WorldWideScience

Sample records for part 1 theoretical development

  1. MP Salsa: a finite element computer program for reacting flow problems. Part 1--theoretical development

    Energy Technology Data Exchange (ETDEWEB)

    Shadid, J.N.; Moffat, H.K.; Hutchinson, S.A.; Hennigan, G.L.; Devine, K.D.; Salinger, A.G.

    1996-05-01

    The theoretical background for the finite element computer program, MPSalsa, is presented in detail. MPSalsa is designed to solve laminar, low Mach number, two- or three-dimensional incompressible and variable density reacting fluid flows on massively parallel computers, using a Petrov-Galerkin finite element formulation. The code has the capability to solve coupled fluid flow, heat transport, multicomponent species transport, and finite-rate chemical reactions, and to solver coupled multiple Poisson or advection-diffusion- reaction equations. The program employs the CHEMKIN library to provide a rigorous treatment of multicomponent ideal gas kinetics and transport. Chemical reactions occurring in the gas phase and on surfaces are treated by calls to CHEMKIN and SURFACE CHEMKIN, respectively. The code employs unstructured meshes, using the EXODUS II finite element data base suite of programs for its input and output files. MPSalsa solves both transient and steady flows by using fully implicit time integration, an inexact Newton method and iterative solvers based on preconditioned Krylov methods as implemented in the Aztec solver library.

  2. Analytical study for frequency effects on the EPRI/USNRC piping component tests. Part 1: Theoretical basis and model development

    International Nuclear Information System (INIS)

    Adams, T.M.; Branch, E.B.; Tagart, S.W. Jr.

    1994-01-01

    As part of the engineering effort for the Advanced Light Water Reactor the Advanced Reactor Corporation formed a Piping Technical Core Group to develop a set of improved ASME Boiler and Pressure Vessel Code, Section III design rules and approaches for ALWR plant piping and support design. The technical basis for the proposed changes to the ASME Boiler and Pressure Vessel Code developed by Technical Core Group for the design of piping relies heavily on the failure margins determined from the EPRI/USNRC piping component test program. The majority of the component tests forming the basis for the reported margins against failure were run with input frequency to natural frequency ratios (Ω/ω) in the range of 0.74 to 0.87. One concern investigated by the Technical Core Group was the effect which could exist on measured margins if the tests had been run at higher or lower frequency ratios than those in the limited frequency ratio range tested. Specifically, the concern investigated was that the proposed Technical Core Group Piping Stress Criteria will allow piping to be designed in the low frequency range (Ω/ω ≥ 2.0) for which there is little test data from the EPRI/USNRC test program. The purpose of this analytical study was to: (1) evaluate the potential for margin variation as a function of the frequency ratio (R ω = Ω/ω, where Ω is the forcing frequency and ω is the natural component frequency), (2) recommend a margin reduction factor (MRF) that could be applied to margins determined from the EPRI/USNRC test program to adjust those margins for potential margin variation with frequency ratio. Presented in this paper is the analytical approach and methodology, which are inelastic analysis, which was the basis of the study. Also, discussed is the development of the analytical model, the procedure used to benchmark the model to actual test results, and the various parameter studies conducted

  3. GSTARS computer models and their applications, part I: theoretical development

    Science.gov (United States)

    Yang, C.T.; Simoes, F.J.M.

    2008-01-01

    GSTARS is a series of computer models developed by the U.S. Bureau of Reclamation for alluvial river and reservoir sedimentation studies while the authors were employed by that agency. The first version of GSTARS was released in 1986 using Fortran IV for mainframe computers. GSTARS 2.0 was released in 1998 for personal computer application with most of the code in the original GSTARS revised, improved, and expanded using Fortran IV/77. GSTARS 2.1 is an improved and revised GSTARS 2.0 with graphical user interface. The unique features of all GSTARS models are the conjunctive use of the stream tube concept and of the minimum stream power theory. The application of minimum stream power theory allows the determination of optimum channel geometry with variable channel width and cross-sectional shape. The use of the stream tube concept enables the simulation of river hydraulics using one-dimensional numerical solutions to obtain a semi-two- dimensional presentation of the hydraulic conditions along and across an alluvial channel. According to the stream tube concept, no water or sediment particles can cross the walls of stream tubes, which is valid for many natural rivers. At and near sharp bends, however, sediment particles may cross the boundaries of stream tubes. GSTARS3, based on FORTRAN 90/95, addresses this phenomenon and further expands the capabilities of GSTARS 2.1 for cohesive and non-cohesive sediment transport in rivers and reservoirs. This paper presents the concepts, methods, and techniques used to develop the GSTARS series of computer models, especially GSTARS3. ?? 2008 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

  4. Thoron Mitigation System based on charcoal bed for applications in thorium fuel cycle facilities (part 1): Development of theoretical models for design considerations.

    Science.gov (United States)

    Sahoo, B K; Sudeep Kumara, K; Karunakara, N; Gaware, J J; Sapra, B K; Mayya, Y S

    2017-06-01

    Regulating the environmental discharge of 220 Rn (historically known as thoron) and its decay products from thorium processing facilities is important for protection of environment and general public living in the vicinities. Activated charcoal provides an effective solution to this problem because of its high adsorption capacity to gaseous element like radon. In order to design and develop a charcoal based Thoron Mitigation System, a mathematical model has been developed in the present work for studying the 220 Rn transport and adsorption in a flow through charcoal bed and estimating the 220 Rn mitigation factor (MF) as a function of system and operating parameters. The model accounts for inter- and intra-grain diffusion, advection, radioactive decay and adsorption processes. Also, the effects of large void fluctuation and wall channeling on the mitigation factor have been included through a statistical model. Closed form solution has been provided for the MF in terms of adsorption coefficient, system dimensions, grain size, flow rate and void fluctuation exponent. It is shown that the delay effects due to intra grain diffusion plays a significant role thereby rendering external equilibrium assumptions unsuitable. Also, the application of the statistical model clearly demonstrates the transition from the exponential MF to a power-law form and shows how the occurrence of channels with low probability can lower mitigation factor by several orders of magnitude. As a part of aiding design, the model is further extended to optimise the bed dimensions in respect of pressure drop and MF. The application of the results for the design and development of a practically useful charcoal bed is discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Real-time Identification and Control of Satellite Signal Impairments Solution and Application of the Stratonovich Equation Part 1. Theoretical Development

    Science.gov (United States)

    Manning, Robert M.

    2016-01-01

    As satellite communications systems become both more complex and reliant with respect to their operating environment, it has become imperative to be able to identify, during real-time operation, the onset of one or more impairments to the quality of overall communications system integrity. One of the most important aspects to monitor of a satellite link operating within the Earth's atmosphere is the signal fading due to the occurrence of rain and/or phase scintillations. This, of course, must be done in the presence of the associated measurement uncertainty or potentially faulty measurement equipment such as in the Advanced Communication Technology Satellite (ACTS) experiment. In the present work, an approach originally suggested in 1991, and apparently still considered iconoclastic, will be significantly developed and applied to the satellite communications link on which the deleterious composite signal fade is the result of one or many component fade mechanisms. Through the measurement (with the attendant uncertainty or 'error' in the measurement) of such a composite fading satellite signal, it is desired to extract the level of each of the individual fading mechanisms so they can be appropriately mitigated before they impact the overall performance of the communications network. Rather than employing simple-minded deterministic filtering to the real-time fading, the present approach is built around all the models and/or descriptions used to describe the individual fade components, including their dynamic evolution. The latter is usually given by a first-order Langevin equation. This circumstance allows the description of the associated temporal transition probability densities of each of the component processes. By using this description, along with the real-time measurements of the composite fade (along with the measurement errors), one can obtain statistical estimates of the levels of each of the component fading mechanisms as well as their predicted values

  6. 12 CFR Appendix 1 to Part 24 - CD-1-National Bank Community Development (Part 24) Investments

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false CD-1-National Bank Community Development (Part 24) Investments 1 Appendix 1 To Part 24 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF... PUBLIC WELFARE INVESTMENTS Pt. 24, App. 1 Appendix 1 To Part 24—CD-1—National Bank Community Development...

  7. A Theory of Intellectual Development: Part 1.

    Science.gov (United States)

    Confrey, Jere

    1994-01-01

    Part 1 of a three-part article analyzing radical constructivism (as one interpretation of Piaget) and the socio-cultural perspective (as one interpretation of Vygotsky), including major principles, primary contributions to mathematics education, and potential limitations. Introduces an integration of the two theories through a feminist…

  8. Developing preceptorship through action research: Part 1.

    Science.gov (United States)

    Hilli, Yvonne; Melender, Hanna-Leena

    2015-09-01

    Clinical preception in practice plays a significant role in both registered and practical nurse studies. As such, the cooperation between the faculty and working life is important to narrow the theory-practice gap, with emphasis being placed on a student-oriented approach promoting self-direction and lifelong learning. The aim of this project was to develop the preceptorship at five different units within the health-care sector in western Finland by implementing an action research (AR) approach. This article is the first of a two-part article on the project, focusing on a cultural analysis and the development of preception models conducted within the project. The five units participating in the study were the following: a long-term care ward in the community, a ward for people with dementia, a geriatric ward, a medical ward and a surgical ward representing specialised care. The starting point of the study was a cultural analysis, which was made in all the five units to obtain a 'bottom-up' perspective. In each of the five units 3-5 nurses were appointed to become members of the core groups. This meant that all the units would start from the perspective of their own working environment when creating a preception model that would fit into their particular workplace. During this process, the participants received continuous support from the researchers. Several workshops and seminars were also arranged to further support the core groups and staff. The models were implemented and tested during the academic year 2010-2011 followed by an evaluation of the project. The evaluation results will be presented in the second part of the two-part article. The project showed that reflective practice and critical thinking can be improved through an AR approach. © 2015 Nordic College of Caring Science.

  9. Probabilistic methods applied to the safety of nuclear power plant: annual report - 1980. Part. 1: theoretical fundaments

    International Nuclear Information System (INIS)

    Oliveira, L.F.S. de; Hesles, J.B.S.; Milidiu, R.L.; Maciel, C.C.; Gibelli, S.M.O.; Oliveira, L.C.; Fleming, P.V.; Rivera, R.R.J.

    1981-02-01

    The probabilistic Safety Analysis Group from COPPE was founded in 1980. This first part of the report shows the theoretical fundaments used for reliability analysis of some safety systems for Angra-1 [pt

  10. SPECIALIZED MAPPING OF CRUSTAL FAULT ZONES. PART 1: BASIC THEORETICAL CONCEPTS AND PRINCIPLES

    Directory of Open Access Journals (Sweden)

    K. Zh. Seminsky

    2014-01-01

    Full Text Available Long-term studies of shear zones have included collection of data on fractures showing no indication of displacement which are termed as 'blank' fractures. A method aimed at mapping fault structures and stress fields has been developed on the basis of results of paragenetic analysis of measurements of abundant fractures. The method is termed as 'specialized mapping', firstly, due to its specific structural goal so that to distinguish it from the conventional geological mapping of regions in nature, and, secondly, because of the specific procedure applied to refer to fractures as references to decipher fault-block patterns of natural regions. In Part 1, basic theoretical concepts and principles of specialized mapping are described. Part 2 is being prepared for publication in one of the next issues of the journal; it will cover stages of the proposed method and describe some of the cases of its application.In terms of general organizational principles, specialized mapping is similar to other methods based on structural paragenetic analysis and differs from such methods in types of paragenesises viewed as references to reveal crustal fault zones. Such paragenesises result from stage-by-stage faulting (Fig 2 and Fig. 7 during which stress fields of the 2nd order are regularly changeable within the shear zone. According to combined experimental and natural data, a complete paragenesis of fractures in the shear zone includes a major (1st order fault plane and fractures of other seven types, R, R’, n, n’, t, t’ and T (2nd order (Fig. 4 and Fig 8. At the fracture level, each of them corresponds to a paragenesis including three nearly perpendicular systems of early ruptures (Fig. 1, which are based on two classical patterns of conjugated fractures, one of which is consistent with the position of the fault plane (Fig. 3. Taking into account that strike-slip, reverse and normal faults are similar in terms of mechanics (i.e. they are formed due to

  11. Theoretical Calculation of Absolute Radii of Atoms and Ions. Part 1. The Atomic Radii

    Directory of Open Access Journals (Sweden)

    Raka Biswas

    2002-02-01

    Full Text Available Abstract. A set of theoretical atomic radii corresponding to the principal maximum in the radial distribution function, 4πr2R2 for the outermost orbital has been calculated for the ground state of 103 elements of the periodic table using Slater orbitals. The set of theoretical radii are found to reproduce the periodic law and the Lother Meyer’s atomic volume curve and reproduce the expected vertical and horizontal trend of variation in atomic size in the periodic table. The d-block and f-block contractions are distinct in the calculated sizes. The computed sizes qualitatively correlate with the absolute size dependent properties like ionization potentials and electronegativity of elements. The radii are used to calculate a number of size dependent periodic physical properties of isolated atoms viz., the diamagnetic part of the atomic susceptibility, atomic polarizability and the chemical hardness. The calculated global hardness and atomic polarizability of a number of atoms are found to be close to the available experimental values and the profiles of the physical properties computed in terms of the theoretical atomic radii exhibit their inherent periodicity. A simple method of computing the absolute size of atoms has been explored and a large body of known material has been brought together to reveal how many different properties correlate with atomic size.

  12. Theoretical Physics 1. Theoretical Mechanics

    International Nuclear Information System (INIS)

    Dreizler, Reiner M.; Luedde, Cora S.

    2010-01-01

    After an introduction to basic concepts of mechanics more advanced topics build the major part of this book. Interspersed is a discussion of selected problems of motion. This is followed by a concise treatment of the Lagrangian and the Hamiltonian formulation of mechanics, as well as a brief excursion on chaotic motion. The last chapter deals with applications of the Lagrangian formulation to specific systems (coupled oscillators, rotating coordinate systems, rigid bodies). The level of this textbook is advanced undergraduate. The authors combine teaching experience of more than 40 years in all fields of Theoretical Physics and related mathematical disciplines and thorough knowledge in creating advanced eLearning content. The text is accompanied by an extensive collection of online material, in which the possibilities of the electronic medium are fully exploited, e.g. in the form of applets, 2D- and 3D-animations. (orig.)

  13. Theoretical Physics 1. Theoretical Mechanics

    Energy Technology Data Exchange (ETDEWEB)

    Dreizler, Reiner M.; Luedde, Cora S. [Frankfurt Univ. (Germany). Inst. fuer Theoretische Physik

    2010-07-01

    After an introduction to basic concepts of mechanics more advanced topics build the major part of this book. Interspersed is a discussion of selected problems of motion. This is followed by a concise treatment of the Lagrangian and the Hamiltonian formulation of mechanics, as well as a brief excursion on chaotic motion. The last chapter deals with applications of the Lagrangian formulation to specific systems (coupled oscillators, rotating coordinate systems, rigid bodies). The level of this textbook is advanced undergraduate. The authors combine teaching experience of more than 40 years in all fields of Theoretical Physics and related mathematical disciplines and thorough knowledge in creating advanced eLearning content. The text is accompanied by an extensive collection of online material, in which the possibilities of the electronic medium are fully exploited, e.g. in the form of applets, 2D- and 3D-animations. (orig.)

  14. Theoretical Mechanics Theoretical Physics 1

    CERN Document Server

    Dreizler, Reiner M

    2011-01-01

    After an introduction to basic concepts of mechanics more advanced topics build the major part of this book. Interspersed is a discussion of selected problems of motion. This is followed by a concise treatment of the Lagrangian and the Hamiltonian formulation of mechanics, as well as a brief excursion on chaotic motion. The last chapter deals with applications of the Lagrangian formulation to specific systems (coupled oscillators, rotating coordinate systems, rigid bodies). The level of this textbook is advanced undergraduate. The authors combine teaching experience of more than 40 years in all fields of Theoretical Physics and related mathematical disciplines and thorough knowledge in creating advanced eLearning content. The text is accompanied by an extensive collection of online material, in which the possibilities of the electronic medium are fully exploited, e.g. in the form of applets, 2D- and 3D-animations. - A collection of 74 problems with detailed step-by-step guidance towards the solutions. - A col...

  15. Simulation of the hot flow behaviour of a medium carbon microalloyed steel. Part 1. Theoretical approach

    International Nuclear Information System (INIS)

    Cabrera, J.M.; Prado, J.M.

    1997-01-01

    The constitutive equations to model the hot flow behaviour of metallic materials in general, and of microalloyed steels in particular (see part 2 of this work) are established in this work. Special emphasis is done on the dynamic softening mechanisms, i.e., dynamic recovery and recrystallization phenomena. The equations developed are physic-based, not empirical, and the modelling allows an easy implementation in an analysis by numerical methods. The resulting equations are even able to predict the final grain size. (Author) 39 refs

  16. Time Analysis of Building Dynamic Response Under Seismic Action. Part 1: Theoretical Propositions

    Science.gov (United States)

    Ufimtcev, E. M.

    2017-11-01

    The first part of the article presents the main provisions of the analytical approach - the time analysis method (TAM) developed for the calculation of the elastic dynamic response of rod structures as discrete dissipative systems (DDS) and based on the investigation of the characteristic matrix quadratic equation. The assumptions adopted in the construction of the mathematical model of structural oscillations as well as the features of seismic forces’ calculating and recording based on the data of earthquake accelerograms are given. A system to resolve equations is given to determine the nodal (kinematic and force) response parameters as well as the stress-strain state (SSS) parameters of the system’s rods.

  17. Postseismic viscoelastic surface deformation and stress. Part 1: Theoretical considerations, displacement and strain calculations

    Science.gov (United States)

    Cohen, S. C.

    1979-01-01

    A model of viscoelastic deformations associated with earthquakes is presented. A strike-slip fault is represented by a rectangular dislocation in a viscoelastic layer (lithosphere) lying over a viscoelastic half-space (asthenosphere). Deformations occur on three time scales. The initial response is governed by the instantaneous elastic properties of the earth. A slower response is associated with viscoelastic relaxation of the lithosphere and a yet slower response is due to viscoelastic relaxation of the asthenosphere. The major conceptual contribution is the inclusion of lithospheric viscoelastic properties into a dislocation model of earthquake related deformations and stresses. Numerical calculations using typical fault parameters reveal that the postseismic displacements and strains are small compared to the coseismic ones near the fault, but become significant further away. Moreover, the directional sense of the deformations attributable to the elastic response, the lithospheric viscoelastic softening, and the asthenospheric viscoelastic flow may differ and depend on location and model details. The results and theoretical arguments suggest that the stress changes accompanying lithospheric relaxation may also be in a different sense than and be larger than the strain changes.

  18. WIPP Compliance Certification Application calculations parameters. Part 1: Parameter development

    International Nuclear Information System (INIS)

    Howarth, S.M.

    1997-01-01

    The Waste Isolation Pilot Plant (WIPP) in southeast New Mexico has been studied as a transuranic waste repository for the past 23 years. During this time, an extensive site characterization, design, construction, and experimental program was completed, which provided in-depth understanding of the dominant processes that are most likely to influence the containment of radionuclides for 10,000 years. Nearly 1,500 parameters were developed using information gathered from this program; the parameters were input to numerical models for WIPP Compliance Certification Application (CCA) Performance Assessment (PA) calculations. The CCA probabilistic codes frequently require input values that define a statistical distribution for each parameter. Developing parameter distributions begins with the assignment of an appropriate distribution type, which is dependent on the type, magnitude, and volume of data or information available. The development of the parameter distribution values may require interpretation or statistical analysis of raw data, combining raw data with literature values, scaling of lab or field data to fit code grid mesh sizes, or other transformation. Parameter development and documentation of the development process were very complicated, especially for those parameters based on empirical data; they required the integration of information from Sandia National Laboratories (SNL) code sponsors, parameter task leaders (PTLs), performance assessment analysts (PAAs), and experimental principal investigators (PIs). This paper, Part 1 of two parts, contains a discussion of the parameter development process, roles and responsibilities, and lessons learned. Part 2 will discuss parameter documentation, traceability and retrievability, and lessons learned from related audits and reviews

  19. An algorithm for hyperspectral remote sensing of aerosols: 1. Development of theoretical framework

    International Nuclear Information System (INIS)

    Hou, Weizhen; Wang, Jun; Xu, Xiaoguang; Reid, Jeffrey S.; Han, Dong

    2016-01-01

    This paper describes the first part of a series of investigations to develop algorithms for simultaneous retrieval of aerosol parameters and surface reflectance from a newly developed hyperspectral instrument, the GEOstationary Trace gas and Aerosol Sensor Optimization (GEO-TASO), by taking full advantage of available hyperspectral measurement information in the visible bands. We describe the theoretical framework of an inversion algorithm for the hyperspectral remote sensing of the aerosol optical properties, in which major principal components (PCs) for surface reflectance is assumed known, and the spectrally dependent aerosol refractive indices are assumed to follow a power-law approximation with four unknown parameters (two for real and two for imaginary part of refractive index). New capabilities for computing the Jacobians of four Stokes parameters of reflected solar radiation at the top of the atmosphere with respect to these unknown aerosol parameters and the weighting coefficients for each PC of surface reflectance are added into the UNified Linearized Vector Radiative Transfer Model (UNL-VRTM), which in turn facilitates the optimization in the inversion process. Theoretical derivations of the formulas for these new capabilities are provided, and the analytical solutions of Jacobians are validated against the finite-difference calculations with relative error less than 0.2%. Finally, self-consistency check of the inversion algorithm is conducted for the idealized green-vegetation and rangeland surfaces that were spectrally characterized by the U.S. Geological Survey digital spectral library. It shows that the first six PCs can yield the reconstruction of spectral surface reflectance with errors less than 1%. Assuming that aerosol properties can be accurately characterized, the inversion yields a retrieval of hyperspectral surface reflectance with an uncertainty of 2% (and root-mean-square error of less than 0.003), which suggests self-consistency in the

  20. Developing a theoretical maintenance model for disordered eating in Type 1 diabetes.

    Science.gov (United States)

    Treasure, J; Kan, C; Stephenson, L; Warren, E; Smith, E; Heller, S; Ismail, K

    2015-12-01

    According to the literature, eating disorders are an increasing problem for more than a quarter of people with Type 1 diabetes and they are associated with accentuated diabetic complications. The clinical outcomes in this group when given standard eating disorder treatments are disappointing. The Medical Research Council guidelines for developing complex interventions suggest that the first step is to develop a theoretical model. To review existing literature to build a theoretical maintenance model for disordered eating in people with Type 1 diabetes. The literature in diabetes relating to models of eating disorder (Fairburn's transdiagnostic model and the dual pathway model) and food addiction was examined and assimilated. The elements common to all eating disorder models include weight/shape concern and problems with mood regulation. The predisposing traits of perfectionism, low self-esteem and low body esteem and the interpersonal difficulties from the transdiagnostic model are also relevant to diabetes. The differences include the use of insulin mismanagement to compensate for breaking eating rules and the consequential wide variations in plasma glucose that may predispose to 'food addiction'. Eating disorder symptoms elicit emotionally driven reactions and behaviours from others close to the individual affected and these are accentuated in the context of diabetes. The next stage is to test the assumptions within the maintenance model with experimental medicine studies to facilitate the development of new technologies aimed at increasing inhibitory processes and moderating environmental triggers. © 2015 The Authors. Diabetic Medicine © 2015 Diabetes UK.

  1. [Health, environment and nursing. Philosophical and theoretical foundations for the development and validation of a nursing interface terminology. Part III].

    Science.gov (United States)

    Juvé-Udina, Maria-Eulàlia

    2012-06-01

    This manuscript is the third of a triad of papers introducing the philosophical and theoretical approaches that support the development and validation of a nursing interface terminology as a standard vocabulary designed to ease data entry into electronic health records, to produce information and to generate knowledge. To analyze the philosophical and theoretical approaches considered in the development of a new nursing interface terminology called ATIC. Review, analysis and discussion of the main philosophical orientations, high and mid-range theories and nursing scientific literature to develop an interpretative conceptualization of the metaparadigm concepts "Health", "Environment" and "Nursing". In the 2 previous papers the ATIC terminology, its foundation on pragmatism, holism, post-positivism and constructivism and the construction of the meaning for the concept elndividualh is discussed. In this third paper, Health is conceptualized as a multidimensional balance state and the concepts of Partial health status, Disease and Being ill are explored within. The analysis of the Environment theories drives its conceptualization as a group of variables that has the potential to affect health status. In this orientation, Nursing is understood as the scientific discipline focused on the study of health status in the particular environment and experience of the individuals, groups, communities or societies. ATIC terminology is rooted on an eclectic philosophical and theoretical foundation, allowing it to be used from different trends within the totality paradigm.

  2. Theoretical developments in SUSY

    International Nuclear Information System (INIS)

    Shifman, M.

    2009-01-01

    I am proud that I was personally acquainted with Julius Wess. We first met in 1999 when I was working on the Yuri Golfand Memorial Volume (The Many Faces of the Superworld, World Scientific, Singapore, 2000). I invited him to contribute, and he accepted this invitation with enthusiasm. After that, we met many times, mostly at various conferences in Germany and elsewhere. I was lucky to discuss with Julius questions of theoretical physics, and hear his recollections on how supersymmetry was born. In physics Julius was a visionary, who paved the way to generations of followers. In everyday life he was a kind and modest person, always ready to extend a helping hand to people who were in need of his help. I remember him telling me how concerned he was about the fate of theoretical physicists in Eastern Europe after the demise of communism. His ties with Israeli physicists bore a special character. I am honored by the opportunity to contribute an article to the Julius Wess Memorial Volume. I review theoretical developments of the recent years in non-perturbative supersymmetry. (orig.)

  3. Theoretical developments in SUSY

    Energy Technology Data Exchange (ETDEWEB)

    Shifman, M. [University of Minnesota, William I. Fine Theoretical Physics Institute, Minneapolis, MN (United States)

    2009-01-15

    I am proud that I was personally acquainted with Julius Wess. We first met in 1999 when I was working on the Yuri Golfand Memorial Volume (The Many Faces of the Superworld, World Scientific, Singapore, 2000). I invited him to contribute, and he accepted this invitation with enthusiasm. After that, we met many times, mostly at various conferences in Germany and elsewhere. I was lucky to discuss with Julius questions of theoretical physics, and hear his recollections on how supersymmetry was born. In physics Julius was a visionary, who paved the way to generations of followers. In everyday life he was a kind and modest person, always ready to extend a helping hand to people who were in need of his help. I remember him telling me how concerned he was about the fate of theoretical physicists in Eastern Europe after the demise of communism. His ties with Israeli physicists bore a special character. I am honored by the opportunity to contribute an article to the Julius Wess Memorial Volume. I review theoretical developments of the recent years in non-perturbative supersymmetry. (orig.)

  4. Theoretical Developments in SUSY

    Science.gov (United States)

    Shifman, M.

    2009-01-01

    I am proud that I was personally acquainted with Julius Wess. We first met in 1999 when I was working on the Yuri Golfand Memorial Volume (The Many Faces of the Superworld, World Scientific, Singapore, 2000). I invited him to contribute, and he accepted this invitation with enthusiasm. After that, we met many times, mostly at various conferences in Germany and elsewhere. I was lucky to discuss with Julius questions of theoretical physics, and hear his recollections on how supersymmetry was born. In physics Julius was a visionary, who paved the way to generations of followers. In everyday life he was a kind and modest person, always ready to extend a helping hand to people who were in need of his help. I remember him telling me how concerned he was about the fate of theoretical physicists in Eastern Europe after the demise of communism. His ties with Israeli physicists bore a special character. I am honored by the opportunity to contribute an article to the Julius Wess Memorial Volume. I will review theoretical developments of the recent years in non-perturbative supersymmetry.

  5. Ada Integrated Environment II Computer Program Development Specification. Part 1.

    Science.gov (United States)

    1981-12-01

    34Programmable" access 3.2.5.5 controls ; provision for privileged 3.2.5.6 user. 3.3.1 3.3.3 4.1.2.11 3.7.1.2 KDBS - 3.2.5.7 Capability to archive data base...CM -1 1 PHASE I SOW REQUIREMENTS A - SPEC B5 -SPEC 4.111. 3.7.2 1Compiler -331 aMAPSE shall include a mechanism for 1 Linker -3.2.5 aautomatic stub...19 3.2.5.5 Process Administrator The Process Administrator controls the executions of logically concurrent MAPSE processes. The KFW Interface Package

  6. Development of methods for theoretical analysis of nuclear reactors (Phase II), I-V, Part IV, Fuel depletion

    International Nuclear Information System (INIS)

    Pop-Jordanov, J.

    1962-10-01

    This report includes the analysis of plutonium isotopes from U 238 depletion chain. Two theoretical approaches for solving the depletion of fuel are shown. One results in the system of differential equations that can be solved only by using electronic calculators and the second, Machinari-Goto method enables obtaining analytical equations for approximative values of particular nuclei. In addition, differential equations are given for different approximation levels in calculating Pu 239 , as well as relations between the released energy and irradiation [sr

  7. The fractional scaling methodology (FSM) Part 1. methodology development

    International Nuclear Information System (INIS)

    Novak Zuber; Ivan Catton; Upendra S Rohatgi; Wolfgang Wulff

    2005-01-01

    Full text of publication follows: a quantitative methodology is developed, based on the concepts of hierarchy and synthesis, to integrate and organize information and data. The methodology uses scaling to synthesize experimental data and analytical results, and to provide quantitative criteria for evaluating the effects of various design and operating parameters that influence processes in a complex system such as a nuclear power plant or a related test facility. Synthesis and scaling are performed on three hierarchical levels: the process, component and system levels. Scaling on the process level determines the effect of a selected process on a particular state variable during a selected scenario. At the component level this scaling determines the effects various processes have on a state variable, and it ranks the processes according to their importance by the magnitude of the fractional change they cause on that state variable. At the system level the scaling determines the governing processes and corresponding components, ranking these in the order of importance according to their effect on the fractional change of system-wide state variables. The scaling methodology reveals on all levels the fractional change of state variables and is called therefore the Fractional Scaling Methodology (FSM). FSM synthesizes process parameters and assigns to each thermohydraulic process a dimensionless effect metric Ω = ωt, that is the product of the specific rate of fractional change ω and the characteristic time t. The rate of fractional change ω is the ratio of process transport rate over content of a preserved quantity in a component. The effect metric Ω quantifies the contribution of the process to the fractional change of a state variable in a given component. Ordering of a component effect metrics provides the hierarchy of processes in a component, then in all components and the system. FSM separates quantitatively dominant from minor processes and components and

  8. Part 1: characterization of beam synthesized catalytic materials. Part 2: further development of molecular SIMS

    International Nuclear Information System (INIS)

    Scheifers, S.M.

    1985-01-01

    Part I of this thesis concerns characterization of catalyst materials prepared by an ion beam implanter and by a multiple expansion cluster source. Ion beam synthesis was carried out on a 250-kev ion implanter. After assembling a special reaction chamber, zeolites were implanted with phosphorous and iron. This work contributed to development of a sputter reactor for ion beam synthesis. Silver catalysts were examined in a reactor designed, built and evaluated for catalysts produced by the sputter reactor and by a multiple expansion cluster source. Small surface area silver foil catalysts and silver cluster catalysts showed kinetic activity for epoxidation of ethylene. Positive results for the small surface area silver cluster catalyst demonstrate the feasibility of studying these catalysts with the special reactor. Part 2 concerns fundamentals and applications of secondary ion mass spectrometry. A data system was implemented for a secondary ion mass spectrometer that involved design and construction of a computer interface. Software routines for the interface were written in assembly language for increased operation efficiency

  9. Dealing with grief related to loss by death and chronic pain: An integrated theoretical framework. Part 1

    Directory of Open Access Journals (Sweden)

    Bodil Furnes

    2010-05-01

    Full Text Available Bodil Furnes, Elin DysvikUniversity of Stavanger, Faculty of Social Sciences, Department of Health Studies, Stavanger, NorwayObjective: Based on the present authors’ research and several approaches to grief related to loss by death and nonmalignant chronic pain, the paper suggests a new integrated theoretical framework for intervention in clinical settings.Methods: An open qualitative review of the literature on grief theories was performed searching for a new integrated approach in the phenomenological tradition. We then investigated the relationship between grief, loss and chronic nonmalignant pain, looking for main themes and connections and how these could be best understood in a more holistic manner.Results: Two main themes were formulated, “relearning the world” and “adaptation”. Between these themes a continuous movement emerged involving experience such as: “despair and hope”, “lack of understanding and insight”, “meaning disruption and increased meaning”, and “bodily discomfort and reintegrated body”. These were identified as paired subthemes.Conclusions: Grief as a distinctive experience means that health care must be aimed at each individual experience and situation. Grief experience and working with grief are considered in terms of relearning the world while walking backwards and living forwards, as described in our integrated model. We consider that this theoretical framework regarding grief should offer an integrated foundation for health care workers who are working with people experiencing grief caused by death or chronic pain.Keywords: health care, loss, grief

  10. CONVEC: a computer program for transient incompressible fluid flow based on quadratic finite elements. Part 1: theoretical aspects

    International Nuclear Information System (INIS)

    Laval, H.

    1981-01-01

    This report describes the theoretical and numerical aspects of the finite element computer code CONVEC designed for the transient analysis of two-dimensional plane or three-dimensional axisymmetric incompressible flows including the effects of heat transfer. The governing equations for the above class of problems are the time-dependent incompressible Navier-Stokes equations and the thermal energy equation. The general class of flow problems analysed by CONVEC is discussed and the equations for the initial-boundary value problem are represented. A brief description of the finite element method and the weighted residual formulation is presented. The numerical solution of the incompressible equations is achieved by using a fractional step method. The mass lumping process associated with an explicit time integration scheme is described. The time integration is analysed and the stability conditions are derived. Numerical applications are presented. Standard problems of natural and forced convection are solved and the solutions obtained are compared with other numerical solutions published in the literature

  11. Application of processing maps in the optimization of the parameters of a hot working process. Part 1. Theoretical review

    International Nuclear Information System (INIS)

    Al Omar, A.; Prado, J.M.

    1997-01-01

    The hot working processes constitute an important step in the manufacture of components for engineering applications. In the past, the mechanical processing have been used to impart a shape to the engineering materials. More recently, however, the hot working processes are used not only to achieve the required shape but also to impart desirable mechanical and microstructural characteristics by an adequate design of the thermomechanical process. The aim of the present paper is to summarize the general characteristics of the Dynamic Materials Model. In this model, the work piece material under hot working conditions is considered to be a dissipator of power. Also, the extreme principles of irreversible thermodynamics applied to large plastic flow are described to develop a continuum criterion capable to predict the metallurgical instabilities in a hot worked material. (Author) 22 refs

  12. Transformation of Adolescent Peer Relations in the Social Media Context: Part 1-A Theoretical Framework and Application to Dyadic Peer Relationships.

    Science.gov (United States)

    Nesi, Jacqueline; Choukas-Bradley, Sophia; Prinstein, Mitchell J

    2018-04-07

    Investigators have long recognized that adolescents' peer experiences provide a crucial context for the acquisition of developmental competencies, as well as potential risks for a range of adjustment difficulties. However, recent years have seen an exponential increase in adolescents' adoption of social media tools, fundamentally reshaping the landscape of adolescent peer interactions. Although research has begun to examine social media use among adolescents, researchers have lacked a unifying framework for understanding the impact of social media on adolescents' peer experiences. This paper represents Part 1 of a two-part theoretical review, in which we offer a transformation framework to integrate interdisciplinary social media scholarship and guide future work on social media use and peer relations from a theory-driven perspective. We draw on prior conceptualizations of social media as a distinct interpersonal context and apply this understanding to adolescents' peer experiences, outlining features of social media with particular relevance to adolescent peer relations. We argue that social media transforms adolescent peer relationships in five key ways: by changing the frequency or immediacy of experiences, amplifying experiences and demands, altering the qualitative nature of interactions, facilitating new opportunities for compensatory behaviors, and creating entirely novel behaviors. We offer an illustration of the transformation framework applied to adolescents' dyadic friendship processes (i.e., experiences typically occurring between two individuals), reviewing existing evidence and offering theoretical implications. Overall, the transformation framework represents a departure from the prevailing approaches of prior peer relations work and a new model for understanding peer relations in the social media context.

  13. Microbial processes in the final repository, the silo part. Theoretical approach and preliminary experiments on the biodegradation of bitumen. Part 1

    International Nuclear Information System (INIS)

    Roffey, R.; Hjalmarsson, K.

    1984-01-01

    On Commission of SKBF/KBS the microbial processes that are likely to occur in the silo part of SFR, the final repository for medium- and low-level nuclear wastes, have been put together. The experimental studies concerning microbial degradation of bitumen are described. From a microbial point of view it is the biodegradation of bitumen that constitutes the greatest risk in the silo part of SFR. The degradation, aerobic as well as anaerobic, leads to production of carbon dioxide which might cause a decrease in pH to such an extent that hydrogen-gas producing corrosion of metal could occur. This production of gas can cause an increase in internal pressure of the repository. A culture of bacteria able to degrade bitumen aerobically has been enriched. Uptil now no culture degrading bitumen under anaerobic conditions have been obtained. When making a risk assessment of the SFR at the present time it is not possible to completely disregard the microbial activity. An account is also given for some international contacts in this area. 11 references

  14. Elements of a flexible approach for conceptual hydrological modeling : 1. Motivation and theoretical development

    NARCIS (Netherlands)

    Fenicia, F.; Kavetski, D.; Savenije, H.H.G.

    2011-01-01

    This paper introduces a flexible framework for conceptual hydrological modeling, with two related objectives: (1) generalize and systematize the currently fragmented field of conceptual models and (2) provide a robust platform for understanding and modeling hydrological systems. In contrast to

  15. Theoretical physics 1 classical mechanics

    CERN Document Server

    Nolting, Wolfgang

    2016-01-01

    This textbook offers a clear and comprehensive introduction to classical mechanics, one of the core components of undergraduate physics courses. The book starts with a thorough introduction to the mathematical tools needed, to make this textbook self-contained for learning. The second part of the book introduces the mechanics of the free mass point and details conservation principles. The third part expands the previous to mechanics of many particle systems. Finally the mechanics of the rigid body is illustrated with rotational forces, inertia and gyroscope movement. Ideally suited to undergraduate students in their first year, the book is enhanced throughout with learning features such as boxed inserts and chapter summaries, with key mathematical derivations highlighted to aid understanding. The text is supported by numerous worked examples and end of chapter problem sets. About the Theoretical Physics series Translated from the renowned and highly successful German editions, the eight volumes of this series...

  16. Optimal Learning in Schools--Theoretical Evidence: Part 4 Metacognition

    Science.gov (United States)

    Crossland, John

    2017-01-01

    Parts 1 and 2 in this four-part series of articles (Crossland, 2016, 2017a) discussed the recent research from neuroscience linked to concepts from cognitive development that brought Piaget's theories into the 21st century and showed the most effective provision towards more optimal learning strategies. Part 2 reviewed Demetriou's latest thinking…

  17. Long-term athletic development- part 1: a pathway for all youth.

    Science.gov (United States)

    Lloyd, Rhodri S; Oliver, Jon L; Faigenbaum, Avery D; Howard, Rick; De Ste Croix, Mark B A; Williams, Craig A; Best, Thomas M; Alvar, Brent A; Micheli, Lyle J; Thomas, D Phillip; Hatfield, Disa L; Cronin, John B; Myer, Gregory D

    2015-05-01

    The concept of developing talent and athleticism in youth is the goal of many coaches and sports systems. Consequently, an increasing number of sporting organizations have adopted long-term athletic development models in an attempt to provide a structured approach to the training of youth. It is clear that maximizing sporting talent is an important goal of long-term athletic development models. However, ensuring that youth of all ages and abilities are provided with a strategic plan for the development of their health and physical fitness is also important to maximize physical activity participation rates, reduce the risk of sport- and activity-related injury, and to ensure long-term health and well-being. Critical reviews of independent models of long-term athletic development are already present within the literature; however, to the best of our knowledge, a comprehensive examination and review of the most prominent models does not exist. Additionally, considerations of modern day issues that may impact on the success of any long-term athletic development model are lacking, as are proposed solutions to address such issues. Therefore, within this 2-part commentary, Part 1 provides a critical review of existing models of practice for long-term athletic development and introduces a composite youth development model that includes the integration of talent, psychosocial and physical development across maturation. Part 2 identifies limiting factors that may restrict the success of such models and offers potential solutions.

  18. Assistance in MSD Research and Development: Part 1, Small scale research, development and testing: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Worsey, P.N.; Canon, C.

    1988-03-01

    The development and testing of a simple mechanical stemming aid is described. The aid comprises a solid unit placed in the stemming above the explosive column and is designed to improve blasting efficiency and reduce drilling and blasting costs. It is designed to work with back filled drill cuttings or any other suitable stemming material. To date it has consisted of the testing of the aid in small diameter (1.5 and 1.625 inch) holes in Jefferson City Dolomite for both bench and crater blasting configurations. Full scale field trials are being conducted nearby in similar rock in an aggregate quarry. The data acquisition equipment used in Phase 1 included both a Spin Physics SP2000 high speed video motion analysis system and acoustic and seismic monitoring units. Measurements for each test included peak air over pressure, ground surface ppv, stemming displacement and velocity and face movement and extent. The results illustrate that the concept is sound and that its successful application to production blasting at full scale will be a function of manufacturing cost, the development of suitable insertion techniques for large diameter boreholes and the selection of a suitable low cost material for the aid. 17 refs., 20 figs.

  19. Investigation of an experimental ejector refrigeration machine operating with refrigerant R245fa at design and off-design working conditions. Part 1. Theoretical analysis

    KAUST Repository

    Shestopalov, K.O.

    2015-07-01

    © 2015 Elsevier Ltd and IIR.All rights reserved. The ejector refrigeration machine (ERM) offers several advantages over other heat-driven refrigeration machine, including simplicity in design and operation, high reliability and low installation cost, which enable its wide application in the production of cooling. In this paper the theoretical analysis of ejector design and ejector refrigeration cycle performance is presented. It is shown that ERM performance characteristics depend strongly on the operating conditions, the efficiency of the ejector used, and the thermodynamic properties of the refrigerant used. A 1-D model for the prediction of the entrainment ratio ω, and an optimal design for ejectors with cylindrical and conical-cylindrical mixing chambers are presented in this paper. In order to increase ERM performance values, it is necessary first of all to improve the performance of the ejector.

  20. A HACCP-based approach to mastitis control in dairy herds. Part 1: Development

    Directory of Open Access Journals (Sweden)

    Beekhuis-Gibbon Lies

    2011-03-01

    Full Text Available Abstract Hazard Analysis and Critical Control Points (HACCP systems are a risk based preventive approach developed to increase levels of food safety assurance. This is part 1 of a pilot study on the development, implementation and evaluation of a HACCP-based approach for the control of good udder health in dairy cows. The paper describes the use of a novel approach based on a deconstruction of the infectious process in mastitis to identify Critical Control Points (CCPs and develop a HACCP-based system to prevent and control mastitis in dairy herds. The approach involved the creation of an Infectious Process Flow Diagram, which was then cross-referenced to two production process flow diagrams of the milking process and cow management cycle. The HACCP plan developed, may be suitable for customisation and implementation on dairy farms. This is a logical, systematic approach to the development of a mastitis control programme that could be used as a template for the development of control programmes for other infectious diseases in the dairy herd.

  1. A HACCP-based approach to mastitis control in dairy herds. Part 1: Development.

    Science.gov (United States)

    Beekhuis-Gibbon, Lies; Whyte, Paul; O'Grady, Luke; More, Simon J; Doherty, Michael L

    2011-03-31

    Hazard Analysis and Critical Control Points (HACCP) systems are a risk based preventive approach developed to increase levels of food safety assurance. This is part 1 of a pilot study on the development, implementation and evaluation of a HACCP-based approach for the control of good udder health in dairy cows. The paper describes the use of a novel approach based on a deconstruction of the infectious process in mastitis to identify Critical Control Points (CCPs) and develop a HACCP-based system to prevent and control mastitis in dairy herds. The approach involved the creation of an Infectious Process Flow Diagram, which was then cross-referenced to two production process flow diagrams of the milking process and cow management cycle. The HACCP plan developed, may be suitable for customisation and implementation on dairy farms. This is a logical, systematic approach to the development of a mastitis control programme that could be used as a template for the development of control programmes for other infectious diseases in the dairy herd.

  2. Shunt resistance and saturation current determination in CdTe and CIGS solar cells. Part 1: a new theoretical procedure and comparison with other methodologies

    Science.gov (United States)

    Rangel-Kuoppa, Victor-Tapio; Albor-Aguilera, María-de-Lourdes; Hérnandez-Vásquez, César; Flores-Márquez, José-Manuel; González-Trujillo, Miguel-Ángel; Contreras-Puente, Gerardo-Silverio

    2018-04-01

    A new proposal for the extraction of the shunt resistance (R sh ) and saturation current (I sat ) of a current-voltage (I-V) measurement of a solar cell, within the one-diode model, is given. First, the Cheung method is extended to obtain the series resistance (R s ), the ideality factor (n) and an upper limit for I sat . In this article which is Part 1 of two parts, two procedures are proposed to obtain fitting values for R sh and I sat within some voltage range. These two procedures are used in two simulated I-V curves (one in darkness and the other one under illumination) to recover the known solar cell parameters R sh , R s , n, I sat and the light current I lig and test its accuracy. The method is compared with two different common parameter extraction methods. These three procedures are used and compared in Part 2 in the I-V curves of CdS-CdTe and CIGS-CdS solar cells.

  3. Investigation of an experimental ejector refrigeration machine operating with refrigerant R245fa at design and off-design working conditions. Part 1. Theoretical analysis

    KAUST Repository

    Shestopalov, K.O.; Huang, B.J.; Petrenko, V.O.; Volovyk, O.S.

    2015-01-01

    , which enable its wide application in the production of cooling. In this paper the theoretical analysis of ejector design and ejector refrigeration cycle performance is presented. It is shown that ERM performance characteristics depend strongly

  4. Developing maximal neuromuscular power: Part 1--biological basis of maximal power production.

    Science.gov (United States)

    Cormie, Prue; McGuigan, Michael R; Newton, Robert U

    2011-01-01

    This series of reviews focuses on the most important neuromuscular function in many sport performances, the ability to generate maximal muscular power. Part 1 focuses on the factors that affect maximal power production, while part 2, which will follow in a forthcoming edition of Sports Medicine, explores the practical application of these findings by reviewing the scientific literature relevant to the development of training programmes that most effectively enhance maximal power production. The ability of the neuromuscular system to generate maximal power is affected by a range of interrelated factors. Maximal muscular power is defined and limited by the force-velocity relationship and affected by the length-tension relationship. The ability to generate maximal power is influenced by the type of muscle action involved and, in particular, the time available to develop force, storage and utilization of elastic energy, interactions of contractile and elastic elements, potentiation of contractile and elastic filaments as well as stretch reflexes. Furthermore, maximal power production is influenced by morphological factors including fibre type contribution to whole muscle area, muscle architectural features and tendon properties as well as neural factors including motor unit recruitment, firing frequency, synchronization and inter-muscular coordination. In addition, acute changes in the muscle environment (i.e. alterations resulting from fatigue, changes in hormone milieu and muscle temperature) impact the ability to generate maximal power. Resistance training has been shown to impact each of these neuromuscular factors in quite specific ways. Therefore, an understanding of the biological basis of maximal power production is essential for developing training programmes that effectively enhance maximal power production in the human.

  5. Intelligence: new findings and theoretical developments.

    Science.gov (United States)

    Nisbett, Richard E; Aronson, Joshua; Blair, Clancy; Dickens, William; Flynn, James; Halpern, Diane F; Turkheimer, Eric

    2012-01-01

    We review new findings and new theoretical developments in the field of intelligence. New findings include the following: (a) Heritability of IQ varies significantly by social class. (b) Almost no genetic polymorphisms have been discovered that are consistently associated with variation in IQ in the normal range. (c) Much has been learned about the biological underpinnings of intelligence. (d) "Crystallized" and "fluid" IQ are quite different aspects of intelligence at both the behavioral and biological levels. (e) The importance of the environment for IQ is established by the 12-point to 18-point increase in IQ when children are adopted from working-class to middle-class homes. (f) Even when improvements in IQ produced by the most effective early childhood interventions fail to persist, there can be very marked effects on academic achievement and life outcomes. (g) In most developed countries studied, gains on IQ tests have continued, and they are beginning in the developing world. (h) Sex differences in aspects of intelligence are due partly to identifiable biological factors and partly to socialization factors. (i) The IQ gap between Blacks and Whites has been reduced by 0.33 SD in recent years. We report theorizing concerning (a) the relationship between working memory and intelligence, (b) the apparent contradiction between strong heritability effects on IQ and strong secular effects on IQ, (c) whether a general intelligence factor could arise from initially largely independent cognitive skills, (d) the relation between self-regulation and cognitive skills, and (e) the effects of stress on intelligence.

  6. Twitter and Public Health (Part 1): How Individual Public Health Professionals Use Twitter for Professional Development.

    Science.gov (United States)

    Hart, Mark; Stetten, Nichole E; Islam, Sabrina; Pizarro, Katherine

    2017-09-20

    The use of social networking sites is increasingly being adopted in public health, in part, because of the barriers to funding and reduced resources. Public health professionals are using social media platforms, specifically Twitter, as a way to facilitate professional development. The objective of this study was to identify public health professionals using Twitter and to analyze how they use this platform to enhance their formal and informal professional development within the context of public health. Keyword searches were conducted to identify and invite potential participants to complete a survey related to their use of Twitter for public health and professional experiences. Data regarding demographic attributes, Twitter usage, and qualitative information were obtained through an anonymous Web-based survey. Open-response survey questions were analyzed using the constant comparison method. "Using Twitter makes it easier to expand my networking opportunities" and "I find Twitter useful for professional development" scored highest, with a mean score of 4.57 (standard deviation [SD] 0.74) and 4.43 (SD 0.76) on a 5-point Likert scale. Analysis of the qualitative data shows the emergence of the following themes for why public health professionals mostly use Twitter: (1) geography, (2) continuing education, (3) professional gain, and (4) communication. For public health professionals in this study, Twitter is a platform best used for their networking and professional development. Furthermore, the use of Twitter allows public health professionals to overcome a series of barriers and enhances opportunities for growth. ©Mark Hart, Nichole E Stetten, Sabrina Islam, Katherine Pizarro. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 20.09.2017.

  7. THEORETICAL ASPECTS OF INFORMATIONAL SERVICES REGIONAL MARKET EFFECTIVE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    I.N. Korabejnikov

    2008-12-01

    Full Text Available The peculiarities and priorities of the informational services regional market formation as a part of network model of the economic development are described in this article. The authors present the classification of the factors which have an influence on the effectiveness of the informational services regional market development. Theoretical aspects of the informational services regional market effective development are shown.

  8. Basic course in theoretical physics. Vol. 1

    International Nuclear Information System (INIS)

    Dietze, H.D.

    1973-01-01

    This book is the first volume of an edition of two volumes which concern theoretical physics. In this volume the mechanics of a point mass, electric and magnetic fields, and the mechanics of two point, masses, rig: 1 bodies, and deformable 50 lids are considered. This book is suited for students who want to get some fundamental knowledge of theoretical physics. (HSI)

  9. Formal Development of the HRP Prover - Part 1: Syntax and Semantics

    International Nuclear Information System (INIS)

    Sivertsen, Terje

    1996-01-01

    This report describes the formal development of a new version of the HRP Prover. The new version of the tool will have functionality almost identical to the current version, but is developed in accordance to established principles for applying algebraic specification in formal software development. The development project provides results of relevance to the formal development of a wide range of language-oriented tools, including programming language compilers, as well as to the automatic generation of code from specifications. Since the overall scope of this report is the analysis of algebraic specifications, emphasis is given to topics related to what is usually understood as the ''front end'' of compilers. This includes lexical and syntax analysis of the specifications, static semantics through type checking, and dynamic semantics through evaluation. All the different phases are specified in algebraic specification and supported by the current version of the HRP Prover. In subsequent work, the completed parts of the new version will complement the tool support in the development. The work presented will be followed up by formal specification of theorem proving and transformation, as well as code generation into conventional programming languages. The new version of the HRP Prover is incrementally developed in coherence with the specifications produced in these activities. At the same time, the development of the tool demonstrates the efficient use of the methodology through real application on an increasingly important class of software. (author)

  10. Theoretical and Experimental Flow Cell Studies of a Hydrogen-Bromine Fuel Cell, Part 1. M.S. Thesis. Final Report

    Science.gov (United States)

    Savinell, R. F.; Fritts, S. D.

    1986-01-01

    There is increasing interest in hydrogen-bromine fuel cells as both primary and regenerative energy storage systems. One promising design for a hydrogen-bromine fuel cell is a negative half cell having only a gas phase, which is separated by a cationic exchange membrane from a positive half cell having an aqueous electrolyte. The hydrogen gas and the aqueous bromide solution are stored external to the cell. In order to calculate the energy storage capacity and to predict and assess the performance of a single cell, the open circuit potential (OCV) must be estimated for different states of change, under various conditions. Theoretical expressions were derived to estimate the OCV of a hydrogen-bromine fuel cell. In these expressions temperature, hydrogen pressure, and bromine and hydrobromic acid concentrations were taken into consideration. Also included are the effects of the Nafion membrance separator and the various bromide complex species. Activity coefficients were taken into account in one of the expressions. The sensitivity of these parameters on the calculated OCV was studied.

  11. Promoting physical therapists’ of research evidence to inform clinical practice: part 1 - theoretical foundation, evidence, and description of the PEAK program

    Science.gov (United States)

    2014-01-01

    Background There is a need for theoretically grounded and evidence-based interventions that enhance the use of research evidence in physical therapist practice. This paper and its companion paper introduce the Physical therapist-driven Education for Actionable Knowledge translation (PEAK) program, an educational program designed to promote physical therapists’ integration of research evidence into clinical decision-making. The pedagogical foundations for the PEAK educational program include Albert Bandura’s social cognitive theory and Malcolm Knowles’s adult learning theory. Additionally, two complementary frameworks of knowledge translation, the Promoting Action on Research Implementation in Health Services (PARiHS) and Knowledge to Action (KTA) Cycle, were used to inform the organizational elements of the program. Finally, the program design was influenced by evidence from previous attempts to facilitate the use of research in practice at the individual and organizational levels. Discussion The 6-month PEAK program consisted of four consecutive and interdependent components. First, leadership support was secured and electronic resources were acquired and distributed to participants. Next, a two-day training workshop consisting of didactic and small group activities was conducted that addressed the five steps of evidence based practice. For five months following the workshop, participants worked in small groups to review and synthesize literature around a group-selected area of common clinical interest. Each group contributed to the generation of a “Best Practices List” - a list of locally generated, evidence-based, actionable behaviors relevant to the groups’ clinical practice. Ultimately, participants agreed to implement the Best Practices List in their clinical practice. Summary This, first of two companion papers, describes the underlying pedagogical theories, knowledge translation frameworks, and research evidence used to derive the PEAK program

  12. Promoting physical therapists' of research evidence to inform clinical practice: part 1--theoretical foundation, evidence, and description of the PEAK program.

    Science.gov (United States)

    Tilson, Julie K; Mickan, Sharon

    2014-06-25

    There is a need for theoretically grounded and evidence-based interventions that enhance the use of research evidence in physical therapist practice. This paper and its companion paper introduce the Physical therapist-driven Education for Actionable Knowledge translation (PEAK) program, an educational program designed to promote physical therapists' integration of research evidence into clinical decision-making. The pedagogical foundations for the PEAK educational program include Albert Bandura's social cognitive theory and Malcolm Knowles's adult learning theory. Additionally, two complementary frameworks of knowledge translation, the Promoting Action on Research Implementation in Health Services (PARiHS) and Knowledge to Action (KTA) Cycle, were used to inform the organizational elements of the program. Finally, the program design was influenced by evidence from previous attempts to facilitate the use of research in practice at the individual and organizational levels. The 6-month PEAK program consisted of four consecutive and interdependent components. First, leadership support was secured and electronic resources were acquired and distributed to participants. Next, a two-day training workshop consisting of didactic and small group activities was conducted that addressed the five steps of evidence based practice. For five months following the workshop, participants worked in small groups to review and synthesize literature around a group-selected area of common clinical interest. Each group contributed to the generation of a "Best Practices List" - a list of locally generated, evidence-based, actionable behaviors relevant to the groups' clinical practice. Ultimately, participants agreed to implement the Best Practices List in their clinical practice. This, first of two companion papers, describes the underlying pedagogical theories, knowledge translation frameworks, and research evidence used to derive the PEAK program - an educational program designed to

  13. MIRD methodology. Part 1

    International Nuclear Information System (INIS)

    Rojo, Ana M.

    2004-01-01

    This lecture develops the MIRD (Medical Internal Radiation Dose) methodology for the evaluation of the internal dose due to the administration of radiopharmaceuticals. In this first part, the basic concepts and the main equations are presented. The ICRP Dosimetric System is also explained. (author)

  14. Influence of injector technology on injection and combustion development - Part 1: Hydraulic characterization

    Energy Technology Data Exchange (ETDEWEB)

    Payri, R.; Salvador, F.J.; Gimeno, J.; Morena, J. de la [CMT-Motores Termicos, Universidad Politecnica de Valencia, Camino de Vera s/n, E-46022 (Spain)

    2011-04-15

    An experimental study of two real multi-hole Diesel injectors is performed under current DI Diesel engine operating conditions. The aim of the investigation is to study the influence of injector technology on the flow at the nozzle exit and to analyse its effect on the spray in evaporative conditions and combustion development. The injectors used are two of the most common technologies used nowadays: solenoid and piezoelectric. The nozzles for both injectors are very similar since the objective of the work is the understanding of the influence of the injector technology on spray characteristics for a given nozzle geometry. In the first part of the study, experimental measurements of hydraulic characterization have been analyzed for both systems. Analysis of spray behaviour in evaporative conditions and combustion development will be carried out in the second part of the work. Important differences between both injectors have been observed, especially in their transient opening and closing of the needle, leading to a more efficient air-fuel mixing and combustion processes for the piezoelectric actuated injector. (author)

  15. Determination of cognitive development: postnonclassical theoretical model

    Directory of Open Access Journals (Sweden)

    Irina N. Pogozhina

    2015-09-01

    Full Text Available The aim of this research is to develop a postnonclassical cognitive processes content determination model in which mental processes are considered as open selfdeveloping, self-organizing systems. Three types of systems (dynamic, statistical, developing were analysed and compared on the basis of the description of the external and internal characteristics of causation, types of causal chains (dependent, independent and their interactions, as well as the nature of the relationship between the elements of the system (hard, probabilistic, mixed. Mechanisms of open non-equilibrium nonlinear systems (dissipative and four dissipative structures emergence conditions are described. Determination models of mental and behaviour formation and development that were developed under various theoretical approaches (associationism, behaviorism, gestaltism, psychology of intelligence by Piaget, Vygotsky culture historical approach, activity approach and others are mapped on each other as the models that describe behaviour of the three system types mentioned above. The development models of the mental sphere are shown to be different by the following criteria: 1 allocated determinants amount; 2 presence or absence of the system own activity that results in selecting the model not only external, but also internal determinants; 3 types of causal chains (dependent-independent-blended; 4 types of relationships between the causal chain that ultimately determines the subsequent system determination type as decisive (a tough dynamic pattern or stochastic (statistical regularity. The continuity of postnonclassical, classical and non-classical models of mental development determination are described. The process of gradual refinement, complexity, «absorption» of the mental determination by the latter models is characterized. The human mental can be deemed as the functioning of the open developing non-equilibrium nonlinear system (dissipative. The mental sphere is

  16. History of internal fixation (part 1): early developments with wires and plates before World War II.

    Science.gov (United States)

    Hernigou, Philippe; Pariat, Jacques

    2017-06-01

    Though the date at which an orthopaedic implant was first used cannot be ascertained with any certainty, the fixation of bone fracture using an iron wire was reported for the first time in a French manuscript in 1775. The first techniques of operative fracture treatment were developed at the end of the 18th and in the beginning of the 19th centuries. The use of cerclage wires to fix fractures was the most frequent fixation at this time. The French Berenger-Feraud (1832-1900) had written the first book on internal fixation. However internal fixation of fractures could not become a practical method before Lister had ensured the safety of open reduction and internal fixation in the treatment of fractures. Lister is not only the father of asepsis; he also used metal wires to fix even closed fractures. The first internal fixation by means of a plate and screws was described by Carl Hansmann in 1858 in Hamburg. Nevertheless, Arbuthnot Lane (1892) and Albin Lambotte (1905) are considered to be the founders of this method, which was further developed by Sherman in the first part of the 20th century.

