WorldWideScience

Sample records for paris h-j butt

  1. Paris

    Science.gov (United States)

    2001-01-01

    [figure removed for brevity, see original site] Figure 1 This image of Paris was acquired on July 23, 2000 and covers an area of 23 by 20 km. Known as the City of Light, Paris has been extolled for centuries as one of the great cities of the world. Its location on the Seine River, at a strategic crossroads of land and river routes, has been the key to its expansion since the Parisii tribe first settled here in the 3rd century BC. Paris is an alluring city boasting many monumental landmarks, such as the Cathedral of Notre Dame, the Louvre, and the Eiffel Tower. Its beautiful gardens, world-class cuisine, high fashion, sidewalk cafes, and intellectual endeavors are well known. The city's cultural life is centered on the Left Bank of the Seine, while business and commerce dominate the Right Bank. The image is located at 48.8 degrees north latitude and 2.3 degrees east longitude. In figure 1, the 4 enlarged areas zoom in to some of the major buildings. In the UPPER LEFT, the Eiffel Tower and its shadow are seen. Based on the length of the shadow and the solar elevation angle of 59 degrees, we can calculate its height as 324 m (1054 ft), compared to its actual height of 303 m (985 ft). In the UPPER RIGHT, the Arc de Triomphe is at the center of the Place de L'etoile, from which radiate 12 major boulevards. In the LOWER LEFT is the Tuileries Garden and the Louvre Museum art its eastern end. In the LOWER RIGHT is the Invalides, the burial place and monument of Napoleon Bonaparte. The U.S. science team is located at NASA's Jet Propulsion Laboratory, Pasadena, Calif. The Terra mission is part of NASA's Science Mission Directorate.

  2. H.J. Andrews Experimental Forest.

    Science.gov (United States)

    Art McKee; Pamela. Druliner

    1998-01-01

    The H.J. Andrews Experimental Forest is a world renowned center for research and education about the ecology and management of forests and streams. Located about 50 miles (80 km) east of Eugene, Oregon, the Andrews Experimental Forest lies in the Blue River Ranger District of the Willamette National Forest. Established in 1948, the Experimental Forest is administered...

  3. Interview with Gavin Butt

    DEFF Research Database (Denmark)

    Hasse Jørgensen, Stina; Alexandra Sofie, Jönsson

    2008-01-01

    We have interviewed Gavin Butt about his research interest in the cross-field between performance and performativity in the visual arts: queer theory, queer cultures and their histories, post-second world war U.S. art, contemporary art and critical theory.......We have interviewed Gavin Butt about his research interest in the cross-field between performance and performativity in the visual arts: queer theory, queer cultures and their histories, post-second world war U.S. art, contemporary art and critical theory....

  4. FIRE HAZARDS ANALYSIS - BUSTED BUTTE

    International Nuclear Information System (INIS)

    Longwell, R.; Keifer, J.; Goodin, S.

    2001-01-01

    The purpose of this fire hazards analysis (FHA) is to assess the risk from fire within individual fire areas at the Busted Butte Test Facility and to ascertain whether the DOE fire safety objectives are met. The objective, identified in DOE Order 420.1, Section 4.2, is to establish requirements for a comprehensive fire and related hazards protection program for facilities sufficient to minimize the potential for: (1) The occurrence of a fire related event. (2) A fire that causes an unacceptable on-site or off-site release of hazardous or radiological material that will threaten the health and safety of employees. (3) Vital DOE programs suffering unacceptable interruptions as a result of fire and related hazards. (4) Property losses from a fire and related events exceeding limits established by DOE. Critical process controls and safety class systems being damaged as a result of a fire and related events

  5. Paris Offscreen: Chinese Tourists in Cinematic Paris

    NARCIS (Netherlands)

    Y.-A. O. Dung (Yun-An Olivia); S.L. Reijnders (Stijn)

    2013-01-01

    markdownabstract__Abstract__ This article examines from a European-Asian perspective the relationship between media representations and the tourist’s imagination. We use the case of Chinese tourists in Paris to investigate how these non-European tourists imagine Europe, and how these imaginations

  6. Science and Society in the Eugenic Thought of H. J. Muller

    Science.gov (United States)

    Allen, Garland E.

    1970-01-01

    Traces the growth of theories of eugenics during the twentieth century, focussing on the work of H. J. Muller. Concludes that "Muller's lasting contribution was to write the hereditarian attitudes associated with traditional eugenics and the environmentalist's viewpoint associated with modern sociology to obtain a humane and reasoned approach to…

  7. F. H. C h . J othmann , De Bijbel in de loop der eeuwen. Kampen, J ...

    African Journals Online (AJOL)

    Test

    F. H. C h . J othmann , De Bijbel in de loop der eeuwen. Kampen, J . H. Kok. N.V., 1954, 43 bis. Prys 95 cent. Hierdie werkie geskryf vir gebruik op skool, kategesasie en jeug- vereniging is besonder smakelik versorg met uiters insiggewende illu- strasies oor die geskiedenis van die Bybel as geskrif en boek. Die stof is.

  8. From Penrith to Paris

    Directory of Open Access Journals (Sweden)

    Katherine Elizabeth Clay

    2006-09-01

    Full Text Available Katherine Clay has written her first graphic novel, 'From Penrith to Paris', based on experiences of her first semester in France. It deals with the issues of student life, the loss of cultural identity through language and what it means to come from the cultural wasteland of Sydney to the cultural capital of the world - Paris. Through these funny and often life changing experiences, she realises the value of her hometown and that culture, no matter how it is perceived, plays an enormous role in the shaping of individuals.

  9. Feeding the masses: H.J. Heinz and the creation of industrial food.

    Science.gov (United States)

    Petrick, Gabriella M

    2009-03-01

    The H.J. Heinz Company's commitment to the purity and quality of its products in the late nineteenth and early twentieth century helped usher in an era of industrial food. While canning had been around for decades, it was not until both scientist and technologists innovations solved problems like bacterial contamination and mass-produced cans that Americans began to eat canned food on a regular basis. In addition to money-back guarantees, Heinz pioneered product tastings as a marketing tool in an attempt to convince skeptical housewives that his products were not only delicious, but were also safe to eat.

  10. Comment on 'A schematic model of crater modification by gravity' by H. J. Melosh

    International Nuclear Information System (INIS)

    Pike, R.J.

    1983-01-01

    Size-dependent variations in the morphology of impact craters on planets and satellites pose controversial problems. H. J. Melosh has continued to emphasize theoretical analysis in modeling the morphologic transition from simple to complex craters. His latest results [Melosh, 1982] outline a comprehensive hypothesis wherein deep-seated collapse of the transient cavity as a Bingham plastic material to produce central peaks and, seemingly, slump terraces is brought about by acoustic fluidization. However, Melosh's paper also contains inconsistent or ambiguously reported observations and some statements and interpretations that need to be clarified

  11. Paris Conference (Further report)

    International Nuclear Information System (INIS)

    Anon.

    1982-01-01

    From 26-31 July, the international particle physics community met for its traditional biennial 'Rochester' jamboree, held this time in Paris. While there were no major physics surprises, there was still plenty of interest for all and the ground that was covered amply demonstrated the progress which has been made since the previous round of international meetings. The emphasis is very much on improving the already considerable level of agreement between different experiments and between experimental results and theoretical predictions

  12. 77 FR 12106 - Kapka Butte Sno-Park Construction

    Science.gov (United States)

    2012-02-28

    ... DEPARTMENT OF TRANSPORTATION Federal Highway Administration Kapka Butte Sno-Park Construction... Construction project. SUMMARY: The FHWA is issuing this notice to advise the public that the FHWA is officially designated as the Joint-Lead Agency pursuant to 23 U.S.C. 139(c)(1) for the Kapka Butte Sno-Park Construction...

  13. Physics buzz in Paris

    CERN Multimedia

    Katie Yurkewicz

    2010-01-01

    The International Conference on High Energy Physics (ICHEP) took place from 22 to 28 July in Paris, and first results from the Large Hadron Collider experiments received top billing.   More than 1,100 physicists gathered in the Palais des Congrès conference centre to attend ICHEP, the world’s premier particle physics conference, where scientists presented and discussed the latest and most intriguing results from experiments in particle physics, particle astrophysics and cosmology, innovative theoretical approaches and predictions, and concepts for future accelerators and particle detectors. The buzz about the LHC experiments caught the eye of French President Nicolas Sarkozy, who addressed the conference on Monday 26 July. President Sarkozy exhorted the particle physics community to continue its quest to understand the nature of the Universe, and stated his belief that investment in fundamental research is critical for the progress of mankind. Steve Myers started off the mo...

  14. Postcard from Paris

    CERN Multimedia

    2010-01-01

    Earlier this week I was in Paris to join particle physicists from around the world at the International Conference on High-Energy Physics, ICHEP 2010. This conference series began in 1950 as the ‘Rochester series’, named for the original venue in the US, and its meetings rapidly became the place to present the latest results and discoveries.   Particle physics has certainly come a long way since those early days. In 60 years, the meetings have witnessed the birth and growth of CERN, the development of the current Standard Model of particles and their interactions - and now the first results from a truly international project, the LHC. I’d had the opportunity to be present at some of the previous meetings where important discoveries were announced, but this was the first time I had the privilege to attend as the Director-General of the laboratory that was the focus of much of the attention. It is clear from many of the people with whom I talked that the high quality ...

  15. Sutter Buttes-the lone volcano in California's Great Valley

    Science.gov (United States)

    Hausback, Brain P.; Muffler, L.J. Patrick; Clynne, Michael A.

    2011-01-01

    The volcanic spires of the Sutter Buttes tower 2,000 feet above the farms and fields of California's Great Valley, just 50 miles north-northwest of Sacramento and 11 miles northwest of Yuba City. The only volcano within the valley, the Buttes consist of a central core of volcanic domes surrounded by a large apron of fragmental volcanic debris. Eruptions at the Sutter Buttes occurred in early Pleistocene time, 1.6 to 1.4 million years ago. The Sutter Buttes are not part of the Cascade Range of volcanoes to the north, but instead are related to the volcanoes in the Coast Ranges to the west in the vicinity of Clear Lake, Napa Valley, and Sonoma Valley.

  16. Invertebrates of The H.J. Andrews Experimental Forest, Western Cascades, Oregon: I. An annotated checklist of fleas.

    Science.gov (United States)

    Robert E. Lewis; Chris Maser

    1981-01-01

    During a trapping survey of small mammals (approximately 3,000 individuals), species of fleas (1,632 specimens) were collected in the H.J. Andrews Experimental Forest, Western Cascades, Oregon. Host mammals were represented by 15 species—6 insectivores and 9 rodents captured from June through September. The collections extend our knowledge of the fauna of Oregon.

  17. Invertebrates of The H.J. Andrews Experimental Forest, Western Cascades, Oregon: III. The Orthoptera (Grasshoppers and Crickets).

    Science.gov (United States)

    David C. Lightfoot

    1986-01-01

    An inventory of Orthoptera (grasshoppers and crickets) at the H.J. Andrews Experimental Forest, near Blue River, Oregon, was conducted to determine the species present and ecological relationships. A key for identification and an annotated list are presented. From qualitative assessments of successional habitat relationships, generalized species associations of forest...

  18. Invertebrates of the H.J. Andrews Experimental Forest, western Cascades, Oregon II. an annotated checklist of caddisflies (Trichoptera)

    Science.gov (United States)

    N.H. Anderson; G.M. Cooper; D.G Denning

    1982-01-01

    At least 99 species, representing 14 families of Trichoptera, are recorded from the H.J. Andrews Experimental Forest, near Blue River, Oregon. The collecting sites include a wide diversity of environmental conditions in a 6000-hectare watershed of the western Cascade Range (from 400 to 1 630 meters in altitude and from 1st- to 7th-order streams).

  19. Invertebrates of The H.J. Andrews Experimental Forest, Western Cascade Mountains, Oregon: IV. The Oribatid Mites (Acari: Cryptostigmata).

    Science.gov (United States)

    Andrew Moldenke; Becky. Fichter

    1988-01-01

    A fully illustrated key is presented for identifying genera of oribatid mites known from or suspected of occurring in the Pacific Northwest. The manual includes an introduction detailing sampling methodology; an illustrated glossary of all terminology used; two color plates of all taxa from the H. J. Andrews Experimental Forest; a diagrammatic key to the 16 major...

  20. Creep failure analysis of butt welded tubes

    International Nuclear Information System (INIS)

    Browne, R.J.; Parker, J.D.; Walters, D.J.

    1981-01-01

    As part of a major research programme to investigate the influence of butt welds on the life expectancy of tubular components, a series of internal-pressure, stress-rupture tests have been carried out. Thick walled 1/2Cr 1/2Mo 1/4V tube specimens were welded with mild steel, 1Cr 1/2Mo steel, 2 1/4Cr 1Mo steel or nominally matching 1/2Cr 1/2Mo 1/4V steel to give a wide range of weld metal creep strengths relative to the parent tube. The weldments were tested at 565 0 C at two values of internal pressure, and gave failure lives of up to 44,000 hrs. Finite element techniques have been used to determine the stationary state stress distribution in the weldment which was represented by a three material model. Significant stress redistribution was indicated and these results enabled the position and orientation of cracking and the rupture life to be predicted. The theoretical and experimental results have been used to highlight the limitations of current design methods which are based on the application of the mean diameter hoop stress to the parent material stress rupture data. (author)

  1. Geographic patterns of cigarette butt waste in the urban environment.

    Science.gov (United States)

    Marah, Maacah; Novotny, Thomas E

    2011-05-01

    This reports the initial phase of a study to quantify the spatial pattern of cigarette butt waste in an urban environment. Geographic Information Systems (GIS) was used to create a weighted overlay analysis model which was then applied to the locations of businesses where cigarettes are sold or are likely to be consumed and venues where higher concentrations of butts may be deposited. The model's utility was tested using a small-scale litter audit in three zip codes of San Diego, California. We found that cigarette butt waste is highly concentrated around businesses where cigarettes are sold or consumed. The mean number of butts for predicted high waste sites was 38.1 (SD 18.87), for predicted low waste sites mean 4.8 (SD 5.9), psales and consumption. A GIS and weighted overlay model may be a useful tool in predicting urban locations of greater and lesser amounts of cigarette butt waste. These data can in turn be used to develop economic cost studies and plan mitigation strategies in urban communities.

  2. Bali Cattle Carcass Characteristic of Different Butt Shape Condition

    Science.gov (United States)

    Hafid, H.; Nuraini; Inderawati; Kurniawan, W.

    2018-02-01

    Carcass was main product on cattle slaughtering which contain beef for human consumption and it has high nutritional and economical value. Carcass production on cattle has been influenced by several factors, such as cattle breed, feed, and body conformation. Cattle Butt Shape was one of part cattle body conformation which allegedly has have positive correlation on produced carcass. This research was aimed to evaluate Butt Shape condition influenced on Bali cattle carcass characteristic. The research was using Bali cattle which slaughter in Kendari Slaughtering House (Rumah Potong Hewan/RPH - Kendari). The observation includes weighing, and measuring parts of carcass was conducted on 60 heads of Halal process slaughtered Bali cattle which traditionally maintained. The research parameters were carcass productivity parameters i.e: slaughtering weight, carcass weight and length, leg length and circumstances. Obtained data were analyzed using Complete Randomized Design and post hoc analyzed using Least Significant Different if have any influence. The research result showed that cattle Butt Shape condition have significant (pBali cattle carcass productivity parameters. Butt shape with B category was result the best carcass productivity compare the others, while C category was better than D. It can be concluded that body and carcass weight were linearly influenced by cattle butt shape.

  3. [Even cigarette butts can impact environment and health: preliminary considerations].

    Science.gov (United States)

    Martino, Gianrocco; Gorini, Giuseppe; Chellini, Elisabetta

    2013-01-01

    In Italy, every year about 72 billion of cigarette butts are thrown away in the environment. Cigarette butts represent 50% of the wastes of urban areas (parks, roads) in the world, and 40% of Mediterranean Sea wastes. In particular, total polluting load is constituted of 1,872 Bq millions of Polonium-210, assuming 75 mBq per cigarette butt, and 1,800 tons of volatile organic compounds. As a matter of fact, according to several surveys, cigarette butts are considered by smokers and non-smokers as a common and acceptable waste in the environment. In 2008, European Union issued a Directive on wastes considering the «extended producer responsibility» (i.e., every industry is liable for costs of collection, transport and disposal of its own products). In October 2012, the Italian Parliament proposed a bill that classifies cigarette butts as special wastes in the frame of this responsibility. It could be interesting in the future to follow the legislative process of that bill in the Italian Parliament in order to show how strong it will be supported.

  4. Geology of Gable Mountain-Gable Butte Area

    International Nuclear Information System (INIS)

    Fecht, K.R.

    1978-09-01

    Gable Mountain and Gable Butte are two ridges which form the only extensive outcrops of the Columbia River Basalt Group in the central portion of the Pasco Basin. The Saddle Mountains Basalt and two interbedded sedimentary units of the Ellensburg Formation crop out on the ridges. These include, from oldest to youngest, the Asotin Member (oldest), Esquatzel Member, Selah Interbed, Pomona Member, Rattlesnake Ridge Interbed, and Elephant Mountain Member (youngest). A fluvial plain composed of sediments from the Ringold and Hanford (informal) formations surrounds these ridges. The structure of Gable Mountain and Gable Butte is dominated by an east-west-trending major fold and northwest-southeast-trending parasitic folds. Two faults associated with the uplift of these structures were mapped on Gable Mountain. The geomorphic expression of the Gable Mountain-Gable Butte area resulted from the comlex folding and subsequent scouring by post-basalt fluvial systems

  5. 78 FR 21582 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule. SUMMARY: EPA is proposing to approve revisions to the Butte County Air Quality Management...

  6. Equipment for Preparing Pipeline Position Butts for Welding

    Directory of Open Access Journals (Sweden)

    Lobanov L.M.

    2015-09-01

    Full Text Available The results of developments of the Ye.O.Paton Electric Welding Institute and its specialized departments on the designing national equipment models for preparation during the assembly the edges and butt ends of pipeline position butts with the diameter from 14 up to 159 mm, repair and modernization of power engineering objects, including the power units of nuclear and heat electric stations, in chemical and machine building, at enterprises of oil-gas complex and other branches of industry are presented.

  7. 75 FR 53714 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-09-01

    ...)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... stainless steel butt-weld pipe fittings from Japan, Korea, and Taiwan. SUMMARY: The Commission hereby gives... butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

  8. Paris convention - Decisions, recommendations, interpretations

    International Nuclear Information System (INIS)

    1990-01-01

    This booklet is published in a single edition in English and French. It contains decisions, recommendations and interpretations concerning the 1960 Paris Convention on Third Party Liability in the Field of Nuclear Energy adopted by the OECD Steering Committee and the OECD Council. All the instruments are set out according to the Article of the Convention to which they relate and explanatory notes are added where necessary [fr

  9. Investigation and control of factors influencing resistance upset butt welding.

    NARCIS (Netherlands)

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in

  10. Butt-welding technology for double walled Polyethylene pipe

    International Nuclear Information System (INIS)

    Lee, Bo-Young; Kim, Jae-Seong; Lee, Sang-Yul; Kim, Yeong K.

    2012-01-01

    Highlights: ► We developed a butt welding apparatus for doubled walled Polyethylene pipe. ► We design the welding process by analyzing thermal behaviors of the material. ► We performed the welding and tested the welded structural performances. ► We also applied the same technology to PVC pipes. ► We verified the butt welding was successful and effective for the pipes with irregular sections. -- Abstract: In this study, mechanical analyses of a butt welding technology for joining Polyethylene pipe are presented. The pipe had unique structure with double wall, and its section topology was not flat. For an effective repair of leakage and replacements of the pipe, the butt welding technology was developed and tested. For the material characterizations, thermodynamic analyses such as thermal gravimetric analysis and differential scanning calorimetry were performed. Based on the test results, the process temperature and time were determined to ensure safe joining of the pipes using a hot plate apparatus. The welding process was carefully monitored by measuring the temperature. Then, the joined pipes were tested by various methods to evaluate the quality. The analyses results showed the detail process mechanism during the joining process, and the test results demonstrated the successful application of the technology to the sewage pipe repairs.

  11. Application Regarding the Butt-Welding Through Intermediate Melting

    Directory of Open Access Journals (Sweden)

    Tudorel Ene

    2006-10-01

    Full Text Available It consists in presenting butt welding procedure through intermediate melting and its usage for manufacturing cutting tools type drill, tap screw, reamer by welding the active part (made of high-speed steel to the tool tail (made of unalloyed steel wit low carbon.

  12. ANSYS Simulation of Residual Strains in Butt-welded Joints

    Directory of Open Access Journals (Sweden)

    A. Atroshenko

    2014-07-01

    Full Text Available The effect of thermal-strain cycle on residual strains in thin-walled circular seams of cylindrical shells using TIG butt welds was studied. Estimates were calculated using numerical modelling. The structure was made of corrosion-resistant austenitic steels.

  13. Regulating the disposal of cigarette butts as toxic hazardous waste.

    Science.gov (United States)

    Barnes, Richard L

    2011-05-01

    The trillions of cigarette butts generated each year throughout the world pose a significant challenge for disposal regulations, primarily because there are millions of points of disposal, along with the necessity to segregate, collect and dispose of the butts in a safe manner, and cigarette butts are toxic, hazardous waste. There are some hazardous waste laws, such as those covering used tyres and automobile batteries, in which the retailer is responsible for the proper disposal of the waste, but most post-consumer waste disposal is the responsibility of the consumer. Concepts such as extended producer responsibility (EPR) are being used for some post-consumer waste to pass the responsibility and cost for recycling or disposal to the manufacturer of the product. In total, 32 states in the US have passed EPR laws covering auto switches, batteries, carpet, cell phones, electronics, fluorescent lighting, mercury thermostats, paint and pesticide containers, and these could be models for cigarette waste legislation. A broader concept of producer stewardship includes EPR, but adds the consumer and the retailer into the regulation. The State of Maine considered a comprehensive product stewardship law in 2010 that is a much better model than EPR. By using either EPR or the Maine model, the tobacco industry will be required to cover the cost of collecting and disposing of cigarette butt waste. Additional requirements included in the Maine model are needed for consumers and businesses to complete the network that will be necessary to maximise the segregation and collection of cigarette butts to protect the environment.

  14. GAP WIDTH STUDY IN LASER BUTT-WELDING

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely related......In this paper the maximum allowable gap width in laser butt-welding is intensively studied. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0.5-2.0 m/min, the laser...... to the welding speed, (2) the larger laser power leads to the bigger maximum allowable gap width and (3) the focal point position has very little influence on the maximum gap width....

  15. Investigation and control of factors influencing resistance upset butt welding.

    OpenAIRE

    Kerstens, N.F.H.

    2010-01-01

    The purpose of this work is to investigate the factors influencing the resistance upset butt welding process to obtain an understanding of the metal behaviour and welding process characteristics, so that new automotive steels can be welded with reduced development time and fewer failures in production. In principle the welding process is rather simple, the materials to be joined are clamped between two electrodes and pressed together. Because there is an interface present with a higher resist...

  16. Paris Commune Imagery in China's Mass Media.

    Science.gov (United States)

    Meiss, Guy T.

    The role of ideology in mass media practices is explored in an analysis of the relation between the Paris Commune of 1871 and the Shanghai Commune of 1967, two attempts to translate the philosophical concept of dictatorship of the proletariat into some political form. A review of the use of Paris Commune imagery by the Chinese to mobilize the…

  17. What agreement in Paris in 2015?

    International Nuclear Information System (INIS)

    Colombier, Michel; Ribera, Teresa

    2015-01-01

    In Warsaw, countries agreed to a process whereby each will unilaterally design and communicate its contribution toward reducing greenhouse gas emissions in the atmosphere. This process is to be ratified in late 2015 in Paris. Will the Paris agreement mark a turning point in climate policy? Will it measure up to the ambitions proclaimed by the international community at the Durban meeting?

  18. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO`s environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO`s areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation`s largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST`s Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management.

  19. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary

    International Nuclear Information System (INIS)

    1996-03-01

    The Western Environmental Technology Office (WETO) is a multi-purpose engineering test facility located in Butte, Montana, and is managed by MSE, Inc. WETO seeks to contribute to environmental research by emphasizing projects to develop heavy metals removal and recovery processes, thermal vitrification systems, and waste minimization/pollution prevention technologies. WETO's environmental technology research and testing activities focus on the recovery of usable resources from waste. In one of WETO's areas of focus, groundwater contamination, water from the Berkeley Pit, located near the WETO site, is being used in demonstrations directed toward the recovery of potable water and metal from the heavy metal-bearing water. The Berkeley Pit is part of an inactive copper mine near Butte that was once part of the nation's largest open-pit mining operation. The Pit contains approximately 25 billion gallons of Berkeley Pit groundwater and surface water containing many dissolved minerals. As part of DOE/OST's Resource Recovery Project (RRP), technologies are being demonstrated to not only clean the contaminated water but to recover metal values such as copper, zinc, and iron with an estimated gross value of more than $100 million. When recovered, the Berkeley Pit waters could benefit the entire Butte valley with new water resources for fisheries, irrigation, municipal, and industrial use. At WETO, the emphasis is on environmental technology development and commercialization activities, which will focus on mine cleanup, waste treatment, resource recovery, and water resource management

  20. Une herboristerie ethnique à Paris

    OpenAIRE

    Hamaïdi , Maurad

    2012-01-01

    Place de la Chapelle à Paris, dans le 18e arrondissement. L'enseigne de ce magasin est peu explicite, mais la vitrine laisse deviner le type de produits vendus. L'information est un peu plus développée dans la langue arabe car il y est précisé que la vente concerne tous types d'encens, ainsi que des plantes arabes : il s'agit d'une herboristerie. Il est également écrit que le magasin exporte vers le Maroc : le mot en arabe est ambigu puisqu'il s'agit de "Maghreb", mais en général, utilisé seu...

  1. Paris-Nairobi Conference - Proceedings

    International Nuclear Information System (INIS)

    2011-04-01

    Energy is critical to economic development and poverty reduction. The provision of reliable, affordable and sustainable energy services, especially for the poorest, contributes decisively to the achievement of the Millennium Development Goals. Without energy, economies cannot grow and poverty cannot be reduced. Insufficient electricity supply affects many developing countries. Productivity, competitiveness, employment, and economic and social development are therefore limited. Low income countries are uppermost victims of climate change, though being the least responsible and the least armed to tackle and mitigate it. To meet the energy needs of Africa and other countries vulnerable to climate change and engage them on a sustainable development path, a priority for all countries, a concerted common global action is needed. This action shall be connected with existing initiatives in order to complement and enhance their efficiency. 2012 has been declared the international year for energy access by the United-Nations and during its presidency of the G8/G20, France wishes to foreground this issue. Therefore, France and Kenya want to contribute to this overall action, launching a global partnership for universal access to clean energy. In this context, the ministerial meeting launched this partnership on April 21, 2011 in Paris, France. This first meeting discussed ways to mobilize financing to achieve universal access to energy and to develop cleaner energies. Several obstacles have to be addressed and the following challenges shall be overcome: strengthening national and regional legal framework, improving capacity building and project management (source localization, technological options) and risk management. This document brings together the available presentations given at the conference. Twelve presentations (slides) are compiled in this document and deal with: 1 - white paper presentation (A. Mohamed, P. Lorec); 2 - Establishment of ECREEE as a regional

  2. Preliminary geologic map of the Sleeping Butte volcanic centers

    International Nuclear Information System (INIS)

    Crowe, B.M.; Perry, F.V.

    1991-07-01

    The Sleeping Butte volcanic centers comprise two, spatially separate, small-volume ( 3 ) basaltic centers. The centers were formed by mildly explosive Strombolian eruptions. The Little Black Peak cone consists of a main scoria cone, two small satellitic scoria mounds, and associated lobate lava flows that vented from sites at the base of the scoria cone. The Hidden Cone center consists of a main scoria cone that developed on the north-facing slope of Sleeping Butte. The center formed during two episodes. The first included the formation of the main scoria cone, and venting of aa lava flows from radial dikes at the northeast base of the cone. The second included eruption of scoria-fall deposits from the summit crater. The ages of the Little Black Peak and the Hidden Cone are estimated to be between 200 to 400 ka based on the whole-rock K-Ar age determinations with large analytical undertainty. This age assignment is consistent with qualitative observations of the degree of soil development and geomorphic degradation of volcanic landforms. The younger episode of the Hidden Cone is inferred to be significantly younger and probably of Late Pleistocene or Holocene age. This is based on the absence of cone slope rilling, the absence of cone-slope apron deposits, and erosional unconformity between the two episodes, the poor horizon- development of soils, and the presence of fall deposits on modern alluvial surfaces. Paleomagnetic data show that the centers record similar but not identical directions of remanent magnetization. Paleomagnetic data have not been obtained for the youngest deposits of the Hidden Cone center. Further geochronology, soils, geomorphic, and petrology studies are planned of the Sleeping Butte volcanic centers 20 refs., 3 figs

  3. Littered cigarette butts as a source of nicotine in urban waters

    Science.gov (United States)

    Roder Green, Amy L.; Putschew, Anke; Nehls, Thomas

    2014-11-01

    The effect of nicotine from littered cigarette butts on the quality of urban water resources has yet to be investigated. This two-part study addresses the spatial variation, seasonal dynamics and average residence time of littered cigarette butts in public space, as well as the release of nicotine from cigarette butts to run-off in urban areas during its residence time. Thereby, we tested two typical situations: release to standing water in a puddle and release during alternating rainfall and drying. The study took place in Berlin, Germany, a city which completely relies on its own water resources to meet its drinking water demand. Nine typical sites located in a central district, each divided into 20 plots were studied during five sampling periods between May 2012 and February 2013. The nicotine release from standardized cigarette butts prepared with a smoking machine was examined in batch and rainfall experiments. Littered cigarette butts are unevenly distributed among both sites and plots. The average butt concentration was 2.7 m-2 (SD = 0.6 m-2, N = 862); the maximum plot concentration was 48.8 butts m-2. This heterogeneity is caused by preferential littering (gastronomy, entrances, bus stops), redistribution processes such as litter removal (gastronomy, shop owners), and the increased accumulation in plots protected from mechanized street sweeping (tree pits, bicycle stands). No significant seasonal variation of cigarette butt accumulation was observed. On average, cigarette butt accumulation is characterized by a 6 days cadence due to the rhythm and effectiveness of street sweeping (mean weekly butt accumulation rate = 0.18 m-2 d-1; SD = 0.15 m-1). Once the butt is exposed to standing water, elution of nicotine occurs rapidly. Standardized butts released 7.3 mg g-1 nicotine in a batch experiment (equivalent to 2.5 mg L-1), 50% of which occurred within the first 27 min. In the rainfall experiment, the cumulative nicotine release from fifteen consecutive

  4. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...... penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least...

  5. A Neural Network Approach for GMA Butt Joint Welding

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2003-01-01

    penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...

  6. Observations of elk movement patterns on Fossil Butte National Monument

    Science.gov (United States)

    Olexa, Edward M.; Soileau, Suzanna Carrithers.; Allen, Leslie A.

    2014-01-01

    The elk herd that frequents Fossil Butte National Monument, a subset of the West Green River elk population, provides visitors with seasonal opportunities to view an iconic species of the western United States. Throughout the year, these elk range across a variety of private, State, and Federal lands within close proximity to the Monument. These lands are managed differently for various uses which can create challenging wildlife-management issues and influence the herd’s seasonal movements and distribution. Research lead by the USGS investigates some of the factors associated with these seasonal changes.

  7. Radio and television use in Butte County, California: application to fire prevention

    Science.gov (United States)

    William S. Folkman

    1975-01-01

    A sample of Butte County residents were interviewed about their radio and television use habits. Their responses were analyzed in terms of demographic, social, and economic characteristics. The findings can be used in developing more effective fire prevention programs. Most people in Butte County listen to the radio or watch television but they differ widely in the way...

  8. 77 FR 39735 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines

    Science.gov (United States)

    2012-07-05

    ... revocation of the antidumping duty orders on stainless steel butt-weld pipe fittings From Italy, Malaysia... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines Determination On the basis of the...

  9. 75 FR 76025 - Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan

    Science.gov (United States)

    2010-12-07

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-376 and 563-564 (Third Review)] Stainless Steel Butt-Weld Pipe Fittings From Japan, Korea, and Taiwan AGENCY: United States International... steel butt-weld pipe fittings from Japan, Korea, and Taiwan would be likely to lead to continuation or...

  10. 77 FR 14002 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Final Results...

    Science.gov (United States)

    2012-03-08

    ...] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Final Results of the... Duty Orders on Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines'' from... Commerce (the Department) initiated sunset reviews of the antidumping duty orders on stainless steel butt...

  11. 77 FR 42697 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation...

    Science.gov (United States)

    2012-07-20

    ...] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines: Continuation of... from Italy, Malaysia, and the Philippines.\\2\\ \\1\\ See Antidumping Duty Orders: Stainless Steel Butt...), titled Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines (Investigation...

  12. 76 FR 67473 - Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and The Philippines; Institution of...

    Science.gov (United States)

    2011-11-01

    ... Concerning the Antidumping Duty Orders on Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and... stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would be likely to lead to... antidumping duty orders on imports of stainless steel butt-weld pipe fittings from Italy, Malaysia, and the...

  13. Invertebrates of The H.J. Andrews Experimental Forest, Western Cascade Range, Oregon. V: An Annotated List of Insects and Other Arthropods

    Science.gov (United States)

    Gary L. Parson; Gerasimos Cassis; Andrew R. Moldenke; John D. Lattin; Norman H. Anderson; Jeffrey C Miller; Paul Hammond; Timothy D. Schowalter

    1991-01-01

    An annotated list of species of insects and other arthropods that have been collected and studies on the H.J. Andrews Experimental forest, western Cascade Range, Oregon. The list includes 459 families, 2,096 genera, and 3,402 species. All species have been authoritatively identified by more than 100 specialists. Information is included on habitat type, functional group...

  14. Invertebrates of The H.J. Andrews Experimental Forest, western Cascade Range, Oregon. V: An annotated list of insects and other arthropods.

    Science.gov (United States)

    Gary L. Parson; Gerasimos Cassis; Andrew R. Moldenke; John D. Lattin; Norman H. Anderson; Jeffrey C Miller; Paul Hammond; Timothy D. Schowalter

    1991-01-01

    An annotated list of species of insects and other arthropods that have been collected and studies on the H.J. Andrews Experimental forest, western Cascade Range, Oregon. The list includes 459 families, 2,096 genera, and 3,402 species. All species have been authoritatively identified by more than 100 specialists. Information is included on habitat type, functional group...

  15. Climate Justice and the Paris Agreement

    International Nuclear Information System (INIS)

    Michelot, Agnes

    2016-01-01

    The concept of climate justice has been, for the first time, used in an international agreement - namely, the Paris Agreement. But this recognition of the notion of climate justice is extremely restricted by the very way it is formulated. Preamble of the Paris Agreement 'notes' that climate justice is recognized by 'certain cultures'. Does it mean that particular and concrete stakes of climate justice of the pre-COP21 agenda have been recognized or, on the contrary, that the notion so introduced is actually an empty shell without any genuine legal perspective? Considering this uncertainty, it appears relevant to analyze the Paris Agreement through the claims of various groups and coalitions, which influenced the COP21 negotiations

  16. The Western Environmental Technology Office (WETO), Butte, Montana, technology summary

    International Nuclear Information System (INIS)

    1994-09-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. WETO's environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies

  17. The Western Environmental Technology Office (WETO), Butte, Montana, technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-01

    This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. WETO`s environmental technology research and testing activities focus on the recovery of useable resources from waste. Environmental technology development and commercialization activities will focus on mine cleanup, waste treatment, resource recovery, and water resource management. Since the site has no record of radioactive material use and no history of environmental contamination/remediation activities, DOE-EM can concentrate on performing developmental and demonstration activities without the demands of regulatory requirements and schedules. Thus, WETO will serve as a national resource for the development of new and innovative environmental technologies.

  18. The Western Environmental Technology Office (WETO) Butte, Montana

    International Nuclear Information System (INIS)

    1994-10-01

    This document has been prepared to highlight the research, development, demonstration, testing and evaluation activities funded through the Western Environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. This information has been assembled from recently produced Office of Technology Development (OTD) documents which highlight technology development activities within each of the OTD program elements. Projects include: Heavy metals contaminated soil project; In Situ remediation integrated program; Minimum additive waste stabilization program; Resource recovery project; Buried waste integrated demonstration; Mixed waste integrated program; Pollution prevention program; and Mine waste technology program

  19. Features of residual stresses in duplex stainless steel butt welds

    Science.gov (United States)

    Um, Tae-Hwan; Lee, Chin-Hyung; Chang, Kyong-Ho; Nguyen Van Do, Vuong

    2018-04-01

    Duplex stainless steel finds increasing use as an alternative to austenitic stainless steel, particularly where chloride or sulphide stress corrosion cracking is of primary concern, due to the excellent combination of strength and corrosion resistance. During welding, duplex stainless steel does not create the same magnitude or distribution of weld-induced residual stresses as those in welded austenitic stainless steel due to the different physical and mechanical properties between them. In this work, an experimental study on the residual stresses in butt-welded duplex stainless steel is performed utilizing the layering technique to investigate the characteristics of residual stresses in the weldment. Three-dimensional thermos-mechanical-metallurgical finite element analysis is also performed to confirm the residual stress measurements.

  20. BUSTED BUTTE TEST FACILITY GROUND SUPPORT CONFIRMATION ANALYSIS

    International Nuclear Information System (INIS)

    Bonabian, S.

    1998-01-01

    The main purpose and objective of this analysis is to confirm the validity of the ground support design for Busted Butte Test Facility (BBTF). The highwall stability and adequacy of highwall and tunnel ground support is addressed in this analysis. The design of the BBTF including the ground support system was performed in a separate document (Reference 5.3). Both in situ and seismic loads are considered in the evaluation of the highwall and the tunnel ground support system. In this analysis only the ground support designed in Reference 5.3 is addressed. The additional ground support installed (still work in progress) by the constructor is not addressed in this analysis. This additional ground support was evaluated by the A/E during a site visit and its findings and recommendations are addressed in this analysis

  1. Use of pulsed arc welding for butt joint fabrication

    International Nuclear Information System (INIS)

    Merkulov, B.A.

    1977-01-01

    A technology of pulsed-arc butt welding with periodic wire feed to the welding zone has been developed. The pulsed arc is suitable both for submerged and gas-shielded weldings. The technology proposed has some advantages over the stationary-arc welding. Control of the amplitude-frequency characteristics of the process enables one to affect melting and crystallization conditions of the welding crater, weld shape, relation between melting and deposited metal section areas, etc., as well as to reduce heat contribution to the base metal. The new process is shown to be applicable in power engineering. Automatic submerged welding conditions are given for low-carbon and pearlitic heat-resistant steels

  2. Paris-Princeton Lectures on Mathematical Finance

    CERN Document Server

    Carmona, René A; Kohatsu-Higa, Arturo; Lasry, Jean-Michel; Lions, Pierre-Louis; Pham, Huyên; Taflin, Erik

    2007-01-01

    The Paris-Princeton Lectures in Financial Mathematics, of which this is the third volume, will, on an annual basis, publish cutting-edge research in self-contained, expository articles from outstanding - established or upcoming! - specialists. The aim is to produce a series of articles that can serve as an introductory reference for research in the field. It arises as a result of frequent exchanges between the finance and financial mathematics groups in Paris and Princeton. The present volume sets standards with articles by René Carmona, Ivar Ekeland/Erik Taflin, Arturo Kohatsu-Higa, Pierre-Louis Lions/Jean-Michel Lasry, and Hyuên Pham.

  3. Numerical estimation of temperature field in a laser welded butt joint made of dissimilar materials

    Directory of Open Access Journals (Sweden)

    Saternus Zbigniew

    2018-01-01

    Full Text Available The paper concerns numerical analysis of thermal phenomena occurring in the butt welding of two different materials by a laser beam welding. The temperature distribution for the welded butt-joint is obtained on the basis of numerical simulations performed in the ABAQUS program. Numerical analysis takes into account the thermophysical properties of welded plate made of two different materials. Temperature distribution in analysed joints is obtained on the basis of numerical simulation in Abaqus/Standard solver, which allowed the determination of the geometry of laser welded butt-joint.

  4. The myriad challenges of the Paris Agreement

    Science.gov (United States)

    Mitchell, Dann; Allen, Myles R.; Hall, Jim W.; Muller, Benito; Rajamani, Lavanya; Le Quéré, Corinne

    2018-05-01

    The much awaited and intensely negotiated Paris Agreement was adopted on 12 December 2015 by the Parties to the United Nations Framework Convention on Climate Change. The agreement set out a more ambitious long-term temperature goal than many had anticipated, implying more stringent emissions reductions that have been under-explored by the research community. By its very nature a multidisciplinary challenge, filling the knowledge gap requires not only climate scientists, but the whole Earth system science community, as well as economists, engineers, lawyers, philosophers, politicians, emergency planners and others to step up. To kick start cross-disciplinary discussions, the University of Oxford's Environmental Change Institute focused its 25th anniversary conference upon meeting the challenges of the Paris Agreement for science and society. This theme issue consists of review papers, opinion pieces and original research from some of the presentations within that meeting, covering a wide range of issues underpinning the Paris Agreement. This article is part of the theme issue `The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'.

  5. IMS LD. Paris Conference, April 2005

    NARCIS (Netherlands)

    Burgos, Daniel

    2005-01-01

    3 presentations run in Paris, France, in Apri 1st, 2005, in the Cité des Sciences, sponsored by UNFOLD Project and l'AFNOR about the following topics: - Update on UNFOLD CoP Valkenburg meeting 2005 - Creating a UoL - Introducing CopperCore

  6. Morphological diversity of wild medicinal Paris L. from China and ...

    African Journals Online (AJOL)

    Paris L. (Trilliaceae) is a temperate genus of about 24 perennial herbaceous species distributed from Europe to Eastern Asia. Paris is notable in China for its medicinal value. An investigation was conducted to determine the variations of 27 morphological characters of 196 accessions from 8 populations of medicinal Paris ...

  7. 78 FR 21540 - Revisions to the California State Implementation Plan, Butte County Air Quality Management...

    Science.gov (United States)

    2013-04-11

    ... the California State Implementation Plan, Butte County Air Quality Management District and Sacramento Metropolitan Air Quality Management District AGENCY: Environmental Protection Agency (EPA). ACTION: Direct... Quality Management District (BCAQMD) and Sacramento Metropolitan Air Quality Management District (SMAQMD...

  8. California State Implementation Plan; Butte County Air Quality Management District; New Source Review (NSR) Permitting Program

    Science.gov (United States)

    EPA is proposing to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California SIP concerning the District's New Source Review (NSR) permitting program for new and modified sources of air pollution.

  9. Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding

    Science.gov (United States)

    2013-05-01

    H.K.D.H. Bhadeshia, A Model for the Microstruc- ture of Some Advanced Bainitic Steels , Mater. Trans., 1991, 32, p 689–696 19. G.J. Davies and J.G. Garland...REPORT Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding 14. ABSTRACT 16. SECURITY...Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding Report Title ABSTRACT A fully coupled (two-way

  10. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    In a number of systematic laboratory experiments the critical gap distance that results in sound beads in laser butt welding is sought identified. By grinding the edges of the sheets, a number of "reference" welds are made and compared to the sheets with shear cut edges. In the tests the gap...... was set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with a thickness of 0.75 and 1.25 mm with and without zinc coating were analysed. A total of 120 welds were made at different welding speeds.As quality norm DIN 8563 was used to divide the welds into quality classes. A number of welds...... were also x-ray photographed.Of the weld combinations analysed 80 % were of high quality and 17 % of a non-acceptable quality. 90 % of the bad welds had a gap distance larger than 0.05 mm. The results showed that 85 % of the bad welds were shear cut and only 15 % grinded. Two third of the bad welds...

  11. Critical Gap distance in Laser Butt-welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    of "reference" welds are made and compared to sheets with the edges shear cut. The gap distance is precisely controlled by inserting spacers between the sheets. In the tests the gap is set at 0.00, 0.02, 0.05, 0.08 and 0.10 mm. Mild steel (St 1203) with thickness? of 0.75 and 1.25 mm with and without zinc......When butt-welding metal sheets with high power lasers the gap distance between the sheets determine the final quality of the seam. In a number of systematic laboratory experiments the critical gap distance that results in sound beads is identified. By grinding the edges of the sheets, a number...... coating were analysed. A total of 120 welds are made at different welding speeds.As quality norm DIN 8563 is used to divide the welds into quality classes. Since this norm only deals with surface defects a number of welds are also x-ray photographed.According to DIN 8563 the welds have classes of either B...

  12. Residual-stress distributions near stainless steel butt weldments

    International Nuclear Information System (INIS)

    Elligson, W.A.; Shack, W.J.

    1978-01-01

    Concern for the integrity of stainless steel butt-weldments in boiling-water-reactor (BWR) piping systems has stimulated study of the conditions that cause stress corrosion cracking (SCC) in the heat-affected zones (HAZ) of the weldments. It is generally agreed that a high stress exceeding the initial yield strength is one of the essential elements for crack initiation. Since design procedures usually ensure that load stresses are below initial yield, the source of the high stresses necessary to produce SCC is thought to be the residual stresses due to welding. To examine the level of residual stresses in the weldments of interest, bulk residual stresses were measured on 100 mm (4-in.) and 254 mm (10-in.) diameter Schedule 80 piping weldments using strain relief techniques. Both laboratory welded specimens and field welded specimens from reactors in service were studied. Axial bulk residual stress distributions were obtained at 45 0 intervals around the circumference. At each azimuthal position, the residual stresses were measured at seven axial positions: on the weld centerline and 13, 20, and 25 mm on either side of the weld centerline on both the inside and outside surfaces

  13. Tobacco industry responsibility for butts: a Model Tobacco Waste Act.

    Science.gov (United States)

    Curtis, Clifton; Novotny, Thomas E; Lee, Kelley; Freiberg, Mike; McLaughlin, Ian

    2017-01-01

    Cigarette butts and other postconsumer products from tobacco use are the most common waste elements picked up worldwide each year during environmental cleanups. Under the environmental principle of Extended Producer Responsibility, tobacco product manufacturers may be held responsible for collection, transport, processing and safe disposal of tobacco product waste (TPW). Legislation has been applied to other toxic and hazardous postconsumer waste products such as paints, pesticide containers and unused pharmaceuticals, to reduce, prevent and mitigate their environmental impacts. Additional product stewardship (PS) requirements may be necessary for other stakeholders and beneficiaries of tobacco product sales and use, especially suppliers, retailers and consumers, in order to ensure effective TPW reduction. This report describes how a Model Tobacco Waste Act may be adopted by national and subnational jurisdictions to address the environmental impacts of TPW. Such a law will also reduce tobacco use and its health consequences by raising attention to the environmental hazards of TPW, increasing the price of tobacco products, and reducing the number of tobacco product retailers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  14. Bookmaker and pari-mutuel betting

    DEFF Research Database (Denmark)

    Koch, Alexander; Shing, Hui-Fai

    2008-01-01

    A widely documented empirical regularity in gambling markets is that bets on high probability events (a race won by a "favourite") have higher expected returns than bets on low probability events (a "longshot" wins). Such favourite-longshot (FL) biases however appear to be more severe and persist......A widely documented empirical regularity in gambling markets is that bets on high probability events (a race won by a "favourite") have higher expected returns than bets on low probability events (a "longshot" wins). Such favourite-longshot (FL) biases however appear to be more severe...... and persistent in bookmaker markets than in pari-mutuel markets; the latter sometimes exhibit no bias or a reverse FL bias. Our results help understand these differences: the odds grid in bookmaker markets leads to a built-in FL bias, whereas that used in pari-mutuel betting pushes these markets toward a reverse...

  15. Paris-Princeton Lectures on Mathematical Finance

    CERN Document Server

    Çinlar, Erhan; Ekeland, Ivar; Jouini, Elyes; Scheinkman, José; Touzi, Nizar

    2004-01-01

    The Paris-Princeton Lectures in Financial Mathematics, of which this is the second volume, will, on an annual basis, publish cutting-edge research in self-contained, expository articles from outstanding - established or upcoming! - specialists. The aim is to produce a series of articles that can serve as an introductory reference for research in the field. It arises as a result of frequent exchanges between the finance and financial mathematics groups in Paris and Princeton. This volume presents the following articles: "Hedging of Defaultable Claims" by T. Bielecki, M. Jeanblanc, and M. Rutkowski; "On the Geometry of Interest Rate Models" by T. Björk; "Heterogeneous Beliefs, Speculation and Trading in Financial Markets" by J.A. Scheinkman, and W. Xiong.

  16. Porphyry of Russian Empires in Paris

    Science.gov (United States)

    Bulakh, Andrey

    2014-05-01

    Porphyry of Russian Empires in Paris A. G. Bulakh (St Petersburg State University, Russia) So called "Schokhan porphyry" from Lake Onega, Russia, belongs surely to stones of World cultural heritage. One can see this "porphyry" at facades of a lovely palace of Pavel I and in pedestal of the monument after Nicolas I in St Petersburg. There are many other cases of using this stone in Russia. In Paris, sarcophagus of Napoleon I Bonaparte is constructed of blocks of this stone. Really, it is Proterozoic quartzite. Geology situation, petrography and mineralogical characteristic will be reported too. Comparison with antique porphyre from the Egyptian Province of the Roma Empire is given. References: 1) A.G.Bulakh, N.B.Abakumova, J.V.Romanovsky. St Petersburg: a History in Stone. 2010. Print House of St Petersburg State University. 173 p.

  17. The Road Transport world exhibition in Paris

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    Following the agreement between French and German professionals of automobile and industrial vehicle, the Road Transport world exhibition will take place alternatively in Paris and Hanover. The 1995 meeting has taken place in Paris (September 15-21) and about 20 countries were represented. Road transport is the principal way of goods transportation in France and represent 88% of the traffic explained in tons gross and 70% in tons km. The petroleum dependence of the transportation sector is becoming a worrying problem as the gasoline and diesel fuels taxes will be discussed in the 1996 financial laws project. According to the last ''Worldwide energetic perspectives'' report published by the IEA, in 2010 the transportation sector could absorb more than 60% of the worldwide petroleum consumption. This increase represents a challenge to the petroleum industry to increase the energetic efficiency of the vehicle fuels and the production of diesel fuels, and conversely to reduce the pollution effluents. (J.S.). 4 tabs

  18. From Paris to the End of Oil

    OpenAIRE

    Claes, Dag Harald; Hveem, Helge

    2016-01-01

    "This article discusses the possibilities and obstacles for a cost-effective implementation of policies that will lead to a significant reduction in global CO2 emissions from the use of oil. The structural conditions and economic consequences of changing national or regional energy systems vary dramatically. In addition, there are a large number of actors with strong interests along the energy value chain that may potentially halt, delay or alter the implementation of the Paris treaty. We ana...

  19. Paris after Trump: An Inconvenient Insight

    OpenAIRE

    Böhringer, Christoph; Rutherford, Thomas F.

    2017-01-01

    With his announcement to pull the US out of the Paris Agreement US President Donald Trump has snubbed the international climate policy community. Key remaining parties to the Agreement such as Europe and China might call for carbon tariffs on US imports as a sanctioning instrument to coerce US compliance. Our analysis, however, reveals an inconvenient insight for advocates of carbon tariffs: given the possibility of retaliatory tariffs across all imported goods, carbon tariffs do not constitu...

  20. The Paris Agreement to Ignore Reality

    OpenAIRE

    Spash, Clive L.

    2016-01-01

    At the 21st session of the Conference of the Parties to the United Nations Framework Convention on Climate Change held in Paris, France, 30 November to 11 December 2015, an Agreement was reached by the international community including 195 countries. The Agreement has been hailed, by participants and the media, as a major turning point for policy in the struggle to address human induced climate change. The following is a short critical commentary in which I briefly explain why ...

  1. Post Paris and November 8, 2016

    Science.gov (United States)

    Busalacchi, A. J.

    2016-12-01

    COP 21 in Paris, as historic as it was, established the necessary, but not the sufficient. The signatories to the landmark Paris accord are a coalition of the willing, but their pledges are only as good as the sustained will of individual countries to adhere to their commitments. The U.S. presidential election has demonstrated how easily uncertainty can be added. Even if all countries abide by the Paris climate agreement, capping global mean temperatures to 2oC will likely require net zero greenhouse gas emissions by 2085 and substantial negative emissions over the long term. Before the Paris agreement was finished, it was clear that the pledged emission cuts by 2030 would not be sufficient in and of themselves, to stay under 2oC. Given the accumulation of greenhouse gases to date, limiting warming to a maximum of 2oC would require bending the curve of global emissions by 2020, i.e., over the next four years. If the past is a prologue, without even taking into account an emergence from the global recession, we stand a realistic chance of blowing right past the 2oC target. What, then, are the challenges going forward? Is 2oC a real goal that is attainable, or is it a stretch goal? Meeting a 2oC target is a function of when mitigation begins in earnest, the rate of mitigation, and the rate and amount of carbon sequestration. What are the implications of this trade space? While much effort has been put into designing a climate observing system from a science perspective, relatively little thought has been put into determining what observations are needed to support policy decisions, mitigation, and verify the Intended Nationally Determined Contributions that resulted from the Paris Agreement. If 2oC is a stretch goal, intellectual honesty requires that we consider mitigation and adaptation in tandem, and not as either/or. Similarly, even with all its attendant ethical dilemmas, it is important to thoroughly study geoengineering so that policy makers have a robust

  2. The Search for Hot Jupiters using Red Buttes Observatory

    Science.gov (United States)

    Sorber, Rebecca L.; Kar, Aman; Hancock, Daniel A.; Leuquire, Jacob D.; Suhaimi, Afiq; Kasper, David; Jang-Condell, Hannah

    2018-01-01

    The goal of this research is to use the University of Wyoming’s Red Buttes Observatory (RBO) to perform manual, remote, or automated observations of transiting exoplanet candidates. The data contributes to discovery of star systems that include never before identified exoplanets. RBO houses a 0.6-meter telescope and is located approximately 10 miles south of the University of Wyoming’s campus. Our targets are catalogued by the KELT (Kilodegree Extremely Little Telescope) Survey, a photometric search for transiting exoplanets around bright main sequence stars. The KELT Follow-up Network (KELT-FUN), a collaboration of small-aperture telescope users located all over the world, confirms new exoplanet candidates. As part of KELT-FUN, students use the RBO to monitor candidates identified by the KELT team. RBO typically detects transits around stars that are 8-12 in V magnitude, with transit durations of ~1-4 hours and full depth relative changes in brightness above 2 mmags. Using AstroImageJ, we process the data and we look for any indication of a transit occurrence in the processed lightcurve which might confirm the presence of the potential exoplanet. Our team has contributed over 50 light curves to KELT-FUN to date. We are able to compare our data with simultaneous observations by other members of KELT-FUN to maximize the utility of our observations. This project gives undergraduates an authentic scientific research experience, learning how to operate an observatory, process data, and participate in a scientific collaboration.

  3. Microstructure and mechanical performance of autogenously fibre laser beam welded Ti-6242 butt joints

    Energy Technology Data Exchange (ETDEWEB)

    Kashaev, Nikolai, E-mail: nikolai.kashaev@hzg.de; Pugachev, Dmitry; Ventzke, Volker; Fomin, Fedor; Burkhardt, Irmela; Enz, Josephin; Riekehr, Stefan

    2017-05-10

    This work deals with the effects of laser beam power, focus position and advance speed on the geometry, microstructure and mechanical properties such as the tensile strength and microhardness of autogenously fibre laser beam welded Ti-6Al-2Sn-4Zr-2Mo (denoted as Ti-6242) butt joints used for high temperature applications. The Ti-6242 sheet employed here is characterized by a globular (α+β) microstructure. Laser beam welded butt joints consisted of a martensitic fusion zone, inhomogeneous heat affected zones and equiaxed base materials. The microhardness increased from 330 HV 0.3 in base material to 430 HV 0.3 in fusion zone due to the martensitic transformation. Butt joints showed the base material level of strength in tensile test. The local increase in microhardness provided a shielding effect that protected the Ti-6242 butt joint against mechanical damage during the static tensile load test. The predicted critical total underfill depth that does not reduce the tensile strength of the weld was determined to be 25% of the specimen thickness. - Highlights: • Autogenous fibre LBW of Ti-6242 was successfully achieved. • Butt joints showed low levels of porosity and an appropriate seam geometry. • Base material level of strength achieved for tensile strength. • Predicted critical underfill depth is 25% of the specimen thickness.

  4. Short communication: identification of a novel HIV type 1 subtype H/J recombinant in Canada with discordant HIV viral load (RNA) values in three different commercial assays.

    Science.gov (United States)

    Kim, John E; Beckthold, Brenda; Chen, Zhaoxia; Mihowich, Jennifer; Malloch, Laurie; Gill, Michael John

    2007-11-01

    The presence of HIV-1 non-B subtypes is increasing worldwide. This poses challenges to commercial diagnostic and viral load (RNA) monitoring tests that are predominantly based on HIV-1 subtype B strains. Based on phylogenetic analysis of the gag, pol, and env gene regions, we describe the first HIV-1 H/J recombinant in Canada that presented divergent viral load values. DNA sequence analysis of the gag gene region further revealed that genetic diversity between this H/J recombinant and the primers and probes used in the bio-Merieux Nuclisens HIV-1 QT (Nuclisens) and Roche Amplicor Monitor HIV-1, v1.5 (Monitor) viral RNA assays can erroneously lead to undetectable viral load values. This observation appears to be more problematic in the Nuclisens assay. In light of increasing genetic diversity in HIV worldwide we recommend that DNA sequencing of HIV, especially in the gag gene region targeted by primers and probes used in molecular diagnostic and viral load tests, be incorporated into clinical monitoring practices.

  5. The Biosphere Under Potential Paris Outcomes

    Science.gov (United States)

    Ostberg, Sebastian; Boysen, Lena R.; Schaphoff, Sibyll; Lucht, Wolfgang; Gerten, Dieter

    2018-01-01

    Rapid economic and population growth over the last centuries have started to push the Earth out of its Holocene state into the Anthropocene. In this new era, ecosystems across the globe face mounting dual pressure from human land use change (LUC) and climate change (CC). With the Paris Agreement, the international community has committed to holding global warming below 2°C above preindustrial levels, yet current pledges by countries to reduce greenhouse gas emissions appear insufficient to achieve that goal. At the same time, the sustainable development goals strive to reduce inequalities between countries and provide sufficient food, feed, and clean energy to a growing world population likely to reach more than 9 billion by 2050. Here, we present a macro-scale analysis of the projected impacts of both CC and LUC on the terrestrial biosphere over the 21st century using the Representative Concentration Pathways (RCPs) to illustrate possible trajectories following the Paris Agreement. We find that CC may cause major impacts in landscapes covering between 16% and 65% of the global ice-free land surface by the end of the century, depending on the success or failure of achieving the Paris goal. Accounting for LUC impacts in addition, this number increases to 38%-80%. Thus, CC will likely replace LUC as the major driver of ecosystem change unless global warming can be limited to well below 2°C. We also find a substantial risk that impacts of agricultural expansion may offset some of the benefits of ambitious climate protection for ecosystems.

  6. Dormaier and Chester Butte 2007 Follow-up Habitat Evaluation Procedures Report.

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, Paul R.

    2008-01-01

    Follow-up habitat evaluation procedures (HEP) analyses were conducted on the Dormaier and Chester Butte wildlife mitigation sites in April 2007 to determine the number of additional habitat units to credit Bonneville Power Administration (BPA) for providing funds to enhance, and maintain the project sites as partial mitigation for habitat losses associated with construction of Grand Coulee Dam. The Dormaier follow-up HEP survey generated 482.92 habitat units (HU) or 1.51 HUs per acre for an increase of 34.92 HUs over baseline credits. Likewise, 2,949.06 HUs (1.45 HUs/acre) were generated from the Chester Butte follow-up HEP analysis for an increase of 1,511.29 habitat units above baseline survey results. Combined, BPA will be credited with an additional 1,546.21 follow-up habitat units from the Dormaier and Chester Butte parcels.

  7. Geology of Pine and Crater Buttes: two basaltic constructs on the far eastern Snake River Plain

    International Nuclear Information System (INIS)

    Mazierski, P.F.; King, J.S.

