of the samples. The instruments based on electromechanical methods, incorporates an electronic potentiostat, a digital coulometer with wide dynamic range and a PC with a control interface card. The potentiostat is required to control the potential at the working electrode surface as per predetermined controlled voltage with respect to a reference electrode under wide variations in the conductivity and double layer capacitance of the electrochemical cell. The digital coulometer precisely measures the amount of electronic charge taking part in the electrochemical reactions of interest. The software has the facility to carry out three different types of analysis, i.e., primary coulometry, secondary coulometry and coulogram curve tracing. Due to complete analysis of the samples under program control, the human related errors are minimized and a better precision in the results are obtained. It has been possible to obtain an overall precession of better than +/- 0.3% in the determination of plutonium using the instrument. (author)

Exacerbation of experimental autoimmune encephalomyelitis in prion protein (PrPc-null mice: evidence for a critical role of the central nervous system

Directory of Open Access Journals (Sweden)

Gourdain Pauline

2012-01-01

Full Text Available Abstract Background The cellular prion protein (PrPc is a host-encoded glycoprotein whose transconformation into PrP scrapie (PrPSc initiates prion diseases. The role of PrPc in health is still obscure, but many candidate functions have been attributed to the protein, both in the immune and the nervous systems. Recent data show that experimental autoimmune encephalomyelitis (EAE is worsened in mice lacking PrPc. Disease exacerbation has been attributed to T cells that would differentiate into more aggressive effectors when deprived of PrPc. However, alternative interpretations such as reduced resistance of neurons to autoimmune insult and exacerbated gliosis leading to neuronal deficits were not considered. Method To better discriminate the contribution of immune cells versus neural cells, reciprocal bone marrow chimeras with differential expression of PrPc in the lymphoid or in the central nervous system (CNS were generated. Mice were subsequently challenged with MOG35-55 peptide and clinical disease as well as histopathology were compared in both groups. Furthermore, to test directly the T cell hypothesis, we compared the encephalitogenicity of adoptively transferred PrPc-deficient versus PrPc-sufficient, anti-MOG T cells. Results First, EAE exacerbation in PrPc-deficient mice was confirmed. Irradiation exacerbated EAE in all the chimeras and controls, but disease was more severe in mice with a PrPc-deleted CNS and a normal immune system than in the reciprocal construction. Moreover, there was no indication that anti-MOG responses were different in PrPc-sufficient and PrPc-deficient mice. Paradoxically, PrPc-deficient anti-MOG 2D2 T cells were less pathogenic than PrPc-expressing 2D2 T cells. Conclusions In view of the present data, it can be concluded that the origin of EAE exacerbation in PrPc-ablated mice resides in the absence of the prion protein in the CNS. Furthermore, the absence of PrPc on both neural and immune cells does not

Superconducting Coil Winding Machine Control System

Energy Technology Data Exchange (ETDEWEB)

Nogiec, J. M. [Fermilab; Kotelnikov, S. [Fermilab; Makulski, A. [Fermilab; Walbridge, D. [Fermilab; Trombly-Freytag, K. [Fermilab

2016-10-05

The Spirex coil winding machine is used at Fermilab to build coils for superconducting magnets. Recently this ma-chine was equipped with a new control system, which al-lows operation from both a computer and a portable remote control unit. This control system is distributed between three layers, implemented on a PC, real-time target, and FPGA, providing respectively HMI, operational logic and direct controls. The system controls motion of all mechan-ical components and regulates the cable tension. Safety is ensured by a failsafe, redundant system.

Realtime control system for microprobe beamline at PLS

Energy Technology Data Exchange (ETDEWEB)

Yoon, J.C.; Lee, J.W.; Kim, K.H.; Ko, I.S. [Pohang Accelerator Laboratory, POSTECH, Pohang (Korea)

1998-11-01

The microprobe beamline of the Pohang Light Source (PLS) consists of main and second slits, a microprobe system, two ion chambers, a video-microscope, and a Si(Li) detector. These machine components must be controlled remodely through the computer system to make user's experiments precise and speedy. A real-time computer control system was developed to control and monitor these components. A VMEbus computer with an OS-9 real-time operating system was used for the low-level data acquisition and control. VME I/O modules were used for the step motor control and the scalar control. The software has a modular structure for the maximum performance and the easy maintenance. We developed the database, the I/O driver, and the control software. We used PC/Windows 95 for the data logging and the operator interface. Visual C{sup ++} was used for the graphical user interface programming. RS232C was used for the communication between the VME and the PC. (author)

The Department of Energy/American Chemical Society Summer School in Nuclear and Radiochemistry at San Jose State University

International Nuclear Information System (INIS)

Kinard, W.F.; Silber, H.B.

2005-01-01

A Summer School in Nuclear Chemistry sponsored by the U. S. Department of Energy and the American Chemical Society has been held at San Jose State University for the past 20 years. The intent of the program is to introduce outstanding college students to the field of nuclear and radiochemistry with the goal that some of these students will consider careers on nuclear science. The program features radiochemistry experiments along with radiation safety training, guest lectures by well known nuclear scientists and field trips to nuclear chemistry facilities in the San Francisco area. (author)

PC add on card for processing of LSC signals

International Nuclear Information System (INIS)

Jadhav, S.R.; Nikhare, D.M.; Gurna, R.K.; Paulson, Molly; Kulkarni, C.P.; Vaidya, P.P.

2001-01-01

This paper describes PC- add on card developed at Electronics Division for processing of LSC signals. This card uses highly integrated digital and analog circuits, for entire processing of signals available from preamplifiers to get complete beta energy spectrum corresponding to coincident events in Liquid Scintillation Counting. LSC card along with High Voltage PC-add on card gives complete electronics required for LSC system. This card is also used in automatic LSC system along with interface circuits, which are used to control mechanical movements. (author)

PC version of PRIS (Power Reactor Information System)

International Nuclear Information System (INIS)

Fukala, J.; Stanik, Z.; White, D.

1990-05-01

The IAEA has been collecting operating experience data on nuclear power plants in the Member States since 1970. In 1980 a computerized database was established, the IAEA Power Reactor Information System (PRIS). To make PRIS data available to the Member States in a more convenient format, the development of a PC version of PRIS started in 1989

Determination Performance Of Gamma Spectrometry Co-Axial HPGE Detector In Radiochemistry And Environment Group, Nuclear Malaysia

International Nuclear Information System (INIS)

Mei-Woo, Y.

2014-01-01

Gamma Spectrometry System is used to measure qualitatively and quantitatively a gamma emitting radionuclide. The accuracy of the measurement very much depends on the performance specifications of the HPGe detectors. From this study it found that all the seven co-axial HPGe detectors in Radiochemistry and Environment Group, Nuclear Malaysia are in good working conditions base on the verification of performance specifications namely Resolution, Peak Shape, Peak-to-Compton ratio and Relative Efficiency against the warranted value from the manufacturers. (author)

ORPLOT.PC: a graphic utility for ORMGEN.PC and ORVIRT.PC

International Nuclear Information System (INIS)

Inversini, C.; Bryson, J.W.

1986-06-01

ORPLOT.PC is an interactive graphic utility for ORMGEN.PC and ORVIRT.PC. It executes on an IBM PC/XT or PC/AT equipped with hard disk, graphic card, and 512K minimum memory. The program is capable of: (1) displaying finite-element meshes generated by ORMGEN.PC complete with node numbers, element numbers, and boundary conditions; and (2) generating deformed mesh plots, contour plots, line (X-Y) plots, and developed surface plots of ORVIRT.PC output. A zooming feature allows detailed inspection of any subregion. Because simplicity and ease of use were important objectives during program development, all commands are entered interactively using free format. The option of automatic or user-defined scaling for most plots is another convenience. Plot files may be created and written to hard disk for subsequent hardcopy to printer or plotter. 2 refs., 7 figs

Support for the American Chemical Society's Summer Schools in Nuclear and Radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Mantica, Paul F. [Michigan State University

2013-06-20

The ACS Summer Schools in Nuclear and Radiochemistry were held at San Jose State University (SJSU) and Brookhaven National Laboratory (BNL). The Summer Schools offer undergraduate students with U.S. citizenship an opportunity to complete coursework through ACS accredited chemistry degree programs at SJSU or the State University of New York at Stony Brook (SBU). The courses include lecture and laboratory work on the fundamentals and applications of nuclear and radiochemistry. The number of students participating at each site is limited to 12, and the low student-to-instructor ratio is needed due to the intense nature of the six-week program. To broaden the students’ perspectives on nuclear science, prominent research scientists active in nuclear and/or radiochemical research participate in a Guest Lecture Series. Symposia emphasizing environmental chemistry, nuclear medicine, and career opportunities are conducted as a part of the program.

GLCTA control system

International Nuclear Information System (INIS)

Terunuma, N.; Hayano, H.; Higo, T.; Saeki, T.; Suehara, T.; Watanabe, K.

2004-01-01

Research and development for the high power X-band RF technologies have been performed on the GLC Test Accelerator, GLCTA, since fall of 2003. The control system of this facility is based on the PC-Linux servers that handle the CAMAC, VME and PLC modules. Automated RF processing and data accumulation of the RF breakdown have been performed. (author)

IBM PC based real time photon correlator [Paper No.:D2

International Nuclear Information System (INIS)

Kumaravadivelu, C.; Nageswaran, A.; Weling, S. A.

1993-01-01

The design aspects and development of IBM PC based real time photon correlator is presented. This system computes 64 auto-correlation functions in real time. Sample data is 4-bit wide. Correlation functions are computed in hard wired logic using discrete components. A combination of parallel and pipelined architecture is adopted to compute the correlation in realtime. A high speed controller generates the required control signals for the computing hardware and also provides handshake signals to IBM PC to access the computed results. IBM PC bus is extended and interfaced to correlation computing hardware. IBM PC collects the experimental parameters through user friendly menu and initiates the correlation hardware and continues to collect the correlation build ups and displays them on the screen. Extensive test and maintenance features are incorporated into the system. This system is developed for Material Science Division in Indira Gandhi Centre for Atomic Research (IGCAR) to study static and dynamic properties of macro molecules and colloidal particles in dispersion using light scattering technique. It can also be used to study the flow characteristics of sodium in nuclear reactors. It can be used in dynamic neutron scattering experiments. (author). 3 figs., 2 tabs

PC driven integrated system for vacuum making and control

International Nuclear Information System (INIS)

Curuia, Marian; Culcer, Mihai; Brandea, Iulian

2000-01-01

The vacuum systems, are utilised in many technological plants. Some of these plants cover a big area, with high distances between workstations. For this reason the remote control is necessary, but is this not excepts the local control system, which may be performed for local supervision, control or shut down. The utilised software was the package LabView, which is a dedicate software for industrial automation. LabView is a conventional graphic program which has characteristic modules necessary for commands and data measurements from industrial processes. With this software we can simulate the instruments used in automation. The program which was realized has been defined as virtual instrument ( VI ), and it is realized of the 'front panel' computer utility interface and the 'block diagram' source code of the program, in which can be find also the subprograms (subVI) with the icons and the afferent connections. This connections are necessary to connect the electronic drive system to computer. The versatility of the software realised the communication between computer and the afferent modules of electric drive system through the serial port (COM1 or COM2). The main parts of this system are: -electronic drive unit; -interface relay unit; -central processing unit. The entire behaviour of system is progressing under the computer supervision, which accomplishes the following operations: - start and stop command for pump; - the NOMINAL or STAND BY operation command; -taking over of the signal to rotational frequency transducer and displays the results; -command the degassing of pump heater. The command of electric drive system with the virtual instrumentation represents the most modern trend in the field of electronic devices. The virtual device which was achieved offers an complex 'on-line' automation with many possibilities to be extended. (authors)

ERA—European Radiochemists Association: Report on the activities of the Working Party for Nuclear and Radiochemistry of the Federation of European Chemical Societies

Science.gov (United States)

Kolar, Z. I.; Ware, A. R.

2003-01-01

The European Radiochemists Association started almost simultaneously with the appearance of the first issue of the Radiochemistry in Europe newsletter in August 1995. The objective of the European Radiochemists Association (ERA) is to extend and improve communication between radiochemists in Europe through a newsletter. Liaison persons within each country or group exchange details of their activities, set up a diary of relevant international events and exchange details of specialist equipment, facilities and technology. In the year 2000 the Federation of European Chemical Societies decided to form a working party on nuclear and radiochemistry. It is a formalisation of the European Radiochemists Association. Each chemical society is allowed to nominate a member to the Working Party on Nuclear and Radiochemistry. Currently we have 12 nominated members plus two invited and one observer. In addition to the ERA aims and objectives it proposes to put together a syllabus of radiochemistry for undergraduate and post-graduate students—this aspect has been a part of our support of the International Atomic Energy Agency initiative. Also the aim of the working party is to support other working parties and divisions, to press the Federation of the European Chemical Societies for financial structure. To this end an Expression of Interest has been tabled with the Framework 6 Programme for networking within radiochemistry in Europe. The WP will liaise with the International Isotope Society and the International Society on Radiopharmaceutical Chemistry and Biology to seek to communicate and to consider ways of working together.

Organisation in the Harwell Radiochemistry Laboratories for Dealing with Radiation Accidents

Energy Technology Data Exchange (ETDEWEB)

Hudswell, F. [Atomic Energy Research Establishment, Harwell, Didcot, Berks. (United Kingdom)

1969-10-15

The radiochemistry laboratories contain extensive facilities for the handling of large quantities of alpha emitters and beta/gamma active materials. Safety in this area is surveyed by a local safety committee, which has been responsible for the development of both the working rules for the avoidance of radiation accidents and the organisation for dealing with them should they occur. The emergency control organisation within the high activity area is linked with and approved by the site organisation. Local control within the building can be undertaken by any one of a number of senior staff, who is advised by a health physicist, engineer and other scientists, and who delegates executive responsibility for emergency stations to a number of scientific and engineering staff. An incident in the area which affects other areas in the establishment is controlled by the establishment emergency organisation but will also involve the local control post as a source of action and information. Reciprocally, local control may be required to receive evacuees from a remote incident area. Safety manuals and emergency plans are revised periodically. Exercises are mounted several times a year and are followed by discussions of the weaknesses found. Attempts are made to remedy the weaknesses in subsequent exercises. (author)

Implementation of PID Controller in MATLAB for Real Time DC Motor Speed Control System

Directory of Open Access Journals (Sweden)

Manjunatha Reddy H. K.

2011-03-01

Full Text Available In this paper the implementation of PIDC (proportional + integral + derivative controller in MATLAB environment for real time DC motor speed control is presented. The MATLAB environment is chosen because of availability of tool boxes which allows the effective way of implementation and analysis of the control system. The performance of PID controller for different inputs is studied. To establish a communication between PC and process parameter, an indigenous Analog to digital and digital to analog (AD-DA board is designed. This board consists of 12-bit A/D converter and 12-bit D/A converter to facilitate the data acquisition and control. In the present study Advantech make PCI-1751 DIOT card is used to interface AD-DA board to PC externally. The data between the AD-DA board and the PC is communicated through the script file written in MATLAB environment. By applying different standard test commands such as step, square, staircase and triangular, the performance of PID controller is studied. The PID controller provides better system response in terms of transient as well as steady-state performances. The controller parameters are manually tuned (kp=0.232, ki=0.078 and kd=0.035 and the results of the best tuned PID controller are presented.

Application of Ethernet Powerlink for communication in a Linux RTAI open CNC control system

OpenAIRE

Erwiński, Krystian; Paprocki, Marcin; Grzesiak, Lech; Karwowski, Kazimierz; Wawrzak, Andrzej

2013-01-01

In computerized numerical control (CNC) systems, the communication bus between the controller and axis servo drives must offer high bandwidth, noise immunity, and time determinism. More and more CNC systems use real-time Ethernet protocols such as Ethernet Powerlink (EPL). Many modern controllers are closed costly hardware-based solutions. In this paper, the implementation of EPL communication bus in a PC-based CNC system is presented. The CNC system includes a PC, a s...

The readout performance evaluation of PowerPC

International Nuclear Information System (INIS)

Chu Yuanping; Zhang Hongyu; Zhao Jingwei; Ye Mei; Tao Ning; Zhu Kejun; Tang Suqiu; Guo Yanan

2003-01-01

PowerPC, as a powerful low-cost embedded computer, is one of the very important research objects in recent years in the project of BESIII data acquisition system. The researches on the embedded system and embedded computer have achieved many important results in the field of High Energy Physics especially in the data acquisition system. The one of the key points to design an acquisition system using PowerPC is to evaluate the readout ability of PowerPC correctly. The paper introduce some tests for the PowerPC readout performance. (authors)

Proficiency Test Program Involvement as a Tool for External Quality Control for Radiochemistry and Environmental Laboratory, Malaysian Nuclear Agency

International Nuclear Information System (INIS)

Nurrul Assyikeen Mohd Jaffary; Wo, Y.M.; Zal U'yun Wan Mahmood; Norfaizal Mohamed; Abdul Kadir Ishak; Noor Fadzilah Yusof; Jalal Sharib

2016-01-01

As the only Laboratory in Malaysia under the IAEA Analytical Laboratories for the Measurement of Environmental Radioactivity (ALMERA) Network, the Radiochemistry and Environmental Laboratory (RAS), Malaysian Nuclear Agency participates in the proficiency test programmes organised by ALMERA to achieve mutual acceptance of analytical data. The ALMERA has been providing quality support of proficiency tests using sets of different samples matrices and radionuclide levels typically encountered in environmental and food monitoring laboratories. The involvement of RAS laboratory in the IAEA proficiency tests gives opportunity to improve the laboratory capability and personnel skills in the field of radioactivity testing. (author)

Digital video timing analyzer for the evaluation of PC-based real-time simulation systems

Science.gov (United States)

Jones, Shawn R.; Crosby, Jay L.; Terry, John E., Jr.

2009-05-01

Due to the rapid acceleration in technology and the drop in costs, the use of commercial off-the-shelf (COTS) PC-based hardware and software components for digital and hardware-in-the-loop (HWIL) simulations has increased. However, the increase in PC-based components creates new challenges for HWIL test facilities such as cost-effective hardware and software selection, system configuration and integration, performance testing, and simulation verification/validation. This paper will discuss how the Digital Video Timing Analyzer (DiViTA) installed in the Aviation and Missile Research, Development and Engineering Center (AMRDEC) provides quantitative characterization data for PC-based real-time scene generation systems. An overview of the DiViTA is provided followed by details on measurement techniques, applications, and real-world examples of system benefits.

Educational experiments of radiochemistry in the nuclear engineering school

International Nuclear Information System (INIS)

Akatsu, Eiko

1995-06-01

Educational experiments of radiochemistry are described. They were an improvement of educational experiment of burn-up measurement as well as experiments on a solvent extraction, a cation exchange behavior of 60 Co, liquid scintillation spectrometry and half-life determination of 87 Rb, and determination of 137 Cs in sea water. Two or one of the experiments were ordinarily studied, depending the occasional situations, by the students of the general course or of the nuclear engineering course in the Nuclear Engineering School, Nuclear Education Center, JAERI from 1976 to 1994. (author)

University-level education in nuclear and radiochemistry in Slovenia

International Nuclear Information System (INIS)

Smodis, B.

2006-01-01

The status of education in nuclear and radiochemistry in Slovenia is reviewed and elucidated at both undergraduate and graduate levels. It is observed that both the quantity and the quality of studies have deteriorated during recent years/decades, thus following similar trends in the developed countries. Presently, no dedicated study of radioactivity is offered within the country. The main reason for this deterioration is a general decline of interest for studying nuclear sciences and the limited need for such specialization in a small country such as Slovenia. (author)

Radiochemistry Division: triennial progress report (for) 1983-1985

International Nuclear Information System (INIS)

Datta, T.

1987-01-01

The present report includes contributions pertaining to the studies of nuclear and chemical properties of actinides. These studies have been mostly concerned with the basic investigation, besides the research and development work connected with chemical quality control of plutonium-based fuels for trace metallic constituents. The nuclear properties are being studied in the Nuclear Chemistry and Instrumentation Section while the chemical properties are being studied in the Actinide Chemistry Section and the Spectroscopy Section. The work in the Actinide Chemistry Section deals essentially with properties of ions in solutions and preparation of solid compounds, to understand the complexing behaviour of actinides. The work in the Spectroscopy Section is concerned essentially with the study of actinide solids using EPR, TSL and optical spectroscopic techniques. The considerable advances made in the basic study of actinides are reflected in the number of publications in well-known international journals. The research and development work of the Division is fully supported by Instrumentation Group of the Division which looks after the maintenance of instruments of not only the Radiochemistry Division but also the Fuel Chemistry Division and design and fabrication of special electronic instruments needed for the research and development work. (author)

Building up the control system for the superconducting cyclotron

International Nuclear Information System (INIS)

Dasgupta, S.

2005-01-01

Using a distributed processing system, connected through a responsive network was a starting point decision. Such a system has contributed a great deal towards reduction of cabling, independence from real time s/w and simpler and more group-wise distributed s/w development, The top of the 3 tiers is the layer made of a number of workstation PC's to work as consoles, which are connected in a dedicated ethernet control LAN. The virtual middle tier is made of a large no. of industrial PC's which are also hooked to the control LAN. The lowest level is made up of assorted intelligent and smart controllers both commercial and laboratory made. (author)

Modeling and simulation of control system for electron beam machine (EBM) using programmable automation controller (PAC)

International Nuclear Information System (INIS)

Leo Kwee Wah; Lojius Lombigit; Abu Bakar Mhd Ghazali; Muhamad Zahidee Taat; Ayub Mohamed; Chong Foh Yoong

2006-01-01

An EBM electronic model is designed to simulate the control system of the Nissin EBM, which is located at Block 43, MINT complex of Jalan Dengkil with maximum output of 3 MeV, 30 mA using a Programmable Automation Controllers (PAC). This model operates likes a real EBM system where all the start-up, interlocking and stopping procedures are fully followed. It also involves formulating the mathematical models to relate certain output with the input parameters using data from actual operation on EB machine. The simulation involves a set of PAC system consisting of the digital and analogue input/output modules. The program code is written using Labview software (real-time version) on a PC and then downloaded into the PAC stand-alone memory. All the 23 interlocking signals required by the EB machine are manually controlled by mechanical switches and represented by LEDs. The EB parameters are manually controlled by potentiometers and displayed on analogue and digital meters. All these signals are then interfaced to the PC via a wifi wireless communication built-in at the PAC controller. The program is developed in accordance to the specifications and requirement of the original real EB system and displays them on the panel of the model and also on the PC monitor. All possible chances from human errors, hardware and software malfunctions, including the worst-case conditions will be tested, evaluated and modified. We hope that the performance of our model complies the requirements of operating the EB machine. It also hopes that this electronic model can replace the original PC interfacing being utilized in the Nissin EBM in the near future. The system can also be used to study the fault tolerance analysis and automatic re-configuration for advanced control of the EB system. (Author)

A simple optical fibre-linked remote control system for multiple devices

Indian Academy of Sciences (India)

We report on the development of a simple control system which can handle multiple devices through an optical fibre data link. The devices are controlled using a set of DACs through serial data communication via a serial port of a PC. Serial data from the PC get converted to parallel mode using a homemade “serial in ...

Radiochemistry Division annual progress report for 1976

International Nuclear Information System (INIS)

Iyer, R.H.

1978-01-01

An account of the work done in the Radiochemistry Division of the Bhabha Atomic Research Centre, Bombay, during the calendar year 1976 is given. Some of the major highlights are: (1) development of a technique LEADTRAP using lead as a tracer for determination of total uranium and plutonium in the accountability tank in the fuel reprocessing plants, (2) fabrication of a compact unit of each gamma absorptiometer, the acidity monitor and the calorimeter for in-line monitoring of fuel reprocessing streams, (3) design and fabrication of an annular neutron counter, and (4) participation in the international intercomparison experiments PAFEX-II for the determination of plutonium in dissolver solutions and the processing of Ge(Li) gamma spectra, both organised by the IAEA. (M.G.B.)

Control means of the aerodynamic vibration occured in Parallel of PC cable-stayed bridge; PC shachokyo heiretsu keburu no taifu seishin taisaku to sono koka

Energy Technology Data Exchange (ETDEWEB)

Sato, H. [Public Works Research Inst., Tsukuba (Japan); Takeda, T.; Mukai, H. [Kajima Corp., Tokyo (Japan); Oikawa, K. [SE Corp., Tokyo (Japan)

1996-01-30

In recent years, the techniques for the typical PC bridges shown in the title have been considerably developed in Japan. However, occurrence of characteristic vibrations of the parallel cables even at relatively low wind speeds are observed in many cases, for which an effective control means is inevitably required. In this report, an investigation of tests on effectiveness of 4 kinds of vibration control means carried out in a wind tunnel and its results are described. In the test, an elastic model of 3-dimension was used for 5 test cases including a case without any control means, and each case was explained and examined in detail. It was revealed that for a damping system, a considerably large damping effect was necessary to restraint the wake galloping, and the cable distance selected to be 1.5 times smaller or 6 times larger than the cable diameter was effective, and while vibration control wires were effective, the adjustment of the cable vibration frequency was ineffective. It was also pointed out that a further verification would be necessary for the latter 2 control systems as no enough experience was yet accumulated in the actual service. 13 refs., 16 figs., 6 tabs.

Practicum of applied radioactivity and radiochemistry by Herforth and Koch

International Nuclear Information System (INIS)

Herforth, L.; Huebner, K.

