Detection of residual packets in cocaine body packers: low accuracy of abdominal radiography - a prospective study

International Nuclear Information System (INIS)

Rousset, Pascal; Vadrot, Dominique; Revel, Marie-Pierre; Chaillot, Pierre-Fleury; Audureau, Etienne; Rey-Salmon, Caroline; Becour, Bertrand; Fitton, Isabelle

2013-01-01

To evaluate the accuracy of abdominal radiography (AXR) for the detection of residual cocaine packets by comparison with computed tomography (CT). Over a 1-year period unenhanced CT was systematically performed in addition to AXR for pre-discharge evaluation of cocaine body packers. AXR and CT were interpreted independently by two radiologists blinded to clinical outcome. Patient and packet characteristics were compared between the groups with residual portage and complete decontamination. Among 138 body packers studied, 14 (10 %) had one residual packet identified on pre-discharge CT. On AXR, at least one reader failed to detect the residual packet in 10 (70 %) of these 14 body packers. The sensitivity and specificity of AXR were 28.6 % (95 % CI: 8.4-58.1) and 100.0 % (95 % CI: 97.0-100.0) for reader 1 and 35.7 % (95 % CI: 12.8-64.9) and 97.6 % (95 % CI: 93.1-99.5) for reader 2. There were no significant patient or packet characteristics predictive of residual portage or AXR false negativity. All positive CT results were confirmed by delayed expulsion or surgical findings, while negative results were confirmed by further surveillance. Given the poor performance of AXR, CT should be systematically performed to ensure safe hospital discharge of cocaine body packers. (orig.)

9 CFR 203.19 - Statement with respect to packers engaging in the business of livestock dealers or buying agencies.

Science.gov (United States)

2010-01-01

... Administration (Packers and Stockyards Programs) has sought to prevent conflicts of interest and to maintain open and fair competition in the livestock and meat packing industries. The ownership or operation of.... Furthermore, the purchase and sale of livestock by meat packers may result in control of markets and prices...

Straddle packer system design and operation for vertical characterization of open bore holes

International Nuclear Information System (INIS)

Olsen, J.K.

1994-01-01

Bore holes open to large intervals provide groundwater samples and test results which represent an unknown integration of properties throughout the depth of the hole. The State of Idaho's INEL Oversight Program is utilizing a custom straddle-packer system to develop a vertical characterization of water chemistry and hydrology in selected open bore holes at the Idaho National Engineering Laboratory. This report describes the design and operation for bore hole zone isolation, water sampling, and hydrologic testing. To reduce potential influences on in situ water chemistry, the system utilizes chemically inert components to the extent possible. Straddle packer systems are effective in producing representative water samples from isolated formations. Hydrologic testing is limited by the ability to produce a measurable stress on the aquifer in individual formations, and head measurement sensitivity. 4 figs

Methamphetamine and amphetamine concentrations in survivors of body-packer syndrome in Japan.

Science.gov (United States)

Uekusa, Kyoko; Hayashida, Makiko; Saito, Nobuyuki; Mashiko, Kunihiro; Hara, Kenji; Waters, Brian; Ohno, Youkichi

2013-04-10

There are few reports from Japan on the analysis of fluids in survivors of body-packer syndrome. We analyzed the concentrations of stimulants in the serum, plasma and urine collected from three patients suspected of being body packers at immigration that were referred to hospitals between 2010 and 2011. The drugs were extracted with solid-phase columns and analyzed by gas chromatography-mass spectrometry (GC-MS). In all cases, wrapped, cylindrical packets of foreign bodies were detected in the intestinal tract on plain X-ray (X-P) and computed tomography (CT), and they were eventually removed surgically. In case 1, the patient presented with convulsions and tachycardia at admission to the hospital and one of the packets was found to have ruptured. In case 2, although the subject appeared to have an intestinal obstruction caused by the packets on the third day, he exhibited no symptoms on arrival and the packets did not appear to have ruptured. In case 3, the patient exhibited restlessness on the first day and one of the removed packets had ruptured. In all cases, methamphetamine (MA) and amphetamine (AP) were detected in serum, plasma and urine. In this study, we report the variation in MA and AP concentrations in survivors of body-packer syndrome. The serum and plasma concentrations of MA were high in subjects that exhibited symptoms of MA intoxication. MA and AP were also detected in the case in which the patient exhibited no symptoms of intoxication and the packets had not ruptured. These results suggest either that the stimulants may have seeped through the wrap of the packets, or that the subject had been abusing the drugs. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Inter-firm coordination in the Mexican avocado (Persea americana) industry: the packer-buyer relationship

NARCIS (Netherlands)

Arana Coronado, J.J.; Bijman, J.; Omta, S.W.F.; Oude Lansink, A.G.J.M.

2012-01-01

Vertical coordination is an effective response to uncertainties in marketing environments. This article presents evidence relating the influence of transaction characteristics on interfirm coordination to respond what conditions determine the level of inter-firm coordination between packers and

Construction substantiation of the combined packer wheel of the seed drill

Directory of Open Access Journals (Sweden)

Дмитро Юрійович Артеменко

2016-11-01

Full Text Available It was determined that the main factors affecting the packing process are the construction of the working body and physical - mechanical properties of the soil. The destruction process of soil particles in the interaction with the wheel was investigated. It was established that the maximum impact on a soil particle occurs when it remains stationary and fixed. An improved construction of the combined packer wheel was proposed

A reba-based analysis of packers workload: a case study

Directory of Open Access Journals (Sweden)

Andrzej M. Lasota

2014-03-01

Full Text Available Background: One of the elements of a logistics system is the subsystem of production, which is a system composed of physical elements such as machinery, tools and (most importantly people. In addition, system-dependent human operators are particularly prone to problems related to discomfort, which can affect production quality and increase training costs and absenteeism. The aim of this study was to assess the workload and risk of musculoskeletal discomfort (MSD's in the process of order fulfillment for the position of packer and to conduct an analysis of risk factors. Methods: The Rapid Entire Body Assessment (REBA evaluation method was used. Activities related to the fulfillment of an order were assessed for three workstations. Results: Five postures qualified for action category (AC 2, seven postures for AC 3 and one posture for AC 4. The main factors affecting the risk of a negative assessment of posture were keeping the back bent and twisted, keeping the arms raised above the trunk, working in a standing position and the weight of packaged carton. Conclusions: Packers working on research positions face a high level of exposure to the risk of MSD's, therefore corrective actions should be carried out as soon as possible. Ergonomic intervention should be linked to redesigning workstations and methods of working. After making changes to the research workstations, re-evaluation using the REBA method is recommended to verify the effectiveness of the changes.

Design, Development and Testing of a Drillable Straddle Packer for Lost Circulation Control in Geothermal Drilling

Energy Technology Data Exchange (ETDEWEB)

Gabaldon, J.; Glowka, D.A.; Gronewald, P.; Knudsen, S.D.; Raymond, D.W.; Staller, G.E.; Westmoreland, J.J.; Whitlow, G.L.; Wise, J.L.; Wright, E.K.

1999-04-01

Lost Circulation is a widespread problem encountered when drilling geothermal wells, and often represents a substantial portion of the cost of drilling a well. The U.S. Department of Energy sponsors research and development work at Sandia National Laboratories in an effort to reduce these lost circulation expenditures. Sandia has developed a down hole tool that improves the effectiveness and reduces th cost of lost circulation cement treatment while drilling geothermal wells. This tool, the Drillable Straddle Packer, is a low-cost disposable device that is used to isolate the loss zone and emplace the cement treatment directly into the region of concern. This report documents the design and development of the Drillabe Straddle Packer, the laboratory and field test results, and the design package that is available to transfer this technology to industry users.

A Case of a Contraband Body Packer Requiring High-Dose Naloxone

Directory of Open Access Journals (Sweden)

Khusro Shamim

2017-09-01

Full Text Available Background:Body packers occasionally refer to the Emergency Department (ED, after leakage of package contents within intestinal lumen, resulting in life-threatening toxicities, depending upon the nature of the chemical product. Case Presentation: We present a case report of a patient presented with sudden onset of drowsiness while he was on board a flight. He was brought in by the airport security staff. On arrival to the ED, his Glasgow Coma Scale (GCS was 3/15 and pupils were pinpoint bilaterally. He was empirically treated with Naloxone on clinical suspicion of narcotic overdose. He required a cumulative dose of 12 mg of Naloxone for reversal of respiratory depression and coma. On subsequent investigation in the ED, he was identified to be a body packer. Discussion: This case represents a rare clinical example of narcotic overdose which resulted in a life-threatening opioid toxicity due to leakage of the package contents into his bowels. In this case, a dosage greater than 10 mg of the maximum recommended dose of Naloxone is required for reversal of toxicity. Conclusion:It is imperative to have a high level of suspicion for managing possible opioid intoxication as immediate treatment can be diagnostic and lifesaving. Our case required more than the recommended dosage of Naloxone, highlighting the possible suggestion of further studies to look into the maximum threshold of this reversal agent.

Straddle-packer determination of the vertical distribution of hydraulic properties in the Snake River Plain Aquifer at well USGS-44, Idaho Chemical Processing Plant, INEL

International Nuclear Information System (INIS)

Monks, J.I.

1994-01-01

Many of the monitor wells that penetrate the upper portion of the Snake River Plain aquifer at the Idaho National Engineering Laboratory (INEL) are open over large intervals that include multiple water-bearing zones. Most of these wells are equipped with dedicated submersible pumps. Water of varying quality from different water-bearing zones is mixed within the wells. The hydrologic properties of individual water bearing zones are difficult to determine. Water quality and water-level data on organic, heavy metal, and radioactive contaminants have been collected, reported, and interpreted from these monitor wells for more than forty years. The problems associated with well completions over large intervals through multiple water-bearing zones raise significant questions about the data. A straddle-packer system was developed and applied at the INEL site to investigate the monitor well network. The straddle-packer system, hydraulic testing methods, data analysis procedures, and testing results are described in this report. The straddle-packer system and the straddle-packer testing and data evaluation procedures can be improved for future testing at the INEL site. Recommended improvements to the straddle-packer system are: (1) improved transducer pressure sensing systems, (2) faster opening riser valve, and (3) an in-line flowmeter in the riser pipe. Testing and data evaluation recommended improvements are: (1) simultaneous valve opening during slug tests, (2) analysis of the ratio of the times for head change and recovery to occur, (3) constant-drawdown tests of high transmissivity intervals, (4) multiple-well aquifer tests, and (5) long term head monitoring

Recruitment and selection for the packer position in a supermarket network

Directory of Open Access Journals (Sweden)

Lucila Moraes Cardoso

2013-06-01

Full Text Available The method of personnel recruitment and selection is a common practice to hire people in organizations. The goal of this study is to report and to reflect about this process in a supermarket chain, which operates in food and non-food retail in the state of Sao Paulo. The purpose of the present intervention was to facilitate the recruitment and selection process for the packer position. After the intervention, we noticed an improvement on the hiring process, on the working conditions and a turnover reduction in this position.

Ultra high-temperature solids-free insulating packer fluid for oil and gas production, steam injection and geothermal wells

Energy Technology Data Exchange (ETDEWEB)

Ezell, R.G.; Harrison, D.J. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Halliburton Energy Services, Calgary, AB (Canada)

2008-10-15

Uncontrolled heat transfer from production/injection tubing during thermal oil recovery via steam injection can be detrimental to the integrity of the casing and to the quality of the steam that is injected into the reservoir. An aqueous-based insulating packer fluid (IPF) was introduced to improve the steam injection process by controlling the total heat loss from the produced fluids to the surrounding wellbore, internal annuli and formation. The IPF was developed for elevated temperature environments through extensive investigation across multidisciplinary technology. The innovative system delivers performance beyond conventional systems of comparable thermal conductivity. Its density range and conductivity measurements were presented in this paper. High-temperature static aging tests showed superior gel integrity without any phase separation after exposure to temperatures higher than 260 degrees C. The new fluids are hydrate inhibitive, non-corrosive and pass oil and grease testing. They are considered to be environmentally sound by Gulf of Mexico standards. It was concluded that the new ultra high-performance insulating packer fluid (HTIPF) reduced the heat loss significantly by both conduction and convection. Heat transfer within the aqueous-based HTIPF was 97 per cent less than that of pure water. It was concluded that the HTIPF can be substituted for conventional packer fluids without compromising any well control issues. 21 refs., 1 tab., 4 figs.

Body packers on your examination table: How helpful are plain x-ray images? A definitive low-dose CT protocol as a diagnosis tool for body packers

International Nuclear Information System (INIS)

Schulz, B.; Grossbach, A.; Gruber-Rouh, T.; Zangos, S.; Vogl, Th. J.; Eichler, K.

2014-01-01

Aim: To analyze the clinical value and radiation dose of plain x-rays and CT in examining patients suspected of ingesting drug-filled packets. Materials and methods: Thirty-eight patients with suspected internal concealment of drug-filled packets who were examined with plain x-rays or CT or both were included in the study. CT studies were performed using low-dose and standard-dose techniques. All radiographic images were analysed by two radiologists regarding identification of the packets and estimating the effective radiation dose from standard- and low-dose CT versus conventional x-ray examinations. Descriptive calculations were made regarding the number and density of packs and radiation dosage. The diagnostic performance of both radiologists with standard- and low-dose CT was calculated by analysing differences in the mean number of packs found. Results: Thirty-one patients were positively identified as body packers with an average of 13 packs (min: n = 1, max: n = 58, total: n = 390); seven patients were not concealing drug packets. X-ray images were taken of 24 patients prior to CT, thus allowing a direct comparison between the two methods. The correct diagnosis was made in 42%, in 33% the radiologists were uncertain, and in 25% of drug packets were either not or wrongly identified. X-ray imaging had a positive predictive value of 20% with a negative predictive value of 81%. A total of 55 CT examinations were performed on all patients with a mean effective dose of 2 mSv (low dose) versus 9.3 mSv (standard dose). The visibility of packets on low-dose CT images compared to high-dose CT was not reduced: the radiologists identified 385 and 381 of the packets, respectively, with no difference regarding the examination technique (p = 0.24 and p = 0.253, respectively). The radiodensity of all drug-filled packets at CT ranged from 26–292 HU (mean 181.2 HU). Conclusion: X-ray imaging of supposed body packers leads to a significant risk of diagnostic

The Numerical Analysis of Monopolistically Competitive Markets: The Case of a New York Fresh Apple Packer

OpenAIRE

Starbird, Sterling A.; Milligan, Robert A.

1987-01-01

The hypothesis is adduced that in some monopolistically competitive markets a firm's demand schedule evolves faster than the firm's marketing policies can adjust. A probabilistic model of this phenomenon is introduced. The numerical analysis of a New York fresh apple packer's inventory control policies illustrates the model's usefulness.

Results of the use and ways to improve transcolumn packers at fields of the Tatar ASSR

Energy Technology Data Exchange (ETDEWEB)

Golyshkina, L A; Kateyev, I S; Pleshko, O F

1979-01-01

A classification is made of wells according to the complexity of separation of the beds. Five categories are isolated. The criterion for comparing the categories was the presence or absence in the productive part of the section of water-bearing levels and screening beds. In a number of cases, as a result of unsatisfactory sedimentation stability of the cementing fluid, channels can be formed in it which may be the reason for transcolumn overflows and interruption in the removal of pure (not containing water) oil. In order to control transcolumn overflows in wells of the II-III-IV category, packer-filters (PFM) are used whose action is based on the forced recovery from the cement fluid of part of the liquid phase. The use of PFM is recommended only after conducting of a set of special (laboratory, geophysical, geological-technical, ect.) studies. The possibility is shown of positive use of PFM not only in the well shafts of nominal diameter, but also in wells prone to cavern formation. In the example of well No 13993 of the Abdrakhmanovskiy field, the possibility is shown of sectioning the PFM. Based on the PFM, and PFU was created with elongated filtering part. The results of introducing the PFU and the PFM are positive, and the economic effect from using the PFU is 1.5-fold greater than from PFM. In addition to PFU and PFM, the wells of the association ''Tatneft''' have used packers of the type PPG designed by the All-Union Scientific Research of Drilling Equipment. The results of introducing the packers PPG are positive.

21 CFR 101.5 - Food; name and place of business of manufacturer, packer, or distributor.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Food; name and place of business of manufacturer... Food; name and place of business of manufacturer, packer, or distributor. (a) The label of a food in... business in lieu of the actual place where such food was manufactured or packed or is to be distributed...

9 CFR 203.18 - Statement with respect to packers engaging in the business of custom feeding livestock.

Science.gov (United States)

2010-01-01

... options with respect to the marketing of their livestock; (2) That all feedlot customers are treated... marketing decisions rest solely with the feedlot customer unless otherwise expressly agreed. (c) Packer... places of production, but are also important marketing centers, and in connection with the operation of a...

21 CFR 501.5 - Animal food; name and place of business of manufacturer, packer, or distributor.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Animal food; name and place of business of... LABELING General Provisions § 501.5 Animal food; name and place of business of manufacturer, packer, or... which the business is conducted shall be used. (c) Where the food is not manufactured by the person...

Field application. Selective stimulation of reservoirs or perforated intervals with use of coiled tubing equipped with real-time data communication system in combination with straddle packer assemblies

Energy Technology Data Exchange (ETDEWEB)

Oberascher, R.; Breimer, G. [GDF SUEZ E and P Deutschland GmbH, Lingen (Germany); Jonge, R.M. de [Baker Hughes (Netherlands)

2013-08-01

In two German gas wells a decline in production and wellhead pressures had been observed. Production logging data obtained by PLT surveys were evaluated, which showed that certain intervals within the reservoir section did not contribute, or showed a restricted contribution to the overall gas production. The restricted contribution was suspected to be caused by near-wellbore damage. To restore or enhance the production of the perforated intervals an acid treatment was considered in these wells in order to remove skin damage. To restore or enhance the production of the wells, an acid treatment of the perforated intervals was designed. For obtaining the required selective placement of the acid across the zones of interest, the use of coiled tubing (CT) in combination with a resettable straddle packer assembly was selected. The accuracy of the setting depth of the straddle packer was a critical issue for the execution of the well intervention operations. In order to obtain the required depth accuracy, the CT string was equipped with an intelligent CT communication system, which transfers real-time downhole data to surface. For the first time, a reservoir stimulation project was executed by combining CT equipped with a real-time data communication system (TeleCoil) and the Inflatable Straddle Acidizing Packer (ISAP) assembly. Inside the CT an encapsulated monoconductor cable was installed to transmit real-time data from the CT Bottom Hole Assembly (BHA) to surface. The BHA consists of a Casing Collar Locator (CCL) and downhole pressure and temperature gauges. Due to the protective jacket of the monoconductor cable, there are no restrictions in the use of different fluids in combination with the system. Information provided by the CCL monitoring tool ensures accurate depth correlations, whereas differential pressure measurements from the down-hole pressure gauges provide positive information about the setting and sealing conditions of the straddle packer assembly. The

Fatal cocaine intoxication in a body packer

Directory of Open Access Journals (Sweden)

Brajković Gordana

2016-01-01

Full Text Available Introduction. ‘Body packer’ syndrome with severe intoxication or sudden death may happen in persons who smuggle drugs in their body cavities. In case of lethal outcome when carrying cocaine, it is important, but sometimes difficult to determine whether death was due to intoxication or due to other causes. Therefore, it is necessary not only to quantify cocaine and its metabolites in biological material, but also based on their distribution in body fluids and tissues to conclude whether it is acute intoxication. We described a well-documented case of fatal poisoning in a body packer and post mortem distribution of the drug in biological samples. Case report. A 26-year-old man was brought to hospital with no vital signs. Resuscitation measures started at once, but with no success. Autopsy revealed 66 packets of cocaine in his digestive tract, one of which was ruptured. Hyperemia of the most of all internal organs and pulmonary and brain edema were found. High concentrations of cocaine, its metabolites benzoylecgonine and ecgonine methyl ester, as well as cocaine adulteration levamisole were proven in the post mortem blood and tissues by liquid chromatography-mass spectrometry (LC-MC method with selective-ion monitoring. Conclusion. The ratio of cocaine and its metabolites concentrations in the brain and blood obtained by LC-MS method can be used for forensic confirmation of acute intoxication with cocaine.

The outcome of drug smuggling by 'body packers'--the British experience.

Science.gov (United States)

Bulstrode, N; Banks, F; Shrotria, S

2002-01-01

Body packing or internal concealment used by drug dealers to smuggle illicit substances, puts the body packer at risk of both imprisonment and death. We report our experience over a 4 year period from January 1996 to December 1999 of suspects presenting to our hospital (the largest series in Europe). A total of 572 cases were assessed radiographically and 180 were shown to be carrying foreign bodies. The commonest reasons for admission were suspected overdose or gastrointestinal obstruction. Thirty-six cases were admitted, of whom 7 required surgical intervention. No deaths occurred. Of all people detained for smuggling by internal concealment into Britain during this period, 27% were seen in our hospital. These cases may present alone or escorted by Her Majesty's Customs and Excise personnel, and one must be aware of this possibility even when situated away from a port of entry.

Body packers on your examination table: How helpful are plain x-ray images? A definitive low-dose CT protocol as a diagnosis tool for body packers.

Science.gov (United States)

Schulz, B; Grossbach, A; Gruber-Rouh, T; Zangos, S; Vogl, Th J; Eichler, K

2014-12-01

To analyze the clinical value and radiation dose of plain x-rays and CT in examining patients suspected of ingesting drug-filled packets. Thirty-eight patients with suspected internal concealment of drug-filled packets who were examined with plain x-rays or CT or both were included in the study. CT studies were performed using low-dose and standard-dose techniques. All radiographic images were analysed by two radiologists regarding identification of the packets and estimating the effective radiation dose from standard- and low-dose CT versus conventional x-ray examinations. Descriptive calculations were made regarding the number and density of packs and radiation dosage. The diagnostic performance of both radiologists with standard- and low-dose CT was calculated by analysing differences in the mean number of packs found. Thirty-one patients were positively identified as body packers with an average of 13 packs (min: n = 1, max: n = 58, total: n = 390); seven patients were not concealing drug packets. X-ray images were taken of 24 patients prior to CT, thus allowing a direct comparison between the two methods. The correct diagnosis was made in 42%, in 33% the radiologists were uncertain, and in 25% of drug packets were either not or wrongly identified. X-ray imaging had a positive predictive value of 20% with a negative predictive value of 81%. A total of 55 CT examinations were performed on all patients with a mean effective dose of 2 mSv (low dose) versus 9.3 mSv (standard dose). The visibility of packets on low-dose CT images compared to high-dose CT was not reduced: the radiologists identified 385 and 381 of the packets, respectively, with no difference regarding the examination technique (p = 0.24 and p = 0.253, respectively). The radiodensity of all drug-filled packets at CT ranged from 26-292 HU (mean 181.2 HU). X-ray imaging of supposed body packers leads to a significant risk of diagnostic errors and additional need for CT. Instead, a single abdominal low

Techniques for Field Operation of Straddle-packer System in Deep Borehole

International Nuclear Information System (INIS)

Kim, Kyung Su; Park, Kyung Woo; Kim, Geon Young; Ji, Sung Hoon; Koh, Yong Kwon; Choi, Jong Won

2010-05-01

It is necessary to establish an appropriate hydro-testing tool for the qualified characterization of deep geological environments, especially for the hydraulic properties of rock formation. This research project had been initiated for the purpose of establishment of advanced infra-structures in KURT. The straddle packer system was developed for hydraulic characterization of geological formation using deep borehole. This technical report consists of design concept, basic requirements, function of each part, field operation procedures and techniques, detail design drawings, and specifications. The qualified hydro-testing tool, which is suitable for medium to low permeable formation, using large and deep borehole, has been developed. This tool will be applied for the research project on development of HLW disposal technologies and the site characterization activities of LILW disposal project. Prior to field operation using this hydro-testing equipment, every researchers should be well acquainted with this technical report

A multi-packer technique for investigating resistance to flow through fractured rock and illustrative results

International Nuclear Information System (INIS)

Bourke, P.J.; Rae, J.

1981-01-01

A multi-packer technique was used to locate twelve discrete fractures in the lower half of a 200 m deep drill hole in Cornish granite. The resistances to water flows into these fractures both singly and together were measured. Geological explanations of the results obtained were sought by examination of core from the hole. Analysis of the results and the further data needed and now being sought to determine resistance to flow over long distances through the pattern of interconnected fractures are discussed. This information is required for the assessment of the safety of burial of radioactive wastes

Installation of the multi-packer system for the long-term monitoring of deep groundwater system

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyung Su; Bae, Dae Seok; Kim, Chun Soo; Park, Byung Yoon; Koh, Yong Kweon; Kim, Geon Young [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-05-01

The groundwater system in the deep geological environment is very important to evaluate the behavior of the radionuclide migration and near-field barrier system. The multi-packer system was installed to derive the long-term change of the groundwater pressure and its quality in the several isolated monitoring zones with depth in the study sites. The monitoring zones were basically determined by the spatial distribution characteristics of the conductive fracture and their hydraulic properties. To recover the natural groundwater condition, the borehole water was purged after completing the installation. From this equipment, the in-situ data will be provided to the radionuclide migration and system development study. 2 refs., 9 figs., 3 tabs. (Author)

On the interpretation of double-packer tests in heterogeneous porous media: Numerical simulations using the stochastic continuum analogue

International Nuclear Information System (INIS)

Follin, S.

1992-12-01

Flow in fractured crystalline (hard) rocks is of interest in Sweden for assessing the postclosure radiological safety of a deep repository for high-level nuclear waste. For simulation of flow and mass transport in the far field different porous media concepts are often used, whereas discrete fracture/channel network concepts are often used for near-field simulations. Due to lack of data, it is generally necessary to have resort to single-hole double-packer test data for the far-field simulations, i.e., test data on a small scale are regularized in order to fit a comparatively coarser numerical discretization, which is governed by various computational constraints. In the present study the Monte Carlo method is used to investigate the relationship between the transmissivity value interpreted and the corresponding radius of influence in conjunction with single-hole double-packer tests in heterogeneous formations. The numerical flow domain is treated as a two-dimensional heterogeneous porous medium with a spatially varying diffusivity on 3 m scale. The Monte Carlo simulations demonstrate the sensitivity to the correlation range of a spatially varying diffusivity field. In contradiction to what is tacitly assumed in stochastic subsurface hydrology, the results show that the lateral support scale (e.g., the radius of influence) of transmissivity measurements in heterogeneous porous media is a random variable, which is affected by both the hydraulic and statistical characteristics. If these results are general, the traditional methods for scaling-up, assuming a constant lateral scale of support and a multi normal distribution, may lead to an underestimation of the persistence and connectivity of transmissive zones, particularly in highly heterogeneous porous media

NASA's Newest SeaWinds Instrument Breezes Into Operation

Science.gov (United States)

2003-01-01

One of NASA's newest Earth-observing instruments, the SeaWinds scatterometer aboard Japan's Advanced Earth Observing Satellite (Adeos) 2--now renamed Midori 2--has successfully transmitted its first radar data to our home planet, generating its first high-quality images.From its orbiting perch high above Earth, SeaWinds on Midori 2 ('midori' is Japanese for the color green, symbolizing the environment) will provide the world's most accurate, highest resolution and broadest geographic coverage of ocean wind speed and direction, sea ice extent and properties of Earth's land surfaces. It will complement and eventually replace an identical instrument orbiting since June 1999 on NASA's Quick Scatterometer (QuikScat) satellite. Its three- to five-year mission will augment a long-term ocean surface wind data series that began in 1996 with launch of the NASA Scatterometer on Japan's first Adeos spacecraft.Climatologists, meteorologists and oceanographers will soon routinely use data from SeaWinds on Midori 2 to understand and predict severe weather patterns, climate change and global weather abnormalities like El Nino. The data are expected to improve global and regional weather forecasts, ship routing and marine hazard avoidance, measurements of sea ice extent and the tracking of icebergs, among other uses.'Midori 2, its SeaWinds instrument and associated ground processing systems are functioning very smoothly,' said Moshe Pniel, scatterometer projects manager at NASA's Jet Propulsion Laboratory, Pasadena, Calif. 'Following initial checkout and calibration, we look forward to continuous operations, providing vital data to scientists and weather forecasters around the world.' 'These first images show remarkable detail over land, ice and oceans,' said Dr. Michael Freilich, Ocean Vector Winds Science Team Leader, Oregon State University, Corvallis, Ore. 'The combination of SeaWinds data and measurements from other instruments on Midori 2 with data from other international

ONR (Office of Naval Research) Far East Scientific Information Bulletin. Volume 13, Number 4, October-December 1988

Science.gov (United States)

1988-12-01

64, 189 (1986). 9. Y. Kitaoka, S. Hiramatsu, T. Kohara , 2. S. Uchida, H. Takagi, K. Kitazawa, K. Asayama, K. Ohishi, M. Kikuchi, and and S. Tanaka...Ishida, and S. Tanaka, Jpn. J. Appi. Phys. 26, L123 T. Kohara , and K. Asayama, J. Phys. Soc. (1987). Jpn. 56, 3024 (1987). 3. K. Kishio, K. Kitazawa, S

Development of a quality management system for borehole investigations. (1) Quality assurance and quality control methodology for hydraulic packer testing

International Nuclear Information System (INIS)

Takeuchi, Shinji; Kunimaru, Takanori; Ota, Kunio; Frieg, Bernd

2011-01-01

A quality assurance and quality control (QA/QC) system for the hydraulic packer tests has been established based on the surface-based investigations at JAEA's underground research laboratories in Mizunami and Horonobe. The established QA/QC system covers field investigations (data acquisition) and data analysis. For the field investigations, the adopted procedure is selection of a test section based on a detail fluid logging and checking with tally list, followed by inspection of test tools such as pressure transducers and shut-in valves, etc., test method selection using a 'sequential hydraulic test' for deciding appropriate method, and finally data quality confirmation by pressure changes and derivatives on a log-log plots during testing. Test event logs should also be described during testing for traceability. For the test data analysis, a quick analysis for rough estimation of hydraulic parameters, and a detailed analysis using type curve and/or numerical analyses are conducted stepwise. The established QA/QC system has been applied to the recent borehole investigations and its efficiency has been confirmed. (author)

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

... India; Department of Chemistry, University of Mysore, Manasagangotri, Mysore 570 006, India; Department of Physics, University of Mysore, Manasagangotri, Mysore 570 006, India; Materials Structures Laboratory, Centre for Materials Design, Tokyo Institute of Technology, 4259, Nagatsuta, Midori, Yokohama 226, Japan ...

Straddle-packer aquifer test analyses of the Snake River Plain aquifer at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Johnson, G.S.; Frederick, D.B.

1997-01-01

The State of Idaho INEL Oversight Program, with the University of Idaho, Idaho State University, Boise State University, and the Idaho Geologic Survey, used a straddle-packer system to investigate vertical variations in characteristics of the Snake River Plain aquifer at the Idaho National Engineering Laboratory in southeast Idaho. Sixteen single-well aquifer tests were conducted on.isolated intervals in three observation wells. Each of these wells has approximately 200 feet of open borehole below the water table, penetrating the E through G and I basalt flow groups and interbedded sediments of the Snake River Plain aquifer. The success of the aquifer tests was limited by the inability to induce measurable drawdown in several zones. Time-drawdown data from aquifer tests were matched to type curves for 8 of the 16 zones tested. A single aquifer test at the water table exhibited greater curvature than those at depth. The increased degree of curvature suggests an unconfined response and resulted in an estimate of specific yield of 0.03. Aquifer tests below the water table generally yielded time-drawdown graphs with a rapid initial response followed by constant drawdown throughout the duration of the tests; up to several hours in length. The rapid initial response implies that the aquifer responds as a confined system during brief pumping periods. The nearly constant drawdown suggests a secondary source of water, probably vertical flow from overlying and underlying aquifer layers. Three analytical models were applied for comparison to the conceptual model and to provide estimates of aquifer properties. This, Hantush-Jacob leaky aquifer, and the Moench double-porosity fractured rock models were fit to time-drawdown data. The leaky aquifer type curves of Hantush and Jacob generally provided the best match to observed drawdown. A specific capacity regression equation was also used to estimate hydraulic conductivity

基于压水试验的深部煤层底板岩层阻渗性能研究∗%Study on permeability barrier performance of deep coal seam floor based on packer permeability test

Institute of Scientific and Technical Information of China (English)

孙晓倩; 张冬; 张新武; 王言剑

2014-01-01

In situ field packer permeability test,being a reliable method to obtain the param-eters of permeability barrier performance of strata,was used to explore this performance of deep coal seam floor. A large amount of measured data were obtained after the test on two layers of floor strata. The test results showed that these two layers of floor strata could not seep in initial state due to stronger barrier performance until the fracture and connection led to seepage. Co MPared with the first and repeated packer permeability tests on these two layers of floor strata, the variation of water pressure in measured pore was associated with that in water injection hole, but the seepage pressure in the first time was higher than that in second time,showing that the permeability barrier performance of strata turned weaker after first packer permeability test and was easy to form seepage. Using permeability coefficient and permeability barrier strength as in-dexes,the permeability barrier performance of floor strata has been quantitatively evaluated,and the results showed that the tested strata was characterized with high barrier performance and weak permeability.%原位现场压水试验是获取岩层阻渗性能参数的可靠方法，为探究某煤矿深部煤层底板阻渗能力，采用现场压水试验方法对底板两段岩层进行了测试并获取了大量的实测数据。结果分析表明：该底板两测试段岩层在原始状态均不导渗，阻渗性较强，直至压裂导通才形成导渗条件；对两段岩层均进行了初次和重复两个压水过程，对比两次试验可知，测渗孔水压力与注水孔水压力的关联变化趋势大致相同，但初次压水的起始导渗水压明显高于重复压水，表明在初次压水后岩层的阻渗能力降低，更易形成导渗；采用渗透系数和阻渗强度作为指标，对底板岩层的阻渗性能进行了量化评价，结果表明测试岩层表现出明显的高阻弱渗的特点。

9 CFR 206.1 - Definitions.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Definitions. 206.1 Section 206.1 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND... account. Further, the contract specifies how the balance in the account affects producer and packer rights...

Classificação de cultivares de brássicas com relação à resistência à traça-das-crucíferas e à presença de glucosinolatos Brassicas cultivars classification in relation to resistance to diamondback moth and to the presence of glucosinolates

Directory of Open Access Journals (Sweden)

Robson Thomaz Thuler

2007-04-01

Full Text Available O objetivo deste trabalho foi avaliar o efeito de cultivares de repolho e de couve na biologia da traça-das-crucíferas; analisar a composição química das plantas, em relação aos glucosinolatos e aplicar a análise multivariada na classificação das cultivares. Foram utilizadas as cultivares: de repolho verde Chato-de-quintal e o híbrido Midori; de repolho roxo Roxo precoce e o híbrido Roxo TPC00682; e de couve-manteiga Geórgia (padrão de suscetibilidade e Geórgia híbrido HS20. Foram avaliadas as características biológicas da praga: viabilidade e duração das fases larval e pupal, razão sexual, fecundidade das fêmeas, longevidade dos adultos e duração e viabilidade da fase de ovo, tendo-se calculado o potencial reprodutivo corrigido (PRC. Obtiveram-se as correlações entre os parâmetros pelo método de Pearson, e realizaram-se análises multivariadas de agrupamento e de componentes principais. Em cromatógrafo líquido, avaliaram-se a presença de sinigrina e de outros glucosinolatos nas plantas. A cultivar Geórgia e os híbridos HS20 e Roxo foram classificados como altamente suscetíveis; 'Roxo precoce' e 'Midori' como suscetíveis e, 'Chato-de-quintal' como moderadamente resistente à Plutella xylostella. As análises multivariadas proporcionam melhor classificação das cultivares, em razão do grau de resistência apresentado. Os materiais genéticos avaliados não apresentam a substância secundária sinigrina.The objective of this work was to evaluate the effect of cabbage and kale cultivars on the diamondback moth biology; to analyze the plant chemical composition in relation to glucosinolates and to apply the multivariate analysis to classify cultivar resistance. Trials were conduct using: green cabbage cultivar Chato-de-quintal and hybrid Midori; purple cabbage Roxo precoce and purple hybrid TPC00682; kale cultivar Georgia (susceptibility standard and hybrid HS20. The pest biological characteristics evaluated were

Antagonism of yeasts to Xanthomonas campestris pv. campestris on cabbage phylloplane in field Antagonismo de leveduras a Xanthomonas campestris pv. campestris no filoplano de repolho em condições de campo

Directory of Open Access Journals (Sweden)

Sayonara M.P. Assis

1999-07-01

Full Text Available Twenty yeast isolates, obtained from cabbage phylloplane, were evaluated for antagonistic activity against Xanthomonas campestris pv. campestris, in field. Plants of cabbage cv. Midori were pulverized simultaneously with suspensions of antagonists and pathogen. After 10 days, plants were evaluated through percentage of foliar area with lesions. Percentage of disease severity reduction (DSR% was also calculated. Yeast isolates LR32, LR42 and LR19 showed, respectively, 72, 75 and 79% of DSR. These antagonists were tested in seven different application periods in relation to pathogen inoculation (T1=4 d before; T2=simultaneously; T3=4 d after; T4=4 d before + simultaneously; T5=4 d after + simultaneously; T6=4 d before + 4 d after; T7=4 d before + simultaneously + 4 d after. The highest DSRs were showed by LR42 (71%, LR42 (67%, LR35 (69% and LR19 (68% in the treatments T7, T4, T5 and T6, which significantly differed from the others. The same yeast antagonists were also tested for black rot control using different cabbage cultivars (Fuyutoyo, Master-325, Matsukaze, Midori, Sekai I and Red Winner. The DSRs varied from 58 to 61%, and there was no significant difference among cultivars.Vinte isolados de leveduras, obtidos a partir do filoplano de repolho foram avaliados pela atividade antagônica contra Xanthomonas campestris pv. campestris, em condições de campo. Plantas de repolho cv. Midori foram pulverizadas simultaneamente com suspensões do antagonista e do patógeno. Após 10 dias, as plantas foram avaliadas através da porcentagem de área foliar infectada. A porcentagem de redução da severidade da doença (DSR%, também foi calculada. Os isolados de leveduras LR32, LR42 e LR19 apresentaram, respectivamente, 72, 75 e 79% de DSR. Estes isolados foram testados em sete diferentes períodos de aplicação dos antagonistas em relação a inoculação do patógeno. (T1=4d antes; T2=simultaneamente; T3=4 d após; T4=4 d antes + simultaneamente; T5

Correlation between movement complexity during static standing and balance function in institutionalized older adults

OpenAIRE

Yamagata, Momoko; Ikezoe, Tome; Kamiya, Midori; Masaki, Mitsuhiro; Ichihashi, Noriaki

2017-01-01

Momoko Yamagata,1 Tome Ikezoe,1 Midori Kamiya,1 Mitsuhiro Masaki,2,3 Noriaki Ichihashi1 1Human Health Sciences, Graduate School of Medicine, Kyoto University, Kyoto, 2Department of Physical Therapy, 3Institute for Human Movement and Medical Sciences, Niigata University of Health and Welfare, Niigata, Japan Purpose: Sample entropy (SampEn) is an analysis to evaluate movement complexity of the center of pressure (COP). A lower value of SampEn indicates lower complexity of COP variability, tha...

A simple improvement of the conventional cryopreservation for human ES and iPS cells

OpenAIRE

sprotocols

2014-01-01

Authors: Midori Ozawa, Yutaka Ozawa, Masashi Iemura, Arihiro Kohara, Kana Yanagihara & Miho K Furue ### Abstract In this study, a simple method for the cryopreservation of human embryonic stem (ES) and induced pluripotent stem (iPS) cells is proposed. It is based on the conventional slow-freezing method with 10% DMSO and modified mainly in a thawing protocol without specific equipment or reagents. Recovery rate of the cells cryopreserved by this method was equally high, which is compa...

Database Description - eSOL | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available base Description General information of database Database name eSOL Alternative nam...eator Affiliation: The Research and Development of Biological Databases Project, National Institute of Genet...nology 4259 Nagatsuta-cho, Midori-ku, Yokohama, Kanagawa 226-8501 Japan Email: Tel.: +81-45-924-5785 Database... classification Protein sequence databases - Protein properties Organism Taxonomy Name: Escherichia coli Taxonomy ID: 562 Database...i U S A. 2009 Mar 17;106(11):4201-6. External Links: Original website information Database maintenance site

Computed tomography scout views vs. conventional radiography in body-packers – Delineation of body-packs and radiation dose in a porcine model

Energy Technology Data Exchange (ETDEWEB)

Ziegeler, Edvard, E-mail: edvard.ziegeler@campus.lmu.de [Institute for Clinical Radiology, Ludwig-Maximilians-University Hospital Munich, Nussbaumstraße 20, 80336 Munich (Germany); Grimm, Jochen M., E-mail: jochen.grimm@med.lmu.de [Institute for Clinical Radiology, Ludwig-Maximilians-University Hospital Munich, Nussbaumstraße 20, 80336 Munich (Germany); Wirth, Stefan, E-mail: tefan.wirth@med.lmu.de [Institute for Clinical Radiology, Ludwig-Maximilians-University Hospital Munich, Nussbaumstraße 20, 80336 Munich (Germany); Uhl, Michael, E-mail: michael.uhl@polizei.bayern.de [Bavarian State Criminal Police Office, Maillingerstrasse 15, 80636 Munich (Germany); Reiser, Maximilian F., E-mail: Maximilian.Reiser@med.lmu.de [Institute for Clinical Radiology, Ludwig-Maximilians-University Hospital Munich, Nussbaumstraße 20, 80336 Munich (Germany); Scherr, Michael K., E-mail: Michael.Scherr@med.lmu.de [Institute for Clinical Radiology, Ludwig-Maximilians-University Hospital Munich, Nussbaumstraße 20, 80336 Munich (Germany)

2012-12-15

Objective: To compare abdominal computed tomography (CT) scout views with conventional radiography regarding radiation dose and delineation of drug packages in a porcine body-packer model. Materials and methods: Nine samples of illicit drugs packed in ovoid plastic containers were consecutively placed in the rectum of a 121.5 kg pig cadaver. Antero-posterior and lateral scout views were obtained at 120 kVp and 80 mA, 150 mA and 200 mA, respectively, using a 64-row MDCT. Scout views were compared with conventional abdominal antero-posterior radiographs (77 kV and 106 ± 13 mAs). Visibility of three body pack characteristics (wrapping, content, shape) was rated independently by two radiologists and summarized to a delineation score ranging from 0 to 9 with a score ≥6 representing sufficient delineation. Mean delineation scores were calculated for each conventional radiography and single plane scout view separately and for a combined rating of antero-posterior and lateral scout views. Results: Even the lowest single plane scout view delineation score (5.3 ± 2.0 for 80 mA lateral; 0.4 mSv; sensitivity = 44%) was significantly higher than for conventional radiographs (3.1 ± 2.5, p < 0.001; 2.4 ± 0.3 mSv; sensitivity = 11%). Combined reading of antero-posterior and lateral scout views 80 mA yielded sufficient delineation (6.2 ± 1.4; 0.8 mSv; sensitivity = 56%). Conclusions: All CT scout views showed significantly better delineation ratings and sensitivity than conventional radiographs. Scout views in two planes at 80 mA provided a sufficient level of delineation and a sensitivity five times higher than conventional radiography at less than one third of the radiation dose. In case of diagnostic insecurity, CT can be performed without additional logistical effort.

Instrumentation for determining rock mass permeability by hydro-pneumatic pressure testing

International Nuclear Information System (INIS)

Miller, W.O.

1981-01-01

In order to eliminate the problems encountered with existing pressure test equipment, a downhole control unit was designed for conducting tests in NX boreholes. The unit maintains a preset minimum differential pressure between the packers and the test section, and controls inflation and deflation of the packers. The packer response to inflation and deflation commands is greatly increased in deep borings since the control unit is located downhole, and inflation is accomplished with the testing fluid (which is normally either water or air). For increased flexibility, the control unit was designed with the capacity for operating as either a single- or double-packer system by the use of simple ground surface control commands

9 CFR 201.61 - Market agencies selling or purchasing livestock on commission; relationships with dealers.

Science.gov (United States)

2010-01-01

... INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND STOCKYARDS PROGRAMS), DEPARTMENT OF... association with dealers or other buyers which has a tendency to lessen the loyalty of the market agency to...

76 FR 15936 - Designation for the Owensboro, KY; Bloomington, IL; Iowa Falls, IA; Casa Grande, AZ; Fargo, ND...

Science.gov (United States)

2011-03-22

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Designation for the Owensboro, KY; Bloomington, IL; Iowa Falls, IA; Casa Grande, AZ; Fargo, ND; Grand Forks, ND; and Plainview, TX Areas AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION: Notice...

In situ determination of anisotropic permeability of clay

International Nuclear Information System (INIS)

Shao, H.; Soennke, J.; Morel, J.; Krug, S.

2010-01-01

Document available in extended abstract form only. Clay stone has, due to its tectonic evolution of the formation, hydraulically and mechanically transversal isotropic behaviour. Argillite bedding or layering structure has been observed in the underground laboratories Mont Terri in Switzerland and Meuse/Haute-Marne at Bure site in France. To characterise the hydraulic properties of the clay formation, single and double packer systems have been applied based on the packer test theory. However, this kind of packer type cannot distinguish the difference between the properties parallel to the bedding and perpendicular to the bedding. The previous investigations using single packer system in boreholes parallel and perpendicular to bedding show quite different pressure decrease rates. The measured pressure development serves for the determination of the hydraulic parameters, which however may also be influenced by pore water pressure in partially or fully saturated medium, like clay stone. In order to filter out this influence, the measurements should be made at the same location in the same borehole. Therefore a 'slot packer' system has been developed to measure hydraulic properties in dependency of bedding direction. An intensive test program has been carried out in the Mont Terri Rock Laboratory to judge the feasibility of the new packer system for the hydraulic anisotropy characterisation before the packer will be applied in the French Underground Laboratory Meuse/Haute-Marne. One important issue of the test program is to get the feeling of the packer handling and technical features. Three campaigns in 2007 and four campaigns in 2008 have been carried out. Seven boreholes with length from 3 to 10 metres have been drilled for the test purpose. The long boreholes with a length of ten metres are originally planned for intensive testing in the undisturbed zone, the short holes for the near-field characterisation. The disturbed zone around an underground opening

7 CFR 1212.26 - Research.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false Research. 1212.26 Section 1212.26 Agriculture... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HONEY PACKERS AND IMPORTERS RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Honey Packers and Importers Research, Promotion...

75 FR 76254 - Official Performance and Procedural Requirements for Grain Weighing Equipment and Related Grain...

Science.gov (United States)

2010-12-08

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration 7 CFR Part 802 [Docket GIPSA-2010-FGIS-0012] RIN 0580-AB19 Official Performance and Procedural Requirements for Grain Weighing Equipment and Related Grain Handling Systems AGENCY: Grain Inspection, Packers and Stockyards...

9 CFR 204.2 - Organization.

Science.gov (United States)

2010-01-01

... Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont) Omaha—909 Livestock Exchange Building..., Packers and Stockyards Administration (Packers and Stockyards Programs); review and evaluation of program... books, records, and reports of persons subject to the Act; conduct investigations to determine the...

77 FR 33388 - Designation for the Topeka, KS; Cedar Rapids, IA; Minot, ND; and Cincinnati, OH Areas; Correction

Science.gov (United States)

2012-06-06

..., Packers and Stockyards Administration. ACTION: Notice; correction. SUMMARY: The U.S. Department of Agriculture, Grain Inspection, Packers and Stockyards Administration published a document in the Federal... and Stockyards Administration. [FR Doc. 2012-13646 Filed 6-5-12; 8:45 am] BILLING CODE 3410-KD-P ...

77 FR 76451 - Designation for the West Sacramento, CA; Frankfort, IN; and Richmond, VA Areas.

Science.gov (United States)

2012-12-28

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Designation for the West Sacramento, CA; Frankfort, IN; and Richmond, VA Areas. AGENCY: Grain Inspection, Packers and...-Agri West Sacramento, CA(916) 374-9700.. 1/1/2013 12/31/2015 Frankfort Frankfort, IN(765) 258-3624...

78 FR 18305 - Submission for OMB Review; Comment Request

Science.gov (United States)

2013-03-26

...: The Swine Packer Marketing Contracts, subtitle of the Livestock Mandatory Reporting Act of 1999... marketing contracts (swine contract library), and a monthly report of types of contracts in existence and... reporting of swine packer marketing contract information. Need and Use of the Information: Information is...

Drill pipe bridge plug

International Nuclear Information System (INIS)

Winslow, D.W.; Brisco, D.P.

1991-01-01

This patent describes a method of stopping flow of fluid up through a pipe bore of a pipe string in a well. It comprises: lowering a bridge plug apparatus on a work string into the pipe string to a position where the pipe bore is to be closed; communicating the pipe bore below a packer of the bridge plug apparatus through the bridge plug apparatus with a low pressure zone above the packer to permit the fluid to flow up through the bridge plug apparatus; engaging the bridge plug apparatus with an internal upset of the pipe string; while the fluid is flowing up through the bridge plug apparatus, pulling upward on the work string and the bridge plug apparatus and thereby sealing the packer against the pipe bore; isolating the pipe bore below the packer from the low pressure zone above the packer and thereby stopping flow of the fluid up through the pipe bore; disconnecting the work string from the bridge plug apparatus; and maintaining the bridge plug apparatus in engagement with the internal upset and sealed against the pipe bore due to an upward pressure differential applied to the bridge plug apparatus by the fluid contained therebelow

Plutella xylostella (L.) (Lepidoptera: Plutellidae): táticas para o manejo integrado em brássicas

OpenAIRE

Thuler, Robson Thomaz [UNESP

2006-01-01

O trabalho foi desenvolvido no Laboratório de Biologia e Criação de Insetos (LBCI) da FCAV-UNESP, para avaliar o efeito da interação entre resistência de cultivares de brássicas, inseticidas químicos e produtos vegetais e Trichogramma no controle de P/utella xy/ostella. Para tanto, avaliou-se a biologia de P. xy/ostella nas cultivares de repolho: Chato de Quintal (CQ), Midori (MD), Roxo Precoce (RP) e Híbrido Roxo (HR) e, nas cultivares de couve, Geórgia (CM) e Híbrido Geórgia HS20 (HS20) em ...

75 FR 16641 - Swine Contract Library

Science.gov (United States)

2010-04-02

...-AB06 Swine Contract Library AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA... Library (SCL). The statutory authority for the library lapsed on September 30, 2005. On October 5, 2006... maintenance of a library of marketing contracts offered by certain packers to producers for the purchase of...

9 CFR 201.3 - Authority.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Authority. 201.3 Section 201.3 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND STOCKYARDS....3 Authority. The Administrator shall perform such duties as the Secretary may require in enforcing...

9 CFR 201.4 - Bylaws, rules and regulations, and requirements of exchanges, associations, or other...

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Bylaws, rules and regulations, and... 201.4 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND... of any exchange, association, or other organization, or any other valid law, rule or regulation, or...

Method and apparatus for injecting fluid

Energy Technology Data Exchange (ETDEWEB)

Hyde, W E

1966-07-05

A method and apparatus are described for injecting grouting material into porous, fractured, unconsolidated, or other formations, whose cohesion is to be increased and/or whose permeability is to be decreased. A tool for injecting the fluid consists of a packer and valves through which the pressurized fluid may pass from the interior of the tool to the packer to expand it. Another valve allows pressure fluid to be vented so as to allow contraction of the packer. A third valve allows a flow of pressurized flow out of the tool and into the material when a predetermined pressure within the tool has been attained. (9 claims)

7 CFR 59.200 - Definitions.

Science.gov (United States)

2010-01-01

... the individual packer's measurement to that reference point using an adjustment made by the Secretary... measurement to that reference point using an adjustment made by the Secretary) of the swine slaughtered during... market formula purchase. The term “other market formula purchase” means a purchase of swine by a packer...

77 FR 65662 - Request for Extension and Revision of a Currently Approved Information Collection

Science.gov (United States)

2012-10-30

... Contract Library are essential to maintaining the mandatory library of swine marketing contracts and... additional one-time set up burden of 1 hour at a cost of $60 per plant for a packer that chose to create a... be high due to the need to use personnel with specialized computer skills. Respondents: Packers...

9 CFR 204.7 - Appeals.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Appeals. 204.7 Section 204.7 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND STOCKYARDS... person whose request under § 204.6 of this part is denied shall have the right to appeal such denial in...

9 CFR 205.205 - Fees.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Fees. 205.205 Section 205.205 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND STOCKYARDS... can be set in any manner provided by the law of the State in which such EFS is filed. The basis for...

9 CFR 201.1 - Meaning of words.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Meaning of words. 201.1 Section 201.1 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION (PACKERS AND... § 201.1 Meaning of words. Words used in this part in the singular form shall be deemed to import the...

Tool for treating subterranean wells

International Nuclear Information System (INIS)

Muller, L.; Randermann, E.

1991-01-01

This paper describes a system for treating subterranean wells. It comprises: elongated treatment tool having inflatable packers, a support tube connected to one end of the tool operable to lower tool from a well head into a well and to supply liquid to tool, the tool providing valve means operable in response changes in tension ins aid tube and without rotating the tube sequentially: (a) inflate the packers to isolate one portion of the from the remaining portions thereof and to lock the against movement along the well; (b) inject treatment fluid supplied to the tool through support tube into the one portion of the well and (c) deflate the packers permitting further movement of tool along the well

Results of sampling and analysis of groundwater from multi-packered boreholes OL-KR1, OL-KR3, OL-KR5, OL-KR9, OL-KR11 and OL-KR12 at Olkiluoto, Eurajoki, in 2004

Energy Technology Data Exchange (ETDEWEB)

Hirvonen, H. [Teollisuuden Voima Oyj, Eurajoki (Finland); Hatanpaeae, E. [lnsinoeoeritoimisto Paavo Ristola Oy, Hollola (Finland)

2005-12-15

Nine groundwater samples were collected at Olkiluoto from deep multi-packered boreholes OL-KR1, OL-KR3, OL-KR5, OL-KR9, OL-KR11 and OL-KR12 between spring 2004 and the beginning of 2005. The aim of the ground water sampling was to get information for the basis of the monitoring program (OMO) during ONKALO construction. Sampling sections were mainly chosen so that the results of the chemical analyses from earlier studies could be used for comparison. This study presents the sampling methods and the results of the laboratory analyses of groundwater samples from the deep multi-packered boreholes OL-KR1 (151.2-156.8 m, 311.2-336.8 m and 524.4-528.4 m), OL-KR3 (242.6-253.2 m), OL-KR5 (277.2-284.6 m and 457.2-476.2 m), OL-KR9 (468.2-482.2 m), OL-KR11 (597.5-628.1 m) and OLKR12 (363-368 m). The analytical results of the groundwater samplings are compared to earlier analytical results. According to Davis and De Wiest's (1967) classification, the collected groundwater samples represent either the borehole water type Na-Cl (OL-KR1/T/151.2-156.8 m, OLK-R1/ T/311.2-336.8 m, OL-KR3/T/242.6-253.2 m, OL-KR5/T/277.2-284.6 m, OL-KR11/ T/597.5-628.1 m and OL-KR12/T/363-368 m) or Na-Ca-Cl (OL-KR1/T/524.4- 528.4 m, OL-KR5/T/457.2-476.2 m and OL-KR9/T/468.2-482.2 m). The groundwater samples from OL-KR1/T/151.2-156.8 m, OL-KR3/T/242.6- 253.2 m, OL-KR3/T/242.6-253.2 m, OL-KR5/T/277.2-284.2 m, OL-KR11/T/597.5-628.1 m and OL-KR12/T/363-368 m were brackish (1000 mg/L < TDS < 10000 mg/L) according to Davis's (1964) TDS classification. Other samples (OL-KR1/T/524.4-528.4 m, OL-KR5/ T/457.2-476.2 m and OL-KR9/T/468.2-482.2 m), were saline (TDS> 10000 mg/L). Comparison of analytical results of the samples to earlier results shows that some changes were seen between samplings done at the different times. Only the groundwater sampled from OL-KR1/T/311.2-336.8 m had significant changes in its chemical composition during the reference period, but also in OL-KR1/T/524.4-528.4 m, OL-KR5/ T

Capacidade reprodutiva e preferência da traça-das-crucíferas para diferentes brassicáceas Reproductive capacity and preference of the diamondback moth feeding on different brassicacea

Directory of Open Access Journals (Sweden)

Sergio A De Bortoli

2011-06-01

Full Text Available O objetivo desta pesquisa foi comparar diferentes cultivares de brassicáceas em relação à capacidade reprodutiva e preferência para alimentação e oviposição da traça-das-crucíferas. Os experimentos foram realizados utilizando-se as cultivares de repolho Midori, Chato-de-Quintal, híbridos da Top Seed® - Agristar (TPC 308, TPC 681 e TPC 668, couve-flor Bola de Neve, couve brócolis Ramoso Piracicaba Precoce e couve Manteiga da Geórgia, sendo esta última utilizada como padrão de suscetibilidade. Por meio dos dados biológicos de P. xylostella foram estimados os parâmetros necessários para a construção de tabela de vida de fertilidade, para comparação das cultivares testadas em relação à capacidade reprodutiva da praga. Em gaiolas de criação da traça-das-crucíferas foram colocados quatro quartos de folha, dois a dois, que justapostos formavam um círculo de 8 cm de diâmetro, confrontando-se os materiais dois a dois. As partes foram dispostas equidistantemente, para realização do teste de dupla chance de escolha (preferência para alimentação e oviposição e de múltipla chance de escolha, confrontando todos os substratos (preferência para alimentação. As cultivares que proporcionaram melhor desenvolvimento e reprodução para a traça-das-crucíferas foram couve Manteiga da Geórgia e couve brócolis. Para preferência alimentar constatou-se alta suscetibilidade em couve Manteiga e TPC 681 e para preferência de oviposição alta preferência para couve-flor Bola de Neve. Com isso, sugere-se a divisão das cultivares estudadas em quatro classes distintas: repolho Midori como moderadamente resistente (MR; couve-flor Bola de Neve e repolho Chato-de-Quintal como suscetíveis (S; couve brócolis, TPC308, TPC681 e TPC668 como moderadamente suscetíveis (MS; e couve Manteiga como altamente suscetível (AS.We compared different cultivars of crucifer in relation to reproductive capacity and preference for feeding and

“Drug mules” as a radiological challenge: Sensitivity and specificity in identifying internal cocaine in body packers, body pushers and body stuffers by computed tomography, plain radiography and Lodox

Energy Technology Data Exchange (ETDEWEB)

Flach, Patricia M., E-mail: patricia.flach@irm.uzh.ch [Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Bern, Buehlstrasse 20, 3012 Bern (Switzerland); Department of Neuroradiology, Inselspital Bern, University of Bern, 3010 Bern (Switzerland); Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Zurich, Winterthurerstrasse 190/52, 8057 Zurich (Switzerland); Department of Radiology, University Hospital USZ, University of Zurich, Raemistrasse 100, 8091 Zurich (Switzerland); Ross, Steffen G. [Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Bern, Buehlstrasse 20, 3012 Bern (Switzerland); Ampanozi, Garyfalia; Ebert, Lars [Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Bern, Buehlstrasse 20, 3012 Bern (Switzerland); Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Zurich, Winterthurerstrasse 190/52, 8057 Zurich (Switzerland); Germerott, Tanja; Hatch, Gary M. [Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Bern, Buehlstrasse 20, 3012 Bern (Switzerland); Thali, Michael J. [Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Bern, Buehlstrasse 20, 3012 Bern (Switzerland); Centre for Forensic Imaging and Virtopsy, Institute of Forensic Medicine, University of Zurich, Winterthurerstrasse 190/52, 8057 Zurich (Switzerland); Patak, Michael A. [Department of Radiology, Inselspital Bern, University of Bern, 3010 Bern (Switzerland); Department of Radiology, University Hospital USZ, University of Zurich, Raemistrasse 100, 8091 Zurich (Switzerland)

2012-10-15

Purpose: The purpose of our study was to retrospectively evaluate the specificity, sensitivity and accuracy of computed tomography (CT), digital radiography (DR) and low-dose linear slit digital radiography (LSDR, Lodox{sup ®}) in the detection of internal cocaine containers. Methods: Institutional review board approval was obtained. The study collectively consisted of 83 patients (76 males, 7 females, 16–45 years) suspected of having incorporated cocaine drug containers. All underwent radiological imaging; a total of 135 exams were performed: nCT = 35, nDR = 70, nLSDR = 30. An overall calculation of all “drug mules” and a specific evaluation of body packers, pushers and stuffers were performed. The gold standard was stool examination in a dedicated holding cell equipped with a drug toilet. Results: There were 54 drug mules identified in this study. CT of all drug carriers showed the highest diagnostic accuracy 97.1%, sensitivity 100% and specificity 94.1%. DR in all cases was 71.4% accurate, 58.3% sensitive and 85.3% specific. LSDR of all patients with internal cocaine was 60% accurate, 57.9% sensitive and 63.4% specific. Conclusions: CT was the most accurate test studied. Therefore, the detection of internal cocaine drug packs should be performed by CT, rather than by conventional X-ray, in order to apply the most sensitive exam in the medico-legal investigation of suspected drug carriers. Nevertheless, the higher radiation applied by CT than by DR or LSDR needs to be considered. Future studies should include evaluation of low dose CT protocols in order to address germane issues and to reduce dosage.

“Drug mules” as a radiological challenge: Sensitivity and specificity in identifying internal cocaine in body packers, body pushers and body stuffers by computed tomography, plain radiography and Lodox

International Nuclear Information System (INIS)

Flach, Patricia M.; Ross, Steffen G.; Ampanozi, Garyfalia; Ebert, Lars; Germerott, Tanja; Hatch, Gary M.; Thali, Michael J.; Patak, Michael A.

2012-01-01

Purpose: The purpose of our study was to retrospectively evaluate the specificity, sensitivity and accuracy of computed tomography (CT), digital radiography (DR) and low-dose linear slit digital radiography (LSDR, Lodox ® ) in the detection of internal cocaine containers. Methods: Institutional review board approval was obtained. The study collectively consisted of 83 patients (76 males, 7 females, 16–45 years) suspected of having incorporated cocaine drug containers. All underwent radiological imaging; a total of 135 exams were performed: nCT = 35, nDR = 70, nLSDR = 30. An overall calculation of all “drug mules” and a specific evaluation of body packers, pushers and stuffers were performed. The gold standard was stool examination in a dedicated holding cell equipped with a drug toilet. Results: There were 54 drug mules identified in this study. CT of all drug carriers showed the highest diagnostic accuracy 97.1%, sensitivity 100% and specificity 94.1%. DR in all cases was 71.4% accurate, 58.3% sensitive and 85.3% specific. LSDR of all patients with internal cocaine was 60% accurate, 57.9% sensitive and 63.4% specific. Conclusions: CT was the most accurate test studied. Therefore, the detection of internal cocaine drug packs should be performed by CT, rather than by conventional X-ray, in order to apply the most sensitive exam in the medico-legal investigation of suspected drug carriers. Nevertheless, the higher radiation applied by CT than by DR or LSDR needs to be considered. Future studies should include evaluation of low dose CT protocols in order to address germane issues and to reduce dosage

Drug-related deaths with evidences of body packing: Two case reports and medico-legal issues.

Science.gov (United States)

Cappelletti, Simone; Aromatario, Mariarosaria; Bottoni, Edoardo; Fiore, Paola Antonella; Straccamore, Marco; Umani Ronchi, Federica; De Mari, Guido Maria; Ciallella, Costantino

2016-05-01

Body packing is a general term used to indicate the internal transportation of drug packages, mainly cocaine, heroin, amphetamines, and methamphetamine, within the gastrointestinal tract. We described two cases of accidental drug intoxication, observed over the last year period, with evidence of intracorporeal drug concealment. The first case concerned a body packer transporting 69 drug packages of heroin adulterated with piracetam. The second body packer transported 16 drug packages of cocaine adulterated with levamisole. For both cases, forensic examination and toxicological analysis of drug packages and biological samples were carried out. Authors also wants to highlight the main medico-legal issues that commonly arise in cases of suspected or ascertained body packers. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Three new species of Neofidelia (Hymenoptera: Apoidea: Megachilidae) from Northern Chile.

Science.gov (United States)

Dumesh, Sheila; Packer, Laurence

2013-02-01

Neofidelia apacheta Dumesh and Packer, sp. nov., N. camanchaca Dumesh and Packer, sp. nov., and N. submersa Dumesh and Packer, sp. nov. are described from northern Chile. Neofidelia apacheta is known from large numbers of specimens and localities at moderately high elevation (1600-3200m). Neofidelia camanchaca is only known from the ho-lotype male. Neofidelia submersa is known from the holotype male and a pair of paratypes in poor condition, all from a coastal fog oasis. Comparisons are made with the two previously described species of the genus. The collection of N. apa-cheta from so far north in Chile suggests that Neofidelia is likely to be found in southern Peru. A key for the five species of the genus is provided.

Equipment for hydraulic testing

International Nuclear Information System (INIS)

Jacobsson, L.; Norlander, H.

1981-07-01

Hydraulic testing in boreholes is one major task of the hydrogeological program in the Stripa Project. A new testing equipment for this purpose was constructed. It consists of a downhole part and a surface part. The downhole part consists of two packers enclosing two test-sections when inflated; one between the packers and one between the bottom packer and the bottom of the borehole. A probe for downhole electronics is also included in the downhole equipment together with electrical cable and nylon tubing. In order to perform shut-in and pulse tests with high accuracy a surface controlled downhole valve was constructed. The surface equipment consists of the data acquisition system, transducer amplifier and surface gauges. In the report detailed descriptions of each component in the whole testing equipment are given. (Auth.)

7 CFR 989.14 - Packer.

Science.gov (United States)

2010-01-01

... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE RAISINS PRODUCED FROM GRAPES GROWN IN..., only if he stems, cleans with water subsequent to such dehydration, seeds or packages them for market...

Current merchandising practices and characteristics of beef wholesale rib usage in three U.S. cities.

Science.gov (United States)

Wulf, D M; Romans, J R; Costello, W J

1994-01-01

Packers/processors, supermarket meat managers, and restaurant meat purchasers were surveyed to determine industry utilization of the beef wholesale rib. Nine packer/processors representing > 52% of the U.S. steer-heifer slaughter reported that more than two-thirds (68.5%) of the ribs were wholesaled as ribeye, lip-on (IMPS 112A) subprimals and that its predominance in the market makes it the standard for pricing. For merchandising variations of this cut (e.g., ribeye, lip-off), packer prices are adjusted to lip-on bases according to the relative yield. Excess fat was the most common complaint about ribeye steaks, reported by 78% of the packer/processors. In particular, 71% of them reported the "kernel" fat near the center of a ribeye steak between the longissimus and spinalis dorsi muscles is quite difficult to trim out and represents the greatest problem in merchandising. Forty-two percent of supermarket meat managers and 58% of restaurant meat purchasers thought the fat content of beef ribeyes discouraged consumers from purchasing all beef. Kernel fat was specifically cited by 36% of the restaurateurs. Alternative merchandising strategies should be employed to minimize the negative value effects of kernel fat. Even with excess fat being a concern to approximately half of the beef rib buyers, most still bought lip-on ribeyes and trimmed excess fat away. Apparently, they made this choice of lower price per weight, even though price per trimmed serving might be similar to lip-off ribeyes. Excess fat is being transported from packer/processor to buyers in the form of lip-on ribeyes because of the price relationships.(ABSTRACT TRUNCATED AT 250 WORDS)

In situ determination of anisotropic permeability of clay

International Nuclear Information System (INIS)

Shao, H.; Soennke, J.; Morel, J.; Krug, S.

