Document control system as an integral part of RA documentation database application

International Nuclear Information System (INIS)

Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

2005-01-01

The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

Lean Production Control at a High-Variety, Low-Volume Parts Manufacturer

NARCIS (Netherlands)

Bokhorst, Jos A. C.; Slomp, Jannes

2010-01-01

Eaton Electric General Supplies, a parts manufacturing unit that supplies parts for Eaton's electrical business unit, implemented several lean control elements in its high-variety, low-volume production units. These control elements include a constant work-in-process mechanism to limit and control

MINIMIZING GLOVEBOX GLOVE BREACHES, PART IV: CONTROL CHARTS

International Nuclear Information System (INIS)

Cournoyer, Michael E.; Lee, Michelle B.; Schreiber, Stephen B.

2007-01-01

At the Los Alamos National Laboratory (LANL) Plutonium Facility, plutonium. isotopes and other actinides are handled in a glovebox environment. The spread of radiological contamination, and excursions of contaminants into the worker's breathing zone, are minimized and/or prevented through the use of glovebox technology. Evaluating the glovebox configuration, the glovebo gloves are the most vulnerable part of this engineering control. Recognizing this vulnerability, the Glovebox Glove Integrity Program (GGIP) was developed to minimize and/or prevent unplanned openings in the glovebox environment, i.e., glove failures and breaches. In addition, LANL implement the 'Lean Six Sigma (LSS)' program that incorporates the practices of Lean Manufacturing and Six Sigma technologies and tools to effectively improve administrative and engineering controls and work processes. One tool used in LSS is the use of control charts, which is an effective way to characterize data collected from unplanned openings in the glovebox environment. The benefit management receives from using this tool is two-fold. First, control charts signal the absence or presence of systematic variations that result in process instability, in relation to glovebox glove breaches and failures. Second, these graphical representations of process variation detennine whether an improved process is under control. Further, control charts are used to identify statistically significant variations (trends) that can be used in decision making to improve processes. This paper discusses performance indicators assessed by the use control charts, provides examples of control charts, and shows how managers use the results to make decisions. This effort contributes to LANL Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations.

Fundamentals of Using Battery Energy Storage Systems to Provide Primary Control Reserves in Germany

Directory of Open Access Journals (Sweden)

Alexander Zeh

2016-09-01

Full Text Available The application of stationary battery storage systems to German electrical grids can help with various storage services. This application requires controlling the charge and discharge power of such a system. For example, photovoltaic (PV home storage, uninterruptible power supply, and storage systems for providing ancillary services such as primary control reserves (PCRs represent battery applications with positive profitability. Because PCRs are essential for stabilizing grid frequency and maintaining a robust electrical grid, German transmission system operators (TSOs released strict regulations in August 2015 for providing PCRs with battery storage systems as part of regulating the International Grid Control Cooperation (IGCC region in Europe. These regulations focused on the permissible state of charge (SoC of the battery during nominal and extreme conditions. The concomitant increased capacity demand oversizing may result in a significant profitability reduction, which can be attenuated only by using an optimal parameterization of the control algorithm for energy management of the storage systems. In this paper, the sizing optimization is achieved and a recommendation for a control algorithm that includes the appropriate parameters for the requirements in the German market is given. Furthermore, the storage cost is estimated, including battery aging simulations for different aging parameter sets to allow for a realistic profitability calculation.

Controlled Nonlinear Stochastic Delay Equations: Part I: Modeling and Approximations

International Nuclear Information System (INIS)

Kushner, Harold J.

2012-01-01

This two-part paper deals with “foundational” issues that have not been previously considered in the modeling and numerical optimization of nonlinear stochastic delay systems. There are new classes of models, such as those with nonlinear functions of several controls (such as products), each with is own delay, controlled random Poisson measure driving terms, admissions control with delayed retrials, and others. There are two basic and interconnected themes for these models. The first, dealt with in this part, concerns the definition of admissible control. The classical definition of an admissible control as a nonanticipative relaxed control is inadequate for these models and needs to be extended. This is needed for the convergence proofs of numerical approximations for optimal controls as well as to have a well-defined model. It is shown that the new classes of admissible controls do not enlarge the range of the value functions, is closed (together with the associated paths) under weak convergence, and is approximatable by ordinary controls. The second theme, dealt with in Part II, concerns transportation equation representations, and their role in the development of numerical algorithms with much reduced memory and computational requirements.

Contradictions of Control, Part 1: Administrators and Teachers.

Science.gov (United States)

McNeil, Linda M.

1988-01-01

Bureaucratic controls are at war with educational goals in our school system. This disharmony drastically affects the teacher/student relationship. The first in a three-part series, this article summarizes complex ethnographic data from the report "Contradictions of Control: School Structure and School Knowledge." Includes 6 references. (MD)

Information system design of inventory control spare parts maintenance (valuation class 5000) (case study: plant kw)

Science.gov (United States)

Fitriana, Rina; Moengin, Parwadi; Riana, Mega

2016-02-01

Plat KW hadn't using optimal inventory level planning yet and hadn't have an information system that well computerized. The research objective is to be able to design an information system related inventory control of spare parts maintenance. The study focused on five types of spare parts with the highest application rate during February 2013- March 2015 and included in the classification of fast on FSN analysis Grinding stones Cut 4". Cable Tie 15". Welding RB 26-32MM. Ring Plat ½" and Ring Plate 5/8 ". Inventory calculation used Economic Order Quantity (EOQ). Safety Stock (SS) and Reorder Point (ROP) methods. System analysis conducted using the framework PIECES with the proposed inventory control system. the performance of the plant KW relating to the supply of spare parts maintenance needs can be more efficient as well as problems at the company can be answered and can perform inventory cost savings amounting Rp.267.066. A computerized information system of inventory control spare parts maintenance provides a menu that can be accessed by each departments as the user needed.

Brand Medications and Medicare Part D: How Eye Care Providers' Prescribing Patterns Influence Costs.

Science.gov (United States)

Newman-Casey, Paula Anne; Woodward, Maria A; Niziol, Leslie M; Lee, Paul P; De Lott, Lindsey B

2018-03-01

To quantify costs of eye care providers' Medicare Part D prescribing patterns for ophthalmic medications and to estimate the potential savings of generic or therapeutic drug substitutions and price negotiation. Retrospective cross-sectional study. Eye care providers prescribing medications through Medicare Part D in 2013. Medicare Part D 2013 prescriber public use file and summary file were used to calculate medication costs by physician specialty and drug. Savings from generic or therapeutic drug substitutions were estimated for brand drugs. The potential savings from price negotiation was estimated using drug prices negotiated by the United States Veterans Administration (USVA). Total cost of brand and generic medications prescribed by eye care providers. Eye care providers accounted for $2.4 billion in total Medicare part D prescription drug costs and generated the highest percentage of brand name medication claims compared with all other providers. Brand medications accounted for a significantly higher proportion of monthly supplies by volume, and therefore, also by total cost for eye care providers compared with all other providers (38% vs. 23% by volume, P total cost, P total cost attributable to eye care providers is driven by glaucoma medications, accounting for $1.2 billion (54% of total cost; 72% of total volume). The second costliest category, dry eye medications, was attributable mostly to a single medication, cyclosporine ophthalmic emulsion (Restasis, Allergan, Irvine, CA), which has no generic alternative, accounting for $371 million (17% of total cost; 4% of total volume). If generic medications were substituted for brand medications when available, $148 million would be saved (7% savings); if generic and therapeutic substitutions were made, $882 million would be saved (42% savings). If Medicare negotiated the prices for ophthalmic medications at USVA rates, $1.09 billion would be saved (53% savings). Eye care providers prescribe more brand

Not-for-profit versus for-profit health care providers--Part II: Comparing and contrasting their records.

Science.gov (United States)

Rotarius, Timothy; Trujillo, Antonio J; Liberman, Aaron; Ramirez, Bernardo

2006-01-01

The debate over which health care providers are most capably meeting their responsibilities in serving the public's interest continues unabated, and the comparisons of not-for-profit (NFP) versus for-profit (FP) hospitals remain at the epicenter of the discussion. From the perspective of available factual information, which of the two sides to this debate is correct? This article is part II of a 2-part series on comparing and contrasting the performance records of NFP health care providers with their FP counterparts. Although it is demonstrated that both NFP and FP providers perform virtuous and selfless feats on behalf of America's public, it is also shown that both camps have been accused of being involved in potentially willful clinical and administrative missteps. Part I provided the background information (eg, legal differences, perspectives on social responsibility, and types of questionable and fraudulent behavior) required to adequately understand the scope of the comparison issue. Part II offers actual comparisons of the 2 organizational structures using several disparate factors such as specific organizational behaviors, approach to the health care priorities of cost and quality, and business-focused goals of profits, efficiency, and community benefit.

Laboratory technical services provides business opportunities for supervisory control and data acquisition systems

International Nuclear Information System (INIS)

Ballard, W.

1994-01-01

The author presents some additional information about what he considers are some really great opportunities for the business community to participate in developing the greatest scientific project in the history of mankind. Facility Engineering Services is part of Laboratory Technical Services. As part of this group, it has the responsibility to direct the construction of interim facilities, scientific labs, production process, cooling towers, cooling ponds and the operation and control of SSC Laboratory conventional support systems. These operations and controls will be accomplished through the employment of a Supervisory Control and Data Acquisition system (SCADA)

40 CFR 81.31 - Metropolitan Providence Interstate Air Quality Control Region.

Science.gov (United States)

2010-07-01

... Quality Control Region. 81.31 Section 81.31 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Air Quality Control Regions § 81.31 Metropolitan Providence Interstate Air Quality Control Region. The Metropolitan Providence Interstate Air Quality Control Region (Rhode Island-Massachusetts) consists of the...

An expert system for spare parts inventory control

International Nuclear Information System (INIS)

Kim, K.Y.; Chen, P.Y.C.; Okrent, D.

1987-01-01

This paper describes an expert system which can handle spare part requirements not only in corrective maintenance (CM) or preventive maintenance (PM), but also when failure rates of components or parts are updated by new data or by predictive maintenance (PDM), and which can also decide optimum stocking level of each spare part. This expert system provides a maintenance (or inventory) manager with an improved basis for decision making in the maintenance related to spare parts. The definitions of PM and PDM from NUREG-1212 (USNRC 1986) are used herein. This expert system used Intellignece/Compiler (Intelligence Ware, 1986) as a language/tool in the IBM-PC

Dimensional control and check of field machining parts for reactor internals installation

International Nuclear Information System (INIS)

Zhang Caifang

2010-01-01

Some key issues of dimensional control for reactor internals installation are analyzed, and important technical requirements of crucial quality control elements on the measurement, machining, and checking of reactor internals filed machining parts are discussed. Moreover, provisions on quality control and risk prevention of reactor internals filed machining parts are presented in this paper. (author)

Not-for-profit versus for-profit health care providers-Part I: comparing and contrasting their records.

Science.gov (United States)

Rotarius, Timothy; Trujillo, Antonio J; Liberman, Aaron; Ramirez, Bernardo

2005-01-01

The debate over which health care providers are most capably meeting their responsibilities in serving the public's interest continues unabated, and the comparisons of not-for-profit (NFP) versus for-profit (FP) hospitals remain at the epicenter of the discussion. From the perspective of available factual information, which of the two sides to this debate is correct? This article is part I of a 2-part series on comparing and contrasting the performance records of NFP health care providers with their FP counterparts. Although it is demonstrated that both NFP and FP providers perform virtuous and selfless feats on behalf of America's public, it is also shown that both camps are involved in potentially willful clinical and administrative missteps. Part I contains the background information (eg, legal differences, perspectives on social responsibility, and types of questionable and fraudulent behavior) that is necessary to adequately understand the scope of the comparison issue. Part II offers actual comparisons of the 2 organizational structures using several disparate factors such as specific organizational behaviors, approach to the health care priorities of cost and quality, and business-focused goals of profits, efficiency, and community benefit.

47 CFR 4.3 - Communications providers covered by the requirements of this part.

Science.gov (United States)

2010-10-01

..., paging service, and/or SS7 communications. (c) IXC or LEC tandem facilities refer to tandem switches (or... provide communications services directly to end users. (e) Signaling System 7 (SS7) is a signaling system... most paging services. For purposes of this rule part, SS7 refers to both the SS7 protocol and the...

Model Predictive Control of the Exit Part Temperature for an Austenitization Furnace

Directory of Open Access Journals (Sweden)

Hari S. Ganesh

2016-12-01

Full Text Available Quench hardening is the process of strengthening and hardening ferrous metals and alloys by heating the material to a specific temperature to form austenite (austenitization, followed by rapid cooling (quenching in water, brine or oil to introduce a hardened phase called martensite. The material is then often tempered to increase toughness, as it may decrease from the quench hardening process. The austenitization process is highly energy-intensive and many of the industrial austenitization furnaces were built and equipped prior to the advent of advanced control strategies and thus use large, sub-optimal amounts of energy. The model computes the energy usage of the furnace and the part temperature profile as a function of time and position within the furnace under temperature feedback control. In this paper, the aforementioned model is used to simulate the furnace for a batch of forty parts under heuristic temperature set points suggested by the operators of the plant. A model predictive control (MPC system is then developed and deployed to control the the part temperature at the furnace exit thereby preventing the parts from overheating. An energy efficiency gain of 5.3 % was obtained under model predictive control compared to operation under heuristic temperature set points tracked by a regulatory control layer.

Control of uncertain systems by feedback linearization with neural networks augmentation. Part II. Controller validation by numerical simulation

Directory of Open Access Journals (Sweden)

Adrian TOADER

2010-09-01

Full Text Available The paper was conceived in two parts. Part I, previously published in this journal, highlighted the main steps of adaptive output feedback control for non-affine uncertain systems, having a known relative degree. The main paradigm of this approach was the feedback linearization (dynamic inversion with neural network augmentation. Meanwhile, based on new contributions of the authors, a new paradigm, that of robust servomechanism problem solution, has been added to the controller architecture. The current Part II of the paper presents the validation of the controller hereby obtained by using the longitudinal channel of a hovering VTOL-type aircraft as mathematical model.

Providing Meteorological Information for Controlled Burns at the Savannah River Site

International Nuclear Information System (INIS)

Buckley, R.

1999-01-01

Regional and local weather information are important for a variety of applications at the Savannah River Site (SRS), a Department of Energy (DOE) facility covering approximately 800 square kilometers of southwest South Carolina east of the Savannah River. For example, meteorological observations and forecasts are used to assess the consequences of an accidental radiological or chemical release. Traditionally, hazards posed by SRS operations have been associated with nuclear reactors, chemical reprocessing plants, fuel fabrication, or waste-vitrification facilities. However, recent events have shown site-specific meteorology to be a valuable tool to the United States Forest Service (USFS) in mitigating potential hazards from controlled burns that are conducted at the SRS. Prescribed burns at the SRS are important for a variety of reasons. The removal of thick undergrowth allows wildlife to more easily feed and migrate, accelerates the growth of young pine stands, and controls certain diseases that affect local pine forests (e.g. Adams et al. 1973). In addition, the removal of twigs, pine needles, or leaves (a fuel source) reduces the chance of serious wildfire damage. However, the threat of smoke inhalation and reduced visibility requires careful planning on the part of the fire professionals. At the SRS, approximately 100 square kilometers of land per year are burned in a controlled manner, mainly in the spring.To reduce the potentially harmful effects to any onsite activity, it is important that USFS personnel understand current and predicted weather patterns within the area. This paper discusses two sources of meteorological information that are provided to SRS-USFS personnel for use in planning forest burns: (1) a meteorological tower system which provides current data from a series of onsite locations, and (2) an operational prognostic mesoscale model used to generate forecast information. The forecast data supplements the basic National Weather Service (NWS

A survey on control schemes for distributed solar collector fields. Part II: Advanced control approaches

Energy Technology Data Exchange (ETDEWEB)

Camacho, E.F.; Rubio, F.R. [Universidad de Sevilla, Escuela Superior de Ingenieros, Departamento de Ingenieria de Sistemas y Automatica, Camino de Los Descubrimientos s/n, E-41092 Sevilla (Spain); Berenguel, M. [Universidad de Almeria, Departamento de Lenguajes y Computacion, Area de Ingenieria de Sistemas y Automatica, Carretera Sacramento s/n, E-04120 La Canada, Almeria (Spain); Valenzuela, L. [Plataforma Solar de Almeria - CIEMAT, Carretera Senes s/n, P.O. Box 22, E-04200 Tabernas (Almeria) (Spain)

2007-10-15

This article presents a survey of the different advanced automatic control techniques that have been applied to control the outlet temperature of solar plants with distributed collectors during the last 25 years. A classification of the modeling and control approaches described in the first part of this survey is used to explain the main features of each strategy. The treated strategies range from classical advanced control strategies to those with few industrial applications. (author)

Factors affecting sustainable animal trypanosomosis control in parts ...

African Journals Online (AJOL)

This study examined the factors affecting sustainable trypanosomiasis control in parts of Kaduna State within the sub-humid savannah ecological zone of Nigeria. Focus group discussions were ... More awareness and preference for pour-on and aerial spraying were higher than the use of traps, target or screens. Rearing of ...

Integrating Modeling and Monitoring to Provide Long-Term Control of Contaminants

International Nuclear Information System (INIS)

Fogwell, Th.

2009-01-01

An introduction is presented of the types of problems that exist for long-term control of radionuclides at DOE sites. A breakdown of the distributions at specific sites is given, together with the associated difficulties. A paradigm for remediation showing the integration of monitoring with modeling is presented. It is based on a feedback system that allows for the monitoring to act as principal sensors in a control system. Currently the establishment of a very prescriptive monitoring program fails to have a mechanism for improving models and improving control of the contaminants. The resulting system can be optimized to improve performance. Optimizing monitoring automatically entails linking the monitoring with modeling. If monitoring designs were required to be more efficient, thus requiring optimization, then the monitoring automatically becomes linked to modeling. Records of decision could be written to accommodate revisions in monitoring as better modeling evolves. The technical pieces of the required paradigm are already available; they just need to be implemented and applied to solve the long-term control of the contaminants. An integration of the various parts of the system is presented. Each part is described, and examples are given. References are given to other projects which bring together similar elements in systems for the control of contaminants. Trends are given for the development of the technical features of a robust system. Examples of monitoring methods for specific sites are given. The examples are used to illustrate how such a system would work. Examples of technology needs are presented. Finally, other examples of integrated modeling-monitoring approaches are presented. (authors)

Electronic symptom reporting between patient and provider for improved health care service quality: a systematic review of randomized controlled trials. part 1: state of the art.

Science.gov (United States)

Johansen, Monika Alise; Henriksen, Eva; Horsch, Alexander; Schuster, Tibor; Berntsen, Gro K Rosvold

2012-10-03

Over the last two decades, the number of studies on electronic symptom reporting has increased greatly. However, the field is very heterogeneous: the choices of patient groups, health service innovations, and research targets seem to involve a broad range of foci. To move the field forward, it is necessary to build on work that has been done and direct further research to the areas holding most promise. Therefore, we conducted a comprehensive review of randomized controlled trials (RCTs) focusing on electronic communication between patient and provider to improve health care service quality, presented in two parts. Part 2 investigates the methodological quality and effects of the RCTs, and demonstrates some promising benefits of electronic symptom reporting. To give a comprehensive overview of the most mature part of this emerging field regarding (1) patient groups, (2) health service innovations, and (3) research targets relevant to electronic symptom reporting. We searched Medline, EMBASE, PsycINFO, Cochrane Central Register of Controlled Trials, and IEEE Xplore for original studies presented in English-language articles published from 1990 to November 2011. Inclusion criteria were RCTs of interventions where patients or parents reported health information electronically to the health care system for health care purposes and were given feedback. Of 642 records identified, we included 32 articles representing 29 studies. The included articles were published from 2002, with 24 published during the last 5 years. The following five patient groups were represented: respiratory and lung diseases (12 studies), cancer (6), psychiatry (6), cardiovascular (3), and diabetes (1). In addition to these, 1 study had a mix of three groups. All included studies, except 1, focused on long-term conditions. We identified four categories of health service innovations: consultation support (7 studies), monitoring with clinician support (12), self-management with clinician support (9

Electronic circuit provides automatic level control for liquid nitrogen traps

Science.gov (United States)

Turvy, R. R.

1968-01-01

Electronic circuit, based on the principle of increased thermistor resistance corresponding to decreases in temperature provides an automatic level control for liquid nitrogen cold traps. The electronically controlled apparatus is practically service-free, requiring only occasional reliability checks.

Active Vibration Control of Plate Partly Treated with ACLD Using Hybrid Control

Directory of Open Access Journals (Sweden)

Dongdong Zhang

2014-01-01

Full Text Available A finite element model of plate partly treated with ACLD treatments is developed based on the constitutive equations of elastic, piezoelectric, viscoelastic materials and Hamilton’s principle. The Golla-Hughes-Mctavish (GHM method is employed to describe the frequency-dependent characteristics of viscoelastic material (VEM. A model reduction is completed by using iterative dynamic condensation and balance model reduction method to design an effective control system. The emphasis is concerned on hybrid (combined feedback/feedforward control system to attenuate the vibration of plates with ACLD treatments. The optimal linear quadratic Gaussian (LQG controller is considered as a feedback channel and the adaptive filtered-reference LMS (FxLMS controller is used as a feedforward channel. They can be utilized individually or in a hybrid way to suppress the vibration of plate/ACLD system. The results show that the hybrid controller which combines feedback/feedforward together can reduce the displacement amplitude of plate/ACLD system subjected to a complicated disturbance substantially without requiring more control effort. Furthermore, the hybrid controller has more rapid and stable convergence rate than the adaptive feedforward FxLMS controller. Meanwhile, perfect robustness to phase error of the cancellation path in feedforward controller and the weight matrices in feedback LQG controller is demonstrated in proposed hybrid controller. Therefore, its application in structural engineering can be highly appreciated.

Systems and methods for providing power to a load based upon a control strategy

Science.gov (United States)

Perisic, Milun; Kajouke, Lateef A; Ransom, Ray M

2013-12-24

Systems and methods are provided for an electrical system. The electrical system includes a load, an interface configured to receive a voltage from a voltage source, and a controller configured to receive the voltage from the voltage source through the interface and to provide a voltage and current to the load. Wherein, when the controller is in a constant voltage mode, the controller provides a constant voltage to the load, when the controller is in a constant current mode, the controller provides a constant current to the load, and when the controller is in a constant power mode, the controller provides a constant power to the load.

Adoption of electronic prescribing for controlled substances among providers and pharmacies.

Science.gov (United States)

Hufstader Gabriel, Meghan; Yang, Yi; Vaidya, Varun; Wilkins, Tricia Lee

2014-11-01

Electronic prescribing for Schedule II through V controlled substances was legalized in the United States by the Drug Enforcement Administration in June 2010. However, little information exists about adoption and use of the electronic prescribing of controlled substances (EPCS) at the national level. Therefore, the objective of this study is to present the first information about national trends surrounding the adoption and use of the newly allowed EPCS by providers and pharmacies in the United States. Trends of EPCS adoption and use were examined for the number of EPCS, number of pharmacies enabled to accept EPCS, and the number of providers prescribing controlled substances electronically. Using nationally representative transactional Surescripts data from July 2012 to December 2013, we examined EPCS trends. During the study period, the total number of EPCS increased from 1535 to 52,423, and the number and percentage of all pharmacies enabled for EPCS increased from 8768 (13%) to 20,498 pharmacies (30%). The proportion of all providers prescribing controlled substances electronically is currently 1%, but increasing steadily each month. There is a positive national growth for EPCS in pharmacy preparedness to accept EPCS, the number of EPCS prescriptions sent each month, and the number of providers with the ability to send EPCS.

Using magnetic levitation for non-destructive quality control of plastic parts.

Science.gov (United States)

Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

2015-03-04

Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of providing risk information on undergoing cervical cancer screening: a randomized controlled trial.

Science.gov (United States)

Fujiwara, Hiroyuki; Shimoda, Akihiro; Ishikawa, Yoshiki; Taneichi, Akiyo; Ohashi, Mai; Takahashi, Yoshifumi; Koyanagi, Takahiro; Morisawa, Hiroyuki; Takahashi, Suzuyo; Sato, Naoto; Machida, Shizuo; Takei, Yuji; Saga, Yasushi; Suzuki, Mitsuaki

2015-01-01

In Japan, the cervical cancer screening rate is extremely low. Towards improving the cervical cancer screening rate, encouraging eligible people to make an informed choice, which is a decision-making process that relies on beliefs informed by adequate information about the possible benefits and risks of screening, has attracted increased attention in the public health domain. However, there is concern that providing information on possible risks of screening might prevent deter from participating. In total, 1,912 women aged 20-39 years who had not participated in screening in the fiscal year were selected from a Japanese urban community setting. Participants were randomly divided into 3 groups. Group A received a printed reminder with information about the possible benefits of screening, group B received a printed reminder with information about possible benefits and risks, and group C received a printed reminder with simple information only (control group). Out of 1,912 participants, 169 (8.8%) participated in cervical cancer screening. In the intervention groups, 137 (10.9%) participated in cervical cancer screening, compared to only 32 (4.9%) of the control group (p < 0.001). In addition, logistic regression analysis revealed that there was no significant difference in screening rate between group A and group B (p = 0.372). Providing information on the possible risks of screening may not prevent people from taking part in cervical cancer screening among a Japanese non-adherent population.

ManiWordle: providing flexible control over Wordle.

Science.gov (United States)

Koh, Kyle; Lee, Bongshin; Kim, Bohyoung; Seo, Jinwook

2010-01-01

Among the multifarious tag-clouding techniques, Wordle stands out to the community by providing an aesthetic layout, eliciting the emergence of the participatory culture and usage of tag-clouding in the artistic creations. In this paper, we introduce ManiWordle, a Wordle-based visualization tool that revamps interactions with the layout by supporting custom manipulations. ManiWordle allows people to manipulate typography, color, and composition not only for the layout as a whole, but also for the individual words, enabling them to have better control over the layout result. We first describe our design rationale along with the interaction techniques for tweaking the layout. We then present the results both from the preliminary usability study and from the comparative study between ManiWordle and Wordle. The results suggest that ManiWordle provides higher user satisfaction and an efficient method of creating the desired "art work," harnessing the power behind the ever-increasing popularity of Wordle.

Aplicación de RT-Linux en el control de motores de pasos. Parte II; Appication of RT-Linux in the Control of Steps Motors. Part II

Directory of Open Access Journals (Sweden)

Ernesto Duany Renté

2011-02-01

Full Text Available Este trabajo complementa al presentado anteriormente: "Aplicación de RT-Linux en el control de motoresde pasos. Primera parte", de manera que se puedan relacionar a las tareas de adquisición y control para laobtención de un sistema lo más exacto posible. Las técnicas empleadas son las de tiempo real aprovechandolas posibilidades del microkernel RT-Linux y los software libres contenidos en sistemas Unix/Linux. Lasseñales se obtienen mediante un conversor AD y mostradas en pantalla empleando el Gnuplot.  The work presented in this paper is a complement to the control and acquisition tasks which were explainedin "Application of RT-Linux in the Control of Steps Motors. First Part", so that those both real time taskscan be fully related in order to make the whole control system more accurate. The employed techniquesare those of Real Time Taking advantage of the possibilities of the micro kernel RT-Linux and the freesoftware distributed in the Unix/Linux operating systems. The signals are obtained by means of an ADconverter and are shown in screen using Gnuplot.

Experiences of healthcare providers managing sexual assault ...

African Journals Online (AJOL)

Experiences of healthcare providers managing sexual assault victims in the emergency unit Part 2: Discussion of results and literature control. ... It was recommended that members of the multidisciplinary team engage in community activities and that the community participate in matters pertaining to sexual assault.

Nuclear reactor with scrammable part length rod

International Nuclear Information System (INIS)

Bevilacqua, F.

1979-01-01

A new part length rod is provided. It may be used to control xenon induced power oscillations but to contribute to shutdown reactivity when a rapid shutdown of the reactor is required. The part length rod consists of a control rod with three regions. The lower control region is a longer weaker active portion separated from an upper stronger shorter poison section by an intermediate section which is a relative non-absorber of neutrons. The combination of the longer weaker control section with the upper high worth poison section permits the part length rod of this to be scrammed into the core when a reactor shutdown is required but also permits the control rod to be used as a tool to control power distribution in both the axial and radial directions during normal operation

Active tilting-pad journal bearings supporting flexible rotors: Part II–The model-based feedback-controlled lubrication

DEFF Research Database (Denmark)

Salazar, Jorge Andrés González; Santos, Ilmar

2017-01-01

This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical and experimen...... derived in part I. Results show further suppression of resonant vibrations when using the feedback-controlled or active lubrication, overweighting the reduction already achieved with hybrid lubrication, thus improving the whole machine dynamic performance.......This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical...... and experimental analyses are presented with focus on the reduction of rotor lateral vibration. This part is devoted to synthesising model-based LQG optimal controllers (LQR regulator + Kalman Filter) for the feedback-controlled lubrication and is based upon the mathematical model of the rotor-bearing system...

Controlling Precision Stepper Motors in Flight Using (Almost) No Parts

Science.gov (United States)

Randall, David

2010-01-01

This concept allows control of high-performance stepper motors with minimal parts count and minimal flight software complexity. Although it uses a small number of common flight-qualified parts and simple control algorithms, it is capable enough to meet demanding system requirements. Its programmable nature makes it trivial to implement changes to control algorithms both during integration & test and in flight. Enhancements such as microstepping, half stepping, back-emf compensation, and jitter reduction can be tailored to the requirements of a large variety of stepper motor based applications including filter wheels, focus mechanisms, antenna tracking subsystems, pointing and mobility. The hardware design (using an H-bridge motor controller IC) was adapted from JPL's MER mission, still operating on Mars. This concept has been fully developed and incorporated into the MCS instrument on MRO, currently operating in Mars orbit. It has been incorporated into the filter wheel mechanism and linear stage (focus) mechanism for the AMT instrument. On MCS/MRO, two of these circuits control the elevation and azimuth of the MCS telescope/radiometer assembly, allowing the instrument to continuously monitor the limb of the Martian atmosphere. Implementation on MCS/MRO resulted in a 4:1 reduction in the volume and mass required for the motor driver electronics (100:25 square inches of PCB space), producing a very compact instrument. In fact, all of the electronics for the MCS instrument are packaged within the movable instrument structure. It also saved approximately 3 Watts of power. Most importantly, the design enabled MCS to meet very its stringent maximum allowable torque disturbance requirements.

Trends in Energy Management Technology - Part 3: State of Practiceof Energy Management, Control, and Information Systems

Energy Technology Data Exchange (ETDEWEB)

Yee, Gaymond; Webster, Tom

2004-02-01

In this report, the third in a series, we provide an evaluation of several products that exemplify the current state of practice of Energy Management, Control, and Information Systems (EMCIS). The available features for these products are summarized and analyzed with regard to emerging trends in EMCIS and potential benefits to the federal sector. The first report [1] covered enabling technologies for emerging energy management systems. The second report [2] serves as a basic reference for building control system (BCS) networking fundamentals and includes an assessment of current approaches to open communications. Part 4 of this series will discuss applications software from a user's perspective. It is important for energy managers in the Federal sector to have a high level of knowledge and understanding of these complex energy management systems. This series of reports provides energy practitioners with some basic informational and educational tools to help make decisions relative to energy management systems design, specification, procurement, and energy savings potential.

32 CFR Appendix G to Part 505 - Management Control Evaluation Checklist

Science.gov (United States)

2010-07-01

... CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. G Appendix G to Part 505—Management Control Evaluation Checklist (a) Function. The function covered by this checklist is DA Privacy...

Dimensional metrology for process and part quality control in micro manufacturing

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Tosello, Guido; Gasparin, Stefania

2011-01-01

dimensions are scaled down and geometrical complexity of objects is increased, the available measurement technologies appear not sufficient. New solutions for measuring principles and instrumentation, tolerancing rules and procedures as well as traceability and calibration are necessary if micro......Micro manufacturing has gained interest over the last decade as the demand for micro mechanical components has increased. The need for dimensional metrology at micro scale is evident both in terms of quality assurance of components and products and in terms of process control. As critical...... manufacturing is to develop into industrial manufacturing solutions. In this paper the application of dimensional precision metrology to both component and process quality control will be demonstrated. The parts investigated are micro injection moulded polymer parts, typical for the field of micro manufacturing....

29 CFR Appendix B to Part 825 - Certification of Health Care Provider (Forms WH-380E & WH-380F)

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Certification of Health Care Provider (Forms WH-380E & WH-380F) B Appendix B to Part 825 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR OTHER LAWS THE FAMILY AND MEDICAL LEAVE ACT OF 1993 Pt. 825, App. B Appendix B to Part...

Provider-caregiver-child discussions about risks associated with asthma control medications: content and prevalence.

Science.gov (United States)

Gillette, Chris; Blalock, Susan J; Rao, Jaya K; Williams, Dennis; Loughlin, Ceila E; Sleath, Betsy

2014-08-01

The objectives of this study were to: (1) describe the extent to which general pediatric providers discuss risks associated with asthma control medications with families, and (2) examine factors that are associated with risk discussions. This study was a cross-sectional secondary analysis of audio taped medical visits involving 35 pediatric providers and 248 children with asthma with their caregivers. Transcripts of the visits were coded for discussions about asthma medication risks. Generalized estimating equations were used to analyze the data. Providers discussed asthma control medication risks during 23% of visits. Risks were more likely to be discussed when the visit was longer and when the provider prescribed a new asthma control medication. When providers discussed asthma control medication risks, they were most likely to ask the family general questions and make general statements. Across all of the visits, caregivers asked a total of 16 questions and made a total of 20 statements about risks associated with asthma medications; children asked a total of 3 questions and made two statements about risks associated with asthma control medications. Providers discussed risks associated with asthma control medications in less than one-quarter of medical visits. Providers should involve families in discussions about risks associated with medications during every visit to assess potential barriers to medication adherence. © 2013 Wiley Periodicals, Inc.

A Self-Oscillating Control Scheme for a Boost Converter Providing a Controlled Output Current

DEFF Research Database (Denmark)

Knott, Arnold; Pfaffinger, Gerhard R.; Andersen, Michael A. E.

2011-01-01

Most switched mode power supplies provide a regulated voltage at their output. However, there are applications requiring a controlled current. Among others are battery chargers, test equipment for converters driven by solar cells, and LED drivers. This paper describes a dc–dc power converter real...

Quality control and process capability assessment for injection-moulded micro mechanical parts

DEFF Research Database (Denmark)

Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

2013-01-01

Quality control of micro components is an increasing challenge. Smaller mechanical parts are characterized by smaller tolerance to be verified. This paper focuses on the dimensional verification of micro injection-moulded components selected from an industrial application. These parts are measured...... using an optical coordinate measuring machine, which guarantees fast surface scans suitable for inline quality control. The uncertainty assessment of the measurements is calculated and three analyses are carried out and discussed in order to investigate the influence parameters in optical coordinate...... metrology. The estimation of the total variability of the optical measurements and the instrument repeatability are reported; moreover, the measurement system capability is evaluated according to the measurement system capability indices Cg and Cgk....

Tobacco control and gender in Southeast Asia. Part I: Malaysia and the Philippines.

Science.gov (United States)

Morrow, Martha; Barraclough, Simon

2003-09-01

In the World Health Organization's Western Pacific Region, being born male is the single greatest risk marker for tobacco use. While the literature demonstrates that risks associated with tobacco use may vary according to sex, gender refers to the socially determined roles and responsibilities of men and women, who initiate, continue and quit using tobacco for complex and often different reasons. Cigarette advertising frequently appeals to gender roles. Yet tobacco control policy tends to be gender-blind. Using a broad gender-sensitivity framework, this contradiction is explored in four Western Pacific countries. Part I of the study discusses issues surrounding gender and tobacco, and analyses developments in Malaysia and the Philippines. Part II deals with Singapore and Vietnam. In all four countries, gender was salient for the initiation and maintenance of smoking, and in Malaysia and the Philippines was highly significant in cigarette promotion. Yet, with a few exceptions, gender was largely unrecognized in control policy. Suggestions for overcoming this weakness in order to enhance tobacco control are made in Part II.

Counter of radiation in body parts

International Nuclear Information System (INIS)

Pollard, D.E.

1983-01-01

A new radiation counter for the determination of radiocontaminated body parts has been designed. Composed of several movable detectors, shielded from background radiation and focused on different parts of the human body by narrow apertures in the lead enclosure, the invention provides a quick tool for quantitative and qualitative part-by-part analysis of the body with respect to radiocontamination. The counter can be handled easily by the tested person himself and consequently, it is suitable for mass controls etc. (G.J.P.)

Transactive System: Part I: Theoretical Underpinnings of Payoff Functions, Control Decisions, Information Privacy, and Solution Concepts

Energy Technology Data Exchange (ETDEWEB)

Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Marinovici, Laurentiu D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2018-01-17

new transactive energy system design with demonstrable guarantees on stability and performance. Specifically, the goals are to (1) establish a theoretical basis for evaluating the performance of different transactive systems, (2) devise tools to address canonical problems that exemplify challenges and scenarios of transactive systems, and (3) provide guidelines for design of future transactive systems. This report, Part 1 of a two part series, advances the above-listed research objectives by reviewing existing transactive systems and identifying a theoretical foundation that integrates payoff functions, control decisions, information privacy, and mathematical solution concepts.

Operation and Management of Thermostatically Controlled Loads for Providing Regulation Services to Power Grids

Science.gov (United States)

Vanouni, Maziar

The notion of demand-side participation in power systems operation and control is on the verge of realization because of the advancement in the required technologies an tools like communications, smart meters, sensor networks, large data management techniques, large scale optimization method, etc. Therefore, demand-response (DR) programs can be one of the prosperous solutions to accommodate part of the increasing demand for load balancing services which is brought about by the high penetration of intermittent renewable energies in power systems. This dissertation studies different aspects of the DR programs that utilized the thermostatically controlled loads (TCLs) to provide load balancing services. The importance of TCLs among the other loads lie on their flexibility in power consumption pattern while the customer/end-user comfort is not (or minimally) impacted. Chapter 2 discussed a previously presented direct load control (DLC) to control the power consumption of aggregated TCLs. The DLC method performs a power tracking control and based on central approach where a central controller broadcasts the control command to the dispersed TCLs to toggle them on/off. The central controller receives measurement feedback from the TCLs once per couple of minutes to run a successful forecast process. The performance evaluation criteria to evaluate the load balancing service provided by the TCLs are presented. The results are discussed under different scenarios and situation. The numerical results show the proper performance of the DLC method. This DLC method is used as the control method in all the studies in this dissertation. Chapter 3 presents performance improvements for the original method in Chapter 2 by communicating two more pieces of information called forecast parameters (FPs). Communicating improves the forecast process in the DLC and hence, both performance accuracy and the amount of tear-and-wear imposed on the TCLs. Chapter 4 formulates a stochastic

Return to work after early part-time sick leave due to musculoskeletal disorders: a randomized controlled trial.

Science.gov (United States)

Viikari-Juntura, Eira; Kausto, Johanna; Shiri, Rahman; Kaila-Kangas, Leena; Takala, Esa-Pekka; Karppinen, Jaro; Miranda, Helena; Luukkonen, Ritva; Martimo, Kari-Pekka

2012-03-01

The purpose of this study was to assess the effects of early part-time sick leave on return to work (RTW) and sickness absence among patients with musculoskeletal disorders. A randomized controlled trial was conducted in six occupational health units of medium- and large-size enterprises. Patients aged 18-60 years with musculoskeletal disorders (N=63) unable to perform their regular work were randomly allocated to part- or full-time sick leave. In the former group, workload was reduced by restricting work time by about a half. Remaining work tasks were modified when necessary, as specified in a "fit note" from the physician. The main outcomes were time to return to regular work activities and sickness absence during 12-month follow-up. Time to RTW sustained for ≥4 weeks was shorter in the intervention group (median 12 versus 20 days, P=0.10). Hazard ratio of RTW adjusted for age was 1.60 [95% confidence interval (95% CI) 0.98-2.63] and 1.76 (95% CI 1.21-2.56) after further adjustment for pain interference with sleep and previous sickness absence at baseline. Total sickness absence during the 12-month follow-up was about 20% lower in the intervention than the control group. Compliance with the intervention was high with no discontinuations of part-time sick leave due to musculoskeletal reasons. Early part-time sick leave may provide a faster and more sustainable return to regular duties than full-time sick leave among patients with musculoskeletal disorders. This is the first study to show that work participation can be safely increased with early part-time sick leave.

A Study of Active Rotor-Blade Vibration Control using Electro-Magnetic Actuation - Part II: Experiment

DEFF Research Database (Denmark)

Christensen, Rene Hardam; Santos, Ilmar

2004-01-01

. The remaining two sets of actuators are applied to act directly onto the hub, working as an active radial bearing controlling the rotor lateral movement. The rig is equipped with sensors measuring blade and rotor vibrations. Actuators and sensors are connected to a digital signal processor running the control......This is the second paper in a two-part study on active rotor-blade vibration control. This part presents an experimental contribution into the work of active controller design for rotor-blade systems. The primary aim is to give an experimental validation and show the applicability...... algorithm. Measurement signals and actuator control signals from the sensors and actuators fixed in the rotating disc are transmitted to the control unit through a slip-ring device. Various measured responses of both the controlled and the non-controlled system with identical blades and with deliberately...

Do detour tasks provide accurate assays of inhibitory control?

Science.gov (United States)

Whiteside, Mark A.; Laker, Philippa R.; Beardsworth, Christine E.

2018-01-01

Transparent Cylinder and Barrier tasks are used to purportedly assess inhibitory control in a variety of animals. However, we suspect that performances on these detour tasks are influenced by non-cognitive traits, which may result in inaccurate assays of inhibitory control. We therefore reared pheasants under standardized conditions and presented each bird with two sets of similar tasks commonly used to measure inhibitory control. We recorded the number of times subjects incorrectly attempted to access a reward through transparent barriers, and their latencies to solve each task. Such measures are commonly used to infer the differential expression of inhibitory control. We found little evidence that their performances were consistent across the two different Putative Inhibitory Control Tasks (PICTs). Improvements in performance across trials showed that pheasants learned the affordances of each specific task. Critically, prior experience of transparent tasks, either Barrier or Cylinder, also improved subsequent inhibitory control performance on a novel task, suggesting that they also learned the general properties of transparent obstacles. Individual measures of persistence, assayed in a third task, were positively related to their frequency of incorrect attempts to solve the transparent inhibitory control tasks. Neophobia, Sex and Body Condition had no influence on individual performance. Contrary to previous studies of primates, pheasants with poor performance on PICTs had a wider dietary breadth assayed using a free-choice task. Our results demonstrate that in systems or taxa where prior experience and differences in development cannot be accounted for, individual differences in performance on commonly used detour-dependent PICTS may reveal more about an individual's prior experience of transparent objects, or their motivation to acquire food, than providing a reliable measure of their inhibitory control. PMID:29593115

Geologic map of the Providence Mountains in parts of the Fountain Peak and adjacent 7.5' quadrangles, San Bernardino County, California

Science.gov (United States)

Stone, Paul; Miller, David M.; Stevens, Calvin H.; Rosario, Jose J.; Vazquez, Jorge A.; Wan, Elmira; Priest, Susan S.; Valin, Zenon C.

2017-03-22

IntroductionThe Providence Mountains are in the eastern Mojave Desert about 60 km southeast of Baker, San Bernardino County, California. This range, which is noted for its prominent cliffs of Paleozoic limestone, is part of a northeast-trending belt of mountainous terrain more than 100 km long that also includes the Granite Mountains, Mid Hills, and New York Mountains. Providence Mountains State Recreation Area encompasses part of the range, the remainder of which is within Mojave National Preserve, a large parcel of land administered by the National Park Service. Access to the Providence Mountains is by secondary roads leading south and north from Interstate Highways 15 and 40, respectively, which bound the main part of Mojave National Preserve.The geologic map presented here includes most of Providence Mountains State Recreation Area and land that surrounds it on the north, west, and south. This area covers most of the Fountain Peak 7.5′ quadrangle and small adjacent parts of the Hayden quadrangle to the north, the Columbia Mountain quadrangle to the northeast, and the Colton Well quadrangle to the east. The map area includes representative outcrops of most of the major geologic elements of the Providence Mountains, including gneissic Paleoproterozoic basement rocks, a thick overlying sequence of Neoproterozoic to Triassic sedimentary rocks, Jurassic rhyolite that intrudes and overlies the sedimentary rocks, Jurassic plutons and associated dikes, Miocene volcanic rocks, and a variety of Quaternary surficial deposits derived from local bedrock units. The purpose of the project was to map the area in detail, with primary emphasis on the pre-Quaternary units, to provide an improved stratigraphic, structural, and geochronologic framework for use in land management applications and scientific research.

Hispanic women's health care provider control expectations: the influence of fatalism and acculturation.