  17. Improvement of high resolution borehole seismics. Part 1: Development of processing methods for VSP surveys. Part 2: Piezoelectric signal transmitter for seismic measurements

    International Nuclear Information System (INIS)

    Cosma, C.; Heikkinen, P.; Pekonen, S.

    1991-05-01

    The purpose of the high resolution borehole seismics project has been to improve the reliability and resolution of seismic methods in the particular environment of nuclear waste repository sites. The results obtained, especially the data processing and interpretation methods developed, are applicable also to other geophysical methods (e.g. Georadar). The goals of the seismic development project have been: the development of processing and interpretation techniques for mapping fractured zones, and the design and construction of a seismic source complying with the requirements of repository site characterization programs. Because these two aspects of the work are very different in nature, we have structured the report as two self contained parts. Part 1 describes the development of interpretive techniques. We have used for demonstrating the effect of different methods a VSP data set collected at the SCV site during Stage 1 of the project. Five techniques have been studied: FK-filtering, three versions of Tau-p filtering and a new technique that we have developed lately, Image Space filtering. Part 2 refers to the construction of the piezoelectric source. Earlier results obtained over short distances with low energy piezoelectric transmitters let us believe that the same principle could be applied for seismic signal transmitters, if solutions for higher energy and lower frequency output were found. The instrument which we have constructed is a cylindrical unit which can be placed in a borehole and is able to produce a radial strain when excited axially. The minimum borehole diameter is 56 mm. (au)

  18. DEVELOPING MEASURES TO IMPROVE STRENGTH INDICES OF SUPPORTING STRUCTURES FOR HEAD CARS OF DIESEL TRAINS DR1A ON THE BASIS OF EXPERIMENTAL-AND-THEORETICAL WORKS

    Directory of Open Access Journals (Sweden)

    O. M. Bondarev

    2014-11-01

    Full Text Available Purpose. The objective is to determine the stress-strain state of supporting structures of the head car body and the traction transmission unit, which can be created in the operation of emergency situations, and to develop the measures aimed at improving the stress-strain state of these elements. Methodology. In order to achieve this objective, in performing the work an experimental determination of efforts and stress levels in the most loaded elements of supporting structures as well as the traction transmission units was conducted; design models for the theoretical determination of stress and effort levels were developed. Findings. Based on the analysis of the calculation results the best options for the upgrades, which have been put into the basis of proposals aimed at improving the strength indices, were revealed. Originality. Based on the experimental and theoretical studies, scientific monitoring of development works on modernization and improvement of strength indices of supporting structures of head cars of diesel trains DR1A was performed. Practical value. The technical solution to the measures, which are to be carried out beyond the limits of assigned operation lifetime for diesel train of the series specified was developed and transferred to the Ukrzaliznytsia experts to introduce the proposed measures on improving the strength indices.

  19. Effects of starvation on intermolt development in Calanus finmarchicus copepodites: a comparison between theoretical models and field studies1

    Science.gov (United States)

    Crain, Jennifer A.; Miller, Charles B.

    Campbell et al . (Deep Sea Research II, 48 (2001) 531) have shown that there was a localized starvation event affecting Calanus finmarchicus on the southern flank of Georges Bank in April 1997. Growth and molting rates of this dominant copepod were reduced. We have used the morphology of tooth development in field-collected samples to show that this starvation affected animals living continuously in the field, as well as those in Campbell et al .'s experimental tanks. Assuming a point of reserve saturation (PRS) response of Calanus to food limitation, and correspondence between PRS and advance from the postmolt jaw facies, the proportion of individuals with postmolt jaws should increase in all copepodite stages under starvation. Individuals that have developed past PRS should molt to the next stage, acquiring postmolt facies. Thus, the fraction of postmolt jaws should increase, while the fraction of jaws in later phases should decrease. This was observed for a drifter-marked station over five days. Numerical simulations of jaw phase distributions expected under full nutrition, and both total and patchy starvation were generated from individual-based models of development. Proportions of copepodites in postmolt phase do not increase with full nutrition. A simulation of a total starvation event showed a marked increase in postmolts during food limitation, but the increase was more extreme than the field data. A modification of the starvation simulation, representing patchy feeding conditions, matched the level of increase of postmolt individuals in all stages that was observed in the field samples.

  20. Spent catalyst waste management. A review. Part 1. Developments in hydroprocessing catalyst waste reduction and use

    Energy Technology Data Exchange (ETDEWEB)

    Marafi, M.; Stanislaus, A. [Petroleum Refining Department, Petroleum Research and Studies Center, Kuwait Institute for Scientific Research, P.O. Box 24885, 13109-Safat (Kuwait)

    2008-04-15

    Solid catalysts containing metals, metal oxides or sulfides, which play a key role in the refining of petroleum to clean fuels and many other valuable products, become solid wastes after use. In many refineries, the spent catalysts discarded from hydroprocessing units form a major part of these solid wastes. Disposal of spent hydroprocessing catalysts requires compliance with stringent environmental regulations because of their hazardous nature and toxic chemicals content. Various options such as minimizing spent catalyst waste generation by regeneration and reuse, metals recovery, utilization to produce useful materials and treatment for safe disposal, could be considered to deal with the spent catalyst environmental problem. In this paper, information available in the literature on spent hydroprocessing catalyst waste reduction at source by using improved more active and more stable catalysts, regeneration, rejuvenation and reuse of deactivated catalysts in many cycles, and reusing in other processes are reviewed in detail with focus on recent developments. Available methods for recycling of spent hydroprocessing catalysts by using them as raw materials for the preparation of active new catalysts and many other valuable products are also reviewed. (author)

  1. Estimation of Global 1km-grid Terrestrial Carbon Exchange Part I: Developing Inputs and Modelling

    Science.gov (United States)

    Sasai, T.; Murakami, K.; Kato, S.; Matsunaga, T.; Saigusa, N.; Hiraki, K.

    2015-12-01

    Global terrestrial carbon cycle largely depends on a spatial pattern in land cover type, which is heterogeneously-distributed over regional and global scales. However, most studies, which aimed at the estimation of carbon exchanges between ecosystem and atmosphere, remained within several tens of kilometers grid spatial resolution, and the results have not been enough to understand the detailed pattern of carbon exchanges based on ecological community. Improving the sophistication of spatial resolution is obviously necessary to enhance the accuracy of carbon exchanges. Moreover, the improvement may contribute to global warming awareness, policy makers and other social activities. In this study, we show global terrestrial carbon exchanges (net ecosystem production, net primary production, and gross primary production) with 1km-grid resolution. As methodology for computing the exchanges, we 1) developed a global 1km-grid climate and satellite dataset based on the approach in Setoyama and Sasai (2013); 2) used the satellite-driven biosphere model (Biosphere model integrating Eco-physiological And Mechanistic approaches using Satellite data: BEAMS) (Sasai et al., 2005, 2007, 2011); 3) simulated the carbon exchanges by using the new dataset and BEAMS by the use of a supercomputer that includes 1280 CPU and 320 GPGPU cores (GOSAT RCF of NIES). As a result, we could develop a global uniform system for realistically estimating terrestrial carbon exchange, and evaluate net ecosystem production in each community level; leading to obtain highly detailed understanding of terrestrial carbon exchanges.

  2. Thermal enhancement cartridge heater modified (TECH Mod) tritium hydride bed development, Part 1 - Design and fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Klein, J.E.; Estochen, E.G. [Savannah River National Laboratory, Aiken, SC (United States)

    2015-03-15

    The Savannah River Site (SRS) tritium facilities have used first generation (Gen1) LaNi{sub 4.25}Al{sub 0.75} (LANA0.75) metal hydride storage beds for tritium absorption, storage, and desorption. The Gen1 design utilizes hot and cold nitrogen supplies to thermally cycle these beds. Second and third generation (Gen2 and Gen3) storage bed designs include heat conducting foam and divider plates to spatially fix the hydride within the bed. For thermal cycling, the Gen2 and Gen3 beds utilize internal electric heaters and glovebox atmosphere flow over the bed inside the bed external jacket for cooling. The currently installed Gen1 beds require replacement due to tritium aging effects on the LANA0.75 material, and cannot be replaced with Gen2 or Gen3 beds due to different designs of these beds. At the end of service life, Gen1 bed desorption efficiencies are limited by the upper temperature of hot nitrogen supply. To increase end-of-life desorption efficiency, the Gen1 bed design was modified, and a Thermal Enhancement Cartridge Heater Modified (TECH Mod) bed was developed. Internal electric cartridge heaters in the new design to improve end-of-life desorption, and also permit in-bed tritium accountability (IBA) calibration measurements to be made without the use of process tritium. Additional enhancements implemented into the TECH Mod design are also discussed. (authors)

  3. R806 (part 1)

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    R806 was designed by the BNL-CERN-Syracuse-Yale Collaboration (Bill Willis spokesman) to study large transverse momentum phenomena, and installed in intersection 8 of the ISR. The main detectors were Lithium foil transition radiation detectors to identify electrons and liquid argon calorimeters to measure the energy of the electrons and photons (among the first such calorimeters to be used in an experiment). In part 1 there were two modules, top and bottom of the horizontal beam pipe; the black vertical pipe contains the cryogenics (LN2 and Lar) and is connected to the two modules with the horizontal piping.

  4. Development of an internet version of the Lidcombe Program of early stuttering intervention: A trial of Part 1.

    Science.gov (United States)

    Van Eerdenbrugh, Sabine; Packman, Ann; Onslow, Mark; O'brian, Sue; Menzies, Ross

    2018-04-01

    There is evidence that access to treatment for early stuttering is not available for all who need it. An internet version of the Lidcombe Program for early stuttering (Internet-LP) has been developed to deal with this shortfall. The LP is suitable for such development because it is delivered by parents in the child's everyday environment, with training by a speech-language pathologist. A Phase I trial of Internet-LP Part 1, comprising parent training, is reported here. Eight parents of pre-schoolers who stutter were recruited and six completed the trial. Post-trial assessment indicated that the parents scored well for identifying and measuring stuttering and for knowledge about conducting practice sessions, including how to present verbal contingencies during practice sessions. The results prompted minor adjustments to Part 1 and guided the construction of Part 2, which instructs parents during the remainder of the treatment process.

  5. Additive Manufacturing of Syntactic Foams: Part 1: Development, Properties, and Recycling Potential of Filaments

    Science.gov (United States)

    Singh, Ashish Kumar; Patil, Balu; Hoffmann, Niklas; Saltonstall, Brooks; Doddamani, Mrityunjay; Gupta, Nikhil

    2018-03-01

    This work focuses on developing filaments of high-density polyethylene (HDPE) and their hollow particle-filled syntactic foams for commercial three-dimensional (3D) printers based on fused filament fabrication technology. Hollow fly-ash cenospheres were blended by 40 wt.% in a HDPE matrix to produce syntactic foam (HDPE40) filaments. Further, the recycling potential was studied by pelletizing the filaments again to extrude twice (2×) and three times (3×). The filaments were tensile tested at 10-4 s-1, 10-3 s-1, and 10-2 s-1 strain rates. HDPE40 filaments show an increasing trend in modulus and strength with the strain rate. Higher density and modulus were noticed for 2× filaments compared to 1× filaments because of the crushing of some cenospheres in the extrusion cycle. However, 2× and 3× filament densities are nearly the same, showing potential for recycling them. The filaments show better properties than the same materials processed by conventional injection molding. Micro-CT scans show a uniform dispersion of cenospheres in all filaments.

  6. Long Hole Film Cooling Dataset for CFD Development . Part 1; Infrared Thermography and Thermocouple Surveys

    Science.gov (United States)

    Shyam, Vikram; Thurman, Douglas; Poinsatte, Phillip; Ameri, Ali; Eichele, Peter; Knight, James

    2013-01-01

    An experiment investigating flow and heat transfer of long (length to diameter ratio of 18) cylindrical film cooling holes has been completed. In this paper, the thermal field in the flow and on the surface of the film cooled flat plate is presented for nominal freestream turbulence intensities of 1.5 and 8 percent. The holes are inclined at 30deg above the downstream direction, injecting chilled air of density ratio 1.0 onto the surface of a flat plate. The diameter of the hole is 0.75 in. (0.01905 m) with center to center spacing (pitch) of 3 hole diameters. Coolant was injected into the mainstream flow at nominal blowing ratios of 0.5, 1.0, 1.5, and 2.0. The Reynolds number of the freestream was approximately 11,000 based on hole diameter. Thermocouple surveys were used to characterize the thermal field. Infrared thermography was used to determine the adiabatic film effectiveness on the plate. Hotwire anemometry was used to provide flowfield physics and turbulence measurements. The results are compared to existing data in the literature. The aim of this work is to produce a benchmark dataset for Computational Fluid Dynamics (CFD) development to eliminate the effects of hole length to diameter ratio and to improve resolution in the near-hole region. In this report, a Time-Filtered Navier Stokes (TFNS), also known as Partially Resolved Navier Stokes (PRNS), method that was implemented in the Glenn-HT code is used to model coolant-mainstream interaction. This method is a high fidelity unsteady method that aims to represent large scale flow features and mixing more accurately.

  7. The potential of socio-psychological models for the development of prevention programs (Part 1

    Directory of Open Access Journals (Sweden)

    Bovina I.B.

    2014-12-01

    Full Text Available This paper considers the problem of designing prevention programs in health and disease. We note that smoking cessation on the planet would reduce mortality from various types of cancer by 25%, and would also save the lives of hundreds of thousands of people who die each year from heart attacks. Losing weight by only 10% through proper nutrition and exercise would reduce the incidence of cardiovascular disease, as well as certain types of cancer. Based on the literature review, we reveal the different types of prevention, show the importance of preventive measures aimed at the patient's immediate environment. Among the main difficulties associated with the development of effective prevention programs we discuss the following: 1 ignoring the psychological mechanisms of behavior change; 2 irrelevance of media broadcast methods in prevention campaigns; 3 the time between the problem behavior and its negative effects on health. We discuss the potential of social influence models for the development of prevention programs in the field of health and disease.

  8. Fifty years contribution to research and technological development of Argentina. Part 1

    International Nuclear Information System (INIS)

    Aguirre, Fernando; Boselli, Alfredo; Colangelo, Luis J.; Coll, Jorge A.; Espejo, Hector; Mattei, Clara E.; Ornstein, Roberto M.; Palacios, Tulio A.; Radicella, Renato; Rodrigo, Felix

    2001-01-01

    The paper is the first part of a short history of the Argentine National Atomic Energy Commission (CNEA). The activities concerning the fuel cycle are reviewed. The uranium production as well as the manufacturing of nuclear fuel elements is described. (author)

  9. LGBTQ Youth Part 1.

    Science.gov (United States)

    Perron, Tracy; Kartoz, Connie; Himelfarb, Chaya

    2017-03-01

    In order to provide holistic care, school nurses must be culturally competent by being sensitive to health disparities experienced by students in at-risk populations. Despite the growing acceptance toward gender and sexual minorities, LGBTQ youth remain an at-risk population in our communities and our schools. School nurses as well as school counselors, social workers, and psychologists can increase their cultural competence in caring for this group of students by increasing their understanding of appropriate terminology and risks associated with this vulnerable group. This article is Part 1 of a two-article series designed to increase school nurses' abilities to advocate and care for LGBTQ youth in school settings. This first article provides information regarding proper terminology and current percentages of youth who identify as LGBTQ and concludes with implications for school nurses, including resources for nurses, school staff, and families.

  10. Apparel shopping behaviour – Part 2: Conceptual theoretical model, market segments, profiles and implications

    Directory of Open Access Journals (Sweden)

    R. Du Preez

    2003-10-01

    Full Text Available This article is based on the conceptual theoretical model developed in Part 1 of this series of articles. The objective of this research is to identify female apparel consumer market segments on the basis of differentiating lifestyles, shopping orientation, cultural consciousness, store patronage and demographics. These profiles are discussed in full and the implications thereof for retailers, marketers and researchers are highlighted. A new conceptual model is proposed and recommendations are made for further research. Opsomming Hierdie artikel word gebaseer op die konseptuele teoretiese model wat reeds in Deel 1 van hierdie artikelreeks ontwikkel is. Die doel van hierdie navorsing is om marksegmente van vroue klere-kopers te identifiseer na aanleiding van hulle lewenstyle, kooporiëntasie, kulturele bewustheid, winkelvoorkeurgedrag en demografie. Hierdie profiele word volledig beskryf en die implikasies van die verskillende profiele vir kleinhandelaars, bemarkers en navorsers word uitgelig. ’n Nuwe konseptuele model word voorgestel en aanbevelings vir verdere navorsing word gemaak.

  11. An Advanced TALSPEAK Concept for Separating Minor Actinides. Part 1. Process Optimization and Flowsheet Development

    Energy Technology Data Exchange (ETDEWEB)

    Lumetta, Gregg J. [Pacific Northwest National Laboratory, Nuclear Science and Engineering Group, Richland, WA, USA; Levitskaia, Tatiana G. [Pacific Northwest National Laboratory, Nuclear Science and Engineering Group, Richland, WA, USA; Wilden, Andreas [Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Nukleare Entsorgung und Reaktorsicherheit (IEK-6), Jülich, Germany; Casella, Amanda J. [Pacific Northwest National Laboratory, Nuclear Science and Engineering Group, Richland, WA, USA; Hall, Gabriel B. [Pacific Northwest National Laboratory, Nuclear Science and Engineering Group, Richland, WA, USA; Lin, Leigh [Pacific Northwest National Laboratory, Nuclear Science and Engineering Group, Richland, WA, USA; Sinkov, Sergey I. [Pacific Northwest National Laboratory, Nuclear Science and Engineering Group, Richland, WA, USA; Law, Jack D. [Idaho National Laboratory, Aqueous Separations and Radiochemistry Department, Idaho Falls, ID, USA; Modolo, Giuseppe [Forschungszentrum Jülich GmbH, Institut für Energie- und Klimaforschung – Nukleare Entsorgung und Reaktorsicherheit (IEK-6), Jülich, Germany

    2017-08-18

    A system is being developed to separate trivalent actinides from lanthanide fission product elements that uses 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester to extract the lanthanide ions into an organic phase, while the actinide ions are held in the citrate-buffered aqueous phase by complexation to N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA). Earlier investigations of this system using a 2-cm centrifugal contactor revealed that the relatively slow extraction of Sm3+, Eu3+, and Gd3+ resulted in low separation factors from Am3+. In the work reported here, adjustments to the aqueous phase chemistry were made to improve the extraction rates. The results suggest that increasing the concentration of the citric acid buffer from 0.2 to 0.6 mol/L, and lowering the pH from 3.1 to 2.6, significantly improved lanthanide extraction rates resulting in an actinide/lanthanide separation system suitable for deployment in centrifugal contactors. Experiments performed to evaluate whether the lanthanide extraction rates can be improved by replacing aqueous HEDTA with nitrilotriacetic acid (NTA) exhibited promising results. However, NTA exhibited an unsatisfactorily high distribution value for Am3+ under the extraction conditions examined.

  12. Urban Maglev Technology Development Program : Colorado Maglev Project : part 1 : executive summary of final report

    Science.gov (United States)

    2004-06-01

    The overall objective of the urban maglev transit technology development program is to develop magnetic levitation technology that is a cost effective, reliable, and environmentally sound transit option for urban mass transportation in the United Sta...

  13. An Industrial-Based Consortium to Develop Premium Carbon Products from Coal Final Report - Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Bruce; Winton, Shea

    2010-12-31

    Since 1998, The Pennsylvania State University successfully managed the Consortium for Premium Carbon Products from Coal (CPCPC), which was a vehicle for industry-driven research on the promotion, development, and transfer of innovative technologies on premium carbon products from coal to the U.S. industry. The CPCPC was an initiative led by Penn State, its cocharter member West Virginia University (WVU), and the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL), who also provided the base funding for the program, with Penn State responsible for consortium management. CPCPC began in 1998 under DOE Cooperative Agreement No. DE-FC26-98FT40350. This agreement ended November 2004 but the CPCPC activity continued under cooperative agreement No. DE-FC26-03NT41874, which started October 1, 2003 and ended December 31, 2010. The objective of the second agreement was to continue the successful operation of the CPCPC. The CPCPC enjoyed tremendous success with its organizational structure, which included Penn State and WVU as charter members, numerous industrial affiliate members, and strategic university affiliate members together with NETL, forming a vibrant and creative team for innovative research in the area of transforming coal to carbon products. The key aspect of CPCPC was its industry-led council that selected proposals submitted by CPCPC members to ensure CPCPC target areas had strong industrial support. CPCPC had 58 member companies and universities engaged over the 7-year period of this contract. Members were from 17 states and five countries outside of the U.S. During this period, the CPCPC Executive Council selected 46 projects for funding. DOE/CPCPC provided $3.9 million in funding or an average of $564,000 per year. The total project costs were $5.45 million with $1.5 million, or ~28% of the total, provided by the members as cost share. Total average project size was $118,000 with $85,900 provided by DOE/CPCPC. In addition to

  14. Track treeing mechanism and plastic zone in solid Part 1: Initial development of plastic zone

    International Nuclear Information System (INIS)

    Li Boyang

    2008-01-01

    After neutron exposure and chemical etching in advance, latent tracks of recoil nucleon develop into pits on CR39 surface. During electrochemical etching, plastic zone is formed at top of pits. Some pits develop into tree cracks in the initial stage of plastic zone development. Physical and mathematical model of crack and plastic zone is proposed; parameter of development free path of plastic zone is presented. Based on integration of elementary theories the stress analysis is build up; based on analyses of measured parameters, a set of common relations between parameters is obtained. Integrate parameter analysis and stress analysis, depth of plastic zone development, law and phenomenon in experimental data can be interpreted completely

  15. Y-12 Development Organization technical progress report: Part 3 -- Metal processing, period ending March 1, 1994

    International Nuclear Information System (INIS)

    Northcutt, W.G. Jr.

    1994-01-01

    As part of the effort to downsize its uranium processing facilities, the Y-12 Plant has supported an investigation to identify extraction solvents that would both work efficiently in centrifugal contactors and be disposed of easily. Various organic ethers, hydroxy ethers, ether ketones, acids, amides, and diketones were studied for their ability to extract uranyl nitrate from aqueous solutions. Although many of these solvents were obtained commercially, others had to be synthesized in-house. The authors found a large range of extraction coefficients for these solvents. Because of steric hindrance or some other factor, certain ethers performed poorly. On the other hand, various mono- and diethers of tetrahydrofurfuryl alcohol exhibited excellent extraction and stripping coefficients for uranyl nitrate, justifying purchase of a pilot plant batch of one of this family of solvents. Likewise, the authors determined the extraction coefficient for one of the two amides synthesized in-house to be quite high

  16. Digital Divide and International Research and Development in Information Technology and Teacher Education, Part 1

    NARCIS (Netherlands)

    Laferriere, Therese; Resta, Paul; Davis, Niki; McLaughlin, Robert; Orey, Michael; Shakwa, Geoffrey; Malone, Todd; Wilder, Hilary; Gibson, Ian; Beisser, Sally; FitzGibbon, Ann; Brennan Freeman, Eileen; Castro-Filho, Jose Aires; Voogt, Joke; Knezek, Gerald; Hargrave, Connie; Carlsen, Roger; McFerrin, Karen; Price, Jerry; Weber, Roberta; Willis, Dee Anna

    2007-01-01

    The maturing research and development foci of SITE's International Committee have an ethical dimension. Comparative research and international collaboration are a healthy way, facilitated by communication technologies, to increase diversity within teacher education as well as to increase the quality

  17. Integrated structural analysis tool using the linear matching method part 1 – Software development

    International Nuclear Information System (INIS)

    Ure, James; Chen, Haofeng; Tipping, David

    2014-01-01

    A number of direct methods based upon the Linear Matching Method (LMM) framework have been developed to address structural integrity issues for components subjected to cyclic thermal and mechanical load conditions. This paper presents a new integrated structural analysis tool using the LMM framework for the assessment of load carrying capacity, shakedown limit, ratchet limit and steady state cyclic response of structures. First, the development of the LMM for the evaluation of design limits in plasticity is introduced. Second, preliminary considerations for the development of the LMM into a tool which can be used on a regular basis by engineers are discussed. After the re-structuring of the LMM subroutines for multiple central processing unit (CPU) solution, the LMM software tool for the assessment of design limits in plasticity is implemented by developing an Abaqus CAE plug-in with graphical user interfaces. Further demonstration of this new LMM analysis tool including practical application and verification is presented in an accompanying paper. - Highlights: • A new structural analysis tool using the Linear Matching Method (LMM) is developed. • The software tool is able to evaluate the design limits in plasticity. • Able to assess limit load, shakedown, ratchet limit and steady state cyclic response. • Re-structuring of the LMM subroutines for multiple CPU solution is conducted. • The software tool is implemented by developing an Abaqus CAE plug-in with GUI

  18. Modern trends in theoretical radiation chemistry development

    International Nuclear Information System (INIS)

    Kaplan, I.G.

    1983-01-01

    Most important trends in the development of radiation chemitry theory are considered. Wide use of electronic computers for modeling different stages of radiolysis in conjUnction with advanced precision experimental methods (picosecond pulse radiolysis, acceptor additions method, magnetic method of detecting interstitial active particles) is noted. Information obtained in photochemistry and molecular spectroscopy, including laser photolysis, is in common use in developing the theory. It is noted that data on the processes occurring within less than 10 -12 s time can be obtained now only on the base of theoretical representations about the mechanism of ionizing irradiation interaction with molecular medium. Therefore, special attention in the review is paid to investigation of primary radiolysis processes. Besides investigation of primary medium excitation processes theoretical investigations into the ways of energy degradation, knocked out electrons and their further state are continued. It is noted that a considerable number of papers deal with the nature and behaviour of radiation-induced excess electrons in non-polar solutions and solid matrices. Works on application of diffusion kinetics in radiolysis have been developed in recent years

  19. SEU blending project concept to commercial operation. Part 1: process development

    International Nuclear Information System (INIS)

    Ioffe, M.S.; Bhattacharjee, S.; Oliver, A.J.; Ozberk, E.

    2004-01-01

    The process development test program for production of Slightly Enriched Uranium (SEU) dioxide powder had started with 100 g Low Enriched Uranium (LEU) dioxide powder samples obtained from different suppliers. Encouraging results obtained in the initial test program established a basis for working with 9.5 kg LEU powder samples and production of larger quantities of SEU powder for characterization to meet the target quality and ensuring development of process design criteria for the commercial scale plant design. Similarly, the process development test program for production of Blended Dysprosium and Uranium (BDU) oxide powders was initiated using different Dy 2 O 3 powder samples from different suppliers. The variability of the quality of Dy 2 O 3 powder samples received from different suppliers resulted in substantial investigation in characterization of Dy 2 O 3 powders. The test program for both products required forming a cross-functional project team from several departments within Cameco with the focus of the development work to be carried out at the Cameco Technology Development. Many aspects of developing two new products were addressed. These included developing design criteria for preparation of SEU and BDU powders for a Demonstration Irradiation (DI) program and commercial scale plant, Quality Assurance program (including specifications for SEU and BDU powder products, SEU and BDU scraps, Cameco Quality Specifications for purchasing LEU and Dy 2 O 3 powders, and Inspection and Test Plan for SEU and BDU powder production), accurate uranium accountability, enhanced safety requirements, bench and laboratory test safety and operability manuals and procedures for analysis. (author)

  20. Ocean thermal energy conversion (OTEC) power system development. Preliminary design report, Appendices, Part 1 (Final)

    Energy Technology Data Exchange (ETDEWEB)

    1978-12-04

    The objective of this project is the development of a preliminary design for a full-sized, closed cycle, ammonia power system module for the 100 MWe OTEC demonstration plant. In turn, this demonstration plant is to demonstrate, by 1984, the operation and performance of an Ocean Thermal Power Plant having sufficiently advanced heat exchanger design to project economic viability for commercial utilization in the late 1980's and beyond. Included in this power system development are the preliminary designs for a proof-of-concept pilot plant and test article heat exchangers which are scaled in such a manner as to support a logically sequential, relatively low-cost development of the full-scale power system module. The conceptual designs are presented for the demonstration plant power module, the proof-of-concept pilot plant, and for a pair of test article heat exchangers. Costs associated with the design, development, fabrication, checkout, delivery, installation, and operation are included. The accompanying design and producibilty studies on the full-scale power system module project the performance/economics for the commercial plant. This section of the report contains appendices on the developed computer models, water system dynamic studies, miscellaneous performance analysis, materials and processes, detailed equipment lists, turbine design studies, tube cleaner design, ammonia leak detection, and heat exchanger design supporting data. (WHK)

  1. Integrating Environmental Decisions into the Product Development Process: Part 1 - The Early Stages

    DEFF Research Database (Denmark)

    Bhamra, T.; Evans, S.; McAloone, Timothy Charles

    1999-01-01

    environmental decisions into their product development process which is very unusual in that ecodesign is significantly different for the pre- and post-specification stages of the design process. This paper explains the findings related to the first phase being the very early stages of the product development...... in the UK, Central Europe and the USA are carrying out Ecodesign. The survey also investigated the successes and failures companies had experienced and the lessons they had learnt along the way. From this survey we identified a number of success factors that enabled companies to successfully integrate...... process prior to the specification being finalised. A second paper, considers the findings from the later phases of the product development process....

  2. Material Factors in Relation to Development Time in Liquid-Penetrant Inspection. Part 1. Material Factors

    Directory of Open Access Journals (Sweden)

    Irek P.

    2016-06-01

    Full Text Available In technical publications and European Standards the development time (i.e. time of getting out of penetrant from a discontinuity to the material surface in penetration testing is specified within the range of 10-30 minutes. In practice, however, it is seen , that it is closely connected

  3. Home grown hydro, part 1: Hydro development in Canada key to regional, international business expansion

    International Nuclear Information System (INIS)

    Wiebe, P.A.

    1994-01-01

    Canada has had a long and successful record of hydroelectric power development since the first hydraulic generators were installed at Chaudiere Falls near Ottawa in 1881. Canadian hydro engineers have demonstrated their ability to develop and manage higher voltages, longer transmission networks, larger projects, remote sites, and undersea cable technology. Canada has earned a reputation for excellence in the hydro industry and is successful at exporting its expertise to develop hydro resources in the international market. A prominent example is provided by the Three Gorges Project in China, for which the Chinese Ministry of Energy searched for the best foreign engineers to prepare a feasibility report. A Canadian team that integrated the expertise of hydro consultants, utilities, and major equipment suppliers was chosen to prepare the report, winning over teams from the USA, Brazil, and Europe. Success in this initiative is attributed to Canada's ability to demonstrate the favorable application of new technology at James Bay. Domestic hydro projects are thus seen as crucial in efforts to expand into international markets. However, Canada's new completed hydro capacity has fallen dramatically since 1986, and Canadian hydro contractors have tended to remain domestic operators with little incentive to enter foreign markets. By having the foresight to begin new hydro developments now, Canada would benefit from increased employment and orders for equipment, and would ensure a continuing base of technical expertise and innovation in the electrical industry. 2 figs

  4. A Model for Promoting Poultry Industry Development in Togo: Part 1. Management Practices and Incubation Conditions

    NARCIS (Netherlands)

    Tona, K.; Agbonon, A.; Eklu-Gadegbeku, K.; Teteh, A.; Simons, P.; Buyse, J.; Everaert, N.; Kemp, B.; Decuypere, E.; Gbeassor, M.

    2014-01-01

    In commercial poultry husbandry practice, the hatchery takes over the incubation of bird eggs in order to provide as many day-old chicks as needed at any time to farmers. The main bottleneck for poultry industry development in Togo is the lack of day-old chick supply. Indeed, there is no proficient

  5. Home grown hydro, part 1: Hydro development in Canada key to regional, international business expansion

    Energy Technology Data Exchange (ETDEWEB)

    Wiebe, P.A

    1994-06-01

    Canada has had a long and successful record of hydroelectric power development since the first hydraulic generators were installed at Chaudiere Falls near Ottawa in 1881. Canadian hydro engineers have demonstrated their ability to develop and manage higher voltages, longer transmission networks, larger projects, remote sites, and undersea cable technology. Canada has earned a reputation for excellence in the hydro industry and is successful at exporting its expertise to develop hydro resources in the international market. A prominent example is provided by the Three Gorges Project in China, for which the Chinese Ministry of Energy searched for the best foreign engineers to prepare a feasibility report. A Canadian team that integrated the expertise of hydro consultants, utilities, and major equipment suppliers was chosen to prepare the report, winning over teams from the USA, Brazil, and Europe. Success in this initiative is attributed to Canada's ability to demonstrate the favorable application of new technology at James Bay. Domestic hydro projects are thus seen as crucial in efforts to expand into international markets. However, Canada's new completed hydro capacity has fallen dramatically since 1986, and Canadian hydro contractors have tended to remain domestic operators with little incentive to enter foreign markets. By having the foresight to begin new hydro developments now, Canada would benefit from increased employment and orders for equipment, and would ensure a continuing base of technical expertise and innovation in the electrical industry. 2 figs.

  6. Male hypogonadism (Part 1)

    OpenAIRE

    Ye.V. Luchytskyy; V.Yе. Luchytskyy; M.D. Tronko

    2017-01-01

    The first part of the review presents the current data on the prevalence of male hypogonadism, methods of diagnosing different forms of hypogonadism, describes the clinical manifestations of the most common forms of this disease.

  7. Male hypogonadism (Part 1

    Directory of Open Access Journals (Sweden)

    Ye.V. Luchytskyy

    2017-05-01

    Full Text Available The first part of the review presents the current data on the prevalence of male hypogonadism, methods of diagnosing different forms of hypogonadism, describes the clinical manifestations of the most common forms of this disease.

  8. High-Uranium-Loaded U3O8-Al fuel element development program. Part 1

    International Nuclear Information System (INIS)

    Martin, M.M.

    1993-01-01

    The High-Uranium-Loaded U 3 O 8 -Al Fuel Element Development Program supports Argonne National Laboratory efforts to develop high-uranium-density research and test reactor fuel to accommodate use of low-uranium enrichment. The goal is to fuel most research and test reactors with uranium of less than 20% enrichment for the purpose of lowering the potential for diversion of highly-enriched material for nonpeaceful usages. The specific objective of the program is to develop the technological and engineering data base for U 3 O 8 -Al plate-type fuel elements of maximal uranium content to the point of vendor qualification for full scale fabrication on a production basis. A program and management plan that details the organization, supporting objectives, schedule, and budget is in place and preparation for fuel and irradiation studies is under way. The current programming envisions a program of about four years duration for an estimated cost of about two million dollars. During the decades of the fifties and sixties, developments at Oak Ridge National Laboratory led to the use of U 3 O 8 -Al plate-type fuel elements in the High Flux Isotope Reactor, Oak Ridge Research Reactor, Puerto Rico Nuclear Center Reactor, and the High Flux Beam Reactor. Most of the developmental information however applies only up to a uranium concentration of about 55 wt % (about 35 vol % U 3 O 8 ). The technical issues that must be addressed to further increase the uranium loading beyond 55 wt % U involve plate fabrication phenomena of voids and dogboning, fuel behavior under long irradiation, and potential for the thermite reaction between U 3 O 8 and aluminum

  9. Medico-biological factors of speech and language development in young children (part 1

    Directory of Open Access Journals (Sweden)

    Chernov D.N.

    2015-03-01

    Full Text Available The article analyzed the main results of medico-biological directions in the study of the factors of children's speech and language. It shows that a variety of pre-, peri-and neonatal developmental factors (teratogenic effects, prematurity, low birth weight, maternal diseases during pregnancy, and chronic diseases of the child had a negative impact on the child-parent relationship that has a lasting influence on child speech and language development.

  10. High energy physics studies. Progress report. Part I. Experimental program. Part II. Theoretical program

    International Nuclear Information System (INIS)

    Romanowski, T.A.; Tanaka, K.; Wada, W.W.

    1978-01-01

    Experimental Program: assembly of an experiment as Fermilab E-531 to measure decay lifetimes, with tagged emulsion of charmed particles produced by high energy neutrinos was finished, and data taking now is in progress. An experiment to measure prompt neutrino production at Fermilab, E-613, was approved and detailed design of it is continuing. Search for parity violation in scattering of polarized protons, an experiment E-446-ZGS at ANL, was performed with the sensitivity of 10 -6 for detection of that process and yielded null results. Another run with improved sensitivity of 10 -7 is in preparation. Data analysis of the neutrino experiment E-310 at Fermilab will continue. Trimuon events, a new discovery, were identified in those data. Analysis of data on meson production from experiments performed at the ZGS--ANL, E-397, E-420 and E-428, with charged and neutral spectrometer will continue. A new relatively broad resonance (T approx. 70 MeV) with quantum numbers IJ/sup P/ = 00 -1 was discovered in the data from E-397. Analysis of beta decay of polarized Σ - hyperons is in progress. Participation in the design of the experimental areas for the Isabelle colliding proton beam accelerator will continue. Theoretical Program: topics of current interest in particle theory which will be investigated in the coming year are: the instanton-anti-instanton QCD gauge fields, discrete symmetries which may determine quark masses in the SU(2) x U(1) model, calculation of charmed meson production in e + e - collisions and formation of gluon jets, Higgs boson production in pp collisions, calculation of Higgs boson mass in terms of vector boson mass, study of Lagrangians with gauge and Higgs scalar fields, investigation of Faddeev--Popov determinants as related to quantum chromodynamics, a study of quantum flavor dynamics and anomalies in the axial vector Ward identity and a study of super symmetry as a part of a realistic model of leptonic interactions

  11. Sustainable development. First part

    International Nuclear Information System (INIS)

    Colombo, U.; Lanzavecchia, G.; Berrini, M; Zambrini, M.; Bologna, G.; Carraro, C.; Hinterberger, F.; Mastino, G.; Federico, A.; Gaudioso, D.; Luise, A.; Mauro, F.; Padovani, L.; Federico, A.

    1998-01-01

    This paper summarizes a collective effort and represents the second edition of: Environment, energy, economy: a sustainable future. In this work are reported various interventions on sustainable development problem [it

  12. Vitiligo - Part 1*

    Science.gov (United States)

    Tarlé, Roberto Gomes; do Nascimento, Liliane Machado; Mira, Marcelo Távora; de Castro, Caio Cesar Silva

    2014-01-01

    Vitiligo is a chronic stigmatizing disease, already known for millennia, which mainly affects melanocytes from epidermis basal layer, leading to the development of hypochromic and achromic patches. Its estimated prevalence is 0.5% worldwide. The involvement of genetic factors controlling susceptibility to vitiligo has been studied over the last decades, and results of previous studies present vitiligo as a complex, multifactorial and polygenic disease. In this context, a few genes, including DDR1, XBP1 and NLRP1 have been consistently and functionally associated with the disease. Notwithstanding, environmental factors that precipitate or maintain the disease are yet to be described. The pathogenesis of vitiligo has not been totally clarified until now and many theories have been proposed. Of these, the autoimmune hypothesis is now the most cited and studied among experts. Dysfunction in metabolic pathways, which could lead to production of toxic metabolites causing damage to melanocytes, has also been investigated. Melanocytes adhesion deficit in patients with vitiligo is mainly speculated by the appearance of Köebner phenomenon, recently, new genes and proteins involved in this deficit have been found. PMID:24937821

  13. Remediation strategies after nuclear or radiological accidents: part 1 - database development

    International Nuclear Information System (INIS)

    Silva, Diogo N.G.; Wasserman, Maria Angelica V.; Rochedo, Elaine R.R.

    2009-01-01

    The selection of protective measures and of remediation strategies of areas after a nuclear or radiological accident needs to be based on previously established criteria, in way to minimize the public's emotional stress and the exposure to workers involved in cleanup operations due to the implementation of procedures that are not effective in reducing doses to the public. Thus this work intended to develop a database which allows supporting the decision-making process after these accidents, by describing the foreseen strategies according to the type of accident and the type of affected environment, in order to be used in a multi-criteria selective process. To achieve that, in this first stage, the database has been developed including the following aspects: type of environment (urban, rural or aquatic); their contamination removal efficiency, as function of the time elapsed since the contamination event; the type and the amount of waste generated in the application of the strategy; the expected doses to the work team and basic needs such as specific materials, equipment, training, IPE, among others. The protection measures are usually described in literature considering their activity removal efficiency of a certain surface or environment. In order to determine their efficiency in the reduction of doses, a second stage is foreseen, involving the simulation of the implementation of the measures in different moments after the contamination, based on pre-defined accidents and scenarios, with focus on the surroundings of the Brazilian Nuclear Power Plants in Angra dos Reis. (author)

  14. Remediation strategies after nuclear or radiological accidents: part 1 - database development

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Diogo N.G.; Wasserman, Maria Angelica V. [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)], e-mail: dneves@ird.gov.br, e-mail: angelica@ird.gov.br, e-mail: lfcconti@ird.gov.br; Rochedo, Elaine R.R. [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil). Coordenacao de Instalacoes Nucleares], e-mail: erochedo@cnen.gov.br

    2009-07-01

    The selection of protective measures and of remediation strategies of areas after a nuclear or radiological accident needs to be based on previously established criteria, in way to minimize the public's emotional stress and the exposure to workers involved in cleanup operations due to the implementation of procedures that are not effective in reducing doses to the public. Thus this work intended to develop a database which allows supporting the decision-making process after these accidents, by describing the foreseen strategies according to the type of accident and the type of affected environment, in order to be used in a multi-criteria selective process. To achieve that, in this first stage, the database has been developed including the following aspects: type of environment (urban, rural or aquatic); their contamination removal efficiency, as function of the time elapsed since the contamination event; the type and the amount of waste generated in the application of the strategy; the expected doses to the work team and basic needs such as specific materials, equipment, training, IPE, among others. The protection measures are usually described in literature considering their activity removal efficiency of a certain surface or environment. In order to determine their efficiency in the reduction of doses, a second stage is foreseen, involving the simulation of the implementation of the measures in different moments after the contamination, based on pre-defined accidents and scenarios, with focus on the surroundings of the Brazilian Nuclear Power Plants in Angra dos Reis. (author)

  15. Patients' expectations of orthodontic treatment: part 1 - development of a questionnaire.

    Science.gov (United States)

    Sayers, M S; Newton, J T

    2006-12-01

    The development of a questionnaire to measure patients' and their parents' expectations before orthodontic treatment, and to test the reliability and validity of this measure. A two-stage methodology, with open-ended interviews to identify themes and concepts followed by development and testing of the questionnaire. GKT Orthodontic Department, King's College Dental Hospital. The sample consisted of 140 participants, 70 patients aged 12-14 years, who had been referred to the orthodontic department for treatment. One parent of each patient was also recruited. The study was in two phases. In the first phase 30 participants (15 new patients and their 15 parents) participated in open-ended interviews, which were analysed qualitatively. Information from these interviews was used to construct a questionnaire. During the second phase, the questionnaire was piloted on 10 participants, five new consecutive patients and their parents. The questionnaire was then distributed to 174 subjects (87 new patients and their 87 parents). Seventy-eight subjects (39 new patients and their 39 parents) completed the questionnaire before their orthodontic consultation. Another 96 subjects (48 new patients and their 48 parents) were invited to complete the questionnaire prior to and at their orthodontic consultation. Test-retest analysis was conducted on 22 participants (11 patients and their 11 parents), who completed the questionnaire previous to and at their orthodontic consultation, and contributed to the psychometric validation of this questionnaire. A questionnaire was devized using the key themes and concepts identified in the open-ended interviews. As a result, 10 questions, some with sub-questions were constructed using a visual analogue scale as the response format. The questionnaire developed had good face validity. Internal consistency of the questionnaire using Cronbach's alpha, produced an overall inter-item reliability > 0.7 along with item-total correlations > 0.3 in over 50

  16. Sediment carbon fate in phreatic karst (Part 1): Conceptual model development

    Science.gov (United States)

    Husic, A.; Fox, J.; Agouridis, C.; Currens, J.; Ford, W.; Taylor, C.

    2017-06-01

    Recent research has paid increased attention to quantifying the fate of carbon pools within fluvial networks, but few, if any, studies consider the fate of sediment organic carbon in fluviokarst systems despite that karst landscapes cover 12% of the earth's land surface. The authors develop a conceptual model of sediment carbon fate in karst terrain with specific emphasis upon phreatic karst conduits, i.e., those located below the groundwater table that have the potential to trap surface-derived sediment and turnover carbon. To assist with their conceptual model development, the authors study a phreatic system and apply a mixture of methods traditional and novel to karst studies, including electrical resistivity imaging, well drilling, instantaneous velocimetry, dye tracing, stage recording, discrete and continuous sediment and water quality sampling, and elemental and stable carbon isotope fingerprinting. Results show that the sediment transport carrying capacity of the phreatic karst water is orders of magnitude less than surface streams during storm-activated periods promoting deposition of fine sediments in the phreatic karst. However, the sediment transport carrying capacity is sustained long after the hydrologic event has ended leading to sediment resuspension and prolonged transport. The surficial fine grained laminae occurs in the subsurface karst system; but unlike surface streams, the light-limited conditions of the subsurface karst promotes constant heterotrophy leading to carbon turnover. The coupling of the hydrological processes leads to a conceptual model that frames phreatic karst as a biologically active conveyor of sediment carbon that recharges degraded organic carbon back to surface streams. For example, fluvial sediment is estimated to lose 30% of its organic carbon by mass during a one year temporary residence within the phreatic karst. It is recommended that scientists consider karst pathways when attempting to estimate organic matter stocks

  17. Plutonium microstructures. Part 1

    International Nuclear Information System (INIS)

    Cramer, E.M.; Bergin, J.B.

    1981-09-01

    This report is the first of three parts in which Los Alamos and Lawrence Livermore National Laboratory metallographers exhibit a consolidated set of illustrations of inclusions that are seen in plutonium metal as a consequence of inherent and tramp impurities, alloy additions, and thermal or mechanical treatments. This part includes illustrations of nonmetallic and intermetallic inclusions characteristic of major impurity elements as an aid to identifying unknowns. It also describes historical aspects of the increased purity of laboratory plutonium samples, and it gives the composition of the etchant solutions and describes the etching procedure used in the preparation of each illustrated sample. 25 figures

  18. Three phase heat and mass transfer model for unsaturated soil freezing process: Part 1 - model development

    Science.gov (United States)

    Xu, Fei; Zhang, Yaning; Jin, Guangri; Li, Bingxi; Kim, Yong-Song; Xie, Gongnan; Fu, Zhongbin

    2018-04-01

    A three-phase model capable of predicting the heat transfer and moisture migration for soil freezing process was developed based on the Shen-Chen model and the mechanisms of heat and mass transfer in unsaturated soil freezing. The pre-melted film was taken into consideration, and the relationship between film thickness and soil temperature was used to calculate the liquid water fraction in both frozen zone and freezing fringe. The force that causes the moisture migration was calculated by the sum of several interactive forces and the suction in the pre-melted film was regarded as an interactive force between ice and water. Two kinds of resistance were regarded as a kind of body force related to the water films between the ice grains and soil grains, and a block force instead of gravity was introduced to keep balance with gravity before soil freezing. Lattice Boltzmann method was used in the simulation, and the input variables for the simulation included the size of computational domain, obstacle fraction, liquid water fraction, air fraction and soil porosity. The model is capable of predicting the water content distribution along soil depth and variations in water content and temperature during soil freezing process.

  19. Development of Aircraft Sandwich Parts

    Directory of Open Access Journals (Sweden)

    J. Křena

    2000-01-01

    Full Text Available The presented paper shows the design and development process of sandwich parts. A spoiler plate and a main landing gear door are developed. Sandwich parts are made of C/E composite facings and a foam core. FE models have been used for optimization of structures. Emphasis has been placed on deformations of parts under a few load cases. Experimental tests have been used for a verification of structure parts loaded by concentrated forces.

  20. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 1, Part A: Chapters 1 and 2

    International Nuclear Information System (INIS)

    1988-12-01

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 750 refs., 123 figs., 42 tabs

  1. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 1, Part A: Chapters 1 and 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-01

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 750 refs., 123 figs., 42 tabs.

  2. Behaviors in Advance Care Planning and ACtions Survey (BACPACS): development and validation part 1.

    Science.gov (United States)

    Kassam, Aliya; Douglas, Maureen L; Simon, Jessica; Cunningham, Shannon; Fassbender, Konrad; Shaw, Marta; Davison, Sara N

    2017-11-22

    Although advance care planning (ACP) is fairly well understood, significant barriers to patient participation remain. As a result, tools to assess patient behaviour are required. The objective of this study was to improve the measurement of patient engagement in ACP by detecting existing survey design issues and establishing content and response process validity for a new survey entitled Behaviours in Advance Care Planning and ACtions Survey (BACPACS). We based our new tool on that of an existing ACP engagement survey. Initial item reduction was carried out using behavior change theories by content and design experts to help reduce response burden and clarify questions. Thirty-two patients with chronic diseases (cancer, heart failure or renal failure) were recruited for the think aloud cognitive interviewing with the new, shortened survey evaluating patient engagement with ACP. Of these, n = 27 had data eligible for analysis (n = 8 in round 1 and n = 19 in rounds 2 and 3). Interviews were audio-recorded and analyzed using the constant comparison method. Three reviewers independently listened to the interviews, summarized findings and discussed discrepancies until consensus was achieved. Item reduction from key content expert review and conversation analysis helped decrease number of items from 116 in the original ACP Engagement Survey to 24-38 in the new BACPACS depending on branching of responses. For the think aloud study, three rounds of interviews were needed until saturation for patient clarity was achieved. The understanding of ACP as a construct, survey response options, instructions and terminology pertaining to patient engagement in ACP warranted further clarification. Conversation analysis, content expert review and think aloud cognitive interviewing were useful in refining the new survey instrument entitled BACPACS. We found evidence for both content and response process validity for this new tool.

  3. Electricity Bill [Part 1

    International Nuclear Information System (INIS)

    Parkinson, C.; Hogg, N.; Salmond, A.

    1988-01-01

    The paper presents the first part of the Parliamentary debate on the second reading of the Electricity Bill, House of Commons, London 1988. The Bill sets out the government's proposals for the restructuring and privatisation of the electricity supply industry throughout Great Britain. Customers and suppliers, choice for the consumer, competition promotion, security of supply, nuclear power stations, and cost, are all discussed. (U.K.)

  4. Theoretical and methodological foundations of sustainable development of Geosystems

    Science.gov (United States)

    Mandryk, O. M.; Arkhypova, L. M.; Pukish, A. V.; Zelmanovych, A.; Yakovlyuk, Kh

    2017-05-01

    The theoretical and methodological foundations of sustainable development of Geosystems were further evolved. It was grounded the new scientific direction “constructive Hydroecology” - the science that studies the Hydrosphere from the standpoint of natural and technogenic safety based on geosystematical approach. A structural separation for constructive Hydroecology based on objective, subjective, and application characteristics was set. The main object of study of the new scientific field is the hydroecological environment under which the part of Hydrosphere should be understood as a part of the multicomponent dynamic system that is influenced by engineering and economical human activities and, in turn, determines to some extent this activity.

  5. High-performance work systems in health care management, part 1: development of an evidence-informed model.

    Science.gov (United States)

    Garman, Andrew N; McAlearney, Ann Scheck; Harrison, Michael I; Song, Paula H; McHugh, Megan

    2011-01-01

    : Although management practices are recognized as important factors in improving health care quality and efficiency, most research thus far has focused on individual practices, ignoring or underspecifying the contexts within which these practices are operating. Research from other industries, which has increasingly focused on systems rather than individual practices, has yielded results that may benefit health services management. : Our goal was to develop a conceptual model on the basis of prior research from health care as well as other industries that could be used to inform important contextual considerations within health care. : Using theoretical frameworks from A. Donabedian (1966), P. M. Wright, T. M. Gardner, and L. M. Moynihan (2003), and B. Schneider, D. B. Smith, and H. W. Goldstein (2000) and review methods adapted from R. Pawson (2006b), we reviewed relevant research from peer-reviewed and other industry-relevant sources to inform our model. The model we developed was then reviewed with a panel of practitioners, including experts in quality and human resource management, to assess the applicability of the model to health care settings. : The resulting conceptual model identified four practice bundles, comprising 14 management practices as well as nine factors influencing adoption and perceived sustainability of these practices. The mechanisms by which these practices influence care outcomes are illustrated using the example of hospital-acquired infections. In addition, limitations of the current evidence base are discussed, and an agenda for future research in health care settings is outlined. : Results may help practitioners better conceptualize management practices as part of a broader system of work practices. This may, in turn, help practitioners to prioritize management improvement efforts more systematically.

  6. Development of remote sensing technology in New Zealand, part 1. Mapping land use and environmental studies in New Zealand, part 2. Indigenous forest assessment, part 3. Seismotectonic, structural, volcanologic and geomorphic study of New Zealand, part 4

    Science.gov (United States)

    Probine, M. C.; Suggate, R. P.; Stirling, I. F.; Mcgreevy, M. G. (Principal Investigator)

    1976-01-01

    The author has identified the following significant results. As part of the tape reformatting process, a simple coded picture output program was developed. This represents Pixel's radiance level by one of a 47 character set on a nonoverprinting line printer. It not only has aided in locating areas for the reformatting process, but has also formed the foundation for a supervised clustering package. This in turn has led to a simplistic but effective thematic mapping package.

  7. Endocrine system: part 1.

    Science.gov (United States)

    Johnstone, Carolyn; Hendry, Charles; Farley, Alistair; McLafferty, Ella

    2014-05-27

    This article, which forms part of the life sciences series and is the first of two articles on the endocrine system, examines the structure and function of the organs of the endocrine system. It is important that nurses understand how the endocrine system works and its role in maintaining health. The role of the endocrine system and the types, actions and control of hormones are explored. The gross structure of the pituitary and thyroid glands are described along with relevant physiology. Several disorders of the thyroid gland are outlined. The second article examines growth hormone, the pancreas and adrenal glands.

  8. Development of an inter-layer solute transport algorithm for SOLTR computer program. Part 1. The algorithm

    International Nuclear Information System (INIS)

    Miller, I.; Roman, K.

    1979-12-01

    In order to perform studies of the influence of regional groundwater flow systems on the long-term performance of potential high-level nuclear waste repositories, it was determined that an adequate computer model would have to consider the full three-dimensional flow system. Golder Associates' SOLTR code, while three-dimensional, has an overly simple algorithm for simulating the passage of radionuclides from one aquifier to another above or below it. Part 1 of this report describes the algorithm developed to provide SOLTR with an improved capability for simulating interaquifer transport

  9. Job sharing. Part 1.

    Science.gov (United States)

    Anderson, K; Forbes, R

    1989-01-01

    This article is the first of a three part series discussing the impact of nurses job sharing at University Hospital, London, Ontario. This first article explores the advantages and disadvantages of job sharing for staff nurses and their supervising nurse manager, as discussed in the literature. The results of a survey conducted on a unit with a large number of job sharing positions, concur with literature findings. The second article will present the evaluation of a pilot project in which two nurses job share a first line managerial position in the Operating Room. The third article will relate the effects of job sharing on women's perceived general well being. Job sharing in all areas, is regarded as a positive experience by both nurse and administrators.

  10. Theoretical and methodological approaches to economic competitiveness (Part I

    Directory of Open Access Journals (Sweden)

    Macari Vadim

    2013-01-01

    Full Text Available The article is based on study of several representative bibliographical sources,it is tried to examine, to order from logical and scientific point of view some of the most common theoretical and methodological understandings of the essence, definition, phenomenon, types, haracteristics and indices of economic competitiveness.

  11. Theoretical and methodological approaches to economic competitiveness (part II

    Directory of Open Access Journals (Sweden)

    Macari Vadim

    2013-02-01

    Full Text Available This article, on the basis of the study of many representative bibliographic sources, examines and tries to order from logical and scientific point of view some of the most common theoretical and methodological treatments of the essence, definition, phenomenon, types, characteristics and indices of economic competitiveness.

  12. THEORETICAL AND METHODOLOGICAL APPROACHES TO ECONOMIC COMPETITIVENESS (Part II

    Directory of Open Access Journals (Sweden)

    Vadim MACARI

    2013-02-01

    Full Text Available This article, on the basis of the study of many representative bibliographic sources, examines and tries to order from logical and scientific point of view some of the most common theoretical and methodological treatments of the essence, definition, phenomenon, types, characteristics and indices of economic competitiveness.

  13. THEORETICAL AND METHODOLOGICAL APPROACHES TO ECONOMIC COMPETITIVENESS (Part I

    Directory of Open Access Journals (Sweden)

    Vadim MACARI

    2013-01-01

    Full Text Available The article is based on study of several representative bibliographical sources,it is tried to examine, to order from logical and scientific point of view some of the most common theoretical and methodological understandings of the essence, definition, phenomenon, types, characteristics and indices of economic competitiveness.

  14. Resilience or Flexibility– A Theoretical Approach on Romanian Development Regions

    Directory of Open Access Journals (Sweden)

    Roxana Voicu – Dorobanțu

    2015-09-01

    Full Text Available The paper describes a theoretical contextualization of flexibility, sustainability, durability and resilience, in the context of the sustainable development goals. The main purpose is to identify the theoretical handles that may be used in the creation of a flexibility indicator. Thus, research questions related to the theoretical differentiation between durable and sustainable, flexible and resilient are answered. Further on, the paper describes the situation of the Romanian regions in terms of development indicators, based on Eurostat data, as a premise for further research on the possibility of their leapfrogging. This work was financially supported through the project “Routes of academic excellence in doctoral and post-doctoral research- REACH” co-financed through the European Social Fund, by Sectoral Operational Programme Human Resources Development 2007-2013, contract no POSDRU/59/1.5/S/137926.

  15. Development of theoretical methodology for large molecules

    International Nuclear Information System (INIS)

    Maggiora, G.M.; Christoffersen, R.E.; Yoffe, J.A.; Petke, J.D.

    1981-01-01

    A major advantage of the use of floating spherical Gaussian or vitals (FSGO) is the extreme rapidity with which the necessary quantum mechanical integrals can be evaluated. This advantage has been exploited in several quantum mechanical procedures for molecular electronic structure calculations, as described below. Several other properties of these functions have also been exploited, and have led to the development of semiclassical point charge and harmonic oscillator models capable of describing first and second order electromagnetic properties and intermolecular forces with reasonable accuracy in all cases and with considerably better accuracy than much more elaborate theoretical procedures in some cases. These applications are also described below. The primary intent of the current paper is to present an overview of some of the uses of FSGOs in the study of molecular electronic structure and properties and to indicate possible directions for future applications. No attempt will be made to include all possible applications. Rather, those applications of interest to the authors have been stressed. Hopefully, this paper will further stimulate the development of additional uses of these remarkable functions

  16. Nuclear cardiology: Part 1

    International Nuclear Information System (INIS)

    Berger, H.J.; Zaret, B.L.

    1981-01-01

    A review of recent developments and future directions in nuclear cardiology is presented. Myocardial perfusion imaging is discussed with special emphasis on thallium-201 methods. Infarct-avid imaging is also discussed with emphasis on technetium-99m labelled in diagnosis, and emission computed tomography is briefly reviewed. In addition, new biologically based radiotracers such as indium-111-labeled blood cells, gallium-67 citrate, and new positron- and gamma-emittng radiotracers are reviewed

  17. Rotary Bed Reactor for Chemical-Looping Combustion with Carbon Capture. Part 1: Reactor Design and Model Development

    KAUST Repository

    Zhao, Zhenlong

    2013-01-17

    Chemical-looping combustion (CLC) is a novel and promising technology for power generation with inherent CO2 capture. Currently, almost all of the research has been focused on developing CLC-based interconnected fluidized-bed reactors. In this two-part series, a new rotary reactor concept for gas-fueled CLC is proposed and analyzed. In part 1, the detailed configuration of the rotary reactor is described. In the reactor, a solid wheel rotates between the fuel and air streams at the reactor inlet and exit. Two purging sectors are used to avoid the mixing between the fuel stream and the air stream. The rotary wheel consists of a large number of channels with copper oxide coated on the inner surface of the channels. The support material is boron nitride, which has high specific heat and thermal conductivity. Gas flows through the reactor at elevated pressure, and it is heated to a high temperature by fuel combustion. Typical design parameters for a thermal capacity of 1 MW have been proposed, and a simplified model is developed to predict the performances of the reactor. The potential drawbacks of the rotary reactor are also discussed. © 2012 American Chemical Society.