2011-01-01

Argillaceous formations are being considered as potential host rocks for repositories of radioactive waste in many countries. For this purpose, the thermal, hydraulic, mechanical, and chemical properties of the clay stone are being widely investigated in the laboratories and in situ. However, clay stone behaves, due to its tectonic evolution of the formation, hydraulically and mechanically transversal isotropic. Argillite bedding or layering structure has been observed in the underground laboratories Mont Terri in the Switzerland and Meuse/Haute-Marne at Bure site in France. Conventional packer systems used for the borehole hydraulic characterisation cannot distinguish the difference between the properties parallel and perpendicular to the bedding. For this purpose, a new 'slot packer' system has been developed by the BGR. This type of new packer system is intensively tested in the BGR laboratory and the Mont Terri Rock Laboratory to judge the feasibility. The anisotropic ratio of the Opalinus clay defined by permeability value parallel to the bedding/permeability value perpendicular to the bedding is evaluated up to eight times to one order of magnitude within the HG-B experiment in the Mont Terri Rock Laboratory. Within the cooperation between BGR and ANDRA, the 'slot packer' will be used for the measurement of anisotropic permeability of the Callovo-Oxfordian formation at the Bure site. (authors)

New experiences in borehole dilution techniques

International Nuclear Information System (INIS)

Umesh Chandra

1977-01-01

A study of filtration rate and direction of groundwater flow was made at various depths in borehole using bromine-82 as groundwater tracer. The filtration rates were found to vary along the depth of borehole. Vertical flow in the borehole was observed in an alluvial aquifer even after sealing the borehole by rubber packers. The filtration rates, obtained without the packer at various depths, were much less than those obtained with packer. Microscopic hydrological information was obtained around the borehole which was useful in planning a drainage system in the area. A depth was located in the borehole where vertical flow was in opposite directions. At another depth a zone of horizontal flow was observed where vertical flow was in opposite directions. The improved instrumentation used rendered the field work extremely easy quick and readily reproducible. (author)

Method of hydrospalling

International Nuclear Information System (INIS)

Oudenhoven, M.S.

1983-01-01

A method is disclosed of breaking rock from a free surface which uses hydrofracturing to induce rock failure. Initially, a hole is cut in the rock face to a depth suitable for spalling by a high pressure water jet drill. Next, at the bottom of this hole a thin circular slot is hydraulically cut into the rock. The slot's circular axis is cut parallel to the transverse axis of the hole and the slot is made larger than the hole diameter. Following this step, a high pressure packer, with a high pressure tube passing through its center, is inserted into the drill hole. This packer is placed near the bottom of the hole above the slot and inflated. A fluid, like water, under high pressure is pumped down the hole past the packer into the slotted area. This high pressure fluid initiates a tensile fracture in the rock at the circular periphery of the slot. Tension is induced in the rock at this peripheral location due to the small radius of curvature existing there. This circular tensile fracture propagates outward away from the drill hole and upward to the free rock surface. After the rock fragment is broken free, pressure is released from the packer and it is withdrawn from the hole letting the fragment drop. To advance through the rock, the process is continuously repeated with the high pressure fluid being applied to the slotted area over a very short time period

Characterizing Hydraulic Properties and Ground-Water Chemistry in Fractured-Rock Aquifers: A User's Manual for the Multifunction Bedrock-Aquifer Transportable Testing Tool (BAT3)

Science.gov (United States)

Shapiro, Allen M.

2007-01-01

A borehole testing apparatus has been designed to isolate discrete intervals of a bedrock borehole and conduct hydraulic tests or collect water samples for geochemical analyses. This borehole testing apparatus, referred to as the Multifunction Bedrock-Aquifer Transportable Testing Tool (BAT3), includes two borehole packers, which when inflated can form a pressure-tight seal against smooth borehole walls; a pump apparatus to withdraw water from between the two packers; a fluid-injection apparatus to inject water between the two packers; pressure transducers to monitor fluid pressure between the two packers, as well as above and below the packers; flowmeters to monitor rates of fluid withdrawal or fluid injection; and data-acquisition equipment to record and store digital records from the pressure transducers and flowmeters. The generic design of this apparatus was originally discussed in United States Patent Number 6,761,062 (Shapiro, 2004). The prototype of the apparatus discussed in this report is designed for boreholes that are approximately 6 inches in diameter and can be used to depths of approximately 300 feet below land surface. The apparatus is designed to fit in five hard plastic boxes that can be shipped by overnight freight car-riers. The equipment can be assembled rapidly once it is removed from the shipping boxes, and the length of the test interval (the distance between the two packers) can be adjusted to account for different borehole conditions without reconfiguring the downhole components. The downhole components of the Multifunction BAT3 can be lowered in a borehole using steel pipe or a cable; a truck mounted winch or a winch and tripod can be used for this purpose. The equipment used to raise and lower the downhole components of the Multifunction BAT3 must be supplied on site, along with electrical power, a compressor or cylinders of compressed gas to inflate the packers and operate downhole valves, and the proper length of tubing to connect the

[Smuggling of illegal drugs by body suffers].

Science.gov (United States)

Aksnes, Tonje Amb; Jacobsen, Dag

2004-07-01

Body packers are persons who smuggle illegal drugs by swallowing condoms or plastic cylinders containing such substances. Body stuffers are drug dealers or drug abusers who swallow illegal drugs in an effort to conceal evidence during an arrest or in fear of being arrested. We report four cases and discuss management. Asymptomatic body packers may be managed conservatively with laxatives and water-soluble contrast medium. This method allows an accurate follow-up with abdominal radiography. If patients develop abdominal pain or signs and symptoms of intoxication, surgical intervention should be considered. Both types of patients should be monitored carefully.

Cocaine smuggling in the gastrointestinal tract resulting in mechanical pylorostenosis.

Science.gov (United States)

Sein Anand, Jacek; Chodorowski, Zygmunt; Masal, Andrzej; Nowak-Banasik, Livia

2005-01-01

A 45-year-old male, body packer, who confessed to have swallowed 44 packages of cocaine in a total dose of approx. 360 g, was admitted to hospital because of clinical signs of acute intoxication with cocaine followed by ileus. The emergency surgical gastrotomy was initiated, and the conglomerate of Scotch tape and packages with cocaine were removed. Small rupture of one package of cocaine in a body packer stomach caused acute poisoning with cocaine, confirmed additionally by the presence of its metabolites in the urine. Mechanical pylorostenosis provoked by cocaine packages required emergency surgical operation.

Pipeline leak detection method and control device therefor

International Nuclear Information System (INIS)

Bell, D.A.

1983-01-01

Leaks may be located in a pipeline by introducing into the pipeline an assembly that includes a pipe-sealing packer unit, a control unit, and a radioactive source shielded from the control unit. The control unit includes a gamma ray detector that controls the sealing and unsealing of the pipe by the packer in response to the detection of radiation exceeding a preset threshold - a detection event. The assembly is pushed through the pipeline by a relatively low fluid pressure behind it. The progress of the assembly through the pipeline may be monitored externally by a gamma ray detector

Heating production fluids in a wellbore

Science.gov (United States)

Orrego, Yamila; Jankowski, Todd A.

2016-07-12

A method for heating a production fluid in a wellbore. The method can include heating, using a packer fluid, a working fluid flowing through a first medium disposed in a first section of the wellbore, where the first medium transfers heat from the packer fluid to the working fluid. The method can also include circulating the working fluid into a second section of the wellbore through a second medium, where the second medium transfers heat from the working fluid to the production fluid. The method can further include returning the working fluid to the first section of the wellbore through the first medium.

Identifications of Opium and Heroin Body Packing by Medical Imaging in the Poisoned and Non-poisoned Drug Smuggler

International Nuclear Information System (INIS)

Balali-Mood, M.; Zare, G.

2007-01-01

Opium and heroin body packing is a social and health problem in Mashhad since the city is in the vicinity of Afghanistan border. We aimed to compare abdominal X-ray (AXR) and computed tomography (CT) scan for diagnosis. All body packers referred to the center between 2003 and 2006 were hospitalized. Defecation of packets was considered as the gold standard for diagnosis. AXR and CT scan results were classified into 3 groups (highly suggestive, suggestive, and false positive) and compared with each other, using Chi-Square test. A total of 56 body packers (54 M and 2 F) aged 32.1 ± 11.3 years were studied. A mean of 44.4 ± 35.1 opium and 52.0 ± 20.0 heroin packets weighed 8-15 g were retrieved from 46 and 10 patients, respectively. Mean period of hospitalization was 4.7 ± 2.7 and 4.1 ± 0.6 days for opium and heroin packers, respectively. Urine morphine test was positive in 82 percent of the patients. Nine patients underwent surgical operation and death occurred in only 3 opium packers. AXR and CT scan results were significantly different (p less than 0.001) in terms of highly suggestive (16 and 40), suggestive (36 and 1) and false negative (4 and 0), respectively. However, sensitivity of AXR and CT scan in diagnosis of body packing was determined as 92 percent and 100 percent, respectively. Although AXR is a simple and more available technique for the diagnosis of opium and heroin body packing, CT scan revealed more significant sensitive diagnostic tool and should be employed as the confirmatory method.(author)

DEATH FROM BODY PACKER SYNDROME: CASE REPORT ...

African Journals Online (AJOL)

hi-tech

2004-04-04

Apr 4, 2004 ... There were no other significant positive anatomical findings from the autopsy. Postmortem toxicological findings: Toxicological analyses by gas chromatography were performed on postmortem femoral blood, gastric and duodenal contents, liver and kidney extracts by the Government. Chemist Department.

Summary of three dimensional pump testing of a fractured rock aquifer in the western Siberian Basin

International Nuclear Information System (INIS)

Nichols, R.L.; Looney, B.B.; Eddy-Dilek, C.A.; Drozhko, E.G.; Glalolenko, Y.V.; Mokrov, Y.G.; Ivanov, I.A.; Glagolev, A.V.; Vasil'kova, N.A.

1996-01-01

A group of scientists from the Savannah River Technology Center and Russia successfully completed a 17 day field investigation of a fractured rock aquifer at the MAYAK PA nuclear production facility in Russia. The test site is located in the western Siberian Basin near the floodplain of the Mishelyak river. The fractured rock aquifer is composed of orphyrites, tuff, tuffbreccia and lava and is overlain by 0.5--12 meters of elluvial and alluvial sediments. A network of 3 uncased wells (176, 1/96, and 2/96) was used to conduct the tests. Wells 176 and 2/96 were used as observation wells and the centrally located well 1/96 was used as the pumping well. Six packers were installed and inflated in each of the observation wells at a depth of up to 85 meters. The use of 6 packers in each well resulted in isolating 7 zones for monitoring. The packers were inflated to different pressures to accommodate the increasing hydrostatic pressure. A straddle packer assembly was installed in the pumping well to allow testing of each of the individual zones isolated in the observation wells. A constant rate pumping test was run on each of the 7 zones. The results of the pumping tests are included in Appendix A. The test provided new information about the nature of the fractured rock aquifers in the vicinity of the Mishelyak river and will be key information in understanding the behavior of contaminants originating from process wastes discharged to Lake Karachi. Results from the tests will be analyzed to determine the hydraulic properties of different zones within the fractured rock aquifer and to determine the most cost effective clean-up approach for the site

75 FR 68315 - Notice of Request for Extension of a Currently Approved Information Collection

Science.gov (United States)

2010-11-05

.... Type of Request: Extension and revision of a currently approved information collection. Abstract: The... contacts, including packers, processors, producers, brokers, and retailers. These reports are compiled on a...

Fruit Sorter (agric.; can. & preserv.; whole tr.) 9-68.60; Cherry Sorter 9-68.60; Olive Sorter 9-68.60; Packer (agric.) 9-68.35; Apple Packer 9-68.35; Cherry Packer 9-68.35; Citrus-Fruit Packer 9-68.35; Plum Packer 9-68.35 -- Technical Report on Standardization of the General Aptitude Test Battery.

Science.gov (United States)

Manpower Administration (DOL), Washington, DC. U.S. Training and Employment Service.

The United States Training and Employment Service General Aptitude Test Battery (GATB), first published in 1947, has been included in a continuing program of research to validate the tests against success in many different occupations. The GATB consists of 12 tests which measure nine aptitudes: General Learning Ability; Verbal Aptitude; Numerical…

78 FR 59647 - Opportunity for Designation in Unassigned Areas of Southeast Texas

Science.gov (United States)

2013-09-27

...The Grain Inspection, Packers and Stockyards Administration (GIPSA) is asking persons or governmental agencies interested in providing official services in unassigned areas of Southeast Texas to submit an application for designation.

WIPP Salado hydrology program data report No. 1

International Nuclear Information System (INIS)

Saulnier, G.J. Jr.; Domski, P.S.; Palmer, J.B.; Roberts, R.M.; Stensrud, W.A.; Jensen, A.L.

1991-05-01

WIPP Salado Hydrology Program Data Report number-sign 1 presents hydrologic data collected during permeability tests of the Salado Formation performed from August 1988 through December 1989. Analysis and interpretation of the test data are presented in a separate report. The report presents the results of the drilling and testing of six boreholes drilled from the WIPP underground facility 655 m below ground surface in the Salado Formation. Permeability tests were conducted using multipacker test tools with inflatable packers to isolate borehole intervals to allow formation pore-pressure buildup and subsequent pulse-withdrawal tests. Test data include pressures and temperatures in brine-filled, packer-isolated test intervals and borehole-closure and axial test-tool-movement measurements. Permeability tests were performed after installing multipacker test tools in test boreholes, inflating the packers, and allowing pressures to build up in the isolated intervals. Pulse-withdrawal tests were performed after buildup pressures approached the apparent formation pore pressure. Pulse injections were sometimes performed to increase the fluid pressures in isolated intervals. Compliance tests were conducted in lengths of steel and stainless-steel casing to evaluate the mechanical performance of the multipacker test tools. The stainless-steel compliance-test chamber was installed with externally mounted thermocouples in a downward-angled borehole in Experimental Room 4. Compliance tests included leak tests and simulated pulse-injection and pulse-withdrawal sequences. 9 refs., 143 figs., 2 tabs

75 FR 21366 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-04-23

...). 73810 Gaming Partners Las Vegas, NV......... 03/30/10 03/25/10 International, USA (Company). 73811 Schrupp Industries, Inc. Packer, PA 03/30/10 03/26/10 (Workers). 73812 Johnson Controls, Inc. Rockwood, MI...

30 CFR 250.402 - When and how must I secure a well?

Science.gov (United States)

2010-07-01

... install a downhole safety device, such as a cement plug, bridge plug, or packer. You must install the.... (b) For floating drilling operations, the District Manager may approve the use of blind or blind...

regiment mooirivier and operations modular, hooper, packer a

African Journals Online (AJOL)

Gerhard Oosthuizen

1987-12-09

Dec 9, 1987 ... This article critically examines the claim made by General Jannie .... were to fail, UNITA had to launch an attack, with the support of indirect SADF fire support. .... for Cuito Cuanavale to resume its service as a convoy defender.43 ..... cannons. Müller therefore decided to withdraw to a safe area with a view to.

Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

Directory of Open Access Journals (Sweden)

Nilvanira Donizeti Tebaldi

2007-12-01

Full Text Available A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica foram avaliados, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre" inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica de sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento de plântulas e massa seca. De acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.The detection, transmission and the effect of Xanthomomas campestris pv. campestris (Xcc in the physiological quality of broccoli seeds were evaluated. The seeds were obtained from inoculated field plants (`Baron', `Flórida', `Hana Midori Sakata', `Precoce Piracicaba de Verão', `Ramoso Santana' and `Sabre' genotypes with the bacterium. For the seed pathogen detection the semi-selective medium were used: starch for xanthomonads (SX agar, nutrient starch cycloheximide antibiotic agar (NSCAA and basal starch cycloheximide antibiotic agar (BSCAA; the bacteria seeds transmission percentage was evaluated using sand and test tube. The physiological seed quality was evaluated by the standard germination and vigor tests: the accelerated aging, speed of emergence, seedling growth and seedling dry weight. The

Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis Detection, transmission and effect of Xanthomonas campestris pv. campestris in the physiological quality of broccoli seeds

Directory of Open Access Journals (Sweden)

Nilvanira Donizete Tebaldi

2007-09-01

Full Text Available A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica foram avaliadas, a partir de sementes obtidas de plantas ("Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre" inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica das sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento das plântulas e massa seca. De acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.The detection, transmission and the effect of Xanthomomas campestris pv. campestris (Xcc in the physiological quality of broccoli seeds were evaluated. The seeds were obtained from inoculated field plants ('Baron', 'Flórida', 'Hana Midori Sakata', 'Precoce Piracicaba de Verão', 'Ramoso Santana' and 'Sabre' genotypes with the bacterium. For the seed pathogen detection the semi-selective medium were used: starch for xanthomonads (SX agar, nutrient starch cycloheximide antibiotic agar (NSCAA and basal starch cycloheximide antibiotic agar (BSCAA; the bacteria seeds transmission percentage was evaluated using sand and test tube. The physiological seed quality was evaluated by the standard germination and vigor tests: the accelerated aging, speed of emergence, seedling growth and seedling dry weight

9 CFR 201.2 - Terms defined.

Science.gov (United States)

2010-01-01

... Proceedings under the Packers and Stockyards Act, 9 CFR part 202; Statements of General Policy under the... definition of “stockyard” under section 302(a) of the Act. (j) Schedule means a tariff of rates and charges...

Biological and technological effects of some mulberry varieties and ...

African Journals Online (AJOL)

egyptian hak

The major sources of aluminum include air, food and water (Michel 1990), and ... Vitamin C is essential for the formation of collagen and intracellular material, ..... Packer L (1993) Vitamin E: biological activity and health benefits: Overview. p.

7 CFR 801.10 - [Reserved

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false [Reserved] 801.10 Section 801.10 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.10 [Reserved] ...

Field-scale permeation testing of jet-grouted buried waste sites

International Nuclear Information System (INIS)

Loomis, G.G.; Zdinak, A.P.

1996-01-01

The Idaho National Engineering Laboratory (INEL) conducted field-scale hydraulic conductivity testing of simulated buried waste sites with improved confinement. The improved confinement was achieved by jet grouting the buried waste, thus creating solid monoliths. The hydraulic conductivity of the monoliths was determined using both the packer technique and the falling head method. The testing was performed on simulated buried waste sites utilizing a variety of encapsulating grouts, including high-sulfate-resistant Portland cement, TECT, (a proprietary iron oxide cement) and molten paraffin. By creating monoliths using in-situ jet grouting of encapsulating materials, the waste is simultaneously protected from subsidence and contained against further migration of contaminants. At the INEL alone there is 56,000 m 3 of buried transuranic waste commingled with 170,000--224,000 m 3 of soil in shallow land burial. One of the options for this buried waste is to improve the confinement and leave it in place for final disposal. Knowledge of the hydraulic conductivity for these monoliths is important for decision-makers. The packer tests involved coring the monolith, sealing off positions within the core with inflatable packers, applying pressurized water to the matrix behind the seal, and observing the water flow rate. The falling head tests were performed in full-scale 3-m-diameter, 3-m-high field-scale permeameters. In these permeameters, both water inflow and outflow were measured and equated to a hydraulic conductivity

[Cocaine smuggling in the gastrointestinal tract--the case report with the review of literature].

Science.gov (United States)

Ciszowski, Krzysztof; Hydzik, Piotr; Waldman, Wojciech; Sein Anand, Jacek

2005-01-01

Body-packing is the way of psychoactive substances smuggling by swallowing of carefully prepared packages with drugs into the gastrointestinal tract or by insertion them into the vagina or the rectum, especially in order to avoid finding them by the custom service. Cocaine, as well as opiates, is the one of the most often smuggled drugs by so called body-packers. In the present study the first case of the body-packer from Malopolska region in Poland, who was observed in the Toxicology Department of the Collegium Medicum UJ, was described. The 29-year-old man swallowed 60 packages containing cocaine with a total net weight of about 500 grams. The plain abdominal radiography revealed multiple shadows of foreign bodies in the gastrointestinal tract, but the results of blood and urine cocaine measurements were negative. During the 37-hours stay in our department the patient was monitored (blood pressure, heart rate, temperature), laxatives and oral fluids were administered. All the packages were evacuated through the natural way and it was followed up by the control abdominal radiography. No symptoms of acute cocaine intoxication or any other complications were observed. According to the case there is also the thorough review of literature presented including the kinds of body-packing, the diagnostic methods used in recognizing of body-packers and the ways of their treatment taking into consideration the conservative management as well as surgical methods.

7 CFR 1212.55 - Prohibition on use of funds.

Science.gov (United States)

2010-01-01

... behalf of honey or honey products. (4) Any advertising, including promotion, research and information... RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Honey Packers and Importers Research... results of promotion, research, consumer information, education, industry information, or producer...

Heart Failure in the Elderly

NARCIS (Netherlands)

B. Cost (Bernard)

2000-01-01

textabstractHeart failure is a clinical syndrome with various causes for which no universally accepted definition exists. Packer's definition of heart failure "representing a complex clinical syndrome characterised by abnonnalities of left ventricular function and neurohumoral regulation. which are

Maximum likelihood Bayesian averaging of airflow models in unsaturated fractured tuff using Occam and variance windows

NARCIS (Netherlands)

Morales-Casique, E.; Neuman, S.P.; Vesselinov, V.V.

2010-01-01

We use log permeability and porosity data obtained from single-hole pneumatic packer tests in six boreholes drilled into unsaturated fractured tuff near Superior, Arizona, to postulate, calibrate and compare five alternative variogram models (exponential, exponential with linear drift, power,

77 FR 16951 - Livestock Mandatory Reporting Program; Establishment of the Reporting Regulation for Wholesale Pork

Science.gov (United States)

2012-03-23

... the Major Provisions of the Regulatory Action in Question This proposed rule requires packers to... quantify, therefore, this analysis considers benefits only on a qualitative basis. The qualitative benefits..., gender, religion, age, disability, sexual orientation, marital or family status, political beliefs...

7 CFR 800.17 - Special inspection and weighing requirements for sacked export grain.

Science.gov (United States)

2010-01-01

... sacked export grain. 800.17 Section 800.17 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE... Requirements § 800.17 Special inspection and weighing requirements for sacked export grain. (a) General...

7 CFR 800.99 - Checkweighing sacked grain.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Checkweighing sacked grain. 800.99 Section 800.99 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing...

7 CFR 810.804 - Grades and grade requirements for mixed grain.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Grades and grade requirements for mixed grain. 810.804 Section 810.804 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE...

7 CFR 800.97 - Weighing grain in containers, land carriers, barges, and shiplots.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Weighing grain in containers, land carriers, barges... (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Weighing Provisions and Procedures § 800.97 Weighing grain in...

7 CFR 800.30 - Foreign commerce grain business.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Foreign commerce grain business. 800.30 Section 800.30 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS Registration...

7 CFR 800.16 - Certification requirements for export grain.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Certification requirements for export grain. 800.16 Section 800.16 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL...

9 CFR 201.71 - Scales; accurate weights, repairs, adjustments or replacements after inspection.

Science.gov (United States)

2010-01-01

... contractors, market agencies, dealers, packers, and live poultry dealers to weigh livestock, livestock.... All approved material is available for inspection at the National Archives and Records Administration... http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. Also, it is...

Non-pineal supratentorial primitive neuro-ectodermal tumors (sPNET) in teenagers and young adults: Time to reconsider cisplatin based chemotherapy after cranio-spinal irradiation?

Science.gov (United States)

Biswas, Swethajit; Burke, Amos; Cherian, Sheen; Williams, Denise; Nicholson, James; Horan, Gail; Jefferies, Sarah; Williams, Michael; Earl, Helena M; Burnet, Neil G; Hatcher, Helen

2009-07-01

Supratentorial PNET (sPNET) are rare CNS tumors of embryonal origin arising in children and adults. The treatment of sPNET for all age groups at our cancer center has been based on the management of medulloblastoma (MB), involving neurosurgical debulking followed by cranio-spinal irradiation (CSI) and systemic chemotherapy. Medical records were reviewed to gather demographic and clinical data about all embryonal CNS tumors in children and adults from 2001 to 2007. Tumor pathology, clinical management and survival data were also assessed, particularly as regards those patients who received the Packer chemotherapy regimen for either sPNET or MB. Eleven patients (five children and six adults) were identified with non-pineal sPNET, three children with pineal sPNET, and 19 patients (18 children and 1 adult) with MB. There was no difference in overall survival (OS) rates between pediatric and adult sPNET. When all sPNET were compared to all MB, 5-year OS was 14% versus 73%, respectively, but was only 9% for non-pineal sPNET. When only considering those patients treated with the Packer chemotherapy regimen, the 5-year OS was 12% for sPNET versus 79% for MB. This retrospective study demonstrates that non-pineal sPNET are clinically distinct from MB and are resistant to the Packer chemotherapy regimen. We suggest that it is time to reconsider the use of this regimen in teenage and young adult non-pineal sPNET and to investigate the utility of alternative approaches. (c) 2009 Wiley-Liss, Inc.

Waste Isolation Pilot Plant Salado hydrology program data report No. 2

International Nuclear Information System (INIS)

Stensrud, W.A.; Dale, T.F.; Domski, P.S.; Palmer, J.B.; Roberts, R.M.; Fort, M.D.; Saulnier, G.J. Jr.; Jensen, A.L.

1992-12-01

WIPP Salado Hydrology Program Data Report number-sign 2 presents hydrologic data collected during permeability testing of the Salado Formation performed from August 1989 through July 1992. The report presents the results of the drilling and testing of six boreholes drilled from the WIPP underground facility 655 m below ground surface in the Salado Formation. Permeability tests were conducted using multipacker test tools with inflatable packers to isolate borehole intervals to allow formation pore-pressure buildup and subsequent pressure-pulse and constant-pressure-withdrawal tests. The tests performed in boreholes L4P51, L4P52, SCP01, S1P71, S1P72, an S1P73 involved Marker Beds 138 and 139, anhydrites ''a,'' ''b,'' and ''c,'' clays B, D, E, G, H, J, and K, and several halitic strata. Test data include pressure and temperature from the brine-filled, packer- isolated test intervals, fluid and gas production during constant- pressure-withdrawal tests, and borehole-closure and axial test tool- movement measurements. The boreholes were drilled and/or cored to nominal 10.2-cm diameters using compressed air to remove drill cuttings. Compliance tests were conducted in lengths of steel and stainless-steel casing to evaluate the mechanical performance of the multipacker test tools. Compliance tests included leak tests and pulse-injection and pulse-withdrawal sequences. Following permeability testing, fluid pressures were monitored in packer- isolated sections of test boreholes C2H01, C2H02, SCP01, SlP71, SlP72, DPD01, DPD02, and DPD03

Innovations in the oil industry

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

Developed in the Komineft' is a device for orienting a deflector in the columns of a well with a horizon angle of less than 5/sup 0/ with the use of series produced incline meters with an electromagnetic surveying compass. The device was successfully tested and introduced at the Pashninsk and Usinsk sites at depths of up to 2,300 m, both in drilling of slanted wells, as well as for orienting the drill out of new columns. As the results of the introduction showed, the number of slots with the deflector was reduced and the economic and quality indicators were improved. The special design office of the Soyuznefteavtomatika developed a multichannel summator, which is part of technical equipment for an automated system for controlling the technological processes of oil producing enterprises. Developed in Permneft' is a hydraulically controllable rubber packer, the GUPP-00, designed for hermetically sealing an NKT during lowering and lifting of pipes under pressure. Two methods are proposed for installing the packer: installation by blow through of a liquid through measuring tanks (the installation depth is controlled by the volume of the blow through liquid) and the installation by blow through of air by a UKP-80 compressure with subsequent measurement of the installation depths by an AzINmash-8 unit. With the use of the GUPP-00 packer in a complex with the hermetically sealing head, the lowering and lifting of the NKT under pressure was conducted in the Kungurneft', the Chernushkaneft' and the Polaznaneft' oil and gas producing administrations.

Anti-Factor V inhibitor in patients with autoimmune diseases: case report and literature review

Directory of Open Access Journals (Sweden)

Imashuku S

2011-04-01

Full Text Available Shinsaku Imashuku1, Takeshi Hasegawa2, Kagekatsu Kubo2, Masaki Nakato2, Midori Shima31Division of Pediatrics and Hematology, 2Division of Internal Medicine, Takasago-Seibu Hospital, Takasago, Hyogo; 3Department of Pediatrics, Nara Medical University, Kashihara, Nara, JapanAbstract: Acquired anti-Factor V deficiency caused by inhibitor production is a rare coagulation disorder. Although this is a well known entity in the literature, choice of optimal treatment for an individual patient is difficult, given that no standard therapeutic measures are available because of rare incidence and various underlying diseases occurring in the elderly. An 88 year-old man treated for Hashimoto's disease was found to exhibit prolongation of both prothrombin time and activated partial thromboplastin time. Detailed study of coagulation factors revealed a deficiency of Factor V. Our patient's coagulation disorder resolved in two weeks with intravenous administration of prednisolone 20 mg/day. Clinical features of autoimmune disease-related Factor V deficiency are discussed, along with eight previously reported cases over the past 20 years.Keywords: anti-Factor V inhibitor, Hashimoto's thyroiditis, autoimmune disease

75 FR 41693 - Export Inspection and Weighing Waiver for High Quality Specialty Grains Transported in Containers

Science.gov (United States)

2010-07-19

... Specialty Grains Transported in Containers AGENCY: Grain Inspection, Packers and Stockyards Administration... rule to potentially make permanent the current waiver for high quality grain exported in containers... exported in containers that was established by a final rule on December 13, 2005 (70 FR 73556). This...

77 FR 66578 - Cancellation of Indianapolis Grain Inspection & Weighing Service, Inc. Designation; Selection of...

Science.gov (United States)

2012-11-06

... Stockyards Administration, USDA. ACTION: Notice; correction. SUMMARY: The USDA, Grain Inspection, Packers and Stockyards Administration published a document in the Federal Register on October 31, 2012, concerning... Stockyards Administration. [FR Doc. 2012-27079 Filed 11-5-12; 8:45 am] BILLING CODE 3410-KD-P ...

9 CFR 201.82 - Care and promptness in weighing and handling livestock and live poultry.

Science.gov (United States)

2010-01-01

... handling livestock and live poultry. 201.82 Section 201.82 Animals and Animal Products GRAIN INSPECTION... handling livestock and live poultry. (a) Each stockyard owner, market agency, dealer, packer and live poultry dealer shall exercise reasonable care and promptness with respect to loading, transporting...

78 FR 60820 - Request for Extension and Revision of a Currently Approved Information Collection Under the...

Science.gov (United States)

2013-10-02

... Dexter Thomas, GIPSA, USDA, 1400 Independence Avenue SW., Room 2530-S, Washington, DC 20250-3604. Fax... owners, meat packers, swine contractors, and live poultry dealers in the livestock, poultry, and... and examine financial, competitive, and trade practices in the livestock, meat packing, and poultry...

78 FR 43850 - Opportunity for Designation in Owensboro, KY; Bloomington, IL; Iowa Falls, IA; Casa Grande, AZ...

Science.gov (United States)

2013-07-22

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Opportunity for Designation in Owensboro, KY; Bloomington, IL; Iowa Falls, IA; Casa Grande, AZ; Fargo, ND; Grand Forks, ND and Plainview, TX; Areas; Request for Comments on the Official Agencies Servicing These Areas AGENCY: Grain...

75 FR 52925 - Opportunity for Designation in the Owensboro, KY; Bloomington, IL; Iowa Falls, IA; Casa Grande...

Science.gov (United States)

2010-08-30

... DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Opportunity for Designation in the Owensboro, KY; Bloomington, IL; Iowa Falls, IA; Casa Grande, AZ; Fargo, ND; Grand Forks, ND; and Plainview, TX Areas; Request for Comments on the Official Agencies Servicing These Areas AGENCY...

7 CFR 868.261 - Grade and grade requirements for the classes of brown rice for processing. (See also § 868.263.)

Science.gov (United States)

2010-01-01

... Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD ADMINISTRATION (FEDERAL GRAIN INSPECTION SERVICE), DEPARTMENT OF AGRICULTURE GENERAL REGULATIONS AND STANDARDS FOR CERTAIN AGRICULTURAL..., see § 868.263(c). 3 Plates should be used for southern production rice and sieves should be used for...

76 FR 50881 - Required Scale Tests

Science.gov (United States)

2011-08-17

... RIN 0580-AB10 Required Scale Tests AGENCY: Grain Inspection, Packers and Stockyards Administration... required scale tests. Those documents defined ``limited seasonal basis'' incorrectly. This document... 20, 2011 (76 FR 3485) and on April 4, 2011 (76 FR 18348), concerning required scale tests. Those...

A case study of the Mexican avocado industry based on transaction costs and supply chain management practices

NARCIS (Netherlands)

Arana Coronado, J.J.; Bijman, J.; Omta, S.W.F.; Oude Lansink, A.

2015-01-01

The present study is based on transaction cost economics and supply chain management to analyze how the adoption of supply chain management practices in the Mexican avocado industry reduces the transaction costs between producers and packers. Two sources of information are used: interviews from

7 CFR 801.1 - Applicability.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Applicability. 801.1 Section 801.1 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.1 Applicability. The requirements set forth in this part 801...

Packer Detection for Multi-Layer Executables Using Entropy Analysis

Directory of Open Access Journals (Sweden)

Munkhbayar Bat-Erdene

2017-03-01

Full Text Available Packing algorithms are broadly used to avoid anti-malware systems, and the proportion of packed malware has been growing rapidly. However, just a few studies have been conducted on detection various types of packing algorithms in a systemic way. Following this understanding, we elaborate a method to classify packing algorithms of a given executable into three categories: single-layer packing, re-packing, or multi-layer packing. We convert entropy values of the executable file loaded into memory into symbolic representations, for which we used SAX (Symbolic Aggregate Approximation. Based on experiments of 2196 programs and 19 packing algorithms, we identify that precision (97.7%, accuracy (97.5%, and recall ( 96.8% of our method are respectively high to confirm that entropy analysis is applicable in identifying packing algorithms.

21 CFR 2.35 - Use of secondhand containers for the shipment or storage of food and animal feed.

Science.gov (United States)

2010-04-01

... packers employ used poultry crates for shipment of fresh vegetables, including cabbage and celery. Salmonella organisms are commonly present on dressed poultry and in excreta and fluid exudates from dressed birds. Thus wooden crates in which dressed poultry has been iced and packed are potential sources of...

Collective resistance despite complicity : High identifiers rise above the legitimization of disadvantage by the in-group

NARCIS (Netherlands)

Jimenez-Moya, Gloria; Rodriguez-Bailon, Rosa; Spears, Russell; de Lemus, Soledad

How do individuals deal with group disadvantage when their fellow in-group members conceive it as legitimate? Integrating research on the normative conflict model (Packer, 2008, Pers. Soc. Psychol. Rev., 12, 50) and collective action, we expect high identifiers to reject the in-group norm of

75 FR 32355 - Notice of Request for Revision of a Currently Approved Information Collection

Science.gov (United States)

2010-06-08

.... Expiration Date of Approval: November 30, 2010. Type of Request: Revision of a currently approved information... retailers to market product. The Agricultural Marketing Act of 1946 (7 U.S.C. 1621-1627), section 203(g... ornamental trade, which includes packers, processors, brokers, retailers, producers, and associated...

geochemical assessment of influence of urbanization on heavy ...

African Journals Online (AJOL)

PROF EKWUEME

Trace element enrichment and pollution caused by urbanization with its ... The result of the concentration of trace elements in ppm showed in the order of ... environmental geochemistry has yielded a significant ... processing industries, sawmill abattoir and waste metal ... plastic packer to avoid contamination of samples. At.

7 CFR 868.307 - Moisture.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Moisture. 868.307 Section 868.307 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... Application of Standards § 868.307 Moisture. Water content in milled rice as determined by an FGIS approved...

77 FR 50561 - Livestock Mandatory Reporting Program; Establishment of the Reporting Regulation for Wholesale Pork

Science.gov (United States)

2012-08-22

... the Major Provisions of the Regulatory Action in Question This final rule requires packers to report... qualitative basis. The qualitative benefits derived from the literature are: 1. The increased number of firms... against on the basis of race, color, national origin, gender, religion, age, disability, sexual...

7 CFR 989.15 - Handler.

Science.gov (United States)

2010-01-01

... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and... who blends raisins after they have been placed in trade channels by a packer with other such raisins in trade channels; or (3) a dehydrator who, in his capacity as a dehydrator, blends raisins entirely...

7 CFR 1212.80 - Right of the Secretary.

Science.gov (United States)

2010-01-01

... RESEARCH, PROMOTION, CONSUMER EDUCATION AND INDUSTRY INFORMATION ORDER Honey Packers and Importers Research, Promotion, Consumer Education, and Industry Information Order Miscellaneous § 1212.80 Right of the Secretary... 7 Agriculture 10 2010-01-01 2010-01-01 false Right of the Secretary. 1212.80 Section 1212.80...

75 FR 56911 - Request for Public Comment on the United States Standards for Rough Rice, Brown Rice for...

Science.gov (United States)

2010-09-17

... for Rough Rice, Brown Rice for Processing, and Milled Rice AGENCY: Grain Inspection, Packers and... reviewing the United States Standards and grading procedures for Rough Rice, Brown Rice for Processing, and Milled Rice under the Agriculture Marketing Act of 1946 (AMA). Since the standards were last revised...

7 CFR 800.138 - Conflict of interest.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Conflict of interest. 800.138 Section 800.138 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... Inspection Services § 800.138 Conflict of interest. Official personnel cannot perform or participate in...

The impact of identification on adherence to group norms in team sports: Who is going the extra mile? : Who Is Going the Extra Mile?

NARCIS (Netherlands)

Täuber, Susanne; Sassenberg, Kai

2012-01-01

The present research investigates the applicability of the Normative Conflict Model of Dissent (NCMD; Packer, 2008) in the context of team sports. The core assumption of the NCDM is that strongly identified group members adhere to group norms less (i.e., deviate more) when these norms are

7 CFR 457.139 - Fresh market tomato (dollar plan) crop insurance provisions.

Science.gov (United States)

2010-01-01

... a wholesaler, retailer, packer, processor, shipper or buyer. Examples of direct marketing include... offered by us for each planting period and practice. For example, if you choose 100 percent of the maximum... second time for ground-culture tomatoes (the third time for staked tomatoes); (ii) Unharvested mature...

7 CFR 800.128 - Conflicts of interest.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Conflicts of interest. 800.128 Section 800.128 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... Reinspection Services and Review of Weighing Services § 800.128 Conflicts of interest. Official personnel...

7 CFR 801.9 - Tolerances for test weight apparatuses.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for test weight apparatuses. 801.9 Section 801.9 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS... PERFORMANCE REQUIREMENTS FOR GRAIN INSPECTION EQUIPMENT § 801.9 Tolerances for test weight apparatuses. The...

7 CFR 801.4 - Tolerances for dockage testers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for dockage testers. 801.4 Section 801.4 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.4 Tolerances for dockage testers. The maintenance tolerances for...

7 CFR 801.8 - Tolerances for sieves.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for sieves. 801.8 Section 801.8 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.8 Tolerances for sieves. The maintenance tolerances for sieves...

7 CFR 801.6 - Tolerances for moisture meters.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for moisture meters. 801.6 Section 801.6 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.6 Tolerances for moisture meters. (a) The maintenance tolerances...

7 CFR 801.3 - Tolerances for barley pearlers.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Tolerances for barley pearlers. 801.3 Section 801.3 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... FOR GRAIN INSPECTION EQUIPMENT § 801.3 Tolerances for barley pearlers. The maintenance tolerances for...

Export contracts for non-traditional products: Chayote from Costa Rica

NARCIS (Netherlands)

Saénz, F.; Ruben, R.

2004-01-01

This paper focuses on the determinants of market and contract choice for non-traditional crops and the possibilities for involving local producers in global agro-food chains through delivery relationships with packers and brokers. Main attention is given to the importance of quality for entering the

Body packing and intra-vaginal body pushing of cocaine: A case report.

Science.gov (United States)

Wankhade, Vishwajit Kishor; Chikhalkar, B G

2018-03-01

Drug trafficking is an international problem. The prevalence of drug trafficking and newer concealing methods has been ever increasing. Body packing is described as using the abdominal or pelvic cavity for concealing illegal drugs. Body pushers smuggle illicit drugs by inserting them into rectum or vagina. These cases are either presented to the emergency departments as Body Packer Syndrome or as asymptomatic cases for observation, detained for alleged possession of contraband substances. We report a unique case of an asymptomatic white female who was detained at Mumbai International Airport under suspicion and brought to hospital for observation. X ray and CT scan examination revealed 7 wrapped packets in gastrointestinal track and 1 large packet in vagina. A case of female body packer using multiple modalities of concealment especially in vagina is rare in India so it is becomes imperative to present this case in the light of body packing and body pushing of contraband substances. Copyright © 2017 Elsevier B.V. All rights reserved.

Some Applesauce Is Both Tasty and Nutritious.

Science.gov (United States)

Bracey, Gerald W.

1999-01-01

Tackles Arnold Packer's assertion that U.S. workers' productivity has declined in recent years. The quality of education in developed nations is only loosely coupled to national economic health. Many educators and economists are increasingly skeptical of the notion that better schools mean a more prosperous nation. (MLH)

78 FR 27857 - United States Standards for Wheat

Science.gov (United States)

2013-05-13

... RIN 0580-AB12 United States Standards for Wheat AGENCY: Grain Inspection, Packers and Stockyards... (GIPSA) is revising the United States Standards for Wheat under the United States Grain Standards Act (USGSA) to change the definition of Contrasting classes (CCL) in the class Hard White wheat. This change...

9 CFR 201.43 - Payment and accounting for livestock and live poultry.

Science.gov (United States)

2010-01-01

... and live poultry. 201.43 Section 201.43 Animals and Animal Products GRAIN INSPECTION, PACKERS AND... poultry. (a) Market agencies to make prompt accounting and transmittal of net proceeds. Each market agency... nature of the transaction. (b) Prompt payment for livestock and live poultry—terms and conditions. (1) No...

9 CFR 201.100 - Records to be furnished poultry growers and sellers.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Records to be furnished poultry growers and sellers. 201.100 Section 201.100 Animals and Animal Products GRAIN INSPECTION, PACKERS AND...) Right to discuss the terms of poultry growing arrangement offer. As a live poultry dealer...

9 CFR 202.111 - Rule 11: Hearing, oral or written.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Rule 11: Hearing, oral or written. 202.111 Section 202.111 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS... for oral hearing, timely filed. Declining to make such withdrawal shall not affect the rights or...

Reference on shooting-blasting apparatus. Spravochnik po prostrelochno-vzryvnoy apparature

Energy Technology Data Exchange (ETDEWEB)

Fridlyander, L Ya

1983-01-01

Purpose, device, technical characteristics of the preforators, powder generators, blasting packers, core lifter, torpedoes, equipment and technology of charging, storage, transporting and testing of apparatus, characteristic errors and elimination of them are presented. Recommendations are made for safe work and efficient use of apparatus in different geological-technical conditions.

76 FR 3485 - Required Scale Tests

Science.gov (United States)

2011-01-20

...-AB10 Required Scale Tests AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION... their scales tested at least twice each calendar year at intervals of approximately 6 months. This final rule requires that regulated entities complete the first of the two scale tests between January 1 and...

76 FR 18348 - Required Scale Tests

Science.gov (United States)

2011-04-04

... RIN 0580-AB10 Required Scale Tests AGENCY: Grain Inspection, Packers and Stockyards Administration... published a document in the Federal Register on January 20, 2011 (76 FR 3485), defining required scale tests... the last sentence of paragraph (a) to read as follows: Sec. 201.72 Scales; testing of. (a...

7 CFR 810.801 - Definition of mixed grain.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Definition of mixed grain. 810.801 Section 810.801 Agriculture Regulations of the Department of Agriculture (Continued) GRAIN INSPECTION, PACKERS AND STOCKYARD... GRAIN United States Standards for Mixed Grain Terms Defined § 810.801 Definition of mixed grain. Any...

"In Honor of Excellence."

Science.gov (United States)

Hughes, Anna May

1983-01-01

Spotlights seven outstanding secondary school theatre programs and their directors: Frank Bluestein, Germantown, TN; John Steele, Plano, TX; Joe Juliano, Hamden, CT; Jack Parkhurst, Ralston, NE; Robert Geuder (Thomas Jefferson High School) Cedar Rapids, IA; Judith Rethwisch (Affton High School) St. Louis, MO; and Henry Wicke (Packer Collegiate…

Mechanical and mathematical models of multi-stage horizontal fracturing strings and their application

Directory of Open Access Journals (Sweden)

Zhanghua Lian

2015-03-01

Full Text Available Multi-stage SRV fracturing in horizontal wells is a new technology developed at home and abroad in recent years to effectively develop shale gas or low-permeability reservoirs, but on the other hand makes the mechanical environment of fracturing strings more complicated at the same time. In view of this, based on the loading features of tubing strings during the multi-stage fracturing of a horizontal well, mechanical models were established for three working cases of multiple packer setting, open differential-pressure sliding sleeve, and open ball-injection sliding sleeve under a hold-down packer. Moreover, mathematical models were respectively built for the above three cases. According to the Lame formula and Von Mises stress calculation formula for the thick-walled cylinder in the theory of elastic mechanics, a mathematical model was also established to calculate the equivalent stress for tubing string safety evaluation when the fracturing string was under the combined action of inner pressure, external squeezing force and axial stress, and another mathematical model was built for the mechanical strength and safety evaluation of multi-stage fracturing strings. In addition, a practical software was developed for the mechanical safety evaluation of horizontal well multi-stage fracturing strings according to the mathematical model developed for the mechanical calculation of the multi-packer string in horizontal wells. The research results were applied and verified in a gas well of Tahe Oilfield in the Tarim Basin with excellent effects, providing a theoretical basis and a simple and reliable technical means for optimal design and safety evaluation of safe operational parameters of multi-stage fracturing strings in horizontal wells.

Advanced productivity forecast using petrophysical wireline data calibrated with MDT tests and numerical reservoir simulation

Energy Technology Data Exchange (ETDEWEB)

Andre, Carlos de [PETROBRAS, Rio de Janeiro, RJ (Brazil); Canas, Jesus A.; Low, Steven; Barreto, Wesley [Schlumberger, Houston, TX (United States)

2004-07-01

This paper describes an integrated and rigorous approach for viscous and middle oil reservoir productivity evaluation using petrophysical models calibrated with permeability derived from mini tests (Dual Packer) and Vertical Interference Tests (VIT) from open hole wire line testers (MDT SLB TM). It describes the process from Dual Packer Test and VIT pre-job design, evaluation via analytical and inverse simulation modeling, calibration and up scaling of petrophysical data into a numerical model, history matching of Dual Packer Tests and VIT with numerical simulation modeling. Finally, after developing a dynamic calibrated model, we perform productivity forecasts of different well configurations (vertical, horizontal and multilateral wells) for several deep offshore oil reservoirs in order to support well testing activities and future development strategies. The objective was to characterize formation static and dynamic properties early in the field development process to optimize well testing design, extended well test (EWT) and support the development strategies in deep offshore viscous oil reservoirs. This type of oil has limitations to flow naturally to surface and special lifting equipment is required for smooth optimum well testing/production. The integrated analysis gave a good overall picture of the formation, including permeability anisotropy and fluid dynamics. Subsequent analysis of different well configurations and lifting schemes allows maximizing formation productivity. The simulation and calibration results are compared to measured well test data. Results from this work shows that if the various petrophysical and fluid properties sources are integrated properly an accurate well productivity model can be achieved. If done early in the field development program, this time/knowledge gain could reduce the risk and maximize the development profitability of new blocks (value of the information). (author)

Relationship between large slip area and static stress drop of aftershocks of inland earthquake :Example of the 2007 Noto Hanto earthquake

Science.gov (United States)

Urano, S.; Hiramatsu, Y.; Yamada, T.

2013-12-01

The 2007 Noto Hanto earthquake (MJMA 6.9; hereafter referred to the main shock) occurred at 0:41(UTC) on March 25, 2007 at a depth of 11km beneath the west coast of Noto Peninsula, central Japan. The dominant slip of the main shock was on a reverse fault with a right-lateral slip and the large slip area was distributed from hypocenter to the shallow part on the fault plane (Horikawa, 2008). The aftershocks are distributed not only in the small slip area but also in the large slip area (Hiramatsu et al., 2011). In this study, we estimate static stress drops of aftershocks on the fault plane of the main shock. We discuss the relationship between the static stress drops of the aftershocks and the large slip area of the main shock by investigating spatial pattern of the values of the static stress drops. We use the waveform data obtained by the group for the joint aftershock observations of the 2007 Noto Hanto Earthquake (Sakai et al., 2007). The sampling frequency of the waveform data is 100 Hz or 200 Hz. Focusing on similar aftershocks reported by Hiramatsu et al. (2011), we analyze static stress drops by using the method of empirical Green's function (EGF) (Hough, 1997) as follows. The smallest earthquake (MJMA≥2.0) of each group of similar earthquakes is set to the EGF earthquake, and the largest earthquake (MJMA≥2.5) is set to the target earthquake. We then deconvolve the waveform of an interested earthquake with that of the EGF earthquake at each station and obtain the spectral ratio of the sources that cancels the propagation effects (path and site effects). Following the procedure of Yamada et al. (2010), we finally estimate static stress drops for P- and S-waves from corner frequencies of the spectral ratio by using a model of Madariaga (1976). The estimated average value of static stress drop is 8.2×1.3 MPa (8.6×2.2 MPa for P-wave and 7.8×1.3 MPa for S-wave). These values are coincident approximately with the static stress drop of aftershocks of other

9 CFR 201.55 - Purchases, sales, acquisitions, payments and settlements to be made on actual weights.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Purchases, sales, acquisitions... AGRICULTURE REGULATIONS UNDER THE PACKERS AND STOCKYARDS ACT Trade Practices § 201.55 Purchases, sales... ticket. If the actual weight used is not obtained on the date and at the place of transfer of possession...

21 CFR 800.12 - Contact lens solutions and tablets; tamper-resistant packaging.

Science.gov (United States)

2010-04-01

... AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800... packer who packages for retail sale a product regulated as a medical device that is a solution intended... bottle with a shrink band could say “For your protection, this bottle has an imprinted seal around the...

75 FR 56911 - Request for Public Comment on the United States Standards for Corn

Science.gov (United States)

2010-09-17

... Public Comment on the United States Standards for Corn AGENCY: Grain Inspection, Packers and Stockyards... Standards and grading procedures for corn under the United States Grain Standards Act (USGSA). Since the standards were last revised, the use of corn for ethanol and the number of different varieties of corn has...

Modified-atmosphere storage under subatmospheric pressure and beef quality: II. Color, drip, cooking loss, sarcomere length, and tenderness

NARCIS (Netherlands)

Smulders, F.J.M.; Hiesberger, J.; Hofbauer, P.; Dogl, B.; Dransfield, E.

2006-01-01

Beef has a requirement for refrigerated storage up to 14 d to achieve adequate aging and a tender product. To achieve this aging with little spoilage and no surface drying, vacuum packaging is attractive, because it is inherently simple and offers a clear indication to the packer when the process

9 CFR 202.113 - Rule 13: Written hearing.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Rule 13: Written hearing. 202.113 Section 202.113 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION... waiver of the right to file such evidence. (g) Extension of time for depositions. If any party timely...

9 CFR 202.115 - Rule 15: Submission for final consideration.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Rule 15: Submission for final consideration. 202.115 Section 202.115 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS... the judicial officer for decision. (d) Oral argument. There shall be no right to oral argument other...

7 CFR 59.202 - Mandatory daily reporting for barrows and gilts.

Science.gov (United States)

2010-01-01

... live weight basis; and (iv) The base price and premiums and discounts paid for carcass characteristics... unavailable due to pricing that is determined on a delayed basis. The packer shall report information on such... reporting day, unless such information is unavailable due to pricing that is determined on a delayed basis...

76 FR 75809 - Prior Label Approval System: Generic Label Approval

Science.gov (United States)

2011-12-05

... statement, cooking instructions, packer product code information, or UPC product code information; g. Any... 317.2 or 381.121; i. The addition, deletion, or amendment of recipe suggestions for the product; j... disclaimer statements concerning pathogens, e.g., ``for cooking only'' or ``not tested for E. coli O157:H7...

21 CFR 161.30 - Declaration of quantity of contents on labels for canned oysters.

Science.gov (United States)

2010-04-01

... canned oysters. 161.30 Section 161.30 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH....30 Declaration of quantity of contents on labels for canned oysters. (a) For many years packers of canned oysters in the Gulf area of the United States have labeled their output with a declaration of the...

9 CFR 201.108-1 - Instructions for weighing live poultry.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Instructions for weighing live poultry... STOCKYARDS ACT Poultry-Packers and Live Poultry Dealers § 201.108-1 Instructions for weighing live poultry. Live poultry dealers who operate scales on which live poultry is weighed for purposes of purchase, sale...

7 CFR 1212.32 - United States Customs Service.

Science.gov (United States)

2010-01-01

... 7 Agriculture 10 2010-01-01 2010-01-01 false United States Customs Service. 1212.32 Section 1212... § 1212.32 United States Customs Service. “United States Customs Service” or “Customs” means the United States Customs and Border Protection, an agency of the Department of Homeland Security. Honey Packers and...

9 CFR 202.101 - Rule 1: Meaning of words.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Rule 1: Meaning of words. 202.101 Section 202.101 Animals and Animal Products GRAIN INSPECTION, PACKERS AND STOCKYARDS ADMINISTRATION...: Meaning of words. In these rules, words in the singular form shall be deemed to import the plural, and...

9 CFR 203.10 - Statement with respect to insolvency; definition of current assets and current liabilities.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Statement with respect to insolvency... to insolvency; definition of current assets and current liabilities. (a) Under the Packers and Stockyards Act, 1921, as amended and supplemented (7 U.S.C. 181 et seq.), the principal test of insolvency is...

Verification of the geostatistical inference code INFERENS, Version 1.1, and demonstration using data from Finnsjoen

International Nuclear Information System (INIS)

Geier, J.

1993-06-01

This report describes preliminary verification and demonstration of the geostatistical inference code, INFERENS Version 1.1. This code performs regularization of packer test conductivities, and iterative generalized least-squares estimation (IGLSE) of nested covariance models and spatial trends for the regularized data. Cross-validation is used to assess the quality of the estimated models in terms of statistics for the kriging errors. The code includes a capability to generate synthetic datasets for a given configuration of packer tests; this capability can be used for verification exercises and numerical experiments to aid in the design of packer testing programs. The report presents the results of a set of verification test cases. The test cases were designed to test the ability of INFERENS 1.1 to estimate the parameters of a variety of covariance models, with or without trends. This was done using synthetic datasets. This report also describes an application of INFERENS 1.1 to the dataset from the Finnsjoen site. The results are roughly similar to those obtained previously by Norman (1992a) using INFERENS 1.0, for the comparable cases. The actual numerical results are different, which may be due to changes in the fitting algorithms, and differences in how the lag pairs are divided into lag classes. The demonstrations confirm the result previously obtained by Norman, that the fitted horizontally isotropic models are less good, in terms of their cross-validation statistics, than the corresponding isotropic models. The use of nested covariance models is demonstrated to give visually improved fits to the sample semivariograms, at both short and long lag distances. However, despite the good match to the semivariograms, the nested models obtained are not better than the simple models, in terms of cross-validation statistics

Discrete fracture modelling of the Finnsjoen rock mass: Phase 2

International Nuclear Information System (INIS)

Geier, J.E.; Axelsson, C.L.; Haessler, L.; Benabderrahmane, A.

1992-04-01

A discrete fracture network (DFN) model of the Finnsjoen site was derived from field data, and used to predict block-scale flow and transport properties. The DFN model was based on a compound Poisson process, with stochastic fracture zones, and individual fracture concentrated around the fracture zones. This formulation was used to represent the multitude of fracture zones at the site which could be observed on lineament maps and in boreholes, but were not the focus of detailed characterization efforts. Due to a shortage of data for fracture geometry at depth, distributions of fracture orientation and size were assumed to be uniform throughout the site. Transmissivity within individual fracture planes was assumed to vary according to a fractal model. Constant-head packer tests were simulated with the model, and the observed transient responses were compared with actual tests in terms of distributions of interpreted transmissivity and flow dimension, to partially validate the model. Both simulated and actual tests showed a range of flow dimension from sublinear to spherical, indicating local variations in the connectivity of the fracture population. A methodology was developed for estimation of an effective stochastic continuum from the DFN model, but this was only partly demonstrated. Directional conductivities for 40 m block were estimated using the DFN model. These show extremely poor correlation with results of multiple packer tests in the same blocks, indicating possible limitation of small-scale packer tests for predicting block-scale properties. Estimates are given of effective flow porosity and flow wetted surface, based on the block-scale flow fields calculated by the DFN model, and probabilistic models for the relationships among local fracture transmissivity, void space, and specific surface. The database for constructing these models is extremely limited. A review is given of the existing database for single fracture hydrologic properties. (127 refs

Discrete fracture modelling of the Finnsjoen rock mass. Phase 1: Feasibility study

International Nuclear Information System (INIS)

Geier, J.E.; Axelsson, C.L.

1991-03-01

The geometry and properties of discrete fractures are expected to control local heterogeneity in flow and solute transport within crystalline rock in the Finnsjoen area. The present report describes the first phase of a discrete-fracture modelling study, the goal of which is to develop stochastic-continuum and hydrologic properties. In the first phase of this study, the FracMan discrete fracture modelling package was used to analyse discrete fracture geometrical and hyrological data. Constant-pressure packer tests were analysed using fractional dimensional methods to estimate effective transmissivities and flow dimension for the packer test intervals. Discrete fracture data on orientation, size, shape, and location were combined with hydrologic data to develop a preliminary conceptual model for the conductive fractures at the site. The variability of fracture properties was expressed in the model by probability distributions. The preliminary conceptual model was used to simulate three-dimensional populations of conductive fractures in 25 m and 50 m cubes of rock. Transient packer tests were simulated in these fracture populations, and the simulated results were used to validate the preliminary conceptual model. The calibrated model was used to estimate the components of effective conductivity tensors for the rock by simulating steady-state groundwater flow through the cubes in three orthogonal directions. Monte Carlo stochastic simulations were performed for alternative realizations of the conceptual model. The number of simulations was insufficient to give a quantitative prediction of the effective conductivity heterogeneity and anisotropy on the scales of the cubes. However, the results give preliminary, rough estimates of these properties, and provide a demonstration of how the discrete-fracture network concept can be applied to derive data that is necessary for stochastic continuum and channel network modelling. (authors)

Training the Body for Health"ism": Reifying "Vitality" in and through the Clinical Gaze of the Neoliberal Fitness Club

Science.gov (United States)

Wiest, Amber L.; Andrews, David L.; Giardina, Michael D.

2015-01-01

In the last thirty years there has been a broad shift in ideas and practices concerning the individual's responsibility to pursue healthiness (in particular ways, with particular idealized outcomes). This is a result of the ''unwinding'' (Packer 2013) of the social welfare contract between governments and its citizens, and…

What a Joint. Youth Training Scheme. Core Exemplar Work Based Project.

Science.gov (United States)

Further Education Staff Coll., Blagdon (England).

This trainer's guide is intended to assist supervisors of work-based career training projects in helping students become familiar with meat processing--livestock at the stockyards, meat packers (wholesalers), and butcher shops--to the cooked state and to become familiar with the different joints (cuts or parts) of beef, lamb, and pork. The guide…

An experimental system for coiled tubing partial underbalanced drilling (CT-PUBD) technique

Science.gov (United States)

Shi, H. Z.; Ji, Z. S.; Zhao, H. Q.; Chen, Z. L.; Zhang, H. Z.

2018-05-01

To improve the rate of penetration (ROP) in hard formations, a new high-speed drilling technique called Coiled Tubing Partial Underbalanced Drilling (CT-PUBD) is proposed. This method uses a rotary packer to realize an underbalanced condition near the bit by creating a micro-annulus and an overbalanced condition at the main part of the annulus. A new full-scale laboratory experimental system is designed and set up to study the hydraulic characteristics and drilling performance of this method. The system is composed of a drilling system, circulation system, and monitor system, including three key devices, namely, cuttings discharge device, rotary packer, and backflow device. The experimental results showed that the pressure loss increased linearly with the flow rate of the drilling fluid. The high drilling speed of CT-PUBD proved it a better drilling method than the conventional drilling. The experimental system may provide a fundamental basis for the research of CT-PUBD, and the results proved that this new method is feasible in enhancing ROP and guaranteeing the drilling safety.

Drug smuggling by body packing: what radiologists should know about it.

Science.gov (United States)

Hergan, Klaus; Kofler, Karl; Oser, Wolfgang

2004-04-01

Body packing is a distinct method for smuggling drugs. What radiologists need to know is discussed in this pictorial review. Radiologists are confronted with diagnostic imaging of body packers because of two main reasons: complications of body packing and identifying drug packets within the gastrointestinal tract. The standard examination used is plain X-ray of the abdomen in an upright and a supine position. Computed tomography is occasionally used but nevertheless described as a very accurate diagnostic tool. Ultrasound and MR imaging do not play an important role in that field. Depending on the purity of the drug, three different forms of attenuation have been described: hashish is denser than stool; cocaine appears similar to stool; and heroin has a gaseous transparence. The packets are of a round to oval form, usually of a particular uniformity and rarely confused with scybala if arranged like a pearl chain; therefore, plain X-ray is the method of choice to detect drug-filled packets within the gastrointestinal tract of body packers.

Estimation of hydraulic properties and development of a layered conceptual model for the Snake River plain aquifer at the Idaho National Engineering Laboratory, Idaho

International Nuclear Information System (INIS)

Frederick, D.B.; Johnson, G.S.

1996-02-01

The Idaho INEL Oversight Program, in association with the University of Idaho, Idaho Geological Survey, Boise State University, and Idaho State University, developed a research program to determine the hydraulic properties of the Snake River Plain aquifer and characterize the vertical distribution of contaminants. A straddle-packer was deployed in four observation wells near the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory. Pressure transducers mounted in the straddle-packer assembly were used to monitor the response of the Snake River Plain aquifer to pumping at the ICPP production wells, located 2600 to 4200 feet from the observation wells. The time-drawdown data from these tests were used to evaluate various conceptual models of the aquifer. Aquifer properties were estimated by matching time-drawdown data to type curves for partially penetrating wells in an unconfined aquifer. This approach assumes a homogeneous and isotropic aquifer. The hydraulic properties of the aquifer obtained from the type curve analyses were: (1) Storativity = 3 x 10 -5 , (2) Specific Yield = 0.01, (3) Transmissivity = 740 ft 2 /min, (4) Anisotropy (Kv:Kh)= 1:360

Adverse renal effects of anaplastic lymphoma kinase inhibitors and the response to alectinib of an ALK+ lung cancer patient with renal dysfunction

Directory of Open Access Journals (Sweden)

Shimada M

2017-06-01

Full Text Available Midori Shimada,1,2 Minoru Fukuda,2,3 Masaaki Fukuda,2 Takeshi Kitazaki,2 Kohji Hashiguchi,2 Takaya Ikeda,1 Hiroyuki Yamaguchi,1 Katsumi Nakatomi,1 Kazuto Ashizawa,3 Hiroshi Mukae1 1Department of Respiratory Medicine, Unit of Translational Medicine, Nagasaki University Graduate School of Biomedical Sciences, 2Department of Respiratory Medicine, Japanese Red Cross Nagasaki Genbaku Hospital, 3Clinical Oncology Center, Nagasaki University Hospital, Nagasaki, Japan Abstract: A 62-year-old female patient with renal dysfunction and pulmonary adenocarcinoma developed postoperative recurrence and received carboplatin/pemetrexed and maintenance pemetrexed. As an anaplastic lymphoma kinase (ALK gene translocation was identified, the therapy was changed to crizotinib. However, the patient’s blood creatinine level increased, and her physical status worsened. Alectinib also induced exacerbation of renal dysfunction but was controlled by dose reduction of 140 mg twice daily for 2 weeks treatment and 2 weeks break were repeated, and exhibited a partial response for 16 months. Here, we describe the case in which alectinib treatment had beneficial clinical effects on ALK-positive lung adenocarcinoma, which controlled the adverse renal effects by dose reduction and drug breaks. Keywords: lung cancer, ALK, renal dysfunction, alectinib

75 FR 8960 - Agency Information Collection Activities; Submission for Office and Management Budget Review...

Science.gov (United States)

2010-02-26

... Cosmetic Act (the act) by creating a new section 417 (21 U.S.C. 350f), among other things. Section 417 of... typically found on packaging including product codes, use-by dates, and the names of manufacturers, packers... designed to enable FDA to quickly identify and track an article of food (other than infant formula) for...

Bootstrapping and Maintaining Trust in the Cloud

Science.gov (United States)

2016-12-01

such as going off the certificate’s common name (hostname). 6https://www.packer.io/ 7https://www.chef.io/ chef / Node Registrar ID,AIKpub,EKpub EncEK(Ke...and libvirt to support the creation of companion vTPM Xen domains for each user created instance. We link the OpenStack UUID to the keylime provider

Refrains of the School Critics: Behind the Rhetoric Lies a Contempt in some Quarters for the Work of Public Educators

Science.gov (United States)

Ohanian, Susan

2005-01-01

George Packer, a New Yorker staff writer, points to the danger of clarity, observing that seemingly simple and tough-minded words blow out as much smoke as the jargon of the Pentagon of decades past. Nowhere is this smoke thicker and trickier than in the lingo the corporate-politico-media squad uses when talking about public schools. At first…

Smith Tackles Oakland Unified

Science.gov (United States)

Mellon, Ericka

2011-01-01

As a 20-something, Anthony "Tony" Smith had fulfilled one dream: playing professional football for the Green Bay Packers and the San Francisco 49ers. Next up, he thought, was law school, but a former mentor reminded him that he is a teacher. Smith never became a classroom teacher, but his background in sports--where he learned the power…

29 CFR 780.915 - “Place of first processing.”

Science.gov (United States)

2010-07-01

... operations which first change the form of the fresh fruits or vegetables from their raw and natural state are...)(16) Exempt Operations on Fruits Or Vegetables § 780.915 “Place of first processing.” Under section 13... Co., 51 F. Supp. 938). However, a packer's plant may qualify as a place of first marketing. (See...