1989-01-01

The more-than-thirty-year history of a textbook of the application of radionuclides is described. In many countries the book has been proved useful for teaching specialists in the field of isotope technique. Above this it is accepted as a compendium for uses of radiophysical and radiochemical methods in science and industry. For 1991 a new, completely revised edition is planned entitled HERFORTH/KOCH Praktikum der angewandten Radioaktivitaet und Radiochemie (HERFORTH/KOCH Practicum of Applied Radioactivity and Radiochemistry). (author)

Chemistry and radiochemistry of As, Re and Rh isotopes relevant to radiopharmaceutical applications: high specific activity radionuclides for imaging and treatment.

Science.gov (United States)

Feng, Yutian; Phelps, Tim E; Carroll, Valerie; Gallazzi, Fabio; Sieckman, Gary; Hoffman, Timothy J; Barnes, Charles L; Ketring, Alan R; Hennkens, Heather M; Jurisson, Silvia S

2017-10-31

The chemistry and radiochemistry of high specific activity radioisotopes of arsenic, rhenium and rhodium are reviewed with emphasis on University of Missouri activities over the past several decades, and includes recent results. The nuclear facilities at the University of Missouri (10 MW research reactor and 16.5 MeV GE PETtrace cyclotron) allow research and development into novel theranostic radionuclides. The production, separation, enriched target recovery, radiochemistry, and chelation chemistry of 72,77 As, 186,188 Re and 105 Rh are discussed.

PC based Thyroid uptake system for the National Health System

International Nuclear Information System (INIS)

Arista Romeo, Eduardo; Ateche Diaz, Raul; Alonso Abad, Dolores

2003-01-01

a measurement detection system is presented to be used in Iodine Thyroid Uptake Studies. It consists of three elements the detector with its collimator, a blind measurement module and the application software. The measurements module communications through a RS-232 serial interface to the PC where the applications software Detect resides. The software was designed according to the principles ob object oriented programming using C++ language. It automatically fixes spectrometric measurement parameters and besides patient measurement also performs statistical analysis of a batch of samples, It possesses a Paradox database with all information of measured patients and an on line help with the system options

VENTURE-PC 1.1, Reactor Analysis System with Sensitivity and Burnup

International Nuclear Information System (INIS)

2002-01-01

1 - Description of program or function: The VENTURE program solves the usual neutronics eigenvalue, adjoint, fixed source, and criticality search problems. It treats up to three dimensions, maps power density, and does first-order perturbation analysis at the macroscopic cross section level. The BURNER code solves the nuclide chain equations to estimate the nuclide concentrations and burnup at the end of an exposure time or after a shutdown period. This package is based on the CCC-459/BOLD VENTURE IV code system developed at Oak Ridge National Laboratory. In January 1989 the University of Cincinnati contributed the first VENTURE-PC package to RSICC's collection. It was a subset of the mainframe version consisting of the VENTURE and BURNER modules plus several processing modules. VENTURE-PC was distributed as CCC-459 until July 1997 when a new version (with updated source code compatible with newer FORTRAN-77 compilers, some revisions, and extensions to solve much larger problems) was contributed by Argonne National Laboratory. The principle code modules included in the VENTURE-PC system are: VENTURE: Multigroup neutronics finite-difference diffusion theory. BURNER: Depletion calculation for reactor core analysis. Other modules within VENTURE-PC are: DVENTR: Venture input processor; DCRSPR: Neutron cross section processor; DUTLIN: Control file (CNTRL) input processor; DCMACR: Citation format cross section input processor; CRXSPR: Cross section processor; DENMAN: Fuel repositioning module. In August of 1999, Argonne again contributed an updated version of the code which overcomes problem size constraints caused by binary record length limits inherent to the Fortran 90 compiler. The need for long records is detected and avoided by sub-blocking them. Also, the latest Fortran 95 compiler offers substantial speed gains on the newest processors. The source code is updated to be compatible with either Fortran 90 or Fortran 95. In August 2002, the package was updated with

The design of PC/MISI, a PC-based common user interface to remote information storage and retrieval systems. Presentation visuals. M.S. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

Science.gov (United States)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

This Working Paper Series entry represents a collection of presentation visuals associated with the companion report entitled, The Design of PC/MISI, a PC-Based Common User Interface to Remote Information Storage and Retrieval Systems, USL/DBMS NASA/RECON Working Paper Series report number DBMS.NASA/RECON-15. The paper discusses the following: problem definition; the PC solution; the goals of system design; the design description; future considerations, the research environment; conclusions.

Training Grant in Radiochemistry and Radiotracer Development. Design and Synthesis of Molecular and Nanoparticulate Probes

Energy Technology Data Exchange (ETDEWEB)

Hanson, Robert N. [Northeastern Univ., Boston, MA (United States)

2015-01-15

Original overall objective was to develop a training program within the Department of Chemistry and Chemical Biology that would provide an experience in radiochemistry. A combination of educational and research experiences would prepare organic chemistry graduate students to enter the field.

Radiochemistry Division annual progress report: 1988

International Nuclear Information System (INIS)

1990-01-01

The report covers the research and development (R and D) work carried out by Radiochemistry Division, Bhabha Atomic Research Centre, Bombay during the period 1987-1988. The R and D work is reported in the form of individual summari es grouped under the headings: (1)Actinide Chemistry, (2)Nuclear Chemistry, and (3)Spectroscopy. Some of the highlights of the work are studies on : (a)solvent extraction and complexation behaviour of actinides, (b)helium ion induced fission of 238 U and 165 Ho and fission yield of 252 Cf(sf), (c)separation of rare earths from fission products, (d)positron annihilation spectroscopy of high Tc superconductors, and (e)EPR spectroscopy of high Tc superconductors. Radioanalytical services and radiation sources given to the other Divisions and Organisations are listed. A list of publications and symposia papers by scientists of the Division is also given. 45 figs., 49 tabs

Status: nuclear and radiochemistry discipline

International Nuclear Information System (INIS)

Ramakumar, K.L.

2013-01-01

There is no universally accepted definition for the term 'nuclear chemistry'. We may regard nuclear chemistry as an interdisciplinary subject with roots in physics, biology, and chemistry. The basic aspects include among others (i) nuclear reactions and energy levels, (ii) the types and energetics of radioactive decay, (iii) the formation and properties of radioactive elements, (iv) the effect of individual isotopes on chemical and physical properties, and (v) the effects of nuclear radiation on matter. Research in (i) and (ii) is often indistinguishable in purpose and practice from that in nuclear physics, although for nuclear chemists, chemical techniques may play a significant role. (iii) and (iv) can be classified as radiochemistry and isotope chemistry, while (v) falls in the classification of radiation chemistry. There is an urgent need in India also to have similar mechanism. Different universities, research organizations and the education administrators should join hands to address this issue in a focused manner. This is all the more needed urgently as the nuclear power programme and other applications are expected to increase many fold in coming years

Development of a new ALWR control concept using a PC-based interactive environment

International Nuclear Information System (INIS)

Godbole, S.S.; Eschbach, S.L.; Gabler, W.E.; Brown, R.J.

1988-01-01

This paper describes a new control concept for an advanced light water reactor (ALWR) and the personal computer (PC) based environment on which it was developed. In this concept, a mathematical model of the plant is used to calculate the demands and certain setpoints. The model takes into account stored energy and mass, and plant interactions, and thus the calculated demands represent dynamic balance between subsystems. Corrections to these demands based on certain key measurements are determined to account for deviation between the model and the plant and to keep the plant away from protection and operating limits. The expected results are smoother plant maneuvers and runbacks and fewer challenges to safety systems

Application of the principle of supramolecular chemistry in the fields of radiochemistry and radiation chemistry

International Nuclear Information System (INIS)

Shen Xinghai; Chen Qingde; Gao Hongcheng

2008-01-01

Supramolecular chemistry, one of the front fields in chemistry, is defined as 'chemistry beyond the molecule', bearing on the organized entities of higher complexity that result from the association of two or more chemical species held together by intermolecular forces. This article focuses on the application of the principle of supramolecular chemistry in the fields of radiochemistry and radiation chemistry. The following aspects are concerned: (1) the recent progress of supramolecular chemistry; (2) the application of the principle of supramolecular chemistry and the functions of supramolecular system, i.e., recognition, assembly and translocation, in the extraction of nuclides; (3) the application of microemulsion, ionic imprinted polymers, ionic liquids and cloud point extraction in the enrichment of nuclides; (4) the radiation effect of supramolecular systems. (authors)

Integrated research training program of excellence in radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Lapi, Suzanne [Washington Univ., St. Louis, MO (United States)

2015-09-18

The overall goal of this “Integrated Research Training Program of Excellence in Radiochemistry” is to provide a rich and deep research experience in state-of-the-art radiochemistry and in the fundamentals of radioisotopic labeling and tracer methodology to develop researchers who are capable of meeting the challenges of designing and preparing radiotracers of broad applicability for monitoring and imaging diverse biological systems and environmental processes. This program was based in the Departments of Radiology and Radiation Oncology at Washington University Medical School and the Department of Chemistry at the University of Illinois at Urbana Champaign, and it was initially directed by Professor Michael J. Welch as Principal Investigator. After his passing in 2012, the program was led by Professor Suzanne E. Lapi. Programmatic content and participant progress was overseen by an Internal Advisory Committee of senior investigators consisting of the PIs, Professor Mach from the Department of Radiology at Washington University and Professor John A. Katzenellenbogen of the Department of Chemistry at the University of Illinois. A small External Advisory Committee to give overall program guidance was also constituted of experts in radiolabeled compounds and in their applications in environmental and plant science.

Radiochemistry programme : biennial progress report (1988 - 1989)

International Nuclear Information System (INIS)

1991-01-01

The Research and Development activities of the Radiochemistry Division of Indira Gandhi Centre for Atomic Research, Kalpakkam during the period 1988-89 are desribed in the form of summaries. The main thrust of R and D activities is on fast breeder reactor technology. The summarises are arranged under the headings : (1) Chemistry of Liquid Alkali Metals, (2) High Temperature Chemistry of Advanced Materials, (3) Chemistry of Nuclear Fuel Reprocessing, (4) Post-Irradiation analysis and Nuclear Chemistry, (5) Analytical Characterisation of Materials, (6) Analytical Services and (7) Instrumentation and Mechanical Services. At the end, a list of publications by scientists of the Division published during the report period is given. The list includes papers published in journals, papers presented at various symposia, conferences etc, and technical reports. (author). tabs., figs

USL/DBMS NASA/PC R and D project system testing standards

Science.gov (United States)

Dominick, Wayne D. (Editor); Kavi, Srinu; Moreau, Dennis R.; Yan, Lin

1984-01-01

A set of system testing standards to be used in the development of all C software within the NASA/PC Research and Development Project is established. Testing will be considered in two phases: the program testing phase and the system testing phase. The objective of these standards is to provide guidelines for the planning and conduct of program and software system testing.

Vertical vibration control system for PC cable-stayed bridge during cantilever construction; Shuketa jogedo seishin sochi ni yoru haridashi sekoji no PC shachokyo no seishin

Energy Technology Data Exchange (ETDEWEB)

Oshio, M.; Nakano, R.; Niihara, Y.; Yano, K.; Takeda, T. [Kajima Corp., Tokyo (Japan)

1995-12-20

A PC cable-stayed bridge under extension construction having long span length may have long-cycle vibration generated because of wind. The vibration puts workers working on main girders into a state of seasick causing the workability to drop. Therefore, with an objective to reduce vibration occurring on the main girders during construction, discussions were given on application of an active type vertical vibration absorbing device. The vibration absorbing device is an active system that a weight is driven vertically by a hydraulic actuator. The device was developed with a target that damping ratio when a maximum extension is 120 m becomes three times that when no vibration is absorbed for a 5-span continuous PC cable-stayed bridge with a length of 675 m, a central span of 260 m, and a width of 11 m. A cage housing the weight is connected with the actuator at its top by using pins, and the weight is supported being suspended from the top of the actuator. Vibration is absorbed by utilizing reactive force generated when the weight is driven vertically by the hydraulic actuator. The hydraulic actuator contains a gas spring that supports the dead weight of the weight. Experiments have verified the effectiveness of the vertical vibration absorbing device. 4 refs., 12 figs., 3 tabs.

Emulation of MS DOS Operational System on the Autonomous Crate-Controller with I8086 microprocessor

International Nuclear Information System (INIS)

Hons, Z.; Cizek, P.; Streit, V.

1988-01-01

KM-DOS operating system for CAMAC autonomous crate-controller based on Intel 8086/8087 microprocessor connected with Pravec-16 IBM PC is described. The KM-DOS system fully emulates the MS DOS environment on the CAMAC controller. Thus ASSEMBLER, FORTRAN, C and PASCAL programs compiled and linked on IBM PC and compatible can be run on the CAMAC controller and parall work of both computers is enabled

Data acquisition and control system for quadrupole mass spectrometer using an add-on card to an IBM PC

International Nuclear Information System (INIS)

Paal, A.; Szadai, J.; Szekely, G.

1991-01-01

An RF/DC unit, a dedicated interface card and the PCQMS software was designed to upgrade the existing quadrupole mass spectrometer of ATOMKI series Q300C to Q300PC. The new units and the software features are described. Display modes, all in high resolution graphics are provided to include ion monitoring table, ion monitoring analog, intensity vs time or temperature, scan bargraph and scan analog. The quadrupole mass spectrometer performance has been improved by the new modifications for data acquisition and control to be accomplished automatically. (R.P.) 3 refs.; 4 figs

The American Chemical Society's Division of Nuclear Chemistry and Technology's summer schools in nuclear and radiochemistry

International Nuclear Information System (INIS)

Peterson, J.R.

1997-01-01

This successful educational program in nuclear and radiochemistry for advanced undergraduate students is described. Funding from the U.S. Department of Energy supports 24 fellowships for participants in the intensive six-week programs at San Jose State University (CA) and Brookhaven National Laboratory (NY). Students are provided transportation to and from the school site, room and board, books, lab supplies, and six units of college credit. The instructional program consists of lectures and laboratory exercises that cover the fundamentals of nuclear theory, radiochemistry, nuclear instrumentation, radiological safety, and applications in research, medicine, and industry. Guest lectures and field trips broaden the students' exposure to nuclear science. Assistance is provided in the following year to those students who wish to join a research project at a university or national laboratory, and thereafter, in their applications to graduate or professional school. (author)

Radiochemistry Division annual progress report : 1990

International Nuclear Information System (INIS)

Iyer, R.H.

1992-01-01

This progress report provides an account of the research and development activities of the Radiochemistry Division during the year 1990 in the areas of nuclear chemistry, actinide chemistry and spectroscopy. The main area of work in nuclear chemistry is centered around the fission process induced by reactor neutrons, and light and heavy ions on actinides and low Z (Z<80) elements. Actinide chemistry research is concerned mostly with extraction, complexation and separation of actinide ions from aqueous media using a variety of organic reagents under different experimental conditions. Spectroscopic studies include development and optimisation of chemical/analytical methods for separation and determination of trace metallic impurities and rare earths in fuel materials and EPR and microwave studies on several compounds to understand their superconducting, structural and magnetic properties. A list of publications by the scientific staff of the Division during 1990 is also given in the report. (author). 45 figs., 44 tabs

Ion and solvent diffusion and ion conduction of PC-DEC and PC-DME binary solvent electrolytes of LiN(SO2CF3)2

International Nuclear Information System (INIS)

Hayamizu, Kikuko; Aihara, Yuichi

2004-01-01

Two binary mixed solvent systems typically used for lithium batteries were studied by measuring the self-diffusion coefficients of the solvent, lithium ion and anion, independently by using the multi-nuclear pulsed field-gradient spin-echo (PGSE) 1 H, 7 Li and 19 F NMR method. One system was propylene carbonate (PC) and diethyl carbonate (DEC) system and the other binary system was PC and 1,2-dimethoxyethane (DME), and the lithium salt used was LiN(SO 2 CF 3 ) 2 (LiTFSI). The relative ratio of the PC was changed from zero (pure DME and DEC) to 100% (pure PC) in the DME-PC and the DEC-PC systems, respectively. The self-diffusion coefficients of the solvents were measured with and without the lithium salt, and the two solvents had almost the same diffusion coefficient in the DEC-PC system, while DME diffused faster than PC in the DME-PC system. In the electrolytes the solvents diffused the fastest, followed by the anion with the lithium ion diffusing the slowest. The degree of ion dissociation was estimated for each electrolyte by comparing the ionic conductivities estimated from the ion diffusion and those measured directly by the electrochemical method

The gun control system of the IFUSP microtron

International Nuclear Information System (INIS)

Malafronte, A.A.; Takahashi, J.; Bonini, A.L.; Martins, M.N.

1997-01-01

A thermionic gun control system has been developed for the IFUSP microtron. The control system, which is composed of a dedicated microcomputer, A/D converter, grid pulser, filament and grid power supplies, is kept at a high voltage potential. The gun parameters are handled through a PC computer at ground potential via fiber-optic link. (orig.)

PcFKH1, a novel regulatory factor from the forkhead family, controls the biosynthesis of penicillin in Penicillium chrysogenum.

Science.gov (United States)

Domínguez-Santos, Rebeca; García-Estrada, Carlos; Kosalková, Katarina; Prieto, Carlos; Santamarta, Irene; Martín, Juan-Francisco

2015-08-01

Penicillin biosynthesis in Penicillium chrysogenum (re-identified as Penicillium rubens) is a good example of a biological process subjected to complex global regulatory networks and serves as a model to study fungal secondary metabolism. The winged-helix family of transcription factors recently described, which includes the forkhead type of proteins, is a key type of regulatory proteins involved in this process. In yeasts and humans, forkhead transcription factors are involved in different processes (cell cycle regulation, cell death control, pre-mRNA processing and morphogenesis); one member of this family of proteins has been identified in the P. chrysogenum genome (Pc18g00430). In this work, we have characterized this novel transcription factor (named PcFKH1) by generating knock-down mutants and overexpression strains. Results clearly indicate that PcFKH1 positively controls antibiotic biosynthesis through the specific interaction with the promoter region of the penDE gene, thus regulating penDE mRNA levels. PcFKH1 also binds to the pcbC promoter, but with low affinity. In addition, it also controls other ancillary genes of the penicillin biosynthetic process, such as phlA (encoding phenylacetyl CoA ligase) and ppt (encoding phosphopantetheinyl transferase). PcFKH1 also plays a role in conidiation and spore pigmentation, but it does not seem to be involved in hyphal morphology or cell division in the improved laboratory reference strain Wisconsin 54-1255. A genome-wide analysis of processes putatively coregulated by PcFKH1 and PcRFX1 (another winged-helix transcription factor) in P. chrysogenum provided evidence of the global effect of these transcription factors in P. chrysogenum metabolism. Copyright © 2015 Elsevier B.V. and Société Française de Biochimie et Biologie Moléculaire (SFBBM). All rights reserved.

USL/DBMS NASA/PC R and D project system design standards

Science.gov (United States)

Dominick, Wayne D. (Editor); Moreau, Dennis R.

1984-01-01

A set of system design standards intended to assure the completeness and quality of designs developed for PC research and development projects is established. The standards presented address the areas of problem definition, initial design plan, design specification, and re-evaluation.

CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION WITH CLIPSITS)

Science.gov (United States)

Riley, , .

1994-01-01

The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

System for electrochemical investigations based on a PC and the Lab VIEW package

Directory of Open Access Journals (Sweden)

Stević Zoran

2007-01-01

Full Text Available This paper describes an electrochemical research system based on the Lab VIEW computer software package. An overview of well known electrochemical methods, such as potential measurements, chronopotentiometry, chronoamperometry, cyclic voltammetry and EIS is given. Electrochemical impedance spectroscopy has been adapted for systems containing large capacitances. For signal generation and recording of the response of the investigated electrochemical cell, a measurement and control system was developed, based on a PC P4 computer. The rest of the hardware consists of a commercially available AD-DA converter and an external interface for analog signal processing. The interface is a result of the authors own research. The software platform for the desired measurement methods is Lab VIEW package, which is regarded as a high standard in the area of modern virtual instruments. The developed system was adjusted, tested and compared with other commercially available systems. One such system is in constant use at the Technical Faculty in Bor.

PC communication

International Nuclear Information System (INIS)

Oh, Jae Cheol

1992-03-01

This text book is comprised of five charters, which is about PC communication for beginners who need to learn manners and how to use Ketel and PC serve. So it introduces first, conception of PC and precautions on using PC communication, second, preparation for PC communication with Modem, its program, install, kinds of protocol and how to use protocol, third directions of emulator of PC communication and super session, fourth, instruction of Ketel with join and access, basic command of Ketel, list of Ketel's menu, Ketel editor, service guide, directions of News service, Stock and bond service business and economic figures, exchange rate and interest rate, tax culture and leisure, Ketel BBS service and posting. The last part has a instruction of PC-serve about join, basic command of PC-serve, service guide and practical guideline.

PC communication

Energy Technology Data Exchange (ETDEWEB)

Oh, Jae Cheol

1992-03-15

This text book is comprised of five charters, which is about PC communication for beginners who need to learn manners and how to use Ketel and PC serve. So it introduces first, conception of PC and precautions on using PC communication, second, preparation for PC communication with Modem, its program, install, kinds of protocol and how to use protocol, third directions of emulator of PC communication and super session, fourth, instruction of Ketel with join and access, basic command of Ketel, list of Ketel's menu, Ketel editor, service guide, directions of News service, Stock and bond service business and economic figures, exchange rate and interest rate, tax culture and leisure, Ketel BBS service and posting. The last part has a instruction of PC-serve about join, basic command of PC-serve, service guide and practical guideline.

CINCH-II project. Next step in the coordination of education in nuclear- and radiochemistry in Europe

International Nuclear Information System (INIS)

John, Jan; Cuba, Vaclav; Nemec, Mojmir

2013-01-01

Any of the potential options for the nuclear power – both the renaissance, if any, or the phase out – will require significant numbers of the respective specialists, amongst others the nuclear and/or radiochemists. In parallel, a significant demand exists for these specialists in non-energy fields, such as environmental protection, radiopharmacy, nuclear medicine, biology, authorities, etc. Since the numbers of staff in teaching and the number of univerzities with facilities licensed for the work with open sources of ionizing radiation has decreased on or sometimes even below the critical level, coordination and collaboration are required to maintain the necessary teaching and training capabilities. The CINCH-II project, aiming at the Coordination of education and training In Nuclear CHemistry in Europe, will be a direct continuation of the CINCH-I project which, among others, identified the EuroMaster in Nuclear Chemistry quality label recognized and guaranteed by the European Chemistry Thematic Network Association as an optimum common mutual recognition system in the field of education in Nuclear Chemistry in Europe, surveyed the status of Nuclear Chemistry in industry / the needs of the end-users, developed an efficient system of education/training compact modular courses, or developed and tested two electronic tools as a basis of a future efficient distance learning system. In the first part of this paper, the achievements of the CINCH-I project will be described. This description will cover both the status review and the development activities of this Collaboration. In the status review field, the results of a detailed survey of the universities and curricula in nuclear- and radiochemistry in Europe and Russia will be presented. Another survey mapped the nuclear- and radiochemistry in industry – specifically the training and education needs of the end users. In the development activities field, the main achievements of the CINCH-project will be presented

Radiochemistry Division annual progress report for 1982

International Nuclear Information System (INIS)

Bhargava, V.K.; Rao, V.K.

1984-01-01

The progress report of the Radiochemistry Division of the Bhabha Atomic Research Centre, Bombay, presents the research and development work carried out during 1982 in the form of individual summaries arranged under the headings: reactor fuel chemistry, heavy element chemistry, radioanalytical chemistry, and nuclear chemistry. Some of the highlights of the R and D activities are: (1) optimisation of the chemical parameters for the preparation of UO 2 microspheres by internal gelation method, (2) synergetic extraction studies of various actinides from aqueous solutions, (3) development of methods of determination of uranium, 241 Am and 239 Pu, (4) fission studies of 232 Th, 236 U, 252 Cf and 229 Th, (5) determination of half-life of 241 Pu by various methods. A list of publications of the members of the Division published during 1982 is also given. (M.G.B.)

Optimum Condition for Plutonium Electrodeposition Process in Radiochemistry and Environment Laboratory, Nuclear Malaysia

International Nuclear Information System (INIS)

Yii, Mei-Wo; Abdullah Siddiqi Ismail

2014-01-01

Determination of alpha emitting plutonium radionuclides such as Pu-238, Pu-239 and Pu-240 concentrations inside a sample require lots of radiochemistry purification process to separate them from other interfering alpha emitters. These pure isotopes are then been electrodeposited onto a stainless steel disc and quantified using alpha spectrometry counter. In Radiochemistry and Environment Laboratory (RAS), Nuclear Malaysia, the quantification is done by comparing these isotopes with the recovery of known amount plutonium tracer, Pu-242, that been added into the sample prior analysis. This study been conducted to find the optimum conditions for the electrolysis process used at RAS. Four variable parameters that may interfere the percentage recovery of tracer hence the current, cathode to anode distance, pH and electrolysis duration had been identify and studied. Study was carry out using Pu-242 standard solution and the deposition disc was counted using Zinc Sulphite (silver) counter. Studies outcome suggested that the optimum conditions to reduce plutonium ion happens at 1-1.1 ampere of current, 3-5 mm of electrodes distance, pH 2.2-2.5 and a minimal electrolysis duration of 2 hours. (author)

Performance of PC-based charged particle multi-channel spectrometer utilising particle identification

International Nuclear Information System (INIS)

Palla, G.; Sziklai, J.; Trajber, Cs.