Science.gov (United States)

Roncancio, Angelica M; Ward, Kristy K; Berenson, Abbey B

2011-05-01

In order to understand how culture influences Hispanic women's views about their health care provider (HCP), we examined the relationship between acculturation and fatalism in the HCP control expectations of Hispanic women. (A HCP control expectation is the extent to which an individual believes that her HCP has control over her health.) We predicted that acculturation would be negatively associated with HCP control expectations, and fatalism would be positively associated with HCP control expectations. A group of 1,027 young Hispanic women (mean age 21.24 years; SD=2.46) who were University of Texas Medical Branch clinic patients completed a comprehensive survey. Structural equation modeling was employed and, as predicted, acculturation was negatively associated with HCP control expectations (pexpectations will help us understand this population's perceptions of their HCPs. This knowledge will assist HCPs in providing culturally competent care which will increase adherence to medical treatment and screening guidelines.

25 CFR 26.30 - Does the Job Training Program provide part-time training or short-term training?

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Does the Job Training Program provide part-time training or short-term training? 26.30 Section 26.30 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES JOB PLACEMENT AND TRAINING PROGRAM Training Services § 26.30 Does the Job Training...

Telemedicine Provides Non-Inferior Research Informed Consent for Remote Study Enrollment: A Randomized Controlled Trial

Science.gov (United States)

Bobb, Morgan R.; Van Heukelom, Paul G.; Faine, Brett A.; Ahmed, Azeemuddin; Messerly, Jeffrey T.; Bell, Gregory; Harland, Karisa K.; Simon, Christian; Mohr, Nicholas M.

2016-01-01

Objective Telemedicine networks are beginning to provide an avenue for conducting emergency medicine research, but using telemedicine to recruit participants for clinical trials has not been validated. The goal of this consent study is to determine whether patient comprehension of telemedicine-enabled research informed consent is non-inferior to standard face-to-face research informed consent. Methods A prospective, open-label randomized controlled trial was performed in a 60,000-visit Midwestern academic Emergency Department (ED) to test whether telemedicine-enabled research informed consent provided non-inferior comprehension compared with standard consent. This study was conducted as part of a parent clinical trial evaluating the effectiveness of oral chlorhexidine gluconate 0.12% in preventing hospital-acquired pneumonia among adult ED patients with expected hospital admission. Prior to being recruited into the study, potential participants were randomized in a 1:1 allocation ratio to consent by telemedicine versus standard face-to-face consent. Telemedicine connectivity was provided using a commercially available interface (REACH platform, Vidyo Inc., Hackensack, NJ) to an emergency physician located in another part of the ED. Comprehension of research consent (primary outcome) was measured using the modified Quality of Informed Consent (QuIC) instrument, a validated tool for measuring research informed consent comprehension. Parent trial accrual rate and qualitative survey data were secondary outcomes. Results One-hundred thirty-one patients were randomized (n = 64, telemedicine), and 101 QuIC surveys were completed. Comprehension of research informed consent using telemedicine was not inferior to face-to-face consent (QuIC scores 74.4 ± 8.1 vs. 74.4 ± 6.9 on a 100-point scale, p = 0.999). Subjective understanding of consent (p=0.194) and parent trial study accrual rates (56% vs. 69%, p = 0.142) were similar. Conclusion Telemedicine is non-inferior to face

Picture processing computer to control movement by computer provided vision

Energy Technology Data Exchange (ETDEWEB)

Graefe, V

1983-01-01

The author introduces a multiprocessor system which has been specially developed to enable mechanical devices to interpret pictures presented in real time. The separate processors within this system operate simultaneously and independently. By means of freely moveable windows the processors can concentrate on those parts of the picture that are relevant to the control problem. If a machine is to make a correct response to its observation of a picture of moving objects, it must be able to follow the picture sequence, step by step, in real time. As the usual serially operating processors are too slow for such a task, the author describes three models of a special picture processing computer which it has been necessary to develop. 3 references.

30 CFR 90.301 - Respirable dust control plan; approval by District Manager; copy to part 90 miner.

Science.gov (United States)

2010-07-01

... District Manager; copy to part 90 miner. 90.301 Section 90.301 Mineral Resources MINE SAFETY AND HEALTH... control plan; approval by District Manager; copy to part 90 miner. (a) The District Manager will approve... District Manager shall consider whether: (1) The respirable dust control measures would be likely to...

Preliminary study of S-CO{sub 2} cycle control logic for part load operation

Energy Technology Data Exchange (ETDEWEB)

Ahn, Yoonhan; Lee, Jeong Ik [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2016-05-15

The benefits of S-CO{sub 2} cycle are relatively high efficiency under the mild turbine inlet temperature region, simple layout configuration and small foot-print. In addition, the safety of the SFR system can be inherently enhanced as the violent sodium-water reaction can be substituted with the mild sodium-CO{sub 2} reaction. 75MWe S-CO{sub 2} recompression cycle with radial type turbomachineries and PCHE was designed. Under various part load conditions (30-100% thermal load), off-design performance of the designed system was assessed, and different control logics were first tested. It was identified that the inventory control strategy is the most efficient logic for the part load operation. In the system operation, the compressor surge condition is seriously considered and controlled to avoid the system damage.

Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules

Science.gov (United States)

Ramli, Rizauddin; Yamamoto, Hidehiko; Abu Qudeiri, Jaber

This paper considers the part input problem of a production system where two Flexible Transfer Lines (FTLs) consisting of an up-stream production line and a down-stream production line while operating under Just In Time (JIT) production management. The up-stream production line processes the raw material after receiving them from suppliers, and after processing them, delivers the processed product to a down-stream production line via a conveyer. In this paper, we have proposed a novel idea for a part input real time control system, known as Algorithm for Real Time Control of Part Input Systems (ARTCOPS). The algorithm is useful when FTLs are in operation under a production order that is different from the pre-decided production schedule. Simulations of virtual production systems have been carried out to verify that ARTCOPS is useful in real time control, although the production orders are different from the pre-decided production scheduling.

Iron ore sintering. Part 3: Automatic and control systems

Directory of Open Access Journals (Sweden)

Alejandro Cores

2015-01-01

Full Text Available El proceso de sinterización implica un gran número de parámetros, más de quinientos, cada uno de los cuales ejerce una mayor o menor influencia y necesita ser controlado, dentro de los límites posibles, con el fin de optimizar la productividad, la estabilidad del proceso, y la composición y la calidad de la sinterizado producido. Para cumplir con la legislación ambiental, un sistema de control de la contaminación debe monitorizar la composición de las partículas y los gases generados en la planta de sinterización y emitidos a la atmósfera. Los sistemas de automatización y control son herramientas vitales para ayudar a los operadores de la planta en el seguimiento de cada etapa del proceso de producción de sinterizado.

Trust Control of VTOL Aircraft Part Deux

Science.gov (United States)

Dugan, Daniel C.

2014-01-01

Thrust control of Vertical Takeoff and Landing (VTOL) aircraft has always been a debatable issue. In most cases, it comes down to the fundamental question of throttle versus collective. Some aircraft used throttle(s), with a fore and aft longitudinal motion, some had collectives, some have used Thrust Levers where the protocol is still "Up is Up and Down is Down," and some have incorporated both throttles and collectives when designers did not want to deal with the Human Factors issues. There have even been combinations of throttles that incorporated an arc that have been met with varying degrees of success. A previous review was made of nineteen designs without attempting to judge the merits of the controller. Included in this paper are twelve designs entered in competition for the 1961 Tri-Service VTOL transport. Entries were from a Bell/Lockheed tiltduct, a North American tiltwing, a Vanguard liftfan, and even a Sikorsky tiltwing. Additional designs were submitted from Boeing Wichita (direct lift), Ling-Temco-Vought with its XC-142 tiltwing, Boeing Vertol's tiltwing, Mcdonnell's compound and tiltwing, and the Douglas turboduct and turboprop designs. A private party submitted a re-design of the Breguet 941 as a VTOL transport. It is important to document these 53 year-old designs to preserve a part of this country's aviation heritage.

49 CFR 1102.2 - Ex parte communications prohibited; penalties provided.

Science.gov (United States)

2010-10-01

... communication by means of the news media that in the ordinary course of business of the publisher is intended to... of the Board of such ex parte communications sent to the Section Chief. The Designated Agency Ethics... Ethics Official. The Chairman may require that any communication be placed in the correspondence section...

Adaptive Control of Non-Minimum Phase Modal Systems Using Residual Mode Filters2. Parts 1 and 2

Science.gov (United States)

Balas, Mark J.; Frost, Susan

2011-01-01

Many dynamic systems containing a large number of modes can benefit from adaptive control techniques, which are well suited to applications that have unknown parameters and poorly known operating conditions. In this paper, we focus on a direct adaptive control approach that has been extended to handle adaptive rejection of persistent disturbances. We extend this adaptive control theory to accommodate problematic modal subsystems of a plant that inhibit the adaptive controller by causing the open-loop plant to be non-minimum phase. We will modify the adaptive controller with a Residual Mode Filter (RMF) to compensate for problematic modal subsystems, thereby allowing the system to satisfy the requirements for the adaptive controller to have guaranteed convergence and bounded gains. This paper will be divided into two parts. Here in Part I we will review the basic adaptive control approach and introduce the primary ideas. In Part II, we will present the RMF methodology and complete the proofs of all our results. Also, we will apply the above theoretical results to a simple flexible structure example to illustrate the behavior with and without the residual mode filter.

Simulator with integrated HW and SW for prediction of thermal comfort to provide feedback to the climate control system

Science.gov (United States)

Pokorný, Jan; Kopečková, Barbora; Fišer, Jan; JÍcha, Miroslav

2018-06-01

The aim of the paper is to assemble a simulator for evaluation of thermal comfort in car cabins in order to give a feedback to the HVAC (heating, ventilation and air conditioning) system. The HW (hardware) part of simulator is formed by thermal manikin Newton and RH (relative humidity), velocity and temperature probes. The SW (software) part consists of the Thermal Comfort Analyser (using ISO 14505-2) and Virtual Testing Stand of Car Cabin defining the heat loads of car cabin. Simulator can provide recommendation for the climate control how to improve thermal comfort in cabin by distribution and directing of air flow, and also by amount of ventilation power to keep optimal temperature inside a cabin. The methods of evaluation of thermal comfort were verified by tests with 10 test subjects for summer (summer clothing, ambient air temperature 30 °C, HVAC setup: +24 °C auto) and winter conditions (winter clothing, ambient air temperature -5 °C, HVAC setup: +18 °C auto). The tests confirmed the validity of the thermal comfort evaluation using the thermal manikin and ISO 14505-2.

Tobacco control and gender in south-east Asia. Part II: Singapore and Vietnam.

Science.gov (United States)

Morrow, Martha; Barraclough, Simon

2003-12-01

In the World Health Organization's Western Pacific Region, being born male is the single greatest risk marker for tobacco use. While the literature demonstrates that risks associated with tobacco use may vary according to sex, gender refers to the socially determined roles and responsibilities of men and women, who initiate, continue and quit using tobacco for complex and often different reasons. Cigarette advertising frequently appeals to gender roles. Yet tobacco control policy tends to be gender-blind. Using a broad, gender-sensitivity framework, this contradiction is explored in four Western Pacific countries. Part I of the study presented the rationale, methodology and design of the study, discussed issues surrounding gender and tobacco, and analysed developments in Malaysia and the Philippines (see the previous issue of this journal). Part II deals with Singapore and Vietnam. In all four countries gender was salient for the initiation and maintenance of smoking. Yet, with a few exceptions, gender was largely unrecognized in control policy. Suggestions for overcoming this weakness in order to enhance tobacco control are made.

Impact of providing fee data on laboratory test ordering: a controlled clinical trial.

Science.gov (United States)

Feldman, Leonard S; Shihab, Hasan M; Thiemann, David; Yeh, Hsin-Chieh; Ardolino, Margaret; Mandell, Steven; Brotman, Daniel J

2013-05-27

Inpatient care providers often order laboratory tests without any appreciation for the costs of the tests. To determine whether we could decrease the number of laboratory tests ordered by presenting providers with test fees at the time of order entry in a tertiary care hospital, without adding extra steps to the ordering process. Controlled clinical trial. Tertiary care hospital. All providers, including physicians and nonphysicians, who ordered laboratory tests through the computerized provider order entry system at The Johns Hopkins Hospital. We randomly assigned 61 diagnostic laboratory tests to an "active" arm (fee displayed) or to a control arm (fee not displayed). During a 6-month baseline period (November 10, 2008, through May 9, 2009), we did not display any fee data. During a 6-month intervention period 1 year later (November 10, 2009, through May 9, 2010), we displayed fees, based on the Medicare allowable fee, for active tests only. We examined changes in the total number of orders placed, the frequency of ordered tests (per patient-day), and total charges associated with the orders according to the time period (baseline vs intervention period) and by study group (active test vs control). For the active arm tests, rates of test ordering were reduced from 3.72 tests per patient-day in the baseline period to 3.40 tests per patient-day in the intervention period (8.59% decrease; 95% CI, -8.99% to -8.19%). For control arm tests, ordering increased from 1.15 to 1.22 tests per patient-day from the baseline period to the intervention period (5.64% increase; 95% CI, 4.90% to 6.39%) (P fee data to providers at the time of order entry resulted in a modest decrease in test ordering. Adoption of this intervention may reduce the number of inappropriately ordered diagnostic tests.

Export Control Guide: Loose Parts Monitoring Systems for Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Langenberg, Donald W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2012-12-01

This report describes a typical LPMS, emphasizing its application to the RCS of a modern NPP. The report also examines the versatility of AE monitoring technology by describing several nuclear applications other than loose parts monitoring, as well as some non-nuclear applications. In addition, LPMS implementation requirements are outlined, and LPMS suppliers are identified. Finally, U.S. export controls applicable to LPMSs are discussed.

Surgical Outcome of Intermittent Exotropia With Improvement in Control Grade Subsequent to Part-time Preoperative Occlusion Therapy.

Science.gov (United States)

Bang, Seung Pil; Lee, Dong Cheol; Lee, Se Youp

2018-01-01

To evaluate the effect of improvement in the control grade of intermittent exotropia using part-time occlusion therapy on the final postoperative outcome. Control of intermittent exotropia was graded as good, fair, or poor in 89 consecutive patients with intermittent exotropia during their first visit. The patients were reevaluated after part-time preoperative occlusion therapy and divided into two groups (improvement and no improvement) according to whether they showed improvement in control grade. The surgical success rate was compared retrospectively between the two groups. The mean angle of deviation on the first visit was 27.61 ± 5.40 prism diopters (PD) at distance and 29.82 ± 5.28 PD at near. There were significant improvements in the angles of deviation for distance (26.17 ± 5.09 PD) and near (27.26 ± 5.56 PD) after part-time occlusion (both P Part-time occlusion therapy improves the control grade of intermittent exotropia, leading to a better likelihood of successful surgery and a reduction of the angles of deviation for distance and near. [J Pediatr Ophthalmol Strabismus. 2018;55(1):59-64.]. Copyright 2017, SLACK Incorporated.

Design of analog networks in the control theory formulation. Part 2: Numerical results

OpenAIRE

Zemliak, A. M.

2005-01-01

The paper presents numerical results of design of nonlinear electronic networks based on the problem formulation in terms of the control theory. Several examples illustrate the prospects of the approach suggested in the first part of the work.

25 CFR 20.102 - What is the Bureau's policy in providing financial assistance and social services under this part?

Science.gov (United States)

2010-04-01

..., DEPARTMENT OF THE INTERIOR HUMAN SERVICES FINANCIAL ASSISTANCE AND SOCIAL SERVICES PROGRAMS Definitions... this part to eligible Indians when comparable financial assistance or social services are either not... 25 Indians 1 2010-04-01 2010-04-01 false What is the Bureau's policy in providing financial...

41 CFR 61-250.99 - What is the OMB control number for this part?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true What is the OMB control... TRAINING SERVICE, DEPARTMENT OF LABOR 250-ANNUAL REPORT FROM FEDERAL CONTRACTORS § 61-250.99 What is the OMB control number for this part? Pursuant to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq., and...

41 CFR 61-300.99 - What is the OMB control number for this part?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true What is the OMB control... TRAINING SERVICE, DEPARTMENT OF LABOR 300-ANNUAL REPORT FROM FEDERAL CONTRACTORS § 61-300.99 What is the OMB control number for this part? Pursuant to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq., and...

Optimality with feedback control in relativistic dynamics of a mass point. Part 1

International Nuclear Information System (INIS)

Blaquiere, A.; Pauchard, M.; Tahri-Yousfi, N.; Wickers, D.

1984-01-01

This article is an account of part of a research task currently in progress; it deals with relativistic dynamics of a mass-point from the point of view of the theory of optimal feedback control. In the first part, the theoretical frame is presented with an application to the case of special Relativity. This application shows that the way followed in this article is a natural one for approaching Wave mechanics, and that it closely parallels the way along which Louis de Broglie introduced Wave mechanics [fr

The Global Streamflow Indices and Metadata Archive (GSIM) - Part 2: Quality control, time-series indices and homogeneity assessment

Science.gov (United States)

Gudmundsson, Lukas; Do, Hong Xuan; Leonard, Michael; Westra, Seth

2018-04-01

This is Part 2 of a two-paper series presenting the Global Streamflow Indices and Metadata Archive (GSIM), which is a collection of daily streamflow observations at more than 30 000 stations around the world. While Part 1 (Do et al., 2018a) describes the data collection process as well as the generation of auxiliary catchment data (e.g. catchment boundary, land cover, mean climate), Part 2 introduces a set of quality controlled time-series indices representing (i) the water balance, (ii) the seasonal cycle, (iii) low flows and (iv) floods. To this end we first consider the quality of individual daily records using a combination of quality flags from data providers and automated screening methods. Subsequently, streamflow time-series indices are computed for yearly, seasonal and monthly resolution. The paper provides a generalized assessment of the homogeneity of all generated streamflow time-series indices, which can be used to select time series that are suitable for a specific task. The newly generated global set of streamflow time-series indices is made freely available with an digital object identifier at https://doi.pangaea.de/10.1594/PANGAEA.887470" target="_blank">https://doi.pangaea.de/10.1594/PANGAEA.887470 and is expected to foster global freshwater research, by acting as a ground truth for model validation or as a basis for assessing the role of human impacts on the terrestrial water cycle. It is hoped that a renewed interest in streamflow data at the global scale will foster efforts in the systematic assessment of data quality and provide momentum to overcome administrative barriers that lead to inconsistencies in global collections of relevant hydrological observations.

Method for operating a nuclear reactor with scrammable part length rod

International Nuclear Information System (INIS)

Bevilacqua, F.

1979-01-01

A new part length rod is provided which may be used to control xenon induced power oscillations but also to contribute to shutdown reactivity when a rapid shutdown of the reactor is required. The part length rod consists of a control rod with three regions. The lower control region is a longer weaker active portion separated from an upper stronger shorter poison section by an intermediate section which is a relative non-absorber of neutrons. The combination of the longer weaker control section with the upper high worth poison section permits the part length rod to be scrammed into the core. When a reactor shutdown is required but also permits the control rod to be used as a tool to control power distribution in both the axial and radial directions during normal operation

Integrating CHWs as Part of the Team Leading Diabetes Group Visits: A Randomized Controlled Feasibility Study.

Science.gov (United States)

Vaughan, Elizabeth M; Johnston, Craig A; Cardenas, Victor J; Moreno, Jennette P; Foreyt, John P

2017-12-01

Purpose The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. Methods This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n = 50). Group visits met for 3 hours each month for a 6-month duration. Main measures included baseline and 6-month clinical outcomes (ie, A1C, lipids), concordance with 8 standard of care guidelines (ie, screens for cervical, breast, and colon cancer) from the US Preventive Task Force and American Diabetes Association, and participant acceptability. Results Compared to control participants, the intervention group resulted in significantly better clinical outcomes or guideline concordance for the following areas: target A1C levels, retinal eye exams, diabetes foot exams, mammograms, and urine microalbumin. Significantly more individuals in the control group gained weight, whereas a greater number of participants in the intervention group lost weight. Intervention participants found the group visits highly acceptable. Conclusions Integrating CHWs as part a comprehensive diabetes group visit program is a feasible and effective system-level intervention to improve glycemic control and achieve guideline concordance.

Structured functional assessments in general practice increased the use of part-time sick leave: a cluster randomised controlled trial.

Science.gov (United States)

Osterås, Nina; Gulbrandsen, Pål; Kann, Inger Cathrine; Brage, Søren

2010-03-01

A method for structured functional assessments of persons with long-term sick leave was implemented in a cluster randomised controlled trial in general practice. The aim was to analyse intervention effects on general practitioner (GP) sick-listing practice and patient sick leave. 57 GPs were randomly assigned to an intervention or a control group. The intervention group GPs learned the method at a 1-day workshop including teamwork and role-playing. The control group GPs were requested to assess functional ability as usual during the 8 months intervention period in 2005. Outcome measures included duration of patient sick leave episodes, GP prescription of part-time sick leave, active sick leave, and vocational rehabilitation. This data was extracted from a national register. The GPs in the intervention group prescribed part-time sick leave more often (p part-time and less active sick leave compared to the control group GPs. As a result, more intervention GP patients returned to part-time work compared to control GP patients. No intervention effect was seen on duration of patient sick leave episodes or on prescription of vocational rehabilitation.

MP-AzeFlu provides rapid and effective allergic rhinitis control: results of a non-interventional study in Romania.

Science.gov (United States)

Agache, I; Doros, I C; Leru, P M; Bucur, I; Poenaru, M; Sarafoleanu, C

2018-03-01

Allergic Rhinitis and its Impact on Asthma (ARIA) and the European Union (EU) recommend a shift to guide allergic rhinitis (AR) treatment decisions from symptom severity to disease control, using a simple visual analogue scale (VAS). Using this VAS we assessed, in a real-life study in Romania, the effectiveness of MP-AzeFlu nasal spray. In this multi-centre, prospective, non-interventional study, 253 patients (over 11 years old) with moderate-to-severe AR were prescribed MP-AzeFlu and assessed their symptoms on a VAS (0 (not at all bothersome) to 100 mm (very bothersome)) on Days 0, 1, 3, 7 and 14. The proportion of patients who achieved a defined VAS score cut-off for well-controlled (38 mm) AR were also calculated. Patients perception of disease control was assessed on Day 3. MP-AzeFlu use was associated with a mean (standard deviation) VAS score reduction from 78.4 (15.1) mm at baseline to 14.7 (15.1) mm on the last day. Effectiveness was consistent irrespective of disease severity, phenotype or patient age. 83.4% of patients achieved the smaller than 39 mm well-controlled VAS score cut-off by last day and 95.2% considered their symptoms to be well- or partly controlled at Day 3. MP-AzeFlu provided rapid, effective and sustained AR symptom control in a real-life setting in Romania, irrespective of severity, phenotype or patient age, aligning with ARIA and EU recommendations and supporting the position of MP-AzeFlu as the drug of choice for the treatment of moderate-to-severe AR.

75 FR 30410 - Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Provider...

Science.gov (United States)

2010-06-01

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Interest Project (SIP): Provider and Public Health... Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease Control and Prevention (CDC...

Simulator with integrated HW and SW for prediction of thermal comfort to provide feedback to the climate control system

Directory of Open Access Journals (Sweden)

Pokorný Jan

2018-01-01

Full Text Available The aim of the paper is to assemble a simulator for evaluation of thermal comfort in car cabins in order to give a feedback to the HVAC (heating, ventilation and air conditioning system. The HW (hardware part of simulator is formed by thermal manikin Newton and RH (relative humidity, velocity and temperature probes. The SW (software part consists of the Thermal Comfort Analyser (using ISO 14505-2 and Virtual Testing Stand of Car Cabin defining the heat loads of car cabin. Simulator can provide recommendation for the climate control how to improve thermal comfort in cabin by distribution and directing of air flow, and also by amount of ventilation power to keep optimal temperature inside a cabin. The methods of evaluation of thermal comfort were verified by tests with 10 test subjects for summer (summer clothing, ambient air temperature 30 °C, HVAC setup: +24 °C auto and winter conditions (winter clothing, ambient air temperature -5 °C, HVAC setup: +18 °C auto. The tests confirmed the validity of the thermal comfort evaluation using the thermal manikin and ISO 14505-2.

Strategic Planning: A Practical Primer for the Healthcare Provider: Part I.

Science.gov (United States)

Baum, Neil; Brockmann, Erich N; Lacho, Kenneth J

2016-01-01

Entrepreneurs are known for opportunity recognition--that is, "How can I start a business to make money from this opportunity?" However, once a commercial entity is formed to take advantage of an opportunity, the leadership priority shifts from entrepreneurial to strategic. A strategic perspective leverages limited resources to position a business for future success relative to rivals in a competitive environment. Often, the talents needed for one priority are not the same as those needed for the other. This article, the first part of a two-part article, intends to simplify the transition from an entrepreneurial to a strategic focus. It walks an entrepreneur through the strategic management planning process using a fictional business. The various tasks in the process (i.e., mission, vision, internal analysis, external analysis) are illustrated with examples from a typical primary physician's private practice. The examples show how the strategic management tasks are interrelated and ultimately lead to a philosophical approach to managing a business.

Controlling the quality of replacement parts in nuclear station, class 1E equipment

International Nuclear Information System (INIS)

Pierson, R.K.; Clemons, R.W.

1984-01-01

Nuclear station owners have traditionally purchased replacement parts for Class 1E equipment from the original supplier of the equipment. By this method, part and equipment quality could be maintained. In recent years, however, this traditional source of parts has continuously declined as an increasing number of original equipment suppliers stop producing Class 1E equipment or no longer stock parts for older equipment. When replacement parts for Class 1E equipment are not obtainable from the original suppliers, equipment owners have created a variety of methods for assuring the quality of parts obtained from other sources. A standard that provides direction and guidance for maintaining the quality of Class 1E equipment when repaired with parts from alternate sources is, therefore, needed to assure the methods in use are satisfactory and to alert the equipment owners to additional acceptable methods. The standard has now been proposed. IEEE Standard P934 (June, 1983 Draft): ''Requirements for Replacement Parts for Class 1E Equipment in Nuclear Power Generating Stations'' (Ref-3) consist of an introductory section followed by sections on part selection, procurement, replacement (including inspections and tests), non-conforming conditions and records. The proposed standard also includes a non-mandatory appendix on acceptable procurement methods and a summary intended to assist the user in selecting a proper procurement method

Integrating CHWs as part of the team leading diabetes group visits: A randomized controlled feasibility study

Science.gov (United States)

The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n=5...

NF EN ISO 11137-1, July 2006. Sterilization of health care products - Irradiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

International Nuclear Information System (INIS)

2006-01-01

This part of the ISO 11137 standard specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of this part of the ISO 11137 standard is limited to medical devices, it specifies requirements and provides guidance that may be applicable to other products and equipment. This part of the international standard covers radiation processes employing irradiators using the radionuclide 60 Co or 137 Cs, a beam from an electron generator or a beam from an X-ray generator. This part of the international standard does not: - specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease; - detail specified requirements for designating a medical device as sterile; - specify a quality management system for the control of all stages of production of medical devices; - specify requirements for occupational safety associated with the design and operation of irradiation facilities; - specify requirements for the sterilization of used or reprocessed devices

Instrumentation and control aging management: A focus on electronic parts and boards

International Nuclear Information System (INIS)

Crocombette, C.; Simon, G.; Favaro, P.; Naser, J.; Guffroy, G.

2002-01-01

Full text: The nuclear power industry is currently facing increasing aging and obsolescence issues with original equipment installed for instrumentation, control, and safety system applications. One area that needs attention is the aging of electronic boards and components used in instrumentation and control (I and C) systems in nuclear power plants (NPPs). In this context, EPRI has launched a project dedicated to NPP electronic component and board aging management. The goals of this project are: 1) to better understand the degradation mechanisms of I and C electronic systems; 2) to develop new methods to monitor prevalent mechanisms and forecast generic aging cases; and 3) to give guidelines for the aging management of I and C electronic systems. The ultimate objectives are: 1) to reduce the likelihood of losing plant availability due to a board or component failure; and 2) to reduce the global cost of maintenance by optimizing preventive maintenance tasks and the schedule for refurbishment or renewal. Degradation mechanisms of electronic boards in NPP - Aging mechanisms of electronic parts depend on technologies, manufacturing quality, and conditions of environment and operation. Aging of electronic parts is well documented in harsh environments (e.g., aerospace, military, or automotive industries data). However, only a small amount of data on electronic part failures in NPPs is available because the conditions are benign and the failure rates are supposed to be low. It is thus difficult to identify what will predominantly cause the aging of electronic systems after 20 or 30 years of operation. Usual causes are temperature, corrosion, temperature cycles, or extrinsic aggressions (Electrical Over Stress (EOS), Electro Static Discharges (ESD)). From field data and bibliographic analyses, we found that electrolytic capacitors, relays, potentiometers, power devices (thyristors, power transistors, etc.), optocouplers, on-board connectors, printed boards, integrated

The Global Streamflow Indices and Metadata Archive (GSIM – Part 2: Quality control, time-series indices and homogeneity assessment

Directory of Open Access Journals (Sweden)

L. Gudmundsson

2018-04-01

Full Text Available This is Part 2 of a two-paper series presenting the Global Streamflow Indices and Metadata Archive (GSIM, which is a collection of daily streamflow observations at more than 30 000 stations around the world. While Part 1 (Do et al., 2018a describes the data collection process as well as the generation of auxiliary catchment data (e.g. catchment boundary, land cover, mean climate, Part 2 introduces a set of quality controlled time-series indices representing (i the water balance, (ii the seasonal cycle, (iii low flows and (iv floods. To this end we first consider the quality of individual daily records using a combination of quality flags from data providers and automated screening methods. Subsequently, streamflow time-series indices are computed for yearly, seasonal and monthly resolution. The paper provides a generalized assessment of the homogeneity of all generated streamflow time-series indices, which can be used to select time series that are suitable for a specific task. The newly generated global set of streamflow time-series indices is made freely available with an digital object identifier at https://doi.pangaea.de/10.1594/PANGAEA.887470 and is expected to foster global freshwater research, by acting as a ground truth for model validation or as a basis for assessing the role of human impacts on the terrestrial water cycle. It is hoped that a renewed interest in streamflow data at the global scale will foster efforts in the systematic assessment of data quality and provide momentum to overcome administrative barriers that lead to inconsistencies in global collections of relevant hydrological observations.

Electronic Control Of Small Hydro-Generators Part II

International Nuclear Information System (INIS)

Diaz B, Pedro; Torres M, Carlos A.

1994-01-01

The present project arises for the Colombian population's necessity to overcome the underdevelopment, the poverty, the education and the level of life in rural areas of difficult access, for an economic rural electrification. The UIS, by means of the advisory committee of investigations of the ability of Physical-mechanical Sciences and the ability of Electricity and Electronic, it begins the process of developing in 1991 a study of economic and reliable control for the handling of small micro-centrals. Providing from electric power to the rural sector is a world problem, and have more than enough this some countries (China, Nepal, Peru, The islands of Papua, New Guinea), they have made investigations, outlining and building central micro controlled by microprocessor. The present study is developed with the objective of carrying out a load control that acts reliable and quickly. Traditionally they have been come using mechanical governors, which are those in charge of making the load control by means of valves that regulate the flow of water in the turbines, involving this way big retards characteristic of any mechanical control. In summary, the electronic governor of load presents on the mechanical governor, the advantage of acting to more speed and consequently to maintain stable the frequency of the system. To continue with the study, the objective that this project must develop, is an electronic control of load which presents to a small hydro generator, a relatively constant and independent electric load that the demanded consumption for the user varies from none to full load, given as initial parameters a constant flow in the turbine and a control in the line tension. This way it seeks to improve the energy quality given by isolated generators

Human-Inspired Eigenmovement Concept Provides Coupling-Free Sensorimotor Control in Humanoid Robot.

Science.gov (United States)

Alexandrov, Alexei V; Lippi, Vittorio; Mergner, Thomas; Frolov, Alexander A; Hettich, Georg; Husek, Dusan

2017-01-01

Control of a multi-body system in both robots and humans may face the problem of destabilizing dynamic coupling effects arising between linked body segments. The state of the art solutions in robotics are full state feedback controllers. For human hip-ankle coordination, a more parsimonious and theoretically stable alternative to the robotics solution has been suggested in terms of the Eigenmovement (EM) control. Eigenmovements are kinematic synergies designed to describe the multi DoF system, and its control, with a set of independent, and hence coupling-free , scalar equations. This paper investigates whether the EM alternative shows "real-world robustness" against noisy and inaccurate sensors, mechanical non-linearities such as dead zones, and human-like feedback time delays when controlling hip-ankle movements of a balancing humanoid robot. The EM concept and the EM controller are introduced, the robot's dynamics are identified using a biomechanical approach, and robot tests are performed in a human posture control laboratory. The tests show that the EM controller provides stable control of the robot with proactive ("voluntary") movements and reactive balancing of stance during support surface tilts and translations. Although a preliminary robot-human comparison reveals similarities and differences, we conclude (i) the Eigenmovement concept is a valid candidate when different concepts of human sensorimotor control are considered, and (ii) that human-inspired robot experiments may help to decide in future the choice among the candidates and to improve the design of humanoid robots and robotic rehabilitation devices.

Part-load pumping operation, control and behaviour

International Nuclear Information System (INIS)

1988-01-01

Twenty one papers are printed. Their main concern is with pump performance under abnormal operating conditions or when operating at part-load. The effect of part-load operation on pump performance, pump internal flow and pump cavitation and noise were considered. The pumps considered are used in a variety of situations and some case studies were discussed. One paper about part-load operation of the boiler pumps for French pressurized water reactors and one paper on pressure pulsations of centrifugal pumps at very low flowrate, are indexed separately. (U.K.)

Part load performance of air-cooled centrifugal chillers with variable speed condenser fan control

Energy Technology Data Exchange (ETDEWEB)

Yu, F.W.; Chan, K.T. [Department of Building Services Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China)

2007-11-15

Air-cooled centrifugal chillers are commonly used in commercial buildings but their performance analysis is lacking. This paper investigates the part load performance of the chillers via a thermodynamic model. The model was validated using a wide range of operating data from an existing chiller with specific settings of outdoor temperature and condensing pressure in controlling the condensing temperature. The validated model was developed specifically to ascertain the maximum coefficient of performance of chiller (COP) together with the strategy for optimizing the condensing temperature under various operating conditions. It is found that the highest COP occurs at a part load ratio (PLR) of 0.71-0.84, depending on the outdoor temperature and the control of condensing temperature, rather than at full load. Yet the chillers operating at such part load conditions will cause extra energy used for the early staging of chilled water pumps. To minimize the overall chiller plant energy consumption, it is still preferable to implement chiller sequencing based on the full load condition than on the aforementioned PLRs. The results of this paper present criteria for implementing low-energy strategies for operating air-cooled chillers satisfying a given building cooling load profile. (author)

Wind farms providing secondary frequency regulation: evaluating the performance of model-based receding horizon control

Directory of Open Access Journals (Sweden)

C. R. Shapiro

2018-01-01

Full Text Available This paper is an extended version of our paper presented at the 2016 TORQUE conference (Shapiro et al., 2016. We investigate the use of wind farms to provide secondary frequency regulation for a power grid using a model-based receding horizon control framework. In order to enable real-time implementation, the control actions are computed based on a time-varying one-dimensional wake model. This model describes wake advection and wake interactions, both of which play an important role in wind farm power production. In order to test the control strategy, it is implemented in a large-eddy simulation (LES model of an 84-turbine wind farm using the actuator disk turbine representation. Rotor-averaged velocity measurements at each turbine are used to provide feedback for error correction. The importance of including the dynamics of wake advection in the underlying wake model is tested by comparing the performance of this dynamic-model control approach to a comparable static-model control approach that relies on a modified Jensen model. We compare the performance of both control approaches using two types of regulation signals, RegA and RegD, which are used by PJM, an independent system operator in the eastern United States. The poor performance of the static-model control relative to the dynamic-model control demonstrates that modeling the dynamics of wake advection is key to providing the proposed type of model-based coordinated control of large wind farms. We further explore the performance of the dynamic-model control via composite performance scores used by PJM to qualify plants for regulation services or markets. Our results demonstrate that the dynamic-model-controlled wind farm consistently performs well, passing the qualification threshold for all fast-acting RegD signals. For the RegA signal, which changes over slower timescales, the dynamic-model control leads to average performance that surpasses the qualification threshold, but further

Active Control of Low-Speed Fan Tonal Noise Using Actuators Mounted in Stator Vanes: Part III Results

Science.gov (United States)

Sutliff, Daniel L.; Remington, Paul J.; Walker, Bruce E.

2003-01-01

A test program to demonstrate simplification of Active Noise Control (ANC) systems relative to standard techniques was performed on the NASA Glenn Active Noise Control Fan from May through September 2001. The target mode was the m = 2 circumferential mode generated by the rotor-stator interaction at 2BPF. Seven radials (combined inlet and exhaust) were present at this condition. Several different error-sensing strategies were implemented. Integration of the error-sensors with passive treatment was investigated. These were: (i) an in-duct linear axial array, (ii) an induct steering array, (iii) a pylon-mounted array, and (iv) a near-field boom array. The effect of incorporating passive treatment was investigated as well as reducing the actuator count. These simplified systems were compared to a fully ANC specified system. Modal data acquired using the Rotating Rake are presented for a range of corrected fan rpm. Simplified control has been demonstrated to be possible but requires a well-known and dominant mode signature. The documented results here in are part III of a three-part series of reports with the same base title. Part I and II document the control system and error-sensing design and implementation.

Human-Inspired Eigenmovement Concept Provides Coupling-Free Sensorimotor Control in Humanoid Robot

Directory of Open Access Journals (Sweden)

Thomas Mergner

2017-04-01

Full Text Available Control of a multi-body system in both robots and humans may face the problem of destabilizing dynamic coupling effects arising between linked body segments. The state of the art solutions in robotics are full state feedback controllers. For human hip-ankle coordination, a more parsimonious and theoretically stable alternative to the robotics solution has been suggested in terms of the Eigenmovement (EM control. Eigenmovements are kinematic synergies designed to describe the multi DoF system, and its control, with a set of independent, and hence coupling-free, scalar equations. This paper investigates whether the EM alternative shows “real-world robustness” against noisy and inaccurate sensors, mechanical non-linearities such as dead zones, and human-like feedback time delays when controlling hip-ankle movements of a balancing humanoid robot. The EM concept and the EM controller are introduced, the robot's dynamics are identified using a biomechanical approach, and robot tests are performed in a human posture control laboratory. The tests show that the EM controller provides stable control of the robot with proactive (“voluntary” movements and reactive balancing of stance during support surface tilts and translations. Although a preliminary robot-human comparison reveals similarities and differences, we conclude (i the Eigenmovement concept is a valid candidate when different concepts of human sensorimotor control are considered, and (ii that human-inspired robot experiments may help to decide in future the choice among the candidates and to improve the design of humanoid robots and robotic rehabilitation devices.

Fractional Programming for Communication Systems—Part I: Power Control and Beamforming

Science.gov (United States)

Shen, Kaiming; Yu, Wei

2018-05-01

This two-part paper explores the use of FP in the design and optimization of communication systems. Part I of this paper focuses on FP theory and on solving continuous problems. The main theoretical contribution is a novel quadratic transform technique for tackling the multiple-ratio concave-convex FP problem--in contrast to conventional FP techniques that mostly can only deal with the single-ratio or the max-min-ratio case. Multiple-ratio FP problems are important for the optimization of communication networks, because system-level design often involves multiple signal-to-interference-plus-noise ratio terms. This paper considers the applications of FP to solving continuous problems in communication system design, particularly for power control, beamforming, and energy efficiency maximization. These application cases illustrate that the proposed quadratic transform can greatly facilitate the optimization involving ratios by recasting the original nonconvex problem as a sequence of convex problems. This FP-based problem reformulation gives rise to an efficient iterative optimization algorithm with provable convergence to a stationary point. The paper further demonstrates close connections between the proposed FP approach and other well-known algorithms in the literature, such as the fixed-point iteration and the weighted minimum mean-square-error beamforming. The optimization of discrete problems is discussed in Part II of this paper.

Influence of control algorithms parameters on an electromechanical converter with a secondary discrete part

Directory of Open Access Journals (Sweden)

Kuimov Denis

2017-01-01

Full Text Available An alternative configuration of a device with a secondary discrete part using a magnetic system of a similar multi-phase inductor machine and concentrated windings without an internal rotor is proposed. An algorithm of sensorless control of a motion process of a secondary discrete part is proposed. The analysis of the distribution nature of the magnetic field for various switching algorithms is carried out to reduce negative influence of the “dead” zones of the first and second order. The features of the movement process of the secondary discrete part in the working chamber of the device are considered. The results of in the electromagnetic force change affecting a ferromagnetic working element are presented, and recommendations for the application of switching algorithms are given.

A HACCP-based approach to mastitis control in dairy herds. Part 2: Implementation and evaluation

Science.gov (United States)

2011-01-01

Part 1 of the study described the development of a Hazard Analysis and Critical Control Point (HACCP) based programme and accompanying handbook for the control of mastitis. This paper describes the implementation and evaluation of customised HACCP-based programmes, which were developed from the handbook and assessed on six Irish dairy farms. Both quantitative and qualitative (action research) research methodologies were used to measure the success of implementation and efficacy of control of sub-clinical mastitis as measured by Somatic Cell Counts (SCC) and the degree of compliance by farmers in adopting and maintaining recommendations throughout the course of the study period. No overall differences in SCC before and during the implementation of the study were found when all six farms were considered together. Three of the six study farms experienced a significant decrease in herd milk recorded SCC during the implementation of the control programme. An essential part of the study was achieving initial agreement on recommendations as well as ongoing monitoring of compliance during the study. This pilot study shows that HACCP can be implemented on farms as a means of working towards the control of mastitis and that farmer attitude, and understanding of mastitis are crucial in terms of motivation irrespective of practical approaches used to manage mastitis. PMID:21777494

Production and quality control of concrete for the Rajasthan Atomic Power Station - [Part 2

International Nuclear Information System (INIS)

Singh Roy, P.K.; Sukhtankar, K.D.; Prasad, K.

1975-01-01

The following aspects of the production and quality control of concrete and concrete materials used in the construction of twin-reactor Rajasthan Atomic Power Station are discussed : (1) relationship between strength of cubes and cylinders made of concrete used for the prestressed dome (2) temperature control during pouring of concrete (3) thermal conductivity of heavy concrete (4) various types of grouting procedures used for different structures forming part of reactors (5) quality control of normal and heavy concrete and (6) leakage through form ties. Typical concrete mixes used for grouts are also given. (M.G.B.)

The part task of the part-spacing paradigm is not a pure measurement of part-based information of faces.

Directory of Open Access Journals (Sweden)

Qi Zhu

Full Text Available BACKGROUND: Faces are arguably one of the most important object categories encountered by human observers, yet they present one of the most difficult challenges to both the human and artificial visual systems. A variety of experimental paradigms have been developed to study how faces are represented and recognized, among which is the part-spacing paradigm. This paradigm is presumed to characterize the processing of both the featural and configural information of faces, and it has become increasingly popular for testing hypotheses on face specificity and in the diagnosis of face perception in cognitive disorders. METHODOLOGY/PRINCIPAL FINDINGS: In two experiments we questioned the validity of the part task of this paradigm by showing that, in this task, measuring pure information about face parts is confounded by the effect of face configuration on the perception of those parts. First, we eliminated or reduced contributions from face configuration by either rearranging face parts into a non-face configuration or by removing the low spatial frequencies of face images. We found that face parts were no longer sensitive to inversion, suggesting that the previously reported inversion effect observed in the part task was due in fact to the presence of face configuration. Second, self-reported prosopagnosic patients who were selectively impaired in the holistic processing of faces failed to detect part changes when face configurations were presented. When face configurations were scrambled, however, their performance was as good as that of normal controls. CONCLUSIONS/SIGNIFICANCE: In sum, consistent evidence from testing both normal and prosopagnosic subjects suggests the part task of the part-spacing paradigm is not an appropriate task for either measuring how face parts alone are processed or for providing a valid contrast to the spacing task. Therefore, conclusions from previous studies using the part-spacing paradigm may need re-evaluation with

[Scientific reductionism and social control of mind. Part II].

Science.gov (United States)

Viniegra Velázquez, Leonardo

In the second part of this essay, the progressive subordination of scientific endeavor and knowledge of business and profit is pointed out. For instance, the way facts are prioritized over concepts and ideas in scientific knowledge can translate into technological innovation, central to enterprise competitiveness and key to social mechanisms of control (military, cybernetic, ideological). Overcoming the scientific reductionism approach indicates recognizing the need to define progress in another way, one that infuses scientific knowledge with real liberating and inquisitive power. Power is essential in the search for a more collaborative, inclusive and pluralistic society where respect for human dignity and care for the ecosystem that we live in are prioritized. Copyright © 2014 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

Additive Manufacturing: Multi Material Processing and Part Quality Control

DEFF Research Database (Denmark)

Pedersen, David Bue

This Ph.D dissertation,ffAdditive Manufacturing: Multi Material Processing and Part Quality Controlff, deal with Additive Manufacturing technologies which is a common name for a series of processes that are recognized by being computer controlled, highly automated, and manufacture objects...... by a layered deposition of material. Two areas of particular interest is addressed. They are rooted in two very different areas, yet is intended to fuel the same goal. To help Additive Manufacturing technologies one step closer to becoming the autonomous, digital manufacturing method of tomorrow. Vision...... systems A paradox exist in the field of Additive Manufacturing. The technologies allow for close-to unrestrained and integral geometrical freedom. Almost any geometry can be manufactured fast, e"ciently and cheap. Something that has been missing fundamental capability since the entering of the industrial...