    1987-01-01

    The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets

  8. Optimization and Prediction of Angular Distortion and Weldment Characteristics of TIG Square Butt Joints

    Science.gov (United States)

    Narang, H. K.; Mahapatra, M. M.; Jha, P. K.; Biswas, P.

    2014-05-01

    Autogenous arc welds with minimum upper weld bead depression and lower weld bead bulging are desired as such welds do not require a second welding pass for filling up the upper bead depressions (UBDs) and characterized with minimum angular distortion. The present paper describes optimization and prediction of angular distortion and weldment characteristics such as upper weld bead depression and lower weld bead bulging of TIG-welded structural steel square butt joints. Full factorial design of experiment was utilized for selecting the combinations of welding process parameter to produce the square butts. A mathematical model was developed to establish the relationship between TIG welding process parameters and responses such as upper bead width, lower bead width, UBD, lower bead height (bulging), weld cross-sectional area, and angular distortions. The optimal welding condition to minimize UBD and lower bead bulging of the TIG butt joints was identified.

  9. Paris INDCs: will they achieve the goal of the Paris Climate Agreement?

    Science.gov (United States)

    Tribett, W. R.; Salawitch, R. J.; Hope, A. P.; Bennett, B.; Canty, T. P.

    2016-12-01

    We provide an overview of the Intended Nationally Determined Contributions (INDCs) submitted prior to the 21st meeting of the Conference of the Parties to the United Nations Framework Convention on Climate Change, which are the backbone of the Paris Climate Agreement. Two flavors of INDCs were submitted: unconditional (i.e., firm commitments) and conditional (commitments contingent on financial flow and/or technology transfer). Generally, the Paris INDCs extend to year 2030. However, achievement of either the target (1.5 °C warming) or upper limit (2.0 °C warming) of the Paris Agreement requires consideration of emissions out to 2060, due to the projected rise in energy demand, growing populations, and rising standards of living. We therefore project global carbon emissions out to year 2060, and compare to various RCP scenarios of IPCC (2013). These projections will be used to assess whether the target (1.5 °C warming) or upper limit (2.0 °) of the Paris Climate Agreement will be met.

  10. 75 FR 60804 - Notice of Availability of the Final Environmental Impact Statement for the West Butte Wind Power...

    Science.gov (United States)

    2010-10-01

    ... Wind Power Right-of-Way, Crook and Deschutes Counties, OR AGENCY: Bureau of Land Management, Interior... Final Environmental Impact Statement (EIS) for the West Butte Wind Power Right-of-Way and by this Notice... Register notice. FOR FURTHER INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right of Way...

  11. 77 FR 61020 - Notice of Availability of Final Environmental Impact Statement for the Sigurd to Red Butte No. 2...

    Science.gov (United States)

    2012-10-05

    ...; UTU-83067] Notice of Availability of Final Environmental Impact Statement for the Sigurd to Red Butte... (BLM) has prepared a Final Environmental Impact Statement (EIS) for the Sigurd to Red Butte No. 2--345...; Utah School and Institutional Trust Lands Administration; Millard, Sevier, Beaver, Iron, and Washington...

  12. 77 FR 10773 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of...

    Science.gov (United States)

    2012-02-23

    ... Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Scheduling of Expedited Five-Year... orders on stainless steel butt-weld pipe fittings from Italy, Malaysia, and the Philippines would be... certificate of service. Determination.--The Commission has determined to exercise its authority to extend the...

  13. 76 FR 67146 - Stainless Steel Butt-Weld Pipe Fittings From Italy; Extension of Time Limit for Preliminary...

    Science.gov (United States)

    2011-10-31

    ... DEPARTMENT OF COMMERCE International Trade Administration [A-475-828] Stainless Steel Butt-Weld... antidumping duty order on stainless steel butt-weld pipe fittings from Italy in the Federal Register. See... preliminary results of this review within the original time frame because it needs to obtain additional...

  14. A parametric study of residual stresses in multipass butt-welded stainless steel pipes

    Energy Technology Data Exchange (ETDEWEB)

    Brickstad, B. [SAQ Inspection Ltd., Stockholm (Sweden); Josefson, L. [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Solid Mechanics

    1996-06-01

    Multipass circumferential butt-welding of stainless steel pipes is simulated numerically in a non-linear thermo-mechanical FE-analysis. In particular, the through-thickness variation at the weld and heat affected zone, of the axial and hoop stresses and their sensitivity to variation in weld parameters are studied. Recommendations are given for the through thickness variation of the axial and hoop stresses to be used when assessing the growth of surface flaws at circumferential butt welds in nuclear piping system. 31 refs, 12 tabs, 54 figs.

  15. Et cigaretskod, en donation, en renere by: A cigarette butt, a donation, a cleaner city

    OpenAIRE

    Bengtsen, Monica; Patursson, Guttormur; Nedergaard, Sofie Tarpø; Madsen, Maria Chas; Drews, Anna Ørsted; Bach, Katrine Møller

    2013-01-01

    This project concerns an explanation of the problem of cigarette butts lying in the streets of Copenhagen. By using elements of the theory of nudging we have designed an ashtray ment to pledge smokers not to throw their butt in the streets. The design is a response to a design competition published by the municipality of Copenhagen, as an attempt to be the cleanest capital in Europe by the year 2015. The core of the design presentation is in cooperation with private firms, who have obligated ...

  16. A origem da Universidade de Paris (I

    Directory of Open Access Journals (Sweden)

    Ruy Afonso da Costa Nunes

    1967-03-01

    Foi no princípio do século XIII que a Universidade começou a organizar-se . Em 1200, por um privilégio outorgado por Filipe Augusto, a corporação dos professôres e dos estudantes de Paris passou a reger-se pela jurisdição eclesiástica, furtando-se dessa maneira ao fôro civil. Em 1215, Roberto de Courçon, legado pontifício, conce-deu ao studium parisiense seus primeiros estatutos oficiais . Se tais medidas constituíram o início da organização jurídica da Universidade, foram, por outro lado, o remate de um lento processo de formação . Mas, como decorreu êsse movimento germinativo da Universidade de Paris? Que condições o prepararam e que fatôres contri-buíram para sua gênese e desenvolvimento?

  17. Analysis and Prediction of the Billet Butt and Transverse Weld in the Continuous Extrusion Process of a Hollow Aluminum Profile

    Science.gov (United States)

    Lou, Shumei; Wang, Yongxiao; Liu, Chuanxi; Lu, Shuai; Liu, Sujun; Su, Chunjian

    2017-08-01

    In continuous extrusions of aluminum profiles, the thickness of the billet butt and the length of the discarded extrudate containing the transverse weld play key roles in reducing material loss and improving product quality. The formation and final distribution of the billet butt and transverse weld depend entirely on the flow behavior of the billet skin material. This study examined the flow behavior of the billet skin material as well as the formation and evolution of the billet butt and the transverse weld in detail through numerical simulation and a series of experiments. In practical extrusions, even if the billet skin is removed by lathe turning shortly before extrusion, billet skin impurities are still distributed around the transverse weld and in the billet butt. The thickness of the scrap billet butt and the length of the discarded extrudate containing the transverse weld can be exactly predicted via simulation.

  18. 76 FR 43341 - Notice of Availability of the Record of Decision for the West Butte Wind Power Right-of-Way...

    Science.gov (United States)

    2011-07-20

    ... LVRWH09H0600; HAG 10-0338] Notice of Availability of the Record of Decision for the West Butte Wind Power Right... INFORMATION CONTACT: Steve Storo, BLM West Butte Wind Power Right-of-Way Project Lead: telephone (541) 416... INFORMATION: The applicant, West Butte Wind Power, LLC, filed right-of-way (ROW) application OR-065784 to...

  19. Le savoir-faire local dans la valorisation alimentaire des fruits du safoutier (Dacryodes edulis (G. Don H.J. Lam au Cameroun

    Directory of Open Access Journals (Sweden)

    Noumi, GB.

    2006-01-01

    Full Text Available The Local Know-how in the Valorisation of (Dacryodes edulis (G. Don H.J. Lam Fruits in Cameroon. Dacryodes edulis (G. Don H.J. Lam (Burseraceae is an oleaginous plant highly appreciated in the forest zone of Cameroon. This tree yields fruits called african pear or safou, highly consumed by local populations and even abroad. African pear is at the centre of a great economic activity in the Central Africa subregion as its trade generates cash for local traders during the production period. However, the valorisation of african pear is hindered by its high perishable nature responsible for important post-harvest losses due to lack of proper post-harvest handling. Some studies addressed the problem, unfortunately, nothing was done on the local know-how which has still to be investigated. The present paper sheds light on african pear local harvesting, handling and marketing practices in Cameroon. Field surveys were carried out in different production zones in Cameroon savannah and humid forest lowlands: Adamawa, centre, east, littoral and west provinces. Results showed that african pear occupies an important place in the population daily life. This multipurpose tree specie appears to be a source of foodstuffs, cash income, drugs and wood. If, on one hand diverse strategies are developed by the population for a proper conservation of fruits, on the other hand there is not a real fruits transformation activity. Results of this study highlight the traditional know-how and bring out prospects for future works on african pear valorisation.

  20. Pariisi kord = Paris' move / João Francisco Figueira

    Index Scriptorium Estoniae

    Figueira, João Francisco, 1968-

    2009-01-01

    Pariisi nõustamisprojektide rahvusvahelisest võistlusest "Le Grand Pari(s)". Sooviti saada julget ja elluviidavat projekti Pariisi arenguks aastani 2050. Osales kümme kutsutud arhitektide, planeerijate ja ekspertide töörühma. Osade tööde mõningaid aspekte tutvustav käsitlus

  1. PARIS II: Computer Aided Solvent Design for Pollution Prevention

    Science.gov (United States)

    This product is a summary of U.S. EPA researchers' work developing the solvent substitution software tool PARIS II (Program for Assisting the Replacement of Industrial Solvents, version 2.0). PARIS II finds less toxic solvents or solvent mixtures to replace more toxic solvents co...

  2. Modeling and control of a DC upset resistance butt welding process

    NARCIS (Netherlands)

    Naus, G.J.L.; Meulenberg, R.; Molengraft, van de M.J.G.

    2007-01-01

    This paper presents the analysis and synthesis of modeling and control of the DC upset resistance butt welding process used in rim production lines. A new control strategy is developed, enabling active control of the welding seam temperature and the upset size. As a result, set-up times and energy

  3. Gap Width Study and Fixture Design in Laser Butt-Welding

    DEFF Research Database (Denmark)

    Gong, Hui; Olsen, Flemming Ove

    .5-2.0 m/min, the laser power : 2 and 2.6 kW and the focal point position : 0 and -1.2 mm. Quality of all the butt welds are destructively tested according to ISO 13919-1.Influences of the variable process parameters to the maximum allowable gap width are observed as (1) the maximum gap width is inversely......This paper discusses some practical consideration for design of a mechanical fixture, which enables to accurately measure the width of a gap between two stainless steel workpieces and to steadfastly clamp the workpieces for butt-welding with a high power CO2 laser.With such a fixture, a series...... of butt-welding experiment is successfully carried out in order to find the maximum allowable gap width in laser butt-welding. The gap width study (GWS) is performed on the material of SST of W1.4401 (AISI 316) under various welding conditions, which are the gap width : 0.00-0.50 mm, the welding speed : 0...

  4. TIG-dressing of High Strength Butt Welded Connection. Part 2 : Physical Testing and Modelling

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  5. TIG-dressing of high strength butt welded connection - Part 2: physical testing and modelling

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    Weld improvement techniques are aimed at reducing the notch effects of welds and generally focus on two aspects: a change of geometry of the weld toe and a change of the weld residual stresses. In this paper, fatigue tests are discussed, performed on butt welded specimens in steel grades ranging

  6. Characterizing butt-rot fungi on USA-affiliated islands in the western Pacific

    Science.gov (United States)

    Phil Cannon; Ned B. Klopfenstein; Robert L. Schlub; Mee-Sook Kim; Yuko Ota; Norio Sahashi; Roland J. Quitugua; John W. Hanna; Amy L. Ross-Davis; J. D. Sweeney

    2014-01-01

    Ganoderma and Phellinus are genera that commonly cause tree butt-rot on USA-affiliated islands of the western Pacific. These fungal genera can be quite prevalent, especially in older mangrove stands. Although the majority of infections caused by these fungi lead to severe rotting of the heartwood, they typically do not directly kill the living tissues of the sapwood,...

  7. Ultrasonic wave propagation in real-life austenitic V-butt welds: Numerical modeling and validation

    International Nuclear Information System (INIS)

    Hannemann, R.; Marklein, R.; Langenberg, K. J.; Schurig, C.; Koehler, B.; Walte, F.

    2000-01-01

    In nondestructive testing the evaluation of austenitic steel welds with ultrasound is a commonly used method. But, since the wave propagation, scattering, and diffraction effects in such complicated media are hardly understood, computer simulations are very helpful to increase the knowledge of the physical phenomena in such samples. A particularly powerful numerical time domain modeling tool is the well established Elastodynamic Finite Integration Technique (EFIT). Recently, EFIT has been extended to simulate elastic waves in inhomogeneous anisotropic media. In this paper, the step-by-step evaluation of ultrasonic wave propagation in inhomogeneous anisotropic media will be described and the results will be validated against measurements. As a simplified model, a V-butt weld with perpendicular grain structure is investigated. The coincidence between the B Scans of the simulation and the measurement of an idealized V-butt weld is remarkable and even effects predicted by theory and simulation - the appearance of two coupled quasi-SV waves - can be observed. As a next step, an improved and more realistic model of the grain orientation inside the V-butt weld is introduced. This model has been implemented in the EFIT code and has been validated against measurements. For this verification, measured and simulated B-Scans for a real-life V-butt weld have been compared and a significant coincidence has been observed. Furthermore, the main pulses in the B-Scans are interpreted by analyzing the snapshot-movies of the wavefronts

  8. 77 FR 13072 - Salmon-Challis National Forest, Butte, Custer and Lemhi Counties, ID, Supplemental Environmental...

    Science.gov (United States)

    2012-03-05

    ... DEPARTMENT OF AGRICULTURE Forest Service Salmon-Challis National Forest, Butte, Custer and Lemhi Counties, ID, Supplemental Environmental Impact Statement to the 2009 Salmon- Challis National Forest... of intent to prepare a supplemental environmental impact statement. SUMMARY: The Salmon-Challis...

  9. Geology of the Pumpkin Buttes Area of the Powder River Basin, Campbell and Johnson Counties, Wyoming

    Science.gov (United States)

    Sharp, William Neil; White, Amos McNairy

    1956-01-01

    About 200 uranium occurrences have been examined in the Pumpkin Buttes area, Wyoming. Uranium minerals are visible at most of these places and occur in red and buff sandstone lenses in the Wasatch formation of Eocene age. The uranium minerals are disseminated in buff sandstone near red sandstone, and also occur in red sandstone in manganese oxide concretions and uraninite concretions.

  10. A study of fatigue life distribution of butt-welded joints

    International Nuclear Information System (INIS)

    Sakai, Tatsuo; Fujitani, Keizo; Kikuchi, Toshiro; Tanaka, Takao.

    1981-01-01

    Various kinds of welded joints are being used in many structures such as ships, bridges and constructions. It is important in reliability analysis of such structures to clarify the statistical fatigue property of the welded joints. In this study, fatigue tests were carried out on the butt-welded joints of SM50A steel and a theoretical interpretation on the fatigue life distribution was attempted, assuming that a butt-welded joint is composed of a number of sliced specimens with different fatigue strengths. Main results obtained are summarized as follows; (1) The median crack initiation life of the butt-welded joint specimens coincided with that of the sliced specimens, when the crack initiation was defined by a 0.2 mm crack in the sliced specimens or the equivalent state of stress intensity factor in the joint specimens. (2) The distribution of crack initiation lives of the butt-welded joints can be theoretically derived by combining the concept of extreme distribution and the distribution model on the number of fatigue cracks. The theoretical distribution of crack initiation lives of the joints is in good agreement with the general trend of the experimental results. (3) If the distribution of crack initiation lives and the crack growth law are given experimentally, one can obtain analytically the distribution of final fatigue lives. The fatigue life distribution of the sliced specimens can be explained by the theory established in this study. (author)

  11. Teacher's Guide to Architectural Styles. Skinner's Butte Historical District. Revised Edition.

    Science.gov (United States)

    Bauer, Mary; Neimand, Hahn

    This document is a teacher's guide to the historic buildings of Eugene, Oregon. Eighteen buildings in the Skinner's Butte Historical District are highlighted, including the U.S. Post Office, the Eagles Building, the Lane Hotel, the Oregon Electric Depot, the Southern Pacific Railroad Depot, and several houses. For each structure there is a brief…

  12. Can the Paris Agreement stop global warming?

    DEFF Research Database (Denmark)

    Howalt Owe, Selina; Pedersen, Jens Olaf Pepke

    in the year 2030 of about 55 Gt Carbon to 40 Gt Carbon. This can be compared to an approximate emission of 35 Gt in 2014 and thus means that a global rise in emission of only 5 Gt Carbon is allowed over the next 15 years Using the Danish Center for Earth System Science (DCESS)model [1] we have investigated...... how large an emission reduction is necessary to keep the global temperatures below these targets.The DCESS model is a low order Earth system box model which includes atmosphere, ocean, ocean sediment, land biosphere and lithosphere components, and using the year 1765 as the preindustriallevel. We have...... examined different emission scenarios and the national commitments and find that even if the Paris Agreement is fulfilled, global temperatures will have increased by 1.5 degree C in 2030, and then only a yearly percentage reduction of 5% or more will be sufficient to keep temperatures below 2 degree C...

  13. Origin of the Societe des Americanistes, Paris

    Directory of Open Access Journals (Sweden)

    David L. Browman

    1998-11-01

    Full Text Available Pascal Riviale (1991 produced a two volume dissertation summarizing the work of French scholars involved in anthropology, ethnography, and archaeology in Peru from the beginning of Peruvian independence in 1821 up until World War 1. From the commentary, it is clear that not only does this volume trace individual scholars, and institu­tions involved in archaeologically-related research, but it develops a number of general intellectual themes as well. Riviale has recently (1996 extracted a portion of his dissertation relating to the events leading up to the founding of the Society of Americanists, Paris, in 1895. Because he is focusing in this case on the origin of a specific organiza­tion, he concentrates on exegesis of the institutional antecedents from 1821 onward.

  14. Ocean commitments under the Paris Agreement

    Science.gov (United States)

    Gallo, Natalya D.; Victor, David G.; Levin, Lisa A.

    2017-11-01

    Under the Paris Agreement nations made pledges known as nationally determined contributions (NDCs), which indicate how national governments are evaluating climate risks and policy opportunities. We find that NDCs reveal important systematic patterns reflecting national interests and capabilities. Because the ocean plays critical roles in climate mitigation and adaptation, we created a quantitative marine focus factor (MFF) to evaluate how governments address marine issues. In contrast to the past, when oceans received minimal attention in climate negotiations, 70% of 161 NDCs we analysed include marine issues. The percentage of the population living in low-lying areas--vulnerable to rising seas--positively influences the MFF, but negotiating group (Annex 1 or small island developing states) is equally important, suggesting political motivations are crucial to NDC development. The analysis reveals gaps between scientific and government attention, including on ocean deoxygenation, which is barely mentioned. Governments display a keen interest in expanding marine research on climate priorities.

  15. Paris Convention on third party liability in the field of nuclear energy and Brussels Convention Supplementary to the Paris Convention

    International Nuclear Information System (INIS)

    1989-01-01

    This new bilingual (English and French) edition of the 1960 Paris Convention and 1963 Brussels Supplementary Convention incorporates the provisions of the Protocols which amended each of them on two occasions, in 1964 and 1982. The Expose des motifs to the Paris Convention, as revised in 1982 is also included in this pubication. (NEA) [fr

  16. Paris 2000 researches and men; Paris 2000 des recherches et des hommes

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The IWA and ISWA congresses organized in Paris in july showed the latest research developments in the field of water and wastes management. The water sector is more mature than the waste sector but for both a closer association of the public and private is increasing. A summary of the presentations in successively the water and the wastes management is proposed bringing an analysis of the international situation and regulations. (A.L.B.)

  17. Cigarettes Butts and the Case for an Environmental Policy on Hazardous Cigarette Waste

    Directory of Open Access Journals (Sweden)

    Richard Barnes

    2009-05-01

    Full Text Available Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell ‘safe’ cigarettes. They are perceived by much of the public (especially current smokers to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  18. Cigarettes butts and the case for an environmental policy on hazardous cigarette waste.

    Science.gov (United States)

    Novotny, Thomas E; Lum, Kristen; Smith, Elizabeth; Wang, Vivian; Barnes, Richard

    2009-05-01

    Discarded cigarette butts are a form of non-biodegradable litter. Carried as runoff from streets to drains, to rivers, and ultimately to the ocean and its beaches, cigarette filters are the single most collected item in international beach cleanups each year. They are an environmental blight on streets, sidewalks, and other open areas. Rather than being a protective health device, cigarette filters are primarily a marketing tool to help sell 'safe' cigarettes. They are perceived by much of the public (especially current smokers) to reduce the health risks of smoking through technology. Filters have reduced the machine-measured yield of tar and nicotine from burning cigarettes, but there is controversy as to whether this has correspondingly reduced the disease burden of smoking to the population. Filters actually may serve to sustain smoking by making it seem less urgent for smokers to quit and easier for children to initiate smoking because of reduced irritation from early experimentation. Several options are available to reduce the environmental impact of cigarette butt waste, including developing biodegradable filters, increasing fines and penalties for littering butts, monetary deposits on filters, increasing availability of butt receptacles, and expanded public education. It may even be possible to ban the sale of filtered cigarettes altogether on the basis of their adverse environmental impact. This option may be attractive in coastal regions where beaches accumulate butt waste and where smoking indoors is increasingly prohibited. Additional research is needed on the various policy options, including behavioral research on the impact of banning the sale of filtered cigarettes altogether.

  19. Effects of the application of different window functions and projection methods on processing of 1H J-resolved nuclear magnetic resonance spectra for metabolomics

    International Nuclear Information System (INIS)

    Tiziani, Stefano; Lodi, Alessia; Ludwig, Christian; Parsons, Helen M.; Viant, Mark R.

    2008-01-01

    Two dimensional (2D) homonuclear 1 H J-resolved (JRES) nuclear magnetic resonance spectroscopy is increasingly used in metabolomics. This approach visualises metabolite chemical shifts and scalar couplings along different spectral dimensions, thereby increasing peak dispersion and facilitating spectral assignments and accurate quantification. Here, we optimise the processing of 2D JRES spectra by evaluating different window functions, a traditional sine-bell (SINE) and a combined sine-bell-exponential (SEM) function. Furthermore, we evaluate different projection methods for generating 1D projected spectra (pJRES). Spectra were recorded from three disparate types of biological samples and evaluated in terms of sensitivity, reproducibility and resolution. Overall, the SEM window function yielded considerably higher sensitivity and comparable spectral reproducibility and resolution compared to SINE, for both 1D pJRES and 2D JRES datasets. Furthermore, for pJRES spectra, the highest spectral quality was obtained using SEM combined with skyline projection. These improvements lend further support to utilising 2D J-resolved spectroscopy in metabolomics

  20. Small-scale variations of climate change in mountainous forested terrain - a regional study from H.J. Andrews Long Term Ecological Research site in Oregon, USA

    Science.gov (United States)

    Honzakova, Katerina; Hoffmann, Peter; Jones, Julia; Thomas, Christoph

    2017-04-01

    There has been conflicting evidence as to whether high elevations are experiencing more pronounced climate warming than lower elevations in mountainous regions. In this study we analyze temperature records from H.J. Andrews Long Term Ecological Research, Oregon, USA and several nearby areas, comprising together 28 stations located in Cascade Mountains. The data, starting in 1958, are first checked for quality and homogenized using the Standard Normal Homogeneity Test. As a reference, composite climate time series based on the Global Historic Climate Network is created and together with cross-referencing against station records used to correct breaks and shifts in the data. In the next step, we investigate temperature patterns of the study site from 1958 to 2016 and compare them for valley and hill stations. In particular, we explore seasonality and inter-annual variability of the records and trends of the last day of frost. Additionally, 'cold' sums (positive and negative) are calculated to obtain a link between temperature and ecosystems' responses (such as budbreaks). So far, valley stations seem to be more prone to climate change than ridge or summit stations, contrary to current thinking. Building on previous knowledge, we attempt to provide physical explanations for the temperature records, focusing on wind patterns and associated phenomena such as cold air drainage and pooling. To aid this we analyze wind speed and direction data available for some of the stations since 1996, including seasonality and inter-annual variability of the observed flows.

  1. Herbert Marcuse vai a Paris, Texas

    Directory of Open Access Journals (Sweden)

    Patrick Pessoa

    2008-06-01

    Full Text Available Este ensaio fornece uma interpretação do filme Paris, Texas, de Wim Wenders, à luz da dialética da civilização como apresentada por Herbert Marcuse em Eros e civilização: uma interpretação filosófica do pensamento de Freud. Para que a “aplicação” do pensamento de Marcuse ao filme de Wenders não soterre a obra de arte com filosofemas previamente existentes e de uso disseminado, o contato entre a imagem do cineasta e a palavra do filósofo acontece em uma via de mão dupla. Assim, se a princípio a caracterização marcuseana da dialética entre a pulsão erótica e as demandas da civilização serve para articular algumas das imagens do filme de Wenders, tentamos mostrar, no final de nosso percurso, como o filme de Wenders permite a formulação de algumas questões que tornam visível o quanto o próprio Marcuse negligenciou uma das principais contribuições de Freud para a reflexão estética: a relação essencial entre a pulsão de morte e a negatividade da arte.

  2. California Air Quality State Implementation Plans; Final Approval; Butte County Air Quality Management District; Stationary Source Permits

    Science.gov (United States)

    EPA is taking final action to approve a revision to the Butte County Air Quality Management District (BCAQMD) portion of the California State Implementation Plan (SIP). This revision concerns the District's New Source Review (NSR) permitting program.

  3. Paris, Texas. Saksamaal ja sinu peas / Kairi Prints

    Index Scriptorium Estoniae

    Prints, Kairi

    2010-01-01

    6.- 12. oktoobrini Tallinnas ja Tartus toimuval filmifestivalil "Uus Saksa Kino" saab vaadata Wim Wendersi muusikadokumentaale. "Film ja filosoofia" rubriigis koha- ja rahvusespetsiifika eksistentsist tänapäeva filmikunstis ja W. Wendersi filmist "Paris, Texas" (USA 1984)

  4. Turning Paris into reality at the University of California

    Science.gov (United States)

    Victor, David G.; Abdulla, Ahmed; Auston, David; Brase, Wendell; Brouwer, Jack; Brown, Karl; Davis, Steven J.; Kappel, Carrie V.; Meier, Alan; Modera, Mark; Zarin Pass, Rebecca; Phillips, David; Sager, Jordan; Weil, David; TomKat Natural Gas Exit Strategies Working Group

    2018-03-01

    The Paris Agreement highlights the need for local climate leadership. The University Of California's approach to deep decarbonization offers lessons in efficiency, alternative fuels and electrification. Bending the emissions curve globally requires efforts that blend academic insights with practical solutions.

  5. Development of radiographic technique for examining k-type butt weld

    International Nuclear Information System (INIS)

    Barui, K.L.; Bhattacharyya, B.

    1983-01-01

    An attempt is made to develop a radiographic technique for examining K-type full penetration butt joints in heavy duty crane girders. The existing standard techniques of radiographic examination is found to be unsuitable to assess the internal defects properly. The examination technique reported here is successful in detecting not only the nature of the internal defects but also their degree of severities - from which clues for avoiding the most probable defects can be found out. The results of radiographic examination applied on the K-type butt joints of heavy duty crane girders have been discussed and it is specified that the acceptable limit of the defects must lie between 'blue' and 'green' according to the IIW colour code. Much work is yet to be done before standard specifications regarding the acceptibility of the defects in the actual job can be formulated. (author)

  6. A new method to butt weld pipes with laser at different angles

    International Nuclear Information System (INIS)

    Gualini, M.M.S.

    1999-01-01

    Laser butt welding of pipes at different angles may be cumbersome and may require very expensive tooling. The pipe size may not allow using the laser for large volume throughputs. We propose a rotary optical head composed by an adjustable focus lens system and two reflecting mirrors. The laser beam is bent at 90 deg. C. so that weld can be performed inwards outwards. The optic head design compensates the rotary backlash and vibrations, like a penta prism thus ensuring a perfect follow up of the weld track. The optic head can be inclined at 45 deg. C. to laser butt weld pipe each other at 90 deg. C. In this case the laser beam focus position is computer controlled in order to keep the focus point always on the elliptical weld profile. The paper covers theoretical and practical aspects of the proposed device. (author)

  7. Wrought stainless steel butt-welding fittings: including reference to other corrosion resistant materials - approved 1971

    International Nuclear Information System (INIS)

    Anon.

    1975-01-01

    ANSI B16.9 is the American Standard for steel butt-welding fittings and although not so stated, it is implied that its scope deals primarily with the schedules of wall thicknesses which are common to carbon steel and the grades of alloy steel piping that are selected for pressure and temperature considerations. The purpose of this standard is to provide industry with a set of dimensional standards for butt-welding fittings that can be used with these light wall pipes of corrosion resisting materials. The center-to-end dimensions of all fittings are identical with those in ANSI B16.9 which give to industry the advantage of uniform design room practice and a maximum utilization of existing die equipment. The only departure from this is in the lap-joint stub end where for purposes of economy the face-to-end of the product has been reduced for use with thin wall piping

  8. Vision and spectroscopic sensing for joint tracing in narrow gap laser butt welding

    Science.gov (United States)

    Nilsen, Morgan; Sikström, Fredrik; Christiansson, Anna-Karin; Ancona, Antonio

    2017-11-01

    The automated laser beam butt welding process is sensitive to positioning the laser beam with respect to the joint because a small offset may result in detrimental lack of sidewall fusion. This problem is even more pronounced in case of narrow gap butt welding, where most of the commercial automatic joint tracing systems fail to detect the exact position and size of the gap. In this work, a dual vision and spectroscopic sensing approach is proposed to trace narrow gap butt joints during laser welding. The system consists of a camera with suitable illumination and matched optical filters and a fast miniature spectrometer. An image processing algorithm of the camera recordings has been developed in order to estimate the laser spot position relative to the joint position. The spectral emissions from the laser induced plasma plume have been acquired by the spectrometer, and based on the measurements of the intensities of selected lines of the spectrum, the electron temperature signal has been calculated and correlated to variations of process conditions. The individual performances of these two systems have been experimentally investigated and evaluated offline by data from several welding experiments, where artificial abrupt as well as gradual deviations of the laser beam out of the joint were produced. Results indicate that a combination of the information provided by the vision and spectroscopic systems is beneficial for development of a hybrid sensing system for joint tracing.

  9. A Vision-Aided 3D Path Teaching Method before Narrow Butt Joint Welding.

    Science.gov (United States)

    Zeng, Jinle; Chang, Baohua; Du, Dong; Peng, Guodong; Chang, Shuhe; Hong, Yuxiang; Wang, Li; Shan, Jiguo

    2017-05-11

    For better welding quality, accurate path teaching for actuators must be achieved before welding. Due to machining errors, assembly errors, deformations, etc., the actual groove position may be different from the predetermined path. Therefore, it is significant to recognize the actual groove position using machine vision methods and perform an accurate path teaching process. However, during the teaching process of a narrow butt joint, the existing machine vision methods may fail because of poor adaptability, low resolution, and lack of 3D information. This paper proposes a 3D path teaching method for narrow butt joint welding. This method obtains two kinds of visual information nearly at the same time, namely 2D pixel coordinates of the groove in uniform lighting condition and 3D point cloud data of the workpiece surface in cross-line laser lighting condition. The 3D position and pose between the welding torch and groove can be calculated after information fusion. The image resolution can reach 12.5 μm. Experiments are carried out at an actuator speed of 2300 mm/min and groove width of less than 0.1 mm. The results show that this method is suitable for groove recognition before narrow butt joint welding and can be applied in path teaching fields of 3D complex components.

  10. Summary of investigations of uranium deposits in the Pumpkin Buttes area, Johnson and Campbell Counties, Wyoming

    Science.gov (United States)

    Troyer, Max L.; McKay, Edward J.; Soister, Paul E.; Wallace, Stewart R.

    1954-01-01

    Uranium minerals were discovered in the Pumpkin Buttes area, Campbell and Johnson Counties, Wyo., by the U. S. Geological Survey in October 1951. From June to November 1952, an area of about 750 square miles was examined for uranium deposits, and 211 localities having abnormally high radioactivity were found; uranium minerals are visible at 121 of these localities. All known uranium mineralization in the area is restricted to sandstones of the Wasatch formation, except sparsely disseminated uranium in the sandstone of the White River formation, which caps the Pumpkin Buttes, mid several localities on the Great Pine Ridge southwest of the Pumpkin Buttes where iron-saturated sandstone and clinker in the Fort Union formation have above-normal radioactivity. The uranium occurrences in the Wasatch formation are in a red sandstone zone 450 to 900 feet above the base of the formation and are of two types: small concretionary masses of uranium, iron, manganese and vanadium minerals in sandstone, and irregular zones in which uranium minerals are disseminated in sandstone. The second type is usually larger but of lower grade than the first. Most of the localities at which uranium occurs are in a north-trending belt about 60 miles long and 18 miles in maximum width.

  11. A Demonstration System for Capturing Geothermal Energy from Mine Waters beneath Butte, Montana

    Energy Technology Data Exchange (ETDEWEB)

    Blackketter, Donald [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-06-01

    Executive Summary An innovative 50-ton ground-source heat pump (GSHP) system was installed to provide space heating and cooling for a 56,000 square foot (5,200 square meter) building in Butte Montana, in conjunction with its heating and chiller systems. Butte is a location with winter conditions much colder than the national average. The GSHP uses flooded mine waters at 78F (25C) as the heat source and heat sink. The heat transfer performance and efficiency of the system were analyzed using data from January through July 2014. This analysis indicated that for typical winter conditions in Butte, Montana, the GSHP could deliver about 88% of the building’s annual heating needs. Compared with a baseline natural-gas/electric system, the system demonstrated at least 69% site energy savings, 38% source energy savings, 39% carbon dioxide emissions reduction, and a savings of $17,000 per year (40%) in utility costs. Assuming a $10,000 per ton cost for installing a production system, the payback period at natural gas costs of $9.63/MMBtu and electricity costs of $0.08/kWh would be in the range of 40 to 50 years. At higher utility prices, or lower installation costs, the payback period would obviously be reduced.

  12. The Paris Observatory has 350 years

    Science.gov (United States)

    Lequeux, James

    2017-01-01

    The Paris Observatory is the oldest astronomical observatory that has worked without interruption since its foundation to the present day. The building due to Claude Perrault is still in existence with few modifications, but of course other buildings have been added all along the centuries for housing new instruments and laboratories. In particular, a large dome has been built on the terrace in 1847, with a 38-cm diameter telescope completed in 1857: both are still visible. The main initial purpose of the Observatory was to determine longitudes. This was achieved by Jean-Dominique Cassini using the eclipses of the satellites of Jupiter: a much better map of France was the produced using this method, which unfortunately does not work at sea. Incidentally, the observation of these eclipses led to the discovery in 1676 of the finite velocity of light by Cassini and Rømer. Cassini also discovered the differential rotation of Jupiter and four satellites of Saturn. Then, geodesy was to be the main activity of the Observatory for more than a century, culminating in the famous Cassini map of France completed around 1790. During the first half of the 19th century, under François Arago, the Observatory was at the centre of French physics, which then developed very rapidly. Arago initiated astrophysics in 1810 by showing that the Sun and stars are made of incandescent gas. In 1854, the new director, Urbain Le Verrier, put emphasis on astrometry and celestial mechanics, discovering in particular the anomalous advance of the perihelion of Mercury, which was later to be a proof of General Relativity. In 1858, Leon Foucault built the first modern reflecting telescopes with their silvered glass mirror. Le Verrier created on his side modern meteorology, including some primitive forecasts. The following period was not so bright, due to the enormous project of the Carte du Ciel, which took much of the forces of the Observatory for half a century with little scientific return. In

  13. From Paris to the End of Oil

    Directory of Open Access Journals (Sweden)

    Dag Harald Claes

    2016-09-01

    Full Text Available This article discusses the possibilities and obstacles for a cost-effective implementation of policies that will lead to a significant reduction in global CO2 emissions from the use of oil. The structural conditions and economic consequences of changing national or regional energy systems vary dramatically. In addition, there are a large number of actors with strong interests along the energy value chain that may potentially halt, delay or alter the implementation of the Paris treaty. We analyze these issues by first locating oil in the overall energy system, then identifying possibilities and obstacles at various stages of the oil value chain, and finally by contextualizing global oil by discussing whether and how it may be affected by geopolitics and regional conflict. In brief, our argument is that developments in consumption volumes and patterns will be most important. Market forces are vital, but they are influenced by politics and public policy outcomes. Transportation is the most important sector for oil consumption, with changes in transport behavior, modes and technology being vital drivers. The behavior of investors will be a decisive factor in shaping the production side of the oil system. If investments go down as a response to lasting low oil prices and/or because investors decide to turn to green economy options, the supply of oil will logically shrink. On the other hand, the growth and development aspirations of a rapidly growing population in developing countries are likely to stimulate demand and thus increase exploration, production and subsequently the price. Finally, we emphasize the importance of (geopolitics influencing all aspects of the value chain of oil.

  14. Hydrologic and forest management controls on DOC dynamics in the small watersheds of the H.J. Andrews Experimental Forest, OR

    Science.gov (United States)

    Lajtha, K.; Jones, J. A.

    2016-12-01

    Dissolved organic carbon (DOC) export from hillslopes to streams is an important component of the carbon cycle of a catchment and may be a critical source of energy for the aquatic food web in receiving waters. Using a long-term record of DOC and other dissolved nutrients and elements from paired watersheds from the H.J. Andrews Experimental Forest in Oregon, we explored hydrologic, climatic, and land-use controls on seasonal and inter-annual patterns of DOC flux in a seasonally dry ecosystem. Seasonal patterns of DOC flux demonstrated source limitations to DOC export, with DOC concentrations highest immediately following the first rains after a dry summer, and lowest after winter rains. In contrast, more geochemically-controlled elements showed simple dilution-concentration patterns with no seasonal hysteresis. Inter-annual patterns of DOC flux, however, did not provide evidence of source limitation, with DOC flux within a watershed tightly correlated to total discharge but not temperature. Among watersheds, forest harvest, even over 50 years ago, significantly reduced DOC flux but not fluxes of other elements including N; this response was linked to the loading of coarse woody debris to the forest floor. Chemical fingerprinting of DOC revealed that old-growth watersheds had higher fluxes of DOC characteristic of forest floor organic materials, likely delivered to streams through more surficial preferential flow pathways not subject to microbial alteration, respiration, or sorption losses. Taken together these results suggest that the biogeochemical composition of forested streams reflects both current hydrologic patterns and also processes that occurred many decades ago within the catchment.

  15. Preliminary report: prescription of prism-glasses by the Measurement and Correction Method of H.-J. Haase or by conventional orthoptic examination: a multicenter, randomized, double-blind, cross-over study

    NARCIS (Netherlands)

    Simonsz, H. J.; van Els, J.; Ruijter, J. M.; Bakker, D.; Spekreijse, H.

    2001-01-01

    In a multicenter, randomized, double-blind, cross-over study in the Netherlands, the effectiveness of (prism-)glasses prescribed by the Measurement and Correction Method of H.-J. Haase (MKH) was compared to that of glasses prescribed by conventional orthoptic examination. Nine pairs of

  16. Chemical characteristics of saponins from Paris fargesii var. brevipetala and cytotoxic activity of its main ingredient, paris saponin H.

    Science.gov (United States)

    Wen, Feiyan; Yin, Hongxiang; Chen, Chu; Liu, Xianbo; Xue, Dan; Chen, Tiezhu; He, Jun; Zhang, Hao

    2012-06-01

    More attention was paid to the anti-tumor activity of Rhizoma Paridis (RP) recently, of which the wild resource was decreased significantly. This study was aimed to elucidate the chemical characteristics of Paris fargesii var. brevipetala (PFB) that may be administrated as alternate resource of legal RP. A HPLC-ELSD method was established to characterize the steroid saponins in rhizomes of PFB and two legal Paris species [Paris polyphylla var. chinensis (PPC) and P. polyphylla var. yunnanensis (PPY)] in Chinese Pharmacopoeia (CP). Ten saponins (paris saponins I, II, V, VI, VII, H, gracillin and other three paris saponins) were involved as standards. The results indicated that PFB contained pennogenyl saponins as the main components with small amounts of diosgenin saponins. The total contents of the detected saponins in PFB ranged from 9.12mg/g to 85.33mg/g. Nine of the twelve PFB samples own a total content of paris saponins I, II, VI, and VII more than 6.0mg/g (meeting the standard of CP 2010 edition). Principal Component Analysis (PCA) and Partial Least Squares-Discriminate Analysis (PLS-DA) both confirmed the fact that saponin profiles of PFB, PPC and PPY were different from each other. In addition, paris saponin H (Ps H), the predominant saponin of PFB (>50%), was tested in vitro to evaluate its cytotoxic activities on HepG2, A549, RPE and L929 cells with a positive control of Cisplatin. Ps H showed a remarkable cytotoxic activity on A549 cells with an IC(50) value of 1.53±0.08μg/mL. Copyright © 2012 Elsevier B.V. All rights reserved.

  17. Maio de 1968 em Paris: testemunho de um estudante Paris, May 1968: witness of a student

    Directory of Open Access Journals (Sweden)

    Michel Thiollent

    1998-10-01

    Full Text Available O objetivo deste artigo é apresentar informações sobre os acontecimentos de maio de 1968 na França e seus desdobramentos na vida universitária e intelectual. Os temas abordados são o contexto da crise universitária, as formas de contestação estudantil do ensino de ciências sociais e economia e as fontes intelectuais do movimento. Com base em documentos inéditos, são descritas diversas experiências de comunicação alternativa, de relacionamento entre estudantes e trabalhadores no decorrer dos acontecimentos, assim como uma tentativa de Universidade Popular no 13° distrito de Paris, de julho a outubro de 1968. São analisados alguns aspectos dos debates e da evolução das ciências sociais e da filosofia pós-68, período marcado pela crise do ideário socialista e pelo crescimento do individualismo.This article aims to present the happenigs occured in France in May 1968 and its consequences in the intelectual and university world. The topics are the context of the university crises, the forms of studants complaint against the teaching of Social Sciences and Economy and the intelectual sources of the movement. Based on unpublished documents, many experiences of alternative communication are described and the relationship between students and employees during the happenning and even an attempt to make a Popular University in the 13rd district of Paris, from July to October 1968, as well. Some aspects of the debates and the evolution of the Social Sciences and the Philosophy post 68 are analised. This period was remarked by the crises of the socialist set of ideas and the growth of the individualism.

  18. Incorporation of cigarette butts into nests reduces nest ectoparasite load in urban birds: new ingredients for an old recipe?

    Science.gov (United States)

    Suárez-Rodríguez, Monserrat; López-Rull, Isabel; Garcia, Constantino Macías

    2013-02-23

    Birds are known to respond to nest-dwelling parasites by altering behaviours. Some bird species, for example, bring fresh plants to the nest, which contain volatile compounds that repel parasites. There is evidence that some birds living in cities incorporate cigarette butts into their nests, but the effect (if any) of this behaviour remains unclear. Butts from smoked cigarettes retain substantial amounts of nicotine and other compounds that may also act as arthropod repellents. We provide the first evidence that smoked cigarette butts may function as a parasite repellent in urban bird nests. The amount of cellulose acetate from butts in nests of two widely distributed urban birds was negatively associated with the number of nest-dwelling parasites. Moreover, when parasites were attracted to heat traps containing smoked or non-smoked cigarette butts, fewer parasites reached the former, presumably due to the presence of nicotine. Because urbanization changes the abundance and type of resources upon which birds depend, including nesting materials and plants involved in self-medication, our results are consistent with the view that urbanization imposes new challenges on birds that are dealt with using adaptations evolved elsewhere.

  19. Wartime Paris, cirrhosis mortality, and the ceteris paribus assumption.

    Science.gov (United States)

    Fillmore, Kaye Middleton; Roizen, Ron; Farrell, Michael; Kerr, William; Lemmens, Paul

    2002-07-01

    This article critiques the ceteris paribus assumption, which tacitly sustains the epidemiologic literature's inference that the sharp decline in cirrhosis mortality observed in Paris during the Second World War derived from a sharp constriction in wine consumption. Paris's wartime circumstances deviate substantially from the "all else being equal" assumption, and at least three other hypotheses for the cirrhosis decline may be contemplated. Historical and statistical review. Wartime Paris underwent tumultuous changes. Wine consumption did decline, but there were, as well, a myriad of other changes in diet and life experience, many involving new or heightened hardships, nutritional, experiential, institutional, health and mortality risks. Three competing hypotheses are presented: (1) A fraction of the candidates for cirrhosis mortality may have fallen to more sudden forms of death; (2) alcoholics, heavy drinkers and Paris's clochard subpopulation may have been differentially likely to become removed from the city's wartime population, whether by self-initiated departure, arrest and deportation, or death from other causes, even murder; and (3) there was mismeasurement in the cirrhosis mortality decline. The alcohol-cirrhosis connection provided the template for the alcohol research effort (now more than 20 years old) aimed at re-establishing scientific recognition of alcohol's direct alcohol-problems-generating associations and causal responsibilities. In a time given to reports of weaker associations of the alcohol-cirrhosis connection, the place and importance of the Paris curve in the wider literature, as regards that connection, remains. For this reason, the Paris findings should be subjected to as much research scrutiny as they undoubtedly deserve.

  20. Paris-Princeton lectures on mathematical finance 2002

    CERN Document Server

    2003-01-01

    The Paris-Princeton Lectures in Financial Mathematics, of which this is the first volume, will, on an annual basis, publish cutting-edge research in self-contained, expository articles from outstanding - established or upcoming! - specialists. The aim is to produce a series of articles that can serve as an introductory reference for research in the field. It arises as a result of frequent exchanges between the finance and financial mathematics groups in Paris and Princeton. The present volume sets standards with articles by P. Bank/H. Föllmer, F. Baudoin, L.C.G. Rogers, and M. Soner/N. Touzi.

  1. USA Withdrawal from Paris Agreement – What Next?

    OpenAIRE

    Sergey Chestnoy; Dinara Gershinkova

    2017-01-01

    In June 2017, President Trump announced the USA’s withdrawal from the Paris Climate Accord, which had been ratified for less than a year, thanks in large part to the USA. That drastic shift followed the change in residency at the White House. Withdrawing from the Paris Accord presents an interesting topic for analysis. There’s the practical side of the withdrawal procedure as set out in Article 28 of the agreement, not to mention the consequences of US non-participation in address...

  2. Butt Weldability for SS400 Using Laser-Arc Hybrid Welding

    International Nuclear Information System (INIS)

    Kim, Jong Do; Myoung, Gi Hoon; Park, Duck; Myoung, Gi Hoon; Park, In Duck

    2016-01-01

    This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar

  3. Butt Weldability for SS400 Using Laser-Arc Hybrid Welding

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Do; Myoung, Gi Hoon; Park, Duck [Korea Maritime and Ocean Univ., Busan (Korea, Republic of); Myoung, Gi Hoon; Park, In Duck [Korea Institute of Machinery and Materials, Busan (Korea, Republic of)

    2016-07-15

    This study presents results of an experimental investigation of the laser-arc, hybrid, butt welding process of SS400 structural steel. Welding parameters including laser power, welding current and speed were varied in order to obtain one-pass, full-penetration welds without defects. The conditions that resulted in optimal beads were identified. After welding, hardness measurements and microstructure observations were carried out in order to study weld properties. The mechanical properties of both the base material and welded specimen were compared based on the results of tensile strength measurements. The yield and tensile strengths were found to be similar.

  4. Gas metal arc welding of butt joint with varying gap width based on neural networks

    DEFF Research Database (Denmark)

    Christensen, Kim Hardam; Sørensen, Torben

    2005-01-01

    penetration, when the gap width is varying during the welding process. The process modeling to facilitate the mapping from joint geometry and reference weld quality to significant welding parameters, has been based on a multi-layer feed-forward network. The Levenberg-Marquardt algorithm for non-linear least......This paper describes the application of the neural network technology for gas metal arc welding (GMAW) control. A system has been developed for modeling and online adjustment of welding parameters, appropriate to guarantee a certain degree of quality in the field of butt joint welding with full...

  5. TEM analysis of a friction stir-welded butt joint of Al-Si-Mg alloys

    International Nuclear Information System (INIS)

    Cabibbo, M.; Meccia, E.; Evangelista, E.

    2003-01-01

    The microstructure evolution of a joint of Al-Si-Mg alloys A6056-T4 and A6056-T6 has been characterized by transmission electron microscopy (TEM). Metallurgical investigations, hardness and mechanical tests were also performed to correlate the TEM investigations to the mechanical properties of the produced friction stir-welded butt joint. After friction stir-welding thermal treatment has been carried out at 530 deg. C followed by ageing at 160 deg. C (T6). The base material (T4) and the heat-treated one (T6) were put in comparison showing a remarkable ductility reduction of the joint after T6 treatment

  6. The geology of Pine and Crater Buttes: Two basaltic constructs on the far eastern Snake River Plain

    Science.gov (United States)

    Mazierski, Paul F.; King, John S.

    1987-01-01

    The emplacement history and petrochemical evolution of the volcanics associated with Pine Butte, Crater Butte, and other nearby vents are developed and described. Four major vents were identified in the study area and their associated eruptive products were mapped. All of the vents show a marked physical elongation or linear orientation coincident with the observed rift set. Planetary exploration has revealed the importance of volcanic processes in the genesis and modification of extraterrestrial surfaces. Interpretation of surface features has identified plains-type basaltic volcanism in various mare regions of the Moon and the volcanic provinces of Mars. Identification of these areas with features that appear analogous to those observed in the Pine Butte area suggests similar styles of eruption and mode of emplacement. Such terrestrial analogies serve as a method to interpret the evolution of volcanic planetary surfaces on the inner planets.

  7. Polyp Morphology: An Interobserver Evaluation for the Paris Classification Among International Experts

    NARCIS (Netherlands)

    van Doorn, Sascha C.; Hazewinkel, Y.; East, James E.; van Leerdam, Monique E.; Rastogi, Amit; Pellisé, Maria; Sanduleanu-Dascalescu, Silvia; Bastiaansen, Barbara A. J.; Fockens, Paul; Dekker, Evelien

    2015-01-01

    OBJECTIVES: The Paris classification is an international classification system for describing polyp morphology. Thus far, the validity and reproducibility of this classification have not been assessed. We aimed to determine the interobserver agreement for the Paris classification among seven Western

  8. Asbestos in schools. Hearing before the Subcommittee on Transportation, Tourism, and Hazardous Materials on the Committee on Energy and Commerce, House of Representatives, One Hundredth Congress, First Session on H. J. Res. 153, February 19, 1987

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    A hearing on H.J. Res. 153, under which the Environmental Protection Agency (EPA) would issue grants and loans to help school administrators finish the job of eliminating asbestos hazards from school buildings, included testimony from educators, school boards, citizen groups, and representatives of EPA. At issue was the administration's position that there is need for federal assistance for the clean-up, and that previous federal expenditures have been adequate. Witnesses explored the financial problems local schoold face in removing the asbestos and their need for further help. The hearing record includes the test of H.J. Res. 153, the testimony of the nine principal witnesses, and additional material submitted for the record.

  9. [History of the Journées Dermatologiques de Paris].

    Science.gov (United States)

    Tilles, G

    2013-12-01

    Founded in 1801 at the Hôpital Saint-Louis, Paris, under Jean-Louis Alibert, the French School of Dermatology was initially structured around the French Society of Dermatology (1889) and the organization of two world congresses (Paris 1889, 1900). After World War I, the creation of dermatological societies in the provinces infused French dermatology with new energy. In 1922, the first congress of the French-speaking dermatologists further contributed to the public profile of dermatologists in France. The "Journées de Mars" were initiated in 1961 at the Hôpital Saint-Louis, and in 1975 they went on to become the "Journées dermatologiques de Paris". Pr. Jean Civatte played a key role in their creation and in their organization for 30 years. After 1979, since actual patients could no longer be presented, the organizers of the congress had to change the content of the meeting from clinical presentations to post-graduate teaching and clinical research. From its origins in the form of meetings of French dermatologists in an intimate setting at the Hôpital Saint-Louis, the "Journées dermatologiques de Paris" grew within the ensuing decades into a major scientific event of the French-speaking dermatological community, bringing together more than 4000 participants in December each year. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  10. Withdrawing from the Paris climate agreement hurts the US

    Science.gov (United States)

    Bordoff, Jason

    2017-09-01

    The Trump administration's domestic plans would have curtailed the nation's climate action even if it had stayed in the Paris Agreement. Yet, the decision to leave the agreement undermines US international energy and climate leadership and the prospects of ramping up global climate policy ambition.

  11. Science and policy characteristics of the Paris Agreement temperature goal

    NARCIS (Netherlands)

    Schleussner, Carl Friedrich; Rogelj, Joeri; Schaeffer, Michiel; Lissner, Tabea; Licker, Rachel; Fischer, Erich M.; Knutti, Reto; Levermann, Anders; Frieler, Katja; Hare, William

    2016-01-01

    The Paris Agreement sets a long-term temperature goal of holding the global average temperature increase to well below 2 °C, and pursuing efforts to limit this to 1.5 °C above pre-industrial levels. Here, we present an overview of science and policy aspects related to this goal and analyse the

  12. The impact of the US retreat from the Paris Agreement

    NARCIS (Netherlands)

    Pickering, Jonathan; McGee, Jeffrey S.; Stephens, Tim; Karlsson-Vinkhuyzen, Sylvia I.

    2017-01-01

    The United States’ decision to withdraw from the Paris Agreement (pending possible re-engagement under different terms) may have significant ramifications for international climate policy, but the implications of this decision remain contested. This commentary illustrates how comparative analysis

  13. What does the Paris Agreement mean for adaptation?

    NARCIS (Netherlands)

    Lesnikowski, Alexandra; Ford, James; Biesbroek, Robbert; Berrang-Ford, Lea; Maillet, Michelle; Araos, Malcolm; Austin, Stephanie E.

    2017-01-01

    The Paris Agreement takes a significant step forward in strengthening the adaptation pillar of global climate policy. By widening the normative framing around adaptation, calling for stronger adaptation commitments from states, being explicit about the multilevel nature of adaptation governance, and

  14. Artificial radioactive products in the atmosphere at Paris. [In French

    Energy Technology Data Exchange (ETDEWEB)

    Abribat, M; Pouradier, J; Venet, A M

    1952-01-01

    The radioactivity of solid matter in rain water and air collected near Paris in November 1951, and in April and May 1952, follows the same decay law as that observed for fission products after a nuclear detonation in Nevada in November 1951.

  15. Retracted: Effect of Paris polyphylla extract on seconddegree burns ...

    African Journals Online (AJOL)

    2018-01-26

    Jan 26, 2018 ... This article previously published in Volume 15 Issue 10 of this journal in October 2016 has been retracted in line with the guidelines from the Committee on Publication Ethics (COPE, http://publicationethics.org/resources/guidelines). Retracted: Ma Z, Yin W, Hu G, Zhu Z, Huang Z. Effect of Paris polyphylla ...

  16. The Paris Agreement: Consequences for the EU and Carbon Markets?

    Directory of Open Access Journals (Sweden)

    Steinar Andresen

    2016-09-01

    Full Text Available Most observers argue that this agreement is a step in the right direction. However, we do not know how effective it will be in terms of reducing emissions. We therefore discuss its potential effectiveness regarding EU climate policies and carbon markets. We argue that the Paris Agreement may have a positive effect but uncertainties abound.

  17. The Magic Factory: How MGM Made "An American in Paris."

    Science.gov (United States)

    Knox, Donald

    This book covers the aesthetic and production aspects of the 1951 musical film, "An American in Paris," through interviews with many of the production specialists who helped make this motion picture. The film represents the genre of the color Hollywood musical. It was the winner of six Academy Awards, featured a major star and a developing star,…

  18. Creating to understand – developmental biology meets engineering in Paris

    NARCIS (Netherlands)

    Kicheva, Anna; Rivron, Nicolas C.

    2017-01-01

    In November 2016, developmental biologists, synthetic biologists and engineers gathered in Paris for a meeting called ‘Engineering the embryo’. The participants shared an interest in exploring how synthetic systems can reveal new principles of embryonic development, and how the in vitro manipulation

  19. Paris polyphylla extract inhibits proliferation and promotes apoptosis ...

    African Journals Online (AJOL)

    Purpose: To investigate the effect of Paris polyphylla extract (PPE) on proliferation and apoptosis in A549 human lung cancer cells. Methods: Morphological changes were examined by microscopy in A549 cells after exposure to PPE. Trypan blue staining of living cells was used to aid the construction of the cell growth curve ...

  20. Paris: Beyond the Climate Dead End through Pledge and Review?

    Directory of Open Access Journals (Sweden)

    Robert O. Keohane

    2016-09-01

    Full Text Available The Paris Climate Agreement of December 2015 marks a decisive break from the unsuccessful Kyoto regime. Instead of targets and timetables, it established a Pledge and Review system, under which states will offer Nationally Determined Contributions (INDCs to reducing emissions that cause climate change. But this successful negotiation outcome was achieved at the price of vagueness of obligations and substantial discretion for governments. Many governments will be tempted to use the vagueness of the Paris Agreement, and the discretion that it permits, to limit the scope or intensity of their proposed actions. Whether Pledge and Review under the Paris Agreement will lead to effective action against climate change will therefore depend on the inclination both of OECD countries and newly industrializing countries to take costly actions, which for the OECD countries will include financial transfers to their poorer partners. Domestic politics will be crucial in determining the attitudes of both sets of countries to pay such costs. The actual impact of the Paris Agreement will depend on whether it can be used by domestic groups favoring climate action as a point of leverage in domestic politics—that is, in a “two-level game” simultaneously involving both international and domestic politics.

  1. Graph Theory in Paris : Conference in Memory of Claude Berge

    CERN Document Server

    Fonlupt, Jean; Fouquet, Jean-Luc; Fournier, Jean-Claude; Alfonsín, Jorge

    2007-01-01

    In July 2004, a conference on graph theory was held in Paris in memory of Claude Berge, one of the pioneers of the field. The event brought together many prominent specialists on topics, such as perfect graphs and matching theory, upon which Claude Berge's work has had a major impact. This volume includes contributions to these and other topics from many of the participants.

  2. Analytical model of stress field in submerged arc welding butt joint with thorough penetration

    Directory of Open Access Journals (Sweden)

    Winczek Jerzy

    2018-01-01

    Full Text Available Analytical model of temporary and residual stresses for butt welding with thorough penetration was described assuming planar section hypothesis and using integral equations of stress equilibrium of the bar and simple Hooke’s law. In solution the effect of phase transformations (structure changes and structural strains has been taken into account. Phase transformations during heating are limited by temperature values at the beginning and at the end of austenitic transformation, depending on chemical composition of steel while the progress of phase transformations during cooling is determined on the basis of TTT-welding diagram. Temperature values at the beginning and at the end of transformation are conditioned by the speed of heating. Kinetics of diffusional transformation is described basing on Johnson-Mehl-Avrami-Kolmogorov equation, while martensitic transformation, basing on Koistinen-Marburger equation. Stresses in elasto-plastic state are determined by iteration, using elastic solutions method with changeable longitudinal modulus of elasticity, conditioned by stress-strain curve. Computations of stress field have been conducted for one-side butt welded of two steel flats made from S235 steel. It has enabled a clear interpretation of influence of temperature field and phase transformation on stresses caused by welding using Submerged Arc Welding (SAW method.

  3. The microstructure of aluminum A5083 butt joint by friction stir welding

    International Nuclear Information System (INIS)

    Jasri, M. A. H. M.; Afendi, M.; Ismail, A.; Ishak, M.