  18. US enrichment safeguards program development activities with potential International Atomic Energy Agency safeguards applications. Part 1. Executive summaries

    International Nuclear Information System (INIS)

    Swindle, D.W. Jr.

    1984-07-01

    The most recent progress, results, and plans for future work on the US Enrichment Safeguards Program's principal development activities are summarized. Nineteen development activities are reported that have potential International Atomic Energy Agency (IAEA) safeguards applications. Part 1 presents Executive Summaries for these, each of which includes information on (1) the purpose and scope of the development activity; (2) the potential IAEA safeguards application and/or use if adopted; (3) significant development work, results, and/or conclusions to date; and where appropriate (4) future activities and plans for continued work. Development activities cover: measurement technology for limited-frequency-unannounced-access stategy inspections; integrated data acquisition system; enrichment-monitoring system; load-cell-based weighing system for UF 6 cylinder mass verifications; vapor phase versus liquid phase sampling of UF 6 cylinders; tamper-safing hardware and systems; an alternative approach to IAEA nuclear material balance verifications resulting from intermittent inspections; UF 6 sample bottle enrichment analyzer; crated waste assay monitor; and compact 252 Cf shuffler for UF 6 measurements

  19. Task 9. Deployment of photovoltaic technologies: co-operation with developing countries. Summary of models for the implementation of solar home systems in developing countries - Part 1: Summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-15

    This first part of a two-part report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the implementation of Solar Home systems in developing countries. The objective of Task 9 is to increase the successful deployment of PV systems in developing countries. This summary outlines various models for the implementation of small domestic photovoltaic (PV) systems (Solar Home Systems, SHS) in developing countries. Part 1 of this two-part document discusses three generic models. The second, separate part of the document provides a number of examples demonstrating the models described. This report focuses on the implementation of SHS. However, a considerable amount of the PV market in developing countries is stated as consisting of large systems providing electricity for social services, such as light for schools, mosques, churches, communal centres, refrigeration for health centres and drinking water for communities. It is noted that there are considerable differences between the 'social market' and the 'private market' for SHS. The 'social market' generally consists of large systems but fewer in number. The guide does not cover the detailed technical aspects of a Solar Home System or the issue of recycling old batteries.

  20. Telemetry Standards, Part 1

    Science.gov (United States)

    2015-07-01

    IMAGE FRAME RATE (R-x\\ IFR -n) PRE-TRIGGER FRAMES (R-x\\PTG-n) TOTAL FRAMES (R-x\\TOTF-n) EXPOSURE TIME (R-x\\EXP-n) SENSOR ROTATION (R-x...0” (Single frame). “1” (Multi-frame). “2” (Continuous). Allowed when: When R\\CDT is “IMGIN” IMAGE FRAME RATE R-x\\ IFR -n R/R Ch 10 Status: RO...the settings that the user wishes to modify. Return Value The impact : A partial IHAL <configuration> element containing only the new settings for

  1. Corruption and Economic Development in Nigeria: A Theoretical ...

    African Journals Online (AJOL)

    Corruption and Economic Development in Nigeria: A Theoretical Review. ... By using a theoretical method of analysis, the study reveals that corruption has been a deterrent to economic development in Nigeria. ... Section two discusses the theoretical and conceptual issues in corruption and economic development. Section ...

  2. Optimal Learning in Schools--Theoretical Evidence: Part 2 Updating Piaget

    Science.gov (United States)

    Crossland, John

    2017-01-01

    Part 1 in this four-part series of articles discussed Piaget's theories of learning and development (Crossland, 2016). Part 2 explores how post-Piagetian researchers have addressed criticisms of Piaget's theories by linking recent evidence including that from neuroscience. The outcomes show that good teachers make a difference by implementing…

  3. Aircraft noise prediction program theoretical manual: Rotorcraft System Noise Prediction System (ROTONET), part 4

    Science.gov (United States)

    Weir, Donald S.; Jumper, Stephen J.; Burley, Casey L.; Golub, Robert A.

    1995-01-01

    This document describes the theoretical methods used in the rotorcraft noise prediction system (ROTONET), which is a part of the NASA Aircraft Noise Prediction Program (ANOPP). The ANOPP code consists of an executive, database manager, and prediction modules for jet engine, propeller, and rotor noise. The ROTONET subsystem contains modules for the prediction of rotor airloads and performance with momentum theory and prescribed wake aerodynamics, rotor tone noise with compact chordwise and full-surface solutions to the Ffowcs-Williams-Hawkings equations, semiempirical airfoil broadband noise, and turbulence ingestion broadband noise. Flight dynamics, atmosphere propagation, and noise metric calculations are covered in NASA TM-83199, Parts 1, 2, and 3.

  4. Theoretical Atomic Physics code development II: ACE: Another collisional excitation code

    International Nuclear Information System (INIS)

    Clark, R.E.H.; Abdallah, J. Jr.; Csanak, G.; Mann, J.B.; Cowan, R.D.

    1988-12-01

    A new computer code for calculating collisional excitation data (collision strengths or cross sections) using a variety of models is described. The code uses data generated by the Cowan Atomic Structure code or CATS for the atomic structure. Collisional data are placed on a random access file and can be displayed in a variety of formats using the Theoretical Atomic Physics Code or TAPS. All of these codes are part of the Theoretical Atomic Physics code development effort at Los Alamos. 15 refs., 10 figs., 1 tab

  5. The Dichotic Digits difference Test (DDdT): Development, Normative Data, and Test-Retest Reliability Studies Part 1.

    Science.gov (United States)

    Cameron, Sharon; Glyde, Helen; Dillon, Harvey; Whitfield, Jessica; Seymour, John

    2016-06-01

    The dichotic digits test is one of the most widely used assessment tools for central auditory processing disorder. However, questions remain concerning the impact of cognitive factors on test results. To develop the Dichotic Digits difference Test (DDdT), an assessment tool that could differentiate children with cognitive deficits from children with genuine dichotic deficits based on differential test results. The DDdT consists of four subtests: dichotic free recall (FR), dichotic directed left ear (DLE), dichotic directed right ear (DRE), and diotic. Scores for six conditions are calculated (FR left ear [LE], FR right ear [RE], and FR total, as well as DLE, DRE, and diotic). Scores for four difference measures are also calculated: dichotic advantage, right-ear advantage (REA) FR, REA directed, and attention advantage. Experiment 1 involved development of the DDdT, including error rate analysis. Experiment 2 involved collection of normative and test-retest reliability data. Twenty adults (aged 25 yr 10 mo to 50 yr 7 mo, mean 36 yr 4 mo) took part in the development study; 62 normal-hearing, typically developing, primary-school children (aged 7 yr 1 mo to 11 yr 11 mo, mean 9 yr 4 mo) and 10 adults (aged 25 yr 0 mo to 51 yr 6 mo, mean 34 yr 10 mo) took part in the normative and test-retest reliability study. In Experiment 1, error rate analysis was conducted on the 36 digit-pair combinations of the DDdT. Normative data collected in Experiment 2 were arcsine transformed to achieve a distribution that was closer to a normal distribution and z-scores calculated. Pearson product-moment correlations were used to determine the strength of relationships between DDdT conditions. The development study revealed no significant differences in the adult population between test and retest on any DDdT condition. Error rates on 36 digit pairs ranged from 1.5% to 16.7%. The most and the least error-prone digits were removed before commencement of the normative data study, leaving 25

  6. Comparative study of a novel liquid–vapour separator incorporated gravitational loop heat pipe against the conventional gravitational straight and loop heat pipes – Part I: Conceptual development and theoretical analyses

    International Nuclear Information System (INIS)

    Zhang, Xingxing; Shen, Jingchun; He, Wei; Xu, Peng; Zhao, Xudong; Tan, Junyi

    2015-01-01

    Highlights: • We proposed a liquid–vapour separator incorporated gravity-assisted loop heat pipe. • Comparative study of the thermal performance of three heat pipes were conducted. • A dedicated steady-state thermal model of three heat pipes were developed. • Optimum operational settings of the new loop heat pipe were recommended. • The new loop heat pipe could achieve a significantly enhanced heat transfer effect. - Abstract: Aim of the paper is to investigate the thermal performance of a novel liquid–vapour separator incorporated gravity-assisted loop heat pipe (GALHP) (T1), against a conventional GALHP (T2) and a gravitational straight heat pipe (T3), from the conceptual and theoretical aspects. This involved a dedicated conceptual formation, thermo-fluid analyses, and computer modelling and results discussion. The innovative feature of the new GALHP lies in the integration of a dedicated liquid–vapour separator on top of its evaporator section, which removes the potential entrainment between the heat pipe liquid and vapour flows and meanwhile, resolves the inherent ‘dry-out’ problem exhibited in the conventional GALHP. Based on this recognised novelty, a dedicated steady-state thermal model covering the mass continuity, energy conservation and Darcy equations was established. The model was operated at different sets of conditions, thus generating the temperature/pressure contours of the vapour and liquid flows at the evaporator section, the overall thermal resistance, the effective thermal conductivity, and the flow resistances across entire loop. Comparison among these results led to determination of the optimum operational settings of the new GALHP and assessment of the heat-transfer enhancement rate of the new GALHP against the conventional heat pipes. It was suggested that the overall thermal resistance of the three heat pipes (T1, T2, and T3) were 0.10 °C/W, 0.49 °C/W and 0.22 °C/W, while their effective thermal conductivities were

  7. Sodium fires: French strategy - theoretical and experimental developments

    International Nuclear Information System (INIS)

    Descombes; Thomann; Malet, J.C.; Rzekiecki, R.

    1985-01-01

    After a description of the needs relating to LMFBR safety analysis and design in terms of prevention, detection and protection, the French strategy concerning sodium fires it presented. It includes theoretical developments supported with relevant experimental program, to allow reliable calculations and predictions for safety and design. The following physical phenomena are detailed: (1) sodium fire (mechanical and thermal effects); (2) sodium-structures interactions; (3) aerosols behavior

  8. Transport at basin scales: 1. Theoretical framework

    Directory of Open Access Journals (Sweden)

    A. Rinaldo

    2006-01-01

    Full Text Available The paper describes the theoretical framework for a class of general continuous models of the hydrologic response including both flow and transport of reactive solutes. The approach orders theoretical results appeared in disparate fields into a coherent theoretical framework for both hydrologic flow and transport. In this paper we focus on the Lagrangian description of the carrier hydrologic runoff and of the processes embedding catchment-scale generation and transport of matter carried by runoff. The former defines travel time distributions, while the latter defines lifetime distributions, here thought of as contact times between mobile and immobile phases. Contact times are assumed to control mass transfer in a well-mixed approximation, appropriate in cases, like in basin-scale transport phenomena, where the characteristic size of the injection areas is much larger than that of heterogeneous features. As a result, we define general mass-response functions of catchments which extend to transport of matter geomorphologic theories of the hydrologic response. A set of examples is provided to clarify the theoretical results towards a computational framework for generalized applications, described in a companion paper.

  9. Optimal Learning in Schools--Theoretical Evidence: Part 3 Individual Differences

    Science.gov (United States)

    Crossland, John

    2017-01-01

    Parts 1 and 2 in this four-part series of articles (Crossland, 2016, 2017) discussed the recent research from neuroscience linked to concepts from cognitive development that brought Piaget's theories into the 21st century and showed the most effective provision towards more optimal learning strategies. Then the discussion moved onto Demetriou's…

  10. Development of a wind converter and investigation of its operational function. Part 1: Technical description of the wind energy converter

    Science.gov (United States)

    Molly, J. P.; Steinheber, R.

    1982-11-01

    A 10 kW wind energy converter was developed by using as far possible standard serial production parts. The design criteria and the description of the essential machinery components of the MODA 10 wind energy converter are discussed. For some special load cases the safety calculation of the important components is shown. The blade control system which qualified for small wind energy converters, is explained. Weight and cost of the MODA 10 are considered.

  11. System theoretic approach to sustainable development problems

    Directory of Open Access Journals (Sweden)

    Batanović Vladan

    2011-01-01

    Full Text Available This paper shows that the concepts and methodology contained in the system theory and operations research are suitable for application in the planning and control of the sustainable development. The sustainable development problems can be represented using the state space concepts, such as the transition of system, from the given initial state to the final state. It is shown that sustainable development represents a specific control problem. The peculiarity of the sustainable development is that the target is to keep the system in the prescribed feasible region of the state space. The analysis of planning and control problems of sustainable development has also shown that methods developed in the operations research area, such as multicriteria optimization, dynamic processes simulation, non-conventional treatment of uncertainty etc. are adequate, exact base, suitable for resolution of these problems.

  12. Privatization and Financial Market Development: Theoretical Issues

    OpenAIRE

    Gabriella Chiesa; Giovanna Nicodano

    2003-01-01

    Stock market capitalization in developed countries grew while massive privatization plans were in progress. It is however possible that stock market development would have occurred anyway. Below we identify features that are specific to share-issue privatizations (SIPs) and should a priori impact on market liquidity and market size. A positive correlation between such features and market development in a cross section of countries would support the claim that certain types of SIPs contribute ...

  13. Franchise business development model : theoretical considerations

    OpenAIRE

    Kavaliauskė, Monika; Vaiginienė, Erika

    2011-01-01

    Franchising is not a popular business development form in Lithuania. Only 0.02% of all Lithuanian companies use franchising for business development, while in most of the developed countries franchise is recognized as a convenient business expansion form. So, what factors determine such differences in the use of franchising? Analysis of related literature showed, that mainly researchers analyse some aspects of franchising, however there is no systematized analysis which covers all the main fr...

  14. Franchise Business Development Model: Theoretical Considerations

    OpenAIRE

    Kavaliauskė, Monika; Vaiginienė, Erika

    2011-01-01

    Franchising is not a popular business development form in Lithuania. Only 0.02% of all Lithuanian companies use franchising for business development, while in most of the developed countries franchise is recognized as a convenient business expansion form. So, what factors determine such differences in the use of franchising? Analysis of related literature showed, that mainly researchers analyse some aspects of franchising, however there is no systematized analysis which covers all the main fr...

  15. Theoretical Guidelines for a Psychology of Rural Development

    NARCIS (Netherlands)

    Landini, F.; Long, N.; Leeuwis, C.; Murtagh, S.

    2014-01-01

    Many processes related to rural development have a strong psychosocial component. Yet, there exists no specific psychosocial theoretical framework for addressing them. In this paper, then, we present a set of theoretical guidelines for analysing rural development processes and interventions from the

  16. Developing a theoretical framework for complex community-based interventions.

    Science.gov (United States)

    Angeles, Ricardo N; Dolovich, Lisa; Kaczorowski, Janusz; Thabane, Lehana

    2014-01-01

    Applying existing theories to research, in the form of a theoretical framework, is necessary to advance knowledge from what is already known toward the next steps to be taken. This article proposes a guide on how to develop a theoretical framework for complex community-based interventions using the Cardiovascular Health Awareness Program as an example. Developing a theoretical framework starts with identifying the intervention's essential elements. Subsequent steps include the following: (a) identifying and defining the different variables (independent, dependent, mediating/intervening, moderating, and control); (b) postulating mechanisms how the independent variables will lead to the dependent variables; (c) identifying existing theoretical models supporting the theoretical framework under development; (d) scripting the theoretical framework into a figure or sets of statements as a series of hypotheses, if/then logic statements, or a visual model; (e) content and face validation of the theoretical framework; and (f) revising the theoretical framework. In our example, we combined the "diffusion of innovation theory" and the "health belief model" to develop our framework. Using the Cardiovascular Health Awareness Program as the model, we demonstrated a stepwise process of developing a theoretical framework. The challenges encountered are described, and an overview of the strategies employed to overcome these challenges is presented.

  17. PACE. A Program for Acquiring Competence in Entrepreneurship. Part II: Becoming an Entrepreneur. Unit A: Developing the Business Plan. Research and Development Series No. 194 B-1.

    Science.gov (United States)

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the seven instructional units in Part II is establishing a business. Unit A focuses on developing a business…

  18. White Paper: Interventional MRI: Current Status and Potential for Development Considering Economic Perspectives, Part 1: General Application.

    Science.gov (United States)

    Barkhausen, Jörg; Kahn, Thomas; Krombach, Gabriele A; Kuhl, Christiane K; Lotz, Joachim; Maintz, David; Ricke, Jens; Schönberg, Stefan O; Vogl, Thomas J; Wacker, Frank K

    2017-07-01

    children with congenital heart defects and for atrial ablation at individual centers. Greater application can be expected in the future.. Citation format · Barkhausen J, Kahn T, Krombach GA et al. White Paper: Interventional MRI: Current Status and Potential for Development Considering Economic Perspectives, Part 1: General Application. Fortschr Röntgenstr 2017; 189: 611 - 623. © Georg Thieme Verlag KG Stuttgart · New York.

  19. Theoretical Perspectives on Gender and Development

    International Development Research Centre (IDRC) Digital Library (Canada)

    This will foster effective communication among development agents and result in a ..... to the "identity politics" which has grounded Western thought and public life. ..... of state enterprises, and reform of the social sector to make it cost-effective.

  20. Theoretical aspects of neutron interaction: part 1 - interaction programme for ibm 7094, part 2 - the shielding sub-programme, part 3 - listing of the programme; Aspects theoriques de l'interaction neutronique: annexe 1 - programme interaction pour ibm 7094 - annexe 2 - sous programme ombre - annexe 3 - liste du programme

    Energy Technology Data Exchange (ETDEWEB)

    Moret-Bailly, J; Penet, F; Spinelli, J C [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1965-07-01

    Part I. Methods are described for obtaining the equations for a system of elements containing fissile matter: a) by using the balance after fission, b) by using the balance before fission, c) by the evolution equations. All these methods lead to equivalent matrices whose greatest proper value is the multiplication coefficient for the system K. It is shown how to calculate K. From this it is possible to deduce the rules which generalize the criterion for the bounded solid angle. An IBM 7094 programme applies this theory to the calculation of the installations made up of a maximum of 500 elements. It calculates the effective values of K, the leaks, the solid angles and then K. Part. II. This sub-programme calculates the shielding between the elements. (authors) [French] Sommaire, - Annexe I. On expose les methodes permettant d'obtenir les equations d'un systeme d'elements contenant de la matiere fissile: a) par le bilan apres fission, b) par le bilan avant fission, c) par les equations d'evolution. Toutes ces methodes conduisent a des matrices equivalentes dont la plus grande valeur propre est le coefficient de multiplication de l'ensemble K. On montre comment K se calcule. On en deduit des regles qui generalisent le critere de l'angle solide limite. Un programme pour IBM 7094 applique cette theorie au calcul des installations comportant au maximum 500 elements. II calcule les k effectifs, les fuites, les angles solides puis K. Annexe II. Ce sous-programme calcule les ombres entre les elements. (auteurs)

  1. Theoretical Atomic Physics code development IV: LINES, A code for computing atomic line spectra

    International Nuclear Information System (INIS)

    Abdallah, J. Jr.; Clark, R.E.H.

    1988-12-01

    A new computer program, LINES, has been developed for simulating atomic line emission and absorption spectra using the accurate fine structure energy levels and transition strengths calculated by the (CATS) Cowan Atomic Structure code. Population distributions for the ion stages are obtained in LINES by using the Local Thermodynamic Equilibrium (LTE) model. LINES is also useful for displaying the pertinent atomic data generated by CATS. This report describes the use of LINES. Both CATS and LINES are part of the Theoretical Atomic PhysicS (TAPS) code development effort at Los Alamos. 11 refs., 9 figs., 1 tab

  2. Theoretical Overview on Recent Developments in Transverse Spin Physics

    International Nuclear Information System (INIS)

    Yuan, Feng

    2009-01-01

    Transverse-spin physics has been very active and rapidly developing in the last few years. In this talk, I will briefly summarize recent theoretical developments, focusing on the associated QCD dynamics in transverse spin physics

  3. Theoretical development in the context of nursing

    DEFF Research Database (Denmark)

    Hoeck, Bente; Delmar, Charlotte

    2018-01-01

    are treated as equals. We suggest a framework for the development of nursing knowledge based on a caring-ethical practice, a theory on life phenomena in suffering and relationship-based nursing, and thereby, we may be able to help patients to be cured, to recover, to be alleviated or comforted when suffering.......This article is about nursing theories, the development of nursing knowledge and the underlying, hidden epistemology. The current technical-economical rationality in society and health care calls for a specific kind of knowledge based on a traditional Western, Socratic view of science. This has...... an immense influence on the development of nursing knowledge. The purpose of the article was therefore to discuss the hidden epistemology of nursing knowledge and theories seen in a broad historical context and point to an alternative epistemology for a future context. It is a question about which nursing...

  4. Theoretical Perspectives on Gender and Development | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    English · Français ... It is designed for use in both formal and non-formal educational settings. The editors. Jane L. Parpart is a professor of history, women's studies, and international development ... Professor Connelly is the author of Last Hired, First Fired: Women and the Canadian Work Force, coauthor of Women and the ...

  5. Understanding quantitative research: part 1.

    Science.gov (United States)

    Hoe, Juanita; Hoare, Zoë

    This article, which is the first in a two-part series, provides an introduction to understanding quantitative research, basic statistics and terminology used in research articles. Critical appraisal of research articles is essential to ensure that nurses remain up to date with evidence-based practice to provide consistent and high-quality nursing care. This article focuses on developing critical appraisal skills and understanding the use and implications of different quantitative approaches to research. Part two of this article will focus on explaining common statistical terms and the presentation of statistical data in quantitative research.

  6. Geomathematics theoretical foundations, applications and future developments

    CERN Document Server

    Agterberg, Frits

    2014-01-01

    This book provides a wealth of geomathematical case history studies performed by the author during his career at the Ministry of Natural Resources Canada, Geological Survey of Canada (NRCan-GSC). Several of the techniques newly developed by the author and colleagues that are described in this book have become widely adopted, not only for further research by geomathematical colleagues, but by government organizations and industry worldwide. These include Weights-of-Evidence modelling, mineral resource estimation technology, trend surface analysis, automatic stratigraphic correlation and nonlinear geochemical exploration methods. The author has developed maximum likelihood methodology and spline-fitting techniques for the construction of the international numerical geologic timescale. He has introduced the application of new theory of fractals and multifractals in the geostatistical evaluation of regional mineral resources and ore reserves and to study the spatial distribution of metals in rocks. The book also ...

  7. Theoretical Developments in QCD Jet Energy Loss

    Energy Technology Data Exchange (ETDEWEB)

    Mehtar-Tani, Yacine

    2016-12-15

    We review the recent developments in the theory of jet-quenching. First, we analyze the coherent vacuum cascade and incoherent medium-induced cascade separately. We then discuss the interplay between the two kinds of cascade and the resulting partial decoherence of the inner jet structure. Finally, we report on recent calculations of higher-order corrections. In particular, the dominant radiative corrections to jet observables that yield the renormalization of the jet-quenching parameter are addressed.

  8. Theoretical Perspectives on Gender and Development | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Elle a dirigé avec Marianne Marchand la publication d'une collection intitulée Feminism/Postmodernism/Development et elle effectue des recherches et enseigne sur les questions d'égalité entre les sexes et la théorie du développement, ainsi que sur la grande question de l'égalité entre les sexes dans la création d'une ...

  9. Subvisible (2-100 μm) Particle Analysis During Biotherapeutic Drug Product Development: Part 1, Considerations and Strategy.

    Science.gov (United States)

    Narhi, Linda O; Corvari, Vincent; Ripple, Dean C; Afonina, Nataliya; Cecchini, Irene; Defelippis, Michael R; Garidel, Patrick; Herre, Andrea; Koulov, Atanas V; Lubiniecki, Tony; Mahler, Hanns-Christian; Mangiagalli, Paolo; Nesta, Douglas; Perez-Ramirez, Bernardo; Polozova, Alla; Rossi, Mara; Schmidt, Roland; Simler, Robert; Singh, Satish; Spitznagel, Thomas M; Weiskopf, Andrew; Wuchner, Klaus

    2015-06-01

    Measurement and characterization of subvisible particles (defined here as those ranging in size from 2 to 100 μm), including proteinaceous and nonproteinaceous particles, is an important part of every stage of protein therapeutic development. The tools used and the ways in which the information generated is applied depends on the particular product development stage, the amount of material, and the time available for the analysis. In order to compare results across laboratories and products, it is important to harmonize nomenclature, experimental protocols, data analysis, and interpretation. In this manuscript on perspectives on subvisible particles in protein therapeutic drug products, we focus on the tools available for detection, characterization, and quantification of these species and the strategy around their application. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  10. Manufacturing technologies for photovoltaics and possible means of their development in Russia (Review). Part 1: General approach to the development of photoelectric converters and basic silicon technologies

    Science.gov (United States)

    Tarasenko, A. B.; Popel', O. S.

    2015-11-01

    The state and key tendencies of the development of basic technologies for manufacture of photoelectric converters (PECs) in the world are considered, and their advantages and disadvantages are discussed. The first part of the review gives short information on the development of photovoltaics in the world and planes of the development of solar power plants in Russia. Total power of photoelectric plants operating in various countries in 2015 exceeded 150 GW and increased in the last ten years with a rate of approximately 50% per year. Russia made important state decisions on the support of the development of renewable power engineering and developed mechanisms, which were attractive for business, on the stimulation of building of the network of solar power plants with a total power to 1.5 GW in the country to 2020. At the same time, the rigid demands are made with respect to the localization of the production of components of these plants that opens new abilities for the development of the domestic production of photovoltaics manufacture. Data on the efficiency of PECs of various types that are attained in the leading laboratories of the world are given. Particular emphasis has been placed on the consideration of basic silicon technologies of PEC manufacture, which had the widest commercial application. The basic methods for production of polycrystalline silicon and making single-crystal and multicrystal silicon are described. Fundamentals of making techniques for plates, PECs, and photoelectric modules based on single-crystal and polycrystalline silicon are considered. The second part will be devoted to modifications of manufacturing techniques for photoelectric converters, enhancement methods for contact structures, and recommendations of authors with respect to the choice of prospective technologies for the expansion of PEC production in Russia. It will involve formulations and substantiations of the most promising lines of the development of photoelectric

  11. DESIGNING OF DEVELOPED SURFACES OF COMPLEX PARTS

    Directory of Open Access Journals (Sweden)

    S. S. Tyshchenko

    2017-04-01

    Full Text Available Purpose. The paper focuses on ensuring the rational choice of parameters of the mating surfaces of parts when designing process equipment based on the methods of artificial intelligence. Methodology. The paper considers the geometric model of a ruled developed surface, the conditions of existence of such a surface and provides a generalized algorithm for surface plotting regardless of the type of the working element or the machine-building product. One of the most common technical surfaces are the ruled ones, among which a special position is occupied by developed surfaces (thanks to their differential-parametric properties: surface tangent plane is n contact along the rectilinear generator and does not change its position in space when changing the point of contact; surfaces can be produced by bending sheet metal. These provisions enable a product manufacturer to save significant material and energy means, therefore, the development of geometric models of such surfaces is an important task. Findings. We analyzed the geometrical model of the developed surface which is incident to two guides. Experimental studies have shown the applicationprospectivity of semi-digger moldboards on moldboard plows, particularly on the double-deck ones. Taking into account the operating speed of the plow 2.8 m/s, the plant residues plowing percentage for plow with semi-digger moldboards is 98.9%, and with the digger ones – 96.1%. Originality. According to results: 1 the approaches to solving the problem of recognition of wear conditions of the tested interface, depicted by its conceptual model, were elaborated; 2 the corresponding algorithms of the computational procedures were built; 3 the mathematical model that determines the effect of the parameters of the contacting surfaces on their performance properties – linear wear rate during the normal wear and tear was developed; 4 for this model the theoretical prerequisite of use for the random mating study were

  12. Update on rheumatology: part 1.

    Science.gov (United States)

    Neal-Boylan, Leslie

    2009-05-01

    There are many rheumatic diseases. Part 1 of this 2 part series on rheumatology presented a few of those most commonly seen in the community. Home health clinicians can be helpful in managing these diseases and preventing progression by watching for new symptoms or acute attacks of pain or disability, ensuring that patients take their medications appropriately, reminding patients to see their rheumatology providers and have their lab work done regularly, and reporting adverse effects to medications promptly. Additionally, as with most home health patients, an interdisciplinary approach that includes physical and occupational therapy, social work, nursing, nutrition, and other disciplines as needed should be implemented so that all patient needs are met and the patient is discharged at the highest level of self-care that is possible. Part 2 of this series will discuss the care of the patient with rheumatic disease at home and will provide a more in-depth look at lab diagnosis of rheumatic diseases.

  13. Theoretical models for development competence of health protection and promotion

    Directory of Open Access Journals (Sweden)

    Cesnaviciene J.

    2014-01-01

    Full Text Available The competence of health protection and promotion are mentioned in various legislative documents that regulate areas of education and health policy. The researches on health conditions of Lithuania Country's population disclosed the deteriorating health status of the society, even of the children. It has also been found that the focus on health education is not adequate. The number of National and International health programmes have been realized and educational methodological tools prepared in Lithuania, however the insufficient attention to the health promotion models is been noticed. The objectiveof this article is to discuss the theoretical models used in health education field. The questions to be answered: what theoretical models are used in order to development competence of health protection and promotion? Who does employ particular models? What are the advantages of various models? What conceptions unite and characterize theoretical models? The analysis of scientific literature revealed the number of diverse health promotion model; however none of them is dominant. Some of the models focus on intrapersonal, others on interpersonal or community level but in general they can be distinguished as cognitive – behavioural models which are characterized by three main conceptions: 1 the healthy living is determined by the perceived health related knowledge: what is known and understood would influence the behaviour; 2 the knowledge in healthy living field is essential but insufficient condition for behaviour change; 3 the great influence to healthy living life style is done by perception, motivation, skills and habits as well as social environment. These are the components that are typical to all theoretical models and that reflect the hole of the conditions influencing healthy living.

  14. Developments on the European energy market. Part 1. Natural gas supply. Extra import covers growing natural gas demand in Europe

    International Nuclear Information System (INIS)

    Van Gelder, J.W.

    2000-01-01

    This first part of a series on developments in the European gas market features the growth in gas supply. 35% of the gas demand must be covered from sources outside Europe. For the future additional imports are required from countries such as the Russian Federation, Algeria and Nigeria. Over the next few years the artificial link between ga and oil prices will disappear, bringing the gas price to a structurally lower level. It will be of crucial importance that gas suppliers will not be able to form cartels to keep prices high. All competing projects will curb price increases on the European market, but will definitely result in more freedom of choice for European natural gas consumers

  15. Prompt radiation activation analysis, (1) Theoretical study

    International Nuclear Information System (INIS)

    EL Barouni, A. M.; Araddad, S. Y.; Mosbah, D. S.; Elfakhri, S. M.; Rateb, J. M.; Benghzail, M. A.

    2004-01-01

    The measurement of the prompt γ following neutron capture in the reaction has been extensively developed. In this method the gamma-ray intensity is depended only upon the radiative capture cross-section and not upon the half-life of the product nucleus. The prompt gamma-ray activation analysis method stems from the radiative capture process which results in the decay of the compound nucleus by the emission of characteristic gamma radiation, either as a single photon with kinetic energy equal to the excitation energy less the recoil energy or, more likely, by a cascade of two or more photons with the same energy. The equations and the computer program required to calculate the yield, the intensity and the K χ emission probability per disintegration, are given in this study.(author)

  16. A statistical rain attenuation prediction model with application to the advanced communication technology satellite project. Part 2: Theoretical development of a dynamic model and application to rain fade durations and tolerable control delays for fade countermeasures

    Science.gov (United States)

    Manning, Robert M.

    1987-01-01

    A dynamic rain attenuation prediction model is developed for use in obtaining the temporal characteristics, on time scales of minutes or hours, of satellite communication link availability. Analagous to the associated static rain attenuation model, which yields yearly attenuation predictions, this dynamic model is applicable at any location in the world that is characterized by the static rain attenuation statistics peculiar to the geometry of the satellite link and the rain statistics of the location. Such statistics are calculated by employing the formalism of Part I of this report. In fact, the dynamic model presented here is an extension of the static model and reduces to the static model in the appropriate limit. By assuming that rain attenuation is dynamically described by a first-order stochastic differential equation in time and that this random attenuation process is a Markov process, an expression for the associated transition probability is obtained by solving the related forward Kolmogorov equation. This transition probability is then used to obtain such temporal rain attenuation statistics as attenuation durations and allowable attenuation margins versus control system delay.

  17. Development of an Evidence-Based Calibration Methodology Dedicated to Energy Audit of Office Buildings. Part 1: Methodology and Modeling.

    OpenAIRE

    Bertagnolio, Stéphane; Andre, Philippe

    2010-01-01

    1 Introduction To promote improvements in the HVAC installations of existing buildings, the article 9 of the EPBD directive establishes mandatory audits and inspections of air-conditioning systems. The development of auditing tools and procedures and the training of future auditors are the main objectives of the HARMONAC project launched in 2007. Four audit stages are generally distinguished: benchmarking, inspection, detailed audit and investment grade audit. Answering the questions en...

  18. Proceedings of NUCLEAR 2016 the 9th annual international conference on sustainable development through nuclear research and education. Part 1/3

    International Nuclear Information System (INIS)

    Paraschiv, Irina Maria

    2016-01-01

    The Proceedings of the NUCLEAR 2016 international conference on sustainable development through nuclear research and education held at INR-Pitesti on May, 18-20, contain 81 communications presented in two plenary sessions and three sections addressing the themes of Nuclear energy, Environmental protection and Sustainable development. This section (Part 1/3) are addressing the following items: Section 1.1 Nuclear safety and severe accidents (6 papers); Section 1.2 Nuclear reactors and gen. IV (7 papers); Section 1.3 Nuclear technology and materials (29 papers); These papers are presented as abstracts in 'Nuclear 2016 - Book of Abstracts', separately processed

  19. Nuclear medicine. 1 part. Manual

    International Nuclear Information System (INIS)

    Shlygina, O.E.; Borisenko, A.R.

    2006-01-01

    Current manual is urged to give wide-scale readers a submission on a key principles and methods of nuclear medicine, and it opportunities and restrictions in diagnostics and treatment of different diseases. Nuclear medicine is differing first of all by combination of diverse knowledge fields: special knowledge of a doctor, knowledge of physical processes bases, related with radiation, grounds of radiopharmaceutics, dosimetry. In the base of the book the 5th edition of 'Nuclear medicine' manual in 2 parts of German authors - Schicha, G.; Schober, O. is applied. In the book publishing the stuff of the Institute of Nuclear Physics of the National Nuclear Center of Republic of Kazakhstan has been worked. Modifications undergo practically all chapters: especially the second one, forth and sixth was enlarged. The 1 part of the book was published due to support of IAEA within the Technical cooperation project 'Implementation of Nuclear Medicine and Biophysics Center' (KAZ/6/007). The manual second part - devoted to applications of nuclear medicine methods for diagnostics and treatment - will be published in 2007

  20. Ray-tracing toroidal axisymmetric devices. 1. theoretical analysis

    International Nuclear Information System (INIS)

    Cardinali, A.; Brambilla, M.

    1981-06-01

    Ray tracing technique for lower hybrid waves is used to obtain informations about accessibility, power deposition profiles and eventually electric field distribution. In the first part a critical discussion to establish the meaning and validity of this technique is presented, while in the second part of this work applications to small and to large, fat tokamaks are presented, which support and explain the theoretical arguments

  1. Theoretical aspect of the development of 'corporate social responsibility' concept

    OpenAIRE

    Milanović, Vesna M.; Bučalina, Andrea D.

    2013-01-01

    This paper presents a theoretical aspect of the development of 'corporate social responsibility' concept from the beginning of the 20th century to the present day, with the focus on the following periods: up to 1950, between 1950 an 1970, from 1970 to 1990 and from 1990 to now. We employed historical approach. We had an insight into the results of theoretical research on 'corporate social responsibility' concept, which were mostly presented in scientific papers in the English language. The ab...

  2. Theoretical development of atomic structure: Past, present and future

    International Nuclear Information System (INIS)

    Tiwary, S.N.

    1994-11-01

    Theoretical development of atomic structure is briefly discussed. The role of correlation, relativity, quantum electrodynamic (QED), finite nuclear size (FNS) and parity nonconservation (PNC) in high precision theoretical investigation of properties of atomic and ionic systems is demonstrated. At present, we do not have a comprehensive and practical atomic structure theory which accounts all these physical effects on an equal footing. Suggestions are made for future directions. (author). 108 refs, 5 figs, 9 tabs

  3. Transition of the Swiss Phosphorus System towards a Circular Economy—Part 1: Current State and Historical Developments

    Directory of Open Access Journals (Sweden)

    Jonas Mehr

    2018-05-01

    Full Text Available Current phosphorus (P use in European countries is highly dependent on mineral P imports and not sustainably managed. In order to identify and implement measures for sustainable P management, a comprehensive understanding of national P flows and stocks and their temporal dynamics is essential. We conduct a substance flow analysis (SFA of the Swiss P system of the year 2015, and study the dynamics of the national P system by looking into its development since 1989. Furthermore, we investigate how political-legislative interventions affected the P system during this period. The results show that between 1989 and 2015, the P efficiency in Swiss agriculture increased from 59% to 94%, mainly due to a considerable reduction of fertilization in the agricultural subsystem. At the same time, Switzerland's P import dependency decreased from 33% to 24% between 1989 and 2002 because of a reduction of mineral fertilizer import and use. Between 2002 and 2015, the import dependency stagnated because further improvements in P use efficiency in agriculture were outweighed by a decrease of P recycling and an increase of P losses in the waste management system. By embedding these temporal dynamics in their political-legislative context, we found that top-down interventions such as incentives for a balanced nutrient budget in agriculture, restrictions of the use of animal by-products in the agri-food system or the ban of direct sewage sludge recycling in agriculture significantly affected and shaped the national P system. Our analysis provides profound quantitative and qualitative insights into past and present P management in Switzerland and is followed by part 2 of the paper, where we analyze possible future pathways of P management.

  4. Development of methods for theoretical analysis of nuclear reactors (Phase II), I-V, Part IV, Fuel depletion; Razrada metoda teorijske analize nuklearnih reaktora (II faza), I-V, IV Deo, Promena izotopnog sastava goriva

    Energy Technology Data Exchange (ETDEWEB)

    Pop-Jordanov, J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

    1962-10-15

    This report includes the analysis of plutonium isotopes from U{sup 238} depletion chain. Two theoretical approaches for solving the depletion of fuel are shown. One results in the system of differential equations that can be solved only by using electronic calculators and the second, Machinari-Goto method enables obtaining analytical equations for approximative values of particular nuclei. In addition, differential equations are given for different approximation levels in calculating Pu {sup 239}, as well as relations between the released energy and irradiation. Ova faza obuhvata analizu stvaranja izotopa plutonijuma u lancu U{sup 238}. Prikazana su dva teorijska pristupa resavanju problema 'konverzije goriva', jedan dovodi do sistema diferecijalnih jednacina za cije je resavanje neophodno koriscenje elektronskih racunskih masina, i drugi, Machinari-Goto metod koji omogucava da se dobiju analiticki izrazi vrednosti aproksimacije pojedinih jezgara. Osim toga date su diferencijalne jednacine raznih stepena aproksimacije u racunanju Pu {sup 239}, kao i veze izmedju oslobodjene energije i ozracivanja.

  5. Development of a new assessment tool for cervical myelopathy using hand-tracking sensor: Part 1: validity and reliability.

    Science.gov (United States)

    Alagha, M Abdulhadi; Alagha, Mahmoud A; Dunstan, Eleanor; Sperwer, Olaf; Timmins, Kate A; Boszczyk, Bronek M

    2017-04-01

    To assess the reliability and validity of a hand motion sensor, Leap Motion Controller (LMC), in the 15-s hand grip-and-release test, as compared against human inspection of an external digital camera recording. Fifty healthy participants were asked to fully grip-and-release their dominant hand as rapidly as possible for two trials with a 10-min rest in-between, while wearing a non-metal wrist splint. Each test lasted for 15 s, and a digital camera was used to film the anterolateral side of the hand on the first test. Three assessors counted the frequency of grip-and-release (G-R) cycles independently and in a blinded fashion. The average mean of the three was compared with that measured by LMC using the Bland-Altman method. Test-retest reliability was examined by comparing the two 15-s tests. The mean number of G-R cycles recorded was: 47.8 ± 6.4 (test 1, video observer); 47.7 ± 6.5 (test 1, LMC); and 50.2 ± 6.5 (test 2, LMC). Bland-Altman indicated good agreement, with a low bias (0.15 cycles) and narrow limits of agreement. The ICC showed high inter-rater agreement and the coefficient of repeatability for the number of cycles was ±5.393, with a mean bias of 3.63. LMC appears to be valid and reliable in the 15-s grip-and-release test. This serves as a first step towards the development of an objective myelopathy assessment device and platform for the assessment of neuromotor hand function in general. Further assessment in a clinical setting and to gauge healthy benchmark values is warranted.

  6. Hearing loss prevention for carpenters: Part 1 - Using health communication and health promotion models to develop training that works

    Directory of Open Access Journals (Sweden)

    Carol Merry Stephenson

    2011-01-01

    Full Text Available In phase 1 of a large multiyear effort, health communication and health promotion models were used to develop a comprehensive hearing loss prevention training program for carpenters. Additionally, a survey was designed to be used as an evaluation instrument. The models informed an iterative research process in which the authors used key informant interviews, focus groups, and early versions of the survey tool to identify critical issues expected to be relevant to the success of the hearing loss prevention training. Commonly held attitudes and beliefs associated with occupational noise exposure and hearing losses, as well as issues associated with the use or non-use of hearing protectors, were identified. The training program was then specifically constructed to positively shape attitudes, beliefs, and behavioral intentions associated with healthy hearing behaviors - especially those associated with appropriate hearing protector use. The goal was to directly address the key issues and overcome the barriers identified during the formative research phase. The survey was finalized using factor analysis methods and repeated pilot testing. It was designed to be used with the training as an evaluation tool and thus could indicate changes over time in attitudes, beliefs, and behavioral intentions regarding hearing loss prevention. Finally, the training program was fine tuned with industry participation so that its delivery would integrate seamlessly into the existing health and safety training provided to apprentice carpenters. In phase 2, reported elsewhere in this volume, the training program and the survey were tested through a demonstration project at two sites.

  7. Transactive System: Part I: Theoretical Underpinnings of Payoff Functions, Control Decisions, Information Privacy, and Solution Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sun, Y. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Marinovici, Laurentiu D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2018-01-17

    new transactive energy system design with demonstrable guarantees on stability and performance. Specifically, the goals are to (1) establish a theoretical basis for evaluating the performance of different transactive systems, (2) devise tools to address canonical problems that exemplify challenges and scenarios of transactive systems, and (3) provide guidelines for design of future transactive systems. This report, Part 1 of a two part series, advances the above-listed research objectives by reviewing existing transactive systems and identifying a theoretical foundation that integrates payoff functions, control decisions, information privacy, and mathematical solution concepts.

  8. Optimization of filtration for reduction of lung dose from Rn decay products: Part I--Theoretical

    International Nuclear Information System (INIS)

    Curling, C.A.; Rudnick, S.N.; Ryan, P.B.; Moeller, D.W.

    1990-01-01

    A theoretical model was developed for the optimization of filter characteristics that would minimize the dose from the inhalation of Rn decay products. Modified forms of the Jacobi-Porstendorfer room model and the Jacobi-Eisfeld lung dose model were chosen for use in the mathematical simulation. Optimized parameters of the filter were the thickness, solidity, and fiber diameter. For purposes of the calculations, the room dimensions, air exchange rate, particle-size distribution and concentration, and the Rn concentration were specified. The resulting computer-aided optimal design was a thin filter (the minimum thickness used in the computer model was 0.1 mm) having low solidity (the minimum solidity used was 0.5%) and large diameter fibers (the maximum diameter used was 100 microns). The simulation implies that a significant reduction in the dose rate can be achieved using a well-designed recirculating filter system. The theoretical model, using the assumption of ideal mixing, predicts an 80% reduction in the dose rate, although inherent in this assumption is the movement of 230 room volumes per hour through the fan

  9. Bio boiler - Control conditions. Part 1: Model development and analysis of operating conditions; Biokedel - Reguleringsmaessige forhold. Del 1: Modeludvikling og analyse af dynamiske driftsforhold

    Energy Technology Data Exchange (ETDEWEB)

    Boecher Poulsen, K.; Christensen, Torkild; Mortensen, Jan; Runge Kristoffersen, J.; Kristmundsson, E. [Tech-wise A/S (Denmark); Moekbak, T.; Mortensen, Hans Peter [Elsam A/S (Denmark)

    2002-12-15

    This report focuses on the model-building part of the PSO project, 'Control Conditions Bio-boiler'. In the project, which treats dynamic simulation of biomass fired power plants via the MMS software, a certain number of straw/wood chip modules have been built, together with a combustion module which, when connected to the existing MMS modules, can be used for dynamic simulation. Furthermore, a certain number of continuous and discrete components have been built which, together with the remaining MMS modules will create a complete model of the active part of the control structure under the most common operation conditions. By means of the developed straw, combustion and control modules, a model of Enstedvaerket's bio-boiler is built (without wood chip super-heater), including practically all auxiliary control mechanisms. In the report the primary problems caused by the development of the model are discussed, typically numerical problems. First of all it is discussed how a steady state condition can be reached from a nonphysical condition at the start-up of the simulation. After reaching a steady state condition at full load, the boiler load is reduced by adjusting the desired live steam flow setpoint value and the load gradient (as it would be done from the control room). While reducing to part load, one straw line is closed down, as it would be done in 'real life'. From part load, the boiler load is once again in the same way increased to full. (BA) The simulation results are then compared to measurements made on the same boiler during load reduction and load increase.

  10. Part 1: diagnosis and monitoring

    Directory of Open Access Journals (Sweden)

    Dorota Krasowska

    2017-11-01

    Full Text Available Systemic sclerosis is an immune-mediated disease characterized by a chronic and progressive course. It often leads to multiorgan failure and patient disability, and contributes to significant reduction in the quality of life. Systemic sclerosis affects the skin, subcutaneous tissue, muscles, osteoarticular system and internal organs. The complexity and diversity of clinical presentations require an individual approach and multidisciplinary collaboration both at the stage of diagnosis and treatment. Critical factors in systemic sclerosis include early diagnosis, assessment of internal organ involvement, identification of patients at potential risk of organ complications, assessment of disease dynamics and activity, and implementation of optimal therapy. Part 1 presents current recommendations for the diagnostics and monitoring of patients with systemic sclerosis. Attention is given to classification criteria, clinical forms of systemic sclerosis, assessment of skin thickness and systemic sclerosis microangiopathy, significance of antinuclear antibodies, diagnosis of interstitial lung disease and pulmonary arterial hypertension, renal crisis and cardiac abnormalities, and evaluation of the gastrointestinal tract and osteoarticular and muscular systems.

  11. Development of a Dynamic Biomechanical Model for Load Carriage: Phase 1 Part A: Equipment Upgrades to Accommodate Dynamic Biomechanical Modeling

    National Research Council Canada - National Science Library

    Stevenson, Joan M; Reid, Susan A; Bryant, J. T; Hadcock, Lindsay J; Morin, Evelyn L

    2005-01-01

    .... This report describes the purposes and outputs available from the pack person motion, describes the development, construction, calibration and protocol for use of smaller strap sensors and the moment...

  12. Rotary Bed Reactor for Chemical-Looping Combustion with Carbon Capture. Part 1: Reactor Design and Model Development

    KAUST Repository

    Zhao, Zhenlong; Chen, Tianjiao; Ghoniem, Ahmed F.

    2013-01-01

    Chemical-looping combustion (CLC) is a novel and promising technology for power generation with inherent CO2 capture. Currently, almost all of the research has been focused on developing CLC-based interconnected fluidized-bed reactors. In this two

  13. The book, the stories, the people: an ongoing dialogic narrative inquiry study combining a practice development project. Part 1: the research context.

    Science.gov (United States)

    Grant, A; Biley, F C; Leigh-Phippard, H; Walker, H

    2012-11-01

    This paper, part one of a two paper report, describes key aspects of the research context of an ongoing practice development project, conducted on two UK sites. The paper begins with a discussion of the project's origins within a community of people working in the recovery paradigm, including the contributory strand of the first author's recovery and survivor writing. The discussion then turns to three inter-related areas within which the research component sits and which provide it with philosophical, theoretical and conceptual coherence. Each area will be unpacked and its significance explained. This will provide a platform for discussing the focus, methodology and methods of the research, and related assumptions governing both data collection and analysis. The paper concludes with a research commitment to a mental health nursing practice allied to recovery as narrative healing. Links are made to the second paper which describes the context and specifics of a Writing for Recovery project for users, survivors and carers. This shares with, and builds on, the overall project's research context and its assumptions. © 2012 Blackwell Publishing.

  14. Research and Development of Methods for Estimating Physicochemical Properties of Organic Compounds of Environmental Concern. Part 1.

    Science.gov (United States)

    1981-06-01

    involved. Many of the chemicals are insecticides, herbicides, fungicides , or compounds of re- lated structure. Aromatic and polynuclear aromatic hydrocarbons...Water Partition Coefficients," Proc. 7th British Insecticide and Fungicide Conf., Vol. 1, The Boots Company Ltd., Nottingham, G.B. (1973). 6. Browman...Peniciii um, Pseudomonae, Thiobacillus, Torulop’is, Trichoderma , Micro onospora, Streptomyces Marine Aquatic Achremobacter, Flavobacteriwn, [53] System

  15. The development of the design method of nuclear piping system supported by elasto-plastic support structures (Part 1)

    International Nuclear Information System (INIS)

    Endo, R.; Murota, M.; Kawahata, J.-I.; Sato, T.; Mekomoto, Y.; Takayama, Y.; Kobayashi, H.; Hirose, J.

    1993-01-01

    The conventional aseismic design method of nuclear piping system is very conservative because of the accumulation of various safety factors in the design process, and nuclear piping systems are thought to have a large safety margin. Considering this situation, we promoted research to further rationalize nuclear power plants by reducing the amount of support structures and reducing the piping seismic response through vibration energy absorption resulting from the elasto-plastic behavior of piping support structures. The research has the following three stages. In the first stage, we select conventional piping support structures in Japanese light-water reactors that exhibit elasto-plastic behavior, and study the displacement dependency and the vibration frequency dependency on the stiffness and the energy absorption by testing their model. In the second stage, we make a piping test model with support structures whose characteristics have already been obtained, and perform vibration tests on a shaking table. In this way, we analyze the piping vibration characteristics by sinusoidal wave sweep tests and the piping response characteristics by seismic wave vibration tests, when the support structures are in an elasto-plastic condition. In the third stage, a general method is developed to evaluate the characteristics of the support structures obtained in the tests and it is applied to the evaluation of the characteristics of general support structures. A simplified analysis method is developed to evaluate the piping seismic response using the piping model test result. To expand the results mentioned above, we are developing a seismic design method of piping systems that allows support structures to have elasto-plastic behaviour. This paper reports the results of experiments conducted under the joint research program of Japanese electric power companies with support elements in the first stage and those with piping models in the second stage

  16. Empirical Model Development for Predicting Shock Response on Composite Materials Subjected to Pyroshock Loading. Volume 2, Part 1; Appendices

    Science.gov (United States)

    Gentz, Steven J.; Ordway, David O.; Parsons, David S.; Garrison, Craig M.; Rodgers, C. Steven; Collins, Brian W.

    2015-01-01

    The NASA Engineering and Safety Center (NESC) received a request to develop an analysis model based on both frequency response and wave propagation analyses for predicting shock response spectrum (SRS) on composite materials subjected to pyroshock loading. The model would account for near-field environment (approximately 9 inches from the source) dominated by direct wave propagation, mid-field environment (approximately 2 feet from the source) characterized by wave propagation and structural resonances, and far-field environment dominated by lower frequency bending waves in the structure. This document contains appendices to the Volume I report.

  17. Smart Body or the Problem of Human Corporeality Development in the Context of Outsourced Life. Part 1.

    Directory of Open Access Journals (Sweden)

    Smirnov S.A.,

    2016-04-01

    Full Text Available The paper analyses the issue of a popular trend called ‘life outsourcing’ which affects the structure of personality in an individual. Basing on the works of L.S. Vygotsky and others, the author explores the methodology of the concept of cultural development as a process of formation of an embodied personality or non-organic body. He outlines the search for the approaches to the process of cultural development and for its descriptions in terms of personality construction and ‘soul organism’ which can be traced down in Vygotsky’s works. According to these works, cultural-historical psychology employed a concept of tool- and activity-based personality body, or soul organism. As it is argued in the paper, this concept is to a certain extent incomplete. What happens to the individual’s personality body in a situation of increasingly popular life outsourcing, i.e. when more and more basic functions and actions are transferred from the individual to various devices? Using artistic creativity as an example, the author explores the artist’s transition from working with natural materials to working with devices and focuses on the problem of the artist’s ‘smart body’ losing the feeling of texture and form. The issue is to be continued in the second paper.

  18. Development of Wall-Thinning Evaluation Procedure for Nuclear Power Plant Piping—Part 1: Quantification of Thickness Measurement Deviation

    Directory of Open Access Journals (Sweden)

    Hun Yun

    2016-06-01

    Full Text Available Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs. Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

  19. Development of flight experiment work performance and workstation interface requirements, part 1. Technical report and appendices A through G

    Science.gov (United States)

    Hatterick, R. G.

    1973-01-01

    A skill requirement definition method was applied to the problem of determining, at an early stage in system/mission definition, the skills required of on-orbit crew personnel whose activities will be related to the conduct or support of earth-orbital research. The experiment data base was selected from proposed experiments in NASA's earth orbital research and application investigation program as related to space shuttle missions, specifically those being considered for Sortie Lab. Concepts for two integrated workstation consoles for Sortie Lab experiment operations were developed, one each for earth observations and materials sciences payloads, utilizing a common supporting subsystems core console. A comprehensive data base of crew functions, operating environments, task dependencies, task-skills and occupational skills applicable to a representative cross section of earth orbital research experiments is presented. All data has been coded alphanumerically to permit efficient, low cost exercise and application of the data through automatic data processing in the future.

  20. [Risk factors for the development of venous insufficiency of the lower limbs during pregnancy--part 1].

    Science.gov (United States)

    Ropacka-Lesiak, Mariola; Kasperczak, Jarosław; Breborowicz, Grzegorz H

    2012-12-01

    The venous system alters its function in pregnancy--the changes are both functional and structural. It becomes particularly vulnerable to the development of venous thrombosis and related complications. These adverse factors acting on the veins in pregnancy include: an increase in circulating blood volume, expansion of the uterus, weight gain, reduced physical activity hormonal changes. The changes in the plasma have a significant impact on the venous system. In pregnancy an increased level of fibrinogen and coagulation factors VII, VIII, IX and X, and von Willenbrand factor can be observed. Smooth muscle relaxation and relaxation of collagen fibers are caused by progesterone and estrogen, and it may result in the development of varicose veins, venous thrombosis and venous insufficiency The relationships between the hormones and the muscle pump efficiency has not been proven as yet. Estrogens cause an increase in the synthesis of coagulation proteins and it may result in the high risk of venous thrombosis and its consequences. Progesterone inhibits smooth muscle contraction, while estrogens cause relaxation and loosening of the bonds between the collagen fibers. The increase in the level of progesterone is of particular importance. It has a relaxing effect on the muscle, resulting in disorders of the vein shrinkage, affecting the increase of their capacity and valvular insufficiency, and valvular edges are not in contact with each other due to the vasodilatation. Estrogens have a similar effect, and additionally it may also cause an impairment in the collagen fibers connection and synthesis. This can result in the formation of telanglectasia without venous hypertension. Estrogens may also affect the synthesis of prostaglandins and nitric oxide. Estradiol inhibits vascular smooth muscle cell proliferation and stimulates cell migration and secretion of matrix proteins, as well as regeneration of the damaged vessels. Estrogen inhibits the production of cytokines

  1. Chemometrics in spectroscopy. Part 1. Classical chemometrics

    International Nuclear Information System (INIS)

    Geladi, Paul

    2003-01-01

    An overview is given of chemometrics as it can be applied to spectroscopic and other multivariate data. Major chemometrics and data analysis techniques are described. An important aspect is the focus on soft modeling for situations that are too complicated for the traditional hard models to work. Also measurement noise is given due attention. A small example is used to illustrate some ways of working, mainly by using graphics. Selected literature references are given. Part 1 deals with classical chemometrics. Part 2 presents some newer developments and includes some more elaborated examples

  2. High-voltage leak detection of a parenteral proteinaceous solution product packaged in form-fill-seal plastic laminate bags. Part 1. Method development and validation.

    Science.gov (United States)

    Damgaard, Rasmus; Rasmussen, Mats; Buus, Peter; Mulhall, Brian; Guazzo, Dana Morton

    2013-01-01

    In Part 1 of this three-part research series, a leak test performed using high-voltage leak detection (HVLD) technology, also referred to as an electrical conductivity and capacitance leak test, was developed and validated for container-closure integrity verification of a small-volume laminate plastic bag containing an aqueous solution for injection. The sterile parenteral product is the rapid-acting insulin analogue, insulin aspart (NovoRapid®/NovoLog®, by Novo Nordisk A/S, Bagsværd, Denmark). The aseptically filled and sealed package is designed to preserve product sterility through expiry. Method development and validation work incorporated positive control packages with a single hole laser-drilled through the laminate film of each bag. A unique HVLD method characterized by specific high-voltage and potentiometer set points was established for testing bags positioned in each of three possible orientations as they are conveyed through the instrument's test zone in each of two possible directions-resulting in a total of six different test method options. Validation study results successfully demonstrated the ability of all six methods to accurately and reliably detect those packages with laser-drilled holes from 2.5-11.2 μm in nominal diameter. Part 2 of this series will further explore HVLD test results as a function of package seal and product storage variables. The final Part 3 will report the impact of HVLD exposure on product physico-chemical stability. In this Part 1 of a three-part research series, a leak test method based on electrical conductivity and capacitance, called high voltage leak detection (HVLD), was used to find leaks in small plastic bags filled with an insulin pharmaceutical solution for human injection by Novo Nordisk A/S (Bagsværd, Denmark). To perform the test, the package is electrically grounded while being conveyed past an electrode linked to a high-voltage, low-amperage transformer. The instrument measures the current that passes

  3. Modeling the defrost process in complex geometries – Part 1: Development of a one-dimensional defrost model

    Directory of Open Access Journals (Sweden)

    van Buren Simon

    2017-01-01

    Full Text Available Frost formation is a common, often undesired phenomenon in heat exchanges such as air coolers. Thus, air coolers have to be defrosted periodically, causing significant energy consumption. For the design and optimization, prediction of defrosting by a CFD tool is desired. This paper presents a one-dimensional transient model approach suitable to be used as a zero-dimensional wall-function in CFD for modeling the defrost process at the fin and tube interfaces. In accordance to previous work a multi stage defrost model is introduced (e.g. [1, 2]. In the first instance the multi stage model is implemented and validated using MATLAB. The defrost process of a one-dimensional frost segment is investigated. Fixed boundary conditions are provided at the frost interfaces. The simulation results verify the plausibility of the designed model. The evaluation of the simulated defrost process shows the expected convergent behavior of the three-stage sequence.

  4. Biotrickling filter modeling for styrene abatement. Part 1: Model development, calibration and validation on an industrial scale.