1993-12-01

A collaterally expandable charged particle spectrometer based on PC control and particle identification is described. A typical system configuration consisting of two channels are used to test the system performance. (author) 7 refs.; 5 figs

Data communication between Panasonic PLC and PC using SerialPort control in C#.NET environment

Science.gov (United States)

Gao, Ting; Gan, Xiaochuan; Ma, Liqun

2015-02-01

With the gradual promotion of Microsoft.NET platform, C# as an object-oriented programming language based on the platform has been widely used. Therefore, more attention is concentrated on how to achieve the communication between Panasonic PLC and PC efficiently and fast in C#.NET environment. In this paper, a method of using SerialPort control which could be used for achieving communication between PLC and PC is introduced. Meanwhile, the reason of abnormal thread when displayed the receiving data in form is analyzed and the programming method to solve the problem of thread safety is designed. Achieving the communication of Panasonic PLC and PC in C#.NET environment can give full play to the advantages of the .NET framework. It is practical, easy communication, high reliability and can combine with other measurement and calibration procedures effectively and conveniently. Configuration software is expensive and can only communicate with PLC separately, but these shortcomings can be solved in C#.NET environment. A well-designed user interface realized real-time monitoring of PLC parameters and achieved management and control integration. The experiment show that this method of data transfer is accurate and the program' running is stable.

A Performance Evaluation of a Notebook PC under a High Dose-Rate Gamma Ray Irradiation Test

Directory of Open Access Journals (Sweden)

Jai Wan Cho

2014-01-01

Full Text Available We describe the performance of a notebook PC under a high dose-rate gamma ray irradiation test. A notebook PC, which is small and light weight, is generally used as the control unit of a robot system and loaded onto the robot body. Using TEPCO’s CAMS (containment atmospheric monitoring system data, the gamma ray dose rate before and after a hydrogen explosion in reactor units 1–3 of the Fukushima nuclear power plant was more than 150 Gy/h. To use a notebook PC as the control unit of a robot system entering a reactor building to mitigate the severe accident situation of a nuclear power plant, the performance of the notebook PC under such intense gamma-irradiation fields should be evaluated. Under a similar dose-rate (150 Gy/h gamma ray environment, the performances of different notebook PCs were evaluated. In addition, a simple method for a performance evaluation of a notebook PC under a high dose-rate gamma ray irradiation test is proposed. Three notebook PCs were tested to verify the method proposed in this paper.

The importance of radiochemistry and indicator methods for the chemistry of traces

International Nuclear Information System (INIS)

Benes, P.; Majer, V.

1980-01-01

Sensitivity is compared for common chemical methods with respect to nonradioactive materials and methods for determining trace amounts of radioactive substances. The concept of trace amounts is explained and some other notions and terms are discussed from the point of view of chemistry and radiochemistry. The problem of radiation effect is briefly assessed on a sample of material containing trace amounts of a radionuclide and the isotopic effect problem in hydrogen is treated. (M.S.)

User's and reference guide to the INEL RML/analytical radiochemistry sample tracking database version 1.00

International Nuclear Information System (INIS)

Femec, D.A.

1995-09-01

This report discusses the sample tracking database in use at the Idaho National Engineering Laboratory (INEL) by the Radiation Measurements Laboratory (RML) and Analytical Radiochemistry. The database was designed in-house to meet the specific needs of the RML and Analytical Radiochemistry. The report consists of two parts, a user's guide and a reference guide. The user's guide presents some of the fundamentals needed by anyone who will be using the database via its user interface. The reference guide describes the design of both the database and the user interface. Briefly mentioned in the reference guide are the code-generating tools, CREATE-SCHEMA and BUILD-SCREEN, written to automatically generate code for the database and its user interface. The appendices contain the input files used by the these tools to create code for the sample tracking database. The output files generated by these tools are also included in the appendices

Control system for BARC-TIFR Pelletron

International Nuclear Information System (INIS)

Singh, S.; Singh, P.; Gore, J.; Kulkarni, S.

2012-01-01

BARC-TIFR Pelletron is a 14 MV tandem accelerator in operation from more than 20 years. It was having a DOS based control system software which was running on a 486 PC and it was not possible to port it on new PCs. It was based on serial highway and Uport adapter based CAMAC crate controller which are now not available and all spares were used. Hence we have changed CAMAC controller with in house developed Ethernet based CAMAC controller and new software has been developed. New Control system software is based on LINUX operating system with graphical user interface developed using Trolltech's QT API, but can be easily ported on MS windows. (author)

IBM-PC based high voltage controller [Paper No.: L7

International Nuclear Information System (INIS)

Mondal, N.K.; Kalmani, S.D.

1993-01-01

A simple IBM-PC/XT based high voltage controller is designed for C.A.E.N. high voltage supply unit, which is being used for testing the prototype detector for future accelerator experiment. The high voltage output of the supply unit can be remotely programmed. The V-set Lemo connectors at the rear panel provides the remote control facility. Similarly V-mon and I-mon can be used for remotely monitoring the voltage set and the current drawn from the supply unit. The controller described here sets the high voltage through V-set and monitors the voltage set, through V-mon at a pre-determined time interval. The monitoring is a background job and is done as an interrupt service routine of IRQ3. A simple menu driven software package used is written in Q-Basic and MASM. (author). 1 fig

Perspectives on teaching nuclear and radiochemistry at the Pennsylvania State University

International Nuclear Information System (INIS)

Catchen, G.L.

1993-01-01

Some perspectives on teaching the subject of nuclear and radiochemistry are presented in the form of a historical narrative. In addition, a program is briefly reviewed, which was developed approximately in 1985, to enhance learning in a specific course on the subject. This program involved developing illustrations, course notes, and video tutorials evaluating their effectiveness. After having used these aids extensively, their efficacy is commented on. The role of a nuclear science course in a nuclear engineering curriculum is also briefly discussed. (author) 4 refs

Nuclear chemistry on the Czech Technical University in Prague after introduction of structured study and foundation of the Centre for Radiochemistry and Radiation Chemistry

International Nuclear Information System (INIS)

John, J.

2007-01-01

In this presentation the author (head of the Centre for Radiochemistry and Radiation Chemistry) give a short review of history of the Department of Nuclear Chemistry and of the Centre for Radiochemistry and Radiation Chemistry of the Czech Technical University in Prague. Education in structured study in specialisation of nuclear chemistry in bachelor level, master level, as well as post-graduate study in nuclear chemistry with academic degree PhD. are realised. Some scientific results are presented

PC based data system for infrared spectrophotometer PU-9512

International Nuclear Information System (INIS)

Ali, Mohd Yakub; Venkiteswaran, S.; Nagar, M.S.

2000-08-01

This report summarises the upgrading of an old Infra Red Spectrophotometer using a pc for control, data acquisition, storage and analysis. The hardware link is made through RS232C serial port. The control and data management is achieved through software. A brief account of the facilities provided and versatility of the analysis package which was developed in-house in a user friendly menu driven fashion is given here. This is supported by the analysis and inter comparison of infra red spectra of organic/inorganic reactants and products. It has specific application in synthesis and characterization of new extractants, solvents, actinide and lanthanide complexes and in the study of thermally and radiolytically degraded products. (author)

Materials accounting system for an IBM PC

International Nuclear Information System (INIS)

Bearse, R.C.; Thomas, R.J.; Henslee, S.P.; Jackson, B.G.; Tracy, D.B.; Pace, D.M.

1986-01-01

We have adapted the Los Alamos MASS accounting system for use on an IBM PC/AT at the Fuels Manufacturing Facility (FMF) at Argonne National Laboratory-West (ANL-WEST) in Idaho Falls, Idaho. Cost of hardware and proprietary software was less than $10,000 per station. The system consists of three stations between which accounting information is transferred using floppy disks accompanying special nuclear material shipments. The programs were implemented in dBASEIII and were compiled using the proprietary software CLIPPER. Modifications to the inventory can be posted in just a few minutes, and operator/computer interaction is nearly instantaneous. After the records are built by the user, it takes 4 to 5 seconds to post the results to the database files. A version of this system was specially adapted and is currently in use at the FMF facility at Argonne National Laboratory in Idaho Falls. Initial satisfaction is adequate and software and hardware problems are minimal

Organization of a joint operation of PC and CAMAC equipment using KK106 crate controller and MULTI interface

International Nuclear Information System (INIS)

Vagov, V.A.; Sirotin, A.P.; Tulaev, A.B.; Tumanov, A.V.

1989-01-01

Hardware and software which permit to provide a joint operation of IBM PC/XT/AT (or compatibles) with CAMAC equipment are described. Wide-spread in the JINR the 106 type interface is used as CAMAC Dataway controller and MULTI interface is used as PC-Bus adapter. MULTI additional on-board module Baby-106 that emulates cut-down UNIBUS for 106 type interface is designed. The means offered allow PC and CAMAC modules to operate jointly both via the program transfer channel and DMA channel. Maximum (hardware) performance is obtained in DMA case. 5 refs.; 1 fig

Concept report: Microprocessor control of electrical power system

Science.gov (United States)

Perry, E.

1977-01-01

An electrical power system which uses a microprocessor for systems control and monitoring is described. The microprocessor controlled system permits real time modification of system parameters for optimizing a system configuration, especially in the event of an anomaly. By reducing the components count, the assembling and testing of the unit is simplified, and reliability is increased. A resuable modular power conversion system capable of satisfying a large percentage of space applications requirements is examined along with the programmable power processor. The PC global controller which handles systems control and external communication is analyzed, and a software description is given. A systems application summary is also included.

Design and implementation of the wireless high voltage control system

International Nuclear Information System (INIS)

Srivastava, Saurabh; Misra, A.; Pandey, H.K.; Thakur, S.K.; Pandit, V.S.

2011-01-01

In this paper we will describe the implementation of the wireless link for controlling and monitoring the serial data between control PC and the interface card (general DAQ card), by replacing existing RS232 based remote control system for controlling and monitoring High Voltage Power Supply (120kV/50mA). The enhancement in the reliability is achieved by replacing old RS232 based control system with wireless system by isolating ground loop. (author)

Radiochemistry Division annual progress report: 1986

International Nuclear Information System (INIS)

Datta, T.

1988-01-01

Research and Development (R and D) activities of the Radiochemistry Division of Bhabha Atomic Research Centre, Bombay during 1986 are reported. Some of the highlights of these activities are solvent extraction studies on U(VI) and trivalent Am, Cm and Cf, low energy and medium energy fission of actinides, nuclear reactions on 197 Au, perturbed angular correlation studies on polymerisation of Hf(IV) and EPR studies on Am doped BaCO 3 , SrSO 4 and LiKSO 4 . Investigations on the complexation, hydrolysis and speciation of Am(III) in phosphate and carbonate media have been carried out with a view to understanding the behaviour of Am ions in natural and waste water systems. The angular momentum studies have shown that fission fragment angular momentum increases with increasing excitation energy and angular momentum of the fissioning due to coupling of various collective rotational degrees of freedom. Angular distribution studies have shown that asymmetric mode fragments have higher anisotropy compared to the symmetric mode fragments due to extended saddle point shape and hence larger effective moment of inertia. Studies on alpha induced nuclear reaction on 197 Au have provided evidence for non-equilibrium particle emission process as against the expected compound nucleus mechanism. EPR and TSL studies on actinide doped solids have shown stabilisation of radicals produced on irradiations as well as provided evidence for chemically induced dynamic nuclear polarization. At the end of the report, a list of publications of the staff members of the Division during the report is given. These publications include journal articles, conference paper and technical reports. (Orig.)

Application of strong phosphoric acid to radiochemistry

International Nuclear Information System (INIS)

Terada, Kikuo

1977-01-01

Not only inorganic and organic compounds but also natural substrances, such as accumulations in soil, are completely decomposed and distilled by heating with strong phosphoric acid for 30 to 50 minutes. As applications of strong phosphoric acid to radiochemistry, determination of uranium and boron by use of solubilization effect of this substance, titration of uranyl ion by use of sulfuric iron (II) contained in this substance, application to tracer experiment, and determination of radioactive ruthenium in environmental samples are reviewed. Strong phosphoric acid is also applied to activation analysis, for example, determination of N in pyrographite with iodate potassium-strong phosphoric acid method, separation of Os and Ru with sulfuric cerium (IV) - strong phosphoric acid method or potassium dechromate-strong phosphoric acid method, analysis of Se, As and Sb rocks and accumulations with ammonium bromide, sodium chloride and sodium bromide-strong phosphoric acid method. (Kanao, N.)

Activities of the Laboratory of Neutron Activation Analysis in the Radiochemistry Division - IPEN/CNEN/SP/Brazil

International Nuclear Information System (INIS)

Vasconcellos, M.B.A.

1988-01-01

Neutron activation analysis (NAA) is one of the relevant applications of nuclear research reactors. Due to the high neutron fluxes available in these reactors, an excellent sensitivity of analysis is attained for many elements. NAA is one of the most sensitive, precise and accurate analytical methods for trace element determination. NAA has been one of the main activities of the Radiochemistry Division of IPEN, since the befinning of the operation of the nuclear reactor IEA-R1. Most of the effort was devoted to research work, aimed to improvements in the method as well as to its applications to several kinds of matrixes (geological, biological, metallic, environmental, forensic). Besides, analytical services were also offered, to the CNEN, to industries, universities, mining companies and research institutes. In the present paper, a review is made of the research work being developed presently at the Radiochemistry Division of IPEN. A discussion is also made of the planned expansion of the analytical services offered. (author) [pt

Marie Sklodowska-Curie and her contributions to chemistry, radiochemistry and radiotherapy

International Nuclear Information System (INIS)

Waclawek, Witold; Waclawek, Maria

2011-01-01

In 2009, the prestigious American scientific magazine New Scientist carried out a worldwide poll on the most inspirational woman in science. Mme. Curie received nearly as many as twice the votes cast for the candidate in second place. Given the level of regard for this exceptional woman - the first person to be honored with two Nobel Prizes, initially in physics and later in chemistry, and the first woman to serve as Professor at the University of Paris - this article briefly describes her life and her contributions to chemistry, radiochemistry and radiotherapy. (orig.)

Metal Detector By Using PIC Microcontroller Interfacing With PC

OpenAIRE

Yin Min Theint; Myo Maung Maung; Hla Myo Tun

2015-01-01

Abstract This system proposes metal detector by using PIC microcontroller interfacing with PC. The system uses PIC microcontroller as the main controller whether the detected metal is ferrous metal or non-ferrous metal. Among various types of metal sensors and various types of metal detecting technologies concentric type induction coil sensor and VLF very low frequency metal detecting technology are used in this system. This system consists of two configurations Hardware configuration and Sof...

Universal control and measuring system for modern classic and amorphous magnetic materials single/on-line strip testers

Science.gov (United States)

Zemánek, Ivan; Havlíček, Václav

2006-09-01

A new universal control and measuring system for classic and amorphous soft magnetic materials single/on-line strip testing has been developed at the Czech Technical University in Prague. The measuring system allows to measure magnetization characteristic and specific power losses of different tested materials (strips) at AC magnetization of arbitrary magnetic flux density waveform at wide range of frequencies 20 Hz-20 kHz. The measuring system can be used for both single strip testing in laboratories and on-line strip testing during the production process. The measuring system is controlled by two-stage master-slave control system consisting of the external PC (master) completed by three special A/D measuring plug-in boards, and local executing control unit (slave) with one-chip microprocessor 8051, connected with PC by the RS232 serial line. The "user friendly" powerful control software implemented on the PC and the effective program code for the microprocessor give possibility for full automatic measurement with high measuring power and high measuring accuracy.

Culturing of PC12 Cells, Neuronal Cells, Astrocytes Cultures and Brain Slices in an Open Microfluidic System

DEFF Research Database (Denmark)

Al Atraktchi, Fatima Al-Zahraa; Bakmand, Tanya; Rømer Sørensen, Ane

The brain is the center of the nervous system, where serious neurodegenerative diseases such as Parkinson’s, Alzheimer’s and Huntington’s are products of functional loss in the neural cells (1). Typical techniques used to investigate these diseases lack precise control of the cellular surroundings......, in addition to isolating the neural tissue from nutrient delivery and to creating unwanted gradients (2). This means that typical techniques used to investigate neurodegenerative diseases cannot mimic in vivo conditions, as closely as desired. We have developed a novel microfluidic system for culturing PC12...... cells, neuronal cells, astrocytes cultures and brain slices. The microfluidic system provides efficient nutrient delivery, waste removal, access to oxygen, fine control over the neurochemical environment and access to modern microscopy. Additionally, the setup consists of an in vitro culturing...

IBM-PC-based reactor neutronics analysis package

International Nuclear Information System (INIS)

Nigg, D.W.; Wessol, D.E.; Grimesey, R.A.; Parsons, D.K.; Wheeler, F.J.; Yoon, W.Y.; Lake, J.A.

1985-01-01

Technical advances over the past few years have led to a situation where a wide range of complex scientific computations can now be done on properly configured microcomputers such as the IBM-PC (personal computer). For a number of reasons, including security, economy, and user convenience, the development of a comprehensive system of reactor neutronics codes suitable for operation on the IBM-PC has been undertaken at the Idaho National Engineering Laboratory (INEL). It is anticipated that a PC-based code system could also have wide applicability in the nuclear engineering education community since conversion of software generated by national laboratories and others to college and university mainframe hardware has historically been a time-consuming process that has sometimes met with only limited success. This paper discusses the philosophy behind the INEL reactor neutronics PC code system and describes those parts of the system that are currently complete, those that are now under development, and those that are still in the planning stage

Fuel element radiometry system for quality control

International Nuclear Information System (INIS)

Bhattacharya, Sadhana; Gaur, Swati; Sridhar, Padmini; Mukhopadhyay, P.K.; Vaidya, P.R.; Das, Sanjoy; Sinha, A.K.; Bhatt, Sameer

2010-01-01

An indigenous and fully automatic PC based radiometry system has been designed and developed. The system required a vibration free scanning with various automated sequential movements to scan the fuel pin of size 5.8 mm (OD) x 1055 mm (L) along its full length. A mechanical system with these requirements and precision controls has been designed. The system consists of a tightly coupled and collimated radiation source-detector unit and data acquisition and control system. It supports PLC based control electronics to control and monitor the movement of fuel element, nuclear data acquisition and analysis system and feedback system to the mechanical scanner to physically accept or reject the fuel pin based on the decision derived by the software algorithms. (author)

A PC-based expert system for nondestructive testing

International Nuclear Information System (INIS)

Shankar, R.; Williams, R.; Smith, C.; Selby, G.

1991-01-01

Rule-based decision logic which can emulate problem-solving expertise of humans is being explored for power plant nondestructive evaluation (NDE) applications. This paper describes an effort underway at the EPRI NDE Center to assist in the interpretation of NDE data acquired by automatic systems during ultrasonic weld examination of boiling-water reactors (BWRs). A personal computer (PC) -based expert system shell was used to encode rules and assemble knowledge to address the discrimination of intergranular stress corrosion cracking (IGSCC) from benign reflectors in the inspection of pipe-to-component welds. The rules attempt to factor in plant inspection history, ultrasonic examination data nd, if available, radiography testing data; a majority of them deal with specific ultrasonic signal temporal and spatial behavior during automatic scanning. The paper describes the efforts in the development of the expert system

A Bio-Electro-Fenton System Employing the Composite FePc/CNT/SS316 Cathode

Directory of Open Access Journals (Sweden)

Yi-Ta Wang

2017-02-01

Full Text Available Bio-electro-Fenton microbial fuel cells generate energy through the decomposition of organic matter by microorganisms. The generated electricity drives a Fenton reaction in a cathode chamber, which can be used for the decolorization of dye wastewater. Most of the previous works added expensive platinum catalyst to improve the electrical property of the system. In this research, aligned carbon nanotubes (CNTs were generated on the surface of SS316 stainless steel by chemical vapor deposition, and an iron phthalocyanine (FePc catalyst was added to fabricate a compound (FePc/CNT/SS316 that was applied to the cathode electrode of the fuel cell system. This was expected to improve the overall electricity generation efficiency and extent of decolorization of the system. The results showed that the maximum current density of the system with the modified electrode was 3206.30 mA/m2, and the maximum power was 726.55 mW/m2, which were increased by 937 and 2594 times, respectively, compared to the current and power densities of a system where only the SS316 stainless steel electrode was used. In addition, the decolorization of RB5 dye reached 84.6% within 12 h. Measurements of the electrical properties of bio-electro-Fenton microbial fuel cells and dye decolorization experiments with the FePc/CNT/SS316 electrode showed good results.

Distributed Control System Design for Portable PC Based CNC Machine

Directory of Open Access Journals (Sweden)

Roni Permana Saputra

2014-07-01

Full Text Available The demand on automated machining has been increased and emerges improvement research to achieve many goals such as portability, low cost manufacturability, interoperability, and simplicity in machine usage. These improvements are conducted without ignoring the performance analysis and usability evaluation. This research has designed a distributed control system in purpose to control a portable CNC machine. The design consists of main processing unit, secondary processing unit, motor control, and motor driver. A preliminary simulation has been conducted for performance analysis including linear accuracy and circular accuracy. The results achieved in the simulation provide linear accuracy up to 2 μm with total cost for the whole processing unit is up to 5 million IDR.

Software development based on high speed PC oscilloscope for automated pulsed magnetic field measurement system

International Nuclear Information System (INIS)

Sun Yuxiang; Shang Lei; Li Ji; Ge Lei

2011-01-01

It introduces a method of a software development which is based on high speed PC oscilloscope for pulsed magnetic field measurement system. The previous design has been improved by this design, high-speed virtual oscilloscope has been used in the field for the first time. In the design, the automatic data acquisition, data process, data analysis and storage have been realized. Automated point checking reduces the workload. The use of precise motion bench increases the positioning accuracy. The software gets the data from PC oscilloscope by calling DLLs and includes the function of oscilloscope, such as trigger, ranges, and sample rate setting etc. Spline Interpolation and Bandstop Filter are used to denoise the signals. The core of the software is the state machine which controls the motion of stepper motors and data acquisition and stores the data automatically. NI Vision Acquisition Software and Database Connectivity Toolkit make the video surveillance of laboratory and MySQL database connectivity available. The raw signal and processed signal have been compared in this paper. The waveform has been greatly improved by the signal processing. (authors)

The new secondary channel control system at TRIUMF

International Nuclear Information System (INIS)

Keitel, R.; Bishop, D.; Dale, D.; England, N.; Harrison, D.

1990-01-01

The control of the secondary channels at TRIUMF has been decentralized. Each channel is now controlled through a single CAMAC crate from an IBM PC in the experimental counting room. Intelligent motor controllers were developed to replace the ageing slit control system. Advanced features of the control software package TICS, such as computer optimization of channel parameters and high-voltage conditioning of the dc separators, are described. (orig.)

Plastic optical fiber serial communications link for distributed control system

Science.gov (United States)

Saxena, Piyush; Sharangpani, K. K.; Vora, H. S.; Nakhe, S. V.; Jain, R.; Shenoy, N. M.; Bhatnagar, R.; Shirke, N. D.

2001-09-01

One of the most common interface for communications specified is RS 232C standard. Though widely accepted, RS232 has limited transmission speed, range and networking capabilities. RS 422 standard overcomes limitations by using differential signal lines. In automation of the operation of gas discharge lasers, multiple processors are used for control of lasers, cooling system, vacuum system etc. High EMI generated by lasers interfere through galvanic transmission or by radiation over the length of cables, and hang up operation of processors or control PC. A serial communications link was designed eliminating copper transmission media, using plastic optical fiber cables and components, to connect local controllers with the master PC working on RS232 protocols. The paper discusses the design and implementation of a high ly reliable EMI harden serial communications link.

Final report on research and development work 1979 by the Institute for Radiochemistry

International Nuclear Information System (INIS)

1980-02-01

The report gives a brief survey of the state of the research, development, and service activities in the Institute for Radiochemistry in Karlsruhe Nuclear Research Centre. The work is to be classified in the main points analytics, nuclear chemistry, isotope service, and water chemistry, with the analytic and nuclear-chemical tasks being mainly project-related. A bibliography of the publications made by the staff of the institute during 1979 is annected. (RB) [de

Measurement system microdensitometer Joyce-Loebl and computer IBM-PC for quantitative evaluation of autoradiograms

International Nuclear Information System (INIS)

Chajecki, T.

1992-01-01

The description of measurement system microdensitometer Joyce-Loebl, computer IBM-PC interface are given in the report. This system gives the possibility to save and processing of autoradiograms quantity data. (author). 2 refs, 14 figs, 2 tabs

The spectra program library: A PC based system for gamma-ray spectra analysis and INAA data reduction

Science.gov (United States)

Baedecker, P.A.; Grossman, J.N.

1995-01-01

A PC based system has been developed for the analysis of gamma-ray spectra and for the complete reduction of data from INAA experiments, including software to average the results from mulitple lines and multiple countings and to produce a final report of analysis. Graphics algorithms may be called for the analysis of complex spectral features, to compare the data from alternate photopeaks and to evaluate detector performance during a given counting cycle. A database of results for control samples can be used to prepare quality control charts to evaluate long term precision and to search for systemic variations in data on reference samples as a function of time. The entire software library can be accessed through a user-friendly menu interface with internal help.