    2015-01-01

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected

  4. A Precise Visual Method for Narrow Butt Detection in Specular Reflection Workpiece Welding

    Directory of Open Access Journals (Sweden)

    Jinle Zeng

    2016-09-01

    Full Text Available During the complex path workpiece welding, it is important to keep the welding torch aligned with the groove center using a visual seam detection method, so that the deviation between the torch and the groove can be corrected automatically. However, when detecting the narrow butt of a specular reflection workpiece, the existing methods may fail because of the extremely small groove width and the poor imaging quality. This paper proposes a novel detection method to solve these issues. We design a uniform surface light source to get high signal-to-noise ratio images against the specular reflection effect, and a double-line laser light source is used to obtain the workpiece surface equation relative to the torch. Two light sources are switched on alternately and the camera is synchronized to capture images when each light is on; then the position and pose between the torch and the groove can be obtained nearly at the same time. Experimental results show that our method can detect the groove effectively and efficiently during the welding process. The image resolution is 12.5 μm and the processing time is less than 10 ms per frame. This indicates our method can be applied to real-time narrow butt detection during high-speed welding process.

  5. Primary water stress corrosion cracking resistance of alloy 690 heat affected zones of butt welds

    International Nuclear Information System (INIS)

    Fournier, L.; Calonne, O.; Toloczko, M.B.; Bruemmer, S.M.; Massoud, J.P.; Lemaire, E.; Gerard, R.; Somville, F.; Richnau, A.; Lagerstrom, J.

    2015-01-01

    A wide V-groove butt weld was fabricated from Alloy 690 plates using Alloy 152 filler material, maximum allowable heat input, and very stiff strong-backs. Alloy 690 heat affected zones (HAZ) was characterized in terms of microstructure and plastic strains induced by weld shrinkage. Crack initiation tests were carried out in pure hydrogenated steam at 400 C. degrees for 4000 h. Crack growth rate tests were performed in simulated PWR primary water at a temperature of 360 C. degrees. A maximum plastic strain around 5% was measured in the vicinity of the fusion line, which decreased almost linearly with the distance from the fusion line. Crack initiation tests on Alloy 690 HAZ specimens as well as on 30% cold-rolled Alloy 690 specimens were performed in pure hydrogenated steam at 400 C. degrees (partial pressure of hydrogen = 0.7 bar) for a total of 4000 h using cylindrical notched tensile specimens, reverse U-bends and flat micro-tensile specimens. No crack initiation was detected. Stress corrosion propagation rates revealed extremely low SCC (Stress Corrosion Cracking) growth rates both in the base metal and in the HAZ region whose magnitudes are of no engineering significance. Overall, the results indicated limited plastic strain induced by weld shrinkage in butt weld HAZ, and to no particular susceptibility of primary water stress corrosion cracking. (authors)

  6. The microstructure of aluminum A5083 butt joint by friction stir welding

    Energy Technology Data Exchange (ETDEWEB)

    Jasri, M. A. H. M.; Afendi, M. [School of Mechatronic Engineering, Universiti Malaysia Perlis, Pauh, 02600, Arau, Perlis (Malaysia); Ismail, A. [UniKL MIMET, JalanPantaiRemis, 32200, Lumut, Perak (Malaysia); Ishak, M. [Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 02600, Pekan, Pahang (Malaysia)

    2015-05-15

    This study presents the microstructure of the aluminum A5083 butt joint surface after it has been joined by friction stir welding (FSW) process. The FSW process is a unique welding method because it will not change the chemical properties of the welded metals. In this study, MILKO 37 milling machine was modified to run FSW process on 4 mm plate of aluminum A5083 butt joint. For the experiment, variables of travel speed and tool rotational speed based on capability of machine were used to run FSW process. The concentrated heat from the tool to the aluminum plate changes the plate form from solid to plastic state. Two aluminum plates is merged to become one plate during plastic state and return to solid when concentrated heat is gradually further away. After that, the surface and cross section of the welded aluminum were investigated with a microscope by 400 x multiplication zoom. The welding defect in the FSW aluminum was identified. Then, the result was compared to the American Welding Society (AWS) FSW standard to decide whether the plate can be accepted or rejected.

  7. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Kim, Jong Sung; Lee, Young Ju; Oh, Young Jin

    2015-01-01

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions

  8. Study on Tensile Fatigue Behavior of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Sung; Lee, Young Ju [Sunchon National University, Suncheon (Korea, Republic of); Oh, Young Jin [KEPCO E and C, Yongin (Korea, Republic of)

    2015-01-15

    High-density polyethylene (HDPE) piping, which has recently been applied to safety class III piping in nuclear power plants, can be butt-joined through the thermal fusion process, which heats two fused surfaces and then subject to axial pressure. The thermal fusion process generates bead shapes on the butt fusion. The stress concentrations caused by the bead shapes may reduce the fatigue lifetime. Thus, investigating the effect of the thermal butt fusion beads on fatigue behavior is necessary. This study examined the fatigue behavior of thermal butt fusion via a tensile fatigue test under stress-controlled conditions using finite element elastic stress analysis. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low-cycle fatigue region while having a negligible effect in the medium- and high-cycle fatigue regions.

  9. Age of the middle Palaeolithic site of La Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne); Datation du site paleolithique moyen de la Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne)

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, M. [Ecole Nationale Superieure de Chimie, Lab. de Travaux Pratiques de Genie Chimique, 75 - Paris (France); Laurent, M.; Bahain, J.J.; Voinchet, P.; Ricard, J.L. [Lab. de Prehistoire du Museum National d' Histoire Naturelle, Institut de Paleontologie Humaine, UMR 6569 du CNRS, 75 - Paris (France); Rousseau, L. [Amiens Univ., Lab. de Sedimentologie et de Geochimie, 80 (France)

    2000-04-01

    The middle Palaeolithic site of La Butte d'Arvigny, close to Melun, was dated using electron spin resonance (ESR) method on burn flint. Five analysed burnt flints give a mean age of 90 000 years, which ascribes Arvigny to the Mousterian laminar complex of northern France. (authors)

  10. 76 FR 21331 - Certain Carbon Steel Butt-Weld Pipe Fittings From Brazil, Japan, Taiwan, Thailand, and the People...

    Science.gov (United States)

    2011-04-15

    ... the People's Republic of China: Continuation of Antidumping Duty Orders AGENCY: Import Administration... butt-weld pipe fittings from Brazil, Japan, Taiwan, Thailand, and the People's Republic of China (PRC), pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). See Initiation of Five-Year...

  11. Butt-joint integration of active optical components based on InP/AlInGaAsP alloys

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kuznetsova, Nadezda; Semenova, Elizaveta

    2014-01-01

    We demonstrate all-active planar high quality butt-joint (BJ) integration of a QW Semiconductor Optical Amplifier (SOA) and MQW Electro-Absorption Modulator (EAM) based on an InP/AlInGaAsP platform. The degradation of the optical properties in the vicinity of ~1 μm to the BJ interface was determi...

  12. TIG-dressing of High Strength Steel Butt Welded Connections. Part 1 : Weld Toe Geometry and Local Hardness

    NARCIS (Netherlands)

    Van Es, S.H.J.; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2014-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

  13. TIG-dressing of high strength steel butt welded connections - Part 1: weld toe geometry and local hardness

    NARCIS (Netherlands)

    Es, S.H.J. van; Kolstein, M.H.; Pijpers, R.J.M.; Bijlaard, F.S.K.

    2013-01-01

    This paper presents the results of extensive measurements on weld toe geometry of as-welded and TIG-dressed butt welded connections in high strength steels S460, S690 and very high strength steels S890 and S1100. Descriptions of the measurement techniques and data analysis are presented. Four weld

  14. 77 FR 18266 - Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised...

    Science.gov (United States)

    2012-03-27

    ... INTERNATIONAL TRADE COMMISSION [Investigation Nos. 731-TA-865-867 (Second Review)] Stainless Steel Butt-Weld Pipe Fittings From Italy, Malaysia, and the Philippines; Revised Schedule for the Subject Reviews AGENCY: United States International Trade Commission. ACTION: Notice. DATES: Effective Date: March...

  15. 75 FR 430 - Notice of Intent To Prepare an Environmental Impact Statement for the Sigurd-Red Butte...

    Science.gov (United States)

    2010-01-05

    ...; UTU-83067] Notice of Intent To Prepare an Environmental Impact Statement for the Sigurd-Red Butte...) Cedar City Field Office, Cedar City, Utah, intends to prepare an Environmental Impact Statement (EIS... Fishlake National Forests), State of Utah, Millard County, Sevier County, Beaver County, Utah Division of...

  16. 76 FR 30962 - Notice of Availability of Draft Environmental Impact Statement for the Sigurd to Red Butte No. 2...

    Science.gov (United States)

    2011-05-27

    ...; UTU-83067] Notice of Availability of Draft Environmental Impact Statement for the Sigurd to Red Butte..., as amended, the Bureau of Land Management (BLM) has prepared a Draft Environmental Impact Statement... Service; State of Utah; Millard, Sevier, Beaver, Iron, and Washington counties, Utah; and the cities of St...

  17. 76 FR 5205 - Carbon Steel Butt-Weld Pipe Fittings from Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-01-28

    ...)] Carbon Steel Butt-Weld Pipe Fittings from Brazil, China, Japan, Taiwan, and Thailand AGENCY: United... Thailand. SUMMARY: The Commission hereby gives notice of the scheduling of expedited reviews pursuant to..., Taiwan, and Thailand would be likely to lead to continuation or recurrence of material injury within a...

  18. 75 FR 60814 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2010-10-01

    ...)] Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand AGENCY: United... Thailand. SUMMARY: The Commission hereby gives notice that it has instituted reviews pursuant to section... Thailand would be likely to lead to continuation or recurrence of material injury. Pursuant to section 751...

  19. Age of the middle Palaeolithic site of La Butte d'Arvigny (Moissy-Cramayel, Seine-et-Marne)

    International Nuclear Information System (INIS)

    Laurent, M.; Laurent, M.; Bahain, J.J.; Voinchet, P.; Ricard, J.L.; Rousseau, L.

    2000-01-01

    The middle Palaeolithic site of La Butte d'Arvigny, close to Melun, was dated using electron spin resonance (ESR) method on burn flint. Five analysed burnt flints give a mean age of 90 000 years, which ascribes Arvigny to the Mousterian laminar complex of northern France. (authors)

  20. 76 FR 19788 - Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand

    Science.gov (United States)

    2011-04-08

    ...)] Carbon Steel Butt-Weld Pipe Fittings From Brazil, China, Japan, Taiwan, and Thailand Determinations On... fittings from Brazil, China, Japan, Taiwan, and Thailand would be likely to lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time. \\1...

  1. Episodic Holocene eruption of the Salton Buttes rhyolites, California, from paleomagnetic, U-Th, and Ar/Ar dating

    Science.gov (United States)

    Wright, Heather M.; Vazquez, Jorge A.; Champion, Duane E.; Calvert, Andrew T.; Mangan, Margaret T.; Stelten, Mark E.; Cooper, Kari M.; Herzig, Charles; Schriener Jr., Alexander

    2015-01-01

    In the Salton Trough, CA, five rhyolite domes form the Salton Buttes: Mullet Island, Obsidian Butte, Rock Hill, North and South Red Hill, from oldest to youngest. Results presented here include 40Ar/39Ar anorthoclase ages, 238U-230Th zircon crystallization ages, and comparison of remanent paleomagnetic directions with the secular variation curve, which indicate that all domes are Holocene. 238U-230Th zircon crystallization ages are more precise than but within uncertainty of 40Ar/39Ar anorthoclase ages, suggesting that zircon crystallization proceeded until shortly before eruption in all cases except one. Remanent paleomagnetic directions require three eruption periods: (1) Mullet Island, (2) Obsidian Butte, and (3) Rock Hill, North Red Hill, and South Red Hill. Borehole cuttings logs document up to two shallow tephra layers. North and South Red Hills likely erupted within 100 years of each other, with a combined 238U-230Th zircon isochron age of: 2.83 ± 0.60 ka (2 sigma); paleomagnetic evidence suggests this age predates eruption by hundreds of years (1800 cal BP). Rock Hill erupted closely in time to these eruptions. The Obsidian Butte 238U-230Th isochron age (2.86 ± 0.96 ka) is nearly identical to the combined Red Hill age, but its Virtual Geomagnetic Pole position suggests a slightly older age. The age of aphyric Mullet Island dome is the least well constrained: zircon crystals are resorbed and the paleomagnetic direction is most distinct; possible Mullet Island ages include ca. 2300, 5900, 6900, and 7700 cal BP. Our results constrain the duration of Salton Buttes volcanism to between ca. 5900 and 500 years.

  2. Paris-Princeton lectures on mathematical finance 2010

    CERN Document Server

    Cousin, Areski; Guéant, Olivier; Hobson, David; Jeanblanc, Monique; Lasry, Jean-Michel; Laurent, Jean-Paul; Lions, Pierre-Louis; Tankov, Peter

    2011-01-01

    The Paris-Princeton Lectures on Mathematical Finance, of which this is the fourth volume, publish cutting-edge research in self-contained, expository articles from outstanding specialists - established or on the rise! The aim is to produce a series of articles that can serve as an introductory reference source for research in the field. The articles are the result of frequent exchanges between the finance and financial mathematics groups in Paris and Princeton. The present volume sets standards with articles by Areski Cousin, Monique Jeanblanc and Jean-Paul Laurent, Stéphane Crépey, Olivier Guéant, Jean-Michel Lasry and Pierre-Louis Lions, David Hobson, and Peter Tankov.

  3. Vincenzo Neri and His Legacy in Paris and Bologna.

    Science.gov (United States)

    Vanone, Federico; Lorusso, Lorenzo; Venturini, Simone

    2016-01-01

    Italian neurologist Vincenzo Neri was able to discover cinematography at the beginning of his career, when in 1908 he went to Paris to learn and improve his clinical background by following neurological cases at La Pitié with Joseph Babinski, who became his teacher and friend. While in Paris, Neri photographed and filmed several patients of famous neurologists, such as Babinski and Pierre Marie. His stills were published in several important French neurological journals and medical texts. He also collaborated with Georges Mendel, who helped Doyen film the first known surgical operation in the history of cinema. In 1910, when he came back to Bologna, he continued in his clinical activities and, for 50 years, slowly developed a huge archive of films, images, and prints of neurological, psychiatric, and orthopedic cases. This archive was extremely helpful to Neri, who especially needed to analyze neurological disorders and to differentiate them from functional conditions in order to understand clinical signs, rules, and mechanisms.

  4. Les mauvais rêves. Une prison à Disneyland Paris

    OpenAIRE

    Genetelli, Olivier

    2011-01-01

    Situé à 35 km de Paris, dans la nouvelle ville de Marne-La-Vallée, Disneyland Paris représente la première destination de loisirs d'Europe. L'implantation du “rongeur aux grande oreilles” ne s'est pas contentée d'établir un simple parc à thème, mais elle a cherché à imposer un cadre de vie sur toute une partie du territoire français, à travers un partenariat public-privé unique en France. De ce fait, nous nous retrouvons dans un “territoire-bulle” contrôlé par Disney. Tout y est propre, sécur...

  5. A novel butt-joint scheme for the preparation of electro-absorptive lasers

    International Nuclear Information System (INIS)

    Cheng Yuanbing; Pan Jiaoqing; Zhou Fan; Feng Wen; Wang Baojun; Zhu Hongliang; Zhao Lingjuan; Wang Wei

    2008-01-01

    A 1.55 μm InGaAsP/InGaAsP multiple-quantum-well electro-absorption modulator (EAM) monolithically integrated with a distributed feedback laser (DFB) diode has been realized based on a novel butt-joint scheme by ultra-low metal-organic vapour phase epitaxy for the first time. The threshold current of 25 mA and an extinction ratio of more than 30 dB are obtained by using the novel structure. The beam divergence angles at the horizontal and vertical directions are as small as 19.3 deg. x 13 deg., respectively, without a spot-size converter by undercutting the InGaAsP active region. The capacitance of the ridge waveguide device with a deep mesa buried by polyimide was reduced down to 0.30 pF

  6. Study of the joining of polycarbonate panels in butt joint configuration through friction stir welding

    Science.gov (United States)

    Astarita, Antonello; Boccarusso, Luca; Carrino, Luigi; Durante, Massimo; Minutolo, Fabrizio Memola Capece; Squillace, Antonino

    2018-05-01

    Polycarbonate sheets, 3 mm thick, were successfully friction stir welded in butt joint configuration. Aiming to study the feasibility of the process and the influence of the process parameters joints under different processing conditions, obtained by varying the tool rotational speed and the tool travel speed, were realized. Tensile tests were carried out to characterize the joints. Moreover the forces arising during the process were recorded and carefully studied. The experimental outcomes proved the feasibility of the process when the process parameters are properly set, joints retaining more than 70% of the UTS of the base material were produced. The trend of the forces was described and explained, the influence of the process parameters was also introduced.

  7. Merging high resolution geophysical and geochemical surveys to reduce exploration risk at glass buttes, Oregon

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Patrick [Ormat Nevada, Inc., Reno, NV (United States); Fercho, Steven [Ormat Nevada, Inc., Reno, NV (United States); Perkin, Doug [Ormat Nevada, Inc., Reno, NV (United States); Martini, Brigette [Corescan Inc., Ascot (Australia); Boshmann, Darrick [Oregon State Univ., Corvallis, OR (United States)

    2015-06-01

    The engineering and studies phase of the Glass Buttes project was aimed at reducing risk during the early stages of geothermal project development. The project’s inclusion of high resolution geophysical and geochemical surveys allowed Ormat to evaluate the value of these surveys both independently and in combination to quantify the most valuable course of action for exploration in an area where structure, permeability, and temperature are the most pressing questions. The sizes of the thermal anomalies at Glass Buttes are unusually large. Over the course of Phase I Ormat acquired high resolution LIDAR data to accurately map fault manifestations at the surface and collected detailed gravity and aeromagnetic surveys to map subsurface structural features. In addition, Ormat collected airborne hyperspectral data to assist with mapping the rock petrology and mineral alteration assemblages along Glass Buttes faults and magnetotelluric (MT) survey to try to better constrain the structures at depth. Direct and indirect identification of alteration assemblages reveal not only the geochemical character and temperature of the causative hydrothermal fluids but can also constrain areas of upflow along specific fault segments. All five datasets were merged along with subsurface lithologies and temperatures to predict the most likely locations for high permeability and hot fluids. The Glass Buttes temperature anomalies include 2 areas, totaling 60 km2 (23 mi2) of measured temperature gradients over 165° C/km (10° F/100ft). The Midnight Point temperature anomaly includes the Strat-1 well with 90°C (194 °F) at 603 m (1981 ft) with a 164 °C/km (10°F/100ft) temperature gradient at bottom hole and the GB-18 well with 71°C (160 °F) at 396 m (1300 ft) with a 182°C/km (11°F/100ft) gradient. The primary area of alteration and elevated temperature occurs near major fault intersections associated with Brothers Fault Zone and Basin and Range systems. Evidence for faulting is

  8. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    This document has been prepared by the US Department of Energy`s (DOE`s) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE`s Operations Office and Energy Technology Centers.

  9. The Western Environmental Technology Office (WETO), Butte, Montana. Technology summary (Revised)

    International Nuclear Information System (INIS)

    1996-03-01

    This document has been prepared by the US Department of Energy's (DOE's) Office of Environmental Management (EM) Office of Science and Technology (OST) to highlight its research, development, demonstration, testing, and evaluation (RDDT ampersand E) activities funded through the Western environmental Technology Office (WETO) in Butte, Montana. Technologies and processes described in this document have the potential to enhance DOE's cleanup and waste management efforts, as well as improve US industry's competitiveness in global environmental markets. The information presented in this document has been assembled from recently produced OST documents that highlight technology development activities within each of the OST program elements and Focus Areas. This document presents one in a series for each of DOE's Operations Office and Energy Technology Centers

  10. Residual stress in a thick section high strength T-butt weld

    International Nuclear Information System (INIS)

    Pearce, S.V.; Linton, V.M.; Oliver, E.C.

    2008-01-01

    Residual stresses in a structure are generated as a result of the various fabrication and welding processes used to make the component. Being able to quantify these residual stresses is a key step in determining the continuing integrity of a structure in service. In this work, the residual stresses around a high strength, quenched and tempered steel T-butt web to curved plate weld have been measured using neutron strain scanning. The results show that the residual stresses near the weld were dominated by the welding residual stresses, while the stresses further from the weld were dominated by the bending residual stresses. The results suggest that the combination of welding-induced residual stress and significant pre-welding residual stress, as in the case of a thick bent section of plate can significantly alter the residual stress profile from that in a flat plate

  11. A Study on the Saving Method of Plate Jigs in Hull Block Butt Welding

    Science.gov (United States)

    Ko, Dae-Eun

    2017-11-01

    A large amount of plate jigs is used for alignment of welding line and control of welding deformations in hull block assembly stage. Besides material cost, the huge working man-hours required for working process of plate jigs is one of the obstacles in productivity growth of shipyard. In this study, analysis method was proposed to simulate the welding deformations of block butt joint with plate jigs setting. Using the proposed analysis method, an example simulation was performed for actual panel block joint to investigate the saving method of plate jigs. Results show that it is possible to achieve two objectives of quality accuracy of the hull block and saving the plate jig usage at the same time by deploying the plate jigs at the right places. And the proposed analysis method can be used in establishing guidelines for the proper use of plate jigs in block assembly stage.

  12. Borderline personality disorder in cultural context: commentary on Paris.

    Science.gov (United States)

    Miller, S G

    1996-01-01

    Paris suggests that some cultures provide protective factors that can suppress the emergence of borderline personality disorder (BPD). Yet all cultures contain some individuals who perceive themselves as unable to meet what is expected of them, and the resultant distress is expressed through a variety of "ethnic" disorders such as susto or nervios. When viewed in this context, BPD is similar to these disorders, notably in the perceived sense of social failure, marginality and powerlessness.

  13. Probabilistic analysis of crack containing structures with the PARIS code

    International Nuclear Information System (INIS)

    Brueckner-Foit, A.

    1987-10-01

    The basic features of the PARIS code which has been developed for the calculation of failure probabilities of crack containing structures are explained. An important issue in the reliability analysis of cracked components is the probabilistic leak-before-break behaviour. Formulae for the leak and break probabilities are derived and it is shown how a leak detection system influences the results. An example taken from nuclear applications illustrates the details of the probabilistic leak-before-break analysis. (orig.) [de

  14. Interobserver reproducibility of the Paris system for reporting urinary cytology

    Directory of Open Access Journals (Sweden)

    Theresa Long

    2017-01-01

    Full Text Available Background: The Paris System for Reporting Urinary Cytology represents a significant improvement in classification of urinary specimens. The system acknowledges the difficulty in cytologically diagnosing low-grade urothelial carcinomas and has developed categories to deal with this issue. The system uses six categories: unsatisfactory, negative for high-grade urothelial carcinoma (NHGUC, atypical urothelial cells, suspicious for high-grade urothelial carcinoma, high-grade urothelial carcinoma, other malignancies and a seventh subcategory (low-grade urothelial neoplasm. Methods: Three hundred and fifty-seven urine specimens were independently reviewed by four cytopathologists unaware of the previous diagnoses. Each cytopathologist rendered a diagnosis according to the Paris System categories. Agreement was assessed using absolute agreement and weighted chance-corrected agreement (kappa. Disagreements were classified as low impact and high impact based on the potential impact of a misclassification on clinical management. Results: The average absolute agreement was 65% with an average expected agreement of 44%. The average chance-corrected agreement (kappa was 0.32. Nine hundred and ninety-nine of 1902 comparisons between rater pairs were in agreement, but 12% of comparisons differed by two or more categories for the category NHGUC. Approximately 15% of the disagreements were classified as high clinical impact. Conclusions: Our findings indicated that the scheme recommended by the Paris System shows adequate precision for the category NHGUC, but the other categories demonstrated unacceptable interobserver variability. This low level of diagnostic precision may negatively impact the applicability of the Paris System for widespread clinical application.

  15. Evolution of atmospheric radioactivity in Paris region. [In French

    Energy Technology Data Exchange (ETDEWEB)

    Abribat, M; Pouradier, J; Venet, A M

    1953-01-01

    Daily measurements of radioactivity have shown the passage of many atomic clouds, and particularly the series of explosions in the US and Russia, while those in the Pacific and Australia have been identified in Milan. For the Australian explosion in October 1953, there was no radioactive increase in the air in the Paris region, while for the Pacific explosion there were measurable fluctuations but very feeble. For the Russian explosions in August 1954, the fluctuations were much greater than for the Pacific ones.

  16. Retracted: Effect of Paris polyphylla extract on second- degree burns ...

    African Journals Online (AJOL)

    2018-01-26

    Jan 26, 2018 ... Retracted: Ma Z, Yin W, Hu G, Zhu Z, Huang Z. Effect of Paris polyphylla extract on second-degree burns in rats. Trop J Pharm Res 2016; 15(10):2131-2135 doi: http://dx.doi.org/10.4314/tjpr.v15i10.11. From the Editor. Our attention was drawn to the falsification of the data published in this article which was ...

  17. Le Paris d’Hemingway : une question de style

    OpenAIRE

    Mallier, Clara

    2017-01-01

    Hemingway’s representation of Paris in The Sun Also Rises and A Moveable Feast has held many a reader in thrall. It steers clear of traditional description as the author prefers to "make" the city rather than "describe" it. This article analyzes Hemingway’s style in the light of this enigmatic aesthetic statement. The author’s idiosyncratic syntax tends to blur the semantic frontiers between juxtaposed words, and his use of repetition enhances the musicality of sentences, which constitutes th...

  18. Could US mayors achieve the entire US Paris climate target?

    Science.gov (United States)

    Gurney, K. R.; Huang, J.; Hutchins, M.; Liang, J.

    2017-12-01

    After the recent US Federal Administration announcement not to adhere to the Paris Accords, 359 mayors (and counting) in the US pledged to maintain their commitments, reducing emissions within their jurisdictions by 26-28% from their 2005 levels by the year 2025. While important, this leaves a large portion of the US landscape, and a large amount of US emissions, outside of the Paris commitment. With Federal US policy looking unlikely to change, could additional effort by US cities overcome the gap in national policy and achieve the equivalent US national Paris commitment? How many cities would be required and how deep would reductions need to be? Up until now, this question could not be reliably resolved due to lack of data at the urban scale. Here, we answer this question with new data - the Vulcan V3.0 FFCO2 emissions data product - through examination of the total US energy related CO2 emissions from cities. We find that the top 500 urban areas in the US could meet the national US commitment to the Paris Accords with a reduction of roughly 30% below their 2015 levels by the year 2025. This is driven by the share of US emissions emanating from cities, particularly the largest cohort. Indeed, as the number of urban areas taking on CO2 reduction targets grows, the less the reduction burden on any individual city. In this presentation, we provide an analysis of US urban CO2 emissions and US climate policy, accounting for varying definitions of urban areas, emitting sectors and the tradeoff between the number of policy-active cities and the CO2 reduction burden.

  19. Assessment of indoor environment in Paris child day care centers.

    Science.gov (United States)

    Roda, Célina; Barral, Sophie; Ravelomanantsoa, Hanitriniala; Dusséaux, Murielle; Tribout, Martin; Le Moullec, Yvon; Momas, Isabelle

    2011-11-01

    Children are sensitive to indoor environmental pollution. Up until now there has been a lack of data on air quality in child day care centers. The aim of this study is to document the indoor environment quality of Paris child day care centers by repeated measurements, and to compare pollutant levels in child day care centers with levels in Paris dwellings. We selected 28 child day care centers frequented by a random sample of babies who participated in the PARIS birth cohort environmental investigation, and visited the child day care centers for one week twice in one year. Biological contaminants assessed were fungi, endotoxin, dust mite allergens, and chemical pollutants: aldehydes, volatile organic compounds and nitrogen dioxide (NO2). Relative humidity, temperature, and carbon dioxide levels were measured simultaneously. A standardized questionnaire was used to gather information about the buildings and their inhabitants. Airborne endotoxin levels in child day care centers were higher than those found in Paris dwellings. Dust mite allergens in child day care centers were below the threshold level for sensitization in the majority of samples, and in common with dwelling samples. Penicillium and Cladosporium were the most commonly identified genera fungi. The child day care center indoor/outdoor ratio for most chemical pollutants was above unity except for NO2, the levels for NO2 being significantly higher than those measured in homes. Chemical and biological contamination in child day care centers appears to be low, apart from endotoxin and NO2. Failure to take child exposure in child day care centers into account could result in an overestimation of children's exposure to other pollutants. Copyright © 2011 Elsevier Inc. All rights reserved.

  20. Application of ultrasonic NDT technique for butt fusion joints of plastic pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Gyung; Lim, Hyung Taik; Choi, Jeong Guen; Lee, Jae Myung [ANSCO, Daejeon (Korea, Republic of)

    2016-05-15

    The long term-durability and the soundness of the plastic pipe have been sufficiently verified through use of the plastic pipe during the past several decades. Recently, as the pipe material have been constantly developed, the application of the plastic pipe is expanded to various industrial fields, such as an increase of a use pressure, the bigger diameter of the pipe, etc. In a nuclear power plant where a carbon steel pipe and a stainless steel pipe are mainly used as a safety class III buried pipe, safety in an operation is seriously threatened by abrasion, heat deterioration or the like, frequently generated in a metal pipe. Therefore, in order to provide an alternate to this problem there is a rising interest on using high-density polyethylene (HDPE) pipes which are known to provide much enhanced corrosion, abrasion and impact resistant properties. With polyethylene piping, one of the issue that is being looked into is the integrity of butt-fusion joint. At the present time the Referencing Code and Standard for the NDT technology of for butt fusion joint of the plastic pipe have not yet established. An optimum inspection parameters were determined according to the thickness of the HDPE pipe. It was also confirmed that most of the detection results of two techniques have matched with each other. In the PAUT, it is easy to distinguish signals with from the flaws made by the thin plate and the void. Also the resolving power of PAUT on the detection in the depth direction has been demonstrated to be satisfactory.

  1. Microstructure and mechanical properties of resistance upset butt welded 304 austenitic stainless steel joints

    International Nuclear Information System (INIS)

    Sharifitabar, M.; Halvaee, A.; Khorshahian, S.

    2011-01-01

    Graphical abstract: Three different microstructural zones formed at different distances from the joint interface in resistance upset butt welding of 304 austenitic stainless steel. Highlights: → Evaluation of microstructure in resistance upset welding of 304 stainless steel. → Evaluation of welding parameters effects on mechanical properties of the joint. → Introducing the optimum welding condition for joining stainless steel bars. -- Abstract: Resistance upset welding (UW) is a widely used process for joining metal parts. In this process, current, time and upset pressure are three parameters that affect the quality of welded products. In the present research, resistance upset butt welding of 304 austenitic stainless steel and effect of welding power and upset pressure on microstructure, tensile strength and fatigue life of the joint were investigated. Microstructure of welds were studied using scanning electron microscopy (SEM). X-ray diffraction (XRD) analysis was used to distinguish the phase(s) that formed at the joint interface and in heat affected zone (HAZ). Energy dispersive spectroscopy (EDS) linked to the SEM was used to determine chemical composition of phases formed at the joint interface. Fatigue tests were performed using a pull-push fatigue test machine and the fatigue properties were analyzed drawing stress-number of cycles to failure (S-N) curves. Also tensile strength tests were performed. Finally tensile and fatigue fracture surfaces were studied by SEM. Results showed that there were three different microstructural zones at different distances from the joint interface and delta ferrite phase has formed in these regions. There was no precipitation of chromium carbide at the joint interface and in the HAZ. Tensile and fatigue strengths of the joint decreased with welding power. Increasing of upset pressure has also considerable influence on tensile strength of the joint. Fractography of fractured samples showed that formation of hot spots at

  2. Smoke Inhalation and Cyanide Poisoning: 20 Years of Paris Experience

    International Nuclear Information System (INIS)

    Baud, F. J.

    2007-01-01

    Hydroxocobalamin has been used as a cyanide poisoning antidote for many years in France. It has recently been approved by the US FDA. In Paris, hydroxocobalamin is carried by the Brigade de Sapeurs Pompiers (Paris Fire Brigade) in mobile intensive care vehicles and has been administered empirically to victims of enclosed-space fire smoke inhalation who meet the criteria of having soot in the nose, mouth, or throat, any alteration in mental status or disturbance in consciousness, and especially if any degree of hypotension is present (BP less than or equal to 100 mmHg systolic). The administration of hydroxocobalamin at the scene was shown to be safe. Hydroxocobalamin has also been efficacious and safe in 'pure' cyanide poisoning, as long as brain death has not already occurred. A 'toxidrome' of cyanide poisoning has been developed in our institution in Paris, and its application can assist in making the diagnosis of this life-threatening poisoning which cannot be emergent diagnosed by currently-available laboratory methods.(author)

  3. A thyrotoxicosis outbreak due to dietary pills in Paris

    Directory of Open Access Journals (Sweden)

    Vincent Ioos

    2008-10-01

    Full Text Available Vincent Ioos1, Vincent Das1, Eric Maury1,2, Jean-Luc Baudel1, Jérôme Guéchot3, Bertrand Guidet1,2, Georges Offenstadt1,21Réanimation Médicale; 2Université Pierre et Marie Curie-Paris 6, INSERM, UMR-S 707; 3Unité d’Hormonologie, APHP, Hôpital Saint Antoine, F-75012, Paris, FranceAbstract: Three women were consecutively admitted to our medical intensive care unit for thyrotoxicosis after the ingestion of dietary pills accidentally containing high levels of thyroxin. These cases were observed during an outbreak in the Paris area. Despite similar blood levels of thyroid hormones, their clinical presentation and outcome were very different. One patient developed febrile confusion and died from malignant hyperthermia. The second one had progressive confusion requiring mechanical plasma exchange therapy and had a favorable outcome. The third one had very moderate symptoms. These exceptional observations raise several issues concerning diagnosis, physiopathology and treatment of thyrotoxicosis factitia.Keywords: thyrotoxicosis, dietary pills, thyroxin

  4. Revision of the Paris and Brussels Conventions of Nuclear Liability

    International Nuclear Information System (INIS)

    Reyners, P.

    2002-01-01

    The Contracting Parties to the 1960 Paris Convention on Third Party Liability in the Field of Nuclear Energy and to the 1963 Brussels Convention Supplementary to the Paris Convention, have concluded this Spring four years of negotiation on the revision of these instruments. This exercise was itself started as a logical consequence of the adoption in 1997 of a revised Vienna Convention on Civil Liability for Nuclear Damage and of a Convention on Supplementary Compensation for Nuclear Damage. The Contracting Parties have concluded that the existing regime established by these Conventions remains viable and sound but that it also warrants improvements to ensure that greater financial security will be available to compensate a potentially larger number of victims in respect of a broader range of nuclear damage. A number of more technical amendments have also been agreed, in particular to ensure compatibility with other existing Conventions in this field. When the revised Paris and Brussels Conventions come into force, the total amount of funds available for compensation, provided by the liable nuclear operator and by the States concerned, will be 1.5 billion euros. (author)

  5. Géochimie organique du bassin de Paris Organic Geochemistry of the Paris Basin

    Directory of Open Access Journals (Sweden)

    Espitalie J.

    2006-11-01

    Full Text Available On présente ici les principaux résultats de l'étude géochimique réalisée, dans le bassin de Paris, à partir des déblais et des carottes provenant de 100 sondages pétroliers ou miniers, et des huiles prélevées dans les réservoirs du Mésozoïque (Trias, Bathonien supérieur, Néocomien. Les différentes méthodes géochimiques utilisées sont la pyrolyse, particulièrement bien adaptée à l'étude des nombreux échantillons de déblais recueillis, la chromatographie en phase gazeuse pour l'analyse détaillée des huiles et des extraits de roche, la spectrométrie de masse pour l'étude des biomarqueurs. Les époques principales de formation de l'huile et du gaz ont été déterminées par simulation sur ordinateur d'un modèle mathématique de genèse des hydrocarbures. Les méthodes de pyrolyse ont permis de dresser des logs géochimiques des forages étudiés et de déterminer, par le calcul, les paramètres de pyrolyse initiaux des roches-mères, avant leur enfouissement. On a pu ainsi établir, dans le périmètre étudié, des cartes de carbone organique initial, de potentiels pétroliers totaux et de quantités d'HC migrés. L'ensemble de ces résultats montre que les roches-mères de la grande majorité des huiles du Mésozoïque sont situées dans le Lias, s'échelonnant depuis le Toarcien jusqu'à l'Hettangien et que les meilleures zones de potentiel pétrolier du Bassin sont localisées à l'emplacement des régions de forte subsidence à l'époque du Lias. L'étude détaillée des hydrocarbures et celle des biomarqueurs ne permettent pas de distinguer les différentes huiles entre elles, quelle que soit leur profondeur, ni de leur attribuer une origine précise à partir des différents niveaux du Lias. Les cartes de migration mettent en évidence des déplacements latéraux des hydrocarbures dans certaines roches-mères (cas du Toarcien inférieur. Elles montrent aussi un déficit important en hydrocarbures à la base du

  6. Carmes Polytechnique, Housing in the Heart of Paris Energy renovation of a social housing estate in Paris

    Directory of Open Access Journals (Sweden)

    Christian Horn

    2017-12-01

    Full Text Available The architecture offices Atelier de la Seine and Rethink have been commissioned with the engineers Pouget Consultants by the social landlord Paris Habitat for the extensive renovation of a social housing estate in the historic centre of Paris. The estate has been built in 1930 and integrates a part of the former college of the Lombard build in the 17th century. It belongs to the social housing typology 'Habitations à Bon Marché (HBM' constructed between1894 and 1949. This typology is generally characterized by its integration in its urban context and an apparent brick facade. The renovation project includes a focus on the reduction of the energy consumption. An important subject, as of the total number of 4.6 millions of social housing in France more than 50 % have been build before 1975 (before the first thermal regulation and many are still considered energy-intensive.

  7. Policemen exposure to atmospheric pollutants in Paris; Exposition des policiers aux polluants atmospheriques a Paris

    Energy Technology Data Exchange (ETDEWEB)

    Bugajny, Ch.; Coursimault, A.; Donati, J.; Vieillard, H. [Laboratoire Central de la Prefecture de Police de Paris, 75 (France); Ducos, P.; Gaudin, R. [Institut National de Recherche et de Securite, 54 - Vandoeuvre les Nancy (France)

    2000-07-01

    The objective of this study was to evaluate the effects of automotive pollution on police health in Paris, more particularly those that are working near streets and crossroads; police working indoors are included in measurements as a reference population. This work included individual exposure measurements to some urban pollution main indicators and biological determinations to estimate the impact of these pollutants on health. Biological measurements, including determinations of carboxyhemoglobin, lead in blood and trans, trans-muconic acid in urine were realised. Carbon monoxide and benzene individual exposure had been measured by the use of individual analysers and diffusive samplers respectively. Motorcycle policemen and policemen at crossroads are more exposed than reference population working indoor. CO mean exposure levels are 6, 8 mg/m{sup 3} for motorcycle policemen, 5, 4 mg/m{sup 3} for policemen at crossroads, compared to 3, 6 mg/m{sup 3} for policemen working indoors. Carboxyhemoglobin mean values before work are four to five times more important for smokers (4, 5 % HbCO) than no-smokers (1,0%HbCO). After work, these values are respectively 5,3 % and 1,1 %. Non-smokers agents don't reach the OMS value (2,5%HbCO), even after work. Smoking contributes to higher levels of CO in blood than car exhaust pollutants, even for high air pollutants concentrations. Lead blond levels, which average is 45{mu}g/l, are clearly smaller than the OMS value (200{mu}g/l). About non-smokers agents, benzene median exposures are 74 {mu}g/m{sup 3} for motorcycle policemen, 19 {mu}g/m{sup 3} for policemen at crossroads, compared to 8 {mu}g/m{sup 3} for sedentary agents. If motorcycle agents filled up the tank with gasoline, benzene median exposure level is 229 {mu}g/m{sup 3}. Differences between smokers and non-smokers benzene exposure are not significant. For non-smokers agents, median trans, trans muconic acid values after work are 0,06 mg/l for pollution exposed agents

  8. USA Withdrawal from Paris Agreement – What Next?

    Directory of Open Access Journals (Sweden)

    Sergey Chestnoy

    2017-12-01

    Full Text Available In June 2017, President Trump announced the USA’s withdrawal from the Paris Climate Accord, which had been ratified for less than a year, thanks in large part to the USA. That drastic shift followed the change in residency at the White House. Withdrawing from the Paris Accord presents an interesting topic for analysis. There’s the practical side of the withdrawal procedure as set out in Article 28 of the agreement, not to mention the consequences of US non-participation in addressing international climate issues. There are other international forums (Such as G8 and G20, which also have an interest in climate related topics. The Article analyses the U.S. position in negotiations and its commitments assumed the moment the United Nations Framework Convention on Climate Change (UNFCCC came into effect until now: the reduction of greenhouse gas emissions, financial aid and reporting. It also provides general analysis of national legal obligations under the Paris Accord, ratification of that agreement in general and in particularly another that took place in the USA, it focuses on the specifics of withdrawal. The specified three-year period from the Agreement becoming active, after which any party may withdraw from it (2019, is a noteworthy detail. It is well-known that the Paris Agreement provides a framework that does not impose individual national commitments or a commitment to a compliance system. In essence, and from a legal point of view, it is nonbinding. This was what allowed the USA to accept the terms of the accord relatively quickly and to use the simplified procedure, which by-passed Congress. In the opinion of the authors, President Trump’s resolution to withdraw should, possibly, be considered as a simple continuation of his election discourse and the fulfilment of a campaign promise. Additionally, President Trump’s declared intent to review the Paris Accord has legal grounds on which to launch further international negotiations

  9. Understanding the Paris agreement: analysing the reporting requirements under the enhanced transparency framework

    DEFF Research Database (Denmark)

    Desgain, Denis DR; Sharma, Sudhir

    At the Paris climate conference (COP-21) in December 2015, the Conference of the Parties decided to adopt the Paris Agreement under the United Nations Framework Convention on Climate Change. This was the first time that 195 Parties had agreed on a universal, legally binding climate instrument......th October 2016, 74 Par¬ties had ratified the Agreement, accounting for 58.82% of global GHG emissions.1 The Paris Agreement will thus enter into force on 4th November 2016....

  10. Load curve impact of large electric vehicles fleet in the Paris Ile-de-France region

    OpenAIRE

    Assoumou , Edi; Marmorat , Jean-Paul; Houel , Jérôme; Roy , Valérie

    2015-01-01

    The EV-STEP project was carried out within the ERANET+ Electromobility framework. Funding for the research work presented in this paper by the French Ministry of Ecology, Sustainable Development and Energy is gratefully acknowledged. Complementary support was provided by the Chair Modeling for sustainable development, driven by MINES ParisTech, Ecole des Ponts ParisTech, and AgroParisTech; supported by ADEME, EDF, GRTgaz, Schneider Electric and the Ministry of Ecology, Sustainable Development...

  11. A Library in the Grands Moulins de Paris: challenging Reality

    Directory of Open Access Journals (Sweden)

    Catherine Tresson

    2006-07-01

    Full Text Available In 2006, the University of Paris 7 and its new Main Library will move to Paris Rive Gauche, a recently developed neighbourhood on the left bank of the Seine. The library will occupy most of the city’s former industrial mills, the Grands Moulins de Paris. As part of the project, the library developed a very detailed functional program. The facilities are expected to comprise 1,800 workstations (half of which will be computerized, and upon completion will have a capacity of 300,000 freely accessible documents and 350,000 documents in store over a total surface area of some 12,000 m2. The architect Rudy Ricciotti won the international competition to design the library held in 2001. Perfectly suited to its function, the industrial building in which the library is housed dates from the 1920s. It presents both advantages (vast surfaces, sufficient load-bearing capacity, natural light, etc. and obstacles (restrictions on free circulation, forests of columns in certain areas, interrupted spaces, etc. to being transformed into a library that is functional and adapted to its purposes. The building’s structure and the constraints it imposed profoundly influenced the program which had to be adjusted, and also affected other aspects, including the arrangement and features of the furnishings as well as the building’s system of signs. In agreement with the university, the library worked in close collaboration with the architect from the earliest sketches onwards. As a result, his initial plan also evolved considerably. The installation of the library in the Grands Moulins offers us a chance to observe the nature and effects of the interactions between the transformation of a building and the evolution of a program.

  12. Effect of the weld groove shape and pass number on residual stresses in butt-welded pipes

    International Nuclear Information System (INIS)

    Sattari-Far, I.; Farahani, M.R.

    2009-01-01

    This study used finite element techniques to analyze the thermo-mechanical behaviour and residual stresses in butt-welded pipes. The residual stresses were also measured in some welds by using the Hole-Drilling method. The results of the finite element analysis were compared with experimentally measured data to evaluate the accuracy of the finite element modelling. Based on this study, a finite element modelling procedure with reasonable accuracy was developed. The developed FE modelling was used to study the effects of weld groove shape and weld pass number on welding residual stresses in butt-welded pipes. The hoop and axial residual stresses in pipe joints of 6 and 10 mm thickness of different groove shapes and pass number were studied. It is shown that these two parameters may have significant effects on magnitude and distribution of residual stresses in welded pipes.

  13. [From Ulysses to Paris: Journey to the medicalization of ageing].

    Science.gov (United States)

    Moreno, Belén; Pedace, Mariana; Matusevich, Daniel

    2015-09-01

    In the following study we will be introducing the Paris Syndrome, taking as a departure stand the Ulises Syndrome described by Mercer Rang back in 1972. This syndrome is analyzed within the current context of medicalization that old people within Western societies are currently undergoing. We decided to present this topic by looking at the medical trajectories of four paradigmatic patients with the intention of capturing how they themselves experience this process. Through these cases, we would also like to further understand current medical practices toward the elderly.

  14. 5th Paris-Princeton Lectures on Mathematical Finance

    CERN Document Server

    Benth, Fred Espen; Guasoni, Paolo; Manolarakis, Konstantinos; Muhle-Karbe, Johannes; Nee, Colm; Protter, Philip

    2013-01-01

    The current volume presents four chapters touching on some of the most important and modern areas of research in Mathematical Finance: asset price bubbles (by Philip Protter); energy markets (by Fred Espen Benth); investment under transaction costs (by Paolo Guasoni and Johannes Muhle-Karbe); and numerical methods for solving stochastic equations (by Dan Crisan, K. Manolarakis and C. Nee).The Paris-Princeton Lecture Notes on Mathematical Finance, of which this is the fifth volume, publish cutting-edge research in self-contained, expository articles from renowned specialists. The aim is to produce a series of articles that can serve as an introductory reference source for research in the field.

  15. [From traditional to modern hospital--from Paris to Berlin].

    Science.gov (United States)

    Murken, Axel Hinrich

    Discussions about the modernisation and reform of the Hôtel Dieu in Paris concerning the catastrophic fire of 1772 there were followed very closely in Prussia and other German countries, though for a long time this had only slight consequences for modernising developments in the hospitals of Berlin or other administrative capitals of Germany. In contrast to this, the Hôpital Lariboisière was praised as a model example in Germany soon after its completion in 1854 after the pre-revolutionary Parisian plans, was imitated in Berlin twenty years later. It must be added that in Prussia great importance was attached to stricter requirements for hygiene and ventilation than in Paris. This was clearly demonstrated barely in the construction of the pavilionhospital in Berlin-Friedrichshain (1868-1874) with an extremely decentralized layout. It was not until two generations later with the completion of the municipal hospital Westend in Charlottenburg (1904-1907), a suburb of Berlin, that a slightly modified "Lariboisière" in the Wilheminian brick Baroque style was built. Similarily the acceptance of high-rise construction was, compared with Paris, considerably delayed on the German hospital scene. Whereas in the USA and France plans had been made for high-rise hospitals from the 1920s on and realized by 1935, as with the Hôpital Beaujon in Paris (1932-1935), there were fundamental reservations about them in Germany. As a result, this conception of the structure, with an effective concentration of inpatient care in towers together with separate low-rise buildings for functions such as treatment and diagnosis, only gradually gained acceptance in Germany at the end of the 1960s. On the other hand, German architects such as Hermann Distel (1875-1946) or Ernst Kopp (1890-1962), had already, indeed before the Second World War, promoted the high-rise type for inpatient care on theoretical grounds. In addition, two hospitals providing medical care within in Berlin, Martin

  16. A fractal analysis of the public transportation system of Paris

    OpenAIRE

    L Benguigui

    1995-01-01

    An analysis of the railway networks of the public transportation system of Paris, based on the notion of fractals, is presented. The two basic networks, (metropolitan and suburban) which have different functions, have also a different fractal dimension: 1.8 for the metropolitan network, and 1.5 for the suburban network. By means of computer simulation, it is concluded that the true dimension of the metro network is probably 2.0. A fractal model of the suburban network, with the same features ...

  17. Acts of terrorism in Paris and Brussels: common and different

    Directory of Open Access Journals (Sweden)

    O. S. Vonsovych

    2016-10-01

    Full Text Available The article investigates the common and distinctive features of the terrorist attacks in Paris and Brussels in 2015 and 2016. The attacks have confirmed the weakness of European security system in the context of the protection of its citizens from the threat № 1 in the world. The high level of democracy and liberalism are not allowed to use power instruments effectively in the fight against terrorism, which was the result of the fact that the terrorists were able to freely access to the place of their acts and to implement them. It was determined that the common features are the following: in Paris and in Brussels, the attacks were carried out by terrorist militaristic group «The Islamic State of Iraq and the Levant» (ISIL; the places of commission of terrorist acts; guns of terrorists; military units of France and Belgium are parties of the armed conflict in Syria on the side of the Syrian opposition and struggle against ISIL; there were a few terrorist attacks. It is proved that the differences are as follows: in Paris, in addition to explosives, packed with nails, also were used automatic weapons and grenades, but only explosives in Brussels; France is more active in the fight against terrorism in the international arena and in every way opposed to violence against humanity, so there is a terrorist attack can be seen as a blow to the democratic and humanitarian values; Belgium is a «political heart» of the European Union that’s why the terrorist attack on it can be seen as a blow to the political system of the EU; in Paris, the attack was supposed to apply except for the population and for high officials in the name of F. Hollande and F. Steinmeier, and in Brussels – only civilians.conducting effective public diplomacy by means of virtual diplomacy. In the context of the establishment of the global information society the key target groups must be: Diasporas, foreign media (including bloggers, investors, influential foreign

  18. Numerical simulation of meteorological conditions for peak pollution in Paris

    Energy Technology Data Exchange (ETDEWEB)

    Carissimo, B. [Electricite de France (EDF), 78 - Chatou (France). Direction des Etudes et Recherches

    1997-06-01

    Results obtained on the simulation of meteorological conditions during two episodes of peak pollution in Paris are presented, one in the winter, the other in the summer. The A3UR air quality modelling system is first described followed by the MERCURE mesoscale meteorological model. The conditions of simulation are described. The results obtained on these two causes show satisfactory agreement, for example on the magnitude of the urban heat island which is correctly reproduced. In this study, several areas of progress have been identified: improvement of the altitude measurement network around cities, the simulation of light wind conditions and the simulation of formation and dissipation of fog. (author) 24 refs.

  19. Overcoming Obstacles in Global Climate Action from Copenhagen to Paris

    OpenAIRE

    Garrison, Jean A.; Kolleg-Forschergruppe The Transformative Power of Europe

    2017-01-01

    The global climate change agreement completed on December 12, 2015 in Paris set a collective target to cap greenhouse gas emissions in order to limit the temperature increase to 2 degrees Celsius with a goal to get as close as possible to 1.5 degrees above pre-industrial levels. These goals were to be accomplished through a “bottom up” mechanism for national policy approaches in which states made their own choices about how they would meet climate targets. This paper examines why and how an a...

  20. Walter Benjamin e Paris: individualidade e trabalho intelectual

    Directory of Open Access Journals (Sweden)

    Renato Ortiz

    2000-05-01

    Full Text Available Este artigo é uma leitura do texto de Walter Benjamin Paris capital do século XIX. A partir do conjunto de anotações que Benjamin faz de diversos livros consultados, principalmente durante sua pesquisa na Bibliothèque Nationale, o autor pretende trabalhar a noção de indivíduo vinculando-a a dois temas. Primeiro, a emergência do flâneur como tradução do espírito de mobilidade que se inaugura com a modernidade. Para isso a discussão sobre a noção de espaço, particularmente no que diz respeito a cidade de Paris, é importante. O flâneur surge assim como um indivíduo desenraizado que se locomove através do espaço urbano remodelado. Segundo, uma aproximação entre o ato da flânerie e o trabalho intelectual. Considerando a flânerie como uma atividade intelectual o autor mostra como os temas do distanciamento e da construção do objeto são relevantes tanto para o flâneur-detetive quanto para a reflexão nas ciências sociais.This paper is an interpretation of Walter Benjamins Paris, Capital of the 19th Century. Based on the notes Benjamin made on several books he read, mainly during his research at the Bibliotèque Nationale, the author discusses the notion of the individual linking it to two themes. First, to the emergence of the flâneur as a translation of the spirit of mobility which starts with modernity. The discussion on the notion of space, especially where it concerns Paris, is essential for this analysis. The flâneur is seen as an uprooted individual who moves around the remodelled urban space. Second, to the proximity between the act of flânerie and that of intellectual work. Taking flânerie to be intellectual activity, the author shows how the themes of the distancing and the construction of the object are relevant, both to the detective-flâneur and to the reflection in social sciences.

  1. Sources and geographical origins of fine aerosols in Paris (France)

    International Nuclear Information System (INIS)

    Bressi, M.; Nicolas, J.B.; Sciare, J.; Feron, A.; Nonnaire, N.; Petit, J.E.

    2014-01-01

    The present study aims at identifying and apportioning fine aerosols to their major sources in Paris (France) - the second most populated - larger urban zone - in Europe - and determining their geographical origins. It is based on the daily chemical composition of PM2.5 examined over 1 year at an urban background site of Paris (Bressi et al., 2013). Positive matrix factorization (EPA PMF3.0) was used to identify and apportion fine aerosols to their sources; bootstrapping was performed to determine the adequate number of PMF factors, and statistics (root mean square error, coefficient of determination, etc.) were examined to better model PM2.5 mass and chemical components. Potential source contribution function (PSCF) and conditional probability function (CPF) allowed the geographical origins of the sources to be assessed; special attention was paid to implement suitable weighting functions. Seven factors, namely ammonium sulfate (A.S.)-rich factor, ammonium nitrate (A.N.)-rich factor, heavy oil combustion, road traffic, biomass burning, marine aerosols and metal industry, were identified; a detailed discussion of their chemical characteristics is reported. They contribute 27, 24, 17, 14, 12, 6 and 1% of PM2.5 mass (14.7 μgm -3 ) respectively on the annual average; their seasonal variability is discussed. The A.S.- and A.N.-rich factors have undergone mid- or long-range transport from continental Europe; heavy oil combustion mainly stems from northern France and the English Channel, whereas road traffic and biomass burning are primarily locally emitted. Therefore, on average more than half of PM2.5 mass measured in the city of Paris is due to mid- or long-range transport of secondary aerosols stemming from continental Europe, whereas local sources only contribute a quarter of the annual averaged mass. These results imply that fine-aerosol abatement policies conducted at the local scale may not be sufficient to notably reduce PM2.5 levels at urban background sites

  2. Busted Butte Phase 2: Introduction and Analytical Modeling of Nonreactive Tracer and Lithium Breakthrough

    International Nuclear Information System (INIS)

    Turin, H.J.; Soll, W.E.

    2002-01-01

    The Busted Butte Unsaturated-Zone Transport Test Facility is located approximately 8 km southeast of Yucca Mountain, and was designed to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain. Busted Butte Phase 2 consisted of a 10m x 10m x 7m test block. From July 1988 through October 2000, complex tracer mixtures were injected continuously at 77 discrete points located along eight parallel 10-m boreholes arranged in two horizontal planes. In August 1999, iodide was added to the tracer mixture to explore the effects of initial hydraulic transients. During the course of the experiment, porewater samples were collected at regular intervals using sorbing-paper collection pads, emplaced into fifteen horizontal and inclined 10-m collection boreholes, oriented perpendicular to the injection boreholes. Potential travel distances ranged from 20 cm to over 500 cm. Nonreactive tracer and weakly sorbing lithium breakthrough was observed at most of the collection points during the injection period. Following termination of injection, approximately 800 rock samples were collected using overcore and mineback techniques, and analyzed for tracer concentration. Rock analyses are discussed in a subsequent paper. To complement complex 3-dimensional finite-element modeling of the entire block, bromide, iodide, and lithium breakthrough onto the collection pads has been modeled with CXTFIT. This simple 1-dimensional analytical code uses a non-linear curve-fitting routine to estimate transport parameters including apparent velocity, dispersivity, and field retardation factors. Preliminary results show that: (1) Bromide and iodide behaved similarly, despite the fact that bromide was injected in a strongly transient flow field, while iodide injection began after flow had approached steady state conditions. (2) With the exception of the closest collection points, tracer velocities remained relatively constant, indicating that transport was

  3. Wired for success: A history of the Butte, Anaconda & Pacific Railway, 1892--1985

    Science.gov (United States)

    Mutschler, Charles Vincent

    The Butte, Anaconda & Pacific Railway (BA&P) was a standard gauge common carrier short line railroad within the state of Montana. A subsidiary of the Anaconda Copper Mining Company, the BA&P was built to carry ore from mines at Butte, Montana to Anaconda, twenty-six miles away, for concentrating and smelting. Other freight and passenger business was of secondary importance. In 1912, when General Electric contracted to convert the BA&P from steam to electric operation, the short line became a proving ground for main line railroad electrification, and the center of attention from advocates for electric power. Electric operation was demonstrated to be mechanically superior to the use of steam locomotives on the BA&P. Immediately after the BA&P proved the technological feasibility of high voltage direct current for moving heavy freight trains, the Chicago Milwaukee & St. Paul (CM&St.P) electrified over 600 miles of transcontinental main line using the basic technology demonstrated on the BA&P. However, on long distances of track with relatively few trains such as the CM&St.P, the capital cost of the electric distribution system exceeded the operational savings obtained by use of electric locomotives. Steam locomotives remained the primary form of railroad motive power in the United States until the 1950's, when the diesel-electric locomotive combined the mechanical efficiency of electric motors with an on-board diesel generating plant, eliminating the need for expensive electric power supply and distribution wires of conventional electrics. The BA&P purchased three diesels in the early 1950's, but relied primarily on its electric locomotives until 1967, when diesel operation became less costly than continued use of electric motive power. The BA&P offers a microcosmic view of the transformation of one industry in response to technological and economic forces as the United States moved from reliance on coal-burning steam power to electric power and internal combustion

  4. A Semi-analytical model for creep life prediction of butt-welded joints in cylindrical vessels

    International Nuclear Information System (INIS)

    Zarrabi, K.

    2001-01-01

    There have been many investigations on the life assessment of high temperature weldments used in cylindrical pressure vessels, pipes and tubes over the last two decades or so. But to the author's knowledge, currently, there exists no practical, economical and relatively accurate model for creep life assessment of butt-welded joints in cylindrical pressure vessels. This paper describes a semi-analytical and economical model for creep life assessment of butt-welded joints. The first stage of the development of the model is described where the model takes into account the material discontinuities at the welded joint only. The development of the model to include other factors such as geometrical stress concentrations, residual stresses, etc will be reported separately. It has been shown that the proposed model can estimate the redistributions of stresses in the weld and Haz with an error of less than 4%. It has also been shown that the proposed model can conservatively predict the creep life of a butt-welded joint with an error of less than 16%

  5. A Study on the compensation margin on butt welding joint of Large Steel plates during Shipbuilding construction

    International Nuclear Information System (INIS)

    Kim, J; Jeong, K; Chung, H; Jeong, H; Ji, M; Yun, C; Lee, J

    2015-01-01

    This paper examines the characteristics of butt welding joint shrinkage for shipbuilding and marine structures main plate. The shrinkage strain of butt welding joint which is caused by the process of heat input and cooling, results in the difference between dimensions of the actual parent metal and the dimensions of design. This, in turn, leads to poor quality in the production of ship blocks and reworking through period of correction brings about impediment on improvement of productivity. Through experiments on butt welding joint's shrinkage strain on large structures main plate, the deformation of welding residual stress in the form of I, Y, V was obtained. In addition, the results of experiments indicate that there is limited range of shrinkage in the range of 1 ∼ 2 mm in 11t ∼ 21.5t thickness and the effect of heat transfer of weld appears to be limited within 1000 mm based on one side of seam line so there was limited impact of weight of parent metal on the shrinkage. Finally, it has been learned that Shrinkage margin needs to be applied differently based on groove phenomenon in the design phase in order to minimize shrinkage. (paper)

  6. Water physical and chemical data from current meter and bottle casts from the H.J.W. FAY and other platforms as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 1977-05-16 to 1977-09-15 (NODC Accession 7800386)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical and chemical data were collected using current meter and bottle casts from the H.J.W. FAY and other platforms from May 16, 1977 to September 15, 1977....