Taxonomy of Means and Ends in Aquaculture Production—Part 2: The Technical Solutions of Controlling Solids, Dissolved Gasses and pH

Directory of Open Access Journals (Sweden)

Bjorgvin Vilbergsson

2016-09-01

Full Text Available In engineering design, knowing the relationship between the means (technique and the end (desired function or outcome is essential. The means in Aquaculture are technical solutions like airlifts that are used to achive desired functionality (an end like controlling dissolved gasses. In previous work, the authors identified possible functions by viewing aquaculture production systems as transformation processes in which inputs are transformed by treatment techniques (means and produce outputs (ends. The current work creates an overview of technical solutions of treatment functions for both design and research purposes. A comprehensive literature review of all areas of technical solutions is identified and categorized into a visual taxonomy of the treatment functions for controlling solids, controlling dissolved gasses and controlling pH alkalinity and hardness. This article is the second in a sequence of four and partly presents the treatments functions in the taxonomy. The other articles in this series present complementary aspects of this research: Part 1, A transformational view on aquaculture and functions divided into input, treatment and output functions; Part 2, The current taxonomy paper; Part 3, The second part of the taxonomy; and Part 4, Mapping of the means (techniques for multiple treatment functions.

Method for assembling dynamoelectric machine end shield parts

International Nuclear Information System (INIS)

Thomson, J.M.

1984-01-01

Methods, apparatus, and systems are provided for automatically assembling end shield assemblies of subassemblies for electric motors. In a preferred form, a system and methods are provided that utilize a non-palletized, non-synchronous concept to convey end shields through a number of assembly stations. At process stations situated along a conveyor, operations are performed on components. One method includes controlling traffic of sub-assemblies by toggle type escapements. A stop or latch of unique design stops end shield components in midstream, and ''lifts'' of unique design disengage parts from the conveyor and also support such parts during various operations. Photo-optic devices and proximity and reed switch mechanisms are utilized for control purposes. The work stations involved in one system include a unique assembly and pressing station involving oil well covers; a unique feed wick seating system; a unique lubricant adding operation; and unique ''building block'' mechanisms and methods

Radiation protection at the RA Reactor in 1988, Part -2, Annex 2c, Environmental radioactivity control, meteorology measurements

International Nuclear Information System (INIS)

Grsic, Z.; Zaric, M.; Adamovic, M.; Stevanovic, M.

1988-01-01

During 1988, meteorology measurements were continued as a part of the environmental control of the Vinca Institute. This report covers the period from November 1984 - November 1985. Part of the meteorology measurements and data analysis is adapted to the needs of the Institute, i.e. RA reactor and some Laboratories. The objective of these activities is forming the data base for solving everyday and special problems related to control, protection and safety of Institute environment [sr

A-Part Gel, an adhesion prophylaxis for abdominal surgery: a randomized controlled phase I-II safety study [NCT00646412].

Science.gov (United States)

Lang, Reinhold; Baumann, Petra; Schmoor, Claudia; Odermatt, Erich K; Wente, Moritz N; Jauch, Karl-Walter

2015-01-01

Intra-abdominal surgical intervention can cause the development of intra-peritoneal adhesions. To reduce this problem, different agents have been tested to minimize abdominal adhesions; however, the optimal adhesion prophylaxis has not been found so far. Therefore, the A-Part(®) Gel was developed as a barrier to diminish postsurgical adhesions; the aim of this randomized controlled study was a first evaluation of its safety and efficacy. In this prospective, controlled, randomized, patient-blinded, monocenter phase I-II study, 62 patients received either the hydrogel A-Part-Gel(®) as an anti-adhesive barrier or were untreated after primary elective median laparotomy. Primary endpoint was the occurrence of peritonitis and/or wound healing impairment 28 ± 10 days postoperatively. As secondary endpoints anastomotic leakage until 28 days after surgery, adverse events and adhesions were assessed until 3 months postoperatively. A lower rate of wound healing impairment and/or peritonitis was observed in the A-Part Gel(®) group compared to the control group: (6.5 vs. 13.8 %). The difference between the two groups was -7.3%, 90 % confidence interval [-20.1, 5.4 %]. Both treatment groups showed similar frequency of anastomotic leakage but incidence of adverse events and serious adverse events were slightly lower in the A-Part Gel(®) group compared to the control. Adhesion rates were comparable in both groups. A-Part Gel(®) is safe as an adhesion prophylaxis after abdominal wall surgery but no reduction of postoperative peritoneal adhesion could be found in comparison to the control group. This may at least in part be due to the small sample size as well as to the incomplete coverage of the incision due to the used application. NCT00646412.

Effects of a Patient-Provider, Collaborative, Medication-Planning Tool: A Randomized, Controlled Trial

Directory of Open Access Journals (Sweden)

James F. Graumlich

2016-01-01

Full Text Available Among patients with various levels of health literacy, the effects of collaborative, patient-provider, medication-planning tools on outcomes relevant to self-management are uncertain. Objective. Among adult patients with type II diabetes mellitus, we tested the effectiveness of a medication-planning tool (Medtable™ implemented via an electronic medical record to improve patients’ medication knowledge, adherence, and glycemic control compared to usual care. Design. A multicenter, randomized controlled trial in outpatient primary care clinics. 674 patients received either the Medtable tool or usual care and were followed up for up to 12 months. Results. Patients who received Medtable had greater knowledge about indications for medications in their regimens and were more satisfied with the information about their medications. Patients’ knowledge of drug indication improved with Medtable regardless of their literacy status. However, Medtable did not improve patients’ demonstrated medication use, regimen adherence, or glycemic control (HbA1c. Conclusion. The Medtable tool supported provider/patient collaboration related to medication use, as reflected in patient satisfaction with communication, but had limited impact on patient medication knowledge, adherence, and HbA1c outcomes. This trial is registered with ClinicalTrials.gov NCT01296633.

A HACCP-based approach to mastitis control in dairy herds. Part 1: Development.

Science.gov (United States)

Beekhuis-Gibbon, Lies; Whyte, Paul; O'Grady, Luke; More, Simon J; Doherty, Michael L

2011-03-31

Hazard Analysis and Critical Control Points (HACCP) systems are a risk based preventive approach developed to increase levels of food safety assurance. This is part 1 of a pilot study on the development, implementation and evaluation of a HACCP-based approach for the control of good udder health in dairy cows. The paper describes the use of a novel approach based on a deconstruction of the infectious process in mastitis to identify Critical Control Points (CCPs) and develop a HACCP-based system to prevent and control mastitis in dairy herds. The approach involved the creation of an Infectious Process Flow Diagram, which was then cross-referenced to two production process flow diagrams of the milking process and cow management cycle. The HACCP plan developed, may be suitable for customisation and implementation on dairy farms. This is a logical, systematic approach to the development of a mastitis control programme that could be used as a template for the development of control programmes for other infectious diseases in the dairy herd.

A HACCP-based approach to mastitis control in dairy herds. Part 1: Development

Directory of Open Access Journals (Sweden)

Beekhuis-Gibbon Lies

2011-03-01

Full Text Available Abstract Hazard Analysis and Critical Control Points (HACCP systems are a risk based preventive approach developed to increase levels of food safety assurance. This is part 1 of a pilot study on the development, implementation and evaluation of a HACCP-based approach for the control of good udder health in dairy cows. The paper describes the use of a novel approach based on a deconstruction of the infectious process in mastitis to identify Critical Control Points (CCPs and develop a HACCP-based system to prevent and control mastitis in dairy herds. The approach involved the creation of an Infectious Process Flow Diagram, which was then cross-referenced to two production process flow diagrams of the milking process and cow management cycle. The HACCP plan developed, may be suitable for customisation and implementation on dairy farms. This is a logical, systematic approach to the development of a mastitis control programme that could be used as a template for the development of control programmes for other infectious diseases in the dairy herd.

Dissociative Part-Dependent Resting-State Activity in Dissociative Identity Disorder: A Controlled fMRI Perfusion Study

OpenAIRE

Schlumpf, Yolanda R.; Reinders, Antje A. T. S.; Nijenhuis, Ellert R. S.; Luechinger, Roger; van Osch, Matthias J. P.; Jäncke, Lutz

2014-01-01

Background: In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part'' (EP) and the "Apparently Normal Part'' (ANP), have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors. Methods: Arterial ...

Tunable, Flexible and Efficient Optimization of Control Pulses for Superconducting Qubits, part II - Applications

Science.gov (United States)

AsséMat, Elie; Machnes, Shai; Tannor, David; Wilhelm-Mauch, Frank

In part I, we presented the theoretic foundations of the GOAT algorithm for the optimal control of quantum systems. Here in part II, we focus on several applications of GOAT to superconducting qubits architecture. First, we consider a control-Z gate on Xmons qubits with an Erf parametrization of the optimal pulse. We show that a fast and accurate gate can be obtained with only 16 parameters, as compared to hundreds of parameters required in other algorithms. We present numerical evidences that such parametrization should allow an efficient in-situ calibration of the pulse. Next, we consider the flux-tunable coupler by IBM. We show optimization can be carried out in a more realistic model of the system than was employed in the original study, which is expected to further simplify the calibration process. Moreover, GOAT reduced the complexity of the optimal pulse to only 6 Fourier components, composed with analytic wrappers.

14 CFR Appendix I to Part 25 - Installation of an Automatic Takeoff Thrust Control System (ATTCS)

Science.gov (United States)

2010-01-01

... Appendix I to Part 25—Installation of an Automatic Takeoff Thrust Control System (ATTCS) I25.1General. (a... crew to increase thrust or power. I25.2Definitions. (a) Automatic Takeoff Thrust Control System (ATTCS... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Installation of an Automatic Takeoff Thrust...

33 CFR Appendix C to Part 273 - Information Requirements for Aquatic Plant Control Program Environmental Impact Statements

Science.gov (United States)

2010-07-01

... Aquatic Plant Control Program Environmental Impact Statements C Appendix C to Part 273 Navigation and... Environmental Impact Statements 1. Description of the problem. a. Pests. Identify the pest to be controlled by.... Relationship to environmental situation. Non-target organisms and integrated pest management programs. 2...

Dynamic Stability of Cylindrical Shells under Moving Loads by Applying Advanced Controlling Techniques—Part II: Using Piezo-Stack Control

Directory of Open Access Journals (Sweden)

Khaled M. Saadeldin Eldalil

2009-01-01

Full Text Available The load acting on the actively controlled cylindrical shell under a transient pressure pulse propelling a moving mass (gun case has been experimentally studied. The concept of using piezoelectric stack and stiffener combination is utilized for damping the tube wall radial and circumferential deforming vibrations, in the correct meeting location timing of the moving mass. The experiment was carried out by using the same stiffened shell tube of the experimental 14 mm gun tube facility which is used in part 1. Using single and double stacks is tried at two pressure levels of low-speed modes, which have response frequencies adapted with the used piezoelectric stacks characteristics. The maximum active damping ratio is occurred at high-pressure level. The radial circumferential strains are measured by using high-frequency strain gage system in phase with laser beam detection system similar to which used in part 1. Time resolved strain measurements of the wall response were obtained, and both precursor and transverse hoop strains have been resolved. A complete comparison had been made between the effect of active controlled and stepped structure cases, which indicate a significant attenuation ratio especially at higher operating pressures.

Optimal Control and Optimization of Stochastic Supply Chain Systems

CERN Document Server

Song, Dong-Ping

2013-01-01

Optimal Control and Optimization of Stochastic Supply Chain Systems examines its subject in the context of the presence of a variety of uncertainties. Numerous examples with intuitive illustrations and tables are provided, to demonstrate the structural characteristics of the optimal control policies in various stochastic supply chains and to show how to make use of these characteristics to construct easy-to-operate sub-optimal policies.                 In Part I, a general introduction to stochastic supply chain systems is provided. Analytical models for various stochastic supply chain systems are formulated and analysed in Part II. In Part III the structural knowledge of the optimal control policies obtained in Part II is utilized to construct easy-to-operate sub-optimal control policies for various stochastic supply chain systems accordingly. Finally, Part IV discusses the optimisation of threshold-type control policies and their robustness. A key feature of the book is its tying together of ...

Parts, materials, and processes experience summary, volume 2. [design, engineering, and quality control

Science.gov (United States)

1973-01-01

This summary provides the general engineering community with the accumulated experience from ALERT reports issued by NASA and the Government-Industry. Data Exchange Program, and related experience gained by Government and industry. It provides expanded information on selected topics by relating the problem area (failure) to the cause, the investigation and findings, the suggestions for avoidance (inspections, screening tests, proper part applications, requirements for manufacturer's plant facilities, etc.), and failure analysis procedures. Diodes, integrated circuits, and transistors are covered in this volume.

Variations upon a theme: Australian lizards provide insights into the endocrine control of vertebrate reproductive cycles.

Science.gov (United States)

Jones, Susan M

2017-04-01

Australian lizards exhibit a broad array of different reproductive strategies and provide an extraordinary diversity and range of models with which to address fundamental problems in reproductive biology. Studies on lizards have frequently led to new insights into hormonal regulatory pathways or mechanisms of control, but we have detailed knowledge of the reproductive cycle in only a small percentage of known species. This review provides an overview and synthesis of current knowledge of the hormonal control of reproductive cycles in Australian lizards. Agamid lizards have provided useful models with which to test hypotheses about the hormonal regulation of the expression of reproductive behaviors, while research on viviparous skinks is providing insights into the evolution of the endocrine control of gestation. However, in order to better understand the potential risks that environmental factors such as climate change and endocrine disrupting chemicals pose to our fauna, better knowledge is required of the fundamental characteristics of the reproductive cycle in a broader range of lizard species. Copyright © 2015 Elsevier Inc. All rights reserved.

FFTF control system experience

International Nuclear Information System (INIS)

Warrick, R.P.

1981-01-01

The FFTF control systems provide control equipment for safe and efficient operation of the plant. For convenience, these systems will be divided into three parts for discussions: (1) Plant Protection System (PPS); (2) Plant Control System (PCS); and (3) General Observations. Performance of each of these systems is discussed

Dissociative part-dependent resting-state activity in dissociative identity disorder: a controlled FMRI perfusion study.

Science.gov (United States)

Schlumpf, Yolanda R; Reinders, Antje A T S; Nijenhuis, Ellert R S; Luechinger, Roger; van Osch, Matthias J P; Jäncke, Lutz

2014-01-01

In accordance with the Theory of Structural Dissociation of the Personality (TSDP), studies of dissociative identity disorder (DID) have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part" (EP) and the "Apparently Normal Part" (ANP), have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors. Arterial spin labeling perfusion MRI was used to test the hypotheses that ANP and EP in DID have different perfusion patterns in response to rest instructions, and that perfusion is different in actors who were instructed to simulate ANP and EP. In a follow-up study, regional cerebral blood flow of DID patients was compared with the activation pattern of healthy non-simulating controls. Compared to EP, ANP showed elevated perfusion in bilateral thalamus. Compared to ANP, EP had increased perfusion in the dorsomedial prefrontal cortex, primary somatosensory cortex, and motor-related areas. Perfusion patterns for simulated ANP and EP were different. Fitting their reported role-play strategies, the actors activated brain structures involved in visual mental imagery and empathizing feelings. The follow-up study demonstrated elevated perfusion in the left temporal lobe in DID patients, whereas non-simulating healthy controls had increased activity in areas which mediate the mental construction of past and future episodic events. DID involves dissociative part-dependent resting-state differences. Compared to ANP, EP activated brain structures involved in self-referencing and sensorimotor actions more. Actors had different perfusion patterns compared to genuine ANP and EP. Comparisons of neural activity for individuals with DID and non-DID simulating controls suggest that the resting-state features of ANP and EP in DID are not due to imagination. The findings are consistent with TSDP and inconsistent with the idea

Dissociative part-dependent resting-state activity in dissociative identity disorder: a controlled FMRI perfusion study.

Directory of Open Access Journals (Sweden)

Yolanda R Schlumpf

Full Text Available In accordance with the Theory of Structural Dissociation of the Personality (TSDP, studies of dissociative identity disorder (DID have documented that two prototypical dissociative subsystems of the personality, the "Emotional Part" (EP and the "Apparently Normal Part" (ANP, have different biopsychosocial reactions to supraliminal and subliminal trauma-related cues and that these reactions cannot be mimicked by fantasy prone healthy controls nor by actors.Arterial spin labeling perfusion MRI was used to test the hypotheses that ANP and EP in DID have different perfusion patterns in response to rest instructions, and that perfusion is different in actors who were instructed to simulate ANP and EP. In a follow-up study, regional cerebral blood flow of DID patients was compared with the activation pattern of healthy non-simulating controls.Compared to EP, ANP showed elevated perfusion in bilateral thalamus. Compared to ANP, EP had increased perfusion in the dorsomedial prefrontal cortex, primary somatosensory cortex, and motor-related areas. Perfusion patterns for simulated ANP and EP were different. Fitting their reported role-play strategies, the actors activated brain structures involved in visual mental imagery and empathizing feelings. The follow-up study demonstrated elevated perfusion in the left temporal lobe in DID patients, whereas non-simulating healthy controls had increased activity in areas which mediate the mental construction of past and future episodic events.DID involves dissociative part-dependent resting-state differences. Compared to ANP, EP activated brain structures involved in self-referencing and sensorimotor actions more. Actors had different perfusion patterns compared to genuine ANP and EP. Comparisons of neural activity for individuals with DID and non-DID simulating controls suggest that the resting-state features of ANP and EP in DID are not due to imagination. The findings are consistent with TSDP and inconsistent

Simulations and Experiments on Vibration Control of Aerospace Thin-Walled Parts via Preload

Directory of Open Access Journals (Sweden)

Qiong Wu

2017-01-01

Full Text Available Thin-walled parts primarily comprise the entire piece of rough machining, and the material removal rate can surpass 95%. Numerous components with thin-walled structures are preferred in the aerospace industry for their light weight, high strength, and other advantages. In aerospace thin-walled workpiece machining processes and practical applications, they are excited by the vibration. The preload changing the modal stiffness of the part is found and this change causes continuous changes in the natural frequency. Researching on the influence of pretightening force on dynamic characteristics of thin-walled components is highly significant for controlling vibration. In this study, the typical aviation thin-walled part is the research object. Finite element numerical simulation and experimental verification are employed to analyze the dynamic characteristics of 7075 aluminum alloy thin-walled plates under different preloads for exploring the relationship between natural frequency and preload. The relationship is validated by comparative results. Both the simulation and experimental results show that the natural frequencies of plates increase following the augmentation of the preload. Thus, this research introduces the method where vibration of aerospace thin-walled parts is reduced by preload. For practical engineering application, a program showing the relationship between natural frequency and preload is written using Visual Basic language.

A ballistics module as a part of the fire control system

Directory of Open Access Journals (Sweden)

Branka R. Luković

2013-10-01

Full Text Available This article presents a ballistics module as a part of the fire control system of weapons for fire support (mortars, artillery weapons and rocket launchers. The software is "open" with the prominence of autonomy work. It can be modulated and adapted on the user demand. Moreover, it is independent of the hardware base. Introduction: The fire control system is based on a ballistic module (BM which determines the firing data for each weapon tool in the battery. Ballistic calculations, for the given position of the target in relation to the position of tools in the given weather conditions, determine firing data (elevation, direction, timing and locating devices so that the missile seems to cause the desired effect. This paper gives the basic information about the features the BM performs and the manner of their implementation in the fire control system without going into algorithmic solution procedures. Ballistic problem in the fire control system: Ballistic calculation is based on a trajectory calculation of all kinds of projectiles (current, time-fuze, illuminating, smoke, with conventional propulsion, rocket, with built-in gas generator, etc.. Instead of previous solutions, where a trajectory calculation of the fire control system was done by approximate methods, in this BM the trajectory calculation is made by the same model with the same data as for a weapon and ammunition in the process of creating a firing table. The data used in the fire control system are made simultaneously with the preparation of firing tables for a particular tool and associated ammunition,. A modified model of particle, standardized at the NATO level, is also used. Taking into account the meteorological situation, before the trajectory calculation is done, a relative position of the target in relation to the position of the tool should be determined. A selection or loading check is carried out (possibility of reaching a given target as well as the point at which the

Sterilization of health care products - Radiation. Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

International Nuclear Information System (INIS)

2006-01-01

A sterile medical device is one that is free of viable microorganisms. International Standards, which specify requirements for validation and routine control of sterilization processes, require, when it is necessary to supply a sterile medical device, that adventitious microbiological contamination of a medical device prior to sterilization be minimized. Even so, medical devices produced under standard manufacturing conditions in accordance with the requirements for quality management systems (see, for example, ISO 13485) may, prior to sterilization, have microorganisms on them, albeit in low numbers. Such medical devices are non-sterile. The purpose of sterilization is to inactivate the microbiological contaminants and thereby transform the nonsterile medical devices into sterile ones. The kinetics of inactivation of a pure culture of microorganisms by physical and/or chemical agents used to sterilize medical devices can generally best be described by an exponential relationship between the numbers of microorganisms surviving and the extent of treatment with the sterilizing agent; inevitably this means that there is always a finite probability that a microorganism may survive regardless of the extent of treatment applied. For a given treatment, the probability of survival is determined by the number and resistance of microorganisms and by the environment in which the organisms exist during treatment. It follows that the sterility of any one medical device in a population subjected to sterilization processing cannot be guaranteed and the sterility of a processed population is defined in terms of the probability of there being a viable microorganism present on a medical device. This part of ISO 11137 describes requirements that, if met, will provide a radiation sterilization process intended to sterilize medical devices, that has appropriate microbicidal activity. Furthermore, compliance with the requirements ensures that this activity is both reliable and

Use of statistic control of the process as part of a quality assurance plan; Empleo del control estadistico de proceso como parte de un plan de aseguramiento de la calidad

Energy Technology Data Exchange (ETDEWEB)

Acosta, S.; Lewis, C., E-mail: sacosta@am.gob.ar [Autoridad Regulatoria Nuclear (ARN), Buenos Aires (Argentina)

2013-07-01

One of the technical requirements of the standard IRAM ISO 17025 for the accreditation of testing laboratories, is the assurance of the quality of the results through the control and monitoring of the factors influencing the reliability of them. The grade the factors contribute to the total measurement uncertainty, determines which of them should be considered when developing a quality assurance plan. The laboratory of environmental measurements of strontium-90 in the accreditation process, performs most of its determinations in samples with values close to the detection limit. For this reason the correct characterization of the white, is a critical parameter and is verified through a letter for statistical process control. The scope of the present work is concerned the control of whites and so it was collected a statistically significant amount of data, for a period of time that is covered of different conditions. This allowed consider significant variables in the process, such as temperature and humidity, and build a graph of white control, which forms the basis of a statistical process control. The data obtained were lower and upper limits for the preparation of the charter white control. In this way the process of characterization of white was considered to operate under statistical control and concludes that it can be used as part of a plan of insurance of the quality.

Solution of task related to control of swiss-type automatic lathe to get planes parallel to part axis

Science.gov (United States)

Tabekina, N. A.; Chepchurov, M. S.; Evtushenko, E. I.; Dmitrievsky, B. S.

2018-05-01

The work solves the problem of automation of machining process namely turning to produce parts having the planes parallel to an axis of rotation of part without using special tools. According to the results, the availability of the equipment of a high speed electromechanical drive to control the operative movements of lathe machine will enable one to get the planes parallel to the part axis. The method of getting planes parallel to the part axis is based on the mathematical model, which is presented as functional dependency between the conveying velocity of the driven element and the time. It describes the operative movements of lathe machine all over the tool path. Using the model of movement of the tool, it has been found that the conveying velocity varies from the maximum to zero value. It will allow one to carry out the reverse of the drive. The scheme of tool placement regarding the workpiece has been proposed for unidirectional movement of the driven element at high conveying velocity. The control method of CNC machines can be used for getting geometrically complex parts on the lathe without using special milling tools.

Atomic Energy Control Board 1991-92 estimates part III expenditure plan

International Nuclear Information System (INIS)

1991-01-01

This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program's financial performance over the past year. 22 figs

Atomic Energy Control Board 1991-92 estimates part III expenditure plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program`s financial performance over the past year. 22 figs.

Atomic Energy Control Board 1992-93 estimates part III expenditure plan

International Nuclear Information System (INIS)

1992-01-01

This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program's financial performance over the past year. 7 refs., 21 figs

Atomic Energy Control Board 1992-93 estimates part III expenditure plan

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This Expenditure Plan is designed to be used as a reference document. As such, it contains several levels of detail to respond to the various needs of its audience. This Plan is divided into two sections. Section 1 presents an overview of the Program including a description, information on its background, objectives and planning perspective as well as performance information that forms the basis for the resources requested. Section 2 provides further information on costs and resources as well as special analyses that the reader may require to understand the Program more fully. Section 1 is preceded by details of Spending Authorities from Part 2 of the Estimates and Volume 2 of the Public Accounts. This is to provide continuity with other Estimates documents and to help in assessing the Program`s financial performance over the past year. 7 refs., 21 figs.

Maintenance Centered Service Parts Inventory Control

NARCIS (Netherlands)

W.L. van Jaarsveld (Willem)

2013-01-01

textabstractHigh-tech capital goods enable the production of many services and articles that have become a part of our daily lives. Examples include the refineries that produce the gasoline we put in our cars, the photolithography systems that enable the production of the chips in our cell phones

A circular feature-based pose measurement method for metal part grasping

International Nuclear Information System (INIS)

Wu, Chenrui; He, Zaixing; Zhang, Shuyou; Zhao, Xinyue

2017-01-01

The grasping of circular metal parts such as bearings and flanges is a common task in industry. Limited by low texture and repeated features, the point-feature-based method is not applicable in pose measurement of these parts. In this paper, we propose a novel pose measurement method for grasping circular metal parts. This method is based on cone degradation and involves a monocular camera. To achieve higher measurement accuracy, a position-based visual servoing method is presented to continuously control an eye-in-hand, six-degrees-of-freedom robot arm to grasp the part. The uncertainty of the part’s coordinate frame during the control process is solved by defining a fixed virtual coordinate frame. Experimental results are provided to illustrate the effectiveness of the proposed method and the factors that affect measurement accuracy are analyzed. (paper)

Providing for energy efficiency in homes and small buildings. Part III. Determining which practices are most effective and installing materials

Energy Technology Data Exchange (ETDEWEB)

None

1980-06-01

The training program is designed to educate students and individuals in the importance of conserving energy and to provide for developing skills needed in the application of energy-saving techniques that result in energy-efficient buildings. A teacher guide and student workbook are available to supplement the basic manual. Subjects covered in Part III are: determining which practices are most efficient and economical; installing energy-saving materials; and improving efficiency of equipment.

Electric vehicle battery charging controller

DEFF Research Database (Denmark)

2016-01-01

The present invention provides an electric vehicle charging controller. The charging controller comprises a first interface connectable to an electric vehicle charge source for receiving a charging current, a second interface connectable to an electric vehicle for providing the charging current...... to a battery management system in the electric vehicle to charge a battery therein, a first communication unit for receiving a charging message via a communication network, and a control unit for controlling a charging current provided from the charge source to the electric vehicle, the controlling at least...... in part being performed in response to a first information associated with a charging message received by the first communication unit...

Case Study: A Bio-Inspired Control Algorithm for a Robotic Foot-Ankle Prosthesis Provides Adaptive Control of Level Walking and Stair Ascent

Directory of Open Access Journals (Sweden)

Uzma Tahir

2018-04-01

Full Text Available Powered ankle-foot prostheses assist users through plantarflexion during stance and dorsiflexion during swing. Provision of motor power permits faster preferred walking speeds than passive devices, but use of active motor power raises the issue of control. While several commercially available algorithms provide torque control for many intended activities and variations of terrain, control approaches typically exhibit no inherent adaptation. In contrast, muscles adapt instantaneously to changes in load without sensory feedback due to the intrinsic property that their stiffness changes with length and velocity. We previously developed a “winding filament” hypothesis (WFH for muscle contraction that accounts for intrinsic muscle properties by incorporating the giant titin protein. The goals of this study were to develop a WFH-based control algorithm for a powered prosthesis and to test its robustness during level walking and stair ascent in a case study of two subjects with 4–5 years of experience using a powered prosthesis. In the WFH algorithm, ankle moments produced by virtual muscles are calculated based on muscle length and activation. Net ankle moment determines the current applied to the motor. Using this algorithm implemented in a BiOM T2 prosthesis, we tested subjects during level walking and stair ascent. During level walking at variable speeds, the WFH algorithm produced plantarflexion angles (range = −8 to −19° and ankle moments (range = 1 to 1.5 Nm/kg similar to those produced by the BiOM T2 stock controller and to people with no amputation. During stair ascent, the WFH algorithm produced plantarflexion angles (range −15 to −19° that were similar to persons with no amputation and were ~5 times larger on average at 80 steps/min than those produced by the stock controller. This case study provides proof-of-concept that, by emulating muscle properties, the WFH algorithm provides robust, adaptive control of level walking at

Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

Science.gov (United States)

Vollmer, R.; Palm, C.

2017-09-01

The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

Stimulus control: Part I

OpenAIRE

Dinsmoor, James A.

1995-01-01

In his effort to distinguish operant from respondent conditioning, Skinner stressed the lack of an eliciting stimulus and rejected the prevailing stereotype of Pavlovian “stimulus—response” psychology. But control by antecedent stimuli, whether classified as conditional or discriminative, is ubiquitous in the natural setting. With both respondent and operant behavior, symmetrical gradients of generalization along unrelated dimensions may be obtained following differential reinforcement in the...

Radiological Control Manual

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

Radiological Control Manual

International Nuclear Information System (INIS)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records

Rural providers' access to online resources: a randomized controlled trial

Science.gov (United States)

Hall, Laura J.; McElfresh, Karen R.; Warner, Teddy D.; Stromberg, Tiffany L.; Trost, Jaren; Jelinek, Devin A.

2016-01-01

Objective The research determined the usage and satisfaction levels with one of two point-of-care (PoC) resources among health care providers in a rural state. Methods In this randomized controlled trial, twenty-eight health care providers in rural areas were stratified by occupation and region, then randomized into either the DynaMed or the AccessMedicine study arm. Study participants were physicians, physician assistants, and nurses. A pre- and post-study survey measured participants' attitudes toward different information resources and their information-seeking activities. Medical student investigators provided training and technical support for participants. Data analyses consisted of analysis of variance (ANOVA), paired t tests, and Cohen's d statistic to compare pre- and post-study effects sizes. Results Participants in both the DynaMed and the AccessMedicine arms of the study reported increased satisfaction with their respective PoC resource, as expected. Participants in both arms also reported that they saved time in finding needed information. At baseline, both arms reported too little information available, which increased to “about right amounts of information” at the completion of the study. DynaMed users reported a Cohen's d increase of +1.50 compared to AccessMedicine users' reported use of 0.82. DynaMed users reported d2 satisfaction increases of 9.48 versus AccessMedicine satisfaction increases of 0.59 using a Cohen's d. Conclusion Participants in the DynaMed arm of the study used this clinically oriented PoC more heavily than the users of the textbook-based AccessMedicine. In terms of user satisfaction, DynaMed users reported higher levels of satisfaction than the users of AccessMedicine. PMID:26807050

78 FR 19949 - The $500,000 Deduction Limitation for Remuneration Provided by Certain Health Insurance Providers

Science.gov (United States)

2013-04-02

... 26 CFR Part 1 The $500,000 Deduction Limitation for Remuneration Provided by Certain Health Insurance... limitation for remuneration provided by certain health insurance providers under section 162(m)(6) of the Internal Revenue Code (Code). These regulations affect health insurance providers that pay such...

The control of a free-piston engine generator. Part 2: Engine dynamics and piston motion control

Energy Technology Data Exchange (ETDEWEB)

Mikalsen, R.; Roskilly, A.P. [Sir Joseph Swan Institute for Energy Research, Newcastle University, Newcastle upon Tyne, NE1 7RU England (United Kingdom)

2010-04-15

Free-piston engines are under investigation by a number of research groups due to potential fuel efficiency and exhaust emissions advantages over conventional technology. The main challenge with such engines is the control of the piston motion, and this has not yet been fully resolved for all types of free-piston engines. This paper builds on the fundamental investigations presented in the accompanying paper and investigates the dynamics of the engine and the feasibility of classical control approaches. The response of the engine to rapid load changes are investigated using decentralised PID, PDF and disturbance feedforward. It is found that the engine is sensitive to rapid load changes but that in constant power applications standard control techniques provide satisfactory performance. The influence of cycle-to-cycle variations in the combustion process are investigated, but not found to be critical for engine operation. (author)

Challenges to Providing a Successful Central Configuration Service to Support CERN’s New Controls Diagnostics and Monitoring System

CERN Document Server

Makonnen, Z; Zaharieva, Z

2014-01-01

The Controls Diagnostic and Monitoring service (DIAMON) provides monitoring and diagnostics tools to the operators in the CERN Control Centre. A recent reengineering presented the opportunity to restructure its data management and to integrate it with the central Controls Configuration Service (CCS). The CCS provides the Configuration Management for the Controls System for all accelerators at CERN. The new facility had to cater for the configuration management of all agents monitored by DIAMON, (>3000 computers of different types), provide deployment information, relations between metrics, and historical information. In addition, it had to be integrated into the operational CCS, while ensuring stability and data coherency. An important design decision was to largely reuse the existing infrastructure in the CCS and adapt the DIAMON data management to it e.g. by using the device/property model through a Virtual Devices framework to model the DIAMON agents. This article will show how these challenging requiremen...

Working and Providing Care: Increasing Student Engagement for Part-Time Community College Students

Science.gov (United States)

Leingang, Daniel James

2017-01-01

The purpose of this study was to examine the relationship among external time obligations of work and care giving by part-time students, their participation within structured group learning experiences, and student engagement. The Structured Group Learning Experiences (SGLEs) explored within this study include community college programming…

Space and Missile Systems Center Standard: Parts, Materials, and Processes Control Program for Space Vehicles

Science.gov (United States)

2013-04-12

preparation , implementation, and operation of a Parts, Materials, and Processes (PMP) control program for use during the design, development...Processes List CDR Critical Design Review CDRL Contract Data Requirements List CMOS Complementary Metal Oxide Semiconductor CONOPS Concept of Operations...Failure Review Board GFE Government Furnished Equipment GIDEP Government Industry Data Exchange Program HBT Heterojunction Bipolar Transistor IPT

Centralised gaming models: providing optimal gambling behaviour controls

OpenAIRE

Griffiths, MD; Wood, RTA

2009-01-01

The expansion in the gaming industry and its widening attraction points to the need for ever more verifiable means of controlling problem gambling. Various strategies have been built into casino venue operations to address this, but recently, following a new focus on social responsibility, a group of experts considered the possibilities of a centralised gaming model as a more effective control mechanism for dealing with gambling behaviours.

Magnitude and Variability of Controllable Charge Capacity Provided by Grid Connected Plug-in Electric Vehicles

Energy Technology Data Exchange (ETDEWEB)

Scoffield, Don R [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smart, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); Salisbury, Shawn [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-03-01

As market penetration of plug-in electric vehicles (PEV) increases over time, the number of PEVs charging on the electric grid will also increase. As the number of PEVs increases, their ability to collectively impact the grid increases. The idea of a large body of PEVs connected to the grid presents an intriguing possibility. If utilities can control PEV charging, it is possible that PEVs could act as a distributed resource to provide grid services. The technology required to control charging is available for modern PEVs. However, a system for wide-spread implementation of controllable charging, including robust communication between vehicles and utilities, is not currently present. Therefore, the value of controllable charging must be assessed and weighed against the cost of building and operating such as system. In order to grasp the value of PEV charge control to the utility, the following must be understood: 1. The amount of controllable energy and power capacity available to the utility 2. The variability of the controllable capacity from day to day and as the number of PEVs in the market increases.

A Mathematical Formulation of the SCOLE Control Problem. Part 2: Optimal Compensator Design

Science.gov (United States)

Balakrishnan, A. V.

1988-01-01

The study initiated in Part 1 of this report is concluded and optimal feedback control (compensator) design for stability augmentation is considered, following the mathematical formulation developed in Part 1. Co-located (rate) sensors and (force and moment) actuators are assumed, and allowing for both sensor and actuator noise, stabilization is formulated as a stochastic regulator problem. Specializing the general theory developed by the author, a complete, closed form solution (believed to be new with this report) is obtained, taking advantage of the fact that the inherent structural damping is light. In particular, it is possible to solve in closed form the associated infinite-dimensional steady-state Riccati equations. The SCOLE model involves associated partial differential equations in a single space variable, but the compensator design theory developed is far more general since it is given in the abstract wave equation formulation. The results thus hold for any multibody system so long as the basic model is linear.

A Keystone Ant Species Provides Robust Biological Control of the Coffee Berry Borer Under Varying Pest Densities.

Science.gov (United States)

Morris, Jonathan R; Vandermeer, John; Perfecto, Ivette

2015-01-01

Species' functional traits are an important part of the ecological complexity that determines the provisioning of ecosystem services. In biological pest control, predator response to pest density variation is a dynamic trait that impacts the provision of this service in agroecosystems. When pest populations fluctuate, farmers relying on biocontrol services need to know how natural enemies respond to these changes. Here we test the effect of variation in coffee berry borer (CBB) density on the biocontrol efficiency of a keystone ant species (Azteca sericeasur) in a coffee agroecosystem. We performed exclosure experiments to measure the infestation rate of CBB released on coffee branches in the presence and absence of ants at four different CBB density levels. We measured infestation rate as the number of CBB bored into fruits after 24 hours, quantified biocontrol efficiency (BCE) as the proportion of infesting CBB removed by ants, and estimated functional response from ant attack rates, measured as the difference in CBB infestation between branches. Infestation rates of CBB on branches with ants were significantly lower (71%-82%) than on those without ants across all density levels. Additionally, biocontrol efficiency was generally high and did not significantly vary across pest density treatments. Furthermore, ant attack rates increased linearly with increasing CBB density, suggesting a Type I functional response. These results demonstrate that ants can provide robust biological control of CBB, despite variation in pest density, and that the response of predators to pest density variation is an important factor in the provision of biocontrol services. Considering how natural enemies respond to changes in pest densities will allow for more accurate biocontrol predictions and better-informed management of this ecosystem service in agroecosystems.

Part-Time Faculty Satisfaction at Two-Year Public Postsecondary Institutions: A Comparison of Involuntary Part-Time, Voluntary Part-Time, and Full-Time Faculty

Science.gov (United States)

Kinchen, Nancy Huval

2010-01-01

Part-time faculty members represent the majority of faculty at public two-year postsecondary institutions. Utilizing part-time faculty enables two-year institutions to control their instructional costs and maintain scheduling flexibility. However, part-time faculty are diverse in regards to their employment preference, some prefer part-time…

Control of tomato bacterial wilt through the incorporation of aerial part of pigeon pea and crotalaria to soil Controle da murcha bacteriana do tomateiro pela incorporação da parte aérea de guandu e crotalária no solo

Directory of Open Access Journals (Sweden)

Suane C. Cardoso

2006-03-01

Full Text Available The use of organic matter that improves the physical, chemical and biological soil properties has been studied as an inducer of suppressiveness to soilborne plant pathogens. The objective of this work was to evaluate the effect of different sources and concentrations of organic matter on tomato bacterial wilt control. Two commercially available organic composts and freshly cut aerial parts of pigeon pea (Cajanus cajan and crotalaria (Crotalaria juncea were incorporated, in concentrations of 10, 20 and 30 % (v/v, into soil infested with Ralstonia solanacearum. The soil with the fresh organic matter of pigeon pea and crotalaria was incubated for 30 and 60 days before planting. Tomato seedlings of cv. Santa Clara were transplanted into polyethylene bags with 3 kg of the planting substrate (infested soil + organic matter. The wilting symptoms and percentage of flowering plants were evaluated for 45 days. All evaluated concentrations with incorporation and incubation for 30 days of aerial parts of pigeon pea and crotalaria controlled 100% tomato bacterial wilt. With 60 days of incubation, only the 10 % concentration of pigeon pea and crotalaria did not control the disease. These results suggest that soil incorporation of fresh aerial parts of pigeon pea and crotalaria is an effective method for bacterial wilt control.A utilização de materiais orgânicos que melhoram as características físicas, químicas e biológicas do solo vem sendo estudada como indutora de supressividade a fitopatógenos habitantes do solo. Este trabalho teve como objetivo avaliar o efeito de diferentes fontes e concentrações de matéria orgânica no controle da murcha bacteriana do tomateiro. Foram avaliados dois compostos orgânicos comerciais e a matéria fresca cortada da parte aérea de guandu (Cajanus cajan e de crotalária (Crotalaria juncea, nas concentrações 10, 20 e 30 % (v/v, incorporados no solo infestado com Ralstonia solanacearum. O solo que recebeu a parte

Margins of safety provided by COSHH Essentials and the ILO Chemical Control Toolkit.

Science.gov (United States)

Jones, Rachael M; Nicas, Mark

2006-03-01

COSHH Essentials, developed by the UK Health and Safety Executive, and the Chemical Control Toolkit (Toolkit) proposed by the International Labor Organization, are 'control banding' approaches to workplace risk management intended for use by proprietors of small and medium-sized businesses. Both systems group chemical substances into hazard bands based on toxicological endpoint and potency. COSSH Essentials uses the European Union's Risk-phrases (R-phrases), whereas the Toolkit uses R-phrases and the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals. Each hazard band is associated with a range of airborne concentrations, termed exposure bands, which are to be attained by the implementation of recommended control technologies. Here we analyze the margin of safety afforded by the systems and, for each hazard band, define the minimal margin as the ratio of the minimum airborne concentration that produced the toxicological endpoint of interest in experimental animals to the maximum concentration in workplace air permitted by the exposure band. We found that the minimal margins were always occupational exposure limits, we argue that the minimal margins are better indicators of health protection. Further, given the small margins observed, we feel it is important that revisions of these systems provide the exposure bands to users, so as to permit evaluation of control technology capture efficiency.

A critical spare part inventory control based on hazard function approach: A case study in a garment company

Science.gov (United States)

Melinda, Intan Dewi; Jauhari, Wakhid Ahmad

2018-02-01

Spare part procurement is a complex issue and requires an accurate analysis. Stock outs of spare part can leads a great impact on production. Therefore, it is necessary to design the inventory control of spare parts that guarantee the availability of spare parts needed for supporting the maintenance activity. This paper studies the inventory policy for sewing machine spare part using hazard function to approximate the demand. Hazard function is the indicator of the effect of ageing on the reliability of the system. It quantifies the risk of failure as the age of the system increases. We use a continuous review policy based on Hadley Within Approach to calculate the optimum inventory level for critical spare parts. There are four spare parts categorized as critical spare parts, which are needle plate, feed dog, rotary and binder attachment. The optimal ordering quantity for needle plate, feed, rotary and binder attachment are 5 units, 17 units, 5 units, and 9 units, respectively and the reorder point are 2 units, 1 unit, 2 units and 1 unit, respectively. Finally, the service level achieved by the proposed policy is in a range of 95.91%-97.93%, which indicates that the inventory level of spare parts can be used to support the required parts in the maintenance activity.

Use of statistic control of the process as part of a quality assurance plan

International Nuclear Information System (INIS)

Acosta, S.; Lewis, C.

2013-01-01

One of the technical requirements of the standard IRAM ISO 17025 for the accreditation of testing laboratories, is the assurance of the quality of the results through the control and monitoring of the factors influencing the reliability of them. The grade the factors contribute to the total measurement uncertainty, determines which of them should be considered when developing a quality assurance plan. The laboratory of environmental measurements of strontium-90 in the accreditation process, performs most of its determinations in samples with values close to the detection limit. For this reason the correct characterization of the white, is a critical parameter and is verified through a letter for statistical process control. The scope of the present work is concerned the control of whites and so it was collected a statistically significant amount of data, for a period of time that is covered of different conditions. This allowed consider significant variables in the process, such as temperature and humidity, and build a graph of white control, which forms the basis of a statistical process control. The data obtained were lower and upper limits for the preparation of the charter white control. In this way the process of characterization of white was considered to operate under statistical control and concludes that it can be used as part of a plan of insurance of the quality

Controle Remoto: principio de funcionamento (parte 1 de 2

Directory of Open Access Journals (Sweden)

Marisa Almeida Cavalcante

2013-10-01

Full Text Available http://dx.doi.org/10.5007/2175-7941.2013v30n3p554 Este trabalho tem como principal objetivo a difusão da utilização do micro-controlador Arduino, no ensino e aprendizagem de Física Moderna. Para isso, elaboramos uma sequência didática com o objetivo de explorar o funcionamento de controles remoto. Esta sequência será apresentada em dois módulos; o primeiro deles destinado ao estudo dos fenômenos físicos envolvidos na transmissão de sinais sem fio por meio de radiação infravermelha e, que será objeto desta 1ª parte do artigo. O segundo módulo destinado à compreensão do modelo associado à lógica e interpretação dos sinais pelo receptor infravermelho. Para este último, atividades são desenvolvidas acoplando o receptor IR da serie PNA4601M ao micro-controlador Arduino, que interpreta e executa ações a partir dos códigos recebidos. Todos os experimentos propostos nestes módulos visam tornar possível a compreensão não apenas do funcionamento de um controle remoto, mas de todo o processo de comunicação envolvido e dos diferentes comandos/códigos advindos de cada tecla. Pretendemos, com isso, explorar conceitos de física a partir de instrumentos e aplicações tecnológicas presentes no dia a dia dos estudantes, tornando as aulas de Física mais dinâmicas e motivadoras.