In Defense of Memorization: The Role of Periodization in Historical Inquiry

Science.gov (United States)

Neumann, Dave

2011-01-01

The author is a master packer. Last summer, anticipating the thousand-mile drive from southern California to Colorado, he packed their Sienna so that everything had its logical place, from the DVDs to the audio books, from the beef jerky to the bottled Starbucks mocha. Of course, at first he had to explain to everyone else where things were, since…

Fracture-specific pressure measurements at the Olkiluoto site in Eurajoki drillhole OL-KR39

International Nuclear Information System (INIS)

Ripatti, K.; Poellaenen, J.; Hurmerinta, E.; Rouhiainen, P.

2011-12-01

An option was built to the Posiva Flow Log, Difference flow method (PFL DIFF). A double packer device was combined together with a PFL DIFF probe. The new tool was needed for measurements of the very low hydraulic head. Indications of these were detected earlier in some fractures of drillhole OL-KR39. The target fractures could be measured with the accurate absolute pressure sensor in the PFL DIFF probe. Principles of the methods and the results of measurements are presented in this report. The measurements were carried out in drillhole OL-KR39 at the Olkiluoto investigation site between April 2011 and May 2011. The device used includes a sensor for single point resistance (SPR). SPR measurement is used to place the device accurately on the chosen fracture. The section length limited by the packers is about 1 m. The measurements were carried out in natural (i.e. un-pumped) conditions. The same measuring program was employed in all chosen fractures. Electrical conductivity (EC) of drillhole water and flow rate along the drillhole were also measured in conjunction with the pressure measurements. (orig.)

Pediatric body packing: drug smuggling reaches a new low.

Science.gov (United States)

Beno, Suzanne; Calello, Diane; Baluffi, Andrew; Henretig, Fred M

2005-11-01

The case of a 6-year-old boy presenting with severe clinical manifestations of an opioid intoxication and who is discovered to be an international "body packer" is presented and discussed. This article is the first to report on the phenomenon of body packing in young children. It also highlights the use of prescription opioids as cargo, which has not previously been addressed in the literature.

Malware Memory Analysis for Non-specialists: Investigating Publicly Available Memory Image 0zapftis (R2D2)

Science.gov (United States)

2013-10-01

FAZ2011/Trojaner_englisch.pdf. [12] Network World. German Federal Trojan (0zapftis/Bundestrojaner) Eavesdrops On Skype, IE, Firefox , MSN Messenger...More. Online article. October 2011. http://www.darknet.org.uk/2011/10/german-federal-trojan-0zapftisbundestrojaner- eavesdrops-on-skype-ie- firefox ...compress executable files. UPX executable file packers exist for Windows, Linux, Mac OS X and other platforms. Vmem A Vmem file is a VMware

The principle of open access is an essential part of our profession

OpenAIRE

Editores Biblios

2012-01-01

Interview with Abel Laerte Packer (Brazil). Project coordinator of SciELO (Scientific Electronic Library Online) and Advisor to the da Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP). Master's degree in librarianship by Syracuse University, New York, has been director of the Latin American and Caribbean Center on Health Sciences Information (BIREME/PAHO/WHO).

7 CFR 1260.311 - Collecting persons for purposes of collection of assessments.

Science.gov (United States)

2010-01-01

... responsible for collecting and remitting assessments in these States: State Salesthrough auction market Sales... B-CP B-CP B-CP Nevada B B B B B Oregon CP B-CP B B B New Mexico CP B-CP B-CP B-CP B-CP Utah CP B-CP... auction or livestock market and which is not a sale to a slaughter/packer, feedlot, or order buyer or...

Exploratory use of periodic pumping tests for hydraulic characterization of faults

Science.gov (United States)

Cheng, Yan; Renner, Joerg

2018-01-01

Periodic pumping tests were conducted using a double-packer probe placed at four different depth levels in borehole GDP-1 at Grimselpass, Central Swiss Alps, penetrating a hydrothermally active fault. The tests had the general objective to explore the potential of periodic testing for hydraulic characterization of faults, representing inherently complex heterogeneous hydraulic features that pose problems for conventional approaches. Site selection reflects the specific question regarding the value of this test type for quality control of hydraulic stimulations of potential geothermal reservoirs. The performed evaluation of amplitude ratio and phase shift between pressure and flow rate in the pumping interval employed analytical solutions for various flow regimes. In addition to the previously presented 1-D and radial-flow models, we extended the one for radial flow in a system of concentric shells with varying hydraulic properties and newly developed one for bilinear flow. In addition to these injectivity analyses, we pursued a vertical-interference analysis resting on observed amplitude ratio and phase shift between the periodic pressure signals above or below packers and in the interval by numerical modeling of the non-radial-flow situation. When relying on the same model the order of magnitude of transmissivity values derived from the analyses of periodic tests agrees with that gained from conventional hydraulic tests. The field campaign confirmed several advantages of the periodic testing, for example, reduced constraints on testing time relative to conventional tests since a periodic signal can easily be separated from changing background pressure by detrending and Fourier transformation. The discrepancies between aspects of the results from the periodic tests and the predictions of the considered simplified models indicate a hydraulically complex subsurface at the drill site that exhibits also hydromechanical features in accord with structural information

ANALYSIS OF PACKERS\\' WORKLOAD ON THE PACKING LINE - A CASE STUDY

Directory of Open Access Journals (Sweden)

Andrzej Marek Lasota

2014-12-01

Full Text Available Background: One of the elements of the logistics system is the subsystem of production, which is a system composed of physical elements such as machinery and equipment, tools, and (most importantly people. In addition, systems dependent on the human operator are particularly prone to problems related to: discomfort, ensuring production quality and increases in training costs and absenteeism. Material and methods: The study was conducted in an establishment in the furniture industry, in the product packing department. The system under assessment included a position located at the conveyor belt. The aim of the study was to evaluate the load and the risk of musculoskeletal discomfort (MSD's among workers and conduct an analysis of risk factors. For the evaluation method, the Ovako Working posture Analysing System (OWAS was used. The evaluated activities related to the sequential packing of furniture in positions located at the conveyor belt. Results: The result was 7 tasks qualifying for action category (AC 1, 4 tasks for AC 2 and 5 activities for AC 4. The main risk factors influencing the negative assessment of posture were keeping the back sloped and twisted, work in a standing position and shifting weight onto one leg. Conclusions and recommendations: On each of the evaluated positions where AC 4 occurred, employees back and legs were particularly vulnerable while retrieving elements. Corrective action in these positions should be carried out as soon as possible. Ergonomic intervention should be linked to: reorganizing positions with particular emphasis on retrieving items as well as the storage of packed products; introduction of employee rotation on such positions to ensure load variation of the musculoskeletal system. After making changes on the test positions, reassessment with the OWAS method is recommended in order to verify the effectiveness of the changes.  

SAT-WIND project. Final report[Winds from satellites for offshore and coastal wind energy mapping and wind-indexing

Energy Technology Data Exchange (ETDEWEB)

Hasager, C.B.; Astrup, P.; Nielsen, M. (and others)

2007-04-15

The SAT-WIND project 'Winds from satellites for offshore and coastal wind energy mapping and wind-indexing' was a research project funded by STVF/DSF in the years 2003 to 2006 (Sagsnr. 2058-03-0006). The goal of the project was to verify the applicability of satellite wind maps derived from passive microwave, altimeter, scatterometer and imaging Synthetic Aperture Radar (SAR) technologies for wind energy tools for wind resources and wind-indexing. The study area was the Danish Seas including the North Sea, interior seas and the Baltic Sea. The report describes technical details on the satellite data sources including: 1) passive microwave (SSM/I, AMSR-E), 2) passive microwave polarimetric (WindSat), 3) scatterometer (ERS, QuikSCAT, Midori-2 and NSCAT), 4) altimeter (ERS, Topex, Poseidon, GFO-1, Jason-1), 5) SAR (ERS, Envisat). The SAR wind maps were treated in S-WAsP developed by Risoe National Laboratory in cooperation with GRAS A/S in the innovative project SAT-WIND-SMV (Sagsnr. 2104-05-0084) in the years 2005 and 2006 in parallel with SAT-WIND. The results from the SAT-WIND project are presented. These include ocean wind statistics, offshore wind resource estimates and comparison results for wind-indexing. (au)

Breaking up and getting together: evolution of symbiosis and cloning by fission in sea anemones (Genus Anthopleura).

Science.gov (United States)

Geller, J B; Walton, E D

2001-09-01

Clonal growth and symbiosis with photosynthetic zooxanthellae typify many genera of marine organisms, suggesting that these traits are usually conserved. However, some, such as Anthopleura, a genus of sea anemones, contain members lacking one or both of these traits. The evolutionary origins of these traits in 13 species of Anthopleura were inferred from a molecular phylogeny derived from 395 bp of the mitochondrial 16S rRNA gene and 410 bp of the mitochondrial cytochrome oxidase subunit III gene. Sequences from these genes were combined and analyzed by maximum-parsimony, maximum-likelihood, and neighbor-joining methods. Best trees from each method indicated a minimum of four changes in growth mode and that symbiosis with zooxanthellae has arisen independently in eastern and western Pacific species. Alternative trees in which species sharing growth modes or the symbiotic condition were constrained to be monophyletic were significantly worse than best trees. Although clade composition was mostly consistent with geographic sympatry, A. artemisia from California was included in the western Pacific clade. Likewise, A. midori from Japan was not placed in a clade containing only other Asian congeners. The history of Anthopleura includes repeated shifts between clonality and solitariness, repeated attainment of symbiosis with zooxanthellae, and intercontinental dispersal.

SAT-WIND project. Final report[Winds from satellites for offshore and coastal wind energy mapping and wind-indexing

Energy Technology Data Exchange (ETDEWEB)

Hasager, C B; Astrup, P; Nielsen, M [and others

2007-04-15

The SAT-WIND project 'Winds from satellites for offshore and coastal wind energy mapping and wind-indexing' was a research project funded by STVF/DSF in the years 2003 to 2006 (Sagsnr. 2058-03-0006). The goal of the project was to verify the applicability of satellite wind maps derived from passive microwave, altimeter, scatterometer and imaging Synthetic Aperture Radar (SAR) technologies for wind energy tools for wind resources and wind-indexing. The study area was the Danish Seas including the North Sea, interior seas and the Baltic Sea. The report describes technical details on the satellite data sources including: 1) passive microwave (SSM/I, AMSR-E), 2) passive microwave polarimetric (WindSat), 3) scatterometer (ERS, QuikSCAT, Midori-2 and NSCAT), 4) altimeter (ERS, Topex, Poseidon, GFO-1, Jason-1), 5) SAR (ERS, Envisat). The SAR wind maps were treated in S-WAsP developed by Risoe National Laboratory in cooperation with GRAS A/S in the innovative project SAT-WIND-SMV (Sagsnr. 2104-05-0084) in the years 2005 and 2006 in parallel with SAT-WIND. The results from the SAT-WIND project are presented. These include ocean wind statistics, offshore wind resource estimates and comparison results for wind-indexing. (au)

Role of well testing in civil engineering

International Nuclear Information System (INIS)

Banks, D.

1981-01-01

Purpose of well testing is to derive a value of the permeability of the geologic medium or to measure the velocity or quantity of fluid flow. The types of tests typically employed on civil engineering projects are simple borehole tests, packer or pressure tests in boreholes, permeameter tests, well pumping tests, and in-hole tests using well flow meters or tracer tests. New problem areas which demand new approaches are mentioned

Narcotic smuggling and radiography of the gastrointestinal tract

International Nuclear Information System (INIS)

Pamilo, M.; Suoranta, H.; Suramo, I.

1986-01-01

The gastrointestinal tract is being used to an increasing extent as a route for smuggling narcotics. Small, swallowed packages overwrapped with condoms or other materials are usually not detected by the customs authorities. Conventional abdominal radiography may indicate foreign bodies surrounded by a characteristic thin layer of gas and located in the gastrointestinal tract. Some short case histories, and the radiologic findings in four heroin 'body packers' are presented. (orig.)

Multilevel groundwater monitoring of hydraulic head and temperature in the eastern Snake River Plain aquifer, Idaho National Laboratory, Idaho, 2011-13

Science.gov (United States)

Twining, Brian V.; Fisher, Jason C.

2015-01-01

From 2011 to 2013, the U.S. Geological Survey’s Idaho National Laboratory (INL) Project Office, in cooperation with the U.S. Department of Energy, collected depth-discrete measurements of fluid pressure and temperature in 11 boreholes located in the eastern Snake River Plain aquifer. Each borehole was instrumented with a multilevel monitoring system (MLMS) consisting of a series of valved measurement ports, packer bladders, casing segments, and couplers.

Avaliação de parâmetros hidráulicos e manejo da irrigação por microaspersão em área de assentamento Hydraulic parameters evaluation and management of microsprinkler irrigation in settlement area

Directory of Open Access Journals (Sweden)

Fábio S. Santiago

2004-12-01

Full Text Available Este trabalho foi desenvolvido em solo aluvial do semi-árido de Pernambuco, suscetível à salinização, visando a orientar agricultores de assentamento para instalar, avaliar e manejar racionalmente sistemas de irrigação por microaspersão, para atender ao plantio da cultivar de repolho Midori. Adotando-se percentagem de área molhada igual a 100%, foram avaliados nos setores da unidade operacional a variação de vazão e pressão, os coeficientes de uniformidade (CU e a eficiência de aplicação (EA. A uniformidade da irrigação apresentou valores elevados, superiores a 93%. A eficiência de aplicação foi boa, com valores maiores que 80%. O sistema foi então utilizado na irrigação, utilizando como controle o tanque "Classe A", durante um período de 75 dias, e conduzido por um agricultor local. Considerando os riscos de salinização na área, promoveu-se lavagem contínua do solo. Foi adotado um coeficiente de lixiviação médio de 1,21, com desvio-padrão de 0,45, para o período sem precipitação. Praticamente em todo o experimento, o sentido do gradiente de potencial total da água do solo foi ascendente, com média de 1,14 e 0,21 de desvio-padrão. Preveniu-se com isso a ocorrência de ascensões capilares, estabelecendo-se um perfil drenante, bem como se manteve a condutividade elétrica da zona saturada em equilíbrio. Não foi observada a saturação do solo na zona radicular.This study has been carried out in alluvial area in the semi-arid zone of Pernambuco State, Brazil, subject to salinisation, aiming to guide local farmers to install, evaluate and to manage micro sprinkler irrigation systems, raising Midori cabbage cultivar. Adopting the area percentage of wetted soli 100% the sub units have been evaluated regarding the discharge and pressure variation, and also coefficients of uniformity (CU and efficiency of application coefficient (EA. The irrigation uniformity was high, greater than 93%. The efficiency of

Production Contracts and the Spot Market Price of Hogs

OpenAIRE

Key, Nigel D.

2010-01-01

The increasing use of production contracts in the hog sector has reduced the number of spot market transactions, raised concerns about price manipulation and helped to spur legislation requiring price reporting by packers. Using data from the 2002 and 2007 Censuses of Agriculture, this study looks for evidence of market manipulation by examining whether the local prevalence of contracting affects the average price received by independent producers. The empirical approach uses a fixed-effects ...

Is a National Pork Marketing Cooperative Viable? A Case Study of Pork America within the Context of Structural Change in the US Pork Industry

OpenAIRE

Gehrke, Brad C.; Matson, James

2000-01-01

After World War II, livestock slaughter decentralized and livestock producers increased direct sales to packers. As a result, livestock producers have been less likely than other agricultural producers to use cooperatives to market their farm production. Between 1994 and 1998, less than 15 percent of livestock and wool production was marketed through cooperatives compared with 80 percent of milk production and 40 to 50 percent of grains and oilseeds. Recent structural change in the livestock ...

Export contracts for non-traditional products: Chayote from Costa Rica

OpenAIRE

Saénz, F.; Ruben, R.

2004-01-01

This paper focuses on the determinants of market and contract choice for non-traditional crops and the possibilities for involving local producers in global agro-food chains through delivery relationships with packers and brokers. Main attention is given to the importance of quality for entering the export market and the impact of contractual arrangements on loyal behaviour. Core stipulations in the contract regarding the frequency of delivery and the provision of technical assistance are med...

9 CFR 201.30 - Amount of market agency, dealer and packer bonds.

Science.gov (United States)

2010-01-01

... coverage, divide the dollar value of livestock sold during the preceding business year, or the substantial part of that business year, in which the market agency did business, by the actual number of days on... required to comply with any State law. (b) Market agency buying on commission or dealer. The amount of bond...

Do Antibiotics Reduce Production Risk for U.S. Pork Producers?

OpenAIRE

Liu, Xuanli; Miller, Gay Y.; McNamara, Paul E.

2005-01-01

Production risk from live weight variation of market pigs has become a more important concern in U.S. swine production. Packers are concerned about the variation in carcass size because of the demand for standardized cuts and the use of automation in the slaughter process. Swine producers care about standardized pigs because of revenue implications and possible links to animal health and productivity. Pig size variation can be due to various condition and inputs including antibiotics. However...

Papain-induced occupational rhinoconjunctivitis and asthma – A case report

OpenAIRE

Tymoszuk, Diana; Wiszniewska, Marta; Walusiak-Skorupa, Jolanta

2016-01-01

This report presents a case of occupational asthma, rhinitis and conjunctivitis to papain in a 50-year-old herbs and spices packer, with documented increased eosinophilia in induced sputum and in the nasal lavage fluids after a specific inhalation challenge test (SICT) and specific nasal challenge test (SNCT) with this enzyme. Immunoglobulin E-mediated (IgE) sensitization to papain was confirmed by positive results of a skin prick test with specific solution. Specific inhalation and nasal cha...

Use of borehole-geophysical logs and hydrologic tests to characterize crystalline rock for nuclear-waste storage, Whiteshell Nuclear Research Establishment, Manitoba, and Chalk River Nuclear Laboratory, Ontario, Canada

International Nuclear Information System (INIS)

Davison, C.C.

1982-12-01

A number of borehole methods were used in the investigation of crystalline rocks at Whiteshell Nuclear Research Establishment and Chalk River Nuclear Laboratory in Canada. The selection of a crystalline-rock mass for the storage of nuclear waste likely will require the drilling and testing of a number of deep investigative boreholes in the rock mass. Although coring of at least one hole in each new area is essential, methods for making in-situ geophysical and hydrologic measurements can substitute for widespread coring and result in significant savings in time and money. Borehole-geophysical logging techniques permit the lateral extrapolation of data from a core hole. Log response is related to rock type, alteration, and the location and character of fractures. The geophysical logs that particularly are useful for these purposes are the acoustic televiewer and acoustic waveform, neutron and gamma, resistivity, temperature, and caliper. The acoustic-televiewer log of the borehole wall can provide high resolution data on the orientation and apparent width of fractures. In situ hydraulic tests of single fractures or fracture zones isolated by packers provide quantitative information on permeability, extent, and interconnection. The computer analysis of digitized acoustic waveforms has identified a part of the waveform that has amplitude variations related to permeabilities measured in the boreholes by packer tests. 38 refs., 37 figs., 4 tabs

Migration of gases through fractured argillaceous rocks: experimental work at the Reskajeage Farm Quarry site, Cornwall

International Nuclear Information System (INIS)

Elliot, T.; Tomlinson, M.J.; Holbrough, D.J.; Searle, D.M.; Foxford, K.A.

1989-03-01

The objective of the fieldwork in the Cornish slate site was to attempt in-situ testing of gas permeabilities of single fracture systems in the formation using a downhole packer. Complementary hydraulic studies at the same site are currently in process, conducted by B Watkins of Elcon Western (electrical) Ltd, Redruth. Two boreholes, BH2 and BH14 have been gas flow tested at depths between 9.85-13.30 m and 22.40-28.00 m, respectively, using oxygen-free nitrogen. Altogether 24 flow sections have been logged and continuously flow-tested over periods ranging from 1-10 hours. Seven of these flow sections were tested until steady-state flow conditions had been achieved, and at six of these levels rising/falling pressure tests were then conducted. Pressure decay tests have been performed at four test levels which had been logged as having little or no measurable gas flow. For both boreholes the recovered core has been fully logged for fracture and lithological variations, and the identified flow sections have been correlated with these logs. In the case of BH14, successful impression packering of fracture/vein patterns in the borehole wall from 5.01-18.02 m depth has been made. The fractures recorded in the impressions have been correlated with fractures logged in the recovered core over the same section of the borehole. (author)

Restricted Interval Guelph permeameter: Theory and application

International Nuclear Information System (INIS)

Freifeld, Barry M.; Oldenburg, Curtis M.

2003-01-01

A constant head permeameter system has been developed for use in small diameter boreholes with any orientation. It is based upon the original Guelph permeameter concept of using a Mariotte siphon reservoir to control the applied head. The new tool, called a Restricted Interval Guelph (RIG) permeameter uses either a single pneumatic packer or straddle packer to restrict the area through which water is allowed to flow so that the borehole wetted area is independent of the applied head. The RIG permeameter has been used at Yucca Mountain, Nevada, in the nonwelded rhyolitic Paintbrush Tuff. Analysis of the acquired data is based upon saturated-unsaturated flow theory that relies upon the quasi-linear approximation to estimate field-saturated hydraulic conductivity (Kfs) and the a parameter (sorptive number) of the exponential relative hydraulic conductivity pressure head relationship. These results are compared with a numerical model based upon the solution of the Richards equation using a van Genuchten capillary pressure-saturation formulation. The numerical model incorporates laboratory capillary pressure versus saturation functions measured from cores taken from nearby boreholes. Comparison between the analytical and numerical approaches shows that the simple analytic model is valid for analyzing the data collected. Sensitivity analysis performed with the numerical model shows that the RIG permeameter is an effective tool for estimating permeability and sorptive number for the nonwelded Paintbrush Tuff

Risk assessment for SAGD well blowouts

Energy Technology Data Exchange (ETDEWEB)

Worth, D.; Alhanati, F.; Lastiwka, M. [C-FER Technologies, Edmonton, AB (Canada); Crepin, S. [Petrocedeno, Caracas (Venezuela)

2008-10-15

This paper discussed a steam assisted gravity drainage (SAGD) pilot project currently being conducted in Venezuela's Orinoco Belt. A risk assessment was conducted as part of the pilot program in order to evaluate the use of single barrier completions in conjunction with a blowout response plan. The study considered 3 options: (1) an isolated double barrier completion with a downhole safety valve (DHSV) in the production tubing string and a packer in the production casing annulus; (2) a partially isolated completion with no DHSV and a packer in the production casing annulus; and (3) an open single barrier completion with no additional downhole barriers. A reservoir model was used to assess the blowout flowing potential of SAGD well pairs. The probability of a blowout was estimated using fault tree analysis techniques. Risk was determined for various blowout scenarios, including blowouts during normal and workover operations, as well as blowouts through various flow paths. Total risk for each completion scenario was also determined at 3 different time periods within the production life of the well pair. The possible consequences of a blowout were assessed using quantitative consequence models. Results of the study showed that environmental and economic risks were much higher for the open completion technique. Higher risks were also associated with the earlier life of the completion strings. 20 refs., 3 tabs., 19 figs.

Disease: H01667 [KEGG MEDICUS

Lifescience Database Archive (English)

Full Text Available tor cells of the cerebellum. Recently, four distinct molecular subgroups of medulloblastoma have been identi...on levels compared with SHH and Group 4 tumors.The most frequently mutated somatic gene in Group 4 medulloblastoma...9471/3 Desmoplastic nodular medulloblastoma ICD-10: C71.6 MeSH: D008527 PMID:18676356 (gene) ... AUTHORS ... de ...ulloblastoma and ependymoma: a review from a translational research perspective. ... ...Bont JM, Packer RJ, Michiels EM, den Boer ML, Pieters R ... TITLE ... Biological background of pediatric med

Interação tritrófica e influência de produtos químicos e vegetais no complexo: brássicas x traça-das-crucíferas x parasitóides de ovos Tritrofic interaction and influence of insecticides and plant products on the complex: brassica diamondback moth egg parasitoids

Directory of Open Access Journals (Sweden)

Robson Thomaz Thuler

2008-08-01

Full Text Available Objetivou-se avaliar a interação tritrófica no complexo hospedeiro-vegetal (brássicas x praga/hospedeiro-natural Plutella xylostella Linnaeus x inseto-entomófago (parasitóides - Trichogrmma pretiosum Riley e T. exiguum Pinto & Platner, associada a alguns produtos químicos e vegetais com efeito inseticida, utilizando-se os cultivares de repolho verde - Chato de quintal e híbrido Midori; roxo - Roxo precoce e Híbrido roxo - TPC00682; e couve manteiga - Geórgia e hibrido Geórgia HS20, pulverizadas com os inseticidas: lufenuron (2,52 ml/100L e deltametrina (32 ml/100L, os produtos vegetais óleo de nim a 0,16 % e extrato pirolenhoso a 3,0 %, controle (água. Foi avaliada a interação das cultivares com os compostos por meio da exposição de lagartas recém-eclodidas aos produtos, avaliando-se os insetos nas fases de desenvolvimento até a emergência dos adultos. Para avaliar o efeito desses compostos sobre os parasitóides, foram empregados ovos de uma geração F2 de P. xylostella oriunda de lagartas alimentadas com folhas de brássicas, pulverizadas com esses produtos. A associação de produtos químicos ou vegetais, com efeito inseticida, com as cultivares de brássicas permitiu o manejo mais eficaz, especialmente na interação extrato pirolenhoso x a cultivar de repolho Chato de quintal. Observa-se que a interação entre as cultivares e os produtos pode ser prejudicial à atuação do parasitóide Trichogramma, sendo necessária uma avaliação criteriosa para minimizar o efeito sobre inimigos naturais.The aim of this work was to evaluate the tritrofic interaction in brassica complex: host-vegetable (brassica vs. pest/natural-host (Plutella xylostella vs. entomophagous-insect (parasitoid - Trichogramma pretiosum and Trichogramma exiguum, combined with chemical and vegetable products with insecticide action. The cultivar used were: green cabbage - Chato de quintal and Midori hybrid; purple cabbage - Roxo Precoce and purple hybrid

TV borehole inspection and vacuum testing of roof strata

International Nuclear Information System (INIS)

Herget, G.

1982-01-01

To improve quality control of roof conditions, a program was carried out at Elliot Lake uranium mines in Ontario, Canada to test a portable TV camera system. This camera has a 29 mm diameter probe and is capable of identifying crack locations, crack width and approximate dip direction. The extent of fractures in the roof was checked with the aid of a vacuum system by placing packers in various boreholes and checking for communication. The removal of some rock bolts indicated an increase in fracture extent

Summit Station Skiway Review

Science.gov (United States)

2013-03-01

pressure, this was not very effective for increasing the strength of the skiway. However, a 60 × 60 Icon Rolling Packer (1.5 m [60 in.] width and diame...smooth drum rollers weighed 3628.7 to 9979.0 kg (8000 to 22,000 lb) (Fig. A5 ). In subsequent testing, the sheepsfoot was modified to be more...between a corrugated roller and a smooth drum roller. ERDC/CRREL TR-13-6 26 Figure A5 . 3.1-m (10-ft) diameter roller (Camm 1961). Figure A6

Hydraulic conductivity measurements with HTU at Eurajoki, Olkiluoto, drillholes OL-KR28 and OL-KR39 in 2006

International Nuclear Information System (INIS)

Haemaelaeinen, H.

2007-05-01

As a part of the site investigations for the disposal of spent nuclear fuel, hydraulic conductivity measurements were carried out in drillholes OL-KR28 and OL-KR39 at Eurajoki, Olkiluoto. The objective was to investigate the distribution of the hydraulic conductivity in the surrounding bedrock volume. Measurements were carried out during summer 2006. The total length of the borehole OL-KR28 is 656,33 m, 352 m of which was covered by 176 standard tests with 2 m packer separation as specified in the measurement plan. Respectively, OL-KR39 is 502,97 m deep and 101 similar tests were made in it covering 202 m of the hole. The measured sections are around the depths of the planned repository. Double-packer constant-head method was used throughout with nominal 200 kPa overpressure. Injection stage lasted normally 20 minutes and fall-off stage 10 minutes. The tests were often shortened if there were clear indications that the hydraulic conductivity is below the measuring range of the system. The pressure in the test section was let to stabilise at least 5 min before injection. In some test sections the test stage times were extended. Two transient (Horner and 1/Q) interpretations and one stationary-state (Moye) interpretation were made in-situ immediately after the test. The Hydraulic Testing Unit (HTU-system) is owned by Posiva Oy and it was operated by Geopros Oy. (orig.)

Antimicrobial drug resistance of Escherichia coli isolated from poultry abattoir workers at risk and broilers on antimicrobials

Directory of Open Access Journals (Sweden)

J.W. Oguttu

2008-05-01

Full Text Available Antimicrobial usage in food animals increases the prevalence of antimicrobial drug resistance among their enteric bacteria. It has been suggested that this resistance can in turn be transferred to people working with such animals, e.g. abattoir workers. Antimicrobial drug resistance was investigated for Escherichia coli from broilers raised on feed supplemented with antimicrobials, and the people who carry out evisceration, washing and packing of intestines in a high-throughput poultry abattoir in Gauteng, South Africa. Broiler carcasses were sampled from 6 farms, on each of which broilers are produced in a separate 'grow-out cycle'. Per farm, 100 caeca were randomly collected 5 minutes after slaughter and the contents of each were selectively cultured for E. coli. The minimum inhibitory concentration (MIC of each isolate was determined for the following antimicrobials : doxycycline, trimethoprim, sulphamethoxazole, ampicillin, enrofloxacin, fosfomycin, ceftriaxone and nalidixic acid. The same was determined for the faeces of 29 abattoir workers and 28 persons used as controls. The majority of isolates from broilers were resistant, especially to antimicrobials that were used on the farms in the study. Overall median MICs and the number of resistant isolates from abattoir workers (packers plus eviscerators tended to be higher than for the control group. However, no statistically significant differences were observed when the median MICs of antimicrobials used regularly in poultry and percentage resistance were compared, nor could an association between resistance among the enteric E. coli from packers and those from broilers be demonstrated.

A Review of the Multilevel Slug Test for Characterizing Aquifer Heterogeneity

Directory of Open Access Journals (Sweden)

Chia-Shyun Chen

2012-01-01

Full Text Available All aquifers are heterogeneous to a certain degree. The spatial distribution of hydraulic conductivity K(x, y, z, or aquifer heterogeneity, significantly influences the groundwater flow movement and associated solute transport. Of particular importance in designing an in-situ remediation plan is a knowledge of low-K layers because they are less accessible to remedial agents and form a bottleneck in remediation. The characterization of aquifer heterogeneity is essential to the solution of many practical and scientific groundwater problems. This article reviews the field technique using the multilevel slug test (MLST, which determines a series of K estimates at depths of interest in a well by making use of a double-packer system. The K(z obtained manifests the vertical variation of hydraulic conductivity in the vicinity of the test well, and the combination of K(z from different wells gives rise to a three-dimensional description of K(x, y, z. The MLST response is rather sensitive to hydraulic conductivity variation; e.g., it is oscillatory for highly permeable conditions (K > 5 × 10-4 m s-1 and a nonoscillatory for K < 5 × 10-4 m s-1. In this article we discuss the instrumentation of the double-packer system, the implementation of the depth-specific slug test, the data analysis methods for a spectrum of response characteristics usually observed in the field, and field applications of the MLST.

Developments in wireline in-situ rock stress measurement

Energy Technology Data Exchange (ETDEWEB)

Pedroso, Carlos [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Canas, Jesus A.; Holzberg, Bruno; Gmach, Helmut [Schlumberger Servicos de Petroleo Ltda., Rio de Janeiro, RJ (Brazil)

2008-07-01

This paper presents recent developments of in-situ stress measurements with wireline tools. The stress measurements are based on the micro hydraulic techniques that can be initialized when an interval is pressurized by pumping fluid until a tensile fracture begins or by packers fracturing (sleeve fracturing). Ultrasonic and Micro-resistivity borehole image logs (before and after the testes) are used as a complement, in order to observe the fractures created by the tests, evaluating the mechanical behavior of the formation. An offshore case study is presented, where shales and tight sandstones at depths deeper than 4500 meters depth were successfully evaluated. A workflow to succeed on stress measurements on such environments is proposed, what includes a planning phase: where breakdown pressures ranges are estimated and compared with the capacity of the tools, a Real Time Monitoring phase, where a decision tree is proposed to help on quick decisions while testing, and an interpretation phase, where appropriate techniques are indicated to evaluate the results. Also, the paper presents the main operational needs to succeed on such environments. Basically, such tests require an entirely software controlled, motorized and modular design tool consisting of dual packer (DP), pump out and flow control modules (Figure 1). These modules were upgraded for the present environment: conditions such as temperatures above 300 deg F, formation pressures above 10,000 psia, very low formation permeability, high pressure differential need and oil based mud (OBM) environment. (author)

Hydraulic Conductivity Measurements with HTU at Eurajoki, Olkiluoto, Borehole OL-KR15 and OL-KR15B, Year 2004

Energy Technology Data Exchange (ETDEWEB)

Haemaelaeinen, H.

2005-07-01

As a part of the site investigations for the disposal of spent nuclear fuel, hydraulic conductivity measurements were carried out in borehole OL-KR15 at Eurajoki, Olkiluoto. The objective was to investigate the distribution of the hydraulic conductivity in the surrounding bedrock volume. Measurements were carried out during 2003-2004 in two phases. The total length of the borehole OL-KR15 is 518,85 m and 158 45,14 m. Of the 471 ,5 m + 44,5 m total measurable length 414 m was covered with 237 standard tests with 2 m packer separation as specified in the research plan, partly with 1 m overlaps. 259 tests were initiated, but some of them ended to hardware or software errors or unsuitable parameter values. Double-packer constant-head method was used throughout with nominal 200 kPa overpressure. Injection stage lasted normally 20 minutes and fall-off stage 10 minutes. The tests were often shortened if there were clear indications that the hydraulic conductivity is below the measuring range of the system. The pressure in the test section was let to stabilise at least 5 min before injection. In some test sections the stabilisation or injection stage lasted several hours. Two transient (Horner and 1/Q) interpretations and one stationary-state (Moye) interpretation were made in-situ immediately after the test. The Hydraulic Testing Unit (HTU-system) is owned by Posiva Oy and it was operated by Geopros Oy. (orig.)

Hydraulic Conductivity Measurements with HTU at Eurajoki, Olkiluoto, Borehole OL-KR15 and OL-KR15B, Year 2004

International Nuclear Information System (INIS)

Haemaelaeinen, H.

2005-01-01

As a part of the site investigations for the disposal of spent nuclear fuel, hydraulic conductivity measurements were carried out in borehole OL-KR15 at Eurajoki, Olkiluoto. The objective was to investigate the distribution of the hydraulic conductivity in the surrounding bedrock volume. Measurements were carried out during 2003-2004 in two phases. The total length of the borehole OL-KR15 is 518,85 m and 158 45,14 m. Of the 471 ,5 m + 44,5 m total measurable length 414 m was covered with 237 standard tests with 2 m packer separation as specified in the research plan, partly with 1 m overlaps. 259 tests were initiated, but some of them ended to hardware or software errors or unsuitable parameter values. Double-packer constant-head method was used throughout with nominal 200 kPa overpressure. Injection stage lasted normally 20 minutes and fall-off stage 10 minutes. The tests were often shortened if there were clear indications that the hydraulic conductivity is below the measuring range of the system. The pressure in the test section was let to stabilise at least 5 min before injection. In some test sections the stabilisation or injection stage lasted several hours. Two transient (Horner and 1/Q) interpretations and one stationary-state (Moye) interpretation were made in-situ immediately after the test. The Hydraulic Testing Unit (HTU-system) is owned by Posiva Oy and it was operated by Geopros Oy. (orig.)

Magnetostriction of a sphere: stress development during magnetization and residual stresses due to the remanent field

Science.gov (United States)

Reich, Felix A.; Rickert, Wilhelm; Stahn, Oliver; Müller, Wolfgang H.

2017-03-01

Based on the principles of rational continuum mechanics and electrodynamics (see Truesdell and Toupin in Handbuch der Physik, Springer, Berlin, 1960 or Kovetz in Electromagnetic theory, Oxford University Press, Oxford, 2000), we present closed-form solutions for the mechanical displacements and stresses of two different magnets. Both magnets are initially of spherical shape. The first (hard) magnet is uniformly magnetized and deforms due to the field induced by the magnetization. In the second problem of a (soft) linear-magnetic sphere, the deformation is caused by an applied external field, giving rise to magnetization. Both problems can be used for modeling parts of general magnetization processes. We will address the similarities between both settings in context with the solutions for the stresses and displacements. In both problems, the volumetric Lorentz force density vanishes. However, a Lorentz surface traction is present. This traction is determined from the magnetic flux density. Since the obtained displacements and stresses are small in magnitude, we may use Hooke's law with a small-strain approximation, resulting in the Lamé- Navier equations of linear elasticity theory. If gravity is neglected and azimuthal symmetry is assumed, these equations can be solved in terms of a series. This has been done by Hiramatsu and Oka (Int J Rock Mech Min Sci Geomech Abstr 3(2):89-90, 1966) before. We make use of their series solution for the displacements and the stresses and expand the Lorentz tractions of the analyzed problems suitably in order to find the expansion coefficients. The resulting algebraic system yields finite numbers of nonvanishing coefficients. Finally, the resulting stresses, displacements, principal strains and the Lorentz tractions are illustrated and discussed.

Development and application of approaches in protein profiling for Nguni cattle

CSIR Research Space (South Africa)

Buthelezi, SG

2010-09-01

Full Text Available was repeated three times and it led to the highest amount of protein spots identified compared to the others and it will be adopted for downstream analysis. After method selection gels were ran and stained with the more sensitive SYPRO Ruby stain (Figures 3.... Analytical Biochemistry, 394:259-268. 2. Harry, J., Wilkins M. R., Herbert M. R., Packer N. H., Gooly., K. L. and Williams, K. L. 2000. Electrophoresis. Journal of Bioloy, 21:1071-1081 3. Xu, H., Hu, L., Chang, M., Jing, L., Zhang, X. and Li G. S. 2005...

A two-fluid model for vertical flow applied to CO₂ injection wells

DEFF Research Database (Denmark)

Linga, Gaute; Lund, Halvor

2016-01-01

Flow of CO2 in wells is associated with substantial variations in thermophysical properties downhole, due to the coupled transient processes involved: complex flow patterns, density changes, phase transitions, and heat transfer to and from surroundings. Large temperature variations can lead...... the well, including tubing, packer fluid, casing, cement or drilling mud, and rock formation. This enables prediction of the temperature in the well fluid and in each layer of the well. The model is applied to sudden shut-in and blowout cases of a CO2 injection well, where we employ the highly accurate...

Modelling contaminant transport using site specific data from Vaalputs

International Nuclear Information System (INIS)

Botha, J.F.

1986-01-01

The transport of a contaminant through the upper layers of the earth's surface is a complex phenomenon. To develop a model for this, requires a good understanding of the physical nature of the phenomenon. This paper discusses two difficulties frequently encountered in developing such a model - the nature of the subsurface and the mathematical representation of the unsaturated hydraulic parameters. It is proposed that information obtained from pump- and packer tests be used to circumvent the first difficulty, and that the unsaturated flow parameters be approximated by C -∞ continuous function

Field investigation into the influene of anhydrite packing on longwall gate road stability

Energy Technology Data Exchange (ETDEWEB)

Dudley, W R

1977-01-01

Strata movements around a number of longwall roadways at Easington Colliery (UK), together with pack load, convergence, and area losses were determined. The influence of relatively incompressible anhydrite packs on roadway stability was particularly studied. Closures between roadways using this type of pack were compared with those using dirt filled wood chocks. The effectiveness of a Webster packer in controlling roadway convergence was assessed at Horden Colliery. The physical properties of anhydrite/accelerator mixtures likely to influence their use as a roadside packing material was also investigated. (91 refs.)

Surface self-potential patterns related to transmissive fracture trends during a water injection test

Science.gov (United States)

DesRoches, A. J.; Butler, K. E.; MacQuarrie, K. TB

2018-03-01

Variations in self-potential (SP) signals were recorded over an electrode array during a constant head injection test in a fractured bedrock aquifer. Water was injected into a 2.2 m interval isolated between two inflatable packers at 44 m depth in a vertical well. Negative SP responses were recorded on surface corresponding to the start of the injection period with strongest magnitudes recorded in electrodes nearest the well. SP response decreased in magnitude at electrodes further from the well. Deflation of the packer system resulted in a strong reversal in the SP signal. Anomalous SP patterns observed at surface at steady state were found to be aligned with dominant fracture strike orientations found within the test interval. Numerical modelling of fluid and current flow within a simplified fracture network showed that azimuthal patterns in SP are mainly controlled by transmissive fracture orientations. The strongest SP gradients occur parallel to hydraulic gradients associated with water flowing out of the transmissive fractures into the tighter matrix and other less permeable cross-cutting fractures. Sensitivity studies indicate that increasing fracture frequency near the well increases the SP magnitude and enhances the SP anomaly parallel to the transmissive set. Decreasing the length of the transmissive fractures leads to more fluid flow into the matrix and into cross-cutting fractures proximal to the well, resulting in a more circular and higher magnitude SP anomaly. Results from the field experiment and modelling provide evidence that surface-based SP monitoring during constant head injection tests has the ability to identify groundwater flow pathways within a fractured bedrock aquifer.

The Channel Network model and field applications

International Nuclear Information System (INIS)

Khademi, B.; Moreno, L.; Neretnieks, I.

1999-01-01

The Channel Network model describes the fluid flow and solute transport in fractured media. The model is based on field observations, which indicate that flow and transport take place in a three-dimensional network of connected channels. The channels are generated in the model from observed stochastic distributions and solute transport is modeled taking into account advection and rock interactions, such as matrix diffusion and sorption within the rock. The most important site-specific data for the Channel Network model are the conductance distribution of the channels and the flow-wetted surface. The latter is the surface area of the rock in contact with the flowing water. These parameters may be estimated from hydraulic measurements. For the Aespoe site, several borehole data sets are available, where a packer distance of 3 meters was used. Numerical experiments were performed in order to study the uncertainties in the determination of the flow-wetted surface and conductance distribution. Synthetic data were generated along a borehole and hydraulic tests with different packer distances were simulated. The model has previously been used to study the Long-term Pumping and Tracer Test (LPT2) carried out in the Aespoe Hard Rock Laboratory (HRL) in Sweden, where the distance travelled by the tracers was of the order hundreds of meters. Recently, the model has been used to simulate the tracer tests performed in the TRUE experiment at HRL, with travel distance of the order of tens of meters. Several tracer tests with non-sorbing and sorbing species have been performed

Hydraulic conductivity measurements with HTU at Eurajoki, Olkiluoto, drillholes OL-KR19, OL-KR45 and OL-KR46 in 2009 and 2010

Energy Technology Data Exchange (ETDEWEB)

Haemaelaeinen, H. [Geopros Oy, Helsinki (Finland)

2011-10-15

As a part of the site investigations for the disposal of spent nuclear fuel, hydraulic conductivity measurements were carried out with HTU-equipment in drillholes OL-KR19, OL-KR45 and OL-KR46 at Eurajoki, Olkiluoto. The objective was to investigate the distribution of the hydraulic conductivity in the surrounding bedrock volume. Measurements were carried out during 2009 and 2010. The total length of the borehole OL-KR19 is 544,34 m, 241,80 m of which was covered by 121 standard tests with 2 m packer separation as specified in the measurement plan. Respectively, OL-KR45 is 1023,30 m long and 63 similar tests were made in it covering 126,00 m of the hole and OL-KR46 600,10 m long, 151 tests made covering 301,35 m. The measured sections are around the depths of the planned repository. Double-packer constant-head method was used throughout with nominal 200 kPa overpressure. Injection stage lasted normally 20 minutes and fall-off stage 10 minutes. The tests were often shortened if there were clear indications that the hydraulic conductivity is below the measuring range of the system. The pressure in the test section was let to stabilise at least 5 min before injection. In some test sections the test stage times were extended. Two transient (Horner and 1/Q) interpretations and one stationary- state (Moye) interpretation were made in-situ immediately after the test. The Hydraulic Testing Unit (HTU-system) is owned by Posiva Oy and it was operated by Geopros Oy. (orig.)

Genetic sex determination and extinction.

Science.gov (United States)

Hedrick, Philip W; Gadau, Jürgen; Page, Robert E

2006-02-01

Genetic factors can affect the probability of extinction either by increasing the effect of detrimental variants or by decreasing the potential for future adaptive responses. In a recent paper, Zayed and Packer demonstrate that low variation at a specific locus, the complementary sex determination (csd) locus in Hymenoptera (ants, bees and wasps), can result in a sharply increased probability of extinction. Their findings illustrate situations in which there is a feedback process between decreased genetic variation at the csd locus owing to genetic drift and decreased population growth, resulting in an extreme type of extinction vortex for these ecologically important organisms.

Hashish Body Packing: A Case Report

Directory of Open Access Journals (Sweden)

Manuel Jesus Soriano-Perez

2009-01-01

Full Text Available A 42-year-old African male was brought by the police to the emergency department under suspicion of drug smuggling by body-packing. Plain abdominal radiograph showed multiple foreign bodies within the gastrointestinal tract. Contrast-enhanced abdominal CT confirmed the findings, and the patient admitted to have swallowed “balls” of hashish. Body-packing is a recognized method of smuggling drugs across international borders. Body packers may present to the emergency department because of drug toxicity, intestinal obstruction, or more commonly, requested by law-enforcement officers for medical confirmation or exclusion of suspected body packing.

Dry fracture method for simultaneous measurement of in-situ stress state and material properties

International Nuclear Information System (INIS)

Serata, S.; Oka, S.; Kikuchi, S.

1996-01-01

Based on the dry fracture principle, a computerized borehole probe has been developed to measure stress state and material properties, simultaneously. The probe is designed to obtain a series of measurements in a continuing sequence along a borehole length, without any interruptive measures, such as resetting packers, taking indentation of borehole wall, overcoming, etc. The new dry fracture probe for the single fracture method is designed to overcome the difficulties posed by its ancestor which was based on the double fracture method. The accuracy of the single fracture method is confirmed by a close agreement with the theory, FE modeling and laboratory testing

Quality traits of pork semimembranosus and triceps brachii muscles sourced from the United States and Mexico.

Science.gov (United States)

Delgado-Suárez, E J; Rubio-Lozano, M S; Toledo-López, V M; Torrescano-Urrutia, G R; Ponce-Alquicira, E; Huerta-Leidenz, N

2016-12-01

The study included fresh pork semimembranosus (SM, n=289) and triceps brachii (TB, n=283) muscles sourced from meat packers of Mexico and the USA. Samples were analyzed for moisture, protein, and fat content, pH, shear force (WBSF), cook loss, water holding capacity (WHC), instrumental color, emulsion capacity (EC) and stability (ES), and consumer sensory ratings. SM from the USA had lower WBSF (P0.05) across countries. TB from Mexico had higher (Ppork exhibits better technological properties, while country of origin has less effect on consumer acceptability. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

High aspect ratio, remote controlled pumping assembly

Science.gov (United States)

Brown, Steve B.; Milanovich, Fred P.

1995-01-01

A miniature dual syringe-type pump assembly which has a high aspect ratio and which is remotely controlled, for use such as in a small diameter penetrometer cone or well packer used in water contamination applications. The pump assembly may be used to supply and remove a reagent to a water contamination sensor, for example, and includes a motor, gearhead and motor encoder assembly for turning a drive screw for an actuator which provides pushing on one syringe and pulling on the other syringe for injecting new reagent and withdrawing used reagent from an associated sensor.

[Analysis of correlation between pulmonary function and expression levels of matrix metalloproteinases-9 and tissue inhibitor of metalloproteinase-1 among toluene diisocyanate exposed workers].

Science.gov (United States)

Miao, P P; Meng, T; Jia, Q; Niu, Y; Ye, M; Ji, Y Q; Ju, R; Chen, X L; Shao, H; Zheng, Y X; Dai, Y F

2016-05-01

To investigate the effect of occupational toluene diisocyanate(TDI) exposure on matrix metalloproteinases-9 (MMP-9) and tissue inhibitor of metalloproteinase-1(TIMP-1), and analysis of the correlation of MMP-9,TIMP-1,MMP-9/TIMP-1 and lung function. In October 2014, based on cluster sampling, we conducted a cross-sectional study in a TDI production factory located in China's western region. 61 exposed workers were recruited from workers engaged in packing, operating and checking. Based on different levels of the external exposure, the packers were classified as high exposed group, while operators and checkers as low exposed group. 58 factory managers, matching age and agent, were selected as controls, having same work intense and not contacting the TDI or other allergens. The questionnaire surveys were used to obtain the agent, age, work age, smoking and drinking, personal and family allergic history, occupational history, and the recent health conditions. The levels of MMP-9 and TIMP-1 in serum of subjects were determind by ELISA. The time weighted average concentrations (8h-TWA) were used to describe the levels of TDI air exposure in working environment. Spearman correlation assay was used to investigate the correlation of MMP-9, TIMP-1, MMP-9/TIMP-1 and lung function, exposure time. 8-hour TWA means of TDI air levels in exposed group, packers, operators and checkers were 0.39, 0.76, 0.25 mg/m(3), respectively . According to the external exposure concentration, the packers were classified as high exposed group, and the operators and checkers were classified as low exposed group. In controls, low exposed group and high exposed group, the levels of MMP-9, respectively, were (807.21±347.70),(586.91±317.50),(388.94±312.01) ng/ml (χ(2)=16.69, Pcorrelation analysis showed that levels of MMP-9 were positively associated with FEV1.0, and FEV1.0/FVC (r values were 0.27, 0.25, respectively, all Pcorrelated with exposure time(r=-0.26, P=0.040). The positive correlations

Evaluation of stationary and non-stationary geostatistical models for inferring hydraulic conductivity values at Aespoe

International Nuclear Information System (INIS)

La Pointe, P.R.

1994-11-01

This report describes the comparison of stationary and non-stationary geostatistical models for the purpose of inferring block-scale hydraulic conductivity values from packer tests at Aespoe. The comparison between models is made through the evaluation of cross-validation statistics for three experimental designs. The first experiment consisted of a 'Delete-1' test previously used at Finnsjoen. The second test consisted of 'Delete-10%' and the third test was a 'Delete-50%' test. Preliminary data analysis showed that the 3 m and 30 m packer test data can be treated as a sample from a single population for the purposes of geostatistical analyses. Analysis of the 3 m data does not indicate that there are any systematic statistical changes with depth, rock type, fracture zone vs non-fracture zone or other mappable factor. Directional variograms are ambiguous to interpret due to the clustered nature of the data, but do not show any obvious anisotropy that should be accounted for in geostatistical analysis. Stationary analysis suggested that there exists a sizeable spatially uncorrelated component ('Nugget Effect') in the 3 m data, on the order of 60% of the observed variance for the various models fitted. Four different nested models were automatically fit to the data. Results for all models in terms of cross-validation statistics were very similar for the first set of validation tests. Non-stationary analysis established that both the order of drift and the order of the intrinsic random functions is low. This study also suggests that conventional cross-validation studies and automatic variogram fitting are not necessarily evaluating how well a model will infer block scale hydraulic conductivity values. 20 refs, 20 figs, 14 tabs

Using boreholes as windows into groundwater ecosystems.

Directory of Open Access Journals (Sweden)

James P R Sorensen

Full Text Available Groundwater ecosystems remain poorly understood yet may provide ecosystem services, make a unique contribution to biodiversity and contain useful bio-indicators of water quality. Little is known about ecosystem variability, the distribution of invertebrates within aquifers, or how representative boreholes are of aquifers. We addressed these issues using borehole imaging and single borehole dilution tests to identify three potential aquifer habitats (fractures, fissures or conduits intercepted by two Chalk boreholes at different depths beneath the surface (34 to 98 m. These habitats were characterised by sampling the invertebrates, microbiology and hydrochemistry using a packer system to isolate them. Samples were taken with progressively increasing pumped volume to assess differences between borehole and aquifer communities. The study provides a new conceptual framework to infer the origin of water, invertebrates and microbes sampled from boreholes. It demonstrates that pumping 5 m(3 at 0.4-1.8 l/sec was sufficient to entrain invertebrates from five to tens of metres into the aquifer during these packer tests. Invertebrates and bacteria were more abundant in the boreholes than in the aquifer, with associated water chemistry variations indicating that boreholes act as sites of enhanced biogeochemical cycling. There was some variability in invertebrate abundance and bacterial community structure between habitats, indicating ecological heterogeneity within the aquifer. However, invertebrates were captured in all aquifer samples, and bacterial abundance, major ion chemistry and dissolved oxygen remained similar. Therefore the study demonstrates that in the Chalk, ecosystems comprising bacteria and invertebrates extend from around the water table to 70 m below it. Hydrogeological techniques provide excellent scope for tackling outstanding questions in groundwater ecology, provided an appropriate conceptual hydrogeological understanding is applied.

A new species of Geodiscelis Michener & Rozen (Hymenoptera: Colletidae: Xeromelissinae) from Peru.

Science.gov (United States)

Ferrari, Rafael R

2015-10-22

A new species of the bee genus Geodiscelis Michener & Rozen, 1999, G. antiminera sp. nov., is here described and illustrated. This is the sixth species of the genus, and the second recorded from Peru. The combination of malar area ~1.5x longer than wide, wing veins dark-brown, metepisternum nearly glabrous, and medioventral process on gonocoxa conical and well-developed, separates G. antiminera sp. nov. from all other Geodiscelis species. An updated identification key for all known species is provided. Phylogenetic analyses show that G. antiminera sp. nov. belongs to the subgenus Nazcoediscelis Packer & Dumesh, 2014 and is sister to the other three species in the subgenus.

Valley Forge and the Green Bay Packers: Putting Life and Motion into Geography and History.

Science.gov (United States)

Ludwig, Gail S.

1993-01-01

Presents a learning activity in which the location of National Football League teams are used to explain geographic concepts. Contends that geography presented in most history textbooks is limited primarily to simple name-place identification. Provides maps and teaching suggestions to help students understand spatial perspective and historical…

Determination of Groundwater Velocity and Dispersion Parameters by Borehole Wall Multielectrode Geoelectrics

Science.gov (United States)

Kessels, W.; Wuttke, M. W.

2007-05-01

A single well technique to determine groundwater flow values and transport parameters is presented. Multielectrode arrays are placed at the filtered casing depth by an inflatable packer or are installed on the borehole wall behind the casing.Tracer water with a higher or lower specific electrical conductivity (salinity) which is injected between the electrodes. This tracer plume then moves into the natural groundwater flow field. The observation of this movement by geoelectric logging enables the determination of the groundwater velocity and salinity. The transport parameters "effective porosity" and "dispersion length" can also be derived. The geoelectric logging uses n borehole electrodes and two grounding electrodes. Thus, either n independent two point measurements or n*(n-1)/2 pole-to-pole measurements can be conducted to obtain a full set of geoelectric measurements. This set is used to derive all electrode combinations by applying the law of superposition and reciprocity. The tracer distribution around the borehole during and after injection depends on the hydraulic and transport parameters of the aquifer and the filter sand. The transport parameter "porosity" plus the total injected tracer volume determines the tracer distribution around the borehole. The transport parameter "dispersivity" determines the abruptness of the tracer front. The method was tested by undertaking measurements in a lab aquifer filled with sand. The results are discussed and the limitations of the method are shown. Multielectrode installations behind casing were tested in situ in the two scientific boreholes CAT-LUD-1 and CAT- LUD-1A drilled in the northern part of Germany. A multielectrode packer system was designed, built and tested in these boreholes. The results are compared with colloid observations in the borehole and hydraulic triangulation in surrounded observation wells. Here, the interpretation of these in situ measurements is mainly restricted to two point geoelectric

Design of a single-borehole hydraulic test programme allowing for interpretation-based errors

International Nuclear Information System (INIS)

Black, J.H.

1987-07-01

Hydraulic testing using packers in single boreholes is one of the most important sources of data to safety assessment modelling in connection with the disposal of radioactive waste. It is also one of the most time-consuming and expensive. It is important that the results are as reliable as possible and as accurate as necessary for the use that is made of them. There are many causes of possible error and inaccuracy ranging from poor field practice to inappropriate interpretation procedure. The report examines and attempts to quantify the size of error arising from the accidental use of an inappropriate or inadequate interpretation procedure. In doing so, it can be seen which interpretation procedure or combination of procedures results in least error. Lastly, the report attempts to use the previous conclusions from interpretation to propose forms of field test procedure where interpretation-based errors will be minimised. Hydraulic tests (sometimes known as packer tests) come in three basic forms: slug/pulse, constant flow and constant head. They have different characteristics, some measuring a variable volume of rock (dependent on hydraulic conductivity) and some having a variable duration (dependent on hydraulic conductivity). A combination of different tests in the same interval is seen as desirable. For the purposes of assessing interpretation-based errors, slug and pulse tests are considered together as are constant flow and constant head tests. The same method is used in each case to assess errors. The method assumes that the simplest analysis procedure (cylindrical flow in homogeneous isotropic porous rock) will be used on each set of field data. The error is assessed by calculating synthetic data for alternative configurations (e.g. fissured rock, anisotropic rock, inhomogeneous rock - i.e. skin - etc.) and then analyzing this data using the simplest analysis procedure. 28 refs., 26 figs

In situ permeability testing of rock salt

International Nuclear Information System (INIS)

Peterson, E.W.; Lagus, P.L.; Broce, R.D.; Lie, K.

1981-04-01

Storage of transuranic (TRU) wastes in bedded salt formations requires a knowledge of the in situ permeability of SENM rock salt. Since assumptions for safety assessments have been made in which these wastes could generate gas pressures on the order of the lithostatic pressure over geologic time scales, the permeability of the surrounding formation becomes an important parameter for determining the manner in which the gases will be contained or dispersed. This report describes the series of tests conducted in the AEC-7 borehole, located near the WIPP site, to determine the in situ gas flow characteristics of the bedded salt. In these tests, compressed air was injected into the borehole and flow into the surrounding formation measured. These measured flow rates were interpreted in terms of formation permeabilities and porosities which were, in turn, used as modeling parameters for the repository response analysis. Two series of field tests were performed. The first series consisted of a number of whole-hole flow tests conducted to provide preliminary design information required for future operation of a guarded straddle packer system capable of measuring permeabilities > or = 0.1 μdarcy. The second series of tests were conducted using the Systems, Science and Software (S-Cubed) designed guarded straddle packer system. In these interval permeability tests, 100-foot lengths of borehole were isolated and the flow characteristics of the surrounding formation examined. In this report, a complete description of the test procedures, instrumentation, and measurement techniques is first given. The analytical/numerical methods used for data interpretation are then presented, followed by results of the interval and permeability tests. (The whole-hole tests are summarized in Appendix A.) Conclusions are presented in the final section

Comparison of diagnostic value of multidetector computed tomography and X-ray in the detection of body packing

Energy Technology Data Exchange (ETDEWEB)

Bulakci, Mesut, E-mail: mesutbulakci@yahoo.com [Department of Radiology, Haseki Training and Research Hospital, 34096 Aksaray, Istanbul (Turkey); Kalelioglu, Tuba, E-mail: tubakarsakarya@hotmail.com [Department of Radiology, Haseki Training and Research Hospital, 34096 Aksaray, Istanbul (Turkey); Bulakci, Betul Bozkurt, E-mail: dr.betulbozkurt@gmail.com [Department of Family Medicine, Istanbul University, Istanbul Faculty of Medicine, 34390 Capa, Istanbul (Turkey); Kiris, Adem, E-mail: ademkiris@hotmail.com [Department of Radiology, Haseki Training and Research Hospital, 34096 Aksaray, Istanbul (Turkey)

2013-08-15

Objective: Radiologists and other clinicians are facing an increasing number of illegal drug-related medical conditions. We aimed to draw attention to this growing global problem and to highlight some of the important points related to diagnosis and follow-up of body packing. We compare the diagnostic performance of unenhanced multidetector CT (MDCT) and abdomen X-ray for the detection of drug-filled packets. Materials and methods: Sixty-seven suspects, who underwent both CT and X-ray examinations, have been included in the study. All MDCT and X-ray images were independently and retrospectively reviewed by two observers with different degrees of experience in abdomen imaging. Fifty-two of them were identified as body packers finally. Interobserver agreement, sensitivity, specificity, positive and negative predictive value were calculated. Results: Two types of packets with different characteristics were identified in all body packers. Type 1 packets (solid-state drug) were found in 41 patients and type 2 packets (liquid cocaine) in 11 patients. All statistical analyses concern the detection of any packets. That is, the whole evaluation has been performed per patient. Sensitivity/specificity values of type 1 and type 2 packets for MDCT were 100–98%/100–100% and 100–100%/100–100%, respectively. Besides, sensitivity/specificity values of type 1 and type 2 packets for X-ray were 93–90%/100–91% and 64–45%/73–71%, respectively. In addition, interobserver agreements for detection of any packets were excellent (κ = 0.96) and good (κ = 0.75) for interpretation of MDCT and X-ray, respectively. Conclusion: Unenhanced MDCT is a fast, accurate and easily used diagnostic tool with high sensitivity and specificity for the exact diagnosis of body packing.

Hydraulic Conductivity Measurements with HTU at Eurajoki, Olkiluoto, Boreholes OL-KR16, 16B, 17, 17B, 18 and 18B, Year 2004

Energy Technology Data Exchange (ETDEWEB)

Haemaelaeinen, H.

2005-07-01

As a part of the site investigations for the disposal of spent nuclear fuel, hydraulic con- ductivity measurements were carried out in boreholes OL-KR16, 16B, 17, 17 B, 18 and 18B at Eurajoki, Olkiluoto. The objective was to investigate the distribution of the hydraulic conductivity in the surrounding bedrock volume. Measurements were carried out during spring-summer 2004. The total lengths of the boreholes are: OL-KR16 170,20 m, OL-KR17 157,13 m and OL-KR18 125,49 m. Corresponding B-holes are around 45 m deep, parallel and adjacent to their 'parent' holes so representing the cased sections of them. The conbined measurable length of the holes is about 453,57 m, of which 429,15 m was covered with 217 standard tests at 2 m packer separation as specified in the research plan. 246 tests were initiated, but some had to be cancelled due to errors or unsuitable control parameters. Double-packer constant-head method was used throughout with nominal 200 kPa overpressure. Injection stage lasted normally 20 minutes and fall-off stage 10 minutes. The tests were often shortened if there were clear indications that the hydraulic conductivity is below the measuring range of the system. The pressure in the test section was let to stabilise at least 5 min before injection. In some test sections the stabilisation, injection or fall-off stage lasted several hours. Two transient (Horner and 1/Q) interpretations and one stationary-state (Moye) interpretation were made in-situ immediately after the test. The Hydraulic Testing Unit (HTU-system) is owned by Posiva Oy and it was operated by Geopros Oy. (orig.)

Summary of the Lavia borehole investications in 1984

International Nuclear Information System (INIS)

Aeikaes, T.; Oehberg, A.; Ryhaenen, V.

1985-02-01

Industrial Power Company Ltd (TVO) drilled in the spring 1984 a 1001 m deep borehole, diameter 56 mm, in Lavia. The borehole is used during the years 1984-85 for developing and testing research methods and equipment needed in site investigations of spent fuel final disposal in the future. In 1984 hydraulical and geophysical tests were made and groundwater samples were taken. The drilling site is a wide outcropped area in the northern part of the porphyritic granite formation of Lavia. Geological and fracture mapping as well as geophysical measurements on the surface were made in the area surrounding the drilling site. The bedrock consists of homonous porphyritic granite, in which quartzdiorite occurs in thin incalations. Magnetic or electric anomalies were not observed. Fracture frequency is low and the fractures appear mainly in two sets. The rock types vary in the borehole from porphyritic granite to diorite. Due to slight mineralogical variations, the diorite is either granodiorite, quartzdiorite or tonalite. Granite occurs as veins. Hydraulic conductivity was measured systematically with a packer separation of 30 m between the depths 73-973 m. Hydraulic conductivity is generally 10 -10 -10 -11 m/s. Electric, radiometric, magnetic and acoustic measurements were made in the borehole. In addition, the caliper and the temperature of the borehole were measured. The results of these geophysical measurements indicate the properties of rock types and fracturing in the borehole. On the basis of the results e.g. fracture porosity was interpreted. The results of acoustic tube wave measurement correlate well with hydraulic conductivity. Water samples were taken from four depths. The deepest level was 910 m. The samples were taken with a packer separation of 5 m. In the water analyses it was observed that at several depths remarkable amounts of flushing water from drilling were still remaining in the rock

The Lavia testborehole - a summary of the groundwater investigations in 1984-1985

International Nuclear Information System (INIS)

Wickstroem, P.; Lampen, P.

1986-06-01

In the spring of 1984, a 1001 m deep test borehole with a diameter of 56 mm was core-drilled in a granitic intrusion in Lavia in southwestern Finland. The drilling fluid which was taken from the borehole well was labelled with a stable tracer, i.e. an iodine. Gas-lift pumping by nitrogen gas was carried out after the drilling 1984 and in the spring 1985. The groundwater samples were taken with the equipment developed for deep boreholes. The equipment comprises straddle paker system with a membrane pump and a flow-through-cell system with electrodes. Specific conductivity, amount of dissolved oxygen, pS, pH, temperature and redox-potential of the groundwater samples were measured in this system. Sampling prosedure and data acquisition will be controlled by a microcomputer. The groundwater samples were taken four times at different depths during 1984 - 1985. Sampling was made from 5.4 metre packer-isolated zones from the depths 94 - 99 m, 119 - 124 m, 422 - 427 m, 547 - 552 m, 905 - 910 m and 965 - 970 m. At the depth of 9971 - 1001 m only a single packer was used. The consentration of iodine was frequently controlled during the sampling. Groundwater samples were taken for different physico-chemical analyses. Also samples for isotope and noble gas analyses were taken. The iodine analyses gave the evidence that varying amounts of drilling fluid remain in the bedrock. The analyses manifest that the groundwater of the test borehole has quite a low ionic strength. The measurements of the redox-potential and the amount of dissolved oxygen indicate that reducing conditions seem to exist at the depths of 422 - 427 m and 905 - 910 m. A percussion borehole was drilled near the test borehole without using any drilling fluid. Water samples that had not been contaminated by drilling fluid were taken once. (author)

Strategy For A/M Area Production Wells

International Nuclear Information System (INIS)

Jackson, D.G.; Looney, B.B.; Bergren, C.L.; Wells, D.G.; Beavers, B.A.