  7. Water physical, chemical, and benthic organisms data from current meter and bottle casts from the H.J.W. FAY and CAPE HENLOPEN as part of the Ocean Continental Shelf - Mid Atlantic (OCS - Mid Atlantic) project, 03 November 1976 - 15 September 1977 (NODC Accession 7800319)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Water physical, chemical, and benthic organisms data were collected using current meter and bottle casts from the H.J.W.FAY and CAPE HENLOPEN from November 3, 1976...

  8. Petrographic Analysis and Geochemical Source Correlation of Pigeon Peak, Sutter Buttes, CA

    Science.gov (United States)

    Novotny, N. M.; Hausback, B. P.

    2013-12-01

    The Sutter Buttes are a volcanic complex located in the center of the Great Valley north of Sacramento. They are comprised of numerous inter-intruding andesite and rhyolite lava domes of varying compositions surrounded by a shallow rampart of associated tephras. The Pigeon Peak block-and-ash flow sequence is located in the rampart and made up of a porphyritic Biotite bearing Hornblende Andesite. The andesite blocks demonstrate a high degree of propylization in hornblende crystals, highly zoned plagioclase, trace olivine, and display a red to gray color gradation. DAR is an andesite dome located less than one mile from Pigeon Peak. Of the 15 to 25 andesite lava domes within four miles from Pigeon Peak, only DAR displays trace olivine, red to grey color stratification, low biotite content, and propylitized hornblende. These characteristic similarities suggest that DAR may be the source for Pigeon Peak. My investigation used microprobe analysis of the DAR and Pigeon Peak feldspar crystals to identify the magmatic history of the magma body before emplacement. Correlation of the anorthite zoning within the feldspars from both locations support my hypothesis that DAR is the source of the Pigeon Peak block-and-ash flow.

  9. IE Information No. 86-104: Unqualified butt splice connectors identified in qualified penetrations

    International Nuclear Information System (INIS)

    Jordan, E.L.

    1992-01-01

    During an NRC equipment qualification (EQ) inspection at Dresden Nuclear Power Station, May 19--23, 1986, a deficiency was discovered concerning a lack of similarity between tested and installed nylon insulated butt splices in EQ qualified GE electrical penetrations. commonwealth Edison sent four sample splices removed from Quad Cities Nuclear Power Station to Wyle Laboratory to further substantiate their qualification for use in a harsh environment. These splices were identical to those installed at Dresden. During the testing performed at Wyle Laboratory December 4--5, 1986, all four samples exhibited excessive leakage currents to ground when exposed to a steam environment. Commonwealth Edison consequently declared the splices unqualified and shut down its Quad Cities Unit 1 to rework the splices by wrapping them with previously qualified tape. Dresden Unit 2 has similarly reworked the splices by wrapping them with tape. Duane Arnold Energy Center also has commenced a shutdown in order to make repairs. The short circuits that occurred appeared to start by condensation entering the splice between the wire insulation and the nylon tubing. The arcing caused insulation degradation that then allowed arcs to pass through the insulation to the enclosure

  10. Requirements to gap widths and clamping for CO2 laser butt welding

    DEFF Research Database (Denmark)

    Gong, Hui; Juhl, Thomas Winther

    1999-01-01

    In the experimental study of fixturing and gap width requirements a clamping device for laser butt welding of steel sheets has been developed and tested. It has fulfilled the work and made the gap width experiments possible.It has shown that the maximum allowable gap width to some extent...... is inversely related to the welding speed. Also larger laser power leads to bigger allowable gap widths. The focal point position, though, has little influence on the maximum allowable gap width.During analysis X-ray photos show no interior porosity in the weld seam. Other methods have been applied to measure...... responses from variations in welding parameters.The table below lists the results of the study, showing the maximum allowable gap widths and some corresponding welding parameters.Maximum allowable Gap Width; Welding Speed; Laser Power:0.10 mm2 m/min2, 2.6 kW0.15 mm1 m/min2 kW0.20 mm1 m/min2.6 kW0.30 mm0.5 m...

  11. Application of Phased Array Ultrasonic Testing (PAUT) on Single V-Butt Weld Integrity Determination

    International Nuclear Information System (INIS)

    Amry Amin Abas; Mohd Kamal Shah Shamsudin; Norhazleena Azaman

    2015-01-01

    Phased Array Ultrasonic Testing (PAUT) utilizes arrays of piezoelectric elements that are embedded in an epoxy base. The benefit of having such kind of array is that beam forming such as steering and focusing the beam front possible. This enables scanning patterns such as linear scan, sectorial scan and depth focusing scan to be performed. Ultrasonic phased array systems can potentially be employed in almost any test where conventional ultrasonic flaw detectors have traditionally been used. Weld inspection and crack detection are the most important applications, and these tests are done across a wide range of industries including aerospace, power generation, petrochemical, metal billet and tubular goods suppliers, pipeline construction and maintenance, structural metals, and general manufacturing. Phased arrays can also be effectively used to profile remaining wall thickness in corrosion survey applications. The benefits of PAUT are simplifying inspection of components of complex geometry, inspection of components with limited access, testing of welds with multiple angles from a single probe and increasing the probability of detection while improving signal-to-noise ratio. This paper compares the result of inspection on several specimens using PAUT as to digital radiography. The specimens are welded plates with single V-butt weld made of carbon steel. Digital radiography is done using blue imaging plate with x-ray source. PAUT is done using Olympus MX2 with 5 MHz probe consisting of 64 elements. The location, size and length of defect is compared. (author)

  12. Characterization of magnetically impelled arc butt welded T11 tubes for high pressure applications

    Directory of Open Access Journals (Sweden)

    R. Sivasankari

    2015-09-01

    Full Text Available Magnetically impelled arc butt (MIAB welding is a pressure welding process used for joining of pipes and tubes with an external magnetic field affecting arc rotation along the tube circumference. In this work, MIAB welding of low alloy steel (T11 tubes were carried out to study the microstructural changes occurring in thermo-mechanically affected zone (TMAZ. To qualify the process for the welding applications where pressure could be up to 300 bar, the MIAB welds are studied with variations of arc current and arc rotation time. It is found that TMAZ shows higher hardness than that in base metal and displays higher weld tensile strength and ductility due to bainitic transformation. The effect of arc current on the weld interface is also detailed and is found to be defect free at higher values of arc currents. The results reveal that MIAB welded samples exhibits good structural property correlation for high pressure applications with an added benefit of enhanced productivity at lower cost. The study will enable the use of MIAB welding for high pressure applications in power and defence sectors.

  13. Spectral image analysis of the Hopi Buttes volcanic field, Arizona, U.S.A

    International Nuclear Information System (INIS)

    Gabelman, J.W.; Wescott, T.F.

    1987-01-01

    The possibility of economic deposits, the semi-arid environment and the youth of applied remote-sensing technology suit the Hopi Buttes volcanic field as a test site for the application of multispectral image analysis to geologic interpretation and uranium evaluation. All possible enhancements of seasonal images were created in the General Electric interactive multispectral analyzer, model 100, and photographed for study. Contrast and directional edge-enhancement excellently delineated the patterns of megafractures and lineaments which are obscure to ground observation, but may control vent positions. Two sets of orthogonal groups of megafractures are oriented in the cardinal and diagonal directions; they suggest rotation of the stress ellipsoid, or the overlap of stresses from a differently oriented ellipsoid in a neighboring region. A megacircle of vents suggests a deep cylindrical fracture zone and possible incipient cauldron. Other circular areas with unusually abundant travertine maars or volcanic-material-free pipes suggest incipient collapse. Band ratios, density slices and histogram stretches selectively enhanced and differentiated stratigraphic formations, limburgite, tuff, travertine, gypsum-argillized rock and Fe-enriched rock. These were portrayed successfully on thematic map-images. A signature was derived for uraniferous travertine-marl and used to map its distribution. 30 refs.; 24 figs

  14. Identifying Variations in Hydraulic Conductivity on the East River at Crested Butte, CO

    Science.gov (United States)

    Ulmer, K. N.; Malenda, H. F.; Singha, K.

    2016-12-01

    Slug tests are a widely used method to measure saturated hydraulic conductivity, or how easily water flows through an aquifer, by perturbing the piezometric surface and measuring the time the local groundwater table takes to re-equilibrate. Saturated hydraulic conductivity is crucial to calculating the speed and direction of groundwater movement. Therefore, it is important to document data variance from in situ slug tests. This study addresses two potential sources of data variability: different users and different types of slug used. To test for user variability, two individuals slugged the same six wells with water multiple times at a stream meander on the East River near Crested Butte, CO. To test for variations in type of slug test, multiple water and metal slug tests were performed at a single well in the same meander. The distributions of hydraulic conductivities of each test were then tested for variance using both the Kruskal-Wallis test and the Brown-Forsythe test. When comparing the hydraulic conductivity distributions gathered by the two individuals, we found that they were statistically similar. However, we found that the two types of slug tests produced hydraulic conductivity distributions for the same well that are statistically dissimilar. In conclusion, multiple people should be able to conduct slug tests without creating any considerable variations in the resulting hydraulic conductivity values, but only a single type of slug should be used for those tests.

  15. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    International Nuclear Information System (INIS)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib; Haruman, Esa; Chau, Chan Yin

    2011-01-01

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy

  16. Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER

    Energy Technology Data Exchange (ETDEWEB)

    Sulaiman, Mohd Shahar; Manurung, Yupiter HP; Rahim, Mohammad Ridzwan Abdul Mohd; Redza, Ridhwan; Lidam, Robert Ngendang Ak.; Abas, Sunhaji Kiyai; Tham, Ghalib [Universiti Teknologi MARA, Kuala Lumpur (Malaysia); Haruman, Esa [Bakrie University, Jakarta (Indonesia); Chau, Chan Yin [ESI Group, Kuala Lumpur (Malaysia)

    2011-10-15

    This paper investigates the capability of linear thermal elastic numerical analysis to predict the welding distortion that occurs due to GMAW process. Distortion is considered as the major stumbling block that can adversely affect the dimensional accuracy and thus lead to expensive corrective work. Hence, forecast of distortion is crucially needed and ought to be determined in advance in order to minimize the negative effects, improve the quality of welded parts and finally to reduce the production costs. In this study, the welding deformation was simulated by using relatively new FEM software WELD PLANNER developed by ESI Group. This novel Welding Simulation Solution was employed to predict welding distortion induced in butt and T-joints with thickness of 4 mm. Low carbon steel material was used for the simulation and experimental study. A series of experiments using fully automated welding process were conducted for verification purpose to measure the distortion. By comparing between the simulation and experimental results, it was found out that this program code offered fast solution analysis time in estimating weld induced distortion within acceptable accuracy.

  17. Assessment of role of metamorphic remobilization in genesis of uranium ores from Ralston Buttes area, Colorado

    International Nuclear Information System (INIS)

    Chatterjee, S.K.

    1984-01-01

    The Ralston Buttes mining district, the principal source of commercial uranium in the Front Range since the late 1940s, is located northeast of Golden and southeast of the Front Range mineral belt. Uranium ore occurs in veins emplaced in fault breccia in Precambrian metamorphic rocks. The progenitors of the metamorphic rocks are a possible source for the uranium. Hornblende gneisses of the Idaho Springs Formation is the major rock type in the area, thus its origin is a major consideration in assessing the quantity of uranium that might have been contributed by metamorphic processes. To evaluate this, 41 rock samples (19 hornblende gneisses, 7 biotite gneisses, 5 chlorite gneisses, and 10 metapelites) were analyzed for major elements, and 3 rock samples (16 hornblende gneisses, 8 biotite gneisses, 4 chlorite gneisses, and 5 mica schists) were analyzed for trace metals (Rb, Sc, Zr, V, Ni, Co, Cr, Ba, U, and Th). Four samples of hornblende gneiss and 1 sample of mica schists were also analyzed for rare earth elements. Major elements are rare earth data indicate that the hornblende gneiss was derived from sediments and tholeiitic basalts. Trace element data suggest a volcanic provenance for these sediments. Rare earth patterns and uranium and thorium abundances of metapelites are similar to average North American shales. Low uranium and thorium values and low thorium-uranium ratios in hornblende gneisses and mica schists preclude large-scale uranium remobilization during metamorphism of these source rocks

  18. Two months of disdrometer data in the Paris area

    Science.gov (United States)

    Gires, Auguste; Tchiguirinskaia, Ioulia; Schertzer, Daniel

    2018-05-01

    The Hydrology, Meteorology, and Complexity laboratory of École des Ponts ParisTech (hmco.enpc.fr) has made a data set of optical disdrometer measurements available that come from a campaign involving three collocated devices from two different manufacturers, relying on different underlying technologies (one Campbell Scientific PWS100 and two OTT Parsivel2 instruments). The campaign took place in January-February 2016 in the Paris area (France). Disdrometers provide access to information on the size and velocity of drops falling through the sampling area of the devices of roughly a few tens of cm2. It enables the drop size distribution to be estimated and rainfall microphysics, kinetic energy, or radar quantities, for example, to be studied further. Raw data, i.e. basically a matrix containing a number of drops according to classes of size and velocity, along with more aggregated ones, such as the rain rate or drop size distribution with filtering, are available. Link to the data set: https://zenodo.org/record/1240168" target="_blank">https://zenodo.org/record/1240168 (DOI: https://doi.org/10.5281/zenodo.1240168" target="_blank">https://doi.org/10.5281/zenodo.1240168).

  19. Understanding the origin of Paris Agreement emission uncertainties.

    Science.gov (United States)

    Rogelj, Joeri; Fricko, Oliver; Meinshausen, Malte; Krey, Volker; Zilliacus, Johanna J J; Riahi, Keywan

    2017-06-06

    The UN Paris Agreement puts in place a legally binding mechanism to increase mitigation action over time. Countries put forward pledges called nationally determined contributions (NDC) whose impact is assessed in global stocktaking exercises. Subsequently, actions can then be strengthened in light of the Paris climate objective: limiting global mean temperature increase to well below 2 °C and pursuing efforts to limit it further to 1.5 °C. However, pledged actions are currently described ambiguously and this complicates the global stocktaking exercise. Here, we systematically explore possible interpretations of NDC assumptions, and show that this results in estimated emissions for 2030 ranging from 47 to 63 GtCO 2 e yr -1 . We show that this uncertainty has critical implications for the feasibility and cost to limit warming well below 2 °C and further to 1.5 °C. Countries are currently working towards clarifying the modalities of future NDCs. We identify salient avenues to reduce the overall uncertainty by about 10 percentage points through simple, technical clarifications regarding energy accounting rules. Remaining uncertainties depend to a large extent on politically valid choices about how NDCs are expressed, and therefore raise the importance of a thorough and robust process that keeps track of where emissions are heading over time.

  20. Social mix policies in Paris: discourses, policies and social effects.

    Science.gov (United States)

    Bacqué, Marie-Hélène; Fijalkow, Yankel; Launay, Lydie; Vermeersch, Stéphanie

    2011-01-01

    Since the 1980s, the issue of social mix has become a public policy category in France. Enshrined in legislation, yet remaining controversial, it represents a major premise on which housing policies have been reconfigured. The concept of social mix is essentially based on who lives where, but it is also evoked in the context of urban renewal schemes for social housing estates, as well as in relation to new-build developments. A study of the bases of social mix policies conducted in Paris since 2001 in the context of the embourgeoisement of the capital shows the fundamental role of social housing stock. The City Council has become involved in policy decisions about both the location and the allocation of social housing. Particular attention has been paid to the middle classes in the name of the principle of ‘balancing the population’. In order to measure the effects of the policy, this article relies on an analysis of two City of Paris schemes that have the stated intent of creating social mix. One of these schemes consists of redeveloping a working-class neighbourhood, Goutte d'Or, while the other involves the new acquisition of social housing in various more affluent neighbourhoods in the capital. This comparative study of the population shows that, whether in a neighbourhood poised for gentrification or in a more affluent neighbourhood, this policy has major effects on forms of local social cohesion, setting in motion individual trajectories and reshaping social and/or ethnic identities.

  1. Understanding the origin of Paris Agreement emission uncertainties

    Science.gov (United States)

    Rogelj, Joeri; Fricko, Oliver; Meinshausen, Malte; Krey, Volker; Zilliacus, Johanna J. J.; Riahi, Keywan

    2017-06-01

    The UN Paris Agreement puts in place a legally binding mechanism to increase mitigation action over time. Countries put forward pledges called nationally determined contributions (NDC) whose impact is assessed in global stocktaking exercises. Subsequently, actions can then be strengthened in light of the Paris climate objective: limiting global mean temperature increase to well below 2 °C and pursuing efforts to limit it further to 1.5 °C. However, pledged actions are currently described ambiguously and this complicates the global stocktaking exercise. Here, we systematically explore possible interpretations of NDC assumptions, and show that this results in estimated emissions for 2030 ranging from 47 to 63 GtCO2e yr-1. We show that this uncertainty has critical implications for the feasibility and cost to limit warming well below 2 °C and further to 1.5 °C. Countries are currently working towards clarifying the modalities of future NDCs. We identify salient avenues to reduce the overall uncertainty by about 10 percentage points through simple, technical clarifications regarding energy accounting rules. Remaining uncertainties depend to a large extent on politically valid choices about how NDCs are expressed, and therefore raise the importance of a thorough and robust process that keeps track of where emissions are heading over time.

  2. Australia's Unprecedented Future Temperature Extremes Under Paris Limits to Warming

    Science.gov (United States)

    Lewis, Sophie C.; King, Andrew D.; Mitchell, Daniel M.

    2017-10-01

    Record-breaking temperatures can detrimentally impact ecosystems, infrastructure, and human health. Previous studies show that climate change has influenced some observed extremes, which are expected to become more frequent under enhanced future warming. Understanding the magnitude, as a well as frequency, of such future extremes is critical for limiting detrimental impacts. We focus on temperature changes in Australian regions, including over a major coral reef-building area, and assess the potential magnitude of future extreme temperatures under Paris Agreement global warming targets (1.5°C and 2°C). Under these limits to global mean warming, we determine a set of projected high-magnitude unprecedented Australian temperature extremes. These include extremes unexpected based on observational temperatures, including current record-breaking events. For example, while the difference in global-average warming during the hottest Australian summer and the 2°C Paris target is 1.1°C, extremes of 2.4°C above the observed summer record are simulated. This example represents a more than doubling of the magnitude of extremes, compared with global mean change, and such temperatures are unexpected based on the observed record alone. Projected extremes do not necessarily scale linearly with mean global warming, and this effect demonstrates the significant potential benefits of limiting warming to 1.5°C, compared to 2°C or warmer.

  3. Ice-free Arctic projections under the Paris Agreement

    Science.gov (United States)

    Sigmond, Michael; Fyfe, John C.; Swart, Neil C.

    2018-05-01

    Under the Paris Agreement, emissions scenarios are pursued that would stabilize the global mean temperature at 1.5-2.0 °C above pre-industrial levels, but current emission reduction policies are expected to limit warming by 2100 to approximately 3.0 °C. Whether such emissions scenarios would prevent a summer sea-ice-free Arctic is unknown. Here we employ stabilized warming simulations with an Earth System Model to obtain sea-ice projections under stabilized global warming, and correct biases in mean sea-ice coverage by constraining with observations. Although there is some sensitivity to details in the constraining method, the observationally constrained projections suggest that the benefits of going from 2.0 °C to 1.5 °C stabilized warming are substantial; an eightfold decrease in the frequency of ice-free conditions is expected, from once in every five to once in every forty years. Under 3.0 °C global mean warming, however, permanent summer ice-free conditions are likely, which emphasizes the need for nations to increase their commitments to the Paris Agreement.

  4. Addressing climate change: lessons from Paris, challenges for Marrakech

    International Nuclear Information System (INIS)

    Jayaram, Dhanasree

    2016-02-01

    Dhanasree Jayaram, Project Associate in the Manipal Advanced Research Group of Manipal University (Karnataka, India), and author of 'Breaking out of the Green House: Indian Leadership in Times of Environmental Change (2012)' answers the following questions regarding the Paris agreement reach during COP21: - What is your assessment of the Paris agreement reach during COP21? - What is the most positive/negative aspect? - Is the agreement legally binding according to you? - What was the main 'redline' for the Indian government in the negotiations? - Is the Indian government satisfied by the content of the agreement? - Some people say that what happened outside the COP21 but during the week (Indian Solar Alliance, New Chinese Funds, Divest-Invest campaign, Electricity for Africa, activism of civil society, etc.), is more important that what happened inside. Do you share this opinion? - Are you optimistic regarding the gap between the 1.5 deg. C limit and the current level of the INDC? - What do you think about the position of the OPEC countries? - What are the main progresses proposed by the agreement regarding the financial dimension? - What are the main challenges for the COP22 in Morocco? What are the next big steps?

  5. REDD+ Crossroads Post Paris: Politics, Lessons and Interplays

    Directory of Open Access Journals (Sweden)

    Esteve Corbera

    2017-12-01

    Full Text Available This article introduces the special issue “REDD+ crossroads post Paris: politics, lessons and interplays”. The contributions to the special issue demonstrate, first, that REDD+ design in the studied countries has generally lacked social legitimacy and sidelined key actors that have an important role in shaping land-use sector dynamics. Second, they show that REDD+ early actions have tended to oversimplify local realities and have been misaligned with other policy goals and local needs. Third, REDD+ efforts have remained constrained to the forestry or climate mitigation policy sectors and have thus suffered from a lack of harmonization across local, national and international concerns, specifically of contradictory policy. As REDD+ moves from its preparedness to its implementation phase, more research efforts should be aimed at analysing the power relations that underpin and determine the design and implementation of REDD+ policies and actions, the potential for and limits to the vertical and horizontal harmonization of land-use policies and management, and the processes of resistance to or accommodation of REDD+ practices on the ground. In doing so, we advocate for multi-and transdisciplinary research that does not take for granted the benefits of REDD+ and which critically scrutinizes the multiple goals of this ambitious international policy framework, and where it sits within the broader Paris Agreement implementation agenda.

  6. Contribution of ozone to airborne aldehyde formation in Paris homes.

    Science.gov (United States)

    Rancière, Fanny; Dassonville, Claire; Roda, Célina; Laurent, Anne-Marie; Le Moullec, Yvon; Momas, Isabelle

    2011-09-15

    Indoor aldehydes may result from ozone-initiated chemistry, mainly documented by experimental studies. As part of an environmental investigation included in the PARIS birth cohort, the aim of this study was to examine ozone contribution to airborne aldehyde formation in Paris homes. Formaldehyde, acetaldehyde and hexaldehyde levels, as well as styrene, nitrogen dioxide and nicotine concentrations, comfort parameters and carbon dioxide levels, were measured twice during the first year of life of the babies. Ambient ozone concentrations were collected from the closest background station of the regional air monitoring network. Traffic-related nitrogen oxide concentrations in front of the dwellings were estimated by an air pollution dispersion model. Home characteristics and families' way of life were described by questionnaires. Stepwise multiple linear regression models were used to link aldehyde levels with ambient ozone concentrations and a few aldehyde precursors involved in oxidation reactions, adjusting for other indoor aldehyde sources, comfort parameters and traffic-related nitrogen oxides. A 4 and 11% increase in formaldehyde and hexaldehyde levels was pointed out when 8-hour ozone concentrations increased by 20 μg/m(3). The influence of potential precursors such as indoor styrene level and frequent use of air fresheners, containing unsaturated volatile organic compounds as terpenes, was also found. Thus, our results suggest that ambient ozone can significantly impact indoor air quality, especially with regard to formaldehyde and hexaldehyde levels. Copyright © 2011 Elsevier B.V. All rights reserved.

  7. -Climate: the key objectives of the Paris 2015 Agreement

    International Nuclear Information System (INIS)

    Damian, Michel; Abbas, Mehdi; Berthaud, Pierre

    2015-01-01

    The present article focuses on the already discernable key objectives of the climate agreement due to be signed in December 2015 in Paris, to come into force in 2020. The agreement - promoted by the G2 USA-China - will be based exclusively on 'national policies', turning its back on the first climate policy enshrined in the Kyoto Protocol, synonymous with an outdated, top-down architecture and hopes of a binding international agreement. All states, including those, such as China, which the Kyoto Protocol placed in the list of developing countries, are expected to propose 'intended nationally determined contributions' to cutting greenhouse gas emissions. These contributions are heterogeneous, with only modest medium-term targets, and not legally binding. The Paris Agreement will represent a turning point, heralding a new climate governance in the continuation of state-centered governance, but henceforth on a global scale. In other words the agreement will take into account the preferences of the 196 parties to the 1992 Framework Convention on Climate Change, in particular those of the most powerful among their number. We maintain that this agreement will change the course of climate change mitigation and adaptation for decades

  8. The German ''Energiewende''. Evaluation after the Paris-agreement; Die Deutsche Energiewende. Bewertung nach dem Klima-Abkommen von Paris

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Eike

    2016-08-01

    The World-Climate-Summit 2016 in Paris agreed to exacerbated goals for climate protection. This paper will scrutinize whether Germany can comply with its Paris-obligations by continuing the ongoing German ''Energiewende''. The result is clear-cut: The German ''Energiewende'' is inadequate. Due to the cap-and-trade system of the EU the '''Energiewende''.

  9. The German ''Energiewende''. Evaluation after the Paris-agreement; Die Deutsche Energiewende. Bewertung nach dem Klima-Abkommen von Paris

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Eike

    2016-12-15

    The World-Climate-Summit 2016 in Paris agreed to exacerbated goals for climate protection. This paper will scrutinize whether Germany can comply with its Paris-obligations by continuing the ongoing German ''Energiewende''. The result is clear-cut: The German ''Energiewende'' is inadequate. Due to the cap-and-trade system of the EU the ''Energiewende'' can in no way contribute to climate protection.

  10. Karl Marx and the Paris Commune of 1871: Tracing Traditions of Critical Pedagogy

    Science.gov (United States)

    McGray, Robert

    2014-01-01

    In 1871, citizens of the war torn arrondissements of Paris, in the face of traumatic political and military turmoil, established a new local form of government. The Paris Commune, as this government became known as in the English world, attracted attention for its alternative political-economic organization. One notable commentator was Karl Marx…

  11. Energy and Global Climate Change: The Road from Paris to Denver

    Energy Technology Data Exchange (ETDEWEB)

    Logan, Jeffrey

    2016-10-27

    This presentation provides an overview of the National Renewable Energy Laboratory; a snapshot of U.S. power sector transformation; a brief history of climate negotiations; an overview of the Paris Agreement; and what the Paris Agreement means for Colorado and beyond.

  12. Effect of Paris saponin on antitumor and immune function in U14 ...

    African Journals Online (AJOL)

    bearing mice, and reduced the serum IL-4 level. The Paris saponin can inhibit U14 cell growth and prolong survival time of mice; it is speculated that the Paris saponin may express its anti-tumor activity by improving the body's immune system.

  13. PARIS reprograms glucose metabolism by HIF-1α induction in dopaminergic neurodegeneration.

    Science.gov (United States)

    Kang, Hojin; Jo, Areum; Kim, Hyein; Khang, Rin; Lee, Ji-Yeong; Kim, Hanna; Park, Chi-Hu; Choi, Jeong-Yun; Lee, Yunjong; Shin, Joo-Ho

    2018-01-22

    Our previous study found that PARIS (ZNF746) transcriptionally suppressed transketolase (TKT), a key enzyme in pentose phosphate pathway (PPP) in the substantia nigra (SN) of AAV-PARIS injected mice. In this study, we revealed that PARIS overexpression reprogrammed glucose metabolic pathway, leading to the increment of glycolytic proteins along with TKT reduction in the SN of AAV-PARIS injected mice. Knock-down of TKT in differentiated SH-SY5Y cells led to an increase of glycolytic enzymes and decrease of PPP-related enzymes whereas overexpression of TKT restored PARIS-mediated glucose metabolic shift, suggesting that glucose metabolic alteration by PARIS is TKT-dependent. Inhibition of PPP by either PARIS overexpression or TKT knock-down elevated the level of H 2 O 2 , and diminished NADPH and GSH levels, ultimately triggering the induction of HIF-1α, a master activator of glycolysis. In addition, TKT inhibition by stereotaxic injection of oxythiamine demonstrated slight decrement of dopaminergic neurons (DNs) in SN but not cortical neurons in the cortex, suggesting that TKT might be a survival factor of DNs. In differentiated SH-SY5Y, cell toxicity by GFP-PARIS was partially restored by introduction of Flag-TKT and siRNA-HIF-1α. We also observed the increase of HIF-1α and glycolytic hexokinase 2 in the SN of Parkinson's disease patients. Taken together, these results suggest that PARIS accumulation might distort the balance of glucose metabolism, providing clues for understanding mechanism underlying selective DNs death by PARIS. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Pengelolaan Sumberdaya Air untuk Pengembangan Pariwisata di Pulau Pari, Kepulauan Seribu, DKI Jakarta

    Directory of Open Access Journals (Sweden)

    Roland Sinulingga

    2016-09-01

    Full Text Available ABSTRAK Penelitian bertujuan untuk (a menganalisis kondisi ketersediaan air di Pulau Pari, (b menganalisis kondisi kualitas air di Pulau Pari, (c menganalisis kebutuhan air dan proyeksinya untuk masa yang akan datang di Pulau Pari, dan (d merumuskan strategi pengelolaan sumberdaya air untuk pariwisata di Pulau Pari. Metode penelitian terdiri atas perhitungan neraca air, kebutuhan air, metode geometrik, analisis deskriptif, dan analisis SWOT. Pengambilan sampel air dan penduduk menggunakan metode purposive, sedangkan sampel wisatawan menggunakan metode accidental random sampling. Hasil akhir penelitian ketersediaan airtanah di Pulau Pari sebesar 290000,48 m3/tahun. Kualitas airtanah di lokasi penelitian tergolong baik. Besarnya kebutuhan air tahun 2013 sebesar 46381,947 m3/tahun. Pada tahun 2018 menjadi 54443,953 m3/tahun dan pada tahun 2023 mengalami peningkatan menjadi 63548,472 m3/tahun. Prioritas utama strategi pengelolaan sumberdaya air untuk pariwisata yaitu membuat kebijakan pembatasan pengunjung agar kelestarian pulau dan sumberdaya air tetap terjaga.   ABSTRACT This study aims to (a analyze water availability conditions in Pari Island, (b analyze the water quality conditions in Pari Island, (c analyze water demand and water projections for the future in Pari Island, and (d formulate strategies management water resources for tourism in Pari Island. The research method consists of the calculation of the water balance, water requirements, geometric methods, descriptive analysis, and SWOT analysis. Water sampling and settlement using purposive method, tourist’s samples using accidental random sampling. The final results of The amount of soil water availability in Pari Island of 290000,48 m3 / year. Groundwater quality in the study area are classified as good. The amount of water demand in 2013 amounted to 46381,947 m3 / year. In 2018 became 54443,953 m3 / year and in 2023 increased to 63548,472 m3 / year. First priority water resource

  15. 16. Paris Cosmology Colloquium 2012 - Slides of the presentations

    International Nuclear Information System (INIS)

    Lasenby, A.; Page, L.; Vega, H.J. de; Biermann, P.L.; Ma, E.; Laveder, M.; Kormendy, J.; Weinheimer, C.; Freeman, K.; Walker, M.; Conselice, C.J.; Rebolo, R.; Wehus, K.; Mirabel, F.; Serenelli, A.; Das, S.; Cooray, A.; Burigana, C.; Sanchez, N.G.; Mather, J.C.; Smoot, G.F.; Schmidt, B.P.; Tognini, M.A.

    2014-01-01

    Recently, Warm (keV scale) Dark Matter emerged impressively over CDM (Cold Dark Matter) as the leading Dark Matter candidate. In the context of this new Dark Matter situation, which implies novelties in the astrophysical, cosmological and keV particle physics context, this 16. Paris Colloquium 2012 is devoted to the LambdaWDM Standard Model of the Universe. The topics of the colloquium are as follows: -) observational and theoretical progress on the nature of dark matter: keV scale warm dark matter, -) large and small scale structure formation in agreement with observations at large scales and small galactic scales, and -) neutrinos in astrophysics and cosmology. This document gathers the slides of the presentations.

  16. LUTETIAN LIMESTONES IN THE PARIS REGION: PETROGRAPHIC AND COMPOSITIONAL EXAMINATION

    International Nuclear Information System (INIS)

    BLANC, A.; HOLMES, L.L.; HARBOTTLE, G.

    1998-01-01

    Stone for building and decorating monuments in the Paris Basin from antiquity to the present came from numerous quarries in the Lutetian limestone formations of the region. To identify specific-stone sources used for masonry and sculptures in these monuments, a team of geologists and archaeologists has investigated 300 quarries and collected 2,300 limestone samples for study in a collaborative effort by geologists and chemists. Petrographic and paleontologic examinations of thin sections enable geologists to distinguish the Tertiary Lutetian limestones from similar stone in Jurassic and Cretaceous strata. The methods of the geologist have been supplemented by those of the chemist whose compositional studies by neutron activation analysis can differentiate among the fine-grained upper Lutetian limestones extracted from specific ancient quarries

  17. NOGENT, just another power plant - but so close to Paris

    International Nuclear Information System (INIS)

    Fournel, Brigitte

    1993-01-01

    54 PWR type production units are today operating in France. Between 1980 and 1981, 11 units were under construction including both Nogent PWR-1300 units. The increasing consumption in the lie de France region in the early eighties affected the choice of the site so close to Paris on the banks of the Seine, not more than 95 km from Notre Dame Cathedral. In February 1975, the Champagne-Ardenne Regional Council gave a favourable opinion to installation of a nuclear power plant in the Marne or Seine valley. The location of the plant thus offered an economic opportunity to a region in which second homes were growing at the expense of primary residences. The Nogent plant is not the only one to be situated close to a city. One of the major concerns was related to the fact that the power plant was located on the banks of the river supplying Paris with drinking water. The plant has a geographical location whose political and media implications are Parisian, and thus national. Therefore, the plant was equipped with a public information centre which opened on 1st January 1988, and which in general receives some 20 000 visitors annually. It is located outside the controlled areas of the plant and access is free to all visitors. It gives a permanent exhibition on nuclear power and the Nogent plant in particular. Its auditorium can seat 120 for conferences and films on all subjects concerning nuclear power. The construction of the Information Centre cost 6 million francs. The visitors mainly come from the Paris region : many teachers bring their classes to find out about our installations. The EDF Divisions bring many notable visitors : foreign ministers, captains of industry, and any foreign nuclear company on an information visit to France. The opposition to Nogent comes mainly from Paris, in 1979 of a Committee for nuclear alternatives called Stop-Nogent was established. 1982,1983,1984 and 1985 were marked by strong action and local disputes, reported in the press (sabotage

  18. Revision of the Paris Convention and the Brussels Supplementary Convention

    International Nuclear Information System (INIS)

    Busekist, Otto von.

    1977-01-01

    The Paris Convention and the Brussels Supplementary Convention have in substance remained unchanged since their adoption in 1960 and 1963, respectively. During that period, nuclear industry and technology have developed considerably while the financial and monetary bases of the Conventions have been shattered. The amounts of liability and compensation have been eroded by inflation, and the gold-based unit of account in which these amounts are expressed has lost its original meaning after the abolition of the official gold price. The question of revising the Conventions, in particular of raising those amounts and of replacing the unit of account, is therefore being studied by the Group of Governmental Experts on Third party Liability in the Field of Nuclear Energy of the OECD Nuclear Energy Agency. (auth.) [fr

  19. Flexibility of the Paris Agreement on climate change

    International Nuclear Information System (INIS)

    Lemoine-Schonne, Marion

    2016-01-01

    The Paris agreement lays the foundation for a new international legal regime on climate change. To achieve a universal agreement, many compromises were made, reflected in the international agreement by signs of flexibility. Firstly, at the temporal level, a 'periodic review mechanism of the National Contributions' is set up. Concerning then the means of implementation of the agreement, a new 'mechanism for sustainable development' has been introduced. This mechanism aims to facilitate the implementation of international legal obligations with a logic of cost-effectiveness, reproducing in this sense the market mechanisms of the Kyoto Protocol. At least, at the normative level, flexibility of law is obvious in this agreement, in order to adapt norms to scientific knowledge evolution and political decisions

  20. Paris Agreement and opportunities for innovative nuclear power

    International Nuclear Information System (INIS)

    Tam, Cecilia

    2017-01-01

    How far can technology take us? Pushing energy technology to achieve carbon neutrality by 2060 could meet the mid-point of the range of ambitions expressed in Paris. Nuclear additions need to double current rate to meet 2DS. 2016 saw the highest nuclear capacity additions since 1990, but new construction starts down sharply. The fuel mix to generate electricity is vastly different to today. The average carbon intensity of power generation falls from around 520 gCO2/kWh today to Below zero in the B2DS. Nuclear innovation could also target need for decarbonised heat. Heating and cooling in industry and buildings accounts for more than 40% of final energy consumption and 30% of global CO2 emissions

  1. Paris and Vienna nuclear liability conventions: challenges for insurers

    International Nuclear Information System (INIS)

    Reitsma, S. M. S.

    2004-01-01

    Insurers have actively contributed to the negotiations on the revision of the Vienna Convention on Civil Liability for Nuclear Damage and the Paris Convention on Third Party Liability in the Field of Nuclear Energy. In the course of these negotiations they have pointed out that some of the proposals for revision may have consequences for insurers and could prove incapable of finding insurance support. This paper aims at explaining the revision related points, which could cause problems in respect of insurability. Furthermore, the writer takes the liberty to expand its scope to more generally include developments, which have the potential to influence the availability of insurance capacity. Therefore, also the insurance implications of terrorist acts combined with share market developments of recent years will be dealt with.(author)

  2. NOGENT, just another power plant - but so close to Paris

    Energy Technology Data Exchange (ETDEWEB)

    Fournel, Brigitte [Electricite de France (France)

    1993-07-01

    54 PWR type production units are today operating in France. Between 1980 and 1981, 11 units were under construction including both Nogent PWR-1300 units. The increasing consumption in the lie de France region in the early eighties affected the choice of the site so close to Paris on the banks of the Seine, not more than 95 km from Notre Dame Cathedral. In February 1975, the Champagne-Ardenne Regional Council gave a favourable opinion to installation of a nuclear power plant in the Marne or Seine valley. The location of the plant thus offered an economic opportunity to a region in which second homes were growing at the expense of primary residences. The Nogent plant is not the only one to be situated close to a city. One of the major concerns was related to the fact that the power plant was located on the banks of the river supplying Paris with drinking water. The plant has a geographical location whose political and media implications are Parisian, and thus national. Therefore, the plant was equipped with a public information centre which opened on 1st January 1988, and which in general receives some 20 000 visitors annually. It is located outside the controlled areas of the plant and access is free to all visitors. It gives a permanent exhibition on nuclear power and the Nogent plant in particular. Its auditorium can seat 120 for conferences and films on all subjects concerning nuclear power. The construction of the Information Centre cost 6 million francs. The visitors mainly come from the Paris region : many teachers bring their classes to find out about our installations. The EDF Divisions bring many notable visitors : foreign ministers, captains of industry, and any foreign nuclear company on an information visit to France. The opposition to Nogent comes mainly from Paris, in 1979 of a Committee for nuclear alternatives called Stop-Nogent was established. 1982,1983,1984 and 1985 were marked by strong action and local disputes, reported in the press (sabotage

  3. Research aspects in the Paris-Sud University, in 1988

    International Nuclear Information System (INIS)

    1988-01-01

    Some of the research works developed in the Paris-Sud University, in 1988, are reported. In this second volume, the following research papers are presented: the antiprogesterone; the English Channel Tunnel; the individual will concerning filiation; the glycannic variations of the α 1; the molecular phylogenies; the adrenergetical transmission and the β receptors; the organical phases and crystallogenesis in the carbonaceous biomineralizations; the quarks electric charge determination; the X-imagery; the regulation of the enzymatic activities by light in the superior vegetals; the chemical reaction dynamical analysis; the experiment report concerning heavy ions - high density plasma interactions; the 13 C/ 12 C isotopic splitting during photosynthesis; the articular prothesis methodology; and the public authorities and commerce in France [fr

  4. Parametrization of the scattering wave functions of the Paris potential

    International Nuclear Information System (INIS)

    Loiseau, B.; Mathelitsch, L.

    1996-10-01

    The neutron-proton scattering wave functions of the Paris nucleon-nucleon potential are parametrized for partial waves of total angular momenta less than 5. The inner parts of the wave functions are approximated by polynomials with a continuous transition to the outer parts, which are given by the asymptotic regime and determined by the respective phase shifts. The scattering wave functions can then be calculated at any given energy below 400 MeV. Special attention is devoted to the zero-energy limit of the low partial waves. An easy-to-use FORTRAN program, which allows the user to calculate these parametrized wave functions, is available via electronic mail. (author)

  5. Variability of air ion concentrations in urban Paris

    Science.gov (United States)

    Dos Santos, V. N.; Herrmann, E.; Manninen, H. E.; Hussein, T.; Hakala, J.; Nieminen, T.; Aalto, P. P.; Merkel, M.; Wiedensohler, A.; Kulmala, M.; Petäjä, T.; Hämeri, K.

    2015-12-01

    Air ion concentrations influence new particle formation and consequently the global aerosol as potential cloud condensation nuclei. We aimed to evaluate air ion concentrations and characteristics of new particle formation events (NPF) in the megacity of Paris, France, within the MEGAPOLI (Megacities: Emissions, urban, regional and Global Atmospheric Pollution and climate effects, and Integrated tools for assessment and mitigation) project. We measured air ion number size distributions (0.8-42 nm) with an air ion spectrometer and fine particle number concentrations (> 6 nm) with a twin differential mobility particle sizer in an urban site of Paris between 26 June 2009 and 4 October 2010. Air ions were size classified as small (0.8-2 nm), intermediate (2-7 nm), and large (7-20 nm). The median concentrations of small and large ions were 670 and 680 cm-3, respectively, (sum of positive and negative polarities), whereas the median concentration of intermediate ions was only 20 cm-3, as these ions were mostly present during new particle formation bursts, i.e. when gas-to-particle conversion produced fresh aerosol particles from gas phase precursors. During peaks in traffic-related particle number, the concentrations of small and intermediate ions decreased, whereas the concentrations of large ions increased. Seasonal variations affected the ion population differently, with respect to their size and polarity. NPF was observed in 13 % of the days, being most frequent in spring and late summer (April, May, July, and August). The results also suggest that NPF was favoured on the weekends in comparison to workdays, likely due to the lower levels of condensation sinks in the mornings of weekends (CS weekdays 09:00: 18 × 10-3 s-1; CS weekend 09:00: 8 × 10-3 s-1). The median growth rates (GR) of ions during the NPF events varied between 3 and 7 nm h-1, increasing with the ion size and being higher on workdays than on weekends for intermediate and large ions. The median GR of

  6. Method for strength calculating of structural elements of mobile machines for flash butt welding of rails

    Directory of Open Access Journals (Sweden)

    Andriy Valeriy Moltasov

    2017-12-01

    Full Text Available Purpose. The subject of this study is the strength of the loaded units of mobile machines for flash butt welding by refining high-strength rails. The theme of the work is related to the development of a technique for strength calculating of the insulation of the central axis of these machines. The aim of the paper is to establish the mathematical dependence of the pressure on the insulation on the magnitude of deflections of the central axis under the action of the upset force. Design/methodology/approach. Using the Mohr’s method, the displacements of the investigated sections of the central axis under the action of the upset force and the equivalent load distributed along the length of the insulation were calculated. The magnitude of the load distributed along the length of the insulation equivalent to the draft force was determined from the condition that the displacements of the same cross sections are equal under the action of this load and under the action of the upset force. Results. An analytical expression for establishing the relationship between the pressure acting on the insulation and the magnitude of the upset force and the geometric dimensions of the structural elements of the machine was obtained. Based on the condition of the strength of the insulation for crushing, an analytical expression for establishing the relationship between the length of insulation and the size of the upset force, the geometric dimensions of the structural elements of the machine, and the physical and mechanical properties of the insulation material was obtained. Originality/cost. The proposed methodology was tested in the calculation and design of the K1045 mobile rail welding machine, 4 of which is currently successfully used in the USA for welding rails in hard-to-reach places.

  7. Unravelling the magmatic system beneath a monogenetic volcanic complex (Jagged Rocks Complex, Hopi Buttes, AZ, USA)

    Science.gov (United States)

    Re, G.; Palin, J. M.; White, J. D. L.; Parolari, M.

    2017-12-01

    The Jagged Rocks complex is the eroded remnant of the plumbing systems of closely spaced monogenetic alkaline volcanic centres in the southern Hopi Buttes Volcanic Field (AZ, USA). It contains different clinopyroxene populations with distinctive textures and geochemical patterns. In the Northwestern part of the complex, which exposes the best developed system of conduits, most of the clinopyroxenes consist of large- to medium-sized resorbed cores overgrown by euhedral rims (type 1), small moderately resorbed greenish cores with the same overgrown rims (type 2), and phlogopite as an accessory phase. By contrast, in the Southern part of the complex the majority of clinopyroxenes are euhedral with oscillatory zonation (type 3) and are accompanied by minor euhedral olivine. The differences between these mineral assemblages indicate a composite history of crystallization and magmatic evolution for the two parts of the complex, governed by different mechanisms and ascent patterns from a single source at 50 km depth (16 kbar). The Northwest system preserves a high-pressure assemblage that cooled rapidly from near-liquidus conditions, suggesting direct ascent from the source to the surface at high-to-moderate transport rates (average 1.25 m/s). By contrast, the Southern system represents magma that advanced upward at much lower overall ascent rates, stalling at times to form small-volume mid-crustal storage zones (e.g., sills or a network of sheeted intrusions); this allowed the re-equilibration of the magma at lower pressure ( 30 km; 8 kbar), and led to nucleation and growth of euhedral clinopyroxene and olivine phenocrysts.

  8. EUROPEAN UNION IN GLOBAL CLIMATE GOVERNANCE: TO PARIS AND BEYOND

    Directory of Open Access Journals (Sweden)

    E. V. Savorskaya

    2016-01-01

    Full Text Available Since the 1990s, the European Union is aspiring global leadership in the area of climate change, which is refl ected in its active participation in the negotiations on the international climate change regime. However, those ambitions have not always turned out to be appropriate or justifi ed. Despite the fact that the European Union was able to achieve certain results during the Kyoto Protocol negotiations and even more signifi cant results in the process of its ratifi cation, for the most part EU negotiation strategy based on normative considerations, had not been successful, it was especially evident during the 2009 United Nations Climate Change Conference in Copenhagen. Partly the disappointing results of EU performance during the Copenhagen negotiations are to be blamed on some of the key features of EU functioning logic, for example, the overall tendency to rely on scientifi c evidence in policy-making, which did not allow the EU to assess other parties’ interests adequately. As the results of the negotiations of parties to the UNFCCC in December 2015 in Paris have shown, the European Union did manage to work out its previous mistakes and build a broad informal international coalition. Contrary to the pessimistic expectations, the agreement was adopted and it took into account quite a few of the EU proposals. However, the Paris Treaty has a number of fl aws and inaccuracies, so the ability to eliminate them in a timely manner by the international community and the EU in particular, will determine the future of the new international climate change regime.

  9. La Cité Universitaire Internationale de Paris

    Directory of Open Access Journals (Sweden)

    Sébastien Bureau

    2008-05-01

    Full Text Available La Cité Internationale Universitaire de Paris est le lieu où se concentrent le plus de résidences universitaires en Île-de-France avec une vocation affichée d’accueillir les étudiants et chercheurs du monde entier, et ce depuis 1925. Elle leur offre un ensemble de services centralisés et un cadre privilégié mais se considère avant tout comme un creuset pour la rencontre des cultures et la diffusion de la culture française parmi les élites intellectuelles internationales. Au-delà des intentions, nous avons cherché, par la rencontre de ses dirigeants et des résidents, à saisir d’une part, la réalité actuelle des échanges culturels promus par une politique du « brassage » et d’autre part, la dynamique de « l’espace vécu » des résidents.The Cité Internationale of Paris is the place where concentrate most university halls of residence in the French capital with a displayed vocation to welcome the students and the researchers of the whole world since 1925. It offers to them a set of centralized services and a privileged living environment but considers itself above all as a melting pot for the meeting of cultures and the spreading of French culture among international intellectual elites. Beyond intentions, we tried, by the meeting of managements and residents, to grasp the current reality of cultural exchanges thanks to the policy of the "mixing" and the dynamic of "the space lived" on residents.

  10. SUMOylation of the KRAB zinc-finger transcription factor PARIS/ZNF746 regulates its transcriptional activity

    International Nuclear Information System (INIS)

    Nishida, Tamotsu; Yamada, Yoshiji

    2016-01-01

    Parkin-interacting substrate (PARIS), a member of the family of Krüppel-associated box (KRAB)-containing zinc-finger transcription factors, is a substrate of the ubiquitin E3 ligase parkin. PARIS represses the expression of peroxisome proliferator-activated receptor γ coactivator-1α (PGC-1α), although the underlying mechanisms remain largely unknown. In the present study, we demonstrate that PARIS can be SUMOylated, and its SUMOylation plays a role in the repression of PGC-1a promoter activity. Protein inhibitor of activated STAT y (PIASy) was identified as an interacting protein of PARIS and shown to enhance its SUMOylation. PIASy repressed PGC-1a promoter activity, and this effect was attenuated by PARIS in a manner dependent on its SUMOylation status. Co-expression of SUMO-1 with PIASy completely repressed PGC-1a promoter activity independently of PARIS expression. PARIS-mediated PGC-1a promoter repression depended on the activity of histone deacetylases (HDAC), whereas PIASy repressed the PGC-1a promoter in an HDAC-independent manner. Taken together, these results suggest that PARIS and PIASy modulate PGC-1a gene transcription through distinct molecular mechanisms. -- Highlights: •PARIS can be SUMOylated in vivo and in vitro. •SUMOylation of PARIS functions in the repression of PGC-1a promoter activity. •PIASy interacts with PARIS and enhances its SUMOylation. •PIASy influences PARIS-mediated repression of PGC-1a promoter activity.

  11. SUMOylation of the KRAB zinc-finger transcription factor PARIS/ZNF746 regulates its transcriptional activity

    Energy Technology Data Exchange (ETDEWEB)

    Nishida, Tamotsu, E-mail: nishida@gene.mie-u.ac.jp; Yamada, Yoshiji

    2016-05-13

    Parkin-interacting substrate (PARIS), a member of the family of Krüppel-associated box (KRAB)-containing zinc-finger transcription factors, is a substrate of the ubiquitin E3 ligase parkin. PARIS represses the expression of peroxisome proliferator-activated receptor γ coactivator-1α (PGC-1α), although the underlying mechanisms remain largely unknown. In the present study, we demonstrate that PARIS can be SUMOylated, and its SUMOylation plays a role in the repression of PGC-1a promoter activity. Protein inhibitor of activated STAT y (PIASy) was identified as an interacting protein of PARIS and shown to enhance its SUMOylation. PIASy repressed PGC-1a promoter activity, and this effect was attenuated by PARIS in a manner dependent on its SUMOylation status. Co-expression of SUMO-1 with PIASy completely repressed PGC-1a promoter activity independently of PARIS expression. PARIS-mediated PGC-1a promoter repression depended on the activity of histone deacetylases (HDAC), whereas PIASy repressed the PGC-1a promoter in an HDAC-independent manner. Taken together, these results suggest that PARIS and PIASy modulate PGC-1a gene transcription through distinct molecular mechanisms. -- Highlights: •PARIS can be SUMOylated in vivo and in vitro. •SUMOylation of PARIS functions in the repression of PGC-1a promoter activity. •PIASy interacts with PARIS and enhances its SUMOylation. •PIASy influences PARIS-mediated repression of PGC-1a promoter activity.

  12. A novel weld seam detection method for space weld seam of narrow butt joint in laser welding

    Science.gov (United States)

    Shao, Wen Jun; Huang, Yu; Zhang, Yong

    2018-02-01

    Structured light measurement is widely used for weld seam detection owing to its high measurement precision and robust. However, there is nearly no geometrical deformation of the stripe projected onto weld face, whose seam width is less than 0.1 mm and without misalignment. So, it's very difficult to ensure an exact retrieval of the seam feature. This issue is raised as laser welding for butt joint of thin metal plate is widely applied. Moreover, measurement for the seam width, seam center and the normal vector of the weld face at the same time during welding process is of great importance to the welding quality but rarely reported. Consequently, a seam measurement method based on vision sensor for space weld seam of narrow butt joint is proposed in this article. Three laser stripes with different wave length are project on the weldment, in which two red laser stripes are designed and used to measure the three dimensional profile of the weld face by the principle of optical triangulation, and the third green laser stripe is used as light source to measure the edge and the centerline of the seam by the principle of passive vision sensor. The corresponding image process algorithm is proposed to extract the centerline of the red laser stripes as well as the seam feature. All these three laser stripes are captured and processed in a single image so that the three dimensional position of the space weld seam can be obtained simultaneously. Finally, the result of experiment reveals that the proposed method can meet the precision demand of space narrow butt joint.

  13. In-process monitoring and adaptive control for gap in micro butt welding with pulsed YAG laser

    International Nuclear Information System (INIS)

    Kawahito, Yousuke; Kito, Masayuki; Katayama, Seiji

    2007-01-01

    A gap is one of the most important issues to be solved in laser welding of a micro butt joint, because the gap results in welding defects such as underfilling or a non-bonded joint. In-process monitoring and adaptive control has been expected as one of the useful procedures for the stable production of sound laser welds without defects. The objective of this research is to evaluate the availability of in-process monitoring and adaptive control in micro butt welding of pure titanium rods with a pulsed neodymium : yttrium aluminium garnet (Nd : YAG) laser beam of a 150 μm spot diameter. It was revealed that a 45 μm narrow gap was detected by the remarkable jump in a reflected light intensity due to the formation of the molten pool which could bridge the gap. Heat radiation signal levels increased in proportion to the sizes of molten pools or penetration depths for the respective laser powers. As for adaptive control, the laser peak power was controlled on the basis of the reflected light or the heat radiation signals to stably produce a sound deeply penetrated weld reduced underfilling. In the case of a 100 μm gap, the underfilling was greatly reduced by half smaller than those made with a conventional rectangular pulse shape in seam welding as well as spot welding with a pulsed Nd : YAG laser beam. Consequently, the adaptive control of the laser peak power on the basis of in-process monitoring could reduce the harmful effects due to a gap in micro butt laser welding with a pulsed laser beam

  14. Monogenetic volcanoes fed by interconnected dikes and sills in the Hopi Buttes volcanic field, Navajo Nation, USA

    Science.gov (United States)

    Muirhead, James D.; Van Eaton, Alexa R.; Re, Giuseppe; White, James D. L.; Ort, Michael H.

    2016-01-01

    Although monogenetic volcanic fields pose hazards to major cities worldwide, their shallow magma feeders (networks. Analysis of vent alignments using the pyroclastic massifs and other eruptive centers (e.g., maar-diatremes) shows a NW-SE trend, parallel to that of dikes in the region. We therefore infer that dikes fed many of the eruptions. Dikes are also observed in places transforming to transgressive (ramping) sills. Estimates of the observable volume of dikes (maximum volume of 1.90 × 106 m3) and sills (minimum volume of 8.47 × 105 m3) in this study reveal that sills at Hopi Buttes make up at least 30 % of the shallow intruded volume (∼2.75 × 106 m3 total) within 350 m of the paeosurface. We have also identified saucer-shaped sills, which are not traditionally associated with monogenetic volcanic fields. Our study demonstrates that shallow feeders in monogenetic fields can form geometrically complex networks, particularly those intruding poorly consolidated sedimentary rocks. We conclude that the Hopi Buttes eruptions were primarily fed by NW-SE-striking dikes. However, saucer-shaped sills also played an important role in modulating eruptions by transporting magma toward and away from eruptive conduits. Sill development could have been accompanied by surface uplifts on the order of decimeters. We infer that the characteristic feeder systems described here for the Hopi Buttes may underlie monogenetic fields elsewhere, particularly where magma intersects shallow, and often weak, sedimentary rocks. Results from this study support growing evidence of the important role of shallow sills in active monogenetic fields.

  15. Butt pressure welding of wheels from vehicles consisting of steel and aluminium; Pressstumpfschweissen von Fahrzeugraedern aus Stahl und Aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Grobelin, K. [Hess Engineering AG, Frauenfeld (Switzerland)

    2001-07-01

    Every year in Europe 35 million wheels for vehicles are produced. Most of them are wheels consisting of metal tapes, both of steel and of aluminium alloys. The manufacturing of wheels is explained, in detail the method known as DC upset welding used for butt joints of wheel-rims. The engaged machinery, the specials of welding various materials, the limits of the method, and the quality assurance are discussed. Advantages of the applied method are joints of first-class quality, high productivity, energy saving and environmental cleanness. (orig.)

  16. Control of Precambrian basement deformation zones on emplacement of the Laramide Boulder batholith and Butte mining district, Montana, United States

    Science.gov (United States)

    Berger, Byron R.; Hildenbrand, Thomas G.; O'Neill, J. Michael

    2011-01-01

    What are the roles of deep Precambrian basement deformation zones in the localization of subsequent shallow-crustal deformation zones and magmas? The Paleoproterozoic Great Falls tectonic zone and its included Boulder batholith (Montana, United States) provide an opportunity to examine the importance of inherited deformation fabrics in batholith emplacement and the localization of magmatic-hydrothermal mineral deposits. Northeast-trending deformation fabrics predominate in the Great Falls tectonic zone, which formed during the suturing of Paleoproterozoic and Archean cratonic masses approximately 1,800 mega-annum (Ma). Subsequent Mesoproterozoic to Neoproterozoic deformation fabrics trend northwest. Following Paleozoic through Early Cretaceous sedimentation, a Late Cretaceous fold-and-thrust belt with associated strike-slip faulting developed across the region, wherein some Proterozoic faults localized thrust faulting, while others were reactivated as strike-slip faults. The 81- to 76-Ma Boulder batholith was emplaced along the reactivated central Paleoproterozoic suture in the Great Falls tectonic zone. Early-stage Boulder batholith plutons were emplaced concurrent with east-directed thrust faulting and localized primarily by northwest-trending strike-slip and related faults. The late-stage Butte Quartz Monzonite pluton was localized in a northeast-trending pull-apart structure that formed behind the active thrust front and is axially symmetric across the underlying northeast-striking Paleoproterozoic fault zone, interpreted as a crustal suture. The modeling of potential-field geophysical data indicates that pull-apart?stage magmas fed into the structure through two funnel-shaped zones beneath the batholith. Renewed magmatic activity in the southern feeder from 66 to 64 Ma led to the formation of two small porphyry-style copper-molybdenum deposits and ensuing world-class polymetallic copper- and silver-bearing veins in the Butte mining district. Vein orientations

  17. A Methodology for the Assessment of Unconventional (Continuous) Resources with an Application to the Greater Natural Buttes Gas Field, Utah

    International Nuclear Information System (INIS)

    Olea, Ricardo A.; Cook, Troy A.; Coleman, James L.