Price control and macromarketing

Directory of Open Access Journals (Sweden)

Kancir Rade

2003-01-01

Full Text Available Price control at macro level is part of integral macro marketing strategic control system, or more precisely, part of social marketing mix control. Price impact is direct, if it is regarded in the context of needs satisfaction, and indirect, within the context of resource allocation. These two patterns of price impact define control mechanism structuring. Price control in sense of its direct impact at process of need satisfaction should comprise qualitative and quantitative level of needs satisfaction at a given price level and its structure, informational dimension of price and different disputable forms of corporate pricing policies. Control of price allocation function is based at objectives of macro marketing system management in the area of resource allocation and the role of price as allocator in contemporary market economies. Control process is founded, on one hand, at theoretical models of correlation between price and demand in different market structures, and on the other hand, at complex limits that price as allocator has, and which make whole control process even more complex because of reduction of the degree of determinism in functioning of contemporary economic systems. Control of price allocation function must be continuous and dynamic process if it is to provide for convergence with environmental changes and if it is to provide for placing control systems at micro marketing levels in the function of socially valid objectives.

Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This practice sets forth requirements to ensure consistency in neutron-induced displacement damage testing of silicon and gallium arsenide electronic piece parts. This requires controls on facility, dosimetry, tester, and communications processes that affect the accuracy and reproducibility of these tests. It provides background information on the technical basis for the requirements and additional recommendations on neutron testing. In addition to neutrons, reactors are used to provide gamma-ray pulses of intensities and durations that are not achievable elsewhere. This practice also provides background information and recommendations on gamma-ray testing of electronics using nuclear reactors. 1.2 Methods are presented for ensuring and validating consistency in neutron displacement damage testing of electronic parts such as integrated circuits, transistors, and diodes. The issues identified and the controls set forth in this practice address the characterization and suitability of the radiation environm...

Electronically Controlled Resistor Bank

Science.gov (United States)

Ross, Walter L.

1987-01-01

Resistance quickly varied in small steps over wide range. Device with no moving parts provides variable electrical resistance. Used with analog or digital circuity to provide electronic selection of large number of resistance values for testing, simulation, control, or other purposes. Nearest electromechanical equivalent of all-electronic device is potentiometer driven by servomotor.

Health-related effects of early part-time sick leave due to musculoskeletal disorders: a randomized controlled trial.

Science.gov (United States)

Shiri, Rahman; Kausto, Johanna; Martimo, Kari-Pekka; Kaila-Kangas, Leena; Takala, Esa-Pekka; Viikari-Juntura, Eira

2013-01-01

Previously we reported that early part-time sick leave enhances return to work (RTW) among employees with musculoskeletal disorders (MSD). This paper assesses the health-related effects of this intervention. Patients aged 18-60 years who were unable to perform their regular work due to MSD were randomized to part- or full-time sick leave groups. In the former, workload was reduced by halving working time. Using validated questionnaires, we assessed pain intensity and interference with work and sleep, region-specific disability due to MSD, self-rated general health, health-related quality of life (measured via EuroQol), productivity loss, depression, and sleep disturbance at baseline, 1, 3, 8, 12, and 52 weeks. We analyzed the repeated measures data (171-356 observations) with the generalized estimating equation approach. The intervention (part-time sick leave) and control (full-time sick leave) groups did not differ with regard to pain intensity, pain interference with work and sleep, region-specific disability, productivity loss, depression, or sleep disturbance. The intervention group reported better self-rated general health (adjusted P=0.07) and health-related quality of life (adjusted P=0.02) than the control group. In subgroup analyses, the intervention was more effective among the patients whose current problem began occurring part-time sick leave did not exacerbate pain-related symptoms and functional disability, but improved self-rated general health and health-related quality of life in the early stage of work disability due to MSD.

Cell control report

CERN Document Server

2013-01-01

Please note this is a Short Discount publication. This extensive report provides an essential overview of cells and their use as factory automation building blocks. The following issues are discussed in depth: Cell integration Cell software and standards Future technologies applied to cells Plus Cell control applications including: - rotary parts manufacturing - diesel engine component development - general cell control development at the General Electric Corporation - a vendor list.

Effectiveness of Provider and Community Interventions to Improve Treatment of Uncomplicated Malaria in Nigeria: A Cluster Randomized Controlled Trial.

Directory of Open Access Journals (Sweden)

Obinna Onwujekwe

Full Text Available The World Health Organization recommends that malaria be confirmed by parasitological diagnosis before treatment using Artemisinin-based Combination Therapy (ACT. Despite this, many health workers in malaria endemic countries continue to diagnose malaria based on symptoms alone. This study evaluates interventions to help bridge this gap between guidelines and provider practice. A stratified cluster-randomized trial in 42 communities in Enugu state compared 3 scenarios: Rapid Diagnostic Tests (RDTs with basic instruction (control; RDTs with provider training (provider arm; and RDTs with provider training plus a school-based community intervention (provider-school arm. The primary outcome was the proportion of patients treated according to guidelines, a composite indicator requiring patients to be tested for malaria and given treatment consistent with the test result. The primary outcome was evaluated among 4946 (93% of the 5311 patients invited to participate. A total of 40 communities (12 in control, 14 per intervention arm were included in the analysis. There was no evidence of differences between the three arms in terms of our composite indicator (p = 0.36: stratified risk difference was 14% (95% CI -8.3%, 35.8%; p = 0.26 in the provider arm and 1% (95% CI -21.1%, 22.9%; p = 0.19 in the provider-school arm, compared with control. The level of testing was low across all arms (34% in control; 48% provider arm; 37% provider-school arm; p = 0.47. Presumptive treatment of uncomplicated malaria remains an ingrained behaviour that is difficult to change. With or without extensive supporting interventions, levels of testing in this study remained critically low. Governments and researchers must continue to explore alternative ways of encouraging providers to deliver appropriate treatment and avoid the misuse of valuable medicines.ClinicalTrials.gov NCT01350752.

Reaching the unreachable: providing STI control services to female sex workers via mobile team outreach.

Directory of Open Access Journals (Sweden)

Pablo E Campos

Full Text Available As part of a community-randomized trial of a multicomponent intervention to prevent sexually transmitted infections, we created Mobile Teams (MTs in ten intervention cities across Peru to improve outreach to female sex workers (FSW for strengthened STI prevention services.Throughout 20 two-month cycles, MTs provided counseling; condoms; screening and specific treatment for Neisseria gonorrhoeae (NG, Chlamydia trachomatis (CT, and vaginal Trichomonas vaginalis (TV infections; and periodic presumptive metronidazole treatment for vaginal infections.MTs had 48,207 separate encounters with 24,814 FSW; numbers of sex work venues and of FSW reached increased steadily over several cycles. Approximately 50% of FSW reached per cycle were new. Reported condom use with last client increased from 73% to 93%. Presumptive metronidazole treatment was accepted 83% of times offered. Over 38 months, CT prevalence declined from 15.4% to 8.2%, and TV prevalence from 7.3% to 2.6%. Among participants in ≥ 9 cycles, CT prevalence decreased from 12.9% to 6.0% (p <0.001; TV from 4.6% to 1.5% (p <0.001; and NG from 0.8% to 0.4% (p = 0.07.Mobile outreach to FSW reached many FSW not utilizing government clinics. Self-reported condom use substantially increased; CT and TV prevalences declined significantly. The community-randomized trial, reported separately, demonstrated significantly greater reductions in composite prevalence of CT, NG, TV, or high-titer syphilis serology in FSW in these ten intervention cities than in ten matched control cities.

Anesthesia and ventilation strategies in children with asthma: part II - intraoperative management.

Science.gov (United States)

Regli, Adrian; von Ungern-Sternberg, Britta S

2014-06-01

As asthma is a frequent disease especially in children, anesthetists are increasingly providing anesthesia for children requiring elective surgery with well controlled asthma but also for those requiring urgent surgery with poorly controlled or undiagnosed asthma. This second part of this two-part review details the medical and ventilatory management throughout the perioperative period in general but also includes the perioperative management of acute bronchospasm and asthma exacerbations in children with asthma. Multiple observational trials assessing perioperative respiratory adverse events in healthy and asthmatic children provide the basis for identifying risk reduction strategies. Mainly, animal experiments and to a small extent clinical data have advanced our understanding of how anesthetic agents effect bronchial smooth muscle tone and blunt reflex bronchoconstriction. Asthma treatment outside anesthesia is well founded on a large body of evidence.Perioperative prevention strategies have increasingly been studied. However, evidence on the perioperative management, including mechanical ventilation strategies of asthmatic children, is still only fair, and further research is required. To minimize the considerable risk of perioperative respiratory adverse events in asthmatic children, perioperative management should be based on two main pillars: the preoperative optimization of asthma treatment (please refer to the first part of this two-part review) and - the focus of this second part of this review - the optimization of anesthesia management in order to optimize lung function and minimize bronchial hyperreactivity in the perioperative period.

Semimanufacture intended to be mounted on a vibrating wall or a vibrating panel for actively damping vibrations of the wall, wall or panel provided with such semimanufacture, system provided with a semimanufacture and a control unit, wall or panel provided with a control unit and method for damping audible vibrations of a wall or panel

NARCIS (Netherlands)

de Goeje, Marius; van Overbeek, Michiel Wilbert R.M.; van der Waal, Adri; Berkhoff, Arthur P.; Nederveen, Peter J.

2005-01-01

A semimanufacture intended to be mounted on a vibrating wall or a vibrating panel for actively damping the vibrations in the wall or the panel with frequencies which are at least partly audible, wherein the semimanufacture is provided with a plate wherein the plate is integrated with: at least one

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2

Science.gov (United States)

Jones, Gregory S. (Editor); Joslin, Ronald D. (Editor)

2005-01-01

This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC

Randomized, Controlled Trial to Examine the Impact of Providing Yogurt to Women Enrolled in WIC

Science.gov (United States)

Fung, Ellen B.; Ritchie, Lorrene D.; Walker, Brent H.; Gildengorin, Ginny; Crawford, Patricia B.

2010-01-01

Objective: Examine the impact of providing yogurt to women enrolled in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC). Design: Randomized, controlled intervention trial. Setting: Two California WIC local agency sites. Participants: 511 pregnant, breast-feeding, or postpartum women. Intervention: Substitution of…

Nectar accessibility determines fitness, flower choice and abundance of hoverflies that provide natural pest control

NARCIS (Netherlands)

van Rijn, Paul C. J.; Wäckers, Felix L.

2016-01-01

In modern agricultural landscapes, many organisms providing ecosystem services such as pollination and natural pest control are likely constrained by shortage of nectar and/or pollen required for adult nutrition. More and more flower-rich field margin strips and other habitats are created to

Nectar accessibility determines fitness, flower choice and abundance of hoverflies that provide natural pest control

NARCIS (Netherlands)

van Rijn, P.C.J.; Wäckers, F.L.

2016-01-01

1. In modern agricultural landscapes, many organisms providing ecosystem services such as pollination and natural pest control are likely constrained by shortage of nectar and/or pollen required for adult nutrition. More and more flower-rich field margin strips and other habitats are created to

What is WHMIS? Part One

Energy Technology Data Exchange (ETDEWEB)

Matthew, M. A.

2003-07-01

Essential features of the Workplace Hazardous Materials Information System (WHMIS) are outlined. WHMIS was introduced by the federal government in 1988, followed in quick succession by specific regulations by the provinces and territories. The WHMIS regulations set out what an employer must do to comply to ensure that controlled products are used, handled, and/or disposed of in the workplace are labelled, that employees are fully trained on the safe use, handling, storage and disposal of all controlled products, and that a material safety data sheet (MSDS) that describes each product is available on site for employees. The controlled products regulation (CPR) which is separate from the WHMIS regulations sets the specific requirements for product labelling for suppliers and importers. Controlled products are categorized in four classes and various subclasses, such as flammable/combustible materials, oxidizing materials, materials of immediate and serious toxic effects, corrosive materials, etc. Part Two of this article will explain supplier versus workplace labels, the content of the material data sheets and will provide details about employee training methods.

Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints

International Nuclear Information System (INIS)

Costantino, Francesco; Di Gravio, Giulio; Tronci, Massimo

2013-01-01

Inventory management of spare parts is one of the most critical issues in the aeronautical industry, given the required level of system availability related to the strategic importance and high stocking costs of the components. Even if a large number of spare parts increases warehousing costs, every single shortage have a greater impact: the adoption of best-in-class inventory management techniques becomes crucial. On these considerations, the paper presents an innovative model of spare parts allocation for the Italian Air Force with the aim of minimizing backorders and, at the same time, ensuring an availability of 99% depending on the actual flight plan. The model, solved by a marginal analysis, considers an original configuration of features combining different skills of maintenance centers in a hierarchical multi-echelon, multi-item, multi-indenture structure. A real case is provided in order to analyze the solving method and the results. -- Highlights: •We studied a problem of allocations for spare parts of aeronautical systems. •The model presents different repair capabilities of maintenance centers. •The model fits constraints on budget and on total operational availability. •The model is solved by a marginal analysis with a backorder/price ratio. •A numerical example shows a spare parts allocation with relative considerations

Management review of nuclear material control and accounting systems

International Nuclear Information System (INIS)

1975-06-01

Section 70.58, ''Fundamental Nuclear Material Controls,'' of 10 CFR Part 70, ''Special Nuclear Materials,'' requires, in paragraph 70.58(c), that certain licensees authorized to possess more than one effective kilogram of special nuclear material establish a management system to provide for the development, revision, implementation, and enforcement of nuclear material control and accounting procedures. Such a system must provide for a review of the nuclear material control system at least every 12 months. This guide describes the purpose and scope, personnel qualifications, depth of detail, and procedures that are acceptable to the NRC staff for the management review of nuclear material control systems required under paragraph 70.58(c) of 10 CFR Part 70. (U.S.)

Parental experiences of providing skin-to-skin care to their newborn infant—Part 1: A qualitative systematic review

Directory of Open Access Journals (Sweden)

Agneta Anderzén-Carlsson

2014-10-01

Full Text Available Aim: To describe parental experiences of providing skin-to-skin care (SSC to their newborn infants. Background: SSC care for newborn infants has been reported to have positive physiological and psychological benefits to the infants and their parents. No systematic review regarding parental experiences has been identified. Design: In this first part of a meta-study, the findings of a systematic literature review on parental experience of SSC care are presented. Data sources: Four databases were searched, without year or language limitations, up until December 2013. Manual searches were performed in reference lists and in a bibliography of the topic. Review methods: After a quality-appraisal process, data from the original articles were extracted and analysed using qualitative content analysis. Results: The systematic and manual searches led to the inclusion of 29 original qualitative papers from nine countries, reporting experiences from 401 mothers and 94 fathers. Two themes that characterized the provision of SSC emerged: a restoring experience and an energy-draining experience. Conclusion: This review has added scientific and systematic knowledge about parental experiences of providing SSC. Further research about fathers’ experiences is recommended.

Radiation protection at the RA reactor in 1984, Part II c Radioactivity control in the environment of the RA reactor, Meteorology measurements

International Nuclear Information System (INIS)

Grsic, Z.; Zaric, M.; Nikolic, R.; Stevanovic, M.

1984-01-01

During 1984, meteorology measurements were continued as a part of the environmental control of the Vinca Institute. This report covers the period from December 1983 - November 1984. Part of the meteorology measurements and data analysis is adapted to the needs of the Institute, i.e. RA reactor and some Laboratories. The objective of these activities is forming the data base for solving everyday and special problems related to control, protection and safety of Institute environment

Tutorial on Feedback Control of Flows, Part I: Stabilization of Fluid Flows in Channels and Pipes

Directory of Open Access Journals (Sweden)

Ole M. Aamo

2002-07-01

Full Text Available The field of flow control has picked up pace over the past decade or so, on the promise of real-time distributed control on turbulent scales being realizable in the near future. This promise is due to the micromachining technology that emerged in the 1980s and developed at an amazing speed through the 1990s. In lab experiments, so called micro-electro-mechanical systems (MEMS that incorporate the entire detection-decision-actuation process on a single chip, have been batch processed in large numbers and assembled into flexible skins for gluing onto body-fluid interfaces for drag reduction purposes. Control of fluid flows span a wide variety of specialities. In Part I of this tutorial, we focus on the problem of reducing drag in channel and pipe flows by stabilizing the parabolic equilibrium profile using boundary feedback control. The control strategics used for this problem include classical control, based on the Nyquist criteria, and various optimal control techniques (H2, H-Infinity, as well as applications of Lyapunov stability theory.

Providing Technical assistance on corruption control

OpenAIRE

Serge, Lortie

2012-01-01

The phenomenon referred to as corruption has now been generating a high degree of interest for over twenty years. It has in fact spawned not only an abundant literature but also a monitoring and advisory industry whose specific outlook heavily shapes the debate on integrity issues. This industry is widely supported by aid providers, be it the international financing institutions or national development agencies. At this juncture, it therefore seemed worthwhile to examine more critically an ar...

Quality control for digital mammography: Part II recommendations from the ACRIN DMIST trial

International Nuclear Information System (INIS)

Yaffe, Martin J.; Bloomquist, Aili K.; Mawdsley, Gordon E.

2006-01-01

The Digital Mammography Imaging Screening Trial (DMIST), conducted under the auspices of the American College of Radiology Imaging Network (ACRIN), is a clinical trial designed to compare the accuracy of digital versus screen-film mammography in a screening population [E. Pisano et al., ACRIN 6652--Digital vs. Screen-Film Mammography, ACRIN (2001)]. Part I of this work described the Quality Control program developed to ensure consistency and optimal operation of the digital equipment. For many of the tests, there were no failures during the 24 months imaging was performed in DMIST. When systems failed, they generally did so suddenly rather than through gradual deterioration of performance. In this part, the utility and effectiveness of those tests are considered. This suggests that after verification of proper operation, routine extensive testing would be of minimal value. A recommended set of tests is presented including additional and improved tests, which we believe meet the intent and spirit of the Mammography Quality Standards Act regulations to ensure that full-field digital mammography systems are functioning correctly, and consistently producing mammograms of excellent image quality

A Randomized Controlled Trial of the Effects of Online Pain Management Education on Primary Care Providers.

Science.gov (United States)

Trudeau, Kimberlee J; Hildebrand, Cristina; Garg, Priyanka; Chiauzzi, Emil; Zacharoff, Kevin L

2017-04-01

To improve pain management practices, we developed an online interactive continuing education (CE) program for primary care providers (PCPs). This program follows the flow of clinical decision-making through simulated cases at critical pain treatment points along the pain treatment continuum. A randomized controlled trial was conducted to test the efficacy of this program. Participants were randomized to either the experimental condition or the control condition (online, text-based CE program). A total of 238 primary care providers were recruited through hospitals, professional newsletters, and pain conferences. Participants in both conditions reported significantly improved scores on knowledge (KNOW-PAIN 50), attitudes (CAOS), and pain practice behaviors (PPBS) scales over the four-month study. The experimental condition showed significantly greater change over time on the tamper-resistant formulations (TRFs) of opioids and dosing CAOS subscale compared with the control condition. Post hoc comparisons suggested that participants in the experimental condition were less likely to endorse use of opioid TRFs over time compared with the control condition. Exploratory analyses for potential moderators indicated a significant three-way interaction with time, condition, and discipline (i.e., physician vs other) for the impediments and concerns attitudes subscale and the early refill behaviors subscale. Post hoc comparisons indicated that physicians in the experimental condition exhibited the greatest change in attitudes and the nonphysicians exhibited the greatest change in reported behaviors in response to requests for early refills. Findings suggest online CE programs may positively impact PCPs' knowledge, attitudes, and pain practice behaviors but provide minimal evidence for the value of including interactivity. © 2016 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

El reduccionismo científico y el control de las conciencias. Parte II

OpenAIRE

Leonardo Viniegra Velázquez

2014-01-01

En esta segunda parte se analizan los vínculos de subordinación del quehacer científico con lo que se designa como la lógica del poder y la dominación, a través de dar prioridad absoluta a los hechos sobre las ideas y favorecer el conocimiento capitalizable por la innovación tecnológica, la cual es decisiva en la rentabilidad y competitividad de las grandes empresas (los intereses de lucro que gobiernan el planeta), y base de los mecanismos de control político-social de las conciencias y de l...

Anaesthesiology as an integral part of Slovene partisan medical services provided during the second world war

Directory of Open Access Journals (Sweden)

Aleksander Manohin

2006-01-01

Full Text Available Background: The aim of this work was to describe the practice of anaesthesia in partisan military hospitals in Slovenia during the Second World War. The organisation of anaesthetic services delivered as an integral part of partisan medical care was unique in Europe and in the world. Healthcare givers exhibited a high level of professsional knowledge as well as exceptional resourcefulness, adaptability, and willigness to cope with physical and psychological demands of their work.Conclusions: During the Second World War, a number of healthcare facilities for treatment of wounded and severly ill soldiers, run by partisan forces, were established on the territory of Slovenia. The paper deals with the first and most important, Slovene central military partisan hospital in Kočevski Rog, and the best-known, Franja and Pavla Hospitals in Primorska region (Franja was proposed for entry in UNESCO’s list of World Heritage Sites. The authors used a large body of written documentation, as well as the testimony provided by the living witnesses of war events. The main characteristics of partisan fighting were constant movement of troops and absence of hinterland. Therefore, it was not possible to apply the basic principle of war medical services, i. e. to evacuate wounded soldiers to the hinterland through graded units of care. No handbooks on the organization of partisan medical services were available at the time, and there were no hard and fast rules for action. Frequently, healthcare had to be provided before any arrangements for the management of wounded soldiers had been made. The apparently unsolvable problems had to be solved on the spot. The paper gives information not only on anaesthesia but also on general conditions characteristic of that period. It is only in the light of this dramatically different situation that the role of anaesthetic services provided during the war can be understood correctly. The material is illustrated with more, mostly

Process and part filling control in micro injection molding

DEFF Research Database (Denmark)

Tosello, Guido; Hansen, Hans Nørgaard; Schoth, Andreas

2008-01-01

The influence of process parameters on μ-injection molding (μIM) and on μ-injection molded parts has been investigated using Design of Experiments. A mold with a sensor applied at injection location was used to monitor actual injection pressure and to determine the cavity filling time. Flow markers...... position was measured on the polymer μ-parts to evaluate filling behavior of the polymer melt flowing through μ-features. Experimental results obtained under different processing conditions were evaluated to correlate the process parameter levels influence on the selected responses. Results showed...... that the injection speed in one of the most influencing process parameters on the μIM process and on the μ-parts filling....

Impedance-Source Networks for Electric Power Conversion Part II

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Peng, Fang Zheng; Blaabjerg, Frede

2015-01-01

Impedance-source networks cover the entire spectrum of electric power conversion applications (dc-dc, dc-ac, ac-dc, ac-ac) controlled and modulated by different modulation strategies to generate the desired dc or ac voltage and current at the output. A comprehensive review of various impedance......-source-network-based power converters has been covered in a previous paper and main topologies were discussed from an application point of view. Now Part II provides a comprehensive review of the most popular control and modulation strategies for impedance-source network-based power converters/inverters. These methods...

Lunar Module ECS (Environmental Control System) - Design Considerations and Failure Modes. Part 1

Science.gov (United States)

Interbartolo, Michael

2009-01-01

Design considerations and failure modes for the Lunar Module (LM) Environmental Control System (ECS) are described. An overview of the the oxygen supply and cabin pressurization, atmosphere revitalization, water management and heat transport systems are provided. Design considerations including reliability, flight instrumentation, modularization and the change to the use of batteries instead of fuel cells are discussed. A summary is provided for the LM ECS general testing regime.

Effect of providing free glasses on children's educational outcomes in China: cluster randomized controlled trial.

Science.gov (United States)

Ma, Xiaochen; Zhou, Zhongqiang; Yi, Hongmei; Pang, Xiaopeng; Shi, Yaojiang; Chen, Qianyun; Meltzer, Mirjam E; le Cessie, Saskia; He, Mingguang; Rozelle, Scott; Liu, Yizhi; Congdon, Nathan

2014-09-23

To assess the effect of provision of free glasses on academic performance in rural Chinese children with myopia. Cluster randomized, investigator masked, controlled trial. 252 primary schools in two prefectures in western China, 2012-13. 3177 of 19,934 children in fourth and fifth grades (mean age 10.5 years) with visual acuity 6/12 with glasses. 3052 (96.0%) completed the study. Children were randomized by school (84 schools per arm) to one of three interventions at the beginning of the school year: prescription for glasses only (control group), vouchers for free glasses at a local facility, or free glasses provided in class. Spectacle wear at endline examination and end of year score on a specially designed mathematics test, adjusted for baseline score and expressed in standard deviations. Among 3177 eligible children, 1036 (32.6%) were randomized to control, 988 (31.1%) to vouchers, and 1153 (36.3%) to free glasses in class. All eligible children would benefit from glasses, but only 15% wore them at baseline. At closeout glasses wear was 41% (observed) and 68% (self reported) in the free glasses group, and 26% (observed) and 37% (self reported) in the controls. Effect on test score was 0.11 SD (95% confidence interval 0.01 to 0.21) when the free glasses group was compared with the control group. The adjusted effect of providing free glasses (0.10, 0.002 to 0.19) was greater than parental education (0.03, -0.04 to 0.09) or family wealth (0.01, -0.06 to 0.08). This difference between groups was significant, but was smaller than the prespecified 0.20 SD difference that the study was powered to detect. The provision of free glasses to Chinese children with myopia improves children's performance on mathematics testing to a statistically significant degree, despite imperfect compliance, although the observed difference between groups was smaller than the study was originally designed to detect. Myopia is common and rarely corrected in this setting.Trial Registration

Stable Controller Reconfiguration through Terminal Connections

DEFF Research Database (Denmark)

Trangbæk, K; Bendtsen, Jan Dimon

2009-01-01

system from scratch again, it is often desirable to retain the existing control system in place and phase the new parts in gradually. This paper presents a method for introducing new control components in a smooth manner, providing stability guarantees during the transition phase, and  retaining...

TG 220 MW hydraulic control system diagnostics

International Nuclear Information System (INIS)

Svabcik, A.

1996-01-01

The TG power output control system comprises a hydraulic and an electronic part. TG speed, power output or the main steam header pressure (HPK) depend on the steam flow at the turbine inlet. The steam admission into the turbine is controlled by four control valves and one by-pass valve in case of the HP part and by four capture flap valves in case of the LP part. The task of the SKODA K-220 MW turbine protection and control systems is to provide both the turbine speed and power output control to the setpoint value. Diagnostic measurements were aimed at getting an overview of both technical and functional states of all power output control elements. Principally, it can be stated that some deficiencies of a design nature originating from the manufacturer's factory were revealed and some other deficiencies related to hydraulic control elements functionality were identified more closely by the new method. 5 figs

TG 220 MW hydraulic control system diagnostics

Energy Technology Data Exchange (ETDEWEB)

Svabcik, A [Atomova Elektraren Bohunice, Jaslovske Bohunice (Slovakia)

1997-12-31

The TG power output control system comprises a hydraulic and an electronic part. TG speed, power output or the main steam header pressure (HPK) depend on the steam flow at the turbine inlet. The steam admission into the turbine is controlled by four control valves and one by-pass valve in case of the HP part and by four capture flap valves in case of the LP part. The task of the SKODA K-220 MW turbine protection and control systems is to provide both the turbine speed and power output control to the setpoint value. Diagnostic measurements were aimed at getting an overview of both technical and functional states of all power output control elements. Principally, it can be stated that some deficiencies of a design nature originating from the manufacturer`s factory were revealed and some other deficiencies related to hydraulic control elements functionality were identified more closely by the new method. 5 figs.

Method for providing slip energy control in permanent magnet electrical machines

Science.gov (United States)

Hsu, John S.

2006-11-14

An electric machine (40) has a stator (43), a permanent magnet rotor (38) with permanent magnets (39) and a magnetic coupling uncluttered rotor (46) for inducing a slip energy current in secondary coils (47). A dc flux can be produced in the uncluttered rotor when the secondary coils are fed with dc currents. The magnetic coupling uncluttered rotor (46) has magnetic brushes (A, B, C, D) which couple flux in through the rotor (46) to the secondary coils (47c, 47d) without inducing a current in the rotor (46) and without coupling a stator rotational energy component to the secondary coils (47c, 47d). The machine can be operated as a motor or a generator in multi-phase or single-phase embodiments and is applicable to the hybrid electric vehicle. A method of providing a slip energy controller is also disclosed.

15 CFR Supplement No. 2 to Part 742 - Anti-Terrorism Controls: North Korea, Syria and Sudan Contract Sanctity Dates and Related Policies

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Anti-Terrorism Controls: North Korea... CONTROLS Pt. 742, Supp. 2 Supplement No. 2 to Part 742—Anti-Terrorism Controls: North Korea, Syria and... terrorism under section 6(j) of the Export Administration Act (EAA). (b) Items controlled under EAA sections...

A recovery principle provides insight into auxin pattern control in the Arabidopsis root

Science.gov (United States)

Moore, Simon; Liu, Junli; Zhang, Xiaoxian; Lindsey, Keith

2017-01-01

Regulated auxin patterning provides a key mechanism for controlling root growth and development. We have developed a data-driven mechanistic model using realistic root geometry and formulated a principle to theoretically investigate quantitative auxin pattern recovery following auxin transport perturbation. This principle reveals that auxin patterning is potentially controlled by multiple combinations of interlinked levels and localisation of influx and efflux carriers. We demonstrate that (1) when efflux carriers maintain polarity but change levels, maintaining the same auxin pattern requires non-uniform and polar distribution of influx carriers; (2) the emergence of the same auxin pattern, from different levels of influx carriers with the same nonpolar localisation, requires simultaneous modulation of efflux carrier level and polarity; and (3) multiple patterns of influx and efflux carriers for maintaining an auxin pattern do not have spatially proportional correlation. This reveals that auxin pattern formation requires coordination between influx and efflux carriers. We further show that the model makes various predictions that can be experimentally validated. PMID:28220889

The effect of provider control of Blue Shield plans on health care markets.

Science.gov (United States)

Arnould, R J; DeBrock, L M

1985-07-01

Blue Shield plans often are granted regulatory advantages by the states in which they operate. Run efficiently, such not-for-profit firms should use these lower costs to eliminate their less advantaged rivals, the commercial insurers. However, these higher-cost commercial providers have been able to offer insurance coverage at prices competitive with the Blues, as evidenced by the fact that Blue plans have, on average, less than 50 percent market share. Similar prices with lower overall costs implies that economic rents are being earned, rents which a not-for-profit firm cannot distribute to owners. In this paper we argue that when there are competing goals among the groups controlling the Blue Shield plans, the different possible "uses" of the regulatory advantage become endogenously determined, necessitating the use of simultaneous equation estimation. Testing this model we find the major effect of doctor-control of Blue Shield plans is to raise doctors' fees while lowering the amount of rents captured by both consumers and administrators.

Wind farms providing secondary frequency regulation: Evaluating the performance of model-based receding horizon control

International Nuclear Information System (INIS)

Shapiro, Carl R.; Meneveau, Charles; Gayme, Dennice F.; Meyers, Johan

2016-01-01

We investigate the use of wind farms to provide secondary frequency regulation for a power grid. Our approach uses model-based receding horizon control of a wind farm that is tested using a large eddy simulation (LES) framework. In order to enable real-time implementation, the control actions are computed based on a time-varying one-dimensional wake model. This model describes wake advection and interactions, both of which play an important role in wind farm power production. This controller is implemented in an LES model of an 84-turbine wind farm represented by actuator disk turbine models. Differences between the velocities at each turbine predicted by the wake model and measured in LES are used for closed-loop feedback. The controller is tested on two types of regulation signals, “RegA” and “RegD”, obtained from PJM, an independent system operator in the eastern United States. Composite performance scores, which are used by PJM to qualify plants for regulation, are used to evaluate the performance of the controlled wind farm. Our results demonstrate that the controlled wind farm consistently performs well, passing the qualification threshold for all fastacting RegD signals. For the RegA signal, which changes over slower time scales, the controlled wind farm's average performance surpasses the threshold, but further work is needed to enable the controlled system to achieve qualifying performance all of the time. (paper)

Impedance-Source Networks for Electric Power Conversion Part I

DEFF Research Database (Denmark)

Siwakoti, Yam P.; Peng, Fang Zheng; Blaabjerg, Frede

2015-01-01

power chain, which may improve the reliability and performance of the power system. The first part of this paper provides a comprehensive review of the various impedance-source-networks-based power converters and discusses the main topologies from an application point of view. This review paper...... is the first of its kind with the aim of providing a “one-stop” information source and a selection guide on impedance-source networks for power conversion for researchers, designers, and application engineers. A comprehensive review of various modeling, control, and modulation techniques for the impedance...

Controlling jako součást podnikového informačního systému

OpenAIRE

NOVOTNÁ, Vendula

2017-01-01

This thesis deals with controlling and analyses role of controlling in company. The first part explains definition of controlling, how it has developed, and what roles and aims of controlling are. Furthermore, this part identifies role of controller and describes controlling tools. Practical part firtsly presents basic information about a company chosen for analysis and its use of controlling. Secondly, an overview of controlling is presented based on information provided by interviewed profe...

Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

Energy Technology Data Exchange (ETDEWEB)

Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

2011-09-01

Electrical energy consumption of the residential sector is a crucial area of research that has in the past primarily focused on increasing the efficiency of household devices such as water heaters, dishwashers, air conditioners, and clothes washer and dryer units. However, the focus of this research is shifting as objectives such as developing the smart grid and ensuring that the power system remains reliable come to the fore, along with the increasing need to reduce energy use and costs. Load research has started to focus on mechanisms to support the power system through demand reduction and/or reliability services. The power system relies on matching generation and load, and day-ahead and real-time energy markets capture most of this need. However, a separate set of grid services exist to address the discrepancies in load and generation arising from contingencies and operational mismatches, and to ensure that the transmission system is available for delivery of power from generation to load. Currently, these grid services are mostly provided by generation resources. The addition of renewable resources with their inherent variability can complicate the issue of power system reliability and lead to the increased need for grid services. Using load as a resource, through demand response programs, can fill the additional need for flexible resources and even reduce costly energy peaks. Loads have been shown to have response that is equal to or better than generation in some cases. Furthermore, price-incentivized demand response programs have been shown to reduce the peak energy requirements, thereby affecting the wholesale market efficiency and overall energy prices. The residential sector is not only the largest consumer of electrical energy in the United States, but also has the highest potential to provide demand reduction and power system support, as technological advancements in load control, sensor technologies, and communication are made. The prevailing loads

Feasibility and profitability of a radiology department providing trauma US as part of a trauma alert team.

Science.gov (United States)

Nunes, L W; Simmons, S; Kozar, R; Kinback, R; Hallowell, M J; Mulhern, C

2001-01-01

The purpose of this study was to assess the feasibility and profitability of a radiology department providing a six-point trauma ultrasound (US) examination for abdominal or pelvic free fluid as part of a trauma alert team. The study included 191 trauma alerts, which generated 156 US examinations. A radiologist and a departmental technologist carried beepers and responded to level I and II traumas. A departmental secretary or technologist recorded when the responding technologist exited and re-entered the department and if US was performed. If performed, the US examination evaluated the four abdominal and pelvic quadrants and the suprapubic and subxiphoid regions. For 64 patients, the responding technologist recorded the times of the trauma alert, emergency room arrival, US start and finish, and return to the radiology department. Median response, wait, scan duration, and return times were 2, 8, 5, and 7 minutes, respectively. Median costs for the technician, physician, archiving, transcription, and equipment were $8.17, $30.85, $0.97, $4.80, and $41.22, respectively. Reimbursement per examination averaged $110.60. Sensitivity analyses that varied the time spent (median vs mean), US non-use rate (10%-18%), and years of depreciation (5-7 years) yielded net results ranging from a $36.60 profit to a $6.12 loss per examination. A radiology department can profitably respond to trauma alerts and provide a six-point trauma US examination for free fluid.

Policy design in closed-loop supply chains for the integrated management of component recycling and spare parts supply in the electronics industry

Science.gov (United States)

Schroeter, Marcus; Spengler, Thomas

2004-02-01

The strategy to recover components from discarded electrical and electronic equipment to obtain spare parts is promising, especially during the final service phase. In that phase, the original product is no longer produced and the sources of new parts are often limited. Controlling those closed-loop supply chains is challenging. Decision makers have to choose when to acquire discarded equipment, when to recover used parts, and when to produce new parts. We developed a generic system dynamics model that provides a test for various proposed policies to control closed-loop supply chains with parts recovery and spare-parts supply.

Medicare Referring Provider DMEPOS PUF

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset, which is part of CMSs Medicare Provider Utilization and Payment Data, details information on Durable Medical Equipment, Prosthetics, Orthotics and...

Components for containment enclosures. Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices

International Nuclear Information System (INIS)

2001-01-01

ISO 11933 consists of the following parts, under the general title Components for containment enclosures: Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units; Part 2: Gloves, welded bags, gaiters for remote-handling tongs and for manipulators; Part 3: Transfer systems such as plain doors, airlock chambers, double door transfer systems, leaktight connections for waste drums; Part 4: Ventilation and gas-cleaning systems such as filters, traps, safety and regulation valves, control and protection devices; Part 5: Penetrations for electrical and fluid circuits. This part of ISO 11933 specifies the design criteria and the characteristics of various components used for ventilation and gas-cleaning in containment enclosures. These components are either directly fixed to the containment enclosure wall, or used in the environment of a shielded or unshielded containment enclosure or line of such enclosures. They can be used alone or in conjunction with other mechanical components, including those specified in ISO 11933-1 and ISO 11933-3. This part of ISO 11933 is applicable to: filtering devices, including high-efficiency particulate air (HEPA) filters and iodine traps; safety valves and pressure regulators; systems ensuring the mechanical protection of containment enclosures; control and pressure-measurement devices

Use of configuration management to reduce development costs in metal parts

International Nuclear Information System (INIS)

Kalsoom, T.; Ahmad, S.

2005-01-01

In development and manufacturing phases of metal parts, design efforts are converted in set of engineering data pack under the given guidelines of Configuration Management (CM). These engineering documents define Configuration Management of metal parts production in a local industry. The development phase is normally less structured and open to Engineering Change Proposals. In our local engineering organizations most of the work done is normally not well documented for future revisions and modernization. This leads to delays in development and increase in production costs of metal parts. This becomes more pronounced if any member of the design team disassociates and leaves the organization. The Configuration Management helps to reduce development costs by providing infrastructure for product identification, documentation, change control, interface control and technical reviews and product audits. Automated or Computer-Assisted CM activities can also be used to shorten response time and increase accuracy and reliability of the produced metal components. (author)

Shock buffer for nuclear control assembly

International Nuclear Information System (INIS)

Bevilacqua, F.

1977-01-01

A shock buffer is provided for the gradual deceleration of a rapidly descending control element assembly in a nuclear reactor. The interactive buffer components are associated respectively with the movable control element assembly and part of the upper guide structure independent of and spaced from the fuel assemblies of the reactor

Reactor instrumentation and control

International Nuclear Information System (INIS)

Wach, D.; Beraha, D.

1980-01-01

The methods for measuring radiation are shortly reviewed. The instrumentation for neutron flux measurement is classified into out-of-core and in-core instrumentation. The out-of-core instrumentation monitors the operational range from the subcritical reactor to full power. This large range is covered by several measurement channels which derive their signals from counter tubes and ionization chambers. The in-core instrumentation provides more detailed information on the power distribution in the core. The self-powered neutron detectors and the aeroball system in PWR reactors are discussed. Temperature and pressure measurement devices are briefly discussed. The different methods for leak detection are described. In concluding the plant instrumentation part some new monitoring systems and analysis methods are presented: early failure detection methods by noise analysis, acoustic monitoring and vibration monitoring. The presentation of the control starts from an qualitative assessment of the reactor dynamics. The chosen control strategy leads to the definition of the part-load diagram, which provides the set-points for the different control systems. The tasks and the functions of these control systems are described. In additiion to the control, a number of limiting systems is employed to keep the reactor in a safe operating region. Finally, an outlook is given on future developments in control, concerning mainly the increased application of process computers. (orig./RW)

Improving Accuracy of Processing Through Active Control

Directory of Open Access Journals (Sweden)

N. N. Barbashov

2016-01-01

Full Text Available An important task of modern mathematical statistics with its methods based on the theory of probability is a scientific estimate of measurement results. There are certain costs under control, and under ineffective control when a customer has got defective products these costs are significantly higher because of parts recall.When machining the parts, under the influence of errors a range scatter of part dimensions is offset towards the tolerance limit. To improve a processing accuracy and avoid defective products involves reducing components of error in machining, i.e. to improve the accuracy of machine and tool, tool life, rigidity of the system, accuracy of the adjustment. In a given time it is also necessary to adapt machine.To improve an accuracy and a machining rate there, currently  become extensively popular various the in-process gaging devices and controlled machining that uses adaptive control systems for the process monitoring. Improving the accuracy in this case is compensation of a majority of technological errors. The in-cycle measuring sensors (sensors of active control allow processing accuracy improvement by one or two quality and provide a capability for simultaneous operation of several machines.Efficient use of in-cycle measuring sensors requires development of methods to control the accuracy through providing the appropriate adjustments. Methods based on the moving average, appear to be the most promising for accuracy control since they include data on the change in some last measured values of the parameter under control.

Educating the Educator: Use of Advanced Bleeding Control Mechanisms in Athletic Training: A Shift in the Thought Process of Prehospital Care. Part 2: Hemostatic Agents

Science.gov (United States)

Payne, Ellen K.; Berry, David C.; Seitz, S. Robert

2014-01-01

In Part 1 of this series [see: EJ1044392], the concepts of hemorrhaging, shock, and controlling bleeding as they relate to athletic training and prehospital emergency care along with the use of tourniquets were presented for athletic training educators (ATEs) to teach the skill in the classroom. This article, Part 2 of advanced bleeding control,…

Architecture of conference control functions

Science.gov (United States)

Kausar, Nadia; Crowcroft, Jon

1999-11-01

Conference control is an integral part in many-to-many communications that is used to manage and co-ordinate multiple users in conferences. There are different types of conferences which require different types of control. Some of the features of conference control may be user invoked while others are for internal management of a conference. In recent years, ITU (International Telecommunication Union) and IETF (Internet Engineering Task Force) have standardized two main models of conferencing, each system providing a set of conference control functionalities that are not easily provided in the other one. This paper analyzes the main activities appropriate for different types of conferences and presents an architecture for conference control called GCCP (Generic Conference Control Protocol). GCCP interworks different types of conferencing and provides a set of conference control functions that can be invoked by users directly. As an example of interworking, interoperation of IETF's SIP and ITU's H.323 call control functions have been examined here. This paper shows that a careful analysis of a conferencing architecture can provide a set of control functions essential for any group communication model that can be extensible if needed.

Adaptive Extremum Control and Wind Turbine Control

DEFF Research Database (Denmark)

Ma, Xin

1997-01-01

This thesis is divided into two parts, i.e., adaptive extremum control and modelling and control of a wind turbine. The rst part of the thesis deals with the design of adaptive extremum controllers for some processes which have the behaviour that process should have as high e ciency as possible...... in parameters, and thus directly lends itself to parameter estimation and adaptive control. The extremum control law is derived based on static optimization of a performance function. For a process with nonlinearity at output the intermediate signal between the linear part and nonlinear part plays an important....... Firstly, it is assumed that the nonlinear processes can be divided into a dynamic linear part and static nonlinear part. Consequently the processes with input nonlinearity and output nonlinearity are treated separately. With the nonlinearity at the input it is easy to set up a model which is linear...

"Great Job Cleaning Your Plate Today!" Determinants of Child-Care Providers' Use of Controlling Feeding Practices: An Exploratory Examination.

Science.gov (United States)

Dev, Dipti A; McBride, Brent A; Speirs, Katherine E; Blitch, Kimberly A; Williams, Natalie A

2016-11-01

National early childhood obesity prevention policies recommend that child-care providers avoid controlling feeding practices (CFP) (eg, pressure-to-eat, food as reward, and praising children for cleaning their plates) with children to prevent unhealthy child eating behaviors and childhood obesity. However, evidence suggests that providers frequently use CFP during mealtimes. Using the Academy of Nutrition and Dietetics (2011) benchmarks for nutrition in child care as a framework, researchers assessed child-care providers' perspectives regarding their use of mealtime CFP with young children (aged 2 to 5 years). Using a qualitative design, individual, face-to-face, semi-structured interviews were conducted with providers until saturation was reached. Providers were selected using maximum variation purposive sampling from varying child-care contexts (Head Start, Child and Adult Care Food Program [CACFP]-funded centers, non-CACFP programs). All providers were employed full-time in Head Start or state-licensed center-based child-care programs, cared for children (aged 2 to 5 years), and were directly responsible for serving meals and snacks. Child-care providers' perspectives regarding CFP. Thematic analysis using NVivo (version 9, 2010, QSR International Pty Ltd) to derive themes. Providers' perspectives showed barriers, motivators, and facilitators regarding their use of mealtime CFP. Providers reported barriers to avoiding CFP such as CFP were effective for encouraging desired behaviors, misconceptions that providers were encouraging but not controlling children's eating, and fear of parents' negative reaction if their child did not eat. Providers who did not practice CFP were motivated to avoid CFP because they were unnecessary for encouraging children to eat, and they resulted in negative child outcomes and obesity. Facilitators as an alternative to CFP included practicing healthful feeding practices such as role modeling, peer modeling, and sensory exploration of

Controller tuning with evolutionary multiobjective optimization a holistic multiobjective optimization design procedure

CERN Document Server

Reynoso Meza, Gilberto; Sanchis Saez, Javier; Herrero Durá, Juan Manuel

2017-01-01

This book is devoted to Multiobjective Optimization Design (MOOD) procedures for controller tuning applications, by means of Evolutionary Multiobjective Optimization (EMO). It presents developments in tools, procedures and guidelines to facilitate this process, covering the three fundamental steps in the procedure: problem definition, optimization and decision-making. The book is divided into four parts. The first part, Fundamentals, focuses on the necessary theoretical background and provides specific tools for practitioners. The second part, Basics, examines a range of basic examples regarding the MOOD procedure for controller tuning, while the third part, Benchmarking, demonstrates how the MOOD procedure can be employed in several control engineering problems. The fourth part, Applications, is dedicated to implementing the MOOD procedure for controller tuning in real processes.