    Science.gov (United States)

    San-Valero, Pau; Dorado, Antonio D; Martínez-Soria, Vicente; Gabaldón, Carmen

    2018-01-01

    A three-phase dynamic mathematical model based on mass balances describing the main processes in biotrickling filtration: convection, mass transfer, diffusion, and biodegradation was calibrated and validated for the simulation of an industrial styrene-degrading biotrickling filter. The model considered the key features of the industrial operation of biotrickling filters: variable conditions of loading and intermittent irrigation. These features were included in the model switching from the mathematical description of periods with and without irrigation. Model equations were based on the mass balances describing the main processes in biotrickling filtration: convection, mass transfer, diffusion, and biodegradation. The model was calibrated with steady-state data from a laboratory biotrickling filter treating inlet loads at 13-74 g C m -3 h -1 and at empty bed residence time of 30-15 s. The model predicted the dynamic emission in the outlet of the biotrickling filter, simulating the small peaks of concentration occurring during irrigation. The validation of the model was performed using data from a pilot on-site biotrickling filter treating styrene installed in a fiber-reinforced facility. The model predicted the performance of the biotrickling filter working under high-oscillating emissions at an inlet load in a range of 5-23 g C m -3 h -1 and at an empty bed residence time of 31 s for more than 50 days, with a goodness of fit of 0.84. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Control of Chaos: New Perspectives in Experimental and Theoretical Science. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering. Theme Issue. Part 1. Volume 8, Number 8, August 1998.

    Science.gov (United States)

    1998-08-01

    de Matemdticas, Universidad de Murcia, Murcia, Spain RICARDO CHACON Departamento de Electr6nica e, Ingenieria Electromecdnica, Escuela, de... Ingenierias Industriales, Universidad de Extremadura, 06071, Badajoz, Spain MIGUEL ANGEL LOPEZ Departamento de Matemdticas, Aplicada, Escuela Universitaria de...World Scientific Publishing Company FUZZY CONTROL OF CHAOS OSCAR CALVO* CICpBA, L.E.L C.1, Departamento de Electrotecnia, Facultad de Ingenieria

  6. Proceedings of NUCLEAR 2015 the 8th annual international conference on sustainable development through nuclear research and education. Part 1/3

    International Nuclear Information System (INIS)

    Constantin, Marin; Turcu, Ilie

    2015-01-01

    The proceedings of the NUCLEAR 2015 the 8"t"h annual international conference on sustainable development through nuclear research and education. Part 1/3 held at INR-Pitesti on May, 27-29 contain 62 communications presented in two plenary sessions and three sections addressing the themes of Nuclear energy, Environmental protection and Sustainable development. In turn these sections are addressing the following items: Section 1.1 Nuclear safety and severe accidents (7 papers); Section 1.2 Nuclear reactors and gen. IV (5 papers); Section 1.3 Nuclear technology and materials (19 papers); Section 2.1 Radioprotection & air, water and soil protection (1 paper); Section 2.2 Radioactive waste management (9 papers); Section 3.1 policies and strategies in nuclear research (1 paper); Section 3.2 Education, training and knowledge management (16 papers); Section 3.3 International partnership for a sustainable development (4 papers). These papers are presented as abstracts in 'Nuclear 2015 - Book of Abstracts', separately processed

  7. Theoretical Ideas of Local Government and State Government Development

    Directory of Open Access Journals (Sweden)

    Nikolay I. Churinov

    2016-03-01

    Full Text Available In this article the characteristic of a theoretical component of model of interaction of local government bodies with the central government, and also development of scientific base in the course of history is given. Relevance to this subject in the conditions of the Russian reality is added by federalism of a state system of Russia, namely a thin side in questions of competences between bodies of one hierarchy. This article, will be useful to those who deal with issues in the field of the theory of the state and the right and the municipal right. Historic facts in the form of the regulatory legal acts adopted earlier which subsequently, were a source for development of theoretical ideas of local self-government and the government are given in article.

  8. Development of procedures for calculating stiffness and damping properties of elastomers in engineering applications. Part 1: Verification of basic methods

    Science.gov (United States)

    Chiang, T.; Tessarzik, J. M.; Badgley, R. H.

    1972-01-01

    The primary aim of this investigation was verification of basic methods which are to be used in cataloging elastomer dynamic properties (stiffness and damping) in terms of viscoelastic model constants. These constants may then be used to predict dynamic properties for general elastomer shapes and operating conditions, thereby permitting optimum application of elastomers as energy absorption and/or energy storage devices in the control of vibrations in a broad variety of applications. The efforts reported involved: (1) literature search; (2) the design, fabrication and use of a test rig for obtaining elastomer dynamic test data over a wide range of frequencies, amplitudes, and preloads; and (3) the reduction of the test data, by means of a selected three-element elastomer model and specialized curve fitting techniques, to material properties. Material constants thus obtained have been used to calculate stiffness and damping for comparison with measured test data. These comparisons are excellent for a number of test conditions and only fair to poor for others. The results confirm the validity of the basic approach of the overall program and the mechanics of the cataloging procedure, and at the same time suggest areas in which refinements should be made.

  9. Fast sorption measurements of volatile organic compounds on building materials: Part 1 – Methodology developed for field applications

    Directory of Open Access Journals (Sweden)

    M. Rizk

    2016-03-01

    Full Text Available A Proton Transfer Reaction-Mass Spectrometer (PTR-MS has been coupled to the outlet of a Field and Laboratory Emission Cell (FLEC, to measure volatile organic compounds (VOC concentration during a sorption experiments (Rizk et al., this issue [1]. The limits of detection of the PTR-MS for three VOCs are presented for different time resolution (2, 10 and 20 s. The mass transfer coefficient was calculated in the FLEC cavity for the different flow rates. The concentration profile obtained from a sorption experiment performed on a gypsum board and a vinyl flooring are also presented in comparison with the profile obtained for a Pyrex glass used as a material that do not present any sorption behavior (no sink. Finally, the correlation between the concentration of VOCs adsorbed on the surface of the gypsum board at equilibrium (Cse and the concentration of VOCs Ce measured in the gas phase at equilibrium is presented for benzene, C8 aromatics and toluene.

  10. Axiological aspects of sustainable development with theoretical and empirical approach

    Directory of Open Access Journals (Sweden)

    Włodzimierz Kaczocha

    2011-01-01

    Full Text Available The first part of the paper presents the values – goals, which are contained in political programs of sustainable development. These values (e.g. social justice, intergenerational justice, liberty, sustainable consumption and value of nature should be explained with respect to the assumptions of ethics of beliefs, obligation or responsibility. The second part discusses the results of empirical studies which focused on certain goals-values of sustainable development achieved by residents of rural areas. The third part contains analytical interpretation of three values: positive liberty, social justice and community, which are of key importance to sustainable development. The final fourth part discusses political and ethical dilemmas which must be faced by Polish politicians: should we design and implement sustainable development evenly or, in consideration of the ethical aspect; should we start first from radical improvement in conditions of living among poor people?

  11. A framework for biodynamic feedthrough analysis--part I: theoretical foundations.

    Science.gov (United States)

    Venrooij, Joost; van Paassen, Marinus M; Mulder, Mark; Abbink, David A; Mulder, Max; van der Helm, Frans C T; Bulthoff, Heinrich H

    2014-09-01

    Biodynamic feedthrough (BDFT) is a complex phenomenon, which has been studied for several decades. However, there is little consensus on how to approach the BDFT problem in terms of definitions, nomenclature, and mathematical descriptions. In this paper, a framework for biodynamic feedthrough analysis is presented. The goal of this framework is two-fold. First, it provides some common ground between the seemingly large range of different approaches existing in the BDFT literature. Second, the framework itself allows for gaining new insights into BDFT phenomena. It will be shown how relevant signals can be obtained from measurement, how different BDFT dynamics can be derived from them, and how these different dynamics are related. Using the framework, BDFT can be dissected into several dynamical relationships, each relevant in understanding BDFT phenomena in more detail. The presentation of the BDFT framework is divided into two parts. This paper, Part I, addresses the theoretical foundations of the framework. Part II, which is also published in this issue, addresses the validation of the framework. The work is presented in two separate papers to allow for a detailed discussion of both the framework's theoretical background and its validation.

  12. Neutrino physics-the link between the microcosmos and the macrocosmos, a study in two parts: (1) Theoretical-a look at the tau neutrino mass and other quantum electrodynamical effects in third family lepton interactions and (2) Experimental-underwater astronomy in Hawai'i, the short prototype string of the Deep Underwater Muon and Neutrino Detector project

    International Nuclear Information System (INIS)

    Babson, J.F.

    1989-01-01

    The nineteen eighties has been a time in which Cosmology and Particle Physics have come together. This dissertation reflects that trend. It does so in two ways. First, in Chapters 1 through 3, there is a theoretical investigation into some aspects of generational universality. The consequences of a third lepton, namely the tauon, and an associated tau neutrino, are explored in terms of phenomenology (mass and V-A consistency) that may shed insight into questions of neutrino mass and increased symmetry at higher energies. Second, in Chapters 4 through 11, there is an experimental investigation in the form of constructing and operating the first stage of the DUMAND (Deep Underwater Muon and Neutrino Detection) project which was a ship suspended muon and neutrino telescope called the SPS (Short Prototype String). This detector is of the water Cherenkov type and is the first time such an instrument has been successfully built and tested for use in the ocean. Chapters 6 through 10 are devoted to the detailed documentation of the parts of the SPS and its technology integration that I designed, prototyped, and debugged. In particular, a complete description is given to the command and control communications system of the string, the digital control electronics and associated software for the Optical, Calibration, and Power modules as well as the fast digitizing electronics or String Bottom Controller (SBC). This includes the development of a microcontroller language UHPS (Underwater Hawai'i Programming System). Finally, Chapter 11 is an analysis of SPS data in terms of ascertaining a purely statistically based downward traveling muon rate at a depth of 4.0 Km yielding (2.06 ± 0.68) x 10 -2 Hz

  13. Teoretski pogled na razvojne strukture slovenskega podeželja = Theoretical view on the development structures of Slovenian rural space

    Directory of Open Access Journals (Sweden)

    Marijan M. Klemenčič

    2006-01-01

    Full Text Available Theoretical concepts and research problems of contemporary rural space are presented in the first part of the article, following with the attempt of defining the crucial factors of development and basic structures of Slovenian rural space after the 2nd World War as a starting-point for defining theoretically more advanced concepts in Slovenian geography.

  14. Economic Growth of a Rapidly Developing Economy: Theoretical Formulation

    Directory of Open Access Journals (Sweden)

    Oleg Sergeyevich Sukharev

    2016-06-01

    Full Text Available The subject matter of the article is the description of economic growth. Modern economy is characterized by a high rate of changes. These changes are the limiting parameters of modern development, which requires a modification of the basic models of growth, the substantiation of the expediency and necessity of a rapid development strategy. In a simple mathematical form, the statement of the problem of economic growth in the “green economy” is examined, in which the costs of environmental measures are not considered a priori as hampering economic development (as it is common for a number of modern neoclassical and neo-Keynesian growth models. The methodological basis of the article are the econometric approach and modelling method. The article has a theoretical character. The main hypothesis supposes that the rapid development strategy cannot make an adequate development strategy under certain conditions, but may be acceptable in other its specific conditions. In this sense, the important growth conditions are the availability of resources, the effectiveness of institutions and the current economic structure, the technological effectiveness of economy, as well as the conditions of technological development (“green economy” and the path of such development. In the article, on the theoretical level of analysis, the substantiation of the adequacy of the rapid development strategy for an economic system is given, whose goal is to achieve the standard of living of the countryleader. Based on the assumptions introduced, the period for which the rapid development strategy might be implemented and the economic lag of the country might be reduced from the country-leader is determined. The conditions that ensure the impact of innovations on the rate of economic development are summarized. The introduced range of dependencies and relations can be useful for the elaboration of the theory of innovation development and for the formation of a new

  15. Development and implementation of a clinical needs assessment to support nursing and midwifery students with a disability in clinical practice: part 1.

    Science.gov (United States)

    Howlin, Frances; Halligan, Phil; O'Toole, Sinead

    2014-09-01

    Equality and disability legislation, coupled with increasing numbers of students with a disability, and inadequate supports in clinical practice, acted as catalysts to explore how best to support undergraduate nursing and midwifery students on clinical placements. Historically, higher education institutions provide reasonable accommodations for theoretical rather than clinical modules for practice placements. This paper describes the development and implementation of a Clinical Needs Assessment designed to identify the necessary supports or reasonable accommodations for nursing and midwifery students with a disability undertaking work placements in clinical practice. The existing literature, and consultation with an expert panel, revealed that needs assessments should be competency based and clearly identify the core skills or elements of practice that the student must attain to achieve proficiency and competence. The five Domains of Competence, advocated by An Bord Altranais, the Nursing and Midwifery Board of Ireland, formed the framework for the Clinical Needs Assessment. A panel of experts generated performance indicators to enable the identification of individualised reasonable accommodations for year 1 nursing and midwifery students in one Irish University. Development and implementation of the Clinical Needs Assessment promoted equality, inclusion and a level playing field for nursing and midwifery students with a disability in clinical practice. Copyright © 2014 Elsevier Ltd. All rights reserved.

  16. [A new stage of development of gerontology and geriatrics in Russia: problems of creation of a geriatric care system. Part 1. Relevance, regulatory infrastructure].

    Science.gov (United States)

    Anisimov, V N; Serpov, V Yu; Finagentov, A V; Khavinson, V Kh

    2017-01-01

    This article is a 1st part of the analytical review, focused on a new step in development of geriatrics in Russia. Creation of state system geriatric care as important part of state politics in the area of enhancement of quality of life was proved. General aspects of improvement of social support of disable elderly persons in condition of restricted budget and interagency separation was presented. Establishment of unified system of medical social support and gerotechnologies for the elderly was substantiated, as a mechanism facilitated life activity and decreasing of demographic loading on economic status of regions of Russian Federation. Legislative and normative regulations of gerontology and geriatric development were observed as well. Accepted legislative and normative acts were analyzed for period since 1977 to 2014. The necessity of approaches to regulation modernization for elderly was demonstrated. Analytical review on number of legislative state documents issued after meeting of Presidium of State Council of the Russian Federation being in August 2014 was also presented. Applicability of these documents for realization new strategy of gerontology and geriatrics development in Russia was proved.

  17. The Theoretical Aspects of the Security of Human Development

    OpenAIRE

    Markova Natalia S.; Demyanenko Alina A.

    2017-01-01

    The article is aimed at substantiating the basic categories of the conception of security of human development and formation of a definition of the concept of «security of human development» that would provide the most comprehensive understanding of the nature of this process. The main approaches to researching the phenomenon of «security» were analyzed. Characteristics of the formation of human security as part of a holistic paradigm of human development were considered together with rethink...

  18. Formation of modern theoretical regulations about organization concerning management development

    Directory of Open Access Journals (Sweden)

    Zhalinska I.V.

    2017-03-01

    Full Text Available The article deals with the scientific concepts about an organization as the entity of management concerning management development. The author studies the principal theoretical regulations about an organization within the most spread schools of management and context of development of other managerial concepts in particular, strategic management. It is found out that an organization and its development had not considered as the factor of an effective activity before. Researches paid their attention to single aspects of organization activity where the aspects allowed to increase economic efficiency. However, the objective complication of conditions of enterprises’ activities caused the necessity of scientific research of adequate models of functioning and development of organizations, which currently cannot be provided by traditional management concepts. Thus, theoretical and practical prerequisites arise for a separate scientific set of researches within the science of management such as the theory of an organization. The article describes the main classified approaches to the models of an organization. The paper researches the challenges in present management, and those ones, which have caused the crisis in modern management. It is singled out the following actual aspects of modern organizational processes as the all-round use of modern information and computer systems, the development of integration and in cooperation in management, the appearance of new management technologies, the use of new assessment criteria for organization activity, striving for organizational shifts and innovations. Due to the generalization of the study results, the authors single out such key aspects in the development of the science of management, as the crisis of traditional management influences upon practical activity of modern organizations; the achievements of traditional management schools are becoming necessary, but not determinant factors of organization

  19. An Emerging Theoretical Model of Music Therapy Student Development.

    Science.gov (United States)

    Dvorak, Abbey L; Hernandez-Ruiz, Eugenia; Jang, Sekyung; Kim, Borin; Joseph, Megan; Wells, Kori E

    2017-07-01

    Music therapy students negotiate a complex relationship with music and its use in clinical work throughout their education and training. This distinct, pervasive, and evolving relationship suggests a developmental process unique to music therapy. The purpose of this grounded theory study was to create a theoretical model of music therapy students' developmental process, beginning with a study within one large Midwestern university. Participants (N = 15) were music therapy students who completed one 60-minute intensive interview, followed by a 20-minute member check meeting. Recorded interviews were transcribed, analyzed, and coded using open and axial coding. The theoretical model that emerged was a six-step sequential developmental progression that included the following themes: (a) Personal Connection, (b) Turning Point, (c) Adjusting Relationship with Music, (d) Growth and Development, (e) Evolution, and (f) Empowerment. The first three steps are linear; development continues in a cyclical process among the last three steps. As the cycle continues, music therapy students continue to grow and develop their skills, leading to increased empowerment, and more specifically, increased self-efficacy and competence. Further exploration of the model is needed to inform educators' and other key stakeholders' understanding of student needs and concerns as they progress through music therapy degree programs. © the American Music Therapy Association 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

  20. Theoretical Insights for Developing the Concept of Social Technologies

    Directory of Open Access Journals (Sweden)

    Rūta Tamošiūnaitė

    2013-02-01

    Full Text Available Purpose—Social technologies continue to grow in popularity in society. Even though the term “social technology” is most commonly used to refer to new social media such as Twitter and Facebook, a redefinition of this concept based on the original definition is needed. Nowadays the concept of “social technology” has several aspects, which destabilize the dominant image of technology. It emphasizes the social sciences and the humanities as shapers of society, reconsiders the strength of “soft technologies.” The aim of this paper is to provide rich insight into the concept of social technologies’ and to develop the meaning of social technologies in information and knowledge society by analysing new needs and application forms of social technologies. Findings—the research contributed to the understanding of the concept of social technologies. Based on the analysis and synthesis of the scientific literature, a theoretical framework for defining social technologies was developed. Research limitations/implications—the research is limited in a few aspects. For a deeper understanding of social technologies and for developing technological perspectives in social sciences a broader theoretical, as well as empirical, research is necessary. In order to generalise the research findings, further research should include different dimensions from the perspective of other sciences. Article Type: conceptual paper.

  1. Theoretical Insights for Developing the Concept of Social Technologies

    Directory of Open Access Journals (Sweden)

    Monika Skaržauskaitė

    2012-12-01

    Full Text Available Purpose—Social technologies continue to grow in popularity in society. Even though the term “social technology” is most commonly used to refer to new social media such as Twitter and Facebook, a redefinition of this concept based on the original definition is needed. Nowadays the concept of “social technology” has several aspects, which destabilize the dominant image of technology. It emphasizes the social sciences and the humanities as shapers of society, reconsiders the strength of “soft technologies.” The aim of this paper is to provide rich insight into the concept of social technologies’ and to develop the meaning of social technologies in information and knowledge society by analysing new needs and application forms of social technologies.Findings—the research contributed to the understanding of the concept of social technologies. Based on the analysis and synthesis of the scientific literature, a theoretical framework for defining social technologies was developed.Research limitations/implications—the research is limited in a few aspects. For a deeper understanding of social technologies and for developing technological perspectives in social sciences a broader theoretical, as well as empirical, research is necessary. In order to generalise the research findings, further research should include different dimensions from the perspective of other sciences.

  2. Inorganic nanomedicine--part 1.

    Science.gov (United States)

    Sekhon, Bhupinder S; Kamboj, Seema R

    2010-08-01

    Inorganic nanomedicine refers to the use of inorganic or hybrid nanomaterials and nanosized objects to achieve innovative medical breakthroughs for drug and gene discovery and delivery, discovery of biomarkers, and molecular diagnostics. Potential uses for fluorescent quantum dots include cell labeling, biosensing, in vivo imaging, bimodal magnetic-luminescent imaging, and diagnostics. Biocompatible quantum dot conjugates have been used successfully for sentinel lymph node mapping, tumor targeting, tumor angiogenesis imaging, and metastatic cell tracking. Magnetic nanowires applications include biosensing and construction of nucleic acids sensors. Magnetic cell therapy is used for the repair of blood vessels. Magnetic nanoparticles (MNPs) are important for magnetic resonance imaging, drug delivery, cell labeling, and tracking. Superparamagnetic iron oxide nanoparticles are used for hyperthermic treatment of tumors. Multifunctional MNPs applications include drug and gene delivery, medical imaging, and targeted drug delivery. MNPs could have a vital role in developing techniques to simultaneously diagnose, monitor, and treat a wide range of common diseases and injuries. From the clinical editor: This review serves as an update about the current state of inorganic nanomedicine. The use of inorganic/hybrid nanomaterials and nanosized objects has already resulted in innovative medical breakthroughs for drug/gene discovery and delivery, discovery of biomarkers and molecular diagnostics, and is likely to remain one of the most prolific fields of nanomedicine. 2010 Elsevier Inc. All rights reserved.

  3. Development and validation of a theoretical test in basic laparoscopy

    DEFF Research Database (Denmark)

    Strandbygaard, Jeanett; Maagaard, Mathilde; Larsen, Christian Rifbjerg

    2013-01-01

    for first-year residents in obstetrics and gynecology. This study therefore aimed to develop and validate a framework for a theoretical knowledge test, a multiple-choice test, in basic theory related to laparoscopy. METHODS: The content of the multiple-choice test was determined by conducting informal...... conversational interviews with experts in laparoscopy. The subsequent relevance of the test questions was evaluated using the Delphi method involving regional chief physicians. Construct validity was tested by comparing test results from three groups with expected different clinical competence and knowledge.......001). Internal consistency (Cronbach's alpha) was 0.82. There was no evidence of differential item functioning between the three groups tested. CONCLUSIONS: A newly developed knowledge test in basic laparoscopy proved to have content and construct validity. The formula for the development and validation...

  4. Renal transplant scintigraphy (Part 1)

    International Nuclear Information System (INIS)

    Chew, Ghee

    2005-01-01

    Renal transplantation is the most effective mode of renal replacement therapy for correction of renal failure. Renal donors can either be: a. a deceased person - the kidneys being removed when brain death or absence of cerebral cortical function / perfusion is confirmed - the cadaveric kidney is packed in ice and nutrient solution and transplanted within 24 hours of removal ('cold ischemia') ob. a living donor - the donor may or may not be related to the recipient. Due to the limited length of the renal vessels and ureter of the donor kidney, it is implanted close to the bladder of the recipient. The donor vessels are anastomosed to the iliac artery and vein of the recipient. Transplant variants: a. 2 kidneys maybe transplanted because: - an old donor with less kidney reserve from atrophy due to age or disease (e.g. hypertension) - an infant donor when both kidneys are removed en bloc, b. Donor kidneys with more than 1 artery, vein or ureter. c. Donor horse shoe kidney d. Combined renal and pancreas transplant for type I diabetics -a short segment of duodenum transplanted with the pancreas maybe implanted into the bladder. Copyright (2005) The Australian and New Zealand Society of Nuclear Medicine

  5. Herbig-Haro objects: recent observational and theoretical developments

    International Nuclear Information System (INIS)

    Canto, J.

    1981-01-01

    A brief summary of our present observational and theoretical knowledge of Herbig-Haro objects is given. Special emphasis is given to the recent observational results in the radio frequency range and on the most recent models advanced to explain these objects. It is concluded that HH-objects are most probably intrinsic emission nebulae produced by the cooling of shock-heated material. The source of energy is likely to be a strong wind from a new born star which is displaced approximately 0.1 pc typically from the optical object. (Auth.)

  6. Projected 21st century coastal flooding in the Southern California Bight. Part 1: Development of the third generation CoSMoS model

    Science.gov (United States)

    O'Neill, Andrea; Erikson, Li; Barnard, Patrick; Limber, Patrick; Vitousek, Sean; Warrick, Jonathan; Foxgrover, Amy C.; Lovering, Jessica

    2018-01-01

    Due to the effects of climate change over the course of the next century, the combination of rising sea levels, severe storms, and coastal change will threaten the sustainability of coastal communities, development, and ecosystems as we know them today. To clearly identify coastal vulnerabilities and develop appropriate adaptation strategies due to projected increased levels of coastal flooding and erosion, coastal managers need local-scale hazards projections using the best available climate and coastal science. In collaboration with leading scientists world-wide, the USGS designed the Coastal Storm Modeling System (CoSMoS) to assess the coastal impacts of climate change for the California coast, including the combination of sea-level rise, storms, and coastal change. In this project, we directly address the needs of coastal resource managers in Southern California by integrating a vast range of global climate change projections in a thorough and comprehensive numerical modeling framework. In Part 1 of a two-part submission on CoSMoS, methods and the latest improvements are discussed, and an example of hazard projections is presented.

  7. Development of casting investment preventing blackening of noble metal alloys part 1. Application of developed investment for Ag-Pd-Cu-Au alloy.

    Science.gov (United States)

    Kakuta, Kiyoshi; Nakai, Akira; Goto, Shin-ichi; Wakamatsu, Yasushi; Yara, Atushi; Miyagawa, Yukio; Ogura, Hideo

    2003-03-01

    The objective of this study is to develop a casting investment that prevents the blackening of the cast surface of noble metal alloys. The experimental investments were prepared using a gypsum-bonded investment in which the metallic powders such as boron (B), silicon (Si), aluminum (Al) and titanium (Ti) were added as oxidizing agents. An Ag-Pd-Cu-Au alloy was cast into the mold made of the prepared investment. The effect of the addition of each metal powder was evaluated from the color difference between the as-cast surface and the polished surface of the cast specimen. The color of the as-cast surface approached that of the polished surface with increasing B and Al content. A lower mean value in the color difference was obtained at 0.25-1.00 mass% B content. B and Al are useful as an additive in a gypsum-bonded investment to prevent the blackening of an Ag-Pd-Cu-Au alloy. The effects of Si and Ti powder addition could not be found.

  8. EDUCATION FOR SUSTAINABLE DEVELOPMENT AND SCHOOL GEOGRAPHY. THEORETICAL CONSIDERATIONS

    Directory of Open Access Journals (Sweden)

    PÉTER BAGOLY-SIMÓ

    2013-01-01

    Full Text Available Over the last three decades, the concept of sustainable development has enjoyed growing attention. Transporting sustainable development into all forms of education is connected to Education for Sustainable Development (ESD. Due to its role in society, formal education plays a special part in the process of ESD implementation. This paper takes a closer look at the interconnectedness between sustainable development, ESD, and formal education by focusing on school geography, a subject with special affinity to both concepts and topics of ESD.

  9. Theoretical framework and methodological development of common subjective health outcome measures in osteoarthritis: a critical review

    Directory of Open Access Journals (Sweden)

    Johnston Marie

    2007-03-01

    Full Text Available Abstract Subjective measures involving clinician ratings or patient self-assessments have become recognised as an important tool for the assessment of health outcome. The value of a health outcome measure is usually assessed by a psychometric evaluation of its reliability, validity and responsiveness. However, psychometric testing involves an accumulation of evidence and has recognised limitations. It has been suggested that an evaluation of how well a measure has been developed would be a useful additional criteria in assessing the value of a measure. This paper explored the theoretical background and methodological development of subjective health status measures commonly used in osteoarthritis research. Fourteen subjective health outcome measures commonly used in osteoarthritis research were examined. Each measure was explored on the basis of their i theoretical framework (was there a definition of what was being assessed and was it part of a theoretical model? and ii methodological development (what was the scaling strategy, how were the items generated and reduced, what was the response format and what was the scoring method?. Only the AIMS, SF-36 and WHOQOL defined what they were assessing (i.e. the construct of interest and no measure assessed was part of a theoretical model. None of the clinician report measures appeared to have implemented a scaling procedure or described the rationale for the items selected or scoring system. Of the patient self-report measures, the AIMS, MPQ, OXFORD, SF-36, WHOQOL and WOMAC appeared to follow a standard psychometric scaling method. The DRP and EuroQol used alternative scaling methods. The review highlighted the general lack of theoretical framework for both clinician report and patient self-report measures. This review also drew attention to the wide variation in the methodological development of commonly used measures in OA. While, in general the patient self-report measures had good methodological

  10. An integrated approach to sensor FDI and signal reconstruction in HTGRs – Part I: Theoretical framework

    International Nuclear Information System (INIS)

    Uren, Kenneth R.; Schoor, George van; Rand, Carel P. du; Botha, Anrika

    2016-01-01

    Highlights: • An integrated sensor fault detection and isolation method for nuclear power plants. • Utilise techniques such as non-temporal parity space and principal component analysis. • Utilise statistical methods and fuzzy systems for sensor fault isolation. • Allow the detection of multiple sensor faults. • Proposed methodology suitable for online implementation. - Abstract: Sensor fault detection and isolation (FDI) is an important element in modern nuclear power plant (NPP) diagnostic systems. In this respect, sensor FDI of generation II and III water-cooled nuclear energy systems has become an active research topic to continually improve levels of reliability, safety, and operation. However, evolutionary advances in reactor and component technology together with different energy conversion methodologies support the investigation of alternative approaches to sensor FDI. Within this context, the basic aim of this two part series is to propose, implement and evaluate an integrated approach for sensor FDI and signal reconstruction in generation IV nuclear high temperature gas-cooled reactors (HTGRs). In part I of this two part series, the methodology and theoretical background of the integrated sensor FDI and signal reconstruction approach are given. This approach combines techniques such as non-temporal parity space analysis (PSA), principal component analysis (PCA), sensor fusion and fuzzy decision systems to form a more powerful sensor FDI methodology that exploits the strengths of the individual techniques. An illustrative example of the PCA algorithm is given making use of actual data retrieved from a pilot plant called the pebble bed micro model (PBMM). This is a prototype gas turbine power plant based on the first design configuration of the pebble bed modular reactor (PBMR). In part II, the described integrated sensor fault detection approach will be evaluated by means of two case studies. In the first case study the approach will be evaluated

  11. The Function of Religiosity in Personal Development: Some Theoretical Remarks

    Directory of Open Access Journals (Sweden)

    Tatjana Folieva

    2014-12-01

    Full Text Available Dwelling on a number of theoretical considerations bearing on the problem of the function of religiosity in personal development, the author specifi es the disciplines related to the study of the problem and formulates working defi nitions of the concepts of development, religiosity and norm. The situation in Russian science today gives priority to psychology of development and religion studies, as the former possesses a serious methodological and methodical basis while the latter, disposing of a unique mass of empiric material, provides broader context for studying religiosity and secures the link between its psychological study and its historical, sociological, henomenological etc. analysis. This approach will also be productive for theology, since psychology can occupy a special place within the system of ecclesiastical sciences as an applied discipline; however, its confessional” character should then fi nd expression not in the search for a religious basis, but in the study of phenomena belonging to the religious milieu. It is also suggested that religiosity should be considered as a ynamic, non-linear process which can be observed here and now and whose direction and specifi c character in the future can be prognosticated, albeit with a certain amount of reservation. Religiosity and development are two interconnected processes in which the person chooses the elements needed in his personal life for the self-regulation of the cognitive, aff ective and behavioral components. For this reason it seems rather diffi cult to determine the function of religiosity in the development of a personality.

  12. A Faculty Development Session or Resident as Teacher Session for Didactic and Clinical Teaching Techniques; Part 1 of 2: Engaging Learners with Effective Didactic Teaching

    Directory of Open Access Journals (Sweden)

    Megan Boysen-Osborn

    2016-07-01

    Full Text Available Audience: This workshop is intended for faculty members in an emergency medicine (or other residency program, but is also appropriate for chief residents and medical student educators, including basic science faculty. Introduction: Faculty development sessions are required by the Accreditation Council for Graduate Medical Education and enhance the learning environment within residency programs. Resident as teacher sessions are important in helping residents transition from junior learners to supervisors of medical students and junior residents. Part I of this two-part workshop introduces learners to effective techniques to engaging learners during didactic sessions. Objectives: By the end of this workshop, the learner will: 1 describe eight teaching techniques that encourage active learning during didactic sessions; 2 plan a didactic session using at least one of eight new teaching techniques for didactic instruction. Methods: This educational session is uses several blended instructional methods, including team-based learning (classic and modified, the flipped classroom, audience response systems, pause procedures in order to demonstrate effective didactic teaching techniques.

  13. Some recent developments in the theoretical dynamics of magnetic fields

    International Nuclear Information System (INIS)

    Low, B.C.

    1986-01-01

    This article describes recent developments in the theoretical investigation of magnetostatic equilibrium in the presence of gravity, nonequilibrium in hydromagnetics, and classical problems in hydromagnetic stability. The construction of magnetostatic dequilibria has progressed beyond geometrically idealized systems, such as the axisymmetric system, to fully three-dimensional systems capable of modelling realistic solar structures. Nonequilibrium in a magnetic field with an arbitrary interweaving of lines of force due to random footpoint motion is a novel and subtle property with important implications for the solar atmosphere. To the extent quasi-static solar structures are approximated by stable equilibrium, ideal hydromagnetic stability theory provides a first insight into how stability is achieved in the solar environment. A qualitative physical picture based on recent stability analyses is given. The article places emphasis on understanding basic principles and issues rather than detailed results which can be found in the published literature

  14. Quantum Hall effects recent theoretical and experimental developments

    CERN Document Server

    Ezawa, Zyun Francis

    2013-01-01

    Enthusiasm for research on the quantum Hall effect (QHE) is unbounded. The QHE is one of the most fascinating and beautiful phenomena in all branches of physics. Tremendous theoretical and experimental developments are still being made in this sphere. Composite bosons, composite fermions and anyons were among distinguishing ideas in the original edition. In the 2nd edition, fantastic phenomena associated with the interlayer phase coherence in the bilayer system were extensively described. The microscopic theory of the QHE was formulated based on the noncommutative geometry. Furthermore, the unconventional QHE in graphene was reviewed, where the electron dynamics can be treated as relativistic Dirac fermions and even the supersymmetric quantum mechanics plays a key role. In this 3rd edition, all chapters are carefully reexamined and updated. A highlight is the new chapter on topological insulators. Indeed, the concept of topological insulator stems from the QHE. Other new topics are recent prominent experime...

  15. Wind energy development as a part of Poland's industrial development

    DEFF Research Database (Denmark)

    Stoerring, Dagmara; Hvelplund, Frede Kloster

    2003-01-01

    The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland....

  16. Research in theoretical radiobiology and radiological physics: Final technical report, May 1, 1986-December 31, 1987

    International Nuclear Information System (INIS)

    Rossi, H.H.

    1987-12-01

    The work carried out under this Grant included continuation of experimental research in radiation biophysics that was previously initiated, as well as extensive theoretical efforts primarily devoted to the further development of the Theory of Dual Radiation Action. Documents for international and national organizations were prepared or evaluated. Attendance at a number of international and national meetings and scientific correspondence were also in part supported by this grant. 14 refs

  17. The Theoretical Aspects of the Security of Human Development

    Directory of Open Access Journals (Sweden)

    Markova Natalia S.

    2017-10-01

    Full Text Available The article is aimed at substantiating the basic categories of the conception of security of human development and formation of a definition of the concept of «security of human development» that would provide the most comprehensive understanding of the nature of this process. The main approaches to researching the phenomenon of «security» were analyzed. Characteristics of the formation of human security as part of a holistic paradigm of human development were considered together with rethinking it as a new theory of global security. A cross-categorical analysis of the concepts of «human development» and of «human security» was carried out by the main criteria: characteristics, time frames, main purpose and objectives. As a result, the human security is complementary to the concept of human development in the part of safe variants of choice (freedom from needs; it further facilitated the security provision at the level of prosperity and progress, not at the level of survival. It has been determined that the conception of human security is at the same time an element of the conception of human development as well as of human security.

  18. Modeling Multibody Systems with Uncertainties. Part I: Theoretical and Computational Aspects

    International Nuclear Information System (INIS)

    Sandu, Adrian; Sandu, Corina; Ahmadian, Mehdi

    2006-01-01

    This study explores the use of generalized polynomial chaos theory for modeling complex nonlinear multibody dynamic systems in the presence of parametric and external uncertainty. The polynomial chaos framework has been chosen because it offers an efficient computational approach for the large, nonlinear multibody models of engineering systems of interest, where the number of uncertain parameters is relatively small, while the magnitude of uncertainties can be very large (e.g., vehicle-soil interaction). The proposed methodology allows the quantification of uncertainty distributions in both time and frequency domains, and enables the simulations of multibody systems to produce results with 'error bars'. The first part of this study presents the theoretical and computational aspects of the polynomial chaos methodology. Both unconstrained and constrained formulations of multibody dynamics are considered. Direct stochastic collocation is proposed as less expensive alternative to the traditional Galerkin approach. It is established that stochastic collocation is equivalent to a stochastic response surface approach. We show that multi-dimensional basis functions are constructed as tensor products of one-dimensional basis functions and discuss the treatment of polynomial and trigonometric nonlinearities. Parametric uncertainties are modeled by finite-support probability densities. Stochastic forcings are discretized using truncated Karhunen-Loeve expansions. The companion paper 'Modeling Multibody Dynamic Systems With Uncertainties. Part II: Numerical Applications' illustrates the use of the proposed methodology on a selected set of test problems. The overall conclusion is that despite its limitations, polynomial chaos is a powerful approach for the simulation of multibody systems with uncertainties

  19. Net alkalinity and net acidity 1: Theoretical considerations

    International Nuclear Information System (INIS)

    Kirby, Carl S.; Cravotta, Charles A.

    2005-01-01

    Net acidity and net alkalinity are widely used, poorly defined, and commonly misunderstood parameters for the characterization of mine drainage. The authors explain theoretical expressions of 3 types of alkalinity (caustic, phenolphthalein, and total) and acidity (mineral, CO 2 , and total). Except for rarely-invoked negative alkalinity, theoretically defined total alkalinity is closely analogous to measured alkalinity and presents few practical interpretation problems. Theoretically defined 'CO 2 -acidity' is closely related to most standard titration methods with an endpoint pH of 8.3 used for determining acidity in mine drainage, but it is unfortunately named because CO 2 is intentionally driven off during titration of mine-drainage samples. Using the proton condition/mass-action approach and employing graphs to illustrate speciation with changes in pH, the authors explore the concept of principal components and how to assign acidity contributions to aqueous species commonly present in mine drainage. Acidity is defined in mine drainage based on aqueous speciation at the sample pH and on the capacity of these species to undergo hydrolysis to pH 8.3. Application of this definition shows that the computed acidity in mgL -1 as CaCO 3 (based on pH and analytical concentrations of dissolved Fe II , Fe III , Mn, and Al in mgL -1 ):acidity calculated =50{1000(10 -pH )+[2(Fe II )+3(Fe III )]/56+2(Mn) /55+3(Al)/27}underestimates contributions from HSO 4 - and H + , but overestimates the acidity due to Fe 3+ and Al 3+ . However, these errors tend to approximately cancel each other. It is demonstrated that 'net alkalinity' is a valid mathematical construction based on theoretical definitions of alkalinity and acidity. Further, it is shown that, for most mine-drainage solutions, a useful net alkalinity value can be derived from: (1) alkalinity and acidity values based on aqueous speciation (2) measured alkalinity minus calculated acidity, or (3) taking the negative of the

  20. Net alkalinity and net acidity 1: Theoretical considerations

    Science.gov (United States)

    Kirby, C.S.; Cravotta, C.A.

    2005-01-01

    Net acidity and net alkalinity are widely used, poorly defined, and commonly misunderstood parameters for the characterization of mine drainage. The authors explain theoretical expressions of 3 types of alkalinity (caustic, phenolphthalein, and total) and acidity (mineral, CO2, and total). Except for rarely-invoked negative alkalinity, theoretically defined total alkalinity is closely analogous to measured alkalinity and presents few practical interpretation problems. Theoretically defined "CO 2-acidity" is closely related to most standard titration methods with an endpoint pH of 8.3 used for determining acidity in mine drainage, but it is unfortunately named because CO2 is intentionally driven off during titration of mine-drainage samples. Using the proton condition/mass- action approach and employing graphs to illustrate speciation with changes in pH, the authors explore the concept of principal components and how to assign acidity contributions to aqueous species commonly present in mine drainage. Acidity is defined in mine drainage based on aqueous speciation at the sample pH and on the capacity of these species to undergo hydrolysis to pH 8.3. Application of this definition shows that the computed acidity in mg L -1 as CaCO3 (based on pH and analytical concentrations of dissolved FeII, FeIII, Mn, and Al in mg L -1):aciditycalculated=50{1000(10-pH)+[2(FeII)+3(FeIII)]/56+2(Mn)/ 55+3(Al)/27}underestimates contributions from HSO4- and H+, but overestimates the acidity due to Fe3+ and Al3+. However, these errors tend to approximately cancel each other. It is demonstrated that "net alkalinity" is a valid mathematical construction based on theoretical definitions of alkalinity and acidity. Further, it is shown that, for most mine-drainage solutions, a useful net alkalinity value can be derived from: (1) alkalinity and acidity values based on aqueous speciation, (2) measured alkalinity minus calculated acidity, or (3) taking the negative of the value obtained in a

  1. Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis

    International Nuclear Information System (INIS)

    Payri, R.; Salvador, F.J.; Carreres, M.; De la Morena, J.

    2016-01-01

    Highlights: • A 1D model of a solenoid common-rail ballistic injector is implemented in AMESim. • A detailed dimensional and a hydraulic characterization lead to a fair validation. • Fuel temperature influence on injector dynamics is assessed through 1D simulations. • Temperature impacts through changes in inlet orifice regime and viscous friction. • Cold fuel temperature leads to a slower injection opening due to high viscosity. - Abstract: A one-dimensional model of a solenoid-driven common-rail diesel injector has been developed in order to study the influence of fuel temperature on the injection process. The model has been implemented after a thorough characterization of the injector, both from the dimensional and the hydraulic point of view. In this sense, experimental tools for the determination of the geometry of the injector lines and orifices have been described in the paper, together with the hydraulic setup introduced to characterize the flow behaviour through the calibrated orifices. An extensive validation of the model has been performed by comparing the modelled mass flow rate against the experimental results introduced in the first part of the paper, which were performed for different engine-like operating conditions involving a wide range of fuel temperatures, injection pressures and energizing times. In that first part of the study, an important influence of the fuel temperature was reported, especially in terms of the dynamic behaviour of the injector, due to its ballistic nature. The results from the model have allowed to explain and further extend the findings of the experimental study by analyzing key features of the injector dynamics, such as the pressure drop established in the control volume due to the control orifices performance or the forces due to viscous friction, also assessing their influence on the needle lift laws.

  2. Good planning for maximum efficiency. Part 1. Housing development of passive buildings with solar district heat supply; Sauber geplant is halb gewonnen. Teil 1. Passivhaussiedlung mit solarer Nahwaermeversorgung

    Energy Technology Data Exchange (ETDEWEB)

    Meissner, R. [Ritter Energie- und Umwelttechnik, Karlsbad (Germany)

    2003-06-01

    A new development of 12 single-family dwellings was constructed with complex technical facilities and many innovative elements by Gewerbepark Ritter and Messrs. Paradigma, a provider of thermal solar systems. [German] Der Gewerbepark Ritter und die auf thermische Solarindustrie spezialisierte Firma Paradigma haben bei der Errichtung einer Siedlung mit 12 Einfamilienhaeusern mit einem komplexen Haustechnikkonzept ein wegweisendes Projekt mit vielen innovativen Neuerungen erfolgreich in die Tat umgesetzt. (orig.)

  3. Sterilization of health care products - Radiation. Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2006-01-01

    reproducible so that predictions can be made, with reasonable confidence, that there is a low level of probability of there being a viable microorganism present on product after sterilization. Specification of this probability is a matter for regulatory authorities and may vary from country to country (see, for example, EN 556-1 and ANSI/AAMI ST67). Generic requirements of the quality management system for design and development, production, installation and servicing are given in ISO 9001 and particular requirements for quality management systems for medical device production are given in ISO 13485. The standards for quality management systems recognise that, for certain processes used in manufacturing, the effectiveness of the process cannot be fully verified by subsequent inspection and testing of the product. Sterilization is an example of such a process. For this reason, sterilization processes are validated for use, the performance of the sterilization process is monitored routinely and the equipment is maintained. Exposure to a properly validated, accurately controlled sterilization process is not the only factor associated with the provision of reliable assurance that the products are sterile and, in this regard, suitable for its intended use. Attention is therefore given to a number of considerations including: a) the microbiological status of incoming raw materials and/or components; b) the validation and routine control of any cleaning and disinfection procedures used on the product; c) the control of the environment in which the product is manufactured, assembled and packaged; d) the control of equipment and processes; e) the control of personnel and their hygiene; f) the manner and materials in which the product is packaged; g) the conditions under which product is stored. This part of ISO 11137 describes the requirements for ensuring that the activities associated with the process of radiation sterilization are performed properly. These activities are described

  4. Room for Sustainable Agriculture. Part 1 Advice. Part 2 Analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-03-15

    An outline is given of the social dilemmas associated with agriculture and horticulture in the Netherlands. Ongoing innovation and accelerated sustainable development are essential to resolve these dilemmas. Given the importance of the Dutch agriculture and horticulture sector, there is every reason for the central government to play its part and help remove the obstacles to the continuing sustainable development of the sector. The Council recommends that the central government continues developing the Council's vision for agriculture and horticulture with the parties concerned, allows scope for the development of different agricultural business models, applies knowledge and innovation as drivers of continuing sustainable development, amends laws and regulations as necessary, and facilitates a permanent dialogue between the sector and society. The advisory report also sets out the Council's vision concerning the political and public debate on agriculture and horticulture. This debate is most clearly characterised by major and seemingly insurmountable differences of opinion. The Council hopes that its report will induce a shift in thinking about Dutch agriculture among politicians and society at large, so that the transitions considered necessary by the Council can be implemented more rapidly.

  5. Room for Sustainable Agriculture. Part 1 Advice. Part 2 Analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-03-15

    An outline is given of the social dilemmas associated with agriculture and horticulture in the Netherlands. Ongoing innovation and accelerated sustainable development are essential to resolve these dilemmas. Given the importance of the Dutch agriculture and horticulture sector, there is every reason for the central government to play its part and help remove the obstacles to the continuing sustainable development of the sector. The Council recommends that the central government continues developing the Council's vision for agriculture and horticulture with the parties concerned, allows scope for the development of different agricultural business models, applies knowledge and innovation as drivers of continuing sustainable development, amends laws and regulations as necessary, and facilitates a permanent dialogue between the sector and society. The advisory report also sets out the Council's vision concerning the political and public debate on agriculture and horticulture. This debate is most clearly characterised by major and seemingly insurmountable differences of opinion. The Council hopes that its report will induce a shift in thinking about Dutch agriculture among politicians and society at large, so that the transitions considered necessary by the Council can be implemented more rapidly.

  6. Digital dental photography. Part 1: an overview.

    Science.gov (United States)

    Ahmad, I

    2009-04-25

    This paper is the first article in a new ten-part series on digital dental photography. Part 1 previews and outlines the contents of the subsequent papers and in addition, defines the aims and objectives of a digital dental image and the features that are required for an ideal intra-oral picture.

  7. Criteria for prediction of plastic instabilities for hot working processes. (Part I: Theoretical review)

    International Nuclear Information System (INIS)

    Al Omar, A.; Prado, J. M.

    2010-01-01

    Hot working processes often induce high levels of deformation at high strain rates, and impose very complex multiaxial modes of solicitation. These processes are essentially limited by apparition and development of plastic instabilities. These may be the direct cause of rapid crack propagation, which lead to a possible final rupture. The complexity of deformation modes and the simultaneous intervention of several parameters have led many researchers to develop various criteria, with different approaches, to predict the occurrence of defects and to optimize process control parameters. The aim of the present paper is to summarize the general characteristics of some instability criteria, widely used in the literature, for the prediction of plastic instabilities during hot working. It was considered appropriate to divide the work into two parts: part I presents the phenomenological criteria for the prediction of plastic instabilities, based on descriptive observation of microscopic phenomena of the deformation (strain hardening and strain rate sensitivity), and discusses the continuum criteria based on the principle of maximum rate of entropy production of irreversible thermodynamics applied to continuum mechanics of large plastic flow. Also, this part provides a bibliographical discussion among several authors with regard to the physical foundations of dynamic materials model. In part II, of the work, a comparative study has been carried out to characterize the flow instability during a hot working process of a medium carbon microalloyed using phenomenological and continuum criteria. (Author) 83 refs.

  8. Toward an international standard for PCR-based detection of Escherichia coli O157 - Part 1. Assay development and multi-center validation

    DEFF Research Database (Denmark)

    Abdulmawjood, A.; Bulte, M.; Cook, N.

    2003-01-01

    As part of a major European research project, a diagnostic PCR assay, including an internal amplification control, was developed and validated in a collaborative trial for the detection of Escherichia coli O157. The assay is based on amplification of sequences of the rJbE O157 gene. The collabora...

  9. Theoretical atomic physics code development III TAPS: A display code for atomic physics data

    International Nuclear Information System (INIS)

    Clark, R.E.H.; Abdallah, J. Jr.; Kramer, S.P.

    1988-12-01

    A large amount of theoretical atomic physics data is becoming available through use of the computer codes CATS and ACE developed at Los Alamos National Laboratory. A new code, TAPS, has been written to access this data, perform averages over terms and configurations, and display information in graphical or text form. 7 refs., 13 figs., 1 tab

  10. PREFACE: 1st International Workshop on Theoretical and Computational Physics: Condensed Matter, Soft Matter and Materials Physics & 38th National Conference on Theoretical Physics

    Science.gov (United States)

    2014-09-01

    This volume contains selected papers presented at the 38th National Conference on Theoretical Physics (NCTP-38) and the 1st International Workshop on Theoretical and Computational Physics: Condensed Matter, Soft Matter and Materials Physics (IWTCP-1). Both the conference and the workshop were held from 29 July to 1 August 2013 in Pullman hotel, Da Nang, Vietnam. The IWTCP-1 was a new activity of the Vietnamese Theoretical Physics Society (VTPS) organized in association with the 38th National Conference on Theoretical Physics (NCTP-38), the most well-known annual scientific forum dedicated to the dissemination of the latest development in the field of theoretical physics within the country. The IWTCP-1 was also an External Activity of the Asia Pacific Center for Theoretical Physics (APCTP). The overriding goal of the IWTCP is to provide an international forum for scientists and engineers from academia to share ideas, problems and solution relating to the recent advances in theoretical physics as well as in computational physics. The main IWTCP motivation is to foster scientific exchanges between the Vietnamese theoretical and computational physics community and world-wide scientists as well as to promote high-standard level of research and education activities for young physicists in the country. About 110 participants coming from 10 countries participated in the conference and the workshop. 4 invited talks, 18 oral contributions and 46 posters were presented at the conference. In the workshop we had one keynote lecture and 9 invited talks presented by international experts in the fields of theoretical and computational physics, together with 14 oral and 33 poster contributions. The proceedings were edited by Nguyen Tri Lan, Trinh Xuan Hoang, and Nguyen Ai Viet. We would like to thank all invited speakers, participants and sponsors for making the conference and the workshop successful. Nguyen Ai Viet Chair of NCTP-38 and IWTCP-1

  11. A concept for the development of piezoceramic materials based on lead zirconate titanate (PZT). Part 1; Ein Entwicklungskonzept piezokeramischer Werkstoffe auf der Basis von Gleizirkonattitanat (PZT). Teil 1

    Energy Technology Data Exchange (ETDEWEB)

    Helke, G. [CeramTec AG, Lauf a.d. Pegnitz (Germany)

    2002-07-01

    Piezoceramic ceramics based on Lead Zircontate Titanate (PZT) show - within a relatively close Zr/Ti ratio range (close to the ratio 0.5/0.5) - extreme values for remanent polarization P{sub r} and the dielectric coefficient {epsilon}{sub 33}{sup {tau}}/{epsilon}{sub 0} as well as their corresponding piezoelectric coefficients. Remanent polarization P{sub t} can be directly correlated to the structural parameter {delta} (spontaneous deformation) and the domain mobility {eta}. PZT modification results from the substitution of isovalent or heterovalent ions, thereby taking ion radii and valency at the A and B sites of the perovskite-type lattice under consideration. The substitution of specific ions is the process used to develop new piezoceramic materials which is mainly applied to determine the values of specific parameters corresponding to technical requirements. (orig.) [German] Piezoelektrische Keramiken auf der Basis von Bleizirkonattitanat (PZT) weisen in einem relativ engen Bereich des Zr/Ti-Verhaeltnisses (nahe dem Verhaeltnis 0,5/0,5). Extremwerte der remanenten Polarisation P{sub r} und der Dielektrizitaetskonstanten {epsilon}{sub 33}{sup {tau}}/{epsilon}{sub 0} sowie der von ihnen abhaengigen piezoelektrischen Kenngroessen auf. Die remanente Polarisation P{sub r} laesst sich unmittelbar dem Strukturparameter {delta} (spontane Deformation) und der Domaenenbeweglichkeit {eta} zuordnen. Die Modifikation von PZT erfolgt durch Substitution isovalenter oder heterovalenter Ionen unter Beruecksichtigung von Ionenradien und -wertigkeit auf A- und B-Plaetzen des Perowskigitters. Die Substitution bestimmter Ionen ist das Verfahren zur Schaffung neuer piezokeramischer Werkstoffe und wird insbesondere zur Einstellung der Werte einzelner Kenngroessen auf einem bestimmten Niveau entsprechend den technischen Anforderungen angewendet. (orig.)

  12. Theoretical atomic physics code development I: CATS: Cowan Atomic Structure Code

    International Nuclear Information System (INIS)

    Abdallah, J. Jr.; Clark, R.E.H.; Cowan, R.D.

    1988-12-01

    An adaptation of R.D. Cowan's Atomic Structure program, CATS, has been developed as part of the Theoretical Atomic Physics (TAPS) code development effort at Los Alamos. CATS has been designed to be easy to run and to produce data files that can interface with other programs easily. The CATS produced data files currently include wave functions, energy levels, oscillator strengths, plane-wave-Born electron-ion collision strengths, photoionization cross sections, and a variety of other quantities. This paper describes the use of CATS. 10 refs

  13. Theoretical Studying the Cyclic Loading of Electric Drive Parts of the Stand duo-160

    Directory of Open Access Journals (Sweden)

    A. A. Maltsev

    2015-01-01

    Full Text Available An electric drive of work rolls of the single-stand rolling mill duo-160 located in the laboratory of Bauman Moscow State Technical University (BMSTU is selected as an object of the theoretical study. After the work rolls have gripped the work-piece the torsional vibrations occur in the drive; a 5-mass dynamic model is built to determine their forms and frequencies. Equations of torsionalvibration movement of masses with time are based on the Lagrange equations of type II. The paper identifies intrinsic moments of inertia and angular stiffness of parts and units of the electric drive. The graphs of the moments of elastic forces are built taking into consideration the dampers and backlashes. A revealed transition process has shown that given amplitudes of the cyclic shear stresses arising in dangerous section of the most loaded top spindle do not exceed the limit of its endurance in this section. In case of excess revealed, it would lead to accumulation of fatigue damage in the spindle metal and to formation of fatigue crack that most probably would appear near the shaft surface rather than in the metal mass. With further using the electric drive this micro-crack would be gradually evolved into macro-crack, the working cross-sectional area of the shaft would be reduced so that there would be a spindle failure and on the surface of a fatigue fracture of its shaft a strongly marked crack growth zone and a completely broken zone would be observed.

  14. THE EASTERN PARTNERSHIP AS PART OF THE EU FOREIGN POLICY: A REVIEW OF THEORETICAL APPROACHES

    Directory of Open Access Journals (Sweden)

    Andrei SCRINIC

    2014-10-01

    Full Text Available The Eastern Partnership (2009 as a component part of the European Neighbourhood Policy is a tool that aims at the economic integration and political cooperation of the countries that are included in this project by signing association and free trade agreements with the European Union (EU. The recent events in Ukraine have revealed the possibility of these countries to become EU member states depending on the progress made, which is confirmed by many European experts. However, there are big differences among the Eastern Partnership countries on their way to EU integration on the background of the strong pressure from Russia, aimed to suppress any pro-European manifestations of such countries. Despite the sharpening of geopolitical challenges, the EU continues to use the traditional ways of enlargement and deepening of cooperation processes with the Eastern Neighbourhood. This paper aims at reviewing the theoretical approaches through which the EU, as a normative power, exerts major influence on the Eastern Partnership (EaP countries by extending the neofunctional practices, intergovernmental cooperation and the constructivist model. However, in view of reaching the soft power objectives, we aim at transforming and strengthening the EU positions in the context of amplified economic and political-ideological problems at regional level.

  15. Optimal Learning in Schools--Theoretical Evidence: Part 1 Piaget's Theoretical Background

    Science.gov (United States)

    Crossland, John

    2016-01-01

    The research questions a teacher would ask of neuroscience require answers researched within a typical classroom context. Unfortunately this research has rarely been available. The Education Endowment Foundation recently set up six projects applying evidence from neuroscience and educational studies to the classroom context. Most of the evaluation…

  16. Theoretical and Experimental Research Performed on the Tesla Turbine - Part I

    Directory of Open Access Journals (Sweden)

    Dorian Nedelcu

    2015-09-01

    Full Text Available The paper presents the theoretical and experimental research performed on a Tesla turbine driven by compressed air and designed to equip a teaching laboratory [1], [2]. It introduces the operating principle of the Tesla turbine, which was invented by engineer Nikola Tesla, a turbine which uses discs instead of blades, mounted on a shaft at a small distance between them. The turbine geometry, results from stress and flow calculations performed on the turbine rotor and assembly, using the Simulation modules and SolidWorks Flow Simulation program are presented. After designing the turbine, it becomes the subject of experimental research to determine the curve of the speed depending on the pressure. Also, the experimental research focuses on the behaviour of the turbine from a dynamic point of view [3].

  17. Development of non-linear TWB parts

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.; Yoon, C.S.; Lim, J.D. [Hyundai Motor Company and Kia Motors Corp. (Korea). Advanced Technology Center; Park, H.C. [Hyundai Hysco (Korea). Technical Research Lab.

    2005-07-01

    New manufacturing methods have applied for automotive parts to reduce total weight of car, resulting in improvement of fuel efficiency. TWB technique is applied to auto body parts, especially door inner, side inner and outer panel, and center floor panel to accomplish this goal. We applied non-linear (circular welded) TWB to shock absorber housing (to reduce total weight of shock absorber housing assembly). Welding line and shape of blank were determined by FEM analysis. High formability steel sheet and 440MPa grade high strength steel sheet were laser welded and press formed to final shock absorber housing (S/ABS HSG) panel and assembled with other sub parts. As a result, more than 10% of total weight of shock absorber housing assembly could be reduced compared with the mass of same part manufactured by conventional method. Also circular welding technique made it possible to design optimum welding line of TWB part. This paper is about result of FEM analysis and development procedure of non-linear TWB part (shock absorber housing assembly). (orig.)

  18. Fixed-film processes. Part 1

    International Nuclear Information System (INIS)

    Canziani, R.