    2010-01-01

    The Greater Natural Buttes tight natural gas field is an unconventional (continuous) accumulation in the Uinta Basin, Utah, that began production in the early 1950s from the Upper Cretaceous Mesaverde Group. Three years later, production was extended to the Eocene Wasatch Formation. With the exclusion of 1100 non-productive ('dry') wells, we estimate that the final recovery from the 2500 producing wells existing in 2007 will be about 1.7 trillion standard cubic feet (TSCF) (48.2 billion cubic meters (BCM)). The use of estimated ultimate recovery (EUR) per well is common in assessments of unconventional resources, and it is one of the main sources of information to forecast undiscovered resources. Each calculated recovery value has an associated drainage area that generally varies from well to well and that can be mathematically subdivided into elemental subareas of constant size and shape called cells. Recovery per 5-acre cells at Greater Natural Buttes shows spatial correlation; hence, statistical approaches that ignore this correlation when inferring EUR values for untested cells do not take full advantage of all the information contained in the data. More critically, resulting models do not match the style of spatial EUR fluctuations observed in nature. This study takes a new approach by applying spatial statistics to model geographical variation of cell EUR taking into account spatial correlation and the influence of fractures. We applied sequential indicator simulation to model non-productive cells, while spatial mapping of cell EUR was obtained by applying sequential Gaussian simulation to provide multiple versions of reality (realizations) having equal chances of being the correct model. For each realization, summation of EUR in cells not drained by the existing wells allowed preparation of a stochastic prediction of undiscovered resources, which range between 2.6 and 3.4 TSCF (73.6 and 96.3 BCM) with a mean of 2.9 TSCF (82.1 BCM) for Greater Natural Buttes

  18. 3-D Characteristics of the Residual Stress in the Plate Butt Weld Between SA508 and F316L SS

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kyoung Soo; Kim, Tae Ryong [Korea Electric Power Research Institute, Daejeon (Korea, Republic of); Park, Jai Hak [Chungbuk National University, Cheongju (Korea, Republic of); Kim, Man Won [GNEC, Daejeon (Korea, Republic of); Cho, Seon Yeong [KLES, Daejeon (Korea, Republic of)

    2009-04-15

    This study is performed to check the three dimensional characteristics of residual stress in the dissimilar metal weld. Although two dimensional analysis has been widely used for the assessment of weld residual stress, it has limitations to understand the stress distribution of the third direction. 3-D analysis was done to understand residual stress distribution of the welded plate. A simple butt-welded plate was considered to show the stress variation on all direction. A mock-up plate weldment was fabricated with SA-508 and F316L, which are widely used in nuclear power plants. The analysis results were validated with the measured values in the mock-up.

  19. Integrated FEM-DBEM simulation of crack propagation in AA2024-T3 FSW butt joints considering manufacturing effects

    DEFF Research Database (Denmark)

    Sonne, Mads Rostgaard; Carlone, P.; Citarella, R.

    2015-01-01

    This paper deals with a numerical and experimental investigation on the influence of residual stresses on fatigue crack growth in AA2024-T3 friction stir welded butt joints. An integrated FEM-DBEM procedure for the simulation of crack propagation is proposed and discussed. A numerical FEM model...... of the welding process of precipitation hardenable AA2024-T3 aluminum alloy is employed to infer the process induced residual stress field. The reliability of the FEM simulations with respect to the induced residual stresses is assessed comparing numerical outcomes with experimental data obtained by means...

  20.  Ischemic Stroke Secondary to Aortic Dissection Following Rifle Butt Recoil Chest Injury: A Case Report

    Directory of Open Access Journals (Sweden)

    John Valiath

    2011-11-01

    Full Text Available  Ischemic stroke secondary to aortic dissection is not uncommon. We present a patient with left hemiplegia secondary to Stanford type A aortic dissection extending to the supra-aortic vessels, which was precipitated by rifle butt recoil chest injury. The diagnosis of aortic dissection was delayed due to various factors. Finally, the patient underwent successful Bentall procedure with complete resolution of symptoms. This case emphasizes the need for caution in the use of firearms for recreation and to take precautions in preventing such incidents. In addition, this case illustrates the need for prompt cardiovascular physical examination in patients presenting with stroke.

  1. Tool material effect on the friction stir butt welding of AA2124-T4 Alloy Matrix MMC

    Directory of Open Access Journals (Sweden)

    Yahya Bozkurt

    2018-01-01

    Full Text Available The purpose of the present work is to study on the effect of material properties tool on friction stir butt welding of AA2124-T4 alloy matrix MMC. Uncoated tool, coated tool with a CrN, and coated tool with AlTiN were used to weld aluminum MMC plates. Macrostructure and microstructure observations, ultimate tensile strength, wear resistance, and chemical analysis were carried out to determine the appropriate tool for joining these composite plates. Results showed that the good welded joints could be obtained when a tool is coated with AlTiN.

  2. Aluminum 6060-T6 friction stir welded butt joints: fatigue resistance with different tools and feed rates

    International Nuclear Information System (INIS)

    Baragetti, S.; D'Urso, G.

    2014-01-01

    The fatigue behavior of AA6060-T6 friction stir welded butt joints was investigated. The joints were produced by using both a standard and a threaded tri-flute cylindrical-tool with flat shoulder. The friction stir welding process was carried out using different feed rates. Preliminary tensile tests, micrograph analyses and hardness profile measurements across the welds were carried out. Welded and unwelded fatigue samples were tested under axial loading (R = 0.1) with upper limits of 10 4 and 10 5 cycles, using threaded and unthreaded (standard) tools at different feed rates. The best tensile and fatigue performance was obtained using the standard tool at low feed rate.

  3. [Development strategy of Paris based on combination of domestic patent and current resource application and development].

    Science.gov (United States)

    Zhao, Fei-Ya; Tao, Ai-En; Xia, Cong-Long

    2018-01-01

    Paris is a commonly used traditional Chinese medicine (TCM), and has antitumor, antibacterial, sedative, analgesic and hemostatic effects. It has been used as an ingredient of 81 Chinese patent medicines, with a wide application and large market demand. Based on the data retrieved from state Intellectual Property Office patent database, a comprehensive analysis was made on Paris patents, so as to explore the current features of Paris patents in the aspects of domestic patent output, development trend, technology field distribution, time dimension, technology growth rate and patent applicant, and reveal the development trend of China's Paris industry. In addition, based on the current Paris resource application and development, a sustainable, multi-channel and multi-level industrial development approach was built. According to the results, studies of Paris in China are at the rapid development period, with a good development trend. However, because wild Paris resources tend to be exhausted, the studies for artificial cultivation technology should be strengthened to promote the industrial development. Copyright© by the Chinese Pharmaceutical Association.

  4. PINK1 Primes Parkin-Mediated Ubiquitination of PARIS in Dopaminergic Neuronal Survival

    Directory of Open Access Journals (Sweden)

    Yunjong Lee

    2017-01-01

    Full Text Available Mutations in PTEN-induced putative kinase 1 (PINK1 and parkin cause autosomal-recessive Parkinson’s disease through a common pathway involving mitochondrial quality control. Parkin inactivation leads to accumulation of the parkin interacting substrate (PARIS, ZNF746 that plays an important role in dopamine cell loss through repression of proliferator-activated receptor gamma coactivator-1-alpha (PGC-1α promoter activity. Here, we show that PARIS links PINK1 and parkin in a common pathway that regulates dopaminergic neuron survival. PINK1 interacts with and phosphorylates serines 322 and 613 of PARIS to control its ubiquitination and clearance by parkin. PINK1 phosphorylation of PARIS alleviates PARIS toxicity, as well as repression of PGC-1α promoter activity. Conditional knockdown of PINK1 in adult mouse brains leads to a progressive loss of dopaminergic neurons in the substantia nigra that is dependent on PARIS. Altogether, these results uncover a function of PINK1 to direct parkin-PARIS-regulated PGC-1α expression and dopaminergic neuronal survival.

  5. Stress Distribution in the Dissimilar Metal Butt Weld of Nuclear Reactor Piping due to the Simulation Technique for the Repair Welding

    International Nuclear Information System (INIS)

    Lee, Hweeseung; Huh, Namsu; Kim, Jinsu; Lee, Jinho

    2013-01-01

    During welding, the dissimilar metal butt welds of nuclear piping are typically subjected to repair welding in order to eliminate defects that are found during post-weld inspection. It has been found that the repair weld can significantly increase the tensile residual stress in the weldment, and therefore, accurate estimation of the weld residual stress due to repair weld, especially for dissimilar metal welds using Ni-based alloy 82/182 in nuclear components, is of great importance in order to assess susceptibility to primary water stress corrosion cracking. In the present study, the stress distributions of dissimilar metal butt welds in nuclear reactor piping subjected to repair weld were investigated based on detailed nonlinear finite element analyses. Particular emphasis was placed on the variation of the stress distribution in the dissimilar metal butt weld according to the finite element welding analysis sequence for the repair welding process

  6. Busted Butte Phase 2: Analysis of Post-Test Mineback and Overcore Rock Samples

    International Nuclear Information System (INIS)

    Turin, H.J.; McGraw, M.A.; Jones, C.L.; Scism, C.D.; Soll, W.E.

    2002-01-01

    A complex tracer mixture was injected continuously for over two years into a 10 x 10 x 7 m block of tuff as part of the unsaturated-zone (UZ) tracer test at Busted Butte. The test was designed to address uncertainties associated with flow and transport models within the Topopah Springs and Calico Hills tuffs. The tracer mixture included nonreactive (Br, I, and FBAs) and reactive tracers (Li, Ce, Sm, Ni, Coy and Mn) and synthetic colloids. Once injection was completed, samples from the block were collected in two ways. Overcores were taken from around and below injection holes. Then, the entire block was excavated via mineback--during which progressive vertical planes of the block were exposed. Samples from the overcores and mineback were analyzed to determine the distribution of tracers on different spatial scales than available from collection borehole data. Rock analyses confirmed collection pad results that the nonreactive tracers, Br and FBAs, moved several meters. Furthermore, Br and FBAs are observed above and lateral to the injector planes suggesting that capillarity was an important process for tracer movement. Lithium, the most mobile of the metals, was transported on a scale of meters. This is consistent with laboratory sorption measurements and observed breakthrough on the collection pads. Co and Ni show transport distances of tens of cm, while Sm and Ce moved far less, possibly due to precipitation and sorption effects. Colloid transport was assessed using 1 ft3 blocks extracted from the BB Phase 2 block. In the Calico Hills material, after 15 L of water was injected over 3.5 months, less than 1% of the colloids injected were recovered. Flow patterns in the block indicate that water injected at the center imbibed outward from the injection point. In a block taken from a boundary of the Calico Hills ashfall layer, breakthrough was observed only due to fractures formed during drying of the block. The colloid transport module for FEHM was tested against

  7. Geologic map of the Strawberry Butte 7.5’ quadrangle, Meagher County, Montana

    Science.gov (United States)

    Reynolds, Mitchell W.; Brandt, Theodore R.

    2017-06-19

    The 7.5′ Strawberry Butte quadrangle in Meagher County, Montana near the southwest margin of the Little Belt Mountains, encompasses two sharply different geologic terranes.  The northern three-quarters of the quadrangle are underlain mainly by Paleoproterozoic granite gneiss, across which Middle Cambrian sedimentary rocks rest unconformably.  An ancestral valley of probable late Eocene age, eroded northwest across the granite gneiss terrane, is filled with Oligocene basalt and overlying Miocene and Oligocene sandstone, siltstone, tuffaceous siltstone, and conglomerate.  The southern quarter of the quadrangle is underlain principally by deformed Mesoproterozoic sedimentary rocks of the Newland Formation, which are intruded by Eocene biotite hornblende dacite dikes.  In this southern terrane, Tertiary strata are exposed only in a limited area near the southeast margin of the quadrangle.  The distinct terranes are juxtaposed along the Volcano Valley fault zone—a zone of recurrent crustal movement beginning possibly in Mesoproterozoic time and certainly established from Neoproterozoic–Early Cambrian to late Tertiary time.  Movement along the fault zone has included normal faulting, the southern terrane faulted down relative to the northern terrane, some reverse faulting as the southern terrane later moved up against the northern terrane, and lateral movement during which the southern terrane likely moved west relative to the northern terrane.  Near the eastern margin of the quadrangle, the Newland Formation is locally the host of stratabound sulfide mineralization adjacent to the fault zone; west along the fault zone across the remainder of the quadrangle are significant areas and bands of hematite and iron-silicate mineral concentrations related to apparent alteration of iron sulfides.  The map defines the distribution of a variety of surficial deposits, including the distribution of hematite-rich colluvium and iron-silicate boulders.  The southeast

  8. Busted Butte report on laboratory radionuclide migration experiments in non-welded tuff under unsaturated conditions

    Energy Technology Data Exchange (ETDEWEB)

    Vandergraaf, T.T.; Drew, D.J.; Ticknor, K.V

    2002-11-01

    Three blocks of non-welded tuff, one nominally one cubic foot (trial block) and the other two, nominally one cubic metre (1 m{sup 3}), were excavated from the Busted Butte Test Facility on the Nevada Test Site and transported to the Atomic Energy of Canada Limited Whiteshell Laboratories in Pinawa, Manitoba. The trial block and one of the 1-m{sup 3} blocks were used for unsaturated flow experiments. The remaining 1-m{sup 3} block is being used for saturated flow experiments and will be reported on separately. After a vertical flow of synthetic transport solution was set up under unsaturated conditions, a suite of conservative and chemically reactive radionuclide tracers was injected at volumetric flow rates of 20 mL/hr in the trial block, and 10 mL/hr in the 1-m{sup 3} block. The duration of the migration experiment in the trial block was 87 days, while the migration experiment in the 1-m{sup 3} block was continuing after 600 days. Results obtained from the migration experiment in the trial block showed that transport of {sup 95m+99}Tc, injected as the pertechnetate (an)ion, was slightly faster than that of the transport solution, using tritiated water ({sup 3}H{sub 2}O) as a flow indicator. Retardation of {sup 237}Np was consistent with that predicted from results obtained in supporting static batch sorption studies. Post-migration analysis of the flow field in the trial block showed that the front of the {sup 22}Na had migrated about half the distance through the block, and that {sup 60}Co and {sup 137}Cs had been retained near the inlet. This observation agrees qualitatively with that predicted from the results from static batch sorption studies. In the larger scale experiment, the transport behavior of Tc is very similar to that of the transport solution at this point in time. None of the other radionuclide tracers have been detected in water collected from this block. This observation is consistent with the observations for the smaller block. (author)

  9. Microstructure feature of friction stir butt-welded ferritic ductile iron

    International Nuclear Information System (INIS)

    Chang, Hung-Tu; Wang, Chaur-Jeng; Cheng, Chin-Pao

    2014-01-01

    Highlights: • Defect-free ferritic ductile iron joints is fabricated by FSW. • The welding nugget is composed of graphite, martensite, and recrystallized ferrite. • The graphite displays a striped pattern in the surface and advancing side. • The ferritic matrix transforms into martensite structure during welding. • High degree of plastic deformation is found on the advancing side. - Abstract: This study conducted friction stir welding (FSW) by using the butt welding process to join ferritic ductile iron plates and investigated the variations of microsturcture in the joined region formed after welding. No defects appeared in the resulting experimental weld, which was formed using a 3-mm thick ductile iron plate and tungsten carbide alloy stir rod to conduct FSW at a rotational speed of 982 rpm and traveling speed of 72 mm/min. The welding region was composed of deformed graphite, martensite phase, and dynamically recrystallized ferrite structures. In the surface region and on the advancing side (AS), the graphite displayed a striped configuration and the ferritic matrix transformed into martensite. On the retreating side (RS), the graphite surrounded by martensite remained as individual granules and the matrix primarily comprised dynamically recrystallized ferrite. After welding, diffusion increased the carbon content of the austenite around the deformed graphite nodules, which transformed into martensite during the subsequent cooling process. A micro Vickers hardness test showed that the maximum hardness value of the martensite structures in the weld was approximately 800 HV. An analysis using an electron probe X-ray microanalyzer (EPMA) indicated that its carbon content was approximately 0.7–1.4%. The peak temperature on the RS, 8 mm from the center of the weld, measured 630 °C by the thermocouple. Overall, increased severity of plastic deformation and process temperature near the upper stir zone (SZ) resulted in distinct phase transformation

  10. Experience of the Paris Research Consortium Climate-Environment-Society

    Science.gov (United States)

    Joussaume, Sylvie; Pacteau, Chantal; Vanderlinden, Jean Paul

    2016-04-01

    It is now widely recognized that the complexity of climate change issues translates itself into a need for interdisciplinary approaches to science. This allows to first achieve a more comprehensive vision of climate change and, second, to better inform the decision-making processes. However, it seems that willingness alone is rarely enough to implement interdisciplinarity. The purpose of this presentation is to mobilize reflexivity to revisit and analyze the experience of the Paris Consortium for Climate-Environment-Society. The French Consortium Climate-Environment-Society aims to develop, fund and coordinate interdisciplinary research into climate change and its impacts on society and environment. Launched in 2007, the consortium relies on the research expertise of 17 laboratories and federation in the Paris area working mainly in the fields of climatology, hydrology, ecology, health sciences, and the humanities and social sciences. As examples, economists and climatologists have studied greenhouse gas emission scenarios compatible with climate stabilization goals. Historical records have provided both knowledge about past climate change and vulnerability of societies. Some regions, as the Mediterranean and the Sahel, are particularly vulnerable and already have to cope with water availability, agricultural production and even health issues. A project showed that millet production in West Africa is expected to decline due to warming in a higher proportion than observed in recent decades. Climate change also raises many questions concerning health: combined effects of warming and air quality, impacts on the production of pollens and allergies, impacts on infectious diseases. All these issues lead to a need for approaches integrating different disciplines. Furthermore, climate change impacts many ecosystems which, in turn, affect its evolution. Our experience shows that interdisciplinarity supposes, in order to take shape, the conjunction between programming

  11. Biological effects of particles from the paris subway system.

    Science.gov (United States)

    Bachoual, Rafik; Boczkowski, Jorge; Goven, Delphine; Amara, Nadia; Tabet, Lyes; On, Dinhill; Leçon-Malas, Véronique; Aubier, Michel; Lanone, Sophie

    2007-10-01

    Particulate matter (PM) from atmospheric pollution can easily deposit in the lungs and induce recruitment of inflammatory cells, a source of inflammatory cytokines, oxidants, and matrix metalloproteases (MMPs), which are important players in lung structural homeostasis. In many large cities, the subway system is a potent source of PM emission, but little is known about the biological effects of PM from this source. We performed a comprehensive study to evaluate the biological effects of PM sampled at two sites (RER and Metro) in the Paris subway system. Murine macrophages (RAW 264.7) and C57Bl/6 mice, respectively, were exposed to 0.01-10 microg/cm2 and 5-100 microg/mouse subway PM or reference materials [carbon black (CB), titanium dioxide (TiO2), or diesel exhaust particles (DEPs)]. We analyzed cell viability, production of cellular and lung proinflammatory cytokines [tumor necrosis factor alpha (TNFalpha), macrophage inflammatory protein (MIP-2), KC (the murin analog of interleukin-8), and granulocyte macrophage-colony stimulating factor (GM-CSF)], and mRNA or protein expression of MMP-2, -9, and -12 and heme oxygenase-1 (HO-1). Deferoxamine and polymixin B were used to evaluate the roles of iron and endotoxin, respectively. Noncytotoxic concentrations of subway PM (but not CB, TiO2, or DEPs) induced a time- and dose-dependent increase in TNFalpha and MIP-2 production by RAW 264.7 cells, in a manner involving, at least in part, PM iron content (34% inhibition of TNF production 8 h after stimulation of RAW 264.7 cells with 10 microg/cm2 RER particles pretreated with deferoxamine). Similar increased cytokine production was transiently observed in vivo in mice and was accompanied by an increased neutrophil cellularity of bronchoalveolar lavage (84.83+/-0.98% of polymorphonuclear neutrophils for RER-treated mice after 24 h vs 7.33+/-0.99% for vehicle-treated animals). Subway PM induced an increased expression of MMP-12 and HO-1 both in vitro and in vivo. PM from the

  12. PENGARUH BESAR ARUS LISTRIK DENGAN MENGGUNAKAN ELEKTRODA SMAW TERHADAP KEKUATAN SAMBUNGAN LAS BUTT JOINT PADA PLAT MILD STEEL

    Directory of Open Access Journals (Sweden)

    Sarjito Jokosisworo

    2012-03-01

    Full Text Available The influence of mechanic disposition, is one of the factor influence ship strength. This influence can be test by mechanical test in welding butt joint. The result test database analysis can be conclude that very helpful to increase safety and quality butt joint. With steel specification C= 0,15%, Si= 0,24%, Mn= 0,88%,P= 0,018%, S= 0,034%. This material give a 90, 110, 125 ampere with SMAW AC electrode diameter 3,2 mm x 350 mm with V root and 600 angle In the fabrication of mild steel products, components or equipment, manufacturers employ welding as the principal joining method. Mild steel are weldable materials, and a welded joint can provide optimum corrosion resistance, strength, and fabrication economy. However, designers should recognize that any metal, including stainless steels, may undergo certain changes during welding. It is necessary, therefore, to exercise a reasonable degree of care during welding to minimize or prevent any deleterious effects that may occur, and to preserve the same degree of corrosion resistance and strength in weld zone that is an intheren part of the base metal

  13. Special metallurgy - the electrical butt-welding by flashing of sintered magnesium-magnesium oxide composites (1963)

    International Nuclear Information System (INIS)

    Charleux, J.

    1963-01-01

    Electrical resistance welding has become quite important since World War II because of the need of a high yield in aeronautical production. Progress has been due in particular to the improvements made in electronically controlled apparatus making possible the automatic control of welding. For the butt-welding of sections requiring either a high production rate or a high quality weld, the flash butt-welding system has been very much developed these last few years. The use of this welding method is of great importance in the field of the bonding of oxidisable metals such as magnesium or aluminium and its alloys, because the welded joint is free from oxides. This study consists of general considerations on the flash-welding process with regard to temperature distribution in the parts during welding, and to electrical phenomena connected with flashing. Besides this general or theoretical section, we have applied the welding process to the bonding of sintered magnesium, a magnesium-magnesium oxide composite, whose use as a structural element in nuclear reactors is considered. (author) [fr

  14. Climate - 30 questions to understand the Paris Conference

    International Nuclear Information System (INIS)

    Canfin, Pascal; Staime, Peter

    2015-01-01

    The authors, who participate in the negotiations on climate, propose an analysis and a description of the various geopolitical, economic and financial challenges which are part of the next conference on climate (Conference of Parties, COP 21) which is to take place in France in December 2015. They notably discuss to which extent France is an example, what Obama can do, why things are changing in China, who are the opponents in the struggle against climate change. While one of the main issue of this conference, and the possible cause of its failure, will be the financial issue, and particularly the promise made in 2009 to mobilise 100 billions dollars every year in favour of developing countries which are the most impacted by global warming, in an interview, one of the author evokes the content of his book: he discusses the general consensus about the human origin of climate change, evokes fossil industries and oil producing countries as opponents to an energy revolution, outlines that energy transition is at the heart of what he calls the Battle of Paris (the conference), outlines the important role France can play despite some weaknesses of its climate policy, the new momentum given by China and the USA. He considers low carbon economy as the main world challenge on the long term

  15. Running from Paris to Beijing: biomechanical and physiological consequences.

    Science.gov (United States)

    Millet, Guillaume Y; Morin, Jean-Benoît; Degache, Francis; Edouard, Pascal; Feasson, Léonard; Verney, Julien; Oullion, Roger

    2009-12-01

    The purpose of this study was to examine the physiological and biomechanical changes occurring in a subject after running 8,500 km in 161 days (i.e. 52.8 km daily). Three weeks before, 3 weeks after (POST) and 5 months after (POST+5) running from Paris to Beijing, energy cost of running (Cr), knee flexor and extensor isokinetic strength and biomechanical parameters (using a treadmill dynamometer) at different velocities were assessed in an experienced ultra-runner. At POST, there was a tendency toward a 'smoother' running pattern, as shown by (a) a higher stride frequency and duty factor, and a reduced aerial time without a change in contact time, (b) a lower maximal vertical force and loading rate at impact and (c) a decrease in both potential and kinetic energy changes at each step. This was associated with a detrimental effect on Cr (+6.2%) and a loss of strength at all angular velocities for both knee flexors and extensors. At POST+5, the subject returned to his original running patterns at low but not at high speeds and maximal strength remained reduced at low angular velocities (i.e. at high levels of force). It is suggested that the running pattern changes observed in the present study were a strategy adopted by the subject to reduce the deleterious effects of long distance running. However, the running pattern changes could partly be linked to the decrease in maximal strength.

  16. Lorenz Oken and Naturphilosophie in Jena, Paris and London.

    Science.gov (United States)

    Breidbach, Olaf; Ghiselin, Michael T

    2002-01-01

    Although Lorenz Oken is a classic example of Naturphilosophie as applied to biology, his views have been imperfectly understood. He is best viewed as a follower of Schelling who consistently attempted to apply Schelling's ideas to biological data. His version of Naturphilosophic, however, was strongly influenced by older pseudoscience traditions, especially alchemy and numerology as they had been presented by Robert Fludd, whose works were current in Jena and available to him. According to those influences, parts of Oken's philosophical conception were communicable even in a non-idealistic scientific culture, for example in Paris, where Oken met Etienne Geoffroy Saint-Hilaire. Geoffroy however was embedded in a French intellectual tradition, and the correspondence between his views and those of Oken was only superficial. The English anatomist Richard Owen attempted to incorporate the views of Oken and Geoffroy within his own, idiosyncratic system. Although Darwin knew of Oken's ideas, it was Geoffroy who really affected his evolutionary biology, and any influence of Oken must have been attenuated to the point of triviality.

  17. An American termite in Paris: temporal colony dynamics.

    Science.gov (United States)

    Baudouin, Guillaume; Dedeine, Franck; Bech, Nicolas; Bankhead-Dronnet, Stéphanie; Dupont, Simon; Bagnères, Anne-Geneviève

    2017-12-01

    Termites of the genus Reticulitermes are widespread invaders, particularly in urban habitats. Their cryptic and subterranean lifestyle makes them difficult to detect, and we know little about their colony dynamics over time. In this study we examined the persistence of Reticulitermes flavipes (Kollar) colonies in the city of Paris over a period of 15 years. The aim was (1) to define the boundaries of colonies sampled within the same four areas over two sampling periods, (2) to determine whether the colonies identified during the first sampling period persisted to the second sampling period, and (3) to compare the results obtained when colonies were delineated using a standard population genetic approach versus a Bayesian clustering method that combined both spatial and genetic information. Herein, colony delineations were inferred from genetic differences at nine microsatellite loci and one mitochondrial locus. Four of the 18 identified colonies did not show significant differences in their genotype distributions between the two sampling periods. While allelic richness was low, making it hard to reliably distinguish colony family type, most colonies appeared to retain the same breeding structure over time. These large and expansive colonies showed an important ability to fuse (39% were mixed-family colonies), contained hundreds of reproductives and displayed evidence of isolation-by-distance, suggesting budding dispersal. These traits, which favor colony persistence over time, present a challenge for pest control efforts, which apply treatment locally. The other colonies showed significant differences, but we cannot exclude the possibility that their genotype distributions simply changed over time.

  18. Gambling in revolutionary Paris - The Palais Royal: 1789-1838.

    Science.gov (United States)

    Barnhart, R T

    1992-06-01

    By the revolution of 1789, the four-story, quadrangular Palais Royal in Paris had become the most glittering tourist center of Europe, with 180 shops and cafes in its ground floor arcades. By 1791, its basement and secondary story contained over 100 separate, illicit gambling operations featuring the most popular dice and card games. The mania for gambling had been transferred from defunct, monarchical Versailles to the thriving, bourgeois Palais Royal, where the five main gaming clubs throbbed from noon till midnight. During the Revolution, Prince Talleyrand won 30,000 francs at one club, and after Waterloo in 1815, Marshal Blucher lost 1,500,000 francs in one night at another. To bring the situation under control and raise taxes for the state, in 1806 Napoleon legalized the main clubs, which from 1819 to 1837 grossed an enormous 137 million francs. When the anti-gambling forces triumphed in 1837 and the clubs were closed down, the National Guard had to be called out to evict the mobs of gamblers who refused to leave the tables. Dramatic reports from Revolutionary police raids, and quotations from the memoirs of humorous French gamblers and shocked foreign visitors, provide anecdotal illustrations of the 49 years during which the Palais Royal was the most intriguing and picturesque gambling mecca of Europe-and probably of the world.

  19. Paris to Beijing by bike: they made it!

    CERN Multimedia

    2008-01-01

    The challenge, a 12,623 km cycle trip to Beijing for the inauguration of the Olympic Games, was no easy ride, but they made it there on time. "I can do nothing for those who do not ask themselves questions" (Confucius -551-479 BC) CERN’s Raymond Cambarrat and Peter Dreesen arrived in the Chinese capital on 3 August after an incredible human and sporting adventure that began in Paris on 16 March (see Bulletin No. 20 & 21, 8 May 2008). The two cyclists, who set off on their journey with 102 other enthusiasts, rode for a total of 120 days with only ten days’ rest along the way. The greatest distance they covered in a single day was a 192 km leg in Russia, one of 12 countries their expedition took them through. From the arid steppes of Kirghizstan through the fog of Mount Hua to the snowy wind-swept pass of Kampa, the group covered roads of varying quality, some of them untarmacked, notchi...

  20. Indoor tetrachloroethylene levels and determinants in Paris dwellings.

    Science.gov (United States)

    Roda, Célina; Kousignian, Isabelle; Ramond, Anna; Momas, Isabelle

    2013-01-01

    There is growing public health concern about indoor air quality. Tetrachloroethylene (PERC), a chlorinated volatile organic compound widely used as a solvent in dry cleaning facilities, can be a residential indoor air pollutant. As part of an environmental investigation included in the PARIS (Pollution and asthma Risk: an Infant Study) birth cohort, this study firstly aimed to document domestic PERC levels, and then to identify the factors influencing these levels using standardized questionnaires about housing characteristics and living conditions. Air samples were collected in the child's bedroom over one week using passive devices when infants were 1, 6, 9, and 12 months. PERC was identified and quantified by gas chromatography/mass spectrometry. PERC annual domestic level was calculated by averaging seasonal levels. PERC was omnipresent indoors, annual levels ranged from 0.6 to 124.2 μg/m3. Multivariate linear and logistic regression models showed that proximity to dry cleaning facilities, do-it-yourself activities (e.g.: photographic development, silverware), presence of air vents, and building construction date (<1945) were responsible for higher domestic levels of PERC. This study, conducted in an urban context, provides helpful information on PERC contamination in dwellings, and identifies parameters influencing this contamination. Copyright © 2012 Elsevier Inc. All rights reserved.

  1. Winter air pollution and infant bronchiolitis in Paris.

    Science.gov (United States)

    Ségala, Claire; Poizeau, David; Mesbah, Mounir; Willems, Sylvie; Maidenberg, Manuel

    2008-01-01

    Respiratory syncytial virus (RSV) is one of the most common respiratory pathogens in infants and young children. It is not known why some previously healthy infants, when in contact with RSV, develop bronchiolitis whereas others have only mild symptoms. Our study aimed to evaluate the possible association between emergency hospital visits for bronchiolitis and air pollution in the Paris region during four winter seasons. We included children under the age of 3 years who attended emergency room services for bronchiolitis (following standardized definition) during the period 1997-2001. Two series of data from 34 hospitals, the daily number of emergency hospital consultations (n=50857) and the daily number of hospitalizations (n=16588) for bronchiolitis, were analyzed using alternative statistical methods; these were the generalized additive model (GAM) and case-crossover models. After adjustments for public holidays, holidays and meteorological variables the case-crossover model showed that PM10, BS, SO2 and NO2 were positively associated with both consultations and hospitalizations. GAM models, adjusting for long-term trend, seasonality, holiday, public holiday, weekday and meteorological variables, gave similar results for SO2 and PM10. This study shows that air pollution may act as a trigger for the occurrence of acute severe bronchiolitis cases.

  2. Paris Photo 2015 / Kristel Schwede, Annika Haas, Laura Põld, Piret Frey

    Index Scriptorium Estoniae

    2015-01-01

    Rahvusvaheline fotomess "Paris Photo 2015" 12. kuni 15. novembrini Pariisi messihallis Grand Palais. Eestit esindasid messil oma loominguga Jaanus Samma, Sigrid Viir, Krista Mölder (Temnikova & Kasela galerii)

  3. Treatment of unicameral bone cysts by curettage and packing with plaster-of-Paris pellets. 1978.

    Science.gov (United States)

    Peltier, Leonard F; Jones, Richard H

    2004-05-01

    Long-term follow-up of twenty-six patients with unicameral bone cysts treated by curettage and packing with plaster-of-Paris pellets showed a recurrence in only two cases and no serious complications.

  4. Paris Chamber of Commerce Examinations and ACTFL/ETS Proficiency Levels.

    Science.gov (United States)

    Cummins, Patricia W.

    1987-01-01

    Compares the Paris Chamber of Commerce Exams (both certificate and diploma levels) and the ACTFL Guidelines for language proficiency for the benefit of language teachers. Teaching strategies are suggested for preparing students for the Chamber of Commerce exams. (LMO)

  5. Metal loading in Soda Butte Creek upstream of Yellowstone National Park, Montana and Wyoming; a retrospective analysis of previous research; and quantification of metal loading, August 1999

    Science.gov (United States)

    Boughton, G.K.

    2001-01-01

    Acid drainage from historic mining activities has affected the water quality and aquatic biota of Soda Butte Creek upstream of Yellowstone National Park. Numerous investigations focusing on metals contamination have been conducted in the Soda Butte Creek basin, but interpretations of how metals contamination is currently impacting Soda Butte Creek differ greatly. A retrospective analysis of previous research on metal loading in Soda Butte Creek was completed to provide summaries of studies pertinent to metal loading in Soda Butte Creek and to identify data gaps warranting further investigation. Identification and quantification of the sources of metal loading to Soda Butte Creek was recognized as a significant data gap. The McLaren Mine tailings impoundment and mill site has long been identified as a source of metals but its contribution relative to the total metal load entering Yellowstone National Park was unknown. A tracer-injection and synoptic-sampling study was designed to determine metal loads upstream of Yellowstone National Park.A tracer-injection and synoptic-sampling study was conducted on an 8,511-meter reach of Soda Butte Creek from upstream of the McLaren Mine tailings impoundment and mill site downstream to the Yellowstone National Park boundary in August 1999. Synoptic-sampling sites were selected to divide the creek into discrete segments. A lithium bromide tracer was injected continuously into Soda Butte Creek for 24.5 hours. Downstream dilution of the tracer and current-meter measurements were used to calculate the stream discharge. Stream discharge values, combined with constituent concentrations obtained by synoptic sampling, were used to quantify constituent loading in each segment of Soda Butte Creek.Loads were calculated for dissolved calcium, silica, and sulfate, as well as for dissolved and total-recoverable iron, aluminum, and manganese. Loads were not calculated for cadmium, copper, lead, and zinc because these elements were infrequently

  6. U.S. withdrawal from the Paris Agreement: Reasons, impacts, and China's response

    OpenAIRE

    Hai-Bin Zhang; Han-Cheng Dai; Hua-Xia Lai; Wen-Tao Wang

    2017-01-01

    Applying qualitative and quantitative methods, this article explains the driving forces behind U.S. President Donald Trump's decision to withdraw from the Paris Agreement, assesses the impacts of this withdrawal on the compliance prospects of the agreement, and proposes how China should respond. The withdrawal undercuts the foundation of global climate governance and upsets the process of climate cooperation, and the impacts are manifold. The withdrawal undermines the universality of the Pari...

  7. Short term respiratory health effects of ambient air pollution: results of the APHEA project in Paris.

    OpenAIRE

    Dab, W; Medina, S; Quénel, P; Le Moullec, Y; Le Tertre, A; Thelot, B; Monteil, C; Lameloise, P; Pirard, P; Momas, I; Ferry, R; Festy, B

    1996-01-01

    STUDY OBJECTIVE: To quantify the short term respiratory health effects of ambient air pollution in the Paris area. DESIGN: Time series analysis of daily pollution levels using Poisson regression. SETTING: Paris, 1987-92. MEASUREMENTS AND MAIN RESULTS: Air pollution was monitored by measurement of black smoke (BS) (15 monitoring stations), sulphur dioxide (SO2), nitrogen dioxide (NO2), particulate matter less than 13 microns in diameter (PM13), and ozone (O3) (4 stations). Daily mortality and ...

  8. High-quality MOVPE butt-joint integration of InP/AlGaInAs/InGaAsP-based all-active optical components

    DEFF Research Database (Denmark)

    Kulkova, Irina; Kadkhodazadeh, Shima; Kuznetsova, Nadezda

    2014-01-01

    In this paper, we demonstrate the applicability of MOVPE butt-joint regrowth for integration of all-active InP/AlGaAs/InGaAsP optical components and the realization of high-functionality compact photonic devices. Planar high-quality integration of semiconductor optical amplifiers of various epi...

  9. Wintercuring of Prunus dulcis cv ‘Butte,’ P. webbii and their interspecific hybrid in response to Xylella fastidiosa infections

    Science.gov (United States)

    Clonal replicates of Prunus dulcis cv ‘Butte,’ P. webbii and their interspecific hybrid P 63-61 were inoculated with Xylella fastidiosa strain M23 and evaluated for Almond Leaf Scorch Disease and subsequent wintercuring of infections during three growing seasons. Initial inoculations established gr...

  10. Recreational Use and Value of Water at Elephant Butte and Navajo Reservoirs. New Mexico State University Agricultural Experiment Station Bulletin 535.

    Science.gov (United States)

    Coppedge, Robert O.; Gray, James R.

    This document is a descriptive study of the recreational use and the value of water at Elephant Butte and Navajo Reservoirs. Previous research studies, as well as the study areas and recreational characteristics and procedures of investigation used in this study (sampling and data collection, data organization, analysis) are described. Discussions…

  11. Assessment of undiscovered oil and gas resources in the Uteland Butte Member of the Eocene Green River Formation, Uinta Basin, Utah

    Science.gov (United States)

    Johnson, Ronald C.; Birdwell, Justin E.; Mercier, Tracey J.; Brownfield, Michael E.; Charpentier, Ronald R.; Klett, Timothy R.; Leathers, Heidi M.; Schenk, Christopher J.; Tennyson, Marilyn E.

    2015-09-03

    Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean undiscovered resources of 214 million barrels of oil, 329 billion cubic feet of associated/dissolved natural gas, and 14 million barrels of natural gas liquids in the informal Uteland Butte member of the Green River Formation, Uinta Basin, Utah.

  12. Pursuing the Emancipatory Purport of Subjectivity from Frankfurt to Paris

    Directory of Open Access Journals (Sweden)

    H. Mesbahian

    2010-01-01

    Full Text Available This paper is devoted to investigating the philosophical place of Subjectivity in the contemporary thought. My justification for engaging in further study on this much-discussed concept is that three significant questions concerning subjectivity have remained insufficiently examined: What is the problem of philosophical foundation of modernity from Cartesian Cogito to the Kantian autonomous will and to the Hegelian subjectivity? Is there any possibility to overcome the proposed problem from an internal point of view and from the perspective of Jürgen Habermas? Whether the radical criticism of the Enlightenment idea of an autonomous subject by thinkers like Foucault and Derrida leads to loss of freedom or to the robust notion of freedom being deeply improved? This paper, accordingly, will examine the three above mentioned questions regarding subjectivity across three sections. I have argued, in the first section that the Enlightenment’s her¬itage is contradictory. On the one hand, the notion of subjectivity has generated a kind of emancipation. On the other hand, the subjectivity has enthroned a conception of reason and of method that can be interpreted as a new form of domination. In the second section, I have argued that Habermas’s answer to the philosophical dilemma of subjectivity is to accept the criticism of subject-centered reason but to find a basis for reason in communicative action. Habermas’s conception of subjectivity has been criticized by the help of some contemporary thinkers, in the third section of this paper, and it has been argued that based on his notions of modernity and subjectivity the marginalized populations of the World- namely the Other- can no longer expect intellectual and ethical support for their plight from Frankfurt and should immigrate to Paris in order to purse the emancipatory aspect of subjectivity.

  13. Composite Sunrise Butte pluton: Insights into Jurassic–Cretaceous collisional tectonics and magmatism in the Blue Mountains Province, northeastern Oregon

    Science.gov (United States)

    Johnson, Kenneth H.; Schwartz, J.J.; Žák, Jiří; Verner, Krystof; Barnes, Calvin G.; Walton, Clay; Wooden, Joseph L.; Wright, James E.; Kistler, Ronald W.

    2015-01-01

    The composite Sunrise Butte pluton, in the central part of the Blue Mountains Province, northeastern Oregon, preserves a record of subduction-related magmatism, arc-arc collision, crustal thickening, and deep-crustal anatexis. The earliest phase of the pluton (Desolation Creek unit) was generated in a subduction zone environment, as the oceanic lithosphere between the Wallowa and Olds Ferry island arcs was consumed. Zircons from this unit yielded a 206Pb/238U age of 160.2 ± 2.1 Ma. A magmatic lull ensued during arc-arc collision, after which partial melting at the base of the thickened Wallowa arc crust produced siliceous magma that was emplaced into metasedimentary rocks and serpentinite of the overthrust forearc complex. This magma crystallized to form the bulk of the Sunrise Butte composite pluton (the Sunrise Butte unit; 145.8 ± 2.2 Ma). The heat necessary for crustal anatexis was supplied by coeval mantle-derived magma (the Onion Gulch unit; 147.9 ± 1.8 Ma).The lull in magmatic activity between 160 and 148 Ma encompasses the timing of arc-arc collision (159–154 Ma), and it is similar to those lulls observed in adjacent areas of the Blue Mountains Province related to the same shortening event. Previous researchers have proposed a tectonic link between the Blue Mountains Province and the Klamath Mountains and northern Sierra Nevada Provinces farther to the south; however, timing of Late Jurassic deformation in the Blue Mountains Province predates the timing of the so-called Nevadan orogeny in the Klamath Mountains. In both the Blue Mountains Province and Klamath Mountains, the onset of deep-crustal partial melting initiated at ca. 148 Ma, suggesting a possible geodynamic link. One possibility is that the Late Jurassic shortening event recorded in the Blue Mountains Province may be a northerly extension of the Nevadan orogeny. Differences in the timing of these events in the Blue Mountains Province and the Klamath–Sierra Nevada Provinces suggest that

  14. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    International Nuclear Information System (INIS)

    Steinberg, Spencer M.; Buck, Brenda; Morton, Janice; Dorman, James

    2008-01-01

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as 129 I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I - , IO 3 - and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples

  15. The speciation of iodine in the salt impacted Black Butte soil series along the Virgin river, Nevada, USA

    Energy Technology Data Exchange (ETDEWEB)

    Steinberg, Spencer M. [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)], E-mail: spencer.steinberg@unlv.edu; Buck, Brenda; Morton, Janice [Department of Geoscience, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States); Dorman, James [Department of Chemistry, University of Nevada Las Vegas, Las Vegas, NV 80154 (United States)

    2008-12-15

    Salt-impacted soils occur in floodplains, wetlands and backswamps in arid climates. These soils become sinks or temporary storage sites for soluble salts and contaminants including agricultural chemicals, industrial pollutants and radionuclides such as {sup 129}I. The vertical distribution of I in the Black Butte soil series along the Virgin river was assessed and the distribution of I between I{sup -}, IO{sub 3}{sup -} and organically bound I was determined. The speciation of I was compared to the organic C content, specific components of the organic C, and clay content. This study indicates that organic I was the most abundant form of I in these soil samples and that the content of organic I generally correlated to total organic matter and lignin (as measured by chemolysis) of the samples.

  16. Influence of the phase morphology on the weldability of PLA/PBAT-blends by using butt-welding

    Science.gov (United States)

    Goebel, L.; Bonten, C.

    2014-05-01

    The material development in the field of bioplastics is steadily increasing. It is important to examine the processability but the Investigation of further process steps is also very important. In this paper the weldability of bioplastics is discussed. Compounds of Polylactide (PLA) and Polybutyleneadipate-terephthalate (PBAT) are produced by a twin screw extruder with different mixing ratios. Tensile specimens are produced by injection moulding and the tensile tests are carried out. In order to verify the weldability, some tensile specimens are cut in halfes and butt welded. Afterwards a tensile test is performed with the welded samples and the results are compared with the values of the unwelded samples. For understanding the results, the morphology of the welds were examined and correlated. It has been found that blends with a mixing ratio of 50:50 have the lowest welding factor, because of the immiscibility of PLA and PBAT. Weld images show segregated areas that reduce the force transmission.

  17. Numerical Simulation of Heat and Flow Behaviors in Butt-fusion Welding Process of HDPE Pipes with Curved Fusion Surface

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jae Hyun; Ahn, Kyung Hyun [Seoul National University, Seoul (Korea, Republic of); Choi, Sunwoong; Oh, Ju Seok [Hannam University, Daejeon (Korea, Republic of)

    2017-08-15

    Butt-fusion welding process is used to join the polymeric pipes. Recently, some researchers suggest the curved surface to enhance a welding quality. We investigated how curved welding surface affects heat and flow behaviors of polymer melt during the process in 2D axisymmetric domain with finite element method, and discussed the effect to the welding quality. In this study, we considered HDPE pipes. In heat soak stage, curved phase interface between the melt and solid is shown along the shape of welding surface. In jointing stage, squeezing flow is generated between curved welding surface and phase interface. The low shear rate in fusion domain reduces the alignment of polymer to the perpendicular direction of pipes, and then this phenomenon is expected to help to enhance the welding quality.

  18. The coal deposits of the Alkali Butte, the Big Sand Draw, and the Beaver Creek fields, Fremont County, Wyoming

    Science.gov (United States)

    Thompson, Raymond M.; White, Vincent L.

    1952-01-01

    Large coal reserves are present in three areas located between 12 and 20 miles southeast of Riverton, Fremont County, central Wyoming. Coal in two of these areas, the Alkali Butte coal field and the Big Sand Draw coal field, is exposed on the surface and has been developed to some extent by underground mining. The Beaver Creek coal field is known only from drill cuttings and cores from wells drilled for oil and gas in the Beaver Creek oil and gas field.These three coal areas can be reached most readily from Riverton, Wyo. State Route 320 crosses Wind River about 1 mile south of Riverton. A few hundred yards south of the river a graveled road branches off the highway and extends south across the Popo Agie River toward Sand Draw oil and gas field. About 8 miles south of the highway along the Sand Draw road, a dirt road bears east and along this road it is about 12 miles to the Bell coal mine in the Alkali Butte coal field. Three miles southeast of the Alkali Butte turn-off, 3 miles of oiled road extends southwest into the Beaver Creek oil and gas field. About 6 miles southeast of the Beaver Creek turn-off, in the valley of Little Sand Draw Creek, a dirt road extends east 1. mile and then southeast 1 mile to the Downey mine in the Big Sand Draw coal field. Location of these coal fields is shown on figure 1 with their relationship to the Wind River basin and other coal fields, place localities, and wells mentioned in this report. The coal in the Alkali Butte coal field is exposed partly on the Wind River Indian Reservation in Tps. 1 and 2 S., R. 6 E., and partly on public land. Coal in the Beaver Creek and Big Sand Draw coal fields is mainly on public land. The region has a semiarid climate with rainfall averaging less than 10 in. per year. When rain does fall the sandy-bottomed stream channels fill rapidly and are frequently impassable for a few hours. Beaver Creek, Big Sand Draw, Little Sand Draw, and Kirby Draw and their smaller tributaries drain the area and flow

  19. Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels

    International Nuclear Information System (INIS)

    Moraitis, G.A.; Labeas, G.N.

    2009-01-01

    A two-level three-dimensional Finite Element (FE) model has been developed to predict keyhole formation and thermo-mechanical response during Laser Beam Welding (LBW) of steel and aluminium pressure vessel or pipe butt-joints. A very detailed and localized (level-1) non-linear three-dimensional transient thermal model is initially developed, which simulates the mechanisms of keyhole formation, calculates the temperature distribution in the local weld area and predicts the keyhole size and shape. Subsequently, using a laser beam heat source model based on keyhole assumptions, a global (level-2) thermo-mechanical analysis of the LBW butt-joint is performed, from which the joint residual stresses and distortions are calculated. All the major physical phenomena associated to LBW, such as laser heat input via radiation, heat losses through convection and radiation, as well as latent heat are accounted for in the numerical model. Material properties and particularly enthalpy, which is very important due to significant material phase changes, are introduced as temperature-dependent functions. The main advantages of the developed model are its efficiency, flexibility and applicability to a wide range of LBW problems (e.g. welding for pressure vessel or pipework construction, welding of automotive, marine or aircraft components, etc). The model efficiency arises from the two-scale approach applied. Minimal or no experimental data are required for the keyhole size and shape computation by the level-1 model, while the thermo-mechanical response calculation by the level-2 model requires only process and material data. Therefore, it becomes possible to efficiently apply the developed simulation model to different material types and varying welding parameters (i.e. welding speed, heat source power, joint geometry, etc.) in order to control residual stresses and distortions within the welded structure

  20. The Path Forward from Paris: the Challenge for Tropical Countries

    Science.gov (United States)

    Nobre, C.

    2016-12-01

    The pledges of emissions reductions put forth at the COP21 in Paris fall short of ensuring the desired guardrail of 2 C warming, let alone the more stringent, but necessary, goal of 1.5 C warming if we want to minimize the increasing risks of climate change over both the short term of decades and the long term of centuries. Decarbonization of the global economy is mandatory, which implies a gargantuan challenge of decarbonizing the energy system. Given the likelihood of decreasing strength of the natural sinks in the global oceans and land biota as warming progresses, it may be necessary to reach nearly zero net emissions by midcentury and even negative net emissions by the end of the century. In addition to massive and rapid implementation of renewable energy systems, desirable mitigation trajectories involve large-scale reforestation and ecosystem restoration and also bioenergy capture and storage systems (BECCS). Tropical countries can play an important role to meet both goals as long as they are able to implement sustainable agriculture at the large scale that is nearly carbon-neutral and resilient to unavoidable climate change. And reaching sustainability in the agricultural sector—remembering that agricultural direct emissions and indirect emissions due to deforestation account for almost one quarter of global emissions—is under the constraint to meet food security for all, that is, food production has to grow 70% by midcentury, with concomitant reduction of waste in the food chain. I will take the example of mitigation options for Brazil—a large tropical country with per capita emissions of about 7.5 ton CO2-eq—to illustrate sustainable development trajectories of reaching carbon neutrality by midcentury. That will imply developing a modern, more productive carbon-neutral agriculture within the next two decades, reducing tropical deforestation to nearly zero within a decade, restoring ecosystems and increasing renewable energy use to over 80% of its

  1. Embedding the logic of the Paris Agreement into the new Regulation on Governance of the Energy Union

    International Nuclear Information System (INIS)

    Voss-Stemping, Judith; Sartor, Oliver; Colombier, Michel

    2017-10-01

    To safeguard the climate and to keep the temperatures targets of the Paris Agreement within reach, determined climate action of global players, such as the European Union (EU) and its Member States, is needed more than ever. The Paris Agreement sets out a clear process to review and raise ambition embarking on a long-term transformation of the global economy. To ensure that this process and the logic of the Paris Agreement is adequately embedded in the into the new Regulation on Governance of the Energy Union, IDDRI identifies the long-term strategies, iterative process and inherent time-line of the Paris Agreement as points of vigilance

  2. Polyp morphology: an interobserver evaluation for the Paris classification among international experts.

    Science.gov (United States)

    van Doorn, Sascha C; Hazewinkel, Y; East, James E; van Leerdam, Monique E; Rastogi, Amit; Pellisé, Maria; Sanduleanu-Dascalescu, Silvia; Bastiaansen, Barbara A J; Fockens, Paul; Dekker, Evelien

    2015-01-01

    The Paris classification is an international classification system for describing polyp morphology. Thus far, the validity and reproducibility of this classification have not been assessed. We aimed to determine the interobserver agreement for the Paris classification among seven Western expert endoscopists. A total of 85 short endoscopic video clips depicting polyps were created and assessed by seven expert endoscopists according to the Paris classification. After a digital training module, the same 85 polyps were assessed again. We calculated the interobserver agreement with a Fleiss kappa and as the proportion of pairwise agreement. The interobserver agreement of the Paris classification among seven experts was moderate with a Fleiss kappa of 0.42 and a mean pairwise agreement of 67%. The proportion of lesions assessed as "flat" by the experts ranged between 13 and 40% (Pagreement did not change (kappa 0.38, pairwise agreement 60%). Our study is the first to validate the Paris classification for polyp morphology. We demonstrated only a moderate interobserver agreement among international Western experts for this classification system. Our data suggest that, in its current version, the use of this classification system in daily practice is questionable and it is unsuitable for comparative endoscopic research. We therefore suggest introduction of a simplification of the classification system.

  3. The Paris Agreement: end of the climate multilateralism crisis or evolution in chiaroscuro?

    International Nuclear Information System (INIS)

    Lavallee, Sophie; Maljean-Dubois, Sandrine

    2016-01-01

    After a decade of chaotic negotiations, the twenty-first Conference of Parties to the United Nations Framework Convention on Climate Change managed on 12 December 12 2015 to agree on the text of an international treaty, the Paris Agreement, preceded by a COP decision aiming both to explain and prepare the entry into force of the treaty. Is this compromise text marking a significant step or is it a weak agreement incapable to alter our medium and long term trajectories of emissions of greenhouse gases? Tracing the process that led to its adoption helps to better understand the substantive and procedural contribution of the Paris agreement, without denying its limits. As a new brick in the complex architecture of the climate regime, the Paris Agreement is more the beginning of a new era for climate diplomacy, full of uncertainties, than a final stage

  4. Assessment of the Climate Paris Agreement in the light of a Global Standard of Transparency

    International Nuclear Information System (INIS)

    Tabau, Anne-Sophie

    2016-01-01

    Reactions to the Paris Agreement oscillate between political enthusiasm, given the diplomatic challenge that was taken-up, and activist disappointment, considering the emergency and scale of transformations to undertake to tackle climate change. The legal analysis of the COP21, its results and prospects they open however needs to be done in the light of dispassionate criteria. The one proposed in this paper uses a global standard of transparency. The reading grid offered thus enables to locate the Paris Agreement in the context of a global and complex governance; two features that the theory of global administrative law aims to better understand, from an empirical but also a prescriptive approaches. This assessment shows that the balance between transparency and opacity, intelligibility, effectiveness or efficiency is both delicate to establish and unstable. If the way the cursor was positioned under the Paris Agreement may seem unsatisfactory in many respects, it must not be forgotten that it is intended to evolve

  5. Messier, Copernicus, Flamsteed: The SAF Rare-Book Collection in Paris

    Science.gov (United States)

    Pasachoff, Jay M.

    2014-01-01

    The historic books belonging to the Société Astronomique de France, founded by Camille Flammarion in 1887, are located partly in Paris and partly at the Flammarion site in Juvisy, a Paris suburb. Their holdings include first editions of Copernicus's De Revolutionibus and of Flamsteed's star atlas, as well as Messier's own copy of his 1783 and 1784 papers with his handwritten comments and additions. I will describe the fruitless search for a Bevis atlas and the circumstances that led me to inspect these treasures. I thank David Valls-Gabaud and Philippe Morel of the Société Astronomique de France for their hospitality in Paris, Jean-Claude Pecker, and Owen Gingerich for his prior work on Messier's catalogue.

  6. Climate champions? France, Germany and Europe in the negotiations about the Paris Agreement on climate

    International Nuclear Information System (INIS)

    Aykut, Stefan

    2016-05-01

    This report discusses the role and implications of France, Germany and Europe in the preparation of the Paris Agreement of December 2015. The author first discusses the historical aspiration of Europe to have a role of leadership in the negotiations. Then, he examines and comments the actual results of the COP21 and the content of the Paris Agreement. He analyses situational factors, the economic and political context, the role of the French diplomacy, of Germany and of the European Union. He analyses dynamics which, on the medium and the long terms, has shaped climate governance, notably the red lines defined by China and the USA, and the general framework of negotiations which tend to exclude some important issues which are considered as matters of conflict. The last part proposes a retrospective overview on room and options available for Europe to find a leadership again within the new climate regime implemented by the Paris Agreement

  7. Housing and the construction of the city: the Paris Habitat Experience

    Directory of Open Access Journals (Sweden)

    Javier Arpa

    2015-12-01

    Full Text Available In Paris, the history and the evolution of social housing provision merge with those of a centennial institution. Created in 1914, the Office Public d’Habitations à Bon Marché, currently called Paris Habitat, manages more than 1,200 operations, 120,000 housing units inhabited by 200,000 residents. This article reviews an investigation to this exceptional heritage commissioned by the Pavillon de l'Arsenal in Paris, which resulted in the exhibition and catalogue Paris Habitat: Cent ans de ville, cent ans de vie, presented by the institution in 2015.The investigation, exhibition and publication were organized around the analysis of ten fragments of reality that, rather than matching administrative divisions or urban planning projects, span municipalities, districts and infrastructures. From low-cost to large-scale housing, from concerns with hygiene to ecology issues, each one of the building ensembles analyzed bears witness to the will to change society through housing. Written by the project’s main curator and catalogue editor, this review details the process through which essential questions formulated early on – What is the city we want like? How is it built? – were answered to: selecting from the wealth of material produced by Paris Habitat over one hundred years of activity, the team exposed their political stance on urban strategies at large. Importantly, Paris Habitat’s ‘actions’ substantiated the team’s belief that our knowledge of this long, continuous urban experiment can contribute to improve the metropolises of today and strengthen its ability to answer contemporary concerns: the transformation of offices into housing, new residents’ participation formulas, new building and conception processes, which are key elements in the making of cities that need to be dense, diverse, intense, fertile and agile.

  8. Geç Ortaçağ Avrupası’nın Meşhur ve Gizemli Şehri Paris (Paris That Was Famous and Mysterious City of the Late Medieval Europe

    Directory of Open Access Journals (Sweden)

    Abdulhalik BAKIR

    2010-10-01

    Full Text Available Paris is one of the most important capitals of the middle age. Actually, this city is universecity. Namely, Paris was remembered as a univercity, education center and art and architecture center. Paris appeared differently from the other cities. Here was an important city that East culture and West culture mixed with each other. In its environment, there were cities that have a traditional structure. It carries all the facilities of the city structure in the later middle ages. Namely, Paris is remembered firstly, while city structure is described. Like Chretien de Troyes described, Paris had the culture that made France as the first heritage of Roma and Greek. Paris is a colourful city. Perhaps, France had the most crowd population because of these facilities of Paris. Generally, undoubtedly, these facilities had a big role about the development of France civilization in the 13th century. So, in this study, we will study to introduce Paris with social-economic and culturel angles and give its appearance in the later middle ages.

  9. Revision of the Paris Convention from the German point of view

    International Nuclear Information System (INIS)

    Mahlmann, Wilfried.

    1977-01-01

    The paper discusses the revision of the Paris Convention from the German point of view and states how this country has used the possibilities for exceptions provided under the Convention so that German nuclear third party liability legislation differs somewhat from the standards laid down in the Convention. This is explained by a desire to provide increased financial security for the population concerned. After describing various proposed procedures for increasing liability amounts in the Paris Convention and the Brussels Supplementary Convention the author concludes that his country would welcome a revision of the Conventions which would provide increased financial security for the public. (NEA) [fr

  10. [Jacques Clarion (1776-1844), professor of l'Ecole de pharmacie de Paris].

    Science.gov (United States)

    Trépardoux, Francis

    2006-11-01

    Engaged in military campaigns from 1793 to 1797, he then studied medicine in Paris, as well as pharmacy, specialised in chemistry and botany. Supported by Deyeux and Corvisart, he was nominated as pharmacist of the emperor. From 1819 to 1844, he taught botany at the School of pharmacy of Paris. In 1823, the authority gave him a second chair for the medical botany at the Faculty of medicine, but after the 1830 revolution, he was dismissed. He mainly worked in taxonomy, contributing to several publications with Palisot and de Candolle for Graminaceae. He was a member of the academy of medicine.

  11. Technical Letter Report - Preliminary Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion

    International Nuclear Information System (INIS)

    Crawford, Susan L.; Cumblidge, Stephen E.; Doctor, Steven R.; Hall, Thomas E.; Anderson, Michael T.