1996-01-01

Savannah River Site personnel are planning a two phase program in order to significantly reduce the amount of dissolved chlorinated solvents that are being transported to the McQueen branch Aquifer via the wellbore and gravel pack zones of the A/M Area production well system. In Phase I of the program a commercially available inflatable packer and check valve assembly will be installed inside the casing at the altitude of the McQueen Branch Confining Unit. This immediate, short term solution will eliminate the majority of the contaminant mass that is moving downward through the wellbore of the A/M Area production wells. During the packer installation process several pre- and post- testing activities are planned to aid SRS investigators in understanding the dynamics of the flow conditions and effectiveness of the installed assembly.The second phase of the program will address the small amount of contaminant mass that is moving downward through the continuous gravel pack of the production wells. The investigative data obtained during Phase I of this program will be beneficial for developing plans and appropriate actions for the Phase II activities.In addressing potential remediation actions for the dissolved solvents in the Cretaceous sediments, due to the limited vertical extent of the plume and the size, any remediation program should incorporate carefully located wells screened vertically within the plume trajectory.This optimizing approach will minimize water treatment and pumping costs and maximize the amount of contaminant removal. Flow and contaminant transport modeling scenarios are currently being developed to address the Cretaceous sediments. These efforts involve incorporating the available characterization data and the results of previous modeling work to more precisely define the extent and magnitude of this plume. SRS proposes incorporating depth discrete sampling during any future characterization effort to optimize any proposed remediation system

Subsurface microbial diversity in deep-granitic-fracture water in Colorado

Science.gov (United States)

Sahl, J.W.; Schmidt, R.; Swanner, E.D.; Mandernack, K.W.; Templeton, A.S.; Kieft, Thomas L.; Smith, R.L.; Sanford, W.E.; Callaghan, R.L.; Mitton, J.B.; Spear, J.R.

2008-01-01

A microbial community analysis using 16S rRNA gene sequencing was performed on borehole water and a granite rock core from Henderson Mine, a >1,000-meter-deep molybdenum mine near Empire, CO. Chemical analysis of borehole water at two separate depths (1,044 m and 1,004 m below the mine entrance) suggests that a sharp chemical gradient exists, likely from the mixing of two distinct subsurface fluids, one metal rich and one relatively dilute; this has created unique niches for microorganisms. The microbial community analyzed from filtered, oxic borehole water indicated an abundance of sequences from iron-oxidizing bacteria (Gallionella spp.) and was compared to the community from the same borehole after 2 weeks of being plugged with an expandable packer. Statistical analyses with UniFrac revealed a significant shift in community structure following the addition of the packer. Phospholipid fatty acid (PLFA) analysis suggested that Nitrosomonadales dominated the oxic borehole, while PLFAs indicative of anaerobic bacteria were most abundant in the samples from the plugged borehole. Microbial sequences were represented primarily by Firmicutes, Proteobacteria, and a lineage of sequences which did not group with any identified bacterial division; phylogenetic analyses confirmed the presence of a novel candidate division. This "Henderson candidate division" dominated the clone libraries from the dilute anoxic fluids. Sequences obtained from the granitic rock core (1,740 m below the surface) were represented by the divisions Proteobacteria (primarily the family Ralstoniaceae) and Firmicutes. Sequences grouping within Ralstoniaceae were also found in the clone libraries from metal-rich fluids yet were absent in more dilute fluids. Lineage-specific comparisons, combined with phylogenetic statistical analyses, show that geochemical variance has an important effect on microbial community structure in deep, subsurface systems. Copyright ?? 2008, American Society for Microbiology

Channeling experiment

International Nuclear Information System (INIS)

Abelin, H.; Birgersson, L.; Widen, H.; Aagren, T.; Moreno, L.; Neretnieks, I.

1990-07-01

Channeling of water flow and tracer transport in real fractures in a granite body at Stripa have been investigated experimentally. The experimental site was located 360 m below the ground level. Two kinds of experiments were performed. In the single hole experiments, 20 cm diameter holes were drilled about 2.5 m into the rock in the plane of the fracture. Specially designed packers were used to inject water into the fracture in 5 cm intervals all along the fracture trace in the hole. The variation of the injection flowrates along the fracture were used to determine the transmissivity variations in the fracture plane. Detailed photographs were taken from inside the hole and the visual fracture aperture was compared with the injection flowrates in the same locations. Geostatistical methods were used to evaluate the results. Five holes were measured in great detail. In addition 7 holes were drilled and scanned by simpler packer systems. A double hole experiment was performed where two parallel holes were drilled in the same fracture plane at nearly 2 m distance. Pressure pulse tests were made between the holes in both directions. Tracers were injected in 5 locations in one hole and monitored for in many locations in the other hole. The single hole experiment and the double hole experiment show that most of the fracture planes are tight but that there are open sections which form connected channels over distances of at least 2 meters. It was also found in the double hole experiment that the investigated fracture was intersected by at least one fracture between the two holes which diverted a large amount of the injected tracers to several distant locations at the tunnel wall. (authours)

Site investigation equipment developed by Teollisuuden Voima Oy

International Nuclear Information System (INIS)

Oehberg, A.

1991-02-01

Teollisuuden Voima Oy (TVO) carries out site investigations in Finland for final disposal of nuclear high level waste during 1987-2000. In order to carry out the investigations some essential equipment have been designed and constructed. The biggest insufficiency among different measuring methods was among water sampling and hydraulic testing. There are some common specifications which all of these equipment has to fulfil. The two most important are that they have to be operatable in deep slim boreholes down to 1000 meters depth with 56 mm in diameter. The main purpose of the Hydraulic Testing Unit is to determine hydraulic conductivity in crystalline rock, where water can flow primarily through fractures. In most commonly used configurations, measurement range is from 10 - 11 to 10 - 5 m/s with constant-head method. Although constant-head method is principally used, almost any known hydraulic method is possible with existing hardware. Most functions are controlled by the computer. The whole system is built into an electrically heated trailer. The system consists of inflatable packers, stainless steel rods, pressure transducers and datalogging devices. The maximum number of monitoring sections is seven. In addition to that as many blind sections as is needed to prevent vertical flow in boreholes can be installed. Water sampling is possible either with a double packer method or in conjunction with the hydraulic head monitoring equipment. The first possibility involves using the laboratory trailer and the second one using a separate pumping unit plus the laboratory trailer in a later phase when sampling is to be conducted. In the laboratory trailer there are all the measuring devices needed to control different chemical parameters (pH, Eh, pS, O 2 , conductivity and temperature) during pumping

Ponded infiltration tests at the Box Canyon site: data report and preliminary analysis

International Nuclear Information System (INIS)

Cook, Paul; Faybishenko, Boris; Freifeld, Barry; Jacobsen, Janet; Lee, Ki Ha; Salve, Rohit; Zawislanski, Peter

1998-01-01

We discuss the design and present the main results of a two-week ponded infiltration test conducted in 1996 at the Box Canyon site near the Idaho National Engineering and Environmental Laboratory. To investigate liquid flow and chemical transport in fractured basalt, the following types of instruments were installed in boreholes: tensiometers, suction lysimeters, thermistors, time domain reflectrometry probes, and electrical resisitivity probes. These probes were installed using an innovative technology of borehole instrumentation and completion using polyurethane foam injection. The probes were attached to plastic packers that were inflated using the polyurethane foam, and then the space between packers was back-filled with the foam in order to ensure the isolation of the instruments at different depths. Polyurethane foam showed great promise in enabling rapid, cost-effective installation of sensors and probes in fractured rock. A ponded infiltration test was conducted from 8/27/96 to 9/9/96, by maintaining water to an average depth of 23 cm in a rectangular infiltration pond. Within the 7 x 8 m pond, nine local infiltrometers (0.25 m diameter) were-installed to determine local values of the water flux. A slug of conservative tracer (KM) was added to the pond on 9/2/96, yielding a tracer concentration in the pond of approximately 3 g/L. The water supply to the pond was halted for two days so that the tracer concentration in the pond water would remain essentially constant. Thereafter, the water supply was re-established to maintain a constant water level. Installation procedures and measurement results for each type of probe are presented, along with a description of the data acquisition system. The attachments include a description of the calibration and testing of instrumentation. The data files can be found at the FTP site zenitMnel/ or the Web site http://www- esd.lbl.gov/ERT/inel/inel.htrnl

Habitual cocoa intake reduces arterial stiffness in postmenopausal women regardless of intake frequency: a randomized parallel-group study

Directory of Open Access Journals (Sweden)

Okamoto T

2016-11-01

Full Text Available Takanobu Okamoto,1 Ryota Kobayashi,1 Midori Natsume,2 Koichi Nakazato1 1Department of Exercise Physiology, Nippon Sport Science University, Tokyo, Japan; 2Food Sciences Research Laboratories, Meiji Co Ltd, Kanagawa, Japan Abstract: Arterial stiffness is substantially higher in postmenopausal than in premenopausal women. Daily cocoa intake has been shown to reduce central arterial stiffness in health adults, regardless of age; however, the effect of cocoa-intake frequency on arterial stiffness in postmenopausal women remains unclear. Therefore, the purpose of this study was to investigate the effects of cocoa-intake frequency on arterial stiffness in postmenopausal women. A total of 26 postmenopausal women (mean age ± standard deviation 64±12 years were randomly assigned to two groups with different cocoa-intake frequencies: one group ingested 17 g of cocoa once daily except on Sundays (every-day group, n=13, and the other ingested 17 g of cocoa twice daily every other day (every-other-day group, n=13. These intake regimens were maintained in both groups for 12 weeks. Carotid–femoral pulse-wave velocity and femoral–ankle pulse-wave velocity were measured in both groups at baseline and again at the end of the 12-week study period. Compared to baseline, both pulse-wave velocities had significantly decreased after the 12-week study period in both groups (P<0.05. However, no significant difference in degree of change was observed between the two groups. Although this study did not include a sedentary control group, these results suggest that regardless of frequency, habitual cocoa intake reduces central and peripheral arterial stiffness in postmenopausal women. Keywords: flavanol-enriched cocoa, pulse-wave velocity, intake frequency, endothelin 1

Imaging of drug smuggling by body packing.

Science.gov (United States)

Sica, Giacomo; Guida, Franco; Bocchini, Giorgio; Iaselli, Francesco; Iadevito, Isabella; Scaglione, Mariano

2015-02-01

Body packing, pushing, and stuffing are hazardous practices with complex medicolegal and social implications. A radiologist plays both a social and a medicolegal role in their assessment, and it should not be limited only to the identification of the packages but must also provide accurate information about their number and their exact location so as to prevent any package remains in the body packer. Radiologists must also be able to recognize the complications associated with these risky practices. Imaging assessment of body packing is performed essentially through plain abdominal X-ray and computed tomography scans. Ultrasound and magnetic resonance imaging, although with some advantages, actually have a limited use. Copyright © 2014 Elsevier Inc. All rights reserved.

Hydrologic testing in wells near the Idaho Chemical Processing Plant at the Idaho National Engineering Laboratory

International Nuclear Information System (INIS)

Johnson, G.S.; Olsen, J.H.; Ralston, D.R.

1994-01-01

The Snake River Plain aquifer beneath the INEL is often viewed as a 2-dimensional system, but may actually possess 3-dimensional properties of concern. A straddle-packer system is being used by the State's INEL Oversight Program to isolate specific aquifer intervals and define the 3-dimensional chemical and hydrologic characteristics of the aquifer. The hydrologic test results from wells USGS 44, 45, and 46 near the Idaho Chemical Processing Plant indicate that: (1) Vertical variation in static head is less than 0.3 feed, (2) barometric efficiencies are between 25 and 55 percent, and (3) the system responds to distant pumping as a multi-layered, but interconnected system. 3 refs., 7 figs., 3 tabs

In situ, subsurface monitoring of vapor-phase TCE using fiber optics

International Nuclear Information System (INIS)

Rossabi, J.; Colston, B. Jr.; Brown, S.; Milanovich, F.; Lee, L.T. Jr.

1993-01-01

A vapor-phase, reagent-based, fiber optic trichloroethylene (TCE) sensor developed by Lawrence Livermore National Laboratory (LLNL) was demonstrated at the Savannah River Site (SRS) in two configurations. The first incorporated the sensor into a down-well instrument bounded by two inflatable packers capable of sealing an area for discrete depth analysis. The second involved an integration of the sensor into the probe tip of the Army Corps of Engineers Waterways Experiment Station (WES) cone penetrometry system. Discrete depth measurements of vapor-phase concentrations of TCE in the vadose zone were successfully made using both configurations. These measurements demonstrate the first successful in situ sensing (as opposed to sampling) of TCE at a field site

The isotopic, chemical and dissolved gas concentrations in groundwater near Beaufort West

International Nuclear Information System (INIS)

Vogel, J.C.; Talma, A.S.; Heaton, T.H.E.

1980-01-01

Groundwater was collected from fifteen boreholes over an area of 500 sq km to the north-east of Beafort West, Cape Province, South Africa. Six boreholes were sampled at different depths using a pump equipped with inflatable packers. Samples were analysed for their carbon-14, tritium, oxygen-18, carbon-13, helium, nitrogen, argon, oxygen and radon-222 contents, uranium-234/uranium-238 activity ratios, and major ion chemistry. The study was a reconnaisance survey, but demonstrated the usefulness of multi-parameter investigations. The data are used in discussing the geohydrology of the area with emphasis on the recharge sources of groundwater in the pediment and at the foot of the surrounding escarpment

Innovations in the characterization of fractured rocks developed within the Stripa project

International Nuclear Information System (INIS)

Black, J.; Brightman, M.; Holmes, D.

1994-01-01

This text deals with the hydrogeological work that has been carried out at Stripa Mine. First of all, the philosophy applied evolved through the years, and has finally been focused on a fractured rock approach. Second, it has been necessary to develop hydraulic testing methods - such as focused packer testing - and equipment; the key of the success of the equipment that was built, was that it was fully computer controlled and able to regulate water pressures quickly, reliably and accurately. In the end, the aim of the hydrogeological testing was to characterize both the small scale fracture network and the large scale major fracture zone which composed the site. (TEC). 13 refs., 5 figs

Apparatus utilized for injecting fluids into earth formations penetrated by a well

Energy Technology Data Exchange (ETDEWEB)

Brandt, H

1967-04-06

An apparatus useful for injecting fluid into earth formations penetrated by a well consists of a tubular element which is inserted into the well. A number of axially spaced parts above the tubular element are capable of packing off chosen portions of the well casing. Flow passages in the tubular element cooperate with the packer-off, spaced parts, connecting the inside of the tubular element with the well casing. Check valves close each of the passages to fluid flow. Each check valve is sensitive to a predetermined pressure differential inside the tubular element and to the pressure on the packed-off portion of the well casing outside the tubular element, in order to control the passageway. (9 claims)

Improvement of spectrographic analyses by the use of a mechanical packer in the arc distillation technique

International Nuclear Information System (INIS)

Buffereau, M.; Deniaud, S.; Pichotin, B.; Violet, R.

1965-01-01

One studies improvement of spectrographic analysis by the 'carrier distillation' method with the help of a mechanical device. Experiments and advantages of such an apparatus are given (precision and reproducibility improvement, operator factor suppression). A routine apparatus (French patent no 976.493) is described. (authors) [fr

Effect of aging on oral and swallowing function after meal consumption

Directory of Open Access Journals (Sweden)

Hiramatsu T

2015-01-01

Full Text Available Tetsuya Hiramatsu,1,2 Hideyuki Kataoka,3 Mari Osaki,4 Hiroshi Hagino3,4 1Department of Speech Pathology and Audiology, Matsue Co-medical College, Matsue, Japan; 2Graduate School of Medical Sciences, Tottori University, 3School of Health Science, Faculty of Medicine, Tottori University, 4Rehabilitation Division, Tottori University Hospital, Yonago, Japan Background/purpose: Dysphagia may worsen due to fatigue of the infrahyoid and suprahyoid muscle groups as a result of repetitive swallowing during a meal. We investigated the hypothesis that meal consumption may reduce tongue strength and endurance in older adults (OAs.Methods: Tongue–palate pressure, oral diadochokinesis, repetitive saliva swallowing, and surface electromyography activity before and after a meal were measured in 23 young adults (YAs and 23 OA volunteers.Results: There was a statistically significant difference in both tongue pressure and the number of voluntary swallows between YAs and OAs. Peak tongue pressure was significantly lower in OAs than YAs both before and after meal consumption. The most notable finding was that the first time interval (the time from test initiation to the beginning of the first swallow was prolonged after meal consumption only in OAs, whereas the first time interval showed no difference between YAs and OAs before meal consumption with reference to the repetitive saliva swallowing test. The initiation of swallowing was prolonged by both meal consumption and aging; there was a significant interaction between these two factors. The number of repetitions of the monosyllable/pa/was statistically similar between YAs and OAs before meal consumption, but it was significantly lower in OAs after meal consumption.Conclusion: Aging leads to declining tongue pressure and motor function of the lips. It is possible that swallowing function declines in older individuals when meal consumption is prolonged, especially at the end of mealtime, as a result of their

Development of serial measurement system for three-dimensional stress determination by over-coring the strains on borehole wall

International Nuclear Information System (INIS)

Itamoto, Masaharu; Kuwabara, Kazumichi; Tanno, Takeo; Nakayama, Yoshiki; Mizuta, Yoshiaki

2007-01-01

In order to determine the three-dimensional stress state in serial order, the authors developed the serial measurement system for three-dimensional stress determination by over-coring the strains on the borehole wall. The serial stress measurements give the value of the stresses with high accuracy and bring the regional stress variations. In this paper, the authors describe the studies through FEM analysis on the effect of over-coring diameter, the influence of strain gauge length and the behavior of strain on the borehole wall, induced by biaxial external loading. We developed the multi-strain gauge mounted packer and examined it by measuring the strains on the borehole wall through biaxial loading test. The Laboratory tests showed its applicability to practical use. (author)

Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix A of Attachment 3: Calculations, Final

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

This report contains calculations for: hydraulic gradients for Alluvial Aquifer and Salt Wash Aquifer; slug test analysis to determine hydraulic conductivity for Alluvial Aquifer and Salt Wash Aquifer; average linear groundwater velocity for Alluvial Aquifer and Salt Wash Aquifer; statistical analysis of the extent of existing groundwater contamination; hydraulic gradients for Dakota/Burro Canyon Formation and Salt Wash Aquifer; slug test analysis to determine hydraulic conductivity for Dakota/Burro Canyon Formation and Perched Salt Wash Aquifer; determination of hydraulic conductivity of the Dakota/Burro Canyon Formation from Packer Tests; average linear groundwater velocity for Dakota/Burro Canyon and Salt Wash Aquifer; chemical and mineralogical characterization of core samples from the Dry Flats Disposal Site; and demonstration of low groundwater yield from Uppermost Aquifer.

Through BHA (Bottom Hole Assembly) cementing with proprietary cementing technology

Energy Technology Data Exchange (ETDEWEB)

Fanguy, Charles ' Joey' ; Mueller, Dan T. [BJ Services Company, Houston, TX (United States); Garrett, J.C. [Palm Energy Partners, LLC, Metairie, LA (United States)

2004-07-01

There are many problems that can arise when drilling into sub-normally pressured or naturally fractured zones. Lost circulation is one problem that is commonly encountered while drilling oil and gas wells. Lost circulation can lead to increased costs associated with drilling due to rig time, spreadsheet costs, and expensive mud system losses. Cement is one of the most effective treatment options, although it is not normally considered the first option because most operators are forced to trip out of the wellbore and utilize a squeeze packer. This is not always a viable option because of potential well control issues associated with the hydrostatic pressure reduction due to the losses of the whole mud. One treatment option that is commonly overlooked is pumping cement slurries through the bottom hole assembly and drill bit. This is generally not attempted for a variety of reasons. These reasons include: I Concern about 'squeezing off' of the cement in the bit II Lack of potential quality control associated with mixing 'on the fly' III Lack of the ability to test the actual mixed slurry samples The use of a pre-mixed, storable cement slurry has eliminated the concerns associated with pumping cement slurries through mud motors, MWD tools, BHA's, and drill bits. This advanced cement technology has been successfully utilized while reducing the risks associated with these lost circulation treatments. In addition, this technology has eliminated the costs associated with using a squeeze packer and the rig time required for several trips out of the wellbore. The paper will describe the premixed slurry properties and QA/QC procedures that are required for successful through the bit operations. This paper will also provide case histories of successful through the bit operation, as well as background information leading to the treatments. The case histories include successful through the bit remediation of severe lost circulation zones and as well the

''Terek-3'' a well flowmeter for hot water

Energy Technology Data Exchange (ETDEWEB)

Petrov, A; Bar-sliva, V

1979-01-01

For studying ther applicability of an injection well with injection of hot water (with temperature to 150-200/sup 0/C) it is necessary to have well flowmeters which have high sensitivity and performance capacity at this temperature. In developing the well remote flowmeter ''Terek-3'' the All-Union Scientific research and Planning-Design Institute for comprehensive automation of oil and gas industry made a decision to use a drive-less packer developed by the authors of the article for the well flowmeter ''Terek-1'' designed to study high-output wells. Because of the use of the drive-less packer, the sensitivity of the flowmeter was considerably improved and the lower limit of measurements were decreased to 60 m/sup 3//day. In order to reduce friction in the supports of the turbines, agate step bearings and cores were used made of steel 40KKhNM. The upper step bearing was installed in the instrument housing, and the lower in the body of the turbines. This reduces the possibility of its contamination in the measurement process. One should also bear in mind that with an increase in temperature, the viscosity of water diminshes (roughly 5-fold with temperature of 150/sup 0/C). Therefore, with a decrease in the influence of viscosity on the readings of the flowmeter in the instrument, a turbine was used suggested by V. I. Bar-Sliva. In this turbine the blades are separated from the step which guarantees not only the obtaining of the maximum moving momentum but also reduces the influence of the change in viscosity on the operation of the turbine. The impulse output signal obtained with rotation of the turbine with magnet is transmitted on a single-strand cable to a surface apparatus consisting of a condensator frequency meter and universal logging recorder N-381 which guarantees recording of the changed consumption on a diagram tape as a function of depth or time. Experimental samples of the well flowmeter ''Terek-3'' passed state inspection tests.

Characterizing Structural and Stratigraphic Heterogeneities in a Faulted Aquifer Using Pump Tests with an Array of Westbay Multilevel Monitoring Wells

Science.gov (United States)

Johnson, B.; Zhurina, E. N.

2001-12-01

We are developing and assessing field testing and analysis methodologies for quantitative characterization of aquifer heterogenities using data measured in an array of multilevel monitoring wells (MLW) during pumping and recovery well tests. We have developed a unique field laboratory to determine the permeability field in a 20m by 40m by 70m volume in the fault partitioned, siliciclastic Hickory aquifer system in central Texas. The site incorporates both stratigraphic variations and a normal fault system that partially offsets the aquifer and impedes cross-fault flow. We constructed a high-resolution geologic model of the site based upon 1050 m of core and a suite of geophysical logs from eleven, closely spaced (3-10m), continuously cored boreholes to depths of 125 m. Westbay multilevel monitoring systems installed in eight holes provide 94 hydraulically isolated measurement zones and 25 injection zones. A good geologic model is critical to proper installation of the MLW. Packers are positioned at all significant fault piercements and selected, laterally extensive, clay-rich strata. Packers in adjacent MLW bracket selected hydrostratigraphic intervals. Pump tests utilized two, uncased, fully penetrating irrigation wells that straddle the fault system and are in close proximity (7 to 65 m) to the MLW. Pumping and recovery transient pressure histories were measured in 85 zones using pressure transducers with a resolution of 55 Pa (0.008 psi). The hydraulic response is that of an anisotropic, unconfined aquifer. The transient pressure histories vary significantly from zone to zone in a single MLW as well as between adjacent MLW. Derivative plots are especially useful for differentiating details of pressure histories. Based on the geologic model, the derivative curve of a zone reflects its absolute vertical position, vertical stratigraphic position, and proximity to either a fault or significant stratigraphic heterogeneity. Additional forward modeling is needed to

Irradiation device

International Nuclear Information System (INIS)

Ransohoff, J.A.

1984-01-01

Carriers, after being loaded with product to be irradiated, are transported by an input-output conveyor system into an irradiation chamber where they are received in a horizontal arrangement on racks which may support different sizes and numbers of carriers. The racks are moved by a chamber conveyor system in an endless rectangular path about a radiation source. Packers shift the carriers on the racks to maintain nearest proximity to the radiation source. The carriers are shifted in position on each rack during successive rack cycles to produce even radiation exposure. The carriers may be loaded singly onto successive racks during a first cycle of movement thereof about the source, with loading of additional carriers, and/or unloading of carriers, onto each rack occurring on subsequent rack cycles of movement

Simultaneous separate exploitation of two formations by a single well in npu ocytyabrskneft

Energy Technology Data Exchange (ETDEWEB)

Gilmanov, G R; Kashapov, M T

1970-01-01

In order to produce 2 formations with a single well, various double completions are used. One procedure uses 2 parallel 2-in. tubing strings separated by packers. In some cases, production flows in both strings; in other cases, one formation flows while the other is pumped, while sometimes both formations are pumped. Among the main advantages of such completions are that paraffin can readily be scraped from tubing, while the main disadvantage is that 2 sets of equipment are used, 2 tubing strings, pump units, etc. This problem was solved by using one tubing string and mounting 2 pumps on one sucker rod string. Part of the sucker rod string in this arrangement is hollow. A schematic diagram and description of this equipment are given. The method has been successfully tested in the field.

Applicability estimation of flowmeter logging for detecting hydraulic pass

International Nuclear Information System (INIS)

Miyakawa, Kimio; Tanaka, Yasuji; Tanaka, Kazuhiro

1997-01-01

Estimation of the hydraulic pass governing hydrogeological structure contributes significantly to the siting HLW repository. Flowmeter logging can detect hydraulic passes by measuring vertical flow velocity of groundwater in the borehole. We reviewed application of this logging in situ. The hydraulic pass was detected with combination of ambient flow logging, with pumping and/or injecting induced flow logging. This application showed that the flowmeter logging detected hydraulic passes conveniently and accurately compared with other hydraulic tests. Hydraulic conductivity by using flowmeter logging was assessed above 10 -6 m/sec and within one order from comparison with injection packer tests. We suggest that appropriate application of the flowmeter logging for the siting is conducted before hydraulic tests because test sections and monitoring sections are decided rationally for procurement of quantitative hydraulic data. (author)

Stabilization and isolation of low-level liquid waste disposal sites

International Nuclear Information System (INIS)

Phillips, S.J.; Gilbert, T.W.

1987-01-01

Rockwell Hanford Operations is developing and testing equipment for stabilization and isolation of low-level radioactive liquid waste disposal sites. Stabilization and isolation are accomplished by a dynamic consolidation and particulate grout injection system. System equipment components include: a mobile grout plant for transport, mixing, and pumping of particulate grout; a vibratory hammer/extractor for consolidation of waste, backfill, and for emplacement of the injector; dynamic consolidation/injector probe for introducing grout into fill material; and an open-void surface injector that uses surface or subsurface mechanical or pneumatic packers and displacement gas filtration for introducing grout into disposal structure access piping. Treatment of a liquid-waste disposal site yields a physically stable, cementitious monolith. Additional testing and modification of this equipment for other applications to liquid waste disposal sites is in progress

Horonobe Underground Research Laboratory project overview of the pilot borehole investigation of the ventilation shaft (PB-V01). Hydrogeological investigation

International Nuclear Information System (INIS)

Yabuuchi, Satoshi; Kunimaru, Takanori; Ishii, Eiichi; Hatsuyama, Yoshihiro; Ijiri, Yuji; Matsuoka, Kiyoyuki; Ibara, Tetsuo; Matsunami, Shinjiro; Makino, Akiya

2009-02-01

The Pilot Borehole Investigation of the Ventilation Shaft was conducted in Horonobe, Hokkaido, Japan from October 2007 to March 2008. Main purpose of the investigation is to understand geological, hydrogeological and hydrochemical properties of the formation where the Ventilation Shaft has been excavated. Hydraulic packer tests show that hydraulic conductivity lies in the range from 1.1E-11 to 1.4E-7 m/sec down to 500m in depth. This heterogeneity mainly depends on the distribution and permeability of groundwater inflow points, which were detected by Fluid Electric Conductivity logging. High conductive zones were found between 263m and 290m, 355m and 370m of the depth in the pilot borehole. An effective method for reducing groundwater inflow should be considered for the deeper Ventilation Shaft excavation. (author)

A Special Application Coiled Tubing Applied Plug for Geothermal Well Casing Remediation

International Nuclear Information System (INIS)

Knudsen, S.D.; Sattler, A.R.; Staller, G.E.

1999-01-01

Casing deformation in wells is a common problem in many geothermal fields. Casing remediation is necessary to keep wells in production and occasionally, to even enter the well for an approved plug and abandonment procedure. The costly alternative to casing remediation is to incur the expense of drilling a new well to maintain production or drilling a well to intersect a badly damaged well below the deformation for abandonment purposes. The U.S. Department of Energy and the Geothermal Drilling Organization sponsor research and development work at Sandia National Laboratories in an effort to reduce these remediation expenditures. Sandia, in cooperation with Halliburton Energy Services, has developed a low cost, commercially available, bridge-plug-type packer for use in geothermal well environments. This report documents the development and testing of this tool for use in casing remediation work

Bees: An up-close look at pollinators around the world

Science.gov (United States)

Droege, Sam; Packer, Laurence

2015-01-01

While we eat, work, and sleep, bees are busy around the world. More than 20,000 species are in constant motion! They pollinate plants of all types and keep our natural world intact. In Bees, you'll find a new way to appreciate these tiny wonders. Sam Droege and Laurence Packer present more than 100 of the most eye-catching bees from around the world as you've never seen them: up-close and with stunning detail. You'll stare into alien-like faces. You'll get lost in mesmerizing colors and patterns, patches and stripes of arresting yellow or blue. Whether you linger on your first close look at the Western Domesticated Honey Bee or excitedly flip straight to the rare Dinagapostemon sicheli, there's no doubt you'll be blown away by the beauty of bees.

9 CFR 203.4 - Statement with respect to the disposition of records by packers, live poultry dealers, stockyard...

Science.gov (United States)

2010-01-01

... sheets; scale tickets received from others; inventory and products in storage; receiving records; trial... slips; production or sale tonnage reports (including recapitulations and summaries of routes, branches... sales invoices, or claims or credit memoranda; and Provided further, That microfilm copies of records...

kISMET: Stress and fracture characterization in a deep mine

Science.gov (United States)

Oldenburg, C. M.; Dobson, P. F.; Daley, T. M.; Birkholzer, J. T.; Cook, P. J.; Ajo Franklin, J. B.; Rutqvist, J.; Siler, D.; Kneafsey, T. J.; Nakagawa, S.; Wu, Y.; Guglielmi, Y.; Ulrich, C.; Marchesini, P.; Wang, H. F.; Haimson, B. C.; Sone, H.; Vigilante, P.; Roggenthen, W.; Doe, T.; Lee, M.; Mattson, E.; Huang, H.; Johnson, T. C.; Morris, J.; White, J. A.; Johnson, P. A.; Coblentz, D. D.; Heise, J.

2016-12-01

We are developing a community facility called kISMET (permeability (k) and Induced Seismicity Management for Energy Technologies) at the Sanford Underground Research Facility (SURF) in Lead, SD. The purpose of kISMET is to investigate stress and the effects of rock fabric on hydraulic fracturing. Although findings from kISMET may have broad applications that inform stress and fracturing in anisotropic rock, results will be most applicable to improving control of hydraulic fracturing for enhanced geothermal systems (EGS) in crystalline rock. At the kISMET site on the 4850 ft (1480 m depth) level of SURF, we have drilled and cored an array of nearly vertical boreholes in Precambrian phyllite. The array consists of four 50-m deep monitoring boreholes surrounding one 100-m deep borehole forming a 6 m-wide five-spot pattern at a depth of 1530 m. Previous investigations of the stress field at SURF suggest that the principal stress s1 is nearly vertical. By aligning the kISMET boreholes approximately with σ1, fractures created in the center borehole should in theory be perpendicular to σ3, the least principal horizontal stress. But the phyllite at kISMET has a strong fabric (foliation) that could influence fracturing. Stress measurements and stimulation using hydraulic fracturing will be carried out in the center borehole using a straddle packer and high-pressure pump. We will use an impression packer and image logs after stress testing and stimulation to determine fracture orientation and extent at the center borehole. In order to study the control of stress, rock fabric, and stimulation approach on size, aperture, and orientation of hydraulic fractures, we will carefully monitor the stress measurements and stimulation. For example, we will use continuous active source seismic (CASSM) in two of the monitoring boreholes to measure changes in seismic-wave velocity as water fills the fracture. Second, near real-time electrical resistance tomography (ERT) will be used in

Studies on nitrile rubber degradation in zinc bromide completion fluid and its prevention by surface fluorination

Science.gov (United States)

Vega-Cantu, Yadira Itzel

Poly(acrylonitrile-co-butadiene) or nitrile-butadiene rubber (NBR) is frequently used as an O-ring material in the oil extraction industry due to its excellent chemical properties and resistance to oil. However, degradation of NBR gaskets is known to occur during the well completion and oil extraction process where packers are exposed to completion fluids such as ZnBr2 brine. Under these conditions NBR exhibits accelerated chemical degradation resulting in embrittlement and cracking. Samples of NBR, poly(acrylonitrile) (PAN) and poly(butadiene) (PB) have been exposed to ZnBr2 based completion fluid, and analyzed by ATR and diffuse reflectance IR. Analysis shows the ZnBr2 based completion fluid promotes hydrolysis of the nitrile group to form amides and carboxylic groups. Analysis also shows that carbon-carbon double bonds in NBR are unaffected after short exposure to zinc bromide based completion fluid, but are quickly hydrolyzed in acidic bromide mixtures. Although fluoropolymers have excellent chemical resistance, their strength is less than nitrile rubber and replacing the usual gasket materials with fluoroelastomers is expensive. However, a fluoropolymer surface on a nitrile elastomer can provide the needed chemical resistance while retaining their strength. In this study, we have shown that this can be achieved by direct fluorination, a rather easy and inexpensive process. Samples of NBR O-rings have been fluorinated by exposure to F2 and F2/HF mixtures at various temperatures. Fluorination with F 2 produces the desired fluoropolymer layer; however, fluorination by F2/HF mixtures gave a smoother fluorinated layer at lower temperatures and shorter times. Fluorinated samples were exposed to ZnBr2 drilling fluid and solvents. Elemental analysis shows that the fluorinated layer eliminates ZnBr2 diffusion into the NBR polymeric matrix. It was also found that surface fluorination significantly retards the loss of mechanical properties such as elasticity, tensile

Developing a Fracture Model of the Granite Rocks Around the Research Tunnel at the Mizunami Underground Research Laboratory in Central Japan

Science.gov (United States)

Kalinina, E.; Hadgu, T.; Wang, Y.

2017-12-01

The Mizunami Underground Research Laboratory (MIU) is located in Tono area in Central Japan. It is operated by the Japan Atomic Energy Agency (JAEA) with the main purpose of providing scientific basis for the research and development of technologies needed for deep geological disposal of radioactive waste in fractured crystalline rocks. The current work is focused on the research and experiments in the tunnel located at 500 m depth. The data collected in the tunnel and exploratory boreholes were shared with the participants of the DEvelopment of COupled models and their VALidation against EXperiments (DECOVALEX), an international research and model comparison collaboration. This study describes the development of the fracture model representing granite rocks around the research tunnel. The model domain is 100x150x100m with the main experimental part of the tunnel, Closure Test Drift, located approximately in the center. The major input data were the fracture traces measured on the tunnel walls (total of 2,023 fractures), fractures observed in the horizontal borehole parallel to the tunnel, and the packer tests conducted in this borehole and one vertical borehole located within the modeling domain. 78 fractures (the ones with the inflow) in the tunnel were incorporated in the development of the fracture model. Fracture size was derived from the fracture trace analysis. It was shown that the fracture radius followed lognormal distributions. Fracture transmissivity was estimated from an analytical solution of inflow into the tunnel through an individual fracture and the total measured inflow into the tunnel. 16 fractures were incorporated in the model along the horizontal borehole. The packer test data in the different well intervals were used to estimate the range in fracture transmissivity. A relationship between the fracture transmissivity and fracture radius was developed. The fractures in the tunnel and borehole were used to derive fracture orientation and

In-situ tracer tests and models developed to understand flow paths in a shear zone at the Grimsel Test Site, Switzerland

Science.gov (United States)

Blechschmidt, I.; Martin, A. J.

2012-12-01

The Grimsel Test Site (www.grimsel.com) is an international underground research laboratory excavated at a depth of 450m below the surface in the crystalline Aare Massif of southern Switzerland in 1984. It is operated and owned by the National Cooperative for the Disposal of Radioactive Waste of Switzerland (NAGRA) which is the organization responsible for managing and researching the geological disposal of all types of radioactive wastes originating in Switzerland. One experiment, the Colloid Formation and Migration test (CFM*), is an ongoing in-situ migration test started in 2004 to study colloid facilitated transport behavior of radionuclides through a shear zone. The importance of colloid transport in the context of a radioactive waste repository is that it provides a mechanism for potentially enhancing the advective transport of radionuclides. The montmorillonite clays that are planned to be used as an engineered barrier around the radioactive waste in many repository concepts may be a source of such colloids under specific hydraulic and/or chemical boundary conditions. The CFM project includes an integrated programme of field testing, laboratory studies and modelling/interpretation. The field tests are performed in a shear zone where the natural outflow has been controlled by a tunnel packer system and flow is monitored with an array of boreholes drilled for CFM and previous experiments at the site. The flow field is controlled by a low-rate extraction from a surface packer. The controlled low-rate extraction creates a region of low hydraulic gradients and fluid velocity within the shear zone, suitable for study under repository-relevant or other geo-resource relevant conditions. Here we present a summary of the migration tracer tests carried out so far to understand the hydraulic properties and transport characteristics of the shear zone using both stable and radioactive (Na-22, Cs-137, Ba-133, Th-232, Np-237, Am-243, Pu-242) tracers as well as colloids, and

Development of In situ Geological Investigation and Test Equipment in KURT

Energy Technology Data Exchange (ETDEWEB)

Koh, Yong Kweon; Kim, Kyung Su; Park, Kyung Woo; Koh, Yong Kweon; Choi, Jong Won [KAERI, Daejeon (Korea, Republic of)

2010-12-15

For establishment of the advanced infrastructures of KURT, geological investigation and in situ test equipment were installed. The optical sensor technique could be applicable to monitoring system for the safe operation of various kinds of facilities having static and/or dynamic characteristics, such as chemical plant, pipeline, rail, huge building, long and slim structures, bridge, subway and marine vessel. etc. The micro-seismic monitoring system is able to predict the location and timing of fracturing of rock mass and rock fall around an underground openings as well as analysis on safety of various kinds of engineering structures such as nuclear facilities and other structures. The straddle packer system for hydro-testing in a deep borehole will lead to not only improve current technical level in the field of hydraulic testing but also provide important information to radioactive waste disposal technology development and site characterization project

Suprascapular nerve entrapment in newsreel cameramen.

Science.gov (United States)

Karataş, Gülçin Kaymak; Göğüş, Feride

2003-03-01

To determine presence of suprascapular nerve entrapment in a group of newsreel cameramen. Thirty-six men working as newsreel cameramen participated in the study. In addition to musculoskeletal and neurologic examinations, bilateral suprascapular nerve conduction studies and needle electromyography were performed. A group of 19 healthy, male volunteers were included in the study as normal controls for suprascapular nerve conduction studies. In newsreel cameramen, mean suprascapular nerve latency was 3.20 +/- 0.56 msec and 2.84 +/- 0.36 msec for right and left shoulders, respectively (P = 0.001). The mean latency difference between right and left suprascapular nerves was -0.05 +/- 0.19 msec in the control group and 0.36 +/- 0.58 msec in the cameramen group (P mobile camera on the shoulder might cause suprascapular nerve entrapment in newsreel cameramen. This could be considered an occupational disorder of the suprascapular nerve, like meat-packer's neuropathy.

Virtual Machine Images Management in Cloud Environments

CERN Multimedia

CERN. Geneva

2017-01-01

Nowadays, the demand for scalability in distributed systems has led a design philosophy in which virtual resources need to be configured in a flexible way to provide services to a large number of users. The configuration and management of such an architecture is challenging (e.g.: 100,000 compute cores on the private cloud together with thousands of cores on external cloud resources). There is the need to process CPU intensive work whilst ensuring that the resources are shared fairly between different users of the system, and guarantee that all nodes are up to date with new images containing the latest software configurations. Different types of automated systems can be used to facilitate the orchestration. CERN’s current system, composed of different technologies such as OpenStack, Packer, Puppet, Rundeck and Docker will be introduced and explained, together with the process used to create new Virtual Machines images at CERN.

IREDIA, el Secreto de Atram: un Videojuego para Educar en Valores

Directory of Open Access Journals (Sweden)

Álvaro García-Tejedor

2011-01-01

Full Text Available Iredia, el Secreto de Atram es un videojuego de plataformas 2D creado para XBOX 360 y PC desarrollado por el CEIEC de la Universidad Francisco de Vitoria con el objetivo de sensibilizar a niños entre 8 y 11 años sobre la discapacidad auditiva a través del edutainment (uso de los videojuegos para un propósito educativo explícito y no únicamente para entretener. El juego explica aspectos básicos de esta discapacidad a través de una aventura de toques fantásticos y está formado por cinco niveles de juego, cada uno con un objetivo didáctico diferente, donde se abordan aspectos relacionados con el sonido y la discapacidad auditiva. El desarrollo se ha basado en cuatro pilares tecnológicos, XNA, Tomahawk Engine, Editor de Niveles y SpriteSheet Packer.

Use of an analog site near Raymond, California, to develop equipment and methods for characterizing a potential high-level, nuclear waste repository site at Yucca Mountain, Nevada

International Nuclear Information System (INIS)

Umari, A.M.J.; Geldon, A.; Patterson, G.; Gemmell, J.; Earle, J.; Darnell, J.

1994-01-01

Yucca Mountain, Nevada, currently is being investigated by the U.S. Geological Survey as a potential site for a high-level nuclear waste repository. Planned hydraulic-stress and tracer tests in fractured, tuffaceous rocks below the water table at Yucca Mountain will require work at depths in excess of 1,300 feet. To facilitate prototype testing of equipment and methods to be used in aquifer tests at Yucca Mountain, an analog site was selected in the foothills of the Sierra Nevada near Raymond, California. Two of nine 250- to 300-feet deep wells drilled into fractured, granitic rocks at the Raymond site have been instrumented with packers, pressure transducers, and other equipment that will be used at Yucca Mountain. Aquifer tests conducted at the Raymond site to date have demonstrated a need to modify some of the equipment and methods conceived for use at Yucca Mountain

Correlation between movement complexity during static standing and balance function in institutionalized older adults

Directory of Open Access Journals (Sweden)

Yamagata M

2017-03-01

Full Text Available Momoko Yamagata,1 Tome Ikezoe,1 Midori Kamiya,1 Mitsuhiro Masaki,2,3 Noriaki Ichihashi1 1Human Health Sciences, Graduate School of Medicine, Kyoto University, Kyoto, 2Department of Physical Therapy, 3Institute for Human Movement and Medical Sciences, Niigata University of Health and Welfare, Niigata, Japan Purpose: Sample entropy (SampEn is an analysis to evaluate movement complexity of the center of pressure (COP. A lower value of SampEn indicates lower complexity of COP variability, that is, rigidity, and lower degrees of freedom. Previous studies reported the association of increased SampEn with improved standing balance ability in young subjects. However, no studies have examined these relationships among older adults. Thus, we aimed to investigate the relationship between SampEn and standing balance ability in older adults.Subjects and methods: The subjects were 33 institutionalized older adults (aged 82.2±6.5 years. COP during static standing was measured. The standard deviation (SD values of COP and SampEn in the sagittal and frontal planes were calculated using time series data. One-leg standing test (OLST, functional reach (FR test, and lateral reach (LR test were also measured to evaluate standing balance ability.Results: OLST, FR, and LR were 6.5±8.3 s, 19.8±5.9 cm, and 18.2±6.4 cm, respectively. Pearson correlation analysis revealed that SampEn in the sagittal plane significantly correlated with OLST (r=-0.35 and FR (r=-0.36. However, SampEn in the frontal plane and SD of COP in both sagittal and frontal planes had no relationship with any of the clinical balance tests.Conclusion: Lower SampEn implies rigidity for postural control. In the present study, it was found that lower SampEn in the sagittal plane was related to a higher balance function, which suggests that older adults utilized body rigidity to maintain postural stability as a compensative strategy. Keywords: older adults, posture, balance, standing, complexity

Efficacy of tiotropium and indacaterol monotherapy and their combination on dynamic lung hyperinflation in COPD: a random open-label crossover study

Directory of Open Access Journals (Sweden)

Fujimoto K

2017-11-01

Full Text Available Keisaku Fujimoto,1 Haruna Yamazaki,2 Midori Ura,2 Yoshiaki Kitaguchi3 1Department of Clinical Laboratory Sciences, School of Health Sciences, 2Department of Biomedical Laboratory Science, Graduate School of Medicine, 3First Department of Internal Medicine, School of Medicine, Shinshu University, Matsumoto, Japan Background and objective: The difference in efficacy of long-acting muscarinic antagonists (LAMAs and long-acting β2-agonists (LABAs for dynamic lung hyperinflation (DLH in COPD is unclear. The purpose of this study was to elucidate the difference in efficacy of LAMA and LABA alone and the combination thereof for DLH. Subjects and methods: Thirty stable patients were enrolled and randomly divided into two groups following baseline measurements. One group was treated with 5 µg tiotropium (Respimat inhaler for 4 weeks following a 4-week treatment with 150 µg indacaterol, while the other group was treated with indacaterol for 4 weeks following a 4-week treatment with tiotropium. For both groups, these treatments were followed by a combination of the two drugs for 4 weeks. Pulmonary function tests, including DLH evaluated by metronome-paced incremental hyperventilation and exercise tolerance evaluated by the shuttle-walk test, were performed at the end of each treatment period. Results: In total, 23 patients completed this study. Both tiotropium and indacaterol alone significantly increased forced expiratory volume in 1 second, exercise tolerance, and improved health status. Tiotropium significantly improved DLH, but indacaterol did not. The combination therapy resulted in further improvements in lung function and exercise tolerance, but not in DLH. Conclusion: The efficacy of tiotropium in inhibiting DLH following metronome-paced incremental hyperventilation may be superior to that of 150 µg indacaterol, although the effects on airflow obstruction were the same, and the combination therapy showed further improvement in airflow

Use of naturally occurring helium to estimate ground-water velocities for studies of geologic storage of radioactive waste

International Nuclear Information System (INIS)

Marine, I.W.

1977-01-01

In a study of the potential for storing radioactive waste in metamorphic rock at the Savannah River Plant near Aiken, South Carolina, the rate of water movement was determined to be about 0.06 m/y by analyzing gas dissolved in the water. The gas contained up to 6 percent helium, which originated from the radioactive decay of natural uranium and thorium in the crystalline rock. The residence time of the water in the rock was calculated to be 840,000 years from the quantity of uranium and thorium in the rock, their rates of radioactive decay, and the quantity of helium dissolved in the water. The estimation of ground-water velocities by the helium method is more applicable to the assessment of a geologic site for storage of radioactive waste than are velocities estimated from packer tests, pumping tests, or artificial tracer tests, all of which require extensive time and space extrapolations

Customer Service Quality in Large Supermarkets in Ibagué, Colombia: Analysis through the SERVQUAL Multidimensional Scale

Directory of Open Access Journals (Sweden)

Germán Rubio Guerrero

2014-12-01

Full Text Available Globalization is affecting all economies and their organizations seeking to maximize their profits through customer satisfaction. Within this context, large supermarkets have had significant growth; hence, it is important to know the quality of the service customers are receiving in these stores. Currently, service quality measures in these stores in the global market are scarce. This article presents the results of the measurement of the quality of service customers receive from large supermarkets in Ibagué - Colombia, by using the SERVQUAL multi-item scale, which is a tool applied to service quality, comprising five dimensions in 22 items and evaluating characteristics related to tangible aspects, reliability, responsibility, guaranty, security, and empathy. The population studied are customers who visit these supermarkets with mixed research approach (qualitative and quantitative; the results showed customer satisfaction with personnel kindness, customer attention services, agility in attention, customer care, behavior of security personnel, product promoters, merchandisers, cashiers, packers, and supervisors

Hydromechanical Imaging of Fractured-Porous Rocks Properties and Coupled Processes

Science.gov (United States)

Guglielmi, Y.; Cappa, F.; Rutqvist, J.; Wang, J. S.

2009-12-01

The High-Pulse Poroelasticity Protocol (HPPP) project is dedicated to geophysical monitoring of CO2 injection in reservoirs (http://hppp.unice.fr/), focusing currently on hydromechanical testing in carbonate rock. The HPPP probe uses fiber-optic sensors for dynamic fluid pressure/mechanical deformation measurements in boreholes, with reflection of light at specific wavelength from fiber Bragg gratings mounted between inflatable packers. The probe requires no downhole electrical supply, thus the operation is passive, with response time USA. Fruitful discussions were also initiated on testing beyond CO2 supercritical-gas phase transitions to include geochemical interactions with cement and geomicrobiological sampling along fluid columns. Column experiments are planned at the Deep Underground Science and Engineering Laboratory, USA. The feasibility is being evaluated for installing a fluid column along an escape shaft at LSBB, France. The LBNL/DUSEL and HPPP/LSBB collaboration is an example that can lead to initiatives in developing international, interdisciplinary innovations.

Site characterization and validation - equipment design and techniques used in single borehole hydraulic testing, simulated drift experiment and crosshole testing

International Nuclear Information System (INIS)

Holmes, D.C.; Sehlstedt, M.

1991-10-01

This report describes the equipment and techniques used to investigate the variation of hydrogeological parameters within a fractured crystalline rock mass. The testing program was performed during stage 3 of the site characterization and validation programme at the Stripa mine in Sweden. This programme used a multidisciplinary approach, combining geophysical, geological and hydrogeological methods, to determine how groundwater moved through the rock mass. The hydrogeological work package involved three components. Firstly, novel single borehole techniques (focused packer testing) were used to determine the distribution of hydraulic conductivity and head along individual boreholes. Secondly, water was abstracted from boreholes which were drilled to simulate a tunnel (simulated drift experiment). Locations and magnitudes of flows were measured together with pressure responses at various points in the SCV rock mass. Thirdly, small scale crosshole tests, involving detailed interference testing, were used to determine the variability of hydrogeological parameters within previously identified, significant flow zones. (au)

Field instrumentation for hydrofracturing stress measurements

International Nuclear Information System (INIS)

Bjarnason, Bjarni; Torikka, Arne.

1989-08-01

A recently developed system for rock stress measurements by the hydraulic fracturing method is documented in detail. The new equipment is intended for measurement in vertical or nearvertical boreholes, down to a maximum depth of 1000 m. The minimum borehole, diameter required is 56 mm. Downhole instrumentation comprises a straddle packer assembly for borehole fracturing, equipment for determination of fracture orientations and a pressure transducer. The downhole tools are operated by means of a multihose system, containing high pressure hydraulic tubings, signal cable and carrying wire into one hose unit. The surface components of the equipment include a system for generation and control of water pressures up to approximately 75 MPa, an hydraulically operated drum for the multihose and a data acquisition system. All surface instrumentation is permanently mounted on a truck, which also serves as power source for the instrumentation. In addition to the description of instrumentation, the theoretical fundament and the testing procedures associated with the hydraulic fracturing method are briefly outlined

Study on Dynamic Response of Downhole Tools under Perforation Impact Load

Directory of Open Access Journals (Sweden)

Liu Jun

2017-01-01

Full Text Available A model of a multibody system is established to investigate the dynamic response of an oil tube-shock absorber-perforating gun system in downhole perforation-test joint operation. In the model, the oil tube and perforating gun are modeled as elastic rods and the shock absorber is modeled as single particle system with damping and a spring. Two force continuity conditions are used to simulate the interactions among the three components. The perforation impact load is determined by an experiment of underwater explosion of perforating bullets. Using the model, the effects of charge quantity of perforating bullet, the number of shock absorbers, and the length of oil tube on the dynamic response of oil tube and packer are investigated. On this basis, a basic principle of the combination design of shock absorber and oil tube is proposed to improve the mechanical state of downhole tools. The study results can provide theoretical support for the design of downhole perforation-test joint operation.

Foreign Material in the Gastrointestinal Tract: Cocaine Packets

Directory of Open Access Journals (Sweden)

Nurten Turkel Kucukmetin

2014-01-01

Full Text Available Smuggling drugs by swallowing or inserting into a body cavity is not only a serious and growing international crime, but can also lead to lethal medical complications. The most common cause of death in ‘body packers', people transporting drugs by ingesting a packet into the gastrointestinal tract, is acute drug toxicity from a ruptured packet. However, more than 30 years after the initial report of body packing, there is still no definitive treatment protocol for the management of this patient group. The treatment strategy is determined according to the particular condition of the patient and the clinical experience of the treatment center. Surgical intervention is also less common now, due to both the use of improved packaging materials among smugglers and a shift towards a more conservative medical approach. Herein, we report a case of toxicity from ingested packets of cocaine that leaked and, despite surgery, resulted in exitus of the patient.

Crosshole investigations - details of the construction and operation of the hydraulic testing system

International Nuclear Information System (INIS)

Holmes, D.; Sehlstedt, M.

1986-05-01

The Crosshole Programme, part of the international Stripa Project is designed to evaluate the effectiveness of various remote-sensing techniques in characterising a rock mass around a repository. A multidisciplinary approach has been adopted in which various geophysical, mapping and hydrogeological methods are used to determine the location and characteristics of significant features in the rock. The Programme utilises six boreholes drilled in a fan array from the 360 metre level in the Stripa Mine, Sweden. The hydrogeological component of the work uses single and crosshole testing methods, including sinusoidal pressure testing, to locate fractures and characterise groundwater movement within them. Crosshole methods use packers to isolate portions of two boreholes which both intersect a significant feature in the rock mass. Hydraulic signals are generated in one isolated section and received in the other borehole. This report describes the design and operation of the computer-controlled system which automatically performs the hydrogeological tests. (author) 3 refs., 13 figs

Single Use Letter Report for the Verification and Validation of the RADNUC-2A and ORIGEN2 S.2 Computer Codes

International Nuclear Information System (INIS)

PACKER, M.J.

2000-01-01

This report documents the verification and validation (VandV) activities undertaken to support the use of the RADNUC2-A and ORIGEN2 S.2 computer codes for the specific application of calculating isotopic inventories and decay heat loadings for Spent Nuclear Fuel Project (SNFP) activities as described herein. Two recent applications include the reports HNF-SD-SNF-TI-009, 105-K Basin Material Design Basis Feed Description for Spent Nuclear Fuel Project Facilities, Volume 1, Fuel (Praga, 1998), and HNF-3035, Rev. 0B, MCO Gas Composition for Low Reactive Surface Areas (Packer, 1998). Representative calculations documented in these two reports were repeated using RADNUC2-A, and the results were identical to the documented results. This serves as verification that version 2A of Radnuc was used for the applications noted above; the same version was tested herein, and perfect agreement was shown. Comprehensive VandV is demonstrated for RADNUC2-A in Appendix A

Crosshole investigations - Details of the construction and operation of the hydraulic testing system

International Nuclear Information System (INIS)

Holmes, D.; Sehlstedt, M.

1986-05-01

The Crosshole Programme, part of the international Stripa Project is designed to evaluate the effectiveness of various remote-sensing techniques in characterizing a rock mass around a repository. A multidisciplinary approach has been adopted in which various geophysical, mapping and hydrogeological methods are used to determine the location and characteristics of significant features in the rock. The Programme utilises six boreholes drilled in a fan array from the 360 metre level in the Stripa Mine, Sweden. The hydrogeological component of the work uses single and crosshole testing methods, including sinusoidal pressure testing, to locate fractures and characterize groundwater movement within them. Crosshole methods use packers to isolate portions of two boreholes which both intersect a significant feature in the rock mass. Hydraulic signals are generated in one isolated section and received in the other borehole. This report describes the design and operation of the computer-controlled system which automatically performs the hydrogeological tests. (authors)

The meat industry: do we think and behave globally or locally?

Science.gov (United States)

Belk, K E; Woerner, D R; Delmore, R J; Tatum, J D; Yang, H; Sofos, J N

2014-11-01

For generations, those that produce livestock and meat generally felt that their country or geographical region (i.e., provenance) reflected a basis for product differentiation. This occurs to the extent that geography of production often is considered a "brand." For example, there exists "U.S. Grain-Fed Beef" or "Kobe Black Wagyu" or "Uruguayan Grass-Fed Lamb" or "Danish Pork." However, for most meat trade, industry has evolved beyond this. With the exception perhaps of farms onto which livestock are born, meat company's profits are not generally tied to geographical considerations. Most major companies (e.g., JBS, Marfrig, Tyson, Cargill, Danish Crown, Nippon Meat Packers, etc.) operate in multiple countries and represent to consumers the production of a number of locations. However, there also now exist entrepreneurial options for meat production and "local" sales, albeit at lesser volumes. This discussion explores "global" and "local" meat marketing options. Copyright © 2014. Published by Elsevier Ltd.

Measuring and understanding total dissolved gas pressure in groundwater

Science.gov (United States)

Ryan, C.; Roy, J. W.; Randell, J.; Castellon, L.

2009-05-01

Since dissolved gases are important to a number of aspects of groundwater (e.g. age dating, active or passive bioremediation, greenhouse gas fluxes, understanding biogeochemical processes involving gases, assessing potential impacts of coal bed methane activities), accurate concentration measurements, and understanding of their subsurface behaviour are important. Researchers have recently begun using total dissolved gas pressure (TGP) sensor measurements, more commonly applied for surface water monitoring, in concert with gas composition analyses to estimate more accurate groundwater gas concentrations in wells. We have used hydraulic packers to isolate the well screens where TDP is being measured, and pump tests to indicate that in-well degassing may reduce TDG below background groundwater levels. Thus, in gas-charged groundwater zones, TGPs can be considerably underestimated in the absence of pumping or screen isolation. We have also observed transient decreased TGPs during pumping that are thought to result from ebullition induced when the water table or water level in the well is lowered below a critical hydrostatic pressure.

Human bovine tuberculosis - remains in the differential.

LENUS (Irish Health Repository)

Bilal, Shaukat

2010-11-01

Mycobacterium bovis is a pathogen of cattle. The unpasteurized milk of affected cattle is a source of infection in humans. Despite the screening of cattle and the pasteurization of milk, M bovis has not been eradicated. A high index of clinical suspicion is needed in symptomatic patients with a history of possible exposure. At risk groups include animal workers, farmers, meat packers, vets and zoo keepers. Humans are usually infected by the aerosol route. We present two cases of human bovine tuberculosis. One was a presumptive case and the second was a confirmed case. Both responded well to antituberculous therapy. In the confirmed case, there was evidence of transmission to the partner living in the same house. Rifampicin prophylaxis was given to the exposed case. The M. bovis from the confirmed case was isoniazid resistant, in addition to having the well known resistance to pyrazinamide. Isoniazid resistance has been described before in those who are immunocompromised. We describe it in an immunocompetent patient.

Drilling and the associated drillhole measurements of the pilot hole ONK-PH5

International Nuclear Information System (INIS)

Oehberg, A.; Hirvonen, H.; Jurvanen, T.; Kemppainen, K.; Mustonen, A.; Niemonen, J.; Poellaenen, J.; Rouhiainen, P.; Rautio, T.

2006-09-01

-through packer measurements was used to give background information for the grouting design. One of the objectives of the geochemical study was to get information of the composition of ONKALO's groundwater before the construction will disturb the chemical condition. The groundwater samples were collected from the open hole without any packers. The collected groundwater samples were analysed in different laboratories. (orig.)

Nevermore pressure in annular spaces.?; Nie mehr Ringraumaktivitaeten.?

Energy Technology Data Exchange (ETDEWEB)

Nickel, Frank [Untergrundspeicher- und Geotechnologie-Systeme GmbH (UGS), Mittenwalde (Germany); Scheler, Robert [VNG-Verbundnetz Gas AG (VNG), Leipzig (Germany)

2009-11-15

Sure the exclamation mark in the headline seems provocative, because in spite of reasonable diligence and complex installations there are consistently problems with the annulus directly around the production tubing. As always the aim of every completion is to achieve a gas tight subsurface installation. Therefore the question mark makes this relevant. Certainly nothing can be totally warranted under the influences of the borehole conditions but basically in this matter a big step forward was made. Therefore it's possible, depending on the borehole length, to exclude 40 to 300 possible leakage sources. What is an established technology for cavern boreholes for years now is also possible in pore storage boreholes and even now in production boreholes for oil and natural gas. The welded tubing string installation eliminates the alternating tension-compression stress of the screw-coupling due to alternating pressure and temperature conditions. Simply the connections to the production packer and the Xmas tree are still possible causes for leakages which are now relatively easy to localize. In the article, the first time tubing installation for an underground storage borehole by welding will be explained with a specific example: on a production well which has operated for 35 years at VNG's (Verbundnetz Gas AG) UGS (underground storage) in Bad Lauchstaedt and which has been recompleted twice, there was a mid-term danger of damage to the cement sheath of the production string, due to the in-situ pressure. Therefore VNG instructed the recompletion of the borehole with packer, tubing string and Xmas tree. Besides the actual welded tube installation, the safety-related precautions before and after the welding will be presented. For this project alone several technical tools and methods were developed and used which had not been used up to now in the underground storage sector. The following key aspects are described: technologies and measures which warranted the

Articles with authors affiliated to Brazilian institutions published from 1994 to 2003 with 100 or more citations: I - the weight of international collaboration and the role of the networks

Directory of Open Access Journals (Sweden)

Abel L. Packer

2006-12-01

Full Text Available Articles with 100 citations or more in the scientific literature and with at least one author with Brazilian affiliation, were identified in the Thomson-ISI (Institute for Scientific Information Web of Science bibliometric database, covering a 10-year period, from 1994 to 2003; 248 (0.23% out of a total of 109,916 articles with Brazilian affiliation were identified. This study was primarily carried out to identify thematic nuclei of excellence in research that had major impact in the international literature (Meneghini and Packer 2006. The regional and institutional affiliation distributions of these articles follow approximately that of the total of Brazilian articles in the ISI database. However, some significant deviations are observed derived from the outstanding performance of a few groups responsible for the publication of the HC-ISI (Highly cited ISI papers. The international collaboration and the network organization of work played a fundamental role in these results. It is evident that the role played by organizations in research networks as well as the international collaborations exerted strong influence in the impact of these articles, although with distinct amplitude in the different fields.Foram identificados os artigos com um mínimo de 100 citações na literatura científica e com ao menos uma filiação brasileira, segundo a base bibliométrica Thomsom ISI, no período de 10 anos entre 1994 e 2003. Dos 109.916 artigos com filiação brasileira neste período, 248 apresentaram 100 ou mais citações, ou seja, 0,23% do total. Este levantamento foi feito primordialmente para identificar núcleos temáticos de excelência em pesquisa que tiveram maior impacto na literatura internacional (veja Meneghini and Packer 2006. As distribuições regional e institucional das afiliações desses artigos mais citados seguem aproximadamente aquela do total de artigos brasileiros na base ISI. No entanto, notam-se alguns desvios significativos

Building a network of flowers, green, and ocean. Investigation report on establishment of new energy vision in Wada Town area (Chiba Prefecture); Hana midori umi no network zukuri. Wadacho chiiki shin energy vision sakutei chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-02-01

With the idea of living together with well-blessed nature placed as the base of building the town, new energy utilization promoting measures were established spanning over ten years starting fiscal 2000. Specifically, the vision was established with the following points as the substance: introduction of new energy technologies into the agricultural and fishery industries as the basic district industry, initiative introduction into public facilities in consideration of repercussion effects brought about by the introduction, provision of energy related information by improving publicity magazines and information technologies, and expanded provision of environmental information collaborated with schools. Specific measures discussed include photovoltaic power generation, utilization of bio-mass energies made available from livestock excreta, and algae, utilization of hydro-energy through the improvement project of the Komukai dam, utilization of wind power energy and ocean wave power energy, and utilization of rape-seed oil as automotive fuel. Such educational activities will also be promoted actively as the setting of economy indexes, assistance to autonomous activities, and holding training meetings, seminars, and experience education class rooms. (NEDO)

Hydrogeologic data from the US Geological Survey test wells near Waycross, Ware County, Georgia

Science.gov (United States)

Matthews, S.E.; Krause, R.E.

1983-01-01

Two wells were constructed near Waycross, Ware County, Georgia, from July 1980 to May 1981 to collect stratigraphic, structural, geophysical, hydrologic, hydraulic, and geochemical information for the U.S. Geological Survey Tertiary Limestone Regional Aquifer-System Analysis. Data collection included geologic sampling and coring, borehole geophysical logging, packer testing, water-level measuring, water-quality sampling, and aquifer testing. In the study area, the Tertiary limestone aquifer system is about 1,300 feet thick and is confined and overlain by about 610 feet of clastic sediments. The aquifer system consists of limestone, dolomite, and minor evaporites and has high porosity and permeability. A 4-day continuous discharge aquifer test was conducted, from which a transmissivity of about 1 million feet squared per day and a storage coefficient of 0.0001 were calculated. Water from the upper part of the aquifer is of a calcium bicarbonate type. The deeper highly mineralized zone produces a sodium bicarbonate type water in which concentrations of magnesium, sulfate, chloride, sodium, and some trace metals increase with depth. (USGS)

Multilevel soil-vapor extraction test for heterogeneous soil

International Nuclear Information System (INIS)

Widdowson, M.A.; Haney, O.R.; Reeves, H.W.

1997-01-01

The design, performance, and analysis of a field method for quantifying contaminant mass-extraction rates and air-phase permeability at discrete vertical locations of the vadose zones are presented. The test configuration consists of a multiscreen extraction well and multilevel observation probes located in soil layers adjacent to the extraction well. For each level tested an inflatable packer system is used to pneumatically isolate a single screen in the extraction well, and a vacuum is applied to induce air flow through the screen. Test data include contaminant concentration and flow characteristics at the extraction well, and transient or steady-state pressure drawdown data at observation probes located at variable radii from the extraction well. The test method is applicable to the design of soil-vapor extraction (SVE) and bioventing remediation systems in a variety of geologic settings, particularly stratified soils. Application of the test method at a gasoline-polluted site located in the Piedmont physiographic region is described. Contaminant mass-extraction rates, expressed in terms of volatile hydrocarbons, varied from 0.16 to 14 kg/d

Certain possible causes of between shaft gas seepage in gas wells

Energy Technology Data Exchange (ETDEWEB)

Shikhmamedov, N.S.