    1999-01-01

    Recently, full scale fixed-film or mixed suspended and fixed biomass bioreactors have been applied in many wastewater treatments plants. These process no longer depend on biomass settle ability and can be used to improve the performance of existing plants as required by more stringent discharge permit limits, especially for nutrients and suspended solid. Also, processes may work at high rates making it possible to build small footprint installations. Fixed-film process include trickling filter, moving bed reactors fluidized bed reactors. In the first part, the theoretical base governing fixed-film processes are briefly outlined with some simple examples of calculations underlining the main differences with conventional activated sludge processes [it

  19. Olkiluoto site description 2008. Part 1

    International Nuclear Information System (INIS)

    2009-04-01

    This third version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2006 (Andersson et al. 2007) with the data and knowledge obtained up to December 2007. The main product of the modelling has been to develop an updated version of the descriptive model of the site (the Site Descriptive Model), i.e. a model describing the geometry, properties of the bedrock and the water and the associated interacting processes and mechanisms. The Site Descriptive Model is divided into six parts: the surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and migration, which are presented in individual chapters. Five separated models are presented: the geological, rock mechanics, hydrogeological, hydrogeochemical and migration models. The main advances since Site Report 2006 are: (1) The geological model has been revised according to new data and interpretations. This has improved the consistency between the locations of the deformation zones in the geological model and the hydraulic zones in the hydrogeological model, (2) New 3D seismic data have been incorporated within the geological model and an initial model for the eastern part of the Island is presented. Site-scale brittle deformation zones are extrapolated to intersect the surrounding regional lineaments, unless prohibited by direct observations to the contrary. The alteration model has been revised, showing a clear correspondence between the illitisation and the sitescale fault zones, (3) A first account of the development of the brittle deformation history of the site is provided, (4) A new geological DFN model has been developed, that considers mapped fracture traces from both the surface and the ONKALO, (5) A new stress state model and fracture and fracture zone properties are presented, (6) A new hydrogeological DFN model has been developed, (7) An updated site scale (EPM) flow model has been developed, (8) There has been an

  20. Theoretical Semi-Empirical AM1 studies of Schiff Bases

    International Nuclear Information System (INIS)

    Arora, K.; Burman, K.

    2005-01-01

    The present communication reports the theoretical semi-empirical studies of schiff bases of 2-amino pyridine along with their comparison with their parent compounds. Theoretical studies reveal that it is the azomethine group, in the schiff bases under study, that acts as site for coordination to metals as it is reported by many coordination chemists. (author)

  1. Genistein in 1:1 Inclusion Complexes with Ramified Cyclodextrins: Theoretical, Physicochemical and Biological Evaluation

    Directory of Open Access Journals (Sweden)

    Corina Danciu

    2014-01-01

    Full Text Available Genistein is one of the most studied phytocompound in the class of isoflavones, presenting a notable estrogenic activity and in vitro and/or in vivo benefits in different types of cancer such as those of the bladder, kidney, lung, pancreatic, skin and endometrial cancer. A big inconvenience for drug development is low water solubility, which can be solved by using hydrophilic cyclodextrins. The aim of this study is to theoretically analyze, based on the interaction energy, the possibility of a complex formation between genistein (Gen and three different ramified cyclodextrins (CD, using a 1:1 molar ratio Gen:CD. Theoretical data were correlated with a screening of both in vitro and in vivo activity. Proliferation of different human cancer cell lines, antimicrobial activity and angiogenesis behavior was analyzed in order to see if complexation has a beneficial effect for any of the above mentioned activities and if so, which of the three CDs is the most suitable for the incorporation of genistein, and which may lead to future improved pharmaceutical formulations. Results showed antiproliferative activity with different IC50 values for all tested cell lines, remarkable antimicrobial activity on Bacillus subtilis and antiangiogenic activity as revealed by CAM assay. Differences regarding the intensity of the activity for pure and the three Gen complexes were noticed as explained in the text. The data represent a proof that the three CDs can be used for furtherer research towards practical use in the pharmaceutical and medical field.

  2. Absorption of negative pions resting on nuclei of the 1p layer. Theoretical and experimental aspects

    International Nuclear Information System (INIS)

    Coupat, Bernard

    1981-01-01

    As the probability of capture of π- resting on 12 C with emission of a single proton which has been measured on the Saclay Linear Accelerator (ALS), is relatively high, it was obvious that this reaction type was based on a mechanism involving two nucleons. Due to the lack of theoretical interpretation for the emission of a single nucleon, a model has been developed in which the pion is absorbed by a correlated proton-proton pair, only one of these both protons being emitted. The first part of this research thesis addresses the calculation of absorption on a pair of nucleons with emission of these nucleons. It comprises the detailed presentation of the theoretical model, its comparison with other published calculations, and the comparison with results obtained by experiments of emission of nucleon pairs from carbon and oxygen. The second part proposes an overview of the great number of experimental results obtained by capture of π- resting on carbon. It reports the measurement of the emission of a single nucleon, the presentation of the elaborated theoretical model which has been developed to interpret this measurement. The author also compares the results of his calculation with the experimentally measured probability for the (π - p) process and the results published on the measurement of the (π - n).reaction [fr

  3. [Conceptual Development in Cognitive Science. Part II].

    Science.gov (United States)

    Fierro, Marco

    2012-03-01

    Cognitive science has become the most influential paradigm on mental health in the late 20(th) and the early 21(st) centuries. In few years, the concepts, problem approaches and solutions proper to this science have significantly changed. Introduction and discussion of the fundamental concepts of cognitive science divided in four stages: Start, Classic Cognitivism, Connectionism, and Embodying / Enacting. The 2(nd) Part of the paper discusses the above mentioned fourth stage and explores the clinical setting, especially in terms of cognitive psychotherapy. The embodying/enacting stage highlights the role of the body including a set of determined evolutionary movements which provide a way of thinking and exploring the world. The performance of cognitive tasks is considered as a process that uses environmental resources that enhances mental skills and deploys them beyond the domestic sphere of the brain. On the other hand, body and mind are embedded in the world, thus giving rise to cognition when interacting, a process known as enacting. There is a close connection between perception and action, hence the interest in real-time interactions with the world rather than abstract reasoning. Regarding clinics, specifically the cognitive therapy, there is little conceptual discussion maybe due to good results from practice that may led us to consider that theoretical foundations are firm and not problem-raising. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  4. Research and development of superhigh-technological processing systems in fiscal 989 (1.2). Development of devices for highly processing power generating facility parts (1.2.3); Chosentan kako system no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-03-01

    Described herein are the results of the research and development project for developing superhigh-technological processing systems, and devices for highly processing power generating facility parts.The R and D project for the superhigh-technological processing systems involves short-wavelength exima lasers for the techniques to expand their serviceability and improve their qualities; highly focused, wide-band energy ion beams for gas-phase focused ion beams and large-capacity cluster ion beams; superprecision machining for investigations on superprecision machining elements; techniques for forming and laminating thin films; high-speed surface modification of the stock materials; supporting techniques; and total systems. The R and D for the devices for highly processing power generating facility parts include investigations on the techniques for expanding serviceability of high-output exima lasers serving repeatedly for extended periods, and the techniques allowing the devices serviceable repeatedly for extended periods. The other R and D items include the techniques for light-resistant, high-strength elements, large-current ion beams, and reshaping by exima laser beams. (NEDO)

  5. [Participatory education and the development of critical reading in teachers theoretical texts. Multicenter study].

    Science.gov (United States)

    Leyva-González, Félix Arturo; Leo-Amador, Guillermo Enrique; Viniegra-Velázquez, Leonardo; Degollado-Bardales, Lilia; Zavala-Arenas, Jesús Arturo; González-Cobos, Roberto Palemón; Valencia-Sánchez, Jesús Salvador; Leyva-Salas, César Arturo; Angulo-Bernal, Sonia Elizabeth; Gómez-Arteaga, Gress Marissell

    2010-01-01

    Determine what the relationship between participation in classroom of students attending courses at the Educational Research and Teacher Education (CIEFD's) and the development of proficiency in critical reading of theoretical texts in education. Intervention study, multicenter students (medical specialist) level Diploma in teaching methodology (DMDN) 1 and 2 (n=46 n=29) of the six CIEFD's (DF Siglo XXI, Mexico City La Raza, Nuevo Leon, Sonora, Puebla and Veracruz), period: March to August 2007 and a Masters in education (n=9, generation 2007-2008). Two instruments were constructed that evaluated the participation variables and critical reading of theoretical texts in education, conceptual validity; content and reliability were assessed by experts in education research. The educational intervention was in the form of seminars (three times a week in DMDN 1 and twice weekly in DMDN 2 and Masters). Participation was assessed halfway through the course and on completion, critical reading at the beginning as well as the end. Statistically significant associations were observed in DMDN 1 (four Centers) and the Masters, but not DMDN 2. In this investigation some of the theoretical proposals of the participatory education were recreated, starting from the analysis of our results. In some centers and in the masters, strengthening participation in this educational intervention is related to the development of critical reading of theoretical texts in education.

  6. [Systemic inflammation: theoretical and methodological approaches to description of general pathological process model. Part 3. Backgroung for nonsyndromic approach].

    Science.gov (United States)

    Gusev, E Yu; Chereshnev, V A

    2013-01-01

    Theoretical and methodological approaches to description of systemic inflammation as general pathological process are discussed. It is shown, that there is a need of integration of wide range of types of researches to develop a model of systemic inflammation.

  7. Aprende Ajedrez con Rey - Parte 1

    OpenAIRE

    ESTÉVEZ MONTERO, RAÚL; Lloret Mauri, Jaime

    2016-01-01

    Es una pieza audiovisual creada con el objeto de atraer la atención de los niños de muy corta edad con el ajedrez y familiarizarlos con todas sus piezas y movimientos. Es una animación dirigida a un público infantil presentada por dibujos animados en 2D, en la que se ha intentado respetar en todo momento el argot de la comunidad ajedredística. En este video se presenta la primera parte. Estévez Montero, R.; Lloret Mauri, J. (2016). Aprende Ajedrez con Rey - Parte 1. http://hdl.handle.net/1...

  8. Internet Use and Cognitive Development: A Theoretical Framework

    Science.gov (United States)

    Johnson, Genevieve

    2006-01-01

    The number of children and adolescents accessing the Internet as well as the amount of time online are steadily increasing. The most common online activities include playing video games, accessing web sites, and communicating via chat rooms, email, and instant messaging. A theoretical framework for understanding the effects of Internet use on…

  9. Dental photography today. Part 1: basic concepts.

    Science.gov (United States)

    Casaglia, A; DE Dominicis, P; Arcuri, L; Gargari, M; Ottria, L

    2015-01-01

    This paper is the first article in a new series on digital dental photography. Part 1 defines the aims and objectives of dental photography for examination, diagnosis and treatment planning, legal and forensic documentation, publishing, education, marketing and communication with patients, dental team members, colleagues and dental laboratory.

  10. Theoretical development of information science: A brief history

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    the strongest “paradigms” in the field is a tradition derived from the Cranfield experiments in the 1960s and the bibliometric research following the publication of Science Citation Index from 1963 and forward. Among the competing theoretical frameworks, ‘the cognitive view’ became influential from the 1970s......This paper presents a brief history of information science (IS) as viewed by the author. The term ‘information science’ goes back to 1955 and evolved in the aftermath of Claude Shannon’s ‘information theory’ (1948), which also inspired research into problems in fields of library science...... and documentation. These subjects were a main focus of what became established as ‘information science’, which from 1964 onwards was often termed ‘library and information science’ (LIS). However, the usefulness of Shannon’s information theory as the theoretical foundation of the field was been challenged. Among...

  11. Joint federal research and development process to meet state and local needs. Part 1. Science and technology and political decision making

    Energy Technology Data Exchange (ETDEWEB)

    Wise, H F; Smith, L K; Einsweiler, R C; Jensen, D E

    1980-10-01

    This part of the handbook addresses the basic how to do it - how states and local governments can identify complex and cross-cutting issues and develop and manage scientific and technical resources in seeking policy solutions to such issues. The following subjects are discussed: background statement of the issue; the research/decision-making process; defining problems and identifying research components; research and decision-making strategies; how to identify existing knowledge or ongoing research in the area of policy concern; and managing multi-disciplinary research. The fourteen agencies involved in this effort include: US Departments of Energy, Agriculture, Transportation, Housing and Urban Development, Environmental Protection Agency, and National Science Foundation. (PSB)

  12. Need for appropriate formulations for children: the national institute of child health and human development-pediatric formulations initiative, part 1.

    Science.gov (United States)

    Giacoia, George P; Taylor-Zapata, Perdita; Mattison, Donald

    2007-01-01

    The development and compounding of pharmacotherapeutic formulations that are suitable for infants and young children can be a challenging problem. This problem results from the lack of knowledge on the acceptability of different dosage forms and formulations in children in relation to age and developmental status, as well as the lack of reliable documentation of formulations used in pediatric clinical trials. As part of its mandate under the Best Pharmaceuticals for Children Act to improve pediatric therapeutics, the National Institute of Child Health and Human Development has sponsored the Pediatric Formulation Initiative. The goal of this ongoing initiative is to address the issues and concnerns associated with pediatric therapeutics by convening groups of researchers and experts in pediatric formulations from academia, pharmaceutical companies, the National Institutes of Health, and the U.S. Food and Drug Administration.

  13. LOREF: Air cooler optimisation with reduction of ice and frost formation - Optimisation of lamella air-coolers/evaporators of air/water heat pumps - Part 1: theoretical and experimental research; LOREF: Luftkuehler-Optimierung mit Reduktion von Eis- und Frostbildung - Optimierung des Lamellenluftkuehlers/Verdampfers von Luft/Wasser-Waermepumpen - Teil 1: theoretische und experimentelle Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Berlinger, L.; Imholz, M.; Albert, M.; Wellig, B.; Hilfiker, K.

    2008-04-15

    The use of air/water heat pumps for heating of houses is progressively increasing. It is to be expected that the average coefficient of performance (COP) can be improved substantially over the next decade. Its success will depend on controlling and reducing the formation of frost and ice which reduce the air flow and the heat and mass transfer in the fin tube evaporator. In the LOREF research project a mathematical-physical simulation program has been developed which permits to calculate the formation of condensate, ice and frost and also the pressure loss of the air as a function of space and time at any condition of the ambient air. The theoretical results have been validated by numerous experiments in which the air temperature and humidity, the temperature difference and the air velocity have been systematically varied. Particular emphasis has been given to the geometries of the fin tube evaporator. Several fin partitions along the cooler have been investigated. Using the simulation program the evaporator of a commercial heat pump was optimized and experimentally compared to the original evaporator. The resulting seasonal performance factors were nearly equal what confirms the small differences obtained by simulations. Nevertheless, the optimized evaporator features advantages in respect of the defrosting with ambient air because of its bigger fin spacing and the resulting decrease in pressure drop. The results of the LOREF research project are now the basis for the overall optimization of air/water heat pumps. (author)

  14. Self, College Experiences, and Society: Rethinking the Theoretical Foundations of Student Development Theory

    Science.gov (United States)

    Winkle-Wagner, Rachelle

    2012-01-01

    This article examines the psychological theoretical foundations of college student development theory and the theoretical assumptions of this framework. A complimentary, sociological perspective and the theoretical assumptions of this approach are offered. The potential limitations of the overuse of each perspective are considered. The conclusion…

  15. Workplace Bullying in Healthcare: Part 1.

    Science.gov (United States)

    Lamberth, Becky

    2015-01-01

    Bullying is a repetitive and a busive behavior in which the victim suffers from abuse, humiliation, or intimidation to such an extent that it interferes with job performance. Victims of bullying have three possible legal solutions: harassment, hostile work environment, and intentional/negligent infliction of emotional distress. However, the elements necessary to fulfill the legal definitions are subjective and difficult at best to satisfy. Hospitals are hesitant to terminate any employee, which would result in open staff positions that are difficult to fill. Replacing staff with specific skills, costly. This make recruitmen cost a significant factor in retaining staff members who demonstrate poor behavior. Part 1 will focus on terminology and concerns related to bullying. Part 2 will discuss the legal protection afforded the bully and possible organizational solutions. Part 3 will address managers who have been accused of bullying by disgruntled employees and what to do about it.

  16. Fundamental U-Theory of Time. Part 1

    Directory of Open Access Journals (Sweden)

    Yuvraj J. Gopaul

    2016-02-01

    Full Text Available The Fundamental U-Theory of Time (Part 1 is an original theory that aims to unravel the mystery of what exactly is ‘time’. To date very few explanations, from the branches of physics or cosmology, have succeeded to provide an accurate and comprehensive depiction of time. Most explanations have only managed to provide partial understanding or at best, glimpses of its true nature. The U-Theory uses ‘Thought Experiments’ to uncover the determining characteristics of time. In part 1 of this theory, the focus is not on the mathematics as it is on the accuracy of the depiction of time. Moreover, it challenges current views on theoretical physics, particularly on the idea of ‘time travel’. Notably, it is a theory seeking to present a fresh approach for reviewing Einstein’s Theory of Relativity, while unlocking new pathways for upcoming research in the field of physics and cosmology.

  17. Calculus: A Computer Oriented Presentation, Part 1 [and] Part 2.

    Science.gov (United States)

    Stenberg, Warren; Walker, Robert J.

    Parts one and two of a one-year computer-oriented calculus course (without analytic geometry) are presented. The ideas of calculus are introduced and motivated through computer (i.e., algorithmic) concepts. An introduction to computing via algorithms and a simple flow chart language allows the book to be self-contained, except that material on…

  18. Proceedings of NUCLEAR 2013 the 6th annual international conference on sustainable development through nuclear research and education. Part 1/3

    International Nuclear Information System (INIS)

    Constantin, Marin; Turcu, Ilie

    2013-01-01

    The proceedings of the NUCLEAR 2013 international conference on sustainable development through nuclear research and education held at INR-Pitesti on May, 2-24 2013 contain 79 communications presented in two plenary sessions (6 and 8 talks, respectively) and three sections addressing the themes of Nuclear energy, Environmental protection, and Sustainable development . In turn these sections are addressing the following items: Section 1.1 - Nuclear Technology and Materials (33 papers); Section 1.2 Nuclear Safety and Sever Accidents (16 papers); 1.3 Nuclear Reactors and Gen IV (20 papers); 2.1 Radioactive Waste Management (13 papers); 2.2 Radioprotection and 2.3 Air, Water, Soil Protection (17 papers); 3.1 Polices and Strategies in Nuclear Research (0 papers); 3.2 International Partnership for a Sustainable Development (2 papers); 3.3 Education, Continuous Formation and Knowledge Transfer (1 papers). These papers are presented as abstracts in 'Nuclear 2013 - Book of Abstracts', separately processed

  19. Evaluation of automated decisionmaking methodologies and development of an integrated robotic system simulation, volume 2, part 1. Appendix A: Software documentation

    Science.gov (United States)

    Lowrie, J. W.; Fermelia, A. J.; Haley, D. C.; Gremban, K. D.; Vanbaalen, J.; Walsh, R. W.

    1982-01-01

    Documentation of the preliminary software developed as a framework for a generalized integrated robotic system simulation is presented. The program structure is composed of three major functions controlled by a program executive. The three major functions are: system definition, analysis tools, and post processing. The system definition function handles user input of system parameters and definition of the manipulator configuration. The analysis tools function handles the computational requirements of the program. The post processing function allows for more detailed study of the results of analysis tool function executions. Also documented is the manipulator joint model software to be used as the basis of the manipulator simulation which will be part of the analysis tools capability.

  20. A guide to GALAXY 5 part 1

    International Nuclear Information System (INIS)

    Price, J.A.

    1975-11-01

    GALAXY 6 Part 1 is a program, written in Fortran IV language, to compute spectrum-weighted, group-averaged nuclear cross-sections and group-to-group transfer cross-sections from the evaluated microscopic cross-section data contained in the UKAEA Nuclear Data Library. A description is given of the input and output schemes and operating procedures for the IBM 370/168, together with the structure and functioning of the program and other relevant topics. (author)

  1. NACHOS: a finite element computer program for incompressible flow problems. Part I. Theoretical background

    International Nuclear Information System (INIS)

    Gartling, D.K.

    1978-04-01

    The theoretical background for the finite element computer program, NACHOS, is presented in detail. The NACHOS code is designed for the two-dimensional analysis of viscous incompressible fluid flows, including the effects of heat transfer. A general description of the fluid/thermal boundary value problems treated by the program is described. The finite element method and the associated numerical methods used in the NACHOS code are also presented. Instructions for use of the program are documented in SAND77-1334

  2. Internal combustion engine exhaust pipe flow simulation. Part I: theoretical aspects

    OpenAIRE

    Juan Miguel Mantilla; Camilo Andrés Falla; Jorge Arturo Gómez

    2010-01-01

    Unsteady gas flow theory can be used for simulating a spark ignition internal combustion engine’s exhaust system, using pressure waves. The method explained here is based on the discretization of interpolated spaces (called meshes) which are located throughout the whole length of the exhaust pipe, irrespective of its form or size. The most important aspects of this theory are theoretically explored, such as pressure wave movement and shock and their application to cases found in re...

  3. Internal combustion engine exhaust pipe flow simulation. Part I: theoretical aspects

    OpenAIRE

    Juan Miguel Mantilla; Camilo Andrés Falla; Jorge Arturo Gómez

    2009-01-01

    Unsteady gas flow theory can be used for simulating a spark ignition internal combustion engine’s exhaust system, using pressure waves. The method explained here is based on the discretization of interpolated spaces (called meshes) which are located throughout the whole length of the exhaust pipe, irrespective of its form or size. The most important aspects of this theory are theoretically explored, such as pressure wave movement and shock and their application to cases found in real engines’...

  4. Theoretical temperature fields for the Stripa heater project. Vol. 1

    International Nuclear Information System (INIS)

    Chan, T.; Cook, N.G.W.; Tsang, C.F.

    1978-09-01

    The report concerns thermal conduction calculations for the three in-situ heater experiments at Stripa which constitute part of the Swedish-American Cooperative Program on Radioactive Waste Storage in Mined Caverns. A semianalytic solution based on the Green's function method has been developed for an array of arbitrary time-dependent finite line heaters in a semi-infinite medium. This method as well as a three dimensional numerical model using IFD (Integrated Finite Difference) technique has been applied to model the field situations at Stripa. Comparison has demonstrated that the finite line source solution for the rock temperature is in excellent agreement with the numerical model solution as well as with a closed form finite cylinder source solution. It was found that maximum temperature rise in the rock within the two year experiment period will be 178 0 C for the 3.6 kW full-scale heater experiment, 345 0 C for the full-scale experiment with a 5 kW central heater and eight 0.72 kW peripheral heaters, and less than 200 0 C for the time-scaled experiment. The ring of eight peripheral heaters in the second full-scale experiment will provide a nominally uniform temperature rise within its perimeter a few weeks after turn-on. The high temperature zone is localized throughout the duration of all three experiments. Nevertheless, the effect of different spacings on the thermal interaction between adjacent radioactive waste canisters will be demonstrated by the time-scaled experiment. Detailed results are presented in the form of tables, temperature profiles and contour plots. Predicted temperatures have been stored in an on-site computer for real-time comparison with field data. 56 figures, 7 tables

  5. Visualizing Forensic Data : Evidence Guidelines (Part 1

    Directory of Open Access Journals (Sweden)

    Damian Schofield

    2013-03-01

    Full Text Available Visualisation is becoming increasingly important for understanding information, such as investigative data (for example: computing, medical and crime scene evidence and analysis (for example: network capability assessment, data file reconstruction and planning scenarios. Investigative data visualisation is used to reconstruct a scene or item and is used to assist the viewer (who may well be a member of the general public with little or no understanding of the subject matter to understand what is being presented. Analysis visualisations, on the other hand, are usually developed to review data, information and assess competing scenario hypotheses for those who usually have an understanding of the subject matter. Visualisation represents information that has been digitally recorded (for example: pictures, video and sound, hand written and/or spoken data, to show what may have, could have, did happen or is believed to have happened. That is why visualising data is an important development in the analysis and investigation realms, as visualisation explores the accuracies, inconsistencies and discrepancies of the collected data and information. This paper presents introduces some of the various graphical techniques and technology used to display digital information in a courtroom. The advantages and disadvantages involved in the implementation of this technology are also discussed. This paper is part one of a two part series that aims to describe the use of, and provide guidelines for, the use of graphical displays in courtrooms.

  6. The Mid America Heart Institute: part 1.

    Science.gov (United States)

    McCallister, Ben D; Steinhaus, David M

    2003-01-01

    The Mid America Heart Institute (MAHI) is one of the first and largest hospitals developed and designed specifically for cardiovascular care. The MAHI hybrid model, which is a partnership between the not-for-profit Saint Luke's Health System, an independent academic medical center, and a private practice physician group, has been extremely successful in providing high-quality patient care as well as developing strong educational and research programs. The Heart Institute has been the leader in providing cardiovascular care in the Kansas City region since its inception in 1975. Although challenges in the future are substantial, it is felt that the MAHI is in an excellent position to deal with the serious issues in health care because of the Heart Institute, its facility, organization, administration, dedicated medical and support staff, and its unique business model of physician management. In part I, the authors describe the background and infrastructure of the Heart Institute. In part II, cardiovascular research and benefits of physician management will be addressed.

  7. Spline approximation, Part 1: Basic methodology

    Science.gov (United States)

    Ezhov, Nikolaj; Neitzel, Frank; Petrovic, Svetozar

    2018-04-01

    In engineering geodesy point clouds derived from terrestrial laser scanning or from photogrammetric approaches are almost never used as final results. For further processing and analysis a curve or surface approximation with a continuous mathematical function is required. In this paper the approximation of 2D curves by means of splines is treated. Splines offer quite flexible and elegant solutions for interpolation or approximation of "irregularly" distributed data. Depending on the problem they can be expressed as a function or as a set of equations that depend on some parameter. Many different types of splines can be used for spline approximation and all of them have certain advantages and disadvantages depending on the approximation problem. In a series of three articles spline approximation is presented from a geodetic point of view. In this paper (Part 1) the basic methodology of spline approximation is demonstrated using splines constructed from ordinary polynomials and splines constructed from truncated polynomials. In the forthcoming Part 2 the notion of B-spline will be explained in a unique way, namely by using the concept of convex combinations. The numerical stability of all spline approximation approaches as well as the utilization of splines for deformation detection will be investigated on numerical examples in Part 3.

  8. Development of a theoretical framework for analyzing cerebrospinal fluid dynamics

    Directory of Open Access Journals (Sweden)

    Vedel Søren

    2009-09-01

    Full Text Available Abstract Background To date hydrocephalus researchers acknowledge the need for rigorous but utilitarian fluid mechanics understanding and methodologies in studying normal and hydrocephalic intracranial dynamics. Pressure volume models and electric circuit analogs introduced pressure into volume conservation; but control volume analysis enforces independent conditions on pressure and volume. Previously, utilization of clinical measurements has been limited to understanding of the relative amplitude and timing of flow, volume and pressure waveforms; qualitative approaches without a clear framework for meaningful quantitative comparison. Methods Control volume analysis is presented to introduce the reader to the theoretical background of this foundational fluid mechanics technique for application to general control volumes. This approach is able to directly incorporate the diverse measurements obtained by clinicians to better elucidate intracranial dynamics and progression to disorder. Results Several examples of meaningful intracranial control volumes and the particular measurement sets needed for the analysis are discussed. Conclusion Control volume analysis provides a framework to guide the type and location of measurements and also a way to interpret the resulting data within a fundamental fluid physics analysis.

  9. Theoretical Model of Development of Information Competence among Students Enrolled in Elective Courses

    Science.gov (United States)

    Zhumasheva, Anara; Zhumabaeva, Zaida; Sakenov, Janat; Vedilina, Yelena; Zhaxylykova, Nuriya; Sekenova, Balkumis

    2016-01-01

    The current study focuses on the research topic of creating a theoretical model of development of information competence among students enrolled in elective courses. In order to examine specific features of the theoretical model of development of information competence among students enrolled in elective courses, we performed an analysis of…

  10. PACE. A Program for Acquiring Competence in Entrepreneurship. Part III: Being an Entrepreneur. Unit A: Managing the Business. Research and Development Series No. 194 C-1.

    Science.gov (United States)

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This three-part curriculum for entrepreneurship education is primarily for postsecondary level, including four-year colleges and adult education, but it can be adapted for special groups or vocational teacher education. The emphasis of the eight instructional units in Part III is operating a business. Unit A focuses on the management process. It…

  11. The 1999 activities and the 1st seminar on human resources development in the nuclear field as part of Asian regional cooperation (contract research)

    International Nuclear Information System (INIS)

    2000-12-01

    In August, 1999, the Project for Human Resources Development (HRD) was initiated as defined in the framework of the Forum for Nuclear Cooperation in Asia, organized by the Atomic Energy Commission based on a resolution of the 10th International Conference for Nuclear Cooperation in Asia, held in March, 1999. The resolution was adopted as a recognition that 'human resources development' was an important area that should be added to the existing fields of cooperation. The Project was organized by the Atomic Energy Bureau of the Science and Technology Agency (STA) and is administrated by the Nuclear Technology and Education Center (NuTEC) of the Japan Atomic Energy Research Institute. The objective of the HRD Project is to solidify the foundation of technologies for nuclear development and utilization in Asia by promoting human resources development in Asian countries. In the Project there are two kind of activities: in-workshop activities and outside-of-workshop activities, as the time of the workshops themselves is too short to achieve the objectives. As In-workshop activities, 1st Seminar on Human Resources Development in the Nuclear Field was held on November 25 and 26, 1999, at the Tokyo International Forum. Participating countries were China, Indonesia, South Korea, Japan, Malaysia, the Philippines, Thailand, and Vietnam, with Australia submitting a study report only. This report consists of presentation papers at the Seminar as in-workshop activities, and a letter of proposal from the project leader of Japan to the project leaders of participating countries after the Seminar and a presentation paper on Human Resources Development at the First Coordinators Meeting on March 7 and 8, 2000 as outside-of-workshop activities. The 10 of the presented papers are indexed individually. (J.P.N.)

  12. The 1999 activities and the 1st seminar on human resources development in the nuclear field as part of Asian regional cooperation (contract research)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-12-01

    In August, 1999, the Project for Human Resources Development (HRD) was initiated as defined in the framework of the Forum for Nuclear Cooperation in Asia, organized by the Atomic Energy Commission based on a resolution of the 10th International Conference for Nuclear Cooperation in Asia, held in March, 1999. The resolution was adopted as a recognition that 'human resources development' was an important area that should be added to the existing fields of cooperation. The Project was organized by the Atomic Energy Bureau of the Science and Technology Agency (STA) and is administrated by the Nuclear Technology and Education Center (NuTEC) of the Japan Atomic Energy Research Institute. The objective of the HRD Project is to solidify the foundation of technologies for nuclear development and utilization in Asia by promoting human resources development in Asian countries. In the Project there are two kind of activities: in-workshop activities and outside-of-workshop activities, as the time of the workshops themselves is too short to achieve the objectives. As In-workshop activities, 1st Seminar on Human Resources Development in the Nuclear Field was held on November 25 and 26, 1999, at the Tokyo International Forum. Participating countries were China, Indonesia, South Korea, Japan, Malaysia, the Philippines, Thailand, and Vietnam, with Australia submitting a study report only. This report consists of presentation papers at the Seminar as in-workshop activities, and a letter of proposal from the project leader of Japan to the project leaders of participating countries after the Seminar and a presentation paper on Human Resources Development at the First Coordinators Meeting on March 7 and 8, 2000 as outside-of-workshop activities. The 10 of the presented papers are indexed individually. (J.P.N.)

  13. Theoretical analysis of nuclear reactors (Phase I), I-V, Part IV, Nuclear fuel depletion

    International Nuclear Information System (INIS)

    Pop-Jordanov, J.

    1962-07-01

    Nuclear fuel depletion is analyzed in order to estimate the qualitative and quantitative fuel property changes during irradiation and the influence of changes on the reactivity during long-term reactor operation. The changes of fuel properties are described by changes of neutron absorption and fission cross sections. Part one of this report covers the economic significance of fuel burnup and the review of fuel isotopic changes during depletion. Pat two contains the analysis of the U 235 chain, analytical expressions for the concentrations of U 235 , U 236 and Np 237 as a function of burnup. Part three contains the analysis of neutron spectrum influence on the Westcott method for calculating the cross sections. Part four contains the calculation method applied on Calder Hall type reactor. The results were obtained by applying ZUSE-22 R digital computer

  14. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 4, Part B: Chapter 8, Sections 8.0 through 8.3.1.4

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-01

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 74 figs., 32 tabs.

  15. A theoretical framework on CSR and urban development

    OpenAIRE

    Tsavdaridou, Maria; Metaxas, Theodore

    2015-01-01

    The role of enterprises in society is without doubt controversial nowadays due to the economic crisis. Although enterprises offer infrastructures, jobs, innovative solutions to local communities their primary goal is profit in order to be competitive and sustainable. This article examines the implementation of urban development projects under the CSR strategy and provides case studies of European enterprises that offered successful urban development projects in their local communities. There...

  16. Developing Surgical Antimicrobial Prophylaxis Interventions Using Theoretical Domains Framework

    OpenAIRE

    Bonnar, Paul E; Senthinathan, Arrani; Nakamachi, Yoshiko; Backstein, David J; Steinberg, Marilyn; Morris, Andrew M

    2017-01-01

    Abstract Background Surgical site infections are common causes of healthcare-associated infections. Using surgical antimicrobial prophylaxis (SAP) is a complex process that can reduce these rates if performed correctly. While antimicrobial stewardship programs have developed guidelines for SAP, there has been less focus on understanding and modifying the behavioral and contextual factors required to optimize prophylaxis use. We performed chart reviews and workflow analyses to develop interven...

  17. Internal combustion engine exhaust pipe flow simulation. Part I: theoretical aspects

    Directory of Open Access Journals (Sweden)

    Juan Miguel Mantilla

    2009-01-01

    Full Text Available Unsteady gas flow theory can be used for simulating a spark ignition internal combustion engine’s exhaust system, using pressure waves. The method explained here is based on the discretization of interpolated spaces (called meshes which are located throughout the whole length of the exhaust pipe, irrespective of its form or size. The most important aspects of this theory are theoretically explored, such as pressure wave movement and shock and their application to cases found in real engines’ exhaust pipes. This work also considers how the simulation must be made, based on the previous exploration. The results (presented as e- quations in this first paper show the great influence exerted by pressure wave movement on flow through the engine and there- fore on its final performance.

  18. Physics of badminton shuttlecocks. Part 1 : aerodynamics

    Science.gov (United States)

    Cohen, Caroline; Darbois Texier, Baptiste; Quéré, David; Clanet, Christophe

    2011-11-01

    We study experimentally shuttlecocks dynamics. In this part we show that shuttlecock trajectory is highly different from classical parabola. When one takes into account the aerodynamic drag, the flight of the shuttlecock quickly curves downwards and almost reaches a vertical asymptote. We solve the equation of motion with gravity and drag at high Reynolds number and find an analytical expression of the reach. At high velocity, this reach does not depend on velocity anymore. Even if you develop your muscles you will not manage to launch the shuttlecock very far because of the ``aerodynamic wall.'' As a consequence you can predict the length of the field. We then discuss the extend of the aerodynamic wall to other projectiles like sports balls and its importance.

  19. Bayesian inference for psychology. Part I : Theoretical advantages and practical ramifications

    NARCIS (Netherlands)

    Wagenmakers, E.-J.; Marsman, M.; Jamil, T.; Ly, A.; Verhagen, J.; Love, J.; Selker, R.; Gronau, Q.F.; Šmíra, M.; Epskamp, S.; Matzke, D.; Rouder, J.N.; Morey, R.D.

    2018-01-01

    Bayesian parameter estimation and Bayesian hypothesis testing present attractive alternatives to classical inference using confidence intervals and p values. In part I of this series we outline ten prominent advantages of the Bayesian approach. Many of these advantages translate to concrete

  20. Theoretical analysis of experimental results on SG-1 FEL

    International Nuclear Information System (INIS)

    Yang Zhenhua; Wu Shangqing; Tian Shihong; Dong Zhiwei; Wu Yupu

    1994-01-01

    In order to study the SG-1 FEL and the beam transport thoroughly, and draw certain quantitative conclusions, we developed 3-D WAGFEL code to describe the FEL evolution and 3-D CEBQ code to describe the beam transport. The CEBQ code can simulate the 3-D transport of the electron beam in the modulation section with linear approximation of space charge. According to the first ASE experiments results, the LIA provided a 2 kA, 3.0 MeV beam with a normalized emittance of 0.6 πrad·cm, an energy spread (FWHM) of 4%, resulting in a beam brightness nearly 10 8 A/(πm·rad) 2 . The numerical simulation showed that the quality of the beam was good enough to abandon the 9-m long beam line and substitute it with a 2-m long drifting and focusing region. The second series of ASE and amplifier experiments began in October 1992. The beam transport section was modified. The ASE output power, the amplifier output power and detuning curve was measured. We analysed the experimental results using the WAGFEL and CEBQ codes with parameters equal to those of experiments. Firstly we followed 4096 electrons to simulate the transport process of the beam in the beam line under the condition of I = 2 kA, r b = 1 cm, γ = 6.8, Δγ/γ 4%, ε rms = 0.6 (πrad·cm). Through the simulation, we predicted that the beam current injected into the wiggler was about 611 A. Based on these beam parameters at the entrance of the wiggler, we simulated the FEL process with P in = 300 W. The results are also in Fig.7,8,9

  1. What drives adult personality development? : A comparison of theoretical perspectives and empirical evidence

    NARCIS (Netherlands)

    Specht, J.; Bleidorn, W.; Denissen, J.J.A.; Hennecke, M.; Hutteman, R.; Luhmann, M.; Orth, U.; Reitz, A.K.; Zimmerman, J.

    2014-01-01

    Increasing numbers of empirical studies provide compelling evidence that personality traits change across the entire lifespan. What initiates this continuing personality development and how does this development proceed? In this paper, we compare six theoretical perspectives that offer testable

  2. THEORETIC AND METHODOLOGIC BASICS OF DEVELOPMENT OF THE NATIONAL LOGISTICS SYSTEM IN THE REPUBLIC OF BELARUS

    Directory of Open Access Journals (Sweden)

    R. B. Ivut

    2016-01-01

    Full Text Available The article presents the results of a study, the aim of which is the formation of the theoretical and methodological foundations in the framework of scientific maintenance for the further development processes of the national logistics system in the Republic of Belarus. The relevance of the study relates to the fact that at present the introduction of the concept of logistics and the formation of the optimal infrastructure for its implementation are the key factors for economic development of Belarus as a transit country. At the same time the pace of development of the logistic activities in the country is currently slightly lower in comparison with the neighboring countries, as evidenced by the dynamics of the country’s position in international rankings (in particular, according to the LPI index. Overcoming these gaps requires improved competitiveness of the logistics infrastructure in the international market. This, in turn, is possible due to the clear formulation and adherence of the effective functioning principles for macro logistics system of Belarus, as well as by increasing the quality of logistics design by means of applying econometric models and methods presented in the article. The proposed auctorial approach is the differentiation of the general principles of logistics specific to the logistics systems of all levels, and the specific principles of development of the macro level logistics system related to improving its transit attractiveness for international freight carriers. The study also systematizes the model for determining the optimal location of logistics facilities. Particular attention is paid to the methodological basis of the analysis of transport terminals functioning as part of the logistics centers both in the stages of design and operation. The developed theoretical and methodological recommendations are universal and can be used in the design of the logistics infrastructure for various purposes and functions

  3. The metallurgy of superalloys part 1

    International Nuclear Information System (INIS)

    Abdelazim, M.E.; Hammad, F.H.

    1990-01-01

    This is part I of the report titled 'the metallurgy of superalloys'. In this part the structure, phases and systems of superalloys are reviewed. The role of alloying elements in the design of superalloys and the mechanical properties of superalloys are also reviewed. Superalloys are important in high temperature technology, especially above 700 degree c. They are 'super' mainly because their creep and stress rupture resistances are very high. Superalloys are based on an austenitic matrix including secondary phases, mainly gamma precipitates, inter and intragranular carbides mainly M 23 C 6 and M 6 C. They are classified into three systems, Ni-base, Fe-Ni base and Ce-base alloys. Different alloying elements mainly Cr, Mo, Al, Ti are added to increase the strength either by solid solution hardening (Cr, Mo, Al), precipitation hardening (A 1, Ti to produce gamma) or by dispersion hardening (Cr, Mo to form M 23 C 6 and M 6 C carbides) and to increase the oxidation resistance (Cr, Al). 3 tab., 2 fig

  4. Practernship: A Theoretical Construct for Developing Professionalism in Preservice Teachers.

    Science.gov (United States)

    Millwater, Jan; Yarrow, Allan

    1997-01-01

    Professors from Australia's Queensland University introduce the concept of a "practernship" that is a variation of typical internship/apprenticeship programs for preservice teachers. The "practernship" combines practice teaching and internship, encourages collaboration and professional development, and promotes a holistic,…

  5. Social security in developing countries : some theoretical considerations

    NARCIS (Netherlands)

    Leliveld, A.H.M.

    1991-01-01

    This paper discusses the concept of social security and criticizes the ILO definition of the concept as too limited to analyse non-Western social security systems. It develops an alternative definition which includes, firstly, the protection by society of individuals or social groups against a fall

  6. Towards a Theory of University Entrepreneurship: Developing a Theoretical Model

    Science.gov (United States)

    Woollard, David

    2010-01-01

    This paper sets out to develop a robust theory in a largely atheoretical field of study. The increasing importance of entrepreneurship in delivering the "Third Mission" calls for an enhanced understanding of the university entrepreneurship phenomenon, not solely as a subject of academic interest but also to guide the work of practitioners in the…

  7. Theoretical models in the development of advertising for food products

    DEFF Research Database (Denmark)

    Bech-Larsen, Tino; Stacey, Julia

    2005-01-01

    the advertisement influences the target may serve as creative inspiration and as a common frame of reference for those involved in the development of advertisements. The means-end-chain model says that an advertisement is effective by connecting the product's attributes (means) and the target's personal values...

  8. Theoretical Framework of Researcher Knowledge Development in Mathematics Education

    Science.gov (United States)

    Kontorovich, Igor'

    2016-01-01

    The goal of this paper is to present a framework of researcher knowledge development in conducting a study in mathematics education. The key components of the framework are: knowledge germane to conducting a particular study, processes of knowledge accumulation, and catalyzing filters that influence a researcher's decision making. The components…

  9. Task Analysis in Instructional Program Development. Theoretical Paper No. 52.

    Science.gov (United States)

    Bernard, Michael E.

    A review of task analysis procedures beginning with the military training and systems development approach and covering the more recent work of Gagne, Klausmeier, Merrill, Resnick, and others is presented along with a plan for effective instruction based on the review of task analysis. Literature dealing with the use of task analysis in programmed…

  10. Theoretical modeling and design of photonic structures in zeolite nanocomposites for gas sensing. Part I: surface relief gratings.

    Science.gov (United States)

    Cody, D; Naydenova, I

    2017-12-01

    The suitability of holographic structures fabricated in zeolite nanoparticle-polymer composite materials for gas sensing applications has been investigated. Theoretical modeling of the sensor response (i.e., change in hologram readout due to a change in refractive index modulation or thickness as a result of gas adsorption) of different sensor designs was carried out using Raman-Nath theory and Kogelnik's coupled wave theory. The influence of a range of parameters on the sensor response of holographically recorded surface and volume photonic grating structures has been studied, namely the phase difference between the diffracted and probe beam introduced by the grating, grating geometry, thickness, spatial frequency, reconstruction wavelength, and zeolite nanoparticle refractive index. From this, the optimum fabrication conditions for both surface and volume holographic gas sensor designs have been identified. Here, in part I, results from theoretical modeling of the influence of design on the sensor response of holographically inscribed surface relief structures for gas sensing applications is reported.

  11. Synthesis, experimental and theoretical vibrational studies of 1 ...

    Indian Academy of Sciences (India)

    M Drai

    FT-Raman spectra [45–4000 cm. −1. ] were collected ... 788. Figure 1. FTIR/ATR spectra of [1-MPrIM. +][(CF3SO2)2N. −] and. [1, 2-DMPrIM. +][(CF3SO2)2N ...... Lane G H 2012 Electrochemical reduction mechanisms and stabilities of some ...

  12. THEORETICAL FOUNDATIONS OF THE ENVIRONMENTAL EDUCATION AS PART OF THE ENVIRONMENTAL CULTURE / FUNDAMENTOS TEÓRICOS DE LA EDUCACIÓN AMBIENTAL COMO PARTE DE LA CULTURA AMBIENTAL

    Directory of Open Access Journals (Sweden)

    Omar García Vázquez

    2013-09-01

    Full Text Available The present article is the result of the experience and the scientific and researching work carried out by the staff of authors as a part of the project “Impact of the Pedagogical Universalization in Pilon Municipality”. Its aim is to contribute to the methodological and scientific preparation of educators, students and other professional people, from a review of the environmental education as a platform of the environmental culture. To make possible the shaping of an appropriate theoretical device that gets to the point of these elements it is necessary to analyze some of its foundations.

  13. Development and intra-institutional and inter-institutional validation of a comprehensive new hepatobiliary software: Part 1--Liver and gallbladder function.

    Science.gov (United States)

    Krishnamurthy, Gerbail T; Krishnamurthy, Shakuntala; Gambhir, Sanjiv Sam; Rodrigues, Cesar; Rosenberg, Jarrett; Schiepers, Christiaan; Buxton-Thomas, Muriel

    2009-12-01

    To develop a software tool for quantification of liver and gallbladder function, and to assess the repeatability and reproducibility of measurements made with it. The software tool developed with the JAVA programming language uses the JAVA2 Standard Edition framework. After manual selection of the regions of interest on a 99mTc hepatic iminodiacetic acid study, the program calculates differential hepatic bile flow, basal duodeno-gastric bile reflux (B-DGBR), hepatic extraction fraction (HEF) of both the lobes with deconvolutional analysis and excretion half-time with nonlinear least squares fit. Gallbladder ejection fraction, ejection period (EP), ejection rate (ER), and postcholecystokinin (CCK) DGBR are calculated after stimulation with CCK-8. To assess intra-observer repeatability and intra-observer reproducibility, measurements from 10 normal participants were analyzed twice by three nuclear medicine technologists at the primary center. To assess inter-site reproducibility, measurements from a superset of 24 normal participants were also assessed once by three observers at the primary center and single observer at three other sites. For the 24 control participants, mean+/-SD of hepatic bile flow into gallbladder was 63.87+/-28.7%, HEF of the right lobe 100+/-0%, left lobe 99.43+2.63%, excretion half-time of the right lobe 21.50+6.98 min, left lobe 28.3+/-11.3 min. Basal DGBR was 1.2+/-1.0%. Gallbladder ejection fraction was 80+/-11%, EP 15.0+/-3.0 min, ER 5.8+/-1.6%/min, and DGBR-CCK 1.3+/-2.3%. Left and right lobe HEF was virtually identical across readers. All measures showed high repeatability except for gallbladder bile flow, basal DGBR, and EP, which exhibited marginal repeatability. Ejection fraction exhibited high reproducibility. There was high concordance among the three primary center observers except for basal DGBR, EP, and ER. Concordance between the primary site and one of the other sites was high, one was fair, and one was poor. New United States

  14. Handbook of Time Series Analysis Recent Theoretical Developments and Applications

    CERN Document Server

    Schelter, Björn; Timmer, Jens

    2006-01-01

    This handbook provides an up-to-date survey of current research topics and applications of time series analysis methods written by leading experts in their fields. It covers recent developments in univariate as well as bivariate and multivariate time series analysis techniques ranging from physics' to life sciences' applications. Each chapter comprises both methodological aspects and applications to real world complex systems, such as the human brain or Earth's climate. Covering an exceptionally broad spectrum of topics, beginners, experts and practitioners who seek to understand the latest de

  15. Dynamical Systems Method and Applications Theoretical Developments and Numerical Examples

    CERN Document Server

    Ramm, Alexander G

    2012-01-01

    Demonstrates the application of DSM to solve a broad range of operator equations The dynamical systems method (DSM) is a powerful computational method for solving operator equations. With this book as their guide, readers will master the application of DSM to solve a variety of linear and nonlinear problems as well as ill-posed and well-posed problems. The authors offer a clear, step-by-step, systematic development of DSM that enables readers to grasp the method's underlying logic and its numerous applications. Dynamical Systems Method and Applications begins with a general introduction and

  16. Simulation of ultra-long term behavior in HLW near-field by centrifugal model test. Part 1. Development of centrifugal equipment and centrifuge model test method

    International Nuclear Information System (INIS)

    Nishimoto, Soshi; Okada, Tetsuji; Sawada, Masataka

    2011-01-01

    The objective of this paper is to develop a centrifugal equipment which can continuously be run for a long time and a model test method in order to evaluate a long term behavior which is a coupled thermo-hydro-mechanical processes in the high level wastes geological disposal repository and the neighborhood (called 'near-field'). The centrifugal equipment of CRIEPI, 'CENTURY5000-THM', developed in the present study is able to run continuously up to six months. Therefore, a long term behavior in the near-field can be simulated in a short term, for instance, the behavior for 5000 equivalent years can be simulated in six months by centrifugalizing 100 G using a 1/100 size model. We carried out a test using a nylon specimen in a centrifugal force field of 30 G and confirmed the operations of CENTURY5000-THM, control and measurement for 11 days. As the results, it was able to control the stress in the pressure vessel and measure the values of strain, temperature and pressure. And, as a result of scanning the small model of near-field including the metal overpack, bentonite buffer and rock by a medical X-rays CT scanner, the internal structure of the model was able to be evaluated when the metal artifact was reduced. From these results, the evaluation for a long term behavior of a disposal repository by the method of centrifugal model test became possible. (author)

  17. Urban Agglomerations in Regional Development: Theoretical, Methodological and Applied Aspects

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Shmidt

    2016-09-01

    Full Text Available The article focuses on the analysis of the major process of modern socio-economic development, such as the functioning of urban agglomerations. A short background of the economic literature on this phenomenon is given. There are the traditional (the concentration of urban types of activities, the grouping of urban settlements by the intensive production and labour communications and modern (cluster theories, theories of network society conceptions. Two methodological principles of studying the agglomeration are emphasized: the principle of the unity of the spatial concentration of economic activity and the principle of compact living of the population. The positive and negative effects of agglomeration in the economic and social spheres are studied. Therefore, it is concluded that the agglomeration is helpful in the case when it brings the agglomerative economy (the positive benefits from it exceed the additional costs. A methodology for examination the urban agglomeration and its role in the regional development is offered. The approbation of this methodology on the example of Chelyabinsk and Chelyabinsk region has allowed to carry out the comparative analysis of the regional centre and the whole region by the main socio-economic indexes under static and dynamic conditions, to draw the conclusions on a position of the city and the region based on such socio-economic indexes as an average monthly nominal accrued wage, the cost of fixed assets, the investments into fixed capital, new housing supply, a retail turnover, the volume of self-produced shipped goods, the works and services performed in the region. In the study, the analysis of a launching site of the Chelyabinsk agglomeration is carried out. It has revealed the following main characteristics of the core of the agglomeration in Chelyabinsk (structure feature, population, level of centralization of the core as well as the Chelyabinsk agglomeration in general (coefficient of agglomeration

  18. Petri nets - part 1: concepts and application areas

    International Nuclear Information System (INIS)

    Sivertsen, Terje

    2004-03-01

    There exist a number of models, languages, methods, and tools that support the specification and analysis of system requirements. One important class comprises graphical methods based on the concept of Petri nets. Due to the wide variety of applications, these methods are relevant also in research and applications outside the digital systems safety domain. The present report constitutes the first of three parts of a unified exposition of graphical methods based on the concept of Petri nets. The report provides an introduction to basic concepts of Petri nets and an overview of a wide variety of application areas. The second part of the trilogy will present a number of techniques and tools. The third part will focus on analysis. Petri nets have been proposed for a wide variety of applications, and new areas are considered as new challenges emerge from scientific, technological, and social developments. The wide variety of application areas reflects a broad interest in Petri nets, coming from diverse directions. Empirically, as well as theoretically, there are good reasons to claim that Petri nets are applicable for many different kinds of problems. What is common to the different applications and problems addressed is the need for a formalism that allows adequate representation of important system characteristics like concurrency, asyncronicity, distribution, parallelism, and non-determinism. Several of the references in the report discuss NPP-related applications, or applications with great potentials for technology transfer from other areas to the nuclear domain. (Author)

  19. The historical development of the fashion system: a theoretical review

    Directory of Open Access Journals (Sweden)

    Antonio Martín-Cabello

    2016-03-01

    Full Text Available In this essay I show the main models used to explain the fashion system. I try to describe how these models have always show fashion as a relationship between the fashion system and the general population. To do this, firstly I make a historical tour around the most significant developments of fashion. And secondly I collect the scientific theories that have tried to explain this phenomenon. I conclude that there are three basic theories today which try to explain this relationship: the trickle-down model, the model of subcultural resistance and the virulence or contagion model. All of them are insufficient because they are not made explicit and they present serious analytical shortcomings.

  20. Development of energy-efficient comfortable ventilation systems with air quality guided volume flow control and continuous monitoring of the window opening status. Part 2. Theoretical investigations of the pressure difference method. Research project; Entwicklung energieeffizienter Komfortlueftungsanlagen mit luftqualitaetsgefuehrter Volumenstromregelung und kontinuierlicher Erfassung des Fensteroeffnungszustandes. Teilbericht 2. Theoretische Untersuchungen zur Druckdifferenz-Methode. Forschungsprojekt

    Energy Technology Data Exchange (ETDEWEB)

    Knissel, Jens; Grossklos, Marc [Institut Wohnen und Umwelt GmbH, Darmstadt (Germany); Werner, Johannes [Ingenieurbuero fuer Energieberatung, Haustechnik und Oekologische Konzepte GbR (eboek), Tuebingen (Germany)

    2011-05-15

    In energy-efficient buildings with mechanical ventilation and heat recovery, the heat losses of ventilation of a building can be influenced by additional open windows. This causes a significant rise in the heating demand. The Drd method (pressure difference method) assumes that the negative pressure in a building after switching off the supply air fan will depend on whether all windows are closed, or at least one window is open. In the research project under consideration the determination of the position of the window aperture using the Drd method shall be developed further. The operating conditions of the Drd method is investigated theoretically. Questions of the required building tightness and plant characteristics are clarified.

  1. 1,2-Propanediol. Comprehensive experimental and theoretical study

    International Nuclear Information System (INIS)

    Verevkin, Sergey P.; Emel'yanenko, Vladimir N.; Nell, Gernot

    2009-01-01

    The standard (p 0 =0.1MPa) molar enthalpy of formation at the temperature 298.15 K of the liquid 1,2-propanediol was measured using combustion calorimetry. Molar enthalpies of vaporization of isomeric 1,2-propanediols were obtained from the temperature dependence of the vapor pressure measured by the transpiration method. Thermochemical investigations of 1,2-ethanediol and 1,2-propanediol available in the literature were collected and combined with own experimental results. This collection together with the new experimental results reported here has helped to resolve contradictions in the available sublimation enthalpies data and to recommend consistent and reliable set of vaporization and formation enthalpies for both diols under study. Ab initio calculations of gaseous molar enthalpy of formation of 1,2-ethanediol and 1,2-propanediol have been performed using the G3MP2 method and results are in excellent agreement with the selected experimental data.

  2. Sustainability Definitions for NRAs – Framework Part 1

    DEFF Research Database (Denmark)

    Gudmundsson, Henrik; Harmer, Clare; Hewitt, Alison

    Part 1 “Sustainability Definitions for NRAs”. The objective of this part of the framework is to support NRAs in developing and implementing definitions of sustainability. The present report contains the foundations for the framework, including: •The methodology adopted in the process of developing...... the understanding of the social, environmental and economic aspects of managing a road network. Whilst NRAs generally share an increasing awareness of some aspects of sustainability there is not a common understanding of, or approach to sustainability, as a whole. The project ‘Sustainability for National Road...... Authorities’ (SUNRA) is tasked with identifying how NRAs can contribute to sustainable development. This involves three main tasks, addressed in three corresponding Work Packages (WPs) 1.Providing a common way of defining sustainable development within the context of European NRAs (WP1). 2.Identifying how...

  3. Formation and development of theoretical principles for mineral resources logistics

    Directory of Open Access Journals (Sweden)

    Б. К. Плоткин

    2017-03-01

    Full Text Available Market transformations in Russia became foundations for formation and development of a new scientific and practical field in economics – logistics. Out of more than 30 existing definitions of logistics the authors according to their opinion have chosen the most appropriate. Logistics of mineral resources should be attributed to production (industrial logistics. It is a proven fact that processes of supply chain management in mining industry and its infrastructure in the framework of mineral resources chain have some fundamental distinctions. Importance of material resources recycling in theory and practice of mineral resources logistics has been highlighted. Special features of merchandise assortment and classifications in the mining industry have been examined in conjunction with substantial contents of material flow. Special consideration has been given to relevant issues in the field of price formation for mining produce, in the view of specific relations between its costs and logistic procurement of the industry. Moreover, questions of inventory control in the mining industry, activity of commodity exchanges, management of mining logistics system have been addressed.

  4. Description of group-theoretical model of developed turbulence

    International Nuclear Information System (INIS)

    Saveliev, V L; Gorokhovski, M A

    2008-01-01

    We propose to associate the phenomenon of stationary turbulence with the special self-similar solutions of the Euler equations. These solutions represent the linear superposition of eigenfields of spatial symmetry subgroup generators and imply their dependence on time through the parameter of the symmetry transformation only. From this model, it follows that for developed turbulent process, changing the scale of averaging (filtering) of the velocity field is equivalent to composition of scaling, translation and rotation transformations. We call this property a renormalization-group invariance of filtered turbulent fields. The renormalization group invariance provides an opportunity to transform the averaged Navier-Stokes equation over a small scale (inner threshold of the turbulence) to larger scales by simple scaling. From the methodological point of view, it is significant to note that the turbulent viscosity term appeared not as a result of averaging of the nonlinear term in the Navier-Stokes equation, but from the molecular viscosity term with the help of renormalization group transformation.

  5. Multibarrier waste forms. Part I. Development

    International Nuclear Information System (INIS)

    Rusin, J.M.; Lokken, R.O.; Lukacs, J.M.; Sump, K.R.; Browning, M.F.; McCarthy, G.J.

    1978-09-01

    The multibarrier concept produces a composite waste form with enhanced inertness through improvements in thermal stability, mechanical strength, and leachability by the use of coatings and metal matrices. This report describes research and development activities resulting in the demonstration of the multibarrier concept for nonradioactive simulated waste compositions. The multibarrier concept is to utilize up to three barriers to isolate radionuclides from the environment: a solid waste inner core, an impervious coating, and a metal matrix. Two inner core materials, sintered supercalcine and glass marbles, have been demonstrated. The coating barrier provides enhanced leach, impact, and oxidation resistance as well as thermal protection during encapsulation in the metal matrix. Py/Al 2 O 3 coatings deposited by chemical vapor deposition (CVD) and glass coatings have been applied to supercalcine cores to improve inertness. The purpose of the metal matrix is to improve impact resistance, protect the inner core rom any adverse environments, provide radiation shielding, and increase thermal conductivity, yielding lower internal temperatures. The development of gravity sintering and vacuum casting techniques for matrix encapsulation are discussed. Four multibarrier products were demonstrated: (1) Glass marbles encapsulated in vacuum-cast Pb-10Sn; (2) uncoated, sintered supercalcine pellets encapsulated in vacuum-cast Al-12Si; (3) glass-coated, sintered supercalcine pellets encapsulated in vacuum-cast Al-12Si; and (4) PyC/Al 2 O 3 -coated supercalcine encapsulated in gravity-sintered Cu. 23 figs., 20 tables

  6. Navigating the grounded theory terrain. Part 1.

    Science.gov (United States)

    Hunter, Andrew; Murphy, Kathy; Grealish, Annmarie; Casey, Dympna; Keady, John

    2011-01-01

    The decision to use grounded theory is not an easy one and this article aims to illustrate and explore the methodological complexity and decision-making process. It explores the decision making of one researcher in the first two years of a grounded theory PhD study looking at the psychosocial training needs of nurses and healthcare assistants working with people with dementia in residential care. It aims to map out three different approaches to grounded theory: classic, Straussian and constructivist. In nursing research, grounded theory is often referred to but it is not always well understood. This confusion is due in part to the history of grounded theory methodology, which is one of development and divergent approaches. Common elements across grounded theory approaches are briefly outlined, along with the key differences of the divergent approaches. Methodological literature pertaining to the three chosen grounded theory approaches is considered and presented to illustrate the options and support the choice made. The process of deciding on classical grounded theory as the version best suited to this research is presented. The methodological and personal factors that directed the decision are outlined. The relative strengths of Straussian and constructivist grounded theories are reviewed. All three grounded theory approaches considered offer the researcher a structured, rigorous methodology, but researchers need to understand their choices and make those choices based on a range of methodological and personal factors. In the second article, the final methodological decision will be outlined and its research application described.