    2008-01-01

    The U.S. Nuclear Regulatory Commission (NRC) has a multi-year program at the Pacific Northwest National Laboratory (PNNL) to provide engineering studies and assessments of issues related to the use of nondestructive evaluation (NDE) methods for the reliable inspection of nuclear power plant components. As part of this program, there is a subtask 2D that was set up to address an assessment of issues related to the NDE of high density polyethylene (HDPE) butt fusion joints. This work is being driven by the nuclear industry wanting to employ HDPE materials in nuclear power plant systems. This being a new material for use in nuclear applications, there are a number of issues related to its use and potential problems that may evolve. The industry is pursuing ASME Code Case N-755 entitled 'Use of Polyethylene (PE) Plastic Pipe for Section III, Division 1, Construction and Section XI Repair/Replacement Activities' that contains the requirements for nuclear power plant applications of HDPE. This Code Case requires that inspections be performed after the fusion joint is made by visually examining the bead that is formed and conducting a pressure test of the joint. These tests are only effective in general if gross through-wall flaws exist in the fusion joint. The NRC wants to know whether a volumetric inspection can be conducted on the fusion joint that will reliably detect lack-of-fusion conditions that may be produced during joint fusing. The NRC has requested that the work that PNNL is conducting be provided to assist them in resolving this inspection issue of whether effective volumetric NDE can be conducted to detect lack of fusion (LOF) in the butt HDPE joints. PNNL had 24 HDPE pipe specimens manufactured of 3408 material to contain LOF conditions that could be used to assess the effectiveness of NDE in detecting the LOF. Basic ultrasonic material properties were measured and used to guide the use of phased arrays and time-of-flight diffraction (TOFD) work that was

  12. Thermo-mechanical FE-analysis of butt-welding of a Cu-Fe canister for spent nuclear fuel

    International Nuclear Information System (INIS)

    Josefson, B.L.; Karlsson, L.; Lindgren, L.E.; Jonsson, M.

    1992-10-01

    In the Swedish nuclear waste program it has been proposed that spent nuclear fuel shall be placed in composite copper-steel canisters. These canisters will be placed in holes in tunnels located some 500 m underground in a rock storage. The canisters consists of two cylinders of 4850 mm length, one inner cylinder made of steel and one outer cylinder made of copper. The outer diameter of the canister is 880 mm and the wall thickness for each cylinder is 50 mm. At the storage, the steel cylinder, which contains the spent nuclear fuel, is placed inside the copper cylinder. Thereafter, a copper end is butt welded to the copper cylinder using electron beam welding. To obtain penetration through the thickness with this weld method a backing ring is placed at the inside of the copper cylinder. In the present paper, the temperature, strain and stress fields present during welding and after cooling after welding are calculated numerically using the FE-code NIKE-2D. The aim is to use the results of the present calculations to estimate the risk for creep fracture during the subsequent design life. A large strain formulation is employed for the calculation of transient and residual stresses in the canister based on the calculated history of the temperature field present in the canister during the welding process. The contact algorithm available in NIKE-2D is used to detect possible contact between the steel and copper cylinders during the welding. To simplify the numerical calculations and reduce the computational time, rotational symmetry is assumed. For large gap distances between the steel and copper cylinders the residual stress field is calculated to have a shape similar to that observed in butt welded pipes with maximum axial stress values at the yield stress level. For small gap distances the backing ring will come in contact with the steel cylinder which leads to large residual stresses in the backing ring. The maximum accumulated plastic strain in the weld metal and

  13. Feasibility evaluations for the integration of laser butt welding of tubes in industrial pipe coil production lines

    Science.gov (United States)

    Penasa, Mauro; Colombo, Enrico; Giolfo, Mauro

    1994-09-01

    Due to the good performance shown by laser welded joints, to the quality and repeatability achievable by this welding technique and to its high process productivity, a feature inherent to the laser technology which, together with its high flexibility, allows different operations to be performed by a single source, consistent savings in a production line may be obtained. Therefore laser welding techniques may be of high relevance for industrial applications, provided that a sufficient attention is paid to avoiding a low utilization time to the operating laser source. The paper describes a feasibility study for the integration of a laser source as an automatic unit for circumferential butt welding of tubes in production lines of pipe coils, just before the cold bending station. Using a 6 kW CO2 source, thickness ranging from 3.5 to 11.2 mm in carbon, low alloyed Cr-Mo and austenitic stainless steels, have been successfully welded. Cr-Mo steels require on line preheating treatment, which however can be achieved by laser defocused passes just before welding. The results of the preliminary qualification performed on laser welded joints of the involved topologies of product (materials, diameters and thicknesses) are described together with technological tests required for approval: laser circumferential butt welding of tubes has proven to be effective, with satisfactory and repeatable results and good joint performances. An exhaustive comparison with current welding techniques (TIG, MIG) is then carried out, along with a detailed analysis of the potential advantages and benefits which may be expected by using the laser welding technique, as well as with a first estimation of the investments and running costs. Since laser productivity is saturated only at a rough 35% during the year, an accurate analysis of other possible applications and of a possible lay out of a laser working cell integrated in the factory production lines is performed. Usually little attention is

  14. Assessment of NDE Methods on Inspection of HDPE Butt Fusion Piping Joints for Lack of Fusion with Validation from Mechanical Testing

    International Nuclear Information System (INIS)

    Anderson, Michael T.; Cinson, Anthony D.; Crawford, Susan L.; Doctor, Steven R.; Moran, Traci L.; Watts, Michael W.

    2010-01-01

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high-density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the U.S. Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high-speed tensile impact test and the side-bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12-in. IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack-of-fusion conditions. Six of these butt joints were volumetrically examined with time-of-flight diffraction (TOFD), phased-array (PA) ultrasound, and the Evisive microwave system. The outer-diameter weld beads were removed for the microwave inspection. In two of the four pipes, both the outer and inner weld beads were removed and the pipe joints re-evaluated. The pipes were sectioned and the joints destructively evaluated with the side-bend test by cutting portions of the fusion joint into slices that were planed and bent. The last step in this limited study will be to correlate the fusion parameters, nondestructive, and destructive evaluation results to validate the effectiveness of what each NDE technology detects and what each does not detect. The results of the correlation will be used in identifying any future work that is needed.

  15. The study on defects in aluminum 2219-T6 thick butt friction stir welds with the application of multiple non-destructive testing methods

    International Nuclear Information System (INIS)

    Li, Bo; Shen, Yifu; Hu, Weiye

    2011-01-01

    Research highlights: → Friction stir weld-defect forming mechanisms of thick butt-joints. → Relationship between weld-defects and friction stir welding process parameters. → Multiple non-destructive testing methods applied to friction stir welds. → Empirical criterion basing on mass-conservation for inner material-loss defects. → Nonlinear correlation between weld strengths and root-flaw lengths. -- Abstract: The present study focused on the relationship between primary friction stir welding process parameters and varied types of weld-defect discovered in aluminum 2219-T6 friction stir butt-welds of thick plates, meanwhile, the weld-defect forming mechanisms were investigated. Besides a series of optical metallographic examinations for friction stir butt welds, multiple non-destructive testing methods including X-ray detection, ultrasonic C-scan testing, ultrasonic phased array inspection and fluorescent penetrating fluid inspection were successfully used aiming to examine the shapes and existence locations of different weld-defects. In addition, precipitated Al 2 Cu phase coarsening particles were found around a 'kissing-bond' defect within the weld stirred nugget zone by means of scanning electron microscope and energy dispersive X-ray analysis. On the basis of volume conservation law in material plastic deformation, a simple empirical criterion for estimating the existence of inner material-loss defects was proposed. Defect-free butt joints were obtained after process optimization of friction stir welding for aluminum 2219-T6 plates in 17-20 mm thickness. Process experiments proved that besides of tool rotation speed and travel speed, more other appropriate process parameter variables played important roles at the formation of high-quality friction stir welds, such as tool-shoulder target depth, spindle tilt angle, and fixture clamping conditions on the work-pieces. Furthermore, the nonlinear correlation between weld tensile strengths and weld crack

  16. Strontium 90 activity in drinking water of Paris area from 1963 to 1972

    International Nuclear Information System (INIS)

    Jeanmaire, L.; Patti, F.; Gros, R.

    1976-01-01

    Strontium 90 was determined in drinking water of the Southern Paris area from 1963 to 1972. Activities usually below 1pCi/l were related to the Seine river flow and decreased with a half-life of about five years [fr

  17. Analyzing power in pp scattering at low energies: the Paris potential predictions

    International Nuclear Information System (INIS)

    Cote, J.; Pires, P.; Tourreil, R. de; Lacombe, M.; Loiseau, B.; Vinh Mau, R.

    1979-12-01

    Predictions of the Paris potential for the analyzing power in pp scattering at low energies are compared with recent high precision measurements at 6.14MeV and earlier measurements at 10 and 16MeV. Phase shift values are also presented and discussed in view of previous analyses

  18. Merchants of Light: The Paris Library School, Internationalism, and the Globalization of a Profession

    Science.gov (United States)

    Witt, Steven

    2013-01-01

    Amid growing isolationism after World War I, the American Library Association transferred its wartime programs to train librarians in Europe and promote the American model of public libraries. Working in collaboration with American philanthropists and members of the French library community, ALA established a permanent library school in Paris that…

  19. China's response to climate change issues after Paris Climate Change Conference

    Institute of Scientific and Technical Information of China (English)

    GAO Yun

    2016-01-01

    The Paris Climate Change Conference was successfully concluded with the Paris Agreement, which is a milestone for the world in collectively combating climate change. By participating in IPCC assessments and conducting national climate change assessments, China has been increasing its understanding of the issue. For the first time, China's top leader attended the Conference of the Parties, which indicates the acknowledgement of the rationality and necessity of climate change response by China at different levels. Moreover, this participation reflects China's commitment to including climate change in its ecology improvement program and pursuing a low-carbon society and economy. In order to ensure the success of the Paris Conference, China has contributed significantly. China's constructive participation in global governance shows that China is a responsible power. These principles such as the creation of a future of winewin cooperation with each country contributing to the best of its ability;a future of the rule of law, fairness, and justice;and a future of inclusiveness, mutual learning, and common development will serve as China's guidelines in its efforts to facilitate the implementation of the Paris Agreement and participate in the design of international systems.

  20. Is Marc-Antoine Jullien De Paris the "Father" of Comparative Education?

    Science.gov (United States)

    Epstein, Erwin H.

    2017-01-01

    More than any other historical figure, Marc-Antoine Jullien of Paris has been considered the "Father" of Comparative Education, and his "Esquisse d'un ouvrage sur l'éducation compare", appearing in 1816-17, has been viewed as that field's originating source. Yet, the view that Jullien is the first in his field, and that his…

  1. Paris Agreement climate proposals need a boost to keep warming well below 2 °c

    NARCIS (Netherlands)

    Rogelj, Joeri; Elzen, Den Michel; Höhne, Niklas; Fransen, Taryn; Fekete, Hanna; Winkler, Harald; Schaeffer, Roberto; Sha, Fu; Riahi, Keywan; Meinshausen, Malte

    2016-01-01

    The Paris climate agreement aims at holding global warming to well below 2 degrees Celsius and to "pursue efforts" to limit it to 1.5 degrees Celsius. To accomplish this, countries have submitted Intended Nationally Determined Contributions (INDCs) outlining their post-2020 climate action. Here

  2. The Paris Agreement: resolving the inconsistency between global goals and national contributions

    NARCIS (Netherlands)

    Höhne, Niklas; Kuramochi, Takeshi; Warnecke, Carsten; Röser, Frauke; Fekete, Hanna; Hagemann, Markus; Day, Thomas; Tewari, Ritika; Kurdziel, Marie; Sterl, Sebastian; Gonzales, Sofia

    2017-01-01

    The adoption of the Paris Agreement in December 2015 moved the world a step closer to avoiding dangerous climate change. The aggregated individual intended nationally determined contributions (INDCs) are not yet sufficient to be consistent with the long-term goals of the agreement of ‘holding the

  3. Exploring fair and ambitious mitigation contributions under the Paris Agreement goals

    NARCIS (Netherlands)

    Pan, Xunzhang; Elzen, den Michel; Höhne, Niklas; Teng, Fei; Wang, Lining

    2017-01-01

    In order to achieve the Paris Agreement goals of keeping the temperature rise well below 2 °C or even 1.5 °C, all countries would need to make fair and ambitious contributions to reducing emissions. A vast majority of countries have adopted reduction targets by 2030 in their Nationally Determined

  4. Entry into force and then? The Paris agreement and state accountability

    NARCIS (Netherlands)

    Karlsson-Vinkhuyzen, Sylvia I.; Groff, Maja; Tamás, Peter A.; Dahl, Arthur L.; Harder, Marie K.; Hassall, Graham

    2018-01-01

    The entry into force of the Paris Agreement on climate change brings expectations that states will be held to account for their commitments. The article elaborates on why this is not a realistic assumption unless a broader multilevel perspective is taken on the nature of accountability regimes for

  5. Contribution of the G20 economies to the global impact of the Paris agreement climate proposals

    NARCIS (Netherlands)

    den Elzen, Michel; Admiraal, Annemiek; Roelfsema, Mark; van Soest, Heleen; Hof, Andries F.; Forsell, Nicklas

    2016-01-01

    By 15 December 2015, 187 countries had submitted their Intended Nationally Determined Contributions (INDCs) summarising their climate actions after 2020 in the context of the Paris Agreement. We used a unified framework to assess the mitigation components of INDCs covering 105 countries

  6. The Paris Agreement : resolving the inconsistency between global goals and national contributions

    NARCIS (Netherlands)

    Höhne, Niklas; Kuramochi, Takeshi|info:eu-repo/dai/nl/304838683; Warnecke, Carsten; Röser, Frauke; Fekete, Hanna; Hagemann, Markus|info:eu-repo/dai/nl/374023557; Day, Thomas; Tewari, Ritika; Kurdziel, Marie; Sterl, Sebastian; Gonzales, Sofia

    2017-01-01

    The adoption of the Paris Agreement in December 2015 moved the world a step closer to avoiding dangerous climate change. The aggregated individual intended nationally determined contributions (INDCs) are not yet sufficient to be consistent with the long-term goals of the agreement of ‘holding the

  7. Rebound policy in the Paris Agreement: instrument comparison and climate-club revenue offsets

    NARCIS (Netherlands)

    van den Bergh, J.C.J.M.

    2017-01-01

    Rebound is given scant attention in both IPCC documents and UNFCCC climate summits, where climate agreements are negotiated. This article argues that without an international climate treaty, or with a soft treaty in the form of voluntary pledges, as characterizes the recent Paris climate agreement,

  8. Complete genome sequence of Paris mosaic necrosis virus, a distinct member of the genus Potyvirus

    Science.gov (United States)

    The complete genomic sequence of a novel potyvirus was determined from Paris polyphylla var. yunnanensis. Its genomic RNA consists of 9,660 nucleotides (nt) excluding the 3’-terminal poly (A) tail, containing a single open reading frame (ORF) encoding a large polyprotein. The virus shares 52.1-69.7%...

  9. China's response to climate change issues after Paris Climate Change Conference

    Directory of Open Access Journals (Sweden)

    Yun Gao

    2016-12-01

    Full Text Available The Paris Climate Change Conference was successfully concluded with the Paris Agreement, which is a milestone for the world in collectively combating climate change. By participating in IPCC assessments and conducting national climate change assessments, China has been increasing its understanding of the issue. For the first time, China's top leader attended the Conference of the Parties, which indicates the acknowledgement of the rationality and necessity of climate change response by China at different levels. Moreover, this participation reflects China's commitment to including climate change in its ecology improvement program and pursuing a low-carbon society and economy. In order to ensure the success of the Paris Conference, China has contributed significantly. China's constructive participation in global governance shows that China is a responsible power. These principles such as the creation of a future of win–win cooperation with each country contributing to the best of its ability; a future of the rule of law, fairness, and justice; and a future of inclusiveness, mutual learning, and common development will serve as China's guidelines in its efforts to facilitate the implementation of the Paris Agreement and participate in the design of international systems.

  10. Signal detection in global mean temperatures after "Paris" : An uncertainty and sensitivity analysis

    NARCIS (Netherlands)

    Visser, Hans; Dangendorf, Sönke; Van Vuuren, Detlef P.; Bregman, Bram; Petersen, Arthur C.

    2018-01-01

    In December 2015, 195 countries agreed in Paris to "hold the increase in global mean surface temperature (GMST) well below 2.0 °C above pre-industrial levels and to pursue efforts to limit the temperature increase to 1.5 °C. Since large financial flows will be needed to keep GMSTs below these

  11. Metabolic activity of Glomus intraradices in Arum- and Paris-type arbuscular mycorrhizal colonization

    NARCIS (Netherlands)

    van Aarle, IM; Cavagnaro, TR; Smith, SE; Dickson, S

    Colonization of two plant species by Glomus intraradices was studied to investigate the two morphological types (Arum and Paris), their symbiotic interfaces and metabolic activities. Root pieces and sections were stained to observe the colonization and metabolic activity of all mycorrhizal

  12. 76 FR 12399 - Culturally Significant Objects Imported for Exhibition Determinations: “Paris: Life & Luxury”

    Science.gov (United States)

    2011-03-07

    ... the exhibition ``Paris: Life & Luxury,'' imported from abroad for temporary exhibition within the... objects at the J. Paul Getty Museum, Los Angeles, California, from on or about April 26, 2011, until on or about August 7, 2011, the Museum of Fine Arts, Houston, Texas, from on or about [[Page 12400

  13. De Grande Mosquée de Paris tussen eerbetoon en propaganda

    NARCIS (Netherlands)

    Spaan, S.J.

    2015-01-01

    In het hart van Parijs, tegenover de Jardin des Plantes, staat de Grande Mosquée de Paris, geopend in 1926. In elke toeristische gids staat dat de muntthee en baklava in het café heerlijk zijn en dat de moskee bedoeld was als eerbetoon aan de islamitische soldaten die in de Eerste Wereldoorlog hun

  14. Paris and its long-term temperature goal: First steps on a long road

    Science.gov (United States)

    Rogelj, J.

    2017-12-01

    As a means to achieve its long-term temperature goal, the Paris Agreement put in place a system of regularly updated country pledges alternating with global stocktaking exercises that assess progress towards achieving the Paris goals. By now, the vast majority of countries have submitted their intended actions (also known as Nationally Determined Contributions - NDCs). This begs the question what these amount to and whether they are in line with the agreement`s long-term temperature goal. A structured sensitivity analysis of the emissions implications of the Paris pledges has been carried out, showing that the ambiguity and imprecision of the NDCs leaves open a wide range of possible outcomes by 2030. This range has important implications for the feasibility and cost of pathways that attempt to limit warming to the temperature goals of the Agreement. We identify salient steps to reduce the overall uncertainty, and explore the minimum requirements that have to be met for integrated energy-economy-land models to still find options to stay within the temperature limits of the Paris Agreement. These requirements come under the form of near-term emissions reductions, and assumptions about the deployment of carbon-dioxide removal technologies in the second half of the century.

  15. Learning from CDM SD tool experience for Article 6.4 in the Paris Agreement

    DEFF Research Database (Denmark)

    Olsen, Karen Holm; Arens, Christof; Mersmann, Florian

    2017-01-01

    The Paris Agreement (PA) emphasizes the intrinsic relationship between climate change and sustainable development (SD) and welcomes the 2030 agenda for the global Sustainable Development Goals (SDGs). Yet, there is a lack of assessment approaches to ensure that climate and development goals...

  16. The Online Public Access Catalogue at the Cite des Sciences Mediatheque in Paris.

    Science.gov (United States)

    Witt, Maria

    1990-01-01

    Provides background on the holdings, services, and layout of the mediatheque (multimedia library) at the Cite des Sciences et de l'Industrie (originally the Museum of Science, Technology, and Industry) in Paris. The library's online public access catalog and use of the catalog by children and the visually handicapped are described. (four…

  17. Report of visiting Laboratoire de Physique des Gaz et des Plasmas, Universite Paris-Sud

    International Nuclear Information System (INIS)

    Ferreira, J.L.

    1991-03-01

    The activities carried out by identification mission to the Laboratoire de Physique des Gaz et des Plasmas (LPGP) of Paris-Sud University are related. The mission is part of the project of Study on Plasma wave and Plasma turbulence which is part of international agreement between CAPES and COFECUB in France. (M.C.K.)

  18. Tackling the climate targets set by the Paris Agreement (COP 21 ...

    African Journals Online (AJOL)

    Tackling the climate targets set by the Paris Agreement (COP 21): Green leadership empowers public hospitals to overcome obstacles and challenges in a ... To improve commitment from all involved roleplayers, political leadership, supportive government policies and financial funding is mandatory, or public hospitals will ...

  19. LITERATURA, FOTOGRAFIA E O RETRATO DA MODERNIZAÇÃO DE PARIS, A CAPITAL

    Directory of Open Access Journals (Sweden)

    Marcos Fabris

    2010-05-01

    Full Text Available This article intends to discuss the relationship between literature and photography regarding the processes of modernization which take place in Paris in the 19th century, commenting on the artistic-photographic production of Eugène Atget and the Naturalism of Émile Zola.

  20. L’homme et la bête : chiens et politique dans Les Mohicans de Paris

    Directory of Open Access Journals (Sweden)

    Nicolas Gauthier

    2015-12-01

    Full Text Available Cet article étudie comment le recours à l’animalisation dans Les Mohicans de Paris d’Alexandre Dumas est l’espace d’une véritable réflexion sur les rapports entre l’humain et l’animal. Ceci apparaît de façon nette dans la fictionnalisation du chien qui induit un brouillage des limites séparant humain et animal, brouillage qui a pour fonction de permettre l’articulation des personnages canins aux enjeux fondamentaux du roman. De façon plus précise, la mise en scène du « meilleur ami de l’homme » sert à redoubler le projet politique au cœur des Mohicans de Paris. This paper examines how, in Les Mohicans de Paris, Alexandre Dumas assigns animalistic features to some characters to question the relations between humans and animals while portraying the various dogs in the novel in a way which blurs the limits between humans and animals. These seemingly accessory canine characters are actually closely associated with the fundamental elements of the novel. More precisely, the way “man’s best friend” is put in fiction actually repeats the political project at the heart of Les Mohicans de Paris.

  1. GHG monitoring over Paris megacity and Orléans forest

    Science.gov (United States)

    Te, Y. V.; Jeseck, P.; Zanon, T.; Boursier, C.; Janssen, C.; Deutscher, N. M.; Warneke, T.; Notholt, J.; Lac, C.; Dieudonné, E.; Lopez, M.; Schmidt, M.; Xueref-remy, I. C.

    2012-12-01

    In a growing world with more than 7 billion inhabitants and big emerging countries such as China, Brazil and India, emissions of anthropogenic pollutants and greenhouse gases (GHGs) are increasing continuously. Their monitoring and control in megacities have become a major challenge for scientists and public health authorities in environmental research area. The ground-based Fourier transform spectrometer (QualAir FTS[a], model IFS 125HR) of the QualAir platform located in downtown Paris at University Pierre et Marie Curie (UPMC), is a scientific research instrument dedicated to the survey of greenhouse gases (GHGs) and urban air quality. Equipped with a sun-tracker, the remote sensing QualAir FTS relies on solar infrared absorption for monitoring trace gas concentrations and their variability in the Ile-de-France region[b]. Concentrations of atmospheric GHGs, especially CO2, CH4 and N2O, are retrieved by the radiative transfer model PROFFIT[c]. Because Paris is the third largest European megacity, the QualAir FTS can provide new and complementary measurements as compared to existing ground-based FTS network stations (NDACC and TCCON) located in unpolluted environments, such as the TCCON-Orléans station[d] situated in the forest of Orléans (100 km south of Paris). In the effort to integrate QualAir FTS into the TCCON network, simultaneous FTS measurements of GHGs at Paris and Orléans have been performed. We will emphasize on comparisons of CO2 from these two sites. Our comparison will be completed by high-resolved direct CO2 modeling outputs from the Meso-NH model, and ground in situ measurements at different sites (Orléans/Trainou, Paris/Jussieu, Paris/Eiffel Tower). Parts of the data were acquired in the framework of the French CO2-MEGAPARIS project[e, f], whose main goal is to quantify CO2 emissions from the Paris area. The present data intercomparison will help to reduce uncertainties in carbon cycle models and to better characterize regional GHG fluxes

  2. 3-D basin modelling of the Paris Basin: diagenetic and hydrogeologic implications

    International Nuclear Information System (INIS)

    Violette, S.; Goncalves, J.; Jost, A.; Marsily, G. de

    2004-01-01

    A 3-D basin model of the Paris basin is presented in order to simulate through geological times fluid, heat and solute fluxes. This study emphasizes: i) the contribution of basin models to the quantitative hydrodynamic understanding of behaviour of the basin over geological times; ii) the additional use of Atmospheric General Circulation model (AGCM) to provide palaeo-climatic boundaries for a coupled flow and mass transfer modelling, constrained by geochemical and isotopic tracers and; iii) the integration of different types of data (qualitative and quantitative) to better constrain the simulations. Firstly, in a genetic way, basin model is used to reproduce geological, physical and chemical processes occurring in the course of the 248 My evolution of the Paris basin that ought to explain the present-day hydraulic properties at the regional scale. As basin codes try to reproduce some of these phenomena, they should be able to give a plausible idea of the regional-scale permeability distribution of the multi-layered system, of the pre-industrial hydrodynamic conditions within the aquifers and of the diagenesis timing and type of hydrodynamic processes involved. Secondly, climate records archived in the Paris basin groundwater suggest that climate and morphological features have an impact on the hydrogeological processes, particularly during the last 5 My. An Atmospheric General Circulation model is used with a refined spatial resolution centred on the Paris basin to reproduce the climate for the present, the Last Glacial Maximum (21 ky) and the middle Pliocene (3 My). These climates will be prescribed, through forcing functions to the hydrological code with the main objective of understanding the way aquifers and aquitards react under different climate conditions, the period and the duration of these effects. Finally, the Paris basin has been studied for a number of years by different scientific communities, thus a large amount of data has been collected. By

  3. ClimasCOPe: Exploring the challenges behind the Paris Agreement - COP21

    International Nuclear Information System (INIS)

    Leguet, Benoit; Alberola, Emilie; Afriat, Marion; Vaidyula, Manasvini; Morel, Romain; Cochran, Ian; Deheza, Mariana; Shishlov, Igor; Leseur, Alexia; Depoues, Vivian; Bordier, Cecile; Bultheel, Clement; Bellassen, Valentin

    2015-04-01

    In the framework of the 21. Conference of the Parties (COP21) to the United Nations Framework Convention on Climate Change (UNFCCC), held in Paris from November 30 to December 11 2015, I4CE - Institute for Climate Economics, in partnership with ADEME, the French Environment and Energy Management Agency, attempts to shed some light on the challenges surrounding this Paris Climate Conference 2015. They explore what can be expected from the post-2020 climate agreement in Paris. They also discuss some keys success indicators of such an agreement. Over the course of six issues, ClimasCOPe provides analysis related to carbon pricing, climate finance, greenhouse gas (GHG) emissions' accounting, the role of sub-national actors, adaptation to climate change and the compatibility of government commitments with the scenario where in global mean temperatures would rise by no more than 2 deg. C. Issue 1 - Carbon pricing: a necessary tool on the agenda of solutions for climate funding (Putting a Price on Carbon, First submissions of intended Nationally Determined Contributions for Paris Agreement, 5 carbon pricing initiatives); Issue 2 - Financing the low-carbon transition: the need for coherence between regulations and ambition (Finance will be the cornerstone of the Paris accord, News, 5 initiatives for Climate Finance); Issue 3 - Three keys to effective GHG emissions monitoring for a broader climate agreement (MRV: how to hit the bull's eye when there is no silver bullet? First Climate Week and the Bonn negotiations, 3 MRV initiatives); Issue 4 - Non-state actors: pushing the climate action agenda forward (The role of cities and regions and their knock-on effects, G7 announcements and the process of adopting the SDGs, 4 non-state actor initiatives); Issue 5 - COP 21: a new approach and the launch of a process to address climate change adaptation (Adapting to climate change: taking ownership of the issues and removing barriers to implementation, First COP 21 draft

  4. Effect of Friction Stir Welding Parameters on the Mechanical and Microstructure Properties of the Al-Cu Butt Joint

    Directory of Open Access Journals (Sweden)

    Sare Celik

    2016-05-01

    Full Text Available Friction Stir Welding (FSW is a solid-state welding process used for welding similar and dissimilar materials. FSW is especially suitable to join sheet Al alloys, and this technique allows different material couples to be welded continuously. In this study, 1050 Al alloys and commercially pure Cu were produced at three different tool rotation speeds (630, 1330, 2440 rpm and three different tool traverse speeds (20, 30, 50 mm/min with four different tool position (0, 1, 1.5, 2 mm by friction stir welding. The influence of the welding parameters on the microstructure and mechanical properties of the joints was investigated. Tensile and bending tests and microhardness measurements were used to determine the mechanical properties. The microstructures of the weld zone were investigated by optical microscope and scanning electron microscope (SEM and were analyzed in an energy dispersed spectrometer (EDS. Intermetallic phases were detected based on the X-ray diffraction (XRD analysis results that evaluated the formation of phases in the weld zone. When the welding performance of the friction stir welded butt joints was evaluated, the maximum value obtained was 89.55% with a 1330 rpm tool rotational speed, 20 mm/min traverse speed and a 1 mm tool position configuration. The higher tensile strength is attributed to the dispersion strengthening of the fine Cu particles distributed over the Al material in the stir zone region.

  5. Study of Defect Sizing in Carbon Steel Butt Welds using Conventional Ultrasonic Technique and Phased Array Ultrasonic

    International Nuclear Information System (INIS)

    Amry Amin Abas; Noorhazleena Azaman; Mohd Yusnisyam Mohd Yusoff

    2016-01-01

    Ultrasonic testing is a proven reliable method which is able to detect and measure the size of defects in butt welds with acceptable tolerance. Recent advancement of technology has introduced a computerized technique which is phased array. Phased array employs focal law that enable focusing and steering of beam at the active aperture axis. This enables one line scanning but covering the whole weld volume as compared to conventional technique which employs aster scan and multiple probes to completely cover the whole weld volume. Phased array also gives multiple data view which assist the interpreter. This paper is about the study of these two techniques and technical analysis of comparison between the two. The conventional technique is performed using GE USM GO with 4 MHz 45 degrees shear wave probe. The phased array technique uses OLYMPUS OMNISCAN MX2 with 5L64 linear array probe with 16 elements aperture and 55 degrees wedge emitting shear wave into the specimen. Sensitivity of both techniques are based on 1.5 mm Side Drilled Hole. The results are compared and analysis such as defect sizing and defect type determination are performed. (author)

  6. Utilizing the geochemical data from the National Uranium Resource Evaluation (NURE) program: an evaluation of the Butte quadrangle, Montana

    International Nuclear Information System (INIS)

    Van Eeckhout, E.M.

    1980-12-01

    Some 1370 water and 1951 sediment samples were collected from 1994 locations in the Butte quadrangle, Montana, in 1976 and 1977 by the University of Montana for the Los Alamos Scientific Laboratory (LASL). The LASL analyzed the water samples for uranium and the sediment samples for uranium plus 42 additional elements. The data were then released to the Montana College of Mineral Science and Technology (MCMS and T), which was responsible for the evaluation of the uranium data. The data have subsequently been released by the LASL in an open-file report (Broxton, 1980). Statistical evaluations of the data were undertaken for uranium, copper, lead, zinc, manganese, gold, and silver. The uranium evaluations indicated certain areas in the western part of the quadrangle to be favorable for further investigation (particularly along the Rock Creek), as well as anomalous areas just north of Anaconda. The entire Boulder Batholith area had a high uranium background, but there didn't appear to be any particular site in this area that might be worth pursuing. The multielement evaluations confirmed the known base and precious metal provinces within the quadrangle. A methodology for evaluating data tapes from the National Uranium Resource Evaluation (NURE) program was developed and presented throughout this report. This methodology could be developed further to define areas worth exploring for commodities other than uranium

  7. A Study on the Optimal Welding Condition for Root-Pass in Horizontal Butt-Joint TIG Welding

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Sung Hun; Kim, Jae-Woong [Yeungnam Univ., Gyeongsan (Korea, Republic of)

    2017-04-15

    In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a 2nd regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

  8. A Study on the Optimal Welding Condition for Root-Pass in Horizontal Butt-Joint TIG Welding

    International Nuclear Information System (INIS)

    Jung, Sung Hun; Kim, Jae-Woong

    2017-01-01

    In this study, to investigate the shape of the back bead as a weld quality parameter and to select the optimal condition of the root-pass TIG welding of a horizontal butt-joint, an experimental design and the response surface method (RSM) have been employed. Three parameters are used as input variables, which include the base current, peak current, and welding speed. The back bead width is selected as an output variable representing the weld quality, the target value of the width is 5.4 mm. Conducting the experiments according to the Box-Behnken experimental design, a 2nd regression model for the back bead width was made, and the validation of the model was confirmed by using the F-test. The desirability function was designed through the nominal-the-best formula for the appropriate back bead width. Finally, the following optimal condition for welding was selected using the RSM: base current of 0.9204, peak current of 0.8676, and welding speed of 0.3776 in coded values. For verification, a test welding process under the optimal condition was executed and the result showed the back bead width of 5.38 mm that matched the target value well.

  9. Comparison of Corner-Butt 45 (Cb-45 and Corner-Lap (Cl joints in friction stir welding

    Directory of Open Access Journals (Sweden)

    Setiawan Widia

    2018-01-01

    Full Text Available The 10 mm thick Aluminum 6061 plates have been corner joined using varied design and those were 45° Corner Butt and Corner Lap Joints (CB-45 & CL. Friction tool was hardened EMS 45. True experimental method was used with independent parameters is feed rate which varied at 10 mm/min, 15 mm/min and 30 mm/min respectively. Other parameter such as rotating speed was kept constant. Experiment results show that, CB-45 yields better properties than CL. The tensile strength of CB-45 reaches 163.7 MPa for 10 mm/min feed rate. Whilst CL produces joint with tensile strength equal 120 MPa for equal parameters. Microstructure observation showed that CB-45 produces fine and homogenous appearance of MgO compared to CL. This phenomenon is caused by the pin of CB-45 joint which fully penetrates the nugget zone which is not found in CL design. This microstructure in turn promotes higher tensile strength of CB-45.

  10. The legal character and operational relevance of the Paris Agreement's temperature goal

    Science.gov (United States)

    Rajamani, Lavanya; Werksman, Jacob

    2018-05-01

    This article assesses the legal character and operational relevance of the Paris Agreement's 1.5°C temperature goal. This article begins with a textual analysis of the 1.5°C goal. It considers whether the goal creates individual or collective obligations for Parties, and whether it is sufficiently specific to enable the tracking of individual or collective performance. Next, it assesses the operational relevance of the 1.5°C temperature goal, by considering the role it will play in the Paris Agreement's institutions and procedures. To the extent that the goal plays a role, and implies global limits on greenhouse gas emissions, this article observes that it could have implications for the sharing of the effort between Parties. Thus, this article considers the relevance of equity and the principle of common but differentiated responsibilities and respective capabilities, in the light of different national circumstances, to understanding how the 1.5°C goal could be reached. In this context, this article explores whether the 1.5°C goal could play a role in the Paris Agreement's `ambition cycle'. Finally, this article asks whether there are any legal or political implications, individually or collectively under the Paris Agreement, should the Parties fail to achieve the 1.5°C goal. This article is part of the theme issue `The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'.

  11. Noble Gas Isotope Evidence for Mantle Volatiles in the Cu-Mo Porphyry and Main Stage Polymetallic Veins at Butte, Montana

    Science.gov (United States)

    Hofstra, A. H.; Rusk, B. G.; Manning, A. H.; Hunt, A. G.; Landis, G. P.

    2017-12-01

    Recent studies suggest that volatiles released from mafic intrusions may be important sources of heat, sulfur, and metals in porphyry Cu-Mo-Au and epithermal Au-Ag deposits associated with intermediate to silicic stocks. The huge Cu-Mo porphyry and Main Stage polymetallic vein deposits at Butte are well suited to test this hypothesis because there is no geologic or isotopic evidence of basaltic intrusions in the mine or drill holes. The Butte porphyry-vein system is associated with quartz monzonite stocks and dikes within the southwest part of the Late Cretaceous Boulder batholith. The Boulder batholith was emplaced into Mesoproterozoic to Mesozoic sedimentary rocks and Late Cretaceous volcanic rocks. The Boulder batholith and Butte intrusions have Sri and eNd values indicative of crustal contamination. Eu and Ce anomalies in zircon from Butte intrusions provide evidence of oxidation due to magma degassing. To ascertain the source of volatiles in this system, 11 samples from the Cu-Mo porphyry and 16 from Main Stage veins were selected. The isotopic composition of Ar, Ne, and He extracted from fluid inclusions in quartz, magnetite, pyrite, chalcopyrite, sphalerite, galena, enargite, and covellite were determined. Helium isotopes exceed blank levels in all samples and Ne and Ar in some samples. On a 38Ar/36Ar vs. 40Ar/36Ar diagram, data plot near air. On a 20Ne/22Ne vs. 21Ne/22Ne diagram, data extend from air along the trajectories of OIB and MORB. On a 36Ar/4He vs. 3He/4He RA diagram, data extend from crust toward the air-mantle mixing line. The maximum 3He/4He RA values in the Cu-Mo porphyry (2.86) and Main Stage veins (3.46) are from pyrite and these values correspond to 36 and 43 % mantle helium. The Ne and He results show that fluid inclusions contain volatiles discharged from mantle magmas and that these volatiles were diluted by groundwater containing He derived from country rocks. Despite the lack of mafic intrusions in the Butte magmatic center, noble gas

  12. [Effects of low-light stress on photosynthetic characteristics of Paris polyphylla var. chinensis in artificial domestication cultivation].

    Science.gov (United States)

    Zheng, Shun-lin; Tian, Meng-liang; Liu, Jin-liang; Zhao, Ting-ting; Zhang, Zhong

    2014-09-01

    To decide on the optimum artificial domestication cultivation light environment for Paris polyphylla var. chinensis through investigating the effect of light intensity on leaf's gas exchange parameters, photosynthetic parameters, light saturation point and compensation point of Paris polyphylla var. chinensis. Different low-light stress gradients' effect on the growth of Paris polyphylla var. chinensis was compared with no low-light stress treatment through calculating leaf's gas exchange parameters, photosynthetic parameters, light saturation point and compensation point, and then all these parameters were statistically analyzed. Light intensity had significant influence on the photosynthetic characteristics of Paris polyphylla var. chinensis. With the strengthening of the low-light stress, chlorophyll content, gas exchange parameters, photosynthetic parameters P., AQY and light saturation point all gradually increased at first, and then decreased. However, both photosynthetic parameters Rd and light compensation point firstly decreased and then rose again. These results showed that too strong or too weak light intensity affected the optimization of photosynthetic parameters of Paris polyphylla var. chinensis. The optimal illuminance for each parameter was not completely same, but they could all reach a relative ideal state when the shading ranges between 40% and 60%. However, photosynthetic parameters deteriorated rapidly when the shading surpass 80%. For artificially cultivating Paris polyphylla var. chinensis in Baoxing,Sichuan or the similar ecological region, shading 40%-60% is the optimal light environment, which can enhance the photosynthesis of Paris polyphylla var. chinensis and promote the accumulation of photosynthetic products.

  13. Remote damage control during the attacks on Paris: Lessons learned by the Paris Fire Brigade and evolutions in the rescue system.

    Science.gov (United States)

    Lesaffre, Xavier; Tourtier, Jean-Pierre; Violin, Yann; Frattini, Benoit; Rivet, Catherine; Stibbe, Olivier; Faure, Florian; Godefroy, Anne; Gallet, Jean-Claude; Ausset, Sylvain

    2017-06-01

    On November 13, 2015, in 40 minutes, Paris suffered four suicide bombers attacks; shootings at three different restaurant terraces; and an attack on the Bataclan concert hall, resulting in 130 dead and 495 wounded. How did the Parisian rescue system respond and how did it evolve since?We proved we could deploy quickly wide prehospital and hospital resources and teams' equipment and preparedness is being further developed. To secure a swifter initial response, we need a better integration of the operators of the rescue chain with a simpler and more robust organization as well as improved communications channels. We must continue to anticipate and prepare for possible future attacks.

  14. Technology, environmental protection and economic efficiency. Cables at the Cigre 2010 in Paris; Technik, Umwelt und Wirtschaftlichkeit. Kabeltechnik auf der Cigre 2010 in Paris

    Energy Technology Data Exchange (ETDEWEB)

    Wiznerowicz, Fred [Fachhochschule Hannover (Germany)

    2010-12-13

    Cigre (Conseil International des Grands Reseaux Electriques), founded in 1921, today has about 6,000 members in 90 countries. Their work is reflected in international standards. In consequence, the work of the Cigre is very important for the electric power industry and the public utilities. The 43th Cigre was held in Paris in late August 2010, with an attendance of more than 3,000. The German delegation consisted of more than 220 experts. The conference provided an opportunity to exchange knowledge between the various sectors of power transmission, e.g. cables, overhead transmission lines, switching stations, and environmental aspects. (orig.)

  15. The climate-problem. Evaluation after the Paris-agreement and the Marrakesh-conference; Das Klimaproblem. Bewertung nach dem Paris-Abkommen und der Marrakesch-Konferenz

    Energy Technology Data Exchange (ETDEWEB)

    Roth, Eike

    2017-05-15

    The Paris-Climate-Agreement came into effect on November 4th 2016. Still, the contradiction in this agreement - ambitious goals and (presumably) inadequate commitments - has persisted. Also in the follow-up conference in Marrakesh, this discrepancy remained unresolved. 2017 the countries will meet again. However, since Donald Trump became president-elect of the United States of America, uncertainty about how the largest economy in the world will act in the future has intensified. This amplifies the pressure to clarify the true level of human influence on the climate in a scientifically consistent manner, as a basis for more reliable decisions. This paper tries to contribute to that effort.

  16. The PCNA-associated protein PARI negatively regulates homologous recombination via the inhibition of DNA repair synthesis

    DEFF Research Database (Denmark)

    Burkovics, Peter; Dome, Lili; Juhasz, Szilvia

    2016-01-01

    to inhibit homologous recombination (HR) events. Here, we describe a biochemical mechanism in which PARI functions as an HR regulator after replication fork stalling and during double-strand break repair. In our reconstituted biochemical system, we show that PARI inhibits DNA repair synthesis during...... recombination events in a PCNA interaction-dependent way but independently of its UvrD-like helicase domain. In accordance, we demonstrate that PARI inhibits HR in vivo, and its knockdown suppresses the UV sensitivity of RAD18-depleted cells. Our data reveal a novel human regulatory mechanism that limits...

  17. Conflict of law issues related to Switzerland's participation in the Paris Nuclear Third Party Liability Regime

    International Nuclear Information System (INIS)

    Waldner, Michael

    2012-01-01

    In spite of the active role Switzerland played during the negotiation process of the Paris Convention, it only recently ratified the Convention including all its amending Protocols. The whole Paris regime will become binding for Switzerland only upon entry into force of the Protocols of 2004. Concurrently, the Federal Council will put into force a revised Swiss Nuclear Liability Act and ratify the Joint Protocol. Being a party to the Paris regime and the Joint Protocol, Switzerland will be in treaty relationships with Paris states and with Vienna states which are party to the Joint Protocol. This paper assesses the legal protection of Swiss victims and the liability risks faced by Swiss operators and other potential defendants (such as suppliers and builders) under the new legal regime with a particular view to conflict of laws issues. For the purpose of this assessment the paper examines which courts will be competent to hear claims of Swiss victims and against Swiss defendants in different scenarios, which law these courts should apply, whether or not the principle of legal channelling will apply and what the applicable liability amounts are. The assessment shows an ambiguous picture: Swiss operators, suppliers and builders clearly benefit from a higher degree of legal certainty. While in the absence of treaty relationships Swiss operators could potentially be sued before any foreign court, there will now be only one court with jurisdiction over claims of victims of convention states; Swiss suppliers and builders for their part will be protected by the principle of legal channelling, which basically exempts them from any liability risk. Swiss victims will benefit from treaty-backed entitlement to compensation from foreign operators; also, the judgements rendered in their favour will be enforceable in the whole convention territory; however, the limitation of the operator's liability in many Paris and Vienna states, raises doubts about whether the available funds

  18. Um olhar de descoberta na Paris da Belle Époque

    Directory of Open Access Journals (Sweden)

    João Carrascoza

    2008-09-01

    Full Text Available Ao estilo dos textos de Baudelaire sobre os flâneurs que caminhavam na cidade de Paris, descobrindo os símbolos da modernidade, este artigo narra a chegada de um estrangeiro à capital francesa no início do século XX e seu passeio pela cidade. Ao longo de um dia, ele tomará contato com as obras de importantes artistas como Toulouse-Lautrec, Murcha e Chéret, que desenharam cartazes para shows, embalagens de produtos, folhetos promocionais, entre outras manifestações artísticas exploradas pelo então nascente espírito moderno. À semelhança do romance de Umberto Eco, A misteriosa chama da rainha Loana, que reproduz imagens da cultura pop e erudita em meio à sua narrativa, o texto segue o formato de ensaio ilustrado, fundindo a ficção com os aspectos reais da Paris na efervescência da Belle Époque. A estrutura, portanto, rompe com os gêneros tradicionais dos artigos acadêmicos, apresentando conteúdo reflexivo por meios dos personagens e da trama engendrada. Palavras-chave: Paris; Belle Époque; modernidade; imagens; publicidade. ABSTRACT In the style of Baudelaire’s texts on the flâneurs who used to walk in the city of Paris, finding the symbols of modernity, this article narrates the ar- rival of a foreigner in the early 20th century in Paris, and his tour around the French capital. In the course of one day, he will be in contact with the works of important artists, such as Toulouse-Lautrec, Murcha and Chéret, who drew posters for shows, products’ packages, advertising leaflets, among other artistic manifestations, explored by the then rising modern spirit. Similar to Umberto Eco’s novel The mysterious flame of Queen Loana, which reproduces images of both pop and erudite culture in its narrative, the text follows the illustrated essay format, merging fiction and the real aspects of Paris’ effervescent Belle Époque. The structure, therefore, breaks free from the traditional genres of academic articles, presenting the

  19. Basic numerical study on gap influence of residual stress and distortion during high-brightness laser butt welding

    International Nuclear Information System (INIS)

    Serizawa, Hisashi; Mori, Daiki; Murakawa, Hidekazu

    2013-01-01

    High-brightness laser such as fiber laser or disk laser is expected to minimize the total heat input energy in welding due to its high beam quality, and the welding residual stress and distortion also seem to be reduced as a result. However, the diameter of high-brightness laser beam is less than 0.6 mm and it is difficult to set the beam position to contact face between two parts because in general there would be a gap due to quality of parts. In this study, in order to reveal the effect of gap on the residual stress and the welding distortion during fiber laser welding, the butt welding of two plates were examined through the thermal elastic-plastic analysis with a new gap element. From the result of thermal analyses, it was found that the homogeneous ellipsoid body could be applicable to model the shape of heat source for the fiber laser and the gap width would not influence the penetration shape when the gap width was changed from 0.1 to 0.25 mm. In addition, the elastic-plastic analyses indicated that the transverse shrinkage slightly increased with increasing the gap width, while this shrinkage without gap was much smaller than that with gap. Also, it was revealed that the welding speed largely affects both the welding residual stress and distortion. Moreover, it was found that the residual stress was almost independent of the jig position, while the position of fixtures slightly affected the transverse shrinkage. (author)

  20. Butt Welding of 2205/X65 Bimetallic Sheet and Study on the Inhomogeneity of the Properties of the Welded Joint

    Science.gov (United States)

    Gou, Ning-Nian; Zhang, Jian-Xun; Wang, Jian-Long; Bi, Zong-Yue

    2017-04-01

    The explosively welded 2205 duplex stainless steel/X65 pipe steel bimetallic sheets were butt jointed by multilayer and multi-pass welding (gas tungsten arc welding for the flyer and gas metal arc welding for the transition and parent layers of the bimetallic sheets). The microstructure and mechanical properties of the welded joint were investigated. The results showed that in the thickness direction, microstructure and mechanical properties of the welded joint exhibited obvious inhomogeneity. The microstructures of parent filler layers consisted of acicular ferrite, widmanstatten ferrite, and a small amount of blocky ferrite. The microstructure of the transition layer and flyer layer consisted of both austenite and ferrite structures; however, the transition layer of weld had a higher volume fraction of austenite. The results of the microhardness test showed that in both weld metal (WM) and heat-affected zone (HAZ) of the parent filler layers, the average hardness decreased with the increasing (from parent filler layer 1 to parent filler layer 3) welding heat input. The results of hardness test also indicated that the hardness of the WM and the HAZ for the flyer and transition layers was equivalent. The tensile test combined with Digital Specklegram Processing Technology demonstrated that the fracturing of the welded joint started at the HAZ of the flyer, and then the fracture grew toward the base metal of the parent flyer near the parent HAZ. The stratified impact test at -5 °C showed that the WM and HAZ of the flyer exhibited lower impact toughness, and the fracture mode was ductile and brittle mixed fracture.

  1. The Rise of Massage and Medical Gymnastics in London and Paris before the First World War.

    Science.gov (United States)

    Quin, Grégory

    2017-01-01

    Massage and medical gymnastics experienced a rapid institutionalization across Europe and North America between 1850 and 1914. This article explores how this process took place in London and Paris. Physiotherapy developed many of the hallmarks of an independent discipline during this period, including an identified corpus of manipulations and exercises, some autonomous training courses and degrees for future practitioners, and even the creation of departments within several hospitals. The article analyzes all of the processes surrounding this rise, paying special attention to the influence of the ambassadors of Swedish gymnastics (which led to the re-invention of massage across Europe), to the installation of physiotherapy in hospitals in London and in Paris, and to the practical and institutional innovations driven by nurses in England and by doctors in France.

  2. The Frontier Speaks Back: Two Australian Artists Working in Paris and London

    Directory of Open Access Journals (Sweden)

    Catherine Margaret Speck

    2013-07-01

    Full Text Available Australian artists living and working in Paris and London in the Belle Époque and modern eras had a deep engagement with cosmopolitanism in cities that were at the frontiers of international modernism. They experienced the liberation of putting aside issues of nation, and of working in large, alienating but culturally challenging multi-nation environs in the pre and post war years. This paper will explore how two women artists, Hilda Rix in Paris, a hub of internationalism; and Nora Heysen in London, a city ill-described in the Empire language of ‘home’ for Australians, connected with and articulated cosmopolitan culture. Expatriatism facilitated an offshore variant of Australian modernism.

  3. Freshwater ecosystems could become the biggest losers of the Paris Agreement.

    Science.gov (United States)

    Hermoso, Virgilio

    2017-09-01

    Securing access to energy for a growing population under the international commitment of reduction of greenhouse emissions requires increasing the contribution of renewable sources to the global share. Hydropower energy, which accounts for >80% of green energy, is experiencing a boom fostered by international investment mainly in developing countries. This boom could be further accelerated by the recent climate agreement reached in Paris. Despite its flexibility, hydropower production entails social, economic and ecological risks that need to be carefully considered before investing in the development of potentially thousands of planned hydropower projects worldwide. This is especially relevant given the weak or nonexistent legislation that regulates hydropower project approval and construction in many countries. I highlight the need for adequate policy to provide the Paris Agreement with new financial and planning mechanisms to avoid further and irreversible damage to freshwater ecosystem services and biodiversity. © 2017 John Wiley & Sons Ltd.

  4. Calculations of antiproton-nucleus quasi-bound states using the Paris N bar N potential

    Science.gov (United States)

    Hrtánková, Jaroslava; Mareš, Jiří

    2018-01-01

    An optical potential constructed using the p bar N scattering amplitudes derived from the 2009 version of the Paris N bar N potential is applied in calculations of p bar quasi-bound states in selected nuclei across the periodic table. A proper self-consistent procedure for treating energy dependence of the amplitudes in a nucleus appears crucial for evaluating p bar binding energies and widths. Particular attention is paid to the role of P-wave amplitudes. While the P-wave potential nearly does not affect calculated p bar binding energies, it reduces considerably the corresponding widths. The Paris S-wave potential supplemented by a phenomenological P-wave term yields in dynamical calculations p bar binding energies Bpbar ≈ 200 MeV and widths Γpbar ∼ 200- 230 MeV, which is very close to the values obtained within the RMF model consistent with p bar -atom data.

  5. Economic tools to promote transparency and comparability in the Paris Agreement

    Science.gov (United States)

    Aldy, Joseph; Pizer, William; Tavoni, Massimo; Reis, Lara Aleluia; Akimoto, Keigo; Blanford, Geoffrey; Carraro, Carlo; Clarke, Leon E.; Edmonds, James; Iyer, Gokul C.; McJeon, Haewon C.; Richels, Richard; Rose, Steven; Sano, Fuminori

    2016-11-01

    The Paris Agreement culminates a six-year transition towards an international climate policy architecture based on parties submitting national pledges every five years. An important policy task will be to assess and compare these contributions. We use four integrated assessment models to produce metrics of Paris Agreement pledges, and show differentiated effort across countries: wealthier countries pledge to undertake greater emission reductions with higher costs. The pledges fall in the lower end of the distributions of the social cost of carbon and the cost-minimizing path to limiting warming to 2 °C, suggesting insufficient global ambition in light of leaders’ climate goals. Countries’ marginal abatement costs vary by two orders of magnitude, illustrating that large efficiency gains are available through joint mitigation efforts and/or carbon price coordination. Marginal costs rise almost proportionally with income, but full policy costs reveal more complex regional patterns due to terms of trade effects.

  6. [Stories and drawings by children after the 2015 terrorist attacks in Paris].

    Science.gov (United States)

    Poget, Marc; Bouaziz, Nora; Apter, Gisèle

    2016-01-01

    Through the stories and drawings of children in a medical-psychological centre, it is possible to explore their psychological representations of the terrorist attacks which took place in Paris in January 2015. This work highlights the need to rethink the methods of care provided to these children in order to adapt them to their specific needs. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  7. Letter of the Synod of Paris (360/1 to eastern bishops

    Directory of Open Access Journals (Sweden)

    Zakharov Georgii

    2013-08-01

    Full Text Available The Russian translation from Latin of the letter of the synod of Paris (360/1 to Eastern bishops which is included in Fragmenta historica of Hilarius of Poitiers is published for the first time. The text contains some important evidences on participation of Gallic bishops in the Arian controversy and also attests the high degree of consolidation of the local Churches in Gaul.

  8. The Birth of Artificial Intelligence: First Conference on Artificial Intelligence in Paris in 1951?

    OpenAIRE

    Bruderer , Herbert

    2016-01-01

    International audience; The 1956 Dartmouth conference is often considered as the cradle of artificial intelligence. There is a controversy on its origin. Some historians of computing believe that Turing or Zuse were the fathers of machine intelligence. However, the first working chess-playing automaton was developed by Torres Quevedo by 1912. Moreover, there was a large and important (but forgotten) European conference on computing and human thinking in Paris in 1951.

  9. [Two prize medals from the "Société de Pharmacie de Paris"].

    Science.gov (United States)

    Bonté, F

    1994-01-01

    The author describes two medals from the "Société de Pharmacie de Paris", proving that the medal engraved by Brenet was also used as an award by the Société at the beginning of the 19th century. It also describes for the first time the use of a medal with the effigy of Lavoisier engraved by Caqué as a thesis award from 1871 to at least 1914.

  10. Judging the Paris Agreement: A comparison with IDDRI's 10 criteria for success

    International Nuclear Information System (INIS)

    Deprez, Alexandra; Spencer, Thomas

    2016-03-01

    The Paris Agreement is universal, legally binding and differentiated. (1) It was adopted by consensus by 195 countries, implying a very strong level of global buy-in. (2) It meets the requirements for a treaty under international law, and imposes obligations upon countries regarding NDCs (submission, implementation, transparency). (3) It does not establish new Annexes (cf. Kyoto Protocol) but rather nuances countries' obligations across each of Agreement's elements (i.e. mitigation, adaptation, support), at times specifying differing obligations in line with countries' different national circumstances. The Paris Agreement is ambitious. (4) It reaffirms the goal of maintaining global temperature rise to below 2 deg. C, and operationalizes this target by establishing a goal to achieve net-zero global emissions between 2050 and 2100. It also calls for an aspirational goal of maintaining temperature under 1.5 deg. C. (5) It includes the concept of cycles, whereby countries will regularly revise their national climate ambition upward in a coordinated manner, (8) and an overarching financial objective, strongly signaling to business and investors countries' commitment toward a low-carbon future. (9) Finally, it establishes a single, unified but flexible transparency system for all countries. The Paris Agreement sets up a framework for action beyond mitigation and the UNFCCC. (6) It establishes an overarching goal on adaptation, which can help create a more 'balanced' climate regime in which mitigation and adaptation share equal footing. (7) Even though the very scientifically, legally and politically complex issues of 'liability' have not yet been fully fleshed out, the inclusion in the Paris outcome of a full article on loss and damage is more than many expected. (10) The maintaining of Non-State Actor Zone for Climate (NAZCA) platform created at COP20 to track non-state actors' initiatives shows that the UNFCCC, while remaining the center for state action, aims to help

  11. 18O and 34S in the Upper Bartonium gypsum deposits of the Paris basin

    International Nuclear Information System (INIS)

    Fontes, J.C.; Letolle, R.

    1976-01-01

    Isotopic analyses ( 18 O and 34 S) of the Eocene gypsum from the Paris basin show a range beyond the normal Tertiary marine values. The possibility of a reduction process during diagenesis is discussed. A hypothesis of continental origin by leaching of Permotriassic deposits is proposed for this formation on the basis of a comparison of the isotopic contents recorded from Germany and eastern France

  12. Intense Particulate Pollution Events Observed with Lidar over the Paris Megalopolis

    Science.gov (United States)

    Chazette, Patrick; Royer, Philippe

    2016-06-01

    The great particulate pollution event that affected the Paris Megalopolis in March 2014 was due to long-range transport from the northern-northeastern Europe. Although this phenomenon has appeared as exceptional in the media, this is not an exception and similar events have already been observed by lidar measurements. Here we will briefly describe and illustrate the origin of this intense pollution obviously harmful to health.

  13. Environmental magnetism and magnetic mapping of urban metallic pollution (Paris, France)

    Science.gov (United States)

    Isambert, Aude; Franke, Christine; Macouin, Mélina; Rousse, Sonia; Philip, Aurélio; de Villeneuve, Sybille Henry

    2017-04-01

    Airborne pollution in dense urban areas is nowadays a subject of major concern. Fine particulate pollution events are ever more frequent and represent not only an environmental and health but also a real economic issue. In urban atmosphere, the so-called PM2.5 (particulate matter pollution and determine their sources (Sagnotti et al., 2012). In this study, we report on magnetic measurements of traffic-related airborne PM in the city of Paris, France. Two distinct environments were sampled and analyzed along the Seine River: the aquatic environment in studying fluvial bank and river bed sediments and the atmospheric environment by regarding magnetic particles trapped in adjacent tree barks (Platanus hispanica). About 50 sediment samples and 350 bark samples have been collected and analysed to determine their magnetic properties (susceptibility, hysteresis parameters, IRM, frequency-dependent susceptibility) and to estimate the presence and spatial concentration of superparamagnetic or multi-domain particles for each sample type. The bark results allow proposing a high spatial resolution mapping (pollution. In addition to that, the sampling of banks and riverbed sediments of the Seine allow a global estimation on the anthropogenic versus detrital and biologic input in the city of Paris. The first results presented here show a general increase of the concentration in magnetic particles from upstream to downstream Paris probably linked to urban pollutions as previously observed for suspended particulate matter (Franke et al. 2009; Kayvantash, 2016). Sagnotti, L., & Winkler, A. (2012). On the magnetic characterization and quantification of the superparamagnetic fraction of traffic-related urban airborne PM in Rome, Italy. Atmospheric environment, 59, 131-140. Franke, C., Kissel, C., Robin, E., Bonté, P., & Lagroix, F. (2009). Magnetic particle characterization in the Seine river system: Implications for the determination of natural versus anthropogenic input

  14. Intense Particulate Pollution Events Observed with Lidar over the Paris Megalopolis

    Directory of Open Access Journals (Sweden)

    Chazette Patrick

    2016-01-01

    Full Text Available The great particulate pollution event that affected the Paris Megalopolis in March 2014 was due to long-range transport from the northern-northeastern Europe. Although this phenomenon has appeared as exceptional in the media, this is not an exception and similar events have already been observed by lidar measurements. Here we will briefly describe and illustrate the origin of this intense pollution obviously harmful to health.

  15. Intense Particulate Pollution Events Observed with Lidar over the Paris Megalopolis

    OpenAIRE

    Chazette Patrick; Royer Philippe

    2016-01-01

    The great particulate pollution event that affected the Paris Megalopolis in March 2014 was due to long-range transport from the northern-northeastern Europe. Although this phenomenon has appeared as exceptional in the media, this is not an exception and similar events have already been observed by lidar measurements. Here we will briefly describe and illustrate the origin of this intense pollution obviously harmful to health.