1981-01-01

Investigations for casing wells are carried out at the Turkmen branch of VNIIgaz (All Union petroleum and Gas Research Institute). The presence of high bottom hole pressure that affects further development of wells was established. Thus, for example, at the Shatlyk formation bottom hole pressures reach 138/sup 0/, and the temperature of the gas at the well head - 106/sup 0/C. Because of the heating process, the casing tubes lengthen, and as a result the euqipment at the well head is raised. Thus, at wells 42 and 312 the height of equipment's rise reaches 12 and 15 cm. respectively. Due to high bottom hole pressure temperatures grouting cement is necessary, one composed of 85% cement and 15% clay powder with a water-cement factor of up to 0.9, and density 1.57-1.60 g/cm/sup 3/. The necessity to create prelimnary casing tube tension was noted. The heated casing tubes must not be cooled during well damping. Wells with high gas temperature and presence of packer at bottom hole should have temperature elongation compensators.

Development of a novel filling technique. Loading bulk particulate materials into tankers or processes

Energy Technology Data Exchange (ETDEWEB)

Farnish, R.J.; Berry, R.; Bradley, M. [Greenwich Univ., Chatham Maritime, Kent (United Kingdom). Wolfson Centre for Bulk Solids Handling Technology

2008-07-01

The majority of industrial dosing or filling operations demand high filling rates and often good repeatability of discharges. For coarse, free-flowing materials the issues of obtaining a high degree of filling efficiency are substantially less challenging than for less free-flowing or cohesive bulk particulates. Typical equipment arrangements for achieving a controlled (often dual rate) discharge of particles into a relatively small capacity container (flask, sack or big bag) often rely on either a mechanical extraction of material from a buffer (screw feeders) or the manipulation of a constricting arrangement to achieve a turn down in discharge rate. Where less freeflowing or very fine particles are being handled, the introduction of air into the powder is invariably used to modify the bulk condition of the material to a condition where discharge can be initiated and supported (typical examples being powder feed to an impeller packer, or discharge of powder into a rail or road wagon). This article will therefore report on some recent research that has been undertaken by The Wolfson Centre for Bulk Solids Handling Technology, University of Greenwich. (orig.)

Skin diseases in workers at a perfume factory.

Science.gov (United States)

Schubert, Hans-Jürgen

2006-08-01

The aim of this study is to find out the causes of skin diseases in one-third of the staff of a perfume factory, in which 10 different perfume sprays were being manufactured. Site inspection, dermatological examination and patch testing of all 26 persons at risk with 4 perfume oils and 30 ingredients of them. The results showed 6 bottlers were found suffering from allergic contact dermatitis, 2 from irritant contact dermatitis, 12 workers showed different strong reactions to various fragrances. The main causes of allergic contact dermatitis were 2 perfume oils (12 cases) and their ingredients geraniol (12 cases), benzaldehyde(9), cinnamic aldehyde (6), linalool, neroli oil, terpenes of lemon oil and orange oil (4 each). Nobody was tested positive to balsam of Peru. Job changes for office workers, packers or printers to other rooms, where they had no longer contact with fragrances, led to a settling. To conclude, automation and replacement of glass bottles by cartridges from non-fragile materials and using gloves may minimize the risk.

Jet grouting for a groundwater cutoff wall in difficult glacial soil deposits

International Nuclear Information System (INIS)

Flanagan, R.F.; Pepe, F. Jr.

1997-01-01

Jet grouting is being used as part of a groundwater cutoff wall system in a major New York City subway construction project to limit drawdowns in an adjacent PCB contamination plume. A circular test shaft of jet grout columns was conducted during the design phase to obtain wall installation parameters. The test program also included shaft wall mapping, and measurements of; inflows, piezometric levels, ground heave and temperature, and jet grout hydraulic conductivity. An axisymmetric finite element method groundwater model was established to back calculate the in-situ hydraulic conductivities of both the surrounding glacial soils and the jet grout walls by matching observed inflows and piezometric levels. The model also verified the use of packer permeability test as a tool in the field to evaluate the hydraulic conductivities of jet grout columns. Both the test program and analytic studies indicated that adjustments to the construction procedures would be required to obtain lower hydraulic conductivities of the jet grout walls for construction. A comparison is made with the conductivities estimated from the test program/analytic studies with those from the present construction

A multiplex degenerate PCR analytical approach targeting to eight genes for screening GMOs.

Science.gov (United States)

Guo, Jinchao; Chen, Lili; Liu, Xin; Gao, Ying; Zhang, Dabing; Yang, Litao

2012-06-01

Currently, the detection methods with lower cost and higher throughput are the major trend in screening genetically modified (GM) food or feed before specific identification. In this study, we developed a quadruplex degenerate PCR screening approach for more than 90 approved GMO events. This assay is consisted of four PCR systems targeting on nine DNA sequences from eight trait genes widely introduced into GMOs, such as CP4-EPSPS derived from Acetobacterium tumefaciens sp. strain CP4, phosphinothricin acetyltransferase gene derived from Streptomyceshygroscopicus (bar) and Streptomyces viridochromogenes (pat), and Cry1Ab, Cry1Ac, Cry1A(b/c), mCry3A, and Cry3Bb1 derived from Bacillus thuringiensis. The quadruplex degenerate PCR assay offers high specificity and sensitivity with the absolute limit of detection (LOD) of approximate 80targetcopies. Furthermore, the applicability of the quadruplex PCR assay was confirmed by screening either several artificially prepared samples or samples of Grain Inspection, Packers and Stockyards Administration (GIPSA) proficiency program. Copyright © 2011 Elsevier Ltd. All rights reserved.

Computed tomography to detect body packing: an unusual cause of small bowel obstruction

International Nuclear Information System (INIS)

Brown, J.A.; Phang, T.; Enns, R.; Butchart, M.K.; Filipenko, J.D.; Mason, A.C.; Cooperberg, P.I.

2002-01-01

Concealment of illicit drugs within the alimentary tract is now an established method used by both smugglers and traffickers to evade detection by authorities. Those who ingest wrapped packets of drugs to transport them across international borders are known as 'body packers,' whereas those who ingest packages of drugs upon an unexpected encounter with law enforcement agents are known as 'body stuffers' or 'quick swallowers. Although most of these individuals require no medical care, acute drug toxicity (from inadvertent leaking of contents or rupture of the drug packet) and bowel obstruction are recognized hazards of drug packet ingestion. The detection of these packets is a challenge to custom officials and police interested in preventing the import and trafficking of illegal drugs, as well as to physicians who have to treat individuals who have ingested them. We report a case of a 38-year-old intravenous drug abuser who presented with an acute small bowel obstruction secondary to an impacted intraluminal heroin balloon in the mid jejunum. The value of computed tomography (CT) in the patient's diagnostic evaluation is highlighted. (author)

Draft site characterization analysis of the site characterization report for the Basalt Waste Isolation Project, Hanford, Washington site. Appendices E through W

International Nuclear Information System (INIS)

1983-03-01

Volume 2 contains Appendices E through W: potential for large-scale pump tests in the Grande Ronde; review of hydrochemical characterization related to flow system interpretation in Hanford basalts; limitations of packer-testing for head evaluation in Hanford basalts; hydrogeologic data integration for conceptual groundwater flow models; drilling mud effects on hydrogeologic testing; site issue analyses related to the nature at the present groundwater system at the Hanford site, Washington; structural and stratigraphic characteristics related to groundwater flow at the Hanford site, Washington; seismic hazard and some examples of hazard studies at Hanford; earthquake swarms in the Columbia Plateau; seismic ground motion at depth; failure modes for the metallic waste package component; degradation mechanisms of borosilicate glass; transport and retardation of radionuclides in the waste package; determination and interpretation of redox conditions and changes in underground high-level repositories; determination and interpretation of sorption data applied to radionuclide migration in underground repositories; solubility of radionuclide compounds presented in the BWIP site characterization report; and release rate from engineered system

DTS technology: evaluation in steam injection pilots in PETROBRAS; Tecnologias DTS: avaliacao em pilotos de injecao de vapor na PETROBRAS

Energy Technology Data Exchange (ETDEWEB)

Triques, Adriana Lucia Cerri; Rodrigues, Renato Cunha; Souza, Carlos Francisco Sales de; Izetti, Ronaldo Goncalves [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2012-07-01

In oil and gas industry, downhole pressure and temperature distributed sensors can provide strategic information for production optimization throughout the field. Upon the successful implementation of a pilot for optical fiber distributed temperature monitoring of observer wells in a steam injection field, two new pilots have been implemented to also monitor injectors and producers in both cyclic and continuous injection fields strongly influenced by H2S. The pilots demonstrated that this technology is suitable to monitor producers in onshore fields under the conditions above without risks to the production. The sensors did not prove to be suitable for long term monitoring of injectors under continuous steam injection if fiber is installed inside the injection tubing. For cyclic injection applications, the development of steam injection packers is needed to guarantee casing integrity during the injection cycle. The application of the technology in offshore wells is nowadays restricted to dry completion situation. The potential applicability in submarine wells is tightly linked to the development of downhole and wellhead wet mate optical fiber connectors. (author)

Analysis of groundwater from deep boreholes in Gideaa

International Nuclear Information System (INIS)

Laurent, S.

1983-03-01

Groundwaters from two boreholes in granitic rock at an ivestigation site in Gideaa has been sampled and analysed. This is part of a larger program of geological, geophysical and hydrogeological investigations aimed at finding a suitable site for a high level radioactive waste respository. Five water-bearing levels in each borehole down to the deepest at about 500 m in the first and about 600 m in the second borehole were selected. Prior to sampling, the waterbearing level is isolated between packer sleeves. The water is then pumped to the surface where sensitive parameters such as redox potential, pH, sulphide and oxygen content are measured electrochemically on the flowing water in a system isolated from the air. Water, filter and gas samples are sent to several laboratories for further analysis. The present report is a presentation of the groundwater analysis. The reliability of the results is discussed but there is no evaluation relation to geology and hydrogeology. This report presents the basic results from the groundwater analyses to be further evaluated by experts in different fields. (Forf)

Geological assessment of crystalline rock formations with a view to radioactive waste disposal

International Nuclear Information System (INIS)

Mather, J.D.

1984-01-01

Field work has been concentrated at the Altnabreac Research Site on north-east Scotland, where three deep boreholes to approximately 300 m and 24 shallow boreholes to approximately 40 m were drilled. The movement of groundwater within 300 m of the surface was investigated using a specially developed straddle packer system. Geochemical studies have demonstrated that most groundwater is dominated by recent recharge but one borehole yielded water with an age of around 10 4 years. Geophysical borehole logging has shown that the full wave train sonic logs and the acoustic logs show most promise for the assessment of crystalline rocks. In the laboratory the interaction of rocks and groundwater at the temperature/pressure conditions to be expected in a repository has established the geochemical environment to which waste canisters and backfill materials would be subjected. Other generic studies reported include the characterization of geotechnical properties of rocks at elevated temperatures and pressures, the development of a new cross-hole sinusoidal pressure test for the measurement of hydraulic properties and the use of thermal infra-red imagery to detect groundwater discharge zones

Analysis of groundwater from deep boreholes in Svartboberget

International Nuclear Information System (INIS)

Laurent, S.

1983-06-01

Groundwater from two boreholes in granitic rock at an investigation site in Svartboberget has been sampled and analysed. This is part of a larger program of geological, geophysical and hydrogeological investigations aimed at finding a suitable site for a high level radioactive waste repository. Four water-bearing levels in each borehole down to the deepest at about 600m were selected. Prior to sampling, the water-bearing level is isolated between packer sleeves. The water is then pumped to the surface where sensitive parameters such as redox potential, pH, sulphide and oxygen content are measured electrochemically on the flowing water in a system isolated from the air. Water, filter and gas samples are sent to several laboratories for further analysis. The present report is a presentation of the results of the groundwater analyses. The reliability of the results is discussed but there is no evaluation in relation to geology and hydrogeology. This report presents the basic results from the groundeater analyses to be further evaluated by experts in different fields. (author)

The SKI SITE-94 project approach to analyzing confidence in site-specific data

International Nuclear Information System (INIS)

Dverstorp, B.; Andersson, J.

1995-01-01

The ongoing SKI SITE-94 project is a fully integrated performance assessment based on a hypothetical repository at 500 m depth in crystalline rock. One main objective of the project is to develop a methodology for incorporating data from a site characterization into the performance assessment. The hypothetical repository is located at SKB's Hard Rock Laboratory at Aspo in south-eastern Sweden. The site evaluation in SITE-94 uses data from the pre-excavation phase that comprised measurements performed on the ground and in boreholes, including cross-hole hydraulic and tracer experiments. Uncertainties related to measurement technique, equipment and methods for interpretation were evaluated through a critical review of geohydraulic measurement methods and a complete re-evaluation of the hydraulic packer tests using the generalised radial flow (GRF) theory. Groundwater chemistry samples were analyzed for representativeness and sampling errors. A wide range of site models within geology, hydrogeology, geochemistry and rock mechanics has been developed and tested with the site characterization data. (authors). 10 refs., 3 figs., 2 tabs

9 CFR 203.2 - Statement of general policy with respect to the giving by meat packers of meat and other gifts to...

Science.gov (United States)

2010-01-01

... anything of value with intent to influence such employee in the discharge of his duties, or for such..., grading, reporting, or regulatory duties directly relating to the purchase or sale of livestock or the...

Scaling relationship between corner frequencies and seismic moments of ultra micro earthquakes estimated with coda-wave spectral ratio -the Mponeng mine in South Africa

Science.gov (United States)

Wada, N.; Kawakata, H.; Murakami, O.; Doi, I.; Yoshimitsu, N.; Nakatani, M.; Yabe, Y.; Naoi, M. M.; Miyakawa, K.; Miyake, H.; Ide, S.; Igarashi, T.; Morema, G.; Pinder, E.; Ogasawara, H.

2011-12-01

Scaling relationship between corner frequencies, fc, and seismic moments, Mo is an important clue to understand the seismic source characteristics. Aki (1967) showed that Mo is proportional to fc-3 for large earthquakes (cubic law). Iio (1986) claimed breakdown of the cubic law between fc and Mo for smaller earthquakes (Mw law holds even for micro earthquakes (-1 4) by using high quality data observed at a deep borehole (Abercrombie, 1995; Ogasawara et al., 2001; Hiramatsu et al., 2002; Yamada et al., 2007). In order to clarify the scaling relationship for smaller earthquakes (Mw Africa. We used 4 tri-axial accelerometers of three-component that have a flat response up to 25 kHz. They were installed to be 10 to 30 meters apart from each other at 3,300 meters deep. During the period from 2008/10/14 to 2008/10/30 (17 days), 8,927 events were recorded. We estimated fc and Mo for 60 events (-3 Common practice is using direct waves from adjacent events. However, there were only 5 event pairs with the distance between them less than 20 meters and Mw difference over one. In addition, the observation array is very small (radius less than 30 m), which means that effects of directivity and radiation pattern on direct waves are similar at all stations. Hence, we used spectral ratio of coda waves, since these effects are averaged and will be effectively reduced (Mayeda et al., 2007; Somei et al., 2010). Coda analysis was attempted only for relatively large 20 events (we call "coda events" hereafter) that have coda energy large enough for analysis. The results agree with those of the direct S-wave analysis for the same events, though the latter showed more scattering in fc-Mo trend. So, we combine the results from the both analyses to examine the fc-Mo trend down to very small events. Therefore, we adopted fc and (relative) Mo estimated from coda spectral ratios for coda events, while we adopted them from direct spectra for other events despite of their lower reliability. We

Long-term pumping test in borehole KR24 flow measurements

Energy Technology Data Exchange (ETDEWEB)

Rouhiainen, P.; Poellaenen, J. [PRG-Tec Oy, Espoo (Finland)

2005-09-15

The Difference Flow method can be used for the relatively fast determination of transmissivity and hydraulic head in fractures or fractured zones in cored boreholes. In this study, the Difference Flow method was used for hydraulic crosshole interference tests. The tests were performed in boreholes KR24 (pumped borehole) KR4, KR7, KR8, KRlO, KR14, KR22, KR22B, KR26, KR27, KR27B, KR28 and KR28B at Olkiluoto during the first and second quarters of 2004. The distance between the boreholes varies from approximately tens of meters to hundreds of meters. All the measurements were carried out in open boreholes, i.e. no packers were used. For interpretation, a normal single hole test was first performed in each borehole. Flow rates and drawdown were first measured both without pumping and with pumping the borehole under test. For practical reasons, the data set is neither complete nor similar in all tested boreholes. Connected flow to borehole KR24 was detected in all these boreholes. These flow responses were concentrated on a few zones. (orig.)

Gravel packing dual zones in one trip reduces offshore completion time

International Nuclear Information System (INIS)

Brannon, D.H.; Harrison, D.T.; van Sickle, E.W.

1991-01-01

A single trip, dual-zone gravel pack system was used to successfully gravel pack two wells on Green Canyon platform 52 A in the Gulf of Mexico. An average 56 hours was saved on each well, representing reductions of about 25% in completion time and 26% in completion cost per well. Time-sensitive costs had the largest impact on Green Canyon 52 A final well completion cost; therefore, new technology or more efficient operations were required to minimize completion time. One way to enhance project economics was to gravel pack two separate zones in one trip. In this paper, four objectives are addressed during development of a single trip tool to gravel pack the stacked zones of the Marquette project. These were time and cost reduction, removal of loss circulation material (LCM) prior to gravel packing, zone isolation during gravel packing and use of conventional gravel placement techniques. The design requirement that all LCM (salt and/or viscous polymer pills), perforation debris and formation sand be removed from the wellbore prior to gravel packing was accomplished by incorporating a washdown feature that allows circulation at the bottom of the gravel pack assembly prior to landing in the sump packer

[Application of occupational hazard risk index model in occupational health risk assessment in a decorative coating manufacturing enterprises].

Science.gov (United States)

He, P L; Zhao, C X; Dong, Q Y; Hao, S B; Xu, P; Zhang, J; Li, J G

2018-01-20

Objective: To evaluate the occupational health risk of decorative coating manufacturing enterprises and to explore the applicability of occupational hazard risk index model in the health risk assessment, so as to provide basis for the health management of enterprises. Methods: A decorative coating manufacturing enterprise in Hebei Province was chosen as research object, following the types of occupational hazards and contact patterns, the occupational hazard risk index model was used to evaluate occupational health risk factors of occupational hazards in the key positions of the decorative coating manufacturing enterprise, and measured with workplace test results and occupational health examination. Results: The positions of oily painters, water-borne painters, filling workers and packers who contacted noise were moderate harm. And positions of color workers who contacted chromic acid salts, oily painters who contacted butyl acetate were mild harm. Other positions were harmless. The abnormal rate of contacting noise in physical examination results was 6.25%, and the abnormality was not checked by other risk factors. Conclusion: The occupational hazard risk index model can be used in the occupational health risk assessment of decorative coating manufacturing enterprises, and noise was the key harzard among occupational harzards in this enterprise.

Single-borehole techniques

International Nuclear Information System (INIS)

Klotz, D.; Moser, H.; Trimborn, P.

1978-01-01

Proceeding on the theoretical considerations and on the experience and practice derived from laboratory and field testing, a system consisting of tracer injection units, detector units, measuring probe units and packers is presented, from which the different borehole probes required can be combined. A couple of examples of recent applications shows the position of the Single-Borehole Techniques with respect to the traditional methods used for the measurement of the ground-water flow. A confrontation of the permeabilities of different aquifers consents, both on the basis of the Single-Borehole Techniques as by pumping experiments, the determination of the reliability of the Point-Dilution-Method. The Point-Dilution-Method is giving information about the vertical and horizontal distribution of the permeabilities in an aquifer. By measuring the vertical current in two karst wells, the tributary horizons of a well have been determined, which gave valuable information for the subsequent well construction. Local leakages could be detected by measuring the vertical flow rate through observation wells arranged along a grout curtain erected on both sides of the retaining barrage of the Keban dam. (orig.) [de

Measurement of in-situ hydraulic conductivity in the Cretaceous Pierre Shale

International Nuclear Information System (INIS)

Neuzil, C.E.; Bredehoeft, J.D.

1981-01-01

A recent study of the hydrology of the Cretaceous Pierre Shale utilized three techniques for measuring the hydraulic conductivity of tight materials. Regional hydraulic conductivity was obtained from a hydrodynamic model analysis of the aquifer-aquitard system which includes the Pierre Shale. Laboratory values were obtained from consolidation tests on core samples. In-situ values of hydraulic conductivity were obtained by using a borehole slug test designed specifically for tight formations. The test is conducted by isolating a portion of the borehole with one or two packers, abruptly pressurizing the shut-in portion, and recording the pressure decay with time. The test utilizes the analytical solution for pressure decay as water flows into the surrounding formation. Consistent results were obtained using the test on three successively smaller portions of a borehole in the Pierre Shale. The in-situ tests and laboratory tests yielded comparable values; the regional hydraulic conductivity was two to three orders of magnitude larger. This suggests that the lower values represent intergranular hydraulic conductivity of the intact shale and the regional values represent secondary permeability due to fractures. Calculations based on fracture flow theory demonstrate that small fractures could account for the observed differences

Opinion - Thyroid (dysfunction in heart failure: is it a potential target for medical treatment?

Directory of Open Access Journals (Sweden)

Alessandro Pingitore

2005-07-01

Full Text Available Alessandro Pingitore, Giorgio IervasiInstitute of Clinical Physiology, CNR, Pisa, ItalyIntroductionCurrently, there is little doubt that activation of the neuroendocrine (NE system is predominately responsible for the progressive decline of heart function in heart failure (HF. This is due to the complex action of neurotransmitters, hormonal factors, and/or immunological pathways. Evidence that supports this point of view is the clear prognostic benefit and the reduction of HF progression by using NE-guided therapeutic approaches (SOLVD investigators 1992; Eichhorn and Bristow 1996; Packer et al 1996; Opie 2004; Solomon et al 2004. However, the fact that HF represents one of the major causes of morbidity and mortality in Western countries also suggests that the current portfolio of NE antagonists fails to completely explain and possibly counteract disease progression (Guyatt and Deveraux 2004. In this context, interest in the relationship between thyroid hormones (THs and HF is increasingly gaining prominence. The chief reason for the latter is the emerging novel actions of THs on the cardiovascular system and, more specifically, the role of TH as a prognostic biomarker of cardiac disease as well as the potential benefit of TH administration in patients with HF.

Discrete-feature modelling of the Aespoe Site: 1. Discrete-fracture network models for the repository scale

International Nuclear Information System (INIS)

Geier, J.E.; Thomas, A.L.

1996-08-01

This report describes the statistical derivation and partial validation of discrete-fracture network (DFN) models for the rock beneath the island of Aespoe in southeastern Sweden. The purpose was to develop DFN representations of the rock mass within a hypothetical, spent-fuel repository, located under Aespoe. Analyses are presented for four major lithologic types, with separate analyses of the rock within fracture zones, the rock excluding fracture zones, and all rock. Complete DFN models are proposed as descriptions of the rock mass in the near field. The procedure for validation, by comparison between actual and simulated packer tests, was found to be useful for discriminating among candidate DFN models. In particular, the validation approach was shown to be sensitive to a change in the fracture location (clustering) model, and to a change in the variance of single-fracture transmissivity. The proposed models are defined in terms of stochastic processes and statistical distributions, and thus are descriptive of the variability of the fracture system. This report includes discussion of the numerous sources of uncertainty in the models, including uncertainty that results from the variability of the natural system. 62 refs

Computed tomography to detect body packing: an unusual cause of small bowel obstruction

Energy Technology Data Exchange (ETDEWEB)

Brown, J.A. [St. Paul' s Hospital, Dept. of Radiology, Vancouver, British Columbia (Canada); Phang, T. [St. Paul' s Hospital, Dept. of Surgery, Vancouver, British Columbia (Canada); Enns, R. [St. Paul' s Hospital, Div. of Gastroenterology, Dept. of Internal Medicine, Vancouver, British Columbia (Canada); Butchart, M.K. [St. Paul' s Hospital, Dept. of Radiology, Vancouver, British Columbia (Canada); Filipenko, J.D. [St. Paul' s Hospital, Dept. of Pathology, Vancouver, British Columbia (Canada); Mason, A.C.; Cooperberg, P.I. [St. Paul' s Hospital, Dept. of Radiology, Vancouver, British Columbia (Canada)

2002-04-01

Concealment of illicit drugs within the alimentary tract is now an established method used by both smugglers and traffickers to evade detection by authorities. Those who ingest wrapped packets of drugs to transport them across international borders are known as 'body packers,' whereas those who ingest packages of drugs upon an unexpected encounter with law enforcement agents are known as 'body stuffers' or 'quick swallowers. Although most of these individuals require no medical care, acute drug toxicity (from inadvertent leaking of contents or rupture of the drug packet) and bowel obstruction are recognized hazards of drug packet ingestion. The detection of these packets is a challenge to custom officials and police interested in preventing the import and trafficking of illegal drugs, as well as to physicians who have to treat individuals who have ingested them. We report a case of a 38-year-old intravenous drug abuser who presented with an acute small bowel obstruction secondary to an impacted intraluminal heroin balloon in the mid jejunum. The value of computed tomography (CT) in the patient's diagnostic evaluation is highlighted. (author)

Aquifer characterization and groundwater modeling in support of remedial actions at the Weldon Spring Site

International Nuclear Information System (INIS)

Durham, L.A.; Carman, J.D.

1993-01-01

Aquifer characterization studies were performed to develop a hydrogeologic understanding of an unconfined shallow aquifer at the Weldon Spring site west of St. Louis, Missouri. The 88-ha site became contaminated because of uranium and thorium processing and disposal activities that took place from the 1940s through the 1960s. Slug and pumping tests provided valuable information on the lateral distribution of hydraulic conductivities, and packer tests and lithologic information were used to determine zones of contrasting hydrologic properties within the aquifer. A three-dimensional, finite- element groundwater flow model was developed and used to simulate the shallow groundwater flow system at the site. The results of this study show that groundwater flow through the system is predominantly controlled by a zone of fracturing and weathering in the upper portion of the limestone aquifer. The groundwater flow model, developed and calibrated from field investigations, improved the understanding of the hydrogeology and supported decisions regarding remedial actions at the site. The results of this study illustrate the value, in support of remedial actions, of combining field investigations with numerical modeling to develop an improved understanding of the hydrogeology at the site

Problems of developing the Timano-Pechora oil and gas province

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

Features of the geological structure of oil formations, and types of oil and gas formations of the territory of the Timano-Pechora oil and gas province are covered, as well as indicators of hydrochemical situation for existence of natural waters. A study is made of the effect of parameters of the drilling mode on twisting of wells using the ISM bits. A calculation is made of the system of cooling the drilling mud. A quantitative evaluation is made of the effect of buffer pressure on well output and of ways to improve coverage of the productive section of the Pashninskiy field. Reserves for improving well output of the PermCarbonaceous formation and methods of reducing viscosity of heavy oil of the Usinskiy field are described. Hydraulic resistances are presented in the valves of deep sucker rod pumps and the use of packer-cut-offs to cap the wells, questions of improving the effectiveness of clay-acid treatment, and also valve devices for developing the wells. Paths are defined for improving the effectiveness of drilling operations at the association ''Komineft''. Questions of environmental protection in the process of developing the oil and gas province are examined.

Museum of water, green and the sun - Marumori. New energy vision of the Marumori Town area; 2001 nendo Marumori machi shin energy vision hokokusho. Chiiki shin energy vision sakutei tou jigyo (Mizu to midori nto taiyo no hakubutsukan Marumori)

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-03-01

In Marumori Town, Miyagi Prefecture, a 'new energy vision of the area' was worked out which indicated the assessment of the energy reserved in the town and the course of new energy to be determined in the future. The energy consumption amount of Marumori Town in FY 1999 was estimated at 47,535 kL in crude oil conversion. By sector, the energy consumption amount was the largest in the order of the industrial sector, the transportation sector and the commercial/residential sector. The availability of new energy in Maruyama Town was estimated at approximately 480,585 GJ, of which the solar energy utilization was the largest, 53.1%. The photovoltaic power generation was the next largest, 25.4%, followed by the temperature difference energy (underground water), 8.9%, clean energy car, 7.8%, etc. As a plan for the first introduction of new energy, the following were studied: introduction of photovoltaic power generation facilities to the Marumori Town Office, introduction of new energy to public facilities around the Fudoson Park, introduction of wind power generation facilities to the town-run pasture, construction of the Marumori-type biogas plant, construction of a mini hydroelectric power plant, introduction of clean energy car to public vehicles, introduction of new energy facilities to the area of Kawa-no-Eki (station of the river), etc. (NEDO)

A heating experiment in the argillites in the Meuse/Haute-Marne underground research laboratory

International Nuclear Information System (INIS)

Wileveau, Yannick; Su, Kun; Ghoreychi, Mehdi

2007-01-01

A heating experiment named TER is being conducted with the objectives to identify the thermal properties, as well as to enhance the knowledge on THM processes in the Callovo-Oxfordian clay at the Meuse/Haute Marne Underground Research Laboratory (France). The in situ experiment has being switched on from early 2006. The heater, 3 m length, is designed to inject the power in the undisturbed zone at 6 m from the gallery wall. A heater packer is inflated in a metallic tubing. During the experiment, numerous sensors are emplaced in the surrounding rock and are experienced to monitor the evolution in temperature, pore-water pressure and deformation. The models and numerical codes applied should be validated by comparing the modeling results with the measurements. In parallel, some lab testing have been achieved in order to compare the results given with two different scales (cm up to meter scale). In this paper, we present a general description of the TER experiment with installation of the heater equipment and the surrounding instrumentation. Details of the in situ measurements of temperature, pore-pressure and strain evolutions are given for the several heating and cooling phases. The thermal conductivity and some predominant parameters in THM processes (as linear thermal expansion coefficient and permeability) will be discussed. (authors)

An Efficient and Packing-Resilient Two-Phase Android Cloned Application Detection Approach

Directory of Open Access Journals (Sweden)

Fang Lyu

2017-01-01

Full Text Available The huge benefit of mobile application industry has attracted a large number of developers and attendant attackers. Application repackaging provides help for the distribution of most Android malware. It is a serious threat to the entire Android ecosystem, as it not only compromises the security and privacy of the app users but also plunders app developers’ income. Although massive approaches have been proposed to address this issue, plagiarists try to fight back through packing their malicious code with the help of commercial packers. Previous works either do not consider the packing issue or rely on time-consuming computations, which are not scalable for large-scale real-world scenario. In this paper, we propose FUIDroid, a novel two-phase app clones detection system that can detect the packed cloned app. FUIDroid includes a function-based fast selection phase to quickly select suspicious apps by analyzing apps’ description and a further UI-based accurate detection phase to refine the detection result. We evaluate our system on two sets of apps. The result from experiment on 320 packed samples demonstrates that FUIDroid is resilient to packed apps. The evaluation on more than 150,000 real-world apps shows the efficiency of FUIDroid in large-scale scenario.

The Influence of Polyethylene Glycol Solution on the Dissolution Rate of Sustained Release Morphine.

Science.gov (United States)

Hodgman, Michael; Holland, Michael G; Englich, Ulrich; Wojcik, Susan M; Grant, William D; Leitner, Erich

2016-12-01

Whole bowel irrigation (WBI) is a management option for overdose of medications poorly adsorbed to activated charcoal, with modified release properties, or for body packers. Polyethylene glycol (PEG) is a mixture of ethylene oxide polymers of varying molecular weight. PEG with an average molecular weight of 3350 g/mol is used for WBI. PEG electrolyte lavage solution has been shown in vitro to hasten the dissolution of acetaminophen. The impact of PEG on the pharmacokinetics of extended release pharmaceuticals is unknown. Lower average molecular weight PEG mixtures are used as solvents and excipients. We sought to investigate the impact of PEG on the release of morphine from several extended release morphine formulations. An in vitro gastric model was developed. To test the validity of our model, we first investigated the previously described interaction of ethanol and Avinza®. Once demonstrated, we then investigated the effect of PEG with several extended release morphine formulations. In the validation portion of our study, we confirmed an ethanol Avinza® interaction. Subsequently, we did not observe accelerated release of morphine from Avinza® or generic extended release morphine in the presence of PEG. The use of PEG for gastric decontamination following ingestion of these extended release morphine formulations is unlikely to accelerate morphine release and aggravate intoxication.

Report on research and development achievements in fiscal 1980 in Sunshine Project. Development of a high-temperature bed drilling technology (Feasibility study on high-temperature bed drilling); 1980 nendo koon chiso kusaku gijutsu no kaihatsu seika hokokusho. Koon chiso kussaku ni kansuru feasibility study

Energy Technology Data Exchange (ETDEWEB)

NONE

1981-03-01

Discussions were given on feasibility of a technology to drill efficiently a high-temperature bed (350 degrees C and 400 kg/cm{sup 2}) to 3 to 5 km. This paper summarizes the bit items for development (bearings, cutters, blade tips, sealing materials, a tip retaining method and structures). The roller cutter bit had the retaining power of the mother cutter material strengthened by using improved carbonized steel and heat treatment. A bit bearing using heat resistant material showed a life of 40 hours or longer at 350 degrees C. The solid bit using a two-layered ultra hard blade tip achieved a drilling rate of 0.84 m/h without any breakage. Studies were also advanced on the air friction drilling method. This paper also dwelled on heat and corrosion resistant blade tips, materials, enhancement of heat resistance in powder sintered cutters, and studies on the bit sealing. In addition to discussions on the percussion drilling as a new drilling method, discussions were given on slanted drilling, air drilling and multi-leg drilling. The paper summarizes these discussions together with development problems to be solved in the future. Research and development works were carried out also on an explosion preventing device, a roll packer, and a rotating head prevent device. (NEDO)

Validation studies for assessing unsaturated flow and transport through fractured rock

International Nuclear Information System (INIS)

Bassett, R.L.; Neuman, S.P.; Rasmussen, T.C.; Guzman, A.; Davidson, G.R.; Lohrstorfer, C.F.

1994-08-01

*The objectives of this contract are to examine hypotheses and conceptual models concerning unsaturated flow and transport through heterogeneous fractured rock and to design and execute confirmatory field and laboratory experiments to test these hypotheses and conceptual models. Important new information is presented such as the application and evaluation of procedures for estimating hydraulic, pneumatic, and solute transport coefficients for a range of thermal regimes. A field heater experiment was designed that focused on identifying the suitability of existing monitoring equipment to obtain required data. A reliable method was developed for conducting and interpreting tests for air permeability using a straddle-packer arrangement. Detailed studies of fracture flow from Queen Creek into the Magina Copper Company ore haulage tunnel have been initiated. These studies will provide data on travel time for transport of water and solute in unsaturated tuff. The collection of rainfall runoff, and infiltration data at two small watersheds at the Apache Leap Tuff Site enabled us to evaluate the quantity and rate of water infiltrating into the subsurface via either fractures or matrix. Characterization methods for hydraulic parameters relevant to Weigh-level waste transport, including fracture apertures, transmissivity, matrix porosity, and fracture wetting front propagation velocities, were developed

Validation studies for assessing unsaturated flow and transport through fractured rock

Energy Technology Data Exchange (ETDEWEB)

Bassett, R.L.; Neuman, S.P.; Rasmussen, T.C.; Guzman, A.; Davidson, G.R.; Lohrstorfer, C.F. [Arizona Univ., Tucson, AZ (United States). Dept. of Hydrology and Water Resources

1994-08-01

*The objectives of this contract are to examine hypotheses and conceptual models concerning unsaturated flow and transport through heterogeneous fractured rock and to design and execute confirmatory field and laboratory experiments to test these hypotheses and conceptual models. Important new information is presented such as the application and evaluation of procedures for estimating hydraulic, pneumatic, and solute transport coefficients for a range of thermal regimes. A field heater experiment was designed that focused on identifying the suitability of existing monitoring equipment to obtain required data. A reliable method was developed for conducting and interpreting tests for air permeability using a straddle-packer arrangement. Detailed studies of fracture flow from Queen Creek into the Magina Copper Company ore haulage tunnel have been initiated. These studies will provide data on travel time for transport of water and solute in unsaturated tuff. The collection of rainfall runoff, and infiltration data at two small watersheds at the Apache Leap Tuff Site enabled us to evaluate the quantity and rate of water infiltrating into the subsurface via either fractures or matrix. Characterization methods for hydraulic parameters relevant to Weigh-level waste transport, including fracture apertures, transmissivity, matrix porosity, and fracture wetting front propagation velocities, were developed.

Methodology to characterize an unsampled oil interval, integrating PVT (Pressure/Volumen/Temperature) analysis and production log; Metodologia para caracterizacao de oleo de intervalo nao-amostrado, integrando analise PVT e perfil de producao

Energy Technology Data Exchange (ETDEWEB)

Marcon, Diogo Reato; Souza, Ana Paula Martins de; Vieira, Alexandre J.M. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2008-07-01

This work presents a new methodology for characterizing an unsampled oil interval, using basically production log data and PVT analyses available in the well. The methodology was applied to a real case, where the live oil samples were collected during a well test run in three different depths, revealing some evidence of a compositional grading due to gravity. Each individual sample was a mixture of the fluid produced from the reservoir bottom to the sampling point, since the whole interval was perforated and the isolation had to be made with a packer. The first sample was corresponding to the mixture of lower and all upper oils. The other two samples are only the heavier and that oil with part of the one from the upper interval. In order to identify the fluid properties from the upper interval, needed for production development studies, the following procedure was devised: equation-of-state tuning, reproducing the sampled fluid properties; conversion of volumetric flowrates from production log into mass and molar flowrates; flowrate ratio calculation, between the upper and lower intervals; upper interval fluid composition estimative; upper interval fluid properties simulation, using the previously tuned equation-of-state, thus generating what was considered a representative, synthetic PVT analysis. (author)

Preliminary Test Results of Heshe Hydrogeological Experimental Well Station in Taiwan

Science.gov (United States)

Chuang, P.; Liu, C.; Lin, M.; Chan, W.; Lee, T.; Chia, Y.; Teng, M.; Liu, C.

2013-12-01

Safe disposal of radioactive waste is a critical issue for the development of nuclear energy. The design of final disposal system is based on the concept of multiple barriers which integrate the natural barriers and engineering barriers for long-term isolation of radioactive wastes. As groundwater is the major medium that can transport radionuclides to our living environment, it is essential to characterize groundwater flow at the disposal site. Taiwan is located at the boundary between the Eurasian plate and the Philippine Sea plate. Geologic formations are often fractured due to tectonic compression and extension. In this study, a well station for the research and development of hydrogeological techniques was established at the Experimental Forest of the National Taiwan University in central Taiwan. There are 10 testing wells, ranging in depth from 25 m to 100 m, at the station. The bedrock beneath the regolith is highly fractured mudstone. As fracture is the preferential pathway of the groundwater flow, the focus of in-situ tests is to investigate the location of permeable fractures and the connection of permeable fractures. Several field tests have been conducted, including geophysical logging, heat-pulse flowmeter, hydraulic test, tracer test and double packer test, for the development of advanced technologies to detect the preferential groundwater flow in fractured rocks.

Geohydrology of volcanic tuff penetrated by test well UE-25b#1, Yucca Mountain, Nye County, Nevada

Science.gov (United States)

Lahoud, R.G.; Lobmeyer, D.H.; Whitfield, M.S.

1984-01-01

Test well UE-25bNo1, located on the east side of Yucca Mountain in the southwestern part of the Nevada Test Site, was drilled to a total depth of 1,220 meters and hydraulically tested as part of a program to evaluate the suitability of Yucca Mountain as a nuclear-waste repository. The well penetrated almost 46 meters of alluvium and 1,174 meters of Tertiary volcanic tuffs. The composite hydraulic head for aquifers penetrated by the well was 728.9 meters above sea level (471.4 meters below land surface) with a slight decrease in loss of hydraulic head with depth. Average hydraulic conductivities for stratigraphic units determined from pumping tests, borehole-flow surveys, and packer-injection tests ranged from less than 0.001 meter per day for the Tram Member of the Crater Flat Tuff to 1.1 meters per day for the Bullfrog Member of the Crater Flat Tuff. The small values represented matrix permeability of unfractured rock; the large values probably resulted from fracture permeability. Chemical analyses indicated that the water is a soft sodium bicarbonate type, slightly alkaline, with large concentrations of dissolved silica and sulfate. Uncorrected carbon-14 age dates of the water were 14,100 and 13,400 years. (USGS)

National Beef Tenderness Survey-2010: Warner-Bratzler shear force values and sensory panel ratings for beef steaks from United States retail and food service establishments.

Science.gov (United States)

Guelker, M R; Haneklaus, A N; Brooks, J C; Carr, C C; Delmore, R J; Griffin, D B; Hale, D S; Harris, K B; Mafi, G G; Johnson, D D; Lorenzen, C L; Maddock, R J; Martin, J N; Miller, R K; Raines, C R; VanOverbeke, D L; Vedral, L L; Wasser, B E; Savell, J W

2013-02-01

The tenderness and palatability of retail and food service beef steaks from across the United States (12 cities for retail, 5 cities for food service) were evaluated using Warner-Bratzler shear (WBS) and consumer sensory panels. Subprimal postfabrication storage or aging times at retail establishments averaged 20.5 d with a range of 1 to 358 d, whereas postfabrication times at the food service level revealed an average time of 28.1 d with a range of 9 to 67 d. Approximately 64% of retail steaks were labeled with a packer/processor or store brand. For retail, top blade had among the lowest (P 0.05) in WBS values between moist-heat and dry-heat cookery methods for the top round and bottom round steaks or between enhanced (contained salt or phosphate solution) or nonenhanced steaks. Food service top loin and rib eye steaks had the lowest (P food service top loin steaks received among the greatest (P food service rib eye steaks received the greatest ratings (P food service steaks were greater (P Choice, and Low Choice groups. The WBS values and sensory ratings were comparable to the last survey, signifying that no recent or substantive changes in tenderness have occurred.

Hydrogeological characterization and surveillance of the Asse site

International Nuclear Information System (INIS)

Stempel, C. Von; Brewitz, W.

1995-01-01

The Asse salt mine is located about 20 km southeast of Braunschweig in Northern Germany and the testing of radioactive waste disposal took place in the mine during 1967 to 1978. Observations of the hydrogeological conditions have been carried out for 25 years in the covering rock strata above the caprock and at the flanks of the Asse salt anticline. For geological and hydrogeological investigations 27 large diameter boreholes, 19 piezometers and 5 deep boreholes were sunk into the rock formations above the Asse salt anticline and 29 hydrological observation points (mostly measuring weirs) were constructed. Hydraulic conductivities between 10 -4 and 10 -9 m/s, mostly between 10 -5 and 10 -8 m/s were determined in the Triassic formations by pumping tests, the oscillation method and packer-tests. The groundwater recharge rate is between 10 and 20% of the yearly precipitation. Isotopic analyses showed that in the rocks above the Asse salt anticline there are three kinds of groundwater: near-surface precipitation; an intermediate-depth ground water corresponding to near-surface 2H/18O but without tritium from young precipitations; and deep groundwater below 740 m, without any tritium. In the vicinity of the Asse mine, the surface rocks above the Asse salt anticline, shows good conditions as a hydrogeological barrier

Effect of tillage system on yield and weed populations of soybean ( Glycin Max L.).

Science.gov (United States)

Hosseini, Seyed Z; Firouzi, Saeed; Aminpanah, Hashem; Sadeghnejhad, Hamid R

2016-03-01

Field experiment was conducted at Agricultural and Natural Resources Research Center of Golestan Province, Iran, to determine the effects of tillage system and weed management regime on yield and weed populations in soybean ( Glycin max L.). The experimental design was a split plot where the whole plot portion was a randomized complete block with three replicates. Main plots were tillage system: 1- No-till row crop seeding, 2- No-till seed drilling, 3- Tillage with disc harrow and drill planting, 4- Tillage with chisel packer and drill planting. The subplots were weed management regimes: 1-Weed control with herbicide application, 2- Hand weeding, 3- Herbicide application plus hand weeding, and 4- Non-weeding. Results indicated that the main effects of tillage system and weed management regime were significant for seed yield, pod number per plant, seed number per pod, weed density and biomass, while their interaction were significant only for weed density, weed biomass, and seed number per pod. The highest grain yields (3838 kg ha-1) were recorded for No-till row crop seeding. The highest seed yield (3877 kg ha-1) also was recorded for weed control with herbicide and hand weeding treatment, followed by hand weeding (3379 kg ha-1).

Steam injection to increase oil recovery

Energy Technology Data Exchange (ETDEWEB)

Leutwyler, K; Bigelow, H L

1966-03-01

Speculation is made as to the possibility that future reserves can be increased with steam energy from the first day of production. Boilers and auxilary equipment for this operation should be designed especially for free air operations. The appropriate treatment of the water used is critical in controlling certain problems. Since this operation has been planned for working at temperatures of approximately 315$C, one of the best downhole units for such an operation is found to be the Retrievable Thermal Seal Packer. Expansion joints solve the problem of temperature inhibiting movement causing permanent corkscrew deformity. Conventional sealing material on the tubing threads is not suitable at high temperatures. A band of Teflon does the job well but its use is unjustified by cost and personnel untrained in its use. However, an excellent sealing material has been developed that fills all requirements. General suggestions for the use of steam injection include the good cementing jobs; treatment of the entire system as an integral unit; use of asbestos to insulate is of doubtful value because of the subsequent problems it causes; starting of the steam injection conservatively allows the cement and tubing to heat together. It is believed that this procedure helps reduce the possibility of vertical fractures in the cement.

Strategies to improve performance od SW-SAGD (Single Well-Steam Assisted Gravity Drainage); Estrategias para melhor desempenho do SW-SAGD

Energy Technology Data Exchange (ETDEWEB)

Moreira, Richard Douglas Ribeiro [Norse Energy do Brasil S/A, Rio de Janeiro, RJ (Brazil); Trevisan, Osvair Vidal [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

2008-07-01

The present work presents an extensive numerical study, using a commercial reservoir simulator, on the recovery of heavy oil by steam injection assisted by gravity drainage in single horizontal wells. The goal is to study several strategies to improve performance of the Single Well - Steam Assisted Drainage Gravity (SW-SAGD), a new but promising thermal recovery technique aimed at exploitation of heavy oils. The strategies are basically made up of two measures: cyclic steam injection prior to the main injection-production process; and well bore splitting into injection and production zones by packer settings. The measures are scrutinized when used separately or together. Cyclic injection is varied according to cycle duration. Comparisons are made between the performance of oil recovery for the developed strategies and the performance of the traditional dual well SAGD technique with similar operating parameters and field conditions. The results point out the best strategy regarding key parameters such as the oil recovery factor and the steam oil ratio. Results were also verified for variations of rock and fluid properties in the range of a typical heavy oil reservoir. As a result, a new strategy for the SW-SAGD process is presented, providing oil recovery, which is higher than that yielded by the equivalent DW-SAGD. (author)

A new flooding scheme by horizontal well in thin heavy oil reservoirs

Energy Technology Data Exchange (ETDEWEB)

Liu, H.; Zhang, H.; Wang, M. [China Univ. of Petroleum, Beijing (China). MOE Key Laboratory of Petroleum Engineering ; Wang, Z. [Shengli Oil Field Co. (China). Dept. of Science and Technology]|[SINOPEC, Shengli (China)

2008-10-15

This paper presented a new flooding scheme for single horizontal wells that could improve recovery from thin marginal heavy oil reservoirs or from offshore reservoirs. The scheme involved the use of a multiple tubing string completion in a single wellbore. Special packers were installed within the long completion horizontal interval to establish an injection zone and a production zone. The new flooding scheme also involved simultaneous injection and production. Numerical simulation of the reservoir was used to determine the thickness of the formation and the lower limitation for different viscosities and the optimum time to start steam flooding after steam soaking by economic oil/steam ratio. The peak recovery efficiency of steam flooding was shown to occur when the length of separation section ratio is 0.15 to 0.2. It was concluded that high thermal efficiency in horizontal wells with long completion intervals can be maintained by alternating between steam soaking and steam flooding. Suitable alternation time to steam flooding is a seventh cycle for horizontal wells. Water cut and pressure difference will increase the steam injection rate, and thereby improve the oil production rate. The suitable injection rate for steam flooding is 2.4 t/d.ha.h because of its slow pressure change. 11 refs., 7 figs.

K Basin Sludge Conditioning Process Testing Project. Results from Test 4, ''Acid Digestion of Mixed-Bed Ion Exchange Resin''

International Nuclear Information System (INIS)

Pool, K.H.; Delegard, C.H.; Schmidt, A.J.; Thornton, B.M.; Silvers, K.L.

1998-06-01

Approximately 73 m 3 of heterogeneous solid material, ''sludge,'' (upper bound estimate, Packer 1997) have accumulated at the bottom of the K Basins in the 100 K Area of the Hanford Site. This sludge is a mixture of spent fuel element corrosion products, ion exchange materials (organic and inorganic), graphite-based gasket materials, iron and aluminum metal corrosion products, sand, and debris (Makenas et al. 1996, 1997). In addition, small amounts of polychlorinated biphenyls (PCBs) have been found. Ultimately, it is planned to transfer the K Basins sludge to the Hanford double shell tanks (DSTs). The Hanford Spent Nuclear Fuel (HSNF) project has conducted a number of evaluations to examine technology and processing alternatives to pretreat K Basin sludge to meet storage and disposal requirements. From these evaluations, chemical pretreatment has been selected to address criticality issues, reactivity, and the destruction or removal of PCBs before the K Basin sludge can be transferred to the DSTs. Chemical pretreatment, referred to as the K Basin sludge conditioning process, includes nitric acid dissolution of the sludge (with removal of acid insoluble solids), neutrons absorber addition, neutralization, and reprecipitation. Laboratory testing is being conducted by the Pacific Northwest National Laboratory (PNNL) to provide data necessary to develop the sludge conditioning process

Regulatory control of Chinese Proprietary Medicines in Singapore.

Science.gov (United States)

Yee, Shen-Kuan; Chu, Swee-Seng; Xu, Yi-Min; Choo, Peck-Lin

2005-02-01

In Singapore, there has been a growing public interest in traditional Chinese medicine (TCM), which plays an important role in the healthcare system. With effect from 1 September 1999, the control on Chinese Proprietary Medicines (CPM) was implemented in three phases over a span of 3 years. Under the CPM regulatory framework, CPM importers, wholesalers, manufacturers and re-packers must be licensed and CPM products assessed and listed by the health authority before they are allowed for sale. Product assessment is based on the criteria of safety and quality which include limits of toxic heavy metals and microbial contents. During the 3-year CPM listing exercise, irregularities were detected, including intrinsic toxicity, adulteration, substitution, contamination, misidentification, non-traditional and/or inappropriate usage, incorrect preparation, inappropriate labelling, exaggerated claims and/or advertising. The full implementation of CPM control by September 2001 saw the listing of 7943 CPM products and brought about an improvement in the quality and safety of CPM in Singapore as well as the removal of sub-standard, fake/imitation and adulterated products. The standards of practices by local CPM dealers have also been raised. These improvements have, in turn, increased the level of public confidence in CPM products in Singapore.

Influence of Conservation Tillage on some Soil Physical Properties and Crop Yield in Vetch-Wheat Rotation in Dryland Cold Region

Directory of Open Access Journals (Sweden)

I Eskandari

2017-10-01

pass of a disk harrow (CT; (2 reduced tillage:chisel packer (CH; (3 minimum tillage: Stubble mulch cultivator (MT; and (4 no-till (NT with retained previous crop residue. At beginning prior to the tillage operation, only wheat stubble was present on the soil surface. A uniform tillage treatment was applied to all plots using a chisel packer in October. A shallow tillage was also performed using a tandem disk harrow just prior to winter vetch planting. In the second, third, fourth and fifth years, the tillage treatments for the vetch and wheat planting were similar. A winter wheat cultivar (Azar 2 was sown 6 cm depth at a rate of 350 seeds per square meter with an Alvand conventional and Baldan NT 250 no-till drill. Vetch cultivar Golsefied was drilled 8 cm depth at a seeding rate of 85 kg ha−1 using Alvand drill. The following parameters were measured: heads of wheat per square meter, 1000-kernel weight, kernels per head, head length, plant height, and wheat grain yield. Grain yield was obtained with a plot combine harvester. The dry matter content was determined and yield corrected to a standard moisture content of 130 g kg−1. Rain use efficiency (RUE was calculated by dividing dry weight of grain yield by growing season precipitation. Soil water content and dry bulk density were measured gravimetrically (drying method, w/w in cropping seasons. Results and Discussion Conservation tillage treatments resulted in water saving in soil layers. In both stages of soil sampling, the most soil moisture variability to initial state was observed in plots which planted as no-tillage. The moisture variability of no-tillage system was 23.4% higher than that of conventional tillage system at 10-20 cm soil layer in flowering stage of wheat. Effect of treatments on soil bulk density in different soil depths illustrated that conservation tillage can reduce soil bulk density during four years. According to the results of this study the overall infiltration in no-tillage was 1

Predictive hydro-mechanical excavation simulation of a mine-by test at the Mont Terri rock laboratory

International Nuclear Information System (INIS)

Krug, St.; Shao, H.; Hesser, J.; Nowak, T.; Kunz, H.; Vietor, T.

2010-01-01

33 deg. to southeast. The sensors around the niche during excavating were installed with the focus on deformation and pore pressure evolution in the near field. Different types of pore water pressure sensors (in 5-interval multi-packers, single mini-packer systems and modular multi packer systems), inclinometer chains for the measurement of angular strains, magnetic extensometers for the observation of axial deformations around the niche and additionally one reverse head extensometer along the axis of Niche 2, which is shortened during the excavation process, delivered measurements in 2 hour intervals during and after the niche excavation. The FE code RockFlow allows considering the transverse isotropic behaviour of clay-stone by turning the model around the y-axis with the dip of the bedding planes. That means rock material anisotropy can be considered by the definition of transverse isotropic elastic properties. The hydraulic behaviour is defined by different permeabilities parallel and perpendicular to the bedding. The anisotropic stress state of the Opalinus Clay is defined additionally. The model concept involves the hydro-mechanical coupling in the balance equation for the conservation of mass (Biot coupling scheme) and also by constitutive equations describing the behaviour of clay rock. In the present HM model the effective stress approach, a linear swelling and shrinkage model and the strain dependent porosity and permeability after Kozeny Carman are involved. Fluid flux is modelled by applying the Richard's approximation for unsaturated flow. The 3D numerical model has an extension of 100 m in each direction. The model geometry consists of the Gallery 08, which is already modelled in the completely excavated state with its horse-shoe profile and Niche 2 with an almost circular section geometry, whose axis is situated in the centre between the model boundaries. The excavation simulation is done step by step corresponding to the excavation process of

Hydrocarbons in the Hauptsalz formation of the Gorleben salt dome. Content, distribution and origin

Energy Technology Data Exchange (ETDEWEB)

Pusch, Maximilian; Hammer, Joerg; Ostertag-Henning, Christian [Federal Institute for Geosciences and Natural Resources (BGR), Hannover (Germany)

2015-07-01

In the frame of the geological exploration of the Gorleben salt dome (November 2010 to November 2012) concentrations and compositions of hydrocarbons occuring in the main rock salt (Hauptsalz, Stassfurt series, z2) have been investigated. These exploration works followed former investigations of Gerling et al. (2002) and Bornemann et al. (2008). In order to get fresh, unaltered and representative samples beyond the EDZ (excavation damaged zone) for mineralogical and geochemical analyses, about 45 boreholes have been drilled at the 840 m level of the Gorleben exploration mine. These boreholes have been arranged in equal distances (depending on the mine structure) alongside crosscut 1 west (each 6 m long) and crosscut 1 east (each 9 m long). In addition 20 packer boreholes (10 packer boreholes per crosscut) for pressure build-up recording and hydrocarbon sampling have also been established. Immediately after drilling, core samples from the Hauptsalz for organic geochemical analyses have been retrieved and were dissolved in deionised and degased water. The results of analyses of about 210 samples scattered over all 45 boreholes reveal a total background concentration of hydrocarbons (C{sub 1} to C{sub 40}) of 0,24 mg/kg. 70 samples have concentrations between 1 mg/kg and 50 mg/kg (average 2,66 mg/kg) with 5 outliers up to 442 mg/kg in crosscut 1 west (Hammer et al. 2012, 2013). The drill cores have been investigated and documented by using ultraviolet light (l = 254 nm) in respect of visible indications of the existence of fluorescing aromatic hydrocarbons. Analyses revealed a high level of heterogeneous hydrocarbon distribution in the shape of isolated, irregular streaks, clusters, clouds and occasionally layers mainly located in recrystallized zones of the Hauptsalz. Thin sections and thick sections showed that hydrocarbons in z2HS1 (Knaeuelsalz) and z2HS2 (Streifensalz) samples are either located as black to brownish dendritical fluid inclusions alongside the grain

The study of suspicious cases to body smuggling in Loghman Hospital 1999-2000

Directory of Open Access Journals (Sweden)

Hoseinian Moghadam H

2001-11-01

Full Text Available One method of drug smuggling is body packing or body stuffing, placement of narcotics (opium, heroin, hashish, … inside intestinal tract for transfer from city to city or country to country. Estimating of the methods for transferring, content of packets, packaging, cause of death and results of diagnostic and therapeutic methods can effectively decrease the number of body packer and law execution. This study is case series by randomized sampling. Several parameters such as sex, age, marital status, addiction, job, level of education, type of opioids and their weight and number of packets, result of abdominal X-ray, surgery needs, were collected from April 1999 to December 2000. Through this period of time, 32 male smuggler who had swallowed drug packets were detained. The average age was 41 years (max=62, min=20. The minimum weight of the opium carried by this smugglers was below 20 gram and maximum weight was 1000 grams (median=360 grams. The minimum number of packets were one packet and maximum number of packets were 54 (median=10 packets. In 84 percent of body smugglers the content of packets was opium, 13 percent was heroin and 3 percent was hashish. From the cases, 81 percent of smugglers were addicts themselves. Death occurred in 7 cases from which 3 were after surgery.

Imaging of body packing: errors and medico-legal issues.

Science.gov (United States)

Reginelli, Alfonso; Russo, Anna; Urraro, Fabrizio; Maresca, Duilia; Martiniello, Ciro; D'Andrea, Alfredo; Brunese, Luca; Pinto, Antonio

2015-10-01

Body packing is the ingestion or insertion in the human body of packed illicit substances. Over the last 20 years, drug smuggling has increased global and new means of transport of narcotics have emerged. Among these, the most frequent one is the gastrointestinal tract: from mouth to anus, vagina, and ears. Cocaine is one of the most traded drugs, followed by heroin. Condoms, latex gloves, and balloons are typically used as drug packets for retention in the body. There are different radiologic modalities to detect illicit drugs in body packing: Plain radiography, computed tomography (CT), ultrasound, and magnetic resonance. Current protocols recommend the use of radiography to confirm packet retention and, in case of doubt, the use of abdominal CT scan with reduced mAs. In case of packet rupture, catastrophic effects can occur. Management of patients carrying packets of drugs is a recurrent medico-legal problem. To improve diagnostic accuracy and prevent hazardous complications, radiologists and emergency physicians should be familiar with radiologic features of body packing. The radiologist plays both a social and a medico-legal role in their assessment, and it should not be limited only to the identification of the packages but must also provide accurate information about their number and their exact location. In this review, we focus on diagnostic errors and medico-legal issues related to the radiological assessment of body packers.

Fallbeispiel Kluftgrundwasserleiter - Charakterisierung eines Grundwasserleiters im Rotliegendsandstein des Saar-Nahe-Beckens

Science.gov (United States)

Altenbockum, Michael; Berens, Katharina; Enzmann, Frieder; Kersten, Michael; Rüde, Thomas R.; Wieber, Georg H. E.

2018-06-01

The present case study brings together different field- and laboratory methods and shows how the combination of different methods is able to lead to a plausible geological and hydrogeological conceptual model. The motivation for the study is a large groundwater-contamination site with volatile chlorinated hydrocarbons (CHC). The field work included core drilling, borehole geophysics, field mapping, remote sensing as well as pumping and packer tests. In the laboratory, thin section analyses, computed tomography, mercury porosimetry, compressed permeability measurements and triaxial cell tests were carried out. The Kreuznach- and Standenbühl-Formations can be identified as two types of aquifers by their hydrochemical composition. The hypothesis of continuous porous sandstone-layers in the Kreuznach-Formation as published in former articles (Fürst et al. 1987) was not confirmed. The primary strike of the joint system was identified as N-S and E-W with joint spacings of 3 to 8 m. The laboratory tests show an effective porosity of at most 4% and a high retention capacity for the sandstone of the Kreuznach-Formation. About 9% of the joints are water conduits. The results show that because of heterogeneities in the fractured aquifer, the efficiency of hydraulic remediation of groundwater contamination by pumping wells is unpredictable. Furthermore, the high matrix retention capacity has a negative impact on the release of contaminants and on groundwater remediation.

Deep drilling KLX 02. Drilling and documentation of a 1700 m deep borehole at Laxemar, Sweden

Energy Technology Data Exchange (ETDEWEB)

Andersson, O [VBB VIAK AB, Malmoe (Sweden)

1994-08-01

In this report the preparation and execution of the deep core drilling KLX 02 is described. The hole was drilled with the wireline methods, NQ dimension (diameter 76 mm), to a final depth of 1700.5 m. Prior to core drilling a diameter 215 mm pilot hole was pre drilled to 200 m with controlled hammer drilling (DTH). In this hole casing and air-lift equipment was installed with the aim to support the circulation of drilling fluid. During core drilling there was a measurement of major drilling parameters and drilling fluid in and out of hole. As a fluid tracer uranine was used. Each 300 m of core drilling air-lift pump tests were performed. After completion a flow-meter log was run to finalize the project phase. It can be concluded that both the pre drilling and core drilling methods used proved to be successful. No severe technical problem occurred. However, potential risks have been pointed at in the report. The air-lift system functioned only partly and has to be modified for further use. Also the technique for monitoring of drilling parameters needs improvement as does the method for air-lift pump tests with packer. The organisation model for planning and realization functioned satisfactory and can be recommended for similar future projects. 9 refs, numerous tabs and figs.

The installation of a multiport ground-water sampling system in the 300 Area

International Nuclear Information System (INIS)

Gilmore, T.J.

1989-06-01

In 1988, the Pacific Northwest Laboratory installed a multiport groundwater sampling system in well 399-1-20, drilled north of the 300 Area on the Hanford Site in southwestern Washington State. The purpose of installing the multiport system is to evaluate methods of determining the vertical distribution of contaminants and hydraulic heads in ground water. Well 399-1-20 is adjacent to a cluster of four Resource Conservation and Recovery Act (RCRA) ground-water monitoring wells. This proximity makes it possible to compare sampling intervals and head measurements between the multiport system and the RCRA monitoring wells. Drilling and installation of the multiport system took 42 working days. Six sampling ports were installed in the upper unconfined aquifer at depths of approximately 120, 103, 86, 74, 56, and 44 feet. The locations of the sampling ports were determined by the hydrogeology of the area and the screened intervals of adjacent ground-water monitoring wells. The system was installed by backfilling sand around the sampling ports and isolating the ports with bentonite seals. The method proved adequate. For future installation, however, development and evaluation of an alternative method is recommended. In the alternative method suggested, the multiport system would be placed inside a cased and screened well, using packers to isolate the sampling zones. 4 refs., 8 figs., 1 tab

Geohydrologic data for test well USW G-4, Yucca Mountain area, Nye County, Nevada

Science.gov (United States)

Bentley, C.B.

1984-01-01

Data are presented on drilling operations, lithology, borehole geophysics, hydrologic monitoring, core analysis, water chemistry, pumping tests, and packer-injection tests for test well USW G-4. The well is one of a series of test wells drilled in and near the southwestern part of the Nevada Test Site, Nye County, Nevada, in cooperation with the U.S. Department of Energy. These test wells are part of the Nevada Nuclear Waste Storage Investigations to identify suitable sites for underground storage of high-level radioactive wastes. Test well USW G-4 was drilled to a total depth of 915 meters through volcanic rocks, consisting mostly of ash-flow tuff. Depth of water in the well during and after drilling and testing ranged from 538 to 544 meters below land surface, at approximate altitude of 728 meters above sea level. Drawdown in the well was about 3 meters after test pumping more than 5,000 minutes at a rate of 16 liters per second. A borehold-flow survey indicated that almost all water withdrawn from the well was contributed by the zone between a depth of about 865 and 915 meters below land surface. Analysis of a composite water sample collected after well completion showed the water to contain 216 milligrams per liter of dissolved solids, with relatively large concentrations of silica, sodium, and bicarbonate. (USGS)

Hydrogeologic investigations at the Nevada Test Site

International Nuclear Information System (INIS)

Hawkins, W.L.; Trudeau, D.A.; Drellack, S.L.

1992-01-01

The Nevada Test Site was established in 1950 as a continental area for testing nuclear devices and, since 1963, all nuclear detonations there have been underground. Most tests are conducted in vertical shafts with a small percentage conducted in tunnels. The majority of detonation points are above the water table, primarily in volcanic rocks or alluvium. In the testing areas the water table is 450--700 m below the surface. Pre- and post- event geologic investigations are conducted for each test location and long-term studies assess the impact of underground testing on a more regional scale. Studies in progress have not identified any impact on the regional ground water system from testing, but some local effects have been recognized. In some areas where several large tests have been conducted below the water table, water levels hundreds of meters above the regional water table have been measured and radioactivity has been discovered associated with fractures in a few holes. Flow-through and straddle packer testing has revealed unexpectedly high hydraulic pressures at depth. Recently, a multiple completion monitoring well installed to study three zones has confirmed the existence of a significant upward hydraulic gradient. These observations of local pressurization and fracture flow are being further explored to determine the influence of underground nuclear testing on the regional hydrogeologic system

Measurements of hydraulic conductivity in deep bedrock at Palmottu, Outokumpu, Pori and Ylivieska

International Nuclear Information System (INIS)

Ahonen, L.

1992-01-01

Hydraulic conductivity of the bedrock was studied using a double packer equipment fitting the small-diameter drillholes (46 mm). Test method was a slug test, in which the pressure of the test section is reduced by removing water from a tube connected to the test section and, subsequently, monitoring the recovery of the original pressure. In the work, methods of interpretation suitable for the test method are examined, and compared by means of graphical simulations. Their relevance in the case of measurements in fractured crystalline bedrock are discussed. In the method of Hvorslev, the recovery rate is assumed to be directly proportional to residual drawdown and to the hydraulic conductivity of the test section and, consequently, the effect of specific storage is neglected. In other methods of interpretations (e.g. 'Cooper'- method), assuming radial flow from porous aquifer, specific storage is taken into consideration. Different methods of interpretation lead to dissimilar theoretical responses on recovery vs. time graphics. Skin-effect and outer boundary effects also have an influence on the shape of recovery curve. There is no major differences in K-values obtained by different methods of interpretation. The study sites represent different lithological environments, comprising migmatitic gneisses with granitic interlayers (Palmottu); a complex association of serpentine, black schist, quartzite, dolomite and scram (Outokumpu); arkosic sandstone (Pori); and mafic/ultramafic intrusion (Ylivieska)

One simple DNA extraction device and its combination with modified visual loop-mediated isothermal amplification for rapid on-field detection of genetically modified organisms.