The Institute of Radiochemistry, University of Liege, (Sart-Tilman), Belgium

International Nuclear Information System (INIS)

Duyckaerts, G.

1977-01-01

The Institute of Radiochemistry, erected in the new Sart-Tilman campus of the University of Liege has been especially planned and equipped for research on actinide chemistry. The two-floor building is well adapted for work in glove-boxes and well ventilated hoods with highly radioactive α-emitters. For the last ten years, research has been carried out in the following directions: synthesis and structural analysis of actinide compounds, thermodynamic evaluations on actinide compounds by microcalorimetry, electrochemistry of actinides in fused salts, redox properties of actinides in fused salts by absorption spectrophotometry, solution chemistry of actinides by solvent extraction, ion exchange and electrochemistry. (T.G.)

Leo II PC

Data.gov (United States)

Kansas Data Access and Support Center — LEO II is a second-generation software system developed for use on the PC, which is designed to convert location references accurately between legal descriptions and...

Upgrade of a control system for the JAERI ERL-FEL

International Nuclear Information System (INIS)

Kikuzawa, Nobuhiro

2004-01-01

The accelerator control system used for the JAERI ERL-FEL is a PC-based distributed control system that has been in operation since 1992. Since an interface bus of the PCs is obsolete, interface boards for the PCs are difficult to obtain in recent years. Thus we have been developing the CAMAC controller with μITRON operating system to replace the old PCs connected with CAMAC. We will introduce a Java and CORBA environment in the new control system. The control system upgrade, including hardware upgrading and applications rewriting, is described in this paper. (author)

The Texas A&M Radioisotope Production and Radiochemistry Program

International Nuclear Information System (INIS)

Akabani, Gamal

2016-01-01

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostics and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn-62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using a) a subcritical aqueous target system and b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011 and, due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

The Texas A&M Radioisotope Production and Radiochemistry Program

Energy Technology Data Exchange (ETDEWEB)

Akabani, Gamal [Texas A & M Univ., College Station, TX (United States)

2016-08-31

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostic and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn- 62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using (a) a subcritical aqueous target system and (b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011; due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

The Texas A&M Radioisotope Production and Radiochemistry Program

International Nuclear Information System (INIS)

Akabani, Gamal

2016-01-01

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostic and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn- 62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using (a) a subcritical aqueous target system and (b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011; due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

The Texas A&M Radioisotope Production and Radiochemistry Program

Energy Technology Data Exchange (ETDEWEB)

Akabani, Gamal [Texas A & M Univ., College Station, TX (United States). Dept. of Nuclear Engineering. Dept. of Veterinary Integrative Biosciences

2016-10-28

The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostics and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoretical projects and two experimental target systems. These were for At-211 production and for Zn-62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using a) a subcritical aqueous target system and b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011 and, due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.

Development of control and data processing system for JAERI ERL-FEL

International Nuclear Information System (INIS)

Kikuzawa, Nobuhiro

2005-03-01

A personal computer (PC) based distributed control system has been developed for Free Electron Laser (FEL) at Japan Atomic Energy Research Institute (JAERI) and operated since 1992. The control system was implemented on Ethernet LAN of PCs, Nippon Electric Company (NEC Corp.) PC-9800 series 32 bit personal computers. It became troublesome to maintain the control system, because many application programs did not work on outdated hardware interfaces and operating system. Furthermore, since security updates of the operating system (OS) were no longer provided, the problem was in network security when many PCs were connected with the LAN. We have to solve these problems and to improve the reliability and the safety of the control system, an ITRON-based controller was developed. In Japan, the ITRON is very popular and embedded in many products such as industrial instruments or household appliances that are demanded of its high reliability. When the local controller was installed, a new control program was developed by Java language which had high compatibility on many platforms so that replacement of the computer for consoles might become easy in future. High reliability and interchangeability have been successfully realized by them, and the control system made long continuous operation possible. (author)

Condensate and feedwater systems, pumps, and water chemistry. Volume seven

International Nuclear Information System (INIS)

Anon.

1986-01-01

Subject matter includes condensate and feedwater systems (general features of condensate and feedwater systems, condenser hotwell level control, condensate flow, feedwater flow), pumps (principles of fluid flow, types of pumps, centrifugal pumps, positive displacement pumps, jet pumps, pump operating characteristics) and water chemistry (water chemistry fundamentals, corrosion, scaling, radiochemistry, water chemistry control processes, water pretreatment, PWR water chemistry, BWR water chemistry, condenser circulating water chemistry

The evolution of industrial power monitoring and control systems

Energy Technology Data Exchange (ETDEWEB)

Nicholson, K. E.

1998-04-01

The evolution of power monitoring and control systems in industrial situations are described. Computer-based PMC (power monitoring and control) systems are discussed in two sections. Section 1 covers the PC/DOS based systems in use up to the 1990s. These systems had multitasking capability, sufficient for scanning a serial line running a multi-drop protocol to field instruments, which in turn were running either proprietary or PLC subsets, maintaining a level of operator display, data logging and query support. Since the mid-1990s the second generation of industrial power monitoring and control systems based on the PC/NT system came into use, driven to market by three factors: (1) availability of low cost PCs, (2) widespread availability of computer networking technologies, and (3) the appearance of the robust, industrially viable NT operating system. Second generation systems are characterized by division into two tiers; a monitoring system focused on remote metering, and a second tier of a modular system capable of fully implementing both power monitoring and supervisory control. Looking toward the future, the requirements for systems is expected to become more unique, driven by the need for information for energy procurement decision making, automatic control for integrating power acquisition from multiple suppliers, power capacity and integrated power and production control planning needs, and power quality and reliability issues. A review of the functionality of PMC systems, and system architectures was also provided. Results of a survey of PMC systems applications were also discussed. 2 refs., 4 tabs., 8 figs.

The 1986-1989 activity report of the Radiochemistry Group of the Orsay IPN

International Nuclear Information System (INIS)

Guillaumont, R.

1989-01-01

The 1986-1989 activity report of the Radiochemistry Group of the Nuclear Physics Institute (at Orsay), is presented. The research fields purposes and evolution are summarized. The following topics are presented: synthesis and study of pure or doped thorium compounds, high resolution spectroscopy, thermodynamics/kinetics in aqueous solutions, 6d elements, investigations on Ta, Kd, U, UO2 and cold fusion. The presentation of the research team, administrative aspects, publications, conferences and future research programs are also included [fr

Autonomous acquisition systems for TJ-II: controlling instrumentation with a fourth generation language

International Nuclear Information System (INIS)

Sanchez, E.; Portas, A.B.; Vega, J.; Agudo, J.M.; McCarthy, K.J.; Ruiz, M.; Barrera, E.; Lopez, S.

2004-01-01

Recently, 536 new acquisition channels, made-up of three different channel types, have been incorporated into the TJ-II data acquisition system (DAQ). Dedicated software has also been developed to permit experimentalists to program and control the data acquisition in these systems. The software has been developed using LabView and runs under the Windows 2000 operating system in both personal computer (PC) and PXI controllers. In addition, LabView software has been developed to control TJ-II VXI channels from a PC using a MXI connection. This new software environment will also aid future integration of acquisition channels into the TJ-II remote participation system. All of these acquisition devices work autonomously and are connected to the TJ-II central server via a local area network. In addition, they can be remotely controlled from the TJ-II control-room using Virtual Network Computing (VNC) software

A versatile local control system for the LEIR/AD electron cooler

CERN Document Server

MacCaferri, R

1999-01-01

With the end of antiproton physics at LEAR in 1996, the electron cooling device was modified in order that it could be used for experiments with lead ions in 1997 in LEIR and then for installation in the AD machine the following year. As a consequence, as well as the mechanical modifications to the cooler, the control system also needed to be upgraded and it was decided to build a system that could run either from a PC or from a Workstation as used in the accelerator control rooms. This turned out to be the most efficient solution as no support was given for the maintenance of the old control system during the experiments with lead ions. The PC system was realised during the shutdown before the machine experiments started, leaving time during the rest of 1997 to build the VME interface for installation in the AD. In this paper the hardware and software implementations of this new control system are described and some ideas for the near future are also presented.

The design and implementation of a PC based multi-channel scaler system

International Nuclear Information System (INIS)

Wang Qiang; Chinese Academy of Sciences, Beijing; Jin Dapeng; Liu Zhen'an; Zhao Dixin

2007-01-01

A multi-channel scaler system is designed for the system check and status monitoring of the BESIII trigger system. It is composed of a PC, two PCI interface multi-channel scaler cards, the corresponding drivers and user programs. Total 64 signals can be scaled and monitored in real time. The scaled data are recorded locally and some of them are distributed to the online system. In this paper, the hardware structure, software development and long time running stability of the system are introduced. (authors)

The inverse electron demand Diels-Alder click reaction in radiochemistry.

Science.gov (United States)

Reiner, Thomas; Zeglis, Brian M

2014-04-01

The inverse electron-demand Diels-Alder (IEDDA) cycloaddition between 1,2,4,5-tetrazines and strained alkene dienophiles is an emergent variety of catalyst-free 'click' chemistry that has the potential to have a transformational impact on the synthesis and development of radiopharmaceuticals. The ligation is selective, rapid, high-yielding, clean, and bioorthogonal and, since its advent in 2008, has been employed in a wide variety of chemical settings. In radiochemistry, the reaction has proven particularly useful with (18)  F and has already been utilized to create a number of (18)  F-labeled agents, including the PARP1-targeting small molecule (18)  F-AZD2281, the αv β3 integrin-targeting peptide (18)  F-RGD, and the GLP-1-targeting peptide (18)  F-exendin. The inherent flexibility of the ligation has also been applied to the construction of radiometal-based probes, specifically the development of a modular strategy for the synthesis of radioimmunoconjugates that effectively eliminates variability in the construction of these agents. Further, the exceptional speed and biorthogonality of the reaction have made it especially promising in the realm of in vivo pretargeted imaging and therapy, and pretargeted imaging strategies based on the isotopes (111) In, (18)  F, and (64) Cu have already proven capable of producing images with high tumor contrast and low levels of uptake in background, nontarget organs. Ultimately, the characteristics of inverse electron-demand Diels-Alder click chemistry make it almost uniquely well-suited for radiochemistry, and although the field is young, this ligation has the potential to make a tremendous impact on the synthesis, development, and study of novel radiopharmaceuticals. Copyright © 2013 John Wiley & Sons, Ltd.

Flow injection analysis: Emerging tool for laboratory automation in radiochemistry

International Nuclear Information System (INIS)

Egorov, O.; Ruzicka, J.; Grate, J.W.; Janata, J.

1996-01-01

Automation of routine and serial assays is a common practice of modern analytical laboratory, while it is virtually nonexistent in the field of radiochemistry. Flow injection analysis (FIA) is a general solution handling methodology that has been extensively used for automation of routine assays in many areas of analytical chemistry. Reproducible automated solution handling and on-line separation capabilities are among several distinctive features that make FI a very promising, yet under utilized tool for automation in analytical radiochemistry. The potential of the technique is demonstrated through the development of an automated 90 Sr analyzer and its application in the analysis of tank waste samples from the Hanford site. Sequential injection (SI), the latest generation of FIA, is used to rapidly separate 90 Sr from interfering radionuclides and deliver separated Sr zone to a flow-through liquid scintillation detector. The separation is performed on a mini column containing Sr-specific sorbent extraction material, which selectively retains Sr under acidic conditions. The 90 Sr is eluted with water, mixed with scintillation cocktail, and sent through the flow cell of a flow through counter, where 90 Sr radioactivity is detected as a transient signal. Both peak area and peak height can be used for quantification of sample radioactivity. Alternatively, stopped flow detection can be performed to improve detection precision for low activity samples. The authors current research activities are focused on expansion of radiochemical applications of FIA methodology, with an ultimate goal of creating a set of automated methods that will cover the basic needs of radiochemical analysis at the Hanford site. The results of preliminary experiments indicate that FIA is a highly suitable technique for the automation of chemically more challenging separations, such as separation of actinide elements

Beam extraction control systems of the fast-cycling synchrotron

International Nuclear Information System (INIS)

Toumanian, A.; Zapolski, N.; Nickogosian, V.; Ananian, A.; Kazarian, A.; Khoetsian, M.; Agababian, A.; Matevosian, A.

1992-01-01

A compact system controlling the extraction of different beams (gamma, electron, synchrotron radiation) in single and simultaneous operation modes at high electromagnetic disturbances level based on using one computer of IBM PC/AT type is described. (author)

Developing a PC-based expert system for fault analysis of reactor instruments

International Nuclear Information System (INIS)

Diwakar, M.P.; Rathod, N.C.; Bairi, B.R.; Darbhe, M.D.; Joglekar, S.S.

1989-01-01

This paper describes the development of an expert system for fault analysis of electronic instruments in the CIRUS nuclear reactor. The system was developed in Prolog on an IBM PC-XT compatible computer. A 'model-based' approach (Button et al, 1986) was adopted combining 'frames' and 'rules' to provide flexible control over the inferencing mechanisms. Frames represent the domain-objects as well as the inter-object relationships. They include 'demons' or 'active values' for triggering actions. Rules, along with frames, are used for fault analysis. The rules can be activated either in a data-driven or a goal-driven manner. The use of frames makes rule management easier. It is felt that developing in-house shell proved advantageous, compared to using commercially available shells. Choosing the model-based approach was efficient compared to a production system architecture. Therefore, the use of hybrid representations for diagnostic applications is advocated. Based on the experience, some general recommendations for developing such systems are presented. The expert system helps novice operators to understand the process of diagnosis and achieve a significant required level of competence. The system may not achieve the required level of proficiency by itself, but it can be used to train operators to become experts. (author). 12 refs

Research in the fields of radiochemistry and activation analysis using the LENA TRIGA nuclear plant

International Nuclear Information System (INIS)

Maxia, V.; Meloni, S.; Stella, R.; Brandone, A.

1972-01-01

In the past two years most of the research effort at the Radiochemistry Laboratory and National Research Council Centre for Radiochemistry and Activation Analysis has been devoted to research and development of activation analysis using the TRIGA Mark II LENA reactor of the University of Pavia. Pile neutrons have been used both in steady state and pulse mode, in the determination of oxygen in non ferrous materials. Neutron activation has been applied to the determination of some atmospheric particulate pollutants. Another field, in which activation analysis has been applied, is forensic research. Methods have been developed for the determination of antimony, barium and copper in gunpowder residues. By using inorganic materials such as molybdenum dibromide, zinc ferrocyanide and cadmium metal in granular form it was possible to set up simple chemical procedures in the activation analysis of trace amounts of noble metals in metallic matrices (high purity nickel and copper), geochemical materials (rocks and meteorites) and biological materials (orchard leaves). Neutron activation analysis was also used to investigate on the extraction of the platinum group metals from iodide and thiocyanate solutions at low concentrations

Radiochemistry Division annual progress report: 1993

International Nuclear Information System (INIS)

Natarajan, V.; Godbole, S.V.; Iyer, R.H.

1995-01-01

The research and development activities of the Radiochemistry Division of BARC during the year 1993 are briefly described under the headings: (i) nuclear chemistry; (ii) actinide chemistry; (iii) spectroscopy and (iv) instrumentation. Nuclear chemistry work deals with areas of nuclear reactions, nuclear fission, nuclear spectroscopy, nuclear data measurements and synthesis of transplutonium isotopes. The research programme in actinide chemistry deals mainly with the complexation of actinides, lanthanides and fission products from aqueous media with organic reagents such as amides, diamides, CMPO, crown ethers and macrocyclic ligands. Spectroscopic studies include electron paramagnetic resonance and optical investigations to probe phase transitions in actinide and other compounds, investigation of role of radiation induced radical ions in the thermoluminescence of actinide doped phosphors, photoacoustic spectra of uranium compounds and development of analytical methods for the determination of silver and rare earths from uranium and thorium oxide matrices. The instrumentation group has developed electronic circuitry and software support for installing a pilot plant for the preparation of dry gel microspheres of UO 2 and (U, Pu)O 2 . A list of publications by the scientific staff of the Division is also included. (author). refs., 38 figs., 26 tabs

Annual Report 2010. Institute of Radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Bernhard, G. (ed.)

2011-10-26

The Institute of Radiochemistry is one of the six research institutes of the Helmholtz center Dresden-Rossendorf. The report covers contributions in two parts. Part 1; long-lived radionuclides in biosystems: Several contributions concern the determination of formation and structures of various uranium, americium, and curium complexes with relevant organic and inorganic ligands. First results about the dependency of uranium(VI) complexation with small organic ligands at elevated temperatures were achieved. New insights in the mechanisms of luminescence quenching of uranyl complexes by density functional theory calculations are reported. Bacteria, algae, and fungi can influence the mobilization or immobilization of heavy metals in water and soils. Part II: long-lived radionuclides at permanent disposal sites. Several contributions report research on the behavior of biofilms in uranium contaminated sites. To describe the aqueous transport of actinides and other long-lived radionuclides the dominating processes on the liquid/solid interfaces must be considered. Interesting results about the sorption and surface complexation of different metals (long-lived radionuclides) during interaction with various mineral surfaces, and colloids were achieved. Substantial progress was made on knowledge about the visualization and quantification of fluid flow in salt rock formations by using positron emission tomography.

A Pc-interface module has been developed that provides an easy way to interface PC

International Nuclear Information System (INIS)

Rifai, Ahmad; Gunawan, Usep Setia

2003-01-01

A pc-interface module has been developed that provides an easy way to interface PC with I/O devices. This MSC51 micro controller based module accepts series of commands from a personal computer through a serial port. The commands are defined to easily control 24 I/O lines available on the module. These lines can be individually used as either input or output that make the module very verstile. A command is received by the module on ASCII string basis. Each character sent to the module will give an interrupt. The firmware's interrupt handler will store the character in a buffer until end of command character arrives. The firmware then parses and interpreters the command and responses accordingly

Photovoltaic Cells Mppt Algorithm and Design of Controller Monitoring System

Science.gov (United States)

Meng, X. Z.; Feng, H. B.

2017-10-01

This paper combined the advantages of each maximum power point tracking (MPPT) algorithm, put forward a kind of algorithm with higher speed and higher precision, based on this algorithm designed a maximum power point tracking controller with ARM. The controller, communication technology and PC software formed a control system. Results of the simulation and experiment showed that the process of maximum power tracking was effective, and the system was stable.

76 FR 5467 - Airworthiness Directives; Pilatus Aircraft Ltd. Models PC-6, PC-6-H1, PC-6-H2, PC-6/350, PC-6/350...

Science.gov (United States)

2011-02-01

...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0..., Fairchild Heli Porter PC-6 airplanes, or Fairchild-Hiller Corporation PC-6 airplanes. Discussion Section... [[Page 5469

Upgrading of analogue gamma cameras with PC based computer system

International Nuclear Information System (INIS)

Fidler, V.; Prepadnik, M.

2002-01-01

Full text: Dedicated nuclear medicine computers for acquisition and processing of images from analogue gamma cameras in developing countries are in many cases faulty and technologically obsolete. The aim of the upgrading project of International Atomic Energy Agency (IAEA) was to support the development of the PC based computer system which would cost 5.000 $ in total. Several research institutions from different countries (China, Cuba, India and Slovenia) were financially supported in this development. The basic demands for the system were: one acquisition card an ISA bus, image resolution up to 256x256, SVGA graphics, low count loss at high count rates, standard acquisition and clinical protocols incorporated in PIP (Portable Image Processing), on-line energy and uniformity correction, graphic printing and networking. The most functionally stable acquisition system tested on several international workshops and university clinics was the Slovenian one with a complete set of acquisition and clinical protocols, transfer of scintigraphic data from acquisition card to PC through PORT, count loss less than 1 % at count rate of 120 kc/s, improvement of integral uniformity index by a factor of 3-5 times, reporting, networking and archiving solutions for simple MS network or server oriented network systems (NT server, etc). More than 300 gamma cameras in 52 countries were digitized and put in the routine work. The project of upgrading the analogue gamma cameras yielded a high promotion of nuclear medicine in the developing countries by replacing the old computer systems, improving the technological knowledge of end users on workshops and training courses and lowering the maintenance cost of the departments. (author)

The automated radiosynthesis and purification of the opioid receptor antagonist, [6-O-methyl-11C]diprenorphine on the GE TRACERlab FXFE radiochemistry module.

Science.gov (United States)

Fairclough, Michael; Prenant, Christian; Brown, Gavin; McMahon, Adam; Lowe, Jonathan; Jones, Anthony

2014-05-15

[6-O-Methyl-(11)C]diprenorphine ([(11)C]diprenorphine) is a positron emission tomography ligand used to probe the endogenous opioid system in vivo. Diprenorphine acts as an antagonist at all of the opioid receptor subtypes, that is, μ (mu), κ (kappa) and δ (delta). The radiosynthesis of [(11)C]diprenorphine using [(11)C]methyl iodide produced via the 'wet' method on a home-built automated radiosynthesis set-up has been described previously. Here, we describe a modified synthetic method to [(11)C]diprenorphine performed using [(11)C]methyl iodide produced via the gas phase method on a GE TRACERlab FXFE radiochemistry module. Also described is the use of [(11)C]methyl triflate as the carbon-11 methylating agent for the [(11)C]diprenorphine syntheses. [(11)C]Diprenorphine was produced to good manufacturing practice standards for use in a clinical setting. In comparison to previously reported [(11)C]diprenorphine radiosyntheisis, the method described herein gives a higher specific activity product which is advantageous for receptor occupancy studies. The radiochemical purity of [(11)C]diprenorphine is similar to what has been reported previously, although the radiochemical yield produced in the method described herein is reduced, an issue that is inherent in the gas phase radiosynthesis of [(11)C]methyl iodide. The yields of [(11)C]diprenorphine are nonetheless sufficient for clinical research applications. Other advantages of the method described herein are an improvement to both reproducibility and reliability of the production as well as simplification of the purification and formulation steps. We suggest that our automated radiochemistry route to [(11)C]diprenorphine should be the method of choice for routine [(11)C]diprenorphine productions for positron emission tomography studies, and the production process could easily be transferred to other radiochemistry modules such as the TRACERlab FX C pro. Copyright © 2014 John Wiley & Sons, Ltd.

Flexible missile autopilot design studies with PC-MATLAB/386

Science.gov (United States)

Ruth, Michael J.

1989-01-01

Development of a responsive, high-bandwidth missile autopilot for airframes which have structural modes of unusually low frequency presents a challenging design task. Such systems are viable candidates for modern, state-space control design methods. The PC-MATLAB interactive software package provides an environment well-suited to the development of candidate linear control laws for flexible missile autopilots. The strengths of MATLAB include: (1) exceptionally high speed (MATLAB's version for 80386-based PC's offers benchmarks approaching minicomputer and mainframe performance); (2) ability to handle large design models of several hundred degrees of freedom, if necessary; and (3) broad extensibility through user-defined functions. To characterize MATLAB capabilities, a simplified design example is presented. This involves interactive definition of an observer-based state-space compensator for a flexible missile autopilot design task. MATLAB capabilities and limitations, in the context of this design task, are then summarized.

Building the perfect PC

CERN Document Server

Thompson, Robert Bruce

2006-01-01

This popular Build-It-Yourself (BIY) PC book covers everything you want to know about building your own system: Planning and picking out the right components, step-by-step instructions for assembling your perfect PC, and an insightful discussion of why you'd want to do it in the first place. Most big brand computers from HP, Dell and others use lower-quality components so they can meet their aggressive pricing targets. But component manufacturers also make high-quality parts that you can either purchase directly, or obtain through distributors and resellers. Consumers and corporations

PC-based car license plate reader

Science.gov (United States)

Hwang, Chung-Mu; Shu, Shyh-Yeong; Chen, Wen-Yu; Chen, Yie-Wern; Wen, Kuang-Pu

1992-11-01

A car license plate reader (CLPR) using fuzzy inference and neural network algorithm has been developed in Industrial Technology Research Institute (ITRI) and installed in highway toll stations to identify stolen cars. It takes an average of 0.7 seconds to recognize a car license plate by using a PC with 80486-50 CPU. The recognition rate of the system is about 97%. The techniques of CLPR include vehicle sensing, image grab control, optic pre- processing, lighting, and optic character recognition (OCR). The CLPR can be used in vehicle flow statistics, the checking of stolen vehicles, automatic charging systems in parking lots or garage management, and so on.

Test and Control System for Chlorophyll Fluorescence Parameters Using LED as Excitation Source

Directory of Open Access Journals (Sweden)

Zou Qiuying

2014-05-01

Full Text Available A new scheme on test and control system for chlorophyll fluorescence is presented in this work, which uses light-emitting diode (LED excitation by means of measuring the fluorescence parameter fpsII. The system takes programmable power supply as LEDs illumination drive power with high sensitivity and signal-to-noise ratio. MINIPAM is used to measure fluorescence parameter fpsII and keeps communication with upper PC by serial port. The upper PC can control the power supply and process the data received from MINIPAM by software which is programmed in VB6. The results show that the system has a lot of advantages such as high accuracy and convenience. The effect of environmental factors on fluorescence parameters is analyzed comprehensively. It will be a practical measurement and control system for photosynthetic ability and have wide application foreground.