  16. Portuguese knights-errant in nineteenth-century Paris and Rio: translation as response to exile in global cities

    Directory of Open Access Journals (Sweden)

    Rita Bueno Maia

    2017-01-01

    Full Text Available This article aims to uncover the role played by a series of picaresque novels translated into Portuguese and published in midnineteenth-century Paris in helping the Portuguese diaspora cope with the challenges of being a migrant in a global city. Through a contextual analysis, it will be argued that these novels were part of vaster cultural projects aimed at establishing solidarity networks among Portuguese exiles in Paris and, at the same time, at preserving multilingualism. By means of a textual analysis of Dom Severino Magriço ou o Dom Quichote portuguez (Paris, Pillet Fils Aîné, 1851, it will be suggested that this particular target text is committed to helping Portuguese migrants in Paris and in Rio de Janeiro. Furthermore, this novel illustrates ways of engaging with multiple Others, mainly through the reading and comparing of national literary canons.

  17. The Performance of a Cult of the Senses: A Feast of Fans at Jim Morrison's Grave in Paris

    NARCIS (Netherlands)

    Margry, P.J.

    2008-01-01

    This article deals with the different ways fans commemorate and venerate the American rock star and poet Jim Morrison (1943-1971), at his grave at Pere Lachaise cemetary in Paris and for which the senses play an important role.

  18. “Real” Places in Marguerite Duras’s Wartime Paris

    Directory of Open Access Journals (Sweden)

    Jennifer Willging

    2011-06-01

    Full Text Available In the four autobiographical narratives in Marguerite Duras’s La Douleur (1985 The War (1994, over one hundred proper place names appear. While these place names all refer to real places, the relationship between these signifiers and their actual geographical referents is mediated, first by their signifieds—the reader’s mental constructs of the places mentioned—and further by their appearance in a text that necessarily creates its own, non-material world. Yet this essay argues that in this uncharacteristically realist text Duras works hard to create the illusion that the Paris there is in fact Occupied Paris, the real city in which she lived out the experiences recounted in her text. She does this, in large part, by indicating the location of each scene with meticulous precision, thus grounding the stories, quite literally, in a geographically and historically situated reality. While many of these sites are among the best-known, and literal, lieux de mémoire ‘sites of memory’ of the Paris of the Second World War, the mention of more obscure places might appear gratuitous. Yet it is precisely in their gratuity, that such details become essential elements of the forceful effet de réel ‘reality effect’ created in the text.

  19. Food Insecurity in Homeless Families in the Paris Region (France: Results from the ENFAMS Survey

    Directory of Open Access Journals (Sweden)

    Judith Martin-Fernandez

    2018-02-01

    Full Text Available The number of families living in shelters in the Paris region (France has increased by a factor of three in 10 years. In 2013, a survey was performed on homeless families in order to characterize their living conditions, their health needs, and the developmental problems in children. This probability survey was conducted in 17 languages among 801 homeless families sheltered in emergency centers for asylum-seekers, emergency housing centers, social rehabilitation centers, and social hotels in the Paris region. Among the 772 families that provided data on food security only 14.0% were with food security, whereas 43.3% were with low food security and 9.8% with very low food security (a situation where children are also affected. Stratified multivariate robust Poisson models showed that some characteristics are associated with a higher risk of food insecurity and/or of falling into very low food security, such as residential instability, single parenthood, having more than three children, depressive symptoms, housing in social hostels, and difficult access to cheap or free food locally. Given the wealth of the Paris region, resources and programs should be concentrated on improving the living situation of this vulnerable population. It needs better detection of these families, a closer social follow-up, and an increase in food aid.

  20. Food Insecurity in Homeless Families in the Paris Region (France): Results from the ENFAMS Survey

    Science.gov (United States)

    Martin-Fernandez, Judith; Lioret, Sandrine; Vuillermoz, Cécile; Vandentorren, Stéphanie

    2018-01-01

    The number of families living in shelters in the Paris region (France) has increased by a factor of three in 10 years. In 2013, a survey was performed on homeless families in order to characterize their living conditions, their health needs, and the developmental problems in children. This probability survey was conducted in 17 languages among 801 homeless families sheltered in emergency centers for asylum-seekers, emergency housing centers, social rehabilitation centers, and social hotels in the Paris region. Among the 772 families that provided data on food security only 14.0% were with food security, whereas 43.3% were with low food security and 9.8% with very low food security (a situation where children are also affected). Stratified multivariate robust Poisson models showed that some characteristics are associated with a higher risk of food insecurity and/or of falling into very low food security, such as residential instability, single parenthood, having more than three children, depressive symptoms, housing in social hostels, and difficult access to cheap or free food locally. Given the wealth of the Paris region, resources and programs should be concentrated on improving the living situation of this vulnerable population. It needs better detection of these families, a closer social follow-up, and an increase in food aid. PMID:29495563

  1. Elaborating Article 15 of the Paris Agreement: Facilitating Implementation and Promoting Compliance

    International Nuclear Information System (INIS)

    Biniaz, Susan

    2017-10-01

    As climate negotiations reopen on November, 6 at COP23 in Bonn to advance the concrete implementation of the different provisions of the Paris Agreement, this paper aims to take stock of the open questions of Article 15. They concern the role of the Committee responsible for 'facilitating compliance and promoting implementation'. First, the paper outlines what was already decided in Paris in 2015 as well as the issues still to be resolved by the end of 2018. These include the scope of its application, the means to initiate Article 15 as well as the outcomes that the committee can produce and the tools it should have at its disposal. Keeping in mind Paris Agreement's uniqueness and its philosophy, the author attempts to identify the added value of Article 15's mechanism and suggests ways to address the respective expectations and concerns of Parties, in order to progress towards a consensual resolution that is acceptable to a large number of Parties

  2. What Does It Mean to be Central? A Botanical Geography of Paris 1830-1848.

    Science.gov (United States)

    Hoquet, Thierry

    2016-02-01

    This paper focuses on the geography of the botanical community in Paris, under the July Monarchy (1830-1848). At that time, the Muséum d'Histoire naturelle (MHN) was at its institutional acme and, under the impulse of François Guizot, its budget was increasing dramatically. However, closer attention to manuscript sources (correspondence, travel diaries) reveals that the botanists of the time favoured other private institutions, located both on the Right and Left Banks of the Seine. The MHN was prestigious for its collections and professors but it was relatively remote from the centre of Paris, and its plant samples were sometimes difficult to access. Several other first-class private herbaria granted liberal access to botanists: those of Jacques Gay, Phillip Barker Webb, and Benjamin Delessert. Thanks to their wealth, these plant amateurs had ownership of historical herbaria consisting of species types alongside rich botanical libraries. Botanists visiting Paris from foreign countries or other provinces of France also spent some time studying less general plant collections, like those of Count Jaubert, or specialized collections, like Montagne's or Léveillé's on cryptogams. Other botanists also enjoyed renown at the time, although they published little, if anything (like Maire). Living in crammed apartments, literally in the middle of their plant samples, these botanists were key nodes in botanical networks, although they had no relation with the prestigious MHN.

  3. Food Insecurity in Homeless Families in the Paris Region (France): Results from the ENFAMS Survey.

    Science.gov (United States)

    Martin-Fernandez, Judith; Lioret, Sandrine; Vuillermoz, Cécile; Chauvin, Pierre; Vandentorren, Stéphanie

    2018-02-28

    The number of families living in shelters in the Paris region (France) has increased by a factor of three in 10 years. In 2013, a survey was performed on homeless families in order to characterize their living conditions, their health needs, and the developmental problems in children. This probability survey was conducted in 17 languages among 801 homeless families sheltered in emergency centers for asylum-seekers, emergency housing centers, social rehabilitation centers, and social hotels in the Paris region. Among the 772 families that provided data on food security only 14.0% were with food security, whereas 43.3% were with low food security and 9.8% with very low food security (a situation where children are also affected). Stratified multivariate robust Poisson models showed that some characteristics are associated with a higher risk of food insecurity and/or of falling into very low food security, such as residential instability, single parenthood, having more than three children, depressive symptoms, housing in social hostels, and difficult access to cheap or free food locally. Given the wealth of the Paris region, resources and programs should be concentrated on improving the living situation of this vulnerable population. It needs better detection of these families, a closer social follow-up, and an increase in food aid.

  4. Hydrocarbon pollution fixed to combined sewer sediment: a case study in Paris.

    Science.gov (United States)

    Rocher, Vincent; Garnaud, Stéphane; Moilleron, Régis; Chebbo, Ghassan

    2004-02-01

    Over a period of two years (2000-2001), sediment samples were extracted from 40 silt traps (STs) spread through the combined sewer system of Paris. All sediment samples were analysed for physico-chemical parameters (pH, organic matter content, grain size distribution), with total hydrocarbons (THs) and 16 polycyclic aromatic hydrocarbons (PAHs) selected from the priority list of the US-EPA. The two main objectives of the study were (1) to determine the hydrocarbon contamination levels in the sediments of the Paris combined sewer system and (2) to investigate the PAH fingerprints in order to assess their spatial variability and to elucidate the PAH origins. The results show that there is some important inter-site and intra-site variations in hydrocarbon contents. Despite this variability, TH and PAH contamination levels (50th percentile) in the Parisian sewer sediment are estimated at 530 and 18 microg g(-1), respectively. The investigation of the aromatic compound distributions in all of the 40 STs has underlined that there is, at the Paris sewer system scale, a homogeneous PAH background pollution. Moreover, the study of the PAH fingerprints, using specific ratios, suggests the predominance of a pyrolytic origin for those PAHs fixed to the sewer sediment.

  5. Alkylphenolic compounds and bisphenol A contamination within a heavily urbanized area: case study of Paris.

    Science.gov (United States)

    Cladière, Mathieu; Gasperi, Johnny; Lorgeoux, Catherine; Bonhomme, Céline; Rocher, Vincent; Tassin, Bruno

    2013-05-01

    This study evaluates the influence of a heavily urbanized area (Paris Metropolitan area), on receiving water contamination by both bisphenol A (BPA) and alkylphenol ethoxylate (APE) biodegradation product. The study began by investigating concentrations within urban sources. In addition to the more commonly studied wastewater treatment plant effluent, wet weather urban sources (including combined sewer overflows, urban runoff, and total atmospheric fallout) were considered. The initial results highlight a significant contamination of all urban sources (from a few nanograms per liter in atmospheric fallout to several micrograms per liter in the other sources) with clearly distinguishable distribution patterns. Secondly, concentration changes along the Seine River from upstream of the Paris Metropolitan area to downstream were investigated. While the concentrations of BPA and nonylphenoxy acetic acid (NP₁EC) increase substantially due to urban sources, the 4-nonylphenol concentrations remain homogeneous along the Seine. These results suggest a broad dissemination of 4-nonylphenol at the scale of the Seine River basin. Moreover, the relationship between pollutant concentrations and Seine River flow was assessed both upstream and downstream of the Paris conurbation. Consequently, a sharp decrease in dissolved NP1EC concentrations relative to Seine River flow underscores the influence of single-point urban pollution on Seine River contamination. Conversely, dissolved 4-nonylphenol concentrations serve to reinforce the hypothesis of its widespread presence at the Seine River basin scale.

  6. Montenegro on the Path to Paris MoU Accession: Towards Achieving a Sustainable Shipping Industry

    Directory of Open Access Journals (Sweden)

    Jelena Nikcevic

    2018-06-01

    Full Text Available In order to ensure the sustainability of the shipping industry and marine ecosystem of Montenegro, it is necessary that Montenegro becomes a full member of the Paris Memorandum of Understanding (Paris MoU on Port State Control. The reasons for doing so are numerous: the full adoption of standards stipulated by the Memorandum in relation to ship control; continuously keeping pace with, and development of, new standards in compliance with turbulent changes in the maritime industry and operation (including the increasing scope of maritime transport; the decrease in the number of detained ships which meet the requirements stipulated in international Conventions and the elimination of substandard ships in perspective; and the prevention of environmental pollution, and sea and port incidents. This justified endeavour is supported by the fact that Montenegro is one of two countries in Europe that are not full members of the Paris MoU. Additionally, in this context it is necessary to emphasise the fact that the marine ecosystem of Montenegro is an integral part of the world ocean. Accordingly, the improvement of the quality of national legislation which is compliant with international requirements is an imperative which has positive implications on regional and global sustainability.

  7. The withdrawal of the U.S. from the Paris Agreement and its impact on global climate change governance

    OpenAIRE

    Yong-Xiang Zhang; Qing-Chen Chao; Qiu-Hong Zheng; Lei Huang

    2017-01-01

    The global community has prepared for the withdrawal of the U.S. from the Paris Agreement since Donald Trump was elected as the president of the U.S. However, Trump's formal declaration of withdrawal still caused worldwide reaction. Trump will use the withdrawal to build his political reputation and to renegotiate the Paris Agreement despite its negative effects on the political credibility, international relationships, and potential long-term economic growth of the U.S. In general, the withd...

  8. The future of nursing: how important is discipline-specific knowledge? A conversation with Jacqueline Fawcett. Interview by Dr. Janie Butts and Dr. Karen Rich.

    Science.gov (United States)

    Fawcett, Jacqueline

    2012-04-01

    Nurses have long attempted to secure a unique identity for the profession. Many scholars are now promoting an interdisciplinary framework for nursing practice. Fawcett is convinced that interdisciplinary practice poses a danger for nursing to lose its identity and that interdisciplinary practice cannot be successful if members of each discipline do not understand the conceptual models, practice, and research of their own discipline. Dr. Janie Butts and Dr. Karen Rich interviewed Dr. Jacqueline Fawcett about her views related to discipline-specific knowledge and nursing's future. The authors conclude that Fawcett's scientific foundation gives nursing the solidarity and power necessary to determine the unique internal goods of its practice.

  9. Paris saponin-induced autophagy promotes breast cancer cell apoptosis via the Akt/mTOR signaling pathway.

    Science.gov (United States)

    Xie, Zhan-Zhi; Li, Man-Mei; Deng, Peng-Fei; Wang, Sheng; Wang, Lei; Lu, Xue-Ping; Hu, Liu-Bing; Chen, Zui; Jie, Hui-Yang; Wang, Yi-Fei; Liu, Xiao-Xiao; Liu, Zhong

    2017-02-25

    Paris saponins possess anticancer, anti-inflammatory, and antiviral effects. However, the anticancer effect of Paris saponins has not been well elucidated and the mechanisms underlying the potential function of Paris saponins in cancer therapy are needed to be further identify. In this study, we report that saponin compounds isolated from Paris polyphylla exhibited antitumor activity against breast cancer cell lines, MCF-7 and MDA-MB-231. Paris saponin XA-2 induced apoptosis in both cell lines, as evidenced by the activation of caspases and cleavage of Poly (ADP-ribose) polymerase. The ability of XA-2 to induce autophagy was confirmed by acridine orange staining, accumulation of autophagosome-bound Long chain 3 (LC3)-II, and measurement of autophagic flux. XA-2-induced autophagy was observed to promote apoptosis by the combined treatment of breast cancer cell lines with XA-2 and autophagy inhibitors 3-methyladenine and bafilomycin A1, respectively. Moreover, we report a decrease in the levels of Akt/mTOR signaling pathway proteins, such as the phosphorylated forms of Akt, mTOR, P70S6K, and eukaryotic translation initiation factor 4E-binding protein 1 (4EBP1). Taken together, these results provide important insights explaining the anticancer activity of Paris saponins and the potential development of XA-2 as a new therapeutic agent. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. La puissance prescriptive des guides à Paris The prescriptive power of tour guides in Paris. Standardizing elements of tourism ?

    Directory of Open Access Journals (Sweden)

    Gwendal Simon

    2008-10-01

    Full Text Available Les « guide-interprètes » constituent des médiateurs entre les touristes et les espaces. Incarnant une présence physique en mesure d’aider les touristes en les informant sur la ville, ils opèrent comme prescripteurs de choses à voir et à faire. S’ils officient très diversement selon les touristes qu’ils accompagnent, ils exercent toujours leur pratique dans une logique de production de discours sur la ville. À Paris, la dimension muséale et patrimoniale constitue depuis longtemps le socle de l’attractivité touristique, qui continue de capitaliser sur des imaginaires et des pratiques liés à la grande ville d’Art et d’Histoire. Face à la constitution de ce référentiel dominant qui opère comme une force d’ « imposition », les guide-interprètes tentent néanmoins de décentrer le regard par des prescriptions délestées des symboles. C’est cette « tension » entre cet ensemble de références touristiques « à voir » et le souci de montrer la ville dans sa pluralité que nous analysons. Ces éléments nourrissent la réflexion actuelle sur les formes polarisées du tourisme à Paris et l’importance de la production de référents urbains plus contemporains que promeut la municipalité.Tour guides are mediators between tourists and spaces. As they embody a physical presence helping tourists and informing them about the city, they also act as prescribers, laying down what is supposed to be seen and to be done. If their recommendations depend on the tourists they travel with, they always mean to produce a discourse on the city. Paris’ museums and heritage have long since been two cornerstones of her enduring appeal. Confronted with this phenomenon, which tends to standardize the way of visiting a city, tour guides try to free their guidelines of symbolic references. This contribution focuses on the tension between must-see tourist references and the desire to show the city in all its diversity. These

  11. Automobile pollution in Paris, France, influences traffic and meteorological conditions; La pollution automobile a Paris influence du trafic et des conditions meteorologiques

    Energy Technology Data Exchange (ETDEWEB)

    Alary, Rene; Donati, Jacques; Viellard, Henri [Laboratoire Central de la Prefecture de Police, Paris (France)

    1995-06-22

    The improvement of urban air quality is a major challenge namely for NO{sub 2} (nitrogen dioxide), a toxic pollutant controlled by the European Regulation EEC n85-203. We now know that catalytic converters reduce car emissions and we believe that a reduction in traffic (already enforced in some cities) and the restriction of vehicle road traffic, applied to some European towns, is an area for further research. In Paris, the existence of periods of serious pollution (essentially due to NO{sub 2} levels reaching >200 {mu}g/m{sup 3} in periods of several hours) has made the public and public administration aware of the importance of this problem. Thus, a commitment has been made to reduce these periods of severe pollution. The study being presented deals with the search for a correlation between vehicle traffic (vehicle flow/hour) and measured concentrations of NO, NO{sub 2} and CO at two sites in Paris, in 1992. This relation has been established by plotting the traffic levels against concentrations of each gaseous effluent. When the pollutants are well dispersed it is possible to plot the concentrations of NO and NO{sub 2}. The slope is much steeper for NO than for NO{sub 2}. On the other hand, when meteorological conditions are unfavourable (high pressure zone, stability of the atmosphere, temperature inversion or strong solar radiance) no significant correlation could be observed. This proves the predominance of meteorological conditions on NO{sub 2} levels during high pollution periods. The study also confirmed that NO is a very good indicator of car pollution, taking into account the increasing number of diesel powered vehicles in France

  12. Effects of Post-Weld Heat Treatment on the Microstructure and Toughness of Flash Butt Welded High-Strength Low-Alloy Steel

    Science.gov (United States)

    Shajan, Nikhil; Arora, Kanwer Singh; Asati, Brajesh; Sharma, Vikram; Shome, Mahadev

    2018-04-01

    Effect of post-weld heat treatment on the weld microstructure, texture, and its correlation to the toughness of flash butt welded joints were investigated. Upon flash butt welding, the α and γ-fiber in the parent material converted to Goss (110)[001], rotated Goss (110)[1 \\bar{1} 0], and rotated cube (001)[1 \\bar{1} 0], (001)[ \\overline{11} 0] textures along the fracture plane. Formation of these detrimental texture components was a result of shear deformation and recrystallization of austenite at temperatures above T nr resulting in a drop of toughness at the weld zone. Inter-critical and sub-critical annealing cycles proved to be less effective in reducing the Goss (110)[001], rotated Goss (110)[1 \\bar{1} 0], and rotated cube (001)[1 \\bar{1} 0], (001)[ \\overline{11} 0] texture components, and therefore, toughness values remained unaffected. Post-weld heat treatment in the austenite phase field at 1000 °C for 5 seconds resulted in the formation of new grains with different orientations leading to a reduction in the texture intensities of both Goss and rotated Goss components and therefore improved weld zone toughness. Prolonged annealing time was found to be ineffective in improving the toughness due to grain growth.

  13. On detection and automatic tracking of butt weld line in thin wall pipe welding by a mobile robot with visual sensor

    International Nuclear Information System (INIS)

    Suga, Yasuo; Ishii, Hideaki; Muto, Akifumi

    1992-01-01

    An automatic pipe welding mobile robot system with visual sensor was constructed. The robot can move along a pipe, and detect the weld line to be welded by visual sensor. Moreover, in order to make an automatic welding, the welding torch can track the butt weld line of the pipes at a constant speed by rotating the robot head. Main results obtained are summarized as follows: 1) Using a proper lighting fixed in front of the CCD camera, the butt weld line of thin wall pipes can be recongnized stably. In this case, the root gap should be approximately 0.5 mm. 2) In order to detect the weld line stably during moving along the pipe, a brightness distribution measured by the CCD camera should be subjected to smoothing and differentiating and then the weld line is judged by the maximum and minimum values of the differentials. 3) By means of the basic robot system with a visual sensor controlled by a personal computer, the detection and in-process automatic tracking of a weld line are possible. The average tracking error was approximately 0.2 mm and maximum error 0.5 mm and the welding speed was held at a constant value with error of about 0.1 cm/min. (author)

  14. HYDRAULICS, BUTTE COUNTY, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Recent developments in digital terrain and geospatial database management technology make it possible to protect this investment for existing and future projects to...

  15. Paris agreement in the light of the objectives and principles of the contemporary policy and environmental law

    Directory of Open Access Journals (Sweden)

    Todić Dragoljub

    2016-01-01

    Full Text Available The author points to the overall context of the discussion about the problems related to Climate change. The paper analyzes the provisions of the Paris Agreement, adopted on the 21st Conference of the Parties of the UN Framework Convention on Climate Change (Paris, December, 2015. The overall context of the discussion is determined by the content and significance of the objectives and principles defined in the Paris Agreement in relation to the goals and principles of the contemporary policy and environmental law in general. Particular emphasis is given to the place and importance of the objectives related to human rights (the right to a healthy environment and sustainable development. The central part of the paper examines the significance of the objectives and principles in the field of the climate change that are contained in the provisions of the UN Framework Convention on Climate Change with the Kyoto Protocol and other relevant international agreements relevant to climate change that were adopted prior to the Paris Agreement. Further on, the provisions of the Paris Agreement are analyzed, and in particular the parts relating to the objectives and principles. The last part of the paper gives an overview of the relevance of the solutions contained in the Paris Agreement for the Republic of Serbia. Paper provides an overview of the basic strategic and normative elements of national policy in the field of climate change, including the question of objectives and principles. In addition to that it considers the thesis that Paris agreement, aside from the elements of the continuity as the successor of the Kyoto protocol, contains a new element regarding goals and principles of international community's activities in the climate change field.

  16. Formation of secondary organic aerosol in the Paris pollution plume and its impact on surrounding regions

    Science.gov (United States)

    Zhang, Q. J.; Beekmann, M.; Freney, E.; Sellegri, K.; Pichon, J. M.; Schwarzenboeck, A.; Colomb, A.; Bourrianne, T.; Michoud, V.; Borbon, A.

    2015-12-01

    Secondary pollutants such as ozone, secondary inorganic aerosol, and secondary organic aerosol formed in the plumes of megacities can affect regional air quality. In the framework of the FP7/EU MEGAPOLI (Megacities: Emissions, urban, regional and Global Atmospheric POLlution and climate effects, and Integrated tools for assessment and mitigation) project, an intensive campaign was launched in the greater Paris region in July 2009. The major objective was to quantify different sources of organic aerosol (OA) within a megacity and in its plume. In this study, we use airborne measurements aboard the French ATR-42 aircraft to evaluate the regional chemistry-transport model CHIMERE within and downwind of the Paris region. Two mechanisms of secondary OA (SOA) formation are used, both including SOA formation from oxidation and chemical aging of primary semivolatile and intermediate volatility organic compounds (SI-SOA) in the volatility basis set (VBS) framework. As for SOA formed from traditional VOC (volatile organic compound) precursors (traditional SOA), one applies chemical aging in the VBS framework adopting different SOA yields for high- and low-NOx environments, while another applies a single-step oxidation scheme without chemical aging. Two emission inventories are used for discussion of emission uncertainties. The slopes of the airborne OA levels versus Ox (i.e., O3 + NO2) show SOA formation normalized with respect to photochemical activity and are used for specific evaluation of the OA scheme in the model. The simulated slopes were overestimated slightly by factors of 1.1, 1.7 and 1.3 with respect to those observed for the three airborne measurements, when the most realistic "high-NOx" yields for traditional SOA formation in the VBS scheme are used in the model. In addition, these slopes are relatively stable from one day to another, which suggests that they are characteristic for the given megacity plume environment. The configuration with increased primary

  17. The contribution of Paris to limit global warming to 2 °C

    Energy Technology Data Exchange (ETDEWEB)

    Iyer, Gokul C.; Edmonds, James A.; Fawcett, Allen A.; Hultman, Nathan E.; Alsalam, Jameel; Asrar, Ghassem R.; Calvin, Katherine V.; Clarke, Leon E.; Creason, Jared; Jeong, Minji; Kyle, Page; McFarland, James; Mundra, Anupriya; Patel, Pralit; Shi, Wenjing; McJeon, Haewon C.

    2015-11-24

    International negotiators have clearly articulated a goal to limit global warming to 2°C. In preparation for the 21st Conference of Parties (COP21) in Paris in December 2015, countries are submitting their Intended Nationally Determined Contributions (INDCs) to the United Nations Framework Convention on Climate Change indicating their emissions reduction commitments through 2025 or 2030. Limiting global warming to 2°C is a challenging goal and will entail a dramatic transformation of the global energy system, largely complete by 2040. The deliberations in Paris will help determine the balance of challenges faced in the near-term and long-term. We use GCAM, a global integrated assessment model, to analyze the energy and economic-cost implications of INDCs. The INDCs imply near-term actions that reduce the level of mitigation needed in the post-2030 period, particularly when compared with an alternative path, in which nations are unable to undertake emissions mitigation until after 2030. We find that the latter case could require up to 2300 GW of premature retirements of fossil fuel power plants and up to 2900 GW of additional low-carbon power capacity installations within a five-year period of 2031 to 2035. INDCs have the effect of reducing premature retirements and new-capacity installations after 2030 by 50% and 34% respectively. However, if presently announced INDCs were strengthened to achieve greater near-term emissions mitigation, the 2031-2035 transformation could be tempered to require 84% fewer premature retirements of power generation capacity and 56% fewer new-capacity additions. Our results suggest that the ensuing COP21 in Paris will be critical in shaping the challenges of limiting global warming to 2°C.

  18. Implications of possible interpretations of `greenhouse gas balance' in the Paris Agreement

    Science.gov (United States)

    Fuglestvedt, J.; Rogelj, J.; Millar, R. J.; Allen, M.; Boucher, O.; Cain, M.; Forster, P. M.; Kriegler, E.; Shindell, D.

    2018-05-01

    The main goal of the Paris Agreement as stated in Article 2 is `holding the increase in the global average temperature to well below 2°C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1.5°C'. Article 4 points to this long-term goal and the need to achieve `balance between anthropogenic emissions by sources and removals by sinks of greenhouse gases'. This statement on `greenhouse gas balance' is subject to interpretation, and clarifications are needed to make it operational for national and international climate policies. We study possible interpretations from a scientific perspective and analyse their climatic implications. We clarify how the implications for individual gases depend on the metrics used to relate them. We show that the way in which balance is interpreted, achieved and maintained influences temperature outcomes. Achieving and maintaining net-zero CO2-equivalent emissions conventionally calculated using GWP100 (100-year global warming potential) and including substantial positive contributions from short-lived climate-forcing agents such as methane would result in a sustained decline in global temperature. A modified approach to the use of GWP100 (that equates constant emissions of short-lived climate forcers with zero sustained emission of CO2) results in global temperatures remaining approximately constant once net-zero CO2-equivalent emissions are achieved and maintained. Our paper provides policymakers with an overview of issues and choices that are important to determine which approach is most appropriate in the context of the Paris Agreement. This article is part of the theme issue `The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'.

  19. Implications of possible interpretations of "greenhouse gas balance" in the Paris Agreement

    Science.gov (United States)

    Millar, R.; Fuglestvedt, J. S.; Rogelj, J.; Allen, M. R.; Boucher, O.; Forster, P.; Kriegler, E.; Shindell, D. T.

    2017-12-01

    The main goal of the Paris Agreement as stated in its Article 2 is "Holding the increase in the global average temperature to well below 2°C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1.5°C above pre-industrial levels…". Article 4 points to this long-term goal and the need to "… achieve balance between anthropogenic emissions by sources and removals by sinks of greenhouse gases …". The statement on "greenhouse gas balance" is subject to interpretation, and several clarifications are needed in order to make it operational for implementation in climate policies. Here we study possible interpretations from a scientific perspective and analyze their climatic implications. We clarify how the balance referred to in Article 4 of the Paris Agreement applies to anthropogenic sources and anthropogenic sinks and how the implications for individual gases depends strongly on the emission metrics used to relate them. We also show that the way in which balance is interpreted, achieved and maintained influences the anticipated temperature outcome over time. For example, achieving and maintaining net zero CO2-equivalent emissions calculated with the widely used metric Global Warming Potential with a horizon of 100 years (GWP100) - adopted for the implementation of the Kyoto Protocol and in UNFCCC reporting - would result in a peak and decline in global mean temperature. Adopting a different metric, like GWP* (Allen et al., 2016), would result in global mean temperatures remaining approximately constant once net zero CO2-equivalent emissions are achieved and maintained. Policymakers should be aware of these issues and choices and determine which approach is most appropriate in the context of the goals of the Paris Agreement.Reference:Allen, Fuglestvedt, Shine, Reisinger, Pierrehumbert, Forster: New use of global warming potentials to compare cumulative and short-lived climate pollutants. Nature Climate Change (2016). doi:10

  20. Paris vs. Murchison: Impact of hydrothermal alteration on organic matter in CM chondrites

    Science.gov (United States)

    Vinogradoff, V.; Le Guillou, C.; Bernard, S.; Binet, L.; Cartigny, P.; Brearley, A. J.; Remusat, L.

    2017-09-01

    Unravelling the origin of organic compounds that were accreted into asteroids requires better constraining the impact of asteroidal hydrothermal alteration on their isotopic signatures, molecular structures, and spatial distribution. Here, we conducted a multi-scale/multi-technique comparative study of the organic matter (OM) from two CM chondrites (that originate from the same parent body or from identical parent bodies that accreted the same mixture of precursors) and underwent a different degree of hydrothermal alteration: Paris (a weakly altered CM chondrite - CM 2.8) and Murchison (a more altered one - CM 2.5). The Paris insoluble organic matter (IOM) shows a higher aliphatic/aromatic carbon ratio, a higher radical abundance and a lower oxygen content than the Murchison IOM. Analysis of the OM in situ shows that two texturally distinct populations of organic compounds are present within the Paris matrix: sub-micrometric individual OM particles and diffuse OM finely distributed within phyllosilicates and amorphous silicates. These results indicate that hydrothermal alteration on the CM parent body induced aromatization and oxidation of the IOM, as well as a decrease in radical and nitrogen contents. Some of these observations were also reported by studies of variably altered fragment of Tagish Lake (C2), although the hydrothermal alteration of the OM in Tagish Lake was apparently much more severe. Finally, comparison with data available in the literature suggests that the parent bodies of other chondrite petrologic groups could have accreted a mixture of organic precursors different from that accreted by the parent body of CMs.

  1. The meaning of sense of place: The community of Vredefort Dome and Parys, Free State

    Directory of Open Access Journals (Sweden)

    T. Erasmus

    2015-12-01

    Full Text Available The Vredefort Dome was declared a World Heritage Site by the United Nations Educational, Scientific and Cultural Organization (UNESCO in 2005. This status has led to an increase in tourism to the adjacent town of Parys and the Dome as well as an increase in developers that could change the character of the area. Therefore, the sense of place of the residents of, and tourists to the area requires consideration in order to find a balance when development takes place. Sense of place refers to the unique features that gives the area its character and the manner in which people relate to these features. This study investigated the participants’ understanding of sense of place of the area under study. The participants consisted of residents and tourists from Parys and the Dome. The non-probability sampling technique, amongst other, was used. The qualitative research method was utilised to gather data which was analysed through content analysis. Thereupon, themes were identified and interpreted. The connotation the participants attached to sense of place was categorised into three broad themes: affective, anthropogenic and the physical environment. The participants showed a special awareness towards protecting the character, nature and history of the area. Sense of place is rarely considered when development is considered. The findings of this study could be used as a guideline for developers in the area. A better understanding of the relationship between place and the attributes individuals assign to Parys and the Vredefort Dome World Heritage Site may help the stakeholders to acquire enhanced approaches to address, identify and engage the community (both residents and tourists in conservation and future planning processes to ensure the well-being of all concerned.

  2. Implications of possible interpretations of 'greenhouse gas balance' in the Paris Agreement.

    Science.gov (United States)

    Fuglestvedt, J; Rogelj, J; Millar, R J; Allen, M; Boucher, O; Cain, M; Forster, P M; Kriegler, E; Shindell, D

    2018-05-13

    The main goal of the Paris Agreement as stated in Article 2 is 'holding the increase in the global average temperature to well below 2°C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1.5°C'. Article 4 points to this long-term goal and the need to achieve 'balance between anthropogenic emissions by sources and removals by sinks of greenhouse gases'. This statement on 'greenhouse gas balance' is subject to interpretation, and clarifications are needed to make it operational for national and international climate policies. We study possible interpretations from a scientific perspective and analyse their climatic implications. We clarify how the implications for individual gases depend on the metrics used to relate them. We show that the way in which balance is interpreted, achieved and maintained influences temperature outcomes. Achieving and maintaining net-zero CO 2 -equivalent emissions conventionally calculated using GWP 100 (100-year global warming potential) and including substantial positive contributions from short-lived climate-forcing agents such as methane would result in a sustained decline in global temperature. A modified approach to the use of GWP 100 (that equates constant emissions of short-lived climate forcers with zero sustained emission of CO 2 ) results in global temperatures remaining approximately constant once net-zero CO 2 -equivalent emissions are achieved and maintained. Our paper provides policymakers with an overview of issues and choices that are important to determine which approach is most appropriate in the context of the Paris Agreement.This article is part of the theme issue 'The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'. © 2018 The Authors.

  3. Signal detection in global mean temperatures after "Paris": an uncertainty and sensitivity analysis

    Science.gov (United States)

    Visser, Hans; Dangendorf, Sönke; van Vuuren, Detlef P.; Bregman, Bram; Petersen, Arthur C.

    2018-02-01

    In December 2015, 195 countries agreed in Paris to hold the increase in global mean surface temperature (GMST) well below 2.0 °C above pre-industrial levels and to pursue efforts to limit the temperature increase to 1.5 °C. Since large financial flows will be needed to keep GMSTs below these targets, it is important to know how GMST has progressed since pre-industrial times. However, the Paris Agreement is not conclusive as regards methods to calculate it. Should trend progression be deduced from GCM simulations or from instrumental records by (statistical) trend methods? Which simulations or GMST datasets should be chosen, and which trend models? What is pre-industrial and, finally, are the Paris targets formulated for total warming, originating from both natural and anthropogenic forcing, or do they refer to anthropogenic warming only? To find answers to these questions we performed an uncertainty and sensitivity analysis where datasets and model choices have been varied. For all cases we evaluated trend progression along with uncertainty information. To do so, we analysed four trend approaches and applied these to the five leading observational GMST products. We find GMST progression to be largely independent of various trend model approaches. However, GMST progression is significantly influenced by the choice of GMST datasets. Uncertainties due to natural variability are largest in size. As a parallel path, we calculated GMST progression from an ensemble of 42 GCM simulations. Mean progression derived from GCM-based GMSTs appears to lie in the range of trend-dataset combinations. A difference between both approaches appears to be the width of uncertainty bands: GCM simulations show a much wider spread. Finally, we discuss various choices for pre-industrial baselines and the role of warming definitions. Based on these findings we propose an estimate for signal progression in GMSTs since pre-industrial.

  4. Implications of possible interpretations of ‘greenhouse gas balance’ in the Paris Agreement

    Science.gov (United States)

    Millar, R. J.; Allen, M.; Boucher, O.; Cain, M.; Forster, P. M.; Shindell, D.

    2018-01-01

    The main goal of the Paris Agreement as stated in Article 2 is ‘holding the increase in the global average temperature to well below 2°C above pre-industrial levels and pursuing efforts to limit the temperature increase to 1.5°C’. Article 4 points to this long-term goal and the need to achieve ‘balance between anthropogenic emissions by sources and removals by sinks of greenhouse gases'. This statement on ‘greenhouse gas balance’ is subject to interpretation, and clarifications are needed to make it operational for national and international climate policies. We study possible interpretations from a scientific perspective and analyse their climatic implications. We clarify how the implications for individual gases depend on the metrics used to relate them. We show that the way in which balance is interpreted, achieved and maintained influences temperature outcomes. Achieving and maintaining net-zero CO2-equivalent emissions conventionally calculated using GWP100 (100-year global warming potential) and including substantial positive contributions from short-lived climate-forcing agents such as methane would result in a sustained decline in global temperature. A modified approach to the use of GWP100 (that equates constant emissions of short-lived climate forcers with zero sustained emission of CO2) results in global temperatures remaining approximately constant once net-zero CO2-equivalent emissions are achieved and maintained. Our paper provides policymakers with an overview of issues and choices that are important to determine which approach is most appropriate in the context of the Paris Agreement. This article is part of the theme issue ‘The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'. PMID:29610378

  5. Impact of the new Sendai framework for disaster risk reduction on Paris flood prevention program

    Directory of Open Access Journals (Sweden)

    Thepot Regis

    2016-01-01

    Full Text Available The greater Paris region faces a significant risk of flooding due to potential spill-over from the Seine and the Marne. Because the last major flood occurred in 1910, the event has faded in the collective memory. Consequently, the population and the public authorities have difficulty imagining that such a catastrophe might repeat itself. In parallel, widespread urban expansion into flood zones has considerably aggravated the foreseeable damage if an event of a comparable intensity were to hit the region.In response to this situation, the EPTB Seine Grands Lacs – a public territorial basin establishment– decided to take action to reduce this risk.It began by commissioning a study from the OECD on flood risk prevention in the Seine Basin. This study was presented in January 2014 and highlighted the considerable risk of flooding in or near Paris, which could, affect a total of nearly 5 million people, cause up to €30 billion in direct damage and affect up to 400.000 jobs. It also put forward 14 recommendations that are being implemented by the public authorities, at either the national, basin or local level.The EPTB launched in partnership with the government a second initiative for which it steers and coordinates a coherent, balanced, relevant and gradual programme of 78 flood prevention actions. As a new post-2015 framework for disaster risk reduction was adopted in Sendai in March 2015 taking in account lessons learned during the 2005-2015 period, gaps identified and future challenges, this paper addresses the question of the impact of this new international framework on the implementation of the flood prevention of Paris region. One of the main points developed is the necessity to increase public awareness, to enhance disaster preparedness for effective response and to “build back better” in recovery rehabilitation and reconstruction.

  6. Long-term damage to glass in Paris in a changing environment.

    Science.gov (United States)

    Ionescu, Anda; Lefèvre, Roger-Alexandre; Brimblecombe, Peter; Grossi, Carlota M

    2012-08-01

    Glass weathering depends mainly on its chemical composition: Si-Ca-K mediaeval glass is low durable, while Si-Ca-Na Roman as well as modern glass are very durable. Mediaeval glass is subject to the superficial leaching of K and Ca ions leading to the formation of a hydrated silica-gel layer. Both types of glass develop a superficial stratum of deposited atmospheric particles cemented by crystals of gypsum (and syngenite in the case of Si-Ca-K glass), leading to an impairment of the optical properties: decrease of transparency and increase of haze. Dose-response functions established for the two types of glass reveal that haze depends only on pollution parameters (PM, SO(2), NO(2)), while leaching depends both on pollution and climate parameters (RH, T, SO(2), NO(2)). Instrumental records are available for temperature in Paris from 1800. Air pollution in Paris was estimated from statistics of fuel use from 1875 to 1943, measurements that started in the 1950s and projections across the 21st century. The estimated annual rate of haze development indicates a gradual rise from the 16th century. The increasing importance of coal as a fuel through the 19th century and enhanced sulphur dioxide concentration make a rapid increase in haze formation, which reaches a peak about 1950. The likely damage to mediaeval glass follows a rather similar pattern. The period of damage from aggressive pollutants looks later and for a briefer time in Paris than in London. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. The Daily Life of a Grantee in Paris. Attitudes, Perceptions, Practices

    Directory of Open Access Journals (Sweden)

    IONUŢ BUTOI

    2013-07-01

    Full Text Available This research examines the importance of the 1932-1934 Paris scholarship of Ştefania Cristescu (one of the most important monographists of the Gustian School, viewed both as a personal strategic choice meant to consolidate her status as an academic researcher and as an occasion for us to learn about the daily life of the interwar Romanian students in Western Europe. I discuss in this paper why it is important to develop a social history of the academic formation of the intellectual elites of modern Romania through scholarships in foreign countries.

  8. PARIS project: Radiolytic oxidation of molecular iodine in containment during a nuclear reactor severe accident

    Energy Technology Data Exchange (ETDEWEB)

    Bosland, L. [Institut de Radioprotection et de Surete Nucleaire, DPAM, SEMIC, LETR - CEN Cadarache, BP 3, 13115 Saint Paul Lez Durance (France)], E-mail: loic.bosland@irsn.fr; Funke, F. [AREVA NP GmbH, Technical Center, P.O. Box 1109, D-91001 Erlangen (Germany); Girault, N. [Institut de Radioprotection et de Surete Nucleaire, DPAM, SEMIC, LETR - CEN Cadarache, BP 3, 13115 Saint Paul Lez Durance (France); Langrock, G. [AREVA NP GmbH, Technical Center, P.O. Box 1109, D-91001 Erlangen (Germany)

    2008-12-15

    In case of a hypothetical severe accident in a nuclear LWR (light water reactor), the high radiation fields reached in the reactor containment building due to the release of fission products from the reactor core could induce air radiolysis. The air radiolysis products could, in turn, oxidise gaseous molecular iodine into aerosol-borne iodine-oxygen-nitrogen compounds. Thereby, this reaction involves a change of iodine speciation and a decrease of iodine volatility in the reactor containment atmosphere. Kinetic data were produced within the PARIS project on the air radiolysis products formation and destruction, and on their reaction with molecular iodine, with the objective of developing and validating existing kinetic models. The current paper includes the non-iodine tests of the PARIS project whose objective was to determine the rates of formation and destruction of air radiolysis products in the presence of both structural containment surfaces (decontamination coating ('paint') and stainless steel), aerosol particles such as silver rich particles (issued from the control rods) in boundary conditions representative for LWR or PHEBUS facility containments. It is found that the air radiolysis products concentration increases with dose and tend to approach saturation levels at doses higher than about 1 kGy. This behaviour is more evident in oxygen/steam atmospheres, producing ozone, than in air/30% (v/v) steam atmospheres, the latter favouring the model-predicted on-going production of nitrogen dioxide even at very high doses. No significant effect of temperature, dose rate and hydrogen addition (4%, v/v) was observed. Furthermore, the inserted surfaces do not exhibit significant effects on the air radiolysis concentrations. However, these 'non-noticeable influence' could be due to a masking of small effects by the appreciable scattering of the experimental air radiolysis product concentrations. The PARIS results are then analysed using two

  9. Feasibility of CO2 storage in geothermal reservoirs example of the Paris Basin - France. Final report

    International Nuclear Information System (INIS)

    Barbier, J.; Robelin, C.; Kervevan, C.; Thiery, D.; Menjoz, A.; Matray, J.M.; Cotiche, C.; Herbrich, B.

    2003-01-01

    This study is realized in the framework of GESCO project, which aims to provide the first documentation that, for emission sources within selected key areas, sufficient geological storage capacity is available. Then the BRGM/ANTEA/CFG took care to provide: an inventory of the CO 2 emitters in France, an inventory of the main deep aquifers present in the Paris basin, an evaluation of the storage capacities of CO 2 in one of the four principal case-study, technical solutions for CO 2 injection in geothermal aquifers and an evaluation of the cost of CO 2 storage in such an aquifer. (A.L.B.)

  10. THE DAILY LIFE OF A GRANTEE IN PARIS. ATTITUDES, PERCEPTIONS, PRACTICES

    Directory of Open Access Journals (Sweden)

    lecturer IONUŢ BUTOI

    2013-05-01

    Full Text Available This research examines the importance of the 1932–1934 Paris scholarship of Ştefania Cristescu (one of the most important monographists of the Gustian School, viewed both as a personal strategic choice meant to consolidate her status as an academic researcher and as an occasion for us to learn about the daily life of the interwar Romanian students in Western Europe. I discuss in this paper why it is important to develop a social history of the academic formation of the intellectual elites of modern Romania through scholarships in foreign countries

  11. Raphaël Blanchard, parasitology, and the positioning of medical entomology in Paris.

    Science.gov (United States)

    Osborne, M A

    2008-12-01

    The histories of medical entomology and parasitology are entwined. Raphaël Blanchard (1857-1919), Chair of Medical Natural History and Parasitology at the Faculty of Medicine in Paris, organized the teaching of medical entomology and civilian colonial medicine. He also founded and edited the journal Archives de Parasitologie and started the Institute de Médecine Coloniale where he mentored many foreign students and researchers. Additionally, Blanchard is important for his scientific internationalism and medical historical work on the cultural location of parasitology and for training the future professors of parasitology Jules Guiart, Emile Brumpt, and Charles Joyeux.

  12. Fatigue crack growth behavior of RAFM steel in Paris and threshold regimes at different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Babu, M. Nani; Sasikala, G., E-mail: gsasi@igcar.gov.in; Dutt, B. Shashank; Venugopal, S.; Bhaduri, A.K.; Jayakumar, T.

    2014-04-01

    Fatigue crack growth (FCG) behavior of a reduced activation ferritic martensitic (indigenous RAFM) steel has been evaluated at 300, 653 and 823 K in Paris and threshold regimes. The effect of temperature on threshold stress intensity factor range and associated crack closure mechanisms is highlighted. The FCG results were compared with those for EUROFER 97. Further, crack tip effective stress intensity factor ranges (ΔK{sub tip,eff}) have been evaluated by taking crack tip shielding into account in order to examine the effect of temperature on true intrinsic FCG behavior.

  13. Greenlite™: a year of carbon dioxide monitoring over paris, france, and recent progress in monitoring methane

    Science.gov (United States)

    Dobler, Jeremy; Zaccheo, T. Scott; Pernini, Timothy; Blume, Nathan; Braun, Michael

    2018-04-01

    GreenLITE™ is a ground-based laser absorption spectroscopy system capable of measuring and mapping CO2 concentrations over areas up to 25 km2. The system was deployed for COP21 as a demonstration and has now completed a year of CO2 measurements over the city of Paris, France. We will discuss lessons learned and relevant data from the year-long deployment. Recently, the system has demonstrated the same measurement capability for CH4, and results from preliminary testing are presented.

  14. AMERICAN MANUFACTURING, AMERICAN TECHNOLOGY AND THE LABOR QUESTION AT THE PARIS EXPOSITION UNIVERSELLE OF 1867

    Directory of Open Access Journals (Sweden)

    Gregory Zieren

    2004-01-01

    Full Text Available The Paris Exposition Universelle of 1867 was devoted to the theme, “The History of Labor,” and awarded special prizes to firms with paternalistic labor policies to promote harmony between workers and employers. The guiding spirit of the Exposition and its labor theme was the French social thinker, Frédéric Le Play. American technology was a second trend on view at the Exposition, and American firms, including the Pacific Mills of Lawrence,MA won gold medals and international recognition.

  15. Tackling air pollution and extreme climate changes in China: Implementing the Paris climate change agreement.

    Science.gov (United States)

    Tambo, Ernest; Duo-Quan, Wang; Zhou, Xiao-Nong

    2016-10-01

    China still depends on coal for more than 60% of its power despite big investments in the process of shifting to nuclear, solar and wind power renewable energy resources alignment with Paris climate change agreement (Paris CCA). Chinese government through the Communist Party Central Committee (CPCC) ascribes great importance and commitment to Paris CCA legacy and history landmark implementation at all levels. As the world's biggest carbon dioxide emitter, China has embarked on "SMART" pollution and climate changes programs and measures to reduce coal-fired power plants to less than 50% in the next five years include: new China model of energy policies commitment on CO2 and greenhouse gas emissions reductions to less than 20% non-fossil energy use by 2030 without undermining their economic growth, newly introduced electric vehicles transportation benefits, interactive and sustained air quality index (AQI) monitoring systems, decreasing reliance on fossil fuel economic activities, revision of energy price reforms and renewable energy to less energy efficient technologies development. Furthermore, ongoing CPCC improved environmental initiatives, implemented strict regulations and penalties on local companies and firms' pollution production management, massive infrastructures such as highways to reduce CO2 expansion of seven regional emissions trading markets and programs for CO2 emissions and other pollutants are being documented. Maximizing on the centralized nature of the China's government, implemented Chinese pollution, climate changes mitigation and adaptation initiatives, "SMART" strategies and credible measures are promising. A good and practical example is the interactive and dynamic website and database covering 367 Chinese cities and providing real time information on environmental and pollution emissions AQI. Also, water quality index (WQI), radiation and nuclear safety monitoring and management systems over time and space. These are ongoing Chinese

  16. Imidž značky Kérastase Paris

    OpenAIRE

    Bláhová, Petra

    2014-01-01

    The aim of the diploma thesis is to determine a perception of the brand Kérastase Paris by consumers in Czech republic and Slovakia and compare it with the identity of the brand. I want to expose consumer habbits in the field of hair care and find out opinion about marketing communication of the brand Kérastase, that is supposed to correspondent with the brand strategy. I also want to expose main characteristics of loyal customer of the brand and propose some marketing recommendation for the ...

  17. Marketingové komunikace značky L´Oréal Paris

    OpenAIRE

    Nguyen, Thanh Hang

    2016-01-01

    Diploma thesis is focused on marketing communication of a brand Loréal Paris in decorative cosmetics. Marketing strategy and commercial communications mix is described in theoretical part. As well as what brand stands for, what values does is hold and other brand elements. Practical part is aimed on international cosmetics market and analysis of Czech decorative cosmetics market. Thesis also covers introduction of Loréal company and its portfolio. We will have a chance to get to know Loréal P...

  18. The climate-problem. Evaluation after the Paris-agreement and the Marrakesh-conference

    International Nuclear Information System (INIS)

    Roth, Eike

    2017-01-01

    The Paris-Climate-Agreement came into effect on November 4th 2016. Still, the contradiction in this agreement - ambitious goals and (presumably) inadequate commitments - has persisted. Also in the follow-up conference in Marrakesh, this discrepancy remained unresolved. 2017 the countries will meet again. However, since Donald Trump became president-elect of the United States of America, uncertainty about how the largest economy in the world will act in the future has intensified. This amplifies the pressure to clarify the true level of human influence on the climate in a scientifically consistent manner, as a basis for more reliable decisions. This paper tries to contribute to that effort.

  19. European Anarchism and its Early Influences in Mexico after the Paris Commune: 1871- 1881

    Directory of Open Access Journals (Sweden)

    Clara E. Lida

    2001-07-01

    Full Text Available This article examines the links between European anarchism and social and agrarian movements in Mexico  after the Paris Commune. During those years, while anarchists remained in clandestinity, they developed new revolutionary theories and practices. These included the organization in freely federated autonomous communes, and the right to the land and the product of labor. Occasionally, such reivindications intertwined with those of the agrarian communities in Mexico allowing for European anarchism and Mexican social and peasant groups to come in contact with each other.

  20. PARIS project: Radiolytic oxidation of molecular iodine in containment during a nuclear reactor severe accident

    International Nuclear Information System (INIS)

    Bosland, L.; Funke, F.; Girault, N.; Langrock, G.

    2008-01-01

    In case of a hypothetical severe accident in a nuclear LWR (light water reactor), the high radiation fields reached in the reactor containment building due to the release of fission products from the reactor core could induce air radiolysis. The air radiolysis products could, in turn, oxidise gaseous molecular iodine into aerosol-borne iodine-oxygen-nitrogen compounds. Thereby, this reaction involves a change of iodine speciation and a decrease of iodine volatility in the reactor containment atmosphere. Kinetic data were produced within the PARIS project on the air radiolysis products formation and destruction, and on their reaction with molecular iodine, with the objective of developing and validating existing kinetic models. The current paper includes the non-iodine tests of the PARIS project whose objective was to determine the rates of formation and destruction of air radiolysis products in the presence of both structural containment surfaces (decontamination coating ('paint') and stainless steel), aerosol particles such as silver rich particles (issued from the control rods) in boundary conditions representative for LWR or PHEBUS facility containments. It is found that the air radiolysis products concentration increases with dose and tend to approach saturation levels at doses higher than about 1 kGy. This behaviour is more evident in oxygen/steam atmospheres, producing ozone, than in air/30% (v/v) steam atmospheres, the latter favouring the model-predicted on-going production of nitrogen dioxide even at very high doses. No significant effect of temperature, dose rate and hydrogen addition (4%, v/v) was observed. Furthermore, the inserted surfaces do not exhibit significant effects on the air radiolysis concentrations. However, these 'non-noticeable influence' could be due to a masking of small effects by the appreciable scattering of the experimental air radiolysis product concentrations. The PARIS results are then analysed using two different kinetic models

  1. Paris Agreement on Climate Change: A Booster to Enable Sustainable Global Development and Beyond.

    Science.gov (United States)

    Bhore, Subhash Janardhan

    2016-11-14

    The global warming and its adverse effects on the atmosphere, the biosphere, the lithosphere, and the hydrosphere are obvious. Based on this fact, the international community is fully convinced that we need to fix the problem urgently for our survival, good health, and wellbeing. The aim of this article is to promote the awareness about the United Nations (UN) historic 'Paris Agreement on Climate Change (PACC)' which entered into-force on 4 November 2016. The expected impact of PACC on the global average temperature rise by 2100 as well as its role in enabling accomplishment of global sustainable development goals (SDGs) for the people and planet is also highlighted.

  2. CHARGING THE WEIGHT OF WORDS AND THE CLASH OF IMAGES: Historical mapping of editorial features of Paris Match

    Directory of Open Access Journals (Sweden)

    Eliza Bachega Casadei

    2016-12-01

    Full Text Available A revista francesa Paris Match foi uma influência decisiva na modulação dos projetos editoriais de muitas revistas brasileiras importantes, como O Cruzeiro e Manchete. Não obstante isso, são poucos os trabalhos que exploram os aspectos editoriais da publicação francesa. Diante disso, o objetivo do presente artigo é, a partir de uma revisão bibliográfica, realizar um mapeamento histórico dos aspectos editoriais de Paris Match, bem como a forma como eles foram sendo modificados ao longo do tempo.   PALAVRAS-CHAVE: Paris Match; história; projeto editorial.   ABSTRACT The French magazine Paris Match had a decisive influence on the modulation of editorial projects of many important Brazilian magazines such as O Cruzeiro and Manchete. Nevertheless, there are few works that explore the editorial aspects of this French publication. Thus, the purpose of this article is from a literature review, conduct a historical mapping of the editorial aspects of Paris Match, as well as the way they were being modified over time.   KEYWORDS: Paris Match; history; editorial project.     RESUMEN La revista francesa Paris Match tuve una influencia decisiva en la modulación de los proyectos editoriales de varias revistas brasileñas importantes tales como O Cruzeiro y Manchete. Sin embargo, son escasos los trabajos que exploran los aspectos editorialies de la publicación francesa. Por lo tanto, el propósito de este artículo es, de una revisión de la literatura, llevar a cabo una asignación histórica de los aspectos editoriales de Paris Match, así como la forma en que se están modificando con el tiempo.   PALABRAS CLAVE: Paris Match; historia; proyecto editorial. Arquivamento e preservação de longo prazo do arquivo em: OpenDepot / Edina (The University of Edinburgh:  em processo de inclusão/indexação SSOAR-GESIS – Leibniz-Institut (Alemanha:  HAL (França: em processo de inclusão/indexação

  3. L'espace touristique de la grande ville : une approche par les pratiques et les mobilités touristiques. Le cas de la destination Paris.

    OpenAIRE

    Lepan , Laurie

    2013-01-01

    Paris is an important tourism destination in the world with more than 20 millions of tourists every year. While studies are still relatively absent on tourism in Paris, we purpose to contribute to the discussion. After a state of art to identify the main themes addressed in the tourism and the city, and the Paris case, we chose to focus this PHD on tourists through their practices and mobilities. At a time where many are discussing on the metropolitan scale of Paris, we wanted to think of Par...

  4. Nuclear liability: Joint protocol relating to the application of the Vienna Convention and the Paris Convention, 1988

    International Nuclear Information System (INIS)

    1989-10-01

    The Joint Protocol Relating to the Application of the Vienna Convention and the Paris Convention was adopted by the Conference on the Relationship between the Paris Convention and the Vienna Convention, which met in Vienna, at the Headquarters of the International Atomic Energy Agency on 21 September 1988. The Joint Protocol establishes a link between the Paris Convention on Third Party Liability in the Field of Nuclear Energy of 1960 and the Vienna Convention on Civil Liability for Nuclear Damage of 1963. The Joint Protocol will extend to the States adhering to it the coverage of the two Conventions. It will also resolve potential conflicts of law, which could result from the simultaneous application of the two Conventions to the same nuclear accident. The Conference on the Relationship between the Paris Convention and the Vienna Convention was jointly organized by the International Atomic Energy Agency and the OECD Nuclear Energy Agency. This publication contains the text of the Final Act of the Conference in the six authentic languages, the Joint Protocol Relating to the Application of the Vienna Convention and the Paris Convention, also in the six authentic languages and an explanatory note, prepared by the IAEA and NEA Secretariats, providing background information on the content of the Joint Protocol

  5. Busted Butte : final report on laboratory radionuclide migration experiments in non-welded tuff under unsaturated and saturated conditions

    International Nuclear Information System (INIS)

    Vandergraaf, T.T.; Drew, D.J.; Ticknor, K.V.; Hamon, C.J.

    2004-01-01

    Three blocks of non-welded tuff, one nominally one cubic foot (trial block) in volume and the other two, nominally one cubic meter (1 m 3 ) in volume, were excavated from the Busted Butte Test Facility on the Nevada Test Site in 1999 and transported to the Atomic Energy of Canada Limited Whiteshell Laboratories in Pinawa, Manitoba. The trial block and one of the 1-m 3 blocks were used for radionuclide migration experiments under unsaturated conditions; the remaining 1-m3 block was used for similar migration experiments under saturated conditions. After a vertical flow of synthetic transport solution was set up under unsaturated conditions, a suite of conservative and chemically reactive radionuclide tracers was injected at volumetric flow rates of 20 mL/hr in the trial block, and 10 mL/hr in two locations on the upper surface of the 1-m 3 block. These flow rates correspond to infiltration rates of about 120 cm/year and about 17 cm/year, respectively. The duration of the migration experiment in the trial block was 87 days, while the migration experiment in the 1-m3 block was performed for a period of 588 days. Results obtained from the migration experiment in the trial block showed that transport of 95m+99 Tc, injected as the pertechnetate (an)ion, was slightly faster than that of the transport solution, using tritiated water ( 3 H 2 0) as a flow indicator. Retardation of 237 Np was consistent with that predicted from results obtained in supporting static batch sorption studies. Post-migration analysis of the flow field in the trial block showed that the front of the 22 Na plume had migrated about half the distance through the block, and that 60 Co and 137 Cs had been retained near the inlet. This observation agrees qualitatively with that predicted from the results obtained in static batch sorption studies. In the larger-scale experiment, the transport behavior of Tc was also very similar to that of the transport solution. None of the other radionuclide tracers

  6. Global mean sea-level rise in a world agreed upon in Paris

    Science.gov (United States)

    Bittermann, Klaus; Rahmstorf, Stefan; Kopp, Robert E.; Kemp, Andrew C.