Science.gov (United States)

Zhang, Miao; Liu, Yinan; Chen, Lili; Quan, Sheng; Jiang, Shimeng; Zhang, Dabing; Yang, Litao

2013-01-02

Quickness, simplicity, and effectiveness are the three major criteria for establishing a good molecular diagnosis method in many fields. Herein we report a novel detection system for genetically modified organisms (GMOs), which can be utilized to perform both on-field quick screening and routine laboratory diagnosis. In this system, a newly designed inexpensive DNA extraction device was used in combination with a modified visual loop-mediated isothermal amplification (vLAMP) assay. The main parts of the DNA extraction device included a silica gel membrane filtration column and a modified syringe. The DNA extraction device could be easily operated without using other laboratory instruments, making it applicable to an on-field GMO test. High-quality genomic DNA (gDNA) suitable for polymerase chain reaction (PCR) and isothermal amplification could be quickly isolated from plant tissues using this device within 15 min. In the modified vLAMP assay, a microcrystalline wax encapsulated detection bead containing SYBR green fluorescent dye was introduced to avoid dye inhibition and cross-contaminations from post-LAMP operation. The system was successfully applied and validated in screening and identification of GM rice, soybean, and maize samples collected from both field testing and the Grain Inspection, Packers, and Stockyards Administration (GIPSA) proficiency test program, which demonstrated that it was well-adapted to both on-field testing and/or routine laboratory analysis of GMOs.

Completion difficulties of HTHP and high-flowrate sour gas wells in the Longwangmiao Fm gas reservoir, Sichuan Basin, and corresponding countermeasures

Directory of Open Access Journals (Sweden)

Yufei Li

2016-05-01

Full Text Available For safe and efficient development of the sour gas reservoirs of the Cambrian Longwangmiao Fm in the Anyue Gas Field, the Sichuan Basin, and reduction of safety barrier failures and annulus abnormal pressure which are caused by erosion, corrosion, thread leakage and improper well completion operations, a series of studies and field tests were mainly carried out, including optimization of well completion modes, experimental evaluation and optimization of string materials, sealing performance evaluation of string threads, structural optimization design of downhole pipe strings and erosion resistance evaluation of pipe strings, after the technical difficulties related with the well completion in this reservoir were analyzed. And consequently, a set of complete well completion technologies suitable for HTHP (high temperature and high pressure and high-flowrate gas wells with acidic media was developed as follows. First, optimize well completion modes, pipe string materials and thread types. Second, prepare optimized string structures for different production allocation conditions. And third, formulate well completion process and quality control measures for vertical and inclined wells. Field application results show that the erosion of high-flowrate production on pipe strings and downhole tools and the effect of perforation on the sealing performance of production packers were reduced effectively, well completion quality was improved, and annulus abnormal pressure during the late production was reduced. This research provides a reference for the development of similar gasfields.

The water run of the Lavia test borehole - an interpritation of the test data

International Nuclear Information System (INIS)

Ylinen, Arto

1986-04-01

In 1984 a 1001 metres deep testhole was drilled in Lavia, Western Finland, for developing and testing equipments and methods to investigate the properties of rock for its suitability as a site for a nuclear waste repository. During the same year, constant head injection tests were performed in the hole. The method was two-packer test with 30 metres long test interval. Totally 30, mainly 2 hours' 2000kPa, tests were made in the subsequent depths. The data, pressure, flow rate and temperature, during the injection and fall-off phases, were stored in the numerical form in micro-computer diskettes. The aim of this study is to make an interpretation of the test data for getting knowledge about the rock ability of conducting water. The traditional homogeneous Horner and reciprocal flow interpretations are made and the water conducting parametres are estimated. Also a new method of taking into account the differences in fracture types (fillings, roughness, shape, etc.) and the causing different transmissivity, is derived and used for the fracture interpretation. As a result, a dense spectrum for flow parametres is obtained from the same data. Finally, the relevance of different parametres and their suitability for testing and modelling the flow in the rock is evaluated, and new schemes for further investigation are proposed. (author)

Crosshole Investigations

International Nuclear Information System (INIS)

Noy, D.; Barker, J.; Black, J.H.; Holmes, D.C.

1988-02-01

The crosshole sinusoidal testing was carried out using computer-controlled test equipment to generate the sinusoidally varying head in a single zone (the 'source') isolated by packers. A second ('receiver') borehole contained a number of straddle intervals and was used to observe the propagation of the sinusoidal signal. The number of positive responses was limited and flow appeared to be concentrated within a few 'channels'. Analysis was attempted using single fissure, regularly fissured and porous medium models. None gave satisfactory fits to the measured data. A new analysis involving the 'dimension' of the flow test has been developed to analyse the results of the crosshole sinusoidal testing. This analysis allows the dimension of the flow to assume non-integer values whereas conventionally the dimension is taken as either one, two, or three: for example, radial flow in a uniform planar fissure would be two dimensional. The new model is found to give a more consistent description of the test data than the conventional models and suggests a complex pattern of fracture properties within each fracture zone. However, the results presented must be considered as being preliminary since we still have much to learn about how to best apply this model and present the results. Also, it is not yet clear how the derived value of 'dimension' can be related to the transport properties of the rock. (authors)

Deep drilling KLX 02. Drilling and documentation of a 1700 m deep borehole at Laxemar, Sweden

International Nuclear Information System (INIS)

Andersson, O.

1994-08-01

In this report the preparation and execution of the deep core drilling KLX 02 is described. The hole was drilled with the wireline methods, NQ dimension (diameter 76 mm), to a final depth of 1700.5 m. Prior to core drilling a diameter 215 mm pilot hole was pre drilled to 200 m with controlled hammer drilling (DTH). In this hole casing and air-lift equipment was installed with the aim to support the circulation of drilling fluid. During core drilling there was a measurement of major drilling parameters and drilling fluid in and out of hole. As a fluid tracer uranine was used. Each 300 m of core drilling air-lift pump tests were performed. After completion a flow-meter log was run to finalize the project phase. It can be concluded that both the pre drilling and core drilling methods used proved to be successful. No severe technical problem occurred. However, potential risks have been pointed at in the report. The air-lift system functioned only partly and has to be modified for further use. Also the technique for monitoring of drilling parameters needs improvement as does the method for air-lift pump tests with packer. The organisation model for planning and realization functioned satisfactory and can be recommended for similar future projects. 9 refs, numerous tabs and figs

Fallbeispiel Kluftgrundwasserleiter - Charakterisierung eines Grundwasserleiters im Rotliegendsandstein des Saar-Nahe-Beckens

Science.gov (United States)

Altenbockum, Michael; Berens, Katharina; Enzmann, Frieder; Kersten, Michael; Rüde, Thomas R.; Wieber, Georg H. E.

2017-12-01

The present case study brings together different field- and laboratory methods and shows how the combination of different methods is able to lead to a plausible geological and hydrogeological conceptual model. The motivation for the study is a large groundwater-contamination site with volatile chlorinated hydrocarbons (CHC). The field work included core drilling, borehole geophysics, field mapping, remote sensing as well as pumping and packer tests. In the laboratory, thin section analyses, computed tomography, mercury porosimetry, compressed permeability measurements and triaxial cell tests were carried out. The Kreuznach- and Standenbühl-Formations can be identified as two types of aquifers by their hydrochemical composition. The hypothesis of continuous porous sandstone-layers in the Kreuznach-Formation as published in former articles (Fürst et al. 1987) was not confirmed. The primary strike of the joint system was identified as N-S and E-W with joint spacings of 3 to 8 m. The laboratory tests show an effective porosity of at most 4% and a high retention capacity for the sandstone of the Kreuznach-Formation. About 9% of the joints are water conduits. The results show that because of heterogeneities in the fractured aquifer, the efficiency of hydraulic remediation of groundwater contamination by pumping wells is unpredictable. Furthermore, the high matrix retention capacity has a negative impact on the release of contaminants and on groundwater remediation.

Groundwater geochemical studies at the Altnabreac research site

International Nuclear Information System (INIS)

Kay, R.L.F.; Bath, A.H.

1982-12-01

Results of chemical and isotopic analyses of Altnabreac groundwaters are presented. They are used to define the origin and maturation scheme of groundwaters to depths approaching 300 m in crystalline rocks (granites and metasediments). Samples are derived from packer-isolated zones in 3 deep (approx. 300 m) boreholes, temporal monitoring of 17 shallow boreholes (less than 41 m deep) and about 60 springs and other surface waters as well as from 1981-82 aggregated monthly rainfall. Stable oxygen and hydrogen isotope ratios show all waters to be wholly meteoric in origin and the precipitation input to be well mixed. 3 H (tritium) contents suggest that recharge occurs on discrete upland areas where there tends to be downward movement with essentially horizontal flow, resulting in slight discharge, under the remaining ground. Samples abstracted from boreholes frequently contain significant levels of 3 H indicating a component of post-1953 recharge. This results from hydraulic connection to the borehole water column in deep boreholes or directly to the surface storage in the case of shallow boreholes. On the basis of 14 C and 4 He contents, details of which are being reported separately, the oldest analysed water (from 259 to 281 m in borehole A1B) has an age of about 10 4 years. The results are discussed. (author)

Improved Characterization of Groundwater Flow in Heterogeneous Aquifers Using Granular Polyacrylamide (PAM) Gel as Temporary Grout

Science.gov (United States)

Klepikova, Maria V.; Roques, Clement; Loew, Simon; Selker, John

2018-02-01

The range of options for investigation of hydraulic behavior of aquifers from boreholes has been limited to rigid, cumbersome packers, and inflatable sleeves. Here we show how a new temporary borehole sealing technique using soft grains of polyacrylamide (PAM) gel as a sealing material can be used to investigate natural groundwater flow dynamics and discuss other possible applications of the technology. If no compressive stress is applied, the gel packing, with a permeability similar to open gravel, suppresses free convection, allowing for local temperature measurements and chemical sampling through free-flowing gel packing. Active heating laboratory and field experiments combined with temperature measurements along fiber optic cables were conducted in water-filled boreholes and boreholes filled with soft grains of polyacrylamide gel. The gel packing is shown to minimize the effect of free convection within the well column and enable detection of thin zones of relatively high or low velocity in a highly transmissive alluvial aquifer, thus providing a significant improvement compared to temperature measurements in open boreholes. Laboratory experiments demonstrate that under modest compressive stress to the gel media the permeability transitions from highly permeable to nearly impermeable grouting. Under this configuration the gel packing could potentially allow for monitoring local response pressure from the formation with all other locations in the borehole hydraulically isolated.

Convective heat flow probe

Science.gov (United States)

Dunn, James C.; Hardee, Harry C.; Striker, Richard P.

1985-01-01

A convective heat flow probe device is provided which measures heat flow and fluid flow magnitude in the formation surrounding a borehole. The probe comprises an elongate housing adapted to be lowered down into the borehole; a plurality of heaters extending along the probe for heating the formation surrounding the borehole; a plurality of temperature sensors arranged around the periphery of the probe for measuring the temperature of the surrounding formation after heating thereof by the heater elements. The temperature sensors and heater elements are mounted in a plurality of separate heater pads which are supported by the housing and which are adapted to be radially expanded into firm engagement with the walls of the borehole. The heat supplied by the heater elements and the temperatures measured by the temperature sensors are monitored and used in providing the desired measurements. The outer peripheral surfaces of the heater pads are configured as segments of a cylinder and form a full cylinder when taken together. A plurality of temperature sensors are located on each pad so as to extend along the length and across the width thereof, with a heating element being located in each pad beneath the temperature sensors. An expansion mechanism driven by a clamping motor provides expansion and retraction of the heater pads and expandable packer-type seals are provided along the probe above and below the heater pads.

Teleseismic SKS splitting beneath East Antarctica using broad-band stations around Soya Coast

Science.gov (United States)

Usui, Y.; Kanao, M.

2006-12-01

We observed shear wave splitting of SKS waves from digital seismographs that are recorded at 5 stations around Soya Coast in the Lutzow-Holm Bay, East Antarctica. Their recording systems are composed of a three-component broadband seismometer (CMG-40T), a digital recording unit and a solar power battery supply. The events used were selected from 1999 to 2004 and phase arrival times were calculated using the IASPEI91 earth model (Kennet, 1995). In general, we chose the data from earthquakes with m>6.0 and a distance range 85° < Δ < 130° for the most prominent SKS waves We used the methods of Silver and Chan (1991) for the inversion of anisotropy parameters and estimated the splitting parameters φ (fast polarization direction) and δt (delay time between split waves) assuming a single layer of hexagonal symmetry with a horizontal symmetry axis. The weighted averages of all splitting parameters (φ, δt) for each station are AKR (30±4, 1.30±0.2), LNG (58±6, 1.27±0.2), SKL (67±10, 0.94±0.2), SKV (40±6, 1.28±0.3) and TOT (52±8, 1.26±0.3), where the weights are inversely proportional to the standard deviations for each solution. As compared to typical delay times of SKS waves which show 1.2s (Silver and Chan 1991; Vinnik et al., 1992), the result shows generally the same value. In previous study, Kubo and Hiramatsu (1998) estimate the splitting parameter for Syowa station (SYO), where is located near our using stations in East Antarctica, and the results are (49±3, 0.70±0.1). Although it is consistent with our results for fast polarization direction, δt for our results are large relatively to those of SYO. The difference may be due to either different incident angle or more complex anisotropic structure. We found that fast polarization direction is systematically parallel to coast line in the Lutzow-Holm Bay, East Antarctica, which is consistent with NE-SW paleo compressional stress. The absolute plate motion based on the HS2-NUVEL1 (Gripp and Gordon

Geohydrologic data for test well USW H-5, Yucca Mountain area, Nye County, Nevada

International Nuclear Information System (INIS)

Bentley, C.B.; Robison, J.H.; Spengler, R.W.

1983-01-01

This report presents data on drilling operations, lithology, borehold geophysics, water-level monitoring, core analysis, ground-water chemistry, pumping tests, and packer-injection tests for test well USW H-5. The well is one of a series of test wells drilled in and near the southwestern part of the Nevada Test Site, Nye County, Nevada, in cooperation with the US Department of Energy. These test wells are part of the Nevada Nuclear Waste Storage Investigations to identify suitable sites for storage of high-level radioactive wastes. Test well USW H-5 was drilled to a total depth of 1219 meters through volcanic rocks consisting mostly of ash-flow tuff. Depth to water in the well ranged between 703.8 and 707.2 meters below land surface, at an approximate altitude of 704 meters above sea level. Drawdown in the well exceeded 6 meters after test pumping more than 3000 minutes at a rate of 10 liters per second. Borehole-flow surveys showed that about 90 percent of the water in the well is contributed by the zone between 707 and about 820 meters below land surface. Two composite water samples collected after well completion contained 206 and 220 milligrams per liter of dissolved solids. Sodium and bicarbonate were the predominant dissolved anion and cation. The concentration of dissolved silica was 48 milligrams per liter in both samples, which is a relatively large concentration for most natural waters. 6 references, 19 figures, 6 tables

“To Sing with the Spirit:” Psalms, Hymns and the Spirituality of Late Eighteen Century American Presbyterians

Directory of Open Access Journals (Sweden)

William Harrison Taylor

2013-12-01

Full Text Available This paper contends that the contemporary discussion among theologians regarding the relationship between theology and spirituality can offer new insight into the eighteenth century religious world. This theological discussion has wrestled with, among other things, the questions of whether theology and spirituality are mutually exclusive and what exactly their relationship looks like. Resoundingly, theologians such as Alister McGrath, J. I. Packer, and Sandra Schneiders have concluded that any separation of the two represents a false dichotomy within Christianity. Accordingly, Christians are called to “the quest for a fulfilled and authentic Christian existence, involving the bringing together of the fundamental ideas of Christianity and the whole experience of living on the basis of, and within, the scope of the Christian faith.” Sound theology, then, necessitates living by the Spirit and vice versa. The benefit of this theological position for religious history lies in its reevaluation of the common categorization of Christians as either theologically or spiritually focused. By heeding the call of contemporary theologians and blurring these lines of distinction, historians can afford eighteen century American Christians the chance to better define themselves. Considered in this light, the actions of the Presbyterians, for instance, are freed from the manipulative “social control” framework as one of the “establishmentarian” churches. Instead, the Presbyterians reveal characteristics generally reserved for the democratically charged “sectarians,” such as a robust spiritual life compelled by music.

Geohydrologic data for test well USW H-5, Yucca Mountain area, Nye County, Nevada

Science.gov (United States)

Bentley, C.B.; Robison, J.H.; Spengler, R.W.

1983-01-01

This report presents data on drilling operations, lithology, borehole geophysics, water-level monitoring, core analysis, ground-water chemistry, pumping tests, and packer-injection tests for test well USW H-5. The well is one of a series of test wells drilled in and near the southwestern part of the Nevada Test Site, Nye County, Nevada, in cooperation with the U.S. Department of Energy. These test wells are part of the Nevada Nuclear Waste Storage Investigations to identify suitable sites for storage of high-level radioactive wastes. Test well USW H-5 was drilled to a total depth of 1,219 meters through volcanic rocks consisting mostly of ash-flow tuff. Depth to water in the well ranged between 703.8 and 707.2 meters below land surface, at an approximate altitude of 704 meters above sea level. Drawdown in the well exceeded 6 meters after test pumping more than 3,000 minutes at a rate of 10 liters per second. Borehole-flow surveys showed that about 90 percent of the water in the well is contributed by the zone between 707 and about 820 meters below land surface. Two composite water samples collected after well completion contained 206 and 220 milligrams per liter of dissolved solids. Sodium and bicarbonate were the predominant dissolved anion and cation. The concentration of dissolved silica was 48 milligrams per liter in both samples, which is a relatively large concentration for most natural waters.

Long-range spatial dependence in fractured rock. Empirical evidence and implications for tracer transport

International Nuclear Information System (INIS)

Painter, S.

1999-02-01

Nonclassical stochastic continuum models incorporating long-range spatial dependence are evaluated as models for fractured crystalline rock. Open fractures and fracture zones are not modeled explicitly in this approach. The fracture zones and intact rock are modeled as a single stochastic continuum. The large contrasts between the fracture zones and unfractured rock are accounted for by making use of random field models specifically designed for highly variable systems. Hydraulic conductivity data derived from packer tests in the vicinity of the Aespoe Hard Rock Laboratory form the basis for the evaluation. The Aespoe log K data were found to be consistent with a fractal scaling model based on bounded fractional Levy motion (bfLm), a model that has been used previously to model highly variable sedimentary formations. However, the data are not sufficient to choose between this model, a fractional Brownian motion model for the normal-score transform of log K, and a conventional geostatistical model. Stochastic simulations conditioned by the Aespoe data coupled with flow and tracer transport calculations demonstrate that the models with long-range dependence predict earlier arrival times for contaminants. This demonstrates the need to evaluate this class of models when assessing the performance of proposed waste repositories. The relationship between intermediate-scale and large-scale transport properties in media with long-range dependence is also addressed. A new Monte Carlo method for stochastic upscaling of intermediate-scale field data is proposed

Reservoir compartmentalization and management strategies: Lessons learned in the Illinois basin

Energy Technology Data Exchange (ETDEWEB)

Grube, J.P.; Crockett, J.E.; Huff, B.G. [and others

1997-08-01

A research project jointly sponsored by the US Department of Energy and the Illinois State Geological Survey focused on the Cypress and Aux Vases Formations (Mississippian), major clastic reservoirs in the Illinois Basin. Results from the research showed that understanding the nature and distribution of reservoir compartments, and using effective reservoir management strategies, can significantly improve recovery efficiencies from oil fields in this mature basin. Compartments can be most effectively drained where they are geologically well defined and reservoir management practices are coordinated through unified, compartment-wide, development programs. Our studies showed that the Cypress and Aux Vases reservoirs contain lateral and vertical permeability barriers forming compartments that range in size from isolated, interlaminated sandstone and shale beds to sandstone bodies tens of feet in thickness and more than a mile in length. Stacked or shingled, genetically similar sandstone bodies are commonly separated by thin impermeable intervals that can be difficult to distinguish on logs and can, therefore, cause correlation problems, even between wells drilled on spacing of less than ten acres. Lateral separation of sandstone bodies causes similar problems. Reservoir compartmentalization reduces primary and particularly secondary recovery by trapping pockets of by-passed or banked oil. Compartments can be detected by comparing recovery factors of genetically similar sandstone bodies within a field; using packers to separate commingled intervals and analyzing fluid recoveries and pressures; making detailed core-to-log calibrations that identify compartment boundaries; and analyzing pressure data from waterflood programs.

Influence of body condition score on live and carcass value of cull beef cows.

Science.gov (United States)

Apple, J K

1999-10-01

Mature beef cows (n = 88) were slaughtered to determine the influence of body condition score (BCS) on carcass and live animal value. Cows were weighed and assigned a BCS (9-point scale), 24 h before slaughter. Hide and by-products weights were recorded during harvest. After a 48-h chill period, the right side of each carcass was fabricated into boneless subprimal cuts, minor cuts, lean trim, fat, and bone. Weights were recorded at all stages of fabrication. Carcass values (U.S.$/100 kg of hot carcass weight) were calculated for U.S. Utility and U.S. Cutter grades, as well as for the Utility/Cutter mix for each BCS. Gross value included the carcass value and the value of the hide and byproducts, whereas net value was calculated after harvest and fabrication costs and by-product value were considered. Live value (U.S.$/100 kg of live weight) was computed by dividing the net value by the animal's live weight 24 h before harvest. The value of the hide and by-products for BCS-2 cows was greater (Pmix, cows designated with a BCS of 7 and 8 had greater (P.05) to BCS-7 cows. Information from this study can be used by the non-fed beef industry to establish a value-based marketing system. Data from this study would indicate that marketing cull beef cows at a BCS of 6 could optimize economic returns to both cow-calf producers and non-fed beef packers.

Low-dose computed tomography to detect body-packing in an animal model

Energy Technology Data Exchange (ETDEWEB)

Maurer, M.H., E-mail: martin.maurer@charite.de [Klinik fuer Strahlenheilkunde, Charite - Universitaetsmedizin, Berlin (Germany); Niehues, S.M.; Schnapauff, D.; Grieser, C.; Rothe, J.H. [Klinik fuer Strahlenheilkunde, Charite - Universitaetsmedizin, Berlin (Germany); Waldmueller, D. [Bildungs- und Wissenschaftszentrum der Bundesfinanzverwaltung, Berlin (Germany); Chopra, S.S. [Klinik fuer Allgemein-, Viszeral- und Transplantationschirurgie, Charite - Universitaetsmedizin, Berlin (Germany); Hamm, B.; Denecke, T. [Klinik fuer Strahlenheilkunde, Charite - Universitaetsmedizin, Berlin (Germany)

2011-05-15

Objective: To assess the possible extent of dose reduction for low-dose computed tomography (CT) in the detection of body-packing (ingested drug packets) as an alternative to plain radiographs in an animal model. Materials and methods: Twelve packets containing cocaine (purity >80%) were introduced into the intestine of an experimental animal (crossbred pig), which was then repeatedly examined by abdominal CT with stepwise dose reduction (tube voltage, 80 kV; tube current, 10-350 mA). Three blinded readers independently evaluated the CT datasets starting with the lowest tube current and noted the numbers of packets detected at the different tube currents used. In addition, 1 experienced reader determined the number of packets detectable on plain abdominal radiographs and ultrasound. Results: The threshold for correct identification of all 12 drug packets was 100 mA for reader 1 and 125 mA for readers 2 and 3. Above these thresholds all 3 readers consistently identified all 12 packets. The effective dose of a low-dose CT scan with 125 mA (including scout view) was 1.0 mSv, which was below that of 2 conventional abdominal radiographs (1.2 mSv). The reader interpreting the conventional radiographs identified a total of 9 drug packets and detected 8 packets by abdominal ultrasound. Conclusions: Extensive dose reduction makes low-dose CT a valuable alternative imaging modality for the examination of suspected body-packers and might replace conventional abdominal radiographs as the first-line imaging modality.

Verification and characterization of continuum behavior of fractured rock at AECL Underground Research Laboratory

International Nuclear Information System (INIS)

Long, J.C.S.

1985-02-01

The purposes of this study are to determine when a fracture system behaves as a porous medium and what the corresponding permeability tensor is. A two-dimensional fracture system model is developed with density, size, orientation, and location of fractures in an impermeable matrix as random variables. Simulated flow tests through the models measure directional permeability, K/sub g/. Polar coordinate plots of 1/√K/sub g/, which are ellipses for equivalent anistropic homogeneous porous media, are graphed and best fit ellipses are calculated. Fracture length and areal density were varied such that fracture frequency was held constant. The examples showed the permeability increased with fracture length. The modeling techniques were applied to data from the Atomic Energy of Canada Ltd.'s Underground Research Laboratory facility in Manitoba, Canada by assuming the fracture pattern at the surface persists at depth. Well test data were used to estimate the aperture distribution by both correlating and not correlating the aperture with fracture length. The permeability of models with uncorrelated length and aperture were smaller than those for correlated models. A Monte Carlo type study showed that analysis of steady state packer tests consistently underestimate the mean aperture. Finally, a three-dimensional model in which fractures are discs randomly located in space, interactions between the fractures are line segments, and the solution of the steady state flow equations is based on image theory was discussed

Labelling of food: A challenge for many

Directory of Open Access Journals (Sweden)

Henderikx Frans

2017-01-01

Full Text Available Background: In food marketing, there is a trend towards artisanal, traditional “honest” food, and simultaneously to good looking, long lasting, multi-purpose food with a clean label. In addition, marketeers like to upgrade the image of the food, including the label, using various digital techniques. This can produce (unintended non-conformities with the current food law on labelling, which in this review, refers to Regulation (EU No 1169/2011 (European Union, 2011. Food and meat labelling have been subjected to increased regulation in the recent years, sometimes after scandals (horse-gate, food fraud, sometimes due to wishes of consumer organisations (nutritional information and sometimes after the introduction of new types of ingredients (sweeteners, phytosterols, nanomaterials. Scope and approach: This review provides information about food labelling. Some experiences gathered by food inspectorate personnel in practice, with reference to the literature data, positive aspects, main problems and trends are discussed. Key findings and conclusion: Food labelling is a complex requirement, with the general demands written down in the harmonized regulation (European Union, 2011. Foods sold by e-commerce must also follow these same regulations. However, many food labels on the market show smaller and/or bigger deviations from the legal requirements, which should be appropriately addressed by the food manufacturers or packers, but also by the competent authorities. Even training of consumers seems to be needed, since all this information is, in the end, intended for consumers to aptly utilise.

A joint Russian-American field test at the Chelyabinsk-65 (Mayak) Site: Test description and preliminary results

International Nuclear Information System (INIS)

Wollenberg, H.; Tsang, C.F.; Frangos, W.

1995-05-01

In September 1994, a Russian-American team conducted hydrogeological, geochemical, geophysical, and radiometric measurements in the territory of the Mayak Production Association. The primary purpose of these operations was to examine the groundwater plume moving from Lake Karachai toward the river. Activities encompassed isolation of hydrologic intervals in two wells and production of water from these intervals, to compare isolated versus open-well sampling methods; surface and soil-water sampling, accompanying radiometric measurements and subsequent chemical analyses; and electrical resistivity profiling in areas of expected contrasting resistivity. Preliminary results indicate that (1) 60 Co and 137 Cs are present in small concentrations in water of the Mishelyak River, (2) analyses of water samples collected by a downhole sampler and of water produced from packed-off intervals agree within limits of laboratory accuracy, attesting to the efficacy of the sampling methods presently used by the Russian workers; and (3) strong contrasts occur between the electrical resistivities of soil and bedrock. Further collaborative work is strongly recommended, and should include more detailed isolation of intervals in wells by multi-packer installations, to better determine the geochemical and hydrological characteristics of the Karachai-Mishelyak system; deployment of a broader soil-water and soil sampling array; a more detailed examination of the distribution and concentration of radionuclides by high-resolution field gamma spectrometry; and a detailing of the area's electrical resistivity setting, using a mobile electromagnetic measurement system

SAGD gas lift completions and optimization : a field case study at Surmont

Energy Technology Data Exchange (ETDEWEB)

Handfield, T.C.; Nations, T.; Noonan, S.G. [ConocoPhillips Co., Houston, TX (United States)

2008-10-15

Gas lift completions for steam assisted gravity drainage (SAGD) producers are unique. Because of the extreme temperatures of the downhole environment, conventional gas lift valves and mandrels with a packer completion cannot be used. Most gas lifts enter the production stream downhole through open-ended tubing or nozzles, which if not properly sized could result in operational issues, such as fluid/gas slugging and pressure instabilities which negatively effect the overall lift efficiency. ConocoPhillips performed a study in 2006 to design a gas lift system for the Surmont SAGD development that would allow better control of lift gas into the production string. The wells completed with gas lift were placed on production in 2007. This paper discussed the data collection effort and analysis completed to determine the efficiency of the two types of gas lift nozzles used in the completions. It also presented the methodology for optimization of SAGD gas lift systems and recommendations for future improvement. Background information on the Surmont oil sands project, located southeast of Fort McMurray in the Athabasca oil sands was included along with a historical perspective of the SAGD Surmont gas lift experience followed by a discussion of the Surmont initial gas lift design. Last, the paper discussed the Surmont gas lift start-up and optimization. It was concluded that installation of backcheck valves in coil tubing used for gas lift may mitigate plugging issues on initial start-up and following periods of shut-down. 5 refs., 10 figs.

Socioeconomic and occupational risk factors for venous thromboembolism in Sweden: a nationwide epidemiological study.

Science.gov (United States)

Zöller, Bengt; Li, Xinjun; Sundquist, Jan; Sundquist, Kristina

2012-05-01

Our aims were to investigate possible associations between hospitalisation for venous thromboembolism (VTE) and socioeconomic and occupational factors. A nationwide database was constructed by linking Swedish census data to the Hospital Discharge Register (1990-2007). Hospital diagnoses of VTE were based on the International Classification of Diseases. Standardised incidence ratios were calculated for different socioeconomic and occupational groups. A total of 43063 individuals aged >20 years were hospitalised for VTE. Individuals with >12 years of education were at lower risk for VTE. Blue-collar workers, farmers, and non-employed individuals had higher risks for VTE, and white collar workers and professionals lower risks. In males and/or females, risks for VTE were increased for assistant nurses; farmers; miners and quarry workers; mechanics, iron and metalware workers; wood workers; food manufacture workers; packers; loaders and warehouse workers; public safety and protection workers; cooks and stewards; home helpers; building caretakers; and cleaners. Decreased risks were observed for technical, chemical, physical, and biological workers; physicians; dentists; nurses; other health and medical workers; teachers, religious, juridical, and other social science-related workers; artistic workers; clerical workers; sale agents; and fishermen, whalers and sealers. High educational level and several occupations requiring high levels of education were protective against VTE, while the risks for VTE were increased for farmers, blue-collar workers and non-employed individuals. The mechanisms are unknown but it might involve persistent psychosocial stress related to low socioeconomic and occupational status. Copyright © 2011 Elsevier Ltd. All rights reserved.

High speed intelligent classifier of tomatoes by colour, size and weight

Energy Technology Data Exchange (ETDEWEB)

Cement, J.; Novas, N.; Gazquez, J. A.; Manzano-Agugliaro, F.

2012-11-01

At present most horticultural products are classified and marketed according to quality standards, which provide a common language for growers, packers, buyers and consumers. The standardisation of both product and packaging enables greater speed and efficiency in management and marketing. Of all the vegetables grown in greenhouses, tomatoes are predominant in both surface area and tons produced. This paper will present the development and evaluation of a low investment classification system of tomatoes with these objectives: to put it at the service of producing farms and to classify for trading standards. An intelligent classifier of tomatoes has been developed by weight, diameter and colour. This system has optimised the necessary algorithms for data processing in the case of tomatoes, so that productivity is greatly increased, with the use of less expensive and lower performance electronics. The prototype is able to achieve very high speed classification, 12.5 ratings per second, using accessible and low cost commercial equipment for this. It decreases fourfold the manual sorting time and is not sensitive to the variety of tomato classified. This system facilitates the processes of standardisation and quality control, increases the competitiveness of tomato farms and impacts positively on profitability. The automatic classification system described in this work represents a contribution from the economic point of view, as it is profitable for a farm in the short term (less than six months), while the existing systems, can only be used in large trading centers. (Author) 36 refs.

Aeration to degas CO2, increase pH, and increase iron oxidation rates for efficient treatment of net alkaline mine drainage

International Nuclear Information System (INIS)

Kirby, C.S.; Dennis, A.; Kahler, A.

2009-01-01

Passive treatment systems for mine drainage use no energy other than gravity, but they require greater area than active treatment systems. Researchers are considering 'hybrid' systems that have passive and active components for increased efficiency, especially where space limitations render passive-only technology ineffective. Flow-through reactor field experiments were conducted at two large net-alkaline anthracite mine discharges in central Pennsylvania. Assuming an Fe removal rate of 20 g m -2 day -1 and Fe loading from field data, 3.6 x 10 3 and 3.0 x 10 4 m 2 oxidation ponds would be required for the passive treatment of Site 21 and Packer 5 discharges, respectively. However, only a small area is available at each site. This paper demonstrates aeration to drive off CO 2 , increase pH, and increase Fe(II) oxidation rates, enabling treatment within a small area compared to passive treatment methods, and introduces a geochemical model to accurately predict these rates as well as semi-passive treatment system sizing parameters. Both net-alkaline discharges were suboxic with a pH of ∼5.7, Fe(II) concentration of ∼16 mg L -1 , and low Mn and Al concentrations. Flow rates were ∼4000 L min -1 at Site 21 and 15,000 L min -1 at Packer 5. Three-h aeration experiments with flow rates scaled to a 14-L reactor resulted in pH increases from 5.7 to greater than 7, temperature increases from 12 to 22 deg. C, dissolved O 2 increases to saturation with respect to the atmosphere, and Fe(II) concentration decreases from 16 to -1 . A 17,000-L pilot-scale reactor at Site 21 produced similar results although aeration was not as complete as in the smaller reactor. Two non-aerated experiments at Site 21 with 13 and 25-h run times resulted in pH changes of ≤0.2 and Fe(II) concentration decreases of less than 3 mg L -1 . An Fe(II) oxidation model written in a differential equation solver matched the field experiments very well using field-measured pH, temperature, dissolved O 2

Water flow in the Oxfordian and Dogger limestone around the Meuse/Haute-Marne underground research laboratory

International Nuclear Information System (INIS)

Linard, Y.; Vinsot, A.; Delay, J.; Scholz, E.; Lundy, M.; Garry, B.; La Vaissiere, R. de; Cruchaudet, M.; Dewonck, S.; Vigneron, G.; Vincent, B.; Wechner, S.

2010-01-01

Document available in extended abstract form only. Within its scientific program to study the feasibility of a high level radioactive waste disposal in the Callovo-Oxfordian argillaceous rock (COx) of the eastern Paris Basin, Andra has conducted an extensive characterization of the Oxfordian and Dogger limestone formations above and below the COx. More than 35 wells ranging from 400 to 700 meters deep were drilled over 15 years to study a 400 km 2 area around the Andra's Meuse / Haute-Marne Underground Research Laboratory (URL). An original methodology was applied in these wells to characterize the geology, the hydrogeology and the geochemistry of the Jurassic carbonates. This multidisciplinary effort provided a unique set of 3D data. The first purpose of this study is to integrate the geological, hydrogeological and geochemical data into a water flow conceptual model. Geological data include the study of cored wells, complete modern wire-line log sets in both cored and un-cored wells, and outcrop analogues. Hydrogeological data include transmissivity and hydraulic head measurements in the Oxfordian and Dogger limestone formations. Geochemical data include several on site measurements (pH, alkalinity, electrical conductivity, temperature) and chemical and isotopic analyses performed on water samples taken at selected depths. More than one hundred hydraulic tests have been performed since 1994 to measure transmissivity distribution in the Oxfordian and Dogger limestone. Several hydraulic testing methods were used in each well: global pumping tests, fluid logging tests, thermal flow logging tests and packer tests. After completion of the hydraulic tests, hydraulic heads were deduced from long term pressure measurements in open wells or in multi-packer completions; pressure monitoring lasted between a few months and more than 10 years. Long term/high volume pumping tests were also performed after the hydraulic tests to obtain a stationary composition of the well

Stress state variations among the clay and limestone formations of the molasse basin of Northern Switzerland

International Nuclear Information System (INIS)

Vietor, Tim; Mueller, Herwig; Frieg, Bernd; Klee, Gerd

2012-01-01

Document available in extended abstract form only. Full text of publication follows: The design of geological repositories for radioactive waste responds to the requirements of technical feasibility and long-term safety in the context of a specific geological setting. An important aspect of the geological setting is the primary stress field. To a large extent the stress state controls repository induced effects such as the excavation damage zone and the associated potential changes in the waste isolation properties of the host rock. Therefore the measurement of the stress state receives some attention where the site selection for geological repositories focuses onto relatively weak host rocks such as clay-stones and marly shales that tend to develop a significant excavation damage zone. Measurements of the minimum stress magnitudes in a recently drilled geothermal well in the Molasse Basin of northern Switzerland have yielded a stress profile reaching from 592 m to 1455 m depth. It straddles several rock units and includes the top of the crystalline basement. The sedimentary sequence consists of Marine limestones, shales and marls unconformably covered by Tertiary rocks of the Molasse. In other parts of the basin the evaporitic rocks of the Triassic Muschelkalk formation at the base of the sedimentary layer served as a regional detachment and enabled thin skinned thrusting and the formation of the Jura Fold and Thrust Belt in the Late Miocene. The stress measurements have been performed in the open hole by Mini-frac tests. The method uses a double packer system to isolate a one meter long interval of the borehole that is then pressurized at high injection rates up to the breakdown of the formation. Repeated pressurization of the interval allows to determine the stress that acts on the newly created fracture. The total injected volume during such a test is in the range of a few litres and the size of the fracture that extends from the borehole normal to the minimum

The use of technology of separating horizontal wells into sections by packers in conjunction with a new geological structure concept of deposits 302-302 of the Romashkino Field

Directory of Open Access Journals (Sweden)

Z.A. Loscheva

2018-03-01

Full Text Available The work considers deposits 302-303 of the Bashkirian and Serpukhovian stages. The Kuakbashsky deposits 302-303 are confined to the carbonate layer of the Bashkirian and Serpukhovian sediments of the Middle and Lower Carboniferous, with various types of voids: intergranular, fractured and cavernous. Based on the analysis of seismic data, aerospace and geophysical data, a new model of the geological structure of deposits 302-303 was created, taking into account faults and lineaments. An analysis was made of the dynamics of horizontal wells operation, depending on the location of decompression zones, which confirmed the geological model of the deposit structure proposed by the authors. Based on the geological structure, solutions are proposed for optimization of deposits development: - During the establishment and operation of wells, it is necessary to take into account the faults location, their type, strike, predicted locations of high fracturing and cavitation zones to improve well performance; - The production mode should be developed with the obligatory observance of a balance between the filtration rate of oil from caverns into cracks and the flow of liquid from the production well. - The conducted analysis shows the complete absence of dependence of the development efficiency on the implementation of various technological measures. A comprehensive approach to the deposit blocks (limited by tectonic faults is required, starting with the selection of the block (the direct drilling site, ending with the selection modes, sequence, type and complex of geological and technical measures, individually for each well of the block.

The influence of anisotropy on capture zone analysis

International Nuclear Information System (INIS)

Hansen, K.

1995-01-01

Approximately 50,000 gallons of various grades of gasoline and aviation fuel were leaked into silty clay overburden overlying phyllite of the Wissahickon Formation. Pumping tests and measurements of water table recovery from recovery and production wells suggested that elliptical cones of depression were caused by anisotropic groundwater flow in steeply dipping fractures trending between N60 degree E and N75 degree E which were formed by weathered metamorphic foliation. Fracture trace analysis, outcrop measurements, borehole camera surveys, straddle packer testing, and test excavations supported this conceptual model for hydraulic conductivity. Using both quantitative and semi-quantitative methods, the magnitude of anisotropy was calculated from both pumping tests and water table recovery data. Calculated anisotropies showed variations related to the particular method of analysis. Simulations of capture zones using numerical techniques indicated that anisotropic conditions had produced actual capture zones influenced by groundwater flow not orthogonal to equipotential lines. Capture zone shapes were significantly distorted along the primary axis of anisotropy within the range of variation in anisotropy (n) measured by the different analysis methods. Using the mean value of anisotropy from this site (n = 14), actual recovery well capture areas were subsequently corrected for anisotropic effects. The use of capture areas corrected for the mean value of anisotropy enabled more effective placement of subsequent recovery wells. The relatively consistent foliation of rocks in the Wissahickon Formation suggested that capture zone correction should be considered when developing recovery strategies in aquifer systems where anisotropic conditions are likely

Three-dimensional chemical structure of the INEL aquifer system near the Idaho Chemical Processing Plant

International Nuclear Information System (INIS)

McCurry, M.; Estes, M.; Fromm, J.; Welhan, J.; Barrash, W.

1994-01-01

Sampling and analysis from the Snake River Plain aquifer using a stainless-steel and teflon constructed straddle-packer system has established detailed vertical profiles of aquifer chemistry from three wells near a major source of low-level waste injection at the Idaho Chemical Processing Plant. Multiple intervals, varying from 4.6 to 6.1 m in length, were sampled between the water table (140.5 mbls - meters below land surface), and approximately 200 mbls to obtain a wide spectrum of metals, anions, radiological and organic components analyses. Measurements were also made at the well sites of important transient parameters (T, Eh, Fe 3+ , Fe 2+ , DO and SC). The principal purpose of this ongoing work is to improve our understanding of the third (i.e. vertical) dimension of aquifer chemistry at the INEL as a basis for critically evaluating site-wide monitoring procedures, and, ultimately, for improving fate and transport models for aquifer contaminants within basalt-hosted aquifers. Chemical and radiological data indicates that substantial systematic vertical and lateral variations occur in the aquifer hydrochemistry - in particular for conservative radiological nuclide concentrations. Radiological data define a three-layered zonation. Ground water within upper and lower zones contain up to 10 times higher concentrations of H-3 and I-129 than in the middle zone. Sr-90 activity is decoupled from H-3 and I-129-relatively high activity was detected within the upper zone nearest the ICPP, but activities elsewhere are very low. 27 refs., 4 figs., 1 tab

Imaging Pathways in Fractured Rock Using Three-Dimensional Electrical Resistivity Tomography.

Science.gov (United States)

Robinson, Judith; Slater, Lee; Johnson, Timothy; Shapiro, Allen; Tiedeman, Claire; Ntarlagiannis, Dimitrios; Johnson, Carole; Day-Lewis, Frederick; Lacombe, Pierre; Imbrigiotta, Thomas; Lane, John

2016-03-01

Major challenges exist in delineating bedrock fracture zones because these cause abrupt changes in geological and hydrogeological properties over small distances. Borehole observations cannot sufficiently capture heterogeneity in these systems. Geophysical techniques offer the potential to image properties and processes in between boreholes. We used three-dimensional cross borehole electrical resistivity tomography (ERT) in a 9 m (diameter) × 15 m well field to capture high-resolution flow and transport processes in a fractured mudstone contaminated by chlorinated solvents, primarily trichloroethylene. Conductive (sodium bromide) and resistive (deionized water) injections were monitored in seven boreholes. Electrode arrays with isolation packers and fluid sampling ports were designed to enable acquisition of ERT measurements during pulsed tracer injections. Fracture zone locations and hydraulic pathways inferred from hydraulic head drawdown data were compared with electrical conductivity distributions from ERT measurements. Static ERT imaging has limited resolution to decipher individual fractures; however, these images showed alternating conductive and resistive zones, consistent with alternating laminated and massive mudstone units at the site. Tracer evolution and migration was clearly revealed in time-lapse ERT images and supported by in situ borehole vertical apparent conductivity profiles collected during the pulsed tracer test. While water samples provided important local information at the extraction borehole, ERT delineated tracer migration over spatial scales capturing the primary hydrogeological heterogeneity controlling flow and transport. The fate of these tracer injections at this scale could not have been quantified using borehole logging and/or borehole sampling methods alone. © 2015, National Ground Water Association.

In situ measurements of rock salt permeability changes due to nearby excavation

International Nuclear Information System (INIS)

Stormont, J.C.; Howard, C.L.; Daemen, J.J.K.

1991-07-01

The Small-Scale Mine-By was an in situ experiment to measure changes in brine and gas permeability of rock salt as a result of nearby excavation. A series of small-volume pressurized brine- and gas-filled test intervals were established 8 m beneath the floor of Room L1 in the WIPP underground. The test intervals were isolated in the bottom of the 4.8-cm diameter monitoring boreholes with inflatable rubber packers, and are initially pressurized to about 2 MPa. Both brine- and gas-filled test intervals were located 1.25, 1.5, 2, 3, and 4 r from the center of a planned large-diameter hole, where r is the radius of the large-diameter hole. Prior to the drilling of the large-diameter borehole, the responses of both the brine- and gas-filled test intervals were consistent with the formation modeled as a very low permeability, low porosity porous medium with a significant pore (brine) pressure and no measurable gas permeability. The drilling of the mine-by borehole created a zone of dilated, partially saturated rock out to about 1.5 r. The formation pressure increases from near zero at 1.5 r to the pre-excavation value at 4 r. Injection tests reveal a gradient of brine permeabilities from 5 x 10 -18 m 2 at 1.25 r to about the pre-excavation value (10 -21 m 2 ) by 3 r. Gas-injection tests reveal measurable gas permeability is limited to within 1.5 r. 17 refs., 24 figs., 6 tabs

Validation of fracture flow models in the Stripa project

International Nuclear Information System (INIS)

Herbert, A.; Dershowitz, W.; Long, J.; Hodgkinson, D.

1991-01-01

One of the objectives of Phase III of the Stripa Project is to develop and evaluate approaches for the prediction of groundwater flow and nuclide transport in a specific unexplored volume of the Stripa granite and make a comparison with data from field measurements. During the first stage of the project, a prediction of inflow to the D-holes, an array of six parallel closely spaced 100m boreholes, was made based on data from six other boreholes. This data included fracture geometry, stress, single borehole geophysical logging, crosshole and reflection radar and seismic tomogram, head monitoring and single hole packer test measurements. Maps of fracture traces on the drift walls have also been made. The D-holes are located along a future Validation Drift which will be excavated. The water inflow to the D-holes has been measured in an experiment called the Simulated Drift Experiment. The paper reviews the Simulated Drift Experiment validation exercise. Following a discussion of the approach to validation, the characterization data and its preliminary interpretation are summarised and commented upon. That work has proved feasible to carry through all the complex and interconnected tasks associated with the gathering and interpretation of characterization data, the development and application of complex models, and the comparison with measured inflows. This exercise has provided detailed feed-back to the experimental and theoretical work required for measurements and predictions of flow into the Validation Drift. Computer codes used: CHANGE, FRACMAN, MAFIC, NAPSAC and TRINET. 2 figs., 2 tabs., 19 refs

Characterization of Olkiluoto bacterial and archaeal communities by 454 pyrosequencing

Energy Technology Data Exchange (ETDEWEB)

Bomberg, M.; Nyyssoenen, M.; Itaevaara, M. [VTT Technical Research Centre of Finland, Espoo (Finland)

2012-06-15

Recent advancement in sequencing technologies, 'Next Generation Sequencing', such as FLX 454 pyrosequencing has made it possible to obtain large amounts of sequence data where previously only few sequences could be obtained. This technique is especially useful for the study of community composition of uncultured microbial populations in environmental samples. In this project, the FLX 454 pyrosequencing technique was used to obtain up to 20 000 16S rRNA sequences or 10 000 mRNA sequences from each sample for identification of the microbial species composition as well as for comparison of the microbial communities between different samples. This project focused on the characterization of active microbial communities in the groundwater at the final disposal site of high radioactive wastes in Olkiluoto by FLX 454 pyrosequencing of the bacterial and archaeal ribosomal RNA as well as of the mRNA transcripts of the dsrB gene and mcrA gene of sulphate reducing bacteria and methanogenic archaea, respectively. Specific emphasis was put on studying the relationship of active and latent sulphate reducers and methanogens by qPCR due to their important roles in deep geobiochemical processes connected to copper corrosion. Seven packered boreholes were sampled anaerobically in Olkiluoto during 2009-2010. Groundwater was pumped from specific depths and the microbial cells werecollected by filtration on a membrane. Active microbial communities were studied based on RNA extracted from the membranes and translated to copy DNA, followed by sequencing by 454 Tag pyrosequencing. A total of 27 different bacterial and 17 archaeal taxonomic groups were detected.

Analysis and interpretation of borehole hydraulic tests in deep boreholes: principles, model development, and applications

International Nuclear Information System (INIS)

Pickens, J.F.; Grisak, G.E.; Avis, J.D.; Belanger, D.W.

1987-01-01

A review of the literature on hydraulic testing and interpretive methods, particularly in low-permeability media, indicates a need for a comprehensive hydraulic testing interpretive capability. Physical limitations on boreholes, such as caving and erosion during continued drilling, as well as the high costs associated with deep-hole rigs and testing equipment, often necessitate testing under nonideal conditions with respect to antecedent pressures and temperatures. In these situations, which are common in the high-level nuclear waste programs throughout the world, the interpretive requirements include the ability to quantitatively account for thermally induced pressure responses and borehole pressure history (resulting in a time-dependent pressure profile around the borehole) as well as equipment compliance effects in low-permeability intervals. A numerical model was developed to provide the capability to handle these antecedent conditions. Sensitivity studies and practical applications are provided to illustrate the importance of thermal effects and antecedent pressure history. It is demonstrated theoretically and with examples from the Swiss (National Genossenschaft fuer die Lagerung radioaktiver Abfaelle) regional hydrogeologic characterization program that pressure changes (expressed as hydraulic head) of the order of tens to hundreds of meters can results from 1 0 to 2 0 C temperature variations during shut-in (packer isolated) tests in low-permeability formations. Misinterpreted formation pressures and hydraulic conductivity can also result from inaccurate antecedent pressure history. Interpretation of representative formation properties and pressures requires that antecedent pressure information and test period temperature data be included as an integral part of the hydraulic test analyses

Subsurface fracture mapping from geothermal wellbores. Final report

Energy Technology Data Exchange (ETDEWEB)

Hartenbaum, B.A.; Rawson, G.

1983-08-01

To advance the state-of-the-art in Hot Dry Rock technology, and evaluation is made of (1) the use of both electromagnetic and acoustic radar to map far-field fractures, (2) the use of more than twenty different conventional well logging tools to map borehole-fracture intercepts, (3) the use of magnetic dipole ranging to determine the relative positions of the injection well and the production well within the fractured zone, (4) the use of passive microseismic methods to determine the orientation and extent of hydraulic fractures, and (5) the application of signal processing techniques to fracture mapping including tomography, holography, synthetic aperture, image reconstruction, and the relative importance of phase and amplitude information. It is found that according to calculations, VHF backscatter radar has the potential for mapping fractures within a distance of 50 +- 20 meters from the wellbore. A new technique for improving fracture identification is presented. The range of acoustic radar is five to seven times greater than that of VHF radar when compared on the basis of equal resolution, i.e., equal wavelengths. Analyses of extant data indicate that when used synergistically the (1) caliper, (2) resistivity dipmeter, (3) televiewer, (4) television, (5) impression packer, and (6) acoustic transmission are useful for mapping borehole-fracture intercepts. A new model of hydraulic fracturing is presented which indicates that a hydraulic fracture is dynamically unstable; consequently, improvements in locating the crack tip may be possible. The importance of phase in signal processing is stressed and those techniques which employ phase data are emphasized for field use.

Imaging pathways in fractured rock using three-dimensional electrical resistivity tomography

Science.gov (United States)

Robinson, Judith; Slater, Lee; Johnson, Timothy B.; Shapiro, Allen M.; Tiedeman, Claire; Ntlargiannis, Dimitrios; Johnson, Carole D.; Day-Lewis, Frederick D.; Lacombe, Pierre; Imbrigiotta, Thomas; Lane, John W.

2016-01-01

Major challenges exist in delineating bedrock fracture zones because these cause abrupt changes in geological and hydrogeological properties over small distances. Borehole observations cannot sufficiently capture heterogeneity in these systems. Geophysical techniques offer the potential to image properties and processes in between boreholes. We used three-dimensional cross borehole electrical resistivity tomography (ERT) in a 9 m (diameter) × 15 m well field to capture high-resolution flow and transport processes in a fractured mudstone contaminated by chlorinated solvents, primarily trichloroethylene. Conductive (sodium bromide) and resistive (deionized water) injections were monitored in seven boreholes. Electrode arrays with isolation packers and fluid sampling ports were designed to enable acquisition of ERT measurements during pulsed tracer injections. Fracture zone locations and hydraulic pathways inferred from hydraulic head drawdown data were compared with electrical conductivity distributions from ERT measurements. Static ERT imaging has limited resolution to decipher individual fractures; however, these images showed alternating conductive and resistive zones, consistent with alternating laminated and massive mudstone units at the site. Tracer evolution and migration was clearly revealed in time-lapse ERT images and supported by in situ borehole vertical apparent conductivity profiles collected during the pulsed tracer test. While water samples provided important local information at the extraction borehole, ERT delineated tracer migration over spatial scales capturing the primary hydrogeological heterogeneity controlling flow and transport. The fate of these tracer injections at this scale could not have been quantified using borehole logging and/or borehole sampling methods alone.

Experiences from the acid stimulation of geothermal aquifers and plants; Erfahrungen bei der Saeurestimulation geothermaler Aquifere und Anlagen

Energy Technology Data Exchange (ETDEWEB)

Wolfgramm, Markus; Birner, Johannes; Lenz, Gerhard; Hoffmann, Frank; Rinke, Manfred [Geothermie Neubrandenburg GmbH, Berlin (Germany)

2012-10-16

In the course of the exploration of geothermal aquifers up to the operation of geothermal power plants, the utilization of acids and other substances such as inhibitors or powerful oxidants to secure enhanced productivities are of great significance. At the molasses basin, drillings which explore the carbonates of the Malm are stimulated repeatedly by means of hydrochloric acid after the sinking. Information from the drilling operation such as mud losses and cutting analyses are the basis for the design of stimulations. The subsequent implementation of test operations (cleaning lift, casing-lift-test in several stages) is used to estimate the short production run and the efficiency of the specific acidification. It also can be decided whether further acidifications are reasonable. Within the operation of geothermal power plants, different failures occur in the drillings as well as in the aboveground facility components. Failures can be minimized by means of the production management and inhibitors. Nevertheless, not all reasons of the scaling can be excluded fully so that regular measures are necessary in order to eliminate the failures. These measures range from mechanical methods through the combined utilization of mechanical-chemical procedures up to different methods of acidification. Beside the so-called soft acidification, stimulations via 'coiled tubing' or via utilization of acid threads with 'packer' also are possible. The investigation of the causes of the operational disturbances as well as the correct planning of the measures are significant for the application of the said stimulation processes.

Geophysical borehole logging in Lavia borehole - results and interpretation of sonic and tube wave measurements

International Nuclear Information System (INIS)

Andersson, P.; Stenberg, L.

1985-02-01

Swedish Nuclear Fuel and Waste Management Co, SKB has been contracted by Industrial Power Company LTD, TVO to perform geophysical logging in a borehole at Lavia in Western Finland. The logging has been conducted by Swedish Geological Co, SGAB in accordance with an agreement for cooperation with SKB. The depth of the borehole is 1001 m, diameter 56 mm and inclination 10-20 degrees to the vertical. The aim of the logging was to determine the various geophysical parameters in the borehole in order to interpret and understand the rock mass properties in the vicinity of the borehole. According to the contract the report covers the following main objectives: a technical description of the field work and the equipment used; a review of the theoretical base for the sonic and tube wave methods; an interpretation and presentation of the results obtained by sonic and tube wave mesurements. The evaluation of the sonic and tube wave measurements shows good correlation. On a qualitative basis there seems to be a correlation between tube wave generating points, the relative tube wave amplitudes and the hydraulic conductivity measurements performed as hydraulical tests between packers in the borehole. The low velocity anamalies in the sonic log are mainly caused by tectonic features like fractures and fracture zones but to some extent also by contacts between granite and diorite. The estimation of elastic properties of the rock mass from observation of tube wave velocity are in accordance with laboratory determinations made on core samples. (author)

Hydraulic testing in crystalline rock

International Nuclear Information System (INIS)

Almen, K.E.; Andersson, J.E.; Carlsson, L.; Hansson, K.; Larsson, N.A.

1986-12-01

Swedish Geolocical Company (SGAB) conducted and carried out single-hole hydraulic testing in borehole Fi 6 in the Finnsjoen area of central Sweden. The purpose was to make a comprehensive evaluation of different methods applicable in crystalline rocks and to recommend methods for use in current and scheduled investigations in a range of low hydraulic conductivity rocks. A total of eight different methods of testing were compared using the same equipment. This equipment was thoroughly tested as regards the elasticity of the packers and change in volume of the test section. The use of a hydraulically operated down-hole valve enabled all the tests to be conducted. Twelve different 3-m long sections were tested. The hydraulic conductivity calculated ranged from about 5x10 -14 m/s to 1x10 -6 m/s. The methods used were water injection under constant head and then at a constant rate-of-flow, each of which was followed by a pressure fall-off period. Water loss, pressure pulse, slug and drill stem tests were also performed. Interpretation was carried out using standard transient evaluation methods for flow in porous media. The methods used showed themselves to be best suited to specific conductivity ranges. Among the less time-consuming methods, water loss, slug and drill stem tests usually gave somewhat higher hydraulic conductivity values but still comparable to those obtained using the more time-consuming tests. These latter tests, however, provided supplementary information on hydraulic and physical properties and flow conditions, together with hydraulic conductivity values representing a larger volume of rock. (orig./HP)

Combined use of heat and saline tracer to estimate aquifer properties in a forced gradient test

Science.gov (United States)

Colombani, N.; Giambastiani, B. M. S.; Mastrocicco, M.

2015-06-01

Usually electrolytic tracers are employed for subsurface characterization, but the interpretation of tracer test data collected by low cost techniques, such as electrical conductivity logging, can be biased by cation exchange reactions. To characterize the aquifer transport properties a saline and heat forced gradient test was employed. The field site, located near Ferrara (Northern Italy), is a well characterized site, which covers an area of 200 m2 and is equipped with a grid of 13 monitoring wells. A two-well (injection and pumping) system was employed to perform the forced gradient test and a straddle packer was installed in the injection well to avoid in-well artificial mixing. The contemporary continuous monitor of hydraulic head, electrical conductivity and temperature within the wells permitted to obtain a robust dataset, which was then used to accurately simulate injection conditions, to calibrate a 3D transient flow and transport model and to obtain aquifer properties at small scale. The transient groundwater flow and solute-heat transport model was built using SEAWAT. The result significance was further investigated by comparing the results with already published column experiments and a natural gradient tracer test performed in the same field. The test procedure shown here can provide a fast and low cost technique to characterize coarse grain aquifer properties, although some limitations can be highlighted, such as the small value of the dispersion coefficient compared to values obtained by natural gradient tracer test, or the fast depletion of heat signal due to high thermal diffusivity.

Hydrogeological study of single water conducting fracture using a crosshole hydraulic test apparatus

International Nuclear Information System (INIS)

Yamamoto, Hajime; Shimo, Michito; Yamamoto, Takuya

1998-03-01

The Crosshole Injection Test Apparatus has been constructed to evaluate the hydraulic properties and conditions, such as hydraulic conductivity and its anisotropy, storage coefficient, pore pressure etc. within a rock near a drift. The construction started in FY93 and completed on August FY96 as a set of equipments for the use of crosshole hydraulic test, which is composed of one injection borehole instrument, one observation borehole instrument and a set of on-ground instrument. In FY96, in-situ feasibility test was conducted at a 550 m level drift in Kamaishi In Situ Test Site which has been operated by PNC, and the performance of the equipment and its applicability to various types of injection method were confirmed. In this year, a hydrogeological investigation on the single water conducting fracture was conducted at a 250 m level drift in Kamaishi In Situ Test Site, using two boreholes, KCH-3 and KCH-4, both of which are 30 m depth and inclined by 45 degrees from the surface. Pressure responses at the KCH-3 borehole during the drilling of KCH-4 borehole, the results of Borehole TV logging and core observation indicated that a major conductive single-fracture was successfully isolated by the packers. As a result of a series of the single-hole and the crosshole tests (sinusoidal and constant flowrate test), the hydraulic parameters of the single-fracture (such as hydraulic conductivity and storage coefficient) were determined. This report shows all the test result, analysed data, and also describes the hydro-geological structure near the drift. (author)

Analysis of pumping tests of the Culebra dolomite conducted at the H-11 hydropad at the Waste Isolation Pilot Plant (WIPP) site

International Nuclear Information System (INIS)

Saulnier, G.J. Jr.

1987-01-01

The Culebra Dolomite Member of the Permian Rustler Formation was hydrologically evaluated in a series of pumping tests conducted at the H-11 hydropad at the Waste Isolation Pilot Plant (WIPP) site. At H-11, the Culebra dolomite is a 25-ft thick argillaceous dolomite with 0.1- to 0.5-foot thick layers with a high density of vugs. The vugs range in size from 0.1 to 0.5 inches in diameter; most are 0.1 to 0.2 inches in diameter. The thin vuggy layers alternate with thicker, more competent layers which have few vugs, but which do contain high-angle fractures. Some of the vugs and fractures are gypsum-filled. Three pumping tests consisted of 12- to 21-hour pumping periods at each of the three wells, while using the other two wells at the hydropad as observation wells. An additional pumping test was conducted at H-11b3 with H-11b1 and H-11b2 as observation wells. The test was a 32-day multirate test with four pumping and recovery periods. The original tests were conducted by lowering a submersible pump and pressure transducers in the boreholes. The additional test added a downhole packer with feed-through assembly designed to isolate the test interval and reduce or minimize the effect of wellbore storage. The data from all tests were recorded and stored on floppy disks. The pumping tests at the H-11 hydropad were analyzed with the INTERPRET reservoir-analysis software. 46 refs., 46 figs., 12 tabs

In situ stress and pore pressure in the Kumano Forearc Basin, offshore SW Honshu from downhole measurements during riser drilling

Science.gov (United States)

Saffer, D. M.; Flemings, P. B.; Boutt, D.; Doan, M.-L.; Ito, T.; McNeill, L.; Byrne, T.; Conin, M.; Lin, W.; Kano, Y.; Araki, E.; Eguchi, N.; Toczko, S.

2013-05-01

situ stress and pore pressure are key parameters governing rock deformation, yet direct measurements of these quantities are rare. During Integrated Ocean Drilling Program (IODP) Expedition #319, we drilled through a forearc basin at the Nankai subduction zone and into the underlying accretionary prism. We used the Modular Formation Dynamics Tester tool (MDT) for the first time in IODP to measure in situ minimum stress, pore pressure, and permeability at 11 depths between 729.9 and 1533.9 mbsf. Leak-off testing at 708.6 mbsf conducted as part of drilling operations provided a second measurement of minimum stress. The MDT campaign included nine single-probe (SP) tests to measure permeability and in situ pore pressure and two dual-packer (DP) tests to measure minimum principal stress. Permeabilities defined from the SP tests range from 6.53 × 10-17 to 4.23 × 10-14 m2. Pore fluid pressures are near hydrostatic throughout the section despite rapid sedimentation. This is consistent with the measured hydraulic diffusivity of the sediments and suggests that the forearc basin should not trap overpressures within the upper plate of the subduction zone. Minimum principal stresses are consistently lower than the vertical stress. We estimate the maximum horizontal stress from wellbore failures at the leak-off test and shallow MDT DP test depths. The results indicate a normal or strike-slip stress regime, consistent with the observation of abundant active normal faults in the seaward-most part of the basin, and a general decrease in fault activity in the vicinity of Site C0009.

Applicability of initial stress measurement methods to Horonobe Siliceous rocks and initial stress state around Horonobe Underground Research Laboratory

International Nuclear Information System (INIS)

Sanada, Hiroyuki; Niunoya, Sumio; Matsui, Hiroya; Fujii, Yoshiaki

2009-01-01

Understanding initial stress condition in deep underground is important for such construction as rock cavern for geological disposal of HLW and underground power plant. Neogene sedimentary rock is widely distributed in Japan. There are only a few studies of initial stress measurement in Neogene sedimentary rock mass in Japan due to difficulty of measurement. Evaluation of initial stress condition around Horonobe Underground Research Laboratory Project was carried out in order to understand initial stress condition and applicability of AE, DSCA and hydraulic fracturing (HF) methods to Neogene sedimentary rock. Initial stress values obtained from AE method is smaller than overburden pressure due to time dependency of Kaizer effect. It would be difficult to use AE method as initial stress measurement method for Horonobe Siliceous rocks. Principal stress values by DSCA are similar to those by HF tests. Directions of maximum horizontal principal stresses are approximately in E-W and corresponded to HF results. In HF, rod type and wire-line type systems were compared. Workability of rod type was much better than wire-line type. However, re-opening pressure were not able to be precisely measured in case of rod type system due to the large compliance of the packers and rods. Horizontal maximum and minimum principal stresses increase linearly in HF results. Deviatoric stress is acting at shallow depth. Initial stress condition approaches hydrostatic condition with depth. Direction of maximum horizontal principal stress was in E-W direction which was similar to tectonic movement around Horonobe URL by triangular surveying. (author)

Characterization of Olkiluoto bacterial and archaeal communities by 454 pyrosequencing

Energy Technology Data Exchange (ETDEWEB)

Bomberg, M; Nyyssoenen, M; Itaevaara, M [VTT Technical Research Centre of Finland, Espoo (Finland)

2012-06-15

Recent advancement in sequencing technologies, 'Next Generation Sequencing', such as FLX 454 pyrosequencing has made it possible to obtain large amounts of sequence data where previously only few sequences could be obtained. This technique is especially useful for the study of community composition of uncultured microbial populations in environmental samples. In this project, the FLX 454 pyrosequencing technique was used to obtain up to 20 000 16S rRNA sequences or 10 000 mRNA sequences from each sample for identification of the microbial species composition as well as for comparison of the microbial communities between different samples. This project focused on the characterization of active microbial communities in the groundwater at the final disposal site of high radioactive wastes in Olkiluoto by FLX 454 pyrosequencing of the bacterial and archaeal ribosomal RNA as well as of the mRNA transcripts of the dsrB gene and mcrA gene of sulphate reducing bacteria and methanogenic archaea, respectively. Specific emphasis was put on studying the relationship of active and latent sulphate reducers and methanogens by qPCR due to their important roles in deep geobiochemical processes connected to copper corrosion. Seven packered boreholes were sampled anaerobically in Olkiluoto during 2009-2010. Groundwater was pumped from specific depths and the microbial cells werecollected by filtration on a membrane. Active microbial communities were studied based on RNA extracted from the membranes and translated to copy DNA, followed by sequencing by 454 Tag pyrosequencing. A total of 27 different bacterial and 17 archaeal taxonomic groups were detected.