Investigasi Serangan Malware Njrat Pada PC

Directory of Open Access Journals (Sweden)

Devi Rizky Septiani

2016-12-01

Full Text Available Malware merupakan salah satu bentuk dari kejahatan komputer yang terjadi pada sebuah sistem jaringan komputer, malware Njrat termasuk jenis Trojan horse. Trojan adalah salah satu jenis malware yang ikut berkembang di dalamnya, yang memungkinkan attacker masuk ke dalam sistem tanpa diketahui oleh pemilik. Penggunaan trojan saat ini lebih ke arah kejahatan dunia maya (cyber crime, salah satu dari malware yang sangat berbahaya karena besarnya dampak kerugian yang ditimbulkan, mulai dari pencurian data penting sampai mengubah hak akses pada PC korban. Sasaran terbanyak penybaran trojan adalah pengguna sistem operasi windows. Penyebaran trojan ini dilakukan dengan metode social engineering, yaitu teknik yang menggunakan kelemahan manusia, sehingga user tanpa curiga langsung mengeksekusi sebuah program yang tidak dikenal.  Aktivitas malware berkaitan erat dengan  performa PC dan juga aktifitas network pada system computer. Penelitian ini bertujuan untuk mengetahui cara kerja malware Njrat dan melakukan investigasi terhadap performa pada system computer. Metodologi yang digunakan dynamic analysis dengan melakukan analisa malware pada suatu sistem dan melihat aktivitas atau proses yang diaktifkan oleh malware tersebut. Dampak perubahan yang terjadi pada PC Target terlihat pada performa masing-masing PC yang telah disisipkan malware. Kata kunci            Malware, Njrat, System computer

Construction of binary status information system using PC network

International Nuclear Information System (INIS)

Kurnianto, K.; Azriani, A.; Teddy, S.

1998-01-01

Binary status information system is a part of establishing reactor parameter with Pc that function as MPR-30 Process Computer. Binary Alarm system, consist of interface hardware and input binary module terminal, prepare the information that be displayed in text message and graphical form. Monitor software give facilities that binary status of RSG-GAS components can be monitored using computer network (LAN). This program consist of two part : reside in server computer and reside in user computer. Program in server acquire data from interface and than store it in data base (Access file). Than, user computer read this file and display it in Dynamic Process and Instrumentation Diagram. The number of user computer can be more then one because data base was designed for multi-user operation

The Solar Neighborhood. 35. Distances to 1404 M Dwarf Systems Within 25 PC in the Southern Sky

Science.gov (United States)

2015-01-01

reference, and 2MASS JHKs magnitudes. The table is divided into the 1404 systems within 25 pc (top) and the 344 systems beyond 25 pc (bottom). A number in... 2MASS JHKs magnitudes, as discussed in Section 4.1. The plate R59F magnitude is the second, more recent R epoch measurement of the two available in...the SuperCOSMOS Sky Survey. The term ccddist is used to indicate a distance estimate that combines CCD VRI and 2MASS JHKs magnitudes, as discussed in

Using the AUDIT-PC to predict alcohol withdrawal in hospitalized patients.

Science.gov (United States)

Pecoraro, Anna; Ewen, Edward; Horton, Terry; Mooney, Ruth; Kolm, Paul; McGraw, Patty; Woody, George

2014-01-01

Alcohol withdrawal syndrome (AWS) occurs when alcohol-dependent individuals abruptly reduce or stop drinking. Hospitalized alcohol-dependent patients are at risk. Hospitals need a validated screening tool to assess withdrawal risk, but no validated tools are currently available. To examine the admission Alcohol Use Disorders Identification Test-(Piccinelli) Consumption (AUDIT-PC) ability to predict the subsequent development of AWS among hospitalized medical-surgical patients admitted to a non-intensive care setting. Retrospective case–control study of patients discharged from the hospital with a diagnosis of AWS. All patients with AWS were classified as presenting with AWS or developing AWS later during admission. Patients admitted to an intensive care setting and those missing AUDIT-PC scores were excluded from analysis. A hierarchical (by hospital unit) logistic regression was performed and receiver-operating characteristics were examined on those developing AWS after admission and randomly selected controls. Because those diagnosing AWS were not blinded to the AUDIT-PC scores, a sensitivity analysis was performed. The study cohort included all patients age ≥18 years admitted to any medical or surgical units in a single health care system from 6 October 2009 to 7 October 2010. After exclusions, 414 patients were identified with AWS. The 223 (53.9 %) who developed AWS after admission were compared to 466 randomly selected controls without AWS. An AUDIT-PC score ≥4 at admission provides 91.0 % sensitivity and 89.7 % specificity (AUC=0.95; 95 % CI, 0.94–0.97) for AWS, and maximizes the correct classification while resulting in 17 false positives for every true positive identified. Performance remained excellent on sensitivity analysis (AUC=0.92; 95 % CI, 0.90–0.93). Increasing AUDIT-PC scores were associated with an increased risk of AWS (OR=1.68, 95 % CI 1.55–1.82, pAUDIT-PC score is an excellent discriminator of AWS and could be an important component

Pc-based car license plate reading

Science.gov (United States)

Tanabe, Katsuyoshi; Marubayashi, Eisaku; Kawashima, Harumi; Nakanishi, Tadashi; Shio, Akio

1994-03-01

A PC-based car license plate recognition system has been developed. The system recognizes Chinese characters and Japanese phonetic hiragana characters as well as six digits on Japanese license plates. The system consists of a CCD camera, vehicle sensors, a strobe unit, a monitoring center, and an i486-based PC. The PC includes in its extension slots: a vehicle detector board, a strobe emitter board, and an image grabber board. When a passing vehicle is detected by the vehicle sensors, the strobe emits a pulse of light. The light pulse is synchronized with the time the vehicle image is frozen on an image grabber board. The recognition process is composed of three steps: image thresholding, character region extraction, and matching-based character recognition. The recognition software can handle obscured characters. Experimental results for hundreds of outdoor images showed high recognition performance within relatively short performance times. The results confirmed that the system is applicable to a wide variety of applications such as automatic vehicle identification and travel time measurement.

A PC-based discrete event simulation model of the civilian radioactive waste management system

International Nuclear Information System (INIS)

Airth, G.L.; Joy, D.S.; Nehls, J.W.

1992-01-01

This paper discusses a System Simulation Model which has been developed for the Department of Energy to simulate the movement of individual waste packages (spent fuel assemblies and fuel containers) through the Civilian Radioactive Waste Management System (CRWMS). A discrete event simulation language, GPSS/PC, which runs on an IBM/PC and operates under DOS 5.0, mathematically represents the movement and processing of radioactive waste packages through the CRWMS and the interaction of these packages with the equipment in the various facilities. The major features of the System Simulation Model are: the ability to reference characteristics of the different types of radioactive waste (age, burnup, etc.) in order to make operational and/or system design decisions, the ability to place stochastic variations on operational parameters such as processing time and equipment outages, and the ability to include a rigorous simulation of the transportation system. Output from the model includes the numbers, types, and characteristics of waste packages at selected points in the CRWMS and the extent to which various resources will be utilized in order to transport, process, and emplace the waste

Development of PC based data acquisition system for universal test machine

International Nuclear Information System (INIS)

Nageswara Rao, T.S.V.R.; Hari Prasad, V.; Satyadev, B.; Banarjee, P.K.

2010-01-01

To determine the tensile properties of nuclear fuel tubes and other components, the Universal Test Machine is being used in Material testing section of Quality Assurance, NFC. This machine consists of Chart Recorder to chart the Load Vs. Strain graph. The tensile properties of the test material viz. Ultimate Tensile Strength (UTS), Yield Strength (YS), and Young's Modulus (e) etc. are usually determined by graphical method using a ruler. To overcome the problems faced due to embargo and non-availability of spares of recorder, a PC based Data Acquisition System (DAS) with necessary software algorithm was developed for automatic calculation of tensile properties by extracting the linear portion of tensile test curve where the Tangent and Secant Modulus coincide, without intervention of the user. This developmental work reduces human error in calculation, facilitates the use of state-of-the art technology and the risk of obsolescence by employing PC based architecture. (author)

Low-cost general purpose spectral display unit using an IBM PC

International Nuclear Information System (INIS)

Robinson, S.L.

1985-10-01

Many physics experiments require acquisition and analysis of spectral data. commercial minicomputer-based multichannel analyzers collect detected counts at various energies, create a histogram of the counts in memory, and display the resultant spectra. They acquire data and provide the user-to-display interface. The system discussed separates functions into the three modular components of data acquisition, storage, and display. This decoupling of functions allows the experimenter to use any number of detectors for data collection before forwarding up to 64 spectra to the display unit, thereby increasing data throughput over that available with commercial systems. An IBM PC was chosen for the low-cost, general purpose display unit. Up to four spectra may be displayed simultaneously in different colors. The histogram saves 1024 channels per detector, 640 of which may be distinctly displayed per spectra. The IEEE-488 standard provides the data path between the IBM PC and the data collection unit. Data is sent to the PC under interrupt control, using direct memory access. Display manipulations available via keyboard are also discussed

Advancement of the state system of accounting for mainframe to personal computer (PC) technology

International Nuclear Information System (INIS)

Proco, G.; Nardi, J.

1999-01-01

The advancement of the U.S. government's state system of accounting from a mainframe computer to a personal computer (PC) had been successfully completed. The accounting system, from 1965 until 1995 a mainframe application, was replaced in September 1995 by an accounting system employing local area network (LAN) capabilities and other state-of-the-art characteristics. The system is called the Nuclear Materials Management and Safeguards System (NMMSS), tracking nuclear material activities and providing accounting reports for a variety of government and private users. The uses of the system include not only the tracking of nuclear materials for international and domestic safeguards purposes but also serving to facilitate the government's resource management purposes as well. The system was converted to PC hardware and fourth generation software to improve upon the mainframe system. The change was motivated by the desire to have a system amenable to frequent modifications, to improve upon services to users and to reduce increasing operating costs. Based on two years of operating the new system, it is clear that these objectives were met. Future changes to the system are inevitable and the national system of accounting for nuclear materials has the technology base to meet the challenges with proven capability. (author)

The Davros III supervisory control system

International Nuclear Information System (INIS)

Rice, P.

1996-01-01

Magnox Electric's Remote Operations Branch deploy a wide variety of remote inspection and maintenance tools into nuclear plant in order to perform a variety of tasks. In recent years much progress has been made on low-level control of individual manipulator axes, and a parallel need has emerged for a supervisory system to assist the operator in the control of the whole system. Some requirements are: 1) to improve operator control of systems; 2) to simplify software maintenance and version control; 3) to reduce the likelihood of damage to manipulators; 4) to assist with rehearsals and simulations. Davros III is a PC software system which has been developed over a number of years to address these requirements. In a single program capable of being configured for a wide variety of applications, it provides a technique for following pretaught routes, a comprehensive and fully configurable interlock system and several different facilities for simulation. (author)

The Davros III supervisory control system

International Nuclear Information System (INIS)

Rice, P.

1996-01-01

Magnox Electric's Remote Operations Bbranch deploy a wide variety of remote inspection and maintenance tools into nuclear plant in order to perform a variety of tasks. In recent years much progress has been made on low-level control of individual manipulator axes and a parallel need has emerged for a supervisory system to assist the operator in the control of the whole system. Some requirements are: 1, To improve operator control of systems. 2, To simplify software maintenance and version control. 3, To reduce the likelihood of damage to manipulators. 4, To assist with rehearsals and simulations. Davros III is a PC software system which has been developed over a number of years to address these requirements. In a single program capable of being configured for a wide variety of applications, it provides a technique for following pretaught routes, a comprehensive and fully configurable interlock system and several different facilities for simulation. (author)

Wind-induced cable vibrations and countermeasures of cables of PC cable-stayed bridge. PC syachokyo keburu no kaze ni yoru shindo to sono taisaku

Energy Technology Data Exchange (ETDEWEB)

Yoneda, M. (Kawada Industries Inc., Tokyo (Japan))

1994-05-01

In recent years, long span of cable-stayed bridges is remarkable. The wind-induced cable vibration called as line vibration and wake galloping was given as an important problem not only in the steel cable-stayed bridges but also in the PC cable-stayed bridges. The technical engineers in design of the cable-stayed bridges have many times to confront the problems on the vibration control of cables, it is considered that sufficient understand of the wind-induced vibration and countermeasures for cables of the PC cable-stayed bridges is necessary. Many reports on the countermeasure examples and trend of vibration control centred on cables of the cable-stayed bridges have been published. In this paper, the wind-induced vibration of cables in the cable-stayed bridges was reviewed, the examples of countermeasures of vibration control on cables in the PC cable-stayed bridges was mainly introduced. The remaining tasks and future prospects on vibration control of the PC cable-stayed bridges were described. 14 refs., 13 figs., 4 tabs.

Actinyl chemistry at the Centre for Radiochemistry Research

International Nuclear Information System (INIS)

May, Iain; Copping, Roy; Cornet, Stephanie M.; Talbot-Eeckelears, Catherine E.; Gaunt, Andrew J.; John, Gordon H.; Redmond, Mike P.; Sharrad, Clint A.; Sutton, Andrew D.; Collison, David; Fox, O. Danny; Jones, Chris J.; Sarsfield, Mark J.; Taylor, Robin J.

2007-01-01

Increasing our basic chemical knowledge of the actinyl cations ({AnO 2 } 2+/+ , where An = U, Np, Pu or Am) is vital for underpinning the development of novel nuclear waste management and nuclear fuel processing technologies, as well as increasing our understanding of actinide behaviour in the environment. Over recent years there have been significant advances made in uranyl, neptunyl and plutonyl chemistry, with the main focus on uranyl. At the Centre for Radiochemistry Research (CRR), University of Manchester, there are ongoing projects investigating the coordination chemistry of the actinyl cations. These projects are undertaken at the CRR and at higher specific activity alpha facilities accessed through Nexia Solutions and the EU ACTINET programme, as well as concomitant computational chemistry projects at University College London. Recent discoveries have included the complexation of transuranic actinyl cations with tri-lacunary heteropolytungstate ligands and spectroscopic and structural evidence for the direct coordination of the pertechnetate anion to {UO 2 } 2+

Glycosaminoglycan composition of PC12 pheochromocytoma cells: a comparison with PC12D cells, a new subline of PC12 cells

Energy Technology Data Exchange (ETDEWEB)

Katoh-Semba, R.; Oohira, A.; Sano, M.; Watanabe, K.; Kitajima, S.; Kashiwamata, S.

1989-03-01

PC12D cells, a new subline of conventional PC12 cells, respond not only to nerve growth factor but also to cyclic AMP by extending their neurites. These cells are flat in shape and are similar in appearance to PC12 cells that have been treated with nerve growth factor for a few days. In both cell lines, we have characterized the glycosaminoglycans, the polysaccharide moieties of proteoglycans, which are believed to play an important role in cell adhesion and in cell morphology. Under the present culture conditions, only chondroitin sulfate was detected in the media from PC12 and PC12D cells, whereas both chondroitin sulfate and heparan sulfate were found in the cell layers. The levels of cell-associated heparan sulfate and chondroitin sulfate were about twofold and fourfold higher in PC12D cells than in PC12 cells, respectively. Compared to PC12 cells, the amounts of (/sup 35/S)sulfate incorporated for 48 h into chondroitin sulfate were twofold lower but those into heparan sulfate were 35% higher in PC12D cells. The amount of chondroitin sulfate released by PC12D cells into the medium was about a half of that released by PC12 cells. The ratio of (/sup 35/S)sulfate-labeled heparan sulfate to chondroitin sulfate was 6.2 in PC12D cells and 2.2 in PC12 cells. These results suggest that there may be some correlation between the increase in content of glycosaminoglycans and the change in cell morphology, which is followed by neurite outgrowth.

Capillary pressure and saturation relations for supercritical CO2 and brine in sand: High-pressure Pc(Sw) controller/meter measurements and capillary scaling predictions

Science.gov (United States)

Tokunaga, Tetsu K.; Wan, Jiamin; Jung, Jong-Won; Kim, Tae Wook; Kim, Yongman; Dong, Wenming

2013-08-01

In geologic carbon sequestration, reliable predictions of CO2 storage require understanding the capillary behavior of supercritical (sc) CO2. Given the limited availability of measurements of the capillary pressure (Pc) dependence on water saturation (Sw) with scCO2 as the displacing fluid, simulations of CO2 sequestration commonly rely on modifying more familiar air/H2O and oil/H2O Pc(Sw) relations, adjusted to account for differences in interfacial tensions. In order to test such capillary scaling-based predictions, we developed a high-pressure Pc(Sw) controller/meter, allowing accurate Pc and Sw measurements. Drainage and imbibition processes were measured on quartz sand with scCO2-brine at pressures of 8.5 and 12.0 MPa (45°C), and air-brine at 21°C and 0.1 MPa. Drainage and rewetting at intermediate Sw levels shifted to Pc values that were from 30% to 90% lower than predicted based on interfacial tension changes. Augmenting interfacial tension-based predictions with differences in independently measured contact angles from different sources led to more similar scaled Pc(Sw) relations but still did not converge onto universal drainage and imbibition curves. Equilibrium capillary trapping of the nonwetting phases was determined for Pc = 0 during rewetting. The capillary-trapped volumes for scCO2 were significantly greater than for air. Given that the experiments were all conducted on a system with well-defined pore geometry (homogeneous sand), and that scCO2-brine interfacial tensions are fairly well constrained, we conclude that the observed deviations from scaling predictions resulted from scCO2-induced decreased wettability. Wettability alteration by scCO2 makes predicting hydraulic behavior more challenging than for less reactive fluids.

APPLICATION OF A PLC TO A LABORATORY COMPRESSOR WORKSHOP CONTROL SYSTEM

Directory of Open Access Journals (Sweden)

Wojciech GÓRA

2016-06-01

Full Text Available In this paper a control system of air compressors in a university laboratory is presented. The control system, which is built using the Astraada RCC972 and the GE 90-20 drivers, is an extension of the two states’ inputs and outputs of Astraada. To visualize the work stand, the PC computer class and the Proficy Machine Edition (ME View software were applied. Selected results from the tests of the built control system are presented.

PC Farms for Offline Event Reconstruction at Fermilab

International Nuclear Information System (INIS)

Beretvas, A.

1997-03-01

Fermilab is investigating the use of PC's for HEP computing. As a first step we have built a full offline environment under Linux on a set of Pentium (P5) and Pentium Pro (P6) machines (the ''PC Farm''). The Pythia simulation has been ported to run serially and in parallel (using CPS) on the PC Farm. Fermilab software products and CDF offline packages have also been ported to Linux. Run 1 CDF data has been analyzed on both Linux and SGI (Irix) with essentially identical results. The performance of the system is compared to results with commercial UNIX systems

Century of radiochemistry. History and future

International Nuclear Information System (INIS)

Myasoedov, B.F.

2000-01-01

Several periods in radiochemistry development history are observed. In the report the sources of radionuclide income into environment are examined including long-lived transuranic elements on the different stages of full nuclear fuel cycle. Radioactive substance contamination analysis is given for different regions of Russia from natural and man-caused sources. Potential danger of long-lived radionuclide and transuranic element presence in the wastes of nuclear fuel cycle plants is shown. Data related with the sequences of nuclear weapon testing on the proving grounds near Semipalatinsk, and Novaya Zemlya are presented. The modern radioecological situation around the reprocessing plant 'Mayak', which was constructed more than 40 years ago for the production of plutonium for military purposes, is overviewed. The following topics are considered: lake Karachay; artificial water reservoirs contaminated by radionuclides; solid radioactive wastes and their vitrification. Some new approaches, methods and tools developed at the Vernadsky Institute of Russian Academy of Sciences for determination of different radionuclides in various environmental samples from the impact zone of the facility are discussed. The data on distribution, occurrence forms and migration processes of 90 Sr, 137 Cs, 237 Np, 239 Pu, and 241 Am in aquatic and terrestrial ecosystems are presented. (author)

A complete closed loop control system for MNSR

International Nuclear Information System (INIS)

Wang Liyu

1988-01-01

The MNSR (Miniature Neutron Source Reactor), a 27 kW reactor, was built in 1984 in the Institute of Atomic Energy, Beijing, China. A microcomputer closed-loop control system has been developed for the MNSR using an IBM PC-XT. This system not only controls the reactor, but it is also a data acquisition system and a reactivity monitor for the reactor. A closed-loop control system can be used for reactors such as the MNSR, in which the power is self-limited and the reactivity is limited to less than 5mk (∼0.7$). As a data acquisition system or a reactivity monitor, it is applicable for any nuclear reactor. This paper describes the hardware and software in detail. 4 refs, 11 figs

The new ENSDF search system NESSY: IBM/PC nuclear spectroscopy database

International Nuclear Information System (INIS)

Boboshin, I.N.; Varlamov, V.V.

1996-01-01

The universal relational nuclear structure and decay database NESSY (New ENSDF Search SYstem) developed for the IBM/PC and compatible PCs, and based on the international file ENSDF (Evaluated Nuclear Structure Data File), is described. The NESSY provides the possibility of high efficiency processing (the search and retrieval of any kind of physical data) of the information from ENSDF. The principles of the database development are described and examples of applications are presented. (orig.)

Automatic control variac system for electronic accelerator

International Nuclear Information System (INIS)

Zhang Shuocheng; Wang Dan; Jing Lan; Qiao Weimin; Ma Yunhai

2006-01-01

An automatic control variac system is designed in order to satisfy the controlling requirement of the electronic accelerator developed by the Institute. Both design and operational principles, structure of the system as well as the software of industrial PC and micro controller unit are described. The interfaces of the control module are RS232 and RS485. A fiber optical interface (FOC) could be set up if an industrial FOC network is necessary, which will extend the filed of its application and make the communication of the system better. It is shown in practice that the system can adjust the variac output voltage automatically and assure the accurate and automatic control of the electronic accelerator. The system is designed in accordance with the general design principles and possesses the merits such as easy operation and maintenance, good expansibility, and low cost, thus it could also be used in other industrial branches. (authors)

Production controls (PC) and technical verification testing (TVT). A methodology for the control and tracking of LILW waste package conditioning

International Nuclear Information System (INIS)

Leon, A.M.; Nieto, J.L.L.; Garrido, J.G.

2003-01-01

As part of its low and intermediate level radioactive waste (LILW) characterisation and acceptance activities, ENRESA has set up a quality control programme that covers the different phases of radioactive waste package production and implies different levels of tracking in generation, assessment of activity and control of the documentation associated therewith. Furthermore, ENRESA has made available the mechanisms required for verification, depending on the results of periodic sampling, of the quality of the end product delivered by the waste producers. Both processes are included within the framework of two programmes of complementary activities: production controls (PC) and technical verification testing (TVT). (orig.)

Advanced control system for the scattering chamber of K-130 cyclotron

International Nuclear Information System (INIS)

Bhaumik, Tapas Kumar; Saha, Amiya Kumar; Mandal, Bidhan Chandra; Adak, Debabrata; Purkait, Monirul; Bhattacharya, Sailajananda

2013-01-01

The old relay based position control system of the Scattering Chamber of K-130 Cyclotron was more than 30 years old, developed multiple problems over the years, and the components of the control system like relays, potentiometers, limit switches, radiation resistant cables were not functioning as per specifications. It has been replaced recently by a new PLC based embedded control system. This has been developed using Advantech ADAM-5510EKW 16 bit CPU together with required I/O modules. MULTIPROG Basic V.4.6 has been used as programming software and Ladder Diagram has been used to realize control scheme of the PLC. A resistive type touch screen based operator panel, WebOP-2104VN4AE has been mounted on the control rack for local control. iFIX SCADA, 75 tags Runtime Version 5.1 has been used to operate from remote PC connected to the PLC by 70m CAT6 cable. The PLC communicates with the touch panel and remote PC through 100 Mbps Ethernet switch. The Graphical User Interfaces of the local control panel and the remote panel have been developed as per the requirement from the users. All the old sensors, limit switches, relays and cables have been replaced by new items. This paper reports about the development and commissioning of basic hardware, software and operation of the control system for last six months. (author)

An automatic energy-saving and thermal monitoring/controlling system for a pond

Directory of Open Access Journals (Sweden)

Cheng Ching-Chien

2017-01-01

Full Text Available Because of low temperatures and oxygen in cold water, fish will die when cold currents arrive. This will cause tremendous loss of money. In order reduce the cooling of the pond, an automatic thermal detecting and cold-roofing system using a wind-proofing device, heaters, and thermal detectors is proposed. To reduce heat loss due to thermal convection above the pond surface, a motor-driven wind-proofing device automatically controlled by a PLC controller is adopted. Here, the wind-proofing device, thermal detectors, and heating system are connected to the PLC controller. The PLC will also be connected to the PC interface. The temperature thresholds used to trigger the heater and the wind proofing device can be set at the PC interface. Two options for manipulating the heating and the automatic heating can be selected. The related wind-proofing area and the number of heaters will be determined according to the current temperature. Moreover, the PLC can be wirelessly connected to the server PC in the control room. The pond keeper can monitor everything online and control the pond water's temperature. With this, the problem of fish dying in a cold wave can be solved. Consequently, to reduce the electrical exhaust when heating up the pond water, green energy, solar energy and wind energy, is used.

Performance of predictive models in phase equilibria of complex associating systems: PC-SAFT and CEOS/GE

Directory of Open Access Journals (Sweden)

N. Bender

2013-03-01

Full Text Available Cubic equations of state combined with excess Gibbs energy predictive models (like UNIFAC and equations of state based on applied statistical mechanics are among the main alternatives for phase equilibria prediction involving polar substances in wide temperature and pressure ranges. In this work, the predictive performances of the PC-SAFT with association contribution and Peng-Robinson (PR combined with UNIFAC (Do through mixing rules are compared. Binary and multi-component systems involving polar and non-polar substances were analyzed. Results were also compared to experimental data available in the literature. Results show a similar predictive performance for PC-SAFT with association and cubic equations combined with UNIFAC (Do through mixing rules. Although PC-SAFT with association requires less parameters, it is more complex and requires more computation time.