Managing emergencies and abnormal situations in air traffic control (part II): teamwork strategies.

Science.gov (United States)

Malakis, Stathis; Kontogiannis, Tom; Kirwan, Barry

2010-07-01

Team performance has been studied in many safety-critical organizations including aviation, nuclear power plant, offshore oil platforms and health organizations. This study looks into teamwork strategies that air traffic controllers employ to manage emergencies and abnormal situations. Two field studies were carried out in the form of observations of simulator training in emergency and unusual scenarios of novices and experienced controllers. Teamwork strategies covered aspects of team orientation and coordination, information exchange, change management and error handling. Several performance metrics were used to rate the efficiency of teamwork and test the construct validity of a prototype model of teamwork. This is a companion study to an earlier investigation of taskwork strategies in the same field (part I) and contributes to the development of a generic model for Taskwork and Teamwork strategies in Emergencies in Air traffic Management (T(2)EAM). Suggestions are made on how to use T(2)EAM to develop training programs, assess team performance and improve mishap investigations. Copyright 2010 Elsevier Ltd. All rights reserved.

The LHCb Run Control

CERN Document Server

Alessio, F; Callot, O; Duval, P-Y; Franek, B; Frank, M; Galli, D; Gaspar, C; v Herwijnen, E; Jacobsson, R; Jost, B; Neufeld, N; Sambade, A; Schwemmer, R; Somogyi, P

2010-01-01

LHCb has designed and implemented an integrated Experiment Control System. The Control System uses the same concepts and the same tools to control and monitor all parts of the experiment: the Data Acquisition System, the Timing and the Trigger Systems, the High Level Trigger Farm, the Detector Control System, the Experiment's Infrastructure and the interaction with the CERN Technical Services and the Accelerator. LHCb's Run Control, the main interface used by the experiment's operator, provides access in a hierarchical, coherent and homogeneous manner to all areas of the experiment and to all its sub-detectors. It allows for automated (or manual) configuration and control, including error recovery, of the full experiment in its different running modes. Different instances of the same Run Control interface are used by the various sub-detectors for their stand-alone activities: test runs, calibration runs, etc. The architecture and the tools used to build the control system, the guidelines and components provid...

The APS control system network

International Nuclear Information System (INIS)

Sidorowicz, K.V.; McDowell, W.P.

1995-01-01

The APS accelerator control system is a distributed system consisting of operator interfaces, a network, and computer-controlled interfaces to hardware. This implementation of a control system has come to be called the open-quotes Standard Model.close quotes The operator interface is a UNDC-based workstation with an X-windows graphical user interface. The workstation may be located at any point on the facility network and maintain full functionality. The function of the network is to provide a generalized communication path between the host computers, operator workstations, input/output crates, and other hardware that comprise the control system. The crate or input/output controller (IOC) provides direct control and input/output interfaces for each accelerator subsystem. The network is an integral part of all modem control systems and network performance will determine many characteristics of a control system. This paper will describe the overall APS network and examine the APS control system network in detail. Metrics are provided on the performance of the system under various conditions

Virtualized Network Control. Final Report

Energy Technology Data Exchange (ETDEWEB)

Ghani, Nasir [Univ. of New Mexico, Albuquerque, NM (United States)

2013-02-01

This document is the final report for the Virtualized Network Control (VNC) project, which was funded by the United States Department of Energy (DOE) Office of Science. This project was also informally referred to as Advanced Resource Computation for Hybrid Service and TOpology NEtworks (ARCHSTONE). This report provides a summary of the project's activities, tasks, deliverable, and accomplishments. It also provides a summary of the documents, software, and presentations generated as part of this projects activities. Namely, the Appendix contains an archive of the deliverables, documents, and presentations generated a part of this project.

Designing a system for patients controlling providers' access to their electronic health records: organizational and technical challenges.

Science.gov (United States)

Leventhal, Jeremy C; Cummins, Jonathan A; Schwartz, Peter H; Martin, Douglas K; Tierney, William M

2015-01-01

Electronic health records (EHRs) are proliferating, and financial incentives encourage their use. Applying Fair Information Practice principles to EHRs necessitates balancing patients' rights to control their personal information with providers' data needs to deliver safe, high-quality care. We describe the technical and organizational challenges faced in capturing patients' preferences for patient-controlled EHR access and applying those preferences to an existing EHR. We established an online system for capturing patients' preferences for who could view their EHRs (listing all participating clinic providers individually and categorically-physicians, nurses, other staff) and what data to redact (none, all, or by specific categories of sensitive data or patient age). We then modified existing data-viewing software serving a state-wide health information exchange and a large urban health system and its primary care clinics to allow patients' preferences to guide data displays to providers. Patients could allow or restrict data displays to all clinicians and staff in a demonstration primary care clinic, categories of providers (physicians, nurses, others), or individual providers. They could also restrict access to all EHR data or any or all of five categories of sensitive data (mental and reproductive health, sexually transmitted diseases, HIV/AIDS, and substance abuse) and for specific patient ages. The EHR viewer displayed data via reports, data flowsheets, and coded and free text data displayed by Google-like searches. Unless patients recorded restrictions, by default all requested data were displayed to all providers. Data patients wanted restricted were not displayed, with no indication they were redacted. Technical barriers prevented redacting restricted information in free textnotes. The program allowed providers to hit a "Break the Glass" button to override patients' restrictions, recording the date, time, and next screen viewed. Establishing patient-control

Contamination control requirements implementation for the James Webb Space Telescope (JWST), part 2: spacecraft, sunshield, observatory, and launch

Science.gov (United States)

Wooldridge, Eve M.; Schweiss, Andrea; Henderson-Nelson, Kelly; Woronowicz, Michael; Patel, Jignasha; Macias, Matthew; McGregor, R. Daniel; Farmer, Greg; Schmeitzky, Olivier; Jensen, Peter; Rumler, Peter; Romero, Beatriz; Breton, Jacques

2014-09-01

This paper will continue from Part 1 of JWST contamination control implementation. In addition to optics, instruments, and thermal vacuum testing, JWST also requires contamination control for a spacecraft that must be vented carefully in order to maintain solar array and thermal radiator thermal properties; a tennis court-sized sunshield made with 1-2 mil Kapton™ layers that must be manufactured and maintained clean; an observatory that must be integrated, stowed and transported to South America; and a rocket that typically launches commercial payloads without contamination sensitivity. An overview of plans developed to implement contamination control for the JWST spacecraft, sunshield, observatory and launch vehicle will be presented.

Optimization of Process Parameters of Edge Robotic Deburring with Force Control

Science.gov (United States)

Burghardt, A.; Szybicki, D.; Kurc, K.; Muszyńska, M.

2016-12-01

The issues addressed in the paper present a part of the scientific research conducted within the framework of the automation of the aircraft engine part manufacturing processes. The results of the research presented in the article provided information in which tolerances while using a robotic control station with the option of force control we can make edge deburring.

Control method for prosthetic devices

Science.gov (United States)

Bozeman, Richard J., Jr. (Inventor)

1995-01-01

A control system and method for prosthetic devices is provided. The control system comprises a transducer for receiving movement from a body part for generating a sensing signal associated with that movement. The sensing signal is processed by a linearizer for linearizing the sensing signal to be a linear function of the magnitude of the distance moved by the body part. The linearized sensing signal is normalized to be a function of the entire range of body part movement from the no-shrug position of the moveable body part. The normalized signal is divided into a plurality of discrete command signals. The discrete command signals are used by typical converter devices which are in operational association with the prosthetic device. The converter device uses the discrete command signals for driving the moveable portions of the prosthetic device and its sub-prosthesis. The method for controlling a prosthetic device associated with the present invention comprises the steps of receiving the movement from the body part, generating a sensing signal in association with the movement of the body part, linearizing the sensing signal to be a linear function of the magnitude of the distance moved by the body part, normalizing the linear signal to be a function of the entire range of the body part movement, dividing the normalized signal into a plurality of discrete command signals, and implementing the plurality of discrete command signals for driving the respective moveable prosthesis device and its sub-prosthesis.

Radiation protection at the RA Reactor in 1985, Part -2, Annex 1, Radioactivity control of working environment, dosimetry

International Nuclear Information System (INIS)

Ninkovic, M.; Bjelanovic, J.; Minincic, Z.; Komatina, R.; Raicevic, J.

1985-01-01

This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. It was found that the maximum individual dose from external irradiation amounted to 8.2 mSV during past 10 months. Individual exposures for 7/10 of the personnel were less than 1/10 of the annual permissible exposure. Data are compared to radiation doses for last year and previous five years. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. The last part analyzes accidents occurred at the reactor during 1985. It was found that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel [sr

Radiation protection - Performance criteria for radiobioassay. Part 1: General principles

International Nuclear Information System (INIS)

2001-01-01

International Standard ISO 12790-1 was prepared by Technical Committee ISO/TC 85, Nuclear energy, Subcommittee SC 2, Radiation protection. ISO 12790 consists of the following parts, under the general title Radiation protection - Performance criteria for radiobioassay: Part 1: General principles; and Part 2: Rationale and specific applications This part of ISO 12790 provides criteria for quality assurance and control, evaluation of performance and the accreditation of radiobioassay service laboratories. Criteria and guidance for direct radiobioassay ( in vivo) and indirect radiobioassay ( in vitro) are given in separate clauses of this part of ISO 12790. This part of ISO 12790 addresses: a) the accuracy of direct ( in vivo) measurements of activity and quantities of selected important radionuclides in test phantoms and indirect ( in vitro) measurements of activity and quantities of selected important radionuclides in test samples; b) methods for determining the minimum detectable amount; c) minimum testing levels and testing ranges; d) requirements for reporting radiobioassay results by service laboratories; e) quality assurance in service laboratories; f) quality control in service laboratories; g) protocol for reporting test evaluations by service laboratories to the testing laboratory; h) default procedures when the service laboratory customer does not specify the performance criteria. The scope of this part of ISO 12790 does not include: a) detailed radiochemical methods for separating radionuclides from biological samples; b) detailed procedures for in vivo and in vitro radioactivity measurements; c) metabolic data and mathematical models for converting radiobioassay results into absorbed dose and dose equivalent; d) procedures for the preparation and distribution of test samples and phantoms by the testing laboratories. Analytical methods for radiobioassay are not currently standardized, but are available in the literature. Guidance for converting

Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

International Nuclear Information System (INIS)

2007-01-01

This part of ISO 11135 describes requirements that, if met, will provide an ethylene oxide sterilization process intended to sterilize medical devices, which has appropriate microbicidal activity. Furthermore, compliance with the requirements ensures that this activity is both reliable and reproducible so that it can be predicted, with reasonable confidence, that there is a low level of probability of there being a viable microorganism present on product after sterilization. Specification of this probability is a matter for regulatory authorities and may vary from country to country. The paper provides information on scope, normative references, terms and definitions, quality management systems, sterilizing agent characterization, process and equipment characterization, product definition, process definition, validation, routine monitoring and control, product release from sterilization and maintaining process effectiveness followed by Annex A (Determination of lethal rate of the sterilization process - Biological indicator/bioburden approach), Annex B (Conservative determination of lethal rate of the sterilization process - Overkill approach, annex C (General guidance) and a bibliography.

Impact of late-to-refill reminder calls on medication adherence in the Medicare Part D population: evaluation of a randomized controlled study

Directory of Open Access Journals (Sweden)

Taitel MS

2017-02-01

Full Text Available Michael S Taitel, Ying Mu, Angshuman Gooptu, Youbei Lou Health Analytics, Research & Reporting, Walgreen Co., Deerfield, IL, USA Objectives: This study evaluates a nationwide pharmacy chain’s late-to-refill (LTR reminder program that entails local pharmacists placing reminder calls to Medicare Part D patients. Methods: We conducted a randomized controlled study among 735,218 patients who exhibited nonadherent behavior by not refilling a maintenance medication 3 days from an expected refill date. Patients were randomly assigned to an intervention group who received LTR reminder calls or to a control group. We used Walgreens pharmaceutical claims data from 2015 to estimate the impact of LTR calls on short-term and annual adherence. Results: The initial refill rate within the first 14 days of the expected refill date significantly increased in the intervention group by 22.8% (6.09 percentage points compared to the control group (P<0.001. The proportion of days covered (PDC in the intervention group increased significantly by 1.5% (0.856 percentage points relative to the control group (P<0.001 over 365 days. Patients in the intervention group were significantly more adherent (PDC ≥80% by 3% (0.97 percentage points compared to the control group (P<0.001. Over a 270-day follow-up period, persistence significantly increased by 2.15 days in the intervention group (P<0.001. Conclusion: Results from this study suggest that LTR reminder calls increased adherence for Medicare Part D patients who are late in refilling their medications and therefore have the potential to reduce their risk for hospitalization and health care costs. Additionally, the intervention increased the number of patients with PDC ≥80% by ~3%, positively impacting Medicare Part D plan quality rating. Keywords: reminder system, tailored intervention, Medicare Part D, adherence, persistence

Providing reviews of evidence to COPD patients: controlled prospective 12-month trial.

Science.gov (United States)

Harris, M; Smith, B J; Veale, A J; Esterman, A; Frith, P A; Selim, P

2009-01-01

The aim of this study was to evaluate a novel patient-held manual designed to reduce the evidence-practice gap in chronic obstructive pulmonary disease (COPD). The intervention manual contained summaries of research evidence. It was developed using current best practice for patient information materials and designed to cause discussion of evidence between patient and doctor. A controlled before-and-after study was employed in two similar but geographically separate regions of metropolitan Adelaide, South Australia. Participants had moderate to severe COPD, with 249 included at baseline and 201 completing the study. Evidence-based COPD management was measured using an indicator with three components: rates of influenza vaccination, bone density testing, and pulmonary rehabilitation. A survey of behavioral steps leading to practice change was conducted with the trial. Analysis, by median split of socioeconomic disadvantage, showed significant difference between study arms for only one component of the indicator of evidence-based practice, enrollment in pulmonary rehabilitation and only for the most socioeconomically disadvantaged stratum. For both socioeconomic strata, more intervention participants than control participants reported remembering being given the information material, reading part or all, and finding it very or quite helpful. Other significant differences were restricted to the stratum of greatest socioeconomic disadvantage: reading all of the material, learning from it, referring back, and talking to a doctor about a topic from the material. Above 90% of all participants who received the manual reported reading from it, 42% reported discussing topics with a doctor, but only 10% reported treatment change attributable to the manual. We have found that people with COPD will read an evidence manual developed using current best practice. However, the study demonstrated improvement for only one of the three components of an indicator of evidence

RCT: 2.05 Contamination Control, Course #8770

Energy Technology Data Exchange (ETDEWEB)

Hillmer, Kurt T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-05-23

This report focuses on the detection and control of radioactive contamination, which are an integral part of an aggressive ALARA program and provide an indication of the effectiveness of engineering controls and proper work practices in preventing the release of radioactive material. Radioactive contamination, if undetected or not properly controlled, can be spread and contaminate areas, equipment, personnel, and the environment.

Control System for Prosthetic Devices

Science.gov (United States)

Bozeman, Richard J. (Inventor)

1996-01-01

A control system and method for prosthetic devices is provided. The control system comprises a transducer for receiving movement from a body part for generating a sensing signal associated with that of movement. The sensing signal is processed by a linearizer for linearizing the sensing signal to be a linear function of the magnitude of the distance moved by the body part. The linearized sensing signal is normalized to be a function of the entire range of body part movement from the no-shrug position of the moveable body part through the full-shrg position of the moveable body part. The normalized signal is divided into a plurality of discrete command signals. The discrete command signals are used by typical converter devices which are in operational association with the prosthetic device. The converter device uses the discrete command signals for driving the moveable portions of the prosthetic device and its sub-prosthesis. The method for controlling a prosthetic device associated with the present invention comprises the steps of receiving the movement from the body part, generating a sensing signal in association with the movement of the body part, linearizing the sensing signal to be a linear function of the magnitude of the distance moved by the body part, normalizing the linear signal to be a function of the entire range of the body part movement, dividing the normalized signal into a plurality of discrete command signals, and implementing the plurality of discrete command signals for driving the respective moveable prosthesis device and its sub-prosthesis.

Device for controlling neutron flux

International Nuclear Information System (INIS)

Hirukawa, Koji.

1979-01-01

Purpose: To separately provide a reflux-type control tube and a scramming control rod, and arrange respective control tube groups concentrically from the core to the outside, and add a monitoring material thereto, thereby simplifying control system, flattening and controlling the core power. Constitution: At the central part of four fuel assemblies there are arranged reflux type control tubes filled with a solution of a neutron control substance, and four of the fundamental units are assembled and scramming control rods and provided at the center of these fundamental units in a freely insertable and removable manner, thereby forming a unit. The units of reflux type control tubes filled with the solutions of the neutron control substances having different concentrations are arranged concentrically from the core to the outside. Further, a monitoring substance such as phosphoric acid or the like, displaying similar behaviors as the solution is added in the solution, and the concentration of the solution is continuously measured. (Sekiya, K.)

Advanced control of piezoelectric micro-nano-positioning systems

CERN Document Server

Xu, Qingsong

2016-01-01

This book explores emerging methods and algorithms that enable precise control of micro-/nano-positioning systems. The text describes three control strategies: hysteresis-model-based feedforward control and hysteresis-model-free feedback control based on and free from state observation. Each paradigm receives dedicated attention within a particular part of the text. Readers are shown how to design, validate and apply a variety of new control approaches in micromanipulation: hysteresis modelling, discrete-time sliding-mode control and model-reference adaptive control. Experimental results are provided throughout and build up to a detailed treatment of practical applications in the fourth part of the book. The applications focus on control of piezoelectric grippers. Advanced Control of Piezoelectric Micro-/Nano-Positioning Systems will assist academic researchers and practising control and mechatronics engineers interested in suppressing sources of nonlinearity such as hysteresis and drift when combining positi...

Optimization of Process Parameters of Edge Robotic Deburring with Force Control

Directory of Open Access Journals (Sweden)

Burghardt A.

2016-12-01

Full Text Available The issues addressed in the paper present a part of the scientific research conducted within the framework of the automation of the aircraft engine part manufacturing processes. The results of the research presented in the article provided information in which tolerances while using a robotic control station with the option of force control we can make edge deburring.

Better utilisation of district heating systems. Subproject Hanover-Hamburg: 'Analysis of the control characteristics of district heating grids'. Part 1: Optimisation of automatic pump control for fast load variations. Part 2: Automation of district heating pumps at the man-machine communication interface. Part 3: Installation and adaptation of the BoFiT program system (Hanover only). Final report; Bessere Ausnutzung von Fernwaermeanlagen. Teilprojekt Hannover-Hamburg: 'Analyse des Regelverhaltens von Fernwaermenetzen'. T. 1: Optimieren einer automatischen Pumpensteuerung auf schnelle Lastwechsel. T. 2: Darstellen der Automatisierungseinrichtungen von Fernwaermepumpen an der Mensch-Maschine-Kommunikationsschnittstelle (MMK). T. 3: Installation und Anpassung des Programmsystems BoFiT (nur Hannover). Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Tuchs, M.; Beecken, J.; Hilmer, W.; Oel, M.; Schaper, H.; Micus, W.; Tegeler, C.; Ridder, M.; Schoettker, P.; Rogalla, B.U.; Feuerriegel, S.

2000-07-01

The general target of the interconnection research intention is discovering margins for optimizing the heat consumption by fast and ensured variation between producers with CHP generation plants and plants for primary heat and reverse. The project is subdivided in three parts: In part 1 the usefulness of automated operation of the communal distributed heating net-work was determined by: Comparison of real measurements with simulated processes calculations of the differential control processes, development and analysis of a control process concept and improvement of the existing controler action in the Hamburg and the Hannover model, investigations of the effects of closed loop control on safety and portrayal of the processes during optimised and automated operation. The advantage of this system can be demonstrated to be both economical and ecological. Safety analysis showed that a higher degree of automation does not compromise safe operation. In Hamburg these findings led to the development of a training simulator for the operating personnel. The optimisation techniques presented in part 1 can therefore be implemented in a model, which provides a very good analogy to the real network. In part 2 innovative forms of presentation of hydraulic relations of the controled District Heating network where developed. They where realised in a computer program. This program was installed in the District Heating control room. The target of part 3 is the practical application of BoFit for the generation of optimized propositions for operation mode of the District Heating net-work. The consideration of the actual condition of the District Heating network was realized by online-connection to the process data processing. The situation of costs of heat supply is found out by simulations for the present moment and for a prognosted period. (orig.)

Microbiological Tests Performed During the Design of the International Space Station Environmental Control and Life Support Systems. Part 1, Bulk Phase. Part 1; Bulk Phase

Science.gov (United States)

Roman, Monsi C.; Mittelman, Marc W.

2010-01-01

The design and manufacturing of the main Environmental Control and Life Support Systems (ECLSS) for the United States segments of the International Space Station (ISS) was an involved process that started in the mid 1980s, with the assessment and testing of competing technologies that could be used to clean the air and recycle water. It culminated in 2009 with the delivery and successful activation of the Water Recovery System (WRS) water processor (WP). The ECLSS required the work of a team of engineers and scientist working together to develop systems that could clean and/or recycle human metabolic loads to maintain a clean atmosphere and provide the crew clean water. One of the main goals of the ECLSS is to minimize the time spent by the crew worrying about vital resources not available in the vacuum of space, which allows them to spend most of their time learning to live in a microgravity environment many miles from the comforts of Earth and working on science experiments. Microorganisms are a significant part of the human body as well as part of the environment that we live in. Therefore, the ISS ECLSS design had to take into account the effect microorganisms have on the quality of stored water and wastewater, as well as that of the air systems. Hardware performance issues impacted by the accumulation of biofilm and/or microbiologically influenced corrosion were also studied during the ECLSS development stages. Many of the tests that were performed had to take into account the unique aspects of a microgravity environment as well as the challenge of understanding how to design systems that could not be sterilized or maintained in a sterile state. This paper will summarize the work of several studies that were performed to assess the impacts and/or to minimize the effects of microorganisms in open, semi-closed and closed loop life support system. The biofilm and biodeterioration studies that were performed during the design and test periods will be presented in

Spare parts inventory control under system availability constraints

NARCIS (Netherlands)

Houtum, van G.J.J.A.N.; Kranenburg, A.A.

2015-01-01

This book focuses on the tactical planning level for spare parts management. It describes a series of multi-item inventory models and presents exact and heuristic optimization methods, including greedy heuristics that work well for real, life-sized problems. The intended audience consists of

Depression treatment for impoverished mothers by point-of-care providers: A randomized controlled trial.

Science.gov (United States)

Segre, Lisa S; Brock, Rebecca L; O'Hara, Michael W

2015-04-01

Depression in low-income, ethnic-minority women of childbearing age is prevalent and compromises infant and child development. Yet numerous barriers prevent treatment delivery. Listening Visits (LV), an empirically supported intervention developed for delivery by British home-visiting nurses, could address this unmet mental health need. This randomized controlled trial (RCT) evaluated the effectiveness of LV delivered at a woman's usual point-of-care, including home visits or an ob-gyn office. Listening Visits were delivered to depressed pregnant women or mothers of young children by their point-of-care provider (e.g., home visitor or physician's assistant), all of whom had low levels of prior counseling experience. Three quarters of the study's participants were low-income. Of those who reported ethnicity, all identified themselves as minorities. Participants from 4 study sites (N = 66) were randomized in a 2:1 ratio, to LV or a wait-list control group (WLC). Assessments, conducted at baseline and 8 weeks, evaluated depression, quality of life, and treatment satisfaction. Depressive severity, depressive symptoms, and quality of life significantly improved among LV recipients as compared with women receiving standard social/health services. Women valued LV as evidenced by their high attendance rates and treatment satisfaction ratings. In a stepped model of depression care, LV can provide an accessible, acceptable, and effective first-line treatment option for at-risk women who otherwise are unlikely to receive treatment. (PsycINFO Database Record (c) 2015 APA, all rights reserved).

Mathematical control theory

International Nuclear Information System (INIS)

Agrachev, A.A.

2002-01-01

This volume is based on the lecture notes of the minicourses given in the frame of the school on Mathematical Control Theory held at the Abdus Salam ICTP from 3 to 28 September 2001. Mathematical Control Theory is a rapidly growing field which provides strict theoretical and computational tools for dealing with problems arising in electrical and aerospace engineering, automatics, robotics, applied chemistry, and biology etc. Control methods are also involved in questions pertaining to the development of countries in the South, such as wastewater treatment, agronomy, epidemiology, population dynamics, control of industrial and natural bio-reactors. Since most of these natural processes are highly nonlinear, the tools of nonlinear control are essential for the modelling and control of such processes. At present regular courses in Mathematical Control Theory are rarely included in the curricula of universities, and very few researchers receive enough background in the field. Therefore it is important to organize specific activities in the form of schools to provide the necessary background for those embarking on research in this field. The school at the Abdus Salam ICTP consisted of several minicourses intended to provide an introduction to various topics of Mathematical Control Theory, including Linear Control Theory (finite and infinite-dimensional), Nonlinear Control, and Optimal Control. The last week of the school was concentrated on applications of Mathematical Control Theory, in particular, those which are important for the development of non-industrialized countries. The school was intended primarily for mathematicians and mathematically oriented engineers at the beginning of their career. The typical participant was expected to be a graduate student or young post-doctoral researcher interested in Mathematical Control Theory. It was assumed that participants have sufficient background in Ordinary Differential Equations and Advanced Calculus. The volume

Mathematical control theory

Energy Technology Data Exchange (ETDEWEB)

Agrachev, A A [Steklov Mathematical Institute, Moscow (Russian Federation); SISSA, Trieste [Italy; ed.

2002-07-15

This volume is based on the lecture notes of the minicourses given in the frame of the school on Mathematical Control Theory held at the Abdus Salam ICTP from 3 to 28 September 2001. Mathematical Control Theory is a rapidly growing field which provides strict theoretical and computational tools for dealing with problems arising in electrical and aerospace engineering, automatics, tics, applied chemistry, and biology etc. Control methods are also involved in questions pertaining to the development of countries in the South, such as wastewater treatment, agronomy, epidemiology, population dynamics, control of industrial and natural bio-reactors. Since most of these natural processes are highly nonlinear, the tools of nonlinear control are essential for the modelling and control of such processes. At present regular courses in Mathematical Control Theory are rarely included in the curricula of universities, and very few researchers receive enough background in the field. Therefore it is important to organize specific activities in the form of schools to provide the necessary background for those embarking on research in this field. The school at the Abdus Salam ICTP consisted of several minicourses intended to provide an introduction to various topics of Mathematical Control Theory, including Linear Control Theory (finite and infinite-dimensional), Nonlinear Control, and Optimal Control. The last week of the school was concentrated on applications of Mathematical Control Theory, in particular, those which are important for the development of non-industrialized countries. The school was intended primarily for mathematicians and mathematically oriented engineers at the beginning of their career. The typical participant was expected to be a graduate student or young post-doctoral researcher interested in Mathematical Control Theory. It was assumed that participants have sufficient background in Ordinary Differential Equations and Advanced Calculus. The volume contains

Radiological control manual. Revision 1

Energy Technology Data Exchange (ETDEWEB)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

Radiological control manual. Revision 1

International Nuclear Information System (INIS)

Kloepping, R.

1996-05-01

This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP

The LHCb Run Control

Energy Technology Data Exchange (ETDEWEB)

Alessio, F; Barandela, M C; Frank, M; Gaspar, C; Herwijnen, E v; Jacobsson, R; Jost, B; Neufeld, N; Sambade, A; Schwemmer, R; Somogyi, P [CERN, 1211 Geneva 23 (Switzerland); Callot, O [LAL, IN2P3/CNRS and Universite Paris 11, Orsay (France); Duval, P-Y [Centre de Physique des Particules de Marseille, Aix-Marseille Universite, CNRS/IN2P3, Marseille (France); Franek, B [Rutherford Appleton Laboratory, Chilton, Didcot, OX11 0QX (United Kingdom); Galli, D, E-mail: Clara.Gaspar@cern.c [Universita di Bologna and INFN, Bologna (Italy)

2010-04-01

LHCb has designed and implemented an integrated Experiment Control System. The Control System uses the same concepts and the same tools to control and monitor all parts of the experiment: the Data Acquisition System, the Timing and the Trigger Systems, the High Level Trigger Farm, the Detector Control System, the Experiment's Infrastructure and the interaction with the CERN Technical Services and the Accelerator. LHCb's Run Control, the main interface used by the experiment's operator, provides access in a hierarchical, coherent and homogeneous manner to all areas of the experiment and to all its sub-detectors. It allows for automated (or manual) configuration and control, including error recovery, of the full experiment in its different running modes. Different instances of the same Run Control interface are used by the various sub-detectors for their stand-alone activities: test runs, calibration runs, etc. The architecture and the tools used to build the control system, the guidelines and components provided to the developers, as well as the first experience with the usage of the Run Control will be presented

An alternative method for noise analysis using pixel variance as part of quality control procedures on digital mammography systems.

NARCIS (Netherlands)

Bouwman, R.; Young, K.; Lazzari, B.; Ravaglia, V.; Broeders, M.J.M.; Engen, R. van

2009-01-01

According to the European Guidelines for quality assured breast cancer screening and diagnosis, noise analysis is one of the measurements that needs to be performed as part of quality control procedures on digital mammography systems. However, the method recommended in the European Guidelines does

The MAJORANA Parts Tracking Database

Science.gov (United States)

Abgrall, N.; Aguayo, E.; Avignone, F. T.; Barabash, A. S.; Bertrand, F. E.; Brudanin, V.; Busch, M.; Byram, D.; Caldwell, A. S.; Chan, Y.-D.; Christofferson, C. D.; Combs, D. C.; Cuesta, C.; Detwiler, J. A.; Doe, P. J.; Efremenko, Yu.; Egorov, V.; Ejiri, H.; Elliott, S. R.; Esterline, J.; Fast, J. E.; Finnerty, P.; Fraenkle, F. M.; Galindo-Uribarri, A.; Giovanetti, G. K.; Goett, J.; Green, M. P.; Gruszko, J.; Guiseppe, V. E.; Gusev, K.; Hallin, A. L.; Hazama, R.; Hegai, A.; Henning, R.; Hoppe, E. W.; Howard, S.; Howe, M. A.; Keeter, K. J.; Kidd, M. F.; Kochetov, O.; Konovalov, S. I.; Kouzes, R. T.; LaFerriere, B. D.; Leon, J. Diaz; Leviner, L. E.; Loach, J. C.; MacMullin, J.; Martin, R. D.; Meijer, S. J.; Mertens, S.; Miller, M. L.; Mizouni, L.; Nomachi, M.; Orrell, J. L.; O`Shaughnessy, C.; Overman, N. R.; Petersburg, R.; Phillips, D. G.; Poon, A. W. P.; Pushkin, K.; Radford, D. C.; Rager, J.; Rielage, K.; Robertson, R. G. H.; Romero-Romero, E.; Ronquest, M. C.; Shanks, B.; Shima, T.; Shirchenko, M.; Snavely, K. J.; Snyder, N.; Soin, A.; Suriano, A. M.; Tedeschi, D.; Thompson, J.; Timkin, V.; Tornow, W.; Trimble, J. E.; Varner, R. L.; Vasilyev, S.; Vetter, K.; Vorren, K.; White, B. R.; Wilkerson, J. F.; Wiseman, C.; Xu, W.; Yakushev, E.; Young, A. R.; Yu, C.-H.; Yumatov, V.; Zhitnikov, I.

2015-04-01

The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of 76Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provide a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

The MAJORANA Parts Tracking Database

Energy Technology Data Exchange (ETDEWEB)

Abgrall, N. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Aguayo, E. [Pacific Northwest National Laboratory, Richland, WA (United States); Avignone, F.T. [Department of Physics and Astronomy, University of South Carolina, Columbia, SC (United States); Oak Ridge National Laboratory, Oak Ridge, TN (United States); Barabash, A.S. [Institute for Theoretical and Experimental Physics, Moscow (Russian Federation); Bertrand, F.E. [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Brudanin, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Busch, M. [Department of Physics, Duke University, Durham, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Byram, D. [Department of Physics, University of South Dakota, Vermillion, SD (United States); Caldwell, A.S. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Chan, Y-D. [Nuclear Science Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Christofferson, C.D. [South Dakota School of Mines and Technology, Rapid City, SD (United States); Combs, D.C. [Department of Physics, North Carolina State University, Raleigh, NC (United States); Triangle Universities Nuclear Laboratory, Durham, NC (United States); Cuesta, C.; Detwiler, J.A.; Doe, P.J. [Center for Experimental Nuclear Physics and Astrophysics, and Department of Physics, University of Washington, Seattle, WA (United States); Efremenko, Yu. [Department of Physics and Astronomy, University of Tennessee, Knoxville, TN (United States); Egorov, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Ejiri, H. [Research Center for Nuclear Physics and Department of Physics, Osaka University, Ibaraki, Osaka (Japan); Elliott, S.R. [Los Alamos National Laboratory, Los Alamos, NM (United States); and others

2015-04-11

The MAJORANA DEMONSTRATOR is an ultra-low background physics experiment searching for the neutrinoless double beta decay of {sup 76}Ge. The MAJORANA Parts Tracking Database is used to record the history of components used in the construction of the DEMONSTRATOR. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provide a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

Control of Linear Parameter Varying Systems with Applications

CERN Document Server

Mohammadpour, Javad

2012-01-01

Control of Linear Parameter Varying Systems with Applications compiles state-of-the-art contributions on novel analytical and computational methods to address system modeling and identification, complexity reduction, performance analysis and control design for time-varying and nonlinear systems in the LPV framework. The book has an interdisciplinary character by emphasizing techniques that can be commonly applied in various engineering fields. It also includes a rich collection of illustrative applications in diverse domains to substantiate the effectiveness of the design methodologies and provide pointers to open research directions. The book is divided into three parts. The first part collects chapters of a more tutorial character on the background of LPV systems modeling and control. The second part gathers chapters devoted to the theoretical advancement of LPV analysis and synthesis methods to cope with the design constraints such as uncertainties and time delay. The third part of the volume showcases con...

Mental Health Insurance Parity and Provider Wages.

Science.gov (United States)

Golberstein, Ezra; Busch, Susan H

2017-06-01

Policymakers frequently mandate that employers or insurers provide insurance benefits deemed to be critical to individuals' well-being. However, in the presence of private market imperfections, mandates that increase demand for a service can lead to price increases for that service, without necessarily affecting the quantity being supplied. We test this idea empirically by looking at mental health parity mandates. This study evaluated whether implementation of parity laws was associated with changes in mental health provider wages. Quasi-experimental analysis of average wages by state and year for six mental health care-related occupations were considered: Clinical, Counseling, and School Psychologists; Substance Abuse and Behavioral Disorder Counselors; Marriage and Family Therapists; Mental Health Counselors; Mental Health and Substance Abuse Social Workers; and Psychiatrists. Data from 1999-2013 were used to estimate the association between the implementation of state mental health parity laws and the Paul Wellstone and Pete Domenici Mental Health Parity and Addiction Equity Act and average mental health provider wages. Mental health parity laws were associated with a significant increase in mental health care provider wages controlling for changes in mental health provider wages in states not exposed to parity (3.5 percent [95% CI: 0.3%, 6.6%]; pwages. Health insurance benefit expansions may lead to increased prices for health services when the private market that supplies the service is imperfect or constrained. In the context of mental health parity, this work suggests that part of the value of expanding insurance benefits for mental health coverage was captured by providers. Given historically low wage levels of mental health providers, this increase may be a first step in bringing mental health provider wages in line with parallel health professions, potentially reducing turnover rates and improving treatment quality.

Predicting substance-abuse treatment providers' communication with clients about medication assisted treatment: a test of the theories of reasoned action and planned behavior.

Science.gov (United States)

Roberto, Anthony J; Shafer, Michael S; Marmo, Jennifer

2014-01-01

The purpose of this investigation is to determine if the theory of reasoned action (TRA) and theory of planned behavior (TPB) can retrospectively predict whether substance-abuse treatment providers encourage their clients to use medicated-assisted treatment (MAT) as part of their treatment plan. Two-hundred and ten substance-abuse treatment providers completed a survey measuring attitudes, subjective norms, perceived behavioral control, intentions, and behavior. Results indicate that substance-abuse treatment providers have very positive attitudes, neutral subjective norms, somewhat positive perceived behavioral control, somewhat positive intentions toward recommending MAT as part of their clients' treatment plan, and were somewhat likely to engage in the actual behavior. Further, the data fit both the TRA and TPB, but with the TPB model having better fit and predictive power for this target audience and behavior. The theoretical and practical implications for the developing messages for substance-abuse treatment providers and other health-care professionals who provide treatment to patients with substance use disorders are discussed. Copyright © 2014 Elsevier Inc. All rights reserved.

Process control guidelines for CY 70 thorium campaign

International Nuclear Information System (INIS)

Jackson, R.R.

1970-01-01

The report comprises five parts, with part I being an introduction. Part II consists of a general treatment of process control methods. Parts III through V discuss, in the flowsheet sequence, those problems pertinent to each equipment piece or system and provide operating guidelines. Specific operations that are somewhat different from those normally encountered in Purex are discussed at length. Operations routine to Purex can be found in the pertinent standard operating procedures. Part VI describes in general terms the sequence to be followed in initiating and completing a variety of transient conditions

AUTltORITY CONTROL REGARDING CHINESE PERSONAL NAMES：Enhancement and Linkage with the Bibliographic Database

Institute of Scientific and Technical Information of China (English)

AbrahamJ.Yu

1994-01-01

Authority control is critical for the quality of the bibliographic database. Authority control is important in guiding users from variant forms of headings to the controlled forms of headings and providing users with the related headings. With authority control, the forms of headings in the bibliographic records are consista,t and easy to access. Authority control not only increases the accuracy of searching but also makes retrieving records from the online bibliographic database easier. In the first part of the paper, the author brings out three formats for Chinese personal names in the online environment. Tire second part presents a new model for better authority control regarding Chinese presonal names. In the last part, the author emphasizes the importance of linking the online authority records with the bibliographic database. The quality of the database can be improved dramatically by providing vernacular access capability to the name authorty, records and ensuring that every personal name heading in the bibliographic records have corresponding Library of Congress name authority records。

Distributed Smart Grid Asset Control Strategies for Providing Ancillary Services

Energy Technology Data Exchange (ETDEWEB)

Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Marinovici, Laurentiu D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Moya, Christian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dagle, Jeffery E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2013-10-30

With large-scale plans to integrate renewable generation driven mainly by state-level renewable portfolio requirements, more resources will be needed to compensate for the uncertainty and variability associated with intermittent generation resources. Distributed assets can be used to mitigate the concerns associated with renewable energy resources and to keep costs down. Under such conditions, performing primary frequency control using only supply-side resources becomes not only prohibitively expensive but also technically difficult. It is therefore important to explore how a sufficient proportion of the loads could assume a routine role in primary frequency control to maintain the stability of the system at an acceptable cost. The main objective of this project is to develop a novel hierarchical distributed framework for frequency based load control. The framework involves two decision layers. The top decision layer determines the optimal gain for aggregated loads for each load bus. The gains are computed using decentralized robust control methods, and will be broadcast to the corresponding participating loads every control period. The second layer consists of a large number of heterogeneous devices, which switch probabilistically during contingencies so that aggregated power change matches the desired amount according to the most recently received gains. The simulation results show great potential to enable systematic design of demand-side primary frequency control with stability guarantees on the overall power system. The proposed design systematically accounts for the interactions between the total load response and bulk power system frequency dynamics. It also guarantees frequency stability under a wide range of time varying operating conditions. The local device-level load response rules fully respect the device constraints (such as temperature setpoint, compressor time delays of HVACs, or arrival and departure of the deferrable loads), which are crucial for

Radiation protection at the RA Reactor in 1994. Part 2, Annex 1, Control of the working environment, dosimetry and radiation protection

International Nuclear Information System (INIS)

Pavlovic, R.; Kalinic, S.

1994-01-01

This report contains data and analysis of the of measured sample results collected during radiation protection control in the working environment of the RA reactor. First part contains basic exposure values and statistical review of the the total number of radiation measurements. It includes contents of radioactive gasses and effluents in the air, as well as the level of surface contamination of clothes and uncovered parts of the personnel bodies. Second part deals with the analysis of personnel doses. Third part of this annex contains basic data about the quantity of collected radioactive waste, total quantity of contaminated and decontaminated surfaces. It is stated that there have been no accidents that could cause significant contamination of working surfaces and components nor radiation exposure of the personnel [sr

An accelerator controls network designed for reliability and flexibility

International Nuclear Information System (INIS)

McDowell, W. P.; Sidorowicz, K. V.

1997-01-01

The APS accelerator control system is a typical modern system based on the standard control system model, which consists of operator interfaces to a network and computer-controlled interfaces to hardware. The network provides a generalized communication path between the host computers, operator workstations, input/output crates, and other hardware that comprise the control system. The network is an integral part of all modern control systems and network performance will determine many characteristics of a control system. This paper describes the methods used to provide redundancy for various network system components as well as methods used to provide comprehensive monitoring of this network. The effect of archiving tens of thousands of data points on a regular basis and the effect on the controls network will be discussed. Metrics are provided on the performance of the system under various conditions

Combining Modeling and Monitoring to Produce a New Paradigm of an Integrated Approach to Providing Long-Term Control of Contaminants

Science.gov (United States)

Fogwell, T. W.

2009-12-01

Sir David King, Chief Science Advisor to the British government and Cambridge University Professor, stated in October 2005, "The scientific community is considerably more capable than it has been in the past to assist governments to avoid and reduce risk to their own populations. Prime ministers and presidents ignore the advice from the science community at the peril of their own populations." Some of these greater capabilities can be found in better monitoring techniques applied to better modeling methods. These modeling methods can be combined with the information derived from monitoring data in order to decrease the risk of population exposure to dangerous substances and to promote efficient control or cleanup of the contaminants. An introduction is presented of the types of problems that exist for long-term control of radionuclides at DOE sites. A breakdown of the distributions at specific sites is given, together with the associated difficulties. A paradigm for remediation showing the integration of monitoring with modeling is presented. It is based on a feedback system that allows for the monitoring to act as principal sensors in a control system. The resulting system can be optimized to improve performance. Optimizing monitoring automatically entails linking the monitoring with modeling. If monitoring designs were required to be more efficient, thus requiring optimization, then the monitoring automatically becomes linked to modeling. Records of decision could be written to accommodate revisions in monitoring as better modeling evolves. Currently the establishment of a very prescriptive monitoring program fails to have a mechanism for improving models and improving control of the contaminants. The technical pieces of the required paradigm are already available; they just need to be implemented and applied to solve the long-term control of the contaminants. An integration of the various parts of the system is presented. Each part is described, and examples are

Forced-Air Warming Provides Better Control of Body Temperature in Porcine Surgical Patients

Directory of Open Access Journals (Sweden)

Brian T. Dent

2016-09-01

Full Text Available Background: Maintaining normothermia during porcine surgery is critical in ensuring subject welfare and recovery, reducing the risk of immune system compromise and surgical-site infection that can result from hypothermia. In humans, various methods of patient heating have been demonstrated to be useful, but less evaluation has been performed in techniques to prevent hypothermia perioperatively in pigs. Methods: We compared body temperature regulation during surgery before and after modification of the ambient temperature of the operating laboratories. Three different methods of heating were then compared; a standard circulating water mattress, a resistive fabric blanket, and a forced hot air system. The primary measure was percentage of temperature readings outside a specification range of 36.7–40.0 °C. Results: Tighter control of the ambient temperature while using a circulating water mattress reduced the occurrence of out-of-specification body temperature readings from 20.8% to 5.0%, with most of these the result of hypothermia. Use of a resistive fabric blanket further reduced out-of-specification readings to 1.5%, with a slight increase in the occurrence of hyperthermia. Use of a forced air system reduced out-of-specification readings to less 0.1%. Conclusions: Maintenance of normothermia perioperatively in pig can be improved by tightly controlling ambient temperatures. Use of a resistive blanket or a forced air system can lead to better control than a circulating water mattress, with the forced air system providing a faster response to temperature variations and less chance of hyperthermia.