  7. Creep investigation of GFRP RC Beams - Part B: a theoretical framework

    Directory of Open Access Journals (Sweden)

    masmoudi abdelmonem

    2014-11-01

    Full Text Available This paper presents an analytical study about the viscoelastic time-dependent (creep behavior of pultruded GFRP elements made of polyester and E-glass fibres. Experimental results reported in Part A are firstly used for material characterization by means of empirical and phenomenological formulations.   The superposition principles by adopting the law of creep following the Eurocode 2 recommendations are also investigated. Analytical study was also conducted including creep under constant stress; successions of increasing stress superposition principle equivalent time and the return creep reloading. The results of this study revealed that Beams reinforced with GFRP are less marked with creep phenomenon.  This investigation should guide the civil engineer/designer for a better understanding creep phenomenon in GFRP reinforced concrete members.

  8. Linking agriculture and environment: theoretical framework and experiences from developed and developing countries

    International Nuclear Information System (INIS)

    Siwar, C.; Hossain, E.

    2005-01-01

    Despite significantly contributing to country's overall economic development through providing employment for the people and supplying raw materials for agro- and resource based industrial development, agriculture is putting serious burden on the environment in the process of production and consumption of agricultural produce. It is the largest consumer and polluter of water resources and contributor of atmospheric pollution, land degradation and forest reduction. Agriculture-environmental relationship is complex and the relationship depends on the spatial and biophysical factors and country's level of economic development. This paper tried to document the linkages between agricultural practices and policies with environment. The channels, through which agriculture impacts the environment, is discussed. It is seen that multilateral trade liberalization in agriculture interacts with the domestic agricultural policy reforms to determine the environmental impacts of agriculture. It is seen that agricultural policy reforms and agricultural trade liberalization can have separate environmental effects in the developed and developing countries. A wide range of theoretical and empirical literatures are reviewed, in this paper, to understand the concepts, linkages and environmental problems. Finally, this paper ends up with the conclusion that integrating environmental considerations into domestic agricultural policies and implementing agro-environmental programmes may ensure the decline of environmental problems of agriculture in both the developed and developing countries. (author)

  9. The Algorithm Theoretical Basis Document for Level 1A Processing

    Science.gov (United States)

    Jester, Peggy L.; Hancock, David W., III

    2012-01-01

    The first process of the Geoscience Laser Altimeter System (GLAS) Science Algorithm Software converts the Level 0 data into the Level 1A Data Products. The Level 1A Data Products are the time ordered instrument data converted from counts to engineering units. This document defines the equations that convert the raw instrument data into engineering units. Required scale factors, bias values, and coefficients are defined in this document. Additionally, required quality assurance and browse products are defined in this document.

  10. Morphological Evolution of the Turtle Shell and its Mechanical Implications, Part 2: Theoretical

    OpenAIRE

    McLaughlin, Connor

    2016-01-01

    Evolutionary biologists have considered understanding the relationship between organismal morphology and functional performance to be fundamental for understanding phenotypic diversification. Numerous studies have investigated performance and morphological evolution within lineages. However, far less attention has been paid to the relationship between performance and morphological diversification among lineages. This study develops the turtle shell as a model system for studying morphological...

  11. Acceptability of healthcare interventions: an overview of reviews and development of a theoretical framework.

    Science.gov (United States)

    Sekhon, Mandeep; Cartwright, Martin; Francis, Jill J

    2017-01-26

    It is increasingly acknowledged that 'acceptability' should be considered when designing, evaluating and implementing healthcare interventions. However, the published literature offers little guidance on how to define or assess acceptability. The purpose of this study was to develop a multi-construct theoretical framework of acceptability of healthcare interventions that can be applied to assess prospective (i.e. anticipated) and retrospective (i.e. experienced) acceptability from the perspective of intervention delivers and recipients. Two methods were used to select the component constructs of acceptability. 1) An overview of reviews was conducted to identify systematic reviews that claim to define, theorise or measure acceptability of healthcare interventions. 2) Principles of inductive and deductive reasoning were applied to theorise the concept of acceptability and develop a theoretical framework. Steps included (1) defining acceptability; (2) describing its properties and scope and (3) identifying component constructs and empirical indicators. From the 43 reviews included in the overview, none explicitly theorised or defined acceptability. Measures used to assess acceptability focused on behaviour (e.g. dropout rates) (23 reviews), affect (i.e. feelings) (5 reviews), cognition (i.e. perceptions) (7 reviews) or a combination of these (8 reviews). From the methods described above we propose a definition: Acceptability is a multi-faceted construct that reflects the extent to which people delivering or receiving a healthcare intervention consider it to be appropriate, based on anticipated or experienced cognitive and emotional responses to the intervention. The theoretical framework of acceptability (TFA) consists of seven component constructs: affective attitude, burden, perceived effectiveness, ethicality, intervention coherence, opportunity costs, and self-efficacy. Despite frequent claims that healthcare interventions have assessed acceptability, it is

  12. Research and development of the industrial basic techniques of the next generation. Composite materials (Final research and development evaluation / Part 1); Jisedai dangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (Saishu kenkyu kaihatsu hyoka 1)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-05-01

    This R and D project is aimed at development of highly functional materials for aerospace devices, bringing into focus research and development of resin-based composite materials (FRPs), metal-based composite materials (FRMs), and evaluation of their properties and their design techniques. The basic target properties are heat resistance temperature of 250 degrees C or higher and tensile strength of 240 kg/mm{sup 2} or more for the FRPs, and heat resistance temperature of 450 degrees C or higher and tensile strength of 150 kgf/mm{sup 2} or more for the FRMs. This R and D program has been implemented for 8 years for development of raw materials, molding/processing techniques, quality evaluation and designs through information exchange and discussions of the experts in each area under integrated, close cooperation from raw materials to molding/processing. Most of the data indicate that the target properties and objects are satisfied or exceeded. It is therefore concluded that this project for the composite materials, extending for 8 years in 3 phases, has sufficiently achieved the initial objects. The unique techniques are incorporated in the raw materials, molding/processing processes, quality evaluation and designs. These efforts have produced the FRPs and FRMs of the world highest qualities. (NEDO)

  13. Developing and Testing a Theoretical Framework for Computer-Mediated Transparency of Local Governments

    NARCIS (Netherlands)

    Grimmelikhuijsen, S.G.; Welch, E.W.

    2012-01-01

    This article contributes to the emerging literature on transparency by developing and empirically testing a theoretical framework that explains the determinants of local government Web site transparency. It aims to answer the following central question: What institutional factors determine the

  14. Integrated smart bearings for next generation aero-engines Part 1: Development of a sensor suite for automatic bearing health monitoring

    OpenAIRE

    Bashir, Imran; Wang, Ling; Harvey, Terence; Zaghari, Bahareh; Weddell, Alexander; White, Neil

    2017-01-01

    The development of smart bearing solutions will contribute to increased aircraft engine reliability, allowing the early detection of bearing failure through robust health monitoring. This project aims to develop intelligent bearing systems for an Ultra High Propulsion Efficiency (UHPE) ground test demonstrator, where a fully integrated self-powered wireless sensing system will be developed for future aircraft. This paper provides a comprehensive review of the state-of-the-art smart bearing te...

  15. Release of Inorganic Elements during Wood Combustion. Release to the Gas Phase of Inorganic Elements during: Wood Combustion. Part 1: Development and Evaluation of Quantification Methods

    DEFF Research Database (Denmark)

    van Lith, Simone Cornelia; Alonso-Ramírez, Violeta; Jensen, Peter Arendt

    2006-01-01

    During wood combustion, inorganic elements such as alkali metals, sulfur, chlorine, and some heavy metals are partly released to the gas phase, which may cause problems in combustion facilities because of deposit formation and corrosion. Furthermore, it may cause harmful emissions of gases......) in this reactor, whereas methods B and C involved initial pyrolysis and combustion, respectively, of a large fuel sample (~5 kg) in a bench-scale fixed-bed reactor at 500 C. The methods were evaluated by comparing the data on the release of Cl, S, K, Na, Zn, and Pb from fiber board obtained by the three methods...

  16. Theoretical analysis of nuclear reactors (Phase I), I-V, Part III, Reactor poisoning

    International Nuclear Information System (INIS)

    Pop-Jordanov, J.

    1962-07-01

    Method was developed for calculation of Xe 135 static effect and kinetic effects of Xe 135 and Sm 149 with separate treatment of iodine effect and influence of reactor poisoning during power increase. Mentioned effects are treated first for uranium fuel and then the basic formulae were generalized for a mixture of fissile material. The annex contains a table with data needed for calculations and the Xe 13 5 microscopic capture cross section dependent on temperature [sr

  17. Developing a Philippine Cancer Grid. Part 1: Building a Prototype for a Data Retrieval System for Breast Cancer Research Using Medical Ontologies

    Science.gov (United States)

    Coronel, Andrei D.; Saldana, Rafael P.

    Cancer is a leading cause of morbidity and mortality in the Philippines. Developed within the context of a Philippine Cancer Grid, the present study used web development technologies such as PHP, MySQL, and Apache server to build a prototype data retrieval system for breast cancer research that incorporates medical ontologies from the Unified Medical Language System (UMLS).

  18. FY 1986 Report on research and development of super heat pump energy accumulation system. Part 1. Development of elementary techniques; 1986 nendo super heat pump energy shuseki system no kenkyu kaihatsu seika hokokusho. 1. Yoso gijutsu no kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1987-04-01

    Summarized in detail herein are R and D results of the super high performance heat pumps and elementary equipment and working fluids, for R and D of the super heat pump energy accumulation system. For R and D of the super high performance compression heat pumps, the R and D efforts are directed to development of new working fluids, high-performance heat exchangers, closed motors and so on for the highly efficient type (for heating only); to researches on mixed coolants, high-efficiency screw compressors and so on for the highly efficient type (for cooling and heating); to development of tooth shape of the screw compression section, surveys on thermal stability of the working fluids for heating and so on for the high temperature type (utilizing low temperature heat source); and to R and D of the high-speed reciprocating compressors and steam superchargers for the high temperature type (utilizing high temperature heat source). For R and D of the elementary equipment and working fluids, researches are conducted on evaporators for mixed working fluids, condensers utilizing the EHD effect, stainless steel plate fin type heat exchangers, heat exchangers for the chemical heat accumulation unit, and so on. The R and D efforts are also directed to the working fluids (alcohol-based and nonalcohol-based). (NEDO)

  19. Nanopharmaceuticals (part 1: products on the market

    Directory of Open Access Journals (Sweden)

    Weissig V

    2014-09-01

    Full Text Available Volkmar Weissig,1 Tracy K Pettinger,2 Nicole Murdock3 1Department of Pharmaceutical Sciences, Midwestern University College of Pharmacy Glendale, Glendale, AZ, USA; 2Department of Pharmacy Practice and Administrative Sciences, College of Pharmacy, Idaho State University, Pocatello, ID, USA; 3Department of Pharmacy Practice, Midwestern University College of Pharmacy Glendale, Glendale, AZ, USA Abstract: In 2000, the National Institute of Health launched the National Nanotechnology Initiative to support, coordinate, and advance research and development of nanoscale projects. The impact of this new program on health-science related research and development became quickly visible. Broad governmental financial support advanced the start of new, and the deepening of already existing, interdisciplinary research. The anticipated merger of nanoscience with medicine quickly instigated the conceptualization of nanomedicine. The adoption of nanoscience terminology by pharmaceutical scientists resulted in the advent of nanopharmaceuticals. The term “nano” became tantamount to “cutting-edge” and was quickly embraced by the pharmaceutical science community. Colloidal drug delivery systems reemerged as nanodrug delivery systems; colloidal gold became a suspension of nano gold particles. In this review, we first review nanoscience related definitions applied to pharmaceuticals, we then discuss all 43 currently approved drug formulations which are publicized as nanopharmaceuticals, and finally we analyze clinical aspects of selected drug formulations. Keywords: amphotericin-B, fenofibrate, nanodrugs, nanomedicine, nanoparticle, drug delivery

  20. Goal setting and action planning in the rehabilitation setting: development of a theoretically informed practice framework.

    Science.gov (United States)

    Scobbie, Lesley; Dixon, Diane; Wyke, Sally

    2011-05-01

    Setting and achieving goals is fundamental to rehabilitation practice but has been criticized for being a-theoretical and the key components of replicable goal-setting interventions are not well established. To describe the development of a theory-based goal setting practice framework for use in rehabilitation settings and to detail its component parts. Causal modelling was used to map theories of behaviour change onto the process of setting and achieving rehabilitation goals, and to suggest the mechanisms through which patient outcomes are likely to be affected. A multidisciplinary task group developed the causal model into a practice framework for use in rehabilitation settings through iterative discussion and implementation with six patients. Four components of a goal-setting and action-planning practice framework were identified: (i) goal negotiation, (ii) goal identification, (iii) planning, and (iv) appraisal and feedback. The variables hypothesized to effect change in patient outcomes were self-efficacy and action plan attainment. A theory-based goal setting practice framework for use in rehabilitation settings is described. The framework requires further development and systematic evaluation in a range of rehabilitation settings.

  1. Theoretical provisions for the discharge at TJ-1 (Preliminary study)

    International Nuclear Information System (INIS)

    Guasp, J.

    1981-01-01

    Using the transport code PLASMATOR a numerical study about the TJ-1 discharge (a Tokamak close to be installed at JEN) has been made, observing the behaviour under huge variations on the transport coefficients as well as on density and current. Noteworthy a scaling law of the kind τ E ∼n θ has been contested at not too high density, The model insensibility upon the initial values has been confirmed and the effects of variations on the recycling coefficient and the rate rise of current studied too. Finally comparisons with alternative models have been accomplished. (Author) 29 refs

  2. NF EN ISO 11137-1, July 2006. Sterilization of health care products - Irradiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2006-01-01

    This part of the ISO 11137 standard specifies requirements for the development, validation and routine control of a radiation sterilization process for medical devices. Although the scope of this part of the ISO 11137 standard is limited to medical devices, it specifies requirements and provides guidance that may be applicable to other products and equipment. This part of the international standard covers radiation processes employing irradiators using the radionuclide 60 Co or 137 Cs, a beam from an electron generator or a beam from an X-ray generator. This part of the international standard does not: - specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease; - detail specified requirements for designating a medical device as sterile; - specify a quality management system for the control of all stages of production of medical devices; - specify requirements for occupational safety associated with the design and operation of irradiation facilities; - specify requirements for the sterilization of used or reprocessed devices

  3. Development of a near-net-shape casting technology for the U-6Nb alloy. Part 1: Materials characterization, experiment design, and model construction

    International Nuclear Information System (INIS)

    Taylor, M.J.; Keeney, J.A.; Wendel, M.W.; Demint, A.L.

    1997-01-01

    The Oak Ridge Y-12 Plant (Y-12) is conducting highly coupled experimental and numerical studies to develop the technology needed to produce near-net-shape (NNS)-cast uranium-6 wt% niobium (U-6Nb) components which have a controlled carbon content. Current activities are focused on defining mechanical and metallurgical properties of cast material; experimental studies to define NNS casting, carbide particle flotation, and immersion-quench physics; and developing the numerical models needed to support the optimized design of NNS components. This paper summarizes the material characterization, experiment design, and model development activities

  4. Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices

    International Nuclear Information System (INIS)

    2007-01-01

    This part of ISO 11135 describes requirements that, if met, will provide an ethylene oxide sterilization process intended to sterilize medical devices, which has appropriate microbicidal activity. Furthermore, compliance with the requirements ensures that this activity is both reliable and reproducible so that it can be predicted, with reasonable confidence, that there is a low level of probability of there being a viable microorganism present on product after sterilization. Specification of this probability is a matter for regulatory authorities and may vary from country to country. The paper provides information on scope, normative references, terms and definitions, quality management systems, sterilizing agent characterization, process and equipment characterization, product definition, process definition, validation, routine monitoring and control, product release from sterilization and maintaining process effectiveness followed by Annex A (Determination of lethal rate of the sterilization process - Biological indicator/bioburden approach), Annex B (Conservative determination of lethal rate of the sterilization process - Overkill approach, annex C (General guidance) and a bibliography.

  5. Geochemical databases. Part 1. Pmatch: a program to manage thermochemical data. Part 2. The experimental validation of geochemical computer models

    International Nuclear Information System (INIS)

    Pearson, F.J. Jr.; Avis, J.D.; Nilsson, K.; Skytte Jensen, B.

    1993-01-01

    This work is carried out under cost-sharing contract with European Atomic Energy Community in the framework of its programme on Management and Storage of Radioactive Wastes. Part 1: PMATCH, A Program to Manage Thermochemical Data, describes the development and use of a computer program, by means of which new thermodynamic data from literature may be referenced to a common frame and thereby become internally consistent with an existing database. The report presents the relevant thermodynamic expressions and their use in the program is discussed. When there is not sufficient thermodynamic data available to describe a species behaviour under all conceivable conditions, the problems arising are thoroughly discussed and the available data is handled by approximating expressions. Part II: The Experimental Validation of Geochemical Computer models are the results of experimental investigations of the equilibria established in aqueous suspensions of mixtures of carbonate minerals (Calcium, magnesium, manganese and europium carbonates) compared with theoretical calculations made by means of the geochemical JENSEN program. The study revealed that the geochemical computer program worked well, and that its database was of sufficient validity. However, it was observed that experimental difficulties could hardly be avoided, when as here a gaseous component took part in the equilibria. Whereas the magnesium and calcium carbonates did not demonstrate mutual solid solubility, this produced abnormal effects when manganese and calcium carbonates were mixed resulting in a diminished solubility of both manganese and calcium. With tracer amounts of europium added to a suspension of calcite in sodium carbonate solutions long term experiments revealed a transition after 1-2 months, whereby the tracer became more strongly adsorbed onto calcite. The transition is interpreted as the nucleation and formation of a surface phase incorporating the 'species' NaEu(Co 3 ) 2

  6. Numerical simulation of dynamics of brushless dc motors for aerospace and other applications. Volume 1: Model development and applications, part A

    Science.gov (United States)

    Demerdash, N. A. O.; Nehl, T. W.

    1979-01-01

    The development, fabrication and evaluation of a prototype electromechanical actuator (EMA) is discussed. Application of the EMA as a motor for control surfaces in aerospace flight is examined. A mathematical model of the EMA is developed for design optimization. Nonlinearities which complicate the mathematical model are discussed. The dynamics of the EMA from the underlying physical principles are determined and a discussion of similating the control logic by means of equivalent boolean expressions is presented.

  7. Research on the proficient machine system. Theoretical part; Jukutatsu machine system no chosa kenkyu. Rironhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The basic theory of the proficient machine system to be developed was studied. Important proficient techniques in manufacturing industries are becoming extinct because of insufficient succession to next generation. The proficient machine system was proposed to cope with such situation. This machine system includes the mechanism for progress and evolution of techniques and sensibilities to be adaptable to environmental changes by learning and recognizing various motions such as work and process. Consequently, the basic research fields are composed of thought, learning, perception and action. This machine requires not only deigned fixed functions but also introduction of the same proficient concept as human being to be adaptable to changes in situation, purpose, time and machine`s complexity. This report explains in detail the basic concept, system principle, approaching procedure and practical elemental technologies of the proficient machine system, and also describes the future prospect. 133 refs., 110 figs., 7 tabs.

  8. Cyclopentane combustion chemistry. Part I: Mechanism development and computational kinetics

    KAUST Repository

    Rachidi, Mariam El

    2017-06-23

    Cycloalkanes are significant constituents of conventional fossil fuels, in which they are one of the main contributors to soot formation, but also significantly influence the ignition characteristics below ∼900K. This paper discusses the development of a detailed high- and low-temperature oxidation mechanism for cyclopentane, which is an important archetypical cycloalkane. The differences between cyclic and non-cyclic alkane chemistry, and thus the inapplicability of acyclic alkane analogies, required the detailed theoretical investigation of the kinetics of important cyclopentane oxidation reactions as part of the mechanism development. The cyclopentyl+O reaction was investigated at the UCCSD(T)-F12a/cc-pVTZ-F12//M06-2X/6-311++G(d,p) level of theory in a time-dependent master equation framework. Comparisons with analogous cyclohexane or non-cyclic alkane reactions are presented. Our study suggests that beyond accurate quantum chemistry the inclusion of pressure dependence and especially that of formally direct kinetics is crucial even at pressures relevant for practical application.

  9. Cyclopentane combustion chemistry. Part I: Mechanism development and computational kinetics

    KAUST Repository

    Rachidi, Mariam El; Mehl, Marco; Pitz, William J.; Mohamed, Samah; Sarathy, Mani

    2017-01-01

    Cycloalkanes are significant constituents of conventional fossil fuels, in which they are one of the main contributors to soot formation, but also significantly influence the ignition characteristics below ∼900K. This paper discusses the development of a detailed high- and low-temperature oxidation mechanism for cyclopentane, which is an important archetypical cycloalkane. The differences between cyclic and non-cyclic alkane chemistry, and thus the inapplicability of acyclic alkane analogies, required the detailed theoretical investigation of the kinetics of important cyclopentane oxidation reactions as part of the mechanism development. The cyclopentyl+O reaction was investigated at the UCCSD(T)-F12a/cc-pVTZ-F12//M06-2X/6-311++G(d,p) level of theory in a time-dependent master equation framework. Comparisons with analogous cyclohexane or non-cyclic alkane reactions are presented. Our study suggests that beyond accurate quantum chemistry the inclusion of pressure dependence and especially that of formally direct kinetics is crucial even at pressures relevant for practical application.

  10. High-energy-physics studies. Progress report, Part II. Theoretical program

    International Nuclear Information System (INIS)

    1982-01-01

    The main topics of investigation have been the theory, construction, and application of gauge models. The major sub-areas of our research this year are: (1) realization of fermion chiral symmetries, either through massless composite fermions (exact symmetry) or Goldstone bosons (spontaneously broken symmetry); applications to dynamically broken gauge theories; (2) mean field theory approach to solutions of a QCD effective Lagrangian with static quark sources; (3) supersymmetry and grand unified theories; (4) neutrino mixing in grand unified theories; (5) implications of the large N limit; (6) composite models of leptons and quarks; experimental test for quark and lepton substructure; (7) lattice gauge theories; and (8) glueball theory and phenomenology

  11. Content validity--establishing and reporting the evidence in newly developed patient-reported outcomes (PRO) instruments for medical product evaluation: ISPOR PRO good research practices task force report: part 1--eliciting concepts for a new PRO instrument.

    Science.gov (United States)

    Patrick, Donald L; Burke, Laurie B; Gwaltney, Chad J; Leidy, Nancy Kline; Martin, Mona L; Molsen, Elizabeth; Ring, Lena

    2011-12-01

    The importance of content validity in developing patient reported outcomes (PRO) instruments is stressed by both the US Food and Drug Administration and the European Medicines Agency. Content validity is the extent to which an instrument measures the important aspects of concepts that developers or users purport it to assess. A PRO instrument measures the concepts most significant and relevant to a patient's condition and its treatment. For PRO instruments, items and domains as reflected in the scores of an instrument should be important to the target population and comprehensive with respect to patient concerns. Documentation of target population input in item generation, as well as evaluation of patient understanding through cognitive interviewing, can provide the evidence for content validity. Developing content for, and assessing respondent understanding of, newly developed PRO instruments for medical product evaluation will be discussed in this two-part ISPOR PRO Good Research Practices Task Force Report. Topics include the methods for generating items, documenting item development, coding of qualitative data from item generation, cognitive interviewing, and tracking item development through the various stages of research and preparing this tracking for submission to regulatory agencies. Part 1 covers elicitation of key concepts using qualitative focus groups and/or interviews to inform content and structure of a new PRO instrument. Part 2 covers the instrument development process, the assessment of patient understanding of the draft instrument using cognitive interviews and steps for instrument revision. The two parts are meant to be read together. They are intended to offer suggestions for good practices in planning, executing, and documenting qualitative studies that are used to support the content validity of PRO instruments to be used in medical product evaluation. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR

  12. Development of a theoretical framework of factors affecting patient safety incident reporting: a theoretical review of the literature.

    Science.gov (United States)

    Archer, Stephanie; Hull, Louise; Soukup, Tayana; Mayer, Erik; Athanasiou, Thanos; Sevdalis, Nick; Darzi, Ara

    2017-12-27

    The development and implementation of incident reporting systems within healthcare continues to be a fundamental strategy to reduce preventable patient harm and improve the quality and safety of healthcare. We sought to identify factors contributing to patient safety incident reporting. To facilitate improvements in incident reporting, a theoretical framework, encompassing factors that act as barriers and enablers ofreporting, was developed. Embase, Ovid MEDLINE(R) and PsycINFO were searched to identify relevant articles published between January 1980 and May 2014. A comprehensive search strategy including MeSH terms and keywords was developed to identify relevant articles. Data were extracted by three independent researchers; to ensure the accuracy of data extraction, all studies eligible for inclusion were rescreened by two reviewers. The literature search identified 3049 potentially eligible articles; of these, 110 articles, including >29 726 participants, met the inclusion criteria. In total, 748 barriers were identified (frequency count) across the 110 articles. In comparison, 372 facilitators to incident reporting and 118 negative cases were identified. The top two barriers cited were fear of adverse consequences (161, representing 21.52% of barriers) and process and systems of reporting (110, representing 14.71% of barriers). In comparison, the top two facilitators were organisational (97, representing 26.08% of facilitators) and process and systems of reporting (75, representing 20.16% of facilitators). A wide range of factors contributing to engagement in incident reporting exist. Efforts that address the current tendency to under-report must consider the full range of factors in order to develop interventions as well as a strategic policy approach for improvement. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  13. Development of a theoretical framework of factors affecting patient safety incident reporting: a theoretical review of the literature

    Science.gov (United States)

    Hull, Louise; Soukup, Tayana; Mayer, Erik; Athanasiou, Thanos; Sevdalis, Nick; Darzi, Ara

    2017-01-01

    Objectives The development and implementation of incident reporting systems within healthcare continues to be a fundamental strategy to reduce preventable patient harm and improve the quality and safety of healthcare. We sought to identify factors contributing to patient safety incident reporting. Design To facilitate improvements in incident reporting, a theoretical framework, encompassing factors that act as barriers and enablers ofreporting, was developed. Embase, Ovid MEDLINE(R) and PsycINFO were searched to identify relevant articles published between January 1980 and May 2014. A comprehensive search strategy including MeSH terms and keywords was developed to identify relevant articles. Data were extracted by three independent researchers; to ensure the accuracy of data extraction, all studies eligible for inclusion were rescreened by two reviewers. Results The literature search identified 3049 potentially eligible articles; of these, 110 articles, including >29 726 participants, met the inclusion criteria. In total, 748 barriers were identified (frequency count) across the 110 articles. In comparison, 372 facilitators to incident reporting and 118 negative cases were identified. The top two barriers cited were fear of adverse consequences (161, representing 21.52% of barriers) and process and systems of reporting (110, representing 14.71% of barriers). In comparison, the top two facilitators were organisational (97, representing 26.08% of facilitators) and process and systems of reporting (75, representing 20.16% of facilitators). Conclusion A wide range of factors contributing to engagement in incident reporting exist. Efforts that address the current tendency to under-report must consider the full range of factors in order to develop interventions as well as a strategic policy approach for improvement. PMID:29284714

  14. Sixteenth International Laser Radar Conference, Part 1

    International Nuclear Information System (INIS)

    Mccormick, M.P.

    1992-07-01

    This publication contains extended abstracts of papers presented at the 16th International Laser Radar Conference. One-hundred ninety-five papers were presented in both oral and poster sessions. The topics of the conference sessions were: (1) Mt. Pinatubo Volcanic Dust Layer Observations; (2) Global Change/Ozone Measurements; (3) GLOBE/LAWS/LITE; (4) Mesospheric Measurements and Measurement Systems; (5) Middle Atmosphere; (6) Wind Measurements and Measurement Systems; (7) Imaging and Ranging; (8) Water Vapor Measurements; (9) Systems and Facilities; and (10) Laser Devices and Technology. This conference reflects the breadth of research activities being conducted in the lidar field. These abstracts address subjects from lidar-based atmospheric investigations relating to global change to the development of new lidar systems and technology

  15. Heart sounds: are you listening? Part 1.

    Science.gov (United States)

    Reimer-Kent, Jocelyn

    2013-01-01

    All nurses should have an understanding of heart sounds and be proficient in cardiac auscultation. Unfortunately, this skill is not part of many nursing school curricula, nor is it necessarily a required skillfor employment. Yet, being able to listen and accurately describe heart sounds has tangible benefits to the patient, as it is an integral part of a complete cardiac assessment. In this two-part article, I will review the fundamentals of cardiac auscultation, how cardiac anatomy and physiology relate to heart sounds, and describe the various heart sounds. Whether you are a beginner or a seasoned nurse, it is never too early or too late to add this important diagnostic skill to your assessment tool kit.

  16. Numerical simulation of dynamics of brushless dc motors for aerospace and other applications. Volume 1: Model development and applications, part B

    Science.gov (United States)

    Demerdash, N. A. O.; Nehl, T. W.

    1979-01-01

    A mathematical model was developed and computerized simulations were obtained for a brushless dc motor. Experimentally obtained oscillograms of the machine phase currents are presented and the corresponding current and voltage waveforms for various modes of operation of the motor are presented and discussed.

  17. The International College of Neuropsychopharmacology (CINP) Treatment Guidelines for Bipolar Disorder in Adults (CINP-BD-2017), Part 1: Background and Methods of the Development of Guidelines.

    Science.gov (United States)

    Fountoulakis, Konstantinos N; Young, Allan; Yatham, Lakshmi; Grunze, Heinz; Vieta, Eduard; Blier, Pierre; Moeller, Hans Jurgen; Kasper, Siegfried

    2017-02-01

    This paper includes a short description of the important clinical aspects of Bipolar Disorder with emphasis on issues that are important for the therapeutic considerations, including mixed and psychotic features, predominant polarity, and rapid cycling as well as comorbidity. The workgroup performed a review and critical analysis of the literature concerning grading methods and methods for the development of guidelines. The workgroup arrived at a consensus to base the development of the guideline on randomized controlled trials and related meta-analyses alone in order to follow a strict evidence-based approach. A critical analysis of the existing methods for the grading of treatment options was followed by the development of a new grading method to arrive at efficacy and recommendation levels after the analysis of 32 distinct scenarios of available data for a given treatment option. The current paper reports details on the design, method, and process for the development of CINP guidelines for the treatment of Bipolar Disorder. The rationale and the method with which all data and opinions are combined in order to produce an evidence-based operationalized but also user-friendly guideline and a specific algorithm are described in detail in this paper. © The Author 2016. Published by Oxford University Press on behalf of CINP.

  18. Recent Developments in Radioastronomy--Part 2.

    Science.gov (United States)

    Booth, R. S.

    1980-01-01

    Described are recent developments and discoveries in radioastronomy. Topics discussed include galactic structures, stellar evolution, the binary pulsar and general relativity, extragalactic radioastronomy, model of the source of radioactive emission and quasars. (DS)

  19. Research and development of a high-temperature helium-leak detection system (joint research). Part 1 survey on leakage events and current leak detection technology

    Energy Technology Data Exchange (ETDEWEB)

    Sakaba, Nariaki; Nakazawa, Toshio; Kawasaki, Kozo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Urakami, Masao; Saisyu, Sadanori [Japan Atomic Power Co., Tokyo (Japan)

    2003-03-01

    In High Temperature Gas-cooled Reactors (HTGR), the detection of leakage of helium at an early stage is very important for the safety and stability of operations. Since helium is a colourless gas, it is generally difficult to identify the location and the amount of leakage when very little leakage has occurred. The purpose of this R and D is to develop a helium leak detection system for the high temperature environment appropriate to the HTGR. As the first step in the development, this paper describes the result of surveying leakage events at nuclear facilities inside and outside Japan and current gas leakage detection technology to adapt optical-fibre detection technology to HTGRs. (author)

  20. Accessibility, equity and efficiency. Part 1: Introduction

    NARCIS (Netherlands)

    Geurs, Karst Teunis; Dentinho, T.; Patuelli, R.; Geurs, K.T.; Patuelli, R.; Dentinho, T.

    2016-01-01

    The tension between efficiency and equity has been the focus of major debate since equity aspects started to be considered as part of project evaluation procedures (Thomopoulos et al. 2009). In this book, we contribute to the debate by focusing on the links and trade-offs between accessibility,

  1. Numerical methods in nuclear engineering. Part 1

    International Nuclear Information System (INIS)

    Phillips, G.J.

    1983-08-01

    These proceedings, published in two parts contain the full text of 56 papers and summaries of six papers presented at the conference. They cover the use of numerical methods in thermal hydraulics, reactor physics, neutron diffusion, subchannel analysis, risk assessment, transport theory, and fuel behaviour

  2. Professional Development and Use of Digital Technologies by Science Teachers: a Review of Theoretical Frameworks

    Science.gov (United States)

    Fernandes, Geraldo W. Rocha; Rodrigues, António M.; Ferreira, Carlos Alberto

    2018-03-01

    This article aims to characterise the research on science teachers' professional development programs that support the use of Information and Communication Technologies (ICTs) and the main trends concerning the theoretical frameworks (theoretical foundation, literature review or background) that underpin these studies. Through a systematic review of the literature, 76 articles were found and divided into two axes on training science teachers and the use of digital technologies with their categories. The first axis (characterisation of articles) presents the category key features that characterise the articles selected (major subjects, training and actions for the professional development and major ICT tools and digital resources). The second axis (trends of theoretical frameworks) has three categories organised in theoretical frameworks that emphasise the following: (a) the digital technologies, (b) prospects of curricular renewal and (c) cognitive processes. It also characterised a group of articles with theoretical frameworks that contain multiple elements without deepening them or that even lack a theoretical framework that supports the studies. In this review, we found that many professional development programs for teachers still use inadequate strategies for bringing about change in teacher practices. New professional development proposals are emerging with the objective of minimising such difficulties and this analysis could be a helpful tool to restructure those proposals.

  3. Theoretical Coalescence: A Method to Develop Qualitative Theory: The Example of Enduring.

    Science.gov (United States)

    Morse, Janice M

    Qualitative research is frequently context bound, lacks generalizability, and is limited in scope. The purpose of this article was to describe a method, theoretical coalescence, that provides a strategy for analyzing complex, high-level concepts and for developing generalizable theory. Theoretical coalescence is a method of theoretical expansion, inductive inquiry, of theory development, that uses data (rather than themes, categories, and published extracts of data) as the primary source for analysis. Here, using the development of the lay concept of enduring as an example, I explore the scientific development of the concept in multiple settings over many projects and link it within the Praxis Theory of Suffering. As comprehension emerges when conducting theoretical coalescence, it is essential that raw data from various different situations be available for reinterpretation/reanalysis and comparison to identify the essential features of the concept. The concept is then reconstructed, with additional inquiry that builds description, and evidence is conducted and conceptualized to create a more expansive concept and theory. By utilizing apparently diverse data sets from different contexts that are linked by certain characteristics, the essential features of the concept emerge. Such inquiry is divergent and less bound by context yet purposeful, logical, and with significant pragmatic implications for practice in nursing and beyond our discipline. Theoretical coalescence is a means by which qualitative inquiry is broadened to make an impact, to accommodate new theoretical shifts and concepts, and to make qualitative research applied and accessible in new ways.

  4. Developing a Motion Comic for HIV/STD Prevention for Young People Ages 15-24, Part 1: Listening to Your Target Audience.

    Science.gov (United States)

    Willis, Leigh A; Kachur, Rachel; Castellanos, Ted J; Spikes, Pilgrim; Gaul, Zaneta J; Gamayo, Ashley C; Durham, Marcus; Jones, Sandra; Nichols, Kristen; Han Barthelemy, Solange; LaPlace, Lisa; Staatz, Colleen; Hogben, Matthew; Robinson, Susan; Brooks, John T; Sutton, Madeline Y

    2018-02-01

    Young people (15-24 years) in the United States are disproportionately affected by infection with human immunodeficiency virus (HIV) and sexually transmitted diseases (STD). Shortfalls in HIV/STD-related knowledge, attitudes, beliefs, and behavioral intentions (KABI) likely contribute to this discrepancy. In this report we describe our experience developing a novel means of health communication combining entertainment-education theory and recent technological advances to create a HIV/STD-focused "motion comic." We also report the audience satisfaction and acceptance of the intervention. We used the Health Belief Model (HBM), entertainment-education (EE) principles, and the Sabido Method (SM) and conducted three rounds of focus groups to develop a 38-minute HIV/STD focused motion comic for young people between the ages 15 and 24 years. Participants indicated that motion comics were an acceptable method of delivering HIV/STD prevention messages. They also expressed satisfaction with motion comics plot, story settings, the tone of humor, and drama. Our results suggest that motion comics are a viable new method of delivering health communication messages about HIV/STD and other public health issues, and warrant further development and broader evaluation.

  5. CareTrack Kids—part 1. Assessing the appropriateness of healthcare delivered to Australian children: study protocol for clinical indicator development

    Science.gov (United States)

    Wiles, Louise K; Hooper, Tamara D; Hibbert, Peter D; White, Les; Mealing, Nicole; Jaffe, Adam; Cowell, Christopher T; Runciman, William B; Goldstein, Stan; Hallahan, Andrew R; Wakefield, John G; Murphy, Elisabeth; Lau, Annie; Wheaton, Gavin; Williams, Helena M; Hughes, Clifford; Braithwaite, Jeffrey

    2015-01-01

    Introduction Despite the widespread availability of clinical guidelines, considerable gaps remain between the care that is recommended (appropriate care) and the care provided. This protocol describes a research methodology to develop clinical indicators for appropriate care for common paediatric conditions. Methods and analysis We will identify conditions amenable to population-level appropriateness of care research and develop clinical indicators for each condition. Candidate conditions have been identified from published research; burden of disease, prevalence and frequency of presentation data; and quality of care priority lists. Clinical indicators will be developed through searches of national and international guidelines, and formatted with explicit criteria for inclusion, exclusion, time frame and setting. Experts will review the indicators using a wiki-based approach and modified Delphi process. A formative evaluation of the wiki process will be undertaken. Ethics and dissemination Human Research Ethics Committee approvals have been received from Sydney Children's Hospital Network, Children's Health Queensland Hospital and Health Service, and the Women's and Children's Health Network (South Australia). Applications are under review with Macquarie University and the Royal Australian College of General Practitioners. We will submit the results of the study to relevant journals and offer national and international presentations. PMID:25854976

  6. A Systems Approach to Identifying Exploration and Development Opportunities in the Illinois Basin: Digital Portifolio of Plays in Underexplored Lower Paleozoic Rocks [Part 1 of 2

    Energy Technology Data Exchange (ETDEWEB)

    Seyler, Beverly; Harris, David; Keith, Brian; Huff, Bryan; Lasemi, Yaghoob

    2008-06-30

    This study examined petroleum occurrence in Ordovician, Silurian and Devonian reservoirs in the Illinois Basin. Results from this project show that there is excellent potential for additional discovery of petroleum reservoirs in these formations. Numerous exploration targets and exploration strategies were identified that can be used to increase production from these underexplored strata. Some of the challenges to exploration of deeper strata include the lack of subsurface data, lack of understanding of regional facies changes, lack of understanding the role of diagenetic alteration in developing reservoir porosity and permeability, the shifting of structural closures with depth, overlooking potential producing horizons, and under utilization of 3D seismic techniques. This study has shown many areas are prospective for additional discoveries in lower Paleozoic strata in the Illinois Basin. This project implemented a systematic basin analysis approach that is expected to encourage exploration for petroleum in lower Paleozoic rocks of the Illinois Basin. The study has compiled and presented a broad base of information and knowledge needed by independent oil companies to pursue the development of exploration prospects in overlooked, deeper play horizons in the Illinois Basin. Available geologic data relevant for the exploration and development of petroleum reservoirs in the Illinois Basin was analyzed and assimilated into a coherent, easily accessible digital play portfolio. The primary focus of this project was on case studies of existing reservoirs in Devonian, Silurian, and Ordovician strata and the application of knowledge gained to future exploration and development in these underexplored strata of the Illinois Basin. In addition, a review of published reports and exploration in the New Albany Shale Group, a Devonian black shale source rock, in Illinois was completed due to the recent increased interest in Devonian black shales across the United States. The New

  7. Numerical investigation of ethanol fuelled HCCI engine using stochastic reactor model. Part 1: Development of a new reduced ethanol oxidation mechanism

    International Nuclear Information System (INIS)

    Maurya, Rakesh Kumar; Akhil, Nekkanti

    2016-01-01

    Highlights: • Stochastic reactor model used for numerical study of HCCI engine. • New reduced oxidation mechanism with NOx developed (47 species and 272 reactions). • Mechanism predicts cylinder pressure and heat release with sufficient accuracy. • Mechanism was able to capture the trend in NO x emission with sufficient accuracy. - Abstract: Ethanol is considered a potential biofuel for internal combustion engines. In this study, homogeneous charge compression ignition (HCCI) simulations of ethanol engine experiments were performed using stochastic reactor model (SRM). Detailed ethanol oxidation mechanism is developed by including NO x reaction in existing detailed oxidation mechanism with 57 species and 383 reactions. Detailed ethanol mechanism with NO x used in this study contains 76 species and 495 reactions. This mechanism was reduced by direct relation graph (DRG) method, which was validated with the experimental results. Existing Lu’s 40-species skeletal mechanism with NO formation were also compared with detailed and reduced mechanisms for predicting maximum cylinder pressure, maximum heat release rate and crank angle position of maximum cylinder pressure in HCCI engine. Reduced mechanism developed in this study exhibited the best resemblance with the experimental data. This reduced mechanism was also validated by measured engine cylinder pressure curves and measured ignition delays in constant volume reactors. The results showed that reduced mechanism is capable of predicting HCCI engine performance parameters with sufficient accuracy. Sensitivity analysis was conducted to determine the influential reactions in ethanol oxidation. Results also show that detailed and reduced mechanism was able to predict NO x emission in good agreement with the corresponding experimental data.

  8. Development of system based code for integrity of FBR. Fundamental probabilistic approach, Part 1: Model calculation of creep-fatigue damage (Research report)

    International Nuclear Information System (INIS)

    Kawasaki, Nobuchika; Asayama, Tai

    2001-09-01

    Both reliability and safety have to be further improved for the successful commercialization of FBRs. At the same time, construction and operation costs need to be reduced to a same level of future LWRs. To realize compatibility among reliability, safety and, cost, the Structural Mechanics Research Group in JNC started the development of System Based Code for Integrity of FBR. This code extends the present structural design standard to include the areas of fabrication, installation, plant system design, safety design, operation and maintenance, and so on. A quantitative index is necessary to connect different partial standards in this code. Failure probability is considered as a candidate index. Therefore we decided to make a model calculation using failure probability and judge its applicability. We first investigated other probabilistic standards like ASME Code Case N-578. A probabilistic approach in the structural integrity evaluation was created based on these results, and also an evaluation flow was proposed. According to this flow, a model calculation of creep-fatigue damage was performed. This trial calculation was for a vessel in a sodium-cooled FBR. As the result of this model calculation, a crack initiation probability and a crack penetration probability were found to be effective indices. Last we discussed merits of this System Based Code, which are presented in this report. Furthermore, this report presents future development tasks. (author)

  9. Coupling of a distributed stakeholder-built system dynamics socio-economic model with SAHYSMOD for sustainable soil salinity management - Part 1: Model development

    Science.gov (United States)

    Inam, Azhar; Adamowski, Jan; Prasher, Shiv; Halbe, Johannes; Malard, Julien; Albano, Raffaele

    2017-08-01

    Effective policies, leading to sustainable management solutions for land and water resources, require a full understanding of interactions between socio-economic and physical processes. However, the complex nature of these interactions, combined with limited stakeholder engagement, hinders the incorporation of socio-economic components into physical models. The present study addresses this challenge by integrating the physical Spatial Agro Hydro Salinity Model (SAHYSMOD) with a participatory group-built system dynamics model (GBSDM) that includes socio-economic factors. A stepwise process to quantify the GBSDM is presented, along with governing equations and model assumptions. Sub-modules of the GBSDM, describing agricultural, economic, water and farm management factors, are linked together with feedbacks and finally coupled with the physically based SAHYSMOD model through commonly used tools (i.e., MS Excel and a Python script). The overall integrated model (GBSDM-SAHYSMOD) can be used to help facilitate the role of stakeholders with limited expertise and resources in model and policy development and implementation. Following the development of the integrated model, a testing methodology was used to validate the structure and behavior of the integrated model. Model robustness under different operating conditions was also assessed. The model structure was able to produce anticipated real behaviours under the tested scenarios, from which it can be concluded that the formulated structures generate the right behaviour for the right reasons.

  10. Systematic Review of Breast Cancer Biology in Developing Countries (Part 1): Africa, the Middle East, Eastern Europe, Mexico, the Caribbean and South America

    International Nuclear Information System (INIS)

    Bhikoo, Riyaz; Srinivasa, Sanket; Yu, Tzu-Chieh; Moss, David; Hill, Andrew G

    2011-01-01

    There has been no systematic appraisal of ethnicity-based variations in breast cancer (BC) biology amongst women from developing countries. A qualitative systematic review was conducted of breast cancer size, stage, grade, histological type, extra-mammary involvement, hormone receptor status as well as patient demographics. This review includes patients from Africa, the Middle East, Eastern Europe, Mexico, the Caribbean and South America. BC in these regions present at an earlier age with large aggressive tumours. Distant metastases are frequently present at the time of diagnosis. African women have a higher frequency of triple negative tumours. Over half of Middle Eastern women have lymph node involvement at the time of diagnosis. Despite experiencing a lower incidence compared to the Ashkenazi Jewish population, Palestinian women have poorer five-year survival outcomes. The majority of women from Mexico and South America have stage two or three disease whilst over sixty percent of women from Eastern Europe have either stage one or stage two disease. The biological characteristics of BC in the Caribbean cannot be fully assessed due to a paucity of data from the region. BC amongst the developing world is characterised by an early peak age of onset with aggressive biological characteristics. Strategies that improve breast cancer awareness, address amenable risk factors and improve early detection are essential

  11. The Feasibility of Teaching Science via a Socio-Historical Approach. Part 2. Classroom Materials. Practical Paper No. 303. (Part 1 of 2 Parts).

    Science.gov (United States)

    Agin, Michael Lawrence

    This publication, part 1 of two parts, presents the narrative materials for the teaching of the concept--the development of atomic energy and its social implications--growing out of a study made to determine the feasibility of teaching scientific concepts related to the social and historical developments of science and selected concepts related to…

  12. Development of novel Sol-Gel Indicators (SGI's) for in-situ environmental measurements: Part 1, Program and a new pH Sol-Gel Indicator

    International Nuclear Information System (INIS)

    Livingston, R.R.; Baylor, L.; Wicks, G.G.

    1992-01-01

    The feasibility of incorporating analytical indicators into a sol-gel glassy matrix and then coating substrates with this composite material has bee demonstrated. Substrates coated include paper, wood, glass, and the lens of an analytical probe. The first SRTC sol-gel indicator, comprising bromophenol blue dispersed in a silica matrix, was fabricated and successfully used to measure solution pH in the range of pH 3.0 to 7.5. material exhibited a quick response time, as measured by color changes both qualitatively and quantitatively, and the measuring device was reversible or reusable. Additional indicators with responses over other ranges as well as indicators sensitive to the presence of elements of interest, are also under development. The new SGI composites possess promising properties and an excellent potential for performing a variety important in-situ environmental measurements and area discussed in this report

  13. [On the way to becoming an MD (Dr. med.): What kind of support do doctoral students need? Part 1: Survey and development of a program].

    Science.gov (United States)

    Sennekamp, Monika; Paulitsch, Michael A; Broermann, Marischa; Klingebiel, Thomas; Gerlach, Ferdinand M

    2016-01-01

    In Germany, medical doctorates are regularly criticized for their insufficient quality. In order to improve the quality of doctorates and to support doctoral candidates, a department-wide doctoral research program was established at the Goethe University of Frankfurt am Main in 2011 taking into account the practical needs of doctoral students at the School of Medicine. The program development proceeded in several steps: in the first step (2009/2010), a pilot study with eleven doctoral candidates was carried out at the Institute of General Practice. Their ratings of the perceived relevance and their own knowledge of 15 topics of scientific work were used to identify a provisional need for support. Subsequently an interdisciplinary panel of experts established the program throughout the faculty. Since its implementation, a requirements analysis in the form of questionnaires has been continuously carried out in order to assess the doctoral students' prior knowledge and their preferences expressed. At the same time, systematic searches for support programs in other medical fields have been conducted throughout Germany on several occasions. On the basis of the pilot study, the research results and the expert panel discussions the following topics were found to be particularly relevant: principles of good scientific practice, literature search, reference management, organization and structure of a doctoral thesis, formatting of Word documents, clinical epidemiology and data management. A specific, stepwise development process was used to design a concept for the faculty of medicine that pays close attention to the knowledge and interests of doctoral candidates. The establishment of the doctoral research program in Frankfurt and the results of its evaluation are presented in a second article (Paulitsch et al., 2016). Copyright © 2016. Published by Elsevier GmbH.

  14. Comment on the search for the charmonium 1P1 and its theoretical interpretation

    Science.gov (United States)

    Porter, F. C.

    1984-10-01

    We comment on a recent paper which discusses the theoretical implications of the Crystal Ball search for the 1P1 state of charmonium. On behalf of the Crystal Ball collaboration: California Institute of Technology - C. Edwards, R. Partridge, C. Peck, F. Porter; Harvard University - D. Antreasyan, Y.F. Gu, K. Strauch, K. Wacker, A. Weinstein; Princeton University - D. Aschman, M. Cavalli-Sforza, D. Coyne, C. Newman-Holmes, H. Sadrozinski; Stanford Linear Accelerator Center - E. Bloom, F. Bulos, G. Godfrey, C. Kiesling, W. Lockman, M. Oreglia; Stanford University - D. Gelphman, R. Hofstadter, R. Horisberger, I. Kirkbride, H. Kolanoski, K. Königsmann, R. Lee, A. Osterheld, B. Pollock and J. Tompkins.

  15. Introduction of organic/hydro-organic matrices in inductively coupled plasma optical emission spectrometry and mass spectrometry: A tutorial review. Part I. Theoretical considerations

    International Nuclear Information System (INIS)

    Leclercq, Amélie; Nonell, Anthony; Todolí Torró, José Luis; Bresson, Carole; Vio, Laurent; Vercouter, Thomas; Chartier, Frédéric

    2015-01-01

    Highlights: • Tutorial review addressed to beginners or more experienced analysts. • Theoretical background of effects caused by organic matrices on ICP techniques. • Spatial distribution of carbon species and analytes in plasma. • Carbon spectroscopic and non-spectroscopic interferences in ICP. - Abstract: Due to their outstanding analytical performances, inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS) are widely used for multi-elemental measurements and also for isotopic characterization in the case of ICP-MS. While most studies are carried out in aqueous matrices, applications involving organic/hydro-organic matrices become increasingly widespread. This kind of matrices is introduced in ICP based instruments when classical “matrix removal” approaches such as acid digestion or extraction procedures cannot be implemented. Due to the physico-chemical properties of organic/hydro-organic matrices and their associated effects on instrumentation and analytical performances, their introduction into ICP sources is particularly challenging and has become a full topic. In this framework, numerous theoretical and phenomenological studies of these effects have been performed in the past, mainly by ICP-OES, while recent literature is more focused on applications and associated instrumental developments. This tutorial review, divided in two parts, explores the rich literature related to the introduction of organic/hydro-organic matrices in ICP-OES and ICP-MS. The present Part I, provides theoretical considerations in connection with the physico-chemical properties of organic/hydro-organic matrices, in order to better understand the induced phenomena. This focal point is divided in four chapters highlighting: (i) the impact of organic/hydro-organic matrices from aerosol generation to atomization/excitation/ionization processes; (ii) the production of carbon molecular constituents and their spatial distribution in the

  16. Introduction of organic/hydro-organic matrices in inductively coupled plasma optical emission spectrometry and mass spectrometry: A tutorial review. Part I. Theoretical considerations

    Energy Technology Data Exchange (ETDEWEB)

    Leclercq, Amélie, E-mail: amelie.leclercq@cea.fr [CEA Saclay, DEN, DANS, DPC, SEARS, Laboratoire de développement Analytique Nucléaire Isotopique et Elémentaire, 91191 Gif-sur-Yvette (France); Nonell, Anthony, E-mail: anthony.nonell@cea.fr [CEA Saclay, DEN, DANS, DPC, SEARS, Laboratoire de développement Analytique Nucléaire Isotopique et Elémentaire, 91191 Gif-sur-Yvette (France); Todolí Torró, José Luis, E-mail: jose.todoli@ua.es [Universidad de Alicante, Departamento de Quimica Analitica, Nutricion y Bromatología, Ap. de Correos, 99, 03080 Alicante (Spain); Bresson, Carole, E-mail: carole.bresson@cea.fr [CEA Saclay, DEN, DANS, DPC, SEARS, Laboratoire de développement Analytique Nucléaire Isotopique et Elémentaire, 91191 Gif-sur-Yvette (France); Vio, Laurent, E-mail: laurent.vio@cea.fr [CEA Saclay, DEN, DANS, DPC, SEARS, Laboratoire de développement Analytique Nucléaire Isotopique et Elémentaire, 91191 Gif-sur-Yvette (France); Vercouter, Thomas, E-mail: thomas.vercouter@cea.fr [CEA Saclay, DEN, DANS, DPC, SEARS, Laboratoire de développement Analytique Nucléaire Isotopique et Elémentaire, 91191 Gif-sur-Yvette (France); Chartier, Frédéric, E-mail: frederic.chartier@cea.fr [CEA Saclay, DEN, DANS, DPC, 91191 Gif-sur-Yvette (France)

    2015-07-23

    Highlights: • Tutorial review addressed to beginners or more experienced analysts. • Theoretical background of effects caused by organic matrices on ICP techniques. • Spatial distribution of carbon species and analytes in plasma. • Carbon spectroscopic and non-spectroscopic interferences in ICP. - Abstract: Due to their outstanding analytical performances, inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS) are widely used for multi-elemental measurements and also for isotopic characterization in the case of ICP-MS. While most studies are carried out in aqueous matrices, applications involving organic/hydro-organic matrices become increasingly widespread. This kind of matrices is introduced in ICP based instruments when classical “matrix removal” approaches such as acid digestion or extraction procedures cannot be implemented. Due to the physico-chemical properties of organic/hydro-organic matrices and their associated effects on instrumentation and analytical performances, their introduction into ICP sources is particularly challenging and has become a full topic. In this framework, numerous theoretical and phenomenological studies of these effects have been performed in the past, mainly by ICP-OES, while recent literature is more focused on applications and associated instrumental developments. This tutorial review, divided in two parts, explores the rich literature related to the introduction of organic/hydro-organic matrices in ICP-OES and ICP-MS. The present Part I, provides theoretical considerations in connection with the physico-chemical properties of organic/hydro-organic matrices, in order to better understand the induced phenomena. This focal point is divided in four chapters highlighting: (i) the impact of organic/hydro-organic matrices from aerosol generation to atomization/excitation/ionization processes; (ii) the production of carbon molecular constituents and their spatial distribution in the

  17. Effects of water chemistry and fluid dynamics on wall thinning behavior. Part 1. Development of FAC model focused on water chemistry and composition of material

    International Nuclear Information System (INIS)

    Fujiwara, Kazutoshi; Domae, Masafumi; Ohta, Joji; Yoneda, Kimitoshi; Inada, Fumio

    2009-01-01

    Flow Accelerated Corrosion (FAC), which is one of the important subjects at fossil and nuclear power plans, is caused by the accelerated dissolution of protective oxide film due to the turbulent flow. The influence factors on FAC such as water chemistry, material, and fluid dynamics are closely related to the oxide property so that the risk of FAC can be reduced by the suitable control of water chemistry. There are some FAC models and evaluation codes of FAC rate. Some of them are used in wall thinning management of nuclear power plant in some country. Nevertheless, these FAC codes include many empirical parameters so that some uncertainty to evaluate the synergistic effectiveness of factors are the controversial point for the application of FAC code to wall thinning management in Japanese nuclear power plant. In this study, a FAC model that can evaluate the effect of temperature, NH3 concentration, chromium content, and dissolved oxygen concentration on FAC rate was developed by considering the diffusion of dissolved species. The critical dissolved oxygen concentration, which can inhibit FAC, was also calculated by this model. (author)

  18. Automated transport and sorting system in a large reference laboratory: part 1. Evaluation of needs and alternatives and development of a plan.

    Science.gov (United States)

    Hawker, Charles D; Garr, Susan B; Hamilton, Leslie T; Penrose, John R; Ashwood, Edward R; Weiss, Ronald L

    2002-10-01

    Our laboratory, a large, commercial, esoteric reference laboratory, sought some form of total laboratory automation to keep pace with rapid growth of specimen volumes as well as to meet competitive demands for cost reduction and improved turnaround time. We conducted a systematic evaluation of our needs, which led to the development of a plan to implement an automated transport and sorting system. We systematically analyzed and studied our specimen containers, test submission requirements and temperatures, and the workflow and movement of people, specimens, and information throughout the laboratory. We performed an intricate timing study that identified bottlenecks in our manual handling processes. We also evaluated various automation options. The automation alternative viewed to best meet our needs was a transport and sorting system from MDS AutoLab. Our comprehensive plan also included a new standardized transport tube; a centralized automated core laboratory for higher volume tests; a new "automation-friendly" software system for order entry, tracking, and process control; a complete reengineering of our order-entry, handling, and tracking processes; and remodeling of our laboratory facility and specimen processing area. The scope of this project and its potential impact on overall laboratory operations and performance justified the extensive time we invested (nearly 4 years) in a systematic approach to the evaluation, design, and planning of this project.

  19. Construction of an Environmentally Sustainable Development on a Modified Coastal Sand Mined and Landfill Site – Part 1. Planning and Implementation

    Directory of Open Access Journals (Sweden)

    AnneMarie Clements

    2009-06-01

    Full Text Available The Magenta Shores development fronts 2.3 km of Tuggerah Beach on a formerly sand mined and landfill site in an urban growth area on the central coast of New South Wales. To increase the natural defences against storm waves and mass sand movements, the incipient foredune was retained and the parallel beach ridge landform was re-established by mimicking natural processes. Analysis of waste and resources led to a coordinated large-scale onsite re-use, recycling and waste management program that reduced landfill, transportation and natural resource requirements. Bitou bush removed from the Coastal Protection Zone was incorporated into golf course soils to improve grass growth. Leachate in the groundwater from the former landfill was diverted away from Tuggerah Lake and re-used in golf course irrigation. Upgrade of the local sewer treatment plant and installation of a public dual pipeline servicing Magenta and the adjoining township satisfied irrigation demands and provided non-potable water for the existing and expanding urban community. The sustainability challenges of the project were met through clear identification of existing environmental risks, application of scientific research, integrated team management and stakeholders’ cooperation.

  20. Development of safety assessment method for human intrusion scenario in Japan. Part 1. Drilling scenario database for safety assessment of geological disposal (Contract research)

    International Nuclear Information System (INIS)

    Nagasawa, Hirokazu; Takeda, Seiji; Kimura, Hideo; Sasaki, Toshihisa

    2010-11-01

    In deep geological disposal or intermediate depth disposal, human intrusion, i.e. accidental excavation or drilling into the disposal site, may make a direct or an indirect effect on the disposal system. Safety assessment method for the human intrusion scenario, that is, the evaluation code of radiological effect from the human intrusion and the data to examine the reduction of the probability of the human intrusion occurring, is essential for the future safety regulation. Assuming that drilling action into the disposal site leads to the human proximity to the radioactive waste or the damage to the barrier system (drilling scenario), we have collected both the data on borehole drilling implemented in Japan and information on actual situation of drilling activities. Based on the data and information, we provide concrete exposure scenarios associated with borehole drilling in the vicinity of the repository and model for estimating the frequency on borehole reaching the depth of repository. The frequency is characterized with the relation to objective of excavation, geographical features, and region in Japan etc. We have developed an assembly of the information mentioned above as database, including the model parameters used in the code to assess radiation dose for drilling scenario. (author)

  1. From reactive to proactive: developing a valid clinical ethics needs assessment survey to support ethics program strategic planning (part 1 of 2).