FPGA based Smart Wireless MIMO Control System

International Nuclear Information System (INIS)

Ali, Syed M Usman; Hussain, Sajid; Siddiqui, Ali Akber; Arshad, Jawad Ali; Darakhshan, Anjum

2013-01-01

In our present work, we have successfully designed, and developed an FPGA based smart wireless MIMO (Multiple Input and Multiple Output) system capable of controlling multiple industrial process parameters such as temperature, pressure, stress and vibration etc. To achieve this task we have used Xilin x Spartan 3E FPGA (Field Programmable Gate Array) instead of conventional microcontrollers. By employing FPGA kit to PC via RF transceivers which has a working range of about 100 meters. The developed smart system is capable of performing the control task assigned to it successfully. We have also provided a provision to our proposed system that can be accessed for monitoring and control through the web and GSM as well. Our proposed system can be equally applied to all the hazardous and rugged industrial environments where a conventional system cannot work effectively

The new real-time control and data acquisition system for an experimental tritium removal facility

International Nuclear Information System (INIS)

Stefan, Iuliana; Stefan, Liviu; Retevoi, Carmen; Balteanu, Ovidiu; Bucur, Ciprian

2006-01-01

Full text: The purpose of the paper is to present a real-time control and data acquisition system based on virtual instrumentation (LabView, compact I/O) applicable to an experimental heavy water detritiation plant. The initial data acquisition system based on analogue instruments is now upgraded to a fully digital system, this because of greater flexibility and capability than analogue hardware what allows easy modifications of the control system. Virtual instrumentation became lately much used for monitoring and controlling the operational parameters in plants. In the specific case of ETRF there are a lot of process parameters which have to be monitored and controlled. The essential improvement in the new system is the collection of all signals and control functions by a PC, what makes any changes in configuration easy. The system hardware-PC with embedded controllers is selected, as most cost effective. The LabView platform provides faster program development with a convenient user interface. The system provides independent digital control of each parameters and records data of the process. The system is flexible and has the advantage of further extension. (authors)

Radiochemistry Division: annual progress report for 1980

International Nuclear Information System (INIS)

Jayadevan, N.C.; Manohar, S.B.

1982-01-01

The research and development (R and D) activities of the Radiochemistry Division of the Bhabha Atomic Research Centre (BARC), Bombay, during 1980 are reported in the form of individual summaries under the headings: reactor chemistry, heavy element chemistry, process chemistry (of actinides), nuclear chemistry and instrumentation. Some of the highlights of the R and D activities are: (1) setting up of the facilities for the prepa.ration of (U,Pu)O 2 microspheres by sot-gel process on laboratory scale, (2) studies on synergistic extraction of Am, Cm, Bk, Cf, Th(IV), Np(IV) and Pu(IV) with mixtures of TTA and oxodonor6s like TBP, (3) kinetics of radiation induced oxidation of Pu(IV) and that of reduction of Pu(VII), (4) determination of fission yields of 138 Xe, 139 Cs, 252 Cf and 229 Th, (5) measuring of gamma ray abundance of 229 Th and isotopic ratios in thorium and plutonium and (6) design and fabrication of an osmistor for the determination of the molecular weight of actinide complexes. A list of papers published in journals and papers presented at conference/symposia during the year is also given. (M.G.B.)

Radiochemistry Division: Annual progress report for 1981

International Nuclear Information System (INIS)

Jayadevan, N.C.; Manohar, S.B.

1983-01-01

The progress report of the Radiochemistry Division of Bhabha Atomic Research Centre presents the research and development work carried out during 1981 in the form of individual summaries arranged under the headings: reactor fuel chemistry, heavy element chemistry, radioanalytical chemistry, and nuclear chemistry. Some of the highlights of the work are: (1) modification of the gelation set-up for making plutonium containing gel particles to get better yields of (U,Pu)O 2 containing up to 15% of plutonium, (2) studies on solvent extraction of Am(III), Cm(III), Bk(III) and Cf(III) by 1-phenyl-2-methyl-4-benzoyl pyrazolone-5 (HPMBP), (3) study of the radiation chemistry and photochemistry of aqueous solutions of plutonium, (4) study of crystal structure of uranyl oxalate and sulphates, (5) ESR study, thermoluminescence and spectral studies of americium doped SrSO 4 , phosphors, (6) determination of uranium and plutonium by spectrophotometry, mass spectroscopy and alpha spectroscopy, (7) determination of isotopic ratios of plutonium isotopes by gamma spectroscopy, (8) studies on several aspects of fission chemistry of 229 Th and 252 Cf, and (9) fabrication of a neutron well coincidence counter. (M.G.B.)

Characterization of past and present waste streams from the 325 Radiochemistry Building

International Nuclear Information System (INIS)

Pottmeyer, J.A.; Weyns-Rollosson, M.I.; Dicenso, K.D.; DeLorenzo, D.S.; Duncan, D.R.

1993-12-01

The purpose of this report is to characterize, as far as possible, the solid waste generated by the 325 Radiochemistry Building since its construction in 1953. Solid waste as defined in this document is any containerized or self-contained material that has been declared waste. This characterization is of particular interest in the planning of transuranic (TRU) waste retrieval operations including the Waste Receiving and Processing (WRAP) Facility. Westinghouse Hanford Company (Westinghouse Hanford) and Battelle Pacific Northwest Laboratory (PNL) activities at Building 325 have generated approximately 4.4% and 2.4%, respectively, of the total volume of TRU waste currently stored at the Hanford Site

A low-cost general purpose spectral display unit using an IBM PC

International Nuclear Information System (INIS)

Robinson, S.L.

1986-01-01

Many physics experiments require acquisition and analysis of spectral data. Commercial minicomputer-based multichannel analyzers collect detected counts at various energies, create a histogram of the counts in memory, and display the resultant spectra. They acquire data and provide the user-to-display interface. The system discussed separates functions into the three modular components of data acquisition, storage, and display. This decoupling of functions allows the experimenter to use any number of detectors for data collection before forwarding up to 64 spectra to the display unit, thereby increasing data throughput over that available with commercial systems. An IBM PC was chosen for the low-cost, general purpose display unit. Up to four spectra may be displayed simultaneously in different colors. The histogram saves 1024 channels per detector, 640 of which may be distinctly displayed per spectra. The IEEE-488 standard provides the data path between the IBM PC and the data collection unit. Data is sent to the PC under interrupt control, using direct memory access. Display manipulations available via keyboard are also discussed

Disk cloning program 'Dolly+' for system management of PC Linux cluster

International Nuclear Information System (INIS)

Atsushi Manabe

2001-01-01

The Dolly+ is a Linux application program to clone files and disk partition image from a PC to many others. By using several techniques such as logical ring connection, multi threading and pipelining, it could achieve high performance and scalability. For example, in typical condition, installations to a hundred PCs takes almost equivalent time for two PCs. Together with the Intel PXE and the RedHat kickstart, automatic and very fast system installation and upgrading could be performed

Eurac: a project to strengthen scientific academic competence and analytical skills within radiation protection, radiochemistry and radioecology

Energy Technology Data Exchange (ETDEWEB)

Tamponnet, C. [Institut de Radioprotection et de Surete Nucleaire, 13 - Saint Paul lez Durance (France); Salbu, B.; Skipperud, L. [Norwegian Univ. of Life Sciences, Aas (Norway); Mitchell, P. [University College Dublin, Dublin (Ireland); Holm, E. [Lund Univ. (Sweden); Garciatenorio, R. [Seville Univ. (Spain); Kovats, N. [Veszprem Univ. (Hungary); Abbott, A. [Westlakes Research Institute, Moor Row (United Kingdom); Davids, C. [Norwegian Radiation Protection Authority, Osteras (Norway); Garelick, H.; Priest, N. [Middlesex Univ., Enfield (United Kingdom)

2006-07-01

The E.u.r.a.c. project is consultative or consensual and aims to assess the current and potential levels of postgraduate provision in selected linked disciplines associated with radiological protection and radioecological competence within universities and other higher education institutes of the Eu and new entrant nations in the context of demand. Based on consultations with European stakeholders E.u.r.a.c. will propose those actions that could be taken by European Institutions and relevant organisations in Member States to secure the future of nuclear radiological protection, radiochemistry and radioecology postgraduate education in an expanded Eu. The objective are: assess the needs for co-ordinated postgraduate education in the Eu and new entrant nations in order to strengthen the scientific academic competence and analytical skills within radiological protection, radiochemistry and radioecology, secure the future recruitment of appropriately skilled postgraduates to meet the needs of European stakeholders; recommend, following consultations, actions that could be taken within the Eu to help the postgraduate education needs identified. four work packages are studied: determination of existing competence and infrastructures, estimation of future scientific needs, development of possible postgraduate education solutions, assessments and recommendations. (N.C.)

Eurac: a project to strengthen scientific academic competence and analytical skills within radiation protection, radiochemistry and radioecology

International Nuclear Information System (INIS)

Tamponnet, C.; Salbu, B.; Skipperud, L.; Mitchell, P.; Holm, E.; Garciatenorio, R.; Kovats, N.; Abbott, A.; Davids, C.; Garelick, H.; Priest, N.

2006-01-01

The E.u.r.a.c. project is consultative or consensual and aims to assess the current and potential levels of postgraduate provision in selected linked disciplines associated with radiological protection and radioecological competence within universities and other higher education institutes of the Eu and new entrant nations in the context of demand. Based on consultations with European stakeholders E.u.r.a.c. will propose those actions that could be taken by European Institutions and relevant organisations in Member States to secure the future of nuclear radiological protection, radiochemistry and radioecology postgraduate education in an expanded Eu. The objective are: assess the needs for co-ordinated postgraduate education in the Eu and new entrant nations in order to strengthen the scientific academic competence and analytical skills within radiological protection, radiochemistry and radioecology, secure the future recruitment of appropriately skilled postgraduates to meet the needs of European stakeholders; recommend, following consultations, actions that could be taken within the Eu to help the postgraduate education needs identified. four work packages are studied: determination of existing competence and infrastructures, estimation of future scientific needs, development of possible postgraduate education solutions, assessments and recommendations. (N.C.)

The research on algorithms for optoelectronic tracking servo control systems

Science.gov (United States)

Zhu, Qi-Hai; Zhao, Chang-Ming; Zhu, Zheng; Li, Kun

2016-10-01

The photoelectric servo control system based on PC controllers is mainly used to control the speed and position of the load. This paper analyzed the mathematical modeling and the system identification of the servo system. In the aspect of the control algorithm, the IP regulator, the fuzzy PID, the Active Disturbance Rejection Control (ADRC) and the adaptive algorithms were compared and analyzed. The PI-P control algorithm was proposed in this paper, which not only has the advantages of the PI regulator that can be quickly saturated, but also overcomes the shortcomings of the IP regulator. The control system has a good starting performance and the anti-load ability in a wide range. Experimental results show that the system has good performance under the guarantee of the PI-P control algorithm.

Integrated PC-based system for detecting and parameter monitoring at the Dubna Gas Filled Recoil Separator

International Nuclear Information System (INIS)

Tsyganov, Yu.S.; Polyakov, A.N.; Sukhov, A.M.

2012-01-01

New detection system of the Dubna Gas Filled Recoil Separator (DGFRS) was put into operation in May 2012. It includes 32-strip position sensitive PIPS detector manufactured by CANBERRA NV, 24-strip back side PIPS detector, 8-strip V ETO P IPS detector, time-of-flight low pressure (∼1.7 Torr) pentane-filled gaseous detector, CAMAC fast ADC's with 5 μs dead time per three signals (energy, top position, bottom position), modified CC012 crate controller and PC-based C ++ Builder code for spectrometry data acquisition. New parameter monitoring system (project) is reported too together with the brief review of the present system. It is planned to put into operation with this system during 2013-2014. Examples of applications in the long-term experiments aimed at the synthesis of superheavy elements in 48 Ca induced complete fusion nuclear reactions are also presented. Namely with the DGFRS facility 45 new isotopes of superheavy nuclei were synthesized since 2001

New digital control and power protection system of VR 1 training reactor

International Nuclear Information System (INIS)

Kropik, M.; Matejka, K.; Juoeickova, M.

2005-01-01

The contribution describes the new VR-1 training reactor control and power protection system at the Czech Technical University in Prague. The control system provides safety and control functions, calculates average values of the important variables and sends data and system status to the human-machine interface. The upgraded control system is based on a high quality industrial PC. The operating system of the PC is the Microsoft Windows XP with the real time support RTX of the VentureCom Company. The software was developed according to requirements in MS Visual C. The independent power protection system is a component of the reactor safety (protection) system with high quality and reliability requirements. The digital system is redundant; each channel evaluates the reactor power and the velocity of power changes and provides safety functions. The digital part of the channel is multiprocessor-based. The software was developed with respect to nuclear standards. The software design was coded in the C language regarding the NRC restrictions. Configuration management, verification and validation accompanied the software development. Both systems were thoroughly tested. Firstly, the non active tests were carried out. During these tests, the active core of the reactor was subcritical; the input signals were generated from HPIB and VXI controlled instruments to simulate different operational and safety events. The software for instruments control and tests evaluation utilized Agilent VEE development system. After the successful non active checking, the active tests followed. (author)

Quality assessment of platelet concentrates prepared by platelet rich plasma-platelet concentrate, buffy coat poor-platelet concentrate (BC-PC and apheresis-PC methods

Directory of Open Access Journals (Sweden)

Singh Ravindra

2009-01-01

. As compared to the above two platelet concentrates, all the units of apheresis-PC fulfilled the desired quality control criteria of volume. Apheresis-PC units showed better swirling and platelet count than PRP-PCs and BC-PCs. All the platelet concentrates units had pH well above the recommended norm.

VVER-1000 RPV Head Examination Control System

International Nuclear Information System (INIS)

Erak, Z.; Gortan, K.

2006-01-01

This article presents the electronic system used for automated NDT examination of VVER-1000 Reactor Pressure Vessel Head (RPVH). The control system drives the inspection tool with end-effectors to needed position. When the final position is reached, the eddy current and ultra sound acquisition system performs the data acquisition. The system is composed of 3 layers. The first layer is the hardware layer consisting of motors driving the tool and end-effectors along with sensors needed to obtain the positioning data. The second layer is the MAC-8 control system performing basic monitoring and control routines as an interconnection between first and third layer. The third layer is the control software, running on PC, which is used as a human-machine-interface. Presentation contains details of examination techniques with focus on eddy current examination as well as details on manipulator and end effectors developed by Inetec for VVER-1000 RPVH examination.(author)

The NSC 16 MV tandem accelerator control system

International Nuclear Information System (INIS)

Ajith Kumar, B.P.; Kannaiyan, J.; Sugathan, P.; Bhowmik, R.K.

1994-01-01

The computerized control system for the 16 MV Pelletron accelerator at the Nuclear Science Centre runs on a PC-AT 386 computer. Devices in the accelerator are interfaced to the computer by using a CAMAC Serial Highway. The software, written in C, is Database oriented and supports many features useful for the accelerator operation. The control console consists of an EGA monitor, keyboard, assignable control knobs and meters, a diagrammatic display showing the overall status of the machine and a similar panel for showing the status of radiation safety interlocks. The system has been operational for the past three years and is discussed below. (orig.)

Quality Control Guidelines for SAM Radiochemical Methods

Science.gov (United States)

Learn more about quality control guidelines and recommendations for the analysis of samples using the radiochemistry methods listed in EPA's Selected Analytical Methods for Environmental Remediation and Recovery (SAM).

A PC-based discrete event simulation model of the Civilian Radioactive Waste Management System

International Nuclear Information System (INIS)

Airth, G.L.; Joy, D.S.; Nehls, J.W.

1991-01-01

A System Simulation Model has been developed for the Department of Energy to simulate the movement of individual waste packages (spent fuel assemblies and fuel containers) through the Civilian Radioactive Waste Management System (CRWMS). A discrete event simulation language, GPSS/PC, which runs on an IBM/PC and operates under DOS 5.0, mathematically represents the movement and processing of radioactive waste packages through the CRWMS and the interaction of these packages with the equipment in the various facilities. This model can be used to quantify the impacts of different operating schedules, operational rules, system configurations, and equipment reliability and availability considerations on the performance of processes comprising the CRWMS and how these factors combine to determine overall system performance for the purpose of making system design decisions. The major features of the System Simulation Model are: the ability to reference characteristics of the different types of radioactive waste (age, burnup, etc.) in order to make operational and/or system design decisions, the ability to place stochastic variations on operational parameters such as processing time and equipment outages, and the ability to include a rigorous simulation of the transportation system. Output from the model includes the numbers, types, and characteristics of waste packages at selected points in the CRWMS and the extent to which various resources will be utilized in order to transport, process, and emplace the waste

Quality assurance program for prototype stereotactic system developed for neptun 10 Pc linac

International Nuclear Information System (INIS)

Khoshbin Khoshnazar, A.R.; Bahreyni Toossi, M.T.; Hashemiyan, A.R.; Bahreyni Toossi, M.T.; Salek, R.

2005-01-01

A prototype stereotactic radiosurgery set was designed and constructed for a Neptun 10 Pc linac that is currently being used at Imam Reza hospital in Mashad. Materials and Methods: A complete quality assurance program was designed and performed for the constructed system including isocentric accuracy test, localization accuracy test, dose delivery accuracy test and leakage radiation test. Target simulator, control alignment device and plexiglass phantom which were parts of the developed hardware were used to fulfill quality assurance program. Results: The average isocentric shift resulted from the gantry rotation and couch turning were respectively obtained to be 1.4 and 2 mm. The average localization error in the three coordinates was found to be 2.2 mm. The total treatment uncertainty due to all of the probable errors in the system was equal to 4.32 mm. The dose delivery accuracy test was carried out, the result indicated a 3.7% difference between the given and measured dose. Conclusion: The quality assurance tests showed consistent performance of the constructed system within the accepted limits; however, some inconsistency might exist in certain cases. The safety of stereotactic radiosurgery system method is increased when the overall uncertainty is minimized nd the treatment of the lesions adjacent to critical organs is avoided

The USL NASA PC R and D project: General specifications of objectives

Science.gov (United States)

Dominick, Wayne D. (Editor)

1984-01-01

Given here are the general specifications of the objectives of the University of Southwestern Louisiana Data Base Management System (USL/DBMS) NASA PC R and D Project, a project initiated to address future R and D issues related to PC-based processing environments acquired pursuant to the NASA contract work; namely, the IBM PC/XT systems.

Ultrasonic Control of welded joints by using specific PC generated AVG diagrams

International Nuclear Information System (INIS)

Rondon Torriente, S.; Galeano Alvarez, N.J.; Frometas Castillo, T.; Gonzalez Mastrapa, J.J. Unidad Presupuestada Inversionista Para la Construccion de la Central Electronuclear de Juragua, Juragua . Laboratorio de Metales.

1996-01-01

This paper describes an algoritm easy to be implemented in a modern personnel computer (PC), which can be used to obtain the specific AVG diagrams required during the ultrasonic control of welded joints by the AVG method. The algoritm is illustrated by means of the derivation of some specific diagrams corresponding to given inspection testing. Also some results and standard practices given in recent issues of several international codes are outlined, which can be used in recent issues of several international codes are outlined, which can be used to overcome common problems founded during the practical use of the AVG method with conventional shear wave ultrasonic transducers

Found a USB stick? Go and infect your PC!

CERN Document Server

Computer Security Team

2012-01-01

Err. Wait. Please no! USB sticks are not innocent little things. They can quickly mutate into malicious nasty beasts! Just in the recent past, at least two physics experiments were suffering as their control and data acquisition PCs, respectively, were infected by USB sticks holding malicious code. A bit longer ago, a series of laptops were infected at a 2008 computing conference as an infected USB stick made its tour around. Bad luck for those who ran a Windows operating system and inserted that stick…   So, you found a USB stick in the cafeteria? Take care. If this were a lollipop, you wouldn’t just pick it up and lick it, would you? So beware of USB sticks whose origin or previous usage you don’t know. They might infect your PC once plugged in. In order to be on the safe side, accept and share only USB sticks whose owner you trust. Run up-to-date anti-virus software on your PC, make sure that its operating system is patched...

Application of an integrated PC-based neutronics code system to criticality safety

International Nuclear Information System (INIS)

Briggs, J.B.; Nigg, D.W.

1991-01-01

An integrated system of neutronics and radiation transport software suitable for operation in an IBM PC-class environment has been under development at the Idaho National Engineering Laboratory (INEL) for the past four years. Four modules within the system are particularly useful for criticality safety applications. Using the neutronics portion of the integrated code system, effective neutron multiplication values (k eff values) have been calculated for a variety of benchmark critical experiments for metal systems (Plutonium and Uranium), Aqueous Systems (Plutonium and Uranium) and LWR fuel rod arrays. A description of the codes and methods used in the analysis and the results of the benchmark critical experiments are presented in this paper. In general, excellent agreement was found between calculated and experimental results. (Author)

Control System Design of the YWZ Multi-Fingered Dexterous Hand

Directory of Open Access Journals (Sweden)

Wenzhen Yang

2012-07-01

Full Text Available The manipulation abilities of a multi-fingered dexterous hand, such as motion in real-time, flexibility, grasp stability etc., are largely dependent on its control system. This paper developed a control system for the YWZ dexterous hand, which had five fingers and twenty degrees of freedom (DOFs. All of the finger joints of the YWZ dexterous handwere active joints driven by twenty micro-stepper motors respectively. The main contribution of this paper was that we were able to use stepper motor control to actuate the hand's fingers, thus, increasing the hands feasibility. Based the actuators of the YWZ dexterous hand, we firstly developed an integrated circuit board (ICB, which was the communication hardware between the personal computer (PC and the YWZ dexterous hand. The ICB included a centre controller, twenty driver chips, a USB port and other electrical parts. Then, a communication procedure between the PC and the ICB was developed to send the control commands to actuate the YWZ dexterous hand. Experiment results showed that under this control system, the motion of the YWZ dexterous hand was real-time; both the motion accuracy and the motion stability of the YWZ dexterous hand were reliable. Compared with other types of actuators related to dexterous hands, such as pneumatic servo cylinder, DC servo motor, shape memory alloy etc., experiment results verified that the stepper motors as actuators for the dexterous handswere effective, economical, controllable and stable.

Performance characterization of the PET-CT tomograph at the PET-cyclotron-radiochemistry site of Messina University

OpenAIRE

Amato, Ernesto; Baldari, Sergio; Tomasello, Francesco

2015-01-01

A PET-cyclotron-radiochemistry plant was built at Messina University Hospital, whose diagnostics section was equipped with a PET-CT scanner composed by a time of flight PET and a 16-slice CT. The present note reports about the results of tomograph's acceptance tests, which had been planned and carried out in order to verify the correspondence of the specific scanner's performances declared by the firm and the fulfillment of Italian law's minimal criteria of acceptability. Acceptance tests...

Electronic transitions and band offsets in C60:SubPc and C60:MgPc on MoO3 studied by modulated surface photovoltage spectroscopy

International Nuclear Information System (INIS)

Fengler, S.; Dittrich, Th.; Rusu, M.

2015-01-01

Electronic transitions at interfaces between MoO 3 layers and organic layers of C 60 , SubPc, MgPc, and nano-composite layers of SubPc:C 60 and MgPc:C 60 have been studied by modulated surface photovoltage (SPV) spectroscopy. For all systems, time dependent and modulated SPV signals pointed to dissociation of excitons at the MoO 3 /organic layer interfaces with a separation of holes towards MoO 3 . The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps (E HL ) of C 60 , SubPc, and MgPc and the effective E HL of SubPc:C 60 and MgPc:C 60 were measured. The offsets between the LUMO (ΔE L ) or HOMO (ΔE H ) bands were obtained with high precision and amounted to 0.33 or 0.73 eV for SubPc:C 60 , respectively, and to −0.33 or 0.67 eV for MgPc:C 60 , respectively. Exponential tails below E HL and most pronounced sub-bandgap transitions were characterized and ascribed to disorder and transitions from HOMO bands to unoccupied defect states

Expedited Synthesis of Fluorine-18 Labeled Phenols. A Missing Link in PET Radiochemistry

Energy Technology Data Exchange (ETDEWEB)

Katzenellenbogen, John A. [Univ. of Illinois, Champaign, IL (United States); Zhou, Dong [Washington Univ., St. Louis, MO (United States)

2015-03-26

Fluorine-18 (F-18) is arguably the most valuable radionuclide for positron emission tomographic (PET) imaging. However, while there are many methods for labeling small molecules with F-18 at aliphatic positions and on electron-deficient aromatic rings, there are essentially no reliable and practical methods to label electron-rich aromatic rings such as phenols, with F-18 at high specific activity. This is disappointing because fluorine-labeled phenols are found in many drugs; there are also many interesting plant metabolites and hormones that contain either phenols or other electron-rich aromatic systems such as indoles whose metabolism, transport, and distribution would be interesting to study if they could readily be labeled with F-18. Most approaches to label phenols with F-18 involve the labeling of electron-poor precursor arenes by nucleophilic aromatic substitution, followed by subsequent conversion to phenols by oxidation or other multi-step sequences that are often inefficient and time consuming. Thus, the lack of good methods for labeling phenols and other electron-rich aromatics with F-18 at high specific activity represents a significant methodological gap in F-18 radiochemistry that can be considered a “Missing Link in PET Radiochemistry”. The objective of this research project was to develop and optimize a series of unusual synthetic transformations that will enable phenols (and other electron-rich aromatic systems) to be labeled with F-18 at high specific activity, rapidly, reliably, and conveniently, thereby bridging this gap. Through the studies conducted with support of this project, we have substantially advanced synthetic methodology for the preparation of fluorophenols. Our progress is presented in detail in the sections below, and much has been published or presented publication; other components are being prepared for publication. In essence, we have developed a completely new method to prepare o-fluorophenols from non-aromatic precursors

Biennial report of Radiochemistry Division 1997-1998

International Nuclear Information System (INIS)

Sastry, M.D.; Manchanda, V.K.; Ramaswami, A.; Goswami, A.; Manohar, S.B.