Providing all global energy with wind, water, and solar power, Part II: Reliability, system and transmission costs, and policies

International Nuclear Information System (INIS)

Delucchi, Mark A.; Jacobson, Mark Z.

2011-01-01

This is Part II of two papers evaluating the feasibility of providing all energy for all purposes (electric power, transportation, and heating/cooling), everywhere in the world, from wind, water, and the sun (WWS). In Part I, we described the prominent renewable energy plans that have been proposed and discussed the characteristics of WWS energy systems, the global demand for and availability of WWS energy, quantities and areas required for WWS infrastructure, and supplies of critical materials. Here, we discuss methods of addressing the variability of WWS energy to ensure that power supply reliably matches demand (including interconnecting geographically dispersed resources, using hydroelectricity, using demand-response management, storing electric power on site, over-sizing peak generation capacity and producing hydrogen with the excess, storing electric power in vehicle batteries, and forecasting weather to project energy supplies), the economics of WWS generation and transmission, the economics of WWS use in transportation, and policy measures needed to enhance the viability of a WWS system. We find that the cost of energy in a 100% WWS will be similar to the cost today. We conclude that barriers to a 100% conversion to WWS power worldwide are primarily social and political, not technological or even economic. - Research highlights: → We evaluate the feasibility of global energy supply from wind, water, and solar energy. → WWS energy can be supplied reliably and economically to all energy-use sectors. → The social cost of WWS energy generally is less than the cost of fossil-fuel energy. → Barriers to 100% WWS power worldwide are socio-political, not techno-economic.

A new robust adaptive controller for vibration control of active engine mount subjected to large uncertainties

International Nuclear Information System (INIS)

Fakhari, Vahid; Choi, Seung-Bok; Cho, Chang-Hyun

2015-01-01

This work presents a new robust model reference adaptive control (MRAC) for vibration control caused from vehicle engine using an electromagnetic type of active engine mount. Vibration isolation performances of the active mount associated with the robust controller are evaluated in the presence of large uncertainties. As a first step, an active mount with linear solenoid actuator is prepared and its dynamic model is identified via experimental test. Subsequently, a new robust MRAC based on the gradient method with σ-modification is designed by selecting a proper reference model. In designing the robust adaptive control, structured (parametric) uncertainties in the stiffness of the passive part of the mount and in damping ratio of the active part of the mount are considered to investigate the robustness of the proposed controller. Experimental and simulation results are presented to evaluate performance focusing on the robustness behavior of the controller in the face of large uncertainties. The obtained results show that the proposed controller can sufficiently provide the robust vibration control performance even in the presence of large uncertainties showing an effective vibration isolation. (paper)

Applied predictive control

CERN Document Server

Sunan, Huang; Heng, Lee Tong

2002-01-01

The presence of considerable time delays in the dynamics of many industrial processes, leading to difficult problems in the associated closed-loop control systems, is a well-recognized phenomenon. The performance achievable in conventional feedback control systems can be significantly degraded if an industrial process has a relatively large time delay compared with the dominant time constant. Under these circumstances, advanced predictive control is necessary to improve the performance of the control system significantly. The book is a focused treatment of the subject matter, including the fundamentals and some state-of-the-art developments in the field of predictive control. Three main schemes for advanced predictive control are addressed in this book: • Smith Predictive Control; • Generalised Predictive Control; • a form of predictive control based on Finite Spectrum Assignment. A substantial part of the book addresses application issues in predictive control, providing several interesting case studie...

Intraclass reliability for assessing how well Taiwan constrained hospital-provided medical services using statistical process control chart techniques.

Science.gov (United States)

Chien, Tsair-Wei; Chou, Ming-Ting; Wang, Wen-Chung; Tsai, Li-Shu; Lin, Weir-Sen

2012-05-15

Few studies discuss the indicators used to assess the effect on cost containment in healthcare across hospitals in a single-payer national healthcare system with constrained medical resources. We present the intraclass correlation coefficient (ICC) to assess how well Taiwan constrained hospital-provided medical services in such a system. A custom Excel-VBA routine to record the distances of standard deviations (SDs) from the central line (the mean over the previous 12 months) of a control chart was used to construct and scale annual medical expenditures sequentially from 2000 to 2009 for 421 hospitals in Taiwan to generate the ICC. The ICC was then used to evaluate Taiwan's year-based convergent power to remain unchanged in hospital-provided constrained medical services. A bubble chart of SDs for a specific month was generated to present the effects of using control charts in a national healthcare system. ICCs were generated for Taiwan's year-based convergent power to constrain its medical services from 2000 to 2009. All hospital groups showed a gradually well-controlled supply of services that decreased from 0.772 to 0.415. The bubble chart identified outlier hospitals that required investigation of possible excessive reimbursements in a specific time period. We recommend using the ICC to annually assess a nation's year-based convergent power to constrain medical services across hospitals. Using sequential control charts to regularly monitor hospital reimbursements is required to achieve financial control in a single-payer nationwide healthcare system.

Parts, Materials, and Processes Control Program for Expendable Launch Vehicles

Science.gov (United States)

2015-05-21

cycle cost ; and 4. Improve procurement and test of small quantities of parts and materials that meet system requirements. This document supersedes...the reliability of program PMP to reduce PMP failures at all levels of assembly and test 3. Reduce program lifecycle cost 4. Improve procurement and...part shall be procured in single lots directly from the manufacturer or its authorized franchised distributor. The contractor shall be able to

Ipsilateral transversus abdominis plane block provides effective analgesia after appendectomy in children: a randomized controlled trial.

LENUS (Irish Health Repository)

Carney, John

2010-10-01

The transversus abdominis plane (TAP) block provides effective postoperative analgesia in adults undergoing major abdominal surgery. Its efficacy in children remains unclear, with no randomized clinical trials in this population. In this study, we evaluated its analgesic efficacy over the first 48 postoperative hours after appendectomy performed through an open abdominal incision, in a randomized, controlled, double-blind clinical trial.

Radiological Control Manual. Revision 0, January 1993

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

49 CFR 192.631 - Control room management.

Science.gov (United States)

2010-10-01

... control room who monitors and controls all or part of a pipeline facility through a SCADA system. Each... sections 1, 4, 8, 9, 11.1, and 11.3 of API RP 1165 are not practical for the SCADA system used; (2) Conduct... or SCADA displays; (3) Test and verify an internal communication plan to provide adequate means for...

Bio boiler - Control conditions. Part 1: Model development and analysis of operating conditions; Biokedel - Reguleringsmaessige forhold. Del 1: Modeludvikling og analyse af dynamiske driftsforhold

Energy Technology Data Exchange (ETDEWEB)

Boecher Poulsen, K.; Christensen, Torkild; Mortensen, Jan; Runge Kristoffersen, J.; Kristmundsson, E. [Tech-wise A/S (Denmark); Moekbak, T.; Mortensen, Hans Peter [Elsam A/S (Denmark)

2002-12-15

This report focuses on the model-building part of the PSO project, 'Control Conditions Bio-boiler'. In the project, which treats dynamic simulation of biomass fired power plants via the MMS software, a certain number of straw/wood chip modules have been built, together with a combustion module which, when connected to the existing MMS modules, can be used for dynamic simulation. Furthermore, a certain number of continuous and discrete components have been built which, together with the remaining MMS modules will create a complete model of the active part of the control structure under the most common operation conditions. By means of the developed straw, combustion and control modules, a model of Enstedvaerket's bio-boiler is built (without wood chip super-heater), including practically all auxiliary control mechanisms. In the report the primary problems caused by the development of the model are discussed, typically numerical problems. First of all it is discussed how a steady state condition can be reached from a nonphysical condition at the start-up of the simulation. After reaching a steady state condition at full load, the boiler load is reduced by adjusting the desired live steam flow setpoint value and the load gradient (as it would be done from the control room). While reducing to part load, one straw line is closed down, as it would be done in 'real life'. From part load, the boiler load is once again in the same way increased to full. (BA) The simulation results are then compared to measurements made on the same boiler during load reduction and load increase.

Control rod assembly

International Nuclear Information System (INIS)

Takahashi, Akio.

1982-01-01

Purpose: To enable reliable insertion and drops of control rods, as well as insure a sufficient flow rate of coolants flowing through the control rods for attaining satisfactory cooling thereof to enable relexation of thermal stress resulted to rectifying mechanisms or the likes. Constitution: To the outer circumference of a control rod contained vertically movably within a control rod guide tube, resistive members are retractably provided in such a way as to project to close the gap between outer circumference of the control rod and the inner surface of the control rod guide tube upon engagement of a gripper of control rod drives, and retract upon release of the engagement of the gripper. Thus, since the resistive members project to provide a greater resistance to the coolants flowing between them and the control rod guide tube in the normal operation where the gripper is engaged to drive the control rod by the control rod drives, a major part of the coolant flowing into the control rod guide tube flows into the control rod. This enables to cool the control rod effectively and make the temperature distribution uniform for the coolant flowing from the upper end of the control rod guide tube to thereby attain the relaxation of the thermal stress resulted in the rectifying mechanisms or the likes. (Moriyama, K.)

42 CFR 456.1 - Basis and purpose of part.

Science.gov (United States)

2010-10-01

... admission review) 1902(a)(30)1903(g)(1)(C) 1903(i)(4) Subpart D—Utilization Control: Mental Hospitals... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL General Provisions § 456.1 Basis and purpose of part. (a) This part prescribes requirements concerning control of the utilization of Medicaid services...

Filtering and control of wireless networked systems

CERN Document Server

Zhang, Dan; Yu, Li

2017-01-01

This self-contained book, written by leading experts, offers a cutting-edge, in-depth overview of the filtering and control of wireless networked systems. It addresses the energy constraint and filter/controller gain variation problems, and presents both the centralized and the distributed solutions. The first two chapters provide an introduction to networked control systems and basic information on system analysis. Chapters (3–6) then discuss the centralized filtering of wireless networked systems, presenting different approaches to deal with energy efficiency and filter/controller gain variation problems. The next part (chapters 7–10) explores the distributed filtering of wireless networked systems, addressing the main problems of energy constraint and filter gain variation. The final part (chapters 11–14) focuses on the distributed control of wireless networked systems. control applications, the bo...

Study protocol for a randomised controlled trial to test the effectiveness of providing information on childbirth and postnatal period to partners of pregnant women.

Science.gov (United States)

Takehara, Kenji; Okamura, Makoto; Sugiura, Naomi; Suto, Maiko; Sasaki, Hatoko; Mori, Rintaro

2016-07-27

The objective of this study is to investigate the effect of the distribution of a booklet providing information to fathers during their partners' pregnancies on fathers' and mothers' postpartum mental health and quality of life (QOL), as well as on fathers' childcare participation and living situations. This randomised controlled trial will comprise 554 couples consisting of pregnant women due to give birth at an obstetric institution in Aichi Prefecture, Japan and their partners. Participants will be recruited during prenatal check-ups in the third trimester, and those who provide written consent will be allocated randomly to an intervention and a control group. The pregnant women's partners allocated to the intervention group will be given a booklet written for men containing information on childbirth and postnatal period. Its content will include matters such as what preparations the partner should make before birth and tips for housework and childcare as well as how to prevent unintentional injury to the baby. The control group will not receive any intervention. A baseline survey in the third trimester and follow-up surveys at 1 and 3 months post partum will be carried out using self-administered questionnaires. The primary outcome is the proportion of new mothers' partners at risk for paternal depression (Edinburgh Postnatal Depression Scale score ≥8). Secondary outcomes include the risk of postnatal depression in new mothers, QOL of new mothers and their partners, partners' knowledge of and engagement in housework and childcare, marital relations and parenting stress on the part of new mothers. This study has been approved by the Ethical Committee at the National Center for Child Health and Development, Tokyo, Japan. The results of the study will be widely disseminated as peer-reviewed papers and at international conferences, with the aim of improving public health services in Japan. UMIN000021475; Pre-results. Published by the BMJ Publishing Group

40 CFR 3.2 - How does this part provide for electronic reporting?

Science.gov (United States)

2010-07-01

... electronic document provided that the state, tribe, or local government seeks and obtains revision or... electronic reporting. (2) A state, tribe, or local government that is applying for initial delegation... obligate EPA, states, tribes, or local governments to accept electronic documents. ...

Implementation of client versus care-provider strategies to improve external cephalic version rates: a cluster randomized controlled trial

NARCIS (Netherlands)

Vlemmix, Floortje; Rosman, Ageeth N.; Rijnders, Marlies E.; Beuckens, Antje; Opmeer, Brent C.; Mol, Ben W. J.; Kok, Marjolein; Fleuren, Margot A. H.

2015-01-01

To determine the effectiveness of a client or care-provider strategy to improve the implementation of external cephalic version. Cluster randomized controlled trial. Twenty-five clusters; hospitals and their referring midwifery practices randomly selected in the Netherlands. Singleton breech

Implementation of client versus care-provider strategies to improve external cephalic version rates: a cluster randomized controlled trial

NARCIS (Netherlands)

Vlemmix, F.; Rosman, A.N.; Rijnders, M.E.; Beuckens, A.; Opmeer, B.C.; Mol, B.W.J.; Kok, M.; Fleuren, M.A.H.

2015-01-01

Onjective: To determine the effectiveness of a client or care-provider strategy to improve the implementation of external cephalic version. Design: Cluster randomized controlled trial.Setting: Twenty-five clusters; hospitals and their referring midwifery practices randomly selected in the

Tautological control systems

CERN Document Server

Lewis, Andrew D

2014-01-01

This brief presents a description of a new modelling framework for nonlinear/geometric control theory. The framework is intended to be—and shown to be—feedback-invariant. As such, Tautological Control Systems provides a platform for understanding fundamental structural problems in geometric control theory. Part of the novelty of the text stems from the variety of regularity classes, e.g., Lipschitz, finitely differentiable, smooth, real analytic, with which it deals in a comprehensive and unified manner. The treatment of the important real analytic class especially reflects recent work on real analytic topologies by the author. Applied mathematicians interested in nonlinear and geometric control theory will find this brief of interest as a starting point for work in which feedback invariance is important. Graduate students working in control theory may also find Tautological Control Systems to be a stimulating starting point for their research.

Multiple part feeding

DEFF Research Database (Denmark)

Hvilshøj, Mads; Bøgh, Simon; Nielsen, Oluf Skov

2012-01-01

" is capable of successfully servicing four part feeders in three production cells using command signals from an Open Process Control (OPC) server. Furthermore, the paper presents future research and development suggestions for AIMM, which contributes to near-term industrial maturation and implementation...

Optimal control of building storage systems using both ice storage and thermal mass – Part I: Simulation environment

International Nuclear Information System (INIS)

Hajiah, Ali; Krarti, Moncef

2012-01-01

Highlights: ► A simulation environment is described to account for both passive and active thermal energy storage (TES) systems. ► Laboratory testing results have been used to validate the predictions from the simulation environment. ► Optimal control strategies for TES systems have been developed as part of the simulation environment. - Abstract: This paper presents a simulation environment that can evaluate the benefits of using simultaneously building thermal capacitance and ice storage system to reduce total operating costs including energy and demand charges while maintaining adequate occupant comfort conditions within commercial buildings. The building thermal storage is controlled through pre-cooling strategies by setting space indoor air temperatures. The ice storage system is controlled by charging the ice tank and operating the chiller during low electrical charge periods and melting the ice during on-peak periods. Optimal controls for both building thermal storage and ice storage are developed to minimize energy charges, demand charges, or combined energy and demand charges. The results obtained from the simulation environment are validated using laboratory testing for an optimal controller.

Disk access controller for Multi 8 computer

International Nuclear Information System (INIS)

Segalard, Jean

1970-01-01

After having presented the initial characteristics and weaknesses of the software provided for the control of a memory disk coupled with a Multi 8 computer, the author reports the development and improvement of this controller software. He presents the different constitutive parts of the computer and the operation of the disk coupling and of the direct access to memory. He reports the development of the disk access controller: software organisation, loader, subprograms and statements

Sensory and cognitive neurophysiology in rats, Part 1: Controlled tactile stimulation and micro-ECoG recordings in freely moving animals.

Science.gov (United States)

Dimitriadis, George; Fransen, Anne M M; Maris, Eric

2014-07-30

We have developed a setup for rats that allows for controlled sensory input to an animal engaged in a task while recording both electrophysiological signals and behavioral output. We record electrophysiological signals using a novel high-density micro-electrocorticography (micro-ECoG) grid that covers almost the whole somatosensory system. We dealt with the well-known difficulty that the rat uses its whisker system in an active (motor-controlled) way to explore its environment by designing a head-mounted device that stimulates the rat's snout in a way unaffected by whisker movements. We replicate the spatial specificity of early evoked responses in somatosensory and auditory cortex. In a companion paper (Cognitive Neurophysiology in Rats, Part 2: Validation and Demonstration) we validate our setup and show for the first time that the ECoG can be used to record evoked responses in a signal that reflects neural output (spiking activity). Compared with high-density wire recordings, micro-ECoG offers a much more stable signal without readjustments, and a much better scalability. Compared with head-fixed preparations, our head-mounted stimulator allows to stay closer to the rat's natural way of collecting sensory information. For perceptual and cognitive research, our setup provides a unique combination of possibilities that cannot be achieved in other setups for rodents. Copyright © 2014 Elsevier B.V. All rights reserved.

Photovoltaic Powering And Control System For Electrochromic Windows

Science.gov (United States)

Schulz, Stephen C.; Michalski, Lech A.; Volltrauer, Hermann N.; Van Dine, John E.

2000-04-25

A sealed insulated glass unit is provided with an electrochromic device for modulating light passing through the unit. The electrochromic device is controlled from outside the unit by a remote control electrically unconnected to the device. Circuitry within the unit may be magnetically controlled from outside. The electrochromic device is powered by a photovoltaic cells. The photovoltaic cells may be positioned so that at least a part of the light incident on the cell passes through the electrochromic device, providing a form of feedback control. A variable resistance placed in parallel with the electrochromic element is used to control the response of the electrochromic element to changes in output of the photovoltaic cell.

Randomized, Controlled Trial of CBT Training for PTSD Providers

Science.gov (United States)

2016-10-01

implement and evaluate a cost effective, web based self-paced training program to provide skills- oriented continuing education for mental health...Product Aim(s) The purpose of this study is to design, implement and evaluate a web based training program providing skills- oriented continuing education ...Rates and Data Quality i. The team collaborated with the VHA NCPTSD to monitor the collection rates and data quality on a weekly basis . b. Create Interim

New Methodology for Optimal Flight Control using Differential Evolution Algorithms applied on the Cessna Citation X Business Aircraft – Part 2. Validation on Aircraft Research Flight Level D Simulator

Directory of Open Access Journals (Sweden)

Yamina BOUGHARI

2017-06-01

Full Text Available In this paper the Cessna Citation X clearance criteria were evaluated for a new Flight Controller. The Flight Control Law were optimized and designed for the Cessna Citation X flight envelope by combining the Deferential Evolution algorithm, the Linear Quadratic Regulator method, and the Proportional Integral controller during a previous research presented in part 1. The optimal controllers were used to reach satisfactory aircraft’s dynamic and safe flight operations with respect to the augmentation systems’ handling qualities, and design requirements. Furthermore the number of controllers used to control the aircraft in its flight envelope was optimized using the Linear Fractional Representations features. To validate the controller over the whole aircraft flight envelope, the linear stability, eigenvalue, and handling qualities criteria in addition of the nonlinear analysis criteria were investigated during this research to assess the business aircraft for flight control clearance and certification. The optimized gains provide a very good stability margins as the eigenvalue analysis shows that the aircraft has a high stability, and a very good flying qualities of the linear aircraft models are ensured in its entire flight envelope, its robustness is demonstrated with respect to uncertainties due to its mass and center of gravity variations.

Providing Comprehensive Educational Opportunity to Low Income Students. Part 5: A Proposal for Essential Standards and Resources. A Report of the Task Force on Comprehensive Educational Opportunity

Science.gov (United States)

Rebell, Michael A.; Wolff, Jessica R.

2011-01-01

This fifth in a five part series, states that, if comprehensive educational opportunity is conceived as a right, then the state must commit to providing it and must develop a policy infrastructure to assure broad access, uniform quality, regularized funding, and firm accountability strictures to ensure all students a meaningful opportunity to…

Development of an aging integrator for uranium-0.75 weight percent titanium alloy part aging control

International Nuclear Information System (INIS)

Howington, L.C.

1977-12-01

An instrumentation system (Aging Integrator) has been developed to provide more precise control of the heat-treatment process used on uranium-0.75 wt.% titanium alloy material. The Aging Integrator calculates the integral of a predetermined aging function to control the aging period in the heat-treatment process. This control was employed to compensate for discrepancies caused by variations in heatup times, furnace-control fluctuations, and disagreement as to the temperature at which aging actually starts. Although the Aging Integrator hardware has been installed and satisfactorily tested on a production-area furnace, sufficient data to estimate a statistically sound aging integration function will not be available for approximately one year

Usefulness of food chain information provided by Dutch finishing pig producers to control antibiotic residues in pork.

Science.gov (United States)

van Wagenberg, Coen P A; Backus, Gé B C; van der Vorst, Jack G A J; Urlings, Bert A P

2012-11-01

The EU prescribes that food business operators must use food chain information to assist in food safety control. This study analyses usefulness of food chain information about antibiotic usage covering the 60-day period prior to delivery of pigs to slaughter in the control of antibiotic residues in pork. A dataset with 479 test results for antibiotic residues in tissue samples of finishing pigs delivered to a Dutch slaughter company was linked to information provided by pig producers about antibiotic usage in these finishing pigs. Results show that twice as many producers reported using antibiotics in the group of 82 producers with antibiotic residues (11.0%) compared to the group without antibiotic residues (5.5%) (p=0.0686). For 89% of consignments with a finishing pig with antibiotic residues, the producer reported 'did not use antibiotics'. Food chain information about antibiotic usage provided by Dutch pig producers was no guarantee for absence of antibiotic residues in delivered finishing pigs. Copyright © 2012 Elsevier B.V. All rights reserved.

Separate individual control systems come together at EP2

International Nuclear Information System (INIS)

Podmore, A.

1991-01-01

At BNFL's EP2 radioactive waste encapsulation plant in the UK, eight area supervisory control and data acquisition systems (SCADAs) and one central SCADA are being installed to provide computer-controlled processing of waste drums. The individual systems are all autonomous, minimizing the effect they have on other areas of the process. At the same time, they are part of an integrated system which provides effective communication between the various areas. (author)

Parts Quality Management: Direct Part Marking of Data Matrix Symbol for Mission Assurance

Science.gov (United States)

Moss, Chantrice; Chakrabarti, Suman; Scott, David W.

2013-01-01

A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using direct part marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, Low Earth Orbit), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (label printing, data plates, and direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including inhouse vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

19th Polish Control Conference

CERN Document Server

Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

2017-01-01

This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

Opioid Prescribing Practices of Neurosurgeons: Analysis of Medicare Part D.

Science.gov (United States)

Khalid, Syed I; Adogwa, Owoicho; Lilly, Daniel T; Desai, Shyam A; Vuong, Victoria D; Mehta, Ankit I; Cheng, Joseph

2018-04-01

The Centers for Disease Control have declared that the United States is amidst a continuing opioid epidemic, with drug overdose-related death tripling between 1999 and 2014. Among the 47,055 overdose-related deaths that occurred in 2014, 28,647 (60.9%) of them involved an opioid. The Part D Prescriber Public Use File, which is based on beneficiaries enrolled in the Medicare Part D prescription drug program, was used to query information on prescription drug events incurred by Medicare beneficiaries with a Part D prescription drug plan from 31 June 2014 to 30 June 2015. Only those providers with the specialty description of neurosurgeon, as reported on the provider's Part B claims, were included in this study. A total of 271,502 beneficiaries, accounting for 971,581 claims and 22,152,689 day supplies of medication, accounted for the $52,956,428.40 paid by the Centers for Medicare and Medicaid Services for medication that the 4085 neurosurgeons submitted to the Centers for Medicare and Medicaid Services Part D program in the 2014 calendar year. During the same year, 402,767 (41.45%) claims for 158,749 (58.47%) beneficiaries accounted for 6,458,624 (29.16%) of the day supplies of medications and $13,962,630.11 (26.37%) of the total money spent by the Centers for Medicare and Medicaid Services Part D that year. Nationwide, the ratio of opioid claims to total Medicare Part D beneficiaries was 1.48. No statistically significant regional differences were found. The opioid misuse epidemic is a complex and national issue with patterns of prescription not significantly different between regions. All neurosurgeons must be cognizant of their prescribing practices so as to best support the resolution of this public health crisis. Copyright © 2017. Published by Elsevier Inc.

Final Report of the National Black Health Providers Task Force on High Blood Pressure Education and Control.

Science.gov (United States)

Public Health Service (DHHS), Rockville, MD.

This is the final report of National Black Health Providers Task Force (NBHPTF) on High Blood Pressure Education and Control. The first chapter of the report recounts the history of the NBHPTF and its objectives. In the second chapter epidemiological evidence is presented to demonstrate the need for a suggested 20 year plan aimed at controlling…

Nuclear material control systems for nuclear power plants

International Nuclear Information System (INIS)

1975-06-01

Paragraph 70.51(c) of 10 CFR Part 70 requires each licensee who is authorized to possess at any one time special nuclear material in a quantity exceeding one effective kilogram to establish, maintain, and follow written material control and accounting procedures that are sufficient to enable the licensee to account for the special nuclear material in his possession under license. While other paragraphs and sections of Part 70 provide specific requirements for nuclear material control systems for fuel cycle plants, such detailed requirements are not included for nuclear power reactors. This guide identifies elements acceptable to the NRC staff for a nuclear material control system for nuclear power reactors. (U.S.)

Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry

Directory of Open Access Journals (Sweden)

Mikdam Jamal

2017-12-01

Full Text Available Metal additive manufacturing (AM is increasingly used to create complex 3D components at near net shape. However, the surface finish (SF of the metal AM part is uneven, with surface roughness being variable over the facets of the design. Standard post-processing methods such as grinding and linishing often meet with major challenges in finishing parts of complex shape. This paper reports on research that demonstrated that mass finishing (MF processes are able to deliver high-quality surface finishes (Ra and Sa on AM-generated parts of a relatively complex geometry (both internal features and external facets under select conditions. Four processes were studied in this work: stream finishing, high-energy (HE centrifuge, drag finishing and disc finishing. Optimisation of the drag finishing process was then studied using a structured design of experiments (DOE. The effects of a range of finishing parameters were evaluated and optimal parameters and conditions were determined. The study established that the proposed method can be successfully applied in drag finishing to optimise the surface roughness in an industrial application and that it is an economical way of obtaining the maximum amount of information in a short period of time with a small number of tests. The study has also provided an important step in helping understand the requirements of MF to deliver AM-generated parts to a target quality finish and cycle time.

Redox control of electric melters with complex feed compositions. Part I: analytical methods and models

International Nuclear Information System (INIS)

Bickford, D.F.; Diemer, R.B. Jr.

1985-01-01

The redox state of glass from electric melters with complex feed compositions is determined by balance between gases above the melt, and transition metals and organic compounds in the feed. Part I discusses experimental and computational methods of relating flowrates and other melter operating conditions to the redox state of glass, and composition of the melter offgas. Computerized thermodynamic computational methods are useful in predicting the sequence and products of redox reactions and in assessing individual process variations. Melter redox state can be predicted by combining monitoring of melter operating conditions, redox measurement of fused melter feed samples, and periodic redox measurement of product. Mossbauer spectroscopy, and other methods which measure Fe(II)/Fe(III) in glass, can be used to measure melter redox state. Part II develops preliminary operating limits for the vitrification of High-Level Radioactive Waste. Limits on reducing potential to preclude the accumulation of combustible gases, accumulation of sulfides and selenides, and degradation of melter components are the most critical. Problems associated with excessively oxidizing conditions, such as glass foaming and potential ruthenium volatility, are controlled when sufficient formic acid is added to adjust melter feed rheology

Co-providing: understanding the logistics.

Science.gov (United States)

Dickerson, Pamela S

2011-11-01

Continuing nursing education providers have sometimes said that they don't want to co-provide because "it's too much trouble" or they "won't be able to control what happens" or because they don't understand the process. This column clarifies the logistics of the co-provider relationship. Copyright 2011, SLACK Incorporated.

40 CFR 75.34 - Units with add-on emission controls.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Units with add-on emission controls... add-on emission controls. (a) The owner or operator of an affected unit equipped with add-on SO2 and... assurance/quality control program for the unit, required by section 1 in appendix B of this part. To provide...

Providing all global energy with wind, water, and solar power, Part I: Technologies, energy resources, quantities and areas of infrastructure, and materials

Energy Technology Data Exchange (ETDEWEB)

Jacobson, Mark Z., E-mail: jacobson@stanford.ed [Department of Civil and Environmental Engineering, Stanford University, Stanford, CA 94305-4020 (United States); Delucchi, Mark A., E-mail: madelucchi@ucdavis.ed [Institute of Transportation Studies, University of California at Davis, Davis, CA 95616 (United States)

2011-03-15

Climate change, pollution, and energy insecurity are among the greatest problems of our time. Addressing them requires major changes in our energy infrastructure. Here, we analyze the feasibility of providing worldwide energy for all purposes (electric power, transportation, heating/cooling, etc.) from wind, water, and sunlight (WWS). In Part I, we discuss WWS energy system characteristics, current and future energy demand, availability of WWS resources, numbers of WWS devices, and area and material requirements. In Part II, we address variability, economics, and policy of WWS energy. We estimate that {approx}3,800,000 5 MW wind turbines, {approx}49,000 300 MW concentrated solar plants, {approx}40,000 300 MW solar PV power plants, {approx}1.7 billion 3 kW rooftop PV systems, {approx}5350 100 MW geothermal power plants, {approx}270 new 1300 MW hydroelectric power plants, {approx}720,000 0.75 MW wave devices, and {approx}490,000 1 MW tidal turbines can power a 2030 WWS world that uses electricity and electrolytic hydrogen for all purposes. Such a WWS infrastructure reduces world power demand by 30% and requires only {approx}0.41% and {approx}0.59% more of the world's land for footprint and spacing, respectively. We suggest producing all new energy with WWS by 2030 and replacing the pre-existing energy by 2050. Barriers to the plan are primarily social and political, not technological or economic. The energy cost in a WWS world should be similar to that today. - Research highlights: {yields} Replacing world energy with wind, water, and sun (WWS) reduces world power demand 30%. {yields} WWS for world requires only 0.41% and 0.51% more world land for footprint and spacing, respectively. {yields} Practical to provide 100% new energy with WWS by 2030 and replace existing energy by 2050.

Installation and working methods of a testing laboratory to establish a private control at the concrete plant (part 1

Directory of Open Access Journals (Sweden)

Haarmann, F.

1973-03-01

Full Text Available Not availableEl ''Control de Calidad'' puede considerarse tan importante, desde un punto de vista práctico, que unas instalaciones adecuadas para el control, tanto de la producción como de los productos acabados, representan una seguridad en la calidad de los productos y en el rendimiento de la empresa. Con la ayuda de algunos ejemplos, el presente trabajo muestra las posibilidades existentes para mantener la calidad del producto a un elevado nivel, empleando para ello instalaciones de control de calidad, aumentando, además, el rendimiento y reduciendo los costos innecesarios. En la segunda parte de este trabajo se describen ocho centros de control de calidad de grandes y pequeñas dimensiones y de acuerdo con la disposición de la figura 1. Seguidamente se hacen algunas observaciones críticas respecto a la adquisición de instalaciones para realizar un adecuado control. En un apéndice del trabajo se representan esquemáticamente unas instalaciones para el control de áridos, del hormigón fresco y del hormigón endurecido.

Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetric Flow Control-Part I: Non-Axisymmetrical Flow in Centrifugal Compressor.

Science.gov (United States)

Yang, Mingyang; Zheng, Xinqian; Zhang, Yangjun; Bamba, Takahiro; Tamaki, Hideaki; Huenteler, Joern; Li, Zhigang

2013-03-01

This is Part I of a two-part paper documenting the development of a novel asymmetric flow control method to improve the stability of a high-pressure-ratio turbocharger centrifugal compressor. Part I focuses on the nonaxisymmetrical flow in a centrifugal compressor induced by the nonaxisymmetrical geometry of the volute while Part II describes the development of an asymmetric flow control method to avoid the stall on the basis of the characteristic of nonaxisymmetrical flow. To understand the asymmetries, experimental measurements and corresponding numerical simulation were carried out. The static pressure was measured by probes at different circumferential and stream-wise positions to gain insights about the asymmetries. The experimental results show that there is an evident nonaxisymmetrical flow pattern throughout the compressor due to the asymmetric geometry of the overhung volute. The static pressure field in the diffuser is distorted at approximately 90 deg in the rotational direction of the volute tongue throughout the diffuser. The magnitude of this distortion slightly varies with the rotational speed. The magnitude of the static pressure distortion in the impeller is a function of the rotational speed. There is a significant phase shift between the static pressure distributions at the leading edge of the splitter blades and the impeller outlet. The numerical steady state simulation neglects the aforementioned unsteady effects found in the experiments and cannot predict the phase shift, however, a detailed asymmetric flow field structure is obviously obtained.

Control system and method for prosthetic devices

Science.gov (United States)

Bozeman, Richard J., Jr. (Inventor)

1992-01-01

A control system and method for prosthetic devices is provided. The control system comprises a transducer for receiving movement from a body part for generating a sensing signal associated with that movement. The sensing signal is processed by a linearizer for linearizing the sensing signal to be a linear function of the magnitude of the distance moved by the body part. The linearized sensing signal is normalized to be a function of the entire range of body part movement from the no-shrug position of the movable body part through the full-shrug position of the movable body part. The normalized signal is divided into a plurality of discrete command signals. The discrete command signals are used by typical converter devices which are in operational association with the prosthetic device. The converter device uses the discrete command signals for driving the movable portions of the prosthetic device and its sub-prosthesis. The method for controlling a prosthetic device associated with the present invention comprises the steps of receiving the movement from the body part, generating a sensing signal in association with the movement of the body part, linearizing the sensing signal to be a linear function of the magnitude of the distance moved by the body part, normalizing the linear signal to be a function of the entire range of the body part movement, dividing the normalized signal into a plurality of discrete command signals, and implementing the plurality of discrete command signals for driving the respective movable prosthesis device and its sub-prosthesis.

A Statistical Method for Aggregated Wind Power Plants to Provide Secondary Frequency Control

DEFF Research Database (Denmark)

Hu, Junjie; Ziras, Charalampos; Bindner, Henrik W.

2017-01-01

curtailment for aggregated wind power plants providing secondary frequency control (SFC) to the power system. By using historical SFC signals and wind speed data, we calculate metrics for the reserve provision error as a function of the scheduled wind power. We show that wind curtailment can be significantly......The increasing penetration of wind power brings significant challenges to power system operators due to the wind’s inherent uncertainty and variability. Traditionally, power plants and more recently demand response have been used to balance the power system. However, the use of wind power...... as a balancing-power source has also been investigated, especially for wind power dominated power systems such as Denmark. The main drawback is that wind power must be curtailed by setting a lower operating point, in order to offer upward regulation. We propose a statistical approach to reduce wind power...

Arbitrating Control of Control and Display Units

Science.gov (United States)

Sugden, Paul C.

2007-01-01

The ARINC 739 Switch is a computer program that arbitrates control of two multi-function control and display units (MCDUs) between (1) a commercial flight-management computer (FMC) and (2) NASA software used in research on transport aircraft. (MCDUs are the primary interfaces between pilots and FMCs on many commercial aircraft.) This program was recently redesigned into a software library that can be embedded in research application programs. As part of the redesign, this software was combined with software for creating custom pages of information to be displayed on a CDU. This software commands independent switching of the left (pilot s) and right (copilot s) MCDUs. For example, a custom CDU page can control the left CDU while the FMC controls the right CDU. The software uses menu keys to switch control of the CDU between the FMC or a custom CDU page. The software provides an interface that enables custom CDU pages to insert keystrokes into the FMC s CDU input interface. This feature allows the custom CDU pages to manipulate the FMC as if it were a pilot.

Internal audit: the expert in providing comfort to the audit committee. The case of risk management and internal control

OpenAIRE

G. SARENS; I. DE BEELDE

2006-01-01

This study investigates to what extent audit committees feel uncomfortable about risk management and internal control, and focuses on how internal audit can be the expert in providing comfort in these areas, building upon the sociology of professions literature. Four case studies reveal that audit committees need comfort with respect to the control environment. Thanks to their internal position, their familiarity with the company, and their position close to people across the company, interna...

Enhancing implementation of tobacco use prevention and cessation counselling guideline among dental providers: a cluster randomised controlled trial.

Science.gov (United States)

Amemori, Masamitsu; Korhonen, Tellervo; Kinnunen, Taru; Michie, Susan; Murtomaa, Heikki

2011-02-14

Tobacco use adversely affects oral health. Tobacco use prevention and cessation (TUPAC) counselling guidelines recommend that healthcare providers ask about each patient's tobacco use, assess the patient's readiness and willingness to stop, document tobacco use habits, advise the patient to stop, assist and help in quitting, and arrange monitoring of progress at follow-up appointments. Adherence to such guidelines, especially among dental providers, is poor. To improve guideline implementation, it is essential to understand factors influencing it and find effective ways to influence those factors. The aim of the present study protocol is to introduce a theory-based approach to diagnose implementation difficulties of TUPAC counselling guidelines among dental providers. Theories of behaviour change have been used to identify key theoretical domains relevant to the behaviours of healthcare providers involved in implementing clinical guidelines. These theoretical domains will inform the development of a questionnaire aimed at assessing the implementation of the TUPAC counselling guidelines among Finnish municipal dental providers. Specific items will be drawn from the guidelines and the literature on TUPAC studies. After identifying potential implementation difficulties, we will design two interventions using theories of behaviour change to link them with relevant behaviour change techniques aiming to improve guideline adherence. For assessing the implementation of TUPAC guidelines, the electronic dental record audit and self-reported questionnaires will be used. To improve guideline adherence, the theoretical-domains approach could provide a comprehensive basis for assessing implementation difficulties, as well as designing and evaluating interventions. After having identified implementation difficulties, we will design and test two interventions to enhance TUPAC guideline adherence. Using the cluster randomised controlled design, we aim to provide further evidence on

Enhancing implementation of tobacco use prevention and cessation counselling guideline among dental providers: a cluster randomised controlled trial

Directory of Open Access Journals (Sweden)

Michie Susan

2011-02-01

randomised controlled design, we aim to provide further evidence on intervention effects, as well as on the validity and feasibility of the theoretical-domain approach. The empirical data collected within this trial will be useful in testing whether this theoretical-domain approach can improve our understanding of the implementation of TUPAC guidelines among dental providers. Trial registration Current Controlled Trials ISRCTN15427433

Electronic Control Of Small Hydro-Generators Part 1

International Nuclear Information System (INIS)

Perez G, Alvaro; Romero A, Carlos E.

1993-01-01

This work is the beginning of several applied itineraries, to the government of micro-centrals, mainly directed to the control of electric variables of the generator with the desire of obtaining a system of electric generation to drop it climbs, economic, reliable and with great sense of use of the hydraulic resources guided to poor communities, isolated of the system of national interconnection. In all hydroelectric power station without caring their capacity is fundamental to govern the speed of the system turbine generator, to guarantee a constant frequency of 60 Hz, the stability of this parameter is a measure of the quality of the energy given to the user. The used regulation method is the mechanical governor, its action it is to control the flow of water that it enters to the turbine. For small generation power stations (smaller to 200 Kw), the mechanical governor's cost is comparable to the total cost of the plant, then it is economic to use an electronic load control. The project develops the load control whose function is to add external electric load to the generator to maintain the constant nominal active power and similar to the power nominal mechanics surrendered by the turbine. The microprocessor 8088 dedicated to the control of the system by the complexity of the process, the quantity of variables and the precision in the answer of the system is used. To carry out the investigation project a simulation program it was designed in computer that allows to know the answer of the load control ahead of time for different conditions of the user's operation. These results were answered with the obtained experimental values of the final tests of the team, throwing very near values to those calculated

Funnel plot control limits to identify poorly performing healthcare providers when there is uncertainty in the value of the benchmark.

Science.gov (United States)

Manktelow, Bradley N; Seaton, Sarah E; Evans, T Alun

2016-12-01

There is an increasing use of statistical methods, such as funnel plots, to identify poorly performing healthcare providers. Funnel plots comprise the construction of control limits around a benchmark and providers with outcomes falling outside the limits are investigated as potential outliers. The benchmark is usually estimated from observed data but uncertainty in this estimate is usually ignored when constructing control limits. In this paper, the use of funnel plots in the presence of uncertainty in the value of the benchmark is reviewed for outcomes from a Binomial distribution. Two methods to derive the control limits are shown: (i) prediction intervals; (ii) tolerance intervals Tolerance intervals formally include the uncertainty in the value of the benchmark while prediction intervals do not. The probability properties of 95% control limits derived using each method were investigated through hypothesised scenarios. Neither prediction intervals nor tolerance intervals produce funnel plot control limits that satisfy the nominal probability characteristics when there is uncertainty in the value of the benchmark. This is not necessarily to say that funnel plots have no role to play in healthcare, but that without the development of intervals satisfying the nominal probability characteristics they must be interpreted with care. © The Author(s) 2014.

Advanced Control Architectures for Intelligent MicroGrids, Part I

DEFF Research Database (Denmark)

Guerrero, Josep M.; Chandorkar, Mukul; Lee, Tzung-Lin

2013-01-01

This paper presents a review of advanced control techniques for microgrids. The paper covers decentralized, distributed, and hierarchical control of grid connected and islanded microgrids. At first, decentralized control techniques for microgrids are reviewed. Then, the recent developments in the...

Providers' perceptions of the implementation of a performance ...

African Journals Online (AJOL)

partly due to the lack of a system for reminding providers that patients were due to complete the ... system was feasible to implement as part of standard practice in ... Although the SAATSA is completed by the patients, in cases where they have ... platform is an important goal for this initiative; in the short term we are trying to ...

Control Systems Cyber Security Standards Support Activities

Energy Technology Data Exchange (ETDEWEB)

Robert Evans

2009-01-01

The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

Medicare Referring Provider DMEPOS PUF CY2013

Data.gov (United States)

U.S. Department of Health & Human Services — This dataset, which is part of CMSs Medicare Provider Utilization and Payment Data, details information on Durable Medical Equipment, Prosthetics, Orthotics and...

Mothers’ Part-time Employment: Associations with Mother and Family Well-being

Science.gov (United States)

Buehler, Cheryl; O’Brien, Marion

2011-01-01

The associations between mothers’ part-time employment and mother well-being, parenting, and family functioning were examined using seven waves of the NICHD Study of Early Child Care and Youth Development data (N = 1,364), infancy through middle childhood. Concurrent comparisons were made between families in which mothers were employed part time and both those in which mothers were not employed and those in which mothers were employed full time. Using multivariate analysis of covariance with extensive controls, results indicated that mothers employed part time had fewer depressive symptoms during the infancy and preschool years and better self-reported health at most time points than did nonemployed mothers. Across the time span studied, mothers working part time tended to report less conflict between work and family than those working full time. During their children’s preschool years, mothers employed part time exhibited more sensitive parenting than did other mothers, and at school age were more involved in school and provided more learning opportunities than mothers employed full time. Mothers employed part time reported doing a higher proportion of child care and housework than mothers employed full time. Part-time employment appears to have some benefits for mothers and families throughout the child-rearing years. PMID:22004432

Mothers' part-time employment: associations with mother and family well-being.

Science.gov (United States)

Buehler, Cheryl; O'Brien, Marion

2011-12-01

The associations between mothers' part-time employment and mother well-being, parenting, and family functioning were examined using seven waves of the NICHD Study of Early Child Care and Youth Development data (N = 1,364), infancy through middle childhood. Concurrent comparisons were made between families in which mothers were employed part time and both those in which mothers were not employed and those in which mothers were employed full time. Using multivariate analysis of covariance with extensive controls, results indicated that mothers employed part time had fewer depressive symptoms during the infancy and preschool years and better self-reported health at most time points than did nonemployed mothers. Across the time span studied, mothers working part time tended to report less conflict between work and family than those working full time. During their children's preschool years, mothers employed part time exhibited more sensitive parenting than did other mothers, and at school age were more involved in school and provided more learning opportunities than mothers employed full time. Mothers employed part time reported doing a higher proportion of child care and housework than mothers employed full time. Part-time employment appears to have some benefits for mothers and families throughout the child rearing years.

Design verification and fabrication of active control systems for the DAST ARW-2 high aspect ratio wing. Part 2: Appendices

Science.gov (United States)

Mcgehee, C. R.

1986-01-01

This is Part 2-Appendices of a study conducted under Drones for Aerodynamic and Structural Testing (DAST) Program to accomplish the final design and hardware fabrication for four active control systems compatible with and ready for installation in the NASA Aeroelastic Research Wing No. 2 (ARW-2) and Firebee II drone flight test vehicle. The wing structure was designed so that Active Control Systems (ACS) are required in the normal flight envelope by integrating control system design with aerodynamics and structure technologies. The DAST ARW-2 configuration uses flutter suppression, relaxed static stability, and gust and maneuver load alleviation ACS systems, and an automatic flight control system. Performance goals and criteria were applied to individual systems and the systems collectively to assure that vehicle stability margins, flutter margins, flying qualities, and load reductions were achieved.