    Science.gov (United States)

    Frolic, Andrea; Jennings, Barb; Seidlitz, Wendy; Andreychuk, Sandy; Djuric-Paulin, Angela; Flaherty, Barb; Peace, Donna

    2013-03-01

    As ethics committees and programs become integrated into the "usual business" of healthcare organizations, they are likely to face the predicament of responding to greater demands for service and higher expectations, without an influx of additional resources. This situation demands that ethics committees and programs allocate their scarce resources (including their time, skills and funds) strategically, rather than lurching from one ad hoc request to another; finding ways to maximize the effectiveness, efficiency, impact and quality of ethics services is essential in today's competitive environment. How can Hospital Ethics Committees (HECs) begin the process of strategic priority-setting to ensure they are delivering services where and how they are most needed? This paper describes the creation of the Clinical Ethics Needs Assessment Survey (CENAS) as a tool to understand interprofessional staff perceptions of the organization's ethical climate, challenging ethical issues and educational priorities. The CENAS was designed to support informed resource allocation and advocacy by HECs. By sharing our process of developing and validating this ethics needs assessment survey we hope to enable strategic priority-setting in other resource-strapped ethics programs, and to empower HECs to shift their focus to more proactive, quality-focused initiatives.

  2. Low-Temperature Experimental and Theoretical Rate Constants for the O(1D) + H2 Reaction.

    Science.gov (United States)

    Hickson, Kevin M; Suleimanov, Yury V

    2017-03-09

    In the present joint experimental and theoretical study, we report thermal rate constants for the O( 1 D) + H 2 reaction within the 50-300 K temperature range. Experimental kinetics measurements were performed using a continuous supersonic flow reactor coupled with pulsed laser photolysis for O( 1 D) production and pulsed laser-induced fluorescence in the vacuum ultraviolet wavelength range (VUV LIF) for O( 1 D) detection. Theoretical rate constants were obtained using the ring polymer molecular dynamics (RPMD) approach over the two lowest potential energy surfaces 1 1 A' and 1 1 A″, which possess barrierless and thermally activated energy profiles, respectively. Both the experimental and theoretical rate constants exhibit a weak temperature dependence. The theoretical results show the dominant role of the 1 1 A' ground state and that contribution of the 1 1 A″ excited state to the total thermal rate decreases dramatically at lower temperature. Agreement between the experimental and theoretical results is good, and the discrepancy does not exceed 25%. It is argued that these differences are likely to be due to nonadiabatic couplings between the 1 1 A' and 2 1 A' surfaces.

  3. Theoretical studies in nuclear reaction and nuclear structure. Final report, January 1, 1975--June 30, 1976

    International Nuclear Information System (INIS)

    Banerjee, M.K.; Griffin, J.J.

    1977-07-01

    Progress in theoretical research is reported under the following readings: (1) few nuclear reactions, Eikonal approximations, and optical models; (2) pion reactions; (3) nuclear structure by reaction studies; (4) nuclear dynamics

  4. A theoretical approach to sputtering due to molecular ion bombardment, 1

    International Nuclear Information System (INIS)

    Karashima, Shosuke; Ootoshi, Tsukuru; Kamiyama, Masahide; Kim, Pil-Hyon; Namba, Susumu.

    1981-01-01

    A shock wave model is proposed to explain theoretically the non-linear effects in sputtering phenomena by molecular ion bombardments. In this theory the sputtering processes are separated into two parts; one is due to linear effects and another is due to non-linear effects. The treatment of the linear parts is based on the statistical model by Schwarz and Helms concerning a broad range of atomic collision cascades. The non-linear parts are treated by the model of shock wave due to overlapping cascades, and useful equations to calculate the sputtering yields and the dynamical quantities in the system are derived. (author)

  5. Theoretical Grounds of Identification of the Essence of the Enterprise Development Efficiency Category

    Directory of Open Access Journals (Sweden)

    Adzhavenko Maryna M.

    2014-02-01

    Full Text Available Modern economic conditions put a new problem in front of scientists, namely: capability of an enterprise to survive in the unfavourable external environment. This problem is a system and complex one and its solution is within the plane of management of capital, personnel, development, efficiency, etc. The article marks out that efficiency is a corner stone of the modern economic science, which justifies studies of the gnoseological essence of the efficiency category. The main goal of the article lies in the study of scientific and theoretical grounds of formation of the enterprise development efficiency under modern conditions of the changing internal and external environments. The other goals of the article are identification of the essence of the development efficiency category, deepening the theoretical foundation of assessment of efficiency of enterprise development in the modern economic science. The article conducts an ontological analysis of the essence and goals of the enterprise development efficiency notion, studies evolution of scientific approaches and systemises theoretical provisions of the specified category and their assessment in the economic science. In the result of the study the article identifies a new vector of theoretical grounds and dominating logic of formation of the methodology of assessment of efficiency of enterprises under conditions of innovation development of the state, namely: it underlines principles of systemacy, complexity, self-organisation, significance of human capital as an important factor of increase of efficiency and development. Development of methodological grounds of assessment of efficiency of enterprise innovation development is a prospective direction of further studies.

  6. Electroerosión. 1a. Parte

    Directory of Open Access Journals (Sweden)

    José William Moreno Portillo

    1987-01-01

    Full Text Available Mediante este trabajo se quiere dar a conocer los principios básicos que gobiernan el proceso de electroerosión, las partes principales de los equipos que se utilizan en el proceso y sus funciones, al igual que los principios de operación y sus principales parámetros tecnológicos. También se pretende dar algunos criterios que se deben tener en cuenta para la selección de un equipo de electroerosión y se hacen algunas consideraciones sobre el diseño de piezas que se van a obtener mediante este proceso.

  7. Surgical history of ancient China: part 1.

    Science.gov (United States)

    Fu, Louis

    2009-12-01

    Although surgery was an accepted and quite proficient craft very early on in Chinese history, it has deteriorated through the ages. Despite the fact that anaesthetic agents in major surgery were employed during the third century, Chinese surgery is conspicuous by its stagnation. Reverence for the dead, filial piety, abhorrence of shedding blood and other conservative attitudes make it impossible for any accurate knowledge of the human anatomy and physiology, without which surgery cannot progress. This article surveys some highlights in the history of surgery in ancient China and examines the factors responsible for its decline. The second concluding part deals with orthopaedics.

  8. Electroerosión. 1a. Parte

    OpenAIRE

    José William Moreno Portillo

    2011-01-01

    Mediante este trabajo se quiere dar a conocer los principios básicos que gobiernan el proceso de electroerosión, las partes principales de los equipos que se utilizan en el proceso y sus funciones, al igual que los principios de operación y sus principales parámetros tecnológicos. También se pretende dar algunos criterios que se deben tener en cuenta para la selección de un equipo de electroerosión y se hacen algunas consideraciones sobre el diseño de piezas que se van a obtener mediante este...

  9. On the static structural design of climbing robots: part 1.

    Science.gov (United States)

    Ahmed, Ausama Hadi; Menon, Carlo

    This manuscript is the first of two parts of a work investigating optimal configurations of legged climbing robots while loitering on vertical surfaces. In this part 1, a mathematical model of a climbing robot based on the finite element method (FEM), specifically the stiffness method, is generated. A number of parameters, namely the height of the robot, the length of its body and the position of its legs, are investigated to assess their effect on the adhesion requirements needed for the robot to stay attached to a wall. Predictions of the developed mathematical model are validated using FEM commercial software. The body and the legs are assumed to be perpendicular to each other in this part 1. The effect of their inclination is investigated in the subsequent part 2 of our work. In part 2, the model is also used to predict postures that ants have while standing on vertical surfaces. The model is validated by comparing the predicted results to images of loitering ants. The parameters investigated provide guidelines to design legged climbing robots.

  10. Basic course theoretical physics. Vol. 5/1. Quantum mechanics - foundations. 7. upd. ed.

    International Nuclear Information System (INIS)

    Nolting, Wolfgang

    2009-01-01

    The favoured basic course theoretical physics covers in seven volumes all fields relevant for the diploma. Each volume mediates well thought the in each semester necessary theoretically-physical tools. Numerous exercise problem with extensive solutions serve for the deepening of the matter. The first part of the fifth volume begins with an inductive foundation of quantum mechanics in order to illustrate after a study and summary of the formal foundations of quantum mechanics on simple model systems the concepts and term formations. The present new edition was fundamentally worked out and supplemented. The meanwhile proved two-color presentation allows a very understandable and fast approach to the matter [de

  11. Modern spinal instrumentation. Part 1: Normal spinal implants

    International Nuclear Information System (INIS)

    Davis, W.; Allouni, A.K.; Mankad, K.; Prezzi, D.; Elias, T.; Rankine, J.; Davagnanam, I.

    2013-01-01

    The general radiologist frequently encounters studies demonstrating spinal instrumentation, either as part of the patient's postoperative evaluation or as incidental to a study performed for another purpose. There are various surgical approaches and devices used in spinal surgery with an increased understanding of spinal and spinal implant biomechanics drives development of modern fixation devices. It is, therefore, important that the radiologist can recognize commonly used devices and identify their potential complications demonstrated on imaging. The aim of part 1 of this review is to familiarize the reader with terms used to describe surgical approaches to the spine, review the function and normal appearances of commonly used instrumentations, and understand the importance of the different fixation techniques. The second part of this review will concentrate on the roles that the different imaging techniques play in assessing the instrumented spine and the recognition of complications that can potentially occur.

  12. Recent trends in rural Geography studies. Theoretical developments and research areas in Latin America

    Directory of Open Access Journals (Sweden)

    Héctor Ávila Sánchez

    2015-12-01

    Full Text Available In this paper it is made a tour through the various theoretical and methodological routes that support the Rural Geography, in its current forms. The article is part of a wider investigation into the trends and state of the art of rurality between the years 1990 and 2010, with emphasis on rural geography perspective and particularly on the contributions that establish French geography and Anglo-Saxon geography. It highlights how these influences have transcended national geographical schools in some countries of Latin America. At the beginning of the discipline in the early twentieth century, emphasizing the identification and description of landscapes, influenced by the importance of regionalist discourse. Subsequently, rural geographical studies developed under the influence of economic geography, mainly describing large areas of agricultural specialization worldwide (cereal production areas, or Mediterranean agriculture, etc.. Later, from the decade of the eighties, analyze the depth of the territorial changes that occur in rural areas, due to changes in the Fordist and post-Fordist production paradigm, and the arrangements resulting from globalization.

  13. Toward a Theoretical Model of Employee Turnover: A Human Resource Development Perspective

    Science.gov (United States)

    Peterson, Shari L.

    2004-01-01

    This article sets forth the Organizational Model of Employee Persistence, influenced by traditional turnover models and a student attrition model. The model was developed to clarify the impact of organizational practices on employee turnover from a human resource development (HRD) perspective and provide a theoretical foundation for research on…

  14. Diabetes Part 1. Definition, Diagnosis and Prevention

    African Journals Online (AJOL)

    Skoludek_R

    increasing obesity and a steady year on year rise in the incidence of type 1 ... its under-diagnosis and under-treatment leads to rapid death in T1DM and to unnecessary suffering and ... 80% of the time), T1DM presents in childhood with.

  15. AHAR: Part 1 - PIT Estimates of Homelessness

    Data.gov (United States)

    Department of Housing and Urban Development — This report outlines the key findings of the 2014 Point-In-Time (PIT) and Housing Inventory (HIC) counts conducted in January 2014. Specifically, this report...

  16. 12 CFR 516.1 - What does this part do?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false What does this part do? 516.1 Section 516.1 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPLICATION PROCESSING PROCEDURES § 516.1 What does this part do? (a) This part explains OTS procedures for processing applications...

  17. 12 CFR 557.1 - What does this part do?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false What does this part do? 557.1 Section 557.1 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY DEPOSITS General § 557.1 What does this part do? This part applies to the deposit activities of savings associations. If you are a...

  18. 12 CFR 513.1 - Scope of part.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Scope of part. 513.1 Section 513.1 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRACTICE BEFORE THE OFFICE § 513.1 Scope of part. This part prescribes rules with regard to general practice before the Office on one's own...

  19. 12 CFR 559.1 - What does this part cover?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false What does this part cover? 559.1 Section 559.1 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY SUBORDINATE ORGANIZATIONS § 559.1 What does this part cover? (a) OTS is issuing this part 559 pursuant to its general rulemaking...

  20. Canadian Contraception Consensus (Part 1 of 4).

    Science.gov (United States)

    Black, Amanda; Guilbert, Edith; Costescu, Dustin; Dunn, Sheila; Fisher, William; Kives, Sari; Mirosh, Melissa; Norman, Wendy V; Pymar, Helen; Reid, Robert; Roy, Geneviève; Varto, Hannah; Waddington, Ashley; Wagner, Marie-Soleil; Whelan, Anne Marie; Ferguson, Carrie; Fortin, Claude; Kielly, Maria; Mansouri, Shireen; Todd, Nicole

    2015-10-01

    To provide guidelines for health care providers on the use of contraceptive methods to prevent pregnancy and on the promotion of healthy sexuality. Guidance for Canadian practitioners on overall effectiveness, mechanism of action, indications, contraindications, non-contraceptive benefits, side effects and risks, and initiation of cited contraceptive methods; family planning in the context of sexual health and general well-being; contraceptive counselling methods; and access to, and availability of, cited contraceptive methods in Canada. Published literature was retrieved through searches of Medline and The Cochrane Database from January 1994 to January 2015 using appropriate controlled vocabulary (e.g., contraception, sexuality, sexual health) and key words (e.g., contraception, family planning, hormonal contraception, emergency contraception). Results were restricted to systematic reviews, randomized control trials/controlled clinical trials, and observational studies published in English from January 1994 to January 2015. Searches were updated on a regular basis and incorporated in the guideline to June 2015. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of the evidence in this document was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table). Chapter 1: Contraception in Canada Summary Statements 1. Canadian women spend a significant portion of their lives at risk of an unintended pregnancy. (II-2) 2. Effective contraceptive methods are underutilized in Canada, particularly among vulnerable populations. (II-2) 3. Long-acting reversible contraceptive methods, including contraceptive implants and intrauterine contraception (copper-releasing and levonorgestrel

  1. [Medicine in ancient Mesopotamia--part 1].

    Science.gov (United States)

    Martins E Silva, J

    2009-01-01

    The present work summarizes the more elucidating aspects on the foundations and the practice of the medicine in Antique Mesopotamia, since the invention of the writing, more than 5000 thousand years ago, and the beginning of our era. The first part of the article includes a brief perspective about the political and social evolution that characterized those archaic civilizations, as well as the inventions and knowledge further used by the following Humanity's generations. Most of what is known on the subject, as well as the history and political-social events that occurred in the region during that remote epoch, resulted of the laborious decoding of about half a million small clay plates or fragments with text engravings in cuneiform characters that were discovered since the middle of the XIX century in the ruins of the main cities of the Babylonian and Assyrian empires. The second part embraces exclusively the main characteristics of the medicine in Ancient Mesopotamia, in its main facets: concept of disease, healers and practice. The disease was considered a divine punishment or resultant from a malign influence. In that base, the medicine began by being preventive, by the use of appropriate amulets, or by offerings or sacrifices intending to pacify those malign forces. The treatment of the generality of the diseases privileged the expulsion of those spirits and malign influences from the patient body, purifying it, which was done by the specific intervention of an ãshipu (clergyman-exorcist); not having results, the treatment was continued by the asû (practical healer) that appealed to a group of physical manipulations, limited surgical acts and the administration or application of prescriptions, resultants of the mixture of organic and inorganic substances. In case of failing, the patients (as well as individuals or rein leaders) could fall back upon a priest diviner (bârû) who, by examination of the organs of an animal especially sacrificed for the effect

  2. Research in theoretical nuclear physics. Final report, April 1, 1993 - March 31, 1996

    International Nuclear Information System (INIS)

    Udagawa, Takeshi

    1997-08-01

    This report describes the accomplishments in basic research in nuclear physics carried out by the theoretical nuclear physics group in the Department of Physics at the University of Texas at Austin, during the period of April 1, 1993 to March 31, 1996. The work done covers three separate areas, low energy nuclear reactions, intermediate energy physics, and nuclear structure studies. Although the various subjects are spread among different areas, they are all based on two techniques that they have developed in previous years. These techniques are: (a) a powerful method for continuum-random-phase-approximation (CRPA) calculations of the nuclear response; and, (b) the direct reaction approach to complete and incomplete fusion reactions, which enables them to describe on a single footing all the different types of nuclear reactions, i.e., complete fusion, incomplete fusion and direct reactions, in a systematic way based on a single theoretical framework. In this report, the authors first summarize their achievements in these three areas, and then present final remarks

  3. Compact tokamak reactors. Part 1 (analytic results)

    International Nuclear Information System (INIS)

    Wootton, A.J.; Wiley, J.C.; Edmonds, P.H.; Ross, D.W.

    1996-01-01

    We discuss the possible use of tokamaks for thermonuclear power plants, in particular tokamaks with low aspect ratio and copper toroidal field coils. Three approaches are presented. First we review and summarize the existing literature. Second, using simple analytic estimates, the size of the smallest tokamak to produce an ignited plasma is derived. This steady state energy balance analysis is then extended to determine the smallest tokamak power plant, by including the power required to drive the toroidal field, and considering two extremes of plasma current drive efficiency. The analytic results will be augmented by a numerical calculation which permits arbitrary plasma current drive efficiency; the results of which will be presented in Part II. Third, a scaling from any given reference reactor design to a copper toroidal field coil device is discussed. Throughout the paper the importance of various restrictions is emphasized, in particular plasma current drive efficiency, plasma confinement, plasma safety factor, plasma elongation, plasma beta, neutron wall loading, blanket availability and recirculating electric power. We conclude that the latest published reactor studies, which show little advantage in using low aspect ratio unless remarkably high efficiency plasma current drive and low safety factor are combined, can be reproduced with the analytic model

  4. On-line alkali monitoring - Part 1

    International Nuclear Information System (INIS)

    Andersson, Christer; Ljung, P.; Woxlin, H.

    1997-02-01

    As a consequence of the increased knowledge of the environmental impact of combustion based heat and power generation, the use of renewable biofuels will be increased. An obstacle associated to biofuel combustion compared to other fuels is the large release of alkali. Alkali compounds in flue gases are known to cause severe operational problems. Three of the major problems are; fouling of superheating tubes (causing reduced heat transfer and possibly corrosion), agglomeration of the bed material in fluidized beds, and poisoning of SCR catalysts. Yet another alkali related problem arises when, in order to increase the electric efficiency of combustion power plants, combined-cycle technology is used. Alkali vapour present in the fuel gas for the gas turbine is condensed to particles which increase corrosion and erosion of the turbine blades. The research on ash related operational problems has to be extended in order to ensure future use of biofuels in heat and power generation. In all successful research, adequate tools are necessary. To investigate ash related problems the key issue is to be able to perform continuous alkali measurements. This pilot study has investigated the need of continuous alkali measurements, which alkali species are harmful in the different applications and also available instrumentation capable of measuring the specific alkali species. The report gives a short summary presenting alkali related operational problems. In addition a schematic overview is given, showing the alkali species that possibly can exist in various parts of the power plant. 48 refs, 13 figs, 4 tabs

  5. Nanotechnology for forest products. Part 1

    Science.gov (United States)

    Theodore Wegner; Phil Jones

    2005-01-01

    Nano-sized particles may be small, but for our industry they offer huge potential. Nanotechnology represents a major opportunity for the forest products industry to develop new products, substantially reduce processing costs, and open new markets in the coming decades.

  6. The Human Resources Management System: Part 1.

    Science.gov (United States)

    Ceriello, Vincent R.

    1982-01-01

    Presents a systematic and disciplined approach to planning for the development and implementation of an information system which will collect, store, maintain, and report human resources data. Discusses guidelines, priorities, training requirements, security, auditing, interface with payroll, and personnel reporting. (CT)

  7. Nanopharmaceuticals (part 1): products on the market

    OpenAIRE

    Weissig, Volkmar; Pettinger,Tracy; Murdock,Nicole

    2014-01-01

    Volkmar Weissig,1 Tracy K Pettinger,2 Nicole Murdock3 1Department of Pharmaceutical Sciences, Midwestern University College of Pharmacy Glendale, Glendale, AZ, USA; 2Department of Pharmacy Practice and Administrative Sciences, College of Pharmacy, Idaho State University, Pocatello, ID, USA; 3Department of Pharmacy Practice, Midwestern University College of Pharmacy Glendale, Glendale, AZ, USA Abstract: In 2000, the National Institute of Health launched the National Nanotec...

  8. Nanopharmaceuticals (part 1): products on the market.

    Science.gov (United States)

    Weissig, Volkmar; Pettinger, Tracy K; Murdock, Nicole

    2014-01-01

    In 2000, the National Institute of Health launched the National Nanotechnology Initiative to support, coordinate, and advance research and development of nanoscale projects. The impact of this new program on health-science related research and development became quickly visible. Broad governmental financial support advanced the start of new, and the deepening of already existing, interdisciplinary research. The anticipated merger of nanoscience with medicine quickly instigated the conceptualization of nanomedicine. The adoption of nanoscience terminology by pharmaceutical scientists resulted in the advent of nanopharmaceuticals. The term "nano" became tantamount to "cutting-edge" and was quickly embraced by the pharmaceutical science community. Colloidal drug delivery systems reemerged as nanodrug delivery systems; colloidal gold became a suspension of nano gold particles. In this review, we first review nanoscience related definitions applied to pharmaceuticals, we then discuss all 43 currently approved drug formulations which are publicized as nanopharmaceuticals, and finally we analyze clinical aspects of selected drug formulations.

  9. V&V Framework Part 1 Release

    Energy Technology Data Exchange (ETDEWEB)

    Hills, Richard G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Maniaci, David Charles [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Naughton, Jonathan [Univ. Of Wyoming, Laramie, WY (United States)

    2015-02-01

    The objective of this document is to accurately predict, assess and optimize wind plant performance utilizing High Performance Modeling (HPC) tools developed in a community-based, open-source simulation environment to understand and accurately predict the fundamental physics and complex flows of the atmospheric boundary layer, interaction with the wind plant, as well as the response of individual turbines to the complex flows within that plant

  10. Medical students' perceptions of their development of 'soft skills' Part ...

    African Journals Online (AJOL)

    One of the aims of the reform was to provide more teaching and learning opportunities for the development of soft skills. Soft skills include professional interpersonal and social skills, communication skills, and professional and ethical attitudes. Methods As symbolic interactionism was used as the theoretical framework to ...

  11. Pyroclast/snow interactions and thermally driven slurry formation. Part 2: Experiments and theoretical extension to polydisperse tephra

    Science.gov (United States)

    Walder, J.S.

    2000-01-01

    Erosion of snow by pyroclastic flows and surges presumably involves mechanical scour, but there may be thermally driven phenomena involved as well. To investigate this possibility, layers of hot (up to 400??C), uniformly sized, fine- to medium-grained sand were emplaced vertically onto finely shaved ice ('snow'); thus there was no relative shear motion between sand and snow and no purely mechanical scour. In some cases large vapor bubbles, commonly more than 10 mm across, rose through the sand layer, burst at the surface, and caused complete convective overturn of the sand, which then scoured and mixed with snow and transformed into a slurry. In other cases no bubbling occurred and the sand passively melted its way downward into the snow as a wetting front moved upward into the sand. A continuum of behaviors between these two cases was observed. Vigorous bubbling and convection were generally favored by high temperature, small grain size, and small layer thickness. A physically based theory of heat- and mass transfer at the pyroclast/snow interface, developed in Part 1 of this paper, does a good job of explaining the observations as a manifestation of unstable vapor-driven fluidization. The theory, when extrapolated to the behavior of actual, poorly sorted pyroclastic flow sediments, leads to the prediction that the observed 'thermal-scour' phenomenon should also occur for many real pyroclastic flows passing over snow. 'Thermal scour' is therefore likely to be involved in the generation of lahars.

  12. The puzzling units of radioactivity - Part 1

    International Nuclear Information System (INIS)

    Guiraud-Vitaux, F.; Colas-Linhart, N.

    2012-01-01

    The authors explain in a very pedagogical way the figures that were published by IRSN (French Institute for radioprotection and nuclear safety) concerning the radioactive contamination during the Fukushima accident. The figures focus on ground contamination and sea contamination due to Cs-134 and Cs-137 and on the contamination of a staple drink in Japan: tea. It appears that the daily consumption of 1 liter of tea (tea collected the year of the accident or the year after) leads to an efficient radiation dose of 0.1 to 0.2 mSv/y which ranges it in the domain of very low radiation doses. (A.C.)

  13. Helical post stellarator. Part 1: Vacuum configuration

    International Nuclear Information System (INIS)

    Moroz, P.E.

    1997-08-01

    Results on a novel type of stellarator configuration, the Helical Post Stellarator (HPS), are presented. This configuration is different significantly from all previously known stellarators due to its unique geometrical characteristics and unique physical properties. Among those are: the magnetic field has only one toroidal period (M = 1), the plasma has an extremely low aspect ratio, A ∼ 1, and the variation of the magnetic field, B, along field lines features a helical ripple on the inside of the torus. Among the main advantages of a HPS for a fusion program are extremely compact, modular, and simple design compatible with significant rotational transform, large plasma volume, and improved particle transport characteristics

  14. EIA modelling for CZM applications. Part 1

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Babu, M.T.

    stream_size 12 stream_content_type text/plain stream_name Summer_Sch_EIA_Manage_Coast_Zone_2001_84.pdf.txt stream_source_info Summer_Sch_EIA_Manage_Coast_Zone_2001_84.pdf.txt Content-Encoding ISO-8859-1 Content-Type text...

  15. Life span study report 11, part 1

    International Nuclear Information System (INIS)

    Shimizu, Yukiko; Kato, Hiroo; Schull, W.J.; Preston, D.L.; Fujita, Shoichiro; Pierce, D.A.

    1987-11-01

    In 75,991 A-bomb survivors, shielded kerma and organ doses were calculated based on the new dosimetry system 1986 (DS86) and the previous tentative 1965 dose revised (T65DR) to compare risk coefficients for site-specific cancer mortality during the period 1950 - 1985. As for shielded kerma, the excess relative risk over the various sites and the excess numbers of cancer deaths per 10 4 person-year-gray were 1.35 - 1.51 and 1.38 - 1.61 times higher, respectively, under the DS86 than under the T65DR. The attributable risks did not differ in the two dosimetric systems. The risk coefficients based on the DS86 organ-absorbed doses were generally smaller than those based on the T65DR values. The difference in cancer mortality between Hiroshima and Nagasaki was smaller with the DS86 than with the T65DR; however, this was not statistically significant for either shielded kerma and organ-absorbed dose. (Namekawa, K.)

  16. Radiochemical determination of methylmercury chloride Part 1

    International Nuclear Information System (INIS)

    Stary, J.; Prasilova, J.

    1976-01-01

    The isotope exchange between methylmercury species and an excess of inorganic radiomercury in sulphuric acid medium has been used for the simple determination of methylmercury chloride down to 0.01 ppm. The determination is not influenced by the presence of a great excess of other metals, however, chlorides, bromides and iodides interfere in higher concentrations. It has been found that the isotope exchange between CH 3 HgCl and 203 HgCl 4 2- (or 203 HgCl 2 ) in 0.01-3M hydrochloric acid is extremely slow, for the bimolecular reaction the rate constant is lower than 10 -3 mol -1 s -1 at 25 deg C. The isotope exchange rate between methylmercury chloride and mercuric-nitrate 0n on 0.5M sulphuric acid is higher. The isotope exchange is a bimolecular reaction with a rate constant k=0.050+-0.004 mol -1 s -1 at 25 deg C. (T.I.)

  17. The Geometry of the Universe: Part 1

    Science.gov (United States)

    Francis, Stephanie

    2009-01-01

    This article describes how the author carries out an investigation into the geometry of the three possible curvatures of the universe. The author begins the investigation by looking on the web and in books. She found that the general consensus was that there were three different possible curvatures of the universe, namely: (1) flat; (2) positive;…

  18. The Lightcraft Technology Demonstration Program. Part 1

    Science.gov (United States)

    2007-11-01

    Lightcraft that was developed. A wooden model of the Myrabo Lightcraft is shown in Figure 8 with the forebody panels open to expose the solar cells on...HELSTF tests, including new (expendable) mirror faceplates compatible with 3.8 μm lasers, 0.5 Tesla permanent magnets, pressure transducers, data...8 200-9/10 27 132 57 8 ft 10½ in. Same model landed on roof of building 9 200-9/10 27 130 12 8 ft 10½ in. Same model wouldn’t release 10 200-5/6 27

  19. Introduction of organic/hydro-organic matrices in inductively coupled plasma optical emission spectrometry and mass spectrometry: a tutorial review. Part I. Theoretical considerations.

    Science.gov (United States)

    Leclercq, Amélie; Nonell, Anthony; Todolí Torró, José Luis; Bresson, Carole; Vio, Laurent; Vercouter, Thomas; Chartier, Frédéric

    2015-07-23

    Due to their outstanding analytical performances, inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS) are widely used for multi-elemental measurements and also for isotopic characterization in the case of ICP-MS. While most studies are carried out in aqueous matrices, applications involving organic/hydro-organic matrices become increasingly widespread. This kind of matrices is introduced in ICP based instruments when classical "matrix removal" approaches such as acid digestion or extraction procedures cannot be implemented. Due to the physico-chemical properties of organic/hydro-organic matrices and their associated effects on instrumentation and analytical performances, their introduction into ICP sources is particularly challenging and has become a full topic. In this framework, numerous theoretical and phenomenological studies of these effects have been performed in the past, mainly by ICP-OES, while recent literature is more focused on applications and associated instrumental developments. This tutorial review, divided in two parts, explores the rich literature related to the introduction of organic/hydro-organic matrices in ICP-OES and ICP-MS. The present Part I, provides theoretical considerations in connection with the physico-chemical properties of organic/hydro-organic matrices, in order to better understand the induced phenomena. This focal point is divided in four chapters highlighting: (i) the impact of organic/hydro-organic matrices from aerosol generation to atomization/excitation/ionization processes; (ii) the production of carbon molecular constituents and their spatial distribution in the plasma with respect to analytes repartition; (iii) the subsequent modifications of plasma fundamental properties; and (iv) the resulting spectroscopic and non spectroscopic interferences. This first part of this tutorial review is addressed either to beginners or to more experienced scientists who are interested in the

  20. Human genome program report. Part 1, overview and progress

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This report contains Part 1 of a two-part report to reflect research and progress in the U.S. Department of Energy Human Genome Program from 1994 through 1996, with specified updates made just before publication. Part 1 consists of the program overview and report on progress.

  1. Glucocorticoids and fetal programming part 1: Outcomes.

    Science.gov (United States)

    Moisiadis, Vasilis G; Matthews, Stephen G

    2014-07-01

    Fetal development is a critical period for shaping the lifelong health of an individual. However, the fetus is susceptible to internal and external stimuli that can lead to adverse long-term health consequences. Glucocorticoids are an important developmental switch, driving changes in gene regulation that are necessary for normal growth and maturation. The fetal hypothalamic-pituitary-adrenal (HPA) axis is particularly susceptible to long-term programming by glucocorticoids; these effects can persist throughout the life of an organism. Dysfunction of the HPA axis as a result of fetal programming has been associated with impaired brain growth, altered behaviour and increased susceptibility to chronic disease (such as metabolic and cardiovascular disease). Moreover, the effects of glucocorticoid-mediated programming are evident in subsequent generations, and transmission of these changes can occur through both maternal and paternal lineages.

  2. New theoretical development for the calculating of physical properties of D2O

    International Nuclear Information System (INIS)

    Moreira, Osvaldo

    2011-01-01

    In this work we have developed a new method for calculating the physical properties of heavy water, D 2 O, using the Helmholtz free energy state function, A = U − T S, exclusively for this molecule. The state function has been calculated as ā = ā 0 +ā 1 (specific dimensionless values), where ā 0 is related to the properties of heavy water in gaseous state and ā 1 describes the liquid state. The canonical variables of the state function are absolute temperature and volume. To calculate the physical properties defining absolute pressure and temperature, here a variable change method was developed, based on the solution of a differential equation (function ζ) using numerical algorithms (scaling and Newton-Raphson). Physical quantities calculated are: density ϱ(specific volume υ), specific enthalpy h and entropy s. The results obtained agree completely with the values calculated by the National Institute of Standards and Technology (NIST). In this report it has also proposed an adjustment function to calculate the saturation absolute temperature of heavy water as a function of the pressure: T s (p) = exp[a·b(p)], where a is a vector of constant coefficients and b a vector function of pressure, using theoretical values and extending the wording proposed by the Oak Ridge National Laboratory. The new setting has an error less than 0.03%. (author)

  3. Integrative mental health care: from theory to practice, part 1.

    Science.gov (United States)

    Lake, James

    2007-01-01

    Integrative approaches will lead to more accurate and different understandings of mental illness. Beneficial responses to complementary and alternative therapies provide important clues about the phenomenal nature of the human body in space-time and disparate biological, informational, and energetic factors associated with normal and abnormal psychological functioning. The conceptual framework of contemporary Western psychiatry includes multiple theoretical viewpoints, and there is no single best explanatory model of mental illness. Future theories of mental illness causation will not depend exclusively on empirical verification of strictly biological processes but will take into account both classically described biological processes and non-classical models, including complexity theory, resulting in more complete explanations of the characteristics and causes of symptoms and mechanisms of action that result in beneficial responses to treatments. Part 1 of this article examines the limitations of the theory and contemporary clinical methods employed in Western psychiatry and discusses implications of emerging paradigms in physics and the biological sciences for the future of psychiatry. In part 2, a practical methodology for planning integrative assessment and treatment strategies in mental health care is proposed. Using this methodology the integrative management of moderate and severe psychiatric symptoms is reviewed in detail. As the conceptual framework of Western medicine evolves toward an increasingly integrative perspective, novel understandings of complex relationships between biological, informational, and energetic processes associated with normal psychological functioning and mental illness will lead to more effective integrative assessment and treatment strategies addressing the causes or meanings of symptoms at multiple hierarchic levels of body-brain-mind.

  4. X-ray binaries, part 1

    International Nuclear Information System (INIS)

    Hammerschlag-Hensberge, G.C.M.J.

    1977-01-01

    Optical observations of X-ray binaries and their interpretation are described. A number of early-type stars which are identified as companions of X-ray sources are photometrically and spectroscopically observed. The spectra were obtained with the coude spectrograph attached to the 1.5 m telescope of the European Southern Observatory, La Silla, Chile. Registrations of the spectra were made with the Faul-Coradi microphotometer of the Observatory at Utrecht. To study radial velocity variations, the positions of the spectral lines were measured with the Grant comparator of the University of Groningen

  5. Curriculum, Curriculum Development, Curriculum Studies? Problematising Theoretical Ambiguities in Doctoral Theses in the Education Field

    Science.gov (United States)

    du Preez, Petro; Simmonds, Shan

    2014-01-01

    Theoretical ambiguities in curriculum studies result in conceptual mayhem. Accordingly, they hinder the development of the complicated conversation on curriculum as a verb. This article aims to contribute to reconceptualizing curriculum studies as a dynamic social practice that aspires to thinking and acting with intelligences and sensitivity so…

  6. Transactors, Transformers and Beyond. A Multi-Method Development of a Theoretical Typology of Leadership.

    Science.gov (United States)

    Pearce, Craig L.; Sims, Henry P., Jr.; Cox, Jonathan F.; Ball, Gail; Schnell, Eugene; Smith, Ken A.; Trevino, Linda

    2003-01-01

    To extend the transactional-transformational model of leadership, four theoretical behavioral types of leadership were developed based on literature review and data from studies of executive behavior (n=253) and subordinate attitudes (n=208). Confirmatory factor analysis of a third data set (n=702) support the existence of four leadership types:…

  7. A Historical Analysis of Academic Development Using the Theoretical Lens of Pierre Bourdieu

    Science.gov (United States)

    Kloot, Bruce Charles

    2015-01-01

    This paper provides a history of academic development by examining how a South African institution coped with the potent social forces confronting it before the collapse of apartheid. Theoretically, it draws on the framework of Pierre Bourdieu and engages with a paper written a decade ago by Naidoo, who also used Bourdieu to understand…

  8. Comparison of theoretical estimates and experimental measurements of fatigue crack growth under severe thermal shock conditions (part two - theoretical assessment and comparison with experiment)

    International Nuclear Information System (INIS)

    Green, D.; Marsh, D.; Parker, R.

    1984-01-01

    This paper reports the theoretical assessment of cracking which may occur when a severe cycle comprising alternate upshocks and downshocks is applied to an axisymmetric feature with an internal, partial penetration weld and crevice. The experimental observations of cracking are reported separately. A good agreement was noted even though extensive cycle plasticity occurred at the location of cracking. It is concluded that the LEFM solution has correlated with the experiment mainly because of the axisymmetric geometry which allows a large hydrostatic stress to exist at the internal weld crevice end. Thus the stress at the crevice can approach the singular solution required for LEFM correlations without contributing to yielding

  9. Meteorological experiments for emergency preparedness. part 1

    International Nuclear Information System (INIS)

    Leao, I.L.B.; Nicolli, D.

    1993-12-01

    Since the preliminary studies for the Angra dos Reis Nuclear Power Plant (NPP) siting, by an American consultant company, it was verified that the micro scale and mesoscale meteorological conditions in the region show a unique complex pattern, so that no similar nuclear installation site could be found for reference. Therefore, it was recommended to install onsite a correspondingly complex meteorological data acquisition system which comprises a 100-meter tower with instruments at three different levels and three 15-meter satellite towers on the hills around. In this report, are described the equipment and instruments sent by the IAEA to CNEN as well as the procedures and particular computer programming developed by the staff. It is also reported on the bureaucratic problems and meager budget allocation for the Project which delayed the installation of the two meteorological stations and hindered the implementation of the Project. The equipment for the atmospheric boundary layer sounding were used for the first time in September 1993, when CNEN provided some resource for the purchase of gas and batteries. The first atmospheric sounding campaign showed the occurrence of strong night winds and intense thermal inversion at the higher level of the boundary layer, until now unknown by the Brazilian meteorologists. By way of this report, the staff of meteorologists tries to show the status of Project BRA/09/031 and the know-how gained with it. (author)

  10. Petroleum products : part 1 - overview and prospects

    International Nuclear Information System (INIS)

    1996-01-01

    The petroleum products industry represents the downstream (refining and products marketing) portion of the oil industry. It includes companies that refine crude oil into petroleum products, transport them to distribution storage terminals and sell them directly to major users or wholesale and retail outlets. Issues regarding investment and financing, trade and export strategies, technological innovation and adaptation, human resources, the environment and sustainable development within the sector are discussed, illustrating, among other things, how government and industry can commit to mutually beneficial goals and actions. The petroleum industry is a major source of revenue for Canadian governments which collect about $9 billion annually in federal and provincial taxes on gasoline alone. The industry is capital-intensive and very competitive, with a strong domestic focus. Key points relevant to the sector are examined from the global, North American and Canadian perspectives, highlighting changing conditions and industry responses in both the refining and retailing segments of the sector. Growth prospects in terms of profitability and environmental issues were also analyzed. 11 figs

  11. Bariatric Surgery: Bad to the Bone, Part 1.

    Science.gov (United States)

    Pizzorno, Lara

    2016-03-01

    Obesity is now a global epidemic affecting a significant and rapidly increasing number of adults, adolescents, and children. As the incidence of obesity has increased, so has the use of bariatric surgery as a medical solution. A growing number of studies now report that, despite calcium and vitamin D supplementation, the most frequently performed types of bariatric surgery, the Roux-en-Y gastric bypass and the sleeve gastrectomy, cause significant ongoing bone loss. In resources available to the general public and to physicians, this adverse outcome is rarely mentioned or is attributed solely to reduced calcium absorption. Recent studies investigating micronutrient malabsorption and changes in a wide range of hormones induced by bariatric surgery now indicate that calcium malabsorption is the tip of a formidable iceberg. The current article, part 1 of a 2-part series, reviews the latest research findings confirming that obesity prevalence is skyrocketing and that bariatric surgery causes ongoing, accelerated bone loss. Part 1 also discusses the mechanisms through which the bariatric surgery-induced malabsorption of key nutrients adversely affects bone homeostasis. Part 2 discusses the specific changes seen in bone metabolism after bariatric surgery and reviews current data on the underlying mechanisms, in addition to nutrient malabsorption, which are thought to contribute to bariatric surgery-induced ongoing accelerated bone loss. These processes include mechanical unloading and changes in a wide variety of hormones (eg, leptin, adiponectin, testosterone, estradiol, serotonin, ghrelin, glucagon-like peptide 1, and gastric inhibitory peptide). Also, part 2 covers interventions that may help lessen bariatric surgery-induced bone loss, which are now beginning to appear in the medical literature. Bariatric surgery's adverse effects on bone must be widely recognized and protocols developed to prevent early onset osteoporosis in the recipients of an increasingly utilized

  12. Plant and Animal Gravitational Biology. Part 1

    Science.gov (United States)

    1997-01-01

    Session TA2 includes short reports covering: (1) The Interaction of Microgravity and Ethylene on Soybean Growth and Metabolism; (2) Structure and G-Sensitivity of Root Statocytes under Different Mass Acceleration; (3) Extracellular Production of Taxanes on Cell Surfaces in Simulated Microgravity and Hypergravity; (4) Current Problems of Space Cell Phytobiology; (5) Biological Consequences of Microgravity-Induced Alterations in Water Metabolism of Plant Cells; (6) Localization of Calcium Ions in Chlorella Cells Under Clinorotation; (7) Changes of Fatty Acids Content of Plant Cell Plasma Membranes under Altered Gravity; (8) Simulation of Gravity by Non-Symmetrical Vibrations and Ultrasound; and (9) Response to Simulated weightlessness of In Vitro Cultures of Differentiated Epithelial Follicular Cells from Thyroid.

  13. Potassium Capture by Kaolin, Part 1: KOH

    DEFF Research Database (Denmark)

    Wang, Guoliang; Jensen, Peter Arendt; Wu, Hao

    2018-01-01

    -capture level. The effect of reaction temperature,K-concentration in the flue gas, and, thereby, molar ratio of K/(Al+Si) in reactants, gas residence time, and solid particle size on K-capture reaction was systematically investigated. Corresponding equilibrium calculations were conducted with FactSage 7.......0. The experimental results showed that kaolin reached almost full conversion to K-aluminosilicates under suspension-fired conditions at 1100–1450 °C for a residence time of 1.2 s and a particle size of D50 = 5.47 μm. The amount of potassium captured by kaolin generally followed the equilibrium at temperatures above...

  14. Design of pressure vessels. Part 1

    International Nuclear Information System (INIS)

    Grandemange, J.M.

    2008-01-01

    The equipments and loops of PWR reactors are basically pressure vessels. Their specificities concern the integrity warranties that must be implemented considering their importance for the reactors safety. Thus, stress is put on the exhaustiveness of the prevention of in-service degradation and on the safety scenarios considered. The second specificity concerns the possibility of activation of wear and corrosion products during their flow inside the reactor core. This second aspect leads to some constraints on the choice of the materials used and on the surface coating of the inside wall of big components of the primary circuit. The aim of this document is to develop the general approach adopted for the design of the pressure vessels of PWR fluid loops, and to stress more particularly on the nuclear particularities of these equipments. Some extensions of these rules to high temperature resistant materials (FBR-type reactors) are also evoked. Content: General considerations: design basis of pressure vessels, risk analysis and design conditions, ruining paths and safety coefficients; 2 - damage prevention for excessive deformation: definitions, criteria; 3 - prevention of the plastic instability damage: definition, criteria; 4 - buckling prevention: definition and mechanisms, rules and criteria; 5 - prevention of progressive deformation damage: definitions, plastic adaptation, plastic accommodation, progressive deformation; 6 - prevention of fatigue damage: definitions, general prevention approach, design fatigue curves, analytic approach, particular aspects, analysis of zones with geometrical singularity; 7 - prevention of sudden rupture damage: fragile rupture and ductile tear, general approach, analytic criteria, irradiation and aging effects; 8 - other potential damages; 9 - conclusion. (J.S.)

  15. Radioactivity survey data in Japan, part 1

    International Nuclear Information System (INIS)

    1988-04-01

    The report presents data on radioactive substances in environmental materials. Samples collected are rain and dry fallout (monthly for domestic program and monthly for WHO program), airborne dust (quarterly), service water and freshwater (semiyearly for source water, semiyearly for tap water, yearly in fishing season for freshwater), soil (yearly at 1.0 - 5 cm and 5 - 20 cm), sea water (yearly) and sea sediments (yearly). The samples collected are treated appropriately to provide solutions for analysis. Their analysis is carried out as follows. Each sample solution prepared is first neutralized with sodium hydroxide. After sodium carbonate is added, the precipitate of strontium and calcium carbonates is separated and the supernatant solution is used for cesium-137 determination. The carbonates are converted into oxalates, which are then dissolved in nitric acid. Strontium is separated by successive fuming nitric acid separation. The supernatant is acidified and cesium is absorbed on ammonium molybdophosphate added. Stable strontium, calcium and potassium are also determined. After the radiochemical separation, counting of radioactivity is performed using low background beta counters normally for 60 to 90 min. From the results, the concentrations of the nuclides in the original samples are calculated. The contents of the substances in the samples are tabulated. (Nogami, K.)

  16. 44 CFR 1.6 - Ex parte communications.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Ex parte communications. 1.6 Section 1.6 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL RULEMAKING; POLICY AND PROCEDURES General § 1.6 Ex parte communications. In...

  17. 16 CFR Figure 1 to Part 1203 - Anatomical Planes

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Anatomical Planes 1 Figure 1 to Part 1203 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR BICYCLE HELMETS Pt. 1203, Fig. 1 Figure 1 to Part 1203—Anatomical Planes ER10MR98.001 ...

  18. 41 CFR 105-1.000-50 - Scope of part.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Scope of part. 105-1.000-50 Section 105-1.000-50 Public Contracts and Property Management Federal Property Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION 1-INTRODUCTION § 105-1.000-50 Scope of part...

  19. 15 CFR Supplement 1 to Part 732 - Decision Tree

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Decision Tree 1 Supplement 1 to Part 732 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU... THE EAR Pt. 732, Supp. 1 Supplement 1 to Part 732—Decision Tree ER06FE04.000 [69 FR 5687, Feb. 6, 2004] ...

  20. Physiopathology glomerular hyperfiltration in diabetes. Part 1

    Directory of Open Access Journals (Sweden)

    Claudio A. Mascheroni

    2014-09-01

    common therapy measures for HF strict metabolic control, a low-protein diet, and the wide clinical use of IECA or AT1 blockers (not clinically tested for this purpose seem to be added to the new specific inhibitors of the SGLT2 cotransporter, which have shown beneficial effects in several aspects of the diabetic management. There are already some works with specific effect over the HF that seem to be encouraging. There is less experience with the potential use of C-peptide, as a therapeutic tool in these clinical situations. Clearly, defining the mechanisms involved in this complex phenomenon, will allow a better knowledge of it and a better therapeutic approach.

  1. Radiation protection - Performance criteria for radiobioassay. Part 1: General principles

    International Nuclear Information System (INIS)

    2001-01-01

    International Standard ISO 12790-1 was prepared by Technical Committee ISO/TC 85, Nuclear energy, Subcommittee SC 2, Radiation protection. ISO 12790 consists of the following parts, under the general title Radiation protection - Performance criteria for radiobioassay: Part 1: General principles; and Part 2: Rationale and specific applications This part of ISO 12790 provides criteria for quality assurance and control, evaluation of performance and the accreditation of radiobioassay service laboratories. Criteria and guidance for direct radiobioassay ( in vivo) and indirect radiobioassay ( in vitro) are given in separate clauses of this part of ISO 12790. This part of ISO 12790 addresses: a) the accuracy of direct ( in vivo) measurements of activity and quantities of selected important radionuclides in test phantoms and indirect ( in vitro) measurements of activity and quantities of selected important radionuclides in test samples; b) methods for determining the minimum detectable amount; c) minimum testing levels and testing ranges; d) requirements for reporting radiobioassay results by service laboratories; e) quality assurance in service laboratories; f) quality control in service laboratories; g) protocol for reporting test evaluations by service laboratories to the testing laboratory; h) default procedures when the service laboratory customer does not specify the performance criteria. The scope of this part of ISO 12790 does not include: a) detailed radiochemical methods for separating radionuclides from biological samples; b) detailed procedures for in vivo and in vitro radioactivity measurements; c) metabolic data and mathematical models for converting radiobioassay results into absorbed dose and dose equivalent; d) procedures for the preparation and distribution of test samples and phantoms by the testing laboratories. Analytical methods for radiobioassay are not currently standardized, but are available in the literature. Guidance for converting

  2. Primer Part 1-The building blocks of epilepsy genetics.

    Science.gov (United States)

    Helbig, Ingo; Heinzen, Erin L; Mefford, Heather C

    2016-06-01

    This is the first of a two-part primer on the genetics of the epilepsies within the Genetic Literacy Series of the Genetics Commission of the International League Against Epilepsy. In Part 1, we cover the foundations of epilepsy genetics including genetic epidemiology and the range of genetic variants that can affect the risk for developing epilepsy. We discuss various epidemiologic study designs that have been applied to the genetics of the epilepsies including population studies, which provide compelling evidence for a strong genetic contribution in many epilepsies. We discuss genetic risk factors varying in size, frequency, inheritance pattern, effect size, and phenotypic specificity, and provide examples of how genetic risk factors within the various categories increase the risk for epilepsy. We end by highlighting trends in epilepsy genetics including the increasing use of massive parallel sequencing technologies. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

  3. The use of bone age in clinical practice - Part 1

    DEFF Research Database (Denmark)

    Martin, D.D.; Caliebe, J.; Binder, Gitte Sommer

    2011-01-01

    addressed in part 2). Various manual and automatic methods of BA assessment have been developed. Healthy tall children tend to have advanced BA and healthy short children tend to have delayed BA in comparison to chronological age. Growth hormone (GH) treatment of children with GH deficiency leads to a catch......This review examines the role of skeletal maturity ('bone age', BA) assessment in clinical practice. BA is mainly used in children with the following conditions: short stature (addressed in part 1 of this review), tall stature, early or late puberty, and congenital adrenal hyperplasia (all...... of the growth plate to sex steroids, thus further impairing adult height. The assessment of BA provides an important contribution to the diagnostic workup and management of children with short stature....

  4. Developing young adolescents’ self-regulation by means of formative assessment: A theoretical perspective

    OpenAIRE

    Meusen-Beekman, Kelly; Joosten-ten Brinke, Desirée; Boshuizen, Els

    2018-01-01

    Fostering self-regulated learning (SRL) has become increasingly important at various educational levels. Most studies on SRL have been conducted in higher education. The present literature study aims toward understanding self-regulation processes of students in primary and secondary education. We explored the development of young students’ self-regulation from a theoretical perspective. In addition, effective characteristics for an intervention to develop young students’ self-regulation were ...

  5. Investigations in fiscal 1983 on promotion of geothermal development. Part 1. Report on investigation of fumarolic environmental effects in Oku-Aizu area; 1983 nendo chinetsu kaihatsu sokushin chosa. 1. Okuaizu chiiki funkichu kankyo eikyo chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1984-03-01

    As part of the investigations on promotion of geothermal development, surveys have been carried out in the Oku-Aizu area to identify the existence and/or extent of effects of collecting geothermal fluids above the ground imposed on the environment, such as the natural ecological system. The investigated area is an area of 60 km{sup 2} covering Kawanuma County and Onuma County in Fukushima Prefecture, a mountainous area with undulations. The investigation result may be summarized as follows: the area shows the inland climate and has snow fall as much as 2 m in winter; according to the H2S diffusion prediction, the concentration thereof on the land in seasonal average is 0.7 ppm at maximum, which is a value presenting no problems. No fumarolic effects of SO2 were identified, and floating dust and Hg showed values that present no problems. With regard to water quality during and after the blowout test, no effects of blowout return were identified. The noise level was 41 to 45 phones at a place 100 m distant, and the vibration level has become the lower detection limit at a place 50 m distant. Leveling has discovered no ground movement. No variation in major constituents in thermal spring water was verified before and after the blowout test. (NEDO)

  6. A theoretical and (e,2e) experimental investigation into the complete valence electronic structure of (1.1.1) propellane

    Energy Technology Data Exchange (ETDEWEB)

    Adcock, W.; Clark, C.I. [Flinders Univ. of South Australia, Bedford Park, SA (Australia); Brunger, M.J.; McCarthy, I.E. [Flinders Univ. of South Australia, Bedford Park, SA (Australia). School of Physical Sciences; Michalewicz, M.T. [CSIRO, Carlton, VIC (Australia). Division of Information Technology; Von Niessen, W. [Technische Univ., Braunschweig (Germany). Institute fur Physikalische and Theoretische Chemie; Weigold, E. [Australian National Univ., Canberra, ACT (Australia). Inst. of Advanced Studies; Winkler, D.A. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), Clayton, VIC (Australia). Div. of Chemical Physics

    1996-08-01

    The first comprehensive electronic structural study of the complete valence shell of [1.1.1] propellane is reported. Binding energy spectra were measured in the energy regime 3.5-46.5 eV over a range of different target electron momentum so that individual orbital momentum profiles could also be determined. These binding energy spectra were collected using an energy dispersive multichannel electron momentum spectrometer at a total energy of 1000 eV, with a coincidence energy resolution of 1.38 eV and a momentum resolution of about 0.1 a.u. The experimental orbital electron momentum profiles are compared with those calculated in the plane wave impulse approximation (PWIA) using both a triple zeta plus polarisation level SCF wavefunction and a further 13 basis sets as calculated using Density Functional Theory (DFT). A critical comparison between the experimental an theoretical momentum distributions (MDs) allows to determine the optimum wavefunction for [1.1.1]propellane. In general, the level of agreement between the experimental and theoretical MDs for the optimum wavefunction for all of the respective valence orbitals was very good. The determination of this wavefunction then allowed to derive the chemically interesting molecular properties of [1.1.1]propellane. These include infrared spectra, bond lengths, bond orders, electron densities and many others. A summary of these results and a comparison of them with the previous results of other workers is presented with the level of agreement typically being good. In particular, the existence of the C1-C3 bridging bond with a bond order of 0.70 was confirmed. 59 refs., 4 tabs., 11 figs.

  7. Competition between Plant-Populations with Different Rooting Depths. 1. Theoretical Considerations

    NARCIS (Netherlands)

    Berendse, F.

    1979-01-01

    As an extension of De Wit's competition theory a theoretical description has been developed of competition between plant populations with different rooting depths. This model shows that in mixtures of plants with different rooting depths the value of the Relative Yield Total can be expected to

  8. Theoretical Guidelines for the Development of Reading Comprehension Using Metacognitive Strategies

    Directory of Open Access Journals (Sweden)

    Yelitza del Carmen Morillo Terán

    2016-11-01

    Full Text Available The research aims to generate theoretical development of reading comprehension guidance by using metacognitive strategies in the IUTEMBI University Institute of Technology "Mario Briceño Iragorry" located in Valera, Trujillo state. Referential theories will be based on Pujol (2010, Pinzás (2013, among others. For the qualitative development through the phenomenological method supported by hermeneutics that enable understanding of the phenomena in its various manifestations approach is assumed. Key informants will be selected according to criteria of qualitative research, based on the fact that teachers are the aforementioned institution and pledged to voluntarily participate in the research. So they are regarded as informers three teachers and three students of different races that offer this university. For the development of the study will be used as instruments an unstructured interview, audio recordings, that will study in depth analysis units. The findings allow the aforementioned theoretical generating orientations.

  9. Mistral project: identification and parameter adjustment. Theoretical part; Projet Mistral: identification et recalage des modeles. Etude theorique

    Energy Technology Data Exchange (ETDEWEB)

    Faille, D.; Codrons, B.; Gevers, M.

    1996-03-01

    This document belongs to the methodological part of the project MISTRAL, which builds a library of power plant models. The model equations are generally obtained from the first principles. The parameters are actually not always easily calculable (at least accurately) from the dimension data. We are therefore investigating the possibility of automatically adjusting the value of those parameters from experimental data. To do that, we must master the optimization algorithms and the techniques that are analyzing the model structure, like the identifiability theory. (authors). 7 refs., 1 fig., 1 append.

  10. The full-sky relativistic correlation function and power spectrum of galaxy number counts. Part I: theoretical aspects

    Science.gov (United States)

    Tansella, Vittorio; Bonvin, Camille; Durrer, Ruth; Ghosh, Basundhara; Sellentin, Elena

    2018-03-01

    We derive an exact expression for the correlation function in redshift shells including all the relativistic contributions. This expression, which does not rely on the distant-observer or flat-sky approximation, is valid at all scales and includes both local relativistic corrections and integrated contributions, like gravitational lensing. We present two methods to calculate this correlation function, one which makes use of the angular power spectrum Cl(z1,z2) and a second method which evades the costly calculations of the angular power spectra. The correlation function is then used to define the power spectrum as its Fourier transform. In this work theoretical aspects of this procedure are presented, together with quantitative examples. In particular, we show that gravitational lensing modifies the multipoles of the correlation function and of the power spectrum by a few percent at redshift z=1 and by up to 30% and more at z=2. We also point out that large-scale relativistic effects and wide-angle corrections generate contributions of the same order of magnitude and have consequently to be treated in conjunction. These corrections are particularly important at small redshift, z=0.1, where they can reach 10%. This means in particular that a flat-sky treatment of relativistic effects, using for example the power spectrum, is not consistent.

  11. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 5, Part B: Chapter 8, Sections 8.3.1.5 through 8.3.1.17

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-01

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the SOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules.

  12. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 5, Part B: Chapter 8, Sections 8.3.1.5 through 8.3.1.17

    International Nuclear Information System (INIS)

    1988-12-01

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the SOE's Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules

  13. Simulation of engine auxiliary drive V-belt slip motion. Part 1. Development of belt slip model; Engine hoki V belt slip kyodo no simulation. 1. Belt slip model no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    Kurisu, T [Mazda Motor Corp., Hiroshima (Japan)

    1997-10-01

    V-belts are widely used for driving auxiliary components of an engine. Inadequet design of such belt system sometimes results in troubles such as belt squeak, side rubber separation and/or bottom rubber crack. However, there has been no design tools which can predict belt slip quantitatively. The author developed a motion simulation program of Auxiliary Drive V-Belt System considering belt slip. The program showed good prediction accuracy for belt slip motion. This paper describes the simulation model. 1 ref., 12 figs.

  14. Promoting mental wellbeing: developing a theoretically and empirically sound complex intervention.

    Science.gov (United States)

    Millar, S L; Donnelly, M

    2014-06-01

    This paper describes the development of a complex intervention to promote mental wellbeing using the revised framework for developing and evaluating complex interventions produced by the UK Medical Research Council (UKMRC). Application of the first two phases of the framework is described--development and feasibility and piloting. The theoretical case and evidence base were examined analytically to explicate the theoretical and empirical foundations of the intervention. These findings informed the design of a 12-week mental wellbeing promotion programme providing early intervention for people showing signs of mental health difficulties. The programme is based on the theoretical constructs of self-efficacy, self-esteem, purpose in life, resilience and social support and comprises 10 steps. A mixed methods approach was used to conduct a feasibility study with community and voluntary sector service users and in primary care. A significant increase in mental wellbeing was observed following participation in the intervention. Qualitative data corroborated this finding and suggested that the intervention was feasible to deliver and acceptable to participants, facilitators and health professionals. The revised UKMRC framework can be successfully applied to the development of public health interventions. © The Author 2013. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  15. Matrix isolation infrared spectroscopic and theoretical study of 1,1,1-trifluoro-2-chloroethane (HCFC-133a)

    Science.gov (United States)

    Rodrigues, Gessenildo Pereira; Lucena, Juracy Régis; Ventura, Elizete; Andrade do Monte, Silmar; Reva, Igor; Fausto, Rui

    2013-11-01

    The molecular structure and infrared spectrum of the atmospheric pollutant 1,1,1-trifluoro-2-chloroethane (HCFC-133a; CF3CH2Cl) in the ground electronic state were characterized experimentally and theoretically. Excited state calculations (at the CASSCF, MR-CISD, and MR-CISD+Q levels) have also been performed in the range up to ˜9.8 eV. The theoretical calculations show the existence of one (staggered) conformer, which has been identified spectroscopically for the monomeric compound isolated in cryogenic (˜10 K) argon and xenon matrices. The observed infrared spectra of the matrix-isolated HCFC-133a were interpreted with the aid of MP2/aug-cc-pVTZ calculations and normal coordinate analysis, which allowed a detailed assignment of the observed spectra to be carried out, including identification of bands due to different isotopologues (35Cl and 37Cl containing molecules). The calculated energies of the several excited states along with the values of oscillator strengths and previous results obtained for CFCs and HCFCs suggest that the previously reported photolyses of the title compound at 147 and 123.6 nm [T. Ichimura, A. W. Kirk, and E. Tschuikow-Roux, J. Phys. Chem. 81, 1153 (1977)] are likely to be initiated in the n-4s and n-4p Rydberg states, respectively.