    2017-12-01

    Although the 2015 Paris Agreement seeks to hold global average temperature to ‘well below 2 °C above pre-industrial levels and to pursue efforts to limit the temperature increase to 1.5 °C above pre-industrial levels’, projections of global mean sea-level (GMSL) rise commonly focus on scenarios in which there is a high probability that warming exceeds 1.5 °C. Using a semi-empirical model, we project GMSL changes between now and 2150 CE under a suite of temperature scenarios that satisfy the Paris Agreement temperature targets. The projected magnitude and rate of GMSL rise varies among these low emissions scenarios. Stabilizing temperature at 1.5 °C instead of 2 °C above preindustrial reduces GMSL in 2150 CE by 17 cm (90% credible interval: 14-21 cm) and reduces peak rates of rise by 1.9 mm yr-1 (90% credible interval: 1.4-2.6 mm yr-1). Delaying the year of peak temperature has little long-term influence on GMSL, but does reduce the maximum rate of rise. Stabilizing at 2 °C in 2080 CE rather than 2030 CE reduces the peak rate by 2.7 mm yr-1 (90% credible interval: 2.0-4.0 mm yr-1).

  7. 'A thorn in the side of European geodesy': measuring Paris-Greenwich longitude by electric telegraph.

    Science.gov (United States)

    Kershaw, Michael

    2014-12-01

    The difference in longitude between the observatories of Paris and Greenwich was long of fundamental importance to geodesy, navigation and timekeeping. Measured many times and by many different means since the seventeenth century, the preferred method of the later nineteenth and early twentieth centuries made use of the electric telegraph. I describe here for the first time the four Paris-Greenwich telegraphic longitude determinations made between 1854 and 1902. Despite contemporary faith in the new technique, the first was soon found to be inaccurate; the second was a failure, ending in Anglo-French dispute over whose result was to be trusted; the third failed in exactly the same way; and when eventually the fourth was presented as a success, the evidence for that success was far from clear-cut. I use this as a case study in precision measurement, showing how mutual grounding between different measurement techniques, in the search for agreement between them, was an important force for change and improvement. I also show that better precision had more to do with the gradually improving methods of astronomical, time determination than with the singular innovation of the telegraph, thus emphasizing the importance of what have been described as 'observatory techniques' to nineteenth-century practices of precision measurement.

  8. Effects on traffic of a magnetic levitation system Frankfurt -96 Paris

    Energy Technology Data Exchange (ETDEWEB)

    Schmitt, A; Keimel, H; Wuerdemann, G; Halten, W

    1982-01-01

    The study is based on an analysis and forecast of the volume and structure of passenger travel in the region under consideration for a situation without a Maglev system. For the case with a Maglev line Frankfurt-Paris, both the substitutional effects of this system on the travel demand of aeroplane, train and car and the newly generated traffic are estimated. As a result for 1990 a total of 6.6 million passenger trips per year on the Maglev system is expected, most of these (c. 60%) coming from original passenger train traffic. On account of feeder services to the Maglev system, demand for the existing rail system (in passenger kilometers) is diminished by only 20%. 15-20% of the total demand for the Maglev system between Frankfurt and Paris is estimated to originate from O-D-air-travel in the corridor (which is supposed to be totally substitutionable) and another 10-15% both from substituted car travel and from newly generated travel. Balances are struck for travel cost, travel time, and trip kilometers spent in the without- and with-case. Sensitivity analysis have been carried out for supply variants of the Maglev system and the classic rail system. Beside the study method there are some statements regarding inspected travel market shares which are supposed to be transferable to other planning cases.

  9. Paris, "enfer" or "paradis"? On Gérard de Nerval's "cercles inextricables"

    Directory of Open Access Journals (Sweden)

    Luca Costantin

    2015-06-01

    Full Text Available The city of Paris constituted the scenario in which Gérard de Nerval grew up both personally and artistically. He passed his life in the city and recounted his experience there, transfering to his books a true melange of the sensory and experiential. A fundamental characteristic of his writing, and, more generally, of his method of thinking about the work of writing,was that he did not write of himself or of conventional space and time, but rather he investigated a much more complex universe, composed of a spiritual and psychological space, often mysterious and subjective. The consequent reality is a constant metamorphasis that demonstrates the imprint of Nerval’s internal world, and the myths and archetypes that populate his dreams; his vision of an alternative reality. Paris changes because Nerval himself changes, both internally and along with the city: light and music in the happy years he passed in his apartment on Doyenne street in the company of his bohemian friends, and darkness and claustrophobia in the pages of Aurélia, when the city described by Gerard was full of insurmountable anxiety and muted solitude.

  10. Sound quality indicators for urban places in Paris cross-validated by Milan data.

    Science.gov (United States)

    Ricciardi, Paola; Delaitre, Pauline; Lavandier, Catherine; Torchia, Francesca; Aumond, Pierre

    2015-10-01

    A specific smartphone application was developed to collect perceptive and acoustic data in Paris. About 3400 questionnaires were analyzed, regarding the global sound environment characterization, the perceived loudness of some emergent sources and the presence time ratio of sources that do not emerge from the background. Sound pressure level was recorded each second from the mobile phone's microphone during a 10-min period. The aim of this study is to propose indicators of urban sound quality based on linear regressions with perceptive variables. A cross validation of the quality models extracted from Paris data was carried out by conducting the same survey in Milan. The proposed sound quality general model is correlated with the real perceived sound quality (72%). Another model without visual amenity and familiarity is 58% correlated with perceived sound quality. In order to improve the sound quality indicator, a site classification was performed by Kohonen's Artificial Neural Network algorithm, and seven specific class models were developed. These specific models attribute more importance on source events and are slightly closer to the individual data than the global model. In general, the Parisian models underestimate the sound quality of Milan environments assessed by Italian people.

  11. The tragedy of global warming: From the fifth IPCC report to the 2015 Paris Climate Conference

    International Nuclear Information System (INIS)

    Auverlot, Dominique

    2015-01-01

    Reports by the Intergovernmental Panel on Climate Change (IPCC) always signal a new step in the fight against climate change. The first report, in 1990, led to the adoption of the UN Framework Convention on Climate Change during the 1992 Earth Summit in Rio de Janeiro. The second one, released in 1996, prepared the way for the 1997 Kyoto Protocol. The third, in 2000, emphasized 'adaptation', an idea taken up during subsequent negotiations. The fourth report in 2007 made a step toward setting at 2 deg. C the maximum increase in temperature and opened the way to the non-binding Copenhagen Accord and then to Cancun. What consequences will the fifth IPCC report of October 2014 have? Will it help finalize the Paris agreement? Or will it be considered to be one report too many - repeating what has oft been stated over the last twenty years? Before replying, the major points raised in this report are discussed; and questions, asked about some of the conclusions. Lessons are drawn for the worldwide agreement on the table in Paris

  12. Sinemurian–Pliensbachian calcareous nannofossil biostratigraphy and organic carbon isotope stratigraphy in the Paris Basin

    DEFF Research Database (Denmark)

    Peti, Leonie; Thibault, Nicolas Rudolph; Clemence, Marie-Emilie

    2017-01-01

    The biostratigraphy of Sinemurian to lower Toarcian calcareous nannofossils has been investigated in the Sancerre-Couy core (Paris Basin), which contains a mixed assemblage of species with affinities to the northern and southern areas of the peri-tethyan realm, thus allowing for the use and calib......The biostratigraphy of Sinemurian to lower Toarcian calcareous nannofossils has been investigated in the Sancerre-Couy core (Paris Basin), which contains a mixed assemblage of species with affinities to the northern and southern areas of the peri-tethyan realm, thus allowing for the use...... organic carbon isotope curve based on 385 data points. The main bioevents, i.e. the first occurrences of Parhabdolithus liasicus, Crepidolithus pliensbachensis, Crepidolithus crassus, Mitrolithus lenticularis, Similiscutum cruciulus sensu lato, Lotharingius hauffii, Crepidolithus cavus and Lotharingius...... between the different domains. In addition to the nine main bioevents used for the biozonation of the core, we document an additional 50 distinct bioevents, evaluate their reliability and discuss their potential significance by comparison to previous studies. A total of five significant negative organic...

  13. Relative humidity impact on aerosol parameters in a Paris suburban area

    Directory of Open Access Journals (Sweden)

    H. Randriamiarisoa

    2006-01-01

    Full Text Available Measurements of relative humidity (RH and aerosol parameters (scattering cross section, size distributions and chemical composition, performed in ambient atmospheric conditions, have been used to study the influence of relative humidity on aerosol properties. The data were acquired in a suburban area south of Paris, between 18 and 24 July 2000, in the framework of the 'Etude et Simulation de la Qualité de l'air en Ile-de-France' (ESQUIF program. According to the origin of the air masses arriving over the Paris area, the aerosol hygroscopicity is more or less pronounced. The aerosol chemical composition data were used as input of a thermodynamic model to simulate the variation of the aerosol water mass content with ambient RH and to determine the main inorganic salt compounds. The coupling of observations and modelling reveals the presence of deliquescence processes with hysteresis phenomenon in the hygroscopic growth cycle. Based on the Hänel model, parameterisations of the scattering cross section, the modal radius of the accumulation mode of the size distribution and the aerosol water mass content, as a function of increasing RH, have been assessed. For the first time, a crosscheck of these parameterisations has been performed and shows that the hygroscopic behaviour of the accumulation mode can be coherently characterized by combined optical, size distribution and chemical measurements.

  14. On the inter relationship between fatigue crack growth parameters in Paris regime

    International Nuclear Information System (INIS)

    Sasikala, G.

    2016-01-01

    Studies on fatigue crack growth behaviour of several steels and their welds for nuclear applications have been characterized in the author's laboratory in the past decade as a part of (i) creating the required database for integrity assessment of components, (ii) providing inputs for materials development, and (iii) understanding the crack growth behaviour in the light of basic mechanisms of cyclic deformation and damage. These include, effects of test variables (such as temperature, load ratio R) and material conditions (such as base and weld materials in as received, as welded or after subjecting to different ageing conditions). Different steels investigated include the ferritic grades modified 9Cr-1Mo steel (P91) and reduced activation ferritic martensitic steel, and austenitic grade SS 316L(N) and its weld. A common observation in the FCG literature is the inverse relationship between the Paris constant (log C) and exponent m, which has attracted considerable attention of the researchers in the field. The present paper attempts a fresh look at the inter relationship between Paris parameters obtained in the FCG studies on the above materials including the effect of crack closure and crack tip shielding. Further, some observed deviations from the inter relationship will be discussed in the light of changes in material properties and crack growth mechanisms. (author)

  15. Global justice and environmental governance: an analysis of the Paris Agreement

    Directory of Open Access Journals (Sweden)

    Marcelo Santos

    Full Text Available Abstract Based on the major normative political theory contributions on global climate justice, the present paper analyzes the new international agreement on climate change, adopted at COP 21 in Paris (2015. Therefore, a literary review of the extensive normative theoretical discussion about global climate justice is made, with special attention to the two approaches that have permeated multilateral political negotiations - historical responsibility and equal per capita emissions. From this normative discussion, this paper recalls the global climate change negotiation process, focusing on the Kyoto Protocol. Next, the analysis emphasizes on the Paris Agreement in an effort to evaluate the normative questions on justice and equity within the environmental governance regime. Finally, the set of conclusions indicates that, although the flexibility of the Agreement has encompassed some dimensions of responsibility, necessity and ability to bear the costs, the most complex dimensions of justice and equity has not been completely solved, which may hinder the operation of environmental governance in a near future.

  16. Paris Saponin I Sensitizes Gastric Cancer Cell Lines to Cisplatin via Cell Cycle Arrest and Apoptosis.

    Science.gov (United States)

    Song, Shuichuan; Du, Leiwen; Jiang, Hao; Zhu, Xinhai; Li, Jinhui; Xu, Ji

    2016-10-18

    BACKGROUND Dose-related toxicity is the major restriction of cisplatin and cisplatin-combination chemotherapy, and is a challenge for advanced gastric cancer treatment. We explored the possibility of using Paris saponin I as an agent to sensitize gastric cancer cells to cisplatin, and examined the underlying mechanism. MATERIAL AND METHODS Growth inhibition was detected by MTT assay. The cell cycle and apoptosis were detected using flow cytometry and Annexin V/PI staining. The P21waf1/cip1, Bcl-2, Bax, and caspase-3 protein expression were detected using Western blot analysis. RESULTS The results revealed that PSI sensitized gastric cancer cells to cisplatin, with low toxicity. The IC50 value of cisplatin in SGC-7901 cell lines was decreased when combined with PSI. PSI promoted cisplatin-induced G2/M phase arrest and apoptosis in a cisplatin concentration-dependent manner. Bcl-2 protein expression decreased, but Bax, caspase-3, and P21waf1/cip1 protein expression increased with PSI treatment. CONCLUSIONS The underlying mechanism of Paris saponin I may be related to targeting the apoptosis pathway and cell cycle blocking, which suggests that PSI is a potential therapeutic sensitizer for cisplatin in treating gastric cancer.

  17. Extinction of Light during the Fog Life Cycle: a Result from the ParisFog Experiment

    International Nuclear Information System (INIS)

    Elias, T.; Haeffelin, M.; Drobinski, P.; Gomes, L.; Rangognio, J.; Bergot, T.; Chazette, P.; Raut, J.-C.; Colomb, M.

    2009-01-01

    Data set acquired by five particle-dedicated instruments set up on the SIRTA experimental site during the ParisFog field campaign are exploited to document microphysical properties of particles contributing to extinction of visible radiation in variable situations. The case study is a 48-hour period when atmospheric conditions are highly variable: relative humidity changes between 50 and 100%, visibility ranges between 35000 and 65 m, the site is either downwind Paris area either under maritime influence. A dense and homogeneous fog formed by radiative cooling during the 18-19 February night. In 7 hours, visibility decreases from 26 000 m to 65 m, because of transported pollution (factor 3 in visibility reduction), aerosol hydration (factor 20) and aerosol activation (factor 6). According to Mie theory, extinction in clear-sky polluted and unpolluted regimes is due equally to Aitken and accumulation modes. Extinction in haze is due to hydrated aerosols distributed in the accumulation mode, for diameter smaller than 2 μm. Hydrated aerosols of the accumulation mode still contribute to 20-30% extinction in the fog. Measurements show that fog droplets, with diameter included between 2 and 10 μm, contribute to 40% extinction during the first hours of the fog.

  18. U.S. withdrawal from the Paris Agreement: Reasons, impacts, and China's response

    Directory of Open Access Journals (Sweden)

    Hai-Bin Zhang

    2017-12-01

    Full Text Available Applying qualitative and quantitative methods, this article explains the driving forces behind U.S. President Donald Trump's decision to withdraw from the Paris Agreement, assesses the impacts of this withdrawal on the compliance prospects of the agreement, and proposes how China should respond. The withdrawal undercuts the foundation of global climate governance and upsets the process of climate cooperation, and the impacts are manifold. The withdrawal undermines the universality of the Paris Agreement and impairs states' confidence in climate cooperation; it aggravates the leadership deficit in addressing global climate issues and sets a bad precedent for international climate cooperation. The withdrawal reduces other countries' emission space and raises their emission costs, and refusal to contribute to climate aid makes it more difficult for developing countries to mitigate and adapt to climate change. Cutting climate research funding will compromise the quality of future IPCC reports and ultimately undermine the scientific authority of future climate negotiations. China faces mounting pressure from the international community to assume global climate leadership after the U.S. withdraws, and this article proposes that China should reach the high ends of its domestic climate targets under the current Nationally Determined Contributions; internationally, China should facilitate the rebuilding of shared climate leadership, replacing the G2 with C5. Meanwhile, China needs to keep the U.S. engaged in climate cooperation.

  19. The complete chloroplast genome of traditional Chinese medical plants Paris polyphylla var. yunnanensis.

    Science.gov (United States)

    Song, Yun; Xu, Jin; Chen, NaiZhong; Li, MingFu

    2017-03-01

    Paris polyphylla var. yunnanensis is a perennial medical plant widely used in traditional Chinese medicine. Here, we report the complete chloroplast genome of P. polyphylla var. yunnanensis. The genome is 157 675 bp in length including a small single-copy region (SSC, 18 319 bp) and a large single-copy region (LSC, 84 108 bp) separated by a pair of inverted repeats (IRs, 27 624 bp). The genome contained 115 genes, including 81 protein-coding genes, 4 ribosomal RNA genes, and 30 tRNA genes. Among these genes, 13 harbored a single intron and 2 contained a couple of introns. The overall G + C content of the cpDNA is 37.4%, while the corresponding values of the LSC, SSC, and IR regions are 35.71%, 31.43%, and 41.87%, respectively. A Maximum-likelihood phylogenetic analysis suggested that genus Trillium, Paris, Fritillaria, and Lilium were strongly supported as monophyletic and the P. polyphylla var. yunnanensis is closely related to Trillium.

  20. The Paris Convention for the prevention of marine pollution from land-based sources

    International Nuclear Information System (INIS)

    Dinkloh, L.; Braun, H.

    1983-01-01

    The Paris Convention of 1974 which entered into force at an international level in 1978 is an important instrument to protect the North Sea and the North Atlantic against pollution from land-based sources. Contracting Parties are practically all riparian states of its scope of application - 13 states on the whole - as well as the EC. There is a survey of the functions, organization and working method, the instruments and results so far achieved in the framework of the Convention. Priority was so far given to the following substances or, respectively, groups of substances: oil, mercury, cadmium, drines, PCB's and PCT's as well as titanium dioxide. In this respect, it was above all agreed on: emission and immission standards (or guide values, respectively), recommendations for measures reducing emissions and a number of obligations to report. Studies and discussions on organosilicone compounds, radioactivity, water pollution through the atmosphere and eutrophication phenomena are relatively new. The opportunities offered by the Paris Convention have not yet been fully used. (orig.) [de

  1. Evaluating BC and NOx emission inventories for the Paris region from MEGAPOLI aircraft measurements

    Science.gov (United States)

    Petetin, H.; Beekmann, M.; Colomb, A.; Denier van der Gon, H. A. C.; Dupont, J.-C.; Honoré, C.; Michoud, V.; Morille, Y.; Perrussel, O.; Schwarzenboeck, A.; Sciare, J.; Wiedensohler, A.; Zhang, Q. J.

    2015-09-01

    High uncertainties affect black carbon (BC) emissions, and, despite its important impact on air pollution and climate, very few BC emissions evaluations are found in the literature. This paper presents a novel approach, based on airborne measurements across the Paris, France, plume, developed in order to evaluate BC and NOx emissions at the scale of a whole agglomeration. The methodology consists in integrating, for each transect, across the plume observed and simulated concentrations above background. This allows for several error sources (e.g., representativeness, chemistry, plume lateral dispersion) to be minimized in the model used. The procedure is applied with the CHIMERE chemistry-transport model to three inventories - the EMEP inventory and the so-called TNO and TNO-MP inventories - over the month of July 2009. Various systematic uncertainty sources both in the model (e.g., boundary layer height, vertical mixing, deposition) and in observations (e.g., BC nature) are discussed and quantified, notably through sensitivity tests. Large uncertainty values are determined in our results, which limits the usefulness of the method to rather strongly erroneous emission inventories. A statistically significant (but moderate) overestimation is obtained for the TNO BC emissions and the EMEP and TNO-MP NOx emissions, as well as for the BC / NOx emission ratio in TNO-MP. The benefit of the airborne approach is discussed through a comparison with the BC / NOx ratio at a ground site in Paris, which additionally suggests a spatially heterogeneous error in BC emissions over the agglomeration.

  2. [Management of wheezing disorders in infants participating in the PARIS birth cohort].

    Science.gov (United States)

    Herr, M; Nikasinovic, L; Foucault, C; Le Marec, A M; Giordanella, J P; Just, J; Momas, I

    2012-01-01

    While wheezing disorders are common in preschool children, their management is not well defined. The aim of this study was to assess the use of medical health care resources due to wheezing disorders in infants aged 18 months followed up in the Pollution and Asthma Risk: an Infant Study (PARIS) birth cohort. Data on wheezing disorders, medical visits and medication on account of respiratory disorders during the previous 12 months were collected with a standardized questionnaire, administered by a paediatrician, during the health check offered to every child aged 18 months included in the PARIS birth cohort. The prevalence of wheezing disorders during the past 12 months amounted to 560/1974 (28.4%). Among wheezers, 493 (89.3%) required a medical visit because of difficult breathing; 61 (11.0%) went to the emergency room, 35 (6.4%) were admitted to the hospital and 375 (67.2%) received an inhaled anti-asthmatic medication. Recourse to chest physiotherapy was reported in 472 of them (85.1%). This study confirms the high use of healthcare resources because of wheezing disorders in infants and suggests a higher use of anti-asthmatic medications in France compared to other European countries. Copyright © 2011 SPLF. Published by Elsevier Masson SAS. All rights reserved.

  3. The amino acid and hydrocarbon contents of the Paris meteorite: Insights into the most primitive CM chondrite

    Science.gov (United States)

    Martins, Zita; Modica, Paola; Zanda, Brigitte; D'Hendecourt, Louis Le Sergeant

    2015-05-01

    The Paris meteorite is one of the most primitive carbonaceous chondrites. It is reported to be the least aqueously altered CM chondrite, and to have experienced only weak thermal metamorphism. We have analyzed for the first time the amino acid and hydrocarbon contents of this pristine meteorite by gas chromatography-mass spectrometry (GC-MS). When plotting the relative amino acids abundances of several CM chondrites according to the increasing hydrothermal scale (petrologic subtypes), from the CM2.7/2.8 Paris to the CM2.0 MET 01070, Paris has the lowest relative abundance of β-alanine/glycine (0.15), which fits with the relative abundances of β-alanine/glycine increasing with increasing aqueous alteration for CM chondrites. These results confirm the influence of aqueous alteration on the amino acid abundances and distribution. The amino acid analysis shows that the isovaline detected in this meteorite is racemic (D/L = 0.99 ± 0.08; L-enantiomer excess = 0.35 ± 0.5%; corrected D/L = 1.03; corrected L-enantiomer excess = -1.4 ± 2.6%). The identified hydrocarbons show that Paris has n-alkanes ranging from C16 to C25 and 3- to 5-ring nonalkylated polycyclic aromatic hydrocarbons (PAHs). The lack of alkylated PAHs in Paris seems to be also related to this low degree of aqueous alteration on its parent body. The extraterrestrial hydrocarbon content, suggested by the absence of any biomarker, may well have a presolar origin. The chemistry of the Paris meteorite may thus be closely related to the early stages of the solar nebula with a contribution from interstellar (molecular cloud) precursors.

  4. Discrimination of Wild Paris Based on Near Infrared Spectroscopy and High Performance Liquid Chromatography Combined with Multivariate Analysis

    Science.gov (United States)

    Zhao, Yanli; Zhang, Ji; Yuan, Tianjun; Shen, Tao; Li, Wei; Yang, Shihua; Hou, Ying; Wang, Yuanzhong; Jin, Hang

    2014-01-01

    Different geographical origins and species of Paris obtained from southwestern China were discriminated by near infrared (NIR) spectroscopy and high performance liquid chromatography (HPLC) combined with multivariate analysis. The NIR parameter settings were scanning (64 times), resolution (4 cm−1), scanning range (10000 cm−1∼4000 cm−1) and parallel collection (3 times). NIR spectrum was optimized by TQ 8.6 software, and the ranges 7455∼6852 cm−1 and 5973∼4007 cm−1 were selected according to the spectrum standard deviation. The contents of polyphyllin I, polyphyllin II, polyphyllin VI, and polyphyllin VII and total steroid saponins were detected by HPLC. The contents of chemical components data matrix and spectrum data matrix were integrated and analyzed by partial least squares discriminant analysis (PLS-DA). From the PLS-DA model of NIR spectrum, Paris samples were separated into three groups according to the different geographical origins. The R2X and Q2Y described accumulative contribution rates were 99.50% and 94.03% of the total variance, respectively. The PLS-DA model according to 12 species of Paris described 99.62% of the variation in X and predicted 95.23% in Y. The results of the contents of chemical components described differences among collections quantitatively. A multivariate statistical model of PLS-DA showed geographical origins of Paris had a much greater influence on Paris compared with species. NIR and HPLC combined with multivariate analysis could discriminate different geographical origins and different species. The quality of Paris showed regional dependence. PMID:24558477

  5. ‘Images of Globalisation: Paris 1889’. Review of Beat Wyss, Bilder von der Globalisierung. Die Weltausstellung von Paris 1889. Berlin: Insel Verlag, 2010

    Directory of Open Access Journals (Sweden)

    Matthew Rampley

    2013-12-01

    Full Text Available This review analyses the study of the Paris World’s Fair of 1889 by Beat Wyss. It considers the strengths and weaknesses of Wyss’s interpretation, but also examines it in the larger context of literature on world fairs. It argues that Wyss’s book exemplifies a common pattern in scholarly studies of world fairs during the nineteenth century, namely, a tendency to focus on their function as forms of cultural representation, i.e. their role in advancing specific notions of regional, national and imperial identity. The review does not dispute that this was a central aspect of the world fairs, but it also points towards the omissions in such studies. Not only were the world fairs founded as a means of promoting liberal ideas of free trade, they were also used to display the latest technologies in a wide array of activities, such as industrial manufacturing, forestry and farming. These subjects are almost never examined in any depth in the literature on world fairs, the result of a partial and limited approach to world fairs. The review argues that for all its strengths, Wyss’s book exemplifies this approach.

  6. Effect of current and speed on porosity in autogenous Tungsten Inert Gas (TIG) welding of aluminum alloys A1100 butt joint

    Science.gov (United States)

    Milyardi, Indra; Sunar Baskoro, Ario

    2018-04-01

    Autogenous Tungsten Inert Gas (TIG) welding has been conducted on aluminum alloy A1100. The purpose of this research is to determine the proper current and speed of autogenous TIG welding with butt joint pattern. Variations on welding current are 150 A, 155 A, and 160 A with the variations on welding speed are 1 mm/seconds, 1.1 mm/seconds, 1.2 mm/seconds. The welded results were tested using non-destructive test (NDT) method using X-Ray radiography. After the test, it is found that the appropriate current for the best result without porosity can be achieved using the welding parameter of welding current of 160 A and the welding speed of 1.1 mm seconds.

  7. Influences of post weld heat treatment on tensile strength and microstructure characteristics of friction stir welded butt joints of AA2014-T6 aluminum alloy

    Science.gov (United States)

    Rajendran, C.; Srinivasan, K.; Balasubramanian, V.; Balaji, H.; Selvaraj, P.

    2016-08-01

    Friction stir welded (FSWed) joints of aluminum alloys exhibited a hardness drop in both the advancing side (AS) and retreating side (RS) of the thermo-mechanically affected zone (TMAZ) due to the thermal cycle involved in the FSW process. In this investigation, an attempt has been made to overcome this problem by post weld heat treatment (PWHT) methods. FSW butt (FSWB) joints of Al-Cu (AA2014-T6) alloy were PWHT by two methods such as simple artificial aging (AA) and solution treatment followed by artificial aging (STA). Of these two treatments, STA was found to be more beneficial than the simple aging treatment to improve the tensile properties of the FSW joints of AA2014 aluminum alloy.

  8. Experimental and analytical study of the DC breakdown characteristics of polypropylene laminated paper with a butt gap condition considering the insulation design of superconducting cable

    Science.gov (United States)

    Seo, In-jin; Choi, Won; Seong, Jae-gyu; Lee, Bang-wook; Koo, Ja-yoon

    2014-08-01

    It has been reported that the insulation design under DC stress is considered as one of the critical factors in determining the performance of high-voltage direct current (HVDC) superconducting cable. Therefore, it is fundamentally necessary to investigate the DC breakdown characteristics of the composite insulation system consisting of liquid nitrogen (LN2)/polypropylene-laminated-paper (PPLP). In particular, the insulation characteristics under DC polarity reversal condition should be verified to understand the polarity effect of the DC voltage considering the unexpected incidents taking place at line-commutated-converters (LCC) under service at a DC power grid. In this study, to examine the variation of DC electric field strength, the step voltage and polarity reversal breakdown tests are performed under DC stress. Also, we investigate the electric field distributions in a butt gap of the LN2/PPLP condition considering the DC polarity reversal by using simulation software.

  9. Optimization of GMAW process of AA 6063-T5 aluminum alloy butt joints based on the response surface methodology and on the bead geometry

    International Nuclear Information System (INIS)

    Miguel, V.; Martinez-Conesa, E. J.; Segura, F.; Manjabacas, M. C.; Abellan, E.

    2012-01-01

    The geometry of the weld beads is characterized by the overhead, the width and the penetration. These values are indices of the behavior of the welded joint and therefore, they can be considered as factors that control the process. This work is performed to optimize the GMAW process of the aluminum alloy AA 6063-T5 by means of the response surface methodology (RSM). The variables herein considered are the arc voltage, the welding speed, the wire feed speed and the separation between surfaces in butt joints. The response functions that are herein studied are the overhead, the width, the penetration and the angle of the bead. The obtained results by RSM show high grade of agreement with the experimental values. The procedure is experimentally validated by welding for the theoretically obtained optimized technological conditions and a wide agreement between theoretical and experimental values is found. (Author) 16 refs.

  10. Field performance of wood-burning and coal-burning appliances in Crested Butte during the 1989-90 heating season. Final report

    International Nuclear Information System (INIS)

    Jaasma, D.R.; Champion, M.R.; Gundappa, M.

    1991-10-01

    The field performance of woodburning and coalburning appliances in and around Crested Butte, CO, has been evaluated. Measurements included particulate matter (PM), carbon monoxide (CO), and weekly average burn rates. Woodburning appliances included conventional airtight stoves, EPA-certified catalytic stoves, and EPA-certified noncatalytic stoves. Compared to the emissions measured from conventional stoves, the certified stoves reduced PM emission factors (g/kg) by 53% and CO emission factors by 49%. Coalburning appliances included a commercial scale boiler, a residential stoker, and hand-fired coalstove. The coalburning appliances were compared to conventional woodstoves on a grams of pollutant per joule of heat output basis. The automatically stoked coal appliances reduced PM and CO emissions by roughly 84% and 85%, respectively. The hand-fired stove was cleaner than expected, reducing PM by 55% and CO by 27%

  11. Deuteron form factors and e-d polarization observables for the Paris and Graz-II potentials

    International Nuclear Information System (INIS)

    Schwarz, K.; Plessas, W.; Mathelitsch, L.

    1983-01-01

    Elastic e-d scattering is studied employing the meson-theoretical Paris potential and the non-local separable Graz-II potential. Electric and magnetic form factors are calculated with inclusion of meson-exchange currents and compared to existing experimental data. Deuteron vector and tensor polarizations are predicted and discussed in relation to the deuteron wave functions of the potential models considered. Thereby the off-shell behaviour of the Graz-II interaction is found to be close to that one of the Paris potential over the most important domain of low and moderate off-shell moments. (Author)

  12. A separable approximation of the NN-Paris-potential in the framework of the Bethe-Salpeter equation

    International Nuclear Information System (INIS)

    Schwarz, K.; Haidenbauer, J.; Froehlich, J.

    1985-09-01

    The Bethe-Salpeter equation is solved with a separable kernel for the most important nucleon-nucleon partial wave states. We employ the Ernst Shakin-Thaler method in the framework of minimal relativity (Blankenbeckler-Sugar equation) to generate a separable representation of the meson-theoretical Paris potential. These separable interactions, which closely approximate the on-shell- and half-off-shell behaviour of the Paris potential, are then cast into a covariant form for application in the Bethe-Salpeter equation. The role of relativistic effects is discussed with respect to on-shell and off-shell properties of the NN-system. (Author)

  13. On the constitutive law of environment assisted fatigue: The physical meaning of the Paris type equations. Pt. 1

    International Nuclear Information System (INIS)

    Krausz, K.; Wu Xijia; Krausz, A.S.; Lian Zhiwen

    1992-01-01

    Environment assisted fatigue crack growth is a complex of thermally activated processes. Accordingly, the framework for the expression of rational constitutive law is developed from fracture kinetics theory. The correlation of the constitutive law with the Paris equation is discussed and the empirical parameters in the Paris equation are expressed explicitly in terms of activation energy, stress intensity factor range, temperature, stress ratio, and other physically rigorous engineering quantities. The theory assures and facilitates, the rigorous quantitative evaluation of the effects of the microstructure: the constitutive law gives guidance to its measurement and expresses it in terms of energy-related quantities. (orig.) [de

  14. Busted Butte Unsaturated Zone Transport Test: Fiscal Year 1998 Status Report Yucca Mountain Site Characterization Program Deliverable SPU85M4

    International Nuclear Information System (INIS)

    Bussod, G.Y.; Turin, H.J.; Lowry, W.E.

    1999-01-01

    This report describes the status of the Busted Butte Unsaturated Zone Transport Test (UZTT) and documents the progress of construction activities and site and laboratory characterization activities undertaken in fiscal year 1998. Also presented are predictive flow-and-transport simulations for Test Phases 1 and 2 of testing and the preliminary results and status of these test phases. Future anticipated results obtained from unsaturated-zone (UZ) transport testing in the Calico Hills Formation at Busted Butte are also discussed in view of their importance to performance assessment (PA) needs to build confidence in and reduce the uncertainty of site-scale flow-and-transport models and their abstractions for performance for license application. The principal objectives of the test are to address uncertainties associated with flow and transport in the UZ site-process models for Yucca Mountain, as identified by the PA working group in February 1997. These include but are not restricted to: (1) The effect of heterogeneities on flow and transport in unsaturated and partially saturated conditions in the Calico Hills Formation. In particular, the test aims to address issues relevant to fracture-matrix interactions and permeability contrast boundaries; (2) The migration behavior of colloids in fractured and unfractured Calico Hills rocks; (3) The validation through field testing of laboratory sorption experiments in unsaturated Calico Hills rocks; (4) The evaluation of the 3-D site-scale flow-and-transport process model (i.e., equivalent-continuum/dual-permeability/discrete-fracture-fault representations of flow and transport) used in the PA abstractions for license application; and (5) The effect of scaling from lab scale to field scale and site scale

  15. H.J. Bhabha: A case study of synchronous references

    International Nuclear Information System (INIS)

    Swarna, T.; Kalyane, V.L.; Prakasan, E.R.; Kumar, V.

    2006-01-01

    Quantitative analysis of the events of synchronous references in the research papers followed throughout the publishing career of an individual scientist revealed interesting highlights on the knowledge-generating-system. In the case study of Homi Jehangir Bhabha, the first quinquennium and fifth quinquennium of his research career had low self-references; the third quinquennium and the fourth quinquennium had moderate self-references; whereas the second quinquennium had the highest number of self-references. The two major clusters of self-references occurring during the second and third quinquenniums were indicators of active periods of knowledge-generating and faster communications. (author)

  16. Experimental and theoretical study of the atmospheric boundary layer over the paris area; Etude experimentale et theorique de la couche limite atmospherique en agglomeration parisienne

    Energy Technology Data Exchange (ETDEWEB)

    Menut, L

    1997-12-15

    This thesis studied the urban boundary layer dynamic behaviour over the Paris area by comparing urban (Paris) and suburban (Palaiseau) dynamic data such as lidars, sodars, sonic anemometers. All the data were obtained during the ECLAP experiment, specifically performed to characterize the differences between a city and its near environment. (author)

  17. The Politics of Deception and the French Lais in the Roman de Fauvel, Manuscript Paris, Bibliothèque nationale de France, fonds français 146

    NARCIS (Netherlands)

    Marinescu, R.C.I.

    2014-01-01

    The interpolated version of the French allegorical satire, the Roman de Fauvel, transmitted in manuscript Paris, Bibliothèque nationale de France, fonds français 146 (produced in Paris ca. 1317), targets the corruption within the French royal court in the last years of the rule of King Philip IV of

  18. Negative Emissions Technologies, the Paris Agreement, and the Need for a Human-Rights Based Approach

    Science.gov (United States)

    Burns, W. C. G.

    2016-12-01

    The new Paris Agreement under the United Nations Framework Convention on Climate Change contemplates that its prospective Parties will balance emissions and sinks by 2050 as a means to effectuate the goal of holding temperature increases to well below 2°C from pre-industrial levels, as well as the more aspirational goal of holding temperature increases to 1.5°C. Most of the IPCC's AR5 scenarios that achieve these objectives contemplate the large-scale deployment of so-called "negative emissions technologies," with an emphasis on bioenergy and carbon capture and storage (BECCS), and to a lesser degree afforestation. BECCS could assuredly help society avoid passing critical climatic thresholds, or address overshoot scenarios in this century and beyond. However, it could also profound implications for food production, the status of forests, access to lands for livelihoods by vulnerable populations, and the integrity of critical ecosystems. This, in turn could have serious ramifications for human rights of some of the world's most vulnerable populations, including the rights to food, water, livelihoods and the benefits of biodiversity. The Preamble to the Paris Agreement acknowledges the need to take into consideration the potential impact of responses to climate change, providing that "Parties should, when taking action to address climate change, respect, promote and consider their respective obligations on human rights." This presentation will outline how application of a human rights-based approach to assessing such options could help to reconcile the objectives of ameliorating potential climatic impacts while protecting the human rights of potentially affected individuals and groups. This will include the potential role of Human Rights Impacts Assessments and potential configuration of HRIAs at the national and international level. It will also briefly suggest how to operationalize this approach within the Paris Agreement framework, including institutional

  19. Volatile and intermediate volatility organic compounds in suburban Paris: variability, origin and importance for SOA formation

    International Nuclear Information System (INIS)

    Ait-Helal, W.; Borbon, A.; Beekmann, M.; Doussin, J.F.; Durand-Jolibois, R.; Grand, N.; Michoud, V.; Miet, K.; Perrier, S.; Siour, G.; Zapf, P.; Sauvage, S.; Fronval, I.; Leonardis, T.; Locoge, N.; Gouw, J.A. de; Colomb, A.; Gros, V.; Lopez, M.

    2014-01-01

    Measurements of gaseous and particulate organic carbon were performed during the MEGAPOLI experiments, in July 2009 and January-February 2010, at the SIRTA observatory in suburban Paris. Measurements comprise primary and secondary volatile organic compounds (VOCs), of both anthropogenic and biogenic origins, including C12-C16 n-alkanes of intermediate volatility (IVOCs), suspected to be efficient precursors of secondary organic aerosol (SOA). The time series of gaseous carbon are generally consistent with times series of particulate organic carbon at regional scale, and are clearly affected by meteorology and air mass origin. Concentration levels of anthropogenic VOCs in urban and suburban Paris were surprisingly low (2-963 ppt) compared to other mega-cities worldwide and to rural continental sites. Urban enhancement ratios of anthropogenic VOC pairs agree well between the urban and suburban Paris sites, showing the regional extent of anthropogenic sources of similar composition. Contrary to other primary anthropogenic VOCs (aromatics and alkanes), IVOCs showed lower concentrations in winter (≤ 5 ppt) compared to summer (13-27 ppt), which cannot be explained by the gas-particle partitioning theory. Higher concentrations of most oxygenated VOCs in winter (18-5984 ppt) suggest their dominant primary anthropogenic origin. The respective role of primary anthropogenic gaseous compounds in regional SOA formation was investigated by estimating the SOA mass concentration expected from the anthropogenic VOCs and IVOCs (I/VOCs) measured at SIRTA. From an integrated approach based on emission ratios and SOA yields, 38% of the SOA measured at SIRTA is explained by the measured concentrations of I/VOCs, with a 2% contribution by C12-C16 n-alkane IVOCs. From the results of an alternative time-resolved approach, the average IVOC contribution to SOA formation is estimated to be 7 %, which is half of the average contribution of the traditional aromatic compounds (15 %). Both

  20. Urban dew and rain in Paris, France: Occurrence and physico-chemical characteristics

    Science.gov (United States)

    Beysens, D.; Mongruel, A.; Acker, K.

    2017-06-01

    This paper summarizes one year (April 2011 to March 2012) measurements on planar condensing surfaces of dew and rain events and related physico-chemical characteristics in the urban environment of Paris (city center). Yearly collected water was 3.48 mm for dew (63 events) and 593 mm for rain (146 events). The latter value compares well with rain data (547 mm and 107 events) collected within 12 km at Paris-Orly airport. An estimation of dew yield based on meteo data gives 2.35 mm and 74 events, to be compared with 17.11 mm and 196 events at Paris-Orly. These differences highlight the large reduction in dew events and dew yields in an urban area as compared to a close rural-like area. This reduction is not due to a sky view reduction but to heat island that increases air temperature and decreases relative humidity. Analysis of dew (34) and rain (77) samples were done concerning pH, electrical conductivity (EC), major anions and cations as well as selected trace metals and other minor ions. Mean pH values are found similar for both, dew (6.5) and rain (6.1), rain being slightly more acidic than dew. The mean dew total ionic content (TIC 1.8 meq/l) and EC value (124 μS/cm) are about four times that of rain (0.45 meq/l; 35 μS/cm), meaning that total dissolved solids in dew is nearly four times that in rain. Sulfate and nitrate are the most acidifying components, calcium the most neutralizing constituent with ratio of mean total acidity/total alkalinity comparable for dew and rain ( 0.9). Sulfate and nitrate have mainly anthropogenic sources, whereas chloride and magnesium are mostly connected with marine air masses. Dew is a considerable factor of wet deposition of pollutants; dew and rain ion concentrations, however, meet the WHO requirements for drinking water.

  1. The OCAPI collaborative platform: study of two particle pollution episodes in 2016 in Paris

    Science.gov (United States)

    Foret, Gilles; Michoud, Vincent; Formenti, Paola; Gratien, Aline; Beekmann, Matthias; Peinado, Florian; Favez, Olivier; Haeffelin, Martial; Dupont, Jean-Charles; Bodichon, Renaud; Gros, Valérie; Ghersi, Véronique; Meleux, Frédérik; Xuéref-Rémy, Irène

    2017-04-01

    Air pollution and its impacts are subject to an expanded interest since the middle of the 20th century, especially in urban areas which gathered an important part of emission sources. These polluted urban air masses are composed by a complex mixture of gases and aerosols coming from various emission sources (vehicular traffic, industries, residential heating, agricultural activities, natural sources) or chemical processes. To efficiently reduce this pollution and its impacts on population, it is important to understand its drivers, its sources and its impact on human health. To get some insights in Paris air pollution, a collaborative measurement platform called OCAPI ("Observation de la Composition Atmosphérique Parisienne de l'IPSL") has been built and implies several Parisian research laboratories of IPSL institute (CEREA, LSCE, LMD, LISA, LATMOS, LERMA and METIS) as well as public agencies and institutes in charge of Paris air pollution monitoring (AIRPARIF, INERIS). OCAPI platform aims at gathering skills and instruments of these laboratories to measure the composition and dynamics of Paris atmosphere. In this framework, multi-site measurements were performed during two intense particle pollution episodes which occurred in March 2016 and between November and December 2016. These two episodes were characterized by different meteorological conditions and different type of emission sources. Indeed, March episode was related to intense agricultural activities and high ammonium nitrate contribution to aerosol composition; while end of year episode was related to low wind speed, cold conditions and thin boundary layer which favoured the stagnation of locally emitted pollutants. This latter episode was characterized by large contribution of organics in aerosol composition. In this presentation, a study of these two episodes will be presented. We will first present the context and the OCAPI platform. Then, first results of dynamics and aerosol composition

  2. Paris in the spring: A review of the trade, conservation and opportunities in the shift from wild harvest to cultivation of Paris polyphylla (Trilliaceae).

    Science.gov (United States)

    Cunningham, A B; Brinckmann, J A; Bi, Y-F; Pei, S-J; Schippmann, U; Luo, P

    2018-08-10

    P. polyphylla Smith is used in traditional medicine in China, India and Nepal and is likely to be similarly used through most of its geographic range. China is at the centre of demand for P. polyphylla where it is used as an ingredient in several very successful Chinese medicinal herbal formulations. The Chinese e-commerce platform 'alibaba.com', for example, lists 97 P. polyphylla items offered by 46 Asian suppliers, of which 21 are situated in the Chinese mainland, 12 in Nepal, 7 in India, 2 in Pakistan, and 1 each in Bhutan, Hong Kong, Thailand, and Vietnam. Products offered include the crude drug (dried whole or cut rhizomes), extracts and formulations containing this herbal drug. The aims of this review were to assess the scale of the P. polyphylla trade, reviewing evidence on the impacts of wild harvest on P. polyphylla populations and on the role of cultivation as an alternative to wild harvest. Firstly, we reviewed published information on Paris population biology and studies on impacts of wild P. polyphylla harvest from across the geographic range of this species. Secondly, global trade data for P. polyphylla were analysed. Thirdly, we reviewed published information on P. polyphylla cultivation and made field visits to P. polyphylla cultivation areas in Yunnan and Sichuan. Since the 1980s, there has been a 400-fold increase in the market price paid in China for P. polyphylla rhizomes, from 2.7 Chinese Yuan (CNY) per kg in the 1980s to market prices up to 1100 CNY per kg in 2017. Cross-border trade in dried P. polyphylla rhizomes occurs at three different scales. Firstly, an internal, national trade of P. polyphylla rhizomes within countries (such as India, Nepal and China). Secondly, trade in P. polyphylla rhizomes from Nepal (and possibly from Bhutan) to the two range states that have the largest traditional medicine trade in the world: China and India. Thirdly, trade in processed herbal products. In China, for example, P. polyphylla is widely used as

  3. The indissociable unity of psyche and soma: a view from the Paris Psychosomatic School.

    Science.gov (United States)

    Aisenstein, Marilia

    2006-06-01

    Depending on whether or not psyche/soma is seen as singular or dual, one may construct different systems explaining man and the world, life and death. In the author's view, the discoveries of psychoanalysis offer a perfectly cogent and unique solution to the famous mind/body problem. In transferring the duality psyche/soma on to the duality of drives, psychoanalysis places the origin of the thought process in the body. In Beyond the pleasure principle, Freud discusses the drastic effect of a painful somatic illness on the distribution and modalities of the libido. He provides a starting point for the Paris Psychosomatic School's psychoanalytical approach to patients afflicted with somatic illnesses. To illustrate the technical implications of this theory the author relates two clinical cases.

  4. Insurance considerations arising from the revision of the Paris and Brussels conventions on nuclear liability

    International Nuclear Information System (INIS)

    Warren, G. C.

    2000-01-01

    The work being undertaken by the 14 countries, party to the 1960 Paris Convention in preparing a revised instrument will or so it is to be hoped provide a more comprehensive scope of liability and a larger compensatory fund for the protection of potential victims. Both these developments have serious implications for insurers or other providers of financial security. Equally they are of concern to society itself as it will be necessary to balance the needs of the individual for example, in obtaining redress for injury or damage to personal property with the need to provide for the ''common good''. The author's paper will attempt to explore these avenues, to point to perceived difficulties and, perhaps, to acceptable solutions. (author)

  5. Powszechna Wystawa Światowa w Paryżu w 1900 roku. Splendory Trzeciej Republiki

    OpenAIRE

    Jedlińska, Eleonora

    2015-01-01

    Publikacja Eleonory Jedlińskiej „Powszechna Wystawa Światowa w Paryżu w 1900 roku. Splendory Trzeciej Republiki” to obszerna monografia jednej z najważniejszych wystaw światowych schyłku XIX w., prowadzących w wiek XX. Dziewiętnastowieczne wystawy, swoisty fenomen cywilizacji europejskiej, służyły głównie pokazaniu osiągnięć nauki i jej zastosowań w przemyśle, choć ważnym ich elementem były dzieła sztuki, traktowane jako wyraz syntezy materii i ducha nowych czasów. Eksponowały osiągnięcia te...

  6. [An artist at the Medical School of Paris: Isabelle Pinson (1769-1855)].

    Science.gov (United States)

    Boulinier, G

    1997-01-01

    Born in Paris in 1769, Isabelle Proteau, the future Mrs. Pinson, was the daughter of a couple of servants of a famous family: her father was the footman of the marquis de Jaucourt, and her mother, the maid of Isabelle, both brother and sister of the encyclopedist Louis de Jaucourt. She lost her father very early, but thanks to her godmother Isabelle de Jaucourt, she received a good education and could become a talented painter. Especially a portraitist, she was a pupil of the academicians Vincent (1746-1816) and Regnault (1754-1829), and participated to many exhibitions at the Louvre's Salons from 1796 to 1812. In 1792, she married the artist and anatomist André Pierre Pinson (1746-1828). Among the witnesses were the surgeon Dezoteux and the famous sculptor Houdon. ...

  7. Parameters controlling fracturing distribution: example of an Upper Jurassic marly-calcareous formation (eastern Paris Basin)

    International Nuclear Information System (INIS)

    Andre, G.; Rebours, H.; Wileveau, Y.; Proudhon, B.

    2006-01-01

    Study of fractures along a 490-m vertical section of marl/limestone alternations in the Upper Jurassic (Meuse/Haute-Marne underground research laboratory-eastern Paris Basin) reveals their organization and the different states of palaeo-stress. Type and extension of tectonic structures seem to be controlled principally by lithology and secondary by depth. Also, it appears deviations of Alpine palaeo-stresses between Kimmeridgian and Oxfordian formations. These deviations are related to the presence of marl/limestone contacts. The vertical evolution of current horizontal maximum stress shows a similar behaviour, with deviations at the walls of Callovo-Oxfordian argilites. These results allow us to point out and to discuss the impact of lithology, rheology and depth on fracturing occurrence and distribution. Furthermore, this study suggests the role of Callovo-Oxfordian as a barrier for fracture development between the limestones of Dogger and Oxfordian formations. (authors)

  8. New steroidal saponins from the rhizomes of Paris delavayi and their cytotoxicity.

    Science.gov (United States)

    Liu, Yang; Tian, Xiangrong; Hua, Dong; Cheng, Guang; Wang, Kaixing; Zhang, Lihan; Tang, Haifeng; Wang, Minchang

    2016-06-01

    Four new furostanol saponins, named padelaosides C-F (1-4), together with four known spirostanol saponins 5-8 were isolated from the rhizomes of Paris delavayi Franchet. Their structures were elucidated on the basis of extensive spectroscopic analysis and chemical evidences. The discovery of the new compounds 1-4 extended the diversity and complexity of this furostanol saponin family. The cytotoxicity of all the saponins was evaluated for their cytotoxicity against human glioblastoma U87MG and human hepatocellular carcinoma Hep-G2 cell lines. The known spirostanol saponins 7 and 8 exhibited notable cytotoxicity against the two tumor cell lines with IC50 values of 1.13 and 3.42μM, respectively, while the new furostanol saponins 3 and 4 showed moderate cytotoxicity with IC50 values of 15.28 to 16.98μM. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Measures of social segregation in the context of Warsaw, Berlin and Paris metropolitan areas

    Directory of Open Access Journals (Sweden)

    Grzegorczyk Anna

    2015-09-01

    Full Text Available Social segregation is a subject common in contemporary studies of metropolitan areas. Until recently, studies of segregation focused on the distribution of ethnic groups, immigrants, and the poor. Today, they also cover additional indicators such as demographic properties, education, and affiliation with social and professional categories, which can also serve to determine the causes of the segregation (including the self-segregation of the rich. This article aims to point out the measures of segregation that present the segregation levels in the most complete manner, along with their application in the context of three European metropolitan areas: Warsaw, Berlin, and Paris. The first part of the article is a review of the existing approaches to segregation measures, followed by the selection of research method, presentation of the analysis’ results, and evaluation of the applied methods; presenting the opportunities and limitations in research of the social segregation phenomenon.

  10. Legal nature of the crimes at Paris. Terrorism or war crimes?

    Directory of Open Access Journals (Sweden)

    Raúl F. Campusano Droguett

    2017-05-01

    Full Text Available In this text we analyse from a legal point of view, the crimes committed in Paris on November 13th of 2015 by the criminal organization ISIS. As a general perception, these acts are understood as “acts of terrorism”, witch we think it is not the best option, not only because there is not an international definition of “acts of terrorism”, but also because the definitions domestic legislation use for such kind of acts are technically wrong and usually affect the due process of law. We think, as a second option, that these acts are actually war crimes under the Rome Statute of 1998 and the Geneva Convention with their Additional Protocols, which could become an effective option under procedure law.

  11. Transposition into swiss law of the Paris convention and the Brussels supplementary convention, as amended

    International Nuclear Information System (INIS)

    Tami, R.; Daina, S.

    2004-01-01

    Apart from the considerable increase in the amounts of cover, two basic factors lie behind the Swiss government decision to propose shortly to parliament a draft revised L.R.C.N.(federal act on nuclear third party liability). These are, firstly, that the revised Paris/Brussels system still incorporates the principle of the limited liability of the operator of a nuclear installation but now contains a minimum liability amount (liability threshold) and no longer a maximum amount (liability ceiling), and secondly, that the States parties are allowed to provide in their national legislation for the unlimited liability of operators. One of the aims of ratifying the revised conventions is to enable most victims to obtain fair compensation on an egalitarian basis for damage caused by a nuclear incident, and also to join an international system for compensating nuclear damage based on solidarity between states, most of them nuclear. (N.C.)

  12. Un cinéaste antifasciste à Paris : Slatan Dudow (1934-1939)

    OpenAIRE

    Trugeon, Mélanie

    2011-01-01

    Réfugié à Paris après l’arrivée de Hitler au pouvoir en Allemagne, le metteur en scène de théâtre et cinéaste bulgare Slatan Dudow poursuit son travail militant sur scène, à la radio et sur les écrans dans la capitale française jusqu’à son expulsion en 1939-1940 où il trouve alors refuge en Suisse. À partir d’un riche fonds d’archives déposé aux Archives Nationales, inexploité à ce jour, cet article retrace les conditions et les aléas de cette activité artistique et politique, en particulier ...

  13. Prediction of Accurate Mixed Mode Fatigue Crack Growth Curves using the Paris' Law

    Science.gov (United States)

    Sajith, S.; Krishna Murthy, K. S. R.; Robi, P. S.

    2017-12-01

    Accurate information regarding crack growth times and structural strength as a function of the crack size is mandatory in damage tolerance analysis. Various equivalent stress intensity factor (SIF) models are available for prediction of mixed mode fatigue life using the Paris' law. In the present investigation these models have been compared to assess their efficacy in prediction of the life close to the experimental findings as there are no guidelines/suggestions available on selection of these models for accurate and/or conservative predictions of fatigue life. Within the limitations of availability of experimental data and currently available numerical simulation techniques, the results of present study attempts to outline models that would provide accurate and conservative life predictions.

  14. Climate change: The 2015 Paris Agreement thresholds and Mediterranean basin ecosystems.

    Science.gov (United States)

    Guiot, Joel; Cramer, Wolfgang

    2016-10-28

    The United Nations Framework Convention on Climate Change Paris Agreement of December 2015 aims to maintain the global average warming well below 2°C above the preindustrial level. In the Mediterranean basin, recent pollen-based reconstructions of climate and ecosystem variability over the past 10,000 years provide insights regarding the implications of warming thresholds for biodiversity and land-use potential. We compare scenarios of climate-driven future change in land ecosystems with reconstructed ecosystem dynamics during the past 10,000 years. Only a 1.5°C warming scenario permits ecosystems to remain within the Holocene variability. At or above 2°C of warming, climatic change will generate Mediterranean land ecosystem changes that are unmatched in the Holocene, a period characterized by recurring precipitation deficits rather than temperature anomalies. Copyright © 2016, American Association for the Advancement of Science.

  15. Obras y noticias de Paris Bordón en España

    Directory of Open Access Journals (Sweden)

    Ruiz Manero, José María

    2004-06-01

    Full Text Available Si dejamos a un lado el «Retrato de una joven» de la Colección Thyssen-Bomemisza —desde hace poco en nuestro país y creído por la crítica de su mano— las otras dos obras que hasta el momento se han relacionado en España con Paris Bordón a mi juicio no le pertenecen; se trata de un supuesto «Autorretrato» (Museo del Prado y de una «Psiquis» (Palacio de Liria, considerada por Tormo obra notable. En cuanto al supuesto «Autorretrato» (L. 104 X 76 (Fig. 1, fueron Allende-Salazar y Sánchez Cantón quienes identificaron al retratado con París Bordón basándose en el parecido que sin duda tiene con…

  16. Louis-Eugène Varlin e a Comuna de Paris (1871

    Directory of Open Access Journals (Sweden)

    João Alberto da Costa Pinto

    2011-03-01

    Full Text Available O artigo propõe uma breve notícia sobre a trajetória política de Louis-Eugène Varlin (1839 - 1871, operário francês (encadernador de livros radicado em Paris (1852 - 1871, intelectual autodidata, um dos principais organizadores da seção francesa da AIT (Associação Internacional dos Trabalhadores a partir de 1865. Personagem emblemático nas lutas sociais acontecidas no período de setembro de 1870 a maio de 1871, quando do cerco à cidade pelas tropas prussianas e depois pelas tropas do governo Thiers, motivos que o levaram à participação no Comitê Central da Guarda Nacional, assim como à organização dos comitês distritais da Comuna (março a maio de 1871.     

  17. The new nucleon-nucleon scattering data and the Paris potential predictions

    International Nuclear Information System (INIS)

    Lacombe, M.; Loiseau, B.; Vinh Mau, R.; Cote, J.; Pires, P.

    1980-11-01

    New data (cross section, polarization, Wolfenstein parameters and spin-correlations) on proton-proton and neutron-proton scattering have been recently published by different groups. These include high precision and/or original measurements covering the energy range 6 MeV < Tsub(lab)< 800 MeV. A direct comparison of these data with the values produced by the Paris NN potential for energies Tsub(lab) < 350 MeV is reported here. The agreement between theory and experiment is very satisfactory both for low and medium energies. The total chi-squared for the world NN data set for Tsub(lab) < 350 MeV is also reported and compared with those given by the Arndt et al. phase shift-analysis and by the phenomenological Reid soft-core potential

  18. An Account of the Inaugural Tessier Skull Exhibition at the University of Paris Descartes.

    Science.gov (United States)

    Dusseldorp, Joseph Richard; Firmin, Françoise

    2015-10-01

    Paul Tessier is widely regarded as the father of modern craniofacial surgery. Upon his passing in 2008, his private collection of human skulls was purchased by the French Association of Facial Surgeons to ensure the collection would remain in France. The first public exhibition of the skulls was held in the medical museum of the University of Paris Descartes in April 2014. From this collection of skulls and the imagination of Tessier an entirely new specialty was created. Modern craniofacial surgery, now is an integral part of any pediatric plastic surgery department. Cranial and facial osteotomies have also become commonplace in both traumatic and aesthetic surgery. The goals for craniofacial deformity are now a return to completely normal appearance and function, as Tessier always believed they should be.

  19. [Innovations in medical undergraduate pathology education: The Paris Descartes medicine faculty experience].

    Science.gov (United States)

    Just, Pierre-Alexandre; Verkarre, Virginie; Mansuet-Lupo, Audrey; Rabant, Marion; Daniliuc, Cristina; Radenen, Brigitte; Harent, Marion; Cassanelli, Lucien; Cherel, Éric; Javaux, Hubert; Tesniere, Antoine; Terris, Benoît; Badoual, Cécile

    2016-08-01

    At the Paris Descartes medicine faculty, we tested some newly developed tools to enhance the pedagogic value of the pathology teaching. In our faculty, this teaching is largely multidisciplinary and integrated in various teaching units; a large part is dedicated to practice works with thirteen 90min sessions. Virtual slides have been used for years in numerous medicine faculties; we successfully implemented this tool by adding contextual annotations, which facilitate students revising. We showed that rewarding students' assiduity enhanced their exam success. To do so, we now propose a short continuous assessment exam at the beginning of each practice session in the form of electronic multi-choice questions. Finally, we now propose a completely computerized final exam, on touchpads, that enhanced its docimologic value. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  20. The Asia-Pacific Region on the Paris Agreement against Climate Change: Geopolitics and Cooperation

    Directory of Open Access Journals (Sweden)

    Ana Bertha Cuevas Tello

    2017-11-01

    Full Text Available Given the complexity surrounding climate change, it is argued that the willingness to cooperate on the part of the States is based on one of the faces that, for the climate field, can offer geopolitics: strengths or weaknesses (understood as vulnerability of geographical conditions, location and territory. That is, the physical, geographic, economic and demographic factors of each State influence the decision making of the foreign climate policy, which induces them to cooperate or the abstention of it. This paper will address, broadly speaking, the participation of the main economies of the Asia-Pacific region in the institutionalization of climate change in the International Agenda; the importance of the economies of the Asia-Pacific region with regard to the Paris Agreement; and the geopolitical strengths and weaknesses that explain the cooperative or non-cooperative behavior of the region in the fight against climate change.