2000-03-01

This report describes the work carried by Radiochemistry Division of BARC during the period 1997 and 1998. The work is divided in three main branches (1) Nuclear Chemistry (2) Actinides Chemistry (3) Actinide Spectroscopy. During this period research in nuclear chemistry was focussed on nuclear fission, nuclear reactions, neutron activation analysis, use of nuclear techniques for understanding of physico-chemical phenomena and developmental activities in non-destructive assay techniques. The research work on chemistry of actinides was directed on basic as well as applied studies related to complexation and extraction behaviour of actinides and lanthanides with a variety of novel ligands. The choice of complexing ligands was made with a view to examining the suitability in reprocessing streams, treatment of high level active waste and recovery of valuables. The third part spectroscopy of actinides describes the basic studies solid state spectroscopy of actinides and analytical spectroscopy for trace metallic assay. The solid state spectroscopy investigations were carried out using EPR, ENDOR, fluorescence, thermally stimulated luminescence and photo acoustic for spectroscopy techniques. In the analytical spectroscopy work a lot of stress was given on finding suitable chemical separation procedures for pre concentration of trace metals and a determination by ICP-AES/ETA-AAS techniques. (author)

A NICE approach to managing large numbers of desktop PC's

International Nuclear Information System (INIS)

Foster, David

1996-01-01

The problems of managing desktop systems are far from resolved. As we deploy increasing numbers of systems, PC's Mackintoshes and UN*X Workstations. This paper will concentrate on the solution adopted at CERN for the management of the rapidly increasing numbers of desktop PC's in use in all parts of the laboratory. (author)

A study of PC-based ultrasonic goniometer system of surface properties and characterization of materials

Science.gov (United States)

Sani, S.; Saad, M. H. Md; Jamaludin, N.; Ismail, M. P.; Mohd, S.; Mustapha, I.; Masenwat, N. A.; Tengku Amran, T. S.; Megat Ahmad, M. H. A.

2018-01-01

This paper discussed the design and development of a portable PC-based ultrasonic goniometer system that can be used to study material properties using ultrasonic wave. The system utilizes an ultrasonic pulse-receiver card model attached to computer notebook for signal display. A new specific software package (GoNIO) was developed to control the operation of the scanner, displaying the data and analyze characteristics of materials. System testing was carried out using samples with cubic dimension of about 10 mm x 20 mm x 30 mm. This size allows the sample to be fitted into the goniometer specimen holder and immersed in a liquid during measurement. The sample was rotated from incident angle of 0° to 90° during measurement and the amplitude reflected signals were recorded at every one degree of rotation. Immersion transducers were used to generate and receive the ultrasounds that pass through the samples. Longitudinal, shear and Rayleigh wave measurements were performed on the samples to determine the Dynamic Young’s Modulus. Results of measurements are explained and discussed.

The Tilecal/ATLAS detector control system

CERN Document Server

Tomasio Pina, João Antonio

2004-01-01

Tilecal is the barrel hadronic calorimeter of the ATLAS detector that is presently being built at CERN to operate at the LHC accelerator. The main task of the Tilecal detector control system (DCS) is to enable the coherent and safe operation of the detector. All actions initiated by the operator and all errors, warnings, and alarms concerning the hardware of the detector are handled by DCS. The DCS has to continuously monitor all operational parameters, give warnings and alarms concerning the hardware of the detector. The DCS architecture consists of a distributed back-end (BE) system running on PC's and different front-end (FE) systems. The implementation of the BE will he achieved with a commercial supervisory control and data acquisition system (SCADA) and the FE instrumentation will consist on a wide variety of equipment. The connection between the FE and BE is provided by fieldbus or L

A VME-based accumulation, control and supervising system for neutron texture measurements

International Nuclear Information System (INIS)

Kirilov, A.S.; Heinitz, J.; Korobchenko, M.L.; Rezaev, V.E.; Sirotin, A.P.

1997-01-01

Nowadays VME-based systems to control neutron measurement instruments are forcing out those built with PC and CAMAC. One of several alternative solutions is presented here. Its main feature is the implementation of the entire system on the VME site. Both the hardware and the software parts are considered. The instrument can be controlled locally or remotely via local network (even from PCs) with a modern-styled graphical user interface

Evolution of the VLT instrument control system toward industry standards

Science.gov (United States)

Kiekebusch, Mario J.; Chiozzi, Gianluca; Knudstrup, Jens; Popovic, Dan; Zins, Gerard

2010-07-01

The VLT control system is a large distributed system consisting of Linux Workstations providing the high level coordination and interfaces to the users, and VME-based Local Control Units (LCU's) running the VxWorks real-time operating system with commercial and proprietary boards acting as the interface to the instrument functions. After more than 10 years of VLT operations, some of the applied technologies used by the astronomical instruments are being discontinued making it difficult to find adequate hardware for future projects. In order to deal with this obsolescence, the VLT Instrumentation Framework is being extended to adopt well established Commercial Off The Shelf (COTS) components connected through industry standard fieldbuses. This ensures a flexible state of the art hardware configuration for the next generation VLT instruments allowing the access to instrument devices via more compact and simpler control units like PC-based Programmable Logical Controllers (PLC's). It also makes it possible to control devices directly from the Instrument Workstation through a normal Ethernet connection. This paper outlines the requirements that motivated this work, as well as the architecture and the design of the framework extension. In addition, it describes the preliminary results on a use case which is a VLTI visitor instrument used as a pilot project to validate the concepts and the suitability of some COTS products like a PC-based PLCs, EtherCAT8 and OPC UA6 as solutions for instrument control.

PC communication world and Yiyagi 5.3

International Nuclear Information System (INIS)

1992-11-01

This book is comprised of four parts about Yiyagi 5.3. It describes how to use Yiyagi 5.3 : the way to save 5.3 into floppy disk and Hard disk, to store modem, how to communicate with Hitel and PC-serve in the first part, how to use the various function : function key, control key, alt key, text editor of Yiyagi 5.3 and mouse in the second part, to be good at using communication : Modem, screen control, RS-232C and Null Modem, script and Multitasking in the third part. It has an appendix about compression and decompression of file, BBS list, PC application such as VGA graphic, UNIX/ XENIX and DOS, RS-232C and Modem and GR.exe.

Development of personnel dose control system and whole body counter system

International Nuclear Information System (INIS)

Ooki, Yasushi; Harato, Kenji

2005-01-01

We delivered Personnel Dose Control System to Higashidohri nuclear plant of Tohoku Electric Power Company, in November 2004. In this system development, we automated the registration of radiation worker with close link between this system and Whole Body Counter System. In addition, this system enables the user to reduce workload for accumulation and notification of personal exposure data, because we adopted the system to extract the data effectively operating the terminal PC which the associate company gets ready in their office. We also delivered Whole body Counter System in December 2004, which was developed to measure internal exposure without feeling of oppression in chair-style device for the first time in Japan. This system enables non-operator system for measurement allowing workers to operate by themselves. (author)

Conception and syllabus on radiochemistry and radioecology principles for general student groups of a university chemical department

International Nuclear Information System (INIS)

Bogdanov, R.V.

1994-01-01

The problem of basic principles of selecting materials for general courses on diverse subjects in chemical science is discussed. Relying on certain general rules and proceeding from specificity of radiochemistry, the author suggests a variant of syllabus including radiochemical and radioecological blocks intented for 48 academic hours. In methodical respect emphasis is made on theoretical material presentation in close combination with various nuclear methods used in chemical studies. 6 refs., 1 fig

Development of remote control integrator system on Tokamak

International Nuclear Information System (INIS)

Wu Yichun; Wang Lingzhi; Shu Shuangbao

2014-01-01

In order to meet with the requirement of electromagnetic diagnosis to the J-TEXT Tokamak, a remote control integrator system was developed. With modular design method, the integrator system is composed of the integrator cards, a control card, a linear power card and the BNC interface cards, and it uses the PC control soft- ware to conduct network control. An integrator system provides 32 integrator channels, and all integral channels have four kinds of integral time constants for remote selection and provide three kinds of integrator running control methods. According to laboratory and J-TEXT field testing, it shows that the output voltage range is -10-10 V, output noise is not more than 5 mV, and for the four kinds of integral time constants, the integral output drifts are all less than 5 mV within 100 s for each integrator channel. (authors)

Laboratory process control using natural language commands from a personal computer

Science.gov (United States)

Will, Herbert A.; Mackin, Michael A.

1989-01-01

PC software is described which provides flexible natural language process control capability with an IBM PC or compatible machine. Hardware requirements include the PC, and suitable hardware interfaces to all controlled devices. Software required includes the Microsoft Disk Operating System (MS-DOS) operating system, a PC-based FORTRAN-77 compiler, and user-written device drivers. Instructions for use of the software are given as well as a description of an application of the system.

The present status and prospects for the development of radiochemistry and nuclear chemistry in Poland

International Nuclear Information System (INIS)

Narbutt, J.; Chmielewski, A.G.

2001-01-01

The report deals with a short history, achievements and trends of development of radiochemistry and nuclear chemistry in the world. It also presents the main achievements and short programmes of fundamental and applied research, as well as works on technology, as delivered by more than thirty research institutes and universities in Poland. The related teaching activities of Polish academic centers has been briefly discussed. The documents enclosed [list of publications (1997-2000; list of research groups; list of apparatus] bring a more detailed representation of the Polish research centers' activity in this field. (author)

Radiochemistry Institute of Karlsruhe Nuclear Research Centre. Progress report on R and D work in 1985

International Nuclear Information System (INIS)

1986-02-01

The Radiochemistry Institute carried out R and D work within the framework of the following projects: Project PWA, Reprocessing and Waste Treatment; project PSB, Fast Breeder Reactor; project PKF, Nuclear Fusion. Basic and applied problems in the field of surface chemistry and surface analysis were studied under the working programme 'Solids and Materials Research', and 'Technology - Man - Environment' was a point of main interest that gathered a number of working programmes in the field of water chemistry. (orig./RB) [de

A PC-based Flexible Solution for Virtual Instrumentation of a Multi-Purpose Test Bed

Directory of Open Access Journals (Sweden)

Benatzky Christian

2006-11-01

Full Text Available The aim of the paper is to give an overview of a test bed set up for lightweight flexible structures. The purpose of the test bed is to compare different concepts for suppressing structural vibrations. It is demonstrated that such a complex measurement and actuation task can be easily implemented on a single PC using standard software like Matlab/SIMULINK® with a minimum of custom hardware. With the help of this PC standard engineering tasks like measuring, identification of transfer functions, as well as controller design and implementation in soft real-time can be carried out easily (rapid prototyping. The resulting system is flexible and scalable, enabling an engineer to perform all the above mentioned tasks for a given test object within minimum time. Additionally, the utilization of Matlab/SIMULINK® facilitates the realization of a versatile virtual instrumentation system which is easy to use and may also be remote-controlled.

Radioimmunoassay data processing program for IBM PC computers

International Nuclear Information System (INIS)

1989-06-01

The Medical Applications Section of the International Atomic Energy Agency (IAEA) has previously developed several programs for use on the Hewlett-Packard HP-41C programmable calculator to facilitate better quality control in radioimmunoassay through improved data processing. The program described in this document is designed for off-line analysis using an IBM PC (or compatible) for counting data from standards and unknown specimens (i.e. for analysis of counting data previously recorded by a counter), together with internal quality control (IQC) data both within and between batch. The greater computing power of the IBM PC has enabled the imprecision profile and IQC control curves which were unavailable on the HP-41C version. It is intended that the program would make available good data processing capability to laboratories having limited financial resources and serious problems of quality control. 3 refs

PC Scene Generation

Science.gov (United States)

Buford, James A., Jr.; Cosby, David; Bunfield, Dennis H.; Mayhall, Anthony J.; Trimble, Darian E.

2007-04-01

AMRDEC has successfully tested hardware and software for Real-Time Scene Generation for IR and SAL Sensors on COTS PC based hardware and video cards. AMRDEC personnel worked with nVidia and Concurrent Computer Corporation to develop a Scene Generation system capable of frame rates of at least 120Hz while frame locked to an external source (such as a missile seeker) with no dropped frames. Latency measurements and image validation were performed using COTS and in-house developed hardware and software. Software for the Scene Generation system was developed using OpenSceneGraph.

Maximum power point tracking controller for PV systems using neural networks

Energy Technology Data Exchange (ETDEWEB)

Bahgat, A.B.G. [Cairo Univ. (Egypt). Faculty of Engineering; Helwa, N.H.; Ahmad, G.E.; El Shenawy, E.T. [National Research Center, Dokki, Cairo (Egypt). Solar Energy Dept.

2005-07-01

This paper presents a development and implementation of a PC-based maximum power point tracker (MPPT) for PV system using neural networks (NN). The system consists of a PV module via a MPPT supplying a dc motor that drives an air fan. The control algorithm is developed to use the artificial NN for detecting the optimal operating point under different operating conditions, then the control action gives the driving signals to the MPPT. A PC is used for data acquisition, running the control algorithm, data storage, as well as data display and analysis. The system has been implemented and tested under various operating conditions. The experimental results showed that the PV system with MPPT always tracks the peak power point of the PV module under various operating conditions. The MPPT transmits about 97% of the actual maximum power generated by the PV module. The MPPT not only increases the power from the PV module to the load, but also maintains longer operating periods for the PV system. The air velocity and the air mass flow rate of the mechanical load are increased considerably, due to the increase of the PV system power. It is also found that the increase in the output energy due to using the MPPT is about 45.2% for a clear sunny day. (Author)

Cyber secure systems approach for NPP digital control systems

Energy Technology Data Exchange (ETDEWEB)

McCreary, T. J.; Hsu, A. [HF Controls Corporation, 16650 Westgrove Drive, Addison, TX 75001 (United States)

2006-07-01

an intruder attempting to disrupt network communications by entering the system from an attached utility network or utilizing a modem connected to a control system PC that is in turn connected to a publicly accessible phone; 2)Threat from a user connecting an unauthorized computer to the control network; 3)Threat from a security attack when an unauthorized user gains access to a PC connected to the plant network;. 4)Threat from internal disruption (by plant staff, whether, malicious or otherwise) by unauthorized usage of files or file handling media that opens the system to security threat (as typified in current situation in most control rooms). The plant I and C system cyber security design and the plant specific procedures should adequately demonstrate protection from the four pertinent classes of cyber security attacks. The combination of these features should demonstrate that the system is not vulnerable to any analyzed cyber security attacks either from internal sources or through network connections. The authors will provide configurations that will demonstrate the Cyber Security Zone. (authors)

Cyber secure systems approach for NPP digital control systems

International Nuclear Information System (INIS)

McCreary, T. J.; Hsu, A.

2006-01-01

disrupt network communications by entering the system from an attached utility network or utilizing a modem connected to a control system PC that is in turn connected to a publicly accessible phone; 2)Threat from a user connecting an unauthorized computer to the control network; 3)Threat from a security attack when an unauthorized user gains access to a PC connected to the plant network;. 4)Threat from internal disruption (by plant staff, whether, malicious or otherwise) by unauthorized usage of files or file handling media that opens the system to security threat (as typified in current situation in most control rooms). The plant I and C system cyber security design and the plant specific procedures should adequately demonstrate protection from the four pertinent classes of cyber security attacks. The combination of these features should demonstrate that the system is not vulnerable to any analyzed cyber security attacks either from internal sources or through network connections. The authors will provide configurations that will demonstrate the Cyber Security Zone. (authors)

Activities to foster training in nuclear and radiochemistry from IACS, IAEA-Vienna

International Nuclear Information System (INIS)

Rossbach, M.; Narasimhan, D.V.S.; Chmielewski, A.; Einav, I.; Thereska, J.; Haji-Saeid, M.

2005-01-01

Uses of radioisotopes and radiation in medicine, industry, agriculture are amongst the most beneficial applications of atomic energy for peaceful purposes. The International Atomic Energy Agency aims - in accordance with its statute - to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world. The various Technical Divisions of the Agency carry out this mandate and enhance, particularly through 'manpower development activities' the nuclear applications of radiation and isotopes. Staff members of the 'Industrial Applications and Chemistry Section' in the Department of Nuclear Sciences and Applications of the IAEA have supported more than 600 trainees per year for education in nuclear and radiochemistry through fellowships, training courses and workshops. Provision of printed material in various disciplines is supporting our educational efforts. (author)

File list: InP.Prs.50.AllAg.PC-3 [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Prs.50.AllAg.PC-3 hg19 Input control Prostate PC-3 SRX539667,SRX084520,SRX43319...9,SRX433195,SRX1021636,SRX1021637,SRX181768,SRX540851 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.Prs.50.AllAg.PC-3.bed ...

Didactic System for the Experimental Study of Digital PID Control Structures

Directory of Open Access Journals (Sweden)

Stelian-Emilian OLTEAN

2016-12-01

Full Text Available The proportional integral derivative (PID controller has a known structure used in feedback control of industrial processes. One of the most common applications is the control of the DC motor. The paper presents a didactic system designed for educational purposes used for studying various conventional PID structures and the influence of the PID components in the control process of the DC motor’s speed. The system contains a low cost acquisition board based on PIC 16F628A microcontroller. The experimental results are shown graphically using a PC application made in Matlab environment.

162.5 MHz digital low-level radio frequency control monitoring system design and implementation

International Nuclear Information System (INIS)

Zhang Ruifeng; Wang Xianwu; Xu Zhe; Yi Xiaoping

2014-01-01

162.5 MHz high-frequency low-level control system self-developed by Institute of Modern Physics for ADS project took digital technology. All parameters' reading and writing, including loop parameter setting, open and close-loop operation, and condition monitoring, were achieved through the monitoring system. The system used lightweight client-server working mode that client running in the PC sent command data, server running on high-frequency digital low level system responded instructions to complete parameter monitoring and control. The system consisted of three parts. Firstly, server hardware system was constructed based on Atera Stratix Ⅲ family of field-programmable gate array (FPGA) development board. Secondly, the server software system was designed based on Micro C/OS Ⅱ real-time operating systems and lightweight TCP/IP protocol stack, and finally a client PC program was designed based on MFC. After a long test, it was indicated that the monitoring system works properly and stably. TCP sends and receives throughput reached 11.931038 Mbps and 8.117624 Mbps. (authors)

Man machine interaction for operator information systems : a general purpose display package on PC/AT

International Nuclear Information System (INIS)

Chandra, A.K.; Dubey, B.P.; Deshpande, S.V.; Vaidya, U.W.; Khandekar, A.B.

1991-01-01

Several operator information systems for nuclear plants have been developed at Reactor Control Division of BARC and these have involved extensive operator interaction to extract the maximum information from the systems. Each of these systems used a different scheme for operator interaction. A composite package has now been developed on PC/AT with EGA/VGA for use with any system to obviate the necessity to develop new software for each project. This permits information to be displayed in various formats viz. trend and history curves, tabular data, bar graphs and core matrix (both for 235 and 500 MWe cores). It also allows data to be printed and plotted using multi colour plotter. This package thus integrates all the features of the earlier systems. It also integrates the operator interaction scheme. It uses window based pull down menus to select parameters to be fed into a particular display format. Within any display format the operator has significant flexibility to modify the selected parameters using context dependent soft keys. The package also allows data to be retrieved in machine readable form. This report describes the various user friendly functions implemented and also the design of the system software. (author). 1 tab., 10 fig., 3 refs

Design and Development of a Control System for Nanofiber Electrospinning

Directory of Open Access Journals (Sweden)

Dayat Kurniawan

2013-11-01

Full Text Available This paper describes the development of a control hardware and software for a nano-fiber electro-spinning system. The hardware consists of motor driver boards, a high DC voltage board, and a main control board. The user interface software on PC is developed using Visual Studio C # 2010 express edition. The motor driver boards are controlled by an ATmega8 microcontroller IC, while the main board is controlled by an ATmega 128 microcontroller IC. Communication between the main board and the motor driver boards uses the inter integrated circuit (I2C, while communication between PC and the main board uses a serial communication at a baud rate of 9,600 bps. The high DC voltage generator is designed to have an output of 0-25 kV. High DC voltage output is configurable by giving a combination of low logic and high impedance into a six bit input. The result show that maximum output of high DC voltage is 25.025 kV with formula of curve is y = 1x – 0.0244 with R2 = 0.9998 and PC software interface can work very well. Polymer flow rate can be configured from PC interface software via I2C connected to the main board. The flow rate y follows the RPM setting x, according to the formula y = 0.954x – 0.0099 with R2 = 1. The results of scanning electron microscope (SEM for morphology analysis of PVDF copolymer composite nano-fiber shows that the average diameter of the resulted fiber is 136.43 nm, when output high DC voltage is set to 15 kV and speed of syringe pump is set to 5 RPM.  

A PC-based signal validation system for nuclear power plants

International Nuclear Information System (INIS)

Erbay, A.S.; Upadhyaya, B.R.; Seker, S.

1998-01-01

In order to achieve the desired operating configuration in any process, the system conditions must be measured accurately. Examples of measurements are temperature, pressure, flow, level, motor current, vibration, etc. However, in order to operate within desired limits, it is important to know the reliability of plant measurements. Signal validation (SV) deals with this issue, and is defined as the detection, isolation and characterization of faulty signals. Also referred to as fault detection, signal validation checks inconsistencies among redundant measurements and estimates their expected values using other measurements and system models. The benefits of SV are both economic and safety related. Catastrophic signal failure can result in plant shutdown and lost revenue. Pre-catastrophic failure detection would therefore minimize plant downtime and increase plant availability. The control action taken depends primarily upon the information provided by the plant instruments. Thus, increased plant productivity and increased reliability of operator actions, would result from the implementation of such a system. The purpose of this study is to investigate some of the existing signal validation methods by incremental improvements and to develop new modules. Each of the SV modules performs a specific task. The architecture consists of four modules, an information base and a system executive integrated with a graphical user interface (GUI). All the modules are used for validation during both steady-state and transient operating conditions. The entire system was developed in the PC-framework under Microsoft Windows TM . Some improvements were made in the structure of static data-driven models by incorporating one and two-step regression. Kalman filtering is based on the use of a physical model of plant components and was implemented for a steam generator system in a nuclear power plant. This is applicable to both steady-state and transient operations. The system executive

Development of patient-controlled respiratory gating system based on visual guidance for magnetic-resonance image-guided radiation therapy.

Science.gov (United States)

Kim, Jung-In; Lee, Hanyoung; Wu, Hong-Gyun; Chie, Eui Kyu; Kang, Hyun-Cheol; Park, Jong Min

2017-09-01

The aim of this study is to develop a visual guidance patient-controlled (VG-PC) respiratory gating system for respiratory-gated magnetic-resonance image-guided radiation therapy (MR-IGRT) and to evaluate the performance of the developed system. The near-real-time cine planar MR image of a patient acquired during treatment was transmitted to a beam projector in the treatment room through an optical fiber cable. The beam projector projected the cine MR images inside the bore of the ViewRay system in order to be visible to a patient during treatment. With this visual information, patients voluntarily controlled their respiration to put the target volume into the gating boundary (gating window). The effect of the presence of the beam projector in the treatment room on the image quality of the MRI was investigated by evaluating the signal-to-noise ratio (SNR), uniformity, low-contrast detectability, high-contrast spatial resolution, and spatial integrity with the VG-PC gating system. To evaluate the performance of the developed system, we applied the VG-PC gating system to a total of seven patients; six patients received stereotactic ablative radiotherapy (SABR) and one patient received conventional fractionated radiation therapy. The projected cine MR images were visible even when the room light was on. No image data loss or additional time delay during delivery of image data were observed. Every indicator representing MRI quality, including SNR, uniformity, low-contrast detectability, high-contrast spatial resolution, and spatial integrity exhibited values higher than the tolerance levels of the manufacturer with the VG-PC gating system; therefore, the presence of the VG-PC gating system in the treatment room did not degrade the MR image quality. The average beam-off times due to respiratory gating with and without the VG-PC gating system were 830.3 ± 278.2 s and 1264.2 ± 302.1 s respectively (P = 0.005). Consequently, the total treatment times excluding

General specifications for the development of a PC-based simulator of the NASA RECON system

Science.gov (United States)

Dominick, Wayne D. (Editor); Triantafyllopoulos, Spiros

1984-01-01

The general specifications for the design and implementation of an IBM PC/XT-based simulator of the NASA RECON system, including record designs, file structure designs, command language analysis, program design issues, error recovery considerations, and usage monitoring facilities are discussed. Once implemented, such a simulator will be utilized to evaluate the effectiveness of simulated information system access in addition to actual system usage as part of the total educational programs being developed within the NASA contract.