  16. Theoretical Physics Division annual report, January--December 1975. Volume 1

    International Nuclear Information System (INIS)

    Wainwright, T.; Tarter, B.

    1976-01-01

    Discussions of theoretical work during this period are reported for the following general areas: (1) atomic, molecular, and nuclear physics, (2) laser fusion, propagation, and effects, (3) pulsed power and plasma physics, (4) energy and the environment, and (5) related research

  17. Electric utility strategies and the emerging industry structure - Part 1

    International Nuclear Information System (INIS)

    Motupalli, S.

    1991-01-01

    The electric utility industry is our most capital intensive industry by far. Over the past few decades, socioeconomic and technological forces have been quietly revolutionizing the way the industry conducts itself. During the 1980s, these changes have been particularly intense, often catching both regulators and regulated ill-prepared to develop effective and profitable strategies to deal with such change. Much has already been written about these changes: independent power producers, competitive procurement of resources, incentive-based regulation, the benefits of affiliated company structures, mergers and consolidation, customer energy conservation, and marketing strategy development are all currently highly popular article and seminar topics. The author's object in this two-part series is to facilitate development of a decision framework to put these various changes in perspective, to help develop effective strategies through better focused and equipped planning methodologies. Gaining an understanding of the role, strengths and weaknesses of the various players in an industry and the structural constraints in which they operate is a necessary precursor to developing effective operating strategies to deal with change or to manipulate industry forces in your favor. Michael Port's popular five forces model provides a convenient way to develop such an understanding. It provides a way to map the industry forces driving profitability, through a review of the strengths, weaknesses and leverage of: current industry players, suppliers to the industry, customers for the industry's product, new entrants into the market, and substitute products providing equal or better value. Part 1 of this series reviews each of these five forces along some key dimensions to determine their direction of change or influence, and whether this change impacts a utility's competitive position favorably or unfavorably

  18. Social existence: between subjective and objective conditions. Impact on the theoretical discussion on development

    Directory of Open Access Journals (Sweden)

    Aura González Serna

    2012-01-01

    Full Text Available This article aims to instill reflections on the theoretical debate around the development. The premise for fixing the analysis is to consider the impact of modes of apprehending social existence, since it is demarcated between subjectivities and objective conditions. Different conceptions appear to interpret and represent the individual and collective imagination. Fragmentation between subjectivity and objectivity, constitute an impediment to understanding the generic nature of being that builds and permanently transformed the social existence.

  19. Government debt management in the euro area - recent theoretical developments and changes in practices

    OpenAIRE

    Guido Wolswijk; Jakob de Haan

    2005-01-01

    This paper reviews recent developments in the management of government debt in the euro area, covering both theoretical and practical aspects. It focuses on key aspects of debt management; the objectives of debt management, its organisation, the maturity of debt, inflation-indexation, currency-denomination, the ownership of debt, and debt issuing and trading practices. Main adjustments include an increase in autonomy of debt management agencies, and a convergence in debt maturities and in deb...

  20. A Balanced Theoretical and Empirical Approach for the Development of a Design Support Tool

    DEFF Research Database (Denmark)

    Jensen, Thomas Aakjær; Hansen, Claus Thorp

    1996-01-01

    The introduction of a new design support system may change the engineering designer's work situation. Therefore, it may not be possible to derive all the functionalities for a design support system from solely empirical studies of manual design work. Alternatively the design support system could ...... system, indicating a proposal for how to balance a theoretical and empirical approach. The result of this research will be utilized in the development of a Designer's Workbench to support the synthesis activity in mechanical design....

  1. Group theoretical and Hamiltonian structures of integrable evolution equations in 1x1 and 2x1 dimensions

    International Nuclear Information System (INIS)

    Konopel'chenko, B.G.

    1983-01-01

    New results in investigation of the group-theoretical and hamiltonian structure of the integrable evolution equations in 1+1 and 2+1 dimensions are briefly reviewed. Main general results, such as the form of integrable equations, Baecklund transfomations, symmetry groups, are turned out to have the same form for different spectral problems. The used generalized AKNS-method (the Ablowitz Kaup, Newell and Segur method) permits to prove that all nonlinear evolution equations considered are hamiltonians. The general condition of effective application of the ACNS mehtod to the concrete spectral problem is the possibility to calculate a recursion operator explicitly. The embedded representation is shown to be a fundamental object connected with different aspects of the inverse scattering problem

  2. 42 CFR 456.1 - Basis and purpose of part.

    Science.gov (United States)

    2010-10-01

    ... admission review) 1902(a)(30)1903(g)(1)(C) 1903(i)(4) Subpart D—Utilization Control: Mental Hospitals... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS UTILIZATION CONTROL General Provisions § 456.1 Basis and purpose of part. (a) This part prescribes requirements concerning control of the utilization of Medicaid services...

  3. Studies of the tautomeric equilibrium of 1,3-thiazolidine-2-thione: Theoretical and experimental approaches

    Energy Technology Data Exchange (ETDEWEB)

    Abbehausen, Camilla; Paiva, Raphael E.F. de [Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970 Campinas, SP (Brazil); Formiga, Andre L.B., E-mail: formiga@iqm.unicamp.br [Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970 Campinas, SP (Brazil); Corbi, Pedro P. [Institute of Chemistry, University of Campinas - UNICAMP, P.O. Box 6154, 13083-970 Campinas, SP (Brazil)

    2012-10-26

    Highlights: Black-Right-Pointing-Pointer Tautomeric equilibrium in solution. Black-Right-Pointing-Pointer Spectroscopic and theoretical studies. Black-Right-Pointing-Pointer UV-Vis theoretical and experimental spectra. Black-Right-Pointing-Pointer {sup 1}H NMR theoretical and experimental spectra. -- Abstract: The tautomeric equilibrium of the thione/thiol forms of 1,3-thiazolidine-2-thione was studied by nuclear magnetic resonance, infrared and ultraviolet-visible spectroscopies. Density functional theory was used to support the experimental data and indicates the predominance of the thione tautomer in the solid state, being in agreement with previously reported crystallographic data. In solution, the tautomeric equilibrium was evaluated using {sup 1}H NMR at different temperatures in four deuterated solvents acetonitrile, dimethylsulfoxide, chloroform and methanol. The equilibrium constants, K = (thiol)/(thione), and free Gibbs energies were obtained by integration of N bonded hydrogen signals at each temperature for each solvent, excluding methanol. The endothermic tautomerization is entropy-driven and the combined effect of solvent and temperature can be used to achieve almost 50% thiol concentrations in solution. The nature of the electronic transitions was investigated theoretically and the assignment of the bands was made using time-dependent DFT as well as the influence of solvent on the energy of the most important bands of the spectra.

  4. Model Development for Auto Spare Parts Inventory Control and ...

    African Journals Online (AJOL)

    2012-12-01

    Dec 1, 2012 ... essential motivating factors for providing control in manufacturing companies has never showed any sign ... The management of these parts can only be done with the aid of a computer; ... perform a discrete event simulation of.

  5. Theoretical development and first-principles analysis of strongly correlated systems

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chen [Iowa State Univ., Ames, IA (United States)

    2016-12-17

    A variety of quantum many-body methods have been developed for studying the strongly correlated electron systems. We have also proposed a computationally efficient and accurate approach, named the correlation matrix renormalization (CMR) method, to address the challenges. The initial implementation of the CMR method is designed for molecules which have theoretical advantages, including small size of system, manifest mechanism and strongly correlation effect such as bond breaking process. The theoretic development and benchmark tests of the CMR method are included in this thesis. Meanwhile, ground state total energy is the most important property of electronic calculations. We also investigated an alternative approach to calculate the total energy, and extended this method for magnetic anisotropy energy (MAE) of ferromagnetic materials. In addition, another theoretical tool, dynamical mean- field theory (DMFT) on top of the DFT , has also been used in electronic structure calculations for an Iridium oxide to study the phase transition, which results from an interplay of the d electrons' internal degrees of freedom.

  6. Theoretical Aspects of Developing the Ideological Platform for Reforming the Economy of Regions of Ukraine

    Directory of Open Access Journals (Sweden)

    Bielikova Nadiya V.

    2016-01-01

    Full Text Available The article is concerned with developing the ideological platform for reforming the economy of regions of Ukraine on the basis of theories, conceptions, approaches and methods of research of regularities in the economic development of countries and their regions. The article substantiates both theoretical basis and methodological support for developing a economic reforming mechanism; expediency of use as to certain economic theories as well as quantitative and qualitative research methods as to reforming the economy of country and its regions. Requirements for development of the ideological platform of reforming the economy of the country's regions have been defined. The article considers achievements of philosophical disciplines that form the basis for developing of the ideological platform of economic reforming: philosophical anthropology (existentialism as doctrine about the human nature (essence; social theory and the institutional theory, developed on the basis of the latter; philosophy of economics; conceptions and ideas of the philosophy of history. The theoretical basis of studying the economic reforming in Ukraine and its regions has been substantiated, which consists of the following components: reforming the model of country's economy as a whole; reforming the model of a particular region's economy; reforming the model of region's economy as a component of the national economy; reforming the model of economy of country and its regions.

  7. [Self-Determination in Medical Rehabilitation - Development of a Conceptual Model for Further Theoretical Discussion].

    Science.gov (United States)

    Senin, Tatjana; Meyer, Thorsten

    2018-01-22

    Aim was to gather theoretical knowledge about self-determination and to develop a conceptual model for medical rehabilitation- which serves as a basis for discussion. We performed a literature research in electronic databases. Various theories and research results were adopted and transferred to the context of medical rehabilitation and into a conceptual model. The conceptual model of self-determination reflects on a continuum which forms of self-determination may be present in situations of medical rehabilitation treatments. The location on the continuum depends theoretically on the manifestation of certain internal and external factors that may influence each other. The model provides a first conceptualization of self-determination focusing on medical rehabilitation which should be further refined and tested empirically. © Georg Thieme Verlag KG Stuttgart · New York.

  8. Confident but not theoretically grounded – experienced simulation educators’ perceptions of their own professional development

    Directory of Open Access Journals (Sweden)

    Allvin R

    2017-01-01

    Full Text Available Renée Allvin,1 Magnus Berndtzon,2 Liisa Carlzon,3 Samuel Edelbring,4,5 Håkan Hult,6 Magnus Hultin,7 Klas Karlgren,5,8 Italo Masiello,9 Marie-Louise Södersved Källestedt,10 Éva Tamás,11 1Clinical Skills Centre, Faculty of Medicine and Health, School of Medical Sciences, Örebro University, Örebro, 2Metodikum – Skill Centre of Medical Simulation Region County Jönköping, Jönköping, 3Simulation Centre West, Department of Research, Education and Development, Sahlgrenska University Hospital, Gothenburg, 4Department of Medical and Health Sciences, Faculty of Medicine and Health Sciences, Linköping University, Linköping, 5Department of Learning, Informatics, Management and Ethics, Karolinska Institutet, Stockholm, 6Institute of Medicine and Health, Medical Faculty, Linköping University, Linköping, 7Department of Surgical and Perioperative Sciences, Anaesthesiology and Intensive Care, Medical Faculty, Umeå University, Umeå, 8Department of Research, Education and Development and Innovation, Södersjukhuset Hospital, Stockholm, 9Department of Clinical Science and Education, Karolinska Institutet, Södersjukhuset Hospital, Stockholm, 10Clinical Skills Centre, Centre for Clinical Research, Uppsala University, Västerås, 11Department of Cardiovascular Diseases, Institute of Medicine and Health, Medical Faculty, University of Linköping, Linköping, Sweden Background: Medical simulation enables the design of learning activities for competency areas (eg, communication and leadership identified as crucial for future health care professionals. Simulation educators and medical teachers follow different career paths, and their education backgrounds and teaching contexts may be very different in a simulation setting. Although they have a key role in facilitating learning, information on the continuing professional development (pedagogical development of simulation educators is not available in the literature. Objectives: To explore changes in

  9. EVOLUTION AND TRENDS IN EDUCATIONAL MARKETING DEVELOPMENT: THEORETICAL AND METHODOLOGICAL ASPECTS

    Directory of Open Access Journals (Sweden)

    Ecaterina ŞIŞCAN

    2016-03-01

    Full Text Available The development of the knowledge-based economy, society computerization, globalization and regionalization processes, enhanced dynamics of labor markets, increased competition in the market for higher education etc. have generated profound changes at the level of universities in order to increase their competitiveness both domestically and internationally. These changes require the need for a new way of thinking and designing the activity of higher education institutions based on marketing principles. This article contains a theoretical approach to the concept of educational marketing through the development of marketing theories and models.

  10. Merged ontology for engineering design: Contrasting empirical and theoretical approaches to develop engineering ontologies

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Storga, M

    2009-01-01

    to developing the ontology engineering design integrated taxonomies (EDIT) with a theoretical approach in which concepts and relations are elicited from engineering design theories ontology (DO) The limitations and advantages of each approach are discussed. The research methodology adopted is to map......This paper presents a comparison of two previous and separate efforts to develop an ontology in the engineering design domain, together with an ontology proposal from which ontologies for a specific application may be derived. The research contrasts an empirical, user-centered approach...

  11. Impact simulation of liquid-filled containers including fluid-structure interaction--Part 1: Theory

    International Nuclear Information System (INIS)

    Sauve, R.G.; Morandin, G.D.; Nadeau, E.

    1993-01-01

    In a number of applications, the hydrodynamic effect of a fluid must be included in the structural evaluation of liquid-filled vessels undergoing transient loading. Prime examples are liquid radioactive waste transportation packages. These packages must demonstrate the ability to withstand severe accidental impact scenarios. A hydrodynamic model of the fluid is developed using a finite element discretization of the momentum equations for a three-dimensional continuum. An inviscid fluid model with an isotropic stress state is considered. A barotropic equation of state, relating volumetric strain to pressure, is used to characterize the fluid behavior. The formulation considers the continuum as a compressible medium only, so that no tension fields are permitted. The numerical technique is incorporated into the existing general-purpose three-dimensional structural computer code H3DMAP. Part 1 of the paper describes the theory and implementation along with comparisons with classical theory. Part 2 describes the experimental validations of the theoretical approach. Excellent correlation between predicted and experimental results is obtained

  12. Theoretical and experimental investigations of thickness- stretch modes in 1-3 piezoelectric composites

    International Nuclear Information System (INIS)

    Yang, Z T; Zeng, D P; He, M; Wang, H

    2015-01-01

    Bulk piezoelectric ceramics operating in thickness-stretch (TSt) modes have been widely used in acoustic-related devices. However, the fundamental TSt waves are always coupled with other modes, and the occurrence of these spurious modes in bulk piezoelectric ceramics affects its performance. To suppress the spurious modes, 1-3 piezoelectric composites are promising candidates. However, theoretical modeling of multiphase ceramic composite objects is very complex. In this study, a 1-3 piezoelectric composite sample and a bulk piezoelectric sample are fabricated. The electrical impedance of these two samples are compared. A simple analytical TSt vibration mode from the three dimensional equations of linear piezoelectricity is used to model the performance of 1-3 piezoelectric composites. The theoretical results agree well with the experimental results. (paper)

  13. Region innovation and investment development: conceptual theoretical approach and business solutions

    Directory of Open Access Journals (Sweden)

    Zozulya D.M.

    2017-01-01

    Full Text Available The article describes essential problems of the region business innovation and investment development under current conditions, issues of crisis restrictions negotiation and innovation-driven economy formation. The relevance of the research is defined by the need of effective tools creation for business innovation and investment development and support, which can be applied, first, to increase efficiency of the region industrial activity, then improve production competitiveness on the innovative basis, overcome existing problems and provide sustainable innovation development in the region. The results of conducted research are represented in the article including region innovation and investment development concept model made up by the authors on the basis of system theoretical approach. The tools of the region innovation development defined in the concept model are briefly reviewed in the article. The most important of them include engineering marketing (marketing of scientific and technical innovations, strategic planning, benchmarking, place marketing and business process modeling.

  14. Developing young adolescents’ self-regulation by means of formative assessment: A theoretical perspective

    Directory of Open Access Journals (Sweden)

    Kelly D. Meusen-Beekman

    2015-12-01

    Full Text Available Fostering self-regulated learning (SRL has become increasingly important at various educational levels. Most studies on SRL have been conducted in higher education. The present literature study aims toward understanding self-regulation processes of students in primary and secondary education. We explored the development of young students’ self-regulation from a theoretical perspective. In addition, effective characteristics for an intervention to develop young students’ self-regulation were examined, as well as the possibilities of implementing formative assessments in primary education to develop self-regulation. The results show that SRL can be supported in both primary and secondary education. However, at both school levels, differences were found, regarding the theoretical background of the training and the type of instructed strategy. Studies so far suggest avenues toward formative assessment, which seems to be a unifying theory of instruction that improves the learning process by developing self-regulation among students. But gaps in knowledge about the impact of formative assessments on the development of SRL strategies among primary school students require further exploration.

  15. The effects of evidence bounds on decision-making: theoretical and empirical developments

    Directory of Open Access Journals (Sweden)

    Jiaxiang eZhang

    2012-08-01

    Full Text Available Converging findings from behavioral, neurophysiological and neuroimaging studies suggest an integration-to-boundary mechanism governing decision formation and choice selection. This mechanism is supported by sequential sampling models of choice decisions, which can implement statistically optimal decision strategies for selecting between multiple alternative options on the basis of sensory evidence. This review focuses on recent developments in understanding the evidence boundary, an important component of decision-making raised by experimental findings and models. The article starts by reviewing the neurobiology of perceptual decisions and several influential sequential sampling models, in particular the drift-diffusion model, the Ornstein-Uhlenbeck model and the leaky-competing-accumulator model. In the second part, the article examines how the boundary may affect a model’s dynamics and performance and to what extent it may improve a model’s fits to experimental data. In the third part, the article examines recent findings that support the presence and site of boundaries in the brain. The article considers two questions: 1 whether the boundary is a spontaneous property of neural integrators, or is controlled by dedicated neural circuits; 2 if the boundary is variable, what could be the driving factors behind boundary changes? The review brings together studies using different experimental methods in seeking answers to these questions, highlights psychological and physiological factors that may be associated with the boundary and its changes, and further considers the evidence boundary as a generic mechanism to guide complex behavior.

  16. 17 CFR 289.1 - Applicability of this part.

    Science.gov (United States)

    2010-04-01

    ... CORPORATION ACT § 289.1 Applicability of this part. This part (Regulation IFC) prescribes the reports to be filed with the Securities and Exchange Commission by the International Finance Corporation (“IFC”) pursuant to section 13(a) of the International Finance Corporation Act. ...

  17. Dynamics of Chemical and Charge Transfer Reactions of Molecular Dications: Part V. An Experimental and Theoretical Study of Reactions between CHCl2+ and Ar, Kr and Xe

    Czech Academy of Sciences Publication Activity Database

    Roithová, Jana; Žabka, Ján; Thissen, R.; Herman, Zdeněk

    2003-01-01

    Roč. 5, - (2003), s. 2988-2995 ISSN 1463-9076 R&D Projects: GA ČR GA203/00/0632; GA AV ČR KJB4040302 Grant - others:Konktakt Barrande(XE) 2002-013-1 Institutional research plan: CEZ:AV0Z4040901 Keywords : charge-transfer * experimental and theoretical study * molecular dications Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.959, year: 2003

  18. Preliminary Findings in the Development of a Theoretical Framework for Investigating ICT Integration in Teacher Education

    Directory of Open Access Journals (Sweden)

    Suthagar Narasuman

    2012-06-01

    Full Text Available The following report is the result of a preliminary investigation in the development of a theoretical framework for investigating ICT integration, particularly in TESL (Teaching of English as a Second Language teacher training. The study is primarily an empirical effort to develop a theoretical framework for investigating ICT integration in TESL teacher training. In identifying the predictive variables for the framework, the researchers conducted an intensive review of the literature which included a review of various models used in studies on ICT integration. The contributing variables identified in the present study were age, gender, experience, ICT proficiency, attitude, access to ICT infrastructure, support services, and exposure to ICT professional development programmes. In developing the framework, the study sought to determine the extent to which the observed variability in ICT integration could be predicted by these factors. The sample comprised 266 respondents working at the faculty or English Language Unit in various teacher training institutions across the country. The study predominantly employed quantitative methods of data collection. Interview data was used to corroborate information derived from the survey data.

  19. The theoretical and political framing of the population factor in development.

    Science.gov (United States)

    Campbell, Martha; Bedford, Kathleen

    2009-10-27

    The silence about population growth in recent decades has hindered the ability of those concerned with ecological change, resource scarcity, health and educational systems, national security, and other global challenges to look with maximum objectivity at the problems they confront. Two central questions about population--(1) is population growth a problem? and (2) what causes fertility decline?--are often intertwined; if people think the second question implies possible coercion, or fear of upsetting cultures, they can be reluctant to talk about the first. The classic and economic theories explaining the demographic transition assume that couples want many children and they make decisions to have a smaller family when some socio-economic change occurs. However, there are numerous anomalies to this explanation. This paper suggests that the societal changes are neither necessary nor sufficient for family size to fall. Many barriers of non-evidence-based restrictive medical rules, cost, misinformation and social traditions exist between women and the fertility regulation methods and correct information they need to manage their family size. When these barriers are reduced, birth rates tend to decline. Many of the barriers reflect a patriarchal desire to control women, which can be largely explained by evolutionary biology. The theoretical explanations of fertility should (i) attach more weight to the many barriers to voluntary fertility regulation, (ii) recognize that a latent desire to control fertility may be far more prevalent among women than previously understood, and (iii) appreciate that women implicitly and rationally make benefit-cost analyses based on the information they have, wanting modern family planning only after they understand it is a safe option. Once it is understood that fertility can be lowered by purely voluntary means, comfort with talking about the population factor in development will rise.

  20. Cognitive models of executive functions development: methodological limitations and theoretical challenges

    Directory of Open Access Journals (Sweden)

    Florencia Stelzer

    2014-01-01

    Full Text Available Executive functions (EF have been defined as a series of higher-order cognitive processes which allow the control of thought, behavior and affection according to the achievement of a goal. Such processes present a lengthy postnatal development which matures completely by the end of adolescence. In this article we make a review of some of the main models of EF development during childhood. The aim of this work is to describe the state of the art related to the topic, identifying the main theoretical difficulties and methodological limitations associated with the different proposed paradigms. Finally, some suggestions are given to cope with such difficulties, emphasizing that the development of an ontology of EF could be a viable alternative to counter them. We believe that futture researches should guide their efforts toward the development of that ontology.

  1. Research in theoretical elementary-particle physics. Progress report, March 1, 1981-February 28, 1983

    International Nuclear Information System (INIS)

    Field, R.D.; Ramond, P.M.; Thorn, C.B.

    1982-01-01

    The first two years of operation of the Theoretical Particle Physics group at the University of Florida are discussed. At present our group consists of three full professors, one assistant professor, one DOE Outstanding Junior Instructor, three post-docs and one graduate student. The group has been very productive during the first two years of its existence resulting in the publication of over 30 papers covering a broad range of topics in theoretical high energy physics. In addition, members of our group have traveled and given important talks at national and international physics conferences. The research we have accomplished in such subjects as quantum field theory, quantum chromodynamics, and grand unified theories has increased mankind's understanding of elementary particle physics. It is the intention of our group to continue to actively participate in the further development of high energy physics

  2. Fundamentals of Physics, Part 1 (Chapters 1-11)

    Science.gov (United States)

    Halliday, David; Resnick, Robert; Walker, Jearl

    2003-12-01

    Chapter 1.Measurement. How does the appearance of a new type of cloud signal changes in Earth's atmosphere? 1-1 What Is Physics? 1-2 Measuring Things. 1-3 The International System of Units. 1-4 Changing Units. 1-5 Length. 1-6 Time. 1-7 Mass. Review & Summary. Problems. Chapter 2.Motion Along a Straight Line. What causes whiplash injury in rear-end collisions of cars? 2-1 What Is Physics? 2-2 Motion. 2-3 Position and Displacement. 2-4 Average Velocity and Average Speed. 2-5 Instantaneous Velocity and Speed. 2-6 Acceleration. 2-7 Constant Acceleration: A Special Case. 2-8 Another Look at Constant Acceleration. 2-9 Free-Fall Acceleration. 2-10 Graphical Integration in Motion Analysis. Review & Summary. Questions. Problems. Chapter 3.Vectors. How does an ant know the way home with no guiding clues on the deser t plains? 3-2 Vectors and Scalars. 3-3 Adding Vectors Geometrically. 3-4 Components of Vectors. 3-5 Unit Vectors. 3-6 Adding Vectors by Components. 3-7 Vectors and the Laws of Physics. 3-8 Multiplying Vectors. Review & Summary. Questions. Problems. Chapter 4.Motion in Two and Three Dimensions. In a motorcycle jump for record distance, where does the jumper put the second ramp? 4-1 What Is Physics? 4-2 Position and Displacement. 4-3 Average Velocity and Instantaneous Velocity. 4-4 Average Acceleration and Instantaneous Acceleration. 4-5 Projectile Motion. 4-6 Projectile Motion Analyzed. 4-7 Uniform Circular Motion. 4-8 Relative Motion in One Dimension. 4-9 Relative Motion in Two Dimensions. Review & Summary. Questions. Problems. Chapter 5.Force and Motion-I. When a pilot takes off from an aircraft carrier, what causes the compulsion to fly the plane into the ocean? 5-1 What Is Physics? 5-2 Newtonian Mechanics. 5-3 Newton's First Law. 5-4 Force. 5-5 Mass. 5-6 Newton's Second Law. 5-7 Some Particular Forces. 5-8 Newton's Third Law. 5-9 Applying Newton's Laws. Review & Summary. Questions. Problems. Chapter 6.Force and Motion-II. Can a Grand Prix race car be driven

  3. Serbo-Croatian Workbook. Phase 1. Part 1A,

    Science.gov (United States)

    1983-10-25

    1 PRACTICE OF NOUN GENDERS * Determine the gender of the following nouns: kiupa zadruga junak me so zora novac stolica voce jastuk Pismo izvinjenje...tamo? (povrce i voce ) 7. Da li ste napisali ?___________________________ (pismo, zadatak, knjiga) 71 8. Koga niste videli? (majka, otac, sin, moji

  4. Development and Validation of a Theoretical Test in Endosonography for Pulmonary Diseases

    DEFF Research Database (Denmark)

    Savran, Mona M; Clementsen, Paul Frost; Annema, Jouke T

    2014-01-01

    evidence for this test. METHODS: Initially, 78 questions were constructed after informal conversational interviews with 4 international experts in endosonography. The clarity and content validity of the questions were tested using a Delphi-like approach. Construct validity was explored by administering......BACKGROUND: Theoretical testing provides the necessary foundation to perform technical skills. Additionally, testing improves the retention of knowledge. OBJECTIVES: The aims of this study were to develop a multiple-choice test in endosonography for pulmonary diseases and to gather validity...... consistently than the novices (p = 0.037) and the intermediates (p Validity evidence was gathered, and the test demonstrated content and construct validity....

  5. Theoretical Substantiation of Formation of Integration Forms of Interaction of Enterprises when Developing the Innovation Policy

    Directory of Open Access Journals (Sweden)

    Manoylenko Oleksandr V.

    2014-01-01

    Full Text Available The article considers issues, connected with activation of innovation activity of engineering enterprises on the basis of application of integration forms of interaction. It justifies a necessity of formation of infrastructure of interaction of an enterprise when introducing innovation models of development with consideration of realisation of goals of all interested parties. The article offers a generalised scheme of organisational interaction of an enterprise in external environment and a matrix of functional provision of the integration process. The theoretical approach that is considered in the article allows increase of innovation activity of engineering enterprises and minimisation of expenditures of own resources when realising innovation policy of an enterprise.

  6. Theoretical morphology and development of flight feather vane asymmetry with experimental tests in parrots.

    Science.gov (United States)

    Feo, Teresa J; Prum, Richard O

    2014-06-01

    Asymmetry in flight feather vane width is a major functional innovation associated with the evolution of flight in the ancestors of birds. However, the developmental and morphological basis of feather shape is not simple, and the developmental processes involved in vane width asymmetry are poorly understood. We present a theoretical model of feather morphology and development that describes the possible ways to modify feather development and produce vane asymmetry. Our model finds that the theoretical morphospace of feather shape is redundant, and that many different combinations of parameters could be responsible for vane asymmetry in a given feather. Next, we empirically measured morphological and developmental model parameters in asymmetric and symmetric feathers from two species of parrots to identify which combinations of parameters create vane asymmetry in real feathers. We found that both longer barbs, and larger barb angles in the relatively wider trailing vane drove asymmetry in tail feathers. Developmentally, longer barbs were the result of an offset of the radial position of the new barb locus, whereas larger barb angles were produced by differential expansion of barbs as the feather unfurls from the tubular feather germ. In contrast, the helical angle of barb ridge development did not contribute to vane asymmetry and could be indicative of a constraint. This research provides the first comprehensive description of both the morphological and developmental modifications responsible for vane asymmetry within real feathers, and identifies key steps that must have occurred during the evolution of vane asymmetry. © 2014 Wiley Periodicals, Inc.

  7. Obesity in sub-Saharan Africa: development of an ecological theoretical framework.

    Science.gov (United States)

    Scott, Alison; Ejikeme, Chinwe Stella; Clottey, Emmanuel Nii; Thomas, Joy Goens

    2013-03-01

    The prevalence of overweight and obesity is increasing in sub-Saharan Africa (SSA). There is a need for theoretical frameworks to catalyze further research and to inform the development of multi-level, context-appropriate interventions. In this commentary, we propose a preliminary ecological theoretical framework to conceptualize factors that contribute to increases in overweight and obesity in SSA. The framework is based on a Causality Continuum model [Coreil et al. Social and Behavioral Foundations of Public Health. Sage Publications, Thousand Oaks] that considers distant, intermediate and proximate influences. The influences incorporated in the model include globalization and urbanization as distant factors; occupation, social relationships, built environment and cultural perceptions of weight as intermediate factors and caloric intake, physical inactivity and genetics as proximate factors. The model illustrates the interaction of factors along a continuum, from the individual to the global marketplace, in shaping trends in overweight and obesity in SSA. The framework will be presented, each influence elucidated and implications for research and intervention development discussed. There is a tremendous need for further research on obesity in SSA. An improved evidence base will serve to validate and develop the proposed framework further.

  8. Converging Paradigms: A Reflection on Parallel Theoretical Developments in Psychoanalytic Metapsychology and Empirical Dream Research.

    Science.gov (United States)

    Schmelowszky, Ágoston

    2016-08-01

    In the last decades one can perceive a striking parallelism between the shifting perspective of leading representatives of empirical dream research concerning their conceptualization of dreaming and the paradigm shift within clinically based psychoanalytic metapsychology with respect to its theory on the significance of dreaming. In metapsychology, dreaming becomes more and more a central metaphor of mental functioning in general. The theories of Klein, Bion, and Matte-Blanco can be considered as milestones of this paradigm shift. In empirical dream research, the competing theories of Hobson and of Solms respectively argued for and against the meaningfulness of the dream-work in the functioning of the mind. In the meantime, empirical data coming from various sources seemed to prove the significance of dream consciousness for the development and maintenance of adaptive waking consciousness. Metapsychological speculations and hypotheses based on empirical research data seem to point in the same direction, promising for contemporary psychoanalytic practice a more secure theoretical base. In this paper the author brings together these diverse theoretical developments and presents conclusions regarding psychoanalytic theory and technique, as well as proposing an outline of an empirical research plan for testing the specificity of psychoanalysis in developing dream formation.

  9. A theoretical cost optimization model of reused flowback distribution network of regional shale gas development

    International Nuclear Information System (INIS)

    Li, Huajiao; An, Haizhong; Fang, Wei; Jiang, Meng

    2017-01-01

    The logistical issues surrounding the timing and transport of flowback generated by each shale gas well to the next is a big challenge. Due to more and more flowback being stored temporarily near the shale gas well and reused in the shale gas development, both transportation cost and storage cost are the heavy burden for the developers. This research proposed a theoretical cost optimization model to get the optimal flowback distribution solution for regional multi shale gas wells in a holistic perspective. Then, we used some empirical data of Marcellus Shale to do the empirical study. In addition, we compared the optimal flowback distribution solution by considering both the transportation cost and storage cost with the flowback distribution solution which only minimized the transportation cost or only minimized the storage cost. - Highlights: • A theoretical cost optimization model to get optimal flowback distribution solution. • An empirical study using the shale gas data in Bradford County of Marcellus Shale. • Visualization of optimal flowback distribution solutions under different scenarios. • Transportation cost is a more important factor for reducing the cost. • Help the developers to cut the storage and transportation cost of reusing flowback.

  10. Analysis of industry-generated data. Part 1: a baseline for the development of a tool to assist the milk industry in designing sampling plans for controlling aflatoxin M1 in milk.

    Science.gov (United States)

    Trevisani, Marcello; Farkas, Zsuzsa; Serraino, Andrea; Zambrini, Angelo Vittorio; Pizzamiglio, Valentina; Giacometti, Federica; Ámbrus, Arpád

    2014-01-01

    The presence of aflatoxin M1 (AFM1) in milk was assessed in Italy in the framework of designing a monitoring plan actuated by the milk industry in the period 2005-10. Overall, 21,969 samples were taken from tankers collecting milk from 690 dairy farms. The milk samples were representative of the consignments of co-mingled milk received from multiple (two to six) farms. Systematic, biweekly sampling of consignments involved each of the 121 districts (70 in the North, 17 in the Central and 34 in the South regions of Italy). AFM1 concentration was measured using an enzyme-linked immunoassay method (validated within the range of 5-100 ng kg(-1)) whereas an HPLC method was used for the quantification of levels in the samples that had concentrations higher than 100 ng kg(-1). Process control charts using data collected in three processing plants illustrate, as an example, the seasonal variation of the contamination. The mean concentration of AFM1 was in the range between 11 and 19 ng kg(-1). The 90th and 99th percentile values were 19-34 and 41-91 ng kg(-1), respectively, and values as high as 280 ng kg(-1) were reached in 2008. The number of non-compliant consignments (those with an AFM1 concentration above the statutory limit of 50 ng kg(-1)) varied between 0.3% and 3.1% per year, with peaks in September, after the maize harvest season. The variability between different regions was not significant. The results show that controlling the aflatoxins in feed at farm level was inadequate, consequently screening of raw milk prior to processing was needed. The evaluation of the AFM1 contamination level observed during a long-term period can provide useful data for defining the frequency of sampling.

  11. Contingent and Marginalised? Academic Development and Part-Time Teachers

    Science.gov (United States)

    Anderson, Valerie

    2007-01-01

    Academics employed on non-standard contracts are a numerically significant part of the labour market in higher education. Concerns about access to formal academic development for this staff group have been articulated in many countries in the context of increasing emphasis on teaching quality assessment and employment regulation of…

  12. 19 CFR 210.1 - Applicability of part.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 210.1 Section 210.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE..., and 1337) and sections 2 and 1342(d)(1)(B) of the Omnibus Trade and Competitiveness Act of 1988, Pub...

  13. RECENT DEVELOPMENTS OF THE FINANCIAL REPORTING MODEL: THEORETICAL STUDIES IN REVIEW

    Directory of Open Access Journals (Sweden)

    Bonaci Carmen Giorgiana

    2011-07-01

    Full Text Available Our paper analyzes the manner in which the financial reporting model evolved towards fair value accounting. After a brief introduction into the context of financial reporting at international level, the analysis focuses on the accounting model of fair value. This is done by synthesizing main studies in accounting research literature that analyze fair value accounting through a theoretical approach. The analysis being developed relies on literature review methodology. The main purpose of the developed analysis is to synthesize main pros and cons as being documented through accounting research literature. Our findings underline both the advantages and shortcomings of fair value accounting and of the recent mixed attribute in nowadays financial reporting practices. The concluding remarks synthesize the obtained results and possible future developments of our analysis.

  14. Development of a theoretical model for measuring the perceived value of social responsibility of IPEN

    Energy Technology Data Exchange (ETDEWEB)

    Mutarelli, Rita de Cassia; Lima, Ana Cecilia de Souza; Sabundjian, Gaiane, E-mail: rmutarelli@gmail.com, E-mail: aclima@ipen.br, E-mail: gdjian@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Social responsibility has been one of the great discussions in institutional management, and that is an important variable in the strategy and performance of the institutions. The Instituto de Pesquisas Energeticas e Nucleares (IPEN) has worked for the development of environmental and social issues, converging mainly to the benefit of the population. The theory that guides the social responsibility practices is always difficult to measure for several reasons. One reason for this difficulty is that social responsibility involves a variety of issues that are converted in rights, obligations and expectations of different audiences that could be internal and external to the organization. In addition, the different understanding of the institutions about social and environmental issues is another source of complexity. Based on the study context including: the topic being researched, the chosen institute and the questions resulting from the research, the aim of this paper is to propose a theoretical model to describe and analyze the social responsibility of IPEN. The main contribution of this study is to develop a model that integrates the dimensions of social responsibility. These dimensions - also called constructs - are composed of indexes and indicators that were previously used in various contexts of empirical research, combined with the theoretical and conceptual review of social responsibility. The construction of the proposed theoretical model was based on the research of various methodologies and various indicators for measuring social responsibility. This model was statistically tested, analyzed, adjusted, and the end result is a consistent model to measure the perceived value of social responsibility of IPEN. This work could also be applied to other institutions. Moreover, it may be improved and become a tool that will serve as a thermometer to measure social and environmental issues, and will support decision making in various management processes. (author)

  15. Development of a theoretical model for measuring the perceived value of social responsibility of IPEN

    International Nuclear Information System (INIS)

    Mutarelli, Rita de Cassia; Lima, Ana Cecilia de Souza; Sabundjian, Gaiane

    2015-01-01

    Social responsibility has been one of the great discussions in institutional management, and that is an important variable in the strategy and performance of the institutions. The Instituto de Pesquisas Energeticas e Nucleares (IPEN) has worked for the development of environmental and social issues, converging mainly to the benefit of the population. The theory that guides the social responsibility practices is always difficult to measure for several reasons. One reason for this difficulty is that social responsibility involves a variety of issues that are converted in rights, obligations and expectations of different audiences that could be internal and external to the organization. In addition, the different understanding of the institutions about social and environmental issues is another source of complexity. Based on the study context including: the topic being researched, the chosen institute and the questions resulting from the research, the aim of this paper is to propose a theoretical model to describe and analyze the social responsibility of IPEN. The main contribution of this study is to develop a model that integrates the dimensions of social responsibility. These dimensions - also called constructs - are composed of indexes and indicators that were previously used in various contexts of empirical research, combined with the theoretical and conceptual review of social responsibility. The construction of the proposed theoretical model was based on the research of various methodologies and various indicators for measuring social responsibility. This model was statistically tested, analyzed, adjusted, and the end result is a consistent model to measure the perceived value of social responsibility of IPEN. This work could also be applied to other institutions. Moreover, it may be improved and become a tool that will serve as a thermometer to measure social and environmental issues, and will support decision making in various management processes. (author)

  16. Bank Portfolio Structure and Economic Absorption Theory of Economic Development: A Theoretical Proposition

    Directory of Open Access Journals (Sweden)

    Uduak B. UBOM

    2016-11-01

    Full Text Available The focus of this article was on theoretical proposition of Bank Portfolio Structure and Economic Absorption Theory of economic development. Specifically, the work sought to establish the basis of bank portfolio rigidity and to identify the causes of economic absorption problems and their implications on economic development. The theoretical and conceptual research designs were used. Existing literatures were reviewed using archival retrieval approach, library search and internet exploration. The information obtained was judgmentally, logically and qualitatively analyzed. It was discovered among others, that, bank portfolio rigidity stems from regulatory policy defects using inconsistent monetary policy tools such as high liquidity ratio and cash ratio, etc. and compelling the banks to adhere to the regulatory requirement, as well as lack of adequate and quality stock of infrastructure and technology as the basic causes of economic absorption problems. Above all, low level of economic absorption has been discovered to hinder effective contributions of banks to economic development. Following from above, it was therefore recommended that regulatory tools used by Central Banks should be aligned with the development needs of the economy and the direction of governments. The monetary policy tools such as liquidity and cash ratios should also be moderated and stabilized for stable bank portfolio performance as well as aggressive improvement in the stock and quality of infrastructure and technology within an economy. With the new theory, it is expected that policy formulations and adjustments concerning bank portfolio structure and management would be designed with adequate flexibility and focus on long term loans and investments coupled with improved stock and quality of infrastructure to enhance economic development. This theory therefore provides another frontier of research on bank portfolio structure and contributions to economic development.

  17. Sasset: Attribute verification of accountancy records in nuclear safeguards Pt.1: Theoretical basis

    International Nuclear Information System (INIS)

    Mueller, K.H.

    1980-01-01

    This study demonstrates the construction of a sampling plan to be followed by the inspector during the statical verification (in attribute mode) of the accountancy records of a nuclear fuel fabrication plant. It presents the instructions defining inspector's tasks and guiding his actions; it permits to validate his decisions. Part I deals with the statistical fundaments of the verification technique in attribute mode. Part II is a manual for the corresponding computer code SASSET developed at JRC Ispra

  18. Automatic defects recognition in composite aerospace structures from experimental and theoretical analysis as part of an intelligent infrared thermographic inspection system

    Science.gov (United States)

    David, Denis G. F.; Marin, J. Y.; Tretout, Herve R.

    An original concept for IR thermography nondestructive testing is validated. The principles of image and data processing investigated and developed as well as the utilization of AI should be transposable to other nondestructive techniques such as ultrasounds and X-rays. It is shown that modeling can be used in different ways to play a great part in the detection, the interpretation, and the sizing of the defects. The original concept lies in the comparison of experimental data with theoretical ones in order to identify regions of abnormal behavior related to defects. A Laplace transforms analytical method is successfully implemented in the case of composite materials such as graphite epoxy to identify a set of thermal parameters which contributes to the expertise. This approach is extended to a more complicated composite material such as Kevlar, which presents semitransparent characteristics. This modeling technique, which expresses experimental data in terms of thermal parameters, makes it possible to increase SNR and reduce the number of thermal images to be processed.

  19. 29 CFR Appendix A to Part 1 - Appendix A to Part 1

    Science.gov (United States)

    2010-07-01

    ..., 79 Stat. 21; 40 U.S.C. 14701). 21. Health Services Research, Health Statistics, and Medical Libraries.... 3222). 40. Juvenile Delinquency Prevention Act (sec. 1, 86 Stat. 536; 42 U.S.C. 3884). 41. New...

  20. Capacity Development and Strengthening for Energy Policy formulation and implementation of Sustainable Energy Projects in Indonesia CASINDO. Deliverable No. 15. Research agendas of the Indonesian partner universities. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Wijnker, M. [Eindhoven University of Technology TUE, Eindhoven (Netherlands)

    2010-09-15

    The overall objective of the CASINDO programme is to establish a self-sustaining and self-developing structure at both the national and regional level to build and strengthen human capacity to enable the provinces of North Sumatra, Yogyakarta, Central Java, West Nusa Tenggara and Papua to formulate sound policies for renewable energy and energy efficiency and to develop and implement sustainable energy projects. This report provides an overview of the status of development of research agendas at the five partner universities. The research agendas consists of a research proposals, purchasing and installation of research equipment, cooperation with industries and conducting the research proposals. Start of the development of the agendas is determining the fields of interest and formulating research projects. Research development is an ongoing process and therefore by the end of 2011 part 2 of this report will be prepared which will present the new developments in the research agendas over the coming year.

  1. The theoretical character of the X1Σ+ and A1Σ+ states of ScN

    International Nuclear Information System (INIS)

    Feng-Juan, Bai; Chuan-Lu, Yang; Qi, Qian; Ling, Zhang

    2009-01-01

    This paper calculates the potential energy curves (PECs) of the ground state (X 1 Σ + ) and excited state (A 1 Σ + ) of ScN molecule by multireference configuration interaction method. The correct character of the PECs has been gripped while they had been improperly reported in the literature. Based on the PECs, the spectroscopic parameters and vibrational energy levels are determined, and compared with experimental data and other theoretical works available at the present. (atomic and molecular physics)

  2. Development Mechanism of an Integrated Model for Training of a Specialist and Conceptual-Theoretical Activity of a Teacher

    Science.gov (United States)

    Marasulov, Akhmat; Saipov, Amangeldi; ?rymbayeva, Kulimkhan; Zhiyentayeva, Begaim; Demeuov, Akhan; Konakbaeva, Ulzhamal; Bekbolatova, Akbota

    2016-01-01

    The aim of the study is to examine the methodological-theoretical construction bases for development mechanism of an integrated model for a specialist's training and teacher's conceptual-theoretical activity. Using the methods of generalization of teaching experience, pedagogical modeling and forecasting, the authors determine the urgent problems…

  3. Quality of life after percutaneous coronary intervention: part 1.

    Science.gov (United States)

    Cassar, Stephen; R Baldacchino, Donia

    Quality of life (QOL) is a complex concept comprised of biopsychosocial, spiritual and environmental dimensions. However, the majority of research addresses only its physical function perspectives. This two-part series examines the holistic perspective of QOL of patients after percutaneous coronary intervention (PCI). Part 1 explains the research process of a cross-sectional descriptive study and its limitations. Data were collected by a mailed WHOQOL-BREF questionnaire in Maltese from a systematic sample of patients who had undergone PCI; the response rate was 64% (n=228; males n=169, females n=59, age 40-89 years). Part 1 also considers limitations, such as its cross-sectional design and retrospective data collection. The hierarchy of human needs theory (Maslow, 1999) guided the study. Part 2 gives the findings on the holistic view of QOL. Having social and family support, as a characteristic of Maltese culture appeared to contribute towards a better QOL.

  4. FY 1989 report on the results of the development of the entrained bed coal gasification power plant. Part 1. Element study; 1989 nendo seika hokokusho. Funryusho sekitan gaska hatsuden plant kaihatsu - Sono 1. Yoso kenkyu hen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-03-01

    For the purpose of establishing the technology of integrated coal gasification combined cycle power generation, element study was conducted of a 200t/d entrained bed coal gasification pilot plant, and the FY 1989 results were summarized. In the gasification test using 2t/d gasifier equipment, the following were carried out: test on gasification of the coal proposed for pilot plant, test on changes in coal feed ratio, analysis of trace gas elements in coal, study of the fixed bed gas refining system, etc. In the study of large gas turbine combustor for demonstration machine, development of combustor which makes stable combustion in the low load region possible, development of low NOx combustor which controls the conversion of nitrogen compounds such as ammonia in coal gasification gas to NOx, development of combustor which makes the optimum and effective cooling possible by combining film cooling, impingement cooling, etc. In the study of simulation of the combined power generation total system, verification tests on the control mode switching function of the general load pressure control system, movement to meet anomaly of the control system, integrated cooperation control system, etc. (NEDO)

  5. ''Leave me alone lesions'' of the bone. Part 1

    International Nuclear Information System (INIS)

    Hamers, S.; Freyschmidt, J.

    2002-01-01

    ''Leave me alone lesions'' are found in such a wide variety of diseases that the survey is published in two parts, in order to be able to devote appropriate space to the description of the various lesions. This part 1 discusses the ''leave me alone lesions'' involved in juvenile bone cysts, metaphyseal cortical irregularities, fibrous metaphyseal defect (FMD), calcifying osteochondroma, osteomas and lipomas. Part 2 will be published in the next following issue of Radiologie up2date, (No.3/2002). (orig./CB) [de

  6. Development of a vehicle emission inventory with high temporal–spatial resolution based on NRT traffic data and its impact on air pollution in Beijing – Part 1: Development and evaluation of vehicle emission inventory

    Directory of Open Access Journals (Sweden)

    B. Jing

    2016-03-01

    Full Text Available This paper presents a bottom-up methodology based on the local emission factors, complemented with the widely used emission factors of Computer Programme to Calculate Emissions from Road Transport (COPERT model and near-real-time traffic data on road segments to develop a vehicle emission inventory with high temporal–spatial resolution (HTSVE for the Beijing urban area. To simulate real-world vehicle emissions accurately, the road has been divided into segments according to the driving cycle (traffic speed on this road segment. The results show that the vehicle emissions of NOx, CO, HC and PM were 10.54  ×  104, 42.51  ×  104 and 2.13  ×  104 and 0.41  ×  104 Mg respectively. The vehicle emissions and fuel consumption estimated by the model were compared with the China Vehicle Emission Control Annual Report and fuel sales thereafter. The grid-based emissions were also compared with the vehicular emission inventory developed by the macro-scale approach. This method indicates that the bottom-up approach better estimates the levels and spatial distribution of vehicle emissions than the macro-scale method, which relies on more information. Based on the results of this study, improved air quality simulation and the contribution of vehicle emissions to ambient pollutant concentration in Beijing have been investigated in a companion paper (He et al., 2016.

  7. THE THEORETICAL AND METHODICAL APPROACH TO AN ASSESSMENT OF A LEVEL OF DEVELOPMENT OF THE ENTERPRISE IN CONDITIONS OF GLOBALIZATION

    Directory of Open Access Journals (Sweden)

    Tatiana Shved

    2016-11-01

    Full Text Available The subject of this article is theoretical, methodical and practical aspects of enterprise development in conditions of globalization. The purpose of this research is to provide theoretical and methodical approach to an assessment of a level of development of the enterprise, which is based on the relationship between the factors and influence, illustrating the effect of the internal and external environment of enterprises functioning, and indicates the level of development of the enterprise. Methodology. Theoretical basis of the study was the examination and rethinking of the main achievements of world and domestic science on the development of enterprises. To achieve the objectives of the research following methods were used: systemic and structural analysis for the formation of methodical approaches to the selection of the factors, influencing the development of enterprises; abstract and logical – for the formulation of conclusions and proposals; the method of valuation and expert assessments to the implementation of the proposed theoretical and methodical approach to an assessment of a level of development of the enterprise in conditions of globalization. Results of the research is the proposed theoretical and methodical to an assessment of a level of development of the enterprise in conditions of globalization, which is associated with the idea of development of the enterprise as a system with inputs–factors, influencing on the development , and outputs – indicators of the level of enterprise development within these factors. So, the chosen factors – resources, financial-economic activity, innovation and investment activities, competition, government influence, and foreign trade. Indicators that express these factors, are capital productivity, labour productivity, material efficiency within the first factor; the profitability of the activity, the coefficient of current assets, the total liquidity coefficient, financial stability

  8. Fiscal 1999 achievement report on regional consortium research and development project. Regional consortium research and development of energy in its 1st year (Research and development of technologies for development and manufacture of magnesium alloys for cast and forged automotive parts); 1999 nendo jidosha muke chutanko buhin magnesium gokin no kaihatsu oyobi sono kako gijutsu no kenkyu kaihatsu seika hokokusho. 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The research and development efforts aim to use more magnesium alloys of high performance aboard passenger cars. In the research and development of magnesium alloys for die-casting, studies are conducted about 14 kinds of alloys with their heat treatment properties improved, all based on an Mg-9%Zn-4.5%Al-0.6%Ca alloy which is expected to be excellent in resistance to heat and corrosion. In the development of forging-oriented high-strength magnesium alloys to be excellent in withstanding a hot working process, tractive characteristics superior to those of a forged 6061 aluminum material are obtained from an annealed ZK31 alloy. In the development of a high-performance heat-resistant magnesium alloy die-casting technology, it is found that an injection speed higher than that used for the existing alloys is necessary to achieve a product quality which is sound. This is true for all heat-resistant alloys except the ZAC series. Furthermore, technologies are developed which involve the forging of high-performance magnesium alloys, high-precision high-speed wet cutting, surface reforming of the environmentally friendly type, laser beam welding, etc. (NEDO)

  9. Theoretical investigation of the structural stabilities, optoelectronic properties and thermodynamic characteristics of GaPxSb1-x ternary alloys

    Science.gov (United States)

    Oumelaz, F.; Nemiri, O.; Boumaza, A.; Ghemid, S.; Meradji, H.; Bin Omran, S.; El Haj Hassan, F.; Rai, D. P.; Khenata, R.

    2018-06-01

    In this theoretical study, we have investigated the structural, phase transition, electronic, thermodynamic and optical properties of GaPxSb1-x ternary alloys. Our calculations are performed with the WIEN2k code based on density functional theory using the full-potential linearized augmented plane wave method. For the electron exchange-correlation potential, a generalized gradient approximation within Wu-Cohen scheme is considered. The recently developed Tran-Blaha modified Becke-Johnson potential has also been used to improve the underestimated band gap. The structural properties, including the lattice constants, the bulk moduli and their pressure derivatives are in very good agreement with the available experimental data and theoretical results. Several structural phase transitions were studied here to establish the stable structure and to predict the phase transition under hydrostatic pressure. The computed transition pressure (Pt) of the material of our interest from the zinc blende (B3) to the rock salt (B1) phase has been determined and found to agree well with the experimental and theoretical data. The calculated band structure shows that GaSb binary compound and the ternary alloys are direct band gap semiconductors. Optical parameters such as the dielectric constants and the refractive indices are calculated and analyzed. The thermodynamic results are also interpreted and analyzed.

  10. Education for Sustainable Development in Malaysia's National Curriculum Reformation: A Theoretical Exploration

    Directory of Open Access Journals (Sweden)

    Aai Sheau Yean

    2014-10-01

    Full Text Available This article aims to examine the feasibility and potential of including appropriate Education for Sustainable Development (ESD elements in the National Curriculum Reformation of Malaysia that is set to be introduced in the year 2017. This is done through the proposal of a theoretical approach for understanding ESD fit for Malaysia from an environmental epistemology. To start with, this article outlines dominant ideologies and epistemologies revolving around the concept of Sustainable Development (SD and focuses on critiquing the underlying anthropocentric tendencies found within. Drawing principally from the ideas of Schumacher (1973, Orr (2004, and Sterling (1992, the article then sets out to examine the ideologies and epistemologies needed to support education reformation that are more environmentally sensitive in nature.

  11. THEORETICAL JUSTIFICATION OF THE CONCEPT OF INNOVATION DEVELOPMENT OF BUSINESS PROCESSES IN THE COMPANY

    Directory of Open Access Journals (Sweden)

    Galina G. Garanina

    2014-01-01

    Full Text Available This article contains theoretical and practical justification of the concept of innovative development of business processes based on the information analysis of the company’s infrastructure under the conditions of building a common information space. This study focuses on the supporting business processes update, on the documented information processing based on the state-of-the-art information technology solutions in particularly.The factors preventing an enterprise to build a common information space are highlighted in this study. The functional set of the management areas is examined and the degree of state-of-the-art information technology utilization to support the company’s process areas is analyzed. It is proposed to overcome the identified barriers through the automation of the company’s process areas and innovative development of supporting business processes of documented information processing by using modern information technology resources.

  12. Fostering Professional Nursing Careers in Hospitals: The Role of Staff Development, Part 2.

    Science.gov (United States)

    Sovie, Margaret D.

    1983-01-01

    Building on the model of professional nursing careers presented in Part 1, the author discusses the aspects of professional maturation and professional mastery, focusing on the vital role of staff development for career advancement. (SK)

  13. Development of an enhanced loose parts monitoring system (LPMS)

    International Nuclear Information System (INIS)

    Choi, Y. C.; Park, J. H.; Yoon, D. B.; Choi, K. S.; Sohn, C. H.

    2006-01-01

    LPMS (loose parts monitoring system) is one of the most important structural integrity monitoring systems. It is operated for a early detection of the impacts by loosened or detached metallic, objects on the primary pressure boundary in a nuclear power plant. The impacted parts might cause flow blockage in the fuel channel, prevent the control rod from moving properly, damage the pump impeller, and give rise to cracks on the steam generator tube sheet, etc. In Korea, The LPMS is currently operating in all of the nuclear power plants as a subsystem in the NIMS (NSSS Integrity Monitoring System), However the performances are being deteriorated in both the hardware and software since it was designed in 1980's. In particular the system is not capable of promptly responding to the continuously triggered impacts in a short period failing to monitor the real loose parts. Also the diagnostic tools to estimate the location and the mass or energy of the impact source have not been reflected. Therefore, a new loose parts monitoring system has been developed to improve the capabilities of the current one and ultimately to replace it. An enhanced Loose Parts Monitoring System(LPMS) has been developed by KAERI(Korea Atomic Energy Research Inst.), not only to improve the performance of an on-line signal processing for a monitoring system but also to enhance the evaluation technique of the true impact signals by loose parts. This new system has taken into account the state-of-the-art technology to cover the problems with the conventional system. (authors)

  14. External Validity in the Study of Human Development: Theoretical and Methodological Issues

    Science.gov (United States)

    Hultsch, David F.; Hickey, Tom

    1978-01-01

    An examination of the concept of external validity from two theoretical perspectives: a traditional mechanistic approach and a dialectical organismic approach. Examines the theoretical and methodological implications of these perspectives. (BD)

  15. 12 CFR 714.1 - What does this part cover?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false What does this part cover? 714.1 Section 714.1 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS LEASING § 714... credit union, must follow when engaged in the leasing of personal property. ...

  16. 30 CFR 885.1 - What does this part do?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false What does this part do? 885.1 Section 885.1 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR... within your jurisdiction have been addressed. OSM's “Final Guidelines for Reclamation Programs and...

  17. 19 CFR 213.1 - Purpose and applicability of part.

    Science.gov (United States)

    2010-04-01

    ... 213.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.1 Purpose and applicability of part. (a) Section 339 of... benefits available under the trade laws identified in § 213.2(b) and the procedures to be followed and...

  18. 16 CFR 1509.1 - Scope of part 1509.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Scope of part 1509. 1509.1 Section 1509.1 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FEDERAL HAZARDOUS SUBSTANCES ACT REGULATIONS.... The English approximations are provided in parentheses for convenience and information only, and do...

  19. 29 CFR 578.1 - What does this part cover?

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false What does this part cover? 578.1 Section 578.1 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR REGULATIONS MINIMUM WAGE... repeatedly or willfully violates the minimum wage (section 6) or overtime provisions (section 7) of the Act...

  20. Training of nuclear power facility personnel. Part 1

    International Nuclear Information System (INIS)

    1989-06-01

    The proceedings of the conference entitled ''Training of Nuclear Power Facility Personnel'' and held in Tale, Czechoslovakia, on 24 - 27 April 1989, contain full texts of 58 contributions, 57 of which fall in the INIS subject scope. The aim of the conference was to summarize experience gained during the training and education of Czechoslovak nuclear power plants operating personnel, to put forth new suggestions for increasing the safety and reliability of nuclear power plants, and to establish the needs and new trends in the training and education of nuclear power plants personnel. The topics treated at the conference can be divided into three basic groups as follows: 1. professional qualification of nuclear power plant staff members; 2. development of technical means for the nuclear power plants personnel training; and 3. training of maintenance personnel, the system and organization of this training and education. The proceedings are published in two volumes. Part 1 contains the texts of 25 papers falling in the INIS subject scope. (Z.M.)