Feedback in Clinical Education, Part I: Characteristics of Feedback Provided by Approved Clinical Instructors

Science.gov (United States)

Nottingham, Sara; Henning, Jolene

2014-01-01

Context Providing students with feedback is an important component of athletic training clinical education; however, little information is known about the feedback that Approved Clinical Instructors (ACIs; now known as preceptors) currently provide to athletic training students (ATSs). Objective To characterize the feedback provided by ACIs to ATSs during clinical education experiences. Design Qualitative study. Setting One National Collegiate Athletic Association Division I athletic training facility and 1 outpatient rehabilitation clinic that were clinical sites for 1 entry-level master's degree program accredited by the Commission on Accreditation of Athletic Training Education. Patients or Other Participants A total of 4 ACIs with various experience levels and 4 second-year ATSs. Data Collection and Analysis Extensive field observations were audio recorded, transcribed, and integrated with field notes for analysis. The constant comparative approach of open, axial, and selective coding was used to inductively analyze data and develop codes and categories. Member checking, triangulation, and peer debriefing were used to promote trustworthiness of the study. Results The ACIs gave 88 feedback statements in 45 hours and 10 minutes of observation. Characteristics of feedback categories included purpose, timing, specificity, content, form, and privacy. Conclusions Feedback that ACIs provided included several components that made each feedback exchange unique. The ACIs in our study provided feedback that is supported by the literature, suggesting that ACIs are using current recommendations for providing feedback. Feedback needs to be investigated across multiple athletic training education programs to gain more understanding of certain areas of feedback, including frequency, privacy, and form. PMID:24143902

Experiences of health care providers managing sexual assault victims in the emergency unit Part 2: Discussion of results and literature control

Directory of Open Access Journals (Sweden)

Rebecca M. Skhosana

2009-09-01

Full Text Available The objective of this study was to explore and describe the experiences of health care providers managing sexual assault victims in the emergency unit of a community hospital in the Nkangala district in the Mpumalanga Province. A qualitative, phenomenological design was applied. Purposeful sampling was used to select participants from health care providers who were working in the emergency unit and had managed more than four sexual assault victims. Data were collected by means of individual interviews and analysed according to the Tesch method of data analysis by the researcher and the independent co-coder. Main categories, subcategories and themes were identified. Participants expressed their emotions, challenges and police attitudes and behaviours, as well as inconsistencies in guidelines and needs identification. It was recommended that members of the multidisciplinary team engage in community activities and that the community participate in matters pertaining to sexual assault. Government should develop clear guidelines that are applicable to rural and urban South Africa. Health care sciences should aim to train more forensic nurses. All relevant departments should work together to alleviate the complications caused by sexual assault incidents. Opsomming Die doel van hierdie studie was om die ervaringe van gesondheidsorgverskaffers wat slagoffers van seksuele aanranding in die ongevalle-eenheid van 'n gemeenskapshospitaal in die Nkangala-distrik in die provinsie van Mpumalanga hanteer, te ontgin en te beskryf. ’n Kwalitatiewe fenomenologiese ontwerp is toegepas. Doelbewuste steekproefneming is gebruik om deelnemers te selekteer uit die groep gesondheidsorgverskaffers wat in die ongevalle-eenheid werksaam was en meer as vier slagoffers van seksuele aanranding hanteer het. Data is by wyse van individuele onderhoude ingesamel en volgens die Tesch-metode van data-analise deur die navorser en die onafhanklike medekodeerder geanaliseer

Dividing traffic cluster into parts by signal control

Science.gov (United States)

Nagatani, Takashi

2018-02-01

When a cluster of vehicles with various speeds moves through the series of signals, the cluster breaks down by stopping at signals and results in smaller groups of vehicles. We present the nonlinear-map model of the motion of vehicles controlled by the signals. We study the breakup of a cluster of vehicles through the series of signals. The cluster of vehicles is divided into various groups by controlling the cycle time of signals. The vehicles within each group move with the same mean velocity. The breakup of the traffic cluster depends highly on the signal control. The dependence of dividing on both cycle time and vehicular speed is clarified. Also, we investigate the effect of the irregular interval between signals on dividing.

Guidelines for quality assurance and quality control of fish taxonomic data collected as part of the National Water-Quality Assessment Program

Science.gov (United States)

Walsh, Stephen Joseph; Meador, Michael R.

1998-01-01

Fish community structure is characterized by the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program as part of a perennial, multidisciplinary approach to evaluating the physical, chemical, and biological conditions of the Nation's water resources. The objective of quality assurance and quality control of fish taxonomic data that are collected as part of the NAWQA Program is to establish uniform guidelines and protocols for the identification, processing, and archiving of fish specimens to ensure that accurate and reliable data are collected. Study unit biologists, collaborating with regional biologists and fish taxonomic specialists, prepare a pre-sampling study plan that includes a preliminary faunal list and identification of an ichthyological curation center for receiving preserved fish specimens. Problematic taxonomic issues and protected taxa also are identified in the study plan, and collecting permits are obtained in advance of sampling activities. Taxonomic specialists are selected to identify fish specimens in the field and to assist in determining what fish specimens should be sacrificed, fixed, and preserved for laboratory identification, independent taxonomic verification, and long-term storage in reference or voucher collections. Quantitative and qualitative sampling of fishes follows standard methods previously established for the NAWQA Program. Common ichthyological techniques are used to process samples in the field and prepare fish specimens to be returned to the laboratory or sent to an institutional repository. Taxonomic identifications are reported by using a standardized list of scientific names that provides nomenclatural consistency and uniformity across study units.

Status of the ATLAS control system upgrade

International Nuclear Information System (INIS)

Munson, F.H.; Ferraretto, M.; Rutherford, B.

1992-01-01

Certain components of the ATLAS control system are two generations behind today's technology. It has been decided to upgrade the control system. in part, by replacing Digital Equipment Corporation (DEC) PDP-11 computers with present-day VAX technology. Two primary goals have been defined for the upgraded control system. The first of these goals is to keep additional ''in-house'' written software to a minimum, while providing the portability necessary to ensure the continued use of existing software. In an attempt to achieve this goal, commercially-available software has been utilized to provide a foundation for the final control-system configuration. The second goal is to develop the new control system, while not interfering with accelerator operations. This paper describes some of the motivation for upgrading the ATLAS control system, the basic features of the new control system, and the present status of the system's development

Strengthening control over radioactive sources in authorized use and regaining control over orphan sources. National strategies

International Nuclear Information System (INIS)

2004-02-01

The objective of this report is to provide practical guidance to States on the development of a national strategy for improving control over radioactive sources, particularly dangerous sources (Categories 1-3). Part of this process involves the determination of the magnitude of the potential problem with orphan and vulnerable sources and indeed, whether or not a national strategy is needed. The ultimate objective is that States will use this report to develop and then implement a plan of action that will result in all significant sources being managed in a safe and secure manner. This report attempts to provide both the background knowledge and the methodology necessary for an individual or small team of responsible persons to develop a national strategy for improving control over all radioactive sources, but especially orphan and vulnerable sources. The background knowledge given in Chapter 3 is an update of the information on practices that was given in IAEA-TECDOC-804, which focused on spent radioactive sources. After some introductory material, this report provides both the factual information and the general steps needed to develop and implement a national strategy. Part I contains background information for those who are not already familiar with the subject including the need for national strategies, the generic causes of loss of control of sources, with specific examples and the common applications of radioactive sources. Part II details the actual process for the development and implementation of a national strategy, which includes assessing the problem by first gathering specific and national information, determining the nature and magnitude of the problem, developing the national strategy by evaluating, and prioritizing possible solutions, implementing the strategy subsequent to a high level decision; and evaluating the effectiveness of the plan and making changes as a result until the desired objective is achieved. Searches for sources will be part of

In the shadow of a new smoke free policy: A discourse analysis of health care providers' engagement in tobacco control in community mental health

Directory of Open Access Journals (Sweden)

Malchy Leslie A

2010-07-01

Full Text Available Abstract Background The prevalence of tobacco use among individuals with mental illness remains a serious public health concern. Tobacco control has received little attention in community mental health despite the fact that many individuals with mental illness are heavy smokers and experience undue tobacco-related health consequences. Methods This qualitative study used methods of discourse analysis to examine the perceptions of health care providers, both professionals and paraprofessionals, in relation to their roles in tobacco control in the community mental health system. Tobacco control is best conceptualised as a suite of policies and practices directed at supporting smoke free premises, smoking cessation counselling and limiting access to tobacco products. The study took place following the establishment of a new policy that restricted tobacco smoking inside all mental health facilities and on their grounds. Ninety one health care providers participated in open-ended interviews in which they described their role in tobacco control. The interview data were analyzed discursively by asking questions such as: what assumptions underlie what is being said about tobacco? Results Five separate yet overlapping discursive frames were identified in which providers described their roles. Managing a smoke free environment emphasised the need to police and monitor the smoke free environment. Tobacco is therapeutic was a discourse that underscored the putative value of smoking for clients. Tobacco use is an individual choice located the decision to smoke with individual clients thereby negating a role in tobacco control for providers. It's someone else's role was a discourse that placed responsibility for tobacco control with others. Finally, the discourse of tobacco control as health promotion located tobacco control in a range of activities that are used to support the health of clients. Conclusions This study provides insights into the complex

Access control and personal identification systems

CERN Document Server

Bowers, Dan M

1988-01-01

Access Control and Personal Identification Systems provides an education in the field of access control and personal identification systems, which is essential in selecting the appropriate equipment, dealing intelligently with vendors in purchases of the equipment, and integrating the equipment into a total effective system. Access control devices and systems comprise an important part of almost every security system, but are seldom the sole source of security. In order for the goals of the total system to be met, the other portions of the security system must also be well planned and executed

Evaluation of a Web-based intervention providing tailored advice for self-management of minor respiratory symptoms: exploratory randomized controlled trial.

Science.gov (United States)

Yardley, Lucy; Joseph, Judith; Michie, Susan; Weal, Mark; Wills, Gary; Little, Paul

2010-12-15

There has been relatively little research on the role of web-based support for self-care in the management of minor, acute symptoms, in contrast to the wealth of recent research into Internet interventions to support self-management of long-term conditions. This study was designed as an evaluation of the usage and effects of the "Internet Doctor" website providing tailored advice on self-management of minor respiratory symptoms (eg, cough, sore throat, fever, runny nose), in preparation for a definitive trial of clinical effectiveness. The first aim was to evaluate the effects of using the Internet Doctor webpages on patient enablement and use of health services, to test whether the tailored, theory-based advice provided by the Internet Doctor was superior to providing a static webpage providing the best existing patient information (the control condition). The second aim was to gain an understanding of the processes that might mediate any change in intentions to consult the doctor, by comparing changes in relevant beliefs and illness perceptions in the intervention and control groups, and by analyzing usage of the Internet Doctor webpages and predictors of intention change. Participants (N = 714) completed baseline measures of beliefs about their symptoms and self-care online, and were then automatically randomized to the Internet Doctor or control group. These measures were completed again by 332 participants after 48 hours. Four weeks later, 214 participants completed measures of enablement and health service use. The Internet Doctor resulted in higher levels of satisfaction than the control information (mean 6.58 and 5.86, respectively; P = .002) and resulted in higher levels of enablement a month later (median 3 and 2, respectively; P = .03). Understanding of illness improved in the 48 hours following use of the Internet Doctor webpages, whereas it did not improve in the control group (mean change from baseline 0.21 and -0.06, respectively, P = .05). Decline

Parts Quality Management: Direct Part Marking via Data Matrix Symbols for Mission Assurance

Science.gov (United States)

Moss, Chantrice

2013-01-01

A United States Government Accountability Office (GAO) review of twelve NASA programs found widespread parts quality problems contributing to significant cost overruns, schedule delays, and reduced system reliability. Direct part-marking with Data Matrix symbols could significantly improve the quality of inventory control and parts lifecycle management. This paper examines the feasibility of using 15 marking technologies for use in future NASA programs. A structural analysis is based on marked material type, operational environment (e.g., ground, suborbital, orbital), durability of marks, ease of operation, reliability, and affordability. A cost-benefits analysis considers marking technology (data plates, label printing, direct part marking) and marking types (two-dimensional machine-readable, human-readable). Previous NASA parts marking efforts and historical cost data are accounted for, including in-house vs. outsourced marking. Some marking methods are still under development. While this paper focuses on NASA programs, results may be applicable to a variety of industrial environments.

NF EN ISO 11137-1, July 2006. Sterilization of health care products - Irradiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices; NF EN ISO 11137-1, Juillet 2006. Sterilisation des produits de sante - Irradiation - Partie 1: exigences relatives a la mise au point, a la validation et au controle de routine d'un procede de sterilisation pour les dispositifs medicaux

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

This part of the ISO 11137 standard specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of this part of the ISO 11137 standard is limited to medical devices, it specifies requirements and provides guidance that may be applicable to other products and equipment. This part of the international standard covers radiation processes employing irradiators using the radionuclide {sup 60}Co or {sup 137}Cs, a beam from an electron generator or a beam from an X-ray generator. This part of the international standard does not: - specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease; - detail specified requirements for designating a medical device as sterile; - specify a quality management system for the control of all stages of production of medical devices; - specify requirements for occupational safety associated with the design and operation of irradiation facilities; - specify requirements for the sterilization of used or reprocessed devices.

Defining hip fracture with claims data: outpatient and provider claims matter.

Science.gov (United States)

Berry, S D; Zullo, A R; McConeghy, K; Lee, Y; Daiello, L; Kiel, D P

2017-07-01

Medicare claims are commonly used to identify hip fractures, but there is no universally accepted definition. We found that a definition using inpatient claims identified fewer fractures than a definition including outpatient and provider claims. Few additional fractures were identified by including inconsistent diagnostic and procedural codes at contiguous sites. Medicare claims data is commonly used in research studies to identify hip fractures, but there is no universally accepted definition of fracture. Our purpose was to describe potential misclassification when hip fractures are defined using Medicare Part A (inpatient) claims without considering Part B (outpatient and provider) claims and when inconsistent diagnostic and procedural codes occur at contiguous fracture sites (e.g., femoral shaft or pelvic). Participants included all long-stay nursing home residents enrolled in Medicare Parts A and B fee-for-service between 1/1/2008 and 12/31/2009 with follow-up through 12/31/2011. We compared the number of hip fractures identified using only Part A claims to (1) Part A plus Part B claims and (2) Part A and Part B claims plus discordant codes at contiguous fracture sites. Among 1,257,279 long-stay residents, 40,932 (3.2%) met the definition of hip fracture using Part A claims, and 41,687 residents (3.3%) met the definition using Part B claims. 4566 hip fractures identified using Part B claims would not have been captured using Part A claims. An additional 227 hip fractures were identified after considering contiguous fracture sites. When ascertaining hip fractures, a definition using outpatient and provider claims identified 11% more fractures than a definition with only inpatient claims. Future studies should publish their definition of fracture and specify if diagnostic codes from contiguous fracture sites were used.

Indices system design of distribution logistics, transport logistics and materials flow as parts of controlling in enterprise´s logistics

Directory of Open Access Journals (Sweden)

Andrea Rosová

2010-02-01

Full Text Available There is necessary to think about two aspects while applying controlling in logistics. The main aim of the logistics in relationto business economics is assessing support to the invested financial capital resources – it is the first aspect. The second one is basedon the target of controlling – continuous monitoring of company’s economy. In order to make a logistics controlling successful and withrequired results it is necessary to utilize any logistics controlling tools. One of the tools in logistics controlling is a set of indicators.Important part of controlling logistics system is monitoring and evaluation of logistics markers. Logistic markers representsynthetic view to logistic performance and logistic costs by the means of interaction rate so that it can evaluate logistic activities area,cost economy and final productivity of logistics activities in company.This contribution deals with markers system proposal of distribution logistics, transport logistics and materials flow control.System of markers is designed with regard to basic facilities and specifications, who has to copy character and disposition rememberedsubsystems enterprise’s logistics system.

Standard biological parts knowledgebase.

Directory of Open Access Journals (Sweden)

Michal Galdzicki

2011-02-01

Full Text Available We have created the Knowledgebase of Standard Biological Parts (SBPkb as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org. The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org. SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL, a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

Standard Biological Parts Knowledgebase

Science.gov (United States)

Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M.; Gennari, John H.

2011-01-01

We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate “promoter” parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible. PMID:21390321

Standard biological parts knowledgebase.

Science.gov (United States)

Galdzicki, Michal; Rodriguez, Cesar; Chandran, Deepak; Sauro, Herbert M; Gennari, John H

2011-02-24

We have created the Knowledgebase of Standard Biological Parts (SBPkb) as a publically accessible Semantic Web resource for synthetic biology (sbolstandard.org). The SBPkb allows researchers to query and retrieve standard biological parts for research and use in synthetic biology. Its initial version includes all of the information about parts stored in the Registry of Standard Biological Parts (partsregistry.org). SBPkb transforms this information so that it is computable, using our semantic framework for synthetic biology parts. This framework, known as SBOL-semantic, was built as part of the Synthetic Biology Open Language (SBOL), a project of the Synthetic Biology Data Exchange Group. SBOL-semantic represents commonly used synthetic biology entities, and its purpose is to improve the distribution and exchange of descriptions of biological parts. In this paper, we describe the data, our methods for transformation to SBPkb, and finally, we demonstrate the value of our knowledgebase with a set of sample queries. We use RDF technology and SPARQL queries to retrieve candidate "promoter" parts that are known to be both negatively and positively regulated. This method provides new web based data access to perform searches for parts that are not currently possible.

Loose part monitoring device

International Nuclear Information System (INIS)

Nomura, Hiroshi.

1992-01-01

The device of the present invention estimates a place where loose parts occur and structural components as the loose parts in a fluid flow channel of a reactor device, to provide information thereof to a plant operator. That is, the device of the present invention comprises (1) a plurality of detectors disposed to each of equipments constituting fluid channels, (2) an abnormal sound sensing device for sensing signals from the detectors, (3) an estimation section for estimating the place where the loose parts occur and the structural components thereof based on the signals sensed by the abnormal sound sensing section, (4) a memory section for storing data of the plant structure necessary for the estimation, and (5) a display section for displaying the result of the estimation. In such a device, the position where the loose parts collide against the plant structural component and the energy thereof are estimated. The dropping path of the loose parts is estimated from the estimation position. Parts to be loose parts in the path are listed up. The parts on the list is selected based on the estimated energy thereby enabling to determine the loose parts. (I.S.)

Modernization of turbine control system and reactor control system in Almaraz 1 and 2

International Nuclear Information System (INIS)

Pulido, C.; Diez, J.; Carrasco, J. A.; Lopez, L.

2005-01-01

The replacement of the Turbine Control System and Reactor Control System are part of the Almaraz modernization program for the Instrumentation and Control. For these upgrades Almaraz has selected the Ovation Platform that provides open architecture and easy expansion to other systems, these platforms is highly used in many nuclear and thermal plants around the world. One of the main objective for this project were to minimize the impact on the installation and operation of the plant, for that reason the project is implemented in two phases, Turbine Control upgrade and Reactor Control upgrade. Another important objective was to increase the reliability of the control system making them fully fault tolerant to single failures. The turbine Control System has been installed in Units 1 and 2 while the Reactor Control System will be installed in 2006 and 2007 outages. (Author)

Hierarchical tree-structured control network for the Antares laser facility

Energy Technology Data Exchange (ETDEWEB)

McGirt, F.

1979-01-01

The design and implementation of a distributed, computer-based control system for the Antares 100-kJ gas laser fusion facility is presented. Control system requirements and their operational interrelationships that consider both integrated system control and individual subsystem control are described. Several configurations of minicomputers are established to provide direct control of sets of microcomputers and to provide points of operator-laser interaction. Over 100 microcomputers are located very close to the laser device control points or sources of data and perform the real-time functions of the control system, such as data and control signal multiplexing, stepping motor control, and vacuum and gas system control. These microcomputers are designed to be supported as an integral part of the control network and to be software compatible with the larger minicomputers.

Hierarchical tree-structured control network for the Antares laser facility

International Nuclear Information System (INIS)

McGirt, F.

1979-01-01

The design and implementation of a distributed, computer-based control system for the Antares 100-kJ gas laser fusion facility is presented. Control system requirements and their operational interrelationships that consider both integrated system control and individual subsystem control are described. Several configurations of minicomputers are established to provide direct control of sets of microcomputers and to provide points of operator-laser interaction. Over 100 microcomputers are located very close to the laser device control points or sources of data and perform the real-time functions of the control system, such as data and control signal multiplexing, stepping motor control, and vacuum and gas system control. These microcomputers are designed to be supported as an integral part of the control network and to be software compatible with the larger minicomputers

Randomized, Controlled Trial of CBT Training for PTSD Providers

Science.gov (United States)

2016-10-29

clinician applicants occurred. b. SP baseline interviews with eligible clinicians occurred. c. Automated random assignment of participants with Completed SP...intervention without web-centered supervision and a wait-list control with regard to improvements in two CBT-based skill areas (behavioral task...Secondary Aim #1: To compare improvements in knowledge and attitudes following internet- based training with or without web-centered supervision and

Digital control in LLRF system for CYCIAE-100 cyclotron

Energy Technology Data Exchange (ETDEWEB)

Yin, Zhiguo, E-mail: bitbearAT@hotmail.com; Fu, Xiaoliang; Ji, Bin; Zhang, Tianjue; Wang, Chuan

2016-05-21

As a driven accelerator, the CYCIAE-100 cyclotron is designed by China Institute of Atomic Energy for the Beijing Radio Ion-beam Facility project. The cyclotron RF system is designed to use two RF power sources of 100 kW to drive two half-wavelength cavities respectively. Two Dee accelerating electrodes are kept separately from each other inside the cyclotron, while their accelerating voltages are maintained in phase by the efforts of LLRF control. An analog–digital hybrid LLRF system has been developed to achieve cavity tuning control, dee voltage amplitude and phase stabilization etc. The analog subsystems designs are focused on RF signal up/down conversion, tuning control, and dee voltage regulation. The digital system provides an RF signal source, aligns the cavity phases and maintains a Finite State Machine. The digital parts combine with the analog functions to provide the LLRF control. A brief system hardware introduction will be given in this paper, followed by the review of several major characteristics of the digital control in the 100 MeV cyclotron LLRF system. The commissioning is also introduced, and most of the optimization during the process was done by changing the digital parts.

Control and optimal control theories with applications

CERN Document Server

Burghes, D N

2004-01-01

This sound introduction to classical and modern control theory concentrates on fundamental concepts. Employing the minimum of mathematical elaboration, it investigates the many applications of control theory to varied and important present-day problems, e.g. economic growth, resource depletion, disease epidemics, exploited population, and rocket trajectories. An original feature is the amount of space devoted to the important and fascinating subject of optimal control. The work is divided into two parts. Part one deals with the control of linear time-continuous systems, using both transfer fun

Non-Model-Based Control of a Wheeled Vehicle Pulling Two Trailers to Provide Early Powered Mobility and Driving Experiences.

Science.gov (United States)

Sanders Td Vr, David A

2018-01-01

Non-model-based control of a wheeled vehicle pulling two trailers is proposed. It is a fun train for disabled children consisting of a locomotive and two carriages. The fun train has afforded opportunities for both disabled and able bodied young people to share an activity and has provided early driving experiences for disabled children; it has introduced them to assistive and powered mobility. The train is a nonlinear system and subject to nonholonomic kinematic constraints, so that position and state depend on the path taken to get there. The train is described, and then, a robust control algorithm using proportional-derivative filtered errors is proposed to control the locomotive. The controller was not dependent on an accurate model of the train, because the mass of the vehicle and two carriages changed depending on the number, size, and shape of children and wheelchair seats on the train. The controller was robust and stable in uncertainty. Results are presented to show the effectiveness of the approach, and the suggested control algorithm is shown to be acceptable without knowing the exact plant dynamics.

High-performance control system for a heavy-ion medical accelerator

Energy Technology Data Exchange (ETDEWEB)

Lancaster, H.D.; Magyary, S.B.; Sah, R.C.

1983-03-01

A high performance control system is being designed as part of a heavy ion medical accelerator. The accelerator will be a synchrotron dedicated to clinical and other biomedical uses of heavy ions, and it will deliver fully stripped ions at energies up to 800 MeV/nucleon. A key element in the design of an accelerator which will operate in a hospital environment is to provide a high performance control system. This control system will provide accelerator modeling to facilitate changes in operating mode, provide automatic beam tuning to simplify accelerator operations, and provide diagnostics to enhance reliability. The control system being designed utilizes many microcomputers operating in parallel to collect and transmit data; complex numerical computations are performed by a powerful minicomputer. In order to provide the maximum operational flexibility, the Medical Accelerator control system will be capable of dealing with pulse-to-pulse changes in beam energy and ion species.

High-performance control system for a heavy-ion medical accelerator

International Nuclear Information System (INIS)

Lancaster, H.D.; Magyary, S.B.; Sah, R.C.

1983-03-01

A high performance control system is being designed as part of a heavy ion medical accelerator. The accelerator will be a synchrotron dedicated to clinical and other biomedical uses of heavy ions, and it will deliver fully stripped ions at energies up to 800 MeV/nucleon. A key element in the design of an accelerator which will operate in a hospital environment is to provide a high performance control system. This control system will provide accelerator modeling to facilitate changes in operating mode, provide automatic beam tuning to simplify accelerator operations, and provide diagnostics to enhance reliability. The control system being designed utilizes many microcomputers operating in parallel to collect and transmit data; complex numerical computations are performed by a powerful minicomputer. In order to provide the maximum operational flexibility, the Medical Accelerator control system will be capable of dealing with pulse-to-pulse changes in beam energy and ion species

Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

International Nuclear Information System (INIS)

1995-01-01

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system

Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-14

The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system.

Understanding quantitative research: part 1.

Science.gov (United States)

Hoe, Juanita; Hoare, Zoë

This article, which is the first in a two-part series, provides an introduction to understanding quantitative research, basic statistics and terminology used in research articles. Critical appraisal of research articles is essential to ensure that nurses remain up to date with evidence-based practice to provide consistent and high-quality nursing care. This article focuses on developing critical appraisal skills and understanding the use and implications of different quantitative approaches to research. Part two of this article will focus on explaining common statistical terms and the presentation of statistical data in quantitative research.

Fault Tolerant Feedback Control

DEFF Research Database (Denmark)

Stoustrup, Jakob; Niemann, H.

2001-01-01

An architecture for fault tolerant feedback controllers based on the Youla parameterization is suggested. It is shown that the Youla parameterization will give a residual vector directly in connection with the fault diagnosis part of the fault tolerant feedback controller. It turns out...... that there is a separation be-tween the feedback controller and the fault tolerant part. The closed loop feedback properties are handled by the nominal feedback controller and the fault tolerant part is handled by the design of the Youla parameter. The design of the fault tolerant part will not affect the design...... of the nominal feedback con-troller....

78 FR 4038 - Critical Parts for Airplane Propellers

Science.gov (United States)

2013-01-18

... manufacturers are not required to provide information concerning propeller critical part design, manufacture, or... engineering, manufacturing, and service management processes should provide clear information for propeller... manufacture critical parts for airplane propellers update their manuals to record engineering, manufacture...

Stability Improvement of High-Pressure-Ratio Turbocharger Centrifugal Compressor by Asymmetrical Flow Control-Part II: Nonaxisymmetrical Self-Recirculation Casing Treatment.

Science.gov (United States)

Zheng, Xinqian; Zhang, Yangjun; Yang, Mingyang; Bamba, Takahiro; Tamaki, Hideaki

2013-03-01

This is part II of a two-part paper involving the development of an asymmetrical flow control method to widen the operating range of a turbocharger centrifugal compressor with high-pressure ratio. A nonaxisymmetrical self-recirculation casing treatment (SRCT) as an instance of asymmetrical flow control method is presented. Experimental and numerical methods were used to investigate the impact of nonaxisymmetrical SRCT on the surge point of the centrifugal compressor. First, the influence of the geometry of a symmetric SRCT on the compressor performance was studied by means of numerical simulation. The key parameter of the SRCT was found to be the distance from the main blade leading edge to the rear groove (S r ). Next, several arrangements of a nonaxisymmetrical SRCT were designed, based on flow analysis presented in part I. Then, a series of experiments were carried out to analyze the influence of nonaxisymmetrical SRCT on the compressor performance. Results show that the nonaxisymmetrical SRCT has a certain influence on the performance and has a larger potential for stability improvement than the traditional symmetric SRCT. For the investigated SRCT, the surge flow rate of the compressor with the nonaxisymmetrical SRCTs is about 10% lower than that of the compressor with symmetric SRCT. The largest surge margin (smallest surge flow rate) can be obtained when the phase of the largest S r is coincident with the phase of the minimum static pressure in the vicinity of the leading edge of the splitter blades.

14 CFR Appendix D to Part 25 - Appendix D to Part 25

Science.gov (United States)

2010-01-01

... AIRWORTHINESS STANDARDS: TRANSPORT CATEGORY AIRPLANES Pt. 25, App. D Appendix D to Part 25 Criteria for... any compartment. (7) The degree of automation provided in the aircraft systems to afford (after...

Preliminary study on the control of direct injection diesel engine for better fuel flexibility and emissions control. Pt. 1 and 2

Energy Technology Data Exchange (ETDEWEB)

Egnell, R.; Kassem, N.; Bohlin, T.

1985-01-01

This report summarizes the results of a preliminary study on turbocharged direct injection diesel engines. Part I reviews the qualitative dynamic aspects of turbocharged diesel engine and the factors that affect its transient behaviour. It gives a brief account of the model structure and the interrelationships between the different components of the model as well as the different types of engine models and the methods of simulation. The transient response of a turbocharged engine under changing load, speed, and ambient conditions are discussed. Methods to improve the transient response, thus reducing fuel consumption and smoke emissions are briefly reviewed. Finally, both conventional and advanced control strategies are discussed with emphasis on the control of fuel injection (Delta-control), injection time (Alfa-control), and exhaust gas recirculation (EGR-control). Part II (in Swedish) consists of a literature survey on hardware components such as sensors, actuators, and injection systems that are, or expect to be, available with reasonable commercial costs. The objective of this survey is to provide the grounds on which to decide if these components satisfy the requirements of electronic control systems. Part III (in Swedish) discusses the transient response measurements obtained from two sets of experiments conducted on a six-cylinder motor working under varying conditions of load and speed. The objective of the first set of experiments was to quantify the difference in ignition delay between the transient and steady state operating conditions. The second set of experiments were aimed to provide a basis on which the engine efficiency obtained under transient conditions can be compared to that obtained from a single-cylinder motor working under steady state conditions.

The influence of flower morphology and nectar quality on the longevity of a parasitoid biological control agent

NARCIS (Netherlands)

Vattala, H.D.; Wratten, S.D.; Phillips, C.B.; Wäckers, F.L.

2006-01-01

Conservation biological control aims to enhance the efficacy of arthropod biological control agents, such as parasitoids, partly by providing them with access to floral nectar. However, the suitability of a flower species for providing nectar to a parasitoid is dependent on the morphologies of the

Effective communication with primary care providers.

Science.gov (United States)

Smith, Karen

2014-08-01

Effective communication requires direct interaction between the hospitalist and the primary care provider using a standardized method of information exchange with the opportunity to ask questions and assign accountability for follow-up roles. The discharge summary is part of the process but does not provide the important aspects of handoff, such as closed loop communication and role assignments. Hospital discharge is a significant safety risk for patients, with more than half of discharged patients experiencing at least one error. Hospitalist and primary care providers need to collaborate to develop a standardized system to communicate about shared patients that meets handoff requirements. Copyright © 2014 Elsevier Inc. All rights reserved.

Fuel cycle facility control system for the Integral Fast Reactor Program

International Nuclear Information System (INIS)

Benedict, R.W.; Tate, D.A.

1993-01-01

As part of the Integral Fast Reactor (IFR) Fuel Demonstration, a new distributed control system designed, implemented and installed. The Fuel processes are a combination of chemical and machining processes operated remotely. To meet this special requirement, the new control system provides complete sequential logic control motion and positioning control and continuous PID loop control. Also, a centralized computer system provides near-real time nuclear material tracking, product quality control data archiving and a centralized reporting function. The control system was configured to use programmable logic controllers, small logic controllers, personal computers with touch screens, engineering work stations and interconnecting networks. By following a structured software development method the operator interface was standardized. The system has been installed and is presently being tested for operations

33 CFR Appendix E to Part 157 - Specifications for the Design, Installation and Operation of a Part Flow System for Control of...

Science.gov (United States)

2010-07-01

... established by the Administration and which shall at least contain all the provisions of these Specifications. 2.2The part flow concept is based on the principle that the observation of a representative part... arrangements acceptable to the Administration. 3.3The display of the part flow shall be arranged in a sheltered...

The Global View on Port State Control

NARCIS (Netherlands)

S. Knapp (Sabine); Ph.H.B.F. Franses (Philip Hans)

2006-01-01

textabstractThis report is the second part of a PhD project entitled "The Econometrics of Maritime Safety – Recommendations to Enhance Safety at Sea" which is based on 183,000 port state control inspections and 11,700 casualties from various data sources. Its overall objective is to provide

Foot shape and its effect on functioning in Royal Australian Air Force recruits. Part 2: Pilot, randomized, controlled trial of orthotics in recruits with flat feet.

Science.gov (United States)

Esterman, Adrian; Pilotto, Louis

2005-07-01

As part of a larger study of the effect of foot shape on functioning, 47 Royal Australian Air Force recruits with flexible flat feet who were embarking on a 10-week basic training course took part in a randomized controlled trial of orthotic therapy. In particular, recruits were assigned at random to an untreated group or a group that received Australian Orthotics Laboratory, three-quarter-length, flexible, shoe inserts. The groups were assessed at baseline and week 8. Outcome measures included pain, injury, foot health, and quality of life. The untreated group (n = 22) had a greater proportion of heavier recruits than did the treated group (n = 25). There were no significant differences in outcome measures at baseline. Only one-half of the group assigned to orthotic therapy wore the orthotics most or all of the time. At the end of the trial, although the results were not statistically significant, those who were provided with orthotics and wore them had the least lower limb pain and the best general foot health and quality of life. Notably, none of the recruits who wore their orthotics most or all of the time sustained a training injury.

Infection control and quality assurance of health services provided in ICU: development of an ICU website.

Science.gov (United States)

Diomidous, Marianna; Ponirou, Paraskevi; Mpizopoulou, Zoi; Tzalera, Vaia; Mechili, Aggelos

2013-01-01

The aim of this study is to examine the infections control methods in ICU as well as the issue of quality in health services provided, as they constitute an important quality assurance indicator. Moreover, nowadays the causes of Nosocomial infections are known and so do the measures for their control. There is a need however for an information resource that will promote specialized and general guidelines. The measures include the appropriate use of gloves, cleaning and disinfection of the ICU environment and hand washing which is the most important of all. Therefore an effort was made to develop an easy to navigate webpage with practical and comprehensible clinical guidelines. Additionally, it gives to all visitors the opportunity for further information research with the use of the included links. For the development of the web side existing clinical guide lines were scrutinizes as well as studies that concern the effectiveness of the measures mentioned and for the identification of quality assurance criteria.

DYNAMICS BASED CONTROL OF A SKID STEERING MOBILE ROBOT

Directory of Open Access Journals (Sweden)

Osama Elshazly

2016-06-01

Full Text Available In this paper, development of a reduced order, augmented dynamics-drive model that combines both the dynamics and drive subsystems of the skid steering mobile robot (SSMR is presented. A Linear Quadratic Regulator (LQR control algorithm with feed-forward compensation of the disturbances part included in the reduced order augmented dynamics-drive model is designed. The proposed controller has many advantages such as its simplicity in terms of design and implementation in comparison with complex nonlinear control schemes that are usually designed for this system. Moreover, the good performance is also provided by the controller for the SSMR comparable with a nonlinear controller based on the inverse dynamics which depends on the availability of an accurate model describing the system. Simulation results illustrate the effectiveness and enhancement provided by the proposed controller.

System-oriented inventory models for spare parts

NARCIS (Netherlands)

Basten, R.J.I.; Houtum, van G.J.J.A.N.

2014-01-01

Stocks of spare parts, located at appropriate locations, can prevent long downtimes of technical systems that are used in the primary processes of their users. Since such downtimes are typically very expensive, generally system-oriented service measures are used in spare parts inventory control.

UNICOS CPC6: Automated Code Generation for Process Control Applications

CERN Document Server

Fernandez Adiego, B; Prieto Barreiro, I

2011-01-01

The Continuous Process Control package (CPC) is one of the components of the CERN Unified Industrial Control System framework (UNICOS) [1]. As a part of this framework, UNICOS-CPC provides a well defined library of device types, amethodology and a set of tools to design and implement industrial control applications. The new CPC version uses the software factory UNICOS Application Builder (UAB) [2] to develop CPC applications. The CPC component is composed of several platform oriented plugins PLCs and SCADA) describing the structure and the format of the generated code. It uses a resource package where both, the library of device types and the generated file syntax, are defined. The UAB core is the generic part of this software, it discovers and calls dynamically the different plug-ins and provides the required common services. In this paper the UNICOS CPC6 package is introduced. It is composed of several plug-ins: the Instance generator and the Logic generator for both, Siemens and Schneider PLCs, the SCADA g...

Remote controlled transport device

International Nuclear Information System (INIS)

Nakahira, Masataka; Oka, Kiyoshi; Ito, Akira; Tada, Eisuke; Sato, Masaki

1998-01-01

The present invention provides a device for transporting equipments for maintenance and parts between a maintenance port and a facility for maintenance by remote control in a radioactive material handling facility such as a nuclear power plant. Namely, a power supply bus bar is disposed along a transferring path in order to supply power to a transporting means, and is divided into every region having a predetermined length. Each of the power supply bus bar regions is controlled for the power supply by a control device. Accordingly, the transporting means can be moved and driven successively being independent on every power supply bus bar region. Accordingly, a plurality of transporting means can be operated independently in a transferring path without laying around power cables and control signal cables. (I.S.)

Social capital and burnout among mental healthcare providers.

Science.gov (United States)

Eliacin, Johanne; Flanagan, Mindy; Monroe-DeVita, Maria; Wasmuth, Sarah; Salyers, Michelle P; Rollins, Angela L

2018-01-06

Provider burnout is a critical problem in mental health services. Contributing factors have been explicated across three domains: personal, job and organizational characteristics. Of these, organizational characteristics, including workplace environment, appear to be particularly important given that most interventions addressing burnout via the other domains (e.g. bolstering personal coping skills) have been modestly effective at best. This study builds on previous research by using social capital as a framework for the experience of work social milieu, and aims to provide a richer understanding of how workplace social environment might impact burnout and help create more effective ways to reduce burnout. Providers (n = 40) taking part in a larger burnout intervention study were randomly selected to take part in interviews regarding their workplace environment and burnout. Participant responses were analyzed thematically. Workplace social milieu revolved around two primary themes: workplace social capital in provider burnout and the protective qualities of social capital in cohesive work teams that appear to mitigate burnout. These results imply that work environments where managers support collaboration and social interaction among work teams may reduce burnout.

Strategic provisioning of replacement parts for CANDU power plants

International Nuclear Information System (INIS)

Mizuno, G.; Tume, P.; Prentice, J.

2000-01-01

Provisioning of replacement parts and management of critical spares are key factors in optimizing maintenance programs for CANDU power plants. With a view to supply assurance, Atomic Energy Canada Limited (AECL) has created a Spare Parts Branch (SPB) to provide a clear pipeline from the client to the delivered replacement part(s). SPB provides the client with assured access to a qualified supplier database, computer aided design, engineering and manufacturing services and material upgrades and design registration through the authorized inspection agency. The AECL spare parts strategic provisioning service plan that has four thrusts: 1) the efficient delivery of cost-effective replacement parts; 2) obsolete parts resolution; 3) a website that will provide our clients with real-time access to replacement part data; and 4) inventory recovery opportunities. Thrusts one and two are actively ensuring plant maintenance for on-shore and off-shore CANDU clients. Thrusts three and four are longer-term commitments. This paper will explore these thrusts in the context of our CANDU business practices. (author)

Application of fuzzy logic in nuclear reactor control Part I: An assessment of state-of-the-art

International Nuclear Information System (INIS)

Herger, A.S.; Jamshidl, M.; Alang-Rashid, N.K.

1995-01-01

This article discusses the application of fuzzy logic to nuclear reactor control. The method has been suggested by many investigators in many control applications. Reviews of the application of fuzzy logic in process control are given by Tong and Sugeno. Because fuzzy logic control (FLC) provides a pathway for transforming human abstractions into the numerical domain, it has the potential to assist nuclear reactor operators in the control room. With this transformation, linguistically expressed control principles can be coded into the fuzzy controller rule base. Having acquired the skill of the operators, the FLC can assist an operator in controlling the complex system. The thrust of FLC is to derive a conceptual model of the control operation, without expressing the process as mathematical equations, to assist the human operator in interpreting incoming plant variables and arriving at a proper control action. To introduce the concept of FLC in nuclear reactor operation, an overview of the mythology and a review of its application in both nuclear and nonnuclear control application domains are presented along with subsequent discussion of fuzzy logic controllers, their structures, and their method of information processing. The article concludes with the application of a tunable FLC to a typical reactor control problem

Application of fuzzy logic in nuclear reactor control: Part 1: An assessment of state-of-the-art

International Nuclear Information System (INIS)

Heger, A.S.; Alang-Rashid, N.K.; Jamshidi, M.

1995-01-01

This article discusses the application of fuzzy logic of nuclear reactor control. The method has been suggested by many investigators in many control applications. Reviews of the application of fuzzy logic in process control are given by Tong and Sugeno. Because fuzzy logic control (FLC) provides a pathway for transforming human abstractions into the numerical domain, it has the potential to assist nuclear reactor operators in the control room. With this transformation, linguistically expressed control principles can be coded into the fuzzy controller rule base. Having acquired the skill of he operators, the FLC can assist an operator in controlling the complex system. The thrust of FLC is to derive a conceptual model of the control operation, without expressing the process as mathematical equations, to assist the human operator in interpreting incoming plant variables and arriving at a proper control action. To introduce the concept of FLC in nuclear reactor operation, an overview of the mythology and a review of its application in both nuclear and nonnuclear control application domains are presented along with subsequent discussion of fuzzy logic controllers, their structures, and their method of information processing. The article concludes with the application of a tunable FLC to a typical reactor control problem. 49 refs., 9 figs., 3 tabs

Passivity-based control and estimation in networked robotics

CERN Document Server

Hatanaka, Takeshi; Fujita, Masayuki; Spong, Mark W

2015-01-01

Highlighting the control of networked robotic systems, this book synthesizes a unified passivity-based approach to an emerging cross-disciplinary subject. Thanks to this unified approach, readers can access various state-of-the-art research fields by studying only the background foundations associated with passivity. In addition to the theoretical results and techniques,  the authors provide experimental case studies on testbeds of robotic systems  including networked haptic devices, visual robotic systems,  robotic network systems and visual sensor network systems. The text begins with an introduction to passivity and passivity-based control together with the other foundations needed in this book. The main body of the book consists of three parts. The first examines how passivity can be utilized for bilateral teleoperation and demonstrates the inherent robustness of the passivity-based controller against communication delays. The second part emphasizes passivity’s usefulness for visual feedback control ...

41 CFR Appendix A to Part 60 - 741-Guidelines on a Contractor's Duty To Provide Reasonable Accommodation

Science.gov (United States)

2010-07-01

... disability. Job restructuring may also involve allowing part-time or modified work schedules. For instance, flexible or adjusted work schedules could benefit persons who cannot work a standard schedule because of... having significant difficulty performing his or her job. 1. A contractor is required to make reasonable...

40 CFR Appendix B to Part 76 - Procedures and Methods for Estimating Costs of Nitrogen Oxides Controls Applied to Group 1, Boilers

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Procedures and Methods for Estimating Costs of Nitrogen Oxides Controls Applied to Group 1, Boilers B Appendix B to Part 76 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) ACID RAIN NITROGEN OXIDES...

Non destructive testing of green parts in powder metallurgy

International Nuclear Information System (INIS)

Accary, A.

1979-01-01

The non destructive testing of green parts is potentially advantageous by making possible a lowering of the material and energy consumption as well as the production of parts with a 100% reliability. After a survey of the possible methods and of the defects to be detected it is shown that the goal can be achieved using a 'blind detection' method and that the difficulty of the problem depends on the size and shape of the part to be controled. The gravimetric, dimensional, γ absorption and thermal diffusivity methods are then examined. It is concluded that a unit control is paying only if it allows to enter the high reliability part market. Used statisticaly the non destructive testing of green parts can possibly lead to savings on materials and energy [fr

Quality Control of Laser-Beam-Melted Parts by a Correlation Between Their Mechanical Properties and a Three-Dimensional Surface Analysis

Science.gov (United States)

Grimm, T.; Wiora, G.; Witt, G.