Characterization of Olkiluoto bacterial and archaeal communities by 454 pyrosequencing

International Nuclear Information System (INIS)

Bomberg, M.; Nyyssoenen, M.; Itaevaara, M.

2012-06-01

Recent advancement in sequencing technologies, 'Next Generation Sequencing', such as FLX 454 pyrosequencing has made it possible to obtain large amounts of sequence data where previously only few sequences could be obtained. This technique is especially useful for the study of community composition of uncultured microbial populations in environmental samples. In this project, the FLX 454 pyrosequencing technique was used to obtain up to 20 000 16S rRNA sequences or 10 000 mRNA sequences from each sample for identification of the microbial species composition as well as for comparison of the microbial communities between different samples. This project focused on the characterization of active microbial communities in the groundwater at the final disposal site of high radioactive wastes in Olkiluoto by FLX 454 pyrosequencing of the bacterial and archaeal ribosomal RNA as well as of the mRNA transcripts of the dsrB gene and mcrA gene of sulphate reducing bacteria and methanogenic archaea, respectively. Specific emphasis was put on studying the relationship of active and latent sulphate reducers and methanogens by qPCR due to their important roles in deep geobiochemical processes connected to copper corrosion. Seven packered boreholes were sampled anaerobically in Olkiluoto during 2009-2010. Groundwater was pumped from specific depths and the microbial cells werecollected by filtration on a membrane. Active microbial communities were studied based on RNA extracted from the membranes and translated to copy DNA, followed by sequencing by 454 Tag pyrosequencing. A total of 27 different bacterial and 17 archaeal taxonomic groups were detected

Site characterization and validation - Head variations during the entire experimental period

International Nuclear Information System (INIS)

Haigh, D.; Brightman, M.; Black, J.; Parry, S.

1992-01-01

The site characterization and validation project lasted for five years from 1986 to 1991. It consisted of a number of experiments within the region known as the SCV site. During this period of experimentation a monitoring system was established within the mine for the purpose of measuring the variation of head at a number of locations within and around the site. The system installed was based around a set of equipment known as a Piezomac TM system. In this system there is one central pressure transducer and each borehole interval is connected to it in turn. It can measure up to 55 separate points during each measurement 'cycle'. Monitoring points were either complete boreholes or sections of boreholes isolated by packers. In order to produce reasonable file size, data sets were screened. The results show that the SCV site was always responding to some form of hydrogeological disturbance. Many key tests were performed against changing background trends. This was particularly so of the simulated drift experiment and the large scale crosshole tests. However, some estimates of long term equilibrium heads before and after excavation of the validation drift have been made. Contoured plots of heads before and after show significant reduction of steady state heads as a result of drift excavation. Furthermore contouring the estimated long term drawdowns responding to the simulated drift experiment shows the specific influence of the H zone and the A/B zone. Overall the results of the monitoring show that the mine was a very active hydrogeological environment during the experimentation. Additionally it was often very difficult to clearly identify the causes of such disturbances. (au)

Stochastic mechano-chemical kinetics of molecular motors: A multidisciplinary enterprise from a physicist’s perspective

Energy Technology Data Exchange (ETDEWEB)

Chowdhury, Debashish, E-mail: debchg@gmail.com

2013-08-01

A molecular motor is made of either a single macromolecule or a macromolecular complex. Just like their macroscopic counterparts, molecular motors “transduce” input energy into mechanical work. All the nano-motors considered here operate under isothermal conditions far from equilibrium. Moreover, one of the possible mechanisms of energy transduction, called Brownian ratchet, does not even have any macroscopic counterpart. But, molecular motor is not synonymous with Brownian ratchet; a large number of molecular motors execute a noisy power stroke, rather than operating as Brownian ratchet. We review not only the structural design and stochastic kinetics of individual single motors, but also their coordination, cooperation and competition as well as the assembly of multi-module motors in various intracellular kinetic processes. Although all the motors considered here execute mechanical movements, efficiency and power output are not necessarily good measures of performance of some motors. Among the intracellular nano-motors, we consider the porters, sliders and rowers, pistons and hooks, exporters, importers, packers and movers as well as those that also synthesize, manipulate and degrade “macromolecules of life”. We review mostly the quantitative models for the kinetics of these motors. We also describe several of those motor-driven intracellular stochastic processes for which quantitative models are yet to be developed. In part I, we discuss mainly the methodology and the generic models of various important classes of molecular motors. In part II, we review many specific examples emphasizing the unity of the basic mechanisms as well as diversity of operations arising from the differences in their detailed structure and kinetics. Multi-disciplinary research is presented here from the perspective of physicists.

Abdominal X-ray signs of intra-intestinal drug smuggling.

Science.gov (United States)

Niewiarowski, Sylwia; Gogbashian, Andrew; Afaq, Asim; Kantor, Robin; Win, Zarni

2010-05-01

"Body packers" either swallow or insert drug filled packets rectally or vaginally in order to smuggle illicit drugs. AXR is used routinely to screen suspects for the presence of intra-intestinal drug packages. AXR diagnosis can be difficult as stool or gas within the intestine may resemble ingested foreign bodies. We identify the frequency and co-existence of several signs; tic-tac sign, rosette sign, double condom sign, dense surrounding material, density and discover a new sign; parallelism, which will aid in increasing the radiological accuracy. We retrospectively reviewed 285 AXRs performed for suspicion of drug smuggling during the period of March 2006-March 2009 to identify the frequency of these signs. Of the 285 AXRs performed 59 were positive, 221 negative and five were indeterminate. The tic-tac sign was present in 93%, double condom sign in 73%, dense surrounding wrapping material in 36% and parallelism in 27%. Sixty one percentage of drug packages were iso-dense to faeces and 39% hyperdense. Twenty percentage of the positive abdominal radiographs demonstrated one of the radiographic signs, 39% demonstrated two signs, 32% demonstrated three and 7% four. The most common radiographic sign combination was the tic-tac sign with either dense surrounding material or double condom sign. The most commonly encountered radiographic sign is the tic-tac sign, followed by the double condom sign and dense surrounding material. We also discover a new sign, "parallelism" which although uncommon is highly specific. Accuracy is further increased by comparing the density of packages to faeces and looking for the co-existence of multiple signs. Copyright (c) 2010 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

Air-injection testing in vertical boreholes in welded and nonwelded Tuff, Yucca Mountain, Nevada

Energy Technology Data Exchange (ETDEWEB)

LeCain, G.D.

1997-12-31

Air-injection tests, by use of straddle packers, were done in four vertical boreholes (UE-25 UZ-No.16, USW SD-12, USW NRG-6, and USW NRG-7a) at Yucca Mountain, Nevada. The geologic units tested were the Tiva Canyon Tuff, nonwelded tuffs of the Paintbrush Group, Topopah Spring Tuff, and Calico Hills Formation. Air-injection permeability values of the Tiva Canyon Tuff ranged from 0.3 x 10{sup -12} to 54.0 x 10{sup -12} m{sup 2}(square meter). Air-injection permeability values of the Paintbrush nonwelded tuff ranged from 0.12 x 10{sup -12} to 3.0 x 10{sup -12} m{sup 2}. Air-injection permeability values of the Topopah Spring Tuff ranged from 0.02 x 10{sup -12} to 33.0 x 10{sup -12} m{sup 2}. The air-injection permeability value of the only Calico Hills Formation interval tested was 0.025 x 10{sup -12} m{sup 2}. The shallow test intervals of the Tiva Canyon Tuff had the highest air-injection permeability values. Variograms of the air-injection permeability values of the Topopah Spring Tuff show a hole effect; an initial increase in the variogram values is followed by a decrease. The hole effect is due to the decrease in permeability with depth identified in several geologic zones. The hole effect indicates some structural control of the permeability distribution, possibly associated with the deposition and cooling of the tuff. Analysis of variance indicates that the air-injection permeability values of borehole NRG-7a of the Topopah Spring Tuff are different from the other boreholes; this indicates areal variation in permeability.

The channeling experiment - instrumentation and site preparation

International Nuclear Information System (INIS)

Abelin, H.; Birgersson, L.; Aagren, T.

1990-01-01

Physical properties of in situ single fractures have been investigated by drilling large diameter holes (200 mm) 2.5 to 3 m into and along prominent single fractures. Photo logs as well as hydraulic- tracer tests have been performed. The experiment is divided into two parts, (1) the single hole experiments and (2) the double hole experiment. In the single hole experiment water was injected into the fracture and the injection flowrates over 50 mm sections along the fracture plane were monitored. In the double hole test two parallel large diameter holes, in the same fracture, 1.75 m apart, have been used for pressure pulse tests and a tracer test where 5 different nonsorbing tracers were injected. Equipment has been designed for water injection into single fractures where injection flowrates and pressure responses are simultaneously monitored in twenty 50 mm sections along the intersection of the fracture with the bore hole. The Multipede injection packer designed to be used in diameter 200 mm bore hole with a maximum depth of 2.5 m. Injection is done with constant pressure which is stable within ±0.0025 bar, and can be separately adjusted for each of the 20 injection zones. Injection flowrates can be monitored with a resolution of 1/100 ml/h, which equals one drop of water every five hours. The injection and pressure pulse tests are run by a computer and all data are stored on magnetic disks. A fracture survey at the 360 m level and adjacent levels has been done. The survey focused on prominent planar fractures with extension of more than 2 m. Approximately 100 fractures were found. (authors)

Diagnóstico bacteriológico de la tos convulsiva

Directory of Open Access Journals (Sweden)

Germán Battistini Moore

1944-09-01

Full Text Available El diagnóstico bacteriológico de la tos convulsiva es una necesidad que debe ser efectuada en todo enfermo que presente manifestaciones clínicas incipientes de esta enfermedad. Las técnicas para su realización han sufrido sucesivas modificaciones a fin de obtener ventajas tanto en su simplicidad como en su rendimiento. La técnica de CHIVIETZ y MEYER (1916 ha sido la más usualmente empleada, pero dificultades especialmente de parte del enfermo (espasmo natural, edad, estado físico, etc., diversos investigadores (SUGARE, Mc. LEOD, KRISTENSEN, STRAKER, etc. ensayaron otros métodos realizando siembras directas de secresión laríngea tomada con distintos dispositivos y maniobras, obteniendo más comodidad y mejor rendimiento que el uso de la "placa de tos" (CHIVIETZ y MEYER; posteriormente el método de la torunda de algodón se perfecciona más (BRADFORT, SLAVIN; MORRIS, BRADFORD y PACKER; SAITO, MILLER y LEACH quedando establecido que la mayor efectividad para el diagnóstico bacteriológico de la tos convulsiva es la siembra del exudado naso-faríngeo tomado con una torunda. de algodón. Nosotros hemos ensayado estos distintos métodos encontrando las mismas dificultades, de ahí que guiados por los trabajos de A. FLEMING en el uso de una substancia bacteriostática para aislar mejor el germen, y teniendo la oportunidad de contar precisamente con la adecuada, la penicilina, hemos podido realizar ensayos a este fin, habiendo logrado resultados halagadores, como se puede apreciar en lo expuesto.

Sampling and chemical analysis of groundwaters from the exploratory boreholes

International Nuclear Information System (INIS)

Wittwer, C.

1986-10-01

As a part of the Nagra geological investigation programme in northern Switzerland, numerous water samples were taken in the Boettstein, Weiach, Riniken, Schafisheim, Kaisten and Leuggern boreholes to obtain information on the chemistry and residence times of deep groundwaters. This report contains a compilation of hydrochemical data, comments on the individual water sampling actions and an evaluation of sample quality with respect to admixing of drilling fluids. The samples were taken from separate test intervals in the sediments and the crystalline rock. After removal of various types of drilling fluids such as mud as well as fresh water or deionised water during a cleaning phase, the samples were taken at the surface or at depth using pressure vessels. The tracers added to the drilling fluids (uranine, m-TFMBA) as well as the tritium content were used for a quantiative estimation of the content of drilling fluid in the samples (contamination). With a view fo further geochemical modelling, the samples were assessed with reference to the effect of contamination on the results of the chemical analyses. A total of 68 water samples were taken from 53 different intervals: - 27 samples had problem-free cleaning phases and were taken with negligible contamination. - 23 samples were taken under difficult conditions. Problems with hydraulic communication around packers, uncertain origin, inaccuracy as to extent of contamination, presence of cement, possible traces of salt from drilling fluid etc. meant that the analyses could only be used with extreme caution or after additional data-processing. - The analysis results from 18 samples will be disregarded due to significant drilling fluid content or because more reliable data are available for the same test interval. (author)

ANIMAL BEHAVIOR AND WELL-BEING SYMPOSIUM: The Common Swine Industry Audit: Future steps to assure positive on-farm animal welfare utilizing validated, repeatable and feasible animal-based measures.

Science.gov (United States)

Pairis-Garcia, M; Moeller, S J

2017-03-01

The Common Swine Industry Audit (CSIA) was developed and scientifically evaluated through the combined efforts of a task force consisting of university scientists, veterinarians, pork producers, packers, processers, and retail and food service personnel to provide stakeholders throughout the pork chain with a consistent, reliable, and verifiable system to ensure on-farm swine welfare and food safety. The CSIA tool was built from the framework of the Pork Quality Assurance Plus (PQA Plus) site assessment program with the purpose of developing a single, common audit platform for the U.S. swine industry. Twenty-seven key aspects of swine care are captured and evaluated in CSIA and cover the specific focal areas of animal records, animal observations, facilities, and caretakers. Animal-based measures represent approximately 50% of CSIA evaluation criteria and encompass critical failure criteria, including observation of willful acts of abuse and determination of timely euthanasia. Objective, science-based measures of animal well-being parameters (e.g., BCS, lameness, lesions, hernias) are assessed within CSIA using statistically validated sample sizes providing a detection ability of 1% with 95% confidence. The common CSIA platform is used to identify care issues and facilitate continuous improvement in animal care through a validated, repeatable, and feasible animal-based audit process. Task force members provide continual updates to the CSIA tool with a specific focus toward 1) identification and interpretation of appropriate animal-based measures that provide inherent value to pig welfare, 2) establishment of acceptability thresholds for animal-based measures, and 3) interpretation of CSIA data for use and improvement of welfare within the U.S. swine industry.

Low-dose computed tomography for the detection of cocaine body packs. Clinical evaluation and legal issues; Niedrigdosis-Computertomografieprotokoll zur Detektion von Kokain-Bodypacks. Klinische Evaluation und rechtliche Aspekte

Energy Technology Data Exchange (ETDEWEB)

Pache, G.; Bulla, S.; Baumann, T.; Langer, M.; Blanke, P. [Universitaetsklinikum Freiburg (Germany). Radiologische Klinik; Einhaus, D. [Kanzlei Dr. Einhaus und Partner, Freiburg (Germany)

2012-02-15

Purpose: To discuss the juridical basis for CT examinations of cocaine body packers and to evaluate the clinical implementation of a tube current reduction-based low-dose CT protocol. Materials and Methods: A literature search was performed to discuss the legal basis regarding the problem, the procedures, the potential harm and the proportionality. Retrospective evaluation of 8 patients who had undergone a low-dose CT scan (body mass index < 25 kg/m{sup 2} 30 mAs; > 25 kg/m{sup 2} 60 mAs) during the time period from February until October 2009 in order to exclude or to assess remaining cocaine body packs was approved by the institutional review board. The detectability and condition of the body packs were analyzed. Effective doses were calculated. Results: German jurisdiction does not distinguish between plain film X-ray and CT examinations. Both plain film X-ray and CT examination require a judicial warrant. However, examination results might still remain valid if a warrant was not requested. In 8 examinations (30 mAs n = 3, 60 mAs n = 5, mean BMI 25.9 {+-} 3.2.) a total of 34 body packs were correctly identified. The mean density of the body packs was 74.4 {+-} 31.9 HU (range 17 - 154 HU) with a cocaine content between 22.5 % and 72.8 %. The mean estimated radiation dose was 2.23 {+-} 0.72 mSv. Conclusion: Although medical legal aspects do not specify the diagnostic procedure to be performed, the high diagnostic accuracy and applied radiation dose reduction could establish low-dose CT as the method of choice for detecting cocaine body packs, thereby potentially avoiding future legal problems. (orig.)

Summary of air permeability data from single-hole injection tests in unsaturated fractured tuffs at the Apache Leap Research Site: Results of steady-state test interpretation

International Nuclear Information System (INIS)

Guzman, A.G.; Geddis, A.M.; Henrich, M.J.; Lohrstorfer, C.F.; Neuman, S.P.

1996-03-01

This document summarizes air permeability estimates obtained from single hole pneumatic injection tests in unsaturated fractured tuffs at the Covered Borehole Site (CBS) within the larger apache Leap Research Site (ALRS). Only permeability estimates obtained from a steady state interpretation of relatively stable pressure and flow rate data are included. Tests were conducted in five boreholes inclined at 45 degree to the horizontal, and one vertical borehole. Over 180 borehole segments were tested by setting the packers 1 m apart. Additional tests were conducted in segments of lengths 0.5, 2.0, and 3.0 m in one borehole, and 2.0 m in another borehole, bringing the total number of tests to over 270. Tests were conducted by maintaining a constant injection rate until air pressure became relatively stable and remained so for some time. The injection rate was then incremented by a constant value and the procedure repeated. The air injection rate, pressure, temperature, and relative humidity were recorded. For each relatively stable period of injection rate and pressure, air permeability was estimated by treating the rock around each test interval as a uniform, isotropic porous medium within which air flows as a single phase under steady state, in a pressure field exhibiting prolate spheroidal symmetry. For each permeability estimate the authors list the corresponding injection rate, pressure, temperature and relative humidity. They also present selected graphs which show how the latter quantities vary with time; logarithmic plots of pressure versus time which demonstrate the importance of borehole storage effects during the early transient portion of each incremental test period; and semilogarithmic plots of pressure versus recovery time at the end of each test sequence

A review of shape memory material’s applications in the offshore oil and gas industry

Science.gov (United States)

Patil, Devendra; Song, Gangbing

2017-09-01

The continuously increasing demand for oil and gas and the depleting number of new large reservoir discoveries have made it necessary for the oil and gas industry to investigate and design new, improved technologies that unlock new sources of energy and squeeze more from existing resources. Shape memory materials (SMM), with their remarkable properties such as the shape memory effect (SME), corrosion resistance, and superelasticity have shown great potential to meet these demands by significantly improving the functionality and durability of offshore systems. Shape memory alloy (SMA) and shape memory polymer (SMP) are two types of most commonly used SMM’s and are ideally suited for use over a range of robust engineering applications found within the oil and gas industry, such as deepwater actuators, valves, underwater connectors, seals, self-torqueing fasteners and sand management. The potential high strain and high force output of the SME of SMA can be harnessed to create a lightweight, solid state alternative to conventional hydraulic, pneumatic or motor based actuator systems. The phase transformation property enables the SMA to withstand erosive stresses, which is useful for minimizing the effect of erosion often experienced by downhole devices. The superelasticity of the SMA provides good energy dissipation, and can overcome the various defects and limitations suffered by conventional passive damping methods. The higher strain recovery during SME makes SMP ideal for developments of packers and sand management in downhole. The increasing number of SMM related research papers and patents from oil and gas industry indicate the growing research interest of the industry to implement SMM in offshore applications. This paper reviews the recent developments and applications of SMM in the offshore oil and gas industry.

Hydrogeology of the rock mass encountered at the 240 level of Canada's Underground Research Laboratory

International Nuclear Information System (INIS)

Kozak, E.T.; Davison, C.C.

1992-09-01

The rock mass surrounding the 240 level of Canada's Underground Research Laboratory (URL) has been hydrogeologically characterized through observations made in the tunnel and room excavations and from a network of radiating low-dipping boreholes. The 240 level complex sits in a wedge of grey-to-pink granite between two important, low-dipping, hydraulically active fracture zones, known as Fracture Zone 2 (FZ2) and Fracture Zone 2.5 (FZ2.5), a splay of FZ2. There is no apparent seepage into the 240 level room and tunnel network from the surrounding rock mass except from a vertical fracture intersected by the Room 209 tunnel. Extensive hydraulic and geomechanical tests have been conducted in boreholes intersecting the Room 209 vertical fracture, and transmissivities were found to range from 10 -10 to 10 -6 m 2 /s. FZ2 and FZ2.5 occur at the 240 m depth approximately 10 m to the west and 100 m to the south respectively of the 240 level tunnel network. Hydraulic testing within packer-isolated boreholes intersecting these fracture zones showed that transmissivities ranged from 10 -7 to 10 -5 m 2 /s in FZ2, and 10 -9 to 10 -7 m 2 /s in FZ2.5. No naturally-occurring fractures were encountered east of the 240 level complex up to 300 m away. The rock mass to the north of the 240 level is dominated by the Room 209 vertical fracture, which tends to splay with distance and has been intersected 95 m from the Room 209 tunnel. (Author) (50 figs., 5 tabs., 10 refs.)

An Approach Using Gas Monitoring to Find the Residual TCE Location in the Unsaturated Zone of Woosan Industrial Complex (WIC), Korea

Science.gov (United States)

Koh, Y.; Lee, S.; Yang, J.; Lee, K.

2012-12-01

An area accommodating various industrial facilities has fairly high probability of groundwater contamination with multiple chlorinated solvents such as trichloroethene (TCE), carbon tetrachloride (CT), and chloroform (CF). Source tracing of chlorinated solvents in the unsaturated zone is an essential procedure for the management and remediation of contaminated area. From the previous study on seasonal variations in hydrological stresses and spatial variations in geologic conditions on a TCE plume, the existence of residual DNAPLs at or above the water table has proved. Since TCE is one of the frequently detected VOCs (Volatile Organic Compounds) in groundwater, residual TCE can be detected by gas monitoring. Therefore, monitoring of temporal and spatial variations in the gas phase TCE contaminant at an industrial complex in Wonju, Korea, were used to find the residual TCE locations. As pilot tests, TCE gas samples collected in the unsaturated zone at 4 different wells were analyzed using SPME (Solid Phase MicroExtraction) fiber and Gas Chromatography (GC). The results indicated that detecting TCE in gas phase was successful from these wells and TCE analysis on gas samples, collected from the unsaturated zone, will be useful for source area characterization. However, some values were too high to doubt the accuracy of the current method, which needs a preliminary lab test with known concentrations. The modified experiment setups using packer at different depths are in process to find residual TCE locations in the unsaturated zone. Meanwhile, several PVD (polyethylene-membrane Passive Vapor Diffusion) samplers were placed under water table to detect VOCs by equilibrium between air in the vial and VOCs in pore water.

Evaluating hydrochemical data from shallow groundwater in Forsmark from a microbiological perspective

International Nuclear Information System (INIS)

Hallbeck, Lotta

2008-03-01

Oxygen is one of the chemical species that can corrode a copper canister in a KBS-3 repository. It is therefore important to determine whether oxygen dissolved in precipitation or groundwater could reach repository depth by groundwater transport. This matter can be determined by gaining an understanding of the oxygen-consuming microbial processes that take place in shallow groundwater in the area of interest. This report evaluates hydrogeochemical data from shallow groundwater in the Forsmark area from a microbiological perspective. Hydrogeochemical data were gathered from soil pipes at depths from 1.6 to 9.6 m and from percussion-drilled boreholes having mid-point depths of between c. 30 and c. 180 m. Only a few of the percussion-drilled boreholes had packers installed. The sampled sections were therefore very long, allowing groundwater from many different depths to mix. Oxygen and oxidation-reduction potential (ORP) were measured in groundwater in soil pipes but not in percussion-drilled boreholes. The poor quality of the oxygen data made it difficult to identify the depth of origin of completely oxygen-free groundwater. Parameters that indicated ongoing anaerobic microbial processes, such as nitrite, ferrous iron, dissolved manganese, and sulphide, were found in many soil pipes. The soil pipes displayed individual chemical profiles in terms of chemical species related to microbial activity. The microbial activity could not be linked to the classes of soil pipe, i.e. recharge, discharge, or intermittent. Existing soil pipes and percussion-drilled boreholes could be used for additional sampling of microbial parameters. Such sampling would benefit from careful hypothesis-driven description of the sampling parameters and experience-guided choice of sampling methods

Field testing the effectiveness of pumping to remove sulfur hexafluoride traced drilling air from a prototype borehole near superior, Arizona

International Nuclear Information System (INIS)

Peters, C.A.; Striffler, P.; Yang, I.C.; Ferarese, J.

1993-01-01

The US Geological Survey (USGS), Department of the Interior is conducting studies at Yucca Mountain, Nevada, to provide hydrologic, hydrochemical, and geologic information to evaluate the suitability of Yucca Mountain for development as a high-level nuclear-waste repository. The USGS unsaturated-zone hydrochemistry study involves the collection of gas and water samples from the unsaturated zone for chemical and isotopic analyses. Results from these analyses will aid in the understanding of the movement of gas and water in the rock units at Yucca Mountain. A prototype borehole designated USW UZP5 was drilled by the US Department of Energy, Yucca Mountain Site Characterization Project Office (DOE, YMSCPO) in June 1990 in the Apache Leap Tuff of southcentral Arizona. The hole was dry drilled with air using sulfur hexafluoride (SF 6 ) as a tracer. This drilling method simulated that which will be used to drill boreholes for the collection of gas and water samples at Yucca Mountain. The purpose of tracing the drilling air is to quantify its removal by pumping, prior to sampling of in situ gases. The objectives of our work in Arizona were to: (1) Determine the amount of time and the pumping rates required to remove the SF 6 -enriched drilling air without inducing additional atmospheric contamination; (2) collect core samples for uniaxial compression to determine the amount of SF 6 gas that penetrated the core during drilling; (3) test the effectiveness of the SF 6 injection and sampling system; (4) test the installation and effectiveness of the prototype packer system; and (5) test the effectiveness of several core sealing methods. 1 fig., 1 tab

Difference flow measurements and hydraulic interference test in ONKALO at Olkiluoto drillholes ONK-PH16 and ONK-PH17

Energy Technology Data Exchange (ETDEWEB)

Komulainen, J.; Pekkanen, J. [Poyry Finland Oy, Espoo (Finland)

2012-08-15

The Posiva Flow Log, Difference Flow Method (PFL DIFF) uses a flowmeter that incorporates a flow guide and can be used for relatively quick determinations of hydraulic conductivity and hydraulic head in fractures/fractured zones in cored drillholes. This report presents the principles of the method as well as the results of the measurements carried out in the underground facilities of ONKALO. The measurements were conducted in pilot holes ONK-PH16 and ONK-PH17 between October 12 and December 29, 2010. The aim of the measurements was to detect water conducting fractures and hydraulic interference between pilot holes ONK-PH16 and ONK-PH17. The flow rate into a 0.5 m long test section was measured using 0.1 m point intervals. The flowing fractures in both pilot holes were obtained between 50 m - 80 m. For hydraulic interference test one drillhole was closed with packers to increase its pressure. Flow response to the increased pressure was measured in the other drillhole. The flow guide of the PFL DIFF probe encloses an electrode for single point resistance measurement, which was carried out with 0.01 m point intervals during the automatic flow measurements. The flow measurement and the single point resistance measurement were used to locate flowing fractures and evaluate their transmissivity. Electrical conductivity (EC) and temperature of water were registered during automatic flow logging. The conductivity values are temperature corrected to 25 deg C. The distance between the drillholes is about 14 m. Flow response in fractures of open ONK-PH16 could be detected when pressure was changed in ONK-PH17. (orig.)

Evaluating hydrochemical data from shallow groundwater in Forsmark from a microbiological perspective

Energy Technology Data Exchange (ETDEWEB)

Hallbeck, Lotta (Microbial Analytics Sweden AB, Goeteborg (Sweden))

2008-03-15

Oxygen is one of the chemical species that can corrode a copper canister in a KBS-3 repository. It is therefore important to determine whether oxygen dissolved in precipitation or groundwater could reach repository depth by groundwater transport. This matter can be determined by gaining an understanding of the oxygen-consuming microbial processes that take place in shallow groundwater in the area of interest. This report evaluates hydrogeochemical data from shallow groundwater in the Forsmark area from a microbiological perspective. Hydrogeochemical data were gathered from soil pipes at depths from 1.6 to 9.6 m and from percussion-drilled boreholes having mid-point depths of between c. 30 and c. 180 m. Only a few of the percussion-drilled boreholes had packers installed. The sampled sections were therefore very long, allowing groundwater from many different depths to mix. Oxygen and oxidation-reduction potential (ORP) were measured in groundwater in soil pipes but not in percussion-drilled boreholes. The poor quality of the oxygen data made it difficult to identify the depth of origin of completely oxygen-free groundwater. Parameters that indicated ongoing anaerobic microbial processes, such as nitrite, ferrous iron, dissolved manganese, and sulphide, were found in many soil pipes. The soil pipes displayed individual chemical profiles in terms of chemical species related to microbial activity. The microbial activity could not be linked to the classes of soil pipe, i.e. recharge, discharge, or intermittent. Existing soil pipes and percussion-drilled boreholes could be used for additional sampling of microbial parameters. Such sampling would benefit from careful hypothesis-driven description of the sampling parameters and experience-guided choice of sampling methods

Numerical simulation supports formation testing planning; Simulacao numerica auxilia planejamento de teste de formacao

Energy Technology Data Exchange (ETDEWEB)

Rodrigues, Rogerio Marques; Fonseca, Carlos Eduardo da [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2008-07-01

A well test is an operation that allows the engineer assessing reservoir performance and fluids properties by measuring flow rates and pressures under a range of flowing conditions. In most well tests, a limited amount of fluid is allowed to flow from the formation being tested. The formation is isolated behind cemented casing and perforated at the formation depth or, in open hole, the formation is straddled by a pair of packers that isolate the formation. During the flow period, the pressure at the formation is monitored over time. Then, the formation is closed (or shut in) and the pressure monitored at the formation while the fluid within the formation equilibrates. The analysis of these pressure changes can provide information on the size and shape of the formation as well as its ability to produce fluids. . The flow of fluid through the column test causes your heating and hence its elongation. Several factors affect the rate of exchange of heat as well and the characteristics of the fluid, the flow of time and the flow and the existence of deep water. The prediction of temperature over well, in its various components, and the effect caused in the column test is not a trivial task. Some authors, for example, describe a method of calculating the behaviour of columns of production, making it simpler variation of constant temperature throughout the entire column, a fact that this does not occur in practice. The work aims at presenting the advantages of using the numerical simulation in determining the efforts and corresponding movements of the column of test of formation. (author)

A new adaptive mesh refinement data structure with an application to detonation

Science.gov (United States)

Ji, Hua; Lien, Fue-Sang; Yee, Eugene

2010-11-01

A new Cell-based Structured Adaptive Mesh Refinement (CSAMR) data structure is developed. In our CSAMR data structure, Cartesian-like indices are used to identify each cell. With these stored indices, the information on the parent, children and neighbors of a given cell can be accessed simply and efficiently. Owing to the usage of these indices, the computer memory required for storage of the proposed AMR data structure is only {5}/{8} word per cell, in contrast to the conventional oct-tree [P. MacNeice, K.M. Olson, C. Mobary, R. deFainchtein, C. Packer, PARAMESH: a parallel adaptive mesh refinement community toolkit, Comput. Phys. Commun. 330 (2000) 126] and the fully threaded tree (FTT) [A.M. Khokhlov, Fully threaded tree algorithms for adaptive mesh fluid dynamics simulations, J. Comput. Phys. 143 (1998) 519] data structures which require, respectively, 19 and 2{3}/{8} words per cell for storage of the connectivity information. Because the connectivity information (e.g., parent, children and neighbors) of a cell in our proposed AMR data structure can be accessed using only the cell indices, a tree structure which was required in previous approaches for the organization of the AMR data is no longer needed for this new data structure. Instead, a much simpler hash table structure is used to maintain the AMR data, with the entry keys in the hash table obtained directly from the explicitly stored cell indices. The proposed AMR data structure simplifies the implementation and parallelization of an AMR code. Two three-dimensional test cases are used to illustrate and evaluate the computational performance of the new CSAMR data structure.

Low-dose computed tomography for the detection of cocaine body packs. Clinical evaluation and legal issues

International Nuclear Information System (INIS)

Pache, G.; Bulla, S.; Baumann, T.; Langer, M.; Blanke, P.

2012-01-01

Purpose: To discuss the juridical basis for CT examinations of cocaine body packers and to evaluate the clinical implementation of a tube current reduction-based low-dose CT protocol. Materials and Methods: A literature search was performed to discuss the legal basis regarding the problem, the procedures, the potential harm and the proportionality. Retrospective evaluation of 8 patients who had undergone a low-dose CT scan (body mass index 2 30 mAs; > 25 kg/m 2 60 mAs) during the time period from February until October 2009 in order to exclude or to assess remaining cocaine body packs was approved by the institutional review board. The detectability and condition of the body packs were analyzed. Effective doses were calculated. Results: German jurisdiction does not distinguish between plain film X-ray and CT examinations. Both plain film X-ray and CT examination require a judicial warrant. However, examination results might still remain valid if a warrant was not requested. In 8 examinations (30 mAs n = 3, 60 mAs n = 5, mean BMI 25.9 ± 3.2.) a total of 34 body packs were correctly identified. The mean density of the body packs was 74.4 ± 31.9 HU (range 17 - 154 HU) with a cocaine content between 22.5 % and 72.8 %. The mean estimated radiation dose was 2.23 ± 0.72 mSv. Conclusion: Although medical legal aspects do not specify the diagnostic procedure to be performed, the high diagnostic accuracy and applied radiation dose reduction could establish low-dose CT as the method of choice for detecting cocaine body packs, thereby potentially avoiding future legal problems. (orig.)

Groundwater sampling and chemical characterisation of the Laxemar deep borehole KLX02

International Nuclear Information System (INIS)

Laaksoharju, M.; Skaarman, C.; Smellie, J.; Nilsson, A.C.

1995-02-01

The Laxemar deep borehole, KLX02 (1705 m depth), located close to the Aespoe Hard Rock Laboratory (HRL), has been investigated. Groundwater sampling was conducted on two occasions and using different methods. The first sampling was taken in the open borehole using the so-called Tube sampler; the second sampling carried out using the SKB-packer equipment to isolate pre-determined borehole sections. Groundwater compositions consist of two distinct groupings; one shallow to intermediate Sodium-Bicarbonate type (Na(Ca,K):HC 3 Cl(SO 4 )) to a depth of 1000 m, and the other of deep origin, a calcium-chloride type (Ca-Na(K):Cl-SO 4 (Br)), occurring below 1000 m. The deep brines contain up to 46000 mg of Cl per litre. The influence of borehole activities are seen in the tritium data which record significant tritium down to 1000 m, and even to 1420 m. Mixing modelling shows that water from the 1960's is the main source for this tritium. The high tritium values in the 1090-1096.2 m section are due to contamination of 1% shallow water from 1960 and 2% of modern shallow water. The upper 800 m of bedrock at Laxemar lies within a groundwater recharge area; the sub-vertical to moderate angled fracture zones facilitate groundwater circulation to considerable depths, at least to 800 m, thus accounting for some of the low saline brackish groundwaters in these conducting fracture zones. Below 1000 m the system is hydraulically and geochemically 'closed' such that highly saline brines exist in a near-stagnant environment. 30 refs, 22 figs, 8 tabs

An update of hydrologic conditions and distribution of selected constituents in water, Snake River Plain aquifer and perched groundwater zones, Idaho National Laboratory, Idaho, emphasis 2006-08

Science.gov (United States)

Davis, Linda C.

2010-01-01

or October 2008, reportable concentrations of tritium in groundwater ranged from 810 ? 70 to 8,570 ? 190 picocuries per liter (pCi/L), and the tritium plume extended south-southwestward in the general direction of groundwater flow. Tritium concentrations in water from wells completed in shallow perched groundwater at the ATRC were less than the reporting levels. Tritium concentrations in deep perched groundwater exceeded the reporting level in 11 wells during at least one sampling event during 2006-08 at the ATRC. Tritium concentrations from one or more zones in each well were reportable in water samples collected at various depths in six wells equipped with multi-level WestbayTM packer sampling systems. Concentrations of strontium-90 in water from 24 of 52 aquifer wells sampled during April or October 2008 exceeded the reporting level. Concentrations ranged from 2.2 ? 0.7 to 32.7 ? 1.2 pCi/L. Strontium-90 has not been detected within the eastern Snake River Plain aquifer beneath the ATRC partly because of the exclusive use of waste-disposal ponds and lined evaporation ponds rather than using the disposal well for radioactive-wastewater disposal at ATRC. At the ATRC, the strontium-90 concentration in water from one well completed in shallow perched groundwater was less than the reporting level. During at least one sampling event during 2006-08, concentrations of strontium-90 in water from nine wells completed in deep perched groundwater at the ATRC were greater than reporting levels. Concentrations ranged from 2.1?0.7 to 70.5?1.8 pCi/L. At the Idaho Nuclear Technology and Engineering Center (INTEC), the reporting level was exceeded in water from two wells completed in deep perched groundwater. During 2006-08, concentrations of cesium-137, plutonium-238, and plutonium-239, -240 (undivided), and americium-241 were less than the reporting level in water samples from all wells and all zones in wells equipped with multi-level WestbayTM packer sampling systems

Cross-well slug testing in unconfined aquifers: A case study from the Sleepers River Watershed, Vermont

Science.gov (United States)

Belitz, K.; Dripps, W.

1999-01-01

Normally, slug test measurements are limited to the well in which the water level is perturbed. Consequently, it is often difficult to obtain reliable estimates of hydraulic properties, particularly if the aquifer is anisotropic or if there is a wellbore skin. In this investigation, we use partially penetrating stress and observation wells to evaluate specific storage, radial hydraulic conductivity and anisotropy of the aquifer, and the hydraulic conductivity of the borehole skin. The study site is located in the W9 subbasin of the Sleepers River Research Watershed, Vermont. At the site, ~3 m of saturated till are partially penetrated by a stress well located in the center of the unconfined aquifer and six observation wells located above, below, and at the depth of the stress well at radial distances of 1.2 and 2.4 m. The observation wells were shut in with inflatable packers. The semianalytical solution of Butler (1995) was used to conduct a sensitivity analysis and to interpret slug test results. The sensitivity analysis indicates that the response of the stress well is primarily sensitive to radial hydraulic conductivity, less sensitive to anisotropy and the conductivity of the borehole skin, and nearly insensitive to specific storage. In contrast, the responses of the observation wells are sensitive to all four parameters. Interpretation of the field data was facilitated by generating type curves in a manner analogous to the method of Cooper et al. (1967). Because the value of radial hydraulic conductivity is obtained from a match point, the number of unknowns is reduced to three. The estimated values of radial hydraulic conductivity and specific storage are comparable to those derived from the methods of Bouwer and Rice (1976) and Cooper et al. (1967). The values and skin conductivity, however, could not have been obtained without the use of observation wells.Normally, slug test measurements are limited to the well in which the water level is perturbed

Hydraulic fracture monitoring in hard rock at 410 m depth with an advanced fluid-injection protocol and extensive sensor array

Science.gov (United States)

Zang, Arno; Stephansson, Ove; Stenberg, Leif; Plenkers, Katrin; Specht, Sebastian; Milkereit, Claus; Schill, Eva; Kwiatek, Grzegorz; Dresen, Georg; Zimmermann, Günter; Dahm, Torsten; Weber, Michael

2017-02-01

In this paper, an underground experiment at the Äspö Hard Rock Laboratory (HRL) is described. Main goal is optimizing geothermal heat exchange in crystalline rock mass at depth by multistage hydraulic fracturing with minimal impact on the environment, that is, seismic events. For this, three arrays with acoustic emission, microseismicity and electromagnetic sensors are installed mapping hydraulic fracture initiation and growth. Fractures are driven by three different water injection schemes (continuous, progressive and pulse pressurization). After a brief review of hydraulic fracture operations in crystalline rock mass at mine scale, the site geology and the stress conditions at Äspö HRL are described. Then, the continuous, single-flow rate and alternative, multiple-flow rate fracture breakdown tests in a horizontal borehole at depth level 410 m are described together with the monitoring networks and sensitivity. Monitoring results include the primary catalogue of acoustic emission hypocentres obtained from four hydraulic fractures with the in situ trigger and localizing network. The continuous versus alternative water injection schemes are discussed in terms of the fracture breakdown pressure, the fracture pattern from impression packer result and the monitoring at the arrays. An example of multistage hydraulic fracturing with several phases of opening and closing of fracture walls is evaluated using data from acoustic emissions, seismic broad-band recordings and electromagnetic signal response. Based on our limited amount of in situ tests (six) and evaluation of three tests in Ävrö granodiorite, in the multiple-flow rate test with progressively increasing target pressure, the acoustic emission activity starts at a later stage in the fracturing process compared to the conventional fracturing case with continuous water injection. In tendency, also the total number and magnitude of acoustic events are found to be smaller in the progressive treatment with

Aeration to degas CO{sub 2}, increase pH, and increase iron oxidation rates for efficient treatment of net alkaline mine drainage

Energy Technology Data Exchange (ETDEWEB)

Kirby, C.S.; Dennis, A.; Kahler, A. [Bucknell University, Lewisburg, PA (United States). Dept. of Geology

2009-07-15

Passive treatment systems for mine drainage use no energy other than gravity, but they require greater area than active treatment systems. Researchers are considering 'hybrid' systems that have passive and active components for increased efficiency, especially where space limitations render passive-only technology ineffective. Flow-through reactor field experiments were conducted at two large net-alkaline anthracite mine discharges in central Pennsylvania. Assuming an Fe removal rate of 20 g m{sup -2} day{sup -1} and Fe loading from field data, 3.6 x 10{sup 3} and 3.0 x 10{sup 4} m{sup 2} oxidation ponds would be required for the passive treatment of Site 21 and Packer 5 discharges, respectively. However, only a small area is available at each site. This paper demonstrates aeration to drive off CO{sub 2}, increase pH, and increase Fe(II) oxidation rates, enabling treatment within a small area compared to passive treatment methods, and introduces a geochemical model to accurately predict these rates as well as semi-passive treatment system sizing parameters. Iron(II) oxidation modeling of actively aerated systems predicted that a 1-m deep pond with 10 times less area than estimated for passive treatment would lower Fe(II) concentrations to less than 1 mg L-1 at summer and winter temperatures for both sites. The use of active aeration for treatment Of CO{sub 2}-rich, net-alkaline discharges (including partially treated effluent from anoxic limestone drains) can result in considerably reduced treatment area for oxidation and may lower treatment costs, but settling of Fe hydroxides was not considered in this study. The reduced capital cost for earthmoving will need to be compared to energy and maintenance costs for aeration.

Characterization of deep-seated rock masses by means of borehole investigation

International Nuclear Information System (INIS)

1982-04-01

Swedish State Power Board. The main objective of the programme was to test a method of measuring in-situ rock stresses in the deep, water-filled boreholes and to correlate measured rock stresses with the hydraulic and geological properties of the rock mass. The investigations consist of the following activities: - Coredrillin of two main boreholes with a depth of 500 m and 250 m respectively. - Rock stress measurements at 11 and 9 main levels in the boreholes respectively. At each level at least 3 complete measurements were made. - Logging of the cores with respect to rock type, fractures and fracture characteristics. - Water injection tests in the boreholes. The rock mass investigated is composed of a gneiss granite of Svecocarelian age (1500 Ma), with inclusions of younger pegmatites and greenstones of variable ages. The fracture density is as a mean 2 fractures per meter with a marked decrease in frequency with increased depth. The fractures are generally coated with calcite and chlorite as the dominating coating minerals. For the rock stress measurements, the method of Leeman and Hayes was chosen. The result show that there is a very high stress level in the rock mass, recordings of about 70 MPa were taken below a horizontal fracture zone at 320 m depth. In this lower rock masses the high stresses were also illustrated by intense disking of the hollow core which made measurements impossible in large sections of the boreholes. Water injection tests were performed, mainly as double-packer tests alon the entire boreholes. For the evaluation, both stationary and transient calculation theories were used and the results show a good agreement. The hyddraulic conductivities of the rock mass vary from below 10 -10 m/s up to 10 -7 m/s. The conductivity decreases with depth, though there are zones even at great depth with high conductivity. (Author)

Preparatory hydrogeologic investigations for in situ migration experiments in Studsvik

International Nuclear Information System (INIS)

Klockars, C.-E.; Persson, O.; Carlsson, L.; Duran, O.; Lindstroem, D.; Magnusson, K.-Aa.; Scherman, S.

1980-11-01

The test area is located at Studsvik and covers an area of 8000 m 2 . Within the area, the Geological Survey of Sweden has carried out studies including:Geological and tectonic mapping of the bedrock. Geophysical studies from the ground surface, including refraction seismic measurements, resistivity measurements and electromagnetic measurements. Core drilling. Hammer drilling. Geophysical and geochemical borehole measurements. Hydraulic tests in and between different boreholes. The geological mapping shows that the test area is located within a bedrock consisting of metamorphic sedimentary gneisses, known as migmatite within which decimeter-to-meter-thick layers of amphibolite are present. Mapped fractures from the drill core have chiefly chlorite and calcite as fracture-filling materials. The fracture frequency is relatively high with a maximum in the strike direction of the fractures in a northwesterly direction. The resistivity loggings that have been carried out show that the bedrock has a low average resistivity of 24 000 ohm m. The seismic measurements also show a low-velocity zone within the central portion of the area, which indicates that the portion of the bedrock close to the ground surface has a relatively high fracture content. In the measurements of spontaneous potential (SP), pyrite-filled fractures in the core borehole gave electronegative deviations. The borehole liquid has low salinity (high resistivity), a low pH and a positive redox potential. The hydraulic measurements that have been carried out show that the bedrock possesses low conductivity, in the order of 10 -6 m/s. Hydraulic double packer measurements indicate a number of major transmissive sections along the length of the boreholes. Inter-hole measurements show that only a few of these transmissive sections have hydraulic connection with nearby boreholes. Measurements of radon content and the resistivity of the borehole liquid provide information on a borehole's dominant zones with

Field assessment of the use of borehole pressure transients to measure the permeability of fractured rock masses

International Nuclear Information System (INIS)

Forster, C.B.; Gale, J.E.

1981-06-01

A field experiment to evaluate the transient pressure pulse technique as a method of determining the in-situ hydraulic conductivity of low permeability fractured rock was made. The experiment attempted to define: the radius of influence of a pressure pulse-test in fractured rock and the correlation between pressure-pulse tests and steady-state flow tests performed in five boreholes drilled in fractured granite. Twenty-five test intervals, 2 to 3 m in length, were isolated in the boreholes, using air-inflated packers. During pressure pulse and steady-state tests, pressures were monitored in both the test and observation cavities. Rock-mass conductivities were calculated from steady-state test results and were found to range from less than 10 - 11 to 10 - 7 cm/sec. However, there was no consistent correlation between the steady-state conductivity and the pressure pulse decay characteristics of individual intervals. These conflicting test results can be attributed to the following factors: differences in volumes of rock affected by the test techniques; effects of equipment configuration and compliance; and complexity of the fracture network. Although the steady-state flow tests indicate that hydraulic connections exist between most of the test cavities, no pressure responses were noted in the observation cavities (located at least 0.3 m from the test cavities) during the pulse tests. This does not mean, however, that the pressure-pulse radius of influence is <0.3 m, because the observation cavities were too large (about 7 liters). The lack of correlation between steady-state conductivities and the corresponding pressure pulse decay times does not permit use of existing single-fracture type curves to analyze pulse tests performed in multiple-fracture intervals. Subsequent work should focus on the detailed interpretation of field results with particular reference to the effects of the fracture system at the test site

Tropical Fruit Irradiation-From Research to Commercial Application

International Nuclear Information System (INIS)

Moy, James H.

2005-09-01

Food irradiation is an emerging technology for the 21st century. Extensive research and development worldwide in the past 40 years have proved the versatility and efficacy. With low, medium to high dose, and using either a gamma, electrons, or x-ray source, radiation can: 1) disinfest plant products and spices; 2) extend shelf life of tubers, bulbs, and selected tropical fruits; 3) decontaminate meats and seafood; 4) sterilize spices and special meals; and 5) improve product utilization. Criteria for testing its efficacy include effectiveness, efficiency, and the ability to retain product quality. The use of irradiation as a quarantine treatment of tropical fruits is potentially attractive to countries growing these fruits. A two-prong research plan should aim at proving radiation's effectiveness in preventing emergence of all insect pests that might be on a fruit, and determining that all quality attributes of a host fruit are retained after irradiation, subsequent storage and shipment. ommercial application involves conducting an economical feasibility study; market research and testing; selection of radiation source and irradiator type; training of personnel for plant operations, radiation safety and dosimetry monitoring; designing of packages and choosing the most cost-effective means of transporting treated fruits to market destinations. When all of hese are achieved, it should lead to a continuous and profitable operation. Researchers at the University of Hawaii using a gamma irradiator from the mid-1960s to early 2000s had amassed a volume of data to prove the efficacy of radiation disinfestations. And installation of a commercial x-ray irradiator in 2000 on the Island of Hawaii has enabled fruit farmers and packers to use this technology for exporting tropical fruits to distant markets

Steeply Inclined Coal Floor Impermeability Probing in Mining under Safe Water Pressure of Aqui fer%带压开采条件下急倾斜煤层底板隔水性能探查研究

Institute of Scientific and Technical Information of China (English)

杜占良

2016-01-01

急倾斜煤层带压开采较水平及缓倾斜煤层存在的突水潜在威胁较大。为了有效防范底板突水情况的发生，昌华煤矿在带压开采急倾斜5号煤层时，于井下布置了三个钻孔，采用了钻孔“三量”观测、压水试验和岩石力学测试等方法，对煤层底板隔水层进行了探查。探查成果表明：5号煤层底板至奥灰顶界隔水层隔水性能较好，厚度适中，且奥灰顶面下约50 m亦可作为相对隔水层，对防护开采5号煤层突水危险较为有利。%Comparing with horizontal and gently inclined coal seams, the water bursting potential threat is larger during steeply inclined coal seam mining under safe water pressure of aquifer. To effectively prevent floor water bursting, during the steeply inclined coal seam No.5 mining under safe water pressure in the Changhua coalmine has laid out 3 boreholes underground, using“3 items”observation, packer permeability test and rock mechanical test carried out coal floor aquifuge exploring. The result has shown that the impermeabili⁃ty of aquifuge between coal seam No.5 floor to top of Ordovician limestone is rather good with moderate thickness. Besides, 50m below Ordovician limestone top can be a relative aquifuge propitious to prevent water bursting hazard during the mining of coal seam No. 5.

Do gray wolves (Canis lupus) support pack mates during aggressive inter-pack interactions?

Science.gov (United States)

Cassidy, Kira A; McIntyre, Richard T

2016-09-01

For group-living mammals, social coordination increases success in everything from hunting and foraging (Crofoot and Wrangham in Mind the Gap, Springer, Berlin, 2010; Bailey et al. in Behav Ecol Sociobiol 67:1-17, 2013) to agonism (Mosser and Packer in Anim Behav 78:359-370, 2009; Wilson et al. in Anim Behav 83:277-291, 2012; Cassidy et al. in Behav Ecol 26:1352-1360, 2015). Cooperation is found in many species and, due to its low costs, likely is a determining factor in the evolution of living in social groups (Smith in Anim Behav 92:291-304, 2014). Beyond cooperation, many mammals perform costly behaviors for the benefit of group mates (e.g., parental care, food sharing, grooming). Altruism is considered the most extreme case of cooperation where the altruist increases the fitness of the recipient while decreasing its own fitness (Bell in Selection: the mechanism of evolution. Oxford University Press, Oxford 2008). Gray wolf life history requires intra-pack familiarity, communication, and cooperation in order to succeed in hunting (MacNulty et al. in Behav Ecol doi: 10.1093/beheco/arr159 2011) and protecting group resources (Stahler et al. in J Anim Ecol 82: 222-234, 2013; Cassidy et al. in Behav Ecol 26:1352-1360, 2015). Here, we report 121 territorial aggressive inter-pack interactions in Yellowstone National Park between 1 April 1995 and 1 April 2011 (>5300 days of observation) and examine each interaction where one wolf interferes when its pack mate is being attacked by a rival group. This behavior was recorded six times (17.6 % of interactions involving an attack) and often occurred between dyads of closely related individuals. We discuss this behavior as it relates to the evolution of cooperation, sociality, and altruism.

Increased oil production and reserves from improved completion techniques in the Bluebell Field, Uinta Basin, Utah. Annual report, October 1, 1996--September 30, 1997

Energy Technology Data Exchange (ETDEWEB)

Deo, M.D.; Morgan, C.D.

1998-05-01

Wells in the Bluebell field are typically completed by perforating 40 or more beds over 1,000 to 3,000 vertical ft, them stimulating the entire interval with hydrochloric acid. This technique is often referred to as the shot gun completion. The shot-gun technique is believed to leave many potentially productive beds damaged and/or untreated, while allowing water-bearing and low-pressure (thief) zones to communicate with the wellbore. A two-year characterization study involved detailed examination of outcrop, core, well logs, surface and subsurface fractures, produced oil-field waters, engineering parameters of the two demonstration wells, and analysis of past completion techniques and effectiveness. The study was intended to improve the geologic characterization of the producing formations and thereby develop completion techniques specific to the producing beds or facies instead of a shot gun approach to stimulating all the beds. The characterization did not identify predictable-facies or predictable-fracture trends within the vertical stratigraphic column as originally hoped. Advanced logging techniques can identify productive beds in individual wells. A field-demonstration program was developed to use cased-hole advanced logging techniques in two wells and recompletion the wells at two different scales based on the logging. The first well was going to be completed at the interval scale using a multiple stage completion technique (about 500 ft per stage). The second well will be recompleted at the bed-scale using bridge plug and packer to isolate three or more beds for stimulation. These recompletion will show which logs are most effective in identifying productive beds and what scale of completion is most cost effective. The third demonstration will be the logging and completion of a new well using the logs and completion scale or technique most effective in the previous demonstrations.

Evaluating hydrochemical data from shallow groundwater in Laxemar from a microbiological perspective

Energy Technology Data Exchange (ETDEWEB)

Hallbeck, Lotta (Microbial Analytics Sweden AB, Goeteborg (Sweden))

2008-01-15

Oxygen is one of the chemical species that can corrode a copper canister in a KBS-3 repository. It is therefore important to determine whether oxygen dissolved in precipitation or groundwater could reach repository depth by means of groundwater transport. This can be determined by gaining an understanding of the oxygen-consuming microbial processes that take place in shallow groundwater in the area of interest. This report evaluates hydrogeochemical data from shallow groundwater in the Laxemar area from a microbiological perspective. Hydrogeochemical data were gathered from soil pipes at depths from 1.6 to 16.5 m and from percussion-drilled boreholes having mid-point depths of between 28.5 and 131 m. Only a few of the percussion-drilled boreholes had packers installed; the sampled sections were therefore very extended, allowing groundwaters from many different depths to mix. Oxygen and oxygen reduction potential (ORP) were not measured in groundwater from soil pipes or percussion drilled boreholes. The report therefore focuses on parameters that indicated ongoing anaerobic microbial processes, such as nitrite, ferrous iron, dissolved manganese, and sulphide, that were found in many soil pipes. Even though many of the soil pipes were located in similar environments and at relatively similar depths, ranging from 3.5 to 6 m, they displayed individual chemical profiles in terms of chemical species related to microbial activity. The microbial activity could not be linked to the classes of soil pipe, i.e. recharge, discharge, or intermittent. Existing soil pipes and percussion-drilled boreholes could be used for additional sampling to measure microbial parameters. Such sampling would benefit from the careful hypothesis-driven description of the sampling parameters and experience-guided choice of sampling methods

Investigation of Pre- and Post-Swelling Behavior of Elastomeric Material

Directory of Open Access Journals (Sweden)

M Akhtar

2013-06-01

Full Text Available In the last ten years, a new type of modern polymer, known as swelling elastomer, has been used extensively as a sealing element in the oil and gas industry. These elastomers have been instrumental in various new applications such as water shut off, zonal isolation, and sidetracking. Though swell packers can significantly reduce costs and increase productivity, their failure can lead to serious losses. The integrity and reliability of swelling elastomer seals under different field conditions is a major concern. The investigation of changes in material behavior over a specified swelling period is a necessary first step for performance evaluation of elastomer seals. The current study is based on experimental analysis of changes in geometric and mechanical behavior (hardness, tensile, compressive, bulk of an elastomeric material due to swelling. Tests were carried out before and after various stages of swelling. Specimens were placed in saline water (0.6% and 12% concentrations at a temperature of 50°C, with the total swelling period being one month. Swelling, hardness, compression, and bulk tests were conducted using disc samples, while ring samples were used for tensile experiments. A small test rig was designed and constructed for determination of bulk modulus. Stress-strain curves under tension and compression, and pressure volumetric-strain curves were obtained for specimens subjected to different swelling periods. Due to the fast-swell nature of the elastomer, there were sharp changes in mechanical properties within the first few days of swelling for both salinities. Elastic modulus derived from tensile and compressive tests showed a 90% decrease in the first few days. Bulk modulus showed fluctuation in its variation with an increasing swelling period. There was a small effect of salinity only during the first 5 or 6 days.

Lossy transmission line model of hydrofractured well dynamics

Energy Technology Data Exchange (ETDEWEB)

Patzek, T.W. [Department of Materials Science and Mineral Engineering, University of California at Berkeley, Berkeley, CA (United States); De, A. [Earth Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA (United States)

2000-01-01

The real-time detection of hydrofracture growth is crucial to the successful operation of water, CO{sub 2} or steam injection wells in low-permeability reservoirs and to the prevention of subsidence and well failure. In this paper, we describe propagation of very low frequency (1-10 to 100 Hz) Stoneley waves in a fluid-filled wellbore and their interactions with the fundamental wave mode in a vertical hydrofracture. We demonstrate that Stoneley-wave loses energy to the fracture and the energy transfer from the wellbore to the fracture opening is most efficient in soft rocks. We conclude that placing the wave source and receivers beneath the injection packer provides the most efficient means of hydrofracture monitoring. We then present the lossy transmission line model of wellbore and fracture for the detection and characterization of fracture state and volume. We show that this model captures the wellbore and fracture geometry, the physical properties of injected fluid and the wellbore-fracture system dynamics. The model is then compared with experimentally measured well responses. The simulated responses are in good agreement with published experimental data from several water injection wells with depths ranging from 1000 ft to 9000 ft. Hence, we conclude that the transmission line model of water injectors adequately captures wellbore and fracture dynamics. Using an extensive data set for the South Belridge Diatomite waterfloods, we demonstrate that even for very shallow wells the fracture size and state can be adequately recognized at wellhead. Finally, we simulate the effects of hydrofracture extension on the transient response to a pulse signal generated at wellhead. We show that hydrofracture extensions can indeed be detected by monitoring the wellhead pressure at sufficiently low frequencies.

Monitoring of microbial hazards at farms, slaughterhouses, and processing lines of swine in Korea.

Science.gov (United States)

Rho, M J; Chung, M S; Lee, J H; Park, J

2001-09-01

This study was executed to investigate microbiological hazards at swine farms, slaughterhouses, dressing operations, and local markets for the application of the hazard analysis critical control point system in Korea by analyzing total aerobic plate count (APC) and presence of pathogens. Six integrated pig farms and meat packers were selected from six different provinces, and samples were collected from pig carcasses by swabbing and excision methods at the slaughterhouses, processing rooms, and local markets, respectively. APCs of water in water tanks were relatively low, 1.9 to 3.1 log10 CFU/ml; however, they were increased to 4.6 to 6.9 log10 CFU/ml when sampled from water nipples in the pigpen. APCs of feeds in the feed bins and in the pigpens were 4.4 to 5.4 and 5.2 to 6.7 log10 CFU/g, respectively. Salmonella spp., Staphylococcus aureus, and Clostridium perfringens were detected from water and feed sampled in pigpens and pigpen floors. S. aureus was the most frequently detected pathogenic bacteria in slaughterhouses and processing rooms. Listeria monocytogenes and Yersinia enterocolitica were also detected from the processing rooms of the Kyonggi, Kyongsang, and Cheju provinces. Even though APCs were maintained at the low level of 3.0 log10 CFU/g during slaughtering and processing steps, those of final pork products produced by the same companies showed relatively high numbers when purchased from the local market. These results indicated that the cold chain system for transporting and merchandising of pork products was deficient in Korea. Water supply and feed bins in swine farms and individual operations can be identified as critical control points to reduce microbiological hazards in swine farms, slaughterhouses, and processing plants.

Swine production.

Science.gov (United States)

Plain, Ronald L; Lawrence, John D

2003-07-01

The US swine industry is large and growing. The quantity of pork desired by consumers of US pork is growing at the rate of 1.5%/y. New production systems and new technology have enabled production per sow to grow at a rate of 4% annually in recent years. Consequently, the number of sows in the United States is declining. Because productivity growth is outpacing demand growth, the deflated price of hogs and pork is declining. Hog production and prices continue to exhibit strong seasonal and cyclic patterns. Pork production is usually lowest in the summer and highest in the fall. Production and prices tend to follow 4-year patterns. The US swine industry continues to evolve toward fewer and larger producers who rely on contracts for both hog production and marketing. In 2000, over half of the hogs marketed were from approximately 156 firms marketing more than 50,000 head annually. These producers finished 60% of their production in contract facilities. Over 90% of their marketings were under contract or were owned by a packer. These producers expressed a high level of satisfaction with hog production. Both they and their contract growers were satisfied with production contracts. These large producers were satisfied with their marketing contracts and planned to continue them in the future. The hog industry has changed a great deal in the last decade. There is little reason to believe this rapid rate of change will not continue. This swine industry is highly competitive and profit driven. Profit margins are too small to allow producers the luxury of ignoring new technology and innovative production systems. Consequently, hog production will continue its rapid evolution from traditional agriculture to typical industry.

Inflow measurements on the D-holes at the Stripa mine

International Nuclear Information System (INIS)

Danielson, J.; Ekman, L.; Joensson, S.

1991-06-01

Flow measurements in 0.5 m-sections in the D-boreholes at Stripa were performed by Swedish Geological Company during February to April 1991. The purpose of the measurements was to determine in detail the inflow to an array of boreholes through an undisturbed volume of fractured granite. A lower measurement limit of 1x10 -4 l/min was stipulated for the measurements in 0.5 m-sections. However, in practice the inflow measurements were initially performed in 4.5 m-sections, which made it possible to reach an even lower measurement limit. Furthermore, by this method the tests were speeded up, because in all 4.5 m-sections where the flow fell below 1x10 -4 l/min, no detailed measurements in 0.5 m-sections were necessary. The accuracy of the measurements was 5% for flow in the interval greater than or equal to 1x10 -3 l/min and 100% for flow below that value. The boreholes D5 and D6 have relatively high inflows to the entire boreholes, about 450x10 -3 l/min respectively 90x10 -3 l/min. The inflow values to the remaining boreholes are much lower: between about 3x10 -3 and 13x10 -3 l/min. The flow distribution along the boreholes is rather similar in boreholes D1, D3 and D6, with flow maxima at about 80-90 m borehole length. At this level peaks are found also in boreholes D2, D4 and D5, but in the latter boreholes increased flow values occur also closer to the borehole outlets. Indications of hydraulic connections between different boreholes were observed. Inflation of the packers at certain locations in one borehole caused in some cases flow changes in neighbouring boreholes. (au)

Field study of macrodispersion in a heterogeneous aquifer. 2

International Nuclear Information System (INIS)

Boggs, J.M.; Rehfeldt, K.R.

1990-01-01

Observations of the spatial variability of the hydraulic conductivity field at the site of a large-scale natural gradient tracer experiment located at Columbus Air Force Base in Mississippi are presented. Direct measurements of hydraulic conductivity of the heterogeneous alluvial aquifer at the site were made using a variety of methods including aquifer tests, borehole flowmeter logging, double-packer tests, slug tests, and a newly developed laboratory permeameter to test undisturbed soil cores. The borehole flowmeter method was shown to be the most effective method for measuring conductivity variability. Estimates of the log hydraulic conductivity variance (σ 2 lnL ) and the horizontal and vertical correlation sales, (λ h and λ v ) of 4.5, 12 m, and 1.5 m, respectively, were calculated assuming second order stationarity of the conductivity field. Large-scale spatial variations in the mean groundwater velocity indicated by the natural gradient tracer experiment, which were shown to be a direct result of contrasts in the mean hydraulic conductivity along the plume pathway, strongly suggested the presence of a conductivity trend. The measured hydraulic conductivity data were subsequently detrended using least-squares regression to remove three-dimensional polynomials. The third-order polynomial was judged the best representation of the conductivity drift based on its overall compatibility with the groundwater flow field inferred from the tracer plume observations. Significantly lower estimates for σ 2 lnK , λ h , and λ v of 2.8, 5.3 m, and 0.7 m, respectively, were obtained from the third-order log conductivity residuals. The experience with the borehole flowmeter technique shows the feasibility of observing the statistical parameters of the hydraulic conductivity variability required for stochastic models of macrodispersion. (Author) (20 refs., 3 figs., 10 tabs.)

Occupation and mesothelioma in Sweden: updated incidence in men and women in the 27 years after the asbestos ban

Directory of Open Access Journals (Sweden)

Nils Plato

2016-09-01

Full Text Available OBJECTIVES We updated the Swedish component of the Nordic Occupational Cancer (NOCCA Study through 2009 in order to investigate the incidence of mesothelioma of the peritoneum and pleura in both genders, and explored occupational exposures that may be associated with mesothelioma. METHODS The Swedish component of the NOCCA Study includes 6.78 million individuals. Data from this cohort were linked to the population-based Swedish Cancer Registry and Swedish Total Population Registry for three periods between 1961 and 2009, and then further linked to the Swedish NOCCA job-exposure matrix, which includes 25 carcinogenic substances and the corresponding exposure levels for 280 occupations. Multivariate analysis was used to calculate standardized incidence ratios (SIRs for mesothelioma of the peritoneum and pleura by gender, occupational category, carcinogenic substance, and for multiple occupational exposures simultaneously. RESULTS A total of 3,716 incident mesotheliomas were recorded (21.1% in women. We found a significantly increased risk of mesothelioma in 24 occupations, as well as clear differences between the genders. Among men, increased risks of mesothelioma of the pleura were observed in male-dominated occupations, with the greatest elevation of risk among plumbers (SIR, 4.99; 95% confidence interval, 4.20 to 5.90. Among women, increased risks were observed in sewing workers, canning workers, packers, cleaners, and postal workers. In multivariate analysis controlling for multiple occupational exposures, significant associations were only observed between asbestos exposure and mesothelioma. CONCLUSIONS Asbestos exposure was associated with mesothelioma incidence in our study. The asbestos ban of 1982 has yet to show any clear effect on the occurrence of mesothelioma in this cohort. Among women, the occupations of canning workers and cleaners showed increased risks of mesothelioma of the pleura without evidence of asbestos exposure.