Performance Evaluation of a Multipurpose Bare PC Gateway

DEFF Research Database (Denmark)

Tsetse, Anthony; Appiah-Kubi, Patrick; Loukili, Alae

2015-01-01

. Different solutions (6to4 tunneling, IVI translation, NAT64, DNS64 etc.), have being proposed but these are all standalone systems. In this paper we discuss the design,implementation and performance evaluation of a multipurpose Bare PC Gateway which incorporates Network Address translation (NAT), 6to4...... results indicate a relatively better performance (18%-45%) of the Bare PC gateway compared to a Linux gateway (running the functionalities as standalone systems). We believe the proposed solution could easily scale to wide area networks and also provide a cost efficient solution...

METHANE de-NOX for Utility PC Boilers

Energy Technology Data Exchange (ETDEWEB)

Bruce Bryan; Serguei Nester; Joseph Rabovitser; Stan Wohadlo

2005-09-30

The overall project objective is the development and validation of an innovative combustion system, based on a novel coal preheating concept prior to combustion, that can reduce NO{sub x} emissions to 0.15 lb/million Btu or less on utility pulverized coal (PC) boilers. This NO{sub x} reduction should be achieved without loss of boiler efficiency or operating stability, and at more than 25% lower levelized cost than state-of-the-art SCR technology. A further objective is to ready technology for full-scale commercial deployment to meet the market demand for NO{sub x} reduction technologies. Over half of the electric power generated in the U.S. is produced by coal combustion, and more than 80% of these units utilize PC combustion technology. Conventional measures for NOx reduction in PC combustion processes rely on combustion and post-combustion modifications. A variety of combustion-based NO{sub x} reduction technologies are in use today, including low-NO{sub x} burners (LNBs), flue gas recirculation (FGR), air staging, and natural gas or other fuel reburning. Selective non-catalytic reduction (SNCR) and selective catalytic reduction (SCR) are post-combustion techniques. NO{sub x} reduction effectiveness from these technologies ranges from 30 to 60% and up to 90-93% for SCR. Typically, older wall-fired PC burner units produce NO{sub x} emissions in the range of 0.8-1.6 lb/million Btu. Low-NO{sub x} burner systems, using combinations of fuel staging within the burner and air staging by introduction of overfire air in the boiler, can reduce NO{sub x} emissions by 50-60%. This approach alone is not sufficient to meet the desired 0.15 lb/million Btu NO{sub x} standard with a range of coals and boiler loads. Furthermore, the heavy reliance on overfire air can lead to increased slagging and corrosion in furnaces, particularly with higher-sulfur coals, when LNBs are operated at sub-stoichiometric conditions to reduce fuel-derived NOx in the flame. Therefore, it is desirable

Telescope Array Control System Based on Wireless Touch Screen Platform

Science.gov (United States)

Fu, Xia-nan; Huang, Lei; Wei, Jian-yan

2017-10-01

Ground-based Wide Angle Cameras (GMAC) are the ground-based observational facility for the SVOM (Space Variable Object Monitor) astronomical satellite of Sino-French cooperation, and Mini-GWAC is the pathfinder and supplement of GWAC. In the context of the Mini-GWAC telescope array, this paper introduces the design and implementation of a kind of telescope array control system based on the wireless touch screen platform. We describe the development and implementation of the system in detail in terms of control system principle, system hardware structure, software design, experiment, and test etc. The system uses a touch-control PC which is based on the Windows CE system as the upper computer, while the wireless transceiver module and PLC (Programmable Logic Controller) are taken as the system kernel. It has the advantages of low cost, reliable data transmission, and simple operation. And the control system has been applied to the Mini-GWAC successfully.

The family house control system based on Raspberry Pi

Directory of Open Access Journals (Sweden)

Sysala Tomas

2017-01-01

Full Text Available The article deals with the design and implementation of a smart household based on simple wireless modules, which are monitoring (collecting data and controlling smart household supporting devices. The central unit processes measured parameters, and in relation to resulting values, a pre-set action is performed. Those actions variety can be configured by user via the user interface so that a set of smart rules for reaction on by household devices generated stimuli or problems can be created. That all together composes a control system based on Raspberry Pi, which manages indoor and outdoor temperature measurement, the lighting control, RF transmitter, jalousie, motion sensor control etc. There is a GUI for a PC and for a mobile phone as a part of that system.

Development of an Adaptive Forecasting System: A Case Study of a PC Manufacturer in South Korea

Directory of Open Access Journals (Sweden)

Chihyun Jung

2016-03-01

Full Text Available We present a case study of the development of an adaptive forecasting system for a leading personal computer (PC manufacturer in South Korea. It is widely accepted that demand forecasting for products with short product life cycles (PLCs is difficult, and the PLC of a PC is generally very short. The firm has various types of products, and the volatile demand patterns differ by product. Moreover, we found that different departments have different requirements when it comes to the accuracy, point-of-time and range of the forecasts. We divide the demand forecasting process into three stages depending on the requirements and purposes. The systematic forecasting process is then introduced to improve the accuracy of demand forecasting and to meet the department-specific requirements. Moreover, a newly devised short-term forecasting method is presented, which utilizes the long-term forecasting results of the preceding stages. We evaluate our systematic forecasting methods based on actual sales data from the PC manufacturer, where our forecasting methods have been implemented.

PC12 polarity on biopolymer nanogratings

International Nuclear Information System (INIS)

Cecchini, M; Ferrari, A; Beltram, F

2008-01-01

Cell differentiation properties are strongly entangled with the morphology and physical properties of the extracellular environment. A complete understanding of this interaction needs artificial scaffolds with controlled nano-/micro-topography. We induced specific topographies by nanoimprint lithography (NIL) on tissue culture polystyrene (TCPS) dishes substrates and, using light microscopy and high-magnification scanning-electron-microscopy, quantitatively compared the changes in PC12 differentiation phenotype induced by the periodicity of the nanopatterns. This analysis revealed that nanogratings reduce the number of neurites produced by PC12 cells upon treatment with NGF and that neuronal bipolarity correlated with an increased stretching of the cell body and a reduced length of the cell neuronal protrusions

ELIPGRID-PC: Upgraded version

International Nuclear Information System (INIS)

Davidson, J.R.

1995-12-01

Evaluating the need for and the effectiveness of remedial cleanup at waste sites often includes finding average contaminant concentrations and identifying pockets of contamination called hot spots. The standard tool for calculating the probability of detecting pockets of contamination called hot spots has been the ELIPGRID code of singer and Wickman. The ELIPGRID-PC program has recently made this algorithm available for an IBM reg-sign personal computer (PC) or compatible. A new version of ELIPGRID-PC, incorporating Monte Carlo test results and simple graphics, is herein described. Various examples of how to use the program for both single and multiple hot spot cases are given. The code for an American National Standards Institute C version of the ELIPGRID algorithm is provided, and limitations and further work are noted. This version of ELIPGRID-PC reliably meets the goal of moving Singer's ELIPGRID algorithm to the PC

Aspartame-induced apoptosis in PC12 cells

OpenAIRE

Horio, Yukari; Sun, Yongkun; Liu, Chuang; Saito, Takeshi; Kurasaki, Masaaki

2014-01-01

Aspartame is an artificial sweetner added to many low-calorie foods. The safety of aspartame remains controversial even though there are many studies on its risks. In this study, to understand the physiological effects of trace amounts of artificial sweetners on cells, the effects of aspartame on apoptosis were investigated using a PC12 cell system. In addition, the mechanism of apoptosis induced by aspartame in PC12 cells and effects on apoptotic factors such as cytochrome c, apoptosis-induc...

Real-time tracking control of electro-hydraulic force servo systems using offline feedback control and adaptive control.

Science.gov (United States)

Shen, Gang; Zhu, Zhencai; Zhao, Jinsong; Zhu, Weidong; Tang, Yu; Li, Xiang

2017-03-01

This paper focuses on an application of an electro-hydraulic force tracking controller combined with an offline designed feedback controller (ODFC) and an online adaptive compensator in order to improve force tracking performance of an electro-hydraulic force servo system (EHFS). A proportional-integral controller has been employed and a parameter-based force closed-loop transfer function of the EHFS is identified by a continuous system identification algorithm. By taking the identified system model as a nominal plant model, an H ∞ offline design method is employed to establish an optimized feedback controller with consideration of the performance, control efforts, and robustness of the EHFS. In order to overcome the disadvantage of the offline designed controller and cope with the varying dynamics of the EHFS, an online adaptive compensator with a normalized least-mean-square algorithm is cascaded to the force closed-loop system of the EHFS compensated by the ODFC. Some comparative experiments are carried out on a real-time EHFS using an xPC rapid prototype technology, and the proposed controller yields a better force tracking performance improvement. Copyright © 2016. Published by Elsevier Ltd.

Preparation of high purity plutonium oxide for radiochemistry instrument calibration standards and working standards

International Nuclear Information System (INIS)

Wong, A.S.; Stalnaker, N.D.

1997-04-01

Due to the lack of suitable high level National Institute of Standards and Technology (NIST) traceable plutonium solution standards from the NIST or commercial vendors, the CST-8 Radiochemistry team at Los Alamos National Laboratory (LANL) has prepared instrument calibration standards and working standards from a well-characterized plutonium oxide. All the aliquoting steps were performed gravimetrically. When a 241 Am standardized solution obtained from a commercial vendor was compared to these calibration solutions, the results agreed to within 0.04% for the total alpha activity. The aliquots of the plutonium standard solutions and dilutions were sealed in glass ampules for long term storage

Simulink-aided Design and Implementation of Sensorless BLDC Motor Digital Control System

Science.gov (United States)

Zhilenkov, A. A.; Tsvetkov, Y. N.; Chistov, V. B.; Nyrkov, A. P.; Sokolov, S. S.

2017-07-01

The paper describes the process of creating of brushless direct current motor’s digital control system. The target motor has no speed sensor, so back-EMF method is used for commutation control. Authors show how to model the control system in MatLab/Simulink and to test it onboard STM32F4 microcontroller.This technology allows to create the most flexible system, which will control possible with a personal computer by communication lines. It is possible to examine the signals in the circuit of the actuator without any external measuring instruments - testers, oscilloscopes, etc. - and output waveforms and measured values of signals directly on the host PC.

A database system for the control of radioactive effluents generated by the IPEN-CNEN/SP installations

International Nuclear Information System (INIS)

Maduar, M.F.

1992-01-01

A PC-compatible database system has been developed in order to optimize the control of liquid and gaseous effluents generated by the installations of IPEN-CNEN/SP. The system implements source-term generation, optimizes the discharge control of the effluents and allows several ways for the retrieval of data concerning to the effluents. (author)

Hacking control systems, switching lights off!

CERN Multimedia

Computer Security Team

2013-01-01

Have you ever heard about “Stuxnet”? “Stuxnet” was a very sophisticated cyber-attack against the Iranian nuclear programme. Like in a spy movie, the attackers infiltrated the uranium enrichment plant at Natanz, arranged for infected USB sticks to be inserted into local PCs, and then the USB viruses did the rest.   Not only did the virus employ four distinct - so far unknown - weaknesses in the Windows operating system, but each weakness could have been sold on the underground market for up to $250,000 each. The virus was targeted to disrupt Iran's uranium production. At first, it scanned the infected PCs for dedicated SCADA (Supervisory Control and Data Acquisition) software from Siemens. Once the virus hit upon that software, it tried to identify any control system components, i.e. so-called PLCs (programmable logic controllers), attached to that PC. If the PLC matched a certain brand (Siemens S7) and configuration, the virus downloaded additi...

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

Science.gov (United States)

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

Practical Pocket PC Application w/Biometric Security

Science.gov (United States)

Logan, Julian

2004-01-01

I work in the Flight Software Engineering Branch, where we provide design and development of embedded real-time software applications for flight and supporting ground systems to support the NASA Aeronautics and Space Programs. In addition, this branch evaluates, develops and implements new technologies for embedded real-time systems, and maintains a laboratory for applications of embedded technology. The majority of microchips that are used in modern society have been programmed using embedded technology. These small chips can be found in microwaves, calculators, home security systems, cell phones and more. My assignment this summer entails working with an iPAQ HP 5500 Pocket PC. This top-of-the-line hand-held device is one of the first mobile PC's to introduce biometric security capabilities. Biometric security, in this case a fingerprint authentication system, is on the edge of technology as far as securing information. The benefits of fingerprint authentication are enormous. The most significant of them are that it is extremely difficult to reproduce someone else's fingerprint, and it is equally difficult to lose or forget your own fingerprint as opposed to a password or pin number. One of my goals for this summer is to integrate this technology with another Pocket PC application. The second task for the summer is to develop a simple application that provides an Astronaut EVA (Extravehicular Activity) Log Book capability. The Astronaut EVA Log Book is what an astronaut would use to report the status of field missions, crew physical health, successes, future plans, etc. My goal is to develop a user interface into which these data fields can be entered and stored. The applications that I am developing are created using eMbedded Visual C++ 4.0 with the Pocket PC 2003 Software Development Kit provided by Microsoft.

The new control system of the SPS target sector

CERN Document Server

Carlier, E; Mecredy, N; O'Leary, J

1999-01-01

The SPS, the Super Proton Synchrotron at CERN, is an accelerator originally designed and commissioned in 1976 for protons. The control system of the SPS target stations, beam absorbers and other aperture limiting devices was developed in the seventies. It was mainly based on home made electronics and equipment dependent software. With time, this electronics has become obsolete, difficult to maintain in operation and not suitable for integration into a modern control system. In 1997, a project was set up to modernise the electronics and the related software. The new control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment controllers and connected through PROFIBUS to a Windows-NT front-end PC running the SIEMENS WinCC SCADA package which acts as local controller and remote access gateway. This fully industrial solution has been successfully integrated into the actual SPS accelerator control infrast...

Design of Sail-Assisted Unmanned Surface Vehicle Intelligent Control System

OpenAIRE

Ma, Yong; Zhao, Yujiao; Diao, Jiantao; Gan, Langxiong; Bi, Huaxiong; Zhao, Jingming

2016-01-01

To achieve the wind sail-assisted function of the unmanned surface vehicle (USV), this work focuses on the design problems of the sail-assisted USV intelligent control systems (SUICS) and illustrates the implementation process of the SUICS. The SUICS consists of the communication system, the sensor system, the PC platform, and the lower machine platform. To make full use of the wind energy, in the SUICS, we propose the sail angle of attack automatic adjustment (Sail_4A) algorithm and present ...

Reuse of the compact nuclear simulator software under PC with Linux

International Nuclear Information System (INIS)

Cha, K. H.; Park, J. C.; Kwon, K. C.; Lee, G. Y.

2000-01-01

This study was approached to reuse source programs for a nuclear simulator under PC with Open Source Software(OSS) and to extend its applicability. Source programs in the Compact Nuclear Simulator(CNS), which has been operated for institutional research and training in KAERI, were reused and implemented for Linux-PC environment with the aim of supporting the study. PC with 500 MHz processor and Linux 2.2.5-22 kernel were utilized for the reuse implementation and it was investigated for some applications, through the functional testing for its main functions as interfaced with compact control panels in the current CNS. Development and upgrade of small-scale simulators, establishment of process simulation for PC, and development of prototype predictive simulation, can effectively be enabled with the experience though the reuse implementation was limited to port only CNS programs for PC with Linux

Physical and Mechanical Characteristics of Kevlar Fiber-Reinforced PC/ABS Composites

Directory of Open Access Journals (Sweden)

Kuljira Sujirote

2012-01-01

Full Text Available In this research, the composites between polycarbonate (PC and acrylonitrile-butadiene-styrene (ABS alloy and Kevlar fiber were prepared. The flexural and tensile properties of PC/ABS alloy and its composites were determined using a universal testing machine. The synergistic behavior of flexural modulus was observed for all regions of PC contents, while the synergism of flexural strength and tensile strength were found in some PC contents. It was found that the optimum weight ratio of PC:ABS was 60:40. In the Kevlar Fiber-reinforced PC/ABS composite system at PC:ABS of 60:40, both flexural modulus and strength were increased with matrix contents. Additionally, the flexural strength drastically increased with the matrix content and then reached the maximum value of 167 MPa at the matrix content of 33.4 wt%. The results from peel test, water contact measurement, and scanning electron microscopy (SEM reveal that the interfacial adhesion between the Kevlar fiber and the polymer matrix could be improved by increasing the PC content in the matrix.

Testing on a Large Scale Running the ATLAS Data Acquisition and High Level Trigger Software on 700 PC Nodes

CERN Document Server

Burckhart-Chromek, Doris; Adragna, P; Alexandrov, L; Amorim, A; Armstrong, S; Badescu, E; Baines, J T M; Barros, N; Beck, H P; Bee, C; Blair, R; Bogaerts, J A C; Bold, T; Bosman, M; Caprini, M; Caramarcu, C; Ciobotaru, M; Comune, G; Corso-Radu, A; Cranfield, R; Crone, G; Dawson, J; Della Pietra, M; Di Mattia, A; Dobinson, Robert W; Dobson, M; Dos Anjos, A; Dotti, A; Drake, G; Ellis, Nick; Ermoline, Y; Ertorer, E; Falciano, S; Ferrari, R; Ferrer, M L; Francis, D; Gadomski, S; Gameiro, S; Garitaonandia, H; Gaudio, G; George, S; Gesualdi-Mello, A; Gorini, B; Green, B; Haas, S; Haberichter, W N; Hadavand, H; Haeberli, C; Haller, J; Hansen, J; Hauser, R; Hillier, S J; Höcker, A; Hughes-Jones, R E; Joos, M; Kazarov, A; Kieft, G; Klous, S; Kohno, T; Kolos, S; Korcyl, K; Kordas, K; Kotov, V; Kugel, A; Landon, M; Lankford, A; Leahu, L; Leahu, M; Lehmann-Miotto, G; Le Vine, M J; Liu, W; Maeno, T; Männer, R; Mapelli, L; Martin, B; Masik, J; McLaren, R; Meessen, C; Meirosu, C; Mineev, M; Misiejuk, A; Morettini, P; Mornacchi, G; Müller, M; Garcia-Murillo, R; Nagasaka, Y; Negri, A; Padilla, C; Pasqualucci, E; Pauly, T; Perera, V; Petersen, J; Pope, B; Albuquerque-Portes, M; Pretzl, K; Prigent, D; Roda, C; Ryabov, Yu; Salvatore, D; Schiavi, C; Schlereth, J L; Scholtes, I; Sole-Segura, E; Seixas, M; Sloper, J; Soloviev, I; Spiwoks, R; Stamen, R; Stancu, S; Strong, S; Sushkov, S; Szymocha, T; Tapprogge, S; Teixeira-Dias, P; Torres, R; Touchard, F; Tremblet, L; Ünel, G; Van Wasen, J; Vandelli, W; Vaz-Gil-Lopes, L; Vermeulen, J C; von der Schmitt, H; Wengler, T; Werner, P; Wheeler, S; Wickens, F; Wiedenmann, W; Wiesmann, M; Wu, X; Yasu, Y; Yu, M; Zema, F; Zobernig, H; Computing In High Energy and Nuclear Physics

2006-01-01

The ATLAS Data Acquisition (DAQ) and High Level Trigger (HLT) software system will be comprised initially of 2000 PC nodes which take part in the control, event readout, second level trigger and event filter operations. This high number of PCs will only be purchased before data taking in 2007. The large CERN IT LXBATCH facility provided the opportunity to run in July 2005 online functionality tests over a period of 5 weeks on a stepwise increasing farm size from 100 up to 700 PC dual nodes. The interplay between the control and monitoring software with the event readout, event building and the trigger software has been exercised the first time as an integrated system on this large scale. New was also to run algorithms in the online environment for the trigger selection and in the event filter processing tasks on a larger scale. A mechanism has been developed to package the offline software together with the DAQ/HLT software and to distribute it via peer-to-peer software efficiently to this large pc cluster. T...

Testing on a Large Scale running the ATLAS Data Acquisition and High Level Trigger Software on 700 PC Nodes

CERN Document Server

Burckhart-Chromek, Doris; Adragna, P; Albuquerque-Portes, M; Alexandrov, L; Amorim, A; Armstrong, S; Badescu, E; Baines, J T M; Barros, N; Beck, H P; Bee, C; Blair, R; Bogaerts, J A C; Bold, T; Bosman, M; Caprini, M; Caramarcu, C; Ciobotaru, M; Comune, G; Corso-Radu, A; Cranfield, R; Crone, G; Dawson, J; Della Pietra, M; Di Mattia, A; Dobinson, Robert W; Dobson, M; Dos Anjos, A; Dotti, A; Drake, G; Ellis, Nick; Ermoline, Y; Ertorer, E; Falciano, S; Ferrari, R; Ferrer, M L; Francis, D; Gadomski, S; Gameiro, S; Garcia-Murillo, R; Garitaonandia, H; Gaudio, G; George, S; Gesualdi-Mello, A; Gorini, B; Green, B; Haas, S; Haberichter, W N; Hadavand, H; Haeberli, C; Haller, J; Hansen, J; Hauser, R; Hillier, S J; Hughes-Jones, R E; Höcker, A; Joos, M; Kazarov, A; Kieft, G; Klous, S; Kohno, T; Kolos, S; Korcyl, K; Kordas, K; Kotov, V; Kugel, A; Landon, M; Lankford, A; Le Vine, M J; Leahu, L; Leahu, M; Lehmann-Miotto, G; Liu, W; Maeno, T; Mapelli, L; Martin, B; Masik, J; McLaren, R; Meessen, C; Meirosu, C; Mineev, M; Misiejuk, A; Morettini, P; Mornacchi, G; Männer, R; Müller, M; Nagasaka, Y; Negri, A; Padilla, C; Pasqualucci, E; Pauly, T; Perera, V; Petersen, J; Pope, B; Pretzl, K; Prigent, D; Roda, C; Ryabov, Yu; Salvatore, D; Schiavi, C; Schlereth, J L; Scholtes, I; Seixas, M; Sloper, J; Sole-Segura, E; Soloviev, I; Spiwoks, R; Stamen, R; Stancu, S; Strong, S; Sushkov, S; Szymocha, T; Tapprogge, S; Teixeira-Dias, P; Torres, R; Touchard, F; Tremblet, L; Van Wasen, J; Vandelli, W; Vaz-Gil-Lopes, L; Vermeulen, J C; Wengler, T; Werner, P; Wheeler, S; Wickens, F; Wiedenmann, W; Wiesmann, M; Wu, X; Yasu, Y; Yu, M; Zema, F; Zobernig, H; von der Schmitt, H; Ünel, G; Computing In High Energy and Nuclear Physics

2006-01-01

The ATLAS Data Acquisition (DAQ) and High Level Trigger (HLT) software system will be comprised initially of 2000 PC nodes which take part in the control, event readout, second level trigger and event filter operations. This high number of PCs will only be purchased before data taking in 2007. The large CERN IT LXBATCH facility provided the opportunity to run in July 2005 online functionality tests over a period of 5 weeks on a stepwise increasing farm size from 100 up to 700 PC dual nodes. The interplay between the control and monitoring software with the event readout, event building and the trigger software has been exercised the first time as an integrated system on this large scale. New was also to run algorithms in the online environment for the trigger selection and in the event filter processing tasks on a larger scale. A mechanism has been developed to package the offline software together with the DAQ/HLT software and to distribute it via peer-to-peer software efficiently to this large pc cluster. T...

Prostate carcinoma (PC) - an organ-related specific pathological neoplasm; Prostatakarzinom (PC) - eine organspezifische Neoplasie aus der Sicht der Pathologie

Energy Technology Data Exchange (ETDEWEB)

Massmann, J.; Funk, A. [Gemeinschaftspraxis Pathologie Massmann-Funk-Dettmar, Muenchen (Germany); Altwein, J. [Krankenhaus der Barmherzigen Brueder, Muenchen (Germany); Praetorius, M.

2003-06-01

The organ- and tumour-related specific characteristics of prostate carcinoma (PC) are presented in an overview under various aspects. It is the key for understanding pathological changes, including PC, to consider the subdivision of the prostate into anatomically and functionally distinguishable zones, especially the transitional zone (TZ) and the peripheral zone (PZ). The pseudoneoplastic hyperplasia of the TZ, combined with inflammatory consequences and age-related changes, forms a differential diagnostic challenge to both clinico-radiological diagnosis and macroscopic and microscopic examination. High-degree prostatic intra-epithelial neoplasia (PIN III) and atypical adenomatous hyperplasia (AAH) are presented as precursor lesions of PC with varying significance and assessment. Moreover, there are discussed the following characteristic features of PC: localisation types, focality, volume, progression, double-graduation according to Gleason, tumour stage, and prognosis. The most important prognosis factors of PC (category I) include the categories of the TNM system, such as stage, surgical marginal situation, degree and also the preoperative PSA level as a (poor) substitute for the tumour volume. Potential prognosis parameters (category II) show the tumour volume and the DNS ploidy, while there continues to exist a large number of non-established parameters (category III). The prognostic validity of the pathological examinations depends, on the one hand, on the tissue extent (needle biopsy, transurethral resection (TURP), so-called simple prostatectomy, radical prostatectomy (RPE)) and the prostate zones covered. On the other hand, the prognostic certainty also depends on the tumour-adequate macroscopic and microscopic assessment of an RPE that can only be a partial or complete handling in transversal large-area sections. (orig.) [German] Die organ- und tumorspezifischen Besonderheiten des Prostatakarzinoms (PC) werden in einer Uebersicht unter verschiedenen