2017-03-01

Good correlations between three-dimensional surface analyses of laser-beam-melted parts of nickel alloy HX and their mechanical properties were found. The surface analyses were performed with a confocal microscope, which offers a more profound surface data basis than a conventional, two-dimensional tactile profilometry. This new approach results in a wide range of three-dimensional surface parameters, which were each evaluated with respect to their feasibility for quality control in additive manufacturing. As a result of an automated surface analysis process by the confocal microscope and an industrial six-axis robot, the results are an innovative approach for quality control in additive manufacturing.

Experiencing control

NARCIS (Netherlands)

Monaci, G.; Braspenning, R.A.C.; Meerbeek, B.W.; Bingley, P.; Rajagopalan, R.; Triki, M.

2009-01-01

This report describes the activities carried out in the first part of the Experiencing Control project (2008-324). The guiding idea of the project is to make control part of the experience, exploring new interaction solutions for complex, engaging interactions with Philips devices in the living

Controlled cooling of an electronic system based on projected conditions

Science.gov (United States)

David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

2015-08-18

Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

Provider-based Medicare risk contracting and subcontracting: opportunities and risks for provider sponsored organizations.

Science.gov (United States)

Levin, H A; Zenner, P A; Kipp, R A; Whitney, E L

1997-01-01

Provider sponsored organizations (PSOs) are increasingly acquiring the risk for the management of Medicare Risk patients by accepting capitation directly from the Health Care Financing Administration (HCFA) or through contracts with HMOs or other organizations contracting with HCFA. The Medicare population and the requirements that the federal administration has put into place with respect to risk contracting are unique and demand specific responses on the part of the PSO for a contract to be successful. The PSO is cautioned to understand the actuarial risk, the clinical uniqueness of the Medicare beneficiary, Medicare reimbursement regulatory requirements, utilization management needs, and necessary reporting before entering into a contractual arrangement. This article attempts to describe some of the more common issues a provider organization must consider.

PREREM: an interactive data preprocessing code for INREM II. Part I: user's manual. Part II: code structure

Energy Technology Data Exchange (ETDEWEB)

Ryan, M.T.; Fields, D.E.

1981-05-01

PREREM is an interactive computer code developed as a data preprocessor for the INREM-II (Killough, Dunning, and Pleasant, 1978a) internal dose program. PREREM is intended to provide easy access to current and self-consistent nuclear decay and radionuclide-specific metabolic data sets. Provision is made for revision of metabolic data, and the code is intended for both production and research applications. Documentation for the code is in two parts. Part I is a user's manual which emphasizes interpretation of program prompts and choice of user input. Part II stresses internal structure and flow of program control and is intended to assist the researcher who wishes to revise or modify the code or add to its capabilities. PREREM is written for execution on a Digital Equipment Corporation PDP-10 System and much of the code will require revision before it can be run on other machines. The source program length is 950 lines (116 blocks) and computer core required for execution is 212 K bytes. The user must also have sufficient file space for metabolic and S-factor data sets. Further, 64 100 K byte blocks of computer storage space are required for the nuclear decay data file. Computer storage space must also be available for any output files produced during the PREREM execution. 9 refs., 8 tabs.

GSM BASED IRRIGATION CONTROL AND MONITORING SYSTEM

OpenAIRE

GODFREY A. MILLS; STEPHEN K. ARMOO; AGYEMAN K. ROCKSON; ROBERT A. SOWAH; MOSES A. ACQUAH

2013-01-01

Irrigated agriculture is one of the primary water consumers in most parts of the world. With developments in technology, efforts are being channeled into automation of irrigation systems to facilitate remote control of the irrigation system and optimize crop production and cost effectiveness. This paper describes an on-going work on GSM based irrigation monitoring and control systems. The objective of the work is to provide an approach that helps farmers to easily access, manage and regulate ...

12 CFR 563b.25 - What definitions apply to this part?

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false What definitions apply to this part? 563b.25... FROM MUTUAL TO STOCK FORM § 563b.25 What definitions apply to this part? The following definitions... (including controlling, controlled by, and under common control with) means the direct or indirect power to...

Process development for green part printing using binder jetting additive manufacturing

Science.gov (United States)

Miyanaji, Hadi; Orth, Morgan; Akbar, Junaid Muhammad; Yang, Li

2018-05-01

Originally developed decades ago, the binder jetting additive manufacturing (BJ-AM) process possesses various advantages compared to other additive manufacturing (AM) technologies such as broad material compatibility and technological expandability. However, the adoption of BJ-AM has been limited by the lack of knowledge with the fundamental understanding of the process principles and characteristics, as well as the relatively few systematic design guideline that are available. In this work, the process design considerations for BJ-AM in green part fabrication were discussed in detail in order to provide a comprehensive perspective of the design for additive manufacturing for the process. Various process factors, including binder saturation, in-process drying, powder spreading, powder feedstock characteristics, binder characteristics and post-process curing, could significantly affect the printing quality of the green parts such as geometrical accuracy and part integrity. For powder feedstock with low flowability, even though process parameters could be optimized to partially offset the printing feasibility issue, the qualities of the green parts will be intrinsically limited due to the existence of large internal voids that are inaccessible to the binder. In addition, during the process development, the balanced combination between the saturation level and in-process drying is of critical importance in the quality control of the green parts.

Development of fuzzy algorithm with learning function for nuclear steam generator level control

International Nuclear Information System (INIS)

Park, Gee Yong; Seong, Poong Hyun

1993-01-01

A fuzzy algorithm with learning function is applied to the steam generator level control of nuclear power plant. This algorithm can make its rule base and membership functions suited for steam generator level control by use of the data obtained from the control actions of a skilled operator or of other controllers (i.e., PID controller). The rule base of fuzzy controller with learning function is divided into two parts. One part of the rule base is provided to level control of steam generator at low power level (0 % - 30 % of full power) and the other to level control at high power level (30 % - 100 % of full power). Response time of steam generator level control at low power range with this rule base is shown to be shorter than that of fuzzy controller with direct inference. (Author)

Modeling and Control of the Springback Effect in the Bottom Sheet Metal Part One-Stage Drawing Process

Directory of Open Access Journals (Sweden)

A. S. Chumadin

2014-01-01

Full Text Available The main objective of this study is to reduce a manufacturing complexity of bottom sheet metal parts by improving the accuracy of parts produced. This study is aimed at using the finite element analysis to prove assumptions that there is a transition frontier between the processes of forming and drawing, and there are capabilities to control springback effect by moving this frontier positions.The process, the stress-strain state of which in the dome corresponds to the process of forming parts, and in the flange area to the drawing process, was considered to be a formingdrawing process.Based on previous studies, techniques to reduce a springback have been proposed which enable us to use three calculation schemes for the process simulation:The frontier transition position control between the processes of forming and drawing by changing the contact pressure on the flange by varying the frictions coefficients on the die and binder surfaces;Springback manage through the additional tensile forces in the flange area of the blank;Springback manage through the technological insert at the first process stage.For ease of comparison with previous research results the same geometric parameters and material properties of the items are used in the simulation.The springback analysis used a finite element method in the AutoFormTM incremental module with automatically mashed and standard tolerance computation properties. The blank, binder, punch, and die were then imported to the module by CATIATM interface in .iges format.The calculation has shown that the optimal value for the least thinning and springback parts are available for the second scheme whereby ring punch makes additional tension in the flange area (from 1.09 to 0.35 mm with thinning from 0.80 to 0.73 mm. The use of flange retention of sheet blank at the expense of variable frictional forces showed the springback value reduction by 4 times (from 1.09 to 0.27 mm. However thinning was 16% (from 0.80 to

Embedded software for the CEBAF RF Control Module

International Nuclear Information System (INIS)

Lahti, G.; Ashkenazi, I.; West, C.; Morgan, B.

1991-01-01

The CEBAF accelerator control system employs a distributed computer strategy. As part of this strategy, the RF control sub-system uses 342 RF Control Modules, one for each of four warm section beam forming cavities (i.e., choppers, buncher, capture) and 338 superconducting accelerating cavities. Each control module has its own microprocessor, which provides local intelligence to automatically control over 100 parameters, while keeping the user interface simple. The microprocessor controls analog and digital I/O, including the phase and gradient section, high power amplifier (HPA), and interlocks. Presently, the embedded code is used to commission the 14 RF control modules in the injector. This paper describes the operational experience of this complex real-time control system

Monolithic Controlled Delivery Systems: Part I. Basic Characteristics and Mechanisms

Directory of Open Access Journals (Sweden)

Rumiana Blagoeva

2006-04-01

Full Text Available The article considers contemporary systems for controlled delivery of active agents, such as drugs, agricultural chemicals, pollutants and additives in the environment. A useful classification of the available controlled release systems (CRS is proposed according to the type of control (passive, active or self-preprogrammed and according to the main controlling mechanism (diffusion, swelling, dissolution or erosion. Special attention is given to some of the most used CRS - polymer monoliths. The structural and physical-chemical characteristics of CRS as well as the basic approaches to their production are examined. The basic mechanisms of controlled agent release are reviewed in detail and factors influencing the release kinetics are classified according to their importance. The present study can be helpful for understanding and applying the available mathematical models and for developing more comprehensive ones intended for design of new controlled delivery systems.

Taurine Provides Neuroprotection against Retinal Ganglion Cell Degeneration

Science.gov (United States)

Froger, Nicolas; Cadetti, Lucia; Lorach, Henri; Martins, Joao; Bemelmans, Alexis-Pierre; Dubus, Elisabeth; Degardin, Julie; Pain, Dorothée; Forster, Valérie; Chicaud, Laurent; Ivkovic, Ivana; Simonutti, Manuel; Fouquet, Stéphane; Jammoul, Firas; Léveillard, Thierry; Benosman, Ryad; Sahel, José-Alain; Picaud, Serge

2012-01-01

Retinal ganglion cell (RGC) degeneration occurs in numerous retinal diseases leading to blindness, either as a primary process like in glaucoma, or secondary to photoreceptor loss. However, no commercial drug is yet directly targeting RGCs for their neuroprotection. In the 70s, taurine, a small sulfonic acid provided by nutrition, was found to be essential for the survival of photoreceptors, but this dependence was not related to any retinal disease. More recently, taurine deprivation was incriminated in the retinal toxicity of an antiepileptic drug. We demonstrate here that taurine can improve RGC survival in culture or in different animal models of RGC degeneration. Taurine effect on RGC survival was assessed in vitro on primary pure RCG cultures under serum-deprivation conditions, and on NMDA-treated retinal explants from adult rats. In vivo, taurine was administered through the drinking water in two glaucomatous animal models (DBA/2J mice and rats with vein occlusion) and in a model of Retinitis pigmentosa with secondary RGC degeneration (P23H rats). After a 6-day incubation, 1 mM taurine significantly enhanced RGCs survival (+68%), whereas control RGCs were cultured in a taurine-free medium, containing all natural amino-acids. This effect was found to rely on taurine-uptake by RGCs. Furthermore taurine (1 mM) partly prevented NMDA-induced RGC excitotoxicity. Finally, taurine supplementation increased RGC densities both in DBA/2J mice, in rats with vein occlusion and in P23H rats by contrast to controls drinking taurine-free water. This study indicates that enriched taurine nutrition can directly promote RGC survival through RGC intracellular pathways. It provides evidence that taurine can positively interfere with retinal degenerative diseases. PMID:23115615

Pre-Medicare Eligible Individuals’ Decision-Making In Medicare Part D: An Interview Study

Directory of Open Access Journals (Sweden)

Tao Jin, B.S. Pharm, Ph.D. Candidate

2010-01-01

Full Text Available ObjectivesThe objective of this study was to elicit salient beliefs among pre-Medicare eligible individuals regarding (1 the outcomes associated with enrolling in the Medicare Part D program; (2 those referents who might influence participants’ decisions about enrolling in the Part D program; and (3 the perceived barriers and facilitators facing those considering enrolling in the Part D program.MethodsFocused interviews were used for collecting data. A sample of 10 persons between 62 and 64 years of age not otherwise enrolled in the Medicare program was recruited. Interviews were audio taped and field notes were taken concurrently. Audio recordings were reviewed to amend field notes until obtaining a thorough reflection of interviews. Field notes were analyzed to elicit a group of beliefs, which were coded into perceived outcomes, the relevant others who might influence Medicare Part D enrollment decisions and perceived facilitators and impediments. By extracting those most frequently mentioned beliefs, modal salient sets of behavioral beliefs, relevant referents, and control beliefs were identified.ResultsAnalyses showed that (1 most pre-Medicare eligible believed that Medicare Part D could “provide drug coverage”, “save money on medications”, and “provide financial and health security in later life”. However, “monthly premiums”, “the formulary with limited drug coverage” and “the complexity of Medicare Part D” were perceived as major disadvantages; (2 immediate family members are most likely to influence pre-Medicare eligible’s decisions about Medicare Part D enrollment; and (3 internet and mailing educational brochures are considered to be most useful resources for Medicare Part D enrollment. Major barriers to enrollment included the complexity and inadequacy of insurance plan information.ConclusionThere are multiple factors related to decision-making surrounding the Medicare Part D enrollment. These factors

Pre-Medicare Eligible Individuals' Decision-Making In Medicare Part D: An Interview Study

Directory of Open Access Journals (Sweden)

Tao Jin

2010-01-01

Full Text Available Objectives: The objective of this study was to elicit salient beliefs among pre-Medicare eligible individuals regarding (1 the outcomes associated with enrolling in the Medicare Part D program; (2 those referents who might influence participants' decisions about enrolling in the Part D program; and (3 the perceived barriers and facilitators facing those considering enrolling in the Part D program. Methods: Focused interviews were used for collecting data. A sample of 10 persons between 62 and 64 years of age not otherwise enrolled in the Medicare program was recruited. Interviews were audio taped and field notes were taken concurrently. Audio recordings were reviewed to amend field notes until obtaining a thorough reflection of interviews. Field notes were analyzed to elicit a group of beliefs, which were coded into perceived outcomes, the relevant others who might influence Medicare Part D enrollment decisions and perceived facilitators and impediments. By extracting those most frequently mentioned beliefs, modal salient sets of behavioral beliefs, relevant referents, and control beliefs were identified. Results: Analyses showed that (1 most pre-Medicare eligible believed that Medicare Part D could "provide drug coverage", "save money on medications", and "provide financial and health security in later life". However, "monthly premiums", "the formulary with limited drug coverage" and "the complexity of Medicare Part D" were perceived as major disadvantages; (2 immediate family members are most likely to influence pre-Medicare eligible's decisions about Medicare Part D enrollment; and (3 internet and mailing educational brochures are considered to be most useful resources for Medicare Part D enrollment. Major barriers to enrollment included the complexity and inadequacy of insurance plan information. Conclusion: There are multiple factors related to decision-making surrounding the Medicare Part D enrollment. These factors include the advantages

41 CFR Appendix A to Part 60 - 300-Guidelines on a Contractor's Duty To Provide Reasonable Accommodation

Science.gov (United States)

2010-07-01

... allowing part-time or modified work schedules. For instance, flexible or adjusted work schedules could... performing his or her job. 1. A contractor is required to make reasonable accommodations to the known... qualified with respect to that process. One is “otherwise qualified” if he or she is qualified for a job...

Power and Frequency Control as it Relates to Wind-Powered Generation

Energy Technology Data Exchange (ETDEWEB)

Lacommare, Kristina S H

2010-12-20

This report is a part of an investigation of the ability of the U.S. power system to accommodate large scale additions of wind generation. The objectives of this report are to describe principles by which large multi-area power systems are controlled and to anticipate how the introduction of large amounts of wind power production might require control protocols to be changed. The operation of a power system is described in terms of primary and secondary control actions. Primary control is fast, autonomous, and provides the first-line corrective action in disturbances; secondary control takes place on a follow-up time scale and manages the deployment of resources to ensure reliable and economic operation. This report anticipates that the present fundamental primary and secondary control protocols will be satisfactory as wind power provides an increasing fraction of the total production, provided that appropriate attention is paid to the timing of primary control response, to short term wind forecasting, and to management of reserves for control action.

Software protocol design: Communication and control in a multi-task robot machine for ITER vacuum vessel assembly and maintenance

International Nuclear Information System (INIS)

Li, Ming; Wu, Huapeng; Handroos, Heikki; Yang, Guangyou; Wang, Yongbo

2015-01-01

Highlights: • A high-level protocol is proposed for the data inter-transmission. • The protocol design is task-oriented for the robot control in the software system. • The protocol functions as a role of middleware in the software. • The protocol running stand-alone as an independent process in the software provides greater security. • Providing a reference design protocol for the multi-task robot machine in the industry. - Abstract: A specific communication and control protocol for software design of a multi-task robot machine is proposed. In order to fulfill the requirements on the complicated multi machining functions and the high performance motion control, the software design of robot is divided into two main parts accordingly, which consists of the user-oriented HMI part and robot control-oriented real-time control system. The two parts of software are deployed in the different hardware for the consideration of run-time performance, which forms a client–server-control architecture. Therefore a high-level task-oriented protocol is designed for the data inter-communication between the HMI part and the control system part, in which all the transmitting data related to a machining task is divided into three categories: trajectory-oriented data, task control-oriented data and status monitoring-oriented data. The protocol consists of three sub-protocols accordingly – a trajectory protocol, task control protocol and status protocol – which are deployed over the Ethernet and run as independent processes in both the client and server computers. The protocols are able to manage the vast amounts of data streaming due to the multi machining functions in a more efficient way. Since the protocol is functioning in the software as a role of middleware, and providing the data interface standards for the developing groups of two parts of software, it also permits greater focus of both software parts developers on their own requirements-oriented design. By

Software protocol design: Communication and control in a multi-task robot machine for ITER vacuum vessel assembly and maintenance

Energy Technology Data Exchange (ETDEWEB)

Li, Ming, E-mail: ming.li@lut.fi [Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland); Wu, Huapeng; Handroos, Heikki [Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland); Yang, Guangyou [School of Mechanical Engineering, Hubei University of Technology, Wuhan (China); Wang, Yongbo [Laboratory of Intelligent Machines, Lappeenranta University of Technology (Finland)

2015-10-15

Highlights: • A high-level protocol is proposed for the data inter-transmission. • The protocol design is task-oriented for the robot control in the software system. • The protocol functions as a role of middleware in the software. • The protocol running stand-alone as an independent process in the software provides greater security. • Providing a reference design protocol for the multi-task robot machine in the industry. - Abstract: A specific communication and control protocol for software design of a multi-task robot machine is proposed. In order to fulfill the requirements on the complicated multi machining functions and the high performance motion control, the software design of robot is divided into two main parts accordingly, which consists of the user-oriented HMI part and robot control-oriented real-time control system. The two parts of software are deployed in the different hardware for the consideration of run-time performance, which forms a client–server-control architecture. Therefore a high-level task-oriented protocol is designed for the data inter-communication between the HMI part and the control system part, in which all the transmitting data related to a machining task is divided into three categories: trajectory-oriented data, task control-oriented data and status monitoring-oriented data. The protocol consists of three sub-protocols accordingly – a trajectory protocol, task control protocol and status protocol – which are deployed over the Ethernet and run as independent processes in both the client and server computers. The protocols are able to manage the vast amounts of data streaming due to the multi machining functions in a more efficient way. Since the protocol is functioning in the software as a role of middleware, and providing the data interface standards for the developing groups of two parts of software, it also permits greater focus of both software parts developers on their own requirements-oriented design. By

Multiprocessor development for robot control

International Nuclear Information System (INIS)

Lee, Jong Min; Kim, Seung Ho; Hwang, Suk Yeoung; Sohn, Surg Won; Kim, Byung Soo; Kim, Chang Hoi; Lee, Yong Bum; Kim, Woong Ki

1988-12-01

The object of this project is to develop a multiprocessor system which is essential to robot technology. A multiprocessor system interconnecting many single board computer is much faster and flexible than a single processor. The developed multiprocessor will be used to control nuclear mobile robot, so a loosely coupled system is adopted as a robot controller. A total configuration of controller is divided into three main parts in related with its function. It is consisted of supervisory control part, functional control part, remote control part. The designed control system is to be expanded easily for further use with a modular architecture, so the functional independency within sub-systems can be obtained throughout the system structure. Electromagnetic interference affecting to the control system is minimized by using optical fiber as communication media between robot and control system. System performances is enhanced not only by using distributed architecture in hardware, but by adopting real-time, multi-tasking operating system in software. The iRMX86 OS is used and reconfigured for real-time, multi-tasking operation. RS-485 serial communication protocol is used between functional control part and remote control part. Since the developed multiprocessor control system is an essential and fundamental technology for artificial intelligent robot, the result of this project can be applied directly to nuclear mobile robot. (Author)

Modification of the "Preventing Child Abuse and Neglect" (PCAN) Curriculum for IDEA Part C Providers

Science.gov (United States)

Kilburn, Janice E.; Shapiro, Cheri J.

2015-01-01

Strategic workforce training of organizations that provide services to families of young children with special needs can help strengthen families and prevent child maltreatment, but few curriculua are available for this purpose. One professional development curriculum, "Preventing Child Abuse and Neglect: Parent-Provider Partnerships in Child…

Compressor noise control begins with design--Part 1

International Nuclear Information System (INIS)

Frank, L.

1993-01-01

This paper describes the typical methods used by oil and gas pipeline companies to reduce the noise level associated with their pump and compressor stations. The common method is for the design engineer to specify an acceptable noise level at a specified distance. Unfortunately, the results by this method are rarely acceptable because vendors have not considered the effects of sound propagation outside the station, the owners have not considered the cumulative effect of various machinery, and there is little methodology available to distinguish the individual components which might be contributing the acoustically unacceptable noise levels in a multi-component system. This article stresses balanced noise control designs using noise control engineering

Plant lighting system with five wavelength-band light-emitting diodes providing photon flux density and mixing ratio control

Directory of Open Access Journals (Sweden)

Yano Akira

2012-11-01

Full Text Available Abstract Background Plant growth and development depend on the availability of light. Lighting systems therefore play crucial roles in plant studies. Recent advancements of light-emitting diode (LED technologies provide abundant opportunities to study various plant light responses. The LED merits include solidity, longevity, small element volume, radiant flux controllability, and monochromaticity. To apply these merits in plant light response studies, a lighting system must provide precisely controlled light spectra that are useful for inducing various plant responses. Results We have developed a plant lighting system that irradiated a 0.18 m2 area with a highly uniform distribution of photon flux density (PFD. The average photosynthetic PFD (PPFD in the irradiated area was 438 micro-mol m–2 s–1 (coefficient of variation 9.6%, which is appropriate for growing leafy vegetables. The irradiated light includes violet, blue, orange-red, red, and far-red wavelength bands created by LEDs of five types. The PFD and mixing ratio of the five wavelength-band lights are controllable using a computer and drive circuits. The phototropic response of oat coleoptiles was investigated to evaluate plant sensitivity to the light control quality of the lighting system. Oat coleoptiles irradiated for 23 h with a uniformly distributed spectral PFD (SPFD of 1 micro-mol m–2 s–1 nm–1 at every peak wavelength (405, 460, 630, 660, and 735 nm grew almost straight upwards. When they were irradiated with an SPFD gradient of blue light (460 nm peak wavelength, the coleoptiles showed a phototropic curvature in the direction of the greater SPFD of blue light. The greater SPFD gradient induced the greater curvature of coleoptiles. The relation between the phototropic curvature (deg and the blue-light SPFD gradient (micro-mol m–2 s–1 nm–1 m–1 was 2 deg per 1 micro-mol m–2 s–1 nm–1 m–1. Conclusions The plant lighting system, with a computer with a

Full Gradient Solution to Adaptive Hybrid Control

Science.gov (United States)

Bean, Jacob; Schiller, Noah H.; Fuller, Chris

2017-01-01

This paper focuses on the adaptation mechanisms in adaptive hybrid controllers. Most adaptive hybrid controllers update two filters individually according to the filtered reference least mean squares (FxLMS) algorithm. Because this algorithm was derived for feedforward control, it does not take into account the presence of a feedback loop in the gradient calculation. This paper provides a derivation of the proper weight vector gradient for hybrid (or feedback) controllers that takes into account the presence of feedback. In this formulation, a single weight vector is updated rather than two individually. An internal model structure is assumed for the feedback part of the controller. The full gradient is equivalent to that used in the standard FxLMS algorithm with the addition of a recursive term that is a function of the modeling error. Some simulations are provided to highlight the advantages of using the full gradient in the weight vector update rather than the approximation.

A water pumping control system with a programmable logic controller (PLC) and industrial wireless modules for industrial plants--an experimental setup.

Science.gov (United States)

Bayindir, Ramazan; Cetinceviz, Yucel

2011-04-01

This paper describes a water pumping control system that is designed for production plants and implemented in an experimental setup in a laboratory. These plants contain harsh environments in which chemicals, vibrations or moving parts exist that could potentially damage the cabling or wires that are part of the control system. Furthermore, the data has to be transferred over paths that are accessible to the public. The control systems that it uses are a programmable logic controller (PLC) and industrial wireless local area network (IWLAN) technologies. It is implemented by a PLC, an communication processor (CP), two IWLAN modules, and a distributed input/output (I/O) module, as well as the water pump and sensors. Our system communication is based on an Industrial Ethernet and uses the standard Transport Control Protocol/Internet Protocol for parameterisation, configuration and diagnostics. The main function of the PLC is to send a digital signal to the water pump to turn it on or off, based on the tank level, using a pressure transmitter and inputs from limit switches that indicate the level of the water in the tank. This paper aims to provide a convenient solution in process plants where cabling is not possible. It also has lower installation and maintenance cost, provides reliable operation, and robust and flexible construction, suitable for industrial applications. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

Filtering and control of stochastic jump hybrid systems

CERN Document Server

Yao, Xiuming; Zheng, Wei Xing

2016-01-01

This book presents recent research work on stochastic jump hybrid systems. Specifically, the considered stochastic jump hybrid systems include Markovian jump Ito stochastic systems, Markovian jump linear-parameter-varying (LPV) systems, Markovian jump singular systems, Markovian jump two-dimensional (2-D) systems, and Markovian jump repeated scalar nonlinear systems. Some sufficient conditions are first established respectively for the stability and performances of those kinds of stochastic jump hybrid systems in terms of solution of linear matrix inequalities (LMIs). Based on the derived analysis conditions, the filtering and control problems are addressed. The book presents up-to-date research developments and novel methodologies on stochastic jump hybrid systems. The contents can be divided into two parts: the first part is focused on robust filter design problem, while the second part is put the emphasis on robust control problem. These methodologies provide a framework for stability and performance analy...

Procurement and control of spare and replacement parts - a regulatory perspective

International Nuclear Information System (INIS)

Baker, E.T.; Grimes, B.K.; Merschoff, E.W.

1987-01-01

As the nuclear industry shifts from a construction to an operations orientation, a number of fundamental changes have occurred in the type of safety-related procurements and the manner in which the utilities accomplish these procurements. Specifically, procurements have shifted from the purchase of large systems and components by architect-engineers, and nuclear steam supply system (NSSS) suppliers to the procurement by utilities of subassemblies, individual pieces of equipment (e.g., breakers, relays), and small parts for repairing individual pieces of equipment. To ensure that equipment will continue to perform its intended function and to satisfy regulatory requirements utilities must consider several things: (1) does the equipment perform a safety function; (2) does the replacement part affect the safety function; and (3) does the replacement part affect the seismic or environmental qualification. If the answer to any of these questions is yes, the purchaser has two alternatives. He may procure the item as safety-related and require the supplier or manufacturer to comply with all the applicable technical and quality requirements or he may purchase the item commercial grade and perform the necessary inspections and tests to ensure the item meets the requirements, i.e., dedicate the item

Remote control manipulator

Energy Technology Data Exchange (ETDEWEB)

Sugawara, T

1970-02-28

A prior-art remote control manipulator comprises a horizontal suspension section, a master arm and a slave arm which are coupled to ends of the suspension section in a manner to pivotally move relative to the suspension section, and a connecting device which includes a tape and which joins both the arms. When the connecting device malfunctions, the slave arm can neither be extended nor contracted. Means to keep the tension of the tape is required which restricts the extension length of the slave arm. Further, the slave arm can be moved only in the axial direction. The invention described provides an improved remote control manipulator of the specified type. A moving device which moves the slave arm relative to the master arm without the intervention of the connecting device is mounted on a movable part of the slave arm, while pulleys which maintain the joining relationship of the connecting device are mounted on the movable part and fixed part of the slave arm. Owing to this construction, movement of the slave arm is assured despite troubles which may arise in the connecting device. In addition, no slack arises in the tape. By applying a similar construction to the horizontal suspension section, the suspension section can be stretched, and hence, the slave arm can be moved in a direction orthogonal to its axis.

Analysis of Offshore Knuckle Boom Crane - Part Two: Motion Control

Directory of Open Access Journals (Sweden)

Morten K. Bak

2013-10-01

Full Text Available In this paper design of electro-hydraulic motion control systems for offshore knuckle boom cranes is discussed. The influence of the control valve bandwidth along with the ramp time for the control signal are investigated both analytically with simplified system models and numerically with an experimentally verified crane model. The results of both types of investigations are related to general design rules for selection of control valves and ramp times and the relevance of these design rules is discussed. Generally, they are useful but may be too conservative for offshore knuckle boom cranes. However, as demonstrated in the paper, the only proper way to determine this is to evaluate the motion control system design by means of simulation.

H2 Control for the Continuous-Time Markovian Jump Linear Uncertain Systems with Partly Known Transition Rates and Input Quantization

Directory of Open Access Journals (Sweden)

Xin-Gang Zhao

2013-01-01

Full Text Available For a class of continuous-time Markovian jump linear uncertain systems with partly known transition rates and input quantization, the H2 state-feedback control design is considered. The elements in the transition rates matrix include completely known, boundary known, and completely unknown ones. First, an H2 cost index for Markovian jump linear uncertain systems is introduced; then by introducing a new matrix inequality condition, sufficient conditions are formulated in terms of linear matrix inequalities (LMIs for the H2 control of the Markovian jump linear uncertain systems. Less conservativeness is achieved than the result obtained with the existing technique. Finally, a numerical example is given to verify the validity of the theoretical results.

Selective visual attention for ugly and beautiful body parts in eating disorders.

Science.gov (United States)

Jansen, Anita; Nederkoorn, Chantal; Mulkens, Sandra

2005-02-01

Body image disturbance is characteristic of eating disorders, and current treatments use body exposure to reduce bad body feelings. There is however little known about the cognitive effects of body exposure. In the present study, eye movement registration (electroculography) as a direct index of selective visual attention was used while eating symptomatic and normal control participants were exposed to digitalized pictures of their own body and control bodies. The data showed a decreased focus on their own 'beautiful' body parts in the high symptomatic participants, whereas inspection of their own 'ugly' body parts was given priority. In the normal control group a self-serving cognitive bias was found: they focused more on their own 'beautiful' body parts and less on their own 'ugly' body parts. When viewing other bodies the pattern was reversed: high symptom participants allocated their attention to the beautiful parts of other bodies, whereas normal controls concentrated on the ugly parts of the other bodies. From the present findings the hypothesis follows that a change in the processing of information might be needed for body exposure to be successful.

Communication, control and security challenges for the smart grid

CERN Document Server

Muyeen, SM

2017-01-01

The Smart Grid is a modern electricity grid allowing for distributed, renewable intermittent generation, partly owned by consumers. This requires advanced control and communication technologies in order to provide high quality power supply and secure generation, transmission and distribution. This book outlines these emerging technologies.

Update on rheumatology: part 1.

Science.gov (United States)

Neal-Boylan, Leslie

2009-05-01

There are many rheumatic diseases. Part 1 of this 2 part series on rheumatology presented a few of those most commonly seen in the community. Home health clinicians can be helpful in managing these diseases and preventing progression by watching for new symptoms or acute attacks of pain or disability, ensuring that patients take their medications appropriately, reminding patients to see their rheumatology providers and have their lab work done regularly, and reporting adverse effects to medications promptly. Additionally, as with most home health patients, an interdisciplinary approach that includes physical and occupational therapy, social work, nursing, nutrition, and other disciplines as needed should be implemented so that all patient needs are met and the patient is discharged at the highest level of self-care that is possible. Part 2 of this series will discuss the care of the patient with rheumatic disease at home and will provide a more in-depth look at lab diagnosis of rheumatic diseases.

Human-Inspired Eigenmovement Concept Provides Coupling-Free Sensorimotor Control in Humanoid Robot

Czech Academy of Sciences Publication Activity Database

Alexandrov, A.V.; Lippi, V.; Mergner, T.; Frolov, A. A.; Hettich, G.; Húsek, Dušan

2017-01-01

Roč. 11, 25 April (2017), č. článku 22. ISSN 1662-5188 Institutional support: RVO:67985807 Keywords : human sensorimotor system * neuromechanics * biorobotics * motor control * eigenmovements Subject RIV: JD - Computer Applications, Robotics OBOR OECD: Robotics and automatic control Impact factor: 1.821, year: 2016

Nuclear reactor kinetics and plant control

CERN Document Server

Oka, Yoshiaki

2013-01-01

Understanding time-dependent behaviors of nuclear reactors and the methods of their control is essential to the operation and safety of nuclear power plants. This book provides graduate students, researchers, and engineers in nuclear engineering comprehensive information on both the fundamental theory of nuclear reactor kinetics and control and the state-of-the-art practice in actual plants, as well as the idea of how to bridge the two. The first part focuses on understanding fundamental nuclear kinetics. It introduces delayed neutrons, fission chain reactions, point kinetics theory, reactivit

Erosion control works and the intensity of soil erosion in the upper part of the river Toplica drainage basin

International Nuclear Information System (INIS)

Kostadinov, S; Dragovic, N; Zlatic, M; Todosijevic, M

2008-01-01

Aiming at the protection of the future storage 'Selova' against erosion and sediment, and also to protect the settlements and roads in the drainage basin against torrential floods, erosion control works in the upper part of the river Toplica basin, upstream of the storage 'Selova', started in 1947. The works included building-technical works (check dams) and biological works (afforestation and grassing of bare lands and other erosion risk areas). Within the period 1947-2006, the following erosion control works were executed: afforestation of bare lands on the slopes 2,257.00 ha, grassing of bare lands 1,520.00 ha, and altogether 54 dams were constructed in the river Toplica tributaries. This caused the decrease of sediment transport in the main flow of the river Toplica. This paper, based on the field research conducted in two time periods: 1988 and in the period 2004-2007, presents the state of erosion in the basin before erosion control works; type and scope of erosion control works and their effect on the intensity of erosion in the river Toplica basin upstream of the future storage 'Selova'.

A Calculation of hydrodynamic noise of control valve on instrumentation and control system using smart plant

International Nuclear Information System (INIS)

Demon Handoyo; Djoko H Nugroho

2012-01-01

It has been calculated characteristics of the control valve Instrumentation and Control Systems using Smart Plant software. This calculation is done in order to control the valve that will be installed as part of the instrumentation and control systems to provide the performance according to the design. The characteristics that have been calculated are Reynolds number factors which are related to the flow regime in the valve. Critical pressure factor, Valve Hydrodynamic cavitation and noise index. In this paper the discussion will be limited to matters relating to Hydrodynamic noise generation process using model of the instrumentation and control system in the plant design in yellow cake PIPKPP activities in 2012. The results of the calculation of the noise on the valves design are in the range between 9.58~70.1 dBA. (author)

Structure Property Studies for Additively Manufactured Parts

Energy Technology Data Exchange (ETDEWEB)

Milenski, Helen M [Univ. of Mexico, Los Alamos, NM (United States); Schmalzer, Andrew Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kelly, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-08-17

Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

Controle de estoque de peças de reposição em local único: uma revisão da literatura Single location spare parts inventory control: the state of the art

Directory of Open Access Journals (Sweden)

José Roberto do Rego

2011-01-01

Full Text Available Estoques de peças de reposição atendem necessidades de manutenção e reparo de produtos de consumo, veículos, máquinas e equipamentos industriais, acarretando frequentemente altos custos de capital e forte impacto no nível de serviço aos clientes. A grande multiplicidade de componentes, com ciclos de vida mais curtos e baixas demandas dificultam a gestão destes estoques. Este artigo apresenta revisão da literatura sobre modelos de controle de estoques de peças de reposição em local único, abordando tanto a previsão de demanda quanto o controle de estoques nos diferentes estágios do ciclo de vida das peças. A partir do levantamento bibliográfico, identificam-se algumas lacunas referentes à decisão de estocagem ou não de um item, elaboração de pedidos iniciais e finais, na integração de modelos de previsão de demanda com o controle de estoque e também de estudos de caso na aplicação prática dos modelos.Spare parts inventory are needed for maintenance and repair of final products, vehicles, industrial machines and equipments, frequently requiring high investments and significantly affecting customer satisfaction. Inventory management is complex due to the large number of different items and low demands. This article presents a literature review on single location spare parts inventory control, embracing both demand forecasting techniques and inventory control decisions on the different life cycle stages. Overall, the literature review identified the following research opportunities on inventory management: criteria to decide to stock or not an item, how many to order in the first and the last batch, demand forecasting and inventory control models integration and case studies on real applications.

Randomized, Controlled Trial of CBT Training for PTSD Providers

Science.gov (United States)

2013-10-01

behavioral therapy (CBT) interventions have been shown to be effective in alleviating symptoms of Post - Traumatic Stress Disorder ( PTSD ) and related... traumatic stress disorder treatment providers: design and methods for a randomized, prospective intervention study. Implement Sci, 7, 43. doi: 10.1186...Friedman, M. J., Young-Xu, Y., & Stevens, S. P. (2006). Cognitive processing therapy for veterans with military-related posttraumatic stress disorder

ADEX optimized adaptive controllers and systems from research to industrial practice

CERN Document Server

Martín-Sánchez, Juan M

2015-01-01

This book is a didactic explanation of the developments of predictive, adaptive predictive and optimized adaptive control, including the latest methodology of adaptive predictive expert (ADEX) control, and their practical applications. It is focused on the stability perspective, used in the introduction of these methodologies, and is divided into six parts, with exercises and real-time simulations provided for the reader as appropriate. ADEX Optimized Adaptive Controllers and Systems begins with the conceptual and intuitive knowledge of the technology and derives the stability conditions to be verified by the driver block and the adaptive mechanism of the optimized adaptive controller to guarantee achievement of desired control performance. The second and third parts are centered on the design of the driver block and adaptive mechanism, which verify these stability conditions. The authors then proceed to detail the stability theory that supports predictive, adaptive predictive and optimized adaptive control m...

Proposed changes for part N of suggested state regulations

Energy Technology Data Exchange (ETDEWEB)

Paris, R.

1997-02-01

This paper discusses proposed changes for Part N regulations regarding naturally occuring radioactive materials. It describes the work of the Commission on NORM of the Conference of Radiation Control Program Directors (CRCPD), toward adjusting the regulations. A set of questions was formulated and a review panel established to address these questions and come back with recommended actions. The panel recommended the distinction that the material being regulated is `Technologically Enhanced Naturally Occurring Radioactive Material` (TENORM). By this they mean `naturally occurring radioactive material not regulated under the Atomic Energy Act (AEA) whose radionuclide concentrations have been increased by or as a result of human practices.` Recommendations also include: using a dose based instead of concentration based standard; refined definition of exemptions from regulations; exclusion of radon from Total Effective Dose Equivalent (TEDE) calculations; provide states flexibility in implementation; inclusion of prospective remedial and operations aspects for TENORM; provision of institutional controls.

Active Disturbance Rejection Approach for Robust Fault-Tolerant Control via Observer Assisted Sliding Mode Control

Directory of Open Access Journals (Sweden)

John Cortés-Romero

2013-01-01

Full Text Available This work proposes an active disturbance rejection approach for the establishment of a sliding mode control strategy in fault-tolerant operations. The core of the proposed active disturbance rejection assistance is a Generalized Proportional Integral (GPI observer which is in charge of the active estimation of lumped nonlinear endogenous and exogenous disturbance inputs related to the creation of local sliding regimes with limited control authority. Possibilities are explored for the GPI observer assisted sliding mode control in fault-tolerant schemes. Convincing improvements are presented with respect to classical sliding mode control strategies. As a collateral advantage, the observer-based control architecture offers the possibility of chattering reduction given that a significant part of the control signal is of the continuous type. The case study considers a classical DC motor control affected by actuator faults, parametric failures, and perturbations. Experimental results and comparisons with other established sliding mode controller design methodologies, which validate the proposed approach, are provided.

47 CFR 27.3 - Other applicable rule parts.

Science.gov (United States)

2010-10-01

... standards and procedures concerning the marketing and importation of radio frequency devices, and for.... This part sets forth the requirements and conditions applicable to commercial mobile radio service providers. (h) Part 22. This part sets forth the requirements and conditions applicable to public mobile...

Preparing supervisors to provide safeguarding supervision for healthcare staff.

Science.gov (United States)

Smikle, Marcia

2017-11-28

This paper outlines why experienced supervisors at a London healthcare provider received skills training so they could offer safeguarding supervision to front-line colleagues with case management responsibilities for vulnerable children and young people. It examines how supervisors use the main functions of supervision and a cycle of reflection in clinical practice with supervisees. As well as the professional issues encountered by supervisors in relation to the benefits, the challenges of providing supervision and the action required to make safeguarding supervision a part of the organisational culture are also explored. ©2017 RCN Publishing Company Ltd. All rights reserved. Not to be copied, transmitted or recorded in any way, in whole or part, without prior permission of the publishers.

Legendre-tau approximation for functional differential equations. Part 2: The linear quadratic optimal control problem

Science.gov (United States)

Ito, K.; Teglas, R.

1984-01-01

The numerical scheme based on the Legendre-tau approximation is proposed to approximate the feedback solution to the linear quadratic optimal control problem for hereditary differential systems. The convergence property is established using Trotter ideas. The method yields very good approximations at low orders and provides an approximation technique for computing closed-loop eigenvalues of the feedback system. A comparison with existing methods (based on averaging and spline approximations) is made.

Delays and networked control systems

CERN Document Server

Hetel, Laurentiu; Daafouz, Jamal; Johansson, Karl

2016-01-01

This edited monograph includes state-of-the-art contributions on continuous time dynamical networks with delays. The book is divided into four parts. The first part presents tools and methods for the analysis of time-delay systems with a particular attention on control problems of large scale or infinite-dimensional systems with delays. The second part of the book is dedicated to the use of time-delay models for the analysis and design of Networked Control Systems. The third part of the book focuses on the analysis and design of systems with asynchronous sampling intervals which occur in Networked Control Systems. The last part of the book exposes several contributions dealing with the design of cooperative control and observation laws for networked control systems. The target audience primarily comprises researchers and experts in the field of control theory, but the book may also be beneficial for graduate students. .

Controlled, Constrained, or Flexible? How Self-Management Goals Are Shaped By Patient-Provider Interactions.

Science.gov (United States)

Franklin, Marika; Lewis, Sophie; Willis, Karen; Rogers, Anne; Venville, Annie; Smith, Lorraine

2018-06-01

A person-centered approach to goal-setting, involving collaboration between patients and health professionals, is advocated in policy to support self-management. However, this is difficult to achieve in practice, reducing the potential effectiveness of self-management support. Drawing on observations of consultations between patients and health professionals, we examined how goal-setting is shaped in patient-provider interactions. Analysis revealed three distinct interactional styles. In controlled interactions, health professionals determine patients' goals based on biomedical reference points and present these goals as something patients should do. In constrained interactions, patients are invited to present goals, yet health professionals' language and questions orientate goals toward biomedical issues. In flexible interactions, patients and professionals both contribute to goal-setting, as health professionals use less directive language, create openings, and allow patients to decide on their goals. Findings suggest that interactional style of health professionals could be the focus of interventions when aiming to increase the effectiveness of goal-setting.

21 CFR 1405.100 - What does this part do?

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false What does this part do? 1405.100 Section 1405.100 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE (FINANCIAL ASSISTANCE) Purpose and Coverage § 1405.100 What does this part do? This part carries...

UNICOS CPC6: automated code generation for process control applications

International Nuclear Information System (INIS)

Fernandez Adiego, B.; Blanco Vinuela, E.; Prieto Barreiro, I.

2012-01-01

The Continuous Process Control package (CPC) is one of the components of the CERN Unified Industrial Control System framework (UNICOS). As a part of this framework, UNICOS-CPC provides a well defined library of device types, a methodology and a set of tools to design and implement industrial control applications. The new CPC version uses the software factory UNICOS Application Builder (UAB) to develop CPC applications. The CPC component is composed of several platform oriented plug-ins (PLCs and SCADA) describing the structure and the format of the generated code. It uses a resource package where both, the library of device types and the generated file syntax, are defined. The UAB core is the generic part of this software, it discovers and calls dynamically the different plug-ins and provides the required common services. In this paper the UNICOS CPC6 package is introduced. It is composed of several plug-ins: the Instance generator and the Logic generator for both, Siemens and Schneider PLCs, the SCADA generator (based on PVSS) and the CPC wizard as a dedicated plug-in created to provide the user a friendly GUI (Graphical User Interface). A tool called UAB Bootstrap will manage the different UAB components, like CPC, and its dependencies with the resource packages. This tool guides the control system developer during the installation, update and execution of the UAB components. (authors)

40 CFR 85.2105 - Aftermarket parts.

Science.gov (United States)

2010-07-01

... aftermarket part in the maintenance or repair of a vehicle. A vehicle manufacturer that honors a valid....2107(c). (b) Except as provided in § 85.2104(h), a vehicle manufacturer may deny an emission performance warranty claim on the basis of an uncertified aftermarket part used in the maintenance or repair...