Aespoe Hard Rock Laboratory. Backfill and Plug test. Hydraulic testing of core drilled boreholes in the ZEDEX drift

Energy Technology Data Exchange (ETDEWEB)

Ludvigson, Jan-Erik; Nordqvist, Rune; Ekman, Lennart; Hansson, Kent (GEOSIGMA AB, Uppsala (Sweden))

2009-07-01

The present report documents the performance and results of hydraulic testing in selected core boreholes in the Zedex drift. The holes will be used as rock instrumentation boreholes during the Backfill and Plug Test at Aespoe HRL. The testing involves both 1 m long boreholes with 56 mm diameter as well as longer boreholes c. 5 m, 8 m and 25 m long with 56 mm or 76 mm diameter. Only single-hole tests were performed. The tests were carried out as short-time constant head injection tests since all boreholes tested (except one) were non-flowing before tests. The injection phase was followed by a pressure recovery phase. Furthermore, the tests were carried out as single-packer tests. A specially designed test system was used for the tests. The main evaluation of the tests was performed on data from the recovery phase by a new approach based on a non-linear regression technique combined with a flow simulation model (SUTRA). The tests in the 1 m-holes (testing the interval c. 0.3-0.7 m in the rock perpendicular to the tunnel face) show that the hydraulic conductivity of the superficial rock around the Zedex drift in general is low. However, during testing in some boreholes, visible leakage in the rock occurred through superficial fractures into the tunnel. These fractures were mainly located in the floor of the Zedex drift and are probably blast-induced. These fractures have a high hydraulic conductivity. The tests in the longer boreholes show that the hydraulic conductivity further into the rock in general is below c. 1x10-10 m/s. Increased hydraulic conductivity (c.1.5x10-8 m/s) was only observed in the flowing borehole KXZSD8HL.

Evaluating hydrochemical data from shallow groundwater in Laxemar from a microbiological perspective

International Nuclear Information System (INIS)

Hallbeck, Lotta

2008-01-01

Oxygen is one of the chemical species that can corrode a copper canister in a KBS-3 repository. It is therefore important to determine whether oxygen dissolved in precipitation or groundwater could reach repository depth by means of groundwater transport. This can be determined by gaining an understanding of the oxygen-consuming microbial processes that take place in shallow groundwater in the area of interest. This report evaluates hydrogeochemical data from shallow groundwater in the Laxemar area from a microbiological perspective. Hydrogeochemical data were gathered from soil pipes at depths from 1.6 to 16.5 m and from percussion-drilled boreholes having mid-point depths of between 28.5 and 131 m. Only a few of the percussion-drilled boreholes had packers installed; the sampled sections were therefore very extended, allowing groundwaters from many different depths to mix. Oxygen and oxygen reduction potential (ORP) were not measured in groundwater from soil pipes or percussion drilled boreholes. The report therefore focuses on parameters that indicated ongoing anaerobic microbial processes, such as nitrite, ferrous iron, dissolved manganese, and sulphide, that were found in many soil pipes. Even though many of the soil pipes were located in similar environments and at relatively similar depths, ranging from 3.5 to 6 m, they displayed individual chemical profiles in terms of chemical species related to microbial activity. The microbial activity could not be linked to the classes of soil pipe, i.e. recharge, discharge, or intermittent. Existing soil pipes and percussion-drilled boreholes could be used for additional sampling to measure microbial parameters. Such sampling would benefit from the careful hypothesis-driven description of the sampling parameters and experience-guided choice of sampling methods

A global survey of clinicians' awareness, accessibility, utilization of e-continuous education, and quality of clinical blood use: policy considerations

Directory of Open Access Journals (Sweden)

Smit Sibinga CT

2017-07-01

Full Text Available Cees Th Smit Sibinga,1 Maruff A Oladejo,2 Olamide Hakeem Adejumo,3 Quentin Eichbaum,4 Midori Kumagawa,5 Shuichi Kino,5 Sima Zolfaghari,6 Silvano Wendel,7 Gordana Rasovic,8 Namjil Erdenebayar,9 Maya Makhmudova,10 Loyiso Mpuntsha,11 Charlotte Ingram,11 Bakyt B Kharabaev,12 Isaac Kajja,13 Zainab Mukhtar Hussain Sanji,14 Maria M M Satti15 1IQM Consulting for International Development of Quality Management in Transfusion Medicine, University of Groningen, Groningen, the Netherlands; 2Department of Educational Management, University of Lagos, Lagos, 3Olabisi Onabanjo University Teaching Hospital, Sagamu, Nigeria; 4Department of Pathology, Microbiology and Immunology, Vanderbilt University Medical Center, Nashville, TN, USA; 5Japanese Red Cross Hokkaido Block Blood Center, Japan; 6IBTO, Tehran, Iran; 7Blood Bank, Hospital Sirio Libanês, Sao Paulo, Brazil; 8Montenegro National Blood Transfusion Center, Podgorica, Montenegro; 9National Center for Transfusion Medicine, Ulaanbaatar, Mongolia; 10Consultant IQM Consulting, Tashkent, Uzbekistan; 11South Africa National Blood Transfusion Service, Johannesburg, South Africa; 12National Blood Transfusion Service, Bishkek, Kyrgyzstan; 13Department of Orthopedics, Mulago Hospital, Makerere University, Uganda; 14Consultant, Dow University of Health Sciences, Karachi, Pakistan; 15National Blood Transfusion Service, Khartoum, Sudan Introduction: Clinical use of blood has shown the least developed part in the vein-to-vein transfusion chain. This global study was carried out in order to investigate the level of awareness, accessibility and utilization of continuous e-learning and education, and quality of blood use among blood prescribing clinicians and nurses.Approach: Descriptive ex post facto survey design.Methods: A total of 264 purposively selected blood prescribing clinicians and nurses from the four Human Development Index (HDI groups of countries (low, medium, high, and very high participated in this study

Optimization of geothermal well trajectory in order to minimize borehole failure

Science.gov (United States)

Dahrabou, A.; Valley, B.; Ladner, F.; Guinot, F.; Meier, P.

2017-12-01

In projects based on Enhanced Geothermal System (EGS) principle, deep boreholes are drilled to low permeability rock masses. As part of the completion operations, the permeability of existing fractures in the rock mass is enhanced by injecting large volumes of water. These stimulation treatments aim at achieving enough water circulation for heat extraction at commercial rates which makes the stimulation operations critical to the project success. The accurate placement of the stimulation treatments requires well completion with effective zonal isolation, and wellbore stability is a prerequisite to all zonal isolation techniques, be it packer sealing or cement placement. In this project, a workflow allowing a fast decision-making process for selecting an optimal well trajectory for EGS projects is developed. In fact, the well is first drilled vertically then based on logging data which are costly (100 KCHF/day), the direction in which the strongly deviated borehole section will be drilled needs to be determined in order to optimize borehole stability and to intersect the highest number of fractures that are oriented favorably for stimulation. The workflow applies to crystalline rock and includes an uncertainty and risk assessment framework. An initial sensitivity study was performed to identify the most influential parameters on borehole stability. The main challenge in these analyses is that the strength and stress profiles are unknown independently. Calibration of a geomechanical model on the observed borehole failure has been performed using data from the Basel Geothermal well BS-1. In a first approximation, a purely elastic-static analytical solution in combination with a purely cohesive failure criterion were used as it provides the most consistent prediction across failure indicators. A systematic analysis of the uncertainty on all parameters was performed to assess the reliability of the optimal trajectory selection. To each drilling scenario, failure

iPot: Improved potato monitoring in Belgium using remote sensing and crop growth modelling

Science.gov (United States)

Piccard, Isabelle; Gobin, Anne; Curnel, Yannick; Goffart, Jean-Pierre; Planchon, Viviane; Wellens, Joost; Tychon, Bernard; Cattoor, Nele; Cools, Romain

2016-04-01

Potato processors, traders and packers largely work with potato contracts. The close follow up of contracted parcels is important to improve the quantity and quality of the crop and reduce risks related to storage, packaging or processing. The use of geo-information by the sector is limited, notwithstanding the great benefits that this type of information may offer. At the same time, new sensor-based technologies continue to gain importance and farmers increasingly invest in these. The combination of geo-information and crop modelling might strengthen the competitiveness of the Belgian potato chain in a global market. The iPot project, financed by the Belgian Science Policy Office (Belspo), aims at providing the Belgian potato processing sector, represented by Belgapom, with near real time information on field condition (weather-soil), crop development and yield estimates, derived from a combination of satellite images and crop growth models. During the cropping season regular UAV flights (RGB, 3x3 cm) and high resolution satellite images (DMC/Deimos, 22m pixel size) were combined to elucidate crop phenology and performance at variety trials. UAV images were processed using a K-means clustering algorithm to classify the crop according to its greenness at 5m resolution. Vegetation indices such as %Cover and LAI were calculated with the Cyclopes algorithm (INRA-EMMAH) on the DMC images. Both DMC and UAV-based cover maps showed similar patterns, and helped detect different crop stages during the season. A wide spread field monitoring campaign with crop observations and measurements allowed for further calibration of the satellite image derived vegetation indices. Curve fitting techniques and phenological models were developed and compared with the vegetation indices during the season, both at trials and farmers' fields. Understanding and predicting crop phenology and canopy development is important for timely crop management and ultimately for yield estimates. An

Drilling and associated drillhole measurements of the pilot hole ONK-PH11

International Nuclear Information System (INIS)

Karttunen, P.; Mancini, P.; Pekkanen, J.; Poellaenen, J.; Tarvainen, A.-M.; Toropainen, V.; Pere, T.

2011-01-01

The construction of the ONKALO access tunnel started in September 2004 at Olkiluoto. Most of the investigations related to the construction of the access tunnel aim to ensure successful excavations, reinforcement and sealing. Pilot holes are drillholes, which are core drilled along the tunnel profile. The length of the pilot holes typically varies from several tens of metres to a couple of hundred metres. The pilot holes are aimed to confirm the quality of the rock mass for tunnel construction, and in particular to identify water conductive fractured zones and to provide information that could result in modifications of the existing construction plans. The pilot hole ONK-PH11 was drilled from chainage 3922 to chainage 4053 in October 2009. The length of the hole is 131.21 metres. The aim during the drilling work was to orient core samples as much as possible. The deviation of the drillhole was measured during and after the drilling phase. Electric conductivity was measured from the collected returning water samples. Hydraulic conductivity of the fractures or fractured zones was measured by Posiva Flow Log equipment. During flow measurements also electric conductivity and temperature were measured. In flow logging test sections of 0.5 m and increments of 0.1 m were used. The water loss measurements were performed after drilling was completed by the drilling company. Logging of the core samples included the following parameters: lithology, foliation, fracturing, RQD, fractured zones, weathering and possible intersections. The rock mechanical logging was based on Q-classification. The rock strength and deformation were determined with Rock Tester -equipment. Geophysical logging and optical imaging of the pilot hole included the fieldwork of all surveys, the integration of the data as well as interpretation of the acoustic and drillhole radar data. The groundwater samples were collected from the open hole without any packers. The collected groundwater samples were

A Hydraulic Stress Measurement System for Investigations at Depth in Slim Boreholes

Science.gov (United States)

Ask, M. V. S.; Ask, D.; Cornet, F. H.; Nilsson, T.; Talib, M.; Sundberg, J.

2017-12-01

Knowledge of the state of stress is essential to most underground work in rock mechanics as it provides means to analyze the mechanical behavior of a rock mass, serve as boundary condition in rock engineering problems, and help understand rock mass stability and groundwater flow. Luleå University of Technology (LTU) has developed and built a wire-line system for hydraulic rock stress measurements in slim boreholes together with the University of Strasbourg and Geosigma AB. The system consists of a downhole- and a surface unit. The downhole unit consists of hydraulic fracturing equipment (straddle packers and downhole imaging tool) and their associated data acquisition systems. The surface unit comprises of a 40-foot container permanently mounted on a trailer, which is equipped with a tripod, wire-line winches, water hydraulics, and a generator. The surface unit serves as a climate-independent on-site operations center, as well as a self-supporting transport vessel for the entire system. Three hydraulic stress testing methods can be applied: hydraulic fracturing, sleeve fracturing and hydraulic testing of pre-existing fractures. The three-dimensional stress tensor and its variation with depth within a continuous rock mass can be determined in a scientific unambiguously way by integrating results from the three test methods. The testing system is state of the art in several aspects including: (1) Large depth range (3 km), (2) Ability to test three borehole dimensions, (3) Resistivity imager maps the orientation of tested fracture (which is highlighted); (4) Highly stiff and resistive to corrosion downhole testing equipment; and (5) Very detailed control on the injection flow rate and cumulative volume is obtained by a hydraulic injection pump with variable piston rate, and a highly sensitive flow-meter. These aspects highly reduce measurement-related uncertainties of stress determination. Commissioning testing and initial field tests are scheduled to occur in a 1200

Dentist–patient communication: what do patients and dentists remember following a consultation? Implications for patient compliance

Directory of Open Access Journals (Sweden)

Misra S

2013-06-01

Full Text Available Sara Misra, Blánaid Daly, Stephen Dunne, Brian Millar, Mark Packer, Koula AsimakopoulouDental Institute, King's College London, London, UKBackground: There is a lack of information about the extent to which patients recall key facts of dental consultations. Forgetting health advice undermines adherence with such instructions and is a potential problem. This study assessed the quantity and type of information recalled in a dental consultation, dentist–patient agreement over the contents of the consultation, and the relationship of such recall with patient satisfaction.Methods: Using a cross-sectional design, questionnaire data were obtained from patients recruited through a letter and presenting for a routine dental consultation. General issues discussed, specific information about oral health given, dentist-performed procedures, and agreed future actions were reported independently in writing, by patients and also by the treating dentist immediately postconsultation. Additionally, patients completed a dental visit satisfaction questionnaire.Results: Responses (n = 26, 55% response rate were content-analyzed, and data on the number and type of information that was recalled were obtained. Interrater reliability was established. Inferential testing showed differences in dentist–patient recall, dentist–patient agreement, and the association between patient recall and satisfaction. Dentists recalled more information than patients (P = 0.001. Dentists further reported giving more dental health education (P = 0.006 and discussing more future actions (P = 0.002 than patients actually remembered. Technical (eg, crowns/bridges rather than psychosocial (eg, pain/embarrassment issues were reported more often (P = 0.001 by both dentists and patients. Dentist–patient agreement over issues discussed and procedures performed was higher (kappa = 0.210–0.310 than dental health education agreement and agreed future actions (kappa = 0.060–0.110. There

Evaluation of Ion Exchange Materials in K Basin Floor Sludge and Potential Solvents for PCB Extraction from Ion Exchange Materials

International Nuclear Information System (INIS)

Schmidt, A.J.; Klinger, G.S.; Bredt, P.R.

1998-01-01

Approximately 73 m 3 of heterogeneous solid material, ''sludge,'' (upper bound estimate, Packer 1997) have accumulated at the bottom of the K Basins in the 100 K Area of the Hanford Site. This sludge is a mixture of spent fuel element corrosion products, ion exchange materials (organic and inorganic), graphite-based gasket materials, iron and aluminum metal corrosion products, sand, and debris (Makenas et al. 1996, 1997). In addition, small amounts of polychlorinated biphenyls (PCBs) have been found. These small amounts are significant from a regulatory standpoint. Ultimately, it is planned to transfer the K Basins sludge to the Hanford double shell tanks (DSTs). Chemical pretreatment is required to address criticality issues and the destruction or removal of PCBs before the K Basin sludge can be transferred to the DSTs. Eleven technologies have been evaluated (Papp 1997) as potential pretreatment methods. Based on the evaluations and engineering studies and limited testing, Fluor Daniel Hanford recommended solvent washing of the K Basin sludge, followed by nitric acid dissolution and, potentially, peroxide addition (FDH 1997). The solvent washing (extraction) and peroxide addition would be used to facilitate PCB removal and destruction. Following solvent extraction, the PCBs could be distilled and concentrated for disposal as a low-level waste. The purpose of the work reported here was to continue investigating solvent extraction, first by better identifying the ion exchange materials in the actual sludge samples and then evaluating various solvents for removing the PCBs or possibly dissolving the resins. This report documents some of the process knowledge on ion exchange materials used and spilled in the K Basins and describes the materials identified from wet sieving KE Basin floor and canister sludge and the results of other analyses. Several photographs are included to compare materials and illustrate material behavior. A summary of previous tests on solvent

Thermocouple psychrometer measurements of in situ water potential changes in heated welded tuff

International Nuclear Information System (INIS)

Mao, Nai-hsien; Wang, H.F.

1991-05-01

Ten thermocouple psychrometers (TCPs) to measure water potential (WP) were installed in three holes in G-Tunnel at the Nevada Test Site as part of the Prototype Engineered Barrier System Field Tests. These integrated tests measured several parameters as a function of location and time within a few meters of a heater emplaced in welded tuff. The primary goal of the TCP experiment was to find out whether the combination of laboratory calibration and field use of the TCP can provide useful data for determining the change of moisture condition in the field. We calibrated the TCPs in NaCl solutions up to 80 degree C(176 degree F) in the laboratory. In two holes, we used rubber sleeves and packers to house TCPs, and in the third hole, we used foam. All three holes were grouted behind the TCP assemblages. Field results of the heater test showed that small temperature gradients were present for all measurements. Nevertheless, the WP calibration made the necessary correction for the nonisothermal condition. A drying and re-wetting cycle peaked at about day 140 with a WP of -65 bar in borehole P3, located below the heater. A similar cycle but reduced in scale was found at about day 175 with a WP of -45 bar in borehole P2, above the heater. This difference in drying behavior above and below the heater was also observed from neutron data and was explained as a gravity effect. As temperatures increased, the evaporation rate of pore water increased, In unfractured rock, the gas-phase flow was primarily outward. Water condensed above the heater would drain back to keep the boiling region wet, but water condensed below the heater would drain away from the boiling region. This conceptual model explained both the time and magnitude differences for data from holes above and below the heater. 7 refs., 14 figs., 2 tabs

A Hydraulic Stress Measurement System for Deep Borehole Investigations

Science.gov (United States)

Ask, Maria; Ask, Daniel; Cornet, Francois; Nilsson, Tommy

2017-04-01

Luleå University of Technology (LTU) is developing and building a wire-line system for hydraulic rock stress measurements, with funding from the Swedish Research Council and Luleå University of Technology. In this project, LTU is collaborating with University of Strasbourg and Geosigma AB. The stress state influences drilling and drillability, as well as rock mass stability and permeability. Therefore, knowledge about the state of in-situ stress (stress magnitudes, and orientations) and its spatial variation with depth is essential for many underground rock engineering projects, for example for underground storage of hazardous material (e.g. nuclear waste, carbon dioxide), deep geothermal exploration, and underground infrastructure (e.g. tunneling, hydropower dams). The system is designed to conduct hydraulic stress testing in slim boreholes. There are three types of test methods: (1) hydraulic fracturing, (2) sleeve fracturing and (3) hydraulic testing of pre-existing fractures. These are robust methods for determining in situ stresses from boreholes. Integration of the three methods allows determination of the three-dimensional stress tensor and its spatial variation with depth in a scientific unambiguously way. The stress system is composed of a downhole and a surface unit. The downhole unit consists of hydraulic fracturing equipment (straddle packers and downhole imaging tool) and their associated data acquisition systems. The testing system is state of the art in several aspects including: (1) Large depth range (3 km), (2) Ability to test three borehole dimensions (N=76 mm, H=96 mm, and P=122 mm), (3) Resistivity imager maps the orientation of tested fracture; (4) Highly stiff and resistive to corrosion downhole testing equipment; and (5) Very detailed control on the injection flow rate and cumulative volume is obtained by a hydraulic injection pump with variable piston rate, and a highly sensitive flow-meter. At EGU General Assembly 2017, we would like to

SPI Conformance Gel Applications in Geothermal Zonal Isolation

Energy Technology Data Exchange (ETDEWEB)

Burns, Lyle [Clean Tech Innovations, Bartlesville, OK (United States)

2017-08-08

Zonal isolation in geothermal injection and producing wells is important while drilling the wells when highly fractured geothermal zones are encountered and there is a need to keep the fluids from interfering with the drilling operation. Department of Energy’s (DOE) Energy Efficiency and Renewable Energy (EERE) objectives are to advance technologies to make it more cost effective to develop, produce, and monitor geothermal reservoirs and produce geothermal energy. Thus, zonal isolation is critical to well cost, reservoir evaluation and operations. Traditional cementing off of the lost circulation or thief zones during drilling is often done to stem the drilling mud losses. This is an expensive and generally unsuccessful technique losing the potential of the remaining fracture system. Selective placement of strong SPI gels into only the offending fractures can maintain and even improve operational efficiency and resource life. The SPI gel system is a unique silicate based gel system that offers a promising solution to thief zones and conformance problems with water and CO2 floods and potentially geothermal operations. This gel system remains a low viscosity fluid until an initiator (either internal such as an additive or external such as CO2) triggers gelation. This is a clear improvement over current mechanical methods of using packers, plugs, liners and cementing technologies that often severely damage the highly fractured area that is isolated. In the SPI gels, the initiator sets up the fluid into a water-like (not a precipitate) gel and when the isolated zone needs to be reopened, the SPI gel may be removed with an alkaline solution without formation damage occurring. In addition, the SPI gel in commercial quantities is expected to be less expensive than competing mechanical systems and has unique deep placement possibilities. This project seeks to improve upon the SPI gel integrity by modifying the various components to impart temperature stability for use in

Improvement of spectrographic analyses by the use of a mechanical packer in the arc distillation technique; Amelioration de l'analyse spectrograpique par l'utilisation d'un tasseur mecanique dans la methode de distillation dans l'arc

Energy Technology Data Exchange (ETDEWEB)

Buffereau, M; Deniaud, S; Pichotin, B; Violet, R [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

One studies improvement of spectrographic analysis by the 'carrier distillation' method with the help of a mechanical device. Experiments and advantages of such an apparatus are given (precision and reproducibility improvement, operator factor suppression). A routine apparatus (French patent no 976.493) is described. (authors) [French] On etudie l'amelioration des analyses spectrographiques par la methode de distillation avec entra eur dans l'arc au moyen d'un tasseur mecanique. On indique les experiences realisees et les avantages de l'emploi d'un tel appareil (amelioration de la precision et de la reproductibilite, suppression du facteur operateur). On decrit l'appareil de routine objet du brevet no 976.493 du 29 mai 1964. (auteurs)

The natural and artificial hydration of a bentonite engineered barrier system in a full-scale KBS-3V mock-up; results from the first 7 years of the large scale gas injection test (LASGIT)

International Nuclear Information System (INIS)

Cuss, R.J.; Harrington, J.F.; Noy, D.J.; Bennett, D.P.; Sellin, P.

2012-01-01

pore water pressure and total stress. These pressure dependent features occurred at multiple sites at different times in the test history. These pathways were relatively short lived, closing when water pressure was reduced. Packers were installed into the pressure relief holes on day 414 and sections in them closed over the period to day 519. These operations caused clear effects throughout the deposition hole, however there was no repeat of the formation of piping through discrete channels so, on day 656, pressures to the artificial hydration filters on the canister were increased to 2,350 kPa. Throughout the complete history of the Lasgit test (day 1 - 2,800+) a number of canister filters and all of the filter mats have acted as sites of artificial hydration of the buffer. pore water pressure monitored at the rock wall greatly increased in response to the commissioning of the packers. Since this time, pore water pressure has slowly decayed due to the draw-down of the Aespoe tunnel and range between 880 - 2,850 kPa. The long-term reduction of pore water pressure pre-dates Lasgit and is likely to be due to the construction of the Aespoe HRL. Certain locations on the deposition wall have seen episodes of increased pore water pressure as fractures in the deposition hole wall have undergone episodic flow. Monitored pore water pressures within the bentonite have increased during the test in a complex manner, but remain relatively low at 300 - 520 kPa. Radial and axial stresses at the deposition wall have significantly increased during the experiment and now range between 2,300 kPa and 6,500 kPa. Radial stress continues to increase, whereas axial stress has generally reached a plateau. Stress measured on the canister ranges between 5,400 and 6,500 kPa. Throughout the history of Lasgit there have been a number of events that have given 'snapshots' of the hydraulic properties of the buffer. The change in permeability and storage calculated for each of these events show that

Investigation of sulphide in core drilled boreholes KLX06, KAS03 and KAS09 at Laxemar and Aespoe Chemical-, microbiological- and dissolved gas data from groundwater in four borehole sections

Energy Technology Data Exchange (ETDEWEB)

Rosdahl, Anette (Geosigma AB (Sweden)); Pedersen, Karsten; Hallbeck, Lotta (Microbial Analytics Sweden AB (Sweden)); Wallin, Bill (Geokema AB (Sweden))

2011-01-15

This report describes a study performed during 2009 which focused on the production of sulphide (microbial sulphate reduction) in deep groundwater that was implemented in the core drilled boreholes KLX06, -475 to 482 meter above sea level, m a s l, KAS03,-97 to 241 and -613 to 984 m a s l, and KAS09, -96 to -125 m a s l, at Laxemar and Aspo. The study aimed to increase knowledge of background groundwater levels of sulphide and its variations in time and space through the analysis of sulphide and parameters related to sulphide production. Sampling of groundwater was conducted in three core drilled boreholes of varying age as time series with continuous pumping and as single samples. The analysis program covered chemical parameters (pH, chloride, sulphate, iron, and organic carbon), dissolved gas composition, stable isotopes in groundwater (delta2H, delta18O, delta34S, delta13C), stable isotopes of gaseous compounds (delta2H, delta13C, delta18O), microbiological parameters (sulphate- and iron reducing bacteria, SRB and IRB), phthalates and low molecular mass organic acids (LMMOA). The sampling in KLX06 was carried out as time series with a 9 week pause in pumping. When the water volume discharged was about 150 times that of the packer-isolated borehole section, sulphides decreased from 7 mg L-1 to 0.05 mg L-1 and the salinity increased from 740 to 1,480 mg L-1. After a 9 weeks pause in pumping, the sulphide concentration and salinity again approached the original values, i.e. 7 mg L-1 of sulphide and 450 mg L-1 of chloride. The SRB and IRB showed high concentrations that were reduced during pumping in the borehole. The water in the standpipe which has a different water composition than the groundwater, also showed similar high concentrations of sulphide and SRB. The standpipe is a plastic pipe in the wider upper part of the borehole; connected with the tube from the packer of the borehole section and used to accommodate a filter and a groundwater pump when collecting

Investigation of sulphide in core drilled boreholes KLX06, KAS03 and KAS09 at Laxemar and Aespoe: Chemical-, microbiological- and dissolved gas data from groundwater in four borehole sections

International Nuclear Information System (INIS)

Rosdahl, Anette; Pedersen, Karsten; Hallbeck, Lotta; Wallin, Bill

2011-01-01

This report describes a study performed during 2009 which focused on the production of sulphide (microbial sulphate reduction) in deep groundwater that was implemented in the core drilled boreholes KLX06, -475 to 482 meter above sea level, m a s l, KAS03,-97 to 241 and -613 to 984 m a s l, and KAS09, -96 to -125 m a s l, at Laxemar and Aspo. The study aimed to increase knowledge of background groundwater levels of sulphide and its variations in time and space through the analysis of sulphide and parameters related to sulphide production. Sampling of groundwater was conducted in three core drilled boreholes of varying age as time series with continuous pumping and as single samples. The analysis program covered chemical parameters (pH, chloride, sulphate, iron, and organic carbon), dissolved gas composition, stable isotopes in groundwater (δ 2 H, δ 18 O, δ 34 S, δ 13 C), stable isotopes of gaseous compounds (δ 2 H, δ 13 C, δ 18 O), microbiological parameters (sulphate- and iron reducing bacteria, SRB and IRB), phthalates and low molecular mass organic acids (LMMOA). The sampling in KLX06 was carried out as time series with a 9 week pause in pumping. When the water volume discharged was about 150 times that of the packer-isolated borehole section, sulphides decreased from 7 mg L -1 to 0.05 mg L -1 and the salinity increased from 740 to 1,480 mg L -1 . After a 9 weeks pause in pumping, the sulphide concentration and salinity again approached the original values, i.e. 7 mg L -1 of sulphide and 450 mg L -1 of chloride. The SRB and IRB showed high concentrations that were reduced during pumping in the borehole. The water in the standpipe which has a different water composition than the groundwater, also showed similar high concentrations of sulphide and SRB. The standpipe is a plastic pipe in the wider upper part of the borehole; connected with the tube from the packer of the borehole section and used to accommodate a filter and a groundwater pump when collecting

Middlesex FUSRAP Site - A Path to Site-Wide Closure - 13416

Energy Technology Data Exchange (ETDEWEB)

Miller, David M. [ECC, 110 Fieldcrest Ave, Ste 31, Edison, NJ, 08837 (United States); Edge, Helen [US Army Corps of Engineers - NYD, 26 Federal Plaza, Room 1811, New York, NY, 10278 (United States)

2013-07-01

investigation was designed to accumulate multiple lines of evidence to determine the source and to delineate the extent of contamination, as required to complete the CERCLA Process and gain regulatory acceptance. Investigative techniques included in-well vertical flow tracing, borehole geophysics and packer testing of temporary test holes to characterize contamination in the bedrock fractures beneath the site, and to delineate likely source areas. (authors)

Hydrogeological evidence of low rock mass permeabilities in ordovician strata: Bruce nuclear site

International Nuclear Information System (INIS)

Beauheim, R.L.; Roberts, R.M.; Avis, J.D.; Heagle, D.

2011-01-01

One of the key attributes contributing to the suitability of the Bruce nuclear site to host a Deep Geologic Repository (DGR) for Low and Intermediate Level Waste (L&ILW) is the low permeability of the Ordovician host rock and of the overlying and underlying strata. The permeability of these rocks is so low that diffusion is a much more significant transport mechanism than advection. Hydrogeological evidence for the low permeability of the Ordovician strata comes from two principal sources, direct and indirect. Direct evidence of low permeability is provided by the hydraulic testing performed in deep boreholes, DGR-2 through DGR-6. Straddle-packer hydraulic testing was performed in 57 Ordovician intervals in these five holes. The testing provided continuous coverage using ~30-m straddle intervals of the Ordovician strata exposed in boreholes DGR-2, DGR-3, DGR-4, and DGR-5, while testing was targeted on discontinuous 10.2-m intervals in DGR-6. The average horizontal hydraulic conductivities of these intervals determined from the tests ranged from 2E-16 to 2E-10 m/s. The Lower Member of the Cobourg Formation, which is the proposed host formation for the DGR, was found to have a horizontal hydraulic conductivity of 4E-15 to 3E-14 m/s. The only horizontal hydraulic conductivity values measured that were greater than 2E-12 m/s are from the Black River Group, located at the base of the Ordovician sedimentary sequence. Indirect evidence of low permeability is provided by the observed distribution of hydraulic heads through the Ordovician sequence. Hydraulic head profiles, defined by hydraulic testing and confirmed by Westbay multilevel monitoring systems, show significant underpressures relative to a density-compensated hydrostatic condition throughout most of the Ordovician strata above the Black River Group, whereas the Black River Group is overpressured. Pressure differences of 1 MPa or more are observed between adjacent intervals in the boreholes. The observed

Drilling and associated drillhole measurements of the pilot hole ONK-PH9

International Nuclear Information System (INIS)

Karttunen, P.; Pekkanen, J.; Poellaenen, J.; Tarvainen, A.-M.; Toropainen, V.; Lamminmaeki, T.; Kosunen, P.

2010-01-01

was to get information of the composition of ONKALO's groundwater before the construction will disturb the chemical condition. The groundwater samples were collected from the open hole without any packers. The collected groundwater samples were analysed in different laboratories. (orig.)

Drilling and associated drillhole measurements of the pilot hole ONK-PH10

International Nuclear Information System (INIS)

Mancini, P.; Karttunen, P.; Lokkila, M.; Pekkanen, J.; Poellaenen, J.; Tarvainen, A.-M.; Toropainen, V.; Kosunen, P.; Pere, T.

2010-08-01

ONKALO's groundwater before the construction will disturb the chemical condition. The groundwater samples were collected from the open hole without any packers. The collected groundwater samples were analysed in different laboratories. (orig.)

A multidisciplinary fractured rock characterization study at Raymond field site, Raymond, California

International Nuclear Information System (INIS)

Karasaki, Kenzi; Freifeld, Barry; Cohen, Andrew; Cook, Paul; Vasco, Don; Grossenbacher, Ken

2001-01-01

A dedicated field site was developed and a suite of experiments were conducted in the Sierra Nevada foothills, near the town of Raymond, California to develop and test a multi-disciplinary approach to the characterization of groundwater flow and transport in fractured rocks. A wealth of geologic, hydrologic and geophysical data was collected at the site using a variety of unique tools. A cluster of nine approximately 90 m deep boreholes were drilled at the site in a V-shaped pattern with an angle of 60 degrees. The boreholes are spaced 7.5, 15, 30, and 60 meters from the central borehole. Various geophysical and hydrologic tests were conducted in and between these boreholes. Integration of cross-hole radar and seismic tomography, borehole flow surveys and images from a new digital borehole scanner indicated that groundwater flow is mainly confined to a few sub-horizontal fracture zones. A unique suite of hydraulic tests were conducted, in which three to four intervals in each of the nine boreholes were isolated using pneumatic packers. Some 130 injection tests were conducted, and more than 4,100 cross-hole transient pressure measurements were obtained. A computer algorithm was developed to analyze such massive interference data systematically. As a result of the analysis, an image of the fracture connections emerged, which is consistent with the geophysical data. High precision tiltmeters were effective in remotely characterizing the preferential flow path. Several radial convergent tracer tests were conducted by injecting a mixture of several conservative tracers and one sorbing tracer: deuterium, fluorescein, lithium bromide and polystyrene micro-spheres. Some differences between the breakthrough curves are observed, which may be due to possible differences among so-called 'conservative' tracers. Some characterization tools were found to be more effective than others in locating flowing fractures. However, no single tool was almighty. Characterization of

Arsenic evolution in fractured bedrock wells in central Maine, USA

Science.gov (United States)

Yang, Q.; Zheng, Y.; Culbertson, C.; Schalk, C.; Nielsen, M. G.; Marvinney, R.

2010-12-01

, as well as to model the arsenic flux and mobilization from the fractures into the borehole by collecting fracture specific samples using inflatable packers and to differentiate the arsenic in dissolved, colloidal, and particulate forms using filtration methods.

Phase I of The National Beef Quality Audit-2011: quantifying willingness-to-pay, best-worst scaling, and current status of quality characteristics in different beef industry marketing sectors.

Science.gov (United States)

Igo, J L; VanOverbeke, D L; Woerner, D R; Tatum, J D; Pendell, D L; Vedral, L L; Mafi, G G; Moore, M C; McKeith, R O; Gray, G D; Griffin, D B; Hale, D S; Savell, J W; Belk, K E

2013-04-01

The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P market sectors were considered, "eating satisfaction" was shown to

Interpretation of the tracer testing conducted in the Leuggern borehole

International Nuclear Information System (INIS)

McNeish, J.A.; Andrews, R.W.; Vomvoris, S.

1990-12-01

Tracer testing was conducted in the Leuggern borehole from July to December 1988 to evaluate the hydraulic properties of the crystalline host rock. The tested interval was an approximately 50 m section of fractured crystalline rock at a depth of greater than 1,600 m. The testing consisted of three tracer injection/recovery periods (uranin - 44 days, eosin - 30 days, and naphtionat -14 days), which utilized tracer injection/circulation rates, ranging between 25 and 50 ml/min. During these testing periods, tracer was injected in either of two 1/4 flow lines ported at the top or bottom of the interval and recovered from the other. Following the three tracer injection periods, a natural outflow tracer recovery test was conducted from the central tubing at an average outflow of 12 l/min. The central tubing was ported near the center of the test interval. Data collected during the testing periods included: continuous monitoring of fluid temperature, injection pressure, and electrical conductivity as well as discrete measurement of flow rates, electrical conductivity, fluid temperature, and tracer concentration. Testing results indicate a downward vertical flow of approximately 195-225 ml/min in the isolated interval, from an upper fracture inflow zone to a lower fracture outflow zone. Through analysis of the dilution levels of uranin and eosin during the injection/recovery periods, and review of field data, the top of the upper inflow zone was determined to be approximately 13 m below the top flow line and the bottom of the outflow zone to be approximately 3 to 5 meters above the bottom flow line. The calculated transmissivity value of 6E-05 m 2 /s from observed outflow rate and pressure recovery data, is consistent with results derived from previous hydraulic packer testing in the interval. The effective porosity was determined to be 0.1. Dispersion coefficient values ranged from 1.0 m to 5.0 m. The lateral hydraulic gradient value calculated from tracer recovery

New roles of LWD and wireline logging in scientific ocean drilling

Science.gov (United States)

Sanada, Y.; Kido, Y. N.; Moe, K.; Aoike, K.

2014-12-01

D/V Chikyu implemented by CDEX/JAMSTEC joined IODP from 2007. Various LWD (Logging While Drilling) and wireline logging have been carried out in many expeditions and for various purposes. Significant features of logging in Chikyu expeditions are many use of LWD than wireline logging, and riser dirlling. riser selected specific tools for each scientific target, and 3) carried out various borehole experiments. LWD has been more popular than wireline logging in Chikyu expeditions, because its advantages match theirs science targets. The advantages are followings. 1) LWD has more opportunities for measurement in unstable borehole, such as in the series of Nankai trough drilling expeditions. 2) LWD realtime data allows us to make realtime interpretation and operational decision. Realtime interpretation was required to set obsevartory at the properposition. 3) LWD before coring allows us to make a strategy of spot coring.We can design coring intervals for our interest and core length to improve core recovery.Riser drilling brings us merits for logging. One is hole stability (good hole condition) and the other is the use of large diameter tools. Controled drilling mud in riser drilling system prevent mud invasion to formation and mitigates collapse of borehole wall. They reduce the risk of tool stack and improve data quality. Large diameter of riser pipe enhances variation of tool seizes. A couple of new tools were used for new measurement and improvement of the data quality. For example, SonicScanner (trademark of Schulumberger) successfully measured compressional and share velocity in very low velocities at the soft sediment, where it has been difficult to measure them with conventional DSI tool (Exp319). The stress and pore pressure in the borehole were measured with the wireline logging tool, (Schlumberger MDT). The single probe tool enable to measure temporal formation fluid pressure. The double packer tool enable to fracture test by sealing and pumping in the

The hydrogeologic environment for a proposed deep geologic repository in Canada for low and intermediate level radioactive waste - 59285

International Nuclear Information System (INIS)

Sykes, Jonathan F.; Normani, Stefano D.; Yin, Yong; Jensen, Mark R.

2012-01-01

A Deep Geologic Repository (DGR) for low and intermediate level radioactive waste has been proposed by Ontario Power Generation for the Bruce nuclear site in Ontario, Canada. As proposed the DGR would be constructed at a depth of about 680 m below ground surface within the argillaceous Ordovician limestone of the Cobourg Formation. This paper describes the hydrogeology of the DGR site developed through both site characterization studies and regional-scale numerical modelling analysis. The analysis provides a framework for the assembly and integration of the site-specific geo-scientific data and examines the factors that influence the predicted long-term performance of the geosphere barrier. Flow system evolution was accomplished using both the density-dependent FRAC3DVS-OPG flow and transport model and the two-phase gas and water flow computational model TOUGH2-MP. In the geologic framework of the Province of Ontario, the DGR is located on the eastern flank of the Michigan Basin. Borehole logs covering Southern Ontario combined with site-specific data from 6 deep boreholes have been used to define the structural contours and hydrogeologic properties at the regional-scale of the modelled 31 sedimentary strata that may be partially present above the Precambrian crystalline basement rock. The regional-scale domain encompasses an approximately 18500 km 2 region extending from Lake Huron to Georgian Bay. The groundwater zone below the Devonian includes units containing stagnant water having high concentrations of total dissolved solids that can exceed 300 g/L. The Ordovician sediments are significantly under-pressured. The horizontal hydraulic conductivity for the Cobourg limestone is estimated to be 2x10 -14 m/s based on straddle-packer hydraulic tests. The low advective velocities in the Cobourg and other Ordovician units result in solute transport that is diffusion dominant with Peclet numbers less than 0:003 for a characteristic length of unity. Long

KBS-3H design description 2007

International Nuclear Information System (INIS)

Autio, J.; Hagros, A.; Johansson, E.

2008-12-01

The presented KBS-3H design work was carried out in KBS-3H project in 2004 - 2007, which was a joint project between Svensk Kaernbraenslehantering AB (SKB) in Sweden and Posiva Oy in Finland. The overall objectives of the project phase were to demonstrate that the horizontal deposition alternative is technically feasible and to demonstrate that it fulfils the same long-term safety requirements as the reference design KBS-3V. The KBS-3H design is a variant of the KBS-3 method and an alternative to the KBS-3V design. In the KBS-3H design alternative, multiple canisters containing spent fuel are emplaced at about 420 m depth in bedrock in parallel, 100 - 300 m long, approximately horizontal deposition drifts whereas the KBS-3V design calls for vertical emplacement of the canisters in individual deposition holes. As a result of design work, the two previous KBS-3H repository candidate designs called Basic Design (BD) and design based on Drainage, Artificial Watering and air Evacuation (DAWE) were developed on two different functional principles. At later phase of the project the BD alternative was found not to be robust in drifts with several large inflows and therefore a third less mature alternative called Semi Tight Compartments design (STC) was introduced to function in these conditions. Significant effort was made in the project to resolve studies and testing the functional uncertainties related to buffer behaviour which could e.g. cause piping, erosion, displacement and rupture of distance blocks. Major work was also carried for the design of supercontainer, development of large-scale post-grouting device, Mega-Packer, for grouting of rock, excavation of deposition drifts, layout design and evaluation of residual materials. This report also summarizes and highlights differences between different design alternatives and gives reasoning why DAWE design alternative is seen as the most interesting for future development together with novel less mature STC

In situ corrosion measurements by electrochemical method (IC experiment) at Mont Terri

International Nuclear Information System (INIS)

Dewonck, S.; Bataillon, C.; Crusset, D.; Schwyn, B.; Nakayama, N.; Kwong, G.

2010-01-01

Document available in extended abstract form only. The study of the interactions of steel pieces with an argillaceous rock is the aim of the IC experiment carried out in the Mont Terri Rock Laboratory (Switzerland). More precisely, the IC experiment consists in monitoring the corrosion rate of various steel (Inconel 690, 316L stainless steel, 2 carbon steels one representative of Andra concept and another of Nagra concept) at 80 deg. C, in anaerobic condition, in contact with the Opalinus clay formation. The corrosion rate monitoring is based on Electrochemical Impedance Spectroscopy (EIS). This method is not disturbing for the corrosion process i.e. the corrosion rate doesn't change during the electrochemical measurement. The main drawback of this method is that the corrosion process must be in stationary or quasi stationary state: EIS can only measure corrosion rates which do not change quickly with time. This method is well adapted for long term corrosion monitoring because long term corrosion rate evolves slowly. A special design of the experimental setup was developed to allow optimal interactions between rock and steel samples. It consists in mounting the steel samples inside of a bore-core section. This section is then placed at the extremity of the borehole equipment. The equipment is inserted in a vertical descending borehole and sealed by a large packer. Another particularity of the experimental setup is the possibility of heating the experimental section up to 80 deg. C. Finally, the equipment was built in such a way that such that it will be retrievable from the borehole after several years of experiment, in order to perform further analyses on the reacting materials (core and steel samples). A circulation loop links the experimental interval to the sampling, measuring various parameters (pH, Eh, electrical conductivity, dissolved oxygen and hydrogen) and control equipment installed in a cabinet, in the gallery of the underground laboratory. At the

Strategies for the management and prevention of conformation-related respiratory disorders in brachycephalic dogs

Directory of Open Access Journals (Sweden)

Packer RMA

2015-06-01

Full Text Available Rowena MA Packer,1 Michael S Tivers2 1Department of Clinical Science and Services, Royal Veterinary College, University of London, London, 2School of Veterinary Sciences, University of Bristol, Bristol, UK Abstract: Brachycephalic (short-muzzled dogs are increasingly popular pets worldwide, with marked increases in registrations of breeds such as the Pug and French Bulldog over the past decade in the UK. Despite their popularity, many brachycephalic breeds are affected by an early-onset, lifelong respiratory disorder, brachycephalic obstructive airway syndrome (BOAS. This disorder arises due to a mismatch in the proportions of the skull and the soft tissues held within the nose and pharynx, resulting in obstruction of the airway during respiration. Increased airway resistance encourages secondary changes such as eversion of the laryngeal saccules and collapse of the larynx. Clinical signs of BOAS are often early onset and chronic, including dyspnea, exercise intolerance, heat intolerance, and abnormal and increased respiratory noise. Episodes of severe dyspnea can also occur, leading to cyanosis, syncope, and death. BOAS may have a severe impact upon the welfare of affected dogs, compromising their ability to exercise, play, eat, and sleep. Although a well-described condition, with surgical treatments for the palliation of this disorder published since the 1920s, many dogs still experience airway restrictions postsurgically and a compromised quality of life. In addition, the prevalence of this disorder does not appear to have substantially reduced in this time, and may have increased. Ultimately, strategies to improve the breeding of these dogs to prevent BOAS are required to improve brachycephalic health and welfare. Recent studies have revealed conformational risk factors associated with BOAS, such as short muzzles and thick necks, which should be discouraged to avoid perpetuating this serious disorder. Positive changes to brachycephalic

Hydrologic Tests at Characterization Well R-14

Energy Technology Data Exchange (ETDEWEB)

S. McLin; W. Stone

2004-08-01

Well R-14 is located in Ten Site Canyon and was completed at a depth of 1316 ft below ground surface (bgs) in August 2002 within unassigned pumiceous deposits located below the Puye Formation (fanglomerate). The well was constructed with two screens positioned below the regional water table. Individual static depths measured for each isolated screen after the Westbay{trademark} transducer monitoring system was installed in mid-December 2002 were nearly identical at 1177 ft bgs, suggesting only horizontal subsurface flow at this time, location, and depth. Screen 1 straddles the geologic contact between the Puye fanglomerate and unassigned pumiceous deposits. Screen 2 is located about 50 ft deeper than screen 1 and is only within the unassigned pumiceous deposits. Constant-rate, straddle-packer, injection tests were conducted at screen 2, including two short tests and one long test. The short tests were 1 minute each but at different injection rates. These short tests were used to select an appropriate injection rate for the long test. We analyzed both injection and recovery data from the long test using the Theis, Theis recovery, Theis residual-recovery, and specific capacity techniques. The Theis injection, Theis recovery, and specific capacity methods correct for partial screen penetration; however, the Theis residual-recovery method does not. The long test at screen 2 involved injection at a rate of 10.1 gallons per minute (gpm) for 68 minutes and recovery for the next 85 minutes. The Theis analysis for screen 2 gave the best fit to residual recovery data. These results suggest that the 158-ft thick deposits opposite screen 2 have a transmissivity (T) equal to or greater than 143 ft{sup 2}/day, and correspond to a horizontal hydraulic conductivity (K) of at least 0.9 ft/day. The specific capacity method yielded a T value equal to or greater than 177 ft{sup 2}/day, and a horizontal K of at least 1.1 ft/day. Results from the injection and recovery phases of the

Difference flow measurements in Greenland, drillhole DH-GAP04 in July 2011

Energy Technology Data Exchange (ETDEWEB)

Poellaenen, J.; Heikkinen, P. [Poyry Finland Oy, Vantaa (Finland); Lehtinen, A.

2012-07-15

To improve the understanding of processes associated with glaciation and their impact on the long-term performance of a deep geological repository of spent nuclear fuel, the Greenland Analogue Project (GAP) has been initiated collaboratively by SKB, Posiva and NWMO. The study site encompasses a land terminus portion of the Greenland ice sheet, east of Kangerlussuaq, and is in many ways considered to be an appropriate analogue of the conditions that are expected to prevail in much of Canada and Fennoscandia during future glacial cycles. The project began in 2009 and is scheduled for completion in 2012. In 2011, deep drillhole DH-GAP04 was drilled at the study site and Posiva Flow Log measurements were carried out in the drillhole. The Posiva Flow Log, Difference Flow Method (PFL DIFF) uses a flowmeter that incorporates a flow guide and can be used for relatively quick determinations of transmissivity and hydraulic head in fractures/fractured zones in cored drillholes. The aim of the measurements was to find high transmissive fractures, which would define the target for water sampling, i.e. the location for the packers in the drillhole. This report presents the principles of the method and the results of measurements carried out in drillhole DH-GAP04 in July 2011. The length of the flow guide in the flow logging measurements was 10 m (section length). Flow into the drillhole or from the drillhole to the bedrock was measured within the section length. The measurements were carried out in both pumped and natural (i.e. un-pumped) conditions. Calculations of the transmissivity (T) and the hydraulic head (h) of the fractures are shown in the results. Measurements were carried out in drillhole length interval 184 - 675 m without pumping. During pumping, measurements were conducted in drillhole length interval 274 - 675 m due to permafrost condition above this level. The risk for the drillhole freezing over in the permafrost area was remarkable. Due to lack of time, the

Drilling and the associated drillhole measurements of the pilot hole ONK-PH8

International Nuclear Information System (INIS)

Karttunen, P.; Poellaenen, J.; Rautio, T.; Tarvainen, A.-M.; Lamminmaeki, T.; Kemppainen, K.; Kosunen, P.; Lampinen, H.

2009-02-01

's groundwater before the construction will disturb the chemical condition. The groundwater samples were collected from the open hole without any packers. The collected groundwater samples were analysed in different laboratories. (orig.)

Evaluation of Uncertainties in hydrogeological modeling and groundwater flow analyses. Model calibration

International Nuclear Information System (INIS)

Ijiri, Yuji; Ono, Makoto; Sugihara, Yutaka; Shimo, Michito; Yamamoto, Hajime; Fumimura, Kenichi

2003-03-01

This study involves evaluation of uncertainty in hydrogeological modeling and groundwater flow analysis. Three-dimensional groundwater flow in Shobasama site in Tono was analyzed using two continuum models and one discontinuous model. The domain of this study covered area of four kilometers in east-west direction and six kilometers in north-south direction. Moreover, for the purpose of evaluating how uncertainties included in modeling of hydrogeological structure and results of groundwater simulation decreased with progress of investigation research, updating and calibration of the models about several modeling techniques of hydrogeological structure and groundwater flow analysis techniques were carried out, based on the information and knowledge which were newly acquired. The acquired knowledge is as follows. As a result of setting parameters and structures in renewal of the models following to the circumstances by last year, there is no big difference to handling between modeling methods. The model calibration is performed by the method of matching numerical simulation with observation, about the pressure response caused by opening and closing of a packer in MIU-2 borehole. Each analysis technique attains reducing of residual sum of squares of observations and results of numerical simulation by adjusting hydrogeological parameters. However, each model adjusts different parameters as water conductivity, effective porosity, specific storage, and anisotropy. When calibrating models, sometimes it is impossible to explain the phenomena only by adjusting parameters. In such case, another investigation may be required to clarify details of hydrogeological structure more. As a result of comparing research from beginning to this year, the following conclusions are obtained about investigation. (1) The transient hydraulic data are effective means in reducing the uncertainty of hydrogeological structure. (2) Effective porosity for calculating pore water velocity of

The iPot Project: improved potato monitoring in Belgium using remote sensing and crop growth modelling

Science.gov (United States)

Piccard, Isabelle; Nackaerts, Kris; Gobin, Anne; Goffart, Jean-Pierre; Planchon, Viviane; Curnel, Yannick; Tychon, Bernard; Wellens, Joost; Cools, Romain; Cattoor, Nele

2015-04-01

Belgian potato processors, traders and packers are increasingly working with potato contracts. The close follow up of contracted parcels on the land as well as from above is becoming an important tool to improve the quantity and quality of the potato crop and reduce risks in order to plan the storage, packaging or processing and as such to strengthen the competitiveness of the Belgian potato chain in a global market. At the same time, precision agriculture continues to gain importance and progress. Farmers are obligated to invest in new technologies. Between mid-May and the end of June 2014 potato fields in Gembloux were monitored from emergence till canopy closure. UAV images (RGB) and digital (hemispherical) photographs were taken at ten-daily intervals. Crop emergence maps show the time (date) and degree of crop emergence and crop closure (in terms of % cover). For three UAV flights during the growing season RGB images at 3 cm resolution were processed using a K-means clustering algorithm to classify the crop according to its greenness. Based on the greenness %cover and daily cover growth were derived for 5x5m pixels and 25x25m pixels. The latter resolution allowed for comparison with high resolution satellite imagery. Vegetation indices such as %Cover and LAI were calculated with the Cyclopes algorithm (INRA-EMMAH) from high resolution satellite images (DMC/Deimos, 22m pixel size). DMC based cover maps showed similar patterns as compared with the UAV-based cover maps, and allows for further applications of the data in crop management. Today the use of geo-information by the (private) agricultural sector in Belgium is rather limited, notwithstanding the great benefits this type of information may offer, as recognized by the sector. The iPot project, financed by the Belgian Science Policy Office (BELSPO), aims to provide the Belgian potato sector, represented by Belgapom, with near real time information on field condition (weather-soil) and crop development and

Técnicas de caracterización hidrogeoquímica de ambientes profundos

Directory of Open Access Journals (Sweden)

García, M. M.

1993-08-01

Full Text Available The characterisation of the hydrogeochemical parameters controlling the radionuclide migration towards the biosphere implicates the deve10pment of a methodology including instrumentation and equipment for working in deep boreholes, according with the data in which we are more interested. This methodology consists of a systematic and detailled study of the boreholes (studies on the cores, geophysical parameters, hydraulic tests ... that allows to select zones for water sampling and characterisation. The selected areas are adequately isolated with a double packer system and coupled instrumentation for pumping water (pumps or gas lift systems. The isolated zone is cleaned by pumping, and the tracer concentration, tritium measures or the control of the stabilization of physico-chemical parameters, are good indicators of the representativity of the sample. Water, gases, particles, colloids and microorganisms sampling is made in glove boxes and the analysis are made in a movillaboratory in situ for determining the more sensible parameters, avoiding the sample alterations with the transport.El estudio de los posibles emplazamientos de residuos radiactivos en un medio geológico cualquiera en profundidad, requiere la caracterización de los parámetros hidrogeológicos e hidrogeoquímicos que controlan la migración de los radionucleidos hacia la biosfera. Para llevar a cabo esa caracterización se ha desarrollado una metodología que incluye: (1 estudio sistemático y minucioso de sondeos profundos con el fin de seleccionar zonas favorables para el muestreo del agua y su caracterización; (2 sellado de las zonas seleccionadas mediante obturadores; (3 bombeo de agua de la zona aislada, mediante bombas o sistemas de elevación con gas, con el fin de eliminar la contaminación producida por el agua de perforación. El control de la limpieza se realiza mediante el seguimiento de trazadores y la estabilización de los parámetros físico-químicos del agua

Safety and effectiveness of a glistening-free single-piece hydrophobic acrylic intraocular lens (enVista

Directory of Open Access Journals (Sweden)

Packer M

2013-09-01

Full Text Available Mark Packer,1 Luther Fry,2 Kevin T Lavery,3 Robert Lehmann,4 James McDonald,5 Louis Nichamin,6 Brian Bearie,7,† Jon Hayashida,8 Griffith E Altmann,8 Omid Khodai8 1Department of Ophthalmology, Oregon Health and Science University, Eugene, OR, USA; 2University of Kansas Medical Center, Kansas City, KS, USA; 3Wayne State University, Detroit, MI, USA; 4Baylor College of Medicine, Houston, TX, USA; 5University of Arkansas for Medical Sciences, Little Rock, AR, USA; 6Laurel Eye Clinic, Brookville, PA, USA; 7Grand Rapids Eye Institute, Grand Rapids, MI, USA; 8Bausch & Lomb, Aliso Viejo, CA, USA †Brian Bearie passed away on March 9, 2011 Purpose: To evaluate the safety and effectiveness of a single-piece hydrophobic acrylic intraocular lens (IOL; enVista model MX60; Bausch & Lomb, Rochester, NY, USA when used to correct aphakia following cataract extraction in adults. Methods: This was a prospective case series (NCT01230060 conducted in private practices in the US. Eligible subjects were adult patients with age-related cataract amenable to treatment with standard phacoemulsification/extracapsular cataract extraction. With follow-up of 6 months, primary safety and effectiveness end points included the rates of US Food and Drug Administration (FDA-defined cumulative and persistent adverse events and the percentage of subjects who achieved best-corrected visual acuity (BCVA of 20/40 or better at final visit. To evaluate rotational stability, subjects were randomized (1:1:1:1 to have the lens implanted in one of four axis positions in 45° increments. Results: A total of 122 subjects were enrolled. The rate of cumulative and persistent adverse events did not significantly exceed historical controls, as per FDA draft guidance. At the final postoperative visit, all subjects (100% achieved a BCVA of 20/40 compared with the FDA historical control of 96.7%. Rotation of the IOL between the two final follow-up visits was ≤5° for 100% of eyes, and refractive

Compilation and analysis of hydrogeological pressure responses to field activities in Olkiluoto during 2010-2012

Energy Technology Data Exchange (ETDEWEB)

Pentti, E.; Penttinen, T.; Vaittinen, T. [Poeyry Finland Oy, Vantaa (Finland)

2014-04-15

drawdowns are partially caused indirectly by the hydraulic connection along packer section L1 of OL-KR7. Based on the head observations in packed-off drillholes, sub-horizontal hydraulic zones form a layered system at the ONKALO area corresponding to current hydrogeological structure model. The results support the hypothesis of the relation between ductile deformation model and hydrogeological structure model but it cannot be confirmed, because packed-off drillholes are still mostly located at the ONKALO area. (orig.)

A New Method of Stress Measurement Based upon Elastic Deformation of Core Sample with Stress Relief by Drilling

Science.gov (United States)

Ito, T.; Funato, A.; Tamagawa, T.; Tezuka, K.; Yabe, Y.; Abe, S.; Ishida, A.; Ogasawara, H.

2017-12-01

When rock is cored at depth by drilling, anisotropic expansion occurs with the relief of anisotropic rock stresses, resulting in a sinusoidal variation of core diameter with a period of 180 deg. in the core roll angle. The circumferential variation of core diameter is given theoretically as a function of rock stresses. These new findings can lead various ideas to estimate the rock stress from circumferential variation of core diameter measured after the core retrieving. In the simplest case when a single core sample is only available, the difference between the maximum and minimum components of rock stress in a plane perpendicular to the drilled hole can be estimated from the maximum and minimum core diameters (see the detail in, Funato and Ito, IJRMMS, 2017). The advantages of this method include, (i) much easier measurement operation than those in other in-situ or in-lab estimation methods, and (ii) applicability in high stress environment where stress measurements need pressure for packers or pumping system for the hydro-fracturing methods higher than their tolerance levels. We have successfully tested the method at deep seismogenic zones in South African gold mines, and we are going to apply it to boreholes collared at 3 km depth and intersecting a M5.5 rupture plane several hundred meters below the mine workings in the ICDP project of "Drilling into Seismogenic zones of M2.0 - M5.5 earthquakes in deep South African gold mines" (DSeis) (e.g., http://www.icdp-online.org/projects/world/africa/orkney-s-africa/details/). If several core samples with different orientation are available, all of three principal components of 3D rock stress can be estimated. To realize this, we should have several boreholes drilled in different directions in a rock mass where the stress field is considered to be uniform. It is commonly carried out to dill boreholes in different directions from a mine gallery. Even in a deep borehole drilled vertically from the ground surface, the

NG09 And CTBT On-Site Inspection Noble Gas Sampling and Analysis Requirements

Science.gov (United States)

Carrigan, Charles R.; Tanaka, Junichi

2010-05-01

A provision of the Comprehensive Test Ban Treaty (CTBT) allows on-site inspections (OSIs) of suspect nuclear sites to determine if the occurrence of a detected event is nuclear in origin. For an underground nuclear explosion (UNE), the potential success of an OSI depends significantly on the containment scenario of the alleged event as well as the application of air and soil-gas radionuclide sampling techniques in a manner that takes into account both the suspect site geology and the gas transport physics. UNE scenarios may be broadly divided into categories involving the level of containment. The simplest to detect is a UNE that vents a significant portion of its radionuclide inventory and is readily detectable at distance by the International Monitoring System (IMS). The most well contained subsurface events will only be detectable during an OSI. In such cases, 37 Ar and radioactive xenon cavity gases may reach the surface through either "micro-seepage" or the barometric pumping process and only the careful siting of sampling locations, timing of sampling and application of the most site-appropriate atmospheric and soil-gas capturing methods will result in a confirmatory signal. The OSI noble gas field tests NG09 was recently held in Stupava, Slovakia to consider, in addition to other field sampling and analysis techniques, drilling and subsurface noble gas extraction methods that might be applied during an OSI. One of the experiments focused on challenges to soil-gas sampling near the soil-atmosphere interface. During withdrawal of soil gas from shallow, subsurface sample points, atmospheric dilution of the sample and the potential for introduction of unwanted atmospheric gases were considered. Tests were designed to evaluate surface infiltration and the ability of inflatable well-packers to seal out atmospheric gases during sample acquisition. We discuss these tests along with some model-based predictions regarding infiltration under different near

Hydraulic Testing of Silurian and Ordovician Strata at the Bruce Site

Science.gov (United States)

Beauheim, R. L.; Avis, J. D.; Chace, D. A.; Roberts, R. M.; Toll, N. J.

2009-05-01

Ontario Power Generation is proposing a Deep Geologic Repository (DGR) for the long-term management of its Low and Intermediate Level Radioactive Waste (L&ILW) within a Paleozoic-age sedimentary sequence beneath the Bruce Site near Tiverton, Ontario, Canada. The concept envisions that the DGR would be excavated at a depth of approximately 680 m within the Ordovician Cobourg Formation, a massive, dense, argillaceous limestone. A key attribute of the Bruce site is the extremely low permeabilities associated with the thick Ordovician carbonate and argillaceous bedrock formations that will host and enclose the DGR. Such rock mass permeabilities are thought sufficiently low to contribute toward or govern a diffusion-dominated transport regime. To support this concept, hydraulic testing was performed in 2008 and 2009 in two deep boreholes at the proposed repository site, DGR-3 and DGR-4. The hydraulic testing was performed using a straddle-packer tool with a 30.74-m test interval. Sequential tests were performed over the entire open lengths of the boreholes from the F Unit of the Silurian Salina Formation into the Ordovician Gull River Formation, a distance of approximately 635 m. The tests consisted primarily of pressure-pulse tests, with a few slug tests performed in several of the higher permeability Silurian units. The tests are analyzed using the nSIGHTS code, which allows the entire pressure history a test interval has experienced since it was penetrated by the drill bit to be included in the test simulation. nSIGHTS also allows the model fit to the test data to be optimized over an n-dimensional parameter space to ensure that the final solution represents a true global minimum rather than simply a local minimum. The test results show that the Ordovician-age strata above the Coboconk Formation (70+ m below the Cobourg) have average horizontal hydraulic conductivities of 1E-13 m/s or less. Coboconk and Gull River hydraulic conductivities are as high as 1E-11 m

WE-EF-BRA-03: Catheter- Free Ablation with External Photon Radiation: Treatment Planning, Delivery Considerations, and Correlation of Effects with Delivered Dose

International Nuclear Information System (INIS)

Deisher, A; Anderson, S; Cusma, J; Herman, M; Johnson, S; Lehmann, H; Packer, D; Parker, K; Song, L; Takami, M; Kruse, J

2015-01-01

. Feasibility of delivery to the pulmonary veins and left ventricular myocardium will be investigated in future studies. D. Packer Disclosures: Abiomed, Biosense Webster, Inc., Boston Scientific Corp., CardioFocus, Inc., Johnson and Johnson, Excerpta Medica, Ortho-McNeil-Jannsen, Sanofi Aventis, CardioInsight Technologies, InfoBionic, SIEMENS, Medtronic, Inc., CardioDx, Inc., CardioInsight Technologies, FoxP2 Medica, Mediasphere Medical, Wiley-Blackwell, St. Jude Medical, Endosense, Thermedical, EP Advocate LLC, Hansen Medical, American Heart Association, EpiEP, NIH

WE-EF-BRA-03: Catheter- Free Ablation with External Photon Radiation: Treatment Planning, Delivery Considerations, and Correlation of Effects with Delivered Dose

Energy Technology Data Exchange (ETDEWEB)

Deisher, A; Anderson, S; Cusma, J; Herman, M; Johnson, S; Lehmann, H; Packer, D; Parker, K; Song, L; Takami, M; Kruse, J [Mayo Clinic, Rochester, MN (United States)

2015-06-15

. Feasibility of delivery to the pulmonary veins and left ventricular myocardium will be investigated in future studies. D. Packer Disclosures: Abiomed, Biosense Webster, Inc., Boston Scientific Corp., CardioFocus, Inc., Johnson and Johnson, Excerpta Medica, Ortho-McNeil-Jannsen, Sanofi Aventis, CardioInsight Technologies, InfoBionic, SIEMENS, Medtronic, Inc., CardioDx, Inc., CardioInsight Technologies, FoxP2 Medica, Mediasphere Medical, Wiley-Blackwell, St. Jude Medical, Endosense, Thermedical, EP Advocate LLC, Hansen Medical, American Heart Association, EpiEP, NIH.

Multi-Scale Thermal Heat Tracer Tests for Characterizing Transport Processes and Flow Channelling in Fractured Media: Theory and Field Experiments

Science.gov (United States)

de La Bernardie, J.; Klepikova, M.; Bour, O.; Le Borgne, T.; Dentz, M.; Guihéneuf, N.; Gerard, M. F.; Lavenant, N.

2017-12-01

The characterization of flow and transport in fractured media is particularly challenging because hydraulic conductivity and transport properties are often strongly dependent on the geometric structure of the fracture surfaces. Here we show how thermal tracer tests may be an excellent complement to conservative solute tracer tests to infer fracture geometry and flow channeling. We performed a series of thermal tracer tests at different scales in a crystalline rock aquifer at the experimental site of Ploemeur (H+ observatory network). The first type of thermal tracer tests are push-pull tracer tests at different scales. The temporal and spatial scaling of heat recovery, measured from thermal breakthrough curves, shows a clear signature of flow channeling. In particular, the late time tailing of heat recovery under channeled flow is shown to diverge from the T(t) α t-1,5 behavior expected for the classical parallel plate model and follow the scaling T(t) α 1/t(logt)2 for a simple channel modeled as a tube. Flow channeling is also manifested on the spatial scaling of heat recovery as flow channeling affects the decay of the thermal breakthrough peak amplitude and the increase of the peak time with scale. The second type of thermal tracer tests are flow-through tracer tests where a pulse of hot water was injected in a fracture isolated by a double straddle packer while pumping at the same flow rate in another fracture at a distance of about 10 meters to create a dipole flow field. Comparison with a solute tracer test performed under the same conditions also present a clear signature of flow channeling. We derive analytical expressions for the retardation and decay of the thermal breakthrough peak amplitude for different fracture geometries and show that the observed differences between thermal and solute breakthrough can be explained only by channelized flow. These results suggest that heat transport is much more sensitive to fracture heterogeneity and flow